From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001 From: Yuval Adam <_@yuv.al> Date: Wed, 30 Aug 2017 08:25:59 +0000 Subject: Initial file dump from open source release --- drivers/media/Kconfig | 211 + drivers/media/Makefile | 40 + drivers/media/common/Kconfig | 25 + drivers/media/common/Makefile | 5 + drivers/media/common/b2c2/Kconfig | 23 + drivers/media/common/b2c2/Makefile | 8 + drivers/media/common/b2c2/flexcop-common.h | 185 + drivers/media/common/b2c2/flexcop-eeprom.c | 147 + drivers/media/common/b2c2/flexcop-fe-tuner.c | 678 ++ drivers/media/common/b2c2/flexcop-hw-filter.c | 232 + drivers/media/common/b2c2/flexcop-i2c.c | 288 + drivers/media/common/b2c2/flexcop-misc.c | 86 + drivers/media/common/b2c2/flexcop-reg.h | 166 + drivers/media/common/b2c2/flexcop-sram.c | 363 + drivers/media/common/b2c2/flexcop.c | 325 + drivers/media/common/b2c2/flexcop.h | 29 + drivers/media/common/b2c2/flexcop_ibi_value_be.h | 455 ++ drivers/media/common/b2c2/flexcop_ibi_value_le.h | 455 ++ drivers/media/common/btcx-risc.c | 260 + drivers/media/common/btcx-risc.h | 34 + drivers/media/common/cx2341x.c | 1726 +++++ drivers/media/common/cypress_firmware.c | 132 + drivers/media/common/cypress_firmware.h | 28 + drivers/media/common/saa7146/Kconfig | 9 + drivers/media/common/saa7146/Makefile | 5 + drivers/media/common/saa7146/saa7146_core.c | 592 ++ drivers/media/common/saa7146/saa7146_fops.c | 663 ++ drivers/media/common/saa7146/saa7146_hlp.c | 1048 +++ drivers/media/common/saa7146/saa7146_i2c.c | 423 + drivers/media/common/saa7146/saa7146_vbi.c | 498 ++ drivers/media/common/saa7146/saa7146_video.c | 1332 ++++ drivers/media/common/siano/Kconfig | 31 + drivers/media/common/siano/Makefile | 16 + drivers/media/common/siano/sms-cards.c | 358 + drivers/media/common/siano/sms-cards.h | 137 + drivers/media/common/siano/smscoreapi.c | 2199 ++++++ drivers/media/common/siano/smscoreapi.h | 1192 +++ drivers/media/common/siano/smsdvb-debugfs.c | 551 ++ drivers/media/common/siano/smsdvb-main.c | 1231 +++ drivers/media/common/siano/smsdvb.h | 130 + drivers/media/common/siano/smsendian.c | 103 + drivers/media/common/siano/smsendian.h | 32 + drivers/media/common/siano/smsir.c | 114 + drivers/media/common/siano/smsir.h | 63 + drivers/media/common/tveeprom.c | 786 ++ drivers/media/dvb-core/Kconfig | 29 + drivers/media/dvb-core/Makefile | 11 + drivers/media/dvb-core/demux.h | 241 + drivers/media/dvb-core/dmxdev.c | 1272 +++ drivers/media/dvb-core/dmxdev.h | 119 + drivers/media/dvb-core/dvb-usb-ids.h | 370 + drivers/media/dvb-core/dvb_ca_en50221.c | 1765 +++++ drivers/media/dvb-core/dvb_ca_en50221.h | 136 + drivers/media/dvb-core/dvb_demux.c | 1320 ++++ drivers/media/dvb-core/dvb_demux.h | 151 + drivers/media/dvb-core/dvb_filter.c | 603 ++ drivers/media/dvb-core/dvb_filter.h | 246 + drivers/media/dvb-core/dvb_frontend.c | 2696 +++++++ drivers/media/dvb-core/dvb_frontend.h | 437 ++ drivers/media/dvb-core/dvb_math.c | 145 + drivers/media/dvb-core/dvb_math.h | 58 + drivers/media/dvb-core/dvb_net.c | 1538 ++++ drivers/media/dvb-core/dvb_net.h | 67 + drivers/media/dvb-core/dvb_ringbuffer.c | 299 + drivers/media/dvb-core/dvb_ringbuffer.h | 186 + drivers/media/dvb-core/dvbdev.c | 505 ++ drivers/media/dvb-core/dvbdev.h | 146 + drivers/media/dvb-frontends/Kconfig | 748 ++ drivers/media/dvb-frontends/Makefile | 106 + drivers/media/dvb-frontends/a8293.c | 167 + drivers/media/dvb-frontends/a8293.h | 42 + drivers/media/dvb-frontends/af9013.c | 1558 ++++ drivers/media/dvb-frontends/af9013.h | 118 + drivers/media/dvb-frontends/af9013_priv.h | 909 +++ drivers/media/dvb-frontends/af9033.c | 1123 +++ drivers/media/dvb-frontends/af9033.h | 93 + drivers/media/dvb-frontends/af9033_priv.h | 2055 +++++ drivers/media/dvb-frontends/atbm8830.c | 508 ++ drivers/media/dvb-frontends/atbm8830.h | 76 + drivers/media/dvb-frontends/atbm8830_priv.h | 75 + drivers/media/dvb-frontends/au8522.h | 98 + drivers/media/dvb-frontends/au8522_common.c | 277 + drivers/media/dvb-frontends/au8522_decoder.c | 790 ++ drivers/media/dvb-frontends/au8522_dig.c | 828 ++ drivers/media/dvb-frontends/au8522_priv.h | 444 ++ drivers/media/dvb-frontends/bcm3510.c | 869 +++ drivers/media/dvb-frontends/bcm3510.h | 49 + drivers/media/dvb-frontends/bcm3510_priv.h | 460 ++ drivers/media/dvb-frontends/bsbe1-d01a.h | 146 + drivers/media/dvb-frontends/bsbe1.h | 106 + drivers/media/dvb-frontends/bsru6.h | 143 + drivers/media/dvb-frontends/cx22700.c | 443 ++ drivers/media/dvb-frontends/cx22700.h | 46 + drivers/media/dvb-frontends/cx22702.c | 653 ++ drivers/media/dvb-frontends/cx22702.h | 58 + drivers/media/dvb-frontends/cx24110.c | 666 ++ drivers/media/dvb-frontends/cx24110.h | 61 + drivers/media/dvb-frontends/cx24113.c | 618 ++ drivers/media/dvb-frontends/cx24113.h | 54 + drivers/media/dvb-frontends/cx24116.c | 1508 ++++ drivers/media/dvb-frontends/cx24116.h | 58 + drivers/media/dvb-frontends/cx24123.c | 1151 +++ drivers/media/dvb-frontends/cx24123.h | 61 + drivers/media/dvb-frontends/cxd2820r.h | 88 + drivers/media/dvb-frontends/cxd2820r_c.c | 343 + drivers/media/dvb-frontends/cxd2820r_core.c | 776 ++ drivers/media/dvb-frontends/cxd2820r_priv.h | 148 + drivers/media/dvb-frontends/cxd2820r_t.c | 449 ++ drivers/media/dvb-frontends/cxd2820r_t2.c | 440 ++ drivers/media/dvb-frontends/dib0070.c | 780 ++ drivers/media/dvb-frontends/dib0070.h | 76 + drivers/media/dvb-frontends/dib0090.c | 2668 +++++++ drivers/media/dvb-frontends/dib0090.h | 187 + drivers/media/dvb-frontends/dib3000.h | 56 + drivers/media/dvb-frontends/dib3000mb.c | 829 ++ drivers/media/dvb-frontends/dib3000mb_priv.h | 556 ++ drivers/media/dvb-frontends/dib3000mc.c | 940 +++ drivers/media/dvb-frontends/dib3000mc.h | 86 + drivers/media/dvb-frontends/dib7000m.c | 1473 ++++ drivers/media/dvb-frontends/dib7000m.h | 91 + drivers/media/dvb-frontends/dib7000p.c | 2472 ++++++ drivers/media/dvb-frontends/dib7000p.h | 166 + drivers/media/dvb-frontends/dib8000.c | 3992 ++++++++++ drivers/media/dvb-frontends/dib8000.h | 176 + drivers/media/dvb-frontends/dib9000.c | 2590 +++++++ drivers/media/dvb-frontends/dib9000.h | 131 + drivers/media/dvb-frontends/dibx000_common.c | 515 ++ drivers/media/dvb-frontends/dibx000_common.h | 281 + drivers/media/dvb-frontends/drxd.h | 73 + drivers/media/dvb-frontends/drxd_firm.c | 929 +++ drivers/media/dvb-frontends/drxd_firm.h | 115 + drivers/media/dvb-frontends/drxd_hard.c | 2997 ++++++++ drivers/media/dvb-frontends/drxd_map_firm.h | 1013 +++ drivers/media/dvb-frontends/drxk.h | 68 + drivers/media/dvb-frontends/drxk_hard.c | 6836 +++++++++++++++++ drivers/media/dvb-frontends/drxk_hard.h | 362 + drivers/media/dvb-frontends/drxk_map.h | 454 ++ drivers/media/dvb-frontends/ds3000.c | 1141 +++ drivers/media/dvb-frontends/ds3000.h | 50 + drivers/media/dvb-frontends/dvb-pll.c | 820 ++ drivers/media/dvb-frontends/dvb-pll.h | 57 + drivers/media/dvb-frontends/dvb_dummy_fe.c | 267 + drivers/media/dvb-frontends/dvb_dummy_fe.h | 51 + drivers/media/dvb-frontends/ec100.c | 345 + drivers/media/dvb-frontends/ec100.h | 46 + drivers/media/dvb-frontends/eds1547.h | 133 + drivers/media/dvb-frontends/hd29l2.c | 866 +++ drivers/media/dvb-frontends/hd29l2.h | 66 + drivers/media/dvb-frontends/hd29l2_priv.h | 301 + drivers/media/dvb-frontends/isl6405.c | 164 + drivers/media/dvb-frontends/isl6405.h | 74 + drivers/media/dvb-frontends/isl6421.c | 167 + drivers/media/dvb-frontends/isl6421.h | 55 + drivers/media/dvb-frontends/isl6423.c | 308 + drivers/media/dvb-frontends/isl6423.h | 63 + drivers/media/dvb-frontends/it913x-fe-priv.h | 1051 +++ drivers/media/dvb-frontends/it913x-fe.c | 1045 +++ drivers/media/dvb-frontends/it913x-fe.h | 237 + drivers/media/dvb-frontends/itd1000.c | 410 + drivers/media/dvb-frontends/itd1000.h | 42 + drivers/media/dvb-frontends/itd1000_priv.h | 88 + drivers/media/dvb-frontends/ix2505v.c | 325 + drivers/media/dvb-frontends/ix2505v.h | 64 + drivers/media/dvb-frontends/l64781.c | 609 ++ drivers/media/dvb-frontends/l64781.h | 46 + drivers/media/dvb-frontends/lg2160.c | 1464 ++++ drivers/media/dvb-frontends/lg2160.h | 84 + drivers/media/dvb-frontends/lgdt3305.c | 1222 +++ drivers/media/dvb-frontends/lgdt3305.h | 91 + drivers/media/dvb-frontends/lgdt330x.c | 831 ++ drivers/media/dvb-frontends/lgdt330x.h | 73 + drivers/media/dvb-frontends/lgdt330x_priv.h | 77 + drivers/media/dvb-frontends/lgs8gl5.c | 453 ++ drivers/media/dvb-frontends/lgs8gl5.h | 45 + drivers/media/dvb-frontends/lgs8gxx.c | 1075 +++ drivers/media/dvb-frontends/lgs8gxx.h | 95 + drivers/media/dvb-frontends/lgs8gxx_priv.h | 70 + drivers/media/dvb-frontends/lnbh24.h | 56 + drivers/media/dvb-frontends/lnbp21.c | 188 + drivers/media/dvb-frontends/lnbp21.h | 76 + drivers/media/dvb-frontends/lnbp22.c | 148 + drivers/media/dvb-frontends/lnbp22.h | 58 + drivers/media/dvb-frontends/m88rs2000.c | 819 ++ drivers/media/dvb-frontends/m88rs2000.h | 62 + drivers/media/dvb-frontends/mb86a16.c | 1878 +++++ drivers/media/dvb-frontends/mb86a16.h | 52 + drivers/media/dvb-frontends/mb86a16_priv.h | 151 + drivers/media/dvb-frontends/mb86a20s.c | 2160 ++++++ drivers/media/dvb-frontends/mb86a20s.h | 56 + drivers/media/dvb-frontends/mt312.c | 847 ++ drivers/media/dvb-frontends/mt312.h | 51 + drivers/media/dvb-frontends/mt312_priv.h | 165 + drivers/media/dvb-frontends/mt352.c | 610 ++ drivers/media/dvb-frontends/mt352.h | 73 + drivers/media/dvb-frontends/mt352_priv.h | 127 + drivers/media/dvb-frontends/nxt200x.c | 1251 +++ drivers/media/dvb-frontends/nxt200x.h | 63 + drivers/media/dvb-frontends/nxt6000.c | 616 ++ drivers/media/dvb-frontends/nxt6000.h | 48 + drivers/media/dvb-frontends/nxt6000_priv.h | 286 + drivers/media/dvb-frontends/or51132.c | 631 ++ drivers/media/dvb-frontends/or51132.h | 55 + drivers/media/dvb-frontends/or51211.c | 570 ++ drivers/media/dvb-frontends/or51211.h | 53 + drivers/media/dvb-frontends/rtl2830.c | 771 ++ drivers/media/dvb-frontends/rtl2830.h | 90 + drivers/media/dvb-frontends/rtl2830_priv.h | 45 + drivers/media/dvb-frontends/rtl2832.c | 987 +++ drivers/media/dvb-frontends/rtl2832.h | 76 + drivers/media/dvb-frontends/rtl2832_priv.h | 370 + drivers/media/dvb-frontends/s5h1409.c | 1029 +++ drivers/media/dvb-frontends/s5h1409.h | 88 + drivers/media/dvb-frontends/s5h1411.c | 951 +++ drivers/media/dvb-frontends/s5h1411.h | 90 + drivers/media/dvb-frontends/s5h1420.c | 967 +++ drivers/media/dvb-frontends/s5h1420.h | 61 + drivers/media/dvb-frontends/s5h1420_priv.h | 102 + drivers/media/dvb-frontends/s5h1432.c | 403 + drivers/media/dvb-frontends/s5h1432.h | 91 + drivers/media/dvb-frontends/s921.c | 544 ++ drivers/media/dvb-frontends/s921.h | 47 + drivers/media/dvb-frontends/si21xx.c | 951 +++ drivers/media/dvb-frontends/si21xx.h | 37 + drivers/media/dvb-frontends/sp8870.c | 620 ++ drivers/media/dvb-frontends/sp8870.h | 50 + drivers/media/dvb-frontends/sp887x.c | 629 ++ drivers/media/dvb-frontends/sp887x.h | 32 + drivers/media/dvb-frontends/stb0899_algo.c | 1525 ++++ drivers/media/dvb-frontends/stb0899_cfg.h | 287 + drivers/media/dvb-frontends/stb0899_drv.c | 1662 ++++ drivers/media/dvb-frontends/stb0899_drv.h | 162 + drivers/media/dvb-frontends/stb0899_priv.h | 263 + drivers/media/dvb-frontends/stb0899_reg.h | 2027 +++++ drivers/media/dvb-frontends/stb6000.c | 256 + drivers/media/dvb-frontends/stb6000.h | 51 + drivers/media/dvb-frontends/stb6100.c | 616 ++ drivers/media/dvb-frontends/stb6100.h | 115 + drivers/media/dvb-frontends/stb6100_cfg.h | 104 + drivers/media/dvb-frontends/stb6100_proc.h | 138 + drivers/media/dvb-frontends/stv0288.c | 626 ++ drivers/media/dvb-frontends/stv0288.h | 67 + drivers/media/dvb-frontends/stv0297.c | 722 ++ drivers/media/dvb-frontends/stv0297.h | 57 + drivers/media/dvb-frontends/stv0299.c | 762 ++ drivers/media/dvb-frontends/stv0299.h | 118 + drivers/media/dvb-frontends/stv0367.c | 3462 +++++++++ drivers/media/dvb-frontends/stv0367.h | 66 + drivers/media/dvb-frontends/stv0367_priv.h | 212 + drivers/media/dvb-frontends/stv0367_regs.h | 3614 +++++++++ drivers/media/dvb-frontends/stv0900.h | 74 + drivers/media/dvb-frontends/stv0900_core.c | 1979 +++++ drivers/media/dvb-frontends/stv0900_init.h | 584 ++ drivers/media/dvb-frontends/stv0900_priv.h | 408 + drivers/media/dvb-frontends/stv0900_reg.h | 3984 ++++++++++ drivers/media/dvb-frontends/stv0900_sw.c | 2029 +++++ drivers/media/dvb-frontends/stv090x.c | 4990 ++++++++++++ drivers/media/dvb-frontends/stv090x.h | 134 + drivers/media/dvb-frontends/stv090x_priv.h | 279 + drivers/media/dvb-frontends/stv090x_reg.h | 2371 ++++++ drivers/media/dvb-frontends/stv6110.c | 461 ++ drivers/media/dvb-frontends/stv6110.h | 63 + drivers/media/dvb-frontends/stv6110x.c | 416 + drivers/media/dvb-frontends/stv6110x.h | 73 + drivers/media/dvb-frontends/stv6110x_priv.h | 76 + drivers/media/dvb-frontends/stv6110x_reg.h | 82 + drivers/media/dvb-frontends/tda10021.c | 528 ++ drivers/media/dvb-frontends/tda10023.c | 610 ++ drivers/media/dvb-frontends/tda1002x.h | 86 + drivers/media/dvb-frontends/tda10048.c | 1191 +++ drivers/media/dvb-frontends/tda10048.h | 90 + drivers/media/dvb-frontends/tda1004x.c | 1385 ++++ drivers/media/dvb-frontends/tda1004x.h | 149 + drivers/media/dvb-frontends/tda10071.c | 1322 ++++ drivers/media/dvb-frontends/tda10071.h | 87 + drivers/media/dvb-frontends/tda10071_priv.h | 109 + drivers/media/dvb-frontends/tda10086.c | 777 ++ drivers/media/dvb-frontends/tda10086.h | 61 + drivers/media/dvb-frontends/tda18271c2dd.c | 1257 +++ drivers/media/dvb-frontends/tda18271c2dd.h | 18 + drivers/media/dvb-frontends/tda18271c2dd_maps.h | 814 ++ drivers/media/dvb-frontends/tda665x.c | 254 + drivers/media/dvb-frontends/tda665x.h | 52 + drivers/media/dvb-frontends/tda8083.c | 487 ++ drivers/media/dvb-frontends/tda8083.h | 50 + drivers/media/dvb-frontends/tda8261.c | 230 + drivers/media/dvb-frontends/tda8261.h | 55 + drivers/media/dvb-frontends/tda8261_cfg.h | 84 + drivers/media/dvb-frontends/tda826x.c | 188 + drivers/media/dvb-frontends/tda826x.h | 53 + drivers/media/dvb-frontends/tdhd1.h | 74 + drivers/media/dvb-frontends/ts2020.c | 373 + drivers/media/dvb-frontends/ts2020.h | 50 + drivers/media/dvb-frontends/tua6100.c | 206 + drivers/media/dvb-frontends/tua6100.h | 47 + drivers/media/dvb-frontends/ves1820.c | 447 ++ drivers/media/dvb-frontends/ves1820.h | 56 + drivers/media/dvb-frontends/ves1x93.c | 553 ++ drivers/media/dvb-frontends/ves1x93.h | 55 + drivers/media/dvb-frontends/z0194a.h | 85 + drivers/media/dvb-frontends/zl10036.c | 520 ++ drivers/media/dvb-frontends/zl10036.h | 53 + drivers/media/dvb-frontends/zl10039.c | 317 + drivers/media/dvb-frontends/zl10039.h | 41 + drivers/media/dvb-frontends/zl10353.c | 684 ++ drivers/media/dvb-frontends/zl10353.h | 62 + drivers/media/dvb-frontends/zl10353_priv.h | 79 + drivers/media/firewire/Kconfig | 19 + drivers/media/firewire/Makefile | 6 + drivers/media/firewire/firedtv-avc.c | 1457 ++++ drivers/media/firewire/firedtv-ci.c | 258 + drivers/media/firewire/firedtv-dvb.c | 248 + drivers/media/firewire/firedtv-fe.c | 254 + drivers/media/firewire/firedtv-fw.c | 429 ++ drivers/media/firewire/firedtv-rc.c | 196 + drivers/media/firewire/firedtv.h | 169 + drivers/media/i2c/Kconfig | 637 ++ drivers/media/i2c/Makefile | 72 + drivers/media/i2c/ad9389b.c | 1328 ++++ drivers/media/i2c/adp1653.c | 487 ++ drivers/media/i2c/adv7170.c | 410 + drivers/media/i2c/adv7175.c | 460 ++ drivers/media/i2c/adv7180.c | 668 ++ drivers/media/i2c/adv7183.c | 688 ++ drivers/media/i2c/adv7183_regs.h | 107 + drivers/media/i2c/adv7343.c | 499 ++ drivers/media/i2c/adv7343_regs.h | 181 + drivers/media/i2c/adv7393.c | 487 ++ drivers/media/i2c/adv7393_regs.h | 188 + drivers/media/i2c/adv7604.c | 2136 ++++++ drivers/media/i2c/ak881x.c | 359 + drivers/media/i2c/aptina-pll.c | 173 + drivers/media/i2c/aptina-pll.h | 56 + drivers/media/i2c/as3645a.c | 888 +++ drivers/media/i2c/bt819.c | 517 ++ drivers/media/i2c/bt856.c | 273 + drivers/media/i2c/bt866.c | 243 + drivers/media/i2c/cs5345.c | 252 + drivers/media/i2c/cs53l32a.c | 251 + drivers/media/i2c/cx25840/Kconfig | 8 + drivers/media/i2c/cx25840/Makefile | 6 + drivers/media/i2c/cx25840/cx25840-audio.c | 571 ++ drivers/media/i2c/cx25840/cx25840-core.c | 5340 +++++++++++++ drivers/media/i2c/cx25840/cx25840-core.h | 137 + drivers/media/i2c/cx25840/cx25840-firmware.c | 175 + drivers/media/i2c/cx25840/cx25840-ir.c | 1279 ++++ drivers/media/i2c/cx25840/cx25840-vbi.c | 257 + drivers/media/i2c/ir-kbd-i2c.c | 501 ++ drivers/media/i2c/ks0127.c | 733 ++ drivers/media/i2c/ks0127.h | 51 + drivers/media/i2c/m52790.c | 216 + drivers/media/i2c/m5mols/Kconfig | 6 + drivers/media/i2c/m5mols/Makefile | 3 + drivers/media/i2c/m5mols/m5mols.h | 348 + drivers/media/i2c/m5mols/m5mols_capture.c | 158 + drivers/media/i2c/m5mols/m5mols_controls.c | 628 ++ drivers/media/i2c/m5mols/m5mols_core.c | 1057 +++ drivers/media/i2c/m5mols/m5mols_reg.h | 363 + drivers/media/i2c/msp3400-driver.c | 927 +++ drivers/media/i2c/msp3400-driver.h | 137 + drivers/media/i2c/msp3400-kthreads.c | 1165 +++ drivers/media/i2c/mt9m032.c | 900 +++ drivers/media/i2c/mt9p031.c | 1086 +++ drivers/media/i2c/mt9t001.c | 841 ++ drivers/media/i2c/mt9v011.c | 623 ++ drivers/media/i2c/mt9v032.c | 869 +++ drivers/media/i2c/noon010pc30.c | 844 ++ drivers/media/i2c/ov7640.c | 106 + drivers/media/i2c/ov7670.c | 1683 ++++ drivers/media/i2c/ov9650.c | 1562 ++++ drivers/media/i2c/s5c73m3/Makefile | 2 + drivers/media/i2c/s5c73m3/s5c73m3-core.c | 1715 +++++ drivers/media/i2c/s5c73m3/s5c73m3-ctrls.c | 563 ++ drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 156 + drivers/media/i2c/s5c73m3/s5c73m3.h | 459 ++ drivers/media/i2c/s5k4ecgx.c | 1036 +++ drivers/media/i2c/s5k6aa.c | 1661 ++++ drivers/media/i2c/saa6588.c | 542 ++ drivers/media/i2c/saa7110.c | 494 ++ drivers/media/i2c/saa7115.c | 1740 +++++ drivers/media/i2c/saa711x_regs.h | 549 ++ drivers/media/i2c/saa7127.c | 852 ++ drivers/media/i2c/saa717x.c | 1378 ++++ drivers/media/i2c/saa7185.c | 377 + drivers/media/i2c/saa7191.c | 659 ++ drivers/media/i2c/saa7191.h | 245 + drivers/media/i2c/smiapp-pll.c | 443 ++ drivers/media/i2c/smiapp-pll.h | 114 + drivers/media/i2c/smiapp/Kconfig | 7 + drivers/media/i2c/smiapp/Makefile | 5 + drivers/media/i2c/smiapp/smiapp-core.c | 2892 +++++++ drivers/media/i2c/smiapp/smiapp-limits.c | 132 + drivers/media/i2c/smiapp/smiapp-limits.h | 128 + drivers/media/i2c/smiapp/smiapp-quirk.c | 286 + drivers/media/i2c/smiapp/smiapp-quirk.h | 83 + drivers/media/i2c/smiapp/smiapp-reg-defs.h | 503 ++ drivers/media/i2c/smiapp/smiapp-reg.h | 122 + drivers/media/i2c/smiapp/smiapp-regs.c | 273 + drivers/media/i2c/smiapp/smiapp-regs.h | 49 + drivers/media/i2c/smiapp/smiapp.h | 252 + drivers/media/i2c/soc_camera/Kconfig | 87 + drivers/media/i2c/soc_camera/Makefile | 14 + drivers/media/i2c/soc_camera/imx074.c | 486 ++ drivers/media/i2c/soc_camera/mt9m001.c | 751 ++ drivers/media/i2c/soc_camera/mt9m111.c | 1041 +++ drivers/media/i2c/soc_camera/mt9t031.c | 851 ++ drivers/media/i2c/soc_camera/mt9t112.c | 1145 +++ drivers/media/i2c/soc_camera/mt9v022.c | 998 +++ drivers/media/i2c/soc_camera/ov2640.c | 1153 +++ drivers/media/i2c/soc_camera/ov5642.c | 1077 +++ drivers/media/i2c/soc_camera/ov6650.c | 1063 +++ drivers/media/i2c/soc_camera/ov772x.c | 1129 +++ drivers/media/i2c/soc_camera/ov9640.c | 756 ++ drivers/media/i2c/soc_camera/ov9640.h | 207 + drivers/media/i2c/soc_camera/ov9740.c | 1013 +++ drivers/media/i2c/soc_camera/rj54n1cb0c.c | 1424 ++++ drivers/media/i2c/soc_camera/tw9910.c | 965 +++ drivers/media/i2c/sony-btf-mpx.c | 399 + drivers/media/i2c/sr030pc30.c | 871 +++ drivers/media/i2c/tcm825x.c | 937 +++ drivers/media/i2c/tcm825x.h | 200 + drivers/media/i2c/tda7432.c | 429 ++ drivers/media/i2c/tda9840.c | 224 + drivers/media/i2c/tea6415c.c | 187 + drivers/media/i2c/tea6415c.h | 27 + drivers/media/i2c/tea6420.c | 169 + drivers/media/i2c/tea6420.h | 24 + drivers/media/i2c/ths7303.c | 446 ++ drivers/media/i2c/tlv320aic23b.c | 230 + drivers/media/i2c/tvaudio.c | 2069 +++++ drivers/media/i2c/tvp514x.c | 1244 +++ drivers/media/i2c/tvp514x_regs.h | 287 + drivers/media/i2c/tvp5150.c | 1267 +++ drivers/media/i2c/tvp5150_reg.h | 139 + drivers/media/i2c/tvp7002.c | 1049 +++ drivers/media/i2c/tvp7002_reg.h | 150 + drivers/media/i2c/tw2804.c | 453 ++ drivers/media/i2c/tw9903.c | 279 + drivers/media/i2c/tw9906.c | 247 + drivers/media/i2c/uda1342.c | 113 + drivers/media/i2c/upd64031a.c | 274 + drivers/media/i2c/upd64083.c | 246 + drivers/media/i2c/vp27smpx.c | 211 + drivers/media/i2c/vpx3220.c | 591 ++ drivers/media/i2c/vs6624.c | 917 +++ drivers/media/i2c/vs6624_regs.h | 337 + drivers/media/i2c/wm8739.c | 294 + drivers/media/i2c/wm8775.c | 340 + drivers/media/media-device.c | 462 ++ drivers/media/media-devnode.c | 346 + drivers/media/media-entity.c | 593 ++ drivers/media/mmc/Kconfig | 2 + drivers/media/mmc/Makefile | 1 + drivers/media/mmc/siano/Kconfig | 11 + drivers/media/mmc/siano/Makefile | 6 + drivers/media/mmc/siano/smssdio.c | 378 + drivers/media/parport/Kconfig | 53 + drivers/media/parport/Makefile | 4 + drivers/media/parport/bw-qcam.c | 1176 +++ drivers/media/parport/c-qcam.c | 883 +++ drivers/media/parport/pms.c | 1152 +++ drivers/media/parport/w9966.c | 981 +++ drivers/media/pci/Kconfig | 49 + drivers/media/pci/Makefile | 26 + drivers/media/pci/b2c2/Kconfig | 15 + drivers/media/pci/b2c2/Makefile | 9 + drivers/media/pci/b2c2/flexcop-dma.c | 172 + drivers/media/pci/b2c2/flexcop-pci.c | 450 ++ drivers/media/pci/bt8xx/Kconfig | 43 + drivers/media/pci/bt8xx/Makefile | 12 + drivers/media/pci/bt8xx/bt848.h | 369 + drivers/media/pci/bt8xx/bt878.c | 608 ++ drivers/media/pci/bt8xx/bt878.h | 159 + drivers/media/pci/bt8xx/bttv-audio-hook.c | 382 + drivers/media/pci/bt8xx/bttv-audio-hook.h | 23 + drivers/media/pci/bt8xx/bttv-cards.c | 4900 ++++++++++++ drivers/media/pci/bt8xx/bttv-driver.c | 4481 +++++++++++ drivers/media/pci/bt8xx/bttv-gpio.c | 189 + drivers/media/pci/bt8xx/bttv-i2c.c | 404 + drivers/media/pci/bt8xx/bttv-if.c | 121 + drivers/media/pci/bt8xx/bttv-input.c | 585 ++ drivers/media/pci/bt8xx/bttv-risc.c | 909 +++ drivers/media/pci/bt8xx/bttv-vbi.c | 459 ++ drivers/media/pci/bt8xx/bttv.h | 379 + drivers/media/pci/bt8xx/bttvp.h | 538 ++ drivers/media/pci/bt8xx/dst.c | 1873 +++++ drivers/media/pci/bt8xx/dst_ca.c | 726 ++ drivers/media/pci/bt8xx/dst_ca.h | 58 + drivers/media/pci/bt8xx/dst_common.h | 182 + drivers/media/pci/bt8xx/dst_priv.h | 35 + drivers/media/pci/bt8xx/dvb-bt8xx.c | 976 +++ drivers/media/pci/bt8xx/dvb-bt8xx.h | 63 + drivers/media/pci/cx18/Kconfig | 35 + drivers/media/pci/cx18/Makefile | 13 + drivers/media/pci/cx18/cx18-alsa-main.c | 295 + drivers/media/pci/cx18/cx18-alsa-mixer.c | 175 + drivers/media/pci/cx18/cx18-alsa-mixer.h | 23 + drivers/media/pci/cx18/cx18-alsa-pcm.c | 357 + drivers/media/pci/cx18/cx18-alsa-pcm.h | 27 + drivers/media/pci/cx18/cx18-alsa.h | 75 + drivers/media/pci/cx18/cx18-audio.c | 92 + drivers/media/pci/cx18/cx18-audio.h | 24 + drivers/media/pci/cx18/cx18-av-audio.c | 471 ++ drivers/media/pci/cx18/cx18-av-core.c | 1401 ++++ drivers/media/pci/cx18/cx18-av-core.h | 391 + drivers/media/pci/cx18/cx18-av-firmware.c | 225 + drivers/media/pci/cx18/cx18-av-vbi.c | 313 + drivers/media/pci/cx18/cx18-cards.c | 638 ++ drivers/media/pci/cx18/cx18-cards.h | 157 + drivers/media/pci/cx18/cx18-controls.c | 131 + drivers/media/pci/cx18/cx18-controls.h | 24 + drivers/media/pci/cx18/cx18-driver.c | 1368 ++++ drivers/media/pci/cx18/cx18-driver.h | 730 ++ drivers/media/pci/cx18/cx18-dvb.c | 609 ++ drivers/media/pci/cx18/cx18-dvb.h | 25 + drivers/media/pci/cx18/cx18-fileops.c | 881 +++ drivers/media/pci/cx18/cx18-fileops.h | 41 + drivers/media/pci/cx18/cx18-firmware.c | 459 ++ drivers/media/pci/cx18/cx18-firmware.h | 25 + drivers/media/pci/cx18/cx18-gpio.c | 347 + drivers/media/pci/cx18/cx18-gpio.h | 34 + drivers/media/pci/cx18/cx18-i2c.c | 325 + drivers/media/pci/cx18/cx18-i2c.h | 29 + drivers/media/pci/cx18/cx18-io.c | 97 + drivers/media/pci/cx18/cx18-io.h | 191 + drivers/media/pci/cx18/cx18-ioctl.c | 1182 +++ drivers/media/pci/cx18/cx18-ioctl.h | 31 + drivers/media/pci/cx18/cx18-irq.c | 81 + drivers/media/pci/cx18/cx18-irq.h | 35 + drivers/media/pci/cx18/cx18-mailbox.c | 870 +++ drivers/media/pci/cx18/cx18-mailbox.h | 95 + drivers/media/pci/cx18/cx18-queue.c | 443 ++ drivers/media/pci/cx18/cx18-queue.h | 98 + drivers/media/pci/cx18/cx18-scb.c | 122 + drivers/media/pci/cx18/cx18-scb.h | 280 + drivers/media/pci/cx18/cx18-streams.c | 1059 +++ drivers/media/pci/cx18/cx18-streams.h | 62 + drivers/media/pci/cx18/cx18-vbi.c | 277 + drivers/media/pci/cx18/cx18-vbi.h | 26 + drivers/media/pci/cx18/cx18-version.h | 28 + drivers/media/pci/cx18/cx18-video.c | 32 + drivers/media/pci/cx18/cx18-video.h | 22 + drivers/media/pci/cx18/cx23418.h | 492 ++ drivers/media/pci/cx23885/Kconfig | 53 + drivers/media/pci/cx23885/Makefile | 16 + drivers/media/pci/cx23885/altera-ci.c | 840 ++ drivers/media/pci/cx23885/altera-ci.h | 101 + drivers/media/pci/cx23885/cimax2.c | 550 ++ drivers/media/pci/cx23885/cimax2.h | 47 + drivers/media/pci/cx23885/cx23885-417.c | 1790 +++++ drivers/media/pci/cx23885/cx23885-alsa.c | 537 ++ drivers/media/pci/cx23885/cx23885-av.c | 36 + drivers/media/pci/cx23885/cx23885-av.h | 27 + drivers/media/pci/cx23885/cx23885-cards.c | 1811 +++++ drivers/media/pci/cx23885/cx23885-core.c | 2232 ++++++ drivers/media/pci/cx23885/cx23885-dvb.c | 1452 ++++ drivers/media/pci/cx23885/cx23885-f300.c | 178 + drivers/media/pci/cx23885/cx23885-f300.h | 2 + drivers/media/pci/cx23885/cx23885-i2c.c | 396 + drivers/media/pci/cx23885/cx23885-input.c | 375 + drivers/media/pci/cx23885/cx23885-input.h | 30 + drivers/media/pci/cx23885/cx23885-ioctl.c | 207 + drivers/media/pci/cx23885/cx23885-ioctl.h | 39 + drivers/media/pci/cx23885/cx23885-ir.c | 118 + drivers/media/pci/cx23885/cx23885-ir.h | 31 + drivers/media/pci/cx23885/cx23885-reg.h | 452 ++ drivers/media/pci/cx23885/cx23885-vbi.c | 295 + drivers/media/pci/cx23885/cx23885-video.c | 1939 +++++ drivers/media/pci/cx23885/cx23885.h | 656 ++ drivers/media/pci/cx23885/cx23888-ir.c | 1270 +++ drivers/media/pci/cx23885/cx23888-ir.h | 28 + drivers/media/pci/cx23885/netup-eeprom.c | 107 + drivers/media/pci/cx23885/netup-eeprom.h | 42 + drivers/media/pci/cx23885/netup-init.c | 126 + drivers/media/pci/cx23885/netup-init.h | 25 + drivers/media/pci/cx25821/Kconfig | 29 + drivers/media/pci/cx25821/Makefile | 9 + drivers/media/pci/cx25821/cx25821-alsa.c | 759 ++ drivers/media/pci/cx25821/cx25821-audio-upstream.c | 696 ++ drivers/media/pci/cx25821/cx25821-audio-upstream.h | 62 + drivers/media/pci/cx25821/cx25821-audio.h | 62 + drivers/media/pci/cx25821/cx25821-biffuncs.h | 45 + drivers/media/pci/cx25821/cx25821-cards.c | 49 + drivers/media/pci/cx25821/cx25821-core.c | 1409 ++++ drivers/media/pci/cx25821/cx25821-gpio.c | 99 + drivers/media/pci/cx25821/cx25821-i2c.c | 419 + drivers/media/pci/cx25821/cx25821-medusa-defines.h | 42 + drivers/media/pci/cx25821/cx25821-medusa-reg.h | 455 ++ drivers/media/pci/cx25821/cx25821-medusa-video.c | 743 ++ drivers/media/pci/cx25821/cx25821-medusa-video.h | 49 + drivers/media/pci/cx25821/cx25821-reg.h | 1592 ++++ drivers/media/pci/cx25821/cx25821-sram.h | 261 + drivers/media/pci/cx25821/cx25821-video-upstream.c | 676 ++ drivers/media/pci/cx25821/cx25821-video-upstream.h | 139 + drivers/media/pci/cx25821/cx25821-video.c | 1132 +++ drivers/media/pci/cx25821/cx25821-video.h | 65 + drivers/media/pci/cx25821/cx25821.h | 451 ++ drivers/media/pci/cx88/Kconfig | 88 + drivers/media/pci/cx88/Makefile | 17 + drivers/media/pci/cx88/cx88-alsa.c | 977 +++ drivers/media/pci/cx88/cx88-blackbird.c | 1300 ++++ drivers/media/pci/cx88/cx88-cards.c | 3815 +++++++++ drivers/media/pci/cx88/cx88-core.c | 1133 +++ drivers/media/pci/cx88/cx88-dsp.c | 322 + drivers/media/pci/cx88/cx88-dvb.c | 1795 +++++ drivers/media/pci/cx88/cx88-i2c.c | 183 + drivers/media/pci/cx88/cx88-input.c | 635 ++ drivers/media/pci/cx88/cx88-mpeg.c | 933 +++ drivers/media/pci/cx88/cx88-reg.h | 836 ++ drivers/media/pci/cx88/cx88-tvaudio.c | 1059 +++ drivers/media/pci/cx88/cx88-vbi.c | 245 + drivers/media/pci/cx88/cx88-video.c | 2072 +++++ drivers/media/pci/cx88/cx88-vp3054-i2c.c | 158 + drivers/media/pci/cx88/cx88-vp3054-i2c.h | 41 + drivers/media/pci/cx88/cx88.h | 749 ++ drivers/media/pci/ddbridge/Kconfig | 18 + drivers/media/pci/ddbridge/Makefile | 14 + drivers/media/pci/ddbridge/ddbridge-core.c | 1729 +++++ drivers/media/pci/ddbridge/ddbridge-regs.h | 151 + drivers/media/pci/ddbridge/ddbridge.h | 185 + drivers/media/pci/dm1105/Kconfig | 21 + drivers/media/pci/dm1105/Makefile | 3 + drivers/media/pci/dm1105/dm1105.c | 1259 +++ drivers/media/pci/ivtv/Kconfig | 61 + drivers/media/pci/ivtv/Makefile | 16 + drivers/media/pci/ivtv/ivtv-alsa-main.c | 303 + drivers/media/pci/ivtv/ivtv-alsa-mixer.c | 175 + drivers/media/pci/ivtv/ivtv-alsa-mixer.h | 23 + drivers/media/pci/ivtv/ivtv-alsa-pcm.c | 364 + drivers/media/pci/ivtv/ivtv-alsa-pcm.h | 23 + drivers/media/pci/ivtv/ivtv-alsa.h | 75 + drivers/media/pci/ivtv/ivtv-cards.c | 1370 ++++ drivers/media/pci/ivtv/ivtv-cards.h | 309 + drivers/media/pci/ivtv/ivtv-controls.c | 163 + drivers/media/pci/ivtv/ivtv-controls.h | 28 + drivers/media/pci/ivtv/ivtv-driver.c | 1535 ++++ drivers/media/pci/ivtv/ivtv-driver.h | 850 ++ drivers/media/pci/ivtv/ivtv-fileops.c | 1073 +++ drivers/media/pci/ivtv/ivtv-fileops.h | 44 + drivers/media/pci/ivtv/ivtv-firmware.c | 402 + drivers/media/pci/ivtv/ivtv-firmware.h | 31 + drivers/media/pci/ivtv/ivtv-gpio.c | 374 + drivers/media/pci/ivtv/ivtv-gpio.h | 29 + drivers/media/pci/ivtv/ivtv-i2c.c | 754 ++ drivers/media/pci/ivtv/ivtv-i2c.h | 32 + drivers/media/pci/ivtv/ivtv-ioctl.c | 1930 +++++ drivers/media/pci/ivtv/ivtv-ioctl.h | 35 + drivers/media/pci/ivtv/ivtv-irq.c | 1088 +++ drivers/media/pci/ivtv/ivtv-irq.h | 53 + drivers/media/pci/ivtv/ivtv-mailbox.c | 387 + drivers/media/pci/ivtv/ivtv-mailbox.h | 35 + drivers/media/pci/ivtv/ivtv-queue.c | 297 + drivers/media/pci/ivtv/ivtv-queue.h | 96 + drivers/media/pci/ivtv/ivtv-routing.c | 119 + drivers/media/pci/ivtv/ivtv-routing.h | 27 + drivers/media/pci/ivtv/ivtv-streams.c | 1039 +++ drivers/media/pci/ivtv/ivtv-streams.h | 37 + drivers/media/pci/ivtv/ivtv-udma.c | 234 + drivers/media/pci/ivtv/ivtv-udma.h | 48 + drivers/media/pci/ivtv/ivtv-vbi.c | 549 ++ drivers/media/pci/ivtv/ivtv-vbi.h | 34 + drivers/media/pci/ivtv/ivtv-version.h | 26 + drivers/media/pci/ivtv/ivtv-yuv.c | 1296 ++++ drivers/media/pci/ivtv/ivtv-yuv.h | 44 + drivers/media/pci/ivtv/ivtvfb.c | 1316 ++++ drivers/media/pci/mantis/Kconfig | 38 + drivers/media/pci/mantis/Makefile | 28 + drivers/media/pci/mantis/hopper_cards.c | 278 + drivers/media/pci/mantis/hopper_vp3028.c | 88 + drivers/media/pci/mantis/hopper_vp3028.h | 30 + drivers/media/pci/mantis/mantis_ca.c | 210 + drivers/media/pci/mantis/mantis_ca.h | 27 + drivers/media/pci/mantis/mantis_cards.c | 308 + drivers/media/pci/mantis/mantis_common.h | 179 + drivers/media/pci/mantis/mantis_core.c | 235 + drivers/media/pci/mantis/mantis_core.h | 57 + drivers/media/pci/mantis/mantis_dma.c | 230 + drivers/media/pci/mantis/mantis_dma.h | 30 + drivers/media/pci/mantis/mantis_dvb.c | 301 + drivers/media/pci/mantis/mantis_dvb.h | 35 + drivers/media/pci/mantis/mantis_evm.c | 117 + drivers/media/pci/mantis/mantis_hif.c | 239 + drivers/media/pci/mantis/mantis_hif.h | 29 + drivers/media/pci/mantis/mantis_i2c.c | 268 + drivers/media/pci/mantis/mantis_i2c.h | 30 + drivers/media/pci/mantis/mantis_input.c | 162 + drivers/media/pci/mantis/mantis_ioc.c | 124 + drivers/media/pci/mantis/mantis_ioc.h | 51 + drivers/media/pci/mantis/mantis_link.h | 83 + drivers/media/pci/mantis/mantis_pci.c | 170 + drivers/media/pci/mantis/mantis_pci.h | 27 + drivers/media/pci/mantis/mantis_pcmcia.c | 121 + drivers/media/pci/mantis/mantis_reg.h | 197 + drivers/media/pci/mantis/mantis_uart.c | 188 + drivers/media/pci/mantis/mantis_uart.h | 58 + drivers/media/pci/mantis/mantis_vp1033.c | 212 + drivers/media/pci/mantis/mantis_vp1033.h | 30 + drivers/media/pci/mantis/mantis_vp1034.c | 120 + drivers/media/pci/mantis/mantis_vp1034.h | 33 + drivers/media/pci/mantis/mantis_vp1041.c | 357 + drivers/media/pci/mantis/mantis_vp1041.h | 33 + drivers/media/pci/mantis/mantis_vp2033.c | 188 + drivers/media/pci/mantis/mantis_vp2033.h | 30 + drivers/media/pci/mantis/mantis_vp2040.c | 187 + drivers/media/pci/mantis/mantis_vp2040.h | 32 + drivers/media/pci/mantis/mantis_vp3028.c | 38 + drivers/media/pci/mantis/mantis_vp3028.h | 33 + drivers/media/pci/mantis/mantis_vp3030.c | 105 + drivers/media/pci/mantis/mantis_vp3030.h | 30 + drivers/media/pci/meye/Kconfig | 13 + drivers/media/pci/meye/Makefile | 1 + drivers/media/pci/meye/meye.c | 1863 +++++ drivers/media/pci/meye/meye.h | 326 + drivers/media/pci/ngene/Kconfig | 13 + drivers/media/pci/ngene/Makefile | 14 + drivers/media/pci/ngene/ngene-cards.c | 834 ++ drivers/media/pci/ngene/ngene-core.c | 1707 +++++ drivers/media/pci/ngene/ngene-dvb.c | 261 + drivers/media/pci/ngene/ngene-i2c.c | 176 + drivers/media/pci/ngene/ngene.h | 920 +++ drivers/media/pci/pluto2/Kconfig | 15 + drivers/media/pci/pluto2/Makefile | 3 + drivers/media/pci/pluto2/pluto2.c | 814 ++ drivers/media/pci/pt1/Kconfig | 12 + drivers/media/pci/pt1/Makefile | 5 + drivers/media/pci/pt1/pt1.c | 1245 +++ drivers/media/pci/pt1/va1j5jf8007s.c | 736 ++ drivers/media/pci/pt1/va1j5jf8007s.h | 46 + drivers/media/pci/pt1/va1j5jf8007t.c | 536 ++ drivers/media/pci/pt1/va1j5jf8007t.h | 46 + drivers/media/pci/saa7134/Kconfig | 64 + drivers/media/pci/saa7134/Makefile | 16 + drivers/media/pci/saa7134/saa6752hs.c | 1012 +++ drivers/media/pci/saa7134/saa7134-alsa.c | 1211 +++ drivers/media/pci/saa7134/saa7134-cards.c | 8097 ++++++++++++++++++++ drivers/media/pci/saa7134/saa7134-core.c | 1366 ++++ drivers/media/pci/saa7134/saa7134-dvb.c | 1964 +++++ drivers/media/pci/saa7134/saa7134-empress.c | 590 ++ drivers/media/pci/saa7134/saa7134-i2c.c | 436 ++ drivers/media/pci/saa7134/saa7134-input.c | 1044 +++ drivers/media/pci/saa7134/saa7134-reg.h | 378 + drivers/media/pci/saa7134/saa7134-ts.c | 327 + drivers/media/pci/saa7134/saa7134-tvaudio.c | 1088 +++ drivers/media/pci/saa7134/saa7134-vbi.c | 255 + drivers/media/pci/saa7134/saa7134-video.c | 2607 +++++++ drivers/media/pci/saa7134/saa7134.h | 859 +++ drivers/media/pci/saa7146/Kconfig | 38 + drivers/media/pci/saa7146/Makefile | 5 + drivers/media/pci/saa7146/hexium_gemini.c | 430 ++ drivers/media/pci/saa7146/hexium_orion.c | 502 ++ drivers/media/pci/saa7146/mxb.c | 885 +++ drivers/media/pci/saa7164/Kconfig | 18 + drivers/media/pci/saa7164/Makefile | 12 + drivers/media/pci/saa7164/saa7164-api.c | 1526 ++++ drivers/media/pci/saa7164/saa7164-buffer.c | 322 + drivers/media/pci/saa7164/saa7164-bus.c | 475 ++ drivers/media/pci/saa7164/saa7164-cards.c | 773 ++ drivers/media/pci/saa7164/saa7164-cmd.c | 589 ++ drivers/media/pci/saa7164/saa7164-core.c | 1490 ++++ drivers/media/pci/saa7164/saa7164-dvb.c | 556 ++ drivers/media/pci/saa7164/saa7164-encoder.c | 1503 ++++ drivers/media/pci/saa7164/saa7164-fw.c | 613 ++ drivers/media/pci/saa7164/saa7164-i2c.c | 125 + drivers/media/pci/saa7164/saa7164-reg.h | 219 + drivers/media/pci/saa7164/saa7164-types.h | 442 ++ drivers/media/pci/saa7164/saa7164-vbi.c | 1376 ++++ drivers/media/pci/saa7164/saa7164.h | 616 ++ drivers/media/pci/sta2x11/Kconfig | 13 + drivers/media/pci/sta2x11/Makefile | 1 + drivers/media/pci/sta2x11/sta2x11_vip.c | 1343 ++++ drivers/media/pci/sta2x11/sta2x11_vip.h | 40 + drivers/media/pci/ttpci/Kconfig | 154 + drivers/media/pci/ttpci/Makefile | 21 + drivers/media/pci/ttpci/av7110.c | 2941 +++++++ drivers/media/pci/ttpci/av7110.h | 317 + drivers/media/pci/ttpci/av7110_av.c | 1634 ++++ drivers/media/pci/ttpci/av7110_av.h | 30 + drivers/media/pci/ttpci/av7110_ca.c | 397 + drivers/media/pci/ttpci/av7110_ca.h | 14 + drivers/media/pci/ttpci/av7110_hw.c | 1223 +++ drivers/media/pci/ttpci/av7110_hw.h | 495 ++ drivers/media/pci/ttpci/av7110_ipack.c | 403 + drivers/media/pci/ttpci/av7110_ipack.h | 12 + drivers/media/pci/ttpci/av7110_ir.c | 415 + drivers/media/pci/ttpci/av7110_v4l.c | 966 +++ drivers/media/pci/ttpci/budget-av.c | 1640 ++++ drivers/media/pci/ttpci/budget-ci.c | 1591 ++++ drivers/media/pci/ttpci/budget-core.c | 602 ++ drivers/media/pci/ttpci/budget-patch.c | 680 ++ drivers/media/pci/ttpci/budget.c | 883 +++ drivers/media/pci/ttpci/budget.h | 124 + drivers/media/pci/ttpci/ttpci-eeprom.c | 176 + drivers/media/pci/ttpci/ttpci-eeprom.h | 34 + drivers/media/pci/zoran/Kconfig | 74 + drivers/media/pci/zoran/Makefile | 6 + drivers/media/pci/zoran/videocodec.c | 407 + drivers/media/pci/zoran/videocodec.h | 353 + drivers/media/pci/zoran/zoran.h | 403 + drivers/media/pci/zoran/zoran_card.c | 1523 ++++ drivers/media/pci/zoran/zoran_card.h | 54 + drivers/media/pci/zoran/zoran_device.c | 1640 ++++ drivers/media/pci/zoran/zoran_device.h | 95 + drivers/media/pci/zoran/zoran_driver.c | 3091 ++++++++ drivers/media/pci/zoran/zoran_procfs.c | 225 + drivers/media/pci/zoran/zoran_procfs.h | 36 + drivers/media/pci/zoran/zr36016.c | 524 ++ drivers/media/pci/zoran/zr36016.h | 111 + drivers/media/pci/zoran/zr36050.c | 900 +++ drivers/media/pci/zoran/zr36050.h | 184 + drivers/media/pci/zoran/zr36057.h | 168 + drivers/media/pci/zoran/zr36060.c | 1010 +++ drivers/media/pci/zoran/zr36060.h | 220 + drivers/media/platform/Kconfig | 243 + drivers/media/platform/Makefile | 53 + drivers/media/platform/arv.c | 885 +++ drivers/media/platform/blackfin/Kconfig | 15 + drivers/media/platform/blackfin/Makefile | 2 + drivers/media/platform/blackfin/bfin_capture.c | 1179 +++ drivers/media/platform/blackfin/ppi.c | 333 + drivers/media/platform/coda.c | 2110 +++++ drivers/media/platform/coda.h | 238 + drivers/media/platform/davinci/Kconfig | 78 + drivers/media/platform/davinci/Makefile | 15 + drivers/media/platform/davinci/ccdc_hw_device.h | 110 + drivers/media/platform/davinci/dm355_ccdc.c | 1039 +++ drivers/media/platform/davinci/dm355_ccdc_regs.h | 310 + drivers/media/platform/davinci/dm644x_ccdc.c | 1044 +++ drivers/media/platform/davinci/dm644x_ccdc_regs.h | 153 + drivers/media/platform/davinci/isif.c | 1145 +++ drivers/media/platform/davinci/isif_regs.h | 269 + drivers/media/platform/davinci/vpbe.c | 872 +++ drivers/media/platform/davinci/vpbe_display.c | 1904 +++++ drivers/media/platform/davinci/vpbe_osd.c | 1622 ++++ drivers/media/platform/davinci/vpbe_osd_regs.h | 364 + drivers/media/platform/davinci/vpbe_venc.c | 758 ++ drivers/media/platform/davinci/vpbe_venc_regs.h | 177 + drivers/media/platform/davinci/vpfe_capture.c | 2043 +++++ drivers/media/platform/davinci/vpif.c | 508 ++ drivers/media/platform/davinci/vpif.h | 688 ++ drivers/media/platform/davinci/vpif_capture.c | 2382 ++++++ drivers/media/platform/davinci/vpif_capture.h | 162 + drivers/media/platform/davinci/vpif_display.c | 2044 +++++ drivers/media/platform/davinci/vpif_display.h | 165 + drivers/media/platform/davinci/vpss.c | 569 ++ drivers/media/platform/exynos-gsc/Makefile | 3 + drivers/media/platform/exynos-gsc/gsc-core.c | 1263 +++ drivers/media/platform/exynos-gsc/gsc-core.h | 533 ++ drivers/media/platform/exynos-gsc/gsc-m2m.c | 790 ++ drivers/media/platform/exynos-gsc/gsc-regs.c | 430 ++ drivers/media/platform/exynos-gsc/gsc-regs.h | 172 + drivers/media/platform/exynos4-is/Kconfig | 61 + drivers/media/platform/exynos4-is/Makefile | 10 + drivers/media/platform/exynos4-is/fimc-capture.c | 1893 +++++ drivers/media/platform/exynos4-is/fimc-core.c | 1311 ++++ drivers/media/platform/exynos4-is/fimc-core.h | 731 ++ .../media/platform/exynos4-is/fimc-is-command.h | 137 + drivers/media/platform/exynos4-is/fimc-is-errno.c | 272 + drivers/media/platform/exynos4-is/fimc-is-errno.h | 248 + drivers/media/platform/exynos4-is/fimc-is-i2c.c | 126 + drivers/media/platform/exynos4-is/fimc-is-i2c.h | 15 + drivers/media/platform/exynos4-is/fimc-is-param.c | 900 +++ drivers/media/platform/exynos4-is/fimc-is-param.h | 1020 +++ drivers/media/platform/exynos4-is/fimc-is-regs.c | 243 + drivers/media/platform/exynos4-is/fimc-is-regs.h | 164 + drivers/media/platform/exynos4-is/fimc-is-sensor.c | 305 + drivers/media/platform/exynos4-is/fimc-is-sensor.h | 89 + drivers/media/platform/exynos4-is/fimc-is.c | 995 +++ drivers/media/platform/exynos4-is/fimc-is.h | 343 + drivers/media/platform/exynos4-is/fimc-isp.c | 703 ++ drivers/media/platform/exynos4-is/fimc-isp.h | 181 + drivers/media/platform/exynos4-is/fimc-lite-reg.c | 302 + drivers/media/platform/exynos4-is/fimc-lite-reg.h | 150 + drivers/media/platform/exynos4-is/fimc-lite.c | 1660 ++++ drivers/media/platform/exynos4-is/fimc-lite.h | 214 + drivers/media/platform/exynos4-is/fimc-m2m.c | 865 +++ drivers/media/platform/exynos4-is/fimc-reg.c | 841 ++ drivers/media/platform/exynos4-is/fimc-reg.h | 338 + drivers/media/platform/exynos4-is/media-dev.c | 1511 ++++ drivers/media/platform/exynos4-is/media-dev.h | 152 + drivers/media/platform/exynos4-is/mipi-csis.c | 1019 +++ drivers/media/platform/exynos4-is/mipi-csis.h | 26 + drivers/media/platform/fsl-viu.c | 1688 ++++ drivers/media/platform/indycam.c | 390 + drivers/media/platform/indycam.h | 93 + drivers/media/platform/m2m-deinterlace.c | 1109 +++ drivers/media/platform/marvell-ccic/Kconfig | 23 + drivers/media/platform/marvell-ccic/Makefile | 6 + drivers/media/platform/marvell-ccic/cafe-driver.c | 654 ++ drivers/media/platform/marvell-ccic/mcam-core.c | 1838 +++++ drivers/media/platform/marvell-ccic/mcam-core.h | 333 + drivers/media/platform/marvell-ccic/mmp-driver.c | 380 + drivers/media/platform/mem2mem_testdev.c | 1136 +++ drivers/media/platform/mx2_emmaprp.c | 1021 +++ drivers/media/platform/omap/Kconfig | 14 + drivers/media/platform/omap/Makefile | 8 + drivers/media/platform/omap/omap_vout.c | 2294 ++++++ drivers/media/platform/omap/omap_vout_vrfb.c | 392 + drivers/media/platform/omap/omap_vout_vrfb.h | 40 + drivers/media/platform/omap/omap_voutdef.h | 225 + drivers/media/platform/omap/omap_voutlib.c | 357 + drivers/media/platform/omap/omap_voutlib.h | 39 + drivers/media/platform/omap24xxcam-dma.c | 601 ++ drivers/media/platform/omap24xxcam.c | 1881 +++++ drivers/media/platform/omap24xxcam.h | 593 ++ drivers/media/platform/omap3isp/Makefile | 11 + drivers/media/platform/omap3isp/cfa_coef_table.h | 61 + drivers/media/platform/omap3isp/gamma_table.h | 90 + drivers/media/platform/omap3isp/isp.c | 2332 ++++++ drivers/media/platform/omap3isp/isp.h | 359 + drivers/media/platform/omap3isp/ispccdc.c | 2584 +++++++ drivers/media/platform/omap3isp/ispccdc.h | 172 + drivers/media/platform/omap3isp/ispccp2.c | 1167 +++ drivers/media/platform/omap3isp/ispccp2.h | 98 + drivers/media/platform/omap3isp/ispcsi2.c | 1328 ++++ drivers/media/platform/omap3isp/ispcsi2.h | 165 + drivers/media/platform/omap3isp/ispcsiphy.c | 353 + drivers/media/platform/omap3isp/ispcsiphy.h | 53 + drivers/media/platform/omap3isp/isph3a.h | 117 + drivers/media/platform/omap3isp/isph3a_aewb.c | 352 + drivers/media/platform/omap3isp/isph3a_af.c | 407 + drivers/media/platform/omap3isp/isphist.c | 521 ++ drivers/media/platform/omap3isp/isphist.h | 40 + drivers/media/platform/omap3isp/isppreview.c | 2374 ++++++ drivers/media/platform/omap3isp/isppreview.h | 174 + drivers/media/platform/omap3isp/ispqueue.c | 1159 +++ drivers/media/platform/omap3isp/ispqueue.h | 187 + drivers/media/platform/omap3isp/ispreg.h | 1531 ++++ drivers/media/platform/omap3isp/ispresizer.c | 1778 +++++ drivers/media/platform/omap3isp/ispresizer.h | 146 + drivers/media/platform/omap3isp/ispstat.c | 1104 +++ drivers/media/platform/omap3isp/ispstat.h | 169 + drivers/media/platform/omap3isp/ispvideo.c | 1403 ++++ drivers/media/platform/omap3isp/ispvideo.h | 216 + .../media/platform/omap3isp/luma_enhance_table.h | 42 + .../media/platform/omap3isp/noise_filter_table.h | 30 + drivers/media/platform/s3c-camif/Makefile | 5 + drivers/media/platform/s3c-camif/camif-capture.c | 1680 ++++ drivers/media/platform/s3c-camif/camif-core.c | 661 ++ drivers/media/platform/s3c-camif/camif-core.h | 393 + drivers/media/platform/s3c-camif/camif-regs.c | 606 ++ drivers/media/platform/s3c-camif/camif-regs.h | 269 + drivers/media/platform/s5p-g2d/Makefile | 3 + drivers/media/platform/s5p-g2d/g2d-hw.c | 117 + drivers/media/platform/s5p-g2d/g2d-regs.h | 122 + drivers/media/platform/s5p-g2d/g2d.c | 904 +++ drivers/media/platform/s5p-g2d/g2d.h | 97 + drivers/media/platform/s5p-jpeg/Makefile | 2 + drivers/media/platform/s5p-jpeg/jpeg-core.c | 1531 ++++ drivers/media/platform/s5p-jpeg/jpeg-core.h | 150 + drivers/media/platform/s5p-jpeg/jpeg-hw.h | 357 + drivers/media/platform/s5p-jpeg/jpeg-regs.h | 170 + drivers/media/platform/s5p-mfc/Makefile | 6 + drivers/media/platform/s5p-mfc/regs-mfc-v6.h | 408 + drivers/media/platform/s5p-mfc/regs-mfc.h | 459 ++ drivers/media/platform/s5p-mfc/s5p_mfc.c | 1441 ++++ drivers/media/platform/s5p-mfc/s5p_mfc_cmd.c | 29 + drivers/media/platform/s5p-mfc/s5p_mfc_cmd.h | 35 + drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c | 166 + drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.h | 20 + drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c | 156 + drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.h | 20 + drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 679 ++ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 404 + drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h | 31 + drivers/media/platform/s5p-mfc/s5p_mfc_debug.h | 48 + drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 1217 +++ drivers/media/platform/s5p-mfc/s5p_mfc_dec.h | 24 + drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 1973 +++++ drivers/media/platform/s5p-mfc/s5p_mfc_enc.h | 24 + drivers/media/platform/s5p-mfc/s5p_mfc_intr.c | 91 + drivers/media/platform/s5p-mfc/s5p_mfc_intr.h | 26 + drivers/media/platform/s5p-mfc/s5p_mfc_opr.c | 61 + drivers/media/platform/s5p-mfc/s5p_mfc_opr.h | 89 + drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 1743 +++++ drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.h | 85 + drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 1893 +++++ drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h | 50 + drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 117 + drivers/media/platform/s5p-mfc/s5p_mfc_pm.h | 24 + drivers/media/platform/s5p-tv/Kconfig | 85 + drivers/media/platform/s5p-tv/Makefile | 19 + drivers/media/platform/s5p-tv/hdmi_drv.c | 1026 +++ drivers/media/platform/s5p-tv/hdmiphy_drv.c | 318 + drivers/media/platform/s5p-tv/mixer.h | 366 + drivers/media/platform/s5p-tv/mixer_drv.c | 487 ++ drivers/media/platform/s5p-tv/mixer_grp_layer.c | 270 + drivers/media/platform/s5p-tv/mixer_reg.c | 553 ++ drivers/media/platform/s5p-tv/mixer_video.c | 1153 +++ drivers/media/platform/s5p-tv/mixer_vp_layer.c | 241 + drivers/media/platform/s5p-tv/regs-hdmi.h | 146 + drivers/media/platform/s5p-tv/regs-mixer.h | 122 + drivers/media/platform/s5p-tv/regs-sdo.h | 63 + drivers/media/platform/s5p-tv/regs-vp.h | 88 + drivers/media/platform/s5p-tv/sdo_drv.c | 451 ++ drivers/media/platform/s5p-tv/sii9234_drv.c | 406 + drivers/media/platform/sh_veu.c | 1253 +++ drivers/media/platform/sh_vou.c | 1494 ++++ drivers/media/platform/soc_camera/Kconfig | 87 + drivers/media/platform/soc_camera/Makefile | 14 + drivers/media/platform/soc_camera/atmel-isi.c | 1089 +++ drivers/media/platform/soc_camera/mx1_camera.c | 868 +++ drivers/media/platform/soc_camera/mx2_camera.c | 1630 ++++ drivers/media/platform/soc_camera/mx3_camera.c | 1292 ++++ drivers/media/platform/soc_camera/omap1_camera.c | 1724 +++++ drivers/media/platform/soc_camera/pxa_camera.c | 1819 +++++ .../platform/soc_camera/sh_mobile_ceu_camera.c | 2318 ++++++ drivers/media/platform/soc_camera/sh_mobile_csi2.c | 382 + drivers/media/platform/soc_camera/soc_camera.c | 1613 ++++ .../platform/soc_camera/soc_camera_platform.c | 204 + drivers/media/platform/soc_camera/soc_mediabus.c | 529 ++ drivers/media/platform/timblogiw.c | 880 +++ drivers/media/platform/via-camera.c | 1482 ++++ drivers/media/platform/via-camera.h | 93 + drivers/media/platform/vino.c | 4352 +++++++++++ drivers/media/platform/vino.h | 138 + drivers/media/platform/vivi.c | 1537 ++++ drivers/media/radio/Kconfig | 498 ++ drivers/media/radio/Makefile | 38 + drivers/media/radio/dsbr100.c | 434 ++ drivers/media/radio/lm7000.h | 43 + drivers/media/radio/radio-aimslab.c | 194 + drivers/media/radio/radio-aztech.c | 186 + drivers/media/radio/radio-cadet.c | 677 ++ drivers/media/radio/radio-gemtek.c | 343 + drivers/media/radio/radio-isa.c | 394 + drivers/media/radio/radio-isa.h | 114 + drivers/media/radio/radio-keene.c | 434 ++ drivers/media/radio/radio-ma901.c | 471 ++ drivers/media/radio/radio-maxiradio.c | 214 + drivers/media/radio/radio-miropcm20.c | 245 + drivers/media/radio/radio-mr800.c | 614 ++ drivers/media/radio/radio-rtrack2.c | 141 + drivers/media/radio/radio-sf16fmi.c | 402 + drivers/media/radio/radio-sf16fmr2.c | 347 + drivers/media/radio/radio-shark.c | 423 + drivers/media/radio/radio-shark2.c | 389 + drivers/media/radio/radio-si4713.c | 246 + drivers/media/radio/radio-si476x.c | 1599 ++++ drivers/media/radio/radio-tea5764.c | 595 ++ drivers/media/radio/radio-tea5777.c | 603 ++ drivers/media/radio/radio-tea5777.h | 90 + drivers/media/radio/radio-terratec.c | 170 + drivers/media/radio/radio-timb.c | 231 + drivers/media/radio/radio-trust.c | 243 + drivers/media/radio/radio-typhoon.c | 180 + drivers/media/radio/radio-wl1273.c | 2160 ++++++ drivers/media/radio/radio-zoltrix.c | 248 + drivers/media/radio/saa7706h.c | 452 ++ drivers/media/radio/si470x/Kconfig | 37 + drivers/media/radio/si470x/Makefile | 9 + drivers/media/radio/si470x/radio-si470x-common.c | 759 ++ drivers/media/radio/si470x/radio-si470x-i2c.c | 526 ++ drivers/media/radio/si470x/radio-si470x-usb.c | 849 ++ drivers/media/radio/si470x/radio-si470x.h | 226 + drivers/media/radio/si4713-i2c.c | 1532 ++++ drivers/media/radio/si4713-i2c.h | 238 + drivers/media/radio/tef6862.c | 222 + drivers/media/radio/wl128x/Kconfig | 17 + drivers/media/radio/wl128x/Makefile | 6 + drivers/media/radio/wl128x/fmdrv.h | 239 + drivers/media/radio/wl128x/fmdrv_common.c | 1684 ++++ drivers/media/radio/wl128x/fmdrv_common.h | 402 + drivers/media/radio/wl128x/fmdrv_rx.c | 849 ++ drivers/media/radio/wl128x/fmdrv_rx.h | 59 + drivers/media/radio/wl128x/fmdrv_tx.c | 426 + drivers/media/radio/wl128x/fmdrv_tx.h | 37 + drivers/media/radio/wl128x/fmdrv_v4l2.c | 615 ++ drivers/media/radio/wl128x/fmdrv_v4l2.h | 33 + drivers/media/rc/Kconfig | 324 + drivers/media/rc/Makefile | 32 + drivers/media/rc/ati_remote.c | 1007 +++ drivers/media/rc/ene_ir.c | 1216 +++ drivers/media/rc/ene_ir.h | 250 + drivers/media/rc/fintek-cir.c | 709 ++ drivers/media/rc/fintek-cir.h | 245 + drivers/media/rc/gpio-ir-recv.c | 254 + drivers/media/rc/iguanair.c | 627 ++ drivers/media/rc/imon.c | 2483 ++++++ drivers/media/rc/ir-jvc-decoder.c | 199 + drivers/media/rc/ir-lirc-codec.c | 436 ++ drivers/media/rc/ir-mce_kbd-decoder.c | 449 ++ drivers/media/rc/ir-nec-decoder.c | 227 + drivers/media/rc/ir-raw.c | 361 + drivers/media/rc/ir-rc5-decoder.c | 198 + drivers/media/rc/ir-rc5-sz-decoder.c | 154 + drivers/media/rc/ir-rc6-decoder.c | 300 + drivers/media/rc/ir-rx51.c | 486 ++ drivers/media/rc/ir-sanyo-decoder.c | 205 + drivers/media/rc/ir-sony-decoder.c | 195 + drivers/media/rc/ite-cir.c | 1729 +++++ drivers/media/rc/ite-cir.h | 484 ++ drivers/media/rc/keymaps/Kconfig | 15 + drivers/media/rc/keymaps/Makefile | 100 + drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c | 90 + drivers/media/rc/keymaps/rc-alink-dtu-m.c | 69 + drivers/media/rc/keymaps/rc-anysee.c | 94 + drivers/media/rc/keymaps/rc-apac-viewcomp.c | 81 + drivers/media/rc/keymaps/rc-asus-pc39.c | 92 + drivers/media/rc/keymaps/rc-asus-ps3-100.c | 91 + drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c | 70 + drivers/media/rc/keymaps/rc-ati-x10.c | 104 + drivers/media/rc/keymaps/rc-avermedia-a16d.c | 76 + drivers/media/rc/keymaps/rc-avermedia-cardbus.c | 98 + drivers/media/rc/keymaps/rc-avermedia-dvbt.c | 79 + drivers/media/rc/keymaps/rc-avermedia-m135a.c | 148 + .../media/rc/keymaps/rc-avermedia-m733a-rm-k6.c | 96 + drivers/media/rc/keymaps/rc-avermedia-rm-ks.c | 80 + drivers/media/rc/keymaps/rc-avermedia.c | 87 + drivers/media/rc/keymaps/rc-avertv-303.c | 86 + drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c | 103 + drivers/media/rc/keymaps/rc-behold-columbus.c | 109 + drivers/media/rc/keymaps/rc-behold.c | 142 + drivers/media/rc/keymaps/rc-budget-ci-old.c | 94 + drivers/media/rc/keymaps/rc-cinergy-1400.c | 85 + drivers/media/rc/keymaps/rc-cinergy.c | 79 + drivers/media/rc/keymaps/rc-dib0700-nec.c | 125 + drivers/media/rc/keymaps/rc-dib0700-rc5.c | 236 + drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c | 99 + drivers/media/rc/keymaps/rc-digittrade.c | 83 + drivers/media/rc/keymaps/rc-dm1105-nec.c | 77 + drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c | 79 + drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c | 98 + drivers/media/rc/keymaps/rc-em-terratec.c | 70 + drivers/media/rc/keymaps/rc-encore-enltv-fm53.c | 82 + drivers/media/rc/keymaps/rc-encore-enltv.c | 113 + drivers/media/rc/keymaps/rc-encore-enltv2.c | 91 + drivers/media/rc/keymaps/rc-evga-indtube.c | 62 + drivers/media/rc/keymaps/rc-eztv.c | 97 + drivers/media/rc/keymaps/rc-flydvb.c | 78 + drivers/media/rc/keymaps/rc-flyvideo.c | 71 + drivers/media/rc/keymaps/rc-fusionhdtv-mce.c | 99 + drivers/media/rc/keymaps/rc-gadmei-rm008z.c | 82 + drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c | 85 + drivers/media/rc/keymaps/rc-gotview7135.c | 80 + drivers/media/rc/keymaps/rc-hauppauge.c | 293 + drivers/media/rc/keymaps/rc-imon-mce.c | 143 + drivers/media/rc/keymaps/rc-imon-pad.c | 157 + drivers/media/rc/keymaps/rc-iodata-bctv7e.c | 89 + drivers/media/rc/keymaps/rc-it913x-v1.c | 95 + drivers/media/rc/keymaps/rc-it913x-v2.c | 94 + drivers/media/rc/keymaps/rc-kaiomy.c | 88 + drivers/media/rc/keymaps/rc-kworld-315u.c | 84 + drivers/media/rc/keymaps/rc-kworld-pc150u.c | 102 + .../media/rc/keymaps/rc-kworld-plus-tv-analog.c | 100 + drivers/media/rc/keymaps/rc-leadtek-y04g0051.c | 100 + drivers/media/rc/keymaps/rc-lirc.c | 42 + drivers/media/rc/keymaps/rc-lme2510.c | 111 + drivers/media/rc/keymaps/rc-manli.c | 135 + .../media/rc/keymaps/rc-medion-x10-digitainer.c | 123 + drivers/media/rc/keymaps/rc-medion-x10-or2x.c | 108 + drivers/media/rc/keymaps/rc-medion-x10.c | 117 + drivers/media/rc/keymaps/rc-msi-digivox-ii.c | 68 + drivers/media/rc/keymaps/rc-msi-digivox-iii.c | 86 + drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c | 124 + drivers/media/rc/keymaps/rc-msi-tvanywhere.c | 70 + drivers/media/rc/keymaps/rc-nebula.c | 97 + .../media/rc/keymaps/rc-nec-terratec-cinergy-xs.c | 158 + drivers/media/rc/keymaps/rc-norwood.c | 86 + drivers/media/rc/keymaps/rc-npgtech.c | 81 + drivers/media/rc/keymaps/rc-pctv-sedna.c | 81 + drivers/media/rc/keymaps/rc-pinnacle-color.c | 95 + drivers/media/rc/keymaps/rc-pinnacle-grey.c | 90 + drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c | 71 + drivers/media/rc/keymaps/rc-pixelview-002t.c | 78 + drivers/media/rc/keymaps/rc-pixelview-mk12.c | 84 + drivers/media/rc/keymaps/rc-pixelview-new.c | 84 + drivers/media/rc/keymaps/rc-pixelview.c | 83 + .../media/rc/keymaps/rc-powercolor-real-angel.c | 82 + drivers/media/rc/keymaps/rc-proteus-2309.c | 70 + drivers/media/rc/keymaps/rc-purpletv.c | 82 + drivers/media/rc/keymaps/rc-pv951.c | 79 + drivers/media/rc/keymaps/rc-rc6-mce.c | 119 + .../media/rc/keymaps/rc-real-audio-220-32-keys.c | 79 + drivers/media/rc/keymaps/rc-reddo.c | 86 + drivers/media/rc/keymaps/rc-snapstream-firefly.c | 107 + drivers/media/rc/keymaps/rc-streamzap.c | 83 + drivers/media/rc/keymaps/rc-tbs-nec.c | 76 + drivers/media/rc/keymaps/rc-technisat-usb2.c | 94 + drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c | 93 + drivers/media/rc/keymaps/rc-terratec-slim-2.c | 73 + drivers/media/rc/keymaps/rc-terratec-slim.c | 80 + drivers/media/rc/keymaps/rc-tevii-nec.c | 89 + drivers/media/rc/keymaps/rc-tivo.c | 99 + .../media/rc/keymaps/rc-total-media-in-hand-02.c | 86 + drivers/media/rc/keymaps/rc-total-media-in-hand.c | 86 + drivers/media/rc/keymaps/rc-trekstor.c | 81 + drivers/media/rc/keymaps/rc-tt-1500.c | 83 + drivers/media/rc/keymaps/rc-twinhan1027.c | 88 + drivers/media/rc/keymaps/rc-videomate-m1f.c | 93 + drivers/media/rc/keymaps/rc-videomate-s350.c | 86 + drivers/media/rc/keymaps/rc-videomate-tv-pvr.c | 88 + drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c | 83 + drivers/media/rc/keymaps/rc-winfast.c | 103 + drivers/media/rc/lirc_dev.c | 824 ++ drivers/media/rc/mceusb.c | 1452 ++++ drivers/media/rc/nuvoton-cir.c | 1242 +++ drivers/media/rc/nuvoton-cir.h | 418 + drivers/media/rc/rc-core-priv.h | 222 + drivers/media/rc/rc-loopback.c | 246 + drivers/media/rc/rc-main.c | 1206 +++ drivers/media/rc/redrat3.c | 1099 +++ drivers/media/rc/streamzap.c | 533 ++ drivers/media/rc/ttusbir.c | 448 ++ drivers/media/rc/winbond-cir.c | 1254 +++ drivers/media/sprd_dcam/Kconfig | 48 + drivers/media/sprd_dcam/Makefile | 26 + drivers/media/sprd_dcam/common/Makefile.inc | 15 + drivers/media/sprd_dcam/common/dcam_img.c | 3779 +++++++++ drivers/media/sprd_dcam/common/flash_test.c | 115 + drivers/media/sprd_dcam/common/flash_test.h | 38 + drivers/media/sprd_dcam/common/gen_scale_coef.c | 699 ++ drivers/media/sprd_dcam/common/gen_scale_coef.h | 34 + drivers/media/sprd_dcam/common/parse_hwinfo.c | 353 + drivers/media/sprd_dcam/common/parse_hwinfo.h | 72 + .../media/sprd_dcam/common/parse_hwinfo_tshark2.h | 47 + drivers/media/sprd_dcam/common/sin_cos.c | 270 + drivers/media/sprd_dcam/common/sin_cos.h | 74 + drivers/media/sprd_dcam/flash/Makefile | 82 + drivers/media/sprd_dcam/flash/flash.h | 22 + drivers/media/sprd_dcam/flash/flash_common.c | 44 + drivers/media/sprd_dcam/flash/flash_gpio.c | 56 + drivers/media/sprd_dcam/flash/flash_kanas_w.c | 66 + .../sprd_dcam/flash/flash_parallel_connect_bg.c | 103 + drivers/media/sprd_dcam/flash/flash_sgm3140.c | 64 + drivers/media/sprd_dcam/flash/flash_sm5701.c | 48 + drivers/media/sprd_dcam/flash/flash_sprd_sm5701.c | 48 + drivers/media/sprd_dcam/flash/flash_vivalto.c | 53 + drivers/media/sprd_dcam/pike/dcam_drv.c | 4549 +++++++++++ drivers/media/sprd_dcam/pike/dcam_drv.h | 448 ++ drivers/media/sprd_dcam/pike/dcam_reg.h | 192 + drivers/media/sprd_dcam/sc8830/dcam_drv.h | 420 + drivers/media/sprd_dcam/sharkl/dcam_drv.c | 4580 +++++++++++ drivers/media/sprd_dcam/sharkl/dcam_drv.h | 445 ++ drivers/media/sprd_dcam/sharkl/dcam_reg.h | 205 + drivers/media/sprd_dcam/tshark/dcam_drv.c | 4693 ++++++++++++ drivers/media/sprd_dcam/tshark/dcam_drv.h | 449 ++ drivers/media/sprd_dcam/tshark/dcam_reg.h | 197 + drivers/media/sprd_dcam/tshark2/dcam_drv.c | 4913 ++++++++++++ drivers/media/sprd_dcam/tshark2/dcam_drv.h | 454 ++ drivers/media/sprd_dcam/tshark2/dcam_reg.h | 216 + drivers/media/sprd_gsp/Kconfig | 6 + drivers/media/sprd_gsp/Makefile | 22 + drivers/media/sprd_gsp/gsp_config_if.c | 293 + drivers/media/sprd_gsp/gsp_config_if.h | 484 ++ drivers/media/sprd_gsp/gsp_debug.h | 336 + drivers/media/sprd_gsp/gsp_drv.c | 1253 +++ drivers/media/sprd_gsp/gsp_drv_common.h | 103 + drivers/media/sprd_gsp/scaler_coef_cal.c | 811 ++ drivers/media/sprd_gsp/scaler_coef_cal.h | 72 + drivers/media/sprd_gsp/sin_cos.c | 153 + drivers/media/sprd_gsp/sin_cos.h | 24 + drivers/media/sprd_isp/Kconfig | 10 + drivers/media/sprd_isp/Makefile | 186 + drivers/media/sprd_isp/Shark_reg_isp.h | 70 + drivers/media/sprd_isp/compat_isp_drv.c | 356 + drivers/media/sprd_isp/compat_isp_drv.h | 23 + drivers/media/sprd_isp/compat_isp_drv_kernel.c | 327 + drivers/media/sprd_isp/compat_isp_drv_kernel.h | 26 + drivers/media/sprd_isp/isp1.0/Shark_reg_isp.h | 70 + drivers/media/sprd_isp/isp1.0/Tiger_reg_isp.h | 91 + .../media/sprd_isp/isp1.0/compat_isp_drv_kernel.c | 327 + .../media/sprd_isp/isp1.0/compat_isp_drv_kernel.h | 26 + drivers/media/sprd_isp/isp1.0/isp_drv_kernel.c | 1494 ++++ drivers/media/sprd_isp/isp1.0/isp_drv_null.c | 305 + drivers/media/sprd_isp/isp2.0/pike/inc/isp_block.h | 72 + drivers/media/sprd_isp/isp2.0/pike/inc/isp_drv.h | 94 + drivers/media/sprd_isp/isp2.0/pike/inc/isp_reg.h | 801 ++ .../media/sprd_isp/isp2.0/pike/src/isp_cfg_param.c | 133 + .../media/sprd_isp/isp2.0/pike/src/isp_k_1d_lsc.c | 146 + .../media/sprd_isp/isp2.0/pike/src/isp_k_2d_lsc.c | 537 ++ drivers/media/sprd_isp/isp2.0/pike/src/isp_k_aca.c | 78 + .../sprd_isp/isp2.0/pike/src/isp_k_anti_flicker.c | 155 + .../media/sprd_isp/isp2.0/pike/src/isp_k_arbiter.c | 177 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_awb.c | 191 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_bdn.c | 121 + .../sprd_isp/isp2.0/pike/src/isp_k_binning4awb.c | 231 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_blc.c | 66 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_bpc.c | 101 + .../sprd_isp/isp2.0/pike/src/isp_k_brightness.c | 67 + .../sprd_isp/isp2.0/pike/src/isp_k_capability.c | 195 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_cce.c | 147 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_cdn.c | 109 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_cfa.c | 90 + .../media/sprd_isp/isp2.0/pike/src/isp_k_cmc10.c | 93 + .../media/sprd_isp/isp2.0/pike/src/isp_k_cmc8.c | 92 + .../media/sprd_isp/isp2.0/pike/src/isp_k_common.c | 411 + .../sprd_isp/isp2.0/pike/src/isp_k_contrast.c | 67 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_csa.c | 68 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_csc.c | 114 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_css.c | 112 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_ct.c | 92 + .../sprd_isp/isp2.0/pike/src/isp_k_dispatch.c | 143 + .../media/sprd_isp/isp2.0/pike/src/isp_k_edge.c | 128 + .../media/sprd_isp/isp2.0/pike/src/isp_k_emboss.c | 74 + .../media/sprd_isp/isp2.0/pike/src/isp_k_fetch.c | 127 + .../media/sprd_isp/isp2.0/pike/src/isp_k_gamma.c | 143 + .../media/sprd_isp/isp2.0/pike/src/isp_k_grgb.c | 70 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_hdr.c | 142 + .../media/sprd_isp/isp2.0/pike/src/isp_k_hist.c | 131 + .../media/sprd_isp/isp2.0/pike/src/isp_k_hist2.c | 95 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_hsv.c | 95 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_hua.c | 68 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_isr.c | 101 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_nlc.c | 83 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_nlm.c | 202 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_pgg.c | 67 + .../sprd_isp/isp2.0/pike/src/isp_k_post_cdn.c | 129 + .../media/sprd_isp/isp2.0/pike/src/isp_k_pre_cdn.c | 135 + .../sprd_isp/isp2.0/pike/src/isp_k_pre_cdn_rgb.c | 73 + .../sprd_isp/isp2.0/pike/src/isp_k_prefilter.c | 73 + .../media/sprd_isp/isp2.0/pike/src/isp_k_pstrz.c | 71 + drivers/media/sprd_isp/isp2.0/pike/src/isp_k_pwd.c | 123 + .../media/sprd_isp/isp2.0/pike/src/isp_k_raw_aem.c | 255 + .../media/sprd_isp/isp2.0/pike/src/isp_k_raw_afm.c | 497 ++ .../media/sprd_isp/isp2.0/pike/src/isp_k_rgb2y.c | 62 + .../media/sprd_isp/isp2.0/pike/src/isp_k_rgb_afm.c | 415 + .../sprd_isp/isp2.0/pike/src/isp_k_rgb_gain.c | 69 + .../sprd_isp/isp2.0/pike/src/isp_k_rgb_gain2.c | 67 + .../media/sprd_isp/isp2.0/pike/src/isp_k_store.c | 101 + .../sprd_isp/isp2.0/pike/src/isp_k_uv_prefilter.c | 68 + .../media/sprd_isp/isp2.0/pike/src/isp_k_y_delay.c | 63 + .../media/sprd_isp/isp2.0/pike/src/isp_k_y_gamma.c | 133 + .../media/sprd_isp/isp2.0/pike/src/isp_k_yiq_aem.c | 121 + .../media/sprd_isp/isp2.0/pike/src/isp_k_yiq_afm.c | 120 + .../media/sprd_isp/isp2.0/pike/src/isp_k_yuv_nlm.c | 135 + .../media/sprd_isp/isp2.0/tshark2/inc/isp_block.h | 67 + .../media/sprd_isp/isp2.0/tshark2/inc/isp_drv.h | 95 + .../media/sprd_isp/isp2.0/tshark2/inc/isp_reg.h | 676 ++ .../sprd_isp/isp2.0/tshark2/src/isp_cfg_param.c | 131 + .../sprd_isp/isp2.0/tshark2/src/isp_k_1d_lsc.c | 146 + .../sprd_isp/isp2.0/tshark2/src/isp_k_2d_lsc.c | 537 ++ .../media/sprd_isp/isp2.0/tshark2/src/isp_k_aca.c | 78 + .../isp2.0/tshark2/src/isp_k_anti_flicker.c | 150 + .../sprd_isp/isp2.0/tshark2/src/isp_k_arbiter.c | 177 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_awb.c | 192 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_bdn.c | 121 + .../isp2.0/tshark2/src/isp_k_binning4awb.c | 249 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_blc.c | 66 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_bpc.c | 101 + .../sprd_isp/isp2.0/tshark2/src/isp_k_brightness.c | 67 + .../sprd_isp/isp2.0/tshark2/src/isp_k_capability.c | 202 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_cce.c | 147 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_cdn.c | 109 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_cfa.c | 90 + .../sprd_isp/isp2.0/tshark2/src/isp_k_cmc10.c | 93 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_cmc8.c | 92 + .../sprd_isp/isp2.0/tshark2/src/isp_k_common.c | 533 ++ .../sprd_isp/isp2.0/tshark2/src/isp_k_contrast.c | 67 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_csa.c | 68 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_csc.c | 114 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_css.c | 112 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_ct.c | 98 + .../sprd_isp/isp2.0/tshark2/src/isp_k_dispatch.c | 143 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_edge.c | 126 + .../sprd_isp/isp2.0/tshark2/src/isp_k_emboss.c | 74 + .../sprd_isp/isp2.0/tshark2/src/isp_k_fetch.c | 126 + .../sprd_isp/isp2.0/tshark2/src/isp_k_gamma.c | 131 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_grgb.c | 70 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_hist.c | 131 + .../sprd_isp/isp2.0/tshark2/src/isp_k_hist2.c | 94 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_hsv.c | 95 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_hua.c | 68 + .../sprd_isp/isp2.0/tshark2/src/isp_k_iircnr.c | 133 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_isr.c | 102 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_nlc.c | 83 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_nlm.c | 250 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_pgg.c | 67 + .../sprd_isp/isp2.0/tshark2/src/isp_k_post_cdn.c | 128 + .../sprd_isp/isp2.0/tshark2/src/isp_k_pre_cdn.c | 135 + .../isp2.0/tshark2/src/isp_k_pre_cdn_rgb.c | 73 + .../sprd_isp/isp2.0/tshark2/src/isp_k_prefilter.c | 73 + .../sprd_isp/isp2.0/tshark2/src/isp_k_pstrz.c | 71 + .../media/sprd_isp/isp2.0/tshark2/src/isp_k_pwd.c | 123 + .../sprd_isp/isp2.0/tshark2/src/isp_k_raw_aem.c | 255 + .../sprd_isp/isp2.0/tshark2/src/isp_k_raw_afm.c | 497 ++ .../sprd_isp/isp2.0/tshark2/src/isp_k_raw_sizer.c | 369 + .../sprd_isp/isp2.0/tshark2/src/isp_k_rgb_gain.c | 69 + .../sprd_isp/isp2.0/tshark2/src/isp_k_rgb_gain2.c | 69 + .../sprd_isp/isp2.0/tshark2/src/isp_k_store.c | 101 + .../sprd_isp/isp2.0/tshark2/src/isp_k_y_delay.c | 63 + .../sprd_isp/isp2.0/tshark2/src/isp_k_y_gamma.c | 121 + .../sprd_isp/isp2.0/tshark2/src/isp_k_yiq_aem.c | 256 + .../sprd_isp/isp2.0/tshark2/src/isp_k_yiq_afm.c | 193 + drivers/media/sprd_isp/isp_drv.c | 1800 +++++ drivers/media/sprd_rotation/Kconfig | 5 + drivers/media/sprd_rotation/Makefile | 7 + drivers/media/sprd_rotation/img_rot.c | 390 + drivers/media/sprd_rotation/img_rot.h | 17 + drivers/media/sprd_rotation/rot_drv.c | 339 + drivers/media/sprd_rotation/rot_drv.h | 62 + drivers/media/sprd_rotation/rot_reg.h | 71 + drivers/media/sprd_scale/Makefile | 12 + drivers/media/sprd_scale/common/compat_img_scale.c | 95 + drivers/media/sprd_scale/common/compat_img_scale.h | 25 + drivers/media/sprd_scale/common/gen_scale_coef.c | 644 ++ drivers/media/sprd_scale/common/gen_scale_coef.h | 34 + drivers/media/sprd_scale/common/img_scale.c | 388 + drivers/media/sprd_scale/common/img_scale.h | 43 + drivers/media/sprd_scale/common/sin_cos.c | 152 + drivers/media/sprd_scale/common/sin_cos.h | 24 + drivers/media/sprd_scale/scale_drv.c | 770 ++ drivers/media/sprd_scale/scale_drv.h | 69 + drivers/media/sprd_scale/scale_reg.h | 95 + drivers/media/sprd_sensor/Makefile | 14 + drivers/media/sprd_sensor/compat_sensor_drv_k.c | 213 + drivers/media/sprd_sensor/compat_sensor_drv_k.h | 25 + drivers/media/sprd_sensor/csi2/csi_access.c | 26 + drivers/media/sprd_sensor/csi2/csi_access.h | 17 + drivers/media/sprd_sensor/csi2/csi_api.c | 730 ++ drivers/media/sprd_sensor/csi2/csi_api.h | 79 + drivers/media/sprd_sensor/csi2/csi_api_null.c | 130 + drivers/media/sprd_sensor/csi2/csi_driver.c | 502 ++ drivers/media/sprd_sensor/csi2/csi_driver.h | 136 + drivers/media/sprd_sensor/csi2/csi_log.c | 177 + drivers/media/sprd_sensor/csi2/csi_log.h | 78 + drivers/media/sprd_sensor/csi2/csi_system.c | 84 + drivers/media/sprd_sensor/csi2/csi_system.h | 28 + drivers/media/sprd_sensor/csi2/csi_types.h | 15 + drivers/media/sprd_sensor/csi2/usc28c_init.c | 281 + drivers/media/sprd_sensor/otp/Makefile | 6 + drivers/media/sprd_sensor/otp/sensor_otp.c | 23 + drivers/media/sprd_sensor/otp/sensor_otp.h | 18 + .../sprd_sensor/otp/sensor_otp_coreprime3g_ve.c | 268 + drivers/media/sprd_sensor/power/Makefile | 22 + drivers/media/sprd_sensor/power/sensor_power.c | 40 + drivers/media/sprd_sensor/power/sensor_power.h | 21 + .../power/sensor_power_coreprime3g_ve.c | 159 + .../sprd_sensor/power/sensor_power_coreprimelite.c | 160 + .../power/sensor_power_grandprime3g_ve.c | 247 + .../power/sensor_power_grandprime_dtv.c | 247 + .../sprd_sensor/power/sensor_power_sharkl_t8.c | 247 + .../sprd_sensor/power/sensor_power_sharkls_z3lte.c | 160 + .../sprd_sensor/power/sensor_power_tshark2tabe.c | 143 + drivers/media/sprd_sensor/sensor_drv_k.c | 2005 +++++ drivers/media/sprd_sensor/sensor_drv_sprd.h | 93 + drivers/media/tuners/Kconfig | 238 + drivers/media/tuners/Makefile | 41 + drivers/media/tuners/e4000.c | 426 + drivers/media/tuners/e4000.h | 52 + drivers/media/tuners/e4000_priv.h | 147 + drivers/media/tuners/fc0011.c | 523 ++ drivers/media/tuners/fc0011.h | 41 + drivers/media/tuners/fc0012-priv.h | 32 + drivers/media/tuners/fc0012.c | 518 ++ drivers/media/tuners/fc0012.h | 66 + drivers/media/tuners/fc0013-priv.h | 44 + drivers/media/tuners/fc0013.c | 634 ++ drivers/media/tuners/fc0013.h | 57 + drivers/media/tuners/fc001x-common.h | 39 + drivers/media/tuners/fc2580.c | 555 ++ drivers/media/tuners/fc2580.h | 52 + drivers/media/tuners/fc2580_priv.h | 135 + drivers/media/tuners/max2165.c | 433 ++ drivers/media/tuners/max2165.h | 49 + drivers/media/tuners/max2165_priv.h | 60 + drivers/media/tuners/mc44s803.c | 379 + drivers/media/tuners/mc44s803.h | 47 + drivers/media/tuners/mc44s803_priv.h | 208 + drivers/media/tuners/mt2060.c | 403 + drivers/media/tuners/mt2060.h | 43 + drivers/media/tuners/mt2060_priv.h | 104 + drivers/media/tuners/mt2063.c | 2303 ++++++ drivers/media/tuners/mt2063.h | 28 + drivers/media/tuners/mt20xx.c | 670 ++ drivers/media/tuners/mt20xx.h | 37 + drivers/media/tuners/mt2131.c | 301 + drivers/media/tuners/mt2131.h | 54 + drivers/media/tuners/mt2131_priv.h | 48 + drivers/media/tuners/mt2266.c | 353 + drivers/media/tuners/mt2266.h | 37 + drivers/media/tuners/mxl5005s.c | 4120 ++++++++++ drivers/media/tuners/mxl5005s.h | 136 + drivers/media/tuners/mxl5007t.c | 928 +++ drivers/media/tuners/mxl5007t.h | 104 + drivers/media/tuners/qt1010.c | 456 ++ drivers/media/tuners/qt1010.h | 53 + drivers/media/tuners/qt1010_priv.h | 104 + drivers/media/tuners/r820t.c | 2355 ++++++ drivers/media/tuners/r820t.h | 59 + drivers/media/tuners/tda18212.c | 336 + drivers/media/tuners/tda18212.h | 52 + drivers/media/tuners/tda18218.c | 357 + drivers/media/tuners/tda18218.h | 45 + drivers/media/tuners/tda18218_priv.h | 97 + drivers/media/tuners/tda18271-common.c | 741 ++ drivers/media/tuners/tda18271-fe.c | 1365 ++++ drivers/media/tuners/tda18271-maps.c | 1315 ++++ drivers/media/tuners/tda18271-priv.h | 236 + drivers/media/tuners/tda18271.h | 139 + drivers/media/tuners/tda827x.c | 917 +++ drivers/media/tuners/tda827x.h | 69 + drivers/media/tuners/tda8290.c | 891 +++ drivers/media/tuners/tda8290.h | 66 + drivers/media/tuners/tda9887.c | 717 ++ drivers/media/tuners/tda9887.h | 38 + drivers/media/tuners/tea5761.c | 348 + drivers/media/tuners/tea5761.h | 47 + drivers/media/tuners/tea5767.c | 475 ++ drivers/media/tuners/tea5767.h | 66 + drivers/media/tuners/tua9001.c | 294 + drivers/media/tuners/tua9001.h | 66 + drivers/media/tuners/tua9001_priv.h | 34 + drivers/media/tuners/tuner-i2c.h | 182 + drivers/media/tuners/tuner-simple.c | 1158 +++ drivers/media/tuners/tuner-simple.h | 39 + drivers/media/tuners/tuner-types.c | 1952 +++++ drivers/media/tuners/tuner-xc2028-types.h | 141 + drivers/media/tuners/tuner-xc2028.c | 1514 ++++ drivers/media/tuners/tuner-xc2028.h | 72 + drivers/media/tuners/tuner_it913x.c | 447 ++ drivers/media/tuners/tuner_it913x.h | 45 + drivers/media/tuners/tuner_it913x_priv.h | 78 + drivers/media/tuners/xc4000.c | 1759 +++++ drivers/media/tuners/xc4000.h | 67 + drivers/media/tuners/xc5000.c | 1375 ++++ drivers/media/tuners/xc5000.h | 74 + drivers/media/usb/Kconfig | 56 + drivers/media/usb/Makefile | 22 + drivers/media/usb/au0828/Kconfig | 28 + drivers/media/usb/au0828/Makefile | 13 + drivers/media/usb/au0828/au0828-cards.c | 353 + drivers/media/usb/au0828/au0828-cards.h | 27 + drivers/media/usb/au0828/au0828-core.c | 318 + drivers/media/usb/au0828/au0828-dvb.c | 499 ++ drivers/media/usb/au0828/au0828-i2c.c | 402 + drivers/media/usb/au0828/au0828-reg.h | 66 + drivers/media/usb/au0828/au0828-vbi.c | 138 + drivers/media/usb/au0828/au0828-video.c | 2089 +++++ drivers/media/usb/au0828/au0828.h | 313 + drivers/media/usb/b2c2/Kconfig | 15 + drivers/media/usb/b2c2/Makefile | 5 + drivers/media/usb/b2c2/flexcop-usb.c | 587 ++ drivers/media/usb/b2c2/flexcop-usb.h | 111 + drivers/media/usb/cpia2/Kconfig | 9 + drivers/media/usb/cpia2/Makefile | 3 + drivers/media/usb/cpia2/cpia2.h | 487 ++ drivers/media/usb/cpia2/cpia2_core.c | 2417 ++++++ drivers/media/usb/cpia2/cpia2_registers.h | 476 ++ drivers/media/usb/cpia2/cpia2_usb.c | 955 +++ drivers/media/usb/cpia2/cpia2_v4l.c | 1269 +++ drivers/media/usb/cx231xx/Kconfig | 51 + drivers/media/usb/cx231xx/Makefile | 15 + drivers/media/usb/cx231xx/cx231xx-417.c | 1997 +++++ drivers/media/usb/cx231xx/cx231xx-audio.c | 776 ++ drivers/media/usb/cx231xx/cx231xx-avcore.c | 3087 ++++++++ drivers/media/usb/cx231xx/cx231xx-cards.c | 1438 ++++ drivers/media/usb/cx231xx/cx231xx-conf-reg.h | 495 ++ drivers/media/usb/cx231xx/cx231xx-core.c | 1736 +++++ drivers/media/usb/cx231xx/cx231xx-dif.h | 3178 ++++++++ drivers/media/usb/cx231xx/cx231xx-dvb.c | 796 ++ drivers/media/usb/cx231xx/cx231xx-i2c.c | 532 ++ drivers/media/usb/cx231xx/cx231xx-input.c | 119 + drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c | 795 ++ drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h | 226 + drivers/media/usb/cx231xx/cx231xx-reg.h | 1564 ++++ drivers/media/usb/cx231xx/cx231xx-vbi.c | 707 ++ drivers/media/usb/cx231xx/cx231xx-vbi.h | 65 + drivers/media/usb/cx231xx/cx231xx-video.c | 2395 ++++++ drivers/media/usb/cx231xx/cx231xx.h | 1008 +++ drivers/media/usb/dvb-usb-v2/Kconfig | 149 + drivers/media/usb/dvb-usb-v2/Makefile | 46 + drivers/media/usb/dvb-usb-v2/af9015.c | 1500 ++++ drivers/media/usb/dvb-usb-v2/af9015.h | 153 + drivers/media/usb/dvb-usb-v2/af9035.c | 1545 ++++ drivers/media/usb/dvb-usb-v2/af9035.h | 135 + drivers/media/usb/dvb-usb-v2/anysee.c | 1328 ++++ drivers/media/usb/dvb-usb-v2/anysee.h | 327 + drivers/media/usb/dvb-usb-v2/au6610.c | 213 + drivers/media/usb/dvb-usb-v2/au6610.h | 32 + drivers/media/usb/dvb-usb-v2/az6007.c | 923 +++ drivers/media/usb/dvb-usb-v2/ce6230.c | 292 + drivers/media/usb/dvb-usb-v2/ce6230.h | 50 + drivers/media/usb/dvb-usb-v2/dvb_usb.h | 411 + drivers/media/usb/dvb-usb-v2/dvb_usb_common.h | 35 + drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 1098 +++ drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c | 104 + drivers/media/usb/dvb-usb-v2/ec168.c | 385 + drivers/media/usb/dvb-usb-v2/ec168.h | 53 + drivers/media/usb/dvb-usb-v2/gl861.c | 177 + drivers/media/usb/dvb-usb-v2/gl861.h | 12 + drivers/media/usb/dvb-usb-v2/it913x.c | 822 ++ drivers/media/usb/dvb-usb-v2/lmedm04.c | 1379 ++++ drivers/media/usb/dvb-usb-v2/lmedm04.h | 175 + drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c | 612 ++ drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h | 55 + drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c | 763 ++ drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h | 56 + drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c | 850 ++ drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h | 35 + drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c | 343 + drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h | 53 + drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h | 179 + drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c | 527 ++ drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h | 88 + drivers/media/usb/dvb-usb-v2/mxl111sf.c | 1439 ++++ drivers/media/usb/dvb-usb-v2/mxl111sf.h | 160 + drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 1432 ++++ drivers/media/usb/dvb-usb-v2/rtl28xxu.h | 246 + drivers/media/usb/dvb-usb-v2/usb_urb.c | 362 + drivers/media/usb/dvb-usb/Kconfig | 319 + drivers/media/usb/dvb-usb/Makefile | 83 + drivers/media/usb/dvb-usb/a800.c | 191 + drivers/media/usb/dvb-usb/af9005-fe.c | 1487 ++++ drivers/media/usb/dvb-usb/af9005-remote.c | 157 + drivers/media/usb/dvb-usb/af9005-script.h | 203 + drivers/media/usb/dvb-usb/af9005.c | 1117 +++ drivers/media/usb/dvb-usb/af9005.h | 3496 +++++++++ drivers/media/usb/dvb-usb/az6027.c | 1183 +++ drivers/media/usb/dvb-usb/az6027.h | 14 + drivers/media/usb/dvb-usb/cinergyT2-core.c | 253 + drivers/media/usb/dvb-usb/cinergyT2-fe.c | 355 + drivers/media/usb/dvb-usb/cinergyT2.h | 95 + drivers/media/usb/dvb-usb/cxusb.c | 2087 +++++ drivers/media/usb/dvb-usb/cxusb.h | 35 + drivers/media/usb/dvb-usb/dib0700.h | 75 + drivers/media/usb/dvb-usb/dib0700_core.c | 844 ++ drivers/media/usb/dvb-usb/dib0700_devices.c | 4792 ++++++++++++ drivers/media/usb/dvb-usb/dib07x0.h | 21 + drivers/media/usb/dvb-usb/dibusb-common.c | 488 ++ drivers/media/usb/dvb-usb/dibusb-mb.c | 471 ++ drivers/media/usb/dvb-usb/dibusb-mc.c | 149 + drivers/media/usb/dvb-usb/dibusb.h | 131 + drivers/media/usb/dvb-usb/digitv.c | 354 + drivers/media/usb/dvb-usb/digitv.h | 66 + drivers/media/usb/dvb-usb/dtt200u-fe.c | 210 + drivers/media/usb/dvb-usb/dtt200u.c | 368 + drivers/media/usb/dvb-usb/dtt200u.h | 57 + drivers/media/usb/dvb-usb/dtv5100.c | 224 + drivers/media/usb/dvb-usb/dtv5100.h | 51 + drivers/media/usb/dvb-usb/dvb-usb-common.h | 52 + drivers/media/usb/dvb-usb/dvb-usb-dvb.c | 288 + drivers/media/usb/dvb-usb/dvb-usb-firmware.c | 146 + drivers/media/usb/dvb-usb/dvb-usb-i2c.c | 43 + drivers/media/usb/dvb-usb/dvb-usb-init.c | 304 + drivers/media/usb/dvb-usb/dvb-usb-remote.c | 391 + drivers/media/usb/dvb-usb/dvb-usb-urb.c | 121 + drivers/media/usb/dvb-usb/dvb-usb.h | 483 ++ drivers/media/usb/dvb-usb/dw2102.c | 2195 ++++++ drivers/media/usb/dvb-usb/dw2102.h | 9 + drivers/media/usb/dvb-usb/friio-fe.c | 472 ++ drivers/media/usb/dvb-usb/friio.c | 522 ++ drivers/media/usb/dvb-usb/friio.h | 99 + drivers/media/usb/dvb-usb/gp8psk-fe.c | 369 + drivers/media/usb/dvb-usb/gp8psk.c | 328 + drivers/media/usb/dvb-usb/gp8psk.h | 100 + drivers/media/usb/dvb-usb/m920x.c | 1276 +++ drivers/media/usb/dvb-usb/m920x.h | 77 + drivers/media/usb/dvb-usb/nova-t-usb2.c | 233 + drivers/media/usb/dvb-usb/opera1.c | 583 ++ drivers/media/usb/dvb-usb/pctv452e.c | 1063 +++ drivers/media/usb/dvb-usb/technisat-usb2.c | 790 ++ drivers/media/usb/dvb-usb/ttusb2.c | 826 ++ drivers/media/usb/dvb-usb/ttusb2.h | 70 + drivers/media/usb/dvb-usb/umt-010.c | 151 + drivers/media/usb/dvb-usb/usb-urb.c | 254 + drivers/media/usb/dvb-usb/vp702x-fe.c | 379 + drivers/media/usb/dvb-usb/vp702x.c | 444 ++ drivers/media/usb/dvb-usb/vp702x.h | 113 + drivers/media/usb/dvb-usb/vp7045-fe.c | 190 + drivers/media/usb/dvb-usb/vp7045.c | 302 + drivers/media/usb/dvb-usb/vp7045.h | 70 + drivers/media/usb/em28xx/Kconfig | 63 + drivers/media/usb/em28xx/Makefile | 15 + drivers/media/usb/em28xx/em28xx-audio.c | 751 ++ drivers/media/usb/em28xx/em28xx-camera.c | 434 ++ drivers/media/usb/em28xx/em28xx-cards.c | 3492 +++++++++ drivers/media/usb/em28xx/em28xx-core.c | 1341 ++++ drivers/media/usb/em28xx/em28xx-dvb.c | 1388 ++++ drivers/media/usb/em28xx/em28xx-i2c.c | 930 +++ drivers/media/usb/em28xx/em28xx-input.c | 729 ++ drivers/media/usb/em28xx/em28xx-reg.h | 248 + drivers/media/usb/em28xx/em28xx-vbi.c | 112 + drivers/media/usb/em28xx/em28xx-video.c | 2044 +++++ drivers/media/usb/em28xx/em28xx.h | 774 ++ drivers/media/usb/gspca/Kconfig | 425 + drivers/media/usb/gspca/Makefile | 93 + drivers/media/usb/gspca/autogain_functions.c | 178 + drivers/media/usb/gspca/benq.c | 289 + drivers/media/usb/gspca/conex.c | 964 +++ drivers/media/usb/gspca/cpia1.c | 1902 +++++ drivers/media/usb/gspca/etoms.c | 795 ++ drivers/media/usb/gspca/finepix.c | 310 + drivers/media/usb/gspca/gl860/Kconfig | 8 + drivers/media/usb/gspca/gl860/Makefile | 10 + drivers/media/usb/gspca/gl860/gl860-mi1320.c | 536 ++ drivers/media/usb/gspca/gl860/gl860-mi2020.c | 733 ++ drivers/media/usb/gspca/gl860/gl860-ov2640.c | 489 ++ drivers/media/usb/gspca/gl860/gl860-ov9655.c | 336 + drivers/media/usb/gspca/gl860/gl860.c | 741 ++ drivers/media/usb/gspca/gl860/gl860.h | 105 + drivers/media/usb/gspca/gspca.c | 2269 ++++++ drivers/media/usb/gspca/gspca.h | 235 + drivers/media/usb/gspca/jeilinj.c | 548 ++ drivers/media/usb/gspca/jl2005bcd.c | 539 ++ drivers/media/usb/gspca/jpeg.h | 168 + drivers/media/usb/gspca/kinect.c | 409 + drivers/media/usb/gspca/konica.c | 483 ++ drivers/media/usb/gspca/m5602/Kconfig | 11 + drivers/media/usb/gspca/m5602/Makefile | 11 + drivers/media/usb/gspca/m5602/m5602_bridge.h | 180 + drivers/media/usb/gspca/m5602/m5602_core.c | 438 ++ drivers/media/usb/gspca/m5602/m5602_mt9m111.c | 457 ++ drivers/media/usb/gspca/m5602/m5602_mt9m111.h | 273 + drivers/media/usb/gspca/m5602/m5602_ov7660.c | 318 + drivers/media/usb/gspca/m5602/m5602_ov7660.h | 263 + drivers/media/usb/gspca/m5602/m5602_ov9650.c | 636 ++ drivers/media/usb/gspca/m5602/m5602_ov9650.h | 309 + drivers/media/usb/gspca/m5602/m5602_po1030.c | 518 ++ drivers/media/usb/gspca/m5602/m5602_po1030.h | 274 + drivers/media/usb/gspca/m5602/m5602_s5k4aa.c | 564 ++ drivers/media/usb/gspca/m5602/m5602_s5k4aa.h | 285 + drivers/media/usb/gspca/m5602/m5602_s5k83a.c | 456 ++ drivers/media/usb/gspca/m5602/m5602_s5k83a.h | 188 + drivers/media/usb/gspca/m5602/m5602_sensor.h | 73 + drivers/media/usb/gspca/mars.c | 439 ++ drivers/media/usb/gspca/mr97310a.c | 1091 +++ drivers/media/usb/gspca/nw80x.c | 2110 +++++ drivers/media/usb/gspca/ov519.c | 5016 ++++++++++++ drivers/media/usb/gspca/ov534.c | 1544 ++++ drivers/media/usb/gspca/ov534_9.c | 1500 ++++ drivers/media/usb/gspca/pac207.c | 489 ++ drivers/media/usb/gspca/pac7302.c | 983 +++ drivers/media/usb/gspca/pac7311.c | 700 ++ drivers/media/usb/gspca/pac_common.h | 134 + drivers/media/usb/gspca/se401.c | 739 ++ drivers/media/usb/gspca/se401.h | 90 + drivers/media/usb/gspca/sn9c2028.c | 735 ++ drivers/media/usb/gspca/sn9c2028.h | 51 + drivers/media/usb/gspca/sn9c20x.c | 2431 ++++++ drivers/media/usb/gspca/sonixb.c | 1482 ++++ drivers/media/usb/gspca/sonixj.c | 2991 ++++++++ drivers/media/usb/gspca/spca1528.c | 444 ++ drivers/media/usb/gspca/spca500.c | 990 +++ drivers/media/usb/gspca/spca501.c | 2050 +++++ drivers/media/usb/gspca/spca505.c | 805 ++ drivers/media/usb/gspca/spca506.c | 611 ++ drivers/media/usb/gspca/spca508.c | 1535 ++++ drivers/media/usb/gspca/spca561.c | 932 +++ drivers/media/usb/gspca/sq905.c | 439 ++ drivers/media/usb/gspca/sq905c.c | 342 + drivers/media/usb/gspca/sq930x.c | 1162 +++ drivers/media/usb/gspca/stk014.c | 446 ++ drivers/media/usb/gspca/stv0680.c | 353 + drivers/media/usb/gspca/stv06xx/Kconfig | 9 + drivers/media/usb/gspca/stv06xx/Makefile | 10 + drivers/media/usb/gspca/stv06xx/stv06xx.c | 639 ++ drivers/media/usb/gspca/stv06xx/stv06xx.h | 116 + drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.c | 544 ++ drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h | 206 + drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c | 436 ++ drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.h | 144 + drivers/media/usb/gspca/stv06xx/stv06xx_sensor.h | 87 + drivers/media/usb/gspca/stv06xx/stv06xx_st6422.c | 287 + drivers/media/usb/gspca/stv06xx/stv06xx_st6422.h | 52 + drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c | 281 + drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.h | 255 + drivers/media/usb/gspca/sunplus.c | 1074 +++ drivers/media/usb/gspca/t613.c | 1054 +++ drivers/media/usb/gspca/topro.c | 4969 ++++++++++++ drivers/media/usb/gspca/tv8532.c | 378 + drivers/media/usb/gspca/vc032x.c | 3843 ++++++++++ drivers/media/usb/gspca/vicam.c | 364 + drivers/media/usb/gspca/w996Xcf.c | 570 ++ drivers/media/usb/gspca/xirlink_cit.c | 3143 ++++++++ drivers/media/usb/gspca/zc3xx-reg.h | 251 + drivers/media/usb/gspca/zc3xx.c | 7020 +++++++++++++++++ drivers/media/usb/hdpvr/Kconfig | 10 + drivers/media/usb/hdpvr/Makefile | 7 + drivers/media/usb/hdpvr/hdpvr-control.c | 200 + drivers/media/usb/hdpvr/hdpvr-core.c | 478 ++ drivers/media/usb/hdpvr/hdpvr-i2c.c | 230 + drivers/media/usb/hdpvr/hdpvr-video.c | 1248 +++ drivers/media/usb/hdpvr/hdpvr.h | 330 + drivers/media/usb/pvrusb2/Kconfig | 65 + drivers/media/usb/pvrusb2/Makefile | 22 + drivers/media/usb/pvrusb2/pvrusb2-audio.c | 96 + drivers/media/usb/pvrusb2/pvrusb2-audio.h | 37 + drivers/media/usb/pvrusb2/pvrusb2-context.c | 431 ++ drivers/media/usb/pvrusb2/pvrusb2-context.h | 94 + drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c | 95 + drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.h | 48 + drivers/media/usb/pvrusb2/pvrusb2-ctrl.c | 609 ++ drivers/media/usb/pvrusb2/pvrusb2-ctrl.h | 122 + drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c | 166 + drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.h | 52 + drivers/media/usb/pvrusb2/pvrusb2-debug.h | 69 + drivers/media/usb/pvrusb2/pvrusb2-debugifc.c | 335 + drivers/media/usb/pvrusb2/pvrusb2-debugifc.h | 52 + drivers/media/usb/pvrusb2/pvrusb2-devattr.c | 576 ++ drivers/media/usb/pvrusb2/pvrusb2-devattr.h | 199 + drivers/media/usb/pvrusb2/pvrusb2-dvb.c | 435 ++ drivers/media/usb/pvrusb2/pvrusb2-dvb.h | 41 + drivers/media/usb/pvrusb2/pvrusb2-eeprom.c | 164 + drivers/media/usb/pvrusb2/pvrusb2-eeprom.h | 39 + drivers/media/usb/pvrusb2/pvrusb2-encoder.c | 551 ++ drivers/media/usb/pvrusb2/pvrusb2-encoder.h | 42 + drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h | 72 + drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h | 406 + drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 5202 +++++++++++++ drivers/media/usb/pvrusb2/pvrusb2-hdw.h | 360 + drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c | 698 ++ drivers/media/usb/pvrusb2/pvrusb2-i2c-core.h | 40 + drivers/media/usb/pvrusb2/pvrusb2-io.c | 695 ++ drivers/media/usb/pvrusb2/pvrusb2-io.h | 102 + drivers/media/usb/pvrusb2/pvrusb2-ioread.c | 512 ++ drivers/media/usb/pvrusb2/pvrusb2-ioread.h | 48 + drivers/media/usb/pvrusb2/pvrusb2-main.c | 182 + drivers/media/usb/pvrusb2/pvrusb2-std.c | 411 + drivers/media/usb/pvrusb2/pvrusb2-std.h | 59 + drivers/media/usb/pvrusb2/pvrusb2-sysfs.c | 861 +++ drivers/media/usb/pvrusb2/pvrusb2-sysfs.h | 46 + drivers/media/usb/pvrusb2/pvrusb2-util.h | 62 + drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 1413 ++++ drivers/media/usb/pvrusb2/pvrusb2-v4l2.h | 39 + drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c | 114 + drivers/media/usb/pvrusb2/pvrusb2-video-v4l.h | 48 + drivers/media/usb/pvrusb2/pvrusb2-wm8775.c | 70 + drivers/media/usb/pvrusb2/pvrusb2-wm8775.h | 52 + drivers/media/usb/pvrusb2/pvrusb2.h | 42 + drivers/media/usb/pwc/Kconfig | 48 + drivers/media/usb/pwc/Makefile | 4 + drivers/media/usb/pwc/philips.txt | 236 + drivers/media/usb/pwc/pwc-ctrl.c | 555 ++ drivers/media/usb/pwc/pwc-dec1.c | 32 + drivers/media/usb/pwc/pwc-dec1.h | 39 + drivers/media/usb/pwc/pwc-dec23.c | 691 ++ drivers/media/usb/pwc/pwc-dec23.h | 61 + drivers/media/usb/pwc/pwc-if.c | 1170 +++ drivers/media/usb/pwc/pwc-kiara.c | 892 +++ drivers/media/usb/pwc/pwc-kiara.h | 48 + drivers/media/usb/pwc/pwc-misc.c | 93 + drivers/media/usb/pwc/pwc-nala.h | 66 + drivers/media/usb/pwc/pwc-timon.c | 1448 ++++ drivers/media/usb/pwc/pwc-timon.h | 63 + drivers/media/usb/pwc/pwc-uncompress.c | 107 + drivers/media/usb/pwc/pwc-v4l.c | 1052 +++ drivers/media/usb/pwc/pwc.h | 393 + drivers/media/usb/s2255/Kconfig | 9 + drivers/media/usb/s2255/Makefile | 2 + drivers/media/usb/s2255/s2255drv.c | 2671 +++++++ drivers/media/usb/siano/Kconfig | 11 + drivers/media/usb/siano/Makefile | 6 + drivers/media/usb/siano/smsusb.c | 656 ++ drivers/media/usb/sn9c102/Kconfig | 14 + drivers/media/usb/sn9c102/Makefile | 15 + drivers/media/usb/sn9c102/sn9c102.h | 211 + drivers/media/usb/sn9c102/sn9c102_config.h | 86 + drivers/media/usb/sn9c102/sn9c102_core.c | 3423 +++++++++ drivers/media/usb/sn9c102/sn9c102_devtable.h | 147 + drivers/media/usb/sn9c102/sn9c102_hv7131d.c | 264 + drivers/media/usb/sn9c102/sn9c102_hv7131r.c | 363 + drivers/media/usb/sn9c102/sn9c102_mi0343.c | 352 + drivers/media/usb/sn9c102/sn9c102_mi0360.c | 453 ++ drivers/media/usb/sn9c102/sn9c102_mt9v111.c | 260 + drivers/media/usb/sn9c102/sn9c102_ov7630.c | 626 ++ drivers/media/usb/sn9c102/sn9c102_ov7660.c | 538 ++ drivers/media/usb/sn9c102/sn9c102_pas106b.c | 302 + drivers/media/usb/sn9c102/sn9c102_pas202bcb.c | 335 + drivers/media/usb/sn9c102/sn9c102_sensor.h | 307 + drivers/media/usb/sn9c102/sn9c102_tas5110c1b.c | 154 + drivers/media/usb/sn9c102/sn9c102_tas5110d.c | 119 + drivers/media/usb/sn9c102/sn9c102_tas5130d1b.c | 165 + drivers/media/usb/stk1160/Kconfig | 20 + drivers/media/usb/stk1160/Makefile | 11 + drivers/media/usb/stk1160/stk1160-ac97.c | 152 + drivers/media/usb/stk1160/stk1160-core.c | 445 ++ drivers/media/usb/stk1160/stk1160-i2c.c | 294 + drivers/media/usb/stk1160/stk1160-reg.h | 93 + drivers/media/usb/stk1160/stk1160-v4l.c | 740 ++ drivers/media/usb/stk1160/stk1160-video.c | 541 ++ drivers/media/usb/stk1160/stk1160.h | 209 + drivers/media/usb/stkwebcam/Kconfig | 13 + drivers/media/usb/stkwebcam/Makefile | 4 + drivers/media/usb/stkwebcam/stk-sensor.c | 595 ++ drivers/media/usb/stkwebcam/stk-webcam.c | 1435 ++++ drivers/media/usb/stkwebcam/stk-webcam.h | 140 + drivers/media/usb/tlg2300/Kconfig | 16 + drivers/media/usb/tlg2300/Makefile | 9 + drivers/media/usb/tlg2300/pd-alsa.c | 336 + drivers/media/usb/tlg2300/pd-common.h | 271 + drivers/media/usb/tlg2300/pd-dvb.c | 597 ++ drivers/media/usb/tlg2300/pd-main.c | 532 ++ drivers/media/usb/tlg2300/pd-radio.c | 340 + drivers/media/usb/tlg2300/pd-video.c | 1571 ++++ drivers/media/usb/tlg2300/vendorcmds.h | 243 + drivers/media/usb/tm6000/Kconfig | 33 + drivers/media/usb/tm6000/Makefile | 15 + drivers/media/usb/tm6000/tm6000-alsa.c | 529 ++ drivers/media/usb/tm6000/tm6000-cards.c | 1413 ++++ drivers/media/usb/tm6000/tm6000-core.c | 938 +++ drivers/media/usb/tm6000/tm6000-dvb.c | 467 ++ drivers/media/usb/tm6000/tm6000-i2c.c | 334 + drivers/media/usb/tm6000/tm6000-input.c | 501 ++ drivers/media/usb/tm6000/tm6000-regs.h | 600 ++ drivers/media/usb/tm6000/tm6000-stds.c | 638 ++ drivers/media/usb/tm6000/tm6000-usb-isoc.h | 50 + drivers/media/usb/tm6000/tm6000-video.c | 1751 +++++ drivers/media/usb/tm6000/tm6000.h | 409 + drivers/media/usb/ttusb-budget/Kconfig | 18 + drivers/media/usb/ttusb-budget/Makefile | 3 + drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 1823 +++++ drivers/media/usb/ttusb-dec/Kconfig | 21 + drivers/media/usb/ttusb-dec/Makefile | 3 + drivers/media/usb/ttusb-dec/ttusb_dec.c | 1764 +++++ drivers/media/usb/ttusb-dec/ttusbdecfe.c | 301 + drivers/media/usb/ttusb-dec/ttusbdecfe.h | 38 + drivers/media/usb/usbvision/Kconfig | 12 + drivers/media/usb/usbvision/Makefile | 6 + drivers/media/usb/usbvision/usbvision-cards.c | 1133 +++ drivers/media/usb/usbvision/usbvision-cards.h | 69 + drivers/media/usb/usbvision/usbvision-core.c | 2518 ++++++ drivers/media/usb/usbvision/usbvision-i2c.c | 455 ++ drivers/media/usb/usbvision/usbvision-video.c | 1720 +++++ drivers/media/usb/usbvision/usbvision.h | 535 ++ drivers/media/usb/uvc/Kconfig | 19 + drivers/media/usb/uvc/Makefile | 6 + drivers/media/usb/uvc/uvc_ctrl.c | 2171 ++++++ drivers/media/usb/uvc/uvc_debugfs.c | 136 + drivers/media/usb/uvc/uvc_driver.c | 2472 ++++++ drivers/media/usb/uvc/uvc_entity.c | 128 + drivers/media/usb/uvc/uvc_isight.c | 137 + drivers/media/usb/uvc/uvc_queue.c | 383 + drivers/media/usb/uvc/uvc_status.c | 237 + drivers/media/usb/uvc/uvc_v4l2.c | 1366 ++++ drivers/media/usb/uvc/uvc_video.c | 1905 +++++ drivers/media/usb/uvc/uvcvideo.h | 726 ++ drivers/media/usb/zr364xx/Kconfig | 14 + drivers/media/usb/zr364xx/Makefile | 2 + drivers/media/usb/zr364xx/zr364xx.c | 1640 ++++ drivers/media/v4l2-core/Kconfig | 96 + drivers/media/v4l2-core/Makefile | 39 + drivers/media/v4l2-core/tuner-core.c | 1353 ++++ drivers/media/v4l2-core/v4l2-common.c | 939 +++ drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 1109 +++ drivers/media/v4l2-core/v4l2-ctrls.c | 2928 +++++++ drivers/media/v4l2-core/v4l2-dev.c | 1027 +++ drivers/media/v4l2-core/v4l2-device.c | 278 + drivers/media/v4l2-core/v4l2-event.c | 320 + drivers/media/v4l2-core/v4l2-fh.c | 120 + drivers/media/v4l2-core/v4l2-int-device.c | 164 + drivers/media/v4l2-core/v4l2-ioctl.c | 2431 ++++++ drivers/media/v4l2-core/v4l2-mem2mem.c | 705 ++ drivers/media/v4l2-core/v4l2-of.c | 266 + drivers/media/v4l2-core/v4l2-subdev.c | 476 ++ drivers/media/v4l2-core/videobuf-core.c | 1193 +++ drivers/media/v4l2-core/videobuf-dma-contig.c | 408 + drivers/media/v4l2-core/videobuf-dma-sg.c | 633 ++ drivers/media/v4l2-core/videobuf-dvb.c | 398 + drivers/media/v4l2-core/videobuf-vmalloc.c | 349 + drivers/media/v4l2-core/videobuf2-core.c | 2719 +++++++ drivers/media/v4l2-core/videobuf2-dma-contig.c | 774 ++ drivers/media/v4l2-core/videobuf2-dma-sg.c | 294 + drivers/media/v4l2-core/videobuf2-memops.c | 187 + drivers/media/v4l2-core/videobuf2-vmalloc.c | 279 + 1953 files changed, 970540 insertions(+) create mode 100644 drivers/media/Kconfig create mode 100644 drivers/media/Makefile create mode 100644 drivers/media/common/Kconfig create mode 100644 drivers/media/common/Makefile create mode 100644 drivers/media/common/b2c2/Kconfig create mode 100644 drivers/media/common/b2c2/Makefile create mode 100644 drivers/media/common/b2c2/flexcop-common.h create mode 100644 drivers/media/common/b2c2/flexcop-eeprom.c create mode 100644 drivers/media/common/b2c2/flexcop-fe-tuner.c create mode 100644 drivers/media/common/b2c2/flexcop-hw-filter.c create mode 100644 drivers/media/common/b2c2/flexcop-i2c.c create mode 100644 drivers/media/common/b2c2/flexcop-misc.c create mode 100644 drivers/media/common/b2c2/flexcop-reg.h create mode 100644 drivers/media/common/b2c2/flexcop-sram.c create mode 100644 drivers/media/common/b2c2/flexcop.c create mode 100644 drivers/media/common/b2c2/flexcop.h create mode 100644 drivers/media/common/b2c2/flexcop_ibi_value_be.h create mode 100644 drivers/media/common/b2c2/flexcop_ibi_value_le.h create mode 100644 drivers/media/common/btcx-risc.c create mode 100644 drivers/media/common/btcx-risc.h create mode 100644 drivers/media/common/cx2341x.c create mode 100644 drivers/media/common/cypress_firmware.c create mode 100644 drivers/media/common/cypress_firmware.h create mode 100644 drivers/media/common/saa7146/Kconfig create mode 100644 drivers/media/common/saa7146/Makefile create mode 100644 drivers/media/common/saa7146/saa7146_core.c create mode 100644 drivers/media/common/saa7146/saa7146_fops.c create mode 100644 drivers/media/common/saa7146/saa7146_hlp.c create mode 100644 drivers/media/common/saa7146/saa7146_i2c.c create mode 100644 drivers/media/common/saa7146/saa7146_vbi.c create mode 100644 drivers/media/common/saa7146/saa7146_video.c create mode 100644 drivers/media/common/siano/Kconfig create mode 100644 drivers/media/common/siano/Makefile create mode 100644 drivers/media/common/siano/sms-cards.c create mode 100644 drivers/media/common/siano/sms-cards.h create mode 100644 drivers/media/common/siano/smscoreapi.c create mode 100644 drivers/media/common/siano/smscoreapi.h create mode 100644 drivers/media/common/siano/smsdvb-debugfs.c create mode 100644 drivers/media/common/siano/smsdvb-main.c create mode 100644 drivers/media/common/siano/smsdvb.h create mode 100644 drivers/media/common/siano/smsendian.c create mode 100644 drivers/media/common/siano/smsendian.h create mode 100644 drivers/media/common/siano/smsir.c create mode 100644 drivers/media/common/siano/smsir.h create mode 100644 drivers/media/common/tveeprom.c create mode 100644 drivers/media/dvb-core/Kconfig create mode 100644 drivers/media/dvb-core/Makefile create mode 100644 drivers/media/dvb-core/demux.h create mode 100644 drivers/media/dvb-core/dmxdev.c create mode 100644 drivers/media/dvb-core/dmxdev.h create mode 100644 drivers/media/dvb-core/dvb-usb-ids.h create mode 100644 drivers/media/dvb-core/dvb_ca_en50221.c create mode 100644 drivers/media/dvb-core/dvb_ca_en50221.h create mode 100644 drivers/media/dvb-core/dvb_demux.c create mode 100644 drivers/media/dvb-core/dvb_demux.h create mode 100644 drivers/media/dvb-core/dvb_filter.c create mode 100644 drivers/media/dvb-core/dvb_filter.h create mode 100644 drivers/media/dvb-core/dvb_frontend.c create mode 100644 drivers/media/dvb-core/dvb_frontend.h create mode 100644 drivers/media/dvb-core/dvb_math.c create mode 100644 drivers/media/dvb-core/dvb_math.h create mode 100644 drivers/media/dvb-core/dvb_net.c create mode 100644 drivers/media/dvb-core/dvb_net.h create mode 100644 drivers/media/dvb-core/dvb_ringbuffer.c create mode 100644 drivers/media/dvb-core/dvb_ringbuffer.h create mode 100644 drivers/media/dvb-core/dvbdev.c create mode 100644 drivers/media/dvb-core/dvbdev.h create mode 100644 drivers/media/dvb-frontends/Kconfig create mode 100644 drivers/media/dvb-frontends/Makefile create mode 100644 drivers/media/dvb-frontends/a8293.c create mode 100644 drivers/media/dvb-frontends/a8293.h create mode 100644 drivers/media/dvb-frontends/af9013.c create mode 100644 drivers/media/dvb-frontends/af9013.h create mode 100644 drivers/media/dvb-frontends/af9013_priv.h create mode 100644 drivers/media/dvb-frontends/af9033.c create mode 100644 drivers/media/dvb-frontends/af9033.h create mode 100644 drivers/media/dvb-frontends/af9033_priv.h create mode 100644 drivers/media/dvb-frontends/atbm8830.c create mode 100644 drivers/media/dvb-frontends/atbm8830.h create mode 100644 drivers/media/dvb-frontends/atbm8830_priv.h create mode 100644 drivers/media/dvb-frontends/au8522.h create mode 100644 drivers/media/dvb-frontends/au8522_common.c create mode 100644 drivers/media/dvb-frontends/au8522_decoder.c create mode 100644 drivers/media/dvb-frontends/au8522_dig.c create mode 100644 drivers/media/dvb-frontends/au8522_priv.h create mode 100644 drivers/media/dvb-frontends/bcm3510.c create mode 100644 drivers/media/dvb-frontends/bcm3510.h create mode 100644 drivers/media/dvb-frontends/bcm3510_priv.h create mode 100644 drivers/media/dvb-frontends/bsbe1-d01a.h create mode 100644 drivers/media/dvb-frontends/bsbe1.h create mode 100644 drivers/media/dvb-frontends/bsru6.h create mode 100644 drivers/media/dvb-frontends/cx22700.c create mode 100644 drivers/media/dvb-frontends/cx22700.h create mode 100644 drivers/media/dvb-frontends/cx22702.c create mode 100644 drivers/media/dvb-frontends/cx22702.h create mode 100644 drivers/media/dvb-frontends/cx24110.c create mode 100644 drivers/media/dvb-frontends/cx24110.h create mode 100644 drivers/media/dvb-frontends/cx24113.c create mode 100644 drivers/media/dvb-frontends/cx24113.h create mode 100644 drivers/media/dvb-frontends/cx24116.c create mode 100644 drivers/media/dvb-frontends/cx24116.h create mode 100644 drivers/media/dvb-frontends/cx24123.c create mode 100644 drivers/media/dvb-frontends/cx24123.h create mode 100644 drivers/media/dvb-frontends/cxd2820r.h create mode 100644 drivers/media/dvb-frontends/cxd2820r_c.c create mode 100644 drivers/media/dvb-frontends/cxd2820r_core.c create mode 100644 drivers/media/dvb-frontends/cxd2820r_priv.h create mode 100644 drivers/media/dvb-frontends/cxd2820r_t.c create mode 100644 drivers/media/dvb-frontends/cxd2820r_t2.c create mode 100644 drivers/media/dvb-frontends/dib0070.c create mode 100644 drivers/media/dvb-frontends/dib0070.h create mode 100644 drivers/media/dvb-frontends/dib0090.c create mode 100644 drivers/media/dvb-frontends/dib0090.h create mode 100644 drivers/media/dvb-frontends/dib3000.h create mode 100644 drivers/media/dvb-frontends/dib3000mb.c create mode 100644 drivers/media/dvb-frontends/dib3000mb_priv.h create mode 100644 drivers/media/dvb-frontends/dib3000mc.c create mode 100644 drivers/media/dvb-frontends/dib3000mc.h create mode 100644 drivers/media/dvb-frontends/dib7000m.c create mode 100644 drivers/media/dvb-frontends/dib7000m.h create mode 100644 drivers/media/dvb-frontends/dib7000p.c create mode 100644 drivers/media/dvb-frontends/dib7000p.h create mode 100644 drivers/media/dvb-frontends/dib8000.c create mode 100644 drivers/media/dvb-frontends/dib8000.h create mode 100644 drivers/media/dvb-frontends/dib9000.c create mode 100644 drivers/media/dvb-frontends/dib9000.h create mode 100644 drivers/media/dvb-frontends/dibx000_common.c create mode 100644 drivers/media/dvb-frontends/dibx000_common.h create mode 100644 drivers/media/dvb-frontends/drxd.h create mode 100644 drivers/media/dvb-frontends/drxd_firm.c create mode 100644 drivers/media/dvb-frontends/drxd_firm.h create mode 100644 drivers/media/dvb-frontends/drxd_hard.c create mode 100644 drivers/media/dvb-frontends/drxd_map_firm.h create mode 100644 drivers/media/dvb-frontends/drxk.h create mode 100644 drivers/media/dvb-frontends/drxk_hard.c create mode 100644 drivers/media/dvb-frontends/drxk_hard.h create mode 100644 drivers/media/dvb-frontends/drxk_map.h create mode 100644 drivers/media/dvb-frontends/ds3000.c create mode 100644 drivers/media/dvb-frontends/ds3000.h create mode 100644 drivers/media/dvb-frontends/dvb-pll.c create mode 100644 drivers/media/dvb-frontends/dvb-pll.h create mode 100644 drivers/media/dvb-frontends/dvb_dummy_fe.c create mode 100644 drivers/media/dvb-frontends/dvb_dummy_fe.h create mode 100644 drivers/media/dvb-frontends/ec100.c create mode 100644 drivers/media/dvb-frontends/ec100.h create mode 100644 drivers/media/dvb-frontends/eds1547.h create mode 100644 drivers/media/dvb-frontends/hd29l2.c create mode 100644 drivers/media/dvb-frontends/hd29l2.h create mode 100644 drivers/media/dvb-frontends/hd29l2_priv.h create mode 100644 drivers/media/dvb-frontends/isl6405.c create mode 100644 drivers/media/dvb-frontends/isl6405.h create mode 100644 drivers/media/dvb-frontends/isl6421.c create mode 100644 drivers/media/dvb-frontends/isl6421.h create mode 100644 drivers/media/dvb-frontends/isl6423.c create mode 100644 drivers/media/dvb-frontends/isl6423.h create mode 100644 drivers/media/dvb-frontends/it913x-fe-priv.h create mode 100644 drivers/media/dvb-frontends/it913x-fe.c create mode 100644 drivers/media/dvb-frontends/it913x-fe.h create mode 100644 drivers/media/dvb-frontends/itd1000.c create mode 100644 drivers/media/dvb-frontends/itd1000.h create mode 100644 drivers/media/dvb-frontends/itd1000_priv.h create mode 100644 drivers/media/dvb-frontends/ix2505v.c create mode 100644 drivers/media/dvb-frontends/ix2505v.h create mode 100644 drivers/media/dvb-frontends/l64781.c create mode 100644 drivers/media/dvb-frontends/l64781.h create mode 100644 drivers/media/dvb-frontends/lg2160.c create mode 100644 drivers/media/dvb-frontends/lg2160.h create mode 100644 drivers/media/dvb-frontends/lgdt3305.c create mode 100644 drivers/media/dvb-frontends/lgdt3305.h create mode 100644 drivers/media/dvb-frontends/lgdt330x.c create mode 100644 drivers/media/dvb-frontends/lgdt330x.h create mode 100644 drivers/media/dvb-frontends/lgdt330x_priv.h create mode 100644 drivers/media/dvb-frontends/lgs8gl5.c create mode 100644 drivers/media/dvb-frontends/lgs8gl5.h create mode 100644 drivers/media/dvb-frontends/lgs8gxx.c create mode 100644 drivers/media/dvb-frontends/lgs8gxx.h create mode 100644 drivers/media/dvb-frontends/lgs8gxx_priv.h create mode 100644 drivers/media/dvb-frontends/lnbh24.h create mode 100644 drivers/media/dvb-frontends/lnbp21.c create mode 100644 drivers/media/dvb-frontends/lnbp21.h create mode 100644 drivers/media/dvb-frontends/lnbp22.c create mode 100644 drivers/media/dvb-frontends/lnbp22.h create mode 100644 drivers/media/dvb-frontends/m88rs2000.c create mode 100644 drivers/media/dvb-frontends/m88rs2000.h create mode 100644 drivers/media/dvb-frontends/mb86a16.c create mode 100644 drivers/media/dvb-frontends/mb86a16.h create mode 100644 drivers/media/dvb-frontends/mb86a16_priv.h create mode 100644 drivers/media/dvb-frontends/mb86a20s.c create mode 100644 drivers/media/dvb-frontends/mb86a20s.h create mode 100644 drivers/media/dvb-frontends/mt312.c create mode 100644 drivers/media/dvb-frontends/mt312.h create mode 100644 drivers/media/dvb-frontends/mt312_priv.h create mode 100644 drivers/media/dvb-frontends/mt352.c create mode 100644 drivers/media/dvb-frontends/mt352.h create mode 100644 drivers/media/dvb-frontends/mt352_priv.h create mode 100644 drivers/media/dvb-frontends/nxt200x.c create mode 100644 drivers/media/dvb-frontends/nxt200x.h create mode 100644 drivers/media/dvb-frontends/nxt6000.c create mode 100644 drivers/media/dvb-frontends/nxt6000.h create mode 100644 drivers/media/dvb-frontends/nxt6000_priv.h create mode 100644 drivers/media/dvb-frontends/or51132.c create mode 100644 drivers/media/dvb-frontends/or51132.h create mode 100644 drivers/media/dvb-frontends/or51211.c create mode 100644 drivers/media/dvb-frontends/or51211.h create mode 100644 drivers/media/dvb-frontends/rtl2830.c create mode 100644 drivers/media/dvb-frontends/rtl2830.h create mode 100644 drivers/media/dvb-frontends/rtl2830_priv.h create mode 100644 drivers/media/dvb-frontends/rtl2832.c create mode 100644 drivers/media/dvb-frontends/rtl2832.h create mode 100644 drivers/media/dvb-frontends/rtl2832_priv.h create mode 100644 drivers/media/dvb-frontends/s5h1409.c create mode 100644 drivers/media/dvb-frontends/s5h1409.h create mode 100644 drivers/media/dvb-frontends/s5h1411.c create mode 100644 drivers/media/dvb-frontends/s5h1411.h create mode 100644 drivers/media/dvb-frontends/s5h1420.c create mode 100644 drivers/media/dvb-frontends/s5h1420.h create mode 100644 drivers/media/dvb-frontends/s5h1420_priv.h create mode 100644 drivers/media/dvb-frontends/s5h1432.c create mode 100644 drivers/media/dvb-frontends/s5h1432.h create mode 100644 drivers/media/dvb-frontends/s921.c create mode 100644 drivers/media/dvb-frontends/s921.h create mode 100644 drivers/media/dvb-frontends/si21xx.c create mode 100644 drivers/media/dvb-frontends/si21xx.h create mode 100644 drivers/media/dvb-frontends/sp8870.c create mode 100644 drivers/media/dvb-frontends/sp8870.h create mode 100644 drivers/media/dvb-frontends/sp887x.c create mode 100644 drivers/media/dvb-frontends/sp887x.h create mode 100644 drivers/media/dvb-frontends/stb0899_algo.c create mode 100644 drivers/media/dvb-frontends/stb0899_cfg.h create mode 100644 drivers/media/dvb-frontends/stb0899_drv.c create mode 100644 drivers/media/dvb-frontends/stb0899_drv.h create mode 100644 drivers/media/dvb-frontends/stb0899_priv.h create mode 100644 drivers/media/dvb-frontends/stb0899_reg.h create mode 100644 drivers/media/dvb-frontends/stb6000.c create mode 100644 drivers/media/dvb-frontends/stb6000.h create mode 100644 drivers/media/dvb-frontends/stb6100.c create mode 100644 drivers/media/dvb-frontends/stb6100.h create mode 100644 drivers/media/dvb-frontends/stb6100_cfg.h create mode 100644 drivers/media/dvb-frontends/stb6100_proc.h create mode 100644 drivers/media/dvb-frontends/stv0288.c create mode 100644 drivers/media/dvb-frontends/stv0288.h create mode 100644 drivers/media/dvb-frontends/stv0297.c create mode 100644 drivers/media/dvb-frontends/stv0297.h create mode 100644 drivers/media/dvb-frontends/stv0299.c create mode 100644 drivers/media/dvb-frontends/stv0299.h create mode 100644 drivers/media/dvb-frontends/stv0367.c create mode 100644 drivers/media/dvb-frontends/stv0367.h create mode 100644 drivers/media/dvb-frontends/stv0367_priv.h create mode 100644 drivers/media/dvb-frontends/stv0367_regs.h create mode 100644 drivers/media/dvb-frontends/stv0900.h create mode 100644 drivers/media/dvb-frontends/stv0900_core.c create mode 100644 drivers/media/dvb-frontends/stv0900_init.h create mode 100644 drivers/media/dvb-frontends/stv0900_priv.h create mode 100644 drivers/media/dvb-frontends/stv0900_reg.h create mode 100644 drivers/media/dvb-frontends/stv0900_sw.c create mode 100644 drivers/media/dvb-frontends/stv090x.c create mode 100644 drivers/media/dvb-frontends/stv090x.h create mode 100644 drivers/media/dvb-frontends/stv090x_priv.h create mode 100644 drivers/media/dvb-frontends/stv090x_reg.h create mode 100644 drivers/media/dvb-frontends/stv6110.c create mode 100644 drivers/media/dvb-frontends/stv6110.h create mode 100644 drivers/media/dvb-frontends/stv6110x.c create mode 100644 drivers/media/dvb-frontends/stv6110x.h create mode 100644 drivers/media/dvb-frontends/stv6110x_priv.h create mode 100644 drivers/media/dvb-frontends/stv6110x_reg.h create mode 100644 drivers/media/dvb-frontends/tda10021.c create mode 100644 drivers/media/dvb-frontends/tda10023.c create mode 100644 drivers/media/dvb-frontends/tda1002x.h create mode 100644 drivers/media/dvb-frontends/tda10048.c create mode 100644 drivers/media/dvb-frontends/tda10048.h create mode 100644 drivers/media/dvb-frontends/tda1004x.c create mode 100644 drivers/media/dvb-frontends/tda1004x.h create mode 100644 drivers/media/dvb-frontends/tda10071.c create mode 100644 drivers/media/dvb-frontends/tda10071.h create mode 100644 drivers/media/dvb-frontends/tda10071_priv.h create mode 100644 drivers/media/dvb-frontends/tda10086.c create mode 100644 drivers/media/dvb-frontends/tda10086.h create mode 100644 drivers/media/dvb-frontends/tda18271c2dd.c create mode 100644 drivers/media/dvb-frontends/tda18271c2dd.h create mode 100644 drivers/media/dvb-frontends/tda18271c2dd_maps.h create mode 100644 drivers/media/dvb-frontends/tda665x.c create mode 100644 drivers/media/dvb-frontends/tda665x.h create mode 100644 drivers/media/dvb-frontends/tda8083.c create mode 100644 drivers/media/dvb-frontends/tda8083.h create mode 100644 drivers/media/dvb-frontends/tda8261.c create mode 100644 drivers/media/dvb-frontends/tda8261.h create mode 100644 drivers/media/dvb-frontends/tda8261_cfg.h create mode 100644 drivers/media/dvb-frontends/tda826x.c create mode 100644 drivers/media/dvb-frontends/tda826x.h create mode 100644 drivers/media/dvb-frontends/tdhd1.h create mode 100644 drivers/media/dvb-frontends/ts2020.c create mode 100644 drivers/media/dvb-frontends/ts2020.h create mode 100644 drivers/media/dvb-frontends/tua6100.c create mode 100644 drivers/media/dvb-frontends/tua6100.h create mode 100644 drivers/media/dvb-frontends/ves1820.c create mode 100644 drivers/media/dvb-frontends/ves1820.h create mode 100644 drivers/media/dvb-frontends/ves1x93.c create mode 100644 drivers/media/dvb-frontends/ves1x93.h create mode 100644 drivers/media/dvb-frontends/z0194a.h create mode 100644 drivers/media/dvb-frontends/zl10036.c create mode 100644 drivers/media/dvb-frontends/zl10036.h create mode 100644 drivers/media/dvb-frontends/zl10039.c create mode 100644 drivers/media/dvb-frontends/zl10039.h create mode 100644 drivers/media/dvb-frontends/zl10353.c create mode 100644 drivers/media/dvb-frontends/zl10353.h create mode 100644 drivers/media/dvb-frontends/zl10353_priv.h create mode 100644 drivers/media/firewire/Kconfig create mode 100644 drivers/media/firewire/Makefile create mode 100644 drivers/media/firewire/firedtv-avc.c create mode 100644 drivers/media/firewire/firedtv-ci.c create mode 100644 drivers/media/firewire/firedtv-dvb.c create mode 100644 drivers/media/firewire/firedtv-fe.c create mode 100644 drivers/media/firewire/firedtv-fw.c create mode 100644 drivers/media/firewire/firedtv-rc.c create mode 100644 drivers/media/firewire/firedtv.h create mode 100644 drivers/media/i2c/Kconfig create mode 100644 drivers/media/i2c/Makefile create mode 100644 drivers/media/i2c/ad9389b.c create mode 100644 drivers/media/i2c/adp1653.c create mode 100644 drivers/media/i2c/adv7170.c create mode 100644 drivers/media/i2c/adv7175.c create mode 100644 drivers/media/i2c/adv7180.c create mode 100644 drivers/media/i2c/adv7183.c create mode 100644 drivers/media/i2c/adv7183_regs.h create mode 100644 drivers/media/i2c/adv7343.c create mode 100644 drivers/media/i2c/adv7343_regs.h create mode 100644 drivers/media/i2c/adv7393.c create mode 100644 drivers/media/i2c/adv7393_regs.h create mode 100644 drivers/media/i2c/adv7604.c create mode 100644 drivers/media/i2c/ak881x.c create mode 100644 drivers/media/i2c/aptina-pll.c create mode 100644 drivers/media/i2c/aptina-pll.h create mode 100644 drivers/media/i2c/as3645a.c create mode 100644 drivers/media/i2c/bt819.c create mode 100644 drivers/media/i2c/bt856.c create mode 100644 drivers/media/i2c/bt866.c create mode 100644 drivers/media/i2c/cs5345.c create mode 100644 drivers/media/i2c/cs53l32a.c create mode 100644 drivers/media/i2c/cx25840/Kconfig create mode 100644 drivers/media/i2c/cx25840/Makefile create mode 100644 drivers/media/i2c/cx25840/cx25840-audio.c create mode 100644 drivers/media/i2c/cx25840/cx25840-core.c create mode 100644 drivers/media/i2c/cx25840/cx25840-core.h create mode 100644 drivers/media/i2c/cx25840/cx25840-firmware.c create mode 100644 drivers/media/i2c/cx25840/cx25840-ir.c create mode 100644 drivers/media/i2c/cx25840/cx25840-vbi.c create mode 100644 drivers/media/i2c/ir-kbd-i2c.c create mode 100644 drivers/media/i2c/ks0127.c create mode 100644 drivers/media/i2c/ks0127.h create mode 100644 drivers/media/i2c/m52790.c create mode 100644 drivers/media/i2c/m5mols/Kconfig create mode 100644 drivers/media/i2c/m5mols/Makefile create mode 100644 drivers/media/i2c/m5mols/m5mols.h create mode 100644 drivers/media/i2c/m5mols/m5mols_capture.c create mode 100644 drivers/media/i2c/m5mols/m5mols_controls.c create mode 100644 drivers/media/i2c/m5mols/m5mols_core.c create mode 100644 drivers/media/i2c/m5mols/m5mols_reg.h create mode 100644 drivers/media/i2c/msp3400-driver.c create mode 100644 drivers/media/i2c/msp3400-driver.h create mode 100644 drivers/media/i2c/msp3400-kthreads.c create mode 100644 drivers/media/i2c/mt9m032.c create mode 100644 drivers/media/i2c/mt9p031.c create mode 100644 drivers/media/i2c/mt9t001.c create mode 100644 drivers/media/i2c/mt9v011.c create mode 100644 drivers/media/i2c/mt9v032.c create mode 100644 drivers/media/i2c/noon010pc30.c create mode 100644 drivers/media/i2c/ov7640.c create mode 100644 drivers/media/i2c/ov7670.c create mode 100644 drivers/media/i2c/ov9650.c create mode 100644 drivers/media/i2c/s5c73m3/Makefile create mode 100644 drivers/media/i2c/s5c73m3/s5c73m3-core.c create mode 100644 drivers/media/i2c/s5c73m3/s5c73m3-ctrls.c create mode 100644 drivers/media/i2c/s5c73m3/s5c73m3-spi.c create mode 100644 drivers/media/i2c/s5c73m3/s5c73m3.h create mode 100644 drivers/media/i2c/s5k4ecgx.c create mode 100644 drivers/media/i2c/s5k6aa.c create mode 100644 drivers/media/i2c/saa6588.c create mode 100644 drivers/media/i2c/saa7110.c create mode 100644 drivers/media/i2c/saa7115.c create mode 100644 drivers/media/i2c/saa711x_regs.h create mode 100644 drivers/media/i2c/saa7127.c create mode 100644 drivers/media/i2c/saa717x.c create mode 100644 drivers/media/i2c/saa7185.c create mode 100644 drivers/media/i2c/saa7191.c create mode 100644 drivers/media/i2c/saa7191.h create mode 100644 drivers/media/i2c/smiapp-pll.c create mode 100644 drivers/media/i2c/smiapp-pll.h create mode 100644 drivers/media/i2c/smiapp/Kconfig create mode 100644 drivers/media/i2c/smiapp/Makefile create mode 100644 drivers/media/i2c/smiapp/smiapp-core.c create mode 100644 drivers/media/i2c/smiapp/smiapp-limits.c create mode 100644 drivers/media/i2c/smiapp/smiapp-limits.h create mode 100644 drivers/media/i2c/smiapp/smiapp-quirk.c create mode 100644 drivers/media/i2c/smiapp/smiapp-quirk.h create mode 100644 drivers/media/i2c/smiapp/smiapp-reg-defs.h create mode 100644 drivers/media/i2c/smiapp/smiapp-reg.h create mode 100644 drivers/media/i2c/smiapp/smiapp-regs.c create mode 100644 drivers/media/i2c/smiapp/smiapp-regs.h create mode 100644 drivers/media/i2c/smiapp/smiapp.h create mode 100644 drivers/media/i2c/soc_camera/Kconfig create mode 100644 drivers/media/i2c/soc_camera/Makefile create mode 100644 drivers/media/i2c/soc_camera/imx074.c create mode 100644 drivers/media/i2c/soc_camera/mt9m001.c create mode 100644 drivers/media/i2c/soc_camera/mt9m111.c create mode 100644 drivers/media/i2c/soc_camera/mt9t031.c create mode 100644 drivers/media/i2c/soc_camera/mt9t112.c create mode 100644 drivers/media/i2c/soc_camera/mt9v022.c create mode 100644 drivers/media/i2c/soc_camera/ov2640.c create mode 100644 drivers/media/i2c/soc_camera/ov5642.c create mode 100644 drivers/media/i2c/soc_camera/ov6650.c create mode 100644 drivers/media/i2c/soc_camera/ov772x.c create mode 100644 drivers/media/i2c/soc_camera/ov9640.c create mode 100644 drivers/media/i2c/soc_camera/ov9640.h create mode 100644 drivers/media/i2c/soc_camera/ov9740.c create mode 100644 drivers/media/i2c/soc_camera/rj54n1cb0c.c create mode 100644 drivers/media/i2c/soc_camera/tw9910.c create mode 100644 drivers/media/i2c/sony-btf-mpx.c create mode 100644 drivers/media/i2c/sr030pc30.c create mode 100644 drivers/media/i2c/tcm825x.c create mode 100644 drivers/media/i2c/tcm825x.h create mode 100644 drivers/media/i2c/tda7432.c create mode 100644 drivers/media/i2c/tda9840.c create mode 100644 drivers/media/i2c/tea6415c.c create mode 100644 drivers/media/i2c/tea6415c.h create mode 100644 drivers/media/i2c/tea6420.c create mode 100644 drivers/media/i2c/tea6420.h create mode 100644 drivers/media/i2c/ths7303.c create mode 100644 drivers/media/i2c/tlv320aic23b.c create mode 100644 drivers/media/i2c/tvaudio.c create mode 100644 drivers/media/i2c/tvp514x.c create mode 100644 drivers/media/i2c/tvp514x_regs.h create mode 100644 drivers/media/i2c/tvp5150.c create mode 100644 drivers/media/i2c/tvp5150_reg.h create mode 100644 drivers/media/i2c/tvp7002.c create mode 100644 drivers/media/i2c/tvp7002_reg.h create mode 100644 drivers/media/i2c/tw2804.c create mode 100644 drivers/media/i2c/tw9903.c create mode 100644 drivers/media/i2c/tw9906.c create mode 100644 drivers/media/i2c/uda1342.c create mode 100644 drivers/media/i2c/upd64031a.c create mode 100644 drivers/media/i2c/upd64083.c create mode 100644 drivers/media/i2c/vp27smpx.c create mode 100644 drivers/media/i2c/vpx3220.c create mode 100644 drivers/media/i2c/vs6624.c create mode 100644 drivers/media/i2c/vs6624_regs.h create mode 100644 drivers/media/i2c/wm8739.c create mode 100644 drivers/media/i2c/wm8775.c create mode 100644 drivers/media/media-device.c create mode 100644 drivers/media/media-devnode.c create mode 100644 drivers/media/media-entity.c create mode 100644 drivers/media/mmc/Kconfig create mode 100644 drivers/media/mmc/Makefile create mode 100644 drivers/media/mmc/siano/Kconfig create mode 100644 drivers/media/mmc/siano/Makefile create mode 100644 drivers/media/mmc/siano/smssdio.c create mode 100644 drivers/media/parport/Kconfig create mode 100644 drivers/media/parport/Makefile create mode 100644 drivers/media/parport/bw-qcam.c create mode 100644 drivers/media/parport/c-qcam.c create mode 100644 drivers/media/parport/pms.c create mode 100644 drivers/media/parport/w9966.c create mode 100644 drivers/media/pci/Kconfig create mode 100644 drivers/media/pci/Makefile create mode 100644 drivers/media/pci/b2c2/Kconfig create mode 100644 drivers/media/pci/b2c2/Makefile create mode 100644 drivers/media/pci/b2c2/flexcop-dma.c create mode 100644 drivers/media/pci/b2c2/flexcop-pci.c create mode 100644 drivers/media/pci/bt8xx/Kconfig create mode 100644 drivers/media/pci/bt8xx/Makefile create mode 100644 drivers/media/pci/bt8xx/bt848.h create mode 100644 drivers/media/pci/bt8xx/bt878.c create mode 100644 drivers/media/pci/bt8xx/bt878.h create mode 100644 drivers/media/pci/bt8xx/bttv-audio-hook.c create mode 100644 drivers/media/pci/bt8xx/bttv-audio-hook.h create mode 100644 drivers/media/pci/bt8xx/bttv-cards.c create mode 100644 drivers/media/pci/bt8xx/bttv-driver.c create mode 100644 drivers/media/pci/bt8xx/bttv-gpio.c create mode 100644 drivers/media/pci/bt8xx/bttv-i2c.c create mode 100644 drivers/media/pci/bt8xx/bttv-if.c create mode 100644 drivers/media/pci/bt8xx/bttv-input.c create mode 100644 drivers/media/pci/bt8xx/bttv-risc.c create mode 100644 drivers/media/pci/bt8xx/bttv-vbi.c create mode 100644 drivers/media/pci/bt8xx/bttv.h create mode 100644 drivers/media/pci/bt8xx/bttvp.h create mode 100644 drivers/media/pci/bt8xx/dst.c create mode 100644 drivers/media/pci/bt8xx/dst_ca.c create mode 100644 drivers/media/pci/bt8xx/dst_ca.h create mode 100644 drivers/media/pci/bt8xx/dst_common.h create mode 100644 drivers/media/pci/bt8xx/dst_priv.h create mode 100644 drivers/media/pci/bt8xx/dvb-bt8xx.c create mode 100644 drivers/media/pci/bt8xx/dvb-bt8xx.h create mode 100644 drivers/media/pci/cx18/Kconfig create mode 100644 drivers/media/pci/cx18/Makefile create mode 100644 drivers/media/pci/cx18/cx18-alsa-main.c create mode 100644 drivers/media/pci/cx18/cx18-alsa-mixer.c create mode 100644 drivers/media/pci/cx18/cx18-alsa-mixer.h create mode 100644 drivers/media/pci/cx18/cx18-alsa-pcm.c create mode 100644 drivers/media/pci/cx18/cx18-alsa-pcm.h create mode 100644 drivers/media/pci/cx18/cx18-alsa.h create mode 100644 drivers/media/pci/cx18/cx18-audio.c create mode 100644 drivers/media/pci/cx18/cx18-audio.h create mode 100644 drivers/media/pci/cx18/cx18-av-audio.c create mode 100644 drivers/media/pci/cx18/cx18-av-core.c create mode 100644 drivers/media/pci/cx18/cx18-av-core.h create mode 100644 drivers/media/pci/cx18/cx18-av-firmware.c create mode 100644 drivers/media/pci/cx18/cx18-av-vbi.c create mode 100644 drivers/media/pci/cx18/cx18-cards.c create mode 100644 drivers/media/pci/cx18/cx18-cards.h create mode 100644 drivers/media/pci/cx18/cx18-controls.c create mode 100644 drivers/media/pci/cx18/cx18-controls.h create mode 100644 drivers/media/pci/cx18/cx18-driver.c create mode 100644 drivers/media/pci/cx18/cx18-driver.h create mode 100644 drivers/media/pci/cx18/cx18-dvb.c create mode 100644 drivers/media/pci/cx18/cx18-dvb.h create mode 100644 drivers/media/pci/cx18/cx18-fileops.c create mode 100644 drivers/media/pci/cx18/cx18-fileops.h create mode 100644 drivers/media/pci/cx18/cx18-firmware.c create mode 100644 drivers/media/pci/cx18/cx18-firmware.h create mode 100644 drivers/media/pci/cx18/cx18-gpio.c create mode 100644 drivers/media/pci/cx18/cx18-gpio.h create mode 100644 drivers/media/pci/cx18/cx18-i2c.c create mode 100644 drivers/media/pci/cx18/cx18-i2c.h create mode 100644 drivers/media/pci/cx18/cx18-io.c create mode 100644 drivers/media/pci/cx18/cx18-io.h create mode 100644 drivers/media/pci/cx18/cx18-ioctl.c create mode 100644 drivers/media/pci/cx18/cx18-ioctl.h create mode 100644 drivers/media/pci/cx18/cx18-irq.c create mode 100644 drivers/media/pci/cx18/cx18-irq.h create mode 100644 drivers/media/pci/cx18/cx18-mailbox.c create mode 100644 drivers/media/pci/cx18/cx18-mailbox.h create mode 100644 drivers/media/pci/cx18/cx18-queue.c create mode 100644 drivers/media/pci/cx18/cx18-queue.h create mode 100644 drivers/media/pci/cx18/cx18-scb.c create mode 100644 drivers/media/pci/cx18/cx18-scb.h create mode 100644 drivers/media/pci/cx18/cx18-streams.c create mode 100644 drivers/media/pci/cx18/cx18-streams.h create mode 100644 drivers/media/pci/cx18/cx18-vbi.c create mode 100644 drivers/media/pci/cx18/cx18-vbi.h create mode 100644 drivers/media/pci/cx18/cx18-version.h create mode 100644 drivers/media/pci/cx18/cx18-video.c create mode 100644 drivers/media/pci/cx18/cx18-video.h create mode 100644 drivers/media/pci/cx18/cx23418.h create mode 100644 drivers/media/pci/cx23885/Kconfig create mode 100644 drivers/media/pci/cx23885/Makefile create mode 100644 drivers/media/pci/cx23885/altera-ci.c create mode 100644 drivers/media/pci/cx23885/altera-ci.h create mode 100644 drivers/media/pci/cx23885/cimax2.c create mode 100644 drivers/media/pci/cx23885/cimax2.h create mode 100644 drivers/media/pci/cx23885/cx23885-417.c create mode 100644 drivers/media/pci/cx23885/cx23885-alsa.c create mode 100644 drivers/media/pci/cx23885/cx23885-av.c create mode 100644 drivers/media/pci/cx23885/cx23885-av.h create mode 100644 drivers/media/pci/cx23885/cx23885-cards.c create mode 100644 drivers/media/pci/cx23885/cx23885-core.c create mode 100644 drivers/media/pci/cx23885/cx23885-dvb.c create mode 100644 drivers/media/pci/cx23885/cx23885-f300.c create mode 100644 drivers/media/pci/cx23885/cx23885-f300.h create mode 100644 drivers/media/pci/cx23885/cx23885-i2c.c create mode 100644 drivers/media/pci/cx23885/cx23885-input.c create mode 100644 drivers/media/pci/cx23885/cx23885-input.h create mode 100644 drivers/media/pci/cx23885/cx23885-ioctl.c create mode 100644 drivers/media/pci/cx23885/cx23885-ioctl.h create mode 100644 drivers/media/pci/cx23885/cx23885-ir.c create mode 100644 drivers/media/pci/cx23885/cx23885-ir.h create mode 100644 drivers/media/pci/cx23885/cx23885-reg.h create mode 100644 drivers/media/pci/cx23885/cx23885-vbi.c create mode 100644 drivers/media/pci/cx23885/cx23885-video.c create mode 100644 drivers/media/pci/cx23885/cx23885.h create mode 100644 drivers/media/pci/cx23885/cx23888-ir.c create mode 100644 drivers/media/pci/cx23885/cx23888-ir.h create mode 100644 drivers/media/pci/cx23885/netup-eeprom.c create mode 100644 drivers/media/pci/cx23885/netup-eeprom.h create mode 100644 drivers/media/pci/cx23885/netup-init.c create mode 100644 drivers/media/pci/cx23885/netup-init.h create mode 100644 drivers/media/pci/cx25821/Kconfig create mode 100644 drivers/media/pci/cx25821/Makefile create mode 100644 drivers/media/pci/cx25821/cx25821-alsa.c create mode 100644 drivers/media/pci/cx25821/cx25821-audio-upstream.c create mode 100644 drivers/media/pci/cx25821/cx25821-audio-upstream.h create mode 100644 drivers/media/pci/cx25821/cx25821-audio.h create mode 100644 drivers/media/pci/cx25821/cx25821-biffuncs.h create mode 100644 drivers/media/pci/cx25821/cx25821-cards.c create mode 100644 drivers/media/pci/cx25821/cx25821-core.c create mode 100644 drivers/media/pci/cx25821/cx25821-gpio.c create mode 100644 drivers/media/pci/cx25821/cx25821-i2c.c create mode 100644 drivers/media/pci/cx25821/cx25821-medusa-defines.h create mode 100644 drivers/media/pci/cx25821/cx25821-medusa-reg.h create mode 100644 drivers/media/pci/cx25821/cx25821-medusa-video.c create mode 100644 drivers/media/pci/cx25821/cx25821-medusa-video.h create mode 100644 drivers/media/pci/cx25821/cx25821-reg.h create mode 100644 drivers/media/pci/cx25821/cx25821-sram.h create mode 100644 drivers/media/pci/cx25821/cx25821-video-upstream.c create mode 100644 drivers/media/pci/cx25821/cx25821-video-upstream.h create mode 100644 drivers/media/pci/cx25821/cx25821-video.c create mode 100644 drivers/media/pci/cx25821/cx25821-video.h create mode 100644 drivers/media/pci/cx25821/cx25821.h create mode 100644 drivers/media/pci/cx88/Kconfig create mode 100644 drivers/media/pci/cx88/Makefile create mode 100644 drivers/media/pci/cx88/cx88-alsa.c create mode 100644 drivers/media/pci/cx88/cx88-blackbird.c create mode 100644 drivers/media/pci/cx88/cx88-cards.c create mode 100644 drivers/media/pci/cx88/cx88-core.c create mode 100644 drivers/media/pci/cx88/cx88-dsp.c create mode 100644 drivers/media/pci/cx88/cx88-dvb.c create mode 100644 drivers/media/pci/cx88/cx88-i2c.c create mode 100644 drivers/media/pci/cx88/cx88-input.c create mode 100644 drivers/media/pci/cx88/cx88-mpeg.c create mode 100644 drivers/media/pci/cx88/cx88-reg.h create mode 100644 drivers/media/pci/cx88/cx88-tvaudio.c create mode 100644 drivers/media/pci/cx88/cx88-vbi.c create mode 100644 drivers/media/pci/cx88/cx88-video.c create mode 100644 drivers/media/pci/cx88/cx88-vp3054-i2c.c create mode 100644 drivers/media/pci/cx88/cx88-vp3054-i2c.h create mode 100644 drivers/media/pci/cx88/cx88.h create mode 100644 drivers/media/pci/ddbridge/Kconfig create mode 100644 drivers/media/pci/ddbridge/Makefile create mode 100644 drivers/media/pci/ddbridge/ddbridge-core.c create mode 100644 drivers/media/pci/ddbridge/ddbridge-regs.h create mode 100644 drivers/media/pci/ddbridge/ddbridge.h create mode 100644 drivers/media/pci/dm1105/Kconfig create mode 100644 drivers/media/pci/dm1105/Makefile create mode 100644 drivers/media/pci/dm1105/dm1105.c create mode 100644 drivers/media/pci/ivtv/Kconfig create mode 100644 drivers/media/pci/ivtv/Makefile create mode 100644 drivers/media/pci/ivtv/ivtv-alsa-main.c create mode 100644 drivers/media/pci/ivtv/ivtv-alsa-mixer.c create mode 100644 drivers/media/pci/ivtv/ivtv-alsa-mixer.h create mode 100644 drivers/media/pci/ivtv/ivtv-alsa-pcm.c create mode 100644 drivers/media/pci/ivtv/ivtv-alsa-pcm.h create mode 100644 drivers/media/pci/ivtv/ivtv-alsa.h create mode 100644 drivers/media/pci/ivtv/ivtv-cards.c create mode 100644 drivers/media/pci/ivtv/ivtv-cards.h create mode 100644 drivers/media/pci/ivtv/ivtv-controls.c create mode 100644 drivers/media/pci/ivtv/ivtv-controls.h create mode 100644 drivers/media/pci/ivtv/ivtv-driver.c create mode 100644 drivers/media/pci/ivtv/ivtv-driver.h create mode 100644 drivers/media/pci/ivtv/ivtv-fileops.c create mode 100644 drivers/media/pci/ivtv/ivtv-fileops.h create mode 100644 drivers/media/pci/ivtv/ivtv-firmware.c create mode 100644 drivers/media/pci/ivtv/ivtv-firmware.h create mode 100644 drivers/media/pci/ivtv/ivtv-gpio.c create mode 100644 drivers/media/pci/ivtv/ivtv-gpio.h create mode 100644 drivers/media/pci/ivtv/ivtv-i2c.c create mode 100644 drivers/media/pci/ivtv/ivtv-i2c.h create mode 100644 drivers/media/pci/ivtv/ivtv-ioctl.c create mode 100644 drivers/media/pci/ivtv/ivtv-ioctl.h create mode 100644 drivers/media/pci/ivtv/ivtv-irq.c create mode 100644 drivers/media/pci/ivtv/ivtv-irq.h create mode 100644 drivers/media/pci/ivtv/ivtv-mailbox.c create mode 100644 drivers/media/pci/ivtv/ivtv-mailbox.h create mode 100644 drivers/media/pci/ivtv/ivtv-queue.c create mode 100644 drivers/media/pci/ivtv/ivtv-queue.h create mode 100644 drivers/media/pci/ivtv/ivtv-routing.c create mode 100644 drivers/media/pci/ivtv/ivtv-routing.h create mode 100644 drivers/media/pci/ivtv/ivtv-streams.c create mode 100644 drivers/media/pci/ivtv/ivtv-streams.h create mode 100644 drivers/media/pci/ivtv/ivtv-udma.c create mode 100644 drivers/media/pci/ivtv/ivtv-udma.h create mode 100644 drivers/media/pci/ivtv/ivtv-vbi.c create mode 100644 drivers/media/pci/ivtv/ivtv-vbi.h create mode 100644 drivers/media/pci/ivtv/ivtv-version.h create mode 100644 drivers/media/pci/ivtv/ivtv-yuv.c create mode 100644 drivers/media/pci/ivtv/ivtv-yuv.h create mode 100644 drivers/media/pci/ivtv/ivtvfb.c create mode 100644 drivers/media/pci/mantis/Kconfig create mode 100644 drivers/media/pci/mantis/Makefile create mode 100644 drivers/media/pci/mantis/hopper_cards.c create mode 100644 drivers/media/pci/mantis/hopper_vp3028.c create mode 100644 drivers/media/pci/mantis/hopper_vp3028.h create mode 100644 drivers/media/pci/mantis/mantis_ca.c create mode 100644 drivers/media/pci/mantis/mantis_ca.h create mode 100644 drivers/media/pci/mantis/mantis_cards.c create mode 100644 drivers/media/pci/mantis/mantis_common.h create mode 100644 drivers/media/pci/mantis/mantis_core.c create mode 100644 drivers/media/pci/mantis/mantis_core.h create mode 100644 drivers/media/pci/mantis/mantis_dma.c create mode 100644 drivers/media/pci/mantis/mantis_dma.h create mode 100644 drivers/media/pci/mantis/mantis_dvb.c create mode 100644 drivers/media/pci/mantis/mantis_dvb.h create mode 100644 drivers/media/pci/mantis/mantis_evm.c create mode 100644 drivers/media/pci/mantis/mantis_hif.c create mode 100644 drivers/media/pci/mantis/mantis_hif.h create mode 100644 drivers/media/pci/mantis/mantis_i2c.c create mode 100644 drivers/media/pci/mantis/mantis_i2c.h create mode 100644 drivers/media/pci/mantis/mantis_input.c create mode 100644 drivers/media/pci/mantis/mantis_ioc.c create mode 100644 drivers/media/pci/mantis/mantis_ioc.h create mode 100644 drivers/media/pci/mantis/mantis_link.h create mode 100644 drivers/media/pci/mantis/mantis_pci.c create mode 100644 drivers/media/pci/mantis/mantis_pci.h create mode 100644 drivers/media/pci/mantis/mantis_pcmcia.c create mode 100644 drivers/media/pci/mantis/mantis_reg.h create mode 100644 drivers/media/pci/mantis/mantis_uart.c create mode 100644 drivers/media/pci/mantis/mantis_uart.h create mode 100644 drivers/media/pci/mantis/mantis_vp1033.c create mode 100644 drivers/media/pci/mantis/mantis_vp1033.h create mode 100644 drivers/media/pci/mantis/mantis_vp1034.c create mode 100644 drivers/media/pci/mantis/mantis_vp1034.h create mode 100644 drivers/media/pci/mantis/mantis_vp1041.c create mode 100644 drivers/media/pci/mantis/mantis_vp1041.h create mode 100644 drivers/media/pci/mantis/mantis_vp2033.c create mode 100644 drivers/media/pci/mantis/mantis_vp2033.h create mode 100644 drivers/media/pci/mantis/mantis_vp2040.c create mode 100644 drivers/media/pci/mantis/mantis_vp2040.h create mode 100644 drivers/media/pci/mantis/mantis_vp3028.c create mode 100644 drivers/media/pci/mantis/mantis_vp3028.h create mode 100644 drivers/media/pci/mantis/mantis_vp3030.c create mode 100644 drivers/media/pci/mantis/mantis_vp3030.h create mode 100644 drivers/media/pci/meye/Kconfig create mode 100644 drivers/media/pci/meye/Makefile create mode 100644 drivers/media/pci/meye/meye.c create mode 100644 drivers/media/pci/meye/meye.h create mode 100644 drivers/media/pci/ngene/Kconfig create mode 100644 drivers/media/pci/ngene/Makefile create mode 100644 drivers/media/pci/ngene/ngene-cards.c create mode 100644 drivers/media/pci/ngene/ngene-core.c create mode 100644 drivers/media/pci/ngene/ngene-dvb.c create mode 100644 drivers/media/pci/ngene/ngene-i2c.c create mode 100644 drivers/media/pci/ngene/ngene.h create mode 100644 drivers/media/pci/pluto2/Kconfig create mode 100644 drivers/media/pci/pluto2/Makefile create mode 100644 drivers/media/pci/pluto2/pluto2.c create mode 100644 drivers/media/pci/pt1/Kconfig create mode 100644 drivers/media/pci/pt1/Makefile create mode 100644 drivers/media/pci/pt1/pt1.c create mode 100644 drivers/media/pci/pt1/va1j5jf8007s.c create mode 100644 drivers/media/pci/pt1/va1j5jf8007s.h create mode 100644 drivers/media/pci/pt1/va1j5jf8007t.c create mode 100644 drivers/media/pci/pt1/va1j5jf8007t.h create mode 100644 drivers/media/pci/saa7134/Kconfig create mode 100644 drivers/media/pci/saa7134/Makefile create mode 100644 drivers/media/pci/saa7134/saa6752hs.c create mode 100644 drivers/media/pci/saa7134/saa7134-alsa.c create mode 100644 drivers/media/pci/saa7134/saa7134-cards.c create mode 100644 drivers/media/pci/saa7134/saa7134-core.c create mode 100644 drivers/media/pci/saa7134/saa7134-dvb.c create mode 100644 drivers/media/pci/saa7134/saa7134-empress.c create mode 100644 drivers/media/pci/saa7134/saa7134-i2c.c create mode 100644 drivers/media/pci/saa7134/saa7134-input.c create mode 100644 drivers/media/pci/saa7134/saa7134-reg.h create mode 100644 drivers/media/pci/saa7134/saa7134-ts.c create mode 100644 drivers/media/pci/saa7134/saa7134-tvaudio.c create mode 100644 drivers/media/pci/saa7134/saa7134-vbi.c create mode 100644 drivers/media/pci/saa7134/saa7134-video.c create mode 100644 drivers/media/pci/saa7134/saa7134.h create mode 100644 drivers/media/pci/saa7146/Kconfig create mode 100644 drivers/media/pci/saa7146/Makefile create mode 100644 drivers/media/pci/saa7146/hexium_gemini.c create mode 100644 drivers/media/pci/saa7146/hexium_orion.c create mode 100644 drivers/media/pci/saa7146/mxb.c create mode 100644 drivers/media/pci/saa7164/Kconfig create mode 100644 drivers/media/pci/saa7164/Makefile create mode 100644 drivers/media/pci/saa7164/saa7164-api.c create mode 100644 drivers/media/pci/saa7164/saa7164-buffer.c create mode 100644 drivers/media/pci/saa7164/saa7164-bus.c create mode 100644 drivers/media/pci/saa7164/saa7164-cards.c create mode 100644 drivers/media/pci/saa7164/saa7164-cmd.c create mode 100644 drivers/media/pci/saa7164/saa7164-core.c create mode 100644 drivers/media/pci/saa7164/saa7164-dvb.c create mode 100644 drivers/media/pci/saa7164/saa7164-encoder.c create mode 100644 drivers/media/pci/saa7164/saa7164-fw.c create mode 100644 drivers/media/pci/saa7164/saa7164-i2c.c create mode 100644 drivers/media/pci/saa7164/saa7164-reg.h create mode 100644 drivers/media/pci/saa7164/saa7164-types.h create mode 100644 drivers/media/pci/saa7164/saa7164-vbi.c create mode 100644 drivers/media/pci/saa7164/saa7164.h create mode 100644 drivers/media/pci/sta2x11/Kconfig create mode 100644 drivers/media/pci/sta2x11/Makefile create mode 100644 drivers/media/pci/sta2x11/sta2x11_vip.c create mode 100644 drivers/media/pci/sta2x11/sta2x11_vip.h create mode 100644 drivers/media/pci/ttpci/Kconfig create mode 100644 drivers/media/pci/ttpci/Makefile create mode 100644 drivers/media/pci/ttpci/av7110.c create mode 100644 drivers/media/pci/ttpci/av7110.h create mode 100644 drivers/media/pci/ttpci/av7110_av.c create mode 100644 drivers/media/pci/ttpci/av7110_av.h create mode 100644 drivers/media/pci/ttpci/av7110_ca.c create mode 100644 drivers/media/pci/ttpci/av7110_ca.h create mode 100644 drivers/media/pci/ttpci/av7110_hw.c create mode 100644 drivers/media/pci/ttpci/av7110_hw.h create mode 100644 drivers/media/pci/ttpci/av7110_ipack.c create mode 100644 drivers/media/pci/ttpci/av7110_ipack.h create mode 100644 drivers/media/pci/ttpci/av7110_ir.c create mode 100644 drivers/media/pci/ttpci/av7110_v4l.c create mode 100644 drivers/media/pci/ttpci/budget-av.c create mode 100644 drivers/media/pci/ttpci/budget-ci.c create mode 100644 drivers/media/pci/ttpci/budget-core.c create mode 100644 drivers/media/pci/ttpci/budget-patch.c create mode 100644 drivers/media/pci/ttpci/budget.c create mode 100644 drivers/media/pci/ttpci/budget.h create mode 100644 drivers/media/pci/ttpci/ttpci-eeprom.c create mode 100644 drivers/media/pci/ttpci/ttpci-eeprom.h create mode 100644 drivers/media/pci/zoran/Kconfig create mode 100644 drivers/media/pci/zoran/Makefile create mode 100644 drivers/media/pci/zoran/videocodec.c create mode 100644 drivers/media/pci/zoran/videocodec.h create mode 100644 drivers/media/pci/zoran/zoran.h create mode 100644 drivers/media/pci/zoran/zoran_card.c create mode 100644 drivers/media/pci/zoran/zoran_card.h create mode 100644 drivers/media/pci/zoran/zoran_device.c create mode 100644 drivers/media/pci/zoran/zoran_device.h create mode 100644 drivers/media/pci/zoran/zoran_driver.c create mode 100644 drivers/media/pci/zoran/zoran_procfs.c create mode 100644 drivers/media/pci/zoran/zoran_procfs.h create mode 100644 drivers/media/pci/zoran/zr36016.c create mode 100644 drivers/media/pci/zoran/zr36016.h create mode 100644 drivers/media/pci/zoran/zr36050.c create mode 100644 drivers/media/pci/zoran/zr36050.h create mode 100644 drivers/media/pci/zoran/zr36057.h create mode 100644 drivers/media/pci/zoran/zr36060.c create mode 100644 drivers/media/pci/zoran/zr36060.h create mode 100644 drivers/media/platform/Kconfig create mode 100644 drivers/media/platform/Makefile create mode 100644 drivers/media/platform/arv.c create mode 100644 drivers/media/platform/blackfin/Kconfig create mode 100644 drivers/media/platform/blackfin/Makefile create mode 100644 drivers/media/platform/blackfin/bfin_capture.c create mode 100644 drivers/media/platform/blackfin/ppi.c create mode 100644 drivers/media/platform/coda.c create mode 100644 drivers/media/platform/coda.h create mode 100644 drivers/media/platform/davinci/Kconfig create mode 100644 drivers/media/platform/davinci/Makefile create mode 100644 drivers/media/platform/davinci/ccdc_hw_device.h create mode 100644 drivers/media/platform/davinci/dm355_ccdc.c create mode 100644 drivers/media/platform/davinci/dm355_ccdc_regs.h create mode 100644 drivers/media/platform/davinci/dm644x_ccdc.c create mode 100644 drivers/media/platform/davinci/dm644x_ccdc_regs.h create mode 100644 drivers/media/platform/davinci/isif.c create mode 100644 drivers/media/platform/davinci/isif_regs.h create mode 100644 drivers/media/platform/davinci/vpbe.c create mode 100644 drivers/media/platform/davinci/vpbe_display.c create mode 100644 drivers/media/platform/davinci/vpbe_osd.c create mode 100644 drivers/media/platform/davinci/vpbe_osd_regs.h create mode 100644 drivers/media/platform/davinci/vpbe_venc.c create mode 100644 drivers/media/platform/davinci/vpbe_venc_regs.h create mode 100644 drivers/media/platform/davinci/vpfe_capture.c create mode 100644 drivers/media/platform/davinci/vpif.c create mode 100644 drivers/media/platform/davinci/vpif.h create mode 100644 drivers/media/platform/davinci/vpif_capture.c create mode 100644 drivers/media/platform/davinci/vpif_capture.h create mode 100644 drivers/media/platform/davinci/vpif_display.c create mode 100644 drivers/media/platform/davinci/vpif_display.h create mode 100644 drivers/media/platform/davinci/vpss.c create mode 100644 drivers/media/platform/exynos-gsc/Makefile create mode 100644 drivers/media/platform/exynos-gsc/gsc-core.c create mode 100644 drivers/media/platform/exynos-gsc/gsc-core.h create mode 100644 drivers/media/platform/exynos-gsc/gsc-m2m.c create mode 100644 drivers/media/platform/exynos-gsc/gsc-regs.c create mode 100644 drivers/media/platform/exynos-gsc/gsc-regs.h create mode 100644 drivers/media/platform/exynos4-is/Kconfig create mode 100644 drivers/media/platform/exynos4-is/Makefile create mode 100644 drivers/media/platform/exynos4-is/fimc-capture.c create mode 100644 drivers/media/platform/exynos4-is/fimc-core.c create mode 100644 drivers/media/platform/exynos4-is/fimc-core.h create mode 100644 drivers/media/platform/exynos4-is/fimc-is-command.h create mode 100644 drivers/media/platform/exynos4-is/fimc-is-errno.c create mode 100644 drivers/media/platform/exynos4-is/fimc-is-errno.h create mode 100644 drivers/media/platform/exynos4-is/fimc-is-i2c.c create mode 100644 drivers/media/platform/exynos4-is/fimc-is-i2c.h create mode 100644 drivers/media/platform/exynos4-is/fimc-is-param.c create mode 100644 drivers/media/platform/exynos4-is/fimc-is-param.h create mode 100644 drivers/media/platform/exynos4-is/fimc-is-regs.c create mode 100644 drivers/media/platform/exynos4-is/fimc-is-regs.h create mode 100644 drivers/media/platform/exynos4-is/fimc-is-sensor.c create mode 100644 drivers/media/platform/exynos4-is/fimc-is-sensor.h create mode 100644 drivers/media/platform/exynos4-is/fimc-is.c create mode 100644 drivers/media/platform/exynos4-is/fimc-is.h create mode 100644 drivers/media/platform/exynos4-is/fimc-isp.c create mode 100644 drivers/media/platform/exynos4-is/fimc-isp.h create mode 100644 drivers/media/platform/exynos4-is/fimc-lite-reg.c create mode 100644 drivers/media/platform/exynos4-is/fimc-lite-reg.h create mode 100644 drivers/media/platform/exynos4-is/fimc-lite.c create mode 100644 drivers/media/platform/exynos4-is/fimc-lite.h create mode 100644 drivers/media/platform/exynos4-is/fimc-m2m.c create mode 100644 drivers/media/platform/exynos4-is/fimc-reg.c create mode 100644 drivers/media/platform/exynos4-is/fimc-reg.h create mode 100644 drivers/media/platform/exynos4-is/media-dev.c create mode 100644 drivers/media/platform/exynos4-is/media-dev.h create mode 100644 drivers/media/platform/exynos4-is/mipi-csis.c create mode 100644 drivers/media/platform/exynos4-is/mipi-csis.h create mode 100644 drivers/media/platform/fsl-viu.c create mode 100644 drivers/media/platform/indycam.c create mode 100644 drivers/media/platform/indycam.h create mode 100644 drivers/media/platform/m2m-deinterlace.c create mode 100644 drivers/media/platform/marvell-ccic/Kconfig create mode 100644 drivers/media/platform/marvell-ccic/Makefile create mode 100644 drivers/media/platform/marvell-ccic/cafe-driver.c create mode 100644 drivers/media/platform/marvell-ccic/mcam-core.c create mode 100644 drivers/media/platform/marvell-ccic/mcam-core.h create mode 100644 drivers/media/platform/marvell-ccic/mmp-driver.c create mode 100644 drivers/media/platform/mem2mem_testdev.c create mode 100644 drivers/media/platform/mx2_emmaprp.c create mode 100644 drivers/media/platform/omap/Kconfig create mode 100644 drivers/media/platform/omap/Makefile create mode 100644 drivers/media/platform/omap/omap_vout.c create mode 100644 drivers/media/platform/omap/omap_vout_vrfb.c create mode 100644 drivers/media/platform/omap/omap_vout_vrfb.h create mode 100644 drivers/media/platform/omap/omap_voutdef.h create mode 100644 drivers/media/platform/omap/omap_voutlib.c create mode 100644 drivers/media/platform/omap/omap_voutlib.h create mode 100644 drivers/media/platform/omap24xxcam-dma.c create mode 100644 drivers/media/platform/omap24xxcam.c create mode 100644 drivers/media/platform/omap24xxcam.h create mode 100644 drivers/media/platform/omap3isp/Makefile create mode 100644 drivers/media/platform/omap3isp/cfa_coef_table.h create mode 100644 drivers/media/platform/omap3isp/gamma_table.h create mode 100644 drivers/media/platform/omap3isp/isp.c create mode 100644 drivers/media/platform/omap3isp/isp.h create mode 100644 drivers/media/platform/omap3isp/ispccdc.c create mode 100644 drivers/media/platform/omap3isp/ispccdc.h create mode 100644 drivers/media/platform/omap3isp/ispccp2.c create mode 100644 drivers/media/platform/omap3isp/ispccp2.h create mode 100644 drivers/media/platform/omap3isp/ispcsi2.c create mode 100644 drivers/media/platform/omap3isp/ispcsi2.h create mode 100644 drivers/media/platform/omap3isp/ispcsiphy.c create mode 100644 drivers/media/platform/omap3isp/ispcsiphy.h create mode 100644 drivers/media/platform/omap3isp/isph3a.h create mode 100644 drivers/media/platform/omap3isp/isph3a_aewb.c create mode 100644 drivers/media/platform/omap3isp/isph3a_af.c create mode 100644 drivers/media/platform/omap3isp/isphist.c create mode 100644 drivers/media/platform/omap3isp/isphist.h create mode 100644 drivers/media/platform/omap3isp/isppreview.c create mode 100644 drivers/media/platform/omap3isp/isppreview.h create mode 100644 drivers/media/platform/omap3isp/ispqueue.c create mode 100644 drivers/media/platform/omap3isp/ispqueue.h create mode 100644 drivers/media/platform/omap3isp/ispreg.h create mode 100644 drivers/media/platform/omap3isp/ispresizer.c create mode 100644 drivers/media/platform/omap3isp/ispresizer.h create mode 100644 drivers/media/platform/omap3isp/ispstat.c create mode 100644 drivers/media/platform/omap3isp/ispstat.h create mode 100644 drivers/media/platform/omap3isp/ispvideo.c create mode 100644 drivers/media/platform/omap3isp/ispvideo.h create mode 100644 drivers/media/platform/omap3isp/luma_enhance_table.h create mode 100644 drivers/media/platform/omap3isp/noise_filter_table.h create mode 100644 drivers/media/platform/s3c-camif/Makefile create mode 100644 drivers/media/platform/s3c-camif/camif-capture.c create mode 100644 drivers/media/platform/s3c-camif/camif-core.c create mode 100644 drivers/media/platform/s3c-camif/camif-core.h create mode 100644 drivers/media/platform/s3c-camif/camif-regs.c create mode 100644 drivers/media/platform/s3c-camif/camif-regs.h create mode 100644 drivers/media/platform/s5p-g2d/Makefile create mode 100644 drivers/media/platform/s5p-g2d/g2d-hw.c create mode 100644 drivers/media/platform/s5p-g2d/g2d-regs.h create mode 100644 drivers/media/platform/s5p-g2d/g2d.c create mode 100644 drivers/media/platform/s5p-g2d/g2d.h create mode 100644 drivers/media/platform/s5p-jpeg/Makefile create mode 100644 drivers/media/platform/s5p-jpeg/jpeg-core.c create mode 100644 drivers/media/platform/s5p-jpeg/jpeg-core.h create mode 100644 drivers/media/platform/s5p-jpeg/jpeg-hw.h create mode 100644 drivers/media/platform/s5p-jpeg/jpeg-regs.h create mode 100644 drivers/media/platform/s5p-mfc/Makefile create mode 100644 drivers/media/platform/s5p-mfc/regs-mfc-v6.h create mode 100644 drivers/media/platform/s5p-mfc/regs-mfc.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_cmd.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_cmd.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_common.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_debug.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_dec.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_dec.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_enc.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_enc.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_intr.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_intr.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_opr.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_opr.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_pm.h create mode 100644 drivers/media/platform/s5p-tv/Kconfig create mode 100644 drivers/media/platform/s5p-tv/Makefile create mode 100644 drivers/media/platform/s5p-tv/hdmi_drv.c create mode 100644 drivers/media/platform/s5p-tv/hdmiphy_drv.c create mode 100644 drivers/media/platform/s5p-tv/mixer.h create mode 100644 drivers/media/platform/s5p-tv/mixer_drv.c create mode 100644 drivers/media/platform/s5p-tv/mixer_grp_layer.c create mode 100644 drivers/media/platform/s5p-tv/mixer_reg.c create mode 100644 drivers/media/platform/s5p-tv/mixer_video.c create mode 100644 drivers/media/platform/s5p-tv/mixer_vp_layer.c create mode 100644 drivers/media/platform/s5p-tv/regs-hdmi.h create mode 100644 drivers/media/platform/s5p-tv/regs-mixer.h create mode 100644 drivers/media/platform/s5p-tv/regs-sdo.h create mode 100644 drivers/media/platform/s5p-tv/regs-vp.h create mode 100644 drivers/media/platform/s5p-tv/sdo_drv.c create mode 100644 drivers/media/platform/s5p-tv/sii9234_drv.c create mode 100644 drivers/media/platform/sh_veu.c create mode 100644 drivers/media/platform/sh_vou.c create mode 100644 drivers/media/platform/soc_camera/Kconfig create mode 100644 drivers/media/platform/soc_camera/Makefile create mode 100644 drivers/media/platform/soc_camera/atmel-isi.c create mode 100644 drivers/media/platform/soc_camera/mx1_camera.c create mode 100644 drivers/media/platform/soc_camera/mx2_camera.c create mode 100644 drivers/media/platform/soc_camera/mx3_camera.c create mode 100644 drivers/media/platform/soc_camera/omap1_camera.c create mode 100644 drivers/media/platform/soc_camera/pxa_camera.c create mode 100644 drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c create mode 100644 drivers/media/platform/soc_camera/sh_mobile_csi2.c create mode 100644 drivers/media/platform/soc_camera/soc_camera.c create mode 100644 drivers/media/platform/soc_camera/soc_camera_platform.c create mode 100644 drivers/media/platform/soc_camera/soc_mediabus.c create mode 100644 drivers/media/platform/timblogiw.c create mode 100644 drivers/media/platform/via-camera.c create mode 100644 drivers/media/platform/via-camera.h create mode 100644 drivers/media/platform/vino.c create mode 100644 drivers/media/platform/vino.h create mode 100644 drivers/media/platform/vivi.c create mode 100644 drivers/media/radio/Kconfig create mode 100644 drivers/media/radio/Makefile create mode 100644 drivers/media/radio/dsbr100.c create mode 100644 drivers/media/radio/lm7000.h create mode 100644 drivers/media/radio/radio-aimslab.c create mode 100644 drivers/media/radio/radio-aztech.c create mode 100644 drivers/media/radio/radio-cadet.c create mode 100644 drivers/media/radio/radio-gemtek.c create mode 100644 drivers/media/radio/radio-isa.c create mode 100644 drivers/media/radio/radio-isa.h create mode 100644 drivers/media/radio/radio-keene.c create mode 100644 drivers/media/radio/radio-ma901.c create mode 100644 drivers/media/radio/radio-maxiradio.c create mode 100644 drivers/media/radio/radio-miropcm20.c create mode 100644 drivers/media/radio/radio-mr800.c create mode 100644 drivers/media/radio/radio-rtrack2.c create mode 100644 drivers/media/radio/radio-sf16fmi.c create mode 100644 drivers/media/radio/radio-sf16fmr2.c create mode 100644 drivers/media/radio/radio-shark.c create mode 100644 drivers/media/radio/radio-shark2.c create mode 100644 drivers/media/radio/radio-si4713.c create mode 100644 drivers/media/radio/radio-si476x.c create mode 100644 drivers/media/radio/radio-tea5764.c create mode 100644 drivers/media/radio/radio-tea5777.c create mode 100644 drivers/media/radio/radio-tea5777.h create mode 100644 drivers/media/radio/radio-terratec.c create mode 100644 drivers/media/radio/radio-timb.c create mode 100644 drivers/media/radio/radio-trust.c create mode 100644 drivers/media/radio/radio-typhoon.c create mode 100644 drivers/media/radio/radio-wl1273.c create mode 100644 drivers/media/radio/radio-zoltrix.c create mode 100644 drivers/media/radio/saa7706h.c create mode 100644 drivers/media/radio/si470x/Kconfig create mode 100644 drivers/media/radio/si470x/Makefile create mode 100644 drivers/media/radio/si470x/radio-si470x-common.c create mode 100644 drivers/media/radio/si470x/radio-si470x-i2c.c create mode 100644 drivers/media/radio/si470x/radio-si470x-usb.c create mode 100644 drivers/media/radio/si470x/radio-si470x.h create mode 100644 drivers/media/radio/si4713-i2c.c create mode 100644 drivers/media/radio/si4713-i2c.h create mode 100644 drivers/media/radio/tef6862.c create mode 100644 drivers/media/radio/wl128x/Kconfig create mode 100644 drivers/media/radio/wl128x/Makefile create mode 100644 drivers/media/radio/wl128x/fmdrv.h create mode 100644 drivers/media/radio/wl128x/fmdrv_common.c create mode 100644 drivers/media/radio/wl128x/fmdrv_common.h create mode 100644 drivers/media/radio/wl128x/fmdrv_rx.c create mode 100644 drivers/media/radio/wl128x/fmdrv_rx.h create mode 100644 drivers/media/radio/wl128x/fmdrv_tx.c create mode 100644 drivers/media/radio/wl128x/fmdrv_tx.h create mode 100644 drivers/media/radio/wl128x/fmdrv_v4l2.c create mode 100644 drivers/media/radio/wl128x/fmdrv_v4l2.h create mode 100644 drivers/media/rc/Kconfig create mode 100644 drivers/media/rc/Makefile create mode 100644 drivers/media/rc/ati_remote.c create mode 100644 drivers/media/rc/ene_ir.c create mode 100644 drivers/media/rc/ene_ir.h create mode 100644 drivers/media/rc/fintek-cir.c create mode 100644 drivers/media/rc/fintek-cir.h create mode 100644 drivers/media/rc/gpio-ir-recv.c create mode 100644 drivers/media/rc/iguanair.c create mode 100644 drivers/media/rc/imon.c create mode 100644 drivers/media/rc/ir-jvc-decoder.c create mode 100644 drivers/media/rc/ir-lirc-codec.c create mode 100644 drivers/media/rc/ir-mce_kbd-decoder.c create mode 100644 drivers/media/rc/ir-nec-decoder.c create mode 100644 drivers/media/rc/ir-raw.c create mode 100644 drivers/media/rc/ir-rc5-decoder.c create mode 100644 drivers/media/rc/ir-rc5-sz-decoder.c create mode 100644 drivers/media/rc/ir-rc6-decoder.c create mode 100644 drivers/media/rc/ir-rx51.c create mode 100644 drivers/media/rc/ir-sanyo-decoder.c create mode 100644 drivers/media/rc/ir-sony-decoder.c create mode 100644 drivers/media/rc/ite-cir.c create mode 100644 drivers/media/rc/ite-cir.h create mode 100644 drivers/media/rc/keymaps/Kconfig create mode 100644 drivers/media/rc/keymaps/Makefile create mode 100644 drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c create mode 100644 drivers/media/rc/keymaps/rc-alink-dtu-m.c create mode 100644 drivers/media/rc/keymaps/rc-anysee.c create mode 100644 drivers/media/rc/keymaps/rc-apac-viewcomp.c create mode 100644 drivers/media/rc/keymaps/rc-asus-pc39.c create mode 100644 drivers/media/rc/keymaps/rc-asus-ps3-100.c create mode 100644 drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c create mode 100644 drivers/media/rc/keymaps/rc-ati-x10.c create mode 100644 drivers/media/rc/keymaps/rc-avermedia-a16d.c create mode 100644 drivers/media/rc/keymaps/rc-avermedia-cardbus.c create mode 100644 drivers/media/rc/keymaps/rc-avermedia-dvbt.c create mode 100644 drivers/media/rc/keymaps/rc-avermedia-m135a.c create mode 100644 drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c create mode 100644 drivers/media/rc/keymaps/rc-avermedia-rm-ks.c create mode 100644 drivers/media/rc/keymaps/rc-avermedia.c create mode 100644 drivers/media/rc/keymaps/rc-avertv-303.c create mode 100644 drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c create mode 100644 drivers/media/rc/keymaps/rc-behold-columbus.c create mode 100644 drivers/media/rc/keymaps/rc-behold.c create mode 100644 drivers/media/rc/keymaps/rc-budget-ci-old.c create mode 100644 drivers/media/rc/keymaps/rc-cinergy-1400.c create mode 100644 drivers/media/rc/keymaps/rc-cinergy.c create mode 100644 drivers/media/rc/keymaps/rc-dib0700-nec.c create mode 100644 drivers/media/rc/keymaps/rc-dib0700-rc5.c create mode 100644 drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c create mode 100644 drivers/media/rc/keymaps/rc-digittrade.c create mode 100644 drivers/media/rc/keymaps/rc-dm1105-nec.c create mode 100644 drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c create mode 100644 drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c create mode 100644 drivers/media/rc/keymaps/rc-em-terratec.c create mode 100644 drivers/media/rc/keymaps/rc-encore-enltv-fm53.c create mode 100644 drivers/media/rc/keymaps/rc-encore-enltv.c create mode 100644 drivers/media/rc/keymaps/rc-encore-enltv2.c create mode 100644 drivers/media/rc/keymaps/rc-evga-indtube.c create mode 100644 drivers/media/rc/keymaps/rc-eztv.c create mode 100644 drivers/media/rc/keymaps/rc-flydvb.c create mode 100644 drivers/media/rc/keymaps/rc-flyvideo.c create mode 100644 drivers/media/rc/keymaps/rc-fusionhdtv-mce.c create mode 100644 drivers/media/rc/keymaps/rc-gadmei-rm008z.c create mode 100644 drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c create mode 100644 drivers/media/rc/keymaps/rc-gotview7135.c create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c create mode 100644 drivers/media/rc/keymaps/rc-imon-mce.c create mode 100644 drivers/media/rc/keymaps/rc-imon-pad.c create mode 100644 drivers/media/rc/keymaps/rc-iodata-bctv7e.c create mode 100644 drivers/media/rc/keymaps/rc-it913x-v1.c create mode 100644 drivers/media/rc/keymaps/rc-it913x-v2.c create mode 100644 drivers/media/rc/keymaps/rc-kaiomy.c create mode 100644 drivers/media/rc/keymaps/rc-kworld-315u.c create mode 100644 drivers/media/rc/keymaps/rc-kworld-pc150u.c create mode 100644 drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c create mode 100644 drivers/media/rc/keymaps/rc-leadtek-y04g0051.c create mode 100644 drivers/media/rc/keymaps/rc-lirc.c create mode 100644 drivers/media/rc/keymaps/rc-lme2510.c create mode 100644 drivers/media/rc/keymaps/rc-manli.c create mode 100644 drivers/media/rc/keymaps/rc-medion-x10-digitainer.c create mode 100644 drivers/media/rc/keymaps/rc-medion-x10-or2x.c create mode 100644 drivers/media/rc/keymaps/rc-medion-x10.c create mode 100644 drivers/media/rc/keymaps/rc-msi-digivox-ii.c create mode 100644 drivers/media/rc/keymaps/rc-msi-digivox-iii.c create mode 100644 drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c create mode 100644 drivers/media/rc/keymaps/rc-msi-tvanywhere.c create mode 100644 drivers/media/rc/keymaps/rc-nebula.c create mode 100644 drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c create mode 100644 drivers/media/rc/keymaps/rc-norwood.c create mode 100644 drivers/media/rc/keymaps/rc-npgtech.c create mode 100644 drivers/media/rc/keymaps/rc-pctv-sedna.c create mode 100644 drivers/media/rc/keymaps/rc-pinnacle-color.c create mode 100644 drivers/media/rc/keymaps/rc-pinnacle-grey.c create mode 100644 drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c create mode 100644 drivers/media/rc/keymaps/rc-pixelview-002t.c create mode 100644 drivers/media/rc/keymaps/rc-pixelview-mk12.c create mode 100644 drivers/media/rc/keymaps/rc-pixelview-new.c create mode 100644 drivers/media/rc/keymaps/rc-pixelview.c create mode 100644 drivers/media/rc/keymaps/rc-powercolor-real-angel.c create mode 100644 drivers/media/rc/keymaps/rc-proteus-2309.c create mode 100644 drivers/media/rc/keymaps/rc-purpletv.c create mode 100644 drivers/media/rc/keymaps/rc-pv951.c create mode 100644 drivers/media/rc/keymaps/rc-rc6-mce.c create mode 100644 drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c create mode 100644 drivers/media/rc/keymaps/rc-reddo.c create mode 100644 drivers/media/rc/keymaps/rc-snapstream-firefly.c create mode 100644 drivers/media/rc/keymaps/rc-streamzap.c create mode 100644 drivers/media/rc/keymaps/rc-tbs-nec.c create mode 100644 drivers/media/rc/keymaps/rc-technisat-usb2.c create mode 100644 drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c create mode 100644 drivers/media/rc/keymaps/rc-terratec-slim-2.c create mode 100644 drivers/media/rc/keymaps/rc-terratec-slim.c create mode 100644 drivers/media/rc/keymaps/rc-tevii-nec.c create mode 100644 drivers/media/rc/keymaps/rc-tivo.c create mode 100644 drivers/media/rc/keymaps/rc-total-media-in-hand-02.c create mode 100644 drivers/media/rc/keymaps/rc-total-media-in-hand.c create mode 100644 drivers/media/rc/keymaps/rc-trekstor.c create mode 100644 drivers/media/rc/keymaps/rc-tt-1500.c create mode 100644 drivers/media/rc/keymaps/rc-twinhan1027.c create mode 100644 drivers/media/rc/keymaps/rc-videomate-m1f.c create mode 100644 drivers/media/rc/keymaps/rc-videomate-s350.c create mode 100644 drivers/media/rc/keymaps/rc-videomate-tv-pvr.c create mode 100644 drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c create mode 100644 drivers/media/rc/keymaps/rc-winfast.c create mode 100644 drivers/media/rc/lirc_dev.c create mode 100644 drivers/media/rc/mceusb.c create mode 100644 drivers/media/rc/nuvoton-cir.c create mode 100644 drivers/media/rc/nuvoton-cir.h create mode 100644 drivers/media/rc/rc-core-priv.h create mode 100644 drivers/media/rc/rc-loopback.c create mode 100644 drivers/media/rc/rc-main.c create mode 100644 drivers/media/rc/redrat3.c create mode 100644 drivers/media/rc/streamzap.c create mode 100644 drivers/media/rc/ttusbir.c create mode 100644 drivers/media/rc/winbond-cir.c create mode 100644 drivers/media/sprd_dcam/Kconfig create mode 100755 drivers/media/sprd_dcam/Makefile create mode 100644 drivers/media/sprd_dcam/common/Makefile.inc create mode 100755 drivers/media/sprd_dcam/common/dcam_img.c create mode 100644 drivers/media/sprd_dcam/common/flash_test.c create mode 100644 drivers/media/sprd_dcam/common/flash_test.h create mode 100644 drivers/media/sprd_dcam/common/gen_scale_coef.c create mode 100644 drivers/media/sprd_dcam/common/gen_scale_coef.h create mode 100755 drivers/media/sprd_dcam/common/parse_hwinfo.c create mode 100755 drivers/media/sprd_dcam/common/parse_hwinfo.h create mode 100644 drivers/media/sprd_dcam/common/parse_hwinfo_tshark2.h create mode 100644 drivers/media/sprd_dcam/common/sin_cos.c create mode 100644 drivers/media/sprd_dcam/common/sin_cos.h create mode 100755 drivers/media/sprd_dcam/flash/Makefile create mode 100644 drivers/media/sprd_dcam/flash/flash.h create mode 100644 drivers/media/sprd_dcam/flash/flash_common.c create mode 100644 drivers/media/sprd_dcam/flash/flash_gpio.c create mode 100644 drivers/media/sprd_dcam/flash/flash_kanas_w.c create mode 100644 drivers/media/sprd_dcam/flash/flash_parallel_connect_bg.c create mode 100644 drivers/media/sprd_dcam/flash/flash_sgm3140.c create mode 100644 drivers/media/sprd_dcam/flash/flash_sm5701.c create mode 100644 drivers/media/sprd_dcam/flash/flash_sprd_sm5701.c create mode 100644 drivers/media/sprd_dcam/flash/flash_vivalto.c create mode 100644 drivers/media/sprd_dcam/pike/dcam_drv.c create mode 100755 drivers/media/sprd_dcam/pike/dcam_drv.h create mode 100644 drivers/media/sprd_dcam/pike/dcam_reg.h create mode 100755 drivers/media/sprd_dcam/sc8830/dcam_drv.h create mode 100644 drivers/media/sprd_dcam/sharkl/dcam_drv.c create mode 100755 drivers/media/sprd_dcam/sharkl/dcam_drv.h create mode 100644 drivers/media/sprd_dcam/sharkl/dcam_reg.h create mode 100644 drivers/media/sprd_dcam/tshark/dcam_drv.c create mode 100755 drivers/media/sprd_dcam/tshark/dcam_drv.h create mode 100755 drivers/media/sprd_dcam/tshark/dcam_reg.h create mode 100755 drivers/media/sprd_dcam/tshark2/dcam_drv.c create mode 100755 drivers/media/sprd_dcam/tshark2/dcam_drv.h create mode 100755 drivers/media/sprd_dcam/tshark2/dcam_reg.h create mode 100644 drivers/media/sprd_gsp/Kconfig create mode 100644 drivers/media/sprd_gsp/Makefile create mode 100644 drivers/media/sprd_gsp/gsp_config_if.c create mode 100644 drivers/media/sprd_gsp/gsp_config_if.h create mode 100644 drivers/media/sprd_gsp/gsp_debug.h create mode 100644 drivers/media/sprd_gsp/gsp_drv.c create mode 100644 drivers/media/sprd_gsp/gsp_drv_common.h create mode 100644 drivers/media/sprd_gsp/scaler_coef_cal.c create mode 100644 drivers/media/sprd_gsp/scaler_coef_cal.h create mode 100644 drivers/media/sprd_gsp/sin_cos.c create mode 100644 drivers/media/sprd_gsp/sin_cos.h create mode 100644 drivers/media/sprd_isp/Kconfig create mode 100644 drivers/media/sprd_isp/Makefile create mode 100644 drivers/media/sprd_isp/Shark_reg_isp.h create mode 100755 drivers/media/sprd_isp/compat_isp_drv.c create mode 100644 drivers/media/sprd_isp/compat_isp_drv.h create mode 100644 drivers/media/sprd_isp/compat_isp_drv_kernel.c create mode 100644 drivers/media/sprd_isp/compat_isp_drv_kernel.h create mode 100644 drivers/media/sprd_isp/isp1.0/Shark_reg_isp.h create mode 100644 drivers/media/sprd_isp/isp1.0/Tiger_reg_isp.h create mode 100644 drivers/media/sprd_isp/isp1.0/compat_isp_drv_kernel.c create mode 100644 drivers/media/sprd_isp/isp1.0/compat_isp_drv_kernel.h create mode 100644 drivers/media/sprd_isp/isp1.0/isp_drv_kernel.c create mode 100644 drivers/media/sprd_isp/isp1.0/isp_drv_null.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/inc/isp_block.h create mode 100644 drivers/media/sprd_isp/isp2.0/pike/inc/isp_drv.h create mode 100644 drivers/media/sprd_isp/isp2.0/pike/inc/isp_reg.h create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_cfg_param.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_1d_lsc.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_2d_lsc.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_aca.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_anti_flicker.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_arbiter.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_awb.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_bdn.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_binning4awb.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_blc.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_bpc.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_brightness.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_capability.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_cce.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_cdn.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_cfa.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_cmc10.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_cmc8.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_common.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_contrast.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_csa.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_csc.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_css.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_ct.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_dispatch.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_edge.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_emboss.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_fetch.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_gamma.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_grgb.c create mode 100755 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_hdr.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_hist.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_hist2.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_hsv.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_hua.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_isr.c create mode 100755 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_nlc.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_nlm.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_pgg.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_post_cdn.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_pre_cdn.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_pre_cdn_rgb.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_prefilter.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_pstrz.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_pwd.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_raw_aem.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_raw_afm.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_rgb2y.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_rgb_afm.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_rgb_gain.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_rgb_gain2.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_store.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_uv_prefilter.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_y_delay.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_y_gamma.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_yiq_aem.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_yiq_afm.c create mode 100644 drivers/media/sprd_isp/isp2.0/pike/src/isp_k_yuv_nlm.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/inc/isp_block.h create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/inc/isp_drv.h create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/inc/isp_reg.h create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_cfg_param.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_1d_lsc.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_2d_lsc.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_aca.c create mode 100755 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_anti_flicker.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_arbiter.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_awb.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_bdn.c create mode 100755 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_binning4awb.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_blc.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_bpc.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_brightness.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_capability.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_cce.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_cdn.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_cfa.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_cmc10.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_cmc8.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_common.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_contrast.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_csa.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_csc.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_css.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_ct.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_dispatch.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_edge.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_emboss.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_fetch.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_gamma.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_grgb.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_hist.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_hist2.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_hsv.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_hua.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_iircnr.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_isr.c create mode 100755 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_nlc.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_nlm.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_pgg.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_post_cdn.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_pre_cdn.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_pre_cdn_rgb.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_prefilter.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_pstrz.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_pwd.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_raw_aem.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_raw_afm.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_raw_sizer.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_rgb_gain.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_rgb_gain2.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_store.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_y_delay.c create mode 100644 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_y_gamma.c create mode 100755 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_yiq_aem.c create mode 100755 drivers/media/sprd_isp/isp2.0/tshark2/src/isp_k_yiq_afm.c create mode 100644 drivers/media/sprd_isp/isp_drv.c create mode 100644 drivers/media/sprd_rotation/Kconfig create mode 100644 drivers/media/sprd_rotation/Makefile create mode 100644 drivers/media/sprd_rotation/img_rot.c create mode 100644 drivers/media/sprd_rotation/img_rot.h create mode 100644 drivers/media/sprd_rotation/rot_drv.c create mode 100644 drivers/media/sprd_rotation/rot_drv.h create mode 100644 drivers/media/sprd_rotation/rot_reg.h create mode 100644 drivers/media/sprd_scale/Makefile create mode 100644 drivers/media/sprd_scale/common/compat_img_scale.c create mode 100644 drivers/media/sprd_scale/common/compat_img_scale.h create mode 100644 drivers/media/sprd_scale/common/gen_scale_coef.c create mode 100644 drivers/media/sprd_scale/common/gen_scale_coef.h create mode 100644 drivers/media/sprd_scale/common/img_scale.c create mode 100644 drivers/media/sprd_scale/common/img_scale.h create mode 100644 drivers/media/sprd_scale/common/sin_cos.c create mode 100644 drivers/media/sprd_scale/common/sin_cos.h create mode 100755 drivers/media/sprd_scale/scale_drv.c create mode 100644 drivers/media/sprd_scale/scale_drv.h create mode 100755 drivers/media/sprd_scale/scale_reg.h create mode 100644 drivers/media/sprd_sensor/Makefile create mode 100644 drivers/media/sprd_sensor/compat_sensor_drv_k.c create mode 100644 drivers/media/sprd_sensor/compat_sensor_drv_k.h create mode 100644 drivers/media/sprd_sensor/csi2/csi_access.c create mode 100644 drivers/media/sprd_sensor/csi2/csi_access.h create mode 100644 drivers/media/sprd_sensor/csi2/csi_api.c create mode 100644 drivers/media/sprd_sensor/csi2/csi_api.h create mode 100755 drivers/media/sprd_sensor/csi2/csi_api_null.c create mode 100644 drivers/media/sprd_sensor/csi2/csi_driver.c create mode 100644 drivers/media/sprd_sensor/csi2/csi_driver.h create mode 100644 drivers/media/sprd_sensor/csi2/csi_log.c create mode 100644 drivers/media/sprd_sensor/csi2/csi_log.h create mode 100644 drivers/media/sprd_sensor/csi2/csi_system.c create mode 100644 drivers/media/sprd_sensor/csi2/csi_system.h create mode 100644 drivers/media/sprd_sensor/csi2/csi_types.h create mode 100644 drivers/media/sprd_sensor/csi2/usc28c_init.c create mode 100644 drivers/media/sprd_sensor/otp/Makefile create mode 100644 drivers/media/sprd_sensor/otp/sensor_otp.c create mode 100644 drivers/media/sprd_sensor/otp/sensor_otp.h create mode 100644 drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c create mode 100755 drivers/media/sprd_sensor/power/Makefile create mode 100644 drivers/media/sprd_sensor/power/sensor_power.c create mode 100644 drivers/media/sprd_sensor/power/sensor_power.h create mode 100755 drivers/media/sprd_sensor/power/sensor_power_coreprime3g_ve.c create mode 100644 drivers/media/sprd_sensor/power/sensor_power_coreprimelite.c create mode 100644 drivers/media/sprd_sensor/power/sensor_power_grandprime3g_ve.c create mode 100755 drivers/media/sprd_sensor/power/sensor_power_grandprime_dtv.c create mode 100644 drivers/media/sprd_sensor/power/sensor_power_sharkl_t8.c create mode 100644 drivers/media/sprd_sensor/power/sensor_power_sharkls_z3lte.c create mode 100755 drivers/media/sprd_sensor/power/sensor_power_tshark2tabe.c create mode 100755 drivers/media/sprd_sensor/sensor_drv_k.c create mode 100644 drivers/media/sprd_sensor/sensor_drv_sprd.h create mode 100644 drivers/media/tuners/Kconfig create mode 100644 drivers/media/tuners/Makefile create mode 100644 drivers/media/tuners/e4000.c create mode 100644 drivers/media/tuners/e4000.h create mode 100644 drivers/media/tuners/e4000_priv.h create mode 100644 drivers/media/tuners/fc0011.c create mode 100644 drivers/media/tuners/fc0011.h create mode 100644 drivers/media/tuners/fc0012-priv.h create mode 100644 drivers/media/tuners/fc0012.c create mode 100644 drivers/media/tuners/fc0012.h create mode 100644 drivers/media/tuners/fc0013-priv.h create mode 100644 drivers/media/tuners/fc0013.c create mode 100644 drivers/media/tuners/fc0013.h create mode 100644 drivers/media/tuners/fc001x-common.h create mode 100644 drivers/media/tuners/fc2580.c create mode 100644 drivers/media/tuners/fc2580.h create mode 100644 drivers/media/tuners/fc2580_priv.h create mode 100644 drivers/media/tuners/max2165.c create mode 100644 drivers/media/tuners/max2165.h create mode 100644 drivers/media/tuners/max2165_priv.h create mode 100644 drivers/media/tuners/mc44s803.c create mode 100644 drivers/media/tuners/mc44s803.h create mode 100644 drivers/media/tuners/mc44s803_priv.h create mode 100644 drivers/media/tuners/mt2060.c create mode 100644 drivers/media/tuners/mt2060.h create mode 100644 drivers/media/tuners/mt2060_priv.h create mode 100644 drivers/media/tuners/mt2063.c create mode 100644 drivers/media/tuners/mt2063.h create mode 100644 drivers/media/tuners/mt20xx.c create mode 100644 drivers/media/tuners/mt20xx.h create mode 100644 drivers/media/tuners/mt2131.c create mode 100644 drivers/media/tuners/mt2131.h create mode 100644 drivers/media/tuners/mt2131_priv.h create mode 100644 drivers/media/tuners/mt2266.c create mode 100644 drivers/media/tuners/mt2266.h create mode 100644 drivers/media/tuners/mxl5005s.c create mode 100644 drivers/media/tuners/mxl5005s.h create mode 100644 drivers/media/tuners/mxl5007t.c create mode 100644 drivers/media/tuners/mxl5007t.h create mode 100644 drivers/media/tuners/qt1010.c create mode 100644 drivers/media/tuners/qt1010.h create mode 100644 drivers/media/tuners/qt1010_priv.h create mode 100644 drivers/media/tuners/r820t.c create mode 100644 drivers/media/tuners/r820t.h create mode 100644 drivers/media/tuners/tda18212.c create mode 100644 drivers/media/tuners/tda18212.h create mode 100644 drivers/media/tuners/tda18218.c create mode 100644 drivers/media/tuners/tda18218.h create mode 100644 drivers/media/tuners/tda18218_priv.h create mode 100644 drivers/media/tuners/tda18271-common.c create mode 100644 drivers/media/tuners/tda18271-fe.c create mode 100644 drivers/media/tuners/tda18271-maps.c create mode 100644 drivers/media/tuners/tda18271-priv.h create mode 100644 drivers/media/tuners/tda18271.h create mode 100644 drivers/media/tuners/tda827x.c create mode 100644 drivers/media/tuners/tda827x.h create mode 100644 drivers/media/tuners/tda8290.c create mode 100644 drivers/media/tuners/tda8290.h create mode 100644 drivers/media/tuners/tda9887.c create mode 100644 drivers/media/tuners/tda9887.h create mode 100644 drivers/media/tuners/tea5761.c create mode 100644 drivers/media/tuners/tea5761.h create mode 100644 drivers/media/tuners/tea5767.c create mode 100644 drivers/media/tuners/tea5767.h create mode 100644 drivers/media/tuners/tua9001.c create mode 100644 drivers/media/tuners/tua9001.h create mode 100644 drivers/media/tuners/tua9001_priv.h create mode 100644 drivers/media/tuners/tuner-i2c.h create mode 100644 drivers/media/tuners/tuner-simple.c create mode 100644 drivers/media/tuners/tuner-simple.h create mode 100644 drivers/media/tuners/tuner-types.c create mode 100644 drivers/media/tuners/tuner-xc2028-types.h create mode 100644 drivers/media/tuners/tuner-xc2028.c create mode 100644 drivers/media/tuners/tuner-xc2028.h create mode 100644 drivers/media/tuners/tuner_it913x.c create mode 100644 drivers/media/tuners/tuner_it913x.h create mode 100644 drivers/media/tuners/tuner_it913x_priv.h create mode 100644 drivers/media/tuners/xc4000.c create mode 100644 drivers/media/tuners/xc4000.h create mode 100644 drivers/media/tuners/xc5000.c create mode 100644 drivers/media/tuners/xc5000.h create mode 100644 drivers/media/usb/Kconfig create mode 100644 drivers/media/usb/Makefile create mode 100644 drivers/media/usb/au0828/Kconfig create mode 100644 drivers/media/usb/au0828/Makefile create mode 100644 drivers/media/usb/au0828/au0828-cards.c create mode 100644 drivers/media/usb/au0828/au0828-cards.h create mode 100644 drivers/media/usb/au0828/au0828-core.c create mode 100644 drivers/media/usb/au0828/au0828-dvb.c create mode 100644 drivers/media/usb/au0828/au0828-i2c.c create mode 100644 drivers/media/usb/au0828/au0828-reg.h create mode 100644 drivers/media/usb/au0828/au0828-vbi.c create mode 100644 drivers/media/usb/au0828/au0828-video.c create mode 100644 drivers/media/usb/au0828/au0828.h create mode 100644 drivers/media/usb/b2c2/Kconfig create mode 100644 drivers/media/usb/b2c2/Makefile create mode 100644 drivers/media/usb/b2c2/flexcop-usb.c create mode 100644 drivers/media/usb/b2c2/flexcop-usb.h create mode 100644 drivers/media/usb/cpia2/Kconfig create mode 100644 drivers/media/usb/cpia2/Makefile create mode 100644 drivers/media/usb/cpia2/cpia2.h create mode 100644 drivers/media/usb/cpia2/cpia2_core.c create mode 100644 drivers/media/usb/cpia2/cpia2_registers.h create mode 100644 drivers/media/usb/cpia2/cpia2_usb.c create mode 100644 drivers/media/usb/cpia2/cpia2_v4l.c create mode 100644 drivers/media/usb/cx231xx/Kconfig create mode 100644 drivers/media/usb/cx231xx/Makefile create mode 100644 drivers/media/usb/cx231xx/cx231xx-417.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-audio.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-avcore.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-cards.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-conf-reg.h create mode 100644 drivers/media/usb/cx231xx/cx231xx-core.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-dif.h create mode 100644 drivers/media/usb/cx231xx/cx231xx-dvb.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-i2c.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-input.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h create mode 100644 drivers/media/usb/cx231xx/cx231xx-reg.h create mode 100644 drivers/media/usb/cx231xx/cx231xx-vbi.c create mode 100644 drivers/media/usb/cx231xx/cx231xx-vbi.h create mode 100644 drivers/media/usb/cx231xx/cx231xx-video.c create mode 100644 drivers/media/usb/cx231xx/cx231xx.h create mode 100644 drivers/media/usb/dvb-usb-v2/Kconfig create mode 100644 drivers/media/usb/dvb-usb-v2/Makefile create mode 100644 drivers/media/usb/dvb-usb-v2/af9015.c create mode 100644 drivers/media/usb/dvb-usb-v2/af9015.h create mode 100644 drivers/media/usb/dvb-usb-v2/af9035.c create mode 100644 drivers/media/usb/dvb-usb-v2/af9035.h create mode 100644 drivers/media/usb/dvb-usb-v2/anysee.c create mode 100644 drivers/media/usb/dvb-usb-v2/anysee.h create mode 100644 drivers/media/usb/dvb-usb-v2/au6610.c create mode 100644 drivers/media/usb/dvb-usb-v2/au6610.h create mode 100644 drivers/media/usb/dvb-usb-v2/az6007.c create mode 100644 drivers/media/usb/dvb-usb-v2/ce6230.c create mode 100644 drivers/media/usb/dvb-usb-v2/ce6230.h create mode 100644 drivers/media/usb/dvb-usb-v2/dvb_usb.h create mode 100644 drivers/media/usb/dvb-usb-v2/dvb_usb_common.h create mode 100644 drivers/media/usb/dvb-usb-v2/dvb_usb_core.c create mode 100644 drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c create mode 100644 drivers/media/usb/dvb-usb-v2/ec168.c create mode 100644 drivers/media/usb/dvb-usb-v2/ec168.h create mode 100644 drivers/media/usb/dvb-usb-v2/gl861.c create mode 100644 drivers/media/usb/dvb-usb-v2/gl861.h create mode 100644 drivers/media/usb/dvb-usb-v2/it913x.c create mode 100644 drivers/media/usb/dvb-usb-v2/lmedm04.c create mode 100644 drivers/media/usb/dvb-usb-v2/lmedm04.h create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf.c create mode 100644 drivers/media/usb/dvb-usb-v2/mxl111sf.h create mode 100644 drivers/media/usb/dvb-usb-v2/rtl28xxu.c create mode 100644 drivers/media/usb/dvb-usb-v2/rtl28xxu.h create mode 100644 drivers/media/usb/dvb-usb-v2/usb_urb.c create mode 100644 drivers/media/usb/dvb-usb/Kconfig create mode 100644 drivers/media/usb/dvb-usb/Makefile create mode 100644 drivers/media/usb/dvb-usb/a800.c create mode 100644 drivers/media/usb/dvb-usb/af9005-fe.c create mode 100644 drivers/media/usb/dvb-usb/af9005-remote.c create mode 100644 drivers/media/usb/dvb-usb/af9005-script.h create mode 100644 drivers/media/usb/dvb-usb/af9005.c create mode 100644 drivers/media/usb/dvb-usb/af9005.h create mode 100644 drivers/media/usb/dvb-usb/az6027.c create mode 100644 drivers/media/usb/dvb-usb/az6027.h create mode 100644 drivers/media/usb/dvb-usb/cinergyT2-core.c create mode 100644 drivers/media/usb/dvb-usb/cinergyT2-fe.c create mode 100644 drivers/media/usb/dvb-usb/cinergyT2.h create mode 100644 drivers/media/usb/dvb-usb/cxusb.c create mode 100644 drivers/media/usb/dvb-usb/cxusb.h create mode 100644 drivers/media/usb/dvb-usb/dib0700.h create mode 100644 drivers/media/usb/dvb-usb/dib0700_core.c create mode 100644 drivers/media/usb/dvb-usb/dib0700_devices.c create mode 100644 drivers/media/usb/dvb-usb/dib07x0.h create mode 100644 drivers/media/usb/dvb-usb/dibusb-common.c create mode 100644 drivers/media/usb/dvb-usb/dibusb-mb.c create mode 100644 drivers/media/usb/dvb-usb/dibusb-mc.c create mode 100644 drivers/media/usb/dvb-usb/dibusb.h create mode 100644 drivers/media/usb/dvb-usb/digitv.c create mode 100644 drivers/media/usb/dvb-usb/digitv.h create mode 100644 drivers/media/usb/dvb-usb/dtt200u-fe.c create mode 100644 drivers/media/usb/dvb-usb/dtt200u.c create mode 100644 drivers/media/usb/dvb-usb/dtt200u.h create mode 100644 drivers/media/usb/dvb-usb/dtv5100.c create mode 100644 drivers/media/usb/dvb-usb/dtv5100.h create mode 100644 drivers/media/usb/dvb-usb/dvb-usb-common.h create mode 100644 drivers/media/usb/dvb-usb/dvb-usb-dvb.c create mode 100644 drivers/media/usb/dvb-usb/dvb-usb-firmware.c create mode 100644 drivers/media/usb/dvb-usb/dvb-usb-i2c.c create mode 100644 drivers/media/usb/dvb-usb/dvb-usb-init.c create mode 100644 drivers/media/usb/dvb-usb/dvb-usb-remote.c create mode 100644 drivers/media/usb/dvb-usb/dvb-usb-urb.c create mode 100644 drivers/media/usb/dvb-usb/dvb-usb.h create mode 100644 drivers/media/usb/dvb-usb/dw2102.c create mode 100644 drivers/media/usb/dvb-usb/dw2102.h create mode 100644 drivers/media/usb/dvb-usb/friio-fe.c create mode 100644 drivers/media/usb/dvb-usb/friio.c create mode 100644 drivers/media/usb/dvb-usb/friio.h create mode 100644 drivers/media/usb/dvb-usb/gp8psk-fe.c create mode 100644 drivers/media/usb/dvb-usb/gp8psk.c create mode 100644 drivers/media/usb/dvb-usb/gp8psk.h create mode 100644 drivers/media/usb/dvb-usb/m920x.c create mode 100644 drivers/media/usb/dvb-usb/m920x.h create mode 100644 drivers/media/usb/dvb-usb/nova-t-usb2.c create mode 100644 drivers/media/usb/dvb-usb/opera1.c create mode 100644 drivers/media/usb/dvb-usb/pctv452e.c create mode 100644 drivers/media/usb/dvb-usb/technisat-usb2.c create mode 100644 drivers/media/usb/dvb-usb/ttusb2.c create mode 100644 drivers/media/usb/dvb-usb/ttusb2.h create mode 100644 drivers/media/usb/dvb-usb/umt-010.c create mode 100644 drivers/media/usb/dvb-usb/usb-urb.c create mode 100644 drivers/media/usb/dvb-usb/vp702x-fe.c create mode 100644 drivers/media/usb/dvb-usb/vp702x.c create mode 100644 drivers/media/usb/dvb-usb/vp702x.h create mode 100644 drivers/media/usb/dvb-usb/vp7045-fe.c create mode 100644 drivers/media/usb/dvb-usb/vp7045.c create mode 100644 drivers/media/usb/dvb-usb/vp7045.h create mode 100644 drivers/media/usb/em28xx/Kconfig create mode 100644 drivers/media/usb/em28xx/Makefile create mode 100644 drivers/media/usb/em28xx/em28xx-audio.c create mode 100644 drivers/media/usb/em28xx/em28xx-camera.c create mode 100644 drivers/media/usb/em28xx/em28xx-cards.c create mode 100644 drivers/media/usb/em28xx/em28xx-core.c create mode 100644 drivers/media/usb/em28xx/em28xx-dvb.c create mode 100644 drivers/media/usb/em28xx/em28xx-i2c.c create mode 100644 drivers/media/usb/em28xx/em28xx-input.c create mode 100644 drivers/media/usb/em28xx/em28xx-reg.h create mode 100644 drivers/media/usb/em28xx/em28xx-vbi.c create mode 100644 drivers/media/usb/em28xx/em28xx-video.c create mode 100644 drivers/media/usb/em28xx/em28xx.h create mode 100644 drivers/media/usb/gspca/Kconfig create mode 100644 drivers/media/usb/gspca/Makefile create mode 100644 drivers/media/usb/gspca/autogain_functions.c create mode 100644 drivers/media/usb/gspca/benq.c create mode 100644 drivers/media/usb/gspca/conex.c create mode 100644 drivers/media/usb/gspca/cpia1.c create mode 100644 drivers/media/usb/gspca/etoms.c create mode 100644 drivers/media/usb/gspca/finepix.c create mode 100644 drivers/media/usb/gspca/gl860/Kconfig create mode 100644 drivers/media/usb/gspca/gl860/Makefile create mode 100644 drivers/media/usb/gspca/gl860/gl860-mi1320.c create mode 100644 drivers/media/usb/gspca/gl860/gl860-mi2020.c create mode 100644 drivers/media/usb/gspca/gl860/gl860-ov2640.c create mode 100644 drivers/media/usb/gspca/gl860/gl860-ov9655.c create mode 100644 drivers/media/usb/gspca/gl860/gl860.c create mode 100644 drivers/media/usb/gspca/gl860/gl860.h create mode 100644 drivers/media/usb/gspca/gspca.c create mode 100644 drivers/media/usb/gspca/gspca.h create mode 100644 drivers/media/usb/gspca/jeilinj.c create mode 100644 drivers/media/usb/gspca/jl2005bcd.c create mode 100644 drivers/media/usb/gspca/jpeg.h create mode 100644 drivers/media/usb/gspca/kinect.c create mode 100644 drivers/media/usb/gspca/konica.c create mode 100644 drivers/media/usb/gspca/m5602/Kconfig create mode 100644 drivers/media/usb/gspca/m5602/Makefile create mode 100644 drivers/media/usb/gspca/m5602/m5602_bridge.h create mode 100644 drivers/media/usb/gspca/m5602/m5602_core.c create mode 100644 drivers/media/usb/gspca/m5602/m5602_mt9m111.c create mode 100644 drivers/media/usb/gspca/m5602/m5602_mt9m111.h create mode 100644 drivers/media/usb/gspca/m5602/m5602_ov7660.c create mode 100644 drivers/media/usb/gspca/m5602/m5602_ov7660.h create mode 100644 drivers/media/usb/gspca/m5602/m5602_ov9650.c create mode 100644 drivers/media/usb/gspca/m5602/m5602_ov9650.h create mode 100644 drivers/media/usb/gspca/m5602/m5602_po1030.c create mode 100644 drivers/media/usb/gspca/m5602/m5602_po1030.h create mode 100644 drivers/media/usb/gspca/m5602/m5602_s5k4aa.c create mode 100644 drivers/media/usb/gspca/m5602/m5602_s5k4aa.h create mode 100644 drivers/media/usb/gspca/m5602/m5602_s5k83a.c create mode 100644 drivers/media/usb/gspca/m5602/m5602_s5k83a.h create mode 100644 drivers/media/usb/gspca/m5602/m5602_sensor.h create mode 100644 drivers/media/usb/gspca/mars.c create mode 100644 drivers/media/usb/gspca/mr97310a.c create mode 100644 drivers/media/usb/gspca/nw80x.c create mode 100644 drivers/media/usb/gspca/ov519.c create mode 100644 drivers/media/usb/gspca/ov534.c create mode 100644 drivers/media/usb/gspca/ov534_9.c create mode 100644 drivers/media/usb/gspca/pac207.c create mode 100644 drivers/media/usb/gspca/pac7302.c create mode 100644 drivers/media/usb/gspca/pac7311.c create mode 100644 drivers/media/usb/gspca/pac_common.h create mode 100644 drivers/media/usb/gspca/se401.c create mode 100644 drivers/media/usb/gspca/se401.h create mode 100644 drivers/media/usb/gspca/sn9c2028.c create mode 100644 drivers/media/usb/gspca/sn9c2028.h create mode 100644 drivers/media/usb/gspca/sn9c20x.c create mode 100644 drivers/media/usb/gspca/sonixb.c create mode 100644 drivers/media/usb/gspca/sonixj.c create mode 100644 drivers/media/usb/gspca/spca1528.c create mode 100644 drivers/media/usb/gspca/spca500.c create mode 100644 drivers/media/usb/gspca/spca501.c create mode 100644 drivers/media/usb/gspca/spca505.c create mode 100644 drivers/media/usb/gspca/spca506.c create mode 100644 drivers/media/usb/gspca/spca508.c create mode 100644 drivers/media/usb/gspca/spca561.c create mode 100644 drivers/media/usb/gspca/sq905.c create mode 100644 drivers/media/usb/gspca/sq905c.c create mode 100644 drivers/media/usb/gspca/sq930x.c create mode 100644 drivers/media/usb/gspca/stk014.c create mode 100644 drivers/media/usb/gspca/stv0680.c create mode 100644 drivers/media/usb/gspca/stv06xx/Kconfig create mode 100644 drivers/media/usb/gspca/stv06xx/Makefile create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx.c create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx.h create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.c create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.h create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_sensor.h create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_st6422.c create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_st6422.h create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c create mode 100644 drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.h create mode 100644 drivers/media/usb/gspca/sunplus.c create mode 100644 drivers/media/usb/gspca/t613.c create mode 100644 drivers/media/usb/gspca/topro.c create mode 100644 drivers/media/usb/gspca/tv8532.c create mode 100644 drivers/media/usb/gspca/vc032x.c create mode 100644 drivers/media/usb/gspca/vicam.c create mode 100644 drivers/media/usb/gspca/w996Xcf.c create mode 100644 drivers/media/usb/gspca/xirlink_cit.c create mode 100644 drivers/media/usb/gspca/zc3xx-reg.h create mode 100644 drivers/media/usb/gspca/zc3xx.c create mode 100644 drivers/media/usb/hdpvr/Kconfig create mode 100644 drivers/media/usb/hdpvr/Makefile create mode 100644 drivers/media/usb/hdpvr/hdpvr-control.c create mode 100644 drivers/media/usb/hdpvr/hdpvr-core.c create mode 100644 drivers/media/usb/hdpvr/hdpvr-i2c.c create mode 100644 drivers/media/usb/hdpvr/hdpvr-video.c create mode 100644 drivers/media/usb/hdpvr/hdpvr.h create mode 100644 drivers/media/usb/pvrusb2/Kconfig create mode 100644 drivers/media/usb/pvrusb2/Makefile create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-audio.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-audio.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-context.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-context.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-ctrl.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-ctrl.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-debug.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-debugifc.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-debugifc.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-devattr.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-devattr.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-dvb.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-dvb.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-eeprom.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-eeprom.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-encoder.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-encoder.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-hdw.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-hdw.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-i2c-core.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-io.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-io.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-ioread.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-ioread.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-main.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-std.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-std.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-sysfs.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-sysfs.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-util.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-v4l2.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-video-v4l.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-wm8775.c create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-wm8775.h create mode 100644 drivers/media/usb/pvrusb2/pvrusb2.h create mode 100644 drivers/media/usb/pwc/Kconfig create mode 100644 drivers/media/usb/pwc/Makefile create mode 100644 drivers/media/usb/pwc/philips.txt create mode 100644 drivers/media/usb/pwc/pwc-ctrl.c create mode 100644 drivers/media/usb/pwc/pwc-dec1.c create mode 100644 drivers/media/usb/pwc/pwc-dec1.h create mode 100644 drivers/media/usb/pwc/pwc-dec23.c create mode 100644 drivers/media/usb/pwc/pwc-dec23.h create mode 100644 drivers/media/usb/pwc/pwc-if.c create mode 100644 drivers/media/usb/pwc/pwc-kiara.c create mode 100644 drivers/media/usb/pwc/pwc-kiara.h create mode 100644 drivers/media/usb/pwc/pwc-misc.c create mode 100644 drivers/media/usb/pwc/pwc-nala.h create mode 100644 drivers/media/usb/pwc/pwc-timon.c create mode 100644 drivers/media/usb/pwc/pwc-timon.h create mode 100644 drivers/media/usb/pwc/pwc-uncompress.c create mode 100644 drivers/media/usb/pwc/pwc-v4l.c create mode 100644 drivers/media/usb/pwc/pwc.h create mode 100644 drivers/media/usb/s2255/Kconfig create mode 100644 drivers/media/usb/s2255/Makefile create mode 100644 drivers/media/usb/s2255/s2255drv.c create mode 100644 drivers/media/usb/siano/Kconfig create mode 100644 drivers/media/usb/siano/Makefile create mode 100644 drivers/media/usb/siano/smsusb.c create mode 100644 drivers/media/usb/sn9c102/Kconfig create mode 100644 drivers/media/usb/sn9c102/Makefile create mode 100644 drivers/media/usb/sn9c102/sn9c102.h create mode 100644 drivers/media/usb/sn9c102/sn9c102_config.h create mode 100644 drivers/media/usb/sn9c102/sn9c102_core.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_devtable.h create mode 100644 drivers/media/usb/sn9c102/sn9c102_hv7131d.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_hv7131r.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_mi0343.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_mi0360.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_mt9v111.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_ov7630.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_ov7660.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_pas106b.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_pas202bcb.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_sensor.h create mode 100644 drivers/media/usb/sn9c102/sn9c102_tas5110c1b.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_tas5110d.c create mode 100644 drivers/media/usb/sn9c102/sn9c102_tas5130d1b.c create mode 100644 drivers/media/usb/stk1160/Kconfig create mode 100644 drivers/media/usb/stk1160/Makefile create mode 100644 drivers/media/usb/stk1160/stk1160-ac97.c create mode 100644 drivers/media/usb/stk1160/stk1160-core.c create mode 100644 drivers/media/usb/stk1160/stk1160-i2c.c create mode 100644 drivers/media/usb/stk1160/stk1160-reg.h create mode 100644 drivers/media/usb/stk1160/stk1160-v4l.c create mode 100644 drivers/media/usb/stk1160/stk1160-video.c create mode 100644 drivers/media/usb/stk1160/stk1160.h create mode 100644 drivers/media/usb/stkwebcam/Kconfig create mode 100644 drivers/media/usb/stkwebcam/Makefile create mode 100644 drivers/media/usb/stkwebcam/stk-sensor.c create mode 100644 drivers/media/usb/stkwebcam/stk-webcam.c create mode 100644 drivers/media/usb/stkwebcam/stk-webcam.h create mode 100644 drivers/media/usb/tlg2300/Kconfig create mode 100644 drivers/media/usb/tlg2300/Makefile create mode 100644 drivers/media/usb/tlg2300/pd-alsa.c create mode 100644 drivers/media/usb/tlg2300/pd-common.h create mode 100644 drivers/media/usb/tlg2300/pd-dvb.c create mode 100644 drivers/media/usb/tlg2300/pd-main.c create mode 100644 drivers/media/usb/tlg2300/pd-radio.c create mode 100644 drivers/media/usb/tlg2300/pd-video.c create mode 100644 drivers/media/usb/tlg2300/vendorcmds.h create mode 100644 drivers/media/usb/tm6000/Kconfig create mode 100644 drivers/media/usb/tm6000/Makefile create mode 100644 drivers/media/usb/tm6000/tm6000-alsa.c create mode 100644 drivers/media/usb/tm6000/tm6000-cards.c create mode 100644 drivers/media/usb/tm6000/tm6000-core.c create mode 100644 drivers/media/usb/tm6000/tm6000-dvb.c create mode 100644 drivers/media/usb/tm6000/tm6000-i2c.c create mode 100644 drivers/media/usb/tm6000/tm6000-input.c create mode 100644 drivers/media/usb/tm6000/tm6000-regs.h create mode 100644 drivers/media/usb/tm6000/tm6000-stds.c create mode 100644 drivers/media/usb/tm6000/tm6000-usb-isoc.h create mode 100644 drivers/media/usb/tm6000/tm6000-video.c create mode 100644 drivers/media/usb/tm6000/tm6000.h create mode 100644 drivers/media/usb/ttusb-budget/Kconfig create mode 100644 drivers/media/usb/ttusb-budget/Makefile create mode 100644 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c create mode 100644 drivers/media/usb/ttusb-dec/Kconfig create mode 100644 drivers/media/usb/ttusb-dec/Makefile create mode 100644 drivers/media/usb/ttusb-dec/ttusb_dec.c create mode 100644 drivers/media/usb/ttusb-dec/ttusbdecfe.c create mode 100644 drivers/media/usb/ttusb-dec/ttusbdecfe.h create mode 100644 drivers/media/usb/usbvision/Kconfig create mode 100644 drivers/media/usb/usbvision/Makefile create mode 100644 drivers/media/usb/usbvision/usbvision-cards.c create mode 100644 drivers/media/usb/usbvision/usbvision-cards.h create mode 100644 drivers/media/usb/usbvision/usbvision-core.c create mode 100644 drivers/media/usb/usbvision/usbvision-i2c.c create mode 100644 drivers/media/usb/usbvision/usbvision-video.c create mode 100644 drivers/media/usb/usbvision/usbvision.h create mode 100644 drivers/media/usb/uvc/Kconfig create mode 100644 drivers/media/usb/uvc/Makefile create mode 100644 drivers/media/usb/uvc/uvc_ctrl.c create mode 100644 drivers/media/usb/uvc/uvc_debugfs.c create mode 100644 drivers/media/usb/uvc/uvc_driver.c create mode 100644 drivers/media/usb/uvc/uvc_entity.c create mode 100644 drivers/media/usb/uvc/uvc_isight.c create mode 100644 drivers/media/usb/uvc/uvc_queue.c create mode 100644 drivers/media/usb/uvc/uvc_status.c create mode 100644 drivers/media/usb/uvc/uvc_v4l2.c create mode 100644 drivers/media/usb/uvc/uvc_video.c create mode 100644 drivers/media/usb/uvc/uvcvideo.h create mode 100644 drivers/media/usb/zr364xx/Kconfig create mode 100644 drivers/media/usb/zr364xx/Makefile create mode 100644 drivers/media/usb/zr364xx/zr364xx.c create mode 100644 drivers/media/v4l2-core/Kconfig create mode 100644 drivers/media/v4l2-core/Makefile create mode 100644 drivers/media/v4l2-core/tuner-core.c create mode 100644 drivers/media/v4l2-core/v4l2-common.c create mode 100644 drivers/media/v4l2-core/v4l2-compat-ioctl32.c create mode 100644 drivers/media/v4l2-core/v4l2-ctrls.c create mode 100644 drivers/media/v4l2-core/v4l2-dev.c create mode 100644 drivers/media/v4l2-core/v4l2-device.c create mode 100644 drivers/media/v4l2-core/v4l2-event.c create mode 100644 drivers/media/v4l2-core/v4l2-fh.c create mode 100644 drivers/media/v4l2-core/v4l2-int-device.c create mode 100644 drivers/media/v4l2-core/v4l2-ioctl.c create mode 100644 drivers/media/v4l2-core/v4l2-mem2mem.c create mode 100644 drivers/media/v4l2-core/v4l2-of.c create mode 100644 drivers/media/v4l2-core/v4l2-subdev.c create mode 100644 drivers/media/v4l2-core/videobuf-core.c create mode 100644 drivers/media/v4l2-core/videobuf-dma-contig.c create mode 100644 drivers/media/v4l2-core/videobuf-dma-sg.c create mode 100644 drivers/media/v4l2-core/videobuf-dvb.c create mode 100644 drivers/media/v4l2-core/videobuf-vmalloc.c create mode 100644 drivers/media/v4l2-core/videobuf2-core.c create mode 100644 drivers/media/v4l2-core/videobuf2-dma-contig.c create mode 100644 drivers/media/v4l2-core/videobuf2-dma-sg.c create mode 100644 drivers/media/v4l2-core/videobuf2-memops.c create mode 100644 drivers/media/v4l2-core/videobuf2-vmalloc.c (limited to 'drivers/media') diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig new file mode 100644 index 00000000..acfbf8ee --- /dev/null +++ b/drivers/media/Kconfig @@ -0,0 +1,211 @@ +# +# Multimedia device configuration +# + +menuconfig MEDIA_SUPPORT + tristate "Multimedia support" + depends on HAS_IOMEM + help + If you want to use Webcams, Video grabber devices and/or TV devices + enable this option and other options below. + Additional info and docs are available on the web at + + +if MEDIA_SUPPORT + +comment "Multimedia core support" + +# +# Multimedia support - automatically enable V4L2 and DVB core +# +source "drivers/media/sprd_gsp/Kconfig" +config VIDEO_DCAM_SPRD + tristate "SPRD DCAM driver" + select VIDEOBUF_VMALLOC + help + Support digital camera for SPRD + +source "drivers/media/sprd_dcam/Kconfig" + +config MEDIA_CAMERA_SUPPORT + bool "Cameras/video grabbers support" + ---help--- + Enable support for webcams and video grabbers. + + Say Y when you have a webcam or a video capture grabber board. + +config MEDIA_ANALOG_TV_SUPPORT + bool "Analog TV support" + ---help--- + Enable analog TV support. + + Say Y when you have a TV board with analog support or with a + hybrid analog/digital TV chipset. + + Note: There are several DVB cards that are based on chips that + support both analog and digital TV. Disabling this option + will disable support for them. + +config MEDIA_DIGITAL_TV_SUPPORT + bool "Digital TV support" + ---help--- + Enable digital TV support. + + Say Y when you have a board with digital support or a board with + hybrid digital TV and analog TV. + +config MEDIA_RADIO_SUPPORT + bool "AM/FM radio receivers/transmitters support" + ---help--- + Enable AM/FM radio support. + + Additional info and docs are available on the web at + + + Say Y when you have a board with radio support. + + Note: There are several TV cards that are based on chips that + support radio reception. Disabling this option will + disable support for them. + +config MEDIA_RC_SUPPORT + bool "Remote Controller support" + depends on INPUT + ---help--- + Enable support for Remote Controllers on Linux. This is + needed in order to support several video capture adapters, + standalone IR receivers/transmitters, and RF receivers. + + Enable this option if you have a video capture board even + if you don't need IR, as otherwise, you may not be able to + compile the driver for your adapter. + + Say Y when you have a TV or an IR device. + +# +# Media controller +# Selectable only for webcam/grabbers, as other drivers don't use it +# + +config MEDIA_CONTROLLER + bool "Media Controller API" + depends on MEDIA_CAMERA_SUPPORT + ---help--- + Enable the media controller API used to query media devices internal + topology and configure it dynamically. + + This API is mostly used by camera interfaces in embedded platforms. + +# +# Video4Linux support +# Only enables if one of the V4L2 types (ATV, webcam, radio) is selected +# + +config VIDEO_DEV + tristate + depends on MEDIA_SUPPORT + depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT + default y + +config VIDEO_V4L2_SUBDEV_API + bool "V4L2 sub-device userspace API" + depends on VIDEO_DEV && MEDIA_CONTROLLER + ---help--- + Enables the V4L2 sub-device pad-level userspace API used to configure + video format, size and frame rate between hardware blocks. + + This API is mostly used by camera interfaces in embedded platforms. + +source "drivers/media/v4l2-core/Kconfig" + +# +# DVB Core +# Only enables if one of DTV is selected +# + +config DVB_CORE + tristate + depends on MEDIA_SUPPORT + depends on MEDIA_DIGITAL_TV_SUPPORT + default y + select CRC32 + +config DVB_NET + bool "DVB Network Support" + default (NET && INET) + depends on NET && INET && DVB_CORE + help + This option enables DVB Network Support which is a part of the DVB + standard. It is used, for example, by automatic firmware updates used + on Set-Top-Boxes. It can also be used to access the Internet via the + DVB card, if the network provider supports it. + + You may want to disable the network support on embedded devices. If + unsure say Y. + +# This Kconfig option is used by both PCI and USB drivers +config TTPCI_EEPROM + tristate + depends on I2C + default n + +source "drivers/media/dvb-core/Kconfig" + +comment "Media drivers" +source "drivers/media/rc/Kconfig" + +# +# V4L platform/mem2mem drivers +# + +source "drivers/media/usb/Kconfig" +source "drivers/media/pci/Kconfig" +source "drivers/media/platform/Kconfig" +source "drivers/media/mmc/Kconfig" +source "drivers/media/parport/Kconfig" +source "drivers/media/radio/Kconfig" + +comment "Supported FireWire (IEEE 1394) Adapters" + depends on DVB_CORE && FIREWIRE +source "drivers/media/firewire/Kconfig" + +# Common driver options +source "drivers/media/common/Kconfig" + +comment "Media ancillary drivers (tuners, sensors, i2c, frontends)" + +# +# Ancillary drivers (tuners, i2c, frontends) +# + +config MEDIA_SUBDRV_AUTOSELECT + bool "Autoselect ancillary drivers (tuners, sensors, i2c, frontends)" + depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT + default y + help + By default, a media driver auto-selects all possible ancillary + devices such as tuners, sensors, video encoders/decoders and + frontends, that are used by any of the supported devices. + + This is generally the right thing to do, except when there + are strict constraints with regards to the kernel size, + like on embedded systems. + + Use this option with care, as deselecting ancillary drivers which + are, in fact, necessary will result in the lack of the needed + functionality for your device (it may not tune or may not have + the needed demodulators). + + If unsure say Y. + +config MEDIA_ATTACH + bool + depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT + depends on MODULES + default MODULES + +source "drivers/media/i2c/Kconfig" +source "drivers/media/tuners/Kconfig" +source "drivers/media/dvb-frontends/Kconfig" + +endif # MEDIA_SUPPORT diff --git a/drivers/media/Makefile b/drivers/media/Makefile new file mode 100644 index 00000000..ad9b76d3 --- /dev/null +++ b/drivers/media/Makefile @@ -0,0 +1,40 @@ +# +# Makefile for the kernel multimedia device drivers. +# + +media-objs := media-device.o media-devnode.o media-entity.o + +# +# I2C drivers should come before other drivers, otherwise they'll fail +# when compiled as builtin drivers +# +obj-y += i2c/ tuners/ +obj-$(CONFIG_DVB_CORE) += dvb-frontends/ + +# +# Now, let's link-in the media core +# +ifeq ($(CONFIG_MEDIA_CONTROLLER),y) + obj-$(CONFIG_MEDIA_SUPPORT) += media.o +endif + +obj-$(CONFIG_VIDEO_DEV) += v4l2-core/ +obj-$(CONFIG_VIDEO_DCAM_SPRD) += sprd_dcam/ +obj-$(CONFIG_VIDEO_DCAM_SPRD) += sprd_scale/ +obj-$(CONFIG_VIDEO_DCAM_SPRD) += sprd_rotation/ +obj-$(CONFIG_VIDEO_GSP_SPRD) += sprd_gsp/ +obj-$(CONFIG_VIDEO_DCAM_SPRD) += sprd_sensor/ +obj-$(CONFIG_VIDEO_DCAM_SPRD) += sprd_isp/ +#obj-$(CONFIG_VIDEO_DCAM_SPRD) += sprd_dma_copy/ +obj-$(CONFIG_DVB_CORE) += dvb-core/ + +# There are both core and drivers at RC subtree - merge before drivers +obj-y += rc/ + +# +# Finally, merge the drivers that require the core +# + +obj-y += common/ platform/ pci/ usb/ mmc/ firewire/ parport/ +obj-$(CONFIG_VIDEO_DEV) += radio/ + diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig new file mode 100644 index 00000000..b85f88c8 --- /dev/null +++ b/drivers/media/common/Kconfig @@ -0,0 +1,25 @@ +# Used by common drivers, when they need to ask questions +config MEDIA_COMMON_OPTIONS + bool + +comment "common driver options" + depends on MEDIA_COMMON_OPTIONS + +config VIDEO_CX2341X + tristate + +config VIDEO_BTCX + depends on PCI + tristate + +config VIDEO_TVEEPROM + tristate + depends on I2C + +config CYPRESS_FIRMWARE + tristate "Cypress firmware helper routines" + depends on USB + +source "drivers/media/common/b2c2/Kconfig" +source "drivers/media/common/saa7146/Kconfig" +source "drivers/media/common/siano/Kconfig" diff --git a/drivers/media/common/Makefile b/drivers/media/common/Makefile new file mode 100644 index 00000000..d208de3b --- /dev/null +++ b/drivers/media/common/Makefile @@ -0,0 +1,5 @@ +obj-y += b2c2/ saa7146/ siano/ +obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o +obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o +obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_CYPRESS_FIRMWARE) += cypress_firmware.o diff --git a/drivers/media/common/b2c2/Kconfig b/drivers/media/common/b2c2/Kconfig new file mode 100644 index 00000000..a8c6cdfa --- /dev/null +++ b/drivers/media/common/b2c2/Kconfig @@ -0,0 +1,23 @@ +config DVB_B2C2_FLEXCOP + tristate + depends on DVB_CORE && I2C + depends on DVB_B2C2_FLEXCOP_PCI || DVB_B2C2_FLEXCOP_USB + default y + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT + select DVB_BCM3510 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_ITD1000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_CX24113 if MEDIA_SUBDRV_AUTOSELECT + +# Selected via the PCI or USB flexcop drivers +config DVB_B2C2_FLEXCOP_DEBUG + bool diff --git a/drivers/media/common/b2c2/Makefile b/drivers/media/common/b2c2/Makefile new file mode 100644 index 00000000..24993a5b --- /dev/null +++ b/drivers/media/common/b2c2/Makefile @@ -0,0 +1,8 @@ +b2c2-flexcop-objs += flexcop.o flexcop-fe-tuner.o flexcop-i2c.o +b2c2-flexcop-objs += flexcop-sram.o flexcop-eeprom.o flexcop-misc.o +b2c2-flexcop-objs += flexcop-hw-filter.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o + +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners/ diff --git a/drivers/media/common/b2c2/flexcop-common.h b/drivers/media/common/b2c2/flexcop-common.h new file mode 100644 index 00000000..437912e4 --- /dev/null +++ b/drivers/media/common/b2c2/flexcop-common.h @@ -0,0 +1,185 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-common.h - common header file for device-specific source files + * see flexcop.c for copyright information + */ +#ifndef __FLEXCOP_COMMON_H__ +#define __FLEXCOP_COMMON_H__ + +#include +#include +#include + +#include "flexcop-reg.h" + +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_filter.h" +#include "dvb_net.h" +#include "dvb_frontend.h" + +#define FC_MAX_FEED 256 + +#ifndef FC_LOG_PREFIX +#warning please define a log prefix for your file, using a default one +#define FC_LOG_PREFIX "b2c2-undef" +#endif + +/* Steal from usb.h */ +#undef err +#define err(format, arg...) \ + printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg) +#undef info +#define info(format, arg...) \ + printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) \ + printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg) + +struct flexcop_dma { + struct pci_dev *pdev; + + u8 *cpu_addr0; + dma_addr_t dma_addr0; + u8 *cpu_addr1; + dma_addr_t dma_addr1; + u32 size; /* size of each address in bytes */ +}; + +struct flexcop_i2c_adapter { + struct flexcop_device *fc; + struct i2c_adapter i2c_adap; + + u8 no_base_addr; + flexcop_i2c_port_t port; +}; + +/* Control structure for data definitions that are common to + * the B2C2-based PCI and USB devices. + */ +struct flexcop_device { + /* general */ + struct device *dev; /* for firmware_class */ + +#define FC_STATE_DVB_INIT 0x01 +#define FC_STATE_I2C_INIT 0x02 +#define FC_STATE_FE_INIT 0x04 + int init_state; + + /* device information */ + int has_32_hw_pid_filter; + flexcop_revision_t rev; + flexcop_device_type_t dev_type; + flexcop_bus_t bus_type; + + /* dvb stuff */ + struct dvb_adapter dvb_adapter; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + int (*fe_sleep) (struct dvb_frontend *); + + struct flexcop_i2c_adapter fc_i2c_adap[3]; + struct mutex i2c_mutex; + struct module *owner; + + /* options and status */ + int extra_feedcount; + int feedcount; + int pid_filtering; + int fullts_streaming_state; + + /* bus specific callbacks */ + flexcop_ibi_value(*read_ibi_reg) (struct flexcop_device *, + flexcop_ibi_register); + int (*write_ibi_reg) (struct flexcop_device *, + flexcop_ibi_register, flexcop_ibi_value); + int (*i2c_request) (struct flexcop_i2c_adapter *, + flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); + int (*stream_control) (struct flexcop_device *, int); + int (*get_mac_addr) (struct flexcop_device *fc, int extended); + void *bus_specific; +}; + +/* exported prototypes */ + +/* from flexcop.c */ +void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len); +void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no); + +struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len); +void flexcop_device_kfree(struct flexcop_device *); + +int flexcop_device_initialize(struct flexcop_device *); +void flexcop_device_exit(struct flexcop_device *fc); +void flexcop_reset_block_300(struct flexcop_device *fc); + +/* from flexcop-dma.c */ +int flexcop_dma_allocate(struct pci_dev *pdev, + struct flexcop_dma *dma, u32 size); +void flexcop_dma_free(struct flexcop_dma *dma); + +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, int onoff); +int flexcop_dma_control_size_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, int onoff); +int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, + flexcop_dma_index_t dma_idx); +int flexcop_dma_xfer_control(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, + int onoff); +int flexcop_dma_config_timer(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, u8 cycles); + +/* from flexcop-eeprom.c */ +/* the PCI part uses this call to get the MAC address, the USB part has its own */ +int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended); + +/* from flexcop-i2c.c */ +/* the PCI part uses this a i2c_request callback, whereas the usb part has its own + * one. We have it in flexcop-i2c.c, because it is going via the actual + * I2C-channel of the flexcop. + */ +int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t, + u8 chipaddr, u8 addr, u8 *buf, u16 len); + +/* from flexcop-sram.c */ +int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, + flexcop_sram_dest_target_t target); +void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s); +void flexcop_sram_ctrl(struct flexcop_device *fc, + int usb_wan, int sramdma, int maximumfill); + +/* global prototypes for the flexcop-chip */ +/* from flexcop-fe-tuner.c */ +int flexcop_frontend_init(struct flexcop_device *fc); +void flexcop_frontend_exit(struct flexcop_device *fc); + +/* from flexcop-i2c.c */ +int flexcop_i2c_init(struct flexcop_device *fc); +void flexcop_i2c_exit(struct flexcop_device *fc); + +/* from flexcop-sram.c */ +int flexcop_sram_init(struct flexcop_device *fc); + +/* from flexcop-misc.c */ +void flexcop_determine_revision(struct flexcop_device *fc); +void flexcop_device_name(struct flexcop_device *fc, + const char *prefix, const char *suffix); +void flexcop_dump_reg(struct flexcop_device *fc, + flexcop_ibi_register reg, int num); + +/* from flexcop-hw-filter.c */ +int flexcop_pid_feed_control(struct flexcop_device *fc, + struct dvb_demux_feed *dvbdmxfeed, int onoff); +void flexcop_hw_filter_init(struct flexcop_device *fc); + +void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff); + +void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]); +void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff); + +#endif diff --git a/drivers/media/common/b2c2/flexcop-eeprom.c b/drivers/media/common/b2c2/flexcop-eeprom.c new file mode 100644 index 00000000..a25373a9 --- /dev/null +++ b/drivers/media/common/b2c2/flexcop-eeprom.c @@ -0,0 +1,147 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading) + * see flexcop.c for copyright information + */ +#include "flexcop.h" + +#if 0 +/*EEPROM (Skystar2 has one "24LC08B" chip on board) */ +static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len) +{ + return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len); +} + +static int eeprom_lrc_write(struct adapter *adapter, u32 addr, + u32 len, u8 *wbuf, u8 *rbuf, int retries) +{ +int i; + +for (i = 0; i < retries; i++) { + if (eeprom_write(adapter, addr, wbuf, len) == len) { + if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1) + return 1; + } + } + return 0; +} + +/* These functions could be used to unlock SkyStar2 cards. */ + +static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len) +{ + u8 rbuf[20]; + u8 wbuf[20]; + + if (len != 16) + return 0; + + memcpy(wbuf, key, len); + wbuf[16] = 0; + wbuf[17] = 0; + wbuf[18] = 0; + wbuf[19] = calc_lrc(wbuf, 19); + return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4); +} + +static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len) +{ + u8 buf[20]; + + if (len != 16) + return 0; + + if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0) + return 0; + + memcpy(key, buf, len); + return 1; +} + +static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac) +{ + u8 tmp[8]; + + if (type != 0) { + tmp[0] = mac[0]; + tmp[1] = mac[1]; + tmp[2] = mac[2]; + tmp[3] = mac[5]; + tmp[4] = mac[6]; + tmp[5] = mac[7]; + } else { + tmp[0] = mac[0]; + tmp[1] = mac[1]; + tmp[2] = mac[2]; + tmp[3] = mac[3]; + tmp[4] = mac[4]; + tmp[5] = mac[5]; + } + + tmp[6] = 0; + tmp[7] = calc_lrc(tmp, 7); + + if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8) + return 1; + return 0; +} + +static int flexcop_eeprom_read(struct flexcop_device *fc, + u16 addr, u8 *buf, u16 len) +{ + return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len); +} + +#endif + +static u8 calc_lrc(u8 *buf, int len) +{ + int i; + u8 sum = 0; + for (i = 0; i < len; i++) + sum = sum ^ buf[i]; + return sum; +} + +static int flexcop_eeprom_request(struct flexcop_device *fc, + flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries) +{ + int i,ret = 0; + u8 chipaddr = 0x50 | ((addr >> 8) & 3); + for (i = 0; i < retries; i++) { + ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr, + addr & 0xff, buf, len); + if (ret == 0) + break; + } + return ret; +} + +static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, + u8 *buf, u16 len, int retries) +{ + int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries); + if (ret == 0) + if (calc_lrc(buf, len - 1) != buf[len - 1]) + ret = -EINVAL; + return ret; +} + +/* JJ's comment about extended == 1: it is not presently used anywhere but was + * added to the low-level functions for possible support of EUI64 */ +int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended) +{ + u8 buf[8]; + int ret = 0; + + if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) { + if (extended != 0) { + err("TODO: extended (EUI64) MAC addresses aren't " + "completely supported yet"); + ret = -EINVAL; + } else + memcpy(fc->dvb_adapter.proposed_mac,buf,6); + } + return ret; +} +EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr); diff --git a/drivers/media/common/b2c2/flexcop-fe-tuner.c b/drivers/media/common/b2c2/flexcop-fe-tuner.c new file mode 100644 index 00000000..7e14e90d --- /dev/null +++ b/drivers/media/common/b2c2/flexcop-fe-tuner.c @@ -0,0 +1,678 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling + * see flexcop.c for copyright information + */ +#include +#include "flexcop.h" +#include "mt312.h" +#include "stv0299.h" +#include "s5h1420.h" +#include "itd1000.h" +#include "cx24113.h" +#include "cx24123.h" +#include "isl6421.h" +#include "mt352.h" +#include "bcm3510.h" +#include "nxt200x.h" +#include "dvb-pll.h" +#include "lgdt330x.h" +#include "tuner-simple.h" +#include "stv0297.h" + + +/* Can we use the specified front-end? Remember that if we are compiled + * into the kernel we can't call code that's in modules. */ +#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \ + (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE))) + +/* lnb control */ +#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299) +static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct flexcop_device *fc = fe->dvb->priv; + flexcop_ibi_value v; + deb_tuner("polarity/voltage = %u\n", voltage); + + v = fc->read_ibi_reg(fc, misc_204); + switch (voltage) { + case SEC_VOLTAGE_OFF: + v.misc_204.ACPI1_sig = 1; + break; + case SEC_VOLTAGE_13: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 0; + break; + case SEC_VOLTAGE_18: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 1; + break; + default: + err("unknown SEC_VOLTAGE value"); + return -EINVAL; + } + return fc->write_ibi_reg(fc, misc_204, v); +} +#endif + +#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312) +static int flexcop_sleep(struct dvb_frontend* fe) +{ + struct flexcop_device *fc = fe->dvb->priv; + if (fc->fe_sleep) + return fc->fe_sleep(fe); + return 0; +} +#endif + +/* SkyStar2 DVB-S rev 2.3 */ +#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL) +static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ +/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ + struct flexcop_device *fc = fe->dvb->priv; + flexcop_ibi_value v; + u16 ax; + v.raw = 0; + deb_tuner("tone = %u\n",tone); + + switch (tone) { + case SEC_TONE_ON: + ax = 0x01ff; + break; + case SEC_TONE_OFF: + ax = 0; + break; + default: + err("unknown SEC_TONE value"); + return -EINVAL; + } + + v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ + v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; + v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; + return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); +} + +static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) +{ + flexcop_set_tone(fe, SEC_TONE_ON); + udelay(data ? 500 : 1000); + flexcop_set_tone(fe, SEC_TONE_OFF); + udelay(data ? 1000 : 500); +} + +static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) +{ + int i, par = 1, d; + for (i = 7; i >= 0; i--) { + d = (data >> i) & 1; + par ^= d; + flexcop_diseqc_send_bit(fe, d); + } + flexcop_diseqc_send_bit(fe, par); +} + +static int flexcop_send_diseqc_msg(struct dvb_frontend *fe, + int len, u8 *msg, unsigned long burst) +{ + int i; + + flexcop_set_tone(fe, SEC_TONE_OFF); + mdelay(16); + + for (i = 0; i < len; i++) + flexcop_diseqc_send_byte(fe,msg[i]); + mdelay(16); + + if (burst != -1) { + if (burst) + flexcop_diseqc_send_byte(fe, 0xff); + else { + flexcop_set_tone(fe, SEC_TONE_ON); + mdelay(12); + udelay(500); + flexcop_set_tone(fe, SEC_TONE_OFF); + } + msleep(20); + } + return 0; +} + +static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) +{ + return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); +} + +static int flexcop_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t minicmd) +{ + return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); +} + +static struct mt312_config skystar23_samsung_tbdu18132_config = { + .demod_address = 0x0e, +}; + +static int skystar2_rev23_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + struct dvb_frontend_ops *ops; + + fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c); + if (!fc->fe) + return 0; + + if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c, + DVB_PLL_SAMSUNG_TBDU18132)) + return 0; + + ops = &fc->fe->ops; + ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; + ops->diseqc_send_burst = flexcop_diseqc_send_burst; + ops->set_tone = flexcop_set_tone; + ops->set_voltage = flexcop_set_voltage; + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + return 1; +} +#else +#define skystar2_rev23_attach NULL +#endif + +/* SkyStar2 DVB-S rev 2.6 */ +#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL) +static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; bclk = 0x51; + } + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); + return 0; +} + +static u8 samsung_tbmu24112_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7D, + 0x05, 0x35, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0xC3, + 0x0C, 0x00, + 0x0D, 0x81, + 0x0E, 0x23, + 0x0F, 0x12, + 0x10, 0x7E, + 0x11, 0x84, + 0x12, 0xB9, + 0x13, 0x88, + 0x14, 0x89, + 0x15, 0xC9, + 0x16, 0x00, + 0x17, 0x5C, + 0x18, 0x00, + 0x19, 0x00, + 0x1A, 0x00, + 0x1C, 0x00, + 0x1D, 0x00, + 0x1E, 0x00, + 0x1F, 0x3A, + 0x20, 0x2E, + 0x21, 0x80, + 0x22, 0xFF, + 0x23, 0xC1, + 0x28, 0x00, + 0x29, 0x1E, + 0x2A, 0x14, + 0x2B, 0x0F, + 0x2C, 0x09, + 0x2D, 0x05, + 0x31, 0x1F, + 0x32, 0x19, + 0x33, 0xFE, + 0x34, 0x93, + 0xff, 0xff, +}; + +static struct stv0299_config samsung_tbmu24112_config = { + .demod_address = 0x68, + .inittab = samsung_tbmu24112_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_LK, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, +}; + +static int skystar2_rev26_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); + if (!fc->fe) + return 0; + + if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c, + DVB_PLL_SAMSUNG_TBMU24112)) + return 0; + + fc->fe->ops.set_voltage = flexcop_set_voltage; + fc->fe_sleep = fc->fe->ops.sleep; + fc->fe->ops.sleep = flexcop_sleep; + return 1; + +} +#else +#define skystar2_rev26_attach NULL +#endif + +/* SkyStar2 DVB-S rev 2.7 */ +#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000) +static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { + .demod_address = 0x53, + .invert = 1, + .repeated_start_workaround = 1, + .serial_mpeg = 1, +}; + +static struct itd1000_config skystar2_rev2_7_itd1000_config = { + .i2c_address = 0x61, +}; + +static int skystar2_rev27_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + flexcop_ibi_value r108; + struct i2c_adapter *i2c_tuner; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[0].no_base_addr = 1; + fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, + i2c); + if (!fc->fe) + goto fail; + + i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); + if (!i2c_tuner) + goto fail; + + fc->fe_sleep = fc->fe->ops.sleep; + fc->fe->ops.sleep = flexcop_sleep; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[2].no_base_addr = 1; + if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, + 0x08, 1, 1, false)) { + err("ISL6421 could NOT be attached"); + goto fail_isl; + } + info("ISL6421 successfully attached"); + + /* the ITD1000 requires a lower i2c clock - is it a problem ? */ + r108.raw = 0x00000506; + fc->write_ibi_reg(fc, tw_sm_c_108, r108); + if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner, + &skystar2_rev2_7_itd1000_config)) { + err("ITD1000 could NOT be attached"); + /* Should i2c clock be restored? */ + goto fail_isl; + } + info("ITD1000 successfully attached"); + + return 1; + +fail_isl: + fc->fc_i2c_adap[2].no_base_addr = 0; +fail: + /* for the next devices we need it again */ + fc->fc_i2c_adap[0].no_base_addr = 0; + return 0; +} +#else +#define skystar2_rev27_attach NULL +#endif + +/* SkyStar2 rev 2.8 */ +#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113) +static struct cx24123_config skystar2_rev2_8_cx24123_config = { + .demod_address = 0x55, + .dont_use_pll = 1, + .agc_callback = cx24113_agc_callback, +}; + +static const struct cx24113_config skystar2_rev2_8_cx24113_config = { + .i2c_addr = 0x54, + .xtal_khz = 10111, +}; + +static int skystar2_rev28_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + struct i2c_adapter *i2c_tuner; + + fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config, + i2c); + if (!fc->fe) + return 0; + + i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe); + if (!i2c_tuner) + return 0; + + if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config, + i2c_tuner)) { + err("CX24113 could NOT be attached"); + return 0; + } + info("CX24113 successfully attached"); + + fc->fc_i2c_adap[2].no_base_addr = 1; + if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, + 0x08, 0, 0, false)) { + err("ISL6421 could NOT be attached"); + fc->fc_i2c_adap[2].no_base_addr = 0; + return 0; + } + info("ISL6421 successfully attached"); + /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an + * IR-receiver (PIC16F818) - but the card has no input for that ??? */ + return 1; +} +#else +#define skystar2_rev28_attach NULL +#endif + +/* AirStar DVB-T */ +#if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL) +static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) +{ + static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d }; + static u8 mt352_reset[] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 }; + static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); + return 0; +} + +static struct mt352_config samsung_tdtc9251dh0_config = { + .demod_address = 0x0f, + .demod_init = samsung_tdtc9251dh0_demod_init, +}; + +static int airstar_dvbt_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); + if (!fc->fe) + return 0; + + return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, + DVB_PLL_SAMSUNG_TDTC9251DH0); +} +#else +#define airstar_dvbt_attach NULL +#endif + +/* AirStar ATSC 1st generation */ +#if FE_SUPPORTED(BCM3510) +static int flexcop_fe_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char* name) +{ + struct flexcop_device *fc = fe->dvb->priv; + return request_firmware(fw, name, fc->dev); +} + +static struct bcm3510_config air2pc_atsc_first_gen_config = { + .demod_address = 0x0f, + .request_firmware = flexcop_fe_request_firmware, +}; + +static int airstar_atsc1_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); + return fc->fe != NULL; +} +#else +#define airstar_atsc1_attach NULL +#endif + +/* AirStar ATSC 2nd generation */ +#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL) +static struct nxt200x_config samsung_tbmv_config = { + .demod_address = 0x0a, +}; + +static int airstar_atsc2_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); + if (!fc->fe) + return 0; + + return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, + DVB_PLL_SAMSUNG_TBMV); +} +#else +#define airstar_atsc2_attach NULL +#endif + +/* AirStar ATSC 3rd generation */ +#if FE_SUPPORTED(LGDT330X) +static struct lgdt330x_config air2pc_atsc_hd5000_config = { + .demod_address = 0x59, + .demod_chip = LGDT3303, + .serial_mpeg = 0x04, + .clock_polarity_flip = 1, +}; + +static int airstar_atsc3_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); + if (!fc->fe) + return 0; + + return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, + TUNER_LG_TDVS_H06XF); +} +#else +#define airstar_atsc3_attach NULL +#endif + +/* CableStar2 DVB-C */ +#if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL) +static u8 alps_tdee4_stv0297_inittab[] = { + 0x80, 0x01, + 0x80, 0x00, + 0x81, 0x01, + 0x81, 0x00, + 0x00, 0x48, + 0x01, 0x58, + 0x03, 0x00, + 0x04, 0x00, + 0x07, 0x00, + 0x08, 0x00, + 0x30, 0xff, + 0x31, 0x9d, + 0x32, 0xff, + 0x33, 0x00, + 0x34, 0x29, + 0x35, 0x55, + 0x36, 0x80, + 0x37, 0x6e, + 0x38, 0x9c, + 0x40, 0x1a, + 0x41, 0xfe, + 0x42, 0x33, + 0x43, 0x00, + 0x44, 0xff, + 0x45, 0x00, + 0x46, 0x00, + 0x49, 0x04, + 0x4a, 0x51, + 0x4b, 0xf8, + 0x52, 0x30, + 0x53, 0x06, + 0x59, 0x06, + 0x5a, 0x5e, + 0x5b, 0x04, + 0x61, 0x49, + 0x62, 0x0a, + 0x70, 0xff, + 0x71, 0x04, + 0x72, 0x00, + 0x73, 0x00, + 0x74, 0x0c, + 0x80, 0x20, + 0x81, 0x00, + 0x82, 0x30, + 0x83, 0x00, + 0x84, 0x04, + 0x85, 0x22, + 0x86, 0x08, + 0x87, 0x1b, + 0x88, 0x00, + 0x89, 0x00, + 0x90, 0x00, + 0x91, 0x04, + 0xa0, 0x86, + 0xa1, 0x00, + 0xa2, 0x00, + 0xb0, 0x91, + 0xb1, 0x0b, + 0xc0, 0x5b, + 0xc1, 0x10, + 0xc2, 0x12, + 0xd0, 0x02, + 0xd1, 0x00, + 0xd2, 0x00, + 0xd3, 0x00, + 0xd4, 0x02, + 0xd5, 0x00, + 0xde, 0x00, + 0xdf, 0x01, + 0xff, 0xff, +}; + +static struct stv0297_config alps_tdee4_stv0297_config = { + .demod_address = 0x1c, + .inittab = alps_tdee4_stv0297_inittab, +}; + +static int cablestar2_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fc_i2c_adap[0].no_base_addr = 1; + fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); + if (!fc->fe) + goto fail; + + /* This tuner doesn't use the stv0297's I2C gate, but instead the + * tuner is connected to a different flexcop I2C adapter. */ + if (fc->fe->ops.i2c_gate_ctrl) + fc->fe->ops.i2c_gate_ctrl(fc->fe, 0); + fc->fe->ops.i2c_gate_ctrl = NULL; + + if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, + &fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4)) + goto fail; + + return 1; + +fail: + /* Reset for next frontend to try */ + fc->fc_i2c_adap[0].no_base_addr = 0; + return 0; +} +#else +#define cablestar2_attach NULL +#endif + +static struct { + flexcop_device_type_t type; + int (*attach)(struct flexcop_device *, struct i2c_adapter *); +} flexcop_frontends[] = { + { FC_SKY_REV27, skystar2_rev27_attach }, + { FC_SKY_REV28, skystar2_rev28_attach }, + { FC_SKY_REV26, skystar2_rev26_attach }, + { FC_AIR_DVBT, airstar_dvbt_attach }, + { FC_AIR_ATSC2, airstar_atsc2_attach }, + { FC_AIR_ATSC3, airstar_atsc3_attach }, + { FC_AIR_ATSC1, airstar_atsc1_attach }, + { FC_CABLE, cablestar2_attach }, + { FC_SKY_REV23, skystar2_rev23_attach }, +}; + +/* try to figure out the frontend */ +int flexcop_frontend_init(struct flexcop_device *fc) +{ + int i; + for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) { + if (!flexcop_frontends[i].attach) + continue; + /* type needs to be set before, because of some workarounds + * done based on the probed card type */ + fc->dev_type = flexcop_frontends[i].type; + if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap)) + goto fe_found; + /* Clean up partially attached frontend */ + if (fc->fe) { + dvb_frontend_detach(fc->fe); + fc->fe = NULL; + } + } + fc->dev_type = FC_UNK; + err("no frontend driver found for this B2C2/FlexCop adapter"); + return -ENODEV; + +fe_found: + info("found '%s' .", fc->fe->ops.info.name); + if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { + err("frontend registration failed!"); + dvb_frontend_detach(fc->fe); + fc->fe = NULL; + return -EINVAL; + } + fc->init_state |= FC_STATE_FE_INIT; + return 0; +} + +void flexcop_frontend_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_FE_INIT) { + dvb_unregister_frontend(fc->fe); + dvb_frontend_detach(fc->fe); + } + fc->init_state &= ~FC_STATE_FE_INIT; +} diff --git a/drivers/media/common/b2c2/flexcop-hw-filter.c b/drivers/media/common/b2c2/flexcop-hw-filter.c new file mode 100644 index 00000000..77e45475 --- /dev/null +++ b/drivers/media/common/b2c2/flexcop-hw-filter.c @@ -0,0 +1,232 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-hw-filter.c - pid and mac address filtering and control functions + * see flexcop.c for copyright information + */ +#include "flexcop.h" + +static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208, Rcv_Data_sig, onoff); + deb_ts("rcv_data is now: '%s'\n", onoff ? "on" : "off"); +} + +void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208, SMC_Enable_sig, onoff); +} + +static void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208, Null_filter_sig, onoff); +} + +void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]) +{ + flexcop_ibi_value v418, v41c; + v41c = fc->read_ibi_reg(fc, mac_address_41c); + + v418.mac_address_418.MAC1 = mac[0]; + v418.mac_address_418.MAC2 = mac[1]; + v418.mac_address_418.MAC3 = mac[2]; + v418.mac_address_418.MAC6 = mac[3]; + v41c.mac_address_41c.MAC7 = mac[4]; + v41c.mac_address_41c.MAC8 = mac[5]; + + fc->write_ibi_reg(fc, mac_address_418, v418); + fc->write_ibi_reg(fc, mac_address_41c, v41c); +} + +void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208, MAC_filter_Mode_sig, onoff); +} + +static void flexcop_pid_group_filter(struct flexcop_device *fc, + u16 pid, u16 mask) +{ + /* index_reg_310.extra_index_reg need to 0 or 7 to work */ + flexcop_ibi_value v30c; + v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid; + v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask; + fc->write_ibi_reg(fc, pid_filter_30c, v30c); +} + +static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208, Mask_filter_sig, onoff); +} + +/* this fancy define reduces the code size of the quite similar PID controlling of + * the first 6 PIDs + */ + +#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \ + flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \ +v208 = fc->read_ibi_reg(fc, ctrl_208); \ +vpid.vregname.field = onoff ? pid : 0x1fff; \ +vpid.vregname.trans_field = transval; \ +v208.ctrl_208.enablefield = onoff; \ +fc->write_ibi_reg(fc, vregname, vpid); \ +fc->write_ibi_reg(fc, ctrl_208, v208); + +static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) +{ + pid_ctrl(pid_filter_300, Stream1_PID, Stream1_filter_sig, + Stream1_trans, 0); +} + +static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) +{ + pid_ctrl(pid_filter_300, Stream2_PID, Stream2_filter_sig, + Stream2_trans, 0); +} + +static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) +{ + pid_ctrl(pid_filter_304, PCR_PID, PCR_filter_sig, PCR_trans, 0); +} + +static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) +{ + pid_ctrl(pid_filter_304, PMT_PID, PMT_filter_sig, PMT_trans, 0); +} + +static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) +{ + pid_ctrl(pid_filter_308, EMM_PID, EMM_filter_sig, EMM_trans, 0); +} + +static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) +{ + pid_ctrl(pid_filter_308, ECM_PID, ECM_filter_sig, ECM_trans, 0); +} + +static void flexcop_pid_control(struct flexcop_device *fc, + int index, u16 pid, int onoff) +{ + if (pid == 0x2000) + return; + + deb_ts("setting pid: %5d %04x at index %d '%s'\n", + pid, pid, index, onoff ? "on" : "off"); + + /* We could use bit magic here to reduce source code size. + * I decided against it, but to use the real register names */ + switch (index) { + case 0: + flexcop_pid_Stream1_PID_ctrl(fc, pid, onoff); + break; + case 1: + flexcop_pid_Stream2_PID_ctrl(fc, pid, onoff); + break; + case 2: + flexcop_pid_PCR_PID_ctrl(fc, pid, onoff); + break; + case 3: + flexcop_pid_PMT_PID_ctrl(fc, pid, onoff); + break; + case 4: + flexcop_pid_EMM_PID_ctrl(fc, pid, onoff); + break; + case 5: + flexcop_pid_ECM_PID_ctrl(fc, pid, onoff); + break; + default: + if (fc->has_32_hw_pid_filter && index < 38) { + flexcop_ibi_value vpid, vid; + + /* set the index */ + vid = fc->read_ibi_reg(fc, index_reg_310); + vid.index_reg_310.index_reg = index - 6; + fc->write_ibi_reg(fc, index_reg_310, vid); + + vpid = fc->read_ibi_reg(fc, pid_n_reg_314); + vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff; + vpid.pid_n_reg_314.PID_enable_bit = onoff; + fc->write_ibi_reg(fc, pid_n_reg_314, vpid); + } + break; + } +} + +static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc, int onoff) +{ + if (fc->fullts_streaming_state != onoff) { + deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling"); + flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff)); + flexcop_pid_group_filter_ctrl(fc, onoff); + fc->fullts_streaming_state = onoff; + } + return 0; +} + +int flexcop_pid_feed_control(struct flexcop_device *fc, + struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32; + + fc->feedcount += onoff ? 1 : -1; /* the number of PIDs/Feed currently requested */ + if (dvbdmxfeed->index >= max_pid_filter) + fc->extra_feedcount += onoff ? 1 : -1; + + /* toggle complete-TS-streaming when: + * - pid_filtering is not enabled and it is the first or last feed requested + * - pid_filtering is enabled, + * - but the number of requested feeds is exceeded + * - or the requested pid is 0x2000 */ + + if (!fc->pid_filtering && fc->feedcount == onoff) + flexcop_toggle_fullts_streaming(fc, onoff); + + if (fc->pid_filtering) { + flexcop_pid_control \ + (fc, dvbdmxfeed->index, dvbdmxfeed->pid, onoff); + + if (fc->extra_feedcount > 0) + flexcop_toggle_fullts_streaming(fc, 1); + else if (dvbdmxfeed->pid == 0x2000) + flexcop_toggle_fullts_streaming(fc, onoff); + else + flexcop_toggle_fullts_streaming(fc, 0); + } + + /* if it was the first or last feed request change the stream-status */ + if (fc->feedcount == onoff) { + flexcop_rcv_data_ctrl(fc, onoff); + if (fc->stream_control) /* device specific stream control */ + fc->stream_control(fc, onoff); + + /* feeding stopped -> reset the flexcop filter*/ + if (onoff == 0) { + flexcop_reset_block_300(fc); + flexcop_hw_filter_init(fc); + } + } + return 0; +} +EXPORT_SYMBOL(flexcop_pid_feed_control); + +void flexcop_hw_filter_init(struct flexcop_device *fc) +{ + int i; + flexcop_ibi_value v; + for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++) + flexcop_pid_control(fc, i, 0x1fff, 0); + + flexcop_pid_group_filter(fc, 0, 0x1fe0); + flexcop_pid_group_filter_ctrl(fc, 0); + + v = fc->read_ibi_reg(fc, pid_filter_308); + v.pid_filter_308.EMM_filter_4 = 1; + v.pid_filter_308.EMM_filter_6 = 0; + fc->write_ibi_reg(fc, pid_filter_308, v); + + flexcop_null_filter_ctrl(fc, 1); +} diff --git a/drivers/media/common/b2c2/flexcop-i2c.c b/drivers/media/common/b2c2/flexcop-i2c.c new file mode 100644 index 00000000..965d5eb3 --- /dev/null +++ b/drivers/media/common/b2c2/flexcop-i2c.c @@ -0,0 +1,288 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization + * see flexcop.c for copyright information + */ +#include "flexcop.h" + +#define FC_MAX_I2C_RETRIES 100000 + +static int flexcop_i2c_operation(struct flexcop_device *fc, + flexcop_ibi_value *r100) +{ + int i; + flexcop_ibi_value r; + + r100->tw_sm_c_100.working_start = 1; + deb_i2c("r100 before: %08x\n",r100->raw); + + fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero); + fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */ + + for (i = 0; i < FC_MAX_I2C_RETRIES; i++) { + r = fc->read_ibi_reg(fc, tw_sm_c_100); + + if (!r.tw_sm_c_100.no_base_addr_ack_error) { + if (r.tw_sm_c_100.st_done) { + *r100 = r; + deb_i2c("i2c success\n"); + return 0; + } + } else { + deb_i2c("suffering from an i2c ack_error\n"); + return -EREMOTEIO; + } + } + deb_i2c("tried %d times i2c operation, " + "never finished or too many ack errors.\n", i); + return -EREMOTEIO; +} + +static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, + flexcop_ibi_value r100, u8 *buf) +{ + flexcop_ibi_value r104; + int len = r100.tw_sm_c_100.total_bytes, + /* remember total_bytes is buflen-1 */ + ret; + + /* work-around to have CableStar2 and SkyStar2 rev 2.7 work + * correctly: + * + * the ITD1000 is behind an i2c-gate which closes automatically + * after an i2c-transaction the STV0297 needs 2 consecutive reads + * one with no_base_addr = 0 and one with 1 + * + * those two work-arounds are conflictin: we check for the card + * type, it is set when probing the ITD1000 */ + if (i2c->fc->dev_type == FC_SKY_REV27) + r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; + + ret = flexcop_i2c_operation(i2c->fc, &r100); + if (ret != 0) { + deb_i2c("Retrying operation\n"); + r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; + ret = flexcop_i2c_operation(i2c->fc, &r100); + } + if (ret != 0) { + deb_i2c("read failed. %d\n", ret); + return ret; + } + + buf[0] = r100.tw_sm_c_100.data1_reg; + + if (len > 0) { + r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104); + deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw); + + /* there is at least one more byte, otherwise we wouldn't be here */ + buf[1] = r104.tw_sm_c_104.data2_reg; + if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg; + if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg; + } + return 0; +} + +static int flexcop_i2c_write4(struct flexcop_device *fc, + flexcop_ibi_value r100, u8 *buf) +{ + flexcop_ibi_value r104; + int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */ + r104.raw = 0; + + /* there is at least one byte, otherwise we wouldn't be here */ + r100.tw_sm_c_100.data1_reg = buf[0]; + r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0; + r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0; + r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0; + + deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw); + + /* write the additional i2c data before doing the actual i2c operation */ + fc->write_ibi_reg(fc, tw_sm_c_104, r104); + return flexcop_i2c_operation(fc, &r100); +} + +int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, + flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) +{ + int ret; + +#ifdef DUMP_I2C_MESSAGES + int i; +#endif + + u16 bytes_to_transfer; + flexcop_ibi_value r100; + + deb_i2c("op = %d\n",op); + r100.raw = 0; + r100.tw_sm_c_100.chipaddr = chipaddr; + r100.tw_sm_c_100.twoWS_rw = op; + r100.tw_sm_c_100.twoWS_port_reg = i2c->port; + +#ifdef DUMP_I2C_MESSAGES + printk(KERN_DEBUG "%d ", i2c->port); + if (op == FC_READ) + printk("rd("); + else + printk("wr("); + printk("%02x): %02x ", chipaddr, addr); +#endif + + /* in that case addr is the only value -> + * we write it twice as baseaddr and val0 + * BBTI is doing it like that for ISL6421 at least */ + if (i2c->no_base_addr && len == 0 && op == FC_WRITE) { + buf = &addr; + len = 1; + } + + while (len != 0) { + bytes_to_transfer = len > 4 ? 4 : len; + + r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1; + r100.tw_sm_c_100.baseaddr = addr; + + if (op == FC_READ) + ret = flexcop_i2c_read4(i2c, r100, buf); + else + ret = flexcop_i2c_write4(i2c->fc, r100, buf); + +#ifdef DUMP_I2C_MESSAGES + for (i = 0; i < bytes_to_transfer; i++) + printk("%02x ", buf[i]); +#endif + + if (ret < 0) + return ret; + + buf += bytes_to_transfer; + addr += bytes_to_transfer; + len -= bytes_to_transfer; + } + +#ifdef DUMP_I2C_MESSAGES + printk("\n"); +#endif + + return 0; +} +/* exported for PCI i2c */ +EXPORT_SYMBOL(flexcop_i2c_request); + +/* master xfer callback for demodulator */ +static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) +{ + struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap); + int i, ret = 0; + + /* Some drivers use 1 byte or 0 byte reads as probes, which this + * driver doesn't support. These probes will always fail, so this + * hack makes them always succeed. If one knew how, it would of + * course be better to actually do the read. */ + if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1) + return 1; + + if (mutex_lock_interruptible(&i2c->fc->i2c_mutex)) + return -ERESTARTSYS; + + for (i = 0; i < num; i++) { + /* reading */ + if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) { + ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr, + msgs[i].buf[0], msgs[i+1].buf, + msgs[i+1].len); + i++; /* skip the following message */ + } else /* writing */ + ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr, + msgs[i].buf[0], &msgs[i].buf[1], + msgs[i].len - 1); + if (ret < 0) { + deb_i2c("i2c master_xfer failed"); + break; + } + } + + mutex_unlock(&i2c->fc->i2c_mutex); + + if (ret == 0) + ret = num; + return ret; +} + +static u32 flexcop_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm flexcop_algo = { + .master_xfer = flexcop_master_xfer, + .functionality = flexcop_i2c_func, +}; + +int flexcop_i2c_init(struct flexcop_device *fc) +{ + int ret; + mutex_init(&fc->i2c_mutex); + + fc->fc_i2c_adap[0].fc = fc; + fc->fc_i2c_adap[1].fc = fc; + fc->fc_i2c_adap[2].fc = fc; + fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD; + fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM; + fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER; + + strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod", + sizeof(fc->fc_i2c_adap[0].i2c_adap.name)); + strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom", + sizeof(fc->fc_i2c_adap[1].i2c_adap.name)); + strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner", + sizeof(fc->fc_i2c_adap[2].i2c_adap.name)); + + i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]); + i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]); + i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]); + + fc->fc_i2c_adap[0].i2c_adap.algo = + fc->fc_i2c_adap[1].i2c_adap.algo = + fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo; + fc->fc_i2c_adap[0].i2c_adap.algo_data = + fc->fc_i2c_adap[1].i2c_adap.algo_data = + fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL; + fc->fc_i2c_adap[0].i2c_adap.dev.parent = + fc->fc_i2c_adap[1].i2c_adap.dev.parent = + fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev; + + ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap); + if (ret < 0) + return ret; + + ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap); + if (ret < 0) + goto adap_1_failed; + + ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap); + if (ret < 0) + goto adap_2_failed; + + fc->init_state |= FC_STATE_I2C_INIT; + return 0; + +adap_2_failed: + i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); +adap_1_failed: + i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); + return ret; +} + +void flexcop_i2c_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_I2C_INIT) { + i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap); + i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); + i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); + } + fc->init_state &= ~FC_STATE_I2C_INIT; +} diff --git a/drivers/media/common/b2c2/flexcop-misc.c b/drivers/media/common/b2c2/flexcop-misc.c new file mode 100644 index 00000000..f06f3a90 --- /dev/null +++ b/drivers/media/common/b2c2/flexcop-misc.c @@ -0,0 +1,86 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-misc.c - miscellaneous functions + * see flexcop.c for copyright information + */ +#include "flexcop.h" + +void flexcop_determine_revision(struct flexcop_device *fc) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); + + switch (v.misc_204.Rev_N_sig_revision_hi) { + case 0x2: + deb_info("found a FlexCopII.\n"); + fc->rev = FLEXCOP_II; + break; + case 0x3: + deb_info("found a FlexCopIIb.\n"); + fc->rev = FLEXCOP_IIB; + break; + case 0x0: + deb_info("found a FlexCopIII.\n"); + fc->rev = FLEXCOP_III; + break; + default: + err("unknown FlexCop Revision: %x. Please report this to " + "linux-dvb@linuxtv.org.", + v.misc_204.Rev_N_sig_revision_hi); + break; + } + + if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps)) + deb_info("this FlexCop has " + "the additional 32 hardware pid filter.\n"); + else + deb_info("this FlexCop has " + "the 6 basic main hardware pid filter.\n"); + /* bus parts have to decide if hw pid filtering is used or not. */ +} + +static const char *flexcop_revision_names[] = { + "Unknown chip", + "FlexCopII", + "FlexCopIIb", + "FlexCopIII", +}; + +static const char *flexcop_device_names[] = { + [FC_UNK] = "Unknown device", + [FC_CABLE] = "Cable2PC/CableStar 2 DVB-C", + [FC_AIR_DVBT] = "Air2PC/AirStar 2 DVB-T", + [FC_AIR_ATSC1] = "Air2PC/AirStar 2 ATSC 1st generation", + [FC_AIR_ATSC2] = "Air2PC/AirStar 2 ATSC 2nd generation", + [FC_AIR_ATSC3] = "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)", + [FC_SKY_REV23] = "Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)", + [FC_SKY_REV26] = "Sky2PC/SkyStar 2 DVB-S rev 2.6", + [FC_SKY_REV27] = "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u", + [FC_SKY_REV28] = "Sky2PC/SkyStar 2 DVB-S rev 2.8", +}; + +static const char *flexcop_bus_names[] = { + "USB", + "PCI", +}; + +void flexcop_device_name(struct flexcop_device *fc, + const char *prefix, const char *suffix) +{ + info("%s '%s' at the '%s' bus controlled by a '%s' %s", + prefix, flexcop_device_names[fc->dev_type], + flexcop_bus_names[fc->bus_type], + flexcop_revision_names[fc->rev], suffix); +} + +void flexcop_dump_reg(struct flexcop_device *fc, + flexcop_ibi_register reg, int num) +{ + flexcop_ibi_value v; + int i; + for (i = 0; i < num; i++) { + v = fc->read_ibi_reg(fc, reg+4*i); + deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw); + } + deb_rdump("\n"); +} +EXPORT_SYMBOL(flexcop_dump_reg); diff --git a/drivers/media/common/b2c2/flexcop-reg.h b/drivers/media/common/b2c2/flexcop-reg.h new file mode 100644 index 00000000..dc4528dc --- /dev/null +++ b/drivers/media/common/b2c2/flexcop-reg.h @@ -0,0 +1,166 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII + * see flexcop.c for copyright information + */ +#ifndef __FLEXCOP_REG_H__ +#define __FLEXCOP_REG_H__ + +typedef enum { + FLEXCOP_UNK = 0, + FLEXCOP_II, + FLEXCOP_IIB, + FLEXCOP_III, +} flexcop_revision_t; + +typedef enum { + FC_UNK = 0, + FC_CABLE, + FC_AIR_DVBT, + FC_AIR_ATSC1, + FC_AIR_ATSC2, + FC_AIR_ATSC3, + FC_SKY_REV23, + FC_SKY_REV26, + FC_SKY_REV27, + FC_SKY_REV28, +} flexcop_device_type_t; + +typedef enum { + FC_USB = 0, + FC_PCI, +} flexcop_bus_t; + +/* FlexCop IBI Registers */ +#if defined(__LITTLE_ENDIAN) +#include "flexcop_ibi_value_le.h" +#else +#if defined(__BIG_ENDIAN) +#include "flexcop_ibi_value_be.h" +#else +#error no endian defined +#endif +#endif + +#define fc_data_Tag_ID_DVB 0x3e +#define fc_data_Tag_ID_ATSC 0x3f +#define fc_data_Tag_ID_IDSB 0x8b + +#define fc_key_code_default 0x1 +#define fc_key_code_even 0x2 +#define fc_key_code_odd 0x3 + +extern flexcop_ibi_value ibi_zero; + +typedef enum { + FC_I2C_PORT_DEMOD = 1, + FC_I2C_PORT_EEPROM = 2, + FC_I2C_PORT_TUNER = 3, +} flexcop_i2c_port_t; + +typedef enum { + FC_WRITE = 0, + FC_READ = 1, +} flexcop_access_op_t; + +typedef enum { + FC_SRAM_DEST_NET = 1, + FC_SRAM_DEST_CAI = 2, + FC_SRAM_DEST_CAO = 4, + FC_SRAM_DEST_MEDIA = 8 +} flexcop_sram_dest_t; + +typedef enum { + FC_SRAM_DEST_TARGET_WAN_USB = 0, + FC_SRAM_DEST_TARGET_DMA1 = 1, + FC_SRAM_DEST_TARGET_DMA2 = 2, + FC_SRAM_DEST_TARGET_FC3_CA = 3 +} flexcop_sram_dest_target_t; + +typedef enum { + FC_SRAM_2_32KB = 0, /* 64KB */ + FC_SRAM_1_32KB = 1, /* 32KB - default fow FCII */ + FC_SRAM_1_128KB = 2, /* 128KB */ + FC_SRAM_1_48KB = 3, /* 48KB - default for FCIII */ +} flexcop_sram_type_t; + +typedef enum { + FC_WAN_SPEED_4MBITS = 0, + FC_WAN_SPEED_8MBITS = 1, + FC_WAN_SPEED_12MBITS = 2, + FC_WAN_SPEED_16MBITS = 3, +} flexcop_wan_speed_t; + +typedef enum { + FC_DMA_1 = 1, + FC_DMA_2 = 2, +} flexcop_dma_index_t; + +typedef enum { + FC_DMA_SUBADDR_0 = 1, + FC_DMA_SUBADDR_1 = 2, +} flexcop_dma_addr_index_t; + +/* names of the particular registers */ +typedef enum { + dma1_000 = 0x000, + dma1_004 = 0x004, + dma1_008 = 0x008, + dma1_00c = 0x00c, + dma2_010 = 0x010, + dma2_014 = 0x014, + dma2_018 = 0x018, + dma2_01c = 0x01c, + + tw_sm_c_100 = 0x100, + tw_sm_c_104 = 0x104, + tw_sm_c_108 = 0x108, + tw_sm_c_10c = 0x10c, + tw_sm_c_110 = 0x110, + + lnb_switch_freq_200 = 0x200, + misc_204 = 0x204, + ctrl_208 = 0x208, + irq_20c = 0x20c, + sw_reset_210 = 0x210, + misc_214 = 0x214, + mbox_v8_to_host_218 = 0x218, + mbox_host_to_v8_21c = 0x21c, + + pid_filter_300 = 0x300, + pid_filter_304 = 0x304, + pid_filter_308 = 0x308, + pid_filter_30c = 0x30c, + index_reg_310 = 0x310, + pid_n_reg_314 = 0x314, + mac_low_reg_318 = 0x318, + mac_high_reg_31c = 0x31c, + + data_tag_400 = 0x400, + card_id_408 = 0x408, + card_id_40c = 0x40c, + mac_address_418 = 0x418, + mac_address_41c = 0x41c, + + ci_600 = 0x600, + pi_604 = 0x604, + pi_608 = 0x608, + dvb_reg_60c = 0x60c, + + sram_ctrl_reg_700 = 0x700, + net_buf_reg_704 = 0x704, + cai_buf_reg_708 = 0x708, + cao_buf_reg_70c = 0x70c, + media_buf_reg_710 = 0x710, + sram_dest_reg_714 = 0x714, + net_buf_reg_718 = 0x718, + wan_ctrl_reg_71c = 0x71c, +} flexcop_ibi_register; + +#define flexcop_set_ibi_value(reg,attr,val) { \ + flexcop_ibi_value v = fc->read_ibi_reg(fc,reg); \ + v.reg.attr = val; \ + fc->write_ibi_reg(fc,reg,v); \ +} + +#endif diff --git a/drivers/media/common/b2c2/flexcop-sram.c b/drivers/media/common/b2c2/flexcop-sram.c new file mode 100644 index 00000000..f2199e43 --- /dev/null +++ b/drivers/media/common/b2c2/flexcop-sram.c @@ -0,0 +1,363 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-sram.c - functions for controlling the SRAM + * see flexcop.c for copyright information + */ +#include "flexcop.h" + +static void flexcop_sram_set_chip(struct flexcop_device *fc, + flexcop_sram_type_t type) +{ + flexcop_set_ibi_value(wan_ctrl_reg_71c, sram_chip, type); +} + +int flexcop_sram_init(struct flexcop_device *fc) +{ + switch (fc->rev) { + case FLEXCOP_II: + case FLEXCOP_IIB: + flexcop_sram_set_chip(fc, FC_SRAM_1_32KB); + break; + case FLEXCOP_III: + flexcop_sram_set_chip(fc, FC_SRAM_1_48KB); + break; + default: + return -EINVAL; + } + return 0; +} + +int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, + flexcop_sram_dest_target_t target) +{ + flexcop_ibi_value v; + v = fc->read_ibi_reg(fc, sram_dest_reg_714); + + if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) { + err("SRAM destination target to available on FlexCopII(b)\n"); + return -EINVAL; + } + deb_sram("sram dest: %x target: %x\n", dest, target); + + if (dest & FC_SRAM_DEST_NET) + v.sram_dest_reg_714.NET_Dest = target; + if (dest & FC_SRAM_DEST_CAI) + v.sram_dest_reg_714.CAI_Dest = target; + if (dest & FC_SRAM_DEST_CAO) + v.sram_dest_reg_714.CAO_Dest = target; + if (dest & FC_SRAM_DEST_MEDIA) + v.sram_dest_reg_714.MEDIA_Dest = target; + + fc->write_ibi_reg(fc,sram_dest_reg_714,v); + udelay(1000); /* TODO delay really necessary */ + + return 0; +} +EXPORT_SYMBOL(flexcop_sram_set_dest); + +void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s) +{ + flexcop_set_ibi_value(wan_ctrl_reg_71c,wan_speed_sig,s); +} +EXPORT_SYMBOL(flexcop_wan_set_speed); + +void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714); + v.sram_dest_reg_714.ctrl_usb_wan = usb_wan; + v.sram_dest_reg_714.ctrl_sramdma = sramdma; + v.sram_dest_reg_714.ctrl_maximumfill = maximumfill; + fc->write_ibi_reg(fc,sram_dest_reg_714,v); +} +EXPORT_SYMBOL(flexcop_sram_ctrl); + +#if 0 +static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) +{ + int i, retries; + u32 command; + + for (i = 0; i < len; i++) { + command = bank | addr | 0x04000000 | (*buf << 0x10); + + retries = 2; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __func__); + + write_reg_dw(adapter, 0x700, command); + + buf++; + addr++; + } +} + +static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) +{ + int i, retries; + u32 command, value; + + for (i = 0; i < len; i++) { + command = bank | addr | 0x04008000; + + retries = 10000; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __func__); + + write_reg_dw(adapter, 0x700, command); + + retries = 10000; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __func__); + + value = read_reg_dw(adapter, 0x700) >> 0x10; + + *buf = (value & 0xff); + + addr++; + buf++; + } +} + +static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) +{ + u32 bank; + + bank = 0; + + if (adapter->dw_sram_type == 0x20000) { + bank = (addr & 0x18000) << 0x0d; + } + + if (adapter->dw_sram_type == 0x00000) { + if ((addr >> 0x0f) == 0) + bank = 0x20000000; + else + bank = 0x10000000; + } + flex_sram_write(adapter, bank, addr & 0x7fff, buf, len); +} + +static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) +{ + u32 bank; + bank = 0; + + if (adapter->dw_sram_type == 0x20000) { + bank = (addr & 0x18000) << 0x0d; + } + + if (adapter->dw_sram_type == 0x00000) { + if ((addr >> 0x0f) == 0) + bank = 0x20000000; + else + bank = 0x10000000; + } + flex_sram_read(adapter, bank, addr & 0x7fff, buf, len); +} + +static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len) +{ + u32 length; + while (len != 0) { + length = len; + /* check if the address range belongs to the same + * 32K memory chip. If not, the data is read + * from one chip at a time */ + if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { + length = (((addr >> 0x0f) + 1) << 0x0f) - addr; + } + + sram_read_chunk(adapter, addr, buf, length); + addr = addr + length; + buf = buf + length; + len = len - length; + } +} + +static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len) +{ + u32 length; + while (len != 0) { + length = len; + + /* check if the address range belongs to the same + * 32K memory chip. If not, the data is + * written to one chip at a time */ + if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { + length = (((addr >> 0x0f) + 1) << 0x0f) - addr; + } + + sram_write_chunk(adapter, addr, buf, length); + addr = addr + length; + buf = buf + length; + len = len - length; + } +} + +static void sram_set_size(struct adapter *adapter, u32 mask) +{ + write_reg_dw(adapter, 0x71c, + (mask | (~0x30000 & read_reg_dw(adapter, 0x71c)))); +} + +static void sram_init(struct adapter *adapter) +{ + u32 tmp; + tmp = read_reg_dw(adapter, 0x71c); + write_reg_dw(adapter, 0x71c, 1); + + if (read_reg_dw(adapter, 0x71c) != 0) { + write_reg_dw(adapter, 0x71c, tmp); + adapter->dw_sram_type = tmp & 0x30000; + ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type); + } else { + adapter->dw_sram_type = 0x10000; + ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type); + } +} + +static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) +{ + u8 tmp1, tmp2; + dprintk("%s: mask = %x, addr = %x\n", __func__, mask, addr); + + sram_set_size(adapter, mask); + sram_init(adapter); + + tmp2 = 0xa5; + tmp1 = 0x4f; + + sram_write(adapter, addr, &tmp2, 1); + sram_write(adapter, addr + 4, &tmp1, 1); + + tmp2 = 0; + mdelay(20); + + sram_read(adapter, addr, &tmp2, 1); + sram_read(adapter, addr, &tmp2, 1); + + dprintk("%s: wrote 0xa5, read 0x%2x\n", __func__, tmp2); + + if (tmp2 != 0xa5) + return 0; + + tmp2 = 0x5a; + tmp1 = 0xf4; + + sram_write(adapter, addr, &tmp2, 1); + sram_write(adapter, addr + 4, &tmp1, 1); + + tmp2 = 0; + mdelay(20); + + sram_read(adapter, addr, &tmp2, 1); + sram_read(adapter, addr, &tmp2, 1); + + dprintk("%s: wrote 0x5a, read 0x%2x\n", __func__, tmp2); + + if (tmp2 != 0x5a) + return 0; + return 1; +} + +static u32 sram_length(struct adapter *adapter) +{ + if (adapter->dw_sram_type == 0x10000) + return 32768; /* 32K */ + if (adapter->dw_sram_type == 0x00000) + return 65536; /* 64K */ + if (adapter->dw_sram_type == 0x20000) + return 131072; /* 128K */ + return 32768; /* 32K */ +} + +/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory. + - for 128K there are 4x32K chips at bank 0,1,2,3. + - for 64K there are 2x32K chips at bank 1,2. + - for 32K there is one 32K chip at bank 0. + + FlexCop works only with one bank at a time. The bank is selected + by bits 28-29 of the 0x700 register. + + bank 0 covers addresses 0x00000-0x07fff + bank 1 covers addresses 0x08000-0x0ffff + bank 2 covers addresses 0x10000-0x17fff + bank 3 covers addresses 0x18000-0x1ffff */ + +static int flexcop_sram_detect(struct flexcop_device *fc) +{ + flexcop_ibi_value r208, r71c_0, vr71c_1; + r208 = fc->read_ibi_reg(fc, ctrl_208); + fc->write_ibi_reg(fc, ctrl_208, ibi_zero); + + r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c); + write_reg_dw(adapter, 0x71c, 1); + tmp3 = read_reg_dw(adapter, 0x71c); + dprintk("%s: tmp3 = %x\n", __func__, tmp3); + write_reg_dw(adapter, 0x71c, tmp2); + + // check for internal SRAM ??? + tmp3--; + if (tmp3 != 0) { + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + dprintk("%s: sram size = 32K\n", __func__); + return 32; + } + + if (sram_test_location(adapter, 0x20000, 0x18000) != 0) { + sram_set_size(adapter, 0x20000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + dprintk("%s: sram size = 128K\n", __func__); + return 128; + } + + if (sram_test_location(adapter, 0x00000, 0x10000) != 0) { + sram_set_size(adapter, 0x00000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + dprintk("%s: sram size = 64K\n", __func__); + return 64; + } + + if (sram_test_location(adapter, 0x10000, 0x00000) != 0) { + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + dprintk("%s: sram size = 32K\n", __func__); + return 32; + } + + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + dprintk("%s: SRAM detection failed. Set to 32K \n", __func__); + return 0; +} + +static void sll_detect_sram_size(struct adapter *adapter) +{ + sram_detect_for_flex2(adapter); +} + +#endif diff --git a/drivers/media/common/b2c2/flexcop.c b/drivers/media/common/b2c2/flexcop.c new file mode 100644 index 00000000..412c5daf --- /dev/null +++ b/drivers/media/common/b2c2/flexcop.c @@ -0,0 +1,325 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop.c - main module part + * Copyright (C) 2004-9 Patrick Boettcher + * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc + * + * Acknowledgements: + * John Jurrius from BBTI, Inc. for extensive support + * with code examples and data books + * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) + * + * Contributions to the skystar2-driver have been done by + * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) + * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) + * Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu) + * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac + * filtering) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "flexcop.h" + +#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip" +#define DRIVER_AUTHOR "Patrick Boettcher demux->priv; + return flexcop_pid_feed_control(fc, dvbdmxfeed, 1); +} + +static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct flexcop_device *fc = dvbdmxfeed->demux->priv; + return flexcop_pid_feed_control(fc, dvbdmxfeed, 0); +} + +static int flexcop_dvb_init(struct flexcop_device *fc) +{ + int ret = dvb_register_adapter(&fc->dvb_adapter, + "FlexCop Digital TV device", fc->owner, + fc->dev, adapter_nr); + if (ret < 0) { + err("error registering DVB adapter"); + return ret; + } + fc->dvb_adapter.priv = fc; + + fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING + | DMX_MEMORY_BASED_FILTERING); + fc->demux.priv = fc; + fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; + fc->demux.start_feed = flexcop_dvb_start_feed; + fc->demux.stop_feed = flexcop_dvb_stop_feed; + fc->demux.write_to_decoder = NULL; + + ret = dvb_dmx_init(&fc->demux); + if (ret < 0) { + err("dvb_dmx failed: error %d", ret); + goto err_dmx; + } + + fc->hw_frontend.source = DMX_FRONTEND_0; + + fc->dmxdev.filternum = fc->demux.feednum; + fc->dmxdev.demux = &fc->demux.dmx; + fc->dmxdev.capabilities = 0; + ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter); + if (ret < 0) { + err("dvb_dmxdev_init failed: error %d", ret); + goto err_dmx_dev; + } + + ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend); + if (ret < 0) { + err("adding hw_frontend to dmx failed: error %d", ret); + goto err_dmx_add_hw_frontend; + } + + fc->mem_frontend.source = DMX_MEMORY_FE; + ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend); + if (ret < 0) { + err("adding mem_frontend to dmx failed: error %d", ret); + goto err_dmx_add_mem_frontend; + } + + ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend); + if (ret < 0) { + err("connect frontend failed: error %d", ret); + goto err_connect_frontend; + } + + ret = dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx); + if (ret < 0) { + err("dvb_net_init failed: error %d", ret); + goto err_net; + } + + fc->init_state |= FC_STATE_DVB_INIT; + return 0; + +err_net: + fc->demux.dmx.disconnect_frontend(&fc->demux.dmx); +err_connect_frontend: + fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend); +err_dmx_add_mem_frontend: + fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend); +err_dmx_add_hw_frontend: + dvb_dmxdev_release(&fc->dmxdev); +err_dmx_dev: + dvb_dmx_release(&fc->demux); +err_dmx: + dvb_unregister_adapter(&fc->dvb_adapter); + return ret; +} + +static void flexcop_dvb_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_DVB_INIT) { + dvb_net_release(&fc->dvbnet); + + fc->demux.dmx.close(&fc->demux.dmx); + fc->demux.dmx.remove_frontend(&fc->demux.dmx, + &fc->mem_frontend); + fc->demux.dmx.remove_frontend(&fc->demux.dmx, + &fc->hw_frontend); + dvb_dmxdev_release(&fc->dmxdev); + dvb_dmx_release(&fc->demux); + dvb_unregister_adapter(&fc->dvb_adapter); + deb_info("deinitialized dvb stuff\n"); + } + fc->init_state &= ~FC_STATE_DVB_INIT; +} + +/* these methods are necessary to achieve the long-term-goal of hiding the + * struct flexcop_device from the bus-parts */ +void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len) +{ + dvb_dmx_swfilter(&fc->demux, buf, len); +} +EXPORT_SYMBOL(flexcop_pass_dmx_data); + +void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no) +{ + dvb_dmx_swfilter_packets(&fc->demux, buf, no); +} +EXPORT_SYMBOL(flexcop_pass_dmx_packets); + +static void flexcop_reset(struct flexcop_device *fc) +{ + flexcop_ibi_value v210, v204; + + /* reset the flexcop itself */ + fc->write_ibi_reg(fc,ctrl_208,ibi_zero); + + v210.raw = 0; + v210.sw_reset_210.reset_block_000 = 1; + v210.sw_reset_210.reset_block_100 = 1; + v210.sw_reset_210.reset_block_200 = 1; + v210.sw_reset_210.reset_block_300 = 1; + v210.sw_reset_210.reset_block_400 = 1; + v210.sw_reset_210.reset_block_500 = 1; + v210.sw_reset_210.reset_block_600 = 1; + v210.sw_reset_210.reset_block_700 = 1; + v210.sw_reset_210.Block_reset_enable = 0xb2; + v210.sw_reset_210.Special_controls = 0xc259; + fc->write_ibi_reg(fc,sw_reset_210,v210); + msleep(1); + + /* reset the periphical devices */ + + v204 = fc->read_ibi_reg(fc,misc_204); + v204.misc_204.Per_reset_sig = 0; + fc->write_ibi_reg(fc,misc_204,v204); + msleep(1); + v204.misc_204.Per_reset_sig = 1; + fc->write_ibi_reg(fc,misc_204,v204); +} + +void flexcop_reset_block_300(struct flexcop_device *fc) +{ + flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208), + v210 = fc->read_ibi_reg(fc, sw_reset_210); + + deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw); + fc->write_ibi_reg(fc,ctrl_208,ibi_zero); + + v210.sw_reset_210.reset_block_300 = 1; + v210.sw_reset_210.Block_reset_enable = 0xb2; + + fc->write_ibi_reg(fc,sw_reset_210,v210); + fc->write_ibi_reg(fc,ctrl_208,v208_save); +} + +struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) +{ + void *bus; + struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), + GFP_KERNEL); + if (!fc) { + err("no memory"); + return NULL; + } + + bus = kzalloc(bus_specific_len, GFP_KERNEL); + if (!bus) { + err("no memory"); + kfree(fc); + return NULL; + } + + fc->bus_specific = bus; + + return fc; +} +EXPORT_SYMBOL(flexcop_device_kmalloc); + +void flexcop_device_kfree(struct flexcop_device *fc) +{ + kfree(fc->bus_specific); + kfree(fc); +} +EXPORT_SYMBOL(flexcop_device_kfree); + +int flexcop_device_initialize(struct flexcop_device *fc) +{ + int ret; + ibi_zero.raw = 0; + + flexcop_reset(fc); + flexcop_determine_revision(fc); + flexcop_sram_init(fc); + flexcop_hw_filter_init(fc); + flexcop_smc_ctrl(fc, 0); + + ret = flexcop_dvb_init(fc); + if (ret) + goto error; + + /* i2c has to be done before doing EEProm stuff - + * because the EEProm is accessed via i2c */ + ret = flexcop_i2c_init(fc); + if (ret) + goto error; + + /* do the MAC address reading after initializing the dvb_adapter */ + if (fc->get_mac_addr(fc, 0) == 0) { + u8 *b = fc->dvb_adapter.proposed_mac; + info("MAC address = %pM", b); + flexcop_set_mac_filter(fc,b); + flexcop_mac_filter_ctrl(fc,1); + } else + warn("reading of MAC address failed.\n"); + + ret = flexcop_frontend_init(fc); + if (ret) + goto error; + + flexcop_device_name(fc,"initialization of","complete"); + return 0; + +error: + flexcop_device_exit(fc); + return ret; +} +EXPORT_SYMBOL(flexcop_device_initialize); + +void flexcop_device_exit(struct flexcop_device *fc) +{ + flexcop_frontend_exit(fc); + flexcop_i2c_exit(fc); + flexcop_dvb_exit(fc); +} +EXPORT_SYMBOL(flexcop_device_exit); + +static int flexcop_module_init(void) +{ + info(DRIVER_NAME " loaded successfully"); + return 0; +} + +static void flexcop_module_cleanup(void) +{ + info(DRIVER_NAME " unloaded successfully"); +} + +module_init(flexcop_module_init); +module_exit(flexcop_module_cleanup); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/b2c2/flexcop.h b/drivers/media/common/b2c2/flexcop.h new file mode 100644 index 00000000..897b10c8 --- /dev/null +++ b/drivers/media/common/b2c2/flexcop.h @@ -0,0 +1,29 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop.h - private header file for all flexcop-chip-source files + * see flexcop.c for copyright information + */ +#ifndef __FLEXCOP_H__ +#define __FLEXCOP_H___ + +#define FC_LOG_PREFIX "b2c2-flexcop" +#include "flexcop-common.h" + +extern int b2c2_flexcop_debug; + +/* debug */ +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0) +#else +#define dprintk(level,args...) +#endif + +#define deb_info(args...) dprintk(0x01, args) +#define deb_tuner(args...) dprintk(0x02, args) +#define deb_i2c(args...) dprintk(0x04, args) +#define deb_ts(args...) dprintk(0x08, args) +#define deb_sram(args...) dprintk(0x10, args) +#define deb_rdump(args...) dprintk(0x20, args) + +#endif diff --git a/drivers/media/common/b2c2/flexcop_ibi_value_be.h b/drivers/media/common/b2c2/flexcop_ibi_value_be.h new file mode 100644 index 00000000..8f64bdbd --- /dev/null +++ b/drivers/media/common/b2c2/flexcop_ibi_value_be.h @@ -0,0 +1,455 @@ +/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * register descriptions + * see flexcop.c for copyright information + */ +/* This file is automatically generated, do not edit things here. */ +#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ +#define __FLEXCOP_IBI_VALUE_INCLUDED__ + +typedef union { + u32 raw; + + struct { + u32 dma_address0 :30; + u32 dma_0No_update : 1; + u32 dma_0start : 1; + } dma_0x0; + + struct { + u32 dma_addr_size :24; + u32 DMA_maxpackets : 8; + } dma_0x4_remap; + + struct { + u32 dma_addr_size :24; + u32 unused : 1; + u32 dma1timer : 7; + } dma_0x4_read; + + struct { + u32 dma_addr_size :24; + u32 dmatimer : 7; + u32 unused : 1; + } dma_0x4_write; + + struct { + u32 dma_cur_addr :30; + u32 unused : 2; + } dma_0x8; + + struct { + u32 dma_address1 :30; + u32 remap_enable : 1; + u32 dma_1start : 1; + } dma_0xc; + + struct { + u32 st_done : 1; + u32 no_base_addr_ack_error : 1; + u32 twoWS_port_reg : 2; + u32 total_bytes : 2; + u32 twoWS_rw : 1; + u32 working_start : 1; + u32 data1_reg : 8; + u32 baseaddr : 8; + u32 reserved1 : 1; + u32 chipaddr : 7; + } tw_sm_c_100; + + struct { + u32 unused : 6; + u32 force_stop : 1; + u32 exlicit_stops : 1; + u32 data4_reg : 8; + u32 data3_reg : 8; + u32 data2_reg : 8; + } tw_sm_c_104; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_108; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_10c; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_110; + + struct { + u32 LNB_CTLPrescaler_sig : 2; + u32 LNB_CTLLowCount_sig :15; + u32 LNB_CTLHighCount_sig :15; + } lnb_switch_freq_200; + + struct { + u32 Rev_N_sig_reserved2 : 1; + u32 Rev_N_sig_caps : 1; + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_revision_hi : 4; + u32 reserved :20; + u32 Per_reset_sig : 1; + u32 LNB_L_H_sig : 1; + u32 ACPI3_sig : 1; + u32 ACPI1_sig : 1; + } misc_204; + + struct { + u32 unused : 9; + u32 Mailbox_from_V8_Enable_sig : 1; + u32 DMA2_Size_IRQ_Enable_sig : 1; + u32 DMA1_Size_IRQ_Enable_sig : 1; + u32 DMA2_Timer_Enable_sig : 1; + u32 DMA2_IRQ_Enable_sig : 1; + u32 DMA1_Timer_Enable_sig : 1; + u32 DMA1_IRQ_Enable_sig : 1; + u32 Rcv_Data_sig : 1; + u32 MAC_filter_Mode_sig : 1; + u32 Multi2_Enable_sig : 1; + u32 Per_CA_Enable_sig : 1; + u32 SMC_Enable_sig : 1; + u32 CA_Enable_sig : 1; + u32 WAN_CA_Enable_sig : 1; + u32 WAN_Enable_sig : 1; + u32 Mask_filter_sig : 1; + u32 Null_filter_sig : 1; + u32 ECM_filter_sig : 1; + u32 EMM_filter_sig : 1; + u32 PMT_filter_sig : 1; + u32 PCR_filter_sig : 1; + u32 Stream2_filter_sig : 1; + u32 Stream1_filter_sig : 1; + } ctrl_208; + + struct { + u32 reserved :21; + u32 Transport_Error : 1; + u32 LLC_SNAP_FLAG_set : 1; + u32 Continuity_error_flag : 1; + u32 Data_receiver_error : 1; + u32 Mailbox_from_V8_Status_sig : 1; + u32 DMA2_Size_IRQ_Status : 1; + u32 DMA1_Size_IRQ_Status : 1; + u32 DMA2_Timer_Status : 1; + u32 DMA2_IRQ_Status : 1; + u32 DMA1_Timer_Status : 1; + u32 DMA1_IRQ_Status : 1; + } irq_20c; + + struct { + u32 Special_controls :16; + u32 Block_reset_enable : 8; + u32 reset_block_700 : 1; + u32 reset_block_600 : 1; + u32 reset_block_500 : 1; + u32 reset_block_400 : 1; + u32 reset_block_300 : 1; + u32 reset_block_200 : 1; + u32 reset_block_100 : 1; + u32 reset_block_000 : 1; + } sw_reset_210; + + struct { + u32 unused2 :20; + u32 polarity_PS_ERR_sig : 1; + u32 polarity_PS_SYNC_sig : 1; + u32 polarity_PS_VALID_sig : 1; + u32 polarity_PS_CLK_sig : 1; + u32 unused1 : 3; + u32 s2p_sel_sig : 1; + u32 section_pkg_enable_sig : 1; + u32 halt_V8_sig : 1; + u32 v2WS_oe_sig : 1; + u32 vuart_oe_sig : 1; + } misc_214; + + struct { + u32 Mailbox_from_V8 :32; + } mbox_v8_to_host_218; + + struct { + u32 sysramaccess_busmuster : 1; + u32 sysramaccess_write : 1; + u32 unused : 7; + u32 sysramaccess_addr :15; + u32 sysramaccess_data : 8; + } mbox_host_to_v8_21c; + + struct { + u32 debug_fifo_problem : 1; + u32 debug_flag_write_status00 : 1; + u32 Stream2_trans : 1; + u32 Stream2_PID :13; + u32 debug_flag_pid_saved : 1; + u32 MAC_Multicast_filter : 1; + u32 Stream1_trans : 1; + u32 Stream1_PID :13; + } pid_filter_300; + + struct { + u32 reserved : 2; + u32 PMT_trans : 1; + u32 PMT_PID :13; + u32 debug_overrun2 : 1; + u32 debug_overrun3 : 1; + u32 PCR_trans : 1; + u32 PCR_PID :13; + } pid_filter_304; + + struct { + u32 reserved : 2; + u32 ECM_trans : 1; + u32 ECM_PID :13; + u32 EMM_filter_6 : 1; + u32 EMM_filter_4 : 1; + u32 EMM_trans : 1; + u32 EMM_PID :13; + } pid_filter_308; + + struct { + u32 unused2 : 3; + u32 Group_mask :13; + u32 unused1 : 2; + u32 Group_trans : 1; + u32 Group_PID :13; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 unused :15; + u32 net_master_read :17; + } pid_filter_30c_ext_ind_1; + + struct { + u32 unused :15; + u32 net_master_write :17; + } pid_filter_30c_ext_ind_2; + + struct { + u32 unused :15; + u32 next_net_master_write :17; + } pid_filter_30c_ext_ind_3; + + struct { + u32 reserved2 : 5; + u32 stack_read :10; + u32 reserved1 : 6; + u32 state_write :10; + u32 unused1 : 1; + } pid_filter_30c_ext_ind_4; + + struct { + u32 unused :22; + u32 stack_cnt :10; + } pid_filter_30c_ext_ind_5; + + struct { + u32 unused : 4; + u32 data_size_reg :12; + u32 write_status4 : 2; + u32 write_status1 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg0 : 2; + } pid_filter_30c_ext_ind_6; + + struct { + u32 unused :22; + u32 pass_alltables : 1; + u32 AB_select : 1; + u32 extra_index_reg : 3; + u32 index_reg : 5; + } index_reg_310; + + struct { + u32 reserved :17; + u32 PID_enable_bit : 1; + u32 PID_trans : 1; + u32 PID :13; + } pid_n_reg_314; + + struct { + u32 reserved : 6; + u32 HighAB_bit : 1; + u32 Enable_bit : 1; + u32 A6_byte : 8; + u32 A5_byte : 8; + u32 A4_byte : 8; + } mac_low_reg_318; + + struct { + u32 reserved : 8; + u32 A3_byte : 8; + u32 A2_byte : 8; + u32 A1_byte : 8; + } mac_high_reg_31c; + + struct { + u32 data_Tag_ID :16; + u32 reserved :16; + } data_tag_400; + + struct { + u32 Card_IDbyte3 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte6 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte1 : 8; + u32 Card_IDbyte2 : 8; + } card_id_40c; + + struct { + u32 MAC6 : 8; + u32 MAC3 : 8; + u32 MAC2 : 8; + u32 MAC1 : 8; + } mac_address_418; + + struct { + u32 reserved :16; + u32 MAC8 : 8; + u32 MAC7 : 8; + } mac_address_41c; + + struct { + u32 reserved :21; + u32 txbuffempty : 1; + u32 ReceiveByteFrameError : 1; + u32 ReceiveDataReady : 1; + u32 transmitter_data_byte : 8; + } ci_600; + + struct { + u32 pi_component_reg : 3; + u32 pi_rw : 1; + u32 pi_ha :20; + u32 pi_d : 8; + } pi_604; + + struct { + u32 pi_busy_n : 1; + u32 pi_wait_n : 1; + u32 pi_timeout_status : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 config_cclk : 1; + u32 config_cs_n : 1; + u32 config_wr_n : 1; + u32 config_Prog_n : 1; + u32 config_Init_stat : 1; + u32 config_Done_stat : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 pcmcia_a_mod_pwr_n : 1; + u32 reserved : 3; + u32 Timer_addr : 5; + u32 unused : 1; + u32 timer_data : 7; + u32 Timer_Load_req : 1; + u32 Timer_Read_req : 1; + u32 oncecycle_read : 1; + u32 serialReset : 1; + } pi_608; + + struct { + u32 reserved : 6; + u32 rw_flag : 1; + u32 dvb_en : 1; + u32 key_array_row : 5; + u32 key_array_col : 3; + u32 key_code : 2; + u32 key_enable : 1; + u32 PID :13; + } dvb_reg_60c; + + struct { + u32 start_sram_ibi : 1; + u32 reserved2 : 1; + u32 ce_pin_reg : 1; + u32 oe_pin_reg : 1; + u32 reserved1 : 3; + u32 sc_xfer_bit : 1; + u32 sram_data : 8; + u32 sram_rw : 1; + u32 sram_addr :15; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_write :16; + u32 net_addr_read :16; + } net_buf_reg_704; + + struct { + u32 cai_cnt : 4; + u32 reserved2 : 6; + u32 cai_write :11; + u32 reserved1 : 5; + u32 cai_read :11; + } cai_buf_reg_708; + + struct { + u32 cao_cnt : 4; + u32 reserved2 : 6; + u32 cap_write :11; + u32 reserved1 : 5; + u32 cao_read :11; + } cao_buf_reg_70c; + + struct { + u32 media_cnt : 4; + u32 reserved2 : 6; + u32 media_write :11; + u32 reserved1 : 5; + u32 media_read :11; + } media_buf_reg_710; + + struct { + u32 reserved :17; + u32 ctrl_maximumfill : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_usb_wan : 1; + u32 cao_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 net_ovflow_error : 1; + u32 MEDIA_Dest : 2; + u32 CAO_Dest : 2; + u32 CAI_Dest : 2; + u32 NET_Dest : 2; + } sram_dest_reg_714; + + struct { + u32 reserved3 :11; + u32 net_addr_write : 1; + u32 reserved2 : 3; + u32 net_addr_read : 1; + u32 reserved1 : 4; + u32 net_cnt :12; + } net_buf_reg_718; + + struct { + u32 reserved3 : 4; + u32 wan_pkt_frame : 4; + u32 reserved2 : 4; + u32 sram_memmap : 2; + u32 sram_chip : 2; + u32 wan_wait_state : 8; + u32 reserved1 : 6; + u32 wan_speed_sig : 2; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +#endif diff --git a/drivers/media/common/b2c2/flexcop_ibi_value_le.h b/drivers/media/common/b2c2/flexcop_ibi_value_le.h new file mode 100644 index 00000000..c75830d7 --- /dev/null +++ b/drivers/media/common/b2c2/flexcop_ibi_value_le.h @@ -0,0 +1,455 @@ +/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * register descriptions + * see flexcop.c for copyright information + */ +/* This file is automatically generated, do not edit things here. */ +#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ +#define __FLEXCOP_IBI_VALUE_INCLUDED__ + +typedef union { + u32 raw; + + struct { + u32 dma_0start : 1; + u32 dma_0No_update : 1; + u32 dma_address0 :30; + } dma_0x0; + + struct { + u32 DMA_maxpackets : 8; + u32 dma_addr_size :24; + } dma_0x4_remap; + + struct { + u32 dma1timer : 7; + u32 unused : 1; + u32 dma_addr_size :24; + } dma_0x4_read; + + struct { + u32 unused : 1; + u32 dmatimer : 7; + u32 dma_addr_size :24; + } dma_0x4_write; + + struct { + u32 unused : 2; + u32 dma_cur_addr :30; + } dma_0x8; + + struct { + u32 dma_1start : 1; + u32 remap_enable : 1; + u32 dma_address1 :30; + } dma_0xc; + + struct { + u32 chipaddr : 7; + u32 reserved1 : 1; + u32 baseaddr : 8; + u32 data1_reg : 8; + u32 working_start : 1; + u32 twoWS_rw : 1; + u32 total_bytes : 2; + u32 twoWS_port_reg : 2; + u32 no_base_addr_ack_error : 1; + u32 st_done : 1; + } tw_sm_c_100; + + struct { + u32 data2_reg : 8; + u32 data3_reg : 8; + u32 data4_reg : 8; + u32 exlicit_stops : 1; + u32 force_stop : 1; + u32 unused : 6; + } tw_sm_c_104; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_108; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_10c; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_110; + + struct { + u32 LNB_CTLHighCount_sig :15; + u32 LNB_CTLLowCount_sig :15; + u32 LNB_CTLPrescaler_sig : 2; + } lnb_switch_freq_200; + + struct { + u32 ACPI1_sig : 1; + u32 ACPI3_sig : 1; + u32 LNB_L_H_sig : 1; + u32 Per_reset_sig : 1; + u32 reserved :20; + u32 Rev_N_sig_revision_hi : 4; + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_caps : 1; + u32 Rev_N_sig_reserved2 : 1; + } misc_204; + + struct { + u32 Stream1_filter_sig : 1; + u32 Stream2_filter_sig : 1; + u32 PCR_filter_sig : 1; + u32 PMT_filter_sig : 1; + u32 EMM_filter_sig : 1; + u32 ECM_filter_sig : 1; + u32 Null_filter_sig : 1; + u32 Mask_filter_sig : 1; + u32 WAN_Enable_sig : 1; + u32 WAN_CA_Enable_sig : 1; + u32 CA_Enable_sig : 1; + u32 SMC_Enable_sig : 1; + u32 Per_CA_Enable_sig : 1; + u32 Multi2_Enable_sig : 1; + u32 MAC_filter_Mode_sig : 1; + u32 Rcv_Data_sig : 1; + u32 DMA1_IRQ_Enable_sig : 1; + u32 DMA1_Timer_Enable_sig : 1; + u32 DMA2_IRQ_Enable_sig : 1; + u32 DMA2_Timer_Enable_sig : 1; + u32 DMA1_Size_IRQ_Enable_sig : 1; + u32 DMA2_Size_IRQ_Enable_sig : 1; + u32 Mailbox_from_V8_Enable_sig : 1; + u32 unused : 9; + } ctrl_208; + + struct { + u32 DMA1_IRQ_Status : 1; + u32 DMA1_Timer_Status : 1; + u32 DMA2_IRQ_Status : 1; + u32 DMA2_Timer_Status : 1; + u32 DMA1_Size_IRQ_Status : 1; + u32 DMA2_Size_IRQ_Status : 1; + u32 Mailbox_from_V8_Status_sig : 1; + u32 Data_receiver_error : 1; + u32 Continuity_error_flag : 1; + u32 LLC_SNAP_FLAG_set : 1; + u32 Transport_Error : 1; + u32 reserved :21; + } irq_20c; + + struct { + u32 reset_block_000 : 1; + u32 reset_block_100 : 1; + u32 reset_block_200 : 1; + u32 reset_block_300 : 1; + u32 reset_block_400 : 1; + u32 reset_block_500 : 1; + u32 reset_block_600 : 1; + u32 reset_block_700 : 1; + u32 Block_reset_enable : 8; + u32 Special_controls :16; + } sw_reset_210; + + struct { + u32 vuart_oe_sig : 1; + u32 v2WS_oe_sig : 1; + u32 halt_V8_sig : 1; + u32 section_pkg_enable_sig : 1; + u32 s2p_sel_sig : 1; + u32 unused1 : 3; + u32 polarity_PS_CLK_sig : 1; + u32 polarity_PS_VALID_sig : 1; + u32 polarity_PS_SYNC_sig : 1; + u32 polarity_PS_ERR_sig : 1; + u32 unused2 :20; + } misc_214; + + struct { + u32 Mailbox_from_V8 :32; + } mbox_v8_to_host_218; + + struct { + u32 sysramaccess_data : 8; + u32 sysramaccess_addr :15; + u32 unused : 7; + u32 sysramaccess_write : 1; + u32 sysramaccess_busmuster : 1; + } mbox_host_to_v8_21c; + + struct { + u32 Stream1_PID :13; + u32 Stream1_trans : 1; + u32 MAC_Multicast_filter : 1; + u32 debug_flag_pid_saved : 1; + u32 Stream2_PID :13; + u32 Stream2_trans : 1; + u32 debug_flag_write_status00 : 1; + u32 debug_fifo_problem : 1; + } pid_filter_300; + + struct { + u32 PCR_PID :13; + u32 PCR_trans : 1; + u32 debug_overrun3 : 1; + u32 debug_overrun2 : 1; + u32 PMT_PID :13; + u32 PMT_trans : 1; + u32 reserved : 2; + } pid_filter_304; + + struct { + u32 EMM_PID :13; + u32 EMM_trans : 1; + u32 EMM_filter_4 : 1; + u32 EMM_filter_6 : 1; + u32 ECM_PID :13; + u32 ECM_trans : 1; + u32 reserved : 2; + } pid_filter_308; + + struct { + u32 Group_PID :13; + u32 Group_trans : 1; + u32 unused1 : 2; + u32 Group_mask :13; + u32 unused2 : 3; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 net_master_read :17; + u32 unused :15; + } pid_filter_30c_ext_ind_1; + + struct { + u32 net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_2; + + struct { + u32 next_net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_3; + + struct { + u32 unused1 : 1; + u32 state_write :10; + u32 reserved1 : 6; + u32 stack_read :10; + u32 reserved2 : 5; + } pid_filter_30c_ext_ind_4; + + struct { + u32 stack_cnt :10; + u32 unused :22; + } pid_filter_30c_ext_ind_5; + + struct { + u32 pid_fsm_save_reg0 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 write_status1 : 2; + u32 write_status4 : 2; + u32 data_size_reg :12; + u32 unused : 4; + } pid_filter_30c_ext_ind_6; + + struct { + u32 index_reg : 5; + u32 extra_index_reg : 3; + u32 AB_select : 1; + u32 pass_alltables : 1; + u32 unused :22; + } index_reg_310; + + struct { + u32 PID :13; + u32 PID_trans : 1; + u32 PID_enable_bit : 1; + u32 reserved :17; + } pid_n_reg_314; + + struct { + u32 A4_byte : 8; + u32 A5_byte : 8; + u32 A6_byte : 8; + u32 Enable_bit : 1; + u32 HighAB_bit : 1; + u32 reserved : 6; + } mac_low_reg_318; + + struct { + u32 A1_byte : 8; + u32 A2_byte : 8; + u32 A3_byte : 8; + u32 reserved : 8; + } mac_high_reg_31c; + + struct { + u32 reserved :16; + u32 data_Tag_ID :16; + } data_tag_400; + + struct { + u32 Card_IDbyte6 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte3 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte2 : 8; + u32 Card_IDbyte1 : 8; + } card_id_40c; + + struct { + u32 MAC1 : 8; + u32 MAC2 : 8; + u32 MAC3 : 8; + u32 MAC6 : 8; + } mac_address_418; + + struct { + u32 MAC7 : 8; + u32 MAC8 : 8; + u32 reserved :16; + } mac_address_41c; + + struct { + u32 transmitter_data_byte : 8; + u32 ReceiveDataReady : 1; + u32 ReceiveByteFrameError : 1; + u32 txbuffempty : 1; + u32 reserved :21; + } ci_600; + + struct { + u32 pi_d : 8; + u32 pi_ha :20; + u32 pi_rw : 1; + u32 pi_component_reg : 3; + } pi_604; + + struct { + u32 serialReset : 1; + u32 oncecycle_read : 1; + u32 Timer_Read_req : 1; + u32 Timer_Load_req : 1; + u32 timer_data : 7; + u32 unused : 1; + u32 Timer_addr : 5; + u32 reserved : 3; + u32 pcmcia_a_mod_pwr_n : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 config_Done_stat : 1; + u32 config_Init_stat : 1; + u32 config_Prog_n : 1; + u32 config_wr_n : 1; + u32 config_cs_n : 1; + u32 config_cclk : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 pi_timeout_status : 1; + u32 pi_wait_n : 1; + u32 pi_busy_n : 1; + } pi_608; + + struct { + u32 PID :13; + u32 key_enable : 1; + u32 key_code : 2; + u32 key_array_col : 3; + u32 key_array_row : 5; + u32 dvb_en : 1; + u32 rw_flag : 1; + u32 reserved : 6; + } dvb_reg_60c; + + struct { + u32 sram_addr :15; + u32 sram_rw : 1; + u32 sram_data : 8; + u32 sc_xfer_bit : 1; + u32 reserved1 : 3; + u32 oe_pin_reg : 1; + u32 ce_pin_reg : 1; + u32 reserved2 : 1; + u32 start_sram_ibi : 1; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_read :16; + u32 net_addr_write :16; + } net_buf_reg_704; + + struct { + u32 cai_read :11; + u32 reserved1 : 5; + u32 cai_write :11; + u32 reserved2 : 6; + u32 cai_cnt : 4; + } cai_buf_reg_708; + + struct { + u32 cao_read :11; + u32 reserved1 : 5; + u32 cap_write :11; + u32 reserved2 : 6; + u32 cao_cnt : 4; + } cao_buf_reg_70c; + + struct { + u32 media_read :11; + u32 reserved1 : 5; + u32 media_write :11; + u32 reserved2 : 6; + u32 media_cnt : 4; + } media_buf_reg_710; + + struct { + u32 NET_Dest : 2; + u32 CAI_Dest : 2; + u32 CAO_Dest : 2; + u32 MEDIA_Dest : 2; + u32 net_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 cao_ovflow_error : 1; + u32 ctrl_usb_wan : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_maximumfill : 1; + u32 reserved :17; + } sram_dest_reg_714; + + struct { + u32 net_cnt :12; + u32 reserved1 : 4; + u32 net_addr_read : 1; + u32 reserved2 : 3; + u32 net_addr_write : 1; + u32 reserved3 :11; + } net_buf_reg_718; + + struct { + u32 wan_speed_sig : 2; + u32 reserved1 : 6; + u32 wan_wait_state : 8; + u32 sram_chip : 2; + u32 sram_memmap : 2; + u32 reserved2 : 4; + u32 wan_pkt_frame : 4; + u32 reserved3 : 4; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +#endif diff --git a/drivers/media/common/btcx-risc.c b/drivers/media/common/btcx-risc.c new file mode 100644 index 00000000..ac1b2687 --- /dev/null +++ b/drivers/media/common/btcx-risc.c @@ -0,0 +1,260 @@ +/* + + btcx-risc.c + + bt848/bt878/cx2388x risc code generator. + + (c) 2000-03 Gerd Knorr [SuSE Labs] + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "btcx-risc.h" + +MODULE_DESCRIPTION("some code shared by bttv and cx88xx drivers"); +MODULE_AUTHOR("Gerd Knorr"); +MODULE_LICENSE("GPL"); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"debug messages, default is 0 (no)"); + +/* ---------------------------------------------------------- */ +/* allocate/free risc memory */ + +static int memcnt; + +void btcx_riscmem_free(struct pci_dev *pci, + struct btcx_riscmem *risc) +{ + if (NULL == risc->cpu) + return; + if (debug) { + memcnt--; + printk("btcx: riscmem free [%d] dma=%lx\n", + memcnt, (unsigned long)risc->dma); + } + pci_free_consistent(pci, risc->size, risc->cpu, risc->dma); + memset(risc,0,sizeof(*risc)); +} + +int btcx_riscmem_alloc(struct pci_dev *pci, + struct btcx_riscmem *risc, + unsigned int size) +{ + __le32 *cpu; + dma_addr_t dma = 0; + + if (NULL != risc->cpu && risc->size < size) + btcx_riscmem_free(pci,risc); + if (NULL == risc->cpu) { + cpu = pci_alloc_consistent(pci, size, &dma); + if (NULL == cpu) + return -ENOMEM; + risc->cpu = cpu; + risc->dma = dma; + risc->size = size; + if (debug) { + memcnt++; + printk("btcx: riscmem alloc [%d] dma=%lx cpu=%p size=%d\n", + memcnt, (unsigned long)dma, cpu, size); + } + } + memset(risc->cpu,0,risc->size); + return 0; +} + +/* ---------------------------------------------------------- */ +/* screen overlay helpers */ + +int +btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win, + struct v4l2_clip *clips, unsigned int n) +{ + if (win->left < 0) { + /* left */ + clips[n].c.left = 0; + clips[n].c.top = 0; + clips[n].c.width = -win->left; + clips[n].c.height = win->height; + n++; + } + if (win->left + win->width > swidth) { + /* right */ + clips[n].c.left = swidth - win->left; + clips[n].c.top = 0; + clips[n].c.width = win->width - clips[n].c.left; + clips[n].c.height = win->height; + n++; + } + if (win->top < 0) { + /* top */ + clips[n].c.left = 0; + clips[n].c.top = 0; + clips[n].c.width = win->width; + clips[n].c.height = -win->top; + n++; + } + if (win->top + win->height > sheight) { + /* bottom */ + clips[n].c.left = 0; + clips[n].c.top = sheight - win->top; + clips[n].c.width = win->width; + clips[n].c.height = win->height - clips[n].c.top; + n++; + } + return n; +} + +int +btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips, unsigned int n, int mask) +{ + s32 nx,nw,dx; + unsigned int i; + + /* fixup window */ + nx = (win->left + mask) & ~mask; + nw = (win->width) & ~mask; + if (nx + nw > win->left + win->width) + nw -= mask+1; + dx = nx - win->left; + win->left = nx; + win->width = nw; + if (debug) + printk(KERN_DEBUG "btcx: window align %dx%d+%d+%d [dx=%d]\n", + win->width, win->height, win->left, win->top, dx); + + /* fixup clips */ + for (i = 0; i < n; i++) { + nx = (clips[i].c.left-dx) & ~mask; + nw = (clips[i].c.width) & ~mask; + if (nx + nw < clips[i].c.left-dx + clips[i].c.width) + nw += mask+1; + clips[i].c.left = nx; + clips[i].c.width = nw; + if (debug) + printk(KERN_DEBUG "btcx: clip align %dx%d+%d+%d\n", + clips[i].c.width, clips[i].c.height, + clips[i].c.left, clips[i].c.top); + } + return 0; +} + +void +btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips) +{ + struct v4l2_clip swap; + int i,j,n; + + if (nclips < 2) + return; + for (i = nclips-2; i >= 0; i--) { + for (n = 0, j = 0; j <= i; j++) { + if (clips[j].c.left > clips[j+1].c.left) { + swap = clips[j]; + clips[j] = clips[j+1]; + clips[j+1] = swap; + n++; + } + } + if (0 == n) + break; + } +} + +void +btcx_calc_skips(int line, int width, int *maxy, + struct btcx_skiplist *skips, unsigned int *nskips, + const struct v4l2_clip *clips, unsigned int nclips) +{ + unsigned int clip,skip; + int end, maxline; + + skip=0; + maxline = 9999; + for (clip = 0; clip < nclips; clip++) { + + /* sanity checks */ + if (clips[clip].c.left + clips[clip].c.width <= 0) + continue; + if (clips[clip].c.left > (signed)width) + break; + + /* vertical range */ + if (line > clips[clip].c.top+clips[clip].c.height-1) + continue; + if (line < clips[clip].c.top) { + if (maxline > clips[clip].c.top-1) + maxline = clips[clip].c.top-1; + continue; + } + if (maxline > clips[clip].c.top+clips[clip].c.height-1) + maxline = clips[clip].c.top+clips[clip].c.height-1; + + /* horizontal range */ + if (0 == skip || clips[clip].c.left > skips[skip-1].end) { + /* new one */ + skips[skip].start = clips[clip].c.left; + if (skips[skip].start < 0) + skips[skip].start = 0; + skips[skip].end = clips[clip].c.left + clips[clip].c.width; + if (skips[skip].end > width) + skips[skip].end = width; + skip++; + } else { + /* overlaps -- expand last one */ + end = clips[clip].c.left + clips[clip].c.width; + if (skips[skip-1].end < end) + skips[skip-1].end = end; + if (skips[skip-1].end > width) + skips[skip-1].end = width; + } + } + *nskips = skip; + *maxy = maxline; + + if (debug) { + printk(KERN_DEBUG "btcx: skips line %d-%d:",line,maxline); + for (skip = 0; skip < *nskips; skip++) { + printk(" %d-%d",skips[skip].start,skips[skip].end); + } + printk("\n"); + } +} + +/* ---------------------------------------------------------- */ + +EXPORT_SYMBOL(btcx_riscmem_alloc); +EXPORT_SYMBOL(btcx_riscmem_free); + +EXPORT_SYMBOL(btcx_screen_clips); +EXPORT_SYMBOL(btcx_align); +EXPORT_SYMBOL(btcx_sort_clips); +EXPORT_SYMBOL(btcx_calc_skips); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/common/btcx-risc.h b/drivers/media/common/btcx-risc.h new file mode 100644 index 00000000..f8bc6e8e --- /dev/null +++ b/drivers/media/common/btcx-risc.h @@ -0,0 +1,34 @@ +/* + */ +struct btcx_riscmem { + unsigned int size; + __le32 *cpu; + __le32 *jmp; + dma_addr_t dma; +}; + +struct btcx_skiplist { + int start; + int end; +}; + +int btcx_riscmem_alloc(struct pci_dev *pci, + struct btcx_riscmem *risc, + unsigned int size); +void btcx_riscmem_free(struct pci_dev *pci, + struct btcx_riscmem *risc); + +int btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win, + struct v4l2_clip *clips, unsigned int n); +int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips, + unsigned int n, int mask); +void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips); +void btcx_calc_skips(int line, int width, int *maxy, + struct btcx_skiplist *skips, unsigned int *nskips, + const struct v4l2_clip *clips, unsigned int nclips); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/common/cx2341x.c b/drivers/media/common/cx2341x.c new file mode 100644 index 00000000..103ef6ba --- /dev/null +++ b/drivers/media/common/cx2341x.c @@ -0,0 +1,1726 @@ +/* + * cx2341x - generic code for cx23415/6/8 based devices + * + * Copyright (C) 2006 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +MODULE_DESCRIPTION("cx23415/6/8 driver"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/********************** COMMON CODE *********************/ + +/* definitions for audio properties bits 29-28 */ +#define CX2341X_AUDIO_ENCODING_METHOD_MPEG 0 +#define CX2341X_AUDIO_ENCODING_METHOD_AC3 1 +#define CX2341X_AUDIO_ENCODING_METHOD_LPCM 2 + +static const char *cx2341x_get_name(u32 id) +{ + switch (id) { + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + return "Spatial Filter Mode"; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + return "Spatial Filter"; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + return "Spatial Luma Filter Type"; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + return "Spatial Chroma Filter Type"; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + return "Temporal Filter Mode"; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + return "Temporal Filter"; + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + return "Median Filter Type"; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + return "Median Luma Filter Maximum"; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + return "Median Luma Filter Minimum"; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + return "Median Chroma Filter Maximum"; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + return "Median Chroma Filter Minimum"; + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + return "Insert Navigation Packets"; + } + return NULL; +} + +static const char **cx2341x_get_menu(u32 id) +{ + static const char *cx2341x_video_spatial_filter_mode_menu[] = { + "Manual", + "Auto", + NULL + }; + + static const char *cx2341x_video_luma_spatial_filter_type_menu[] = { + "Off", + "1D Horizontal", + "1D Vertical", + "2D H/V Separable", + "2D Symmetric non-separable", + NULL + }; + + static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = { + "Off", + "1D Horizontal", + NULL + }; + + static const char *cx2341x_video_temporal_filter_mode_menu[] = { + "Manual", + "Auto", + NULL + }; + + static const char *cx2341x_video_median_filter_type_menu[] = { + "Off", + "Horizontal", + "Vertical", + "Horizontal/Vertical", + "Diagonal", + NULL + }; + + switch (id) { + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + return cx2341x_video_spatial_filter_mode_menu; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + return cx2341x_video_luma_spatial_filter_type_menu; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + return cx2341x_video_chroma_spatial_filter_type_menu; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + return cx2341x_video_temporal_filter_mode_menu; + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + return cx2341x_video_median_filter_type_menu; + } + return NULL; +} + +static void cx2341x_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, + s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags) +{ + *name = cx2341x_get_name(id); + *flags = 0; + + switch (id) { + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + *type = V4L2_CTRL_TYPE_MENU; + *min = 0; + *step = 0; + break; + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + *type = V4L2_CTRL_TYPE_BOOLEAN; + *min = 0; + *max = *step = 1; + break; + default: + *type = V4L2_CTRL_TYPE_INTEGER; + break; + } + switch (id) { + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + *flags |= V4L2_CTRL_FLAG_UPDATE; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + *flags |= V4L2_CTRL_FLAG_SLIDER; + break; + case V4L2_CID_MPEG_VIDEO_ENCODING: + *flags |= V4L2_CTRL_FLAG_READ_ONLY; + break; + } +} + + +/********************** OLD CODE *********************/ + +/* Must be sorted from low to high control ID! */ +const u32 cx2341x_mpeg_ctrls[] = { + V4L2_CID_MPEG_CLASS, + V4L2_CID_MPEG_STREAM_TYPE, + V4L2_CID_MPEG_STREAM_VBI_FMT, + V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, + V4L2_CID_MPEG_AUDIO_ENCODING, + V4L2_CID_MPEG_AUDIO_L2_BITRATE, + V4L2_CID_MPEG_AUDIO_MODE, + V4L2_CID_MPEG_AUDIO_MODE_EXTENSION, + V4L2_CID_MPEG_AUDIO_EMPHASIS, + V4L2_CID_MPEG_AUDIO_CRC, + V4L2_CID_MPEG_AUDIO_MUTE, + V4L2_CID_MPEG_AUDIO_AC3_BITRATE, + V4L2_CID_MPEG_VIDEO_ENCODING, + V4L2_CID_MPEG_VIDEO_ASPECT, + V4L2_CID_MPEG_VIDEO_B_FRAMES, + V4L2_CID_MPEG_VIDEO_GOP_SIZE, + V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, + V4L2_CID_MPEG_VIDEO_BITRATE_MODE, + V4L2_CID_MPEG_VIDEO_BITRATE, + V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, + V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, + V4L2_CID_MPEG_VIDEO_MUTE, + V4L2_CID_MPEG_VIDEO_MUTE_YUV, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER, + V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP, + V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS, + 0 +}; +EXPORT_SYMBOL(cx2341x_mpeg_ctrls); + +static const struct cx2341x_mpeg_params default_params = { + /* misc */ + .capabilities = 0, + .port = CX2341X_PORT_MEMORY, + .width = 720, + .height = 480, + .is_50hz = 0, + + /* stream */ + .stream_type = V4L2_MPEG_STREAM_TYPE_MPEG2_PS, + .stream_vbi_fmt = V4L2_MPEG_STREAM_VBI_FMT_NONE, + .stream_insert_nav_packets = 0, + + /* audio */ + .audio_sampling_freq = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, + .audio_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + .audio_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_224K, + .audio_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_224K, + .audio_mode = V4L2_MPEG_AUDIO_MODE_STEREO, + .audio_mode_extension = V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4, + .audio_emphasis = V4L2_MPEG_AUDIO_EMPHASIS_NONE, + .audio_crc = V4L2_MPEG_AUDIO_CRC_NONE, + .audio_mute = 0, + + /* video */ + .video_encoding = V4L2_MPEG_VIDEO_ENCODING_MPEG_2, + .video_aspect = V4L2_MPEG_VIDEO_ASPECT_4x3, + .video_b_frames = 2, + .video_gop_size = 12, + .video_gop_closure = 1, + .video_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + .video_bitrate = 6000000, + .video_bitrate_peak = 8000000, + .video_temporal_decimation = 0, + .video_mute = 0, + .video_mute_yuv = 0x008080, /* YCbCr value for black */ + + /* encoding filters */ + .video_spatial_filter_mode = + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, + .video_spatial_filter = 0, + .video_luma_spatial_filter_type = + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR, + .video_chroma_spatial_filter_type = + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, + .video_temporal_filter_mode = + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, + .video_temporal_filter = 8, + .video_median_filter_type = + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, + .video_luma_median_filter_top = 255, + .video_luma_median_filter_bottom = 0, + .video_chroma_median_filter_top = 255, + .video_chroma_median_filter_bottom = 0, +}; +/* Map the control ID to the correct field in the cx2341x_mpeg_params + struct. Return -EINVAL if the ID is unknown, else return 0. */ +static int cx2341x_get_ctrl(const struct cx2341x_mpeg_params *params, + struct v4l2_ext_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + ctrl->value = params->audio_sampling_freq; + break; + case V4L2_CID_MPEG_AUDIO_ENCODING: + ctrl->value = params->audio_encoding; + break; + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + ctrl->value = params->audio_l2_bitrate; + break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + ctrl->value = params->audio_ac3_bitrate; + break; + case V4L2_CID_MPEG_AUDIO_MODE: + ctrl->value = params->audio_mode; + break; + case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: + ctrl->value = params->audio_mode_extension; + break; + case V4L2_CID_MPEG_AUDIO_EMPHASIS: + ctrl->value = params->audio_emphasis; + break; + case V4L2_CID_MPEG_AUDIO_CRC: + ctrl->value = params->audio_crc; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + ctrl->value = params->audio_mute; + break; + case V4L2_CID_MPEG_VIDEO_ENCODING: + ctrl->value = params->video_encoding; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + ctrl->value = params->video_aspect; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + ctrl->value = params->video_b_frames; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + ctrl->value = params->video_gop_size; + break; + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + ctrl->value = params->video_gop_closure; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + ctrl->value = params->video_bitrate_mode; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + ctrl->value = params->video_bitrate; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + ctrl->value = params->video_bitrate_peak; + break; + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: + ctrl->value = params->video_temporal_decimation; + break; + case V4L2_CID_MPEG_VIDEO_MUTE: + ctrl->value = params->video_mute; + break; + case V4L2_CID_MPEG_VIDEO_MUTE_YUV: + ctrl->value = params->video_mute_yuv; + break; + case V4L2_CID_MPEG_STREAM_TYPE: + ctrl->value = params->stream_type; + break; + case V4L2_CID_MPEG_STREAM_VBI_FMT: + ctrl->value = params->stream_vbi_fmt; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + ctrl->value = params->video_spatial_filter_mode; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + ctrl->value = params->video_spatial_filter; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + ctrl->value = params->video_luma_spatial_filter_type; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + ctrl->value = params->video_chroma_spatial_filter_type; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + ctrl->value = params->video_temporal_filter_mode; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + ctrl->value = params->video_temporal_filter; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + ctrl->value = params->video_median_filter_type; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + ctrl->value = params->video_luma_median_filter_top; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + ctrl->value = params->video_luma_median_filter_bottom; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + ctrl->value = params->video_chroma_median_filter_top; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + ctrl->value = params->video_chroma_median_filter_bottom; + break; + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + ctrl->value = params->stream_insert_nav_packets; + break; + default: + return -EINVAL; + } + return 0; +} + +/* Map the control ID to the correct field in the cx2341x_mpeg_params + struct. Return -EINVAL if the ID is unknown, else return 0. */ +static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params, int busy, + struct v4l2_ext_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + if (busy) + return -EBUSY; + params->audio_sampling_freq = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_ENCODING: + if (busy) + return -EBUSY; + if (params->capabilities & CX2341X_CAP_HAS_AC3) + if (ctrl->value != V4L2_MPEG_AUDIO_ENCODING_LAYER_2 && + ctrl->value != V4L2_MPEG_AUDIO_ENCODING_AC3) + return -ERANGE; + params->audio_encoding = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + if (busy) + return -EBUSY; + params->audio_l2_bitrate = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (busy) + return -EBUSY; + if (!(params->capabilities & CX2341X_CAP_HAS_AC3)) + return -EINVAL; + params->audio_ac3_bitrate = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_MODE: + params->audio_mode = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: + params->audio_mode_extension = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_EMPHASIS: + params->audio_emphasis = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_CRC: + params->audio_crc = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + params->audio_mute = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + params->video_aspect = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: { + int b = ctrl->value + 1; + int gop = params->video_gop_size; + params->video_b_frames = ctrl->value; + params->video_gop_size = b * ((gop + b - 1) / b); + /* Max GOP size = 34 */ + while (params->video_gop_size > 34) + params->video_gop_size -= b; + break; + } + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: { + int b = params->video_b_frames + 1; + int gop = ctrl->value; + params->video_gop_size = b * ((gop + b - 1) / b); + /* Max GOP size = 34 */ + while (params->video_gop_size > 34) + params->video_gop_size -= b; + ctrl->value = params->video_gop_size; + break; + } + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + params->video_gop_closure = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + if (busy) + return -EBUSY; + /* MPEG-1 only allows CBR */ + if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1 && + ctrl->value != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) + return -EINVAL; + params->video_bitrate_mode = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + if (busy) + return -EBUSY; + params->video_bitrate = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + if (busy) + return -EBUSY; + params->video_bitrate_peak = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: + params->video_temporal_decimation = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_MUTE: + params->video_mute = (ctrl->value != 0); + break; + case V4L2_CID_MPEG_VIDEO_MUTE_YUV: + params->video_mute_yuv = ctrl->value; + break; + case V4L2_CID_MPEG_STREAM_TYPE: + if (busy) + return -EBUSY; + params->stream_type = ctrl->value; + params->video_encoding = + (params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_SS || + params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ? + V4L2_MPEG_VIDEO_ENCODING_MPEG_1 : + V4L2_MPEG_VIDEO_ENCODING_MPEG_2; + if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) + /* MPEG-1 implies CBR */ + params->video_bitrate_mode = + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR; + break; + case V4L2_CID_MPEG_STREAM_VBI_FMT: + params->stream_vbi_fmt = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + params->video_spatial_filter_mode = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + params->video_spatial_filter = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + params->video_luma_spatial_filter_type = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + params->video_chroma_spatial_filter_type = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + params->video_temporal_filter_mode = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + params->video_temporal_filter = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + params->video_median_filter_type = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + params->video_luma_median_filter_top = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + params->video_luma_median_filter_bottom = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + params->video_chroma_median_filter_top = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + params->video_chroma_median_filter_bottom = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + params->stream_insert_nav_packets = ctrl->value; + break; + default: + return -EINVAL; + } + return 0; +} + +static int cx2341x_ctrl_query_fill(struct v4l2_queryctrl *qctrl, + s32 min, s32 max, s32 step, s32 def) +{ + const char *name; + + switch (qctrl->id) { + /* MPEG controls */ + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + cx2341x_ctrl_fill(qctrl->id, &name, &qctrl->type, + &min, &max, &step, &def, &qctrl->flags); + qctrl->minimum = min; + qctrl->maximum = max; + qctrl->step = step; + qctrl->default_value = def; + qctrl->reserved[0] = qctrl->reserved[1] = 0; + strlcpy(qctrl->name, name, sizeof(qctrl->name)); + return 0; + + default: + return v4l2_ctrl_query_fill(qctrl, min, max, step, def); + } +} + +int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, + struct v4l2_queryctrl *qctrl) +{ + int err; + + switch (qctrl->id) { + case V4L2_CID_MPEG_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); + case V4L2_CID_MPEG_STREAM_TYPE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_STREAM_TYPE_MPEG2_PS, + V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, 1, + V4L2_MPEG_STREAM_TYPE_MPEG2_PS); + + case V4L2_CID_MPEG_STREAM_VBI_FMT: + if (params->capabilities & CX2341X_CAP_HAS_SLICED_VBI) + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_STREAM_VBI_FMT_NONE, + V4L2_MPEG_STREAM_VBI_FMT_IVTV, 1, + V4L2_MPEG_STREAM_VBI_FMT_NONE); + return cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_STREAM_VBI_FMT_NONE, + V4L2_MPEG_STREAM_VBI_FMT_NONE, 1, + default_params.stream_vbi_fmt); + + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 1, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000); + + case V4L2_CID_MPEG_AUDIO_ENCODING: + if (params->capabilities & CX2341X_CAP_HAS_AC3) { + /* + * The state of L2 & AC3 bitrate controls can change + * when this control changes, but v4l2_ctrl_query_fill() + * already sets V4L2_CTRL_FLAG_UPDATE for + * V4L2_CID_MPEG_AUDIO_ENCODING, so we don't here. + */ + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_MPEG_AUDIO_ENCODING_AC3, 1, + default_params.audio_encoding); + } + + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, 1, + default_params.audio_encoding); + + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_L2_BITRATE_192K, + V4L2_MPEG_AUDIO_L2_BITRATE_384K, 1, + default_params.audio_l2_bitrate); + if (err) + return err; + if (params->capabilities & CX2341X_CAP_HAS_AC3 && + params->audio_encoding != V4L2_MPEG_AUDIO_ENCODING_LAYER_2) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_AUDIO_MODE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_MODE_STEREO, + V4L2_MPEG_AUDIO_MODE_MONO, 1, + V4L2_MPEG_AUDIO_MODE_STEREO); + + case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 1, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4); + if (err == 0 && + params->audio_mode != V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return err; + + case V4L2_CID_MPEG_AUDIO_EMPHASIS: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_EMPHASIS_NONE, + V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 1, + V4L2_MPEG_AUDIO_EMPHASIS_NONE); + + case V4L2_CID_MPEG_AUDIO_CRC: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_CRC_NONE, + V4L2_MPEG_AUDIO_CRC_CRC16, 1, + V4L2_MPEG_AUDIO_CRC_NONE); + + case V4L2_CID_MPEG_AUDIO_MUTE: + return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 0); + + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_AC3_BITRATE_48K, + V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 1, + default_params.audio_ac3_bitrate); + if (err) + return err; + if (params->capabilities & CX2341X_CAP_HAS_AC3) { + if (params->audio_encoding != + V4L2_MPEG_AUDIO_ENCODING_AC3) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + } else + qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + return 0; + + case V4L2_CID_MPEG_VIDEO_ENCODING: + /* this setting is read-only for the cx2341x since the + V4L2_CID_MPEG_STREAM_TYPE really determines the + MPEG-1/2 setting */ + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_ENCODING_MPEG_1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2); + if (err == 0) + qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + return err; + + case V4L2_CID_MPEG_VIDEO_ASPECT: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_ASPECT_1x1, + V4L2_MPEG_VIDEO_ASPECT_221x100, 1, + V4L2_MPEG_VIDEO_ASPECT_4x3); + + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + return v4l2_ctrl_query_fill(qctrl, 0, 33, 1, 2); + + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + return v4l2_ctrl_query_fill(qctrl, 1, 34, 1, + params->is_50hz ? 12 : 15); + + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 1); + + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 1, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); + if (err == 0 && + params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return err; + + case V4L2_CID_MPEG_VIDEO_BITRATE: + return v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 6000000); + + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + err = v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 8000000); + if (err == 0 && + params->video_bitrate_mode == + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return err; + + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: + return v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 0); + + case V4L2_CID_MPEG_VIDEO_MUTE: + return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 0); + + case V4L2_CID_MPEG_VIDEO_MUTE_YUV: /* Init YUV (really YCbCr) to black */ + return v4l2_ctrl_query_fill(qctrl, 0, 0xffffff, 1, 0x008080); + + /* CX23415/6 specific */ + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + return cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 1, + default_params.video_spatial_filter_mode); + + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + cx2341x_ctrl_query_fill(qctrl, 0, 15, 1, + default_params.video_spatial_filter); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE, + 1, + default_params.video_luma_spatial_filter_type); + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, + 1, + default_params.video_chroma_spatial_filter_type); + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + return cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO, 1, + default_params.video_temporal_filter_mode); + + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + cx2341x_ctrl_query_fill(qctrl, 0, 31, 1, + default_params.video_temporal_filter); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_temporal_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + return cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG, 1, + default_params.video_median_filter_type); + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, + default_params.video_luma_median_filter_top); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, + default_params.video_luma_median_filter_bottom); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, + default_params.video_chroma_median_filter_top); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, + default_params.video_chroma_median_filter_bottom); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + return cx2341x_ctrl_query_fill(qctrl, 0, 1, 1, + default_params.stream_insert_nav_packets); + + default: + return -EINVAL; + + } +} +EXPORT_SYMBOL(cx2341x_ctrl_query); + +const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id) +{ + static const char * const mpeg_stream_type_without_ts[] = { + "MPEG-2 Program Stream", + "", + "MPEG-1 System Stream", + "MPEG-2 DVD-compatible Stream", + "MPEG-1 VCD-compatible Stream", + "MPEG-2 SVCD-compatible Stream", + NULL + }; + + static const char *mpeg_stream_type_with_ts[] = { + "MPEG-2 Program Stream", + "MPEG-2 Transport Stream", + "MPEG-1 System Stream", + "MPEG-2 DVD-compatible Stream", + "MPEG-1 VCD-compatible Stream", + "MPEG-2 SVCD-compatible Stream", + NULL + }; + + static const char *mpeg_audio_encoding_l2_ac3[] = { + "", + "MPEG-1/2 Layer II", + "", + "", + "AC-3", + NULL + }; + + switch (id) { + case V4L2_CID_MPEG_STREAM_TYPE: + return (p->capabilities & CX2341X_CAP_HAS_TS) ? + mpeg_stream_type_with_ts : mpeg_stream_type_without_ts; + case V4L2_CID_MPEG_AUDIO_ENCODING: + return (p->capabilities & CX2341X_CAP_HAS_AC3) ? + mpeg_audio_encoding_l2_ac3 : v4l2_ctrl_get_menu(id); + case V4L2_CID_MPEG_AUDIO_L1_BITRATE: + case V4L2_CID_MPEG_AUDIO_L3_BITRATE: + return NULL; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + return cx2341x_get_menu(id); + default: + return v4l2_ctrl_get_menu(id); + } +} +EXPORT_SYMBOL(cx2341x_ctrl_get_menu); + +static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params) +{ + params->audio_properties = + (params->audio_sampling_freq << 0) | + (params->audio_mode << 8) | + (params->audio_mode_extension << 10) | + (((params->audio_emphasis == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17) + ? 3 : params->audio_emphasis) << 12) | + (params->audio_crc << 14); + + if ((params->capabilities & CX2341X_CAP_HAS_AC3) && + params->audio_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) { + params->audio_properties |= + /* Not sure if this MPEG Layer II setting is required */ + ((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) | + (params->audio_ac3_bitrate << 4) | + (CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28); + } else { + /* Assuming MPEG Layer II */ + params->audio_properties |= + ((3 - params->audio_encoding) << 2) | + ((1 + params->audio_l2_bitrate) << 4); + } +} + +int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy, + struct v4l2_ext_controls *ctrls, unsigned int cmd) +{ + int err = 0; + int i; + + if (cmd == VIDIOC_G_EXT_CTRLS) { + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + + err = cx2341x_get_ctrl(params, ctrl); + if (err) { + ctrls->error_idx = i; + break; + } + } + return err; + } + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + struct v4l2_queryctrl qctrl; + const char * const *menu_items = NULL; + + qctrl.id = ctrl->id; + err = cx2341x_ctrl_query(params, &qctrl); + if (err) + break; + if (qctrl.type == V4L2_CTRL_TYPE_MENU) + menu_items = cx2341x_ctrl_get_menu(params, qctrl.id); + err = v4l2_ctrl_check(ctrl, &qctrl, menu_items); + if (err) + break; + err = cx2341x_set_ctrl(params, busy, ctrl); + if (err) + break; + } + if (err == 0 && + params->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR && + params->video_bitrate_peak < params->video_bitrate) { + err = -ERANGE; + ctrls->error_idx = ctrls->count; + } + if (err) + ctrls->error_idx = i; + else + cx2341x_calc_audio_properties(params); + return err; +} +EXPORT_SYMBOL(cx2341x_ext_ctrls); + +void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p) +{ + *p = default_params; + cx2341x_calc_audio_properties(p); +} +EXPORT_SYMBOL(cx2341x_fill_defaults); + +static int cx2341x_api(void *priv, cx2341x_mbox_func func, + u32 cmd, int args, ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list vargs; + int i; + + va_start(vargs, args); + + for (i = 0; i < args; i++) + data[i] = va_arg(vargs, int); + va_end(vargs); + return func(priv, cmd, args, 0, data); +} + +#define NEQ(field) (old->field != new->field) + +int cx2341x_update(void *priv, cx2341x_mbox_func func, + const struct cx2341x_mpeg_params *old, + const struct cx2341x_mpeg_params *new) +{ + static int mpeg_stream_type[] = { + 0, /* MPEG-2 PS */ + 1, /* MPEG-2 TS */ + 2, /* MPEG-1 SS */ + 14, /* DVD */ + 11, /* VCD */ + 12, /* SVCD */ + }; + + int err = 0; + int force = (old == NULL); + u16 temporal = new->video_temporal_filter; + + cx2341x_api(priv, func, CX2341X_ENC_SET_OUTPUT_PORT, 2, new->port, 0); + + if (force || NEQ(is_50hz)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_RATE, 1, + new->is_50hz); + if (err) return err; + } + + if (force || NEQ(width) || NEQ(height) || NEQ(video_encoding)) { + u16 w = new->width; + u16 h = new->height; + + if (new->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) { + w /= 2; + h /= 2; + } + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_SIZE, 2, + h, w); + if (err) return err; + } + if (force || NEQ(stream_type)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_STREAM_TYPE, 1, + mpeg_stream_type[new->stream_type]); + if (err) return err; + } + if (force || NEQ(video_aspect)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_ASPECT_RATIO, 1, + 1 + new->video_aspect); + if (err) return err; + } + if (force || NEQ(video_b_frames) || NEQ(video_gop_size)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_PROPERTIES, 2, + new->video_gop_size, new->video_b_frames + 1); + if (err) return err; + } + if (force || NEQ(video_gop_closure)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_CLOSURE, 1, + new->video_gop_closure); + if (err) return err; + } + if (force || NEQ(audio_properties)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_AUDIO_PROPERTIES, + 1, new->audio_properties); + if (err) return err; + } + if (force || NEQ(audio_mute)) { + err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_AUDIO, 1, + new->audio_mute); + if (err) return err; + } + if (force || NEQ(video_bitrate_mode) || NEQ(video_bitrate) || + NEQ(video_bitrate_peak)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_BIT_RATE, 5, + new->video_bitrate_mode, new->video_bitrate, + new->video_bitrate_peak / 400, 0, 0); + if (err) return err; + } + if (force || NEQ(video_spatial_filter_mode) || + NEQ(video_temporal_filter_mode) || + NEQ(video_median_filter_type)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_MODE, + 2, new->video_spatial_filter_mode | + (new->video_temporal_filter_mode << 1), + new->video_median_filter_type); + if (err) return err; + } + if (force || NEQ(video_luma_median_filter_bottom) || + NEQ(video_luma_median_filter_top) || + NEQ(video_chroma_median_filter_bottom) || + NEQ(video_chroma_median_filter_top)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_CORING_LEVELS, 4, + new->video_luma_median_filter_bottom, + new->video_luma_median_filter_top, + new->video_chroma_median_filter_bottom, + new->video_chroma_median_filter_top); + if (err) return err; + } + if (force || NEQ(video_luma_spatial_filter_type) || + NEQ(video_chroma_spatial_filter_type)) { + err = cx2341x_api(priv, func, + CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, + 2, new->video_luma_spatial_filter_type, + new->video_chroma_spatial_filter_type); + if (err) return err; + } + if (force || NEQ(video_spatial_filter) || + old->video_temporal_filter != temporal) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_PROPS, + 2, new->video_spatial_filter, temporal); + if (err) return err; + } + if (force || NEQ(video_temporal_decimation)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_DROP_RATE, + 1, new->video_temporal_decimation); + if (err) return err; + } + if (force || NEQ(video_mute) || + (new->video_mute && NEQ(video_mute_yuv))) { + err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_VIDEO, 1, + new->video_mute | (new->video_mute_yuv << 8)); + if (err) return err; + } + if (force || NEQ(stream_insert_nav_packets)) { + err = cx2341x_api(priv, func, CX2341X_ENC_MISC, 2, + 7, new->stream_insert_nav_packets); + if (err) return err; + } + return 0; +} +EXPORT_SYMBOL(cx2341x_update); + +static const char *cx2341x_menu_item(const struct cx2341x_mpeg_params *p, u32 id) +{ + const char * const *menu = cx2341x_ctrl_get_menu(p, id); + struct v4l2_ext_control ctrl; + + if (menu == NULL) + goto invalid; + ctrl.id = id; + if (cx2341x_get_ctrl(p, &ctrl)) + goto invalid; + while (ctrl.value-- && *menu) menu++; + if (*menu == NULL) + goto invalid; + return *menu; + +invalid: + return ""; +} + +void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix) +{ + int is_mpeg1 = p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; + + /* Stream */ + printk(KERN_INFO "%s: Stream: %s", + prefix, + cx2341x_menu_item(p, V4L2_CID_MPEG_STREAM_TYPE)); + if (p->stream_insert_nav_packets) + printk(" (with navigation packets)"); + printk("\n"); + printk(KERN_INFO "%s: VBI Format: %s\n", + prefix, + cx2341x_menu_item(p, V4L2_CID_MPEG_STREAM_VBI_FMT)); + + /* Video */ + printk(KERN_INFO "%s: Video: %dx%d, %d fps%s\n", + prefix, + p->width / (is_mpeg1 ? 2 : 1), p->height / (is_mpeg1 ? 2 : 1), + p->is_50hz ? 25 : 30, + (p->video_mute) ? " (muted)" : ""); + printk(KERN_INFO "%s: Video: %s, %s, %s, %d", + prefix, + cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_ENCODING), + cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_ASPECT), + cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_BITRATE_MODE), + p->video_bitrate); + if (p->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) + printk(", Peak %d", p->video_bitrate_peak); + printk("\n"); + printk(KERN_INFO + "%s: Video: GOP Size %d, %d B-Frames, %sGOP Closure\n", + prefix, + p->video_gop_size, p->video_b_frames, + p->video_gop_closure ? "" : "No "); + if (p->video_temporal_decimation) + printk(KERN_INFO "%s: Video: Temporal Decimation %d\n", + prefix, p->video_temporal_decimation); + + /* Audio */ + printk(KERN_INFO "%s: Audio: %s, %s, %s, %s%s", + prefix, + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ), + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_ENCODING), + cx2341x_menu_item(p, + p->audio_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3 + ? V4L2_CID_MPEG_AUDIO_AC3_BITRATE + : V4L2_CID_MPEG_AUDIO_L2_BITRATE), + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_MODE), + p->audio_mute ? " (muted)" : ""); + if (p->audio_mode == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) + printk(", %s", cx2341x_menu_item(p, + V4L2_CID_MPEG_AUDIO_MODE_EXTENSION)); + printk(", %s, %s\n", + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_EMPHASIS), + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_CRC)); + + /* Encoding filters */ + printk(KERN_INFO "%s: Spatial Filter: %s, Luma %s, Chroma %s, %d\n", + prefix, + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE), + p->video_spatial_filter); + + printk(KERN_INFO "%s: Temporal Filter: %s, %d\n", + prefix, + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE), + p->video_temporal_filter); + printk(KERN_INFO + "%s: Median Filter: %s, Luma [%d, %d], Chroma [%d, %d]\n", + prefix, + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE), + p->video_luma_median_filter_bottom, + p->video_luma_median_filter_top, + p->video_chroma_median_filter_bottom, + p->video_chroma_median_filter_top); +} +EXPORT_SYMBOL(cx2341x_log_status); + + + +/********************** NEW CODE *********************/ + +static inline struct cx2341x_handler *to_cxhdl(struct v4l2_ctrl *ctrl) +{ + return container_of(ctrl->handler, struct cx2341x_handler, hdl); +} + +static int cx2341x_hdl_api(struct cx2341x_handler *hdl, + u32 cmd, int args, ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list vargs; + int i; + + va_start(vargs, args); + + for (i = 0; i < args; i++) + data[i] = va_arg(vargs, int); + va_end(vargs); + return hdl->func(hdl->priv, cmd, args, 0, data); +} + +/* ctrl->handler->lock is held, so it is safe to access cur.val */ +static inline int cx2341x_neq(struct v4l2_ctrl *ctrl) +{ + return ctrl && ctrl->val != ctrl->cur.val; +} + +static int cx2341x_try_ctrl(struct v4l2_ctrl *ctrl) +{ + struct cx2341x_handler *hdl = to_cxhdl(ctrl); + s32 val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_MPEG_VIDEO_B_FRAMES: { + /* video gop cluster */ + int b = val + 1; + int gop = hdl->video_gop_size->val; + + gop = b * ((gop + b - 1) / b); + + /* Max GOP size = 34 */ + while (gop > 34) + gop -= b; + hdl->video_gop_size->val = gop; + break; + } + + case V4L2_CID_MPEG_STREAM_TYPE: + /* stream type cluster */ + hdl->video_encoding->val = + (hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_SS || + hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ? + V4L2_MPEG_VIDEO_ENCODING_MPEG_1 : + V4L2_MPEG_VIDEO_ENCODING_MPEG_2; + if (hdl->video_encoding->val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) + /* MPEG-1 implies CBR */ + hdl->video_bitrate_mode->val = + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR; + /* peak bitrate shall be >= normal bitrate */ + if (hdl->video_bitrate_mode->val == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR && + hdl->video_bitrate_peak->val < hdl->video_bitrate->val) + hdl->video_bitrate_peak->val = hdl->video_bitrate->val; + break; + } + return 0; +} + +static int cx2341x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + static const int mpeg_stream_type[] = { + 0, /* MPEG-2 PS */ + 1, /* MPEG-2 TS */ + 2, /* MPEG-1 SS */ + 14, /* DVD */ + 11, /* VCD */ + 12, /* SVCD */ + }; + struct cx2341x_handler *hdl = to_cxhdl(ctrl); + s32 val = ctrl->val; + u32 props; + int err; + + switch (ctrl->id) { + case V4L2_CID_MPEG_STREAM_VBI_FMT: + if (hdl->ops && hdl->ops->s_stream_vbi_fmt) + return hdl->ops->s_stream_vbi_fmt(hdl, val); + return 0; + + case V4L2_CID_MPEG_VIDEO_ASPECT: + return cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_ASPECT_RATIO, 1, val + 1); + + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_CLOSURE, 1, val); + + case V4L2_CID_MPEG_AUDIO_MUTE: + return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_AUDIO, 1, val); + + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: + return cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_FRAME_DROP_RATE, 1, val); + + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + return cx2341x_hdl_api(hdl, CX2341X_ENC_MISC, 2, 7, val); + + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + /* audio properties cluster */ + props = (hdl->audio_sampling_freq->val << 0) | + (hdl->audio_mode->val << 8) | + (hdl->audio_mode_extension->val << 10) | + (hdl->audio_crc->val << 14); + if (hdl->audio_emphasis->val == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17) + props |= 3 << 12; + else + props |= hdl->audio_emphasis->val << 12; + + if (hdl->audio_encoding->val == V4L2_MPEG_AUDIO_ENCODING_AC3) { + props |= +#if 1 + /* Not sure if this MPEG Layer II setting is required */ + ((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) | +#endif + (hdl->audio_ac3_bitrate->val << 4) | + (CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28); + } else { + /* Assuming MPEG Layer II */ + props |= + ((3 - hdl->audio_encoding->val) << 2) | + ((1 + hdl->audio_l2_bitrate->val) << 4); + } + err = cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, props); + if (err) + return err; + + hdl->audio_properties = props; + if (hdl->audio_ac3_bitrate) { + int is_ac3 = hdl->audio_encoding->val == + V4L2_MPEG_AUDIO_ENCODING_AC3; + + v4l2_ctrl_activate(hdl->audio_ac3_bitrate, is_ac3); + v4l2_ctrl_activate(hdl->audio_l2_bitrate, !is_ac3); + } + v4l2_ctrl_activate(hdl->audio_mode_extension, + hdl->audio_mode->val == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO); + if (cx2341x_neq(hdl->audio_sampling_freq) && + hdl->ops && hdl->ops->s_audio_sampling_freq) + return hdl->ops->s_audio_sampling_freq(hdl, hdl->audio_sampling_freq->val); + if (cx2341x_neq(hdl->audio_mode) && + hdl->ops && hdl->ops->s_audio_mode) + return hdl->ops->s_audio_mode(hdl, hdl->audio_mode->val); + return 0; + + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + /* video gop cluster */ + return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_PROPERTIES, 2, + hdl->video_gop_size->val, + hdl->video_b_frames->val + 1); + + case V4L2_CID_MPEG_STREAM_TYPE: + /* stream type cluster */ + err = cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_STREAM_TYPE, 1, mpeg_stream_type[val]); + if (err) + return err; + + err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_BIT_RATE, 5, + hdl->video_bitrate_mode->val, + hdl->video_bitrate->val, + hdl->video_bitrate_peak->val / 400, 0, 0); + if (err) + return err; + + v4l2_ctrl_activate(hdl->video_bitrate_mode, + hdl->video_encoding->val != V4L2_MPEG_VIDEO_ENCODING_MPEG_1); + v4l2_ctrl_activate(hdl->video_bitrate_peak, + hdl->video_bitrate_mode->val != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR); + if (cx2341x_neq(hdl->video_encoding) && + hdl->ops && hdl->ops->s_video_encoding) + return hdl->ops->s_video_encoding(hdl, hdl->video_encoding->val); + return 0; + + case V4L2_CID_MPEG_VIDEO_MUTE: + /* video mute cluster */ + return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_VIDEO, 1, + hdl->video_mute->val | + (hdl->video_mute_yuv->val << 8)); + + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: { + int active_filter; + + /* video filter mode */ + err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_MODE, 2, + hdl->video_spatial_filter_mode->val | + (hdl->video_temporal_filter_mode->val << 1), + hdl->video_median_filter_type->val); + if (err) + return err; + + active_filter = hdl->video_spatial_filter_mode->val != + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO; + v4l2_ctrl_activate(hdl->video_spatial_filter, active_filter); + v4l2_ctrl_activate(hdl->video_luma_spatial_filter_type, active_filter); + v4l2_ctrl_activate(hdl->video_chroma_spatial_filter_type, active_filter); + active_filter = hdl->video_temporal_filter_mode->val != + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO; + v4l2_ctrl_activate(hdl->video_temporal_filter, active_filter); + active_filter = hdl->video_median_filter_type->val != + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF; + v4l2_ctrl_activate(hdl->video_luma_median_filter_bottom, active_filter); + v4l2_ctrl_activate(hdl->video_luma_median_filter_top, active_filter); + v4l2_ctrl_activate(hdl->video_chroma_median_filter_bottom, active_filter); + v4l2_ctrl_activate(hdl->video_chroma_median_filter_top, active_filter); + return 0; + } + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + /* video filter type cluster */ + return cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, 2, + hdl->video_luma_spatial_filter_type->val, + hdl->video_chroma_spatial_filter_type->val); + + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + /* video filter cluster */ + return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_PROPS, 2, + hdl->video_spatial_filter->val, + hdl->video_temporal_filter->val); + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + /* video median cluster */ + return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_CORING_LEVELS, 4, + hdl->video_luma_median_filter_bottom->val, + hdl->video_luma_median_filter_top->val, + hdl->video_chroma_median_filter_bottom->val, + hdl->video_chroma_median_filter_top->val); + } + return -EINVAL; +} + +static const struct v4l2_ctrl_ops cx2341x_ops = { + .try_ctrl = cx2341x_try_ctrl, + .s_ctrl = cx2341x_s_ctrl, +}; + +static struct v4l2_ctrl *cx2341x_ctrl_new_custom(struct v4l2_ctrl_handler *hdl, + u32 id, s32 min, s32 max, s32 step, s32 def) +{ + struct v4l2_ctrl_config cfg; + + cx2341x_ctrl_fill(id, &cfg.name, &cfg.type, &min, &max, &step, &def, &cfg.flags); + cfg.ops = &cx2341x_ops; + cfg.id = id; + cfg.min = min; + cfg.max = max; + cfg.def = def; + if (cfg.type == V4L2_CTRL_TYPE_MENU) { + cfg.step = 0; + cfg.menu_skip_mask = step; + cfg.qmenu = cx2341x_get_menu(id); + } else { + cfg.step = step; + cfg.menu_skip_mask = 0; + } + return v4l2_ctrl_new_custom(hdl, &cfg, NULL); +} + +static struct v4l2_ctrl *cx2341x_ctrl_new_std(struct v4l2_ctrl_handler *hdl, + u32 id, s32 min, s32 max, s32 step, s32 def) +{ + return v4l2_ctrl_new_std(hdl, &cx2341x_ops, id, min, max, step, def); +} + +static struct v4l2_ctrl *cx2341x_ctrl_new_menu(struct v4l2_ctrl_handler *hdl, + u32 id, s32 max, s32 mask, s32 def) +{ + return v4l2_ctrl_new_std_menu(hdl, &cx2341x_ops, id, max, mask, def); +} + +int cx2341x_handler_init(struct cx2341x_handler *cxhdl, + unsigned nr_of_controls_hint) +{ + struct v4l2_ctrl_handler *hdl = &cxhdl->hdl; + u32 caps = cxhdl->capabilities; + int has_sliced_vbi = caps & CX2341X_CAP_HAS_SLICED_VBI; + int has_ac3 = caps & CX2341X_CAP_HAS_AC3; + int has_ts = caps & CX2341X_CAP_HAS_TS; + + cxhdl->width = 720; + cxhdl->height = 480; + + v4l2_ctrl_handler_init(hdl, nr_of_controls_hint); + + /* Add controls in ascending control ID order for fastest + insertion time. */ + cxhdl->stream_type = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_STREAM_TYPE, + V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, has_ts ? 0 : 2, + V4L2_MPEG_STREAM_TYPE_MPEG2_PS); + cxhdl->stream_vbi_fmt = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_STREAM_VBI_FMT, + V4L2_MPEG_STREAM_VBI_FMT_IVTV, has_sliced_vbi ? 0 : 2, + V4L2_MPEG_STREAM_VBI_FMT_NONE); + cxhdl->audio_sampling_freq = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 0, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000); + cxhdl->audio_encoding = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_ENCODING, + V4L2_MPEG_AUDIO_ENCODING_AC3, has_ac3 ? ~0x12 : ~0x2, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2); + cxhdl->audio_l2_bitrate = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_L2_BITRATE, + V4L2_MPEG_AUDIO_L2_BITRATE_384K, 0x1ff, + V4L2_MPEG_AUDIO_L2_BITRATE_224K); + cxhdl->audio_mode = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_MODE, + V4L2_MPEG_AUDIO_MODE_MONO, 0, + V4L2_MPEG_AUDIO_MODE_STEREO); + cxhdl->audio_mode_extension = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_MODE_EXTENSION, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 0, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4); + cxhdl->audio_emphasis = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_EMPHASIS, + V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 0, + V4L2_MPEG_AUDIO_EMPHASIS_NONE); + cxhdl->audio_crc = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_CRC, + V4L2_MPEG_AUDIO_CRC_CRC16, 0, + V4L2_MPEG_AUDIO_CRC_NONE); + + cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_AUDIO_MUTE, 0, 1, 1, 0); + if (has_ac3) + cxhdl->audio_ac3_bitrate = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_AC3_BITRATE, + V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 0x03, + V4L2_MPEG_AUDIO_AC3_BITRATE_224K); + cxhdl->video_encoding = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_VIDEO_ENCODING, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 0, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2); + cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_VIDEO_ASPECT, + V4L2_MPEG_VIDEO_ASPECT_221x100, 0, + V4L2_MPEG_VIDEO_ASPECT_4x3); + cxhdl->video_b_frames = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_B_FRAMES, 0, 33, 1, 2); + cxhdl->video_gop_size = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_GOP_SIZE, + 1, 34, 1, cxhdl->is_50hz ? 12 : 15); + cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, 0, 1, 1, 1); + cxhdl->video_bitrate_mode = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_VIDEO_BITRATE_MODE, + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); + cxhdl->video_bitrate = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_BITRATE, + 0, 27000000, 1, 6000000); + cxhdl->video_bitrate_peak = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, + 0, 27000000, 1, 8000000); + cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, 0, 255, 1, 0); + cxhdl->video_mute = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_MUTE, 0, 1, 1, 0); + cxhdl->video_mute_yuv = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_MUTE_YUV, 0, 0xffffff, 1, 0x008080); + + /* CX23415/6 specific */ + cxhdl->video_spatial_filter_mode = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 0, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL); + cxhdl->video_spatial_filter = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER, + 0, 15, 1, 0); + cxhdl->video_luma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE, + 0, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR); + cxhdl->video_chroma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, + 0, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR); + cxhdl->video_temporal_filter_mode = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO, + 0, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL); + cxhdl->video_temporal_filter = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER, + 0, 31, 1, 8); + cxhdl->video_median_filter_type = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG, + 0, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF); + cxhdl->video_luma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM, + 0, 255, 1, 0); + cxhdl->video_luma_median_filter_top = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP, + 0, 255, 1, 255); + cxhdl->video_chroma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM, + 0, 255, 1, 0); + cxhdl->video_chroma_median_filter_top = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP, + 0, 255, 1, 255); + cx2341x_ctrl_new_custom(hdl, V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS, + 0, 1, 1, 0); + + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + return err; + } + + v4l2_ctrl_cluster(8, &cxhdl->audio_sampling_freq); + v4l2_ctrl_cluster(2, &cxhdl->video_b_frames); + v4l2_ctrl_cluster(5, &cxhdl->stream_type); + v4l2_ctrl_cluster(2, &cxhdl->video_mute); + v4l2_ctrl_cluster(3, &cxhdl->video_spatial_filter_mode); + v4l2_ctrl_cluster(2, &cxhdl->video_luma_spatial_filter_type); + v4l2_ctrl_cluster(2, &cxhdl->video_spatial_filter); + v4l2_ctrl_cluster(4, &cxhdl->video_luma_median_filter_top); + + return 0; +} +EXPORT_SYMBOL(cx2341x_handler_init); + +void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz) +{ + cxhdl->is_50hz = is_50hz; + cxhdl->video_gop_size->default_value = cxhdl->is_50hz ? 12 : 15; +} +EXPORT_SYMBOL(cx2341x_handler_set_50hz); + +int cx2341x_handler_setup(struct cx2341x_handler *cxhdl) +{ + int h = cxhdl->height; + int w = cxhdl->width; + int err; + + err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_OUTPUT_PORT, 2, cxhdl->port, 0); + if (err) + return err; + err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_RATE, 1, cxhdl->is_50hz); + if (err) + return err; + + if (v4l2_ctrl_g_ctrl(cxhdl->video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) { + w /= 2; + h /= 2; + } + err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_SIZE, 2, h, w); + if (err) + return err; + return v4l2_ctrl_handler_setup(&cxhdl->hdl); +} +EXPORT_SYMBOL(cx2341x_handler_setup); + +void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy) +{ + v4l2_ctrl_grab(cxhdl->audio_sampling_freq, busy); + v4l2_ctrl_grab(cxhdl->audio_encoding, busy); + v4l2_ctrl_grab(cxhdl->audio_l2_bitrate, busy); + v4l2_ctrl_grab(cxhdl->audio_ac3_bitrate, busy); + v4l2_ctrl_grab(cxhdl->stream_vbi_fmt, busy); + v4l2_ctrl_grab(cxhdl->stream_type, busy); + v4l2_ctrl_grab(cxhdl->video_bitrate_mode, busy); + v4l2_ctrl_grab(cxhdl->video_bitrate, busy); + v4l2_ctrl_grab(cxhdl->video_bitrate_peak, busy); +} +EXPORT_SYMBOL(cx2341x_handler_set_busy); diff --git a/drivers/media/common/cypress_firmware.c b/drivers/media/common/cypress_firmware.c new file mode 100644 index 00000000..577e8205 --- /dev/null +++ b/drivers/media/common/cypress_firmware.c @@ -0,0 +1,132 @@ +/* cypress_firmware.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for downloading the firmware to Cypress FX 1 + * and 2 based devices. + * + */ + +#include +#include +#include +#include +#include "cypress_firmware.h" + +struct usb_cypress_controller { + u8 id; + const char *name; /* name of the usb controller */ + u16 cs_reg; /* needs to be restarted, + * when the firmware has been downloaded */ +}; + +static const struct usb_cypress_controller cypress[] = { + { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cs_reg = 0x7f92 }, + { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cs_reg = 0x7f92 }, + { .id = CYPRESS_FX2, .name = "Cypress FX2", .cs_reg = 0xe600 }, +}; + +/* + * load a firmware packet to the device + */ +static int usb_cypress_writemem(struct usb_device *udev, u16 addr, u8 *data, + u8 len) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000); +} + +static int cypress_get_hexline(const struct firmware *fw, + struct hexline *hx, int *pos) +{ + u8 *b = (u8 *) &fw->data[*pos]; + int data_offs = 4; + + if (*pos >= fw->size) + return 0; + + memset(hx, 0, sizeof(struct hexline)); + hx->len = b[0]; + + if ((*pos + hx->len + 4) >= fw->size) + return -EINVAL; + + hx->addr = b[1] | (b[2] << 8); + hx->type = b[3]; + + if (hx->type == 0x04) { + /* b[4] and b[5] are the Extended linear address record data + * field */ + hx->addr |= (b[4] << 24) | (b[5] << 16); + } + + memcpy(hx->data, &b[data_offs], hx->len); + hx->chk = b[hx->len + data_offs]; + *pos += hx->len + 5; + + return *pos; +} + +int cypress_load_firmware(struct usb_device *udev, + const struct firmware *fw, int type) +{ + struct hexline *hx; + int ret, pos = 0; + + hx = kmalloc(sizeof(struct hexline), GFP_KERNEL); + if (!hx) { + dev_err(&udev->dev, "%s: kmalloc() failed\n", KBUILD_MODNAME); + return -ENOMEM; + } + + /* stop the CPU */ + hx->data[0] = 1; + ret = usb_cypress_writemem(udev, cypress[type].cs_reg, hx->data, 1); + if (ret != 1) { + dev_err(&udev->dev, "%s: CPU stop failed=%d\n", + KBUILD_MODNAME, ret); + ret = -EIO; + goto err_kfree; + } + + /* write firmware to memory */ + for (;;) { + ret = cypress_get_hexline(fw, hx, &pos); + if (ret < 0) + goto err_kfree; + else if (ret == 0) + break; + + ret = usb_cypress_writemem(udev, hx->addr, hx->data, hx->len); + if (ret < 0) { + goto err_kfree; + } else if (ret != hx->len) { + dev_err(&udev->dev, + "%s: error while transferring firmware (transferred size=%d, block size=%d)\n", + KBUILD_MODNAME, ret, hx->len); + ret = -EIO; + goto err_kfree; + } + } + + /* start the CPU */ + hx->data[0] = 0; + ret = usb_cypress_writemem(udev, cypress[type].cs_reg, hx->data, 1); + if (ret != 1) { + dev_err(&udev->dev, "%s: CPU start failed=%d\n", + KBUILD_MODNAME, ret); + ret = -EIO; + goto err_kfree; + } + + ret = 0; +err_kfree: + kfree(hx); + return ret; +} +EXPORT_SYMBOL(cypress_load_firmware); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Cypress firmware download"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/cypress_firmware.h b/drivers/media/common/cypress_firmware.h new file mode 100644 index 00000000..e493cbc7 --- /dev/null +++ b/drivers/media/common/cypress_firmware.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for downloading the firmware to Cypress FX 1 + * and 2 based devices. + * + */ + +#ifndef CYPRESS_FIRMWARE_H +#define CYPRESS_FIRMWARE_H + +#define CYPRESS_AN2135 0 +#define CYPRESS_AN2235 1 +#define CYPRESS_FX2 2 + +/* commonly used firmware download types and function */ +struct hexline { + u8 len; + u32 addr; + u8 type; + u8 data[255]; + u8 chk; +}; + +int cypress_load_firmware(struct usb_device *, const struct firmware *, int); + +#endif diff --git a/drivers/media/common/saa7146/Kconfig b/drivers/media/common/saa7146/Kconfig new file mode 100644 index 00000000..769c6f81 --- /dev/null +++ b/drivers/media/common/saa7146/Kconfig @@ -0,0 +1,9 @@ +config VIDEO_SAA7146 + tristate + depends on I2C && PCI + +config VIDEO_SAA7146_VV + tristate + depends on VIDEO_V4L2 + select VIDEOBUF_DMA_SG + select VIDEO_SAA7146 diff --git a/drivers/media/common/saa7146/Makefile b/drivers/media/common/saa7146/Makefile new file mode 100644 index 00000000..3219b00a --- /dev/null +++ b/drivers/media/common/saa7146/Makefile @@ -0,0 +1,5 @@ +saa7146-objs := saa7146_i2c.o saa7146_core.o +saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o + +obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o +obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o diff --git a/drivers/media/common/saa7146/saa7146_core.c b/drivers/media/common/saa7146/saa7146_core.c new file mode 100644 index 00000000..bb6ee519 --- /dev/null +++ b/drivers/media/common/saa7146/saa7146_core.c @@ -0,0 +1,592 @@ +/* + saa7146.o - driver for generic saa7146-based hardware + + Copyright (C) 1998-2003 Michael Hunold + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include + +static int saa7146_num; + +unsigned int saa7146_debug; + +module_param(saa7146_debug, uint, 0644); +MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)"); + +#if 0 +static void dump_registers(struct saa7146_dev* dev) +{ + int i = 0; + + pr_info(" @ %li jiffies:\n", jiffies); + for (i = 0; i <= 0x148; i += 4) + pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i)); +} +#endif + +/**************************************************************************** + * gpio and debi helper functions + ****************************************************************************/ + +void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data) +{ + u32 value = 0; + + BUG_ON(port > 3); + + value = saa7146_read(dev, GPIO_CTRL); + value &= ~(0xff << (8*port)); + value |= (data << (8*port)); + saa7146_write(dev, GPIO_CTRL, value); +} + +/* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */ +static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev, + unsigned long us1, unsigned long us2) +{ + unsigned long timeout; + int err; + + /* wait for registers to be programmed */ + timeout = jiffies + usecs_to_jiffies(us1); + while (1) { + err = time_after(jiffies, timeout); + if (saa7146_read(dev, MC2) & 2) + break; + if (err) { + pr_err("%s: %s timed out while waiting for registers getting programmed\n", + dev->name, __func__); + return -ETIMEDOUT; + } + msleep(1); + } + + /* wait for transfer to complete */ + timeout = jiffies + usecs_to_jiffies(us2); + while (1) { + err = time_after(jiffies, timeout); + if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S)) + break; + saa7146_read(dev, MC2); + if (err) { + DEB_S("%s: %s timed out while waiting for transfer completion\n", + dev->name, __func__); + return -ETIMEDOUT; + } + msleep(1); + } + + return 0; +} + +static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev, + unsigned long us1, unsigned long us2) +{ + unsigned long loops; + + /* wait for registers to be programmed */ + loops = us1; + while (1) { + if (saa7146_read(dev, MC2) & 2) + break; + if (!loops--) { + pr_err("%s: %s timed out while waiting for registers getting programmed\n", + dev->name, __func__); + return -ETIMEDOUT; + } + udelay(1); + } + + /* wait for transfer to complete */ + loops = us2 / 5; + while (1) { + if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S)) + break; + saa7146_read(dev, MC2); + if (!loops--) { + DEB_S("%s: %s timed out while waiting for transfer completion\n", + dev->name, __func__); + return -ETIMEDOUT; + } + udelay(5); + } + + return 0; +} + +int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop) +{ + if (nobusyloop) + return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000); + else + return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000); +} + +/**************************************************************************** + * general helper functions + ****************************************************************************/ + +/* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c + make sure virt has been allocated with vmalloc_32(), otherwise the BUG() + may be triggered on highmem machines */ +static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages) +{ + struct scatterlist *sglist; + struct page *pg; + int i; + + sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL); + if (NULL == sglist) + return NULL; + sg_init_table(sglist, nr_pages); + for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) { + pg = vmalloc_to_page(virt); + if (NULL == pg) + goto err; + BUG_ON(PageHighMem(pg)); + sg_set_page(&sglist[i], pg, PAGE_SIZE, 0); + } + return sglist; + + err: + kfree(sglist); + return NULL; +} + +/********************************************************************************/ +/* common page table functions */ + +void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt) +{ + int pages = (length+PAGE_SIZE-1)/PAGE_SIZE; + void *mem = vmalloc_32(length); + int slen = 0; + + if (NULL == mem) + goto err_null; + + if (!(pt->slist = vmalloc_to_sg(mem, pages))) + goto err_free_mem; + + if (saa7146_pgtable_alloc(pci, pt)) + goto err_free_slist; + + pt->nents = pages; + slen = pci_map_sg(pci,pt->slist,pt->nents,PCI_DMA_FROMDEVICE); + if (0 == slen) + goto err_free_pgtable; + + if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen)) + goto err_unmap_sg; + + return mem; + +err_unmap_sg: + pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE); +err_free_pgtable: + saa7146_pgtable_free(pci, pt); +err_free_slist: + kfree(pt->slist); + pt->slist = NULL; +err_free_mem: + vfree(mem); +err_null: + return NULL; +} + +void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt) +{ + pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE); + saa7146_pgtable_free(pci, pt); + kfree(pt->slist); + pt->slist = NULL; + vfree(mem); +} + +void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt) +{ + if (NULL == pt->cpu) + return; + pci_free_consistent(pci, pt->size, pt->cpu, pt->dma); + pt->cpu = NULL; +} + +int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt) +{ + __le32 *cpu; + dma_addr_t dma_addr = 0; + + cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr); + if (NULL == cpu) { + return -ENOMEM; + } + pt->size = PAGE_SIZE; + pt->cpu = cpu; + pt->dma = dma_addr; + + return 0; +} + +int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, + struct scatterlist *list, int sglen ) +{ + __le32 *ptr, fill; + int nr_pages = 0; + int i,p; + + BUG_ON(0 == sglen); + BUG_ON(list->offset > PAGE_SIZE); + + /* if we have a user buffer, the first page may not be + aligned to a page boundary. */ + pt->offset = list->offset; + + ptr = pt->cpu; + for (i = 0; i < sglen; i++, list++) { +/* + pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n", + i, sg_dma_address(list), sg_dma_len(list), + list->offset); +*/ + for (p = 0; p * 4096 < list->length; p++, ptr++) { + *ptr = cpu_to_le32(sg_dma_address(list) + p * 4096); + nr_pages++; + } + } + + + /* safety; fill the page table up with the last valid page */ + fill = *(ptr-1); + for(i=nr_pages;i<1024;i++) { + *ptr++ = fill; + } + +/* + ptr = pt->cpu; + pr_debug("offset: %d\n", pt->offset); + for(i=0;i<5;i++) { + pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]); + } +*/ + return 0; +} + +/********************************************************************************/ +/* interrupt handler */ +static irqreturn_t interrupt_hw(int irq, void *dev_id) +{ + struct saa7146_dev *dev = dev_id; + u32 isr; + u32 ack_isr; + + /* read out the interrupt status register */ + ack_isr = isr = saa7146_read(dev, ISR); + + /* is this our interrupt? */ + if ( 0 == isr ) { + /* nope, some other device */ + return IRQ_NONE; + } + + if (dev->ext) { + if (dev->ext->irq_mask & isr) { + if (dev->ext->irq_func) + dev->ext->irq_func(dev, &isr); + isr &= ~dev->ext->irq_mask; + } + } + if (0 != (isr & (MASK_27))) { + DEB_INT("irq: RPS0 (0x%08x)\n", isr); + if (dev->vv_data && dev->vv_callback) + dev->vv_callback(dev,isr); + isr &= ~MASK_27; + } + if (0 != (isr & (MASK_28))) { + if (dev->vv_data && dev->vv_callback) + dev->vv_callback(dev,isr); + isr &= ~MASK_28; + } + if (0 != (isr & (MASK_16|MASK_17))) { + SAA7146_IER_DISABLE(dev, MASK_16|MASK_17); + /* only wake up if we expect something */ + if (0 != dev->i2c_op) { + dev->i2c_op = 0; + wake_up(&dev->i2c_wq); + } else { + u32 psr = saa7146_read(dev, PSR); + u32 ssr = saa7146_read(dev, SSR); + pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n", + dev->name, isr, psr, ssr); + } + isr &= ~(MASK_16|MASK_17); + } + if( 0 != isr ) { + ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n", + isr); + ERR("disabling interrupt source(s)!\n"); + SAA7146_IER_DISABLE(dev,isr); + } + saa7146_write(dev, ISR, ack_isr); + return IRQ_HANDLED; +} + +/*********************************************************************************/ +/* configuration-functions */ + +static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent) +{ + struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data; + struct saa7146_extension *ext = pci_ext->ext; + struct saa7146_dev *dev; + int err = -ENOMEM; + + /* clear out mem for sure */ + dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL); + if (!dev) { + ERR("out of memory\n"); + goto out; + } + + DEB_EE("pci:%p\n", pci); + + err = pci_enable_device(pci); + if (err < 0) { + ERR("pci_enable_device() failed\n"); + goto err_free; + } + + /* enable bus-mastering */ + pci_set_master(pci); + + dev->pci = pci; + + /* get chip-revision; this is needed to enable bug-fixes */ + dev->revision = pci->revision; + + /* remap the memory from virtual to physical address */ + + err = pci_request_region(pci, 0, "saa7146"); + if (err < 0) + goto err_disable; + + dev->mem = ioremap(pci_resource_start(pci, 0), + pci_resource_len(pci, 0)); + if (!dev->mem) { + ERR("ioremap() failed\n"); + err = -ENODEV; + goto err_release; + } + + /* we don't do a master reset here anymore, it screws up + some boards that don't have an i2c-eeprom for configuration + values */ +/* + saa7146_write(dev, MC1, MASK_31); +*/ + + /* disable all irqs */ + saa7146_write(dev, IER, 0); + + /* shut down all dma transfers and rps tasks */ + saa7146_write(dev, MC1, 0x30ff0000); + + /* clear out any rps-signals pending */ + saa7146_write(dev, MC2, 0xf8000000); + + /* request an interrupt for the saa7146 */ + err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED | IRQF_DISABLED, + dev->name, dev); + if (err < 0) { + ERR("request_irq() failed\n"); + goto err_unmap; + } + + err = -ENOMEM; + + /* get memory for various stuff */ + dev->d_rps0.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM, + &dev->d_rps0.dma_handle); + if (!dev->d_rps0.cpu_addr) + goto err_free_irq; + memset(dev->d_rps0.cpu_addr, 0x0, SAA7146_RPS_MEM); + + dev->d_rps1.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM, + &dev->d_rps1.dma_handle); + if (!dev->d_rps1.cpu_addr) + goto err_free_rps0; + memset(dev->d_rps1.cpu_addr, 0x0, SAA7146_RPS_MEM); + + dev->d_i2c.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM, + &dev->d_i2c.dma_handle); + if (!dev->d_i2c.cpu_addr) + goto err_free_rps1; + memset(dev->d_i2c.cpu_addr, 0x0, SAA7146_RPS_MEM); + + /* the rest + print status message */ + + /* create a nice device name */ + sprintf(dev->name, "saa7146 (%d)", saa7146_num); + + pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n", + dev->mem, dev->revision, pci->irq, + pci->subsystem_vendor, pci->subsystem_device); + dev->ext = ext; + + mutex_init(&dev->v4l2_lock); + spin_lock_init(&dev->int_slock); + spin_lock_init(&dev->slock); + + mutex_init(&dev->i2c_lock); + + dev->module = THIS_MODULE; + init_waitqueue_head(&dev->i2c_wq); + + /* set some sane pci arbitrition values */ + saa7146_write(dev, PCI_BT_V1, 0x1c00101f); + + /* TODO: use the status code of the callback */ + + err = -ENODEV; + + if (ext->probe && ext->probe(dev)) { + DEB_D("ext->probe() failed for %p. skipping device.\n", dev); + goto err_free_i2c; + } + + if (ext->attach(dev, pci_ext)) { + DEB_D("ext->attach() failed for %p. skipping device.\n", dev); + goto err_free_i2c; + } + /* V4L extensions will set the pci drvdata to the v4l2_device in the + attach() above. So for those cards that do not use V4L we have to + set it explicitly. */ + pci_set_drvdata(pci, &dev->v4l2_dev); + + saa7146_num++; + + err = 0; +out: + return err; + +err_free_i2c: + pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr, + dev->d_i2c.dma_handle); +err_free_rps1: + pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr, + dev->d_rps1.dma_handle); +err_free_rps0: + pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr, + dev->d_rps0.dma_handle); +err_free_irq: + free_irq(pci->irq, (void *)dev); +err_unmap: + iounmap(dev->mem); +err_release: + pci_release_region(pci, 0); +err_disable: + pci_disable_device(pci); +err_free: + kfree(dev); + goto out; +} + +static void saa7146_remove_one(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); + struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev); + struct { + void *addr; + dma_addr_t dma; + } dev_map[] = { + { dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle }, + { dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle }, + { dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle }, + { NULL, 0 } + }, *p; + + DEB_EE("dev:%p\n", dev); + + dev->ext->detach(dev); + /* Zero the PCI drvdata after use. */ + pci_set_drvdata(pdev, NULL); + + /* shut down all video dma transfers */ + saa7146_write(dev, MC1, 0x00ff0000); + + /* disable all irqs, release irq-routine */ + saa7146_write(dev, IER, 0); + + free_irq(pdev->irq, dev); + + for (p = dev_map; p->addr; p++) + pci_free_consistent(pdev, SAA7146_RPS_MEM, p->addr, p->dma); + + iounmap(dev->mem); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + kfree(dev); + + saa7146_num--; +} + +/*********************************************************************************/ +/* extension handling functions */ + +int saa7146_register_extension(struct saa7146_extension* ext) +{ + DEB_EE("ext:%p\n", ext); + + ext->driver.name = ext->name; + ext->driver.id_table = ext->pci_tbl; + ext->driver.probe = saa7146_init_one; + ext->driver.remove = saa7146_remove_one; + + pr_info("register extension '%s'\n", ext->name); + return pci_register_driver(&ext->driver); +} + +int saa7146_unregister_extension(struct saa7146_extension* ext) +{ + DEB_EE("ext:%p\n", ext); + pr_info("unregister extension '%s'\n", ext->name); + pci_unregister_driver(&ext->driver); + return 0; +} + +EXPORT_SYMBOL_GPL(saa7146_register_extension); +EXPORT_SYMBOL_GPL(saa7146_unregister_extension); + +/* misc functions used by extension modules */ +EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc); +EXPORT_SYMBOL_GPL(saa7146_pgtable_free); +EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single); +EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable); +EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable); +EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done); + +EXPORT_SYMBOL_GPL(saa7146_setgpio); + +EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare); + +EXPORT_SYMBOL_GPL(saa7146_debug); + +MODULE_AUTHOR("Michael Hunold "); +MODULE_DESCRIPTION("driver for generic saa7146-based hardware"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/saa7146/saa7146_fops.c b/drivers/media/common/saa7146/saa7146_fops.c new file mode 100644 index 00000000..eda01bc6 --- /dev/null +++ b/drivers/media/common/saa7146/saa7146_fops.c @@ -0,0 +1,663 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include + +/****************************************************************************/ +/* resource management functions, shamelessly stolen from saa7134 driver */ + +int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + + if (fh->resources & bit) { + DEB_D("already allocated! want: 0x%02x, cur:0x%02x\n", + bit, vv->resources); + /* have it already allocated */ + return 1; + } + + /* is it free? */ + if (vv->resources & bit) { + DEB_D("locked! vv->resources:0x%02x, we want:0x%02x\n", + vv->resources, bit); + /* no, someone else uses it */ + return 0; + } + /* it's free, grab it */ + fh->resources |= bit; + vv->resources |= bit; + DEB_D("res: get 0x%02x, cur:0x%02x\n", bit, vv->resources); + return 1; +} + +void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + + BUG_ON((fh->resources & bits) != bits); + + fh->resources &= ~bits; + vv->resources &= ~bits; + DEB_D("res: put 0x%02x, cur:0x%02x\n", bits, vv->resources); +} + + +/********************************************************************************/ +/* common dma functions */ + +void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q, + struct saa7146_buf *buf) +{ + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + DEB_EE("dev:%p, buf:%p\n", dev, buf); + + BUG_ON(in_interrupt()); + + videobuf_waiton(q, &buf->vb, 0, 0); + videobuf_dma_unmap(q->dev, dma); + videobuf_dma_free(dma); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + + +/********************************************************************************/ +/* common buffer functions */ + +int saa7146_buffer_queue(struct saa7146_dev *dev, + struct saa7146_dmaqueue *q, + struct saa7146_buf *buf) +{ + assert_spin_locked(&dev->slock); + DEB_EE("dev:%p, dmaq:%p, buf:%p\n", dev, q, buf); + + BUG_ON(!q); + + if (NULL == q->curr) { + q->curr = buf; + DEB_D("immediately activating buffer %p\n", buf); + buf->activate(dev,buf,NULL); + } else { + list_add_tail(&buf->vb.queue,&q->queue); + buf->vb.state = VIDEOBUF_QUEUED; + DEB_D("adding buffer %p to queue. (active buffer present)\n", + buf); + } + return 0; +} + +void saa7146_buffer_finish(struct saa7146_dev *dev, + struct saa7146_dmaqueue *q, + int state) +{ + assert_spin_locked(&dev->slock); + DEB_EE("dev:%p, dmaq:%p, state:%d\n", dev, q, state); + DEB_EE("q->curr:%p\n", q->curr); + + BUG_ON(!q->curr); + + /* finish current buffer */ + if (NULL == q->curr) { + DEB_D("aiii. no current buffer\n"); + return; + } + + q->curr->vb.state = state; + v4l2_get_timestamp(&q->curr->vb.ts); + wake_up(&q->curr->vb.done); + + q->curr = NULL; +} + +void saa7146_buffer_next(struct saa7146_dev *dev, + struct saa7146_dmaqueue *q, int vbi) +{ + struct saa7146_buf *buf,*next = NULL; + + BUG_ON(!q); + + DEB_INT("dev:%p, dmaq:%p, vbi:%d\n", dev, q, vbi); + + assert_spin_locked(&dev->slock); + if (!list_empty(&q->queue)) { + /* activate next one from queue */ + buf = list_entry(q->queue.next,struct saa7146_buf,vb.queue); + list_del(&buf->vb.queue); + if (!list_empty(&q->queue)) + next = list_entry(q->queue.next,struct saa7146_buf, vb.queue); + q->curr = buf; + DEB_INT("next buffer: buf:%p, prev:%p, next:%p\n", + buf, q->queue.prev, q->queue.next); + buf->activate(dev,buf,next); + } else { + DEB_INT("no next buffer. stopping.\n"); + if( 0 != vbi ) { + /* turn off video-dma3 */ + saa7146_write(dev,MC1, MASK_20); + } else { + /* nothing to do -- just prevent next video-dma1 transfer + by lowering the protection address */ + + // fixme: fix this for vflip != 0 + + saa7146_write(dev, PROT_ADDR1, 0); + saa7146_write(dev, MC2, (MASK_02|MASK_18)); + + /* write the address of the rps-program */ + saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle); + /* turn on rps */ + saa7146_write(dev, MC1, (MASK_12 | MASK_28)); + +/* + printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1)); + printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1)); + printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1)); + printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1)); + printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1)); + printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1)); +*/ + } + del_timer(&q->timeout); + } +} + +void saa7146_buffer_timeout(unsigned long data) +{ + struct saa7146_dmaqueue *q = (struct saa7146_dmaqueue*)data; + struct saa7146_dev *dev = q->dev; + unsigned long flags; + + DEB_EE("dev:%p, dmaq:%p\n", dev, q); + + spin_lock_irqsave(&dev->slock,flags); + if (q->curr) { + DEB_D("timeout on %p\n", q->curr); + saa7146_buffer_finish(dev,q,VIDEOBUF_ERROR); + } + + /* we don't restart the transfer here like other drivers do. when + a streaming capture is disabled, the timeout function will be + called for the current buffer. if we activate the next buffer now, + we mess up our capture logic. if a timeout occurs on another buffer, + then something is seriously broken before, so no need to buffer the + next capture IMHO... */ +/* + saa7146_buffer_next(dev,q); +*/ + spin_unlock_irqrestore(&dev->slock,flags); +} + +/********************************************************************************/ +/* file operations */ + +static int fops_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct saa7146_dev *dev = video_drvdata(file); + struct saa7146_fh *fh = NULL; + int result = 0; + + DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev)); + + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + + DEB_D("using: %p\n", dev); + + /* check if an extension is registered */ + if( NULL == dev->ext ) { + DEB_S("no extension registered for this device\n"); + result = -ENODEV; + goto out; + } + + /* allocate per open data */ + fh = kzalloc(sizeof(*fh),GFP_KERNEL); + if (NULL == fh) { + DEB_S("cannot allocate memory for per open data\n"); + result = -ENOMEM; + goto out; + } + + v4l2_fh_init(&fh->fh, vdev); + + file->private_data = &fh->fh; + fh->dev = dev; + + if (vdev->vfl_type == VFL_TYPE_VBI) { + DEB_S("initializing vbi...\n"); + if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) + result = saa7146_vbi_uops.open(dev,file); + if (dev->ext_vv_data->vbi_fops.open) + dev->ext_vv_data->vbi_fops.open(file); + } else { + DEB_S("initializing video...\n"); + result = saa7146_video_uops.open(dev,file); + } + + if (0 != result) { + goto out; + } + + if( 0 == try_module_get(dev->ext->module)) { + result = -EINVAL; + goto out; + } + + result = 0; + v4l2_fh_add(&fh->fh); +out: + if (fh && result != 0) { + kfree(fh); + file->private_data = NULL; + } + mutex_unlock(vdev->lock); + return result; +} + +static int fops_release(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + + DEB_EE("file:%p\n", file); + + mutex_lock(vdev->lock); + + if (vdev->vfl_type == VFL_TYPE_VBI) { + if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) + saa7146_vbi_uops.release(dev,file); + if (dev->ext_vv_data->vbi_fops.release) + dev->ext_vv_data->vbi_fops.release(file); + } else { + saa7146_video_uops.release(dev,file); + } + + v4l2_fh_del(&fh->fh); + v4l2_fh_exit(&fh->fh); + module_put(dev->ext->module); + file->private_data = NULL; + kfree(fh); + + mutex_unlock(vdev->lock); + + return 0; +} + +static int fops_mmap(struct file *file, struct vm_area_struct * vma) +{ + struct video_device *vdev = video_devdata(file); + struct saa7146_fh *fh = file->private_data; + struct videobuf_queue *q; + int res; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: { + DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, vma:%p\n", + file, vma); + q = &fh->video_q; + break; + } + case VFL_TYPE_VBI: { + DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, vma:%p\n", + file, vma); + if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT) + return -ENODEV; + q = &fh->vbi_q; + break; + } + default: + BUG(); + return 0; + } + + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + res = videobuf_mmap_mapper(q, vma); + mutex_unlock(vdev->lock); + return res; +} + +static unsigned int __fops_poll(struct file *file, struct poll_table_struct *wait) +{ + struct video_device *vdev = video_devdata(file); + struct saa7146_fh *fh = file->private_data; + struct videobuf_buffer *buf = NULL; + struct videobuf_queue *q; + unsigned int res = v4l2_ctrl_poll(file, wait); + + DEB_EE("file:%p, poll:%p\n", file, wait); + + if (vdev->vfl_type == VFL_TYPE_VBI) { + if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT) + return res | POLLOUT | POLLWRNORM; + if( 0 == fh->vbi_q.streaming ) + return res | videobuf_poll_stream(file, &fh->vbi_q, wait); + q = &fh->vbi_q; + } else { + DEB_D("using video queue\n"); + q = &fh->video_q; + } + + if (!list_empty(&q->stream)) + buf = list_entry(q->stream.next, struct videobuf_buffer, stream); + + if (!buf) { + DEB_D("buf == NULL!\n"); + return res | POLLERR; + } + + poll_wait(file, &buf->done, wait); + if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) { + DEB_D("poll succeeded!\n"); + return res | POLLIN | POLLRDNORM; + } + + DEB_D("nothing to poll for, buf->state:%d\n", buf->state); + return res; +} + +static unsigned int fops_poll(struct file *file, struct poll_table_struct *wait) +{ + struct video_device *vdev = video_devdata(file); + unsigned int res; + + mutex_lock(vdev->lock); + res = __fops_poll(file, wait); + mutex_unlock(vdev->lock); + return res; +} + +static ssize_t fops_read(struct file *file, char __user *data, size_t count, loff_t *ppos) +{ + struct video_device *vdev = video_devdata(file); + struct saa7146_fh *fh = file->private_data; + int ret; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: +/* + DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun", + file, data, (unsigned long)count); +*/ + return saa7146_video_uops.read(file,data,count,ppos); + case VFL_TYPE_VBI: +/* + DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n", + file, data, (unsigned long)count); +*/ + if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) { + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + ret = saa7146_vbi_uops.read(file, data, count, ppos); + mutex_unlock(vdev->lock); + return ret; + } + return -EINVAL; + default: + BUG(); + return 0; + } +} + +static ssize_t fops_write(struct file *file, const char __user *data, size_t count, loff_t *ppos) +{ + struct video_device *vdev = video_devdata(file); + struct saa7146_fh *fh = file->private_data; + int ret; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + return -EINVAL; + case VFL_TYPE_VBI: + if (fh->dev->ext_vv_data->vbi_fops.write) { + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + ret = fh->dev->ext_vv_data->vbi_fops.write(file, data, count, ppos); + mutex_unlock(vdev->lock); + return ret; + } + return -EINVAL; + default: + BUG(); + return -EINVAL; + } +} + +static const struct v4l2_file_operations video_fops = +{ + .owner = THIS_MODULE, + .open = fops_open, + .release = fops_release, + .read = fops_read, + .write = fops_write, + .poll = fops_poll, + .mmap = fops_mmap, + .unlocked_ioctl = video_ioctl2, +}; + +static void vv_callback(struct saa7146_dev *dev, unsigned long status) +{ + u32 isr = status; + + DEB_INT("dev:%p, isr:0x%08x\n", dev, (u32)status); + + if (0 != (isr & (MASK_27))) { + DEB_INT("irq: RPS0 (0x%08x)\n", isr); + saa7146_video_uops.irq_done(dev,isr); + } + + if (0 != (isr & (MASK_28))) { + u32 mc2 = saa7146_read(dev, MC2); + if( 0 != (mc2 & MASK_15)) { + DEB_INT("irq: RPS1 vbi workaround (0x%08x)\n", isr); + wake_up(&dev->vv_data->vbi_wq); + saa7146_write(dev,MC2, MASK_31); + return; + } + DEB_INT("irq: RPS1 (0x%08x)\n", isr); + saa7146_vbi_uops.irq_done(dev,isr); + } +} + +static const struct v4l2_ctrl_ops saa7146_ctrl_ops = { + .s_ctrl = saa7146_s_ctrl, +}; + +int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv) +{ + struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; + struct v4l2_pix_format *fmt; + struct v4l2_vbi_format *vbi; + struct saa7146_vv *vv; + int err; + + err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev); + if (err) + return err; + + v4l2_ctrl_handler_init(hdl, 6); + v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + if (hdl->error) { + err = hdl->error; + v4l2_ctrl_handler_free(hdl); + return err; + } + dev->v4l2_dev.ctrl_handler = hdl; + + vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL); + if (vv == NULL) { + ERR("out of memory. aborting.\n"); + v4l2_ctrl_handler_free(hdl); + return -ENOMEM; + } + ext_vv->vid_ops = saa7146_video_ioctl_ops; + ext_vv->vbi_ops = saa7146_vbi_ioctl_ops; + ext_vv->core_ops = &saa7146_video_ioctl_ops; + + DEB_EE("dev:%p\n", dev); + + /* set default values for video parts of the saa7146 */ + saa7146_write(dev, BCS_CTRL, 0x80400040); + + /* enable video-port pins */ + saa7146_write(dev, MC1, (MASK_10 | MASK_26)); + + /* save per-device extension data (one extension can + handle different devices that might need different + configuration data) */ + dev->ext_vv_data = ext_vv; + + vv->d_clipping.cpu_addr = pci_alloc_consistent(dev->pci, SAA7146_CLIPPING_MEM, &vv->d_clipping.dma_handle); + if( NULL == vv->d_clipping.cpu_addr ) { + ERR("out of memory. aborting.\n"); + kfree(vv); + v4l2_ctrl_handler_free(hdl); + return -1; + } + memset(vv->d_clipping.cpu_addr, 0x0, SAA7146_CLIPPING_MEM); + + saa7146_video_uops.init(dev,vv); + if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) + saa7146_vbi_uops.init(dev,vv); + + fmt = &vv->ov_fb.fmt; + fmt->width = vv->standard->h_max_out; + fmt->height = vv->standard->v_max_out; + fmt->pixelformat = V4L2_PIX_FMT_RGB565; + fmt->bytesperline = 2 * fmt->width; + fmt->sizeimage = fmt->bytesperline * fmt->height; + fmt->colorspace = V4L2_COLORSPACE_SRGB; + + fmt = &vv->video_fmt; + fmt->width = 384; + fmt->height = 288; + fmt->pixelformat = V4L2_PIX_FMT_BGR24; + fmt->field = V4L2_FIELD_ANY; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + fmt->bytesperline = 3 * fmt->width; + fmt->sizeimage = fmt->bytesperline * fmt->height; + + vbi = &vv->vbi_fmt; + vbi->sampling_rate = 27000000; + vbi->offset = 248; /* todo */ + vbi->samples_per_line = 720 * 2; + vbi->sample_format = V4L2_PIX_FMT_GREY; + + /* fixme: this only works for PAL */ + vbi->start[0] = 5; + vbi->count[0] = 16; + vbi->start[1] = 312; + vbi->count[1] = 16; + + init_timer(&vv->vbi_read_timeout); + + vv->ov_fb.capability = V4L2_FBUF_CAP_LIST_CLIPPING; + vv->ov_fb.flags = V4L2_FBUF_FLAG_PRIMARY; + dev->vv_data = vv; + dev->vv_callback = &vv_callback; + + return 0; +} +EXPORT_SYMBOL_GPL(saa7146_vv_init); + +int saa7146_vv_release(struct saa7146_dev* dev) +{ + struct saa7146_vv *vv = dev->vv_data; + + DEB_EE("dev:%p\n", dev); + + v4l2_device_unregister(&dev->v4l2_dev); + pci_free_consistent(dev->pci, SAA7146_CLIPPING_MEM, vv->d_clipping.cpu_addr, vv->d_clipping.dma_handle); + v4l2_ctrl_handler_free(&dev->ctrl_handler); + kfree(vv); + dev->vv_data = NULL; + dev->vv_callback = NULL; + + return 0; +} +EXPORT_SYMBOL_GPL(saa7146_vv_release); + +int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, + char *name, int type) +{ + struct video_device *vfd; + int err; + int i; + + DEB_EE("dev:%p, name:'%s', type:%d\n", dev, name, type); + + // released by vfd->release + vfd = video_device_alloc(); + if (vfd == NULL) + return -ENOMEM; + + vfd->fops = &video_fops; + if (type == VFL_TYPE_GRABBER) + vfd->ioctl_ops = &dev->ext_vv_data->vid_ops; + else + vfd->ioctl_ops = &dev->ext_vv_data->vbi_ops; + vfd->release = video_device_release; + vfd->lock = &dev->v4l2_lock; + vfd->v4l2_dev = &dev->v4l2_dev; + vfd->tvnorms = 0; + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + for (i = 0; i < dev->ext_vv_data->num_stds; i++) + vfd->tvnorms |= dev->ext_vv_data->stds[i].id; + strlcpy(vfd->name, name, sizeof(vfd->name)); + video_set_drvdata(vfd, dev); + + err = video_register_device(vfd, type, -1); + if (err < 0) { + ERR("cannot register v4l2 device. skipping.\n"); + video_device_release(vfd); + return err; + } + + pr_info("%s: registered device %s [v4l2]\n", + dev->name, video_device_node_name(vfd)); + + *vid = vfd; + return 0; +} +EXPORT_SYMBOL_GPL(saa7146_register_device); + +int saa7146_unregister_device(struct video_device **vid, struct saa7146_dev* dev) +{ + DEB_EE("dev:%p\n", dev); + + video_unregister_device(*vid); + *vid = NULL; + + return 0; +} +EXPORT_SYMBOL_GPL(saa7146_unregister_device); + +static int __init saa7146_vv_init_module(void) +{ + return 0; +} + + +static void __exit saa7146_vv_cleanup_module(void) +{ +} + +module_init(saa7146_vv_init_module); +module_exit(saa7146_vv_cleanup_module); + +MODULE_AUTHOR("Michael Hunold "); +MODULE_DESCRIPTION("video4linux driver for saa7146-based hardware"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/saa7146/saa7146_hlp.c b/drivers/media/common/saa7146/saa7146_hlp.c new file mode 100644 index 00000000..be746d1a --- /dev/null +++ b/drivers/media/common/saa7146/saa7146_hlp.c @@ -0,0 +1,1048 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include + +static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format) +{ + /* clear out the necessary bits */ + *clip_format &= 0x0000ffff; + /* set these bits new */ + *clip_format |= (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16)); +} + +static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl) +{ + *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28); + *hps_ctrl |= (source << 30) | (sync << 28); +} + +static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl) +{ + int hyo = 0, hxo = 0; + + hyo = vv->standard->v_offset; + hxo = vv->standard->h_offset; + + *hps_h_scale &= ~(MASK_B0 | 0xf00); + *hps_h_scale |= (hxo << 0); + + *hps_ctrl &= ~(MASK_W0 | MASK_B2); + *hps_ctrl |= (hyo << 12); +} + +/* helper functions for the calculation of the horizontal- and vertical + scaling registers, clip-format-register etc ... + these functions take pointers to the (most-likely read-out + original-values) and manipulate them according to the requested + changes. +*/ + +/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */ +static struct { + u16 hps_coeff; + u16 weight_sum; +} hps_h_coeff_tab [] = { + {0x00, 2}, {0x02, 4}, {0x00, 4}, {0x06, 8}, {0x02, 8}, + {0x08, 8}, {0x00, 8}, {0x1E, 16}, {0x0E, 8}, {0x26, 8}, + {0x06, 8}, {0x42, 8}, {0x02, 8}, {0x80, 8}, {0x00, 8}, + {0xFE, 16}, {0xFE, 8}, {0x7E, 8}, {0x7E, 8}, {0x3E, 8}, + {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, {0x0E, 8}, {0x0E, 8}, + {0x06, 8}, {0x06, 8}, {0x02, 8}, {0x02, 8}, {0x00, 8}, + {0x00, 8}, {0xFE, 16}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, + {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, + {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, + {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0x7E, 8}, + {0x7E, 8}, {0x3E, 8}, {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, + {0x0E, 8}, {0x0E, 8}, {0x06, 8}, {0x06, 8}, {0x02, 8}, + {0x02, 8}, {0x00, 8}, {0x00, 8}, {0xFE, 16} +}; + +/* table of attenuation values for horizontal scaling */ +static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0}; + +/* calculate horizontal scale registers */ +static int calculate_h_scale_registers(struct saa7146_dev *dev, + int in_x, int out_x, int flip_lr, + u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale) +{ + /* horizontal prescaler */ + u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0; + /* horizontal scaler */ + u32 xim = 0, xp = 0, xsci =0; + /* vertical scale & gain */ + u32 pfuv = 0; + + /* helper variables */ + u32 h_atten = 0, i = 0; + + if ( 0 == out_x ) { + return -EINVAL; + } + + /* mask out vanity-bit */ + *hps_ctrl &= ~MASK_29; + + /* calculate prescale-(xspc)-value: [n .. 1/2) : 1 + [1/2 .. 1/3) : 2 + [1/3 .. 1/4) : 3 + ... */ + if (in_x > out_x) { + xpsc = in_x / out_x; + } + else { + /* zooming */ + xpsc = 1; + } + + /* if flip_lr-bit is set, number of pixels after + horizontal prescaling must be < 384 */ + if ( 0 != flip_lr ) { + + /* set vanity bit */ + *hps_ctrl |= MASK_29; + + while (in_x / xpsc >= 384 ) + xpsc++; + } + /* if zooming is wanted, number of pixels after + horizontal prescaling must be < 768 */ + else { + while ( in_x / xpsc >= 768 ) + xpsc++; + } + + /* maximum prescale is 64 (p.69) */ + if ( xpsc > 64 ) + xpsc = 64; + + /* keep xacm clear*/ + xacm = 0; + + /* set horizontal filter parameters (CXY = CXUV) */ + cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff; + cxuv = cxy; + + /* calculate and set horizontal fine scale (xsci) */ + + /* bypass the horizontal scaler ? */ + if ( (in_x == out_x) && ( 1 == xpsc ) ) + xsci = 0x400; + else + xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc; + + /* set start phase for horizontal fine scale (xp) to 0 */ + xp = 0; + + /* set xim, if we bypass the horizontal scaler */ + if ( 0x400 == xsci ) + xim = 1; + else + xim = 0; + + /* if the prescaler is bypassed, enable horizontal + accumulation mode (xacm) and clear dcgx */ + if( 1 == xpsc ) { + xacm = 1; + dcgx = 0; + } else { + xacm = 0; + /* get best match in the table of attenuations + for horizontal scaling */ + h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum; + + for (i = 0; h_attenuation[i] != 0; i++) { + if (h_attenuation[i] >= h_atten) + break; + } + + dcgx = i; + } + + /* the horizontal scaling increment controls the UV filter + to reduce the bandwidth to improve the display quality, + so set it ... */ + if ( xsci == 0x400) + pfuv = 0x00; + else if ( xsci < 0x600) + pfuv = 0x01; + else if ( xsci < 0x680) + pfuv = 0x11; + else if ( xsci < 0x700) + pfuv = 0x22; + else + pfuv = 0x33; + + + *hps_v_gain &= MASK_W0|MASK_B2; + *hps_v_gain |= (pfuv << 24); + + *hps_h_scale &= ~(MASK_W1 | 0xf000); + *hps_h_scale |= (xim << 31) | (xp << 24) | (xsci << 12); + + *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0); + + return 0; +} + +static struct { + u16 hps_coeff; + u16 weight_sum; +} hps_v_coeff_tab [] = { + {0x0100, 2}, {0x0102, 4}, {0x0300, 4}, {0x0106, 8}, {0x0502, 8}, + {0x0708, 8}, {0x0F00, 8}, {0x011E, 16}, {0x110E, 16}, {0x1926, 16}, + {0x3906, 16}, {0x3D42, 16}, {0x7D02, 16}, {0x7F80, 16}, {0xFF00, 16}, + {0x01FE, 32}, {0x01FE, 32}, {0x817E, 32}, {0x817E, 32}, {0xC13E, 32}, + {0xC13E, 32}, {0xE11E, 32}, {0xE11E, 32}, {0xF10E, 32}, {0xF10E, 32}, + {0xF906, 32}, {0xF906, 32}, {0xFD02, 32}, {0xFD02, 32}, {0xFF00, 32}, + {0xFF00, 32}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, + {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, + {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, + {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x817E, 64}, + {0x817E, 64}, {0xC13E, 64}, {0xC13E, 64}, {0xE11E, 64}, {0xE11E, 64}, + {0xF10E, 64}, {0xF10E, 64}, {0xF906, 64}, {0xF906, 64}, {0xFD02, 64}, + {0xFD02, 64}, {0xFF00, 64}, {0xFF00, 64}, {0x01FE, 128} +}; + +/* table of attenuation values for vertical scaling */ +static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0}; + +/* calculate vertical scale registers */ +static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field, + int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain) +{ + int lpi = 0; + + /* vertical scaling */ + u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0; + /* vertical scale & gain */ + u32 dcgy = 0, cya_cyb = 0; + + /* helper variables */ + u32 v_atten = 0, i = 0; + + /* error, if vertical zooming */ + if ( in_y < out_y ) { + return -EINVAL; + } + + /* linear phase interpolation may be used + if scaling is between 1 and 1/2 (both fields used) + or scaling is between 1/2 and 1/4 (if only one field is used) */ + + if (V4L2_FIELD_HAS_BOTH(field)) { + if( 2*out_y >= in_y) { + lpi = 1; + } + } else if (field == V4L2_FIELD_TOP + || field == V4L2_FIELD_ALTERNATE + || field == V4L2_FIELD_BOTTOM) { + if( 4*out_y >= in_y ) { + lpi = 1; + } + out_y *= 2; + } + if( 0 != lpi ) { + + yacm = 0; + yacl = 0; + cya_cyb = 0x00ff; + + /* calculate scaling increment */ + if ( in_y > out_y ) + ysci = ((1024 * in_y) / (out_y + 1)) - 1024; + else + ysci = 0; + + dcgy = 0; + + /* calculate ype and ypo */ + ype = ysci / 16; + ypo = ype + (ysci / 64); + + } else { + yacm = 1; + + /* calculate scaling increment */ + ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10; + + /* calculate ype and ypo */ + ypo = ype = ((ysci + 15) / 16); + + /* the sequence length interval (yacl) has to be set according + to the prescale value, e.g. [n .. 1/2) : 0 + [1/2 .. 1/3) : 1 + [1/3 .. 1/4) : 2 + ... */ + if ( ysci < 512) { + yacl = 0; + } else { + yacl = ( ysci / (1024 - ysci) ); + } + + /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */ + cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff; + + /* get best match in the table of attenuations for vertical scaling */ + v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum; + + for (i = 0; v_attenuation[i] != 0; i++) { + if (v_attenuation[i] >= v_atten) + break; + } + + dcgy = i; + } + + /* ypo and ype swapped in spec ? */ + *hps_v_scale |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1); + + *hps_v_gain &= ~(MASK_W0|MASK_B2); + *hps_v_gain |= (dcgy << 16) | (cya_cyb << 0); + + return 0; +} + +/* simple bubble-sort algorithm with duplicate elimination */ +static int sort_and_eliminate(u32* values, int* count) +{ + int low = 0, high = 0, top = 0, temp = 0; + int cur = 0, next = 0; + + /* sanity checks */ + if( (0 > *count) || (NULL == values) ) { + return -EINVAL; + } + + /* bubble sort the first @count items of the array @values */ + for( top = *count; top > 0; top--) { + for( low = 0, high = 1; high < top; low++, high++) { + if( values[low] > values[high] ) { + temp = values[low]; + values[low] = values[high]; + values[high] = temp; + } + } + } + + /* remove duplicate items */ + for( cur = 0, next = 1; next < *count; next++) { + if( values[cur] != values[next]) + values[++cur] = values[next]; + } + + *count = cur + 1; + + return 0; +} + +static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh, + struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field) +{ + struct saa7146_vv *vv = dev->vv_data; + __le32 *clipping = vv->d_clipping.cpu_addr; + + int width = vv->ov.win.w.width; + int height = vv->ov.win.w.height; + int clipcount = vv->ov.nclips; + + u32 line_list[32]; + u32 pixel_list[32]; + int numdwords = 0; + + int i = 0, j = 0; + int cnt_line = 0, cnt_pixel = 0; + + int x[32], y[32], w[32], h[32]; + + /* clear out memory */ + memset(&line_list[0], 0x00, sizeof(u32)*32); + memset(&pixel_list[0], 0x00, sizeof(u32)*32); + memset(clipping, 0x00, SAA7146_CLIPPING_MEM); + + /* fill the line and pixel-lists */ + for(i = 0; i < clipcount; i++) { + int l = 0, r = 0, t = 0, b = 0; + + x[i] = vv->ov.clips[i].c.left; + y[i] = vv->ov.clips[i].c.top; + w[i] = vv->ov.clips[i].c.width; + h[i] = vv->ov.clips[i].c.height; + + if( w[i] < 0) { + x[i] += w[i]; w[i] = -w[i]; + } + if( h[i] < 0) { + y[i] += h[i]; h[i] = -h[i]; + } + if( x[i] < 0) { + w[i] += x[i]; x[i] = 0; + } + if( y[i] < 0) { + h[i] += y[i]; y[i] = 0; + } + if( 0 != vv->vflip ) { + y[i] = height - y[i] - h[i]; + } + + l = x[i]; + r = x[i]+w[i]; + t = y[i]; + b = y[i]+h[i]; + + /* insert left/right coordinates */ + pixel_list[ 2*i ] = min_t(int, l, width); + pixel_list[(2*i)+1] = min_t(int, r, width); + /* insert top/bottom coordinates */ + line_list[ 2*i ] = min_t(int, t, height); + line_list[(2*i)+1] = min_t(int, b, height); + } + + /* sort and eliminate lists */ + cnt_line = cnt_pixel = 2*clipcount; + sort_and_eliminate( &pixel_list[0], &cnt_pixel ); + sort_and_eliminate( &line_list[0], &cnt_line ); + + /* calculate the number of used u32s */ + numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2; + numdwords = max_t(int, 4, numdwords); + numdwords = min_t(int, 64, numdwords); + + /* fill up cliptable */ + for(i = 0; i < cnt_pixel; i++) { + clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16); + } + for(i = 0; i < cnt_line; i++) { + clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16); + } + + /* fill up cliptable with the display infos */ + for(j = 0; j < clipcount; j++) { + + for(i = 0; i < cnt_pixel; i++) { + + if( x[j] < 0) + x[j] = 0; + + if( pixel_list[i] < (x[j] + w[j])) { + + if ( pixel_list[i] >= x[j] ) { + clipping[2*i] |= cpu_to_le32(1 << j); + } + } + } + for(i = 0; i < cnt_line; i++) { + + if( y[j] < 0) + y[j] = 0; + + if( line_list[i] < (y[j] + h[j]) ) { + + if( line_list[i] >= y[j] ) { + clipping[(2*i)+1] |= cpu_to_le32(1 << j); + } + } + } + } + + /* adjust arbitration control register */ + *arbtr_ctrl &= 0xffff00ff; + *arbtr_ctrl |= 0x00001c00; + + vdma2->base_even = vv->d_clipping.dma_handle; + vdma2->base_odd = vv->d_clipping.dma_handle; + vdma2->prot_addr = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords)); + vdma2->base_page = 0x04; + vdma2->pitch = 0x00; + vdma2->num_line_byte = (0 << 16 | (sizeof(u32))*(numdwords-1) ); + + /* set clipping-mode. this depends on the field(s) used */ + *clip_format &= 0xfffffff7; + if (V4L2_FIELD_HAS_BOTH(field)) { + *clip_format |= 0x00000008; + } else { + *clip_format |= 0x00000000; + } +} + +/* disable clipping */ +static void saa7146_disable_clipping(struct saa7146_dev *dev) +{ + u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); + + /* mask out relevant bits (=lower word)*/ + clip_format &= MASK_W1; + + /* upload clipping-registers*/ + saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format); + saa7146_write(dev, MC2, (MASK_05 | MASK_21)); + + /* disable video dma2 */ + saa7146_write(dev, MC1, MASK_21); +} + +static void saa7146_set_clipping_rect(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + enum v4l2_field field = vv->ov.win.field; + struct saa7146_video_dma vdma2; + u32 clip_format; + u32 arbtr_ctrl; + + /* check clipcount, disable clipping if clipcount == 0*/ + if (vv->ov.nclips == 0) { + saa7146_disable_clipping(dev); + return; + } + + clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); + arbtr_ctrl = saa7146_read(dev, PCI_BT_V1); + + calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field); + + /* set clipping format */ + clip_format &= 0xffff0008; + clip_format |= (SAA7146_CLIPPING_RECT << 4); + + /* prepare video dma2 */ + saa7146_write(dev, BASE_EVEN2, vdma2.base_even); + saa7146_write(dev, BASE_ODD2, vdma2.base_odd); + saa7146_write(dev, PROT_ADDR2, vdma2.prot_addr); + saa7146_write(dev, BASE_PAGE2, vdma2.base_page); + saa7146_write(dev, PITCH2, vdma2.pitch); + saa7146_write(dev, NUM_LINE_BYTE2, vdma2.num_line_byte); + + /* prepare the rest */ + saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format); + saa7146_write(dev, PCI_BT_V1, arbtr_ctrl); + + /* upload clip_control-register, clipping-registers, enable video dma2 */ + saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19)); + saa7146_write(dev, MC1, (MASK_05 | MASK_21)); +} + +static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field) +{ + struct saa7146_vv *vv = dev->vv_data; + + int source = vv->current_hps_source; + int sync = vv->current_hps_sync; + + u32 hps_v_scale = 0, hps_v_gain = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0; + + /* set vertical scale */ + hps_v_scale = 0; /* all bits get set by the function-call */ + hps_v_gain = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/ + calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain); + + /* set horizontal scale */ + hps_ctrl = 0; + hps_h_prescale = 0; /* all bits get set in the function */ + hps_h_scale = 0; + calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale); + + /* set hyo and hxo */ + calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl); + calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl); + + /* write out new register contents */ + saa7146_write(dev, HPS_V_SCALE, hps_v_scale); + saa7146_write(dev, HPS_V_GAIN, hps_v_gain); + saa7146_write(dev, HPS_CTRL, hps_ctrl); + saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale); + saa7146_write(dev, HPS_H_SCALE, hps_h_scale); + + /* upload shadow-ram registers */ + saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) ); +} + +/* calculate the new memory offsets for a desired position */ +static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat) +{ + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat); + + int b_depth = vv->ov_fmt->depth; + int b_bpl = vv->ov_fb.fmt.bytesperline; + /* The unsigned long cast is to remove a 64-bit compile warning since + it looks like a 64-bit address is cast to a 32-bit value, even + though the base pointer is really a 32-bit physical address that + goes into a 32-bit DMA register. + FIXME: might not work on some 64-bit platforms, but see the FIXME + in struct v4l2_framebuffer (videodev2.h) for that. + */ + u32 base = (u32)(unsigned long)vv->ov_fb.base; + + struct saa7146_video_dma vdma1; + + /* calculate memory offsets for picture, look if we shall top-down-flip */ + vdma1.pitch = 2*b_bpl; + if ( 0 == vv->vflip ) { + vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8)); + vdma1.base_odd = vdma1.base_even + (vdma1.pitch / 2); + vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2)); + } + else { + vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8)); + vdma1.base_odd = vdma1.base_even - (vdma1.pitch / 2); + vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2)); + } + + if (V4L2_FIELD_HAS_BOTH(field)) { + } else if (field == V4L2_FIELD_ALTERNATE) { + /* fixme */ + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + } else if (field == V4L2_FIELD_TOP) { + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + } else if (field == V4L2_FIELD_BOTTOM) { + vdma1.base_odd = vdma1.base_even; + vdma1.base_even = vdma1.prot_addr; + vdma1.pitch /= 2; + } + + if ( 0 != vv->vflip ) { + vdma1.pitch *= -1; + } + + vdma1.base_page = sfmt->swap; + vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels; + + saa7146_write_out_dma(dev, 1, &vdma1); +} + +static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette) +{ + u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); + + /* call helper function */ + calculate_output_format_register(dev,palette,&clip_format); + + /* update the hps registers */ + saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format); + saa7146_write(dev, MC2, (MASK_05 | MASK_21)); +} + +/* select input-source */ +void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync) +{ + struct saa7146_vv *vv = dev->vv_data; + u32 hps_ctrl = 0; + + /* read old state */ + hps_ctrl = saa7146_read(dev, HPS_CTRL); + + hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 ); + hps_ctrl |= (source << 30) | (sync << 28); + + /* write back & upload register */ + saa7146_write(dev, HPS_CTRL, hps_ctrl); + saa7146_write(dev, MC2, (MASK_05 | MASK_21)); + + vv->current_hps_source = source; + vv->current_hps_sync = sync; +} +EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync); + +int saa7146_enable_overlay(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + + saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field); + saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat); + saa7146_set_output_format(dev, vv->ov_fmt->trans); + saa7146_set_clipping_rect(fh); + + /* enable video dma1 */ + saa7146_write(dev, MC1, (MASK_06 | MASK_22)); + return 0; +} + +void saa7146_disable_overlay(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + + /* disable clipping + video dma1 */ + saa7146_disable_clipping(dev); + saa7146_write(dev, MC1, MASK_22); +} + +void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) +{ + int where = 0; + + if( which < 1 || which > 3) { + return; + } + + /* calculate starting address */ + where = (which-1)*0x18; + + saa7146_write(dev, where, vdma->base_odd); + saa7146_write(dev, where+0x04, vdma->base_even); + saa7146_write(dev, where+0x08, vdma->prot_addr); + saa7146_write(dev, where+0x0c, vdma->pitch); + saa7146_write(dev, where+0x10, vdma->base_page); + saa7146_write(dev, where+0x14, vdma->num_line_byte); + + /* upload */ + saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1))); +/* + printk("vdma%d.base_even: 0x%08x\n", which,vdma->base_even); + printk("vdma%d.base_odd: 0x%08x\n", which,vdma->base_odd); + printk("vdma%d.prot_addr: 0x%08x\n", which,vdma->prot_addr); + printk("vdma%d.base_page: 0x%08x\n", which,vdma->base_page); + printk("vdma%d.pitch: 0x%08x\n", which,vdma->pitch); + printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte); +*/ +} + +static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf) +{ + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_video_dma vdma1; + + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); + + int width = buf->fmt->width; + int height = buf->fmt->height; + int bytesperline = buf->fmt->bytesperline; + enum v4l2_field field = buf->fmt->field; + + int depth = sfmt->depth; + + DEB_CAP("[size=%dx%d,fields=%s]\n", + width, height, v4l2_field_names[field]); + + if( bytesperline != 0) { + vdma1.pitch = bytesperline*2; + } else { + vdma1.pitch = (width*depth*2)/8; + } + vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels); + vdma1.base_page = buf->pt[0].dma | ME1 | sfmt->swap; + + if( 0 != vv->vflip ) { + vdma1.prot_addr = buf->pt[0].offset; + vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height; + vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2); + } else { + vdma1.base_even = buf->pt[0].offset; + vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2); + vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height; + } + + if (V4L2_FIELD_HAS_BOTH(field)) { + } else if (field == V4L2_FIELD_ALTERNATE) { + /* fixme */ + if ( vv->last_field == V4L2_FIELD_TOP ) { + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { + vdma1.base_odd = vdma1.base_even; + vdma1.base_even = vdma1.prot_addr; + vdma1.pitch /= 2; + } + } else if (field == V4L2_FIELD_TOP) { + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + } else if (field == V4L2_FIELD_BOTTOM) { + vdma1.base_odd = vdma1.base_even; + vdma1.base_even = vdma1.prot_addr; + vdma1.pitch /= 2; + } + + if( 0 != vv->vflip ) { + vdma1.pitch *= -1; + } + + saa7146_write_out_dma(dev, 1, &vdma1); + return 0; +} + +static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3) +{ + int height = buf->fmt->height; + int width = buf->fmt->width; + + vdma2->pitch = width; + vdma3->pitch = width; + + /* fixme: look at bytesperline! */ + + if( 0 != vv->vflip ) { + vdma2->prot_addr = buf->pt[1].offset; + vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[1].offset; + vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2); + + vdma3->prot_addr = buf->pt[2].offset; + vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[2].offset; + vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2); + } else { + vdma3->base_even = buf->pt[2].offset; + vdma3->base_odd = vdma3->base_even + (vdma3->pitch/2); + vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset; + + vdma2->base_even = buf->pt[1].offset; + vdma2->base_odd = vdma2->base_even + (vdma2->pitch/2); + vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset; + } + + return 0; +} + +static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3) +{ + int height = buf->fmt->height; + int width = buf->fmt->width; + + vdma2->pitch = width/2; + vdma3->pitch = width/2; + + if( 0 != vv->vflip ) { + vdma2->prot_addr = buf->pt[2].offset; + vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[2].offset; + vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2); + + vdma3->prot_addr = buf->pt[1].offset; + vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[1].offset; + vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2); + + } else { + vdma3->base_even = buf->pt[2].offset; + vdma3->base_odd = vdma3->base_even + (vdma3->pitch); + vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset; + + vdma2->base_even = buf->pt[1].offset; + vdma2->base_odd = vdma2->base_even + (vdma2->pitch); + vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset; + } + return 0; +} + +static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf) +{ + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_video_dma vdma1; + struct saa7146_video_dma vdma2; + struct saa7146_video_dma vdma3; + + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); + + int width = buf->fmt->width; + int height = buf->fmt->height; + enum v4l2_field field = buf->fmt->field; + + BUG_ON(0 == buf->pt[0].dma); + BUG_ON(0 == buf->pt[1].dma); + BUG_ON(0 == buf->pt[2].dma); + + DEB_CAP("[size=%dx%d,fields=%s]\n", + width, height, v4l2_field_names[field]); + + /* fixme: look at bytesperline! */ + + /* fixme: what happens for user space buffers here?. The offsets are + most likely wrong, this version here only works for page-aligned + buffers, modifications to the pagetable-functions are necessary...*/ + + vdma1.pitch = width*2; + vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels); + vdma1.base_page = buf->pt[0].dma | ME1; + + if( 0 != vv->vflip ) { + vdma1.prot_addr = buf->pt[0].offset; + vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset; + vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2); + } else { + vdma1.base_even = buf->pt[0].offset; + vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2); + vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset; + } + + vdma2.num_line_byte = 0; /* unused */ + vdma2.base_page = buf->pt[1].dma | ME1; + + vdma3.num_line_byte = 0; /* unused */ + vdma3.base_page = buf->pt[2].dma | ME1; + + switch( sfmt->depth ) { + case 12: { + calc_planar_420(vv,buf,&vdma2,&vdma3); + break; + } + case 16: { + calc_planar_422(vv,buf,&vdma2,&vdma3); + break; + } + default: { + return -1; + } + } + + if (V4L2_FIELD_HAS_BOTH(field)) { + } else if (field == V4L2_FIELD_ALTERNATE) { + /* fixme */ + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + vdma2.base_odd = vdma2.prot_addr; + vdma2.pitch /= 2; + vdma3.base_odd = vdma3.prot_addr; + vdma3.pitch /= 2; + } else if (field == V4L2_FIELD_TOP) { + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + vdma2.base_odd = vdma2.prot_addr; + vdma2.pitch /= 2; + vdma3.base_odd = vdma3.prot_addr; + vdma3.pitch /= 2; + } else if (field == V4L2_FIELD_BOTTOM) { + vdma1.base_odd = vdma1.base_even; + vdma1.base_even = vdma1.prot_addr; + vdma1.pitch /= 2; + vdma2.base_odd = vdma2.base_even; + vdma2.base_even = vdma2.prot_addr; + vdma2.pitch /= 2; + vdma3.base_odd = vdma3.base_even; + vdma3.base_even = vdma3.prot_addr; + vdma3.pitch /= 2; + } + + if( 0 != vv->vflip ) { + vdma1.pitch *= -1; + vdma2.pitch *= -1; + vdma3.pitch *= -1; + } + + saa7146_write_out_dma(dev, 1, &vdma1); + if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) { + saa7146_write_out_dma(dev, 3, &vdma2); + saa7146_write_out_dma(dev, 2, &vdma3); + } else { + saa7146_write_out_dma(dev, 2, &vdma2); + saa7146_write_out_dma(dev, 3, &vdma3); + } + return 0; +} + +static void program_capture_engine(struct saa7146_dev *dev, int planar) +{ + struct saa7146_vv *vv = dev->vv_data; + int count = 0; + + unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B; + unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B; + + /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/ + WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait); + WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait); + + /* set rps register 0 */ + WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4)); + WRITE_RPS0(MASK_27 | MASK_11); + + /* turn on video-dma1 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_06 | MASK_22); /* => mask */ + WRITE_RPS0(MASK_06 | MASK_22); /* => values */ + if( 0 != planar ) { + /* turn on video-dma2 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_05 | MASK_21); /* => mask */ + WRITE_RPS0(MASK_05 | MASK_21); /* => values */ + + /* turn on video-dma3 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_04 | MASK_20); /* => mask */ + WRITE_RPS0(MASK_04 | MASK_20); /* => values */ + } + + /* wait for o_fid_a/b / e_fid_a/b toggle */ + if ( vv->last_field == V4L2_FIELD_INTERLACED ) { + WRITE_RPS0(CMD_PAUSE | o_wait); + WRITE_RPS0(CMD_PAUSE | e_wait); + } else if ( vv->last_field == V4L2_FIELD_TOP ) { + WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09)); + WRITE_RPS0(CMD_PAUSE | o_wait); + } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { + WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09)); + WRITE_RPS0(CMD_PAUSE | e_wait); + } + + /* turn off video-dma1 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_22 | MASK_06); /* => mask */ + WRITE_RPS0(MASK_22); /* => values */ + if( 0 != planar ) { + /* turn off video-dma2 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_05 | MASK_21); /* => mask */ + WRITE_RPS0(MASK_21); /* => values */ + + /* turn off video-dma3 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_04 | MASK_20); /* => mask */ + WRITE_RPS0(MASK_20); /* => values */ + } + + /* generate interrupt */ + WRITE_RPS0(CMD_INTERRUPT); + + /* stop */ + WRITE_RPS0(CMD_STOP); +} + +void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next) +{ + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); + struct saa7146_vv *vv = dev->vv_data; + u32 vdma1_prot_addr; + + DEB_CAP("buf:%p, next:%p\n", buf, next); + + vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1); + if( 0 == vdma1_prot_addr ) { + /* clear out beginning of streaming bit (rps register 0)*/ + DEB_CAP("forcing sync to new frame\n"); + saa7146_write(dev, MC2, MASK_27 ); + } + + saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field); + saa7146_set_output_format(dev, sfmt->trans); + saa7146_disable_clipping(dev); + + if ( vv->last_field == V4L2_FIELD_INTERLACED ) { + } else if ( vv->last_field == V4L2_FIELD_TOP ) { + vv->last_field = V4L2_FIELD_BOTTOM; + } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { + vv->last_field = V4L2_FIELD_TOP; + } + + if( 0 != IS_PLANAR(sfmt->trans)) { + calculate_video_dma_grab_planar(dev, buf); + program_capture_engine(dev,1); + } else { + calculate_video_dma_grab_packed(dev, buf); + program_capture_engine(dev,0); + } + +/* + printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1)); + printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1)); + printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1)); + printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1)); + printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1)); + printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1)); + printk("vdma%d => vptr : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1)); +*/ + + /* write the address of the rps-program */ + saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle); + + /* turn on rps */ + saa7146_write(dev, MC1, (MASK_12 | MASK_28)); +} diff --git a/drivers/media/common/saa7146/saa7146_i2c.c b/drivers/media/common/saa7146/saa7146_i2c.c new file mode 100644 index 00000000..22027198 --- /dev/null +++ b/drivers/media/common/saa7146/saa7146_i2c.c @@ -0,0 +1,423 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include + +static u32 saa7146_i2c_func(struct i2c_adapter *adapter) +{ + /* DEB_I2C("'%s'\n", adapter->name); */ + + return I2C_FUNC_I2C + | I2C_FUNC_SMBUS_QUICK + | I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE + | I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA; +} + +/* this function returns the status-register of our i2c-device */ +static inline u32 saa7146_i2c_status(struct saa7146_dev *dev) +{ + u32 iicsta = saa7146_read(dev, I2C_STATUS); + /* DEB_I2C("status: 0x%08x\n", iicsta); */ + return iicsta; +} + +/* this function runs through the i2c-messages and prepares the data to be + sent through the saa7146. have a look at the specifications p. 122 ff + to understand this. it returns the number of u32s to send, or -1 + in case of an error. */ +static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, __le32 *op) +{ + int h1, h2; + int i, j, addr; + int mem = 0, op_count = 0; + + /* first determine size of needed memory */ + for(i = 0; i < num; i++) { + mem += m[i].len + 1; + } + + /* worst case: we need one u32 for three bytes to be send + plus one extra byte to address the device */ + mem = 1 + ((mem-1) / 3); + + /* we assume that op points to a memory of at least + * SAA7146_I2C_MEM bytes size. if we exceed this limit... + */ + if ((4 * mem) > SAA7146_I2C_MEM) { + /* DEB_I2C("cannot prepare i2c-message\n"); */ + return -ENOMEM; + } + + /* be careful: clear out the i2c-mem first */ + memset(op,0,sizeof(__le32)*mem); + + /* loop through all messages */ + for(i = 0; i < num; i++) { + + /* insert the address of the i2c-slave. + note: we get 7 bit i2c-addresses, + so we have to perform a translation */ + addr = (m[i].addr*2) + ( (0 != (m[i].flags & I2C_M_RD)) ? 1 : 0); + h1 = op_count/3; h2 = op_count%3; + op[h1] |= cpu_to_le32( (u8)addr << ((3-h2)*8)); + op[h1] |= cpu_to_le32(SAA7146_I2C_START << ((3-h2)*2)); + op_count++; + + /* loop through all bytes of message i */ + for(j = 0; j < m[i].len; j++) { + /* insert the data bytes */ + h1 = op_count/3; h2 = op_count%3; + op[h1] |= cpu_to_le32( (u32)((u8)m[i].buf[j]) << ((3-h2)*8)); + op[h1] |= cpu_to_le32( SAA7146_I2C_CONT << ((3-h2)*2)); + op_count++; + } + + } + + /* have a look at the last byte inserted: + if it was: ...CONT change it to ...STOP */ + h1 = (op_count-1)/3; h2 = (op_count-1)%3; + if ( SAA7146_I2C_CONT == (0x3 & (le32_to_cpu(op[h1]) >> ((3-h2)*2))) ) { + op[h1] &= ~cpu_to_le32(0x2 << ((3-h2)*2)); + op[h1] |= cpu_to_le32(SAA7146_I2C_STOP << ((3-h2)*2)); + } + + /* return the number of u32s to send */ + return mem; +} + +/* this functions loops through all i2c-messages. normally, it should determine + which bytes were read through the adapter and write them back to the corresponding + i2c-message. but instead, we simply write back all bytes. + fixme: this could be improved. */ +static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op) +{ + int i, j; + int op_count = 0; + + /* loop through all messages */ + for(i = 0; i < num; i++) { + + op_count++; + + /* loop through all bytes of message i */ + for(j = 0; j < m[i].len; j++) { + /* write back all bytes that could have been read */ + m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8)); + op_count++; + } + } + + return 0; +} + +/* this functions resets the i2c-device and returns 0 if everything was fine, otherwise -1 */ +static int saa7146_i2c_reset(struct saa7146_dev *dev) +{ + /* get current status */ + u32 status = saa7146_i2c_status(dev); + + /* clear registers for sure */ + saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); + saa7146_write(dev, I2C_TRANSFER, 0); + + /* check if any operation is still in progress */ + if ( 0 != ( status & SAA7146_I2C_BUSY) ) { + + /* yes, kill ongoing operation */ + DEB_I2C("busy_state detected\n"); + + /* set "ABORT-OPERATION"-bit (bit 7)*/ + saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07)); + saa7146_write(dev, MC2, (MASK_00 | MASK_16)); + msleep(SAA7146_I2C_DELAY); + + /* clear all error-bits pending; this is needed because p.123, note 1 */ + saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); + saa7146_write(dev, MC2, (MASK_00 | MASK_16)); + msleep(SAA7146_I2C_DELAY); + } + + /* check if any error is (still) present. (this can be necessary because p.123, note 1) */ + status = saa7146_i2c_status(dev); + + if ( dev->i2c_bitrate != status ) { + + DEB_I2C("error_state detected. status:0x%08x\n", status); + + /* Repeat the abort operation. This seems to be necessary + after serious protocol errors caused by e.g. the SAA7740 */ + saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07)); + saa7146_write(dev, MC2, (MASK_00 | MASK_16)); + msleep(SAA7146_I2C_DELAY); + + /* clear all error-bits pending */ + saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); + saa7146_write(dev, MC2, (MASK_00 | MASK_16)); + msleep(SAA7146_I2C_DELAY); + + /* the data sheet says it might be necessary to clear the status + twice after an abort */ + saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); + saa7146_write(dev, MC2, (MASK_00 | MASK_16)); + msleep(SAA7146_I2C_DELAY); + } + + /* if any error is still present, a fatal error has occurred ... */ + status = saa7146_i2c_status(dev); + if ( dev->i2c_bitrate != status ) { + DEB_I2C("fatal error. status:0x%08x\n", status); + return -1; + } + + return 0; +} + +/* this functions writes out the data-byte 'dword' to the i2c-device. + it returns 0 if ok, -1 if the transfer failed, -2 if the transfer + failed badly (e.g. address error) */ +static int saa7146_i2c_writeout(struct saa7146_dev *dev, __le32 *dword, int short_delay) +{ + u32 status = 0, mc2 = 0; + int trial = 0; + unsigned long timeout; + + /* write out i2c-command */ + DEB_I2C("before: 0x%08x (status: 0x%08x), %d\n", + *dword, saa7146_read(dev, I2C_STATUS), dev->i2c_op); + + if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) { + + saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); + saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword)); + + dev->i2c_op = 1; + SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17); + SAA7146_IER_ENABLE(dev, MASK_16|MASK_17); + saa7146_write(dev, MC2, (MASK_00 | MASK_16)); + + timeout = HZ/100 + 1; /* 10ms */ + timeout = wait_event_interruptible_timeout(dev->i2c_wq, dev->i2c_op == 0, timeout); + if (timeout == -ERESTARTSYS || dev->i2c_op) { + SAA7146_IER_DISABLE(dev, MASK_16|MASK_17); + SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17); + if (timeout == -ERESTARTSYS) + /* a signal arrived */ + return -ERESTARTSYS; + + pr_warn("%s %s [irq]: timed out waiting for end of xfer\n", + dev->name, __func__); + return -EIO; + } + status = saa7146_read(dev, I2C_STATUS); + } else { + saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); + saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword)); + saa7146_write(dev, MC2, (MASK_00 | MASK_16)); + + /* do not poll for i2c-status before upload is complete */ + timeout = jiffies + HZ/100 + 1; /* 10ms */ + while(1) { + mc2 = (saa7146_read(dev, MC2) & 0x1); + if( 0 != mc2 ) { + break; + } + if (time_after(jiffies,timeout)) { + pr_warn("%s %s: timed out waiting for MC2\n", + dev->name, __func__); + return -EIO; + } + } + /* wait until we get a transfer done or error */ + timeout = jiffies + HZ/100 + 1; /* 10ms */ + /* first read usually delivers bogus results... */ + saa7146_i2c_status(dev); + while(1) { + status = saa7146_i2c_status(dev); + if ((status & 0x3) != 1) + break; + if (time_after(jiffies,timeout)) { + /* this is normal when probing the bus + * (no answer from nonexisistant device...) + */ + pr_warn("%s %s [poll]: timed out waiting for end of xfer\n", + dev->name, __func__); + return -EIO; + } + if (++trial < 50 && short_delay) + udelay(10); + else + msleep(1); + } + } + + /* give a detailed status report */ + if ( 0 != (status & (SAA7146_I2C_SPERR | SAA7146_I2C_APERR | + SAA7146_I2C_DTERR | SAA7146_I2C_DRERR | + SAA7146_I2C_AL | SAA7146_I2C_ERR | + SAA7146_I2C_BUSY)) ) { + + if ( 0 == (status & SAA7146_I2C_ERR) || + 0 == (status & SAA7146_I2C_BUSY) ) { + /* it may take some time until ERR goes high - ignore */ + DEB_I2C("unexpected i2c status %04x\n", status); + } + if( 0 != (status & SAA7146_I2C_SPERR) ) { + DEB_I2C("error due to invalid start/stop condition\n"); + } + if( 0 != (status & SAA7146_I2C_DTERR) ) { + DEB_I2C("error in data transmission\n"); + } + if( 0 != (status & SAA7146_I2C_DRERR) ) { + DEB_I2C("error when receiving data\n"); + } + if( 0 != (status & SAA7146_I2C_AL) ) { + DEB_I2C("error because arbitration lost\n"); + } + + /* we handle address-errors here */ + if( 0 != (status & SAA7146_I2C_APERR) ) { + DEB_I2C("error in address phase\n"); + return -EREMOTEIO; + } + + return -EIO; + } + + /* read back data, just in case we were reading ... */ + *dword = cpu_to_le32(saa7146_read(dev, I2C_TRANSFER)); + + DEB_I2C("after: 0x%08x\n", *dword); + return 0; +} + +static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries) +{ + int i = 0, count = 0; + __le32 *buffer = dev->d_i2c.cpu_addr; + int err = 0; + int short_delay = 0; + + if (mutex_lock_interruptible(&dev->i2c_lock)) + return -ERESTARTSYS; + + for(i=0;i count ) { + err = -1; + goto out; + } + + if ( count > 3 || 0 != (SAA7146_I2C_SHORT_DELAY & dev->ext->flags) ) + short_delay = 1; + + do { + /* reset the i2c-device if necessary */ + err = saa7146_i2c_reset(dev); + if ( 0 > err ) { + DEB_I2C("could not reset i2c-device\n"); + goto out; + } + + /* write out the u32s one after another */ + for(i = 0; i < count; i++) { + err = saa7146_i2c_writeout(dev, &buffer[i], short_delay); + if ( 0 != err) { + /* this one is unsatisfying: some i2c slaves on some + dvb cards don't acknowledge correctly, so the saa7146 + thinks that an address error occurred. in that case, the + transaction should be retrying, even if an address error + occurred. analog saa7146 based cards extensively rely on + i2c address probing, however, and address errors indicate that a + device is really *not* there. retrying in that case + increases the time the device needs to probe greatly, so + it should be avoided. So we bail out in irq mode after an + address error and trust the saa7146 address error detection. */ + if (-EREMOTEIO == err && 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) + goto out; + DEB_I2C("error while sending message(s). starting again\n"); + break; + } + } + if( 0 == err ) { + err = num; + break; + } + + /* delay a bit before retrying */ + msleep(10); + + } while (err != num && retries--); + + /* quit if any error occurred */ + if (err != num) + goto out; + + /* if any things had to be read, get the results */ + if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) { + DEB_I2C("could not cleanup i2c-message\n"); + err = -1; + goto out; + } + + /* return the number of delivered messages */ + DEB_I2C("transmission successful. (msg:%d)\n", err); +out: + /* another bug in revision 0: the i2c-registers get uploaded randomly by other + uploads, so we better clear them out before continuing */ + if( 0 == dev->revision ) { + __le32 zero = 0; + saa7146_i2c_reset(dev); + if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) { + pr_info("revision 0 error. this should never happen\n"); + } + } + + mutex_unlock(&dev->i2c_lock); + return err; +} + +/* utility functions */ +static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num) +{ + struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter); + struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev); + + /* use helper function to transfer data */ + return saa7146_i2c_transfer(dev, msg, num, adapter->retries); +} + + +/*****************************************************************************/ +/* i2c-adapter helper functions */ + +/* exported algorithm data */ +static struct i2c_algorithm saa7146_algo = { + .master_xfer = saa7146_i2c_xfer, + .functionality = saa7146_i2c_func, +}; + +int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate) +{ + DEB_EE("bitrate: 0x%08x\n", bitrate); + + /* enable i2c-port pins */ + saa7146_write(dev, MC1, (MASK_08 | MASK_24)); + + dev->i2c_bitrate = bitrate; + saa7146_i2c_reset(dev); + + if (i2c_adapter) { + i2c_set_adapdata(i2c_adapter, &dev->v4l2_dev); + i2c_adapter->dev.parent = &dev->pci->dev; + i2c_adapter->algo = &saa7146_algo; + i2c_adapter->algo_data = NULL; + i2c_adapter->timeout = SAA7146_I2C_TIMEOUT; + i2c_adapter->retries = SAA7146_I2C_RETRIES; + } + + return 0; +} diff --git a/drivers/media/common/saa7146/saa7146_vbi.c b/drivers/media/common/saa7146/saa7146_vbi.c new file mode 100644 index 00000000..1e71e374 --- /dev/null +++ b/drivers/media/common/saa7146/saa7146_vbi.c @@ -0,0 +1,498 @@ +#include + +static int vbi_pixel_to_capture = 720 * 2; + +static int vbi_workaround(struct saa7146_dev *dev) +{ + struct saa7146_vv *vv = dev->vv_data; + + u32 *cpu; + dma_addr_t dma_addr; + + int count = 0; + int i; + + DECLARE_WAITQUEUE(wait, current); + + DEB_VBI("dev:%p\n", dev); + + /* once again, a bug in the saa7146: the brs acquisition + is buggy and especially the BXO-counter does not work + as specified. there is this workaround, but please + don't let me explain it. ;-) */ + + cpu = pci_alloc_consistent(dev->pci, 4096, &dma_addr); + if (NULL == cpu) + return -ENOMEM; + + /* setup some basic programming, just for the workaround */ + saa7146_write(dev, BASE_EVEN3, dma_addr); + saa7146_write(dev, BASE_ODD3, dma_addr+vbi_pixel_to_capture); + saa7146_write(dev, PROT_ADDR3, dma_addr+4096); + saa7146_write(dev, PITCH3, vbi_pixel_to_capture); + saa7146_write(dev, BASE_PAGE3, 0x0); + saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0)); + saa7146_write(dev, MC2, MASK_04|MASK_20); + + /* load brs-control register */ + WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); + /* BXO = 1h, BRS to outbound */ + WRITE_RPS1(0xc000008c); + /* wait for vbi_a or vbi_b*/ + if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) { + DEB_D("...using port b\n"); + WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B); + WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B); +/* + WRITE_RPS1(CMD_PAUSE | MASK_09); +*/ + } else { + DEB_D("...using port a\n"); + WRITE_RPS1(CMD_PAUSE | MASK_10); + } + /* upload brs */ + WRITE_RPS1(CMD_UPLOAD | MASK_08); + /* load brs-control register */ + WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); + /* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */ + WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19); + /* wait for brs_done */ + WRITE_RPS1(CMD_PAUSE | MASK_08); + /* upload brs */ + WRITE_RPS1(CMD_UPLOAD | MASK_08); + /* load video-dma3 NumLines3 and NumBytes3 */ + WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4)); + /* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */ + WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture)); + /* load brs-control register */ + WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); + /* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */ + WRITE_RPS1((540 << 7) | (5 << 19)); // 5 == vbi_start + /* wait for brs_done */ + WRITE_RPS1(CMD_PAUSE | MASK_08); + /* upload brs and video-dma3*/ + WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04); + /* load mc2 register: enable dma3 */ + WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4)); + WRITE_RPS1(MASK_20 | MASK_04); + /* generate interrupt */ + WRITE_RPS1(CMD_INTERRUPT); + /* stop rps1 */ + WRITE_RPS1(CMD_STOP); + + /* we have to do the workaround twice to be sure that + everything is ok */ + for(i = 0; i < 2; i++) { + + /* indicate to the irq handler that we do the workaround */ + saa7146_write(dev, MC2, MASK_31|MASK_15); + + saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0)); + saa7146_write(dev, MC2, MASK_04|MASK_20); + + /* enable rps1 irqs */ + SAA7146_IER_ENABLE(dev,MASK_28); + + /* prepare to wait to be woken up by the irq-handler */ + add_wait_queue(&vv->vbi_wq, &wait); + current->state = TASK_INTERRUPTIBLE; + + /* start rps1 to enable workaround */ + saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + saa7146_write(dev, MC1, (MASK_13 | MASK_29)); + + schedule(); + + DEB_VBI("brs bug workaround %d/1\n", i); + + remove_wait_queue(&vv->vbi_wq, &wait); + current->state = TASK_RUNNING; + + /* disable rps1 irqs */ + SAA7146_IER_DISABLE(dev,MASK_28); + + /* stop video-dma3 */ + saa7146_write(dev, MC1, MASK_20); + + if(signal_pending(current)) { + + DEB_VBI("aborted (rps:0x%08x)\n", + saa7146_read(dev, RPS_ADDR1)); + + /* stop rps1 for sure */ + saa7146_write(dev, MC1, MASK_29); + + pci_free_consistent(dev->pci, 4096, cpu, dma_addr); + return -EINTR; + } + } + + pci_free_consistent(dev->pci, 4096, cpu, dma_addr); + return 0; +} + +static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next) +{ + struct saa7146_vv *vv = dev->vv_data; + + struct saa7146_video_dma vdma3; + + int count = 0; + unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B; + unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B; + +/* + vdma3.base_even = 0xc8000000+2560*70; + vdma3.base_odd = 0xc8000000; + vdma3.prot_addr = 0xc8000000+2560*164; + vdma3.pitch = 2560; + vdma3.base_page = 0; + vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above! +*/ + vdma3.base_even = buf->pt[2].offset; + vdma3.base_odd = buf->pt[2].offset + 16 * vbi_pixel_to_capture; + vdma3.prot_addr = buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture; + vdma3.pitch = vbi_pixel_to_capture; + vdma3.base_page = buf->pt[2].dma | ME1; + vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture; + + saa7146_write_out_dma(dev, 3, &vdma3); + + /* write beginning of rps-program */ + count = 0; + + /* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */ + + /* we don't wait here for the first field anymore. this is different from the video + capture and might cause that the first buffer is only half filled (with only + one field). but since this is some sort of streaming data, this is not that negative. + but by doing this, we can use the whole engine from videobuf-dma-sg.c... */ + +/* + WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait); + WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait); +*/ + /* set bit 1 */ + WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4)); + WRITE_RPS1(MASK_28 | MASK_12); + + /* turn on video-dma3 */ + WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS1(MASK_04 | MASK_20); /* => mask */ + WRITE_RPS1(MASK_04 | MASK_20); /* => values */ + + /* wait for o_fid_a/b / e_fid_a/b toggle */ + WRITE_RPS1(CMD_PAUSE | o_wait); + WRITE_RPS1(CMD_PAUSE | e_wait); + + /* generate interrupt */ + WRITE_RPS1(CMD_INTERRUPT); + + /* stop */ + WRITE_RPS1(CMD_STOP); + + /* enable rps1 irqs */ + SAA7146_IER_ENABLE(dev, MASK_28); + + /* write the address of the rps-program */ + saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + + /* turn on rps */ + saa7146_write(dev, MC1, (MASK_13 | MASK_29)); +} + +static int buffer_activate(struct saa7146_dev *dev, + struct saa7146_buf *buf, + struct saa7146_buf *next) +{ + struct saa7146_vv *vv = dev->vv_data; + buf->vb.state = VIDEOBUF_ACTIVE; + + DEB_VBI("dev:%p, buf:%p, next:%p\n", dev, buf, next); + saa7146_set_vbi_capture(dev,buf,next); + + mod_timer(&vv->vbi_dmaq.timeout, jiffies+BUFFER_TIMEOUT); + return 0; +} + +static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field) +{ + struct file *file = q->priv_data; + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct saa7146_buf *buf = (struct saa7146_buf *)vb; + + int err = 0; + int lines, llength, size; + + lines = 16 * 2 ; /* 2 fields */ + llength = vbi_pixel_to_capture; + size = lines * llength; + + DEB_VBI("vb:%p\n", vb); + + if (0 != buf->vb.baddr && buf->vb.bsize < size) { + DEB_VBI("size mismatch\n"); + return -EINVAL; + } + + if (buf->vb.size != size) + saa7146_dma_free(dev,q,buf); + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + buf->vb.width = llength; + buf->vb.height = lines; + buf->vb.size = size; + buf->vb.field = field; // FIXME: check this + + saa7146_pgtable_free(dev->pci, &buf->pt[2]); + saa7146_pgtable_alloc(dev->pci, &buf->pt[2]); + + err = videobuf_iolock(q,&buf->vb, NULL); + if (err) + goto oops; + err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2], + dma->sglist, dma->sglen); + if (0 != err) + return err; + } + buf->vb.state = VIDEOBUF_PREPARED; + buf->activate = buffer_activate; + + return 0; + + oops: + DEB_VBI("error out\n"); + saa7146_dma_free(dev,q,buf); + + return err; +} + +static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + int llength,lines; + + lines = 16 * 2 ; /* 2 fields */ + llength = vbi_pixel_to_capture; + + *size = lines * llength; + *count = 2; + + DEB_VBI("count:%d, size:%d\n", *count, *size); + + return 0; +} + +static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct file *file = q->priv_data; + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_buf *buf = (struct saa7146_buf *)vb; + + DEB_VBI("vb:%p\n", vb); + saa7146_buffer_queue(dev, &vv->vbi_dmaq, buf); +} + +static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct file *file = q->priv_data; + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct saa7146_buf *buf = (struct saa7146_buf *)vb; + + DEB_VBI("vb:%p\n", vb); + saa7146_dma_free(dev,q,buf); +} + +static struct videobuf_queue_ops vbi_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* ------------------------------------------------------------------ */ + +static void vbi_stop(struct saa7146_fh *fh, struct file *file) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + unsigned long flags; + DEB_VBI("dev:%p, fh:%p\n", dev, fh); + + spin_lock_irqsave(&dev->slock,flags); + + /* disable rps1 */ + saa7146_write(dev, MC1, MASK_29); + + /* disable rps1 irqs */ + SAA7146_IER_DISABLE(dev, MASK_28); + + /* shut down dma 3 transfers */ + saa7146_write(dev, MC1, MASK_20); + + if (vv->vbi_dmaq.curr) + saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE); + + videobuf_queue_cancel(&fh->vbi_q); + + vv->vbi_streaming = NULL; + + del_timer(&vv->vbi_dmaq.timeout); + del_timer(&vv->vbi_read_timeout); + + spin_unlock_irqrestore(&dev->slock, flags); +} + +static void vbi_read_timeout(unsigned long data) +{ + struct file *file = (struct file*)data; + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + + DEB_VBI("dev:%p, fh:%p\n", dev, fh); + + vbi_stop(fh, file); +} + +static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv) +{ + DEB_VBI("dev:%p\n", dev); + + INIT_LIST_HEAD(&vv->vbi_dmaq.queue); + + init_timer(&vv->vbi_dmaq.timeout); + vv->vbi_dmaq.timeout.function = saa7146_buffer_timeout; + vv->vbi_dmaq.timeout.data = (unsigned long)(&vv->vbi_dmaq); + vv->vbi_dmaq.dev = dev; + + init_waitqueue_head(&vv->vbi_wq); +} + +static int vbi_open(struct saa7146_dev *dev, struct file *file) +{ + struct saa7146_fh *fh = file->private_data; + struct saa7146_vv *vv = fh->dev->vv_data; + + u32 arbtr_ctrl = saa7146_read(dev, PCI_BT_V1); + int ret = 0; + + DEB_VBI("dev:%p, fh:%p\n", dev, fh); + + ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS); + if (0 == ret) { + DEB_S("cannot get vbi RESOURCE_DMA3_BRS resource\n"); + return -EBUSY; + } + + /* adjust arbitrition control for video dma 3 */ + arbtr_ctrl &= ~0x1f0000; + arbtr_ctrl |= 0x1d0000; + saa7146_write(dev, PCI_BT_V1, arbtr_ctrl); + saa7146_write(dev, MC2, (MASK_04|MASK_20)); + + videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_FIELD_SEQ_TB, // FIXME: does this really work? + sizeof(struct saa7146_buf), + file, &dev->v4l2_lock); + + vv->vbi_read_timeout.function = vbi_read_timeout; + vv->vbi_read_timeout.data = (unsigned long)file; + + /* initialize the brs */ + if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) { + saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19)); + } else { + saa7146_write(dev, BRS_CTRL, 0x00000001); + + if (0 != (ret = vbi_workaround(dev))) { + DEB_VBI("vbi workaround failed!\n"); + /* return ret;*/ + } + } + + /* upload brs register */ + saa7146_write(dev, MC2, (MASK_08|MASK_24)); + return 0; +} + +static void vbi_close(struct saa7146_dev *dev, struct file *file) +{ + struct saa7146_fh *fh = file->private_data; + struct saa7146_vv *vv = dev->vv_data; + DEB_VBI("dev:%p, fh:%p\n", dev, fh); + + if( fh == vv->vbi_streaming ) { + vbi_stop(fh, file); + } + saa7146_res_free(fh, RESOURCE_DMA3_BRS); +} + +static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status) +{ + struct saa7146_vv *vv = dev->vv_data; + spin_lock(&dev->slock); + + if (vv->vbi_dmaq.curr) { + DEB_VBI("dev:%p, curr:%p\n", dev, vv->vbi_dmaq.curr); + /* this must be += 2, one count for each field */ + vv->vbi_fieldcount+=2; + vv->vbi_dmaq.curr->vb.field_count = vv->vbi_fieldcount; + saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE); + } else { + DEB_VBI("dev:%p\n", dev); + } + saa7146_buffer_next(dev, &vv->vbi_dmaq, 1); + + spin_unlock(&dev->slock); +} + +static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos) +{ + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + ssize_t ret = 0; + + DEB_VBI("dev:%p, fh:%p\n", dev, fh); + + if( NULL == vv->vbi_streaming ) { + // fixme: check if dma3 is available + // fixme: activate vbi engine here if necessary. (really?) + vv->vbi_streaming = fh; + } + + if( fh != vv->vbi_streaming ) { + DEB_VBI("open %p is already using vbi capture\n", + vv->vbi_streaming); + return -EBUSY; + } + + mod_timer(&vv->vbi_read_timeout, jiffies+BUFFER_TIMEOUT); + ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1, + file->f_flags & O_NONBLOCK); +/* + printk("BASE_ODD3: 0x%08x\n", saa7146_read(dev, BASE_ODD3)); + printk("BASE_EVEN3: 0x%08x\n", saa7146_read(dev, BASE_EVEN3)); + printk("PROT_ADDR3: 0x%08x\n", saa7146_read(dev, PROT_ADDR3)); + printk("PITCH3: 0x%08x\n", saa7146_read(dev, PITCH3)); + printk("BASE_PAGE3: 0x%08x\n", saa7146_read(dev, BASE_PAGE3)); + printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3)); + printk("BRS_CTRL: 0x%08x\n", saa7146_read(dev, BRS_CTRL)); +*/ + return ret; +} + +struct saa7146_use_ops saa7146_vbi_uops = { + .init = vbi_init, + .open = vbi_open, + .release = vbi_close, + .irq_done = vbi_irq_done, + .read = vbi_read, +}; diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c new file mode 100644 index 00000000..fe907f2e --- /dev/null +++ b/drivers/media/common/saa7146/saa7146_video.c @@ -0,0 +1,1332 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include + +static int max_memory = 32; + +module_param(max_memory, int, 0644); +MODULE_PARM_DESC(max_memory, "maximum memory usage for capture buffers (default: 32Mb)"); + +#define IS_CAPTURE_ACTIVE(fh) \ + (((vv->video_status & STATUS_CAPTURE) != 0) && (vv->video_fh == fh)) + +#define IS_OVERLAY_ACTIVE(fh) \ + (((vv->video_status & STATUS_OVERLAY) != 0) && (vv->video_fh == fh)) + +/* format descriptions for capture and preview */ +static struct saa7146_format formats[] = { + { + .name = "RGB-8 (3-3-2)", + .pixelformat = V4L2_PIX_FMT_RGB332, + .trans = RGB08_COMPOSED, + .depth = 8, + .flags = 0, + }, { + .name = "RGB-16 (5/B-6/G-5/R)", + .pixelformat = V4L2_PIX_FMT_RGB565, + .trans = RGB16_COMPOSED, + .depth = 16, + .flags = 0, + }, { + .name = "RGB-24 (B-G-R)", + .pixelformat = V4L2_PIX_FMT_BGR24, + .trans = RGB24_COMPOSED, + .depth = 24, + .flags = 0, + }, { + .name = "RGB-32 (B-G-R)", + .pixelformat = V4L2_PIX_FMT_BGR32, + .trans = RGB32_COMPOSED, + .depth = 32, + .flags = 0, + }, { + .name = "RGB-32 (R-G-B)", + .pixelformat = V4L2_PIX_FMT_RGB32, + .trans = RGB32_COMPOSED, + .depth = 32, + .flags = 0, + .swap = 0x2, + }, { + .name = "Greyscale-8", + .pixelformat = V4L2_PIX_FMT_GREY, + .trans = Y8, + .depth = 8, + .flags = 0, + }, { + .name = "YUV 4:2:2 planar (Y-Cb-Cr)", + .pixelformat = V4L2_PIX_FMT_YUV422P, + .trans = YUV422_DECOMPOSED, + .depth = 16, + .flags = FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR, + }, { + .name = "YVU 4:2:0 planar (Y-Cb-Cr)", + .pixelformat = V4L2_PIX_FMT_YVU420, + .trans = YUV420_DECOMPOSED, + .depth = 12, + .flags = FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR, + }, { + .name = "YUV 4:2:0 planar (Y-Cb-Cr)", + .pixelformat = V4L2_PIX_FMT_YUV420, + .trans = YUV420_DECOMPOSED, + .depth = 12, + .flags = FORMAT_IS_PLANAR, + }, { + .name = "YUV 4:2:2 (U-Y-V-Y)", + .pixelformat = V4L2_PIX_FMT_UYVY, + .trans = YUV422_COMPOSED, + .depth = 16, + .flags = 0, + } +}; + +/* unfortunately, the saa7146 contains a bug which prevents it from doing on-the-fly byte swaps. + due to this, it's impossible to provide additional *packed* formats, which are simply byte swapped + (like V4L2_PIX_FMT_YUYV) ... 8-( */ + +static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format); + +struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc) +{ + int i, j = NUM_FORMATS; + + for (i = 0; i < j; i++) { + if (formats[i].pixelformat == fourcc) { + return formats+i; + } + } + + DEB_D("unknown pixelformat:'%4.4s'\n", (char *)&fourcc); + return NULL; +} + +static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f); + +int saa7146_start_preview(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + struct v4l2_format fmt; + int ret = 0, err = 0; + + DEB_EE("dev:%p, fh:%p\n", dev, fh); + + /* check if we have overlay information */ + if (vv->ov.fh == NULL) { + DEB_D("no overlay data available. try S_FMT first.\n"); + return -EAGAIN; + } + + /* check if streaming capture is running */ + if (IS_CAPTURE_ACTIVE(fh) != 0) { + DEB_D("streaming capture is active\n"); + return -EBUSY; + } + + /* check if overlay is running */ + if (IS_OVERLAY_ACTIVE(fh) != 0) { + if (vv->video_fh == fh) { + DEB_D("overlay is already active\n"); + return 0; + } + DEB_D("overlay is already active in another open\n"); + return -EBUSY; + } + + if (0 == saa7146_res_get(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP)) { + DEB_D("cannot get necessary overlay resources\n"); + return -EBUSY; + } + + fmt.fmt.win = vv->ov.win; + err = vidioc_try_fmt_vid_overlay(NULL, fh, &fmt); + if (0 != err) { + saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP); + return -EBUSY; + } + vv->ov.win = fmt.fmt.win; + + DEB_D("%dx%d+%d+%d %s field=%s\n", + vv->ov.win.w.width, vv->ov.win.w.height, + vv->ov.win.w.left, vv->ov.win.w.top, + vv->ov_fmt->name, v4l2_field_names[vv->ov.win.field]); + + if (0 != (ret = saa7146_enable_overlay(fh))) { + DEB_D("enabling overlay failed: %d\n", ret); + saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP); + return ret; + } + + vv->video_status = STATUS_OVERLAY; + vv->video_fh = fh; + + return 0; +} +EXPORT_SYMBOL_GPL(saa7146_start_preview); + +int saa7146_stop_preview(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + + DEB_EE("dev:%p, fh:%p\n", dev, fh); + + /* check if streaming capture is running */ + if (IS_CAPTURE_ACTIVE(fh) != 0) { + DEB_D("streaming capture is active\n"); + return -EBUSY; + } + + /* check if overlay is running at all */ + if ((vv->video_status & STATUS_OVERLAY) == 0) { + DEB_D("no active overlay\n"); + return 0; + } + + if (vv->video_fh != fh) { + DEB_D("overlay is active, but in another open\n"); + return -EBUSY; + } + + vv->video_status = 0; + vv->video_fh = NULL; + + saa7146_disable_overlay(fh); + + saa7146_res_free(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP); + + return 0; +} +EXPORT_SYMBOL_GPL(saa7146_stop_preview); + +/********************************************************************************/ +/* common pagetable functions */ + +static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *buf) +{ + struct pci_dev *pci = dev->pci; + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + struct scatterlist *list = dma->sglist; + int length = dma->sglen; + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); + + DEB_EE("dev:%p, buf:%p, sg_len:%d\n", dev, buf, length); + + if( 0 != IS_PLANAR(sfmt->trans)) { + struct saa7146_pgtable *pt1 = &buf->pt[0]; + struct saa7146_pgtable *pt2 = &buf->pt[1]; + struct saa7146_pgtable *pt3 = &buf->pt[2]; + __le32 *ptr1, *ptr2, *ptr3; + __le32 fill; + + int size = buf->fmt->width*buf->fmt->height; + int i,p,m1,m2,m3,o1,o2; + + switch( sfmt->depth ) { + case 12: { + /* create some offsets inside the page table */ + m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1; + m2 = ((size+(size/4)+PAGE_SIZE)/PAGE_SIZE)-1; + m3 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1; + o1 = size%PAGE_SIZE; + o2 = (size+(size/4))%PAGE_SIZE; + DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n", + size, m1, m2, m3, o1, o2); + break; + } + case 16: { + /* create some offsets inside the page table */ + m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1; + m2 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1; + m3 = ((2*size+PAGE_SIZE)/PAGE_SIZE)-1; + o1 = size%PAGE_SIZE; + o2 = (size+(size/2))%PAGE_SIZE; + DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n", + size, m1, m2, m3, o1, o2); + break; + } + default: { + return -1; + } + } + + ptr1 = pt1->cpu; + ptr2 = pt2->cpu; + ptr3 = pt3->cpu; + + /* walk all pages, copy all page addresses to ptr1 */ + for (i = 0; i < length; i++, list++) { + for (p = 0; p * 4096 < list->length; p++, ptr1++) { + *ptr1 = cpu_to_le32(sg_dma_address(list) - list->offset); + } + } +/* + ptr1 = pt1->cpu; + for(j=0;j<40;j++) { + printk("ptr1 %d: 0x%08x\n",j,ptr1[j]); + } +*/ + + /* if we have a user buffer, the first page may not be + aligned to a page boundary. */ + pt1->offset = dma->sglist->offset; + pt2->offset = pt1->offset+o1; + pt3->offset = pt1->offset+o2; + + /* create video-dma2 page table */ + ptr1 = pt1->cpu; + for(i = m1; i <= m2 ; i++, ptr2++) { + *ptr2 = ptr1[i]; + } + fill = *(ptr2-1); + for(;i<1024;i++,ptr2++) { + *ptr2 = fill; + } + /* create video-dma3 page table */ + ptr1 = pt1->cpu; + for(i = m2; i <= m3; i++,ptr3++) { + *ptr3 = ptr1[i]; + } + fill = *(ptr3-1); + for(;i<1024;i++,ptr3++) { + *ptr3 = fill; + } + /* finally: finish up video-dma1 page table */ + ptr1 = pt1->cpu+m1; + fill = pt1->cpu[m1]; + for(i=m1;i<1024;i++,ptr1++) { + *ptr1 = fill; + } +/* + ptr1 = pt1->cpu; + ptr2 = pt2->cpu; + ptr3 = pt3->cpu; + for(j=0;j<40;j++) { + printk("ptr1 %d: 0x%08x\n",j,ptr1[j]); + } + for(j=0;j<40;j++) { + printk("ptr2 %d: 0x%08x\n",j,ptr2[j]); + } + for(j=0;j<40;j++) { + printk("ptr3 %d: 0x%08x\n",j,ptr3[j]); + } +*/ + } else { + struct saa7146_pgtable *pt = &buf->pt[0]; + return saa7146_pgtable_build_single(pci, pt, list, length); + } + + return 0; +} + + +/********************************************************************************/ +/* file operations */ + +static int video_begin(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_format *fmt = NULL; + unsigned int resource; + int ret = 0, err = 0; + + DEB_EE("dev:%p, fh:%p\n", dev, fh); + + if ((vv->video_status & STATUS_CAPTURE) != 0) { + if (vv->video_fh == fh) { + DEB_S("already capturing\n"); + return 0; + } + DEB_S("already capturing in another open\n"); + return -EBUSY; + } + + if ((vv->video_status & STATUS_OVERLAY) != 0) { + DEB_S("warning: suspending overlay video for streaming capture\n"); + vv->ov_suspend = vv->video_fh; + err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */ + if (0 != err) { + DEB_D("suspending video failed. aborting\n"); + return err; + } + } + + fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat); + /* we need to have a valid format set here */ + BUG_ON(NULL == fmt); + + if (0 != (fmt->flags & FORMAT_IS_PLANAR)) { + resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS; + } else { + resource = RESOURCE_DMA1_HPS; + } + + ret = saa7146_res_get(fh, resource); + if (0 == ret) { + DEB_S("cannot get capture resource %d\n", resource); + if (vv->ov_suspend != NULL) { + saa7146_start_preview(vv->ov_suspend); + vv->ov_suspend = NULL; + } + return -EBUSY; + } + + /* clear out beginning of streaming bit (rps register 0)*/ + saa7146_write(dev, MC2, MASK_27 ); + + /* enable rps0 irqs */ + SAA7146_IER_ENABLE(dev, MASK_27); + + vv->video_fh = fh; + vv->video_status = STATUS_CAPTURE; + + return 0; +} + +static int video_end(struct saa7146_fh *fh, struct file *file) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_format *fmt = NULL; + unsigned long flags; + unsigned int resource; + u32 dmas = 0; + DEB_EE("dev:%p, fh:%p\n", dev, fh); + + if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) { + DEB_S("not capturing\n"); + return 0; + } + + if (vv->video_fh != fh) { + DEB_S("capturing, but in another open\n"); + return -EBUSY; + } + + fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat); + /* we need to have a valid format set here */ + BUG_ON(NULL == fmt); + + if (0 != (fmt->flags & FORMAT_IS_PLANAR)) { + resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS; + dmas = MASK_22 | MASK_21 | MASK_20; + } else { + resource = RESOURCE_DMA1_HPS; + dmas = MASK_22; + } + spin_lock_irqsave(&dev->slock,flags); + + /* disable rps0 */ + saa7146_write(dev, MC1, MASK_28); + + /* disable rps0 irqs */ + SAA7146_IER_DISABLE(dev, MASK_27); + + /* shut down all used video dma transfers */ + saa7146_write(dev, MC1, dmas); + + spin_unlock_irqrestore(&dev->slock, flags); + + vv->video_fh = NULL; + vv->video_status = 0; + + saa7146_res_free(fh, resource); + + if (vv->ov_suspend != NULL) { + saa7146_start_preview(vv->ov_suspend); + vv->ov_suspend = NULL; + } + + return 0; +} + +static int vidioc_querycap(struct file *file, void *fh, struct v4l2_capability *cap) +{ + struct video_device *vdev = video_devdata(file); + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + + strcpy((char *)cap->driver, "saa7146 v4l2"); + strlcpy((char *)cap->card, dev->ext->name, sizeof(cap->card)); + sprintf((char *)cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cap->device_caps = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_VIDEO_OVERLAY | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING; + cap->device_caps |= dev->ext_vv_data->capabilities; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + if (vdev->vfl_type == VFL_TYPE_GRABBER) + cap->device_caps &= + ~(V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_OUTPUT); + else + cap->device_caps &= + ~(V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_AUDIO); + return 0; +} + +static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + + *fb = vv->ov_fb; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; + fb->flags = V4L2_FBUF_FLAG_PRIMARY; + return 0; +} + +static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_format *fmt; + + DEB_EE("VIDIOC_S_FBUF\n"); + + if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* check args */ + fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat); + if (NULL == fmt) + return -EINVAL; + + /* planar formats are not allowed for overlay video, clipping and video dma would clash */ + if (fmt->flags & FORMAT_IS_PLANAR) + DEB_S("planar pixelformat '%4.4s' not allowed for overlay\n", + (char *)&fmt->pixelformat); + + /* check if overlay is running */ + if (IS_OVERLAY_ACTIVE(fh) != 0) { + if (vv->video_fh != fh) { + DEB_D("refusing to change framebuffer informations while overlay is active in another open\n"); + return -EBUSY; + } + } + + /* ok, accept it */ + vv->ov_fb = *fb; + vv->ov_fmt = fmt; + + if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) { + vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8; + DEB_D("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline); + } + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f) +{ + if (f->index >= NUM_FORMATS) + return -EINVAL; + strlcpy((char *)f->description, formats[f->index].name, + sizeof(f->description)); + f->pixelformat = formats[f->index].pixelformat; + return 0; +} + +int saa7146_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct saa7146_dev *dev = container_of(ctrl->handler, + struct saa7146_dev, ctrl_handler); + struct saa7146_vv *vv = dev->vv_data; + u32 val; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + val = saa7146_read(dev, BCS_CTRL); + val &= 0x00ffffff; + val |= (ctrl->val << 24); + saa7146_write(dev, BCS_CTRL, val); + saa7146_write(dev, MC2, MASK_22 | MASK_06); + break; + + case V4L2_CID_CONTRAST: + val = saa7146_read(dev, BCS_CTRL); + val &= 0xff00ffff; + val |= (ctrl->val << 16); + saa7146_write(dev, BCS_CTRL, val); + saa7146_write(dev, MC2, MASK_22 | MASK_06); + break; + + case V4L2_CID_SATURATION: + val = saa7146_read(dev, BCS_CTRL); + val &= 0xffffff00; + val |= (ctrl->val << 0); + saa7146_write(dev, BCS_CTRL, val); + saa7146_write(dev, MC2, MASK_22 | MASK_06); + break; + + case V4L2_CID_HFLIP: + /* fixme: we can support changing VFLIP and HFLIP here... */ + if ((vv->video_status & STATUS_CAPTURE)) + return -EBUSY; + vv->hflip = ctrl->val; + break; + + case V4L2_CID_VFLIP: + if ((vv->video_status & STATUS_CAPTURE)) + return -EBUSY; + vv->vflip = ctrl->val; + break; + + default: + return -EINVAL; + } + + if ((vv->video_status & STATUS_OVERLAY) != 0) { /* CHECK: && (vv->video_fh == fh)) */ + struct saa7146_fh *fh = vv->video_fh; + + saa7146_stop_preview(fh); + saa7146_start_preview(fh); + } + return 0; +} + +static int vidioc_g_parm(struct file *file, void *fh, + struct v4l2_streamparm *parm) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + parm->parm.capture.readbuffers = 1; + v4l2_video_std_frame_period(vv->standard->id, + &parm->parm.capture.timeperframe); + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + + f->fmt.pix = vv->video_fmt; + return 0; +} + +static int vidioc_g_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + + f->fmt.win = vv->ov.win; + return 0; +} + +static int vidioc_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + + f->fmt.vbi = vv->vbi_fmt; + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_format *fmt; + enum v4l2_field field; + int maxw, maxh; + int calc_bpl; + + DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh); + + fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + + field = f->fmt.pix.field; + maxw = vv->standard->h_max_out; + maxh = vv->standard->v_max_out; + + if (V4L2_FIELD_ANY == field) { + field = (f->fmt.pix.height > maxh / 2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; + } + switch (field) { + case V4L2_FIELD_ALTERNATE: + vv->last_field = V4L2_FIELD_TOP; + maxh = maxh / 2; + break; + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + vv->last_field = V4L2_FIELD_INTERLACED; + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + vv->last_field = V4L2_FIELD_INTERLACED; + break; + default: + DEB_D("no known field mode '%d'\n", field); + return -EINVAL; + } + + f->fmt.pix.field = field; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + if (f->fmt.pix.width > maxw) + f->fmt.pix.width = maxw; + if (f->fmt.pix.height > maxh) + f->fmt.pix.height = maxh; + + calc_bpl = (f->fmt.pix.width * fmt->depth) / 8; + + if (f->fmt.pix.bytesperline < calc_bpl) + f->fmt.pix.bytesperline = calc_bpl; + + if (f->fmt.pix.bytesperline > (2 * PAGE_SIZE * fmt->depth) / 8) /* arbitrary constraint */ + f->fmt.pix.bytesperline = calc_bpl; + + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height; + DEB_D("w:%d, h:%d, bytesperline:%d, sizeimage:%d\n", + f->fmt.pix.width, f->fmt.pix.height, + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage); + + return 0; +} + + +static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + struct v4l2_window *win = &f->fmt.win; + enum v4l2_field field; + int maxw, maxh; + + DEB_EE("dev:%p\n", dev); + + if (NULL == vv->ov_fb.base) { + DEB_D("no fb base set\n"); + return -EINVAL; + } + if (NULL == vv->ov_fmt) { + DEB_D("no fb fmt set\n"); + return -EINVAL; + } + if (win->w.width < 48 || win->w.height < 32) { + DEB_D("min width/height. (%d,%d)\n", + win->w.width, win->w.height); + return -EINVAL; + } + if (win->clipcount > 16) { + DEB_D("clipcount too big\n"); + return -EINVAL; + } + + field = win->field; + maxw = vv->standard->h_max_out; + maxh = vv->standard->v_max_out; + + if (V4L2_FIELD_ANY == field) { + field = (win->w.height > maxh / 2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_TOP; + } + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_ALTERNATE: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + DEB_D("no known field mode '%d'\n", field); + return -EINVAL; + } + + win->field = field; + if (win->w.width > maxw) + win->w.width = maxw; + if (win->w.height > maxh) + win->w.height = maxh; + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *__fh, struct v4l2_format *f) +{ + struct saa7146_fh *fh = __fh; + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + int err; + + DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh); + if (IS_CAPTURE_ACTIVE(fh) != 0) { + DEB_EE("streaming capture is active\n"); + return -EBUSY; + } + err = vidioc_try_fmt_vid_cap(file, fh, f); + if (0 != err) + return err; + vv->video_fmt = f->fmt.pix; + DEB_EE("set to pixelformat '%4.4s'\n", + (char *)&vv->video_fmt.pixelformat); + return 0; +} + +static int vidioc_s_fmt_vid_overlay(struct file *file, void *__fh, struct v4l2_format *f) +{ + struct saa7146_fh *fh = __fh; + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + int err; + + DEB_EE("V4L2_BUF_TYPE_VIDEO_OVERLAY: dev:%p, fh:%p\n", dev, fh); + err = vidioc_try_fmt_vid_overlay(file, fh, f); + if (0 != err) + return err; + vv->ov.win = f->fmt.win; + vv->ov.nclips = f->fmt.win.clipcount; + if (vv->ov.nclips > 16) + vv->ov.nclips = 16; + if (copy_from_user(vv->ov.clips, f->fmt.win.clips, + sizeof(struct v4l2_clip) * vv->ov.nclips)) { + return -EFAULT; + } + + /* vv->ov.fh is used to indicate that we have valid overlay informations, too */ + vv->ov.fh = fh; + + /* check if our current overlay is active */ + if (IS_OVERLAY_ACTIVE(fh) != 0) { + saa7146_stop_preview(fh); + saa7146_start_preview(fh); + } + return 0; +} + +static int vidioc_g_std(struct file *file, void *fh, v4l2_std_id *norm) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + + *norm = vv->standard->id; + return 0; +} + + /* the saa7146 supfhrts (used in conjunction with the saa7111a for example) + PAL / NTSC / SECAM. if your hardware does not (or does more) + -- override this function in your extension */ +/* + case VIDIOC_ENUMSTD: + { + struct v4l2_standard *e = arg; + if (e->index < 0 ) + return -EINVAL; + if( e->index < dev->ext_vv_data->num_stds ) { + DEB_EE("VIDIOC_ENUMSTD: index:%d\n", e->index); + v4l2_video_std_construct(e, dev->ext_vv_data->stds[e->index].id, dev->ext_vv_data->stds[e->index].name); + return 0; + } + return -EINVAL; + } + */ + +static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id id) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct saa7146_vv *vv = dev->vv_data; + int found = 0; + int err, i; + + DEB_EE("VIDIOC_S_STD\n"); + + if ((vv->video_status & STATUS_CAPTURE) == STATUS_CAPTURE) { + DEB_D("cannot change video standard while streaming capture is active\n"); + return -EBUSY; + } + + if ((vv->video_status & STATUS_OVERLAY) != 0) { + vv->ov_suspend = vv->video_fh; + err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */ + if (0 != err) { + DEB_D("suspending video failed. aborting\n"); + return err; + } + } + + for (i = 0; i < dev->ext_vv_data->num_stds; i++) + if (id & dev->ext_vv_data->stds[i].id) + break; + if (i != dev->ext_vv_data->num_stds) { + vv->standard = &dev->ext_vv_data->stds[i]; + if (NULL != dev->ext_vv_data->std_callback) + dev->ext_vv_data->std_callback(dev, vv->standard); + found = 1; + } + + if (vv->ov_suspend != NULL) { + saa7146_start_preview(vv->ov_suspend); + vv->ov_suspend = NULL; + } + + if (!found) { + DEB_EE("VIDIOC_S_STD: standard not found\n"); + return -EINVAL; + } + + DEB_EE("VIDIOC_S_STD: set to standard to '%s'\n", vv->standard->name); + return 0; +} + +static int vidioc_overlay(struct file *file, void *fh, unsigned int on) +{ + int err; + + DEB_D("VIDIOC_OVERLAY on:%d\n", on); + if (on) + err = saa7146_start_preview(fh); + else + err = saa7146_stop_preview(fh); + return err; +} + +static int vidioc_reqbufs(struct file *file, void *__fh, struct v4l2_requestbuffers *b) +{ + struct saa7146_fh *fh = __fh; + + if (b->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + return videobuf_reqbufs(&fh->video_q, b); + if (b->type == V4L2_BUF_TYPE_VBI_CAPTURE) + return videobuf_reqbufs(&fh->vbi_q, b); + return -EINVAL; +} + +static int vidioc_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf) +{ + struct saa7146_fh *fh = __fh; + + if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + return videobuf_querybuf(&fh->video_q, buf); + if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE) + return videobuf_querybuf(&fh->vbi_q, buf); + return -EINVAL; +} + +static int vidioc_qbuf(struct file *file, void *__fh, struct v4l2_buffer *buf) +{ + struct saa7146_fh *fh = __fh; + + if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + return videobuf_qbuf(&fh->video_q, buf); + if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE) + return videobuf_qbuf(&fh->vbi_q, buf); + return -EINVAL; +} + +static int vidioc_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf) +{ + struct saa7146_fh *fh = __fh; + + if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + return videobuf_dqbuf(&fh->video_q, buf, file->f_flags & O_NONBLOCK); + if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE) + return videobuf_dqbuf(&fh->vbi_q, buf, file->f_flags & O_NONBLOCK); + return -EINVAL; +} + +static int vidioc_streamon(struct file *file, void *__fh, enum v4l2_buf_type type) +{ + struct saa7146_fh *fh = __fh; + int err; + + DEB_D("VIDIOC_STREAMON, type:%d\n", type); + + err = video_begin(fh); + if (err) + return err; + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + return videobuf_streamon(&fh->video_q); + if (type == V4L2_BUF_TYPE_VBI_CAPTURE) + return videobuf_streamon(&fh->vbi_q); + return -EINVAL; +} + +static int vidioc_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type) +{ + struct saa7146_fh *fh = __fh; + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + int err; + + DEB_D("VIDIOC_STREAMOFF, type:%d\n", type); + + /* ugly: we need to copy some checks from video_end(), + because videobuf_streamoff() relies on the capture running. + check and fix this */ + if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) { + DEB_S("not capturing\n"); + return 0; + } + + if (vv->video_fh != fh) { + DEB_S("capturing, but in another open\n"); + return -EBUSY; + } + + err = -EINVAL; + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + err = videobuf_streamoff(&fh->video_q); + else if (type == V4L2_BUF_TYPE_VBI_CAPTURE) + err = videobuf_streamoff(&fh->vbi_q); + if (0 != err) { + DEB_D("warning: videobuf_streamoff() failed\n"); + video_end(fh, file); + } else { + err = video_end(fh, file); + } + return err; +} + +static int vidioc_g_chip_ident(struct file *file, void *__fh, + struct v4l2_dbg_chip_ident *chip) +{ + struct saa7146_fh *fh = __fh; + struct saa7146_dev *dev = fh->dev; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type == V4L2_CHIP_MATCH_HOST) { + if (v4l2_chip_match_host(&chip->match)) + chip->ident = V4L2_IDENT_SAA7146; + return 0; + } + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + return v4l2_device_call_until_err(&dev->v4l2_dev, 0, + core, g_chip_ident, chip); +} + +const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay, + .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, + .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, + .vidioc_g_chip_ident = vidioc_g_chip_ident, + + .vidioc_overlay = vidioc_overlay, + .vidioc_g_fbuf = vidioc_g_fbuf, + .vidioc_s_fbuf = vidioc_s_fbuf, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_parm = vidioc_g_parm, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, + .vidioc_g_chip_ident = vidioc_g_chip_ident, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_parm = vidioc_g_parm, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/*********************************************************************************/ +/* buffer handling functions */ + +static int buffer_activate (struct saa7146_dev *dev, + struct saa7146_buf *buf, + struct saa7146_buf *next) +{ + struct saa7146_vv *vv = dev->vv_data; + + buf->vb.state = VIDEOBUF_ACTIVE; + saa7146_set_capture(dev,buf,next); + + mod_timer(&vv->video_dmaq.timeout, jiffies+BUFFER_TIMEOUT); + return 0; +} + +static void release_all_pagetables(struct saa7146_dev *dev, struct saa7146_buf *buf) +{ + saa7146_pgtable_free(dev->pci, &buf->pt[0]); + saa7146_pgtable_free(dev->pci, &buf->pt[1]); + saa7146_pgtable_free(dev->pci, &buf->pt[2]); +} + +static int buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct file *file = q->priv_data; + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_buf *buf = (struct saa7146_buf *)vb; + int size,err = 0; + + DEB_CAP("vbuf:%p\n", vb); + + /* sanity checks */ + if (vv->video_fmt.width < 48 || + vv->video_fmt.height < 32 || + vv->video_fmt.width > vv->standard->h_max_out || + vv->video_fmt.height > vv->standard->v_max_out) { + DEB_D("w (%d) / h (%d) out of bounds\n", + vv->video_fmt.width, vv->video_fmt.height); + return -EINVAL; + } + + size = vv->video_fmt.sizeimage; + if (0 != buf->vb.baddr && buf->vb.bsize < size) { + DEB_D("size mismatch\n"); + return -EINVAL; + } + + DEB_CAP("buffer_prepare [size=%dx%d,bytes=%d,fields=%s]\n", + vv->video_fmt.width, vv->video_fmt.height, + size, v4l2_field_names[vv->video_fmt.field]); + if (buf->vb.width != vv->video_fmt.width || + buf->vb.bytesperline != vv->video_fmt.bytesperline || + buf->vb.height != vv->video_fmt.height || + buf->vb.size != size || + buf->vb.field != field || + buf->vb.field != vv->video_fmt.field || + buf->fmt != &vv->video_fmt) { + saa7146_dma_free(dev,q,buf); + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + struct saa7146_format *sfmt; + + buf->vb.bytesperline = vv->video_fmt.bytesperline; + buf->vb.width = vv->video_fmt.width; + buf->vb.height = vv->video_fmt.height; + buf->vb.size = size; + buf->vb.field = field; + buf->fmt = &vv->video_fmt; + buf->vb.field = vv->video_fmt.field; + + sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); + + release_all_pagetables(dev, buf); + if( 0 != IS_PLANAR(sfmt->trans)) { + saa7146_pgtable_alloc(dev->pci, &buf->pt[0]); + saa7146_pgtable_alloc(dev->pci, &buf->pt[1]); + saa7146_pgtable_alloc(dev->pci, &buf->pt[2]); + } else { + saa7146_pgtable_alloc(dev->pci, &buf->pt[0]); + } + + err = videobuf_iolock(q,&buf->vb, &vv->ov_fb); + if (err) + goto oops; + err = saa7146_pgtable_build(dev,buf); + if (err) + goto oops; + } + buf->vb.state = VIDEOBUF_PREPARED; + buf->activate = buffer_activate; + + return 0; + + oops: + DEB_D("error out\n"); + saa7146_dma_free(dev,q,buf); + + return err; +} + +static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + struct file *file = q->priv_data; + struct saa7146_fh *fh = file->private_data; + struct saa7146_vv *vv = fh->dev->vv_data; + + if (0 == *count || *count > MAX_SAA7146_CAPTURE_BUFFERS) + *count = MAX_SAA7146_CAPTURE_BUFFERS; + + *size = vv->video_fmt.sizeimage; + + /* check if we exceed the "max_memory" parameter */ + if( (*count * *size) > (max_memory*1048576) ) { + *count = (max_memory*1048576) / *size; + } + + DEB_CAP("%d buffers, %d bytes each\n", *count, *size); + + return 0; +} + +static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct file *file = q->priv_data; + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_buf *buf = (struct saa7146_buf *)vb; + + DEB_CAP("vbuf:%p\n", vb); + saa7146_buffer_queue(fh->dev, &vv->video_dmaq, buf); +} + +static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct file *file = q->priv_data; + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct saa7146_buf *buf = (struct saa7146_buf *)vb; + + DEB_CAP("vbuf:%p\n", vb); + + saa7146_dma_free(dev,q,buf); + + release_all_pagetables(dev, buf); +} + +static struct videobuf_queue_ops video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/********************************************************************************/ +/* file operations */ + +static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv) +{ + INIT_LIST_HEAD(&vv->video_dmaq.queue); + + init_timer(&vv->video_dmaq.timeout); + vv->video_dmaq.timeout.function = saa7146_buffer_timeout; + vv->video_dmaq.timeout.data = (unsigned long)(&vv->video_dmaq); + vv->video_dmaq.dev = dev; + + /* set some default values */ + vv->standard = &dev->ext_vv_data->stds[0]; + + /* FIXME: what's this? */ + vv->current_hps_source = SAA7146_HPS_SOURCE_PORT_A; + vv->current_hps_sync = SAA7146_HPS_SYNC_PORT_A; +} + + +static int video_open(struct saa7146_dev *dev, struct file *file) +{ + struct saa7146_fh *fh = file->private_data; + + videobuf_queue_sg_init(&fh->video_q, &video_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct saa7146_buf), + file, &dev->v4l2_lock); + + return 0; +} + + +static void video_close(struct saa7146_dev *dev, struct file *file) +{ + struct saa7146_fh *fh = file->private_data; + struct saa7146_vv *vv = dev->vv_data; + struct videobuf_queue *q = &fh->video_q; + + if (IS_CAPTURE_ACTIVE(fh) != 0) + video_end(fh, file); + else if (IS_OVERLAY_ACTIVE(fh) != 0) + saa7146_stop_preview(fh); + + videobuf_stop(q); + /* hmm, why is this function declared void? */ +} + + +static void video_irq_done(struct saa7146_dev *dev, unsigned long st) +{ + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_dmaqueue *q = &vv->video_dmaq; + + spin_lock(&dev->slock); + DEB_CAP("called\n"); + + /* only finish the buffer if we have one... */ + if( NULL != q->curr ) { + saa7146_buffer_finish(dev,q,VIDEOBUF_DONE); + } + saa7146_buffer_next(dev,q,0); + + spin_unlock(&dev->slock); +} + +static ssize_t video_read(struct file *file, char __user *data, size_t count, loff_t *ppos) +{ + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + ssize_t ret = 0; + + DEB_EE("called\n"); + + if ((vv->video_status & STATUS_CAPTURE) != 0) { + /* fixme: should we allow read() captures while streaming capture? */ + if (vv->video_fh == fh) { + DEB_S("already capturing\n"); + return -EBUSY; + } + DEB_S("already capturing in another open\n"); + return -EBUSY; + } + + ret = video_begin(fh); + if( 0 != ret) { + goto out; + } + + ret = videobuf_read_one(&fh->video_q , data, count, ppos, + file->f_flags & O_NONBLOCK); + if (ret != 0) { + video_end(fh, file); + } else { + ret = video_end(fh, file); + } +out: + /* restart overlay if it was active before */ + if (vv->ov_suspend != NULL) { + saa7146_start_preview(vv->ov_suspend); + vv->ov_suspend = NULL; + } + + return ret; +} + +struct saa7146_use_ops saa7146_video_uops = { + .init = video_init, + .open = video_open, + .release = video_close, + .irq_done = video_irq_done, + .read = video_read, +}; diff --git a/drivers/media/common/siano/Kconfig b/drivers/media/common/siano/Kconfig new file mode 100644 index 00000000..f3f5ec44 --- /dev/null +++ b/drivers/media/common/siano/Kconfig @@ -0,0 +1,31 @@ +# +# Siano Mobile Silicon Digital TV device configuration +# + +config SMS_SIANO_MDTV + tristate + depends on DVB_CORE && HAS_DMA + depends on !RC_CORE || RC_CORE + depends on SMS_USB_DRV || SMS_SDIO_DRV + default y + +config SMS_SIANO_RC + bool "Enable Remote Controller support for Siano devices" + depends on SMS_SIANO_MDTV && RC_CORE + depends on SMS_USB_DRV || SMS_SDIO_DRV + depends on MEDIA_COMMON_OPTIONS + default y + ---help--- + Choose Y to select Remote Controller support for Siano driver. + +config SMS_SIANO_DEBUGFS + bool "Enable debugfs for smsdvb" + depends on SMS_SIANO_MDTV + depends on DEBUG_FS + depends on SMS_USB_DRV + ---help--- + Choose Y to enable visualizing a dump of the frontend + statistics response packets via debugfs. Currently, works + only with Siano USB devices. + + Useful only for developers. In doubt, say N. diff --git a/drivers/media/common/siano/Makefile b/drivers/media/common/siano/Makefile new file mode 100644 index 00000000..4c0567f1 --- /dev/null +++ b/drivers/media/common/siano/Makefile @@ -0,0 +1,16 @@ +smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o +smsdvb-objs := smsdvb-main.o + +obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o + +ifeq ($(CONFIG_SMS_SIANO_RC),y) + smsmdtv-objs += smsir.o +endif + +ifeq ($(CONFIG_SMS_SIANO_DEBUGFS),y) + smsdvb-objs += smsdvb-debugfs.o +endif + +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += $(extra-cflags-y) $(extra-cflags-m) + diff --git a/drivers/media/common/siano/sms-cards.c b/drivers/media/common/siano/sms-cards.c new file mode 100644 index 00000000..82769993 --- /dev/null +++ b/drivers/media/common/siano/sms-cards.c @@ -0,0 +1,358 @@ +/* + * Card-specific functions for the Siano SMS1xxx USB dongle + * + * Copyright (c) 2008 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "sms-cards.h" +#include "smsir.h" +#include + +static int sms_dbg; +module_param_named(cards_dbg, sms_dbg, int, 0644); +MODULE_PARM_DESC(cards_dbg, "set debug level (info=1, adv=2 (or-able))"); + +static struct sms_board sms_boards[] = { + [SMS_BOARD_UNKNOWN] = { + .name = "Unknown board", + .type = SMS_UNKNOWN_TYPE, + .default_mode = DEVICE_MODE_NONE, + }, + [SMS1XXX_BOARD_SIANO_STELLAR] = { + .name = "Siano Stellar Digital Receiver", + .type = SMS_STELLAR, + .default_mode = DEVICE_MODE_DVBT_BDA, + }, + [SMS1XXX_BOARD_SIANO_NOVA_A] = { + .name = "Siano Nova A Digital Receiver", + .type = SMS_NOVA_A0, + .default_mode = DEVICE_MODE_DVBT_BDA, + }, + [SMS1XXX_BOARD_SIANO_NOVA_B] = { + .name = "Siano Nova B Digital Receiver", + .type = SMS_NOVA_B0, + .default_mode = DEVICE_MODE_DVBT_BDA, + }, + [SMS1XXX_BOARD_SIANO_VEGA] = { + .name = "Siano Vega Digital Receiver", + .type = SMS_VEGA, + .default_mode = DEVICE_MODE_CMMB, + }, + [SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT] = { + .name = "Hauppauge Catamount", + .type = SMS_STELLAR, + .fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_STELLAR, + .default_mode = DEVICE_MODE_DVBT_BDA, + }, + [SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A] = { + .name = "Hauppauge Okemo-A", + .type = SMS_NOVA_A0, + .fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_NOVA_A, + .default_mode = DEVICE_MODE_DVBT_BDA, + }, + [SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B] = { + .name = "Hauppauge Okemo-B", + .type = SMS_NOVA_B0, + .fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_NOVA_B, + .default_mode = DEVICE_MODE_DVBT_BDA, + }, + [SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = { + .name = "Hauppauge WinTV MiniStick", + .type = SMS_NOVA_B0, + .fw[DEVICE_MODE_ISDBT_BDA] = SMS_FW_ISDBT_HCW_55XXX, + .fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX, + .default_mode = DEVICE_MODE_DVBT_BDA, + .rc_codes = RC_MAP_HAUPPAUGE, + .board_cfg.leds_power = 26, + .board_cfg.led0 = 27, + .board_cfg.led1 = 28, + .board_cfg.ir = 9, + .led_power = 26, + .led_lo = 27, + .led_hi = 28, + }, + [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = { + .name = "Hauppauge WinTV MiniCard", + .type = SMS_NOVA_B0, + .fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX, + .default_mode = DEVICE_MODE_DVBT_BDA, + .lna_ctrl = 29, + .board_cfg.foreign_lna0_ctrl = 29, + .rf_switch = 17, + .board_cfg.rf_switch_uhf = 17, + }, + [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = { + .name = "Hauppauge WinTV MiniCard", + .type = SMS_NOVA_B0, + .fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX, + .default_mode = DEVICE_MODE_DVBT_BDA, + .lna_ctrl = -1, + }, + [SMS1XXX_BOARD_SIANO_NICE] = { + .name = "Siano Nice Digital Receiver", + .type = SMS_NOVA_B0, + .default_mode = DEVICE_MODE_DVBT_BDA, + }, + [SMS1XXX_BOARD_SIANO_VENICE] = { + .name = "Siano Venice Digital Receiver", + .type = SMS_VEGA, + .default_mode = DEVICE_MODE_CMMB, + }, + [SMS1XXX_BOARD_SIANO_STELLAR_ROM] = { + .name = "Siano Stellar Digital Receiver ROM", + .type = SMS_STELLAR, + .default_mode = DEVICE_MODE_DVBT_BDA, + .intf_num = 1, + }, + [SMS1XXX_BOARD_ZTE_DVB_DATA_CARD] = { + .name = "ZTE Data Card Digital Receiver", + .type = SMS_NOVA_B0, + .default_mode = DEVICE_MODE_DVBT_BDA, + .intf_num = 5, + .mtu = 15792, + }, + [SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD] = { + .name = "ONDA Data Card Digital Receiver", + .type = SMS_NOVA_B0, + .default_mode = DEVICE_MODE_DVBT_BDA, + .intf_num = 6, + .mtu = 15792, + }, + [SMS1XXX_BOARD_SIANO_MING] = { + .name = "Siano Ming Digital Receiver", + .type = SMS_MING, + .default_mode = DEVICE_MODE_CMMB, + }, + [SMS1XXX_BOARD_SIANO_PELE] = { + .name = "Siano Pele Digital Receiver", + .type = SMS_PELE, + .default_mode = DEVICE_MODE_ISDBT_BDA, + }, + [SMS1XXX_BOARD_SIANO_RIO] = { + .name = "Siano Rio Digital Receiver", + .type = SMS_RIO, + .default_mode = DEVICE_MODE_ISDBT_BDA, + }, + [SMS1XXX_BOARD_SIANO_DENVER_1530] = { + .name = "Siano Denver (ATSC-M/H) Digital Receiver", + .type = SMS_DENVER_1530, + .default_mode = DEVICE_MODE_ATSC, + .crystal = 2400, + }, + [SMS1XXX_BOARD_SIANO_DENVER_2160] = { + .name = "Siano Denver (TDMB) Digital Receiver", + .type = SMS_DENVER_2160, + .default_mode = DEVICE_MODE_DAB_TDMB, + }, +}; + +struct sms_board *sms_get_board(unsigned id) +{ + BUG_ON(id >= ARRAY_SIZE(sms_boards)); + + return &sms_boards[id]; +} +EXPORT_SYMBOL_GPL(sms_get_board); +static inline void sms_gpio_assign_11xx_default_led_config( + struct smscore_config_gpio *p_gpio_config) { + p_gpio_config->direction = SMS_GPIO_DIRECTION_OUTPUT; + p_gpio_config->inputcharacteristics = + SMS_GPIO_INPUTCHARACTERISTICS_NORMAL; + p_gpio_config->outputdriving = SMS_GPIO_OUTPUTDRIVING_4mA; + p_gpio_config->outputslewrate = SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS; + p_gpio_config->pullupdown = SMS_GPIO_PULLUPDOWN_NONE; +} + +int sms_board_event(struct smscore_device_t *coredev, + enum SMS_BOARD_EVENTS gevent) +{ + struct smscore_config_gpio my_gpio_config; + + sms_gpio_assign_11xx_default_led_config(&my_gpio_config); + + switch (gevent) { + case BOARD_EVENT_POWER_INIT: /* including hotplug */ + break; /* BOARD_EVENT_BIND */ + + case BOARD_EVENT_POWER_SUSPEND: + break; /* BOARD_EVENT_POWER_SUSPEND */ + + case BOARD_EVENT_POWER_RESUME: + break; /* BOARD_EVENT_POWER_RESUME */ + + case BOARD_EVENT_BIND: + break; /* BOARD_EVENT_BIND */ + + case BOARD_EVENT_SCAN_PROG: + break; /* BOARD_EVENT_SCAN_PROG */ + case BOARD_EVENT_SCAN_COMP: + break; /* BOARD_EVENT_SCAN_COMP */ + case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL: + break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */ + case BOARD_EVENT_FE_LOCK: + break; /* BOARD_EVENT_FE_LOCK */ + case BOARD_EVENT_FE_UNLOCK: + break; /* BOARD_EVENT_FE_UNLOCK */ + case BOARD_EVENT_DEMOD_LOCK: + break; /* BOARD_EVENT_DEMOD_LOCK */ + case BOARD_EVENT_DEMOD_UNLOCK: + break; /* BOARD_EVENT_DEMOD_UNLOCK */ + case BOARD_EVENT_RECEPTION_MAX_4: + break; /* BOARD_EVENT_RECEPTION_MAX_4 */ + case BOARD_EVENT_RECEPTION_3: + break; /* BOARD_EVENT_RECEPTION_3 */ + case BOARD_EVENT_RECEPTION_2: + break; /* BOARD_EVENT_RECEPTION_2 */ + case BOARD_EVENT_RECEPTION_1: + break; /* BOARD_EVENT_RECEPTION_1 */ + case BOARD_EVENT_RECEPTION_LOST_0: + break; /* BOARD_EVENT_RECEPTION_LOST_0 */ + case BOARD_EVENT_MULTIPLEX_OK: + break; /* BOARD_EVENT_MULTIPLEX_OK */ + case BOARD_EVENT_MULTIPLEX_ERRORS: + break; /* BOARD_EVENT_MULTIPLEX_ERRORS */ + + default: + sms_err("Unknown SMS board event"); + break; + } + return 0; +} +EXPORT_SYMBOL_GPL(sms_board_event); + +static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable) +{ + int lvl, ret; + u32 gpio; + struct smscore_config_gpio gpioconfig = { + .direction = SMS_GPIO_DIRECTION_OUTPUT, + .pullupdown = SMS_GPIO_PULLUPDOWN_NONE, + .inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL, + .outputslewrate = SMS_GPIO_OUTPUT_SLEW_RATE_FAST, + .outputdriving = SMS_GPIO_OUTPUTDRIVING_S_4mA, + }; + + if (pin == 0) + return -EINVAL; + + if (pin < 0) { + /* inverted gpio */ + gpio = pin * -1; + lvl = enable ? 0 : 1; + } else { + gpio = pin; + lvl = enable ? 1 : 0; + } + + ret = smscore_configure_gpio(coredev, gpio, &gpioconfig); + if (ret < 0) + return ret; + + return smscore_set_gpio(coredev, gpio, lvl); +} + +int sms_board_setup(struct smscore_device_t *coredev) +{ + int board_id = smscore_get_board_id(coredev); + struct sms_board *board = sms_get_board(board_id); + + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + /* turn off all LEDs */ + sms_set_gpio(coredev, board->led_power, 0); + sms_set_gpio(coredev, board->led_hi, 0); + sms_set_gpio(coredev, board->led_lo, 0); + break; + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: + /* turn off LNA */ + sms_set_gpio(coredev, board->lna_ctrl, 0); + break; + } + return 0; +} +EXPORT_SYMBOL_GPL(sms_board_setup); + +int sms_board_power(struct smscore_device_t *coredev, int onoff) +{ + int board_id = smscore_get_board_id(coredev); + struct sms_board *board = sms_get_board(board_id); + + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + /* power LED */ + sms_set_gpio(coredev, + board->led_power, onoff ? 1 : 0); + break; + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: + /* LNA */ + if (!onoff) + sms_set_gpio(coredev, board->lna_ctrl, 0); + break; + } + return 0; +} +EXPORT_SYMBOL_GPL(sms_board_power); + +int sms_board_led_feedback(struct smscore_device_t *coredev, int led) +{ + int board_id = smscore_get_board_id(coredev); + struct sms_board *board = sms_get_board(board_id); + + /* dont touch GPIO if LEDs are already set */ + if (smscore_led_state(coredev, -1) == led) + return 0; + + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + sms_set_gpio(coredev, + board->led_lo, (led & SMS_LED_LO) ? 1 : 0); + sms_set_gpio(coredev, + board->led_hi, (led & SMS_LED_HI) ? 1 : 0); + + smscore_led_state(coredev, led); + break; + } + return 0; +} +EXPORT_SYMBOL_GPL(sms_board_led_feedback); + +int sms_board_lna_control(struct smscore_device_t *coredev, int onoff) +{ + int board_id = smscore_get_board_id(coredev); + struct sms_board *board = sms_get_board(board_id); + + sms_debug("%s: LNA %s", __func__, onoff ? "enabled" : "disabled"); + + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: + sms_set_gpio(coredev, + board->rf_switch, onoff ? 1 : 0); + return sms_set_gpio(coredev, + board->lna_ctrl, onoff ? 1 : 0); + } + return -EINVAL; +} +EXPORT_SYMBOL_GPL(sms_board_lna_control); + +int sms_board_load_modules(int id) +{ + request_module("smsdvb"); + return 0; +} +EXPORT_SYMBOL_GPL(sms_board_load_modules); diff --git a/drivers/media/common/siano/sms-cards.h b/drivers/media/common/siano/sms-cards.h new file mode 100644 index 00000000..c63b544c --- /dev/null +++ b/drivers/media/common/siano/sms-cards.h @@ -0,0 +1,137 @@ +/* + * Card-specific functions for the Siano SMS1xxx USB dongle + * + * Copyright (c) 2008 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __SMS_CARDS_H__ +#define __SMS_CARDS_H__ + +#include +#include "smscoreapi.h" +#include "smsir.h" + +#define SMS_BOARD_UNKNOWN 0 +#define SMS1XXX_BOARD_SIANO_STELLAR 1 +#define SMS1XXX_BOARD_SIANO_NOVA_A 2 +#define SMS1XXX_BOARD_SIANO_NOVA_B 3 +#define SMS1XXX_BOARD_SIANO_VEGA 4 +#define SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT 5 +#define SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A 6 +#define SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B 7 +#define SMS1XXX_BOARD_HAUPPAUGE_WINDHAM 8 +#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD 9 +#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10 +#define SMS1XXX_BOARD_SIANO_NICE 11 +#define SMS1XXX_BOARD_SIANO_VENICE 12 +#define SMS1XXX_BOARD_SIANO_STELLAR_ROM 13 +#define SMS1XXX_BOARD_ZTE_DVB_DATA_CARD 14 +#define SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD 15 +#define SMS1XXX_BOARD_SIANO_MING 16 +#define SMS1XXX_BOARD_SIANO_PELE 17 +#define SMS1XXX_BOARD_SIANO_RIO 18 +#define SMS1XXX_BOARD_SIANO_DENVER_1530 19 +#define SMS1XXX_BOARD_SIANO_DENVER_2160 20 + +struct sms_board_gpio_cfg { + int lna_vhf_exist; + int lna_vhf_ctrl; + int lna_uhf_exist; + int lna_uhf_ctrl; + int lna_uhf_d_ctrl; + int lna_sband_exist; + int lna_sband_ctrl; + int lna_sband_d_ctrl; + int foreign_lna0_ctrl; + int foreign_lna1_ctrl; + int foreign_lna2_ctrl; + int rf_switch_vhf; + int rf_switch_uhf; + int rf_switch_sband; + int leds_power; + int led0; + int led1; + int led2; + int led3; + int led4; + int ir; + int eeprom_wp; + int mrc_sense; + int mrc_pdn_resetn; + int mrc_gp0; /* mrcs spi int */ + int mrc_gp1; + int mrc_gp2; + int mrc_gp3; + int mrc_gp4; + int host_spi_gsp_ts_int; +}; + +struct sms_board { + enum sms_device_type_st type; + char *name, *fw[DEVICE_MODE_MAX]; + struct sms_board_gpio_cfg board_cfg; + char *rc_codes; /* Name of IR codes table */ + + /* gpios */ + int led_power, led_hi, led_lo, lna_ctrl, rf_switch; + + char intf_num; + int default_mode; + unsigned int mtu; + unsigned int crystal; + struct sms_antenna_config_ST *antenna_config; +}; + +struct sms_board *sms_get_board(unsigned id); + +extern struct smscore_device_t *coredev; + +enum SMS_BOARD_EVENTS { + BOARD_EVENT_POWER_INIT, + BOARD_EVENT_POWER_SUSPEND, + BOARD_EVENT_POWER_RESUME, + BOARD_EVENT_BIND, + BOARD_EVENT_SCAN_PROG, + BOARD_EVENT_SCAN_COMP, + BOARD_EVENT_EMERGENCY_WARNING_SIGNAL, + BOARD_EVENT_FE_LOCK, + BOARD_EVENT_FE_UNLOCK, + BOARD_EVENT_DEMOD_LOCK, + BOARD_EVENT_DEMOD_UNLOCK, + BOARD_EVENT_RECEPTION_MAX_4, + BOARD_EVENT_RECEPTION_3, + BOARD_EVENT_RECEPTION_2, + BOARD_EVENT_RECEPTION_1, + BOARD_EVENT_RECEPTION_LOST_0, + BOARD_EVENT_MULTIPLEX_OK, + BOARD_EVENT_MULTIPLEX_ERRORS +}; + +int sms_board_event(struct smscore_device_t *coredev, + enum SMS_BOARD_EVENTS gevent); + +int sms_board_setup(struct smscore_device_t *coredev); + +#define SMS_LED_OFF 0 +#define SMS_LED_LO 1 +#define SMS_LED_HI 2 +int sms_board_led_feedback(struct smscore_device_t *coredev, int led); +int sms_board_power(struct smscore_device_t *coredev, int onoff); +int sms_board_lna_control(struct smscore_device_t *coredev, int onoff); + +extern int sms_board_load_modules(int id); + +#endif /* __SMS_CARDS_H__ */ diff --git a/drivers/media/common/siano/smscoreapi.c b/drivers/media/common/siano/smscoreapi.c new file mode 100644 index 00000000..45ac9eea --- /dev/null +++ b/drivers/media/common/siano/smscoreapi.c @@ -0,0 +1,2199 @@ +/* + * Siano core API module + * + * This file contains implementation for the interface to sms core component + * + * author: Uri Shkolnik + * + * Copyright (c), 2005-2008 Siano Mobile Silicon, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "smscoreapi.h" +#include "sms-cards.h" +#include "smsir.h" + +static int sms_dbg; +module_param_named(debug, sms_dbg, int, 0644); +MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))"); + +struct smscore_device_notifyee_t { + struct list_head entry; + hotplug_t hotplug; +}; + +struct smscore_idlist_t { + struct list_head entry; + int id; + int data_type; +}; + +struct smscore_client_t { + struct list_head entry; + struct smscore_device_t *coredev; + void *context; + struct list_head idlist; + onresponse_t onresponse_handler; + onremove_t onremove_handler; +}; + +static char *siano_msgs[] = { + [MSG_TYPE_BASE_VAL - MSG_TYPE_BASE_VAL] = "MSG_TYPE_BASE_VAL", + [MSG_SMS_GET_VERSION_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_VERSION_REQ", + [MSG_SMS_GET_VERSION_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_VERSION_RES", + [MSG_SMS_MULTI_BRIDGE_CFG - MSG_TYPE_BASE_VAL] = "MSG_SMS_MULTI_BRIDGE_CFG", + [MSG_SMS_GPIO_CONFIG_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GPIO_CONFIG_REQ", + [MSG_SMS_GPIO_CONFIG_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GPIO_CONFIG_RES", + [MSG_SMS_GPIO_SET_LEVEL_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GPIO_SET_LEVEL_REQ", + [MSG_SMS_GPIO_SET_LEVEL_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GPIO_SET_LEVEL_RES", + [MSG_SMS_GPIO_GET_LEVEL_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GPIO_GET_LEVEL_REQ", + [MSG_SMS_GPIO_GET_LEVEL_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GPIO_GET_LEVEL_RES", + [MSG_SMS_EEPROM_BURN_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_EEPROM_BURN_IND", + [MSG_SMS_LOG_ENABLE_CHANGE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_LOG_ENABLE_CHANGE_REQ", + [MSG_SMS_LOG_ENABLE_CHANGE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_LOG_ENABLE_CHANGE_RES", + [MSG_SMS_SET_MAX_TX_MSG_LEN_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_MAX_TX_MSG_LEN_REQ", + [MSG_SMS_SET_MAX_TX_MSG_LEN_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_MAX_TX_MSG_LEN_RES", + [MSG_SMS_SPI_HALFDUPLEX_TOKEN_HOST_TO_DEVICE - MSG_TYPE_BASE_VAL] = "MSG_SMS_SPI_HALFDUPLEX_TOKEN_HOST_TO_DEVICE", + [MSG_SMS_SPI_HALFDUPLEX_TOKEN_DEVICE_TO_HOST - MSG_TYPE_BASE_VAL] = "MSG_SMS_SPI_HALFDUPLEX_TOKEN_DEVICE_TO_HOST", + [MSG_SMS_BACKGROUND_SCAN_FLAG_CHANGE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_BACKGROUND_SCAN_FLAG_CHANGE_REQ", + [MSG_SMS_BACKGROUND_SCAN_FLAG_CHANGE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_BACKGROUND_SCAN_FLAG_CHANGE_RES", + [MSG_SMS_BACKGROUND_SCAN_SIGNAL_DETECTED_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_BACKGROUND_SCAN_SIGNAL_DETECTED_IND", + [MSG_SMS_BACKGROUND_SCAN_NO_SIGNAL_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_BACKGROUND_SCAN_NO_SIGNAL_IND", + [MSG_SMS_CONFIGURE_RF_SWITCH_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CONFIGURE_RF_SWITCH_REQ", + [MSG_SMS_CONFIGURE_RF_SWITCH_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CONFIGURE_RF_SWITCH_RES", + [MSG_SMS_MRC_PATH_DISCONNECT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MRC_PATH_DISCONNECT_REQ", + [MSG_SMS_MRC_PATH_DISCONNECT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_MRC_PATH_DISCONNECT_RES", + [MSG_SMS_RECEIVE_1SEG_THROUGH_FULLSEG_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_RECEIVE_1SEG_THROUGH_FULLSEG_REQ", + [MSG_SMS_RECEIVE_1SEG_THROUGH_FULLSEG_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_RECEIVE_1SEG_THROUGH_FULLSEG_RES", + [MSG_SMS_RECEIVE_VHF_VIA_VHF_INPUT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_RECEIVE_VHF_VIA_VHF_INPUT_REQ", + [MSG_SMS_RECEIVE_VHF_VIA_VHF_INPUT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_RECEIVE_VHF_VIA_VHF_INPUT_RES", + [MSG_WR_REG_RFT_REQ - MSG_TYPE_BASE_VAL] = "MSG_WR_REG_RFT_REQ", + [MSG_WR_REG_RFT_RES - MSG_TYPE_BASE_VAL] = "MSG_WR_REG_RFT_RES", + [MSG_RD_REG_RFT_REQ - MSG_TYPE_BASE_VAL] = "MSG_RD_REG_RFT_REQ", + [MSG_RD_REG_RFT_RES - MSG_TYPE_BASE_VAL] = "MSG_RD_REG_RFT_RES", + [MSG_RD_REG_ALL_RFT_REQ - MSG_TYPE_BASE_VAL] = "MSG_RD_REG_ALL_RFT_REQ", + [MSG_RD_REG_ALL_RFT_RES - MSG_TYPE_BASE_VAL] = "MSG_RD_REG_ALL_RFT_RES", + [MSG_HELP_INT - MSG_TYPE_BASE_VAL] = "MSG_HELP_INT", + [MSG_RUN_SCRIPT_INT - MSG_TYPE_BASE_VAL] = "MSG_RUN_SCRIPT_INT", + [MSG_SMS_EWS_INBAND_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_EWS_INBAND_REQ", + [MSG_SMS_EWS_INBAND_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_EWS_INBAND_RES", + [MSG_SMS_RFS_SELECT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_RFS_SELECT_REQ", + [MSG_SMS_RFS_SELECT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_RFS_SELECT_RES", + [MSG_SMS_MB_GET_VER_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MB_GET_VER_REQ", + [MSG_SMS_MB_GET_VER_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_MB_GET_VER_RES", + [MSG_SMS_MB_WRITE_CFGFILE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MB_WRITE_CFGFILE_REQ", + [MSG_SMS_MB_WRITE_CFGFILE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_MB_WRITE_CFGFILE_RES", + [MSG_SMS_MB_READ_CFGFILE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MB_READ_CFGFILE_REQ", + [MSG_SMS_MB_READ_CFGFILE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_MB_READ_CFGFILE_RES", + [MSG_SMS_RD_MEM_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_RD_MEM_REQ", + [MSG_SMS_RD_MEM_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_RD_MEM_RES", + [MSG_SMS_WR_MEM_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_WR_MEM_REQ", + [MSG_SMS_WR_MEM_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_WR_MEM_RES", + [MSG_SMS_UPDATE_MEM_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_UPDATE_MEM_REQ", + [MSG_SMS_UPDATE_MEM_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_UPDATE_MEM_RES", + [MSG_SMS_ISDBT_ENABLE_FULL_PARAMS_SET_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ISDBT_ENABLE_FULL_PARAMS_SET_REQ", + [MSG_SMS_ISDBT_ENABLE_FULL_PARAMS_SET_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ISDBT_ENABLE_FULL_PARAMS_SET_RES", + [MSG_SMS_RF_TUNE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_RF_TUNE_REQ", + [MSG_SMS_RF_TUNE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_RF_TUNE_RES", + [MSG_SMS_ISDBT_ENABLE_HIGH_MOBILITY_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ISDBT_ENABLE_HIGH_MOBILITY_REQ", + [MSG_SMS_ISDBT_ENABLE_HIGH_MOBILITY_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ISDBT_ENABLE_HIGH_MOBILITY_RES", + [MSG_SMS_ISDBT_SB_RECEPTION_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ISDBT_SB_RECEPTION_REQ", + [MSG_SMS_ISDBT_SB_RECEPTION_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ISDBT_SB_RECEPTION_RES", + [MSG_SMS_GENERIC_EPROM_WRITE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GENERIC_EPROM_WRITE_REQ", + [MSG_SMS_GENERIC_EPROM_WRITE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GENERIC_EPROM_WRITE_RES", + [MSG_SMS_GENERIC_EPROM_READ_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GENERIC_EPROM_READ_REQ", + [MSG_SMS_GENERIC_EPROM_READ_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GENERIC_EPROM_READ_RES", + [MSG_SMS_EEPROM_WRITE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_EEPROM_WRITE_REQ", + [MSG_SMS_EEPROM_WRITE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_EEPROM_WRITE_RES", + [MSG_SMS_CUSTOM_READ_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CUSTOM_READ_REQ", + [MSG_SMS_CUSTOM_READ_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CUSTOM_READ_RES", + [MSG_SMS_CUSTOM_WRITE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CUSTOM_WRITE_REQ", + [MSG_SMS_CUSTOM_WRITE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CUSTOM_WRITE_RES", + [MSG_SMS_INIT_DEVICE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_INIT_DEVICE_REQ", + [MSG_SMS_INIT_DEVICE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_INIT_DEVICE_RES", + [MSG_SMS_ATSC_SET_ALL_IP_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_SET_ALL_IP_REQ", + [MSG_SMS_ATSC_SET_ALL_IP_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_SET_ALL_IP_RES", + [MSG_SMS_ATSC_START_ENSEMBLE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_START_ENSEMBLE_REQ", + [MSG_SMS_ATSC_START_ENSEMBLE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_START_ENSEMBLE_RES", + [MSG_SMS_SET_OUTPUT_MODE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_OUTPUT_MODE_REQ", + [MSG_SMS_SET_OUTPUT_MODE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_OUTPUT_MODE_RES", + [MSG_SMS_ATSC_IP_FILTER_GET_LIST_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_IP_FILTER_GET_LIST_REQ", + [MSG_SMS_ATSC_IP_FILTER_GET_LIST_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_IP_FILTER_GET_LIST_RES", + [MSG_SMS_SUB_CHANNEL_START_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SUB_CHANNEL_START_REQ", + [MSG_SMS_SUB_CHANNEL_START_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SUB_CHANNEL_START_RES", + [MSG_SMS_SUB_CHANNEL_STOP_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SUB_CHANNEL_STOP_REQ", + [MSG_SMS_SUB_CHANNEL_STOP_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SUB_CHANNEL_STOP_RES", + [MSG_SMS_ATSC_IP_FILTER_ADD_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_IP_FILTER_ADD_REQ", + [MSG_SMS_ATSC_IP_FILTER_ADD_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_IP_FILTER_ADD_RES", + [MSG_SMS_ATSC_IP_FILTER_REMOVE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_IP_FILTER_REMOVE_REQ", + [MSG_SMS_ATSC_IP_FILTER_REMOVE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_IP_FILTER_REMOVE_RES", + [MSG_SMS_ATSC_IP_FILTER_REMOVE_ALL_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_IP_FILTER_REMOVE_ALL_REQ", + [MSG_SMS_ATSC_IP_FILTER_REMOVE_ALL_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_IP_FILTER_REMOVE_ALL_RES", + [MSG_SMS_WAIT_CMD - MSG_TYPE_BASE_VAL] = "MSG_SMS_WAIT_CMD", + [MSG_SMS_ADD_PID_FILTER_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ADD_PID_FILTER_REQ", + [MSG_SMS_ADD_PID_FILTER_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ADD_PID_FILTER_RES", + [MSG_SMS_REMOVE_PID_FILTER_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_REMOVE_PID_FILTER_REQ", + [MSG_SMS_REMOVE_PID_FILTER_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_REMOVE_PID_FILTER_RES", + [MSG_SMS_FAST_INFORMATION_CHANNEL_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_FAST_INFORMATION_CHANNEL_REQ", + [MSG_SMS_FAST_INFORMATION_CHANNEL_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_FAST_INFORMATION_CHANNEL_RES", + [MSG_SMS_DAB_CHANNEL - MSG_TYPE_BASE_VAL] = "MSG_SMS_DAB_CHANNEL", + [MSG_SMS_GET_PID_FILTER_LIST_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_PID_FILTER_LIST_REQ", + [MSG_SMS_GET_PID_FILTER_LIST_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_PID_FILTER_LIST_RES", + [MSG_SMS_POWER_DOWN_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_POWER_DOWN_REQ", + [MSG_SMS_POWER_DOWN_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_POWER_DOWN_RES", + [MSG_SMS_ATSC_SLT_EXIST_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_SLT_EXIST_IND", + [MSG_SMS_ATSC_NO_SLT_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_ATSC_NO_SLT_IND", + [MSG_SMS_GET_STATISTICS_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_STATISTICS_REQ", + [MSG_SMS_GET_STATISTICS_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_STATISTICS_RES", + [MSG_SMS_SEND_DUMP - MSG_TYPE_BASE_VAL] = "MSG_SMS_SEND_DUMP", + [MSG_SMS_SCAN_START_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SCAN_START_REQ", + [MSG_SMS_SCAN_START_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SCAN_START_RES", + [MSG_SMS_SCAN_STOP_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SCAN_STOP_REQ", + [MSG_SMS_SCAN_STOP_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SCAN_STOP_RES", + [MSG_SMS_SCAN_PROGRESS_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_SCAN_PROGRESS_IND", + [MSG_SMS_SCAN_COMPLETE_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_SCAN_COMPLETE_IND", + [MSG_SMS_LOG_ITEM - MSG_TYPE_BASE_VAL] = "MSG_SMS_LOG_ITEM", + [MSG_SMS_DAB_SUBCHANNEL_RECONFIG_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DAB_SUBCHANNEL_RECONFIG_REQ", + [MSG_SMS_DAB_SUBCHANNEL_RECONFIG_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DAB_SUBCHANNEL_RECONFIG_RES", + [MSG_SMS_HO_PER_SLICES_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_PER_SLICES_IND", + [MSG_SMS_HO_INBAND_POWER_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_INBAND_POWER_IND", + [MSG_SMS_MANUAL_DEMOD_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MANUAL_DEMOD_REQ", + [MSG_SMS_HO_TUNE_ON_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_TUNE_ON_REQ", + [MSG_SMS_HO_TUNE_ON_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_TUNE_ON_RES", + [MSG_SMS_HO_TUNE_OFF_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_TUNE_OFF_REQ", + [MSG_SMS_HO_TUNE_OFF_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_TUNE_OFF_RES", + [MSG_SMS_HO_PEEK_FREQ_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_PEEK_FREQ_REQ", + [MSG_SMS_HO_PEEK_FREQ_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_PEEK_FREQ_RES", + [MSG_SMS_HO_PEEK_FREQ_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_HO_PEEK_FREQ_IND", + [MSG_SMS_MB_ATTEN_SET_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MB_ATTEN_SET_REQ", + [MSG_SMS_MB_ATTEN_SET_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_MB_ATTEN_SET_RES", + [MSG_SMS_ENABLE_STAT_IN_I2C_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ENABLE_STAT_IN_I2C_REQ", + [MSG_SMS_ENABLE_STAT_IN_I2C_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ENABLE_STAT_IN_I2C_RES", + [MSG_SMS_SET_ANTENNA_CONFIG_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_ANTENNA_CONFIG_REQ", + [MSG_SMS_SET_ANTENNA_CONFIG_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_ANTENNA_CONFIG_RES", + [MSG_SMS_GET_STATISTICS_EX_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_STATISTICS_EX_REQ", + [MSG_SMS_GET_STATISTICS_EX_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_STATISTICS_EX_RES", + [MSG_SMS_SLEEP_RESUME_COMP_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_SLEEP_RESUME_COMP_IND", + [MSG_SMS_SWITCH_HOST_INTERFACE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SWITCH_HOST_INTERFACE_REQ", + [MSG_SMS_SWITCH_HOST_INTERFACE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SWITCH_HOST_INTERFACE_RES", + [MSG_SMS_DATA_DOWNLOAD_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DATA_DOWNLOAD_REQ", + [MSG_SMS_DATA_DOWNLOAD_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DATA_DOWNLOAD_RES", + [MSG_SMS_DATA_VALIDITY_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DATA_VALIDITY_REQ", + [MSG_SMS_DATA_VALIDITY_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DATA_VALIDITY_RES", + [MSG_SMS_SWDOWNLOAD_TRIGGER_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SWDOWNLOAD_TRIGGER_REQ", + [MSG_SMS_SWDOWNLOAD_TRIGGER_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SWDOWNLOAD_TRIGGER_RES", + [MSG_SMS_SWDOWNLOAD_BACKDOOR_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SWDOWNLOAD_BACKDOOR_REQ", + [MSG_SMS_SWDOWNLOAD_BACKDOOR_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SWDOWNLOAD_BACKDOOR_RES", + [MSG_SMS_GET_VERSION_EX_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_VERSION_EX_REQ", + [MSG_SMS_GET_VERSION_EX_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_VERSION_EX_RES", + [MSG_SMS_CLOCK_OUTPUT_CONFIG_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CLOCK_OUTPUT_CONFIG_REQ", + [MSG_SMS_CLOCK_OUTPUT_CONFIG_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CLOCK_OUTPUT_CONFIG_RES", + [MSG_SMS_I2C_SET_FREQ_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_I2C_SET_FREQ_REQ", + [MSG_SMS_I2C_SET_FREQ_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_I2C_SET_FREQ_RES", + [MSG_SMS_GENERIC_I2C_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GENERIC_I2C_REQ", + [MSG_SMS_GENERIC_I2C_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GENERIC_I2C_RES", + [MSG_SMS_DVBT_BDA_DATA - MSG_TYPE_BASE_VAL] = "MSG_SMS_DVBT_BDA_DATA", + [MSG_SW_RELOAD_REQ - MSG_TYPE_BASE_VAL] = "MSG_SW_RELOAD_REQ", + [MSG_SMS_DATA_MSG - MSG_TYPE_BASE_VAL] = "MSG_SMS_DATA_MSG", + [MSG_TABLE_UPLOAD_REQ - MSG_TYPE_BASE_VAL] = "MSG_TABLE_UPLOAD_REQ", + [MSG_TABLE_UPLOAD_RES - MSG_TYPE_BASE_VAL] = "MSG_TABLE_UPLOAD_RES", + [MSG_SW_RELOAD_START_REQ - MSG_TYPE_BASE_VAL] = "MSG_SW_RELOAD_START_REQ", + [MSG_SW_RELOAD_START_RES - MSG_TYPE_BASE_VAL] = "MSG_SW_RELOAD_START_RES", + [MSG_SW_RELOAD_EXEC_REQ - MSG_TYPE_BASE_VAL] = "MSG_SW_RELOAD_EXEC_REQ", + [MSG_SW_RELOAD_EXEC_RES - MSG_TYPE_BASE_VAL] = "MSG_SW_RELOAD_EXEC_RES", + [MSG_SMS_SPI_INT_LINE_SET_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SPI_INT_LINE_SET_REQ", + [MSG_SMS_SPI_INT_LINE_SET_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SPI_INT_LINE_SET_RES", + [MSG_SMS_GPIO_CONFIG_EX_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GPIO_CONFIG_EX_REQ", + [MSG_SMS_GPIO_CONFIG_EX_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GPIO_CONFIG_EX_RES", + [MSG_SMS_WATCHDOG_ACT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_WATCHDOG_ACT_REQ", + [MSG_SMS_WATCHDOG_ACT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_WATCHDOG_ACT_RES", + [MSG_SMS_LOOPBACK_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_LOOPBACK_REQ", + [MSG_SMS_LOOPBACK_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_LOOPBACK_RES", + [MSG_SMS_RAW_CAPTURE_START_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_RAW_CAPTURE_START_REQ", + [MSG_SMS_RAW_CAPTURE_START_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_RAW_CAPTURE_START_RES", + [MSG_SMS_RAW_CAPTURE_ABORT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_RAW_CAPTURE_ABORT_REQ", + [MSG_SMS_RAW_CAPTURE_ABORT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_RAW_CAPTURE_ABORT_RES", + [MSG_SMS_RAW_CAPTURE_COMPLETE_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_RAW_CAPTURE_COMPLETE_IND", + [MSG_SMS_DATA_PUMP_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_DATA_PUMP_IND", + [MSG_SMS_DATA_PUMP_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DATA_PUMP_REQ", + [MSG_SMS_DATA_PUMP_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DATA_PUMP_RES", + [MSG_SMS_FLASH_DL_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_FLASH_DL_REQ", + [MSG_SMS_EXEC_TEST_1_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_EXEC_TEST_1_REQ", + [MSG_SMS_EXEC_TEST_1_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_EXEC_TEST_1_RES", + [MSG_SMS_ENBALE_TS_INTERFACE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ENBALE_TS_INTERFACE_REQ", + [MSG_SMS_ENBALE_TS_INTERFACE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ENBALE_TS_INTERFACE_RES", + [MSG_SMS_SPI_SET_BUS_WIDTH_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SPI_SET_BUS_WIDTH_REQ", + [MSG_SMS_SPI_SET_BUS_WIDTH_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SPI_SET_BUS_WIDTH_RES", + [MSG_SMS_SEND_EMM_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SEND_EMM_REQ", + [MSG_SMS_SEND_EMM_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SEND_EMM_RES", + [MSG_SMS_DISABLE_TS_INTERFACE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DISABLE_TS_INTERFACE_REQ", + [MSG_SMS_DISABLE_TS_INTERFACE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DISABLE_TS_INTERFACE_RES", + [MSG_SMS_IS_BUF_FREE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_IS_BUF_FREE_REQ", + [MSG_SMS_IS_BUF_FREE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_IS_BUF_FREE_RES", + [MSG_SMS_EXT_ANTENNA_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_EXT_ANTENNA_REQ", + [MSG_SMS_EXT_ANTENNA_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_EXT_ANTENNA_RES", + [MSG_SMS_CMMB_GET_NET_OF_FREQ_REQ_OBSOLETE - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_NET_OF_FREQ_REQ_OBSOLETE", + [MSG_SMS_CMMB_GET_NET_OF_FREQ_RES_OBSOLETE - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_NET_OF_FREQ_RES_OBSOLETE", + [MSG_SMS_BATTERY_LEVEL_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_BATTERY_LEVEL_REQ", + [MSG_SMS_BATTERY_LEVEL_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_BATTERY_LEVEL_RES", + [MSG_SMS_CMMB_INJECT_TABLE_REQ_OBSOLETE - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_INJECT_TABLE_REQ_OBSOLETE", + [MSG_SMS_CMMB_INJECT_TABLE_RES_OBSOLETE - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_INJECT_TABLE_RES_OBSOLETE", + [MSG_SMS_FM_RADIO_BLOCK_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_FM_RADIO_BLOCK_IND", + [MSG_SMS_HOST_NOTIFICATION_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_HOST_NOTIFICATION_IND", + [MSG_SMS_CMMB_GET_CONTROL_TABLE_REQ_OBSOLETE - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_CONTROL_TABLE_REQ_OBSOLETE", + [MSG_SMS_CMMB_GET_CONTROL_TABLE_RES_OBSOLETE - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_CONTROL_TABLE_RES_OBSOLETE", + [MSG_SMS_CMMB_GET_NETWORKS_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_NETWORKS_REQ", + [MSG_SMS_CMMB_GET_NETWORKS_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_NETWORKS_RES", + [MSG_SMS_CMMB_START_SERVICE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_START_SERVICE_REQ", + [MSG_SMS_CMMB_START_SERVICE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_START_SERVICE_RES", + [MSG_SMS_CMMB_STOP_SERVICE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_STOP_SERVICE_REQ", + [MSG_SMS_CMMB_STOP_SERVICE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_STOP_SERVICE_RES", + [MSG_SMS_CMMB_ADD_CHANNEL_FILTER_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_ADD_CHANNEL_FILTER_REQ", + [MSG_SMS_CMMB_ADD_CHANNEL_FILTER_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_ADD_CHANNEL_FILTER_RES", + [MSG_SMS_CMMB_REMOVE_CHANNEL_FILTER_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_REMOVE_CHANNEL_FILTER_REQ", + [MSG_SMS_CMMB_REMOVE_CHANNEL_FILTER_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_REMOVE_CHANNEL_FILTER_RES", + [MSG_SMS_CMMB_START_CONTROL_INFO_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_START_CONTROL_INFO_REQ", + [MSG_SMS_CMMB_START_CONTROL_INFO_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_START_CONTROL_INFO_RES", + [MSG_SMS_CMMB_STOP_CONTROL_INFO_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_STOP_CONTROL_INFO_REQ", + [MSG_SMS_CMMB_STOP_CONTROL_INFO_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_STOP_CONTROL_INFO_RES", + [MSG_SMS_ISDBT_TUNE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_ISDBT_TUNE_REQ", + [MSG_SMS_ISDBT_TUNE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_ISDBT_TUNE_RES", + [MSG_SMS_TRANSMISSION_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_TRANSMISSION_IND", + [MSG_SMS_PID_STATISTICS_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_PID_STATISTICS_IND", + [MSG_SMS_POWER_DOWN_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_POWER_DOWN_IND", + [MSG_SMS_POWER_DOWN_CONF - MSG_TYPE_BASE_VAL] = "MSG_SMS_POWER_DOWN_CONF", + [MSG_SMS_POWER_UP_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_POWER_UP_IND", + [MSG_SMS_POWER_UP_CONF - MSG_TYPE_BASE_VAL] = "MSG_SMS_POWER_UP_CONF", + [MSG_SMS_POWER_MODE_SET_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_POWER_MODE_SET_REQ", + [MSG_SMS_POWER_MODE_SET_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_POWER_MODE_SET_RES", + [MSG_SMS_DEBUG_HOST_EVENT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DEBUG_HOST_EVENT_REQ", + [MSG_SMS_DEBUG_HOST_EVENT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DEBUG_HOST_EVENT_RES", + [MSG_SMS_NEW_CRYSTAL_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_NEW_CRYSTAL_REQ", + [MSG_SMS_NEW_CRYSTAL_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_NEW_CRYSTAL_RES", + [MSG_SMS_CONFIG_SPI_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CONFIG_SPI_REQ", + [MSG_SMS_CONFIG_SPI_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CONFIG_SPI_RES", + [MSG_SMS_I2C_SHORT_STAT_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_I2C_SHORT_STAT_IND", + [MSG_SMS_START_IR_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_START_IR_REQ", + [MSG_SMS_START_IR_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_START_IR_RES", + [MSG_SMS_IR_SAMPLES_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_IR_SAMPLES_IND", + [MSG_SMS_CMMB_CA_SERVICE_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_CA_SERVICE_IND", + [MSG_SMS_SLAVE_DEVICE_DETECTED - MSG_TYPE_BASE_VAL] = "MSG_SMS_SLAVE_DEVICE_DETECTED", + [MSG_SMS_INTERFACE_LOCK_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_INTERFACE_LOCK_IND", + [MSG_SMS_INTERFACE_UNLOCK_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_INTERFACE_UNLOCK_IND", + [MSG_SMS_SEND_ROSUM_BUFF_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SEND_ROSUM_BUFF_REQ", + [MSG_SMS_SEND_ROSUM_BUFF_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SEND_ROSUM_BUFF_RES", + [MSG_SMS_ROSUM_BUFF - MSG_TYPE_BASE_VAL] = "MSG_SMS_ROSUM_BUFF", + [MSG_SMS_SET_AES128_KEY_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_AES128_KEY_REQ", + [MSG_SMS_SET_AES128_KEY_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_AES128_KEY_RES", + [MSG_SMS_MBBMS_WRITE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MBBMS_WRITE_REQ", + [MSG_SMS_MBBMS_WRITE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_MBBMS_WRITE_RES", + [MSG_SMS_MBBMS_READ_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_MBBMS_READ_IND", + [MSG_SMS_IQ_STREAM_START_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_IQ_STREAM_START_REQ", + [MSG_SMS_IQ_STREAM_START_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_IQ_STREAM_START_RES", + [MSG_SMS_IQ_STREAM_STOP_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_IQ_STREAM_STOP_REQ", + [MSG_SMS_IQ_STREAM_STOP_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_IQ_STREAM_STOP_RES", + [MSG_SMS_IQ_STREAM_DATA_BLOCK - MSG_TYPE_BASE_VAL] = "MSG_SMS_IQ_STREAM_DATA_BLOCK", + [MSG_SMS_GET_EEPROM_VERSION_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_EEPROM_VERSION_REQ", + [MSG_SMS_GET_EEPROM_VERSION_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_GET_EEPROM_VERSION_RES", + [MSG_SMS_SIGNAL_DETECTED_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_SIGNAL_DETECTED_IND", + [MSG_SMS_NO_SIGNAL_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_NO_SIGNAL_IND", + [MSG_SMS_MRC_SHUTDOWN_SLAVE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MRC_SHUTDOWN_SLAVE_REQ", + [MSG_SMS_MRC_SHUTDOWN_SLAVE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_MRC_SHUTDOWN_SLAVE_RES", + [MSG_SMS_MRC_BRINGUP_SLAVE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_MRC_BRINGUP_SLAVE_REQ", + [MSG_SMS_MRC_BRINGUP_SLAVE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_MRC_BRINGUP_SLAVE_RES", + [MSG_SMS_EXTERNAL_LNA_CTRL_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_EXTERNAL_LNA_CTRL_REQ", + [MSG_SMS_EXTERNAL_LNA_CTRL_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_EXTERNAL_LNA_CTRL_RES", + [MSG_SMS_SET_PERIODIC_STATISTICS_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_PERIODIC_STATISTICS_REQ", + [MSG_SMS_SET_PERIODIC_STATISTICS_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SET_PERIODIC_STATISTICS_RES", + [MSG_SMS_CMMB_SET_AUTO_OUTPUT_TS0_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_SET_AUTO_OUTPUT_TS0_REQ", + [MSG_SMS_CMMB_SET_AUTO_OUTPUT_TS0_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_SET_AUTO_OUTPUT_TS0_RES", + [LOCAL_TUNE - MSG_TYPE_BASE_VAL] = "LOCAL_TUNE", + [LOCAL_IFFT_H_ICI - MSG_TYPE_BASE_VAL] = "LOCAL_IFFT_H_ICI", + [MSG_RESYNC_REQ - MSG_TYPE_BASE_VAL] = "MSG_RESYNC_REQ", + [MSG_SMS_CMMB_GET_MRC_STATISTICS_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_MRC_STATISTICS_REQ", + [MSG_SMS_CMMB_GET_MRC_STATISTICS_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_MRC_STATISTICS_RES", + [MSG_SMS_LOG_EX_ITEM - MSG_TYPE_BASE_VAL] = "MSG_SMS_LOG_EX_ITEM", + [MSG_SMS_DEVICE_DATA_LOSS_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_DEVICE_DATA_LOSS_IND", + [MSG_SMS_MRC_WATCHDOG_TRIGGERED_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_MRC_WATCHDOG_TRIGGERED_IND", + [MSG_SMS_USER_MSG_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_USER_MSG_REQ", + [MSG_SMS_USER_MSG_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_USER_MSG_RES", + [MSG_SMS_SMART_CARD_INIT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SMART_CARD_INIT_REQ", + [MSG_SMS_SMART_CARD_INIT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SMART_CARD_INIT_RES", + [MSG_SMS_SMART_CARD_WRITE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SMART_CARD_WRITE_REQ", + [MSG_SMS_SMART_CARD_WRITE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SMART_CARD_WRITE_RES", + [MSG_SMS_SMART_CARD_READ_IND - MSG_TYPE_BASE_VAL] = "MSG_SMS_SMART_CARD_READ_IND", + [MSG_SMS_TSE_ENABLE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_TSE_ENABLE_REQ", + [MSG_SMS_TSE_ENABLE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_TSE_ENABLE_RES", + [MSG_SMS_CMMB_GET_SHORT_STATISTICS_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_SHORT_STATISTICS_REQ", + [MSG_SMS_CMMB_GET_SHORT_STATISTICS_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_GET_SHORT_STATISTICS_RES", + [MSG_SMS_LED_CONFIG_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_LED_CONFIG_REQ", + [MSG_SMS_LED_CONFIG_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_LED_CONFIG_RES", + [MSG_PWM_ANTENNA_REQ - MSG_TYPE_BASE_VAL] = "MSG_PWM_ANTENNA_REQ", + [MSG_PWM_ANTENNA_RES - MSG_TYPE_BASE_VAL] = "MSG_PWM_ANTENNA_RES", + [MSG_SMS_CMMB_SMD_SN_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_SMD_SN_REQ", + [MSG_SMS_CMMB_SMD_SN_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_SMD_SN_RES", + [MSG_SMS_CMMB_SET_CA_CW_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_SET_CA_CW_REQ", + [MSG_SMS_CMMB_SET_CA_CW_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_SET_CA_CW_RES", + [MSG_SMS_CMMB_SET_CA_SALT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_SET_CA_SALT_REQ", + [MSG_SMS_CMMB_SET_CA_SALT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_CMMB_SET_CA_SALT_RES", + [MSG_SMS_NSCD_INIT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_NSCD_INIT_REQ", + [MSG_SMS_NSCD_INIT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_NSCD_INIT_RES", + [MSG_SMS_NSCD_PROCESS_SECTION_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_NSCD_PROCESS_SECTION_REQ", + [MSG_SMS_NSCD_PROCESS_SECTION_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_NSCD_PROCESS_SECTION_RES", + [MSG_SMS_DBD_CREATE_OBJECT_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_CREATE_OBJECT_REQ", + [MSG_SMS_DBD_CREATE_OBJECT_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_CREATE_OBJECT_RES", + [MSG_SMS_DBD_CONFIGURE_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_CONFIGURE_REQ", + [MSG_SMS_DBD_CONFIGURE_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_CONFIGURE_RES", + [MSG_SMS_DBD_SET_KEYS_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_SET_KEYS_REQ", + [MSG_SMS_DBD_SET_KEYS_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_SET_KEYS_RES", + [MSG_SMS_DBD_PROCESS_HEADER_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_PROCESS_HEADER_REQ", + [MSG_SMS_DBD_PROCESS_HEADER_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_PROCESS_HEADER_RES", + [MSG_SMS_DBD_PROCESS_DATA_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_PROCESS_DATA_REQ", + [MSG_SMS_DBD_PROCESS_DATA_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_PROCESS_DATA_RES", + [MSG_SMS_DBD_PROCESS_GET_DATA_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_PROCESS_GET_DATA_REQ", + [MSG_SMS_DBD_PROCESS_GET_DATA_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_DBD_PROCESS_GET_DATA_RES", + [MSG_SMS_NSCD_OPEN_SESSION_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_NSCD_OPEN_SESSION_REQ", + [MSG_SMS_NSCD_OPEN_SESSION_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_NSCD_OPEN_SESSION_RES", + [MSG_SMS_SEND_HOST_DATA_TO_DEMUX_REQ - MSG_TYPE_BASE_VAL] = "MSG_SMS_SEND_HOST_DATA_TO_DEMUX_REQ", + [MSG_SMS_SEND_HOST_DATA_TO_DEMUX_RES - MSG_TYPE_BASE_VAL] = "MSG_SMS_SEND_HOST_DATA_TO_DEMUX_RES", + [MSG_LAST_MSG_TYPE - MSG_TYPE_BASE_VAL] = "MSG_LAST_MSG_TYPE", +}; + +char *smscore_translate_msg(enum msg_types msgtype) +{ + int i = msgtype - MSG_TYPE_BASE_VAL; + char *msg; + + if (i < 0 || i >= ARRAY_SIZE(siano_msgs)) + return "Unknown msg type"; + + msg = siano_msgs[i]; + + if (!*msg) + return "Unknown msg type"; + + return msg; +} +EXPORT_SYMBOL_GPL(smscore_translate_msg); + +void smscore_set_board_id(struct smscore_device_t *core, int id) +{ + core->board_id = id; +} + +int smscore_led_state(struct smscore_device_t *core, int led) +{ + if (led >= 0) + core->led_state = led; + return core->led_state; +} +EXPORT_SYMBOL_GPL(smscore_set_board_id); + +int smscore_get_board_id(struct smscore_device_t *core) +{ + return core->board_id; +} +EXPORT_SYMBOL_GPL(smscore_get_board_id); + +struct smscore_registry_entry_t { + struct list_head entry; + char devpath[32]; + int mode; + enum sms_device_type_st type; +}; + +static struct list_head g_smscore_notifyees; +static struct list_head g_smscore_devices; +static struct mutex g_smscore_deviceslock; + +static struct list_head g_smscore_registry; +static struct mutex g_smscore_registrylock; + +static int default_mode = DEVICE_MODE_NONE; + +module_param(default_mode, int, 0644); +MODULE_PARM_DESC(default_mode, "default firmware id (device mode)"); + +static struct smscore_registry_entry_t *smscore_find_registry(char *devpath) +{ + struct smscore_registry_entry_t *entry; + struct list_head *next; + + kmutex_lock(&g_smscore_registrylock); + for (next = g_smscore_registry.next; + next != &g_smscore_registry; + next = next->next) { + entry = (struct smscore_registry_entry_t *) next; + if (!strcmp(entry->devpath, devpath)) { + kmutex_unlock(&g_smscore_registrylock); + return entry; + } + } + entry = kmalloc(sizeof(struct smscore_registry_entry_t), GFP_KERNEL); + if (entry) { + entry->mode = default_mode; + strcpy(entry->devpath, devpath); + list_add(&entry->entry, &g_smscore_registry); + } else + sms_err("failed to create smscore_registry."); + kmutex_unlock(&g_smscore_registrylock); + return entry; +} + +int smscore_registry_getmode(char *devpath) +{ + struct smscore_registry_entry_t *entry; + + entry = smscore_find_registry(devpath); + if (entry) + return entry->mode; + else + sms_err("No registry found."); + + return default_mode; +} +EXPORT_SYMBOL_GPL(smscore_registry_getmode); + +static enum sms_device_type_st smscore_registry_gettype(char *devpath) +{ + struct smscore_registry_entry_t *entry; + + entry = smscore_find_registry(devpath); + if (entry) + return entry->type; + else + sms_err("No registry found."); + + return -EINVAL; +} + +static void smscore_registry_setmode(char *devpath, int mode) +{ + struct smscore_registry_entry_t *entry; + + entry = smscore_find_registry(devpath); + if (entry) + entry->mode = mode; + else + sms_err("No registry found."); +} + +static void smscore_registry_settype(char *devpath, + enum sms_device_type_st type) +{ + struct smscore_registry_entry_t *entry; + + entry = smscore_find_registry(devpath); + if (entry) + entry->type = type; + else + sms_err("No registry found."); +} + + +static void list_add_locked(struct list_head *new, struct list_head *head, + spinlock_t *lock) +{ + unsigned long flags; + + spin_lock_irqsave(lock, flags); + + list_add(new, head); + + spin_unlock_irqrestore(lock, flags); +} + +/** + * register a client callback that called when device plugged in/unplugged + * NOTE: if devices exist callback is called immediately for each device + * + * @param hotplug callback + * + * @return 0 on success, <0 on error. + */ +int smscore_register_hotplug(hotplug_t hotplug) +{ + struct smscore_device_notifyee_t *notifyee; + struct list_head *next, *first; + int rc = 0; + + kmutex_lock(&g_smscore_deviceslock); + + notifyee = kmalloc(sizeof(struct smscore_device_notifyee_t), + GFP_KERNEL); + if (notifyee) { + /* now notify callback about existing devices */ + first = &g_smscore_devices; + for (next = first->next; + next != first && !rc; + next = next->next) { + struct smscore_device_t *coredev = + (struct smscore_device_t *) next; + rc = hotplug(coredev, coredev->device, 1); + } + + if (rc >= 0) { + notifyee->hotplug = hotplug; + list_add(¬ifyee->entry, &g_smscore_notifyees); + } else + kfree(notifyee); + } else + rc = -ENOMEM; + + kmutex_unlock(&g_smscore_deviceslock); + + return rc; +} +EXPORT_SYMBOL_GPL(smscore_register_hotplug); + +/** + * unregister a client callback that called when device plugged in/unplugged + * + * @param hotplug callback + * + */ +void smscore_unregister_hotplug(hotplug_t hotplug) +{ + struct list_head *next, *first; + + kmutex_lock(&g_smscore_deviceslock); + + first = &g_smscore_notifyees; + + for (next = first->next; next != first;) { + struct smscore_device_notifyee_t *notifyee = + (struct smscore_device_notifyee_t *) next; + next = next->next; + + if (notifyee->hotplug == hotplug) { + list_del(¬ifyee->entry); + kfree(notifyee); + } + } + + kmutex_unlock(&g_smscore_deviceslock); +} +EXPORT_SYMBOL_GPL(smscore_unregister_hotplug); + +static void smscore_notify_clients(struct smscore_device_t *coredev) +{ + struct smscore_client_t *client; + + /* the client must call smscore_unregister_client from remove handler */ + while (!list_empty(&coredev->clients)) { + client = (struct smscore_client_t *) coredev->clients.next; + client->onremove_handler(client->context); + } +} + +static int smscore_notify_callbacks(struct smscore_device_t *coredev, + struct device *device, int arrival) +{ + struct smscore_device_notifyee_t *elem; + int rc = 0; + + /* note: must be called under g_deviceslock */ + + list_for_each_entry(elem, &g_smscore_notifyees, entry) { + rc = elem->hotplug(coredev, device, arrival); + if (rc < 0) + break; + } + + return rc; +} + +static struct +smscore_buffer_t *smscore_createbuffer(u8 *buffer, void *common_buffer, + dma_addr_t common_buffer_phys) +{ + struct smscore_buffer_t *cb; + + cb = kzalloc(sizeof(struct smscore_buffer_t), GFP_KERNEL); + if (!cb) { + sms_info("kzalloc(...) failed"); + return NULL; + } + + cb->p = buffer; + cb->offset_in_common = buffer - (u8 *) common_buffer; + cb->phys = common_buffer_phys + cb->offset_in_common; + + return cb; +} + +/** + * creates coredev object for a device, prepares buffers, + * creates buffer mappings, notifies registered hotplugs about new device. + * + * @param params device pointer to struct with device specific parameters + * and handlers + * @param coredev pointer to a value that receives created coredev object + * + * @return 0 on success, <0 on error. + */ +int smscore_register_device(struct smsdevice_params_t *params, + struct smscore_device_t **coredev) +{ + struct smscore_device_t *dev; + u8 *buffer; + + dev = kzalloc(sizeof(struct smscore_device_t), GFP_KERNEL); + if (!dev) { + sms_info("kzalloc(...) failed"); + return -ENOMEM; + } + + /* init list entry so it could be safe in smscore_unregister_device */ + INIT_LIST_HEAD(&dev->entry); + + /* init queues */ + INIT_LIST_HEAD(&dev->clients); + INIT_LIST_HEAD(&dev->buffers); + + /* init locks */ + spin_lock_init(&dev->clientslock); + spin_lock_init(&dev->bufferslock); + + /* init completion events */ + init_completion(&dev->version_ex_done); + init_completion(&dev->data_download_done); + init_completion(&dev->data_validity_done); + init_completion(&dev->trigger_done); + init_completion(&dev->init_device_done); + init_completion(&dev->reload_start_done); + init_completion(&dev->resume_done); + init_completion(&dev->gpio_configuration_done); + init_completion(&dev->gpio_set_level_done); + init_completion(&dev->gpio_get_level_done); + init_completion(&dev->ir_init_done); + + /* Buffer management */ + init_waitqueue_head(&dev->buffer_mng_waitq); + + /* alloc common buffer */ + dev->common_buffer_size = params->buffer_size * params->num_buffers; + dev->common_buffer = dma_alloc_coherent(NULL, dev->common_buffer_size, + &dev->common_buffer_phys, + GFP_KERNEL | GFP_DMA); + if (!dev->common_buffer) { + smscore_unregister_device(dev); + return -ENOMEM; + } + + /* prepare dma buffers */ + for (buffer = dev->common_buffer; + dev->num_buffers < params->num_buffers; + dev->num_buffers++, buffer += params->buffer_size) { + struct smscore_buffer_t *cb; + + cb = smscore_createbuffer(buffer, dev->common_buffer, + dev->common_buffer_phys); + if (!cb) { + smscore_unregister_device(dev); + return -ENOMEM; + } + + smscore_putbuffer(dev, cb); + } + + sms_info("allocated %d buffers", dev->num_buffers); + + dev->mode = DEVICE_MODE_NONE; + dev->board_id = SMS_BOARD_UNKNOWN; + dev->context = params->context; + dev->device = params->device; + dev->setmode_handler = params->setmode_handler; + dev->detectmode_handler = params->detectmode_handler; + dev->sendrequest_handler = params->sendrequest_handler; + dev->preload_handler = params->preload_handler; + dev->postload_handler = params->postload_handler; + + dev->device_flags = params->flags; + strcpy(dev->devpath, params->devpath); + + smscore_registry_settype(dev->devpath, params->device_type); + + /* add device to devices list */ + kmutex_lock(&g_smscore_deviceslock); + list_add(&dev->entry, &g_smscore_devices); + kmutex_unlock(&g_smscore_deviceslock); + + *coredev = dev; + + sms_info("device %p created", dev); + + return 0; +} +EXPORT_SYMBOL_GPL(smscore_register_device); + + +static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev, + void *buffer, size_t size, struct completion *completion) { + int rc; + + if (completion == NULL) + return -EINVAL; + init_completion(completion); + + rc = coredev->sendrequest_handler(coredev->context, buffer, size); + if (rc < 0) { + sms_info("sendrequest returned error %d", rc); + return rc; + } + + return wait_for_completion_timeout(completion, + msecs_to_jiffies(SMS_PROTOCOL_MAX_RAOUNDTRIP_MS)) ? + 0 : -ETIME; +} + +/** + * Starts & enables IR operations + * + * @return 0 on success, < 0 on error. + */ +static int smscore_init_ir(struct smscore_device_t *coredev) +{ + int ir_io; + int rc; + void *buffer; + + coredev->ir.dev = NULL; + ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir; + if (ir_io) {/* only if IR port exist we use IR sub-module */ + sms_info("IR loading"); + rc = sms_ir_init(coredev); + + if (rc != 0) + sms_err("Error initialization DTV IR sub-module"); + else { + buffer = kmalloc(sizeof(struct sms_msg_data2) + + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + if (buffer) { + struct sms_msg_data2 *msg = + (struct sms_msg_data2 *) + SMS_ALIGN_ADDRESS(buffer); + + SMS_INIT_MSG(&msg->x_msg_header, + MSG_SMS_START_IR_REQ, + sizeof(struct sms_msg_data2)); + msg->msg_data[0] = coredev->ir.controller; + msg->msg_data[1] = coredev->ir.timeout; + + rc = smscore_sendrequest_and_wait(coredev, msg, + msg->x_msg_header. msg_length, + &coredev->ir_init_done); + + kfree(buffer); + } else + sms_err + ("Sending IR initialization message failed"); + } + } else + sms_info("IR port has not been detected"); + + return 0; +} + +/** + * configures device features according to board configuration structure. + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * + * @return 0 on success, <0 on error. + */ +static int smscore_configure_board(struct smscore_device_t *coredev) +{ + struct sms_board *board; + + board = sms_get_board(coredev->board_id); + if (!board) { + sms_err("no board configuration exist."); + return -EINVAL; + } + + if (board->mtu) { + struct sms_msg_data mtu_msg; + sms_debug("set max transmit unit %d", board->mtu); + + mtu_msg.x_msg_header.msg_src_id = 0; + mtu_msg.x_msg_header.msg_dst_id = HIF_TASK; + mtu_msg.x_msg_header.msg_flags = 0; + mtu_msg.x_msg_header.msg_type = MSG_SMS_SET_MAX_TX_MSG_LEN_REQ; + mtu_msg.x_msg_header.msg_length = sizeof(mtu_msg); + mtu_msg.msg_data[0] = board->mtu; + + coredev->sendrequest_handler(coredev->context, &mtu_msg, + sizeof(mtu_msg)); + } + + if (board->crystal) { + struct sms_msg_data crys_msg; + sms_debug("set crystal value %d", board->crystal); + + SMS_INIT_MSG(&crys_msg.x_msg_header, + MSG_SMS_NEW_CRYSTAL_REQ, + sizeof(crys_msg)); + crys_msg.msg_data[0] = board->crystal; + + coredev->sendrequest_handler(coredev->context, &crys_msg, + sizeof(crys_msg)); + } + + return 0; +} + +/** + * sets initial device mode and notifies client hotplugs that device is ready + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * + * @return 0 on success, <0 on error. + */ +int smscore_start_device(struct smscore_device_t *coredev) +{ + int rc; + int board_id = smscore_get_board_id(coredev); + int mode = smscore_registry_getmode(coredev->devpath); + + /* Device is initialized as DEVICE_MODE_NONE */ + if (board_id != SMS_BOARD_UNKNOWN && mode == DEVICE_MODE_NONE) + mode = sms_get_board(board_id)->default_mode; + + rc = smscore_set_device_mode(coredev, mode); + if (rc < 0) { + sms_info("set device mode faile , rc %d", rc); + return rc; + } + rc = smscore_configure_board(coredev); + if (rc < 0) { + sms_info("configure board failed , rc %d", rc); + return rc; + } + + kmutex_lock(&g_smscore_deviceslock); + + rc = smscore_notify_callbacks(coredev, coredev->device, 1); + smscore_init_ir(coredev); + + sms_info("device %p started, rc %d", coredev, rc); + + kmutex_unlock(&g_smscore_deviceslock); + + return rc; +} +EXPORT_SYMBOL_GPL(smscore_start_device); + + +static int smscore_load_firmware_family2(struct smscore_device_t *coredev, + void *buffer, size_t size) +{ + struct sms_firmware *firmware = (struct sms_firmware *) buffer; + struct sms_msg_data4 *msg; + u32 mem_address, calc_checksum = 0; + u32 i, *ptr; + u8 *payload = firmware->payload; + int rc = 0; + firmware->start_address = le32_to_cpu(firmware->start_address); + firmware->length = le32_to_cpu(firmware->length); + + mem_address = firmware->start_address; + + sms_info("loading FW to addr 0x%x size %d", + mem_address, firmware->length); + if (coredev->preload_handler) { + rc = coredev->preload_handler(coredev->context); + if (rc < 0) + return rc; + } + + /* PAGE_SIZE buffer shall be enough and dma aligned */ + msg = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA); + if (!msg) + return -ENOMEM; + + if (coredev->mode != DEVICE_MODE_NONE) { + sms_debug("sending reload command."); + SMS_INIT_MSG(&msg->x_msg_header, MSG_SW_RELOAD_START_REQ, + sizeof(struct sms_msg_hdr)); + rc = smscore_sendrequest_and_wait(coredev, msg, + msg->x_msg_header.msg_length, + &coredev->reload_start_done); + if (rc < 0) { + sms_err("device reload failed, rc %d", rc); + goto exit_fw_download; + } + mem_address = *(u32 *) &payload[20]; + } + + for (i = 0, ptr = (u32 *)firmware->payload; i < firmware->length/4 ; + i++, ptr++) + calc_checksum += *ptr; + + while (size && rc >= 0) { + struct sms_data_download *data_msg = + (struct sms_data_download *) msg; + int payload_size = min_t(int, size, SMS_MAX_PAYLOAD_SIZE); + + SMS_INIT_MSG(&msg->x_msg_header, MSG_SMS_DATA_DOWNLOAD_REQ, + (u16)(sizeof(struct sms_msg_hdr) + + sizeof(u32) + payload_size)); + + data_msg->mem_addr = mem_address; + memcpy(data_msg->payload, payload, payload_size); + + rc = smscore_sendrequest_and_wait(coredev, data_msg, + data_msg->x_msg_header.msg_length, + &coredev->data_download_done); + + payload += payload_size; + size -= payload_size; + mem_address += payload_size; + } + + if (rc < 0) + goto exit_fw_download; + + sms_err("sending MSG_SMS_DATA_VALIDITY_REQ expecting 0x%x", + calc_checksum); + SMS_INIT_MSG(&msg->x_msg_header, MSG_SMS_DATA_VALIDITY_REQ, + sizeof(msg->x_msg_header) + + sizeof(u32) * 3); + msg->msg_data[0] = firmware->start_address; + /* Entry point */ + msg->msg_data[1] = firmware->length; + msg->msg_data[2] = 0; /* Regular checksum*/ + rc = smscore_sendrequest_and_wait(coredev, msg, + msg->x_msg_header.msg_length, + &coredev->data_validity_done); + if (rc < 0) + goto exit_fw_download; + + if (coredev->mode == DEVICE_MODE_NONE) { + struct sms_msg_data *trigger_msg = + (struct sms_msg_data *) msg; + + sms_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ"); + SMS_INIT_MSG(&msg->x_msg_header, + MSG_SMS_SWDOWNLOAD_TRIGGER_REQ, + sizeof(struct sms_msg_hdr) + + sizeof(u32) * 5); + + trigger_msg->msg_data[0] = firmware->start_address; + /* Entry point */ + trigger_msg->msg_data[1] = 6; /* Priority */ + trigger_msg->msg_data[2] = 0x200; /* Stack size */ + trigger_msg->msg_data[3] = 0; /* Parameter */ + trigger_msg->msg_data[4] = 4; /* Task ID */ + + rc = smscore_sendrequest_and_wait(coredev, trigger_msg, + trigger_msg->x_msg_header.msg_length, + &coredev->trigger_done); + } else { + SMS_INIT_MSG(&msg->x_msg_header, MSG_SW_RELOAD_EXEC_REQ, + sizeof(struct sms_msg_hdr)); + rc = coredev->sendrequest_handler(coredev->context, msg, + msg->x_msg_header.msg_length); + } + + if (rc < 0) + goto exit_fw_download; + + /* + * backward compatibility - wait to device_ready_done for + * not more than 400 ms + */ + msleep(400); + +exit_fw_download: + kfree(msg); + + if (coredev->postload_handler) { + sms_debug("rc=%d, postload=0x%p", rc, coredev->postload_handler); + if (rc >= 0) + return coredev->postload_handler(coredev->context); + } + + sms_debug("rc=%d", rc); + return rc; +} + +static char *smscore_fw_lkup[][DEVICE_MODE_MAX] = { + [SMS_NOVA_A0] = { + [DEVICE_MODE_DVBT] = SMS_FW_DVB_NOVA_12MHZ, + [DEVICE_MODE_DVBH] = SMS_FW_DVB_NOVA_12MHZ, + [DEVICE_MODE_DAB_TDMB] = SMS_FW_TDMB_NOVA_12MHZ, + [DEVICE_MODE_DVBT_BDA] = SMS_FW_DVB_NOVA_12MHZ, + [DEVICE_MODE_ISDBT] = SMS_FW_ISDBT_NOVA_12MHZ, + [DEVICE_MODE_ISDBT_BDA] = SMS_FW_ISDBT_NOVA_12MHZ, + }, + [SMS_NOVA_B0] = { + [DEVICE_MODE_DVBT] = SMS_FW_DVB_NOVA_12MHZ_B0, + [DEVICE_MODE_DVBH] = SMS_FW_DVB_NOVA_12MHZ_B0, + [DEVICE_MODE_DAB_TDMB] = SMS_FW_TDMB_NOVA_12MHZ_B0, + [DEVICE_MODE_DVBT_BDA] = SMS_FW_DVB_NOVA_12MHZ_B0, + [DEVICE_MODE_ISDBT] = SMS_FW_ISDBT_NOVA_12MHZ_B0, + [DEVICE_MODE_ISDBT_BDA] = SMS_FW_ISDBT_NOVA_12MHZ_B0, + [DEVICE_MODE_FM_RADIO] = SMS_FW_FM_RADIO, + [DEVICE_MODE_FM_RADIO_BDA] = SMS_FW_FM_RADIO, + }, + [SMS_VEGA] = { + [DEVICE_MODE_CMMB] = SMS_FW_CMMB_VEGA_12MHZ, + }, + [SMS_VENICE] = { + [DEVICE_MODE_CMMB] = SMS_FW_CMMB_VENICE_12MHZ, + }, + [SMS_MING] = { + [DEVICE_MODE_CMMB] = SMS_FW_CMMB_MING_APP, + }, + [SMS_PELE] = { + [DEVICE_MODE_ISDBT] = SMS_FW_ISDBT_PELE, + [DEVICE_MODE_ISDBT_BDA] = SMS_FW_ISDBT_PELE, + }, + [SMS_RIO] = { + [DEVICE_MODE_DVBT] = SMS_FW_DVB_RIO, + [DEVICE_MODE_DVBH] = SMS_FW_DVBH_RIO, + [DEVICE_MODE_DVBT_BDA] = SMS_FW_DVB_RIO, + [DEVICE_MODE_ISDBT] = SMS_FW_ISDBT_RIO, + [DEVICE_MODE_ISDBT_BDA] = SMS_FW_ISDBT_RIO, + [DEVICE_MODE_FM_RADIO] = SMS_FW_FM_RADIO_RIO, + [DEVICE_MODE_FM_RADIO_BDA] = SMS_FW_FM_RADIO_RIO, + }, + [SMS_DENVER_1530] = { + [DEVICE_MODE_ATSC] = SMS_FW_ATSC_DENVER, + }, + [SMS_DENVER_2160] = { + [DEVICE_MODE_DAB_TDMB] = SMS_FW_TDMB_DENVER, + }, +}; + +/** + * get firmware file name from one of the two mechanisms : sms_boards or + * smscore_fw_lkup. + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * @param mode requested mode of operation + * @param lookup if 1, always get the fw filename from smscore_fw_lkup + * table. if 0, try first to get from sms_boards + * + * @return 0 on success, <0 on error. + */ +static char *smscore_get_fw_filename(struct smscore_device_t *coredev, + int mode) +{ + char **fw; + int board_id = smscore_get_board_id(coredev); + enum sms_device_type_st type; + + type = smscore_registry_gettype(coredev->devpath); + + /* Prevent looking outside the smscore_fw_lkup table */ + if (type <= SMS_UNKNOWN_TYPE || type >= SMS_NUM_OF_DEVICE_TYPES) + return NULL; + if (mode <= DEVICE_MODE_NONE || mode >= DEVICE_MODE_MAX) + return NULL; + + sms_debug("trying to get fw name from sms_boards board_id %d mode %d", + board_id, mode); + fw = sms_get_board(board_id)->fw; + if (!fw || !fw[mode]) { + sms_debug("cannot find fw name in sms_boards, getting from lookup table mode %d type %d", + mode, type); + return smscore_fw_lkup[type][mode]; + } + + return fw[mode]; +} + +/** + * loads specified firmware into a buffer and calls device loadfirmware_handler + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * @param filename null-terminated string specifies firmware file name + * @param loadfirmware_handler device handler that loads firmware + * + * @return 0 on success, <0 on error. + */ +static int smscore_load_firmware_from_file(struct smscore_device_t *coredev, + int mode, + loadfirmware_t loadfirmware_handler) +{ + int rc = -ENOENT; + u8 *fw_buf; + u32 fw_buf_size; + const struct firmware *fw; + + char *fw_filename = smscore_get_fw_filename(coredev, mode); + if (!fw_filename) { + sms_info("mode %d not supported on this device", mode); + return -ENOENT; + } + sms_debug("Firmware name: %s", fw_filename); + + if (loadfirmware_handler == NULL && !(coredev->device_flags + & SMS_DEVICE_FAMILY2)) + return -EINVAL; + + rc = request_firmware(&fw, fw_filename, coredev->device); + if (rc < 0) { + sms_info("failed to open \"%s\"", fw_filename); + return rc; + } + sms_info("read fw %s, buffer size=0x%zx", fw_filename, fw->size); + fw_buf = kmalloc(ALIGN(fw->size, SMS_ALLOC_ALIGNMENT), + GFP_KERNEL | GFP_DMA); + if (!fw_buf) { + sms_info("failed to allocate firmware buffer"); + return -ENOMEM; + } + memcpy(fw_buf, fw->data, fw->size); + fw_buf_size = fw->size; + + rc = (coredev->device_flags & SMS_DEVICE_FAMILY2) ? + smscore_load_firmware_family2(coredev, fw_buf, fw_buf_size) + : loadfirmware_handler(coredev->context, fw_buf, + fw_buf_size); + + kfree(fw_buf); + release_firmware(fw); + + return rc; +} + +/** + * notifies all clients registered with the device, notifies hotplugs, + * frees all buffers and coredev object + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * + * @return 0 on success, <0 on error. + */ +void smscore_unregister_device(struct smscore_device_t *coredev) +{ + struct smscore_buffer_t *cb; + int num_buffers = 0; + int retry = 0; + + kmutex_lock(&g_smscore_deviceslock); + + /* Release input device (IR) resources */ + sms_ir_exit(coredev); + + smscore_notify_clients(coredev); + smscore_notify_callbacks(coredev, NULL, 0); + + /* at this point all buffers should be back + * onresponse must no longer be called */ + + while (1) { + while (!list_empty(&coredev->buffers)) { + cb = (struct smscore_buffer_t *) coredev->buffers.next; + list_del(&cb->entry); + kfree(cb); + num_buffers++; + } + if (num_buffers == coredev->num_buffers) + break; + if (++retry > 10) { + sms_info("exiting although not all buffers released."); + break; + } + + sms_info("waiting for %d buffer(s)", + coredev->num_buffers - num_buffers); + kmutex_unlock(&g_smscore_deviceslock); + msleep(100); + kmutex_lock(&g_smscore_deviceslock); + } + + sms_info("freed %d buffers", num_buffers); + + if (coredev->common_buffer) + dma_free_coherent(NULL, coredev->common_buffer_size, + coredev->common_buffer, coredev->common_buffer_phys); + + kfree(coredev->fw_buf); + + list_del(&coredev->entry); + kfree(coredev); + + kmutex_unlock(&g_smscore_deviceslock); + + sms_info("device %p destroyed", coredev); +} +EXPORT_SYMBOL_GPL(smscore_unregister_device); + +static int smscore_detect_mode(struct smscore_device_t *coredev) +{ + void *buffer = kmalloc(sizeof(struct sms_msg_hdr) + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + struct sms_msg_hdr *msg = + (struct sms_msg_hdr *) SMS_ALIGN_ADDRESS(buffer); + int rc; + + if (!buffer) + return -ENOMEM; + + SMS_INIT_MSG(msg, MSG_SMS_GET_VERSION_EX_REQ, + sizeof(struct sms_msg_hdr)); + + rc = smscore_sendrequest_and_wait(coredev, msg, msg->msg_length, + &coredev->version_ex_done); + if (rc == -ETIME) { + sms_err("MSG_SMS_GET_VERSION_EX_REQ failed first try"); + + if (wait_for_completion_timeout(&coredev->resume_done, + msecs_to_jiffies(5000))) { + rc = smscore_sendrequest_and_wait( + coredev, msg, msg->msg_length, + &coredev->version_ex_done); + if (rc < 0) + sms_err("MSG_SMS_GET_VERSION_EX_REQ failed second try, rc %d", + rc); + } else + rc = -ETIME; + } + + kfree(buffer); + + return rc; +} + +/** + * send init device request and wait for response + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * @param mode requested mode of operation + * + * @return 0 on success, <0 on error. + */ +static int smscore_init_device(struct smscore_device_t *coredev, int mode) +{ + void *buffer; + struct sms_msg_data *msg; + int rc = 0; + + buffer = kmalloc(sizeof(struct sms_msg_data) + + SMS_DMA_ALIGNMENT, GFP_KERNEL | GFP_DMA); + if (!buffer) { + sms_err("Could not allocate buffer for init device message."); + return -ENOMEM; + } + + msg = (struct sms_msg_data *)SMS_ALIGN_ADDRESS(buffer); + SMS_INIT_MSG(&msg->x_msg_header, MSG_SMS_INIT_DEVICE_REQ, + sizeof(struct sms_msg_data)); + msg->msg_data[0] = mode; + + rc = smscore_sendrequest_and_wait(coredev, msg, + msg->x_msg_header. msg_length, + &coredev->init_device_done); + + kfree(buffer); + return rc; +} + +/** + * calls device handler to change mode of operation + * NOTE: stellar/usb may disconnect when changing mode + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * @param mode requested mode of operation + * + * @return 0 on success, <0 on error. + */ +int smscore_set_device_mode(struct smscore_device_t *coredev, int mode) +{ + int rc = 0; + + sms_debug("set device mode to %d", mode); + if (coredev->device_flags & SMS_DEVICE_FAMILY2) { + if (mode <= DEVICE_MODE_NONE || mode >= DEVICE_MODE_MAX) { + sms_err("invalid mode specified %d", mode); + return -EINVAL; + } + + smscore_registry_setmode(coredev->devpath, mode); + + if (!(coredev->device_flags & SMS_DEVICE_NOT_READY)) { + rc = smscore_detect_mode(coredev); + if (rc < 0) { + sms_err("mode detect failed %d", rc); + return rc; + } + } + + if (coredev->mode == mode) { + sms_info("device mode %d already set", mode); + return 0; + } + + if (!(coredev->modes_supported & (1 << mode))) { + rc = smscore_load_firmware_from_file(coredev, + mode, NULL); + if (rc >= 0) + sms_info("firmware download success"); + } else { + sms_info("mode %d is already supported by running firmware", + mode); + } + if (coredev->fw_version >= 0x800) { + rc = smscore_init_device(coredev, mode); + if (rc < 0) + sms_err("device init failed, rc %d.", rc); + } + } else { + if (mode <= DEVICE_MODE_NONE || mode >= DEVICE_MODE_MAX) { + sms_err("invalid mode specified %d", mode); + return -EINVAL; + } + + smscore_registry_setmode(coredev->devpath, mode); + + if (coredev->detectmode_handler) + coredev->detectmode_handler(coredev->context, + &coredev->mode); + + if (coredev->mode != mode && coredev->setmode_handler) + rc = coredev->setmode_handler(coredev->context, mode); + } + + if (rc >= 0) { + char *buffer; + coredev->mode = mode; + coredev->device_flags &= ~SMS_DEVICE_NOT_READY; + + buffer = kmalloc(sizeof(struct sms_msg_data) + + SMS_DMA_ALIGNMENT, GFP_KERNEL | GFP_DMA); + if (buffer) { + struct sms_msg_data *msg = (struct sms_msg_data *) SMS_ALIGN_ADDRESS(buffer); + + SMS_INIT_MSG(&msg->x_msg_header, MSG_SMS_INIT_DEVICE_REQ, + sizeof(struct sms_msg_data)); + msg->msg_data[0] = mode; + + rc = smscore_sendrequest_and_wait( + coredev, msg, msg->x_msg_header.msg_length, + &coredev->init_device_done); + + kfree(buffer); + } + } + + if (rc < 0) + sms_err("return error code %d.", rc); + else + sms_debug("Success setting device mode."); + + return rc; +} + +/** + * calls device handler to get current mode of operation + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * + * @return current mode + */ +int smscore_get_device_mode(struct smscore_device_t *coredev) +{ + return coredev->mode; +} +EXPORT_SYMBOL_GPL(smscore_get_device_mode); + +/** + * find client by response id & type within the clients list. + * return client handle or NULL. + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * @param data_type client data type (SMS_DONT_CARE for all types) + * @param id client id (SMS_DONT_CARE for all id) + * + */ +static struct +smscore_client_t *smscore_find_client(struct smscore_device_t *coredev, + int data_type, int id) +{ + struct list_head *first; + struct smscore_client_t *client; + unsigned long flags; + struct list_head *firstid; + struct smscore_idlist_t *client_id; + + spin_lock_irqsave(&coredev->clientslock, flags); + first = &coredev->clients; + list_for_each_entry(client, first, entry) { + firstid = &client->idlist; + list_for_each_entry(client_id, firstid, entry) { + if ((client_id->id == id) && + (client_id->data_type == data_type || + (client_id->data_type == 0))) + goto found; + } + } + client = NULL; +found: + spin_unlock_irqrestore(&coredev->clientslock, flags); + return client; +} + +/** + * find client by response id/type, call clients onresponse handler + * return buffer to pool on error + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * @param cb pointer to response buffer descriptor + * + */ +void smscore_onresponse(struct smscore_device_t *coredev, + struct smscore_buffer_t *cb) { + struct sms_msg_hdr *phdr = (struct sms_msg_hdr *) ((u8 *) cb->p + + cb->offset); + struct smscore_client_t *client; + int rc = -EBUSY; + static unsigned long last_sample_time; /* = 0; */ + static int data_total; /* = 0; */ + unsigned long time_now = jiffies_to_msecs(jiffies); + + if (!last_sample_time) + last_sample_time = time_now; + + if (time_now - last_sample_time > 10000) { + sms_debug("data rate %d bytes/secs", + (int)((data_total * 1000) / + (time_now - last_sample_time))); + + last_sample_time = time_now; + data_total = 0; + } + + data_total += cb->size; + /* Do we need to re-route? */ + if ((phdr->msg_type == MSG_SMS_HO_PER_SLICES_IND) || + (phdr->msg_type == MSG_SMS_TRANSMISSION_IND)) { + if (coredev->mode == DEVICE_MODE_DVBT_BDA) + phdr->msg_dst_id = DVBT_BDA_CONTROL_MSG_ID; + } + + + client = smscore_find_client(coredev, phdr->msg_type, phdr->msg_dst_id); + + /* If no client registered for type & id, + * check for control client where type is not registered */ + if (client) + rc = client->onresponse_handler(client->context, cb); + + if (rc < 0) { + switch (phdr->msg_type) { + case MSG_SMS_ISDBT_TUNE_RES: + break; + case MSG_SMS_RF_TUNE_RES: + break; + case MSG_SMS_SIGNAL_DETECTED_IND: + break; + case MSG_SMS_NO_SIGNAL_IND: + break; + case MSG_SMS_SPI_INT_LINE_SET_RES: + break; + case MSG_SMS_INTERFACE_LOCK_IND: + break; + case MSG_SMS_INTERFACE_UNLOCK_IND: + break; + case MSG_SMS_GET_VERSION_EX_RES: + { + struct sms_version_res *ver = + (struct sms_version_res *) phdr; + sms_debug("Firmware id %d prots 0x%x ver %d.%d", + ver->firmware_id, ver->supported_protocols, + ver->rom_ver_major, ver->rom_ver_minor); + + coredev->mode = ver->firmware_id == 255 ? + DEVICE_MODE_NONE : ver->firmware_id; + coredev->modes_supported = ver->supported_protocols; + coredev->fw_version = ver->rom_ver_major << 8 | + ver->rom_ver_minor; + + complete(&coredev->version_ex_done); + break; + } + case MSG_SMS_INIT_DEVICE_RES: + complete(&coredev->init_device_done); + break; + case MSG_SW_RELOAD_START_RES: + complete(&coredev->reload_start_done); + break; + case MSG_SMS_DATA_VALIDITY_RES: + { + struct sms_msg_data *validity = (struct sms_msg_data *) phdr; + + sms_err("MSG_SMS_DATA_VALIDITY_RES, checksum = 0x%x", + validity->msg_data[0]); + complete(&coredev->data_validity_done); + break; + } + case MSG_SMS_DATA_DOWNLOAD_RES: + complete(&coredev->data_download_done); + break; + case MSG_SW_RELOAD_EXEC_RES: + break; + case MSG_SMS_SWDOWNLOAD_TRIGGER_RES: + complete(&coredev->trigger_done); + break; + case MSG_SMS_SLEEP_RESUME_COMP_IND: + complete(&coredev->resume_done); + break; + case MSG_SMS_GPIO_CONFIG_EX_RES: + complete(&coredev->gpio_configuration_done); + break; + case MSG_SMS_GPIO_SET_LEVEL_RES: + complete(&coredev->gpio_set_level_done); + break; + case MSG_SMS_GPIO_GET_LEVEL_RES: + { + u32 *msgdata = (u32 *) phdr; + coredev->gpio_get_res = msgdata[1]; + sms_debug("gpio level %d", + coredev->gpio_get_res); + complete(&coredev->gpio_get_level_done); + break; + } + case MSG_SMS_START_IR_RES: + complete(&coredev->ir_init_done); + break; + case MSG_SMS_IR_SAMPLES_IND: + sms_ir_event(coredev, + (const char *) + ((char *)phdr + + sizeof(struct sms_msg_hdr)), + (int)phdr->msg_length + - sizeof(struct sms_msg_hdr)); + break; + + case MSG_SMS_DVBT_BDA_DATA: + /* + * It can be received here, if the frontend is + * tuned into a valid channel and the proper firmware + * is loaded. That happens when the module got removed + * and re-inserted, without powering the device off + */ + break; + + default: + sms_debug("message %s(%d) not handled.", + smscore_translate_msg(phdr->msg_type), + phdr->msg_type); + break; + } + smscore_putbuffer(coredev, cb); + } +} +EXPORT_SYMBOL_GPL(smscore_onresponse); + +/** + * return pointer to next free buffer descriptor from core pool + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * + * @return pointer to descriptor on success, NULL on error. + */ + +static struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev) +{ + struct smscore_buffer_t *cb = NULL; + unsigned long flags; + + spin_lock_irqsave(&coredev->bufferslock, flags); + if (!list_empty(&coredev->buffers)) { + cb = (struct smscore_buffer_t *) coredev->buffers.next; + list_del(&cb->entry); + } + spin_unlock_irqrestore(&coredev->bufferslock, flags); + return cb; +} + +struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev) +{ + struct smscore_buffer_t *cb = NULL; + + wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev))); + + return cb; +} +EXPORT_SYMBOL_GPL(smscore_getbuffer); + +/** + * return buffer descriptor to a pool + * + * @param coredev pointer to a coredev object returned by + * smscore_register_device + * @param cb pointer buffer descriptor + * + */ +void smscore_putbuffer(struct smscore_device_t *coredev, + struct smscore_buffer_t *cb) { + wake_up_interruptible(&coredev->buffer_mng_waitq); + list_add_locked(&cb->entry, &coredev->buffers, &coredev->bufferslock); +} +EXPORT_SYMBOL_GPL(smscore_putbuffer); + +static int smscore_validate_client(struct smscore_device_t *coredev, + struct smscore_client_t *client, + int data_type, int id) +{ + struct smscore_idlist_t *listentry; + struct smscore_client_t *registered_client; + + if (!client) { + sms_err("bad parameter."); + return -EINVAL; + } + registered_client = smscore_find_client(coredev, data_type, id); + if (registered_client == client) + return 0; + + if (registered_client) { + sms_err("The msg ID already registered to another client."); + return -EEXIST; + } + listentry = kzalloc(sizeof(struct smscore_idlist_t), GFP_KERNEL); + if (!listentry) { + sms_err("Can't allocate memory for client id."); + return -ENOMEM; + } + listentry->id = id; + listentry->data_type = data_type; + list_add_locked(&listentry->entry, &client->idlist, + &coredev->clientslock); + return 0; +} + +/** + * creates smsclient object, check that id is taken by another client + * + * @param coredev pointer to a coredev object from clients hotplug + * @param initial_id all messages with this id would be sent to this client + * @param data_type all messages of this type would be sent to this client + * @param onresponse_handler client handler that is called to + * process incoming messages + * @param onremove_handler client handler that is called when device is removed + * @param context client-specific context + * @param client pointer to a value that receives created smsclient object + * + * @return 0 on success, <0 on error. + */ +int smscore_register_client(struct smscore_device_t *coredev, + struct smsclient_params_t *params, + struct smscore_client_t **client) +{ + struct smscore_client_t *newclient; + /* check that no other channel with same parameters exists */ + if (smscore_find_client(coredev, params->data_type, + params->initial_id)) { + sms_err("Client already exist."); + return -EEXIST; + } + + newclient = kzalloc(sizeof(struct smscore_client_t), GFP_KERNEL); + if (!newclient) { + sms_err("Failed to allocate memory for client."); + return -ENOMEM; + } + + INIT_LIST_HEAD(&newclient->idlist); + newclient->coredev = coredev; + newclient->onresponse_handler = params->onresponse_handler; + newclient->onremove_handler = params->onremove_handler; + newclient->context = params->context; + list_add_locked(&newclient->entry, &coredev->clients, + &coredev->clientslock); + smscore_validate_client(coredev, newclient, params->data_type, + params->initial_id); + *client = newclient; + sms_debug("%p %d %d", params->context, params->data_type, + params->initial_id); + + return 0; +} +EXPORT_SYMBOL_GPL(smscore_register_client); + +/** + * frees smsclient object and all subclients associated with it + * + * @param client pointer to smsclient object returned by + * smscore_register_client + * + */ +void smscore_unregister_client(struct smscore_client_t *client) +{ + struct smscore_device_t *coredev = client->coredev; + unsigned long flags; + + spin_lock_irqsave(&coredev->clientslock, flags); + + + while (!list_empty(&client->idlist)) { + struct smscore_idlist_t *identry = + (struct smscore_idlist_t *) client->idlist.next; + list_del(&identry->entry); + kfree(identry); + } + + sms_info("%p", client->context); + + list_del(&client->entry); + kfree(client); + + spin_unlock_irqrestore(&coredev->clientslock, flags); +} +EXPORT_SYMBOL_GPL(smscore_unregister_client); + +/** + * verifies that source id is not taken by another client, + * calls device handler to send requests to the device + * + * @param client pointer to smsclient object returned by + * smscore_register_client + * @param buffer pointer to a request buffer + * @param size size (in bytes) of request buffer + * + * @return 0 on success, <0 on error. + */ +int smsclient_sendrequest(struct smscore_client_t *client, + void *buffer, size_t size) +{ + struct smscore_device_t *coredev; + struct sms_msg_hdr *phdr = (struct sms_msg_hdr *) buffer; + int rc; + + if (client == NULL) { + sms_err("Got NULL client"); + return -EINVAL; + } + + coredev = client->coredev; + + /* check that no other channel with same id exists */ + if (coredev == NULL) { + sms_err("Got NULL coredev"); + return -EINVAL; + } + + rc = smscore_validate_client(client->coredev, client, 0, + phdr->msg_src_id); + if (rc < 0) + return rc; + + return coredev->sendrequest_handler(coredev->context, buffer, size); +} +EXPORT_SYMBOL_GPL(smsclient_sendrequest); + + +/* old GPIO managements implementation */ +int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, + struct smscore_config_gpio *pinconfig) +{ + struct { + struct sms_msg_hdr hdr; + u32 data[6]; + } msg; + + if (coredev->device_flags & SMS_DEVICE_FAMILY2) { + msg.hdr.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + msg.hdr.msg_dst_id = HIF_TASK; + msg.hdr.msg_flags = 0; + msg.hdr.msg_type = MSG_SMS_GPIO_CONFIG_EX_REQ; + msg.hdr.msg_length = sizeof(msg); + + msg.data[0] = pin; + msg.data[1] = pinconfig->pullupdown; + + /* Convert slew rate for Nova: Fast(0) = 3 / Slow(1) = 0; */ + msg.data[2] = pinconfig->outputslewrate == 0 ? 3 : 0; + + switch (pinconfig->outputdriving) { + case SMS_GPIO_OUTPUTDRIVING_S_16mA: + msg.data[3] = 7; /* Nova - 16mA */ + break; + case SMS_GPIO_OUTPUTDRIVING_S_12mA: + msg.data[3] = 5; /* Nova - 11mA */ + break; + case SMS_GPIO_OUTPUTDRIVING_S_8mA: + msg.data[3] = 3; /* Nova - 7mA */ + break; + case SMS_GPIO_OUTPUTDRIVING_S_4mA: + default: + msg.data[3] = 2; /* Nova - 4mA */ + break; + } + + msg.data[4] = pinconfig->direction; + msg.data[5] = 0; + } else /* TODO: SMS_DEVICE_FAMILY1 */ + return -EINVAL; + + return coredev->sendrequest_handler(coredev->context, + &msg, sizeof(msg)); +} + +int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level) +{ + struct { + struct sms_msg_hdr hdr; + u32 data[3]; + } msg; + + if (pin > MAX_GPIO_PIN_NUMBER) + return -EINVAL; + + msg.hdr.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + msg.hdr.msg_dst_id = HIF_TASK; + msg.hdr.msg_flags = 0; + msg.hdr.msg_type = MSG_SMS_GPIO_SET_LEVEL_REQ; + msg.hdr.msg_length = sizeof(msg); + + msg.data[0] = pin; + msg.data[1] = level ? 1 : 0; + msg.data[2] = 0; + + return coredev->sendrequest_handler(coredev->context, + &msg, sizeof(msg)); +} + +/* new GPIO management implementation */ +static int get_gpio_pin_params(u32 pin_num, u32 *p_translatedpin_num, + u32 *p_group_num, u32 *p_group_cfg) { + + *p_group_cfg = 1; + + if (pin_num <= 1) { + *p_translatedpin_num = 0; + *p_group_num = 9; + *p_group_cfg = 2; + } else if (pin_num >= 2 && pin_num <= 6) { + *p_translatedpin_num = 2; + *p_group_num = 0; + *p_group_cfg = 2; + } else if (pin_num >= 7 && pin_num <= 11) { + *p_translatedpin_num = 7; + *p_group_num = 1; + } else if (pin_num >= 12 && pin_num <= 15) { + *p_translatedpin_num = 12; + *p_group_num = 2; + *p_group_cfg = 3; + } else if (pin_num == 16) { + *p_translatedpin_num = 16; + *p_group_num = 23; + } else if (pin_num >= 17 && pin_num <= 24) { + *p_translatedpin_num = 17; + *p_group_num = 3; + } else if (pin_num == 25) { + *p_translatedpin_num = 25; + *p_group_num = 6; + } else if (pin_num >= 26 && pin_num <= 28) { + *p_translatedpin_num = 26; + *p_group_num = 4; + } else if (pin_num == 29) { + *p_translatedpin_num = 29; + *p_group_num = 5; + *p_group_cfg = 2; + } else if (pin_num == 30) { + *p_translatedpin_num = 30; + *p_group_num = 8; + } else if (pin_num == 31) { + *p_translatedpin_num = 31; + *p_group_num = 17; + } else + return -1; + + *p_group_cfg <<= 24; + + return 0; +} + +int smscore_gpio_configure(struct smscore_device_t *coredev, u8 pin_num, + struct smscore_config_gpio *p_gpio_config) { + + u32 total_len; + u32 translatedpin_num = 0; + u32 group_num = 0; + u32 electric_char; + u32 group_cfg; + void *buffer; + int rc; + + struct set_gpio_msg { + struct sms_msg_hdr x_msg_header; + u32 msg_data[6]; + } *p_msg; + + + if (pin_num > MAX_GPIO_PIN_NUMBER) + return -EINVAL; + + if (p_gpio_config == NULL) + return -EINVAL; + + total_len = sizeof(struct sms_msg_hdr) + (sizeof(u32) * 6); + + buffer = kmalloc(total_len + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + if (!buffer) + return -ENOMEM; + + p_msg = (struct set_gpio_msg *) SMS_ALIGN_ADDRESS(buffer); + + p_msg->x_msg_header.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + p_msg->x_msg_header.msg_dst_id = HIF_TASK; + p_msg->x_msg_header.msg_flags = 0; + p_msg->x_msg_header.msg_length = (u16) total_len; + p_msg->msg_data[0] = pin_num; + + if (!(coredev->device_flags & SMS_DEVICE_FAMILY2)) { + p_msg->x_msg_header.msg_type = MSG_SMS_GPIO_CONFIG_REQ; + if (get_gpio_pin_params(pin_num, &translatedpin_num, &group_num, + &group_cfg) != 0) { + rc = -EINVAL; + goto free; + } + + p_msg->msg_data[1] = translatedpin_num; + p_msg->msg_data[2] = group_num; + electric_char = (p_gpio_config->pullupdown) + | (p_gpio_config->inputcharacteristics << 2) + | (p_gpio_config->outputslewrate << 3) + | (p_gpio_config->outputdriving << 4); + p_msg->msg_data[3] = electric_char; + p_msg->msg_data[4] = p_gpio_config->direction; + p_msg->msg_data[5] = group_cfg; + } else { + p_msg->x_msg_header.msg_type = MSG_SMS_GPIO_CONFIG_EX_REQ; + p_msg->msg_data[1] = p_gpio_config->pullupdown; + p_msg->msg_data[2] = p_gpio_config->outputslewrate; + p_msg->msg_data[3] = p_gpio_config->outputdriving; + p_msg->msg_data[4] = p_gpio_config->direction; + p_msg->msg_data[5] = 0; + } + + rc = smscore_sendrequest_and_wait(coredev, p_msg, total_len, + &coredev->gpio_configuration_done); + + if (rc != 0) { + if (rc == -ETIME) + sms_err("smscore_gpio_configure timeout"); + else + sms_err("smscore_gpio_configure error"); + } +free: + kfree(buffer); + + return rc; +} + +int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 pin_num, + u8 new_level) { + + u32 total_len; + int rc; + void *buffer; + + struct set_gpio_msg { + struct sms_msg_hdr x_msg_header; + u32 msg_data[3]; /* keep it 3 ! */ + } *p_msg; + + if ((new_level > 1) || (pin_num > MAX_GPIO_PIN_NUMBER)) + return -EINVAL; + + total_len = sizeof(struct sms_msg_hdr) + + (3 * sizeof(u32)); /* keep it 3 ! */ + + buffer = kmalloc(total_len + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + if (!buffer) + return -ENOMEM; + + p_msg = (struct set_gpio_msg *) SMS_ALIGN_ADDRESS(buffer); + + p_msg->x_msg_header.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + p_msg->x_msg_header.msg_dst_id = HIF_TASK; + p_msg->x_msg_header.msg_flags = 0; + p_msg->x_msg_header.msg_type = MSG_SMS_GPIO_SET_LEVEL_REQ; + p_msg->x_msg_header.msg_length = (u16) total_len; + p_msg->msg_data[0] = pin_num; + p_msg->msg_data[1] = new_level; + + /* Send message to SMS */ + rc = smscore_sendrequest_and_wait(coredev, p_msg, total_len, + &coredev->gpio_set_level_done); + + if (rc != 0) { + if (rc == -ETIME) + sms_err("smscore_gpio_set_level timeout"); + else + sms_err("smscore_gpio_set_level error"); + } + kfree(buffer); + + return rc; +} + +int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 pin_num, + u8 *level) { + + u32 total_len; + int rc; + void *buffer; + + struct set_gpio_msg { + struct sms_msg_hdr x_msg_header; + u32 msg_data[2]; + } *p_msg; + + + if (pin_num > MAX_GPIO_PIN_NUMBER) + return -EINVAL; + + total_len = sizeof(struct sms_msg_hdr) + (2 * sizeof(u32)); + + buffer = kmalloc(total_len + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + if (!buffer) + return -ENOMEM; + + p_msg = (struct set_gpio_msg *) SMS_ALIGN_ADDRESS(buffer); + + p_msg->x_msg_header.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + p_msg->x_msg_header.msg_dst_id = HIF_TASK; + p_msg->x_msg_header.msg_flags = 0; + p_msg->x_msg_header.msg_type = MSG_SMS_GPIO_GET_LEVEL_REQ; + p_msg->x_msg_header.msg_length = (u16) total_len; + p_msg->msg_data[0] = pin_num; + p_msg->msg_data[1] = 0; + + /* Send message to SMS */ + rc = smscore_sendrequest_and_wait(coredev, p_msg, total_len, + &coredev->gpio_get_level_done); + + if (rc != 0) { + if (rc == -ETIME) + sms_err("smscore_gpio_get_level timeout"); + else + sms_err("smscore_gpio_get_level error"); + } + kfree(buffer); + + /* Its a race between other gpio_get_level() and the copy of the single + * global 'coredev->gpio_get_res' to the function's variable 'level' + */ + *level = coredev->gpio_get_res; + + return rc; +} + +static int __init smscore_module_init(void) +{ + int rc = 0; + + INIT_LIST_HEAD(&g_smscore_notifyees); + INIT_LIST_HEAD(&g_smscore_devices); + kmutex_init(&g_smscore_deviceslock); + + INIT_LIST_HEAD(&g_smscore_registry); + kmutex_init(&g_smscore_registrylock); + + return rc; +} + +static void __exit smscore_module_exit(void) +{ + kmutex_lock(&g_smscore_deviceslock); + while (!list_empty(&g_smscore_notifyees)) { + struct smscore_device_notifyee_t *notifyee = + (struct smscore_device_notifyee_t *) + g_smscore_notifyees.next; + + list_del(¬ifyee->entry); + kfree(notifyee); + } + kmutex_unlock(&g_smscore_deviceslock); + + kmutex_lock(&g_smscore_registrylock); + while (!list_empty(&g_smscore_registry)) { + struct smscore_registry_entry_t *entry = + (struct smscore_registry_entry_t *) + g_smscore_registry.next; + + list_del(&entry->entry); + kfree(entry); + } + kmutex_unlock(&g_smscore_registrylock); + + sms_debug(""); +} + +module_init(smscore_module_init); +module_exit(smscore_module_exit); + +MODULE_DESCRIPTION("Siano MDTV Core module"); +MODULE_AUTHOR("Siano Mobile Silicon, Inc. (uris@siano-ms.com)"); +MODULE_LICENSE("GPL"); + +/* This should match what's defined at smscoreapi.h */ +MODULE_FIRMWARE(SMS_FW_ATSC_DENVER); +MODULE_FIRMWARE(SMS_FW_CMMB_MING_APP); +MODULE_FIRMWARE(SMS_FW_CMMB_VEGA_12MHZ); +MODULE_FIRMWARE(SMS_FW_CMMB_VENICE_12MHZ); +MODULE_FIRMWARE(SMS_FW_DVBH_RIO); +MODULE_FIRMWARE(SMS_FW_DVB_NOVA_12MHZ_B0); +MODULE_FIRMWARE(SMS_FW_DVB_NOVA_12MHZ); +MODULE_FIRMWARE(SMS_FW_DVB_RIO); +MODULE_FIRMWARE(SMS_FW_FM_RADIO); +MODULE_FIRMWARE(SMS_FW_FM_RADIO_RIO); +MODULE_FIRMWARE(SMS_FW_DVBT_HCW_55XXX); +MODULE_FIRMWARE(SMS_FW_ISDBT_HCW_55XXX); +MODULE_FIRMWARE(SMS_FW_ISDBT_NOVA_12MHZ_B0); +MODULE_FIRMWARE(SMS_FW_ISDBT_NOVA_12MHZ); +MODULE_FIRMWARE(SMS_FW_ISDBT_PELE); +MODULE_FIRMWARE(SMS_FW_ISDBT_RIO); +MODULE_FIRMWARE(SMS_FW_DVBT_NOVA_A); +MODULE_FIRMWARE(SMS_FW_DVBT_NOVA_B); +MODULE_FIRMWARE(SMS_FW_DVBT_STELLAR); +MODULE_FIRMWARE(SMS_FW_TDMB_DENVER); +MODULE_FIRMWARE(SMS_FW_TDMB_NOVA_12MHZ_B0); +MODULE_FIRMWARE(SMS_FW_TDMB_NOVA_12MHZ); diff --git a/drivers/media/common/siano/smscoreapi.h b/drivers/media/common/siano/smscoreapi.h new file mode 100644 index 00000000..d0799e32 --- /dev/null +++ b/drivers/media/common/siano/smscoreapi.h @@ -0,0 +1,1192 @@ +/**************************************************************** + +Siano Mobile Silicon, Inc. +MDTV receiver kernel modules. +Copyright (C) 2006-2008, Uri Shkolnik, Anatoly Greenblat + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + + This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +****************************************************************/ + +#ifndef __SMS_CORE_API_H__ +#define __SMS_CORE_API_H__ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "smsir.h" + +#define kmutex_init(_p_) mutex_init(_p_) +#define kmutex_lock(_p_) mutex_lock(_p_) +#define kmutex_trylock(_p_) mutex_trylock(_p_) +#define kmutex_unlock(_p_) mutex_unlock(_p_) + +/* + * Define the firmware names used by the driver. + * Those should match what's used at smscoreapi.c and sms-cards.c + * including the MODULE_FIRMWARE() macros at the end of smscoreapi.c + */ +#define SMS_FW_ATSC_DENVER "atsc_denver.inp" +#define SMS_FW_CMMB_MING_APP "cmmb_ming_app.inp" +#define SMS_FW_CMMB_VEGA_12MHZ "cmmb_vega_12mhz.inp" +#define SMS_FW_CMMB_VENICE_12MHZ "cmmb_venice_12mhz.inp" +#define SMS_FW_DVBH_RIO "dvbh_rio.inp" +#define SMS_FW_DVB_NOVA_12MHZ_B0 "dvb_nova_12mhz_b0.inp" +#define SMS_FW_DVB_NOVA_12MHZ "dvb_nova_12mhz.inp" +#define SMS_FW_DVB_RIO "dvb_rio.inp" +#define SMS_FW_FM_RADIO "fm_radio.inp" +#define SMS_FW_FM_RADIO_RIO "fm_radio_rio.inp" +#define SMS_FW_DVBT_HCW_55XXX "sms1xxx-hcw-55xxx-dvbt-02.fw" +#define SMS_FW_ISDBT_HCW_55XXX "sms1xxx-hcw-55xxx-isdbt-02.fw" +#define SMS_FW_ISDBT_NOVA_12MHZ_B0 "isdbt_nova_12mhz_b0.inp" +#define SMS_FW_ISDBT_NOVA_12MHZ "isdbt_nova_12mhz.inp" +#define SMS_FW_ISDBT_PELE "isdbt_pele.inp" +#define SMS_FW_ISDBT_RIO "isdbt_rio.inp" +#define SMS_FW_DVBT_NOVA_A "sms1xxx-nova-a-dvbt-01.fw" +#define SMS_FW_DVBT_NOVA_B "sms1xxx-nova-b-dvbt-01.fw" +#define SMS_FW_DVBT_STELLAR "sms1xxx-stellar-dvbt-01.fw" +#define SMS_FW_TDMB_DENVER "tdmb_denver.inp" +#define SMS_FW_TDMB_NOVA_12MHZ_B0 "tdmb_nova_12mhz_b0.inp" +#define SMS_FW_TDMB_NOVA_12MHZ "tdmb_nova_12mhz.inp" + +#define SMS_PROTOCOL_MAX_RAOUNDTRIP_MS (10000) +#define SMS_ALLOC_ALIGNMENT 128 +#define SMS_DMA_ALIGNMENT 16 +#define SMS_ALIGN_ADDRESS(addr) \ + ((((uintptr_t)(addr)) + (SMS_DMA_ALIGNMENT-1)) & ~(SMS_DMA_ALIGNMENT-1)) + +#define SMS_DEVICE_FAMILY1 0 +#define SMS_DEVICE_FAMILY2 1 +#define SMS_ROM_NO_RESPONSE 2 +#define SMS_DEVICE_NOT_READY 0x8000000 + +enum sms_device_type_st { + SMS_UNKNOWN_TYPE = -1, + SMS_STELLAR = 0, + SMS_NOVA_A0, + SMS_NOVA_B0, + SMS_VEGA, + SMS_VENICE, + SMS_MING, + SMS_PELE, + SMS_RIO, + SMS_DENVER_1530, + SMS_DENVER_2160, + SMS_NUM_OF_DEVICE_TYPES +}; + +enum sms_power_mode_st { + SMS_POWER_MODE_ACTIVE, + SMS_POWER_MODE_SUSPENDED +}; + +struct smscore_device_t; +struct smscore_client_t; +struct smscore_buffer_t; + +typedef int (*hotplug_t)(struct smscore_device_t *coredev, + struct device *device, int arrival); + +typedef int (*setmode_t)(void *context, int mode); +typedef void (*detectmode_t)(void *context, int *mode); +typedef int (*sendrequest_t)(void *context, void *buffer, size_t size); +typedef int (*loadfirmware_t)(void *context, void *buffer, size_t size); +typedef int (*preload_t)(void *context); +typedef int (*postload_t)(void *context); + +typedef int (*onresponse_t)(void *context, struct smscore_buffer_t *cb); +typedef void (*onremove_t)(void *context); + +struct smscore_buffer_t { + /* public members, once passed to clients can be changed freely */ + struct list_head entry; + int size; + int offset; + + /* private members, read-only for clients */ + void *p; + dma_addr_t phys; + unsigned long offset_in_common; +}; + +struct smsdevice_params_t { + struct device *device; + + int buffer_size; + int num_buffers; + + char devpath[32]; + unsigned long flags; + + setmode_t setmode_handler; + detectmode_t detectmode_handler; + sendrequest_t sendrequest_handler; + preload_t preload_handler; + postload_t postload_handler; + + void *context; + enum sms_device_type_st device_type; +}; + +struct smsclient_params_t { + int initial_id; + int data_type; + onresponse_t onresponse_handler; + onremove_t onremove_handler; + void *context; +}; + +struct smscore_device_t { + struct list_head entry; + + struct list_head clients; + struct list_head subclients; + spinlock_t clientslock; + + struct list_head buffers; + spinlock_t bufferslock; + int num_buffers; + + void *common_buffer; + int common_buffer_size; + dma_addr_t common_buffer_phys; + + void *context; + struct device *device; + + char devpath[32]; + unsigned long device_flags; + + setmode_t setmode_handler; + detectmode_t detectmode_handler; + sendrequest_t sendrequest_handler; + preload_t preload_handler; + postload_t postload_handler; + + int mode, modes_supported; + + /* host <--> device messages */ + struct completion version_ex_done, data_download_done, trigger_done; + struct completion data_validity_done, device_ready_done; + struct completion init_device_done, reload_start_done, resume_done; + struct completion gpio_configuration_done, gpio_set_level_done; + struct completion gpio_get_level_done, ir_init_done; + + /* Buffer management */ + wait_queue_head_t buffer_mng_waitq; + + /* GPIO */ + int gpio_get_res; + + /* Target hardware board */ + int board_id; + + /* Firmware */ + u8 *fw_buf; + u32 fw_buf_size; + u16 fw_version; + + /* Infrared (IR) */ + struct ir_t ir; + + /* + * Identify if device is USB or not. + * Used by smsdvb-sysfs to know the root node for debugfs + */ + bool is_usb_device; + + int led_state; +}; + +/* GPIO definitions for antenna frequency domain control (SMS8021) */ +#define SMS_ANTENNA_GPIO_0 1 +#define SMS_ANTENNA_GPIO_1 0 + +enum sms_bandwidth_mode { + BW_8_MHZ = 0, + BW_7_MHZ = 1, + BW_6_MHZ = 2, + BW_5_MHZ = 3, + BW_ISDBT_1SEG = 4, + BW_ISDBT_3SEG = 5, + BW_2_MHZ = 6, + BW_FM_RADIO = 7, + BW_ISDBT_13SEG = 8, + BW_1_5_MHZ = 15, + BW_UNKNOWN = 0xffff +}; + + +#define MSG_HDR_FLAG_SPLIT_MSG 4 + +#define MAX_GPIO_PIN_NUMBER 31 + +#define HIF_TASK 11 +#define HIF_TASK_SLAVE 22 +#define HIF_TASK_SLAVE2 33 +#define HIF_TASK_SLAVE3 44 +#define SMS_HOST_LIB 150 +#define DVBT_BDA_CONTROL_MSG_ID 201 + +#define SMS_MAX_PAYLOAD_SIZE 240 +#define SMS_TUNE_TIMEOUT 500 + +enum msg_types { + MSG_TYPE_BASE_VAL = 500, + MSG_SMS_GET_VERSION_REQ = 503, + MSG_SMS_GET_VERSION_RES = 504, + MSG_SMS_MULTI_BRIDGE_CFG = 505, + MSG_SMS_GPIO_CONFIG_REQ = 507, + MSG_SMS_GPIO_CONFIG_RES = 508, + MSG_SMS_GPIO_SET_LEVEL_REQ = 509, + MSG_SMS_GPIO_SET_LEVEL_RES = 510, + MSG_SMS_GPIO_GET_LEVEL_REQ = 511, + MSG_SMS_GPIO_GET_LEVEL_RES = 512, + MSG_SMS_EEPROM_BURN_IND = 513, + MSG_SMS_LOG_ENABLE_CHANGE_REQ = 514, + MSG_SMS_LOG_ENABLE_CHANGE_RES = 515, + MSG_SMS_SET_MAX_TX_MSG_LEN_REQ = 516, + MSG_SMS_SET_MAX_TX_MSG_LEN_RES = 517, + MSG_SMS_SPI_HALFDUPLEX_TOKEN_HOST_TO_DEVICE = 518, + MSG_SMS_SPI_HALFDUPLEX_TOKEN_DEVICE_TO_HOST = 519, + MSG_SMS_BACKGROUND_SCAN_FLAG_CHANGE_REQ = 520, + MSG_SMS_BACKGROUND_SCAN_FLAG_CHANGE_RES = 521, + MSG_SMS_BACKGROUND_SCAN_SIGNAL_DETECTED_IND = 522, + MSG_SMS_BACKGROUND_SCAN_NO_SIGNAL_IND = 523, + MSG_SMS_CONFIGURE_RF_SWITCH_REQ = 524, + MSG_SMS_CONFIGURE_RF_SWITCH_RES = 525, + MSG_SMS_MRC_PATH_DISCONNECT_REQ = 526, + MSG_SMS_MRC_PATH_DISCONNECT_RES = 527, + MSG_SMS_RECEIVE_1SEG_THROUGH_FULLSEG_REQ = 528, + MSG_SMS_RECEIVE_1SEG_THROUGH_FULLSEG_RES = 529, + MSG_SMS_RECEIVE_VHF_VIA_VHF_INPUT_REQ = 530, + MSG_SMS_RECEIVE_VHF_VIA_VHF_INPUT_RES = 531, + MSG_WR_REG_RFT_REQ = 533, + MSG_WR_REG_RFT_RES = 534, + MSG_RD_REG_RFT_REQ = 535, + MSG_RD_REG_RFT_RES = 536, + MSG_RD_REG_ALL_RFT_REQ = 537, + MSG_RD_REG_ALL_RFT_RES = 538, + MSG_HELP_INT = 539, + MSG_RUN_SCRIPT_INT = 540, + MSG_SMS_EWS_INBAND_REQ = 541, + MSG_SMS_EWS_INBAND_RES = 542, + MSG_SMS_RFS_SELECT_REQ = 543, + MSG_SMS_RFS_SELECT_RES = 544, + MSG_SMS_MB_GET_VER_REQ = 545, + MSG_SMS_MB_GET_VER_RES = 546, + MSG_SMS_MB_WRITE_CFGFILE_REQ = 547, + MSG_SMS_MB_WRITE_CFGFILE_RES = 548, + MSG_SMS_MB_READ_CFGFILE_REQ = 549, + MSG_SMS_MB_READ_CFGFILE_RES = 550, + MSG_SMS_RD_MEM_REQ = 552, + MSG_SMS_RD_MEM_RES = 553, + MSG_SMS_WR_MEM_REQ = 554, + MSG_SMS_WR_MEM_RES = 555, + MSG_SMS_UPDATE_MEM_REQ = 556, + MSG_SMS_UPDATE_MEM_RES = 557, + MSG_SMS_ISDBT_ENABLE_FULL_PARAMS_SET_REQ = 558, + MSG_SMS_ISDBT_ENABLE_FULL_PARAMS_SET_RES = 559, + MSG_SMS_RF_TUNE_REQ = 561, + MSG_SMS_RF_TUNE_RES = 562, + MSG_SMS_ISDBT_ENABLE_HIGH_MOBILITY_REQ = 563, + MSG_SMS_ISDBT_ENABLE_HIGH_MOBILITY_RES = 564, + MSG_SMS_ISDBT_SB_RECEPTION_REQ = 565, + MSG_SMS_ISDBT_SB_RECEPTION_RES = 566, + MSG_SMS_GENERIC_EPROM_WRITE_REQ = 567, + MSG_SMS_GENERIC_EPROM_WRITE_RES = 568, + MSG_SMS_GENERIC_EPROM_READ_REQ = 569, + MSG_SMS_GENERIC_EPROM_READ_RES = 570, + MSG_SMS_EEPROM_WRITE_REQ = 571, + MSG_SMS_EEPROM_WRITE_RES = 572, + MSG_SMS_CUSTOM_READ_REQ = 574, + MSG_SMS_CUSTOM_READ_RES = 575, + MSG_SMS_CUSTOM_WRITE_REQ = 576, + MSG_SMS_CUSTOM_WRITE_RES = 577, + MSG_SMS_INIT_DEVICE_REQ = 578, + MSG_SMS_INIT_DEVICE_RES = 579, + MSG_SMS_ATSC_SET_ALL_IP_REQ = 580, + MSG_SMS_ATSC_SET_ALL_IP_RES = 581, + MSG_SMS_ATSC_START_ENSEMBLE_REQ = 582, + MSG_SMS_ATSC_START_ENSEMBLE_RES = 583, + MSG_SMS_SET_OUTPUT_MODE_REQ = 584, + MSG_SMS_SET_OUTPUT_MODE_RES = 585, + MSG_SMS_ATSC_IP_FILTER_GET_LIST_REQ = 586, + MSG_SMS_ATSC_IP_FILTER_GET_LIST_RES = 587, + MSG_SMS_SUB_CHANNEL_START_REQ = 589, + MSG_SMS_SUB_CHANNEL_START_RES = 590, + MSG_SMS_SUB_CHANNEL_STOP_REQ = 591, + MSG_SMS_SUB_CHANNEL_STOP_RES = 592, + MSG_SMS_ATSC_IP_FILTER_ADD_REQ = 593, + MSG_SMS_ATSC_IP_FILTER_ADD_RES = 594, + MSG_SMS_ATSC_IP_FILTER_REMOVE_REQ = 595, + MSG_SMS_ATSC_IP_FILTER_REMOVE_RES = 596, + MSG_SMS_ATSC_IP_FILTER_REMOVE_ALL_REQ = 597, + MSG_SMS_ATSC_IP_FILTER_REMOVE_ALL_RES = 598, + MSG_SMS_WAIT_CMD = 599, + MSG_SMS_ADD_PID_FILTER_REQ = 601, + MSG_SMS_ADD_PID_FILTER_RES = 602, + MSG_SMS_REMOVE_PID_FILTER_REQ = 603, + MSG_SMS_REMOVE_PID_FILTER_RES = 604, + MSG_SMS_FAST_INFORMATION_CHANNEL_REQ = 605, + MSG_SMS_FAST_INFORMATION_CHANNEL_RES = 606, + MSG_SMS_DAB_CHANNEL = 607, + MSG_SMS_GET_PID_FILTER_LIST_REQ = 608, + MSG_SMS_GET_PID_FILTER_LIST_RES = 609, + MSG_SMS_POWER_DOWN_REQ = 610, + MSG_SMS_POWER_DOWN_RES = 611, + MSG_SMS_ATSC_SLT_EXIST_IND = 612, + MSG_SMS_ATSC_NO_SLT_IND = 613, + MSG_SMS_GET_STATISTICS_REQ = 615, + MSG_SMS_GET_STATISTICS_RES = 616, + MSG_SMS_SEND_DUMP = 617, + MSG_SMS_SCAN_START_REQ = 618, + MSG_SMS_SCAN_START_RES = 619, + MSG_SMS_SCAN_STOP_REQ = 620, + MSG_SMS_SCAN_STOP_RES = 621, + MSG_SMS_SCAN_PROGRESS_IND = 622, + MSG_SMS_SCAN_COMPLETE_IND = 623, + MSG_SMS_LOG_ITEM = 624, + MSG_SMS_DAB_SUBCHANNEL_RECONFIG_REQ = 628, + MSG_SMS_DAB_SUBCHANNEL_RECONFIG_RES = 629, + MSG_SMS_HO_PER_SLICES_IND = 630, + MSG_SMS_HO_INBAND_POWER_IND = 631, + MSG_SMS_MANUAL_DEMOD_REQ = 632, + MSG_SMS_HO_TUNE_ON_REQ = 636, + MSG_SMS_HO_TUNE_ON_RES = 637, + MSG_SMS_HO_TUNE_OFF_REQ = 638, + MSG_SMS_HO_TUNE_OFF_RES = 639, + MSG_SMS_HO_PEEK_FREQ_REQ = 640, + MSG_SMS_HO_PEEK_FREQ_RES = 641, + MSG_SMS_HO_PEEK_FREQ_IND = 642, + MSG_SMS_MB_ATTEN_SET_REQ = 643, + MSG_SMS_MB_ATTEN_SET_RES = 644, + MSG_SMS_ENABLE_STAT_IN_I2C_REQ = 649, + MSG_SMS_ENABLE_STAT_IN_I2C_RES = 650, + MSG_SMS_SET_ANTENNA_CONFIG_REQ = 651, + MSG_SMS_SET_ANTENNA_CONFIG_RES = 652, + MSG_SMS_GET_STATISTICS_EX_REQ = 653, + MSG_SMS_GET_STATISTICS_EX_RES = 654, + MSG_SMS_SLEEP_RESUME_COMP_IND = 655, + MSG_SMS_SWITCH_HOST_INTERFACE_REQ = 656, + MSG_SMS_SWITCH_HOST_INTERFACE_RES = 657, + MSG_SMS_DATA_DOWNLOAD_REQ = 660, + MSG_SMS_DATA_DOWNLOAD_RES = 661, + MSG_SMS_DATA_VALIDITY_REQ = 662, + MSG_SMS_DATA_VALIDITY_RES = 663, + MSG_SMS_SWDOWNLOAD_TRIGGER_REQ = 664, + MSG_SMS_SWDOWNLOAD_TRIGGER_RES = 665, + MSG_SMS_SWDOWNLOAD_BACKDOOR_REQ = 666, + MSG_SMS_SWDOWNLOAD_BACKDOOR_RES = 667, + MSG_SMS_GET_VERSION_EX_REQ = 668, + MSG_SMS_GET_VERSION_EX_RES = 669, + MSG_SMS_CLOCK_OUTPUT_CONFIG_REQ = 670, + MSG_SMS_CLOCK_OUTPUT_CONFIG_RES = 671, + MSG_SMS_I2C_SET_FREQ_REQ = 685, + MSG_SMS_I2C_SET_FREQ_RES = 686, + MSG_SMS_GENERIC_I2C_REQ = 687, + MSG_SMS_GENERIC_I2C_RES = 688, + MSG_SMS_DVBT_BDA_DATA = 693, + MSG_SW_RELOAD_REQ = 697, + MSG_SMS_DATA_MSG = 699, + MSG_TABLE_UPLOAD_REQ = 700, + MSG_TABLE_UPLOAD_RES = 701, + MSG_SW_RELOAD_START_REQ = 702, + MSG_SW_RELOAD_START_RES = 703, + MSG_SW_RELOAD_EXEC_REQ = 704, + MSG_SW_RELOAD_EXEC_RES = 705, + MSG_SMS_SPI_INT_LINE_SET_REQ = 710, + MSG_SMS_SPI_INT_LINE_SET_RES = 711, + MSG_SMS_GPIO_CONFIG_EX_REQ = 712, + MSG_SMS_GPIO_CONFIG_EX_RES = 713, + MSG_SMS_WATCHDOG_ACT_REQ = 716, + MSG_SMS_WATCHDOG_ACT_RES = 717, + MSG_SMS_LOOPBACK_REQ = 718, + MSG_SMS_LOOPBACK_RES = 719, + MSG_SMS_RAW_CAPTURE_START_REQ = 720, + MSG_SMS_RAW_CAPTURE_START_RES = 721, + MSG_SMS_RAW_CAPTURE_ABORT_REQ = 722, + MSG_SMS_RAW_CAPTURE_ABORT_RES = 723, + MSG_SMS_RAW_CAPTURE_COMPLETE_IND = 728, + MSG_SMS_DATA_PUMP_IND = 729, + MSG_SMS_DATA_PUMP_REQ = 730, + MSG_SMS_DATA_PUMP_RES = 731, + MSG_SMS_FLASH_DL_REQ = 732, + MSG_SMS_EXEC_TEST_1_REQ = 734, + MSG_SMS_EXEC_TEST_1_RES = 735, + MSG_SMS_ENBALE_TS_INTERFACE_REQ = 736, + MSG_SMS_ENBALE_TS_INTERFACE_RES = 737, + MSG_SMS_SPI_SET_BUS_WIDTH_REQ = 738, + MSG_SMS_SPI_SET_BUS_WIDTH_RES = 739, + MSG_SMS_SEND_EMM_REQ = 740, + MSG_SMS_SEND_EMM_RES = 741, + MSG_SMS_DISABLE_TS_INTERFACE_REQ = 742, + MSG_SMS_DISABLE_TS_INTERFACE_RES = 743, + MSG_SMS_IS_BUF_FREE_REQ = 744, + MSG_SMS_IS_BUF_FREE_RES = 745, + MSG_SMS_EXT_ANTENNA_REQ = 746, + MSG_SMS_EXT_ANTENNA_RES = 747, + MSG_SMS_CMMB_GET_NET_OF_FREQ_REQ_OBSOLETE = 748, + MSG_SMS_CMMB_GET_NET_OF_FREQ_RES_OBSOLETE = 749, + MSG_SMS_BATTERY_LEVEL_REQ = 750, + MSG_SMS_BATTERY_LEVEL_RES = 751, + MSG_SMS_CMMB_INJECT_TABLE_REQ_OBSOLETE = 752, + MSG_SMS_CMMB_INJECT_TABLE_RES_OBSOLETE = 753, + MSG_SMS_FM_RADIO_BLOCK_IND = 754, + MSG_SMS_HOST_NOTIFICATION_IND = 755, + MSG_SMS_CMMB_GET_CONTROL_TABLE_REQ_OBSOLETE = 756, + MSG_SMS_CMMB_GET_CONTROL_TABLE_RES_OBSOLETE = 757, + MSG_SMS_CMMB_GET_NETWORKS_REQ = 760, + MSG_SMS_CMMB_GET_NETWORKS_RES = 761, + MSG_SMS_CMMB_START_SERVICE_REQ = 762, + MSG_SMS_CMMB_START_SERVICE_RES = 763, + MSG_SMS_CMMB_STOP_SERVICE_REQ = 764, + MSG_SMS_CMMB_STOP_SERVICE_RES = 765, + MSG_SMS_CMMB_ADD_CHANNEL_FILTER_REQ = 768, + MSG_SMS_CMMB_ADD_CHANNEL_FILTER_RES = 769, + MSG_SMS_CMMB_REMOVE_CHANNEL_FILTER_REQ = 770, + MSG_SMS_CMMB_REMOVE_CHANNEL_FILTER_RES = 771, + MSG_SMS_CMMB_START_CONTROL_INFO_REQ = 772, + MSG_SMS_CMMB_START_CONTROL_INFO_RES = 773, + MSG_SMS_CMMB_STOP_CONTROL_INFO_REQ = 774, + MSG_SMS_CMMB_STOP_CONTROL_INFO_RES = 775, + MSG_SMS_ISDBT_TUNE_REQ = 776, + MSG_SMS_ISDBT_TUNE_RES = 777, + MSG_SMS_TRANSMISSION_IND = 782, + MSG_SMS_PID_STATISTICS_IND = 783, + MSG_SMS_POWER_DOWN_IND = 784, + MSG_SMS_POWER_DOWN_CONF = 785, + MSG_SMS_POWER_UP_IND = 786, + MSG_SMS_POWER_UP_CONF = 787, + MSG_SMS_POWER_MODE_SET_REQ = 790, + MSG_SMS_POWER_MODE_SET_RES = 791, + MSG_SMS_DEBUG_HOST_EVENT_REQ = 792, + MSG_SMS_DEBUG_HOST_EVENT_RES = 793, + MSG_SMS_NEW_CRYSTAL_REQ = 794, + MSG_SMS_NEW_CRYSTAL_RES = 795, + MSG_SMS_CONFIG_SPI_REQ = 796, + MSG_SMS_CONFIG_SPI_RES = 797, + MSG_SMS_I2C_SHORT_STAT_IND = 798, + MSG_SMS_START_IR_REQ = 800, + MSG_SMS_START_IR_RES = 801, + MSG_SMS_IR_SAMPLES_IND = 802, + MSG_SMS_CMMB_CA_SERVICE_IND = 803, + MSG_SMS_SLAVE_DEVICE_DETECTED = 804, + MSG_SMS_INTERFACE_LOCK_IND = 805, + MSG_SMS_INTERFACE_UNLOCK_IND = 806, + MSG_SMS_SEND_ROSUM_BUFF_REQ = 810, + MSG_SMS_SEND_ROSUM_BUFF_RES = 811, + MSG_SMS_ROSUM_BUFF = 812, + MSG_SMS_SET_AES128_KEY_REQ = 815, + MSG_SMS_SET_AES128_KEY_RES = 816, + MSG_SMS_MBBMS_WRITE_REQ = 817, + MSG_SMS_MBBMS_WRITE_RES = 818, + MSG_SMS_MBBMS_READ_IND = 819, + MSG_SMS_IQ_STREAM_START_REQ = 820, + MSG_SMS_IQ_STREAM_START_RES = 821, + MSG_SMS_IQ_STREAM_STOP_REQ = 822, + MSG_SMS_IQ_STREAM_STOP_RES = 823, + MSG_SMS_IQ_STREAM_DATA_BLOCK = 824, + MSG_SMS_GET_EEPROM_VERSION_REQ = 825, + MSG_SMS_GET_EEPROM_VERSION_RES = 826, + MSG_SMS_SIGNAL_DETECTED_IND = 827, + MSG_SMS_NO_SIGNAL_IND = 828, + MSG_SMS_MRC_SHUTDOWN_SLAVE_REQ = 830, + MSG_SMS_MRC_SHUTDOWN_SLAVE_RES = 831, + MSG_SMS_MRC_BRINGUP_SLAVE_REQ = 832, + MSG_SMS_MRC_BRINGUP_SLAVE_RES = 833, + MSG_SMS_EXTERNAL_LNA_CTRL_REQ = 834, + MSG_SMS_EXTERNAL_LNA_CTRL_RES = 835, + MSG_SMS_SET_PERIODIC_STATISTICS_REQ = 836, + MSG_SMS_SET_PERIODIC_STATISTICS_RES = 837, + MSG_SMS_CMMB_SET_AUTO_OUTPUT_TS0_REQ = 838, + MSG_SMS_CMMB_SET_AUTO_OUTPUT_TS0_RES = 839, + LOCAL_TUNE = 850, + LOCAL_IFFT_H_ICI = 851, + MSG_RESYNC_REQ = 852, + MSG_SMS_CMMB_GET_MRC_STATISTICS_REQ = 853, + MSG_SMS_CMMB_GET_MRC_STATISTICS_RES = 854, + MSG_SMS_LOG_EX_ITEM = 855, + MSG_SMS_DEVICE_DATA_LOSS_IND = 856, + MSG_SMS_MRC_WATCHDOG_TRIGGERED_IND = 857, + MSG_SMS_USER_MSG_REQ = 858, + MSG_SMS_USER_MSG_RES = 859, + MSG_SMS_SMART_CARD_INIT_REQ = 860, + MSG_SMS_SMART_CARD_INIT_RES = 861, + MSG_SMS_SMART_CARD_WRITE_REQ = 862, + MSG_SMS_SMART_CARD_WRITE_RES = 863, + MSG_SMS_SMART_CARD_READ_IND = 864, + MSG_SMS_TSE_ENABLE_REQ = 866, + MSG_SMS_TSE_ENABLE_RES = 867, + MSG_SMS_CMMB_GET_SHORT_STATISTICS_REQ = 868, + MSG_SMS_CMMB_GET_SHORT_STATISTICS_RES = 869, + MSG_SMS_LED_CONFIG_REQ = 870, + MSG_SMS_LED_CONFIG_RES = 871, + MSG_PWM_ANTENNA_REQ = 872, + MSG_PWM_ANTENNA_RES = 873, + MSG_SMS_CMMB_SMD_SN_REQ = 874, + MSG_SMS_CMMB_SMD_SN_RES = 875, + MSG_SMS_CMMB_SET_CA_CW_REQ = 876, + MSG_SMS_CMMB_SET_CA_CW_RES = 877, + MSG_SMS_CMMB_SET_CA_SALT_REQ = 878, + MSG_SMS_CMMB_SET_CA_SALT_RES = 879, + MSG_SMS_NSCD_INIT_REQ = 880, + MSG_SMS_NSCD_INIT_RES = 881, + MSG_SMS_NSCD_PROCESS_SECTION_REQ = 882, + MSG_SMS_NSCD_PROCESS_SECTION_RES = 883, + MSG_SMS_DBD_CREATE_OBJECT_REQ = 884, + MSG_SMS_DBD_CREATE_OBJECT_RES = 885, + MSG_SMS_DBD_CONFIGURE_REQ = 886, + MSG_SMS_DBD_CONFIGURE_RES = 887, + MSG_SMS_DBD_SET_KEYS_REQ = 888, + MSG_SMS_DBD_SET_KEYS_RES = 889, + MSG_SMS_DBD_PROCESS_HEADER_REQ = 890, + MSG_SMS_DBD_PROCESS_HEADER_RES = 891, + MSG_SMS_DBD_PROCESS_DATA_REQ = 892, + MSG_SMS_DBD_PROCESS_DATA_RES = 893, + MSG_SMS_DBD_PROCESS_GET_DATA_REQ = 894, + MSG_SMS_DBD_PROCESS_GET_DATA_RES = 895, + MSG_SMS_NSCD_OPEN_SESSION_REQ = 896, + MSG_SMS_NSCD_OPEN_SESSION_RES = 897, + MSG_SMS_SEND_HOST_DATA_TO_DEMUX_REQ = 898, + MSG_SMS_SEND_HOST_DATA_TO_DEMUX_RES = 899, + MSG_LAST_MSG_TYPE = 900, +}; + +#define SMS_INIT_MSG_EX(ptr, type, src, dst, len) do { \ + (ptr)->msg_type = type; \ + (ptr)->msg_src_id = src; \ + (ptr)->msg_dst_id = dst; \ + (ptr)->msg_length = len; \ + (ptr)->msg_flags = 0; \ +} while (0) + +#define SMS_INIT_MSG(ptr, type, len) \ + SMS_INIT_MSG_EX(ptr, type, 0, HIF_TASK, len) + +enum SMS_DVB3_EVENTS { + DVB3_EVENT_INIT = 0, + DVB3_EVENT_SLEEP, + DVB3_EVENT_HOTPLUG, + DVB3_EVENT_FE_LOCK, + DVB3_EVENT_FE_UNLOCK, + DVB3_EVENT_UNC_OK, + DVB3_EVENT_UNC_ERR +}; + +enum SMS_DEVICE_MODE { + DEVICE_MODE_NONE = -1, + DEVICE_MODE_DVBT = 0, + DEVICE_MODE_DVBH, + DEVICE_MODE_DAB_TDMB, + DEVICE_MODE_DAB_TDMB_DABIP, + DEVICE_MODE_DVBT_BDA, + DEVICE_MODE_ISDBT, + DEVICE_MODE_ISDBT_BDA, + DEVICE_MODE_CMMB, + DEVICE_MODE_RAW_TUNER, + DEVICE_MODE_FM_RADIO, + DEVICE_MODE_FM_RADIO_BDA, + DEVICE_MODE_ATSC, + DEVICE_MODE_MAX, +}; + +struct sms_msg_hdr { + u16 msg_type; + u8 msg_src_id; + u8 msg_dst_id; + u16 msg_length; /* length of entire message, including header */ + u16 msg_flags; +}; + +struct sms_msg_data { + struct sms_msg_hdr x_msg_header; + u32 msg_data[1]; +}; + +struct sms_msg_data2 { + struct sms_msg_hdr x_msg_header; + u32 msg_data[2]; +}; + +struct sms_msg_data4 { + struct sms_msg_hdr x_msg_header; + u32 msg_data[4]; +}; + +struct sms_data_download { + struct sms_msg_hdr x_msg_header; + u32 mem_addr; + u8 payload[SMS_MAX_PAYLOAD_SIZE]; +}; + +struct sms_version_res { + struct sms_msg_hdr x_msg_header; + + u16 chip_model; /* e.g. 0x1102 for SMS-1102 "Nova" */ + u8 step; /* 0 - step A */ + u8 metal_fix; /* 0 - Metal 0 */ + + /* firmware_id 0xFF if ROM, otherwise the + * value indicated by SMSHOSTLIB_DEVICE_MODES_E */ + u8 firmware_id; + /* supported_protocols Bitwise OR combination of + * supported protocols */ + u8 supported_protocols; + + u8 version_major; + u8 version_minor; + u8 version_patch; + u8 version_field_patch; + + u8 rom_ver_major; + u8 rom_ver_minor; + u8 rom_ver_patch; + u8 rom_ver_field_patch; + + u8 TextLabel[34]; +}; + +struct sms_firmware { + u32 check_sum; + u32 length; + u32 start_address; + u8 payload[1]; +}; + +/* statistics information returned as response for + * SmsHostApiGetstatistics_Req */ +struct sms_stats { + u32 reserved; /* reserved */ + + /* Common parameters */ + u32 is_rf_locked; /* 0 - not locked, 1 - locked */ + u32 is_demod_locked; /* 0 - not locked, 1 - locked */ + u32 is_external_lna_on; /* 0 - external LNA off, 1 - external LNA on */ + + /* Reception quality */ + s32 SNR; /* dB */ + u32 ber; /* Post Viterbi ber [1E-5] */ + u32 FIB_CRC; /* CRC errors percentage, valid only for DAB */ + u32 ts_per; /* Transport stream PER, + 0xFFFFFFFF indicate N/A, valid only for DVB-T/H */ + u32 MFER; /* DVB-H frame error rate in percentage, + 0xFFFFFFFF indicate N/A, valid only for DVB-H */ + s32 RSSI; /* dBm */ + s32 in_band_pwr; /* In band power in dBM */ + s32 carrier_offset; /* Carrier Offset in bin/1024 */ + + /* Transmission parameters */ + u32 frequency; /* frequency in Hz */ + u32 bandwidth; /* bandwidth in MHz, valid only for DVB-T/H */ + u32 transmission_mode; /* Transmission Mode, for DAB modes 1-4, + for DVB-T/H FFT mode carriers in Kilos */ + u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET, + valid only for DVB-T/H */ + u32 guard_interval; /* Guard Interval from + SMSHOSTLIB_GUARD_INTERVALS_ET, valid only for DVB-T/H */ + u32 code_rate; /* Code Rate from SMSHOSTLIB_CODE_RATE_ET, + valid only for DVB-T/H */ + u32 lp_code_rate; /* Low Priority Code Rate from + SMSHOSTLIB_CODE_RATE_ET, valid only for DVB-T/H */ + u32 hierarchy; /* hierarchy from SMSHOSTLIB_HIERARCHY_ET, + valid only for DVB-T/H */ + u32 constellation; /* constellation from + SMSHOSTLIB_CONSTELLATION_ET, valid only for DVB-T/H */ + + /* Burst parameters, valid only for DVB-H */ + u32 burst_size; /* Current burst size in bytes, + valid only for DVB-H */ + u32 burst_duration; /* Current burst duration in mSec, + valid only for DVB-H */ + u32 burst_cycle_time; /* Current burst cycle time in mSec, + valid only for DVB-H */ + u32 calc_burst_cycle_time;/* Current burst cycle time in mSec, + as calculated by demodulator, valid only for DVB-H */ + u32 num_of_rows; /* Number of rows in MPE table, + valid only for DVB-H */ + u32 num_of_padd_cols; /* Number of padding columns in MPE table, + valid only for DVB-H */ + u32 num_of_punct_cols; /* Number of puncturing columns in MPE table, + valid only for DVB-H */ + u32 error_ts_packets; /* Number of erroneous + transport-stream packets */ + u32 total_ts_packets; /* Total number of transport-stream packets */ + u32 num_of_valid_mpe_tlbs; /* Number of MPE tables which do not include + errors after MPE RS decoding */ + u32 num_of_invalid_mpe_tlbs;/* Number of MPE tables which include errors + after MPE RS decoding */ + u32 num_of_corrected_mpe_tlbs;/* Number of MPE tables which were + corrected by MPE RS decoding */ + /* Common params */ + u32 ber_error_count; /* Number of errornous SYNC bits. */ + u32 ber_bit_count; /* Total number of SYNC bits. */ + + /* Interface information */ + u32 sms_to_host_tx_errors; /* Total number of transmission errors. */ + + /* DAB/T-DMB */ + u32 pre_ber; /* DAB/T-DMB only: Pre Viterbi ber [1E-5] */ + + /* DVB-H TPS parameters */ + u32 cell_id; /* TPS Cell ID in bits 15..0, bits 31..16 zero; + if set to 0xFFFFFFFF cell_id not yet recovered */ + u32 dvbh_srv_ind_hp; /* DVB-H service indication info, bit 1 - + Time Slicing indicator, bit 0 - MPE-FEC indicator */ + u32 dvbh_srv_ind_lp; /* DVB-H service indication info, bit 1 - + Time Slicing indicator, bit 0 - MPE-FEC indicator */ + + u32 num_mpe_received; /* DVB-H, Num MPE section received */ + + u32 reservedFields[10]; /* reserved */ +}; + +struct sms_msg_statistics_info { + u32 request_result; + + struct sms_stats stat; + + /* Split the calc of the SNR in DAB */ + u32 signal; /* dB */ + u32 noise; /* dB */ + +}; + +struct sms_isdbt_layer_stats { + /* Per-layer information */ + u32 code_rate; /* Code Rate from SMSHOSTLIB_CODE_RATE_ET, + * 255 means layer does not exist */ + u32 constellation; /* constellation from SMSHOSTLIB_CONSTELLATION_ET, + * 255 means layer does not exist */ + u32 ber; /* Post Viterbi ber [1E-5], 0xFFFFFFFF indicate N/A */ + u32 ber_error_count; /* Post Viterbi Error Bits Count */ + u32 ber_bit_count; /* Post Viterbi Total Bits Count */ + u32 pre_ber; /* Pre Viterbi ber [1E-5], 0xFFFFFFFF indicate N/A */ + u32 ts_per; /* Transport stream PER [%], 0xFFFFFFFF indicate N/A */ + u32 error_ts_packets; /* Number of erroneous transport-stream packets */ + u32 total_ts_packets; /* Total number of transport-stream packets */ + u32 ti_ldepth_i; /* Time interleaver depth I parameter, + * 255 means layer does not exist */ + u32 number_of_segments; /* Number of segments in layer A, + * 255 means layer does not exist */ + u32 tmcc_errors; /* TMCC errors */ +}; + +struct sms_isdbt_stats { + u32 statistics_type; /* Enumerator identifying the type of the + * structure. Values are the same as + * SMSHOSTLIB_DEVICE_MODES_E + * + * This field MUST always be first in any + * statistics structure */ + + u32 full_size; /* Total size of the structure returned by the modem. + * If the size requested by the host is smaller than + * full_size, the struct will be truncated */ + + /* Common parameters */ + u32 is_rf_locked; /* 0 - not locked, 1 - locked */ + u32 is_demod_locked; /* 0 - not locked, 1 - locked */ + u32 is_external_lna_on; /* 0 - external LNA off, 1 - external LNA on */ + + /* Reception quality */ + s32 SNR; /* dB */ + s32 RSSI; /* dBm */ + s32 in_band_pwr; /* In band power in dBM */ + s32 carrier_offset; /* Carrier Offset in Hz */ + + /* Transmission parameters */ + u32 frequency; /* frequency in Hz */ + u32 bandwidth; /* bandwidth in MHz */ + u32 transmission_mode; /* ISDB-T transmission mode */ + u32 modem_state; /* 0 - Acquisition, 1 - Locked */ + u32 guard_interval; /* Guard Interval, 1 divided by value */ + u32 system_type; /* ISDB-T system type (ISDB-T / ISDB-Tsb) */ + u32 partial_reception; /* TRUE - partial reception, FALSE otherwise */ + u32 num_of_layers; /* Number of ISDB-T layers in the network */ + + /* Per-layer information */ + /* Layers A, B and C */ + struct sms_isdbt_layer_stats layer_info[3]; + /* Per-layer statistics, see sms_isdbt_layer_stats */ + + /* Interface information */ + u32 sms_to_host_tx_errors; /* Total number of transmission errors. */ +}; + +struct sms_isdbt_stats_ex { + u32 statistics_type; /* Enumerator identifying the type of the + * structure. Values are the same as + * SMSHOSTLIB_DEVICE_MODES_E + * + * This field MUST always be first in any + * statistics structure */ + + u32 full_size; /* Total size of the structure returned by the modem. + * If the size requested by the host is smaller than + * full_size, the struct will be truncated */ + + /* Common parameters */ + u32 is_rf_locked; /* 0 - not locked, 1 - locked */ + u32 is_demod_locked; /* 0 - not locked, 1 - locked */ + u32 is_external_lna_on; /* 0 - external LNA off, 1 - external LNA on */ + + /* Reception quality */ + s32 SNR; /* dB */ + s32 RSSI; /* dBm */ + s32 in_band_pwr; /* In band power in dBM */ + s32 carrier_offset; /* Carrier Offset in Hz */ + + /* Transmission parameters */ + u32 frequency; /* frequency in Hz */ + u32 bandwidth; /* bandwidth in MHz */ + u32 transmission_mode; /* ISDB-T transmission mode */ + u32 modem_state; /* 0 - Acquisition, 1 - Locked */ + u32 guard_interval; /* Guard Interval, 1 divided by value */ + u32 system_type; /* ISDB-T system type (ISDB-T / ISDB-Tsb) */ + u32 partial_reception; /* TRUE - partial reception, FALSE otherwise */ + u32 num_of_layers; /* Number of ISDB-T layers in the network */ + + u32 segment_number; /* Segment number for ISDB-Tsb */ + u32 tune_bw; /* Tuned bandwidth - BW_ISDBT_1SEG / BW_ISDBT_3SEG */ + + /* Per-layer information */ + /* Layers A, B and C */ + struct sms_isdbt_layer_stats layer_info[3]; + /* Per-layer statistics, see sms_isdbt_layer_stats */ + + /* Interface information */ + u32 reserved1; /* Was sms_to_host_tx_errors - obsolete . */ + /* Proprietary information */ + u32 ext_antenna; /* Obsolete field. */ + u32 reception_quality; + u32 ews_alert_active; /* signals if EWS alert is currently on */ + u32 lna_on_off; /* Internal LNA state: 0: OFF, 1: ON */ + + u32 rf_agc_level; /* RF AGC Level [linear units], full gain = 65535 (20dB) */ + u32 bb_agc_level; /* Baseband AGC level [linear units], full gain = 65535 (71.5dB) */ + u32 fw_errors_counter; /* Application errors - should be always zero */ + u8 FwErrorsHistoryArr[8]; /* Last FW errors IDs - first is most recent, last is oldest */ + + s32 MRC_SNR; /* dB */ + u32 snr_full_res; /* dB x 65536 */ + u32 reserved4[4]; +}; + + +struct sms_pid_stats_data { + struct PID_BURST_S { + u32 size; + u32 padding_cols; + u32 punct_cols; + u32 duration; + u32 cycle; + u32 calc_cycle; + } burst; + + u32 tot_tbl_cnt; + u32 invalid_tbl_cnt; + u32 tot_cor_tbl; +}; + +struct sms_pid_data { + u32 pid; + u32 num_rows; + struct sms_pid_stats_data pid_statistics; +}; + +#define CORRECT_STAT_RSSI(_stat) ((_stat).RSSI *= -1) +#define CORRECT_STAT_BANDWIDTH(_stat) (_stat.bandwidth = 8 - _stat.bandwidth) +#define CORRECT_STAT_TRANSMISSON_MODE(_stat) \ + if (_stat.transmission_mode == 0) \ + _stat.transmission_mode = 2; \ + else if (_stat.transmission_mode == 1) \ + _stat.transmission_mode = 8; \ + else \ + _stat.transmission_mode = 4; + +struct sms_tx_stats { + u32 frequency; /* frequency in Hz */ + u32 bandwidth; /* bandwidth in MHz */ + u32 transmission_mode; /* FFT mode carriers in Kilos */ + u32 guard_interval; /* Guard Interval from + SMSHOSTLIB_GUARD_INTERVALS_ET */ + u32 code_rate; /* Code Rate from SMSHOSTLIB_CODE_RATE_ET */ + u32 lp_code_rate; /* Low Priority Code Rate from + SMSHOSTLIB_CODE_RATE_ET */ + u32 hierarchy; /* hierarchy from SMSHOSTLIB_HIERARCHY_ET */ + u32 constellation; /* constellation from + SMSHOSTLIB_CONSTELLATION_ET */ + + /* DVB-H TPS parameters */ + u32 cell_id; /* TPS Cell ID in bits 15..0, bits 31..16 zero; + if set to 0xFFFFFFFF cell_id not yet recovered */ + u32 dvbh_srv_ind_hp; /* DVB-H service indication info, bit 1 - + Time Slicing indicator, bit 0 - MPE-FEC indicator */ + u32 dvbh_srv_ind_lp; /* DVB-H service indication info, bit 1 - + Time Slicing indicator, bit 0 - MPE-FEC indicator */ + u32 is_demod_locked; /* 0 - not locked, 1 - locked */ +}; + +struct sms_rx_stats { + u32 is_rf_locked; /* 0 - not locked, 1 - locked */ + u32 is_demod_locked; /* 0 - not locked, 1 - locked */ + u32 is_external_lna_on; /* 0 - external LNA off, 1 - external LNA on */ + + u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */ + s32 SNR; /* dB */ + u32 ber; /* Post Viterbi ber [1E-5] */ + u32 ber_error_count; /* Number of erronous SYNC bits. */ + u32 ber_bit_count; /* Total number of SYNC bits. */ + u32 ts_per; /* Transport stream PER, + 0xFFFFFFFF indicate N/A */ + u32 MFER; /* DVB-H frame error rate in percentage, + 0xFFFFFFFF indicate N/A, valid only for DVB-H */ + s32 RSSI; /* dBm */ + s32 in_band_pwr; /* In band power in dBM */ + s32 carrier_offset; /* Carrier Offset in bin/1024 */ + u32 error_ts_packets; /* Number of erroneous + transport-stream packets */ + u32 total_ts_packets; /* Total number of transport-stream packets */ + + s32 MRC_SNR; /* dB */ + s32 MRC_RSSI; /* dBm */ + s32 mrc_in_band_pwr; /* In band power in dBM */ +}; + +struct sms_rx_stats_ex { + u32 is_rf_locked; /* 0 - not locked, 1 - locked */ + u32 is_demod_locked; /* 0 - not locked, 1 - locked */ + u32 is_external_lna_on; /* 0 - external LNA off, 1 - external LNA on */ + + u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */ + s32 SNR; /* dB */ + u32 ber; /* Post Viterbi ber [1E-5] */ + u32 ber_error_count; /* Number of erronous SYNC bits. */ + u32 ber_bit_count; /* Total number of SYNC bits. */ + u32 ts_per; /* Transport stream PER, + 0xFFFFFFFF indicate N/A */ + u32 MFER; /* DVB-H frame error rate in percentage, + 0xFFFFFFFF indicate N/A, valid only for DVB-H */ + s32 RSSI; /* dBm */ + s32 in_band_pwr; /* In band power in dBM */ + s32 carrier_offset; /* Carrier Offset in bin/1024 */ + u32 error_ts_packets; /* Number of erroneous + transport-stream packets */ + u32 total_ts_packets; /* Total number of transport-stream packets */ + + s32 ref_dev_ppm; + s32 freq_dev_hz; + + s32 MRC_SNR; /* dB */ + s32 MRC_RSSI; /* dBm */ + s32 mrc_in_band_pwr; /* In band power in dBM */ +}; + + +/* statistics information returned as response for + * SmsHostApiGetstatisticsEx_Req for DVB applications, SMS1100 and up */ +struct sms_stats_dvb { + /* Reception */ + struct sms_rx_stats reception_data; + + /* Transmission parameters */ + struct sms_tx_stats transmission_data; + + /* Burst parameters, valid only for DVB-H */ +#define SRVM_MAX_PID_FILTERS 8 + struct sms_pid_data pid_data[SRVM_MAX_PID_FILTERS]; +}; + +/* statistics information returned as response for + * SmsHostApiGetstatisticsEx_Req for DVB applications, SMS1100 and up */ +struct sms_stats_dvb_ex { + /* Reception */ + struct sms_rx_stats_ex reception_data; + + /* Transmission parameters */ + struct sms_tx_stats transmission_data; + + /* Burst parameters, valid only for DVB-H */ +#define SRVM_MAX_PID_FILTERS 8 + struct sms_pid_data pid_data[SRVM_MAX_PID_FILTERS]; +}; + +struct sms_srvm_signal_status { + u32 result; + u32 snr; + u32 ts_packets; + u32 ets_packets; + u32 constellation; + u32 hp_code; + u32 tps_srv_ind_lp; + u32 tps_srv_ind_hp; + u32 cell_id; + u32 reason; + + s32 in_band_power; + u32 request_id; +}; + +struct sms_i2c_req { + u32 device_address; /* I2c device address */ + u32 write_count; /* number of bytes to write */ + u32 read_count; /* number of bytes to read */ + u8 Data[1]; +}; + +struct sms_i2c_res { + u32 status; /* non-zero value in case of failure */ + u32 read_count; /* number of bytes read */ + u8 Data[1]; +}; + + +struct smscore_config_gpio { +#define SMS_GPIO_DIRECTION_INPUT 0 +#define SMS_GPIO_DIRECTION_OUTPUT 1 + u8 direction; + +#define SMS_GPIO_PULLUPDOWN_NONE 0 +#define SMS_GPIO_PULLUPDOWN_PULLDOWN 1 +#define SMS_GPIO_PULLUPDOWN_PULLUP 2 +#define SMS_GPIO_PULLUPDOWN_KEEPER 3 + u8 pullupdown; + +#define SMS_GPIO_INPUTCHARACTERISTICS_NORMAL 0 +#define SMS_GPIO_INPUTCHARACTERISTICS_SCHMITT 1 + u8 inputcharacteristics; + + /* 10xx */ +#define SMS_GPIO_OUTPUT_SLEW_RATE_FAST 0 +#define SMS_GPIO_OUTPUT_SLEW_WRATE_SLOW 1 + + /* 11xx */ +#define SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS 0 +#define SMS_GPIO_OUTPUT_SLEW_RATE_0_9_V_NS 1 +#define SMS_GPIO_OUTPUT_SLEW_RATE_1_7_V_NS 2 +#define SMS_GPIO_OUTPUT_SLEW_RATE_3_3_V_NS 3 + + u8 outputslewrate; + + /* 10xx */ +#define SMS_GPIO_OUTPUTDRIVING_S_4mA 0 +#define SMS_GPIO_OUTPUTDRIVING_S_8mA 1 +#define SMS_GPIO_OUTPUTDRIVING_S_12mA 2 +#define SMS_GPIO_OUTPUTDRIVING_S_16mA 3 + + /* 11xx*/ +#define SMS_GPIO_OUTPUTDRIVING_1_5mA 0 +#define SMS_GPIO_OUTPUTDRIVING_2_8mA 1 +#define SMS_GPIO_OUTPUTDRIVING_4mA 2 +#define SMS_GPIO_OUTPUTDRIVING_7mA 3 +#define SMS_GPIO_OUTPUTDRIVING_10mA 4 +#define SMS_GPIO_OUTPUTDRIVING_11mA 5 +#define SMS_GPIO_OUTPUTDRIVING_14mA 6 +#define SMS_GPIO_OUTPUTDRIVING_16mA 7 + + u8 outputdriving; +}; + +char *smscore_translate_msg(enum msg_types msgtype); + +extern int smscore_registry_getmode(char *devpath); + +extern int smscore_register_hotplug(hotplug_t hotplug); +extern void smscore_unregister_hotplug(hotplug_t hotplug); + +extern int smscore_register_device(struct smsdevice_params_t *params, + struct smscore_device_t **coredev); +extern void smscore_unregister_device(struct smscore_device_t *coredev); + +extern int smscore_start_device(struct smscore_device_t *coredev); +extern int smscore_load_firmware(struct smscore_device_t *coredev, + char *filename, + loadfirmware_t loadfirmware_handler); + +extern int smscore_set_device_mode(struct smscore_device_t *coredev, int mode); +extern int smscore_get_device_mode(struct smscore_device_t *coredev); + +extern int smscore_register_client(struct smscore_device_t *coredev, + struct smsclient_params_t *params, + struct smscore_client_t **client); +extern void smscore_unregister_client(struct smscore_client_t *client); + +extern int smsclient_sendrequest(struct smscore_client_t *client, + void *buffer, size_t size); +extern void smscore_onresponse(struct smscore_device_t *coredev, + struct smscore_buffer_t *cb); + +extern int smscore_get_common_buffer_size(struct smscore_device_t *coredev); +extern int smscore_map_common_buffer(struct smscore_device_t *coredev, + struct vm_area_struct *vma); +extern int smscore_send_fw_file(struct smscore_device_t *coredev, + u8 *ufwbuf, int size); + +extern +struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev); +extern void smscore_putbuffer(struct smscore_device_t *coredev, + struct smscore_buffer_t *cb); + +/* old GPIO management */ +int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, + struct smscore_config_gpio *pinconfig); +int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level); + +/* new GPIO management */ +extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 pin_num, + struct smscore_config_gpio *p_gpio_config); +extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 pin_num, + u8 new_level); +extern int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 pin_num, + u8 *level); + +void smscore_set_board_id(struct smscore_device_t *core, int id); +int smscore_get_board_id(struct smscore_device_t *core); + +int smscore_led_state(struct smscore_device_t *core, int led); + + +/* ------------------------------------------------------------------------ */ + +#define DBG_INFO 1 +#define DBG_ADV 2 + +#define sms_printk(kern, fmt, arg...) \ + printk(kern "%s: " fmt "\n", __func__, ##arg) + +#define dprintk(kern, lvl, fmt, arg...) do {\ + if (sms_dbg & lvl) \ + sms_printk(kern, fmt, ##arg); \ +} while (0) + +#define sms_log(fmt, arg...) sms_printk(KERN_INFO, fmt, ##arg) +#define sms_err(fmt, arg...) \ + sms_printk(KERN_ERR, "line: %d: " fmt, __LINE__, ##arg) +#define sms_warn(fmt, arg...) sms_printk(KERN_WARNING, fmt, ##arg) +#define sms_info(fmt, arg...) \ + dprintk(KERN_INFO, DBG_INFO, fmt, ##arg) +#define sms_debug(fmt, arg...) \ + dprintk(KERN_DEBUG, DBG_ADV, fmt, ##arg) + + +#endif /* __SMS_CORE_API_H__ */ diff --git a/drivers/media/common/siano/smsdvb-debugfs.c b/drivers/media/common/siano/smsdvb-debugfs.c new file mode 100644 index 00000000..0bb44305 --- /dev/null +++ b/drivers/media/common/siano/smsdvb-debugfs.c @@ -0,0 +1,551 @@ +/*********************************************************************** + * + * Copyright(c) 2013 Mauro Carvalho Chehab + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + ***********************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" + +#include "smscoreapi.h" + +#include "smsdvb.h" + +static struct dentry *smsdvb_debugfs_usb_root; + +struct smsdvb_debugfs { + struct kref refcount; + spinlock_t lock; + + char stats_data[PAGE_SIZE]; + unsigned stats_count; + bool stats_was_read; + + wait_queue_head_t stats_queue; +}; + +static void smsdvb_print_dvb_stats(struct smsdvb_debugfs *debug_data, + struct sms_stats *p) +{ + int n = 0; + char *buf; + + spin_lock(&debug_data->lock); + if (debug_data->stats_count) { + spin_unlock(&debug_data->lock); + return; + } + + buf = debug_data->stats_data; + + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_rf_locked = %d\n", p->is_rf_locked); + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_demod_locked = %d\n", p->is_demod_locked); + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_external_lna_on = %d\n", p->is_external_lna_on); + n += snprintf(&buf[n], PAGE_SIZE - n, + "SNR = %d\n", p->SNR); + n += snprintf(&buf[n], PAGE_SIZE - n, + "ber = %d\n", p->ber); + n += snprintf(&buf[n], PAGE_SIZE - n, + "FIB_CRC = %d\n", p->FIB_CRC); + n += snprintf(&buf[n], PAGE_SIZE - n, + "ts_per = %d\n", p->ts_per); + n += snprintf(&buf[n], PAGE_SIZE - n, + "MFER = %d\n", p->MFER); + n += snprintf(&buf[n], PAGE_SIZE - n, + "RSSI = %d\n", p->RSSI); + n += snprintf(&buf[n], PAGE_SIZE - n, + "in_band_pwr = %d\n", p->in_band_pwr); + n += snprintf(&buf[n], PAGE_SIZE - n, + "carrier_offset = %d\n", p->carrier_offset); + n += snprintf(&buf[n], PAGE_SIZE - n, + "modem_state = %d\n", p->modem_state); + n += snprintf(&buf[n], PAGE_SIZE - n, + "frequency = %d\n", p->frequency); + n += snprintf(&buf[n], PAGE_SIZE - n, + "bandwidth = %d\n", p->bandwidth); + n += snprintf(&buf[n], PAGE_SIZE - n, + "transmission_mode = %d\n", p->transmission_mode); + n += snprintf(&buf[n], PAGE_SIZE - n, + "modem_state = %d\n", p->modem_state); + n += snprintf(&buf[n], PAGE_SIZE - n, + "guard_interval = %d\n", p->guard_interval); + n += snprintf(&buf[n], PAGE_SIZE - n, + "code_rate = %d\n", p->code_rate); + n += snprintf(&buf[n], PAGE_SIZE - n, + "lp_code_rate = %d\n", p->lp_code_rate); + n += snprintf(&buf[n], PAGE_SIZE - n, + "hierarchy = %d\n", p->hierarchy); + n += snprintf(&buf[n], PAGE_SIZE - n, + "constellation = %d\n", p->constellation); + n += snprintf(&buf[n], PAGE_SIZE - n, + "burst_size = %d\n", p->burst_size); + n += snprintf(&buf[n], PAGE_SIZE - n, + "burst_duration = %d\n", p->burst_duration); + n += snprintf(&buf[n], PAGE_SIZE - n, + "burst_cycle_time = %d\n", p->burst_cycle_time); + n += snprintf(&buf[n], PAGE_SIZE - n, + "calc_burst_cycle_time = %d\n", + p->calc_burst_cycle_time); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_of_rows = %d\n", p->num_of_rows); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_of_padd_cols = %d\n", p->num_of_padd_cols); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_of_punct_cols = %d\n", p->num_of_punct_cols); + n += snprintf(&buf[n], PAGE_SIZE - n, + "error_ts_packets = %d\n", p->error_ts_packets); + n += snprintf(&buf[n], PAGE_SIZE - n, + "total_ts_packets = %d\n", p->total_ts_packets); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_of_valid_mpe_tlbs = %d\n", p->num_of_valid_mpe_tlbs); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_of_invalid_mpe_tlbs = %d\n", p->num_of_invalid_mpe_tlbs); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_of_corrected_mpe_tlbs = %d\n", p->num_of_corrected_mpe_tlbs); + n += snprintf(&buf[n], PAGE_SIZE - n, + "ber_error_count = %d\n", p->ber_error_count); + n += snprintf(&buf[n], PAGE_SIZE - n, + "ber_bit_count = %d\n", p->ber_bit_count); + n += snprintf(&buf[n], PAGE_SIZE - n, + "sms_to_host_tx_errors = %d\n", p->sms_to_host_tx_errors); + n += snprintf(&buf[n], PAGE_SIZE - n, + "pre_ber = %d\n", p->pre_ber); + n += snprintf(&buf[n], PAGE_SIZE - n, + "cell_id = %d\n", p->cell_id); + n += snprintf(&buf[n], PAGE_SIZE - n, + "dvbh_srv_ind_hp = %d\n", p->dvbh_srv_ind_hp); + n += snprintf(&buf[n], PAGE_SIZE - n, + "dvbh_srv_ind_lp = %d\n", p->dvbh_srv_ind_lp); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_mpe_received = %d\n", p->num_mpe_received); + + debug_data->stats_count = n; + spin_unlock(&debug_data->lock); + wake_up(&debug_data->stats_queue); +} + +static void smsdvb_print_isdb_stats(struct smsdvb_debugfs *debug_data, + struct sms_isdbt_stats *p) +{ + int i, n = 0; + char *buf; + + spin_lock(&debug_data->lock); + if (debug_data->stats_count) { + spin_unlock(&debug_data->lock); + return; + } + + buf = debug_data->stats_data; + + n += snprintf(&buf[n], PAGE_SIZE - n, + "statistics_type = %d\t", p->statistics_type); + n += snprintf(&buf[n], PAGE_SIZE - n, + "full_size = %d\n", p->full_size); + + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_rf_locked = %d\t\t", p->is_rf_locked); + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_demod_locked = %d\t", p->is_demod_locked); + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_external_lna_on = %d\n", p->is_external_lna_on); + n += snprintf(&buf[n], PAGE_SIZE - n, + "SNR = %d dB\t\t", p->SNR); + n += snprintf(&buf[n], PAGE_SIZE - n, + "RSSI = %d dBm\t\t", p->RSSI); + n += snprintf(&buf[n], PAGE_SIZE - n, + "in_band_pwr = %d dBm\n", p->in_band_pwr); + n += snprintf(&buf[n], PAGE_SIZE - n, + "carrier_offset = %d\t", p->carrier_offset); + n += snprintf(&buf[n], PAGE_SIZE - n, + "bandwidth = %d\t\t", p->bandwidth); + n += snprintf(&buf[n], PAGE_SIZE - n, + "frequency = %d Hz\n", p->frequency); + n += snprintf(&buf[n], PAGE_SIZE - n, + "transmission_mode = %d\t", p->transmission_mode); + n += snprintf(&buf[n], PAGE_SIZE - n, + "modem_state = %d\t\t", p->modem_state); + n += snprintf(&buf[n], PAGE_SIZE - n, + "guard_interval = %d\n", p->guard_interval); + n += snprintf(&buf[n], PAGE_SIZE - n, + "system_type = %d\t\t", p->system_type); + n += snprintf(&buf[n], PAGE_SIZE - n, + "partial_reception = %d\t", p->partial_reception); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_of_layers = %d\n", p->num_of_layers); + n += snprintf(&buf[n], PAGE_SIZE - n, + "sms_to_host_tx_errors = %d\n", p->sms_to_host_tx_errors); + + for (i = 0; i < 3; i++) { + if (p->layer_info[i].number_of_segments < 1 || + p->layer_info[i].number_of_segments > 13) + continue; + + n += snprintf(&buf[n], PAGE_SIZE - n, "\nLayer %d\n", i); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tcode_rate = %d\t", + p->layer_info[i].code_rate); + n += snprintf(&buf[n], PAGE_SIZE - n, "constellation = %d\n", + p->layer_info[i].constellation); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tber = %-5d\t", + p->layer_info[i].ber); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tber_error_count = %-5d\t", + p->layer_info[i].ber_error_count); + n += snprintf(&buf[n], PAGE_SIZE - n, "ber_bit_count = %-5d\n", + p->layer_info[i].ber_bit_count); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tpre_ber = %-5d\t", + p->layer_info[i].pre_ber); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tts_per = %-5d\n", + p->layer_info[i].ts_per); + n += snprintf(&buf[n], PAGE_SIZE - n, "\terror_ts_packets = %-5d\t", + p->layer_info[i].error_ts_packets); + n += snprintf(&buf[n], PAGE_SIZE - n, "total_ts_packets = %-5d\t", + p->layer_info[i].total_ts_packets); + n += snprintf(&buf[n], PAGE_SIZE - n, "ti_ldepth_i = %d\n", + p->layer_info[i].ti_ldepth_i); + n += snprintf(&buf[n], PAGE_SIZE - n, + "\tnumber_of_segments = %d\t", + p->layer_info[i].number_of_segments); + n += snprintf(&buf[n], PAGE_SIZE - n, "tmcc_errors = %d\n", + p->layer_info[i].tmcc_errors); + } + + debug_data->stats_count = n; + spin_unlock(&debug_data->lock); + wake_up(&debug_data->stats_queue); +} + +static void smsdvb_print_isdb_stats_ex(struct smsdvb_debugfs *debug_data, + struct sms_isdbt_stats_ex *p) +{ + int i, n = 0; + char *buf; + + spin_lock(&debug_data->lock); + if (debug_data->stats_count) { + spin_unlock(&debug_data->lock); + return; + } + + buf = debug_data->stats_data; + + n += snprintf(&buf[n], PAGE_SIZE - n, + "statistics_type = %d\t", p->statistics_type); + n += snprintf(&buf[n], PAGE_SIZE - n, + "full_size = %d\n", p->full_size); + + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_rf_locked = %d\t\t", p->is_rf_locked); + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_demod_locked = %d\t", p->is_demod_locked); + n += snprintf(&buf[n], PAGE_SIZE - n, + "is_external_lna_on = %d\n", p->is_external_lna_on); + n += snprintf(&buf[n], PAGE_SIZE - n, + "SNR = %d dB\t\t", p->SNR); + n += snprintf(&buf[n], PAGE_SIZE - n, + "RSSI = %d dBm\t\t", p->RSSI); + n += snprintf(&buf[n], PAGE_SIZE - n, + "in_band_pwr = %d dBm\n", p->in_band_pwr); + n += snprintf(&buf[n], PAGE_SIZE - n, + "carrier_offset = %d\t", p->carrier_offset); + n += snprintf(&buf[n], PAGE_SIZE - n, + "bandwidth = %d\t\t", p->bandwidth); + n += snprintf(&buf[n], PAGE_SIZE - n, + "frequency = %d Hz\n", p->frequency); + n += snprintf(&buf[n], PAGE_SIZE - n, + "transmission_mode = %d\t", p->transmission_mode); + n += snprintf(&buf[n], PAGE_SIZE - n, + "modem_state = %d\t\t", p->modem_state); + n += snprintf(&buf[n], PAGE_SIZE - n, + "guard_interval = %d\n", p->guard_interval); + n += snprintf(&buf[n], PAGE_SIZE - n, + "system_type = %d\t\t", p->system_type); + n += snprintf(&buf[n], PAGE_SIZE - n, + "partial_reception = %d\t", p->partial_reception); + n += snprintf(&buf[n], PAGE_SIZE - n, + "num_of_layers = %d\n", p->num_of_layers); + n += snprintf(&buf[n], PAGE_SIZE - n, "segment_number = %d\t", + p->segment_number); + n += snprintf(&buf[n], PAGE_SIZE - n, "tune_bw = %d\n", + p->tune_bw); + + for (i = 0; i < 3; i++) { + if (p->layer_info[i].number_of_segments < 1 || + p->layer_info[i].number_of_segments > 13) + continue; + + n += snprintf(&buf[n], PAGE_SIZE - n, "\nLayer %d\n", i); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tcode_rate = %d\t", + p->layer_info[i].code_rate); + n += snprintf(&buf[n], PAGE_SIZE - n, "constellation = %d\n", + p->layer_info[i].constellation); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tber = %-5d\t", + p->layer_info[i].ber); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tber_error_count = %-5d\t", + p->layer_info[i].ber_error_count); + n += snprintf(&buf[n], PAGE_SIZE - n, "ber_bit_count = %-5d\n", + p->layer_info[i].ber_bit_count); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tpre_ber = %-5d\t", + p->layer_info[i].pre_ber); + n += snprintf(&buf[n], PAGE_SIZE - n, "\tts_per = %-5d\n", + p->layer_info[i].ts_per); + n += snprintf(&buf[n], PAGE_SIZE - n, "\terror_ts_packets = %-5d\t", + p->layer_info[i].error_ts_packets); + n += snprintf(&buf[n], PAGE_SIZE - n, "total_ts_packets = %-5d\t", + p->layer_info[i].total_ts_packets); + n += snprintf(&buf[n], PAGE_SIZE - n, "ti_ldepth_i = %d\n", + p->layer_info[i].ti_ldepth_i); + n += snprintf(&buf[n], PAGE_SIZE - n, + "\tnumber_of_segments = %d\t", + p->layer_info[i].number_of_segments); + n += snprintf(&buf[n], PAGE_SIZE - n, "tmcc_errors = %d\n", + p->layer_info[i].tmcc_errors); + } + + + debug_data->stats_count = n; + spin_unlock(&debug_data->lock); + + wake_up(&debug_data->stats_queue); +} + +static int smsdvb_stats_open(struct inode *inode, struct file *file) +{ + struct smsdvb_client_t *client = inode->i_private; + struct smsdvb_debugfs *debug_data = client->debug_data; + + kref_get(&debug_data->refcount); + + spin_lock(&debug_data->lock); + debug_data->stats_count = 0; + debug_data->stats_was_read = false; + spin_unlock(&debug_data->lock); + + file->private_data = debug_data; + + return 0; +} + +static void smsdvb_debugfs_data_release(struct kref *ref) +{ + struct smsdvb_debugfs *debug_data; + + debug_data = container_of(ref, struct smsdvb_debugfs, refcount); + kfree(debug_data); +} + +static int smsdvb_stats_wait_read(struct smsdvb_debugfs *debug_data) +{ + int rc = 1; + + spin_lock(&debug_data->lock); + + if (debug_data->stats_was_read) + goto exit; + + rc = debug_data->stats_count; + +exit: + spin_unlock(&debug_data->lock); + return rc; +} + +static unsigned int smsdvb_stats_poll(struct file *file, poll_table *wait) +{ + struct smsdvb_debugfs *debug_data = file->private_data; + int rc; + + kref_get(&debug_data->refcount); + + poll_wait(file, &debug_data->stats_queue, wait); + + rc = smsdvb_stats_wait_read(debug_data); + if (rc > 0) + rc = POLLIN | POLLRDNORM; + + kref_put(&debug_data->refcount, smsdvb_debugfs_data_release); + + return rc; +} + +static ssize_t smsdvb_stats_read(struct file *file, char __user *user_buf, + size_t nbytes, loff_t *ppos) +{ + int rc = 0, len; + struct smsdvb_debugfs *debug_data = file->private_data; + + kref_get(&debug_data->refcount); + + if (file->f_flags & O_NONBLOCK) { + rc = smsdvb_stats_wait_read(debug_data); + if (!rc) { + rc = -EWOULDBLOCK; + goto ret; + } + } else { + rc = wait_event_interruptible(debug_data->stats_queue, + smsdvb_stats_wait_read(debug_data)); + if (rc < 0) + goto ret; + } + + if (debug_data->stats_was_read) { + rc = 0; /* EOF */ + goto ret; + } + + len = debug_data->stats_count - *ppos; + if (len >= 0) + rc = simple_read_from_buffer(user_buf, nbytes, ppos, + debug_data->stats_data, len); + else + rc = 0; + + if (*ppos >= debug_data->stats_count) { + spin_lock(&debug_data->lock); + debug_data->stats_was_read = true; + spin_unlock(&debug_data->lock); + } +ret: + kref_put(&debug_data->refcount, smsdvb_debugfs_data_release); + return rc; +} + +static int smsdvb_stats_release(struct inode *inode, struct file *file) +{ + struct smsdvb_debugfs *debug_data = file->private_data; + + spin_lock(&debug_data->lock); + debug_data->stats_was_read = true; /* return EOF to read() */ + spin_unlock(&debug_data->lock); + wake_up_interruptible_sync(&debug_data->stats_queue); + + kref_put(&debug_data->refcount, smsdvb_debugfs_data_release); + file->private_data = NULL; + + return 0; +} + +static const struct file_operations debugfs_stats_ops = { + .open = smsdvb_stats_open, + .poll = smsdvb_stats_poll, + .read = smsdvb_stats_read, + .release = smsdvb_stats_release, + .llseek = generic_file_llseek, +}; + +/* + * Functions used by smsdvb, in order to create the interfaces + */ + +int smsdvb_debugfs_create(struct smsdvb_client_t *client) +{ + struct smscore_device_t *coredev = client->coredev; + struct dentry *d; + struct smsdvb_debugfs *debug_data; + + if (!smsdvb_debugfs_usb_root || !coredev->is_usb_device) + return -ENODEV; + + client->debugfs = debugfs_create_dir(coredev->devpath, + smsdvb_debugfs_usb_root); + if (IS_ERR_OR_NULL(client->debugfs)) { + pr_info("Unable to create debugfs %s directory.\n", + coredev->devpath); + return -ENODEV; + } + + d = debugfs_create_file("stats", S_IRUGO | S_IWUSR, client->debugfs, + client, &debugfs_stats_ops); + if (!d) { + debugfs_remove(client->debugfs); + return -ENOMEM; + } + + debug_data = kzalloc(sizeof(*client->debug_data), GFP_KERNEL); + if (!debug_data) + return -ENOMEM; + + client->debug_data = debug_data; + client->prt_dvb_stats = smsdvb_print_dvb_stats; + client->prt_isdb_stats = smsdvb_print_isdb_stats; + client->prt_isdb_stats_ex = smsdvb_print_isdb_stats_ex; + + init_waitqueue_head(&debug_data->stats_queue); + spin_lock_init(&debug_data->lock); + kref_init(&debug_data->refcount); + + return 0; +} + +void smsdvb_debugfs_release(struct smsdvb_client_t *client) +{ + if (!client->debugfs) + return; + + client->prt_dvb_stats = NULL; + client->prt_isdb_stats = NULL; + client->prt_isdb_stats_ex = NULL; + + debugfs_remove_recursive(client->debugfs); + kref_put(&client->debug_data->refcount, smsdvb_debugfs_data_release); + + client->debug_data = NULL; + client->debugfs = NULL; +} + +int smsdvb_debugfs_register(void) +{ + struct dentry *d; + + /* + * FIXME: This was written to debug Siano USB devices. So, it creates + * the debugfs node under /usb. + * A similar logic would be needed for Siano sdio devices, but, in that + * case, usb_debug_root is not a good choice. + * + * Perhaps the right fix here would be to create another sysfs root + * node for sdio-based boards, but this may need some logic at sdio + * subsystem. + */ + d = debugfs_create_dir("smsdvb", usb_debug_root); + if (IS_ERR_OR_NULL(d)) { + sms_err("Couldn't create sysfs node for smsdvb"); + return PTR_ERR(d); + } else { + smsdvb_debugfs_usb_root = d; + } + return 0; +} + +void smsdvb_debugfs_unregister(void) +{ + debugfs_remove_recursive(smsdvb_debugfs_usb_root); + smsdvb_debugfs_usb_root = NULL; +} diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c new file mode 100644 index 00000000..8df1aea5 --- /dev/null +++ b/drivers/media/common/siano/smsdvb-main.c @@ -0,0 +1,1231 @@ +/**************************************************************** + +Siano Mobile Silicon, Inc. +MDTV receiver kernel modules. +Copyright (C) 2006-2008, Uri Shkolnik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + + This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +****************************************************************/ + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" + +#include "smscoreapi.h" +#include "sms-cards.h" + +#include "smsdvb.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static struct list_head g_smsdvb_clients; +static struct mutex g_smsdvb_clientslock; + +static int sms_dbg; +module_param_named(debug, sms_dbg, int, 0644); +MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))"); + + +u32 sms_to_guard_interval_table[] = { + [0] = GUARD_INTERVAL_1_32, + [1] = GUARD_INTERVAL_1_16, + [2] = GUARD_INTERVAL_1_8, + [3] = GUARD_INTERVAL_1_4, +}; + +u32 sms_to_code_rate_table[] = { + [0] = FEC_1_2, + [1] = FEC_2_3, + [2] = FEC_3_4, + [3] = FEC_5_6, + [4] = FEC_7_8, +}; + + +u32 sms_to_hierarchy_table[] = { + [0] = HIERARCHY_NONE, + [1] = HIERARCHY_1, + [2] = HIERARCHY_2, + [3] = HIERARCHY_4, +}; + +u32 sms_to_modulation_table[] = { + [0] = QPSK, + [1] = QAM_16, + [2] = QAM_64, + [3] = DQPSK, +}; + + +/* Events that may come from DVB v3 adapter */ +static void sms_board_dvb3_event(struct smsdvb_client_t *client, + enum SMS_DVB3_EVENTS event) { + + struct smscore_device_t *coredev = client->coredev; + switch (event) { + case DVB3_EVENT_INIT: + sms_debug("DVB3_EVENT_INIT"); + sms_board_event(coredev, BOARD_EVENT_BIND); + break; + case DVB3_EVENT_SLEEP: + sms_debug("DVB3_EVENT_SLEEP"); + sms_board_event(coredev, BOARD_EVENT_POWER_SUSPEND); + break; + case DVB3_EVENT_HOTPLUG: + sms_debug("DVB3_EVENT_HOTPLUG"); + sms_board_event(coredev, BOARD_EVENT_POWER_INIT); + break; + case DVB3_EVENT_FE_LOCK: + if (client->event_fe_state != DVB3_EVENT_FE_LOCK) { + client->event_fe_state = DVB3_EVENT_FE_LOCK; + sms_debug("DVB3_EVENT_FE_LOCK"); + sms_board_event(coredev, BOARD_EVENT_FE_LOCK); + } + break; + case DVB3_EVENT_FE_UNLOCK: + if (client->event_fe_state != DVB3_EVENT_FE_UNLOCK) { + client->event_fe_state = DVB3_EVENT_FE_UNLOCK; + sms_debug("DVB3_EVENT_FE_UNLOCK"); + sms_board_event(coredev, BOARD_EVENT_FE_UNLOCK); + } + break; + case DVB3_EVENT_UNC_OK: + if (client->event_unc_state != DVB3_EVENT_UNC_OK) { + client->event_unc_state = DVB3_EVENT_UNC_OK; + sms_debug("DVB3_EVENT_UNC_OK"); + sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_OK); + } + break; + case DVB3_EVENT_UNC_ERR: + if (client->event_unc_state != DVB3_EVENT_UNC_ERR) { + client->event_unc_state = DVB3_EVENT_UNC_ERR; + sms_debug("DVB3_EVENT_UNC_ERR"); + sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_ERRORS); + } + break; + + default: + sms_err("Unknown dvb3 api event"); + break; + } +} + +static void smsdvb_stats_not_ready(struct dvb_frontend *fe) +{ + struct smsdvb_client_t *client = + container_of(fe, struct smsdvb_client_t, frontend); + struct smscore_device_t *coredev = client->coredev; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int i, n_layers; + + switch (smscore_get_device_mode(coredev)) { + case DEVICE_MODE_ISDBT: + case DEVICE_MODE_ISDBT_BDA: + n_layers = 4; + default: + n_layers = 1; + } + + /* Global stats */ + c->strength.len = 1; + c->cnr.len = 1; + c->strength.stat[0].scale = FE_SCALE_DECIBEL; + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + + /* Per-layer stats */ + c->post_bit_error.len = n_layers; + c->post_bit_count.len = n_layers; + c->block_error.len = n_layers; + c->block_count.len = n_layers; + + /* + * Put all of them at FE_SCALE_NOT_AVAILABLE. They're dynamically + * changed when the stats become available. + */ + for (i = 0; i < n_layers; i++) { + c->post_bit_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->block_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + } +} + +static inline int sms_to_mode(u32 mode) +{ + switch (mode) { + case 2: + return TRANSMISSION_MODE_2K; + case 4: + return TRANSMISSION_MODE_4K; + case 8: + return TRANSMISSION_MODE_8K; + } + return TRANSMISSION_MODE_AUTO; +} + +static inline int sms_to_status(u32 is_demod_locked, u32 is_rf_locked) +{ + if (is_demod_locked) + return FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | + FE_HAS_SYNC | FE_HAS_LOCK; + + if (is_rf_locked) + return FE_HAS_SIGNAL | FE_HAS_CARRIER; + + return 0; +} + +static inline u32 sms_to_bw(u32 value) +{ + return value * 1000000; +} + +#define convert_from_table(value, table, defval) ({ \ + u32 __ret; \ + if (value < ARRAY_SIZE(table)) \ + __ret = table[value]; \ + else \ + __ret = defval; \ + __ret; \ +}) + +#define sms_to_guard_interval(value) \ + convert_from_table(value, sms_to_guard_interval_table, \ + GUARD_INTERVAL_AUTO); + +#define sms_to_code_rate(value) \ + convert_from_table(value, sms_to_code_rate_table, \ + FEC_NONE); + +#define sms_to_hierarchy(value) \ + convert_from_table(value, sms_to_hierarchy_table, \ + FEC_NONE); + +#define sms_to_modulation(value) \ + convert_from_table(value, sms_to_modulation_table, \ + FEC_NONE); + +static void smsdvb_update_tx_params(struct smsdvb_client_t *client, + struct sms_tx_stats *p) +{ + struct dvb_frontend *fe = &client->frontend; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + c->frequency = p->frequency; + client->fe_status = sms_to_status(p->is_demod_locked, 0); + c->bandwidth_hz = sms_to_bw(p->bandwidth); + c->transmission_mode = sms_to_mode(p->transmission_mode); + c->guard_interval = sms_to_guard_interval(p->guard_interval); + c->code_rate_HP = sms_to_code_rate(p->code_rate); + c->code_rate_LP = sms_to_code_rate(p->lp_code_rate); + c->hierarchy = sms_to_hierarchy(p->hierarchy); + c->modulation = sms_to_modulation(p->constellation); +} + +static void smsdvb_update_per_slices(struct smsdvb_client_t *client, + struct RECEPTION_STATISTICS_PER_SLICES_S *p) +{ + struct dvb_frontend *fe = &client->frontend; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u64 tmp; + + client->fe_status = sms_to_status(p->is_demod_locked, p->is_rf_locked); + c->modulation = sms_to_modulation(p->constellation); + + /* signal Strength, in DBm */ + c->strength.stat[0].uvalue = p->in_band_power * 1000; + + /* Carrier to noise ratio, in DB */ + c->cnr.stat[0].svalue = p->snr * 1000; + + /* PER/BER requires demod lock */ + if (!p->is_demod_locked) + return; + + /* TS PER */ + client->last_per = c->block_error.stat[0].uvalue; + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_error.stat[0].uvalue += p->ets_packets; + c->block_count.stat[0].uvalue += p->ets_packets + p->ts_packets; + + /* ber */ + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue += p->ber_error_count; + c->post_bit_count.stat[0].uvalue += p->ber_bit_count; + + /* Legacy PER/BER */ + tmp = p->ets_packets * 65535; + if (p->ts_packets + p->ets_packets) + do_div(tmp, p->ts_packets + p->ets_packets); + client->legacy_per = tmp; +} + +static void smsdvb_update_dvb_stats(struct smsdvb_client_t *client, + struct sms_stats *p) +{ + struct dvb_frontend *fe = &client->frontend; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + if (client->prt_dvb_stats) + client->prt_dvb_stats(client->debug_data, p); + + client->fe_status = sms_to_status(p->is_demod_locked, p->is_rf_locked); + + /* Update DVB modulation parameters */ + c->frequency = p->frequency; + client->fe_status = sms_to_status(p->is_demod_locked, 0); + c->bandwidth_hz = sms_to_bw(p->bandwidth); + c->transmission_mode = sms_to_mode(p->transmission_mode); + c->guard_interval = sms_to_guard_interval(p->guard_interval); + c->code_rate_HP = sms_to_code_rate(p->code_rate); + c->code_rate_LP = sms_to_code_rate(p->lp_code_rate); + c->hierarchy = sms_to_hierarchy(p->hierarchy); + c->modulation = sms_to_modulation(p->constellation); + + /* update reception data */ + c->lna = p->is_external_lna_on ? 1 : 0; + + /* Carrier to noise ratio, in DB */ + c->cnr.stat[0].svalue = p->SNR * 1000; + + /* signal Strength, in DBm */ + c->strength.stat[0].uvalue = p->in_band_pwr * 1000; + + /* PER/BER requires demod lock */ + if (!p->is_demod_locked) + return; + + /* TS PER */ + client->last_per = c->block_error.stat[0].uvalue; + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_error.stat[0].uvalue += p->error_ts_packets; + c->block_count.stat[0].uvalue += p->total_ts_packets; + + /* ber */ + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue += p->ber_error_count; + c->post_bit_count.stat[0].uvalue += p->ber_bit_count; + + /* Legacy PER/BER */ + client->legacy_ber = p->ber; +}; + +static void smsdvb_update_isdbt_stats(struct smsdvb_client_t *client, + struct sms_isdbt_stats *p) +{ + struct dvb_frontend *fe = &client->frontend; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct sms_isdbt_layer_stats *lr; + int i, n_layers; + + if (client->prt_isdb_stats) + client->prt_isdb_stats(client->debug_data, p); + + client->fe_status = sms_to_status(p->is_demod_locked, p->is_rf_locked); + + /* + * Firmware 2.1 seems to report only lock status and + * signal strength. The signal strength indicator is at the + * wrong field. + */ + if (p->statistics_type == 0) { + c->strength.stat[0].uvalue = ((s32)p->transmission_mode) * 1000; + c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + return; + } + + /* Update ISDB-T transmission parameters */ + c->frequency = p->frequency; + c->bandwidth_hz = sms_to_bw(p->bandwidth); + c->transmission_mode = sms_to_mode(p->transmission_mode); + c->guard_interval = sms_to_guard_interval(p->guard_interval); + c->isdbt_partial_reception = p->partial_reception ? 1 : 0; + n_layers = p->num_of_layers; + if (n_layers < 1) + n_layers = 1; + if (n_layers > 3) + n_layers = 3; + c->isdbt_layer_enabled = 0; + + /* update reception data */ + c->lna = p->is_external_lna_on ? 1 : 0; + + /* Carrier to noise ratio, in DB */ + c->cnr.stat[0].svalue = p->SNR * 1000; + + /* signal Strength, in DBm */ + c->strength.stat[0].uvalue = p->in_band_pwr * 1000; + + /* PER/BER and per-layer stats require demod lock */ + if (!p->is_demod_locked) + return; + + client->last_per = c->block_error.stat[0].uvalue; + + /* Clears global counters, as the code below will sum it again */ + c->block_error.stat[0].uvalue = 0; + c->block_count.stat[0].uvalue = 0; + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue = 0; + c->post_bit_count.stat[0].uvalue = 0; + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + + for (i = 0; i < n_layers; i++) { + lr = &p->layer_info[i]; + + /* Update per-layer transmission parameters */ + if (lr->number_of_segments > 0 && lr->number_of_segments < 13) { + c->isdbt_layer_enabled |= 1 << i; + c->layer[i].segment_count = lr->number_of_segments; + } else { + continue; + } + c->layer[i].modulation = sms_to_modulation(lr->constellation); + + /* TS PER */ + c->block_error.stat[i + 1].scale = FE_SCALE_COUNTER; + c->block_count.stat[i + 1].scale = FE_SCALE_COUNTER; + c->block_error.stat[i + 1].uvalue += lr->error_ts_packets; + c->block_count.stat[i + 1].uvalue += lr->total_ts_packets; + + /* Update global PER counter */ + c->block_error.stat[0].uvalue += lr->error_ts_packets; + c->block_count.stat[0].uvalue += lr->total_ts_packets; + + /* BER */ + c->post_bit_error.stat[i + 1].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[i + 1].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[i + 1].uvalue += lr->ber_error_count; + c->post_bit_count.stat[i + 1].uvalue += lr->ber_bit_count; + + /* Update global BER counter */ + c->post_bit_error.stat[0].uvalue += lr->ber_error_count; + c->post_bit_count.stat[0].uvalue += lr->ber_bit_count; + } +} + +static void smsdvb_update_isdbt_stats_ex(struct smsdvb_client_t *client, + struct sms_isdbt_stats_ex *p) +{ + struct dvb_frontend *fe = &client->frontend; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct sms_isdbt_layer_stats *lr; + int i, n_layers; + + if (client->prt_isdb_stats_ex) + client->prt_isdb_stats_ex(client->debug_data, p); + + /* Update ISDB-T transmission parameters */ + c->frequency = p->frequency; + client->fe_status = sms_to_status(p->is_demod_locked, 0); + c->bandwidth_hz = sms_to_bw(p->bandwidth); + c->transmission_mode = sms_to_mode(p->transmission_mode); + c->guard_interval = sms_to_guard_interval(p->guard_interval); + c->isdbt_partial_reception = p->partial_reception ? 1 : 0; + n_layers = p->num_of_layers; + if (n_layers < 1) + n_layers = 1; + if (n_layers > 3) + n_layers = 3; + c->isdbt_layer_enabled = 0; + + /* update reception data */ + c->lna = p->is_external_lna_on ? 1 : 0; + + /* Carrier to noise ratio, in DB */ + c->cnr.stat[0].svalue = p->SNR * 1000; + + /* signal Strength, in DBm */ + c->strength.stat[0].uvalue = p->in_band_pwr * 1000; + + /* PER/BER and per-layer stats require demod lock */ + if (!p->is_demod_locked) + return; + + client->last_per = c->block_error.stat[0].uvalue; + + /* Clears global counters, as the code below will sum it again */ + c->block_error.stat[0].uvalue = 0; + c->block_count.stat[0].uvalue = 0; + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue = 0; + c->post_bit_count.stat[0].uvalue = 0; + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + + c->post_bit_error.len = n_layers + 1; + c->post_bit_count.len = n_layers + 1; + c->block_error.len = n_layers + 1; + c->block_count.len = n_layers + 1; + for (i = 0; i < n_layers; i++) { + lr = &p->layer_info[i]; + + /* Update per-layer transmission parameters */ + if (lr->number_of_segments > 0 && lr->number_of_segments < 13) { + c->isdbt_layer_enabled |= 1 << i; + c->layer[i].segment_count = lr->number_of_segments; + } else { + continue; + } + c->layer[i].modulation = sms_to_modulation(lr->constellation); + + /* TS PER */ + c->block_error.stat[i + 1].scale = FE_SCALE_COUNTER; + c->block_count.stat[i + 1].scale = FE_SCALE_COUNTER; + c->block_error.stat[i + 1].uvalue += lr->error_ts_packets; + c->block_count.stat[i + 1].uvalue += lr->total_ts_packets; + + /* Update global PER counter */ + c->block_error.stat[0].uvalue += lr->error_ts_packets; + c->block_count.stat[0].uvalue += lr->total_ts_packets; + + /* ber */ + c->post_bit_error.stat[i + 1].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[i + 1].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[i + 1].uvalue += lr->ber_error_count; + c->post_bit_count.stat[i + 1].uvalue += lr->ber_bit_count; + + /* Update global ber counter */ + c->post_bit_error.stat[0].uvalue += lr->ber_error_count; + c->post_bit_count.stat[0].uvalue += lr->ber_bit_count; + } +} + +static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb) +{ + struct smsdvb_client_t *client = (struct smsdvb_client_t *) context; + struct sms_msg_hdr *phdr = (struct sms_msg_hdr *) (((u8 *) cb->p) + + cb->offset); + void *p = phdr + 1; + struct dvb_frontend *fe = &client->frontend; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + bool is_status_update = false; + + switch (phdr->msg_type) { + case MSG_SMS_DVBT_BDA_DATA: + /* + * Only feed data to dvb demux if are there any feed listening + * to it and if the device has tuned + */ + if (client->feed_users && client->has_tuned) + dvb_dmx_swfilter(&client->demux, p, + cb->size - sizeof(struct sms_msg_hdr)); + break; + + case MSG_SMS_RF_TUNE_RES: + case MSG_SMS_ISDBT_TUNE_RES: + complete(&client->tune_done); + break; + + case MSG_SMS_SIGNAL_DETECTED_IND: + client->fe_status = FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | + FE_HAS_LOCK; + + is_status_update = true; + break; + + case MSG_SMS_NO_SIGNAL_IND: + client->fe_status = 0; + + is_status_update = true; + break; + + case MSG_SMS_TRANSMISSION_IND: + smsdvb_update_tx_params(client, p); + + is_status_update = true; + break; + + case MSG_SMS_HO_PER_SLICES_IND: + smsdvb_update_per_slices(client, p); + + is_status_update = true; + break; + + case MSG_SMS_GET_STATISTICS_RES: + switch (smscore_get_device_mode(client->coredev)) { + case DEVICE_MODE_ISDBT: + case DEVICE_MODE_ISDBT_BDA: + smsdvb_update_isdbt_stats(client, p); + break; + default: + /* Skip sms_msg_statistics_info:request_result field */ + smsdvb_update_dvb_stats(client, p + sizeof(u32)); + } + + is_status_update = true; + break; + + /* Only for ISDB-T */ + case MSG_SMS_GET_STATISTICS_EX_RES: + /* Skip sms_msg_statistics_info:request_result field? */ + smsdvb_update_isdbt_stats_ex(client, p + sizeof(u32)); + is_status_update = true; + break; + default: + sms_info("message not handled"); + } + smscore_putbuffer(client->coredev, cb); + + if (is_status_update) { + if (client->fe_status & FE_HAS_LOCK) { + sms_board_dvb3_event(client, DVB3_EVENT_FE_LOCK); + if (client->last_per == c->block_error.stat[0].uvalue) + sms_board_dvb3_event(client, DVB3_EVENT_UNC_OK); + else + sms_board_dvb3_event(client, DVB3_EVENT_UNC_ERR); + client->has_tuned = true; + } else { + smsdvb_stats_not_ready(fe); + client->has_tuned = false; + sms_board_dvb3_event(client, DVB3_EVENT_FE_UNLOCK); + } + complete(&client->stats_done); + } + + return 0; +} + +static void smsdvb_unregister_client(struct smsdvb_client_t *client) +{ + /* must be called under clientslock */ + + list_del(&client->entry); + + smsdvb_debugfs_release(client); + smscore_unregister_client(client->smsclient); + dvb_unregister_frontend(&client->frontend); + dvb_dmxdev_release(&client->dmxdev); + dvb_dmx_release(&client->demux); + dvb_unregister_adapter(&client->adapter); + kfree(client); +} + +static void smsdvb_onremove(void *context) +{ + kmutex_lock(&g_smsdvb_clientslock); + + smsdvb_unregister_client((struct smsdvb_client_t *) context); + + kmutex_unlock(&g_smsdvb_clientslock); +} + +static int smsdvb_start_feed(struct dvb_demux_feed *feed) +{ + struct smsdvb_client_t *client = + container_of(feed->demux, struct smsdvb_client_t, demux); + struct sms_msg_data pid_msg; + + sms_debug("add pid %d(%x)", + feed->pid, feed->pid); + + client->feed_users++; + + pid_msg.x_msg_header.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + pid_msg.x_msg_header.msg_dst_id = HIF_TASK; + pid_msg.x_msg_header.msg_flags = 0; + pid_msg.x_msg_header.msg_type = MSG_SMS_ADD_PID_FILTER_REQ; + pid_msg.x_msg_header.msg_length = sizeof(pid_msg); + pid_msg.msg_data[0] = feed->pid; + + return smsclient_sendrequest(client->smsclient, + &pid_msg, sizeof(pid_msg)); +} + +static int smsdvb_stop_feed(struct dvb_demux_feed *feed) +{ + struct smsdvb_client_t *client = + container_of(feed->demux, struct smsdvb_client_t, demux); + struct sms_msg_data pid_msg; + + sms_debug("remove pid %d(%x)", + feed->pid, feed->pid); + + client->feed_users--; + + pid_msg.x_msg_header.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + pid_msg.x_msg_header.msg_dst_id = HIF_TASK; + pid_msg.x_msg_header.msg_flags = 0; + pid_msg.x_msg_header.msg_type = MSG_SMS_REMOVE_PID_FILTER_REQ; + pid_msg.x_msg_header.msg_length = sizeof(pid_msg); + pid_msg.msg_data[0] = feed->pid; + + return smsclient_sendrequest(client->smsclient, + &pid_msg, sizeof(pid_msg)); +} + +static int smsdvb_sendrequest_and_wait(struct smsdvb_client_t *client, + void *buffer, size_t size, + struct completion *completion) +{ + int rc; + + rc = smsclient_sendrequest(client->smsclient, buffer, size); + if (rc < 0) + return rc; + + return wait_for_completion_timeout(completion, + msecs_to_jiffies(2000)) ? + 0 : -ETIME; +} + +static int smsdvb_send_statistics_request(struct smsdvb_client_t *client) +{ + int rc; + struct sms_msg_hdr msg; + + /* Don't request stats too fast */ + if (client->get_stats_jiffies && + (!time_after(jiffies, client->get_stats_jiffies))) + return 0; + client->get_stats_jiffies = jiffies + msecs_to_jiffies(100); + + msg.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + msg.msg_dst_id = HIF_TASK; + msg.msg_flags = 0; + msg.msg_length = sizeof(msg); + + switch (smscore_get_device_mode(client->coredev)) { + case DEVICE_MODE_ISDBT: + case DEVICE_MODE_ISDBT_BDA: + /* + * Check for firmware version, to avoid breaking for old cards + */ + if (client->coredev->fw_version >= 0x800) + msg.msg_type = MSG_SMS_GET_STATISTICS_EX_REQ; + else + msg.msg_type = MSG_SMS_GET_STATISTICS_REQ; + break; + default: + msg.msg_type = MSG_SMS_GET_STATISTICS_REQ; + } + + rc = smsdvb_sendrequest_and_wait(client, &msg, sizeof(msg), + &client->stats_done); + + return rc; +} + +static inline int led_feedback(struct smsdvb_client_t *client) +{ + if (!(client->fe_status & FE_HAS_LOCK)) + return sms_board_led_feedback(client->coredev, SMS_LED_OFF); + + return sms_board_led_feedback(client->coredev, + (client->legacy_ber == 0) ? + SMS_LED_HI : SMS_LED_LO); +} + +static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat) +{ + int rc; + struct smsdvb_client_t *client; + client = container_of(fe, struct smsdvb_client_t, frontend); + + rc = smsdvb_send_statistics_request(client); + + *stat = client->fe_status; + + led_feedback(client); + + return rc; +} + +static int smsdvb_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + int rc; + struct smsdvb_client_t *client; + + client = container_of(fe, struct smsdvb_client_t, frontend); + + rc = smsdvb_send_statistics_request(client); + + *ber = client->legacy_ber; + + led_feedback(client); + + return rc; +} + +static int smsdvb_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc; + s32 power = (s32) c->strength.stat[0].uvalue; + struct smsdvb_client_t *client; + + client = container_of(fe, struct smsdvb_client_t, frontend); + + rc = smsdvb_send_statistics_request(client); + + if (power < -95) + *strength = 0; + else if (power > -29) + *strength = 65535; + else + *strength = (power + 95) * 65535 / 66; + + led_feedback(client); + + return rc; +} + +static int smsdvb_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc; + struct smsdvb_client_t *client; + + client = container_of(fe, struct smsdvb_client_t, frontend); + + rc = smsdvb_send_statistics_request(client); + + /* Preferred scale for SNR with legacy API: 0.1 dB */ + *snr = ((u32)c->cnr.stat[0].svalue) / 100; + + led_feedback(client); + + return rc; +} + +static int smsdvb_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + int rc; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct smsdvb_client_t *client; + + client = container_of(fe, struct smsdvb_client_t, frontend); + + rc = smsdvb_send_statistics_request(client); + + *ucblocks = c->block_error.stat[0].uvalue; + + led_feedback(client); + + return rc; +} + +static int smsdvb_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + sms_debug(""); + + tune->min_delay_ms = 400; + tune->step_size = 250000; + tune->max_drift = 0; + return 0; +} + +static int smsdvb_dvbt_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct smsdvb_client_t *client = + container_of(fe, struct smsdvb_client_t, frontend); + + struct { + struct sms_msg_hdr msg; + u32 Data[3]; + } msg; + + int ret; + + client->fe_status = 0; + client->event_fe_state = -1; + client->event_unc_state = -1; + fe->dtv_property_cache.delivery_system = SYS_DVBT; + + msg.msg.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + msg.msg.msg_dst_id = HIF_TASK; + msg.msg.msg_flags = 0; + msg.msg.msg_type = MSG_SMS_RF_TUNE_REQ; + msg.msg.msg_length = sizeof(msg); + msg.Data[0] = c->frequency; + msg.Data[2] = 12000000; + + sms_info("%s: freq %d band %d", __func__, c->frequency, + c->bandwidth_hz); + + switch (c->bandwidth_hz / 1000000) { + case 8: + msg.Data[1] = BW_8_MHZ; + break; + case 7: + msg.Data[1] = BW_7_MHZ; + break; + case 6: + msg.Data[1] = BW_6_MHZ; + break; + case 0: + return -EOPNOTSUPP; + default: + return -EINVAL; + } + /* Disable LNA, if any. An error is returned if no LNA is present */ + ret = sms_board_lna_control(client->coredev, 0); + if (ret == 0) { + fe_status_t status; + + /* tune with LNA off at first */ + ret = smsdvb_sendrequest_and_wait(client, &msg, sizeof(msg), + &client->tune_done); + + smsdvb_read_status(fe, &status); + + if (status & FE_HAS_LOCK) + return ret; + + /* previous tune didn't lock - enable LNA and tune again */ + sms_board_lna_control(client->coredev, 1); + } + + return smsdvb_sendrequest_and_wait(client, &msg, sizeof(msg), + &client->tune_done); +} + +static int smsdvb_isdbt_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct smsdvb_client_t *client = + container_of(fe, struct smsdvb_client_t, frontend); + int board_id = smscore_get_board_id(client->coredev); + struct sms_board *board = sms_get_board(board_id); + enum sms_device_type_st type = board->type; + int ret; + + struct { + struct sms_msg_hdr msg; + u32 Data[4]; + } msg; + + fe->dtv_property_cache.delivery_system = SYS_ISDBT; + + msg.msg.msg_src_id = DVBT_BDA_CONTROL_MSG_ID; + msg.msg.msg_dst_id = HIF_TASK; + msg.msg.msg_flags = 0; + msg.msg.msg_type = MSG_SMS_ISDBT_TUNE_REQ; + msg.msg.msg_length = sizeof(msg); + + if (c->isdbt_sb_segment_idx == -1) + c->isdbt_sb_segment_idx = 0; + + if (!c->isdbt_layer_enabled) + c->isdbt_layer_enabled = 7; + + msg.Data[0] = c->frequency; + msg.Data[1] = BW_ISDBT_1SEG; + msg.Data[2] = 12000000; + msg.Data[3] = c->isdbt_sb_segment_idx; + + if (c->isdbt_partial_reception) { + if ((type == SMS_PELE || type == SMS_RIO) && + c->isdbt_sb_segment_count > 3) + msg.Data[1] = BW_ISDBT_13SEG; + else if (c->isdbt_sb_segment_count > 1) + msg.Data[1] = BW_ISDBT_3SEG; + } else if (type == SMS_PELE || type == SMS_RIO) + msg.Data[1] = BW_ISDBT_13SEG; + + c->bandwidth_hz = 6000000; + + sms_info("%s: freq %d segwidth %d segindex %d", __func__, + c->frequency, c->isdbt_sb_segment_count, + c->isdbt_sb_segment_idx); + + /* Disable LNA, if any. An error is returned if no LNA is present */ + ret = sms_board_lna_control(client->coredev, 0); + if (ret == 0) { + fe_status_t status; + + /* tune with LNA off at first */ + ret = smsdvb_sendrequest_and_wait(client, &msg, sizeof(msg), + &client->tune_done); + + smsdvb_read_status(fe, &status); + + if (status & FE_HAS_LOCK) + return ret; + + /* previous tune didn't lock - enable LNA and tune again */ + sms_board_lna_control(client->coredev, 1); + } + return smsdvb_sendrequest_and_wait(client, &msg, sizeof(msg), + &client->tune_done); +} + +static int smsdvb_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct smsdvb_client_t *client = + container_of(fe, struct smsdvb_client_t, frontend); + struct smscore_device_t *coredev = client->coredev; + + smsdvb_stats_not_ready(fe); + c->strength.stat[0].uvalue = 0; + c->cnr.stat[0].uvalue = 0; + + client->has_tuned = false; + + switch (smscore_get_device_mode(coredev)) { + case DEVICE_MODE_DVBT: + case DEVICE_MODE_DVBT_BDA: + return smsdvb_dvbt_set_frontend(fe); + case DEVICE_MODE_ISDBT: + case DEVICE_MODE_ISDBT_BDA: + return smsdvb_isdbt_set_frontend(fe); + default: + return -EINVAL; + } +} + +/* Nothing to do here, as stats are automatically updated */ +static int smsdvb_get_frontend(struct dvb_frontend *fe) +{ + return 0; +} + +static int smsdvb_init(struct dvb_frontend *fe) +{ + struct smsdvb_client_t *client = + container_of(fe, struct smsdvb_client_t, frontend); + + sms_board_power(client->coredev, 1); + + sms_board_dvb3_event(client, DVB3_EVENT_INIT); + return 0; +} + +static int smsdvb_sleep(struct dvb_frontend *fe) +{ + struct smsdvb_client_t *client = + container_of(fe, struct smsdvb_client_t, frontend); + + sms_board_led_feedback(client->coredev, SMS_LED_OFF); + sms_board_power(client->coredev, 0); + + sms_board_dvb3_event(client, DVB3_EVENT_SLEEP); + + return 0; +} + +static void smsdvb_release(struct dvb_frontend *fe) +{ + /* do nothing */ +} + +static struct dvb_frontend_ops smsdvb_fe_ops = { + .info = { + .name = "Siano Mobile Digital MDTV Receiver", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 250000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = smsdvb_release, + + .set_frontend = smsdvb_set_frontend, + .get_frontend = smsdvb_get_frontend, + .get_tune_settings = smsdvb_get_tune_settings, + + .read_status = smsdvb_read_status, + .read_ber = smsdvb_read_ber, + .read_signal_strength = smsdvb_read_signal_strength, + .read_snr = smsdvb_read_snr, + .read_ucblocks = smsdvb_read_ucblocks, + + .init = smsdvb_init, + .sleep = smsdvb_sleep, +}; + +static int smsdvb_hotplug(struct smscore_device_t *coredev, + struct device *device, int arrival) +{ + struct smsclient_params_t params; + struct smsdvb_client_t *client; + int rc; + + /* device removal handled by onremove callback */ + if (!arrival) + return 0; + client = kzalloc(sizeof(struct smsdvb_client_t), GFP_KERNEL); + if (!client) { + sms_err("kmalloc() failed"); + return -ENOMEM; + } + + /* register dvb adapter */ + rc = dvb_register_adapter(&client->adapter, + sms_get_board( + smscore_get_board_id(coredev))->name, + THIS_MODULE, device, adapter_nr); + if (rc < 0) { + sms_err("dvb_register_adapter() failed %d", rc); + goto adapter_error; + } + + /* init dvb demux */ + client->demux.dmx.capabilities = DMX_TS_FILTERING; + client->demux.filternum = 32; /* todo: nova ??? */ + client->demux.feednum = 32; + client->demux.start_feed = smsdvb_start_feed; + client->demux.stop_feed = smsdvb_stop_feed; + + rc = dvb_dmx_init(&client->demux); + if (rc < 0) { + sms_err("dvb_dmx_init failed %d", rc); + goto dvbdmx_error; + } + + /* init dmxdev */ + client->dmxdev.filternum = 32; + client->dmxdev.demux = &client->demux.dmx; + client->dmxdev.capabilities = 0; + + rc = dvb_dmxdev_init(&client->dmxdev, &client->adapter); + if (rc < 0) { + sms_err("dvb_dmxdev_init failed %d", rc); + goto dmxdev_error; + } + + /* init and register frontend */ + memcpy(&client->frontend.ops, &smsdvb_fe_ops, + sizeof(struct dvb_frontend_ops)); + + switch (smscore_get_device_mode(coredev)) { + case DEVICE_MODE_DVBT: + case DEVICE_MODE_DVBT_BDA: + client->frontend.ops.delsys[0] = SYS_DVBT; + break; + case DEVICE_MODE_ISDBT: + case DEVICE_MODE_ISDBT_BDA: + client->frontend.ops.delsys[0] = SYS_ISDBT; + break; + } + + rc = dvb_register_frontend(&client->adapter, &client->frontend); + if (rc < 0) { + sms_err("frontend registration failed %d", rc); + goto frontend_error; + } + + params.initial_id = 1; + params.data_type = MSG_SMS_DVBT_BDA_DATA; + params.onresponse_handler = smsdvb_onresponse; + params.onremove_handler = smsdvb_onremove; + params.context = client; + + rc = smscore_register_client(coredev, ¶ms, &client->smsclient); + if (rc < 0) { + sms_err("smscore_register_client() failed %d", rc); + goto client_error; + } + + client->coredev = coredev; + + init_completion(&client->tune_done); + init_completion(&client->stats_done); + + kmutex_lock(&g_smsdvb_clientslock); + + list_add(&client->entry, &g_smsdvb_clients); + + kmutex_unlock(&g_smsdvb_clientslock); + + client->event_fe_state = -1; + client->event_unc_state = -1; + sms_board_dvb3_event(client, DVB3_EVENT_HOTPLUG); + + sms_info("success"); + sms_board_setup(coredev); + + if (smsdvb_debugfs_create(client) < 0) + sms_info("failed to create debugfs node"); + + return 0; + +client_error: + dvb_unregister_frontend(&client->frontend); + +frontend_error: + dvb_dmxdev_release(&client->dmxdev); + +dmxdev_error: + dvb_dmx_release(&client->demux); + +dvbdmx_error: + dvb_unregister_adapter(&client->adapter); + +adapter_error: + kfree(client); + return rc; +} + +static int __init smsdvb_module_init(void) +{ + int rc; + + INIT_LIST_HEAD(&g_smsdvb_clients); + kmutex_init(&g_smsdvb_clientslock); + + smsdvb_debugfs_register(); + + rc = smscore_register_hotplug(smsdvb_hotplug); + + sms_debug(""); + + return rc; +} + +static void __exit smsdvb_module_exit(void) +{ + smscore_unregister_hotplug(smsdvb_hotplug); + + kmutex_lock(&g_smsdvb_clientslock); + + while (!list_empty(&g_smsdvb_clients)) + smsdvb_unregister_client((struct smsdvb_client_t *)g_smsdvb_clients.next); + + smsdvb_debugfs_unregister(); + + kmutex_unlock(&g_smsdvb_clientslock); +} + +module_init(smsdvb_module_init); +module_exit(smsdvb_module_exit); + +MODULE_DESCRIPTION("SMS DVB subsystem adaptation module"); +MODULE_AUTHOR("Siano Mobile Silicon, Inc. (uris@siano-ms.com)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/siano/smsdvb.h b/drivers/media/common/siano/smsdvb.h new file mode 100644 index 00000000..92c413ba --- /dev/null +++ b/drivers/media/common/siano/smsdvb.h @@ -0,0 +1,130 @@ +/*********************************************************************** + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + ***********************************************************************/ + +struct smsdvb_debugfs; +struct smsdvb_client_t; + +typedef void (*sms_prt_dvb_stats_t)(struct smsdvb_debugfs *debug_data, + struct sms_stats *p); + +typedef void (*sms_prt_isdb_stats_t)(struct smsdvb_debugfs *debug_data, + struct sms_isdbt_stats *p); + +typedef void (*sms_prt_isdb_stats_ex_t) + (struct smsdvb_debugfs *debug_data, + struct sms_isdbt_stats_ex *p); + + +struct smsdvb_client_t { + struct list_head entry; + + struct smscore_device_t *coredev; + struct smscore_client_t *smsclient; + + struct dvb_adapter adapter; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dvb_frontend frontend; + + fe_status_t fe_status; + + struct completion tune_done; + struct completion stats_done; + + int last_per; + + int legacy_ber, legacy_per; + + int event_fe_state; + int event_unc_state; + + unsigned long get_stats_jiffies; + + int feed_users; + bool has_tuned; + + /* stats debugfs data */ + struct dentry *debugfs; + + struct smsdvb_debugfs *debug_data; + + sms_prt_dvb_stats_t prt_dvb_stats; + sms_prt_isdb_stats_t prt_isdb_stats; + sms_prt_isdb_stats_ex_t prt_isdb_stats_ex; +}; + +/* + * This struct is a mix of struct sms_rx_stats_ex and + * struct sms_srvm_signal_status. + * It was obtained by comparing the way it was filled by the original code + */ +struct RECEPTION_STATISTICS_PER_SLICES_S { + u32 result; + u32 snr; + s32 in_band_power; + u32 ts_packets; + u32 ets_packets; + u32 constellation; + u32 hp_code; + u32 tps_srv_ind_lp; + u32 tps_srv_ind_hp; + u32 cell_id; + u32 reason; + u32 request_id; + u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */ + + u32 ber; /* Post Viterbi BER [1E-5] */ + s32 RSSI; /* dBm */ + s32 carrier_offset; /* Carrier Offset in bin/1024 */ + + u32 is_rf_locked; /* 0 - not locked, 1 - locked */ + u32 is_demod_locked; /* 0 - not locked, 1 - locked */ + + u32 ber_bit_count; /* Total number of SYNC bits. */ + u32 ber_error_count; /* Number of erronous SYNC bits. */ + + s32 MRC_SNR; /* dB */ + s32 mrc_in_band_pwr; /* In band power in dBM */ + s32 MRC_RSSI; /* dBm */ +}; + +/* From smsdvb-debugfs.c */ +#ifdef CONFIG_SMS_SIANO_DEBUGFS + +int smsdvb_debugfs_create(struct smsdvb_client_t *client); +void smsdvb_debugfs_release(struct smsdvb_client_t *client); +int smsdvb_debugfs_register(void); +void smsdvb_debugfs_unregister(void); + +#else + +static inline int smsdvb_debugfs_create(struct smsdvb_client_t *client) +{ + return 0; +} + +static inline void smsdvb_debugfs_release(struct smsdvb_client_t *client) {} + +static inline int smsdvb_debugfs_register(void) +{ + return 0; +}; + +static inline void smsdvb_debugfs_unregister(void) {}; + +#endif + diff --git a/drivers/media/common/siano/smsendian.c b/drivers/media/common/siano/smsendian.c new file mode 100644 index 00000000..bfe831c1 --- /dev/null +++ b/drivers/media/common/siano/smsendian.c @@ -0,0 +1,103 @@ +/**************************************************************** + + Siano Mobile Silicon, Inc. + MDTV receiver kernel modules. + Copyright (C) 2006-2009, Uri Shkolnik + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + + ****************************************************************/ + +#include +#include + +#include "smsendian.h" +#include "smscoreapi.h" + +void smsendian_handle_tx_message(void *buffer) +{ +#ifdef __BIG_ENDIAN + struct sms_msg_data *msg = (struct sms_msg_data *)buffer; + int i; + int msg_words; + + switch (msg->x_msg_header.msg_type) { + case MSG_SMS_DATA_DOWNLOAD_REQ: + { + msg->msg_data[0] = le32_to_cpu(msg->msg_data[0]); + break; + } + + default: + msg_words = (msg->x_msg_header.msg_length - + sizeof(struct sms_msg_hdr))/4; + + for (i = 0; i < msg_words; i++) + msg->msg_data[i] = le32_to_cpu(msg->msg_data[i]); + + break; + } +#endif /* __BIG_ENDIAN */ +} +EXPORT_SYMBOL_GPL(smsendian_handle_tx_message); + +void smsendian_handle_rx_message(void *buffer) +{ +#ifdef __BIG_ENDIAN + struct sms_msg_data *msg = (struct sms_msg_data *)buffer; + int i; + int msg_words; + + switch (msg->x_msg_header.msg_type) { + case MSG_SMS_GET_VERSION_EX_RES: + { + struct sms_version_res *ver = + (struct sms_version_res *) msg; + ver->chip_model = le16_to_cpu(ver->chip_model); + break; + } + + case MSG_SMS_DVBT_BDA_DATA: + case MSG_SMS_DAB_CHANNEL: + case MSG_SMS_DATA_MSG: + { + break; + } + + default: + { + msg_words = (msg->x_msg_header.msg_length - + sizeof(struct sms_msg_hdr))/4; + + for (i = 0; i < msg_words; i++) + msg->msg_data[i] = le32_to_cpu(msg->msg_data[i]); + + break; + } + } +#endif /* __BIG_ENDIAN */ +} +EXPORT_SYMBOL_GPL(smsendian_handle_rx_message); + +void smsendian_handle_message_header(void *msg) +{ +#ifdef __BIG_ENDIAN + struct sms_msg_hdr *phdr = (struct sms_msg_hdr *)msg; + + phdr->msg_type = le16_to_cpu(phdr->msg_type); + phdr->msg_length = le16_to_cpu(phdr->msg_length); + phdr->msg_flags = le16_to_cpu(phdr->msg_flags); +#endif /* __BIG_ENDIAN */ +} +EXPORT_SYMBOL_GPL(smsendian_handle_message_header); diff --git a/drivers/media/common/siano/smsendian.h b/drivers/media/common/siano/smsendian.h new file mode 100644 index 00000000..1624d6fd --- /dev/null +++ b/drivers/media/common/siano/smsendian.h @@ -0,0 +1,32 @@ +/**************************************************************** + +Siano Mobile Silicon, Inc. +MDTV receiver kernel modules. +Copyright (C) 2006-2009, Uri Shkolnik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + + This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +****************************************************************/ + +#ifndef __SMS_ENDIAN_H__ +#define __SMS_ENDIAN_H__ + +#include + +extern void smsendian_handle_tx_message(void *buffer); +extern void smsendian_handle_rx_message(void *buffer); +extern void smsendian_handle_message_header(void *msg); + +#endif /* __SMS_ENDIAN_H__ */ + diff --git a/drivers/media/common/siano/smsir.c b/drivers/media/common/siano/smsir.c new file mode 100644 index 00000000..b8c5cad7 --- /dev/null +++ b/drivers/media/common/siano/smsir.c @@ -0,0 +1,114 @@ +/**************************************************************** + + Siano Mobile Silicon, Inc. + MDTV receiver kernel modules. + Copyright (C) 2006-2009, Uri Shkolnik + + Copyright (c) 2010 - Mauro Carvalho Chehab + - Ported the driver to use rc-core + - IR raw event decoding is now done at rc-core + - Code almost re-written + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + + ****************************************************************/ + + +#include +#include + +#include "smscoreapi.h" +#include "smsir.h" +#include "sms-cards.h" + +#define MODULE_NAME "smsmdtv" + +void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len) +{ + int i; + const s32 *samples = (const void *)buf; + + for (i = 0; i < len >> 2; i++) { + DEFINE_IR_RAW_EVENT(ev); + + ev.duration = abs(samples[i]) * 1000; /* Convert to ns */ + ev.pulse = (samples[i] > 0) ? false : true; + + ir_raw_event_store(coredev->ir.dev, &ev); + } + ir_raw_event_handle(coredev->ir.dev); +} + +int sms_ir_init(struct smscore_device_t *coredev) +{ + int err; + int board_id = smscore_get_board_id(coredev); + struct rc_dev *dev; + + sms_log("Allocating rc device"); + dev = rc_allocate_device(); + if (!dev) { + sms_err("Not enough memory"); + return -ENOMEM; + } + + coredev->ir.controller = 0; /* Todo: vega/nova SPI number */ + coredev->ir.timeout = IR_DEFAULT_TIMEOUT; + sms_log("IR port %d, timeout %d ms", + coredev->ir.controller, coredev->ir.timeout); + + snprintf(coredev->ir.name, sizeof(coredev->ir.name), + "SMS IR (%s)", sms_get_board(board_id)->name); + + strlcpy(coredev->ir.phys, coredev->devpath, sizeof(coredev->ir.phys)); + strlcat(coredev->ir.phys, "/ir0", sizeof(coredev->ir.phys)); + + dev->input_name = coredev->ir.name; + dev->input_phys = coredev->ir.phys; + dev->dev.parent = coredev->device; + +#if 0 + /* TODO: properly initialize the parameters bellow */ + dev->input_id.bustype = BUS_USB; + dev->input_id.version = 1; + dev->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); + dev->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct); +#endif + + dev->priv = coredev; + dev->driver_type = RC_DRIVER_IR_RAW; + dev->allowed_protos = RC_BIT_ALL; + dev->map_name = sms_get_board(board_id)->rc_codes; + dev->driver_name = MODULE_NAME; + + sms_log("Input device (IR) %s is set for key events", dev->input_name); + + err = rc_register_device(dev); + if (err < 0) { + sms_err("Failed to register device"); + rc_free_device(dev); + return err; + } + + coredev->ir.dev = dev; + return 0; +} + +void sms_ir_exit(struct smscore_device_t *coredev) +{ + if (coredev->ir.dev) + rc_unregister_device(coredev->ir.dev); + + sms_log(""); +} diff --git a/drivers/media/common/siano/smsir.h b/drivers/media/common/siano/smsir.h new file mode 100644 index 00000000..fc8b7925 --- /dev/null +++ b/drivers/media/common/siano/smsir.h @@ -0,0 +1,63 @@ +/**************************************************************** + +Siano Mobile Silicon, Inc. +MDTV receiver kernel modules. +Copyright (C) 2006-2009, Uri Shkolnik + + Copyright (c) 2010 - Mauro Carvalho Chehab + - Ported the driver to use rc-core + - IR raw event decoding is now done at rc-core + - Code almost re-written + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + + This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +****************************************************************/ + +#ifndef __SMS_IR_H__ +#define __SMS_IR_H__ + +#include +#include + +#define IR_DEFAULT_TIMEOUT 100 + +struct smscore_device_t; + +struct ir_t { + struct rc_dev *dev; + char name[40]; + char phys[32]; + + char *rc_codes; + + u32 timeout; + u32 controller; +}; + +#ifdef CONFIG_SMS_SIANO_RC +int sms_ir_init(struct smscore_device_t *coredev); +void sms_ir_exit(struct smscore_device_t *coredev); +void sms_ir_event(struct smscore_device_t *coredev, + const char *buf, int len); +#else +inline static int sms_ir_init(struct smscore_device_t *coredev) { + return 0; +} +inline static void sms_ir_exit(struct smscore_device_t *coredev) {}; +inline static void sms_ir_event(struct smscore_device_t *coredev, + const char *buf, int len) {}; +#endif + +#endif /* __SMS_IR_H__ */ + diff --git a/drivers/media/common/tveeprom.c b/drivers/media/common/tveeprom.c new file mode 100644 index 00000000..cc1e172d --- /dev/null +++ b/drivers/media/common/tveeprom.c @@ -0,0 +1,786 @@ +/* + * tveeprom - eeprom decoder for tvcard configuration eeproms + * + * Data and decoding routines shamelessly borrowed from bttv-cards.c + * eeprom access routine shamelessly borrowed from bttv-if.c + * which are: + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) + (c) 1999-2001 Gerd Knorr + + * Adjustments to fit a more general model and all bugs: + + Copyright (C) 2003 John Klar + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver"); +MODULE_AUTHOR("John Klar"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#define STRM(array, i) \ + (i < sizeof(array) / sizeof(char *) ? array[i] : "unknown") + +#define tveeprom_info(fmt, arg...) \ + v4l_printk(KERN_INFO, "tveeprom", c->adapter, c->addr, fmt , ## arg) +#define tveeprom_warn(fmt, arg...) \ + v4l_printk(KERN_WARNING, "tveeprom", c->adapter, c->addr, fmt , ## arg) +#define tveeprom_dbg(fmt, arg...) do { \ + if (debug) \ + v4l_printk(KERN_DEBUG, "tveeprom", \ + c->adapter, c->addr, fmt , ## arg); \ + } while (0) + +/* + * The Hauppauge eeprom uses an 8bit field to determine which + * tuner formats the tuner supports. + */ +static struct HAUPPAUGE_TUNER_FMT +{ + int id; + char *name; +} +hauppauge_tuner_fmt[] = +{ + { V4L2_STD_UNKNOWN, " UNKNOWN" }, + { V4L2_STD_UNKNOWN, " FM" }, + { V4L2_STD_B|V4L2_STD_GH, " PAL(B/G)" }, + { V4L2_STD_MN, " NTSC(M)" }, + { V4L2_STD_PAL_I, " PAL(I)" }, + { V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC, " SECAM(L/L')" }, + { V4L2_STD_DK, " PAL(D/D1/K)" }, + { V4L2_STD_ATSC, " ATSC/DVB Digital" }, +}; + +/* This is the full list of possible tuners. Many thanks to Hauppauge for + supplying this information. Note that many tuners where only used for + testing and never made it to the outside world. So you will only see + a subset in actual produced cards. */ +static struct HAUPPAUGE_TUNER +{ + int id; + char *name; +} +hauppauge_tuner[] = +{ + /* 0-9 */ + { TUNER_ABSENT, "None" }, + { TUNER_ABSENT, "External" }, + { TUNER_ABSENT, "Unspecified" }, + { TUNER_PHILIPS_PAL, "Philips FI1216" }, + { TUNER_PHILIPS_SECAM, "Philips FI1216MF" }, + { TUNER_PHILIPS_NTSC, "Philips FI1236" }, + { TUNER_PHILIPS_PAL_I, "Philips FI1246" }, + { TUNER_PHILIPS_PAL_DK, "Philips FI1256" }, + { TUNER_PHILIPS_PAL, "Philips FI1216 MK2" }, + { TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" }, + /* 10-19 */ + { TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" }, + { TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" }, + { TUNER_PHILIPS_PAL_DK, "Philips FI1256 MK2" }, + { TUNER_TEMIC_NTSC, "Temic 4032FY5" }, + { TUNER_TEMIC_PAL, "Temic 4002FH5" }, + { TUNER_TEMIC_PAL_I, "Temic 4062FY5" }, + { TUNER_PHILIPS_PAL, "Philips FR1216 MK2" }, + { TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" }, + { TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" }, + { TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" }, + /* 20-29 */ + { TUNER_PHILIPS_PAL_DK, "Philips FR1256 MK2" }, + { TUNER_PHILIPS_PAL, "Philips FM1216" }, + { TUNER_PHILIPS_SECAM, "Philips FM1216MF" }, + { TUNER_PHILIPS_NTSC, "Philips FM1236" }, + { TUNER_PHILIPS_PAL_I, "Philips FM1246" }, + { TUNER_PHILIPS_PAL_DK, "Philips FM1256" }, + { TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" }, + { TUNER_ABSENT, "Samsung TCPN9082D" }, + { TUNER_ABSENT, "Samsung TCPM9092P" }, + { TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" }, + /* 30-39 */ + { TUNER_ABSENT, "Samsung TCPN9085D" }, + { TUNER_ABSENT, "Samsung TCPB9085P" }, + { TUNER_ABSENT, "Samsung TCPL9091P" }, + { TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" }, + { TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" }, + { TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" }, + { TUNER_PHILIPS_NTSC, "Philips TD1536" }, + { TUNER_PHILIPS_NTSC, "Philips TD1536D" }, + { TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */ + { TUNER_ABSENT, "Philips FI1256MP" }, + /* 40-49 */ + { TUNER_ABSENT, "Samsung TCPQ9091P" }, + { TUNER_TEMIC_4006FN5_MULTI_PAL,"Temic 4006FN5" }, + { TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" }, + { TUNER_TEMIC_4046FM5, "Temic 4046FM5" }, + { TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" }, + { TUNER_ABSENT, "Philips TD1536D FH 44"}, + { TUNER_LG_NTSC_FM, "LG TP18NSR01F"}, + { TUNER_LG_PAL_FM, "LG TP18PSB01D"}, + { TUNER_LG_PAL, "LG TP18PSB11D"}, + { TUNER_LG_PAL_I_FM, "LG TAPC-I001D"}, + /* 50-59 */ + { TUNER_LG_PAL_I, "LG TAPC-I701D"}, + { TUNER_ABSENT, "Temic 4042FI5"}, + { TUNER_MICROTUNE_4049FM5, "Microtune 4049 FM5"}, + { TUNER_ABSENT, "LG TPI8NSR11F"}, + { TUNER_ABSENT, "Microtune 4049 FM5 Alt I2C"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FQ1216ME MK3"}, + { TUNER_ABSENT, "Philips FI1236 MK3"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FM1216 ME MK3"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FM1236 MK3"}, + { TUNER_ABSENT, "Philips FM1216MP MK3"}, + /* 60-69 */ + { TUNER_PHILIPS_FM1216ME_MK3, "LG S001D MK3"}, + { TUNER_ABSENT, "LG M001D MK3"}, + { TUNER_PHILIPS_FM1216ME_MK3, "LG S701D MK3"}, + { TUNER_ABSENT, "LG M701D MK3"}, + { TUNER_ABSENT, "Temic 4146FM5"}, + { TUNER_ABSENT, "Temic 4136FY5"}, + { TUNER_ABSENT, "Temic 4106FH5"}, + { TUNER_ABSENT, "Philips FQ1216LMP MK3"}, + { TUNER_LG_NTSC_TAPE, "LG TAPE H001F MK3"}, + { TUNER_LG_NTSC_TAPE, "LG TAPE H701F MK3"}, + /* 70-79 */ + { TUNER_ABSENT, "LG TALN H200T"}, + { TUNER_ABSENT, "LG TALN H250T"}, + { TUNER_ABSENT, "LG TALN M200T"}, + { TUNER_ABSENT, "LG TALN Z200T"}, + { TUNER_ABSENT, "LG TALN S200T"}, + { TUNER_ABSENT, "Thompson DTT7595"}, + { TUNER_ABSENT, "Thompson DTT7592"}, + { TUNER_ABSENT, "Silicon TDA8275C1 8290"}, + { TUNER_ABSENT, "Silicon TDA8275C1 8290 FM"}, + { TUNER_ABSENT, "Thompson DTT757"}, + /* 80-89 */ + { TUNER_PHILIPS_FQ1216LME_MK3, "Philips FQ1216LME MK3"}, + { TUNER_LG_PAL_NEW_TAPC, "LG TAPC G701D"}, + { TUNER_LG_NTSC_NEW_TAPC, "LG TAPC H791F"}, + { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MB 3"}, + { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MI 3"}, + { TUNER_TCL_2002N, "TCL 2002N 6A"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FQ1236 MK3"}, + { TUNER_SAMSUNG_TCPN_2121P30A, "Samsung TCPN 2121P30A"}, + { TUNER_ABSENT, "Samsung TCPE 4121P30A"}, + { TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"}, + /* 90-99 */ + { TUNER_ABSENT, "LG TALN H202T"}, + { TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"}, + { TUNER_PHILIPS_FQ1236A_MK4, "Philips FQ1236A MK4"}, + { TUNER_ABSENT, "Philips FQ1286A MK4"}, + { TUNER_ABSENT, "Philips FQ1216ME MK5"}, + { TUNER_ABSENT, "Philips FQ1236 MK5"}, + { TUNER_SAMSUNG_TCPG_6121P30A, "Samsung TCPG 6121P30A"}, + { TUNER_TCL_2002MB, "TCL 2002MB_3H"}, + { TUNER_ABSENT, "TCL 2002MI_3H"}, + { TUNER_TCL_2002N, "TCL 2002N 5H"}, + /* 100-109 */ + { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216ME"}, + { TUNER_TEA5767, "Philips TEA5768HL FM Radio"}, + { TUNER_ABSENT, "Panasonic ENV57H12D5"}, + { TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05-4"}, + { TUNER_PHILIPS_FM1236_MK3, "TCL MNM05-4"}, + { TUNER_PHILIPS_FM1216ME_MK3, "TCL MPE05-2"}, + { TUNER_ABSENT, "TCL MQNM05-4"}, + { TUNER_ABSENT, "LG TAPC-W701D"}, + { TUNER_ABSENT, "TCL 9886P-WM"}, + { TUNER_ABSENT, "TCL 1676NM-WM"}, + /* 110-119 */ + { TUNER_ABSENT, "Thompson DTT75105"}, + { TUNER_ABSENT, "Conexant_CX24109"}, + { TUNER_TCL_2002N, "TCL M2523_5N_E"}, + { TUNER_TCL_2002MB, "TCL M2523_3DB_E"}, + { TUNER_ABSENT, "Philips 8275A"}, + { TUNER_ABSENT, "Microtune MT2060"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FM1236 MK5"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FM1216ME MK5"}, + { TUNER_ABSENT, "TCL M2523_3DI_E"}, + { TUNER_ABSENT, "Samsung THPD5222FG30A"}, + /* 120-129 */ + { TUNER_XC2028, "Xceive XC3028"}, + { TUNER_PHILIPS_FQ1216LME_MK3, "Philips FQ1216LME MK5"}, + { TUNER_ABSENT, "Philips FQD1216LME"}, + { TUNER_ABSENT, "Conexant CX24118A"}, + { TUNER_ABSENT, "TCL DMF11WIP"}, + { TUNER_ABSENT, "TCL MFNM05_4H_E"}, + { TUNER_ABSENT, "TCL MNM05_4H_E"}, + { TUNER_ABSENT, "TCL MPE05_2H_E"}, + { TUNER_ABSENT, "TCL MQNM05_4_U"}, + { TUNER_ABSENT, "TCL M2523_5NH_E"}, + /* 130-139 */ + { TUNER_ABSENT, "TCL M2523_3DBH_E"}, + { TUNER_ABSENT, "TCL M2523_3DIH_E"}, + { TUNER_ABSENT, "TCL MFPE05_2_U"}, + { TUNER_PHILIPS_FMD1216MEX_MK3, "Philips FMD1216MEX"}, + { TUNER_ABSENT, "Philips FRH2036B"}, + { TUNER_ABSENT, "Panasonic ENGF75_01GF"}, + { TUNER_ABSENT, "MaxLinear MXL5005"}, + { TUNER_ABSENT, "MaxLinear MXL5003"}, + { TUNER_ABSENT, "Xceive XC2028"}, + { TUNER_ABSENT, "Microtune MT2131"}, + /* 140-149 */ + { TUNER_ABSENT, "Philips 8275A_8295"}, + { TUNER_ABSENT, "TCL MF02GIP_5N_E"}, + { TUNER_ABSENT, "TCL MF02GIP_3DB_E"}, + { TUNER_ABSENT, "TCL MF02GIP_3DI_E"}, + { TUNER_ABSENT, "Microtune MT2266"}, + { TUNER_ABSENT, "TCL MF10WPP_4N_E"}, + { TUNER_ABSENT, "LG TAPQ_H702F"}, + { TUNER_ABSENT, "TCL M09WPP_4N_E"}, + { TUNER_ABSENT, "MaxLinear MXL5005_v2"}, + { TUNER_PHILIPS_TDA8290, "Philips 18271_8295"}, + /* 150-159 */ + { TUNER_XC5000, "Xceive XC5000"}, + { TUNER_ABSENT, "Xceive XC3028L"}, + { TUNER_ABSENT, "NXP 18271C2_716x"}, + { TUNER_ABSENT, "Xceive XC4000"}, + { TUNER_ABSENT, "Dibcom 7070"}, + { TUNER_PHILIPS_TDA8290, "NXP 18271C2"}, + { TUNER_ABSENT, "Siano SMS1010"}, + { TUNER_ABSENT, "Siano SMS1150"}, + { TUNER_ABSENT, "MaxLinear 5007"}, + { TUNER_ABSENT, "TCL M09WPP_2P_E"}, + /* 160-169 */ + { TUNER_ABSENT, "Siano SMS1180"}, + { TUNER_ABSENT, "Maxim_MAX2165"}, + { TUNER_ABSENT, "Siano SMS1140"}, + { TUNER_ABSENT, "Siano SMS1150 B1"}, + { TUNER_ABSENT, "MaxLinear 111"}, + { TUNER_ABSENT, "Dibcom 7770"}, + { TUNER_ABSENT, "Siano SMS1180VNS"}, + { TUNER_ABSENT, "Siano SMS1184"}, + { TUNER_PHILIPS_FQ1236_MK5, "TCL M30WTP-4N-E"}, + { TUNER_ABSENT, "TCL_M11WPP_2PN_E"}, + /* 170-179 */ + { TUNER_ABSENT, "MaxLinear 301"}, + { TUNER_ABSENT, "Mirics MSi001"}, + { TUNER_ABSENT, "MaxLinear MxL241SF"}, + { TUNER_XC5000C, "Xceive XC5000C"}, + { TUNER_ABSENT, "Montage M68TS2020"}, + { TUNER_ABSENT, "Siano SMS1530"}, + { TUNER_ABSENT, "Dibcom 7090"}, + { TUNER_ABSENT, "Xceive XC5200C"}, + { TUNER_ABSENT, "NXP 18273"}, + { TUNER_ABSENT, "Montage M88TS2022"}, + /* 180-189 */ + { TUNER_ABSENT, "NXP 18272M"}, + { TUNER_ABSENT, "NXP 18272S"}, +}; + +/* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are + * internal to a video chip, i.e. not a separate audio chip. */ +static struct HAUPPAUGE_AUDIOIC +{ + u32 id; + char *name; +} +audioIC[] = +{ + /* 0-4 */ + { V4L2_IDENT_NONE, "None" }, + { V4L2_IDENT_UNKNOWN, "TEA6300" }, + { V4L2_IDENT_UNKNOWN, "TEA6320" }, + { V4L2_IDENT_UNKNOWN, "TDA9850" }, + { V4L2_IDENT_MSPX4XX, "MSP3400C" }, + /* 5-9 */ + { V4L2_IDENT_MSPX4XX, "MSP3410D" }, + { V4L2_IDENT_MSPX4XX, "MSP3415" }, + { V4L2_IDENT_MSPX4XX, "MSP3430" }, + { V4L2_IDENT_MSPX4XX, "MSP3438" }, + { V4L2_IDENT_UNKNOWN, "CS5331" }, + /* 10-14 */ + { V4L2_IDENT_MSPX4XX, "MSP3435" }, + { V4L2_IDENT_MSPX4XX, "MSP3440" }, + { V4L2_IDENT_MSPX4XX, "MSP3445" }, + { V4L2_IDENT_MSPX4XX, "MSP3411" }, + { V4L2_IDENT_MSPX4XX, "MSP3416" }, + /* 15-19 */ + { V4L2_IDENT_MSPX4XX, "MSP3425" }, + { V4L2_IDENT_MSPX4XX, "MSP3451" }, + { V4L2_IDENT_MSPX4XX, "MSP3418" }, + { V4L2_IDENT_UNKNOWN, "Type 0x12" }, + { V4L2_IDENT_UNKNOWN, "OKI7716" }, + /* 20-24 */ + { V4L2_IDENT_MSPX4XX, "MSP4410" }, + { V4L2_IDENT_MSPX4XX, "MSP4420" }, + { V4L2_IDENT_MSPX4XX, "MSP4440" }, + { V4L2_IDENT_MSPX4XX, "MSP4450" }, + { V4L2_IDENT_MSPX4XX, "MSP4408" }, + /* 25-29 */ + { V4L2_IDENT_MSPX4XX, "MSP4418" }, + { V4L2_IDENT_MSPX4XX, "MSP4428" }, + { V4L2_IDENT_MSPX4XX, "MSP4448" }, + { V4L2_IDENT_MSPX4XX, "MSP4458" }, + { V4L2_IDENT_MSPX4XX, "Type 0x1d" }, + /* 30-34 */ + { V4L2_IDENT_AMBIGUOUS, "CX880" }, + { V4L2_IDENT_AMBIGUOUS, "CX881" }, + { V4L2_IDENT_AMBIGUOUS, "CX883" }, + { V4L2_IDENT_AMBIGUOUS, "CX882" }, + { V4L2_IDENT_AMBIGUOUS, "CX25840" }, + /* 35-39 */ + { V4L2_IDENT_AMBIGUOUS, "CX25841" }, + { V4L2_IDENT_AMBIGUOUS, "CX25842" }, + { V4L2_IDENT_AMBIGUOUS, "CX25843" }, + { V4L2_IDENT_AMBIGUOUS, "CX23418" }, + { V4L2_IDENT_AMBIGUOUS, "CX23885" }, + /* 40-44 */ + { V4L2_IDENT_AMBIGUOUS, "CX23888" }, + { V4L2_IDENT_AMBIGUOUS, "SAA7131" }, + { V4L2_IDENT_AMBIGUOUS, "CX23887" }, + { V4L2_IDENT_AMBIGUOUS, "SAA7164" }, + { V4L2_IDENT_AMBIGUOUS, "AU8522" }, +}; + +/* This list is supplied by Hauppauge. Thanks! */ +static const char *decoderIC[] = { + /* 0-4 */ + "None", "BT815", "BT817", "BT819", "BT815A", + /* 5-9 */ + "BT817A", "BT819A", "BT827", "BT829", "BT848", + /* 10-14 */ + "BT848A", "BT849A", "BT829A", "BT827A", "BT878", + /* 15-19 */ + "BT879", "BT880", "VPX3226E", "SAA7114", "SAA7115", + /* 20-24 */ + "CX880", "CX881", "CX883", "SAA7111", "SAA7113", + /* 25-29 */ + "CX882", "TVP5150A", "CX25840", "CX25841", "CX25842", + /* 30-34 */ + "CX25843", "CX23418", "NEC61153", "CX23885", "CX23888", + /* 35-39 */ + "SAA7131", "CX25837", "CX23887", "CX23885A", "CX23887A", + /* 40-42 */ + "SAA7164", "CX23885B", "AU8522" +}; + +static int hasRadioTuner(int tunerType) +{ + switch (tunerType) { + case 18: /* PNPEnv_TUNER_FR1236_MK2 */ + case 23: /* PNPEnv_TUNER_FM1236 */ + case 38: /* PNPEnv_TUNER_FMR1236 */ + case 16: /* PNPEnv_TUNER_FR1216_MK2 */ + case 19: /* PNPEnv_TUNER_FR1246_MK2 */ + case 21: /* PNPEnv_TUNER_FM1216 */ + case 24: /* PNPEnv_TUNER_FM1246 */ + case 17: /* PNPEnv_TUNER_FR1216MF_MK2 */ + case 22: /* PNPEnv_TUNER_FM1216MF */ + case 20: /* PNPEnv_TUNER_FR1256_MK2 */ + case 25: /* PNPEnv_TUNER_FM1256 */ + case 33: /* PNPEnv_TUNER_4039FR5 */ + case 42: /* PNPEnv_TUNER_4009FR5 */ + case 52: /* PNPEnv_TUNER_4049FM5 */ + case 54: /* PNPEnv_TUNER_4049FM5_AltI2C */ + case 44: /* PNPEnv_TUNER_4009FN5 */ + case 31: /* PNPEnv_TUNER_TCPB9085P */ + case 30: /* PNPEnv_TUNER_TCPN9085D */ + case 46: /* PNPEnv_TUNER_TP18NSR01F */ + case 47: /* PNPEnv_TUNER_TP18PSB01D */ + case 49: /* PNPEnv_TUNER_TAPC_I001D */ + case 60: /* PNPEnv_TUNER_TAPE_S001D_MK3 */ + case 57: /* PNPEnv_TUNER_FM1216ME_MK3 */ + case 59: /* PNPEnv_TUNER_FM1216MP_MK3 */ + case 58: /* PNPEnv_TUNER_FM1236_MK3 */ + case 68: /* PNPEnv_TUNER_TAPE_H001F_MK3 */ + case 61: /* PNPEnv_TUNER_TAPE_M001D_MK3 */ + case 78: /* PNPEnv_TUNER_TDA8275C1_8290_FM */ + case 89: /* PNPEnv_TUNER_TCL_MFPE05_2 */ + case 92: /* PNPEnv_TUNER_PHILIPS_FQ1236A_MK4 */ + case 105: + return 1; + } + return 0; +} + +void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, + unsigned char *eeprom_data) +{ + /* ---------------------------------------------- + ** The hauppauge eeprom format is tagged + ** + ** if packet[0] == 0x84, then packet[0..1] == length + ** else length = packet[0] & 3f; + ** if packet[0] & f8 == f8, then EOD and packet[1] == checksum + ** + ** In our (ivtv) case we're interested in the following: + ** tuner type: tag [00].05 or [0a].01 (index into hauppauge_tuner) + ** tuner fmts: tag [00].04 or [0a].00 (bitmask index into + ** hauppauge_tuner_fmt) + ** radio: tag [00].{last} or [0e].00 (bitmask. bit2=FM) + ** audio proc: tag [02].01 or [05].00 (mask with 0x7f) + ** decoder proc: tag [09].01) + + ** Fun info: + ** model: tag [00].07-08 or [06].00-01 + ** revision: tag [00].09-0b or [06].04-06 + ** serial#: tag [01].05-07 or [04].04-06 + + ** # of inputs/outputs ??? + */ + + int i, j, len, done, beenhere, tag, start; + + int tuner1 = 0, t_format1 = 0, audioic = -1; + char *t_name1 = NULL; + const char *t_fmt_name1[8] = { " none", "", "", "", "", "", "", "" }; + + int tuner2 = 0, t_format2 = 0; + char *t_name2 = NULL; + const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" }; + + memset(tvee, 0, sizeof(*tvee)); + tvee->tuner_type = TUNER_ABSENT; + tvee->tuner2_type = TUNER_ABSENT; + + done = len = beenhere = 0; + + /* Different eeprom start offsets for em28xx, cx2388x and cx23418 */ + if (eeprom_data[0] == 0x1a && + eeprom_data[1] == 0xeb && + eeprom_data[2] == 0x67 && + eeprom_data[3] == 0x95) + start = 0xa0; /* Generic em28xx offset */ + else if ((eeprom_data[0] & 0xe1) == 0x01 && + eeprom_data[1] == 0x00 && + eeprom_data[2] == 0x00 && + eeprom_data[8] == 0x84) + start = 8; /* Generic cx2388x offset */ + else if (eeprom_data[1] == 0x70 && + eeprom_data[2] == 0x00 && + eeprom_data[4] == 0x74 && + eeprom_data[8] == 0x84) + start = 8; /* Generic cx23418 offset (models 74xxx) */ + else + start = 0; + + for (i = start; !done && i < 256; i += len) { + if (eeprom_data[i] == 0x84) { + len = eeprom_data[i + 1] + (eeprom_data[i + 2] << 8); + i += 3; + } else if ((eeprom_data[i] & 0xf0) == 0x70) { + if (eeprom_data[i] & 0x08) { + /* verify checksum! */ + done = 1; + break; + } + len = eeprom_data[i] & 0x07; + ++i; + } else { + tveeprom_warn("Encountered bad packet header [%02x]. " + "Corrupt or not a Hauppauge eeprom.\n", + eeprom_data[i]); + return; + } + + if (debug) { + tveeprom_info("Tag [%02x] + %d bytes:", + eeprom_data[i], len - 1); + for (j = 1; j < len; j++) + printk(KERN_CONT " %02x", eeprom_data[i + j]); + printk(KERN_CONT "\n"); + } + + /* process by tag */ + tag = eeprom_data[i]; + switch (tag) { + case 0x00: + /* tag: 'Comprehensive' */ + tuner1 = eeprom_data[i+6]; + t_format1 = eeprom_data[i+5]; + tvee->has_radio = eeprom_data[i+len-1]; + /* old style tag, don't know how to detect + IR presence, mark as unknown. */ + tvee->has_ir = 0; + tvee->model = + eeprom_data[i+8] + + (eeprom_data[i+9] << 8); + tvee->revision = eeprom_data[i+10] + + (eeprom_data[i+11] << 8) + + (eeprom_data[i+12] << 16); + break; + + case 0x01: + /* tag: 'SerialID' */ + tvee->serial_number = + eeprom_data[i+6] + + (eeprom_data[i+7] << 8) + + (eeprom_data[i+8] << 16); + break; + + case 0x02: + /* tag 'AudioInfo' + Note mask with 0x7F, high bit used on some older models + to indicate 4052 mux was removed in favor of using MSP + inputs directly. */ + audioic = eeprom_data[i+2] & 0x7f; + if (audioic < ARRAY_SIZE(audioIC)) + tvee->audio_processor = audioIC[audioic].id; + else + tvee->audio_processor = V4L2_IDENT_UNKNOWN; + break; + + /* case 0x03: tag 'EEInfo' */ + + case 0x04: + /* tag 'SerialID2' */ + tvee->serial_number = + eeprom_data[i+5] + + (eeprom_data[i+6] << 8) + + (eeprom_data[i+7] << 16); + + if ((eeprom_data[i + 8] & 0xf0) && + (tvee->serial_number < 0xffffff)) { + tvee->MAC_address[0] = 0x00; + tvee->MAC_address[1] = 0x0D; + tvee->MAC_address[2] = 0xFE; + tvee->MAC_address[3] = eeprom_data[i + 7]; + tvee->MAC_address[4] = eeprom_data[i + 6]; + tvee->MAC_address[5] = eeprom_data[i + 5]; + tvee->has_MAC_address = 1; + } + break; + + case 0x05: + /* tag 'Audio2' + Note mask with 0x7F, high bit used on some older models + to indicate 4052 mux was removed in favor of using MSP + inputs directly. */ + audioic = eeprom_data[i+1] & 0x7f; + if (audioic < ARRAY_SIZE(audioIC)) + tvee->audio_processor = audioIC[audioic].id; + else + tvee->audio_processor = V4L2_IDENT_UNKNOWN; + + break; + + case 0x06: + /* tag 'ModelRev' */ + tvee->model = + eeprom_data[i + 1] + + (eeprom_data[i + 2] << 8) + + (eeprom_data[i + 3] << 16) + + (eeprom_data[i + 4] << 24); + tvee->revision = + eeprom_data[i + 5] + + (eeprom_data[i + 6] << 8) + + (eeprom_data[i + 7] << 16); + break; + + case 0x07: + /* tag 'Details': according to Hauppauge not interesting + on any PCI-era or later boards. */ + break; + + /* there is no tag 0x08 defined */ + + case 0x09: + /* tag 'Video' */ + tvee->decoder_processor = eeprom_data[i + 1]; + break; + + case 0x0a: + /* tag 'Tuner' */ + if (beenhere == 0) { + tuner1 = eeprom_data[i + 2]; + t_format1 = eeprom_data[i + 1]; + beenhere = 1; + } else { + /* a second (radio) tuner may be present */ + tuner2 = eeprom_data[i + 2]; + t_format2 = eeprom_data[i + 1]; + /* not a TV tuner? */ + if (t_format2 == 0) + tvee->has_radio = 1; /* must be radio */ + } + break; + + case 0x0b: + /* tag 'Inputs': according to Hauppauge this is specific + to each driver family, so no good assumptions can be + made. */ + break; + + /* case 0x0c: tag 'Balun' */ + /* case 0x0d: tag 'Teletext' */ + + case 0x0e: + /* tag: 'Radio' */ + tvee->has_radio = eeprom_data[i+1]; + break; + + case 0x0f: + /* tag 'IRInfo' */ + tvee->has_ir = 1 | (eeprom_data[i+1] << 1); + break; + + /* case 0x10: tag 'VBIInfo' */ + /* case 0x11: tag 'QCInfo' */ + /* case 0x12: tag 'InfoBits' */ + + default: + tveeprom_dbg("Not sure what to do with tag [%02x]\n", + tag); + /* dump the rest of the packet? */ + } + } + + if (!done) { + tveeprom_warn("Ran out of data!\n"); + return; + } + + if (tvee->revision != 0) { + tvee->rev_str[0] = 32 + ((tvee->revision >> 18) & 0x3f); + tvee->rev_str[1] = 32 + ((tvee->revision >> 12) & 0x3f); + tvee->rev_str[2] = 32 + ((tvee->revision >> 6) & 0x3f); + tvee->rev_str[3] = 32 + (tvee->revision & 0x3f); + tvee->rev_str[4] = 0; + } + + if (hasRadioTuner(tuner1) && !tvee->has_radio) { + tveeprom_info("The eeprom says no radio is present, but the tuner type\n"); + tveeprom_info("indicates otherwise. I will assume that radio is present.\n"); + tvee->has_radio = 1; + } + + if (tuner1 < ARRAY_SIZE(hauppauge_tuner)) { + tvee->tuner_type = hauppauge_tuner[tuner1].id; + t_name1 = hauppauge_tuner[tuner1].name; + } else { + t_name1 = "unknown"; + } + + if (tuner2 < ARRAY_SIZE(hauppauge_tuner)) { + tvee->tuner2_type = hauppauge_tuner[tuner2].id; + t_name2 = hauppauge_tuner[tuner2].name; + } else { + t_name2 = "unknown"; + } + + tvee->tuner_hauppauge_model = tuner1; + tvee->tuner2_hauppauge_model = tuner2; + tvee->tuner_formats = 0; + tvee->tuner2_formats = 0; + for (i = j = 0; i < 8; i++) { + if (t_format1 & (1 << i)) { + tvee->tuner_formats |= hauppauge_tuner_fmt[i].id; + t_fmt_name1[j++] = hauppauge_tuner_fmt[i].name; + } + } + for (i = j = 0; i < 8; i++) { + if (t_format2 & (1 << i)) { + tvee->tuner2_formats |= hauppauge_tuner_fmt[i].id; + t_fmt_name2[j++] = hauppauge_tuner_fmt[i].name; + } + } + + tveeprom_info("Hauppauge model %d, rev %s, serial# %d\n", + tvee->model, tvee->rev_str, tvee->serial_number); + if (tvee->has_MAC_address == 1) + tveeprom_info("MAC address is %pM\n", tvee->MAC_address); + tveeprom_info("tuner model is %s (idx %d, type %d)\n", + t_name1, tuner1, tvee->tuner_type); + tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", + t_fmt_name1[0], t_fmt_name1[1], t_fmt_name1[2], + t_fmt_name1[3], t_fmt_name1[4], t_fmt_name1[5], + t_fmt_name1[6], t_fmt_name1[7], t_format1); + if (tuner2) + tveeprom_info("second tuner model is %s (idx %d, type %d)\n", + t_name2, tuner2, tvee->tuner2_type); + if (t_format2) + tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", + t_fmt_name2[0], t_fmt_name2[1], t_fmt_name2[2], + t_fmt_name2[3], t_fmt_name2[4], t_fmt_name2[5], + t_fmt_name2[6], t_fmt_name2[7], t_format2); + if (audioic < 0) { + tveeprom_info("audio processor is unknown (no idx)\n"); + tvee->audio_processor = V4L2_IDENT_UNKNOWN; + } else { + if (audioic < ARRAY_SIZE(audioIC)) + tveeprom_info("audio processor is %s (idx %d)\n", + audioIC[audioic].name, audioic); + else + tveeprom_info("audio processor is unknown (idx %d)\n", + audioic); + } + if (tvee->decoder_processor) + tveeprom_info("decoder processor is %s (idx %d)\n", + STRM(decoderIC, tvee->decoder_processor), + tvee->decoder_processor); + if (tvee->has_ir) + tveeprom_info("has %sradio, has %sIR receiver, has %sIR transmitter\n", + tvee->has_radio ? "" : "no ", + (tvee->has_ir & 2) ? "" : "no ", + (tvee->has_ir & 4) ? "" : "no "); + else + tveeprom_info("has %sradio\n", + tvee->has_radio ? "" : "no "); +} +EXPORT_SYMBOL(tveeprom_hauppauge_analog); + +/* ----------------------------------------------------------------------- */ +/* generic helper functions */ + +int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len) +{ + unsigned char buf; + int err; + + buf = 0; + err = i2c_master_send(c, &buf, 1); + if (err != 1) { + tveeprom_info("Huh, no eeprom present (err=%d)?\n", err); + return -1; + } + err = i2c_master_recv(c, eedata, len); + if (err != len) { + tveeprom_warn("i2c eeprom read error (err=%d)\n", err); + return -1; + } + if (debug) { + int i; + + tveeprom_info("full 256-byte eeprom dump:\n"); + for (i = 0; i < len; i++) { + if (0 == (i % 16)) + tveeprom_info("%02x:", i); + printk(KERN_CONT " %02x", eedata[i]); + if (15 == (i % 16)) + printk(KERN_CONT "\n"); + } + } + return 0; +} +EXPORT_SYMBOL(tveeprom_read); diff --git a/drivers/media/dvb-core/Kconfig b/drivers/media/dvb-core/Kconfig new file mode 100644 index 00000000..fa7a2490 --- /dev/null +++ b/drivers/media/dvb-core/Kconfig @@ -0,0 +1,29 @@ +# +# DVB device configuration +# + +config DVB_MAX_ADAPTERS + int "maximum number of DVB/ATSC adapters" + depends on DVB_CORE + default 8 + range 1 255 + help + Maximum number of DVB/ATSC adapters. Increasing this number + increases the memory consumption of the DVB subsystem even + if a much lower number of DVB/ATSC adapters is present. + Only values in the range 4-32 are tested. + + If you are unsure about this, use the default value 8 + +config DVB_DYNAMIC_MINORS + bool "Dynamic DVB minor allocation" + depends on DVB_CORE + default n + help + If you say Y here, the DVB subsystem will use dynamic minor + allocation for any device that uses the DVB major number. + This means that you can have more than 4 of a single type + of device (like demuxes and frontends) per adapter, but udev + will be required to manage the device nodes. + + If you are unsure about this, say N here. diff --git a/drivers/media/dvb-core/Makefile b/drivers/media/dvb-core/Makefile new file mode 100644 index 00000000..8f22bcd7 --- /dev/null +++ b/drivers/media/dvb-core/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the kernel DVB device drivers. +# + +dvb-net-$(CONFIG_DVB_NET) := dvb_net.o + +dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ + dvb_ca_en50221.o dvb_frontend.o \ + $(dvb-net-y) dvb_ringbuffer.o dvb_math.o + +obj-$(CONFIG_DVB_CORE) += dvb-core.o diff --git a/drivers/media/dvb-core/demux.h b/drivers/media/dvb-core/demux.h new file mode 100644 index 00000000..833191bc --- /dev/null +++ b/drivers/media/dvb-core/demux.h @@ -0,0 +1,241 @@ +/* + * demux.h + * + * Copyright (c) 2002 Convergence GmbH + * + * based on code: + * Copyright (c) 2000 Nokia Research Center + * Tampere, FINLAND + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef __DEMUX_H +#define __DEMUX_H + +#include +#include +#include +#include +#include + +/*--------------------------------------------------------------------------*/ +/* Common definitions */ +/*--------------------------------------------------------------------------*/ + +/* + * DMX_MAX_FILTER_SIZE: Maximum length (in bytes) of a section/PES filter. + */ + +#ifndef DMX_MAX_FILTER_SIZE +#define DMX_MAX_FILTER_SIZE 18 +#endif + +/* + * DMX_MAX_SECFEED_SIZE: Maximum length (in bytes) of a private section feed filter. + */ + +#ifndef DMX_MAX_SECTION_SIZE +#define DMX_MAX_SECTION_SIZE 4096 +#endif +#ifndef DMX_MAX_SECFEED_SIZE +#define DMX_MAX_SECFEED_SIZE (DMX_MAX_SECTION_SIZE + 188) +#endif + + +/* + * enum dmx_success: Success codes for the Demux Callback API. + */ + +enum dmx_success { + DMX_OK = 0, /* Received Ok */ + DMX_LENGTH_ERROR, /* Incorrect length */ + DMX_OVERRUN_ERROR, /* Receiver ring buffer overrun */ + DMX_CRC_ERROR, /* Incorrect CRC */ + DMX_FRAME_ERROR, /* Frame alignment error */ + DMX_FIFO_ERROR, /* Receiver FIFO overrun */ + DMX_MISSED_ERROR /* Receiver missed packet */ +} ; + +/*--------------------------------------------------------------------------*/ +/* TS packet reception */ +/*--------------------------------------------------------------------------*/ + +/* TS filter type for set() */ + +#define TS_PACKET 1 /* send TS packets (188 bytes) to callback (default) */ +#define TS_PAYLOAD_ONLY 2 /* in case TS_PACKET is set, only send the TS + payload (<=184 bytes per packet) to callback */ +#define TS_DECODER 4 /* send stream to built-in decoder (if present) */ +#define TS_DEMUX 8 /* in case TS_PACKET is set, send the TS to + the demux device, not to the dvr device */ + +struct dmx_ts_feed { + int is_filtering; /* Set to non-zero when filtering in progress */ + struct dmx_demux *parent; /* Back-pointer */ + void *priv; /* Pointer to private data of the API client */ + int (*set) (struct dmx_ts_feed *feed, + u16 pid, + int type, + enum dmx_ts_pes pes_type, + size_t circular_buffer_size, + struct timespec timeout); + int (*start_filtering) (struct dmx_ts_feed* feed); + int (*stop_filtering) (struct dmx_ts_feed* feed); +}; + +/*--------------------------------------------------------------------------*/ +/* Section reception */ +/*--------------------------------------------------------------------------*/ + +struct dmx_section_filter { + u8 filter_value [DMX_MAX_FILTER_SIZE]; + u8 filter_mask [DMX_MAX_FILTER_SIZE]; + u8 filter_mode [DMX_MAX_FILTER_SIZE]; + struct dmx_section_feed* parent; /* Back-pointer */ + void* priv; /* Pointer to private data of the API client */ +}; + +struct dmx_section_feed { + int is_filtering; /* Set to non-zero when filtering in progress */ + struct dmx_demux* parent; /* Back-pointer */ + void* priv; /* Pointer to private data of the API client */ + + int check_crc; + u32 crc_val; + + u8 *secbuf; + u8 secbuf_base[DMX_MAX_SECFEED_SIZE]; + u16 secbufp, seclen, tsfeedp; + + int (*set) (struct dmx_section_feed* feed, + u16 pid, + size_t circular_buffer_size, + int check_crc); + int (*allocate_filter) (struct dmx_section_feed* feed, + struct dmx_section_filter** filter); + int (*release_filter) (struct dmx_section_feed* feed, + struct dmx_section_filter* filter); + int (*start_filtering) (struct dmx_section_feed* feed); + int (*stop_filtering) (struct dmx_section_feed* feed); +}; + +/*--------------------------------------------------------------------------*/ +/* Callback functions */ +/*--------------------------------------------------------------------------*/ + +typedef int (*dmx_ts_cb) ( const u8 * buffer1, + size_t buffer1_length, + const u8 * buffer2, + size_t buffer2_length, + struct dmx_ts_feed* source, + enum dmx_success success); + +typedef int (*dmx_section_cb) ( const u8 * buffer1, + size_t buffer1_len, + const u8 * buffer2, + size_t buffer2_len, + struct dmx_section_filter * source, + enum dmx_success success); + +/*--------------------------------------------------------------------------*/ +/* DVB Front-End */ +/*--------------------------------------------------------------------------*/ + +enum dmx_frontend_source { + DMX_MEMORY_FE, + DMX_FRONTEND_0, + DMX_FRONTEND_1, + DMX_FRONTEND_2, + DMX_FRONTEND_3, + DMX_STREAM_0, /* external stream input, e.g. LVDS */ + DMX_STREAM_1, + DMX_STREAM_2, + DMX_STREAM_3 +}; + +struct dmx_frontend { + struct list_head connectivity_list; /* List of front-ends that can + be connected to a particular + demux */ + enum dmx_frontend_source source; +}; + +/*--------------------------------------------------------------------------*/ +/* MPEG-2 TS Demux */ +/*--------------------------------------------------------------------------*/ + +/* + * Flags OR'ed in the capabilities field of struct dmx_demux. + */ + +#define DMX_TS_FILTERING 1 +#define DMX_PES_FILTERING 2 +#define DMX_SECTION_FILTERING 4 +#define DMX_MEMORY_BASED_FILTERING 8 /* write() available */ +#define DMX_CRC_CHECKING 16 +#define DMX_TS_DESCRAMBLING 32 + +/* + * Demux resource type identifier. +*/ + +/* + * DMX_FE_ENTRY(): Casts elements in the list of registered + * front-ends from the generic type struct list_head + * to the type * struct dmx_frontend + *. +*/ + +#define DMX_FE_ENTRY(list) list_entry(list, struct dmx_frontend, connectivity_list) + +struct dmx_demux { + u32 capabilities; /* Bitfield of capability flags */ + struct dmx_frontend* frontend; /* Front-end connected to the demux */ + void* priv; /* Pointer to private data of the API client */ + int (*open) (struct dmx_demux* demux); + int (*close) (struct dmx_demux* demux); + int (*write) (struct dmx_demux* demux, const char __user *buf, size_t count); + int (*allocate_ts_feed) (struct dmx_demux* demux, + struct dmx_ts_feed** feed, + dmx_ts_cb callback); + int (*release_ts_feed) (struct dmx_demux* demux, + struct dmx_ts_feed* feed); + int (*allocate_section_feed) (struct dmx_demux* demux, + struct dmx_section_feed** feed, + dmx_section_cb callback); + int (*release_section_feed) (struct dmx_demux* demux, + struct dmx_section_feed* feed); + int (*add_frontend) (struct dmx_demux* demux, + struct dmx_frontend* frontend); + int (*remove_frontend) (struct dmx_demux* demux, + struct dmx_frontend* frontend); + struct list_head* (*get_frontends) (struct dmx_demux* demux); + int (*connect_frontend) (struct dmx_demux* demux, + struct dmx_frontend* frontend); + int (*disconnect_frontend) (struct dmx_demux* demux); + + int (*get_pes_pids) (struct dmx_demux* demux, u16 *pids); + + int (*get_caps) (struct dmx_demux* demux, struct dmx_caps *caps); + + int (*set_source) (struct dmx_demux* demux, const dmx_source_t *src); + + int (*get_stc) (struct dmx_demux* demux, unsigned int num, + u64 *stc, unsigned int *base); +}; + +#endif /* #ifndef __DEMUX_H */ diff --git a/drivers/media/dvb-core/dmxdev.c b/drivers/media/dvb-core/dmxdev.c new file mode 100644 index 00000000..0b4616b8 --- /dev/null +++ b/drivers/media/dvb-core/dmxdev.c @@ -0,0 +1,1272 @@ +/* + * dmxdev.c - DVB demultiplexer device + * + * Copyright (C) 2000 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "dmxdev.h" + +static int debug; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define dprintk if (debug) printk + +static int dvb_dmxdev_buffer_write(struct dvb_ringbuffer *buf, + const u8 *src, size_t len) +{ + ssize_t free; + + if (!len) + return 0; + if (!buf->data) + return 0; + + free = dvb_ringbuffer_free(buf); + if (len > free) { + dprintk("dmxdev: buffer overflow\n"); + return -EOVERFLOW; + } + + return dvb_ringbuffer_write(buf, src, len); +} + +static ssize_t dvb_dmxdev_buffer_read(struct dvb_ringbuffer *src, + int non_blocking, char __user *buf, + size_t count, loff_t *ppos) +{ + size_t todo; + ssize_t avail; + ssize_t ret = 0; + + if (!src->data) + return 0; + + if (src->error) { + ret = src->error; + dvb_ringbuffer_flush(src); + return ret; + } + + for (todo = count; todo > 0; todo -= ret) { + if (non_blocking && dvb_ringbuffer_empty(src)) { + ret = -EWOULDBLOCK; + break; + } + + ret = wait_event_interruptible(src->queue, + !dvb_ringbuffer_empty(src) || + (src->error != 0)); + if (ret < 0) + break; + + if (src->error) { + ret = src->error; + dvb_ringbuffer_flush(src); + break; + } + + avail = dvb_ringbuffer_avail(src); + if (avail > todo) + avail = todo; + + ret = dvb_ringbuffer_read_user(src, buf, avail); + if (ret < 0) + break; + + buf += ret; + } + + return (count - todo) ? (count - todo) : ret; +} + +static struct dmx_frontend *get_fe(struct dmx_demux *demux, int type) +{ + struct list_head *head, *pos; + + head = demux->get_frontends(demux); + if (!head) + return NULL; + list_for_each(pos, head) + if (DMX_FE_ENTRY(pos)->source == type) + return DMX_FE_ENTRY(pos); + + return NULL; +} + +static int dvb_dvr_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; + struct dmx_frontend *front; + + dprintk("function : %s\n", __func__); + + if (mutex_lock_interruptible(&dmxdev->mutex)) + return -ERESTARTSYS; + + if (dmxdev->exit) { + mutex_unlock(&dmxdev->mutex); + return -ENODEV; + } + + if ((file->f_flags & O_ACCMODE) == O_RDWR) { + if (!(dmxdev->capabilities & DMXDEV_CAP_DUPLEX)) { + mutex_unlock(&dmxdev->mutex); + return -EOPNOTSUPP; + } + } + + if ((file->f_flags & O_ACCMODE) == O_RDONLY) { + void *mem; + if (!dvbdev->readers) { + mutex_unlock(&dmxdev->mutex); + return -EBUSY; + } + mem = vmalloc(DVR_BUFFER_SIZE); + if (!mem) { + mutex_unlock(&dmxdev->mutex); + return -ENOMEM; + } + dvb_ringbuffer_init(&dmxdev->dvr_buffer, mem, DVR_BUFFER_SIZE); + dvbdev->readers--; + } + + if ((file->f_flags & O_ACCMODE) == O_WRONLY) { + dmxdev->dvr_orig_fe = dmxdev->demux->frontend; + + if (!dmxdev->demux->write) { + mutex_unlock(&dmxdev->mutex); + return -EOPNOTSUPP; + } + + front = get_fe(dmxdev->demux, DMX_MEMORY_FE); + + if (!front) { + mutex_unlock(&dmxdev->mutex); + return -EINVAL; + } + dmxdev->demux->disconnect_frontend(dmxdev->demux); + dmxdev->demux->connect_frontend(dmxdev->demux, front); + } + dvbdev->users++; + mutex_unlock(&dmxdev->mutex); + return 0; +} + +static int dvb_dvr_release(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; + + mutex_lock(&dmxdev->mutex); + + if ((file->f_flags & O_ACCMODE) == O_WRONLY) { + dmxdev->demux->disconnect_frontend(dmxdev->demux); + dmxdev->demux->connect_frontend(dmxdev->demux, + dmxdev->dvr_orig_fe); + } + if ((file->f_flags & O_ACCMODE) == O_RDONLY) { + dvbdev->readers++; + if (dmxdev->dvr_buffer.data) { + void *mem = dmxdev->dvr_buffer.data; + mb(); + spin_lock_irq(&dmxdev->lock); + dmxdev->dvr_buffer.data = NULL; + spin_unlock_irq(&dmxdev->lock); + vfree(mem); + } + } + /* TODO */ + dvbdev->users--; + if (dvbdev->users == 1 && dmxdev->exit == 1) { + fops_put(file->f_op); + file->f_op = NULL; + mutex_unlock(&dmxdev->mutex); + wake_up(&dvbdev->wait_queue); + } else + mutex_unlock(&dmxdev->mutex); + + return 0; +} + +static ssize_t dvb_dvr_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; + int ret; + + if (!dmxdev->demux->write) + return -EOPNOTSUPP; + if ((file->f_flags & O_ACCMODE) != O_WRONLY) + return -EINVAL; + if (mutex_lock_interruptible(&dmxdev->mutex)) + return -ERESTARTSYS; + + if (dmxdev->exit) { + mutex_unlock(&dmxdev->mutex); + return -ENODEV; + } + ret = dmxdev->demux->write(dmxdev->demux, buf, count); + mutex_unlock(&dmxdev->mutex); + return ret; +} + +static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count, + loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; + + if (dmxdev->exit) + return -ENODEV; + + return dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer, + file->f_flags & O_NONBLOCK, + buf, count, ppos); +} + +static int dvb_dvr_set_buffer_size(struct dmxdev *dmxdev, + unsigned long size) +{ + struct dvb_ringbuffer *buf = &dmxdev->dvr_buffer; + void *newmem; + void *oldmem; + + dprintk("function : %s\n", __func__); + + if (buf->size == size) + return 0; + if (!size) + return -EINVAL; + + newmem = vmalloc(size); + if (!newmem) + return -ENOMEM; + + oldmem = buf->data; + + spin_lock_irq(&dmxdev->lock); + buf->data = newmem; + buf->size = size; + + /* reset and not flush in case the buffer shrinks */ + dvb_ringbuffer_reset(buf); + spin_unlock_irq(&dmxdev->lock); + + vfree(oldmem); + + return 0; +} + +static inline void dvb_dmxdev_filter_state_set(struct dmxdev_filter + *dmxdevfilter, int state) +{ + spin_lock_irq(&dmxdevfilter->dev->lock); + dmxdevfilter->state = state; + spin_unlock_irq(&dmxdevfilter->dev->lock); +} + +static int dvb_dmxdev_set_buffer_size(struct dmxdev_filter *dmxdevfilter, + unsigned long size) +{ + struct dvb_ringbuffer *buf = &dmxdevfilter->buffer; + void *newmem; + void *oldmem; + + if (buf->size == size) + return 0; + if (!size) + return -EINVAL; + if (dmxdevfilter->state >= DMXDEV_STATE_GO) + return -EBUSY; + + newmem = vmalloc(size); + if (!newmem) + return -ENOMEM; + + oldmem = buf->data; + + spin_lock_irq(&dmxdevfilter->dev->lock); + buf->data = newmem; + buf->size = size; + + /* reset and not flush in case the buffer shrinks */ + dvb_ringbuffer_reset(buf); + spin_unlock_irq(&dmxdevfilter->dev->lock); + + vfree(oldmem); + + return 0; +} + +static void dvb_dmxdev_filter_timeout(unsigned long data) +{ + struct dmxdev_filter *dmxdevfilter = (struct dmxdev_filter *)data; + + dmxdevfilter->buffer.error = -ETIMEDOUT; + spin_lock_irq(&dmxdevfilter->dev->lock); + dmxdevfilter->state = DMXDEV_STATE_TIMEDOUT; + spin_unlock_irq(&dmxdevfilter->dev->lock); + wake_up(&dmxdevfilter->buffer.queue); +} + +static void dvb_dmxdev_filter_timer(struct dmxdev_filter *dmxdevfilter) +{ + struct dmx_sct_filter_params *para = &dmxdevfilter->params.sec; + + del_timer(&dmxdevfilter->timer); + if (para->timeout) { + dmxdevfilter->timer.function = dvb_dmxdev_filter_timeout; + dmxdevfilter->timer.data = (unsigned long)dmxdevfilter; + dmxdevfilter->timer.expires = + jiffies + 1 + (HZ / 2 + HZ * para->timeout) / 1000; + add_timer(&dmxdevfilter->timer); + } +} + +static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, + const u8 *buffer2, size_t buffer2_len, + struct dmx_section_filter *filter, + enum dmx_success success) +{ + struct dmxdev_filter *dmxdevfilter = filter->priv; + int ret; + + if (dmxdevfilter->buffer.error) { + wake_up(&dmxdevfilter->buffer.queue); + return 0; + } + spin_lock(&dmxdevfilter->dev->lock); + if (dmxdevfilter->state != DMXDEV_STATE_GO) { + spin_unlock(&dmxdevfilter->dev->lock); + return 0; + } + del_timer(&dmxdevfilter->timer); + dprintk("dmxdev: section callback %*ph\n", 6, buffer1); + ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer1, + buffer1_len); + if (ret == buffer1_len) { + ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer2, + buffer2_len); + } + if (ret < 0) + dmxdevfilter->buffer.error = ret; + if (dmxdevfilter->params.sec.flags & DMX_ONESHOT) + dmxdevfilter->state = DMXDEV_STATE_DONE; + spin_unlock(&dmxdevfilter->dev->lock); + wake_up(&dmxdevfilter->buffer.queue); + return 0; +} + +static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, + const u8 *buffer2, size_t buffer2_len, + struct dmx_ts_feed *feed, + enum dmx_success success) +{ + struct dmxdev_filter *dmxdevfilter = feed->priv; + struct dvb_ringbuffer *buffer; + int ret; + + spin_lock(&dmxdevfilter->dev->lock); + if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) { + spin_unlock(&dmxdevfilter->dev->lock); + return 0; + } + + if (dmxdevfilter->params.pes.output == DMX_OUT_TAP + || dmxdevfilter->params.pes.output == DMX_OUT_TSDEMUX_TAP) + buffer = &dmxdevfilter->buffer; + else + buffer = &dmxdevfilter->dev->dvr_buffer; + if (buffer->error) { + spin_unlock(&dmxdevfilter->dev->lock); + wake_up(&buffer->queue); + return 0; + } + ret = dvb_dmxdev_buffer_write(buffer, buffer1, buffer1_len); + if (ret == buffer1_len) + ret = dvb_dmxdev_buffer_write(buffer, buffer2, buffer2_len); + if (ret < 0) + buffer->error = ret; + spin_unlock(&dmxdevfilter->dev->lock); + wake_up(&buffer->queue); + return 0; +} + +/* stop feed but only mark the specified filter as stopped (state set) */ +static int dvb_dmxdev_feed_stop(struct dmxdev_filter *dmxdevfilter) +{ + struct dmxdev_feed *feed; + + dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET); + + switch (dmxdevfilter->type) { + case DMXDEV_TYPE_SEC: + del_timer(&dmxdevfilter->timer); + dmxdevfilter->feed.sec->stop_filtering(dmxdevfilter->feed.sec); + break; + case DMXDEV_TYPE_PES: + list_for_each_entry(feed, &dmxdevfilter->feed.ts, next) + feed->ts->stop_filtering(feed->ts); + break; + default: + return -EINVAL; + } + return 0; +} + +/* start feed associated with the specified filter */ +static int dvb_dmxdev_feed_start(struct dmxdev_filter *filter) +{ + struct dmxdev_feed *feed; + int ret; + + dvb_dmxdev_filter_state_set(filter, DMXDEV_STATE_GO); + + switch (filter->type) { + case DMXDEV_TYPE_SEC: + return filter->feed.sec->start_filtering(filter->feed.sec); + case DMXDEV_TYPE_PES: + list_for_each_entry(feed, &filter->feed.ts, next) { + ret = feed->ts->start_filtering(feed->ts); + if (ret < 0) { + dvb_dmxdev_feed_stop(filter); + return ret; + } + } + break; + default: + return -EINVAL; + } + + return 0; +} + +/* restart section feed if it has filters left associated with it, + otherwise release the feed */ +static int dvb_dmxdev_feed_restart(struct dmxdev_filter *filter) +{ + int i; + struct dmxdev *dmxdev = filter->dev; + u16 pid = filter->params.sec.pid; + + for (i = 0; i < dmxdev->filternum; i++) + if (dmxdev->filter[i].state >= DMXDEV_STATE_GO && + dmxdev->filter[i].type == DMXDEV_TYPE_SEC && + dmxdev->filter[i].params.sec.pid == pid) { + dvb_dmxdev_feed_start(&dmxdev->filter[i]); + return 0; + } + + filter->dev->demux->release_section_feed(dmxdev->demux, + filter->feed.sec); + + return 0; +} + +static int dvb_dmxdev_filter_stop(struct dmxdev_filter *dmxdevfilter) +{ + struct dmxdev_feed *feed; + struct dmx_demux *demux; + + if (dmxdevfilter->state < DMXDEV_STATE_GO) + return 0; + + switch (dmxdevfilter->type) { + case DMXDEV_TYPE_SEC: + if (!dmxdevfilter->feed.sec) + break; + dvb_dmxdev_feed_stop(dmxdevfilter); + if (dmxdevfilter->filter.sec) + dmxdevfilter->feed.sec-> + release_filter(dmxdevfilter->feed.sec, + dmxdevfilter->filter.sec); + dvb_dmxdev_feed_restart(dmxdevfilter); + dmxdevfilter->feed.sec = NULL; + break; + case DMXDEV_TYPE_PES: + dvb_dmxdev_feed_stop(dmxdevfilter); + demux = dmxdevfilter->dev->demux; + list_for_each_entry(feed, &dmxdevfilter->feed.ts, next) { + demux->release_ts_feed(demux, feed->ts); + feed->ts = NULL; + } + break; + default: + if (dmxdevfilter->state == DMXDEV_STATE_ALLOCATED) + return 0; + return -EINVAL; + } + + dvb_ringbuffer_flush(&dmxdevfilter->buffer); + return 0; +} + +static void dvb_dmxdev_delete_pids(struct dmxdev_filter *dmxdevfilter) +{ + struct dmxdev_feed *feed, *tmp; + + /* delete all PIDs */ + list_for_each_entry_safe(feed, tmp, &dmxdevfilter->feed.ts, next) { + list_del(&feed->next); + kfree(feed); + } + + BUG_ON(!list_empty(&dmxdevfilter->feed.ts)); +} + +static inline int dvb_dmxdev_filter_reset(struct dmxdev_filter *dmxdevfilter) +{ + if (dmxdevfilter->state < DMXDEV_STATE_SET) + return 0; + + if (dmxdevfilter->type == DMXDEV_TYPE_PES) + dvb_dmxdev_delete_pids(dmxdevfilter); + + dmxdevfilter->type = DMXDEV_TYPE_NONE; + dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED); + return 0; +} + +static int dvb_dmxdev_start_feed(struct dmxdev *dmxdev, + struct dmxdev_filter *filter, + struct dmxdev_feed *feed) +{ + struct timespec timeout = { 0 }; + struct dmx_pes_filter_params *para = &filter->params.pes; + dmx_output_t otype; + int ret; + int ts_type; + enum dmx_ts_pes ts_pes; + struct dmx_ts_feed *tsfeed; + + feed->ts = NULL; + otype = para->output; + + ts_pes = para->pes_type; + + if (ts_pes < DMX_PES_OTHER) + ts_type = TS_DECODER; + else + ts_type = 0; + + if (otype == DMX_OUT_TS_TAP) + ts_type |= TS_PACKET; + else if (otype == DMX_OUT_TSDEMUX_TAP) + ts_type |= TS_PACKET | TS_DEMUX; + else if (otype == DMX_OUT_TAP) + ts_type |= TS_PACKET | TS_DEMUX | TS_PAYLOAD_ONLY; + + ret = dmxdev->demux->allocate_ts_feed(dmxdev->demux, &feed->ts, + dvb_dmxdev_ts_callback); + if (ret < 0) + return ret; + + tsfeed = feed->ts; + tsfeed->priv = filter; + + ret = tsfeed->set(tsfeed, feed->pid, ts_type, ts_pes, 32768, timeout); + if (ret < 0) { + dmxdev->demux->release_ts_feed(dmxdev->demux, tsfeed); + return ret; + } + + ret = tsfeed->start_filtering(tsfeed); + if (ret < 0) { + dmxdev->demux->release_ts_feed(dmxdev->demux, tsfeed); + return ret; + } + + return 0; +} + +static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter) +{ + struct dmxdev *dmxdev = filter->dev; + struct dmxdev_feed *feed; + void *mem; + int ret, i; + + if (filter->state < DMXDEV_STATE_SET) + return -EINVAL; + + if (filter->state >= DMXDEV_STATE_GO) + dvb_dmxdev_filter_stop(filter); + + if (!filter->buffer.data) { + mem = vmalloc(filter->buffer.size); + if (!mem) + return -ENOMEM; + spin_lock_irq(&filter->dev->lock); + filter->buffer.data = mem; + spin_unlock_irq(&filter->dev->lock); + } + + dvb_ringbuffer_flush(&filter->buffer); + + switch (filter->type) { + case DMXDEV_TYPE_SEC: + { + struct dmx_sct_filter_params *para = &filter->params.sec; + struct dmx_section_filter **secfilter = &filter->filter.sec; + struct dmx_section_feed **secfeed = &filter->feed.sec; + + *secfilter = NULL; + *secfeed = NULL; + + + /* find active filter/feed with same PID */ + for (i = 0; i < dmxdev->filternum; i++) { + if (dmxdev->filter[i].state >= DMXDEV_STATE_GO && + dmxdev->filter[i].type == DMXDEV_TYPE_SEC && + dmxdev->filter[i].params.sec.pid == para->pid) { + *secfeed = dmxdev->filter[i].feed.sec; + break; + } + } + + /* if no feed found, try to allocate new one */ + if (!*secfeed) { + ret = dmxdev->demux->allocate_section_feed(dmxdev->demux, + secfeed, + dvb_dmxdev_section_callback); + if (ret < 0) { + printk("DVB (%s): could not alloc feed\n", + __func__); + return ret; + } + + ret = (*secfeed)->set(*secfeed, para->pid, 32768, + (para->flags & DMX_CHECK_CRC) ? 1 : 0); + if (ret < 0) { + printk("DVB (%s): could not set feed\n", + __func__); + dvb_dmxdev_feed_restart(filter); + return ret; + } + } else { + dvb_dmxdev_feed_stop(filter); + } + + ret = (*secfeed)->allocate_filter(*secfeed, secfilter); + if (ret < 0) { + dvb_dmxdev_feed_restart(filter); + filter->feed.sec->start_filtering(*secfeed); + dprintk("could not get filter\n"); + return ret; + } + + (*secfilter)->priv = filter; + + memcpy(&((*secfilter)->filter_value[3]), + &(para->filter.filter[1]), DMX_FILTER_SIZE - 1); + memcpy(&(*secfilter)->filter_mask[3], + ¶->filter.mask[1], DMX_FILTER_SIZE - 1); + memcpy(&(*secfilter)->filter_mode[3], + ¶->filter.mode[1], DMX_FILTER_SIZE - 1); + + (*secfilter)->filter_value[0] = para->filter.filter[0]; + (*secfilter)->filter_mask[0] = para->filter.mask[0]; + (*secfilter)->filter_mode[0] = para->filter.mode[0]; + (*secfilter)->filter_mask[1] = 0; + (*secfilter)->filter_mask[2] = 0; + + filter->todo = 0; + + ret = filter->feed.sec->start_filtering(filter->feed.sec); + if (ret < 0) + return ret; + + dvb_dmxdev_filter_timer(filter); + break; + } + case DMXDEV_TYPE_PES: + list_for_each_entry(feed, &filter->feed.ts, next) { + ret = dvb_dmxdev_start_feed(dmxdev, filter, feed); + if (ret < 0) { + dvb_dmxdev_filter_stop(filter); + return ret; + } + } + break; + default: + return -EINVAL; + } + + dvb_dmxdev_filter_state_set(filter, DMXDEV_STATE_GO); + return 0; +} + +static int dvb_demux_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; + int i; + struct dmxdev_filter *dmxdevfilter; + + if (!dmxdev->filter) + return -EINVAL; + + if (mutex_lock_interruptible(&dmxdev->mutex)) + return -ERESTARTSYS; + + for (i = 0; i < dmxdev->filternum; i++) + if (dmxdev->filter[i].state == DMXDEV_STATE_FREE) + break; + + if (i == dmxdev->filternum) { + mutex_unlock(&dmxdev->mutex); + return -EMFILE; + } + + dmxdevfilter = &dmxdev->filter[i]; + mutex_init(&dmxdevfilter->mutex); + file->private_data = dmxdevfilter; + + dvb_ringbuffer_init(&dmxdevfilter->buffer, NULL, 8192); + dmxdevfilter->type = DMXDEV_TYPE_NONE; + dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED); + init_timer(&dmxdevfilter->timer); + + dvbdev->users++; + + mutex_unlock(&dmxdev->mutex); + return 0; +} + +static int dvb_dmxdev_filter_free(struct dmxdev *dmxdev, + struct dmxdev_filter *dmxdevfilter) +{ + mutex_lock(&dmxdev->mutex); + mutex_lock(&dmxdevfilter->mutex); + + dvb_dmxdev_filter_stop(dmxdevfilter); + dvb_dmxdev_filter_reset(dmxdevfilter); + + if (dmxdevfilter->buffer.data) { + void *mem = dmxdevfilter->buffer.data; + + spin_lock_irq(&dmxdev->lock); + dmxdevfilter->buffer.data = NULL; + spin_unlock_irq(&dmxdev->lock); + vfree(mem); + } + + dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_FREE); + wake_up(&dmxdevfilter->buffer.queue); + mutex_unlock(&dmxdevfilter->mutex); + mutex_unlock(&dmxdev->mutex); + return 0; +} + +static inline void invert_mode(dmx_filter_t *filter) +{ + int i; + + for (i = 0; i < DMX_FILTER_SIZE; i++) + filter->mode[i] ^= 0xff; +} + +static int dvb_dmxdev_add_pid(struct dmxdev *dmxdev, + struct dmxdev_filter *filter, u16 pid) +{ + struct dmxdev_feed *feed; + + if ((filter->type != DMXDEV_TYPE_PES) || + (filter->state < DMXDEV_STATE_SET)) + return -EINVAL; + + /* only TS packet filters may have multiple PIDs */ + if ((filter->params.pes.output != DMX_OUT_TSDEMUX_TAP) && + (!list_empty(&filter->feed.ts))) + return -EINVAL; + + feed = kzalloc(sizeof(struct dmxdev_feed), GFP_KERNEL); + if (feed == NULL) + return -ENOMEM; + + feed->pid = pid; + list_add(&feed->next, &filter->feed.ts); + + if (filter->state >= DMXDEV_STATE_GO) + return dvb_dmxdev_start_feed(dmxdev, filter, feed); + + return 0; +} + +static int dvb_dmxdev_remove_pid(struct dmxdev *dmxdev, + struct dmxdev_filter *filter, u16 pid) +{ + struct dmxdev_feed *feed, *tmp; + + if ((filter->type != DMXDEV_TYPE_PES) || + (filter->state < DMXDEV_STATE_SET)) + return -EINVAL; + + list_for_each_entry_safe(feed, tmp, &filter->feed.ts, next) { + if ((feed->pid == pid) && (feed->ts != NULL)) { + feed->ts->stop_filtering(feed->ts); + filter->dev->demux->release_ts_feed(filter->dev->demux, + feed->ts); + list_del(&feed->next); + kfree(feed); + } + } + + return 0; +} + +static int dvb_dmxdev_filter_set(struct dmxdev *dmxdev, + struct dmxdev_filter *dmxdevfilter, + struct dmx_sct_filter_params *params) +{ + dprintk("function : %s, PID=0x%04x, flags=%02x, timeout=%d\n", + __func__, params->pid, params->flags, params->timeout); + + dvb_dmxdev_filter_stop(dmxdevfilter); + + dmxdevfilter->type = DMXDEV_TYPE_SEC; + memcpy(&dmxdevfilter->params.sec, + params, sizeof(struct dmx_sct_filter_params)); + invert_mode(&dmxdevfilter->params.sec.filter); + dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET); + + if (params->flags & DMX_IMMEDIATE_START) + return dvb_dmxdev_filter_start(dmxdevfilter); + + return 0; +} + +static int dvb_dmxdev_pes_filter_set(struct dmxdev *dmxdev, + struct dmxdev_filter *dmxdevfilter, + struct dmx_pes_filter_params *params) +{ + int ret; + + dvb_dmxdev_filter_stop(dmxdevfilter); + dvb_dmxdev_filter_reset(dmxdevfilter); + + if ((unsigned)params->pes_type > DMX_PES_OTHER) + return -EINVAL; + + dmxdevfilter->type = DMXDEV_TYPE_PES; + memcpy(&dmxdevfilter->params, params, + sizeof(struct dmx_pes_filter_params)); + INIT_LIST_HEAD(&dmxdevfilter->feed.ts); + + dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET); + + ret = dvb_dmxdev_add_pid(dmxdev, dmxdevfilter, + dmxdevfilter->params.pes.pid); + if (ret < 0) + return ret; + + if (params->flags & DMX_IMMEDIATE_START) + return dvb_dmxdev_filter_start(dmxdevfilter); + + return 0; +} + +static ssize_t dvb_dmxdev_read_sec(struct dmxdev_filter *dfil, + struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int result, hcount; + int done = 0; + + if (dfil->todo <= 0) { + hcount = 3 + dfil->todo; + if (hcount > count) + hcount = count; + result = dvb_dmxdev_buffer_read(&dfil->buffer, + file->f_flags & O_NONBLOCK, + buf, hcount, ppos); + if (result < 0) { + dfil->todo = 0; + return result; + } + if (copy_from_user(dfil->secheader - dfil->todo, buf, result)) + return -EFAULT; + buf += result; + done = result; + count -= result; + dfil->todo -= result; + if (dfil->todo > -3) + return done; + dfil->todo = ((dfil->secheader[1] << 8) | dfil->secheader[2]) & 0xfff; + if (!count) + return done; + } + if (count > dfil->todo) + count = dfil->todo; + result = dvb_dmxdev_buffer_read(&dfil->buffer, + file->f_flags & O_NONBLOCK, + buf, count, ppos); + if (result < 0) + return result; + dfil->todo -= result; + return (result + done); +} + +static ssize_t +dvb_demux_read(struct file *file, char __user *buf, size_t count, + loff_t *ppos) +{ + struct dmxdev_filter *dmxdevfilter = file->private_data; + int ret; + + if (mutex_lock_interruptible(&dmxdevfilter->mutex)) + return -ERESTARTSYS; + + if (dmxdevfilter->type == DMXDEV_TYPE_SEC) + ret = dvb_dmxdev_read_sec(dmxdevfilter, file, buf, count, ppos); + else + ret = dvb_dmxdev_buffer_read(&dmxdevfilter->buffer, + file->f_flags & O_NONBLOCK, + buf, count, ppos); + + mutex_unlock(&dmxdevfilter->mutex); + return ret; +} + +static int dvb_demux_do_ioctl(struct file *file, + unsigned int cmd, void *parg) +{ + struct dmxdev_filter *dmxdevfilter = file->private_data; + struct dmxdev *dmxdev = dmxdevfilter->dev; + unsigned long arg = (unsigned long)parg; + int ret = 0; + + if (mutex_lock_interruptible(&dmxdev->mutex)) + return -ERESTARTSYS; + + switch (cmd) { + case DMX_START: + if (mutex_lock_interruptible(&dmxdevfilter->mutex)) { + mutex_unlock(&dmxdev->mutex); + return -ERESTARTSYS; + } + if (dmxdevfilter->state < DMXDEV_STATE_SET) + ret = -EINVAL; + else + ret = dvb_dmxdev_filter_start(dmxdevfilter); + mutex_unlock(&dmxdevfilter->mutex); + break; + + case DMX_STOP: + if (mutex_lock_interruptible(&dmxdevfilter->mutex)) { + mutex_unlock(&dmxdev->mutex); + return -ERESTARTSYS; + } + ret = dvb_dmxdev_filter_stop(dmxdevfilter); + mutex_unlock(&dmxdevfilter->mutex); + break; + + case DMX_SET_FILTER: + if (mutex_lock_interruptible(&dmxdevfilter->mutex)) { + mutex_unlock(&dmxdev->mutex); + return -ERESTARTSYS; + } + ret = dvb_dmxdev_filter_set(dmxdev, dmxdevfilter, parg); + mutex_unlock(&dmxdevfilter->mutex); + break; + + case DMX_SET_PES_FILTER: + if (mutex_lock_interruptible(&dmxdevfilter->mutex)) { + mutex_unlock(&dmxdev->mutex); + return -ERESTARTSYS; + } + ret = dvb_dmxdev_pes_filter_set(dmxdev, dmxdevfilter, parg); + mutex_unlock(&dmxdevfilter->mutex); + break; + + case DMX_SET_BUFFER_SIZE: + if (mutex_lock_interruptible(&dmxdevfilter->mutex)) { + mutex_unlock(&dmxdev->mutex); + return -ERESTARTSYS; + } + ret = dvb_dmxdev_set_buffer_size(dmxdevfilter, arg); + mutex_unlock(&dmxdevfilter->mutex); + break; + + case DMX_GET_PES_PIDS: + if (!dmxdev->demux->get_pes_pids) { + ret = -EINVAL; + break; + } + dmxdev->demux->get_pes_pids(dmxdev->demux, parg); + break; + + case DMX_GET_CAPS: + if (!dmxdev->demux->get_caps) { + ret = -EINVAL; + break; + } + ret = dmxdev->demux->get_caps(dmxdev->demux, parg); + break; + + case DMX_SET_SOURCE: + if (!dmxdev->demux->set_source) { + ret = -EINVAL; + break; + } + ret = dmxdev->demux->set_source(dmxdev->demux, parg); + break; + + case DMX_GET_STC: + if (!dmxdev->demux->get_stc) { + ret = -EINVAL; + break; + } + ret = dmxdev->demux->get_stc(dmxdev->demux, + ((struct dmx_stc *)parg)->num, + &((struct dmx_stc *)parg)->stc, + &((struct dmx_stc *)parg)->base); + break; + + case DMX_ADD_PID: + if (mutex_lock_interruptible(&dmxdevfilter->mutex)) { + ret = -ERESTARTSYS; + break; + } + ret = dvb_dmxdev_add_pid(dmxdev, dmxdevfilter, *(u16 *)parg); + mutex_unlock(&dmxdevfilter->mutex); + break; + + case DMX_REMOVE_PID: + if (mutex_lock_interruptible(&dmxdevfilter->mutex)) { + ret = -ERESTARTSYS; + break; + } + ret = dvb_dmxdev_remove_pid(dmxdev, dmxdevfilter, *(u16 *)parg); + mutex_unlock(&dmxdevfilter->mutex); + break; + + default: + ret = -EINVAL; + break; + } + mutex_unlock(&dmxdev->mutex); + return ret; +} + +static long dvb_demux_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + return dvb_usercopy(file, cmd, arg, dvb_demux_do_ioctl); +} + +static unsigned int dvb_demux_poll(struct file *file, poll_table *wait) +{ + struct dmxdev_filter *dmxdevfilter = file->private_data; + unsigned int mask = 0; + + if (!dmxdevfilter) + return -EINVAL; + + poll_wait(file, &dmxdevfilter->buffer.queue, wait); + + if (dmxdevfilter->state != DMXDEV_STATE_GO && + dmxdevfilter->state != DMXDEV_STATE_DONE && + dmxdevfilter->state != DMXDEV_STATE_TIMEDOUT) + return 0; + + if (dmxdevfilter->buffer.error) + mask |= (POLLIN | POLLRDNORM | POLLPRI | POLLERR); + + if (!dvb_ringbuffer_empty(&dmxdevfilter->buffer)) + mask |= (POLLIN | POLLRDNORM | POLLPRI); + + return mask; +} + +static int dvb_demux_release(struct inode *inode, struct file *file) +{ + struct dmxdev_filter *dmxdevfilter = file->private_data; + struct dmxdev *dmxdev = dmxdevfilter->dev; + + int ret; + + ret = dvb_dmxdev_filter_free(dmxdev, dmxdevfilter); + + mutex_lock(&dmxdev->mutex); + dmxdev->dvbdev->users--; + if(dmxdev->dvbdev->users==1 && dmxdev->exit==1) { + fops_put(file->f_op); + file->f_op = NULL; + mutex_unlock(&dmxdev->mutex); + wake_up(&dmxdev->dvbdev->wait_queue); + } else + mutex_unlock(&dmxdev->mutex); + + return ret; +} + +static const struct file_operations dvb_demux_fops = { + .owner = THIS_MODULE, + .read = dvb_demux_read, + .unlocked_ioctl = dvb_demux_ioctl, + .open = dvb_demux_open, + .release = dvb_demux_release, + .poll = dvb_demux_poll, + .llseek = default_llseek, +}; + +static struct dvb_device dvbdev_demux = { + .priv = NULL, + .users = 1, + .writers = 1, + .fops = &dvb_demux_fops +}; + +static int dvb_dvr_do_ioctl(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; + unsigned long arg = (unsigned long)parg; + int ret; + + if (mutex_lock_interruptible(&dmxdev->mutex)) + return -ERESTARTSYS; + + switch (cmd) { + case DMX_SET_BUFFER_SIZE: + ret = dvb_dvr_set_buffer_size(dmxdev, arg); + break; + + default: + ret = -EINVAL; + break; + } + mutex_unlock(&dmxdev->mutex); + return ret; +} + +static long dvb_dvr_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + return dvb_usercopy(file, cmd, arg, dvb_dvr_do_ioctl); +} + +static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait) +{ + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; + unsigned int mask = 0; + + dprintk("function : %s\n", __func__); + + poll_wait(file, &dmxdev->dvr_buffer.queue, wait); + + if ((file->f_flags & O_ACCMODE) == O_RDONLY) { + if (dmxdev->dvr_buffer.error) + mask |= (POLLIN | POLLRDNORM | POLLPRI | POLLERR); + + if (!dvb_ringbuffer_empty(&dmxdev->dvr_buffer)) + mask |= (POLLIN | POLLRDNORM | POLLPRI); + } else + mask |= (POLLOUT | POLLWRNORM | POLLPRI); + + return mask; +} + +static const struct file_operations dvb_dvr_fops = { + .owner = THIS_MODULE, + .read = dvb_dvr_read, + .write = dvb_dvr_write, + .unlocked_ioctl = dvb_dvr_ioctl, + .open = dvb_dvr_open, + .release = dvb_dvr_release, + .poll = dvb_dvr_poll, + .llseek = default_llseek, +}; + +static struct dvb_device dvbdev_dvr = { + .priv = NULL, + .readers = 1, + .users = 1, + .fops = &dvb_dvr_fops +}; + +int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter) +{ + int i; + + if (dmxdev->demux->open(dmxdev->demux) < 0) + return -EUSERS; + + dmxdev->filter = vmalloc(dmxdev->filternum * sizeof(struct dmxdev_filter)); + if (!dmxdev->filter) + return -ENOMEM; + + mutex_init(&dmxdev->mutex); + spin_lock_init(&dmxdev->lock); + for (i = 0; i < dmxdev->filternum; i++) { + dmxdev->filter[i].dev = dmxdev; + dmxdev->filter[i].buffer.data = NULL; + dvb_dmxdev_filter_state_set(&dmxdev->filter[i], + DMXDEV_STATE_FREE); + } + + dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev, + DVB_DEVICE_DEMUX); + dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr, + dmxdev, DVB_DEVICE_DVR); + + dvb_ringbuffer_init(&dmxdev->dvr_buffer, NULL, 8192); + + return 0; +} + +EXPORT_SYMBOL(dvb_dmxdev_init); + +void dvb_dmxdev_release(struct dmxdev *dmxdev) +{ + dmxdev->exit=1; + if (dmxdev->dvbdev->users > 1) { + wait_event(dmxdev->dvbdev->wait_queue, + dmxdev->dvbdev->users==1); + } + if (dmxdev->dvr_dvbdev->users > 1) { + wait_event(dmxdev->dvr_dvbdev->wait_queue, + dmxdev->dvr_dvbdev->users==1); + } + + dvb_unregister_device(dmxdev->dvbdev); + dvb_unregister_device(dmxdev->dvr_dvbdev); + + vfree(dmxdev->filter); + dmxdev->filter = NULL; + dmxdev->demux->close(dmxdev->demux); +} + +EXPORT_SYMBOL(dvb_dmxdev_release); diff --git a/drivers/media/dvb-core/dmxdev.h b/drivers/media/dvb-core/dmxdev.h new file mode 100644 index 00000000..48c6cf92 --- /dev/null +++ b/drivers/media/dvb-core/dmxdev.h @@ -0,0 +1,119 @@ +/* + * dmxdev.h + * + * Copyright (C) 2000 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DMXDEV_H_ +#define _DMXDEV_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "dvbdev.h" +#include "demux.h" +#include "dvb_ringbuffer.h" + +enum dmxdev_type { + DMXDEV_TYPE_NONE, + DMXDEV_TYPE_SEC, + DMXDEV_TYPE_PES, +}; + +enum dmxdev_state { + DMXDEV_STATE_FREE, + DMXDEV_STATE_ALLOCATED, + DMXDEV_STATE_SET, + DMXDEV_STATE_GO, + DMXDEV_STATE_DONE, + DMXDEV_STATE_TIMEDOUT +}; + +struct dmxdev_feed { + u16 pid; + struct dmx_ts_feed *ts; + struct list_head next; +}; + +struct dmxdev_filter { + union { + struct dmx_section_filter *sec; + } filter; + + union { + /* list of TS and PES feeds (struct dmxdev_feed) */ + struct list_head ts; + struct dmx_section_feed *sec; + } feed; + + union { + struct dmx_sct_filter_params sec; + struct dmx_pes_filter_params pes; + } params; + + enum dmxdev_type type; + enum dmxdev_state state; + struct dmxdev *dev; + struct dvb_ringbuffer buffer; + + struct mutex mutex; + + /* only for sections */ + struct timer_list timer; + int todo; + u8 secheader[3]; +}; + + +struct dmxdev { + struct dvb_device *dvbdev; + struct dvb_device *dvr_dvbdev; + + struct dmxdev_filter *filter; + struct dmx_demux *demux; + + int filternum; + int capabilities; + + unsigned int exit:1; +#define DMXDEV_CAP_DUPLEX 1 + struct dmx_frontend *dvr_orig_fe; + + struct dvb_ringbuffer dvr_buffer; +#define DVR_BUFFER_SIZE (10*188*1024) + + struct mutex mutex; + spinlock_t lock; +}; + + +int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *); +void dvb_dmxdev_release(struct dmxdev *dmxdev); + +#endif /* _DMXDEV_H_ */ diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h new file mode 100644 index 00000000..335a8f46 --- /dev/null +++ b/drivers/media/dvb-core/dvb-usb-ids.h @@ -0,0 +1,370 @@ +/* dvb-usb-ids.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) see + * dvb-usb-init.c for copyright information. + * + * a header file containing define's for the USB device supported by the + * various drivers. + */ +#ifndef _DVB_USB_IDS_H_ +#define _DVB_USB_IDS_H_ + +/* Vendor IDs */ +#define USB_VID_ADSTECH 0x06e1 +#define USB_VID_AFATECH 0x15a4 +#define USB_VID_ALCOR_MICRO 0x058f +#define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 +#define USB_VID_ANCHOR 0x0547 +#define USB_VID_ANSONIC 0x10b9 +#define USB_VID_ANUBIS_ELECTRONIC 0x10fd +#define USB_VID_ASUS 0x0b05 +#define USB_VID_AVERMEDIA 0x07ca +#define USB_VID_COMPRO 0x185b +#define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CONEXANT 0x0572 +#define USB_VID_CYPRESS 0x04b4 +#define USB_VID_DEXATEK 0x1d19 +#define USB_VID_DIBCOM 0x10b8 +#define USB_VID_DPOSH 0x1498 +#define USB_VID_DVICO 0x0fe9 +#define USB_VID_E3C 0x18b4 +#define USB_VID_ELGATO 0x0fd9 +#define USB_VID_EMPIA 0xeb1a +#define USB_VID_GENPIX 0x09c0 +#define USB_VID_GRANDTEC 0x5032 +#define USB_VID_GTEK 0x1f4d +#define USB_VID_HANFTEK 0x15f4 +#define USB_VID_HAUPPAUGE 0x2040 +#define USB_VID_HYPER_PALTEK 0x1025 +#define USB_VID_INTEL 0x8086 +#define USB_VID_ITETECH 0x048d +#define USB_VID_KWORLD 0xeb2a +#define USB_VID_KWORLD_2 0x1b80 +#define USB_VID_KYE 0x0458 +#define USB_VID_LEADTEK 0x0413 +#define USB_VID_LITEON 0x04ca +#define USB_VID_MEDION 0x1660 +#define USB_VID_MIGLIA 0x18f3 +#define USB_VID_MSI 0x0db0 +#define USB_VID_MSI_2 0x1462 +#define USB_VID_OPERA1 0x695c +#define USB_VID_PINNACLE 0x2304 +#define USB_VID_PCTV 0x2013 +#define USB_VID_PIXELVIEW 0x1554 +#define USB_VID_REALTEK 0x0bda +#define USB_VID_TECHNOTREND 0x0b48 +#define USB_VID_TERRATEC 0x0ccd +#define USB_VID_TELESTAR 0x10b9 +#define USB_VID_VISIONPLUS 0x13d3 +#define USB_VID_SONY 0x1415 +#define USB_VID_TWINHAN 0x1822 +#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 +#define USB_VID_UNIWILL 0x1584 +#define USB_VID_WIDEVIEW 0x14aa +#define USB_VID_GIGABYTE 0x1044 +#define USB_VID_YUAN 0x1164 +#define USB_VID_XTENSIONS 0x1ae7 +#define USB_VID_HUMAX_COEX 0x10b9 +#define USB_VID_774 0x7a69 +#define USB_VID_EVOLUTEPC 0x1e59 +#define USB_VID_AZUREWAVE 0x13d3 +#define USB_VID_TECHNISAT 0x14f7 + +/* Product IDs */ +#define USB_PID_ADSTECH_USB2_COLD 0xa333 +#define USB_PID_ADSTECH_USB2_WARM 0xa334 +#define USB_PID_AFATECH_AF9005 0x9020 +#define USB_PID_AFATECH_AF9015_9015 0x9015 +#define USB_PID_AFATECH_AF9015_9016 0x9016 +#define USB_PID_AFATECH_AF9035_1000 0x1000 +#define USB_PID_AFATECH_AF9035_1001 0x1001 +#define USB_PID_AFATECH_AF9035_1002 0x1002 +#define USB_PID_AFATECH_AF9035_1003 0x1003 +#define USB_PID_AFATECH_AF9035_9035 0x9035 +#define USB_PID_TREKSTOR_DVBT 0x901b +#define USB_PID_TREKSTOR_TERRES_2_0 0xC803 +#define USB_VID_ALINK_DTU 0xf170 +#define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f +#define USB_PID_AZUREWAVE_AD_TU700 0x3237 +#define USB_PID_AZUREWAVE_6007 0x0ccd +#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 +#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 +#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 +#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xa801 +#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 +#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 +#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c +#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d +#define USB_PID_COMPRO_VIDEOMATE_U500 0x1e78 +#define USB_PID_COMPRO_VIDEOMATE_U500_PC 0x1e80 +#define USB_PID_CONCEPTRONIC_CTVDIGRCU 0xe397 +#define USB_PID_CONEXANT_D680_DMB 0x86d6 +#define USB_PID_CREATIX_CTX1921 0x1921 +#define USB_PID_DELOCK_USB2_DVBT 0xb803 +#define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 +#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 +#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 +#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 +#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 +#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 +#define USB_PID_DIBCOM_STK7700P 0x1e14 +#define USB_PID_DIBCOM_STK7700P_PC 0x1e78 +#define USB_PID_DIBCOM_STK7700D 0x1ef0 +#define USB_PID_DIBCOM_STK7700_U7000 0x7001 +#define USB_PID_DIBCOM_STK7070P 0x1ebc +#define USB_PID_DIBCOM_STK7070PD 0x1ebe +#define USB_PID_DIBCOM_STK807XP 0x1f90 +#define USB_PID_DIBCOM_STK807XPVR 0x1f98 +#define USB_PID_DIBCOM_STK8096GP 0x1fa0 +#define USB_PID_DIBCOM_NIM8096MD 0x1fa8 +#define USB_PID_DIBCOM_TFE8096P 0x1f9C +#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 +#define USB_PID_DIBCOM_STK7770P 0x1e80 +#define USB_PID_DIBCOM_NIM7090 0x1bb2 +#define USB_PID_DIBCOM_TFE7090PVR 0x1bb4 +#define USB_PID_DIBCOM_TFE7790P 0x1e6e +#define USB_PID_DIBCOM_NIM9090M 0x2383 +#define USB_PID_DIBCOM_NIM9090MD 0x2384 +#define USB_PID_DPOSH_M9206_COLD 0x9206 +#define USB_PID_DPOSH_M9206_WARM 0xa090 +#define USB_PID_E3C_EC168 0x1689 +#define USB_PID_E3C_EC168_2 0xfffa +#define USB_PID_E3C_EC168_3 0xfffb +#define USB_PID_E3C_EC168_4 0x1001 +#define USB_PID_E3C_EC168_5 0x1002 +#define USB_PID_FREECOM_DVBT 0x0160 +#define USB_PID_FREECOM_DVBT_2 0x0161 +#define USB_PID_UNIWILL_STK7700P 0x6003 +#define USB_PID_GENIUS_TVGO_DVB_T03 0x4012 +#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 +#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_INTEL_CE9500 0x9500 +#define USB_PID_ITETECH_IT9135 0x9135 +#define USB_PID_ITETECH_IT9135_9005 0x9005 +#define USB_PID_ITETECH_IT9135_9006 0x9006 +#define USB_PID_KWORLD_399U 0xe399 +#define USB_PID_KWORLD_399U_2 0xe400 +#define USB_PID_KWORLD_395U 0xe396 +#define USB_PID_KWORLD_395U_2 0xe39b +#define USB_PID_KWORLD_395U_3 0xe395 +#define USB_PID_KWORLD_395U_4 0xe39a +#define USB_PID_KWORLD_MC810 0xc810 +#define USB_PID_KWORLD_PC160_2T 0xc160 +#define USB_PID_KWORLD_PC160_T 0xc161 +#define USB_PID_KWORLD_UB383_T 0xe383 +#define USB_PID_KWORLD_UB499_2T_T09 0xe409 +#define USB_PID_KWORLD_VSTREAM_COLD 0x17de +#define USB_PID_KWORLD_VSTREAM_WARM 0x17df +#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055 +#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069 +#define USB_PID_TERRATEC_CINERGY_T_STICK 0x0093 +#define USB_PID_TERRATEC_CINERGY_T_STICK_RC 0x0097 +#define USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC 0x0099 +#define USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1 0x00a9 +#define USB_PID_TWINHAN_VP7041_COLD 0x3201 +#define USB_PID_TWINHAN_VP7041_WARM 0x3202 +#define USB_PID_TWINHAN_VP7020_COLD 0x3203 +#define USB_PID_TWINHAN_VP7020_WARM 0x3204 +#define USB_PID_TWINHAN_VP7045_COLD 0x3205 +#define USB_PID_TWINHAN_VP7045_WARM 0x3206 +#define USB_PID_TWINHAN_VP7021_COLD 0x3207 +#define USB_PID_TWINHAN_VP7021_WARM 0x3208 +#define USB_PID_TWINHAN_VP7049 0x3219 +#define USB_PID_TINYTWIN 0x3226 +#define USB_PID_TINYTWIN_2 0xe402 +#define USB_PID_TINYTWIN_3 0x9016 +#define USB_PID_DNTV_TINYUSB2_COLD 0x3223 +#define USB_PID_DNTV_TINYUSB2_WARM 0x3224 +#define USB_PID_ULTIMA_TVBOX_COLD 0x8105 +#define USB_PID_ULTIMA_TVBOX_WARM 0x8106 +#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 +#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 +#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 +#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 +#define USB_PID_ULTIMA_TVBOX_USB2_WARM 0x810a +#define USB_PID_ARTEC_T14_COLD 0x810b +#define USB_PID_ARTEC_T14_WARM 0x810c +#define USB_PID_ARTEC_T14BR 0x810f +#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 +#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 +#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e +#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f +#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 +#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 +#define USB_PID_DTT200U_COLD 0x0201 +#define USB_PID_DTT200U_WARM 0x0301 +#define USB_PID_WT220U_ZAP250_COLD 0x0220 +#define USB_PID_WT220U_COLD 0x0222 +#define USB_PID_WT220U_WARM 0x0221 +#define USB_PID_WT220U_FC_COLD 0x0225 +#define USB_PID_WT220U_FC_WARM 0x0226 +#define USB_PID_WT220U_ZL0353_COLD 0x022a +#define USB_PID_WT220U_ZL0353_WARM 0x022b +#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 +#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 +#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941 +#define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950 +#define USB_PID_HAUPPAUGE_NOVA_T_500_3 0x8400 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070 +#define USB_PID_HAUPPAUGE_MYTV_T 0x7080 +#define USB_PID_HAUPPAUGE_NOVA_TD_STICK 0x9580 +#define USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009 0x5200 +#define USB_PID_HAUPPAUGE_TIGER_ATSC 0xb200 +#define USB_PID_HAUPPAUGE_TIGER_ATSC_B210 0xb210 +#define USB_PID_AVERMEDIA_EXPRESS 0xb568 +#define USB_PID_AVERMEDIA_VOLAR 0xa807 +#define USB_PID_AVERMEDIA_VOLAR_2 0xb808 +#define USB_PID_AVERMEDIA_VOLAR_A868R 0xa868 +#define USB_PID_AVERMEDIA_MCE_USB_M038 0x1228 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R 0x0039 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC 0x1039 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 +#define USB_PID_AVERMEDIA_VOLAR_X 0xa815 +#define USB_PID_AVERMEDIA_VOLAR_X_2 0x8150 +#define USB_PID_AVERMEDIA_A309 0xa309 +#define USB_PID_AVERMEDIA_A310 0xa310 +#define USB_PID_AVERMEDIA_A850 0x850a +#define USB_PID_AVERMEDIA_A850T 0x850b +#define USB_PID_AVERMEDIA_A805 0xa805 +#define USB_PID_AVERMEDIA_A815M 0x815a +#define USB_PID_AVERMEDIA_A835 0xa835 +#define USB_PID_AVERMEDIA_B835 0xb835 +#define USB_PID_AVERMEDIA_A835B_1835 0x1835 +#define USB_PID_AVERMEDIA_A835B_2835 0x2835 +#define USB_PID_AVERMEDIA_A835B_3835 0x3835 +#define USB_PID_AVERMEDIA_A835B_4835 0x4835 +#define USB_PID_AVERMEDIA_1867 0x1867 +#define USB_PID_AVERMEDIA_A867 0xa867 +#define USB_PID_AVERMEDIA_TWINSTAR 0x0825 +#define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 +#define USB_PID_TECHNOTREND_CONNECT_S2400_8KEEPROM 0x3009 +#define USB_PID_TECHNOTREND_CONNECT_CT3650 0x300d +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081 +#define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 +#define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 +#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 +#define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 +#define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab +#define USB_PID_TERRATEC_H7 0x10b4 +#define USB_PID_TERRATEC_H7_2 0x10a3 +#define USB_PID_TERRATEC_T3 0x10a0 +#define USB_PID_TERRATEC_T5 0x10a1 +#define USB_PID_NOXON_DAB_STICK 0x00b3 +#define USB_PID_NOXON_DAB_STICK_REV2 0x00e0 +#define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e +#define USB_PID_PINNACLE_PCTV2000E 0x022c +#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 +#define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229 +#define USB_PID_PINNACLE_PCTV71E 0x022b +#define USB_PID_PINNACLE_PCTV72E 0x0236 +#define USB_PID_PINNACLE_PCTV73E 0x0237 +#define USB_PID_PINNACLE_PCTV310E 0x3211 +#define USB_PID_PINNACLE_PCTV801E 0x023a +#define USB_PID_PINNACLE_PCTV801E_SE 0x023b +#define USB_PID_PINNACLE_PCTV340E 0x023d +#define USB_PID_PINNACLE_PCTV340E_SE 0x023e +#define USB_PID_PINNACLE_PCTV73A 0x0243 +#define USB_PID_PINNACLE_PCTV73ESE 0x0245 +#define USB_PID_PINNACLE_PCTV74E 0x0246 +#define USB_PID_PINNACLE_PCTV282E 0x0248 +#define USB_PID_PIXELVIEW_SBTVD 0x5010 +#define USB_PID_PCTV_200E 0x020e +#define USB_PID_PCTV_400E 0x020f +#define USB_PID_PCTV_450E 0x0222 +#define USB_PID_PCTV_452E 0x021f +#define USB_PID_REALTEK_RTL2831U 0x2831 +#define USB_PID_REALTEK_RTL2832U 0x2832 +#define USB_PID_TECHNOTREND_CONNECT_S2_3600 0x3007 +#define USB_PID_TECHNOTREND_CONNECT_S2_3650_CI 0x300a +#define USB_PID_NEBULA_DIGITV 0x0201 +#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820 +#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500 +#define USB_PID_DVICO_BLUEBIRD_LG064F_WARM 0xd501 +#define USB_PID_DVICO_BLUEBIRD_LGZ201_COLD 0xdb00 +#define USB_PID_DVICO_BLUEBIRD_LGZ201_WARM 0xdb01 +#define USB_PID_DVICO_BLUEBIRD_TH7579_COLD 0xdb10 +#define USB_PID_DVICO_BLUEBIRD_TH7579_WARM 0xdb11 +#define USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD 0xdb50 +#define USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM 0xdb51 +#define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD 0xdb58 +#define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM 0xdb59 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4 0xdb78 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2 0xdb98 +#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2 0xdb70 +#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM 0xdb71 +#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54 +#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM 0xdb55 +#define USB_PID_MEDION_MD95700 0x0932 +#define USB_PID_MSI_MEGASKY580 0x5580 +#define USB_PID_MSI_MEGASKY580_55801 0x5581 +#define USB_PID_KYE_DVB_T_COLD 0x701e +#define USB_PID_KYE_DVB_T_WARM 0x701f +#define USB_PID_LITEON_DVB_T_COLD 0xf000 +#define USB_PID_LITEON_DVB_T_WARM 0xf001 +#define USB_PID_DIGIVOX_MINI_SL_COLD 0xe360 +#define USB_PID_DIGIVOX_MINI_SL_WARM 0xe361 +#define USB_PID_GRANDTEC_DVBT_USB2_COLD 0x0bc6 +#define USB_PID_GRANDTEC_DVBT_USB2_WARM 0x0bc7 +#define USB_PID_WINFAST_DTV2000DS 0x6a04 +#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025 +#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 +#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 +#define USB_PID_WINFAST_DTV_DONGLE_H 0x60f6 +#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01 +#define USB_PID_WINFAST_DTV_DONGLE_GOLD 0x6029 +#define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 +#define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201 +#define USB_PID_GENPIX_8PSK_REV_2 0x0202 +#define USB_PID_GENPIX_SKYWALKER_1 0x0203 +#define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204 +#define USB_PID_GENPIX_SKYWALKER_2 0x0206 +#define USB_PID_SIGMATEK_DVB_110 0x6610 +#define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513 +#define USB_PID_MSI_DIGIVOX_DUO 0x8801 +#define USB_PID_OPERA1_COLD 0x2830 +#define USB_PID_OPERA1_WARM 0x3829 +#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 +#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513 +#define USB_PID_GIGABYTE_U7000 0x7001 +#define USB_PID_GIGABYTE_U8000 0x7002 +#define USB_PID_ASUS_U3000 0x171f +#define USB_PID_ASUS_U3000H 0x1736 +#define USB_PID_ASUS_U3100 0x173f +#define USB_PID_ASUS_U3100MINI_PLUS 0x1779 +#define USB_PID_YUAN_EC372S 0x1edc +#define USB_PID_YUAN_STK7700PH 0x1f08 +#define USB_PID_YUAN_PD378S 0x2edc +#define USB_PID_YUAN_MC770 0x0871 +#define USB_PID_YUAN_STK7700D 0x1efc +#define USB_PID_YUAN_STK7700D_2 0x1e8c +#define USB_PID_DW2102 0x2102 +#define USB_PID_XTENSIONS_XD_380 0x0381 +#define USB_PID_TELESTAR_STARSTICK_2 0x8000 +#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807 +#define USB_PID_SONY_PLAYTV 0x0003 +#define USB_PID_MYGICA_D689 0xd811 +#define USB_PID_ELGATO_EYETV_DIVERSITY 0x0011 +#define USB_PID_ELGATO_EYETV_DTT 0x0021 +#define USB_PID_ELGATO_EYETV_DTT_2 0x003f +#define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020 +#define USB_PID_ELGATO_EYETV_SAT 0x002a +#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000 +#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001 +#define USB_PID_FRIIO_WHITE 0x0001 +#define USB_PID_TVWAY_PLUS 0x0002 +#define USB_PID_SVEON_STV20 0xe39d +#define USB_PID_SVEON_STV22 0xe401 +#define USB_PID_SVEON_STV22_IT9137 0xe411 +#define USB_PID_AZUREWAVE_AZ6027 0x3275 +#define USB_PID_TERRATEC_DVBS2CI_V1 0x10a4 +#define USB_PID_TERRATEC_DVBS2CI_V2 0x10ac +#define USB_PID_TECHNISAT_USB2_HDCI_V1 0x0001 +#define USB_PID_TECHNISAT_USB2_HDCI_V2 0x0002 +#define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2 0x0004 +#define USB_PID_TECHNISAT_USB2_DVB_S2 0x0500 +#endif diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c new file mode 100644 index 00000000..0aac3096 --- /dev/null +++ b/drivers/media/dvb-core/dvb_ca_en50221.c @@ -0,0 +1,1765 @@ +/* + * dvb_ca.c: generic DVB functions for EN50221 CAM interfaces + * + * Copyright (C) 2004 Andrew de Quincey + * + * Parts of this file were based on sources as follows: + * + * Copyright (C) 2003 Ralph Metzler + * + * based on code: + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_ca_en50221.h" +#include "dvb_ringbuffer.h" + +static int dvb_ca_en50221_debug; + +module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644); +MODULE_PARM_DESC(cam_debug, "enable verbose debug messages"); + +#define dprintk if (dvb_ca_en50221_debug) printk + +#define INIT_TIMEOUT_SECS 10 + +#define HOST_LINK_BUF_SIZE 0x200 + +#define RX_BUFFER_SIZE 65535 + +#define MAX_RX_PACKETS_PER_ITERATION 10 + +#define CTRLIF_DATA 0 +#define CTRLIF_COMMAND 1 +#define CTRLIF_STATUS 1 +#define CTRLIF_SIZE_LOW 2 +#define CTRLIF_SIZE_HIGH 3 + +#define CMDREG_HC 1 /* Host control */ +#define CMDREG_SW 2 /* Size write */ +#define CMDREG_SR 4 /* Size read */ +#define CMDREG_RS 8 /* Reset interface */ +#define CMDREG_FRIE 0x40 /* Enable FR interrupt */ +#define CMDREG_DAIE 0x80 /* Enable DA interrupt */ +#define IRQEN (CMDREG_DAIE) + +#define STATUSREG_RE 1 /* read error */ +#define STATUSREG_WE 2 /* write error */ +#define STATUSREG_FR 0x40 /* module free */ +#define STATUSREG_DA 0x80 /* data available */ +#define STATUSREG_TXERR (STATUSREG_RE|STATUSREG_WE) /* general transfer error */ + + +#define DVB_CA_SLOTSTATE_NONE 0 +#define DVB_CA_SLOTSTATE_UNINITIALISED 1 +#define DVB_CA_SLOTSTATE_RUNNING 2 +#define DVB_CA_SLOTSTATE_INVALID 3 +#define DVB_CA_SLOTSTATE_WAITREADY 4 +#define DVB_CA_SLOTSTATE_VALIDATE 5 +#define DVB_CA_SLOTSTATE_WAITFR 6 +#define DVB_CA_SLOTSTATE_LINKINIT 7 + + +/* Information on a CA slot */ +struct dvb_ca_slot { + + /* current state of the CAM */ + int slot_state; + + /* mutex used for serializing access to one CI slot */ + struct mutex slot_lock; + + /* Number of CAMCHANGES that have occurred since last processing */ + atomic_t camchange_count; + + /* Type of last CAMCHANGE */ + int camchange_type; + + /* base address of CAM config */ + u32 config_base; + + /* value to write into Config Control register */ + u8 config_option; + + /* if 1, the CAM supports DA IRQs */ + u8 da_irq_supported:1; + + /* size of the buffer to use when talking to the CAM */ + int link_buf_size; + + /* buffer for incoming packets */ + struct dvb_ringbuffer rx_buffer; + + /* timer used during various states of the slot */ + unsigned long timeout; +}; + +/* Private CA-interface information */ +struct dvb_ca_private { + + /* pointer back to the public data structure */ + struct dvb_ca_en50221 *pub; + + /* the DVB device */ + struct dvb_device *dvbdev; + + /* Flags describing the interface (DVB_CA_FLAG_*) */ + u32 flags; + + /* number of slots supported by this CA interface */ + unsigned int slot_count; + + /* information on each slot */ + struct dvb_ca_slot *slot_info; + + /* wait queues for read() and write() operations */ + wait_queue_head_t wait_queue; + + /* PID of the monitoring thread */ + struct task_struct *thread; + + /* Flag indicating if the CA device is open */ + unsigned int open:1; + + /* Flag indicating the thread should wake up now */ + unsigned int wakeup:1; + + /* Delay the main thread should use */ + unsigned long delay; + + /* Slot to start looking for data to read from in the next user-space read operation */ + int next_read_slot; + + /* mutex serializing ioctls */ + struct mutex ioctl_mutex; +}; + +static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca); +static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount); +static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount); + + +/** + * Safely find needle in haystack. + * + * @param haystack Buffer to look in. + * @param hlen Number of bytes in haystack. + * @param needle Buffer to find. + * @param nlen Number of bytes in needle. + * @return Pointer into haystack needle was found at, or NULL if not found. + */ +static char *findstr(char * haystack, int hlen, char * needle, int nlen) +{ + int i; + + if (hlen < nlen) + return NULL; + + for (i = 0; i <= hlen - nlen; i++) { + if (!strncmp(haystack + i, needle, nlen)) + return haystack + i; + } + + return NULL; +} + + + +/* ******************************************************************************** */ +/* EN50221 physical interface functions */ + + +/** + * Check CAM status. + */ +static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot) +{ + int slot_status; + int cam_present_now; + int cam_changed; + + /* IRQ mode */ + if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) { + return (atomic_read(&ca->slot_info[slot].camchange_count) != 0); + } + + /* poll mode */ + slot_status = ca->pub->poll_slot_status(ca->pub, slot, ca->open); + + cam_present_now = (slot_status & DVB_CA_EN50221_POLL_CAM_PRESENT) ? 1 : 0; + cam_changed = (slot_status & DVB_CA_EN50221_POLL_CAM_CHANGED) ? 1 : 0; + if (!cam_changed) { + int cam_present_old = (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE); + cam_changed = (cam_present_now != cam_present_old); + } + + if (cam_changed) { + if (!cam_present_now) { + ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; + } else { + ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_INSERTED; + } + atomic_set(&ca->slot_info[slot].camchange_count, 1); + } else { + if ((ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) && + (slot_status & DVB_CA_EN50221_POLL_CAM_READY)) { + // move to validate state if reset is completed + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE; + } + } + + return cam_changed; +} + + +/** + * Wait for flags to become set on the STATUS register on a CAM interface, + * checking for errors and timeout. + * + * @param ca CA instance. + * @param slot Slot on interface. + * @param waitfor Flags to wait for. + * @param timeout_ms Timeout in milliseconds. + * + * @return 0 on success, nonzero on error. + */ +static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot, + u8 waitfor, int timeout_hz) +{ + unsigned long timeout; + unsigned long start; + + dprintk("%s\n", __func__); + + /* loop until timeout elapsed */ + start = jiffies; + timeout = jiffies + timeout_hz; + while (1) { + /* read the status and check for error */ + int res = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); + if (res < 0) + return -EIO; + + /* if we got the flags, it was successful! */ + if (res & waitfor) { + dprintk("%s succeeded timeout:%lu\n", __func__, jiffies - start); + return 0; + } + + /* check for timeout */ + if (time_after(jiffies, timeout)) { + break; + } + + /* wait for a bit */ + msleep(1); + } + + dprintk("%s failed timeout:%lu\n", __func__, jiffies - start); + + /* if we get here, we've timed out */ + return -ETIMEDOUT; +} + + +/** + * Initialise the link layer connection to a CAM. + * + * @param ca CA instance. + * @param slot Slot id. + * + * @return 0 on success, nonzero on failure. + */ +static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot) +{ + int ret; + int buf_size; + u8 buf[2]; + + dprintk("%s\n", __func__); + + /* we'll be determining these during this function */ + ca->slot_info[slot].da_irq_supported = 0; + + /* set the host link buffer size temporarily. it will be overwritten with the + * real negotiated size later. */ + ca->slot_info[slot].link_buf_size = 2; + + /* read the buffer size from the CAM */ + if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SR)) != 0) + return ret; + if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ / 10)) != 0) + return ret; + if ((ret = dvb_ca_en50221_read_data(ca, slot, buf, 2)) != 2) + return -EIO; + if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0) + return ret; + + /* store it, and choose the minimum of our buffer and the CAM's buffer size */ + buf_size = (buf[0] << 8) | buf[1]; + if (buf_size > HOST_LINK_BUF_SIZE) + buf_size = HOST_LINK_BUF_SIZE; + ca->slot_info[slot].link_buf_size = buf_size; + buf[0] = buf_size >> 8; + buf[1] = buf_size & 0xff; + dprintk("Chosen link buffer size of %i\n", buf_size); + + /* write the buffer size to the CAM */ + if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0) + return ret; + if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10)) != 0) + return ret; + if ((ret = dvb_ca_en50221_write_data(ca, slot, buf, 2)) != 2) + return -EIO; + if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0) + return ret; + + /* success */ + return 0; +} + +/** + * Read a tuple from attribute memory. + * + * @param ca CA instance. + * @param slot Slot id. + * @param address Address to read from. Updated. + * @param tupleType Tuple id byte. Updated. + * @param tupleLength Tuple length. Updated. + * @param tuple Dest buffer for tuple (must be 256 bytes). Updated. + * + * @return 0 on success, nonzero on error. + */ +static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot, + int *address, int *tupleType, int *tupleLength, u8 * tuple) +{ + int i; + int _tupleType; + int _tupleLength; + int _address = *address; + + /* grab the next tuple length and type */ + if ((_tupleType = ca->pub->read_attribute_mem(ca->pub, slot, _address)) < 0) + return _tupleType; + if (_tupleType == 0xff) { + dprintk("END OF CHAIN TUPLE type:0x%x\n", _tupleType); + *address += 2; + *tupleType = _tupleType; + *tupleLength = 0; + return 0; + } + if ((_tupleLength = ca->pub->read_attribute_mem(ca->pub, slot, _address + 2)) < 0) + return _tupleLength; + _address += 4; + + dprintk("TUPLE type:0x%x length:%i\n", _tupleType, _tupleLength); + + /* read in the whole tuple */ + for (i = 0; i < _tupleLength; i++) { + tuple[i] = ca->pub->read_attribute_mem(ca->pub, slot, _address + (i * 2)); + dprintk(" 0x%02x: 0x%02x %c\n", + i, tuple[i] & 0xff, + ((tuple[i] > 31) && (tuple[i] < 127)) ? tuple[i] : '.'); + } + _address += (_tupleLength * 2); + + // success + *tupleType = _tupleType; + *tupleLength = _tupleLength; + *address = _address; + return 0; +} + + +/** + * Parse attribute memory of a CAM module, extracting Config register, and checking + * it is a DVB CAM module. + * + * @param ca CA instance. + * @param slot Slot id. + * + * @return 0 on success, <0 on failure. + */ +static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot) +{ + int address = 0; + int tupleLength; + int tupleType; + u8 tuple[257]; + char *dvb_str; + int rasz; + int status; + int got_cftableentry = 0; + int end_chain = 0; + int i; + u16 manfid = 0; + u16 devid = 0; + + + // CISTPL_DEVICE_0A + if ((status = + dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) + return status; + if (tupleType != 0x1D) + return -EINVAL; + + + + // CISTPL_DEVICE_0C + if ((status = + dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) + return status; + if (tupleType != 0x1C) + return -EINVAL; + + + + // CISTPL_VERS_1 + if ((status = + dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) + return status; + if (tupleType != 0x15) + return -EINVAL; + + + + // CISTPL_MANFID + if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, + &tupleLength, tuple)) < 0) + return status; + if (tupleType != 0x20) + return -EINVAL; + if (tupleLength != 4) + return -EINVAL; + manfid = (tuple[1] << 8) | tuple[0]; + devid = (tuple[3] << 8) | tuple[2]; + + + + // CISTPL_CONFIG + if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, + &tupleLength, tuple)) < 0) + return status; + if (tupleType != 0x1A) + return -EINVAL; + if (tupleLength < 3) + return -EINVAL; + + /* extract the configbase */ + rasz = tuple[0] & 3; + if (tupleLength < (3 + rasz + 14)) + return -EINVAL; + ca->slot_info[slot].config_base = 0; + for (i = 0; i < rasz + 1; i++) { + ca->slot_info[slot].config_base |= (tuple[2 + i] << (8 * i)); + } + + /* check it contains the correct DVB string */ + dvb_str = findstr((char *)tuple, tupleLength, "DVB_CI_V", 8); + if (dvb_str == NULL) + return -EINVAL; + if (tupleLength < ((dvb_str - (char *) tuple) + 12)) + return -EINVAL; + + /* is it a version we support? */ + if (strncmp(dvb_str + 8, "1.00", 4)) { + printk("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n", + ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9], dvb_str[10], dvb_str[11]); + return -EINVAL; + } + + /* process the CFTABLE_ENTRY tuples, and any after those */ + while ((!end_chain) && (address < 0x1000)) { + if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, + &tupleLength, tuple)) < 0) + return status; + switch (tupleType) { + case 0x1B: // CISTPL_CFTABLE_ENTRY + if (tupleLength < (2 + 11 + 17)) + break; + + /* if we've already parsed one, just use it */ + if (got_cftableentry) + break; + + /* get the config option */ + ca->slot_info[slot].config_option = tuple[0] & 0x3f; + + /* OK, check it contains the correct strings */ + if ((findstr((char *)tuple, tupleLength, "DVB_HOST", 8) == NULL) || + (findstr((char *)tuple, tupleLength, "DVB_CI_MODULE", 13) == NULL)) + break; + + got_cftableentry = 1; + break; + + case 0x14: // CISTPL_NO_LINK + break; + + case 0xFF: // CISTPL_END + end_chain = 1; + break; + + default: /* Unknown tuple type - just skip this tuple and move to the next one */ + dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n", tupleType, + tupleLength); + break; + } + } + + if ((address > 0x1000) || (!got_cftableentry)) + return -EINVAL; + + dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n", + manfid, devid, ca->slot_info[slot].config_base, ca->slot_info[slot].config_option); + + // success! + return 0; +} + + +/** + * Set CAM's configoption correctly. + * + * @param ca CA instance. + * @param slot Slot containing the CAM. + */ +static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot) +{ + int configoption; + + dprintk("%s\n", __func__); + + /* set the config option */ + ca->pub->write_attribute_mem(ca->pub, slot, + ca->slot_info[slot].config_base, + ca->slot_info[slot].config_option); + + /* check it */ + configoption = ca->pub->read_attribute_mem(ca->pub, slot, ca->slot_info[slot].config_base); + dprintk("Set configoption 0x%x, read configoption 0x%x\n", + ca->slot_info[slot].config_option, configoption & 0x3f); + + /* fine! */ + return 0; + +} + + +/** + * This function talks to an EN50221 CAM control interface. It reads a buffer of + * data from the CAM. The data can either be stored in a supplied buffer, or + * automatically be added to the slot's rx_buffer. + * + * @param ca CA instance. + * @param slot Slot to read from. + * @param ebuf If non-NULL, the data will be written to this buffer. If NULL, + * the data will be added into the buffering system as a normal fragment. + * @param ecount Size of ebuf. Ignored if ebuf is NULL. + * + * @return Number of bytes read, or < 0 on error + */ +static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount) +{ + int bytes_read; + int status; + u8 buf[HOST_LINK_BUF_SIZE]; + int i; + + dprintk("%s\n", __func__); + + /* check if we have space for a link buf in the rx_buffer */ + if (ebuf == NULL) { + int buf_free; + + if (ca->slot_info[slot].rx_buffer.data == NULL) { + status = -EIO; + goto exit; + } + buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer); + + if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) { + status = -EAGAIN; + goto exit; + } + } + + /* check if there is data available */ + if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) + goto exit; + if (!(status & STATUSREG_DA)) { + /* no data */ + status = 0; + goto exit; + } + + /* read the amount of data */ + if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH)) < 0) + goto exit; + bytes_read = status << 8; + if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW)) < 0) + goto exit; + bytes_read |= status; + + /* check it will fit */ + if (ebuf == NULL) { + if (bytes_read > ca->slot_info[slot].link_buf_size) { + printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n", + ca->dvbdev->adapter->num, bytes_read, ca->slot_info[slot].link_buf_size); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; + status = -EIO; + goto exit; + } + if (bytes_read < 2) { + printk("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n", + ca->dvbdev->adapter->num); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; + status = -EIO; + goto exit; + } + } else { + if (bytes_read > ecount) { + printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n", + ca->dvbdev->adapter->num); + status = -EIO; + goto exit; + } + } + + /* fill the buffer */ + for (i = 0; i < bytes_read; i++) { + /* read byte and check */ + if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_DATA)) < 0) + goto exit; + + /* OK, store it in the buffer */ + buf[i] = status; + } + + /* check for read error (RE should now be 0) */ + if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) + goto exit; + if (status & STATUSREG_RE) { + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; + status = -EIO; + goto exit; + } + + /* OK, add it to the receive buffer, or copy into external buffer if supplied */ + if (ebuf == NULL) { + if (ca->slot_info[slot].rx_buffer.data == NULL) { + status = -EIO; + goto exit; + } + dvb_ringbuffer_pkt_write(&ca->slot_info[slot].rx_buffer, buf, bytes_read); + } else { + memcpy(ebuf, buf, bytes_read); + } + + dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot, + buf[0], (buf[1] & 0x80) == 0, bytes_read); + + /* wake up readers when a last_fragment is received */ + if ((buf[1] & 0x80) == 0x00) { + wake_up_interruptible(&ca->wait_queue); + } + status = bytes_read; + +exit: + return status; +} + + +/** + * This function talks to an EN50221 CAM control interface. It writes a buffer of data + * to a CAM. + * + * @param ca CA instance. + * @param slot Slot to write to. + * @param ebuf The data in this buffer is treated as a complete link-level packet to + * be written. + * @param count Size of ebuf. + * + * @return Number of bytes written, or < 0 on error. + */ +static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * buf, int bytes_write) +{ + int status; + int i; + + dprintk("%s\n", __func__); + + + /* sanity check */ + if (bytes_write > ca->slot_info[slot].link_buf_size) + return -EINVAL; + + /* it is possible we are dealing with a single buffer implementation, + thus if there is data available for read or if there is even a read + already in progress, we do nothing but awake the kernel thread to + process the data if necessary. */ + if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) + goto exitnowrite; + if (status & (STATUSREG_DA | STATUSREG_RE)) { + if (status & STATUSREG_DA) + dvb_ca_en50221_thread_wakeup(ca); + + status = -EAGAIN; + goto exitnowrite; + } + + /* OK, set HC bit */ + if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, + IRQEN | CMDREG_HC)) != 0) + goto exit; + + /* check if interface is still free */ + if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) + goto exit; + if (!(status & STATUSREG_FR)) { + /* it wasn't free => try again later */ + status = -EAGAIN; + goto exit; + } + + /* send the amount of data */ + if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0) + goto exit; + if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW, + bytes_write & 0xff)) != 0) + goto exit; + + /* send the buffer */ + for (i = 0; i < bytes_write; i++) { + if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_DATA, buf[i])) != 0) + goto exit; + } + + /* check for write error (WE should now be 0) */ + if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) + goto exit; + if (status & STATUSREG_WE) { + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; + status = -EIO; + goto exit; + } + status = bytes_write; + + dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot, + buf[0], (buf[1] & 0x80) == 0, bytes_write); + +exit: + ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN); + +exitnowrite: + return status; +} +EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq); + + + +/* ******************************************************************************** */ +/* EN50221 higher level functions */ + + +/** + * A CAM has been removed => shut it down. + * + * @param ca CA instance. + * @param slot Slot to shut down. + */ +static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot) +{ + dprintk("%s\n", __func__); + + ca->pub->slot_shutdown(ca->pub, slot); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; + + /* need to wake up all processes to check if they're now + trying to write to a defunct CAM */ + wake_up_interruptible(&ca->wait_queue); + + dprintk("Slot %i shutdown\n", slot); + + /* success */ + return 0; +} +EXPORT_SYMBOL(dvb_ca_en50221_camready_irq); + + +/** + * A CAMCHANGE IRQ has occurred. + * + * @param ca CA instance. + * @param slot Slot concerned. + * @param change_type One of the DVB_CA_CAMCHANGE_* values. + */ +void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type) +{ + struct dvb_ca_private *ca = pubca->private; + + dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type); + + switch (change_type) { + case DVB_CA_EN50221_CAMCHANGE_REMOVED: + case DVB_CA_EN50221_CAMCHANGE_INSERTED: + break; + + default: + return; + } + + ca->slot_info[slot].camchange_type = change_type; + atomic_inc(&ca->slot_info[slot].camchange_count); + dvb_ca_en50221_thread_wakeup(ca); +} +EXPORT_SYMBOL(dvb_ca_en50221_frda_irq); + + +/** + * A CAMREADY IRQ has occurred. + * + * @param ca CA instance. + * @param slot Slot concerned. + */ +void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot) +{ + struct dvb_ca_private *ca = pubca->private; + + dprintk("CAMREADY IRQ slot:%i\n", slot); + + if (ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) { + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE; + dvb_ca_en50221_thread_wakeup(ca); + } +} + + +/** + * An FR or DA IRQ has occurred. + * + * @param ca CA instance. + * @param slot Slot concerned. + */ +void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot) +{ + struct dvb_ca_private *ca = pubca->private; + int flags; + + dprintk("FR/DA IRQ slot:%i\n", slot); + + switch (ca->slot_info[slot].slot_state) { + case DVB_CA_SLOTSTATE_LINKINIT: + flags = ca->pub->read_cam_control(pubca, slot, CTRLIF_STATUS); + if (flags & STATUSREG_DA) { + dprintk("CAM supports DA IRQ\n"); + ca->slot_info[slot].da_irq_supported = 1; + } + break; + + case DVB_CA_SLOTSTATE_RUNNING: + if (ca->open) + dvb_ca_en50221_thread_wakeup(ca); + break; + } +} + + + +/* ******************************************************************************** */ +/* EN50221 thread functions */ + +/** + * Wake up the DVB CA thread + * + * @param ca CA instance. + */ +static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca) +{ + + dprintk("%s\n", __func__); + + ca->wakeup = 1; + mb(); + wake_up_process(ca->thread); +} + +/** + * Update the delay used by the thread. + * + * @param ca CA instance. + */ +static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca) +{ + int delay; + int curdelay = 100000000; + int slot; + + /* Beware of too high polling frequency, because one polling + * call might take several hundred milliseconds until timeout! + */ + for (slot = 0; slot < ca->slot_count; slot++) { + switch (ca->slot_info[slot].slot_state) { + default: + case DVB_CA_SLOTSTATE_NONE: + delay = HZ * 60; /* 60s */ + if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) + delay = HZ * 5; /* 5s */ + break; + case DVB_CA_SLOTSTATE_INVALID: + delay = HZ * 60; /* 60s */ + if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) + delay = HZ / 10; /* 100ms */ + break; + + case DVB_CA_SLOTSTATE_UNINITIALISED: + case DVB_CA_SLOTSTATE_WAITREADY: + case DVB_CA_SLOTSTATE_VALIDATE: + case DVB_CA_SLOTSTATE_WAITFR: + case DVB_CA_SLOTSTATE_LINKINIT: + delay = HZ / 10; /* 100ms */ + break; + + case DVB_CA_SLOTSTATE_RUNNING: + delay = HZ * 60; /* 60s */ + if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) + delay = HZ / 10; /* 100ms */ + if (ca->open) { + if ((!ca->slot_info[slot].da_irq_supported) || + (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA))) + delay = HZ / 10; /* 100ms */ + } + break; + } + + if (delay < curdelay) + curdelay = delay; + } + + ca->delay = curdelay; +} + + + +/** + * Kernel thread which monitors CA slots for CAM changes, and performs data transfers. + */ +static int dvb_ca_en50221_thread(void *data) +{ + struct dvb_ca_private *ca = data; + int slot; + int flags; + int status; + int pktcount; + void *rxbuf; + + dprintk("%s\n", __func__); + + /* choose the correct initial delay */ + dvb_ca_en50221_thread_update_delay(ca); + + /* main loop */ + while (!kthread_should_stop()) { + /* sleep for a bit */ + if (!ca->wakeup) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(ca->delay); + if (kthread_should_stop()) + return 0; + } + ca->wakeup = 0; + + /* go through all the slots processing them */ + for (slot = 0; slot < ca->slot_count; slot++) { + + mutex_lock(&ca->slot_info[slot].slot_lock); + + // check the cam status + deal with CAMCHANGEs + while (dvb_ca_en50221_check_camstatus(ca, slot)) { + /* clear down an old CI slot if necessary */ + if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) + dvb_ca_en50221_slot_shutdown(ca, slot); + + /* if a CAM is NOW present, initialise it */ + if (ca->slot_info[slot].camchange_type == DVB_CA_EN50221_CAMCHANGE_INSERTED) { + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_UNINITIALISED; + } + + /* we've handled one CAMCHANGE */ + dvb_ca_en50221_thread_update_delay(ca); + atomic_dec(&ca->slot_info[slot].camchange_count); + } + + // CAM state machine + switch (ca->slot_info[slot].slot_state) { + case DVB_CA_SLOTSTATE_NONE: + case DVB_CA_SLOTSTATE_INVALID: + // no action needed + break; + + case DVB_CA_SLOTSTATE_UNINITIALISED: + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITREADY; + ca->pub->slot_reset(ca->pub, slot); + ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ); + break; + + case DVB_CA_SLOTSTATE_WAITREADY: + if (time_after(jiffies, ca->slot_info[slot].timeout)) { + printk("dvb_ca adaptor %d: PC card did not respond :(\n", + ca->dvbdev->adapter->num); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + // no other action needed; will automatically change state when ready + break; + + case DVB_CA_SLOTSTATE_VALIDATE: + if (dvb_ca_en50221_parse_attributes(ca, slot) != 0) { + /* we need this extra check for annoying interfaces like the budget-av */ + if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && + (ca->pub->poll_slot_status)) { + status = ca->pub->poll_slot_status(ca->pub, slot, 0); + if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) { + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + } + + printk("dvb_ca adapter %d: Invalid PC card inserted :(\n", + ca->dvbdev->adapter->num); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + if (dvb_ca_en50221_set_configoption(ca, slot) != 0) { + printk("dvb_ca adapter %d: Unable to initialise CAM :(\n", + ca->dvbdev->adapter->num); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + if (ca->pub->write_cam_control(ca->pub, slot, + CTRLIF_COMMAND, CMDREG_RS) != 0) { + printk("dvb_ca adapter %d: Unable to reset CAM IF\n", + ca->dvbdev->adapter->num); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + dprintk("DVB CAM validated successfully\n"); + + ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITFR; + ca->wakeup = 1; + break; + + case DVB_CA_SLOTSTATE_WAITFR: + if (time_after(jiffies, ca->slot_info[slot].timeout)) { + printk("dvb_ca adapter %d: DVB CAM did not respond :(\n", + ca->dvbdev->adapter->num); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + + flags = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); + if (flags & STATUSREG_FR) { + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; + ca->wakeup = 1; + } + break; + + case DVB_CA_SLOTSTATE_LINKINIT: + if (dvb_ca_en50221_link_init(ca, slot) != 0) { + /* we need this extra check for annoying interfaces like the budget-av */ + if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && + (ca->pub->poll_slot_status)) { + status = ca->pub->poll_slot_status(ca->pub, slot, 0); + if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) { + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + } + + printk("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", ca->dvbdev->adapter->num); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + + if (ca->slot_info[slot].rx_buffer.data == NULL) { + rxbuf = vmalloc(RX_BUFFER_SIZE); + if (rxbuf == NULL) { + printk("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", ca->dvbdev->adapter->num); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; + dvb_ca_en50221_thread_update_delay(ca); + break; + } + dvb_ringbuffer_init(&ca->slot_info[slot].rx_buffer, rxbuf, RX_BUFFER_SIZE); + } + + ca->pub->slot_ts_enable(ca->pub, slot); + ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_RUNNING; + dvb_ca_en50221_thread_update_delay(ca); + printk("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n", ca->dvbdev->adapter->num); + break; + + case DVB_CA_SLOTSTATE_RUNNING: + if (!ca->open) + break; + + // poll slots for data + pktcount = 0; + while ((status = dvb_ca_en50221_read_data(ca, slot, NULL, 0)) > 0) { + if (!ca->open) + break; + + /* if a CAMCHANGE occurred at some point, do not do any more processing of this slot */ + if (dvb_ca_en50221_check_camstatus(ca, slot)) { + // we dont want to sleep on the next iteration so we can handle the cam change + ca->wakeup = 1; + break; + } + + /* check if we've hit our limit this time */ + if (++pktcount >= MAX_RX_PACKETS_PER_ITERATION) { + // dont sleep; there is likely to be more data to read + ca->wakeup = 1; + break; + } + } + break; + } + + mutex_unlock(&ca->slot_info[slot].slot_lock); + } + } + + return 0; +} + + + +/* ******************************************************************************** */ +/* EN50221 IO interface functions */ + +/** + * Real ioctl implementation. + * NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them. + * + * @param inode Inode concerned. + * @param file File concerned. + * @param cmd IOCTL command. + * @param arg Associated argument. + * + * @return 0 on success, <0 on error. + */ +static int dvb_ca_en50221_io_do_ioctl(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; + int err = 0; + int slot; + + dprintk("%s\n", __func__); + + if (mutex_lock_interruptible(&ca->ioctl_mutex)) + return -ERESTARTSYS; + + switch (cmd) { + case CA_RESET: + for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); + if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) { + dvb_ca_en50221_slot_shutdown(ca, slot); + if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) + dvb_ca_en50221_camchange_irq(ca->pub, + slot, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + } + mutex_unlock(&ca->slot_info[slot].slot_lock); + } + ca->next_read_slot = 0; + dvb_ca_en50221_thread_wakeup(ca); + break; + + case CA_GET_CAP: { + struct ca_caps *caps = parg; + + caps->slot_num = ca->slot_count; + caps->slot_type = CA_CI_LINK; + caps->descr_num = 0; + caps->descr_type = 0; + break; + } + + case CA_GET_SLOT_INFO: { + struct ca_slot_info *info = parg; + + if ((info->num > ca->slot_count) || (info->num < 0)) { + err = -EINVAL; + goto out_unlock; + } + + info->type = CA_CI_LINK; + info->flags = 0; + if ((ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_NONE) + && (ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_INVALID)) { + info->flags = CA_CI_MODULE_PRESENT; + } + if (ca->slot_info[info->num].slot_state == DVB_CA_SLOTSTATE_RUNNING) { + info->flags |= CA_CI_MODULE_READY; + } + break; + } + + default: + err = -EINVAL; + break; + } + +out_unlock: + mutex_unlock(&ca->ioctl_mutex); + return err; +} + + +/** + * Wrapper for ioctl implementation. + * + * @param inode Inode concerned. + * @param file File concerned. + * @param cmd IOCTL command. + * @param arg Associated argument. + * + * @return 0 on success, <0 on error. + */ +static long dvb_ca_en50221_io_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + return dvb_usercopy(file, cmd, arg, dvb_ca_en50221_io_do_ioctl); +} + + +/** + * Implementation of write() syscall. + * + * @param file File structure. + * @param buf Source buffer. + * @param count Size of source buffer. + * @param ppos Position in file (ignored). + * + * @return Number of bytes read, or <0 on error. + */ +static ssize_t dvb_ca_en50221_io_write(struct file *file, + const char __user * buf, size_t count, loff_t * ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; + u8 slot, connection_id; + int status; + u8 fragbuf[HOST_LINK_BUF_SIZE]; + int fragpos = 0; + int fraglen; + unsigned long timeout; + int written; + + dprintk("%s\n", __func__); + + /* Incoming packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */ + if (count < 2) + return -EINVAL; + + /* extract slot & connection id */ + if (copy_from_user(&slot, buf, 1)) + return -EFAULT; + if (copy_from_user(&connection_id, buf + 1, 1)) + return -EFAULT; + buf += 2; + count -= 2; + + /* check if the slot is actually running */ + if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) + return -EINVAL; + + /* fragment the packets & store in the buffer */ + while (fragpos < count) { + fraglen = ca->slot_info[slot].link_buf_size - 2; + if (fraglen < 0) + break; + if (fraglen > HOST_LINK_BUF_SIZE - 2) + fraglen = HOST_LINK_BUF_SIZE - 2; + if ((count - fragpos) < fraglen) + fraglen = count - fragpos; + + fragbuf[0] = connection_id; + fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00; + status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen); + if (status) { + status = -EFAULT; + goto exit; + } + + timeout = jiffies + HZ / 2; + written = 0; + while (!time_after(jiffies, timeout)) { + /* check the CAM hasn't been removed/reset in the meantime */ + if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) { + status = -EIO; + goto exit; + } + + mutex_lock(&ca->slot_info[slot].slot_lock); + status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2); + mutex_unlock(&ca->slot_info[slot].slot_lock); + if (status == (fraglen + 2)) { + written = 1; + break; + } + if (status != -EAGAIN) + goto exit; + + msleep(1); + } + if (!written) { + status = -EIO; + goto exit; + } + + fragpos += fraglen; + } + status = count + 2; + +exit: + return status; +} + + +/** + * Condition for waking up in dvb_ca_en50221_io_read_condition + */ +static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca, + int *result, int *_slot) +{ + int slot; + int slot_count = 0; + int idx; + size_t fraglen; + int connection_id = -1; + int found = 0; + u8 hdr[2]; + + slot = ca->next_read_slot; + while ((slot_count < ca->slot_count) && (!found)) { + if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) + goto nextslot; + + if (ca->slot_info[slot].rx_buffer.data == NULL) { + return 0; + } + + idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen); + while (idx != -1) { + dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2); + if (connection_id == -1) + connection_id = hdr[0]; + if ((hdr[0] == connection_id) && ((hdr[1] & 0x80) == 0)) { + *_slot = slot; + found = 1; + break; + } + + idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen); + } + +nextslot: + slot = (slot + 1) % ca->slot_count; + slot_count++; + } + + ca->next_read_slot = slot; + return found; +} + + +/** + * Implementation of read() syscall. + * + * @param file File structure. + * @param buf Destination buffer. + * @param count Size of destination buffer. + * @param ppos Position in file (ignored). + * + * @return Number of bytes read, or <0 on error. + */ +static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf, + size_t count, loff_t * ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; + int status; + int result = 0; + u8 hdr[2]; + int slot; + int connection_id = -1; + size_t idx, idx2; + int last_fragment = 0; + size_t fraglen; + int pktlen; + int dispose = 0; + + dprintk("%s\n", __func__); + + /* Outgoing packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */ + if (count < 2) + return -EINVAL; + + /* wait for some data */ + if ((status = dvb_ca_en50221_io_read_condition(ca, &result, &slot)) == 0) { + + /* if we're in nonblocking mode, exit immediately */ + if (file->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + + /* wait for some data */ + status = wait_event_interruptible(ca->wait_queue, + dvb_ca_en50221_io_read_condition + (ca, &result, &slot)); + } + if ((status < 0) || (result < 0)) { + if (result) + return result; + return status; + } + + idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen); + pktlen = 2; + do { + if (idx == -1) { + printk("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", ca->dvbdev->adapter->num); + status = -EIO; + goto exit; + } + + dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2); + if (connection_id == -1) + connection_id = hdr[0]; + if (hdr[0] == connection_id) { + if (pktlen < count) { + if ((pktlen + fraglen - 2) > count) { + fraglen = count - pktlen; + } else { + fraglen -= 2; + } + + if ((status = dvb_ringbuffer_pkt_read_user(&ca->slot_info[slot].rx_buffer, idx, 2, + buf + pktlen, fraglen)) < 0) { + goto exit; + } + pktlen += fraglen; + } + + if ((hdr[1] & 0x80) == 0) + last_fragment = 1; + dispose = 1; + } + + idx2 = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen); + if (dispose) + dvb_ringbuffer_pkt_dispose(&ca->slot_info[slot].rx_buffer, idx); + idx = idx2; + dispose = 0; + } while (!last_fragment); + + hdr[0] = slot; + hdr[1] = connection_id; + status = copy_to_user(buf, hdr, 2); + if (status) { + status = -EFAULT; + goto exit; + } + status = pktlen; + +exit: + return status; +} + + +/** + * Implementation of file open syscall. + * + * @param inode Inode concerned. + * @param file File concerned. + * + * @return 0 on success, <0 on failure. + */ +static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; + int err; + int i; + + dprintk("%s\n", __func__); + + if (!try_module_get(ca->pub->owner)) + return -EIO; + + err = dvb_generic_open(inode, file); + if (err < 0) { + module_put(ca->pub->owner); + return err; + } + + for (i = 0; i < ca->slot_count; i++) { + + if (ca->slot_info[i].slot_state == DVB_CA_SLOTSTATE_RUNNING) { + if (ca->slot_info[i].rx_buffer.data != NULL) { + /* it is safe to call this here without locks because + * ca->open == 0. Data is not read in this case */ + dvb_ringbuffer_flush(&ca->slot_info[i].rx_buffer); + } + } + } + + ca->open = 1; + dvb_ca_en50221_thread_update_delay(ca); + dvb_ca_en50221_thread_wakeup(ca); + + return 0; +} + + +/** + * Implementation of file close syscall. + * + * @param inode Inode concerned. + * @param file File concerned. + * + * @return 0 on success, <0 on failure. + */ +static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; + int err; + + dprintk("%s\n", __func__); + + /* mark the CA device as closed */ + ca->open = 0; + dvb_ca_en50221_thread_update_delay(ca); + + err = dvb_generic_release(inode, file); + + module_put(ca->pub->owner); + + return err; +} + + +/** + * Implementation of poll() syscall. + * + * @param file File concerned. + * @param wait poll wait table. + * + * @return Standard poll mask. + */ +static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; + unsigned int mask = 0; + int slot; + int result = 0; + + dprintk("%s\n", __func__); + + if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) { + mask |= POLLIN; + } + + /* if there is something, return now */ + if (mask) + return mask; + + /* wait for something to happen */ + poll_wait(file, &ca->wait_queue, wait); + + if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) { + mask |= POLLIN; + } + + return mask; +} +EXPORT_SYMBOL(dvb_ca_en50221_init); + + +static const struct file_operations dvb_ca_fops = { + .owner = THIS_MODULE, + .read = dvb_ca_en50221_io_read, + .write = dvb_ca_en50221_io_write, + .unlocked_ioctl = dvb_ca_en50221_io_ioctl, + .open = dvb_ca_en50221_io_open, + .release = dvb_ca_en50221_io_release, + .poll = dvb_ca_en50221_io_poll, + .llseek = noop_llseek, +}; + +static struct dvb_device dvbdev_ca = { + .priv = NULL, + .users = 1, + .readers = 1, + .writers = 1, + .fops = &dvb_ca_fops, +}; + + +/* ******************************************************************************** */ +/* Initialisation/shutdown functions */ + + +/** + * Initialise a new DVB CA EN50221 interface device. + * + * @param dvb_adapter DVB adapter to attach the new CA device to. + * @param ca The dvb_ca instance. + * @param flags Flags describing the CA device (DVB_CA_FLAG_*). + * @param slot_count Number of slots supported. + * + * @return 0 on success, nonzero on failure + */ +int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, + struct dvb_ca_en50221 *pubca, int flags, int slot_count) +{ + int ret; + struct dvb_ca_private *ca = NULL; + int i; + + dprintk("%s\n", __func__); + + if (slot_count < 1) + return -EINVAL; + + /* initialise the system data */ + if ((ca = kzalloc(sizeof(struct dvb_ca_private), GFP_KERNEL)) == NULL) { + ret = -ENOMEM; + goto error; + } + ca->pub = pubca; + ca->flags = flags; + ca->slot_count = slot_count; + if ((ca->slot_info = kcalloc(slot_count, sizeof(struct dvb_ca_slot), GFP_KERNEL)) == NULL) { + ret = -ENOMEM; + goto error; + } + init_waitqueue_head(&ca->wait_queue); + ca->open = 0; + ca->wakeup = 0; + ca->next_read_slot = 0; + pubca->private = ca; + + /* register the DVB device */ + ret = dvb_register_device(dvb_adapter, &ca->dvbdev, &dvbdev_ca, ca, DVB_DEVICE_CA); + if (ret) + goto error; + + /* now initialise each slot */ + for (i = 0; i < slot_count; i++) { + memset(&ca->slot_info[i], 0, sizeof(struct dvb_ca_slot)); + ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE; + atomic_set(&ca->slot_info[i].camchange_count, 0); + ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; + mutex_init(&ca->slot_info[i].slot_lock); + } + + mutex_init(&ca->ioctl_mutex); + + if (signal_pending(current)) { + ret = -EINTR; + goto error; + } + mb(); + + /* create a kthread for monitoring this CA device */ + ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i", + ca->dvbdev->adapter->num, ca->dvbdev->id); + if (IS_ERR(ca->thread)) { + ret = PTR_ERR(ca->thread); + printk("dvb_ca_init: failed to start kernel_thread (%d)\n", + ret); + goto error; + } + return 0; + +error: + if (ca != NULL) { + if (ca->dvbdev != NULL) + dvb_unregister_device(ca->dvbdev); + kfree(ca->slot_info); + kfree(ca); + } + pubca->private = NULL; + return ret; +} +EXPORT_SYMBOL(dvb_ca_en50221_release); + + + +/** + * Release a DVB CA EN50221 interface device. + * + * @param ca_dev The dvb_device_t instance for the CA device. + * @param ca The associated dvb_ca instance. + */ +void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca) +{ + struct dvb_ca_private *ca = pubca->private; + int i; + + dprintk("%s\n", __func__); + + /* shutdown the thread if there was one */ + kthread_stop(ca->thread); + + for (i = 0; i < ca->slot_count; i++) { + dvb_ca_en50221_slot_shutdown(ca, i); + vfree(ca->slot_info[i].rx_buffer.data); + } + kfree(ca->slot_info); + dvb_unregister_device(ca->dvbdev); + kfree(ca); + pubca->private = NULL; +} diff --git a/drivers/media/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb-core/dvb_ca_en50221.h new file mode 100644 index 00000000..7df2e141 --- /dev/null +++ b/drivers/media/dvb-core/dvb_ca_en50221.h @@ -0,0 +1,136 @@ +/* + * dvb_ca.h: generic DVB functions for EN50221 CA interfaces + * + * Copyright (C) 2004 Andrew de Quincey + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DVB_CA_EN50221_H_ +#define _DVB_CA_EN50221_H_ + +#include +#include + +#include "dvbdev.h" + +#define DVB_CA_EN50221_POLL_CAM_PRESENT 1 +#define DVB_CA_EN50221_POLL_CAM_CHANGED 2 +#define DVB_CA_EN50221_POLL_CAM_READY 4 + +#define DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE 1 +#define DVB_CA_EN50221_FLAG_IRQ_FR 2 +#define DVB_CA_EN50221_FLAG_IRQ_DA 4 + +#define DVB_CA_EN50221_CAMCHANGE_REMOVED 0 +#define DVB_CA_EN50221_CAMCHANGE_INSERTED 1 + + + +/* Structure describing a CA interface */ +struct dvb_ca_en50221 { + + /* the module owning this structure */ + struct module* owner; + + /* NOTE: the read_*, write_* and poll_slot_status functions will be + * called for different slots concurrently and need to use locks where + * and if appropriate. There will be no concurrent access to one slot. + */ + + /* functions for accessing attribute memory on the CAM */ + int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address); + int (*write_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address, u8 value); + + /* functions for accessing the control interface on the CAM */ + int (*read_cam_control)(struct dvb_ca_en50221* ca, int slot, u8 address); + int (*write_cam_control)(struct dvb_ca_en50221* ca, int slot, u8 address, u8 value); + + /* Functions for controlling slots */ + int (*slot_reset)(struct dvb_ca_en50221* ca, int slot); + int (*slot_shutdown)(struct dvb_ca_en50221* ca, int slot); + int (*slot_ts_enable)(struct dvb_ca_en50221* ca, int slot); + + /* + * Poll slot status. + * Only necessary if DVB_CA_FLAG_EN50221_IRQ_CAMCHANGE is not set + */ + int (*poll_slot_status)(struct dvb_ca_en50221* ca, int slot, int open); + + /* private data, used by caller */ + void* data; + + /* Opaque data used by the dvb_ca core. Do not modify! */ + void* private; +}; + + + + +/* ******************************************************************************** */ +/* Functions for reporting IRQ events */ + +/** + * A CAMCHANGE IRQ has occurred. + * + * @param ca CA instance. + * @param slot Slot concerned. + * @param change_type One of the DVB_CA_CAMCHANGE_* values + */ +void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221* pubca, int slot, int change_type); + +/** + * A CAMREADY IRQ has occurred. + * + * @param ca CA instance. + * @param slot Slot concerned. + */ +void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221* pubca, int slot); + +/** + * An FR or a DA IRQ has occurred. + * + * @param ca CA instance. + * @param slot Slot concerned. + */ +void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221* ca, int slot); + + + +/* ******************************************************************************** */ +/* Initialisation/shutdown functions */ + +/** + * Initialise a new DVB CA device. + * + * @param dvb_adapter DVB adapter to attach the new CA device to. + * @param ca The dvb_ca instance. + * @param flags Flags describing the CA device (DVB_CA_EN50221_FLAG_*). + * @param slot_count Number of slots supported. + * + * @return 0 on success, nonzero on failure + */ +extern int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, struct dvb_ca_en50221* ca, int flags, int slot_count); + +/** + * Release a DVB CA device. + * + * @param ca The associated dvb_ca instance. + */ +extern void dvb_ca_en50221_release(struct dvb_ca_en50221* ca); + + + +#endif diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c new file mode 100644 index 00000000..3485655f --- /dev/null +++ b/drivers/media/dvb-core/dvb_demux.c @@ -0,0 +1,1320 @@ +/* + * dvb_demux.c - DVB kernel demux API + * + * Copyright (C) 2000-2001 Ralph Metzler + * & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_demux.h" + +#define NOBUFS +/* +** #define DVB_DEMUX_SECTION_LOSS_LOG to monitor payload loss in the syslog +*/ +// #define DVB_DEMUX_SECTION_LOSS_LOG + +static int dvb_demux_tscheck; +module_param(dvb_demux_tscheck, int, 0644); +MODULE_PARM_DESC(dvb_demux_tscheck, + "enable transport stream continuity and TEI check"); + +static int dvb_demux_speedcheck; +module_param(dvb_demux_speedcheck, int, 0644); +MODULE_PARM_DESC(dvb_demux_speedcheck, + "enable transport stream speed check"); + +static int dvb_demux_feed_err_pkts = 1; +module_param(dvb_demux_feed_err_pkts, int, 0644); +MODULE_PARM_DESC(dvb_demux_feed_err_pkts, + "when set to 0, drop packets with the TEI bit set (1 by default)"); + +#define dprintk_tscheck(x...) do { \ + if (dvb_demux_tscheck && printk_ratelimit()) \ + printk(x); \ + } while (0) + +/****************************************************************************** + * static inlined helper functions + ******************************************************************************/ + +static inline u16 section_length(const u8 *buf) +{ + return 3 + ((buf[1] & 0x0f) << 8) + buf[2]; +} + +static inline u16 ts_pid(const u8 *buf) +{ + return ((buf[1] & 0x1f) << 8) + buf[2]; +} + +static inline u8 payload(const u8 *tsp) +{ + if (!(tsp[3] & 0x10)) // no payload? + return 0; + + if (tsp[3] & 0x20) { // adaptation field? + if (tsp[4] > 183) // corrupted data? + return 0; + else + return 184 - 1 - tsp[4]; + } + + return 184; +} + +static u32 dvb_dmx_crc32(struct dvb_demux_feed *f, const u8 *src, size_t len) +{ + return (f->feed.sec.crc_val = crc32_be(f->feed.sec.crc_val, src, len)); +} + +static void dvb_dmx_memcopy(struct dvb_demux_feed *f, u8 *d, const u8 *s, + size_t len) +{ + memcpy(d, s, len); +} + +/****************************************************************************** + * Software filter functions + ******************************************************************************/ + +static inline int dvb_dmx_swfilter_payload(struct dvb_demux_feed *feed, + const u8 *buf) +{ + int count = payload(buf); + int p; + //int ccok; + //u8 cc; + + if (count == 0) + return -1; + + p = 188 - count; + + /* + cc = buf[3] & 0x0f; + ccok = ((feed->cc + 1) & 0x0f) == cc; + feed->cc = cc; + if (!ccok) + printk("missed packet!\n"); + */ + + if (buf[1] & 0x40) // PUSI ? + feed->peslen = 0xfffa; + + feed->peslen += count; + + return feed->cb.ts(&buf[p], count, NULL, 0, &feed->feed.ts, DMX_OK); +} + +static int dvb_dmx_swfilter_sectionfilter(struct dvb_demux_feed *feed, + struct dvb_demux_filter *f) +{ + u8 neq = 0; + int i; + + for (i = 0; i < DVB_DEMUX_MASK_MAX; i++) { + u8 xor = f->filter.filter_value[i] ^ feed->feed.sec.secbuf[i]; + + if (f->maskandmode[i] & xor) + return 0; + + neq |= f->maskandnotmode[i] & xor; + } + + if (f->doneq && !neq) + return 0; + + return feed->cb.sec(feed->feed.sec.secbuf, feed->feed.sec.seclen, + NULL, 0, &f->filter, DMX_OK); +} + +static inline int dvb_dmx_swfilter_section_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct dvb_demux_filter *f = feed->filter; + struct dmx_section_feed *sec = &feed->feed.sec; + int section_syntax_indicator; + + if (!sec->is_filtering) + return 0; + + if (!f) + return 0; + + if (sec->check_crc) { + section_syntax_indicator = ((sec->secbuf[1] & 0x80) != 0); + if (section_syntax_indicator && + demux->check_crc32(feed, sec->secbuf, sec->seclen)) + return -1; + } + + do { + if (dvb_dmx_swfilter_sectionfilter(feed, f) < 0) + return -1; + } while ((f = f->next) && sec->is_filtering); + + sec->seclen = 0; + + return 0; +} + +static void dvb_dmx_swfilter_section_new(struct dvb_demux_feed *feed) +{ + struct dmx_section_feed *sec = &feed->feed.sec; + +#ifdef DVB_DEMUX_SECTION_LOSS_LOG + if (sec->secbufp < sec->tsfeedp) { + int i, n = sec->tsfeedp - sec->secbufp; + + /* + * Section padding is done with 0xff bytes entirely. + * Due to speed reasons, we won't check all of them + * but just first and last. + */ + if (sec->secbuf[0] != 0xff || sec->secbuf[n - 1] != 0xff) { + printk("dvb_demux.c section ts padding loss: %d/%d\n", + n, sec->tsfeedp); + printk("dvb_demux.c pad data:"); + for (i = 0; i < n; i++) + printk(" %02x", sec->secbuf[i]); + printk("\n"); + } + } +#endif + + sec->tsfeedp = sec->secbufp = sec->seclen = 0; + sec->secbuf = sec->secbuf_base; +} + +/* + * Losless Section Demux 1.4.1 by Emard + * Valsecchi Patrick: + * - middle of section A (no PUSI) + * - end of section A and start of section B + * (with PUSI pointing to the start of the second section) + * + * In this case, without feed->pusi_seen you'll receive a garbage section + * consisting of the end of section A. Basically because tsfeedp + * is incemented and the use=0 condition is not raised + * when the second packet arrives. + * + * Fix: + * when demux is started, let feed->pusi_seen = 0 to + * prevent initial feeding of garbage from the end of + * previous section. When you for the first time see PUSI=1 + * then set feed->pusi_seen = 1 + */ +static int dvb_dmx_swfilter_section_copy_dump(struct dvb_demux_feed *feed, + const u8 *buf, u8 len) +{ + struct dvb_demux *demux = feed->demux; + struct dmx_section_feed *sec = &feed->feed.sec; + u16 limit, seclen, n; + + if (sec->tsfeedp >= DMX_MAX_SECFEED_SIZE) + return 0; + + if (sec->tsfeedp + len > DMX_MAX_SECFEED_SIZE) { +#ifdef DVB_DEMUX_SECTION_LOSS_LOG + printk("dvb_demux.c section buffer full loss: %d/%d\n", + sec->tsfeedp + len - DMX_MAX_SECFEED_SIZE, + DMX_MAX_SECFEED_SIZE); +#endif + len = DMX_MAX_SECFEED_SIZE - sec->tsfeedp; + } + + if (len <= 0) + return 0; + + demux->memcopy(feed, sec->secbuf_base + sec->tsfeedp, buf, len); + sec->tsfeedp += len; + + /* + * Dump all the sections we can find in the data (Emard) + */ + limit = sec->tsfeedp; + if (limit > DMX_MAX_SECFEED_SIZE) + return -1; /* internal error should never happen */ + + /* to be sure always set secbuf */ + sec->secbuf = sec->secbuf_base + sec->secbufp; + + for (n = 0; sec->secbufp + 2 < limit; n++) { + seclen = section_length(sec->secbuf); + if (seclen <= 0 || seclen > DMX_MAX_SECTION_SIZE + || seclen + sec->secbufp > limit) + return 0; + sec->seclen = seclen; + sec->crc_val = ~0; + /* dump [secbuf .. secbuf+seclen) */ + if (feed->pusi_seen) + dvb_dmx_swfilter_section_feed(feed); +#ifdef DVB_DEMUX_SECTION_LOSS_LOG + else + printk("dvb_demux.c pusi not seen, discarding section data\n"); +#endif + sec->secbufp += seclen; /* secbufp and secbuf moving together is */ + sec->secbuf += seclen; /* redundant but saves pointer arithmetic */ + } + + return 0; +} + +static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed, + const u8 *buf) +{ + u8 p, count; + int ccok, dc_i = 0; + u8 cc; + + count = payload(buf); + + if (count == 0) /* count == 0 if no payload or out of range */ + return -1; + + p = 188 - count; /* payload start */ + + cc = buf[3] & 0x0f; + ccok = ((feed->cc + 1) & 0x0f) == cc; + feed->cc = cc; + + if (buf[3] & 0x20) { + /* adaption field present, check for discontinuity_indicator */ + if ((buf[4] > 0) && (buf[5] & 0x80)) + dc_i = 1; + } + + if (!ccok || dc_i) { +#ifdef DVB_DEMUX_SECTION_LOSS_LOG + printk("dvb_demux.c discontinuity detected %d bytes lost\n", + count); + /* + * those bytes under sume circumstances will again be reported + * in the following dvb_dmx_swfilter_section_new + */ +#endif + /* + * Discontinuity detected. Reset pusi_seen = 0 to + * stop feeding of suspicious data until next PUSI=1 arrives + */ + feed->pusi_seen = 0; + dvb_dmx_swfilter_section_new(feed); + } + + if (buf[1] & 0x40) { + /* PUSI=1 (is set), section boundary is here */ + if (count > 1 && buf[p] < count) { + const u8 *before = &buf[p + 1]; + u8 before_len = buf[p]; + const u8 *after = &before[before_len]; + u8 after_len = count - 1 - before_len; + + dvb_dmx_swfilter_section_copy_dump(feed, before, + before_len); + /* before start of new section, set pusi_seen = 1 */ + feed->pusi_seen = 1; + dvb_dmx_swfilter_section_new(feed); + dvb_dmx_swfilter_section_copy_dump(feed, after, + after_len); + } +#ifdef DVB_DEMUX_SECTION_LOSS_LOG + else if (count > 0) + printk("dvb_demux.c PUSI=1 but %d bytes lost\n", count); +#endif + } else { + /* PUSI=0 (is not set), no section boundary */ + dvb_dmx_swfilter_section_copy_dump(feed, &buf[p], count); + } + + return 0; +} + +static inline void dvb_dmx_swfilter_packet_type(struct dvb_demux_feed *feed, + const u8 *buf) +{ + switch (feed->type) { + case DMX_TYPE_TS: + if (!feed->feed.ts.is_filtering) + break; + if (feed->ts_type & TS_PACKET) { + if (feed->ts_type & TS_PAYLOAD_ONLY) + dvb_dmx_swfilter_payload(feed, buf); + else + feed->cb.ts(buf, 188, NULL, 0, &feed->feed.ts, + DMX_OK); + } + if (feed->ts_type & TS_DECODER) + if (feed->demux->write_to_decoder) + feed->demux->write_to_decoder(feed, buf, 188); + break; + + case DMX_TYPE_SEC: + if (!feed->feed.sec.is_filtering) + break; + if (dvb_dmx_swfilter_section_packet(feed, buf) < 0) + feed->feed.sec.seclen = feed->feed.sec.secbufp = 0; + break; + + default: + break; + } +} + +#define DVR_FEED(f) \ + (((f)->type == DMX_TYPE_TS) && \ + ((f)->feed.ts.is_filtering) && \ + (((f)->ts_type & (TS_PACKET | TS_DEMUX)) == TS_PACKET)) + +static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) +{ + struct dvb_demux_feed *feed; + u16 pid = ts_pid(buf); + int dvr_done = 0; + + if (dvb_demux_speedcheck) { + struct timespec cur_time, delta_time; + u64 speed_bytes, speed_timedelta; + + demux->speed_pkts_cnt++; + + /* show speed every SPEED_PKTS_INTERVAL packets */ + if (!(demux->speed_pkts_cnt % SPEED_PKTS_INTERVAL)) { + cur_time = current_kernel_time(); + + if (demux->speed_last_time.tv_sec != 0 && + demux->speed_last_time.tv_nsec != 0) { + delta_time = timespec_sub(cur_time, + demux->speed_last_time); + speed_bytes = (u64)demux->speed_pkts_cnt + * 188 * 8; + /* convert to 1024 basis */ + speed_bytes = 1000 * div64_u64(speed_bytes, + 1024); + speed_timedelta = + (u64)timespec_to_ns(&delta_time); + speed_timedelta = div64_u64(speed_timedelta, + 1000000); /* nsec -> usec */ + printk(KERN_INFO "TS speed %llu Kbits/sec \n", + div64_u64(speed_bytes, + speed_timedelta)); + } + + demux->speed_last_time = cur_time; + demux->speed_pkts_cnt = 0; + } + } + + if (buf[1] & 0x80) { + dprintk_tscheck("TEI detected. " + "PID=0x%x data1=0x%x\n", + pid, buf[1]); + /* data in this packet cant be trusted - drop it unless + * module option dvb_demux_feed_err_pkts is set */ + if (!dvb_demux_feed_err_pkts) + return; + } else /* if TEI bit is set, pid may be wrong- skip pkt counter */ + if (demux->cnt_storage && dvb_demux_tscheck) { + /* check pkt counter */ + if (pid < MAX_PID) { + if (buf[3] & 0x10) + demux->cnt_storage[pid] = + (demux->cnt_storage[pid] + 1) & 0xf; + + if ((buf[3] & 0xf) != demux->cnt_storage[pid]) { + dprintk_tscheck("TS packet counter mismatch. PID=0x%x expected 0x%x got 0x%x\n", + pid, demux->cnt_storage[pid], + buf[3] & 0xf); + demux->cnt_storage[pid] = buf[3] & 0xf; + } + } + /* end check */ + } + + list_for_each_entry(feed, &demux->feed_list, list_head) { + if ((feed->pid != pid) && (feed->pid != 0x2000)) + continue; + + /* copy each packet only once to the dvr device, even + * if a PID is in multiple filters (e.g. video + PCR) */ + if ((DVR_FEED(feed)) && (dvr_done++)) + continue; + + if (feed->pid == pid) + dvb_dmx_swfilter_packet_type(feed, buf); + else if (feed->pid == 0x2000) + feed->cb.ts(buf, 188, NULL, 0, &feed->feed.ts, DMX_OK); + } +} + +void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, + size_t count) +{ + spin_lock(&demux->lock); + + while (count--) { + if (buf[0] == 0x47) + dvb_dmx_swfilter_packet(demux, buf); + buf += 188; + } + + spin_unlock(&demux->lock); +} + +EXPORT_SYMBOL(dvb_dmx_swfilter_packets); + +static inline int find_next_packet(const u8 *buf, int pos, size_t count, + const int pktsize) +{ + int start = pos, lost; + + while (pos < count) { + if (buf[pos] == 0x47 || + (pktsize == 204 && buf[pos] == 0xB8)) + break; + pos++; + } + + lost = pos - start; + if (lost) { + /* This garbage is part of a valid packet? */ + int backtrack = pos - pktsize; + if (backtrack >= 0 && (buf[backtrack] == 0x47 || + (pktsize == 204 && buf[backtrack] == 0xB8))) + return backtrack; + } + + return pos; +} + +/* Filter all pktsize= 188 or 204 sized packets and skip garbage. */ +static inline void _dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, + size_t count, const int pktsize) +{ + int p = 0, i, j; + const u8 *q; + + spin_lock(&demux->lock); + + if (demux->tsbufp) { /* tsbuf[0] is now 0x47. */ + i = demux->tsbufp; + j = pktsize - i; + if (count < j) { + memcpy(&demux->tsbuf[i], buf, count); + demux->tsbufp += count; + goto bailout; + } + memcpy(&demux->tsbuf[i], buf, j); + if (demux->tsbuf[0] == 0x47) /* double check */ + dvb_dmx_swfilter_packet(demux, demux->tsbuf); + demux->tsbufp = 0; + p += j; + } + + while (1) { + p = find_next_packet(buf, p, count, pktsize); + if (p >= count) + break; + if (count - p < pktsize) + break; + + q = &buf[p]; + + if (pktsize == 204 && (*q == 0xB8)) { + memcpy(demux->tsbuf, q, 188); + demux->tsbuf[0] = 0x47; + q = demux->tsbuf; + } + dvb_dmx_swfilter_packet(demux, q); + p += pktsize; + } + + i = count - p; + if (i) { + memcpy(demux->tsbuf, &buf[p], i); + demux->tsbufp = i; + if (pktsize == 204 && demux->tsbuf[0] == 0xB8) + demux->tsbuf[0] = 0x47; + } + +bailout: + spin_unlock(&demux->lock); +} + +void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) +{ + _dvb_dmx_swfilter(demux, buf, count, 188); +} +EXPORT_SYMBOL(dvb_dmx_swfilter); + +void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) +{ + _dvb_dmx_swfilter(demux, buf, count, 204); +} +EXPORT_SYMBOL(dvb_dmx_swfilter_204); + +void dvb_dmx_swfilter_raw(struct dvb_demux *demux, const u8 *buf, size_t count) +{ + spin_lock(&demux->lock); + + demux->feed->cb.ts(buf, count, NULL, 0, &demux->feed->feed.ts, DMX_OK); + + spin_unlock(&demux->lock); +} +EXPORT_SYMBOL(dvb_dmx_swfilter_raw); + +static struct dvb_demux_filter *dvb_dmx_filter_alloc(struct dvb_demux *demux) +{ + int i; + + for (i = 0; i < demux->filternum; i++) + if (demux->filter[i].state == DMX_STATE_FREE) + break; + + if (i == demux->filternum) + return NULL; + + demux->filter[i].state = DMX_STATE_ALLOCATED; + + return &demux->filter[i]; +} + +static struct dvb_demux_feed *dvb_dmx_feed_alloc(struct dvb_demux *demux) +{ + int i; + + for (i = 0; i < demux->feednum; i++) + if (demux->feed[i].state == DMX_STATE_FREE) + break; + + if (i == demux->feednum) + return NULL; + + demux->feed[i].state = DMX_STATE_ALLOCATED; + + return &demux->feed[i]; +} + +static int dvb_demux_feed_find(struct dvb_demux_feed *feed) +{ + struct dvb_demux_feed *entry; + + list_for_each_entry(entry, &feed->demux->feed_list, list_head) + if (entry == feed) + return 1; + + return 0; +} + +static void dvb_demux_feed_add(struct dvb_demux_feed *feed) +{ + spin_lock_irq(&feed->demux->lock); + if (dvb_demux_feed_find(feed)) { + printk(KERN_ERR "%s: feed already in list (type=%x state=%x pid=%x)\n", + __func__, feed->type, feed->state, feed->pid); + goto out; + } + + list_add(&feed->list_head, &feed->demux->feed_list); +out: + spin_unlock_irq(&feed->demux->lock); +} + +static void dvb_demux_feed_del(struct dvb_demux_feed *feed) +{ + spin_lock_irq(&feed->demux->lock); + if (!(dvb_demux_feed_find(feed))) { + printk(KERN_ERR "%s: feed not in list (type=%x state=%x pid=%x)\n", + __func__, feed->type, feed->state, feed->pid); + goto out; + } + + list_del(&feed->list_head); +out: + spin_unlock_irq(&feed->demux->lock); +} + +static int dmx_ts_feed_set(struct dmx_ts_feed *ts_feed, u16 pid, int ts_type, + enum dmx_ts_pes pes_type, + size_t circular_buffer_size, struct timespec timeout) +{ + struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed; + struct dvb_demux *demux = feed->demux; + + if (pid > DMX_MAX_PID) + return -EINVAL; + + if (mutex_lock_interruptible(&demux->mutex)) + return -ERESTARTSYS; + + if (ts_type & TS_DECODER) { + if (pes_type >= DMX_PES_OTHER) { + mutex_unlock(&demux->mutex); + return -EINVAL; + } + + if (demux->pesfilter[pes_type] && + demux->pesfilter[pes_type] != feed) { + mutex_unlock(&demux->mutex); + return -EINVAL; + } + + demux->pesfilter[pes_type] = feed; + demux->pids[pes_type] = pid; + } + + dvb_demux_feed_add(feed); + + feed->pid = pid; + feed->buffer_size = circular_buffer_size; + feed->timeout = timeout; + feed->ts_type = ts_type; + feed->pes_type = pes_type; + + if (feed->buffer_size) { +#ifdef NOBUFS + feed->buffer = NULL; +#else + feed->buffer = vmalloc(feed->buffer_size); + if (!feed->buffer) { + mutex_unlock(&demux->mutex); + return -ENOMEM; + } +#endif + } + + feed->state = DMX_STATE_READY; + mutex_unlock(&demux->mutex); + + return 0; +} + +static int dmx_ts_feed_start_filtering(struct dmx_ts_feed *ts_feed) +{ + struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed; + struct dvb_demux *demux = feed->demux; + int ret; + + if (mutex_lock_interruptible(&demux->mutex)) + return -ERESTARTSYS; + + if (feed->state != DMX_STATE_READY || feed->type != DMX_TYPE_TS) { + mutex_unlock(&demux->mutex); + return -EINVAL; + } + + if (!demux->start_feed) { + mutex_unlock(&demux->mutex); + return -ENODEV; + } + + if ((ret = demux->start_feed(feed)) < 0) { + mutex_unlock(&demux->mutex); + return ret; + } + + spin_lock_irq(&demux->lock); + ts_feed->is_filtering = 1; + feed->state = DMX_STATE_GO; + spin_unlock_irq(&demux->lock); + mutex_unlock(&demux->mutex); + + return 0; +} + +static int dmx_ts_feed_stop_filtering(struct dmx_ts_feed *ts_feed) +{ + struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed; + struct dvb_demux *demux = feed->demux; + int ret; + + mutex_lock(&demux->mutex); + + if (feed->state < DMX_STATE_GO) { + mutex_unlock(&demux->mutex); + return -EINVAL; + } + + if (!demux->stop_feed) { + mutex_unlock(&demux->mutex); + return -ENODEV; + } + + ret = demux->stop_feed(feed); + + spin_lock_irq(&demux->lock); + ts_feed->is_filtering = 0; + feed->state = DMX_STATE_ALLOCATED; + spin_unlock_irq(&demux->lock); + mutex_unlock(&demux->mutex); + + return ret; +} + +static int dvbdmx_allocate_ts_feed(struct dmx_demux *dmx, + struct dmx_ts_feed **ts_feed, + dmx_ts_cb callback) +{ + struct dvb_demux *demux = (struct dvb_demux *)dmx; + struct dvb_demux_feed *feed; + + if (mutex_lock_interruptible(&demux->mutex)) + return -ERESTARTSYS; + + if (!(feed = dvb_dmx_feed_alloc(demux))) { + mutex_unlock(&demux->mutex); + return -EBUSY; + } + + feed->type = DMX_TYPE_TS; + feed->cb.ts = callback; + feed->demux = demux; + feed->pid = 0xffff; + feed->peslen = 0xfffa; + feed->buffer = NULL; + + (*ts_feed) = &feed->feed.ts; + (*ts_feed)->parent = dmx; + (*ts_feed)->priv = NULL; + (*ts_feed)->is_filtering = 0; + (*ts_feed)->start_filtering = dmx_ts_feed_start_filtering; + (*ts_feed)->stop_filtering = dmx_ts_feed_stop_filtering; + (*ts_feed)->set = dmx_ts_feed_set; + + if (!(feed->filter = dvb_dmx_filter_alloc(demux))) { + feed->state = DMX_STATE_FREE; + mutex_unlock(&demux->mutex); + return -EBUSY; + } + + feed->filter->type = DMX_TYPE_TS; + feed->filter->feed = feed; + feed->filter->state = DMX_STATE_READY; + + mutex_unlock(&demux->mutex); + + return 0; +} + +static int dvbdmx_release_ts_feed(struct dmx_demux *dmx, + struct dmx_ts_feed *ts_feed) +{ + struct dvb_demux *demux = (struct dvb_demux *)dmx; + struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed; + + mutex_lock(&demux->mutex); + + if (feed->state == DMX_STATE_FREE) { + mutex_unlock(&demux->mutex); + return -EINVAL; + } +#ifndef NOBUFS + vfree(feed->buffer); + feed->buffer = NULL; +#endif + + feed->state = DMX_STATE_FREE; + feed->filter->state = DMX_STATE_FREE; + + dvb_demux_feed_del(feed); + + feed->pid = 0xffff; + + if (feed->ts_type & TS_DECODER && feed->pes_type < DMX_PES_OTHER) + demux->pesfilter[feed->pes_type] = NULL; + + mutex_unlock(&demux->mutex); + return 0; +} + +/****************************************************************************** + * dmx_section_feed API calls + ******************************************************************************/ + +static int dmx_section_feed_allocate_filter(struct dmx_section_feed *feed, + struct dmx_section_filter **filter) +{ + struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed; + struct dvb_demux *dvbdemux = dvbdmxfeed->demux; + struct dvb_demux_filter *dvbdmxfilter; + + if (mutex_lock_interruptible(&dvbdemux->mutex)) + return -ERESTARTSYS; + + dvbdmxfilter = dvb_dmx_filter_alloc(dvbdemux); + if (!dvbdmxfilter) { + mutex_unlock(&dvbdemux->mutex); + return -EBUSY; + } + + spin_lock_irq(&dvbdemux->lock); + *filter = &dvbdmxfilter->filter; + (*filter)->parent = feed; + (*filter)->priv = NULL; + dvbdmxfilter->feed = dvbdmxfeed; + dvbdmxfilter->type = DMX_TYPE_SEC; + dvbdmxfilter->state = DMX_STATE_READY; + dvbdmxfilter->next = dvbdmxfeed->filter; + dvbdmxfeed->filter = dvbdmxfilter; + spin_unlock_irq(&dvbdemux->lock); + + mutex_unlock(&dvbdemux->mutex); + return 0; +} + +static int dmx_section_feed_set(struct dmx_section_feed *feed, + u16 pid, size_t circular_buffer_size, + int check_crc) +{ + struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed; + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + + if (pid > 0x1fff) + return -EINVAL; + + if (mutex_lock_interruptible(&dvbdmx->mutex)) + return -ERESTARTSYS; + + dvb_demux_feed_add(dvbdmxfeed); + + dvbdmxfeed->pid = pid; + dvbdmxfeed->buffer_size = circular_buffer_size; + dvbdmxfeed->feed.sec.check_crc = check_crc; + +#ifdef NOBUFS + dvbdmxfeed->buffer = NULL; +#else + dvbdmxfeed->buffer = vmalloc(dvbdmxfeed->buffer_size); + if (!dvbdmxfeed->buffer) { + mutex_unlock(&dvbdmx->mutex); + return -ENOMEM; + } +#endif + + dvbdmxfeed->state = DMX_STATE_READY; + mutex_unlock(&dvbdmx->mutex); + return 0; +} + +static void prepare_secfilters(struct dvb_demux_feed *dvbdmxfeed) +{ + int i; + struct dvb_demux_filter *f; + struct dmx_section_filter *sf; + u8 mask, mode, doneq; + + if (!(f = dvbdmxfeed->filter)) + return; + do { + sf = &f->filter; + doneq = 0; + for (i = 0; i < DVB_DEMUX_MASK_MAX; i++) { + mode = sf->filter_mode[i]; + mask = sf->filter_mask[i]; + f->maskandmode[i] = mask & mode; + doneq |= f->maskandnotmode[i] = mask & ~mode; + } + f->doneq = doneq ? 1 : 0; + } while ((f = f->next)); +} + +static int dmx_section_feed_start_filtering(struct dmx_section_feed *feed) +{ + struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed; + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + int ret; + + if (mutex_lock_interruptible(&dvbdmx->mutex)) + return -ERESTARTSYS; + + if (feed->is_filtering) { + mutex_unlock(&dvbdmx->mutex); + return -EBUSY; + } + + if (!dvbdmxfeed->filter) { + mutex_unlock(&dvbdmx->mutex); + return -EINVAL; + } + + dvbdmxfeed->feed.sec.tsfeedp = 0; + dvbdmxfeed->feed.sec.secbuf = dvbdmxfeed->feed.sec.secbuf_base; + dvbdmxfeed->feed.sec.secbufp = 0; + dvbdmxfeed->feed.sec.seclen = 0; + + if (!dvbdmx->start_feed) { + mutex_unlock(&dvbdmx->mutex); + return -ENODEV; + } + + prepare_secfilters(dvbdmxfeed); + + if ((ret = dvbdmx->start_feed(dvbdmxfeed)) < 0) { + mutex_unlock(&dvbdmx->mutex); + return ret; + } + + spin_lock_irq(&dvbdmx->lock); + feed->is_filtering = 1; + dvbdmxfeed->state = DMX_STATE_GO; + spin_unlock_irq(&dvbdmx->lock); + + mutex_unlock(&dvbdmx->mutex); + return 0; +} + +static int dmx_section_feed_stop_filtering(struct dmx_section_feed *feed) +{ + struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed; + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + int ret; + + mutex_lock(&dvbdmx->mutex); + + if (!dvbdmx->stop_feed) { + mutex_unlock(&dvbdmx->mutex); + return -ENODEV; + } + + ret = dvbdmx->stop_feed(dvbdmxfeed); + + spin_lock_irq(&dvbdmx->lock); + dvbdmxfeed->state = DMX_STATE_READY; + feed->is_filtering = 0; + spin_unlock_irq(&dvbdmx->lock); + + mutex_unlock(&dvbdmx->mutex); + return ret; +} + +static int dmx_section_feed_release_filter(struct dmx_section_feed *feed, + struct dmx_section_filter *filter) +{ + struct dvb_demux_filter *dvbdmxfilter = (struct dvb_demux_filter *)filter, *f; + struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed; + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + + mutex_lock(&dvbdmx->mutex); + + if (dvbdmxfilter->feed != dvbdmxfeed) { + mutex_unlock(&dvbdmx->mutex); + return -EINVAL; + } + + if (feed->is_filtering) + feed->stop_filtering(feed); + + spin_lock_irq(&dvbdmx->lock); + f = dvbdmxfeed->filter; + + if (f == dvbdmxfilter) { + dvbdmxfeed->filter = dvbdmxfilter->next; + } else { + while (f->next != dvbdmxfilter) + f = f->next; + f->next = f->next->next; + } + + dvbdmxfilter->state = DMX_STATE_FREE; + spin_unlock_irq(&dvbdmx->lock); + mutex_unlock(&dvbdmx->mutex); + return 0; +} + +static int dvbdmx_allocate_section_feed(struct dmx_demux *demux, + struct dmx_section_feed **feed, + dmx_section_cb callback) +{ + struct dvb_demux *dvbdmx = (struct dvb_demux *)demux; + struct dvb_demux_feed *dvbdmxfeed; + + if (mutex_lock_interruptible(&dvbdmx->mutex)) + return -ERESTARTSYS; + + if (!(dvbdmxfeed = dvb_dmx_feed_alloc(dvbdmx))) { + mutex_unlock(&dvbdmx->mutex); + return -EBUSY; + } + + dvbdmxfeed->type = DMX_TYPE_SEC; + dvbdmxfeed->cb.sec = callback; + dvbdmxfeed->demux = dvbdmx; + dvbdmxfeed->pid = 0xffff; + dvbdmxfeed->feed.sec.secbuf = dvbdmxfeed->feed.sec.secbuf_base; + dvbdmxfeed->feed.sec.secbufp = dvbdmxfeed->feed.sec.seclen = 0; + dvbdmxfeed->feed.sec.tsfeedp = 0; + dvbdmxfeed->filter = NULL; + dvbdmxfeed->buffer = NULL; + + (*feed) = &dvbdmxfeed->feed.sec; + (*feed)->is_filtering = 0; + (*feed)->parent = demux; + (*feed)->priv = NULL; + + (*feed)->set = dmx_section_feed_set; + (*feed)->allocate_filter = dmx_section_feed_allocate_filter; + (*feed)->start_filtering = dmx_section_feed_start_filtering; + (*feed)->stop_filtering = dmx_section_feed_stop_filtering; + (*feed)->release_filter = dmx_section_feed_release_filter; + + mutex_unlock(&dvbdmx->mutex); + return 0; +} + +static int dvbdmx_release_section_feed(struct dmx_demux *demux, + struct dmx_section_feed *feed) +{ + struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed; + struct dvb_demux *dvbdmx = (struct dvb_demux *)demux; + + mutex_lock(&dvbdmx->mutex); + + if (dvbdmxfeed->state == DMX_STATE_FREE) { + mutex_unlock(&dvbdmx->mutex); + return -EINVAL; + } +#ifndef NOBUFS + vfree(dvbdmxfeed->buffer); + dvbdmxfeed->buffer = NULL; +#endif + dvbdmxfeed->state = DMX_STATE_FREE; + + dvb_demux_feed_del(dvbdmxfeed); + + dvbdmxfeed->pid = 0xffff; + + mutex_unlock(&dvbdmx->mutex); + return 0; +} + +/****************************************************************************** + * dvb_demux kernel data API calls + ******************************************************************************/ + +static int dvbdmx_open(struct dmx_demux *demux) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + + if (dvbdemux->users >= MAX_DVB_DEMUX_USERS) + return -EUSERS; + + dvbdemux->users++; + return 0; +} + +static int dvbdmx_close(struct dmx_demux *demux) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + + if (dvbdemux->users == 0) + return -ENODEV; + + dvbdemux->users--; + //FIXME: release any unneeded resources if users==0 + return 0; +} + +static int dvbdmx_write(struct dmx_demux *demux, const char __user *buf, size_t count) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + void *p; + + if ((!demux->frontend) || (demux->frontend->source != DMX_MEMORY_FE)) + return -EINVAL; + + p = memdup_user(buf, count); + if (IS_ERR(p)) + return PTR_ERR(p); + if (mutex_lock_interruptible(&dvbdemux->mutex)) { + kfree(p); + return -ERESTARTSYS; + } + dvb_dmx_swfilter(dvbdemux, p, count); + kfree(p); + mutex_unlock(&dvbdemux->mutex); + + if (signal_pending(current)) + return -EINTR; + return count; +} + +static int dvbdmx_add_frontend(struct dmx_demux *demux, + struct dmx_frontend *frontend) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + struct list_head *head = &dvbdemux->frontend_list; + + list_add(&(frontend->connectivity_list), head); + + return 0; +} + +static int dvbdmx_remove_frontend(struct dmx_demux *demux, + struct dmx_frontend *frontend) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + struct list_head *pos, *n, *head = &dvbdemux->frontend_list; + + list_for_each_safe(pos, n, head) { + if (DMX_FE_ENTRY(pos) == frontend) { + list_del(pos); + return 0; + } + } + + return -ENODEV; +} + +static struct list_head *dvbdmx_get_frontends(struct dmx_demux *demux) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + + if (list_empty(&dvbdemux->frontend_list)) + return NULL; + + return &dvbdemux->frontend_list; +} + +static int dvbdmx_connect_frontend(struct dmx_demux *demux, + struct dmx_frontend *frontend) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + + if (demux->frontend) + return -EINVAL; + + mutex_lock(&dvbdemux->mutex); + + demux->frontend = frontend; + mutex_unlock(&dvbdemux->mutex); + return 0; +} + +static int dvbdmx_disconnect_frontend(struct dmx_demux *demux) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + + mutex_lock(&dvbdemux->mutex); + + demux->frontend = NULL; + mutex_unlock(&dvbdemux->mutex); + return 0; +} + +static int dvbdmx_get_pes_pids(struct dmx_demux *demux, u16 * pids) +{ + struct dvb_demux *dvbdemux = (struct dvb_demux *)demux; + + memcpy(pids, dvbdemux->pids, 5 * sizeof(u16)); + return 0; +} + +int dvb_dmx_init(struct dvb_demux *dvbdemux) +{ + int i; + struct dmx_demux *dmx = &dvbdemux->dmx; + + dvbdemux->cnt_storage = NULL; + dvbdemux->users = 0; + dvbdemux->filter = vmalloc(dvbdemux->filternum * sizeof(struct dvb_demux_filter)); + + if (!dvbdemux->filter) + return -ENOMEM; + + dvbdemux->feed = vmalloc(dvbdemux->feednum * sizeof(struct dvb_demux_feed)); + if (!dvbdemux->feed) { + vfree(dvbdemux->filter); + dvbdemux->filter = NULL; + return -ENOMEM; + } + for (i = 0; i < dvbdemux->filternum; i++) { + dvbdemux->filter[i].state = DMX_STATE_FREE; + dvbdemux->filter[i].index = i; + } + for (i = 0; i < dvbdemux->feednum; i++) { + dvbdemux->feed[i].state = DMX_STATE_FREE; + dvbdemux->feed[i].index = i; + } + + dvbdemux->cnt_storage = vmalloc(MAX_PID + 1); + if (!dvbdemux->cnt_storage) + printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n"); + + INIT_LIST_HEAD(&dvbdemux->frontend_list); + + for (i = 0; i < DMX_PES_OTHER; i++) { + dvbdemux->pesfilter[i] = NULL; + dvbdemux->pids[i] = 0xffff; + } + + INIT_LIST_HEAD(&dvbdemux->feed_list); + + dvbdemux->playing = 0; + dvbdemux->recording = 0; + dvbdemux->tsbufp = 0; + + if (!dvbdemux->check_crc32) + dvbdemux->check_crc32 = dvb_dmx_crc32; + + if (!dvbdemux->memcopy) + dvbdemux->memcopy = dvb_dmx_memcopy; + + dmx->frontend = NULL; + dmx->priv = dvbdemux; + dmx->open = dvbdmx_open; + dmx->close = dvbdmx_close; + dmx->write = dvbdmx_write; + dmx->allocate_ts_feed = dvbdmx_allocate_ts_feed; + dmx->release_ts_feed = dvbdmx_release_ts_feed; + dmx->allocate_section_feed = dvbdmx_allocate_section_feed; + dmx->release_section_feed = dvbdmx_release_section_feed; + + dmx->add_frontend = dvbdmx_add_frontend; + dmx->remove_frontend = dvbdmx_remove_frontend; + dmx->get_frontends = dvbdmx_get_frontends; + dmx->connect_frontend = dvbdmx_connect_frontend; + dmx->disconnect_frontend = dvbdmx_disconnect_frontend; + dmx->get_pes_pids = dvbdmx_get_pes_pids; + + mutex_init(&dvbdemux->mutex); + spin_lock_init(&dvbdemux->lock); + + return 0; +} + +EXPORT_SYMBOL(dvb_dmx_init); + +void dvb_dmx_release(struct dvb_demux *dvbdemux) +{ + vfree(dvbdemux->cnt_storage); + vfree(dvbdemux->filter); + vfree(dvbdemux->feed); +} + +EXPORT_SYMBOL(dvb_dmx_release); diff --git a/drivers/media/dvb-core/dvb_demux.h b/drivers/media/dvb-core/dvb_demux.h new file mode 100644 index 00000000..ae7fc33c --- /dev/null +++ b/drivers/media/dvb-core/dvb_demux.h @@ -0,0 +1,151 @@ +/* + * dvb_demux.h: DVB kernel demux API + * + * Copyright (C) 2000-2001 Marcus Metzler & Ralph Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVB_DEMUX_H_ +#define _DVB_DEMUX_H_ + +#include +#include +#include +#include + +#include "demux.h" + +#define DMX_TYPE_TS 0 +#define DMX_TYPE_SEC 1 +#define DMX_TYPE_PES 2 + +#define DMX_STATE_FREE 0 +#define DMX_STATE_ALLOCATED 1 +#define DMX_STATE_SET 2 +#define DMX_STATE_READY 3 +#define DMX_STATE_GO 4 + +#define DVB_DEMUX_MASK_MAX 18 + +#define MAX_PID 0x1fff + +#define SPEED_PKTS_INTERVAL 50000 + +struct dvb_demux_filter { + struct dmx_section_filter filter; + u8 maskandmode[DMX_MAX_FILTER_SIZE]; + u8 maskandnotmode[DMX_MAX_FILTER_SIZE]; + int doneq; + + struct dvb_demux_filter *next; + struct dvb_demux_feed *feed; + int index; + int state; + int type; + + u16 hw_handle; + struct timer_list timer; +}; + +#define DMX_FEED_ENTRY(pos) list_entry(pos, struct dvb_demux_feed, list_head) + +struct dvb_demux_feed { + union { + struct dmx_ts_feed ts; + struct dmx_section_feed sec; + } feed; + + union { + dmx_ts_cb ts; + dmx_section_cb sec; + } cb; + + struct dvb_demux *demux; + void *priv; + int type; + int state; + u16 pid; + u8 *buffer; + int buffer_size; + + struct timespec timeout; + struct dvb_demux_filter *filter; + + int ts_type; + enum dmx_ts_pes pes_type; + + int cc; + int pusi_seen; /* prevents feeding of garbage from previous section */ + + u16 peslen; + + struct list_head list_head; + unsigned int index; /* a unique index for each feed (can be used as hardware pid filter index) */ +}; + +struct dvb_demux { + struct dmx_demux dmx; + void *priv; + int filternum; + int feednum; + int (*start_feed)(struct dvb_demux_feed *feed); + int (*stop_feed)(struct dvb_demux_feed *feed); + int (*write_to_decoder)(struct dvb_demux_feed *feed, + const u8 *buf, size_t len); + u32 (*check_crc32)(struct dvb_demux_feed *feed, + const u8 *buf, size_t len); + void (*memcopy)(struct dvb_demux_feed *feed, u8 *dst, + const u8 *src, size_t len); + + int users; +#define MAX_DVB_DEMUX_USERS 10 + struct dvb_demux_filter *filter; + struct dvb_demux_feed *feed; + + struct list_head frontend_list; + + struct dvb_demux_feed *pesfilter[DMX_PES_OTHER]; + u16 pids[DMX_PES_OTHER]; + int playing; + int recording; + +#define DMX_MAX_PID 0x2000 + struct list_head feed_list; + u8 tsbuf[204]; + int tsbufp; + + struct mutex mutex; + spinlock_t lock; + + uint8_t *cnt_storage; /* for TS continuity check */ + + struct timespec speed_last_time; /* for TS speed check */ + uint32_t speed_pkts_cnt; /* for TS speed check */ +}; + +int dvb_dmx_init(struct dvb_demux *dvbdemux); +void dvb_dmx_release(struct dvb_demux *dvbdemux); +void dvb_dmx_swfilter_packets(struct dvb_demux *dvbdmx, const u8 *buf, + size_t count); +void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count); +void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, + size_t count); +void dvb_dmx_swfilter_raw(struct dvb_demux *demux, const u8 *buf, + size_t count); + +#endif /* _DVB_DEMUX_H_ */ diff --git a/drivers/media/dvb-core/dvb_filter.c b/drivers/media/dvb-core/dvb_filter.c new file mode 100644 index 00000000..772003fb --- /dev/null +++ b/drivers/media/dvb-core/dvb_filter.c @@ -0,0 +1,603 @@ +#include +#include +#include +#include "dvb_filter.h" + +#if 0 +static unsigned int bitrates[3][16] = +{{0,32,64,96,128,160,192,224,256,288,320,352,384,416,448,0}, + {0,32,48,56,64,80,96,112,128,160,192,224,256,320,384,0}, + {0,32,40,48,56,64,80,96,112,128,160,192,224,256,320,0}}; +#endif + +static u32 freq[4] = {480, 441, 320, 0}; + +static unsigned int ac3_bitrates[32] = + {32,40,48,56,64,80,96,112,128,160,192,224,256,320,384,448,512,576,640, + 0,0,0,0,0,0,0,0,0,0,0,0,0}; + +static u32 ac3_frames[3][32] = + {{64,80,96,112,128,160,192,224,256,320,384,448,512,640,768,896,1024, + 1152,1280,0,0,0,0,0,0,0,0,0,0,0,0,0}, + {69,87,104,121,139,174,208,243,278,348,417,487,557,696,835,975,1114, + 1253,1393,0,0,0,0,0,0,0,0,0,0,0,0,0}, + {96,120,144,168,192,240,288,336,384,480,576,672,768,960,1152,1344, + 1536,1728,1920,0,0,0,0,0,0,0,0,0,0,0,0,0}}; + + + +#if 0 +static void setup_ts2pes(ipack *pa, ipack *pv, u16 *pida, u16 *pidv, + void (*pes_write)(u8 *buf, int count, void *data), + void *priv) +{ + dvb_filter_ipack_init(pa, IPACKS, pes_write); + dvb_filter_ipack_init(pv, IPACKS, pes_write); + pa->pid = pida; + pv->pid = pidv; + pa->data = priv; + pv->data = priv; +} +#endif + +#if 0 +static void ts_to_pes(ipack *p, u8 *buf) // don't need count (=188) +{ + u8 off = 0; + + if (!buf || !p ){ + printk("NULL POINTER IDIOT\n"); + return; + } + if (buf[1]&PAY_START) { + if (p->plength == MMAX_PLENGTH-6 && p->found>6){ + p->plength = p->found-6; + p->found = 0; + send_ipack(p); + dvb_filter_ipack_reset(p); + } + } + if (buf[3] & ADAPT_FIELD) { // adaptation field? + off = buf[4] + 1; + if (off+4 > 187) return; + } + dvb_filter_instant_repack(buf+4+off, TS_SIZE-4-off, p); +} +#endif + +#if 0 +/* needs 5 byte input, returns picture coding type*/ +static int read_picture_header(u8 *headr, struct mpg_picture *pic, int field, int pr) +{ + u8 pct; + + if (pr) printk( "Pic header: "); + pic->temporal_reference[field] = (( headr[0] << 2 ) | + (headr[1] & 0x03) )& 0x03ff; + if (pr) printk( " temp ref: 0x%04x", pic->temporal_reference[field]); + + pct = ( headr[1] >> 2 ) & 0x07; + pic->picture_coding_type[field] = pct; + if (pr) { + switch(pct){ + case I_FRAME: + printk( " I-FRAME"); + break; + case B_FRAME: + printk( " B-FRAME"); + break; + case P_FRAME: + printk( " P-FRAME"); + break; + } + } + + + pic->vinfo.vbv_delay = (( headr[1] >> 5 ) | ( headr[2] << 3) | + ( (headr[3] & 0x1F) << 11) ) & 0xffff; + + if (pr) printk( " vbv delay: 0x%04x", pic->vinfo.vbv_delay); + + pic->picture_header_parameter = ( headr[3] & 0xe0 ) | + ((headr[4] & 0x80) >> 3); + + if ( pct == B_FRAME ){ + pic->picture_header_parameter |= ( headr[4] >> 3 ) & 0x0f; + } + if (pr) printk( " pic head param: 0x%x", + pic->picture_header_parameter); + + return pct; +} +#endif + +#if 0 +/* needs 4 byte input */ +static int read_gop_header(u8 *headr, struct mpg_picture *pic, int pr) +{ + if (pr) printk("GOP header: "); + + pic->time_code = (( headr[0] << 17 ) | ( headr[1] << 9) | + ( headr[2] << 1 ) | (headr[3] &0x01)) & 0x1ffffff; + + if (pr) printk(" time: %d:%d.%d ", (headr[0]>>2)& 0x1F, + ((headr[0]<<4)& 0x30)| ((headr[1]>>4)& 0x0F), + ((headr[1]<<3)& 0x38)| ((headr[2]>>5)& 0x0F)); + + if ( ( headr[3] & 0x40 ) != 0 ){ + pic->closed_gop = 1; + } else { + pic->closed_gop = 0; + } + if (pr) printk("closed: %d", pic->closed_gop); + + if ( ( headr[3] & 0x20 ) != 0 ){ + pic->broken_link = 1; + } else { + pic->broken_link = 0; + } + if (pr) printk(" broken: %d\n", pic->broken_link); + + return 0; +} +#endif + +#if 0 +/* needs 8 byte input */ +static int read_sequence_header(u8 *headr, struct dvb_video_info *vi, int pr) +{ + int sw; + int form = -1; + + if (pr) printk("Reading sequence header\n"); + + vi->horizontal_size = ((headr[1] &0xF0) >> 4) | (headr[0] << 4); + vi->vertical_size = ((headr[1] &0x0F) << 8) | (headr[2]); + + sw = (int)((headr[3]&0xF0) >> 4) ; + + switch( sw ){ + case 1: + if (pr) + printk("Videostream: ASPECT: 1:1"); + vi->aspect_ratio = 100; + break; + case 2: + if (pr) + printk("Videostream: ASPECT: 4:3"); + vi->aspect_ratio = 133; + break; + case 3: + if (pr) + printk("Videostream: ASPECT: 16:9"); + vi->aspect_ratio = 177; + break; + case 4: + if (pr) + printk("Videostream: ASPECT: 2.21:1"); + vi->aspect_ratio = 221; + break; + + case 5 ... 15: + if (pr) + printk("Videostream: ASPECT: reserved"); + vi->aspect_ratio = 0; + break; + + default: + vi->aspect_ratio = 0; + return -1; + } + + if (pr) + printk(" Size = %dx%d",vi->horizontal_size,vi->vertical_size); + + sw = (int)(headr[3]&0x0F); + + switch ( sw ) { + case 1: + if (pr) + printk(" FRate: 23.976 fps"); + vi->framerate = 23976; + form = -1; + break; + case 2: + if (pr) + printk(" FRate: 24 fps"); + vi->framerate = 24000; + form = -1; + break; + case 3: + if (pr) + printk(" FRate: 25 fps"); + vi->framerate = 25000; + form = VIDEO_MODE_PAL; + break; + case 4: + if (pr) + printk(" FRate: 29.97 fps"); + vi->framerate = 29970; + form = VIDEO_MODE_NTSC; + break; + case 5: + if (pr) + printk(" FRate: 30 fps"); + vi->framerate = 30000; + form = VIDEO_MODE_NTSC; + break; + case 6: + if (pr) + printk(" FRate: 50 fps"); + vi->framerate = 50000; + form = VIDEO_MODE_PAL; + break; + case 7: + if (pr) + printk(" FRate: 60 fps"); + vi->framerate = 60000; + form = VIDEO_MODE_NTSC; + break; + } + + vi->bit_rate = (headr[4] << 10) | (headr[5] << 2) | (headr[6] & 0x03); + + vi->vbv_buffer_size + = (( headr[6] & 0xF8) >> 3 ) | (( headr[7] & 0x1F )<< 5); + + if (pr){ + printk(" BRate: %d Mbit/s",4*(vi->bit_rate)/10000); + printk(" vbvbuffer %d",16*1024*(vi->vbv_buffer_size)); + printk("\n"); + } + + vi->video_format = form; + + return 0; +} +#endif + + +#if 0 +static int get_vinfo(u8 *mbuf, int count, struct dvb_video_info *vi, int pr) +{ + u8 *headr; + int found = 0; + int c = 0; + + while (found < 4 && c+4 < count){ + u8 *b; + + b = mbuf+c; + if ( b[0] == 0x00 && b[1] == 0x00 && b[2] == 0x01 + && b[3] == 0xb3) found = 4; + else { + c++; + } + } + + if (! found) return -1; + c += 4; + if (c+12 >= count) return -1; + headr = mbuf+c; + if (read_sequence_header(headr, vi, pr) < 0) return -1; + vi->off = c-4; + return 0; +} +#endif + + +#if 0 +static int get_ainfo(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr) +{ + u8 *headr; + int found = 0; + int c = 0; + int fr = 0; + + while (found < 2 && c < count){ + u8 b[2]; + memcpy( b, mbuf+c, 2); + + if ( b[0] == 0xff && (b[1] & 0xf8) == 0xf8) + found = 2; + else { + c++; + } + } + + if (!found) return -1; + + if (c+3 >= count) return -1; + headr = mbuf+c; + + ai->layer = (headr[1] & 0x06) >> 1; + + if (pr) + printk("Audiostream: Layer: %d", 4-ai->layer); + + + ai->bit_rate = bitrates[(3-ai->layer)][(headr[2] >> 4 )]*1000; + + if (pr){ + if (ai->bit_rate == 0) + printk(" Bit rate: free"); + else if (ai->bit_rate == 0xf) + printk(" BRate: reserved"); + else + printk(" BRate: %d kb/s", ai->bit_rate/1000); + } + + fr = (headr[2] & 0x0c ) >> 2; + ai->frequency = freq[fr]*100; + if (pr){ + if (ai->frequency == 3) + printk(" Freq: reserved\n"); + else + printk(" Freq: %d kHz\n",ai->frequency); + + } + ai->off = c; + return 0; +} +#endif + + +int dvb_filter_get_ac3info(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr) +{ + u8 *headr; + int found = 0; + int c = 0; + u8 frame = 0; + int fr = 0; + + while ( !found && c < count){ + u8 *b = mbuf+c; + + if ( b[0] == 0x0b && b[1] == 0x77 ) + found = 1; + else { + c++; + } + } + + if (!found) return -1; + if (pr) + printk("Audiostream: AC3"); + + ai->off = c; + if (c+5 >= count) return -1; + + ai->layer = 0; // 0 for AC3 + headr = mbuf+c+2; + + frame = (headr[2]&0x3f); + ai->bit_rate = ac3_bitrates[frame >> 1]*1000; + + if (pr) + printk(" BRate: %d kb/s", (int) ai->bit_rate/1000); + + ai->frequency = (headr[2] & 0xc0 ) >> 6; + fr = (headr[2] & 0xc0 ) >> 6; + ai->frequency = freq[fr]*100; + if (pr) printk (" Freq: %d Hz\n", (int) ai->frequency); + + + ai->framesize = ac3_frames[fr][frame >> 1]; + if ((frame & 1) && (fr == 1)) ai->framesize++; + ai->framesize = ai->framesize << 1; + if (pr) printk (" Framesize %d\n",(int) ai->framesize); + + + return 0; +} +EXPORT_SYMBOL(dvb_filter_get_ac3info); + + +#if 0 +static u8 *skip_pes_header(u8 **bufp) +{ + u8 *inbuf = *bufp; + u8 *buf = inbuf; + u8 *pts = NULL; + int skip = 0; + + static const int mpeg1_skip_table[16] = { + 1, 0xffff, 5, 10, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff + }; + + + if ((inbuf[6] & 0xc0) == 0x80){ /* mpeg2 */ + if (buf[7] & PTS_ONLY) + pts = buf+9; + else pts = NULL; + buf = inbuf + 9 + inbuf[8]; + } else { /* mpeg1 */ + for (buf = inbuf + 6; *buf == 0xff; buf++) + if (buf == inbuf + 6 + 16) { + break; + } + if ((*buf & 0xc0) == 0x40) + buf += 2; + skip = mpeg1_skip_table [*buf >> 4]; + if (skip == 5 || skip == 10) pts = buf; + else pts = NULL; + + buf += mpeg1_skip_table [*buf >> 4]; + } + + *bufp = buf; + return pts; +} +#endif + +#if 0 +static void initialize_quant_matrix( u32 *matrix ) +{ + int i; + + matrix[0] = 0x08101013; + matrix[1] = 0x10131616; + matrix[2] = 0x16161616; + matrix[3] = 0x1a181a1b; + matrix[4] = 0x1b1b1a1a; + matrix[5] = 0x1a1a1b1b; + matrix[6] = 0x1b1d1d1d; + matrix[7] = 0x2222221d; + matrix[8] = 0x1d1d1b1b; + matrix[9] = 0x1d1d2020; + matrix[10] = 0x22222526; + matrix[11] = 0x25232322; + matrix[12] = 0x23262628; + matrix[13] = 0x28283030; + matrix[14] = 0x2e2e3838; + matrix[15] = 0x3a454553; + + for ( i = 16 ; i < 32 ; i++ ) + matrix[i] = 0x10101010; +} +#endif + +#if 0 +static void initialize_mpg_picture(struct mpg_picture *pic) +{ + int i; + + /* set MPEG1 */ + pic->mpeg1_flag = 1; + pic->profile_and_level = 0x4A ; /* MP@LL */ + pic->progressive_sequence = 1; + pic->low_delay = 0; + + pic->sequence_display_extension_flag = 0; + for ( i = 0 ; i < 4 ; i++ ){ + pic->frame_centre_horizontal_offset[i] = 0; + pic->frame_centre_vertical_offset[i] = 0; + } + pic->last_frame_centre_horizontal_offset = 0; + pic->last_frame_centre_vertical_offset = 0; + + pic->picture_display_extension_flag[0] = 0; + pic->picture_display_extension_flag[1] = 0; + pic->sequence_header_flag = 0; + pic->gop_flag = 0; + pic->sequence_end_flag = 0; +} +#endif + +#if 0 +static void mpg_set_picture_parameter( int32_t field_type, struct mpg_picture *pic ) +{ + int16_t last_h_offset; + int16_t last_v_offset; + + int16_t *p_h_offset; + int16_t *p_v_offset; + + if ( pic->mpeg1_flag ){ + pic->picture_structure[field_type] = VIDEO_FRAME_PICTURE; + pic->top_field_first = 0; + pic->repeat_first_field = 0; + pic->progressive_frame = 1; + pic->picture_coding_parameter = 0x000010; + } + + /* Reset flag */ + pic->picture_display_extension_flag[field_type] = 0; + + last_h_offset = pic->last_frame_centre_horizontal_offset; + last_v_offset = pic->last_frame_centre_vertical_offset; + if ( field_type == FIRST_FIELD ){ + p_h_offset = pic->frame_centre_horizontal_offset; + p_v_offset = pic->frame_centre_vertical_offset; + *p_h_offset = last_h_offset; + *(p_h_offset + 1) = last_h_offset; + *(p_h_offset + 2) = last_h_offset; + *p_v_offset = last_v_offset; + *(p_v_offset + 1) = last_v_offset; + *(p_v_offset + 2) = last_v_offset; + } else { + pic->frame_centre_horizontal_offset[3] = last_h_offset; + pic->frame_centre_vertical_offset[3] = last_v_offset; + } +} +#endif + +#if 0 +static void init_mpg_picture( struct mpg_picture *pic, int chan, int32_t field_type) +{ + pic->picture_header = 0; + pic->sequence_header_data + = ( INIT_HORIZONTAL_SIZE << 20 ) + | ( INIT_VERTICAL_SIZE << 8 ) + | ( INIT_ASPECT_RATIO << 4 ) + | ( INIT_FRAME_RATE ); + pic->mpeg1_flag = 0; + pic->vinfo.horizontal_size + = INIT_DISP_HORIZONTAL_SIZE; + pic->vinfo.vertical_size + = INIT_DISP_VERTICAL_SIZE; + pic->picture_display_extension_flag[field_type] + = 0; + pic->pts_flag[field_type] = 0; + + pic->sequence_gop_header = 0; + pic->picture_header = 0; + pic->sequence_header_flag = 0; + pic->gop_flag = 0; + pic->sequence_end_flag = 0; + pic->sequence_display_extension_flag = 0; + pic->last_frame_centre_horizontal_offset = 0; + pic->last_frame_centre_vertical_offset = 0; + pic->channel = chan; +} +#endif + +void dvb_filter_pes2ts_init(struct dvb_filter_pes2ts *p2ts, unsigned short pid, + dvb_filter_pes2ts_cb_t *cb, void *priv) +{ + unsigned char *buf=p2ts->buf; + + buf[0]=0x47; + buf[1]=(pid>>8); + buf[2]=pid&0xff; + p2ts->cc=0; + p2ts->cb=cb; + p2ts->priv=priv; +} +EXPORT_SYMBOL(dvb_filter_pes2ts_init); + +int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, unsigned char *pes, + int len, int payload_start) +{ + unsigned char *buf=p2ts->buf; + int ret=0, rest; + + //len=6+((pes[4]<<8)|pes[5]); + + if (payload_start) + buf[1]|=0x40; + else + buf[1]&=~0x40; + while (len>=184) { + buf[3]=0x10|((p2ts->cc++)&0x0f); + memcpy(buf+4, pes, 184); + if ((ret=p2ts->cb(p2ts->priv, buf))) + return ret; + len-=184; pes+=184; + buf[1]&=~0x40; + } + if (!len) + return 0; + buf[3]=0x30|((p2ts->cc++)&0x0f); + rest=183-len; + if (rest) { + buf[5]=0x00; + if (rest-1) + memset(buf+6, 0xff, rest-1); + } + buf[4]=rest; + memcpy(buf+5+rest, pes, len); + return p2ts->cb(p2ts->priv, buf); +} +EXPORT_SYMBOL(dvb_filter_pes2ts); diff --git a/drivers/media/dvb-core/dvb_filter.h b/drivers/media/dvb-core/dvb_filter.h new file mode 100644 index 00000000..375e3be1 --- /dev/null +++ b/drivers/media/dvb-core/dvb_filter.h @@ -0,0 +1,246 @@ +/* + * dvb_filter.h + * + * Copyright (C) 2003 Convergence GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DVB_FILTER_H_ +#define _DVB_FILTER_H_ + +#include + +#include "demux.h" + +typedef int (dvb_filter_pes2ts_cb_t) (void *, unsigned char *); + +struct dvb_filter_pes2ts { + unsigned char buf[188]; + unsigned char cc; + dvb_filter_pes2ts_cb_t *cb; + void *priv; +}; + +void dvb_filter_pes2ts_init(struct dvb_filter_pes2ts *p2ts, unsigned short pid, + dvb_filter_pes2ts_cb_t *cb, void *priv); + +int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, unsigned char *pes, + int len, int payload_start); + + +#define PROG_STREAM_MAP 0xBC +#define PRIVATE_STREAM1 0xBD +#define PADDING_STREAM 0xBE +#define PRIVATE_STREAM2 0xBF +#define AUDIO_STREAM_S 0xC0 +#define AUDIO_STREAM_E 0xDF +#define VIDEO_STREAM_S 0xE0 +#define VIDEO_STREAM_E 0xEF +#define ECM_STREAM 0xF0 +#define EMM_STREAM 0xF1 +#define DSM_CC_STREAM 0xF2 +#define ISO13522_STREAM 0xF3 +#define PROG_STREAM_DIR 0xFF + +#define DVB_PICTURE_START 0x00 +#define DVB_USER_START 0xb2 +#define DVB_SEQUENCE_HEADER 0xb3 +#define DVB_SEQUENCE_ERROR 0xb4 +#define DVB_EXTENSION_START 0xb5 +#define DVB_SEQUENCE_END 0xb7 +#define DVB_GOP_START 0xb8 +#define DVB_EXCEPT_SLICE 0xb0 + +#define SEQUENCE_EXTENSION 0x01 +#define SEQUENCE_DISPLAY_EXTENSION 0x02 +#define PICTURE_CODING_EXTENSION 0x08 +#define QUANT_MATRIX_EXTENSION 0x03 +#define PICTURE_DISPLAY_EXTENSION 0x07 + +#define I_FRAME 0x01 +#define B_FRAME 0x02 +#define P_FRAME 0x03 + +/* Initialize sequence_data */ +#define INIT_HORIZONTAL_SIZE 720 +#define INIT_VERTICAL_SIZE 576 +#define INIT_ASPECT_RATIO 0x02 +#define INIT_FRAME_RATE 0x03 +#define INIT_DISP_HORIZONTAL_SIZE 540 +#define INIT_DISP_VERTICAL_SIZE 576 + + +//flags2 +#define PTS_DTS_FLAGS 0xC0 +#define ESCR_FLAG 0x20 +#define ES_RATE_FLAG 0x10 +#define DSM_TRICK_FLAG 0x08 +#define ADD_CPY_FLAG 0x04 +#define PES_CRC_FLAG 0x02 +#define PES_EXT_FLAG 0x01 + +//pts_dts flags +#define PTS_ONLY 0x80 +#define PTS_DTS 0xC0 + +#define TS_SIZE 188 +#define TRANS_ERROR 0x80 +#define PAY_START 0x40 +#define TRANS_PRIO 0x20 +#define PID_MASK_HI 0x1F +//flags +#define TRANS_SCRMBL1 0x80 +#define TRANS_SCRMBL2 0x40 +#define ADAPT_FIELD 0x20 +#define PAYLOAD 0x10 +#define COUNT_MASK 0x0F + +// adaptation flags +#define DISCON_IND 0x80 +#define RAND_ACC_IND 0x40 +#define ES_PRI_IND 0x20 +#define PCR_FLAG 0x10 +#define OPCR_FLAG 0x08 +#define SPLICE_FLAG 0x04 +#define TRANS_PRIV 0x02 +#define ADAP_EXT_FLAG 0x01 + +// adaptation extension flags +#define LTW_FLAG 0x80 +#define PIECE_RATE 0x40 +#define SEAM_SPLICE 0x20 + + +#define MAX_PLENGTH 0xFFFF +#define MMAX_PLENGTH (256*MAX_PLENGTH) + +#ifndef IPACKS +#define IPACKS 2048 +#endif + +struct ipack { + int size; + int found; + u8 *buf; + u8 cid; + u32 plength; + u8 plen[2]; + u8 flag1; + u8 flag2; + u8 hlength; + u8 pts[5]; + u16 *pid; + int mpeg; + u8 check; + int which; + int done; + void *data; + void (*func)(u8 *buf, int size, void *priv); + int count; + int repack_subids; +}; + +struct dvb_video_info { + u32 horizontal_size; + u32 vertical_size; + u32 aspect_ratio; + u32 framerate; + u32 video_format; + u32 bit_rate; + u32 comp_bit_rate; + u32 vbv_buffer_size; + s16 vbv_delay; + u32 CSPF; + u32 off; +}; + +#define OFF_SIZE 4 +#define FIRST_FIELD 0 +#define SECOND_FIELD 1 +#define VIDEO_FRAME_PICTURE 0x03 + +struct mpg_picture { + int channel; + struct dvb_video_info vinfo; + u32 *sequence_gop_header; + u32 *picture_header; + s32 time_code; + int low_delay; + int closed_gop; + int broken_link; + int sequence_header_flag; + int gop_flag; + int sequence_end_flag; + + u8 profile_and_level; + s32 picture_coding_parameter; + u32 matrix[32]; + s8 matrix_change_flag; + + u8 picture_header_parameter; + /* bit 0 - 2: bwd f code + bit 3 : fpb vector + bit 4 - 6: fwd f code + bit 7 : fpf vector */ + + int mpeg1_flag; + int progressive_sequence; + int sequence_display_extension_flag; + u32 sequence_header_data; + s16 last_frame_centre_horizontal_offset; + s16 last_frame_centre_vertical_offset; + + u32 pts[2]; /* [0] 1st field, [1] 2nd field */ + int top_field_first; + int repeat_first_field; + int progressive_frame; + int bank; + int forward_bank; + int backward_bank; + int compress; + s16 frame_centre_horizontal_offset[OFF_SIZE]; + /* [0-2] 1st field, [3] 2nd field */ + s16 frame_centre_vertical_offset[OFF_SIZE]; + /* [0-2] 1st field, [3] 2nd field */ + s16 temporal_reference[2]; + /* [0] 1st field, [1] 2nd field */ + + s8 picture_coding_type[2]; + /* [0] 1st field, [1] 2nd field */ + s8 picture_structure[2]; + /* [0] 1st field, [1] 2nd field */ + s8 picture_display_extension_flag[2]; + /* [0] 1st field, [1] 2nd field */ + /* picture_display_extenion() 0:no 1:exit*/ + s8 pts_flag[2]; + /* [0] 1st field, [1] 2nd field */ +}; + +struct dvb_audio_info { + int layer; + u32 bit_rate; + u32 frequency; + u32 mode; + u32 mode_extension ; + u32 emphasis; + u32 framesize; + u32 off; +}; + +int dvb_filter_get_ac3info(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr); + + +#endif diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c new file mode 100644 index 00000000..1f925e85 --- /dev/null +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -0,0 +1,2696 @@ +/* + * dvb_frontend.c: DVB frontend tuning interface/thread + * + * + * Copyright (C) 1999-2001 Ralph Metzler + * Marcus Metzler + * Holger Waechtler + * for convergence integrated media GmbH + * + * Copyright (C) 2004 Andrew de Quincey (tuning thread cleanup) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +/* Enables DVBv3 compatibility bits at the headers */ +#define __DVB_CORE__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "dvbdev.h" +#include + +static int dvb_frontend_debug; +static int dvb_shutdown_timeout; +static int dvb_force_auto_inversion; +static int dvb_override_tune_delay; +static int dvb_powerdown_on_sleep = 1; +static int dvb_mfe_wait_time = 5; + +module_param_named(frontend_debug, dvb_frontend_debug, int, 0644); +MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off)."); +module_param(dvb_shutdown_timeout, int, 0644); +MODULE_PARM_DESC(dvb_shutdown_timeout, "wait seconds after close() before suspending hardware"); +module_param(dvb_force_auto_inversion, int, 0644); +MODULE_PARM_DESC(dvb_force_auto_inversion, "0: normal (default), 1: INVERSION_AUTO forced always"); +module_param(dvb_override_tune_delay, int, 0644); +MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt"); +module_param(dvb_powerdown_on_sleep, int, 0644); +MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB voltage off on sleep (default)"); +module_param(dvb_mfe_wait_time, int, 0644); +MODULE_PARM_DESC(dvb_mfe_wait_time, "Wait up to seconds on open() for multi-frontend to become available (default:5 seconds)"); + +#define FESTATE_IDLE 1 +#define FESTATE_RETUNE 2 +#define FESTATE_TUNING_FAST 4 +#define FESTATE_TUNING_SLOW 8 +#define FESTATE_TUNED 16 +#define FESTATE_ZIGZAG_FAST 32 +#define FESTATE_ZIGZAG_SLOW 64 +#define FESTATE_DISEQC 128 +#define FESTATE_ERROR 256 +#define FESTATE_WAITFORLOCK (FESTATE_TUNING_FAST | FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW | FESTATE_DISEQC) +#define FESTATE_SEARCHING_FAST (FESTATE_TUNING_FAST | FESTATE_ZIGZAG_FAST) +#define FESTATE_SEARCHING_SLOW (FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_SLOW) +#define FESTATE_LOSTLOCK (FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW) + +#define FE_ALGO_HW 1 +/* + * FESTATE_IDLE. No tuning parameters have been supplied and the loop is idling. + * FESTATE_RETUNE. Parameters have been supplied, but we have not yet performed the first tune. + * FESTATE_TUNING_FAST. Tuning parameters have been supplied and fast zigzag scan is in progress. + * FESTATE_TUNING_SLOW. Tuning parameters have been supplied. Fast zigzag failed, so we're trying again, but slower. + * FESTATE_TUNED. The frontend has successfully locked on. + * FESTATE_ZIGZAG_FAST. The lock has been lost, and a fast zigzag has been initiated to try and regain it. + * FESTATE_ZIGZAG_SLOW. The lock has been lost. Fast zigzag has been failed, so we're trying again, but slower. + * FESTATE_DISEQC. A DISEQC command has just been issued. + * FESTATE_WAITFORLOCK. When we're waiting for a lock. + * FESTATE_SEARCHING_FAST. When we're searching for a signal using a fast zigzag scan. + * FESTATE_SEARCHING_SLOW. When we're searching for a signal using a slow zigzag scan. + * FESTATE_LOSTLOCK. When the lock has been lost, and we're searching it again. + */ + +#define DVB_FE_NO_EXIT 0 +#define DVB_FE_NORMAL_EXIT 1 +#define DVB_FE_DEVICE_REMOVED 2 + +static DEFINE_MUTEX(frontend_mutex); + +struct dvb_frontend_private { + + /* thread/frontend values */ + struct dvb_device *dvbdev; + struct dvb_frontend_parameters parameters_out; + struct dvb_fe_events events; + struct semaphore sem; + struct list_head list_head; + wait_queue_head_t wait_queue; + struct task_struct *thread; + unsigned long release_jiffies; + unsigned int exit; + unsigned int wakeup; + fe_status_t status; + unsigned long tune_mode_flags; + unsigned int delay; + unsigned int reinitialise; + int tone; + int voltage; + + /* swzigzag values */ + unsigned int state; + unsigned int bending; + int lnb_drift; + unsigned int inversion; + unsigned int auto_step; + unsigned int auto_sub_step; + unsigned int started_auto_step; + unsigned int min_delay; + unsigned int max_drift; + unsigned int step_size; + int quality; + unsigned int check_wrapped; + enum dvbfe_search algo_status; +}; + +static void dvb_frontend_wakeup(struct dvb_frontend *fe); +static int dtv_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p_out); +static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p); + +static bool has_get_frontend(struct dvb_frontend *fe) +{ + return fe->ops.get_frontend != NULL; +} + +/* + * Due to DVBv3 API calls, a delivery system should be mapped into one of + * the 4 DVBv3 delivery systems (FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC), + * otherwise, a DVBv3 call will fail. + */ +enum dvbv3_emulation_type { + DVBV3_UNKNOWN, + DVBV3_QPSK, + DVBV3_QAM, + DVBV3_OFDM, + DVBV3_ATSC, +}; + +static enum dvbv3_emulation_type dvbv3_type(u32 delivery_system) +{ + switch (delivery_system) { + case SYS_DVBC_ANNEX_A: + case SYS_DVBC_ANNEX_C: + return DVBV3_QAM; + case SYS_DVBS: + case SYS_DVBS2: + case SYS_TURBO: + case SYS_ISDBS: + case SYS_DSS: + return DVBV3_QPSK; + case SYS_DVBT: + case SYS_DVBT2: + case SYS_ISDBT: + case SYS_DTMB: + return DVBV3_OFDM; + case SYS_ATSC: + case SYS_ATSCMH: + case SYS_DVBC_ANNEX_B: + return DVBV3_ATSC; + case SYS_UNDEFINED: + case SYS_ISDBC: + case SYS_DVBH: + case SYS_DAB: + default: + /* + * Doesn't know how to emulate those types and/or + * there's no frontend driver from this type yet + * with some emulation code, so, we're not sure yet how + * to handle them, or they're not compatible with a DVBv3 call. + */ + return DVBV3_UNKNOWN; + } +} + +static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_fe_events *events = &fepriv->events; + struct dvb_frontend_event *e; + int wp; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + if ((status & FE_HAS_LOCK) && has_get_frontend(fe)) + dtv_get_frontend(fe, &fepriv->parameters_out); + + mutex_lock(&events->mtx); + + wp = (events->eventw + 1) % MAX_EVENT; + if (wp == events->eventr) { + events->overflow = 1; + events->eventr = (events->eventr + 1) % MAX_EVENT; + } + + e = &events->events[events->eventw]; + e->status = status; + e->parameters = fepriv->parameters_out; + + events->eventw = wp; + + mutex_unlock(&events->mtx); + + wake_up_interruptible (&events->wait_queue); +} + +static int dvb_frontend_get_event(struct dvb_frontend *fe, + struct dvb_frontend_event *event, int flags) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_fe_events *events = &fepriv->events; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + if (events->overflow) { + events->overflow = 0; + return -EOVERFLOW; + } + + if (events->eventw == events->eventr) { + int ret; + + if (flags & O_NONBLOCK) + return -EWOULDBLOCK; + + up(&fepriv->sem); + + ret = wait_event_interruptible (events->wait_queue, + events->eventw != events->eventr); + + if (down_interruptible (&fepriv->sem)) + return -ERESTARTSYS; + + if (ret < 0) + return ret; + } + + mutex_lock(&events->mtx); + *event = events->events[events->eventr]; + events->eventr = (events->eventr + 1) % MAX_EVENT; + mutex_unlock(&events->mtx); + + return 0; +} + +static void dvb_frontend_clear_events(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_fe_events *events = &fepriv->events; + + mutex_lock(&events->mtx); + events->eventr = events->eventw; + mutex_unlock(&events->mtx); +} + +static void dvb_frontend_init(struct dvb_frontend *fe) +{ + dev_dbg(fe->dvb->device, + "%s: initialising adapter %i frontend %i (%s)...\n", + __func__, fe->dvb->num, fe->id, fe->ops.info.name); + + if (fe->ops.init) + fe->ops.init(fe); + if (fe->ops.tuner_ops.init) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + fe->ops.tuner_ops.init(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } +} + +void dvb_frontend_reinitialise(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + + fepriv->reinitialise = 1; + dvb_frontend_wakeup(fe); +} +EXPORT_SYMBOL(dvb_frontend_reinitialise); + +static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepriv, int locked) +{ + int q2; + struct dvb_frontend *fe = fepriv->dvbdev->priv; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + if (locked) + (fepriv->quality) = (fepriv->quality * 220 + 36*256) / 256; + else + (fepriv->quality) = (fepriv->quality * 220 + 0) / 256; + + q2 = fepriv->quality - 128; + q2 *= q2; + + fepriv->delay = fepriv->min_delay + q2 * HZ / (128*128); +} + +/** + * Performs automatic twiddling of frontend parameters. + * + * @param fe The frontend concerned. + * @param check_wrapped Checks if an iteration has completed. DO NOT SET ON THE FIRST ATTEMPT + * @returns Number of complete iterations that have been performed. + */ +static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wrapped) +{ + int autoinversion; + int ready = 0; + int fe_set_err = 0; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp; + int original_inversion = c->inversion; + u32 original_frequency = c->frequency; + + /* are we using autoinversion? */ + autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) && + (c->inversion == INVERSION_AUTO)); + + /* setup parameters correctly */ + while(!ready) { + /* calculate the lnb_drift */ + fepriv->lnb_drift = fepriv->auto_step * fepriv->step_size; + + /* wrap the auto_step if we've exceeded the maximum drift */ + if (fepriv->lnb_drift > fepriv->max_drift) { + fepriv->auto_step = 0; + fepriv->auto_sub_step = 0; + fepriv->lnb_drift = 0; + } + + /* perform inversion and +/- zigzag */ + switch(fepriv->auto_sub_step) { + case 0: + /* try with the current inversion and current drift setting */ + ready = 1; + break; + + case 1: + if (!autoinversion) break; + + fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF; + ready = 1; + break; + + case 2: + if (fepriv->lnb_drift == 0) break; + + fepriv->lnb_drift = -fepriv->lnb_drift; + ready = 1; + break; + + case 3: + if (fepriv->lnb_drift == 0) break; + if (!autoinversion) break; + + fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF; + fepriv->lnb_drift = -fepriv->lnb_drift; + ready = 1; + break; + + default: + fepriv->auto_step++; + fepriv->auto_sub_step = -1; /* it'll be incremented to 0 in a moment */ + break; + } + + if (!ready) fepriv->auto_sub_step++; + } + + /* if this attempt would hit where we started, indicate a complete + * iteration has occurred */ + if ((fepriv->auto_step == fepriv->started_auto_step) && + (fepriv->auto_sub_step == 0) && check_wrapped) { + return 1; + } + + dev_dbg(fe->dvb->device, "%s: drift:%i inversion:%i auto_step:%i " \ + "auto_sub_step:%i started_auto_step:%i\n", + __func__, fepriv->lnb_drift, fepriv->inversion, + fepriv->auto_step, fepriv->auto_sub_step, + fepriv->started_auto_step); + + /* set the frontend itself */ + c->frequency += fepriv->lnb_drift; + if (autoinversion) + c->inversion = fepriv->inversion; + tmp = *c; + if (fe->ops.set_frontend) + fe_set_err = fe->ops.set_frontend(fe); + *c = tmp; + if (fe_set_err < 0) { + fepriv->state = FESTATE_ERROR; + return fe_set_err; + } + + c->frequency = original_frequency; + c->inversion = original_inversion; + + fepriv->auto_sub_step++; + return 0; +} + +static void dvb_frontend_swzigzag(struct dvb_frontend *fe) +{ + fe_status_t s = 0; + int retval = 0; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp; + + /* if we've got no parameters, just keep idling */ + if (fepriv->state & FESTATE_IDLE) { + fepriv->delay = 3*HZ; + fepriv->quality = 0; + return; + } + + /* in SCAN mode, we just set the frontend when asked and leave it alone */ + if (fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT) { + if (fepriv->state & FESTATE_RETUNE) { + tmp = *c; + if (fe->ops.set_frontend) + retval = fe->ops.set_frontend(fe); + *c = tmp; + if (retval < 0) + fepriv->state = FESTATE_ERROR; + else + fepriv->state = FESTATE_TUNED; + } + fepriv->delay = 3*HZ; + fepriv->quality = 0; + return; + } + + /* get the frontend status */ + if (fepriv->state & FESTATE_RETUNE) { + s = 0; + } else { + if (fe->ops.read_status) + fe->ops.read_status(fe, &s); + if (s != fepriv->status) { + dvb_frontend_add_event(fe, s); + fepriv->status = s; + } + } + + /* if we're not tuned, and we have a lock, move to the TUNED state */ + if ((fepriv->state & FESTATE_WAITFORLOCK) && (s & FE_HAS_LOCK)) { + dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); + fepriv->state = FESTATE_TUNED; + + /* if we're tuned, then we have determined the correct inversion */ + if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) && + (c->inversion == INVERSION_AUTO)) { + c->inversion = fepriv->inversion; + } + return; + } + + /* if we are tuned already, check we're still locked */ + if (fepriv->state & FESTATE_TUNED) { + dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); + + /* we're tuned, and the lock is still good... */ + if (s & FE_HAS_LOCK) { + return; + } else { /* if we _WERE_ tuned, but now don't have a lock */ + fepriv->state = FESTATE_ZIGZAG_FAST; + fepriv->started_auto_step = fepriv->auto_step; + fepriv->check_wrapped = 0; + } + } + + /* don't actually do anything if we're in the LOSTLOCK state, + * the frontend is set to FE_CAN_RECOVER, and the max_drift is 0 */ + if ((fepriv->state & FESTATE_LOSTLOCK) && + (fe->ops.info.caps & FE_CAN_RECOVER) && (fepriv->max_drift == 0)) { + dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); + return; + } + + /* don't do anything if we're in the DISEQC state, since this + * might be someone with a motorized dish controlled by DISEQC. + * If its actually a re-tune, there will be a SET_FRONTEND soon enough. */ + if (fepriv->state & FESTATE_DISEQC) { + dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); + return; + } + + /* if we're in the RETUNE state, set everything up for a brand + * new scan, keeping the current inversion setting, as the next + * tune is _very_ likely to require the same */ + if (fepriv->state & FESTATE_RETUNE) { + fepriv->lnb_drift = 0; + fepriv->auto_step = 0; + fepriv->auto_sub_step = 0; + fepriv->started_auto_step = 0; + fepriv->check_wrapped = 0; + } + + /* fast zigzag. */ + if ((fepriv->state & FESTATE_SEARCHING_FAST) || (fepriv->state & FESTATE_RETUNE)) { + fepriv->delay = fepriv->min_delay; + + /* perform a tune */ + retval = dvb_frontend_swzigzag_autotune(fe, + fepriv->check_wrapped); + if (retval < 0) { + return; + } else if (retval) { + /* OK, if we've run out of trials at the fast speed. + * Drop back to slow for the _next_ attempt */ + fepriv->state = FESTATE_SEARCHING_SLOW; + fepriv->started_auto_step = fepriv->auto_step; + return; + } + fepriv->check_wrapped = 1; + + /* if we've just retuned, enter the ZIGZAG_FAST state. + * This ensures we cannot return from an + * FE_SET_FRONTEND ioctl before the first frontend tune + * occurs */ + if (fepriv->state & FESTATE_RETUNE) { + fepriv->state = FESTATE_TUNING_FAST; + } + } + + /* slow zigzag */ + if (fepriv->state & FESTATE_SEARCHING_SLOW) { + dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); + + /* Note: don't bother checking for wrapping; we stay in this + * state until we get a lock */ + dvb_frontend_swzigzag_autotune(fe, 0); + } +} + +static int dvb_frontend_is_exiting(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + + if (fepriv->exit != DVB_FE_NO_EXIT) + return 1; + + if (fepriv->dvbdev->writers == 1) + if (time_after_eq(jiffies, fepriv->release_jiffies + + dvb_shutdown_timeout * HZ)) + return 1; + + return 0; +} + +static int dvb_frontend_should_wakeup(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + + if (fepriv->wakeup) { + fepriv->wakeup = 0; + return 1; + } + return dvb_frontend_is_exiting(fe); +} + +static void dvb_frontend_wakeup(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + + fepriv->wakeup = 1; + wake_up_interruptible(&fepriv->wait_queue); +} + +static int dvb_frontend_thread(void *data) +{ + struct dvb_frontend *fe = data; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + fe_status_t s; + enum dvbfe_algo algo; + + bool re_tune = false; + bool semheld = false; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + fepriv->check_wrapped = 0; + fepriv->quality = 0; + fepriv->delay = 3*HZ; + fepriv->status = 0; + fepriv->wakeup = 0; + fepriv->reinitialise = 0; + + dvb_frontend_init(fe); + + set_freezable(); + while (1) { + up(&fepriv->sem); /* is locked when we enter the thread... */ +restart: + wait_event_interruptible_timeout(fepriv->wait_queue, + dvb_frontend_should_wakeup(fe) || kthread_should_stop() + || freezing(current), + fepriv->delay); + + if (kthread_should_stop() || dvb_frontend_is_exiting(fe)) { + /* got signal or quitting */ + if (!down_interruptible(&fepriv->sem)) + semheld = true; + fepriv->exit = DVB_FE_NORMAL_EXIT; + break; + } + + if (try_to_freeze()) + goto restart; + + if (down_interruptible(&fepriv->sem)) + break; + + if (fepriv->reinitialise) { + dvb_frontend_init(fe); + if (fe->ops.set_tone && fepriv->tone != -1) + fe->ops.set_tone(fe, fepriv->tone); + if (fe->ops.set_voltage && fepriv->voltage != -1) + fe->ops.set_voltage(fe, fepriv->voltage); + fepriv->reinitialise = 0; + } + + /* do an iteration of the tuning loop */ + if (fe->ops.get_frontend_algo) { + algo = fe->ops.get_frontend_algo(fe); + switch (algo) { + case DVBFE_ALGO_HW: + dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_HW\n", __func__); + + if (fepriv->state & FESTATE_RETUNE) { + dev_dbg(fe->dvb->device, "%s: Retune requested, FESTATE_RETUNE\n", __func__); + re_tune = true; + fepriv->state = FESTATE_TUNED; + } else { + re_tune = false; + } + + if (fe->ops.tune) + fe->ops.tune(fe, re_tune, fepriv->tune_mode_flags, &fepriv->delay, &s); + + if (s != fepriv->status && !(fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT)) { + dev_dbg(fe->dvb->device, "%s: state changed, adding current state\n", __func__); + dvb_frontend_add_event(fe, s); + fepriv->status = s; + } + break; + case DVBFE_ALGO_SW: + dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_SW\n", __func__); + dvb_frontend_swzigzag(fe); + break; + case DVBFE_ALGO_CUSTOM: + dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_CUSTOM, state=%d\n", __func__, fepriv->state); + if (fepriv->state & FESTATE_RETUNE) { + dev_dbg(fe->dvb->device, "%s: Retune requested, FESTAT_RETUNE\n", __func__); + fepriv->state = FESTATE_TUNED; + } + /* Case where we are going to search for a carrier + * User asked us to retune again for some reason, possibly + * requesting a search with a new set of parameters + */ + if (fepriv->algo_status & DVBFE_ALGO_SEARCH_AGAIN) { + if (fe->ops.search) { + fepriv->algo_status = fe->ops.search(fe); + /* We did do a search as was requested, the flags are + * now unset as well and has the flags wrt to search. + */ + } else { + fepriv->algo_status &= ~DVBFE_ALGO_SEARCH_AGAIN; + } + } + /* Track the carrier if the search was successful */ + if (fepriv->algo_status != DVBFE_ALGO_SEARCH_SUCCESS) { + fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; + fepriv->delay = HZ / 2; + } + dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); + fe->ops.read_status(fe, &s); + if (s != fepriv->status) { + dvb_frontend_add_event(fe, s); /* update event list */ + fepriv->status = s; + if (!(s & FE_HAS_LOCK)) { + fepriv->delay = HZ / 10; + fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; + } else { + fepriv->delay = 60 * HZ; + } + } + break; + default: + dev_dbg(fe->dvb->device, "%s: UNDEFINED ALGO !\n", __func__); + break; + } + } else { + dvb_frontend_swzigzag(fe); + } + } + + if (dvb_powerdown_on_sleep) { + if (fe->ops.set_voltage) + fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF); + if (fe->ops.tuner_ops.sleep) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + fe->ops.tuner_ops.sleep(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + if (fe->ops.sleep) + fe->ops.sleep(fe); + } + + fepriv->thread = NULL; + if (kthread_should_stop()) + fepriv->exit = DVB_FE_DEVICE_REMOVED; + else + fepriv->exit = DVB_FE_NO_EXIT; + mb(); + + if (semheld) + up(&fepriv->sem); + dvb_frontend_wakeup(fe); + return 0; +} + +static void dvb_frontend_stop(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + fepriv->exit = DVB_FE_NORMAL_EXIT; + mb(); + + if (!fepriv->thread) + return; + + kthread_stop(fepriv->thread); + + sema_init(&fepriv->sem, 1); + fepriv->state = FESTATE_IDLE; + + /* paranoia check in case a signal arrived */ + if (fepriv->thread) + dev_warn(fe->dvb->device, + "dvb_frontend_stop: warning: thread %p won't exit\n", + fepriv->thread); +} + +s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime) +{ + return ((curtime.tv_usec < lasttime.tv_usec) ? + 1000000 - lasttime.tv_usec + curtime.tv_usec : + curtime.tv_usec - lasttime.tv_usec); +} +EXPORT_SYMBOL(timeval_usec_diff); + +static inline void timeval_usec_add(struct timeval *curtime, u32 add_usec) +{ + curtime->tv_usec += add_usec; + if (curtime->tv_usec >= 1000000) { + curtime->tv_usec -= 1000000; + curtime->tv_sec++; + } +} + +/* + * Sleep until gettimeofday() > waketime + add_usec + * This needs to be as precise as possible, but as the delay is + * usually between 2ms and 32ms, it is done using a scheduled msleep + * followed by usleep (normally a busy-wait loop) for the remainder + */ +void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec) +{ + struct timeval lasttime; + s32 delta, newdelta; + + timeval_usec_add(waketime, add_usec); + + do_gettimeofday(&lasttime); + delta = timeval_usec_diff(lasttime, *waketime); + if (delta > 2500) { + msleep((delta - 1500) / 1000); + do_gettimeofday(&lasttime); + newdelta = timeval_usec_diff(lasttime, *waketime); + delta = (newdelta > delta) ? 0 : newdelta; + } + if (delta > 0) + udelay(delta); +} +EXPORT_SYMBOL(dvb_frontend_sleep_until); + +static int dvb_frontend_start(struct dvb_frontend *fe) +{ + int ret; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct task_struct *fe_thread; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + if (fepriv->thread) { + if (fepriv->exit == DVB_FE_NO_EXIT) + return 0; + else + dvb_frontend_stop (fe); + } + + if (signal_pending(current)) + return -EINTR; + if (down_interruptible (&fepriv->sem)) + return -EINTR; + + fepriv->state = FESTATE_IDLE; + fepriv->exit = DVB_FE_NO_EXIT; + fepriv->thread = NULL; + mb(); + + fe_thread = kthread_run(dvb_frontend_thread, fe, + "kdvb-ad-%i-fe-%i", fe->dvb->num,fe->id); + if (IS_ERR(fe_thread)) { + ret = PTR_ERR(fe_thread); + dev_warn(fe->dvb->device, + "dvb_frontend_start: failed to start kthread (%d)\n", + ret); + up(&fepriv->sem); + return ret; + } + fepriv->thread = fe_thread; + return 0; +} + +static void dvb_frontend_get_frequency_limits(struct dvb_frontend *fe, + u32 *freq_min, u32 *freq_max) +{ + *freq_min = max(fe->ops.info.frequency_min, fe->ops.tuner_ops.info.frequency_min); + + if (fe->ops.info.frequency_max == 0) + *freq_max = fe->ops.tuner_ops.info.frequency_max; + else if (fe->ops.tuner_ops.info.frequency_max == 0) + *freq_max = fe->ops.info.frequency_max; + else + *freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max); + + if (*freq_min == 0 || *freq_max == 0) + dev_warn(fe->dvb->device, "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n", + fe->dvb->num, fe->id); +} + +static int dvb_frontend_check_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 freq_min; + u32 freq_max; + + /* range check: frequency */ + dvb_frontend_get_frequency_limits(fe, &freq_min, &freq_max); + if ((freq_min && c->frequency < freq_min) || + (freq_max && c->frequency > freq_max)) { + dev_warn(fe->dvb->device, "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, c->frequency, + freq_min, freq_max); + return -EINVAL; + } + + /* range check: symbol rate */ + switch (c->delivery_system) { + case SYS_DVBS: + case SYS_DVBS2: + case SYS_TURBO: + case SYS_DVBC_ANNEX_A: + case SYS_DVBC_ANNEX_C: + if ((fe->ops.info.symbol_rate_min && + c->symbol_rate < fe->ops.info.symbol_rate_min) || + (fe->ops.info.symbol_rate_max && + c->symbol_rate > fe->ops.info.symbol_rate_max)) { + dev_warn(fe->dvb->device, "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, c->symbol_rate, + fe->ops.info.symbol_rate_min, + fe->ops.info.symbol_rate_max); + return -EINVAL; + } + default: + break; + } + + return 0; +} + +static int dvb_frontend_clear_cache(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int i; + u32 delsys; + + delsys = c->delivery_system; + memset(c, 0, offsetof(struct dtv_frontend_properties, strength)); + c->delivery_system = delsys; + + c->state = DTV_CLEAR; + + dev_dbg(fe->dvb->device, "%s: Clearing cache for delivery system %d\n", + __func__, c->delivery_system); + + c->transmission_mode = TRANSMISSION_MODE_AUTO; + c->bandwidth_hz = 0; /* AUTO */ + c->guard_interval = GUARD_INTERVAL_AUTO; + c->hierarchy = HIERARCHY_AUTO; + c->symbol_rate = 0; + c->code_rate_HP = FEC_AUTO; + c->code_rate_LP = FEC_AUTO; + c->fec_inner = FEC_AUTO; + c->rolloff = ROLLOFF_AUTO; + c->voltage = SEC_VOLTAGE_OFF; + c->sectone = SEC_TONE_OFF; + c->pilot = PILOT_AUTO; + + c->isdbt_partial_reception = 0; + c->isdbt_sb_mode = 0; + c->isdbt_sb_subchannel = 0; + c->isdbt_sb_segment_idx = 0; + c->isdbt_sb_segment_count = 0; + c->isdbt_layer_enabled = 0; + for (i = 0; i < 3; i++) { + c->layer[i].fec = FEC_AUTO; + c->layer[i].modulation = QAM_AUTO; + c->layer[i].interleaving = 0; + c->layer[i].segment_count = 0; + } + + c->stream_id = NO_STREAM_ID_FILTER; + + switch (c->delivery_system) { + case SYS_DVBS: + case SYS_DVBS2: + case SYS_TURBO: + c->modulation = QPSK; /* implied for DVB-S in legacy API */ + c->rolloff = ROLLOFF_35;/* implied for DVB-S */ + break; + case SYS_ATSC: + c->modulation = VSB_8; + break; + default: + c->modulation = QAM_AUTO; + break; + } + + c->lna = LNA_AUTO; + + return 0; +} + +#define _DTV_CMD(n, s, b) \ +[n] = { \ + .name = #n, \ + .cmd = n, \ + .set = s,\ + .buffer = b \ +} + +static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = { + _DTV_CMD(DTV_TUNE, 1, 0), + _DTV_CMD(DTV_CLEAR, 1, 0), + + /* Set */ + _DTV_CMD(DTV_FREQUENCY, 1, 0), + _DTV_CMD(DTV_BANDWIDTH_HZ, 1, 0), + _DTV_CMD(DTV_MODULATION, 1, 0), + _DTV_CMD(DTV_INVERSION, 1, 0), + _DTV_CMD(DTV_DISEQC_MASTER, 1, 1), + _DTV_CMD(DTV_SYMBOL_RATE, 1, 0), + _DTV_CMD(DTV_INNER_FEC, 1, 0), + _DTV_CMD(DTV_VOLTAGE, 1, 0), + _DTV_CMD(DTV_TONE, 1, 0), + _DTV_CMD(DTV_PILOT, 1, 0), + _DTV_CMD(DTV_ROLLOFF, 1, 0), + _DTV_CMD(DTV_DELIVERY_SYSTEM, 1, 0), + _DTV_CMD(DTV_HIERARCHY, 1, 0), + _DTV_CMD(DTV_CODE_RATE_HP, 1, 0), + _DTV_CMD(DTV_CODE_RATE_LP, 1, 0), + _DTV_CMD(DTV_GUARD_INTERVAL, 1, 0), + _DTV_CMD(DTV_TRANSMISSION_MODE, 1, 0), + _DTV_CMD(DTV_INTERLEAVING, 1, 0), + + _DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0), + _DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0), + _DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 1, 0), + _DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 1, 0), + _DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_FEC, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_FEC, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_FEC, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0), + + _DTV_CMD(DTV_STREAM_ID, 1, 0), + _DTV_CMD(DTV_DVBT2_PLP_ID_LEGACY, 1, 0), + _DTV_CMD(DTV_LNA, 1, 0), + + /* Get */ + _DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1), + _DTV_CMD(DTV_API_VERSION, 0, 0), + + _DTV_CMD(DTV_ENUM_DELSYS, 0, 0), + + _DTV_CMD(DTV_ATSCMH_PARADE_ID, 1, 0), + _DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE, 1, 0), + + _DTV_CMD(DTV_ATSCMH_FIC_VER, 0, 0), + _DTV_CMD(DTV_ATSCMH_NOG, 0, 0), + _DTV_CMD(DTV_ATSCMH_TNOG, 0, 0), + _DTV_CMD(DTV_ATSCMH_SGN, 0, 0), + _DTV_CMD(DTV_ATSCMH_PRC, 0, 0), + _DTV_CMD(DTV_ATSCMH_RS_FRAME_MODE, 0, 0), + _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_PRI, 0, 0), + _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_SEC, 0, 0), + _DTV_CMD(DTV_ATSCMH_SCCC_BLOCK_MODE, 0, 0), + _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_A, 0, 0), + _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_B, 0, 0), + _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_C, 0, 0), + _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_D, 0, 0), + + /* Statistics API */ + _DTV_CMD(DTV_STAT_SIGNAL_STRENGTH, 0, 0), + _DTV_CMD(DTV_STAT_CNR, 0, 0), + _DTV_CMD(DTV_STAT_PRE_ERROR_BIT_COUNT, 0, 0), + _DTV_CMD(DTV_STAT_PRE_TOTAL_BIT_COUNT, 0, 0), + _DTV_CMD(DTV_STAT_POST_ERROR_BIT_COUNT, 0, 0), + _DTV_CMD(DTV_STAT_POST_TOTAL_BIT_COUNT, 0, 0), + _DTV_CMD(DTV_STAT_ERROR_BLOCK_COUNT, 0, 0), + _DTV_CMD(DTV_STAT_TOTAL_BLOCK_COUNT, 0, 0), +}; + +static void dtv_property_dump(struct dvb_frontend *fe, struct dtv_property *tvp) +{ + int i; + + if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) { + dev_warn(fe->dvb->device, "%s: tvp.cmd = 0x%08x undefined\n", + __func__, tvp->cmd); + return; + } + + dev_dbg(fe->dvb->device, "%s: tvp.cmd = 0x%08x (%s)\n", __func__, + tvp->cmd, dtv_cmds[tvp->cmd].name); + + if (dtv_cmds[tvp->cmd].buffer) { + dev_dbg(fe->dvb->device, "%s: tvp.u.buffer.len = 0x%02x\n", + __func__, tvp->u.buffer.len); + + for(i = 0; i < tvp->u.buffer.len; i++) + dev_dbg(fe->dvb->device, + "%s: tvp.u.buffer.data[0x%02x] = 0x%02x\n", + __func__, i, tvp->u.buffer.data[i]); + } else { + dev_dbg(fe->dvb->device, "%s: tvp.u.data = 0x%08x\n", __func__, + tvp->u.data); + } +} + +/* Synchronise the legacy tuning parameters into the cache, so that demodulator + * drivers can use a single set_frontend tuning function, regardless of whether + * it's being used for the legacy or new API, reducing code and complexity. + */ +static int dtv_property_cache_sync(struct dvb_frontend *fe, + struct dtv_frontend_properties *c, + const struct dvb_frontend_parameters *p) +{ + c->frequency = p->frequency; + c->inversion = p->inversion; + + switch (dvbv3_type(c->delivery_system)) { + case DVBV3_QPSK: + dev_dbg(fe->dvb->device, "%s: Preparing QPSK req\n", __func__); + c->symbol_rate = p->u.qpsk.symbol_rate; + c->fec_inner = p->u.qpsk.fec_inner; + break; + case DVBV3_QAM: + dev_dbg(fe->dvb->device, "%s: Preparing QAM req\n", __func__); + c->symbol_rate = p->u.qam.symbol_rate; + c->fec_inner = p->u.qam.fec_inner; + c->modulation = p->u.qam.modulation; + break; + case DVBV3_OFDM: + dev_dbg(fe->dvb->device, "%s: Preparing OFDM req\n", __func__); + + switch (p->u.ofdm.bandwidth) { + case BANDWIDTH_10_MHZ: + c->bandwidth_hz = 10000000; + break; + case BANDWIDTH_8_MHZ: + c->bandwidth_hz = 8000000; + break; + case BANDWIDTH_7_MHZ: + c->bandwidth_hz = 7000000; + break; + case BANDWIDTH_6_MHZ: + c->bandwidth_hz = 6000000; + break; + case BANDWIDTH_5_MHZ: + c->bandwidth_hz = 5000000; + break; + case BANDWIDTH_1_712_MHZ: + c->bandwidth_hz = 1712000; + break; + case BANDWIDTH_AUTO: + c->bandwidth_hz = 0; + } + + c->code_rate_HP = p->u.ofdm.code_rate_HP; + c->code_rate_LP = p->u.ofdm.code_rate_LP; + c->modulation = p->u.ofdm.constellation; + c->transmission_mode = p->u.ofdm.transmission_mode; + c->guard_interval = p->u.ofdm.guard_interval; + c->hierarchy = p->u.ofdm.hierarchy_information; + break; + case DVBV3_ATSC: + dev_dbg(fe->dvb->device, "%s: Preparing ATSC req\n", __func__); + c->modulation = p->u.vsb.modulation; + if (c->delivery_system == SYS_ATSCMH) + break; + if ((c->modulation == VSB_8) || (c->modulation == VSB_16)) + c->delivery_system = SYS_ATSC; + else + c->delivery_system = SYS_DVBC_ANNEX_B; + break; + case DVBV3_UNKNOWN: + dev_err(fe->dvb->device, + "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", + __func__, c->delivery_system); + return -EINVAL; + } + + return 0; +} + +/* Ensure the cached values are set correctly in the frontend + * legacy tuning structures, for the advanced tuning API. + */ +static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + const struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + p->frequency = c->frequency; + p->inversion = c->inversion; + + switch (dvbv3_type(c->delivery_system)) { + case DVBV3_UNKNOWN: + dev_err(fe->dvb->device, + "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", + __func__, c->delivery_system); + return -EINVAL; + case DVBV3_QPSK: + dev_dbg(fe->dvb->device, "%s: Preparing QPSK req\n", __func__); + p->u.qpsk.symbol_rate = c->symbol_rate; + p->u.qpsk.fec_inner = c->fec_inner; + break; + case DVBV3_QAM: + dev_dbg(fe->dvb->device, "%s: Preparing QAM req\n", __func__); + p->u.qam.symbol_rate = c->symbol_rate; + p->u.qam.fec_inner = c->fec_inner; + p->u.qam.modulation = c->modulation; + break; + case DVBV3_OFDM: + dev_dbg(fe->dvb->device, "%s: Preparing OFDM req\n", __func__); + switch (c->bandwidth_hz) { + case 10000000: + p->u.ofdm.bandwidth = BANDWIDTH_10_MHZ; + break; + case 8000000: + p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; + break; + case 7000000: + p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; + break; + case 6000000: + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + break; + case 5000000: + p->u.ofdm.bandwidth = BANDWIDTH_5_MHZ; + break; + case 1712000: + p->u.ofdm.bandwidth = BANDWIDTH_1_712_MHZ; + break; + case 0: + default: + p->u.ofdm.bandwidth = BANDWIDTH_AUTO; + } + p->u.ofdm.code_rate_HP = c->code_rate_HP; + p->u.ofdm.code_rate_LP = c->code_rate_LP; + p->u.ofdm.constellation = c->modulation; + p->u.ofdm.transmission_mode = c->transmission_mode; + p->u.ofdm.guard_interval = c->guard_interval; + p->u.ofdm.hierarchy_information = c->hierarchy; + break; + case DVBV3_ATSC: + dev_dbg(fe->dvb->device, "%s: Preparing VSB req\n", __func__); + p->u.vsb.modulation = c->modulation; + break; + } + return 0; +} + +/** + * dtv_get_frontend - calls a callback for retrieving DTV parameters + * @fe: struct dvb_frontend pointer + * @c: struct dtv_frontend_properties pointer (DVBv5 cache) + * @p_out struct dvb_frontend_parameters pointer (DVBv3 FE struct) + * + * This routine calls either the DVBv3 or DVBv5 get_frontend call. + * If c is not null, it will update the DVBv5 cache struct pointed by it. + * If p_out is not null, it will update the DVBv3 params pointed by it. + */ +static int dtv_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p_out) +{ + int r; + + if (fe->ops.get_frontend) { + r = fe->ops.get_frontend(fe); + if (unlikely(r < 0)) + return r; + if (p_out) + dtv_property_legacy_params_sync(fe, p_out); + return 0; + } + + /* As everything is in cache, get_frontend fops are always supported */ + return 0; +} + +static int dvb_frontend_ioctl_legacy(struct file *file, + unsigned int cmd, void *parg); +static int dvb_frontend_ioctl_properties(struct file *file, + unsigned int cmd, void *parg); + +static int dtv_property_process_get(struct dvb_frontend *fe, + const struct dtv_frontend_properties *c, + struct dtv_property *tvp, + struct file *file) +{ + int r, ncaps; + + switch(tvp->cmd) { + case DTV_ENUM_DELSYS: + ncaps = 0; + while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { + tvp->u.buffer.data[ncaps] = fe->ops.delsys[ncaps]; + ncaps++; + } + tvp->u.buffer.len = ncaps; + break; + case DTV_FREQUENCY: + tvp->u.data = c->frequency; + break; + case DTV_MODULATION: + tvp->u.data = c->modulation; + break; + case DTV_BANDWIDTH_HZ: + tvp->u.data = c->bandwidth_hz; + break; + case DTV_INVERSION: + tvp->u.data = c->inversion; + break; + case DTV_SYMBOL_RATE: + tvp->u.data = c->symbol_rate; + break; + case DTV_INNER_FEC: + tvp->u.data = c->fec_inner; + break; + case DTV_PILOT: + tvp->u.data = c->pilot; + break; + case DTV_ROLLOFF: + tvp->u.data = c->rolloff; + break; + case DTV_DELIVERY_SYSTEM: + tvp->u.data = c->delivery_system; + break; + case DTV_VOLTAGE: + tvp->u.data = c->voltage; + break; + case DTV_TONE: + tvp->u.data = c->sectone; + break; + case DTV_API_VERSION: + tvp->u.data = (DVB_API_VERSION << 8) | DVB_API_VERSION_MINOR; + break; + case DTV_CODE_RATE_HP: + tvp->u.data = c->code_rate_HP; + break; + case DTV_CODE_RATE_LP: + tvp->u.data = c->code_rate_LP; + break; + case DTV_GUARD_INTERVAL: + tvp->u.data = c->guard_interval; + break; + case DTV_TRANSMISSION_MODE: + tvp->u.data = c->transmission_mode; + break; + case DTV_HIERARCHY: + tvp->u.data = c->hierarchy; + break; + case DTV_INTERLEAVING: + tvp->u.data = c->interleaving; + break; + + /* ISDB-T Support here */ + case DTV_ISDBT_PARTIAL_RECEPTION: + tvp->u.data = c->isdbt_partial_reception; + break; + case DTV_ISDBT_SOUND_BROADCASTING: + tvp->u.data = c->isdbt_sb_mode; + break; + case DTV_ISDBT_SB_SUBCHANNEL_ID: + tvp->u.data = c->isdbt_sb_subchannel; + break; + case DTV_ISDBT_SB_SEGMENT_IDX: + tvp->u.data = c->isdbt_sb_segment_idx; + break; + case DTV_ISDBT_SB_SEGMENT_COUNT: + tvp->u.data = c->isdbt_sb_segment_count; + break; + case DTV_ISDBT_LAYER_ENABLED: + tvp->u.data = c->isdbt_layer_enabled; + break; + case DTV_ISDBT_LAYERA_FEC: + tvp->u.data = c->layer[0].fec; + break; + case DTV_ISDBT_LAYERA_MODULATION: + tvp->u.data = c->layer[0].modulation; + break; + case DTV_ISDBT_LAYERA_SEGMENT_COUNT: + tvp->u.data = c->layer[0].segment_count; + break; + case DTV_ISDBT_LAYERA_TIME_INTERLEAVING: + tvp->u.data = c->layer[0].interleaving; + break; + case DTV_ISDBT_LAYERB_FEC: + tvp->u.data = c->layer[1].fec; + break; + case DTV_ISDBT_LAYERB_MODULATION: + tvp->u.data = c->layer[1].modulation; + break; + case DTV_ISDBT_LAYERB_SEGMENT_COUNT: + tvp->u.data = c->layer[1].segment_count; + break; + case DTV_ISDBT_LAYERB_TIME_INTERLEAVING: + tvp->u.data = c->layer[1].interleaving; + break; + case DTV_ISDBT_LAYERC_FEC: + tvp->u.data = c->layer[2].fec; + break; + case DTV_ISDBT_LAYERC_MODULATION: + tvp->u.data = c->layer[2].modulation; + break; + case DTV_ISDBT_LAYERC_SEGMENT_COUNT: + tvp->u.data = c->layer[2].segment_count; + break; + case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: + tvp->u.data = c->layer[2].interleaving; + break; + + /* Multistream support */ + case DTV_STREAM_ID: + case DTV_DVBT2_PLP_ID_LEGACY: + tvp->u.data = c->stream_id; + break; + + /* ATSC-MH */ + case DTV_ATSCMH_FIC_VER: + tvp->u.data = fe->dtv_property_cache.atscmh_fic_ver; + break; + case DTV_ATSCMH_PARADE_ID: + tvp->u.data = fe->dtv_property_cache.atscmh_parade_id; + break; + case DTV_ATSCMH_NOG: + tvp->u.data = fe->dtv_property_cache.atscmh_nog; + break; + case DTV_ATSCMH_TNOG: + tvp->u.data = fe->dtv_property_cache.atscmh_tnog; + break; + case DTV_ATSCMH_SGN: + tvp->u.data = fe->dtv_property_cache.atscmh_sgn; + break; + case DTV_ATSCMH_PRC: + tvp->u.data = fe->dtv_property_cache.atscmh_prc; + break; + case DTV_ATSCMH_RS_FRAME_MODE: + tvp->u.data = fe->dtv_property_cache.atscmh_rs_frame_mode; + break; + case DTV_ATSCMH_RS_FRAME_ENSEMBLE: + tvp->u.data = fe->dtv_property_cache.atscmh_rs_frame_ensemble; + break; + case DTV_ATSCMH_RS_CODE_MODE_PRI: + tvp->u.data = fe->dtv_property_cache.atscmh_rs_code_mode_pri; + break; + case DTV_ATSCMH_RS_CODE_MODE_SEC: + tvp->u.data = fe->dtv_property_cache.atscmh_rs_code_mode_sec; + break; + case DTV_ATSCMH_SCCC_BLOCK_MODE: + tvp->u.data = fe->dtv_property_cache.atscmh_sccc_block_mode; + break; + case DTV_ATSCMH_SCCC_CODE_MODE_A: + tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_a; + break; + case DTV_ATSCMH_SCCC_CODE_MODE_B: + tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_b; + break; + case DTV_ATSCMH_SCCC_CODE_MODE_C: + tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_c; + break; + case DTV_ATSCMH_SCCC_CODE_MODE_D: + tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_d; + break; + + case DTV_LNA: + tvp->u.data = c->lna; + break; + + /* Fill quality measures */ + case DTV_STAT_SIGNAL_STRENGTH: + tvp->u.st = c->strength; + break; + case DTV_STAT_CNR: + tvp->u.st = c->cnr; + break; + case DTV_STAT_PRE_ERROR_BIT_COUNT: + tvp->u.st = c->pre_bit_error; + break; + case DTV_STAT_PRE_TOTAL_BIT_COUNT: + tvp->u.st = c->pre_bit_count; + break; + case DTV_STAT_POST_ERROR_BIT_COUNT: + tvp->u.st = c->post_bit_error; + break; + case DTV_STAT_POST_TOTAL_BIT_COUNT: + tvp->u.st = c->post_bit_count; + break; + case DTV_STAT_ERROR_BLOCK_COUNT: + tvp->u.st = c->block_error; + break; + case DTV_STAT_TOTAL_BLOCK_COUNT: + tvp->u.st = c->block_count; + break; + default: + dev_dbg(fe->dvb->device, + "%s: FE property %d doesn't exist\n", + __func__, tvp->cmd); + return -EINVAL; + } + + /* Allow the frontend to override outgoing properties */ + if (fe->ops.get_property) { + r = fe->ops.get_property(fe, tvp); + if (r < 0) + return r; + } + + dtv_property_dump(fe, tvp); + + return 0; +} + +static int dtv_set_frontend(struct dvb_frontend *fe); + +static bool is_dvbv3_delsys(u32 delsys) +{ + bool status; + + status = (delsys == SYS_DVBT) || (delsys == SYS_DVBC_ANNEX_A) || + (delsys == SYS_DVBS) || (delsys == SYS_ATSC); + + return status; +} + +/** + * emulate_delivery_system - emulate a DVBv5 delivery system with a DVBv3 type + * @fe: struct frontend; + * @delsys: DVBv5 type that will be used for emulation + * + * Provides emulation for delivery systems that are compatible with the old + * DVBv3 call. Among its usages, it provices support for ISDB-T, and allows + * using a DVB-S2 only frontend just like it were a DVB-S, if the frontent + * parameters are compatible with DVB-S spec. + */ +static int emulate_delivery_system(struct dvb_frontend *fe, u32 delsys) +{ + int i; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + c->delivery_system = delsys; + + /* + * If the call is for ISDB-T, put it into full-seg, auto mode, TV + */ + if (c->delivery_system == SYS_ISDBT) { + dev_dbg(fe->dvb->device, + "%s: Using defaults for SYS_ISDBT\n", + __func__); + + if (!c->bandwidth_hz) + c->bandwidth_hz = 6000000; + + c->isdbt_partial_reception = 0; + c->isdbt_sb_mode = 0; + c->isdbt_sb_subchannel = 0; + c->isdbt_sb_segment_idx = 0; + c->isdbt_sb_segment_count = 0; + c->isdbt_layer_enabled = 7; + for (i = 0; i < 3; i++) { + c->layer[i].fec = FEC_AUTO; + c->layer[i].modulation = QAM_AUTO; + c->layer[i].interleaving = 0; + c->layer[i].segment_count = 0; + } + } + dev_dbg(fe->dvb->device, "%s: change delivery system on cache to %d\n", + __func__, c->delivery_system); + + return 0; +} + +/** + * dvbv5_set_delivery_system - Sets the delivery system for a DVBv5 API call + * @fe: frontend struct + * @desired_system: delivery system requested by the user + * + * A DVBv5 call know what's the desired system it wants. So, set it. + * + * There are, however, a few known issues with early DVBv5 applications that + * are also handled by this logic: + * + * 1) Some early apps use SYS_UNDEFINED as the desired delivery system. + * This is an API violation, but, as we don't want to break userspace, + * convert it to the first supported delivery system. + * 2) Some apps might be using a DVBv5 call in a wrong way, passing, for + * example, SYS_DVBT instead of SYS_ISDBT. This is because early usage of + * ISDB-T provided backward compat with DVB-T. + */ +static int dvbv5_set_delivery_system(struct dvb_frontend *fe, + u32 desired_system) +{ + int ncaps; + u32 delsys = SYS_UNDEFINED; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + enum dvbv3_emulation_type type; + + /* + * It was reported that some old DVBv5 applications were + * filling delivery_system with SYS_UNDEFINED. If this happens, + * assume that the application wants to use the first supported + * delivery system. + */ + if (desired_system == SYS_UNDEFINED) + desired_system = fe->ops.delsys[0]; + + /* + * This is a DVBv5 call. So, it likely knows the supported + * delivery systems. So, check if the desired delivery system is + * supported + */ + ncaps = 0; + while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { + if (fe->ops.delsys[ncaps] == desired_system) { + c->delivery_system = desired_system; + dev_dbg(fe->dvb->device, + "%s: Changing delivery system to %d\n", + __func__, desired_system); + return 0; + } + ncaps++; + } + + /* + * The requested delivery system isn't supported. Maybe userspace + * is requesting a DVBv3 compatible delivery system. + * + * The emulation only works if the desired system is one of the + * delivery systems supported by DVBv3 API + */ + if (!is_dvbv3_delsys(desired_system)) { + dev_dbg(fe->dvb->device, + "%s: Delivery system %d not supported.\n", + __func__, desired_system); + return -EINVAL; + } + + type = dvbv3_type(desired_system); + + /* + * Get the last non-DVBv3 delivery system that has the same type + * of the desired system + */ + ncaps = 0; + while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { + if (dvbv3_type(fe->ops.delsys[ncaps]) == type) + delsys = fe->ops.delsys[ncaps]; + ncaps++; + } + + /* There's nothing compatible with the desired delivery system */ + if (delsys == SYS_UNDEFINED) { + dev_dbg(fe->dvb->device, + "%s: Delivery system %d not supported on emulation mode.\n", + __func__, desired_system); + return -EINVAL; + } + + dev_dbg(fe->dvb->device, + "%s: Using delivery system %d emulated as if it were %d\n", + __func__, delsys, desired_system); + + return emulate_delivery_system(fe, desired_system); +} + +/** + * dvbv3_set_delivery_system - Sets the delivery system for a DVBv3 API call + * @fe: frontend struct + * + * A DVBv3 call doesn't know what's the desired system it wants. It also + * doesn't allow to switch between different types. Due to that, userspace + * should use DVBv5 instead. + * However, in order to avoid breaking userspace API, limited backward + * compatibility support is provided. + * + * There are some delivery systems that are incompatible with DVBv3 calls. + * + * This routine should work fine for frontends that support just one delivery + * system. + * + * For frontends that support multiple frontends: + * 1) It defaults to use the first supported delivery system. There's an + * userspace application that allows changing it at runtime; + * + * 2) If the current delivery system is not compatible with DVBv3, it gets + * the first one that it is compatible. + * + * NOTE: in order for this to work with applications like Kaffeine that + * uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to + * DVB-S, drivers that support both DVB-S and DVB-S2 should have the + * SYS_DVBS entry before the SYS_DVBS2, otherwise it won't switch back + * to DVB-S. + */ +static int dvbv3_set_delivery_system(struct dvb_frontend *fe) +{ + int ncaps; + u32 delsys = SYS_UNDEFINED; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + /* If not set yet, defaults to the first supported delivery system */ + if (c->delivery_system == SYS_UNDEFINED) + c->delivery_system = fe->ops.delsys[0]; + + /* + * Trivial case: just use the current one, if it already a DVBv3 + * delivery system + */ + if (is_dvbv3_delsys(c->delivery_system)) { + dev_dbg(fe->dvb->device, + "%s: Using delivery system to %d\n", + __func__, c->delivery_system); + return 0; + } + + /* + * Seek for the first delivery system that it is compatible with a + * DVBv3 standard + */ + ncaps = 0; + while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { + if (dvbv3_type(fe->ops.delsys[ncaps]) != DVBV3_UNKNOWN) { + delsys = fe->ops.delsys[ncaps]; + break; + } + ncaps++; + } + if (delsys == SYS_UNDEFINED) { + dev_dbg(fe->dvb->device, + "%s: Couldn't find a delivery system that works with FE_SET_FRONTEND\n", + __func__); + return -EINVAL; + } + return emulate_delivery_system(fe, delsys); +} + +static int dtv_property_process_set(struct dvb_frontend *fe, + struct dtv_property *tvp, + struct file *file) +{ + int r = 0; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + /* Allow the frontend to validate incoming properties */ + if (fe->ops.set_property) { + r = fe->ops.set_property(fe, tvp); + if (r < 0) + return r; + } + + switch(tvp->cmd) { + case DTV_CLEAR: + /* + * Reset a cache of data specific to the frontend here. This does + * not effect hardware. + */ + dvb_frontend_clear_cache(fe); + break; + case DTV_TUNE: + /* interpret the cache of data, build either a traditional frontend + * tunerequest so we can pass validation in the FE_SET_FRONTEND + * ioctl. + */ + c->state = tvp->cmd; + dev_dbg(fe->dvb->device, "%s: Finalised property cache\n", + __func__); + + r = dtv_set_frontend(fe); + break; + case DTV_FREQUENCY: + c->frequency = tvp->u.data; + break; + case DTV_MODULATION: + c->modulation = tvp->u.data; + break; + case DTV_BANDWIDTH_HZ: + c->bandwidth_hz = tvp->u.data; + break; + case DTV_INVERSION: + c->inversion = tvp->u.data; + break; + case DTV_SYMBOL_RATE: + c->symbol_rate = tvp->u.data; + break; + case DTV_INNER_FEC: + c->fec_inner = tvp->u.data; + break; + case DTV_PILOT: + c->pilot = tvp->u.data; + break; + case DTV_ROLLOFF: + c->rolloff = tvp->u.data; + break; + case DTV_DELIVERY_SYSTEM: + r = dvbv5_set_delivery_system(fe, tvp->u.data); + break; + case DTV_VOLTAGE: + c->voltage = tvp->u.data; + r = dvb_frontend_ioctl_legacy(file, FE_SET_VOLTAGE, + (void *)c->voltage); + break; + case DTV_TONE: + c->sectone = tvp->u.data; + r = dvb_frontend_ioctl_legacy(file, FE_SET_TONE, + (void *)c->sectone); + break; + case DTV_CODE_RATE_HP: + c->code_rate_HP = tvp->u.data; + break; + case DTV_CODE_RATE_LP: + c->code_rate_LP = tvp->u.data; + break; + case DTV_GUARD_INTERVAL: + c->guard_interval = tvp->u.data; + break; + case DTV_TRANSMISSION_MODE: + c->transmission_mode = tvp->u.data; + break; + case DTV_HIERARCHY: + c->hierarchy = tvp->u.data; + break; + case DTV_INTERLEAVING: + c->interleaving = tvp->u.data; + break; + + /* ISDB-T Support here */ + case DTV_ISDBT_PARTIAL_RECEPTION: + c->isdbt_partial_reception = tvp->u.data; + break; + case DTV_ISDBT_SOUND_BROADCASTING: + c->isdbt_sb_mode = tvp->u.data; + break; + case DTV_ISDBT_SB_SUBCHANNEL_ID: + c->isdbt_sb_subchannel = tvp->u.data; + break; + case DTV_ISDBT_SB_SEGMENT_IDX: + c->isdbt_sb_segment_idx = tvp->u.data; + break; + case DTV_ISDBT_SB_SEGMENT_COUNT: + c->isdbt_sb_segment_count = tvp->u.data; + break; + case DTV_ISDBT_LAYER_ENABLED: + c->isdbt_layer_enabled = tvp->u.data; + break; + case DTV_ISDBT_LAYERA_FEC: + c->layer[0].fec = tvp->u.data; + break; + case DTV_ISDBT_LAYERA_MODULATION: + c->layer[0].modulation = tvp->u.data; + break; + case DTV_ISDBT_LAYERA_SEGMENT_COUNT: + c->layer[0].segment_count = tvp->u.data; + break; + case DTV_ISDBT_LAYERA_TIME_INTERLEAVING: + c->layer[0].interleaving = tvp->u.data; + break; + case DTV_ISDBT_LAYERB_FEC: + c->layer[1].fec = tvp->u.data; + break; + case DTV_ISDBT_LAYERB_MODULATION: + c->layer[1].modulation = tvp->u.data; + break; + case DTV_ISDBT_LAYERB_SEGMENT_COUNT: + c->layer[1].segment_count = tvp->u.data; + break; + case DTV_ISDBT_LAYERB_TIME_INTERLEAVING: + c->layer[1].interleaving = tvp->u.data; + break; + case DTV_ISDBT_LAYERC_FEC: + c->layer[2].fec = tvp->u.data; + break; + case DTV_ISDBT_LAYERC_MODULATION: + c->layer[2].modulation = tvp->u.data; + break; + case DTV_ISDBT_LAYERC_SEGMENT_COUNT: + c->layer[2].segment_count = tvp->u.data; + break; + case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: + c->layer[2].interleaving = tvp->u.data; + break; + + /* Multistream support */ + case DTV_STREAM_ID: + case DTV_DVBT2_PLP_ID_LEGACY: + c->stream_id = tvp->u.data; + break; + + /* ATSC-MH */ + case DTV_ATSCMH_PARADE_ID: + fe->dtv_property_cache.atscmh_parade_id = tvp->u.data; + break; + case DTV_ATSCMH_RS_FRAME_ENSEMBLE: + fe->dtv_property_cache.atscmh_rs_frame_ensemble = tvp->u.data; + break; + + case DTV_LNA: + c->lna = tvp->u.data; + if (fe->ops.set_lna) + r = fe->ops.set_lna(fe); + break; + + default: + return -EINVAL; + } + + return r; +} + +static int dvb_frontend_ioctl(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + int err = -EOPNOTSUPP; + + dev_dbg(fe->dvb->device, "%s: (%d)\n", __func__, _IOC_NR(cmd)); + if (down_interruptible(&fepriv->sem)) + return -ERESTARTSYS; + + if (fepriv->exit != DVB_FE_NO_EXIT) { + up(&fepriv->sem); + return -ENODEV; + } + + if ((file->f_flags & O_ACCMODE) == O_RDONLY && + (_IOC_DIR(cmd) != _IOC_READ || cmd == FE_GET_EVENT || + cmd == FE_DISEQC_RECV_SLAVE_REPLY)) { + up(&fepriv->sem); + return -EPERM; + } + + if ((cmd == FE_SET_PROPERTY) || (cmd == FE_GET_PROPERTY)) + err = dvb_frontend_ioctl_properties(file, cmd, parg); + else { + c->state = DTV_UNDEFINED; + err = dvb_frontend_ioctl_legacy(file, cmd, parg); + } + + up(&fepriv->sem); + return err; +} + +static int dvb_frontend_ioctl_properties(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int err = 0; + + struct dtv_properties *tvps = NULL; + struct dtv_property *tvp = NULL; + int i; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + if(cmd == FE_SET_PROPERTY) { + tvps = (struct dtv_properties __user *)parg; + + dev_dbg(fe->dvb->device, "%s: properties.num = %d\n", __func__, tvps->num); + dev_dbg(fe->dvb->device, "%s: properties.props = %p\n", __func__, tvps->props); + + /* Put an arbitrary limit on the number of messages that can + * be sent at once */ + if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) + return -EINVAL; + + tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL); + if (!tvp) { + err = -ENOMEM; + goto out; + } + + if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + for (i = 0; i < tvps->num; i++) { + err = dtv_property_process_set(fe, tvp + i, file); + if (err < 0) + goto out; + (tvp + i)->result = err; + } + + if (c->state == DTV_TUNE) + dev_dbg(fe->dvb->device, "%s: Property cache is full, tuning\n", __func__); + + } else + if(cmd == FE_GET_PROPERTY) { + tvps = (struct dtv_properties __user *)parg; + + dev_dbg(fe->dvb->device, "%s: properties.num = %d\n", __func__, tvps->num); + dev_dbg(fe->dvb->device, "%s: properties.props = %p\n", __func__, tvps->props); + + /* Put an arbitrary limit on the number of messages that can + * be sent at once */ + if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) + return -EINVAL; + + tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL); + if (!tvp) { + err = -ENOMEM; + goto out; + } + + if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + /* + * Fills the cache out struct with the cache contents, plus + * the data retrieved from get_frontend, if the frontend + * is not idle. Otherwise, returns the cached content + */ + if (fepriv->state != FESTATE_IDLE) { + err = dtv_get_frontend(fe, NULL); + if (err < 0) + goto out; + } + for (i = 0; i < tvps->num; i++) { + err = dtv_property_process_get(fe, c, tvp + i, file); + if (err < 0) + goto out; + (tvp + i)->result = err; + } + + if (copy_to_user(tvps->props, tvp, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + } else + err = -EOPNOTSUPP; + +out: + kfree(tvp); + return err; +} + +static int dtv_set_frontend(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_frontend_tune_settings fetunesettings; + u32 rolloff = 0; + + if (dvb_frontend_check_parameters(fe) < 0) + return -EINVAL; + + /* + * Initialize output parameters to match the values given by + * the user. FE_SET_FRONTEND triggers an initial frontend event + * with status = 0, which copies output parameters to userspace. + */ + dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); + + /* + * Be sure that the bandwidth will be filled for all + * non-satellite systems, as tuners need to know what + * low pass/Nyquist half filter should be applied, in + * order to avoid inter-channel noise. + * + * ISDB-T and DVB-T/T2 already sets bandwidth. + * ATSC and DVB-C don't set, so, the core should fill it. + * + * On DVB-C Annex A and C, the bandwidth is a function of + * the roll-off and symbol rate. Annex B defines different + * roll-off factors depending on the modulation. Fortunately, + * Annex B is only used with 6MHz, so there's no need to + * calculate it. + * + * While not officially supported, a side effect of handling it at + * the cache level is that a program could retrieve the bandwidth + * via DTV_BANDWIDTH_HZ, which may be useful for test programs. + */ + switch (c->delivery_system) { + case SYS_ATSC: + case SYS_DVBC_ANNEX_B: + c->bandwidth_hz = 6000000; + break; + case SYS_DVBC_ANNEX_A: + rolloff = 115; + break; + case SYS_DVBC_ANNEX_C: + rolloff = 113; + break; + default: + break; + } + if (rolloff) + c->bandwidth_hz = (c->symbol_rate * rolloff) / 100; + + /* force auto frequency inversion if requested */ + if (dvb_force_auto_inversion) + c->inversion = INVERSION_AUTO; + + /* + * without hierarchical coding code_rate_LP is irrelevant, + * so we tolerate the otherwise invalid FEC_NONE setting + */ + if (c->hierarchy == HIERARCHY_NONE && c->code_rate_LP == FEC_NONE) + c->code_rate_LP = FEC_AUTO; + + /* get frontend-specific tuning settings */ + memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings)); + if (fe->ops.get_tune_settings && (fe->ops.get_tune_settings(fe, &fetunesettings) == 0)) { + fepriv->min_delay = (fetunesettings.min_delay_ms * HZ) / 1000; + fepriv->max_drift = fetunesettings.max_drift; + fepriv->step_size = fetunesettings.step_size; + } else { + /* default values */ + switch (c->delivery_system) { + case SYS_DVBS: + case SYS_DVBS2: + case SYS_ISDBS: + case SYS_TURBO: + case SYS_DVBC_ANNEX_A: + case SYS_DVBC_ANNEX_C: + fepriv->min_delay = HZ / 20; + fepriv->step_size = c->symbol_rate / 16000; + fepriv->max_drift = c->symbol_rate / 2000; + break; + case SYS_DVBT: + case SYS_DVBT2: + case SYS_ISDBT: + case SYS_DTMB: + fepriv->min_delay = HZ / 20; + fepriv->step_size = fe->ops.info.frequency_stepsize * 2; + fepriv->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; + break; + default: + /* + * FIXME: This sounds wrong! if freqency_stepsize is + * defined by the frontend, why not use it??? + */ + fepriv->min_delay = HZ / 20; + fepriv->step_size = 0; /* no zigzag */ + fepriv->max_drift = 0; + break; + } + } + if (dvb_override_tune_delay > 0) + fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000; + + fepriv->state = FESTATE_RETUNE; + + /* Request the search algorithm to search */ + fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; + + dvb_frontend_clear_events(fe); + dvb_frontend_add_event(fe, 0); + dvb_frontend_wakeup(fe); + fepriv->status = 0; + + return 0; +} + + +static int dvb_frontend_ioctl_legacy(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int err = -EOPNOTSUPP; + + switch (cmd) { + case FE_GET_INFO: { + struct dvb_frontend_info* info = parg; + + memcpy(info, &fe->ops.info, sizeof(struct dvb_frontend_info)); + dvb_frontend_get_frequency_limits(fe, &info->frequency_min, &info->frequency_max); + + /* + * Associate the 4 delivery systems supported by DVBv3 + * API with their DVBv5 counterpart. For the other standards, + * use the closest type, assuming that it would hopefully + * work with a DVBv3 application. + * It should be noticed that, on multi-frontend devices with + * different types (terrestrial and cable, for example), + * a pure DVBv3 application won't be able to use all delivery + * systems. Yet, changing the DVBv5 cache to the other delivery + * system should be enough for making it work. + */ + switch (dvbv3_type(c->delivery_system)) { + case DVBV3_QPSK: + info->type = FE_QPSK; + break; + case DVBV3_ATSC: + info->type = FE_ATSC; + break; + case DVBV3_QAM: + info->type = FE_QAM; + break; + case DVBV3_OFDM: + info->type = FE_OFDM; + break; + default: + dev_err(fe->dvb->device, + "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", + __func__, c->delivery_system); + fe->ops.info.type = FE_OFDM; + } + dev_dbg(fe->dvb->device, "%s: current delivery system on cache: %d, V3 type: %d\n", + __func__, c->delivery_system, fe->ops.info.type); + + /* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't + * do it, it is done for it. */ + info->caps |= FE_CAN_INVERSION_AUTO; + err = 0; + break; + } + + case FE_READ_STATUS: { + fe_status_t* status = parg; + + /* if retune was requested but hasn't occurred yet, prevent + * that user get signal state from previous tuning */ + if (fepriv->state == FESTATE_RETUNE || + fepriv->state == FESTATE_ERROR) { + err=0; + *status = 0; + break; + } + + if (fe->ops.read_status) + err = fe->ops.read_status(fe, status); + break; + } + + case FE_READ_BER: + if (fe->ops.read_ber) { + if (fepriv->thread) + err = fe->ops.read_ber(fe, (__u32 *) parg); + else + err = -EAGAIN; + } + break; + + case FE_READ_SIGNAL_STRENGTH: + if (fe->ops.read_signal_strength) { + if (fepriv->thread) + err = fe->ops.read_signal_strength(fe, (__u16 *) parg); + else + err = -EAGAIN; + } + break; + + case FE_READ_SNR: + if (fe->ops.read_snr) { + if (fepriv->thread) + err = fe->ops.read_snr(fe, (__u16 *) parg); + else + err = -EAGAIN; + } + break; + + case FE_READ_UNCORRECTED_BLOCKS: + if (fe->ops.read_ucblocks) { + if (fepriv->thread) + err = fe->ops.read_ucblocks(fe, (__u32 *) parg); + else + err = -EAGAIN; + } + break; + + case FE_DISEQC_RESET_OVERLOAD: + if (fe->ops.diseqc_reset_overload) { + err = fe->ops.diseqc_reset_overload(fe); + fepriv->state = FESTATE_DISEQC; + fepriv->status = 0; + } + break; + + case FE_DISEQC_SEND_MASTER_CMD: + if (fe->ops.diseqc_send_master_cmd) { + err = fe->ops.diseqc_send_master_cmd(fe, (struct dvb_diseqc_master_cmd*) parg); + fepriv->state = FESTATE_DISEQC; + fepriv->status = 0; + } + break; + + case FE_DISEQC_SEND_BURST: + if (fe->ops.diseqc_send_burst) { + err = fe->ops.diseqc_send_burst(fe, (fe_sec_mini_cmd_t) parg); + fepriv->state = FESTATE_DISEQC; + fepriv->status = 0; + } + break; + + case FE_SET_TONE: + if (fe->ops.set_tone) { + err = fe->ops.set_tone(fe, (fe_sec_tone_mode_t) parg); + fepriv->tone = (fe_sec_tone_mode_t) parg; + fepriv->state = FESTATE_DISEQC; + fepriv->status = 0; + } + break; + + case FE_SET_VOLTAGE: + if (fe->ops.set_voltage) { + err = fe->ops.set_voltage(fe, (fe_sec_voltage_t) parg); + fepriv->voltage = (fe_sec_voltage_t) parg; + fepriv->state = FESTATE_DISEQC; + fepriv->status = 0; + } + break; + + case FE_DISHNETWORK_SEND_LEGACY_CMD: + if (fe->ops.dishnetwork_send_legacy_command) { + err = fe->ops.dishnetwork_send_legacy_command(fe, (unsigned long) parg); + fepriv->state = FESTATE_DISEQC; + fepriv->status = 0; + } else if (fe->ops.set_voltage) { + /* + * NOTE: This is a fallback condition. Some frontends + * (stv0299 for instance) take longer than 8msec to + * respond to a set_voltage command. Those switches + * need custom routines to switch properly. For all + * other frontends, the following should work ok. + * Dish network legacy switches (as used by Dish500) + * are controlled by sending 9-bit command words + * spaced 8msec apart. + * the actual command word is switch/port dependent + * so it is up to the userspace application to send + * the right command. + * The command must always start with a '0' after + * initialization, so parg is 8 bits and does not + * include the initialization or start bit + */ + unsigned long swcmd = ((unsigned long) parg) << 1; + struct timeval nexttime; + struct timeval tv[10]; + int i; + u8 last = 1; + if (dvb_frontend_debug) + printk("%s switch command: 0x%04lx\n", __func__, swcmd); + do_gettimeofday(&nexttime); + if (dvb_frontend_debug) + tv[0] = nexttime; + /* before sending a command, initialize by sending + * a 32ms 18V to the switch + */ + fe->ops.set_voltage(fe, SEC_VOLTAGE_18); + dvb_frontend_sleep_until(&nexttime, 32000); + + for (i = 0; i < 9; i++) { + if (dvb_frontend_debug) + do_gettimeofday(&tv[i + 1]); + if ((swcmd & 0x01) != last) { + /* set voltage to (last ? 13V : 18V) */ + fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18); + last = (last) ? 0 : 1; + } + swcmd = swcmd >> 1; + if (i != 8) + dvb_frontend_sleep_until(&nexttime, 8000); + } + if (dvb_frontend_debug) { + printk("%s(%d): switch delay (should be 32k followed by all 8k\n", + __func__, fe->dvb->num); + for (i = 1; i < 10; i++) + printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); + } + err = 0; + fepriv->state = FESTATE_DISEQC; + fepriv->status = 0; + } + break; + + case FE_DISEQC_RECV_SLAVE_REPLY: + if (fe->ops.diseqc_recv_slave_reply) + err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg); + break; + + case FE_ENABLE_HIGH_LNB_VOLTAGE: + if (fe->ops.enable_high_lnb_voltage) + err = fe->ops.enable_high_lnb_voltage(fe, (long) parg); + break; + + case FE_SET_FRONTEND: + err = dvbv3_set_delivery_system(fe); + if (err) + break; + + err = dtv_property_cache_sync(fe, c, parg); + if (err) + break; + err = dtv_set_frontend(fe); + break; + case FE_GET_EVENT: + err = dvb_frontend_get_event (fe, parg, file->f_flags); + break; + + case FE_GET_FRONTEND: + err = dtv_get_frontend(fe, parg); + break; + + case FE_SET_FRONTEND_TUNE_MODE: + fepriv->tune_mode_flags = (unsigned long) parg; + err = 0; + break; + } + + return err; +} + + +static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struct *wait) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + + dev_dbg_ratelimited(fe->dvb->device, "%s:\n", __func__); + + poll_wait (file, &fepriv->events.wait_queue, wait); + + if (fepriv->events.eventw != fepriv->events.eventr) + return (POLLIN | POLLRDNORM | POLLPRI); + + return 0; +} + +static int dvb_frontend_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_adapter *adapter = fe->dvb; + int ret; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + if (fepriv->exit == DVB_FE_DEVICE_REMOVED) + return -ENODEV; + + if (adapter->mfe_shared) { + mutex_lock (&adapter->mfe_lock); + + if (adapter->mfe_dvbdev == NULL) + adapter->mfe_dvbdev = dvbdev; + + else if (adapter->mfe_dvbdev != dvbdev) { + struct dvb_device + *mfedev = adapter->mfe_dvbdev; + struct dvb_frontend + *mfe = mfedev->priv; + struct dvb_frontend_private + *mfepriv = mfe->frontend_priv; + int mferetry = (dvb_mfe_wait_time << 1); + + mutex_unlock (&adapter->mfe_lock); + while (mferetry-- && (mfedev->users != -1 || + mfepriv->thread != NULL)) { + if(msleep_interruptible(500)) { + if(signal_pending(current)) + return -EINTR; + } + } + + mutex_lock (&adapter->mfe_lock); + if(adapter->mfe_dvbdev != dvbdev) { + mfedev = adapter->mfe_dvbdev; + mfe = mfedev->priv; + mfepriv = mfe->frontend_priv; + if (mfedev->users != -1 || + mfepriv->thread != NULL) { + mutex_unlock (&adapter->mfe_lock); + return -EBUSY; + } + adapter->mfe_dvbdev = dvbdev; + } + } + } + + if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) { + if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0) + goto err0; + + /* If we took control of the bus, we need to force + reinitialization. This is because many ts_bus_ctrl() + functions strobe the RESET pin on the demod, and if the + frontend thread already exists then the dvb_init() routine + won't get called (which is what usually does initial + register configuration). */ + fepriv->reinitialise = 1; + } + + if ((ret = dvb_generic_open (inode, file)) < 0) + goto err1; + + if ((file->f_flags & O_ACCMODE) != O_RDONLY) { + /* normal tune mode when opened R/W */ + fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT; + fepriv->tone = -1; + fepriv->voltage = -1; + + ret = dvb_frontend_start (fe); + if (ret) + goto err2; + + /* empty event queue */ + fepriv->events.eventr = fepriv->events.eventw = 0; + } + + if (adapter->mfe_shared) + mutex_unlock (&adapter->mfe_lock); + return ret; + +err2: + dvb_generic_release(inode, file); +err1: + if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) + fe->ops.ts_bus_ctrl(fe, 0); +err0: + if (adapter->mfe_shared) + mutex_unlock (&adapter->mfe_lock); + return ret; +} + +static int dvb_frontend_release(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + int ret; + + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + if ((file->f_flags & O_ACCMODE) != O_RDONLY) { + fepriv->release_jiffies = jiffies; + mb(); + } + + ret = dvb_generic_release (inode, file); + + if (dvbdev->users == -1) { + wake_up(&fepriv->wait_queue); + if (fepriv->exit != DVB_FE_NO_EXIT) + wake_up(&dvbdev->wait_queue); + if (fe->ops.ts_bus_ctrl) + fe->ops.ts_bus_ctrl(fe, 0); + } + + return ret; +} + +static const struct file_operations dvb_frontend_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = dvb_generic_ioctl, + .poll = dvb_frontend_poll, + .open = dvb_frontend_open, + .release = dvb_frontend_release, + .llseek = noop_llseek, +}; + +int dvb_frontend_suspend(struct dvb_frontend *fe) +{ + int ret = 0; + + dev_dbg(fe->dvb->device, "%s: adap=%d fe=%d\n", __func__, fe->dvb->num, + fe->id); + + if (fe->ops.tuner_ops.sleep) + ret = fe->ops.tuner_ops.sleep(fe); + + if (fe->ops.sleep) + ret = fe->ops.sleep(fe); + + return ret; +} +EXPORT_SYMBOL(dvb_frontend_suspend); + +int dvb_frontend_resume(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + int ret = 0; + + dev_dbg(fe->dvb->device, "%s: adap=%d fe=%d\n", __func__, fe->dvb->num, + fe->id); + + if (fe->ops.init) + ret = fe->ops.init(fe); + + if (fe->ops.tuner_ops.init) + ret = fe->ops.tuner_ops.init(fe); + + fepriv->state = FESTATE_RETUNE; + dvb_frontend_wakeup(fe); + + return ret; +} +EXPORT_SYMBOL(dvb_frontend_resume); + +int dvb_register_frontend(struct dvb_adapter* dvb, + struct dvb_frontend* fe) +{ + struct dvb_frontend_private *fepriv; + static const struct dvb_device dvbdev_template = { + .users = ~0, + .writers = 1, + .readers = (~0)-1, + .fops = &dvb_frontend_fops, + .kernel_ioctl = dvb_frontend_ioctl + }; + + dev_dbg(dvb->device, "%s:\n", __func__); + + if (mutex_lock_interruptible(&frontend_mutex)) + return -ERESTARTSYS; + + fe->frontend_priv = kzalloc(sizeof(struct dvb_frontend_private), GFP_KERNEL); + if (fe->frontend_priv == NULL) { + mutex_unlock(&frontend_mutex); + return -ENOMEM; + } + fepriv = fe->frontend_priv; + + sema_init(&fepriv->sem, 1); + init_waitqueue_head (&fepriv->wait_queue); + init_waitqueue_head (&fepriv->events.wait_queue); + mutex_init(&fepriv->events.mtx); + fe->dvb = dvb; + fepriv->inversion = INVERSION_OFF; + + dev_info(fe->dvb->device, + "DVB: registering adapter %i frontend %i (%s)...\n", + fe->dvb->num, fe->id, fe->ops.info.name); + + dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template, + fe, DVB_DEVICE_FRONTEND); + + /* + * Initialize the cache to the proper values according with the + * first supported delivery system (ops->delsys[0]) + */ + + fe->dtv_property_cache.delivery_system = fe->ops.delsys[0]; + dvb_frontend_clear_cache(fe); + + mutex_unlock(&frontend_mutex); + return 0; +} +EXPORT_SYMBOL(dvb_register_frontend); + +int dvb_unregister_frontend(struct dvb_frontend* fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + dev_dbg(fe->dvb->device, "%s:\n", __func__); + + mutex_lock(&frontend_mutex); + dvb_frontend_stop (fe); + mutex_unlock(&frontend_mutex); + + if (fepriv->dvbdev->users < -1) + wait_event(fepriv->dvbdev->wait_queue, + fepriv->dvbdev->users==-1); + + mutex_lock(&frontend_mutex); + dvb_unregister_device (fepriv->dvbdev); + + /* fe is invalid now */ + kfree(fepriv); + mutex_unlock(&frontend_mutex); + return 0; +} +EXPORT_SYMBOL(dvb_unregister_frontend); + +#ifdef CONFIG_MEDIA_ATTACH +void dvb_frontend_detach(struct dvb_frontend* fe) +{ + void *ptr; + + if (fe->ops.release_sec) { + fe->ops.release_sec(fe); + symbol_put_addr(fe->ops.release_sec); + } + if (fe->ops.tuner_ops.release) { + fe->ops.tuner_ops.release(fe); + symbol_put_addr(fe->ops.tuner_ops.release); + } + if (fe->ops.analog_ops.release) { + fe->ops.analog_ops.release(fe); + symbol_put_addr(fe->ops.analog_ops.release); + } + ptr = (void*)fe->ops.release; + if (ptr) { + fe->ops.release(fe); + symbol_put_addr(ptr); + } +} +#else +void dvb_frontend_detach(struct dvb_frontend* fe) +{ + if (fe->ops.release_sec) + fe->ops.release_sec(fe); + if (fe->ops.tuner_ops.release) + fe->ops.tuner_ops.release(fe); + if (fe->ops.analog_ops.release) + fe->ops.analog_ops.release(fe); + if (fe->ops.release) + fe->ops.release(fe); +} +#endif +EXPORT_SYMBOL(dvb_frontend_detach); diff --git a/drivers/media/dvb-core/dvb_frontend.h b/drivers/media/dvb-core/dvb_frontend.h new file mode 100644 index 00000000..371b6caf --- /dev/null +++ b/drivers/media/dvb-core/dvb_frontend.h @@ -0,0 +1,437 @@ +/* + * dvb_frontend.h + * + * Copyright (C) 2001 convergence integrated media GmbH + * Copyright (C) 2004 convergence GmbH + * + * Written by Ralph Metzler + * Overhauled by Holger Waechtler + * Kernel I2C stuff by Michael Hunold + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVB_FRONTEND_H_ +#define _DVB_FRONTEND_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "dvbdev.h" + +/* + * Maximum number of Delivery systems per frontend. It + * should be smaller or equal to 32 + */ +#define MAX_DELSYS 8 + +struct dvb_frontend_tune_settings { + int min_delay_ms; + int step_size; + int max_drift; +}; + +struct dvb_frontend; + +struct dvb_tuner_info { + char name[128]; + + u32 frequency_min; + u32 frequency_max; + u32 frequency_step; + + u32 bandwidth_min; + u32 bandwidth_max; + u32 bandwidth_step; +}; + +struct analog_parameters { + unsigned int frequency; + unsigned int mode; + unsigned int audmode; + u64 std; +}; + +enum dvbfe_modcod { + DVBFE_MODCOD_DUMMY_PLFRAME = 0, + DVBFE_MODCOD_QPSK_1_4, + DVBFE_MODCOD_QPSK_1_3, + DVBFE_MODCOD_QPSK_2_5, + DVBFE_MODCOD_QPSK_1_2, + DVBFE_MODCOD_QPSK_3_5, + DVBFE_MODCOD_QPSK_2_3, + DVBFE_MODCOD_QPSK_3_4, + DVBFE_MODCOD_QPSK_4_5, + DVBFE_MODCOD_QPSK_5_6, + DVBFE_MODCOD_QPSK_8_9, + DVBFE_MODCOD_QPSK_9_10, + DVBFE_MODCOD_8PSK_3_5, + DVBFE_MODCOD_8PSK_2_3, + DVBFE_MODCOD_8PSK_3_4, + DVBFE_MODCOD_8PSK_5_6, + DVBFE_MODCOD_8PSK_8_9, + DVBFE_MODCOD_8PSK_9_10, + DVBFE_MODCOD_16APSK_2_3, + DVBFE_MODCOD_16APSK_3_4, + DVBFE_MODCOD_16APSK_4_5, + DVBFE_MODCOD_16APSK_5_6, + DVBFE_MODCOD_16APSK_8_9, + DVBFE_MODCOD_16APSK_9_10, + DVBFE_MODCOD_32APSK_3_4, + DVBFE_MODCOD_32APSK_4_5, + DVBFE_MODCOD_32APSK_5_6, + DVBFE_MODCOD_32APSK_8_9, + DVBFE_MODCOD_32APSK_9_10, + DVBFE_MODCOD_RESERVED_1, + DVBFE_MODCOD_BPSK_1_3, + DVBFE_MODCOD_BPSK_1_4, + DVBFE_MODCOD_RESERVED_2 +}; + +enum tuner_param { + DVBFE_TUNER_FREQUENCY = (1 << 0), + DVBFE_TUNER_TUNERSTEP = (1 << 1), + DVBFE_TUNER_IFFREQ = (1 << 2), + DVBFE_TUNER_BANDWIDTH = (1 << 3), + DVBFE_TUNER_REFCLOCK = (1 << 4), + DVBFE_TUNER_IQSENSE = (1 << 5), + DVBFE_TUNER_DUMMY = (1 << 31) +}; + +/* + * ALGO_HW: (Hardware Algorithm) + * ---------------------------------------------------------------- + * Devices that support this algorithm do everything in hardware + * and no software support is needed to handle them. + * Requesting these devices to LOCK is the only thing required, + * device is supposed to do everything in the hardware. + * + * ALGO_SW: (Software Algorithm) + * ---------------------------------------------------------------- + * These are dumb devices, that require software to do everything + * + * ALGO_CUSTOM: (Customizable Agorithm) + * ---------------------------------------------------------------- + * Devices having this algorithm can be customized to have specific + * algorithms in the frontend driver, rather than simply doing a + * software zig-zag. In this case the zigzag maybe hardware assisted + * or it maybe completely done in hardware. In all cases, usage of + * this algorithm, in conjunction with the search and track + * callbacks, utilizes the driver specific algorithm. + * + * ALGO_RECOVERY: (Recovery Algorithm) + * ---------------------------------------------------------------- + * These devices have AUTO recovery capabilities from LOCK failure + */ +enum dvbfe_algo { + DVBFE_ALGO_HW = (1 << 0), + DVBFE_ALGO_SW = (1 << 1), + DVBFE_ALGO_CUSTOM = (1 << 2), + DVBFE_ALGO_RECOVERY = (1 << 31) +}; + +struct tuner_state { + u32 frequency; + u32 tunerstep; + u32 ifreq; + u32 bandwidth; + u32 iqsense; + u32 refclock; +}; + +/* + * search callback possible return status + * + * DVBFE_ALGO_SEARCH_SUCCESS + * The frontend search algorithm completed and returned successfully + * + * DVBFE_ALGO_SEARCH_ASLEEP + * The frontend search algorithm is sleeping + * + * DVBFE_ALGO_SEARCH_FAILED + * The frontend search for a signal failed + * + * DVBFE_ALGO_SEARCH_INVALID + * The frontend search algorith was probably supplied with invalid + * parameters and the search is an invalid one + * + * DVBFE_ALGO_SEARCH_ERROR + * The frontend search algorithm failed due to some error + * + * DVBFE_ALGO_SEARCH_AGAIN + * The frontend search algorithm was requested to search again + */ +enum dvbfe_search { + DVBFE_ALGO_SEARCH_SUCCESS = (1 << 0), + DVBFE_ALGO_SEARCH_ASLEEP = (1 << 1), + DVBFE_ALGO_SEARCH_FAILED = (1 << 2), + DVBFE_ALGO_SEARCH_INVALID = (1 << 3), + DVBFE_ALGO_SEARCH_AGAIN = (1 << 4), + DVBFE_ALGO_SEARCH_ERROR = (1 << 31), +}; + + +struct dvb_tuner_ops { + + struct dvb_tuner_info info; + + int (*release)(struct dvb_frontend *fe); + int (*init)(struct dvb_frontend *fe); + int (*sleep)(struct dvb_frontend *fe); + + /** This is for simple PLLs - set all parameters in one go. */ + int (*set_params)(struct dvb_frontend *fe); + int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p); + + /** This is support for demods like the mt352 - fills out the supplied buffer with what to write. */ + int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len); + + /** This is to allow setting tuner-specific configs */ + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); + + int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency); + int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth); + int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency); + +#define TUNER_STATUS_LOCKED 1 +#define TUNER_STATUS_STEREO 2 + int (*get_status)(struct dvb_frontend *fe, u32 *status); + int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); + int (*get_afc)(struct dvb_frontend *fe, s32 *afc); + + /** These are provided separately from set_params in order to facilitate silicon + * tuners which require sophisticated tuning loops, controlling each parameter separately. */ + int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); + int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); + + /* + * These are provided separately from set_params in order to facilitate silicon + * tuners which require sophisticated tuning loops, controlling each parameter separately. + */ + int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state); + int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state); +}; + +struct analog_demod_info { + char *name; +}; + +struct analog_demod_ops { + + struct analog_demod_info info; + + void (*set_params)(struct dvb_frontend *fe, + struct analog_parameters *params); + int (*has_signal)(struct dvb_frontend *fe, u16 *signal); + int (*get_afc)(struct dvb_frontend *fe, s32 *afc); + void (*tuner_status)(struct dvb_frontend *fe); + void (*standby)(struct dvb_frontend *fe); + void (*release)(struct dvb_frontend *fe); + int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); + + /** This is to allow setting tuner-specific configuration */ + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); +}; + +struct dtv_frontend_properties; + +struct dvb_frontend_ops { + + struct dvb_frontend_info info; + + u8 delsys[MAX_DELSYS]; + + void (*release)(struct dvb_frontend* fe); + void (*release_sec)(struct dvb_frontend* fe); + + int (*init)(struct dvb_frontend* fe); + int (*sleep)(struct dvb_frontend* fe); + + int (*write)(struct dvb_frontend* fe, const u8 buf[], int len); + + /* if this is set, it overrides the default swzigzag */ + int (*tune)(struct dvb_frontend* fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + fe_status_t *status); + /* get frontend tuning algorithm from the module */ + enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe); + + /* these two are only used for the swzigzag code */ + int (*set_frontend)(struct dvb_frontend *fe); + int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings); + + int (*get_frontend)(struct dvb_frontend *fe); + + int (*read_status)(struct dvb_frontend* fe, fe_status_t* status); + int (*read_ber)(struct dvb_frontend* fe, u32* ber); + int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength); + int (*read_snr)(struct dvb_frontend* fe, u16* snr); + int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks); + + int (*diseqc_reset_overload)(struct dvb_frontend* fe); + int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd); + int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply); + int (*diseqc_send_burst)(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd); + int (*set_tone)(struct dvb_frontend* fe, fe_sec_tone_mode_t tone); + int (*set_voltage)(struct dvb_frontend* fe, fe_sec_voltage_t voltage); + int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg); + int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd); + int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable); + int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire); + int (*set_lna)(struct dvb_frontend *); + + /* These callbacks are for devices that implement their own + * tuning algorithms, rather than a simple swzigzag + */ + enum dvbfe_search (*search)(struct dvb_frontend *fe); + + struct dvb_tuner_ops tuner_ops; + struct analog_demod_ops analog_ops; + + int (*set_property)(struct dvb_frontend* fe, struct dtv_property* tvp); + int (*get_property)(struct dvb_frontend* fe, struct dtv_property* tvp); +}; + +#ifdef __DVB_CORE__ +#define MAX_EVENT 8 + +struct dvb_fe_events { + struct dvb_frontend_event events[MAX_EVENT]; + int eventw; + int eventr; + int overflow; + wait_queue_head_t wait_queue; + struct mutex mtx; +}; +#endif + +struct dtv_frontend_properties { + + /* Cache State */ + u32 state; + + u32 frequency; + fe_modulation_t modulation; + + fe_sec_voltage_t voltage; + fe_sec_tone_mode_t sectone; + fe_spectral_inversion_t inversion; + fe_code_rate_t fec_inner; + fe_transmit_mode_t transmission_mode; + u32 bandwidth_hz; /* 0 = AUTO */ + fe_guard_interval_t guard_interval; + fe_hierarchy_t hierarchy; + u32 symbol_rate; + fe_code_rate_t code_rate_HP; + fe_code_rate_t code_rate_LP; + + fe_pilot_t pilot; + fe_rolloff_t rolloff; + + fe_delivery_system_t delivery_system; + + enum fe_interleaving interleaving; + + /* ISDB-T specifics */ + u8 isdbt_partial_reception; + u8 isdbt_sb_mode; + u8 isdbt_sb_subchannel; + u32 isdbt_sb_segment_idx; + u32 isdbt_sb_segment_count; + u8 isdbt_layer_enabled; + struct { + u8 segment_count; + fe_code_rate_t fec; + fe_modulation_t modulation; + u8 interleaving; + } layer[3]; + + /* Multistream specifics */ + u32 stream_id; + + /* ATSC-MH specifics */ + u8 atscmh_fic_ver; + u8 atscmh_parade_id; + u8 atscmh_nog; + u8 atscmh_tnog; + u8 atscmh_sgn; + u8 atscmh_prc; + + u8 atscmh_rs_frame_mode; + u8 atscmh_rs_frame_ensemble; + u8 atscmh_rs_code_mode_pri; + u8 atscmh_rs_code_mode_sec; + u8 atscmh_sccc_block_mode; + u8 atscmh_sccc_code_mode_a; + u8 atscmh_sccc_code_mode_b; + u8 atscmh_sccc_code_mode_c; + u8 atscmh_sccc_code_mode_d; + + u32 lna; + + /* statistics data */ + struct dtv_fe_stats strength; + struct dtv_fe_stats cnr; + struct dtv_fe_stats pre_bit_error; + struct dtv_fe_stats pre_bit_count; + struct dtv_fe_stats post_bit_error; + struct dtv_fe_stats post_bit_count; + struct dtv_fe_stats block_error; + struct dtv_fe_stats block_count; +}; + +struct dvb_frontend { + struct dvb_frontend_ops ops; + struct dvb_adapter *dvb; + void *demodulator_priv; + void *tuner_priv; + void *frontend_priv; + void *sec_priv; + void *analog_demod_priv; + struct dtv_frontend_properties dtv_property_cache; +#define DVB_FRONTEND_COMPONENT_TUNER 0 +#define DVB_FRONTEND_COMPONENT_DEMOD 1 + int (*callback)(void *adapter_priv, int component, int cmd, int arg); + int id; +}; + +extern int dvb_register_frontend(struct dvb_adapter *dvb, + struct dvb_frontend *fe); + +extern int dvb_unregister_frontend(struct dvb_frontend *fe); + +extern void dvb_frontend_detach(struct dvb_frontend *fe); + +extern void dvb_frontend_reinitialise(struct dvb_frontend *fe); +extern int dvb_frontend_suspend(struct dvb_frontend *fe); +extern int dvb_frontend_resume(struct dvb_frontend *fe); + +extern void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec); +extern s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime); + +#endif diff --git a/drivers/media/dvb-core/dvb_math.c b/drivers/media/dvb-core/dvb_math.c new file mode 100644 index 00000000..beb7c93a --- /dev/null +++ b/drivers/media/dvb-core/dvb_math.c @@ -0,0 +1,145 @@ +/* + * dvb-math provides some complex fixed-point math + * operations shared between the dvb related stuff + * + * Copyright (C) 2006 Christoph Pfister (christophpfister@gmail.com) + * + * This library is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "dvb_math.h" + +static const unsigned short logtable[256] = { + 0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7, + 0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508, + 0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6, + 0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37, + 0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f, + 0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41, + 0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1, + 0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142, + 0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68, + 0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355, + 0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c, + 0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490, + 0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3, + 0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507, + 0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe, + 0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca, + 0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c, + 0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7, + 0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c, + 0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c, + 0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a, + 0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065, + 0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730, + 0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc, + 0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469, + 0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9, + 0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c, + 0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765, + 0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83, + 0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387, + 0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973, + 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 +}; + +unsigned int intlog2(u32 value) +{ + /** + * returns: log2(value) * 2^24 + * wrong result if value = 0 (log2(0) is undefined) + */ + unsigned int msb; + unsigned int logentry; + unsigned int significand; + unsigned int interpolation; + + if (unlikely(value == 0)) { + WARN_ON(1); + return 0; + } + + /* first detect the msb (count begins at 0) */ + msb = fls(value) - 1; + + /** + * now we use a logtable after the following method: + * + * log2(2^x * y) * 2^24 = x * 2^24 + log2(y) * 2^24 + * where x = msb and therefore 1 <= y < 2 + * first y is determined by shifting the value left + * so that msb is bit 31 + * 0x00231f56 -> 0x8C7D5800 + * the result is y * 2^31 -> "significand" + * then the highest 9 bits are used for a table lookup + * the highest bit is discarded because it's always set + * the highest nine bits in our example are 100011000 + * so we would use the entry 0x18 + */ + significand = value << (31 - msb); + logentry = (significand >> 23) & 0xff; + + /** + * last step we do is interpolation because of the + * limitations of the log table the error is that part of + * the significand which isn't used for lookup then we + * compute the ratio between the error and the next table entry + * and interpolate it between the log table entry used and the + * next one the biggest error possible is 0x7fffff + * (in our example it's 0x7D5800) + * needed value for next table entry is 0x800000 + * so the interpolation is + * (error / 0x800000) * (logtable_next - logtable_current) + * in the implementation the division is moved to the end for + * better accuracy there is also an overflow correction if + * logtable_next is 256 + */ + interpolation = ((significand & 0x7fffff) * + ((logtable[(logentry + 1) & 0xff] - + logtable[logentry]) & 0xffff)) >> 15; + + /* now we return the result */ + return ((msb << 24) + (logtable[logentry] << 8) + interpolation); +} +EXPORT_SYMBOL(intlog2); + +unsigned int intlog10(u32 value) +{ + /** + * returns: log10(value) * 2^24 + * wrong result if value = 0 (log10(0) is undefined) + */ + u64 log; + + if (unlikely(value == 0)) { + WARN_ON(1); + return 0; + } + + log = intlog2(value); + + /** + * we use the following method: + * log10(x) = log2(x) * log10(2) + */ + + return (log * 646456993) >> 31; +} +EXPORT_SYMBOL(intlog10); diff --git a/drivers/media/dvb-core/dvb_math.h b/drivers/media/dvb-core/dvb_math.h new file mode 100644 index 00000000..aecc867e --- /dev/null +++ b/drivers/media/dvb-core/dvb_math.h @@ -0,0 +1,58 @@ +/* + * dvb-math provides some complex fixed-point math + * operations shared between the dvb related stuff + * + * Copyright (C) 2006 Christoph Pfister (christophpfister@gmail.com) + * + * This library is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __DVB_MATH_H +#define __DVB_MATH_H + +#include + +/** + * computes log2 of a value; the result is shifted left by 24 bits + * + * to use rational values you can use the following method: + * intlog2(value) = intlog2(value * 2^x) - x * 2^24 + * + * example: intlog2(8) will give 3 << 24 = 3 * 2^24 + * example: intlog2(9) will give 3 << 24 + ... = 3.16... * 2^24 + * example: intlog2(1.5) = intlog2(3) - 2^24 = 0.584... * 2^24 + * + * @param value The value (must be != 0) + * @return log2(value) * 2^24 + */ +extern unsigned int intlog2(u32 value); + +/** + * computes log10 of a value; the result is shifted left by 24 bits + * + * to use rational values you can use the following method: + * intlog10(value) = intlog10(value * 10^x) - x * 2^24 + * + * example: intlog10(1000) will give 3 << 24 = 3 * 2^24 + * due to the implementation intlog10(1000) might be not exactly 3 * 2^24 + * + * look at intlog2 for similar examples + * + * @param value The value (must be != 0) + * @return log10(value) * 2^24 + */ +extern unsigned int intlog10(u32 value); + +#endif diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c new file mode 100644 index 00000000..f91c80c0 --- /dev/null +++ b/drivers/media/dvb-core/dvb_net.c @@ -0,0 +1,1538 @@ +/* + * dvb_net.c + * + * Copyright (C) 2001 Convergence integrated media GmbH + * Ralph Metzler + * Copyright (C) 2002 Ralph Metzler + * + * ULE Decapsulation code: + * Copyright (C) 2003, 2004 gcs - Global Communication & Services GmbH. + * and Department of Scientific Computing + * Paris Lodron University of Salzburg. + * Hilmar Linder + * and Wolfram Stering + * + * ULE Decaps according to RFC 4326. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +/* + * ULE ChangeLog: + * Feb 2004: hl/ws v1: Implementing draft-fair-ipdvb-ule-01.txt + * + * Dec 2004: hl/ws v2: Implementing draft-ietf-ipdvb-ule-03.txt: + * ULE Extension header handling. + * Bugreports by Moritz Vieth and Hanno Tersteegen, + * Fraunhofer Institute for Open Communication Systems + * Competence Center for Advanced Satellite Communications. + * Bugfixes and robustness improvements. + * Filtering on dest MAC addresses, if present (D-Bit = 0) + * ULE_DEBUG compile-time option. + * Apr 2006: cp v3: Bugfixes and compliency with RFC 4326 (ULE) by + * Christian Praehauser , + * Paris Lodron University of Salzburg. + */ + +/* + * FIXME / TODO (dvb_net.c): + * + * Unloading does not work for 2.6.9 kernels: a refcount doesn't go to zero. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_demux.h" +#include "dvb_net.h" + +static int dvb_net_debug; +module_param(dvb_net_debug, int, 0444); +MODULE_PARM_DESC(dvb_net_debug, "enable debug messages"); + +#define dprintk(x...) do { if (dvb_net_debug) printk(x); } while (0) + + +static inline __u32 iov_crc32( __u32 c, struct kvec *iov, unsigned int cnt ) +{ + unsigned int j; + for (j = 0; j < cnt; j++) + c = crc32_be( c, iov[j].iov_base, iov[j].iov_len ); + return c; +} + + +#define DVB_NET_MULTICAST_MAX 10 + +#undef ULE_DEBUG + +#ifdef ULE_DEBUG + +#define MAC_ADDR_PRINTFMT "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x" +#define MAX_ADDR_PRINTFMT_ARGS(macap) (macap)[0],(macap)[1],(macap)[2],(macap)[3],(macap)[4],(macap)[5] + +#define isprint(c) ((c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z') || (c >= '0' && c <= '9')) + +static void hexdump( const unsigned char *buf, unsigned short len ) +{ + char str[80], octet[10]; + int ofs, i, l; + + for (ofs = 0; ofs < len; ofs += 16) { + sprintf( str, "%03d: ", ofs ); + + for (i = 0; i < 16; i++) { + if ((i + ofs) < len) + sprintf( octet, "%02x ", buf[ofs + i] ); + else + strcpy( octet, " " ); + + strcat( str, octet ); + } + strcat( str, " " ); + l = strlen( str ); + + for (i = 0; (i < 16) && ((i + ofs) < len); i++) + str[l++] = isprint( buf[ofs + i] ) ? buf[ofs + i] : '.'; + + str[l] = '\0'; + printk( KERN_WARNING "%s\n", str ); + } +} + +#endif + +struct dvb_net_priv { + int in_use; + u16 pid; + struct net_device *net; + struct dvb_net *host; + struct dmx_demux *demux; + struct dmx_section_feed *secfeed; + struct dmx_section_filter *secfilter; + struct dmx_ts_feed *tsfeed; + int multi_num; + struct dmx_section_filter *multi_secfilter[DVB_NET_MULTICAST_MAX]; + unsigned char multi_macs[DVB_NET_MULTICAST_MAX][6]; + int rx_mode; +#define RX_MODE_UNI 0 +#define RX_MODE_MULTI 1 +#define RX_MODE_ALL_MULTI 2 +#define RX_MODE_PROMISC 3 + struct work_struct set_multicast_list_wq; + struct work_struct restart_net_feed_wq; + unsigned char feedtype; /* Either FEED_TYPE_ or FEED_TYPE_ULE */ + int need_pusi; /* Set to 1, if synchronization on PUSI required. */ + unsigned char tscc; /* TS continuity counter after sync on PUSI. */ + struct sk_buff *ule_skb; /* ULE SNDU decodes into this buffer. */ + unsigned char *ule_next_hdr; /* Pointer into skb to next ULE extension header. */ + unsigned short ule_sndu_len; /* ULE SNDU length in bytes, w/o D-Bit. */ + unsigned short ule_sndu_type; /* ULE SNDU type field, complete. */ + unsigned char ule_sndu_type_1; /* ULE SNDU type field, if split across 2 TS cells. */ + unsigned char ule_dbit; /* Whether the DestMAC address present + * or not (bit is set). */ + unsigned char ule_bridged; /* Whether the ULE_BRIDGED extension header was found. */ + int ule_sndu_remain; /* Nr. of bytes still required for current ULE SNDU. */ + unsigned long ts_count; /* Current ts cell counter. */ + struct mutex mutex; +}; + + +/** + * Determine the packet's protocol ID. The rule here is that we + * assume 802.3 if the type field is short enough to be a length. + * This is normal practice and works for any 'now in use' protocol. + * + * stolen from eth.c out of the linux kernel, hacked for dvb-device + * by Michael Holzt + */ +static __be16 dvb_net_eth_type_trans(struct sk_buff *skb, + struct net_device *dev) +{ + struct ethhdr *eth; + unsigned char *rawp; + + skb_reset_mac_header(skb); + skb_pull(skb,dev->hard_header_len); + eth = eth_hdr(skb); + + if (*eth->h_dest & 1) { + if(memcmp(eth->h_dest,dev->broadcast, ETH_ALEN)==0) + skb->pkt_type=PACKET_BROADCAST; + else + skb->pkt_type=PACKET_MULTICAST; + } + + if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN) + return eth->h_proto; + + rawp = skb->data; + + /** + * This is a magic hack to spot IPX packets. Older Novell breaks + * the protocol design and runs IPX over 802.3 without an 802.2 LLC + * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This + * won't work for fault tolerant netware but does for the rest. + */ + if (*(unsigned short *)rawp == 0xFFFF) + return htons(ETH_P_802_3); + + /** + * Real 802.2 LLC + */ + return htons(ETH_P_802_2); +} + +#define TS_SZ 188 +#define TS_SYNC 0x47 +#define TS_TEI 0x80 +#define TS_SC 0xC0 +#define TS_PUSI 0x40 +#define TS_AF_A 0x20 +#define TS_AF_D 0x10 + +/* ULE Extension Header handlers. */ + +#define ULE_TEST 0 +#define ULE_BRIDGED 1 + +#define ULE_OPTEXTHDR_PADDING 0 + +static int ule_test_sndu( struct dvb_net_priv *p ) +{ + return -1; +} + +static int ule_bridged_sndu( struct dvb_net_priv *p ) +{ + struct ethhdr *hdr = (struct ethhdr*) p->ule_next_hdr; + if(ntohs(hdr->h_proto) < ETH_P_802_3_MIN) { + int framelen = p->ule_sndu_len - ((p->ule_next_hdr+sizeof(struct ethhdr)) - p->ule_skb->data); + /* A frame Type < ETH_P_802_3_MIN for a bridged frame, introduces a LLC Length field. */ + if(framelen != ntohs(hdr->h_proto)) { + return -1; + } + } + /* Note: + * From RFC4326: + * "A bridged SNDU is a Mandatory Extension Header of Type 1. + * It must be the final (or only) extension header specified in the header chain of a SNDU." + * The 'ule_bridged' flag will cause the extension header processing loop to terminate. + */ + p->ule_bridged = 1; + return 0; +} + +static int ule_exthdr_padding(struct dvb_net_priv *p) +{ + return 0; +} + +/** Handle ULE extension headers. + * Function is called after a successful CRC32 verification of an ULE SNDU to complete its decoding. + * Returns: >= 0: nr. of bytes consumed by next extension header + * -1: Mandatory extension header that is not recognized or TEST SNDU; discard. + */ +static int handle_one_ule_extension( struct dvb_net_priv *p ) +{ + /* Table of mandatory extension header handlers. The header type is the index. */ + static int (*ule_mandatory_ext_handlers[255])( struct dvb_net_priv *p ) = + { [0] = ule_test_sndu, [1] = ule_bridged_sndu, [2] = NULL, }; + + /* Table of optional extension header handlers. The header type is the index. */ + static int (*ule_optional_ext_handlers[255])( struct dvb_net_priv *p ) = + { [0] = ule_exthdr_padding, [1] = NULL, }; + + int ext_len = 0; + unsigned char hlen = (p->ule_sndu_type & 0x0700) >> 8; + unsigned char htype = p->ule_sndu_type & 0x00FF; + + /* Discriminate mandatory and optional extension headers. */ + if (hlen == 0) { + /* Mandatory extension header */ + if (ule_mandatory_ext_handlers[htype]) { + ext_len = ule_mandatory_ext_handlers[htype]( p ); + if(ext_len >= 0) { + p->ule_next_hdr += ext_len; + if (!p->ule_bridged) { + p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr); + p->ule_next_hdr += 2; + } else { + p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); + /* This assures the extension handling loop will terminate. */ + } + } + // else: extension handler failed or SNDU should be discarded + } else + ext_len = -1; /* SNDU has to be discarded. */ + } else { + /* Optional extension header. Calculate the length. */ + ext_len = hlen << 1; + /* Process the optional extension header according to its type. */ + if (ule_optional_ext_handlers[htype]) + (void)ule_optional_ext_handlers[htype]( p ); + p->ule_next_hdr += ext_len; + p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) ); + /* + * note: the length of the next header type is included in the + * length of THIS optional extension header + */ + } + + return ext_len; +} + +static int handle_ule_extensions( struct dvb_net_priv *p ) +{ + int total_ext_len = 0, l; + + p->ule_next_hdr = p->ule_skb->data; + do { + l = handle_one_ule_extension( p ); + if (l < 0) + return l; /* Stop extension header processing and discard SNDU. */ + total_ext_len += l; +#ifdef ULE_DEBUG + dprintk("handle_ule_extensions: ule_next_hdr=%p, ule_sndu_type=%i, " + "l=%i, total_ext_len=%i\n", p->ule_next_hdr, + (int) p->ule_sndu_type, l, total_ext_len); +#endif + + } while (p->ule_sndu_type < ETH_P_802_3_MIN); + + return total_ext_len; +} + + +/** Prepare for a new ULE SNDU: reset the decoder state. */ +static inline void reset_ule( struct dvb_net_priv *p ) +{ + p->ule_skb = NULL; + p->ule_next_hdr = NULL; + p->ule_sndu_len = 0; + p->ule_sndu_type = 0; + p->ule_sndu_type_1 = 0; + p->ule_sndu_remain = 0; + p->ule_dbit = 0xFF; + p->ule_bridged = 0; +} + +/** + * Decode ULE SNDUs according to draft-ietf-ipdvb-ule-03.txt from a sequence of + * TS cells of a single PID. + */ +static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) +{ + struct dvb_net_priv *priv = netdev_priv(dev); + unsigned long skipped = 0L; + const u8 *ts, *ts_end, *from_where = NULL; + u8 ts_remain = 0, how_much = 0, new_ts = 1; + struct ethhdr *ethh = NULL; + bool error = false; + +#ifdef ULE_DEBUG + /* The code inside ULE_DEBUG keeps a history of the last 100 TS cells processed. */ + static unsigned char ule_hist[100*TS_SZ]; + static unsigned char *ule_where = ule_hist, ule_dump; +#endif + + /* For all TS cells in current buffer. + * Appearently, we are called for every single TS cell. + */ + for (ts = buf, ts_end = buf + buf_len; ts < ts_end; /* no default incr. */ ) { + + if (new_ts) { + /* We are about to process a new TS cell. */ + +#ifdef ULE_DEBUG + if (ule_where >= &ule_hist[100*TS_SZ]) ule_where = ule_hist; + memcpy( ule_where, ts, TS_SZ ); + if (ule_dump) { + hexdump( ule_where, TS_SZ ); + ule_dump = 0; + } + ule_where += TS_SZ; +#endif + + /* Check TS error conditions: sync_byte, transport_error_indicator, scrambling_control . */ + if ((ts[0] != TS_SYNC) || (ts[1] & TS_TEI) || ((ts[3] & TS_SC) != 0)) { + printk(KERN_WARNING "%lu: Invalid TS cell: SYNC %#x, TEI %u, SC %#x.\n", + priv->ts_count, ts[0], ts[1] & TS_TEI >> 7, ts[3] & 0xC0 >> 6); + + /* Drop partly decoded SNDU, reset state, resync on PUSI. */ + if (priv->ule_skb) { + dev_kfree_skb( priv->ule_skb ); + /* Prepare for next SNDU. */ + dev->stats.rx_errors++; + dev->stats.rx_frame_errors++; + } + reset_ule(priv); + priv->need_pusi = 1; + + /* Continue with next TS cell. */ + ts += TS_SZ; + priv->ts_count++; + continue; + } + + ts_remain = 184; + from_where = ts + 4; + } + /* Synchronize on PUSI, if required. */ + if (priv->need_pusi) { + if (ts[1] & TS_PUSI) { + /* Find beginning of first ULE SNDU in current TS cell. */ + /* Synchronize continuity counter. */ + priv->tscc = ts[3] & 0x0F; + /* There is a pointer field here. */ + if (ts[4] > ts_remain) { + printk(KERN_ERR "%lu: Invalid ULE packet " + "(pointer field %d)\n", priv->ts_count, ts[4]); + ts += TS_SZ; + priv->ts_count++; + continue; + } + /* Skip to destination of pointer field. */ + from_where = &ts[5] + ts[4]; + ts_remain -= 1 + ts[4]; + skipped = 0; + } else { + skipped++; + ts += TS_SZ; + priv->ts_count++; + continue; + } + } + + if (new_ts) { + /* Check continuity counter. */ + if ((ts[3] & 0x0F) == priv->tscc) + priv->tscc = (priv->tscc + 1) & 0x0F; + else { + /* TS discontinuity handling: */ + printk(KERN_WARNING "%lu: TS discontinuity: got %#x, " + "expected %#x.\n", priv->ts_count, ts[3] & 0x0F, priv->tscc); + /* Drop partly decoded SNDU, reset state, resync on PUSI. */ + if (priv->ule_skb) { + dev_kfree_skb( priv->ule_skb ); + /* Prepare for next SNDU. */ + // reset_ule(priv); moved to below. + dev->stats.rx_errors++; + dev->stats.rx_frame_errors++; + } + reset_ule(priv); + /* skip to next PUSI. */ + priv->need_pusi = 1; + continue; + } + /* If we still have an incomplete payload, but PUSI is + * set; some TS cells are missing. + * This is only possible here, if we missed exactly 16 TS + * cells (continuity counter wrap). */ + if (ts[1] & TS_PUSI) { + if (! priv->need_pusi) { + if (!(*from_where < (ts_remain-1)) || *from_where != priv->ule_sndu_remain) { + /* Pointer field is invalid. Drop this TS cell and any started ULE SNDU. */ + printk(KERN_WARNING "%lu: Invalid pointer " + "field: %u.\n", priv->ts_count, *from_where); + + /* Drop partly decoded SNDU, reset state, resync on PUSI. */ + if (priv->ule_skb) { + error = true; + dev_kfree_skb(priv->ule_skb); + } + + if (error || priv->ule_sndu_remain) { + dev->stats.rx_errors++; + dev->stats.rx_frame_errors++; + error = false; + } + + reset_ule(priv); + priv->need_pusi = 1; + continue; + } + /* Skip pointer field (we're processing a + * packed payload). */ + from_where += 1; + ts_remain -= 1; + } else + priv->need_pusi = 0; + + if (priv->ule_sndu_remain > 183) { + /* Current SNDU lacks more data than there could be available in the + * current TS cell. */ + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; + printk(KERN_WARNING "%lu: Expected %d more SNDU bytes, but " + "got PUSI (pf %d, ts_remain %d). Flushing incomplete payload.\n", + priv->ts_count, priv->ule_sndu_remain, ts[4], ts_remain); + dev_kfree_skb(priv->ule_skb); + /* Prepare for next SNDU. */ + reset_ule(priv); + /* Resync: go to where pointer field points to: start of next ULE SNDU. */ + from_where += ts[4]; + ts_remain -= ts[4]; + } + } + } + + /* Check if new payload needs to be started. */ + if (priv->ule_skb == NULL) { + /* Start a new payload with skb. + * Find ULE header. It is only guaranteed that the + * length field (2 bytes) is contained in the current + * TS. + * Check ts_remain has to be >= 2 here. */ + if (ts_remain < 2) { + printk(KERN_WARNING "Invalid payload packing: only %d " + "bytes left in TS. Resyncing.\n", ts_remain); + priv->ule_sndu_len = 0; + priv->need_pusi = 1; + ts += TS_SZ; + continue; + } + + if (! priv->ule_sndu_len) { + /* Got at least two bytes, thus extrace the SNDU length. */ + priv->ule_sndu_len = from_where[0] << 8 | from_where[1]; + if (priv->ule_sndu_len & 0x8000) { + /* D-Bit is set: no dest mac present. */ + priv->ule_sndu_len &= 0x7FFF; + priv->ule_dbit = 1; + } else + priv->ule_dbit = 0; + + if (priv->ule_sndu_len < 5) { + printk(KERN_WARNING "%lu: Invalid ULE SNDU length %u. " + "Resyncing.\n", priv->ts_count, priv->ule_sndu_len); + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; + priv->ule_sndu_len = 0; + priv->need_pusi = 1; + new_ts = 1; + ts += TS_SZ; + priv->ts_count++; + continue; + } + ts_remain -= 2; /* consume the 2 bytes SNDU length. */ + from_where += 2; + } + + priv->ule_sndu_remain = priv->ule_sndu_len + 2; + /* + * State of current TS: + * ts_remain (remaining bytes in the current TS cell) + * 0 ule_type is not available now, we need the next TS cell + * 1 the first byte of the ule_type is present + * >=2 full ULE header present, maybe some payload data as well. + */ + switch (ts_remain) { + case 1: + priv->ule_sndu_remain--; + priv->ule_sndu_type = from_where[0] << 8; + priv->ule_sndu_type_1 = 1; /* first byte of ule_type is set. */ + ts_remain -= 1; from_where += 1; + /* Continue w/ next TS. */ + case 0: + new_ts = 1; + ts += TS_SZ; + priv->ts_count++; + continue; + + default: /* complete ULE header is present in current TS. */ + /* Extract ULE type field. */ + if (priv->ule_sndu_type_1) { + priv->ule_sndu_type_1 = 0; + priv->ule_sndu_type |= from_where[0]; + from_where += 1; /* points to payload start. */ + ts_remain -= 1; + } else { + /* Complete type is present in new TS. */ + priv->ule_sndu_type = from_where[0] << 8 | from_where[1]; + from_where += 2; /* points to payload start. */ + ts_remain -= 2; + } + break; + } + + /* Allocate the skb (decoder target buffer) with the correct size, as follows: + * prepare for the largest case: bridged SNDU with MAC address (dbit = 0). */ + priv->ule_skb = dev_alloc_skb( priv->ule_sndu_len + ETH_HLEN + ETH_ALEN ); + if (priv->ule_skb == NULL) { + printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", + dev->name); + dev->stats.rx_dropped++; + return; + } + + /* This includes the CRC32 _and_ dest mac, if !dbit. */ + priv->ule_sndu_remain = priv->ule_sndu_len; + priv->ule_skb->dev = dev; + /* Leave space for Ethernet or bridged SNDU header (eth hdr plus one MAC addr). */ + skb_reserve( priv->ule_skb, ETH_HLEN + ETH_ALEN ); + } + + /* Copy data into our current skb. */ + how_much = min(priv->ule_sndu_remain, (int)ts_remain); + memcpy(skb_put(priv->ule_skb, how_much), from_where, how_much); + priv->ule_sndu_remain -= how_much; + ts_remain -= how_much; + from_where += how_much; + + /* Check for complete payload. */ + if (priv->ule_sndu_remain <= 0) { + /* Check CRC32, we've got it in our skb already. */ + __be16 ulen = htons(priv->ule_sndu_len); + __be16 utype = htons(priv->ule_sndu_type); + const u8 *tail; + struct kvec iov[3] = { + { &ulen, sizeof ulen }, + { &utype, sizeof utype }, + { priv->ule_skb->data, priv->ule_skb->len - 4 } + }; + u32 ule_crc = ~0L, expected_crc; + if (priv->ule_dbit) { + /* Set D-bit for CRC32 verification, + * if it was set originally. */ + ulen |= htons(0x8000); + } + + ule_crc = iov_crc32(ule_crc, iov, 3); + tail = skb_tail_pointer(priv->ule_skb); + expected_crc = *(tail - 4) << 24 | + *(tail - 3) << 16 | + *(tail - 2) << 8 | + *(tail - 1); + if (ule_crc != expected_crc) { + printk(KERN_WARNING "%lu: CRC32 check FAILED: %08x / %08x, SNDU len %d type %#x, ts_remain %d, next 2: %x.\n", + priv->ts_count, ule_crc, expected_crc, priv->ule_sndu_len, priv->ule_sndu_type, ts_remain, ts_remain > 2 ? *(unsigned short *)from_where : 0); + +#ifdef ULE_DEBUG + hexdump( iov[0].iov_base, iov[0].iov_len ); + hexdump( iov[1].iov_base, iov[1].iov_len ); + hexdump( iov[2].iov_base, iov[2].iov_len ); + + if (ule_where == ule_hist) { + hexdump( &ule_hist[98*TS_SZ], TS_SZ ); + hexdump( &ule_hist[99*TS_SZ], TS_SZ ); + } else if (ule_where == &ule_hist[TS_SZ]) { + hexdump( &ule_hist[99*TS_SZ], TS_SZ ); + hexdump( ule_hist, TS_SZ ); + } else { + hexdump( ule_where - TS_SZ - TS_SZ, TS_SZ ); + hexdump( ule_where - TS_SZ, TS_SZ ); + } + ule_dump = 1; +#endif + + dev->stats.rx_errors++; + dev->stats.rx_crc_errors++; + dev_kfree_skb(priv->ule_skb); + } else { + /* CRC32 verified OK. */ + u8 dest_addr[ETH_ALEN]; + static const u8 bc_addr[ETH_ALEN] = + { [ 0 ... ETH_ALEN-1] = 0xff }; + + /* CRC32 was OK. Remove it from skb. */ + priv->ule_skb->tail -= 4; + priv->ule_skb->len -= 4; + + if (!priv->ule_dbit) { + /* + * The destination MAC address is the + * next data in the skb. It comes + * before any extension headers. + * + * Check if the payload of this SNDU + * should be passed up the stack. + */ + register int drop = 0; + if (priv->rx_mode != RX_MODE_PROMISC) { + if (priv->ule_skb->data[0] & 0x01) { + /* multicast or broadcast */ + if (memcmp(priv->ule_skb->data, bc_addr, ETH_ALEN)) { + /* multicast */ + if (priv->rx_mode == RX_MODE_MULTI) { + int i; + for(i = 0; i < priv->multi_num && memcmp(priv->ule_skb->data, priv->multi_macs[i], ETH_ALEN); i++) + ; + if (i == priv->multi_num) + drop = 1; + } else if (priv->rx_mode != RX_MODE_ALL_MULTI) + drop = 1; /* no broadcast; */ + /* else: all multicast mode: accept all multicast packets */ + } + /* else: broadcast */ + } + else if (memcmp(priv->ule_skb->data, dev->dev_addr, ETH_ALEN)) + drop = 1; + /* else: destination address matches the MAC address of our receiver device */ + } + /* else: promiscuous mode; pass everything up the stack */ + + if (drop) { +#ifdef ULE_DEBUG + dprintk("Dropping SNDU: MAC destination address does not match: dest addr: "MAC_ADDR_PRINTFMT", dev addr: "MAC_ADDR_PRINTFMT"\n", + MAX_ADDR_PRINTFMT_ARGS(priv->ule_skb->data), MAX_ADDR_PRINTFMT_ARGS(dev->dev_addr)); +#endif + dev_kfree_skb(priv->ule_skb); + goto sndu_done; + } + else + { + skb_copy_from_linear_data(priv->ule_skb, + dest_addr, + ETH_ALEN); + skb_pull(priv->ule_skb, ETH_ALEN); + } + } + + /* Handle ULE Extension Headers. */ + if (priv->ule_sndu_type < ETH_P_802_3_MIN) { + /* There is an extension header. Handle it accordingly. */ + int l = handle_ule_extensions(priv); + if (l < 0) { + /* Mandatory extension header unknown or TEST SNDU. Drop it. */ + // printk( KERN_WARNING "Dropping SNDU, extension headers.\n" ); + dev_kfree_skb(priv->ule_skb); + goto sndu_done; + } + skb_pull(priv->ule_skb, l); + } + + /* + * Construct/assure correct ethernet header. + * Note: in bridged mode (priv->ule_bridged != + * 0) we already have the (original) ethernet + * header at the start of the payload (after + * optional dest. address and any extension + * headers). + */ + + if (!priv->ule_bridged) { + skb_push(priv->ule_skb, ETH_HLEN); + ethh = (struct ethhdr *)priv->ule_skb->data; + if (!priv->ule_dbit) { + /* dest_addr buffer is only valid if priv->ule_dbit == 0 */ + memcpy(ethh->h_dest, dest_addr, ETH_ALEN); + memset(ethh->h_source, 0, ETH_ALEN); + } + else /* zeroize source and dest */ + memset( ethh, 0, ETH_ALEN*2 ); + + ethh->h_proto = htons(priv->ule_sndu_type); + } + /* else: skb is in correct state; nothing to do. */ + priv->ule_bridged = 0; + + /* Stuff into kernel's protocol stack. */ + priv->ule_skb->protocol = dvb_net_eth_type_trans(priv->ule_skb, dev); + /* If D-bit is set (i.e. destination MAC address not present), + * receive the packet anyhow. */ + /* if (priv->ule_dbit && skb->pkt_type == PACKET_OTHERHOST) + priv->ule_skb->pkt_type = PACKET_HOST; */ + dev->stats.rx_packets++; + dev->stats.rx_bytes += priv->ule_skb->len; + netif_rx(priv->ule_skb); + } + sndu_done: + /* Prepare for next SNDU. */ + reset_ule(priv); + } + + /* More data in current TS (look at the bytes following the CRC32)? */ + if (ts_remain >= 2 && *((unsigned short *)from_where) != 0xFFFF) { + /* Next ULE SNDU starts right there. */ + new_ts = 0; + priv->ule_skb = NULL; + priv->ule_sndu_type_1 = 0; + priv->ule_sndu_len = 0; + // printk(KERN_WARNING "More data in current TS: [%#x %#x %#x %#x]\n", + // *(from_where + 0), *(from_where + 1), + // *(from_where + 2), *(from_where + 3)); + // printk(KERN_WARNING "ts @ %p, stopped @ %p:\n", ts, from_where + 0); + // hexdump(ts, 188); + } else { + new_ts = 1; + ts += TS_SZ; + priv->ts_count++; + if (priv->ule_skb == NULL) { + priv->need_pusi = 1; + priv->ule_sndu_type_1 = 0; + priv->ule_sndu_len = 0; + } + } + } /* for all available TS cells */ +} + +static int dvb_net_ts_callback(const u8 *buffer1, size_t buffer1_len, + const u8 *buffer2, size_t buffer2_len, + struct dmx_ts_feed *feed, enum dmx_success success) +{ + struct net_device *dev = feed->priv; + + if (buffer2) + printk(KERN_WARNING "buffer2 not NULL: %p.\n", buffer2); + if (buffer1_len > 32768) + printk(KERN_WARNING "length > 32k: %zu.\n", buffer1_len); + /* printk("TS callback: %u bytes, %u TS cells @ %p.\n", + buffer1_len, buffer1_len / TS_SZ, buffer1); */ + dvb_net_ule(dev, buffer1, buffer1_len); + return 0; +} + + +static void dvb_net_sec(struct net_device *dev, + const u8 *pkt, int pkt_len) +{ + u8 *eth; + struct sk_buff *skb; + struct net_device_stats *stats = &dev->stats; + int snap = 0; + + /* note: pkt_len includes a 32bit checksum */ + if (pkt_len < 16) { + printk("%s: IP/MPE packet length = %d too small.\n", + dev->name, pkt_len); + stats->rx_errors++; + stats->rx_length_errors++; + return; + } +/* it seems some ISPs manage to screw up here, so we have to + * relax the error checks... */ +#if 0 + if ((pkt[5] & 0xfd) != 0xc1) { + /* drop scrambled or broken packets */ +#else + if ((pkt[5] & 0x3c) != 0x00) { + /* drop scrambled */ +#endif + stats->rx_errors++; + stats->rx_crc_errors++; + return; + } + if (pkt[5] & 0x02) { + /* handle LLC/SNAP, see rfc-1042 */ + if (pkt_len < 24 || memcmp(&pkt[12], "\xaa\xaa\x03\0\0\0", 6)) { + stats->rx_dropped++; + return; + } + snap = 8; + } + if (pkt[7]) { + /* FIXME: assemble datagram from multiple sections */ + stats->rx_errors++; + stats->rx_frame_errors++; + return; + } + + /* we have 14 byte ethernet header (ip header follows); + * 12 byte MPE header; 4 byte checksum; + 2 byte alignment, 8 byte LLC/SNAP + */ + if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2 - snap))) { + //printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); + stats->rx_dropped++; + return; + } + skb_reserve(skb, 2); /* longword align L3 header */ + skb->dev = dev; + + /* copy L3 payload */ + eth = (u8 *) skb_put(skb, pkt_len - 12 - 4 + 14 - snap); + memcpy(eth + 14, pkt + 12 + snap, pkt_len - 12 - 4 - snap); + + /* create ethernet header: */ + eth[0]=pkt[0x0b]; + eth[1]=pkt[0x0a]; + eth[2]=pkt[0x09]; + eth[3]=pkt[0x08]; + eth[4]=pkt[0x04]; + eth[5]=pkt[0x03]; + + eth[6]=eth[7]=eth[8]=eth[9]=eth[10]=eth[11]=0; + + if (snap) { + eth[12] = pkt[18]; + eth[13] = pkt[19]; + } else { + /* protocol numbers are from rfc-1700 or + * http://www.iana.org/assignments/ethernet-numbers + */ + if (pkt[12] >> 4 == 6) { /* version field from IP header */ + eth[12] = 0x86; /* IPv6 */ + eth[13] = 0xdd; + } else { + eth[12] = 0x08; /* IPv4 */ + eth[13] = 0x00; + } + } + + skb->protocol = dvb_net_eth_type_trans(skb, dev); + + stats->rx_packets++; + stats->rx_bytes+=skb->len; + netif_rx(skb); +} + +static int dvb_net_sec_callback(const u8 *buffer1, size_t buffer1_len, + const u8 *buffer2, size_t buffer2_len, + struct dmx_section_filter *filter, + enum dmx_success success) +{ + struct net_device *dev = filter->priv; + + /** + * we rely on the DVB API definition where exactly one complete + * section is delivered in buffer1 + */ + dvb_net_sec (dev, buffer1, buffer1_len); + return 0; +} + +static int dvb_net_tx(struct sk_buff *skb, struct net_device *dev) +{ + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +static u8 mask_normal[6]={0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; +static u8 mask_allmulti[6]={0xff, 0xff, 0xff, 0x00, 0x00, 0x00}; +static u8 mac_allmulti[6]={0x01, 0x00, 0x5e, 0x00, 0x00, 0x00}; +static u8 mask_promisc[6]={0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + +static int dvb_net_filter_sec_set(struct net_device *dev, + struct dmx_section_filter **secfilter, + u8 *mac, u8 *mac_mask) +{ + struct dvb_net_priv *priv = netdev_priv(dev); + int ret; + + *secfilter=NULL; + ret = priv->secfeed->allocate_filter(priv->secfeed, secfilter); + if (ret<0) { + printk("%s: could not get filter\n", dev->name); + return ret; + } + + (*secfilter)->priv=(void *) dev; + + memset((*secfilter)->filter_value, 0x00, DMX_MAX_FILTER_SIZE); + memset((*secfilter)->filter_mask, 0x00, DMX_MAX_FILTER_SIZE); + memset((*secfilter)->filter_mode, 0xff, DMX_MAX_FILTER_SIZE); + + (*secfilter)->filter_value[0]=0x3e; + (*secfilter)->filter_value[3]=mac[5]; + (*secfilter)->filter_value[4]=mac[4]; + (*secfilter)->filter_value[8]=mac[3]; + (*secfilter)->filter_value[9]=mac[2]; + (*secfilter)->filter_value[10]=mac[1]; + (*secfilter)->filter_value[11]=mac[0]; + + (*secfilter)->filter_mask[0] = 0xff; + (*secfilter)->filter_mask[3] = mac_mask[5]; + (*secfilter)->filter_mask[4] = mac_mask[4]; + (*secfilter)->filter_mask[8] = mac_mask[3]; + (*secfilter)->filter_mask[9] = mac_mask[2]; + (*secfilter)->filter_mask[10] = mac_mask[1]; + (*secfilter)->filter_mask[11]=mac_mask[0]; + + dprintk("%s: filter mac=%pM\n", dev->name, mac); + dprintk("%s: filter mask=%pM\n", dev->name, mac_mask); + + return 0; +} + +static int dvb_net_feed_start(struct net_device *dev) +{ + int ret = 0, i; + struct dvb_net_priv *priv = netdev_priv(dev); + struct dmx_demux *demux = priv->demux; + unsigned char *mac = (unsigned char *) dev->dev_addr; + + dprintk("%s: rx_mode %i\n", __func__, priv->rx_mode); + mutex_lock(&priv->mutex); + if (priv->tsfeed || priv->secfeed || priv->secfilter || priv->multi_secfilter[0]) + printk("%s: BUG %d\n", __func__, __LINE__); + + priv->secfeed=NULL; + priv->secfilter=NULL; + priv->tsfeed = NULL; + + if (priv->feedtype == DVB_NET_FEEDTYPE_MPE) { + dprintk("%s: alloc secfeed\n", __func__); + ret=demux->allocate_section_feed(demux, &priv->secfeed, + dvb_net_sec_callback); + if (ret<0) { + printk("%s: could not allocate section feed\n", dev->name); + goto error; + } + + ret = priv->secfeed->set(priv->secfeed, priv->pid, 32768, 1); + + if (ret<0) { + printk("%s: could not set section feed\n", dev->name); + priv->demux->release_section_feed(priv->demux, priv->secfeed); + priv->secfeed=NULL; + goto error; + } + + if (priv->rx_mode != RX_MODE_PROMISC) { + dprintk("%s: set secfilter\n", __func__); + dvb_net_filter_sec_set(dev, &priv->secfilter, mac, mask_normal); + } + + switch (priv->rx_mode) { + case RX_MODE_MULTI: + for (i = 0; i < priv->multi_num; i++) { + dprintk("%s: set multi_secfilter[%d]\n", __func__, i); + dvb_net_filter_sec_set(dev, &priv->multi_secfilter[i], + priv->multi_macs[i], mask_normal); + } + break; + case RX_MODE_ALL_MULTI: + priv->multi_num=1; + dprintk("%s: set multi_secfilter[0]\n", __func__); + dvb_net_filter_sec_set(dev, &priv->multi_secfilter[0], + mac_allmulti, mask_allmulti); + break; + case RX_MODE_PROMISC: + priv->multi_num=0; + dprintk("%s: set secfilter\n", __func__); + dvb_net_filter_sec_set(dev, &priv->secfilter, mac, mask_promisc); + break; + } + + dprintk("%s: start filtering\n", __func__); + priv->secfeed->start_filtering(priv->secfeed); + } else if (priv->feedtype == DVB_NET_FEEDTYPE_ULE) { + struct timespec timeout = { 0, 10000000 }; // 10 msec + + /* we have payloads encapsulated in TS */ + dprintk("%s: alloc tsfeed\n", __func__); + ret = demux->allocate_ts_feed(demux, &priv->tsfeed, dvb_net_ts_callback); + if (ret < 0) { + printk("%s: could not allocate ts feed\n", dev->name); + goto error; + } + + /* Set netdevice pointer for ts decaps callback. */ + priv->tsfeed->priv = (void *)dev; + ret = priv->tsfeed->set(priv->tsfeed, + priv->pid, /* pid */ + TS_PACKET, /* type */ + DMX_PES_OTHER, /* pes type */ + 32768, /* circular buffer size */ + timeout /* timeout */ + ); + + if (ret < 0) { + printk("%s: could not set ts feed\n", dev->name); + priv->demux->release_ts_feed(priv->demux, priv->tsfeed); + priv->tsfeed = NULL; + goto error; + } + + dprintk("%s: start filtering\n", __func__); + priv->tsfeed->start_filtering(priv->tsfeed); + } else + ret = -EINVAL; + +error: + mutex_unlock(&priv->mutex); + return ret; +} + +static int dvb_net_feed_stop(struct net_device *dev) +{ + struct dvb_net_priv *priv = netdev_priv(dev); + int i, ret = 0; + + dprintk("%s\n", __func__); + mutex_lock(&priv->mutex); + if (priv->feedtype == DVB_NET_FEEDTYPE_MPE) { + if (priv->secfeed) { + if (priv->secfeed->is_filtering) { + dprintk("%s: stop secfeed\n", __func__); + priv->secfeed->stop_filtering(priv->secfeed); + } + + if (priv->secfilter) { + dprintk("%s: release secfilter\n", __func__); + priv->secfeed->release_filter(priv->secfeed, + priv->secfilter); + priv->secfilter=NULL; + } + + for (i=0; imulti_num; i++) { + if (priv->multi_secfilter[i]) { + dprintk("%s: release multi_filter[%d]\n", + __func__, i); + priv->secfeed->release_filter(priv->secfeed, + priv->multi_secfilter[i]); + priv->multi_secfilter[i] = NULL; + } + } + + priv->demux->release_section_feed(priv->demux, priv->secfeed); + priv->secfeed = NULL; + } else + printk("%s: no feed to stop\n", dev->name); + } else if (priv->feedtype == DVB_NET_FEEDTYPE_ULE) { + if (priv->tsfeed) { + if (priv->tsfeed->is_filtering) { + dprintk("%s: stop tsfeed\n", __func__); + priv->tsfeed->stop_filtering(priv->tsfeed); + } + priv->demux->release_ts_feed(priv->demux, priv->tsfeed); + priv->tsfeed = NULL; + } + else + printk("%s: no ts feed to stop\n", dev->name); + } else + ret = -EINVAL; + mutex_unlock(&priv->mutex); + return ret; +} + + +static int dvb_set_mc_filter(struct net_device *dev, unsigned char *addr) +{ + struct dvb_net_priv *priv = netdev_priv(dev); + + if (priv->multi_num == DVB_NET_MULTICAST_MAX) + return -ENOMEM; + + memcpy(priv->multi_macs[priv->multi_num], addr, ETH_ALEN); + + priv->multi_num++; + return 0; +} + + +static void wq_set_multicast_list (struct work_struct *work) +{ + struct dvb_net_priv *priv = + container_of(work, struct dvb_net_priv, set_multicast_list_wq); + struct net_device *dev = priv->net; + + dvb_net_feed_stop(dev); + priv->rx_mode = RX_MODE_UNI; + netif_addr_lock_bh(dev); + + if (dev->flags & IFF_PROMISC) { + dprintk("%s: promiscuous mode\n", dev->name); + priv->rx_mode = RX_MODE_PROMISC; + } else if ((dev->flags & IFF_ALLMULTI)) { + dprintk("%s: allmulti mode\n", dev->name); + priv->rx_mode = RX_MODE_ALL_MULTI; + } else if (!netdev_mc_empty(dev)) { + struct netdev_hw_addr *ha; + + dprintk("%s: set_mc_list, %d entries\n", + dev->name, netdev_mc_count(dev)); + + priv->rx_mode = RX_MODE_MULTI; + priv->multi_num = 0; + + netdev_for_each_mc_addr(ha, dev) + dvb_set_mc_filter(dev, ha->addr); + } + + netif_addr_unlock_bh(dev); + dvb_net_feed_start(dev); +} + + +static void dvb_net_set_multicast_list (struct net_device *dev) +{ + struct dvb_net_priv *priv = netdev_priv(dev); + schedule_work(&priv->set_multicast_list_wq); +} + + +static void wq_restart_net_feed (struct work_struct *work) +{ + struct dvb_net_priv *priv = + container_of(work, struct dvb_net_priv, restart_net_feed_wq); + struct net_device *dev = priv->net; + + if (netif_running(dev)) { + dvb_net_feed_stop(dev); + dvb_net_feed_start(dev); + } +} + + +static int dvb_net_set_mac (struct net_device *dev, void *p) +{ + struct dvb_net_priv *priv = netdev_priv(dev); + struct sockaddr *addr=p; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + + if (netif_running(dev)) + schedule_work(&priv->restart_net_feed_wq); + + return 0; +} + + +static int dvb_net_open(struct net_device *dev) +{ + struct dvb_net_priv *priv = netdev_priv(dev); + + priv->in_use++; + dvb_net_feed_start(dev); + return 0; +} + + +static int dvb_net_stop(struct net_device *dev) +{ + struct dvb_net_priv *priv = netdev_priv(dev); + + priv->in_use--; + return dvb_net_feed_stop(dev); +} + +static const struct header_ops dvb_header_ops = { + .create = eth_header, + .parse = eth_header_parse, + .rebuild = eth_rebuild_header, +}; + + +static const struct net_device_ops dvb_netdev_ops = { + .ndo_open = dvb_net_open, + .ndo_stop = dvb_net_stop, + .ndo_start_xmit = dvb_net_tx, + .ndo_set_rx_mode = dvb_net_set_multicast_list, + .ndo_set_mac_address = dvb_net_set_mac, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +static void dvb_net_setup(struct net_device *dev) +{ + ether_setup(dev); + + dev->header_ops = &dvb_header_ops; + dev->netdev_ops = &dvb_netdev_ops; + dev->mtu = 4096; + + dev->flags |= IFF_NOARP; +} + +static int get_if(struct dvb_net *dvbnet) +{ + int i; + + for (i=0; istate[i]) + break; + + if (i == DVB_NET_DEVICES_MAX) + return -1; + + dvbnet->state[i]=1; + return i; +} + +static int dvb_net_add_if(struct dvb_net *dvbnet, u16 pid, u8 feedtype) +{ + struct net_device *net; + struct dvb_net_priv *priv; + int result; + int if_num; + + if (feedtype != DVB_NET_FEEDTYPE_MPE && feedtype != DVB_NET_FEEDTYPE_ULE) + return -EINVAL; + if ((if_num = get_if(dvbnet)) < 0) + return -EINVAL; + + net = alloc_netdev(sizeof(struct dvb_net_priv), "dvb", dvb_net_setup); + if (!net) + return -ENOMEM; + + if (dvbnet->dvbdev->id) + snprintf(net->name, IFNAMSIZ, "dvb%d%u%d", + dvbnet->dvbdev->adapter->num, dvbnet->dvbdev->id, if_num); + else + /* compatibility fix to keep dvb0_0 format */ + snprintf(net->name, IFNAMSIZ, "dvb%d_%d", + dvbnet->dvbdev->adapter->num, if_num); + + net->addr_len = 6; + memcpy(net->dev_addr, dvbnet->dvbdev->adapter->proposed_mac, 6); + + dvbnet->device[if_num] = net; + + priv = netdev_priv(net); + priv->net = net; + priv->demux = dvbnet->demux; + priv->pid = pid; + priv->rx_mode = RX_MODE_UNI; + priv->need_pusi = 1; + priv->tscc = 0; + priv->feedtype = feedtype; + reset_ule(priv); + + INIT_WORK(&priv->set_multicast_list_wq, wq_set_multicast_list); + INIT_WORK(&priv->restart_net_feed_wq, wq_restart_net_feed); + mutex_init(&priv->mutex); + + net->base_addr = pid; + + if ((result = register_netdev(net)) < 0) { + dvbnet->device[if_num] = NULL; + free_netdev(net); + return result; + } + printk("dvb_net: created network interface %s\n", net->name); + + return if_num; +} + +static int dvb_net_remove_if(struct dvb_net *dvbnet, unsigned long num) +{ + struct net_device *net = dvbnet->device[num]; + struct dvb_net_priv *priv; + + if (!dvbnet->state[num]) + return -EINVAL; + priv = netdev_priv(net); + if (priv->in_use) + return -EBUSY; + + dvb_net_stop(net); + flush_work(&priv->set_multicast_list_wq); + flush_work(&priv->restart_net_feed_wq); + printk("dvb_net: removed network interface %s\n", net->name); + unregister_netdev(net); + dvbnet->state[num]=0; + dvbnet->device[num] = NULL; + free_netdev(net); + + return 0; +} + +static int dvb_net_do_ioctl(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_net *dvbnet = dvbdev->priv; + int ret = 0; + + if (((file->f_flags&O_ACCMODE)==O_RDONLY)) + return -EPERM; + + if (mutex_lock_interruptible(&dvbnet->ioctl_mutex)) + return -ERESTARTSYS; + + switch (cmd) { + case NET_ADD_IF: + { + struct dvb_net_if *dvbnetif = parg; + int result; + + if (!capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto ioctl_error; + } + + if (!try_module_get(dvbdev->adapter->module)) { + ret = -EPERM; + goto ioctl_error; + } + + result=dvb_net_add_if(dvbnet, dvbnetif->pid, dvbnetif->feedtype); + if (result<0) { + module_put(dvbdev->adapter->module); + ret = result; + goto ioctl_error; + } + dvbnetif->if_num=result; + break; + } + case NET_GET_IF: + { + struct net_device *netdev; + struct dvb_net_priv *priv_data; + struct dvb_net_if *dvbnetif = parg; + + if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX || + !dvbnet->state[dvbnetif->if_num]) { + ret = -EINVAL; + goto ioctl_error; + } + + netdev = dvbnet->device[dvbnetif->if_num]; + + priv_data = netdev_priv(netdev); + dvbnetif->pid=priv_data->pid; + dvbnetif->feedtype=priv_data->feedtype; + break; + } + case NET_REMOVE_IF: + { + if (!capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto ioctl_error; + } + if ((unsigned long) parg >= DVB_NET_DEVICES_MAX) { + ret = -EINVAL; + goto ioctl_error; + } + ret = dvb_net_remove_if(dvbnet, (unsigned long) parg); + if (!ret) + module_put(dvbdev->adapter->module); + break; + } + + /* binary compatibility cruft */ + case __NET_ADD_IF_OLD: + { + struct __dvb_net_if_old *dvbnetif = parg; + int result; + + if (!capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto ioctl_error; + } + + if (!try_module_get(dvbdev->adapter->module)) { + ret = -EPERM; + goto ioctl_error; + } + + result=dvb_net_add_if(dvbnet, dvbnetif->pid, DVB_NET_FEEDTYPE_MPE); + if (result<0) { + module_put(dvbdev->adapter->module); + ret = result; + goto ioctl_error; + } + dvbnetif->if_num=result; + break; + } + case __NET_GET_IF_OLD: + { + struct net_device *netdev; + struct dvb_net_priv *priv_data; + struct __dvb_net_if_old *dvbnetif = parg; + + if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX || + !dvbnet->state[dvbnetif->if_num]) { + ret = -EINVAL; + goto ioctl_error; + } + + netdev = dvbnet->device[dvbnetif->if_num]; + + priv_data = netdev_priv(netdev); + dvbnetif->pid=priv_data->pid; + break; + } + default: + ret = -ENOTTY; + break; + } + +ioctl_error: + mutex_unlock(&dvbnet->ioctl_mutex); + return ret; +} + +static long dvb_net_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + return dvb_usercopy(file, cmd, arg, dvb_net_do_ioctl); +} + +static int dvb_net_close(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_net *dvbnet = dvbdev->priv; + + dvb_generic_release(inode, file); + + if(dvbdev->users == 1 && dvbnet->exit == 1) + wake_up(&dvbdev->wait_queue); + return 0; +} + + +static const struct file_operations dvb_net_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = dvb_net_ioctl, + .open = dvb_generic_open, + .release = dvb_net_close, + .llseek = noop_llseek, +}; + +static struct dvb_device dvbdev_net = { + .priv = NULL, + .users = 1, + .writers = 1, + .fops = &dvb_net_fops, +}; + + +void dvb_net_release (struct dvb_net *dvbnet) +{ + int i; + + dvbnet->exit = 1; + if (dvbnet->dvbdev->users < 1) + wait_event(dvbnet->dvbdev->wait_queue, + dvbnet->dvbdev->users==1); + + dvb_unregister_device(dvbnet->dvbdev); + + for (i=0; istate[i]) + continue; + dvb_net_remove_if(dvbnet, i); + } +} +EXPORT_SYMBOL(dvb_net_release); + + +int dvb_net_init (struct dvb_adapter *adap, struct dvb_net *dvbnet, + struct dmx_demux *dmx) +{ + int i; + + mutex_init(&dvbnet->ioctl_mutex); + dvbnet->demux = dmx; + + for (i=0; istate[i] = 0; + + return dvb_register_device(adap, &dvbnet->dvbdev, &dvbdev_net, + dvbnet, DVB_DEVICE_NET); +} +EXPORT_SYMBOL(dvb_net_init); diff --git a/drivers/media/dvb-core/dvb_net.h b/drivers/media/dvb-core/dvb_net.h new file mode 100644 index 00000000..ede78e8c --- /dev/null +++ b/drivers/media/dvb-core/dvb_net.h @@ -0,0 +1,67 @@ +/* + * dvb_net.h + * + * Copyright (C) 2001 Ralph Metzler for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVB_NET_H_ +#define _DVB_NET_H_ + +#include +#include +#include +#include +#include + +#include "dvbdev.h" + +#define DVB_NET_DEVICES_MAX 10 + +#ifdef CONFIG_DVB_NET + +struct dvb_net { + struct dvb_device *dvbdev; + struct net_device *device[DVB_NET_DEVICES_MAX]; + int state[DVB_NET_DEVICES_MAX]; + unsigned int exit:1; + struct dmx_demux *demux; + struct mutex ioctl_mutex; +}; + +void dvb_net_release(struct dvb_net *); +int dvb_net_init(struct dvb_adapter *, struct dvb_net *, struct dmx_demux *); + +#else + +struct dvb_net { + struct dvb_device *dvbdev; +}; + +static inline void dvb_net_release(struct dvb_net *dvbnet) +{ +} + +static inline int dvb_net_init(struct dvb_adapter *adap, + struct dvb_net *dvbnet, struct dmx_demux *dmx) +{ + return 0; +} + +#endif /* ifdef CONFIG_DVB_NET */ + +#endif diff --git a/drivers/media/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb-core/dvb_ringbuffer.c new file mode 100644 index 00000000..a5712cd7 --- /dev/null +++ b/drivers/media/dvb-core/dvb_ringbuffer.c @@ -0,0 +1,299 @@ +/* + * + * dvb_ringbuffer.c: ring buffer implementation for the dvb driver + * + * Copyright (C) 2003 Oliver Endriss + * Copyright (C) 2004 Andrew de Quincey + * + * based on code originally found in av7110.c & dvb_ci.c: + * Copyright (C) 1999-2003 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + + + +#include +#include +#include +#include +#include +#include + +#include "dvb_ringbuffer.h" + +#define PKT_READY 0 +#define PKT_DISPOSED 1 + + +void dvb_ringbuffer_init(struct dvb_ringbuffer *rbuf, void *data, size_t len) +{ + rbuf->pread=rbuf->pwrite=0; + rbuf->data=data; + rbuf->size=len; + rbuf->error=0; + + init_waitqueue_head(&rbuf->queue); + + spin_lock_init(&(rbuf->lock)); +} + + + +int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf) +{ + return (rbuf->pread==rbuf->pwrite); +} + + + +ssize_t dvb_ringbuffer_free(struct dvb_ringbuffer *rbuf) +{ + ssize_t free; + + free = rbuf->pread - rbuf->pwrite; + if (free <= 0) + free += rbuf->size; + return free-1; +} + + + +ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf) +{ + ssize_t avail; + + avail = rbuf->pwrite - rbuf->pread; + if (avail < 0) + avail += rbuf->size; + return avail; +} + + + +void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf) +{ + rbuf->pread = rbuf->pwrite; + rbuf->error = 0; +} +EXPORT_SYMBOL(dvb_ringbuffer_flush); + +void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf) +{ + rbuf->pread = rbuf->pwrite = 0; + rbuf->error = 0; +} + +void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf) +{ + unsigned long flags; + + spin_lock_irqsave(&rbuf->lock, flags); + dvb_ringbuffer_flush(rbuf); + spin_unlock_irqrestore(&rbuf->lock, flags); + + wake_up(&rbuf->queue); +} + +ssize_t dvb_ringbuffer_read_user(struct dvb_ringbuffer *rbuf, u8 __user *buf, size_t len) +{ + size_t todo = len; + size_t split; + + split = (rbuf->pread + len > rbuf->size) ? rbuf->size - rbuf->pread : 0; + if (split > 0) { + if (copy_to_user(buf, rbuf->data+rbuf->pread, split)) + return -EFAULT; + buf += split; + todo -= split; + rbuf->pread = 0; + } + if (copy_to_user(buf, rbuf->data+rbuf->pread, todo)) + return -EFAULT; + + rbuf->pread = (rbuf->pread + todo) % rbuf->size; + + return len; +} + +void dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, u8 *buf, size_t len) +{ + size_t todo = len; + size_t split; + + split = (rbuf->pread + len > rbuf->size) ? rbuf->size - rbuf->pread : 0; + if (split > 0) { + memcpy(buf, rbuf->data+rbuf->pread, split); + buf += split; + todo -= split; + rbuf->pread = 0; + } + memcpy(buf, rbuf->data+rbuf->pread, todo); + + rbuf->pread = (rbuf->pread + todo) % rbuf->size; +} + + +ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf, size_t len) +{ + size_t todo = len; + size_t split; + + split = (rbuf->pwrite + len > rbuf->size) ? rbuf->size - rbuf->pwrite : 0; + + if (split > 0) { + memcpy(rbuf->data+rbuf->pwrite, buf, split); + buf += split; + todo -= split; + rbuf->pwrite = 0; + } + memcpy(rbuf->data+rbuf->pwrite, buf, todo); + rbuf->pwrite = (rbuf->pwrite + todo) % rbuf->size; + + return len; +} + +ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8* buf, size_t len) +{ + int status; + ssize_t oldpwrite = rbuf->pwrite; + + DVB_RINGBUFFER_WRITE_BYTE(rbuf, len >> 8); + DVB_RINGBUFFER_WRITE_BYTE(rbuf, len & 0xff); + DVB_RINGBUFFER_WRITE_BYTE(rbuf, PKT_READY); + status = dvb_ringbuffer_write(rbuf, buf, len); + + if (status < 0) rbuf->pwrite = oldpwrite; + return status; +} + +ssize_t dvb_ringbuffer_pkt_read_user(struct dvb_ringbuffer *rbuf, size_t idx, + int offset, u8 __user *buf, size_t len) +{ + size_t todo; + size_t split; + size_t pktlen; + + pktlen = rbuf->data[idx] << 8; + pktlen |= rbuf->data[(idx + 1) % rbuf->size]; + if (offset > pktlen) return -EINVAL; + if ((offset + len) > pktlen) len = pktlen - offset; + + idx = (idx + DVB_RINGBUFFER_PKTHDRSIZE + offset) % rbuf->size; + todo = len; + split = ((idx + len) > rbuf->size) ? rbuf->size - idx : 0; + if (split > 0) { + if (copy_to_user(buf, rbuf->data+idx, split)) + return -EFAULT; + buf += split; + todo -= split; + idx = 0; + } + if (copy_to_user(buf, rbuf->data+idx, todo)) + return -EFAULT; + + return len; +} + +ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx, + int offset, u8* buf, size_t len) +{ + size_t todo; + size_t split; + size_t pktlen; + + pktlen = rbuf->data[idx] << 8; + pktlen |= rbuf->data[(idx + 1) % rbuf->size]; + if (offset > pktlen) return -EINVAL; + if ((offset + len) > pktlen) len = pktlen - offset; + + idx = (idx + DVB_RINGBUFFER_PKTHDRSIZE + offset) % rbuf->size; + todo = len; + split = ((idx + len) > rbuf->size) ? rbuf->size - idx : 0; + if (split > 0) { + memcpy(buf, rbuf->data+idx, split); + buf += split; + todo -= split; + idx = 0; + } + memcpy(buf, rbuf->data+idx, todo); + return len; +} + +void dvb_ringbuffer_pkt_dispose(struct dvb_ringbuffer *rbuf, size_t idx) +{ + size_t pktlen; + + rbuf->data[(idx + 2) % rbuf->size] = PKT_DISPOSED; + + // clean up disposed packets + while(dvb_ringbuffer_avail(rbuf) > DVB_RINGBUFFER_PKTHDRSIZE) { + if (DVB_RINGBUFFER_PEEK(rbuf, 2) == PKT_DISPOSED) { + pktlen = DVB_RINGBUFFER_PEEK(rbuf, 0) << 8; + pktlen |= DVB_RINGBUFFER_PEEK(rbuf, 1); + DVB_RINGBUFFER_SKIP(rbuf, pktlen + DVB_RINGBUFFER_PKTHDRSIZE); + } else { + // first packet is not disposed, so we stop cleaning now + break; + } + } +} + +ssize_t dvb_ringbuffer_pkt_next(struct dvb_ringbuffer *rbuf, size_t idx, size_t* pktlen) +{ + int consumed; + int curpktlen; + int curpktstatus; + + if (idx == -1) { + idx = rbuf->pread; + } else { + curpktlen = rbuf->data[idx] << 8; + curpktlen |= rbuf->data[(idx + 1) % rbuf->size]; + idx = (idx + curpktlen + DVB_RINGBUFFER_PKTHDRSIZE) % rbuf->size; + } + + consumed = (idx - rbuf->pread) % rbuf->size; + + while((dvb_ringbuffer_avail(rbuf) - consumed) > DVB_RINGBUFFER_PKTHDRSIZE) { + + curpktlen = rbuf->data[idx] << 8; + curpktlen |= rbuf->data[(idx + 1) % rbuf->size]; + curpktstatus = rbuf->data[(idx + 2) % rbuf->size]; + + if (curpktstatus == PKT_READY) { + *pktlen = curpktlen; + return idx; + } + + consumed += curpktlen + DVB_RINGBUFFER_PKTHDRSIZE; + idx = (idx + curpktlen + DVB_RINGBUFFER_PKTHDRSIZE) % rbuf->size; + } + + // no packets available + return -1; +} + + + +EXPORT_SYMBOL(dvb_ringbuffer_init); +EXPORT_SYMBOL(dvb_ringbuffer_empty); +EXPORT_SYMBOL(dvb_ringbuffer_free); +EXPORT_SYMBOL(dvb_ringbuffer_avail); +EXPORT_SYMBOL(dvb_ringbuffer_flush_spinlock_wakeup); +EXPORT_SYMBOL(dvb_ringbuffer_read_user); +EXPORT_SYMBOL(dvb_ringbuffer_read); +EXPORT_SYMBOL(dvb_ringbuffer_write); diff --git a/drivers/media/dvb-core/dvb_ringbuffer.h b/drivers/media/dvb-core/dvb_ringbuffer.h new file mode 100644 index 00000000..41f04dae --- /dev/null +++ b/drivers/media/dvb-core/dvb_ringbuffer.h @@ -0,0 +1,186 @@ +/* + * + * dvb_ringbuffer.h: ring buffer implementation for the dvb driver + * + * Copyright (C) 2003 Oliver Endriss + * Copyright (C) 2004 Andrew de Quincey + * + * based on code originally found in av7110.c & dvb_ci.c: + * Copyright (C) 1999-2003 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DVB_RINGBUFFER_H_ +#define _DVB_RINGBUFFER_H_ + +#include +#include + +struct dvb_ringbuffer { + u8 *data; + ssize_t size; + ssize_t pread; + ssize_t pwrite; + int error; + + wait_queue_head_t queue; + spinlock_t lock; +}; + +#define DVB_RINGBUFFER_PKTHDRSIZE 3 + + +/* +** Notes: +** ------ +** (1) For performance reasons read and write routines don't check buffer sizes +** and/or number of bytes free/available. This has to be done before these +** routines are called. For example: +** +** *** write bytes *** +** free = dvb_ringbuffer_free(rbuf); +** if (free >= buflen) +** count = dvb_ringbuffer_write(rbuf, buffer, buflen); +** else +** ... +** +** *** read min. 1000, max. bytes *** +** avail = dvb_ringbuffer_avail(rbuf); +** if (avail >= 1000) +** count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize)); +** else +** ... +** +** (2) If there is exactly one reader and one writer, there is no need +** to lock read or write operations. +** Two or more readers must be locked against each other. +** Flushing the buffer counts as a read operation. +** Resetting the buffer counts as a read and write operation. +** Two or more writers must be locked against each other. +*/ + +/* initialize ring buffer, lock and queue */ +extern void dvb_ringbuffer_init(struct dvb_ringbuffer *rbuf, void *data, size_t len); + +/* test whether buffer is empty */ +extern int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf); + +/* return the number of free bytes in the buffer */ +extern ssize_t dvb_ringbuffer_free(struct dvb_ringbuffer *rbuf); + +/* return the number of bytes waiting in the buffer */ +extern ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf); + + +/* +** Reset the read and write pointers to zero and flush the buffer +** This counts as a read and write operation +*/ +extern void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf); + + +/* read routines & macros */ +/* ---------------------- */ +/* flush buffer */ +extern void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf); + +/* flush buffer protected by spinlock and wake-up waiting task(s) */ +extern void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf); + +/* peek at byte in the buffer */ +#define DVB_RINGBUFFER_PEEK(rbuf,offs) \ + (rbuf)->data[((rbuf)->pread+(offs))%(rbuf)->size] + +/* advance read ptr by bytes */ +#define DVB_RINGBUFFER_SKIP(rbuf,num) \ + (rbuf)->pread=((rbuf)->pread+(num))%(rbuf)->size + +/* +** read bytes from ring buffer into +** specifies whether resides in user space +** returns number of bytes transferred or -EFAULT +*/ +extern ssize_t dvb_ringbuffer_read_user(struct dvb_ringbuffer *rbuf, + u8 __user *buf, size_t len); +extern void dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, + u8 *buf, size_t len); + + +/* write routines & macros */ +/* ----------------------- */ +/* write single byte to ring buffer */ +#define DVB_RINGBUFFER_WRITE_BYTE(rbuf,byte) \ + { (rbuf)->data[(rbuf)->pwrite]=(byte); \ + (rbuf)->pwrite=((rbuf)->pwrite+1)%(rbuf)->size; } +/* +** write bytes to ring buffer +** specifies whether resides in user space +** returns number of bytes transferred or -EFAULT +*/ +extern ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf, + size_t len); + + +/** + * Write a packet into the ringbuffer. + * + * Ringbuffer to write to. + * Buffer to write. + * Length of buffer (currently limited to 65535 bytes max). + * returns Number of bytes written, or -EFAULT, -ENOMEM, -EVINAL. + */ +extern ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8* buf, + size_t len); + +/** + * Read from a packet in the ringbuffer. Note: unlike dvb_ringbuffer_read(), this + * does NOT update the read pointer in the ringbuffer. You must use + * dvb_ringbuffer_pkt_dispose() to mark a packet as no longer required. + * + * Ringbuffer concerned. + * Packet index as returned by dvb_ringbuffer_pkt_next(). + * Offset into packet to read from. + * Destination buffer for data. + * Size of destination buffer. + * Set to 1 if is in userspace. + * returns Number of bytes read, or -EFAULT. + */ +extern ssize_t dvb_ringbuffer_pkt_read_user(struct dvb_ringbuffer *rbuf, size_t idx, + int offset, u8 __user *buf, size_t len); +extern ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx, + int offset, u8 *buf, size_t len); + +/** + * Dispose of a packet in the ring buffer. + * + * Ring buffer concerned. + * Packet index as returned by dvb_ringbuffer_pkt_next(). + */ +extern void dvb_ringbuffer_pkt_dispose(struct dvb_ringbuffer *rbuf, size_t idx); + +/** + * Get the index of the next packet in a ringbuffer. + * + * Ringbuffer concerned. + * Previous packet index, or -1 to return the first packet index. + * On success, will be updated to contain the length of the packet in bytes. + * returns Packet index (if >=0), or -1 if no packets available. + */ +extern ssize_t dvb_ringbuffer_pkt_next(struct dvb_ringbuffer *rbuf, size_t idx, size_t* pktlen); + + +#endif /* _DVB_RINGBUFFER_H_ */ diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c new file mode 100644 index 00000000..401ef64f --- /dev/null +++ b/drivers/media/dvb-core/dvbdev.c @@ -0,0 +1,505 @@ +/* + * dvbdev.c + * + * Copyright (C) 2000 Ralph Metzler + * & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "dvbdev.h" + +static DEFINE_MUTEX(dvbdev_mutex); +static int dvbdev_debug; + +module_param(dvbdev_debug, int, 0644); +MODULE_PARM_DESC(dvbdev_debug, "Turn on/off device debugging (default:off)."); + +#define dprintk if (dvbdev_debug) printk + +static LIST_HEAD(dvb_adapter_list); +static DEFINE_MUTEX(dvbdev_register_lock); + +static const char * const dnames[] = { + "video", "audio", "sec", "frontend", "demux", "dvr", "ca", + "net", "osd" +}; + +#ifdef CONFIG_DVB_DYNAMIC_MINORS +#define MAX_DVB_MINORS 256 +#define DVB_MAX_IDS MAX_DVB_MINORS +#else +#define DVB_MAX_IDS 4 +#define nums2minor(num,type,id) ((num << 6) | (id << 4) | type) +#define MAX_DVB_MINORS (DVB_MAX_ADAPTERS*64) +#endif + +static struct class *dvb_class; + +static struct dvb_device *dvb_minors[MAX_DVB_MINORS]; +static DECLARE_RWSEM(minor_rwsem); + +static int dvb_device_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev; + + mutex_lock(&dvbdev_mutex); + down_read(&minor_rwsem); + dvbdev = dvb_minors[iminor(inode)]; + + if (dvbdev && dvbdev->fops) { + int err = 0; + const struct file_operations *old_fops; + + file->private_data = dvbdev; + old_fops = file->f_op; + file->f_op = fops_get(dvbdev->fops); + if (file->f_op == NULL) { + file->f_op = old_fops; + goto fail; + } + if(file->f_op->open) + err = file->f_op->open(inode,file); + if (err) { + fops_put(file->f_op); + file->f_op = fops_get(old_fops); + } + fops_put(old_fops); + up_read(&minor_rwsem); + mutex_unlock(&dvbdev_mutex); + return err; + } +fail: + up_read(&minor_rwsem); + mutex_unlock(&dvbdev_mutex); + return -ENODEV; +} + + +static const struct file_operations dvb_device_fops = +{ + .owner = THIS_MODULE, + .open = dvb_device_open, + .llseek = noop_llseek, +}; + +static struct cdev dvb_device_cdev; + +int dvb_generic_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + + if (!dvbdev) + return -ENODEV; + + if (!dvbdev->users) + return -EBUSY; + + if ((file->f_flags & O_ACCMODE) == O_RDONLY) { + if (!dvbdev->readers) + return -EBUSY; + dvbdev->readers--; + } else { + if (!dvbdev->writers) + return -EBUSY; + dvbdev->writers--; + } + + dvbdev->users--; + return 0; +} +EXPORT_SYMBOL(dvb_generic_open); + + +int dvb_generic_release(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + + if (!dvbdev) + return -ENODEV; + + if ((file->f_flags & O_ACCMODE) == O_RDONLY) { + dvbdev->readers++; + } else { + dvbdev->writers++; + } + + dvbdev->users++; + return 0; +} +EXPORT_SYMBOL(dvb_generic_release); + + +long dvb_generic_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct dvb_device *dvbdev = file->private_data; + + if (!dvbdev) + return -ENODEV; + + if (!dvbdev->kernel_ioctl) + return -EINVAL; + + return dvb_usercopy(file, cmd, arg, dvbdev->kernel_ioctl); +} +EXPORT_SYMBOL(dvb_generic_ioctl); + + +static int dvbdev_get_free_id (struct dvb_adapter *adap, int type) +{ + u32 id = 0; + + while (id < DVB_MAX_IDS) { + struct dvb_device *dev; + list_for_each_entry(dev, &adap->device_list, list_head) + if (dev->type == type && dev->id == id) + goto skip; + return id; +skip: + id++; + } + return -ENFILE; +} + + +int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, + const struct dvb_device *template, void *priv, int type) +{ + struct dvb_device *dvbdev; + struct file_operations *dvbdevfops; + struct device *clsdev; + int minor; + int id; + + mutex_lock(&dvbdev_register_lock); + + if ((id = dvbdev_get_free_id (adap, type)) < 0){ + mutex_unlock(&dvbdev_register_lock); + *pdvbdev = NULL; + printk(KERN_ERR "%s: couldn't find free device id\n", __func__); + return -ENFILE; + } + + *pdvbdev = dvbdev = kmalloc(sizeof(struct dvb_device), GFP_KERNEL); + + if (!dvbdev){ + mutex_unlock(&dvbdev_register_lock); + return -ENOMEM; + } + + dvbdevfops = kzalloc(sizeof(struct file_operations), GFP_KERNEL); + + if (!dvbdevfops){ + kfree (dvbdev); + mutex_unlock(&dvbdev_register_lock); + return -ENOMEM; + } + + memcpy(dvbdev, template, sizeof(struct dvb_device)); + dvbdev->type = type; + dvbdev->id = id; + dvbdev->adapter = adap; + dvbdev->priv = priv; + dvbdev->fops = dvbdevfops; + init_waitqueue_head (&dvbdev->wait_queue); + + memcpy(dvbdevfops, template->fops, sizeof(struct file_operations)); + dvbdevfops->owner = adap->module; + + list_add_tail (&dvbdev->list_head, &adap->device_list); + + down_write(&minor_rwsem); +#ifdef CONFIG_DVB_DYNAMIC_MINORS + for (minor = 0; minor < MAX_DVB_MINORS; minor++) + if (dvb_minors[minor] == NULL) + break; + + if (minor == MAX_DVB_MINORS) { + kfree(dvbdevfops); + kfree(dvbdev); + up_write(&minor_rwsem); + mutex_unlock(&dvbdev_register_lock); + return -EINVAL; + } +#else + minor = nums2minor(adap->num, type, id); +#endif + + dvbdev->minor = minor; + dvb_minors[minor] = dvbdev; + up_write(&minor_rwsem); + + mutex_unlock(&dvbdev_register_lock); + + clsdev = device_create(dvb_class, adap->device, + MKDEV(DVB_MAJOR, minor), + dvbdev, "dvb%d.%s%d", adap->num, dnames[type], id); + if (IS_ERR(clsdev)) { + printk(KERN_ERR "%s: failed to create device dvb%d.%s%d (%ld)\n", + __func__, adap->num, dnames[type], id, PTR_ERR(clsdev)); + return PTR_ERR(clsdev); + } + + dprintk(KERN_DEBUG "DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n", + adap->num, dnames[type], id, minor, minor); + + return 0; +} +EXPORT_SYMBOL(dvb_register_device); + + +void dvb_unregister_device(struct dvb_device *dvbdev) +{ + if (!dvbdev) + return; + + down_write(&minor_rwsem); + dvb_minors[dvbdev->minor] = NULL; + up_write(&minor_rwsem); + + device_destroy(dvb_class, MKDEV(DVB_MAJOR, dvbdev->minor)); + + list_del (&dvbdev->list_head); + kfree (dvbdev->fops); + kfree (dvbdev); +} +EXPORT_SYMBOL(dvb_unregister_device); + +static int dvbdev_check_free_adapter_num(int num) +{ + struct list_head *entry; + list_for_each(entry, &dvb_adapter_list) { + struct dvb_adapter *adap; + adap = list_entry(entry, struct dvb_adapter, list_head); + if (adap->num == num) + return 0; + } + return 1; +} + +static int dvbdev_get_free_adapter_num (void) +{ + int num = 0; + + while (num < DVB_MAX_ADAPTERS) { + if (dvbdev_check_free_adapter_num(num)) + return num; + num++; + } + + return -ENFILE; +} + + +int dvb_register_adapter(struct dvb_adapter *adap, const char *name, + struct module *module, struct device *device, + short *adapter_nums) +{ + int i, num; + + mutex_lock(&dvbdev_register_lock); + + for (i = 0; i < DVB_MAX_ADAPTERS; ++i) { + num = adapter_nums[i]; + if (num >= 0 && num < DVB_MAX_ADAPTERS) { + /* use the one the driver asked for */ + if (dvbdev_check_free_adapter_num(num)) + break; + } else { + num = dvbdev_get_free_adapter_num(); + break; + } + num = -1; + } + + if (num < 0) { + mutex_unlock(&dvbdev_register_lock); + return -ENFILE; + } + + memset (adap, 0, sizeof(struct dvb_adapter)); + INIT_LIST_HEAD (&adap->device_list); + + printk(KERN_INFO "DVB: registering new adapter (%s)\n", name); + + adap->num = num; + adap->name = name; + adap->module = module; + adap->device = device; + adap->mfe_shared = 0; + adap->mfe_dvbdev = NULL; + mutex_init (&adap->mfe_lock); + + list_add_tail (&adap->list_head, &dvb_adapter_list); + + mutex_unlock(&dvbdev_register_lock); + + return num; +} +EXPORT_SYMBOL(dvb_register_adapter); + + +int dvb_unregister_adapter(struct dvb_adapter *adap) +{ + mutex_lock(&dvbdev_register_lock); + list_del (&adap->list_head); + mutex_unlock(&dvbdev_register_lock); + return 0; +} +EXPORT_SYMBOL(dvb_unregister_adapter); + +/* if the miracle happens and "generic_usercopy()" is included into + the kernel, then this can vanish. please don't make the mistake and + define this as video_usercopy(). this will introduce a dependecy + to the v4l "videodev.o" module, which is unnecessary for some + cards (ie. the budget dvb-cards don't need the v4l module...) */ +int dvb_usercopy(struct file *file, + unsigned int cmd, unsigned long arg, + int (*func)(struct file *file, + unsigned int cmd, void *arg)) +{ + char sbuf[128]; + void *mbuf = NULL; + void *parg = NULL; + int err = -EINVAL; + + /* Copy arguments into temp kernel buffer */ + switch (_IOC_DIR(cmd)) { + case _IOC_NONE: + /* + * For this command, the pointer is actually an integer + * argument. + */ + parg = (void *) arg; + break; + case _IOC_READ: /* some v4l ioctls are marked wrong ... */ + case _IOC_WRITE: + case (_IOC_WRITE | _IOC_READ): + if (_IOC_SIZE(cmd) <= sizeof(sbuf)) { + parg = sbuf; + } else { + /* too big to allocate from stack */ + mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL); + if (NULL == mbuf) + return -ENOMEM; + parg = mbuf; + } + + err = -EFAULT; + if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd))) + goto out; + break; + } + + /* call driver */ + if ((err = func(file, cmd, parg)) == -ENOIOCTLCMD) + err = -ENOTTY; + + if (err < 0) + goto out; + + /* Copy results into user buffer */ + switch (_IOC_DIR(cmd)) + { + case _IOC_READ: + case (_IOC_WRITE | _IOC_READ): + if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd))) + err = -EFAULT; + break; + } + +out: + kfree(mbuf); + return err; +} + +static int dvb_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct dvb_device *dvbdev = dev_get_drvdata(dev); + + add_uevent_var(env, "DVB_ADAPTER_NUM=%d", dvbdev->adapter->num); + add_uevent_var(env, "DVB_DEVICE_TYPE=%s", dnames[dvbdev->type]); + add_uevent_var(env, "DVB_DEVICE_NUM=%d", dvbdev->id); + return 0; +} + +static char *dvb_devnode(struct device *dev, umode_t *mode) +{ + struct dvb_device *dvbdev = dev_get_drvdata(dev); + + return kasprintf(GFP_KERNEL, "dvb/adapter%d/%s%d", + dvbdev->adapter->num, dnames[dvbdev->type], dvbdev->id); +} + + +static int __init init_dvbdev(void) +{ + int retval; + dev_t dev = MKDEV(DVB_MAJOR, 0); + + if ((retval = register_chrdev_region(dev, MAX_DVB_MINORS, "DVB")) != 0) { + printk(KERN_ERR "dvb-core: unable to get major %d\n", DVB_MAJOR); + return retval; + } + + cdev_init(&dvb_device_cdev, &dvb_device_fops); + if ((retval = cdev_add(&dvb_device_cdev, dev, MAX_DVB_MINORS)) != 0) { + printk(KERN_ERR "dvb-core: unable register character device\n"); + goto error; + } + + dvb_class = class_create(THIS_MODULE, "dvb"); + if (IS_ERR(dvb_class)) { + retval = PTR_ERR(dvb_class); + goto error; + } + dvb_class->dev_uevent = dvb_uevent; + dvb_class->devnode = dvb_devnode; + return 0; + +error: + cdev_del(&dvb_device_cdev); + unregister_chrdev_region(dev, MAX_DVB_MINORS); + return retval; +} + + +static void __exit exit_dvbdev(void) +{ + class_destroy(dvb_class); + cdev_del(&dvb_device_cdev); + unregister_chrdev_region(MKDEV(DVB_MAJOR, 0), MAX_DVB_MINORS); +} + +subsys_initcall(init_dvbdev); +module_exit(exit_dvbdev); + +MODULE_DESCRIPTION("DVB Core Driver"); +MODULE_AUTHOR("Marcus Metzler, Ralph Metzler, Holger Waechtler"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-core/dvbdev.h b/drivers/media/dvb-core/dvbdev.h new file mode 100644 index 00000000..93a9470d --- /dev/null +++ b/drivers/media/dvb-core/dvbdev.h @@ -0,0 +1,146 @@ +/* + * dvbdev.h + * + * Copyright (C) 2000 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Lesser Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVBDEV_H_ +#define _DVBDEV_H_ + +#include +#include +#include +#include + +#define DVB_MAJOR 212 + +#if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0 + #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS +#else + #define DVB_MAX_ADAPTERS 8 +#endif + +#define DVB_UNSET (-1) + +#define DVB_DEVICE_VIDEO 0 +#define DVB_DEVICE_AUDIO 1 +#define DVB_DEVICE_SEC 2 +#define DVB_DEVICE_FRONTEND 3 +#define DVB_DEVICE_DEMUX 4 +#define DVB_DEVICE_DVR 5 +#define DVB_DEVICE_CA 6 +#define DVB_DEVICE_NET 7 +#define DVB_DEVICE_OSD 8 + +#define DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr) \ + static short adapter_nr[] = \ + {[0 ... (DVB_MAX_ADAPTERS - 1)] = DVB_UNSET }; \ + module_param_array(adapter_nr, short, NULL, 0444); \ + MODULE_PARM_DESC(adapter_nr, "DVB adapter numbers") + +struct dvb_frontend; + +struct dvb_adapter { + int num; + struct list_head list_head; + struct list_head device_list; + const char *name; + u8 proposed_mac [6]; + void* priv; + + struct device *device; + + struct module *module; + + int mfe_shared; /* indicates mutually exclusive frontends */ + struct dvb_device *mfe_dvbdev; /* frontend device in use */ + struct mutex mfe_lock; /* access lock for thread creation */ +}; + + +struct dvb_device { + struct list_head list_head; + const struct file_operations *fops; + struct dvb_adapter *adapter; + int type; + int minor; + u32 id; + + /* in theory, 'users' can vanish now, + but I don't want to change too much now... */ + int readers; + int writers; + int users; + + wait_queue_head_t wait_queue; + /* don't really need those !? -- FIXME: use video_usercopy */ + int (*kernel_ioctl)(struct file *file, unsigned int cmd, void *arg); + + void *priv; +}; + + +extern int dvb_register_adapter(struct dvb_adapter *adap, const char *name, + struct module *module, struct device *device, + short *adapter_nums); +extern int dvb_unregister_adapter (struct dvb_adapter *adap); + +extern int dvb_register_device (struct dvb_adapter *adap, + struct dvb_device **pdvbdev, + const struct dvb_device *template, + void *priv, + int type); + +extern void dvb_unregister_device (struct dvb_device *dvbdev); + +extern int dvb_generic_open (struct inode *inode, struct file *file); +extern int dvb_generic_release (struct inode *inode, struct file *file); +extern long dvb_generic_ioctl (struct file *file, + unsigned int cmd, unsigned long arg); + +/* we don't mess with video_usercopy() any more, +we simply define out own dvb_usercopy(), which will hopefully become +generic_usercopy() someday... */ + +extern int dvb_usercopy(struct file *file, unsigned int cmd, unsigned long arg, + int (*func)(struct file *file, unsigned int cmd, void *arg)); + +/** generic DVB attach function. */ +#ifdef CONFIG_MEDIA_ATTACH +#define dvb_attach(FUNCTION, ARGS...) ({ \ + void *__r = NULL; \ + typeof(&FUNCTION) __a = symbol_request(FUNCTION); \ + if (__a) { \ + __r = (void *) __a(ARGS); \ + if (__r == NULL) \ + symbol_put(FUNCTION); \ + } else { \ + printk(KERN_ERR "DVB: Unable to find symbol "#FUNCTION"()\n"); \ + } \ + __r; \ +}) + +#else +#define dvb_attach(FUNCTION, ARGS...) ({ \ + FUNCTION(ARGS); \ +}) + +#endif + +#endif /* #ifndef _DVBDEV_H_ */ diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig new file mode 100644 index 00000000..0e2ec6f7 --- /dev/null +++ b/drivers/media/dvb-frontends/Kconfig @@ -0,0 +1,748 @@ +menu "Customise DVB Frontends" + visible if !MEDIA_SUBDRV_AUTOSELECT + +comment "Multistandard (satellite) frontends" + depends on DVB_CORE + +config DVB_STB0899 + tristate "STB0899 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2/DSS Multistandard demodulator. Say Y when you want + to support this demodulator based frontends + +config DVB_STB6100 + tristate "STB6100 based tuners" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A Silicon tuner from ST used in conjunction with the STB0899 + demodulator. Say Y when you want to support this tuner. + +config DVB_STV090x + tristate "STV0900/STV0903(A/B) based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators. + Say Y when you want to support these frontends. + +config DVB_STV6110x + tristate "STV6110/(A) based tuners" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A Silicon tuner that supports DVB-S and DVB-S2 modes + +comment "Multistandard (cable + terrestrial) frontends" + depends on DVB_CORE + +config DVB_DRXK + tristate "Micronas DRXK based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Micronas DRX-K DVB-C/T demodulator. + + Say Y when you want to support this frontend. + +config DVB_TDA18271C2DD + tristate "NXP TDA18271C2 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + NXP TDA18271 silicon tuner. + + Say Y when you want to support this tuner. + +comment "DVB-S (satellite) frontends" + depends on DVB_CORE + +config DVB_CX24110 + tristate "Conexant CX24110 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_CX24123 + tristate "Conexant CX24123 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_MT312 + tristate "Zarlink VP310/MT312/ZL10313 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_ZL10036 + tristate "Zarlink ZL10036 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_ZL10039 + tristate "Zarlink ZL10039 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_S5H1420 + tristate "Samsung S5H1420 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STV0288 + tristate "ST STV0288 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STB6000 + tristate "ST STB6000 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + +config DVB_STV0299 + tristate "ST STV0299 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STV6110 + tristate "ST STV6110 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + +config DVB_STV0900 + tristate "ST STV0900 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 demodulator. Say Y when you want to support this frontend. + +config DVB_TDA8083 + tristate "Philips TDA8083 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TDA10086 + tristate "Philips TDA10086 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TDA8261 + tristate "Philips TDA8261 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_VES1X93 + tristate "VLSI VES1893 or VES1993 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TUNER_ITD1000 + tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TUNER_CX24113 + tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + + +config DVB_TDA826X + tristate "Philips TDA826X silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + +config DVB_TUA6100 + tristate "Infineon TUA6100 PLL" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S PLL chip. + +config DVB_CX24116 + tristate "Conexant CX24116 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 tuner module. Say Y when you want to support this frontend. + +config DVB_SI21XX + tristate "Silicon Labs SI21XX based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TS2020 + tristate "Montage Tehnology TS2020 based tuners" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 silicon tuner. Say Y when you want to support this tuner. + +config DVB_DS3000 + tristate "Montage Tehnology DS3000 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 tuner module. Say Y when you want to support this frontend. + +config DVB_MB86A16 + tristate "Fujitsu MB86A16 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/DSS Direct Conversion reveiver. + Say Y when you want to support this frontend. + +config DVB_TDA10071 + tristate "NXP TDA10071" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +comment "DVB-T (terrestrial) frontends" + depends on DVB_CORE + +config DVB_SP8870 + tristate "Spase sp8870 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + + This driver needs external firmware. Please use the command + "/Documentation/dvb/get_dvb_firmware sp8870" to + download/extract it, and then copy it to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_SP887X + tristate "Spase sp887x based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + + This driver needs external firmware. Please use the command + "/Documentation/dvb/get_dvb_firmware sp887x" to + download/extract it, and then copy it to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_CX22700 + tristate "Conexant CX22700 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_CX22702 + tristate "Conexant cx22702 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_S5H1432 + tristate "Samsung s5h1432 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_DRXD + tristate "Micronas DRXD driver" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + + Note: this driver was based on vendor driver reference code (released + under the GPL) as opposed to the existing drx397xd driver, which + was written via reverse engineering. + +config DVB_L64781 + tristate "LSI L64781" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_TDA1004X + tristate "Philips TDA10045H/TDA10046H based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + + This driver needs external firmware. Please use the commands + "/Documentation/dvb/get_dvb_firmware tda10045", + "/Documentation/dvb/get_dvb_firmware tda10046" to + download/extract them, and then copy them to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_NXT6000 + tristate "NxtWave Communications NXT6000 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_MT352 + tristate "Zarlink MT352 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_ZL10353 + tristate "Zarlink ZL10353 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_DIB3000MB + tristate "DiBcom 3000M-B" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DIB3000MC + tristate "DiBcom 3000P/M-C" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DIB7000M + tristate "DiBcom 7000MA/MB/PA/PB/MC" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DIB7000P + tristate "DiBcom 7000PC" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DIB9000 + tristate "DiBcom 9000" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_TDA10048 + tristate "Philips TDA10048HN based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_AF9013 + tristate "Afatech AF9013 demodulator" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_EC100 + tristate "E3C EC100" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_HD29L2 + tristate "HDIC HD29L2" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_STV0367 + tristate "ST STV0367 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T/C tuner module. Say Y when you want to support this frontend. + +config DVB_CXD2820R + tristate "Sony CXD2820R" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_RTL2830 + tristate "Realtek RTL2830 DVB-T" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_RTL2832 + tristate "Realtek RTL2832 DVB-T" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +comment "DVB-C (cable) frontends" + depends on DVB_CORE + +config DVB_VES1820 + tristate "VLSI VES1820 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C tuner module. Say Y when you want to support this frontend. + +config DVB_TDA10021 + tristate "Philips TDA10021 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C tuner module. Say Y when you want to support this frontend. + +config DVB_TDA10023 + tristate "Philips TDA10023 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C tuner module. Say Y when you want to support this frontend. + +config DVB_STV0297 + tristate "ST STV0297 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C tuner module. Say Y when you want to support this frontend. + +comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends" + depends on DVB_CORE + +config DVB_NXT200X + tristate "NxtWave Communications NXT2002/NXT2004 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + + This driver needs external firmware. Please use the commands + "/Documentation/dvb/get_dvb_firmware nxt2002" and + "/Documentation/dvb/get_dvb_firmware nxt2004" to + download/extract them, and then copy them to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_OR51211 + tristate "Oren OR51211 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB tuner module. Say Y when you want to support this frontend. + + This driver needs external firmware. Please use the command + "/Documentation/dvb/get_dvb_firmware or51211" to + download it, and then copy it to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_OR51132 + tristate "Oren OR51132 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + + This driver needs external firmware. Please use the commands + "/Documentation/dvb/get_dvb_firmware or51132_vsb" and/or + "/Documentation/dvb/get_dvb_firmware or51132_qam" to + download firmwares for 8VSB and QAM64/256, respectively. Copy them to + /usr/lib/hotplug/firmware or /lib/firmware (depending on + configuration of firmware hotplug). + +config DVB_BCM3510 + tristate "Broadcom BCM3510" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to + support this frontend. + +config DVB_LGDT330X + tristate "LG Electronics LGDT3302/LGDT3303 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + +config DVB_LGDT3305 + tristate "LG Electronics LGDT3304 and LGDT3305 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + +config DVB_LG2160 + tristate "LG Electronics LG216x based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC/MH demodulator module. Say Y when you want + to support this frontend. + +config DVB_S5H1409 + tristate "Samsung S5H1409 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + +config DVB_AU8522 + depends on I2C + tristate + +config DVB_AU8522_DTV + tristate "Auvitek AU8522 based DTV demod" + depends on DVB_CORE && I2C + select DVB_AU8522 + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when + you want to enable DTV demodulation support for this frontend. + +config DVB_AU8522_V4L + tristate "Auvitek AU8522 based ATV demod" + depends on VIDEO_V4L2 && I2C + select DVB_AU8522 + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when + you want to enable ATV demodulation support for this frontend. + +config DVB_S5H1411 + tristate "Samsung S5H1411 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + +comment "ISDB-T (terrestrial) frontends" + depends on DVB_CORE + +config DVB_S921 + tristate "Sharp S921 frontend" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module. + Say Y when you want to support this frontend. + +config DVB_DIB8000 + tristate "DiBcom 8000MB/MC" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator. + Say Y when you want to support this frontend. + +config DVB_MB86A20S + tristate "Fujitsu mb86a20s" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator. + Say Y when you want to support this frontend. + +comment "Digital terrestrial only tuners/PLL" + depends on DVB_CORE + +config DVB_PLL + tristate "Generic I2C PLL based tuners" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + This module drives a number of tuners based on PLL chips with a + common I2C interface. Say Y when you want to support these tuners. + +config DVB_TUNER_DIB0070 + tristate "DiBcom DiB0070 silicon base-band tuner" + depends on I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for the silicon baseband tuner DiB0070 from DiBcom. + This device is only used inside a SiP called together with a + demodulator for now. + +config DVB_TUNER_DIB0090 + tristate "DiBcom DiB0090 silicon base-band tuner" + depends on I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for the silicon baseband tuner DiB0090 from DiBcom. + This device is only used inside a SiP called together with a + demodulator for now. + +comment "SEC control devices for DVB-S" + depends on DVB_CORE + +config DVB_LNBP21 + tristate "LNBP21/LNBH24 SEC controllers" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An SEC control chips. + +config DVB_LNBP22 + tristate "LNBP22 SEC controllers" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + LNB power supply and control voltage + regulator chip with step-up converter + and I2C interface. + Say Y when you want to support this chip. + +config DVB_ISL6405 + tristate "ISL6405 SEC controller" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An SEC control chip. + +config DVB_ISL6421 + tristate "ISL6421 SEC controller" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An SEC control chip. + +config DVB_ISL6423 + tristate "ISL6423 SEC controller" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A SEC controller chip from Intersil + +config DVB_A8293 + tristate "Allegro A8293" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + +config DVB_LGS8GL5 + tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + +config DVB_LGS8GXX + tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator" + depends on DVB_CORE && I2C + select FW_LOADER + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + +config DVB_ATBM8830 + tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + +config DVB_TDA665x + tristate "TDA665x tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Support for tuner modules based on Philips TDA6650/TDA6651 chips. + Say Y when you want to support this chip. + + Currently supported tuners: + * Panasonic ENV57H12D5 (ET-50DT) + +config DVB_IX2505V + tristate "Sharp IX2505V silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_IT913X_FE + tristate "it913x frontend and it9137 tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. + Say Y when you want to support this frontend. + +config DVB_M88RS2000 + tristate "M88RS2000 DVB-S demodulator and tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. + Say Y when you want to support this frontend. + +config DVB_AF9033 + tristate "Afatech AF9033 DVB-T demodulator" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + +comment "Tools to develop new frontends" + +config DVB_DUMMY_FE + tristate "Dummy frontend driver" + default n +endmenu diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile new file mode 100644 index 00000000..cebc0faf --- /dev/null +++ b/drivers/media/dvb-frontends/Makefile @@ -0,0 +1,106 @@ +# +# Makefile for the kernel DVB frontend device drivers. +# + +ccflags-y += -I$(srctree)/drivers/media/dvb-core/ +ccflags-y += -I$(srctree)/drivers/media/tuners/ + +stb0899-objs := stb0899_drv.o stb0899_algo.o +stv0900-objs := stv0900_core.o stv0900_sw.o +drxd-objs := drxd_firm.o drxd_hard.o +cxd2820r-objs := cxd2820r_core.o cxd2820r_c.o cxd2820r_t.o cxd2820r_t2.o +drxk-objs := drxk_hard.o + +obj-$(CONFIG_DVB_PLL) += dvb-pll.o +obj-$(CONFIG_DVB_STV0299) += stv0299.o +obj-$(CONFIG_DVB_STB0899) += stb0899.o +obj-$(CONFIG_DVB_STB6100) += stb6100.o +obj-$(CONFIG_DVB_SP8870) += sp8870.o +obj-$(CONFIG_DVB_CX22700) += cx22700.o +obj-$(CONFIG_DVB_S5H1432) += s5h1432.o +obj-$(CONFIG_DVB_CX24110) += cx24110.o +obj-$(CONFIG_DVB_TDA8083) += tda8083.o +obj-$(CONFIG_DVB_L64781) += l64781.o +obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o +obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o +obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o +obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o +obj-$(CONFIG_DVB_DIB8000) += dib8000.o dibx000_common.o +obj-$(CONFIG_DVB_DIB9000) += dib9000.o dibx000_common.o +obj-$(CONFIG_DVB_MT312) += mt312.o +obj-$(CONFIG_DVB_VES1820) += ves1820.o +obj-$(CONFIG_DVB_VES1X93) += ves1x93.o +obj-$(CONFIG_DVB_TDA1004X) += tda1004x.o +obj-$(CONFIG_DVB_SP887X) += sp887x.o +obj-$(CONFIG_DVB_NXT6000) += nxt6000.o +obj-$(CONFIG_DVB_MT352) += mt352.o +obj-$(CONFIG_DVB_ZL10036) += zl10036.o +obj-$(CONFIG_DVB_ZL10039) += zl10039.o +obj-$(CONFIG_DVB_ZL10353) += zl10353.o +obj-$(CONFIG_DVB_CX22702) += cx22702.o +obj-$(CONFIG_DVB_DRXD) += drxd.o +obj-$(CONFIG_DVB_TDA10021) += tda10021.o +obj-$(CONFIG_DVB_TDA10023) += tda10023.o +obj-$(CONFIG_DVB_STV0297) += stv0297.o +obj-$(CONFIG_DVB_NXT200X) += nxt200x.o +obj-$(CONFIG_DVB_OR51211) += or51211.o +obj-$(CONFIG_DVB_OR51132) += or51132.o +obj-$(CONFIG_DVB_BCM3510) += bcm3510.o +obj-$(CONFIG_DVB_S5H1420) += s5h1420.o +obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o +obj-$(CONFIG_DVB_LGDT3305) += lgdt3305.o +obj-$(CONFIG_DVB_LG2160) += lg2160.o +obj-$(CONFIG_DVB_CX24123) += cx24123.o +obj-$(CONFIG_DVB_LNBP21) += lnbp21.o +obj-$(CONFIG_DVB_LNBP22) += lnbp22.o +obj-$(CONFIG_DVB_ISL6405) += isl6405.o +obj-$(CONFIG_DVB_ISL6421) += isl6421.o +obj-$(CONFIG_DVB_TDA10086) += tda10086.o +obj-$(CONFIG_DVB_TDA826X) += tda826x.o +obj-$(CONFIG_DVB_TDA8261) += tda8261.o +obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o +obj-$(CONFIG_DVB_TUNER_DIB0090) += dib0090.o +obj-$(CONFIG_DVB_TUA6100) += tua6100.o +obj-$(CONFIG_DVB_S5H1409) += s5h1409.o +obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o +obj-$(CONFIG_DVB_AU8522) += au8522_common.o +obj-$(CONFIG_DVB_AU8522_DTV) += au8522_dig.o +obj-$(CONFIG_DVB_AU8522_V4L) += au8522_decoder.o +obj-$(CONFIG_DVB_TDA10048) += tda10048.o +obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o +obj-$(CONFIG_DVB_S5H1411) += s5h1411.o +obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o +obj-$(CONFIG_DVB_TDA665x) += tda665x.o +obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o +obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o +obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o +obj-$(CONFIG_DVB_AF9013) += af9013.o +obj-$(CONFIG_DVB_CX24116) += cx24116.o +obj-$(CONFIG_DVB_SI21XX) += si21xx.o +obj-$(CONFIG_DVB_STV0288) += stv0288.o +obj-$(CONFIG_DVB_STB6000) += stb6000.o +obj-$(CONFIG_DVB_S921) += s921.o +obj-$(CONFIG_DVB_STV6110) += stv6110.o +obj-$(CONFIG_DVB_STV0900) += stv0900.o +obj-$(CONFIG_DVB_STV090x) += stv090x.o +obj-$(CONFIG_DVB_STV6110x) += stv6110x.o +obj-$(CONFIG_DVB_ISL6423) += isl6423.o +obj-$(CONFIG_DVB_EC100) += ec100.o +obj-$(CONFIG_DVB_HD29L2) += hd29l2.o +obj-$(CONFIG_DVB_DS3000) += ds3000.o +obj-$(CONFIG_DVB_TS2020) += ts2020.o +obj-$(CONFIG_DVB_MB86A16) += mb86a16.o +obj-$(CONFIG_DVB_MB86A20S) += mb86a20s.o +obj-$(CONFIG_DVB_IX2505V) += ix2505v.o +obj-$(CONFIG_DVB_STV0367) += stv0367.o +obj-$(CONFIG_DVB_CXD2820R) += cxd2820r.o +obj-$(CONFIG_DVB_DRXK) += drxk.o +obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o +obj-$(CONFIG_DVB_IT913X_FE) += it913x-fe.o +obj-$(CONFIG_DVB_A8293) += a8293.o +obj-$(CONFIG_DVB_TDA10071) += tda10071.o +obj-$(CONFIG_DVB_RTL2830) += rtl2830.o +obj-$(CONFIG_DVB_RTL2832) += rtl2832.o +obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o +obj-$(CONFIG_DVB_AF9033) += af9033.o + diff --git a/drivers/media/dvb-frontends/a8293.c b/drivers/media/dvb-frontends/a8293.c new file mode 100644 index 00000000..74fbb5d5 --- /dev/null +++ b/drivers/media/dvb-frontends/a8293.c @@ -0,0 +1,167 @@ +/* + * Allegro A8293 SEC driver + * + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "dvb_frontend.h" +#include "a8293.h" + +struct a8293_priv { + struct i2c_adapter *i2c; + const struct a8293_config *cfg; + u8 reg[2]; +}; + +static int a8293_i2c(struct a8293_priv *priv, u8 *val, int len, bool rd) +{ + int ret; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg->i2c_addr, + .len = len, + .buf = val, + } + }; + + if (rd) + msg[0].flags = I2C_M_RD; + else + msg[0].flags = 0; + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c failed=%d rd=%d\n", + KBUILD_MODNAME, ret, rd); + ret = -EREMOTEIO; + } + + return ret; +} + +static int a8293_wr(struct a8293_priv *priv, u8 *val, int len) +{ + return a8293_i2c(priv, val, len, 0); +} + +static int a8293_rd(struct a8293_priv *priv, u8 *val, int len) +{ + return a8293_i2c(priv, val, len, 1); +} + +static int a8293_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t fe_sec_voltage) +{ + struct a8293_priv *priv = fe->sec_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: fe_sec_voltage=%d\n", __func__, + fe_sec_voltage); + + switch (fe_sec_voltage) { + case SEC_VOLTAGE_OFF: + /* ENB=0 */ + priv->reg[0] = 0x10; + break; + case SEC_VOLTAGE_13: + /* VSEL0=1, VSEL1=0, VSEL2=0, VSEL3=0, ENB=1*/ + priv->reg[0] = 0x31; + break; + case SEC_VOLTAGE_18: + /* VSEL0=0, VSEL1=0, VSEL2=0, VSEL3=1, ENB=1*/ + priv->reg[0] = 0x38; + break; + default: + ret = -EINVAL; + goto err; + } + + ret = a8293_wr(priv, &priv->reg[0], 1); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static void a8293_release_sec(struct dvb_frontend *fe) +{ + a8293_set_voltage(fe, SEC_VOLTAGE_OFF); + + kfree(fe->sec_priv); + fe->sec_priv = NULL; +} + +struct dvb_frontend *a8293_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct a8293_config *cfg) +{ + int ret; + struct a8293_priv *priv = NULL; + u8 buf[2]; + + /* allocate memory for the internal priv */ + priv = kzalloc(sizeof(struct a8293_priv), GFP_KERNEL); + if (priv == NULL) { + ret = -ENOMEM; + goto err; + } + + /* setup the priv */ + priv->i2c = i2c; + priv->cfg = cfg; + fe->sec_priv = priv; + + /* check if the SEC is there */ + ret = a8293_rd(priv, buf, 2); + if (ret) + goto err; + + /* ENB=0 */ + priv->reg[0] = 0x10; + ret = a8293_wr(priv, &priv->reg[0], 1); + if (ret) + goto err; + + /* TMODE=0, TGATE=1 */ + priv->reg[1] = 0x82; + ret = a8293_wr(priv, &priv->reg[1], 1); + if (ret) + goto err; + + fe->ops.release_sec = a8293_release_sec; + + /* override frontend ops */ + fe->ops.set_voltage = a8293_set_voltage; + + dev_info(&priv->i2c->dev, "%s: Allegro A8293 SEC attached\n", + KBUILD_MODNAME); + + return fe; +err: + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(a8293_attach); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Allegro A8293 SEC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/a8293.h b/drivers/media/dvb-frontends/a8293.h new file mode 100644 index 00000000..b6ef6427 --- /dev/null +++ b/drivers/media/dvb-frontends/a8293.h @@ -0,0 +1,42 @@ +/* + * Allegro A8293 SEC driver + * + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef A8293_H +#define A8293_H + +#include + +struct a8293_config { + u8 i2c_addr; +}; + +#if IS_ENABLED(CONFIG_DVB_A8293) +extern struct dvb_frontend *a8293_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct a8293_config *cfg); +#else +static inline struct dvb_frontend *a8293_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct a8293_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* A8293_H */ diff --git a/drivers/media/dvb-frontends/af9013.c b/drivers/media/dvb-frontends/af9013.c new file mode 100644 index 00000000..fb504f1e --- /dev/null +++ b/drivers/media/dvb-frontends/af9013.c @@ -0,0 +1,1558 @@ +/* + * Afatech AF9013 demodulator driver + * + * Copyright (C) 2007 Antti Palosaari + * Copyright (C) 2011 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "af9013_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +struct af9013_state { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct af9013_config config; + + /* tuner/demod RF and IF AGC limits used for signal strength calc */ + u8 signal_strength_en, rf_50, rf_80, if_50, if_80; + u16 signal_strength; + u32 ber; + u32 ucblocks; + u16 snr; + u32 bandwidth_hz; + fe_status_t fe_status; + unsigned long set_frontend_jiffies; + unsigned long read_status_jiffies; + bool first_tune; + bool i2c_gate_state; + unsigned int statistics_step:3; + struct delayed_work statistics_work; +}; + +/* write multiple registers */ +static int af9013_wr_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg, + const u8 *val, int len) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg[1] = { + { + .addr = priv->config.i2c_addr, + .flags = 0, + .len = 3 + len, + .buf = buf, + } + }; + + if (3 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + buf[0] = (reg >> 8) & 0xff; + buf[1] = (reg >> 0) & 0xff; + buf[2] = mbox; + memcpy(&buf[3], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%04x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple registers */ +static int af9013_rd_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg, + u8 *val, int len) +{ + int ret; + u8 buf[3]; + struct i2c_msg msg[2] = { + { + .addr = priv->config.i2c_addr, + .flags = 0, + .len = 3, + .buf = buf, + }, { + .addr = priv->config.i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = val, + } + }; + + buf[0] = (reg >> 8) & 0xff; + buf[1] = (reg >> 0) & 0xff; + buf[2] = mbox; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%04x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* write multiple registers */ +static int af9013_wr_regs(struct af9013_state *priv, u16 reg, const u8 *val, + int len) +{ + int ret, i; + u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(1 << 0); + + if ((priv->config.ts_mode == AF9013_TS_USB) && + ((reg & 0xff00) != 0xff00) && ((reg & 0xff00) != 0xae00)) { + mbox |= ((len - 1) << 2); + ret = af9013_wr_regs_i2c(priv, mbox, reg, val, len); + } else { + for (i = 0; i < len; i++) { + ret = af9013_wr_regs_i2c(priv, mbox, reg+i, val+i, 1); + if (ret) + goto err; + } + } + +err: + return 0; +} + +/* read multiple registers */ +static int af9013_rd_regs(struct af9013_state *priv, u16 reg, u8 *val, int len) +{ + int ret, i; + u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(0 << 0); + + if ((priv->config.ts_mode == AF9013_TS_USB) && + ((reg & 0xff00) != 0xff00) && ((reg & 0xff00) != 0xae00)) { + mbox |= ((len - 1) << 2); + ret = af9013_rd_regs_i2c(priv, mbox, reg, val, len); + } else { + for (i = 0; i < len; i++) { + ret = af9013_rd_regs_i2c(priv, mbox, reg+i, val+i, 1); + if (ret) + goto err; + } + } + +err: + return 0; +} + +/* write single register */ +static int af9013_wr_reg(struct af9013_state *priv, u16 reg, u8 val) +{ + return af9013_wr_regs(priv, reg, &val, 1); +} + +/* read single register */ +static int af9013_rd_reg(struct af9013_state *priv, u16 reg, u8 *val) +{ + return af9013_rd_regs(priv, reg, val, 1); +} + +static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val, + u8 len) +{ + u8 mbox = (1 << 7)|(1 << 6)|((len - 1) << 2)|(1 << 1)|(1 << 0); + return af9013_wr_regs_i2c(state, mbox, reg, val, len); +} + +static int af9013_wr_reg_bits(struct af9013_state *state, u16 reg, int pos, + int len, u8 val) +{ + int ret; + u8 tmp, mask; + + /* no need for read if whole reg is written */ + if (len != 8) { + ret = af9013_rd_reg(state, reg, &tmp); + if (ret) + return ret; + + mask = (0xff >> (8 - len)) << pos; + val <<= pos; + tmp &= ~mask; + val |= tmp; + } + + return af9013_wr_reg(state, reg, val); +} + +static int af9013_rd_reg_bits(struct af9013_state *state, u16 reg, int pos, + int len, u8 *val) +{ + int ret; + u8 tmp; + + ret = af9013_rd_reg(state, reg, &tmp); + if (ret) + return ret; + + *val = (tmp >> pos); + *val &= (0xff >> (8 - len)); + + return 0; +} + +static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) +{ + int ret; + u8 pos; + u16 addr; + + dev_dbg(&state->i2c->dev, "%s: gpio=%d gpioval=%02x\n", + __func__, gpio, gpioval); + + /* + * GPIO0 & GPIO1 0xd735 + * GPIO2 & GPIO3 0xd736 + */ + + switch (gpio) { + case 0: + case 1: + addr = 0xd735; + break; + case 2: + case 3: + addr = 0xd736; + break; + + default: + dev_err(&state->i2c->dev, "%s: invalid gpio=%d\n", + KBUILD_MODNAME, gpio); + ret = -EINVAL; + goto err; + } + + switch (gpio) { + case 0: + case 2: + pos = 0; + break; + case 1: + case 3: + default: + pos = 4; + break; + } + + ret = af9013_wr_reg_bits(state, addr, pos, 4, gpioval); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static u32 af9013_div(struct af9013_state *state, u32 a, u32 b, u32 x) +{ + u32 r = 0, c = 0, i; + + dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d\n", __func__, a, b, x); + + if (a > b) { + c = a / b; + a = a - c * b; + } + + for (i = 0; i < x; i++) { + if (a >= b) { + r += 1; + a -= b; + } + a <<= 1; + r <<= 1; + } + r = (c << (u32)x) + r; + + dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d r=%d r=%x\n", + __func__, a, b, x, r, r); + + return r; +} + +static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) +{ + int ret, i; + u8 tmp; + + dev_dbg(&state->i2c->dev, "%s: onoff=%d\n", __func__, onoff); + + /* enable reset */ + ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 1); + if (ret) + goto err; + + /* start reset mechanism */ + ret = af9013_wr_reg(state, 0xaeff, 1); + if (ret) + goto err; + + /* wait reset performs */ + for (i = 0; i < 150; i++) { + ret = af9013_rd_reg_bits(state, 0xd417, 1, 1, &tmp); + if (ret) + goto err; + + if (tmp) + break; /* reset done */ + + usleep_range(5000, 25000); + } + + if (!tmp) + return -ETIMEDOUT; + + if (onoff) { + /* clear reset */ + ret = af9013_wr_reg_bits(state, 0xd417, 1, 1, 0); + if (ret) + goto err; + + /* disable reset */ + ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 0); + + /* power on */ + ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 0); + } else { + /* power off */ + ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 1); + } + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + /* reset and start BER counter */ + ret = af9013_wr_reg_bits(state, 0xd391, 4, 1, 1); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 buf[5]; + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + /* check if error bit count is ready */ + ret = af9013_rd_reg_bits(state, 0xd391, 4, 1, &buf[0]); + if (ret) + goto err; + + if (!buf[0]) { + dev_dbg(&state->i2c->dev, "%s: not ready\n", __func__); + return 0; + } + + ret = af9013_rd_regs(state, 0xd387, buf, 5); + if (ret) + goto err; + + state->ber = (buf[2] << 16) | (buf[1] << 8) | buf[0]; + state->ucblocks += (buf[4] << 8) | buf[3]; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_statistics_snr_start(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + /* start SNR meas */ + ret = af9013_wr_reg_bits(state, 0xd2e1, 3, 1, 1); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_statistics_snr_result(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret, i, len; + u8 buf[3], tmp; + u32 snr_val; + const struct af9013_snr *uninitialized_var(snr_lut); + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + /* check if SNR ready */ + ret = af9013_rd_reg_bits(state, 0xd2e1, 3, 1, &tmp); + if (ret) + goto err; + + if (!tmp) { + dev_dbg(&state->i2c->dev, "%s: not ready\n", __func__); + return 0; + } + + /* read value */ + ret = af9013_rd_regs(state, 0xd2e3, buf, 3); + if (ret) + goto err; + + snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0]; + + /* read current modulation */ + ret = af9013_rd_reg(state, 0xd3c1, &tmp); + if (ret) + goto err; + + switch ((tmp >> 6) & 3) { + case 0: + len = ARRAY_SIZE(qpsk_snr_lut); + snr_lut = qpsk_snr_lut; + break; + case 1: + len = ARRAY_SIZE(qam16_snr_lut); + snr_lut = qam16_snr_lut; + break; + case 2: + len = ARRAY_SIZE(qam64_snr_lut); + snr_lut = qam64_snr_lut; + break; + default: + goto err; + break; + } + + for (i = 0; i < len; i++) { + tmp = snr_lut[i].snr; + + if (snr_val < snr_lut[i].val) + break; + } + state->snr = tmp * 10; /* dB/10 */ + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_statistics_signal_strength(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret = 0; + u8 buf[2], rf_gain, if_gain; + int signal_strength; + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + if (!state->signal_strength_en) + return 0; + + ret = af9013_rd_regs(state, 0xd07c, buf, 2); + if (ret) + goto err; + + rf_gain = buf[0]; + if_gain = buf[1]; + + signal_strength = (0xffff / \ + (9 * (state->rf_50 + state->if_50) - \ + 11 * (state->rf_80 + state->if_80))) * \ + (10 * (rf_gain + if_gain) - \ + 11 * (state->rf_80 + state->if_80)); + if (signal_strength < 0) + signal_strength = 0; + else if (signal_strength > 0xffff) + signal_strength = 0xffff; + + state->signal_strength = signal_strength; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static void af9013_statistics_work(struct work_struct *work) +{ + struct af9013_state *state = container_of(work, + struct af9013_state, statistics_work.work); + unsigned int next_msec; + + /* update only signal strength when demod is not locked */ + if (!(state->fe_status & FE_HAS_LOCK)) { + state->statistics_step = 0; + state->ber = 0; + state->snr = 0; + } + + switch (state->statistics_step) { + default: + state->statistics_step = 0; + case 0: + af9013_statistics_signal_strength(&state->fe); + state->statistics_step++; + next_msec = 300; + break; + case 1: + af9013_statistics_snr_start(&state->fe); + state->statistics_step++; + next_msec = 200; + break; + case 2: + af9013_statistics_ber_unc_start(&state->fe); + state->statistics_step++; + next_msec = 1000; + break; + case 3: + af9013_statistics_snr_result(&state->fe); + state->statistics_step++; + next_msec = 400; + break; + case 4: + af9013_statistics_ber_unc_result(&state->fe); + state->statistics_step++; + next_msec = 100; + break; + } + + schedule_delayed_work(&state->statistics_work, + msecs_to_jiffies(next_msec)); +} + +static int af9013_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 800; + fesettings->step_size = 0; + fesettings->max_drift = 0; + + return 0; +} + +static int af9013_set_frontend(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i, sampling_freq; + bool auto_mode, spec_inv; + u8 buf[6]; + u32 if_frequency, freq_cw; + + dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", + __func__, c->frequency, c->bandwidth_hz); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* program CFOE coefficients */ + if (c->bandwidth_hz != state->bandwidth_hz) { + for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) { + if (coeff_lut[i].clock == state->config.clock && + coeff_lut[i].bandwidth_hz == c->bandwidth_hz) { + break; + } + } + + ret = af9013_wr_regs(state, 0xae00, coeff_lut[i].val, + sizeof(coeff_lut[i].val)); + } + + /* program frequency control */ + if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) { + /* get used IF frequency */ + if (fe->ops.tuner_ops.get_if_frequency) + fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); + else + if_frequency = state->config.if_frequency; + + dev_dbg(&state->i2c->dev, "%s: if_frequency=%d\n", + __func__, if_frequency); + + sampling_freq = if_frequency; + + while (sampling_freq > (state->config.clock / 2)) + sampling_freq -= state->config.clock; + + if (sampling_freq < 0) { + sampling_freq *= -1; + spec_inv = state->config.spec_inv; + } else { + spec_inv = !state->config.spec_inv; + } + + freq_cw = af9013_div(state, sampling_freq, state->config.clock, + 23); + + if (spec_inv) + freq_cw = 0x800000 - freq_cw; + + buf[0] = (freq_cw >> 0) & 0xff; + buf[1] = (freq_cw >> 8) & 0xff; + buf[2] = (freq_cw >> 16) & 0x7f; + + freq_cw = 0x800000 - freq_cw; + + buf[3] = (freq_cw >> 0) & 0xff; + buf[4] = (freq_cw >> 8) & 0xff; + buf[5] = (freq_cw >> 16) & 0x7f; + + ret = af9013_wr_regs(state, 0xd140, buf, 3); + if (ret) + goto err; + + ret = af9013_wr_regs(state, 0x9be7, buf, 6); + if (ret) + goto err; + } + + /* clear TPS lock flag */ + ret = af9013_wr_reg_bits(state, 0xd330, 3, 1, 1); + if (ret) + goto err; + + /* clear MPEG2 lock flag */ + ret = af9013_wr_reg_bits(state, 0xd507, 6, 1, 0); + if (ret) + goto err; + + /* empty channel function */ + ret = af9013_wr_reg_bits(state, 0x9bfe, 0, 1, 0); + if (ret) + goto err; + + /* empty DVB-T channel function */ + ret = af9013_wr_reg_bits(state, 0x9bc2, 0, 1, 0); + if (ret) + goto err; + + /* transmission parameters */ + auto_mode = false; + memset(buf, 0, 3); + + switch (c->transmission_mode) { + case TRANSMISSION_MODE_AUTO: + auto_mode = 1; + break; + case TRANSMISSION_MODE_2K: + break; + case TRANSMISSION_MODE_8K: + buf[0] |= (1 << 0); + break; + default: + dev_dbg(&state->i2c->dev, "%s: invalid transmission_mode\n", + __func__); + auto_mode = 1; + } + + switch (c->guard_interval) { + case GUARD_INTERVAL_AUTO: + auto_mode = 1; + break; + case GUARD_INTERVAL_1_32: + break; + case GUARD_INTERVAL_1_16: + buf[0] |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + buf[0] |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + buf[0] |= (3 << 2); + break; + default: + dev_dbg(&state->i2c->dev, "%s: invalid guard_interval\n", + __func__); + auto_mode = 1; + } + + switch (c->hierarchy) { + case HIERARCHY_AUTO: + auto_mode = 1; + break; + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + buf[0] |= (1 << 4); + break; + case HIERARCHY_2: + buf[0] |= (2 << 4); + break; + case HIERARCHY_4: + buf[0] |= (3 << 4); + break; + default: + dev_dbg(&state->i2c->dev, "%s: invalid hierarchy\n", __func__); + auto_mode = 1; + } + + switch (c->modulation) { + case QAM_AUTO: + auto_mode = 1; + break; + case QPSK: + break; + case QAM_16: + buf[1] |= (1 << 6); + break; + case QAM_64: + buf[1] |= (2 << 6); + break; + default: + dev_dbg(&state->i2c->dev, "%s: invalid modulation\n", __func__); + auto_mode = 1; + } + + /* Use HP. How and which case we can switch to LP? */ + buf[1] |= (1 << 4); + + switch (c->code_rate_HP) { + case FEC_AUTO: + auto_mode = 1; + break; + case FEC_1_2: + break; + case FEC_2_3: + buf[2] |= (1 << 0); + break; + case FEC_3_4: + buf[2] |= (2 << 0); + break; + case FEC_5_6: + buf[2] |= (3 << 0); + break; + case FEC_7_8: + buf[2] |= (4 << 0); + break; + default: + dev_dbg(&state->i2c->dev, "%s: invalid code_rate_HP\n", + __func__); + auto_mode = 1; + } + + switch (c->code_rate_LP) { + case FEC_AUTO: + auto_mode = 1; + break; + case FEC_1_2: + break; + case FEC_2_3: + buf[2] |= (1 << 3); + break; + case FEC_3_4: + buf[2] |= (2 << 3); + break; + case FEC_5_6: + buf[2] |= (3 << 3); + break; + case FEC_7_8: + buf[2] |= (4 << 3); + break; + case FEC_NONE: + break; + default: + dev_dbg(&state->i2c->dev, "%s: invalid code_rate_LP\n", + __func__); + auto_mode = 1; + } + + switch (c->bandwidth_hz) { + case 6000000: + break; + case 7000000: + buf[1] |= (1 << 2); + break; + case 8000000: + buf[1] |= (2 << 2); + break; + default: + dev_dbg(&state->i2c->dev, "%s: invalid bandwidth_hz\n", + __func__); + ret = -EINVAL; + goto err; + } + + ret = af9013_wr_regs(state, 0xd3c0, buf, 3); + if (ret) + goto err; + + if (auto_mode) { + /* clear easy mode flag */ + ret = af9013_wr_reg(state, 0xaefd, 0); + if (ret) + goto err; + + dev_dbg(&state->i2c->dev, "%s: auto params\n", __func__); + } else { + /* set easy mode flag */ + ret = af9013_wr_reg(state, 0xaefd, 1); + if (ret) + goto err; + + ret = af9013_wr_reg(state, 0xaefe, 0); + if (ret) + goto err; + + dev_dbg(&state->i2c->dev, "%s: manual params\n", __func__); + } + + /* tune */ + ret = af9013_wr_reg(state, 0xffff, 0); + if (ret) + goto err; + + state->bandwidth_hz = c->bandwidth_hz; + state->set_frontend_jiffies = jiffies; + state->first_tune = false; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 buf[3]; + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + ret = af9013_rd_regs(state, 0xd3c0, buf, 3); + if (ret) + goto err; + + switch ((buf[1] >> 6) & 3) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + } + + switch ((buf[0] >> 0) & 3) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_8K; + } + + switch ((buf[0] >> 2) & 3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[0] >> 4) & 7) { + case 0: + c->hierarchy = HIERARCHY_NONE; + break; + case 1: + c->hierarchy = HIERARCHY_1; + break; + case 2: + c->hierarchy = HIERARCHY_2; + break; + case 3: + c->hierarchy = HIERARCHY_4; + break; + } + + switch ((buf[2] >> 0) & 7) { + case 0: + c->code_rate_HP = FEC_1_2; + break; + case 1: + c->code_rate_HP = FEC_2_3; + break; + case 2: + c->code_rate_HP = FEC_3_4; + break; + case 3: + c->code_rate_HP = FEC_5_6; + break; + case 4: + c->code_rate_HP = FEC_7_8; + break; + } + + switch ((buf[2] >> 3) & 7) { + case 0: + c->code_rate_LP = FEC_1_2; + break; + case 1: + c->code_rate_LP = FEC_2_3; + break; + case 2: + c->code_rate_LP = FEC_3_4; + break; + case 3: + c->code_rate_LP = FEC_5_6; + break; + case 4: + c->code_rate_LP = FEC_7_8; + break; + } + + switch ((buf[1] >> 2) & 3) { + case 0: + c->bandwidth_hz = 6000000; + break; + case 1: + c->bandwidth_hz = 7000000; + break; + case 2: + c->bandwidth_hz = 8000000; + break; + } + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 tmp; + + /* + * Return status from the cache if it is younger than 2000ms with the + * exception of last tune is done during 4000ms. + */ + if (time_is_after_jiffies( + state->read_status_jiffies + msecs_to_jiffies(2000)) && + time_is_before_jiffies( + state->set_frontend_jiffies + msecs_to_jiffies(4000)) + ) { + *status = state->fe_status; + return 0; + } else { + *status = 0; + } + + /* MPEG2 lock */ + ret = af9013_rd_reg_bits(state, 0xd507, 6, 1, &tmp); + if (ret) + goto err; + + if (tmp) + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | + FE_HAS_SYNC | FE_HAS_LOCK; + + if (!*status) { + /* TPS lock */ + ret = af9013_rd_reg_bits(state, 0xd330, 3, 1, &tmp); + if (ret) + goto err; + + if (tmp) + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI; + } + + state->fe_status = *status; + state->read_status_jiffies = jiffies; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct af9013_state *state = fe->demodulator_priv; + *snr = state->snr; + return 0; +} + +static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct af9013_state *state = fe->demodulator_priv; + *strength = state->signal_strength; + return 0; +} + +static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct af9013_state *state = fe->demodulator_priv; + *ber = state->ber; + return 0; +} + +static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct af9013_state *state = fe->demodulator_priv; + *ucblocks = state->ucblocks; + return 0; +} + +static int af9013_init(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret, i, len; + u8 buf[3], tmp; + u32 adc_cw; + const struct af9013_reg_bit *init; + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + /* power on */ + ret = af9013_power_ctrl(state, 1); + if (ret) + goto err; + + /* enable ADC */ + ret = af9013_wr_reg(state, 0xd73a, 0xa4); + if (ret) + goto err; + + /* write API version to firmware */ + ret = af9013_wr_regs(state, 0x9bf2, state->config.api_version, 4); + if (ret) + goto err; + + /* program ADC control */ + switch (state->config.clock) { + case 28800000: /* 28.800 MHz */ + tmp = 0; + break; + case 20480000: /* 20.480 MHz */ + tmp = 1; + break; + case 28000000: /* 28.000 MHz */ + tmp = 2; + break; + case 25000000: /* 25.000 MHz */ + tmp = 3; + break; + default: + dev_err(&state->i2c->dev, "%s: invalid clock\n", + KBUILD_MODNAME); + return -EINVAL; + } + + adc_cw = af9013_div(state, state->config.clock, 1000000ul, 19); + buf[0] = (adc_cw >> 0) & 0xff; + buf[1] = (adc_cw >> 8) & 0xff; + buf[2] = (adc_cw >> 16) & 0xff; + + ret = af9013_wr_regs(state, 0xd180, buf, 3); + if (ret) + goto err; + + ret = af9013_wr_reg_bits(state, 0x9bd2, 0, 4, tmp); + if (ret) + goto err; + + /* set I2C master clock */ + ret = af9013_wr_reg(state, 0xd416, 0x14); + if (ret) + goto err; + + /* set 16 embx */ + ret = af9013_wr_reg_bits(state, 0xd700, 1, 1, 1); + if (ret) + goto err; + + /* set no trigger */ + ret = af9013_wr_reg_bits(state, 0xd700, 2, 1, 0); + if (ret) + goto err; + + /* set read-update bit for constellation */ + ret = af9013_wr_reg_bits(state, 0xd371, 1, 1, 1); + if (ret) + goto err; + + /* settings for mp2if */ + if (state->config.ts_mode == AF9013_TS_USB) { + /* AF9015 split PSB to 1.5k + 0.5k */ + ret = af9013_wr_reg_bits(state, 0xd50b, 2, 1, 1); + if (ret) + goto err; + } else { + /* AF9013 change the output bit to data7 */ + ret = af9013_wr_reg_bits(state, 0xd500, 3, 1, 1); + if (ret) + goto err; + + /* AF9013 set mpeg to full speed */ + ret = af9013_wr_reg_bits(state, 0xd502, 4, 1, 1); + if (ret) + goto err; + } + + ret = af9013_wr_reg_bits(state, 0xd520, 4, 1, 1); + if (ret) + goto err; + + /* load OFSM settings */ + dev_dbg(&state->i2c->dev, "%s: load ofsm settings\n", __func__); + len = ARRAY_SIZE(ofsm_init); + init = ofsm_init; + for (i = 0; i < len; i++) { + ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos, + init[i].len, init[i].val); + if (ret) + goto err; + } + + /* load tuner specific settings */ + dev_dbg(&state->i2c->dev, "%s: load tuner specific settings\n", + __func__); + switch (state->config.tuner) { + case AF9013_TUNER_MXL5003D: + len = ARRAY_SIZE(tuner_init_mxl5003d); + init = tuner_init_mxl5003d; + break; + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + case AF9013_TUNER_MXL5007T: + len = ARRAY_SIZE(tuner_init_mxl5005); + init = tuner_init_mxl5005; + break; + case AF9013_TUNER_ENV77H11D5: + len = ARRAY_SIZE(tuner_init_env77h11d5); + init = tuner_init_env77h11d5; + break; + case AF9013_TUNER_MT2060: + len = ARRAY_SIZE(tuner_init_mt2060); + init = tuner_init_mt2060; + break; + case AF9013_TUNER_MC44S803: + len = ARRAY_SIZE(tuner_init_mc44s803); + init = tuner_init_mc44s803; + break; + case AF9013_TUNER_QT1010: + case AF9013_TUNER_QT1010A: + len = ARRAY_SIZE(tuner_init_qt1010); + init = tuner_init_qt1010; + break; + case AF9013_TUNER_MT2060_2: + len = ARRAY_SIZE(tuner_init_mt2060_2); + init = tuner_init_mt2060_2; + break; + case AF9013_TUNER_TDA18271: + case AF9013_TUNER_TDA18218: + len = ARRAY_SIZE(tuner_init_tda18271); + init = tuner_init_tda18271; + break; + case AF9013_TUNER_UNKNOWN: + default: + len = ARRAY_SIZE(tuner_init_unknown); + init = tuner_init_unknown; + break; + } + + for (i = 0; i < len; i++) { + ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos, + init[i].len, init[i].val); + if (ret) + goto err; + } + + /* TS mode */ + ret = af9013_wr_reg_bits(state, 0xd500, 1, 2, state->config.ts_mode); + if (ret) + goto err; + + /* enable lock led */ + ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 1); + if (ret) + goto err; + + /* check if we support signal strength */ + if (!state->signal_strength_en) { + ret = af9013_rd_reg_bits(state, 0x9bee, 0, 1, + &state->signal_strength_en); + if (ret) + goto err; + } + + /* read values needed for signal strength calculation */ + if (state->signal_strength_en && !state->rf_50) { + ret = af9013_rd_reg(state, 0x9bbd, &state->rf_50); + if (ret) + goto err; + + ret = af9013_rd_reg(state, 0x9bd0, &state->rf_80); + if (ret) + goto err; + + ret = af9013_rd_reg(state, 0x9be2, &state->if_50); + if (ret) + goto err; + + ret = af9013_rd_reg(state, 0x9be4, &state->if_80); + if (ret) + goto err; + } + + /* SNR */ + ret = af9013_wr_reg(state, 0xd2e2, 1); + if (ret) + goto err; + + /* BER / UCB */ + buf[0] = (10000 >> 0) & 0xff; + buf[1] = (10000 >> 8) & 0xff; + ret = af9013_wr_regs(state, 0xd385, buf, 2); + if (ret) + goto err; + + /* enable FEC monitor */ + ret = af9013_wr_reg_bits(state, 0xd392, 1, 1, 1); + if (ret) + goto err; + + state->first_tune = true; + schedule_delayed_work(&state->statistics_work, msecs_to_jiffies(400)); + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_sleep(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + /* stop statistics polling */ + cancel_delayed_work_sync(&state->statistics_work); + + /* disable lock led */ + ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 0); + if (ret) + goto err; + + /* power off */ + ret = af9013_power_ctrl(state, 0); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + int ret; + struct af9013_state *state = fe->demodulator_priv; + + dev_dbg(&state->i2c->dev, "%s: enable=%d\n", __func__, enable); + + /* gate already open or close */ + if (state->i2c_gate_state == enable) + return 0; + + if (state->config.ts_mode == AF9013_TS_USB) + ret = af9013_wr_reg_bits(state, 0xd417, 3, 1, enable); + else + ret = af9013_wr_reg_bits(state, 0xd607, 2, 1, enable); + if (ret) + goto err; + + state->i2c_gate_state = enable; + + return ret; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static void af9013_release(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops af9013_ops; + +static int af9013_download_firmware(struct af9013_state *state) +{ + int i, len, remaining, ret; + const struct firmware *fw; + u16 checksum = 0; + u8 val; + u8 fw_params[4]; + u8 *fw_file = AF9013_FIRMWARE; + + msleep(100); + /* check whether firmware is already running */ + ret = af9013_rd_reg(state, 0x98be, &val); + if (ret) + goto err; + else + dev_dbg(&state->i2c->dev, "%s: firmware status=%02x\n", + __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + dev_info(&state->i2c->dev, "%s: found a '%s' in cold state, will try " \ + "to load a firmware\n", + KBUILD_MODNAME, af9013_ops.info.name); + + /* request the firmware, this will block and timeout */ + ret = request_firmware(&fw, fw_file, state->i2c->dev.parent); + if (ret) { + dev_info(&state->i2c->dev, "%s: did not find the firmware " \ + "file. (%s) Please see linux/Documentation/dvb/ for " \ + "more details on firmware-problems. (%d)\n", + KBUILD_MODNAME, fw_file, ret); + goto err; + } + + dev_info(&state->i2c->dev, "%s: downloading firmware from file '%s'\n", + KBUILD_MODNAME, fw_file); + + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; + + fw_params[0] = checksum >> 8; + fw_params[1] = checksum & 0xff; + fw_params[2] = fw->size >> 8; + fw_params[3] = fw->size & 0xff; + + /* write fw checksum & size */ + ret = af9013_write_ofsm_regs(state, 0x50fc, + fw_params, sizeof(fw_params)); + if (ret) + goto err_release; + + #define FW_ADDR 0x5100 /* firmware start address */ + #define LEN_MAX 16 /* max packet size */ + for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { + len = remaining; + if (len > LEN_MAX) + len = LEN_MAX; + + ret = af9013_write_ofsm_regs(state, + FW_ADDR + fw->size - remaining, + (u8 *) &fw->data[fw->size - remaining], len); + if (ret) { + dev_err(&state->i2c->dev, + "%s: firmware download failed=%d\n", + KBUILD_MODNAME, ret); + goto err_release; + } + } + + /* request boot firmware */ + ret = af9013_wr_reg(state, 0xe205, 1); + if (ret) + goto err_release; + + for (i = 0; i < 15; i++) { + msleep(100); + + /* check firmware status */ + ret = af9013_rd_reg(state, 0x98be, &val); + if (ret) + goto err_release; + + dev_dbg(&state->i2c->dev, "%s: firmware status=%02x\n", + __func__, val); + + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + dev_err(&state->i2c->dev, "%s: firmware did not run\n", + KBUILD_MODNAME); + ret = -ENODEV; + } else if (val != 0x0c) { + dev_err(&state->i2c->dev, "%s: firmware boot timeout\n", + KBUILD_MODNAME); + ret = -ENODEV; + } + +err_release: + release_firmware(fw); +err: +exit: + if (!ret) + dev_info(&state->i2c->dev, "%s: found a '%s' in warm state\n", + KBUILD_MODNAME, af9013_ops.info.name); + return ret; +} + +struct dvb_frontend *af9013_attach(const struct af9013_config *config, + struct i2c_adapter *i2c) +{ + int ret; + struct af9013_state *state = NULL; + u8 buf[4], i; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL); + if (state == NULL) + goto err; + + /* setup the state */ + state->i2c = i2c; + memcpy(&state->config, config, sizeof(struct af9013_config)); + + /* download firmware */ + if (state->config.ts_mode != AF9013_TS_USB) { + ret = af9013_download_firmware(state); + if (ret) + goto err; + } + + /* firmware version */ + ret = af9013_rd_regs(state, 0x5103, buf, 4); + if (ret) + goto err; + + dev_info(&state->i2c->dev, "%s: firmware version %d.%d.%d.%d\n", + KBUILD_MODNAME, buf[0], buf[1], buf[2], buf[3]); + + /* set GPIOs */ + for (i = 0; i < sizeof(state->config.gpio); i++) { + ret = af9013_set_gpio(state, i, state->config.gpio[i]); + if (ret) + goto err; + } + + /* create dvb_frontend */ + memcpy(&state->fe.ops, &af9013_ops, + sizeof(struct dvb_frontend_ops)); + state->fe.demodulator_priv = state; + + INIT_DELAYED_WORK(&state->statistics_work, af9013_statistics_work); + + return &state->fe; +err: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(af9013_attach); + +static struct dvb_frontend_ops af9013_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Afatech AF9013", + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 250000, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = af9013_release, + + .init = af9013_init, + .sleep = af9013_sleep, + + .get_tune_settings = af9013_get_tune_settings, + .set_frontend = af9013_set_frontend, + .get_frontend = af9013_get_frontend, + + .read_status = af9013_read_status, + .read_snr = af9013_read_snr, + .read_signal_strength = af9013_read_signal_strength, + .read_ber = af9013_read_ber, + .read_ucblocks = af9013_read_ucblocks, + + .i2c_gate_ctrl = af9013_i2c_gate_ctrl, +}; + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(AF9013_FIRMWARE); diff --git a/drivers/media/dvb-frontends/af9013.h b/drivers/media/dvb-frontends/af9013.h new file mode 100644 index 00000000..09273b2c --- /dev/null +++ b/drivers/media/dvb-frontends/af9013.h @@ -0,0 +1,118 @@ +/* + * Afatech AF9013 demodulator driver + * + * Copyright (C) 2007 Antti Palosaari + * Copyright (C) 2011 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef AF9013_H +#define AF9013_H + +#include +#include + +/* AF9013/5 GPIOs (mostly guessed) + demod#1-gpio#0 - set demod#2 i2c-addr for dual devices + demod#1-gpio#1 - xtal setting (?) + demod#1-gpio#3 - tuner#1 + demod#2-gpio#0 - tuner#2 + demod#2-gpio#1 - xtal setting (?) +*/ + +struct af9013_config { + /* + * I2C address + */ + u8 i2c_addr; + + /* + * clock + * 20480000, 25000000, 28000000, 28800000 + */ + u32 clock; + + /* + * tuner + */ +#define AF9013_TUNER_MXL5003D 3 /* MaxLinear */ +#define AF9013_TUNER_MXL5005D 13 /* MaxLinear */ +#define AF9013_TUNER_MXL5005R 30 /* MaxLinear */ +#define AF9013_TUNER_ENV77H11D5 129 /* Panasonic */ +#define AF9013_TUNER_MT2060 130 /* Microtune */ +#define AF9013_TUNER_MC44S803 133 /* Freescale */ +#define AF9013_TUNER_QT1010 134 /* Quantek */ +#define AF9013_TUNER_UNKNOWN 140 /* for can tuners ? */ +#define AF9013_TUNER_MT2060_2 147 /* Microtune */ +#define AF9013_TUNER_TDA18271 156 /* NXP */ +#define AF9013_TUNER_QT1010A 162 /* Quantek */ +#define AF9013_TUNER_MXL5007T 177 /* MaxLinear */ +#define AF9013_TUNER_TDA18218 179 /* NXP */ + u8 tuner; + + /* + * IF frequency + */ + u32 if_frequency; + + /* + * TS settings + */ +#define AF9013_TS_USB 0 +#define AF9013_TS_PARALLEL 1 +#define AF9013_TS_SERIAL 2 + u8 ts_mode:2; + + /* + * input spectrum inversion + */ + bool spec_inv; + + /* + * firmware API version + */ + u8 api_version[4]; + + /* + * GPIOs + */ +#define AF9013_GPIO_ON (1 << 0) +#define AF9013_GPIO_EN (1 << 1) +#define AF9013_GPIO_O (1 << 2) +#define AF9013_GPIO_I (1 << 3) +#define AF9013_GPIO_LO (AF9013_GPIO_ON|AF9013_GPIO_EN) +#define AF9013_GPIO_HI (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O) +#define AF9013_GPIO_TUNER_ON (AF9013_GPIO_ON|AF9013_GPIO_EN) +#define AF9013_GPIO_TUNER_OFF (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O) + u8 gpio[4]; +}; + +#if IS_ENABLED(CONFIG_DVB_AF9013) +extern struct dvb_frontend *af9013_attach(const struct af9013_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *af9013_attach( +const struct af9013_config *config, struct i2c_adapter *i2c) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_AF9013 */ + +#endif /* AF9013_H */ diff --git a/drivers/media/dvb-frontends/af9013_priv.h b/drivers/media/dvb-frontends/af9013_priv.h new file mode 100644 index 00000000..8b9392cf --- /dev/null +++ b/drivers/media/dvb-frontends/af9013_priv.h @@ -0,0 +1,909 @@ +/* + * Afatech AF9013 demodulator driver + * + * Copyright (C) 2007 Antti Palosaari + * Copyright (C) 2011 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef AF9013_PRIV_H +#define AF9013_PRIV_H + +#include "dvb_frontend.h" +#include "af9013.h" +#include + +#define AF9013_FIRMWARE "dvb-fe-af9013.fw" + +struct af9013_reg_bit { + u16 addr; + u8 pos:4; + u8 len:4; + u8 val; +}; + +struct af9013_snr { + u32 val; + u8 snr; +}; + +struct af9013_coeff { + u32 clock; + u32 bandwidth_hz; + u8 val[24]; +}; + +/* pre-calculated coeff lookup table */ +static const struct af9013_coeff coeff_lut[] = { + /* 28.800 MHz */ + { 28800000, 8000000, { 0x02, 0x8a, 0x28, 0xa3, 0x05, 0x14, + 0x51, 0x11, 0x00, 0xa2, 0x8f, 0x3d, 0x00, 0xa2, 0x8a, + 0x29, 0x00, 0xa2, 0x85, 0x14, 0x01, 0x45, 0x14, 0x14 } }, + { 28800000, 7000000, { 0x02, 0x38, 0xe3, 0x8e, 0x04, 0x71, + 0xc7, 0x07, 0x00, 0x8e, 0x3d, 0x55, 0x00, 0x8e, 0x38, + 0xe4, 0x00, 0x8e, 0x34, 0x72, 0x01, 0x1c, 0x71, 0x32 } }, + { 28800000, 6000000, { 0x01, 0xe7, 0x9e, 0x7a, 0x03, 0xcf, + 0x3c, 0x3d, 0x00, 0x79, 0xeb, 0x6e, 0x00, 0x79, 0xe7, + 0x9e, 0x00, 0x79, 0xe3, 0xcf, 0x00, 0xf3, 0xcf, 0x0f } }, + /* 20.480 MHz */ + { 20480000, 8000000, { 0x03, 0x92, 0x49, 0x26, 0x07, 0x24, + 0x92, 0x13, 0x00, 0xe4, 0x99, 0x6e, 0x00, 0xe4, 0x92, + 0x49, 0x00, 0xe4, 0x8b, 0x25, 0x01, 0xc9, 0x24, 0x25 } }, + { 20480000, 7000000, { 0x03, 0x20, 0x00, 0x01, 0x06, 0x40, + 0x00, 0x00, 0x00, 0xc8, 0x06, 0x40, 0x00, 0xc8, 0x00, + 0x00, 0x00, 0xc7, 0xf9, 0xc0, 0x01, 0x90, 0x00, 0x00 } }, + { 20480000, 6000000, { 0x02, 0xad, 0xb6, 0xdc, 0x05, 0x5b, + 0x6d, 0x2e, 0x00, 0xab, 0x73, 0x13, 0x00, 0xab, 0x6d, + 0xb7, 0x00, 0xab, 0x68, 0x5c, 0x01, 0x56, 0xdb, 0x1c } }, + /* 28.000 MHz */ + { 28000000, 8000000, { 0x02, 0x9c, 0xbc, 0x15, 0x05, 0x39, + 0x78, 0x0a, 0x00, 0xa7, 0x34, 0x3f, 0x00, 0xa7, 0x2f, + 0x05, 0x00, 0xa7, 0x29, 0xcc, 0x01, 0x4e, 0x5e, 0x03 } }, + { 28000000, 7000000, { 0x02, 0x49, 0x24, 0x92, 0x04, 0x92, + 0x49, 0x09, 0x00, 0x92, 0x4d, 0xb7, 0x00, 0x92, 0x49, + 0x25, 0x00, 0x92, 0x44, 0x92, 0x01, 0x24, 0x92, 0x12 } }, + { 28000000, 6000000, { 0x01, 0xf5, 0x8d, 0x10, 0x03, 0xeb, + 0x1a, 0x08, 0x00, 0x7d, 0x67, 0x2f, 0x00, 0x7d, 0x63, + 0x44, 0x00, 0x7d, 0x5f, 0x59, 0x00, 0xfa, 0xc6, 0x22 } }, + /* 25.000 MHz */ + { 25000000, 8000000, { 0x02, 0xec, 0xfb, 0x9d, 0x05, 0xd9, + 0xf7, 0x0e, 0x00, 0xbb, 0x44, 0xc1, 0x00, 0xbb, 0x3e, + 0xe7, 0x00, 0xbb, 0x39, 0x0d, 0x01, 0x76, 0x7d, 0x34 } }, + { 25000000, 7000000, { 0x02, 0x8f, 0x5c, 0x29, 0x05, 0x1e, + 0xb8, 0x14, 0x00, 0xa3, 0xdc, 0x29, 0x00, 0xa3, 0xd7, + 0x0a, 0x00, 0xa3, 0xd1, 0xec, 0x01, 0x47, 0xae, 0x05 } }, + { 25000000, 6000000, { 0x02, 0x31, 0xbc, 0xb5, 0x04, 0x63, + 0x79, 0x1b, 0x00, 0x8c, 0x73, 0x91, 0x00, 0x8c, 0x6f, + 0x2d, 0x00, 0x8c, 0x6a, 0xca, 0x01, 0x18, 0xde, 0x17 } }, +}; + +/* QPSK SNR lookup table */ +static const struct af9013_snr qpsk_snr_lut[] = { + { 0x000000, 0 }, + { 0x0b4771, 0 }, + { 0x0c1aed, 1 }, + { 0x0d0d27, 2 }, + { 0x0e4d19, 3 }, + { 0x0e5da8, 4 }, + { 0x107097, 5 }, + { 0x116975, 6 }, + { 0x1252d9, 7 }, + { 0x131fa4, 8 }, + { 0x13d5e1, 9 }, + { 0x148e53, 10 }, + { 0x15358b, 11 }, + { 0x15dd29, 12 }, + { 0x168112, 13 }, + { 0x170b61, 14 }, + { 0xffffff, 15 }, +}; + +/* QAM16 SNR lookup table */ +static const struct af9013_snr qam16_snr_lut[] = { + { 0x000000, 0 }, + { 0x05eb62, 5 }, + { 0x05fecf, 6 }, + { 0x060b80, 7 }, + { 0x062501, 8 }, + { 0x064865, 9 }, + { 0x069604, 10 }, + { 0x06f356, 11 }, + { 0x07706a, 12 }, + { 0x0804d3, 13 }, + { 0x089d1a, 14 }, + { 0x093e3d, 15 }, + { 0x09e35d, 16 }, + { 0x0a7c3c, 17 }, + { 0x0afaf8, 18 }, + { 0x0b719d, 19 }, + { 0xffffff, 20 }, +}; + +/* QAM64 SNR lookup table */ +static const struct af9013_snr qam64_snr_lut[] = { + { 0x000000, 0 }, + { 0x03109b, 12 }, + { 0x0310d4, 13 }, + { 0x031920, 14 }, + { 0x0322d0, 15 }, + { 0x0339fc, 16 }, + { 0x0364a1, 17 }, + { 0x038bcc, 18 }, + { 0x03c7d3, 19 }, + { 0x0408cc, 20 }, + { 0x043bed, 21 }, + { 0x048061, 22 }, + { 0x04be95, 23 }, + { 0x04fa7d, 24 }, + { 0x052405, 25 }, + { 0x05570d, 26 }, + { 0xffffff, 27 }, +}; + +static const struct af9013_reg_bit ofsm_init[] = { + { 0xd73a, 0, 8, 0xa1 }, + { 0xd73b, 0, 8, 0x1f }, + { 0xd73c, 4, 4, 0x0a }, + { 0xd732, 3, 1, 0x00 }, + { 0xd731, 4, 2, 0x03 }, + { 0xd73d, 7, 1, 0x01 }, + { 0xd740, 0, 1, 0x00 }, + { 0xd740, 1, 1, 0x00 }, + { 0xd740, 2, 1, 0x00 }, + { 0xd740, 3, 1, 0x01 }, + { 0xd3c1, 4, 1, 0x01 }, + { 0x9124, 0, 8, 0x58 }, + { 0x9125, 0, 2, 0x02 }, + { 0xd3a2, 0, 8, 0x00 }, + { 0xd3a3, 0, 8, 0x04 }, + { 0xd305, 0, 8, 0x32 }, + { 0xd306, 0, 8, 0x10 }, + { 0xd304, 0, 8, 0x04 }, + { 0x9112, 0, 1, 0x01 }, + { 0x911d, 0, 1, 0x01 }, + { 0x911a, 0, 1, 0x01 }, + { 0x911b, 0, 1, 0x01 }, + { 0x9bce, 0, 4, 0x02 }, + { 0x9116, 0, 1, 0x01 }, + { 0x9122, 0, 8, 0xd0 }, + { 0xd2e0, 0, 8, 0xd0 }, + { 0xd2e9, 0, 4, 0x0d }, + { 0xd38c, 0, 8, 0xfc }, + { 0xd38d, 0, 8, 0x00 }, + { 0xd38e, 0, 8, 0x7e }, + { 0xd38f, 0, 8, 0x00 }, + { 0xd390, 0, 8, 0x2f }, + { 0xd145, 4, 1, 0x01 }, + { 0xd1a9, 4, 1, 0x01 }, + { 0xd158, 5, 3, 0x01 }, + { 0xd159, 0, 6, 0x06 }, + { 0xd167, 0, 8, 0x00 }, + { 0xd168, 0, 4, 0x07 }, + { 0xd1c3, 5, 3, 0x00 }, + { 0xd1c4, 0, 6, 0x00 }, + { 0xd1c5, 0, 7, 0x10 }, + { 0xd1c6, 0, 3, 0x02 }, + { 0xd080, 2, 5, 0x03 }, + { 0xd081, 4, 4, 0x09 }, + { 0xd098, 4, 4, 0x0f }, + { 0xd098, 0, 4, 0x03 }, + { 0xdbc0, 4, 1, 0x01 }, + { 0xdbc7, 0, 8, 0x08 }, + { 0xdbc8, 4, 4, 0x00 }, + { 0xdbc9, 0, 5, 0x01 }, + { 0xd280, 0, 8, 0xe0 }, + { 0xd281, 0, 8, 0xff }, + { 0xd282, 0, 8, 0xff }, + { 0xd283, 0, 8, 0xc3 }, + { 0xd284, 0, 8, 0xff }, + { 0xd285, 0, 4, 0x01 }, + { 0xd0f0, 0, 7, 0x1a }, + { 0xd0f1, 4, 1, 0x01 }, + { 0xd0f2, 0, 8, 0x0c }, + { 0xd101, 5, 3, 0x06 }, + { 0xd103, 0, 4, 0x08 }, + { 0xd0f8, 0, 7, 0x20 }, + { 0xd111, 5, 1, 0x00 }, + { 0xd111, 6, 1, 0x00 }, + { 0x910b, 0, 8, 0x0a }, + { 0x9115, 0, 8, 0x02 }, + { 0x910c, 0, 8, 0x02 }, + { 0x910d, 0, 8, 0x08 }, + { 0x910e, 0, 8, 0x0a }, + { 0x9bf6, 0, 8, 0x06 }, + { 0x9bf8, 0, 8, 0x02 }, + { 0x9bf7, 0, 8, 0x05 }, + { 0x9bf9, 0, 8, 0x0f }, + { 0x9bfc, 0, 8, 0x13 }, + { 0x9bd3, 0, 8, 0xff }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, +}; + +/* Panasonic ENV77H11D5 tuner init + AF9013_TUNER_ENV77H11D5 = 129 */ +static const struct af9013_reg_bit tuner_init_env77h11d5[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x03 }, + { 0x9bbe, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0xd015, 0, 8, 0x50 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0xeb }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf4 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0xeb }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0x52 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* Microtune MT2060 tuner init + AF9013_TUNER_MT2060 = 130 */ +static const struct af9013_reg_bit tuner_init_mt2060[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x07 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bbe, 0, 1, 0x00 }, + { 0x9bcc, 0, 1, 0x00 }, + { 0x9bb9, 0, 8, 0x75 }, + { 0x9bcd, 0, 8, 0x24 }, + { 0x9bff, 0, 8, 0x30 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x32 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x36 }, + { 0xd00d, 0, 2, 0x03 }, + { 0xd00a, 0, 8, 0x35 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x90 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x36 }, + { 0x9bc6, 0, 8, 0x03 }, + { 0x9bba, 0, 8, 0xc9 }, + { 0x9bc9, 0, 8, 0x79 }, + { 0xd011, 0, 8, 0x10 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0x45 }, + { 0xd014, 0, 2, 0x03 }, + { 0xd040, 0, 8, 0x98 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0xcf }, + { 0xd043, 0, 2, 0x03 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xcc }, + { 0x9be4, 0, 8, 0xa0 }, + { 0x9bbd, 0, 8, 0x8e }, + { 0x9be2, 0, 8, 0x4d }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Microtune MT2060 tuner init + AF9013_TUNER_MT2060_2 = 147 */ +static const struct af9013_reg_bit tuner_init_mt2060_2[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x06 }, + { 0x9bbe, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x32 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x36 }, + { 0xd00d, 0, 2, 0x03 }, + { 0xd00a, 0, 8, 0x35 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x90 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x36 }, + { 0x9bc6, 0, 8, 0x03 }, + { 0x9bba, 0, 8, 0xc9 }, + { 0x9bc9, 0, 8, 0x79 }, + { 0xd011, 0, 8, 0x10 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0x45 }, + { 0xd014, 0, 2, 0x03 }, + { 0xd040, 0, 8, 0x98 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0xcf }, + { 0xd043, 0, 2, 0x03 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 8, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x96 }, + { 0xd054, 0, 8, 0x46 }, + { 0xd045, 7, 1, 0x00 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* MaxLinear MXL5003 tuner init + AF9013_TUNER_MXL5003D = 3 */ +static const struct af9013_reg_bit tuner_init_mxl5003d[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x09 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bfc, 0, 8, 0x0f }, + { 0x9bf6, 0, 8, 0x01 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0xd015, 0, 8, 0x33 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x40 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x6c }, + { 0xd007, 0, 2, 0x00 }, + { 0xd00c, 0, 8, 0x3d }, + { 0xd00d, 0, 2, 0x00 }, + { 0xd00a, 0, 8, 0x45 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x52 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x3d }, + { 0x9bc6, 0, 8, 0x00 }, + { 0x9bba, 0, 8, 0xa2 }, + { 0x9bc9, 0, 8, 0xa0 }, + { 0xd011, 0, 8, 0x56 }, + { 0xd012, 0, 2, 0x00 }, + { 0xd013, 0, 8, 0x50 }, + { 0xd014, 0, 2, 0x00 }, + { 0xd040, 0, 8, 0x56 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0x50 }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 8, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* MaxLinear MXL5005S & MXL5007T tuner init + AF9013_TUNER_MXL5005D = 13 + AF9013_TUNER_MXL5005R = 30 + AF9013_TUNER_MXL5007T = 177 */ +static const struct af9013_reg_bit tuner_init_mxl5005[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x07 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x28 }, + { 0x9bff, 0, 8, 0x24 }, + { 0xd015, 0, 8, 0x40 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x40 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x73 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0xfa }, + { 0xd00d, 0, 2, 0x01 }, + { 0xd00a, 0, 8, 0xff }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x23 }, + { 0x9bc8, 0, 8, 0x55 }, + { 0x9bc3, 0, 8, 0x01 }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0xfa }, + { 0x9bc6, 0, 8, 0x01 }, + { 0x9bba, 0, 8, 0xff }, + { 0x9bc9, 0, 8, 0xff }, + { 0x9bd3, 0, 8, 0x95 }, + { 0xd011, 0, 8, 0x70 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xfb }, + { 0xd014, 0, 2, 0x01 }, + { 0xd040, 0, 8, 0x70 }, + { 0xd041, 0, 2, 0x01 }, + { 0xd042, 0, 8, 0xfb }, + { 0xd043, 0, 2, 0x01 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0x93 }, + { 0x9be4, 0, 8, 0xfe }, + { 0x9bbd, 0, 8, 0x63 }, + { 0x9be2, 0, 8, 0xfe }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Quantek QT1010 tuner init + AF9013_TUNER_QT1010 = 134 + AF9013_TUNER_QT1010A = 162 */ +static const struct af9013_reg_bit tuner_init_qt1010[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x09 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x28 }, + { 0x9bff, 0, 8, 0x20 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x99 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x0f }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0x50 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x00 }, + { 0x9bc8, 0, 8, 0x00 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x0f }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bba, 0, 8, 0xc5 }, + { 0x9bc9, 0, 8, 0xff }, + { 0xd011, 0, 8, 0x58 }, + { 0xd012, 0, 2, 0x02 }, + { 0xd013, 0, 8, 0x89 }, + { 0xd014, 0, 2, 0x01 }, + { 0xd040, 0, 8, 0x58 }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x89 }, + { 0xd043, 0, 2, 0x01 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xcd }, + { 0x9be4, 0, 8, 0xbb }, + { 0x9bbd, 0, 8, 0x93 }, + { 0x9be2, 0, 8, 0x80 }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Freescale MC44S803 tuner init + AF9013_TUNER_MC44S803 = 133 */ +static const struct af9013_reg_bit tuner_init_mc44s803[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x06 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bf6, 0, 8, 0x01 }, + { 0x9bf8, 0, 8, 0x02 }, + { 0x9bf9, 0, 8, 0x02 }, + { 0x9bfc, 0, 8, 0x1f }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x24 }, + { 0x9bff, 0, 8, 0x24 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x01 }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x7b }, + { 0xd007, 0, 2, 0x00 }, + { 0xd00c, 0, 8, 0x7c }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xfe }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x08 }, + { 0x9bc8, 0, 8, 0x9a }, + { 0x9bc3, 0, 8, 0x01 }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x7c }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bba, 0, 8, 0xfc }, + { 0x9bc9, 0, 8, 0xaa }, + { 0xd011, 0, 8, 0x6b }, + { 0xd012, 0, 2, 0x00 }, + { 0xd013, 0, 8, 0x88 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x6b }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0x7c }, + { 0xd043, 0, 2, 0x02 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0x9e }, + { 0x9be4, 0, 8, 0xff }, + { 0x9bbd, 0, 8, 0x9e }, + { 0x9be2, 0, 8, 0x25 }, + { 0x9bee, 0, 1, 0x01 }, + { 0xd73b, 3, 1, 0x00 }, +}; + +/* unknown, probably for tin can tuner, tuner init + AF9013_TUNER_UNKNOWN = 140 */ +static const struct af9013_reg_bit tuner_init_unknown[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x02 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x18 }, + { 0x9bff, 0, 8, 0x2c }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x00 }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf6 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc8, 0, 8, 0xaa }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x00 }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0xf0 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* NXP TDA18271 & TDA18218 tuner init + AF9013_TUNER_TDA18271 = 156 + AF9013_TUNER_TDA18218 = 179 */ +static const struct af9013_reg_bit tuner_init_tda18271[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x04 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x18 }, + { 0x9bff, 0, 8, 0x2c }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x00 }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf6 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc8, 0, 8, 0xaa }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x00 }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0xf0 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xa8 }, + { 0x9be4, 0, 8, 0x7f }, + { 0x9bbd, 0, 8, 0xa8 }, + { 0x9be2, 0, 8, 0x20 }, + { 0x9bee, 0, 1, 0x01 }, +}; + +#endif /* AF9013_PRIV_H */ diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c new file mode 100644 index 00000000..65728c25 --- /dev/null +++ b/drivers/media/dvb-frontends/af9033.c @@ -0,0 +1,1123 @@ +/* + * Afatech AF9033 demodulator driver + * + * Copyright (C) 2009 Antti Palosaari + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "af9033_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +struct af9033_state { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct af9033_config cfg; + + u32 bandwidth_hz; + bool ts_mode_parallel; + bool ts_mode_serial; + + u32 ber; + u32 ucb; + unsigned long last_stat_check; +}; + +/* write multiple registers */ +static int af9033_wr_regs(struct af9033_state *state, u32 reg, const u8 *val, + int len) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg[1] = { + { + .addr = state->cfg.i2c_addr, + .flags = 0, + .len = 3 + len, + .buf = buf, + } + }; + + if (3 + len > sizeof(buf)) { + dev_warn(&state->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + buf[0] = (reg >> 16) & 0xff; + buf[1] = (reg >> 8) & 0xff; + buf[2] = (reg >> 0) & 0xff; + memcpy(&buf[3], val, len); + + ret = i2c_transfer(state->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%06x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + + return ret; +} + +/* read multiple registers */ +static int af9033_rd_regs(struct af9033_state *state, u32 reg, u8 *val, int len) +{ + int ret; + u8 buf[3] = { (reg >> 16) & 0xff, (reg >> 8) & 0xff, + (reg >> 0) & 0xff }; + struct i2c_msg msg[2] = { + { + .addr = state->cfg.i2c_addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf + }, { + .addr = state->cfg.i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = val + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%06x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + + return ret; +} + + +/* write single register */ +static int af9033_wr_reg(struct af9033_state *state, u32 reg, u8 val) +{ + return af9033_wr_regs(state, reg, &val, 1); +} + +/* read single register */ +static int af9033_rd_reg(struct af9033_state *state, u32 reg, u8 *val) +{ + return af9033_rd_regs(state, reg, val, 1); +} + +/* write single register with mask */ +static int af9033_wr_reg_mask(struct af9033_state *state, u32 reg, u8 val, + u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = af9033_rd_regs(state, reg, &tmp, 1); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return af9033_wr_regs(state, reg, &val, 1); +} + +/* read single register with mask */ +static int af9033_rd_reg_mask(struct af9033_state *state, u32 reg, u8 *val, + u8 mask) +{ + int ret, i; + u8 tmp; + + ret = af9033_rd_regs(state, reg, &tmp, 1); + if (ret) + return ret; + + tmp &= mask; + + /* find position of the first bit */ + for (i = 0; i < 8; i++) { + if ((mask >> i) & 0x01) + break; + } + *val = tmp >> i; + + return 0; +} + +/* write reg val table using reg addr auto increment */ +static int af9033_wr_reg_val_tab(struct af9033_state *state, + const struct reg_val *tab, int tab_len) +{ +#define MAX_TAB_LEN 212 + int ret, i, j; + u8 buf[1 + MAX_TAB_LEN]; + + dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len); + + if (tab_len > sizeof(buf)) { + dev_warn(&state->i2c->dev, "%s: tab len %d is too big\n", + KBUILD_MODNAME, tab_len); + return -EINVAL; + } + + for (i = 0, j = 0; i < tab_len; i++) { + buf[j] = tab[i].val; + + if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1) { + ret = af9033_wr_regs(state, tab[i].reg - j, buf, j + 1); + if (ret < 0) + goto err; + + j = 0; + } else { + j++; + } + } + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static u32 af9033_div(struct af9033_state *state, u32 a, u32 b, u32 x) +{ + u32 r = 0, c = 0, i; + + dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d\n", __func__, a, b, x); + + if (a > b) { + c = a / b; + a = a - c * b; + } + + for (i = 0; i < x; i++) { + if (a >= b) { + r += 1; + a -= b; + } + a <<= 1; + r <<= 1; + } + r = (c << (u32)x) + r; + + dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d r=%d r=%x\n", + __func__, a, b, x, r, r); + + return r; +} + +static void af9033_release(struct dvb_frontend *fe) +{ + struct af9033_state *state = fe->demodulator_priv; + + kfree(state); +} + +static int af9033_init(struct dvb_frontend *fe) +{ + struct af9033_state *state = fe->demodulator_priv; + int ret, i, len; + const struct reg_val *init; + u8 buf[4]; + u32 adc_cw, clock_cw; + struct reg_val_mask tab[] = { + { 0x80fb24, 0x00, 0x08 }, + { 0x80004c, 0x00, 0xff }, + { 0x00f641, state->cfg.tuner, 0xff }, + { 0x80f5ca, 0x01, 0x01 }, + { 0x80f715, 0x01, 0x01 }, + { 0x00f41f, 0x04, 0x04 }, + { 0x00f41a, 0x01, 0x01 }, + { 0x80f731, 0x00, 0x01 }, + { 0x00d91e, 0x00, 0x01 }, + { 0x00d919, 0x00, 0x01 }, + { 0x80f732, 0x00, 0x01 }, + { 0x00d91f, 0x00, 0x01 }, + { 0x00d91a, 0x00, 0x01 }, + { 0x80f730, 0x00, 0x01 }, + { 0x80f778, 0x00, 0xff }, + { 0x80f73c, 0x01, 0x01 }, + { 0x80f776, 0x00, 0x01 }, + { 0x00d8fd, 0x01, 0xff }, + { 0x00d830, 0x01, 0xff }, + { 0x00d831, 0x00, 0xff }, + { 0x00d832, 0x00, 0xff }, + { 0x80f985, state->ts_mode_serial, 0x01 }, + { 0x80f986, state->ts_mode_parallel, 0x01 }, + { 0x00d827, 0x00, 0xff }, + { 0x00d829, 0x00, 0xff }, + { 0x800045, state->cfg.adc_multiplier, 0xff }, + }; + + /* program clock control */ + clock_cw = af9033_div(state, state->cfg.clock, 1000000ul, 19ul); + buf[0] = (clock_cw >> 0) & 0xff; + buf[1] = (clock_cw >> 8) & 0xff; + buf[2] = (clock_cw >> 16) & 0xff; + buf[3] = (clock_cw >> 24) & 0xff; + + dev_dbg(&state->i2c->dev, "%s: clock=%d clock_cw=%08x\n", + __func__, state->cfg.clock, clock_cw); + + ret = af9033_wr_regs(state, 0x800025, buf, 4); + if (ret < 0) + goto err; + + /* program ADC control */ + for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) { + if (clock_adc_lut[i].clock == state->cfg.clock) + break; + } + + adc_cw = af9033_div(state, clock_adc_lut[i].adc, 1000000ul, 19ul); + buf[0] = (adc_cw >> 0) & 0xff; + buf[1] = (adc_cw >> 8) & 0xff; + buf[2] = (adc_cw >> 16) & 0xff; + + dev_dbg(&state->i2c->dev, "%s: adc=%d adc_cw=%06x\n", + __func__, clock_adc_lut[i].adc, adc_cw); + + ret = af9033_wr_regs(state, 0x80f1cd, buf, 3); + if (ret < 0) + goto err; + + /* program register table */ + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = af9033_wr_reg_mask(state, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret < 0) + goto err; + } + + /* settings for TS interface */ + if (state->cfg.ts_mode == AF9033_TS_MODE_USB) { + ret = af9033_wr_reg_mask(state, 0x80f9a5, 0x00, 0x01); + if (ret < 0) + goto err; + + ret = af9033_wr_reg_mask(state, 0x80f9b5, 0x01, 0x01); + if (ret < 0) + goto err; + } else { + ret = af9033_wr_reg_mask(state, 0x80f990, 0x00, 0x01); + if (ret < 0) + goto err; + + ret = af9033_wr_reg_mask(state, 0x80f9b5, 0x00, 0x01); + if (ret < 0) + goto err; + } + + /* load OFSM settings */ + dev_dbg(&state->i2c->dev, "%s: load ofsm settings\n", __func__); + switch (state->cfg.tuner) { + case AF9033_TUNER_IT9135_38: + case AF9033_TUNER_IT9135_51: + case AF9033_TUNER_IT9135_52: + len = ARRAY_SIZE(ofsm_init_it9135_v1); + init = ofsm_init_it9135_v1; + break; + case AF9033_TUNER_IT9135_60: + case AF9033_TUNER_IT9135_61: + case AF9033_TUNER_IT9135_62: + len = ARRAY_SIZE(ofsm_init_it9135_v2); + init = ofsm_init_it9135_v2; + break; + default: + len = ARRAY_SIZE(ofsm_init); + init = ofsm_init; + break; + } + + ret = af9033_wr_reg_val_tab(state, init, len); + if (ret < 0) + goto err; + + /* load tuner specific settings */ + dev_dbg(&state->i2c->dev, "%s: load tuner specific settings\n", + __func__); + switch (state->cfg.tuner) { + case AF9033_TUNER_TUA9001: + len = ARRAY_SIZE(tuner_init_tua9001); + init = tuner_init_tua9001; + break; + case AF9033_TUNER_FC0011: + len = ARRAY_SIZE(tuner_init_fc0011); + init = tuner_init_fc0011; + break; + case AF9033_TUNER_MXL5007T: + len = ARRAY_SIZE(tuner_init_mxl5007t); + init = tuner_init_mxl5007t; + break; + case AF9033_TUNER_TDA18218: + len = ARRAY_SIZE(tuner_init_tda18218); + init = tuner_init_tda18218; + break; + case AF9033_TUNER_FC2580: + len = ARRAY_SIZE(tuner_init_fc2580); + init = tuner_init_fc2580; + break; + case AF9033_TUNER_FC0012: + len = ARRAY_SIZE(tuner_init_fc0012); + init = tuner_init_fc0012; + break; + case AF9033_TUNER_IT9135_38: + len = ARRAY_SIZE(tuner_init_it9135_38); + init = tuner_init_it9135_38; + break; + case AF9033_TUNER_IT9135_51: + len = ARRAY_SIZE(tuner_init_it9135_51); + init = tuner_init_it9135_51; + break; + case AF9033_TUNER_IT9135_52: + len = ARRAY_SIZE(tuner_init_it9135_52); + init = tuner_init_it9135_52; + break; + case AF9033_TUNER_IT9135_60: + len = ARRAY_SIZE(tuner_init_it9135_60); + init = tuner_init_it9135_60; + break; + case AF9033_TUNER_IT9135_61: + len = ARRAY_SIZE(tuner_init_it9135_61); + init = tuner_init_it9135_61; + break; + case AF9033_TUNER_IT9135_62: + len = ARRAY_SIZE(tuner_init_it9135_62); + init = tuner_init_it9135_62; + break; + default: + dev_dbg(&state->i2c->dev, "%s: unsupported tuner ID=%d\n", + __func__, state->cfg.tuner); + ret = -ENODEV; + goto err; + } + + ret = af9033_wr_reg_val_tab(state, init, len); + if (ret < 0) + goto err; + + if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) { + ret = af9033_wr_reg_mask(state, 0x00d91c, 0x01, 0x01); + if (ret < 0) + goto err; + + ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01); + if (ret < 0) + goto err; + + ret = af9033_wr_reg_mask(state, 0x00d916, 0x00, 0x01); + if (ret < 0) + goto err; + } + + switch (state->cfg.tuner) { + case AF9033_TUNER_IT9135_60: + case AF9033_TUNER_IT9135_61: + case AF9033_TUNER_IT9135_62: + ret = af9033_wr_reg(state, 0x800000, 0x01); + if (ret < 0) + goto err; + } + + state->bandwidth_hz = 0; /* force to program all parameters */ + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9033_sleep(struct dvb_frontend *fe) +{ + struct af9033_state *state = fe->demodulator_priv; + int ret, i; + u8 tmp; + + ret = af9033_wr_reg(state, 0x80004c, 1); + if (ret < 0) + goto err; + + ret = af9033_wr_reg(state, 0x800000, 0); + if (ret < 0) + goto err; + + for (i = 100, tmp = 1; i && tmp; i--) { + ret = af9033_rd_reg(state, 0x80004c, &tmp); + if (ret < 0) + goto err; + + usleep_range(200, 10000); + } + + dev_dbg(&state->i2c->dev, "%s: loop=%d\n", __func__, i); + + if (i == 0) { + ret = -ETIMEDOUT; + goto err; + } + + ret = af9033_wr_reg_mask(state, 0x80fb24, 0x08, 0x08); + if (ret < 0) + goto err; + + /* prevent current leak (?) */ + if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) { + /* enable parallel TS */ + ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01); + if (ret < 0) + goto err; + + ret = af9033_wr_reg_mask(state, 0x00d916, 0x01, 0x01); + if (ret < 0) + goto err; + } + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9033_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + /* 800 => 2000 because IT9135 v2 is slow to gain lock */ + fesettings->min_delay_ms = 2000; + fesettings->step_size = 0; + fesettings->max_drift = 0; + + return 0; +} + +static int af9033_set_frontend(struct dvb_frontend *fe) +{ + struct af9033_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i, spec_inv, sampling_freq; + u8 tmp, buf[3], bandwidth_reg_val; + u32 if_frequency, freq_cw, adc_freq; + + dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", + __func__, c->frequency, c->bandwidth_hz); + + /* check bandwidth */ + switch (c->bandwidth_hz) { + case 6000000: + bandwidth_reg_val = 0x00; + break; + case 7000000: + bandwidth_reg_val = 0x01; + break; + case 8000000: + bandwidth_reg_val = 0x02; + break; + default: + dev_dbg(&state->i2c->dev, "%s: invalid bandwidth_hz\n", + __func__); + ret = -EINVAL; + goto err; + } + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* program CFOE coefficients */ + if (c->bandwidth_hz != state->bandwidth_hz) { + for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) { + if (coeff_lut[i].clock == state->cfg.clock && + coeff_lut[i].bandwidth_hz == c->bandwidth_hz) { + break; + } + } + ret = af9033_wr_regs(state, 0x800001, + coeff_lut[i].val, sizeof(coeff_lut[i].val)); + } + + /* program frequency control */ + if (c->bandwidth_hz != state->bandwidth_hz) { + spec_inv = state->cfg.spec_inv ? -1 : 1; + + for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) { + if (clock_adc_lut[i].clock == state->cfg.clock) + break; + } + adc_freq = clock_adc_lut[i].adc; + + /* get used IF frequency */ + if (fe->ops.tuner_ops.get_if_frequency) + fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); + else + if_frequency = 0; + + sampling_freq = if_frequency; + + while (sampling_freq > (adc_freq / 2)) + sampling_freq -= adc_freq; + + if (sampling_freq >= 0) + spec_inv *= -1; + else + sampling_freq *= -1; + + freq_cw = af9033_div(state, sampling_freq, adc_freq, 23ul); + + if (spec_inv == -1) + freq_cw = 0x800000 - freq_cw; + + if (state->cfg.adc_multiplier == AF9033_ADC_MULTIPLIER_2X) + freq_cw /= 2; + + buf[0] = (freq_cw >> 0) & 0xff; + buf[1] = (freq_cw >> 8) & 0xff; + buf[2] = (freq_cw >> 16) & 0x7f; + + /* FIXME: there seems to be calculation error here... */ + if (if_frequency == 0) + buf[2] = 0; + + ret = af9033_wr_regs(state, 0x800029, buf, 3); + if (ret < 0) + goto err; + + state->bandwidth_hz = c->bandwidth_hz; + } + + ret = af9033_wr_reg_mask(state, 0x80f904, bandwidth_reg_val, 0x03); + if (ret < 0) + goto err; + + ret = af9033_wr_reg(state, 0x800040, 0x00); + if (ret < 0) + goto err; + + ret = af9033_wr_reg(state, 0x800047, 0x00); + if (ret < 0) + goto err; + + ret = af9033_wr_reg_mask(state, 0x80f999, 0x00, 0x01); + if (ret < 0) + goto err; + + if (c->frequency <= 230000000) + tmp = 0x00; /* VHF */ + else + tmp = 0x01; /* UHF */ + + ret = af9033_wr_reg(state, 0x80004b, tmp); + if (ret < 0) + goto err; + + ret = af9033_wr_reg(state, 0x800000, 0x00); + if (ret < 0) + goto err; + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9033_get_frontend(struct dvb_frontend *fe) +{ + struct af9033_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + u8 buf[8]; + + dev_dbg(&state->i2c->dev, "%s:\n", __func__); + + /* read all needed registers */ + ret = af9033_rd_regs(state, 0x80f900, buf, sizeof(buf)); + if (ret < 0) + goto err; + + switch ((buf[0] >> 0) & 3) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_8K; + break; + } + + switch ((buf[1] >> 0) & 3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[2] >> 0) & 7) { + case 0: + c->hierarchy = HIERARCHY_NONE; + break; + case 1: + c->hierarchy = HIERARCHY_1; + break; + case 2: + c->hierarchy = HIERARCHY_2; + break; + case 3: + c->hierarchy = HIERARCHY_4; + break; + } + + switch ((buf[3] >> 0) & 3) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + } + + switch ((buf[4] >> 0) & 3) { + case 0: + c->bandwidth_hz = 6000000; + break; + case 1: + c->bandwidth_hz = 7000000; + break; + case 2: + c->bandwidth_hz = 8000000; + break; + } + + switch ((buf[6] >> 0) & 7) { + case 0: + c->code_rate_HP = FEC_1_2; + break; + case 1: + c->code_rate_HP = FEC_2_3; + break; + case 2: + c->code_rate_HP = FEC_3_4; + break; + case 3: + c->code_rate_HP = FEC_5_6; + break; + case 4: + c->code_rate_HP = FEC_7_8; + break; + case 5: + c->code_rate_HP = FEC_NONE; + break; + } + + switch ((buf[7] >> 0) & 7) { + case 0: + c->code_rate_LP = FEC_1_2; + break; + case 1: + c->code_rate_LP = FEC_2_3; + break; + case 2: + c->code_rate_LP = FEC_3_4; + break; + case 3: + c->code_rate_LP = FEC_5_6; + break; + case 4: + c->code_rate_LP = FEC_7_8; + break; + case 5: + c->code_rate_LP = FEC_NONE; + break; + } + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9033_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct af9033_state *state = fe->demodulator_priv; + int ret; + u8 tmp; + + *status = 0; + + /* radio channel status, 0=no result, 1=has signal, 2=no signal */ + ret = af9033_rd_reg(state, 0x800047, &tmp); + if (ret < 0) + goto err; + + /* has signal */ + if (tmp == 0x01) + *status |= FE_HAS_SIGNAL; + + if (tmp != 0x02) { + /* TPS lock */ + ret = af9033_rd_reg_mask(state, 0x80f5a9, &tmp, 0x01); + if (ret < 0) + goto err; + + if (tmp) + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI; + + /* full lock */ + ret = af9033_rd_reg_mask(state, 0x80f999, &tmp, 0x01); + if (ret < 0) + goto err; + + if (tmp) + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | + FE_HAS_LOCK; + } + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9033_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct af9033_state *state = fe->demodulator_priv; + int ret, i, len; + u8 buf[3], tmp; + u32 snr_val; + const struct val_snr *uninitialized_var(snr_lut); + + /* read value */ + ret = af9033_rd_regs(state, 0x80002c, buf, 3); + if (ret < 0) + goto err; + + snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0]; + + /* read current modulation */ + ret = af9033_rd_reg(state, 0x80f903, &tmp); + if (ret < 0) + goto err; + + switch ((tmp >> 0) & 3) { + case 0: + len = ARRAY_SIZE(qpsk_snr_lut); + snr_lut = qpsk_snr_lut; + break; + case 1: + len = ARRAY_SIZE(qam16_snr_lut); + snr_lut = qam16_snr_lut; + break; + case 2: + len = ARRAY_SIZE(qam64_snr_lut); + snr_lut = qam64_snr_lut; + break; + default: + goto err; + } + + for (i = 0; i < len; i++) { + tmp = snr_lut[i].snr; + + if (snr_val < snr_lut[i].val) + break; + } + + *snr = tmp * 10; /* dB/10 */ + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9033_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct af9033_state *state = fe->demodulator_priv; + int ret; + u8 strength2; + + /* read signal strength of 0-100 scale */ + ret = af9033_rd_reg(state, 0x800048, &strength2); + if (ret < 0) + goto err; + + /* scale value to 0x0000-0xffff */ + *strength = strength2 * 0xffff / 100; + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9033_update_ch_stat(struct af9033_state *state) +{ + int ret = 0; + u32 err_cnt, bit_cnt; + u16 abort_cnt; + u8 buf[7]; + + /* only update data every half second */ + if (time_after(jiffies, state->last_stat_check + msecs_to_jiffies(500))) { + ret = af9033_rd_regs(state, 0x800032, buf, sizeof(buf)); + if (ret < 0) + goto err; + /* in 8 byte packets? */ + abort_cnt = (buf[1] << 8) + buf[0]; + /* in bits */ + err_cnt = (buf[4] << 16) + (buf[3] << 8) + buf[2]; + /* in 8 byte packets? always(?) 0x2710 = 10000 */ + bit_cnt = (buf[6] << 8) + buf[5]; + + if (bit_cnt < abort_cnt) { + abort_cnt = 1000; + state->ber = 0xffffffff; + } else { + /* 8 byte packets, that have not been rejected already */ + bit_cnt -= (u32)abort_cnt; + if (bit_cnt == 0) { + state->ber = 0xffffffff; + } else { + err_cnt -= (u32)abort_cnt * 8 * 8; + bit_cnt *= 8 * 8; + state->ber = err_cnt * (0xffffffff / bit_cnt); + } + } + state->ucb += abort_cnt; + state->last_stat_check = jiffies; + } + + return 0; +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9033_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct af9033_state *state = fe->demodulator_priv; + int ret; + + ret = af9033_update_ch_stat(state); + if (ret < 0) + return ret; + + *ber = state->ber; + + return 0; +} + +static int af9033_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct af9033_state *state = fe->demodulator_priv; + int ret; + + ret = af9033_update_ch_stat(state); + if (ret < 0) + return ret; + + *ucblocks = state->ucb; + + return 0; +} + +static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct af9033_state *state = fe->demodulator_priv; + int ret; + + dev_dbg(&state->i2c->dev, "%s: enable=%d\n", __func__, enable); + + ret = af9033_wr_reg_mask(state, 0x00fa04, enable, 0x01); + if (ret < 0) + goto err; + + return 0; + +err: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static struct dvb_frontend_ops af9033_ops; + +struct dvb_frontend *af9033_attach(const struct af9033_config *config, + struct i2c_adapter *i2c) +{ + int ret; + struct af9033_state *state; + u8 buf[8]; + + dev_dbg(&i2c->dev, "%s:\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct af9033_state), GFP_KERNEL); + if (state == NULL) + goto err; + + /* setup the state */ + state->i2c = i2c; + memcpy(&state->cfg, config, sizeof(struct af9033_config)); + + if (state->cfg.clock != 12000000) { + dev_err(&state->i2c->dev, "%s: af9033: unsupported clock=%d, " \ + "only 12000000 Hz is supported currently\n", + KBUILD_MODNAME, state->cfg.clock); + goto err; + } + + /* firmware version */ + ret = af9033_rd_regs(state, 0x0083e9, &buf[0], 4); + if (ret < 0) + goto err; + + ret = af9033_rd_regs(state, 0x804191, &buf[4], 4); + if (ret < 0) + goto err; + + dev_info(&state->i2c->dev, "%s: firmware version: LINK=%d.%d.%d.%d " \ + "OFDM=%d.%d.%d.%d\n", KBUILD_MODNAME, buf[0], buf[1], + buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); + + /* sleep */ + switch (state->cfg.tuner) { + case AF9033_TUNER_IT9135_38: + case AF9033_TUNER_IT9135_51: + case AF9033_TUNER_IT9135_52: + case AF9033_TUNER_IT9135_60: + case AF9033_TUNER_IT9135_61: + case AF9033_TUNER_IT9135_62: + /* IT9135 did not like to sleep at that early */ + break; + default: + ret = af9033_wr_reg(state, 0x80004c, 1); + if (ret < 0) + goto err; + + ret = af9033_wr_reg(state, 0x800000, 0); + if (ret < 0) + goto err; + } + + /* configure internal TS mode */ + switch (state->cfg.ts_mode) { + case AF9033_TS_MODE_PARALLEL: + state->ts_mode_parallel = true; + break; + case AF9033_TS_MODE_SERIAL: + state->ts_mode_serial = true; + break; + case AF9033_TS_MODE_USB: + /* usb mode for AF9035 */ + default: + break; + } + + /* create dvb_frontend */ + memcpy(&state->fe.ops, &af9033_ops, sizeof(struct dvb_frontend_ops)); + state->fe.demodulator_priv = state; + + return &state->fe; + +err: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(af9033_attach); + +static struct dvb_frontend_ops af9033_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Afatech AF9033 (DVB-T)", + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 250000, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = af9033_release, + + .init = af9033_init, + .sleep = af9033_sleep, + + .get_tune_settings = af9033_get_tune_settings, + .set_frontend = af9033_set_frontend, + .get_frontend = af9033_get_frontend, + + .read_status = af9033_read_status, + .read_snr = af9033_read_snr, + .read_signal_strength = af9033_read_signal_strength, + .read_ber = af9033_read_ber, + .read_ucblocks = af9033_read_ucblocks, + + .i2c_gate_ctrl = af9033_i2c_gate_ctrl, +}; + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Afatech AF9033 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/af9033.h b/drivers/media/dvb-frontends/af9033.h new file mode 100644 index 00000000..c286e8f1 --- /dev/null +++ b/drivers/media/dvb-frontends/af9033.h @@ -0,0 +1,93 @@ +/* + * Afatech AF9033 demodulator driver + * + * Copyright (C) 2009 Antti Palosaari + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef AF9033_H +#define AF9033_H + +#include + +struct af9033_config { + /* + * I2C address + */ + u8 i2c_addr; + + /* + * clock Hz + * 12000000, 22000000, 24000000, 34000000, 32000000, 28000000, 26000000, + * 30000000, 36000000, 20480000, 16384000 + */ + u32 clock; + + /* + * ADC multiplier + */ +#define AF9033_ADC_MULTIPLIER_1X 0 +#define AF9033_ADC_MULTIPLIER_2X 1 + u8 adc_multiplier; + + /* + * tuner + */ +#define AF9033_TUNER_TUA9001 0x27 /* Infineon TUA 9001 */ +#define AF9033_TUNER_FC0011 0x28 /* Fitipower FC0011 */ +#define AF9033_TUNER_FC0012 0x2e /* Fitipower FC0012 */ +#define AF9033_TUNER_MXL5007T 0xa0 /* MaxLinear MxL5007T */ +#define AF9033_TUNER_TDA18218 0xa1 /* NXP TDA 18218HN */ +#define AF9033_TUNER_FC2580 0x32 /* FCI FC2580 */ +/* 50-5f Omega */ +#define AF9033_TUNER_IT9135_38 0x38 /* Omega */ +#define AF9033_TUNER_IT9135_51 0x51 /* Omega LNA config 1 */ +#define AF9033_TUNER_IT9135_52 0x52 /* Omega LNA config 2 */ +/* 60-6f Omega v2 */ +#define AF9033_TUNER_IT9135_60 0x60 /* Omega v2 */ +#define AF9033_TUNER_IT9135_61 0x61 /* Omega v2 LNA config 1 */ +#define AF9033_TUNER_IT9135_62 0x62 /* Omega v2 LNA config 2 */ + u8 tuner; + + /* + * TS settings + */ +#define AF9033_TS_MODE_USB 0 +#define AF9033_TS_MODE_PARALLEL 1 +#define AF9033_TS_MODE_SERIAL 2 + u8 ts_mode:2; + + /* + * input spectrum inversion + */ + bool spec_inv; +}; + + +#if IS_ENABLED(CONFIG_DVB_AF9033) +extern struct dvb_frontend *af9033_attach(const struct af9033_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *af9033_attach( + const struct af9033_config *config, struct i2c_adapter *i2c) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* AF9033_H */ diff --git a/drivers/media/dvb-frontends/af9033_priv.h b/drivers/media/dvb-frontends/af9033_priv.h new file mode 100644 index 00000000..fc2ad581 --- /dev/null +++ b/drivers/media/dvb-frontends/af9033_priv.h @@ -0,0 +1,2055 @@ +/* + * Afatech AF9033 demodulator driver + * + * Copyright (C) 2009 Antti Palosaari + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef AF9033_PRIV_H +#define AF9033_PRIV_H + +#include "dvb_frontend.h" +#include "af9033.h" + +struct reg_val { + u32 reg; + u8 val; +}; + +struct reg_val_mask { + u32 reg; + u8 val; + u8 mask; +}; + +struct coeff { + u32 clock; + u32 bandwidth_hz; + u8 val[36]; +}; + +struct clock_adc { + u32 clock; + u32 adc; +}; + +struct val_snr { + u32 val; + u8 snr; +}; + +/* Xtal clock vs. ADC clock lookup table */ +static const struct clock_adc clock_adc_lut[] = { + { 16384000, 20480000 }, + { 20480000, 20480000 }, + { 36000000, 20250000 }, + { 30000000, 20156250 }, + { 26000000, 20583333 }, + { 28000000, 20416667 }, + { 32000000, 20500000 }, + { 34000000, 20187500 }, + { 24000000, 20500000 }, + { 22000000, 20625000 }, + { 12000000, 20250000 }, +}; + +/* pre-calculated coeff lookup table */ +static const struct coeff coeff_lut[] = { + /* 12.000 MHz */ + { 12000000, 8000000, { + 0x01, 0xce, 0x55, 0xc9, 0x00, 0xe7, 0x2a, 0xe4, 0x00, 0x73, + 0x99, 0x0f, 0x00, 0x73, 0x95, 0x72, 0x00, 0x73, 0x91, 0xd5, + 0x00, 0x39, 0xca, 0xb9, 0x00, 0xe7, 0x2a, 0xe4, 0x00, 0x73, + 0x95, 0x72, 0x37, 0x02, 0xce, 0x01 } + }, + { 12000000, 7000000, { + 0x01, 0x94, 0x8b, 0x10, 0x00, 0xca, 0x45, 0x88, 0x00, 0x65, + 0x25, 0xed, 0x00, 0x65, 0x22, 0xc4, 0x00, 0x65, 0x1f, 0x9b, + 0x00, 0x32, 0x91, 0x62, 0x00, 0xca, 0x45, 0x88, 0x00, 0x65, + 0x22, 0xc4, 0x88, 0x02, 0x95, 0x01 } + }, + { 12000000, 6000000, { + 0x01, 0x5a, 0xc0, 0x56, 0x00, 0xad, 0x60, 0x2b, 0x00, 0x56, + 0xb2, 0xcb, 0x00, 0x56, 0xb0, 0x15, 0x00, 0x56, 0xad, 0x60, + 0x00, 0x2b, 0x58, 0x0b, 0x00, 0xad, 0x60, 0x2b, 0x00, 0x56, + 0xb0, 0x15, 0xf4, 0x02, 0x5b, 0x01 } + }, +}; + +/* QPSK SNR lookup table */ +static const struct val_snr qpsk_snr_lut[] = { + { 0x0b4771, 0 }, + { 0x0c1aed, 1 }, + { 0x0d0d27, 2 }, + { 0x0e4d19, 3 }, + { 0x0e5da8, 4 }, + { 0x107097, 5 }, + { 0x116975, 6 }, + { 0x1252d9, 7 }, + { 0x131fa4, 8 }, + { 0x13d5e1, 9 }, + { 0x148e53, 10 }, + { 0x15358b, 11 }, + { 0x15dd29, 12 }, + { 0x168112, 13 }, + { 0x170b61, 14 }, + { 0x17a532, 15 }, + { 0x180f94, 16 }, + { 0x186ed2, 17 }, + { 0x18b271, 18 }, + { 0x18e118, 19 }, + { 0x18ff4b, 20 }, + { 0x190af1, 21 }, + { 0x191451, 22 }, + { 0xffffff, 23 }, +}; + +/* QAM16 SNR lookup table */ +static const struct val_snr qam16_snr_lut[] = { + { 0x04f0d5, 0 }, + { 0x05387a, 1 }, + { 0x0573a4, 2 }, + { 0x05a99e, 3 }, + { 0x05cc80, 4 }, + { 0x05eb62, 5 }, + { 0x05fecf, 6 }, + { 0x060b80, 7 }, + { 0x062501, 8 }, + { 0x064865, 9 }, + { 0x069604, 10 }, + { 0x06f356, 11 }, + { 0x07706a, 12 }, + { 0x0804d3, 13 }, + { 0x089d1a, 14 }, + { 0x093e3d, 15 }, + { 0x09e35d, 16 }, + { 0x0a7c3c, 17 }, + { 0x0afaf8, 18 }, + { 0x0b719d, 19 }, + { 0x0bda6a, 20 }, + { 0x0c0c75, 21 }, + { 0x0c3f7d, 22 }, + { 0x0c5e62, 23 }, + { 0x0c6c31, 24 }, + { 0x0c7925, 25 }, + { 0xffffff, 26 }, +}; + +/* QAM64 SNR lookup table */ +static const struct val_snr qam64_snr_lut[] = { + { 0x0256d0, 0 }, + { 0x027a65, 1 }, + { 0x029873, 2 }, + { 0x02b7fe, 3 }, + { 0x02cf1e, 4 }, + { 0x02e234, 5 }, + { 0x02f409, 6 }, + { 0x030046, 7 }, + { 0x030844, 8 }, + { 0x030a02, 9 }, + { 0x030cde, 10 }, + { 0x031031, 11 }, + { 0x03144c, 12 }, + { 0x0315dd, 13 }, + { 0x031920, 14 }, + { 0x0322d0, 15 }, + { 0x0339fc, 16 }, + { 0x0364a1, 17 }, + { 0x038bcc, 18 }, + { 0x03c7d3, 19 }, + { 0x0408cc, 20 }, + { 0x043bed, 21 }, + { 0x048061, 22 }, + { 0x04be95, 23 }, + { 0x04fa7d, 24 }, + { 0x052405, 25 }, + { 0x05570d, 26 }, + { 0x059feb, 27 }, + { 0x05bf38, 28 }, + { 0xffffff, 29 }, +}; + +static const struct reg_val ofsm_init[] = { + { 0x800051, 0x01 }, + { 0x800070, 0x0a }, + { 0x80007e, 0x04 }, + { 0x800081, 0x0a }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800099, 0x01 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000c4, 0x05 }, + { 0x8000c8, 0x19 }, + { 0x80f000, 0x0f }, + { 0x80f016, 0x10 }, + { 0x80f017, 0x04 }, + { 0x80f018, 0x05 }, + { 0x80f019, 0x04 }, + { 0x80f01a, 0x05 }, + { 0x80f021, 0x03 }, + { 0x80f022, 0x0a }, + { 0x80f023, 0x0a }, + { 0x80f02b, 0x00 }, + { 0x80f02c, 0x01 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f078, 0x00 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5df, 0xfb }, + { 0x80f5e0, 0x00 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f5f8, 0x01 }, + { 0x80f5fd, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +/* Infineon TUA 9001 tuner init + AF9033_TUNER_TUA9001 = 0x27 */ +static const struct reg_val tuner_init_tua9001[] = { + { 0x800046, 0x27 }, + { 0x800057, 0x00 }, + { 0x800058, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x80006d, 0x00 }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800074, 0x01 }, + { 0x800075, 0x03 }, + { 0x800076, 0x02 }, + { 0x800077, 0x00 }, + { 0x800078, 0x01 }, + { 0x800079, 0x00 }, + { 0x80007a, 0x7e }, + { 0x80007b, 0x3e }, + { 0x800093, 0x00 }, + { 0x800094, 0x01 }, + { 0x800095, 0x02 }, + { 0x800096, 0x01 }, + { 0x800098, 0x0a }, + { 0x80009b, 0x05 }, + { 0x80009c, 0x80 }, + { 0x8000b3, 0x00 }, + { 0x8000c5, 0x01 }, + { 0x8000c6, 0x00 }, + { 0x8000c9, 0x5d }, + { 0x80f007, 0x00 }, + { 0x80f01f, 0x82 }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x82 }, + { 0x80f02a, 0x00 }, + { 0x80f047, 0x00 }, + { 0x80f054, 0x00 }, + { 0x80f055, 0x00 }, + { 0x80f077, 0x01 }, + { 0x80f1e6, 0x00 }, +}; + +/* Fitipower fc0011 tuner init + AF9033_TUNER_FC0011 = 0x28 */ +static const struct reg_val tuner_init_fc0011[] = { + { 0x800046, 0x28 }, + { 0x800057, 0x00 }, + { 0x800058, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800068, 0xa5 }, + { 0x80006e, 0x01 }, + { 0x800071, 0x0a }, + { 0x800072, 0x02 }, + { 0x800074, 0x01 }, + { 0x800079, 0x01 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x00 }, + { 0x80009b, 0x2d }, + { 0x80009c, 0x60 }, + { 0x80009d, 0x23 }, + { 0x8000a4, 0x50 }, + { 0x8000ad, 0x50 }, + { 0x8000b3, 0x01 }, + { 0x8000b7, 0x88 }, + { 0x8000b8, 0xa6 }, + { 0x8000c5, 0x01 }, + { 0x8000c6, 0x01 }, + { 0x8000c9, 0x69 }, + { 0x80f007, 0x00 }, + { 0x80f00a, 0x1b }, + { 0x80f00b, 0x1b }, + { 0x80f00c, 0x1b }, + { 0x80f00d, 0x1b }, + { 0x80f00e, 0xff }, + { 0x80f00f, 0x01 }, + { 0x80f010, 0x00 }, + { 0x80f011, 0x02 }, + { 0x80f012, 0xff }, + { 0x80f013, 0x01 }, + { 0x80f014, 0x00 }, + { 0x80f015, 0x02 }, + { 0x80f01b, 0xef }, + { 0x80f01c, 0x01 }, + { 0x80f01d, 0x0f }, + { 0x80f01e, 0x02 }, + { 0x80f01f, 0x6e }, + { 0x80f020, 0x00 }, + { 0x80f025, 0xde }, + { 0x80f026, 0x00 }, + { 0x80f027, 0x0a }, + { 0x80f028, 0x03 }, + { 0x80f029, 0x6e }, + { 0x80f02a, 0x00 }, + { 0x80f047, 0x00 }, + { 0x80f054, 0x00 }, + { 0x80f055, 0x00 }, + { 0x80f077, 0x01 }, + { 0x80f1e6, 0x00 }, +}; + +/* Fitipower FC0012 tuner init + AF9033_TUNER_FC0012 = 0x2e */ +static const struct reg_val tuner_init_fc0012[] = { + { 0x800046, 0x2e }, + { 0x800057, 0x00 }, + { 0x800058, 0x01 }, + { 0x800059, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x80006d, 0x00 }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800074, 0x01 }, + { 0x800075, 0x03 }, + { 0x800076, 0x02 }, + { 0x800077, 0x01 }, + { 0x800078, 0x00 }, + { 0x800079, 0x00 }, + { 0x80007a, 0x90 }, + { 0x80007b, 0x90 }, + { 0x800093, 0x00 }, + { 0x800094, 0x01 }, + { 0x800095, 0x02 }, + { 0x800096, 0x01 }, + { 0x800098, 0x0a }, + { 0x80009b, 0x05 }, + { 0x80009c, 0x80 }, + { 0x8000b3, 0x00 }, + { 0x8000c5, 0x01 }, + { 0x8000c6, 0x00 }, + { 0x8000c9, 0x5d }, + { 0x80f007, 0x00 }, + { 0x80f01f, 0xa0 }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x82 }, + { 0x80f02a, 0x00 }, + { 0x80f047, 0x00 }, + { 0x80f054, 0x00 }, + { 0x80f055, 0x00 }, + { 0x80f077, 0x01 }, + { 0x80f1e6, 0x00 }, +}; + +/* MaxLinear MxL5007T tuner init + AF9033_TUNER_MXL5007T = 0xa0 */ +static const struct reg_val tuner_init_mxl5007t[] = { + { 0x800046, 0x1b }, + { 0x800057, 0x01 }, + { 0x800058, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800068, 0x96 }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800074, 0x01 }, + { 0x800079, 0x01 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x00 }, + { 0x8000b3, 0x01 }, + { 0x8000c1, 0x01 }, + { 0x8000c2, 0x00 }, + { 0x80f007, 0x00 }, + { 0x80f00c, 0x19 }, + { 0x80f00d, 0x1a }, + { 0x80f012, 0xda }, + { 0x80f013, 0x00 }, + { 0x80f014, 0x00 }, + { 0x80f015, 0x02 }, + { 0x80f01f, 0x82 }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x82 }, + { 0x80f02a, 0x00 }, + { 0x80f077, 0x02 }, + { 0x80f1e6, 0x00 }, +}; + +/* NXP TDA 18218HN tuner init + AF9033_TUNER_TDA18218 = 0xa1 */ +static const struct reg_val tuner_init_tda18218[] = { + {0x800046, 0xa1}, + {0x800057, 0x01}, + {0x800058, 0x01}, + {0x80005f, 0x00}, + {0x800060, 0x00}, + {0x800071, 0x05}, + {0x800072, 0x02}, + {0x800074, 0x01}, + {0x800079, 0x01}, + {0x800093, 0x00}, + {0x800094, 0x00}, + {0x800095, 0x00}, + {0x800096, 0x00}, + {0x8000b3, 0x01}, + {0x8000c3, 0x01}, + {0x8000c4, 0x00}, + {0x80f007, 0x00}, + {0x80f00c, 0x19}, + {0x80f00d, 0x1a}, + {0x80f012, 0xda}, + {0x80f013, 0x00}, + {0x80f014, 0x00}, + {0x80f015, 0x02}, + {0x80f01f, 0x82}, + {0x80f020, 0x00}, + {0x80f029, 0x82}, + {0x80f02a, 0x00}, + {0x80f077, 0x02}, + {0x80f1e6, 0x00}, +}; + +/* FCI FC2580 tuner init */ +static const struct reg_val tuner_init_fc2580[] = { + { 0x800046, 0x32 }, + { 0x800057, 0x01 }, + { 0x800058, 0x00 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800074, 0x01 }, + { 0x800079, 0x01 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x05 }, + { 0x8000b3, 0x01 }, + { 0x8000c5, 0x01 }, + { 0x8000c6, 0x00 }, + { 0x8000d1, 0x01 }, + { 0x80f007, 0x00 }, + { 0x80f00c, 0x19 }, + { 0x80f00d, 0x1a }, + { 0x80f00e, 0x00 }, + { 0x80f00f, 0x02 }, + { 0x80f010, 0x00 }, + { 0x80f011, 0x02 }, + { 0x80f012, 0x00 }, + { 0x80f013, 0x02 }, + { 0x80f014, 0x00 }, + { 0x80f015, 0x02 }, + { 0x80f01f, 0x96 }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x96 }, + { 0x80f02a, 0x00 }, + { 0x80f077, 0x01 }, + { 0x80f1e6, 0x01 }, +}; + +static const struct reg_val ofsm_init_it9135_v1[] = { + { 0x800051, 0x01 }, + { 0x800070, 0x0a }, + { 0x80007e, 0x04 }, + { 0x800081, 0x0a }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800099, 0x01 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000c2, 0x05 }, + { 0x8000c6, 0x19 }, + { 0x80f000, 0x0f }, + { 0x80f016, 0x10 }, + { 0x80f017, 0x04 }, + { 0x80f018, 0x05 }, + { 0x80f019, 0x04 }, + { 0x80f01a, 0x05 }, + { 0x80f021, 0x03 }, + { 0x80f022, 0x0a }, + { 0x80f023, 0x0a }, + { 0x80f02b, 0x00 }, + { 0x80f02c, 0x01 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f078, 0x00 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5df, 0xfb }, + { 0x80f5e0, 0x00 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f5f8, 0x01 }, + { 0x80f5fd, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +/* ITE Tech IT9135 Omega tuner init + AF9033_TUNER_IT9135_38 = 0x38 */ +static const struct reg_val tuner_init_it9135_38[] = { + { 0x800043, 0x00 }, + { 0x800046, 0x38 }, + { 0x800051, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800068, 0x0a }, + { 0x800070, 0x0a }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800075, 0x8c }, + { 0x800076, 0x8c }, + { 0x800077, 0x8c }, + { 0x800078, 0xc8 }, + { 0x800079, 0x01 }, + { 0x80007e, 0x04 }, + { 0x80007f, 0x00 }, + { 0x800081, 0x0a }, + { 0x800082, 0x12 }, + { 0x800083, 0x02 }, + { 0x800084, 0x0a }, + { 0x800085, 0x03 }, + { 0x800086, 0xc8 }, + { 0x800087, 0xb8 }, + { 0x800088, 0xd0 }, + { 0x800089, 0xc3 }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x00 }, + { 0x800099, 0x01 }, + { 0x80009b, 0x3c }, + { 0x80009c, 0x28 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a4, 0x5a }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000b3, 0x02 }, + { 0x8000b4, 0x32 }, + { 0x8000b6, 0x14 }, + { 0x8000c0, 0x11 }, + { 0x8000c1, 0x00 }, + { 0x8000c2, 0x05 }, + { 0x8000c4, 0x00 }, + { 0x8000c6, 0x19 }, + { 0x8000c7, 0x00 }, + { 0x8000cc, 0x2e }, + { 0x8000cd, 0x51 }, + { 0x8000ce, 0x33 }, + { 0x8000f3, 0x05 }, + { 0x8000f4, 0x8c }, + { 0x8000f5, 0x8c }, + { 0x8000f8, 0x03 }, + { 0x8000f9, 0x06 }, + { 0x8000fa, 0x06 }, + { 0x8000fc, 0x02 }, + { 0x8000fd, 0x02 }, + { 0x8000fe, 0x02 }, + { 0x8000ff, 0x09 }, + { 0x800100, 0x50 }, + { 0x800101, 0x7b }, + { 0x800102, 0x77 }, + { 0x800103, 0x00 }, + { 0x800104, 0x02 }, + { 0x800105, 0xc8 }, + { 0x800106, 0x05 }, + { 0x800107, 0x7b }, + { 0x800109, 0x02 }, + { 0x800115, 0x0a }, + { 0x800116, 0x03 }, + { 0x800117, 0x02 }, + { 0x800118, 0x80 }, + { 0x80011a, 0xc8 }, + { 0x80011b, 0x7b }, + { 0x80011c, 0x8a }, + { 0x80011d, 0xa0 }, + { 0x800122, 0x02 }, + { 0x800123, 0x18 }, + { 0x800124, 0xc3 }, + { 0x800127, 0x00 }, + { 0x800128, 0x07 }, + { 0x80012a, 0x53 }, + { 0x80012b, 0x51 }, + { 0x80012c, 0x4e }, + { 0x80012d, 0x43 }, + { 0x800137, 0x01 }, + { 0x800138, 0x00 }, + { 0x800139, 0x07 }, + { 0x80013a, 0x00 }, + { 0x80013b, 0x06 }, + { 0x80013d, 0x00 }, + { 0x80013e, 0x01 }, + { 0x80013f, 0x5b }, + { 0x800140, 0xc8 }, + { 0x800141, 0x59 }, + { 0x80f000, 0x0f }, + { 0x80f016, 0x10 }, + { 0x80f017, 0x04 }, + { 0x80f018, 0x05 }, + { 0x80f019, 0x04 }, + { 0x80f01a, 0x05 }, + { 0x80f01f, 0x8c }, + { 0x80f020, 0x00 }, + { 0x80f021, 0x03 }, + { 0x80f022, 0x0a }, + { 0x80f023, 0x0a }, + { 0x80f029, 0x8c }, + { 0x80f02a, 0x00 }, + { 0x80f02b, 0x00 }, + { 0x80f02c, 0x01 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f077, 0x01 }, + { 0x80f078, 0x00 }, + { 0x80f085, 0x00 }, + { 0x80f086, 0x02 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f24c, 0x88 }, + { 0x80f24d, 0x95 }, + { 0x80f24e, 0x9a }, + { 0x80f24f, 0x90 }, + { 0x80f25a, 0x07 }, + { 0x80f25b, 0xe8 }, + { 0x80f25c, 0x03 }, + { 0x80f25d, 0xb0 }, + { 0x80f25e, 0x04 }, + { 0x80f270, 0x01 }, + { 0x80f271, 0x02 }, + { 0x80f272, 0x01 }, + { 0x80f273, 0x02 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5df, 0xfb }, + { 0x80f5e0, 0x00 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f5f8, 0x01 }, + { 0x80f5fd, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +/* ITE Tech IT9135 Omega LNA config 1 tuner init + AF9033_TUNER_IT9135_51 = 0x51 */ +static const struct reg_val tuner_init_it9135_51[] = { + { 0x800043, 0x00 }, + { 0x800046, 0x51 }, + { 0x800051, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800068, 0x0a }, + { 0x800070, 0x0a }, + { 0x800071, 0x06 }, + { 0x800072, 0x02 }, + { 0x800075, 0x8c }, + { 0x800076, 0x8c }, + { 0x800077, 0x8c }, + { 0x800078, 0xc8 }, + { 0x800079, 0x01 }, + { 0x80007e, 0x04 }, + { 0x80007f, 0x00 }, + { 0x800081, 0x0a }, + { 0x800082, 0x12 }, + { 0x800083, 0x02 }, + { 0x800084, 0x0a }, + { 0x800085, 0x03 }, + { 0x800086, 0xc0 }, + { 0x800087, 0x96 }, + { 0x800088, 0xcf }, + { 0x800089, 0xc3 }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x00 }, + { 0x800099, 0x01 }, + { 0x80009b, 0x3c }, + { 0x80009c, 0x28 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a4, 0x5a }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000b3, 0x02 }, + { 0x8000b4, 0x3c }, + { 0x8000b6, 0x14 }, + { 0x8000c0, 0x11 }, + { 0x8000c1, 0x00 }, + { 0x8000c2, 0x05 }, + { 0x8000c4, 0x00 }, + { 0x8000c6, 0x19 }, + { 0x8000c7, 0x00 }, + { 0x8000cc, 0x2e }, + { 0x8000cd, 0x51 }, + { 0x8000ce, 0x33 }, + { 0x8000f3, 0x05 }, + { 0x8000f4, 0x8c }, + { 0x8000f5, 0x8c }, + { 0x8000f8, 0x03 }, + { 0x8000f9, 0x06 }, + { 0x8000fa, 0x06 }, + { 0x8000fc, 0x03 }, + { 0x8000fd, 0x02 }, + { 0x8000fe, 0x02 }, + { 0x8000ff, 0x09 }, + { 0x800100, 0x50 }, + { 0x800101, 0x7a }, + { 0x800102, 0x77 }, + { 0x800103, 0x01 }, + { 0x800104, 0x02 }, + { 0x800105, 0xb0 }, + { 0x800106, 0x02 }, + { 0x800107, 0x7a }, + { 0x800109, 0x02 }, + { 0x800115, 0x0a }, + { 0x800116, 0x03 }, + { 0x800117, 0x02 }, + { 0x800118, 0x80 }, + { 0x80011a, 0xc0 }, + { 0x80011b, 0x7a }, + { 0x80011c, 0xac }, + { 0x80011d, 0x8c }, + { 0x800122, 0x02 }, + { 0x800123, 0x70 }, + { 0x800124, 0xa4 }, + { 0x800127, 0x00 }, + { 0x800128, 0x07 }, + { 0x80012a, 0x53 }, + { 0x80012b, 0x51 }, + { 0x80012c, 0x4e }, + { 0x80012d, 0x43 }, + { 0x800137, 0x01 }, + { 0x800138, 0x00 }, + { 0x800139, 0x07 }, + { 0x80013a, 0x00 }, + { 0x80013b, 0x06 }, + { 0x80013d, 0x00 }, + { 0x80013e, 0x01 }, + { 0x80013f, 0x5b }, + { 0x800140, 0xc0 }, + { 0x800141, 0x59 }, + { 0x80f000, 0x0f }, + { 0x80f016, 0x10 }, + { 0x80f017, 0x04 }, + { 0x80f018, 0x05 }, + { 0x80f019, 0x04 }, + { 0x80f01a, 0x05 }, + { 0x80f01f, 0x8c }, + { 0x80f020, 0x00 }, + { 0x80f021, 0x03 }, + { 0x80f022, 0x0a }, + { 0x80f023, 0x0a }, + { 0x80f029, 0x8c }, + { 0x80f02a, 0x00 }, + { 0x80f02b, 0x00 }, + { 0x80f02c, 0x01 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f077, 0x01 }, + { 0x80f078, 0x00 }, + { 0x80f085, 0xc0 }, + { 0x80f086, 0x01 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f24c, 0x88 }, + { 0x80f24d, 0x95 }, + { 0x80f24e, 0x9a }, + { 0x80f24f, 0x90 }, + { 0x80f25a, 0x07 }, + { 0x80f25b, 0xe8 }, + { 0x80f25c, 0x03 }, + { 0x80f25d, 0xb0 }, + { 0x80f25e, 0x04 }, + { 0x80f270, 0x01 }, + { 0x80f271, 0x02 }, + { 0x80f272, 0x01 }, + { 0x80f273, 0x02 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5df, 0xfb }, + { 0x80f5e0, 0x00 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f5f8, 0x01 }, + { 0x80f5fd, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +/* ITE Tech IT9135 Omega LNA config 2 tuner init + AF9033_TUNER_IT9135_52 = 0x52 */ +static const struct reg_val tuner_init_it9135_52[] = { + { 0x800043, 0x00 }, + { 0x800046, 0x52 }, + { 0x800051, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800068, 0x10 }, + { 0x800070, 0x0a }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800075, 0x8c }, + { 0x800076, 0x8c }, + { 0x800077, 0x8c }, + { 0x800078, 0xa0 }, + { 0x800079, 0x01 }, + { 0x80007e, 0x04 }, + { 0x80007f, 0x00 }, + { 0x800081, 0x0a }, + { 0x800082, 0x17 }, + { 0x800083, 0x03 }, + { 0x800084, 0x0a }, + { 0x800085, 0x03 }, + { 0x800086, 0xb3 }, + { 0x800087, 0x97 }, + { 0x800088, 0xc0 }, + { 0x800089, 0x9e }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x00 }, + { 0x800099, 0x01 }, + { 0x80009b, 0x3c }, + { 0x80009c, 0x28 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a4, 0x5c }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000b3, 0x02 }, + { 0x8000b4, 0x3c }, + { 0x8000b6, 0x14 }, + { 0x8000c0, 0x11 }, + { 0x8000c1, 0x00 }, + { 0x8000c2, 0x05 }, + { 0x8000c4, 0x00 }, + { 0x8000c6, 0x19 }, + { 0x8000c7, 0x00 }, + { 0x8000cc, 0x2e }, + { 0x8000cd, 0x51 }, + { 0x8000ce, 0x33 }, + { 0x8000f3, 0x05 }, + { 0x8000f4, 0x91 }, + { 0x8000f5, 0x8c }, + { 0x8000f8, 0x03 }, + { 0x8000f9, 0x06 }, + { 0x8000fa, 0x06 }, + { 0x8000fc, 0x03 }, + { 0x8000fd, 0x02 }, + { 0x8000fe, 0x02 }, + { 0x8000ff, 0x09 }, + { 0x800100, 0x50 }, + { 0x800101, 0x74 }, + { 0x800102, 0x77 }, + { 0x800103, 0x02 }, + { 0x800104, 0x02 }, + { 0x800105, 0xa4 }, + { 0x800106, 0x02 }, + { 0x800107, 0x6e }, + { 0x800109, 0x02 }, + { 0x800115, 0x0a }, + { 0x800116, 0x03 }, + { 0x800117, 0x02 }, + { 0x800118, 0x80 }, + { 0x80011a, 0xcd }, + { 0x80011b, 0x62 }, + { 0x80011c, 0xa4 }, + { 0x80011d, 0x8c }, + { 0x800122, 0x03 }, + { 0x800123, 0x18 }, + { 0x800124, 0x9e }, + { 0x800127, 0x00 }, + { 0x800128, 0x07 }, + { 0x80012a, 0x53 }, + { 0x80012b, 0x51 }, + { 0x80012c, 0x4e }, + { 0x80012d, 0x43 }, + { 0x800137, 0x00 }, + { 0x800138, 0x00 }, + { 0x800139, 0x07 }, + { 0x80013a, 0x00 }, + { 0x80013b, 0x06 }, + { 0x80013d, 0x00 }, + { 0x80013e, 0x01 }, + { 0x80013f, 0x5b }, + { 0x800140, 0xb6 }, + { 0x800141, 0x59 }, + { 0x80f000, 0x0f }, + { 0x80f016, 0x10 }, + { 0x80f017, 0x04 }, + { 0x80f018, 0x05 }, + { 0x80f019, 0x04 }, + { 0x80f01a, 0x05 }, + { 0x80f01f, 0x8c }, + { 0x80f020, 0x00 }, + { 0x80f021, 0x03 }, + { 0x80f022, 0x0a }, + { 0x80f023, 0x0a }, + { 0x80f029, 0x8c }, + { 0x80f02a, 0x00 }, + { 0x80f02b, 0x00 }, + { 0x80f02c, 0x01 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f077, 0x01 }, + { 0x80f078, 0x00 }, + { 0x80f085, 0xc0 }, + { 0x80f086, 0x01 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f24c, 0x88 }, + { 0x80f24d, 0x95 }, + { 0x80f24e, 0x9a }, + { 0x80f24f, 0x90 }, + { 0x80f25a, 0x07 }, + { 0x80f25b, 0xe8 }, + { 0x80f25c, 0x03 }, + { 0x80f25d, 0xb0 }, + { 0x80f25e, 0x04 }, + { 0x80f270, 0x01 }, + { 0x80f271, 0x02 }, + { 0x80f272, 0x01 }, + { 0x80f273, 0x02 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5df, 0xfb }, + { 0x80f5e0, 0x00 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f5f8, 0x01 }, + { 0x80f5fd, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +static const struct reg_val ofsm_init_it9135_v2[] = { + { 0x800051, 0x01 }, + { 0x800070, 0x0a }, + { 0x80007e, 0x04 }, + { 0x800081, 0x0a }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800099, 0x01 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000c2, 0x05 }, + { 0x8000c6, 0x19 }, + { 0x80f000, 0x0f }, + { 0x80f02b, 0x00 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f078, 0x00 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +/* ITE Tech IT9135 Omega v2 tuner init + AF9033_TUNER_IT9135_60 = 0x60 */ +static const struct reg_val tuner_init_it9135_60[] = { + { 0x800043, 0x00 }, + { 0x800046, 0x60 }, + { 0x800051, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800068, 0x0a }, + { 0x80006a, 0x03 }, + { 0x800070, 0x0a }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800075, 0x8c }, + { 0x800076, 0x8c }, + { 0x800077, 0x8c }, + { 0x800078, 0x8c }, + { 0x800079, 0x01 }, + { 0x80007e, 0x04 }, + { 0x800081, 0x0a }, + { 0x800082, 0x18 }, + { 0x800084, 0x0a }, + { 0x800085, 0x33 }, + { 0x800086, 0xbe }, + { 0x800087, 0xa0 }, + { 0x800088, 0xc6 }, + { 0x800089, 0xb6 }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x00 }, + { 0x800099, 0x01 }, + { 0x80009b, 0x3c }, + { 0x80009c, 0x28 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a4, 0x5a }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000b3, 0x02 }, + { 0x8000b4, 0x3a }, + { 0x8000b6, 0x14 }, + { 0x8000c0, 0x11 }, + { 0x8000c1, 0x00 }, + { 0x8000c2, 0x05 }, + { 0x8000c3, 0x01 }, + { 0x8000c4, 0x00 }, + { 0x8000c6, 0x19 }, + { 0x8000c7, 0x00 }, + { 0x8000cb, 0x32 }, + { 0x8000cc, 0x2c }, + { 0x8000cd, 0x4f }, + { 0x8000ce, 0x30 }, + { 0x8000f3, 0x05 }, + { 0x8000f4, 0xa0 }, + { 0x8000f5, 0x8c }, + { 0x8000f8, 0x03 }, + { 0x8000f9, 0x06 }, + { 0x8000fa, 0x06 }, + { 0x8000fc, 0x03 }, + { 0x8000fd, 0x03 }, + { 0x8000fe, 0x02 }, + { 0x8000ff, 0x0a }, + { 0x800100, 0x50 }, + { 0x800101, 0x7b }, + { 0x800102, 0x8c }, + { 0x800103, 0x00 }, + { 0x800104, 0x02 }, + { 0x800105, 0xbe }, + { 0x800106, 0x00 }, + { 0x800109, 0x02 }, + { 0x800115, 0x0a }, + { 0x800116, 0x03 }, + { 0x80011a, 0xbe }, + { 0x800124, 0xae }, + { 0x800127, 0x00 }, + { 0x80012a, 0x56 }, + { 0x80012b, 0x50 }, + { 0x80012c, 0x47 }, + { 0x80012d, 0x42 }, + { 0x800137, 0x00 }, + { 0x80013b, 0x08 }, + { 0x80013f, 0x5b }, + { 0x800141, 0x59 }, + { 0x800142, 0xf9 }, + { 0x800143, 0x19 }, + { 0x800144, 0x00 }, + { 0x800145, 0x8c }, + { 0x800146, 0x8c }, + { 0x800147, 0x8c }, + { 0x800148, 0x6e }, + { 0x800149, 0x8c }, + { 0x80014a, 0x50 }, + { 0x80014b, 0x8c }, + { 0x80014d, 0xac }, + { 0x80014e, 0xc6 }, + { 0x80014f, 0x03 }, + { 0x800151, 0x1e }, + { 0x800153, 0xbc }, + { 0x800178, 0x09 }, + { 0x800181, 0x94 }, + { 0x800182, 0x6e }, + { 0x800185, 0x24 }, + { 0x800189, 0xbe }, + { 0x80018c, 0x03 }, + { 0x80018d, 0x5f }, + { 0x80018f, 0xa0 }, + { 0x800190, 0x5a }, + { 0x80ed02, 0xff }, + { 0x80ee42, 0xff }, + { 0x80ee82, 0xff }, + { 0x80f000, 0x0f }, + { 0x80f01f, 0x8c }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x8c }, + { 0x80f02a, 0x00 }, + { 0x80f02b, 0x00 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f077, 0x01 }, + { 0x80f078, 0x00 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f24c, 0x88 }, + { 0x80f24d, 0x95 }, + { 0x80f24e, 0x9a }, + { 0x80f24f, 0x90 }, + { 0x80f25a, 0x07 }, + { 0x80f25b, 0xe8 }, + { 0x80f25c, 0x03 }, + { 0x80f25d, 0xb0 }, + { 0x80f25e, 0x04 }, + { 0x80f270, 0x01 }, + { 0x80f271, 0x02 }, + { 0x80f272, 0x01 }, + { 0x80f273, 0x02 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +/* ITE Tech IT9135 Omega v2 LNA config 1 tuner init + AF9033_TUNER_IT9135_61 = 0x61 */ +static const struct reg_val tuner_init_it9135_61[] = { + { 0x800043, 0x00 }, + { 0x800046, 0x61 }, + { 0x800051, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800068, 0x06 }, + { 0x80006a, 0x03 }, + { 0x800070, 0x0a }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800075, 0x8c }, + { 0x800076, 0x8c }, + { 0x800077, 0x8c }, + { 0x800078, 0x90 }, + { 0x800079, 0x01 }, + { 0x80007e, 0x04 }, + { 0x800081, 0x0a }, + { 0x800082, 0x12 }, + { 0x800084, 0x0a }, + { 0x800085, 0x33 }, + { 0x800086, 0xbc }, + { 0x800087, 0x9c }, + { 0x800088, 0xcc }, + { 0x800089, 0xa8 }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x00 }, + { 0x800099, 0x01 }, + { 0x80009b, 0x3c }, + { 0x80009c, 0x28 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a4, 0x5c }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000b3, 0x02 }, + { 0x8000b4, 0x3a }, + { 0x8000b6, 0x14 }, + { 0x8000c0, 0x11 }, + { 0x8000c1, 0x00 }, + { 0x8000c2, 0x05 }, + { 0x8000c3, 0x01 }, + { 0x8000c4, 0x00 }, + { 0x8000c6, 0x19 }, + { 0x8000c7, 0x00 }, + { 0x8000cb, 0x32 }, + { 0x8000cc, 0x2c }, + { 0x8000cd, 0x4f }, + { 0x8000ce, 0x30 }, + { 0x8000f3, 0x05 }, + { 0x8000f4, 0xa0 }, + { 0x8000f5, 0x8c }, + { 0x8000f8, 0x03 }, + { 0x8000f9, 0x06 }, + { 0x8000fa, 0x06 }, + { 0x8000fc, 0x03 }, + { 0x8000fd, 0x03 }, + { 0x8000fe, 0x02 }, + { 0x8000ff, 0x08 }, + { 0x800100, 0x50 }, + { 0x800101, 0x7b }, + { 0x800102, 0x8c }, + { 0x800103, 0x01 }, + { 0x800104, 0x02 }, + { 0x800105, 0xc8 }, + { 0x800106, 0x00 }, + { 0x800109, 0x02 }, + { 0x800115, 0x0a }, + { 0x800116, 0x03 }, + { 0x80011a, 0xc6 }, + { 0x800124, 0xa8 }, + { 0x800127, 0x00 }, + { 0x80012a, 0x59 }, + { 0x80012b, 0x50 }, + { 0x80012c, 0x47 }, + { 0x80012d, 0x42 }, + { 0x800137, 0x00 }, + { 0x80013b, 0x05 }, + { 0x80013f, 0x5b }, + { 0x800141, 0x59 }, + { 0x800142, 0xf9 }, + { 0x800143, 0x59 }, + { 0x800144, 0x01 }, + { 0x800145, 0x8c }, + { 0x800146, 0x8c }, + { 0x800147, 0x8c }, + { 0x800148, 0x7b }, + { 0x800149, 0x8c }, + { 0x80014a, 0x50 }, + { 0x80014b, 0x8c }, + { 0x80014d, 0xa8 }, + { 0x80014e, 0xc6 }, + { 0x80014f, 0x03 }, + { 0x800151, 0x28 }, + { 0x800153, 0xcc }, + { 0x800178, 0x09 }, + { 0x800181, 0x9c }, + { 0x800182, 0x76 }, + { 0x800185, 0x28 }, + { 0x800189, 0xaa }, + { 0x80018c, 0x03 }, + { 0x80018d, 0x5f }, + { 0x80018f, 0xfb }, + { 0x800190, 0x5c }, + { 0x80ed02, 0xff }, + { 0x80ee42, 0xff }, + { 0x80ee82, 0xff }, + { 0x80f000, 0x0f }, + { 0x80f01f, 0x8c }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x8c }, + { 0x80f02a, 0x00 }, + { 0x80f02b, 0x00 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f077, 0x01 }, + { 0x80f078, 0x00 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f24c, 0x88 }, + { 0x80f24d, 0x95 }, + { 0x80f24e, 0x9a }, + { 0x80f24f, 0x90 }, + { 0x80f25a, 0x07 }, + { 0x80f25b, 0xe8 }, + { 0x80f25c, 0x03 }, + { 0x80f25d, 0xb0 }, + { 0x80f25e, 0x04 }, + { 0x80f270, 0x01 }, + { 0x80f271, 0x02 }, + { 0x80f272, 0x01 }, + { 0x80f273, 0x02 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +/* ITE Tech IT9135 Omega v2 LNA config 2 tuner init + AF9033_TUNER_IT9135_62 = 0x62 */ +static const struct reg_val tuner_init_it9135_62[] = { + { 0x800043, 0x00 }, + { 0x800046, 0x62 }, + { 0x800051, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800068, 0x0a }, + { 0x80006a, 0x03 }, + { 0x800070, 0x0a }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800075, 0x8c }, + { 0x800076, 0x8c }, + { 0x800077, 0x8c }, + { 0x800078, 0x8c }, + { 0x800079, 0x01 }, + { 0x80007e, 0x04 }, + { 0x800081, 0x0a }, + { 0x800082, 0x12 }, + { 0x800084, 0x0a }, + { 0x800085, 0x33 }, + { 0x800086, 0xb8 }, + { 0x800087, 0x9c }, + { 0x800088, 0xb2 }, + { 0x800089, 0xa6 }, + { 0x80008a, 0x01 }, + { 0x80008e, 0x01 }, + { 0x800092, 0x06 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x00 }, + { 0x800099, 0x01 }, + { 0x80009b, 0x3c }, + { 0x80009c, 0x28 }, + { 0x80009f, 0xe1 }, + { 0x8000a0, 0xcf }, + { 0x8000a3, 0x01 }, + { 0x8000a4, 0x5a }, + { 0x8000a5, 0x01 }, + { 0x8000a6, 0x01 }, + { 0x8000a9, 0x00 }, + { 0x8000aa, 0x01 }, + { 0x8000b0, 0x01 }, + { 0x8000b3, 0x02 }, + { 0x8000b4, 0x3a }, + { 0x8000b6, 0x14 }, + { 0x8000c0, 0x11 }, + { 0x8000c1, 0x00 }, + { 0x8000c2, 0x05 }, + { 0x8000c3, 0x01 }, + { 0x8000c4, 0x00 }, + { 0x8000c6, 0x19 }, + { 0x8000c7, 0x00 }, + { 0x8000cb, 0x32 }, + { 0x8000cc, 0x2c }, + { 0x8000cd, 0x4f }, + { 0x8000ce, 0x30 }, + { 0x8000f3, 0x05 }, + { 0x8000f4, 0x8c }, + { 0x8000f5, 0x8c }, + { 0x8000f8, 0x03 }, + { 0x8000f9, 0x06 }, + { 0x8000fa, 0x06 }, + { 0x8000fc, 0x02 }, + { 0x8000fd, 0x03 }, + { 0x8000fe, 0x02 }, + { 0x8000ff, 0x09 }, + { 0x800100, 0x50 }, + { 0x800101, 0x6e }, + { 0x800102, 0x8c }, + { 0x800103, 0x02 }, + { 0x800104, 0x02 }, + { 0x800105, 0xc2 }, + { 0x800106, 0x00 }, + { 0x800109, 0x02 }, + { 0x800115, 0x0a }, + { 0x800116, 0x03 }, + { 0x80011a, 0xb8 }, + { 0x800124, 0xa8 }, + { 0x800127, 0x00 }, + { 0x80012a, 0x53 }, + { 0x80012b, 0x51 }, + { 0x80012c, 0x4e }, + { 0x80012d, 0x43 }, + { 0x800137, 0x00 }, + { 0x80013b, 0x05 }, + { 0x80013f, 0x5b }, + { 0x800141, 0x59 }, + { 0x800142, 0xf9 }, + { 0x800143, 0x59 }, + { 0x800144, 0x00 }, + { 0x800145, 0x8c }, + { 0x800146, 0x8c }, + { 0x800147, 0x8c }, + { 0x800148, 0x7b }, + { 0x800149, 0x8c }, + { 0x80014a, 0x50 }, + { 0x80014b, 0x70 }, + { 0x80014d, 0x96 }, + { 0x80014e, 0xd0 }, + { 0x80014f, 0x03 }, + { 0x800151, 0x28 }, + { 0x800153, 0xb2 }, + { 0x800178, 0x09 }, + { 0x800181, 0x9c }, + { 0x800182, 0x6e }, + { 0x800185, 0x24 }, + { 0x800189, 0xb8 }, + { 0x80018c, 0x03 }, + { 0x80018d, 0x5f }, + { 0x80018f, 0xfb }, + { 0x800190, 0x5a }, + { 0x80ed02, 0xff }, + { 0x80ee42, 0xff }, + { 0x80ee82, 0xff }, + { 0x80f000, 0x0f }, + { 0x80f01f, 0x8c }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x8c }, + { 0x80f02a, 0x00 }, + { 0x80f02b, 0x00 }, + { 0x80f064, 0x03 }, + { 0x80f065, 0xf9 }, + { 0x80f066, 0x03 }, + { 0x80f067, 0x01 }, + { 0x80f06f, 0xe0 }, + { 0x80f070, 0x03 }, + { 0x80f072, 0x0f }, + { 0x80f073, 0x03 }, + { 0x80f077, 0x01 }, + { 0x80f078, 0x00 }, + { 0x80f087, 0x00 }, + { 0x80f09b, 0x3f }, + { 0x80f09c, 0x00 }, + { 0x80f09d, 0x20 }, + { 0x80f09e, 0x00 }, + { 0x80f09f, 0x0c }, + { 0x80f0a0, 0x00 }, + { 0x80f130, 0x04 }, + { 0x80f132, 0x04 }, + { 0x80f144, 0x1a }, + { 0x80f146, 0x00 }, + { 0x80f14a, 0x01 }, + { 0x80f14c, 0x00 }, + { 0x80f14d, 0x00 }, + { 0x80f14f, 0x04 }, + { 0x80f158, 0x7f }, + { 0x80f15a, 0x00 }, + { 0x80f15b, 0x08 }, + { 0x80f15d, 0x03 }, + { 0x80f15e, 0x05 }, + { 0x80f163, 0x05 }, + { 0x80f166, 0x01 }, + { 0x80f167, 0x40 }, + { 0x80f168, 0x0f }, + { 0x80f17a, 0x00 }, + { 0x80f17b, 0x00 }, + { 0x80f183, 0x01 }, + { 0x80f19d, 0x40 }, + { 0x80f1bc, 0x36 }, + { 0x80f1bd, 0x00 }, + { 0x80f1cb, 0xa0 }, + { 0x80f1cc, 0x01 }, + { 0x80f204, 0x10 }, + { 0x80f214, 0x00 }, + { 0x80f24c, 0x88 }, + { 0x80f24d, 0x95 }, + { 0x80f24e, 0x9a }, + { 0x80f24f, 0x90 }, + { 0x80f25a, 0x07 }, + { 0x80f25b, 0xe8 }, + { 0x80f25c, 0x03 }, + { 0x80f25d, 0xb0 }, + { 0x80f25e, 0x04 }, + { 0x80f270, 0x01 }, + { 0x80f271, 0x02 }, + { 0x80f272, 0x01 }, + { 0x80f273, 0x02 }, + { 0x80f40e, 0x0a }, + { 0x80f40f, 0x40 }, + { 0x80f410, 0x08 }, + { 0x80f55f, 0x0a }, + { 0x80f561, 0x15 }, + { 0x80f562, 0x20 }, + { 0x80f5e3, 0x09 }, + { 0x80f5e4, 0x01 }, + { 0x80f5e5, 0x01 }, + { 0x80f600, 0x05 }, + { 0x80f601, 0x08 }, + { 0x80f602, 0x0b }, + { 0x80f603, 0x0e }, + { 0x80f604, 0x11 }, + { 0x80f605, 0x14 }, + { 0x80f606, 0x17 }, + { 0x80f607, 0x1f }, + { 0x80f60e, 0x00 }, + { 0x80f60f, 0x04 }, + { 0x80f610, 0x32 }, + { 0x80f611, 0x10 }, + { 0x80f707, 0xfc }, + { 0x80f708, 0x00 }, + { 0x80f709, 0x37 }, + { 0x80f70a, 0x00 }, + { 0x80f78b, 0x01 }, + { 0x80f80f, 0x40 }, + { 0x80f810, 0x54 }, + { 0x80f811, 0x5a }, + { 0x80f905, 0x01 }, + { 0x80fb06, 0x03 }, + { 0x80fd8b, 0x00 }, +}; + +#endif /* AF9033_PRIV_H */ diff --git a/drivers/media/dvb-frontends/atbm8830.c b/drivers/media/dvb-frontends/atbm8830.c new file mode 100644 index 00000000..4e11dc4b --- /dev/null +++ b/drivers/media/dvb-frontends/atbm8830.c @@ -0,0 +1,508 @@ +/* + * Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator + * ATBM8830, ATBM8831 + * + * Copyright (C) 2009 David T.L. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include "dvb_frontend.h" + +#include "atbm8830.h" +#include "atbm8830_priv.h" + +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "atbm8830: " args); \ + } while (0) + +static int debug; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +static int atbm8830_write_reg(struct atbm_state *priv, u16 reg, u8 data) +{ + int ret = 0; + u8 dev_addr; + u8 buf1[] = { reg >> 8, reg & 0xFF }; + u8 buf2[] = { data }; + struct i2c_msg msg1 = { .flags = 0, .buf = buf1, .len = 2 }; + struct i2c_msg msg2 = { .flags = 0, .buf = buf2, .len = 1 }; + + dev_addr = priv->config->demod_address; + msg1.addr = dev_addr; + msg2.addr = dev_addr; + + if (debug >= 2) + dprintk("%s: reg=0x%04X, data=0x%02X\n", __func__, reg, data); + + ret = i2c_transfer(priv->i2c, &msg1, 1); + if (ret != 1) + return -EIO; + + ret = i2c_transfer(priv->i2c, &msg2, 1); + return (ret != 1) ? -EIO : 0; +} + +static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data) +{ + int ret; + u8 dev_addr; + + u8 buf1[] = { reg >> 8, reg & 0xFF }; + u8 buf2[] = { 0 }; + struct i2c_msg msg1 = { .flags = 0, .buf = buf1, .len = 2 }; + struct i2c_msg msg2 = { .flags = I2C_M_RD, .buf = buf2, .len = 1 }; + + dev_addr = priv->config->demod_address; + msg1.addr = dev_addr; + msg2.addr = dev_addr; + + ret = i2c_transfer(priv->i2c, &msg1, 1); + if (ret != 1) { + dprintk("%s: error reg=0x%04x, ret=%i\n", __func__, reg, ret); + return -EIO; + } + + ret = i2c_transfer(priv->i2c, &msg2, 1); + if (ret != 1) + return -EIO; + + *p_data = buf2[0]; + if (debug >= 2) + dprintk("%s: reg=0x%04X, data=0x%02X\n", + __func__, reg, buf2[0]); + + return 0; +} + +/* Lock register latch so that multi-register read is atomic */ +static inline int atbm8830_reglatch_lock(struct atbm_state *priv, int lock) +{ + return atbm8830_write_reg(priv, REG_READ_LATCH, lock ? 1 : 0); +} + +static int set_osc_freq(struct atbm_state *priv, u32 freq /*in kHz*/) +{ + u32 val; + u64 t; + + /* 0x100000 * freq / 30.4MHz */ + t = (u64)0x100000 * freq; + do_div(t, 30400); + val = t; + + atbm8830_write_reg(priv, REG_OSC_CLK, val); + atbm8830_write_reg(priv, REG_OSC_CLK + 1, val >> 8); + atbm8830_write_reg(priv, REG_OSC_CLK + 2, val >> 16); + + return 0; +} + +static int set_if_freq(struct atbm_state *priv, u32 freq /*in kHz*/) +{ + + u32 fs = priv->config->osc_clk_freq; + u64 t; + u32 val; + u8 dat; + + if (freq != 0) { + /* 2 * PI * (freq - fs) / fs * (2 ^ 22) */ + t = (u64) 2 * 31416 * (freq - fs); + t <<= 22; + do_div(t, fs); + do_div(t, 1000); + val = t; + + atbm8830_write_reg(priv, REG_TUNER_BASEBAND, 1); + atbm8830_write_reg(priv, REG_IF_FREQ, val); + atbm8830_write_reg(priv, REG_IF_FREQ+1, val >> 8); + atbm8830_write_reg(priv, REG_IF_FREQ+2, val >> 16); + + atbm8830_read_reg(priv, REG_ADC_CONFIG, &dat); + dat &= 0xFC; + atbm8830_write_reg(priv, REG_ADC_CONFIG, dat); + } else { + /* Zero IF */ + atbm8830_write_reg(priv, REG_TUNER_BASEBAND, 0); + + atbm8830_read_reg(priv, REG_ADC_CONFIG, &dat); + dat &= 0xFC; + dat |= 0x02; + atbm8830_write_reg(priv, REG_ADC_CONFIG, dat); + + if (priv->config->zif_swap_iq) + atbm8830_write_reg(priv, REG_SWAP_I_Q, 0x03); + else + atbm8830_write_reg(priv, REG_SWAP_I_Q, 0x01); + } + + return 0; +} + +static int is_locked(struct atbm_state *priv, u8 *locked) +{ + u8 status; + + atbm8830_read_reg(priv, REG_LOCK_STATUS, &status); + + if (locked != NULL) + *locked = (status == 1); + return 0; +} + +static int set_agc_config(struct atbm_state *priv, + u8 min, u8 max, u8 hold_loop) +{ + /* no effect if both min and max are zero */ + if (!min && !max) + return 0; + + atbm8830_write_reg(priv, REG_AGC_MIN, min); + atbm8830_write_reg(priv, REG_AGC_MAX, max); + atbm8830_write_reg(priv, REG_AGC_HOLD_LOOP, hold_loop); + + return 0; +} + +static int set_static_channel_mode(struct atbm_state *priv) +{ + int i; + + for (i = 0; i < 5; i++) + atbm8830_write_reg(priv, 0x099B + i, 0x08); + + atbm8830_write_reg(priv, 0x095B, 0x7F); + atbm8830_write_reg(priv, 0x09CB, 0x01); + atbm8830_write_reg(priv, 0x09CC, 0x7F); + atbm8830_write_reg(priv, 0x09CD, 0x7F); + atbm8830_write_reg(priv, 0x0E01, 0x20); + + /* For single carrier */ + atbm8830_write_reg(priv, 0x0B03, 0x0A); + atbm8830_write_reg(priv, 0x0935, 0x10); + atbm8830_write_reg(priv, 0x0936, 0x08); + atbm8830_write_reg(priv, 0x093E, 0x08); + atbm8830_write_reg(priv, 0x096E, 0x06); + + /* frame_count_max0 */ + atbm8830_write_reg(priv, 0x0B09, 0x00); + /* frame_count_max1 */ + atbm8830_write_reg(priv, 0x0B0A, 0x08); + + return 0; +} + +static int set_ts_config(struct atbm_state *priv) +{ + const struct atbm8830_config *cfg = priv->config; + + /*Set parallel/serial ts mode*/ + atbm8830_write_reg(priv, REG_TS_SERIAL, cfg->serial_ts ? 1 : 0); + atbm8830_write_reg(priv, REG_TS_CLK_MODE, cfg->serial_ts ? 1 : 0); + /*Set ts sampling edge*/ + atbm8830_write_reg(priv, REG_TS_SAMPLE_EDGE, + cfg->ts_sampling_edge ? 1 : 0); + /*Set ts clock freerun*/ + atbm8830_write_reg(priv, REG_TS_CLK_FREERUN, + cfg->ts_clk_gated ? 0 : 1); + + return 0; +} + +static int atbm8830_init(struct dvb_frontend *fe) +{ + struct atbm_state *priv = fe->demodulator_priv; + const struct atbm8830_config *cfg = priv->config; + + /*Set oscillator frequency*/ + set_osc_freq(priv, cfg->osc_clk_freq); + + /*Set IF frequency*/ + set_if_freq(priv, cfg->if_freq); + + /*Set AGC Config*/ + set_agc_config(priv, cfg->agc_min, cfg->agc_max, + cfg->agc_hold_loop); + + /*Set static channel mode*/ + set_static_channel_mode(priv); + + set_ts_config(priv); + /*Turn off DSP reset*/ + atbm8830_write_reg(priv, 0x000A, 0); + + /*SW version test*/ + atbm8830_write_reg(priv, 0x020C, 11); + + /* Run */ + atbm8830_write_reg(priv, REG_DEMOD_RUN, 1); + + return 0; +} + + +static void atbm8830_release(struct dvb_frontend *fe) +{ + struct atbm_state *state = fe->demodulator_priv; + dprintk("%s\n", __func__); + + kfree(state); +} + +static int atbm8830_set_fe(struct dvb_frontend *fe) +{ + struct atbm_state *priv = fe->demodulator_priv; + int i; + u8 locked = 0; + dprintk("%s\n", __func__); + + /* set frequency */ + if (fe->ops.tuner_ops.set_params) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* start auto lock */ + for (i = 0; i < 10; i++) { + mdelay(100); + dprintk("Try %d\n", i); + is_locked(priv, &locked); + if (locked != 0) { + dprintk("ATBM8830 locked!\n"); + break; + } + } + + return 0; +} + +static int atbm8830_get_fe(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + dprintk("%s\n", __func__); + + /* TODO: get real readings from device */ + /* inversion status */ + c->inversion = INVERSION_OFF; + + /* bandwidth */ + c->bandwidth_hz = 8000000; + + c->code_rate_HP = FEC_AUTO; + c->code_rate_LP = FEC_AUTO; + + c->modulation = QAM_AUTO; + + /* transmission mode */ + c->transmission_mode = TRANSMISSION_MODE_AUTO; + + /* guard interval */ + c->guard_interval = GUARD_INTERVAL_AUTO; + + /* hierarchy */ + c->hierarchy = HIERARCHY_NONE; + + return 0; +} + +static int atbm8830_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 0; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static int atbm8830_read_status(struct dvb_frontend *fe, fe_status_t *fe_status) +{ + struct atbm_state *priv = fe->demodulator_priv; + u8 locked = 0; + u8 agc_locked = 0; + + dprintk("%s\n", __func__); + *fe_status = 0; + + is_locked(priv, &locked); + if (locked) { + *fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } + dprintk("%s: fe_status=0x%x\n", __func__, *fe_status); + + atbm8830_read_reg(priv, REG_AGC_LOCK, &agc_locked); + dprintk("AGC Lock: %d\n", agc_locked); + + return 0; +} + +static int atbm8830_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct atbm_state *priv = fe->demodulator_priv; + u32 frame_err; + u8 t; + + dprintk("%s\n", __func__); + + atbm8830_reglatch_lock(priv, 1); + + atbm8830_read_reg(priv, REG_FRAME_ERR_CNT + 1, &t); + frame_err = t & 0x7F; + frame_err <<= 8; + atbm8830_read_reg(priv, REG_FRAME_ERR_CNT, &t); + frame_err |= t; + + atbm8830_reglatch_lock(priv, 0); + + *ber = frame_err * 100 / 32767; + + dprintk("%s: ber=0x%x\n", __func__, *ber); + return 0; +} + +static int atbm8830_read_signal_strength(struct dvb_frontend *fe, u16 *signal) +{ + struct atbm_state *priv = fe->demodulator_priv; + u32 pwm; + u8 t; + + dprintk("%s\n", __func__); + atbm8830_reglatch_lock(priv, 1); + + atbm8830_read_reg(priv, REG_AGC_PWM_VAL + 1, &t); + pwm = t & 0x03; + pwm <<= 8; + atbm8830_read_reg(priv, REG_AGC_PWM_VAL, &t); + pwm |= t; + + atbm8830_reglatch_lock(priv, 0); + + dprintk("AGC PWM = 0x%02X\n", pwm); + pwm = 0x400 - pwm; + + *signal = pwm * 0x10000 / 0x400; + + return 0; +} + +static int atbm8830_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + dprintk("%s\n", __func__); + *snr = 0; + return 0; +} + +static int atbm8830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + dprintk("%s\n", __func__); + *ucblocks = 0; + return 0; +} + +static int atbm8830_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct atbm_state *priv = fe->demodulator_priv; + + return atbm8830_write_reg(priv, REG_I2C_GATE, enable ? 1 : 0); +} + +static struct dvb_frontend_ops atbm8830_ops = { + .delsys = { SYS_DTMB }, + .info = { + .name = "AltoBeam ATBM8830/8831 DMB-TH", + .frequency_min = 474000000, + .frequency_max = 858000000, + .frequency_stepsize = 10000, + .caps = + FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO + }, + + .release = atbm8830_release, + + .init = atbm8830_init, + .sleep = NULL, + .write = NULL, + .i2c_gate_ctrl = atbm8830_i2c_gate_ctrl, + + .set_frontend = atbm8830_set_fe, + .get_frontend = atbm8830_get_fe, + .get_tune_settings = atbm8830_get_tune_settings, + + .read_status = atbm8830_read_status, + .read_ber = atbm8830_read_ber, + .read_signal_strength = atbm8830_read_signal_strength, + .read_snr = atbm8830_read_snr, + .read_ucblocks = atbm8830_read_ucblocks, +}; + +struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config, + struct i2c_adapter *i2c) +{ + struct atbm_state *priv = NULL; + u8 data = 0; + + dprintk("%s()\n", __func__); + + if (config == NULL || i2c == NULL) + return NULL; + + priv = kzalloc(sizeof(struct atbm_state), GFP_KERNEL); + if (priv == NULL) + goto error_out; + + priv->config = config; + priv->i2c = i2c; + + /* check if the demod is there */ + if (atbm8830_read_reg(priv, REG_CHIP_ID, &data) != 0) { + dprintk("%s atbm8830/8831 not found at i2c addr 0x%02X\n", + __func__, priv->config->demod_address); + goto error_out; + } + dprintk("atbm8830 chip id: 0x%02X\n", data); + + memcpy(&priv->frontend.ops, &atbm8830_ops, + sizeof(struct dvb_frontend_ops)); + priv->frontend.demodulator_priv = priv; + + atbm8830_init(&priv->frontend); + + atbm8830_i2c_gate_ctrl(&priv->frontend, 1); + + return &priv->frontend; + +error_out: + dprintk("%s() error_out\n", __func__); + kfree(priv); + return NULL; + +} +EXPORT_SYMBOL(atbm8830_attach); + +MODULE_DESCRIPTION("AltoBeam ATBM8830/8831 GB20600 demodulator driver"); +MODULE_AUTHOR("David T. L. Wong "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/atbm8830.h b/drivers/media/dvb-frontends/atbm8830.h new file mode 100644 index 00000000..8e0ac98f --- /dev/null +++ b/drivers/media/dvb-frontends/atbm8830.h @@ -0,0 +1,76 @@ +/* + * Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator + * ATBM8830, ATBM8831 + * + * Copyright (C) 2009 David T.L. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ATBM8830_H__ +#define __ATBM8830_H__ + +#include +#include +#include + +#define ATBM8830_PROD_8830 0 +#define ATBM8830_PROD_8831 1 + +struct atbm8830_config { + + /* product type */ + u8 prod; + + /* the demodulator's i2c address */ + u8 demod_address; + + /* parallel or serial transport stream */ + u8 serial_ts; + + /* transport stream clock output only when receiving valid stream */ + u8 ts_clk_gated; + + /* Decoder sample TS data at rising edge of clock */ + u8 ts_sampling_edge; + + /* Oscillator clock frequency */ + u32 osc_clk_freq; /* in kHz */ + + /* IF frequency */ + u32 if_freq; /* in kHz */ + + /* Swap I/Q for zero IF */ + u8 zif_swap_iq; + + /* Tuner AGC settings */ + u8 agc_min; + u8 agc_max; + u8 agc_hold_loop; +}; + +#if IS_ENABLED(CONFIG_DVB_ATBM8830) +extern struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config, + struct i2c_adapter *i2c); +#else +static inline +struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config, + struct i2c_adapter *i2c) { + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_ATBM8830 */ + +#endif /* __ATBM8830_H__ */ diff --git a/drivers/media/dvb-frontends/atbm8830_priv.h b/drivers/media/dvb-frontends/atbm8830_priv.h new file mode 100644 index 00000000..d460058d --- /dev/null +++ b/drivers/media/dvb-frontends/atbm8830_priv.h @@ -0,0 +1,75 @@ +/* + * Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator + * ATBM8830, ATBM8831 + * + * Copyright (C) 2009 David T.L. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ATBM8830_PRIV_H +#define __ATBM8830_PRIV_H + +struct atbm_state { + struct i2c_adapter *i2c; + /* configuration settings */ + const struct atbm8830_config *config; + struct dvb_frontend frontend; +}; + +#define REG_CHIP_ID 0x0000 +#define REG_TUNER_BASEBAND 0x0001 +#define REG_DEMOD_RUN 0x0004 +#define REG_DSP_RESET 0x0005 +#define REG_RAM_RESET 0x0006 +#define REG_ADC_RESET 0x0007 +#define REG_TSPORT_RESET 0x0008 +#define REG_BLKERR_POL 0x000C +#define REG_I2C_GATE 0x0103 +#define REG_TS_SAMPLE_EDGE 0x0301 +#define REG_TS_PKT_LEN_204 0x0302 +#define REG_TS_PKT_LEN_AUTO 0x0303 +#define REG_TS_SERIAL 0x0305 +#define REG_TS_CLK_FREERUN 0x0306 +#define REG_TS_VALID_MODE 0x0307 +#define REG_TS_CLK_MODE 0x030B /* 1 for serial, 0 for parallel */ + +#define REG_TS_ERRBIT_USE 0x030C +#define REG_LOCK_STATUS 0x030D +#define REG_ADC_CONFIG 0x0602 +#define REG_CARRIER_OFFSET 0x0827 /* 0x0827-0x0829 little endian */ +#define REG_DETECTED_PN_MODE 0x082D +#define REG_READ_LATCH 0x084D +#define REG_IF_FREQ 0x0A00 /* 0x0A00-0x0A02 little endian */ +#define REG_OSC_CLK 0x0A03 /* 0x0A03-0x0A05 little endian */ +#define REG_BYPASS_CCI 0x0A06 +#define REG_ANALOG_LUMA_DETECTED 0x0A25 +#define REG_ANALOG_AUDIO_DETECTED 0x0A26 +#define REG_ANALOG_CHROMA_DETECTED 0x0A39 +#define REG_FRAME_ERR_CNT 0x0B04 +#define REG_USE_EXT_ADC 0x0C00 +#define REG_SWAP_I_Q 0x0C01 +#define REG_TPS_MANUAL 0x0D01 +#define REG_TPS_CONFIG 0x0D02 +#define REG_BYPASS_DEINTERLEAVER 0x0E00 +#define REG_AGC_TARGET 0x1003 /* 0x1003-0x1005 little endian */ +#define REG_AGC_MIN 0x1020 +#define REG_AGC_MAX 0x1023 +#define REG_AGC_LOCK 0x1027 +#define REG_AGC_PWM_VAL 0x1028 /* 0x1028-0x1029 little endian */ +#define REG_AGC_HOLD_LOOP 0x1031 + +#endif + diff --git a/drivers/media/dvb-frontends/au8522.h b/drivers/media/dvb-frontends/au8522.h new file mode 100644 index 00000000..83fe9a61 --- /dev/null +++ b/drivers/media/dvb-frontends/au8522.h @@ -0,0 +1,98 @@ +/* + Auvitek AU8522 QAM/8VSB demodulator driver + + Copyright (C) 2008 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef __AU8522_H__ +#define __AU8522_H__ + +#include +#include + +enum au8522_if_freq { + AU8522_IF_6MHZ = 0, + AU8522_IF_4MHZ, + AU8522_IF_3_25MHZ, +}; + +struct au8522_led_config { + u16 vsb8_strong; + u16 qam64_strong; + u16 qam256_strong; + + u16 gpio_output; + /* unset hi bits, set low bits */ + u16 gpio_output_enable; + u16 gpio_output_disable; + + u16 gpio_leds; + u8 *led_states; + unsigned int num_led_states; +}; + +struct au8522_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* Return lock status based on tuner lock, or demod lock */ +#define AU8522_TUNERLOCKING 0 +#define AU8522_DEMODLOCKING 1 + u8 status_mode; + + struct au8522_led_config *led_cfg; + + enum au8522_if_freq vsb_if; + enum au8522_if_freq qam_if; +}; + +#if IS_ENABLED(CONFIG_DVB_AU8522_DTV) +extern struct dvb_frontend *au8522_attach(const struct au8522_config *config, + struct i2c_adapter *i2c); +#else +static inline +struct dvb_frontend *au8522_attach(const struct au8522_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_AU8522 */ + +/* Other modes may need to be added later */ +enum au8522_video_input { + AU8522_COMPOSITE_CH1 = 1, + AU8522_COMPOSITE_CH2, + AU8522_COMPOSITE_CH3, + AU8522_COMPOSITE_CH4, + AU8522_COMPOSITE_CH4_SIF, + AU8522_SVIDEO_CH13, + AU8522_SVIDEO_CH24, +}; + +enum au8522_audio_input { + AU8522_AUDIO_NONE, + AU8522_AUDIO_SIF, +}; + +#endif /* __AU8522_H__ */ + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/dvb-frontends/au8522_common.c b/drivers/media/dvb-frontends/au8522_common.c new file mode 100644 index 00000000..3559ff23 --- /dev/null +++ b/drivers/media/dvb-frontends/au8522_common.c @@ -0,0 +1,277 @@ +/* + Auvitek AU8522 QAM/8VSB demodulator driver + + Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Devin Heitmueller + Copyright (C) 2005-2008 Auvitek International, Ltd. + Copyright (C) 2012 Michael Krufky + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include "dvb_frontend.h" +#include "au8522_priv.h" + +static int debug; + +#define dprintk(arg...)\ + do { if (debug)\ + printk(arg);\ + } while (0) + +/* Despite the name "hybrid_tuner", the framework works just as well for + hybrid demodulators as well... */ +static LIST_HEAD(hybrid_tuner_instance_list); +static DEFINE_MUTEX(au8522_list_mutex); + +/* 16 bit registers, 8 bit values */ +int au8522_writereg(struct au8522_state *state, u16 reg, u8 data) +{ + int ret; + u8 buf[] = { (reg >> 8) | 0x80, reg & 0xff, data }; + + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = 0, .buf = buf, .len = 3 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} +EXPORT_SYMBOL(au8522_writereg); + +u8 au8522_readreg(struct au8522_state *state, u16 reg) +{ + int ret; + u8 b0[] = { (reg >> 8) | 0x40, reg & 0xff }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 2 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 1 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + return b1[0]; +} +EXPORT_SYMBOL(au8522_readreg); + +int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct au8522_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (state->operational_mode == AU8522_ANALOG_MODE) { + /* We're being asked to manage the gate even though we're + not in digital mode. This can occur if we get switched + over to analog mode before the dvb_frontend kernel thread + has completely shutdown */ + return 0; + } + + if (enable) + return au8522_writereg(state, 0x106, 1); + else + return au8522_writereg(state, 0x106, 0); +} +EXPORT_SYMBOL(au8522_i2c_gate_ctrl); + +int au8522_analog_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct au8522_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + return au8522_writereg(state, 0x106, 1); + else + return au8522_writereg(state, 0x106, 0); +} +EXPORT_SYMBOL(au8522_analog_i2c_gate_ctrl); + +/* Reset the demod hardware and reset all of the configuration registers + to a default state. */ +int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c, + u8 client_address) +{ + int ret; + + mutex_lock(&au8522_list_mutex); + ret = hybrid_tuner_request_state(struct au8522_state, (*state), + hybrid_tuner_instance_list, + i2c, client_address, "au8522"); + mutex_unlock(&au8522_list_mutex); + + return ret; +} +EXPORT_SYMBOL(au8522_get_state); + +void au8522_release_state(struct au8522_state *state) +{ + mutex_lock(&au8522_list_mutex); + if (state != NULL) + hybrid_tuner_release_state(state); + mutex_unlock(&au8522_list_mutex); +} +EXPORT_SYMBOL(au8522_release_state); + +static int au8522_led_gpio_enable(struct au8522_state *state, int onoff) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + u8 val; + + /* bail out if we can't control an LED */ + if (!led_config || !led_config->gpio_output || + !led_config->gpio_output_enable || !led_config->gpio_output_disable) + return 0; + + val = au8522_readreg(state, 0x4000 | + (led_config->gpio_output & ~0xc000)); + if (onoff) { + /* enable GPIO output */ + val &= ~((led_config->gpio_output_enable >> 8) & 0xff); + val |= (led_config->gpio_output_enable & 0xff); + } else { + /* disable GPIO output */ + val &= ~((led_config->gpio_output_disable >> 8) & 0xff); + val |= (led_config->gpio_output_disable & 0xff); + } + return au8522_writereg(state, 0x8000 | + (led_config->gpio_output & ~0xc000), val); +} + +/* led = 0 | off + * led = 1 | signal ok + * led = 2 | signal strong + * led < 0 | only light led if leds are currently off + */ +int au8522_led_ctrl(struct au8522_state *state, int led) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + int i, ret = 0; + + /* bail out if we can't control an LED */ + if (!led_config || !led_config->gpio_leds || + !led_config->num_led_states || !led_config->led_states) + return 0; + + if (led < 0) { + /* if LED is already lit, then leave it as-is */ + if (state->led_state) + return 0; + else + led *= -1; + } + + /* toggle LED if changing state */ + if (state->led_state != led) { + u8 val; + + dprintk("%s: %d\n", __func__, led); + + au8522_led_gpio_enable(state, 1); + + val = au8522_readreg(state, 0x4000 | + (led_config->gpio_leds & ~0xc000)); + + /* start with all leds off */ + for (i = 0; i < led_config->num_led_states; i++) + val &= ~led_config->led_states[i]; + + /* set selected LED state */ + if (led < led_config->num_led_states) + val |= led_config->led_states[led]; + else if (led_config->num_led_states) + val |= + led_config->led_states[led_config->num_led_states - 1]; + + ret = au8522_writereg(state, 0x8000 | + (led_config->gpio_leds & ~0xc000), val); + if (ret < 0) + return ret; + + state->led_state = led; + + if (led == 0) + au8522_led_gpio_enable(state, 0); + } + + return 0; +} +EXPORT_SYMBOL(au8522_led_ctrl); + +int au8522_init(struct dvb_frontend *fe) +{ + struct au8522_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + + state->operational_mode = AU8522_DIGITAL_MODE; + + /* Clear out any state associated with the digital side of the + chip, so that when it gets powered back up it won't think + that it is already tuned */ + state->current_frequency = 0; + + au8522_writereg(state, 0xa4, 1 << 5); + + au8522_i2c_gate_ctrl(fe, 1); + + return 0; +} +EXPORT_SYMBOL(au8522_init); + +int au8522_sleep(struct dvb_frontend *fe) +{ + struct au8522_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + + /* Only power down if the digital side is currently using the chip */ + if (state->operational_mode == AU8522_ANALOG_MODE) { + /* We're not in one of the expected power modes, which means + that the DVB thread is probably telling us to go to sleep + even though the analog frontend has already started using + the chip. So ignore the request */ + return 0; + } + + /* turn off led */ + au8522_led_ctrl(state, 0); + + /* Power down the chip */ + au8522_writereg(state, 0xa4, 1 << 5); + + state->current_frequency = 0; + + return 0; +} +EXPORT_SYMBOL(au8522_sleep); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/au8522_decoder.c b/drivers/media/dvb-frontends/au8522_decoder.c new file mode 100644 index 00000000..2099f21e --- /dev/null +++ b/drivers/media/dvb-frontends/au8522_decoder.c @@ -0,0 +1,790 @@ +/* + * Auvitek AU8522 QAM/8VSB demodulator driver and video decoder + * + * Copyright (C) 2009 Devin Heitmueller + * Copyright (C) 2005-2008 Auvitek International, Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * As published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +/* Developer notes: + * + * VBI support is not yet working + * Enough is implemented here for CVBS and S-Video inputs, but the actual + * analog demodulator code isn't implemented (not needed for xc5000 since it + * has its own demodulator and outputs CVBS) + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "au8522.h" +#include "au8522_priv.h" + +MODULE_AUTHOR("Devin Heitmueller"); +MODULE_LICENSE("GPL"); + +static int au8522_analog_debug; + + +module_param_named(analog_debug, au8522_analog_debug, int, 0644); + +MODULE_PARM_DESC(analog_debug, + "Analog debugging messages [0=Off (default) 1=On]"); + +struct au8522_register_config { + u16 reg_name; + u8 reg_val[8]; +}; + + +/* Video Decoder Filter Coefficients + The values are as follows from left to right + 0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13" +*/ +static const struct au8522_register_config filter_coef[] = { + {AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} }, + {AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} }, + {AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} }, + {AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} }, + {AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} }, + {AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} }, + {AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} }, + {AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} }, + {AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} }, + {AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} }, + {AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} }, + {AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} }, + {AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} }, + {AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} }, + {AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} }, + {AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} }, + {AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} }, + {AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} }, + {AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} }, + {AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} }, + {AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} }, + {AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} }, + +}; +#define NUM_FILTER_COEF (sizeof(filter_coef)\ + / sizeof(struct au8522_register_config)) + + +/* Registers 0x060b through 0x0652 are the LP Filter coefficients + The values are as follows from left to right + 0="SIF" 1="ATVRF/ATVRF13" + Note: the "ATVRF/ATVRF13" mode has never been tested +*/ +static const struct au8522_register_config lpfilter_coef[] = { + {0x060b, {0x21, 0x0b} }, + {0x060c, {0xad, 0xad} }, + {0x060d, {0x70, 0xf0} }, + {0x060e, {0xea, 0xe9} }, + {0x060f, {0xdd, 0xdd} }, + {0x0610, {0x08, 0x64} }, + {0x0611, {0x60, 0x60} }, + {0x0612, {0xf8, 0xb2} }, + {0x0613, {0x01, 0x02} }, + {0x0614, {0xe4, 0xb4} }, + {0x0615, {0x19, 0x02} }, + {0x0616, {0xae, 0x2e} }, + {0x0617, {0xee, 0xc5} }, + {0x0618, {0x56, 0x56} }, + {0x0619, {0x30, 0x58} }, + {0x061a, {0xf9, 0xf8} }, + {0x061b, {0x24, 0x64} }, + {0x061c, {0x07, 0x07} }, + {0x061d, {0x30, 0x30} }, + {0x061e, {0xa9, 0xed} }, + {0x061f, {0x09, 0x0b} }, + {0x0620, {0x42, 0xc2} }, + {0x0621, {0x1d, 0x2a} }, + {0x0622, {0xd6, 0x56} }, + {0x0623, {0x95, 0x8b} }, + {0x0624, {0x2b, 0x2b} }, + {0x0625, {0x30, 0x24} }, + {0x0626, {0x3e, 0x3e} }, + {0x0627, {0x62, 0xe2} }, + {0x0628, {0xe9, 0xf5} }, + {0x0629, {0x99, 0x19} }, + {0x062a, {0xd4, 0x11} }, + {0x062b, {0x03, 0x04} }, + {0x062c, {0xb5, 0x85} }, + {0x062d, {0x1e, 0x20} }, + {0x062e, {0x2a, 0xea} }, + {0x062f, {0xd7, 0xd2} }, + {0x0630, {0x15, 0x15} }, + {0x0631, {0xa3, 0xa9} }, + {0x0632, {0x1f, 0x1f} }, + {0x0633, {0xf9, 0xd1} }, + {0x0634, {0xc0, 0xc3} }, + {0x0635, {0x4d, 0x8d} }, + {0x0636, {0x21, 0x31} }, + {0x0637, {0x83, 0x83} }, + {0x0638, {0x08, 0x8c} }, + {0x0639, {0x19, 0x19} }, + {0x063a, {0x45, 0xa5} }, + {0x063b, {0xef, 0xec} }, + {0x063c, {0x8a, 0x8a} }, + {0x063d, {0xf4, 0xf6} }, + {0x063e, {0x8f, 0x8f} }, + {0x063f, {0x44, 0x0c} }, + {0x0640, {0xef, 0xf0} }, + {0x0641, {0x66, 0x66} }, + {0x0642, {0xcc, 0xd2} }, + {0x0643, {0x41, 0x41} }, + {0x0644, {0x63, 0x93} }, + {0x0645, {0x8e, 0x8e} }, + {0x0646, {0xa2, 0x42} }, + {0x0647, {0x7b, 0x7b} }, + {0x0648, {0x04, 0x04} }, + {0x0649, {0x00, 0x00} }, + {0x064a, {0x40, 0x40} }, + {0x064b, {0x8c, 0x98} }, + {0x064c, {0x00, 0x00} }, + {0x064d, {0x63, 0xc3} }, + {0x064e, {0x04, 0x04} }, + {0x064f, {0x20, 0x20} }, + {0x0650, {0x00, 0x00} }, + {0x0651, {0x40, 0x40} }, + {0x0652, {0x01, 0x01} }, +}; +#define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\ + / sizeof(struct au8522_register_config)) + +static inline struct au8522_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct au8522_state, sd); +} + +static void setup_vbi(struct au8522_state *state, int aud_input) +{ + int i; + + /* These are set to zero regardless of what mode we're in */ + au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_L_REG018H, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_TOTAL_BITS_REG019H, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_H_REG01AH, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_L_REG01BH, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_THRESH1_REG01CH, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT2_REG01EH, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT1_REG01FH, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT0_REG020H, 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H, + 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H, + 0x00); + au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H, + 0x00); + + /* Setup the VBI registers */ + for (i = 0x30; i < 0x60; i++) + au8522_writereg(state, i, 0x40); + + /* For some reason, every register is 0x40 except register 0x44 + (confirmed via the HVR-950q USB capture) */ + au8522_writereg(state, 0x44, 0x60); + + /* Enable VBI (we always do this regardless of whether the user is + viewing closed caption info) */ + au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H, + AU8522_TVDEC_VBI_CTRL_H_REG017H_CCON); + +} + +static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode) +{ + int i; + int filter_coef_type; + + /* Provide reasonable defaults for picture tuning values */ + au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07); + au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed); + au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79); + au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80); + au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80); + au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00); + au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00); + + /* Other decoder registers */ + au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00); + + if (input_mode == 0x23) { + /* S-Video input mapping */ + au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x04); + } else { + /* All other modes (CVBS/ATVRF etc.) */ + au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x00); + } + + au8522_writereg(state, AU8522_TVDEC_PGA_REG012H, + AU8522_TVDEC_PGA_REG012H_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_MODE_REG015H, + AU8522_TVDEC_COMB_MODE_REG015H_CVBS); + au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H, + AU8522_TVDED_DBG_MODE_REG060H_CVBS); + au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H, + AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 | + AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 | + AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN); + au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H, + AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC); + au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H, + AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS); + au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H, + AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR1_REG065H, + AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR2_REG066H, + AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR3_REG067H, + AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_NOTCH_THR_REG068H, + AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR1_REG069H, + AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR2_REG06AH, + AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH, + AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS); + if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 || + input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) { + au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH, + AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO); + au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH, + AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO); + } else { + au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH, + AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH, + AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS); + } + au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH, + AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS); + au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH, + AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H, + AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS); + au8522_writereg(state, AU8522_REG071H, AU8522_REG071H_CVBS); + au8522_writereg(state, AU8522_REG072H, AU8522_REG072H_CVBS); + au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H, + AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS); + au8522_writereg(state, AU8522_REG074H, AU8522_REG074H_CVBS); + au8522_writereg(state, AU8522_REG075H, AU8522_REG075H_CVBS); + au8522_writereg(state, AU8522_TVDEC_DCAGC_CTRL_REG077H, + AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS); + au8522_writereg(state, AU8522_TVDEC_PIC_START_ADJ_REG078H, + AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS); + au8522_writereg(state, AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H, + AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS); + au8522_writereg(state, AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH, + AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS); + au8522_writereg(state, AU8522_TVDEC_INTRP_CTRL_REG07BH, + AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS); + au8522_writereg(state, AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H, + AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS); + au8522_writereg(state, AU8522_TOREGAAGC_REG0E5H, + AU8522_TOREGAAGC_REG0E5H_CVBS); + au8522_writereg(state, AU8522_REG016H, AU8522_REG016H_CVBS); + + setup_vbi(state, 0); + + if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 || + input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) { + /* Despite what the table says, for the HVR-950q we still need + to be in CVBS mode for the S-Video input (reason unknown). */ + /* filter_coef_type = 3; */ + filter_coef_type = 5; + } else { + filter_coef_type = 5; + } + + /* Load the Video Decoder Filter Coefficients */ + for (i = 0; i < NUM_FILTER_COEF; i++) { + au8522_writereg(state, filter_coef[i].reg_name, + filter_coef[i].reg_val[filter_coef_type]); + } + + /* It's not clear what these registers are for, but they are always + set to the same value regardless of what mode we're in */ + au8522_writereg(state, AU8522_REG42EH, 0x87); + au8522_writereg(state, AU8522_REG42FH, 0xa2); + au8522_writereg(state, AU8522_REG430H, 0xbf); + au8522_writereg(state, AU8522_REG431H, 0xcb); + au8522_writereg(state, AU8522_REG432H, 0xa1); + au8522_writereg(state, AU8522_REG433H, 0x41); + au8522_writereg(state, AU8522_REG434H, 0x88); + au8522_writereg(state, AU8522_REG435H, 0xc2); + au8522_writereg(state, AU8522_REG436H, 0x3c); +} + +static void au8522_setup_cvbs_mode(struct au8522_state *state) +{ + /* here we're going to try the pre-programmed route */ + au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, + AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS); + + /* PGA in automatic mode */ + au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); + + /* Enable clamping control */ + au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00); + + au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, + AU8522_INPUT_CONTROL_REG081H_CVBS_CH1); + + setup_decoder_defaults(state, AU8522_INPUT_CONTROL_REG081H_CVBS_CH1); + + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, + AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); +} + +static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state) +{ + /* here we're going to try the pre-programmed route */ + au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, + AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS); + + /* It's not clear why we have to have the PGA in automatic mode while + enabling clamp control, but it's what Windows does */ + au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); + + /* Enable clamping control */ + au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e); + + /* Disable automatic PGA (since the CVBS is coming from the tuner) */ + au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10); + + /* Set input mode to CVBS on channel 4 with SIF audio input enabled */ + au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, + AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF); + + setup_decoder_defaults(state, + AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF); + + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, + AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); +} + +static void au8522_setup_svideo_mode(struct au8522_state *state) +{ + au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, + AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO); + + /* Set input to Y on Channe1, C on Channel 3 */ + au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, + AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13); + + /* PGA in automatic mode */ + au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); + + /* Enable clamping control */ + au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00); + + setup_decoder_defaults(state, + AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13); + + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, + AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); +} + +/* ----------------------------------------------------------------------- */ + +static void disable_audio_input(struct au8522_state *state) +{ + au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00); + au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00); + au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00); + + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04); + au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02); + + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, + AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO); +} + +/* 0=disable, 1=SIF */ +static void set_audio_input(struct au8522_state *state, int aud_input) +{ + int i; + + /* Note that this function needs to be used in conjunction with setting + the input routing via register 0x81 */ + + if (aud_input == AU8522_AUDIO_NONE) { + disable_audio_input(state); + return; + } + + if (aud_input != AU8522_AUDIO_SIF) { + /* The caller asked for a mode we don't currently support */ + printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n", + aud_input); + return; + } + + /* Load the Audio Decoder Filter Coefficients */ + for (i = 0; i < NUM_LPFILTER_COEF; i++) { + au8522_writereg(state, lpfilter_coef[i].reg_name, + lpfilter_coef[i].reg_val[0]); + } + + /* Setup audio */ + au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00); + au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00); + au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00); + au8522_writereg(state, AU8522_I2C_CONTROL_REG1_REG091H, 0x80); + au8522_writereg(state, AU8522_I2C_CONTROL_REG0_REG090H, 0x84); + msleep(150); + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x00); + msleep(1); + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d); + msleep(50); + au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); + au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); + au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff); + msleep(80); + au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); + au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); + au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO); + au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82); + msleep(70); + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09); + au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03); + au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2); +} + +/* ----------------------------------------------------------------------- */ + +static int au8522_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct au8522_state *state = + container_of(ctrl->handler, struct au8522_state, hdl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, + ctrl->val - 128); + break; + case V4L2_CID_CONTRAST: + au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, + ctrl->val); + break; + case V4L2_CID_SATURATION: + au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, + ctrl->val); + au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, + ctrl->val); + break; + case V4L2_CID_HUE: + au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, + ctrl->val >> 8); + au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, + ctrl->val & 0xFF); + break; + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int au8522_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct au8522_state *state = to_state(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = au8522_readreg(state, reg->reg & 0xffff); + return 0; +} + +static int au8522_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct au8522_state *state = to_state(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + au8522_writereg(state, reg->reg, reg->val & 0xff); + return 0; +} +#endif + +static int au8522_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct au8522_state *state = to_state(sd); + + if (enable) { + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, + 0x01); + msleep(1); + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, + AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); + } else { + /* This does not completely power down the device + (it only reduces it from around 140ma to 80ma) */ + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, + 1 << 5); + } + return 0; +} + +static int au8522_reset(struct v4l2_subdev *sd, u32 val) +{ + struct au8522_state *state = to_state(sd); + + state->operational_mode = AU8522_ANALOG_MODE; + + /* Clear out any state associated with the digital side of the + chip, so that when it gets powered back up it won't think + that it is already tuned */ + state->current_frequency = 0; + + au8522_writereg(state, 0xa4, 1 << 5); + + return 0; +} + +static int au8522_s_video_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct au8522_state *state = to_state(sd); + + au8522_reset(sd, 0); + + if (input == AU8522_COMPOSITE_CH1) { + au8522_setup_cvbs_mode(state); + } else if (input == AU8522_SVIDEO_CH13) { + au8522_setup_svideo_mode(state); + } else if (input == AU8522_COMPOSITE_CH4_SIF) { + au8522_setup_cvbs_tuner_mode(state); + } else { + printk(KERN_ERR "au8522 mode not currently supported\n"); + return -EINVAL; + } + return 0; +} + +static int au8522_s_audio_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct au8522_state *state = to_state(sd); + set_audio_input(state, input); + return 0; +} + +static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + int val = 0; + struct au8522_state *state = to_state(sd); + u8 lock_status; + + /* Interrogate the decoder to see if we are getting a real signal */ + lock_status = au8522_readreg(state, 0x00); + if (lock_status == 0xa2) + vt->signal = 0xffff; + else + vt->signal = 0x00; + + vt->capability |= + V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; + + val = V4L2_TUNER_SUB_MONO; + vt->rxsubchans = val; + vt->audmode = V4L2_TUNER_MODE_STEREO; + return 0; +} + +static int au8522_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct au8522_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops au8522_core_ops = { + .log_status = v4l2_ctrl_subdev_log_status, + .g_chip_ident = au8522_g_chip_ident, + .reset = au8522_reset, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = au8522_g_register, + .s_register = au8522_s_register, +#endif +}; + +static const struct v4l2_subdev_tuner_ops au8522_tuner_ops = { + .g_tuner = au8522_g_tuner, +}; + +static const struct v4l2_subdev_audio_ops au8522_audio_ops = { + .s_routing = au8522_s_audio_routing, +}; + +static const struct v4l2_subdev_video_ops au8522_video_ops = { + .s_routing = au8522_s_video_routing, + .s_stream = au8522_s_stream, +}; + +static const struct v4l2_subdev_ops au8522_ops = { + .core = &au8522_core_ops, + .tuner = &au8522_tuner_ops, + .audio = &au8522_audio_ops, + .video = &au8522_video_ops, +}; + +static const struct v4l2_ctrl_ops au8522_ctrl_ops = { + .s_ctrl = au8522_s_ctrl, +}; + +/* ----------------------------------------------------------------------- */ + +static int au8522_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct au8522_state *state; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + int instance; + struct au8522_config *demod_config; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + return -EIO; + } + + /* allocate memory for the internal state */ + instance = au8522_get_state(&state, client->adapter, client->addr); + switch (instance) { + case 0: + printk(KERN_ERR "au8522_decoder allocation failed\n"); + return -EIO; + case 1: + /* new demod instance */ + printk(KERN_INFO "au8522_decoder creating new instance...\n"); + break; + default: + /* existing demod instance */ + printk(KERN_INFO "au8522_decoder attach existing instance.\n"); + break; + } + + demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL); + if (demod_config == NULL) { + if (instance == 1) + kfree(state); + return -ENOMEM; + } + demod_config->demod_address = 0x8e >> 1; + + state->config = demod_config; + state->i2c = client->adapter; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &au8522_ops); + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 109); + v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, + AU8522_TVDEC_CONTRAST_REG00BH_CVBS); + v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops, + V4L2_CID_HUE, -32768, 32767, 1, 0); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(demod_config); + kfree(state); + return err; + } + + state->c = client; + state->vid_input = AU8522_COMPOSITE_CH1; + state->aud_input = AU8522_AUDIO_NONE; + state->id = 8522; + state->rev = 0; + + /* Jam open the i2c gate to the tuner */ + au8522_writereg(state, 0x106, 1); + + return 0; +} + +static int au8522_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + au8522_release_state(to_state(sd)); + return 0; +} + +static const struct i2c_device_id au8522_id[] = { + {"au8522", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, au8522_id); + +static struct i2c_driver au8522_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "au8522", + }, + .probe = au8522_probe, + .remove = au8522_remove, + .id_table = au8522_id, +}; + +module_i2c_driver(au8522_driver); diff --git a/drivers/media/dvb-frontends/au8522_dig.c b/drivers/media/dvb-frontends/au8522_dig.c new file mode 100644 index 00000000..a68974f6 --- /dev/null +++ b/drivers/media/dvb-frontends/au8522_dig.c @@ -0,0 +1,828 @@ +/* + Auvitek AU8522 QAM/8VSB demodulator driver + + Copyright (C) 2008 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "au8522.h" +#include "au8522_priv.h" + +static int debug; + +#define dprintk(arg...)\ + do { if (debug)\ + printk(arg);\ + } while (0) + +struct mse2snr_tab { + u16 val; + u16 data; +}; + +/* VSB SNR lookup table */ +static struct mse2snr_tab vsb_mse2snr_tab[] = { + { 0, 270 }, + { 2, 250 }, + { 3, 240 }, + { 5, 230 }, + { 7, 220 }, + { 9, 210 }, + { 12, 200 }, + { 13, 195 }, + { 15, 190 }, + { 17, 185 }, + { 19, 180 }, + { 21, 175 }, + { 24, 170 }, + { 27, 165 }, + { 31, 160 }, + { 32, 158 }, + { 33, 156 }, + { 36, 152 }, + { 37, 150 }, + { 39, 148 }, + { 40, 146 }, + { 41, 144 }, + { 43, 142 }, + { 44, 140 }, + { 48, 135 }, + { 50, 130 }, + { 43, 142 }, + { 53, 125 }, + { 56, 120 }, + { 256, 115 }, +}; + +/* QAM64 SNR lookup table */ +static struct mse2snr_tab qam64_mse2snr_tab[] = { + { 15, 0 }, + { 16, 290 }, + { 17, 288 }, + { 18, 286 }, + { 19, 284 }, + { 20, 282 }, + { 21, 281 }, + { 22, 279 }, + { 23, 277 }, + { 24, 275 }, + { 25, 273 }, + { 26, 271 }, + { 27, 269 }, + { 28, 268 }, + { 29, 266 }, + { 30, 264 }, + { 31, 262 }, + { 32, 260 }, + { 33, 259 }, + { 34, 258 }, + { 35, 256 }, + { 36, 255 }, + { 37, 254 }, + { 38, 252 }, + { 39, 251 }, + { 40, 250 }, + { 41, 249 }, + { 42, 248 }, + { 43, 246 }, + { 44, 245 }, + { 45, 244 }, + { 46, 242 }, + { 47, 241 }, + { 48, 240 }, + { 50, 239 }, + { 51, 238 }, + { 53, 237 }, + { 54, 236 }, + { 56, 235 }, + { 57, 234 }, + { 59, 233 }, + { 60, 232 }, + { 62, 231 }, + { 63, 230 }, + { 65, 229 }, + { 67, 228 }, + { 68, 227 }, + { 70, 226 }, + { 71, 225 }, + { 73, 224 }, + { 74, 223 }, + { 76, 222 }, + { 78, 221 }, + { 80, 220 }, + { 82, 219 }, + { 85, 218 }, + { 88, 217 }, + { 90, 216 }, + { 92, 215 }, + { 93, 214 }, + { 94, 212 }, + { 95, 211 }, + { 97, 210 }, + { 99, 209 }, + { 101, 208 }, + { 102, 207 }, + { 104, 206 }, + { 107, 205 }, + { 111, 204 }, + { 114, 203 }, + { 118, 202 }, + { 122, 201 }, + { 125, 200 }, + { 128, 199 }, + { 130, 198 }, + { 132, 197 }, + { 256, 190 }, +}; + +/* QAM256 SNR lookup table */ +static struct mse2snr_tab qam256_mse2snr_tab[] = { + { 15, 0 }, + { 16, 400 }, + { 17, 398 }, + { 18, 396 }, + { 19, 394 }, + { 20, 392 }, + { 21, 390 }, + { 22, 388 }, + { 23, 386 }, + { 24, 384 }, + { 25, 382 }, + { 26, 380 }, + { 27, 379 }, + { 28, 378 }, + { 29, 377 }, + { 30, 376 }, + { 31, 375 }, + { 32, 374 }, + { 33, 373 }, + { 34, 372 }, + { 35, 371 }, + { 36, 370 }, + { 37, 362 }, + { 38, 354 }, + { 39, 346 }, + { 40, 338 }, + { 41, 330 }, + { 42, 328 }, + { 43, 326 }, + { 44, 324 }, + { 45, 322 }, + { 46, 320 }, + { 47, 319 }, + { 48, 318 }, + { 49, 317 }, + { 50, 316 }, + { 51, 315 }, + { 52, 314 }, + { 53, 313 }, + { 54, 312 }, + { 55, 311 }, + { 56, 310 }, + { 57, 308 }, + { 58, 306 }, + { 59, 304 }, + { 60, 302 }, + { 61, 300 }, + { 62, 298 }, + { 65, 295 }, + { 68, 294 }, + { 70, 293 }, + { 73, 292 }, + { 76, 291 }, + { 78, 290 }, + { 79, 289 }, + { 81, 288 }, + { 82, 287 }, + { 83, 286 }, + { 84, 285 }, + { 85, 284 }, + { 86, 283 }, + { 88, 282 }, + { 89, 281 }, + { 256, 280 }, +}; + +static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse, + u16 *snr) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < sz; i++) { + if (mse < tab[i].val) { + *snr = tab[i].data; + ret = 0; + break; + } + } + dprintk("%s() snr=%d\n", __func__, *snr); + return ret; +} + +static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq) +{ + struct au8522_state *state = fe->demodulator_priv; + u8 r0b5, r0b6, r0b7; + char *ifmhz; + + switch (if_freq) { + case AU8522_IF_3_25MHZ: + ifmhz = "3.25"; + r0b5 = 0x00; + r0b6 = 0x3d; + r0b7 = 0xa0; + break; + case AU8522_IF_4MHZ: + ifmhz = "4.00"; + r0b5 = 0x00; + r0b6 = 0x4b; + r0b7 = 0xd9; + break; + case AU8522_IF_6MHZ: + ifmhz = "6.00"; + r0b5 = 0xfb; + r0b6 = 0x8e; + r0b7 = 0x39; + break; + default: + dprintk("%s() IF Frequency not supported\n", __func__); + return -EINVAL; + } + dprintk("%s() %s MHz\n", __func__, ifmhz); + au8522_writereg(state, 0x80b5, r0b5); + au8522_writereg(state, 0x80b6, r0b6); + au8522_writereg(state, 0x80b7, r0b7); + + return 0; +} + +/* VSB Modulation table */ +static struct { + u16 reg; + u16 data; +} VSB_mod_tab[] = { + { 0x8090, 0x84 }, + { 0x4092, 0x11 }, + { 0x2005, 0x00 }, + { 0x8091, 0x80 }, + { 0x80a3, 0x0c }, + { 0x80a4, 0xe8 }, + { 0x8081, 0xc4 }, + { 0x80a5, 0x40 }, + { 0x80a7, 0x40 }, + { 0x80a6, 0x67 }, + { 0x8262, 0x20 }, + { 0x821c, 0x30 }, + { 0x80d8, 0x1a }, + { 0x8227, 0xa0 }, + { 0x8121, 0xff }, + { 0x80a8, 0xf0 }, + { 0x80a9, 0x05 }, + { 0x80aa, 0x77 }, + { 0x80ab, 0xf0 }, + { 0x80ac, 0x05 }, + { 0x80ad, 0x77 }, + { 0x80ae, 0x41 }, + { 0x80af, 0x66 }, + { 0x821b, 0xcc }, + { 0x821d, 0x80 }, + { 0x80a4, 0xe8 }, + { 0x8231, 0x13 }, +}; + +/* QAM64 Modulation table */ +static struct { + u16 reg; + u16 data; +} QAM64_mod_tab[] = { + { 0x00a3, 0x09 }, + { 0x00a4, 0x00 }, + { 0x0081, 0xc4 }, + { 0x00a5, 0x40 }, + { 0x00aa, 0x77 }, + { 0x00ad, 0x77 }, + { 0x00a6, 0x67 }, + { 0x0262, 0x20 }, + { 0x021c, 0x30 }, + { 0x00b8, 0x3e }, + { 0x00b9, 0xf0 }, + { 0x00ba, 0x01 }, + { 0x00bb, 0x18 }, + { 0x00bc, 0x50 }, + { 0x00bd, 0x00 }, + { 0x00be, 0xea }, + { 0x00bf, 0xef }, + { 0x00c0, 0xfc }, + { 0x00c1, 0xbd }, + { 0x00c2, 0x1f }, + { 0x00c3, 0xfc }, + { 0x00c4, 0xdd }, + { 0x00c5, 0xaf }, + { 0x00c6, 0x00 }, + { 0x00c7, 0x38 }, + { 0x00c8, 0x30 }, + { 0x00c9, 0x05 }, + { 0x00ca, 0x4a }, + { 0x00cb, 0xd0 }, + { 0x00cc, 0x01 }, + { 0x00cd, 0xd9 }, + { 0x00ce, 0x6f }, + { 0x00cf, 0xf9 }, + { 0x00d0, 0x70 }, + { 0x00d1, 0xdf }, + { 0x00d2, 0xf7 }, + { 0x00d3, 0xc2 }, + { 0x00d4, 0xdf }, + { 0x00d5, 0x02 }, + { 0x00d6, 0x9a }, + { 0x00d7, 0xd0 }, + { 0x0250, 0x0d }, + { 0x0251, 0xcd }, + { 0x0252, 0xe0 }, + { 0x0253, 0x05 }, + { 0x0254, 0xa7 }, + { 0x0255, 0xff }, + { 0x0256, 0xed }, + { 0x0257, 0x5b }, + { 0x0258, 0xae }, + { 0x0259, 0xe6 }, + { 0x025a, 0x3d }, + { 0x025b, 0x0f }, + { 0x025c, 0x0d }, + { 0x025d, 0xea }, + { 0x025e, 0xf2 }, + { 0x025f, 0x51 }, + { 0x0260, 0xf5 }, + { 0x0261, 0x06 }, + { 0x021a, 0x00 }, + { 0x0546, 0x40 }, + { 0x0210, 0xc7 }, + { 0x0211, 0xaa }, + { 0x0212, 0xab }, + { 0x0213, 0x02 }, + { 0x0502, 0x00 }, + { 0x0121, 0x04 }, + { 0x0122, 0x04 }, + { 0x052e, 0x10 }, + { 0x00a4, 0xca }, + { 0x00a7, 0x40 }, + { 0x0526, 0x01 }, +}; + +/* QAM256 Modulation table */ +static struct { + u16 reg; + u16 data; +} QAM256_mod_tab[] = { + { 0x80a3, 0x09 }, + { 0x80a4, 0x00 }, + { 0x8081, 0xc4 }, + { 0x80a5, 0x40 }, + { 0x80aa, 0x77 }, + { 0x80ad, 0x77 }, + { 0x80a6, 0x67 }, + { 0x8262, 0x20 }, + { 0x821c, 0x30 }, + { 0x80b8, 0x3e }, + { 0x80b9, 0xf0 }, + { 0x80ba, 0x01 }, + { 0x80bb, 0x18 }, + { 0x80bc, 0x50 }, + { 0x80bd, 0x00 }, + { 0x80be, 0xea }, + { 0x80bf, 0xef }, + { 0x80c0, 0xfc }, + { 0x80c1, 0xbd }, + { 0x80c2, 0x1f }, + { 0x80c3, 0xfc }, + { 0x80c4, 0xdd }, + { 0x80c5, 0xaf }, + { 0x80c6, 0x00 }, + { 0x80c7, 0x38 }, + { 0x80c8, 0x30 }, + { 0x80c9, 0x05 }, + { 0x80ca, 0x4a }, + { 0x80cb, 0xd0 }, + { 0x80cc, 0x01 }, + { 0x80cd, 0xd9 }, + { 0x80ce, 0x6f }, + { 0x80cf, 0xf9 }, + { 0x80d0, 0x70 }, + { 0x80d1, 0xdf }, + { 0x80d2, 0xf7 }, + { 0x80d3, 0xc2 }, + { 0x80d4, 0xdf }, + { 0x80d5, 0x02 }, + { 0x80d6, 0x9a }, + { 0x80d7, 0xd0 }, + { 0x8250, 0x0d }, + { 0x8251, 0xcd }, + { 0x8252, 0xe0 }, + { 0x8253, 0x05 }, + { 0x8254, 0xa7 }, + { 0x8255, 0xff }, + { 0x8256, 0xed }, + { 0x8257, 0x5b }, + { 0x8258, 0xae }, + { 0x8259, 0xe6 }, + { 0x825a, 0x3d }, + { 0x825b, 0x0f }, + { 0x825c, 0x0d }, + { 0x825d, 0xea }, + { 0x825e, 0xf2 }, + { 0x825f, 0x51 }, + { 0x8260, 0xf5 }, + { 0x8261, 0x06 }, + { 0x821a, 0x00 }, + { 0x8546, 0x40 }, + { 0x8210, 0x26 }, + { 0x8211, 0xf6 }, + { 0x8212, 0x84 }, + { 0x8213, 0x02 }, + { 0x8502, 0x01 }, + { 0x8121, 0x04 }, + { 0x8122, 0x04 }, + { 0x852e, 0x10 }, + { 0x80a4, 0xca }, + { 0x80a7, 0x40 }, + { 0x8526, 0x01 }, +}; + +static int au8522_enable_modulation(struct dvb_frontend *fe, + fe_modulation_t m) +{ + struct au8522_state *state = fe->demodulator_priv; + int i; + + dprintk("%s(0x%08x)\n", __func__, m); + + switch (m) { + case VSB_8: + dprintk("%s() VSB_8\n", __func__); + for (i = 0; i < ARRAY_SIZE(VSB_mod_tab); i++) + au8522_writereg(state, + VSB_mod_tab[i].reg, + VSB_mod_tab[i].data); + au8522_set_if(fe, state->config->vsb_if); + break; + case QAM_64: + dprintk("%s() QAM 64\n", __func__); + for (i = 0; i < ARRAY_SIZE(QAM64_mod_tab); i++) + au8522_writereg(state, + QAM64_mod_tab[i].reg, + QAM64_mod_tab[i].data); + au8522_set_if(fe, state->config->qam_if); + break; + case QAM_256: + dprintk("%s() QAM 256\n", __func__); + for (i = 0; i < ARRAY_SIZE(QAM256_mod_tab); i++) + au8522_writereg(state, + QAM256_mod_tab[i].reg, + QAM256_mod_tab[i].data); + au8522_set_if(fe, state->config->qam_if); + break; + default: + dprintk("%s() Invalid modulation\n", __func__); + return -EINVAL; + } + + state->current_modulation = m; + + return 0; +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int au8522_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct au8522_state *state = fe->demodulator_priv; + int ret = -EINVAL; + + dprintk("%s(frequency=%d)\n", __func__, c->frequency); + + if ((state->current_frequency == c->frequency) && + (state->current_modulation == c->modulation)) + return 0; + + if (fe->ops.tuner_ops.set_params) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + ret = fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + if (ret < 0) + return ret; + + /* Allow the tuner to settle */ + msleep(100); + + au8522_enable_modulation(fe, c->modulation); + + state->current_frequency = c->frequency; + + return 0; +} + +static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct au8522_state *state = fe->demodulator_priv; + u8 reg; + u32 tuner_status = 0; + + *status = 0; + + if (state->current_modulation == VSB_8) { + dprintk("%s() Checking VSB_8\n", __func__); + reg = au8522_readreg(state, 0x4088); + if ((reg & 0x03) == 0x03) + *status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI; + } else { + dprintk("%s() Checking QAM\n", __func__); + reg = au8522_readreg(state, 0x4541); + if (reg & 0x80) + *status |= FE_HAS_VITERBI; + if (reg & 0x20) + *status |= FE_HAS_LOCK | FE_HAS_SYNC; + } + + switch (state->config->status_mode) { + case AU8522_DEMODLOCKING: + dprintk("%s() DEMODLOCKING\n", __func__); + if (*status & FE_HAS_VITERBI) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + case AU8522_TUNERLOCKING: + /* Get the tuner status */ + dprintk("%s() TUNERLOCKING\n", __func__); + if (fe->ops.tuner_ops.get_status) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.get_status(fe, &tuner_status); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + if (tuner_status) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + } + state->fe_status = *status; + + if (*status & FE_HAS_LOCK) + /* turn on LED, if it isn't on already */ + au8522_led_ctrl(state, -1); + else + /* turn off LED */ + au8522_led_ctrl(state, 0); + + dprintk("%s() status 0x%08x\n", __func__, *status); + + return 0; +} + +static int au8522_led_status(struct au8522_state *state, const u16 *snr) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + int led; + u16 strong; + + /* bail out if we can't control an LED */ + if (!led_config) + return 0; + + if (0 == (state->fe_status & FE_HAS_LOCK)) + return au8522_led_ctrl(state, 0); + else if (state->current_modulation == QAM_256) + strong = led_config->qam256_strong; + else if (state->current_modulation == QAM_64) + strong = led_config->qam64_strong; + else /* (state->current_modulation == VSB_8) */ + strong = led_config->vsb8_strong; + + if (*snr >= strong) + led = 2; + else + led = 1; + + if ((state->led_state) && + (((strong < *snr) ? (*snr - strong) : (strong - *snr)) <= 10)) + /* snr didn't change enough to bother + * changing the color of the led */ + return 0; + + return au8522_led_ctrl(state, led); +} + +static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct au8522_state *state = fe->demodulator_priv; + int ret = -EINVAL; + + dprintk("%s()\n", __func__); + + if (state->current_modulation == QAM_256) + ret = au8522_mse2snr_lookup(qam256_mse2snr_tab, + ARRAY_SIZE(qam256_mse2snr_tab), + au8522_readreg(state, 0x4522), + snr); + else if (state->current_modulation == QAM_64) + ret = au8522_mse2snr_lookup(qam64_mse2snr_tab, + ARRAY_SIZE(qam64_mse2snr_tab), + au8522_readreg(state, 0x4522), + snr); + else /* VSB_8 */ + ret = au8522_mse2snr_lookup(vsb_mse2snr_tab, + ARRAY_SIZE(vsb_mse2snr_tab), + au8522_readreg(state, 0x4311), + snr); + + if (state->config->led_cfg) + au8522_led_status(state, snr); + + return ret; +} + +static int au8522_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + /* borrowed from lgdt330x.c + * + * Calculate strength from SNR up to 35dB + * Even though the SNR can go higher than 35dB, + * there is some comfort factor in having a range of + * strong signals that can show at 100% + */ + u16 snr; + u32 tmp; + int ret = au8522_read_snr(fe, &snr); + + *signal_strength = 0; + + if (0 == ret) { + /* The following calculation method was chosen + * purely for the sake of code re-use from the + * other demod drivers that use this method */ + + /* Convert from SNR in dB * 10 to 8.24 fixed-point */ + tmp = (snr * ((1 << 24) / 10)); + + /* Convert from 8.24 fixed-point to + * scale the range 0 - 35*2^24 into 0 - 65535*/ + if (tmp >= 8960 * 0x10000) + *signal_strength = 0xffff; + else + *signal_strength = tmp / 8960; + } + + return ret; +} + +static int au8522_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct au8522_state *state = fe->demodulator_priv; + + if (state->current_modulation == VSB_8) + *ucblocks = au8522_readreg(state, 0x4087); + else + *ucblocks = au8522_readreg(state, 0x4543); + + return 0; +} + +static int au8522_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return au8522_read_ucblocks(fe, ber); +} + +static int au8522_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct au8522_state *state = fe->demodulator_priv; + + c->frequency = state->current_frequency; + c->modulation = state->current_modulation; + + return 0; +} + +static int au8522_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static struct dvb_frontend_ops au8522_ops; + + +static void au8522_release(struct dvb_frontend *fe) +{ + struct au8522_state *state = fe->demodulator_priv; + au8522_release_state(state); +} + +struct dvb_frontend *au8522_attach(const struct au8522_config *config, + struct i2c_adapter *i2c) +{ + struct au8522_state *state = NULL; + int instance; + + /* allocate memory for the internal state */ + instance = au8522_get_state(&state, i2c, config->demod_address); + switch (instance) { + case 0: + dprintk("%s state allocation failed\n", __func__); + break; + case 1: + /* new demod instance */ + dprintk("%s using new instance\n", __func__); + break; + default: + /* existing demod instance */ + dprintk("%s using existing instance\n", __func__); + break; + } + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->operational_mode = AU8522_DIGITAL_MODE; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &au8522_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + state->frontend.ops.analog_ops.i2c_gate_ctrl = au8522_analog_i2c_gate_ctrl; + + if (au8522_init(&state->frontend) != 0) { + printk(KERN_ERR "%s: Failed to initialize correctly\n", + __func__); + goto error; + } + + /* Note: Leaving the I2C gate open here. */ + au8522_i2c_gate_ctrl(&state->frontend, 1); + + return &state->frontend; + +error: + au8522_release_state(state); + return NULL; +} +EXPORT_SYMBOL(au8522_attach); + +static struct dvb_frontend_ops au8522_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "Auvitek AU8522 QAM/8VSB Frontend", + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + + .init = au8522_init, + .sleep = au8522_sleep, + .i2c_gate_ctrl = au8522_i2c_gate_ctrl, + .set_frontend = au8522_set_frontend, + .get_frontend = au8522_get_frontend, + .get_tune_settings = au8522_get_tune_settings, + .read_status = au8522_read_status, + .read_ber = au8522_read_ber, + .read_signal_strength = au8522_read_signal_strength, + .read_snr = au8522_read_snr, + .read_ucblocks = au8522_read_ucblocks, + .release = au8522_release, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/au8522_priv.h b/drivers/media/dvb-frontends/au8522_priv.h new file mode 100644 index 00000000..aa0f16d6 --- /dev/null +++ b/drivers/media/dvb-frontends/au8522_priv.h @@ -0,0 +1,444 @@ +/* + Auvitek AU8522 QAM/8VSB demodulator driver + + Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Devin Heitmueller + Copyright (C) 2005-2008 Auvitek International, Ltd. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "au8522.h" +#include "tuner-i2c.h" + +#define AU8522_ANALOG_MODE 0 +#define AU8522_DIGITAL_MODE 1 + +struct au8522_state { + struct i2c_client *c; + struct i2c_adapter *i2c; + + u8 operational_mode; + + /* Used for sharing of the state between analog and digital mode */ + struct tuner_i2c_props i2c_props; + struct list_head hybrid_tuner_instance_list; + + /* configuration settings */ + const struct au8522_config *config; + + struct dvb_frontend frontend; + + u32 current_frequency; + fe_modulation_t current_modulation; + + u32 fe_status; + unsigned int led_state; + + /* Analog settings */ + struct v4l2_subdev sd; + v4l2_std_id std; + int vid_input; + int aud_input; + u32 id; + u32 rev; + struct v4l2_ctrl_handler hdl; +}; + +/* These are routines shared by both the VSB/QAM demodulator and the analog + decoder */ +int au8522_writereg(struct au8522_state *state, u16 reg, u8 data); +u8 au8522_readreg(struct au8522_state *state, u16 reg); +int au8522_init(struct dvb_frontend *fe); +int au8522_sleep(struct dvb_frontend *fe); + +int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c, + u8 client_address); +void au8522_release_state(struct au8522_state *state); +int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable); +int au8522_analog_i2c_gate_ctrl(struct dvb_frontend *fe, int enable); +int au8522_led_ctrl(struct au8522_state *state, int led); + +/* REGISTERS */ +#define AU8522_INPUT_CONTROL_REG081H 0x081 +#define AU8522_PGA_CONTROL_REG082H 0x082 +#define AU8522_CLAMPING_CONTROL_REG083H 0x083 + +#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H 0x0A3 +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H 0x0A4 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H 0x0A5 +#define AU8522_AGC_CONTROL_RANGE_REG0A6H 0x0A6 +#define AU8522_SYSTEM_GAIN_CONTROL_REG0A7H 0x0A7 +#define AU8522_TUNER_AGC_RF_STOP_REG0A8H 0x0A8 +#define AU8522_TUNER_AGC_RF_START_REG0A9H 0x0A9 +#define AU8522_TUNER_RF_AGC_DEFAULT_REG0AAH 0x0AA +#define AU8522_TUNER_AGC_IF_STOP_REG0ABH 0x0AB +#define AU8522_TUNER_AGC_IF_START_REG0ACH 0x0AC +#define AU8522_TUNER_AGC_IF_DEFAULT_REG0ADH 0x0AD +#define AU8522_TUNER_AGC_STEP_REG0AEH 0x0AE +#define AU8522_TUNER_GAIN_STEP_REG0AFH 0x0AF + +/* Receiver registers */ +#define AU8522_FRMREGTHRD1_REG0B0H 0x0B0 +#define AU8522_FRMREGAGC1H_REG0B1H 0x0B1 +#define AU8522_FRMREGSHIFT1_REG0B2H 0x0B2 +#define AU8522_TOREGAGC1_REG0B3H 0x0B3 +#define AU8522_TOREGASHIFT1_REG0B4H 0x0B4 +#define AU8522_FRMREGBBH_REG0B5H 0x0B5 +#define AU8522_FRMREGBBM_REG0B6H 0x0B6 +#define AU8522_FRMREGBBL_REG0B7H 0x0B7 +/* 0xB8 TO 0xD7 are the filter coefficients */ +#define AU8522_FRMREGTHRD2_REG0D8H 0x0D8 +#define AU8522_FRMREGAGC2H_REG0D9H 0x0D9 +#define AU8522_TOREGAGC2_REG0DAH 0x0DA +#define AU8522_TOREGSHIFT2_REG0DBH 0x0DB +#define AU8522_FRMREGPILOTH_REG0DCH 0x0DC +#define AU8522_FRMREGPILOTM_REG0DDH 0x0DD +#define AU8522_FRMREGPILOTL_REG0DEH 0x0DE +#define AU8522_TOREGFREQ_REG0DFH 0x0DF + +#define AU8522_RX_PGA_RFOUT_REG0EBH 0x0EB +#define AU8522_RX_PGA_IFOUT_REG0ECH 0x0EC +#define AU8522_RX_PGA_PGAOUT_REG0EDH 0x0ED + +#define AU8522_CHIP_MODE_REG0FEH 0x0FE + +/* I2C bus control registers */ +#define AU8522_I2C_CONTROL_REG0_REG090H 0x090 +#define AU8522_I2C_CONTROL_REG1_REG091H 0x091 +#define AU8522_I2C_STATUS_REG092H 0x092 +#define AU8522_I2C_WR_DATA0_REG093H 0x093 +#define AU8522_I2C_WR_DATA1_REG094H 0x094 +#define AU8522_I2C_WR_DATA2_REG095H 0x095 +#define AU8522_I2C_WR_DATA3_REG096H 0x096 +#define AU8522_I2C_WR_DATA4_REG097H 0x097 +#define AU8522_I2C_WR_DATA5_REG098H 0x098 +#define AU8522_I2C_WR_DATA6_REG099H 0x099 +#define AU8522_I2C_WR_DATA7_REG09AH 0x09A +#define AU8522_I2C_RD_DATA0_REG09BH 0x09B +#define AU8522_I2C_RD_DATA1_REG09CH 0x09C +#define AU8522_I2C_RD_DATA2_REG09DH 0x09D +#define AU8522_I2C_RD_DATA3_REG09EH 0x09E +#define AU8522_I2C_RD_DATA4_REG09FH 0x09F +#define AU8522_I2C_RD_DATA5_REG0A0H 0x0A0 +#define AU8522_I2C_RD_DATA6_REG0A1H 0x0A1 +#define AU8522_I2C_RD_DATA7_REG0A2H 0x0A2 + +#define AU8522_ENA_USB_REG101H 0x101 + +#define AU8522_I2S_CTRL_0_REG110H 0x110 +#define AU8522_I2S_CTRL_1_REG111H 0x111 +#define AU8522_I2S_CTRL_2_REG112H 0x112 + +#define AU8522_FRMREGFFECONTROL_REG121H 0x121 +#define AU8522_FRMREGDFECONTROL_REG122H 0x122 + +#define AU8522_CARRFREQOFFSET0_REG201H 0x201 +#define AU8522_CARRFREQOFFSET1_REG202H 0x202 + +#define AU8522_DECIMATION_GAIN_REG21AH 0x21A +#define AU8522_FRMREGIFSLP_REG21BH 0x21B +#define AU8522_FRMREGTHRDL2_REG21CH 0x21C +#define AU8522_FRMREGSTEP3DB_REG21DH 0x21D +#define AU8522_DAGC_GAIN_ADJUSTMENT_REG21EH 0x21E +#define AU8522_FRMREGPLLMODE_REG21FH 0x21F +#define AU8522_FRMREGCSTHRD_REG220H 0x220 +#define AU8522_FRMREGCRLOCKDMAX_REG221H 0x221 +#define AU8522_FRMREGCRPERIODMASK_REG222H 0x222 +#define AU8522_FRMREGCRLOCK0THH_REG223H 0x223 +#define AU8522_FRMREGCRLOCK1THH_REG224H 0x224 +#define AU8522_FRMREGCRLOCK0THL_REG225H 0x225 +#define AU8522_FRMREGCRLOCK1THL_REG226H 0x226 +#define AU_FRMREGPLLACQPHASESCL_REG227H 0x227 +#define AU8522_FRMREGFREQFBCTRL_REG228H 0x228 + +/* Analog TV Decoder */ +#define AU8522_TVDEC_STATUS_REG000H 0x000 +#define AU8522_TVDEC_INT_STATUS_REG001H 0x001 +#define AU8522_TVDEC_MACROVISION_STATUS_REG002H 0x002 +#define AU8522_TVDEC_SHARPNESSREG009H 0x009 +#define AU8522_TVDEC_BRIGHTNESS_REG00AH 0x00A +#define AU8522_TVDEC_CONTRAST_REG00BH 0x00B +#define AU8522_TVDEC_SATURATION_CB_REG00CH 0x00C +#define AU8522_TVDEC_SATURATION_CR_REG00DH 0x00D +#define AU8522_TVDEC_HUE_H_REG00EH 0x00E +#define AU8522_TVDEC_HUE_L_REG00FH 0x00F +#define AU8522_TVDEC_INT_MASK_REG010H 0x010 +#define AU8522_VIDEO_MODE_REG011H 0x011 +#define AU8522_TVDEC_PGA_REG012H 0x012 +#define AU8522_TVDEC_COMB_MODE_REG015H 0x015 +#define AU8522_REG016H 0x016 +#define AU8522_TVDED_DBG_MODE_REG060H 0x060 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H 0x061 +#define AU8522_TVDEC_FORMAT_CTRL2_REG062H 0x062 +#define AU8522_TVDEC_VCR_DET_LLIM_REG063H 0x063 +#define AU8522_TVDEC_VCR_DET_HLIM_REG064H 0x064 +#define AU8522_TVDEC_COMB_VDIF_THR1_REG065H 0x065 +#define AU8522_TVDEC_COMB_VDIF_THR2_REG066H 0x066 +#define AU8522_TVDEC_COMB_VDIF_THR3_REG067H 0x067 +#define AU8522_TVDEC_COMB_NOTCH_THR_REG068H 0x068 +#define AU8522_TVDEC_COMB_HDIF_THR1_REG069H 0x069 +#define AU8522_TVDEC_COMB_HDIF_THR2_REG06AH 0x06A +#define AU8522_TVDEC_COMB_HDIF_THR3_REG06BH 0x06B +#define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH 0x06C +#define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH 0x06D +#define AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH 0x06E +#define AU8522_TVDEC_UV_SEP_THR_REG06FH 0x06F +#define AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H 0x070 +#define AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H 0x073 +#define AU8522_TVDEC_DCAGC_CTRL_REG077H 0x077 +#define AU8522_TVDEC_PIC_START_ADJ_REG078H 0x078 +#define AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H 0x079 +#define AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH 0x07A +#define AU8522_TVDEC_INTRP_CTRL_REG07BH 0x07B +#define AU8522_TVDEC_PLL_STATUS_REG07EH 0x07E +#define AU8522_TVDEC_FSC_FREQ_REG07FH 0x07F + +#define AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H 0x0E4 +#define AU8522_TOREGAAGC_REG0E5H 0x0E5 + +#define AU8522_TVDEC_CHROMA_AGC_REG401H 0x401 +#define AU8522_TVDEC_CHROMA_SFT_REG402H 0x402 +#define AU8522_FILTER_COEF_R410 0x410 +#define AU8522_FILTER_COEF_R411 0x411 +#define AU8522_FILTER_COEF_R412 0x412 +#define AU8522_FILTER_COEF_R413 0x413 +#define AU8522_FILTER_COEF_R414 0x414 +#define AU8522_FILTER_COEF_R415 0x415 +#define AU8522_FILTER_COEF_R416 0x416 +#define AU8522_FILTER_COEF_R417 0x417 +#define AU8522_FILTER_COEF_R418 0x418 +#define AU8522_FILTER_COEF_R419 0x419 +#define AU8522_FILTER_COEF_R41A 0x41A +#define AU8522_FILTER_COEF_R41B 0x41B +#define AU8522_FILTER_COEF_R41C 0x41C +#define AU8522_FILTER_COEF_R41D 0x41D +#define AU8522_FILTER_COEF_R41E 0x41E +#define AU8522_FILTER_COEF_R41F 0x41F +#define AU8522_FILTER_COEF_R420 0x420 +#define AU8522_FILTER_COEF_R421 0x421 +#define AU8522_FILTER_COEF_R422 0x422 +#define AU8522_FILTER_COEF_R423 0x423 +#define AU8522_FILTER_COEF_R424 0x424 +#define AU8522_FILTER_COEF_R425 0x425 +#define AU8522_FILTER_COEF_R426 0x426 +#define AU8522_FILTER_COEF_R427 0x427 +#define AU8522_FILTER_COEF_R428 0x428 +#define AU8522_FILTER_COEF_R429 0x429 +#define AU8522_FILTER_COEF_R42A 0x42A +#define AU8522_FILTER_COEF_R42B 0x42B +#define AU8522_FILTER_COEF_R42C 0x42C +#define AU8522_FILTER_COEF_R42D 0x42D + +/* VBI Control Registers */ +#define AU8522_TVDEC_VBI_RX_FIFO_CONTAIN_REG004H 0x004 +#define AU8522_TVDEC_VBI_TX_FIFO_CONTAIN_REG005H 0x005 +#define AU8522_TVDEC_VBI_RX_FIFO_READ_REG006H 0x006 +#define AU8522_TVDEC_VBI_FIFO_STATUS_REG007H 0x007 +#define AU8522_TVDEC_VBI_CTRL_H_REG017H 0x017 +#define AU8522_TVDEC_VBI_CTRL_L_REG018H 0x018 +#define AU8522_TVDEC_VBI_USER_TOTAL_BITS_REG019H 0x019 +#define AU8522_TVDEC_VBI_USER_TUNIT_H_REG01AH 0x01A +#define AU8522_TVDEC_VBI_USER_TUNIT_L_REG01BH 0x01B +#define AU8522_TVDEC_VBI_USER_THRESH1_REG01CH 0x01C +#define AU8522_TVDEC_VBI_USER_FRAME_PAT2_REG01EH 0x01E +#define AU8522_TVDEC_VBI_USER_FRAME_PAT1_REG01FH 0x01F +#define AU8522_TVDEC_VBI_USER_FRAME_PAT0_REG020H 0x020 +#define AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H 0x021 +#define AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H 0x022 +#define AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H 0x023 + +#define AU8522_REG071H 0x071 +#define AU8522_REG072H 0x072 +#define AU8522_REG074H 0x074 +#define AU8522_REG075H 0x075 + +/* Digital Demodulator Registers */ +#define AU8522_FRAME_COUNT0_REG084H 0x084 +#define AU8522_RS_STATUS_G0_REG085H 0x085 +#define AU8522_RS_STATUS_B0_REG086H 0x086 +#define AU8522_RS_STATUS_E_REG087H 0x087 +#define AU8522_DEMODULATION_STATUS_REG088H 0x088 +#define AU8522_TOREGTRESTATUS_REG0E6H 0x0E6 +#define AU8522_TSPORT_CONTROL_REG10BH 0x10B +#define AU8522_TSTHES_REG10CH 0x10C +#define AU8522_FRMREGDFEKEEP_REG301H 0x301 +#define AU8522_DFE_AVERAGE_REG302H 0x302 +#define AU8522_FRMREGEQLERRWIN_REG303H 0x303 +#define AU8522_FRMREGFFEKEEP_REG304H 0x304 +#define AU8522_FRMREGDFECONTROL1_REG305H 0x305 +#define AU8522_FRMREGEQLERRLOW_REG306H 0x306 + +#define AU8522_REG42EH 0x42E +#define AU8522_REG42FH 0x42F +#define AU8522_REG430H 0x430 +#define AU8522_REG431H 0x431 +#define AU8522_REG432H 0x432 +#define AU8522_REG433H 0x433 +#define AU8522_REG434H 0x434 +#define AU8522_REG435H 0x435 +#define AU8522_REG436H 0x436 + +/* GPIO Registers */ +#define AU8522_GPIO_CONTROL_REG0E0H 0x0E0 +#define AU8522_GPIO_STATUS_REG0E1H 0x0E1 +#define AU8522_GPIO_DATA_REG0E2H 0x0E2 + +/* Audio Control Registers */ +#define AU8522_AUDIOAGC_REG0EEH 0x0EE +#define AU8522_AUDIO_STATUS_REG0F0H 0x0F0 +#define AU8522_AUDIO_MODE_REG0F1H 0x0F1 +#define AU8522_AUDIO_VOLUME_L_REG0F2H 0x0F2 +#define AU8522_AUDIO_VOLUME_R_REG0F3H 0x0F3 +#define AU8522_AUDIO_VOLUME_REG0F4H 0x0F4 +#define AU8522_FRMREGAUPHASE_REG0F7H 0x0F7 +#define AU8522_REG0F9H 0x0F9 + +#define AU8522_AUDIOAGC2_REG605H 0x605 +#define AU8522_AUDIOFREQ_REG606H 0x606 + + +/**************************************************************/ + +/* Format control 1 */ + +/* VCR Mode 7-6 */ +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_YES 0x80 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_NO 0x40 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_AUTO 0x00 +/* Field len 5-4 */ +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_625 0x20 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 0x10 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_AUTO 0x00 +/* Line len (us) 3-2 */ +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_64_000 0x0b +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 0x08 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_556 0x04 +/* Subcarrier freq 1-0 */ +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_AUTO 0x03 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_443 0x02 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN 0x01 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_50 0x00 + +/* Format control 2 */ +#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_AUTODETECT 0x00 +#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC 0x01 + + +#define AU8522_INPUT_CONTROL_REG081H_ATSC 0xC4 +#define AU8522_INPUT_CONTROL_REG081H_ATVRF 0xC4 +#define AU8522_INPUT_CONTROL_REG081H_ATVRF13 0xC4 +#define AU8522_INPUT_CONTROL_REG081H_J83B64 0xC4 +#define AU8522_INPUT_CONTROL_REG081H_J83B256 0xC4 +#define AU8522_INPUT_CONTROL_REG081H_CVBS 0x20 +#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH1 0xA2 +#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH2 0xA0 +#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH3 0x69 +#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH4 0x68 +#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF 0x28 +/* CH1 AS Y,CH3 AS C */ +#define AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 0x23 +/* CH2 AS Y,CH4 AS C */ +#define AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24 0x20 +#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_ATSC 0x0C +#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_J83B64 0x09 +#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_J83B256 0x09 +#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS 0x12 +#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_ATVRF 0x1A +#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_ATVRF13 0x1A +#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO 0x02 + +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CLEAR 0x00 +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO 0x9C +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS 0x9D +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_ATSC 0xE8 +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_J83B256 0xCA +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_J83B64 0xCA +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_ATVRF 0xDD +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_ATVRF13 0xDD +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_PAL 0xDD +#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_FM 0xDD + +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_ATSC 0x80 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_J83B256 0x80 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_J83B64 0x80 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_DONGLE_ATSC 0x40 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_DONGLE_J83B256 0x40 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_DONGLE_J83B64 0x40 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_DONGLE_CLEAR 0x00 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_ATVRF 0x01 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_ATVRF13 0x01 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_SVIDEO 0x04 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_CVBS 0x01 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_PWM 0x03 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_IIS 0x09 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_PAL 0x01 +#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_FM 0x01 + +/* STILL NEED TO BE REFACTORED @@@@@@@@@@@@@@ */ +#define AU8522_TVDEC_CONTRAST_REG00BH_CVBS 0x79 +#define AU8522_TVDEC_SATURATION_CB_REG00CH_CVBS 0x80 +#define AU8522_TVDEC_SATURATION_CR_REG00DH_CVBS 0x80 +#define AU8522_TVDEC_HUE_H_REG00EH_CVBS 0x00 +#define AU8522_TVDEC_HUE_L_REG00FH_CVBS 0x00 +#define AU8522_TVDEC_PGA_REG012H_CVBS 0x0F +#define AU8522_TVDEC_COMB_MODE_REG015H_CVBS 0x00 +#define AU8522_REG016H_CVBS 0x00 +#define AU8522_TVDED_DBG_MODE_REG060H_CVBS 0x00 +#define AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS 0x19 +#define AU8522_REG0F9H_AUDIO 0x20 +#define AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS 0xA7 +#define AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS 0x0A +#define AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS 0x32 +#define AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS 0x19 +#define AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS 0x23 +#define AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS 0x41 +#define AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS 0x0A +#define AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS 0x32 +#define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS 0x34 +#define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO 0x2a +#define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS 0x05 +#define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO 0x15 +#define AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS 0x6E +#define AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS 0x0F +#define AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS 0x80 +#define AU8522_REG071H_CVBS 0x18 +#define AU8522_REG072H_CVBS 0x30 +#define AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS 0xF0 +#define AU8522_REG074H_CVBS 0x80 +#define AU8522_REG075H_CVBS 0xF0 +#define AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS 0xFB +#define AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS 0x04 +#define AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS 0x00 +#define AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS 0x00 +#define AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS 0xEE +#define AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS 0xFE +#define AU8522_TOREGAAGC_REG0E5H_CVBS 0x00 +#define AU8522_TVDEC_VBI6A_REG035H_CVBS 0x40 + +/* Enables Closed captioning */ +#define AU8522_TVDEC_VBI_CTRL_H_REG017H_CCON 0x21 diff --git a/drivers/media/dvb-frontends/bcm3510.c b/drivers/media/dvb-frontends/bcm3510.c new file mode 100644 index 00000000..39a29dd2 --- /dev/null +++ b/drivers/media/dvb-frontends/bcm3510.c @@ -0,0 +1,869 @@ +/* + * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC) + * + * Copyright (C) 2001-5, B2C2 inc. + * + * GPL/Linux driver written by Patrick Boettcher + * + * This driver is "hard-coded" to be used with the 1st generation of + * Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming + * (Panasonic CT10S) is located here, which is actually wrong. Unless there is + * another device with a BCM3510, this is no problem. + * + * The driver works also with QAM64 DVB-C, but had an unreasonable high + * UNC. (Tested with the Air2PC ATSC 1st generation) + * + * You'll need a firmware for this driver in order to get it running. It is + * called "dvb-fe-bcm3510-01.fw". + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 675 Mass + * Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "bcm3510.h" +#include "bcm3510_priv.h" + +/* Max transfer size done by bcm3510_do_hab_cmd() function */ +#define MAX_XFER_SIZE 128 + +struct bcm3510_state { + + struct i2c_adapter* i2c; + const struct bcm3510_config* config; + struct dvb_frontend frontend; + + /* demodulator private data */ + struct mutex hab_mutex; + u8 firmware_loaded:1; + + unsigned long next_status_check; + unsigned long status_check_interval; + struct bcm3510_hab_cmd_status1 status1; + struct bcm3510_hab_cmd_status2 status2; +}; + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able))."); + +#define dprintk(level,x...) if (level & debug) printk(x) +#define dbufout(b,l,m) {\ + int i; \ + for (i = 0; i < l; i++) \ + m("%02x ",b[i]); \ +} +#define deb_info(args...) dprintk(0x01,args) +#define deb_i2c(args...) dprintk(0x02,args) +#define deb_hab(args...) dprintk(0x04,args) + +/* transfer functions */ +static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len) +{ + u8 b[256]; + int err; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 }; + + b[0] = reg; + memcpy(&b[1],buf,len); + + deb_i2c("i2c wr %02x: ",reg); + dbufout(buf,len,deb_i2c); + deb_i2c("\n"); + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + + deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n", + __func__, state->config->demod_address, reg, err); + return -EREMOTEIO; + } + + return 0; +} + +static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len) +{ + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } + }; + int err; + + memset(buf,0,len); + + if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { + deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n", + __func__, state->config->demod_address, reg, err); + return -EREMOTEIO; + } + deb_i2c("i2c rd %02x: ",reg); + dbufout(buf,len,deb_i2c); + deb_i2c("\n"); + + return 0; +} + +static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v) +{ + return bcm3510_writebytes(state,reg,&v.raw,1); +} + +static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v) +{ + return bcm3510_readbytes(state,reg,&v->raw,1); +} + +/* Host Access Buffer transfers */ +static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len) +{ + bcm3510_register_value v; + int ret,i; + + v.HABADR_a6.HABADR = 0; + if ((ret = bcm3510_writeB(st,0xa6,v)) < 0) + return ret; + + for (i = 0; i < len; i++) { + if ((ret = bcm3510_readB(st,0xa7,&v)) < 0) + return ret; + buf[i] = v.HABDATA_a7; + } + return 0; +} + +static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len) +{ + bcm3510_register_value v,hab; + int ret,i; + unsigned long t; + +/* Check if any previous HAB request still needs to be serviced by the + * Acquisition Processor before sending new request */ + if ((ret = bcm3510_readB(st,0xa8,&v)) < 0) + return ret; + if (v.HABSTAT_a8.HABR) { + deb_info("HAB is running already - clearing it.\n"); + v.HABSTAT_a8.HABR = 0; + bcm3510_writeB(st,0xa8,v); +// return -EBUSY; + } + +/* Send the start HAB Address (automatically incremented after write of + * HABDATA) and write the HAB Data */ + hab.HABADR_a6.HABADR = 0; + if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0) + return ret; + + for (i = 0; i < len; i++) { + hab.HABDATA_a7 = buf[i]; + if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0) + return ret; + } + +/* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to + * be written) */ + v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1; + if ((ret = bcm3510_writeB(st,0xa8,v)) < 0) + return ret; + +/* Polling method: Wait until the AP finishes processing the HAB request */ + t = jiffies + 1*HZ; + while (time_before(jiffies, t)) { + deb_info("waiting for HAB to complete\n"); + msleep(10); + if ((ret = bcm3510_readB(st,0xa8,&v)) < 0) + return ret; + + if (!v.HABSTAT_a8.HABR) + return 0; + } + + deb_info("send_request execution timed out.\n"); + return -ETIMEDOUT; +} + +static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen) +{ + u8 ob[MAX_XFER_SIZE], ib[MAX_XFER_SIZE]; + int ret = 0; + + if (ilen + 2 > sizeof(ib)) { + deb_hab("do_hab_cmd: ilen=%d is too big!\n", ilen); + return -EINVAL; + } + + if (olen + 2 > sizeof(ob)) { + deb_hab("do_hab_cmd: olen=%d is too big!\n", olen); + return -EINVAL; + } + + ob[0] = cmd; + ob[1] = msgid; + memcpy(&ob[2],obuf,olen); + + deb_hab("hab snd: "); + dbufout(ob,olen+2,deb_hab); + deb_hab("\n"); + + if (mutex_lock_interruptible(&st->hab_mutex) < 0) + return -EAGAIN; + + if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 || + (ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0) + goto error; + + deb_hab("hab get: "); + dbufout(ib,ilen+2,deb_hab); + deb_hab("\n"); + + memcpy(ibuf,&ib[2],ilen); +error: + mutex_unlock(&st->hab_mutex); + return ret; +} + +#if 0 +/* not needed, we use a semaphore to prevent HAB races */ +static int bcm3510_is_ap_ready(struct bcm3510_state *st) +{ + bcm3510_register_value ap,hab; + int ret; + + if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 || + (ret = bcm3510_readB(st,0xa2,&ap) < 0)) + return ret; + + if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) { + deb_info("AP is busy\n"); + return -EBUSY; + } + + return 0; +} +#endif + +static int bcm3510_bert_reset(struct bcm3510_state *st) +{ + bcm3510_register_value b; + int ret; + + if ((ret = bcm3510_readB(st,0xfa,&b)) < 0) + return ret; + + b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b); + + /* clear residual bit counter TODO */ + return 0; +} + +static int bcm3510_refresh_state(struct bcm3510_state *st) +{ + if (time_after(jiffies,st->next_status_check)) { + bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1)); + bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2)); + st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; + } + return 0; +} + +static int bcm3510_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *status = 0; + if (st->status1.STATUS1.RECEIVER_LOCK) + *status |= FE_HAS_LOCK | FE_HAS_SYNC; + + if (st->status1.STATUS1.FEC_LOCK) + *status |= FE_HAS_VITERBI; + + if (st->status1.STATUS1.OUT_PLL_LOCK) + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; + + if (*status & FE_HAS_LOCK) + st->status_check_interval = 1500; + else /* more frequently checks if no lock has been achieved yet */ + st->status_check_interval = 500; + + deb_info("real_status: %02x\n",*status); + return 0; +} + +static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2; + return 0; +} + +static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + *unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1; + return 0; +} + +static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct bcm3510_state* st = fe->demodulator_priv; + s32 t; + + bcm3510_refresh_state(st); + t = st->status2.SIGNAL; + + if (t > 190) + t = 190; + if (t < 90) + t = 90; + + t -= 90; + t = t * 0xff / 100; + /* normalize if necessary */ + *strength = (t << 8) | t; + return 0; +} + +static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8); + return 0; +} + +/* tuner frontend programming */ +static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a) +{ + struct bcm3510_hab_cmd_tune c; + memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune)); + +/* I2C Mode disabled, set 16 control / Data pairs */ + c.length = 0x10; + c.clock_width = 0; +/* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to + * logic high (as Configuration) */ + c.misc = 0x10; +/* Set duration of the initial state of TUNCTL = 3.34 micro Sec */ + c.TUNCTL_state = 0x40; + +/* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */ + c.ctl_dat[0].ctrl.size = BITS_8; + c.ctl_dat[0].data = 0x80 | bc; + +/* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */ + c.ctl_dat[1].ctrl.size = BITS_8; + c.ctl_dat[1].data = 4; + +/* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */ + c.ctl_dat[2].ctrl.size = BITS_3; + c.ctl_dat[2].data = 0x20; + +/* control CS0 pin, pulse byte ? */ + c.ctl_dat[3].ctrl.size = BITS_3; + c.ctl_dat[3].ctrl.clk_off = 1; + c.ctl_dat[3].ctrl.cs0 = 1; + c.ctl_dat[3].data = 0x40; + +/* PGM_S18 to PGM_S11 */ + c.ctl_dat[4].ctrl.size = BITS_8; + c.ctl_dat[4].data = n >> 3; + +/* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */ + c.ctl_dat[5].ctrl.size = BITS_8; + c.ctl_dat[5].data = ((n & 0x7) << 5) | (a >> 2); + +/* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */ + c.ctl_dat[6].ctrl.size = BITS_3; + c.ctl_dat[6].data = (a << 6) & 0xdf; + +/* control CS0 pin, pulse byte ? */ + c.ctl_dat[7].ctrl.size = BITS_3; + c.ctl_dat[7].ctrl.clk_off = 1; + c.ctl_dat[7].ctrl.cs0 = 1; + c.ctl_dat[7].data = 0x40; + +/* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */ + c.ctl_dat[8].ctrl.size = BITS_8; + c.ctl_dat[8].data = 0x80; + +/* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */ + c.ctl_dat[9].ctrl.size = BITS_8; + c.ctl_dat[9].data = 0x10; + +/* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */ + c.ctl_dat[10].ctrl.size = BITS_3; + c.ctl_dat[10].data = 0x20; + +/* pulse byte */ + c.ctl_dat[11].ctrl.size = BITS_3; + c.ctl_dat[11].ctrl.clk_off = 1; + c.ctl_dat[11].ctrl.cs1 = 1; + c.ctl_dat[11].data = 0x40; + +/* PGM_S18 to PGM_S11 */ + c.ctl_dat[12].ctrl.size = BITS_8; + c.ctl_dat[12].data = 0x2a; + +/* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */ + c.ctl_dat[13].ctrl.size = BITS_8; + c.ctl_dat[13].data = 0x8e; + +/* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */ + c.ctl_dat[14].ctrl.size = BITS_3; + c.ctl_dat[14].data = 0; + +/* Pulse Byte */ + c.ctl_dat[15].ctrl.size = BITS_3; + c.ctl_dat[15].ctrl.clk_off = 1; + c.ctl_dat[15].ctrl.cs1 = 1; + c.ctl_dat[15].data = 0x40; + + return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0); +} + +static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq) +{ + u8 bc,a; + u16 n; + s32 YIntercept,Tfvco1; + + freq /= 1000; + + deb_info("%dkHz:",freq); + /* set Band Switch */ + if (freq <= 168000) + bc = 0x1c; + else if (freq <= 378000) + bc = 0x2c; + else + bc = 0x30; + + if (freq >= 470000) { + freq -= 470001; + YIntercept = 18805; + } else if (freq >= 90000) { + freq -= 90001; + YIntercept = 15005; + } else if (freq >= 76000){ + freq -= 76001; + YIntercept = 14865; + } else { + freq -= 54001; + YIntercept = 14645; + } + + Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10; + + n = Tfvco1 >> 6; + a = Tfvco1 & 0x3f; + + deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a); + if (n >= 16 && n <= 2047) + return bcm3510_tuner_cmd(st,bc,n,a); + + return -EINVAL; +} + +static int bcm3510_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct bcm3510_state* st = fe->demodulator_priv; + struct bcm3510_hab_cmd_ext_acquire cmd; + struct bcm3510_hab_cmd_bert_control bert; + int ret; + + memset(&cmd,0,sizeof(cmd)); + switch (c->modulation) { + case QAM_256: + cmd.ACQUIRE0.MODE = 0x1; + cmd.ACQUIRE1.SYM_RATE = 0x1; + cmd.ACQUIRE1.IF_FREQ = 0x1; + break; + case QAM_64: + cmd.ACQUIRE0.MODE = 0x2; + cmd.ACQUIRE1.SYM_RATE = 0x2; + cmd.ACQUIRE1.IF_FREQ = 0x1; + break; +#if 0 + case QAM_256: + cmd.ACQUIRE0.MODE = 0x3; + break; + case QAM_128: + cmd.ACQUIRE0.MODE = 0x4; + break; + case QAM_64: + cmd.ACQUIRE0.MODE = 0x5; + break; + case QAM_32: + cmd.ACQUIRE0.MODE = 0x6; + break; + case QAM_16: + cmd.ACQUIRE0.MODE = 0x7; + break; +#endif + case VSB_8: + cmd.ACQUIRE0.MODE = 0x8; + cmd.ACQUIRE1.SYM_RATE = 0x0; + cmd.ACQUIRE1.IF_FREQ = 0x0; + break; + case VSB_16: + cmd.ACQUIRE0.MODE = 0x9; + cmd.ACQUIRE1.SYM_RATE = 0x0; + cmd.ACQUIRE1.IF_FREQ = 0x0; + default: + return -EINVAL; + } + cmd.ACQUIRE0.OFFSET = 0; + cmd.ACQUIRE0.NTSCSWEEP = 1; + cmd.ACQUIRE0.FA = 1; + cmd.ACQUIRE0.BW = 0; + +/* if (enableOffset) { + cmd.IF_OFFSET0 = xx; + cmd.IF_OFFSET1 = xx; + + cmd.SYM_OFFSET0 = xx; + cmd.SYM_OFFSET1 = xx; + if (enableNtscSweep) { + cmd.NTSC_OFFSET0; + cmd.NTSC_OFFSET1; + } + } */ + bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0); + +/* doing it with different MSGIDs, data book and source differs */ + bert.BE = 0; + bert.unused = 0; + bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0); + bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0); + + bcm3510_bert_reset(st); + + ret = bcm3510_set_freq(st, c->frequency); + if (ret < 0) + return ret; + + memset(&st->status1,0,sizeof(st->status1)); + memset(&st->status2,0,sizeof(st->status2)); + st->status_check_interval = 500; + +/* Give the AP some time */ + msleep(200); + + return 0; +} + +static int bcm3510_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 1000; + s->step_size = 0; + s->max_drift = 0; + return 0; +} + +static void bcm3510_release(struct dvb_frontend* fe) +{ + struct bcm3510_state* state = fe->demodulator_priv; + kfree(state); +} + +/* firmware download: + * firmware file is build up like this: + * 16bit addr, 16bit length, 8byte of length + */ +#define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw" + +static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, const u8 *b, + u16 len) +{ + int ret = 0,i; + bcm3510_register_value vH, vL,vD; + + vH.MADRH_a9 = addr >> 8; + vL.MADRL_aa = addr; + if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret; + if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret; + + for (i = 0; i < len; i++) { + vD.MDATA_ab = b[i]; + if ((ret = bcm3510_writeB(st,0xab,vD)) < 0) + return ret; + } + + return 0; +} + +static int bcm3510_download_firmware(struct dvb_frontend* fe) +{ + struct bcm3510_state* st = fe->demodulator_priv; + const struct firmware *fw; + u16 addr,len; + const u8 *b; + int ret,i; + + deb_info("requesting firmware\n"); + if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) { + err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret); + return ret; + } + deb_info("got firmware: %zd\n",fw->size); + + b = fw->data; + for (i = 0; i < fw->size;) { + addr = le16_to_cpu( *( (u16 *)&b[i] ) ); + len = le16_to_cpu( *( (u16 *)&b[i+2] ) ); + deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04zx\n",addr,len,fw->size); + if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) { + err("firmware download failed: %d\n",ret); + return ret; + } + i += 4 + len; + } + release_firmware(fw); + deb_info("firmware download successfully completed\n"); + return 0; +} + +static int bcm3510_check_firmware_version(struct bcm3510_state *st) +{ + struct bcm3510_hab_cmd_get_version_info ver; + bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver)); + + deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n", + ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version); + + if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION && + ver.config_version == BCM3510_DEF_CONFIG_VERSION && + ver.demod_version == BCM3510_DEF_DEMOD_VERSION) + return 0; + + deb_info("version check failed\n"); + return -ENODEV; +} + +/* (un)resetting the AP */ +static int bcm3510_reset(struct bcm3510_state *st) +{ + int ret; + unsigned long t; + bcm3510_register_value v; + + bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1; + if ((ret = bcm3510_writeB(st,0xa0,v)) < 0) + return ret; + + t = jiffies + 3*HZ; + while (time_before(jiffies, t)) { + msleep(10); + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + + if (v.APSTAT1_a2.RESET) + return 0; + } + deb_info("reset timed out\n"); + return -ETIMEDOUT; +} + +static int bcm3510_clear_reset(struct bcm3510_state *st) +{ + bcm3510_register_value v; + int ret; + unsigned long t; + + v.raw = 0; + if ((ret = bcm3510_writeB(st,0xa0,v)) < 0) + return ret; + + t = jiffies + 3*HZ; + while (time_before(jiffies, t)) { + msleep(10); + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + + /* verify that reset is cleared */ + if (!v.APSTAT1_a2.RESET) + return 0; + } + deb_info("reset clear timed out\n"); + return -ETIMEDOUT; +} + +static int bcm3510_init_cold(struct bcm3510_state *st) +{ + int ret; + bcm3510_register_value v; + + /* read Acquisation Processor status register and check it is not in RUN mode */ + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + if (v.APSTAT1_a2.RUN) { + deb_info("AP is already running - firmware already loaded.\n"); + return 0; + } + + deb_info("reset?\n"); + if ((ret = bcm3510_reset(st)) < 0) + return ret; + + deb_info("tristate?\n"); + /* tri-state */ + v.TSTCTL_2e.CTL = 0; + if ((ret = bcm3510_writeB(st,0x2e,v)) < 0) + return ret; + + deb_info("firmware?\n"); + if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 || + (ret = bcm3510_clear_reset(st)) < 0) + return ret; + + /* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */ + + return 0; +} + +static int bcm3510_init(struct dvb_frontend* fe) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_register_value j; + struct bcm3510_hab_cmd_set_agc c; + int ret; + + if ((ret = bcm3510_readB(st,0xca,&j)) < 0) + return ret; + + deb_info("JDEC: %02x\n",j.raw); + + switch (j.JDEC_ca.JDEC) { + case JDEC_WAIT_AT_RAM: + deb_info("attempting to download firmware\n"); + if ((ret = bcm3510_init_cold(st)) < 0) + return ret; + case JDEC_EEPROM_LOAD_WAIT: /* fall-through is wanted */ + deb_info("firmware is loaded\n"); + bcm3510_check_firmware_version(st); + break; + default: + return -ENODEV; + } + + memset(&c,0,1); + c.SEL = 1; + bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0); + + return 0; +} + + +static struct dvb_frontend_ops bcm3510_ops; + +struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config, + struct i2c_adapter *i2c) +{ + struct bcm3510_state* state = NULL; + int ret; + bcm3510_register_value v; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct bcm3510_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + + state->config = config; + state->i2c = i2c; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + mutex_init(&state->hab_mutex); + + if ((ret = bcm3510_readB(state,0xe0,&v)) < 0) + goto error; + + deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER); + + if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */ + (v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0)) /* warm */ + goto error; + + info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER); + + bcm3510_reset(state); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(bcm3510_attach); + +static struct dvb_frontend_ops bcm3510_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "Broadcom BCM3510 VSB/QAM frontend", + .frequency_min = 54000000, + .frequency_max = 803000000, + /* stepsize is just a guess */ + .frequency_stepsize = 0, + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_8VSB | FE_CAN_16VSB | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256 + }, + + .release = bcm3510_release, + + .init = bcm3510_init, + .sleep = bcm3510_sleep, + + .set_frontend = bcm3510_set_frontend, + .get_tune_settings = bcm3510_get_tune_settings, + + .read_status = bcm3510_read_status, + .read_ber = bcm3510_read_ber, + .read_signal_strength = bcm3510_read_signal_strength, + .read_snr = bcm3510_read_snr, + .read_ucblocks = bcm3510_read_unc, +}; + +MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver"); +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/bcm3510.h b/drivers/media/dvb-frontends/bcm3510.h new file mode 100644 index 00000000..5bd56b16 --- /dev/null +++ b/drivers/media/dvb-frontends/bcm3510.h @@ -0,0 +1,49 @@ +/* + * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC) + * + * Copyright (C) 2001-5, B2C2 inc. + * + * GPL/Linux driver written by Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef BCM3510_H +#define BCM3510_H + +#include +#include + +struct bcm3510_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* request firmware for device */ + int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); +}; + +#if IS_ENABLED(CONFIG_DVB_BCM3510) +extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_BCM3510 + +#endif diff --git a/drivers/media/dvb-frontends/bcm3510_priv.h b/drivers/media/dvb-frontends/bcm3510_priv.h new file mode 100644 index 00000000..3bb1bc2a --- /dev/null +++ b/drivers/media/dvb-frontends/bcm3510_priv.h @@ -0,0 +1,460 @@ +/* + * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC) + * + * Copyright (C) 2001-5, B2C2 inc. + * + * GPL/Linux driver written by Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __BCM3510_PRIV_H__ +#define __BCM3510_PRIV_H__ + +#define PACKED __attribute__((packed)) + +#undef err +#define err(format, arg...) printk(KERN_ERR "bcm3510: " format "\n" , ## arg) +#undef info +#define info(format, arg...) printk(KERN_INFO "bcm3510: " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) printk(KERN_WARNING "bcm3510: " format "\n" , ## arg) + + +#define PANASONIC_FIRST_IF_BASE_IN_KHz 1407500 +#define BCM3510_SYMBOL_RATE 5381000 + +typedef union { + u8 raw; + + struct { + u8 CTL :8; + } TSTCTL_2e; + + u8 LDCERC_4e; + u8 LDUERC_4f; + u8 LD_BER0_65; + u8 LD_BER1_66; + u8 LD_BER2_67; + u8 LD_BER3_68; + + struct { + u8 RESET :1; + u8 IDLE :1; + u8 STOP :1; + u8 HIRQ0 :1; + u8 HIRQ1 :1; + u8 na0 :1; + u8 HABAV :1; + u8 na1 :1; + } HCTL1_a0; + + struct { + u8 na0 :1; + u8 IDLMSK :1; + u8 STMSK :1; + u8 I0MSK :1; + u8 I1MSK :1; + u8 na1 :1; + u8 HABMSK :1; + u8 na2 :1; + } HCTLMSK_a1; + + struct { + u8 RESET :1; + u8 IDLE :1; + u8 STOP :1; + u8 RUN :1; + u8 HABAV :1; + u8 MEMAV :1; + u8 ALDONE :1; + u8 REIRQ :1; + } APSTAT1_a2; + + struct { + u8 RSTMSK :1; + u8 IMSK :1; + u8 SMSK :1; + u8 RMSK :1; + u8 HABMSK :1; + u8 MAVMSK :1; + u8 ALDMSK :1; + u8 REMSK :1; + } APMSK1_a3; + + u8 APSTAT2_a4; + u8 APMSK2_a5; + + struct { + u8 HABADR :7; + u8 na :1; + } HABADR_a6; + + u8 HABDATA_a7; + + struct { + u8 HABR :1; + u8 LDHABR :1; + u8 APMSK :1; + u8 HMSK :1; + u8 LDMSK :1; + u8 na :3; + } HABSTAT_a8; + + u8 MADRH_a9; + u8 MADRL_aa; + u8 MDATA_ab; + + struct { +#define JDEC_WAIT_AT_RAM 0x7 +#define JDEC_EEPROM_LOAD_WAIT 0x4 + u8 JDEC :3; + u8 na :5; + } JDEC_ca; + + struct { + u8 REV :4; + u8 LAYER :4; + } REVID_e0; + + struct { + u8 unk0 :1; + u8 CNTCTL :1; + u8 BITCNT :1; + u8 unk1 :1; + u8 RESYNC :1; + u8 unk2 :3; + } BERCTL_fa; + + struct { + u8 CSEL0 :1; + u8 CLKED0 :1; + u8 CSEL1 :1; + u8 CLKED1 :1; + u8 CLKLEV :1; + u8 SPIVAR :1; + u8 na :2; + } TUNSET_fc; + + struct { + u8 CLK :1; + u8 DATA :1; + u8 CS0 :1; + u8 CS1 :1; + u8 AGCSEL :1; + u8 na0 :1; + u8 TUNSEL :1; + u8 na1 :1; + } TUNCTL_fd; + + u8 TUNSEL0_fe; + u8 TUNSEL1_ff; + +} bcm3510_register_value; + +/* HAB commands */ + +/* version */ +#define CMD_GET_VERSION_INFO 0x3D +#define MSGID_GET_VERSION_INFO 0x15 +struct bcm3510_hab_cmd_get_version_info { + u8 microcode_version; + u8 script_version; + u8 config_version; + u8 demod_version; +} PACKED; + +#define BCM3510_DEF_MICROCODE_VERSION 0x0E +#define BCM3510_DEF_SCRIPT_VERSION 0x06 +#define BCM3510_DEF_CONFIG_VERSION 0x01 +#define BCM3510_DEF_DEMOD_VERSION 0xB1 + +/* acquire */ +#define CMD_ACQUIRE 0x38 + +#define MSGID_EXT_TUNER_ACQUIRE 0x0A +struct bcm3510_hab_cmd_ext_acquire { + struct { + u8 MODE :4; + u8 BW :1; + u8 FA :1; + u8 NTSCSWEEP :1; + u8 OFFSET :1; + } PACKED ACQUIRE0; /* control_byte */ + + struct { + u8 IF_FREQ :3; + u8 zero0 :1; + u8 SYM_RATE :3; + u8 zero1 :1; + } PACKED ACQUIRE1; /* sym_if */ + + u8 IF_OFFSET0; /* IF_Offset_10hz */ + u8 IF_OFFSET1; + u8 SYM_OFFSET0; /* SymbolRateOffset */ + u8 SYM_OFFSET1; + u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */ + u8 NTSC_OFFSET1; +} PACKED; + +#define MSGID_INT_TUNER_ACQUIRE 0x0B +struct bcm3510_hab_cmd_int_acquire { + struct { + u8 MODE :4; + u8 BW :1; + u8 FA :1; + u8 NTSCSWEEP :1; + u8 OFFSET :1; + } PACKED ACQUIRE0; /* control_byte */ + + struct { + u8 IF_FREQ :3; + u8 zero0 :1; + u8 SYM_RATE :3; + u8 zero1 :1; + } PACKED ACQUIRE1; /* sym_if */ + + u8 TUNER_FREQ0; + u8 TUNER_FREQ1; + u8 TUNER_FREQ2; + u8 TUNER_FREQ3; + u8 IF_OFFSET0; /* IF_Offset_10hz */ + u8 IF_OFFSET1; + u8 SYM_OFFSET0; /* SymbolRateOffset */ + u8 SYM_OFFSET1; + u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */ + u8 NTSC_OFFSET1; +} PACKED; + +/* modes */ +#define BCM3510_QAM16 = 0x01 +#define BCM3510_QAM32 = 0x02 +#define BCM3510_QAM64 = 0x03 +#define BCM3510_QAM128 = 0x04 +#define BCM3510_QAM256 = 0x05 +#define BCM3510_8VSB = 0x0B +#define BCM3510_16VSB = 0x0D + +/* IF_FREQS */ +#define BCM3510_IF_TERRESTRIAL 0x0 +#define BCM3510_IF_CABLE 0x1 +#define BCM3510_IF_USE_CMD 0x7 + +/* SYM_RATE */ +#define BCM3510_SR_8VSB 0x0 /* 5381119 s/sec */ +#define BCM3510_SR_256QAM 0x1 /* 5360537 s/sec */ +#define BCM3510_SR_16QAM 0x2 /* 5056971 s/sec */ +#define BCM3510_SR_MISC 0x3 /* 5000000 s/sec */ +#define BCM3510_SR_USE_CMD 0x7 + +/* special symbol rate */ +#define CMD_SET_VALUE_NOT_LISTED 0x2d +#define MSGID_SET_SYMBOL_RATE_NOT_LISTED 0x0c +struct bcm3510_hab_cmd_set_sr_not_listed { + u8 HOST_SYM_RATE0; + u8 HOST_SYM_RATE1; + u8 HOST_SYM_RATE2; + u8 HOST_SYM_RATE3; +} PACKED; + +/* special IF */ +#define MSGID_SET_IF_FREQ_NOT_LISTED 0x0d +struct bcm3510_hab_cmd_set_if_freq_not_listed { + u8 HOST_IF_FREQ0; + u8 HOST_IF_FREQ1; + u8 HOST_IF_FREQ2; + u8 HOST_IF_FREQ3; +} PACKED; + +/* auto reacquire */ +#define CMD_AUTO_PARAM 0x2a +#define MSGID_AUTO_REACQUIRE 0x0e +struct bcm3510_hab_cmd_auto_reacquire { + u8 ACQ :1; /* on/off*/ + u8 unused :7; +} PACKED; + +#define MSGID_SET_RF_AGC_SEL 0x12 +struct bcm3510_hab_cmd_set_agc { + u8 LVL :1; + u8 unused :6; + u8 SEL :1; +} PACKED; + +#define MSGID_SET_AUTO_INVERSION 0x14 +struct bcm3510_hab_cmd_auto_inversion { + u8 AI :1; + u8 unused :7; +} PACKED; + + +/* bert control */ +#define CMD_STATE_CONTROL 0x12 +#define MSGID_BERT_CONTROL 0x0e +#define MSGID_BERT_SET 0xfa +struct bcm3510_hab_cmd_bert_control { + u8 BE :1; + u8 unused :7; +} PACKED; + +#define MSGID_TRI_STATE 0x2e +struct bcm3510_hab_cmd_tri_state { + u8 RE :1; /* a/d ram port pins */ + u8 PE :1; /* baud clock pin */ + u8 AC :1; /* a/d clock pin */ + u8 BE :1; /* baud clock pin */ + u8 unused :4; +} PACKED; + + +/* tune */ +#define CMD_TUNE 0x38 +#define MSGID_TUNE 0x16 +struct bcm3510_hab_cmd_tune_ctrl_data_pair { + struct { +#define BITS_8 0x07 +#define BITS_7 0x06 +#define BITS_6 0x05 +#define BITS_5 0x04 +#define BITS_4 0x03 +#define BITS_3 0x02 +#define BITS_2 0x01 +#define BITS_1 0x00 + u8 size :3; + u8 unk :2; + u8 clk_off :1; + u8 cs0 :1; + u8 cs1 :1; + + } PACKED ctrl; + + u8 data; +} PACKED; + +struct bcm3510_hab_cmd_tune { + u8 length; + u8 clock_width; + u8 misc; + u8 TUNCTL_state; + + struct bcm3510_hab_cmd_tune_ctrl_data_pair ctl_dat[16]; +} PACKED; + +#define CMD_STATUS 0x38 +#define MSGID_STATUS1 0x08 +struct bcm3510_hab_cmd_status1 { + struct { + u8 EQ_MODE :4; + u8 reserved :2; + u8 QRE :1; /* if QSE and the spectrum is inversed */ + u8 QSE :1; /* automatic spectral inversion */ + } PACKED STATUS0; + + struct { + u8 RECEIVER_LOCK :1; + u8 FEC_LOCK :1; + u8 OUT_PLL_LOCK :1; + u8 reserved :5; + } PACKED STATUS1; + + struct { + u8 reserved :2; + u8 BW :1; + u8 NTE :1; /* NTSC filter sweep enabled */ + u8 AQI :1; /* currently acquiring */ + u8 FA :1; /* fast acquisition */ + u8 ARI :1; /* auto reacquire */ + u8 TI :1; /* programming the tuner */ + } PACKED STATUS2; + u8 STATUS3; + u8 SNR_EST0; + u8 SNR_EST1; + u8 TUNER_FREQ0; + u8 TUNER_FREQ1; + u8 TUNER_FREQ2; + u8 TUNER_FREQ3; + u8 SYM_RATE0; + u8 SYM_RATE1; + u8 SYM_RATE2; + u8 SYM_RATE3; + u8 SYM_OFFSET0; + u8 SYM_OFFSET1; + u8 SYM_ERROR0; + u8 SYM_ERROR1; + u8 IF_FREQ0; + u8 IF_FREQ1; + u8 IF_FREQ2; + u8 IF_FREQ3; + u8 IF_OFFSET0; + u8 IF_OFFSET1; + u8 IF_ERROR0; + u8 IF_ERROR1; + u8 NTSC_FILTER0; + u8 NTSC_FILTER1; + u8 NTSC_FILTER2; + u8 NTSC_FILTER3; + u8 NTSC_OFFSET0; + u8 NTSC_OFFSET1; + u8 NTSC_ERROR0; + u8 NTSC_ERROR1; + u8 INT_AGC_LEVEL0; + u8 INT_AGC_LEVEL1; + u8 EXT_AGC_LEVEL0; + u8 EXT_AGC_LEVEL1; +} PACKED; + +#define MSGID_STATUS2 0x14 +struct bcm3510_hab_cmd_status2 { + struct { + u8 EQ_MODE :4; + u8 reserved :2; + u8 QRE :1; + u8 QSR :1; + } PACKED STATUS0; + struct { + u8 RL :1; + u8 FL :1; + u8 OL :1; + u8 reserved :5; + } PACKED STATUS1; + u8 SYMBOL_RATE0; + u8 SYMBOL_RATE1; + u8 SYMBOL_RATE2; + u8 SYMBOL_RATE3; + u8 LDCERC0; + u8 LDCERC1; + u8 LDCERC2; + u8 LDCERC3; + u8 LDUERC0; + u8 LDUERC1; + u8 LDUERC2; + u8 LDUERC3; + u8 LDBER0; + u8 LDBER1; + u8 LDBER2; + u8 LDBER3; + struct { + u8 MODE_TYPE :4; /* acquire mode 0 */ + u8 reservd :4; + } MODE_TYPE; + u8 SNR_EST0; + u8 SNR_EST1; + u8 SIGNAL; +} PACKED; + +#define CMD_SET_RF_BW_NOT_LISTED 0x3f +#define MSGID_SET_RF_BW_NOT_LISTED 0x11 +/* TODO */ + +#endif diff --git a/drivers/media/dvb-frontends/bsbe1-d01a.h b/drivers/media/dvb-frontends/bsbe1-d01a.h new file mode 100644 index 00000000..7ed3c424 --- /dev/null +++ b/drivers/media/dvb-frontends/bsbe1-d01a.h @@ -0,0 +1,146 @@ +/* + * bsbe1-d01a.h - ALPS BSBE1-D01A tuner support + * + * Copyright (C) 2011 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef BSBE1_D01A_H +#define BSBE1_D01A_H + +#include "stb6000.h" +#include "stv0288.h" + +static u8 stv0288_bsbe1_d01a_inittab[] = { + 0x01, 0x15, + 0x02, 0x20, + 0x09, 0x0, + 0x0a, 0x4, + 0x0b, 0x0, + 0x0c, 0x0, + 0x0d, 0x0, + 0x0e, 0xd4, + 0x0f, 0x30, + 0x11, 0x80, + 0x12, 0x03, + 0x13, 0x48, + 0x14, 0x84, + 0x15, 0x45, + 0x16, 0xb7, + 0x17, 0x9c, + 0x18, 0x0, + 0x19, 0xa6, + 0x1a, 0x88, + 0x1b, 0x8f, + 0x1c, 0xf0, + 0x20, 0x0b, + 0x21, 0x54, + 0x22, 0x0, + 0x23, 0x0, + 0x2b, 0xff, + 0x2c, 0xf7, + 0x30, 0x0, + 0x31, 0x1e, + 0x32, 0x14, + 0x33, 0x0f, + 0x34, 0x09, + 0x35, 0x0c, + 0x36, 0x05, + 0x37, 0x2f, + 0x38, 0x16, + 0x39, 0xbd, + 0x3a, 0x03, + 0x3b, 0x13, + 0x3c, 0x11, + 0x3d, 0x30, + 0x40, 0x63, + 0x41, 0x04, + 0x42, 0x60, + 0x43, 0x00, + 0x44, 0x00, + 0x45, 0x00, + 0x46, 0x00, + 0x47, 0x00, + 0x4a, 0x00, + 0x50, 0x10, + 0x51, 0x36, + 0x52, 0x09, + 0x53, 0x94, + 0x54, 0x62, + 0x55, 0x29, + 0x56, 0x64, + 0x57, 0x2b, + 0x58, 0x54, + 0x59, 0x86, + 0x5a, 0x0, + 0x5b, 0x9b, + 0x5c, 0x08, + 0x5d, 0x7f, + 0x5e, 0x0, + 0x5f, 0xff, + 0x70, 0x0, + 0x71, 0x0, + 0x72, 0x0, + 0x74, 0x0, + 0x75, 0x0, + 0x76, 0x0, + 0x81, 0x0, + 0x82, 0x3f, + 0x83, 0x3f, + 0x84, 0x0, + 0x85, 0x0, + 0x88, 0x0, + 0x89, 0x0, + 0x8a, 0x0, + 0x8b, 0x0, + 0x8c, 0x0, + 0x90, 0x0, + 0x91, 0x0, + 0x92, 0x0, + 0x93, 0x0, + 0x94, 0x1c, + 0x97, 0x0, + 0xa0, 0x48, + 0xa1, 0x0, + 0xb0, 0xb8, + 0xb1, 0x3a, + 0xb2, 0x10, + 0xb3, 0x82, + 0xb4, 0x80, + 0xb5, 0x82, + 0xb6, 0x82, + 0xb7, 0x82, + 0xb8, 0x20, + 0xb9, 0x0, + 0xf0, 0x0, + 0xf1, 0x0, + 0xf2, 0xc0, + 0xff, 0xff, +}; + +static struct stv0288_config stv0288_bsbe1_d01a_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + .inittab = stv0288_bsbe1_d01a_inittab, +}; + +#endif diff --git a/drivers/media/dvb-frontends/bsbe1.h b/drivers/media/dvb-frontends/bsbe1.h new file mode 100644 index 00000000..53e4d0db --- /dev/null +++ b/drivers/media/dvb-frontends/bsbe1.h @@ -0,0 +1,106 @@ +/* + * bsbe1.h - ALPS BSBE1 tuner support + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef BSBE1_H +#define BSBE1_H + +static u8 alps_bsbe1_inittab[] = { + 0x01, 0x15, /* XTAL = 4MHz, VCO = 352 MHz */ + 0x02, 0x30, /* MCLK = 88 MHz */ + 0x03, 0x00, /* ACR output 0 */ + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x05, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x00, /* DAC output 0 */ + 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1/OP0 normal, val = 1 (LNB power on) */ + 0x0d, 0x82, /* DC offset compensation = on, beta_agc1 = 2 */ + 0x0f, 0x92, /* AGC1R */ + 0x10, 0x34, /* AGC2O */ + 0x11, 0x84, /* TLSR */ + 0x12, 0xb9, /* CFD */ + 0x15, 0xc9, /* lock detector threshold */ + 0x28, 0x00, /* out imp: normal, type: parallel, FEC mode: QPSK */ + 0x33, 0xfc, /* RS control */ + 0x34, 0x93, /* count viterbi bit errors per 2E18 bytes */ + 0xff, 0xff +}; + + +static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } + else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } + else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } + else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } + else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } + else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio ) & 0xf0); + + return 0; +} + +static int alps_bsbe1_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + int ret; + u8 data[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + struct i2c_adapter *i2c = fe->tuner_priv; + + if ((p->frequency < 950000) || (p->frequency > 2150000)) + return -EINVAL; + + div = p->frequency / 1000; + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1; + data[3] = 0xe0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + ret = i2c_transfer(i2c, &msg, 1); + return (ret != 1) ? -EIO : 0; +} + +static struct stv0299_config alps_bsbe1_config = { + .demod_address = 0x68, + .inittab = alps_bsbe1_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsbe1_set_symbol_rate, +}; + +#endif diff --git a/drivers/media/dvb-frontends/bsru6.h b/drivers/media/dvb-frontends/bsru6.h new file mode 100644 index 00000000..c2a578e1 --- /dev/null +++ b/drivers/media/dvb-frontends/bsru6.h @@ -0,0 +1,143 @@ +/* + * bsru6.h - ALPS BSRU6 tuner support (moved from budget-ci.c) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef BSRU6_H +#define BSRU6_H + +static u8 alps_bsru6_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x52, + 0xff, 0xff +}; + +static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); + + return 0; +} + +static int alps_bsru6_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct i2c_adapter *i2c = fe->tuner_priv; + + if ((p->frequency < 950000) || (p->frequency > 2150000)) + return -EINVAL; + + div = (p->frequency + (125 - 1)) / 125; /* round correctly */ + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; + buf[3] = 0xC4; + + if (p->frequency > 1530000) + buf[3] = 0xc0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(i2c, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct stv0299_config alps_bsru6_config = { + .demod_address = 0x68, + .inittab = alps_bsru6_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, +}; + +#endif diff --git a/drivers/media/dvb-frontends/cx22700.c b/drivers/media/dvb-frontends/cx22700.c new file mode 100644 index 00000000..3d399d9a --- /dev/null +++ b/drivers/media/dvb-frontends/cx22700.c @@ -0,0 +1,443 @@ +/* + Conexant cx22700 DVB OFDM demodulator driver + + Copyright (C) 2001-2002 Convergence Integrated Media GmbH + Holger Waechtler + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "cx22700.h" + + +struct cx22700_state { + + struct i2c_adapter* i2c; + + const struct cx22700_config* config; + + struct dvb_frontend frontend; +}; + + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "cx22700: " args); \ + } while (0) + +static u8 init_tab [] = { + 0x04, 0x10, + 0x05, 0x09, + 0x06, 0x00, + 0x08, 0x04, + 0x09, 0x00, + 0x0a, 0x01, + 0x15, 0x40, + 0x16, 0x10, + 0x17, 0x87, + 0x18, 0x17, + 0x1a, 0x10, + 0x25, 0x04, + 0x2e, 0x00, + 0x39, 0x00, + 0x3a, 0x04, + 0x45, 0x08, + 0x46, 0x02, + 0x47, 0x05, +}; + + +static int cx22700_writereg (struct cx22700_state* state, u8 reg, u8 data) +{ + int ret; + u8 buf [] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + + dprintk ("%s\n", __func__); + + ret = i2c_transfer (state->i2c, &msg, 1); + + if (ret != 1) + printk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + __func__, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static int cx22700_readreg (struct cx22700_state* state, u8 reg) +{ + int ret; + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + dprintk ("%s\n", __func__); + + ret = i2c_transfer (state->i2c, msg, 2); + + if (ret != 2) return -EIO; + + return b1[0]; +} + +static int cx22700_set_inversion (struct cx22700_state* state, int inversion) +{ + u8 val; + + dprintk ("%s\n", __func__); + + switch (inversion) { + case INVERSION_AUTO: + return -EOPNOTSUPP; + case INVERSION_ON: + val = cx22700_readreg (state, 0x09); + return cx22700_writereg (state, 0x09, val | 0x01); + case INVERSION_OFF: + val = cx22700_readreg (state, 0x09); + return cx22700_writereg (state, 0x09, val & 0xfe); + default: + return -EINVAL; + } +} + +static int cx22700_set_tps(struct cx22700_state *state, + struct dtv_frontend_properties *p) +{ + static const u8 qam_tab [4] = { 0, 1, 0, 2 }; + static const u8 fec_tab [6] = { 0, 1, 2, 0, 3, 4 }; + u8 val; + + dprintk ("%s\n", __func__); + + if (p->code_rate_HP < FEC_1_2 || p->code_rate_HP > FEC_7_8) + return -EINVAL; + + if (p->code_rate_LP < FEC_1_2 || p->code_rate_LP > FEC_7_8) + return -EINVAL; + + if (p->code_rate_HP == FEC_4_5 || p->code_rate_LP == FEC_4_5) + return -EINVAL; + + if ((int)p->guard_interval < GUARD_INTERVAL_1_32 || + p->guard_interval > GUARD_INTERVAL_1_4) + return -EINVAL; + + if (p->transmission_mode != TRANSMISSION_MODE_2K && + p->transmission_mode != TRANSMISSION_MODE_8K) + return -EINVAL; + + if (p->modulation != QPSK && + p->modulation != QAM_16 && + p->modulation != QAM_64) + return -EINVAL; + + if ((int)p->hierarchy < HIERARCHY_NONE || + p->hierarchy > HIERARCHY_4) + return -EINVAL; + + if (p->bandwidth_hz > 8000000 || p->bandwidth_hz < 6000000) + return -EINVAL; + + if (p->bandwidth_hz == 7000000) + cx22700_writereg (state, 0x09, cx22700_readreg (state, 0x09 | 0x10)); + else + cx22700_writereg (state, 0x09, cx22700_readreg (state, 0x09 & ~0x10)); + + val = qam_tab[p->modulation - QPSK]; + val |= p->hierarchy - HIERARCHY_NONE; + + cx22700_writereg (state, 0x04, val); + + val = fec_tab[p->code_rate_HP - FEC_1_2] << 3; + val |= fec_tab[p->code_rate_LP - FEC_1_2]; + + cx22700_writereg (state, 0x05, val); + + val = (p->guard_interval - GUARD_INTERVAL_1_32) << 2; + val |= p->transmission_mode - TRANSMISSION_MODE_2K; + + cx22700_writereg (state, 0x06, val); + + cx22700_writereg (state, 0x08, 0x04 | 0x02); /* use user tps parameters */ + cx22700_writereg (state, 0x08, 0x04); /* restart acquisition */ + + return 0; +} + +static int cx22700_get_tps(struct cx22700_state *state, + struct dtv_frontend_properties *p) +{ + static const fe_modulation_t qam_tab [3] = { QPSK, QAM_16, QAM_64 }; + static const fe_code_rate_t fec_tab [5] = { FEC_1_2, FEC_2_3, FEC_3_4, + FEC_5_6, FEC_7_8 }; + u8 val; + + dprintk ("%s\n", __func__); + + if (!(cx22700_readreg(state, 0x07) & 0x20)) /* tps valid? */ + return -EAGAIN; + + val = cx22700_readreg (state, 0x01); + + if ((val & 0x7) > 4) + p->hierarchy = HIERARCHY_AUTO; + else + p->hierarchy = HIERARCHY_NONE + (val & 0x7); + + if (((val >> 3) & 0x3) > 2) + p->modulation = QAM_AUTO; + else + p->modulation = qam_tab[(val >> 3) & 0x3]; + + val = cx22700_readreg (state, 0x02); + + if (((val >> 3) & 0x07) > 4) + p->code_rate_HP = FEC_AUTO; + else + p->code_rate_HP = fec_tab[(val >> 3) & 0x07]; + + if ((val & 0x07) > 4) + p->code_rate_LP = FEC_AUTO; + else + p->code_rate_LP = fec_tab[val & 0x07]; + + val = cx22700_readreg (state, 0x03); + + p->guard_interval = GUARD_INTERVAL_1_32 + ((val >> 6) & 0x3); + p->transmission_mode = TRANSMISSION_MODE_2K + ((val >> 5) & 0x1); + + return 0; +} + +static int cx22700_init (struct dvb_frontend* fe) + +{ struct cx22700_state* state = fe->demodulator_priv; + int i; + + dprintk("cx22700_init: init chip\n"); + + cx22700_writereg (state, 0x00, 0x02); /* soft reset */ + cx22700_writereg (state, 0x00, 0x00); + + msleep(10); + + for (i=0; idemodulator_priv; + + u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9) + | (cx22700_readreg (state, 0x0e) << 1); + u8 sync = cx22700_readreg (state, 0x07); + + *status = 0; + + if (rs_ber < 0xff00) + *status |= FE_HAS_SIGNAL; + + if (sync & 0x20) + *status |= FE_HAS_CARRIER; + + if (sync & 0x10) + *status |= FE_HAS_VITERBI; + + if (sync & 0x10) + *status |= FE_HAS_SYNC; + + if (*status == 0x0f) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int cx22700_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct cx22700_state* state = fe->demodulator_priv; + + *ber = cx22700_readreg (state, 0x0c) & 0x7f; + cx22700_writereg (state, 0x0c, 0x00); + + return 0; +} + +static int cx22700_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +{ + struct cx22700_state* state = fe->demodulator_priv; + + u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9) + | (cx22700_readreg (state, 0x0e) << 1); + *signal_strength = ~rs_ber; + + return 0; +} + +static int cx22700_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct cx22700_state* state = fe->demodulator_priv; + + u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9) + | (cx22700_readreg (state, 0x0e) << 1); + *snr = ~rs_ber; + + return 0; +} + +static int cx22700_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct cx22700_state* state = fe->demodulator_priv; + + *ucblocks = cx22700_readreg (state, 0x0f); + cx22700_writereg (state, 0x0f, 0x00); + + return 0; +} + +static int cx22700_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct cx22700_state* state = fe->demodulator_priv; + + cx22700_writereg (state, 0x00, 0x02); /* XXX CHECKME: soft reset*/ + cx22700_writereg (state, 0x00, 0x00); + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + cx22700_set_inversion(state, c->inversion); + cx22700_set_tps(state, c); + cx22700_writereg (state, 0x37, 0x01); /* PAL loop filter off */ + cx22700_writereg (state, 0x00, 0x01); /* restart acquire */ + + return 0; +} + +static int cx22700_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct cx22700_state* state = fe->demodulator_priv; + u8 reg09 = cx22700_readreg (state, 0x09); + + c->inversion = reg09 & 0x1 ? INVERSION_ON : INVERSION_OFF; + return cx22700_get_tps(state, c); +} + +static int cx22700_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct cx22700_state* state = fe->demodulator_priv; + + if (enable) { + return cx22700_writereg(state, 0x0a, 0x00); + } else { + return cx22700_writereg(state, 0x0a, 0x01); + } +} + +static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 150; + fesettings->step_size = 166667; + fesettings->max_drift = 166667*2; + return 0; +} + +static void cx22700_release(struct dvb_frontend* fe) +{ + struct cx22700_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops cx22700_ops; + +struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, + struct i2c_adapter* i2c) +{ + struct cx22700_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct cx22700_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* check if the demod is there */ + if (cx22700_readreg(state, 0x07) < 0) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &cx22700_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops cx22700_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Conexant CX22700 DVB-T", + .frequency_min = 470000000, + .frequency_max = 860000000, + .frequency_stepsize = 166667, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_RECOVER + }, + + .release = cx22700_release, + + .init = cx22700_init, + .i2c_gate_ctrl = cx22700_i2c_gate_ctrl, + + .set_frontend = cx22700_set_frontend, + .get_frontend = cx22700_get_frontend, + .get_tune_settings = cx22700_get_tune_settings, + + .read_status = cx22700_read_status, + .read_ber = cx22700_read_ber, + .read_signal_strength = cx22700_read_signal_strength, + .read_snr = cx22700_read_snr, + .read_ucblocks = cx22700_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Conexant CX22700 DVB-T Demodulator driver"); +MODULE_AUTHOR("Holger Waechtler"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(cx22700_attach); diff --git a/drivers/media/dvb-frontends/cx22700.h b/drivers/media/dvb-frontends/cx22700.h new file mode 100644 index 00000000..382a7b1f --- /dev/null +++ b/drivers/media/dvb-frontends/cx22700.h @@ -0,0 +1,46 @@ +/* + Conexant CX22700 DVB OFDM demodulator driver + + Copyright (C) 2001-2002 Convergence Integrated Media GmbH + Holger Waechtler + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef CX22700_H +#define CX22700_H + +#include + +struct cx22700_config +{ + /* the demodulator's i2c address */ + u8 demod_address; +}; + +#if IS_ENABLED(CONFIG_DVB_CX22700) +extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_CX22700 + +#endif // CX22700_H diff --git a/drivers/media/dvb-frontends/cx22702.c b/drivers/media/dvb-frontends/cx22702.c new file mode 100644 index 00000000..edc8eafc --- /dev/null +++ b/drivers/media/dvb-frontends/cx22702.c @@ -0,0 +1,653 @@ +/* + Conexant 22702 DVB OFDM demodulator driver + + based on: + Alps TDMB7 DVB OFDM demodulator driver + + Copyright (C) 2001-2002 Convergence Integrated Media GmbH + Holger Waechtler + + Copyright (C) 2004 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "cx22702.h" + +struct cx22702_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct cx22702_config *config; + + struct dvb_frontend frontend; + + /* previous uncorrected block counter */ + u8 prevUCBlocks; +}; + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +#define dprintk if (debug) printk + +/* Register values to initialise the demod */ +static const u8 init_tab[] = { + 0x00, 0x00, /* Stop acquisition */ + 0x0B, 0x06, + 0x09, 0x01, + 0x0D, 0x41, + 0x16, 0x32, + 0x20, 0x0A, + 0x21, 0x17, + 0x24, 0x3e, + 0x26, 0xff, + 0x27, 0x10, + 0x28, 0x00, + 0x29, 0x00, + 0x2a, 0x10, + 0x2b, 0x00, + 0x2c, 0x10, + 0x2d, 0x00, + 0x48, 0xd4, + 0x49, 0x56, + 0x6b, 0x1e, + 0xc8, 0x02, + 0xf9, 0x00, + 0xfa, 0x00, + 0xfb, 0x00, + 0xfc, 0x00, + 0xfd, 0x00, +}; + +static int cx22702_writereg(struct cx22702_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, .flags = 0, + .buf = buf, .len = 2 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (unlikely(ret != 1)) { + printk(KERN_ERR + "%s: error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + __func__, reg, data, ret); + return -1; + } + + return 0; +} + +static u8 cx22702_readreg(struct cx22702_state *state, u8 reg) +{ + int ret; + u8 data; + + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, + .buf = ®, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = &data, .len = 1 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (unlikely(ret != 2)) { + printk(KERN_ERR "%s: error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + return 0; + } + + return data; +} + +static int cx22702_set_inversion(struct cx22702_state *state, int inversion) +{ + u8 val; + + val = cx22702_readreg(state, 0x0C); + switch (inversion) { + case INVERSION_AUTO: + return -EOPNOTSUPP; + case INVERSION_ON: + val |= 0x01; + break; + case INVERSION_OFF: + val &= 0xfe; + break; + default: + return -EINVAL; + } + return cx22702_writereg(state, 0x0C, val); +} + +/* Retrieve the demod settings */ +static int cx22702_get_tps(struct cx22702_state *state, + struct dtv_frontend_properties *p) +{ + u8 val; + + /* Make sure the TPS regs are valid */ + if (!(cx22702_readreg(state, 0x0A) & 0x20)) + return -EAGAIN; + + val = cx22702_readreg(state, 0x01); + switch ((val & 0x18) >> 3) { + case 0: + p->modulation = QPSK; + break; + case 1: + p->modulation = QAM_16; + break; + case 2: + p->modulation = QAM_64; + break; + } + switch (val & 0x07) { + case 0: + p->hierarchy = HIERARCHY_NONE; + break; + case 1: + p->hierarchy = HIERARCHY_1; + break; + case 2: + p->hierarchy = HIERARCHY_2; + break; + case 3: + p->hierarchy = HIERARCHY_4; + break; + } + + + val = cx22702_readreg(state, 0x02); + switch ((val & 0x38) >> 3) { + case 0: + p->code_rate_HP = FEC_1_2; + break; + case 1: + p->code_rate_HP = FEC_2_3; + break; + case 2: + p->code_rate_HP = FEC_3_4; + break; + case 3: + p->code_rate_HP = FEC_5_6; + break; + case 4: + p->code_rate_HP = FEC_7_8; + break; + } + switch (val & 0x07) { + case 0: + p->code_rate_LP = FEC_1_2; + break; + case 1: + p->code_rate_LP = FEC_2_3; + break; + case 2: + p->code_rate_LP = FEC_3_4; + break; + case 3: + p->code_rate_LP = FEC_5_6; + break; + case 4: + p->code_rate_LP = FEC_7_8; + break; + } + + val = cx22702_readreg(state, 0x03); + switch ((val & 0x0c) >> 2) { + case 0: + p->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->guard_interval = GUARD_INTERVAL_1_4; + break; + } + switch (val & 0x03) { + case 0: + p->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->transmission_mode = TRANSMISSION_MODE_8K; + break; + } + + return 0; +} + +static int cx22702_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct cx22702_state *state = fe->demodulator_priv; + u8 val; + + dprintk("%s(%d)\n", __func__, enable); + val = cx22702_readreg(state, 0x0D); + if (enable) + val &= 0xfe; + else + val |= 0x01; + return cx22702_writereg(state, 0x0D, val); +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int cx22702_set_tps(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + u8 val; + struct cx22702_state *state = fe->demodulator_priv; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* set inversion */ + cx22702_set_inversion(state, p->inversion); + + /* set bandwidth */ + val = cx22702_readreg(state, 0x0C) & 0xcf; + switch (p->bandwidth_hz) { + case 6000000: + val |= 0x20; + break; + case 7000000: + val |= 0x10; + break; + case 8000000: + break; + default: + dprintk("%s: invalid bandwidth\n", __func__); + return -EINVAL; + } + cx22702_writereg(state, 0x0C, val); + + p->code_rate_LP = FEC_AUTO; /* temp hack as manual not working */ + + /* use auto configuration? */ + if ((p->hierarchy == HIERARCHY_AUTO) || + (p->modulation == QAM_AUTO) || + (p->code_rate_HP == FEC_AUTO) || + (p->code_rate_LP == FEC_AUTO) || + (p->guard_interval == GUARD_INTERVAL_AUTO) || + (p->transmission_mode == TRANSMISSION_MODE_AUTO)) { + + /* TPS Source - use hardware driven values */ + cx22702_writereg(state, 0x06, 0x10); + cx22702_writereg(state, 0x07, 0x9); + cx22702_writereg(state, 0x08, 0xC1); + cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B) + & 0xfc); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40); + cx22702_writereg(state, 0x00, 0x01); /* Begin acquisition */ + dprintk("%s: Autodetecting\n", __func__); + return 0; + } + + /* manually programmed values */ + switch (p->modulation) { /* mask 0x18 */ + case QPSK: + val = 0x00; + break; + case QAM_16: + val = 0x08; + break; + case QAM_64: + val = 0x10; + break; + default: + dprintk("%s: invalid modulation\n", __func__); + return -EINVAL; + } + switch (p->hierarchy) { /* mask 0x07 */ + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + val |= 0x01; + break; + case HIERARCHY_2: + val |= 0x02; + break; + case HIERARCHY_4: + val |= 0x03; + break; + default: + dprintk("%s: invalid hierarchy\n", __func__); + return -EINVAL; + } + cx22702_writereg(state, 0x06, val); + + switch (p->code_rate_HP) { /* mask 0x38 */ + case FEC_NONE: + case FEC_1_2: + val = 0x00; + break; + case FEC_2_3: + val = 0x08; + break; + case FEC_3_4: + val = 0x10; + break; + case FEC_5_6: + val = 0x18; + break; + case FEC_7_8: + val = 0x20; + break; + default: + dprintk("%s: invalid code_rate_HP\n", __func__); + return -EINVAL; + } + switch (p->code_rate_LP) { /* mask 0x07 */ + case FEC_NONE: + case FEC_1_2: + break; + case FEC_2_3: + val |= 0x01; + break; + case FEC_3_4: + val |= 0x02; + break; + case FEC_5_6: + val |= 0x03; + break; + case FEC_7_8: + val |= 0x04; + break; + default: + dprintk("%s: invalid code_rate_LP\n", __func__); + return -EINVAL; + } + cx22702_writereg(state, 0x07, val); + + switch (p->guard_interval) { /* mask 0x0c */ + case GUARD_INTERVAL_1_32: + val = 0x00; + break; + case GUARD_INTERVAL_1_16: + val = 0x04; + break; + case GUARD_INTERVAL_1_8: + val = 0x08; + break; + case GUARD_INTERVAL_1_4: + val = 0x0c; + break; + default: + dprintk("%s: invalid guard_interval\n", __func__); + return -EINVAL; + } + switch (p->transmission_mode) { /* mask 0x03 */ + case TRANSMISSION_MODE_2K: + break; + case TRANSMISSION_MODE_8K: + val |= 0x1; + break; + default: + dprintk("%s: invalid transmission_mode\n", __func__); + return -EINVAL; + } + cx22702_writereg(state, 0x08, val); + cx22702_writereg(state, 0x0B, + (cx22702_readreg(state, 0x0B) & 0xfc) | 0x02); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40); + + /* Begin channel acquisition */ + cx22702_writereg(state, 0x00, 0x01); + + return 0; +} + +/* Reset the demod hardware and reset all of the configuration registers + to a default state. */ +static int cx22702_init(struct dvb_frontend *fe) +{ + int i; + struct cx22702_state *state = fe->demodulator_priv; + + cx22702_writereg(state, 0x00, 0x02); + + msleep(10); + + for (i = 0; i < ARRAY_SIZE(init_tab); i += 2) + cx22702_writereg(state, init_tab[i], init_tab[i + 1]); + + cx22702_writereg(state, 0xf8, (state->config->output_mode << 1) + & 0x02); + + cx22702_i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int cx22702_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct cx22702_state *state = fe->demodulator_priv; + u8 reg0A; + u8 reg23; + + *status = 0; + + reg0A = cx22702_readreg(state, 0x0A); + reg23 = cx22702_readreg(state, 0x23); + + dprintk("%s: status demod=0x%02x agc=0x%02x\n" + , __func__, reg0A, reg23); + + if (reg0A & 0x10) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + *status |= FE_HAS_SYNC; + } + + if (reg0A & 0x20) + *status |= FE_HAS_CARRIER; + + if (reg23 < 0xf0) + *status |= FE_HAS_SIGNAL; + + return 0; +} + +static int cx22702_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct cx22702_state *state = fe->demodulator_priv; + + if (cx22702_readreg(state, 0xE4) & 0x02) { + /* Realtime statistics */ + *ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | (cx22702_readreg(state, 0xDF) & 0x7F); + } else { + /* Averagtine statistics */ + *ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | cx22702_readreg(state, 0xDF); + } + + return 0; +} + +static int cx22702_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + struct cx22702_state *state = fe->demodulator_priv; + u8 reg23; + + /* + * Experience suggests that the strength signal register works as + * follows: + * - In the absence of signal, value is 0xff. + * - In the presence of a weak signal, bit 7 is set, not sure what + * the lower 7 bits mean. + * - In the presence of a strong signal, the register holds a 7-bit + * value (bit 7 is cleared), with greater values standing for + * weaker signals. + */ + reg23 = cx22702_readreg(state, 0x23); + if (reg23 & 0x80) { + *signal_strength = 0; + } else { + reg23 = ~reg23 & 0x7f; + /* Scale to 16 bit */ + *signal_strength = (reg23 << 9) | (reg23 << 2) | (reg23 >> 5); + } + + return 0; +} + +static int cx22702_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct cx22702_state *state = fe->demodulator_priv; + + u16 rs_ber; + if (cx22702_readreg(state, 0xE4) & 0x02) { + /* Realtime statistics */ + rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | (cx22702_readreg(state, 0xDF) & 0x7F); + } else { + /* Averagine statistics */ + rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 8 + | cx22702_readreg(state, 0xDF); + } + *snr = ~rs_ber; + + return 0; +} + +static int cx22702_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct cx22702_state *state = fe->demodulator_priv; + + u8 _ucblocks; + + /* RS Uncorrectable Packet Count then reset */ + _ucblocks = cx22702_readreg(state, 0xE3); + if (state->prevUCBlocks < _ucblocks) + *ucblocks = (_ucblocks - state->prevUCBlocks); + else + *ucblocks = state->prevUCBlocks - _ucblocks; + state->prevUCBlocks = _ucblocks; + + return 0; +} + +static int cx22702_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct cx22702_state *state = fe->demodulator_priv; + + u8 reg0C = cx22702_readreg(state, 0x0C); + + c->inversion = reg0C & 0x1 ? INVERSION_ON : INVERSION_OFF; + return cx22702_get_tps(state, c); +} + +static int cx22702_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void cx22702_release(struct dvb_frontend *fe) +{ + struct cx22702_state *state = fe->demodulator_priv; + kfree(state); +} + +static const struct dvb_frontend_ops cx22702_ops; + +struct dvb_frontend *cx22702_attach(const struct cx22702_config *config, + struct i2c_adapter *i2c) +{ + struct cx22702_state *state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* check if the demod is there */ + if (cx22702_readreg(state, 0x1f) != 0x3) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &cx22702_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(cx22702_attach); + +static const struct dvb_frontend_ops cx22702_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Conexant CX22702 DVB-T", + .frequency_min = 177000000, + .frequency_max = 858000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER + }, + + .release = cx22702_release, + + .init = cx22702_init, + .i2c_gate_ctrl = cx22702_i2c_gate_ctrl, + + .set_frontend = cx22702_set_tps, + .get_frontend = cx22702_get_frontend, + .get_tune_settings = cx22702_get_tune_settings, + + .read_status = cx22702_read_status, + .read_ber = cx22702_read_ber, + .read_signal_strength = cx22702_read_signal_strength, + .read_snr = cx22702_read_snr, + .read_ucblocks = cx22702_read_ucblocks, +}; + +MODULE_DESCRIPTION("Conexant CX22702 DVB-T Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/cx22702.h b/drivers/media/dvb-frontends/cx22702.h new file mode 100644 index 00000000..0b1a6c2f --- /dev/null +++ b/drivers/media/dvb-frontends/cx22702.h @@ -0,0 +1,58 @@ +/* + Conexant 22702 DVB OFDM demodulator driver + + based on: + Alps TDMB7 DVB OFDM demodulator driver + + Copyright (C) 2001-2002 Convergence Integrated Media GmbH + Holger Waechtler + + Copyright (C) 2004 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef CX22702_H +#define CX22702_H + +#include +#include + +struct cx22702_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* serial/parallel output */ +#define CX22702_PARALLEL_OUTPUT 0 +#define CX22702_SERIAL_OUTPUT 1 + u8 output_mode; +}; + +#if IS_ENABLED(CONFIG_DVB_CX22702) +extern struct dvb_frontend *cx22702_attach( + const struct cx22702_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *cx22702_attach( + const struct cx22702_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/cx24110.c b/drivers/media/dvb-frontends/cx24110.c new file mode 100644 index 00000000..0cd6927e --- /dev/null +++ b/drivers/media/dvb-frontends/cx24110.c @@ -0,0 +1,666 @@ +/* + cx24110 - Single Chip Satellite Channel Receiver driver module + + Copyright (C) 2002 Peter Hettkamp based on + work + Copyright (C) 1999 Convergence Integrated Media GmbH + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "cx24110.h" + + +struct cx24110_state { + + struct i2c_adapter* i2c; + + const struct cx24110_config* config; + + struct dvb_frontend frontend; + + u32 lastber; + u32 lastbler; + u32 lastesn0; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "cx24110: " args); \ + } while (0) + +static struct {u8 reg; u8 data;} cx24110_regdata[]= + /* Comments beginning with @ denote this value should + be the default */ + {{0x09,0x01}, /* SoftResetAll */ + {0x09,0x00}, /* release reset */ + {0x01,0xe8}, /* MSB of code rate 27.5MS/s */ + {0x02,0x17}, /* middle byte " */ + {0x03,0x29}, /* LSB " */ + {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */ + {0x06,0xa5}, /* @ PLL 60MHz */ + {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */ + {0x0a,0x00}, /* @ partial chip disables, do not set */ + {0x0b,0x01}, /* set output clock in gapped mode, start signal low + active for first byte */ + {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */ + {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */ + {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1 + to avoid starting the BER counter. Reset the + CRC test bit. Finite counting selected */ + {0x15,0xff}, /* @ size of the limited time window for RS BER + estimation. It is *256 RS blocks, this + gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */ + {0x16,0x00}, /* @ enable all RS output ports */ + {0x17,0x04}, /* @ time window allowed for the RS to sync */ + {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned + for automatically */ + /* leave the current code rate and normalization + registers as they are after reset... */ + {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting + only once */ + {0x23,0x18}, /* @ size of the limited time window for Viterbi BER + estimation. It is *65536 channel bits, i.e. + approx. 38ms at 27.5MS/s, rate 3/4 */ + {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */ + /* leave front-end AGC parameters at default values */ + /* leave decimation AGC parameters at default values */ + {0x35,0x40}, /* disable all interrupts. They are not connected anyway */ + {0x36,0xff}, /* clear all interrupt pending flags */ + {0x37,0x00}, /* @ fully enable AutoAcqq state machine */ + {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */ + /* leave the equalizer parameters on their default values */ + /* leave the final AGC parameters on their default values */ + {0x41,0x00}, /* @ MSB of front-end derotator frequency */ + {0x42,0x00}, /* @ middle bytes " */ + {0x43,0x00}, /* @ LSB " */ + /* leave the carrier tracking loop parameters on default */ + /* leave the bit timing loop parameters at default */ + {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */ + /* the cx24108 data sheet for symbol rates above 15MS/s */ + {0x57,0x00}, /* @ Filter sigma delta enabled, positive */ + {0x61,0x95}, /* GPIO pins 1-4 have special function */ + {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */ + {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */ + {0x64,0x20}, /* GPIO 6 is input, all others are outputs */ + {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */ + {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */ + {0x73,0x00}, /* @ disable several demod bypasses */ + {0x74,0x00}, /* @ " */ + {0x75,0x00} /* @ " */ + /* the remaining registers are for SEC */ + }; + + +static int cx24110_writereg (struct cx24110_state* state, int reg, int data) +{ + u8 buf [] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + int err; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + dprintk ("%s: writereg error (err == %i, reg == 0x%02x," + " data == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +static int cx24110_readreg (struct cx24110_state* state, u8 reg) +{ + int ret; + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) return ret; + + return b1[0]; +} + +static int cx24110_set_inversion (struct cx24110_state* state, fe_spectral_inversion_t inversion) +{ +/* fixme (low): error handling */ + + switch (inversion) { + case INVERSION_OFF: + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); + /* AcqSpectrInvDis on. No idea why someone should want this */ + cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7); + /* Initial value 0 at start of acq */ + cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef); + /* current value 0 */ + /* The cx24110 manual tells us this reg is read-only. + But what the heck... set it ayways */ + break; + case INVERSION_ON: + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); + /* AcqSpectrInvDis on. No idea why someone should want this */ + cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08); + /* Initial value 1 at start of acq */ + cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10); + /* current value 1 */ + break; + case INVERSION_AUTO: + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe); + /* AcqSpectrInvDis off. Leave initial & current states as is */ + break; + default: + return -EINVAL; + } + + return 0; +} + +static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec) +{ +/* fixme (low): error handling */ + + static const int rate[]={-1,1,2,3,5,7,-1}; + static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1}; + static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1}; + + /* Well, the AutoAcq engine of the cx24106 and 24110 automatically + searches all enabled viterbi rates, and can handle non-standard + rates as well. */ + + if (fec>FEC_AUTO) + fec=FEC_AUTO; + + if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */ + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf); + /* clear AcqVitDis bit */ + cx24110_writereg(state,0x18,0xae); + /* allow all DVB standard code rates */ + cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|0x3); + /* set nominal Viterbi rate 3/4 */ + cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|0x3); + /* set current Viterbi rate 3/4 */ + cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06); + /* set the puncture registers for code rate 3/4 */ + return 0; + } else { + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20); + /* set AcqVitDis bit */ + if(rate[fec]>0) { + cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|rate[fec]); + /* set nominal Viterbi rate */ + cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|rate[fec]); + /* set current Viterbi rate */ + cx24110_writereg(state,0x1a,g1[fec]); + cx24110_writereg(state,0x1b,g2[fec]); + /* not sure if this is the right way: I always used AutoAcq mode */ + } else + return -EOPNOTSUPP; +/* fixme (low): which is the correct return code? */ + } + return 0; +} + +static fe_code_rate_t cx24110_get_fec (struct cx24110_state* state) +{ + int i; + + i=cx24110_readreg(state,0x22)&0x0f; + if(!(i&0x08)) { + return FEC_1_2 + i - 1; + } else { +/* fixme (low): a special code rate has been selected. In theory, we need to + return a denominator value, a numerator value, and a pair of puncture + maps to correctly describe this mode. But this should never happen in + practice, because it cannot be set by cx24110_get_fec. */ + return FEC_NONE; + } +} + +static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate) +{ +/* fixme (low): add error handling */ + u32 ratio; + u32 tmp, fclk, BDRI; + + static const u32 bands[]={5000000UL,15000000UL,90999000UL/2}; + int i; + + dprintk("cx24110 debug: entering %s(%d)\n",__func__,srate); + if (srate>90999000UL/2) + srate=90999000UL/2; + if (srate<500000) + srate=500000; + + for(i = 0; (i < ARRAY_SIZE(bands)) && (srate>bands[i]); i++) + ; + /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz, + and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult, + R06[3:0] PLLphaseDetGain */ + tmp=cx24110_readreg(state,0x07)&0xfc; + if(srate<90999000UL/4) { /* sample rate 45MHz*/ + cx24110_writereg(state,0x07,tmp); + cx24110_writereg(state,0x06,0x78); + fclk=90999000UL/2; + } else if(srate<60666000UL/2) { /* sample rate 60MHz */ + cx24110_writereg(state,0x07,tmp|0x1); + cx24110_writereg(state,0x06,0xa5); + fclk=60666000UL; + } else if(srate<80888000UL/2) { /* sample rate 80MHz */ + cx24110_writereg(state,0x07,tmp|0x2); + cx24110_writereg(state,0x06,0x87); + fclk=80888000UL; + } else { /* sample rate 90MHz */ + cx24110_writereg(state,0x07,tmp|0x3); + cx24110_writereg(state,0x06,0x78); + fclk=90999000UL; + } + dprintk("cx24110 debug: fclk %d Hz\n",fclk); + /* we need to divide two integers with approx. 27 bits in 32 bit + arithmetic giving a 25 bit result */ + /* the maximum dividend is 90999000/2, 0x02b6446c, this number is + also the most complex divisor. Hence, the dividend has, + assuming 32bit unsigned arithmetic, 6 clear bits on top, the + divisor 2 unused bits at the bottom. Also, the quotient is + always less than 1/2. Borrowed from VES1893.c, of course */ + + tmp=srate<<6; + BDRI=fclk>>2; + ratio=(tmp/BDRI); + + tmp=(tmp%BDRI)<<8; + ratio=(ratio<<8)+(tmp/BDRI); + + tmp=(tmp%BDRI)<<8; + ratio=(ratio<<8)+(tmp/BDRI); + + tmp=(tmp%BDRI)<<1; + ratio=(ratio<<1)+(tmp/BDRI); + + dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]); + dprintk("fclk = %d\n", fclk); + dprintk("ratio= %08x\n", ratio); + + cx24110_writereg(state, 0x1, (ratio>>16)&0xff); + cx24110_writereg(state, 0x2, (ratio>>8)&0xff); + cx24110_writereg(state, 0x3, (ratio)&0xff); + + return 0; + +} + +static int _cx24110_pll_write (struct dvb_frontend* fe, const u8 buf[], int len) +{ + struct cx24110_state *state = fe->demodulator_priv; + + if (len != 3) + return -EINVAL; + +/* tuner data is 21 bits long, must be left-aligned in data */ +/* tuner cx24108 is written through a dedicated 3wire interface on the demod chip */ +/* FIXME (low): add error handling, avoid infinite loops if HW fails... */ + + cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */ + cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */ + + /* if the auto tuner writer is still busy, clear it out */ + while (cx24110_readreg(state,0x6d)&0x80) + cx24110_writereg(state,0x72,0); + + /* write the topmost 8 bits */ + cx24110_writereg(state,0x72,buf[0]); + + /* wait for the send to be completed */ + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + ; + + /* send another 8 bytes */ + cx24110_writereg(state,0x72,buf[1]); + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + ; + + /* and the topmost 5 bits of this byte */ + cx24110_writereg(state,0x72,buf[2]); + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + ; + + /* now strobe the enable line once */ + cx24110_writereg(state,0x6d,0x32); + cx24110_writereg(state,0x6d,0x30); + + return 0; +} + +static int cx24110_initfe(struct dvb_frontend* fe) +{ + struct cx24110_state *state = fe->demodulator_priv; +/* fixme (low): error handling */ + int i; + + dprintk("%s: init chip\n", __func__); + + for(i = 0; i < ARRAY_SIZE(cx24110_regdata); i++) { + cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data); + } + + return 0; +} + +static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct cx24110_state *state = fe->demodulator_priv; + + switch (voltage) { + case SEC_VOLTAGE_13: + return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&0x3b)|0xc0); + case SEC_VOLTAGE_18: + return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&0x3b)|0x40); + default: + return -EINVAL; + }; +} + +static int cx24110_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +{ + int rv, bit; + struct cx24110_state *state = fe->demodulator_priv; + unsigned long timeout; + + if (burst == SEC_MINI_A) + bit = 0x00; + else if (burst == SEC_MINI_B) + bit = 0x08; + else + return -EINVAL; + + rv = cx24110_readreg(state, 0x77); + if (!(rv & 0x04)) + cx24110_writereg(state, 0x77, rv | 0x04); + + rv = cx24110_readreg(state, 0x76); + cx24110_writereg(state, 0x76, ((rv & 0x90) | 0x40 | bit)); + timeout = jiffies + msecs_to_jiffies(100); + while (!time_after(jiffies, timeout) && !(cx24110_readreg(state, 0x76) & 0x40)) + ; /* wait for LNB ready */ + + return 0; +} + +static int cx24110_send_diseqc_msg(struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd *cmd) +{ + int i, rv; + struct cx24110_state *state = fe->demodulator_priv; + unsigned long timeout; + + if (cmd->msg_len < 3 || cmd->msg_len > 6) + return -EINVAL; /* not implemented */ + + for (i = 0; i < cmd->msg_len; i++) + cx24110_writereg(state, 0x79 + i, cmd->msg[i]); + + rv = cx24110_readreg(state, 0x77); + if (rv & 0x04) { + cx24110_writereg(state, 0x77, rv & ~0x04); + msleep(30); /* reportedly fixes switching problems */ + } + + rv = cx24110_readreg(state, 0x76); + + cx24110_writereg(state, 0x76, ((rv & 0x90) | 0x40) | ((cmd->msg_len-3) & 3)); + timeout = jiffies + msecs_to_jiffies(100); + while (!time_after(jiffies, timeout) && !(cx24110_readreg(state, 0x76) & 0x40)) + ; /* wait for LNB ready */ + + return 0; +} + +static int cx24110_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct cx24110_state *state = fe->demodulator_priv; + + int sync = cx24110_readreg (state, 0x55); + + *status = 0; + + if (sync & 0x10) + *status |= FE_HAS_SIGNAL; + + if (sync & 0x08) + *status |= FE_HAS_CARRIER; + + sync = cx24110_readreg (state, 0x08); + + if (sync & 0x40) + *status |= FE_HAS_VITERBI; + + if (sync & 0x20) + *status |= FE_HAS_SYNC; + + if ((sync & 0x60) == 0x60) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int cx24110_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct cx24110_state *state = fe->demodulator_priv; + + /* fixme (maybe): value range is 16 bit. Scale? */ + if(cx24110_readreg(state,0x24)&0x10) { + /* the Viterbi error counter has finished one counting window */ + cx24110_writereg(state,0x24,0x04); /* select the ber reg */ + state->lastber=cx24110_readreg(state,0x25)| + (cx24110_readreg(state,0x26)<<8); + cx24110_writereg(state,0x24,0x04); /* start new count window */ + cx24110_writereg(state,0x24,0x14); + } + *ber = state->lastber; + + return 0; +} + +static int cx24110_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +{ + struct cx24110_state *state = fe->demodulator_priv; + +/* no provision in hardware. Read the frontend AGC accumulator. No idea how to scale this, but I know it is 2s complement */ + u8 signal = cx24110_readreg (state, 0x27)+128; + *signal_strength = (signal << 8) | signal; + + return 0; +} + +static int cx24110_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct cx24110_state *state = fe->demodulator_priv; + + /* no provision in hardware. Can be computed from the Es/N0 estimator, but I don't know how. */ + if(cx24110_readreg(state,0x6a)&0x80) { + /* the Es/N0 error counter has finished one counting window */ + state->lastesn0=cx24110_readreg(state,0x69)| + (cx24110_readreg(state,0x68)<<8); + cx24110_writereg(state,0x6a,0x84); /* start new count window */ + } + *snr = state->lastesn0; + + return 0; +} + +static int cx24110_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct cx24110_state *state = fe->demodulator_priv; + + if(cx24110_readreg(state,0x10)&0x40) { + /* the RS error counter has finished one counting window */ + cx24110_writereg(state,0x10,0x60); /* select the byer reg */ + (void)(cx24110_readreg(state, 0x12) | + (cx24110_readreg(state, 0x13) << 8) | + (cx24110_readreg(state, 0x14) << 16)); + cx24110_writereg(state,0x10,0x70); /* select the bler reg */ + state->lastbler=cx24110_readreg(state,0x12)| + (cx24110_readreg(state,0x13)<<8)| + (cx24110_readreg(state,0x14)<<16); + cx24110_writereg(state,0x10,0x20); /* start new count window */ + } + *ucblocks = state->lastbler; + + return 0; +} + +static int cx24110_set_frontend(struct dvb_frontend *fe) +{ + struct cx24110_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + cx24110_set_inversion(state, p->inversion); + cx24110_set_fec(state, p->fec_inner); + cx24110_set_symbolrate(state, p->symbol_rate); + cx24110_writereg(state,0x04,0x05); /* start acquisition */ + + return 0; +} + +static int cx24110_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct cx24110_state *state = fe->demodulator_priv; + s32 afc; unsigned sclk; + +/* cannot read back tuner settings (freq). Need to have some private storage */ + + sclk = cx24110_readreg (state, 0x07) & 0x03; +/* ok, real AFC (FEDR) freq. is afc/2^24*fsamp, fsamp=45/60/80/90MHz. + * Need 64 bit arithmetic. Is thiss possible in the kernel? */ + if (sclk==0) sclk=90999000L/2L; + else if (sclk==1) sclk=60666000L; + else if (sclk==2) sclk=80888000L; + else sclk=90999000L; + sclk>>=8; + afc = sclk*(cx24110_readreg (state, 0x44)&0x1f)+ + ((sclk*cx24110_readreg (state, 0x45))>>8)+ + ((sclk*cx24110_readreg (state, 0x46))>>16); + + p->frequency += afc; + p->inversion = (cx24110_readreg (state, 0x22) & 0x10) ? + INVERSION_ON : INVERSION_OFF; + p->fec_inner = cx24110_get_fec(state); + + return 0; +} + +static int cx24110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct cx24110_state *state = fe->demodulator_priv; + + return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&~0x10)|(((tone==SEC_TONE_ON))?0x10:0)); +} + +static void cx24110_release(struct dvb_frontend* fe) +{ + struct cx24110_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops cx24110_ops; + +struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, + struct i2c_adapter* i2c) +{ + struct cx24110_state* state = NULL; + int ret; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->lastber = 0; + state->lastbler = 0; + state->lastesn0 = 0; + + /* check if the demod is there */ + ret = cx24110_readreg(state, 0x00); + if ((ret != 0x5a) && (ret != 0x69)) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &cx24110_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops cx24110_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Conexant CX24110 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1011, /* kHz for QPSK frontends */ + .frequency_tolerance = 29500, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_RECOVER + }, + + .release = cx24110_release, + + .init = cx24110_initfe, + .write = _cx24110_pll_write, + .set_frontend = cx24110_set_frontend, + .get_frontend = cx24110_get_frontend, + .read_status = cx24110_read_status, + .read_ber = cx24110_read_ber, + .read_signal_strength = cx24110_read_signal_strength, + .read_snr = cx24110_read_snr, + .read_ucblocks = cx24110_read_ucblocks, + + .diseqc_send_master_cmd = cx24110_send_diseqc_msg, + .set_tone = cx24110_set_tone, + .set_voltage = cx24110_set_voltage, + .diseqc_send_burst = cx24110_diseqc_send_burst, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Conexant CX24110 DVB-S Demodulator driver"); +MODULE_AUTHOR("Peter Hettkamp"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(cx24110_attach); diff --git a/drivers/media/dvb-frontends/cx24110.h b/drivers/media/dvb-frontends/cx24110.h new file mode 100644 index 00000000..527aff1f --- /dev/null +++ b/drivers/media/dvb-frontends/cx24110.h @@ -0,0 +1,61 @@ +/* + cx24110 - Single Chip Satellite Channel Receiver driver module + + Copyright (C) 2002 Peter Hettkamp based on + work + Copyright (C) 1999 Convergence Integrated Media GmbH + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef CX24110_H +#define CX24110_H + +#include + +struct cx24110_config +{ + /* the demodulator's i2c address */ + u8 demod_address; +}; + +static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) +{ + u8 buf[] = { + (u8)((val >> 24) & 0xff), + (u8)((val >> 16) & 0xff), + (u8)((val >> 8) & 0xff) + }; + + if (fe->ops.write) + return fe->ops.write(fe, buf, 3); + return 0; +} + +#if IS_ENABLED(CONFIG_DVB_CX24110) +extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_CX24110 + +#endif // CX24110_H diff --git a/drivers/media/dvb-frontends/cx24113.c b/drivers/media/dvb-frontends/cx24113.c new file mode 100644 index 00000000..3883c3b3 --- /dev/null +++ b/drivers/media/dvb-frontends/cx24113.c @@ -0,0 +1,618 @@ +/* + * Driver for Conexant CX24113/CX24128 Tuner (Satellite) + * + * Copyright (C) 2007-8 Patrick Boettcher + * + * Developed for BBTI / Technisat + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "cx24113.h" + +static int debug; + +#define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0) +#define cx_err(args...) do { printk(KERN_ERR "CX24113: " args); } while (0) + +#define dprintk(args...) \ + do { \ + if (debug) { \ + printk(KERN_DEBUG "CX24113: %s: ", __func__); \ + printk(args); \ + } \ + } while (0) + +struct cx24113_state { + struct i2c_adapter *i2c; + const struct cx24113_config *config; + +#define REV_CX24113 0x23 + u8 rev; + u8 ver; + + u8 icp_mode:1; + +#define ICP_LEVEL1 0 +#define ICP_LEVEL2 1 +#define ICP_LEVEL3 2 +#define ICP_LEVEL4 3 + u8 icp_man:2; + u8 icp_auto_low:2; + u8 icp_auto_mlow:2; + u8 icp_auto_mhi:2; + u8 icp_auto_hi:2; + u8 icp_dig; + +#define LNA_MIN_GAIN 0 +#define LNA_MID_GAIN 1 +#define LNA_MAX_GAIN 2 + u8 lna_gain:2; + + u8 acp_on:1; + + u8 vco_mode:2; + u8 vco_shift:1; +#define VCOBANDSEL_6 0x80 +#define VCOBANDSEL_5 0x01 +#define VCOBANDSEL_4 0x02 +#define VCOBANDSEL_3 0x04 +#define VCOBANDSEL_2 0x08 +#define VCOBANDSEL_1 0x10 + u8 vco_band; + +#define VCODIV4 4 +#define VCODIV2 2 + u8 vcodiv; + + u8 bs_delay:4; + u16 bs_freqcnt:13; + u16 bs_rdiv; + u8 prescaler_mode:1; + + u8 rfvga_bias_ctrl; + + s16 tuner_gain_thres; + u8 gain_level; + + u32 frequency; + + u8 refdiv; + + u8 Fwindow_enabled; +}; + +static int cx24113_writereg(struct cx24113_state *state, int reg, int data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->i2c_addr, + .flags = 0, .buf = buf, .len = 2 }; + int err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x," + " data == 0x%02x)\n", __func__, err, reg, data); + return err; + } + + return 0; +} + +static int cx24113_readreg(struct cx24113_state *state, u8 reg) +{ + int ret; + u8 b; + struct i2c_msg msg[] = { + { .addr = state->config->i2c_addr, + .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->config->i2c_addr, + .flags = I2C_M_RD, .buf = &b, .len = 1 } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + printk(KERN_DEBUG "%s: reg=0x%x (error=%d)\n", + __func__, reg, ret); + return ret; + } + + return b; +} + +static void cx24113_set_parameters(struct cx24113_state *state) +{ + u8 r; + + r = cx24113_readreg(state, 0x10) & 0x82; + r |= state->icp_mode; + r |= state->icp_man << 4; + r |= state->icp_dig << 2; + r |= state->prescaler_mode << 5; + cx24113_writereg(state, 0x10, r); + + r = (state->icp_auto_low << 0) | (state->icp_auto_mlow << 2) + | (state->icp_auto_mhi << 4) | (state->icp_auto_hi << 6); + cx24113_writereg(state, 0x11, r); + + if (state->rev == REV_CX24113) { + r = cx24113_readreg(state, 0x20) & 0xec; + r |= state->lna_gain; + r |= state->rfvga_bias_ctrl << 4; + cx24113_writereg(state, 0x20, r); + } + + r = cx24113_readreg(state, 0x12) & 0x03; + r |= state->acp_on << 2; + r |= state->bs_delay << 4; + cx24113_writereg(state, 0x12, r); + + r = cx24113_readreg(state, 0x18) & 0x40; + r |= state->vco_shift; + if (state->vco_band == VCOBANDSEL_6) + r |= (1 << 7); + else + r |= (state->vco_band << 1); + cx24113_writereg(state, 0x18, r); + + r = cx24113_readreg(state, 0x14) & 0x20; + r |= (state->vco_mode << 6) | ((state->bs_freqcnt >> 8) & 0x1f); + cx24113_writereg(state, 0x14, r); + cx24113_writereg(state, 0x15, (state->bs_freqcnt & 0xff)); + + cx24113_writereg(state, 0x16, (state->bs_rdiv >> 4) & 0xff); + r = (cx24113_readreg(state, 0x17) & 0x0f) | + ((state->bs_rdiv & 0x0f) << 4); + cx24113_writereg(state, 0x17, r); +} + +#define VGA_0 0x00 +#define VGA_1 0x04 +#define VGA_2 0x02 +#define VGA_3 0x06 +#define VGA_4 0x01 +#define VGA_5 0x05 +#define VGA_6 0x03 +#define VGA_7 0x07 + +#define RFVGA_0 0x00 +#define RFVGA_1 0x01 +#define RFVGA_2 0x02 +#define RFVGA_3 0x03 + +static int cx24113_set_gain_settings(struct cx24113_state *state, + s16 power_estimation) +{ + u8 ampout = cx24113_readreg(state, 0x1d) & 0xf0, + vga = cx24113_readreg(state, 0x1f) & 0x3f, + rfvga = cx24113_readreg(state, 0x20) & 0xf3; + u8 gain_level = power_estimation >= state->tuner_gain_thres; + + dprintk("power estimation: %d, thres: %d, gain_level: %d/%d\n", + power_estimation, state->tuner_gain_thres, + state->gain_level, gain_level); + + if (gain_level == state->gain_level) + return 0; /* nothing to be done */ + + ampout |= 0xf; + + if (gain_level) { + rfvga |= RFVGA_0 << 2; + vga |= (VGA_7 << 3) | VGA_7; + } else { + rfvga |= RFVGA_2 << 2; + vga |= (VGA_6 << 3) | VGA_2; + } + state->gain_level = gain_level; + + cx24113_writereg(state, 0x1d, ampout); + cx24113_writereg(state, 0x1f, vga); + cx24113_writereg(state, 0x20, rfvga); + + return 1; /* did something */ +} + +static int cx24113_set_Fref(struct cx24113_state *state, u8 high) +{ + u8 xtal = cx24113_readreg(state, 0x02); + if (state->rev == 0x43 && state->vcodiv == VCODIV4) + high = 1; + + xtal &= ~0x2; + if (high) + xtal |= high << 1; + return cx24113_writereg(state, 0x02, xtal); +} + +static int cx24113_enable(struct cx24113_state *state, u8 enable) +{ + u8 r21 = (cx24113_readreg(state, 0x21) & 0xc0) | enable; + if (state->rev == REV_CX24113) + r21 |= (1 << 1); + return cx24113_writereg(state, 0x21, r21); +} + +static int cx24113_set_bandwidth(struct cx24113_state *state, u32 bandwidth_khz) +{ + u8 r; + + if (bandwidth_khz <= 19000) + r = 0x03 << 6; + else if (bandwidth_khz <= 25000) + r = 0x02 << 6; + else + r = 0x01 << 6; + + dprintk("bandwidth to be set: %d\n", bandwidth_khz); + bandwidth_khz *= 10; + bandwidth_khz -= 10000; + bandwidth_khz /= 1000; + bandwidth_khz += 5; + bandwidth_khz /= 10; + + dprintk("bandwidth: %d %d\n", r >> 6, bandwidth_khz); + + r |= bandwidth_khz & 0x3f; + + return cx24113_writereg(state, 0x1e, r); +} + +static int cx24113_set_clk_inversion(struct cx24113_state *state, u8 on) +{ + u8 r = (cx24113_readreg(state, 0x10) & 0x7f) | ((on & 0x1) << 7); + return cx24113_writereg(state, 0x10, r); +} + +static int cx24113_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct cx24113_state *state = fe->tuner_priv; + u8 r = (cx24113_readreg(state, 0x10) & 0x02) >> 1; + if (r) + *status |= TUNER_STATUS_LOCKED; + dprintk("PLL locked: %d\n", r); + return 0; +} + +static u8 cx24113_set_ref_div(struct cx24113_state *state, u8 refdiv) +{ + if (state->rev == 0x43 && state->vcodiv == VCODIV4) + refdiv = 2; + return state->refdiv = refdiv; +} + +static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f) +{ + s32 N; + s64 F; + u64 dividend; + u8 R, r; + u8 vcodiv; + u8 factor; + s32 freq_hz = state->frequency * 1000; + + if (state->config->xtal_khz < 20000) + factor = 1; + else + factor = 2; + + if (state->rev == REV_CX24113) { + if (state->frequency >= 1100000) + vcodiv = VCODIV2; + else + vcodiv = VCODIV4; + } else { + if (state->frequency >= 1165000) + vcodiv = VCODIV2; + else + vcodiv = VCODIV4; + } + state->vcodiv = vcodiv; + + dprintk("calculating N/F for %dHz with vcodiv %d\n", freq_hz, vcodiv); + R = 0; + do { + R = cx24113_set_ref_div(state, R + 1); + + /* calculate tuner PLL settings: */ + N = (freq_hz / 100 * vcodiv) * R; + N /= (state->config->xtal_khz) * factor * 2; + N += 5; /* For round up. */ + N /= 10; + N -= 32; + } while (N < 6 && R < 3); + + if (N < 6) { + cx_err("strange frequency: N < 6\n"); + return; + } + F = freq_hz; + F *= (u64) (R * vcodiv * 262144); + dprintk("1 N: %d, F: %lld, R: %d\n", N, (long long)F, R); + /* do_div needs an u64 as first argument */ + dividend = F; + do_div(dividend, state->config->xtal_khz * 1000 * factor * 2); + F = dividend; + dprintk("2 N: %d, F: %lld, R: %d\n", N, (long long)F, R); + F -= (N + 32) * 262144; + + dprintk("3 N: %d, F: %lld, R: %d\n", N, (long long)F, R); + + if (state->Fwindow_enabled) { + if (F > (262144 / 2 - 1638)) + F = 262144 / 2 - 1638; + if (F < (-262144 / 2 + 1638)) + F = -262144 / 2 + 1638; + if ((F < 3277 && F > 0) || (F > -3277 && F < 0)) { + F = 0; + r = cx24113_readreg(state, 0x10); + cx24113_writereg(state, 0x10, r | (1 << 6)); + } + } + dprintk("4 N: %d, F: %lld, R: %d\n", N, (long long)F, R); + + *n = (u16) N; + *f = (s32) F; +} + + +static void cx24113_set_nfr(struct cx24113_state *state, u16 n, s32 f, u8 r) +{ + u8 reg; + cx24113_writereg(state, 0x19, (n >> 1) & 0xff); + + reg = ((n & 0x1) << 7) | ((f >> 11) & 0x7f); + cx24113_writereg(state, 0x1a, reg); + + cx24113_writereg(state, 0x1b, (f >> 3) & 0xff); + + reg = cx24113_readreg(state, 0x1c) & 0x1f; + cx24113_writereg(state, 0x1c, reg | ((f & 0x7) << 5)); + + cx24113_set_Fref(state, r - 1); +} + +static int cx24113_set_frequency(struct cx24113_state *state, u32 frequency) +{ + u8 r = 1; /* or 2 */ + u16 n = 6; + s32 f = 0; + + r = cx24113_readreg(state, 0x14); + cx24113_writereg(state, 0x14, r & 0x3f); + + r = cx24113_readreg(state, 0x10); + cx24113_writereg(state, 0x10, r & 0xbf); + + state->frequency = frequency; + + dprintk("tuning to frequency: %d\n", frequency); + + cx24113_calc_pll_nf(state, &n, &f); + cx24113_set_nfr(state, n, f, state->refdiv); + + r = cx24113_readreg(state, 0x18) & 0xbf; + if (state->vcodiv != VCODIV2) + r |= 1 << 6; + cx24113_writereg(state, 0x18, r); + + /* The need for this sleep is not clear. But helps in some cases */ + msleep(5); + + r = cx24113_readreg(state, 0x1c) & 0xef; + cx24113_writereg(state, 0x1c, r | (1 << 4)); + return 0; +} + +static int cx24113_init(struct dvb_frontend *fe) +{ + struct cx24113_state *state = fe->tuner_priv; + int ret; + + state->tuner_gain_thres = -50; + state->gain_level = 255; /* to force a gain-setting initialization */ + state->icp_mode = 0; + + if (state->config->xtal_khz < 11000) { + state->icp_auto_hi = ICP_LEVEL4; + state->icp_auto_mhi = ICP_LEVEL4; + state->icp_auto_mlow = ICP_LEVEL3; + state->icp_auto_low = ICP_LEVEL3; + } else { + state->icp_auto_hi = ICP_LEVEL4; + state->icp_auto_mhi = ICP_LEVEL4; + state->icp_auto_mlow = ICP_LEVEL3; + state->icp_auto_low = ICP_LEVEL2; + } + + state->icp_dig = ICP_LEVEL3; + state->icp_man = ICP_LEVEL1; + state->acp_on = 1; + state->vco_mode = 0; + state->vco_shift = 0; + state->vco_band = VCOBANDSEL_1; + state->bs_delay = 8; + state->bs_freqcnt = 0x0fff; + state->bs_rdiv = 0x0fff; + state->prescaler_mode = 0; + state->lna_gain = LNA_MAX_GAIN; + state->rfvga_bias_ctrl = 1; + state->Fwindow_enabled = 1; + + cx24113_set_Fref(state, 0); + cx24113_enable(state, 0x3d); + cx24113_set_parameters(state); + + cx24113_set_gain_settings(state, -30); + + cx24113_set_bandwidth(state, 18025); + cx24113_set_clk_inversion(state, 1); + + if (state->config->xtal_khz >= 40000) + ret = cx24113_writereg(state, 0x02, + (cx24113_readreg(state, 0x02) & 0xfb) | (1 << 2)); + else + ret = cx24113_writereg(state, 0x02, + (cx24113_readreg(state, 0x02) & 0xfb) | (0 << 2)); + + return ret; +} + +static int cx24113_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct cx24113_state *state = fe->tuner_priv; + /* for a ROLL-OFF factor of 0.35, 0.2: 600, 0.25: 625 */ + u32 roll_off = 675; + u32 bw; + + bw = ((c->symbol_rate/100) * roll_off) / 1000; + bw += (10000000/100) + 5; + bw /= 10; + bw += 1000; + cx24113_set_bandwidth(state, bw); + + cx24113_set_frequency(state, c->frequency); + msleep(5); + return cx24113_get_status(fe, &bw); +} + +static s8 cx24113_agc_table[2][10] = { + {-54, -41, -35, -30, -25, -21, -16, -10, -6, -2}, + {-39, -35, -30, -25, -19, -15, -11, -5, 1, 9}, +}; + +void cx24113_agc_callback(struct dvb_frontend *fe) +{ + struct cx24113_state *state = fe->tuner_priv; + s16 s, i; + if (!fe->ops.read_signal_strength) + return; + + do { + /* this only works with the current CX24123 implementation */ + fe->ops.read_signal_strength(fe, (u16 *) &s); + s >>= 8; + dprintk("signal strength: %d\n", s); + for (i = 0; i < sizeof(cx24113_agc_table[0]); i++) + if (cx24113_agc_table[state->gain_level][i] > s) + break; + s = -25 - i*5; + } while (cx24113_set_gain_settings(state, s)); +} +EXPORT_SYMBOL(cx24113_agc_callback); + +static int cx24113_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct cx24113_state *state = fe->tuner_priv; + *frequency = state->frequency; + return 0; +} + +static int cx24113_release(struct dvb_frontend *fe) +{ + struct cx24113_state *state = fe->tuner_priv; + dprintk("\n"); + fe->tuner_priv = NULL; + kfree(state); + return 0; +} + +static const struct dvb_tuner_ops cx24113_tuner_ops = { + .info = { + .name = "Conexant CX24113", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_step = 125, + }, + + .release = cx24113_release, + + .init = cx24113_init, + + .set_params = cx24113_set_params, + .get_frequency = cx24113_get_frequency, + .get_status = cx24113_get_status, +}; + +struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, + const struct cx24113_config *config, struct i2c_adapter *i2c) +{ + /* allocate memory for the internal state */ + struct cx24113_state *state = + kzalloc(sizeof(struct cx24113_state), GFP_KERNEL); + int rc; + if (state == NULL) { + cx_err("Unable to kzalloc\n"); + goto error; + } + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + cx_info("trying to detect myself\n"); + + /* making a dummy read, because of some expected troubles + * after power on */ + cx24113_readreg(state, 0x00); + + rc = cx24113_readreg(state, 0x00); + if (rc < 0) { + cx_info("CX24113 not found.\n"); + goto error; + } + state->rev = rc; + + switch (rc) { + case 0x43: + cx_info("detected CX24113 variant\n"); + break; + case REV_CX24113: + cx_info("successfully detected\n"); + break; + default: + cx_err("unsupported device id: %x\n", state->rev); + goto error; + } + state->ver = cx24113_readreg(state, 0x01); + cx_info("version: %x\n", state->ver); + + /* create dvb_frontend */ + memcpy(&fe->ops.tuner_ops, &cx24113_tuner_ops, + sizeof(struct dvb_tuner_ops)); + fe->tuner_priv = state; + return fe; + +error: + kfree(state); + + return NULL; +} +EXPORT_SYMBOL(cx24113_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("DVB Frontend module for Conexant CX24113/CX24128hardware"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/media/dvb-frontends/cx24113.h b/drivers/media/dvb-frontends/cx24113.h new file mode 100644 index 00000000..782711ba --- /dev/null +++ b/drivers/media/dvb-frontends/cx24113.h @@ -0,0 +1,54 @@ +/* + * Driver for Conexant CX24113/CX24128 Tuner (Satellite) + * + * Copyright (C) 2007-8 Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CX24113_H +#define CX24113_H + +#include + +struct dvb_frontend; + +struct cx24113_config { + u8 i2c_addr; /* 0x14 or 0x54 */ + + u32 xtal_khz; +}; + +#if IS_ENABLED(CONFIG_DVB_TUNER_CX24113) +extern struct dvb_frontend *cx24113_attach(struct dvb_frontend *, + const struct cx24113_config *config, struct i2c_adapter *i2c); + +extern void cx24113_agc_callback(struct dvb_frontend *fe); +#else +static inline struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, + const struct cx24113_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline void cx24113_agc_callback(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} +#endif + +#endif /* CX24113_H */ diff --git a/drivers/media/dvb-frontends/cx24116.c b/drivers/media/dvb-frontends/cx24116.c new file mode 100644 index 00000000..2916d7c7 --- /dev/null +++ b/drivers/media/dvb-frontends/cx24116.c @@ -0,0 +1,1508 @@ +/* + Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver + + Copyright (C) 2006-2008 Steven Toth + Copyright (C) 2006-2007 Georg Acher + Copyright (C) 2007-2008 Darron Broad + March 2007 + Fixed some bugs. + Added diseqc support. + Added corrected signal strength support. + August 2007 + Sync with legacy version. + Some clean ups. + Copyright (C) 2008 Igor Liplianin + September, 9th 2008 + Fixed locking on high symbol rates (>30000). + Implement MPEG initialization parameter. + January, 17th 2009 + Fill set_voltage with actually control voltage code. + Correct set tone to not affect voltage. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "cx24116.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_INFO "cx24116: " args); \ + } while (0) + +#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw" +#define CX24116_SEARCH_RANGE_KHZ 5000 + +/* known registers */ +#define CX24116_REG_COMMAND (0x00) /* command args 0x00..0x1e */ +#define CX24116_REG_EXECUTE (0x1f) /* execute command */ +#define CX24116_REG_MAILBOX (0x96) /* FW or multipurpose mailbox? */ +#define CX24116_REG_RESET (0x20) /* reset status > 0 */ +#define CX24116_REG_SIGNAL (0x9e) /* signal low */ +#define CX24116_REG_SSTATUS (0x9d) /* signal high / status */ +#define CX24116_REG_QUALITY8 (0xa3) +#define CX24116_REG_QSTATUS (0xbc) +#define CX24116_REG_QUALITY0 (0xd5) +#define CX24116_REG_BER0 (0xc9) +#define CX24116_REG_BER8 (0xc8) +#define CX24116_REG_BER16 (0xc7) +#define CX24116_REG_BER24 (0xc6) +#define CX24116_REG_UCB0 (0xcb) +#define CX24116_REG_UCB8 (0xca) +#define CX24116_REG_CLKDIV (0xf3) +#define CX24116_REG_RATEDIV (0xf9) + +/* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */ +#define CX24116_REG_FECSTATUS (0x9c) + +/* FECSTATUS bits */ +/* mask to determine configured fec (not tuned) or actual fec (tuned) */ +#define CX24116_FEC_FECMASK (0x1f) + +/* Select DVB-S demodulator, else DVB-S2 */ +#define CX24116_FEC_DVBS (0x20) +#define CX24116_FEC_UNKNOWN (0x40) /* Unknown/unused */ + +/* Pilot mode requested when tuning else always reset when tuned */ +#define CX24116_FEC_PILOT (0x80) + +/* arg buffer size */ +#define CX24116_ARGLEN (0x1e) + +/* rolloff */ +#define CX24116_ROLLOFF_020 (0x00) +#define CX24116_ROLLOFF_025 (0x01) +#define CX24116_ROLLOFF_035 (0x02) + +/* pilot bit */ +#define CX24116_PILOT_OFF (0x00) +#define CX24116_PILOT_ON (0x40) + +/* signal status */ +#define CX24116_HAS_SIGNAL (0x01) +#define CX24116_HAS_CARRIER (0x02) +#define CX24116_HAS_VITERBI (0x04) +#define CX24116_HAS_SYNCLOCK (0x08) +#define CX24116_HAS_UNKNOWN1 (0x10) +#define CX24116_HAS_UNKNOWN2 (0x20) +#define CX24116_STATUS_MASK (0x0f) +#define CX24116_SIGNAL_MASK (0xc0) + +#define CX24116_DISEQC_TONEOFF (0) /* toneburst never sent */ +#define CX24116_DISEQC_TONECACHE (1) /* toneburst cached */ +#define CX24116_DISEQC_MESGCACHE (2) /* message cached */ + +/* arg offset for DiSEqC */ +#define CX24116_DISEQC_BURST (1) +#define CX24116_DISEQC_ARG2_2 (2) /* unknown value=2 */ +#define CX24116_DISEQC_ARG3_0 (3) /* unknown value=0 */ +#define CX24116_DISEQC_ARG4_0 (4) /* unknown value=0 */ +#define CX24116_DISEQC_MSGLEN (5) +#define CX24116_DISEQC_MSGOFS (6) + +/* DiSEqC burst */ +#define CX24116_DISEQC_MINI_A (0) +#define CX24116_DISEQC_MINI_B (1) + +/* DiSEqC tone burst */ +static int toneburst = 1; +module_param(toneburst, int, 0644); +MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, "\ + "2=MESSAGE CACHE (default:1)"); + +/* SNR measurements */ +static int esno_snr; +module_param(esno_snr, int, 0644); +MODULE_PARM_DESC(esno_snr, "SNR return units, 0=PERCENTAGE 0-100, "\ + "1=ESNO(db * 10) (default:0)"); + +enum cmds { + CMD_SET_VCO = 0x10, + CMD_TUNEREQUEST = 0x11, + CMD_MPEGCONFIG = 0x13, + CMD_TUNERINIT = 0x14, + CMD_BANDWIDTH = 0x15, + CMD_GETAGC = 0x19, + CMD_LNBCONFIG = 0x20, + CMD_LNBSEND = 0x21, /* Formerly CMD_SEND_DISEQC */ + CMD_LNBDCLEVEL = 0x22, + CMD_SET_TONE = 0x23, + CMD_UPDFWVERS = 0x35, + CMD_TUNERSLEEP = 0x36, + CMD_AGCCONTROL = 0x3b, /* Unknown */ +}; + +/* The Demod/Tuner can't easily provide these, we cache them */ +struct cx24116_tuning { + u32 frequency; + u32 symbol_rate; + fe_spectral_inversion_t inversion; + fe_code_rate_t fec; + + fe_delivery_system_t delsys; + fe_modulation_t modulation; + fe_pilot_t pilot; + fe_rolloff_t rolloff; + + /* Demod values */ + u8 fec_val; + u8 fec_mask; + u8 inversion_val; + u8 pilot_val; + u8 rolloff_val; +}; + +/* Basic commands that are sent to the firmware */ +struct cx24116_cmd { + u8 len; + u8 args[CX24116_ARGLEN]; +}; + +struct cx24116_state { + struct i2c_adapter *i2c; + const struct cx24116_config *config; + + struct dvb_frontend frontend; + + struct cx24116_tuning dcur; + struct cx24116_tuning dnxt; + + u8 skip_fw_load; + u8 burst; + struct cx24116_cmd dsec_cmd; +}; + +static int cx24116_writereg(struct cx24116_state *state, int reg, int data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = 0, .buf = buf, .len = 2 }; + int err; + + if (debug > 1) + printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n", + __func__, reg, data); + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x," + " value == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +/* Bulk byte writes to a single I2C address, for 32k firmware load */ +static int cx24116_writeregN(struct cx24116_state *state, int reg, + const u8 *data, u16 len) +{ + int ret = -EREMOTEIO; + struct i2c_msg msg; + u8 *buf; + + buf = kmalloc(len + 1, GFP_KERNEL); + if (buf == NULL) { + printk("Unable to kmalloc\n"); + ret = -ENOMEM; + goto error; + } + + *(buf) = reg; + memcpy(buf + 1, data, len); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.buf = buf; + msg.len = len + 1; + + if (debug > 1) + printk(KERN_INFO "cx24116: %s: write regN 0x%02x, len = %d\n", + __func__, reg, len); + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) { + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n", + __func__, ret, reg); + ret = -EREMOTEIO; + } + +error: + kfree(buf); + + return ret; +} + +static int cx24116_readreg(struct cx24116_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 1 } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + printk(KERN_ERR "%s: reg=0x%x (error=%d)\n", + __func__, reg, ret); + return ret; + } + + if (debug > 1) + printk(KERN_INFO "cx24116: read reg 0x%02x, value 0x%02x\n", + reg, b1[0]); + + return b1[0]; +} + +static int cx24116_set_inversion(struct cx24116_state *state, + fe_spectral_inversion_t inversion) +{ + dprintk("%s(%d)\n", __func__, inversion); + + switch (inversion) { + case INVERSION_OFF: + state->dnxt.inversion_val = 0x00; + break; + case INVERSION_ON: + state->dnxt.inversion_val = 0x04; + break; + case INVERSION_AUTO: + state->dnxt.inversion_val = 0x0C; + break; + default: + return -EINVAL; + } + + state->dnxt.inversion = inversion; + + return 0; +} + +/* + * modfec (modulation and FEC) + * =========================== + * + * MOD FEC mask/val standard + * ---- -------- ----------- -------- + * QPSK FEC_1_2 0x02 0x02+X DVB-S + * QPSK FEC_2_3 0x04 0x02+X DVB-S + * QPSK FEC_3_4 0x08 0x02+X DVB-S + * QPSK FEC_4_5 0x10 0x02+X DVB-S (?) + * QPSK FEC_5_6 0x20 0x02+X DVB-S + * QPSK FEC_6_7 0x40 0x02+X DVB-S + * QPSK FEC_7_8 0x80 0x02+X DVB-S + * QPSK FEC_8_9 0x01 0x02+X DVB-S (?) (NOT SUPPORTED?) + * QPSK AUTO 0xff 0x02+X DVB-S + * + * For DVB-S high byte probably represents FEC + * and low byte selects the modulator. The high + * byte is search range mask. Bit 5 may turn + * on DVB-S and remaining bits represent some + * kind of calibration (how/what i do not know). + * + * Eg.(2/3) szap "Zone Horror" + * + * mask/val = 0x04, 0x20 + * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 0 | FE_HAS_LOCK + * + * mask/val = 0x04, 0x30 + * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 0 | FE_HAS_LOCK + * + * After tuning FECSTATUS contains actual FEC + * in use numbered 1 through to 8 for 1/2 .. 2/3 etc + * + * NBC=NOT/NON BACKWARD COMPATIBLE WITH DVB-S (DVB-S2 only) + * + * NBC-QPSK FEC_1_2 0x00, 0x04 DVB-S2 + * NBC-QPSK FEC_3_5 0x00, 0x05 DVB-S2 + * NBC-QPSK FEC_2_3 0x00, 0x06 DVB-S2 + * NBC-QPSK FEC_3_4 0x00, 0x07 DVB-S2 + * NBC-QPSK FEC_4_5 0x00, 0x08 DVB-S2 + * NBC-QPSK FEC_5_6 0x00, 0x09 DVB-S2 + * NBC-QPSK FEC_8_9 0x00, 0x0a DVB-S2 + * NBC-QPSK FEC_9_10 0x00, 0x0b DVB-S2 + * + * NBC-8PSK FEC_3_5 0x00, 0x0c DVB-S2 + * NBC-8PSK FEC_2_3 0x00, 0x0d DVB-S2 + * NBC-8PSK FEC_3_4 0x00, 0x0e DVB-S2 + * NBC-8PSK FEC_5_6 0x00, 0x0f DVB-S2 + * NBC-8PSK FEC_8_9 0x00, 0x10 DVB-S2 + * NBC-8PSK FEC_9_10 0x00, 0x11 DVB-S2 + * + * For DVB-S2 low bytes selects both modulator + * and FEC. High byte is meaningless here. To + * set pilot, bit 6 (0x40) is set. When inspecting + * FECSTATUS bit 7 (0x80) represents the pilot + * selection whilst not tuned. When tuned, actual FEC + * in use is found in FECSTATUS as per above. Pilot + * value is reset. + */ + +/* A table of modulation, fec and configuration bytes for the demod. + * Not all S2 mmodulation schemes are support and not all rates with + * a scheme are support. Especially, no auto detect when in S2 mode. + */ +static struct cx24116_modfec { + fe_delivery_system_t delivery_system; + fe_modulation_t modulation; + fe_code_rate_t fec; + u8 mask; /* In DVBS mode this is used to autodetect */ + u8 val; /* Passed to the firmware to indicate mode selection */ +} CX24116_MODFEC_MODES[] = { + /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */ + + /*mod fec mask val */ + { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 }, + { SYS_DVBS, QPSK, FEC_1_2, 0x02, 0x2e }, /* 00000010 00101110 */ + { SYS_DVBS, QPSK, FEC_2_3, 0x04, 0x2f }, /* 00000100 00101111 */ + { SYS_DVBS, QPSK, FEC_3_4, 0x08, 0x30 }, /* 00001000 00110000 */ + { SYS_DVBS, QPSK, FEC_4_5, 0xfe, 0x30 }, /* 000?0000 ? */ + { SYS_DVBS, QPSK, FEC_5_6, 0x20, 0x31 }, /* 00100000 00110001 */ + { SYS_DVBS, QPSK, FEC_6_7, 0xfe, 0x30 }, /* 0?000000 ? */ + { SYS_DVBS, QPSK, FEC_7_8, 0x80, 0x32 }, /* 10000000 00110010 */ + { SYS_DVBS, QPSK, FEC_8_9, 0xfe, 0x30 }, /* 0000000? ? */ + { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 }, + /* NBC-QPSK */ + { SYS_DVBS2, QPSK, FEC_1_2, 0x00, 0x04 }, + { SYS_DVBS2, QPSK, FEC_3_5, 0x00, 0x05 }, + { SYS_DVBS2, QPSK, FEC_2_3, 0x00, 0x06 }, + { SYS_DVBS2, QPSK, FEC_3_4, 0x00, 0x07 }, + { SYS_DVBS2, QPSK, FEC_4_5, 0x00, 0x08 }, + { SYS_DVBS2, QPSK, FEC_5_6, 0x00, 0x09 }, + { SYS_DVBS2, QPSK, FEC_8_9, 0x00, 0x0a }, + { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b }, + /* 8PSK */ + { SYS_DVBS2, PSK_8, FEC_3_5, 0x00, 0x0c }, + { SYS_DVBS2, PSK_8, FEC_2_3, 0x00, 0x0d }, + { SYS_DVBS2, PSK_8, FEC_3_4, 0x00, 0x0e }, + { SYS_DVBS2, PSK_8, FEC_5_6, 0x00, 0x0f }, + { SYS_DVBS2, PSK_8, FEC_8_9, 0x00, 0x10 }, + { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 }, + /* + * `val' can be found in the FECSTATUS register when tuning. + * FECSTATUS will give the actual FEC in use if tuning was successful. + */ +}; + +static int cx24116_lookup_fecmod(struct cx24116_state *state, + fe_delivery_system_t d, fe_modulation_t m, fe_code_rate_t f) +{ + int i, ret = -EOPNOTSUPP; + + dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f); + + for (i = 0; i < ARRAY_SIZE(CX24116_MODFEC_MODES); i++) { + if ((d == CX24116_MODFEC_MODES[i].delivery_system) && + (m == CX24116_MODFEC_MODES[i].modulation) && + (f == CX24116_MODFEC_MODES[i].fec)) { + ret = i; + break; + } + } + + return ret; +} + +static int cx24116_set_fec(struct cx24116_state *state, + fe_delivery_system_t delsys, fe_modulation_t mod, fe_code_rate_t fec) +{ + int ret = 0; + + dprintk("%s(0x%02x,0x%02x)\n", __func__, mod, fec); + + ret = cx24116_lookup_fecmod(state, delsys, mod, fec); + + if (ret < 0) + return ret; + + state->dnxt.fec = fec; + state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val; + state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask; + dprintk("%s() mask/val = 0x%02x/0x%02x\n", __func__, + state->dnxt.fec_mask, state->dnxt.fec_val); + + return 0; +} + +static int cx24116_set_symbolrate(struct cx24116_state *state, u32 rate) +{ + dprintk("%s(%d)\n", __func__, rate); + + /* check if symbol rate is within limits */ + if ((rate > state->frontend.ops.info.symbol_rate_max) || + (rate < state->frontend.ops.info.symbol_rate_min)) { + dprintk("%s() unsupported symbol_rate = %d\n", __func__, rate); + return -EOPNOTSUPP; + } + + state->dnxt.symbol_rate = rate; + dprintk("%s() symbol_rate = %d\n", __func__, rate); + + return 0; +} + +static int cx24116_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw); + +static int cx24116_firmware_ondemand(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + const struct firmware *fw; + int ret = 0; + + dprintk("%s()\n", __func__); + + if (cx24116_readreg(state, 0x20) > 0) { + + if (state->skip_fw_load) + return 0; + + /* Load firmware */ + /* request the firmware, this will block until loaded */ + printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", + __func__, CX24116_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, + state->i2c->dev.parent); + printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", + __func__); + if (ret) { + printk(KERN_ERR "%s: No firmware uploaded " + "(timeout or file not found?)\n", __func__); + return ret; + } + + /* Make sure we don't recurse back through here + * during loading */ + state->skip_fw_load = 1; + + ret = cx24116_load_firmware(fe, fw); + if (ret) + printk(KERN_ERR "%s: Writing firmware to device failed\n", + __func__); + + release_firmware(fw); + + printk(KERN_INFO "%s: Firmware upload %s\n", __func__, + ret == 0 ? "complete" : "failed"); + + /* Ensure firmware is always loaded if required */ + state->skip_fw_load = 0; + } + + return ret; +} + +/* Take a basic firmware command structure, format it + * and forward it for processing + */ +static int cx24116_cmd_execute(struct dvb_frontend *fe, struct cx24116_cmd *cmd) +{ + struct cx24116_state *state = fe->demodulator_priv; + int i, ret; + + dprintk("%s()\n", __func__); + + /* Load the firmware if required */ + ret = cx24116_firmware_ondemand(fe); + if (ret != 0) { + printk(KERN_ERR "%s(): Unable initialise the firmware\n", + __func__); + return ret; + } + + /* Write the command */ + for (i = 0; i < cmd->len ; i++) { + dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]); + cx24116_writereg(state, i, cmd->args[i]); + } + + /* Start execution and wait for cmd to terminate */ + cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01); + while (cx24116_readreg(state, CX24116_REG_EXECUTE)) { + msleep(10); + if (i++ > 64) { + /* Avoid looping forever if the firmware does + not respond */ + printk(KERN_WARNING "%s() Firmware not responding\n", + __func__); + return -EREMOTEIO; + } + } + return 0; +} + +static int cx24116_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int i, ret, len, max, remaining; + unsigned char vers[4]; + + dprintk("%s\n", __func__); + dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n", + fw->size, + fw->data[0], + fw->data[1], + fw->data[fw->size-2], + fw->data[fw->size-1]); + + /* Toggle 88x SRST pin to reset demod */ + if (state->config->reset_device) + state->config->reset_device(fe); + + /* Begin the firmware load process */ + /* Prepare the demod, load the firmware, cleanup after load */ + + /* Init PLL */ + cx24116_writereg(state, 0xE5, 0x00); + cx24116_writereg(state, 0xF1, 0x08); + cx24116_writereg(state, 0xF2, 0x13); + + /* Start PLL */ + cx24116_writereg(state, 0xe0, 0x03); + cx24116_writereg(state, 0xe0, 0x00); + + /* Unknown */ + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); + + /* Unknown */ + cx24116_writereg(state, 0xF0, 0x03); + cx24116_writereg(state, 0xF4, 0x81); + cx24116_writereg(state, 0xF5, 0x00); + cx24116_writereg(state, 0xF6, 0x00); + + /* Split firmware to the max I2C write len and write. + * Writes whole firmware as one write when i2c_wr_max is set to 0. */ + if (state->config->i2c_wr_max) + max = state->config->i2c_wr_max; + else + max = INT_MAX; /* enough for 32k firmware */ + + for (remaining = fw->size; remaining > 0; remaining -= max - 1) { + len = remaining; + if (len > max - 1) + len = max - 1; + + cx24116_writeregN(state, 0xF7, &fw->data[fw->size - remaining], + len); + } + + cx24116_writereg(state, 0xF4, 0x10); + cx24116_writereg(state, 0xF0, 0x00); + cx24116_writereg(state, 0xF8, 0x06); + + /* Firmware CMD 10: VCO config */ + cmd.args[0x00] = CMD_SET_VCO; + cmd.args[0x01] = 0x05; + cmd.args[0x02] = 0xdc; + cmd.args[0x03] = 0xda; + cmd.args[0x04] = 0xae; + cmd.args[0x05] = 0xaa; + cmd.args[0x06] = 0x04; + cmd.args[0x07] = 0x9d; + cmd.args[0x08] = 0xfc; + cmd.args[0x09] = 0x06; + cmd.len = 0x0a; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + cx24116_writereg(state, CX24116_REG_SSTATUS, 0x00); + + /* Firmware CMD 14: Tuner config */ + cmd.args[0x00] = CMD_TUNERINIT; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x00; + cmd.len = 0x03; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + cx24116_writereg(state, 0xe5, 0x00); + + /* Firmware CMD 13: MPEG config */ + cmd.args[0x00] = CMD_MPEGCONFIG; + cmd.args[0x01] = 0x01; + cmd.args[0x02] = 0x75; + cmd.args[0x03] = 0x00; + if (state->config->mpg_clk_pos_pol) + cmd.args[0x04] = state->config->mpg_clk_pos_pol; + else + cmd.args[0x04] = 0x02; + cmd.args[0x05] = 0x00; + cmd.len = 0x06; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Firmware CMD 35: Get firmware version */ + cmd.args[0x00] = CMD_UPDFWVERS; + cmd.len = 0x02; + for (i = 0; i < 4; i++) { + cmd.args[0x01] = i; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + vers[i] = cx24116_readreg(state, CX24116_REG_MAILBOX); + } + printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__, + vers[0], vers[1], vers[2], vers[3]); + + return 0; +} + +static int cx24116_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct cx24116_state *state = fe->demodulator_priv; + + int lock = cx24116_readreg(state, CX24116_REG_SSTATUS) & + CX24116_STATUS_MASK; + + dprintk("%s: status = 0x%02x\n", __func__, lock); + + *status = 0; + + if (lock & CX24116_HAS_SIGNAL) + *status |= FE_HAS_SIGNAL; + if (lock & CX24116_HAS_CARRIER) + *status |= FE_HAS_CARRIER; + if (lock & CX24116_HAS_VITERBI) + *status |= FE_HAS_VITERBI; + if (lock & CX24116_HAS_SYNCLOCK) + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + + return 0; +} + +static int cx24116_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct cx24116_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + *ber = (cx24116_readreg(state, CX24116_REG_BER24) << 24) | + (cx24116_readreg(state, CX24116_REG_BER16) << 16) | + (cx24116_readreg(state, CX24116_REG_BER8) << 8) | + cx24116_readreg(state, CX24116_REG_BER0); + + return 0; +} + +/* TODO Determine function and scale appropriately */ +static int cx24116_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + u16 sig_reading; + + dprintk("%s()\n", __func__); + + /* Firmware CMD 19: Get AGC */ + cmd.args[0x00] = CMD_GETAGC; + cmd.len = 0x01; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + sig_reading = + (cx24116_readreg(state, + CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK) | + (cx24116_readreg(state, CX24116_REG_SIGNAL) << 6); + *signal_strength = 0 - sig_reading; + + dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", + __func__, sig_reading, *signal_strength); + + return 0; +} + +/* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ +static int cx24116_read_snr_pct(struct dvb_frontend *fe, u16 *snr) +{ + struct cx24116_state *state = fe->demodulator_priv; + u8 snr_reading; + static const u32 snr_tab[] = { /* 10 x Table (rounded up) */ + 0x00000, 0x0199A, 0x03333, 0x04ccD, 0x06667, + 0x08000, 0x0999A, 0x0b333, 0x0cccD, 0x0e667, + 0x10000, 0x1199A, 0x13333, 0x14ccD, 0x16667, + 0x18000 }; + + dprintk("%s()\n", __func__); + + snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0); + + if (snr_reading >= 0xa0 /* 100% */) + *snr = 0xffff; + else + *snr = snr_tab[(snr_reading & 0xf0) >> 4] + + (snr_tab[(snr_reading & 0x0f)] >> 4); + + dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, + snr_reading, *snr); + + return 0; +} + +/* The reelbox patches show the value in the registers represents + * ESNO, from 0->30db (values 0->300). We provide this value by + * default. + */ +static int cx24116_read_snr_esno(struct dvb_frontend *fe, u16 *snr) +{ + struct cx24116_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + *snr = cx24116_readreg(state, CX24116_REG_QUALITY8) << 8 | + cx24116_readreg(state, CX24116_REG_QUALITY0); + + dprintk("%s: raw 0x%04x\n", __func__, *snr); + + return 0; +} + +static int cx24116_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + if (esno_snr == 1) + return cx24116_read_snr_esno(fe, snr); + else + return cx24116_read_snr_pct(fe, snr); +} + +static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct cx24116_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + *ucblocks = (cx24116_readreg(state, CX24116_REG_UCB8) << 8) | + cx24116_readreg(state, CX24116_REG_UCB0); + + return 0; +} + +/* Overwrite the current tuning params, we are about to tune */ +static void cx24116_clone_params(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + state->dcur = state->dnxt; +} + +/* Wait for LNB */ +static int cx24116_wait_for_lnb(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + int i; + + dprintk("%s() qstatus = 0x%02x\n", __func__, + cx24116_readreg(state, CX24116_REG_QSTATUS)); + + /* Wait for up to 300 ms */ + for (i = 0; i < 30 ; i++) { + if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20) + return 0; + msleep(10); + } + + dprintk("%s(): LNB not ready\n", __func__); + + return -ETIMEDOUT; /* -EBUSY ? */ +} + +static int cx24116_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx24116_cmd cmd; + int ret; + + dprintk("%s: %s\n", __func__, + voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if (ret != 0) + return ret; + + /* Wait for voltage/min repeat delay */ + msleep(100); + + cmd.args[0x00] = CMD_LNBDCLEVEL; + cmd.args[0x01] = (voltage == SEC_VOLTAGE_18 ? 0x01 : 0x00); + cmd.len = 0x02; + + /* Min delay time before DiSEqC send */ + msleep(15); + + return cx24116_cmd_execute(fe, &cmd); +} + +static int cx24116_set_tone(struct dvb_frontend *fe, + fe_sec_tone_mode_t tone) +{ + struct cx24116_cmd cmd; + int ret; + + dprintk("%s(%d)\n", __func__, tone); + if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { + printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone); + return -EINVAL; + } + + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if (ret != 0) + return ret; + + /* Min delay time after DiSEqC send */ + msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ + + /* Now we set the tone */ + cmd.args[0x00] = CMD_SET_TONE; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x00; + + switch (tone) { + case SEC_TONE_ON: + dprintk("%s: setting tone on\n", __func__); + cmd.args[0x03] = 0x01; + break; + case SEC_TONE_OFF: + dprintk("%s: setting tone off\n", __func__); + cmd.args[0x03] = 0x00; + break; + } + cmd.len = 0x04; + + /* Min delay time before DiSEqC send */ + msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ + + return cx24116_cmd_execute(fe, &cmd); +} + +/* Initialise DiSEqC */ +static int cx24116_diseqc_init(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + /* Firmware CMD 20: LNB/DiSEqC config */ + cmd.args[0x00] = CMD_LNBCONFIG; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x10; + cmd.args[0x03] = 0x00; + cmd.args[0x04] = 0x8f; + cmd.args[0x05] = 0x28; + cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01; + cmd.args[0x07] = 0x01; + cmd.len = 0x08; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Prepare a DiSEqC command */ + state->dsec_cmd.args[0x00] = CMD_LNBSEND; + + /* DiSEqC burst */ + state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; + + /* Unknown */ + state->dsec_cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; + state->dsec_cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; + /* Continuation flag? */ + state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; + + /* DiSEqC message length */ + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00; + + /* Command length */ + state->dsec_cmd.len = CX24116_DISEQC_MSGOFS; + + return 0; +} + +/* Send DiSEqC message with derived burst (hack) || previous burst */ +static int cx24116_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *d) +{ + struct cx24116_state *state = fe->demodulator_priv; + int i, ret; + + /* Dump DiSEqC message */ + if (debug) { + printk(KERN_INFO "cx24116: %s(", __func__); + for (i = 0 ; i < d->msg_len ;) { + printk(KERN_INFO "0x%02x", d->msg[i]); + if (++i < d->msg_len) + printk(KERN_INFO ", "); + } + printk(") toneburst=%d\n", toneburst); + } + + /* Validate length */ + if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) + return -EINVAL; + + /* DiSEqC message */ + for (i = 0; i < d->msg_len; i++) + state->dsec_cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i]; + + /* DiSEqC message length */ + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len; + + /* Command length */ + state->dsec_cmd.len = CX24116_DISEQC_MSGOFS + + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN]; + + /* DiSEqC toneburst */ + if (toneburst == CX24116_DISEQC_MESGCACHE) + /* Message is cached */ + return 0; + + else if (toneburst == CX24116_DISEQC_TONEOFF) + /* Message is sent without burst */ + state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0; + + else if (toneburst == CX24116_DISEQC_TONECACHE) { + /* + * Message is sent with derived else cached burst + * + * WRITE PORT GROUP COMMAND 38 + * + * 0/A/A: E0 10 38 F0..F3 + * 1/B/B: E0 10 38 F4..F7 + * 2/C/A: E0 10 38 F8..FB + * 3/D/B: E0 10 38 FC..FF + * + * databyte[3]= 8421:8421 + * ABCD:WXYZ + * CLR :SET + * + * WX= PORT SELECT 0..3 (X=TONEBURST) + * Y = VOLTAGE (0=13V, 1=18V) + * Z = BAND (0=LOW, 1=HIGH(22K)) + */ + if (d->msg_len >= 4 && d->msg[2] == 0x38) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + ((d->msg[3] & 4) >> 2); + if (debug) + dprintk("%s burst=%d\n", __func__, + state->dsec_cmd.args[CX24116_DISEQC_BURST]); + } + + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if (ret != 0) + return ret; + + /* Wait for voltage/min repeat delay */ + msleep(100); + + /* Command */ + ret = cx24116_cmd_execute(fe, &state->dsec_cmd); + if (ret != 0) + return ret; + /* + * Wait for send + * + * Eutelsat spec: + * >15ms delay + (XXX determine if FW does this, see set_tone) + * 13.5ms per byte + + * >15ms delay + + * 12.5ms burst + + * >15ms delay (XXX determine if FW does this, see set_tone) + */ + msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60)); + + return 0; +} + +/* Send DiSEqC burst */ +static int cx24116_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct cx24116_state *state = fe->demodulator_priv; + int ret; + + dprintk("%s(%d) toneburst=%d\n", __func__, burst, toneburst); + + /* DiSEqC burst */ + if (burst == SEC_MINI_A) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + CX24116_DISEQC_MINI_A; + else if (burst == SEC_MINI_B) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + CX24116_DISEQC_MINI_B; + else + return -EINVAL; + + /* DiSEqC toneburst */ + if (toneburst != CX24116_DISEQC_MESGCACHE) + /* Burst is cached */ + return 0; + + /* Burst is to be sent with cached message */ + + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if (ret != 0) + return ret; + + /* Wait for voltage/min repeat delay */ + msleep(100); + + /* Command */ + ret = cx24116_cmd_execute(fe, &state->dsec_cmd); + if (ret != 0) + return ret; + + /* + * Wait for send + * + * Eutelsat spec: + * >15ms delay + (XXX determine if FW does this, see set_tone) + * 13.5ms per byte + + * >15ms delay + + * 12.5ms burst + + * >15ms delay (XXX determine if FW does this, see set_tone) + */ + msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60); + + return 0; +} + +static void cx24116_release(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s\n", __func__); + kfree(state); +} + +static struct dvb_frontend_ops cx24116_ops; + +struct dvb_frontend *cx24116_attach(const struct cx24116_config *config, + struct i2c_adapter *i2c) +{ + struct cx24116_state *state = NULL; + int ret; + + dprintk("%s\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct cx24116_state), GFP_KERNEL); + if (state == NULL) + goto error1; + + state->config = config; + state->i2c = i2c; + + /* check if the demod is present */ + ret = (cx24116_readreg(state, 0xFF) << 8) | + cx24116_readreg(state, 0xFE); + if (ret != 0x0501) { + printk(KERN_INFO "Invalid probe, probably not a CX24116 device\n"); + goto error2; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &cx24116_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error2: kfree(state); +error1: return NULL; +} +EXPORT_SYMBOL(cx24116_attach); + +/* + * Initialise or wake up device + * + * Power config will reset and load initial firmware if required + */ +static int cx24116_initfe(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + dprintk("%s()\n", __func__); + + /* Power on */ + cx24116_writereg(state, 0xe0, 0); + cx24116_writereg(state, 0xe1, 0); + cx24116_writereg(state, 0xea, 0); + + /* Firmware CMD 36: Power config */ + cmd.args[0x00] = CMD_TUNERSLEEP; + cmd.args[0x01] = 0; + cmd.len = 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + ret = cx24116_diseqc_init(fe); + if (ret != 0) + return ret; + + /* HVR-4000 needs this */ + return cx24116_set_voltage(fe, SEC_VOLTAGE_13); +} + +/* + * Put device to sleep + */ +static int cx24116_sleep(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + dprintk("%s()\n", __func__); + + /* Firmware CMD 36: Power config */ + cmd.args[0x00] = CMD_TUNERSLEEP; + cmd.args[0x01] = 1; + cmd.len = 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Power off (Shutdown clocks) */ + cx24116_writereg(state, 0xea, 0xff); + cx24116_writereg(state, 0xe1, 1); + cx24116_writereg(state, 0xe0, 1); + + return 0; +} + +/* dvb-core told us to tune, the tv property cache will be complete, + * it's safe for is to pull values and use them for tuning purposes. + */ +static int cx24116_set_frontend(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct cx24116_cmd cmd; + fe_status_t tunerstat; + int i, status, ret, retune = 1; + + dprintk("%s()\n", __func__); + + switch (c->delivery_system) { + case SYS_DVBS: + dprintk("%s: DVB-S delivery system selected\n", __func__); + + /* Only QPSK is supported for DVB-S */ + if (c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + + /* Pilot doesn't exist in DVB-S, turn bit off */ + state->dnxt.pilot_val = CX24116_PILOT_OFF; + + /* DVB-S only supports 0.35 */ + if (c->rolloff != ROLLOFF_35) { + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); + return -EOPNOTSUPP; + } + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + break; + + case SYS_DVBS2: + dprintk("%s: DVB-S2 delivery system selected\n", __func__); + + /* + * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, + * but not hardware auto detection + */ + if (c->modulation != PSK_8 && c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + + switch (c->pilot) { + case PILOT_AUTO: /* Not supported but emulated */ + state->dnxt.pilot_val = (c->modulation == QPSK) + ? CX24116_PILOT_OFF : CX24116_PILOT_ON; + retune++; + break; + case PILOT_OFF: + state->dnxt.pilot_val = CX24116_PILOT_OFF; + break; + case PILOT_ON: + state->dnxt.pilot_val = CX24116_PILOT_ON; + break; + default: + dprintk("%s: unsupported pilot mode selected (%d)\n", + __func__, c->pilot); + return -EOPNOTSUPP; + } + + switch (c->rolloff) { + case ROLLOFF_20: + state->dnxt.rolloff_val = CX24116_ROLLOFF_020; + break; + case ROLLOFF_25: + state->dnxt.rolloff_val = CX24116_ROLLOFF_025; + break; + case ROLLOFF_35: + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + break; + case ROLLOFF_AUTO: /* Rolloff must be explicit */ + default: + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); + return -EOPNOTSUPP; + } + break; + + default: + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + state->dnxt.delsys = c->delivery_system; + state->dnxt.modulation = c->modulation; + state->dnxt.frequency = c->frequency; + state->dnxt.pilot = c->pilot; + state->dnxt.rolloff = c->rolloff; + + ret = cx24116_set_inversion(state, c->inversion); + if (ret != 0) + return ret; + + /* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */ + ret = cx24116_set_fec(state, c->delivery_system, c->modulation, c->fec_inner); + if (ret != 0) + return ret; + + ret = cx24116_set_symbolrate(state, c->symbol_rate); + if (ret != 0) + return ret; + + /* discard the 'current' tuning parameters and prepare to tune */ + cx24116_clone_params(fe); + + dprintk("%s: delsys = %d\n", __func__, state->dcur.delsys); + dprintk("%s: modulation = %d\n", __func__, state->dcur.modulation); + dprintk("%s: frequency = %d\n", __func__, state->dcur.frequency); + dprintk("%s: pilot = %d (val = 0x%02x)\n", __func__, + state->dcur.pilot, state->dcur.pilot_val); + dprintk("%s: retune = %d\n", __func__, retune); + dprintk("%s: rolloff = %d (val = 0x%02x)\n", __func__, + state->dcur.rolloff, state->dcur.rolloff_val); + dprintk("%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate); + dprintk("%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__, + state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val); + dprintk("%s: Inversion = %d (val = 0x%02x)\n", __func__, + state->dcur.inversion, state->dcur.inversion_val); + + /* This is also done in advise/acquire on HVR4000 but not on LITE */ + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + /* Set/Reset B/W */ + cmd.args[0x00] = CMD_BANDWIDTH; + cmd.args[0x01] = 0x01; + cmd.len = 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Prepare a tune request */ + cmd.args[0x00] = CMD_TUNEREQUEST; + + /* Frequency */ + cmd.args[0x01] = (state->dcur.frequency & 0xff0000) >> 16; + cmd.args[0x02] = (state->dcur.frequency & 0x00ff00) >> 8; + cmd.args[0x03] = (state->dcur.frequency & 0x0000ff); + + /* Symbol Rate */ + cmd.args[0x04] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8; + cmd.args[0x05] = ((state->dcur.symbol_rate / 1000) & 0x00ff); + + /* Automatic Inversion */ + cmd.args[0x06] = state->dcur.inversion_val; + + /* Modulation / FEC / Pilot */ + cmd.args[0x07] = state->dcur.fec_val | state->dcur.pilot_val; + + cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8; + cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff; + cmd.args[0x0a] = 0x00; + cmd.args[0x0b] = 0x00; + cmd.args[0x0c] = state->dcur.rolloff_val; + cmd.args[0x0d] = state->dcur.fec_mask; + + if (state->dcur.symbol_rate > 30000000) { + cmd.args[0x0e] = 0x04; + cmd.args[0x0f] = 0x00; + cmd.args[0x10] = 0x01; + cmd.args[0x11] = 0x77; + cmd.args[0x12] = 0x36; + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x44); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x01); + } else { + cmd.args[0x0e] = 0x06; + cmd.args[0x0f] = 0x00; + cmd.args[0x10] = 0x00; + cmd.args[0x11] = 0xFA; + cmd.args[0x12] = 0x24; + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); + } + + cmd.len = 0x13; + + /* We need to support pilot and non-pilot tuning in the + * driver automatically. This is a workaround for because + * the demod does not support autodetect. + */ + do { + /* Reset status register */ + status = cx24116_readreg(state, CX24116_REG_SSTATUS) + & CX24116_SIGNAL_MASK; + cx24116_writereg(state, CX24116_REG_SSTATUS, status); + + /* Tune */ + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + break; + + /* + * Wait for up to 500 ms before retrying + * + * If we are able to tune then generally it occurs within 100ms. + * If it takes longer, try a different toneburst setting. + */ + for (i = 0; i < 50 ; i++) { + cx24116_read_status(fe, &tunerstat); + status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC); + if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { + dprintk("%s: Tuned\n", __func__); + goto tuned; + } + msleep(10); + } + + dprintk("%s: Not tuned\n", __func__); + + /* Toggle pilot bit when in auto-pilot */ + if (state->dcur.pilot == PILOT_AUTO) + cmd.args[0x07] ^= CX24116_PILOT_ON; + } while (--retune); + +tuned: /* Set/Reset B/W */ + cmd.args[0x00] = CMD_BANDWIDTH; + cmd.args[0x01] = 0x00; + cmd.len = 0x02; + return cx24116_cmd_execute(fe, &cmd); +} + +static int cx24116_tune(struct dvb_frontend *fe, bool re_tune, + unsigned int mode_flags, unsigned int *delay, fe_status_t *status) +{ + /* + * It is safe to discard "params" here, as the DVB core will sync + * fe->dtv_property_cache with fepriv->parameters_in, where the + * DVBv3 params are stored. The only practical usage for it indicate + * that re-tuning is needed, e. g. (fepriv->state & FESTATE_RETUNE) is + * true. + */ + + *delay = HZ / 5; + if (re_tune) { + int ret = cx24116_set_frontend(fe); + if (ret) + return ret; + } + return cx24116_read_status(fe, status); +} + +static int cx24116_get_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_HW; +} + +static struct dvb_frontend_ops cx24116_ops = { + .delsys = { SYS_DVBS, SYS_DVBS2 }, + .info = { + .name = "Conexant CX24116/CX24118", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1011, /* kHz for QPSK frontends */ + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_2G_MODULATION | + FE_CAN_QPSK | FE_CAN_RECOVER + }, + + .release = cx24116_release, + + .init = cx24116_initfe, + .sleep = cx24116_sleep, + .read_status = cx24116_read_status, + .read_ber = cx24116_read_ber, + .read_signal_strength = cx24116_read_signal_strength, + .read_snr = cx24116_read_snr, + .read_ucblocks = cx24116_read_ucblocks, + .set_tone = cx24116_set_tone, + .set_voltage = cx24116_set_voltage, + .diseqc_send_master_cmd = cx24116_send_diseqc_msg, + .diseqc_send_burst = cx24116_diseqc_send_burst, + .get_frontend_algo = cx24116_get_algo, + .tune = cx24116_tune, + + .set_frontend = cx24116_set_frontend, +}; + +MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/media/dvb-frontends/cx24116.h b/drivers/media/dvb-frontends/cx24116.h new file mode 100644 index 00000000..2ec84fae --- /dev/null +++ b/drivers/media/dvb-frontends/cx24116.h @@ -0,0 +1,58 @@ +/* + Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver + + Copyright (C) 2006 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef CX24116_H +#define CX24116_H + +#include +#include + +struct cx24116_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); + + /* Need to reset device during firmware loading */ + int (*reset_device)(struct dvb_frontend *fe); + + /* Need to set MPEG parameters */ + u8 mpg_clk_pos_pol:0x02; + + /* max bytes I2C provider can write at once */ + u16 i2c_wr_max; +}; + +#if IS_ENABLED(CONFIG_DVB_CX24116) +extern struct dvb_frontend *cx24116_attach( + const struct cx24116_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *cx24116_attach( + const struct cx24116_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* CX24116_H */ diff --git a/drivers/media/dvb-frontends/cx24123.c b/drivers/media/dvb-frontends/cx24123.c new file mode 100644 index 00000000..a771da3e --- /dev/null +++ b/drivers/media/dvb-frontends/cx24123.c @@ -0,0 +1,1151 @@ +/* + * Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver + * + * Copyright (C) 2005 Steven Toth + * + * Support for KWorld DVB-S 100 by Vadim Catana + * + * Support for CX24123/CX24113-NIM by Patrick Boettcher + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "cx24123.h" + +#define XTAL 10111000 + +static int force_band; +module_param(force_band, int, 0644); +MODULE_PARM_DESC(force_band, "Force a specific band select "\ + "(1-9, default:off)."); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + +#define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0) +#define err(args...) do { printk(KERN_ERR "CX24123: " args); } while (0) + +#define dprintk(args...) \ + do { \ + if (debug) { \ + printk(KERN_DEBUG "CX24123: %s: ", __func__); \ + printk(args); \ + } \ + } while (0) + +struct cx24123_state { + struct i2c_adapter *i2c; + const struct cx24123_config *config; + + struct dvb_frontend frontend; + + /* Some PLL specifics for tuning */ + u32 VCAarg; + u32 VGAarg; + u32 bandselectarg; + u32 pllarg; + u32 FILTune; + + struct i2c_adapter tuner_i2c_adapter; + + u8 demod_rev; + + /* The Demod/Tuner can't easily provide these, we cache them */ + u32 currentfreq; + u32 currentsymbolrate; +}; + +/* Various tuner defaults need to be established for a given symbol rate Sps */ +static struct cx24123_AGC_val { + u32 symbolrate_low; + u32 symbolrate_high; + u32 VCAprogdata; + u32 VGAprogdata; + u32 FILTune; +} cx24123_AGC_vals[] = +{ + { + .symbolrate_low = 1000000, + .symbolrate_high = 4999999, + /* the specs recommend other values for VGA offsets, + but tests show they are wrong */ + .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0, + .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x07, + .FILTune = 0x27f /* 0.41 V */ + }, + { + .symbolrate_low = 5000000, + .symbolrate_high = 14999999, + .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0, + .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x1f, + .FILTune = 0x317 /* 0.90 V */ + }, + { + .symbolrate_low = 15000000, + .symbolrate_high = 45000000, + .VGAprogdata = (1 << 19) | (0x100 << 9) | 0x180, + .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x3f, + .FILTune = 0x145 /* 2.70 V */ + }, +}; + +/* + * Various tuner defaults need to be established for a given frequency kHz. + * fixme: The bounds on the bands do not match the doc in real life. + * fixme: Some of them have been moved, other might need adjustment. + */ +static struct cx24123_bandselect_val { + u32 freq_low; + u32 freq_high; + u32 VCOdivider; + u32 progdata; +} cx24123_bandselect_vals[] = +{ + /* band 1 */ + { + .freq_low = 950000, + .freq_high = 1074999, + .VCOdivider = 4, + .progdata = (0 << 19) | (0 << 9) | 0x40, + }, + + /* band 2 */ + { + .freq_low = 1075000, + .freq_high = 1177999, + .VCOdivider = 4, + .progdata = (0 << 19) | (0 << 9) | 0x80, + }, + + /* band 3 */ + { + .freq_low = 1178000, + .freq_high = 1295999, + .VCOdivider = 2, + .progdata = (0 << 19) | (1 << 9) | 0x01, + }, + + /* band 4 */ + { + .freq_low = 1296000, + .freq_high = 1431999, + .VCOdivider = 2, + .progdata = (0 << 19) | (1 << 9) | 0x02, + }, + + /* band 5 */ + { + .freq_low = 1432000, + .freq_high = 1575999, + .VCOdivider = 2, + .progdata = (0 << 19) | (1 << 9) | 0x04, + }, + + /* band 6 */ + { + .freq_low = 1576000, + .freq_high = 1717999, + .VCOdivider = 2, + .progdata = (0 << 19) | (1 << 9) | 0x08, + }, + + /* band 7 */ + { + .freq_low = 1718000, + .freq_high = 1855999, + .VCOdivider = 2, + .progdata = (0 << 19) | (1 << 9) | 0x10, + }, + + /* band 8 */ + { + .freq_low = 1856000, + .freq_high = 2035999, + .VCOdivider = 2, + .progdata = (0 << 19) | (1 << 9) | 0x20, + }, + + /* band 9 */ + { + .freq_low = 2036000, + .freq_high = 2150000, + .VCOdivider = 2, + .progdata = (0 << 19) | (1 << 9) | 0x40, + }, +}; + +static struct { + u8 reg; + u8 data; +} cx24123_regdata[] = +{ + {0x00, 0x03}, /* Reset system */ + {0x00, 0x00}, /* Clear reset */ + {0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */ + {0x04, 0x10}, /* MPEG */ + {0x05, 0x04}, /* MPEG */ + {0x06, 0x31}, /* MPEG (default) */ + {0x0b, 0x00}, /* Freq search start point (default) */ + {0x0c, 0x00}, /* Demodulator sample gain (default) */ + {0x0d, 0x7f}, /* Force driver to shift until the maximum (+-10 MHz) */ + {0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */ + {0x0f, 0xfe}, /* FEC search mask (all supported codes) */ + {0x10, 0x01}, /* Default search inversion, no repeat (default) */ + {0x16, 0x00}, /* Enable reading of frequency */ + {0x17, 0x01}, /* Enable EsNO Ready Counter */ + {0x1c, 0x80}, /* Enable error counter */ + {0x20, 0x00}, /* Tuner burst clock rate = 500KHz */ + {0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */ + {0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */ + {0x29, 0x00}, /* DiSEqC LNB_DC off */ + {0x2a, 0xb0}, /* DiSEqC Parameters (default) */ + {0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */ + {0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */ + {0x2d, 0x00}, + {0x2e, 0x00}, + {0x2f, 0x00}, + {0x30, 0x00}, + {0x31, 0x00}, + {0x32, 0x8c}, /* DiSEqC Parameters (default) */ + {0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */ + {0x34, 0x00}, + {0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */ + {0x36, 0x02}, /* DiSEqC Parameters (default) */ + {0x37, 0x3a}, /* DiSEqC Parameters (default) */ + {0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */ + {0x44, 0x00}, /* Constellation (default) */ + {0x45, 0x00}, /* Symbol count (default) */ + {0x46, 0x0d}, /* Symbol rate estimator on (default) */ + {0x56, 0xc1}, /* Error Counter = Viterbi BER */ + {0x57, 0xff}, /* Error Counter Window (default) */ + {0x5c, 0x20}, /* Acquisition AFC Expiration window (default is 0x10) */ + {0x67, 0x83}, /* Non-DCII symbol clock */ +}; + +static int cx24123_i2c_writereg(struct cx24123_state *state, + u8 i2c_addr, int reg, int data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 + }; + int err; + + /* printk(KERN_DEBUG "wr(%02x): %02x %02x\n", i2c_addr, reg, data); */ + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + printk("%s: writereg error(err == %i, reg == 0x%02x," + " data == 0x%02x)\n", __func__, err, reg, data); + return err; + } + + return 0; +} + +static int cx24123_i2c_readreg(struct cx24123_state *state, u8 i2c_addr, u8 reg) +{ + int ret; + u8 b = 0; + struct i2c_msg msg[] = { + { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, + { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &b, .len = 1 } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + err("%s: reg=0x%x (error=%d)\n", __func__, reg, ret); + return ret; + } + + /* printk(KERN_DEBUG "rd(%02x): %02x %02x\n", i2c_addr, reg, b); */ + + return b; +} + +#define cx24123_readreg(state, reg) \ + cx24123_i2c_readreg(state, state->config->demod_address, reg) +#define cx24123_writereg(state, reg, val) \ + cx24123_i2c_writereg(state, state->config->demod_address, reg, val) + +static int cx24123_set_inversion(struct cx24123_state *state, + fe_spectral_inversion_t inversion) +{ + u8 nom_reg = cx24123_readreg(state, 0x0e); + u8 auto_reg = cx24123_readreg(state, 0x10); + + switch (inversion) { + case INVERSION_OFF: + dprintk("inversion off\n"); + cx24123_writereg(state, 0x0e, nom_reg & ~0x80); + cx24123_writereg(state, 0x10, auto_reg | 0x80); + break; + case INVERSION_ON: + dprintk("inversion on\n"); + cx24123_writereg(state, 0x0e, nom_reg | 0x80); + cx24123_writereg(state, 0x10, auto_reg | 0x80); + break; + case INVERSION_AUTO: + dprintk("inversion auto\n"); + cx24123_writereg(state, 0x10, auto_reg & ~0x80); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int cx24123_get_inversion(struct cx24123_state *state, + fe_spectral_inversion_t *inversion) +{ + u8 val; + + val = cx24123_readreg(state, 0x1b) >> 7; + + if (val == 0) { + dprintk("read inversion off\n"); + *inversion = INVERSION_OFF; + } else { + dprintk("read inversion on\n"); + *inversion = INVERSION_ON; + } + + return 0; +} + +static int cx24123_set_fec(struct cx24123_state *state, fe_code_rate_t fec) +{ + u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07; + + if (((int)fec < FEC_NONE) || (fec > FEC_AUTO)) + fec = FEC_AUTO; + + /* Set the soft decision threshold */ + if (fec == FEC_1_2) + cx24123_writereg(state, 0x43, + cx24123_readreg(state, 0x43) | 0x01); + else + cx24123_writereg(state, 0x43, + cx24123_readreg(state, 0x43) & ~0x01); + + switch (fec) { + case FEC_1_2: + dprintk("set FEC to 1/2\n"); + cx24123_writereg(state, 0x0e, nom_reg | 0x01); + cx24123_writereg(state, 0x0f, 0x02); + break; + case FEC_2_3: + dprintk("set FEC to 2/3\n"); + cx24123_writereg(state, 0x0e, nom_reg | 0x02); + cx24123_writereg(state, 0x0f, 0x04); + break; + case FEC_3_4: + dprintk("set FEC to 3/4\n"); + cx24123_writereg(state, 0x0e, nom_reg | 0x03); + cx24123_writereg(state, 0x0f, 0x08); + break; + case FEC_4_5: + dprintk("set FEC to 4/5\n"); + cx24123_writereg(state, 0x0e, nom_reg | 0x04); + cx24123_writereg(state, 0x0f, 0x10); + break; + case FEC_5_6: + dprintk("set FEC to 5/6\n"); + cx24123_writereg(state, 0x0e, nom_reg | 0x05); + cx24123_writereg(state, 0x0f, 0x20); + break; + case FEC_6_7: + dprintk("set FEC to 6/7\n"); + cx24123_writereg(state, 0x0e, nom_reg | 0x06); + cx24123_writereg(state, 0x0f, 0x40); + break; + case FEC_7_8: + dprintk("set FEC to 7/8\n"); + cx24123_writereg(state, 0x0e, nom_reg | 0x07); + cx24123_writereg(state, 0x0f, 0x80); + break; + case FEC_AUTO: + dprintk("set FEC to auto\n"); + cx24123_writereg(state, 0x0f, 0xfe); + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int cx24123_get_fec(struct cx24123_state *state, fe_code_rate_t *fec) +{ + int ret; + + ret = cx24123_readreg(state, 0x1b); + if (ret < 0) + return ret; + ret = ret & 0x07; + + switch (ret) { + case 1: + *fec = FEC_1_2; + break; + case 2: + *fec = FEC_2_3; + break; + case 3: + *fec = FEC_3_4; + break; + case 4: + *fec = FEC_4_5; + break; + case 5: + *fec = FEC_5_6; + break; + case 6: + *fec = FEC_6_7; + break; + case 7: + *fec = FEC_7_8; + break; + default: + /* this can happen when there's no lock */ + *fec = FEC_NONE; + } + + return 0; +} + +/* Approximation of closest integer of log2(a/b). It actually gives the + lowest integer i such that 2^i >= round(a/b) */ +static u32 cx24123_int_log2(u32 a, u32 b) +{ + u32 exp, nearest = 0; + u32 div = a / b; + if (a % b >= b / 2) + ++div; + if (div < (1 << 31)) { + for (exp = 1; div > exp; nearest++) + exp += exp; + } + return nearest; +} + +static int cx24123_set_symbolrate(struct cx24123_state *state, u32 srate) +{ + u64 tmp; + u32 sample_rate, ratio, sample_gain; + u8 pll_mult; + + /* check if symbol rate is within limits */ + if ((srate > state->frontend.ops.info.symbol_rate_max) || + (srate < state->frontend.ops.info.symbol_rate_min)) + return -EOPNOTSUPP; + + /* choose the sampling rate high enough for the required operation, + while optimizing the power consumed by the demodulator */ + if (srate < (XTAL*2)/2) + pll_mult = 2; + else if (srate < (XTAL*3)/2) + pll_mult = 3; + else if (srate < (XTAL*4)/2) + pll_mult = 4; + else if (srate < (XTAL*5)/2) + pll_mult = 5; + else if (srate < (XTAL*6)/2) + pll_mult = 6; + else if (srate < (XTAL*7)/2) + pll_mult = 7; + else if (srate < (XTAL*8)/2) + pll_mult = 8; + else + pll_mult = 9; + + + sample_rate = pll_mult * XTAL; + + /* SYSSymbolRate[21:0] = (srate << 23) / sample_rate */ + + tmp = ((u64)srate) << 23; + do_div(tmp, sample_rate); + ratio = (u32) tmp; + + cx24123_writereg(state, 0x01, pll_mult * 6); + + cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f); + cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff); + cx24123_writereg(state, 0x0a, ratio & 0xff); + + /* also set the demodulator sample gain */ + sample_gain = cx24123_int_log2(sample_rate, srate); + tmp = cx24123_readreg(state, 0x0c) & ~0xe0; + cx24123_writereg(state, 0x0c, tmp | sample_gain << 5); + + dprintk("srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", + srate, ratio, sample_rate, sample_gain); + + return 0; +} + +/* + * Based on the required frequency and symbolrate, the tuner AGC has + * to be configured and the correct band selected. + * Calculate those values. + */ +static int cx24123_pll_calculate(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct cx24123_state *state = fe->demodulator_priv; + u32 ndiv = 0, adiv = 0, vco_div = 0; + int i = 0; + int pump = 2; + int band = 0; + int num_bands = ARRAY_SIZE(cx24123_bandselect_vals); + struct cx24123_bandselect_val *bsv = NULL; + struct cx24123_AGC_val *agcv = NULL; + + /* Defaults for low freq, low rate */ + state->VCAarg = cx24123_AGC_vals[0].VCAprogdata; + state->VGAarg = cx24123_AGC_vals[0].VGAprogdata; + state->bandselectarg = cx24123_bandselect_vals[0].progdata; + vco_div = cx24123_bandselect_vals[0].VCOdivider; + + /* For the given symbol rate, determine the VCA, VGA and + * FILTUNE programming bits */ + for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++) { + agcv = &cx24123_AGC_vals[i]; + if ((agcv->symbolrate_low <= p->symbol_rate) && + (agcv->symbolrate_high >= p->symbol_rate)) { + state->VCAarg = agcv->VCAprogdata; + state->VGAarg = agcv->VGAprogdata; + state->FILTune = agcv->FILTune; + } + } + + /* determine the band to use */ + if (force_band < 1 || force_band > num_bands) { + for (i = 0; i < num_bands; i++) { + bsv = &cx24123_bandselect_vals[i]; + if ((bsv->freq_low <= p->frequency) && + (bsv->freq_high >= p->frequency)) + band = i; + } + } else + band = force_band - 1; + + state->bandselectarg = cx24123_bandselect_vals[band].progdata; + vco_div = cx24123_bandselect_vals[band].VCOdivider; + + /* determine the charge pump current */ + if (p->frequency < (cx24123_bandselect_vals[band].freq_low + + cx24123_bandselect_vals[band].freq_high) / 2) + pump = 0x01; + else + pump = 0x02; + + /* Determine the N/A dividers for the requested lband freq (in kHz). */ + /* Note: the reference divider R=10, frequency is in KHz, + * XTAL is in Hz */ + ndiv = (((p->frequency * vco_div * 10) / + (2 * XTAL / 1000)) / 32) & 0x1ff; + adiv = (((p->frequency * vco_div * 10) / + (2 * XTAL / 1000)) % 32) & 0x1f; + + if (adiv == 0 && ndiv > 0) + ndiv--; + + /* control bits 11, refdiv 11, charge pump polarity 1, + * charge pump current, ndiv, adiv */ + state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | + (pump << 14) | (ndiv << 5) | adiv; + + return 0; +} + +/* + * Tuner data is 21 bits long, must be left-aligned in data. + * Tuner cx24109 is written through a dedicated 3wire interface + * on the demod chip. + */ +static int cx24123_pll_writereg(struct dvb_frontend *fe, u32 data) +{ + struct cx24123_state *state = fe->demodulator_priv; + unsigned long timeout; + + dprintk("pll writereg called, data=0x%08x\n", data); + + /* align the 21 bytes into to bit23 boundary */ + data = data << 3; + + /* Reset the demod pll word length to 0x15 bits */ + cx24123_writereg(state, 0x21, 0x15); + + /* write the msb 8 bits, wait for the send to be completed */ + timeout = jiffies + msecs_to_jiffies(40); + cx24123_writereg(state, 0x22, (data >> 16) & 0xff); + while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { + if (time_after(jiffies, timeout)) { + err("%s: demodulator is not responding, "\ + "possibly hung, aborting.\n", __func__); + return -EREMOTEIO; + } + msleep(10); + } + + /* send another 8 bytes, wait for the send to be completed */ + timeout = jiffies + msecs_to_jiffies(40); + cx24123_writereg(state, 0x22, (data >> 8) & 0xff); + while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { + if (time_after(jiffies, timeout)) { + err("%s: demodulator is not responding, "\ + "possibly hung, aborting.\n", __func__); + return -EREMOTEIO; + } + msleep(10); + } + + /* send the lower 5 bits of this byte, padded with 3 LBB, + * wait for the send to be completed */ + timeout = jiffies + msecs_to_jiffies(40); + cx24123_writereg(state, 0x22, (data) & 0xff); + while ((cx24123_readreg(state, 0x20) & 0x80)) { + if (time_after(jiffies, timeout)) { + err("%s: demodulator is not responding," \ + "possibly hung, aborting.\n", __func__); + return -EREMOTEIO; + } + msleep(10); + } + + /* Trigger the demod to configure the tuner */ + cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) | 2); + cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) & 0xfd); + + return 0; +} + +static int cx24123_pll_tune(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct cx24123_state *state = fe->demodulator_priv; + u8 val; + + dprintk("frequency=%i\n", p->frequency); + + if (cx24123_pll_calculate(fe) != 0) { + err("%s: cx24123_pll_calcutate failed\n", __func__); + return -EINVAL; + } + + /* Write the new VCO/VGA */ + cx24123_pll_writereg(fe, state->VCAarg); + cx24123_pll_writereg(fe, state->VGAarg); + + /* Write the new bandselect and pll args */ + cx24123_pll_writereg(fe, state->bandselectarg); + cx24123_pll_writereg(fe, state->pllarg); + + /* set the FILTUNE voltage */ + val = cx24123_readreg(state, 0x28) & ~0x3; + cx24123_writereg(state, 0x27, state->FILTune >> 2); + cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3)); + + dprintk("pll tune VCA=%d, band=%d, pll=%d\n", state->VCAarg, + state->bandselectarg, state->pllarg); + + return 0; +} + + +/* + * 0x23: + * [7:7] = BTI enabled + * [6:6] = I2C repeater enabled + * [5:5] = I2C repeater start + * [0:0] = BTI start + */ + +/* mode == 1 -> i2c-repeater, 0 -> bti */ +static int cx24123_repeater_mode(struct cx24123_state *state, u8 mode, u8 start) +{ + u8 r = cx24123_readreg(state, 0x23) & 0x1e; + if (mode) + r |= (1 << 6) | (start << 5); + else + r |= (1 << 7) | (start); + return cx24123_writereg(state, 0x23, r); +} + +static int cx24123_initfe(struct dvb_frontend *fe) +{ + struct cx24123_state *state = fe->demodulator_priv; + int i; + + dprintk("init frontend\n"); + + /* Configure the demod to a good set of defaults */ + for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++) + cx24123_writereg(state, cx24123_regdata[i].reg, + cx24123_regdata[i].data); + + /* Set the LNB polarity */ + if (state->config->lnb_polarity) + cx24123_writereg(state, 0x32, + cx24123_readreg(state, 0x32) | 0x02); + + if (state->config->dont_use_pll) + cx24123_repeater_mode(state, 1, 0); + + return 0; +} + +static int cx24123_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx24123_state *state = fe->demodulator_priv; + u8 val; + + val = cx24123_readreg(state, 0x29) & ~0x40; + + switch (voltage) { + case SEC_VOLTAGE_13: + dprintk("setting voltage 13V\n"); + return cx24123_writereg(state, 0x29, val & 0x7f); + case SEC_VOLTAGE_18: + dprintk("setting voltage 18V\n"); + return cx24123_writereg(state, 0x29, val | 0x80); + case SEC_VOLTAGE_OFF: + /* already handled in cx88-dvb */ + return 0; + default: + return -EINVAL; + }; + + return 0; +} + +/* wait for diseqc queue to become ready (or timeout) */ +static void cx24123_wait_for_diseqc(struct cx24123_state *state) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(200); + while (!(cx24123_readreg(state, 0x29) & 0x40)) { + if (time_after(jiffies, timeout)) { + err("%s: diseqc queue not ready, " \ + "command may be lost.\n", __func__); + break; + } + msleep(10); + } +} + +static int cx24123_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) +{ + struct cx24123_state *state = fe->demodulator_priv; + int i, val, tone; + + dprintk("\n"); + + /* stop continuous tone if enabled */ + tone = cx24123_readreg(state, 0x29); + if (tone & 0x10) + cx24123_writereg(state, 0x29, tone & ~0x50); + + /* wait for diseqc queue ready */ + cx24123_wait_for_diseqc(state); + + /* select tone mode */ + cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb); + + for (i = 0; i < cmd->msg_len; i++) + cx24123_writereg(state, 0x2C + i, cmd->msg[i]); + + val = cx24123_readreg(state, 0x29); + cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | + ((cmd->msg_len-3) & 3)); + + /* wait for diseqc message to finish sending */ + cx24123_wait_for_diseqc(state); + + /* restart continuous tone if enabled */ + if (tone & 0x10) + cx24123_writereg(state, 0x29, tone & ~0x40); + + return 0; +} + +static int cx24123_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct cx24123_state *state = fe->demodulator_priv; + int val, tone; + + dprintk("\n"); + + /* stop continuous tone if enabled */ + tone = cx24123_readreg(state, 0x29); + if (tone & 0x10) + cx24123_writereg(state, 0x29, tone & ~0x50); + + /* wait for diseqc queue ready */ + cx24123_wait_for_diseqc(state); + + /* select tone mode */ + cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) | 0x4); + msleep(30); + val = cx24123_readreg(state, 0x29); + if (burst == SEC_MINI_A) + cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00)); + else if (burst == SEC_MINI_B) + cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08)); + else + return -EINVAL; + + cx24123_wait_for_diseqc(state); + cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb); + + /* restart continuous tone if enabled */ + if (tone & 0x10) + cx24123_writereg(state, 0x29, tone & ~0x40); + + return 0; +} + +static int cx24123_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct cx24123_state *state = fe->demodulator_priv; + int sync = cx24123_readreg(state, 0x14); + + *status = 0; + if (state->config->dont_use_pll) { + u32 tun_status = 0; + if (fe->ops.tuner_ops.get_status) + fe->ops.tuner_ops.get_status(fe, &tun_status); + if (tun_status & TUNER_STATUS_LOCKED) + *status |= FE_HAS_SIGNAL; + } else { + int lock = cx24123_readreg(state, 0x20); + if (lock & 0x01) + *status |= FE_HAS_SIGNAL; + } + + if (sync & 0x02) + *status |= FE_HAS_CARRIER; /* Phase locked */ + if (sync & 0x04) + *status |= FE_HAS_VITERBI; + + /* Reed-Solomon Status */ + if (sync & 0x08) + *status |= FE_HAS_SYNC; + if (sync & 0x80) + *status |= FE_HAS_LOCK; /*Full Sync */ + + return 0; +} + +/* + * Configured to return the measurement of errors in blocks, + * because no UCBLOCKS value is available, so this value doubles up + * to satisfy both measurements. + */ +static int cx24123_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct cx24123_state *state = fe->demodulator_priv; + + /* The true bit error rate is this value divided by + the window size (set as 256 * 255) */ + *ber = ((cx24123_readreg(state, 0x1c) & 0x3f) << 16) | + (cx24123_readreg(state, 0x1d) << 8 | + cx24123_readreg(state, 0x1e)); + + dprintk("BER = %d\n", *ber); + + return 0; +} + +static int cx24123_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + struct cx24123_state *state = fe->demodulator_priv; + + /* larger = better */ + *signal_strength = cx24123_readreg(state, 0x3b) << 8; + + dprintk("Signal strength = %d\n", *signal_strength); + + return 0; +} + +static int cx24123_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct cx24123_state *state = fe->demodulator_priv; + + /* Inverted raw Es/N0 count, totally bogus but better than the + BER threshold. */ + *snr = 65535 - (((u16)cx24123_readreg(state, 0x18) << 8) | + (u16)cx24123_readreg(state, 0x19)); + + dprintk("read S/N index = %d\n", *snr); + + return 0; +} + +static int cx24123_set_frontend(struct dvb_frontend *fe) +{ + struct cx24123_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + + dprintk("\n"); + + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + state->currentfreq = p->frequency; + state->currentsymbolrate = p->symbol_rate; + + cx24123_set_inversion(state, p->inversion); + cx24123_set_fec(state, p->fec_inner); + cx24123_set_symbolrate(state, p->symbol_rate); + + if (!state->config->dont_use_pll) + cx24123_pll_tune(fe); + else if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + else + err("it seems I don't have a tuner..."); + + /* Enable automatic acquisition and reset cycle */ + cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07)); + cx24123_writereg(state, 0x00, 0x10); + cx24123_writereg(state, 0x00, 0); + + if (state->config->agc_callback) + state->config->agc_callback(fe); + + return 0; +} + +static int cx24123_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct cx24123_state *state = fe->demodulator_priv; + + dprintk("\n"); + + if (cx24123_get_inversion(state, &p->inversion) != 0) { + err("%s: Failed to get inversion status\n", __func__); + return -EREMOTEIO; + } + if (cx24123_get_fec(state, &p->fec_inner) != 0) { + err("%s: Failed to get fec status\n", __func__); + return -EREMOTEIO; + } + p->frequency = state->currentfreq; + p->symbol_rate = state->currentsymbolrate; + + return 0; +} + +static int cx24123_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct cx24123_state *state = fe->demodulator_priv; + u8 val; + + /* wait for diseqc queue ready */ + cx24123_wait_for_diseqc(state); + + val = cx24123_readreg(state, 0x29) & ~0x40; + + switch (tone) { + case SEC_TONE_ON: + dprintk("setting tone on\n"); + return cx24123_writereg(state, 0x29, val | 0x10); + case SEC_TONE_OFF: + dprintk("setting tone off\n"); + return cx24123_writereg(state, 0x29, val & 0xef); + default: + err("CASE reached default with tone=%d\n", tone); + return -EINVAL; + } + + return 0; +} + +static int cx24123_tune(struct dvb_frontend *fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + fe_status_t *status) +{ + int retval = 0; + + if (re_tune) + retval = cx24123_set_frontend(fe); + + if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) + cx24123_read_status(fe, status); + *delay = HZ/10; + + return retval; +} + +static int cx24123_get_algo(struct dvb_frontend *fe) +{ + return 1; /* FE_ALGO_HW */ +} + +static void cx24123_release(struct dvb_frontend *fe) +{ + struct cx24123_state *state = fe->demodulator_priv; + dprintk("\n"); + i2c_del_adapter(&state->tuner_i2c_adapter); + kfree(state); +} + +static int cx24123_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct cx24123_state *state = i2c_get_adapdata(i2c_adap); + /* this repeater closes after the first stop */ + cx24123_repeater_mode(state, 1, 1); + return i2c_transfer(state->i2c, msg, num); +} + +static u32 cx24123_tuner_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm cx24123_tuner_i2c_algo = { + .master_xfer = cx24123_tuner_i2c_tuner_xfer, + .functionality = cx24123_tuner_i2c_func, +}; + +struct i2c_adapter * + cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + struct cx24123_state *state = fe->demodulator_priv; + return &state->tuner_i2c_adapter; +} +EXPORT_SYMBOL(cx24123_get_tuner_i2c_adapter); + +static struct dvb_frontend_ops cx24123_ops; + +struct dvb_frontend *cx24123_attach(const struct cx24123_config *config, + struct i2c_adapter *i2c) +{ + /* allocate memory for the internal state */ + struct cx24123_state *state = + kzalloc(sizeof(struct cx24123_state), GFP_KERNEL); + + dprintk("\n"); + if (state == NULL) { + err("Unable to kzalloc\n"); + goto error; + } + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* check if the demod is there */ + state->demod_rev = cx24123_readreg(state, 0x00); + switch (state->demod_rev) { + case 0xe1: + info("detected CX24123C\n"); + break; + case 0xd1: + info("detected CX24123\n"); + break; + default: + err("wrong demod revision: %x\n", state->demod_rev); + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &cx24123_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + /* create tuner i2c adapter */ + if (config->dont_use_pll) + cx24123_repeater_mode(state, 1, 0); + + strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus", + sizeof(state->tuner_i2c_adapter.name)); + state->tuner_i2c_adapter.algo = &cx24123_tuner_i2c_algo; + state->tuner_i2c_adapter.algo_data = NULL; + i2c_set_adapdata(&state->tuner_i2c_adapter, state); + if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) { + err("tuner i2c bus could not be initialized\n"); + goto error; + } + + return &state->frontend; + +error: + kfree(state); + + return NULL; +} +EXPORT_SYMBOL(cx24123_attach); + +static struct dvb_frontend_ops cx24123_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Conexant CX24123/CX24109", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1011, /* kHz for QPSK frontends */ + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_RECOVER + }, + + .release = cx24123_release, + + .init = cx24123_initfe, + .set_frontend = cx24123_set_frontend, + .get_frontend = cx24123_get_frontend, + .read_status = cx24123_read_status, + .read_ber = cx24123_read_ber, + .read_signal_strength = cx24123_read_signal_strength, + .read_snr = cx24123_read_snr, + .diseqc_send_master_cmd = cx24123_send_diseqc_msg, + .diseqc_send_burst = cx24123_diseqc_send_burst, + .set_tone = cx24123_set_tone, + .set_voltage = cx24123_set_voltage, + .tune = cx24123_tune, + .get_frontend_algo = cx24123_get_algo, +}; + +MODULE_DESCRIPTION("DVB Frontend module for Conexant " \ + "CX24123/CX24109/CX24113 hardware"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/media/dvb-frontends/cx24123.h b/drivers/media/dvb-frontends/cx24123.h new file mode 100644 index 00000000..102e70d1 --- /dev/null +++ b/drivers/media/dvb-frontends/cx24123.h @@ -0,0 +1,61 @@ +/* + Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver + + Copyright (C) 2005 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef CX24123_H +#define CX24123_H + +#include +#include + +struct cx24123_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); + + /* 0 = LNB voltage normal, 1 = LNB voltage inverted */ + int lnb_polarity; + + /* this device has another tuner */ + u8 dont_use_pll; + void (*agc_callback) (struct dvb_frontend *); +}; + +#if IS_ENABLED(CONFIG_DVB_CX24123) +extern struct dvb_frontend *cx24123_attach(const struct cx24123_config *config, + struct i2c_adapter *i2c); +extern struct i2c_adapter *cx24123_get_tuner_i2c_adapter(struct dvb_frontend *); +#else +static inline struct dvb_frontend *cx24123_attach( + const struct cx24123_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static struct i2c_adapter * + cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* CX24123_H */ diff --git a/drivers/media/dvb-frontends/cxd2820r.h b/drivers/media/dvb-frontends/cxd2820r.h new file mode 100644 index 00000000..82b3d937 --- /dev/null +++ b/drivers/media/dvb-frontends/cxd2820r.h @@ -0,0 +1,88 @@ +/* + * Sony CXD2820R demodulator driver + * + * Copyright (C) 2010 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +#ifndef CXD2820R_H +#define CXD2820R_H + +#include +#include + +#define CXD2820R_GPIO_D (0 << 0) /* disable */ +#define CXD2820R_GPIO_E (1 << 0) /* enable */ +#define CXD2820R_GPIO_O (0 << 1) /* output */ +#define CXD2820R_GPIO_I (1 << 1) /* input */ +#define CXD2820R_GPIO_L (0 << 2) /* output low */ +#define CXD2820R_GPIO_H (1 << 2) /* output high */ + +#define CXD2820R_TS_SERIAL 0x08 +#define CXD2820R_TS_SERIAL_MSB 0x28 +#define CXD2820R_TS_PARALLEL 0x30 +#define CXD2820R_TS_PARALLEL_MSB 0x70 + +struct cxd2820r_config { + /* Demodulator I2C address. + * Driver determines DVB-C slave I2C address automatically from master + * address. + * Default: none, must set + * Values: 0x6c, 0x6d + */ + u8 i2c_address; + + /* TS output mode. + * Default: none, must set. + * Values: + */ + u8 ts_mode; + + /* IF AGC polarity. + * Default: 0 + * Values: 0, 1 + */ + bool if_agc_polarity; + + /* Spectrum inversion. + * Default: 0 + * Values: 0, 1 + */ + bool spec_inv; +}; + + +#if IS_ENABLED(CONFIG_DVB_CXD2820R) +extern struct dvb_frontend *cxd2820r_attach( + const struct cxd2820r_config *config, + struct i2c_adapter *i2c, + int *gpio_chip_base +); +#else +static inline struct dvb_frontend *cxd2820r_attach( + const struct cxd2820r_config *config, + struct i2c_adapter *i2c, + int *gpio_chip_base +) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif + +#endif /* CXD2820R_H */ diff --git a/drivers/media/dvb-frontends/cxd2820r_c.c b/drivers/media/dvb-frontends/cxd2820r_c.c new file mode 100644 index 00000000..125a4404 --- /dev/null +++ b/drivers/media/dvb-frontends/cxd2820r_c.c @@ -0,0 +1,343 @@ +/* + * Sony CXD2820R demodulator driver + * + * Copyright (C) 2010 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +#include "cxd2820r_priv.h" + +int cxd2820r_set_frontend_c(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i; + u8 buf[2]; + u32 if_freq; + u16 if_ctl; + u64 num; + struct reg_val_mask tab[] = { + { 0x00080, 0x01, 0xff }, + { 0x00081, 0x05, 0xff }, + { 0x00085, 0x07, 0xff }, + { 0x00088, 0x01, 0xff }, + + { 0x00082, 0x20, 0x60 }, + { 0x1016a, 0x48, 0xff }, + { 0x100a5, 0x00, 0x01 }, + { 0x10020, 0x06, 0x07 }, + { 0x10059, 0x50, 0xff }, + { 0x10087, 0x0c, 0x3c }, + { 0x1008b, 0x07, 0xff }, + { 0x1001f, priv->cfg.if_agc_polarity << 7, 0x80 }, + { 0x10070, priv->cfg.ts_mode, 0xff }, + }; + + dev_dbg(&priv->i2c->dev, "%s: frequency=%d symbol_rate=%d\n", __func__, + c->frequency, c->symbol_rate); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + if (priv->delivery_system != SYS_DVBC_ANNEX_A) { + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, + tab[i].val, tab[i].mask); + if (ret) + goto error; + } + } + + priv->delivery_system = SYS_DVBC_ANNEX_A; + priv->ber_running = 0; /* tune stops BER counter */ + + /* program IF frequency */ + if (fe->ops.tuner_ops.get_if_frequency) { + ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); + if (ret) + goto error; + } else + if_freq = 0; + + dev_dbg(&priv->i2c->dev, "%s: if_freq=%d\n", __func__, if_freq); + + num = if_freq / 1000; /* Hz => kHz */ + num *= 0x4000; + if_ctl = cxd2820r_div_u64_round_closest(num, 41000); + buf[0] = (if_ctl >> 8) & 0x3f; + buf[1] = (if_ctl >> 0) & 0xff; + + ret = cxd2820r_wr_regs(priv, 0x10042, buf, 2); + if (ret) + goto error; + + ret = cxd2820r_wr_reg(priv, 0x000ff, 0x08); + if (ret) + goto error; + + ret = cxd2820r_wr_reg(priv, 0x000fe, 0x01); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_get_frontend_c(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + u8 buf[2]; + + ret = cxd2820r_rd_regs(priv, 0x1001a, buf, 2); + if (ret) + goto error; + + c->symbol_rate = 2500 * ((buf[0] & 0x0f) << 8 | buf[1]); + + ret = cxd2820r_rd_reg(priv, 0x10019, &buf[0]); + if (ret) + goto error; + + switch ((buf[0] >> 0) & 0x07) { + case 0: + c->modulation = QAM_16; + break; + case 1: + c->modulation = QAM_32; + break; + case 2: + c->modulation = QAM_64; + break; + case 3: + c->modulation = QAM_128; + break; + case 4: + c->modulation = QAM_256; + break; + } + + switch ((buf[0] >> 7) & 0x01) { + case 0: + c->inversion = INVERSION_OFF; + break; + case 1: + c->inversion = INVERSION_ON; + break; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_ber_c(struct dvb_frontend *fe, u32 *ber) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[3], start_ber = 0; + *ber = 0; + + if (priv->ber_running) { + ret = cxd2820r_rd_regs(priv, 0x10076, buf, sizeof(buf)); + if (ret) + goto error; + + if ((buf[2] >> 7) & 0x01 || (buf[2] >> 4) & 0x01) { + *ber = (buf[2] & 0x0f) << 16 | buf[1] << 8 | buf[0]; + start_ber = 1; + } + } else { + priv->ber_running = 1; + start_ber = 1; + } + + if (start_ber) { + /* (re)start BER */ + ret = cxd2820r_wr_reg(priv, 0x10079, 0x01); + if (ret) + goto error; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_signal_strength_c(struct dvb_frontend *fe, + u16 *strength) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + u16 tmp; + + ret = cxd2820r_rd_regs(priv, 0x10049, buf, sizeof(buf)); + if (ret) + goto error; + + tmp = (buf[0] & 0x03) << 8 | buf[1]; + tmp = (~tmp & 0x03ff); + + if (tmp == 512) + /* ~no signal */ + tmp = 0; + else if (tmp > 350) + tmp = 350; + + /* scale value to 0x0000-0xffff */ + *strength = tmp * 0xffff / (350-0); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_snr_c(struct dvb_frontend *fe, u16 *snr) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 tmp; + unsigned int A, B; + /* report SNR in dB * 10 */ + + ret = cxd2820r_rd_reg(priv, 0x10019, &tmp); + if (ret) + goto error; + + if (((tmp >> 0) & 0x03) % 2) { + A = 875; + B = 650; + } else { + A = 950; + B = 760; + } + + ret = cxd2820r_rd_reg(priv, 0x1004d, &tmp); + if (ret) + goto error; + + #define CXD2820R_LOG2_E_24 24204406 /* log2(e) << 24 */ + if (tmp) + *snr = A * (intlog2(B / tmp) >> 5) / (CXD2820R_LOG2_E_24 >> 5) + / 10; + else + *snr = 0; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_ucblocks_c(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + /* no way to read ? */ + return 0; +} + +int cxd2820r_read_status_c(struct dvb_frontend *fe, fe_status_t *status) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + *status = 0; + + ret = cxd2820r_rd_regs(priv, 0x10088, buf, sizeof(buf)); + if (ret) + goto error; + + if (((buf[0] >> 0) & 0x01) == 1) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC; + + if (((buf[1] >> 3) & 0x01) == 1) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } + } + + dev_dbg(&priv->i2c->dev, "%s: lock=%02x %02x\n", __func__, buf[0], + buf[1]); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_init_c(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + ret = cxd2820r_wr_reg(priv, 0x00085, 0x07); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_sleep_c(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret, i; + struct reg_val_mask tab[] = { + { 0x000ff, 0x1f, 0xff }, + { 0x00085, 0x00, 0xff }, + { 0x00088, 0x01, 0xff }, + { 0x00081, 0x00, 0xff }, + { 0x00080, 0x00, 0xff }, + }; + + dev_dbg(&priv->i2c->dev, "%s\n", __func__); + + priv->delivery_system = SYS_UNDEFINED; + + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret) + goto error; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_get_tune_settings_c(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 500; + s->step_size = 0; /* no zigzag */ + s->max_drift = 0; + + return 0; +} diff --git a/drivers/media/dvb-frontends/cxd2820r_core.c b/drivers/media/dvb-frontends/cxd2820r_core.c new file mode 100644 index 00000000..03930d5e --- /dev/null +++ b/drivers/media/dvb-frontends/cxd2820r_core.c @@ -0,0 +1,776 @@ +/* + * Sony CXD2820R demodulator driver + * + * Copyright (C) 2010 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +#include "cxd2820r_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +/* write multiple registers */ +static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, + u8 *val, int len) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg[1] = { + { + .addr = i2c, + .flags = 0, + .len = len + 1, + .buf = buf, + } + }; + + if (1 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + buf[0] = reg; + memcpy(&buf[1], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple registers */ +static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, + u8 *val, int len) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg[2] = { + { + .addr = i2c, + .flags = 0, + .len = 1, + .buf = ®, + }, { + .addr = i2c, + .flags = I2C_M_RD, + .len = len, + .buf = buf, + } + }; + + if (len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + memcpy(val, buf, len); + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + + return ret; +} + +/* write multiple registers */ +int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, + int len) +{ + int ret; + u8 i2c_addr; + u8 reg = (reginfo >> 0) & 0xff; + u8 bank = (reginfo >> 8) & 0xff; + u8 i2c = (reginfo >> 16) & 0x01; + + /* select I2C */ + if (i2c) + i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */ + else + i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */ + + /* switch bank if needed */ + if (bank != priv->bank[i2c]) { + ret = cxd2820r_wr_regs_i2c(priv, i2c_addr, 0x00, &bank, 1); + if (ret) + return ret; + priv->bank[i2c] = bank; + } + return cxd2820r_wr_regs_i2c(priv, i2c_addr, reg, val, len); +} + +/* read multiple registers */ +int cxd2820r_rd_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, + int len) +{ + int ret; + u8 i2c_addr; + u8 reg = (reginfo >> 0) & 0xff; + u8 bank = (reginfo >> 8) & 0xff; + u8 i2c = (reginfo >> 16) & 0x01; + + /* select I2C */ + if (i2c) + i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */ + else + i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */ + + /* switch bank if needed */ + if (bank != priv->bank[i2c]) { + ret = cxd2820r_wr_regs_i2c(priv, i2c_addr, 0x00, &bank, 1); + if (ret) + return ret; + priv->bank[i2c] = bank; + } + return cxd2820r_rd_regs_i2c(priv, i2c_addr, reg, val, len); +} + +/* write single register */ +int cxd2820r_wr_reg(struct cxd2820r_priv *priv, u32 reg, u8 val) +{ + return cxd2820r_wr_regs(priv, reg, &val, 1); +} + +/* read single register */ +int cxd2820r_rd_reg(struct cxd2820r_priv *priv, u32 reg, u8 *val) +{ + return cxd2820r_rd_regs(priv, reg, val, 1); +} + +/* write single register with mask */ +int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val, + u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = cxd2820r_rd_reg(priv, reg, &tmp); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return cxd2820r_wr_reg(priv, reg, val); +} + +int cxd2820r_gpio(struct dvb_frontend *fe, u8 *gpio) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret, i; + u8 tmp0, tmp1; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + /* update GPIOs only when needed */ + if (!memcmp(gpio, priv->gpio, sizeof(priv->gpio))) + return 0; + + tmp0 = 0x00; + tmp1 = 0x00; + for (i = 0; i < sizeof(priv->gpio); i++) { + /* enable / disable */ + if (gpio[i] & CXD2820R_GPIO_E) + tmp0 |= (2 << 6) >> (2 * i); + else + tmp0 |= (1 << 6) >> (2 * i); + + /* input / output */ + if (gpio[i] & CXD2820R_GPIO_I) + tmp1 |= (1 << (3 + i)); + else + tmp1 |= (0 << (3 + i)); + + /* high / low */ + if (gpio[i] & CXD2820R_GPIO_H) + tmp1 |= (1 << (0 + i)); + else + tmp1 |= (0 << (0 + i)); + + dev_dbg(&priv->i2c->dev, "%s: gpio i=%d %02x %02x\n", __func__, + i, tmp0, tmp1); + } + + dev_dbg(&priv->i2c->dev, "%s: wr gpio=%02x %02x\n", __func__, tmp0, + tmp1); + + /* write bits [7:2] */ + ret = cxd2820r_wr_reg_mask(priv, 0x00089, tmp0, 0xfc); + if (ret) + goto error; + + /* write bits [5:0] */ + ret = cxd2820r_wr_reg_mask(priv, 0x0008e, tmp1, 0x3f); + if (ret) + goto error; + + memcpy(priv->gpio, gpio, sizeof(priv->gpio)); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +/* 64 bit div with round closest, like DIV_ROUND_CLOSEST but 64 bit */ +u32 cxd2820r_div_u64_round_closest(u64 dividend, u32 divisor) +{ + return div_u64(dividend + (divisor / 2), divisor); +} + +static int cxd2820r_set_frontend(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + switch (c->delivery_system) { + case SYS_DVBT: + ret = cxd2820r_init_t(fe); + if (ret < 0) + goto err; + ret = cxd2820r_set_frontend_t(fe); + if (ret < 0) + goto err; + break; + case SYS_DVBT2: + ret = cxd2820r_init_t(fe); + if (ret < 0) + goto err; + ret = cxd2820r_set_frontend_t2(fe); + if (ret < 0) + goto err; + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_init_c(fe); + if (ret < 0) + goto err; + ret = cxd2820r_set_frontend_c(fe); + if (ret < 0) + goto err; + break; + default: + dev_dbg(&priv->i2c->dev, "%s: error state=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + ret = -EINVAL; + break; + } +err: + return ret; +} +static int cxd2820r_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + switch (fe->dtv_property_cache.delivery_system) { + case SYS_DVBT: + ret = cxd2820r_read_status_t(fe, status); + break; + case SYS_DVBT2: + ret = cxd2820r_read_status_t2(fe, status); + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_read_status_c(fe, status); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int cxd2820r_get_frontend(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + if (priv->delivery_system == SYS_UNDEFINED) + return 0; + + switch (fe->dtv_property_cache.delivery_system) { + case SYS_DVBT: + ret = cxd2820r_get_frontend_t(fe); + break; + case SYS_DVBT2: + ret = cxd2820r_get_frontend_t2(fe); + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_get_frontend_c(fe); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int cxd2820r_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + switch (fe->dtv_property_cache.delivery_system) { + case SYS_DVBT: + ret = cxd2820r_read_ber_t(fe, ber); + break; + case SYS_DVBT2: + ret = cxd2820r_read_ber_t2(fe, ber); + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_read_ber_c(fe, ber); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int cxd2820r_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + switch (fe->dtv_property_cache.delivery_system) { + case SYS_DVBT: + ret = cxd2820r_read_signal_strength_t(fe, strength); + break; + case SYS_DVBT2: + ret = cxd2820r_read_signal_strength_t2(fe, strength); + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_read_signal_strength_c(fe, strength); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int cxd2820r_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + switch (fe->dtv_property_cache.delivery_system) { + case SYS_DVBT: + ret = cxd2820r_read_snr_t(fe, snr); + break; + case SYS_DVBT2: + ret = cxd2820r_read_snr_t2(fe, snr); + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_read_snr_c(fe, snr); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int cxd2820r_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + switch (fe->dtv_property_cache.delivery_system) { + case SYS_DVBT: + ret = cxd2820r_read_ucblocks_t(fe, ucblocks); + break; + case SYS_DVBT2: + ret = cxd2820r_read_ucblocks_t2(fe, ucblocks); + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_read_ucblocks_c(fe, ucblocks); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int cxd2820r_init(struct dvb_frontend *fe) +{ + return 0; +} + +static int cxd2820r_sleep(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + switch (fe->dtv_property_cache.delivery_system) { + case SYS_DVBT: + ret = cxd2820r_sleep_t(fe); + break; + case SYS_DVBT2: + ret = cxd2820r_sleep_t2(fe); + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_sleep_c(fe); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int cxd2820r_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + switch (fe->dtv_property_cache.delivery_system) { + case SYS_DVBT: + ret = cxd2820r_get_tune_settings_t(fe, s); + break; + case SYS_DVBT2: + ret = cxd2820r_get_tune_settings_t2(fe, s); + break; + case SYS_DVBC_ANNEX_A: + ret = cxd2820r_get_tune_settings_c(fe, s); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i; + fe_status_t status = 0; + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + + /* switch between DVB-T and DVB-T2 when tune fails */ + if (priv->last_tune_failed) { + if (priv->delivery_system == SYS_DVBT) { + ret = cxd2820r_sleep_t(fe); + if (ret) + goto error; + + c->delivery_system = SYS_DVBT2; + } else if (priv->delivery_system == SYS_DVBT2) { + ret = cxd2820r_sleep_t2(fe); + if (ret) + goto error; + + c->delivery_system = SYS_DVBT; + } + } + + /* set frontend */ + ret = cxd2820r_set_frontend(fe); + if (ret) + goto error; + + + /* frontend lock wait loop count */ + switch (priv->delivery_system) { + case SYS_DVBT: + case SYS_DVBC_ANNEX_A: + i = 20; + break; + case SYS_DVBT2: + i = 40; + break; + case SYS_UNDEFINED: + default: + i = 0; + break; + } + + /* wait frontend lock */ + for (; i > 0; i--) { + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); + msleep(50); + ret = cxd2820r_read_status(fe, &status); + if (ret) + goto error; + + if (status & FE_HAS_LOCK) + break; + } + + /* check if we have a valid signal */ + if (status & FE_HAS_LOCK) { + priv->last_tune_failed = 0; + return DVBFE_ALGO_SEARCH_SUCCESS; + } else { + priv->last_tune_failed = 1; + return DVBFE_ALGO_SEARCH_AGAIN; + } + +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return DVBFE_ALGO_SEARCH_ERROR; +} + +static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + +static void cxd2820r_release(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int uninitialized_var(ret); /* silence compiler warning */ + + dev_dbg(&priv->i2c->dev, "%s\n", __func__); + +#ifdef CONFIG_GPIOLIB + /* remove GPIOs */ + if (priv->gpio_chip.label) { + ret = gpiochip_remove(&priv->gpio_chip); + if (ret) + dev_err(&priv->i2c->dev, "%s: gpiochip_remove() " \ + "failed=%d\n", KBUILD_MODNAME, ret); + } +#endif + kfree(priv); + return; +} + +static int cxd2820r_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + + dev_dbg(&priv->i2c->dev, "%s: %d\n", __func__, enable); + + /* Bit 0 of reg 0xdb in bank 0x00 controls I2C repeater */ + return cxd2820r_wr_reg_mask(priv, 0xdb, enable ? 1 : 0, 0x1); +} + +#ifdef CONFIG_GPIOLIB +static int cxd2820r_gpio_direction_output(struct gpio_chip *chip, unsigned nr, + int val) +{ + struct cxd2820r_priv *priv = + container_of(chip, struct cxd2820r_priv, gpio_chip); + u8 gpio[GPIO_COUNT]; + + dev_dbg(&priv->i2c->dev, "%s: nr=%d val=%d\n", __func__, nr, val); + + memcpy(gpio, priv->gpio, sizeof(gpio)); + gpio[nr] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | (val << 2); + + return cxd2820r_gpio(&priv->fe, gpio); +} + +static void cxd2820r_gpio_set(struct gpio_chip *chip, unsigned nr, int val) +{ + struct cxd2820r_priv *priv = + container_of(chip, struct cxd2820r_priv, gpio_chip); + u8 gpio[GPIO_COUNT]; + + dev_dbg(&priv->i2c->dev, "%s: nr=%d val=%d\n", __func__, nr, val); + + memcpy(gpio, priv->gpio, sizeof(gpio)); + gpio[nr] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | (val << 2); + + (void) cxd2820r_gpio(&priv->fe, gpio); + + return; +} + +static int cxd2820r_gpio_get(struct gpio_chip *chip, unsigned nr) +{ + struct cxd2820r_priv *priv = + container_of(chip, struct cxd2820r_priv, gpio_chip); + + dev_dbg(&priv->i2c->dev, "%s: nr=%d\n", __func__, nr); + + return (priv->gpio[nr] >> 2) & 0x01; +} +#endif + +static const struct dvb_frontend_ops cxd2820r_ops = { + .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, + /* default: DVB-T/T2 */ + .info = { + .name = "Sony CXD2820R", + + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_MUTE_TS | + FE_CAN_2G_MODULATION | + FE_CAN_MULTISTREAM + }, + + .release = cxd2820r_release, + .init = cxd2820r_init, + .sleep = cxd2820r_sleep, + + .get_tune_settings = cxd2820r_get_tune_settings, + .i2c_gate_ctrl = cxd2820r_i2c_gate_ctrl, + + .get_frontend = cxd2820r_get_frontend, + + .get_frontend_algo = cxd2820r_get_frontend_algo, + .search = cxd2820r_search, + + .read_status = cxd2820r_read_status, + .read_snr = cxd2820r_read_snr, + .read_ber = cxd2820r_read_ber, + .read_ucblocks = cxd2820r_read_ucblocks, + .read_signal_strength = cxd2820r_read_signal_strength, +}; + +struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg, + struct i2c_adapter *i2c, int *gpio_chip_base +) +{ + struct cxd2820r_priv *priv; + int ret; + u8 tmp; + + priv = kzalloc(sizeof(struct cxd2820r_priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + dev_err(&i2c->dev, "%s: kzalloc() failed\n", + KBUILD_MODNAME); + goto error; + } + + priv->i2c = i2c; + memcpy(&priv->cfg, cfg, sizeof(struct cxd2820r_config)); + memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof(struct dvb_frontend_ops)); + priv->fe.demodulator_priv = priv; + + priv->bank[0] = priv->bank[1] = 0xff; + ret = cxd2820r_rd_reg(priv, 0x000fd, &tmp); + dev_dbg(&priv->i2c->dev, "%s: chip id=%02x\n", __func__, tmp); + if (ret || tmp != 0xe1) + goto error; + + if (gpio_chip_base) { +#ifdef CONFIG_GPIOLIB + /* add GPIOs */ + priv->gpio_chip.label = KBUILD_MODNAME; + priv->gpio_chip.dev = &priv->i2c->dev; + priv->gpio_chip.owner = THIS_MODULE; + priv->gpio_chip.direction_output = + cxd2820r_gpio_direction_output; + priv->gpio_chip.set = cxd2820r_gpio_set; + priv->gpio_chip.get = cxd2820r_gpio_get; + priv->gpio_chip.base = -1; /* dynamic allocation */ + priv->gpio_chip.ngpio = GPIO_COUNT; + priv->gpio_chip.can_sleep = 1; + ret = gpiochip_add(&priv->gpio_chip); + if (ret) + goto error; + + dev_dbg(&priv->i2c->dev, "%s: gpio_chip.base=%d\n", __func__, + priv->gpio_chip.base); + + *gpio_chip_base = priv->gpio_chip.base; +#else + /* + * Use static GPIO configuration if GPIOLIB is undefined. + * This is fallback condition. + */ + u8 gpio[GPIO_COUNT]; + gpio[0] = (*gpio_chip_base >> 0) & 0x07; + gpio[1] = (*gpio_chip_base >> 3) & 0x07; + gpio[2] = 0; + ret = cxd2820r_gpio(&priv->fe, gpio); + if (ret) + goto error; +#endif + } + + return &priv->fe; +error: + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(cxd2820r_attach); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Sony CXD2820R demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/cxd2820r_priv.h b/drivers/media/dvb-frontends/cxd2820r_priv.h new file mode 100644 index 00000000..7ff5f60c --- /dev/null +++ b/drivers/media/dvb-frontends/cxd2820r_priv.h @@ -0,0 +1,148 @@ +/* + * Sony CXD2820R demodulator driver + * + * Copyright (C) 2010 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +#ifndef CXD2820R_PRIV_H +#define CXD2820R_PRIV_H + +#include +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "cxd2820r.h" +#include + +struct reg_val_mask { + u32 reg; + u8 val; + u8 mask; +}; + +struct cxd2820r_priv { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct cxd2820r_config cfg; + + bool ber_running; + + u8 bank[2]; +#define GPIO_COUNT 3 + u8 gpio[GPIO_COUNT]; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio_chip; +#endif + + fe_delivery_system_t delivery_system; + bool last_tune_failed; /* for switch between T and T2 tune */ +}; + +/* cxd2820r_core.c */ + +extern int cxd2820r_debug; + +int cxd2820r_gpio(struct dvb_frontend *fe, u8 *gpio); + +int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val, + u8 mask); + +int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, + int len); + +u32 cxd2820r_div_u64_round_closest(u64 dividend, u32 divisor); + +int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, + int len); + +int cxd2820r_rd_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, + int len); + +int cxd2820r_wr_reg(struct cxd2820r_priv *priv, u32 reg, u8 val); + +int cxd2820r_rd_reg(struct cxd2820r_priv *priv, u32 reg, u8 *val); + +/* cxd2820r_c.c */ + +int cxd2820r_get_frontend_c(struct dvb_frontend *fe); + +int cxd2820r_set_frontend_c(struct dvb_frontend *fe); + +int cxd2820r_read_status_c(struct dvb_frontend *fe, fe_status_t *status); + +int cxd2820r_read_ber_c(struct dvb_frontend *fe, u32 *ber); + +int cxd2820r_read_signal_strength_c(struct dvb_frontend *fe, u16 *strength); + +int cxd2820r_read_snr_c(struct dvb_frontend *fe, u16 *snr); + +int cxd2820r_read_ucblocks_c(struct dvb_frontend *fe, u32 *ucblocks); + +int cxd2820r_init_c(struct dvb_frontend *fe); + +int cxd2820r_sleep_c(struct dvb_frontend *fe); + +int cxd2820r_get_tune_settings_c(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s); + +/* cxd2820r_t.c */ + +int cxd2820r_get_frontend_t(struct dvb_frontend *fe); + +int cxd2820r_set_frontend_t(struct dvb_frontend *fe); + +int cxd2820r_read_status_t(struct dvb_frontend *fe, fe_status_t *status); + +int cxd2820r_read_ber_t(struct dvb_frontend *fe, u32 *ber); + +int cxd2820r_read_signal_strength_t(struct dvb_frontend *fe, u16 *strength); + +int cxd2820r_read_snr_t(struct dvb_frontend *fe, u16 *snr); + +int cxd2820r_read_ucblocks_t(struct dvb_frontend *fe, u32 *ucblocks); + +int cxd2820r_init_t(struct dvb_frontend *fe); + +int cxd2820r_sleep_t(struct dvb_frontend *fe); + +int cxd2820r_get_tune_settings_t(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s); + +/* cxd2820r_t2.c */ + +int cxd2820r_get_frontend_t2(struct dvb_frontend *fe); + +int cxd2820r_set_frontend_t2(struct dvb_frontend *fe); + +int cxd2820r_read_status_t2(struct dvb_frontend *fe, fe_status_t *status); + +int cxd2820r_read_ber_t2(struct dvb_frontend *fe, u32 *ber); + +int cxd2820r_read_signal_strength_t2(struct dvb_frontend *fe, u16 *strength); + +int cxd2820r_read_snr_t2(struct dvb_frontend *fe, u16 *snr); + +int cxd2820r_read_ucblocks_t2(struct dvb_frontend *fe, u32 *ucblocks); + +int cxd2820r_init_t2(struct dvb_frontend *fe); + +int cxd2820r_sleep_t2(struct dvb_frontend *fe); + +int cxd2820r_get_tune_settings_t2(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s); + +#endif /* CXD2820R_PRIV_H */ diff --git a/drivers/media/dvb-frontends/cxd2820r_t.c b/drivers/media/dvb-frontends/cxd2820r_t.c new file mode 100644 index 00000000..fa184ca2 --- /dev/null +++ b/drivers/media/dvb-frontends/cxd2820r_t.c @@ -0,0 +1,449 @@ +/* + * Sony CXD2820R demodulator driver + * + * Copyright (C) 2010 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +#include "cxd2820r_priv.h" + +int cxd2820r_set_frontend_t(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i, bw_i; + u32 if_freq, if_ctl; + u64 num; + u8 buf[3], bw_param; + u8 bw_params1[][5] = { + { 0x17, 0xea, 0xaa, 0xaa, 0xaa }, /* 6 MHz */ + { 0x14, 0x80, 0x00, 0x00, 0x00 }, /* 7 MHz */ + { 0x11, 0xf0, 0x00, 0x00, 0x00 }, /* 8 MHz */ + }; + u8 bw_params2[][2] = { + { 0x1f, 0xdc }, /* 6 MHz */ + { 0x12, 0xf8 }, /* 7 MHz */ + { 0x01, 0xe0 }, /* 8 MHz */ + }; + struct reg_val_mask tab[] = { + { 0x00080, 0x00, 0xff }, + { 0x00081, 0x03, 0xff }, + { 0x00085, 0x07, 0xff }, + { 0x00088, 0x01, 0xff }, + + { 0x00070, priv->cfg.ts_mode, 0xff }, + { 0x000cb, priv->cfg.if_agc_polarity << 6, 0x40 }, + { 0x000a5, 0x00, 0x01 }, + { 0x00082, 0x20, 0x60 }, + { 0x000c2, 0xc3, 0xff }, + { 0x0016a, 0x50, 0xff }, + { 0x00427, 0x41, 0xff }, + }; + + dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", __func__, + c->frequency, c->bandwidth_hz); + + switch (c->bandwidth_hz) { + case 6000000: + bw_i = 0; + bw_param = 2; + break; + case 7000000: + bw_i = 1; + bw_param = 1; + break; + case 8000000: + bw_i = 2; + bw_param = 0; + break; + default: + return -EINVAL; + } + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + if (priv->delivery_system != SYS_DVBT) { + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, + tab[i].val, tab[i].mask); + if (ret) + goto error; + } + } + + priv->delivery_system = SYS_DVBT; + priv->ber_running = 0; /* tune stops BER counter */ + + /* program IF frequency */ + if (fe->ops.tuner_ops.get_if_frequency) { + ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); + if (ret) + goto error; + } else + if_freq = 0; + + dev_dbg(&priv->i2c->dev, "%s: if_freq=%d\n", __func__, if_freq); + + num = if_freq / 1000; /* Hz => kHz */ + num *= 0x1000000; + if_ctl = cxd2820r_div_u64_round_closest(num, 41000); + buf[0] = ((if_ctl >> 16) & 0xff); + buf[1] = ((if_ctl >> 8) & 0xff); + buf[2] = ((if_ctl >> 0) & 0xff); + + ret = cxd2820r_wr_regs(priv, 0x000b6, buf, 3); + if (ret) + goto error; + + ret = cxd2820r_wr_regs(priv, 0x0009f, bw_params1[bw_i], 5); + if (ret) + goto error; + + ret = cxd2820r_wr_reg_mask(priv, 0x000d7, bw_param << 6, 0xc0); + if (ret) + goto error; + + ret = cxd2820r_wr_regs(priv, 0x000d9, bw_params2[bw_i], 2); + if (ret) + goto error; + + ret = cxd2820r_wr_reg(priv, 0x000ff, 0x08); + if (ret) + goto error; + + ret = cxd2820r_wr_reg(priv, 0x000fe, 0x01); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_get_frontend_t(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + u8 buf[2]; + + ret = cxd2820r_rd_regs(priv, 0x0002f, buf, sizeof(buf)); + if (ret) + goto error; + + switch ((buf[0] >> 6) & 0x03) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + } + + switch ((buf[1] >> 1) & 0x03) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_8K; + break; + } + + switch ((buf[1] >> 3) & 0x03) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[0] >> 3) & 0x07) { + case 0: + c->hierarchy = HIERARCHY_NONE; + break; + case 1: + c->hierarchy = HIERARCHY_1; + break; + case 2: + c->hierarchy = HIERARCHY_2; + break; + case 3: + c->hierarchy = HIERARCHY_4; + break; + } + + switch ((buf[0] >> 0) & 0x07) { + case 0: + c->code_rate_HP = FEC_1_2; + break; + case 1: + c->code_rate_HP = FEC_2_3; + break; + case 2: + c->code_rate_HP = FEC_3_4; + break; + case 3: + c->code_rate_HP = FEC_5_6; + break; + case 4: + c->code_rate_HP = FEC_7_8; + break; + } + + switch ((buf[1] >> 5) & 0x07) { + case 0: + c->code_rate_LP = FEC_1_2; + break; + case 1: + c->code_rate_LP = FEC_2_3; + break; + case 2: + c->code_rate_LP = FEC_3_4; + break; + case 3: + c->code_rate_LP = FEC_5_6; + break; + case 4: + c->code_rate_LP = FEC_7_8; + break; + } + + ret = cxd2820r_rd_reg(priv, 0x007c6, &buf[0]); + if (ret) + goto error; + + switch ((buf[0] >> 0) & 0x01) { + case 0: + c->inversion = INVERSION_OFF; + break; + case 1: + c->inversion = INVERSION_ON; + break; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_ber_t(struct dvb_frontend *fe, u32 *ber) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[3], start_ber = 0; + *ber = 0; + + if (priv->ber_running) { + ret = cxd2820r_rd_regs(priv, 0x00076, buf, sizeof(buf)); + if (ret) + goto error; + + if ((buf[2] >> 7) & 0x01 || (buf[2] >> 4) & 0x01) { + *ber = (buf[2] & 0x0f) << 16 | buf[1] << 8 | buf[0]; + start_ber = 1; + } + } else { + priv->ber_running = 1; + start_ber = 1; + } + + if (start_ber) { + /* (re)start BER */ + ret = cxd2820r_wr_reg(priv, 0x00079, 0x01); + if (ret) + goto error; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_signal_strength_t(struct dvb_frontend *fe, + u16 *strength) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + u16 tmp; + + ret = cxd2820r_rd_regs(priv, 0x00026, buf, sizeof(buf)); + if (ret) + goto error; + + tmp = (buf[0] & 0x0f) << 8 | buf[1]; + tmp = ~tmp & 0x0fff; + + /* scale value to 0x0000-0xffff from 0x0000-0x0fff */ + *strength = tmp * 0xffff / 0x0fff; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_snr_t(struct dvb_frontend *fe, u16 *snr) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + u16 tmp; + /* report SNR in dB * 10 */ + + ret = cxd2820r_rd_regs(priv, 0x00028, buf, sizeof(buf)); + if (ret) + goto error; + + tmp = (buf[0] & 0x1f) << 8 | buf[1]; + #define CXD2820R_LOG10_8_24 15151336 /* log10(8) << 24 */ + if (tmp) + *snr = (intlog10(tmp) - CXD2820R_LOG10_8_24) / ((1 << 24) + / 100); + else + *snr = 0; + + dev_dbg(&priv->i2c->dev, "%s: dBx10=%d val=%04x\n", __func__, *snr, + tmp); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_ucblocks_t(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + /* no way to read ? */ + return 0; +} + +int cxd2820r_read_status_t(struct dvb_frontend *fe, fe_status_t *status) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[4]; + *status = 0; + + ret = cxd2820r_rd_reg(priv, 0x00010, &buf[0]); + if (ret) + goto error; + + if ((buf[0] & 0x07) == 6) { + ret = cxd2820r_rd_reg(priv, 0x00073, &buf[1]); + if (ret) + goto error; + + if (((buf[1] >> 3) & 0x01) == 1) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } else { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC; + } + } else { + ret = cxd2820r_rd_reg(priv, 0x00014, &buf[2]); + if (ret) + goto error; + + if ((buf[2] & 0x0f) >= 4) { + ret = cxd2820r_rd_reg(priv, 0x00a14, &buf[3]); + if (ret) + goto error; + + if (((buf[3] >> 4) & 0x01) == 1) + *status |= FE_HAS_SIGNAL; + } + } + + dev_dbg(&priv->i2c->dev, "%s: lock=%*ph\n", __func__, 4, buf); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_init_t(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + + ret = cxd2820r_wr_reg(priv, 0x00085, 0x07); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_sleep_t(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret, i; + struct reg_val_mask tab[] = { + { 0x000ff, 0x1f, 0xff }, + { 0x00085, 0x00, 0xff }, + { 0x00088, 0x01, 0xff }, + { 0x00081, 0x00, 0xff }, + { 0x00080, 0x00, 0xff }, + }; + + dev_dbg(&priv->i2c->dev, "%s\n", __func__); + + priv->delivery_system = SYS_UNDEFINED; + + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret) + goto error; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_get_tune_settings_t(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 500; + s->step_size = fe->ops.info.frequency_stepsize * 2; + s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; + + return 0; +} diff --git a/drivers/media/dvb-frontends/cxd2820r_t2.c b/drivers/media/dvb-frontends/cxd2820r_t2.c new file mode 100644 index 00000000..2ba130e2 --- /dev/null +++ b/drivers/media/dvb-frontends/cxd2820r_t2.c @@ -0,0 +1,440 @@ +/* + * Sony CXD2820R demodulator driver + * + * Copyright (C) 2010 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +#include "cxd2820r_priv.h" + +int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i, bw_i; + u32 if_freq, if_ctl; + u64 num; + u8 buf[3], bw_param; + u8 bw_params1[][5] = { + { 0x1c, 0xb3, 0x33, 0x33, 0x33 }, /* 5 MHz */ + { 0x17, 0xea, 0xaa, 0xaa, 0xaa }, /* 6 MHz */ + { 0x14, 0x80, 0x00, 0x00, 0x00 }, /* 7 MHz */ + { 0x11, 0xf0, 0x00, 0x00, 0x00 }, /* 8 MHz */ + }; + struct reg_val_mask tab[] = { + { 0x00080, 0x02, 0xff }, + { 0x00081, 0x20, 0xff }, + { 0x00085, 0x07, 0xff }, + { 0x00088, 0x01, 0xff }, + { 0x02069, 0x01, 0xff }, + + { 0x0207f, 0x2a, 0xff }, + { 0x02082, 0x0a, 0xff }, + { 0x02083, 0x0a, 0xff }, + { 0x020cb, priv->cfg.if_agc_polarity << 6, 0x40 }, + { 0x02070, priv->cfg.ts_mode, 0xff }, + { 0x020b5, priv->cfg.spec_inv << 4, 0x10 }, + { 0x02567, 0x07, 0x0f }, + { 0x02569, 0x03, 0x03 }, + { 0x02595, 0x1a, 0xff }, + { 0x02596, 0x50, 0xff }, + { 0x02a8c, 0x00, 0xff }, + { 0x02a8d, 0x34, 0xff }, + { 0x02a45, 0x06, 0x07 }, + { 0x03f10, 0x0d, 0xff }, + { 0x03f11, 0x02, 0xff }, + { 0x03f12, 0x01, 0xff }, + { 0x03f23, 0x2c, 0xff }, + { 0x03f51, 0x13, 0xff }, + { 0x03f52, 0x01, 0xff }, + { 0x03f53, 0x00, 0xff }, + { 0x027e6, 0x14, 0xff }, + { 0x02786, 0x02, 0x07 }, + { 0x02787, 0x40, 0xe0 }, + { 0x027ef, 0x10, 0x18 }, + }; + + dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", __func__, + c->frequency, c->bandwidth_hz); + + switch (c->bandwidth_hz) { + case 5000000: + bw_i = 0; + bw_param = 3; + break; + case 6000000: + bw_i = 1; + bw_param = 2; + break; + case 7000000: + bw_i = 2; + bw_param = 1; + break; + case 8000000: + bw_i = 3; + bw_param = 0; + break; + default: + return -EINVAL; + } + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + if (priv->delivery_system != SYS_DVBT2) { + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, + tab[i].val, tab[i].mask); + if (ret) + goto error; + } + } + + priv->delivery_system = SYS_DVBT2; + + /* program IF frequency */ + if (fe->ops.tuner_ops.get_if_frequency) { + ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); + if (ret) + goto error; + } else + if_freq = 0; + + dev_dbg(&priv->i2c->dev, "%s: if_freq=%d\n", __func__, if_freq); + + num = if_freq / 1000; /* Hz => kHz */ + num *= 0x1000000; + if_ctl = cxd2820r_div_u64_round_closest(num, 41000); + buf[0] = ((if_ctl >> 16) & 0xff); + buf[1] = ((if_ctl >> 8) & 0xff); + buf[2] = ((if_ctl >> 0) & 0xff); + + /* PLP filtering */ + if (c->stream_id > 255) { + dev_dbg(&priv->i2c->dev, "%s: Disable PLP filtering\n", __func__); + ret = cxd2820r_wr_reg(priv, 0x023ad , 0); + if (ret) + goto error; + } else { + dev_dbg(&priv->i2c->dev, "%s: Enable PLP filtering = %d\n", __func__, + c->stream_id); + ret = cxd2820r_wr_reg(priv, 0x023af , c->stream_id & 0xFF); + if (ret) + goto error; + ret = cxd2820r_wr_reg(priv, 0x023ad , 1); + if (ret) + goto error; + } + + ret = cxd2820r_wr_regs(priv, 0x020b6, buf, 3); + if (ret) + goto error; + + ret = cxd2820r_wr_regs(priv, 0x0209f, bw_params1[bw_i], 5); + if (ret) + goto error; + + ret = cxd2820r_wr_reg_mask(priv, 0x020d7, bw_param << 6, 0xc0); + if (ret) + goto error; + + ret = cxd2820r_wr_reg(priv, 0x000ff, 0x08); + if (ret) + goto error; + + ret = cxd2820r_wr_reg(priv, 0x000fe, 0x01); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; + +} + +int cxd2820r_get_frontend_t2(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + u8 buf[2]; + + ret = cxd2820r_rd_regs(priv, 0x0205c, buf, 2); + if (ret) + goto error; + + switch ((buf[0] >> 0) & 0x07) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_8K; + break; + case 2: + c->transmission_mode = TRANSMISSION_MODE_4K; + break; + case 3: + c->transmission_mode = TRANSMISSION_MODE_1K; + break; + case 4: + c->transmission_mode = TRANSMISSION_MODE_16K; + break; + case 5: + c->transmission_mode = TRANSMISSION_MODE_32K; + break; + } + + switch ((buf[1] >> 4) & 0x07) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + case 4: + c->guard_interval = GUARD_INTERVAL_1_128; + break; + case 5: + c->guard_interval = GUARD_INTERVAL_19_128; + break; + case 6: + c->guard_interval = GUARD_INTERVAL_19_256; + break; + } + + ret = cxd2820r_rd_regs(priv, 0x0225b, buf, 2); + if (ret) + goto error; + + switch ((buf[0] >> 0) & 0x07) { + case 0: + c->fec_inner = FEC_1_2; + break; + case 1: + c->fec_inner = FEC_3_5; + break; + case 2: + c->fec_inner = FEC_2_3; + break; + case 3: + c->fec_inner = FEC_3_4; + break; + case 4: + c->fec_inner = FEC_4_5; + break; + case 5: + c->fec_inner = FEC_5_6; + break; + } + + switch ((buf[1] >> 0) & 0x07) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + case 3: + c->modulation = QAM_256; + break; + } + + ret = cxd2820r_rd_reg(priv, 0x020b5, &buf[0]); + if (ret) + goto error; + + switch ((buf[0] >> 4) & 0x01) { + case 0: + c->inversion = INVERSION_OFF; + break; + case 1: + c->inversion = INVERSION_ON; + break; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_status_t2(struct dvb_frontend *fe, fe_status_t *status) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[1]; + *status = 0; + + ret = cxd2820r_rd_reg(priv, 0x02010 , &buf[0]); + if (ret) + goto error; + + if ((buf[0] & 0x07) == 6) { + if (((buf[0] >> 5) & 0x01) == 1) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } else { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC; + } + } + + dev_dbg(&priv->i2c->dev, "%s: lock=%02x\n", __func__, buf[0]); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_ber_t2(struct dvb_frontend *fe, u32 *ber) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[4]; + unsigned int errbits; + *ber = 0; + /* FIXME: correct calculation */ + + ret = cxd2820r_rd_regs(priv, 0x02039, buf, sizeof(buf)); + if (ret) + goto error; + + if ((buf[0] >> 4) & 0x01) { + errbits = (buf[0] & 0x0f) << 24 | buf[1] << 16 | + buf[2] << 8 | buf[3]; + + if (errbits) + *ber = errbits * 64 / 16588800; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_signal_strength_t2(struct dvb_frontend *fe, + u16 *strength) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + u16 tmp; + + ret = cxd2820r_rd_regs(priv, 0x02026, buf, sizeof(buf)); + if (ret) + goto error; + + tmp = (buf[0] & 0x0f) << 8 | buf[1]; + tmp = ~tmp & 0x0fff; + + /* scale value to 0x0000-0xffff from 0x0000-0x0fff */ + *strength = tmp * 0xffff / 0x0fff; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_snr_t2(struct dvb_frontend *fe, u16 *snr) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + u16 tmp; + /* report SNR in dB * 10 */ + + ret = cxd2820r_rd_regs(priv, 0x02028, buf, sizeof(buf)); + if (ret) + goto error; + + tmp = (buf[0] & 0x0f) << 8 | buf[1]; + #define CXD2820R_LOG10_8_24 15151336 /* log10(8) << 24 */ + if (tmp) + *snr = (intlog10(tmp) - CXD2820R_LOG10_8_24) / ((1 << 24) + / 100); + else + *snr = 0; + + dev_dbg(&priv->i2c->dev, "%s: dBx10=%d val=%04x\n", __func__, *snr, + tmp); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_read_ucblocks_t2(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + /* no way to read ? */ + return 0; +} + +int cxd2820r_sleep_t2(struct dvb_frontend *fe) +{ + struct cxd2820r_priv *priv = fe->demodulator_priv; + int ret, i; + struct reg_val_mask tab[] = { + { 0x000ff, 0x1f, 0xff }, + { 0x00085, 0x00, 0xff }, + { 0x00088, 0x01, 0xff }, + { 0x02069, 0x00, 0xff }, + { 0x00081, 0x00, 0xff }, + { 0x00080, 0x00, 0xff }, + }; + + dev_dbg(&priv->i2c->dev, "%s\n", __func__); + + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret) + goto error; + } + + priv->delivery_system = SYS_UNDEFINED; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int cxd2820r_get_tune_settings_t2(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 1500; + s->step_size = fe->ops.info.frequency_stepsize * 2; + s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; + + return 0; +} diff --git a/drivers/media/dvb-frontends/dib0070.c b/drivers/media/dvb-frontends/dib0070.c new file mode 100644 index 00000000..3b024bfe --- /dev/null +++ b/drivers/media/dvb-frontends/dib0070.c @@ -0,0 +1,780 @@ +/* + * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner. + * + * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * This code is more or less generated from another driver, please + * excuse some codingstyle oddities. + * + */ + +#include +#include +#include +#include + +#include "dvb_frontend.h" + +#include "dib0070.h" +#include "dibx000_common.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { \ + if (debug) { \ + printk(KERN_DEBUG "DiB0070: "); \ + printk(args); \ + printk("\n"); \ + } \ +} while (0) + +#define DIB0070_P1D 0x00 +#define DIB0070_P1F 0x01 +#define DIB0070_P1G 0x03 +#define DIB0070S_P1A 0x02 + +struct dib0070_state { + struct i2c_adapter *i2c; + struct dvb_frontend *fe; + const struct dib0070_config *cfg; + u16 wbd_ff_offset; + u8 revision; + + enum frontend_tune_state tune_state; + u32 current_rf; + + /* for the captrim binary search */ + s8 step; + u16 adc_diff; + + s8 captrim; + s8 fcaptrim; + u16 lo4; + + const struct dib0070_tuning *current_tune_table_index; + const struct dib0070_lna_match *lna_match; + + u8 wbd_gain_current; + u16 wbd_offset_3_3[2]; + + /* for the I2C transfer */ + struct i2c_msg msg[2]; + u8 i2c_write_buffer[3]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; +}; + +static u16 dib0070_read_reg(struct dib0070_state *state, u8 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + state->i2c_write_buffer[0] = reg; + + memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); + state->msg[0].addr = state->cfg->i2c_address; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 1; + state->msg[1].addr = state->cfg->i2c_address; + state->msg[1].flags = I2C_M_RD; + state->msg[1].buf = state->i2c_read_buffer; + state->msg[1].len = 2; + + if (i2c_transfer(state->i2c, state->msg, 2) != 2) { + printk(KERN_WARNING "DiB0070 I2C read failed\n"); + ret = 0; + } else + ret = (state->i2c_read_buffer[0] << 8) + | state->i2c_read_buffer[1]; + + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} + +static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + state->i2c_write_buffer[0] = reg; + state->i2c_write_buffer[1] = val >> 8; + state->i2c_write_buffer[2] = val & 0xff; + + memset(state->msg, 0, sizeof(struct i2c_msg)); + state->msg[0].addr = state->cfg->i2c_address; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 3; + + if (i2c_transfer(state->i2c, state->msg, 1) != 1) { + printk(KERN_WARNING "DiB0070 I2C write failed\n"); + ret = -EREMOTEIO; + } else + ret = 0; + + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} + +#define HARD_RESET(state) do { \ + state->cfg->sleep(state->fe, 0); \ + if (state->cfg->reset) { \ + state->cfg->reset(state->fe,1); msleep(10); \ + state->cfg->reset(state->fe,0); msleep(10); \ + } \ +} while (0) + +static int dib0070_set_bandwidth(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + u16 tmp = dib0070_read_reg(state, 0x02) & 0x3fff; + + if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 7000) + tmp |= (0 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 6000) + tmp |= (1 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 5000) + tmp |= (2 << 14); + else + tmp |= (3 << 14); + + dib0070_write_reg(state, 0x02, tmp); + + /* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */ + if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) { + u16 value = dib0070_read_reg(state, 0x17); + + dib0070_write_reg(state, 0x17, value & 0xfffc); + tmp = dib0070_read_reg(state, 0x01) & 0x01ff; + dib0070_write_reg(state, 0x01, tmp | (60 << 9)); + + dib0070_write_reg(state, 0x17, value); + } + return 0; +} + +static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state *tune_state) +{ + int8_t step_sign; + u16 adc; + int ret = 0; + + if (*tune_state == CT_TUNER_STEP_0) { + + dib0070_write_reg(state, 0x0f, 0xed10); + dib0070_write_reg(state, 0x17, 0x0034); + + dib0070_write_reg(state, 0x18, 0x0032); + state->step = state->captrim = state->fcaptrim = 64; + state->adc_diff = 3000; + ret = 20; + + *tune_state = CT_TUNER_STEP_1; + } else if (*tune_state == CT_TUNER_STEP_1) { + state->step /= 2; + dib0070_write_reg(state, 0x14, state->lo4 | state->captrim); + ret = 15; + + *tune_state = CT_TUNER_STEP_2; + } else if (*tune_state == CT_TUNER_STEP_2) { + + adc = dib0070_read_reg(state, 0x19); + + dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", state->captrim, adc, (u32) adc*(u32)1800/(u32)1024); + + if (adc >= 400) { + adc -= 400; + step_sign = -1; + } else { + adc = 400 - adc; + step_sign = 1; + } + + if (adc < state->adc_diff) { + dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)", state->captrim, adc, state->adc_diff); + state->adc_diff = adc; + state->fcaptrim = state->captrim; + + + + } + state->captrim += (step_sign * state->step); + + if (state->step >= 1) + *tune_state = CT_TUNER_STEP_1; + else + *tune_state = CT_TUNER_STEP_3; + + } else if (*tune_state == CT_TUNER_STEP_3) { + dib0070_write_reg(state, 0x14, state->lo4 | state->fcaptrim); + dib0070_write_reg(state, 0x18, 0x07ff); + *tune_state = CT_TUNER_STEP_4; + } + + return ret; +} + +static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt) +{ + struct dib0070_state *state = fe->tuner_priv; + u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0); + dprintk("CTRL_LO5: 0x%x", lo5); + return dib0070_write_reg(state, 0x15, lo5); +} + +void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) +{ + struct dib0070_state *state = fe->tuner_priv; + + if (open) { + dib0070_write_reg(state, 0x1b, 0xff00); + dib0070_write_reg(state, 0x1a, 0x0000); + } else { + dib0070_write_reg(state, 0x1b, 0x4112); + if (state->cfg->vga_filter != 0) { + dib0070_write_reg(state, 0x1a, state->cfg->vga_filter); + dprintk("vga filter register is set to %x", state->cfg->vga_filter); + } else + dib0070_write_reg(state, 0x1a, 0x0009); + } +} + +EXPORT_SYMBOL(dib0070_ctrl_agc_filter); +struct dib0070_tuning { + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 switch_trim; + u8 vco_band; + u8 hfdiv; + u8 vco_multi; + u8 presc; + u8 wbdmux; + u16 tuner_enable; +}; + +struct dib0070_lna_match { + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 lna_band; +}; + +static const struct dib0070_tuning dib0070s_tuning_table[] = { + { 570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800 }, /* UHF */ + { 700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800 }, + { 863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800 }, + { 1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND */ + { 1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, + { 2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, + { 0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000 }, /* SBAND */ +}; + +static const struct dib0070_tuning dib0070_tuning_table[] = { + { 115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000 }, /* FM below 92MHz cannot be tuned */ + { 179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000 }, /* VHF */ + { 189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000 }, + { 250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000 }, + { 569999, 2, 1, 5, 6, 2, 2, 0x4000 | 0x0800 }, /* UHF */ + { 699999, 2, 0, 1, 4, 2, 2, 0x4000 | 0x0800 }, + { 863999, 2, 1, 1, 4, 2, 2, 0x4000 | 0x0800 }, + { 0xffffffff, 0, 1, 0, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND or everything higher than UHF */ +}; + +static const struct dib0070_lna_match dib0070_lna_flip_chip[] = { + { 180000, 0 }, /* VHF */ + { 188000, 1 }, + { 196400, 2 }, + { 250000, 3 }, + { 550000, 0 }, /* UHF */ + { 590000, 1 }, + { 666000, 3 }, + { 864000, 5 }, + { 1500000, 0 }, /* LBAND or everything higher than UHF */ + { 1600000, 1 }, + { 2000000, 3 }, + { 0xffffffff, 7 }, +}; + +static const struct dib0070_lna_match dib0070_lna[] = { + { 180000, 0 }, /* VHF */ + { 188000, 1 }, + { 196400, 2 }, + { 250000, 3 }, + { 550000, 2 }, /* UHF */ + { 650000, 3 }, + { 750000, 5 }, + { 850000, 6 }, + { 864000, 7 }, + { 1500000, 0 }, /* LBAND or everything higher than UHF */ + { 1600000, 1 }, + { 2000000, 3 }, + { 0xffffffff, 7 }, +}; + +#define LPF 100 +static int dib0070_tune_digital(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + + const struct dib0070_tuning *tune; + const struct dib0070_lna_match *lna_match; + + enum frontend_tune_state *tune_state = &state->tune_state; + int ret = 10; /* 1ms is the default delay most of the time */ + + u8 band = (u8)BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency/1000); + u32 freq = fe->dtv_property_cache.frequency/1000 + (band == BAND_VHF ? state->cfg->freq_offset_khz_vhf : state->cfg->freq_offset_khz_uhf); + +#ifdef CONFIG_SYS_ISDBT + if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1) + if (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) + && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))) + || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) + && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == (state->fe->dtv_property_cache.isdbt_sb_segment_count / 2))) + || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) + && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))) + freq += 850; +#endif + if (state->current_rf != freq) { + + switch (state->revision) { + case DIB0070S_P1A: + tune = dib0070s_tuning_table; + lna_match = dib0070_lna; + break; + default: + tune = dib0070_tuning_table; + if (state->cfg->flip_chip) + lna_match = dib0070_lna_flip_chip; + else + lna_match = dib0070_lna; + break; + } + while (freq > tune->max_freq) /* find the right one */ + tune++; + while (freq > lna_match->max_freq) /* find the right one */ + lna_match++; + + state->current_tune_table_index = tune; + state->lna_match = lna_match; + } + + if (*tune_state == CT_TUNER_START) { + dprintk("Tuning for Band: %hd (%d kHz)", band, freq); + if (state->current_rf != freq) { + u8 REFDIV; + u32 FBDiv, Rest, FREF, VCOF_kHz; + u8 Den; + + state->current_rf = freq; + state->lo4 = (state->current_tune_table_index->vco_band << 11) | (state->current_tune_table_index->hfdiv << 7); + + + dib0070_write_reg(state, 0x17, 0x30); + + + VCOF_kHz = state->current_tune_table_index->vco_multi * freq * 2; + + switch (band) { + case BAND_VHF: + REFDIV = (u8) ((state->cfg->clock_khz + 9999) / 10000); + break; + case BAND_FM: + REFDIV = (u8) ((state->cfg->clock_khz) / 1000); + break; + default: + REFDIV = (u8) (state->cfg->clock_khz / 10000); + break; + } + FREF = state->cfg->clock_khz / REFDIV; + + + + switch (state->revision) { + case DIB0070S_P1A: + FBDiv = (VCOF_kHz / state->current_tune_table_index->presc / FREF); + Rest = (VCOF_kHz / state->current_tune_table_index->presc) - FBDiv * FREF; + break; + + case DIB0070_P1G: + case DIB0070_P1F: + default: + FBDiv = (freq / (FREF / 2)); + Rest = 2 * freq - FBDiv * FREF; + break; + } + + if (Rest < LPF) + Rest = 0; + else if (Rest < 2 * LPF) + Rest = 2 * LPF; + else if (Rest > (FREF - LPF)) { + Rest = 0; + FBDiv += 1; + } else if (Rest > (FREF - 2 * LPF)) + Rest = FREF - 2 * LPF; + Rest = (Rest * 6528) / (FREF / 10); + + Den = 1; + if (Rest > 0) { + state->lo4 |= (1 << 14) | (1 << 12); + Den = 255; + } + + + dib0070_write_reg(state, 0x11, (u16)FBDiv); + dib0070_write_reg(state, 0x12, (Den << 8) | REFDIV); + dib0070_write_reg(state, 0x13, (u16) Rest); + + if (state->revision == DIB0070S_P1A) { + + if (band == BAND_SBAND) { + dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); + dib0070_write_reg(state, 0x1d, 0xFFFF); + } else + dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1); + } + + dib0070_write_reg(state, 0x20, + 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | state->current_tune_table_index->tuner_enable); + + dprintk("REFDIV: %hd, FREF: %d", REFDIV, FREF); + dprintk("FBDIV: %d, Rest: %d", FBDiv, Rest); + dprintk("Num: %hd, Den: %hd, SD: %hd", (u16) Rest, Den, (state->lo4 >> 12) & 0x1); + dprintk("HFDIV code: %hd", state->current_tune_table_index->hfdiv); + dprintk("VCO = %hd", state->current_tune_table_index->vco_band); + dprintk("VCOF: ((%hd*%d) << 1))", state->current_tune_table_index->vco_multi, freq); + + *tune_state = CT_TUNER_STEP_0; + } else { /* we are already tuned to this frequency - the configuration is correct */ + ret = 50; /* wakeup time */ + *tune_state = CT_TUNER_STEP_5; + } + } else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) { + + ret = dib0070_captrim(state, tune_state); + + } else if (*tune_state == CT_TUNER_STEP_4) { + const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; + if (tmp != NULL) { + while (freq/1000 > tmp->freq) /* find the right one */ + tmp++; + dib0070_write_reg(state, 0x0f, + (0 << 15) | (1 << 14) | (3 << 12) + | (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7) + | (state->current_tune_table_index->wbdmux << 0)); + state->wbd_gain_current = tmp->wbd_gain_val; + } else { + dib0070_write_reg(state, 0x0f, + (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (state->current_tune_table_index-> + wbdmux << 0)); + state->wbd_gain_current = 6; + } + + dib0070_write_reg(state, 0x06, 0x3fff); + dib0070_write_reg(state, 0x07, + (state->current_tune_table_index->switch_trim << 11) | (7 << 8) | (state->lna_match->lna_band << 3) | (3 << 0)); + dib0070_write_reg(state, 0x08, (state->lna_match->lna_band << 10) | (3 << 7) | (127)); + dib0070_write_reg(state, 0x0d, 0x0d80); + + + dib0070_write_reg(state, 0x18, 0x07ff); + dib0070_write_reg(state, 0x17, 0x0033); + + + *tune_state = CT_TUNER_STEP_5; + } else if (*tune_state == CT_TUNER_STEP_5) { + dib0070_set_bandwidth(fe); + *tune_state = CT_TUNER_STOP; + } else { + ret = FE_CALLBACK_TIME_NEVER; /* tuner finished, time to call again infinite */ + } + return ret; +} + + +static int dib0070_tune(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + uint32_t ret; + + state->tune_state = CT_TUNER_START; + + do { + ret = dib0070_tune_digital(fe); + if (ret != FE_CALLBACK_TIME_NEVER) + msleep(ret/10); + else + break; + } while (state->tune_state != CT_TUNER_STOP); + + return 0; +} + +static int dib0070_wakeup(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + if (state->cfg->sleep) + state->cfg->sleep(fe, 0); + return 0; +} + +static int dib0070_sleep(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + if (state->cfg->sleep) + state->cfg->sleep(fe, 1); + return 0; +} + +u8 dib0070_get_rf_output(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + return (dib0070_read_reg(state, 0x07) >> 11) & 0x3; +} +EXPORT_SYMBOL(dib0070_get_rf_output); + +int dib0070_set_rf_output(struct dvb_frontend *fe, u8 no) +{ + struct dib0070_state *state = fe->tuner_priv; + u16 rxrf2 = dib0070_read_reg(state, 0x07) & 0xfe7ff; + if (no > 3) + no = 3; + if (no < 1) + no = 1; + return dib0070_write_reg(state, 0x07, rxrf2 | (no << 11)); +} +EXPORT_SYMBOL(dib0070_set_rf_output); + +static const u16 dib0070_p1f_defaults[] = + +{ + 7, 0x02, + 0x0008, + 0x0000, + 0x0000, + 0x0000, + 0x0000, + 0x0002, + 0x0100, + + 3, 0x0d, + 0x0d80, + 0x0001, + 0x0000, + + 4, 0x11, + 0x0000, + 0x0103, + 0x0000, + 0x0000, + + 3, 0x16, + 0x0004 | 0x0040, + 0x0030, + 0x07ff, + + 6, 0x1b, + 0x4112, + 0xff00, + 0xc07f, + 0x0000, + 0x0180, + 0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001, + + 0, +}; + +static u16 dib0070_read_wbd_offset(struct dib0070_state *state, u8 gain) +{ + u16 tuner_en = dib0070_read_reg(state, 0x20); + u16 offset; + + dib0070_write_reg(state, 0x18, 0x07ff); + dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001); + dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0)); + msleep(9); + offset = dib0070_read_reg(state, 0x19); + dib0070_write_reg(state, 0x20, tuner_en); + return offset; +} + +static void dib0070_wbd_offset_calibration(struct dib0070_state *state) +{ + u8 gain; + for (gain = 6; gain < 8; gain++) { + state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2); + dprintk("Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain-6]); + } +} + +u16 dib0070_wbd_offset(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; + u32 freq = fe->dtv_property_cache.frequency/1000; + + if (tmp != NULL) { + while (freq/1000 > tmp->freq) /* find the right one */ + tmp++; + state->wbd_gain_current = tmp->wbd_gain_val; + } else + state->wbd_gain_current = 6; + + return state->wbd_offset_3_3[state->wbd_gain_current - 6]; +} +EXPORT_SYMBOL(dib0070_wbd_offset); + +#define pgm_read_word(w) (*w) +static int dib0070_reset(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + u16 l, r, *n; + + HARD_RESET(state); + + +#ifndef FORCE_SBAND_TUNER + if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1) + state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff; + else +#else +#warning forcing SBAND +#endif + state->revision = DIB0070S_P1A; + + /* P1F or not */ + dprintk("Revision: %x", state->revision); + + if (state->revision == DIB0070_P1D) { + dprintk("Error: this driver is not to be used meant for P1D or earlier"); + return -EINVAL; + } + + n = (u16 *) dib0070_p1f_defaults; + l = pgm_read_word(n++); + while (l) { + r = pgm_read_word(n++); + do { + dib0070_write_reg(state, (u8)r, pgm_read_word(n++)); + r++; + } while (--l); + l = pgm_read_word(n++); + } + + if (state->cfg->force_crystal_mode != 0) + r = state->cfg->force_crystal_mode; + else if (state->cfg->clock_khz >= 24000) + r = 1; + else + r = 2; + + + r |= state->cfg->osc_buffer_state << 3; + + dib0070_write_reg(state, 0x10, r); + dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 5)); + + if (state->cfg->invert_iq) { + r = dib0070_read_reg(state, 0x02) & 0xffdf; + dib0070_write_reg(state, 0x02, r | (1 << 5)); + } + + if (state->revision == DIB0070S_P1A) + dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); + else + dib0070_set_ctrl_lo5(fe, 5, 4, state->cfg->charge_pump, state->cfg->enable_third_order_filter); + + dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8); + + dib0070_wbd_offset_calibration(state); + + return 0; +} + +static int dib0070_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct dib0070_state *state = fe->tuner_priv; + + *frequency = 1000 * state->current_rf; + return 0; +} + +static int dib0070_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static const struct dvb_tuner_ops dib0070_ops = { + .info = { + .name = "DiBcom DiB0070", + .frequency_min = 45000000, + .frequency_max = 860000000, + .frequency_step = 1000, + }, + .release = dib0070_release, + + .init = dib0070_wakeup, + .sleep = dib0070_sleep, + .set_params = dib0070_tune, + + .get_frequency = dib0070_get_frequency, +// .get_bandwidth = dib0070_get_bandwidth +}; + +struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) +{ + struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL); + if (state == NULL) + return NULL; + + state->cfg = cfg; + state->i2c = i2c; + state->fe = fe; + mutex_init(&state->i2c_buffer_lock); + fe->tuner_priv = state; + + if (dib0070_reset(fe) != 0) + goto free_mem; + + printk(KERN_INFO "DiB0070: successfully identified\n"); + memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = state; + return fe; + +free_mem: + kfree(state); + fe->tuner_priv = NULL; + return NULL; +} +EXPORT_SYMBOL(dib0070_attach); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Driver for the DiBcom 0070 base-band RF Tuner"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dib0070.h b/drivers/media/dvb-frontends/dib0070.h new file mode 100644 index 00000000..0c6befcc --- /dev/null +++ b/drivers/media/dvb-frontends/dib0070.h @@ -0,0 +1,76 @@ +/* + * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner. + * + * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#ifndef DIB0070_H +#define DIB0070_H + +struct dvb_frontend; +struct i2c_adapter; + +#define DEFAULT_DIB0070_I2C_ADDRESS 0x60 + +struct dib0070_wbd_gain_cfg { + u16 freq; + u16 wbd_gain_val; +}; + +struct dib0070_config { + u8 i2c_address; + + /* tuner pins controlled externally */ + int (*reset) (struct dvb_frontend *, int); + int (*sleep) (struct dvb_frontend *, int); + + /* offset in kHz */ + int freq_offset_khz_uhf; + int freq_offset_khz_vhf; + + u8 osc_buffer_state; /* 0= normal, 1= tri-state */ + u32 clock_khz; + u8 clock_pad_drive; /* (Drive + 1) * 2mA */ + + u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */ + + u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */ + + u8 flip_chip; + u8 enable_third_order_filter; + u8 charge_pump; + + const struct dib0070_wbd_gain_cfg *wbd_gain; + + u8 vga_filter; +}; + +#if IS_ENABLED(CONFIG_DVB_TUNER_DIB0070) +extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); +extern u16 dib0070_wbd_offset(struct dvb_frontend *); +extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); +extern u8 dib0070_get_rf_output(struct dvb_frontend *fe); +extern int dib0070_set_rf_output(struct dvb_frontend *fe, u8 no); +#else +static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/dib0090.c b/drivers/media/dvb-frontends/dib0090.c new file mode 100644 index 00000000..3ee22ff7 --- /dev/null +++ b/drivers/media/dvb-frontends/dib0090.c @@ -0,0 +1,2668 @@ +/* + * Linux-DVB Driver for DiBcom's DiB0090 base-band RF Tuner. + * + * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * This code is more or less generated from another driver, please + * excuse some codingstyle oddities. + * + */ + +#include +#include +#include +#include + +#include "dvb_frontend.h" + +#include "dib0090.h" +#include "dibx000_common.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { \ + if (debug) { \ + printk(KERN_DEBUG "DiB0090: "); \ + printk(args); \ + printk("\n"); \ + } \ +} while (0) + +#define CONFIG_SYS_DVBT +#define CONFIG_SYS_ISDBT +#define CONFIG_BAND_CBAND +#define CONFIG_BAND_VHF +#define CONFIG_BAND_UHF +#define CONFIG_DIB0090_USE_PWM_AGC + +#define EN_LNA0 0x8000 +#define EN_LNA1 0x4000 +#define EN_LNA2 0x2000 +#define EN_LNA3 0x1000 +#define EN_MIX0 0x0800 +#define EN_MIX1 0x0400 +#define EN_MIX2 0x0200 +#define EN_MIX3 0x0100 +#define EN_IQADC 0x0040 +#define EN_PLL 0x0020 +#define EN_TX 0x0010 +#define EN_BB 0x0008 +#define EN_LO 0x0004 +#define EN_BIAS 0x0001 + +#define EN_IQANA 0x0002 +#define EN_DIGCLK 0x0080 /* not in the 0x24 reg, only in 0x1b */ +#define EN_CRYSTAL 0x0002 + +#define EN_UHF 0x22E9 +#define EN_VHF 0x44E9 +#define EN_LBD 0x11E9 +#define EN_SBD 0x44E9 +#define EN_CAB 0x88E9 + +/* Calibration defines */ +#define DC_CAL 0x1 +#define WBD_CAL 0x2 +#define TEMP_CAL 0x4 +#define CAPTRIM_CAL 0x8 + +#define KROSUS_PLL_LOCKED 0x800 +#define KROSUS 0x2 + +/* Use those defines to identify SOC version */ +#define SOC 0x02 +#define SOC_7090_P1G_11R1 0x82 +#define SOC_7090_P1G_21R1 0x8a +#define SOC_8090_P1G_11R1 0x86 +#define SOC_8090_P1G_21R1 0x8e + +/* else use thos ones to check */ +#define P1A_B 0x0 +#define P1C 0x1 +#define P1D_E_F 0x3 +#define P1G 0x7 +#define P1G_21R2 0xf + +#define MP001 0x1 /* Single 9090/8096 */ +#define MP005 0x4 /* Single Sband */ +#define MP008 0x6 /* Dual diversity VHF-UHF-LBAND */ +#define MP009 0x7 /* Dual diversity 29098 CBAND-UHF-LBAND-SBAND */ + +#define pgm_read_word(w) (*w) + +struct dc_calibration; + +struct dib0090_tuning { + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 switch_trim; + u8 lna_tune; + u16 lna_bias; + u16 v2i; + u16 mix; + u16 load; + u16 tuner_enable; +}; + +struct dib0090_pll { + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 vco_band; + u8 hfdiv_code; + u8 hfdiv; + u8 topresc; +}; + +struct dib0090_identity { + u8 version; + u8 product; + u8 p1g; + u8 in_soc; +}; + +struct dib0090_state { + struct i2c_adapter *i2c; + struct dvb_frontend *fe; + const struct dib0090_config *config; + + u8 current_band; + enum frontend_tune_state tune_state; + u32 current_rf; + + u16 wbd_offset; + s16 wbd_target; /* in dB */ + + s16 rf_gain_limit; /* take-over-point: where to split between bb and rf gain */ + s16 current_gain; /* keeps the currently programmed gain */ + u8 agc_step; /* new binary search */ + + u16 gain[2]; /* for channel monitoring */ + + const u16 *rf_ramp; + const u16 *bb_ramp; + + /* for the software AGC ramps */ + u16 bb_1_def; + u16 rf_lt_def; + u16 gain_reg[4]; + + /* for the captrim/dc-offset search */ + s8 step; + s16 adc_diff; + s16 min_adc_diff; + + s8 captrim; + s8 fcaptrim; + + const struct dc_calibration *dc; + u16 bb6, bb7; + + const struct dib0090_tuning *current_tune_table_index; + const struct dib0090_pll *current_pll_table_index; + + u8 tuner_is_tuned; + u8 agc_freeze; + + struct dib0090_identity identity; + + u32 rf_request; + u8 current_standard; + + u8 calibrate; + u32 rest; + u16 bias; + s16 temperature; + + u8 wbd_calibration_gain; + const struct dib0090_wbd_slope *current_wbd_table; + u16 wbdmux; + + /* for the I2C transfer */ + struct i2c_msg msg[2]; + u8 i2c_write_buffer[3]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; +}; + +struct dib0090_fw_state { + struct i2c_adapter *i2c; + struct dvb_frontend *fe; + struct dib0090_identity identity; + const struct dib0090_config *config; + + /* for the I2C transfer */ + struct i2c_msg msg; + u8 i2c_write_buffer[2]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; +}; + +static u16 dib0090_read_reg(struct dib0090_state *state, u8 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + state->i2c_write_buffer[0] = reg; + + memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); + state->msg[0].addr = state->config->i2c_address; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 1; + state->msg[1].addr = state->config->i2c_address; + state->msg[1].flags = I2C_M_RD; + state->msg[1].buf = state->i2c_read_buffer; + state->msg[1].len = 2; + + if (i2c_transfer(state->i2c, state->msg, 2) != 2) { + printk(KERN_WARNING "DiB0090 I2C read failed\n"); + ret = 0; + } else + ret = (state->i2c_read_buffer[0] << 8) + | state->i2c_read_buffer[1]; + + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} + +static int dib0090_write_reg(struct dib0090_state *state, u32 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + + state->i2c_write_buffer[0] = reg & 0xff; + state->i2c_write_buffer[1] = val >> 8; + state->i2c_write_buffer[2] = val & 0xff; + + memset(state->msg, 0, sizeof(struct i2c_msg)); + state->msg[0].addr = state->config->i2c_address; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 3; + + if (i2c_transfer(state->i2c, state->msg, 1) != 1) { + printk(KERN_WARNING "DiB0090 I2C write failed\n"); + ret = -EREMOTEIO; + } else + ret = 0; + + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} + +static u16 dib0090_fw_read_reg(struct dib0090_fw_state *state, u8 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + state->i2c_write_buffer[0] = reg; + + memset(&state->msg, 0, sizeof(struct i2c_msg)); + state->msg.addr = reg; + state->msg.flags = I2C_M_RD; + state->msg.buf = state->i2c_read_buffer; + state->msg.len = 2; + if (i2c_transfer(state->i2c, &state->msg, 1) != 1) { + printk(KERN_WARNING "DiB0090 I2C read failed\n"); + ret = 0; + } else + ret = (state->i2c_read_buffer[0] << 8) + | state->i2c_read_buffer[1]; + + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} + +static int dib0090_fw_write_reg(struct dib0090_fw_state *state, u8 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + + state->i2c_write_buffer[0] = val >> 8; + state->i2c_write_buffer[1] = val & 0xff; + + memset(&state->msg, 0, sizeof(struct i2c_msg)); + state->msg.addr = reg; + state->msg.flags = 0; + state->msg.buf = state->i2c_write_buffer; + state->msg.len = 2; + if (i2c_transfer(state->i2c, &state->msg, 1) != 1) { + printk(KERN_WARNING "DiB0090 I2C write failed\n"); + ret = -EREMOTEIO; + } else + ret = 0; + + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} + +#define HARD_RESET(state) do { if (cfg->reset) { if (cfg->sleep) cfg->sleep(fe, 0); msleep(10); cfg->reset(fe, 1); msleep(10); cfg->reset(fe, 0); msleep(10); } } while (0) +#define ADC_TARGET -220 +#define GAIN_ALPHA 5 +#define WBD_ALPHA 6 +#define LPF 100 +static void dib0090_write_regs(struct dib0090_state *state, u8 r, const u16 * b, u8 c) +{ + do { + dib0090_write_reg(state, r++, *b++); + } while (--c); +} + +static int dib0090_identify(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + u16 v; + struct dib0090_identity *identity = &state->identity; + + v = dib0090_read_reg(state, 0x1a); + + identity->p1g = 0; + identity->in_soc = 0; + + dprintk("Tuner identification (Version = 0x%04x)", v); + + /* without PLL lock info */ + v &= ~KROSUS_PLL_LOCKED; + + identity->version = v & 0xff; + identity->product = (v >> 8) & 0xf; + + if (identity->product != KROSUS) + goto identification_error; + + if ((identity->version & 0x3) == SOC) { + identity->in_soc = 1; + switch (identity->version) { + case SOC_8090_P1G_11R1: + dprintk("SOC 8090 P1-G11R1 Has been detected"); + identity->p1g = 1; + break; + case SOC_8090_P1G_21R1: + dprintk("SOC 8090 P1-G21R1 Has been detected"); + identity->p1g = 1; + break; + case SOC_7090_P1G_11R1: + dprintk("SOC 7090 P1-G11R1 Has been detected"); + identity->p1g = 1; + break; + case SOC_7090_P1G_21R1: + dprintk("SOC 7090 P1-G21R1 Has been detected"); + identity->p1g = 1; + break; + default: + goto identification_error; + } + } else { + switch ((identity->version >> 5) & 0x7) { + case MP001: + dprintk("MP001 : 9090/8096"); + break; + case MP005: + dprintk("MP005 : Single Sband"); + break; + case MP008: + dprintk("MP008 : diversity VHF-UHF-LBAND"); + break; + case MP009: + dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND"); + break; + default: + goto identification_error; + } + + switch (identity->version & 0x1f) { + case P1G_21R2: + dprintk("P1G_21R2 detected"); + identity->p1g = 1; + break; + case P1G: + dprintk("P1G detected"); + identity->p1g = 1; + break; + case P1D_E_F: + dprintk("P1D/E/F detected"); + break; + case P1C: + dprintk("P1C detected"); + break; + case P1A_B: + dprintk("P1-A/B detected: driver is deactivated - not available"); + goto identification_error; + break; + default: + goto identification_error; + } + } + + return 0; + +identification_error: + return -EIO; +} + +static int dib0090_fw_identify(struct dvb_frontend *fe) +{ + struct dib0090_fw_state *state = fe->tuner_priv; + struct dib0090_identity *identity = &state->identity; + + u16 v = dib0090_fw_read_reg(state, 0x1a); + identity->p1g = 0; + identity->in_soc = 0; + + dprintk("FE: Tuner identification (Version = 0x%04x)", v); + + /* without PLL lock info */ + v &= ~KROSUS_PLL_LOCKED; + + identity->version = v & 0xff; + identity->product = (v >> 8) & 0xf; + + if (identity->product != KROSUS) + goto identification_error; + + if ((identity->version & 0x3) == SOC) { + identity->in_soc = 1; + switch (identity->version) { + case SOC_8090_P1G_11R1: + dprintk("SOC 8090 P1-G11R1 Has been detected"); + identity->p1g = 1; + break; + case SOC_8090_P1G_21R1: + dprintk("SOC 8090 P1-G21R1 Has been detected"); + identity->p1g = 1; + break; + case SOC_7090_P1G_11R1: + dprintk("SOC 7090 P1-G11R1 Has been detected"); + identity->p1g = 1; + break; + case SOC_7090_P1G_21R1: + dprintk("SOC 7090 P1-G21R1 Has been detected"); + identity->p1g = 1; + break; + default: + goto identification_error; + } + } else { + switch ((identity->version >> 5) & 0x7) { + case MP001: + dprintk("MP001 : 9090/8096"); + break; + case MP005: + dprintk("MP005 : Single Sband"); + break; + case MP008: + dprintk("MP008 : diversity VHF-UHF-LBAND"); + break; + case MP009: + dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND"); + break; + default: + goto identification_error; + } + + switch (identity->version & 0x1f) { + case P1G_21R2: + dprintk("P1G_21R2 detected"); + identity->p1g = 1; + break; + case P1G: + dprintk("P1G detected"); + identity->p1g = 1; + break; + case P1D_E_F: + dprintk("P1D/E/F detected"); + break; + case P1C: + dprintk("P1C detected"); + break; + case P1A_B: + dprintk("P1-A/B detected: driver is deactivated - not available"); + goto identification_error; + break; + default: + goto identification_error; + } + } + + return 0; + +identification_error: + return -EIO; +} + +static void dib0090_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg) +{ + struct dib0090_state *state = fe->tuner_priv; + u16 PllCfg, i, v; + + HARD_RESET(state); + dib0090_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL); + if (cfg->in_soc) + return; + + dib0090_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL); /* PLL, DIG_CLK and CRYSTAL remain */ + /* adcClkOutRatio=8->7, release reset */ + dib0090_write_reg(state, 0x20, ((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (0 << 4) | 0); + if (cfg->clkoutdrive != 0) + dib0090_write_reg(state, 0x23, (0 << 15) | ((!cfg->analog_output) << 14) | (2 << 10) | (1 << 9) | (0 << 8) + | (cfg->clkoutdrive << 5) | (cfg->clkouttobamse << 4) | (0 << 2) | (0)); + else + dib0090_write_reg(state, 0x23, (0 << 15) | ((!cfg->analog_output) << 14) | (2 << 10) | (1 << 9) | (0 << 8) + | (7 << 5) | (cfg->clkouttobamse << 4) | (0 << 2) | (0)); + + /* Read Pll current config * */ + PllCfg = dib0090_read_reg(state, 0x21); + + /** Reconfigure PLL if current setting is different from default setting **/ + if ((PllCfg & 0x1FFF) != ((cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)) && (!cfg->in_soc) + && !cfg->io.pll_bypass) { + + /* Set Bypass mode */ + PllCfg |= (1 << 15); + dib0090_write_reg(state, 0x21, PllCfg); + + /* Set Reset Pll */ + PllCfg &= ~(1 << 13); + dib0090_write_reg(state, 0x21, PllCfg); + + /*** Set new Pll configuration in bypass and reset state ***/ + PllCfg = (1 << 15) | (0 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv); + dib0090_write_reg(state, 0x21, PllCfg); + + /* Remove Reset Pll */ + PllCfg |= (1 << 13); + dib0090_write_reg(state, 0x21, PllCfg); + + /*** Wait for PLL lock ***/ + i = 100; + do { + v = !!(dib0090_read_reg(state, 0x1a) & 0x800); + if (v) + break; + } while (--i); + + if (i == 0) { + dprintk("Pll: Unable to lock Pll"); + return; + } + + /* Finally Remove Bypass mode */ + PllCfg &= ~(1 << 15); + dib0090_write_reg(state, 0x21, PllCfg); + } + + if (cfg->io.pll_bypass) { + PllCfg |= (cfg->io.pll_bypass << 15); + dib0090_write_reg(state, 0x21, PllCfg); + } +} + +static int dib0090_fw_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg) +{ + struct dib0090_fw_state *state = fe->tuner_priv; + u16 PllCfg; + u16 v; + int i; + + dprintk("fw reset digital"); + HARD_RESET(state); + + dib0090_fw_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL); + dib0090_fw_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL); /* PLL, DIG_CLK and CRYSTAL remain */ + + dib0090_fw_write_reg(state, 0x20, + ((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (cfg->data_tx_drv << 4) | cfg->ls_cfg_pad_drv); + + v = (0 << 15) | ((!cfg->analog_output) << 14) | (1 << 9) | (0 << 8) | (cfg->clkouttobamse << 4) | (0 << 2) | (0); + if (cfg->clkoutdrive != 0) + v |= cfg->clkoutdrive << 5; + else + v |= 7 << 5; + + v |= 2 << 10; + dib0090_fw_write_reg(state, 0x23, v); + + /* Read Pll current config * */ + PllCfg = dib0090_fw_read_reg(state, 0x21); + + /** Reconfigure PLL if current setting is different from default setting **/ + if ((PllCfg & 0x1FFF) != ((cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)) && !cfg->io.pll_bypass) { + + /* Set Bypass mode */ + PllCfg |= (1 << 15); + dib0090_fw_write_reg(state, 0x21, PllCfg); + + /* Set Reset Pll */ + PllCfg &= ~(1 << 13); + dib0090_fw_write_reg(state, 0x21, PllCfg); + + /*** Set new Pll configuration in bypass and reset state ***/ + PllCfg = (1 << 15) | (0 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv); + dib0090_fw_write_reg(state, 0x21, PllCfg); + + /* Remove Reset Pll */ + PllCfg |= (1 << 13); + dib0090_fw_write_reg(state, 0x21, PllCfg); + + /*** Wait for PLL lock ***/ + i = 100; + do { + v = !!(dib0090_fw_read_reg(state, 0x1a) & 0x800); + if (v) + break; + } while (--i); + + if (i == 0) { + dprintk("Pll: Unable to lock Pll"); + return -EIO; + } + + /* Finally Remove Bypass mode */ + PllCfg &= ~(1 << 15); + dib0090_fw_write_reg(state, 0x21, PllCfg); + } + + if (cfg->io.pll_bypass) { + PllCfg |= (cfg->io.pll_bypass << 15); + dib0090_fw_write_reg(state, 0x21, PllCfg); + } + + return dib0090_fw_identify(fe); +} + +static int dib0090_wakeup(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + if (state->config->sleep) + state->config->sleep(fe, 0); + + /* enable dataTX in case we have been restarted in the wrong moment */ + dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14)); + return 0; +} + +static int dib0090_sleep(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + if (state->config->sleep) + state->config->sleep(fe, 1); + return 0; +} + +void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast) +{ + struct dib0090_state *state = fe->tuner_priv; + if (fast) + dib0090_write_reg(state, 0x04, 0); + else + dib0090_write_reg(state, 0x04, 1); +} + +EXPORT_SYMBOL(dib0090_dcc_freq); + +static const u16 bb_ramp_pwm_normal_socs[] = { + 550, /* max BB gain in 10th of dB */ + (1<<9) | 8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */ + 440, + (4 << 9) | 0, /* BB_RAMP3 = 26dB */ + (0 << 9) | 208, /* BB_RAMP4 */ + (4 << 9) | 208, /* BB_RAMP5 = 29dB */ + (0 << 9) | 440, /* BB_RAMP6 */ +}; + +static const u16 rf_ramp_pwm_cband_7090p[] = { + 280, /* max RF gain in 10th of dB */ + 18, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 504, /* ramp_max = maximum X used on the ramp */ + (29 << 10) | 364, /* RF_RAMP5, LNA 1 = 8dB */ + (0 << 10) | 504, /* RF_RAMP6, LNA 1 */ + (60 << 10) | 228, /* RF_RAMP7, LNA 2 = 7.7dB */ + (0 << 10) | 364, /* RF_RAMP8, LNA 2 */ + (34 << 10) | 109, /* GAIN_4_1, LNA 3 = 6.8dB */ + (0 << 10) | 228, /* GAIN_4_2, LNA 3 */ + (37 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */ + (0 << 10) | 109, /* RF_RAMP4, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_cband_7090e_sensitivity[] = { + 186, /* max RF gain in 10th of dB */ + 40, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 746, /* ramp_max = maximum X used on the ramp */ + (10 << 10) | 345, /* RF_RAMP5, LNA 1 = 10dB */ + (0 << 10) | 746, /* RF_RAMP6, LNA 1 */ + (0 << 10) | 0, /* RF_RAMP7, LNA 2 = 0 dB */ + (0 << 10) | 0, /* RF_RAMP8, LNA 2 */ + (28 << 10) | 200, /* GAIN_4_1, LNA 3 = 6.8dB */ /* 3.61 dB */ + (0 << 10) | 345, /* GAIN_4_2, LNA 3 */ + (20 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */ /* 4.96 dB */ + (0 << 10) | 200, /* RF_RAMP4, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_cband_7090e_aci[] = { + 86, /* max RF gain in 10th of dB */ + 40, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 345, /* ramp_max = maximum X used on the ramp */ + (0 << 10) | 0, /* RF_RAMP5, LNA 1 = 8dB */ /* 7.47 dB */ + (0 << 10) | 0, /* RF_RAMP6, LNA 1 */ + (0 << 10) | 0, /* RF_RAMP7, LNA 2 = 0 dB */ + (0 << 10) | 0, /* RF_RAMP8, LNA 2 */ + (28 << 10) | 200, /* GAIN_4_1, LNA 3 = 6.8dB */ /* 3.61 dB */ + (0 << 10) | 345, /* GAIN_4_2, LNA 3 */ + (20 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */ /* 4.96 dB */ + (0 << 10) | 200, /* RF_RAMP4, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_cband_8090[] = { + 345, /* max RF gain in 10th of dB */ + 29, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 1000, /* ramp_max = maximum X used on the ramp */ + (35 << 10) | 772, /* RF_RAMP3, LNA 1 = 8dB */ + (0 << 10) | 1000, /* RF_RAMP4, LNA 1 */ + (58 << 10) | 496, /* RF_RAMP5, LNA 2 = 9.5dB */ + (0 << 10) | 772, /* RF_RAMP6, LNA 2 */ + (27 << 10) | 200, /* RF_RAMP7, LNA 3 = 10.5dB */ + (0 << 10) | 496, /* RF_RAMP8, LNA 3 */ + (40 << 10) | 0, /* GAIN_4_1, LNA 4 = 7dB */ + (0 << 10) | 200, /* GAIN_4_2, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_uhf_7090[] = { + 407, /* max RF gain in 10th of dB */ + 13, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 529, /* ramp_max = maximum X used on the ramp */ + (23 << 10) | 0, /* RF_RAMP3, LNA 1 = 14.7dB */ + (0 << 10) | 176, /* RF_RAMP4, LNA 1 */ + (63 << 10) | 400, /* RF_RAMP5, LNA 2 = 8dB */ + (0 << 10) | 529, /* RF_RAMP6, LNA 2 */ + (48 << 10) | 316, /* RF_RAMP7, LNA 3 = 6.8dB */ + (0 << 10) | 400, /* RF_RAMP8, LNA 3 */ + (29 << 10) | 176, /* GAIN_4_1, LNA 4 = 11.5dB */ + (0 << 10) | 316, /* GAIN_4_2, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_uhf_8090[] = { + 388, /* max RF gain in 10th of dB */ + 26, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 1008, /* ramp_max = maximum X used on the ramp */ + (11 << 10) | 0, /* RF_RAMP3, LNA 1 = 14.7dB */ + (0 << 10) | 369, /* RF_RAMP4, LNA 1 */ + (41 << 10) | 809, /* RF_RAMP5, LNA 2 = 8dB */ + (0 << 10) | 1008, /* RF_RAMP6, LNA 2 */ + (27 << 10) | 659, /* RF_RAMP7, LNA 3 = 6dB */ + (0 << 10) | 809, /* RF_RAMP8, LNA 3 */ + (14 << 10) | 369, /* GAIN_4_1, LNA 4 = 11.5dB */ + (0 << 10) | 659, /* GAIN_4_2, LNA 4 */ +}; + +/* GENERAL PWM ramp definition for all other Krosus */ +static const u16 bb_ramp_pwm_normal[] = { + 500, /* max BB gain in 10th of dB */ + 8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */ + 400, + (2 << 9) | 0, /* BB_RAMP3 = 21dB */ + (0 << 9) | 168, /* BB_RAMP4 */ + (2 << 9) | 168, /* BB_RAMP5 = 29dB */ + (0 << 9) | 400, /* BB_RAMP6 */ +}; + +static const u16 bb_ramp_pwm_boost[] = { + 550, /* max BB gain in 10th of dB */ + 8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */ + 440, + (2 << 9) | 0, /* BB_RAMP3 = 26dB */ + (0 << 9) | 208, /* BB_RAMP4 */ + (2 << 9) | 208, /* BB_RAMP5 = 29dB */ + (0 << 9) | 440, /* BB_RAMP6 */ +}; + +static const u16 rf_ramp_pwm_cband[] = { + 314, /* max RF gain in 10th of dB */ + 33, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 1023, /* ramp_max = maximum X used on the ramp */ + (8 << 10) | 743, /* RF_RAMP3, LNA 1 = 0dB */ + (0 << 10) | 1023, /* RF_RAMP4, LNA 1 */ + (15 << 10) | 469, /* RF_RAMP5, LNA 2 = 0dB */ + (0 << 10) | 742, /* RF_RAMP6, LNA 2 */ + (9 << 10) | 234, /* RF_RAMP7, LNA 3 = 0dB */ + (0 << 10) | 468, /* RF_RAMP8, LNA 3 */ + (9 << 10) | 0, /* GAIN_4_1, LNA 4 = 0dB */ + (0 << 10) | 233, /* GAIN_4_2, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_vhf[] = { + 398, /* max RF gain in 10th of dB */ + 24, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 954, /* ramp_max = maximum X used on the ramp */ + (7 << 10) | 0, /* RF_RAMP3, LNA 1 = 13.2dB */ + (0 << 10) | 290, /* RF_RAMP4, LNA 1 */ + (16 << 10) | 699, /* RF_RAMP5, LNA 2 = 10.5dB */ + (0 << 10) | 954, /* RF_RAMP6, LNA 2 */ + (17 << 10) | 580, /* RF_RAMP7, LNA 3 = 5dB */ + (0 << 10) | 699, /* RF_RAMP8, LNA 3 */ + (7 << 10) | 290, /* GAIN_4_1, LNA 4 = 12.5dB */ + (0 << 10) | 580, /* GAIN_4_2, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_uhf[] = { + 398, /* max RF gain in 10th of dB */ + 24, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 954, /* ramp_max = maximum X used on the ramp */ + (7 << 10) | 0, /* RF_RAMP3, LNA 1 = 13.2dB */ + (0 << 10) | 290, /* RF_RAMP4, LNA 1 */ + (16 << 10) | 699, /* RF_RAMP5, LNA 2 = 10.5dB */ + (0 << 10) | 954, /* RF_RAMP6, LNA 2 */ + (17 << 10) | 580, /* RF_RAMP7, LNA 3 = 5dB */ + (0 << 10) | 699, /* RF_RAMP8, LNA 3 */ + (7 << 10) | 290, /* GAIN_4_1, LNA 4 = 12.5dB */ + (0 << 10) | 580, /* GAIN_4_2, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_sband[] = { + 253, /* max RF gain in 10th of dB */ + 38, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */ + 961, + (4 << 10) | 0, /* RF_RAMP3, LNA 1 = 14.1dB */ + (0 << 10) | 508, /* RF_RAMP4, LNA 1 */ + (9 << 10) | 508, /* RF_RAMP5, LNA 2 = 11.2dB */ + (0 << 10) | 961, /* RF_RAMP6, LNA 2 */ + (0 << 10) | 0, /* RF_RAMP7, LNA 3 = 0dB */ + (0 << 10) | 0, /* RF_RAMP8, LNA 3 */ + (0 << 10) | 0, /* GAIN_4_1, LNA 4 = 0dB */ + (0 << 10) | 0, /* GAIN_4_2, LNA 4 */ +}; + +struct slope { + s16 range; + s16 slope; +}; +static u16 slopes_to_scale(const struct slope *slopes, u8 num, s16 val) +{ + u8 i; + u16 rest; + u16 ret = 0; + for (i = 0; i < num; i++) { + if (val > slopes[i].range) + rest = slopes[i].range; + else + rest = val; + ret += (rest * slopes[i].slope) / slopes[i].range; + val -= rest; + } + return ret; +} + +static const struct slope dib0090_wbd_slopes[3] = { + {66, 120}, /* -64,-52: offset - 65 */ + {600, 170}, /* -52,-35: 65 - 665 */ + {170, 250}, /* -45,-10: 665 - 835 */ +}; + +static s16 dib0090_wbd_to_db(struct dib0090_state *state, u16 wbd) +{ + wbd &= 0x3ff; + if (wbd < state->wbd_offset) + wbd = 0; + else + wbd -= state->wbd_offset; + /* -64dB is the floor */ + return -640 + (s16) slopes_to_scale(dib0090_wbd_slopes, ARRAY_SIZE(dib0090_wbd_slopes), wbd); +} + +static void dib0090_wbd_target(struct dib0090_state *state, u32 rf) +{ + u16 offset = 250; + + /* TODO : DAB digital N+/-1 interferer perfs : offset = 10 */ + + if (state->current_band == BAND_VHF) + offset = 650; +#ifndef FIRMWARE_FIREFLY + if (state->current_band == BAND_VHF) + offset = state->config->wbd_vhf_offset; + if (state->current_band == BAND_CBAND) + offset = state->config->wbd_cband_offset; +#endif + + state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + offset); + dprintk("wbd-target: %d dB", (u32) state->wbd_target); +} + +static const int gain_reg_addr[4] = { + 0x08, 0x0a, 0x0f, 0x01 +}; + +static void dib0090_gain_apply(struct dib0090_state *state, s16 gain_delta, s16 top_delta, u8 force) +{ + u16 rf, bb, ref; + u16 i, v, gain_reg[4] = { 0 }, gain; + const u16 *g; + + if (top_delta < -511) + top_delta = -511; + if (top_delta > 511) + top_delta = 511; + + if (force) { + top_delta *= (1 << WBD_ALPHA); + gain_delta *= (1 << GAIN_ALPHA); + } + + if (top_delta >= ((s16) (state->rf_ramp[0] << WBD_ALPHA) - state->rf_gain_limit)) /* overflow */ + state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA; + else + state->rf_gain_limit += top_delta; + + if (state->rf_gain_limit < 0) /*underflow */ + state->rf_gain_limit = 0; + + /* use gain as a temporary variable and correct current_gain */ + gain = ((state->rf_gain_limit >> WBD_ALPHA) + state->bb_ramp[0]) << GAIN_ALPHA; + if (gain_delta >= ((s16) gain - state->current_gain)) /* overflow */ + state->current_gain = gain; + else + state->current_gain += gain_delta; + /* cannot be less than 0 (only if gain_delta is less than 0 we can have current_gain < 0) */ + if (state->current_gain < 0) + state->current_gain = 0; + + /* now split total gain to rf and bb gain */ + gain = state->current_gain >> GAIN_ALPHA; + + /* requested gain is bigger than rf gain limit - ACI/WBD adjustment */ + if (gain > (state->rf_gain_limit >> WBD_ALPHA)) { + rf = state->rf_gain_limit >> WBD_ALPHA; + bb = gain - rf; + if (bb > state->bb_ramp[0]) + bb = state->bb_ramp[0]; + } else { /* high signal level -> all gains put on RF */ + rf = gain; + bb = 0; + } + + state->gain[0] = rf; + state->gain[1] = bb; + + /* software ramp */ + /* Start with RF gains */ + g = state->rf_ramp + 1; /* point on RF LNA1 max gain */ + ref = rf; + for (i = 0; i < 7; i++) { /* Go over all amplifiers => 5RF amps + 2 BB amps = 7 amps */ + if (g[0] == 0 || ref < (g[1] - g[0])) /* if total gain of the current amp is null or this amp is not concerned because it starts to work from an higher gain value */ + v = 0; /* force the gain to write for the current amp to be null */ + else if (ref >= g[1]) /* Gain to set is higher than the high working point of this amp */ + v = g[2]; /* force this amp to be full gain */ + else /* compute the value to set to this amp because we are somewhere in his range */ + v = ((ref - (g[1] - g[0])) * g[2]) / g[0]; + + if (i == 0) /* LNA 1 reg mapping */ + gain_reg[0] = v; + else if (i == 1) /* LNA 2 reg mapping */ + gain_reg[0] |= v << 7; + else if (i == 2) /* LNA 3 reg mapping */ + gain_reg[1] = v; + else if (i == 3) /* LNA 4 reg mapping */ + gain_reg[1] |= v << 7; + else if (i == 4) /* CBAND LNA reg mapping */ + gain_reg[2] = v | state->rf_lt_def; + else if (i == 5) /* BB gain 1 reg mapping */ + gain_reg[3] = v << 3; + else if (i == 6) /* BB gain 2 reg mapping */ + gain_reg[3] |= v << 8; + + g += 3; /* go to next gain bloc */ + + /* When RF is finished, start with BB */ + if (i == 4) { + g = state->bb_ramp + 1; /* point on BB gain 1 max gain */ + ref = bb; + } + } + gain_reg[3] |= state->bb_1_def; + gain_reg[3] |= ((bb % 10) * 100) / 125; + +#ifdef DEBUG_AGC + dprintk("GA CALC: DB: %3d(rf) + %3d(bb) = %3d gain_reg[0]=%04x gain_reg[1]=%04x gain_reg[2]=%04x gain_reg[0]=%04x", rf, bb, rf + bb, + gain_reg[0], gain_reg[1], gain_reg[2], gain_reg[3]); +#endif + + /* Write the amplifier regs */ + for (i = 0; i < 4; i++) { + v = gain_reg[i]; + if (force || state->gain_reg[i] != v) { + state->gain_reg[i] = v; + dib0090_write_reg(state, gain_reg_addr[i], v); + } + } +} + +static void dib0090_set_boost(struct dib0090_state *state, int onoff) +{ + state->bb_1_def &= 0xdfff; + state->bb_1_def |= onoff << 13; +} + +static void dib0090_set_rframp(struct dib0090_state *state, const u16 * cfg) +{ + state->rf_ramp = cfg; +} + +static void dib0090_set_rframp_pwm(struct dib0090_state *state, const u16 * cfg) +{ + state->rf_ramp = cfg; + + dib0090_write_reg(state, 0x2a, 0xffff); + + dprintk("total RF gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x2a)); + + dib0090_write_regs(state, 0x2c, cfg + 3, 6); + dib0090_write_regs(state, 0x3e, cfg + 9, 2); +} + +static void dib0090_set_bbramp(struct dib0090_state *state, const u16 * cfg) +{ + state->bb_ramp = cfg; + dib0090_set_boost(state, cfg[0] > 500); /* we want the boost if the gain is higher that 50dB */ +} + +static void dib0090_set_bbramp_pwm(struct dib0090_state *state, const u16 * cfg) +{ + state->bb_ramp = cfg; + + dib0090_set_boost(state, cfg[0] > 500); /* we want the boost if the gain is higher that 50dB */ + + dib0090_write_reg(state, 0x33, 0xffff); + dprintk("total BB gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x33)); + dib0090_write_regs(state, 0x35, cfg + 3, 4); +} + +void dib0090_pwm_gain_reset(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + u16 *bb_ramp = (u16 *)&bb_ramp_pwm_normal; /* default baseband config */ + u16 *rf_ramp = NULL; + u8 en_pwm_rf_mux = 1; + + /* reset the AGC */ + if (state->config->use_pwm_agc) { + if (state->current_band == BAND_CBAND) { + if (state->identity.in_soc) { + bb_ramp = (u16 *)&bb_ramp_pwm_normal_socs; + if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1) + rf_ramp = (u16 *)&rf_ramp_pwm_cband_8090; + else if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1) { + if (state->config->is_dib7090e) { + if (state->rf_ramp == NULL) + rf_ramp = (u16 *)&rf_ramp_pwm_cband_7090e_sensitivity; + else + rf_ramp = (u16 *)state->rf_ramp; + } else + rf_ramp = (u16 *)&rf_ramp_pwm_cband_7090p; + } + } else + rf_ramp = (u16 *)&rf_ramp_pwm_cband; + } else + + if (state->current_band == BAND_VHF) { + if (state->identity.in_soc) { + bb_ramp = (u16 *)&bb_ramp_pwm_normal_socs; + /* rf_ramp = &rf_ramp_pwm_vhf_socs; */ /* TODO */ + } else + rf_ramp = (u16 *)&rf_ramp_pwm_vhf; + } else if (state->current_band == BAND_UHF) { + if (state->identity.in_soc) { + bb_ramp = (u16 *)&bb_ramp_pwm_normal_socs; + if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1) + rf_ramp = (u16 *)&rf_ramp_pwm_uhf_8090; + else if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1) + rf_ramp = (u16 *)&rf_ramp_pwm_uhf_7090; + } else + rf_ramp = (u16 *)&rf_ramp_pwm_uhf; + } + if (rf_ramp) + dib0090_set_rframp_pwm(state, rf_ramp); + dib0090_set_bbramp_pwm(state, bb_ramp); + + /* activate the ramp generator using PWM control */ + dprintk("ramp RF gain = %d BAND = %s version = %d", state->rf_ramp[0], (state->current_band == BAND_CBAND) ? "CBAND" : "NOT CBAND", state->identity.version & 0x1f); + + if ((state->rf_ramp[0] == 0) || (state->current_band == BAND_CBAND && (state->identity.version & 0x1f) <= P1D_E_F)) { + dprintk("DE-Engage mux for direct gain reg control"); + en_pwm_rf_mux = 0; + } else + dprintk("Engage mux for PWM control"); + + dib0090_write_reg(state, 0x32, (en_pwm_rf_mux << 12) | (en_pwm_rf_mux << 11)); + + /* Set fast servo cutoff to start AGC; 0 = 1KHz ; 1 = 50Hz ; 2 = 150Hz ; 3 = 50KHz ; 4 = servo fast*/ + if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1) + dib0090_write_reg(state, 0x04, 3); + else + dib0090_write_reg(state, 0x04, 1); + dib0090_write_reg(state, 0x39, (1 << 10)); /* 0 gain by default */ + } +} +EXPORT_SYMBOL(dib0090_pwm_gain_reset); + +void dib0090_set_dc_servo(struct dvb_frontend *fe, u8 DC_servo_cutoff) +{ + struct dib0090_state *state = fe->tuner_priv; + if (DC_servo_cutoff < 4) + dib0090_write_reg(state, 0x04, DC_servo_cutoff); +} +EXPORT_SYMBOL(dib0090_set_dc_servo); + +static u32 dib0090_get_slow_adc_val(struct dib0090_state *state) +{ + u16 adc_val = dib0090_read_reg(state, 0x1d); + if (state->identity.in_soc) + adc_val >>= 2; + return adc_val; +} + +int dib0090_gain_control(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + enum frontend_tune_state *tune_state = &state->tune_state; + int ret = 10; + + u16 wbd_val = 0; + u8 apply_gain_immediatly = 1; + s16 wbd_error = 0, adc_error = 0; + + if (*tune_state == CT_AGC_START) { + state->agc_freeze = 0; + dib0090_write_reg(state, 0x04, 0x0); + +#ifdef CONFIG_BAND_SBAND + if (state->current_band == BAND_SBAND) { + dib0090_set_rframp(state, rf_ramp_sband); + dib0090_set_bbramp(state, bb_ramp_boost); + } else +#endif +#ifdef CONFIG_BAND_VHF + if (state->current_band == BAND_VHF && !state->identity.p1g) { + dib0090_set_rframp(state, rf_ramp_pwm_vhf); + dib0090_set_bbramp(state, bb_ramp_pwm_normal); + } else +#endif +#ifdef CONFIG_BAND_CBAND + if (state->current_band == BAND_CBAND && !state->identity.p1g) { + dib0090_set_rframp(state, rf_ramp_pwm_cband); + dib0090_set_bbramp(state, bb_ramp_pwm_normal); + } else +#endif + if ((state->current_band == BAND_CBAND || state->current_band == BAND_VHF) && state->identity.p1g) { + dib0090_set_rframp(state, rf_ramp_pwm_cband_7090p); + dib0090_set_bbramp(state, bb_ramp_pwm_normal_socs); + } else { + dib0090_set_rframp(state, rf_ramp_pwm_uhf); + dib0090_set_bbramp(state, bb_ramp_pwm_normal); + } + + dib0090_write_reg(state, 0x32, 0); + dib0090_write_reg(state, 0x39, 0); + + dib0090_wbd_target(state, state->current_rf); + + state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA; + state->current_gain = ((state->rf_ramp[0] + state->bb_ramp[0]) / 2) << GAIN_ALPHA; + + *tune_state = CT_AGC_STEP_0; + } else if (!state->agc_freeze) { + s16 wbd = 0, i, cnt; + + int adc; + wbd_val = dib0090_get_slow_adc_val(state); + + if (*tune_state == CT_AGC_STEP_0) + cnt = 5; + else + cnt = 1; + + for (i = 0; i < cnt; i++) { + wbd_val = dib0090_get_slow_adc_val(state); + wbd += dib0090_wbd_to_db(state, wbd_val); + } + wbd /= cnt; + wbd_error = state->wbd_target - wbd; + + if (*tune_state == CT_AGC_STEP_0) { + if (wbd_error < 0 && state->rf_gain_limit > 0 && !state->identity.p1g) { +#ifdef CONFIG_BAND_CBAND + /* in case of CBAND tune reduce first the lt_gain2 before adjusting the RF gain */ + u8 ltg2 = (state->rf_lt_def >> 10) & 0x7; + if (state->current_band == BAND_CBAND && ltg2) { + ltg2 >>= 1; + state->rf_lt_def &= ltg2 << 10; /* reduce in 3 steps from 7 to 0 */ + } +#endif + } else { + state->agc_step = 0; + *tune_state = CT_AGC_STEP_1; + } + } else { + /* calc the adc power */ + adc = state->config->get_adc_power(fe); + adc = (adc * ((s32) 355774) + (((s32) 1) << 20)) >> 21; /* included in [0:-700] */ + + adc_error = (s16) (((s32) ADC_TARGET) - adc); +#ifdef CONFIG_STANDARD_DAB + if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB) + adc_error -= 10; +#endif +#ifdef CONFIG_STANDARD_DVBT + if (state->fe->dtv_property_cache.delivery_system == STANDARD_DVBT && + (state->fe->dtv_property_cache.modulation == QAM_64 || state->fe->dtv_property_cache.modulation == QAM_16)) + adc_error += 60; +#endif +#ifdef CONFIG_SYS_ISDBT + if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) && (((state->fe->dtv_property_cache.layer[0].segment_count > + 0) + && + ((state->fe->dtv_property_cache.layer[0].modulation == + QAM_64) + || (state->fe->dtv_property_cache. + layer[0].modulation == QAM_16))) + || + ((state->fe->dtv_property_cache.layer[1].segment_count > + 0) + && + ((state->fe->dtv_property_cache.layer[1].modulation == + QAM_64) + || (state->fe->dtv_property_cache. + layer[1].modulation == QAM_16))) + || + ((state->fe->dtv_property_cache.layer[2].segment_count > + 0) + && + ((state->fe->dtv_property_cache.layer[2].modulation == + QAM_64) + || (state->fe->dtv_property_cache. + layer[2].modulation == QAM_16))) + ) + ) + adc_error += 60; +#endif + + if (*tune_state == CT_AGC_STEP_1) { /* quickly go to the correct range of the ADC power */ + if (ABS(adc_error) < 50 || state->agc_step++ > 5) { + +#ifdef CONFIG_STANDARD_DAB + if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB) { + dib0090_write_reg(state, 0x02, (1 << 15) | (15 << 11) | (31 << 6) | (63)); /* cap value = 63 : narrow BB filter : Fc = 1.8MHz */ + dib0090_write_reg(state, 0x04, 0x0); + } else +#endif + { + dib0090_write_reg(state, 0x02, (1 << 15) | (3 << 11) | (6 << 6) | (32)); + dib0090_write_reg(state, 0x04, 0x01); /*0 = 1KHz ; 1 = 150Hz ; 2 = 50Hz ; 3 = 50KHz ; 4 = servo fast */ + } + + *tune_state = CT_AGC_STOP; + } + } else { + /* everything higher than or equal to CT_AGC_STOP means tracking */ + ret = 100; /* 10ms interval */ + apply_gain_immediatly = 0; + } + } +#ifdef DEBUG_AGC + dprintk + ("tune state %d, ADC = %3ddB (ADC err %3d) WBD %3ddB (WBD err %3d, WBD val SADC: %4d), RFGainLimit (TOP): %3d, signal: %3ddBm", + (u32) *tune_state, (u32) adc, (u32) adc_error, (u32) wbd, (u32) wbd_error, (u32) wbd_val, + (u32) state->rf_gain_limit >> WBD_ALPHA, (s32) 200 + adc - (state->current_gain >> GAIN_ALPHA)); +#endif + } + + /* apply gain */ + if (!state->agc_freeze) + dib0090_gain_apply(state, adc_error, wbd_error, apply_gain_immediatly); + return ret; +} + +EXPORT_SYMBOL(dib0090_gain_control); + +void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt) +{ + struct dib0090_state *state = fe->tuner_priv; + if (rf) + *rf = state->gain[0]; + if (bb) + *bb = state->gain[1]; + if (rf_gain_limit) + *rf_gain_limit = state->rf_gain_limit; + if (rflt) + *rflt = (state->rf_lt_def >> 10) & 0x7; +} + +EXPORT_SYMBOL(dib0090_get_current_gain); + +u16 dib0090_get_wbd_target(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + u32 f_MHz = state->fe->dtv_property_cache.frequency / 1000000; + s32 current_temp = state->temperature; + s32 wbd_thot, wbd_tcold; + const struct dib0090_wbd_slope *wbd = state->current_wbd_table; + + while (f_MHz > wbd->max_freq) + wbd++; + + dprintk("using wbd-table-entry with max freq %d", wbd->max_freq); + + if (current_temp < 0) + current_temp = 0; + if (current_temp > 128) + current_temp = 128; + + state->wbdmux &= ~(7 << 13); + if (wbd->wbd_gain != 0) + state->wbdmux |= (wbd->wbd_gain << 13); + else + state->wbdmux |= (4 << 13); + + dib0090_write_reg(state, 0x10, state->wbdmux); + + wbd_thot = wbd->offset_hot - (((u32) wbd->slope_hot * f_MHz) >> 6); + wbd_tcold = wbd->offset_cold - (((u32) wbd->slope_cold * f_MHz) >> 6); + + wbd_tcold += ((wbd_thot - wbd_tcold) * current_temp) >> 7; + + state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + wbd_tcold); + dprintk("wbd-target: %d dB", (u32) state->wbd_target); + dprintk("wbd offset applied is %d", wbd_tcold); + + return state->wbd_offset + wbd_tcold; +} +EXPORT_SYMBOL(dib0090_get_wbd_target); + +u16 dib0090_get_wbd_offset(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + return state->wbd_offset; +} +EXPORT_SYMBOL(dib0090_get_wbd_offset); + +int dib0090_set_switch(struct dvb_frontend *fe, u8 sw1, u8 sw2, u8 sw3) +{ + struct dib0090_state *state = fe->tuner_priv; + + dib0090_write_reg(state, 0x0b, (dib0090_read_reg(state, 0x0b) & 0xfff8) + | ((sw3 & 1) << 2) | ((sw2 & 1) << 1) | (sw1 & 1)); + + return 0; +} +EXPORT_SYMBOL(dib0090_set_switch); + +int dib0090_set_vga(struct dvb_frontend *fe, u8 onoff) +{ + struct dib0090_state *state = fe->tuner_priv; + + dib0090_write_reg(state, 0x09, (dib0090_read_reg(state, 0x09) & 0x7fff) + | ((onoff & 1) << 15)); + return 0; +} +EXPORT_SYMBOL(dib0090_set_vga); + +int dib0090_update_rframp_7090(struct dvb_frontend *fe, u8 cfg_sensitivity) +{ + struct dib0090_state *state = fe->tuner_priv; + + if ((!state->identity.p1g) || (!state->identity.in_soc) + || ((state->identity.version != SOC_7090_P1G_21R1) + && (state->identity.version != SOC_7090_P1G_11R1))) { + dprintk("%s() function can only be used for dib7090P", __func__); + return -ENODEV; + } + + if (cfg_sensitivity) + state->rf_ramp = (const u16 *)&rf_ramp_pwm_cband_7090e_sensitivity; + else + state->rf_ramp = (const u16 *)&rf_ramp_pwm_cband_7090e_aci; + dib0090_pwm_gain_reset(fe); + + return 0; +} +EXPORT_SYMBOL(dib0090_update_rframp_7090); + +static const u16 dib0090_defaults[] = { + + 25, 0x01, + 0x0000, + 0x99a0, + 0x6008, + 0x0000, + 0x8bcb, + 0x0000, + 0x0405, + 0x0000, + 0x0000, + 0x0000, + 0xb802, + 0x0300, + 0x2d12, + 0xbac0, + 0x7c00, + 0xdbb9, + 0x0954, + 0x0743, + 0x8000, + 0x0001, + 0x0040, + 0x0100, + 0x0000, + 0xe910, + 0x149e, + + 1, 0x1c, + 0xff2d, + + 1, 0x39, + 0x0000, + + 2, 0x1e, + 0x07FF, + 0x0007, + + 1, 0x24, + EN_UHF | EN_CRYSTAL, + + 2, 0x3c, + 0x3ff, + 0x111, + 0 +}; + +static const u16 dib0090_p1g_additionnal_defaults[] = { + 1, 0x05, + 0xabcd, + + 1, 0x11, + 0x00b4, + + 1, 0x1c, + 0xfffd, + + 1, 0x40, + 0x108, + 0 +}; + +static void dib0090_set_default_config(struct dib0090_state *state, const u16 * n) +{ + u16 l, r; + + l = pgm_read_word(n++); + while (l) { + r = pgm_read_word(n++); + do { + dib0090_write_reg(state, r, pgm_read_word(n++)); + r++; + } while (--l); + l = pgm_read_word(n++); + } +} + +#define CAP_VALUE_MIN (u8) 9 +#define CAP_VALUE_MAX (u8) 40 +#define HR_MIN (u8) 25 +#define HR_MAX (u8) 40 +#define POLY_MIN (u8) 0 +#define POLY_MAX (u8) 8 + +static void dib0090_set_EFUSE(struct dib0090_state *state) +{ + u8 c, h, n; + u16 e2, e4; + u16 cal; + + e2 = dib0090_read_reg(state, 0x26); + e4 = dib0090_read_reg(state, 0x28); + + if ((state->identity.version == P1D_E_F) || + (state->identity.version == P1G) || (e2 == 0xffff)) { + + dib0090_write_reg(state, 0x22, 0x10); + cal = (dib0090_read_reg(state, 0x22) >> 6) & 0x3ff; + + if ((cal < 670) || (cal == 1023)) + cal = 850; + n = 165 - ((cal * 10)>>6) ; + e2 = e4 = (3<<12) | (34<<6) | (n); + } + + if (e2 != e4) + e2 &= e4; /* Remove the redundancy */ + + if (e2 != 0xffff) { + c = e2 & 0x3f; + n = (e2 >> 12) & 0xf; + h = (e2 >> 6) & 0x3f; + + if ((c >= CAP_VALUE_MAX) || (c <= CAP_VALUE_MIN)) + c = 32; + else + c += 14; + if ((h >= HR_MAX) || (h <= HR_MIN)) + h = 34; + if ((n >= POLY_MAX) || (n <= POLY_MIN)) + n = 3; + + dib0090_write_reg(state, 0x13, (h << 10)); + e2 = (n << 11) | ((h >> 2)<<6) | c; + dib0090_write_reg(state, 0x2, e2); /* Load the BB_2 */ + } +} + +static int dib0090_reset(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + + dib0090_reset_digital(fe, state->config); + if (dib0090_identify(fe) < 0) + return -EIO; + +#ifdef CONFIG_TUNER_DIB0090_P1B_SUPPORT + if (!(state->identity.version & 0x1)) /* it is P1B - reset is already done */ + return 0; +#endif + + if (!state->identity.in_soc) { + if ((dib0090_read_reg(state, 0x1a) >> 5) & 0x2) + dib0090_write_reg(state, 0x1b, (EN_IQADC | EN_BB | EN_BIAS | EN_DIGCLK | EN_PLL | EN_CRYSTAL)); + else + dib0090_write_reg(state, 0x1b, (EN_DIGCLK | EN_PLL | EN_CRYSTAL)); + } + + dib0090_set_default_config(state, dib0090_defaults); + + if (state->identity.in_soc) + dib0090_write_reg(state, 0x18, 0x2910); /* charge pump current = 0 */ + + if (state->identity.p1g) + dib0090_set_default_config(state, dib0090_p1g_additionnal_defaults); + + /* Update the efuse : Only available for KROSUS > P1C and SOC as well*/ + if (((state->identity.version & 0x1f) >= P1D_E_F) || (state->identity.in_soc)) + dib0090_set_EFUSE(state); + + /* Congigure in function of the crystal */ + if (state->config->force_crystal_mode != 0) + dib0090_write_reg(state, 0x14, + state->config->force_crystal_mode & 3); + else if (state->config->io.clock_khz >= 24000) + dib0090_write_reg(state, 0x14, 1); + else + dib0090_write_reg(state, 0x14, 2); + dprintk("Pll lock : %d", (dib0090_read_reg(state, 0x1a) >> 11) & 0x1); + + state->calibrate = DC_CAL | WBD_CAL | TEMP_CAL; /* enable iq-offset-calibration and wbd-calibration when tuning next time */ + + return 0; +} + +#define steps(u) (((u) > 15) ? ((u)-16) : (u)) +#define INTERN_WAIT 10 +static int dib0090_get_offset(struct dib0090_state *state, enum frontend_tune_state *tune_state) +{ + int ret = INTERN_WAIT * 10; + + switch (*tune_state) { + case CT_TUNER_STEP_2: + /* Turns to positive */ + dib0090_write_reg(state, 0x1f, 0x7); + *tune_state = CT_TUNER_STEP_3; + break; + + case CT_TUNER_STEP_3: + state->adc_diff = dib0090_read_reg(state, 0x1d); + + /* Turns to negative */ + dib0090_write_reg(state, 0x1f, 0x4); + *tune_state = CT_TUNER_STEP_4; + break; + + case CT_TUNER_STEP_4: + state->adc_diff -= dib0090_read_reg(state, 0x1d); + *tune_state = CT_TUNER_STEP_5; + ret = 0; + break; + + default: + break; + } + + return ret; +} + +struct dc_calibration { + u8 addr; + u8 offset; + u8 pga:1; + u16 bb1; + u8 i:1; +}; + +static const struct dc_calibration dc_table[] = { + /* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */ + {0x06, 5, 1, (1 << 13) | (0 << 8) | (26 << 3), 1}, + {0x07, 11, 1, (1 << 13) | (0 << 8) | (26 << 3), 0}, + /* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */ + {0x06, 0, 0, (1 << 13) | (29 << 8) | (26 << 3), 1}, + {0x06, 10, 0, (1 << 13) | (29 << 8) | (26 << 3), 0}, + {0}, +}; + +static const struct dc_calibration dc_p1g_table[] = { + /* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */ + /* addr ; trim reg offset ; pga ; CTRL_BB1 value ; i or q */ + {0x06, 5, 1, (1 << 13) | (0 << 8) | (15 << 3), 1}, + {0x07, 11, 1, (1 << 13) | (0 << 8) | (15 << 3), 0}, + /* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */ + {0x06, 0, 0, (1 << 13) | (29 << 8) | (15 << 3), 1}, + {0x06, 10, 0, (1 << 13) | (29 << 8) | (15 << 3), 0}, + {0}, +}; + +static void dib0090_set_trim(struct dib0090_state *state) +{ + u16 *val; + + if (state->dc->addr == 0x07) + val = &state->bb7; + else + val = &state->bb6; + + *val &= ~(0x1f << state->dc->offset); + *val |= state->step << state->dc->offset; + + dib0090_write_reg(state, state->dc->addr, *val); +} + +static int dib0090_dc_offset_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state) +{ + int ret = 0; + u16 reg; + + switch (*tune_state) { + case CT_TUNER_START: + dprintk("Start DC offset calibration"); + + /* force vcm2 = 0.8V */ + state->bb6 = 0; + state->bb7 = 0x040d; + + /* the LNA AND LO are off */ + reg = dib0090_read_reg(state, 0x24) & 0x0ffb; /* shutdown lna and lo */ + dib0090_write_reg(state, 0x24, reg); + + state->wbdmux = dib0090_read_reg(state, 0x10); + dib0090_write_reg(state, 0x10, (state->wbdmux & ~(0xff << 3)) | (0x7 << 3) | 0x3); + dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) & ~(1 << 14)); + + state->dc = dc_table; + + if (state->identity.p1g) + state->dc = dc_p1g_table; + *tune_state = CT_TUNER_STEP_0; + + /* fall through */ + + case CT_TUNER_STEP_0: + dprintk("Sart/continue DC calibration for %s path", (state->dc->i == 1) ? "I" : "Q"); + dib0090_write_reg(state, 0x01, state->dc->bb1); + dib0090_write_reg(state, 0x07, state->bb7 | (state->dc->i << 7)); + + state->step = 0; + state->min_adc_diff = 1023; + *tune_state = CT_TUNER_STEP_1; + ret = 50; + break; + + case CT_TUNER_STEP_1: + dib0090_set_trim(state); + *tune_state = CT_TUNER_STEP_2; + break; + + case CT_TUNER_STEP_2: + case CT_TUNER_STEP_3: + case CT_TUNER_STEP_4: + ret = dib0090_get_offset(state, tune_state); + break; + + case CT_TUNER_STEP_5: /* found an offset */ + dprintk("adc_diff = %d, current step= %d", (u32) state->adc_diff, state->step); + if (state->step == 0 && state->adc_diff < 0) { + state->min_adc_diff = -1023; + dprintk("Change of sign of the minimum adc diff"); + } + + dprintk("adc_diff = %d, min_adc_diff = %d current_step = %d", state->adc_diff, state->min_adc_diff, state->step); + + /* first turn for this frequency */ + if (state->step == 0) { + if (state->dc->pga && state->adc_diff < 0) + state->step = 0x10; + if (state->dc->pga == 0 && state->adc_diff > 0) + state->step = 0x10; + } + + /* Look for a change of Sign in the Adc_diff.min_adc_diff is used to STORE the setp N-1 */ + if ((state->adc_diff & 0x8000) == (state->min_adc_diff & 0x8000) && steps(state->step) < 15) { + /* stop search when the delta the sign is changing and Steps =15 and Step=0 is force for continuance */ + state->step++; + state->min_adc_diff = state->adc_diff; + *tune_state = CT_TUNER_STEP_1; + } else { + /* the minimum was what we have seen in the step before */ + if (ABS(state->adc_diff) > ABS(state->min_adc_diff)) { + dprintk("Since adc_diff N = %d > adc_diff step N-1 = %d, Come back one step", state->adc_diff, state->min_adc_diff); + state->step--; + } + + dib0090_set_trim(state); + dprintk("BB Offset Cal, BBreg=%hd,Offset=%hd,Value Set=%hd", state->dc->addr, state->adc_diff, state->step); + + state->dc++; + if (state->dc->addr == 0) /* done */ + *tune_state = CT_TUNER_STEP_6; + else + *tune_state = CT_TUNER_STEP_0; + + } + break; + + case CT_TUNER_STEP_6: + dib0090_write_reg(state, 0x07, state->bb7 & ~0x0008); + dib0090_write_reg(state, 0x1f, 0x7); + *tune_state = CT_TUNER_START; /* reset done -> real tuning can now begin */ + state->calibrate &= ~DC_CAL; + default: + break; + } + return ret; +} + +static int dib0090_wbd_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state) +{ + u8 wbd_gain; + const struct dib0090_wbd_slope *wbd = state->current_wbd_table; + + switch (*tune_state) { + case CT_TUNER_START: + while (state->current_rf / 1000 > wbd->max_freq) + wbd++; + if (wbd->wbd_gain != 0) + wbd_gain = wbd->wbd_gain; + else { + wbd_gain = 4; +#if defined(CONFIG_BAND_LBAND) || defined(CONFIG_BAND_SBAND) + if ((state->current_band == BAND_LBAND) || (state->current_band == BAND_SBAND)) + wbd_gain = 2; +#endif + } + + if (wbd_gain == state->wbd_calibration_gain) { /* the WBD calibration has already been done */ + *tune_state = CT_TUNER_START; + state->calibrate &= ~WBD_CAL; + return 0; + } + + dib0090_write_reg(state, 0x10, 0x1b81 | (1 << 10) | (wbd_gain << 13) | (1 << 3)); + + dib0090_write_reg(state, 0x24, ((EN_UHF & 0x0fff) | (1 << 1))); + *tune_state = CT_TUNER_STEP_0; + state->wbd_calibration_gain = wbd_gain; + return 90; /* wait for the WBDMUX to switch and for the ADC to sample */ + + case CT_TUNER_STEP_0: + state->wbd_offset = dib0090_get_slow_adc_val(state); + dprintk("WBD calibration offset = %d", state->wbd_offset); + *tune_state = CT_TUNER_START; /* reset done -> real tuning can now begin */ + state->calibrate &= ~WBD_CAL; + break; + + default: + break; + } + return 0; +} + +static void dib0090_set_bandwidth(struct dib0090_state *state) +{ + u16 tmp; + + if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 5000) + tmp = (3 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 6000) + tmp = (2 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 7000) + tmp = (1 << 14); + else + tmp = (0 << 14); + + state->bb_1_def &= 0x3fff; + state->bb_1_def |= tmp; + + dib0090_write_reg(state, 0x01, state->bb_1_def); /* be sure that we have the right bb-filter */ + + dib0090_write_reg(state, 0x03, 0x6008); /* = 0x6008 : vcm3_trim = 1 ; filter2_gm1_trim = 8 ; filter2_cutoff_freq = 0 */ + dib0090_write_reg(state, 0x04, 0x1); /* 0 = 1KHz ; 1 = 50Hz ; 2 = 150Hz ; 3 = 50KHz ; 4 = servo fast */ + if (state->identity.in_soc) { + dib0090_write_reg(state, 0x05, 0x9bcf); /* attenuator_ibias_tri = 2 ; input_stage_ibias_tr = 1 ; nc = 11 ; ext_gm_trim = 1 ; obuf_ibias_trim = 4 ; filter13_gm2_ibias_t = 15 */ + } else { + dib0090_write_reg(state, 0x02, (5 << 11) | (8 << 6) | (22 & 0x3f)); /* 22 = cap_value */ + dib0090_write_reg(state, 0x05, 0xabcd); /* = 0xabcd : attenuator_ibias_tri = 2 ; input_stage_ibias_tr = 2 ; nc = 11 ; ext_gm_trim = 1 ; obuf_ibias_trim = 4 ; filter13_gm2_ibias_t = 13 */ + } +} + +static const struct dib0090_pll dib0090_pll_table[] = { +#ifdef CONFIG_BAND_CBAND + {56000, 0, 9, 48, 6}, + {70000, 1, 9, 48, 6}, + {87000, 0, 8, 32, 4}, + {105000, 1, 8, 32, 4}, + {115000, 0, 7, 24, 6}, + {140000, 1, 7, 24, 6}, + {170000, 0, 6, 16, 4}, +#endif +#ifdef CONFIG_BAND_VHF + {200000, 1, 6, 16, 4}, + {230000, 0, 5, 12, 6}, + {280000, 1, 5, 12, 6}, + {340000, 0, 4, 8, 4}, + {380000, 1, 4, 8, 4}, + {450000, 0, 3, 6, 6}, +#endif +#ifdef CONFIG_BAND_UHF + {580000, 1, 3, 6, 6}, + {700000, 0, 2, 4, 4}, + {860000, 1, 2, 4, 4}, +#endif +#ifdef CONFIG_BAND_LBAND + {1800000, 1, 0, 2, 4}, +#endif +#ifdef CONFIG_BAND_SBAND + {2900000, 0, 14, 1, 4}, +#endif +}; + +static const struct dib0090_tuning dib0090_tuning_table_fm_vhf_on_cband[] = { + +#ifdef CONFIG_BAND_CBAND + {184000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB}, + {227000, 4, 3, 15, 0x280, 0x2912, 0xb94e, EN_CAB}, + {380000, 4, 7, 15, 0x280, 0x2912, 0xb94e, EN_CAB}, +#endif +#ifdef CONFIG_BAND_UHF + {520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, +#endif +#ifdef CONFIG_BAND_LBAND + {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, +#endif +#ifdef CONFIG_BAND_SBAND + {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD}, + {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD}, +#endif +}; + +static const struct dib0090_tuning dib0090_tuning_table[] = { + +#ifdef CONFIG_BAND_CBAND + {170000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB}, +#endif +#ifdef CONFIG_BAND_VHF + {184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, + {227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, + {380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, +#endif +#ifdef CONFIG_BAND_UHF + {520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, +#endif +#ifdef CONFIG_BAND_LBAND + {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, +#endif +#ifdef CONFIG_BAND_SBAND + {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD}, + {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD}, +#endif +}; + +static const struct dib0090_tuning dib0090_p1g_tuning_table[] = { +#ifdef CONFIG_BAND_CBAND + {170000, 4, 1, 0x820f, 0x300, 0x2d22, 0x82cb, EN_CAB}, +#endif +#ifdef CONFIG_BAND_VHF + {184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, + {227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, + {380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, +#endif +#ifdef CONFIG_BAND_UHF + {510000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {540000, 2, 1, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {600000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {630000, 2, 4, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {680000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {720000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, +#endif +#ifdef CONFIG_BAND_LBAND + {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, +#endif +#ifdef CONFIG_BAND_SBAND + {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD}, + {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD}, +#endif +}; + +static const struct dib0090_pll dib0090_p1g_pll_table[] = { +#ifdef CONFIG_BAND_CBAND + {57000, 0, 11, 48, 6}, + {70000, 1, 11, 48, 6}, + {86000, 0, 10, 32, 4}, + {105000, 1, 10, 32, 4}, + {115000, 0, 9, 24, 6}, + {140000, 1, 9, 24, 6}, + {170000, 0, 8, 16, 4}, +#endif +#ifdef CONFIG_BAND_VHF + {200000, 1, 8, 16, 4}, + {230000, 0, 7, 12, 6}, + {280000, 1, 7, 12, 6}, + {340000, 0, 6, 8, 4}, + {380000, 1, 6, 8, 4}, + {455000, 0, 5, 6, 6}, +#endif +#ifdef CONFIG_BAND_UHF + {580000, 1, 5, 6, 6}, + {680000, 0, 4, 4, 4}, + {860000, 1, 4, 4, 4}, +#endif +#ifdef CONFIG_BAND_LBAND + {1800000, 1, 2, 2, 4}, +#endif +#ifdef CONFIG_BAND_SBAND + {2900000, 0, 1, 1, 6}, +#endif +}; + +static const struct dib0090_tuning dib0090_p1g_tuning_table_fm_vhf_on_cband[] = { +#ifdef CONFIG_BAND_CBAND + {184000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB}, + {227000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB}, + {380000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB}, +#endif +#ifdef CONFIG_BAND_UHF + {520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, +#endif +#ifdef CONFIG_BAND_LBAND + {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, +#endif +#ifdef CONFIG_BAND_SBAND + {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD}, + {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD}, +#endif +}; + +static const struct dib0090_tuning dib0090_tuning_table_cband_7090[] = { +#ifdef CONFIG_BAND_CBAND + {300000, 4, 3, 0x018F, 0x2c0, 0x2d22, 0xb9ce, EN_CAB}, + {380000, 4, 10, 0x018F, 0x2c0, 0x2d22, 0xb9ce, EN_CAB}, + {570000, 4, 10, 0x8190, 0x2c0, 0x2d22, 0xb9ce, EN_CAB}, + {858000, 4, 5, 0x8190, 0x2c0, 0x2d22, 0xb9ce, EN_CAB}, +#endif +}; + +static const struct dib0090_tuning dib0090_tuning_table_cband_7090e_sensitivity[] = { +#ifdef CONFIG_BAND_CBAND + { 300000, 0 , 3, 0x8105, 0x2c0, 0x2d12, 0xb84e, EN_CAB }, + { 380000, 0 , 10, 0x810F, 0x2c0, 0x2d12, 0xb84e, EN_CAB }, + { 600000, 0 , 10, 0x815E, 0x280, 0x2d12, 0xb84e, EN_CAB }, + { 660000, 0 , 5, 0x85E3, 0x280, 0x2d12, 0xb84e, EN_CAB }, + { 720000, 0 , 5, 0x852E, 0x280, 0x2d12, 0xb84e, EN_CAB }, + { 860000, 0 , 4, 0x85E5, 0x280, 0x2d12, 0xb84e, EN_CAB }, +#endif +}; + +int dib0090_update_tuning_table_7090(struct dvb_frontend *fe, + u8 cfg_sensitivity) +{ + struct dib0090_state *state = fe->tuner_priv; + const struct dib0090_tuning *tune = + dib0090_tuning_table_cband_7090e_sensitivity; + const struct dib0090_tuning dib0090_tuning_table_cband_7090e_aci[] = { + { 300000, 0 , 3, 0x8165, 0x2c0, 0x2d12, 0xb84e, EN_CAB }, + { 650000, 0 , 4, 0x815B, 0x280, 0x2d12, 0xb84e, EN_CAB }, + { 860000, 0 , 5, 0x84EF, 0x280, 0x2d12, 0xb84e, EN_CAB }, + }; + + if ((!state->identity.p1g) || (!state->identity.in_soc) + || ((state->identity.version != SOC_7090_P1G_21R1) + && (state->identity.version != SOC_7090_P1G_11R1))) { + dprintk("%s() function can only be used for dib7090", __func__); + return -ENODEV; + } + + if (cfg_sensitivity) + tune = dib0090_tuning_table_cband_7090e_sensitivity; + else + tune = dib0090_tuning_table_cband_7090e_aci; + + while (state->rf_request > tune->max_freq) + tune++; + + dib0090_write_reg(state, 0x09, (dib0090_read_reg(state, 0x09) & 0x8000) + | (tune->lna_bias & 0x7fff)); + dib0090_write_reg(state, 0x0b, (dib0090_read_reg(state, 0x0b) & 0xf83f) + | ((tune->lna_tune << 6) & 0x07c0)); + return 0; +} +EXPORT_SYMBOL(dib0090_update_tuning_table_7090); + +static int dib0090_captrim_search(struct dib0090_state *state, enum frontend_tune_state *tune_state) +{ + int ret = 0; + u16 lo4 = 0xe900; + + s16 adc_target; + u16 adc; + s8 step_sign; + u8 force_soft_search = 0; + + if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1) + force_soft_search = 1; + + if (*tune_state == CT_TUNER_START) { + dprintk("Start Captrim search : %s", (force_soft_search == 1) ? "FORCE SOFT SEARCH" : "AUTO"); + dib0090_write_reg(state, 0x10, 0x2B1); + dib0090_write_reg(state, 0x1e, 0x0032); + + if (!state->tuner_is_tuned) { + /* prepare a complete captrim */ + if (!state->identity.p1g || force_soft_search) + state->step = state->captrim = state->fcaptrim = 64; + + state->current_rf = state->rf_request; + } else { /* we are already tuned to this frequency - the configuration is correct */ + if (!state->identity.p1g || force_soft_search) { + /* do a minimal captrim even if the frequency has not changed */ + state->step = 4; + state->captrim = state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7f; + } + } + state->adc_diff = 3000; + *tune_state = CT_TUNER_STEP_0; + + } else if (*tune_state == CT_TUNER_STEP_0) { + if (state->identity.p1g && !force_soft_search) { + u8 ratio = 31; + + dib0090_write_reg(state, 0x40, (3 << 7) | (ratio << 2) | (1 << 1) | 1); + dib0090_read_reg(state, 0x40); + ret = 50; + } else { + state->step /= 2; + dib0090_write_reg(state, 0x18, lo4 | state->captrim); + + if (state->identity.in_soc) + ret = 25; + } + *tune_state = CT_TUNER_STEP_1; + + } else if (*tune_state == CT_TUNER_STEP_1) { + if (state->identity.p1g && !force_soft_search) { + dib0090_write_reg(state, 0x40, 0x18c | (0 << 1) | 0); + dib0090_read_reg(state, 0x40); + + state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7F; + dprintk("***Final Captrim= 0x%x", state->fcaptrim); + *tune_state = CT_TUNER_STEP_3; + + } else { + /* MERGE for all krosus before P1G */ + adc = dib0090_get_slow_adc_val(state); + dprintk("CAPTRIM=%d; ADC = %d (ADC) & %dmV", (u32) state->captrim, (u32) adc, (u32) (adc) * (u32) 1800 / (u32) 1024); + + if (state->rest == 0 || state->identity.in_soc) { /* Just for 8090P SOCS where auto captrim HW bug : TO CHECK IN ACI for SOCS !!! if 400 for 8090p SOC => tune issue !!! */ + adc_target = 200; + } else + adc_target = 400; + + if (adc >= adc_target) { + adc -= adc_target; + step_sign = -1; + } else { + adc = adc_target - adc; + step_sign = 1; + } + + if (adc < state->adc_diff) { + dprintk("CAPTRIM=%d is closer to target (%d/%d)", (u32) state->captrim, (u32) adc, (u32) state->adc_diff); + state->adc_diff = adc; + state->fcaptrim = state->captrim; + } + + state->captrim += step_sign * state->step; + if (state->step >= 1) + *tune_state = CT_TUNER_STEP_0; + else + *tune_state = CT_TUNER_STEP_2; + + ret = 25; + } + } else if (*tune_state == CT_TUNER_STEP_2) { /* this step is only used by krosus < P1G */ + /*write the final cptrim config */ + dib0090_write_reg(state, 0x18, lo4 | state->fcaptrim); + + *tune_state = CT_TUNER_STEP_3; + + } else if (*tune_state == CT_TUNER_STEP_3) { + state->calibrate &= ~CAPTRIM_CAL; + *tune_state = CT_TUNER_STEP_0; + } + + return ret; +} + +static int dib0090_get_temperature(struct dib0090_state *state, enum frontend_tune_state *tune_state) +{ + int ret = 15; + s16 val; + + switch (*tune_state) { + case CT_TUNER_START: + state->wbdmux = dib0090_read_reg(state, 0x10); + dib0090_write_reg(state, 0x10, (state->wbdmux & ~(0xff << 3)) | (0x8 << 3)); + + state->bias = dib0090_read_reg(state, 0x13); + dib0090_write_reg(state, 0x13, state->bias | (0x3 << 8)); + + *tune_state = CT_TUNER_STEP_0; + /* wait for the WBDMUX to switch and for the ADC to sample */ + break; + + case CT_TUNER_STEP_0: + state->adc_diff = dib0090_get_slow_adc_val(state); + dib0090_write_reg(state, 0x13, (state->bias & ~(0x3 << 8)) | (0x2 << 8)); + *tune_state = CT_TUNER_STEP_1; + break; + + case CT_TUNER_STEP_1: + val = dib0090_get_slow_adc_val(state); + state->temperature = ((s16) ((val - state->adc_diff) * 180) >> 8) + 55; + + dprintk("temperature: %d C", state->temperature - 30); + + *tune_state = CT_TUNER_STEP_2; + break; + + case CT_TUNER_STEP_2: + dib0090_write_reg(state, 0x13, state->bias); + dib0090_write_reg(state, 0x10, state->wbdmux); /* write back original WBDMUX */ + + *tune_state = CT_TUNER_START; + state->calibrate &= ~TEMP_CAL; + if (state->config->analog_output == 0) + dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14)); + + break; + + default: + ret = 0; + break; + } + return ret; +} + +#define WBD 0x781 /* 1 1 1 1 0000 0 0 1 */ +static int dib0090_tune(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + const struct dib0090_tuning *tune = state->current_tune_table_index; + const struct dib0090_pll *pll = state->current_pll_table_index; + enum frontend_tune_state *tune_state = &state->tune_state; + + u16 lo5, lo6, Den, tmp; + u32 FBDiv, Rest, FREF, VCOF_kHz = 0; + int ret = 10; /* 1ms is the default delay most of the time */ + u8 c, i; + + /************************* VCO ***************************/ + /* Default values for FG */ + /* from these are needed : */ + /* Cp,HFdiv,VCOband,SD,Num,Den,FB and REFDiv */ + + /* in any case we first need to do a calibration if needed */ + if (*tune_state == CT_TUNER_START) { + /* deactivate DataTX before some calibrations */ + if (state->calibrate & (DC_CAL | TEMP_CAL | WBD_CAL)) + dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) & ~(1 << 14)); + else + /* Activate DataTX in case a calibration has been done before */ + if (state->config->analog_output == 0) + dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14)); + } + + if (state->calibrate & DC_CAL) + return dib0090_dc_offset_calibration(state, tune_state); + else if (state->calibrate & WBD_CAL) { + if (state->current_rf == 0) + state->current_rf = state->fe->dtv_property_cache.frequency / 1000; + return dib0090_wbd_calibration(state, tune_state); + } else if (state->calibrate & TEMP_CAL) + return dib0090_get_temperature(state, tune_state); + else if (state->calibrate & CAPTRIM_CAL) + return dib0090_captrim_search(state, tune_state); + + if (*tune_state == CT_TUNER_START) { + /* if soc and AGC pwm control, disengage mux to be able to R/W access to 0x01 register to set the right filter (cutoff_freq_select) during the tune sequence, otherwise, SOC SERPAR error when accessing to 0x01 */ + if (state->config->use_pwm_agc && state->identity.in_soc) { + tmp = dib0090_read_reg(state, 0x39); + if ((tmp >> 10) & 0x1) + dib0090_write_reg(state, 0x39, tmp & ~(1 << 10)); + } + + state->current_band = (u8) BAND_OF_FREQUENCY(state->fe->dtv_property_cache.frequency / 1000); + state->rf_request = + state->fe->dtv_property_cache.frequency / 1000 + (state->current_band == + BAND_UHF ? state->config->freq_offset_khz_uhf : state->config-> + freq_offset_khz_vhf); + + /* in ISDB-T 1seg we shift tuning frequency */ + if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1 + && state->fe->dtv_property_cache.isdbt_partial_reception == 0)) { + const struct dib0090_low_if_offset_table *LUT_offset = state->config->low_if; + u8 found_offset = 0; + u32 margin_khz = 100; + + if (LUT_offset != NULL) { + while (LUT_offset->RF_freq != 0xffff) { + if (((state->rf_request > (LUT_offset->RF_freq - margin_khz)) + && (state->rf_request < (LUT_offset->RF_freq + margin_khz))) + && LUT_offset->std == state->fe->dtv_property_cache.delivery_system) { + state->rf_request += LUT_offset->offset_khz; + found_offset = 1; + break; + } + LUT_offset++; + } + } + + if (found_offset == 0) + state->rf_request += 400; + } + if (state->current_rf != state->rf_request || (state->current_standard != state->fe->dtv_property_cache.delivery_system)) { + state->tuner_is_tuned = 0; + state->current_rf = 0; + state->current_standard = 0; + + tune = dib0090_tuning_table; + if (state->identity.p1g) + tune = dib0090_p1g_tuning_table; + + tmp = (state->identity.version >> 5) & 0x7; + + if (state->identity.in_soc) { + if (state->config->force_cband_input) { /* Use the CBAND input for all band */ + if (state->current_band & BAND_CBAND || state->current_band & BAND_FM || state->current_band & BAND_VHF + || state->current_band & BAND_UHF) { + state->current_band = BAND_CBAND; + if (state->config->is_dib7090e) + tune = dib0090_tuning_table_cband_7090e_sensitivity; + else + tune = dib0090_tuning_table_cband_7090; + } + } else { /* Use the CBAND input for all band under UHF */ + if (state->current_band & BAND_CBAND || state->current_band & BAND_FM || state->current_band & BAND_VHF) { + state->current_band = BAND_CBAND; + if (state->config->is_dib7090e) + tune = dib0090_tuning_table_cband_7090e_sensitivity; + else + tune = dib0090_tuning_table_cband_7090; + } + } + } else + if (tmp == 0x4 || tmp == 0x7) { + /* CBAND tuner version for VHF */ + if (state->current_band == BAND_FM || state->current_band == BAND_CBAND || state->current_band == BAND_VHF) { + state->current_band = BAND_CBAND; /* Force CBAND */ + + tune = dib0090_tuning_table_fm_vhf_on_cband; + if (state->identity.p1g) + tune = dib0090_p1g_tuning_table_fm_vhf_on_cband; + } + } + + pll = dib0090_pll_table; + if (state->identity.p1g) + pll = dib0090_p1g_pll_table; + + /* Look for the interval */ + while (state->rf_request > tune->max_freq) + tune++; + while (state->rf_request > pll->max_freq) + pll++; + + state->current_tune_table_index = tune; + state->current_pll_table_index = pll; + + dib0090_write_reg(state, 0x0b, 0xb800 | (tune->switch_trim)); + + VCOF_kHz = (pll->hfdiv * state->rf_request) * 2; + + FREF = state->config->io.clock_khz; + if (state->config->fref_clock_ratio != 0) + FREF /= state->config->fref_clock_ratio; + + FBDiv = (VCOF_kHz / pll->topresc / FREF); + Rest = (VCOF_kHz / pll->topresc) - FBDiv * FREF; + + if (Rest < LPF) + Rest = 0; + else if (Rest < 2 * LPF) + Rest = 2 * LPF; + else if (Rest > (FREF - LPF)) { + Rest = 0; + FBDiv += 1; + } else if (Rest > (FREF - 2 * LPF)) + Rest = FREF - 2 * LPF; + Rest = (Rest * 6528) / (FREF / 10); + state->rest = Rest; + + /* external loop filter, otherwise: + * lo5 = (0 << 15) | (0 << 12) | (0 << 11) | (3 << 9) | (4 << 6) | (3 << 4) | 4; + * lo6 = 0x0e34 */ + + if (Rest == 0) { + if (pll->vco_band) + lo5 = 0x049f; + else + lo5 = 0x041f; + } else { + if (pll->vco_band) + lo5 = 0x049e; + else if (state->config->analog_output) + lo5 = 0x041d; + else + lo5 = 0x041c; + } + + if (state->identity.p1g) { /* Bias is done automatically in P1G */ + if (state->identity.in_soc) { + if (state->identity.version == SOC_8090_P1G_11R1) + lo5 = 0x46f; + else + lo5 = 0x42f; + } else + lo5 = 0x42c; + } + + lo5 |= (pll->hfdiv_code << 11) | (pll->vco_band << 7); /* bit 15 is the split to the slave, we do not do it here */ + + if (!state->config->io.pll_int_loop_filt) { + if (state->identity.in_soc) + lo6 = 0xff98; + else if (state->identity.p1g || (Rest == 0)) + lo6 = 0xfff8; + else + lo6 = 0xff28; + } else + lo6 = (state->config->io.pll_int_loop_filt << 3); + + Den = 1; + + if (Rest > 0) { + if (state->config->analog_output) + lo6 |= (1 << 2) | 2; + else { + if (state->identity.in_soc) + lo6 |= (1 << 2) | 2; + else + lo6 |= (1 << 2) | 2; + } + Den = 255; + } + dib0090_write_reg(state, 0x15, (u16) FBDiv); + if (state->config->fref_clock_ratio != 0) + dib0090_write_reg(state, 0x16, (Den << 8) | state->config->fref_clock_ratio); + else + dib0090_write_reg(state, 0x16, (Den << 8) | 1); + dib0090_write_reg(state, 0x17, (u16) Rest); + dib0090_write_reg(state, 0x19, lo5); + dib0090_write_reg(state, 0x1c, lo6); + + lo6 = tune->tuner_enable; + if (state->config->analog_output) + lo6 = (lo6 & 0xff9f) | 0x2; + + dib0090_write_reg(state, 0x24, lo6 | EN_LO | state->config->use_pwm_agc * EN_CRYSTAL); + + } + + state->current_rf = state->rf_request; + state->current_standard = state->fe->dtv_property_cache.delivery_system; + + ret = 20; + state->calibrate = CAPTRIM_CAL; /* captrim serach now */ + } + + else if (*tune_state == CT_TUNER_STEP_0) { /* Warning : because of captrim cal, if you change this step, change it also in _cal.c file because it is the step following captrim cal state machine */ + const struct dib0090_wbd_slope *wbd = state->current_wbd_table; + + while (state->current_rf / 1000 > wbd->max_freq) + wbd++; + + dib0090_write_reg(state, 0x1e, 0x07ff); + dprintk("Final Captrim: %d", (u32) state->fcaptrim); + dprintk("HFDIV code: %d", (u32) pll->hfdiv_code); + dprintk("VCO = %d", (u32) pll->vco_band); + dprintk("VCOF in kHz: %d ((%d*%d) << 1))", (u32) ((pll->hfdiv * state->rf_request) * 2), (u32) pll->hfdiv, (u32) state->rf_request); + dprintk("REFDIV: %d, FREF: %d", (u32) 1, (u32) state->config->io.clock_khz); + dprintk("FBDIV: %d, Rest: %d", (u32) dib0090_read_reg(state, 0x15), (u32) dib0090_read_reg(state, 0x17)); + dprintk("Num: %d, Den: %d, SD: %d", (u32) dib0090_read_reg(state, 0x17), (u32) (dib0090_read_reg(state, 0x16) >> 8), + (u32) dib0090_read_reg(state, 0x1c) & 0x3); + +#define WBD 0x781 /* 1 1 1 1 0000 0 0 1 */ + c = 4; + i = 3; + + if (wbd->wbd_gain != 0) + c = wbd->wbd_gain; + + state->wbdmux = (c << 13) | (i << 11) | (WBD | (state->config->use_pwm_agc << 1)); + dib0090_write_reg(state, 0x10, state->wbdmux); + + if ((tune->tuner_enable == EN_CAB) && state->identity.p1g) { + dprintk("P1G : The cable band is selected and lna_tune = %d", tune->lna_tune); + dib0090_write_reg(state, 0x09, tune->lna_bias); + dib0090_write_reg(state, 0x0b, 0xb800 | (tune->lna_tune << 6) | (tune->switch_trim)); + } else + dib0090_write_reg(state, 0x09, (tune->lna_tune << 5) | tune->lna_bias); + + dib0090_write_reg(state, 0x0c, tune->v2i); + dib0090_write_reg(state, 0x0d, tune->mix); + dib0090_write_reg(state, 0x0e, tune->load); + *tune_state = CT_TUNER_STEP_1; + + } else if (*tune_state == CT_TUNER_STEP_1) { + /* initialize the lt gain register */ + state->rf_lt_def = 0x7c00; + + dib0090_set_bandwidth(state); + state->tuner_is_tuned = 1; + + state->calibrate |= WBD_CAL; + state->calibrate |= TEMP_CAL; + *tune_state = CT_TUNER_STOP; + } else + ret = FE_CALLBACK_TIME_NEVER; + return ret; +} + +static int dib0090_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + + return state->tune_state; +} + +EXPORT_SYMBOL(dib0090_get_tune_state); + +int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) +{ + struct dib0090_state *state = fe->tuner_priv; + + state->tune_state = tune_state; + return 0; +} + +EXPORT_SYMBOL(dib0090_set_tune_state); + +static int dib0090_get_frequency(struct dvb_frontend *fe, u32 * frequency) +{ + struct dib0090_state *state = fe->tuner_priv; + + *frequency = 1000 * state->current_rf; + return 0; +} + +static int dib0090_set_params(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + u32 ret; + + state->tune_state = CT_TUNER_START; + + do { + ret = dib0090_tune(fe); + if (ret != FE_CALLBACK_TIME_NEVER) + msleep(ret / 10); + else + break; + } while (state->tune_state != CT_TUNER_STOP); + + return 0; +} + +static const struct dvb_tuner_ops dib0090_ops = { + .info = { + .name = "DiBcom DiB0090", + .frequency_min = 45000000, + .frequency_max = 860000000, + .frequency_step = 1000, + }, + .release = dib0090_release, + + .init = dib0090_wakeup, + .sleep = dib0090_sleep, + .set_params = dib0090_set_params, + .get_frequency = dib0090_get_frequency, +}; + +static const struct dvb_tuner_ops dib0090_fw_ops = { + .info = { + .name = "DiBcom DiB0090", + .frequency_min = 45000000, + .frequency_max = 860000000, + .frequency_step = 1000, + }, + .release = dib0090_release, + + .init = NULL, + .sleep = NULL, + .set_params = NULL, + .get_frequency = NULL, +}; + +static const struct dib0090_wbd_slope dib0090_wbd_table_default[] = { + {470, 0, 250, 0, 100, 4}, + {860, 51, 866, 21, 375, 4}, + {1700, 0, 800, 0, 850, 4}, + {2900, 0, 250, 0, 100, 6}, + {0xFFFF, 0, 0, 0, 0, 0}, +}; + +struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config) +{ + struct dib0090_state *st = kzalloc(sizeof(struct dib0090_state), GFP_KERNEL); + if (st == NULL) + return NULL; + + st->config = config; + st->i2c = i2c; + st->fe = fe; + mutex_init(&st->i2c_buffer_lock); + fe->tuner_priv = st; + + if (config->wbd == NULL) + st->current_wbd_table = dib0090_wbd_table_default; + else + st->current_wbd_table = config->wbd; + + if (dib0090_reset(fe) != 0) + goto free_mem; + + printk(KERN_INFO "DiB0090: successfully identified\n"); + memcpy(&fe->ops.tuner_ops, &dib0090_ops, sizeof(struct dvb_tuner_ops)); + + return fe; + free_mem: + kfree(st); + fe->tuner_priv = NULL; + return NULL; +} + +EXPORT_SYMBOL(dib0090_register); + +struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config) +{ + struct dib0090_fw_state *st = kzalloc(sizeof(struct dib0090_fw_state), GFP_KERNEL); + if (st == NULL) + return NULL; + + st->config = config; + st->i2c = i2c; + st->fe = fe; + mutex_init(&st->i2c_buffer_lock); + fe->tuner_priv = st; + + if (dib0090_fw_reset_digital(fe, st->config) != 0) + goto free_mem; + + dprintk("DiB0090 FW: successfully identified"); + memcpy(&fe->ops.tuner_ops, &dib0090_fw_ops, sizeof(struct dvb_tuner_ops)); + + return fe; +free_mem: + kfree(st); + fe->tuner_priv = NULL; + return NULL; +} +EXPORT_SYMBOL(dib0090_fw_register); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_AUTHOR("Olivier Grenie "); +MODULE_DESCRIPTION("Driver for the DiBcom 0090 base-band RF Tuner"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dib0090.h b/drivers/media/dvb-frontends/dib0090.h new file mode 100644 index 00000000..6a090954 --- /dev/null +++ b/drivers/media/dvb-frontends/dib0090.h @@ -0,0 +1,187 @@ +/* + * Linux-DVB Driver for DiBcom's DiB0090 base-band RF Tuner. + * + * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#ifndef DIB0090_H +#define DIB0090_H + +struct dvb_frontend; +struct i2c_adapter; + +#define DEFAULT_DIB0090_I2C_ADDRESS 0x60 + +struct dib0090_io_config { + u32 clock_khz; + + u8 pll_bypass:1; + u8 pll_range:1; + u8 pll_prediv:6; + u8 pll_loopdiv:6; + + u8 adc_clock_ratio; /* valid is 8, 7 ,6 */ + u16 pll_int_loop_filt; +}; + +struct dib0090_wbd_slope { + u16 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u16 slope_cold; + u16 offset_cold; + u16 slope_hot; + u16 offset_hot; + u8 wbd_gain; +}; + +struct dib0090_low_if_offset_table { + int std; + u32 RF_freq; + s32 offset_khz; +}; + +struct dib0090_config { + struct dib0090_io_config io; + int (*reset) (struct dvb_frontend *, int); + int (*sleep) (struct dvb_frontend *, int); + + /* offset in kHz */ + int freq_offset_khz_uhf; + int freq_offset_khz_vhf; + + int (*get_adc_power) (struct dvb_frontend *); + + u8 clkouttobamse:1; /* activate or deactivate clock output */ + u8 analog_output; + + u8 i2c_address; + /* add drives and other things if necessary */ + u16 wbd_vhf_offset; + u16 wbd_cband_offset; + u8 use_pwm_agc; + u8 clkoutdrive; + + u8 ls_cfg_pad_drv; + u8 data_tx_drv; + + u8 in_soc; + const struct dib0090_low_if_offset_table *low_if; + u8 fref_clock_ratio; + u16 force_cband_input; + struct dib0090_wbd_slope *wbd; + u8 is_dib7090e; + u8 force_crystal_mode; +}; + +#if IS_ENABLED(CONFIG_DVB_TUNER_DIB0090) +extern struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config); +extern struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config); +extern void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast); +extern void dib0090_pwm_gain_reset(struct dvb_frontend *fe); +extern u16 dib0090_get_wbd_target(struct dvb_frontend *tuner); +extern u16 dib0090_get_wbd_offset(struct dvb_frontend *fe); +extern int dib0090_gain_control(struct dvb_frontend *fe); +extern enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe); +extern int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state); +extern void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt); +extern void dib0090_set_dc_servo(struct dvb_frontend *fe, u8 DC_servo_cutoff); +extern int dib0090_set_switch(struct dvb_frontend *fe, u8 sw1, u8 sw2, u8 sw3); +extern int dib0090_set_vga(struct dvb_frontend *fe, u8 onoff); +extern int dib0090_update_rframp_7090(struct dvb_frontend *fe, + u8 cfg_sensitivity); +extern int dib0090_update_tuning_table_7090(struct dvb_frontend *fe, + u8 cfg_sensitivity); +#else +static inline struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0090_config *config) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline void dib0090_pwm_gain_reset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline u16 dib0090_get_wbd_target(struct dvb_frontend *tuner) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline u16 dib0090_get_wbd_offset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline int dib0090_gain_control(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return CT_DONE; +} + +static inline int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline void dib0090_set_dc_servo(struct dvb_frontend *fe, u8 DC_servo_cutoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline int dib0090_set_switch(struct dvb_frontend *fe, + u8 sw1, u8 sw2, u8 sw3) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib0090_set_vga(struct dvb_frontend *fe, u8 onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib0090_update_rframp_7090(struct dvb_frontend *fe, + u8 cfg_sensitivity) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib0090_update_tuning_table_7090(struct dvb_frontend *fe, + u8 cfg_sensitivity) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/dib3000.h b/drivers/media/dvb-frontends/dib3000.h new file mode 100644 index 00000000..9b6c3bbc --- /dev/null +++ b/drivers/media/dvb-frontends/dib3000.h @@ -0,0 +1,56 @@ +/* + * public header file of the frontend drivers for mobile DVB-T demodulators + * DiBcom 3000M-B and DiBcom 3000P/M-C (http://www.dibcom.fr/) + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * based on GPL code from DibCom, which has + * + * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + * Acknowledgements + * + * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver + * sources, on which this driver (and the dvb-dibusb) are based. + * + * see Documentation/dvb/README.dvb-usb for more information + * + */ + +#ifndef DIB3000_H +#define DIB3000_H + +#include + +struct dib3000_config +{ + /* the demodulator's i2c address */ + u8 demod_address; +}; + +struct dib_fe_xfer_ops +{ + /* pid and transfer handling is done in the demodulator */ + int (*pid_parse)(struct dvb_frontend *fe, int onoff); + int (*fifo_ctrl)(struct dvb_frontend *fe, int onoff); + int (*pid_ctrl)(struct dvb_frontend *fe, int index, int pid, int onoff); + int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl); +}; + +#if IS_ENABLED(CONFIG_DVB_DIB3000MB) +extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config, + struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops); +#else +static inline struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config, + struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_DIB3000MB + +#endif // DIB3000_H diff --git a/drivers/media/dvb-frontends/dib3000mb.c b/drivers/media/dvb-frontends/dib3000mb.c new file mode 100644 index 00000000..af91e0c9 --- /dev/null +++ b/drivers/media/dvb-frontends/dib3000mb.c @@ -0,0 +1,829 @@ +/* + * Frontend driver for mobile DVB-T demodulator DiBcom 3000M-B + * DiBcom (http://www.dibcom.fr/) + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * based on GPL code from DibCom, which has + * + * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + * Acknowledgements + * + * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver + * sources, on which this driver (and the dvb-dibusb) are based. + * + * see Documentation/dvb/README.dvb-usb for more information + * + */ + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" + +#include "dib3000.h" +#include "dib3000mb_priv.h" + +/* Version information */ +#define DRIVER_VERSION "0.1" +#define DRIVER_DESC "DiBcom 3000M-B DVB-T demodulator" +#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe (|-able))."); + +#define deb_info(args...) dprintk(0x01,args) +#define deb_i2c(args...) dprintk(0x02,args) +#define deb_srch(args...) dprintk(0x04,args) +#define deb_info(args...) dprintk(0x01,args) +#define deb_xfer(args...) dprintk(0x02,args) +#define deb_setf(args...) dprintk(0x04,args) +#define deb_getf(args...) dprintk(0x08,args) + +static int dib3000_read_reg(struct dib3000_state *state, u16 reg) +{ + u8 wb[] = { ((reg >> 8) | 0x80) & 0xff, reg & 0xff }; + u8 rb[2]; + struct i2c_msg msg[] = { + { .addr = state->config.demod_address, .flags = 0, .buf = wb, .len = 2 }, + { .addr = state->config.demod_address, .flags = I2C_M_RD, .buf = rb, .len = 2 }, + }; + + if (i2c_transfer(state->i2c, msg, 2) != 2) + deb_i2c("i2c read error\n"); + + deb_i2c("reading i2c bus (reg: %5d 0x%04x, val: %5d 0x%04x)\n",reg,reg, + (rb[0] << 8) | rb[1],(rb[0] << 8) | rb[1]); + + return (rb[0] << 8) | rb[1]; +} + +static int dib3000_write_reg(struct dib3000_state *state, u16 reg, u16 val) +{ + u8 b[] = { + (reg >> 8) & 0xff, reg & 0xff, + (val >> 8) & 0xff, val & 0xff, + }; + struct i2c_msg msg[] = { + { .addr = state->config.demod_address, .flags = 0, .buf = b, .len = 4 } + }; + deb_i2c("writing i2c bus (reg: %5d 0x%04x, val: %5d 0x%04x)\n",reg,reg,val,val); + + return i2c_transfer(state->i2c,msg, 1) != 1 ? -EREMOTEIO : 0; +} + +static int dib3000_search_status(u16 irq,u16 lock) +{ + if (irq & 0x02) { + if (lock & 0x01) { + deb_srch("auto search succeeded\n"); + return 1; // auto search succeeded + } else { + deb_srch("auto search not successful\n"); + return 0; // auto search failed + } + } else if (irq & 0x01) { + deb_srch("auto search failed\n"); + return 0; // auto search failed + } + return -1; // try again +} + +/* for auto search */ +static u16 dib3000_seq[2][2][2] = /* fft,gua, inv */ + { /* fft */ + { /* gua */ + { 0, 1 }, /* 0 0 { 0,1 } */ + { 3, 9 }, /* 0 1 { 0,1 } */ + }, + { + { 2, 5 }, /* 1 0 { 0,1 } */ + { 6, 11 }, /* 1 1 { 0,1 } */ + } + }; + +static int dib3000mb_get_frontend(struct dvb_frontend* fe); + +static int dib3000mb_set_frontend(struct dvb_frontend *fe, int tuner) +{ + struct dib3000_state* state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + fe_code_rate_t fe_cr = FEC_NONE; + int search_state, seq; + + if (tuner && fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + + deb_setf("bandwidth: "); + switch (c->bandwidth_hz) { + case 8000000: + deb_setf("8 MHz\n"); + wr_foreach(dib3000mb_reg_timing_freq, dib3000mb_timing_freq[2]); + wr_foreach(dib3000mb_reg_bandwidth, dib3000mb_bandwidth_8mhz); + break; + case 7000000: + deb_setf("7 MHz\n"); + wr_foreach(dib3000mb_reg_timing_freq, dib3000mb_timing_freq[1]); + wr_foreach(dib3000mb_reg_bandwidth, dib3000mb_bandwidth_7mhz); + break; + case 6000000: + deb_setf("6 MHz\n"); + wr_foreach(dib3000mb_reg_timing_freq, dib3000mb_timing_freq[0]); + wr_foreach(dib3000mb_reg_bandwidth, dib3000mb_bandwidth_6mhz); + break; + case 0: + return -EOPNOTSUPP; + default: + err("unknown bandwidth value."); + return -EINVAL; + } + } + wr(DIB3000MB_REG_LOCK1_MASK, DIB3000MB_LOCK1_SEARCH_4); + + deb_setf("transmission mode: "); + switch (c->transmission_mode) { + case TRANSMISSION_MODE_2K: + deb_setf("2k\n"); + wr(DIB3000MB_REG_FFT, DIB3000_TRANSMISSION_MODE_2K); + break; + case TRANSMISSION_MODE_8K: + deb_setf("8k\n"); + wr(DIB3000MB_REG_FFT, DIB3000_TRANSMISSION_MODE_8K); + break; + case TRANSMISSION_MODE_AUTO: + deb_setf("auto\n"); + break; + default: + return -EINVAL; + } + + deb_setf("guard: "); + switch (c->guard_interval) { + case GUARD_INTERVAL_1_32: + deb_setf("1_32\n"); + wr(DIB3000MB_REG_GUARD_TIME, DIB3000_GUARD_TIME_1_32); + break; + case GUARD_INTERVAL_1_16: + deb_setf("1_16\n"); + wr(DIB3000MB_REG_GUARD_TIME, DIB3000_GUARD_TIME_1_16); + break; + case GUARD_INTERVAL_1_8: + deb_setf("1_8\n"); + wr(DIB3000MB_REG_GUARD_TIME, DIB3000_GUARD_TIME_1_8); + break; + case GUARD_INTERVAL_1_4: + deb_setf("1_4\n"); + wr(DIB3000MB_REG_GUARD_TIME, DIB3000_GUARD_TIME_1_4); + break; + case GUARD_INTERVAL_AUTO: + deb_setf("auto\n"); + break; + default: + return -EINVAL; + } + + deb_setf("inversion: "); + switch (c->inversion) { + case INVERSION_OFF: + deb_setf("off\n"); + wr(DIB3000MB_REG_DDS_INV, DIB3000_DDS_INVERSION_OFF); + break; + case INVERSION_AUTO: + deb_setf("auto "); + break; + case INVERSION_ON: + deb_setf("on\n"); + wr(DIB3000MB_REG_DDS_INV, DIB3000_DDS_INVERSION_ON); + break; + default: + return -EINVAL; + } + + deb_setf("modulation: "); + switch (c->modulation) { + case QPSK: + deb_setf("qpsk\n"); + wr(DIB3000MB_REG_QAM, DIB3000_CONSTELLATION_QPSK); + break; + case QAM_16: + deb_setf("qam16\n"); + wr(DIB3000MB_REG_QAM, DIB3000_CONSTELLATION_16QAM); + break; + case QAM_64: + deb_setf("qam64\n"); + wr(DIB3000MB_REG_QAM, DIB3000_CONSTELLATION_64QAM); + break; + case QAM_AUTO: + break; + default: + return -EINVAL; + } + deb_setf("hierarchy: "); + switch (c->hierarchy) { + case HIERARCHY_NONE: + deb_setf("none "); + /* fall through */ + case HIERARCHY_1: + deb_setf("alpha=1\n"); + wr(DIB3000MB_REG_VIT_ALPHA, DIB3000_ALPHA_1); + break; + case HIERARCHY_2: + deb_setf("alpha=2\n"); + wr(DIB3000MB_REG_VIT_ALPHA, DIB3000_ALPHA_2); + break; + case HIERARCHY_4: + deb_setf("alpha=4\n"); + wr(DIB3000MB_REG_VIT_ALPHA, DIB3000_ALPHA_4); + break; + case HIERARCHY_AUTO: + deb_setf("alpha=auto\n"); + break; + default: + return -EINVAL; + } + + deb_setf("hierarchy: "); + if (c->hierarchy == HIERARCHY_NONE) { + deb_setf("none\n"); + wr(DIB3000MB_REG_VIT_HRCH, DIB3000_HRCH_OFF); + wr(DIB3000MB_REG_VIT_HP, DIB3000_SELECT_HP); + fe_cr = c->code_rate_HP; + } else if (c->hierarchy != HIERARCHY_AUTO) { + deb_setf("on\n"); + wr(DIB3000MB_REG_VIT_HRCH, DIB3000_HRCH_ON); + wr(DIB3000MB_REG_VIT_HP, DIB3000_SELECT_LP); + fe_cr = c->code_rate_LP; + } + deb_setf("fec: "); + switch (fe_cr) { + case FEC_1_2: + deb_setf("1_2\n"); + wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_1_2); + break; + case FEC_2_3: + deb_setf("2_3\n"); + wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_2_3); + break; + case FEC_3_4: + deb_setf("3_4\n"); + wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_3_4); + break; + case FEC_5_6: + deb_setf("5_6\n"); + wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_5_6); + break; + case FEC_7_8: + deb_setf("7_8\n"); + wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_7_8); + break; + case FEC_NONE: + deb_setf("none "); + break; + case FEC_AUTO: + deb_setf("auto\n"); + break; + default: + return -EINVAL; + } + + seq = dib3000_seq + [c->transmission_mode == TRANSMISSION_MODE_AUTO] + [c->guard_interval == GUARD_INTERVAL_AUTO] + [c->inversion == INVERSION_AUTO]; + + deb_setf("seq? %d\n", seq); + + wr(DIB3000MB_REG_SEQ, seq); + + wr(DIB3000MB_REG_ISI, seq ? DIB3000MB_ISI_INHIBIT : DIB3000MB_ISI_ACTIVATE); + + if (c->transmission_mode == TRANSMISSION_MODE_2K) { + if (c->guard_interval == GUARD_INTERVAL_1_8) { + wr(DIB3000MB_REG_SYNC_IMPROVEMENT, DIB3000MB_SYNC_IMPROVE_2K_1_8); + } else { + wr(DIB3000MB_REG_SYNC_IMPROVEMENT, DIB3000MB_SYNC_IMPROVE_DEFAULT); + } + + wr(DIB3000MB_REG_UNK_121, DIB3000MB_UNK_121_2K); + } else { + wr(DIB3000MB_REG_UNK_121, DIB3000MB_UNK_121_DEFAULT); + } + + wr(DIB3000MB_REG_MOBILE_ALGO, DIB3000MB_MOBILE_ALGO_OFF); + wr(DIB3000MB_REG_MOBILE_MODE_QAM, DIB3000MB_MOBILE_MODE_QAM_OFF); + wr(DIB3000MB_REG_MOBILE_MODE, DIB3000MB_MOBILE_MODE_OFF); + + wr_foreach(dib3000mb_reg_agc_bandwidth, dib3000mb_agc_bandwidth_high); + + wr(DIB3000MB_REG_ISI, DIB3000MB_ISI_ACTIVATE); + + wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_AGC + DIB3000MB_RESTART_CTRL); + wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_OFF); + + /* wait for AGC lock */ + msleep(70); + + wr_foreach(dib3000mb_reg_agc_bandwidth, dib3000mb_agc_bandwidth_low); + + /* something has to be auto searched */ + if (c->modulation == QAM_AUTO || + c->hierarchy == HIERARCHY_AUTO || + fe_cr == FEC_AUTO || + c->inversion == INVERSION_AUTO) { + int as_count=0; + + deb_setf("autosearch enabled.\n"); + + wr(DIB3000MB_REG_ISI, DIB3000MB_ISI_INHIBIT); + + wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_AUTO_SEARCH); + wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_OFF); + + while ((search_state = + dib3000_search_status( + rd(DIB3000MB_REG_AS_IRQ_PENDING), + rd(DIB3000MB_REG_LOCK2_VALUE))) < 0 && as_count++ < 100) + msleep(1); + + deb_setf("search_state after autosearch %d after %d checks\n",search_state,as_count); + + if (search_state == 1) { + if (dib3000mb_get_frontend(fe) == 0) { + deb_setf("reading tuning data from frontend succeeded.\n"); + return dib3000mb_set_frontend(fe, 0); + } + } + + } else { + wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_CTRL); + wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_OFF); + } + + return 0; +} + +static int dib3000mb_fe_init(struct dvb_frontend* fe, int mobile_mode) +{ + struct dib3000_state* state = fe->demodulator_priv; + + deb_info("dib3000mb is getting up.\n"); + wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_UP); + + wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_AGC); + + wr(DIB3000MB_REG_RESET_DEVICE, DIB3000MB_RESET_DEVICE); + wr(DIB3000MB_REG_RESET_DEVICE, DIB3000MB_RESET_DEVICE_RST); + + wr(DIB3000MB_REG_CLOCK, DIB3000MB_CLOCK_DEFAULT); + + wr(DIB3000MB_REG_ELECT_OUT_MODE, DIB3000MB_ELECT_OUT_MODE_ON); + + wr(DIB3000MB_REG_DDS_FREQ_MSB, DIB3000MB_DDS_FREQ_MSB); + wr(DIB3000MB_REG_DDS_FREQ_LSB, DIB3000MB_DDS_FREQ_LSB); + + wr_foreach(dib3000mb_reg_timing_freq, dib3000mb_timing_freq[2]); + + wr_foreach(dib3000mb_reg_impulse_noise, + dib3000mb_impulse_noise_values[DIB3000MB_IMPNOISE_OFF]); + + wr_foreach(dib3000mb_reg_agc_gain, dib3000mb_default_agc_gain); + + wr(DIB3000MB_REG_PHASE_NOISE, DIB3000MB_PHASE_NOISE_DEFAULT); + + wr_foreach(dib3000mb_reg_phase_noise, dib3000mb_default_noise_phase); + + wr_foreach(dib3000mb_reg_lock_duration, dib3000mb_default_lock_duration); + + wr_foreach(dib3000mb_reg_agc_bandwidth, dib3000mb_agc_bandwidth_low); + + wr(DIB3000MB_REG_LOCK0_MASK, DIB3000MB_LOCK0_DEFAULT); + wr(DIB3000MB_REG_LOCK1_MASK, DIB3000MB_LOCK1_SEARCH_4); + wr(DIB3000MB_REG_LOCK2_MASK, DIB3000MB_LOCK2_DEFAULT); + wr(DIB3000MB_REG_SEQ, dib3000_seq[1][1][1]); + + wr_foreach(dib3000mb_reg_bandwidth, dib3000mb_bandwidth_8mhz); + + wr(DIB3000MB_REG_UNK_68, DIB3000MB_UNK_68); + wr(DIB3000MB_REG_UNK_69, DIB3000MB_UNK_69); + wr(DIB3000MB_REG_UNK_71, DIB3000MB_UNK_71); + wr(DIB3000MB_REG_UNK_77, DIB3000MB_UNK_77); + wr(DIB3000MB_REG_UNK_78, DIB3000MB_UNK_78); + wr(DIB3000MB_REG_ISI, DIB3000MB_ISI_INHIBIT); + wr(DIB3000MB_REG_UNK_92, DIB3000MB_UNK_92); + wr(DIB3000MB_REG_UNK_96, DIB3000MB_UNK_96); + wr(DIB3000MB_REG_UNK_97, DIB3000MB_UNK_97); + wr(DIB3000MB_REG_UNK_106, DIB3000MB_UNK_106); + wr(DIB3000MB_REG_UNK_107, DIB3000MB_UNK_107); + wr(DIB3000MB_REG_UNK_108, DIB3000MB_UNK_108); + wr(DIB3000MB_REG_UNK_122, DIB3000MB_UNK_122); + wr(DIB3000MB_REG_MOBILE_MODE_QAM, DIB3000MB_MOBILE_MODE_QAM_OFF); + wr(DIB3000MB_REG_BERLEN, DIB3000MB_BERLEN_DEFAULT); + + wr_foreach(dib3000mb_reg_filter_coeffs, dib3000mb_filter_coeffs); + + wr(DIB3000MB_REG_MOBILE_ALGO, DIB3000MB_MOBILE_ALGO_ON); + wr(DIB3000MB_REG_MULTI_DEMOD_MSB, DIB3000MB_MULTI_DEMOD_MSB); + wr(DIB3000MB_REG_MULTI_DEMOD_LSB, DIB3000MB_MULTI_DEMOD_LSB); + + wr(DIB3000MB_REG_OUTPUT_MODE, DIB3000MB_OUTPUT_MODE_SLAVE); + + wr(DIB3000MB_REG_FIFO_142, DIB3000MB_FIFO_142); + wr(DIB3000MB_REG_MPEG2_OUT_MODE, DIB3000MB_MPEG2_OUT_MODE_188); + wr(DIB3000MB_REG_PID_PARSE, DIB3000MB_PID_PARSE_ACTIVATE); + wr(DIB3000MB_REG_FIFO, DIB3000MB_FIFO_INHIBIT); + wr(DIB3000MB_REG_FIFO_146, DIB3000MB_FIFO_146); + wr(DIB3000MB_REG_FIFO_147, DIB3000MB_FIFO_147); + + wr(DIB3000MB_REG_DATA_IN_DIVERSITY, DIB3000MB_DATA_DIVERSITY_IN_OFF); + + return 0; +} + +static int dib3000mb_get_frontend(struct dvb_frontend* fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dib3000_state* state = fe->demodulator_priv; + fe_code_rate_t *cr; + u16 tps_val; + int inv_test1,inv_test2; + u32 dds_val, threshold = 0x800000; + + if (!rd(DIB3000MB_REG_TPS_LOCK)) + return 0; + + dds_val = ((rd(DIB3000MB_REG_DDS_VALUE_MSB) & 0xff) << 16) + rd(DIB3000MB_REG_DDS_VALUE_LSB); + deb_getf("DDS_VAL: %x %x %x",dds_val, rd(DIB3000MB_REG_DDS_VALUE_MSB), rd(DIB3000MB_REG_DDS_VALUE_LSB)); + if (dds_val < threshold) + inv_test1 = 0; + else if (dds_val == threshold) + inv_test1 = 1; + else + inv_test1 = 2; + + dds_val = ((rd(DIB3000MB_REG_DDS_FREQ_MSB) & 0xff) << 16) + rd(DIB3000MB_REG_DDS_FREQ_LSB); + deb_getf("DDS_FREQ: %x %x %x",dds_val, rd(DIB3000MB_REG_DDS_FREQ_MSB), rd(DIB3000MB_REG_DDS_FREQ_LSB)); + if (dds_val < threshold) + inv_test2 = 0; + else if (dds_val == threshold) + inv_test2 = 1; + else + inv_test2 = 2; + + c->inversion = + ((inv_test2 == 2) && (inv_test1==1 || inv_test1==0)) || + ((inv_test2 == 0) && (inv_test1==1 || inv_test1==2)) ? + INVERSION_ON : INVERSION_OFF; + + deb_getf("inversion %d %d, %d\n", inv_test2, inv_test1, c->inversion); + + switch ((tps_val = rd(DIB3000MB_REG_TPS_QAM))) { + case DIB3000_CONSTELLATION_QPSK: + deb_getf("QPSK "); + c->modulation = QPSK; + break; + case DIB3000_CONSTELLATION_16QAM: + deb_getf("QAM16 "); + c->modulation = QAM_16; + break; + case DIB3000_CONSTELLATION_64QAM: + deb_getf("QAM64 "); + c->modulation = QAM_64; + break; + default: + err("Unexpected constellation returned by TPS (%d)", tps_val); + break; + } + deb_getf("TPS: %d\n", tps_val); + + if (rd(DIB3000MB_REG_TPS_HRCH)) { + deb_getf("HRCH ON\n"); + cr = &c->code_rate_LP; + c->code_rate_HP = FEC_NONE; + switch ((tps_val = rd(DIB3000MB_REG_TPS_VIT_ALPHA))) { + case DIB3000_ALPHA_0: + deb_getf("HIERARCHY_NONE "); + c->hierarchy = HIERARCHY_NONE; + break; + case DIB3000_ALPHA_1: + deb_getf("HIERARCHY_1 "); + c->hierarchy = HIERARCHY_1; + break; + case DIB3000_ALPHA_2: + deb_getf("HIERARCHY_2 "); + c->hierarchy = HIERARCHY_2; + break; + case DIB3000_ALPHA_4: + deb_getf("HIERARCHY_4 "); + c->hierarchy = HIERARCHY_4; + break; + default: + err("Unexpected ALPHA value returned by TPS (%d)", tps_val); + break; + } + deb_getf("TPS: %d\n", tps_val); + + tps_val = rd(DIB3000MB_REG_TPS_CODE_RATE_LP); + } else { + deb_getf("HRCH OFF\n"); + cr = &c->code_rate_HP; + c->code_rate_LP = FEC_NONE; + c->hierarchy = HIERARCHY_NONE; + + tps_val = rd(DIB3000MB_REG_TPS_CODE_RATE_HP); + } + + switch (tps_val) { + case DIB3000_FEC_1_2: + deb_getf("FEC_1_2 "); + *cr = FEC_1_2; + break; + case DIB3000_FEC_2_3: + deb_getf("FEC_2_3 "); + *cr = FEC_2_3; + break; + case DIB3000_FEC_3_4: + deb_getf("FEC_3_4 "); + *cr = FEC_3_4; + break; + case DIB3000_FEC_5_6: + deb_getf("FEC_5_6 "); + *cr = FEC_4_5; + break; + case DIB3000_FEC_7_8: + deb_getf("FEC_7_8 "); + *cr = FEC_7_8; + break; + default: + err("Unexpected FEC returned by TPS (%d)", tps_val); + break; + } + deb_getf("TPS: %d\n",tps_val); + + switch ((tps_val = rd(DIB3000MB_REG_TPS_GUARD_TIME))) { + case DIB3000_GUARD_TIME_1_32: + deb_getf("GUARD_INTERVAL_1_32 "); + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case DIB3000_GUARD_TIME_1_16: + deb_getf("GUARD_INTERVAL_1_16 "); + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case DIB3000_GUARD_TIME_1_8: + deb_getf("GUARD_INTERVAL_1_8 "); + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case DIB3000_GUARD_TIME_1_4: + deb_getf("GUARD_INTERVAL_1_4 "); + c->guard_interval = GUARD_INTERVAL_1_4; + break; + default: + err("Unexpected Guard Time returned by TPS (%d)", tps_val); + break; + } + deb_getf("TPS: %d\n", tps_val); + + switch ((tps_val = rd(DIB3000MB_REG_TPS_FFT))) { + case DIB3000_TRANSMISSION_MODE_2K: + deb_getf("TRANSMISSION_MODE_2K "); + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case DIB3000_TRANSMISSION_MODE_8K: + deb_getf("TRANSMISSION_MODE_8K "); + c->transmission_mode = TRANSMISSION_MODE_8K; + break; + default: + err("unexpected transmission mode return by TPS (%d)", tps_val); + break; + } + deb_getf("TPS: %d\n", tps_val); + + return 0; +} + +static int dib3000mb_read_status(struct dvb_frontend* fe, fe_status_t *stat) +{ + struct dib3000_state* state = fe->demodulator_priv; + + *stat = 0; + + if (rd(DIB3000MB_REG_AGC_LOCK)) + *stat |= FE_HAS_SIGNAL; + if (rd(DIB3000MB_REG_CARRIER_LOCK)) + *stat |= FE_HAS_CARRIER; + if (rd(DIB3000MB_REG_VIT_LCK)) + *stat |= FE_HAS_VITERBI; + if (rd(DIB3000MB_REG_TS_SYNC_LOCK)) + *stat |= (FE_HAS_SYNC | FE_HAS_LOCK); + + deb_getf("actual status is %2x\n",*stat); + + deb_getf("autoval: tps: %d, qam: %d, hrch: %d, alpha: %d, hp: %d, lp: %d, guard: %d, fft: %d cell: %d\n", + rd(DIB3000MB_REG_TPS_LOCK), + rd(DIB3000MB_REG_TPS_QAM), + rd(DIB3000MB_REG_TPS_HRCH), + rd(DIB3000MB_REG_TPS_VIT_ALPHA), + rd(DIB3000MB_REG_TPS_CODE_RATE_HP), + rd(DIB3000MB_REG_TPS_CODE_RATE_LP), + rd(DIB3000MB_REG_TPS_GUARD_TIME), + rd(DIB3000MB_REG_TPS_FFT), + rd(DIB3000MB_REG_TPS_CELL_ID)); + + //*stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + return 0; +} + +static int dib3000mb_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + struct dib3000_state* state = fe->demodulator_priv; + + *ber = ((rd(DIB3000MB_REG_BER_MSB) << 16) | rd(DIB3000MB_REG_BER_LSB)); + return 0; +} + +/* see dib3000-watch dvb-apps for exact calcuations of signal_strength and snr */ +static int dib3000mb_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct dib3000_state* state = fe->demodulator_priv; + + *strength = rd(DIB3000MB_REG_SIGNAL_POWER) * 0xffff / 0x170; + return 0; +} + +static int dib3000mb_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct dib3000_state* state = fe->demodulator_priv; + short sigpow = rd(DIB3000MB_REG_SIGNAL_POWER); + int icipow = ((rd(DIB3000MB_REG_NOISE_POWER_MSB) & 0xff) << 16) | + rd(DIB3000MB_REG_NOISE_POWER_LSB); + *snr = (sigpow << 8) / ((icipow > 0) ? icipow : 1); + return 0; +} + +static int dib3000mb_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + struct dib3000_state* state = fe->demodulator_priv; + + *unc = rd(DIB3000MB_REG_PACKET_ERROR_RATE); + return 0; +} + +static int dib3000mb_sleep(struct dvb_frontend* fe) +{ + struct dib3000_state* state = fe->demodulator_priv; + deb_info("dib3000mb is going to bed.\n"); + wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_DOWN); + return 0; +} + +static int dib3000mb_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int dib3000mb_fe_init_nonmobile(struct dvb_frontend* fe) +{ + return dib3000mb_fe_init(fe, 0); +} + +static int dib3000mb_set_frontend_and_tuner(struct dvb_frontend *fe) +{ + return dib3000mb_set_frontend(fe, 1); +} + +static void dib3000mb_release(struct dvb_frontend* fe) +{ + struct dib3000_state *state = fe->demodulator_priv; + kfree(state); +} + +/* pid filter and transfer stuff */ +static int dib3000mb_pid_control(struct dvb_frontend *fe,int index, int pid,int onoff) +{ + struct dib3000_state *state = fe->demodulator_priv; + pid = (onoff ? pid | DIB3000_ACTIVATE_PID_FILTERING : 0); + wr(index+DIB3000MB_REG_FIRST_PID,pid); + return 0; +} + +static int dib3000mb_fifo_control(struct dvb_frontend *fe, int onoff) +{ + struct dib3000_state *state = fe->demodulator_priv; + + deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling"); + if (onoff) { + wr(DIB3000MB_REG_FIFO, DIB3000MB_FIFO_ACTIVATE); + } else { + wr(DIB3000MB_REG_FIFO, DIB3000MB_FIFO_INHIBIT); + } + return 0; +} + +static int dib3000mb_pid_parse(struct dvb_frontend *fe, int onoff) +{ + struct dib3000_state *state = fe->demodulator_priv; + deb_xfer("%s pid parsing\n",onoff ? "enabling" : "disabling"); + wr(DIB3000MB_REG_PID_PARSE,onoff); + return 0; +} + +static int dib3000mb_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr) +{ + struct dib3000_state *state = fe->demodulator_priv; + if (onoff) { + wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr)); + } else { + wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_DISABLE(pll_addr)); + } + return 0; +} + +static struct dvb_frontend_ops dib3000mb_ops; + +struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config, + struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops) +{ + struct dib3000_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct dib3000_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = i2c; + memcpy(&state->config,config,sizeof(struct dib3000_config)); + + /* check for the correct demod */ + if (rd(DIB3000_REG_MANUFACTOR_ID) != DIB3000_I2C_ID_DIBCOM) + goto error; + + if (rd(DIB3000_REG_DEVICE_ID) != DIB3000MB_DEVICE_ID) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &dib3000mb_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + /* set the xfer operations */ + xfer_ops->pid_parse = dib3000mb_pid_parse; + xfer_ops->fifo_ctrl = dib3000mb_fifo_control; + xfer_ops->pid_ctrl = dib3000mb_pid_control; + xfer_ops->tuner_pass_ctrl = dib3000mb_tuner_pass_ctrl; + + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops dib3000mb_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "DiBcom 3000M-B DVB-T", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib3000mb_release, + + .init = dib3000mb_fe_init_nonmobile, + .sleep = dib3000mb_sleep, + + .set_frontend = dib3000mb_set_frontend_and_tuner, + .get_frontend = dib3000mb_get_frontend, + .get_tune_settings = dib3000mb_fe_get_tune_settings, + + .read_status = dib3000mb_read_status, + .read_ber = dib3000mb_read_ber, + .read_signal_strength = dib3000mb_read_signal_strength, + .read_snr = dib3000mb_read_snr, + .read_ucblocks = dib3000mb_read_unc_blocks, +}; + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(dib3000mb_attach); diff --git a/drivers/media/dvb-frontends/dib3000mb_priv.h b/drivers/media/dvb-frontends/dib3000mb_priv.h new file mode 100644 index 00000000..9dc235aa --- /dev/null +++ b/drivers/media/dvb-frontends/dib3000mb_priv.h @@ -0,0 +1,556 @@ +/* + * dib3000mb_priv.h + * + * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + * for more information see dib3000mb.c . + */ + +#ifndef __DIB3000MB_PRIV_H_INCLUDED__ +#define __DIB3000MB_PRIV_H_INCLUDED__ + +/* info and err, taken from usb.h, if there is anything available like by default. */ +#define err(format, arg...) printk(KERN_ERR "dib3000: " format "\n" , ## arg) +#define info(format, arg...) printk(KERN_INFO "dib3000: " format "\n" , ## arg) +#define warn(format, arg...) printk(KERN_WARNING "dib3000: " format "\n" , ## arg) + +/* handy shortcuts */ +#define rd(reg) dib3000_read_reg(state,reg) + +#define wr(reg,val) if (dib3000_write_reg(state,reg,val)) \ + { err("while sending 0x%04x to 0x%04x.",val,reg); return -EREMOTEIO; } + +#define wr_foreach(a,v) { int i; \ + if (sizeof(a) != sizeof(v)) \ + err("sizeof: %zu %zu is different",sizeof(a),sizeof(v));\ + for (i=0; i < sizeof(a)/sizeof(u16); i++) \ + wr(a[i],v[i]); \ + } + +#define set_or(reg,val) wr(reg,rd(reg) | val) + +#define set_and(reg,val) wr(reg,rd(reg) & val) + +/* debug */ + +#define dprintk(level,args...) \ + do { if ((debug & level)) { printk(args); } } while (0) + +/* mask for enabling a specific pid for the pid_filter */ +#define DIB3000_ACTIVATE_PID_FILTERING (0x2000) + +/* common values for tuning */ +#define DIB3000_ALPHA_0 ( 0) +#define DIB3000_ALPHA_1 ( 1) +#define DIB3000_ALPHA_2 ( 2) +#define DIB3000_ALPHA_4 ( 4) + +#define DIB3000_CONSTELLATION_QPSK ( 0) +#define DIB3000_CONSTELLATION_16QAM ( 1) +#define DIB3000_CONSTELLATION_64QAM ( 2) + +#define DIB3000_GUARD_TIME_1_32 ( 0) +#define DIB3000_GUARD_TIME_1_16 ( 1) +#define DIB3000_GUARD_TIME_1_8 ( 2) +#define DIB3000_GUARD_TIME_1_4 ( 3) + +#define DIB3000_TRANSMISSION_MODE_2K ( 0) +#define DIB3000_TRANSMISSION_MODE_8K ( 1) + +#define DIB3000_SELECT_LP ( 0) +#define DIB3000_SELECT_HP ( 1) + +#define DIB3000_FEC_1_2 ( 1) +#define DIB3000_FEC_2_3 ( 2) +#define DIB3000_FEC_3_4 ( 3) +#define DIB3000_FEC_5_6 ( 5) +#define DIB3000_FEC_7_8 ( 7) + +#define DIB3000_HRCH_OFF ( 0) +#define DIB3000_HRCH_ON ( 1) + +#define DIB3000_DDS_INVERSION_OFF ( 0) +#define DIB3000_DDS_INVERSION_ON ( 1) + +#define DIB3000_TUNER_WRITE_ENABLE(a) (0xffff & (a << 8)) +#define DIB3000_TUNER_WRITE_DISABLE(a) (0xffff & ((a << 8) | (1 << 7))) + +#define DIB3000_REG_MANUFACTOR_ID ( 1025) +#define DIB3000_I2C_ID_DIBCOM (0x01b3) + +#define DIB3000_REG_DEVICE_ID ( 1026) +#define DIB3000MB_DEVICE_ID (0x3000) +#define DIB3000MC_DEVICE_ID (0x3001) +#define DIB3000P_DEVICE_ID (0x3002) + +/* frontend state */ +struct dib3000_state { + struct i2c_adapter* i2c; + +/* configuration settings */ + struct dib3000_config config; + + struct dvb_frontend frontend; + int timing_offset; + int timing_offset_comp_done; + + u32 last_tuned_bw; + u32 last_tuned_freq; +}; + +/* register addresses and some of their default values */ + +/* restart subsystems */ +#define DIB3000MB_REG_RESTART ( 0) + +#define DIB3000MB_RESTART_OFF ( 0) +#define DIB3000MB_RESTART_AUTO_SEARCH (1 << 1) +#define DIB3000MB_RESTART_CTRL (1 << 2) +#define DIB3000MB_RESTART_AGC (1 << 3) + +/* FFT size */ +#define DIB3000MB_REG_FFT ( 1) + +/* Guard time */ +#define DIB3000MB_REG_GUARD_TIME ( 2) + +/* QAM */ +#define DIB3000MB_REG_QAM ( 3) + +/* Alpha coefficient high priority Viterbi algorithm */ +#define DIB3000MB_REG_VIT_ALPHA ( 4) + +/* spectrum inversion */ +#define DIB3000MB_REG_DDS_INV ( 5) + +/* DDS frequency value (IF position) ad ? values don't match reg_3000mb.txt */ +#define DIB3000MB_REG_DDS_FREQ_MSB ( 6) +#define DIB3000MB_REG_DDS_FREQ_LSB ( 7) +#define DIB3000MB_DDS_FREQ_MSB ( 178) +#define DIB3000MB_DDS_FREQ_LSB ( 8990) + +/* timing frequency (carrier spacing) */ +static u16 dib3000mb_reg_timing_freq[] = { 8,9 }; +static u16 dib3000mb_timing_freq[][2] = { + { 126 , 48873 }, /* 6 MHz */ + { 147 , 57019 }, /* 7 MHz */ + { 168 , 65164 }, /* 8 MHz */ +}; + +/* impulse noise parameter */ +/* 36 ??? */ + +static u16 dib3000mb_reg_impulse_noise[] = { 10,11,12,15,36 }; + +enum dib3000mb_impulse_noise_type { + DIB3000MB_IMPNOISE_OFF, + DIB3000MB_IMPNOISE_MOBILE, + DIB3000MB_IMPNOISE_FIXED, + DIB3000MB_IMPNOISE_DEFAULT +}; + +static u16 dib3000mb_impulse_noise_values[][5] = { + { 0x0000, 0x0004, 0x0014, 0x01ff, 0x0399 }, /* off */ + { 0x0001, 0x0004, 0x0014, 0x01ff, 0x037b }, /* mobile */ + { 0x0001, 0x0004, 0x0020, 0x01bd, 0x0399 }, /* fixed */ + { 0x0000, 0x0002, 0x000a, 0x01ff, 0x0399 }, /* default */ +}; + +/* + * Dual Automatic-Gain-Control + * - gains RF in tuner (AGC1) + * - gains IF after filtering (AGC2) + */ + +/* also from 16 to 18 */ +static u16 dib3000mb_reg_agc_gain[] = { + 19,20,21,22,23,24,25,26,27,28,29,30,31,32 +}; + +static u16 dib3000mb_default_agc_gain[] = + { 0x0001, 52429, 623, 128, 166, 195, 61, /* RF ??? */ + 0x0001, 53766, 38011, 0, 90, 33, 23 }; /* IF ??? */ + +/* phase noise */ +/* 36 is set when setting the impulse noise */ +static u16 dib3000mb_reg_phase_noise[] = { 33,34,35,37,38 }; + +static u16 dib3000mb_default_noise_phase[] = { 2, 544, 0, 5, 4 }; + +/* lock duration */ +static u16 dib3000mb_reg_lock_duration[] = { 39,40 }; +static u16 dib3000mb_default_lock_duration[] = { 135, 135 }; + +/* AGC loop bandwidth */ +static u16 dib3000mb_reg_agc_bandwidth[] = { 43,44,45,46,47,48,49,50 }; + +static u16 dib3000mb_agc_bandwidth_low[] = + { 2088, 10, 2088, 10, 3448, 5, 3448, 5 }; +static u16 dib3000mb_agc_bandwidth_high[] = + { 2349, 5, 2349, 5, 2586, 2, 2586, 2 }; + +/* + * lock0 definition (coff_lock) + */ +#define DIB3000MB_REG_LOCK0_MASK ( 51) +#define DIB3000MB_LOCK0_DEFAULT ( 4) + +/* + * lock1 definition (cpil_lock) + * for auto search + * which values hide behind the lock masks + */ +#define DIB3000MB_REG_LOCK1_MASK ( 52) +#define DIB3000MB_LOCK1_SEARCH_4 (0x0004) +#define DIB3000MB_LOCK1_SEARCH_2048 (0x0800) +#define DIB3000MB_LOCK1_DEFAULT (0x0001) + +/* + * lock2 definition (fec_lock) */ +#define DIB3000MB_REG_LOCK2_MASK ( 53) +#define DIB3000MB_LOCK2_DEFAULT (0x0080) + +/* + * SEQ ? what was that again ... :) + * changes when, inversion, guard time and fft is + * either automatically detected or not + */ +#define DIB3000MB_REG_SEQ ( 54) + +/* bandwidth */ +static u16 dib3000mb_reg_bandwidth[] = { 55,56,57,58,59,60,61,62,63,64,65,66,67 }; +static u16 dib3000mb_bandwidth_6mhz[] = + { 0, 33, 53312, 112, 46635, 563, 36565, 0, 1000, 0, 1010, 1, 45264 }; + +static u16 dib3000mb_bandwidth_7mhz[] = + { 0, 28, 64421, 96, 39973, 483, 3255, 0, 1000, 0, 1010, 1, 45264 }; + +static u16 dib3000mb_bandwidth_8mhz[] = + { 0, 25, 23600, 84, 34976, 422, 43808, 0, 1000, 0, 1010, 1, 45264 }; + +#define DIB3000MB_REG_UNK_68 ( 68) +#define DIB3000MB_UNK_68 ( 0) + +#define DIB3000MB_REG_UNK_69 ( 69) +#define DIB3000MB_UNK_69 ( 0) + +#define DIB3000MB_REG_UNK_71 ( 71) +#define DIB3000MB_UNK_71 ( 0) + +#define DIB3000MB_REG_UNK_77 ( 77) +#define DIB3000MB_UNK_77 ( 6) + +#define DIB3000MB_REG_UNK_78 ( 78) +#define DIB3000MB_UNK_78 (0x0080) + +/* isi */ +#define DIB3000MB_REG_ISI ( 79) +#define DIB3000MB_ISI_ACTIVATE ( 0) +#define DIB3000MB_ISI_INHIBIT ( 1) + +/* sync impovement */ +#define DIB3000MB_REG_SYNC_IMPROVEMENT ( 84) +#define DIB3000MB_SYNC_IMPROVE_2K_1_8 ( 3) +#define DIB3000MB_SYNC_IMPROVE_DEFAULT ( 0) + +/* phase noise compensation inhibition */ +#define DIB3000MB_REG_PHASE_NOISE ( 87) +#define DIB3000MB_PHASE_NOISE_DEFAULT ( 0) + +#define DIB3000MB_REG_UNK_92 ( 92) +#define DIB3000MB_UNK_92 (0x0080) + +#define DIB3000MB_REG_UNK_96 ( 96) +#define DIB3000MB_UNK_96 (0x0010) + +#define DIB3000MB_REG_UNK_97 ( 97) +#define DIB3000MB_UNK_97 (0x0009) + +/* mobile mode ??? */ +#define DIB3000MB_REG_MOBILE_MODE ( 101) +#define DIB3000MB_MOBILE_MODE_ON ( 1) +#define DIB3000MB_MOBILE_MODE_OFF ( 0) + +#define DIB3000MB_REG_UNK_106 ( 106) +#define DIB3000MB_UNK_106 (0x0080) + +#define DIB3000MB_REG_UNK_107 ( 107) +#define DIB3000MB_UNK_107 (0x0080) + +#define DIB3000MB_REG_UNK_108 ( 108) +#define DIB3000MB_UNK_108 (0x0080) + +/* fft */ +#define DIB3000MB_REG_UNK_121 ( 121) +#define DIB3000MB_UNK_121_2K ( 7) +#define DIB3000MB_UNK_121_DEFAULT ( 5) + +#define DIB3000MB_REG_UNK_122 ( 122) +#define DIB3000MB_UNK_122 ( 2867) + +/* QAM for mobile mode */ +#define DIB3000MB_REG_MOBILE_MODE_QAM ( 126) +#define DIB3000MB_MOBILE_MODE_QAM_64 ( 3) +#define DIB3000MB_MOBILE_MODE_QAM_QPSK_16 ( 1) +#define DIB3000MB_MOBILE_MODE_QAM_OFF ( 0) + +/* + * data diversity when having more than one chip on-board + * see also DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY + */ +#define DIB3000MB_REG_DATA_IN_DIVERSITY ( 127) +#define DIB3000MB_DATA_DIVERSITY_IN_OFF ( 0) +#define DIB3000MB_DATA_DIVERSITY_IN_ON ( 2) + +/* vit hrch */ +#define DIB3000MB_REG_VIT_HRCH ( 128) + +/* vit code rate */ +#define DIB3000MB_REG_VIT_CODE_RATE ( 129) + +/* vit select hp */ +#define DIB3000MB_REG_VIT_HP ( 130) + +/* time frame for Bit-Error-Rate calculation */ +#define DIB3000MB_REG_BERLEN ( 135) +#define DIB3000MB_BERLEN_LONG ( 0) +#define DIB3000MB_BERLEN_DEFAULT ( 1) +#define DIB3000MB_BERLEN_MEDIUM ( 2) +#define DIB3000MB_BERLEN_SHORT ( 3) + +/* 142 - 152 FIFO parameters + * which is what ? + */ + +#define DIB3000MB_REG_FIFO_142 ( 142) +#define DIB3000MB_FIFO_142 ( 0) + +/* MPEG2 TS output mode */ +#define DIB3000MB_REG_MPEG2_OUT_MODE ( 143) +#define DIB3000MB_MPEG2_OUT_MODE_204 ( 0) +#define DIB3000MB_MPEG2_OUT_MODE_188 ( 1) + +#define DIB3000MB_REG_PID_PARSE ( 144) +#define DIB3000MB_PID_PARSE_INHIBIT ( 0) +#define DIB3000MB_PID_PARSE_ACTIVATE ( 1) + +#define DIB3000MB_REG_FIFO ( 145) +#define DIB3000MB_FIFO_INHIBIT ( 1) +#define DIB3000MB_FIFO_ACTIVATE ( 0) + +#define DIB3000MB_REG_FIFO_146 ( 146) +#define DIB3000MB_FIFO_146 ( 3) + +#define DIB3000MB_REG_FIFO_147 ( 147) +#define DIB3000MB_FIFO_147 (0x0100) + +/* + * pidfilter + * it is not a hardware pidfilter but a filter which drops all pids + * except the ones set. Necessary because of the limited USB1.1 bandwidth. + * regs 153-168 + */ + +#define DIB3000MB_REG_FIRST_PID ( 153) +#define DIB3000MB_NUM_PIDS ( 16) + +/* + * output mode + * USB devices have to use 'slave'-mode + * see also DIB3000MB_REG_ELECT_OUT_MODE + */ +#define DIB3000MB_REG_OUTPUT_MODE ( 169) +#define DIB3000MB_OUTPUT_MODE_GATED_CLK ( 0) +#define DIB3000MB_OUTPUT_MODE_CONT_CLK ( 1) +#define DIB3000MB_OUTPUT_MODE_SERIAL ( 2) +#define DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY ( 5) +#define DIB3000MB_OUTPUT_MODE_SLAVE ( 6) + +/* irq event mask */ +#define DIB3000MB_REG_IRQ_EVENT_MASK ( 170) +#define DIB3000MB_IRQ_EVENT_MASK ( 0) + +/* filter coefficients */ +static u16 dib3000mb_reg_filter_coeffs[] = { + 171, 172, 173, 174, 175, 176, 177, 178, + 179, 180, 181, 182, 183, 184, 185, 186, + 188, 189, 190, 191, 192, 194 +}; + +static u16 dib3000mb_filter_coeffs[] = { + 226, 160, 29, + 979, 998, 19, + 22, 1019, 1006, + 1022, 12, 6, + 1017, 1017, 3, + 6, 1019, + 1021, 2, 3, + 1, 0, +}; + +/* + * mobile algorithm (when you are moving with your device) + * but not faster than 90 km/h + */ +#define DIB3000MB_REG_MOBILE_ALGO ( 195) +#define DIB3000MB_MOBILE_ALGO_ON ( 0) +#define DIB3000MB_MOBILE_ALGO_OFF ( 1) + +/* multiple demodulators algorithm */ +#define DIB3000MB_REG_MULTI_DEMOD_MSB ( 206) +#define DIB3000MB_REG_MULTI_DEMOD_LSB ( 207) + +/* terminator, no more demods */ +#define DIB3000MB_MULTI_DEMOD_MSB ( 32767) +#define DIB3000MB_MULTI_DEMOD_LSB ( 4095) + +/* bring the device into a known */ +#define DIB3000MB_REG_RESET_DEVICE ( 1024) +#define DIB3000MB_RESET_DEVICE (0x812c) +#define DIB3000MB_RESET_DEVICE_RST ( 0) + +/* hardware clock configuration */ +#define DIB3000MB_REG_CLOCK ( 1027) +#define DIB3000MB_CLOCK_DEFAULT (0x9000) +#define DIB3000MB_CLOCK_DIVERSITY (0x92b0) + +/* power down config */ +#define DIB3000MB_REG_POWER_CONTROL ( 1028) +#define DIB3000MB_POWER_DOWN ( 1) +#define DIB3000MB_POWER_UP ( 0) + +/* electrical output mode */ +#define DIB3000MB_REG_ELECT_OUT_MODE ( 1029) +#define DIB3000MB_ELECT_OUT_MODE_OFF ( 0) +#define DIB3000MB_ELECT_OUT_MODE_ON ( 1) + +/* set the tuner i2c address */ +#define DIB3000MB_REG_TUNER ( 1089) + +/* monitoring registers (read only) */ + +/* agc loop locked (size: 1) */ +#define DIB3000MB_REG_AGC_LOCK ( 324) + +/* agc power (size: 16) */ +#define DIB3000MB_REG_AGC_POWER ( 325) + +/* agc1 value (16) */ +#define DIB3000MB_REG_AGC1_VALUE ( 326) + +/* agc2 value (16) */ +#define DIB3000MB_REG_AGC2_VALUE ( 327) + +/* total RF power (16), can be used for signal strength */ +#define DIB3000MB_REG_RF_POWER ( 328) + +/* dds_frequency with offset (24) */ +#define DIB3000MB_REG_DDS_VALUE_MSB ( 339) +#define DIB3000MB_REG_DDS_VALUE_LSB ( 340) + +/* timing offset signed (24) */ +#define DIB3000MB_REG_TIMING_OFFSET_MSB ( 341) +#define DIB3000MB_REG_TIMING_OFFSET_LSB ( 342) + +/* fft start position (13) */ +#define DIB3000MB_REG_FFT_WINDOW_POS ( 353) + +/* carriers locked (1) */ +#define DIB3000MB_REG_CARRIER_LOCK ( 355) + +/* noise power (24) */ +#define DIB3000MB_REG_NOISE_POWER_MSB ( 372) +#define DIB3000MB_REG_NOISE_POWER_LSB ( 373) + +#define DIB3000MB_REG_MOBILE_NOISE_MSB ( 374) +#define DIB3000MB_REG_MOBILE_NOISE_LSB ( 375) + +/* + * signal power (16), this and the above can be + * used to calculate the signal/noise - ratio + */ +#define DIB3000MB_REG_SIGNAL_POWER ( 380) + +/* mer (24) */ +#define DIB3000MB_REG_MER_MSB ( 381) +#define DIB3000MB_REG_MER_LSB ( 382) + +/* + * Transmission Parameter Signalling (TPS) + * the following registers can be used to get TPS-information. + * The values are according to the DVB-T standard. + */ + +/* TPS locked (1) */ +#define DIB3000MB_REG_TPS_LOCK ( 394) + +/* QAM from TPS (2) (values according to DIB3000MB_REG_QAM) */ +#define DIB3000MB_REG_TPS_QAM ( 398) + +/* hierarchy from TPS (1) */ +#define DIB3000MB_REG_TPS_HRCH ( 399) + +/* alpha from TPS (3) (values according to DIB3000MB_REG_VIT_ALPHA) */ +#define DIB3000MB_REG_TPS_VIT_ALPHA ( 400) + +/* code rate high priority from TPS (3) (values according to DIB3000MB_FEC_*) */ +#define DIB3000MB_REG_TPS_CODE_RATE_HP ( 401) + +/* code rate low priority from TPS (3) if DIB3000MB_REG_TPS_VIT_ALPHA */ +#define DIB3000MB_REG_TPS_CODE_RATE_LP ( 402) + +/* guard time from TPS (2) (values according to DIB3000MB_REG_GUARD_TIME */ +#define DIB3000MB_REG_TPS_GUARD_TIME ( 403) + +/* fft size from TPS (2) (values according to DIB3000MB_REG_FFT) */ +#define DIB3000MB_REG_TPS_FFT ( 404) + +/* cell id from TPS (16) */ +#define DIB3000MB_REG_TPS_CELL_ID ( 406) + +/* TPS (68) */ +#define DIB3000MB_REG_TPS_1 ( 408) +#define DIB3000MB_REG_TPS_2 ( 409) +#define DIB3000MB_REG_TPS_3 ( 410) +#define DIB3000MB_REG_TPS_4 ( 411) +#define DIB3000MB_REG_TPS_5 ( 412) + +/* bit error rate (before RS correction) (21) */ +#define DIB3000MB_REG_BER_MSB ( 414) +#define DIB3000MB_REG_BER_LSB ( 415) + +/* packet error rate (uncorrected TS packets) (16) */ +#define DIB3000MB_REG_PACKET_ERROR_RATE ( 417) + +/* uncorrected packet count (16) */ +#define DIB3000MB_REG_UNC ( 420) + +/* viterbi locked (1) */ +#define DIB3000MB_REG_VIT_LCK ( 421) + +/* viterbi inidcator (16) */ +#define DIB3000MB_REG_VIT_INDICATOR ( 422) + +/* transport stream sync lock (1) */ +#define DIB3000MB_REG_TS_SYNC_LOCK ( 423) + +/* transport stream RS lock (1) */ +#define DIB3000MB_REG_TS_RS_LOCK ( 424) + +/* lock mask 0 value (1) */ +#define DIB3000MB_REG_LOCK0_VALUE ( 425) + +/* lock mask 1 value (1) */ +#define DIB3000MB_REG_LOCK1_VALUE ( 426) + +/* lock mask 2 value (1) */ +#define DIB3000MB_REG_LOCK2_VALUE ( 427) + +/* interrupt pending for auto search */ +#define DIB3000MB_REG_AS_IRQ_PENDING ( 434) + +#endif diff --git a/drivers/media/dvb-frontends/dib3000mc.c b/drivers/media/dvb-frontends/dib3000mc.c new file mode 100644 index 00000000..ffad181a --- /dev/null +++ b/drivers/media/dvb-frontends/dib3000mc.c @@ -0,0 +1,940 @@ +/* + * Driver for DiBcom DiB3000MC/P-demodulator. + * + * Copyright (C) 2004-7 DiBcom (http://www.dibcom.fr/) + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This code is partially based on the previous dib3000mc.c . + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include +#include +#include + +#include "dvb_frontend.h" + +#include "dib3000mc.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +static int buggy_sfn_workaround; +module_param(buggy_sfn_workaround, int, 0644); +MODULE_PARM_DESC(buggy_sfn_workaround, "Enable work-around for buggy SFNs (default: 0)"); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB3000MC/P:"); printk(args); printk("\n"); } } while (0) + +struct dib3000mc_state { + struct dvb_frontend demod; + struct dib3000mc_config *cfg; + + u8 i2c_addr; + struct i2c_adapter *i2c_adap; + + struct dibx000_i2c_master i2c_master; + + u32 timf; + + u32 current_bandwidth; + + u16 dev_id; + + u8 sfn_workaround_active :1; +}; + +static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg) +{ + u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff }; + u8 rb[2]; + struct i2c_msg msg[2] = { + { .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 }, + { .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 }, + }; + + if (i2c_transfer(state->i2c_adap, msg, 2) != 2) + dprintk("i2c read error on %d\n",reg); + + return (rb[0] << 8) | rb[1]; +} + +static int dib3000mc_write_word(struct dib3000mc_state *state, u16 reg, u16 val) +{ + u8 b[4] = { + (reg >> 8) & 0xff, reg & 0xff, + (val >> 8) & 0xff, val & 0xff, + }; + struct i2c_msg msg = { + .addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4 + }; + return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0; +} + +static int dib3000mc_identify(struct dib3000mc_state *state) +{ + u16 value; + if ((value = dib3000mc_read_word(state, 1025)) != 0x01b3) { + dprintk("-E- DiB3000MC/P: wrong Vendor ID (read=0x%x)\n",value); + return -EREMOTEIO; + } + + value = dib3000mc_read_word(state, 1026); + if (value != 0x3001 && value != 0x3002) { + dprintk("-E- DiB3000MC/P: wrong Device ID (%x)\n",value); + return -EREMOTEIO; + } + state->dev_id = value; + + dprintk("-I- found DiB3000MC/P: %x\n",state->dev_id); + + return 0; +} + +static int dib3000mc_set_timing(struct dib3000mc_state *state, s16 nfft, u32 bw, u8 update_offset) +{ + u32 timf; + + if (state->timf == 0) { + timf = 1384402; // default value for 8MHz + if (update_offset) + msleep(200); // first time we do an update + } else + timf = state->timf; + + timf *= (bw / 1000); + + if (update_offset) { + s16 tim_offs = dib3000mc_read_word(state, 416); + + if (tim_offs & 0x2000) + tim_offs -= 0x4000; + + if (nfft == TRANSMISSION_MODE_2K) + tim_offs *= 4; + + timf += tim_offs; + state->timf = timf / (bw / 1000); + } + + dprintk("timf: %d\n", timf); + + dib3000mc_write_word(state, 23, (u16) (timf >> 16)); + dib3000mc_write_word(state, 24, (u16) (timf ) & 0xffff); + + return 0; +} + +static int dib3000mc_setup_pwm_state(struct dib3000mc_state *state) +{ + u16 reg_51, reg_52 = state->cfg->agc->setup & 0xfefb; + if (state->cfg->pwm3_inversion) { + reg_51 = (2 << 14) | (0 << 10) | (7 << 6) | (2 << 2) | (2 << 0); + reg_52 |= (1 << 2); + } else { + reg_51 = (2 << 14) | (4 << 10) | (7 << 6) | (2 << 2) | (2 << 0); + reg_52 |= (1 << 8); + } + dib3000mc_write_word(state, 51, reg_51); + dib3000mc_write_word(state, 52, reg_52); + + if (state->cfg->use_pwm3) + dib3000mc_write_word(state, 245, (1 << 3) | (1 << 0)); + else + dib3000mc_write_word(state, 245, 0); + + dib3000mc_write_word(state, 1040, 0x3); + return 0; +} + +static int dib3000mc_set_output_mode(struct dib3000mc_state *state, int mode) +{ + int ret = 0; + u16 fifo_threshold = 1792; + u16 outreg = 0; + u16 outmode = 0; + u16 elecout = 1; + u16 smo_reg = dib3000mc_read_word(state, 206) & 0x0010; /* keep the pid_parse bit */ + + dprintk("-I- Setting output mode for demod %p to %d\n", + &state->demod, mode); + + switch (mode) { + case OUTMODE_HIGH_Z: // disable + elecout = 0; + break; + case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock + outmode = 0; + break; + case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock + outmode = 1; + break; + case OUTMODE_MPEG2_SERIAL: // STBs with serial input + outmode = 2; + break; + case OUTMODE_MPEG2_FIFO: // e.g. USB feeding + elecout = 3; + /*ADDR @ 206 : + P_smo_error_discard [1;6:6] = 0 + P_smo_rs_discard [1;5:5] = 0 + P_smo_pid_parse [1;4:4] = 0 + P_smo_fifo_flush [1;3:3] = 0 + P_smo_mode [2;2:1] = 11 + P_smo_ovf_prot [1;0:0] = 0 + */ + smo_reg |= 3 << 1; + fifo_threshold = 512; + outmode = 5; + break; + case OUTMODE_DIVERSITY: + outmode = 4; + elecout = 1; + break; + default: + dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod); + outmode = 0; + break; + } + + if ((state->cfg->output_mpeg2_in_188_bytes)) + smo_reg |= (1 << 5); // P_smo_rs_discard [1;5:5] = 1 + + outreg = dib3000mc_read_word(state, 244) & 0x07FF; + outreg |= (outmode << 11); + ret |= dib3000mc_write_word(state, 244, outreg); + ret |= dib3000mc_write_word(state, 206, smo_reg); /*smo_ mode*/ + ret |= dib3000mc_write_word(state, 207, fifo_threshold); /* synchronous fread */ + ret |= dib3000mc_write_word(state, 1040, elecout); /* P_out_cfg */ + return ret; +} + +static int dib3000mc_set_bandwidth(struct dib3000mc_state *state, u32 bw) +{ + u16 bw_cfg[6] = { 0 }; + u16 imp_bw_cfg[3] = { 0 }; + u16 reg; + +/* settings here are for 27.7MHz */ + switch (bw) { + case 8000: + bw_cfg[0] = 0x0019; bw_cfg[1] = 0x5c30; bw_cfg[2] = 0x0054; bw_cfg[3] = 0x88a0; bw_cfg[4] = 0x01a6; bw_cfg[5] = 0xab20; + imp_bw_cfg[0] = 0x04db; imp_bw_cfg[1] = 0x00db; imp_bw_cfg[2] = 0x00b7; + break; + + case 7000: + bw_cfg[0] = 0x001c; bw_cfg[1] = 0xfba5; bw_cfg[2] = 0x0060; bw_cfg[3] = 0x9c25; bw_cfg[4] = 0x01e3; bw_cfg[5] = 0x0cb7; + imp_bw_cfg[0] = 0x04c0; imp_bw_cfg[1] = 0x00c0; imp_bw_cfg[2] = 0x00a0; + break; + + case 6000: + bw_cfg[0] = 0x0021; bw_cfg[1] = 0xd040; bw_cfg[2] = 0x0070; bw_cfg[3] = 0xb62b; bw_cfg[4] = 0x0233; bw_cfg[5] = 0x8ed5; + imp_bw_cfg[0] = 0x04a5; imp_bw_cfg[1] = 0x00a5; imp_bw_cfg[2] = 0x0089; + break; + + case 5000: + bw_cfg[0] = 0x0028; bw_cfg[1] = 0x9380; bw_cfg[2] = 0x0087; bw_cfg[3] = 0x4100; bw_cfg[4] = 0x02a4; bw_cfg[5] = 0x4500; + imp_bw_cfg[0] = 0x0489; imp_bw_cfg[1] = 0x0089; imp_bw_cfg[2] = 0x0072; + break; + + default: return -EINVAL; + } + + for (reg = 6; reg < 12; reg++) + dib3000mc_write_word(state, reg, bw_cfg[reg - 6]); + dib3000mc_write_word(state, 12, 0x0000); + dib3000mc_write_word(state, 13, 0x03e8); + dib3000mc_write_word(state, 14, 0x0000); + dib3000mc_write_word(state, 15, 0x03f2); + dib3000mc_write_word(state, 16, 0x0001); + dib3000mc_write_word(state, 17, 0xb0d0); + // P_sec_len + dib3000mc_write_word(state, 18, 0x0393); + dib3000mc_write_word(state, 19, 0x8700); + + for (reg = 55; reg < 58; reg++) + dib3000mc_write_word(state, reg, imp_bw_cfg[reg - 55]); + + // Timing configuration + dib3000mc_set_timing(state, TRANSMISSION_MODE_2K, bw, 0); + + return 0; +} + +static u16 impulse_noise_val[29] = + +{ + 0x38, 0x6d9, 0x3f28, 0x7a7, 0x3a74, 0x196, 0x32a, 0x48c, 0x3ffe, 0x7f3, + 0x2d94, 0x76, 0x53d, 0x3ff8, 0x7e3, 0x3320, 0x76, 0x5b3, 0x3feb, 0x7d2, + 0x365e, 0x76, 0x48c, 0x3ffe, 0x5b3, 0x3feb, 0x76, 0x0000, 0xd +}; + +static void dib3000mc_set_impulse_noise(struct dib3000mc_state *state, u8 mode, s16 nfft) +{ + u16 i; + for (i = 58; i < 87; i++) + dib3000mc_write_word(state, i, impulse_noise_val[i-58]); + + if (nfft == TRANSMISSION_MODE_8K) { + dib3000mc_write_word(state, 58, 0x3b); + dib3000mc_write_word(state, 84, 0x00); + dib3000mc_write_word(state, 85, 0x8200); + } + + dib3000mc_write_word(state, 34, 0x1294); + dib3000mc_write_word(state, 35, 0x1ff8); + if (mode == 1) + dib3000mc_write_word(state, 55, dib3000mc_read_word(state, 55) | (1 << 10)); +} + +static int dib3000mc_init(struct dvb_frontend *demod) +{ + struct dib3000mc_state *state = demod->demodulator_priv; + struct dibx000_agc_config *agc = state->cfg->agc; + + // Restart Configuration + dib3000mc_write_word(state, 1027, 0x8000); + dib3000mc_write_word(state, 1027, 0x0000); + + // power up the demod + mobility configuration + dib3000mc_write_word(state, 140, 0x0000); + dib3000mc_write_word(state, 1031, 0); + + if (state->cfg->mobile_mode) { + dib3000mc_write_word(state, 139, 0x0000); + dib3000mc_write_word(state, 141, 0x0000); + dib3000mc_write_word(state, 175, 0x0002); + dib3000mc_write_word(state, 1032, 0x0000); + } else { + dib3000mc_write_word(state, 139, 0x0001); + dib3000mc_write_word(state, 141, 0x0000); + dib3000mc_write_word(state, 175, 0x0000); + dib3000mc_write_word(state, 1032, 0x012C); + } + dib3000mc_write_word(state, 1033, 0x0000); + + // P_clk_cfg + dib3000mc_write_word(state, 1037, 0x3130); + + // other configurations + + // P_ctrl_sfreq + dib3000mc_write_word(state, 33, (5 << 0)); + dib3000mc_write_word(state, 88, (1 << 10) | (0x10 << 0)); + + // Phase noise control + // P_fft_phacor_inh, P_fft_phacor_cpe, P_fft_powrange + dib3000mc_write_word(state, 99, (1 << 9) | (0x20 << 0)); + + if (state->cfg->phase_noise_mode == 0) + dib3000mc_write_word(state, 111, 0x00); + else + dib3000mc_write_word(state, 111, 0x02); + + // P_agc_global + dib3000mc_write_word(state, 50, 0x8000); + + // agc setup misc + dib3000mc_setup_pwm_state(state); + + // P_agc_counter_lock + dib3000mc_write_word(state, 53, 0x87); + // P_agc_counter_unlock + dib3000mc_write_word(state, 54, 0x87); + + /* agc */ + dib3000mc_write_word(state, 36, state->cfg->max_time); + dib3000mc_write_word(state, 37, (state->cfg->agc_command1 << 13) | (state->cfg->agc_command2 << 12) | (0x1d << 0)); + dib3000mc_write_word(state, 38, state->cfg->pwm3_value); + dib3000mc_write_word(state, 39, state->cfg->ln_adc_level); + + // set_agc_loop_Bw + dib3000mc_write_word(state, 40, 0x0179); + dib3000mc_write_word(state, 41, 0x03f0); + + dib3000mc_write_word(state, 42, agc->agc1_max); + dib3000mc_write_word(state, 43, agc->agc1_min); + dib3000mc_write_word(state, 44, agc->agc2_max); + dib3000mc_write_word(state, 45, agc->agc2_min); + dib3000mc_write_word(state, 46, (agc->agc1_pt1 << 8) | agc->agc1_pt2); + dib3000mc_write_word(state, 47, (agc->agc1_slope1 << 8) | agc->agc1_slope2); + dib3000mc_write_word(state, 48, (agc->agc2_pt1 << 8) | agc->agc2_pt2); + dib3000mc_write_word(state, 49, (agc->agc2_slope1 << 8) | agc->agc2_slope2); + +// Begin: TimeOut registers + // P_pha3_thres + dib3000mc_write_word(state, 110, 3277); + // P_timf_alpha = 6, P_corm_alpha = 6, P_corm_thres = 0x80 + dib3000mc_write_word(state, 26, 0x6680); + // lock_mask0 + dib3000mc_write_word(state, 1, 4); + // lock_mask1 + dib3000mc_write_word(state, 2, 4); + // lock_mask2 + dib3000mc_write_word(state, 3, 0x1000); + // P_search_maxtrial=1 + dib3000mc_write_word(state, 5, 1); + + dib3000mc_set_bandwidth(state, 8000); + + // div_lock_mask + dib3000mc_write_word(state, 4, 0x814); + + dib3000mc_write_word(state, 21, (1 << 9) | 0x164); + dib3000mc_write_word(state, 22, 0x463d); + + // Spurious rm cfg + // P_cspu_regul, P_cspu_win_cut + dib3000mc_write_word(state, 120, 0x200f); + // P_adp_selec_monit + dib3000mc_write_word(state, 134, 0); + + // Fec cfg + dib3000mc_write_word(state, 195, 0x10); + + // diversity register: P_dvsy_sync_wait.. + dib3000mc_write_word(state, 180, 0x2FF0); + + // Impulse noise configuration + dib3000mc_set_impulse_noise(state, 0, TRANSMISSION_MODE_8K); + + // output mode set-up + dib3000mc_set_output_mode(state, OUTMODE_HIGH_Z); + + /* close the i2c-gate */ + dib3000mc_write_word(state, 769, (1 << 7) ); + + return 0; +} + +static int dib3000mc_sleep(struct dvb_frontend *demod) +{ + struct dib3000mc_state *state = demod->demodulator_priv; + + dib3000mc_write_word(state, 1031, 0xFFFF); + dib3000mc_write_word(state, 1032, 0xFFFF); + dib3000mc_write_word(state, 1033, 0xFFF0); + + return 0; +} + +static void dib3000mc_set_adp_cfg(struct dib3000mc_state *state, s16 qam) +{ + u16 cfg[4] = { 0 },reg; + switch (qam) { + case QPSK: + cfg[0] = 0x099a; cfg[1] = 0x7fae; cfg[2] = 0x0333; cfg[3] = 0x7ff0; + break; + case QAM_16: + cfg[0] = 0x023d; cfg[1] = 0x7fdf; cfg[2] = 0x00a4; cfg[3] = 0x7ff0; + break; + case QAM_64: + cfg[0] = 0x0148; cfg[1] = 0x7ff0; cfg[2] = 0x00a4; cfg[3] = 0x7ff8; + break; + } + for (reg = 129; reg < 133; reg++) + dib3000mc_write_word(state, reg, cfg[reg - 129]); +} + +static void dib3000mc_set_channel_cfg(struct dib3000mc_state *state, + struct dtv_frontend_properties *ch, u16 seq) +{ + u16 value; + u32 bw = BANDWIDTH_TO_KHZ(ch->bandwidth_hz); + + dib3000mc_set_bandwidth(state, bw); + dib3000mc_set_timing(state, ch->transmission_mode, bw, 0); + +// if (boost) +// dib3000mc_write_word(state, 100, (11 << 6) + 6); +// else + dib3000mc_write_word(state, 100, (16 << 6) + 9); + + dib3000mc_write_word(state, 1027, 0x0800); + dib3000mc_write_word(state, 1027, 0x0000); + + //Default cfg isi offset adp + dib3000mc_write_word(state, 26, 0x6680); + dib3000mc_write_word(state, 29, 0x1273); + dib3000mc_write_word(state, 33, 5); + dib3000mc_set_adp_cfg(state, QAM_16); + dib3000mc_write_word(state, 133, 15564); + + dib3000mc_write_word(state, 12 , 0x0); + dib3000mc_write_word(state, 13 , 0x3e8); + dib3000mc_write_word(state, 14 , 0x0); + dib3000mc_write_word(state, 15 , 0x3f2); + + dib3000mc_write_word(state, 93,0); + dib3000mc_write_word(state, 94,0); + dib3000mc_write_word(state, 95,0); + dib3000mc_write_word(state, 96,0); + dib3000mc_write_word(state, 97,0); + dib3000mc_write_word(state, 98,0); + + dib3000mc_set_impulse_noise(state, 0, ch->transmission_mode); + + value = 0; + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: value |= (0 << 7); break; + default: + case TRANSMISSION_MODE_8K: value |= (1 << 7); break; + } + switch (ch->guard_interval) { + case GUARD_INTERVAL_1_32: value |= (0 << 5); break; + case GUARD_INTERVAL_1_16: value |= (1 << 5); break; + case GUARD_INTERVAL_1_4: value |= (3 << 5); break; + default: + case GUARD_INTERVAL_1_8: value |= (2 << 5); break; + } + switch (ch->modulation) { + case QPSK: value |= (0 << 3); break; + case QAM_16: value |= (1 << 3); break; + default: + case QAM_64: value |= (2 << 3); break; + } + switch (HIERARCHY_1) { + case HIERARCHY_2: value |= 2; break; + case HIERARCHY_4: value |= 4; break; + default: + case HIERARCHY_1: value |= 1; break; + } + dib3000mc_write_word(state, 0, value); + dib3000mc_write_word(state, 5, (1 << 8) | ((seq & 0xf) << 4)); + + value = 0; + if (ch->hierarchy == 1) + value |= (1 << 4); + if (1 == 1) + value |= 1; + switch ((ch->hierarchy == 0 || 1 == 1) ? ch->code_rate_HP : ch->code_rate_LP) { + case FEC_2_3: value |= (2 << 1); break; + case FEC_3_4: value |= (3 << 1); break; + case FEC_5_6: value |= (5 << 1); break; + case FEC_7_8: value |= (7 << 1); break; + default: + case FEC_1_2: value |= (1 << 1); break; + } + dib3000mc_write_word(state, 181, value); + + // diversity synchro delay add 50% SFN margin + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_8K: value = 256; break; + case TRANSMISSION_MODE_2K: + default: value = 64; break; + } + switch (ch->guard_interval) { + case GUARD_INTERVAL_1_16: value *= 2; break; + case GUARD_INTERVAL_1_8: value *= 4; break; + case GUARD_INTERVAL_1_4: value *= 8; break; + default: + case GUARD_INTERVAL_1_32: value *= 1; break; + } + value <<= 4; + value |= dib3000mc_read_word(state, 180) & 0x000f; + dib3000mc_write_word(state, 180, value); + + // restart demod + value = dib3000mc_read_word(state, 0); + dib3000mc_write_word(state, 0, value | (1 << 9)); + dib3000mc_write_word(state, 0, value); + + msleep(30); + + dib3000mc_set_impulse_noise(state, state->cfg->impulse_noise_mode, ch->transmission_mode); +} + +static int dib3000mc_autosearch_start(struct dvb_frontend *demod) +{ + struct dtv_frontend_properties *chan = &demod->dtv_property_cache; + struct dib3000mc_state *state = demod->demodulator_priv; + u16 reg; +// u32 val; + struct dtv_frontend_properties schan; + + schan = *chan; + + /* TODO what is that ? */ + + /* a channel for autosearch */ + schan.transmission_mode = TRANSMISSION_MODE_8K; + schan.guard_interval = GUARD_INTERVAL_1_32; + schan.modulation = QAM_64; + schan.code_rate_HP = FEC_2_3; + schan.code_rate_LP = FEC_2_3; + schan.hierarchy = 0; + + dib3000mc_set_channel_cfg(state, &schan, 11); + + reg = dib3000mc_read_word(state, 0); + dib3000mc_write_word(state, 0, reg | (1 << 8)); + dib3000mc_read_word(state, 511); + dib3000mc_write_word(state, 0, reg); + + return 0; +} + +static int dib3000mc_autosearch_is_irq(struct dvb_frontend *demod) +{ + struct dib3000mc_state *state = demod->demodulator_priv; + u16 irq_pending = dib3000mc_read_word(state, 511); + + if (irq_pending & 0x1) // failed + return 1; + + if (irq_pending & 0x2) // succeeded + return 2; + + return 0; // still pending +} + +static int dib3000mc_tune(struct dvb_frontend *demod) +{ + struct dtv_frontend_properties *ch = &demod->dtv_property_cache; + struct dib3000mc_state *state = demod->demodulator_priv; + + // ** configure demod ** + dib3000mc_set_channel_cfg(state, ch, 0); + + // activates isi + if (state->sfn_workaround_active) { + dprintk("SFN workaround is active\n"); + dib3000mc_write_word(state, 29, 0x1273); + dib3000mc_write_word(state, 108, 0x4000); // P_pha3_force_pha_shift + } else { + dib3000mc_write_word(state, 29, 0x1073); + dib3000mc_write_word(state, 108, 0x0000); // P_pha3_force_pha_shift + } + + dib3000mc_set_adp_cfg(state, (u8)ch->modulation); + if (ch->transmission_mode == TRANSMISSION_MODE_8K) { + dib3000mc_write_word(state, 26, 38528); + dib3000mc_write_word(state, 33, 8); + } else { + dib3000mc_write_word(state, 26, 30336); + dib3000mc_write_word(state, 33, 6); + } + + if (dib3000mc_read_word(state, 509) & 0x80) + dib3000mc_set_timing(state, ch->transmission_mode, + BANDWIDTH_TO_KHZ(ch->bandwidth_hz), 1); + + return 0; +} + +struct i2c_adapter * dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod, int gating) +{ + struct dib3000mc_state *st = demod->demodulator_priv; + return dibx000_get_i2c_adapter(&st->i2c_master, DIBX000_I2C_INTERFACE_TUNER, gating); +} + +EXPORT_SYMBOL(dib3000mc_get_tuner_i2c_master); + +static int dib3000mc_get_frontend(struct dvb_frontend* fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct dib3000mc_state *state = fe->demodulator_priv; + u16 tps = dib3000mc_read_word(state,458); + + fep->inversion = INVERSION_AUTO; + + fep->bandwidth_hz = state->current_bandwidth; + + switch ((tps >> 8) & 0x1) { + case 0: fep->transmission_mode = TRANSMISSION_MODE_2K; break; + case 1: fep->transmission_mode = TRANSMISSION_MODE_8K; break; + } + + switch (tps & 0x3) { + case 0: fep->guard_interval = GUARD_INTERVAL_1_32; break; + case 1: fep->guard_interval = GUARD_INTERVAL_1_16; break; + case 2: fep->guard_interval = GUARD_INTERVAL_1_8; break; + case 3: fep->guard_interval = GUARD_INTERVAL_1_4; break; + } + + switch ((tps >> 13) & 0x3) { + case 0: fep->modulation = QPSK; break; + case 1: fep->modulation = QAM_16; break; + case 2: + default: fep->modulation = QAM_64; break; + } + + /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */ + /* (tps >> 12) & 0x1 == hrch is used, (tps >> 9) & 0x7 == alpha */ + + fep->hierarchy = HIERARCHY_NONE; + switch ((tps >> 5) & 0x7) { + case 1: fep->code_rate_HP = FEC_1_2; break; + case 2: fep->code_rate_HP = FEC_2_3; break; + case 3: fep->code_rate_HP = FEC_3_4; break; + case 5: fep->code_rate_HP = FEC_5_6; break; + case 7: + default: fep->code_rate_HP = FEC_7_8; break; + + } + + switch ((tps >> 2) & 0x7) { + case 1: fep->code_rate_LP = FEC_1_2; break; + case 2: fep->code_rate_LP = FEC_2_3; break; + case 3: fep->code_rate_LP = FEC_3_4; break; + case 5: fep->code_rate_LP = FEC_5_6; break; + case 7: + default: fep->code_rate_LP = FEC_7_8; break; + } + + return 0; +} + +static int dib3000mc_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct dib3000mc_state *state = fe->demodulator_priv; + int ret; + + dib3000mc_set_output_mode(state, OUTMODE_HIGH_Z); + + state->current_bandwidth = fep->bandwidth_hz; + dib3000mc_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->bandwidth_hz)); + + /* maybe the parameter has been changed */ + state->sfn_workaround_active = buggy_sfn_workaround; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + msleep(100); + } + + if (fep->transmission_mode == TRANSMISSION_MODE_AUTO || + fep->guard_interval == GUARD_INTERVAL_AUTO || + fep->modulation == QAM_AUTO || + fep->code_rate_HP == FEC_AUTO) { + int i = 1000, found; + + dib3000mc_autosearch_start(fe); + do { + msleep(1); + found = dib3000mc_autosearch_is_irq(fe); + } while (found == 0 && i--); + + dprintk("autosearch returns: %d\n",found); + if (found == 0 || found == 1) + return 0; // no channel found + + dib3000mc_get_frontend(fe); + } + + ret = dib3000mc_tune(fe); + + /* make this a config parameter */ + dib3000mc_set_output_mode(state, OUTMODE_MPEG2_FIFO); + return ret; +} + +static int dib3000mc_read_status(struct dvb_frontend *fe, fe_status_t *stat) +{ + struct dib3000mc_state *state = fe->demodulator_priv; + u16 lock = dib3000mc_read_word(state, 509); + + *stat = 0; + + if (lock & 0x8000) + *stat |= FE_HAS_SIGNAL; + if (lock & 0x3000) + *stat |= FE_HAS_CARRIER; + if (lock & 0x0100) + *stat |= FE_HAS_VITERBI; + if (lock & 0x0010) + *stat |= FE_HAS_SYNC; + if (lock & 0x0008) + *stat |= FE_HAS_LOCK; + + return 0; +} + +static int dib3000mc_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct dib3000mc_state *state = fe->demodulator_priv; + *ber = (dib3000mc_read_word(state, 500) << 16) | dib3000mc_read_word(state, 501); + return 0; +} + +static int dib3000mc_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) +{ + struct dib3000mc_state *state = fe->demodulator_priv; + *unc = dib3000mc_read_word(state, 508); + return 0; +} + +static int dib3000mc_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct dib3000mc_state *state = fe->demodulator_priv; + u16 val = dib3000mc_read_word(state, 392); + *strength = 65535 - val; + return 0; +} + +static int dib3000mc_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + *snr = 0x0000; + return 0; +} + +static int dib3000mc_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void dib3000mc_release(struct dvb_frontend *fe) +{ + struct dib3000mc_state *state = fe->demodulator_priv; + dibx000_exit_i2c_master(&state->i2c_master); + kfree(state); +} + +int dib3000mc_pid_control(struct dvb_frontend *fe, int index, int pid,int onoff) +{ + struct dib3000mc_state *state = fe->demodulator_priv; + dib3000mc_write_word(state, 212 + index, onoff ? (1 << 13) | pid : 0); + return 0; +} +EXPORT_SYMBOL(dib3000mc_pid_control); + +int dib3000mc_pid_parse(struct dvb_frontend *fe, int onoff) +{ + struct dib3000mc_state *state = fe->demodulator_priv; + u16 tmp = dib3000mc_read_word(state, 206) & ~(1 << 4); + tmp |= (onoff << 4); + return dib3000mc_write_word(state, 206, tmp); +} +EXPORT_SYMBOL(dib3000mc_pid_parse); + +void dib3000mc_set_config(struct dvb_frontend *fe, struct dib3000mc_config *cfg) +{ + struct dib3000mc_state *state = fe->demodulator_priv; + state->cfg = cfg; +} +EXPORT_SYMBOL(dib3000mc_set_config); + +int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib3000mc_config cfg[]) +{ + struct dib3000mc_state *dmcst; + int k; + u8 new_addr; + + static u8 DIB3000MC_I2C_ADDRESS[] = {20,22,24,26}; + + dmcst = kzalloc(sizeof(struct dib3000mc_state), GFP_KERNEL); + if (dmcst == NULL) + return -ENOMEM; + + dmcst->i2c_adap = i2c; + + for (k = no_of_demods-1; k >= 0; k--) { + dmcst->cfg = &cfg[k]; + + /* designated i2c address */ + new_addr = DIB3000MC_I2C_ADDRESS[k]; + dmcst->i2c_addr = new_addr; + if (dib3000mc_identify(dmcst) != 0) { + dmcst->i2c_addr = default_addr; + if (dib3000mc_identify(dmcst) != 0) { + dprintk("-E- DiB3000P/MC #%d: not identified\n", k); + kfree(dmcst); + return -ENODEV; + } + } + + dib3000mc_set_output_mode(dmcst, OUTMODE_MPEG2_PAR_CONT_CLK); + + // set new i2c address and force divstr (Bit 1) to value 0 (Bit 0) + dib3000mc_write_word(dmcst, 1024, (new_addr << 3) | 0x1); + dmcst->i2c_addr = new_addr; + } + + for (k = 0; k < no_of_demods; k++) { + dmcst->cfg = &cfg[k]; + dmcst->i2c_addr = DIB3000MC_I2C_ADDRESS[k]; + + dib3000mc_write_word(dmcst, 1024, dmcst->i2c_addr << 3); + + /* turn off data output */ + dib3000mc_set_output_mode(dmcst, OUTMODE_HIGH_Z); + } + + kfree(dmcst); + return 0; +} +EXPORT_SYMBOL(dib3000mc_i2c_enumeration); + +static struct dvb_frontend_ops dib3000mc_ops; + +struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg) +{ + struct dvb_frontend *demod; + struct dib3000mc_state *st; + st = kzalloc(sizeof(struct dib3000mc_state), GFP_KERNEL); + if (st == NULL) + return NULL; + + st->cfg = cfg; + st->i2c_adap = i2c_adap; + st->i2c_addr = i2c_addr; + + demod = &st->demod; + demod->demodulator_priv = st; + memcpy(&st->demod.ops, &dib3000mc_ops, sizeof(struct dvb_frontend_ops)); + + if (dib3000mc_identify(st) != 0) + goto error; + + dibx000_init_i2c_master(&st->i2c_master, DIB3000MC, st->i2c_adap, st->i2c_addr); + + dib3000mc_write_word(st, 1037, 0x3130); + + return demod; + +error: + kfree(st); + return NULL; +} +EXPORT_SYMBOL(dib3000mc_attach); + +static struct dvb_frontend_ops dib3000mc_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "DiBcom 3000MC/P", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib3000mc_release, + + .init = dib3000mc_init, + .sleep = dib3000mc_sleep, + + .set_frontend = dib3000mc_set_frontend, + .get_tune_settings = dib3000mc_fe_get_tune_settings, + .get_frontend = dib3000mc_get_frontend, + + .read_status = dib3000mc_read_status, + .read_ber = dib3000mc_read_ber, + .read_signal_strength = dib3000mc_read_signal_strength, + .read_snr = dib3000mc_read_snr, + .read_ucblocks = dib3000mc_read_unc_blocks, +}; + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Driver for the DiBcom 3000MC/P COFDM demodulator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dib3000mc.h b/drivers/media/dvb-frontends/dib3000mc.h new file mode 100644 index 00000000..129d1425 --- /dev/null +++ b/drivers/media/dvb-frontends/dib3000mc.h @@ -0,0 +1,86 @@ +/* + * Driver for DiBcom DiB3000MC/P-demodulator. + * + * Copyright (C) 2004-6 DiBcom (http://www.dibcom.fr/) + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher\@desy.de) + * + * This code is partially based on the previous dib3000mc.c . + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#ifndef DIB3000MC_H +#define DIB3000MC_H + +#include + +#include "dibx000_common.h" + +struct dib3000mc_config { + struct dibx000_agc_config *agc; + + u8 phase_noise_mode; + u8 impulse_noise_mode; + + u8 pwm3_inversion; + u8 use_pwm3; + u16 pwm3_value; + + u16 max_time; + u16 ln_adc_level; + + u8 agc_command1 :1; + u8 agc_command2 :1; + + u8 mobile_mode; + + u8 output_mpeg2_in_188_bytes; +}; + +#define DEFAULT_DIB3000MC_I2C_ADDRESS 16 +#define DEFAULT_DIB3000P_I2C_ADDRESS 24 + +#if IS_ENABLED(CONFIG_DVB_DIB3000MC) +extern struct dvb_frontend *dib3000mc_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib3000mc_config *cfg); +extern int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c, + int no_of_demods, u8 default_addr, + struct dib3000mc_config cfg[]); +extern +struct i2c_adapter *dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod, + int gating); +#else +static inline +struct dvb_frontend *dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, + struct dib3000mc_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline +int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c, + int no_of_demods, u8 default_addr, + struct dib3000mc_config cfg[]) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline +struct i2c_adapter *dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod, + int gating) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_DIB3000MC + +extern int dib3000mc_pid_control(struct dvb_frontend *fe, int index, int pid,int onoff); +extern int dib3000mc_pid_parse(struct dvb_frontend *fe, int onoff); + +extern void dib3000mc_set_config(struct dvb_frontend *, struct dib3000mc_config *); + +#endif diff --git a/drivers/media/dvb-frontends/dib7000m.c b/drivers/media/dvb-frontends/dib7000m.c new file mode 100644 index 00000000..148bf792 --- /dev/null +++ b/drivers/media/dvb-frontends/dib7000m.c @@ -0,0 +1,1473 @@ +/* + * Linux-DVB Driver for DiBcom's DiB7000M and + * first generation DiB7000P-demodulator-family. + * + * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#include +#include +#include +#include + +#include "dvb_frontend.h" + +#include "dib7000m.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M: "); printk(args); printk("\n"); } } while (0) + +struct dib7000m_state { + struct dvb_frontend demod; + struct dib7000m_config cfg; + + u8 i2c_addr; + struct i2c_adapter *i2c_adap; + + struct dibx000_i2c_master i2c_master; + +/* offset is 1 in case of the 7000MC */ + u8 reg_offs; + + u16 wbd_ref; + + u8 current_band; + u32 current_bandwidth; + struct dibx000_agc_config *current_agc; + u32 timf; + u32 timf_default; + u32 internal_clk; + + u8 div_force_off : 1; + u8 div_state : 1; + u16 div_sync_wait; + + u16 revision; + + u8 agc_state; + + /* for the I2C transfer */ + struct i2c_msg msg[2]; + u8 i2c_write_buffer[4]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; +}; + +enum dib7000m_power_mode { + DIB7000M_POWER_ALL = 0, + + DIB7000M_POWER_NO, + DIB7000M_POWER_INTERF_ANALOG_AGC, + DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD, + DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD, + DIB7000M_POWER_INTERFACE_ONLY, +}; + +static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + state->i2c_write_buffer[0] = (reg >> 8) | 0x80; + state->i2c_write_buffer[1] = reg & 0xff; + + memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c_addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 2; + state->msg[1].addr = state->i2c_addr >> 1; + state->msg[1].flags = I2C_M_RD; + state->msg[1].buf = state->i2c_read_buffer; + state->msg[1].len = 2; + + if (i2c_transfer(state->i2c_adap, state->msg, 2) != 2) + dprintk("i2c read error on %d",reg); + + ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1]; + mutex_unlock(&state->i2c_buffer_lock); + + return ret; +} + +static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + + state->i2c_write_buffer[0] = (reg >> 8) & 0xff; + state->i2c_write_buffer[1] = reg & 0xff; + state->i2c_write_buffer[2] = (val >> 8) & 0xff; + state->i2c_write_buffer[3] = val & 0xff; + + memset(&state->msg[0], 0, sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c_addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 4; + + ret = (i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ? + -EREMOTEIO : 0); + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} +static void dib7000m_write_tab(struct dib7000m_state *state, u16 *buf) +{ + u16 l = 0, r, *n; + n = buf; + l = *n++; + while (l) { + r = *n++; + + if (state->reg_offs && (r >= 112 && r <= 331)) // compensate for 7000MC + r++; + + do { + dib7000m_write_word(state, r, *n++); + r++; + } while (--l); + l = *n++; + } +} + +static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode) +{ + int ret = 0; + u16 outreg, fifo_threshold, smo_mode, + sram = 0x0005; /* by default SRAM output is disabled */ + + outreg = 0; + fifo_threshold = 1792; + smo_mode = (dib7000m_read_word(state, 294 + state->reg_offs) & 0x0010) | (1 << 1); + + dprintk( "setting output mode for demod %p to %d", &state->demod, mode); + + switch (mode) { + case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock + outreg = (1 << 10); /* 0x0400 */ + break; + case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock + outreg = (1 << 10) | (1 << 6); /* 0x0440 */ + break; + case OUTMODE_MPEG2_SERIAL: // STBs with serial input + outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */ + break; + case OUTMODE_DIVERSITY: + if (state->cfg.hostbus_diversity) + outreg = (1 << 10) | (4 << 6); /* 0x0500 */ + else + sram |= 0x0c00; + break; + case OUTMODE_MPEG2_FIFO: // e.g. USB feeding + smo_mode |= (3 << 1); + fifo_threshold = 512; + outreg = (1 << 10) | (5 << 6); + break; + case OUTMODE_HIGH_Z: // disable + outreg = 0; + break; + default: + dprintk( "Unhandled output_mode passed to be set for demod %p",&state->demod); + break; + } + + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5) ; + + ret |= dib7000m_write_word(state, 294 + state->reg_offs, smo_mode); + ret |= dib7000m_write_word(state, 295 + state->reg_offs, fifo_threshold); /* synchronous fread */ + ret |= dib7000m_write_word(state, 1795, outreg); + ret |= dib7000m_write_word(state, 1805, sram); + + if (state->revision == 0x4003) { + u16 clk_cfg1 = dib7000m_read_word(state, 909) & 0xfffd; + if (mode == OUTMODE_DIVERSITY) + clk_cfg1 |= (1 << 1); // P_O_CLK_en + dib7000m_write_word(state, 909, clk_cfg1); + } + return ret; +} + +static void dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode) +{ + /* by default everything is going to be powered off */ + u16 reg_903 = 0xffff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906 = 0x3fff; + u8 offset = 0; + + /* now, depending on the requested mode, we power on */ + switch (mode) { + /* power up everything in the demod */ + case DIB7000M_POWER_ALL: + reg_903 = 0x0000; reg_904 = 0x0000; reg_905 = 0x0000; reg_906 = 0x0000; + break; + + /* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */ + case DIB7000M_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C or SRAM */ + reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)); + break; + + case DIB7000M_POWER_INTERF_ANALOG_AGC: + reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10)); + reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2)); + reg_906 &= ~((1 << 0)); + break; + + case DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD: + reg_903 = 0x0000; reg_904 = 0x801f; reg_905 = 0x0000; reg_906 = 0x0000; + break; + + case DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD: + reg_903 = 0x0000; reg_904 = 0x8000; reg_905 = 0x010b; reg_906 = 0x0000; + break; + case DIB7000M_POWER_NO: + break; + } + + /* always power down unused parts */ + if (!state->cfg.mobile_mode) + reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1); + + /* P_sdio_select_clk = 0 on MC and after*/ + if (state->revision != 0x4000) + reg_906 <<= 1; + + if (state->revision == 0x4003) + offset = 1; + + dib7000m_write_word(state, 903 + offset, reg_903); + dib7000m_write_word(state, 904 + offset, reg_904); + dib7000m_write_word(state, 905 + offset, reg_905); + dib7000m_write_word(state, 906 + offset, reg_906); +} + +static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc_states no) +{ + int ret = 0; + u16 reg_913 = dib7000m_read_word(state, 913), + reg_914 = dib7000m_read_word(state, 914); + + switch (no) { + case DIBX000_SLOW_ADC_ON: + reg_914 |= (1 << 1) | (1 << 0); + ret |= dib7000m_write_word(state, 914, reg_914); + reg_914 &= ~(1 << 1); + break; + + case DIBX000_SLOW_ADC_OFF: + reg_914 |= (1 << 1) | (1 << 0); + break; + + case DIBX000_ADC_ON: + if (state->revision == 0x4000) { // workaround for PA/MA + // power-up ADC + dib7000m_write_word(state, 913, 0); + dib7000m_write_word(state, 914, reg_914 & 0x3); + // power-down bandgag + dib7000m_write_word(state, 913, (1 << 15)); + dib7000m_write_word(state, 914, reg_914 & 0x3); + } + + reg_913 &= 0x0fff; + reg_914 &= 0x0003; + break; + + case DIBX000_ADC_OFF: // leave the VBG voltage on + reg_913 |= (1 << 14) | (1 << 13) | (1 << 12); + reg_914 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2); + break; + + case DIBX000_VBG_ENABLE: + reg_913 &= ~(1 << 15); + break; + + case DIBX000_VBG_DISABLE: + reg_913 |= (1 << 15); + break; + + default: + break; + } + +// dprintk( "913: %x, 914: %x", reg_913, reg_914); + ret |= dib7000m_write_word(state, 913, reg_913); + ret |= dib7000m_write_word(state, 914, reg_914); + + return ret; +} + +static int dib7000m_set_bandwidth(struct dib7000m_state *state, u32 bw) +{ + u32 timf; + + if (!bw) + bw = 8000; + + // store the current bandwidth for later use + state->current_bandwidth = bw; + + if (state->timf == 0) { + dprintk( "using default timf"); + timf = state->timf_default; + } else { + dprintk( "using updated timf"); + timf = state->timf; + } + + timf = timf * (bw / 50) / 160; + + dib7000m_write_word(state, 23, (u16) ((timf >> 16) & 0xffff)); + dib7000m_write_word(state, 24, (u16) ((timf ) & 0xffff)); + + return 0; +} + +static int dib7000m_set_diversity_in(struct dvb_frontend *demod, int onoff) +{ + struct dib7000m_state *state = demod->demodulator_priv; + + if (state->div_force_off) { + dprintk( "diversity combination deactivated - forced by COFDM parameters"); + onoff = 0; + } + state->div_state = (u8)onoff; + + if (onoff) { + dib7000m_write_word(state, 263 + state->reg_offs, 6); + dib7000m_write_word(state, 264 + state->reg_offs, 6); + dib7000m_write_word(state, 266 + state->reg_offs, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0)); + } else { + dib7000m_write_word(state, 263 + state->reg_offs, 1); + dib7000m_write_word(state, 264 + state->reg_offs, 0); + dib7000m_write_word(state, 266 + state->reg_offs, 0); + } + + return 0; +} + +static int dib7000m_sad_calib(struct dib7000m_state *state) +{ + +/* internal */ +// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth + dib7000m_write_word(state, 929, (0 << 1) | (0 << 0)); + dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096 + + /* do the calibration */ + dib7000m_write_word(state, 929, (1 << 0)); + dib7000m_write_word(state, 929, (0 << 0)); + + msleep(1); + + return 0; +} + +static void dib7000m_reset_pll_common(struct dib7000m_state *state, const struct dibx000_bandwidth_config *bw) +{ + dib7000m_write_word(state, 18, (u16) (((bw->internal*1000) >> 16) & 0xffff)); + dib7000m_write_word(state, 19, (u16) ( (bw->internal*1000) & 0xffff)); + dib7000m_write_word(state, 21, (u16) ( (bw->ifreq >> 16) & 0xffff)); + dib7000m_write_word(state, 22, (u16) ( bw->ifreq & 0xffff)); + + dib7000m_write_word(state, 928, bw->sad_cfg); +} + +static void dib7000m_reset_pll(struct dib7000m_state *state) +{ + const struct dibx000_bandwidth_config *bw = state->cfg.bw; + u16 reg_907,reg_910; + + /* default */ + reg_907 = (bw->pll_bypass << 15) | (bw->modulo << 7) | + (bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | + (bw->enable_refdiv << 1) | (0 << 0); + reg_910 = (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset; + + // for this oscillator frequency should be 30 MHz for the Master (default values in the board_parameters give that value) + // this is only working only for 30 MHz crystals + if (!state->cfg.quartz_direct) { + reg_910 |= (1 << 5); // forcing the predivider to 1 + + // if the previous front-end is baseband, its output frequency is 15 MHz (prev freq divided by 2) + if(state->cfg.input_clk_is_div_2) + reg_907 |= (16 << 9); + else // otherwise the previous front-end puts out its input (default 30MHz) - no extra division necessary + reg_907 |= (8 << 9); + } else { + reg_907 |= (bw->pll_ratio & 0x3f) << 9; + reg_910 |= (bw->pll_prediv << 5); + } + + dib7000m_write_word(state, 910, reg_910); // pll cfg + dib7000m_write_word(state, 907, reg_907); // clk cfg0 + dib7000m_write_word(state, 908, 0x0006); // clk_cfg1 + + dib7000m_reset_pll_common(state, bw); +} + +static void dib7000mc_reset_pll(struct dib7000m_state *state) +{ + const struct dibx000_bandwidth_config *bw = state->cfg.bw; + u16 clk_cfg1; + + // clk_cfg0 + dib7000m_write_word(state, 907, (bw->pll_prediv << 8) | (bw->pll_ratio << 0)); + + // clk_cfg1 + //dib7000m_write_word(state, 908, (1 << 14) | (3 << 12) |(0 << 11) | + clk_cfg1 = (0 << 14) | (3 << 12) |(0 << 11) | + (bw->IO_CLK_en_core << 10) | (bw->bypclk_div << 5) | (bw->enable_refdiv << 4) | + (1 << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0); + dib7000m_write_word(state, 908, clk_cfg1); + clk_cfg1 = (clk_cfg1 & 0xfff7) | (bw->pll_bypass << 3); + dib7000m_write_word(state, 908, clk_cfg1); + + // smpl_cfg + dib7000m_write_word(state, 910, (1 << 12) | (2 << 10) | (bw->modulo << 8) | (bw->ADClkSrc << 7)); + + dib7000m_reset_pll_common(state, bw); +} + +static int dib7000m_reset_gpio(struct dib7000m_state *st) +{ + /* reset the GPIOs */ + dib7000m_write_word(st, 773, st->cfg.gpio_dir); + dib7000m_write_word(st, 774, st->cfg.gpio_val); + + /* TODO 782 is P_gpio_od */ + + dib7000m_write_word(st, 775, st->cfg.gpio_pwm_pos); + + dib7000m_write_word(st, 780, st->cfg.pwm_freq_div); + return 0; +} + +static u16 dib7000m_defaults_common[] = + +{ + // auto search configuration + 3, 2, + 0x0004, + 0x1000, + 0x0814, + + 12, 6, + 0x001b, + 0x7740, + 0x005b, + 0x8d80, + 0x01c9, + 0xc380, + 0x0000, + 0x0080, + 0x0000, + 0x0090, + 0x0001, + 0xd4c0, + + 1, 26, + 0x6680, // P_corm_thres Lock algorithms configuration + + 1, 170, + 0x0410, // P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on + + 8, 173, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + + 1, 182, + 8192, // P_fft_nb_to_cut + + 2, 195, + 0x0ccd, // P_pha3_thres + 0, // P_cti_use_cpe, P_cti_use_prog + + 1, 205, + 0x200f, // P_cspu_regul, P_cspu_win_cut + + 5, 214, + 0x023d, // P_adp_regul_cnt + 0x00a4, // P_adp_noise_cnt + 0x00a4, // P_adp_regul_ext + 0x7ff0, // P_adp_noise_ext + 0x3ccc, // P_adp_fil + + 1, 226, + 0, // P_2d_byp_ti_num + + 1, 255, + 0x800, // P_equal_thres_wgn + + 1, 263, + 0x0001, + + 1, 281, + 0x0010, // P_fec_* + + 1, 294, + 0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard + + 0 +}; + +static u16 dib7000m_defaults[] = + +{ + /* set ADC level to -16 */ + 11, 76, + (1 << 13) - 825 - 117, + (1 << 13) - 837 - 117, + (1 << 13) - 811 - 117, + (1 << 13) - 766 - 117, + (1 << 13) - 737 - 117, + (1 << 13) - 693 - 117, + (1 << 13) - 648 - 117, + (1 << 13) - 619 - 117, + (1 << 13) - 575 - 117, + (1 << 13) - 531 - 117, + (1 << 13) - 501 - 117, + + // Tuner IO bank: max drive (14mA) + 1, 912, + 0x2c8a, + + 1, 1817, + 1, + + 0, +}; + +static int dib7000m_demod_reset(struct dib7000m_state *state) +{ + dib7000m_set_power_mode(state, DIB7000M_POWER_ALL); + + /* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */ + dib7000m_set_adc_state(state, DIBX000_VBG_ENABLE); + + /* restart all parts */ + dib7000m_write_word(state, 898, 0xffff); + dib7000m_write_word(state, 899, 0xffff); + dib7000m_write_word(state, 900, 0xff0f); + dib7000m_write_word(state, 901, 0xfffc); + + dib7000m_write_word(state, 898, 0); + dib7000m_write_word(state, 899, 0); + dib7000m_write_word(state, 900, 0); + dib7000m_write_word(state, 901, 0); + + if (state->revision == 0x4000) + dib7000m_reset_pll(state); + else + dib7000mc_reset_pll(state); + + if (dib7000m_reset_gpio(state) != 0) + dprintk( "GPIO reset was not successful."); + + if (dib7000m_set_output_mode(state, OUTMODE_HIGH_Z) != 0) + dprintk( "OUTPUT_MODE could not be reset."); + + /* unforce divstr regardless whether i2c enumeration was done or not */ + dib7000m_write_word(state, 1794, dib7000m_read_word(state, 1794) & ~(1 << 1) ); + + dib7000m_set_bandwidth(state, 8000); + + dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON); + dib7000m_sad_calib(state); + dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_OFF); + + if (state->cfg.dvbt_mode) + dib7000m_write_word(state, 1796, 0x0); // select DVB-T output + + if (state->cfg.mobile_mode) + dib7000m_write_word(state, 261 + state->reg_offs, 2); + else + dib7000m_write_word(state, 224 + state->reg_offs, 1); + + // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ... + if(state->cfg.tuner_is_baseband) + dib7000m_write_word(state, 36, 0x0755); + else + dib7000m_write_word(state, 36, 0x1f55); + + // P_divclksel=3 P_divbitsel=1 + if (state->revision == 0x4000) + dib7000m_write_word(state, 909, (3 << 10) | (1 << 6)); + else + dib7000m_write_word(state, 909, (3 << 4) | 1); + + dib7000m_write_tab(state, dib7000m_defaults_common); + dib7000m_write_tab(state, dib7000m_defaults); + + dib7000m_set_power_mode(state, DIB7000M_POWER_INTERFACE_ONLY); + + state->internal_clk = state->cfg.bw->internal; + + return 0; +} + +static void dib7000m_restart_agc(struct dib7000m_state *state) +{ + // P_restart_iqc & P_restart_agc + dib7000m_write_word(state, 898, 0x0c00); + dib7000m_write_word(state, 898, 0x0000); +} + +static int dib7000m_agc_soft_split(struct dib7000m_state *state) +{ + u16 agc,split_offset; + + if(!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0) + return 0; + + // n_agc_global + agc = dib7000m_read_word(state, 390); + + if (agc > state->current_agc->split.min_thres) + split_offset = state->current_agc->split.min; + else if (agc < state->current_agc->split.max_thres) + split_offset = state->current_agc->split.max; + else + split_offset = state->current_agc->split.max * + (agc - state->current_agc->split.min_thres) / + (state->current_agc->split.max_thres - state->current_agc->split.min_thres); + + dprintk( "AGC split_offset: %d",split_offset); + + // P_agc_force_split and P_agc_split_offset + return dib7000m_write_word(state, 103, (dib7000m_read_word(state, 103) & 0xff00) | split_offset); +} + +static int dib7000m_update_lna(struct dib7000m_state *state) +{ + u16 dyn_gain; + + if (state->cfg.update_lna) { + // read dyn_gain here (because it is demod-dependent and not fe) + dyn_gain = dib7000m_read_word(state, 390); + + if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed + dib7000m_restart_agc(state); + return 1; + } + } + return 0; +} + +static int dib7000m_set_agc_config(struct dib7000m_state *state, u8 band) +{ + struct dibx000_agc_config *agc = NULL; + int i; + if (state->current_band == band && state->current_agc != NULL) + return 0; + state->current_band = band; + + for (i = 0; i < state->cfg.agc_config_count; i++) + if (state->cfg.agc[i].band_caps & band) { + agc = &state->cfg.agc[i]; + break; + } + + if (agc == NULL) { + dprintk( "no valid AGC configuration found for band 0x%02x",band); + return -EINVAL; + } + + state->current_agc = agc; + + /* AGC */ + dib7000m_write_word(state, 72 , agc->setup); + dib7000m_write_word(state, 73 , agc->inv_gain); + dib7000m_write_word(state, 74 , agc->time_stabiliz); + dib7000m_write_word(state, 97 , (agc->alpha_level << 12) | agc->thlock); + + // Demod AGC loop configuration + dib7000m_write_word(state, 98, (agc->alpha_mant << 5) | agc->alpha_exp); + dib7000m_write_word(state, 99, (agc->beta_mant << 6) | agc->beta_exp); + + dprintk( "WBD: ref: %d, sel: %d, active: %d, alpha: %d", + state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); + + /* AGC continued */ + if (state->wbd_ref != 0) + dib7000m_write_word(state, 102, state->wbd_ref); + else // use default + dib7000m_write_word(state, 102, agc->wbd_ref); + + dib7000m_write_word(state, 103, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) ); + dib7000m_write_word(state, 104, agc->agc1_max); + dib7000m_write_word(state, 105, agc->agc1_min); + dib7000m_write_word(state, 106, agc->agc2_max); + dib7000m_write_word(state, 107, agc->agc2_min); + dib7000m_write_word(state, 108, (agc->agc1_pt1 << 8) | agc->agc1_pt2 ); + dib7000m_write_word(state, 109, (agc->agc1_slope1 << 8) | agc->agc1_slope2); + dib7000m_write_word(state, 110, (agc->agc2_pt1 << 8) | agc->agc2_pt2); + dib7000m_write_word(state, 111, (agc->agc2_slope1 << 8) | agc->agc2_slope2); + + if (state->revision > 0x4000) { // settings for the MC + dib7000m_write_word(state, 71, agc->agc1_pt3); +// dprintk( "929: %x %d %d", +// (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2), agc->wbd_inv, agc->wbd_sel); + dib7000m_write_word(state, 929, (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); + } else { + // wrong default values + u16 b[9] = { 676, 696, 717, 737, 758, 778, 799, 819, 840 }; + for (i = 0; i < 9; i++) + dib7000m_write_word(state, 88 + i, b[i]); + } + return 0; +} + +static void dib7000m_update_timf(struct dib7000m_state *state) +{ + u32 timf = (dib7000m_read_word(state, 436) << 16) | dib7000m_read_word(state, 437); + state->timf = timf * 160 / (state->current_bandwidth / 50); + dib7000m_write_word(state, 23, (u16) (timf >> 16)); + dib7000m_write_word(state, 24, (u16) (timf & 0xffff)); + dprintk( "updated timf_frequency: %d (default: %d)",state->timf, state->timf_default); +} + +static int dib7000m_agc_startup(struct dvb_frontend *demod) +{ + struct dtv_frontend_properties *ch = &demod->dtv_property_cache; + struct dib7000m_state *state = demod->demodulator_priv; + u16 cfg_72 = dib7000m_read_word(state, 72); + int ret = -1; + u8 *agc_state = &state->agc_state; + u8 agc_split; + + switch (state->agc_state) { + case 0: + // set power-up level: interf+analog+AGC + dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC); + dib7000m_set_adc_state(state, DIBX000_ADC_ON); + + if (dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency/1000)) != 0) + return -1; + + ret = 7; /* ADC power up */ + (*agc_state)++; + break; + + case 1: + /* AGC initialization */ + if (state->cfg.agc_control) + state->cfg.agc_control(&state->demod, 1); + + dib7000m_write_word(state, 75, 32768); + if (!state->current_agc->perform_agc_softsplit) { + /* we are using the wbd - so slow AGC startup */ + dib7000m_write_word(state, 103, 1 << 8); /* force 0 split on WBD and restart AGC */ + (*agc_state)++; + ret = 5; + } else { + /* default AGC startup */ + (*agc_state) = 4; + /* wait AGC rough lock time */ + ret = 7; + } + + dib7000m_restart_agc(state); + break; + + case 2: /* fast split search path after 5sec */ + dib7000m_write_word(state, 72, cfg_72 | (1 << 4)); /* freeze AGC loop */ + dib7000m_write_word(state, 103, 2 << 9); /* fast split search 0.25kHz */ + (*agc_state)++; + ret = 14; + break; + + case 3: /* split search ended */ + agc_split = (u8)dib7000m_read_word(state, 392); /* store the split value for the next time */ + dib7000m_write_word(state, 75, dib7000m_read_word(state, 390)); /* set AGC gain start value */ + + dib7000m_write_word(state, 72, cfg_72 & ~(1 << 4)); /* std AGC loop */ + dib7000m_write_word(state, 103, (state->current_agc->wbd_alpha << 9) | agc_split); /* standard split search */ + + dib7000m_restart_agc(state); + + dprintk( "SPLIT %p: %hd", demod, agc_split); + + (*agc_state)++; + ret = 5; + break; + + case 4: /* LNA startup */ + /* wait AGC accurate lock time */ + ret = 7; + + if (dib7000m_update_lna(state)) + // wait only AGC rough lock time + ret = 5; + else + (*agc_state)++; + break; + + case 5: + dib7000m_agc_soft_split(state); + + if (state->cfg.agc_control) + state->cfg.agc_control(&state->demod, 0); + + (*agc_state)++; + break; + + default: + break; + } + return ret; +} + +static void dib7000m_set_channel(struct dib7000m_state *state, struct dtv_frontend_properties *ch, + u8 seq) +{ + u16 value, est[4]; + + dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz)); + + /* nfft, guard, qam, alpha */ + value = 0; + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: value |= (0 << 7); break; + case TRANSMISSION_MODE_4K: value |= (2 << 7); break; + default: + case TRANSMISSION_MODE_8K: value |= (1 << 7); break; + } + switch (ch->guard_interval) { + case GUARD_INTERVAL_1_32: value |= (0 << 5); break; + case GUARD_INTERVAL_1_16: value |= (1 << 5); break; + case GUARD_INTERVAL_1_4: value |= (3 << 5); break; + default: + case GUARD_INTERVAL_1_8: value |= (2 << 5); break; + } + switch (ch->modulation) { + case QPSK: value |= (0 << 3); break; + case QAM_16: value |= (1 << 3); break; + default: + case QAM_64: value |= (2 << 3); break; + } + switch (HIERARCHY_1) { + case HIERARCHY_2: value |= 2; break; + case HIERARCHY_4: value |= 4; break; + default: + case HIERARCHY_1: value |= 1; break; + } + dib7000m_write_word(state, 0, value); + dib7000m_write_word(state, 5, (seq << 4)); + + /* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */ + value = 0; + if (1 != 0) + value |= (1 << 6); + if (ch->hierarchy == 1) + value |= (1 << 4); + if (1 == 1) + value |= 1; + switch ((ch->hierarchy == 0 || 1 == 1) ? ch->code_rate_HP : ch->code_rate_LP) { + case FEC_2_3: value |= (2 << 1); break; + case FEC_3_4: value |= (3 << 1); break; + case FEC_5_6: value |= (5 << 1); break; + case FEC_7_8: value |= (7 << 1); break; + default: + case FEC_1_2: value |= (1 << 1); break; + } + dib7000m_write_word(state, 267 + state->reg_offs, value); + + /* offset loop parameters */ + + /* P_timf_alpha = 6, P_corm_alpha=6, P_corm_thres=0x80 */ + dib7000m_write_word(state, 26, (6 << 12) | (6 << 8) | 0x80); + + /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=1, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */ + dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (1 << 9) | (3 << 5) | (1 << 4) | (0x3)); + + /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max=3 */ + dib7000m_write_word(state, 32, (0 << 4) | 0x3); + + /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step=5 */ + dib7000m_write_word(state, 33, (0 << 4) | 0x5); + + /* P_dvsy_sync_wait */ + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_8K: value = 256; break; + case TRANSMISSION_MODE_4K: value = 128; break; + case TRANSMISSION_MODE_2K: + default: value = 64; break; + } + switch (ch->guard_interval) { + case GUARD_INTERVAL_1_16: value *= 2; break; + case GUARD_INTERVAL_1_8: value *= 4; break; + case GUARD_INTERVAL_1_4: value *= 8; break; + default: + case GUARD_INTERVAL_1_32: value *= 1; break; + } + state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO + + /* deactive the possibility of diversity reception if extended interleave - not for 7000MC */ + /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */ + if (1 == 1 || state->revision > 0x4000) + state->div_force_off = 0; + else + state->div_force_off = 1; + dib7000m_set_diversity_in(&state->demod, state->div_state); + + /* channel estimation fine configuration */ + switch (ch->modulation) { + case QAM_64: + est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */ + est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */ + est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ + est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */ + break; + case QAM_16: + est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */ + est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */ + est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ + est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */ + break; + default: + est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */ + est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */ + est[2] = 0x0333; /* P_adp_regul_ext 0.1 */ + est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */ + break; + } + for (value = 0; value < 4; value++) + dib7000m_write_word(state, 214 + value + state->reg_offs, est[value]); + + // set power-up level: autosearch + dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD); +} + +static int dib7000m_autosearch_start(struct dvb_frontend *demod) +{ + struct dtv_frontend_properties *ch = &demod->dtv_property_cache; + struct dib7000m_state *state = demod->demodulator_priv; + struct dtv_frontend_properties schan; + int ret = 0; + u32 value, factor; + + schan = *ch; + + schan.modulation = QAM_64; + schan.guard_interval = GUARD_INTERVAL_1_32; + schan.transmission_mode = TRANSMISSION_MODE_8K; + schan.code_rate_HP = FEC_2_3; + schan.code_rate_LP = FEC_3_4; + schan.hierarchy = 0; + + dib7000m_set_channel(state, &schan, 7); + + factor = BANDWIDTH_TO_KHZ(schan.bandwidth_hz); + if (factor >= 5000) + factor = 1; + else + factor = 6; + + // always use the setting for 8MHz here lock_time for 7,6 MHz are longer + value = 30 * state->internal_clk * factor; + ret |= dib7000m_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time + ret |= dib7000m_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time + value = 100 * state->internal_clk * factor; + ret |= dib7000m_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time + ret |= dib7000m_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time + value = 500 * state->internal_clk * factor; + ret |= dib7000m_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time + ret |= dib7000m_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time + + // start search + value = dib7000m_read_word(state, 0); + ret |= dib7000m_write_word(state, 0, (u16) (value | (1 << 9))); + + /* clear n_irq_pending */ + if (state->revision == 0x4000) + dib7000m_write_word(state, 1793, 0); + else + dib7000m_read_word(state, 537); + + ret |= dib7000m_write_word(state, 0, (u16) value); + + return ret; +} + +static int dib7000m_autosearch_irq(struct dib7000m_state *state, u16 reg) +{ + u16 irq_pending = dib7000m_read_word(state, reg); + + if (irq_pending & 0x1) { // failed + dprintk( "autosearch failed"); + return 1; + } + + if (irq_pending & 0x2) { // succeeded + dprintk( "autosearch succeeded"); + return 2; + } + return 0; // still pending +} + +static int dib7000m_autosearch_is_irq(struct dvb_frontend *demod) +{ + struct dib7000m_state *state = demod->demodulator_priv; + if (state->revision == 0x4000) + return dib7000m_autosearch_irq(state, 1793); + else + return dib7000m_autosearch_irq(state, 537); +} + +static int dib7000m_tune(struct dvb_frontend *demod) +{ + struct dtv_frontend_properties *ch = &demod->dtv_property_cache; + struct dib7000m_state *state = demod->demodulator_priv; + int ret = 0; + u16 value; + + // we are already tuned - just resuming from suspend + if (ch != NULL) + dib7000m_set_channel(state, ch, 0); + else + return -EINVAL; + + // restart demod + ret |= dib7000m_write_word(state, 898, 0x4000); + ret |= dib7000m_write_word(state, 898, 0x0000); + msleep(45); + + dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD); + /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */ + ret |= dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3)); + + // never achieved a lock before - wait for timfreq to update + if (state->timf == 0) + msleep(200); + + //dump_reg(state); + /* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */ + value = (6 << 8) | 0x80; + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: value |= (7 << 12); break; + case TRANSMISSION_MODE_4K: value |= (8 << 12); break; + default: + case TRANSMISSION_MODE_8K: value |= (9 << 12); break; + } + ret |= dib7000m_write_word(state, 26, value); + + /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */ + value = (0 << 4); + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: value |= 0x6; break; + case TRANSMISSION_MODE_4K: value |= 0x7; break; + default: + case TRANSMISSION_MODE_8K: value |= 0x8; break; + } + ret |= dib7000m_write_word(state, 32, value); + + /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */ + value = (0 << 4); + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: value |= 0x6; break; + case TRANSMISSION_MODE_4K: value |= 0x7; break; + default: + case TRANSMISSION_MODE_8K: value |= 0x8; break; + } + ret |= dib7000m_write_word(state, 33, value); + + // we achieved a lock - it's time to update the timf freq + if ((dib7000m_read_word(state, 535) >> 6) & 0x1) + dib7000m_update_timf(state); + + dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz)); + return ret; +} + +static int dib7000m_wakeup(struct dvb_frontend *demod) +{ + struct dib7000m_state *state = demod->demodulator_priv; + + dib7000m_set_power_mode(state, DIB7000M_POWER_ALL); + + if (dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0) + dprintk( "could not start Slow ADC"); + + return 0; +} + +static int dib7000m_sleep(struct dvb_frontend *demod) +{ + struct dib7000m_state *st = demod->demodulator_priv; + dib7000m_set_output_mode(st, OUTMODE_HIGH_Z); + dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY); + return dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) | + dib7000m_set_adc_state(st, DIBX000_ADC_OFF); +} + +static int dib7000m_identify(struct dib7000m_state *state) +{ + u16 value; + + if ((value = dib7000m_read_word(state, 896)) != 0x01b3) { + dprintk( "wrong Vendor ID (0x%x)",value); + return -EREMOTEIO; + } + + state->revision = dib7000m_read_word(state, 897); + if (state->revision != 0x4000 && + state->revision != 0x4001 && + state->revision != 0x4002 && + state->revision != 0x4003) { + dprintk( "wrong Device ID (0x%x)",value); + return -EREMOTEIO; + } + + /* protect this driver to be used with 7000PC */ + if (state->revision == 0x4000 && dib7000m_read_word(state, 769) == 0x4000) { + dprintk( "this driver does not work with DiB7000PC"); + return -EREMOTEIO; + } + + switch (state->revision) { + case 0x4000: dprintk( "found DiB7000MA/PA/MB/PB"); break; + case 0x4001: state->reg_offs = 1; dprintk( "found DiB7000HC"); break; + case 0x4002: state->reg_offs = 1; dprintk( "found DiB7000MC"); break; + case 0x4003: state->reg_offs = 1; dprintk( "found DiB9000"); break; + } + + return 0; +} + + +static int dib7000m_get_frontend(struct dvb_frontend* fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct dib7000m_state *state = fe->demodulator_priv; + u16 tps = dib7000m_read_word(state,480); + + fep->inversion = INVERSION_AUTO; + + fep->bandwidth_hz = BANDWIDTH_TO_HZ(state->current_bandwidth); + + switch ((tps >> 8) & 0x3) { + case 0: fep->transmission_mode = TRANSMISSION_MODE_2K; break; + case 1: fep->transmission_mode = TRANSMISSION_MODE_8K; break; + /* case 2: fep->transmission_mode = TRANSMISSION_MODE_4K; break; */ + } + + switch (tps & 0x3) { + case 0: fep->guard_interval = GUARD_INTERVAL_1_32; break; + case 1: fep->guard_interval = GUARD_INTERVAL_1_16; break; + case 2: fep->guard_interval = GUARD_INTERVAL_1_8; break; + case 3: fep->guard_interval = GUARD_INTERVAL_1_4; break; + } + + switch ((tps >> 14) & 0x3) { + case 0: fep->modulation = QPSK; break; + case 1: fep->modulation = QAM_16; break; + case 2: + default: fep->modulation = QAM_64; break; + } + + /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */ + /* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */ + + fep->hierarchy = HIERARCHY_NONE; + switch ((tps >> 5) & 0x7) { + case 1: fep->code_rate_HP = FEC_1_2; break; + case 2: fep->code_rate_HP = FEC_2_3; break; + case 3: fep->code_rate_HP = FEC_3_4; break; + case 5: fep->code_rate_HP = FEC_5_6; break; + case 7: + default: fep->code_rate_HP = FEC_7_8; break; + + } + + switch ((tps >> 2) & 0x7) { + case 1: fep->code_rate_LP = FEC_1_2; break; + case 2: fep->code_rate_LP = FEC_2_3; break; + case 3: fep->code_rate_LP = FEC_3_4; break; + case 5: fep->code_rate_LP = FEC_5_6; break; + case 7: + default: fep->code_rate_LP = FEC_7_8; break; + } + + /* native interleaver: (dib7000m_read_word(state, 481) >> 5) & 0x1 */ + + return 0; +} + +static int dib7000m_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct dib7000m_state *state = fe->demodulator_priv; + int time, ret; + + dib7000m_set_output_mode(state, OUTMODE_HIGH_Z); + + dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->bandwidth_hz)); + + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* start up the AGC */ + state->agc_state = 0; + do { + time = dib7000m_agc_startup(fe); + if (time != -1) + msleep(time); + } while (time != -1); + + if (fep->transmission_mode == TRANSMISSION_MODE_AUTO || + fep->guard_interval == GUARD_INTERVAL_AUTO || + fep->modulation == QAM_AUTO || + fep->code_rate_HP == FEC_AUTO) { + int i = 800, found; + + dib7000m_autosearch_start(fe); + do { + msleep(1); + found = dib7000m_autosearch_is_irq(fe); + } while (found == 0 && i--); + + dprintk("autosearch returns: %d",found); + if (found == 0 || found == 1) + return 0; // no channel found + + dib7000m_get_frontend(fe); + } + + ret = dib7000m_tune(fe); + + /* make this a config parameter */ + dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO); + return ret; +} + +static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat) +{ + struct dib7000m_state *state = fe->demodulator_priv; + u16 lock = dib7000m_read_word(state, 535); + + *stat = 0; + + if (lock & 0x8000) + *stat |= FE_HAS_SIGNAL; + if (lock & 0x3000) + *stat |= FE_HAS_CARRIER; + if (lock & 0x0100) + *stat |= FE_HAS_VITERBI; + if (lock & 0x0010) + *stat |= FE_HAS_SYNC; + if (lock & 0x0008) + *stat |= FE_HAS_LOCK; + + return 0; +} + +static int dib7000m_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct dib7000m_state *state = fe->demodulator_priv; + *ber = (dib7000m_read_word(state, 526) << 16) | dib7000m_read_word(state, 527); + return 0; +} + +static int dib7000m_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) +{ + struct dib7000m_state *state = fe->demodulator_priv; + *unc = dib7000m_read_word(state, 534); + return 0; +} + +static int dib7000m_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct dib7000m_state *state = fe->demodulator_priv; + u16 val = dib7000m_read_word(state, 390); + *strength = 65535 - val; + return 0; +} + +static int dib7000m_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + *snr = 0x0000; + return 0; +} + +static int dib7000m_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void dib7000m_release(struct dvb_frontend *demod) +{ + struct dib7000m_state *st = demod->demodulator_priv; + dibx000_exit_i2c_master(&st->i2c_master); + kfree(st); +} + +struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating) +{ + struct dib7000m_state *st = demod->demodulator_priv; + return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); +} +EXPORT_SYMBOL(dib7000m_get_i2c_master); + +int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) +{ + struct dib7000m_state *state = fe->demodulator_priv; + u16 val = dib7000m_read_word(state, 294 + state->reg_offs) & 0xffef; + val |= (onoff & 0x1) << 4; + dprintk("PID filter enabled %d", onoff); + return dib7000m_write_word(state, 294 + state->reg_offs, val); +} +EXPORT_SYMBOL(dib7000m_pid_filter_ctrl); + +int dib7000m_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +{ + struct dib7000m_state *state = fe->demodulator_priv; + dprintk("PID filter: index %x, PID %d, OnOff %d", id, pid, onoff); + return dib7000m_write_word(state, 300 + state->reg_offs + id, + onoff ? (1 << 13) | pid : 0); +} +EXPORT_SYMBOL(dib7000m_pid_filter); + +#if 0 +/* used with some prototype boards */ +int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, + u8 default_addr, struct dib7000m_config cfg[]) +{ + struct dib7000m_state st = { .i2c_adap = i2c }; + int k = 0; + u8 new_addr = 0; + + for (k = no_of_demods-1; k >= 0; k--) { + st.cfg = cfg[k]; + + /* designated i2c address */ + new_addr = (0x40 + k) << 1; + st.i2c_addr = new_addr; + if (dib7000m_identify(&st) != 0) { + st.i2c_addr = default_addr; + if (dib7000m_identify(&st) != 0) { + dprintk("DiB7000M #%d: not identified", k); + return -EIO; + } + } + + /* start diversity to pull_down div_str - just for i2c-enumeration */ + dib7000m_set_output_mode(&st, OUTMODE_DIVERSITY); + + dib7000m_write_word(&st, 1796, 0x0); // select DVB-T output + + /* set new i2c address and force divstart */ + dib7000m_write_word(&st, 1794, (new_addr << 2) | 0x2); + + dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr); + } + + for (k = 0; k < no_of_demods; k++) { + st.cfg = cfg[k]; + st.i2c_addr = (0x40 + k) << 1; + + // unforce divstr + dib7000m_write_word(&st,1794, st.i2c_addr << 2); + + /* deactivate div - it was just for i2c-enumeration */ + dib7000m_set_output_mode(&st, OUTMODE_HIGH_Z); + } + + return 0; +} +EXPORT_SYMBOL(dib7000m_i2c_enumeration); +#endif + +static struct dvb_frontend_ops dib7000m_ops; +struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg) +{ + struct dvb_frontend *demod; + struct dib7000m_state *st; + st = kzalloc(sizeof(struct dib7000m_state), GFP_KERNEL); + if (st == NULL) + return NULL; + + memcpy(&st->cfg, cfg, sizeof(struct dib7000m_config)); + st->i2c_adap = i2c_adap; + st->i2c_addr = i2c_addr; + + demod = &st->demod; + demod->demodulator_priv = st; + memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops)); + mutex_init(&st->i2c_buffer_lock); + + st->timf_default = cfg->bw->timf; + + if (dib7000m_identify(st) != 0) + goto error; + + if (st->revision == 0x4000) + dibx000_init_i2c_master(&st->i2c_master, DIB7000, st->i2c_adap, st->i2c_addr); + else + dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c_adap, st->i2c_addr); + + dib7000m_demod_reset(st); + + return demod; + +error: + kfree(st); + return NULL; +} +EXPORT_SYMBOL(dib7000m_attach); + +static struct dvb_frontend_ops dib7000m_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "DiBcom 7000MA/MB/PA/PB/MC", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib7000m_release, + + .init = dib7000m_wakeup, + .sleep = dib7000m_sleep, + + .set_frontend = dib7000m_set_frontend, + .get_tune_settings = dib7000m_fe_get_tune_settings, + .get_frontend = dib7000m_get_frontend, + + .read_status = dib7000m_read_status, + .read_ber = dib7000m_read_ber, + .read_signal_strength = dib7000m_read_signal_strength, + .read_snr = dib7000m_read_snr, + .read_ucblocks = dib7000m_read_unc_blocks, +}; + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Driver for the DiBcom 7000MA/MB/PA/PB/MC COFDM demodulator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dib7000m.h b/drivers/media/dvb-frontends/dib7000m.h new file mode 100644 index 00000000..b585413f --- /dev/null +++ b/drivers/media/dvb-frontends/dib7000m.h @@ -0,0 +1,91 @@ +#ifndef DIB7000M_H +#define DIB7000M_H + +#include + +#include "dibx000_common.h" + +struct dib7000m_config { + u8 dvbt_mode; + u8 output_mpeg2_in_188_bytes; + u8 hostbus_diversity; + u8 tuner_is_baseband; + u8 mobile_mode; + int (*update_lna) (struct dvb_frontend *, u16 agc_global); + + u8 agc_config_count; + struct dibx000_agc_config *agc; + + struct dibx000_bandwidth_config *bw; + +#define DIB7000M_GPIO_DEFAULT_DIRECTIONS 0xffff + u16 gpio_dir; +#define DIB7000M_GPIO_DEFAULT_VALUES 0x0000 + u16 gpio_val; +#define DIB7000M_GPIO_PWM_POS0(v) ((v & 0xf) << 12) +#define DIB7000M_GPIO_PWM_POS1(v) ((v & 0xf) << 8 ) +#define DIB7000M_GPIO_PWM_POS2(v) ((v & 0xf) << 4 ) +#define DIB7000M_GPIO_PWM_POS3(v) (v & 0xf) +#define DIB7000M_GPIO_DEFAULT_PWM_POS 0xffff + u16 gpio_pwm_pos; + + u16 pwm_freq_div; + + u8 quartz_direct; + + u8 input_clk_is_div_2; + + int (*agc_control) (struct dvb_frontend *, u8 before); +}; + +#define DEFAULT_DIB7000M_I2C_ADDRESS 18 + +#if IS_ENABLED(CONFIG_DVB_DIB7000M) +extern struct dvb_frontend *dib7000m_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000m_config *cfg); +extern struct i2c_adapter *dib7000m_get_i2c_master(struct dvb_frontend *, + enum dibx000_i2c_interface, + int); +extern int dib7000m_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff); +extern int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff); +#else +static inline +struct dvb_frontend *dib7000m_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, struct dib7000m_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline +struct i2c_adapter *dib7000m_get_i2c_master(struct dvb_frontend *demod, + enum dibx000_i2c_interface intf, + int gating) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static inline int dib7000m_pid_filter(struct dvb_frontend *fe, u8 id, + u16 pid, u8 onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe, + uint8_t onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +#endif + +/* TODO +extern INT dib7000m_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val); +extern INT dib7000m_enable_vbg_voltage(struct dibDemod *demod); +extern void dib7000m_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff); +extern USHORT dib7000m_get_current_agc_global(struct dibDemod *demod); +*/ + +#endif diff --git a/drivers/media/dvb-frontends/dib7000p.c b/drivers/media/dvb-frontends/dib7000p.c new file mode 100644 index 00000000..effb87f7 --- /dev/null +++ b/drivers/media/dvb-frontends/dib7000p.c @@ -0,0 +1,2472 @@ +/* + * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC). + * + * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#include +#include +#include +#include + +#include "dvb_math.h" +#include "dvb_frontend.h" + +#include "dib7000p.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +static int buggy_sfn_workaround; +module_param(buggy_sfn_workaround, int, 0644); +MODULE_PARM_DESC(buggy_sfn_workaround, "Enable work-around for buggy SFNs (default: 0)"); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P: "); printk(args); printk("\n"); } } while (0) + +struct i2c_device { + struct i2c_adapter *i2c_adap; + u8 i2c_addr; +}; + +struct dib7000p_state { + struct dvb_frontend demod; + struct dib7000p_config cfg; + + u8 i2c_addr; + struct i2c_adapter *i2c_adap; + + struct dibx000_i2c_master i2c_master; + + u16 wbd_ref; + + u8 current_band; + u32 current_bandwidth; + struct dibx000_agc_config *current_agc; + u32 timf; + + u8 div_force_off:1; + u8 div_state:1; + u16 div_sync_wait; + + u8 agc_state; + + u16 gpio_dir; + u16 gpio_val; + + u8 sfn_workaround_active:1; + +#define SOC7090 0x7090 + u16 version; + + u16 tuner_enable; + struct i2c_adapter dib7090_tuner_adap; + + /* for the I2C transfer */ + struct i2c_msg msg[2]; + u8 i2c_write_buffer[4]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; + + u8 input_mode_mpeg; +}; + +enum dib7000p_power_mode { + DIB7000P_POWER_ALL = 0, + DIB7000P_POWER_ANALOG_ADC, + DIB7000P_POWER_INTERFACE_ONLY, +}; + +/* dib7090 specific fonctions */ +static int dib7090_set_output_mode(struct dvb_frontend *fe, int mode); +static int dib7090_set_diversity_in(struct dvb_frontend *fe, int onoff); +static void dib7090_setDibTxMux(struct dib7000p_state *state, int mode); +static void dib7090_setHostBusMux(struct dib7000p_state *state, int mode); + +static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + state->i2c_write_buffer[0] = reg >> 8; + state->i2c_write_buffer[1] = reg & 0xff; + + memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c_addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 2; + state->msg[1].addr = state->i2c_addr >> 1; + state->msg[1].flags = I2C_M_RD; + state->msg[1].buf = state->i2c_read_buffer; + state->msg[1].len = 2; + + if (i2c_transfer(state->i2c_adap, state->msg, 2) != 2) + dprintk("i2c read error on %d", reg); + + ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1]; + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} + +static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + + state->i2c_write_buffer[0] = (reg >> 8) & 0xff; + state->i2c_write_buffer[1] = reg & 0xff; + state->i2c_write_buffer[2] = (val >> 8) & 0xff; + state->i2c_write_buffer[3] = val & 0xff; + + memset(&state->msg[0], 0, sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c_addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 4; + + ret = (i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ? + -EREMOTEIO : 0); + mutex_unlock(&state->i2c_buffer_lock); + return ret; +} + +static void dib7000p_write_tab(struct dib7000p_state *state, u16 * buf) +{ + u16 l = 0, r, *n; + n = buf; + l = *n++; + while (l) { + r = *n++; + + do { + dib7000p_write_word(state, r, *n++); + r++; + } while (--l); + l = *n++; + } +} + +static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode) +{ + int ret = 0; + u16 outreg, fifo_threshold, smo_mode; + + outreg = 0; + fifo_threshold = 1792; + smo_mode = (dib7000p_read_word(state, 235) & 0x0050) | (1 << 1); + + dprintk("setting output mode for demod %p to %d", &state->demod, mode); + + switch (mode) { + case OUTMODE_MPEG2_PAR_GATED_CLK: + outreg = (1 << 10); /* 0x0400 */ + break; + case OUTMODE_MPEG2_PAR_CONT_CLK: + outreg = (1 << 10) | (1 << 6); /* 0x0440 */ + break; + case OUTMODE_MPEG2_SERIAL: + outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0480 */ + break; + case OUTMODE_DIVERSITY: + if (state->cfg.hostbus_diversity) + outreg = (1 << 10) | (4 << 6); /* 0x0500 */ + else + outreg = (1 << 11); + break; + case OUTMODE_MPEG2_FIFO: + smo_mode |= (3 << 1); + fifo_threshold = 512; + outreg = (1 << 10) | (5 << 6); + break; + case OUTMODE_ANALOG_ADC: + outreg = (1 << 10) | (3 << 6); + break; + case OUTMODE_HIGH_Z: + outreg = 0; + break; + default: + dprintk("Unhandled output_mode passed to be set for demod %p", &state->demod); + break; + } + + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + + ret |= dib7000p_write_word(state, 235, smo_mode); + ret |= dib7000p_write_word(state, 236, fifo_threshold); /* synchronous fread */ + if (state->version != SOC7090) + ret |= dib7000p_write_word(state, 1286, outreg); /* P_Div_active */ + + return ret; +} + +static int dib7000p_set_diversity_in(struct dvb_frontend *demod, int onoff) +{ + struct dib7000p_state *state = demod->demodulator_priv; + + if (state->div_force_off) { + dprintk("diversity combination deactivated - forced by COFDM parameters"); + onoff = 0; + dib7000p_write_word(state, 207, 0); + } else + dib7000p_write_word(state, 207, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0)); + + state->div_state = (u8) onoff; + + if (onoff) { + dib7000p_write_word(state, 204, 6); + dib7000p_write_word(state, 205, 16); + /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */ + } else { + dib7000p_write_word(state, 204, 1); + dib7000p_write_word(state, 205, 0); + } + + return 0; +} + +static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode) +{ + /* by default everything is powered off */ + u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899 = 0x0003, reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff); + + /* now, depending on the requested mode, we power on */ + switch (mode) { + /* power up everything in the demod */ + case DIB7000P_POWER_ALL: + reg_774 = 0x0000; + reg_775 = 0x0000; + reg_776 = 0x0; + reg_899 = 0x0; + if (state->version == SOC7090) + reg_1280 &= 0x001f; + else + reg_1280 &= 0x01ff; + break; + + case DIB7000P_POWER_ANALOG_ADC: + /* dem, cfg, iqc, sad, agc */ + reg_774 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10) | (1 << 9)); + /* nud */ + reg_776 &= ~((1 << 0)); + /* Dout */ + if (state->version != SOC7090) + reg_1280 &= ~((1 << 11)); + reg_1280 &= ~(1 << 6); + /* fall through wanted to enable the interfaces */ + + /* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */ + case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */ + if (state->version == SOC7090) + reg_1280 &= ~((1 << 7) | (1 << 5)); + else + reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10)); + break; + +/* TODO following stuff is just converted from the dib7000-driver - check when is used what */ + } + + dib7000p_write_word(state, 774, reg_774); + dib7000p_write_word(state, 775, reg_775); + dib7000p_write_word(state, 776, reg_776); + dib7000p_write_word(state, 1280, reg_1280); + if (state->version != SOC7090) + dib7000p_write_word(state, 899, reg_899); + + return 0; +} + +static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no) +{ + u16 reg_908 = 0, reg_909 = 0; + u16 reg; + + if (state->version != SOC7090) { + reg_908 = dib7000p_read_word(state, 908); + reg_909 = dib7000p_read_word(state, 909); + } + + switch (no) { + case DIBX000_SLOW_ADC_ON: + if (state->version == SOC7090) { + reg = dib7000p_read_word(state, 1925); + + dib7000p_write_word(state, 1925, reg | (1 << 4) | (1 << 2)); /* en_slowAdc = 1 & reset_sladc = 1 */ + + reg = dib7000p_read_word(state, 1925); /* read acces to make it works... strange ... */ + msleep(200); + dib7000p_write_word(state, 1925, reg & ~(1 << 4)); /* en_slowAdc = 1 & reset_sladc = 0 */ + + reg = dib7000p_read_word(state, 72) & ~((0x3 << 14) | (0x3 << 12)); + dib7000p_write_word(state, 72, reg | (1 << 14) | (3 << 12) | 524); /* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ; (Vin2 = Vcm) */ + } else { + reg_909 |= (1 << 1) | (1 << 0); + dib7000p_write_word(state, 909, reg_909); + reg_909 &= ~(1 << 1); + } + break; + + case DIBX000_SLOW_ADC_OFF: + if (state->version == SOC7090) { + reg = dib7000p_read_word(state, 1925); + dib7000p_write_word(state, 1925, (reg & ~(1 << 2)) | (1 << 4)); /* reset_sladc = 1 en_slowAdc = 0 */ + } else + reg_909 |= (1 << 1) | (1 << 0); + break; + + case DIBX000_ADC_ON: + reg_908 &= 0x0fff; + reg_909 &= 0x0003; + break; + + case DIBX000_ADC_OFF: + reg_908 |= (1 << 14) | (1 << 13) | (1 << 12); + reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2); + break; + + case DIBX000_VBG_ENABLE: + reg_908 &= ~(1 << 15); + break; + + case DIBX000_VBG_DISABLE: + reg_908 |= (1 << 15); + break; + + default: + break; + } + +// dprintk( "908: %x, 909: %x\n", reg_908, reg_909); + + reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4; + reg_908 |= (state->cfg.enable_current_mirror & 1) << 7; + + if (state->version != SOC7090) { + dib7000p_write_word(state, 908, reg_908); + dib7000p_write_word(state, 909, reg_909); + } +} + +static int dib7000p_set_bandwidth(struct dib7000p_state *state, u32 bw) +{ + u32 timf; + + // store the current bandwidth for later use + state->current_bandwidth = bw; + + if (state->timf == 0) { + dprintk("using default timf"); + timf = state->cfg.bw->timf; + } else { + dprintk("using updated timf"); + timf = state->timf; + } + + timf = timf * (bw / 50) / 160; + + dib7000p_write_word(state, 23, (u16) ((timf >> 16) & 0xffff)); + dib7000p_write_word(state, 24, (u16) ((timf) & 0xffff)); + + return 0; +} + +static int dib7000p_sad_calib(struct dib7000p_state *state) +{ +/* internal */ + dib7000p_write_word(state, 73, (0 << 1) | (0 << 0)); + + if (state->version == SOC7090) + dib7000p_write_word(state, 74, 2048); + else + dib7000p_write_word(state, 74, 776); + + /* do the calibration */ + dib7000p_write_word(state, 73, (1 << 0)); + dib7000p_write_word(state, 73, (0 << 0)); + + msleep(1); + + return 0; +} + +int dib7000p_set_wbd_ref(struct dvb_frontend *demod, u16 value) +{ + struct dib7000p_state *state = demod->demodulator_priv; + if (value > 4095) + value = 4095; + state->wbd_ref = value; + return dib7000p_write_word(state, 105, (dib7000p_read_word(state, 105) & 0xf000) | value); +} +EXPORT_SYMBOL(dib7000p_set_wbd_ref); + +int dib7000p_get_agc_values(struct dvb_frontend *fe, + u16 *agc_global, u16 *agc1, u16 *agc2, u16 *wbd) +{ + struct dib7000p_state *state = fe->demodulator_priv; + + if (agc_global != NULL) + *agc_global = dib7000p_read_word(state, 394); + if (agc1 != NULL) + *agc1 = dib7000p_read_word(state, 392); + if (agc2 != NULL) + *agc2 = dib7000p_read_word(state, 393); + if (wbd != NULL) + *wbd = dib7000p_read_word(state, 397); + + return 0; +} +EXPORT_SYMBOL(dib7000p_get_agc_values); + +int dib7000p_set_agc1_min(struct dvb_frontend *fe, u16 v) +{ + struct dib7000p_state *state = fe->demodulator_priv; + return dib7000p_write_word(state, 108, v); +} +EXPORT_SYMBOL(dib7000p_set_agc1_min); + +static void dib7000p_reset_pll(struct dib7000p_state *state) +{ + struct dibx000_bandwidth_config *bw = &state->cfg.bw[0]; + u16 clk_cfg0; + + if (state->version == SOC7090) { + dib7000p_write_word(state, 1856, (!bw->pll_reset << 13) | (bw->pll_range << 12) | (bw->pll_ratio << 6) | (bw->pll_prediv)); + + while (((dib7000p_read_word(state, 1856) >> 15) & 0x1) != 1) + ; + + dib7000p_write_word(state, 1857, dib7000p_read_word(state, 1857) | (!bw->pll_bypass << 15)); + } else { + /* force PLL bypass */ + clk_cfg0 = (1 << 15) | ((bw->pll_ratio & 0x3f) << 9) | + (bw->modulo << 7) | (bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0); + + dib7000p_write_word(state, 900, clk_cfg0); + + /* P_pll_cfg */ + dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset); + clk_cfg0 = (bw->pll_bypass << 15) | (clk_cfg0 & 0x7fff); + dib7000p_write_word(state, 900, clk_cfg0); + } + + dib7000p_write_word(state, 18, (u16) (((bw->internal * 1000) >> 16) & 0xffff)); + dib7000p_write_word(state, 19, (u16) ((bw->internal * 1000) & 0xffff)); + dib7000p_write_word(state, 21, (u16) ((bw->ifreq >> 16) & 0xffff)); + dib7000p_write_word(state, 22, (u16) ((bw->ifreq) & 0xffff)); + + dib7000p_write_word(state, 72, bw->sad_cfg); +} + +static u32 dib7000p_get_internal_freq(struct dib7000p_state *state) +{ + u32 internal = (u32) dib7000p_read_word(state, 18) << 16; + internal |= (u32) dib7000p_read_word(state, 19); + internal /= 1000; + + return internal; +} + +int dib7000p_update_pll(struct dvb_frontend *fe, struct dibx000_bandwidth_config *bw) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 reg_1857, reg_1856 = dib7000p_read_word(state, 1856); + u8 loopdiv, prediv; + u32 internal, xtal; + + /* get back old values */ + prediv = reg_1856 & 0x3f; + loopdiv = (reg_1856 >> 6) & 0x3f; + + if ((bw != NULL) && (bw->pll_prediv != prediv || bw->pll_ratio != loopdiv)) { + dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)", prediv, bw->pll_prediv, loopdiv, bw->pll_ratio); + reg_1856 &= 0xf000; + reg_1857 = dib7000p_read_word(state, 1857); + dib7000p_write_word(state, 1857, reg_1857 & ~(1 << 15)); + + dib7000p_write_word(state, 1856, reg_1856 | ((bw->pll_ratio & 0x3f) << 6) | (bw->pll_prediv & 0x3f)); + + /* write new system clk into P_sec_len */ + internal = dib7000p_get_internal_freq(state); + xtal = (internal / loopdiv) * prediv; + internal = 1000 * (xtal / bw->pll_prediv) * bw->pll_ratio; /* new internal */ + dib7000p_write_word(state, 18, (u16) ((internal >> 16) & 0xffff)); + dib7000p_write_word(state, 19, (u16) (internal & 0xffff)); + + dib7000p_write_word(state, 1857, reg_1857 | (1 << 15)); + + while (((dib7000p_read_word(state, 1856) >> 15) & 0x1) != 1) + dprintk("Waiting for PLL to lock"); + + return 0; + } + return -EIO; +} +EXPORT_SYMBOL(dib7000p_update_pll); + +static int dib7000p_reset_gpio(struct dib7000p_state *st) +{ + /* reset the GPIOs */ + dprintk("gpio dir: %x: val: %x, pwm_pos: %x", st->gpio_dir, st->gpio_val, st->cfg.gpio_pwm_pos); + + dib7000p_write_word(st, 1029, st->gpio_dir); + dib7000p_write_word(st, 1030, st->gpio_val); + + /* TODO 1031 is P_gpio_od */ + + dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos); + + dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div); + return 0; +} + +static int dib7000p_cfg_gpio(struct dib7000p_state *st, u8 num, u8 dir, u8 val) +{ + st->gpio_dir = dib7000p_read_word(st, 1029); + st->gpio_dir &= ~(1 << num); /* reset the direction bit */ + st->gpio_dir |= (dir & 0x1) << num; /* set the new direction */ + dib7000p_write_word(st, 1029, st->gpio_dir); + + st->gpio_val = dib7000p_read_word(st, 1030); + st->gpio_val &= ~(1 << num); /* reset the direction bit */ + st->gpio_val |= (val & 0x01) << num; /* set the new value */ + dib7000p_write_word(st, 1030, st->gpio_val); + + return 0; +} + +int dib7000p_set_gpio(struct dvb_frontend *demod, u8 num, u8 dir, u8 val) +{ + struct dib7000p_state *state = demod->demodulator_priv; + return dib7000p_cfg_gpio(state, num, dir, val); +} +EXPORT_SYMBOL(dib7000p_set_gpio); + +static u16 dib7000p_defaults[] = { + // auto search configuration + 3, 2, + 0x0004, + (1<<3)|(1<<11)|(1<<12)|(1<<13), + 0x0814, /* Equal Lock */ + + 12, 6, + 0x001b, + 0x7740, + 0x005b, + 0x8d80, + 0x01c9, + 0xc380, + 0x0000, + 0x0080, + 0x0000, + 0x0090, + 0x0001, + 0xd4c0, + + 1, 26, + 0x6680, + + /* set ADC level to -16 */ + 11, 79, + (1 << 13) - 825 - 117, + (1 << 13) - 837 - 117, + (1 << 13) - 811 - 117, + (1 << 13) - 766 - 117, + (1 << 13) - 737 - 117, + (1 << 13) - 693 - 117, + (1 << 13) - 648 - 117, + (1 << 13) - 619 - 117, + (1 << 13) - 575 - 117, + (1 << 13) - 531 - 117, + (1 << 13) - 501 - 117, + + 1, 142, + 0x0410, + + /* disable power smoothing */ + 8, 145, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + + 1, 154, + 1 << 13, + + 1, 168, + 0x0ccd, + + 1, 183, + 0x200f, + + 1, 212, + 0x169, + + 5, 187, + 0x023d, + 0x00a4, + 0x00a4, + 0x7ff0, + 0x3ccc, + + 1, 198, + 0x800, + + 1, 222, + 0x0010, + + 1, 235, + 0x0062, + + 0, +}; + +static int dib7000p_demod_reset(struct dib7000p_state *state) +{ + dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); + + if (state->version == SOC7090) + dibx000_reset_i2c_master(&state->i2c_master); + + dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE); + + /* restart all parts */ + dib7000p_write_word(state, 770, 0xffff); + dib7000p_write_word(state, 771, 0xffff); + dib7000p_write_word(state, 772, 0x001f); + dib7000p_write_word(state, 1280, 0x001f - ((1 << 4) | (1 << 3))); + + dib7000p_write_word(state, 770, 0); + dib7000p_write_word(state, 771, 0); + dib7000p_write_word(state, 772, 0); + dib7000p_write_word(state, 1280, 0); + + if (state->version != SOC7090) { + dib7000p_write_word(state, 898, 0x0003); + dib7000p_write_word(state, 898, 0); + } + + /* default */ + dib7000p_reset_pll(state); + + if (dib7000p_reset_gpio(state) != 0) + dprintk("GPIO reset was not successful."); + + if (state->version == SOC7090) { + dib7000p_write_word(state, 899, 0); + + /* impulse noise */ + dib7000p_write_word(state, 42, (1<<5) | 3); /* P_iqc_thsat_ipc = 1 ; P_iqc_win2 = 3 */ + dib7000p_write_word(state, 43, 0x2d4); /*-300 fag P_iqc_dect_min = -280 */ + dib7000p_write_word(state, 44, 300); /* 300 fag P_iqc_dect_min = +280 */ + dib7000p_write_word(state, 273, (0<<6) | 30); + } + if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0) + dprintk("OUTPUT_MODE could not be reset."); + + dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON); + dib7000p_sad_calib(state); + dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_OFF); + + /* unforce divstr regardless whether i2c enumeration was done or not */ + dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1)); + + dib7000p_set_bandwidth(state, 8000); + + if (state->version == SOC7090) { + dib7000p_write_word(state, 36, 0x0755);/* P_iqc_impnc_on =1 & P_iqc_corr_inh = 1 for impulsive noise */ + } else { + if (state->cfg.tuner_is_baseband) + dib7000p_write_word(state, 36, 0x0755); + else + dib7000p_write_word(state, 36, 0x1f55); + } + + dib7000p_write_tab(state, dib7000p_defaults); + if (state->version != SOC7090) { + dib7000p_write_word(state, 901, 0x0006); + dib7000p_write_word(state, 902, (3 << 10) | (1 << 6)); + dib7000p_write_word(state, 905, 0x2c8e); + } + + dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); + + return 0; +} + +static void dib7000p_pll_clk_cfg(struct dib7000p_state *state) +{ + u16 tmp = 0; + tmp = dib7000p_read_word(state, 903); + dib7000p_write_word(state, 903, (tmp | 0x1)); + tmp = dib7000p_read_word(state, 900); + dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6)); +} + +static void dib7000p_restart_agc(struct dib7000p_state *state) +{ + // P_restart_iqc & P_restart_agc + dib7000p_write_word(state, 770, (1 << 11) | (1 << 9)); + dib7000p_write_word(state, 770, 0x0000); +} + +static int dib7000p_update_lna(struct dib7000p_state *state) +{ + u16 dyn_gain; + + if (state->cfg.update_lna) { + dyn_gain = dib7000p_read_word(state, 394); + if (state->cfg.update_lna(&state->demod, dyn_gain)) { + dib7000p_restart_agc(state); + return 1; + } + } + + return 0; +} + +static int dib7000p_set_agc_config(struct dib7000p_state *state, u8 band) +{ + struct dibx000_agc_config *agc = NULL; + int i; + if (state->current_band == band && state->current_agc != NULL) + return 0; + state->current_band = band; + + for (i = 0; i < state->cfg.agc_config_count; i++) + if (state->cfg.agc[i].band_caps & band) { + agc = &state->cfg.agc[i]; + break; + } + + if (agc == NULL) { + dprintk("no valid AGC configuration found for band 0x%02x", band); + return -EINVAL; + } + + state->current_agc = agc; + + /* AGC */ + dib7000p_write_word(state, 75, agc->setup); + dib7000p_write_word(state, 76, agc->inv_gain); + dib7000p_write_word(state, 77, agc->time_stabiliz); + dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock); + + // Demod AGC loop configuration + dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp); + dib7000p_write_word(state, 102, (agc->beta_mant << 6) | agc->beta_exp); + + /* AGC continued */ + dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d", + state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); + + if (state->wbd_ref != 0) + dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref); + else + dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref); + + dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8)); + + dib7000p_write_word(state, 107, agc->agc1_max); + dib7000p_write_word(state, 108, agc->agc1_min); + dib7000p_write_word(state, 109, agc->agc2_max); + dib7000p_write_word(state, 110, agc->agc2_min); + dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2); + dib7000p_write_word(state, 112, agc->agc1_pt3); + dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2); + dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2); + dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); + return 0; +} + +static void dib7000p_set_dds(struct dib7000p_state *state, s32 offset_khz) +{ + u32 internal = dib7000p_get_internal_freq(state); + s32 unit_khz_dds_val = 67108864 / (internal); /* 2**26 / Fsampling is the unit 1KHz offset */ + u32 abs_offset_khz = ABS(offset_khz); + u32 dds = state->cfg.bw->ifreq & 0x1ffffff; + u8 invert = !!(state->cfg.bw->ifreq & (1 << 25)); + + dprintk("setting a frequency offset of %dkHz internal freq = %d invert = %d", offset_khz, internal, invert); + + if (offset_khz < 0) + unit_khz_dds_val *= -1; + + /* IF tuner */ + if (invert) + dds -= (abs_offset_khz * unit_khz_dds_val); /* /100 because of /100 on the unit_khz_dds_val line calc for better accuracy */ + else + dds += (abs_offset_khz * unit_khz_dds_val); + + if (abs_offset_khz <= (internal / 2)) { /* Max dds offset is the half of the demod freq */ + dib7000p_write_word(state, 21, (u16) (((dds >> 16) & 0x1ff) | (0 << 10) | (invert << 9))); + dib7000p_write_word(state, 22, (u16) (dds & 0xffff)); + } +} + +static int dib7000p_agc_startup(struct dvb_frontend *demod) +{ + struct dtv_frontend_properties *ch = &demod->dtv_property_cache; + struct dib7000p_state *state = demod->demodulator_priv; + int ret = -1; + u8 *agc_state = &state->agc_state; + u8 agc_split; + u16 reg; + u32 upd_demod_gain_period = 0x1000; + s32 frequency_offset = 0; + + switch (state->agc_state) { + case 0: + dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); + if (state->version == SOC7090) { + reg = dib7000p_read_word(state, 0x79b) & 0xff00; + dib7000p_write_word(state, 0x79a, upd_demod_gain_period & 0xFFFF); /* lsb */ + dib7000p_write_word(state, 0x79b, reg | (1 << 14) | ((upd_demod_gain_period >> 16) & 0xFF)); + + /* enable adc i & q */ + reg = dib7000p_read_word(state, 0x780); + dib7000p_write_word(state, 0x780, (reg | (0x3)) & (~(1 << 7))); + } else { + dib7000p_set_adc_state(state, DIBX000_ADC_ON); + dib7000p_pll_clk_cfg(state); + } + + if (dib7000p_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency / 1000)) != 0) + return -1; + + if (demod->ops.tuner_ops.get_frequency) { + u32 frequency_tuner; + + demod->ops.tuner_ops.get_frequency(demod, &frequency_tuner); + frequency_offset = (s32)frequency_tuner / 1000 - ch->frequency / 1000; + } + + dib7000p_set_dds(state, frequency_offset); + ret = 7; + (*agc_state)++; + break; + + case 1: + if (state->cfg.agc_control) + state->cfg.agc_control(&state->demod, 1); + + dib7000p_write_word(state, 78, 32768); + if (!state->current_agc->perform_agc_softsplit) { + /* we are using the wbd - so slow AGC startup */ + /* force 0 split on WBD and restart AGC */ + dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | (1 << 8)); + (*agc_state)++; + ret = 5; + } else { + /* default AGC startup */ + (*agc_state) = 4; + /* wait AGC rough lock time */ + ret = 7; + } + + dib7000p_restart_agc(state); + break; + + case 2: /* fast split search path after 5sec */ + dib7000p_write_word(state, 75, state->current_agc->setup | (1 << 4)); /* freeze AGC loop */ + dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (2 << 9) | (0 << 8)); /* fast split search 0.25kHz */ + (*agc_state)++; + ret = 14; + break; + + case 3: /* split search ended */ + agc_split = (u8) dib7000p_read_word(state, 396); /* store the split value for the next time */ + dib7000p_write_word(state, 78, dib7000p_read_word(state, 394)); /* set AGC gain start value */ + + dib7000p_write_word(state, 75, state->current_agc->setup); /* std AGC loop */ + dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | agc_split); /* standard split search */ + + dib7000p_restart_agc(state); + + dprintk("SPLIT %p: %hd", demod, agc_split); + + (*agc_state)++; + ret = 5; + break; + + case 4: /* LNA startup */ + ret = 7; + + if (dib7000p_update_lna(state)) + ret = 5; + else + (*agc_state)++; + break; + + case 5: + if (state->cfg.agc_control) + state->cfg.agc_control(&state->demod, 0); + (*agc_state)++; + break; + default: + break; + } + return ret; +} + +static void dib7000p_update_timf(struct dib7000p_state *state) +{ + u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428); + state->timf = timf * 160 / (state->current_bandwidth / 50); + dib7000p_write_word(state, 23, (u16) (timf >> 16)); + dib7000p_write_word(state, 24, (u16) (timf & 0xffff)); + dprintk("updated timf_frequency: %d (default: %d)", state->timf, state->cfg.bw->timf); + +} + +u32 dib7000p_ctrl_timf(struct dvb_frontend *fe, u8 op, u32 timf) +{ + struct dib7000p_state *state = fe->demodulator_priv; + switch (op) { + case DEMOD_TIMF_SET: + state->timf = timf; + break; + case DEMOD_TIMF_UPDATE: + dib7000p_update_timf(state); + break; + case DEMOD_TIMF_GET: + break; + } + dib7000p_set_bandwidth(state, state->current_bandwidth); + return state->timf; +} +EXPORT_SYMBOL(dib7000p_ctrl_timf); + +static void dib7000p_set_channel(struct dib7000p_state *state, + struct dtv_frontend_properties *ch, u8 seq) +{ + u16 value, est[4]; + + dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz)); + + /* nfft, guard, qam, alpha */ + value = 0; + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: + value |= (0 << 7); + break; + case TRANSMISSION_MODE_4K: + value |= (2 << 7); + break; + default: + case TRANSMISSION_MODE_8K: + value |= (1 << 7); + break; + } + switch (ch->guard_interval) { + case GUARD_INTERVAL_1_32: + value |= (0 << 5); + break; + case GUARD_INTERVAL_1_16: + value |= (1 << 5); + break; + case GUARD_INTERVAL_1_4: + value |= (3 << 5); + break; + default: + case GUARD_INTERVAL_1_8: + value |= (2 << 5); + break; + } + switch (ch->modulation) { + case QPSK: + value |= (0 << 3); + break; + case QAM_16: + value |= (1 << 3); + break; + default: + case QAM_64: + value |= (2 << 3); + break; + } + switch (HIERARCHY_1) { + case HIERARCHY_2: + value |= 2; + break; + case HIERARCHY_4: + value |= 4; + break; + default: + case HIERARCHY_1: + value |= 1; + break; + } + dib7000p_write_word(state, 0, value); + dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */ + + /* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */ + value = 0; + if (1 != 0) + value |= (1 << 6); + if (ch->hierarchy == 1) + value |= (1 << 4); + if (1 == 1) + value |= 1; + switch ((ch->hierarchy == 0 || 1 == 1) ? ch->code_rate_HP : ch->code_rate_LP) { + case FEC_2_3: + value |= (2 << 1); + break; + case FEC_3_4: + value |= (3 << 1); + break; + case FEC_5_6: + value |= (5 << 1); + break; + case FEC_7_8: + value |= (7 << 1); + break; + default: + case FEC_1_2: + value |= (1 << 1); + break; + } + dib7000p_write_word(state, 208, value); + + /* offset loop parameters */ + dib7000p_write_word(state, 26, 0x6680); + dib7000p_write_word(state, 32, 0x0003); + dib7000p_write_word(state, 29, 0x1273); + dib7000p_write_word(state, 33, 0x0005); + + /* P_dvsy_sync_wait */ + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_8K: + value = 256; + break; + case TRANSMISSION_MODE_4K: + value = 128; + break; + case TRANSMISSION_MODE_2K: + default: + value = 64; + break; + } + switch (ch->guard_interval) { + case GUARD_INTERVAL_1_16: + value *= 2; + break; + case GUARD_INTERVAL_1_8: + value *= 4; + break; + case GUARD_INTERVAL_1_4: + value *= 8; + break; + default: + case GUARD_INTERVAL_1_32: + value *= 1; + break; + } + if (state->cfg.diversity_delay == 0) + state->div_sync_wait = (value * 3) / 2 + 48; + else + state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; + + /* deactive the possibility of diversity reception if extended interleaver */ + state->div_force_off = !1 && ch->transmission_mode != TRANSMISSION_MODE_8K; + dib7000p_set_diversity_in(&state->demod, state->div_state); + + /* channel estimation fine configuration */ + switch (ch->modulation) { + case QAM_64: + est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */ + est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */ + est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ + est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */ + break; + case QAM_16: + est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */ + est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */ + est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ + est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */ + break; + default: + est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */ + est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */ + est[2] = 0x0333; /* P_adp_regul_ext 0.1 */ + est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */ + break; + } + for (value = 0; value < 4; value++) + dib7000p_write_word(state, 187 + value, est[value]); +} + +static int dib7000p_autosearch_start(struct dvb_frontend *demod) +{ + struct dtv_frontend_properties *ch = &demod->dtv_property_cache; + struct dib7000p_state *state = demod->demodulator_priv; + struct dtv_frontend_properties schan; + u32 value, factor; + u32 internal = dib7000p_get_internal_freq(state); + + schan = *ch; + schan.modulation = QAM_64; + schan.guard_interval = GUARD_INTERVAL_1_32; + schan.transmission_mode = TRANSMISSION_MODE_8K; + schan.code_rate_HP = FEC_2_3; + schan.code_rate_LP = FEC_3_4; + schan.hierarchy = 0; + + dib7000p_set_channel(state, &schan, 7); + + factor = BANDWIDTH_TO_KHZ(ch->bandwidth_hz); + if (factor >= 5000) { + if (state->version == SOC7090) + factor = 2; + else + factor = 1; + } else + factor = 6; + + value = 30 * internal * factor; + dib7000p_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); + dib7000p_write_word(state, 7, (u16) (value & 0xffff)); + value = 100 * internal * factor; + dib7000p_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); + dib7000p_write_word(state, 9, (u16) (value & 0xffff)); + value = 500 * internal * factor; + dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); + dib7000p_write_word(state, 11, (u16) (value & 0xffff)); + + value = dib7000p_read_word(state, 0); + dib7000p_write_word(state, 0, (u16) ((1 << 9) | value)); + dib7000p_read_word(state, 1284); + dib7000p_write_word(state, 0, (u16) value); + + return 0; +} + +static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod) +{ + struct dib7000p_state *state = demod->demodulator_priv; + u16 irq_pending = dib7000p_read_word(state, 1284); + + if (irq_pending & 0x1) + return 1; + + if (irq_pending & 0x2) + return 2; + + return 0; +} + +static void dib7000p_spur_protect(struct dib7000p_state *state, u32 rf_khz, u32 bw) +{ + static s16 notch[] = { 16143, 14402, 12238, 9713, 6902, 3888, 759, -2392 }; + static u8 sine[] = { 0, 2, 3, 5, 6, 8, 9, 11, 13, 14, 16, 17, 19, 20, 22, + 24, 25, 27, 28, 30, 31, 33, 34, 36, 38, 39, 41, 42, 44, 45, 47, 48, 50, 51, + 53, 55, 56, 58, 59, 61, 62, 64, 65, 67, 68, 70, 71, 73, 74, 76, 77, 79, 80, + 82, 83, 85, 86, 88, 89, 91, 92, 94, 95, 97, 98, 99, 101, 102, 104, 105, + 107, 108, 109, 111, 112, 114, 115, 117, 118, 119, 121, 122, 123, 125, 126, + 128, 129, 130, 132, 133, 134, 136, 137, 138, 140, 141, 142, 144, 145, 146, + 147, 149, 150, 151, 152, 154, 155, 156, 157, 159, 160, 161, 162, 164, 165, + 166, 167, 168, 170, 171, 172, 173, 174, 175, 177, 178, 179, 180, 181, 182, + 183, 184, 185, 186, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, + 199, 200, 201, 202, 203, 204, 205, 206, 207, 207, 208, 209, 210, 211, 212, + 213, 214, 215, 215, 216, 217, 218, 219, 220, 220, 221, 222, 223, 224, 224, + 225, 226, 227, 227, 228, 229, 229, 230, 231, 231, 232, 233, 233, 234, 235, + 235, 236, 237, 237, 238, 238, 239, 239, 240, 241, 241, 242, 242, 243, 243, + 244, 244, 245, 245, 245, 246, 246, 247, 247, 248, 248, 248, 249, 249, 249, + 250, 250, 250, 251, 251, 251, 252, 252, 252, 252, 253, 253, 253, 253, 254, + 254, 254, 254, 254, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + 255, 255, 255, 255, 255, 255 + }; + + u32 xtal = state->cfg.bw->xtal_hz / 1000; + int f_rel = DIV_ROUND_CLOSEST(rf_khz, xtal) * xtal - rf_khz; + int k; + int coef_re[8], coef_im[8]; + int bw_khz = bw; + u32 pha; + + dprintk("relative position of the Spur: %dk (RF: %dk, XTAL: %dk)", f_rel, rf_khz, xtal); + + if (f_rel < -bw_khz / 2 || f_rel > bw_khz / 2) + return; + + bw_khz /= 100; + + dib7000p_write_word(state, 142, 0x0610); + + for (k = 0; k < 8; k++) { + pha = ((f_rel * (k + 1) * 112 * 80 / bw_khz) / 1000) & 0x3ff; + + if (pha == 0) { + coef_re[k] = 256; + coef_im[k] = 0; + } else if (pha < 256) { + coef_re[k] = sine[256 - (pha & 0xff)]; + coef_im[k] = sine[pha & 0xff]; + } else if (pha == 256) { + coef_re[k] = 0; + coef_im[k] = 256; + } else if (pha < 512) { + coef_re[k] = -sine[pha & 0xff]; + coef_im[k] = sine[256 - (pha & 0xff)]; + } else if (pha == 512) { + coef_re[k] = -256; + coef_im[k] = 0; + } else if (pha < 768) { + coef_re[k] = -sine[256 - (pha & 0xff)]; + coef_im[k] = -sine[pha & 0xff]; + } else if (pha == 768) { + coef_re[k] = 0; + coef_im[k] = -256; + } else { + coef_re[k] = sine[pha & 0xff]; + coef_im[k] = -sine[256 - (pha & 0xff)]; + } + + coef_re[k] *= notch[k]; + coef_re[k] += (1 << 14); + if (coef_re[k] >= (1 << 24)) + coef_re[k] = (1 << 24) - 1; + coef_re[k] /= (1 << 15); + + coef_im[k] *= notch[k]; + coef_im[k] += (1 << 14); + if (coef_im[k] >= (1 << 24)) + coef_im[k] = (1 << 24) - 1; + coef_im[k] /= (1 << 15); + + dprintk("PALF COEF: %d re: %d im: %d", k, coef_re[k], coef_im[k]); + + dib7000p_write_word(state, 143, (0 << 14) | (k << 10) | (coef_re[k] & 0x3ff)); + dib7000p_write_word(state, 144, coef_im[k] & 0x3ff); + dib7000p_write_word(state, 143, (1 << 14) | (k << 10) | (coef_re[k] & 0x3ff)); + } + dib7000p_write_word(state, 143, 0); +} + +static int dib7000p_tune(struct dvb_frontend *demod) +{ + struct dtv_frontend_properties *ch = &demod->dtv_property_cache; + struct dib7000p_state *state = demod->demodulator_priv; + u16 tmp = 0; + + if (ch != NULL) + dib7000p_set_channel(state, ch, 0); + else + return -EINVAL; + + // restart demod + dib7000p_write_word(state, 770, 0x4000); + dib7000p_write_word(state, 770, 0x0000); + msleep(45); + + /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */ + tmp = (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3); + if (state->sfn_workaround_active) { + dprintk("SFN workaround is active"); + tmp |= (1 << 9); + dib7000p_write_word(state, 166, 0x4000); + } else { + dib7000p_write_word(state, 166, 0x0000); + } + dib7000p_write_word(state, 29, tmp); + + // never achieved a lock with that bandwidth so far - wait for osc-freq to update + if (state->timf == 0) + msleep(200); + + /* offset loop parameters */ + + /* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */ + tmp = (6 << 8) | 0x80; + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: + tmp |= (2 << 12); + break; + case TRANSMISSION_MODE_4K: + tmp |= (3 << 12); + break; + default: + case TRANSMISSION_MODE_8K: + tmp |= (4 << 12); + break; + } + dib7000p_write_word(state, 26, tmp); /* timf_a(6xxx) */ + + /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */ + tmp = (0 << 4); + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: + tmp |= 0x6; + break; + case TRANSMISSION_MODE_4K: + tmp |= 0x7; + break; + default: + case TRANSMISSION_MODE_8K: + tmp |= 0x8; + break; + } + dib7000p_write_word(state, 32, tmp); + + /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */ + tmp = (0 << 4); + switch (ch->transmission_mode) { + case TRANSMISSION_MODE_2K: + tmp |= 0x6; + break; + case TRANSMISSION_MODE_4K: + tmp |= 0x7; + break; + default: + case TRANSMISSION_MODE_8K: + tmp |= 0x8; + break; + } + dib7000p_write_word(state, 33, tmp); + + tmp = dib7000p_read_word(state, 509); + if (!((tmp >> 6) & 0x1)) { + /* restart the fec */ + tmp = dib7000p_read_word(state, 771); + dib7000p_write_word(state, 771, tmp | (1 << 1)); + dib7000p_write_word(state, 771, tmp); + msleep(40); + tmp = dib7000p_read_word(state, 509); + } + // we achieved a lock - it's time to update the osc freq + if ((tmp >> 6) & 0x1) { + dib7000p_update_timf(state); + /* P_timf_alpha += 2 */ + tmp = dib7000p_read_word(state, 26); + dib7000p_write_word(state, 26, (tmp & ~(0xf << 12)) | ((((tmp >> 12) & 0xf) + 5) << 12)); + } + + if (state->cfg.spur_protect) + dib7000p_spur_protect(state, ch->frequency / 1000, BANDWIDTH_TO_KHZ(ch->bandwidth_hz)); + + dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz)); + return 0; +} + +static int dib7000p_wakeup(struct dvb_frontend *demod) +{ + struct dib7000p_state *state = demod->demodulator_priv; + dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); + dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON); + if (state->version == SOC7090) + dib7000p_sad_calib(state); + return 0; +} + +static int dib7000p_sleep(struct dvb_frontend *demod) +{ + struct dib7000p_state *state = demod->demodulator_priv; + if (state->version == SOC7090) + return dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); + return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); +} + +static int dib7000p_identify(struct dib7000p_state *st) +{ + u16 value; + dprintk("checking demod on I2C address: %d (%x)", st->i2c_addr, st->i2c_addr); + + if ((value = dib7000p_read_word(st, 768)) != 0x01b3) { + dprintk("wrong Vendor ID (read=0x%x)", value); + return -EREMOTEIO; + } + + if ((value = dib7000p_read_word(st, 769)) != 0x4000) { + dprintk("wrong Device ID (%x)", value); + return -EREMOTEIO; + } + + return 0; +} + +static int dib7000p_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct dib7000p_state *state = fe->demodulator_priv; + u16 tps = dib7000p_read_word(state, 463); + + fep->inversion = INVERSION_AUTO; + + fep->bandwidth_hz = BANDWIDTH_TO_HZ(state->current_bandwidth); + + switch ((tps >> 8) & 0x3) { + case 0: + fep->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + fep->transmission_mode = TRANSMISSION_MODE_8K; + break; + /* case 2: fep->transmission_mode = TRANSMISSION_MODE_4K; break; */ + } + + switch (tps & 0x3) { + case 0: + fep->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + fep->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + fep->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + fep->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((tps >> 14) & 0x3) { + case 0: + fep->modulation = QPSK; + break; + case 1: + fep->modulation = QAM_16; + break; + case 2: + default: + fep->modulation = QAM_64; + break; + } + + /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */ + /* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */ + + fep->hierarchy = HIERARCHY_NONE; + switch ((tps >> 5) & 0x7) { + case 1: + fep->code_rate_HP = FEC_1_2; + break; + case 2: + fep->code_rate_HP = FEC_2_3; + break; + case 3: + fep->code_rate_HP = FEC_3_4; + break; + case 5: + fep->code_rate_HP = FEC_5_6; + break; + case 7: + default: + fep->code_rate_HP = FEC_7_8; + break; + + } + + switch ((tps >> 2) & 0x7) { + case 1: + fep->code_rate_LP = FEC_1_2; + break; + case 2: + fep->code_rate_LP = FEC_2_3; + break; + case 3: + fep->code_rate_LP = FEC_3_4; + break; + case 5: + fep->code_rate_LP = FEC_5_6; + break; + case 7: + default: + fep->code_rate_LP = FEC_7_8; + break; + } + + /* native interleaver: (dib7000p_read_word(state, 464) >> 5) & 0x1 */ + + return 0; +} + +static int dib7000p_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct dib7000p_state *state = fe->demodulator_priv; + int time, ret; + + if (state->version == SOC7090) + dib7090_set_diversity_in(fe, 0); + else + dib7000p_set_output_mode(state, OUTMODE_HIGH_Z); + + /* maybe the parameter has been changed */ + state->sfn_workaround_active = buggy_sfn_workaround; + + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* start up the AGC */ + state->agc_state = 0; + do { + time = dib7000p_agc_startup(fe); + if (time != -1) + msleep(time); + } while (time != -1); + + if (fep->transmission_mode == TRANSMISSION_MODE_AUTO || + fep->guard_interval == GUARD_INTERVAL_AUTO || fep->modulation == QAM_AUTO || fep->code_rate_HP == FEC_AUTO) { + int i = 800, found; + + dib7000p_autosearch_start(fe); + do { + msleep(1); + found = dib7000p_autosearch_is_irq(fe); + } while (found == 0 && i--); + + dprintk("autosearch returns: %d", found); + if (found == 0 || found == 1) + return 0; + + dib7000p_get_frontend(fe); + } + + ret = dib7000p_tune(fe); + + /* make this a config parameter */ + if (state->version == SOC7090) { + dib7090_set_output_mode(fe, state->cfg.output_mode); + if (state->cfg.enMpegOutput == 0) { + dib7090_setDibTxMux(state, MPEG_ON_DIBTX); + dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS); + } + } else + dib7000p_set_output_mode(state, state->cfg.output_mode); + + return ret; +} + +static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t * stat) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 lock = dib7000p_read_word(state, 509); + + *stat = 0; + + if (lock & 0x8000) + *stat |= FE_HAS_SIGNAL; + if (lock & 0x3000) + *stat |= FE_HAS_CARRIER; + if (lock & 0x0100) + *stat |= FE_HAS_VITERBI; + if (lock & 0x0010) + *stat |= FE_HAS_SYNC; + if ((lock & 0x0038) == 0x38) + *stat |= FE_HAS_LOCK; + + return 0; +} + +static int dib7000p_read_ber(struct dvb_frontend *fe, u32 * ber) +{ + struct dib7000p_state *state = fe->demodulator_priv; + *ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501); + return 0; +} + +static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) +{ + struct dib7000p_state *state = fe->demodulator_priv; + *unc = dib7000p_read_word(state, 506); + return 0; +} + +static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 val = dib7000p_read_word(state, 394); + *strength = 65535 - val; + return 0; +} + +static int dib7000p_read_snr(struct dvb_frontend *fe, u16 * snr) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 val; + s32 signal_mant, signal_exp, noise_mant, noise_exp; + u32 result = 0; + + val = dib7000p_read_word(state, 479); + noise_mant = (val >> 4) & 0xff; + noise_exp = ((val & 0xf) << 2); + val = dib7000p_read_word(state, 480); + noise_exp += ((val >> 14) & 0x3); + if ((noise_exp & 0x20) != 0) + noise_exp -= 0x40; + + signal_mant = (val >> 6) & 0xFF; + signal_exp = (val & 0x3F); + if ((signal_exp & 0x20) != 0) + signal_exp -= 0x40; + + if (signal_mant != 0) + result = intlog10(2) * 10 * signal_exp + 10 * intlog10(signal_mant); + else + result = intlog10(2) * 10 * signal_exp - 100; + + if (noise_mant != 0) + result -= intlog10(2) * 10 * noise_exp + 10 * intlog10(noise_mant); + else + result -= intlog10(2) * 10 * noise_exp - 100; + + *snr = result / ((1 << 24) / 10); + return 0; +} + +static int dib7000p_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void dib7000p_release(struct dvb_frontend *demod) +{ + struct dib7000p_state *st = demod->demodulator_priv; + dibx000_exit_i2c_master(&st->i2c_master); + i2c_del_adapter(&st->dib7090_tuner_adap); + kfree(st); +} + +int dib7000pc_detection(struct i2c_adapter *i2c_adap) +{ + u8 *tx, *rx; + struct i2c_msg msg[2] = { + {.addr = 18 >> 1, .flags = 0, .len = 2}, + {.addr = 18 >> 1, .flags = I2C_M_RD, .len = 2}, + }; + int ret = 0; + + tx = kzalloc(2*sizeof(u8), GFP_KERNEL); + if (!tx) + return -ENOMEM; + rx = kzalloc(2*sizeof(u8), GFP_KERNEL); + if (!rx) { + ret = -ENOMEM; + goto rx_memory_error; + } + + msg[0].buf = tx; + msg[1].buf = rx; + + tx[0] = 0x03; + tx[1] = 0x00; + + if (i2c_transfer(i2c_adap, msg, 2) == 2) + if (rx[0] == 0x01 && rx[1] == 0xb3) { + dprintk("-D- DiB7000PC detected"); + return 1; + } + + msg[0].addr = msg[1].addr = 0x40; + + if (i2c_transfer(i2c_adap, msg, 2) == 2) + if (rx[0] == 0x01 && rx[1] == 0xb3) { + dprintk("-D- DiB7000PC detected"); + return 1; + } + + dprintk("-D- DiB7000PC not detected"); + + kfree(rx); +rx_memory_error: + kfree(tx); + return ret; +} +EXPORT_SYMBOL(dib7000pc_detection); + +struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating) +{ + struct dib7000p_state *st = demod->demodulator_priv; + return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); +} +EXPORT_SYMBOL(dib7000p_get_i2c_master); + +int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 val = dib7000p_read_word(state, 235) & 0xffef; + val |= (onoff & 0x1) << 4; + dprintk("PID filter enabled %d", onoff); + return dib7000p_write_word(state, 235, val); +} +EXPORT_SYMBOL(dib7000p_pid_filter_ctrl); + +int dib7000p_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +{ + struct dib7000p_state *state = fe->demodulator_priv; + dprintk("PID filter: index %x, PID %d, OnOff %d", id, pid, onoff); + return dib7000p_write_word(state, 241 + id, onoff ? (1 << 13) | pid : 0); +} +EXPORT_SYMBOL(dib7000p_pid_filter); + +int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]) +{ + struct dib7000p_state *dpst; + int k = 0; + u8 new_addr = 0; + + dpst = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL); + if (!dpst) + return -ENOMEM; + + dpst->i2c_adap = i2c; + mutex_init(&dpst->i2c_buffer_lock); + + for (k = no_of_demods - 1; k >= 0; k--) { + dpst->cfg = cfg[k]; + + /* designated i2c address */ + if (cfg[k].default_i2c_addr != 0) + new_addr = cfg[k].default_i2c_addr + (k << 1); + else + new_addr = (0x40 + k) << 1; + dpst->i2c_addr = new_addr; + dib7000p_write_word(dpst, 1287, 0x0003); /* sram lead in, rdy */ + if (dib7000p_identify(dpst) != 0) { + dpst->i2c_addr = default_addr; + dib7000p_write_word(dpst, 1287, 0x0003); /* sram lead in, rdy */ + if (dib7000p_identify(dpst) != 0) { + dprintk("DiB7000P #%d: not identified\n", k); + kfree(dpst); + return -EIO; + } + } + + /* start diversity to pull_down div_str - just for i2c-enumeration */ + dib7000p_set_output_mode(dpst, OUTMODE_DIVERSITY); + + /* set new i2c address and force divstart */ + dib7000p_write_word(dpst, 1285, (new_addr << 2) | 0x2); + + dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr); + } + + for (k = 0; k < no_of_demods; k++) { + dpst->cfg = cfg[k]; + if (cfg[k].default_i2c_addr != 0) + dpst->i2c_addr = (cfg[k].default_i2c_addr + k) << 1; + else + dpst->i2c_addr = (0x40 + k) << 1; + + // unforce divstr + dib7000p_write_word(dpst, 1285, dpst->i2c_addr << 2); + + /* deactivate div - it was just for i2c-enumeration */ + dib7000p_set_output_mode(dpst, OUTMODE_HIGH_Z); + } + + kfree(dpst); + return 0; +} +EXPORT_SYMBOL(dib7000p_i2c_enumeration); + +static const s32 lut_1000ln_mant[] = { + 6908, 6956, 7003, 7047, 7090, 7131, 7170, 7208, 7244, 7279, 7313, 7346, 7377, 7408, 7438, 7467, 7495, 7523, 7549, 7575, 7600 +}; + +static s32 dib7000p_get_adc_power(struct dvb_frontend *fe) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u32 tmp_val = 0, exp = 0, mant = 0; + s32 pow_i; + u16 buf[2]; + u8 ix = 0; + + buf[0] = dib7000p_read_word(state, 0x184); + buf[1] = dib7000p_read_word(state, 0x185); + pow_i = (buf[0] << 16) | buf[1]; + dprintk("raw pow_i = %d", pow_i); + + tmp_val = pow_i; + while (tmp_val >>= 1) + exp++; + + mant = (pow_i * 1000 / (1 << exp)); + dprintk(" mant = %d exp = %d", mant / 1000, exp); + + ix = (u8) ((mant - 1000) / 100); /* index of the LUT */ + dprintk(" ix = %d", ix); + + pow_i = (lut_1000ln_mant[ix] + 693 * (exp - 20) - 6908); + pow_i = (pow_i << 8) / 1000; + dprintk(" pow_i = %d", pow_i); + + return pow_i; +} + +static int map_addr_to_serpar_number(struct i2c_msg *msg) +{ + if ((msg->buf[0] <= 15)) + msg->buf[0] -= 1; + else if (msg->buf[0] == 17) + msg->buf[0] = 15; + else if (msg->buf[0] == 16) + msg->buf[0] = 17; + else if (msg->buf[0] == 19) + msg->buf[0] = 16; + else if (msg->buf[0] >= 21 && msg->buf[0] <= 25) + msg->buf[0] -= 3; + else if (msg->buf[0] == 28) + msg->buf[0] = 23; + else + return -EINVAL; + return 0; +} + +static int w7090p_tuner_write_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dib7000p_state *state = i2c_get_adapdata(i2c_adap); + u8 n_overflow = 1; + u16 i = 1000; + u16 serpar_num = msg[0].buf[0]; + + while (n_overflow == 1 && i) { + n_overflow = (dib7000p_read_word(state, 1984) >> 1) & 0x1; + i--; + if (i == 0) + dprintk("Tuner ITF: write busy (overflow)"); + } + dib7000p_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f)); + dib7000p_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]); + + return num; +} + +static int w7090p_tuner_read_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dib7000p_state *state = i2c_get_adapdata(i2c_adap); + u8 n_overflow = 1, n_empty = 1; + u16 i = 1000; + u16 serpar_num = msg[0].buf[0]; + u16 read_word; + + while (n_overflow == 1 && i) { + n_overflow = (dib7000p_read_word(state, 1984) >> 1) & 0x1; + i--; + if (i == 0) + dprintk("TunerITF: read busy (overflow)"); + } + dib7000p_write_word(state, 1985, (0 << 6) | (serpar_num & 0x3f)); + + i = 1000; + while (n_empty == 1 && i) { + n_empty = dib7000p_read_word(state, 1984) & 0x1; + i--; + if (i == 0) + dprintk("TunerITF: read busy (empty)"); + } + read_word = dib7000p_read_word(state, 1987); + msg[1].buf[0] = (read_word >> 8) & 0xff; + msg[1].buf[1] = (read_word) & 0xff; + + return num; +} + +static int w7090p_tuner_rw_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + if (map_addr_to_serpar_number(&msg[0]) == 0) { /* else = Tuner regs to ignore : DIG_CFG, CTRL_RF_LT, PLL_CFG, PWM1_REG, ADCCLK, DIG_CFG_3; SLEEP_EN... */ + if (num == 1) { /* write */ + return w7090p_tuner_write_serpar(i2c_adap, msg, 1); + } else { /* read */ + return w7090p_tuner_read_serpar(i2c_adap, msg, 2); + } + } + return num; +} + +static int dib7090p_rw_on_apb(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num, u16 apb_address) +{ + struct dib7000p_state *state = i2c_get_adapdata(i2c_adap); + u16 word; + + if (num == 1) { /* write */ + dib7000p_write_word(state, apb_address, ((msg[0].buf[1] << 8) | (msg[0].buf[2]))); + } else { + word = dib7000p_read_word(state, apb_address); + msg[1].buf[0] = (word >> 8) & 0xff; + msg[1].buf[1] = (word) & 0xff; + } + + return num; +} + +static int dib7090_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dib7000p_state *state = i2c_get_adapdata(i2c_adap); + + u16 apb_address = 0, word; + int i = 0; + switch (msg[0].buf[0]) { + case 0x12: + apb_address = 1920; + break; + case 0x14: + apb_address = 1921; + break; + case 0x24: + apb_address = 1922; + break; + case 0x1a: + apb_address = 1923; + break; + case 0x22: + apb_address = 1924; + break; + case 0x33: + apb_address = 1926; + break; + case 0x34: + apb_address = 1927; + break; + case 0x35: + apb_address = 1928; + break; + case 0x36: + apb_address = 1929; + break; + case 0x37: + apb_address = 1930; + break; + case 0x38: + apb_address = 1931; + break; + case 0x39: + apb_address = 1932; + break; + case 0x2a: + apb_address = 1935; + break; + case 0x2b: + apb_address = 1936; + break; + case 0x2c: + apb_address = 1937; + break; + case 0x2d: + apb_address = 1938; + break; + case 0x2e: + apb_address = 1939; + break; + case 0x2f: + apb_address = 1940; + break; + case 0x30: + apb_address = 1941; + break; + case 0x31: + apb_address = 1942; + break; + case 0x32: + apb_address = 1943; + break; + case 0x3e: + apb_address = 1944; + break; + case 0x3f: + apb_address = 1945; + break; + case 0x40: + apb_address = 1948; + break; + case 0x25: + apb_address = 914; + break; + case 0x26: + apb_address = 915; + break; + case 0x27: + apb_address = 917; + break; + case 0x28: + apb_address = 916; + break; + case 0x1d: + i = ((dib7000p_read_word(state, 72) >> 12) & 0x3); + word = dib7000p_read_word(state, 384 + i); + msg[1].buf[0] = (word >> 8) & 0xff; + msg[1].buf[1] = (word) & 0xff; + return num; + case 0x1f: + if (num == 1) { /* write */ + word = (u16) ((msg[0].buf[1] << 8) | msg[0].buf[2]); + word &= 0x3; + word = (dib7000p_read_word(state, 72) & ~(3 << 12)) | (word << 12); + dib7000p_write_word(state, 72, word); /* Set the proper input */ + return num; + } + } + + if (apb_address != 0) /* R/W acces via APB */ + return dib7090p_rw_on_apb(i2c_adap, msg, num, apb_address); + else /* R/W access via SERPAR */ + return w7090p_tuner_rw_serpar(i2c_adap, msg, num); + + return 0; +} + +static u32 dib7000p_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dib7090_tuner_xfer_algo = { + .master_xfer = dib7090_tuner_xfer, + .functionality = dib7000p_i2c_func, +}; + +struct i2c_adapter *dib7090_get_i2c_tuner(struct dvb_frontend *fe) +{ + struct dib7000p_state *st = fe->demodulator_priv; + return &st->dib7090_tuner_adap; +} +EXPORT_SYMBOL(dib7090_get_i2c_tuner); + +static int dib7090_host_bus_drive(struct dib7000p_state *state, u8 drive) +{ + u16 reg; + + /* drive host bus 2, 3, 4 */ + reg = dib7000p_read_word(state, 1798) & ~((0x7) | (0x7 << 6) | (0x7 << 12)); + reg |= (drive << 12) | (drive << 6) | drive; + dib7000p_write_word(state, 1798, reg); + + /* drive host bus 5,6 */ + reg = dib7000p_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8)); + reg |= (drive << 8) | (drive << 2); + dib7000p_write_word(state, 1799, reg); + + /* drive host bus 7, 8, 9 */ + reg = dib7000p_read_word(state, 1800) & ~((0x7) | (0x7 << 6) | (0x7 << 12)); + reg |= (drive << 12) | (drive << 6) | drive; + dib7000p_write_word(state, 1800, reg); + + /* drive host bus 10, 11 */ + reg = dib7000p_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8)); + reg |= (drive << 8) | (drive << 2); + dib7000p_write_word(state, 1801, reg); + + /* drive host bus 12, 13, 14 */ + reg = dib7000p_read_word(state, 1802) & ~((0x7) | (0x7 << 6) | (0x7 << 12)); + reg |= (drive << 12) | (drive << 6) | drive; + dib7000p_write_word(state, 1802, reg); + + return 0; +} + +static u32 dib7090_calcSyncFreq(u32 P_Kin, u32 P_Kout, u32 insertExtSynchro, u32 syncSize) +{ + u32 quantif = 3; + u32 nom = (insertExtSynchro * P_Kin + syncSize); + u32 denom = P_Kout; + u32 syncFreq = ((nom << quantif) / denom); + + if ((syncFreq & ((1 << quantif) - 1)) != 0) + syncFreq = (syncFreq >> quantif) + 1; + else + syncFreq = (syncFreq >> quantif); + + if (syncFreq != 0) + syncFreq = syncFreq - 1; + + return syncFreq; +} + +static int dib7090_cfg_DibTx(struct dib7000p_state *state, u32 P_Kin, u32 P_Kout, u32 insertExtSynchro, u32 synchroMode, u32 syncWord, u32 syncSize) +{ + dprintk("Configure DibStream Tx"); + + dib7000p_write_word(state, 1615, 1); + dib7000p_write_word(state, 1603, P_Kin); + dib7000p_write_word(state, 1605, P_Kout); + dib7000p_write_word(state, 1606, insertExtSynchro); + dib7000p_write_word(state, 1608, synchroMode); + dib7000p_write_word(state, 1609, (syncWord >> 16) & 0xffff); + dib7000p_write_word(state, 1610, syncWord & 0xffff); + dib7000p_write_word(state, 1612, syncSize); + dib7000p_write_word(state, 1615, 0); + + return 0; +} + +static int dib7090_cfg_DibRx(struct dib7000p_state *state, u32 P_Kin, u32 P_Kout, u32 synchroMode, u32 insertExtSynchro, u32 syncWord, u32 syncSize, + u32 dataOutRate) +{ + u32 syncFreq; + + dprintk("Configure DibStream Rx"); + if ((P_Kin != 0) && (P_Kout != 0)) { + syncFreq = dib7090_calcSyncFreq(P_Kin, P_Kout, insertExtSynchro, syncSize); + dib7000p_write_word(state, 1542, syncFreq); + } + dib7000p_write_word(state, 1554, 1); + dib7000p_write_word(state, 1536, P_Kin); + dib7000p_write_word(state, 1537, P_Kout); + dib7000p_write_word(state, 1539, synchroMode); + dib7000p_write_word(state, 1540, (syncWord >> 16) & 0xffff); + dib7000p_write_word(state, 1541, syncWord & 0xffff); + dib7000p_write_word(state, 1543, syncSize); + dib7000p_write_word(state, 1544, dataOutRate); + dib7000p_write_word(state, 1554, 0); + + return 0; +} + +static void dib7090_enMpegMux(struct dib7000p_state *state, int onoff) +{ + u16 reg_1287 = dib7000p_read_word(state, 1287); + + switch (onoff) { + case 1: + reg_1287 &= ~(1<<7); + break; + case 0: + reg_1287 |= (1<<7); + break; + } + + dib7000p_write_word(state, 1287, reg_1287); +} + +static void dib7090_configMpegMux(struct dib7000p_state *state, + u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2) +{ + dprintk("Enable Mpeg mux"); + + dib7090_enMpegMux(state, 0); + + /* If the input mode is MPEG do not divide the serial clock */ + if ((enSerialMode == 1) && (state->input_mode_mpeg == 1)) + enSerialClkDiv2 = 0; + + dib7000p_write_word(state, 1287, ((pulseWidth & 0x1f) << 2) + | ((enSerialMode & 0x1) << 1) + | (enSerialClkDiv2 & 0x1)); + + dib7090_enMpegMux(state, 1); +} + +static void dib7090_setDibTxMux(struct dib7000p_state *state, int mode) +{ + u16 reg_1288 = dib7000p_read_word(state, 1288) & ~(0x7 << 7); + + switch (mode) { + case MPEG_ON_DIBTX: + dprintk("SET MPEG ON DIBSTREAM TX"); + dib7090_cfg_DibTx(state, 8, 5, 0, 0, 0, 0); + reg_1288 |= (1<<9); + break; + case DIV_ON_DIBTX: + dprintk("SET DIV_OUT ON DIBSTREAM TX"); + dib7090_cfg_DibTx(state, 5, 5, 0, 0, 0, 0); + reg_1288 |= (1<<8); + break; + case ADC_ON_DIBTX: + dprintk("SET ADC_OUT ON DIBSTREAM TX"); + dib7090_cfg_DibTx(state, 20, 5, 10, 0, 0, 0); + reg_1288 |= (1<<7); + break; + default: + break; + } + dib7000p_write_word(state, 1288, reg_1288); +} + +static void dib7090_setHostBusMux(struct dib7000p_state *state, int mode) +{ + u16 reg_1288 = dib7000p_read_word(state, 1288) & ~(0x7 << 4); + + switch (mode) { + case DEMOUT_ON_HOSTBUS: + dprintk("SET DEM OUT OLD INTERF ON HOST BUS"); + dib7090_enMpegMux(state, 0); + reg_1288 |= (1<<6); + break; + case DIBTX_ON_HOSTBUS: + dprintk("SET DIBSTREAM TX ON HOST BUS"); + dib7090_enMpegMux(state, 0); + reg_1288 |= (1<<5); + break; + case MPEG_ON_HOSTBUS: + dprintk("SET MPEG MUX ON HOST BUS"); + reg_1288 |= (1<<4); + break; + default: + break; + } + dib7000p_write_word(state, 1288, reg_1288); +} + +int dib7090_set_diversity_in(struct dvb_frontend *fe, int onoff) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 reg_1287; + + switch (onoff) { + case 0: /* only use the internal way - not the diversity input */ + dprintk("%s mode OFF : by default Enable Mpeg INPUT", __func__); + dib7090_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0); + + /* Do not divide the serial clock of MPEG MUX */ + /* in SERIAL MODE in case input mode MPEG is used */ + reg_1287 = dib7000p_read_word(state, 1287); + /* enSerialClkDiv2 == 1 ? */ + if ((reg_1287 & 0x1) == 1) { + /* force enSerialClkDiv2 = 0 */ + reg_1287 &= ~0x1; + dib7000p_write_word(state, 1287, reg_1287); + } + state->input_mode_mpeg = 1; + break; + case 1: /* both ways */ + case 2: /* only the diversity input */ + dprintk("%s ON : Enable diversity INPUT", __func__); + dib7090_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0); + state->input_mode_mpeg = 0; + break; + } + + dib7000p_set_diversity_in(&state->demod, onoff); + return 0; +} + +static int dib7090_set_output_mode(struct dvb_frontend *fe, int mode) +{ + struct dib7000p_state *state = fe->demodulator_priv; + + u16 outreg, smo_mode, fifo_threshold; + u8 prefer_mpeg_mux_use = 1; + int ret = 0; + + dib7090_host_bus_drive(state, 1); + + fifo_threshold = 1792; + smo_mode = (dib7000p_read_word(state, 235) & 0x0050) | (1 << 1); + outreg = dib7000p_read_word(state, 1286) & ~((1 << 10) | (0x7 << 6) | (1 << 1)); + + switch (mode) { + case OUTMODE_HIGH_Z: + outreg = 0; + break; + + case OUTMODE_MPEG2_SERIAL: + if (prefer_mpeg_mux_use) { + dprintk("setting output mode TS_SERIAL using Mpeg Mux"); + dib7090_configMpegMux(state, 3, 1, 1); + dib7090_setHostBusMux(state, MPEG_ON_HOSTBUS); + } else {/* Use Smooth block */ + dprintk("setting output mode TS_SERIAL using Smooth bloc"); + dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (2<<6) | (0 << 1); + } + break; + + case OUTMODE_MPEG2_PAR_GATED_CLK: + if (prefer_mpeg_mux_use) { + dprintk("setting output mode TS_PARALLEL_GATED using Mpeg Mux"); + dib7090_configMpegMux(state, 2, 0, 0); + dib7090_setHostBusMux(state, MPEG_ON_HOSTBUS); + } else { /* Use Smooth block */ + dprintk("setting output mode TS_PARALLEL_GATED using Smooth block"); + dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (0<<6); + } + break; + + case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */ + dprintk("setting output mode TS_PARALLEL_CONT using Smooth block"); + dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (1<<6); + break; + + case OUTMODE_MPEG2_FIFO: /* Using Smooth block because not supported by new Mpeg Mux bloc */ + dprintk("setting output mode TS_FIFO using Smooth block"); + dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (5<<6); + smo_mode |= (3 << 1); + fifo_threshold = 512; + break; + + case OUTMODE_DIVERSITY: + dprintk("setting output mode MODE_DIVERSITY"); + dib7090_setDibTxMux(state, DIV_ON_DIBTX); + dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS); + break; + + case OUTMODE_ANALOG_ADC: + dprintk("setting output mode MODE_ANALOG_ADC"); + dib7090_setDibTxMux(state, ADC_ON_DIBTX); + dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS); + break; + } + if (mode != OUTMODE_HIGH_Z) + outreg |= (1 << 10); + + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + + ret |= dib7000p_write_word(state, 235, smo_mode); + ret |= dib7000p_write_word(state, 236, fifo_threshold); /* synchronous fread */ + ret |= dib7000p_write_word(state, 1286, outreg); + + return ret; +} + +int dib7090_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 en_cur_state; + + dprintk("sleep dib7090: %d", onoff); + + en_cur_state = dib7000p_read_word(state, 1922); + + if (en_cur_state > 0xff) + state->tuner_enable = en_cur_state; + + if (onoff) + en_cur_state &= 0x00ff; + else { + if (state->tuner_enable != 0) + en_cur_state = state->tuner_enable; + } + + dib7000p_write_word(state, 1922, en_cur_state); + + return 0; +} +EXPORT_SYMBOL(dib7090_tuner_sleep); + +int dib7090_get_adc_power(struct dvb_frontend *fe) +{ + return dib7000p_get_adc_power(fe); +} +EXPORT_SYMBOL(dib7090_get_adc_power); + +int dib7090_slave_reset(struct dvb_frontend *fe) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 reg; + + reg = dib7000p_read_word(state, 1794); + dib7000p_write_word(state, 1794, reg | (4 << 12)); + + dib7000p_write_word(state, 1032, 0xffff); + return 0; +} +EXPORT_SYMBOL(dib7090_slave_reset); + +static struct dvb_frontend_ops dib7000p_ops; +struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg) +{ + struct dvb_frontend *demod; + struct dib7000p_state *st; + st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL); + if (st == NULL) + return NULL; + + memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config)); + st->i2c_adap = i2c_adap; + st->i2c_addr = i2c_addr; + st->gpio_val = cfg->gpio_val; + st->gpio_dir = cfg->gpio_dir; + + /* Ensure the output mode remains at the previous default if it's + * not specifically set by the caller. + */ + if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) + st->cfg.output_mode = OUTMODE_MPEG2_FIFO; + + demod = &st->demod; + demod->demodulator_priv = st; + memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops)); + mutex_init(&st->i2c_buffer_lock); + + dib7000p_write_word(st, 1287, 0x0003); /* sram lead in, rdy */ + + if (dib7000p_identify(st) != 0) + goto error; + + st->version = dib7000p_read_word(st, 897); + + /* FIXME: make sure the dev.parent field is initialized, or else + request_firmware() will hit an OOPS (this should be moved somewhere + more common) */ + st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent; + + dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); + + /* init 7090 tuner adapter */ + strncpy(st->dib7090_tuner_adap.name, "DiB7090 tuner interface", sizeof(st->dib7090_tuner_adap.name)); + st->dib7090_tuner_adap.algo = &dib7090_tuner_xfer_algo; + st->dib7090_tuner_adap.algo_data = NULL; + st->dib7090_tuner_adap.dev.parent = st->i2c_adap->dev.parent; + i2c_set_adapdata(&st->dib7090_tuner_adap, st); + i2c_add_adapter(&st->dib7090_tuner_adap); + + dib7000p_demod_reset(st); + + if (st->version == SOC7090) { + dib7090_set_output_mode(demod, st->cfg.output_mode); + dib7090_set_diversity_in(demod, 0); + } + + return demod; + +error: + kfree(st); + return NULL; +} +EXPORT_SYMBOL(dib7000p_attach); + +static struct dvb_frontend_ops dib7000p_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "DiBcom 7000PC", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib7000p_release, + + .init = dib7000p_wakeup, + .sleep = dib7000p_sleep, + + .set_frontend = dib7000p_set_frontend, + .get_tune_settings = dib7000p_fe_get_tune_settings, + .get_frontend = dib7000p_get_frontend, + + .read_status = dib7000p_read_status, + .read_ber = dib7000p_read_ber, + .read_signal_strength = dib7000p_read_signal_strength, + .read_snr = dib7000p_read_snr, + .read_ucblocks = dib7000p_read_unc_blocks, +}; + +MODULE_AUTHOR("Olivier Grenie "); +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dib7000p.h b/drivers/media/dvb-frontends/dib7000p.h new file mode 100644 index 00000000..d08cdff5 --- /dev/null +++ b/drivers/media/dvb-frontends/dib7000p.h @@ -0,0 +1,166 @@ +#ifndef DIB7000P_H +#define DIB7000P_H + +#include + +#include "dibx000_common.h" + +struct dib7000p_config { + u8 output_mpeg2_in_188_bytes; + u8 hostbus_diversity; + u8 tuner_is_baseband; + int (*update_lna) (struct dvb_frontend *, u16 agc_global); + + u8 agc_config_count; + struct dibx000_agc_config *agc; + struct dibx000_bandwidth_config *bw; + +#define DIB7000P_GPIO_DEFAULT_DIRECTIONS 0xffff + u16 gpio_dir; +#define DIB7000P_GPIO_DEFAULT_VALUES 0x0000 + u16 gpio_val; +#define DIB7000P_GPIO_PWM_POS0(v) ((v & 0xf) << 12) +#define DIB7000P_GPIO_PWM_POS1(v) ((v & 0xf) << 8 ) +#define DIB7000P_GPIO_PWM_POS2(v) ((v & 0xf) << 4 ) +#define DIB7000P_GPIO_PWM_POS3(v) (v & 0xf) +#define DIB7000P_GPIO_DEFAULT_PWM_POS 0xffff + u16 gpio_pwm_pos; + + u16 pwm_freq_div; + + u8 quartz_direct; + + u8 spur_protect; + + int (*agc_control) (struct dvb_frontend *, u8 before); + + u8 output_mode; + u8 disable_sample_and_hold:1; + + u8 enable_current_mirror:1; + u16 diversity_delay; + + u8 default_i2c_addr; + u8 enMpegOutput:1; +}; + +#define DEFAULT_DIB7000P_I2C_ADDRESS 18 + +#if IS_ENABLED(CONFIG_DVB_DIB7000P) +extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +extern struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); +extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]); +extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); +extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value); +extern int dib7000pc_detection(struct i2c_adapter *i2c_adap); +extern int dib7000p_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff); +extern int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff); +extern int dib7000p_update_pll(struct dvb_frontend *fe, struct dibx000_bandwidth_config *bw); +extern u32 dib7000p_ctrl_timf(struct dvb_frontend *fe, u8 op, u32 timf); +extern int dib7090_tuner_sleep(struct dvb_frontend *fe, int onoff); +extern int dib7090_get_adc_power(struct dvb_frontend *fe); +extern struct i2c_adapter *dib7090_get_i2c_tuner(struct dvb_frontend *fe); +extern int dib7090_slave_reset(struct dvb_frontend *fe); +extern int dib7000p_get_agc_values(struct dvb_frontend *fe, + u16 *agc_global, u16 *agc1, u16 *agc2, u16 *wbd); +extern int dib7000p_set_agc1_min(struct dvb_frontend *fe, u16 v); +#else +static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface i, int x) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000p_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000p_set_wbd_ref(struct dvb_frontend *fe, u16 value) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000pc_detection(struct i2c_adapter *i2c_adap) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000p_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, uint8_t onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000p_update_pll(struct dvb_frontend *fe, struct dibx000_bandwidth_config *bw) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline u32 dib7000p_ctrl_timf(struct dvb_frontend *fe, u8 op, u32 timf) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline int dib7090_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7090_get_adc_power(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline struct i2c_adapter *dib7090_get_i2c_tuner(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline int dib7090_slave_reset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000p_get_agc_values(struct dvb_frontend *fe, + u16 *agc_global, u16 *agc1, u16 *agc2, u16 *wbd) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib7000p_set_agc1_min(struct dvb_frontend *fe, u16 v) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c new file mode 100644 index 00000000..362de38a --- /dev/null +++ b/drivers/media/dvb-frontends/dib8000.c @@ -0,0 +1,3992 @@ +/* + * Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T). + * + * Copyright (C) 2009 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#include +#include +#include +#include + +#include "dvb_math.h" + +#include "dvb_frontend.h" + +#include "dib8000.h" + +#define LAYER_ALL -1 +#define LAYER_A 1 +#define LAYER_B 2 +#define LAYER_C 3 + +#define MAX_NUMBER_OF_FRONTENDS 6 +/* #define DIB8000_AGC_FREEZE */ + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0) + +struct i2c_device { + struct i2c_adapter *adap; + u8 addr; + u8 *i2c_write_buffer; + u8 *i2c_read_buffer; + struct mutex *i2c_buffer_lock; +}; + +enum param_loop_step { + LOOP_TUNE_1, + LOOP_TUNE_2 +}; + +enum dib8000_autosearch_step { + AS_START = 0, + AS_SEARCHING_FFT, + AS_SEARCHING_GUARD, + AS_DONE = 100, +}; + +enum timeout_mode { + SYMBOL_DEPENDENT_OFF = 0, + SYMBOL_DEPENDENT_ON, +}; + +struct dib8000_state { + struct dib8000_config cfg; + + struct i2c_device i2c; + + struct dibx000_i2c_master i2c_master; + + u16 wbd_ref; + + u8 current_band; + u32 current_bandwidth; + struct dibx000_agc_config *current_agc; + u32 timf; + u32 timf_default; + + u8 div_force_off:1; + u8 div_state:1; + u16 div_sync_wait; + + u8 agc_state; + u8 differential_constellation; + u8 diversity_onoff; + + s16 ber_monitored_layer; + u16 gpio_dir; + u16 gpio_val; + + u16 revision; + u8 isdbt_cfg_loaded; + enum frontend_tune_state tune_state; + s32 status; + + struct dvb_frontend *fe[MAX_NUMBER_OF_FRONTENDS]; + + /* for the I2C transfer */ + struct i2c_msg msg[2]; + u8 i2c_write_buffer[4]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; + u8 input_mode_mpeg; + + u16 tuner_enable; + struct i2c_adapter dib8096p_tuner_adap; + u16 current_demod_bw; + + u16 seg_mask; + u16 seg_diff_mask; + u16 mode; + u8 layer_b_nb_seg; + u8 layer_c_nb_seg; + + u8 channel_parameters_set; + u16 autosearch_state; + u16 found_nfft; + u16 found_guard; + u8 subchannel; + u8 symbol_duration; + u32 timeout; + u8 longest_intlv_layer; + u16 output_mode; + +#ifdef DIB8000_AGC_FREEZE + u16 agc1_max; + u16 agc1_min; + u16 agc2_max; + u16 agc2_min; +#endif +}; + +enum dib8000_power_mode { + DIB8000_POWER_ALL = 0, + DIB8000_POWER_INTERFACE_ONLY, +}; + +static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg) +{ + u16 ret; + struct i2c_msg msg[2] = { + {.addr = i2c->addr >> 1, .flags = 0, .len = 2}, + {.addr = i2c->addr >> 1, .flags = I2C_M_RD, .len = 2}, + }; + + if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + msg[0].buf = i2c->i2c_write_buffer; + msg[0].buf[0] = reg >> 8; + msg[0].buf[1] = reg & 0xff; + msg[1].buf = i2c->i2c_read_buffer; + + if (i2c_transfer(i2c->adap, msg, 2) != 2) + dprintk("i2c read error on %d", reg); + + ret = (msg[1].buf[0] << 8) | msg[1].buf[1]; + mutex_unlock(i2c->i2c_buffer_lock); + return ret; +} + +static u16 __dib8000_read_word(struct dib8000_state *state, u16 reg) +{ + u16 ret; + + state->i2c_write_buffer[0] = reg >> 8; + state->i2c_write_buffer[1] = reg & 0xff; + + memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c.addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 2; + state->msg[1].addr = state->i2c.addr >> 1; + state->msg[1].flags = I2C_M_RD; + state->msg[1].buf = state->i2c_read_buffer; + state->msg[1].len = 2; + + if (i2c_transfer(state->i2c.adap, state->msg, 2) != 2) + dprintk("i2c read error on %d", reg); + + ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1]; + + return ret; +} + +static u16 dib8000_read_word(struct dib8000_state *state, u16 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + ret = __dib8000_read_word(state, reg); + + mutex_unlock(&state->i2c_buffer_lock); + + return ret; +} + +static u32 dib8000_read32(struct dib8000_state *state, u16 reg) +{ + u16 rw[2]; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + rw[0] = __dib8000_read_word(state, reg + 0); + rw[1] = __dib8000_read_word(state, reg + 1); + + mutex_unlock(&state->i2c_buffer_lock); + + return ((rw[0] << 16) | (rw[1])); +} + +static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val) +{ + struct i2c_msg msg = {.addr = i2c->addr >> 1, .flags = 0, .len = 4}; + int ret = 0; + + if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + + msg.buf = i2c->i2c_write_buffer; + msg.buf[0] = (reg >> 8) & 0xff; + msg.buf[1] = reg & 0xff; + msg.buf[2] = (val >> 8) & 0xff; + msg.buf[3] = val & 0xff; + + ret = i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0; + mutex_unlock(i2c->i2c_buffer_lock); + + return ret; +} + +static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + + state->i2c_write_buffer[0] = (reg >> 8) & 0xff; + state->i2c_write_buffer[1] = reg & 0xff; + state->i2c_write_buffer[2] = (val >> 8) & 0xff; + state->i2c_write_buffer[3] = val & 0xff; + + memset(&state->msg[0], 0, sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c.addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 4; + + ret = (i2c_transfer(state->i2c.adap, state->msg, 1) != 1 ? + -EREMOTEIO : 0); + mutex_unlock(&state->i2c_buffer_lock); + + return ret; +} + +static const s16 coeff_2k_sb_1seg_dqpsk[8] = { + (769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c, + (920 << 5) | 0x09 +}; + +static const s16 coeff_2k_sb_1seg[8] = { + (692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f +}; + +static const s16 coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = { + (832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11, + (-931 << 5) | 0x0f +}; + +static const s16 coeff_2k_sb_3seg_0dqpsk[8] = { + (622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e, + (982 << 5) | 0x0c +}; + +static const s16 coeff_2k_sb_3seg_1dqpsk[8] = { + (699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12, + (-720 << 5) | 0x0d +}; + +static const s16 coeff_2k_sb_3seg[8] = { + (664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e, + (-610 << 5) | 0x0a +}; + +static const s16 coeff_4k_sb_1seg_dqpsk[8] = { + (-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f, + (-922 << 5) | 0x0d +}; + +static const s16 coeff_4k_sb_1seg[8] = { + (638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d, + (-655 << 5) | 0x0a +}; + +static const s16 coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = { + (-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14, + (-958 << 5) | 0x13 +}; + +static const s16 coeff_4k_sb_3seg_0dqpsk[8] = { + (-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12, + (-568 << 5) | 0x0f +}; + +static const s16 coeff_4k_sb_3seg_1dqpsk[8] = { + (-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14, + (-848 << 5) | 0x13 +}; + +static const s16 coeff_4k_sb_3seg[8] = { + (612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12, + (-869 << 5) | 0x13 +}; + +static const s16 coeff_8k_sb_1seg_dqpsk[8] = { + (-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13, + (-598 << 5) | 0x10 +}; + +static const s16 coeff_8k_sb_1seg[8] = { + (673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f, + (585 << 5) | 0x0f +}; + +static const s16 coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = { + (863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18, + (0 << 5) | 0x14 +}; + +static const s16 coeff_8k_sb_3seg_0dqpsk[8] = { + (-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15, + (-877 << 5) | 0x15 +}; + +static const s16 coeff_8k_sb_3seg_1dqpsk[8] = { + (-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18, + (-921 << 5) | 0x14 +}; + +static const s16 coeff_8k_sb_3seg[8] = { + (514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15, + (690 << 5) | 0x14 +}; + +static const s16 ana_fe_coeff_3seg[24] = { + 81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017 +}; + +static const s16 ana_fe_coeff_1seg[24] = { + 249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003 +}; + +static const s16 ana_fe_coeff_13seg[24] = { + 396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1 +}; + +static u16 fft_to_mode(struct dib8000_state *state) +{ + u16 mode; + switch (state->fe[0]->dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_2K: + mode = 1; + break; + case TRANSMISSION_MODE_4K: + mode = 2; + break; + default: + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_8K: + mode = 3; + break; + } + return mode; +} + +static void dib8000_set_acquisition_mode(struct dib8000_state *state) +{ + u16 nud = dib8000_read_word(state, 298); + nud |= (1 << 3) | (1 << 0); + dprintk("acquisition mode activated"); + dib8000_write_word(state, 298, nud); +} +static int dib8000_set_output_mode(struct dvb_frontend *fe, int mode) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 outreg, fifo_threshold, smo_mode, sram = 0x0205; /* by default SDRAM deintlv is enabled */ + + state->output_mode = mode; + outreg = 0; + fifo_threshold = 1792; + smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1); + + dprintk("-I- Setting output mode for demod %p to %d", + &state->fe[0], mode); + + switch (mode) { + case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock + outreg = (1 << 10); /* 0x0400 */ + break; + case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock + outreg = (1 << 10) | (1 << 6); /* 0x0440 */ + break; + case OUTMODE_MPEG2_SERIAL: // STBs with serial input + outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */ + break; + case OUTMODE_DIVERSITY: + if (state->cfg.hostbus_diversity) { + outreg = (1 << 10) | (4 << 6); /* 0x0500 */ + sram &= 0xfdff; + } else + sram |= 0x0c00; + break; + case OUTMODE_MPEG2_FIFO: // e.g. USB feeding + smo_mode |= (3 << 1); + fifo_threshold = 512; + outreg = (1 << 10) | (5 << 6); + break; + case OUTMODE_HIGH_Z: // disable + outreg = 0; + break; + + case OUTMODE_ANALOG_ADC: + outreg = (1 << 10) | (3 << 6); + dib8000_set_acquisition_mode(state); + break; + + default: + dprintk("Unhandled output_mode passed to be set for demod %p", + &state->fe[0]); + return -EINVAL; + } + + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + + dib8000_write_word(state, 299, smo_mode); + dib8000_write_word(state, 300, fifo_threshold); /* synchronous fread */ + dib8000_write_word(state, 1286, outreg); + dib8000_write_word(state, 1291, sram); + + return 0; +} + +static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 tmp, sync_wait = dib8000_read_word(state, 273) & 0xfff0; + + dprintk("set diversity input to %i", onoff); + if (!state->differential_constellation) { + dib8000_write_word(state, 272, 1 << 9); //dvsy_off_lmod4 = 1 + dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2); // sync_enable = 1; comb_mode = 2 + } else { + dib8000_write_word(state, 272, 0); //dvsy_off_lmod4 = 0 + dib8000_write_word(state, 273, sync_wait); // sync_enable = 0; comb_mode = 0 + } + state->diversity_onoff = onoff; + + switch (onoff) { + case 0: /* only use the internal way - not the diversity input */ + dib8000_write_word(state, 270, 1); + dib8000_write_word(state, 271, 0); + break; + case 1: /* both ways */ + dib8000_write_word(state, 270, 6); + dib8000_write_word(state, 271, 6); + break; + case 2: /* only the diversity input */ + dib8000_write_word(state, 270, 0); + dib8000_write_word(state, 271, 1); + break; + } + + if (state->revision == 0x8002) { + tmp = dib8000_read_word(state, 903); + dib8000_write_word(state, 903, tmp & ~(1 << 3)); + msleep(30); + dib8000_write_word(state, 903, tmp | (1 << 3)); + } + return 0; +} + +static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode) +{ + /* by default everything is going to be powered off */ + u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff, + reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, + reg_1280; + + if (state->revision != 0x8090) + reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00; + else + reg_1280 = (dib8000_read_word(state, 1280) & 0x707f) | 0x8f80; + + /* now, depending on the requested mode, we power on */ + switch (mode) { + /* power up everything in the demod */ + case DIB8000_POWER_ALL: + reg_774 = 0x0000; + reg_775 = 0x0000; + reg_776 = 0x0000; + reg_900 &= 0xfffc; + if (state->revision != 0x8090) + reg_1280 &= 0x00ff; + else + reg_1280 &= 0x707f; + break; + case DIB8000_POWER_INTERFACE_ONLY: + if (state->revision != 0x8090) + reg_1280 &= 0x00ff; + else + reg_1280 &= 0xfa7b; + break; + } + + dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280); + dib8000_write_word(state, 774, reg_774); + dib8000_write_word(state, 775, reg_775); + dib8000_write_word(state, 776, reg_776); + dib8000_write_word(state, 900, reg_900); + dib8000_write_word(state, 1280, reg_1280); +} + +static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no) +{ + int ret = 0; + u16 reg, reg_907 = dib8000_read_word(state, 907); + u16 reg_908 = dib8000_read_word(state, 908); + + switch (no) { + case DIBX000_SLOW_ADC_ON: + if (state->revision != 0x8090) { + reg_908 |= (1 << 1) | (1 << 0); + ret |= dib8000_write_word(state, 908, reg_908); + reg_908 &= ~(1 << 1); + } else { + reg = dib8000_read_word(state, 1925); + /* en_slowAdc = 1 & reset_sladc = 1 */ + dib8000_write_word(state, 1925, reg | + (1<<4) | (1<<2)); + + /* read acces to make it works... strange ... */ + reg = dib8000_read_word(state, 1925); + msleep(20); + /* en_slowAdc = 1 & reset_sladc = 0 */ + dib8000_write_word(state, 1925, reg & ~(1<<4)); + + reg = dib8000_read_word(state, 921) & ~((0x3 << 14) + | (0x3 << 12)); + /* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ; + (Vin2 = Vcm) */ + dib8000_write_word(state, 921, reg | (1 << 14) + | (3 << 12)); + } + break; + + case DIBX000_SLOW_ADC_OFF: + if (state->revision == 0x8090) { + reg = dib8000_read_word(state, 1925); + /* reset_sladc = 1 en_slowAdc = 0 */ + dib8000_write_word(state, 1925, + (reg & ~(1<<2)) | (1<<4)); + } + reg_908 |= (1 << 1) | (1 << 0); + break; + + case DIBX000_ADC_ON: + reg_907 &= 0x0fff; + reg_908 &= 0x0003; + break; + + case DIBX000_ADC_OFF: // leave the VBG voltage on + reg_907 |= (1 << 14) | (1 << 13) | (1 << 12); + reg_908 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2); + break; + + case DIBX000_VBG_ENABLE: + reg_907 &= ~(1 << 15); + break; + + case DIBX000_VBG_DISABLE: + reg_907 |= (1 << 15); + break; + + default: + break; + } + + ret |= dib8000_write_word(state, 907, reg_907); + ret |= dib8000_write_word(state, 908, reg_908); + + return ret; +} + +static int dib8000_set_bandwidth(struct dvb_frontend *fe, u32 bw) +{ + struct dib8000_state *state = fe->demodulator_priv; + u32 timf; + + if (bw == 0) + bw = 6000; + + if (state->timf == 0) { + dprintk("using default timf"); + timf = state->timf_default; + } else { + dprintk("using updated timf"); + timf = state->timf; + } + + dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff)); + dib8000_write_word(state, 30, (u16) ((timf) & 0xffff)); + + return 0; +} + +static int dib8000_sad_calib(struct dib8000_state *state) +{ + u8 sad_sel = 3; + + if (state->revision == 0x8090) { + dib8000_write_word(state, 922, (sad_sel << 2)); + dib8000_write_word(state, 923, 2048); + + dib8000_write_word(state, 922, (sad_sel << 2) | 0x1); + dib8000_write_word(state, 922, (sad_sel << 2)); + } else { + /* internal */ + dib8000_write_word(state, 923, (0 << 1) | (0 << 0)); + dib8000_write_word(state, 924, 776); + + /* do the calibration */ + dib8000_write_word(state, 923, (1 << 0)); + dib8000_write_word(state, 923, (0 << 0)); + } + + msleep(1); + return 0; +} + +int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value) +{ + struct dib8000_state *state = fe->demodulator_priv; + if (value > 4095) + value = 4095; + state->wbd_ref = value; + return dib8000_write_word(state, 106, value); +} +EXPORT_SYMBOL(dib8000_set_wbd_ref); + +static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw) +{ + dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25); + if (state->revision != 0x8090) { + dib8000_write_word(state, 23, + (u16) (((bw->internal * 1000) >> 16) & 0xffff)); + dib8000_write_word(state, 24, + (u16) ((bw->internal * 1000) & 0xffff)); + } else { + dib8000_write_word(state, 23, (u16) (((bw->internal / 2 * 1000) >> 16) & 0xffff)); + dib8000_write_word(state, 24, + (u16) ((bw->internal / 2 * 1000) & 0xffff)); + } + dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff)); + dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff)); + dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003)); + + if (state->revision != 0x8090) + dib8000_write_word(state, 922, bw->sad_cfg); +} + +static void dib8000_reset_pll(struct dib8000_state *state) +{ + const struct dibx000_bandwidth_config *pll = state->cfg.pll; + u16 clk_cfg1, reg; + + if (state->revision != 0x8090) { + dib8000_write_word(state, 901, + (pll->pll_prediv << 8) | (pll->pll_ratio << 0)); + + clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) | + (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | + (1 << 3) | (pll->pll_range << 1) | + (pll->pll_reset << 0); + + dib8000_write_word(state, 902, clk_cfg1); + clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3); + dib8000_write_word(state, 902, clk_cfg1); + + dprintk("clk_cfg1: 0x%04x", clk_cfg1); + + /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */ + if (state->cfg.pll->ADClkSrc == 0) + dib8000_write_word(state, 904, + (0 << 15) | (0 << 12) | (0 << 10) | + (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + else if (state->cfg.refclksel != 0) + dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | + ((state->cfg.refclksel & 0x3) << 10) | + (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + else + dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | + (3 << 10) | (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + } else { + dib8000_write_word(state, 1856, (!pll->pll_reset<<13) | + (pll->pll_range<<12) | (pll->pll_ratio<<6) | + (pll->pll_prediv)); + + reg = dib8000_read_word(state, 1857); + dib8000_write_word(state, 1857, reg|(!pll->pll_bypass<<15)); + + reg = dib8000_read_word(state, 1858); /* Force clk out pll /2 */ + dib8000_write_word(state, 1858, reg | 1); + + dib8000_write_word(state, 904, (pll->modulo << 8)); + } + + dib8000_reset_pll_common(state, pll); +} + +int dib8000_update_pll(struct dvb_frontend *fe, + struct dibx000_bandwidth_config *pll, u32 bw, u8 ratio) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 reg_1857, reg_1856 = dib8000_read_word(state, 1856); + u8 loopdiv, prediv, oldprediv = state->cfg.pll->pll_prediv ; + u32 internal, xtal; + + /* get back old values */ + prediv = reg_1856 & 0x3f; + loopdiv = (reg_1856 >> 6) & 0x3f; + + if ((pll == NULL) || (pll->pll_prediv == prediv && + pll->pll_ratio == loopdiv)) + return -EINVAL; + + dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)", prediv, pll->pll_prediv, loopdiv, pll->pll_ratio); + if (state->revision == 0x8090) { + reg_1856 &= 0xf000; + reg_1857 = dib8000_read_word(state, 1857); + /* disable PLL */ + dib8000_write_word(state, 1857, reg_1857 & ~(1 << 15)); + + dib8000_write_word(state, 1856, reg_1856 | + ((pll->pll_ratio & 0x3f) << 6) | + (pll->pll_prediv & 0x3f)); + + /* write new system clk into P_sec_len */ + internal = dib8000_read32(state, 23) / 1000; + dprintk("Old Internal = %d", internal); + xtal = 2 * (internal / loopdiv) * prediv; + internal = 1000 * (xtal/pll->pll_prediv) * pll->pll_ratio; + dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d", xtal, internal/1000, internal/2000, internal/8000); + dprintk("New Internal = %d", internal); + + dib8000_write_word(state, 23, + (u16) (((internal / 2) >> 16) & 0xffff)); + dib8000_write_word(state, 24, (u16) ((internal / 2) & 0xffff)); + /* enable PLL */ + dib8000_write_word(state, 1857, reg_1857 | (1 << 15)); + + while (((dib8000_read_word(state, 1856)>>15)&0x1) != 1) + dprintk("Waiting for PLL to lock"); + + /* verify */ + reg_1856 = dib8000_read_word(state, 1856); + dprintk("PLL Updated with prediv = %d and loopdiv = %d", + reg_1856&0x3f, (reg_1856>>6)&0x3f); + } else { + if (bw != state->current_demod_bw) { + /** Bandwidth change => force PLL update **/ + dprintk("PLL: Bandwidth Change %d MHz -> %d MHz (prediv: %d->%d)", state->current_demod_bw / 1000, bw / 1000, oldprediv, state->cfg.pll->pll_prediv); + + if (state->cfg.pll->pll_prediv != oldprediv) { + /** Full PLL change only if prediv is changed **/ + + /** full update => bypass and reconfigure **/ + dprintk("PLL: New Setting for %d MHz Bandwidth (prediv: %d, ratio: %d)", bw/1000, state->cfg.pll->pll_prediv, state->cfg.pll->pll_ratio); + dib8000_write_word(state, 902, dib8000_read_word(state, 902) | (1<<3)); /* bypass PLL */ + dib8000_reset_pll(state); + dib8000_write_word(state, 898, 0x0004); /* sad */ + } else + ratio = state->cfg.pll->pll_ratio; + + state->current_demod_bw = bw; + } + + if (ratio != 0) { + /** ratio update => only change ratio **/ + dprintk("PLL: Update ratio (prediv: %d, ratio: %d)", state->cfg.pll->pll_prediv, ratio); + dib8000_write_word(state, 901, (state->cfg.pll->pll_prediv << 8) | (ratio << 0)); /* only the PLL ratio is updated. */ + } +} + + return 0; +} +EXPORT_SYMBOL(dib8000_update_pll); + + +static int dib8000_reset_gpio(struct dib8000_state *st) +{ + /* reset the GPIOs */ + dib8000_write_word(st, 1029, st->cfg.gpio_dir); + dib8000_write_word(st, 1030, st->cfg.gpio_val); + + /* TODO 782 is P_gpio_od */ + + dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos); + + dib8000_write_word(st, 1037, st->cfg.pwm_freq_div); + return 0; +} + +static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val) +{ + st->cfg.gpio_dir = dib8000_read_word(st, 1029); + st->cfg.gpio_dir &= ~(1 << num); /* reset the direction bit */ + st->cfg.gpio_dir |= (dir & 0x1) << num; /* set the new direction */ + dib8000_write_word(st, 1029, st->cfg.gpio_dir); + + st->cfg.gpio_val = dib8000_read_word(st, 1030); + st->cfg.gpio_val &= ~(1 << num); /* reset the direction bit */ + st->cfg.gpio_val |= (val & 0x01) << num; /* set the new value */ + dib8000_write_word(st, 1030, st->cfg.gpio_val); + + dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val); + + return 0; +} + +int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + struct dib8000_state *state = fe->demodulator_priv; + return dib8000_cfg_gpio(state, num, dir, val); +} + +EXPORT_SYMBOL(dib8000_set_gpio); +static const u16 dib8000_defaults[] = { + /* auto search configuration - lock0 by default waiting + * for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */ + 3, 7, + 0x0004, + 0x0400, + 0x0814, + + 12, 11, + 0x001b, + 0x7740, + 0x005b, + 0x8d80, + 0x01c9, + 0xc380, + 0x0000, + 0x0080, + 0x0000, + 0x0090, + 0x0001, + 0xd4c0, + + /*1, 32, + 0x6680 // P_corm_thres Lock algorithms configuration */ + + 11, 80, /* set ADC level to -16 */ + (1 << 13) - 825 - 117, + (1 << 13) - 837 - 117, + (1 << 13) - 811 - 117, + (1 << 13) - 766 - 117, + (1 << 13) - 737 - 117, + (1 << 13) - 693 - 117, + (1 << 13) - 648 - 117, + (1 << 13) - 619 - 117, + (1 << 13) - 575 - 117, + (1 << 13) - 531 - 117, + (1 << 13) - 501 - 117, + + 4, 108, + 0, + 0, + 0, + 0, + + 1, 175, + 0x0410, + 1, 179, + 8192, // P_fft_nb_to_cut + + 6, 181, + 0x2800, // P_coff_corthres_ ( 2k 4k 8k ) 0x2800 + 0x2800, + 0x2800, + 0x2800, // P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800 + 0x2800, + 0x2800, + + 2, 193, + 0x0666, // P_pha3_thres + 0x0000, // P_cti_use_cpe, P_cti_use_prog + + 2, 205, + 0x200f, // P_cspu_regul, P_cspu_win_cut + 0x000f, // P_des_shift_work + + 5, 215, + 0x023d, // P_adp_regul_cnt + 0x00a4, // P_adp_noise_cnt + 0x00a4, // P_adp_regul_ext + 0x7ff0, // P_adp_noise_ext + 0x3ccc, // P_adp_fil + + 1, 230, + 0x0000, // P_2d_byp_ti_num + + 1, 263, + 0x800, //P_equal_thres_wgn + + 1, 268, + (2 << 9) | 39, // P_equal_ctrl_synchro, P_equal_speedmode + + 1, 270, + 0x0001, // P_div_lock0_wait + 1, 285, + 0x0020, //p_fec_ + 1, 299, + 0x0062, /* P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard */ + + 1, 338, + (1 << 12) | // P_ctrl_corm_thres4pre_freq_inh=1 + (1 << 10) | + (0 << 9) | /* P_ctrl_pre_freq_inh=0 */ + (3 << 5) | /* P_ctrl_pre_freq_step=3 */ + (1 << 0), /* P_pre_freq_win_len=1 */ + + 0, +}; + +static u16 dib8000_identify(struct i2c_device *client) +{ + u16 value; + + //because of glitches sometimes + value = dib8000_i2c_read16(client, 896); + + if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) { + dprintk("wrong Vendor ID (read=0x%x)", value); + return 0; + } + + value = dib8000_i2c_read16(client, 897); + if (value != 0x8000 && value != 0x8001 && + value != 0x8002 && value != 0x8090) { + dprintk("wrong Device ID (%x)", value); + return 0; + } + + switch (value) { + case 0x8000: + dprintk("found DiB8000A"); + break; + case 0x8001: + dprintk("found DiB8000B"); + break; + case 0x8002: + dprintk("found DiB8000C"); + break; + case 0x8090: + dprintk("found DiB8096P"); + break; + } + return value; +} + +static int dib8000_reset(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + + if ((state->revision = dib8000_identify(&state->i2c)) == 0) + return -EINVAL; + + /* sram lead in, rdy */ + if (state->revision != 0x8090) + dib8000_write_word(state, 1287, 0x0003); + + if (state->revision == 0x8000) + dprintk("error : dib8000 MA not supported"); + + dibx000_reset_i2c_master(&state->i2c_master); + + dib8000_set_power_mode(state, DIB8000_POWER_ALL); + + /* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */ + dib8000_set_adc_state(state, DIBX000_ADC_OFF); + + /* restart all parts */ + dib8000_write_word(state, 770, 0xffff); + dib8000_write_word(state, 771, 0xffff); + dib8000_write_word(state, 772, 0xfffc); + if (state->revision == 0x8090) + dib8000_write_word(state, 1280, 0x0045); + else + dib8000_write_word(state, 1280, 0x004d); + dib8000_write_word(state, 1281, 0x000c); + + dib8000_write_word(state, 770, 0x0000); + dib8000_write_word(state, 771, 0x0000); + dib8000_write_word(state, 772, 0x0000); + dib8000_write_word(state, 898, 0x0004); // sad + dib8000_write_word(state, 1280, 0x0000); + dib8000_write_word(state, 1281, 0x0000); + + /* drives */ + if (state->revision != 0x8090) { + if (state->cfg.drives) + dib8000_write_word(state, 906, state->cfg.drives); + else { + dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal."); + /* min drive SDRAM - not optimal - adjust */ + dib8000_write_word(state, 906, 0x2d98); + } + } + + dib8000_reset_pll(state); + if (state->revision != 0x8090) + dib8000_write_word(state, 898, 0x0004); + + if (dib8000_reset_gpio(state) != 0) + dprintk("GPIO reset was not successful."); + + if ((state->revision != 0x8090) && + (dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0)) + dprintk("OUTPUT_MODE could not be resetted."); + + state->current_agc = NULL; + + // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ... + /* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */ + if (state->cfg.pll->ifreq == 0) + dib8000_write_word(state, 40, 0x0755); /* P_iqc_corr_inh = 0 enable IQcorr block */ + else + dib8000_write_word(state, 40, 0x1f55); /* P_iqc_corr_inh = 1 disable IQcorr block */ + + { + u16 l = 0, r; + const u16 *n; + n = dib8000_defaults; + l = *n++; + while (l) { + r = *n++; + do { + dib8000_write_word(state, r, *n++); + r++; + } while (--l); + l = *n++; + } + } + + state->isdbt_cfg_loaded = 0; + + //div_cfg override for special configs + if ((state->revision != 8090) && (state->cfg.div_cfg != 0)) + dib8000_write_word(state, 903, state->cfg.div_cfg); + + /* unforce divstr regardless whether i2c enumeration was done or not */ + dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1)); + + dib8000_set_bandwidth(fe, 6000); + + dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON); + dib8000_sad_calib(state); + if (state->revision != 0x8090) + dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF); + + /* ber_rs_len = 3 */ + dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); + + dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY); + + return 0; +} + +static void dib8000_restart_agc(struct dib8000_state *state) +{ + // P_restart_iqc & P_restart_agc + dib8000_write_word(state, 770, 0x0a00); + dib8000_write_word(state, 770, 0x0000); +} + +static int dib8000_update_lna(struct dib8000_state *state) +{ + u16 dyn_gain; + + if (state->cfg.update_lna) { + // read dyn_gain here (because it is demod-dependent and not tuner) + dyn_gain = dib8000_read_word(state, 390); + + if (state->cfg.update_lna(state->fe[0], dyn_gain)) { + dib8000_restart_agc(state); + return 1; + } + } + return 0; +} + +static int dib8000_set_agc_config(struct dib8000_state *state, u8 band) +{ + struct dibx000_agc_config *agc = NULL; + int i; + u16 reg; + + if (state->current_band == band && state->current_agc != NULL) + return 0; + state->current_band = band; + + for (i = 0; i < state->cfg.agc_config_count; i++) + if (state->cfg.agc[i].band_caps & band) { + agc = &state->cfg.agc[i]; + break; + } + + if (agc == NULL) { + dprintk("no valid AGC configuration found for band 0x%02x", band); + return -EINVAL; + } + + state->current_agc = agc; + + /* AGC */ + dib8000_write_word(state, 76, agc->setup); + dib8000_write_word(state, 77, agc->inv_gain); + dib8000_write_word(state, 78, agc->time_stabiliz); + dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock); + + // Demod AGC loop configuration + dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp); + dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp); + + dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d", + state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); + + /* AGC continued */ + if (state->wbd_ref != 0) + dib8000_write_word(state, 106, state->wbd_ref); + else // use default + dib8000_write_word(state, 106, agc->wbd_ref); + + if (state->revision == 0x8090) { + reg = dib8000_read_word(state, 922) & (0x3 << 2); + dib8000_write_word(state, 922, reg | (agc->wbd_sel << 2)); + } + + dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8)); + dib8000_write_word(state, 108, agc->agc1_max); + dib8000_write_word(state, 109, agc->agc1_min); + dib8000_write_word(state, 110, agc->agc2_max); + dib8000_write_word(state, 111, agc->agc2_min); + dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2); + dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2); + dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2); + dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); + + dib8000_write_word(state, 75, agc->agc1_pt3); + if (state->revision != 0x8090) + dib8000_write_word(state, 923, + (dib8000_read_word(state, 923) & 0xffe3) | + (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); + + return 0; +} + +void dib8000_pwm_agc_reset(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + dib8000_set_adc_state(state, DIBX000_ADC_ON); + dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))); +} +EXPORT_SYMBOL(dib8000_pwm_agc_reset); + +static int dib8000_agc_soft_split(struct dib8000_state *state) +{ + u16 agc, split_offset; + + if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0) + return FE_CALLBACK_TIME_NEVER; + + // n_agc_global + agc = dib8000_read_word(state, 390); + + if (agc > state->current_agc->split.min_thres) + split_offset = state->current_agc->split.min; + else if (agc < state->current_agc->split.max_thres) + split_offset = state->current_agc->split.max; + else + split_offset = state->current_agc->split.max * + (agc - state->current_agc->split.min_thres) / + (state->current_agc->split.max_thres - state->current_agc->split.min_thres); + + dprintk("AGC split_offset: %d", split_offset); + + // P_agc_force_split and P_agc_split_offset + dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset); + return 5000; +} + +static int dib8000_agc_startup(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + enum frontend_tune_state *tune_state = &state->tune_state; + int ret = 0; + u16 reg, upd_demod_gain_period = 0x8000; + + switch (*tune_state) { + case CT_AGC_START: + // set power-up level: interf+analog+AGC + + if (state->revision != 0x8090) + dib8000_set_adc_state(state, DIBX000_ADC_ON); + else { + dib8000_set_power_mode(state, DIB8000_POWER_ALL); + + reg = dib8000_read_word(state, 1947)&0xff00; + dib8000_write_word(state, 1946, + upd_demod_gain_period & 0xFFFF); + /* bit 14 = enDemodGain */ + dib8000_write_word(state, 1947, reg | (1<<14) | + ((upd_demod_gain_period >> 16) & 0xFF)); + + /* enable adc i & q */ + reg = dib8000_read_word(state, 1920); + dib8000_write_word(state, 1920, (reg | 0x3) & + (~(1 << 7))); + } + + if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) { + *tune_state = CT_AGC_STOP; + state->status = FE_STATUS_TUNE_FAILED; + break; + } + + ret = 70; + *tune_state = CT_AGC_STEP_0; + break; + + case CT_AGC_STEP_0: + //AGC initialization + if (state->cfg.agc_control) + state->cfg.agc_control(fe, 1); + + dib8000_restart_agc(state); + + // wait AGC rough lock time + ret = 50; + *tune_state = CT_AGC_STEP_1; + break; + + case CT_AGC_STEP_1: + // wait AGC accurate lock time + ret = 70; + + if (dib8000_update_lna(state)) + // wait only AGC rough lock time + ret = 50; + else + *tune_state = CT_AGC_STEP_2; + break; + + case CT_AGC_STEP_2: + dib8000_agc_soft_split(state); + + if (state->cfg.agc_control) + state->cfg.agc_control(fe, 0); + + *tune_state = CT_AGC_STOP; + break; + default: + ret = dib8000_agc_soft_split(state); + break; + } + return ret; + +} + +static void dib8096p_host_bus_drive(struct dib8000_state *state, u8 drive) +{ + u16 reg; + + drive &= 0x7; + + /* drive host bus 2, 3, 4 */ + reg = dib8000_read_word(state, 1798) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1798, reg); + + /* drive host bus 5,6 */ + reg = dib8000_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8)); + reg |= (drive<<8) | (drive<<2); + dib8000_write_word(state, 1799, reg); + + /* drive host bus 7, 8, 9 */ + reg = dib8000_read_word(state, 1800) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1800, reg); + + /* drive host bus 10, 11 */ + reg = dib8000_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8)); + reg |= (drive<<8) | (drive<<2); + dib8000_write_word(state, 1801, reg); + + /* drive host bus 12, 13, 14 */ + reg = dib8000_read_word(state, 1802) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1802, reg); +} + +static u32 dib8096p_calcSyncFreq(u32 P_Kin, u32 P_Kout, + u32 insertExtSynchro, u32 syncSize) +{ + u32 quantif = 3; + u32 nom = (insertExtSynchro * P_Kin+syncSize); + u32 denom = P_Kout; + u32 syncFreq = ((nom << quantif) / denom); + + if ((syncFreq & ((1 << quantif) - 1)) != 0) + syncFreq = (syncFreq >> quantif) + 1; + else + syncFreq = (syncFreq >> quantif); + + if (syncFreq != 0) + syncFreq = syncFreq - 1; + + return syncFreq; +} + +static void dib8096p_cfg_DibTx(struct dib8000_state *state, u32 P_Kin, + u32 P_Kout, u32 insertExtSynchro, u32 synchroMode, + u32 syncWord, u32 syncSize) +{ + dprintk("Configure DibStream Tx"); + + dib8000_write_word(state, 1615, 1); + dib8000_write_word(state, 1603, P_Kin); + dib8000_write_word(state, 1605, P_Kout); + dib8000_write_word(state, 1606, insertExtSynchro); + dib8000_write_word(state, 1608, synchroMode); + dib8000_write_word(state, 1609, (syncWord >> 16) & 0xffff); + dib8000_write_word(state, 1610, syncWord & 0xffff); + dib8000_write_word(state, 1612, syncSize); + dib8000_write_word(state, 1615, 0); +} + +static void dib8096p_cfg_DibRx(struct dib8000_state *state, u32 P_Kin, + u32 P_Kout, u32 synchroMode, u32 insertExtSynchro, + u32 syncWord, u32 syncSize, u32 dataOutRate) +{ + u32 syncFreq; + + dprintk("Configure DibStream Rx synchroMode = %d", synchroMode); + + if ((P_Kin != 0) && (P_Kout != 0)) { + syncFreq = dib8096p_calcSyncFreq(P_Kin, P_Kout, + insertExtSynchro, syncSize); + dib8000_write_word(state, 1542, syncFreq); + } + + dib8000_write_word(state, 1554, 1); + dib8000_write_word(state, 1536, P_Kin); + dib8000_write_word(state, 1537, P_Kout); + dib8000_write_word(state, 1539, synchroMode); + dib8000_write_word(state, 1540, (syncWord >> 16) & 0xffff); + dib8000_write_word(state, 1541, syncWord & 0xffff); + dib8000_write_word(state, 1543, syncSize); + dib8000_write_word(state, 1544, dataOutRate); + dib8000_write_word(state, 1554, 0); +} + +static void dib8096p_enMpegMux(struct dib8000_state *state, int onoff) +{ + u16 reg_1287; + + reg_1287 = dib8000_read_word(state, 1287); + + switch (onoff) { + case 1: + reg_1287 &= ~(1 << 8); + break; + case 0: + reg_1287 |= (1 << 8); + break; + } + + dib8000_write_word(state, 1287, reg_1287); +} + +static void dib8096p_configMpegMux(struct dib8000_state *state, + u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2) +{ + u16 reg_1287; + + dprintk("Enable Mpeg mux"); + + dib8096p_enMpegMux(state, 0); + + /* If the input mode is MPEG do not divide the serial clock */ + if ((enSerialMode == 1) && (state->input_mode_mpeg == 1)) + enSerialClkDiv2 = 0; + + reg_1287 = ((pulseWidth & 0x1f) << 3) | + ((enSerialMode & 0x1) << 2) | (enSerialClkDiv2 & 0x1); + dib8000_write_word(state, 1287, reg_1287); + + dib8096p_enMpegMux(state, 1); +} + +static void dib8096p_setDibTxMux(struct dib8000_state *state, int mode) +{ + u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 7); + + switch (mode) { + case MPEG_ON_DIBTX: + dprintk("SET MPEG ON DIBSTREAM TX"); + dib8096p_cfg_DibTx(state, 8, 5, 0, 0, 0, 0); + reg_1288 |= (1 << 9); break; + case DIV_ON_DIBTX: + dprintk("SET DIV_OUT ON DIBSTREAM TX"); + dib8096p_cfg_DibTx(state, 5, 5, 0, 0, 0, 0); + reg_1288 |= (1 << 8); break; + case ADC_ON_DIBTX: + dprintk("SET ADC_OUT ON DIBSTREAM TX"); + dib8096p_cfg_DibTx(state, 20, 5, 10, 0, 0, 0); + reg_1288 |= (1 << 7); break; + default: + break; + } + dib8000_write_word(state, 1288, reg_1288); +} + +static void dib8096p_setHostBusMux(struct dib8000_state *state, int mode) +{ + u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 4); + + switch (mode) { + case DEMOUT_ON_HOSTBUS: + dprintk("SET DEM OUT OLD INTERF ON HOST BUS"); + dib8096p_enMpegMux(state, 0); + reg_1288 |= (1 << 6); + break; + case DIBTX_ON_HOSTBUS: + dprintk("SET DIBSTREAM TX ON HOST BUS"); + dib8096p_enMpegMux(state, 0); + reg_1288 |= (1 << 5); + break; + case MPEG_ON_HOSTBUS: + dprintk("SET MPEG MUX ON HOST BUS"); + reg_1288 |= (1 << 4); + break; + default: + break; + } + dib8000_write_word(state, 1288, reg_1288); +} + +static int dib8096p_set_diversity_in(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 reg_1287; + + switch (onoff) { + case 0: /* only use the internal way - not the diversity input */ + dprintk("%s mode OFF : by default Enable Mpeg INPUT", + __func__); + /* outputRate = 8 */ + dib8096p_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0); + + /* Do not divide the serial clock of MPEG MUX in + SERIAL MODE in case input mode MPEG is used */ + reg_1287 = dib8000_read_word(state, 1287); + /* enSerialClkDiv2 == 1 ? */ + if ((reg_1287 & 0x1) == 1) { + /* force enSerialClkDiv2 = 0 */ + reg_1287 &= ~0x1; + dib8000_write_word(state, 1287, reg_1287); + } + state->input_mode_mpeg = 1; + break; + case 1: /* both ways */ + case 2: /* only the diversity input */ + dprintk("%s ON : Enable diversity INPUT", __func__); + dib8096p_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0); + state->input_mode_mpeg = 0; + break; + } + + dib8000_set_diversity_in(state->fe[0], onoff); + return 0; +} + +static int dib8096p_set_output_mode(struct dvb_frontend *fe, int mode) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 outreg, smo_mode, fifo_threshold; + u8 prefer_mpeg_mux_use = 1; + int ret = 0; + + state->output_mode = mode; + dib8096p_host_bus_drive(state, 1); + + fifo_threshold = 1792; + smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1); + outreg = dib8000_read_word(state, 1286) & + ~((1 << 10) | (0x7 << 6) | (1 << 1)); + + switch (mode) { + case OUTMODE_HIGH_Z: + outreg = 0; + break; + + case OUTMODE_MPEG2_SERIAL: + if (prefer_mpeg_mux_use) { + dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux"); + dib8096p_configMpegMux(state, 3, 1, 1); + dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS); + } else {/* Use Smooth block */ + dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc"); + dib8096p_setHostBusMux(state, + DEMOUT_ON_HOSTBUS); + outreg |= (2 << 6) | (0 << 1); + } + break; + + case OUTMODE_MPEG2_PAR_GATED_CLK: + if (prefer_mpeg_mux_use) { + dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux"); + dib8096p_configMpegMux(state, 2, 0, 0); + dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS); + } else { /* Use Smooth block */ + dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block"); + dib8096p_setHostBusMux(state, + DEMOUT_ON_HOSTBUS); + outreg |= (0 << 6); + } + break; + + case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */ + dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block"); + dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (1 << 6); + break; + + case OUTMODE_MPEG2_FIFO: + /* Using Smooth block because not supported + by new Mpeg Mux bloc */ + dprintk("dib8096P setting output mode TS_FIFO using Smooth block"); + dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (5 << 6); + smo_mode |= (3 << 1); + fifo_threshold = 512; + break; + + case OUTMODE_DIVERSITY: + dprintk("dib8096P setting output mode MODE_DIVERSITY"); + dib8096p_setDibTxMux(state, DIV_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + break; + + case OUTMODE_ANALOG_ADC: + dprintk("dib8096P setting output mode MODE_ANALOG_ADC"); + dib8096p_setDibTxMux(state, ADC_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + break; + } + + if (mode != OUTMODE_HIGH_Z) + outreg |= (1<<10); + + dprintk("output_mpeg2_in_188_bytes = %d", + state->cfg.output_mpeg2_in_188_bytes); + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + + ret |= dib8000_write_word(state, 299, smo_mode); + /* synchronous fread */ + ret |= dib8000_write_word(state, 299 + 1, fifo_threshold); + ret |= dib8000_write_word(state, 1286, outreg); + + return ret; +} + +static int map_addr_to_serpar_number(struct i2c_msg *msg) +{ + if (msg->buf[0] <= 15) + msg->buf[0] -= 1; + else if (msg->buf[0] == 17) + msg->buf[0] = 15; + else if (msg->buf[0] == 16) + msg->buf[0] = 17; + else if (msg->buf[0] == 19) + msg->buf[0] = 16; + else if (msg->buf[0] >= 21 && msg->buf[0] <= 25) + msg->buf[0] -= 3; + else if (msg->buf[0] == 28) + msg->buf[0] = 23; + else if (msg->buf[0] == 99) + msg->buf[0] = 99; + else + return -EINVAL; + return 0; +} + +static int dib8096p_tuner_write_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u8 n_overflow = 1; + u16 i = 1000; + u16 serpar_num = msg[0].buf[0]; + + while (n_overflow == 1 && i) { + n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1; + i--; + if (i == 0) + dprintk("Tuner ITF: write busy (overflow)"); + } + dib8000_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f)); + dib8000_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]); + + return num; +} + +static int dib8096p_tuner_read_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u8 n_overflow = 1, n_empty = 1; + u16 i = 1000; + u16 serpar_num = msg[0].buf[0]; + u16 read_word; + + while (n_overflow == 1 && i) { + n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1; + i--; + if (i == 0) + dprintk("TunerITF: read busy (overflow)"); + } + dib8000_write_word(state, 1985, (0<<6) | (serpar_num&0x3f)); + + i = 1000; + while (n_empty == 1 && i) { + n_empty = dib8000_read_word(state, 1984)&0x1; + i--; + if (i == 0) + dprintk("TunerITF: read busy (empty)"); + } + + read_word = dib8000_read_word(state, 1987); + msg[1].buf[0] = (read_word >> 8) & 0xff; + msg[1].buf[1] = (read_word) & 0xff; + + return num; +} + +static int dib8096p_tuner_rw_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + if (map_addr_to_serpar_number(&msg[0]) == 0) { + if (num == 1) /* write */ + return dib8096p_tuner_write_serpar(i2c_adap, msg, 1); + else /* read */ + return dib8096p_tuner_read_serpar(i2c_adap, msg, 2); + } + return num; +} + +static int dib8096p_rw_on_apb(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num, u16 apb_address) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u16 word; + + if (num == 1) { /* write */ + dib8000_write_word(state, apb_address, + ((msg[0].buf[1] << 8) | (msg[0].buf[2]))); + } else { + word = dib8000_read_word(state, apb_address); + msg[1].buf[0] = (word >> 8) & 0xff; + msg[1].buf[1] = (word) & 0xff; + } + return num; +} + +static int dib8096p_tuner_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u16 apb_address = 0, word; + int i = 0; + + switch (msg[0].buf[0]) { + case 0x12: + apb_address = 1920; + break; + case 0x14: + apb_address = 1921; + break; + case 0x24: + apb_address = 1922; + break; + case 0x1a: + apb_address = 1923; + break; + case 0x22: + apb_address = 1924; + break; + case 0x33: + apb_address = 1926; + break; + case 0x34: + apb_address = 1927; + break; + case 0x35: + apb_address = 1928; + break; + case 0x36: + apb_address = 1929; + break; + case 0x37: + apb_address = 1930; + break; + case 0x38: + apb_address = 1931; + break; + case 0x39: + apb_address = 1932; + break; + case 0x2a: + apb_address = 1935; + break; + case 0x2b: + apb_address = 1936; + break; + case 0x2c: + apb_address = 1937; + break; + case 0x2d: + apb_address = 1938; + break; + case 0x2e: + apb_address = 1939; + break; + case 0x2f: + apb_address = 1940; + break; + case 0x30: + apb_address = 1941; + break; + case 0x31: + apb_address = 1942; + break; + case 0x32: + apb_address = 1943; + break; + case 0x3e: + apb_address = 1944; + break; + case 0x3f: + apb_address = 1945; + break; + case 0x40: + apb_address = 1948; + break; + case 0x25: + apb_address = 936; + break; + case 0x26: + apb_address = 937; + break; + case 0x27: + apb_address = 938; + break; + case 0x28: + apb_address = 939; + break; + case 0x1d: + /* get sad sel request */ + i = ((dib8000_read_word(state, 921) >> 12)&0x3); + word = dib8000_read_word(state, 924+i); + msg[1].buf[0] = (word >> 8) & 0xff; + msg[1].buf[1] = (word) & 0xff; + return num; + case 0x1f: + if (num == 1) { /* write */ + word = (u16) ((msg[0].buf[1] << 8) | + msg[0].buf[2]); + /* in the VGAMODE Sel are located on bit 0/1 */ + word &= 0x3; + word = (dib8000_read_word(state, 921) & + ~(3<<12)) | (word<<12); + /* Set the proper input */ + dib8000_write_word(state, 921, word); + return num; + } + } + + if (apb_address != 0) /* R/W acces via APB */ + return dib8096p_rw_on_apb(i2c_adap, msg, num, apb_address); + else /* R/W access via SERPAR */ + return dib8096p_tuner_rw_serpar(i2c_adap, msg, num); + + return 0; +} + +static u32 dib8096p_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dib8096p_tuner_xfer_algo = { + .master_xfer = dib8096p_tuner_xfer, + .functionality = dib8096p_i2c_func, +}; + +struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe) +{ + struct dib8000_state *st = fe->demodulator_priv; + return &st->dib8096p_tuner_adap; +} +EXPORT_SYMBOL(dib8096p_get_i2c_tuner); + +int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 en_cur_state; + + dprintk("sleep dib8096p: %d", onoff); + + en_cur_state = dib8000_read_word(state, 1922); + + /* LNAs and MIX are ON and therefore it is a valid configuration */ + if (en_cur_state > 0xff) + state->tuner_enable = en_cur_state ; + + if (onoff) + en_cur_state &= 0x00ff; + else { + if (state->tuner_enable != 0) + en_cur_state = state->tuner_enable; + } + + dib8000_write_word(state, 1922, en_cur_state); + + return 0; +} +EXPORT_SYMBOL(dib8096p_tuner_sleep); + +static const s32 lut_1000ln_mant[] = +{ + 908, 7003, 7090, 7170, 7244, 7313, 7377, 7438, 7495, 7549, 7600 +}; + +s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode) +{ + struct dib8000_state *state = fe->demodulator_priv; + u32 ix = 0, tmp_val = 0, exp = 0, mant = 0; + s32 val; + + val = dib8000_read32(state, 384); + if (mode) { + tmp_val = val; + while (tmp_val >>= 1) + exp++; + mant = (val * 1000 / (1<demodulator_priv; + int val = 0; + + switch (IQ) { + case 1: + val = dib8000_read_word(state, 403); + break; + case 0: + val = dib8000_read_word(state, 404); + break; + } + if (val & 0x200) + val -= 1024; + + return val; +} +EXPORT_SYMBOL(dib8090p_get_dc_power); + +static void dib8000_update_timf(struct dib8000_state *state) +{ + u32 timf = state->timf = dib8000_read32(state, 435); + + dib8000_write_word(state, 29, (u16) (timf >> 16)); + dib8000_write_word(state, 30, (u16) (timf & 0xffff)); + dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default); +} + +u32 dib8000_ctrl_timf(struct dvb_frontend *fe, uint8_t op, uint32_t timf) +{ + struct dib8000_state *state = fe->demodulator_priv; + + switch (op) { + case DEMOD_TIMF_SET: + state->timf = timf; + break; + case DEMOD_TIMF_UPDATE: + dib8000_update_timf(state); + break; + case DEMOD_TIMF_GET: + break; + } + dib8000_set_bandwidth(state->fe[0], 6000); + + return state->timf; +} +EXPORT_SYMBOL(dib8000_ctrl_timf); + +static const u16 adc_target_16dB[11] = { + (1 << 13) - 825 - 117, + (1 << 13) - 837 - 117, + (1 << 13) - 811 - 117, + (1 << 13) - 766 - 117, + (1 << 13) - 737 - 117, + (1 << 13) - 693 - 117, + (1 << 13) - 648 - 117, + (1 << 13) - 619 - 117, + (1 << 13) - 575 - 117, + (1 << 13) - 531 - 117, + (1 << 13) - 501 - 117 +}; +static const u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 }; + +static u16 dib8000_set_layer(struct dib8000_state *state, u8 layer_index, u16 max_constellation) +{ + u8 cr, constellation, time_intlv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + + switch (c->layer[layer_index].modulation) { + case DQPSK: + constellation = 0; + break; + case QPSK: + constellation = 1; + break; + case QAM_16: + constellation = 2; + break; + case QAM_64: + default: + constellation = 3; + break; + } + + switch (c->layer[layer_index].fec) { + case FEC_1_2: + cr = 1; + break; + case FEC_2_3: + cr = 2; + break; + case FEC_3_4: + cr = 3; + break; + case FEC_5_6: + cr = 5; + break; + case FEC_7_8: + default: + cr = 7; + break; + } + + if ((c->layer[layer_index].interleaving > 0) && ((c->layer[layer_index].interleaving <= 3) || (c->layer[layer_index].interleaving == 4 && c->isdbt_sb_mode == 1))) + time_intlv = c->layer[layer_index].interleaving; + else + time_intlv = 0; + + dib8000_write_word(state, 2 + layer_index, (constellation << 10) | ((c->layer[layer_index].segment_count & 0xf) << 6) | (cr << 3) | time_intlv); + if (c->layer[layer_index].segment_count > 0) { + switch (max_constellation) { + case DQPSK: + case QPSK: + if (c->layer[layer_index].modulation == QAM_16 || c->layer[layer_index].modulation == QAM_64) + max_constellation = c->layer[layer_index].modulation; + break; + case QAM_16: + if (c->layer[layer_index].modulation == QAM_64) + max_constellation = c->layer[layer_index].modulation; + break; + } + } + + return max_constellation; +} + +static const u16 adp_Q64[4] = {0x0148, 0xfff0, 0x00a4, 0xfff8}; /* P_adp_regul_cnt 0.04, P_adp_noise_cnt -0.002, P_adp_regul_ext 0.02, P_adp_noise_ext -0.001 */ +static const u16 adp_Q16[4] = {0x023d, 0xffdf, 0x00a4, 0xfff0}; /* P_adp_regul_cnt 0.07, P_adp_noise_cnt -0.004, P_adp_regul_ext 0.02, P_adp_noise_ext -0.002 */ +static const u16 adp_Qdefault[4] = {0x099a, 0xffae, 0x0333, 0xfff8}; /* P_adp_regul_cnt 0.3, P_adp_noise_cnt -0.01, P_adp_regul_ext 0.1, P_adp_noise_ext -0.002 */ +static u16 dib8000_adp_fine_tune(struct dib8000_state *state, u16 max_constellation) +{ + u16 i, ana_gain = 0; + const u16 *adp; + + /* channel estimation fine configuration */ + switch (max_constellation) { + case QAM_64: + ana_gain = 0x7; + adp = &adp_Q64[0]; + break; + case QAM_16: + ana_gain = 0x7; + adp = &adp_Q16[0]; + break; + default: + ana_gain = 0; + adp = &adp_Qdefault[0]; + break; + } + + for (i = 0; i < 4; i++) + dib8000_write_word(state, 215 + i, adp[i]); + + return ana_gain; +} + +static void dib8000_update_ana_gain(struct dib8000_state *state, u16 ana_gain) +{ + u16 i; + + dib8000_write_word(state, 116, ana_gain); + + /* update ADC target depending on ana_gain */ + if (ana_gain) { /* set -16dB ADC target for ana_gain=-1 */ + for (i = 0; i < 10; i++) + dib8000_write_word(state, 80 + i, adc_target_16dB[i]); + } else { /* set -22dB ADC target for ana_gain=0 */ + for (i = 0; i < 10; i++) + dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355); + } +} + +static void dib8000_load_ana_fe_coefs(struct dib8000_state *state, const s16 *ana_fe) +{ + u16 mode = 0; + + if (state->isdbt_cfg_loaded == 0) + for (mode = 0; mode < 24; mode++) + dib8000_write_word(state, 117 + mode, ana_fe[mode]); +} + +static const u16 lut_prbs_2k[14] = { + 0, 0x423, 0x009, 0x5C7, 0x7A6, 0x3D8, 0x527, 0x7FF, 0x79B, 0x3D6, 0x3A2, 0x53B, 0x2F4, 0x213 +}; +static const u16 lut_prbs_4k[14] = { + 0, 0x208, 0x0C3, 0x7B9, 0x423, 0x5C7, 0x3D8, 0x7FF, 0x3D6, 0x53B, 0x213, 0x029, 0x0D0, 0x48E +}; +static const u16 lut_prbs_8k[14] = { + 0, 0x740, 0x069, 0x7DD, 0x208, 0x7B9, 0x5C7, 0x7FF, 0x53B, 0x029, 0x48E, 0x4C4, 0x367, 0x684 +}; + +static u16 dib8000_get_init_prbs(struct dib8000_state *state, u16 subchannel) +{ + int sub_channel_prbs_group = 0; + + sub_channel_prbs_group = (subchannel / 3) + 1; + dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x", sub_channel_prbs_group, subchannel, lut_prbs_8k[sub_channel_prbs_group]); + + switch (state->fe[0]->dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_2K: + return lut_prbs_2k[sub_channel_prbs_group]; + case TRANSMISSION_MODE_4K: + return lut_prbs_4k[sub_channel_prbs_group]; + default: + case TRANSMISSION_MODE_8K: + return lut_prbs_8k[sub_channel_prbs_group]; + } +} + +static void dib8000_set_13seg_channel(struct dib8000_state *state) +{ + u16 i; + u16 coff_pow = 0x2800; + + state->seg_mask = 0x1fff; /* All 13 segments enabled */ + + /* ---- COFF ---- Carloff, the most robust --- */ + if (state->isdbt_cfg_loaded == 0) { /* if not Sound Broadcasting mode : put default values for 13 segments */ + dib8000_write_word(state, 180, (16 << 6) | 9); + dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2); + coff_pow = 0x2800; + for (i = 0; i < 6; i++) + dib8000_write_word(state, 181+i, coff_pow); + + /* P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1 */ + /* P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1 */ + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1); + + /* P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6 */ + dib8000_write_word(state, 340, (8 << 6) | (6 << 0)); + /* P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1 */ + dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0)); + + dib8000_write_word(state, 228, 0); /* default value */ + dib8000_write_word(state, 265, 31); /* default value */ + dib8000_write_word(state, 205, 0x200f); /* init value */ + } + + /* + * make the cpil_coff_lock more robust but slower p_coff_winlen + * 6bits; p_coff_thres_lock 6bits (for coff lock if needed) + */ + + if (state->cfg.pll->ifreq == 0) + dib8000_write_word(state, 266, ~state->seg_mask | state->seg_diff_mask | 0x40); /* P_equal_noise_seg_inh */ + + dib8000_load_ana_fe_coefs(state, ana_fe_coeff_13seg); +} + +static void dib8000_set_subchannel_prbs(struct dib8000_state *state, u16 init_prbs) +{ + u16 reg_1; + + reg_1 = dib8000_read_word(state, 1); + dib8000_write_word(state, 1, (init_prbs << 2) | (reg_1 & 0x3)); /* ADDR 1 */ +} + +static void dib8000_small_fine_tune(struct dib8000_state *state) +{ + u16 i; + const s16 *ncoeff; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + + dib8000_write_word(state, 352, state->seg_diff_mask); + dib8000_write_word(state, 353, state->seg_mask); + + /* P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5 */ + dib8000_write_word(state, 351, (c->isdbt_sb_mode << 9) | (c->isdbt_sb_mode << 8) | (13 << 4) | 5); + + if (c->isdbt_sb_mode) { + /* ---- SMALL ---- */ + switch (c->transmission_mode) { + case TRANSMISSION_MODE_2K: + if (c->isdbt_partial_reception == 0) { /* 1-seg */ + if (c->layer[0].modulation == DQPSK) /* DQPSK */ + ncoeff = coeff_2k_sb_1seg_dqpsk; + else /* QPSK or QAM */ + ncoeff = coeff_2k_sb_1seg; + } else { /* 3-segments */ + if (c->layer[0].modulation == DQPSK) { /* DQPSK on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_2k_sb_3seg_0dqpsk; + } else { /* QPSK or QAM on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_2k_sb_3seg_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_2k_sb_3seg; + } + } + break; + case TRANSMISSION_MODE_4K: + if (c->isdbt_partial_reception == 0) { /* 1-seg */ + if (c->layer[0].modulation == DQPSK) /* DQPSK */ + ncoeff = coeff_4k_sb_1seg_dqpsk; + else /* QPSK or QAM */ + ncoeff = coeff_4k_sb_1seg; + } else { /* 3-segments */ + if (c->layer[0].modulation == DQPSK) { /* DQPSK on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_4k_sb_3seg_0dqpsk; + } else { /* QPSK or QAM on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_4k_sb_3seg_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_4k_sb_3seg; + } + } + break; + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_8K: + default: + if (c->isdbt_partial_reception == 0) { /* 1-seg */ + if (c->layer[0].modulation == DQPSK) /* DQPSK */ + ncoeff = coeff_8k_sb_1seg_dqpsk; + else /* QPSK or QAM */ + ncoeff = coeff_8k_sb_1seg; + } else { /* 3-segments */ + if (c->layer[0].modulation == DQPSK) { /* DQPSK on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_8k_sb_3seg_0dqpsk; + } else { /* QPSK or QAM on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_8k_sb_3seg_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_8k_sb_3seg; + } + } + break; + } + + for (i = 0; i < 8; i++) + dib8000_write_word(state, 343 + i, ncoeff[i]); + } +} + +static const u16 coff_thres_1seg[3] = {300, 150, 80}; +static const u16 coff_thres_3seg[3] = {350, 300, 250}; +static void dib8000_set_sb_channel(struct dib8000_state *state) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + const u16 *coff; + u16 i; + + if (c->transmission_mode == TRANSMISSION_MODE_2K || c->transmission_mode == TRANSMISSION_MODE_4K) { + dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1); /* adp_pass =1 */ + dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14)); /* pha3_force_pha_shift = 1 */ + } else { + dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); /* adp_pass =0 */ + dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff); /* pha3_force_pha_shift = 0 */ + } + + if (c->isdbt_partial_reception == 1) /* 3-segments */ + state->seg_mask = 0x00E0; + else /* 1-segment */ + state->seg_mask = 0x0040; + + dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200); + + /* ---- COFF ---- Carloff, the most robust --- */ + /* P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64, P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1 */ + dib8000_write_word(state, 187, (4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~c->isdbt_partial_reception & 1) << 2) | 0x3); + + dib8000_write_word(state, 340, (16 << 6) | (8 << 0)); /* P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8 */ + dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));/* P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1 */ + + /* Sound Broadcasting mode 1 seg */ + if (c->isdbt_partial_reception == 0) { + /* P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width = (P_mode == 3) , P_coff_one_seg_sym = (P_mode-1) */ + if (state->mode == 3) + dib8000_write_word(state, 180, 0x1fcf | ((state->mode - 1) << 14)); + else + dib8000_write_word(state, 180, 0x0fcf | ((state->mode - 1) << 14)); + + /* P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4 */ + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4); + coff = &coff_thres_1seg[0]; + } else { /* Sound Broadcasting mode 3 seg */ + dib8000_write_word(state, 180, 0x1fcf | (1 << 14)); + /* P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4 */ + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4); + coff = &coff_thres_3seg[0]; + } + + dib8000_write_word(state, 228, 1); /* P_2d_mode_byp=1 */ + dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0); /* P_cspu_win_cut = 0 */ + + if (c->isdbt_partial_reception == 0 && c->transmission_mode == TRANSMISSION_MODE_2K) + dib8000_write_word(state, 265, 15); /* P_equal_noise_sel = 15 */ + + /* Write COFF thres */ + for (i = 0 ; i < 3; i++) { + dib8000_write_word(state, 181+i, coff[i]); + dib8000_write_word(state, 184+i, coff[i]); + } + + /* + * make the cpil_coff_lock more robust but slower p_coff_winlen + * 6bits; p_coff_thres_lock 6bits (for coff lock if needed) + */ + + dib8000_write_word(state, 266, ~state->seg_mask | state->seg_diff_mask); /* P_equal_noise_seg_inh */ + + if (c->isdbt_partial_reception == 0) + dib8000_write_word(state, 178, 64); /* P_fft_powrange = 64 */ + else + dib8000_write_word(state, 178, 32); /* P_fft_powrange = 32 */ +} + +static void dib8000_set_isdbt_common_channel(struct dib8000_state *state, u8 seq, u8 autosearching) +{ + u16 p_cfr_left_edge = 0, p_cfr_right_edge = 0; + u16 tmcc_pow = 0, ana_gain = 0, tmp = 0, i = 0, nbseg_diff = 0 ; + u16 max_constellation = DQPSK; + int init_prbs; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + + /* P_mode */ + dib8000_write_word(state, 10, (seq << 4)); + + /* init mode */ + state->mode = fft_to_mode(state); + + /* set guard */ + tmp = dib8000_read_word(state, 1); + dib8000_write_word(state, 1, (tmp&0xfffc) | (c->guard_interval & 0x3)); + + dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) | ((c->isdbt_partial_reception & 1) << 5) | ((c->isdbt_sb_mode & 1) << 4)); + + /* signal optimization parameter */ + if (c->isdbt_partial_reception) { + state->seg_diff_mask = (c->layer[0].modulation == DQPSK) << permu_seg[0]; + for (i = 1; i < 3; i++) + nbseg_diff += (c->layer[i].modulation == DQPSK) * c->layer[i].segment_count; + for (i = 0; i < nbseg_diff; i++) + state->seg_diff_mask |= 1 << permu_seg[i+1]; + } else { + for (i = 0; i < 3; i++) + nbseg_diff += (c->layer[i].modulation == DQPSK) * c->layer[i].segment_count; + for (i = 0; i < nbseg_diff; i++) + state->seg_diff_mask |= 1 << permu_seg[i]; + } + + if (state->seg_diff_mask) + dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200); + else + dib8000_write_word(state, 268, (2 << 9) | 39); /*init value */ + + for (i = 0; i < 3; i++) + max_constellation = dib8000_set_layer(state, i, max_constellation); + if (autosearching == 0) { + state->layer_b_nb_seg = c->layer[1].segment_count; + state->layer_c_nb_seg = c->layer[2].segment_count; + } + + /* WRITE: Mode & Diff mask */ + dib8000_write_word(state, 0, (state->mode << 13) | state->seg_diff_mask); + + state->differential_constellation = (state->seg_diff_mask != 0); + + /* channel estimation fine configuration */ + ana_gain = dib8000_adp_fine_tune(state, max_constellation); + + /* update ana_gain depending on max constellation */ + dib8000_update_ana_gain(state, ana_gain); + + /* ---- ANA_FE ---- */ + if (c->isdbt_partial_reception) /* 3-segments */ + dib8000_load_ana_fe_coefs(state, ana_fe_coeff_3seg); + else + dib8000_load_ana_fe_coefs(state, ana_fe_coeff_1seg); /* 1-segment */ + + /* TSB or ISDBT ? apply it now */ + if (c->isdbt_sb_mode) { + dib8000_set_sb_channel(state); + if (c->isdbt_sb_subchannel < 14) + init_prbs = dib8000_get_init_prbs(state, c->isdbt_sb_subchannel); + else + init_prbs = 0; + } else { + dib8000_set_13seg_channel(state); + init_prbs = 0xfff; + } + + /* SMALL */ + dib8000_small_fine_tune(state); + + dib8000_set_subchannel_prbs(state, init_prbs); + + /* ---- CHAN_BLK ---- */ + for (i = 0; i < 13; i++) { + if ((((~state->seg_diff_mask) >> i) & 1) == 1) { + p_cfr_left_edge += (1 << i) * ((i == 0) || ((((state->seg_mask & (~state->seg_diff_mask)) >> (i - 1)) & 1) == 0)); + p_cfr_right_edge += (1 << i) * ((i == 12) || ((((state->seg_mask & (~state->seg_diff_mask)) >> (i + 1)) & 1) == 0)); + } + } + dib8000_write_word(state, 222, p_cfr_left_edge); /* p_cfr_left_edge */ + dib8000_write_word(state, 223, p_cfr_right_edge); /* p_cfr_right_edge */ + /* "P_cspu_left_edge" & "P_cspu_right_edge" not used => do not care */ + + dib8000_write_word(state, 189, ~state->seg_mask | state->seg_diff_mask); /* P_lmod4_seg_inh */ + dib8000_write_word(state, 192, ~state->seg_mask | state->seg_diff_mask); /* P_pha3_seg_inh */ + dib8000_write_word(state, 225, ~state->seg_mask | state->seg_diff_mask); /* P_tac_seg_inh */ + + if (!autosearching) + dib8000_write_word(state, 288, (~state->seg_mask | state->seg_diff_mask) & 0x1fff); /* P_tmcc_seg_eq_inh */ + else + dib8000_write_word(state, 288, 0x1fff); /*disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels. */ + + dib8000_write_word(state, 211, state->seg_mask & (~state->seg_diff_mask)); /* P_des_seg_enabled */ + dib8000_write_word(state, 287, ~state->seg_mask | 0x1000); /* P_tmcc_seg_inh */ + + dib8000_write_word(state, 178, 32); /* P_fft_powrange = 32 */ + + /* ---- TMCC ---- */ + for (i = 0; i < 3; i++) + tmcc_pow += (((c->layer[i].modulation == DQPSK) * 4 + 1) * c->layer[i].segment_count) ; + + /* Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9); */ + /* Threshold is set at 1/4 of max power. */ + tmcc_pow *= (1 << (9-2)); + dib8000_write_word(state, 290, tmcc_pow); /* P_tmcc_dec_thres_2k */ + dib8000_write_word(state, 291, tmcc_pow); /* P_tmcc_dec_thres_4k */ + dib8000_write_word(state, 292, tmcc_pow); /* P_tmcc_dec_thres_8k */ + /*dib8000_write_word(state, 287, (1 << 13) | 0x1000 ); */ + + /* ---- PHA3 ---- */ + if (state->isdbt_cfg_loaded == 0) + dib8000_write_word(state, 250, 3285); /* p_2d_hspeed_thr0 */ + + state->isdbt_cfg_loaded = 0; +} + +static u32 dib8000_wait_lock(struct dib8000_state *state, u32 internal, + u32 wait0_ms, u32 wait1_ms, u32 wait2_ms) +{ + u32 value = 0; /* P_search_end0 wait time */ + u16 reg = 11; /* P_search_end0 start addr */ + + for (reg = 11; reg < 16; reg += 2) { + if (reg == 11) { + if (state->revision == 0x8090) + value = internal * wait1_ms; + else + value = internal * wait0_ms; + } else if (reg == 13) + value = internal * wait1_ms; + else if (reg == 15) + value = internal * wait2_ms; + dib8000_write_word(state, reg, (u16)((value >> 16) & 0xffff)); + dib8000_write_word(state, (reg + 1), (u16)(value & 0xffff)); + } + return value; +} + +static int dib8000_autosearch_start(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u8 slist = 0; + u32 value, internal = state->cfg.pll->internal; + + if (state->revision == 0x8090) + internal = dib8000_read32(state, 23) / 1000; + + if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_FFT)) { + dib8000_write_word(state, 37, 0x0065); /* P_ctrl_pha_off_max default values */ + dib8000_write_word(state, 116, 0x0000); /* P_ana_gain to 0 */ + + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x1fff) | (0 << 13) | (1 << 15)); /* P_mode = 0, P_restart_search=1 */ + dib8000_write_word(state, 1, (dib8000_read_word(state, 1) & 0xfffc) | 0); /* P_guard = 0 */ + dib8000_write_word(state, 6, 0); /* P_lock0_mask = 0 */ + dib8000_write_word(state, 7, 0); /* P_lock1_mask = 0 */ + dib8000_write_word(state, 8, 0); /* P_lock2_mask = 0 */ + dib8000_write_word(state, 10, (dib8000_read_word(state, 10) & 0x200) | (16 << 4) | (0 << 0)); /* P_search_list=16, P_search_maxtrial=0 */ + + if (state->revision == 0x8090) + value = dib8000_wait_lock(state, internal, 10, 10, 10); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + else + value = dib8000_wait_lock(state, internal, 20, 20, 20); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + + dib8000_write_word(state, 17, 0); + dib8000_write_word(state, 18, 200); /* P_search_rstst = 200 */ + dib8000_write_word(state, 19, 0); + dib8000_write_word(state, 20, 400); /* P_search_rstend = 400 */ + dib8000_write_word(state, 21, (value >> 16) & 0xffff); /* P_search_checkst */ + dib8000_write_word(state, 22, value & 0xffff); + + if (state->revision == 0x8090) + dib8000_write_word(state, 32, (dib8000_read_word(state, 32) & 0xf0ff) | (0 << 8)); /* P_corm_alpha = 0 */ + else + dib8000_write_word(state, 32, (dib8000_read_word(state, 32) & 0xf0ff) | (9 << 8)); /* P_corm_alpha = 3 */ + dib8000_write_word(state, 355, 2); /* P_search_param_max = 2 */ + + /* P_search_param_select = (1 | 1<<4 | 1 << 8) */ + dib8000_write_word(state, 356, 0); + dib8000_write_word(state, 357, 0x111); + + dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (1 << 13)); /* P_restart_ccg = 1 */ + dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (0 << 13)); /* P_restart_ccg = 0 */ + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x7ff) | (0 << 15) | (1 << 13)); /* P_restart_search = 0; */ + } else if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_GUARD)) { + c->transmission_mode = TRANSMISSION_MODE_8K; + c->guard_interval = GUARD_INTERVAL_1_8; + c->inversion = 0; + c->layer[0].modulation = QAM_64; + c->layer[0].fec = FEC_2_3; + c->layer[0].interleaving = 0; + c->layer[0].segment_count = 13; + + slist = 16; + c->transmission_mode = state->found_nfft; + + dib8000_set_isdbt_common_channel(state, slist, 1); + + /* set lock_mask values */ + dib8000_write_word(state, 6, 0x4); + if (state->revision == 0x8090) + dib8000_write_word(state, 7, ((1 << 12) | (1 << 11) | (1 << 10)));/* tmcc_dec_lock, tmcc_sync_lock, tmcc_data_lock, tmcc_bch_uncor */ + else + dib8000_write_word(state, 7, 0x8); + dib8000_write_word(state, 8, 0x1000); + + /* set lock_mask wait time values */ + if (state->revision == 0x8090) + dib8000_wait_lock(state, internal, 50, 100, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + else + dib8000_wait_lock(state, internal, 50, 200, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + + dib8000_write_word(state, 355, 3); /* P_search_param_max = 3 */ + + /* P_search_param_select = 0xf; look for the 4 different guard intervals */ + dib8000_write_word(state, 356, 0); + dib8000_write_word(state, 357, 0xf); + + value = dib8000_read_word(state, 0); + dib8000_write_word(state, 0, (u16)((1 << 15) | value)); + dib8000_read_word(state, 1284); /* reset the INT. n_irq_pending */ + dib8000_write_word(state, 0, (u16)value); + } else { + c->inversion = 0; + c->layer[0].modulation = QAM_64; + c->layer[0].fec = FEC_2_3; + c->layer[0].interleaving = 0; + c->layer[0].segment_count = 13; + if (!c->isdbt_sb_mode) + c->layer[0].segment_count = 13; + + /* choose the right list, in sb, always do everything */ + if (c->isdbt_sb_mode) { + slist = 7; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); + } else { + if (c->guard_interval == GUARD_INTERVAL_AUTO) { + if (c->transmission_mode == TRANSMISSION_MODE_AUTO) { + c->transmission_mode = TRANSMISSION_MODE_8K; + c->guard_interval = GUARD_INTERVAL_1_8; + slist = 7; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); /* P_mode = 1 to have autosearch start ok with mode2 */ + } else { + c->guard_interval = GUARD_INTERVAL_1_8; + slist = 3; + } + } else { + if (c->transmission_mode == TRANSMISSION_MODE_AUTO) { + c->transmission_mode = TRANSMISSION_MODE_8K; + slist = 2; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); /* P_mode = 1 */ + } else + slist = 0; + } + } + dprintk("Using list for autosearch : %d", slist); + + dib8000_set_isdbt_common_channel(state, slist, 1); + + /* set lock_mask values */ + dib8000_write_word(state, 6, 0x4); + if (state->revision == 0x8090) + dib8000_write_word(state, 7, (1 << 12) | (1 << 11) | (1 << 10)); + else + dib8000_write_word(state, 7, 0x8); + dib8000_write_word(state, 8, 0x1000); + + /* set lock_mask wait time values */ + if (state->revision == 0x8090) + dib8000_wait_lock(state, internal, 50, 200, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + else + dib8000_wait_lock(state, internal, 50, 100, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + + value = dib8000_read_word(state, 0); + dib8000_write_word(state, 0, (u16)((1 << 15) | value)); + dib8000_read_word(state, 1284); /* reset the INT. n_irq_pending */ + dib8000_write_word(state, 0, (u16)value); + } + return 0; +} + +static int dib8000_autosearch_irq(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 irq_pending = dib8000_read_word(state, 1284); + + if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_FFT)) { + if (irq_pending & 0x1) { + dprintk("dib8000_autosearch_irq: max correlation result available"); + return 3; + } + } else { + if (irq_pending & 0x1) { /* failed */ + dprintk("dib8000_autosearch_irq failed"); + return 1; + } + + if (irq_pending & 0x2) { /* succeeded */ + dprintk("dib8000_autosearch_irq succeeded"); + return 2; + } + } + + return 0; // still pending +} + +static void dib8000_viterbi_state(struct dib8000_state *state, u8 onoff) +{ + u16 tmp; + + tmp = dib8000_read_word(state, 771); + if (onoff) /* start P_restart_chd : channel_decoder */ + dib8000_write_word(state, 771, tmp & 0xfffd); + else /* stop P_restart_chd : channel_decoder */ + dib8000_write_word(state, 771, tmp | (1<<1)); +} + +static void dib8000_set_dds(struct dib8000_state *state, s32 offset_khz) +{ + s16 unit_khz_dds_val; + u32 abs_offset_khz = ABS(offset_khz); + u32 dds = state->cfg.pll->ifreq & 0x1ffffff; + u8 invert = !!(state->cfg.pll->ifreq & (1 << 25)); + u8 ratio; + + if (state->revision == 0x8090) { + ratio = 4; + unit_khz_dds_val = (1<<26) / (dib8000_read32(state, 23) / 1000); + if (offset_khz < 0) + dds = (1 << 26) - (abs_offset_khz * unit_khz_dds_val); + else + dds = (abs_offset_khz * unit_khz_dds_val); + + if (invert) + dds = (1<<26) - dds; + } else { + ratio = 2; + unit_khz_dds_val = (u16) (67108864 / state->cfg.pll->internal); + + if (offset_khz < 0) + unit_khz_dds_val *= -1; + + /* IF tuner */ + if (invert) + dds -= abs_offset_khz * unit_khz_dds_val; + else + dds += abs_offset_khz * unit_khz_dds_val; + } + + dprintk("setting a DDS frequency offset of %c%dkHz", invert ? '-' : ' ', dds / unit_khz_dds_val); + + if (abs_offset_khz <= (state->cfg.pll->internal / ratio)) { + /* Max dds offset is the half of the demod freq */ + dib8000_write_word(state, 26, invert); + dib8000_write_word(state, 27, (u16)(dds >> 16) & 0x1ff); + dib8000_write_word(state, 28, (u16)(dds & 0xffff)); + } +} + +static void dib8000_set_frequency_offset(struct dib8000_state *state) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + int i; + u32 current_rf; + int total_dds_offset_khz; + + if (state->fe[0]->ops.tuner_ops.get_frequency) + state->fe[0]->ops.tuner_ops.get_frequency(state->fe[0], ¤t_rf); + else + current_rf = c->frequency; + current_rf /= 1000; + total_dds_offset_khz = (int)current_rf - (int)c->frequency / 1000; + + if (c->isdbt_sb_mode) { + state->subchannel = c->isdbt_sb_subchannel; + + i = dib8000_read_word(state, 26) & 1; /* P_dds_invspec */ + dib8000_write_word(state, 26, c->inversion ^ i); + + if (state->cfg.pll->ifreq == 0) { /* low if tuner */ + if ((c->inversion ^ i) == 0) + dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1); + } else { + if ((c->inversion ^ i) == 0) + total_dds_offset_khz *= -1; + } + } + + dprintk("%dkhz tuner offset (frequency = %dHz & current_rf = %dHz) total_dds_offset_hz = %d", c->frequency - current_rf, c->frequency, current_rf, total_dds_offset_khz); + + /* apply dds offset now */ + dib8000_set_dds(state, total_dds_offset_khz); +} + +static u16 LUT_isdbt_symbol_duration[4] = { 26, 101, 63 }; + +static u32 dib8000_get_symbol_duration(struct dib8000_state *state) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u16 i; + + switch (c->transmission_mode) { + case TRANSMISSION_MODE_2K: + i = 0; + break; + case TRANSMISSION_MODE_4K: + i = 2; + break; + default: + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_8K: + i = 1; + break; + } + + return (LUT_isdbt_symbol_duration[i] / (c->bandwidth_hz / 1000)) + 1; +} + +static void dib8000_set_isdbt_loop_params(struct dib8000_state *state, enum param_loop_step loop_step) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u16 reg_32 = 0, reg_37 = 0; + + switch (loop_step) { + case LOOP_TUNE_1: + if (c->isdbt_sb_mode) { + if (c->isdbt_partial_reception == 0) { + reg_32 = ((11 - state->mode) << 12) | (6 << 8) | 0x40; /* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x40 */ + reg_37 = (3 << 5) | (0 << 4) | (10 - state->mode); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (10-P_mode) */ + } else { /* Sound Broadcasting mode 3 seg */ + reg_32 = ((10 - state->mode) << 12) | (6 << 8) | 0x60; /* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x60 */ + reg_37 = (3 << 5) | (0 << 4) | (9 - state->mode); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (9-P_mode) */ + } + } else { /* 13-seg start conf offset loop parameters */ + reg_32 = ((9 - state->mode) << 12) | (6 << 8) | 0x80; /* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */ + reg_37 = (3 << 5) | (0 << 4) | (8 - state->mode); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = 9 */ + } + break; + case LOOP_TUNE_2: + if (c->isdbt_sb_mode) { + if (c->isdbt_partial_reception == 0) { /* Sound Broadcasting mode 1 seg */ + reg_32 = ((13-state->mode) << 12) | (6 << 8) | 0x40; /* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40*/ + reg_37 = (12-state->mode) | ((5 + state->mode) << 5); + } else { /* Sound Broadcasting mode 3 seg */ + reg_32 = ((12-state->mode) << 12) | (6 << 8) | 0x60; /* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60 */ + reg_37 = (11-state->mode) | ((5 + state->mode) << 5); + } + } else { /* 13 seg */ + reg_32 = ((11-state->mode) << 12) | (6 << 8) | 0x80; /* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80 */ + reg_37 = ((5+state->mode) << 5) | (10 - state->mode); + } + break; + } + dib8000_write_word(state, 32, reg_32); + dib8000_write_word(state, 37, reg_37); +} + +static void dib8000_demod_restart(struct dib8000_state *state) +{ + dib8000_write_word(state, 770, 0x4000); + dib8000_write_word(state, 770, 0x0000); + return; +} + +static void dib8000_set_sync_wait(struct dib8000_state *state) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u16 sync_wait = 64; + + /* P_dvsy_sync_wait - reuse mode */ + switch (c->transmission_mode) { + case TRANSMISSION_MODE_8K: + sync_wait = 256; + break; + case TRANSMISSION_MODE_4K: + sync_wait = 128; + break; + default: + case TRANSMISSION_MODE_2K: + sync_wait = 64; + break; + } + + if (state->cfg.diversity_delay == 0) + sync_wait = (sync_wait * (1 << (c->guard_interval)) * 3) / 2 + 48; /* add 50% SFN margin + compensate for one DVSY-fifo */ + else + sync_wait = (sync_wait * (1 << (c->guard_interval)) * 3) / 2 + state->cfg.diversity_delay; /* add 50% SFN margin + compensate for DVSY-fifo */ + + dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | (sync_wait << 4)); +} + +static u32 dib8000_get_timeout(struct dib8000_state *state, u32 delay, enum timeout_mode mode) +{ + if (mode == SYMBOL_DEPENDENT_ON) + return systime() + (delay * state->symbol_duration); + else + return systime() + delay; +} + +static s32 dib8000_get_status(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + return state->status; +} + +enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + return state->tune_state; +} +EXPORT_SYMBOL(dib8000_get_tune_state); + +int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) +{ + struct dib8000_state *state = fe->demodulator_priv; + + state->tune_state = tune_state; + return 0; +} +EXPORT_SYMBOL(dib8000_set_tune_state); + +static int dib8000_tune_restart_from_demod(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + + state->status = FE_STATUS_TUNE_PENDING; + state->tune_state = CT_DEMOD_START; + return 0; +} + +static u16 dib8000_read_lock(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + + if (state->revision == 0x8090) + return dib8000_read_word(state, 570); + return dib8000_read_word(state, 568); +} + +static int dib8090p_init_sdram(struct dib8000_state *state) +{ + u16 reg = 0; + dprintk("init sdram"); + + reg = dib8000_read_word(state, 274) & 0xfff0; + dib8000_write_word(state, 274, reg | 0x7); /* P_dintlv_delay_ram = 7 because of MobileSdram */ + + dib8000_write_word(state, 1803, (7 << 2)); + + reg = dib8000_read_word(state, 1280); + dib8000_write_word(state, 1280, reg | (1 << 2)); /* force restart P_restart_sdram */ + dib8000_write_word(state, 1280, reg); /* release restart P_restart_sdram */ + + return 0; +} + +static int dib8000_tune(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + enum frontend_tune_state *tune_state = &state->tune_state; + + u16 locks, deeper_interleaver = 0, i; + int ret = 1; /* 1 symbol duration (in 100us unit) delay most of the time */ + + u32 *timeout = &state->timeout; + u32 now = systime(); +#ifdef DIB8000_AGC_FREEZE + u16 agc1, agc2; +#endif + + u32 corm[4] = {0, 0, 0, 0}; + u8 find_index, max_value; + +#if 0 + if (*tune_state < CT_DEMOD_STOP) + dprintk("IN: context status = %d, TUNE_STATE %d autosearch step = %u systime = %u", state->channel_parameters_set, *tune_state, state->autosearch_state, now); +#endif + + switch (*tune_state) { + case CT_DEMOD_START: /* 30 */ + if (state->revision == 0x8090) + dib8090p_init_sdram(state); + state->status = FE_STATUS_TUNE_PENDING; + if ((c->delivery_system != SYS_ISDBT) || + (c->inversion == INVERSION_AUTO) || + (c->transmission_mode == TRANSMISSION_MODE_AUTO) || + (c->guard_interval == GUARD_INTERVAL_AUTO) || + (((c->isdbt_layer_enabled & (1 << 0)) != 0) && + (c->layer[0].segment_count != 0xff) && + (c->layer[0].segment_count != 0) && + ((c->layer[0].modulation == QAM_AUTO) || + (c->layer[0].fec == FEC_AUTO))) || + (((c->isdbt_layer_enabled & (1 << 1)) != 0) && + (c->layer[1].segment_count != 0xff) && + (c->layer[1].segment_count != 0) && + ((c->layer[1].modulation == QAM_AUTO) || + (c->layer[1].fec == FEC_AUTO))) || + (((c->isdbt_layer_enabled & (1 << 2)) != 0) && + (c->layer[2].segment_count != 0xff) && + (c->layer[2].segment_count != 0) && + ((c->layer[2].modulation == QAM_AUTO) || + (c->layer[2].fec == FEC_AUTO))) || + (((c->layer[0].segment_count == 0) || + ((c->isdbt_layer_enabled & (1 << 0)) == 0)) && + ((c->layer[1].segment_count == 0) || + ((c->isdbt_layer_enabled & (2 << 0)) == 0)) && + ((c->layer[2].segment_count == 0) || ((c->isdbt_layer_enabled & (3 << 0)) == 0)))) + state->channel_parameters_set = 0; /* auto search */ + else + state->channel_parameters_set = 1; /* channel parameters are known */ + + dib8000_viterbi_state(state, 0); /* force chan dec in restart */ + + /* Layer monit */ + dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60); + + dib8000_set_frequency_offset(state); + dib8000_set_bandwidth(fe, c->bandwidth_hz / 1000); + + if (state->channel_parameters_set == 0) { /* The channel struct is unknown, search it ! */ +#ifdef DIB8000_AGC_FREEZE + if (state->revision != 0x8090) { + state->agc1_max = dib8000_read_word(state, 108); + state->agc1_min = dib8000_read_word(state, 109); + state->agc2_max = dib8000_read_word(state, 110); + state->agc2_min = dib8000_read_word(state, 111); + agc1 = dib8000_read_word(state, 388); + agc2 = dib8000_read_word(state, 389); + dib8000_write_word(state, 108, agc1); + dib8000_write_word(state, 109, agc1); + dib8000_write_word(state, 110, agc2); + dib8000_write_word(state, 111, agc2); + } +#endif + state->autosearch_state = AS_SEARCHING_FFT; + state->found_nfft = TRANSMISSION_MODE_AUTO; + state->found_guard = GUARD_INTERVAL_AUTO; + *tune_state = CT_DEMOD_SEARCH_NEXT; + } else { /* we already know the channel struct so TUNE only ! */ + state->autosearch_state = AS_DONE; + *tune_state = CT_DEMOD_STEP_3; + } + state->symbol_duration = dib8000_get_symbol_duration(state); + break; + + case CT_DEMOD_SEARCH_NEXT: /* 51 */ + dib8000_autosearch_start(fe); + if (state->revision == 0x8090) + ret = 50; + else + ret = 15; + *tune_state = CT_DEMOD_STEP_1; + break; + + case CT_DEMOD_STEP_1: /* 31 */ + switch (dib8000_autosearch_irq(fe)) { + case 1: /* fail */ + state->status = FE_STATUS_TUNE_FAILED; + state->autosearch_state = AS_DONE; + *tune_state = CT_DEMOD_STOP; /* else we are done here */ + break; + case 2: /* Succes */ + state->status = FE_STATUS_FFT_SUCCESS; /* signal to the upper layer, that there was a channel found and the parameters can be read */ + *tune_state = CT_DEMOD_STEP_3; + if (state->autosearch_state == AS_SEARCHING_GUARD) + *tune_state = CT_DEMOD_STEP_2; + else + state->autosearch_state = AS_DONE; + break; + case 3: /* Autosearch FFT max correlation endded */ + *tune_state = CT_DEMOD_STEP_2; + break; + } + break; + + case CT_DEMOD_STEP_2: + switch (state->autosearch_state) { + case AS_SEARCHING_FFT: + /* searching for the correct FFT */ + if (state->revision == 0x8090) { + corm[2] = (dib8000_read_word(state, 596) << 16) | (dib8000_read_word(state, 597)); + corm[1] = (dib8000_read_word(state, 598) << 16) | (dib8000_read_word(state, 599)); + corm[0] = (dib8000_read_word(state, 600) << 16) | (dib8000_read_word(state, 601)); + } else { + corm[2] = (dib8000_read_word(state, 594) << 16) | (dib8000_read_word(state, 595)); + corm[1] = (dib8000_read_word(state, 596) << 16) | (dib8000_read_word(state, 597)); + corm[0] = (dib8000_read_word(state, 598) << 16) | (dib8000_read_word(state, 599)); + } + /* dprintk("corm fft: %u %u %u", corm[0], corm[1], corm[2]); */ + + max_value = 0; + for (find_index = 1 ; find_index < 3 ; find_index++) { + if (corm[max_value] < corm[find_index]) + max_value = find_index ; + } + + switch (max_value) { + case 0: + state->found_nfft = TRANSMISSION_MODE_2K; + break; + case 1: + state->found_nfft = TRANSMISSION_MODE_4K; + break; + case 2: + default: + state->found_nfft = TRANSMISSION_MODE_8K; + break; + } + /* dprintk("Autosearch FFT has found Mode %d", max_value + 1); */ + + *tune_state = CT_DEMOD_SEARCH_NEXT; + state->autosearch_state = AS_SEARCHING_GUARD; + if (state->revision == 0x8090) + ret = 50; + else + ret = 10; + break; + case AS_SEARCHING_GUARD: + /* searching for the correct guard interval */ + if (state->revision == 0x8090) + state->found_guard = dib8000_read_word(state, 572) & 0x3; + else + state->found_guard = dib8000_read_word(state, 570) & 0x3; + /* dprintk("guard interval found=%i", state->found_guard); */ + + *tune_state = CT_DEMOD_STEP_3; + break; + default: + /* the demod should never be in this state */ + state->status = FE_STATUS_TUNE_FAILED; + state->autosearch_state = AS_DONE; + *tune_state = CT_DEMOD_STOP; /* else we are done here */ + break; + } + break; + + case CT_DEMOD_STEP_3: /* 33 */ + state->symbol_duration = dib8000_get_symbol_duration(state); + dib8000_set_isdbt_loop_params(state, LOOP_TUNE_1); + dib8000_set_isdbt_common_channel(state, 0, 0);/* setting the known channel parameters here */ + *tune_state = CT_DEMOD_STEP_4; + break; + + case CT_DEMOD_STEP_4: /* (34) */ + dib8000_demod_restart(state); + + dib8000_set_sync_wait(state); + dib8000_set_diversity_in(state->fe[0], state->diversity_onoff); + + locks = (dib8000_read_word(state, 180) >> 6) & 0x3f; /* P_coff_winlen ? */ + /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this lenght to lock */ + *timeout = dib8000_get_timeout(state, 2 * locks, SYMBOL_DEPENDENT_ON); + *tune_state = CT_DEMOD_STEP_5; + break; + + case CT_DEMOD_STEP_5: /* (35) */ + locks = dib8000_read_lock(fe); + if (locks & (0x3 << 11)) { /* coff-lock and off_cpil_lock achieved */ + dib8000_update_timf(state); /* we achieved a coff_cpil_lock - it's time to update the timf */ + if (!state->differential_constellation) { + /* 2 times lmod4_win_len + 10 symbols (pipe delay after coff + nb to compute a 1st correlation) */ + *timeout = dib8000_get_timeout(state, (20 * ((dib8000_read_word(state, 188)>>5)&0x1f)), SYMBOL_DEPENDENT_ON); + *tune_state = CT_DEMOD_STEP_7; + } else { + *tune_state = CT_DEMOD_STEP_8; + } + } else if (now > *timeout) { + *tune_state = CT_DEMOD_STEP_6; /* goto check for diversity input connection */ + } + break; + + case CT_DEMOD_STEP_6: /* (36) if there is an input (diversity) */ + if ((state->fe[1] != NULL) && (state->output_mode != OUTMODE_DIVERSITY)) { + /* if there is a diversity fe in input and this fe is has not already failled : wait here until this this fe has succedeed or failled */ + if (dib8000_get_status(state->fe[1]) <= FE_STATUS_STD_SUCCESS) /* Something is locked on the input fe */ + *tune_state = CT_DEMOD_STEP_8; /* go for mpeg */ + else if (dib8000_get_status(state->fe[1]) >= FE_STATUS_TUNE_TIME_TOO_SHORT) { /* fe in input failled also, break the current one */ + *tune_state = CT_DEMOD_STOP; /* else we are done here ; step 8 will close the loops and exit */ + dib8000_viterbi_state(state, 1); /* start viterbi chandec */ + dib8000_set_isdbt_loop_params(state, LOOP_TUNE_2); + state->status = FE_STATUS_TUNE_FAILED; + } + } else { + dib8000_viterbi_state(state, 1); /* start viterbi chandec */ + dib8000_set_isdbt_loop_params(state, LOOP_TUNE_2); + *tune_state = CT_DEMOD_STOP; /* else we are done here ; step 8 will close the loops and exit */ + state->status = FE_STATUS_TUNE_FAILED; + } + break; + + case CT_DEMOD_STEP_7: /* 37 */ + locks = dib8000_read_lock(fe); + if (locks & (1<<10)) { /* lmod4_lock */ + ret = 14; /* wait for 14 symbols */ + *tune_state = CT_DEMOD_STEP_8; + } else if (now > *timeout) + *tune_state = CT_DEMOD_STEP_6; /* goto check for diversity input connection */ + break; + + case CT_DEMOD_STEP_8: /* 38 */ + dib8000_viterbi_state(state, 1); /* start viterbi chandec */ + dib8000_set_isdbt_loop_params(state, LOOP_TUNE_2); + + /* mpeg will never lock on this condition because init_prbs is not set : search for it !*/ + if (c->isdbt_sb_mode + && c->isdbt_sb_subchannel < 14 + && !state->differential_constellation) { + state->subchannel = 0; + *tune_state = CT_DEMOD_STEP_11; + } else { + *tune_state = CT_DEMOD_STEP_9; + state->status = FE_STATUS_LOCKED; + } + break; + + case CT_DEMOD_STEP_9: /* 39 */ + if ((state->revision == 0x8090) || ((dib8000_read_word(state, 1291) >> 9) & 0x1)) { /* fe capable of deinterleaving : esram */ + /* defines timeout for mpeg lock depending on interleaver lenght of longest layer */ + for (i = 0; i < 3; i++) { + if (c->layer[i].interleaving >= deeper_interleaver) { + dprintk("layer%i: time interleaver = %d ", i, c->layer[i].interleaving); + if (c->layer[i].segment_count > 0) { /* valid layer */ + deeper_interleaver = c->layer[0].interleaving; + state->longest_intlv_layer = i; + } + } + } + + if (deeper_interleaver == 0) + locks = 2; /* locks is the tmp local variable name */ + else if (deeper_interleaver == 3) + locks = 8; + else + locks = 2 * deeper_interleaver; + + if (state->diversity_onoff != 0) /* because of diversity sync */ + locks *= 2; + + *timeout = now + (2000 * locks); /* give the mpeg lock 800ms if sram is present */ + dprintk("Deeper interleaver mode = %d on layer %d : timeout mult factor = %d => will use timeout = %d", deeper_interleaver, state->longest_intlv_layer, locks, *timeout); + + *tune_state = CT_DEMOD_STEP_10; + } else + *tune_state = CT_DEMOD_STOP; + break; + + case CT_DEMOD_STEP_10: /* 40 */ + locks = dib8000_read_lock(fe); + if (locks&(1<<(7-state->longest_intlv_layer))) { /* mpeg lock : check the longest one */ + dprintk("Mpeg locks [ L0 : %d | L1 : %d | L2 : %d ]", (locks>>7)&0x1, (locks>>6)&0x1, (locks>>5)&0x1); + if (c->isdbt_sb_mode + && c->isdbt_sb_subchannel < 14 + && !state->differential_constellation) + /* signal to the upper layer, that there was a channel found and the parameters can be read */ + state->status = FE_STATUS_DEMOD_SUCCESS; + else + state->status = FE_STATUS_DATA_LOCKED; + *tune_state = CT_DEMOD_STOP; + } else if (now > *timeout) { + if (c->isdbt_sb_mode + && c->isdbt_sb_subchannel < 14 + && !state->differential_constellation) { /* continue to try init prbs autosearch */ + state->subchannel += 3; + *tune_state = CT_DEMOD_STEP_11; + } else { /* we are done mpeg of the longest interleaver xas not locking but let's try if an other layer has locked in the same time */ + if (locks & (0x7<<5)) { + dprintk("Mpeg locks [ L0 : %d | L1 : %d | L2 : %d ]", (locks>>7)&0x1, (locks>>6)&0x1, (locks>>5)&0x1); + state->status = FE_STATUS_DATA_LOCKED; + } else + state->status = FE_STATUS_TUNE_FAILED; + *tune_state = CT_DEMOD_STOP; + } + } + break; + + case CT_DEMOD_STEP_11: /* 41 : init prbs autosearch */ + if (state->subchannel <= 41) { + dib8000_set_subchannel_prbs(state, dib8000_get_init_prbs(state, state->subchannel)); + *tune_state = CT_DEMOD_STEP_9; + } else { + *tune_state = CT_DEMOD_STOP; + state->status = FE_STATUS_TUNE_FAILED; + } + break; + + default: + break; + } + + /* tuning is finished - cleanup the demod */ + switch (*tune_state) { + case CT_DEMOD_STOP: /* (42) */ +#ifdef DIB8000_AGC_FREEZE + if ((state->revision != 0x8090) && (state->agc1_max != 0)) { + dib8000_write_word(state, 108, state->agc1_max); + dib8000_write_word(state, 109, state->agc1_min); + dib8000_write_word(state, 110, state->agc2_max); + dib8000_write_word(state, 111, state->agc2_min); + state->agc1_max = 0; + state->agc1_min = 0; + state->agc2_max = 0; + state->agc2_min = 0; + } +#endif + ret = FE_CALLBACK_TIME_NEVER; + break; + default: + break; + } + + if ((ret > 0) && (*tune_state > CT_DEMOD_STEP_3)) + return ret * state->symbol_duration; + if ((ret > 0) && (ret < state->symbol_duration)) + return state->symbol_duration; /* at least one symbol */ + return ret; +} + +static int dib8000_wakeup(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend; + int ret; + + dib8000_set_power_mode(state, DIB8000_POWER_ALL); + dib8000_set_adc_state(state, DIBX000_ADC_ON); + if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0) + dprintk("could not start Slow ADC"); + + if (state->revision == 0x8090) + dib8000_sad_calib(state); + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + ret = state->fe[index_frontend]->ops.init(state->fe[index_frontend]); + if (ret < 0) + return ret; + } + + return 0; +} + +static int dib8000_sleep(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend; + int ret; + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]); + if (ret < 0) + return ret; + } + + if (state->revision != 0x8090) + dib8000_set_output_mode(fe, OUTMODE_HIGH_Z); + dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY); + return dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(state, DIBX000_ADC_OFF); +} + +static int dib8000_get_frontend(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 i, val = 0; + fe_status_t stat; + u8 index_frontend, sub_index_frontend; + + fe->dtv_property_cache.bandwidth_hz = 6000000; + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat); + if (stat&FE_HAS_SYNC) { + dprintk("TMCC lock on the slave%i", index_frontend); + /* synchronize the cache with the other frontends */ + state->fe[index_frontend]->ops.get_frontend(state->fe[index_frontend]); + for (sub_index_frontend = 0; (sub_index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[sub_index_frontend] != NULL); sub_index_frontend++) { + if (sub_index_frontend != index_frontend) { + state->fe[sub_index_frontend]->dtv_property_cache.isdbt_sb_mode = state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode; + state->fe[sub_index_frontend]->dtv_property_cache.inversion = state->fe[index_frontend]->dtv_property_cache.inversion; + state->fe[sub_index_frontend]->dtv_property_cache.transmission_mode = state->fe[index_frontend]->dtv_property_cache.transmission_mode; + state->fe[sub_index_frontend]->dtv_property_cache.guard_interval = state->fe[index_frontend]->dtv_property_cache.guard_interval; + state->fe[sub_index_frontend]->dtv_property_cache.isdbt_partial_reception = state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception; + for (i = 0; i < 3; i++) { + state->fe[sub_index_frontend]->dtv_property_cache.layer[i].segment_count = state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count; + state->fe[sub_index_frontend]->dtv_property_cache.layer[i].interleaving = state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving; + state->fe[sub_index_frontend]->dtv_property_cache.layer[i].fec = state->fe[index_frontend]->dtv_property_cache.layer[i].fec; + state->fe[sub_index_frontend]->dtv_property_cache.layer[i].modulation = state->fe[index_frontend]->dtv_property_cache.layer[i].modulation; + } + } + } + return 0; + } + } + + fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1; + + if (state->revision == 0x8090) + val = dib8000_read_word(state, 572); + else + val = dib8000_read_word(state, 570); + fe->dtv_property_cache.inversion = (val & 0x40) >> 6; + switch ((val & 0x30) >> 4) { + case 1: + fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K; + break; + case 3: + default: + fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; + break; + } + + switch (val & 0x3) { + case 0: + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32; + dprintk("dib8000_get_frontend GI = 1/32 "); + break; + case 1: + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16; + dprintk("dib8000_get_frontend GI = 1/16 "); + break; + case 2: + dprintk("dib8000_get_frontend GI = 1/8 "); + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + dprintk("dib8000_get_frontend GI = 1/4 "); + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4; + break; + } + + val = dib8000_read_word(state, 505); + fe->dtv_property_cache.isdbt_partial_reception = val & 1; + dprintk("dib8000_get_frontend : partial_reception = %d ", fe->dtv_property_cache.isdbt_partial_reception); + + for (i = 0; i < 3; i++) { + val = dib8000_read_word(state, 493 + i); + fe->dtv_property_cache.layer[i].segment_count = val & 0x0F; + dprintk("dib8000_get_frontend : Layer %d segments = %d ", i, fe->dtv_property_cache.layer[i].segment_count); + + val = dib8000_read_word(state, 499 + i); + fe->dtv_property_cache.layer[i].interleaving = val & 0x3; + dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ", i, fe->dtv_property_cache.layer[i].interleaving); + + val = dib8000_read_word(state, 481 + i); + switch (val & 0x7) { + case 1: + fe->dtv_property_cache.layer[i].fec = FEC_1_2; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i); + break; + case 2: + fe->dtv_property_cache.layer[i].fec = FEC_2_3; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i); + break; + case 3: + fe->dtv_property_cache.layer[i].fec = FEC_3_4; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i); + break; + case 5: + fe->dtv_property_cache.layer[i].fec = FEC_5_6; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i); + break; + default: + fe->dtv_property_cache.layer[i].fec = FEC_7_8; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i); + break; + } + + val = dib8000_read_word(state, 487 + i); + switch (val & 0x3) { + case 0: + dprintk("dib8000_get_frontend : Layer %d DQPSK ", i); + fe->dtv_property_cache.layer[i].modulation = DQPSK; + break; + case 1: + fe->dtv_property_cache.layer[i].modulation = QPSK; + dprintk("dib8000_get_frontend : Layer %d QPSK ", i); + break; + case 2: + fe->dtv_property_cache.layer[i].modulation = QAM_16; + dprintk("dib8000_get_frontend : Layer %d QAM16 ", i); + break; + case 3: + default: + dprintk("dib8000_get_frontend : Layer %d QAM64 ", i); + fe->dtv_property_cache.layer[i].modulation = QAM_64; + break; + } + } + + /* synchronize the cache with the other frontends */ + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode = fe->dtv_property_cache.isdbt_sb_mode; + state->fe[index_frontend]->dtv_property_cache.inversion = fe->dtv_property_cache.inversion; + state->fe[index_frontend]->dtv_property_cache.transmission_mode = fe->dtv_property_cache.transmission_mode; + state->fe[index_frontend]->dtv_property_cache.guard_interval = fe->dtv_property_cache.guard_interval; + state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception = fe->dtv_property_cache.isdbt_partial_reception; + for (i = 0; i < 3; i++) { + state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count = fe->dtv_property_cache.layer[i].segment_count; + state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving = fe->dtv_property_cache.layer[i].interleaving; + state->fe[index_frontend]->dtv_property_cache.layer[i].fec = fe->dtv_property_cache.layer[i].fec; + state->fe[index_frontend]->dtv_property_cache.layer[i].modulation = fe->dtv_property_cache.layer[i].modulation; + } + } + return 0; +} + +static int dib8000_set_frontend(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + int l, i, active, time, ret, time_slave = FE_CALLBACK_TIME_NEVER; + u8 exit_condition, index_frontend; + u32 delay, callback_time; + + if (c->frequency == 0) { + dprintk("dib8000: must at least specify frequency "); + return 0; + } + + if (c->bandwidth_hz == 0) { + dprintk("dib8000: no bandwidth specified, set to default "); + c->bandwidth_hz = 6000000; + } + + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + /* synchronization of the cache */ + state->fe[index_frontend]->dtv_property_cache.delivery_system = SYS_ISDBT; + memcpy(&state->fe[index_frontend]->dtv_property_cache, &fe->dtv_property_cache, sizeof(struct dtv_frontend_properties)); + + /* set output mode and diversity input */ + if (state->revision != 0x8090) { + dib8000_set_diversity_in(state->fe[index_frontend], 1); + if (index_frontend != 0) + dib8000_set_output_mode(state->fe[index_frontend], + OUTMODE_DIVERSITY); + else + dib8000_set_output_mode(state->fe[0], OUTMODE_HIGH_Z); + } else { + dib8096p_set_diversity_in(state->fe[index_frontend], 1); + if (index_frontend != 0) + dib8096p_set_output_mode(state->fe[index_frontend], + OUTMODE_DIVERSITY); + else + dib8096p_set_output_mode(state->fe[0], OUTMODE_HIGH_Z); + } + + /* tune the tuner */ + if (state->fe[index_frontend]->ops.tuner_ops.set_params) + state->fe[index_frontend]->ops.tuner_ops.set_params(state->fe[index_frontend]); + + dib8000_set_tune_state(state->fe[index_frontend], CT_AGC_START); + } + + /* turn off the diversity of the last chip */ + if (state->revision != 0x8090) + dib8000_set_diversity_in(state->fe[index_frontend - 1], 0); + else + dib8096p_set_diversity_in(state->fe[index_frontend - 1], 0); + + /* start up the AGC */ + do { + time = dib8000_agc_startup(state->fe[0]); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + time_slave = dib8000_agc_startup(state->fe[index_frontend]); + if (time == FE_CALLBACK_TIME_NEVER) + time = time_slave; + else if ((time_slave != FE_CALLBACK_TIME_NEVER) && (time_slave > time)) + time = time_slave; + } + if (time != FE_CALLBACK_TIME_NEVER) + msleep(time / 10); + else + break; + exit_condition = 1; + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + if (dib8000_get_tune_state(state->fe[index_frontend]) != CT_AGC_STOP) { + exit_condition = 0; + break; + } + } + } while (exit_condition == 0); + + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + dib8000_set_tune_state(state->fe[index_frontend], CT_DEMOD_START); + + active = 1; + do { + callback_time = FE_CALLBACK_TIME_NEVER; + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + delay = dib8000_tune(state->fe[index_frontend]); + if (delay != FE_CALLBACK_TIME_NEVER) + delay += systime(); + + /* we are in autosearch */ + if (state->channel_parameters_set == 0) { /* searching */ + if ((dib8000_get_status(state->fe[index_frontend]) == FE_STATUS_DEMOD_SUCCESS) || (dib8000_get_status(state->fe[index_frontend]) == FE_STATUS_FFT_SUCCESS)) { + dprintk("autosearch succeeded on fe%i", index_frontend); + dib8000_get_frontend(state->fe[index_frontend]); /* we read the channel parameters from the frontend which was successful */ + state->channel_parameters_set = 1; + + for (l = 0; (l < MAX_NUMBER_OF_FRONTENDS) && (state->fe[l] != NULL); l++) { + if (l != index_frontend) { /* and for all frontend except the successful one */ + dib8000_tune_restart_from_demod(state->fe[l]); + + state->fe[l]->dtv_property_cache.isdbt_sb_mode = state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode; + state->fe[l]->dtv_property_cache.inversion = state->fe[index_frontend]->dtv_property_cache.inversion; + state->fe[l]->dtv_property_cache.transmission_mode = state->fe[index_frontend]->dtv_property_cache.transmission_mode; + state->fe[l]->dtv_property_cache.guard_interval = state->fe[index_frontend]->dtv_property_cache.guard_interval; + state->fe[l]->dtv_property_cache.isdbt_partial_reception = state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception; + for (i = 0; i < 3; i++) { + state->fe[l]->dtv_property_cache.layer[i].segment_count = state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count; + state->fe[l]->dtv_property_cache.layer[i].interleaving = state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving; + state->fe[l]->dtv_property_cache.layer[i].fec = state->fe[index_frontend]->dtv_property_cache.layer[i].fec; + state->fe[l]->dtv_property_cache.layer[i].modulation = state->fe[index_frontend]->dtv_property_cache.layer[i].modulation; + } + + } + } + } + } + if (delay < callback_time) + callback_time = delay; + } + /* tuning is done when the master frontend is done (failed or success) */ + if (dib8000_get_status(state->fe[0]) == FE_STATUS_TUNE_FAILED || + dib8000_get_status(state->fe[0]) == FE_STATUS_LOCKED || + dib8000_get_status(state->fe[0]) == FE_STATUS_DATA_LOCKED) { + active = 0; + /* we need to wait for all frontends to be finished */ + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + if (dib8000_get_tune_state(state->fe[index_frontend]) != CT_DEMOD_STOP) + active = 1; + } + if (active == 0) + dprintk("tuning done with status %d", dib8000_get_status(state->fe[0])); + } + + if ((active == 1) && (callback_time == FE_CALLBACK_TIME_NEVER)) { + dprintk("strange callback time something went wrong"); + active = 0; + } + + while ((active == 1) && (systime() < callback_time)) + msleep(100); + } while (active); + + /* set output mode */ + if (state->revision != 0x8090) + dib8000_set_output_mode(state->fe[0], state->cfg.output_mode); + else { + dib8096p_set_output_mode(state->fe[0], state->cfg.output_mode); + if (state->cfg.enMpegOutput == 0) { + dib8096p_setDibTxMux(state, MPEG_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + } + } + + return ret; +} + +static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 lock_slave = 0, lock; + u8 index_frontend; + + lock = dib8000_read_lock(fe); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + lock_slave |= dib8000_read_lock(state->fe[index_frontend]); + + *stat = 0; + + if (((lock >> 13) & 1) || ((lock_slave >> 13) & 1)) + *stat |= FE_HAS_SIGNAL; + + if (((lock >> 8) & 1) || ((lock_slave >> 8) & 1)) /* Equal */ + *stat |= FE_HAS_CARRIER; + + if ((((lock >> 1) & 0xf) == 0xf) || (((lock_slave >> 1) & 0xf) == 0xf)) /* TMCC_SYNC */ + *stat |= FE_HAS_SYNC; + + if ((((lock >> 12) & 1) || ((lock_slave >> 12) & 1)) && ((lock >> 5) & 7)) /* FEC MPEG */ + *stat |= FE_HAS_LOCK; + + if (((lock >> 12) & 1) || ((lock_slave >> 12) & 1)) { + lock = dib8000_read_word(state, 554); /* Viterbi Layer A */ + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + + lock = dib8000_read_word(state, 555); /* Viterbi Layer B */ + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + + lock = dib8000_read_word(state, 556); /* Viterbi Layer C */ + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + } + + return 0; +} + +static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber) +{ + struct dib8000_state *state = fe->demodulator_priv; + + /* 13 segments */ + if (state->revision == 0x8090) + *ber = (dib8000_read_word(state, 562) << 16) | + dib8000_read_word(state, 563); + else + *ber = (dib8000_read_word(state, 560) << 16) | + dib8000_read_word(state, 561); + return 0; +} + +static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) +{ + struct dib8000_state *state = fe->demodulator_priv; + + /* packet error on 13 seg */ + if (state->revision == 0x8090) + *unc = dib8000_read_word(state, 567); + else + *unc = dib8000_read_word(state, 565); + return 0; +} + +static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend; + u16 val; + + *strength = 0; + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val); + if (val > 65535 - *strength) + *strength = 65535; + else + *strength += val; + } + + val = 65535 - dib8000_read_word(state, 390); + if (val > 65535 - *strength) + *strength = 65535; + else + *strength += val; + return 0; +} + +static u32 dib8000_get_snr(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u32 n, s, exp; + u16 val; + + if (state->revision != 0x8090) + val = dib8000_read_word(state, 542); + else + val = dib8000_read_word(state, 544); + n = (val >> 6) & 0xff; + exp = (val & 0x3f); + if ((exp & 0x20) != 0) + exp -= 0x40; + n <<= exp+16; + + if (state->revision != 0x8090) + val = dib8000_read_word(state, 543); + else + val = dib8000_read_word(state, 545); + s = (val >> 6) & 0xff; + exp = (val & 0x3f); + if ((exp & 0x20) != 0) + exp -= 0x40; + s <<= exp+16; + + if (n > 0) { + u32 t = (s/n) << 16; + return t + ((s << 16) - n*t) / n; + } + return 0xffffffff; +} + +static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend; + u32 snr_master; + + snr_master = dib8000_get_snr(fe); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + snr_master += dib8000_get_snr(state->fe[index_frontend]); + + if ((snr_master >> 16) != 0) { + snr_master = 10*intlog10(snr_master>>16); + *snr = snr_master / ((1 << 24) / 10); + } + else + *snr = 0; + + return 0; +} + +int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend = 1; + + while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL)) + index_frontend++; + if (index_frontend < MAX_NUMBER_OF_FRONTENDS) { + dprintk("set slave fe %p to index %i", fe_slave, index_frontend); + state->fe[index_frontend] = fe_slave; + return 0; + } + + dprintk("too many slave frontend"); + return -ENOMEM; +} +EXPORT_SYMBOL(dib8000_set_slave_frontend); + +int dib8000_remove_slave_frontend(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend = 1; + + while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL)) + index_frontend++; + if (index_frontend != 1) { + dprintk("remove slave fe %p (index %i)", state->fe[index_frontend-1], index_frontend-1); + state->fe[index_frontend] = NULL; + return 0; + } + + dprintk("no frontend to be removed"); + return -ENODEV; +} +EXPORT_SYMBOL(dib8000_remove_slave_frontend); + +struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index) +{ + struct dib8000_state *state = fe->demodulator_priv; + + if (slave_index >= MAX_NUMBER_OF_FRONTENDS) + return NULL; + return state->fe[slave_index]; +} +EXPORT_SYMBOL(dib8000_get_slave_frontend); + + +int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, + u8 default_addr, u8 first_addr, u8 is_dib8096p) +{ + int k = 0, ret = 0; + u8 new_addr = 0; + struct i2c_device client = {.adap = host }; + + client.i2c_write_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL); + if (!client.i2c_write_buffer) { + dprintk("%s: not enough memory", __func__); + return -ENOMEM; + } + client.i2c_read_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL); + if (!client.i2c_read_buffer) { + dprintk("%s: not enough memory", __func__); + ret = -ENOMEM; + goto error_memory_read; + } + client.i2c_buffer_lock = kzalloc(sizeof(struct mutex), GFP_KERNEL); + if (!client.i2c_buffer_lock) { + dprintk("%s: not enough memory", __func__); + ret = -ENOMEM; + goto error_memory_lock; + } + mutex_init(client.i2c_buffer_lock); + + for (k = no_of_demods - 1; k >= 0; k--) { + /* designated i2c address */ + new_addr = first_addr + (k << 1); + + client.addr = new_addr; + if (!is_dib8096p) + dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */ + if (dib8000_identify(&client) == 0) { + /* sram lead in, rdy */ + if (!is_dib8096p) + dib8000_i2c_write16(&client, 1287, 0x0003); + client.addr = default_addr; + if (dib8000_identify(&client) == 0) { + dprintk("#%d: not identified", k); + ret = -EINVAL; + goto error; + } + } + + /* start diversity to pull_down div_str - just for i2c-enumeration */ + dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6)); + + /* set new i2c address and force divstart */ + dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2); + client.addr = new_addr; + dib8000_identify(&client); + + dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr); + } + + for (k = 0; k < no_of_demods; k++) { + new_addr = first_addr | (k << 1); + client.addr = new_addr; + + // unforce divstr + dib8000_i2c_write16(&client, 1285, new_addr << 2); + + /* deactivate div - it was just for i2c-enumeration */ + dib8000_i2c_write16(&client, 1286, 0); + } + +error: + kfree(client.i2c_buffer_lock); +error_memory_lock: + kfree(client.i2c_read_buffer); +error_memory_read: + kfree(client.i2c_write_buffer); + + return ret; +} + +EXPORT_SYMBOL(dib8000_i2c_enumeration); +static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + tune->step_size = 0; + tune->max_drift = 0; + return 0; +} + +static void dib8000_release(struct dvb_frontend *fe) +{ + struct dib8000_state *st = fe->demodulator_priv; + u8 index_frontend; + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (st->fe[index_frontend] != NULL); index_frontend++) + dvb_frontend_detach(st->fe[index_frontend]); + + dibx000_exit_i2c_master(&st->i2c_master); + i2c_del_adapter(&st->dib8096p_tuner_adap); + kfree(st->fe[0]); + kfree(st); +} + +struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating) +{ + struct dib8000_state *st = fe->demodulator_priv; + return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); +} + +EXPORT_SYMBOL(dib8000_get_i2c_master); + +int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) +{ + struct dib8000_state *st = fe->demodulator_priv; + u16 val = dib8000_read_word(st, 299) & 0xffef; + val |= (onoff & 0x1) << 4; + + dprintk("pid filter enabled %d", onoff); + return dib8000_write_word(st, 299, val); +} +EXPORT_SYMBOL(dib8000_pid_filter_ctrl); + +int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +{ + struct dib8000_state *st = fe->demodulator_priv; + dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff); + return dib8000_write_word(st, 305 + id, onoff ? (1 << 13) | pid : 0); +} +EXPORT_SYMBOL(dib8000_pid_filter); + +static const struct dvb_frontend_ops dib8000_ops = { + .delsys = { SYS_ISDBT }, + .info = { + .name = "DiBcom 8000 ISDB-T", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib8000_release, + + .init = dib8000_wakeup, + .sleep = dib8000_sleep, + + .set_frontend = dib8000_set_frontend, + .get_tune_settings = dib8000_fe_get_tune_settings, + .get_frontend = dib8000_get_frontend, + + .read_status = dib8000_read_status, + .read_ber = dib8000_read_ber, + .read_signal_strength = dib8000_read_signal_strength, + .read_snr = dib8000_read_snr, + .read_ucblocks = dib8000_read_unc_blocks, +}; + +struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg) +{ + struct dvb_frontend *fe; + struct dib8000_state *state; + + dprintk("dib8000_attach"); + + state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL); + if (state == NULL) + return NULL; + fe = kzalloc(sizeof(struct dvb_frontend), GFP_KERNEL); + if (fe == NULL) + goto error; + + memcpy(&state->cfg, cfg, sizeof(struct dib8000_config)); + state->i2c.adap = i2c_adap; + state->i2c.addr = i2c_addr; + state->i2c.i2c_write_buffer = state->i2c_write_buffer; + state->i2c.i2c_read_buffer = state->i2c_read_buffer; + mutex_init(&state->i2c_buffer_lock); + state->i2c.i2c_buffer_lock = &state->i2c_buffer_lock; + state->gpio_val = cfg->gpio_val; + state->gpio_dir = cfg->gpio_dir; + + /* Ensure the output mode remains at the previous default if it's + * not specifically set by the caller. + */ + if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) + state->cfg.output_mode = OUTMODE_MPEG2_FIFO; + + state->fe[0] = fe; + fe->demodulator_priv = state; + memcpy(&state->fe[0]->ops, &dib8000_ops, sizeof(struct dvb_frontend_ops)); + + state->timf_default = cfg->pll->timf; + + if (dib8000_identify(&state->i2c) == 0) + goto error; + + dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr); + + /* init 8096p tuner adapter */ + strncpy(state->dib8096p_tuner_adap.name, "DiB8096P tuner interface", + sizeof(state->dib8096p_tuner_adap.name)); + state->dib8096p_tuner_adap.algo = &dib8096p_tuner_xfer_algo; + state->dib8096p_tuner_adap.algo_data = NULL; + state->dib8096p_tuner_adap.dev.parent = state->i2c.adap->dev.parent; + i2c_set_adapdata(&state->dib8096p_tuner_adap, state); + i2c_add_adapter(&state->dib8096p_tuner_adap); + + dib8000_reset(fe); + + dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */ + state->current_demod_bw = 6000; + + return fe; + +error: + kfree(state); + return NULL; +} + +EXPORT_SYMBOL(dib8000_attach); + +MODULE_AUTHOR("Olivier Grenie "); +MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dib8000.h b/drivers/media/dvb-frontends/dib8000.h new file mode 100644 index 00000000..b8c11e52 --- /dev/null +++ b/drivers/media/dvb-frontends/dib8000.h @@ -0,0 +1,176 @@ +#ifndef DIB8000_H +#define DIB8000_H + +#include "dibx000_common.h" + +struct dib8000_config { + u8 output_mpeg2_in_188_bytes; + u8 hostbus_diversity; + u8 tuner_is_baseband; + int (*update_lna) (struct dvb_frontend *, u16 agc_global); + + u8 agc_config_count; + struct dibx000_agc_config *agc; + struct dibx000_bandwidth_config *pll; + +#define DIB8000_GPIO_DEFAULT_DIRECTIONS 0xffff + u16 gpio_dir; +#define DIB8000_GPIO_DEFAULT_VALUES 0x0000 + u16 gpio_val; +#define DIB8000_GPIO_PWM_POS0(v) ((v & 0xf) << 12) +#define DIB8000_GPIO_PWM_POS1(v) ((v & 0xf) << 8 ) +#define DIB8000_GPIO_PWM_POS2(v) ((v & 0xf) << 4 ) +#define DIB8000_GPIO_PWM_POS3(v) (v & 0xf) +#define DIB8000_GPIO_DEFAULT_PWM_POS 0xffff + u16 gpio_pwm_pos; + u16 pwm_freq_div; + + void (*agc_control) (struct dvb_frontend *, u8 before); + + u16 drives; + u16 diversity_delay; + u8 div_cfg; + u8 output_mode; + u8 refclksel; + u8 enMpegOutput:1; + + struct dibx000_bandwidth_config *plltable; +}; + +#define DEFAULT_DIB8000_I2C_ADDRESS 18 + +#if IS_ENABLED(CONFIG_DVB_DIB8000) +extern struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg); +extern struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); + +extern int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, + u8 default_addr, u8 first_addr, u8 is_dib8096p); + +extern int dib8000_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); +extern int dib8000_set_wbd_ref(struct dvb_frontend *, u16 value); +extern int dib8000_pid_filter_ctrl(struct dvb_frontend *, u8 onoff); +extern int dib8000_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff); +extern int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state); +extern enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe); +extern void dib8000_pwm_agc_reset(struct dvb_frontend *fe); +extern s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode); +extern struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe); +extern int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff); +extern int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ); +extern u32 dib8000_ctrl_timf(struct dvb_frontend *fe, + uint8_t op, uint32_t timf); +extern int dib8000_update_pll(struct dvb_frontend *fe, + struct dibx000_bandwidth_config *pll, u32 bw, u8 ratio); +extern int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave); +extern int dib8000_remove_slave_frontend(struct dvb_frontend *fe); +extern struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index); +#else +static inline struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface i, int x) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline int dib8000_i2c_enumeration(struct i2c_adapter *host, + int no_of_demods, u8 default_addr, u8 first_addr, + u8 is_dib8096p) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +static inline int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return CT_SHUTDOWN; +} +static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} +static inline struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static inline int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} +static inline s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} +static inline int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} +static inline u32 dib8000_ctrl_timf(struct dvb_frontend *fe, + uint8_t op, uint32_t timf) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} +static inline int dib8000_update_pll(struct dvb_frontend *fe, + struct dibx000_bandwidth_config *pll, u32 bw, u8 ratio) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +static inline int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +int dib8000_remove_slave_frontend(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/dib9000.c b/drivers/media/dvb-frontends/dib9000.c new file mode 100644 index 00000000..6201c59a --- /dev/null +++ b/drivers/media/dvb-frontends/dib9000.c @@ -0,0 +1,2590 @@ +/* + * Linux-DVB Driver for DiBcom's DiB9000 and demodulator-family. + * + * Copyright (C) 2005-10 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#include +#include +#include + +#include "dvb_math.h" +#include "dvb_frontend.h" + +#include "dib9000.h" +#include "dibx000_common.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB9000: "); printk(args); printk("\n"); } } while (0) +#define MAX_NUMBER_OF_FRONTENDS 6 + +struct i2c_device { + struct i2c_adapter *i2c_adap; + u8 i2c_addr; + u8 *i2c_read_buffer; + u8 *i2c_write_buffer; +}; + +struct dib9000_pid_ctrl { +#define DIB9000_PID_FILTER_CTRL 0 +#define DIB9000_PID_FILTER 1 + u8 cmd; + u8 id; + u16 pid; + u8 onoff; +}; + +struct dib9000_state { + struct i2c_device i2c; + + struct dibx000_i2c_master i2c_master; + struct i2c_adapter tuner_adap; + struct i2c_adapter component_bus; + + u16 revision; + u8 reg_offs; + + enum frontend_tune_state tune_state; + u32 status; + struct dvb_frontend_parametersContext channel_status; + + u8 fe_id; + +#define DIB9000_GPIO_DEFAULT_DIRECTIONS 0xffff + u16 gpio_dir; +#define DIB9000_GPIO_DEFAULT_VALUES 0x0000 + u16 gpio_val; +#define DIB9000_GPIO_DEFAULT_PWM_POS 0xffff + u16 gpio_pwm_pos; + + union { /* common for all chips */ + struct { + u8 mobile_mode:1; + } host; + + struct { + struct dib9000_fe_memory_map { + u16 addr; + u16 size; + } fe_mm[18]; + u8 memcmd; + + struct mutex mbx_if_lock; /* to protect read/write operations */ + struct mutex mbx_lock; /* to protect the whole mailbox handling */ + + struct mutex mem_lock; /* to protect the memory accesses */ + struct mutex mem_mbx_lock; /* to protect the memory-based mailbox */ + +#define MBX_MAX_WORDS (256 - 200 - 2) +#define DIB9000_MSG_CACHE_SIZE 2 + u16 message_cache[DIB9000_MSG_CACHE_SIZE][MBX_MAX_WORDS]; + u8 fw_is_running; + } risc; + } platform; + + union { /* common for all platforms */ + struct { + struct dib9000_config cfg; + } d9; + } chip; + + struct dvb_frontend *fe[MAX_NUMBER_OF_FRONTENDS]; + u16 component_bus_speed; + + /* for the I2C transfer */ + struct i2c_msg msg[2]; + u8 i2c_write_buffer[255]; + u8 i2c_read_buffer[255]; + struct mutex demod_lock; + u8 get_frontend_internal; + struct dib9000_pid_ctrl pid_ctrl[10]; + s8 pid_ctrl_index; /* -1: empty list; -2: do not use the list */ +}; + +static const u32 fe_info[44] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +enum dib9000_power_mode { + DIB9000_POWER_ALL = 0, + + DIB9000_POWER_NO, + DIB9000_POWER_INTERF_ANALOG_AGC, + DIB9000_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD, + DIB9000_POWER_COR4_CRY_ESRAM_MOUT_NUD, + DIB9000_POWER_INTERFACE_ONLY, +}; + +enum dib9000_out_messages { + OUT_MSG_HBM_ACK, + OUT_MSG_HOST_BUF_FAIL, + OUT_MSG_REQ_VERSION, + OUT_MSG_BRIDGE_I2C_W, + OUT_MSG_BRIDGE_I2C_R, + OUT_MSG_BRIDGE_APB_W, + OUT_MSG_BRIDGE_APB_R, + OUT_MSG_SCAN_CHANNEL, + OUT_MSG_MONIT_DEMOD, + OUT_MSG_CONF_GPIO, + OUT_MSG_DEBUG_HELP, + OUT_MSG_SUBBAND_SEL, + OUT_MSG_ENABLE_TIME_SLICE, + OUT_MSG_FE_FW_DL, + OUT_MSG_FE_CHANNEL_SEARCH, + OUT_MSG_FE_CHANNEL_TUNE, + OUT_MSG_FE_SLEEP, + OUT_MSG_FE_SYNC, + OUT_MSG_CTL_MONIT, + + OUT_MSG_CONF_SVC, + OUT_MSG_SET_HBM, + OUT_MSG_INIT_DEMOD, + OUT_MSG_ENABLE_DIVERSITY, + OUT_MSG_SET_OUTPUT_MODE, + OUT_MSG_SET_PRIORITARY_CHANNEL, + OUT_MSG_ACK_FRG, + OUT_MSG_INIT_PMU, +}; + +enum dib9000_in_messages { + IN_MSG_DATA, + IN_MSG_FRAME_INFO, + IN_MSG_CTL_MONIT, + IN_MSG_ACK_FREE_ITEM, + IN_MSG_DEBUG_BUF, + IN_MSG_MPE_MONITOR, + IN_MSG_RAWTS_MONITOR, + IN_MSG_END_BRIDGE_I2C_RW, + IN_MSG_END_BRIDGE_APB_RW, + IN_MSG_VERSION, + IN_MSG_END_OF_SCAN, + IN_MSG_MONIT_DEMOD, + IN_MSG_ERROR, + IN_MSG_FE_FW_DL_DONE, + IN_MSG_EVENT, + IN_MSG_ACK_CHANGE_SVC, + IN_MSG_HBM_PROF, +}; + +/* memory_access requests */ +#define FE_MM_W_CHANNEL 0 +#define FE_MM_W_FE_INFO 1 +#define FE_MM_RW_SYNC 2 + +#define FE_SYNC_CHANNEL 1 +#define FE_SYNC_W_GENERIC_MONIT 2 +#define FE_SYNC_COMPONENT_ACCESS 3 + +#define FE_MM_R_CHANNEL_SEARCH_STATE 3 +#define FE_MM_R_CHANNEL_UNION_CONTEXT 4 +#define FE_MM_R_FE_INFO 5 +#define FE_MM_R_FE_MONITOR 6 + +#define FE_MM_W_CHANNEL_HEAD 7 +#define FE_MM_W_CHANNEL_UNION 8 +#define FE_MM_W_CHANNEL_CONTEXT 9 +#define FE_MM_R_CHANNEL_UNION 10 +#define FE_MM_R_CHANNEL_CONTEXT 11 +#define FE_MM_R_CHANNEL_TUNE_STATE 12 + +#define FE_MM_R_GENERIC_MONITORING_SIZE 13 +#define FE_MM_W_GENERIC_MONITORING 14 +#define FE_MM_R_GENERIC_MONITORING 15 + +#define FE_MM_W_COMPONENT_ACCESS 16 +#define FE_MM_RW_COMPONENT_ACCESS_BUFFER 17 +static int dib9000_risc_apb_access_read(struct dib9000_state *state, u32 address, u16 attribute, const u8 * tx, u32 txlen, u8 * b, u32 len); +static int dib9000_risc_apb_access_write(struct dib9000_state *state, u32 address, u16 attribute, const u8 * b, u32 len); + +static u16 to_fw_output_mode(u16 mode) +{ + switch (mode) { + case OUTMODE_HIGH_Z: + return 0; + case OUTMODE_MPEG2_PAR_GATED_CLK: + return 4; + case OUTMODE_MPEG2_PAR_CONT_CLK: + return 8; + case OUTMODE_MPEG2_SERIAL: + return 16; + case OUTMODE_DIVERSITY: + return 128; + case OUTMODE_MPEG2_FIFO: + return 2; + case OUTMODE_ANALOG_ADC: + return 1; + default: + return 0; + } +} + +static u16 dib9000_read16_attr(struct dib9000_state *state, u16 reg, u8 * b, u32 len, u16 attribute) +{ + u32 chunk_size = 126; + u32 l; + int ret; + + if (state->platform.risc.fw_is_running && (reg < 1024)) + return dib9000_risc_apb_access_read(state, reg, attribute, NULL, 0, b, len); + + memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c.i2c_addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 2; + state->msg[1].addr = state->i2c.i2c_addr >> 1; + state->msg[1].flags = I2C_M_RD; + state->msg[1].buf = b; + state->msg[1].len = len; + + state->i2c_write_buffer[0] = reg >> 8; + state->i2c_write_buffer[1] = reg & 0xff; + + if (attribute & DATA_BUS_ACCESS_MODE_8BIT) + state->i2c_write_buffer[0] |= (1 << 5); + if (attribute & DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT) + state->i2c_write_buffer[0] |= (1 << 4); + + do { + l = len < chunk_size ? len : chunk_size; + state->msg[1].len = l; + state->msg[1].buf = b; + ret = i2c_transfer(state->i2c.i2c_adap, state->msg, 2) != 2 ? -EREMOTEIO : 0; + if (ret != 0) { + dprintk("i2c read error on %d", reg); + return -EREMOTEIO; + } + + b += l; + len -= l; + + if (!(attribute & DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT)) + reg += l / 2; + } while ((ret == 0) && len); + + return 0; +} + +static u16 dib9000_i2c_read16(struct i2c_device *i2c, u16 reg) +{ + struct i2c_msg msg[2] = { + {.addr = i2c->i2c_addr >> 1, .flags = 0, + .buf = i2c->i2c_write_buffer, .len = 2}, + {.addr = i2c->i2c_addr >> 1, .flags = I2C_M_RD, + .buf = i2c->i2c_read_buffer, .len = 2}, + }; + + i2c->i2c_write_buffer[0] = reg >> 8; + i2c->i2c_write_buffer[1] = reg & 0xff; + + if (i2c_transfer(i2c->i2c_adap, msg, 2) != 2) { + dprintk("read register %x error", reg); + return 0; + } + + return (i2c->i2c_read_buffer[0] << 8) | i2c->i2c_read_buffer[1]; +} + +static inline u16 dib9000_read_word(struct dib9000_state *state, u16 reg) +{ + if (dib9000_read16_attr(state, reg, state->i2c_read_buffer, 2, 0) != 0) + return 0; + return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1]; +} + +static inline u16 dib9000_read_word_attr(struct dib9000_state *state, u16 reg, u16 attribute) +{ + if (dib9000_read16_attr(state, reg, state->i2c_read_buffer, 2, + attribute) != 0) + return 0; + return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1]; +} + +#define dib9000_read16_noinc_attr(state, reg, b, len, attribute) dib9000_read16_attr(state, reg, b, len, (attribute) | DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT) + +static u16 dib9000_write16_attr(struct dib9000_state *state, u16 reg, const u8 * buf, u32 len, u16 attribute) +{ + u32 chunk_size = 126; + u32 l; + int ret; + + if (state->platform.risc.fw_is_running && (reg < 1024)) { + if (dib9000_risc_apb_access_write + (state, reg, DATA_BUS_ACCESS_MODE_16BIT | DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT | attribute, buf, len) != 0) + return -EINVAL; + return 0; + } + + memset(&state->msg[0], 0, sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c.i2c_addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = len + 2; + + state->i2c_write_buffer[0] = (reg >> 8) & 0xff; + state->i2c_write_buffer[1] = (reg) & 0xff; + + if (attribute & DATA_BUS_ACCESS_MODE_8BIT) + state->i2c_write_buffer[0] |= (1 << 5); + if (attribute & DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT) + state->i2c_write_buffer[0] |= (1 << 4); + + do { + l = len < chunk_size ? len : chunk_size; + state->msg[0].len = l + 2; + memcpy(&state->i2c_write_buffer[2], buf, l); + + ret = i2c_transfer(state->i2c.i2c_adap, state->msg, 1) != 1 ? -EREMOTEIO : 0; + + buf += l; + len -= l; + + if (!(attribute & DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT)) + reg += l / 2; + } while ((ret == 0) && len); + + return ret; +} + +static int dib9000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val) +{ + struct i2c_msg msg = { + .addr = i2c->i2c_addr >> 1, .flags = 0, + .buf = i2c->i2c_write_buffer, .len = 4 + }; + + i2c->i2c_write_buffer[0] = (reg >> 8) & 0xff; + i2c->i2c_write_buffer[1] = reg & 0xff; + i2c->i2c_write_buffer[2] = (val >> 8) & 0xff; + i2c->i2c_write_buffer[3] = val & 0xff; + + return i2c_transfer(i2c->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0; +} + +static inline int dib9000_write_word(struct dib9000_state *state, u16 reg, u16 val) +{ + u8 b[2] = { val >> 8, val & 0xff }; + return dib9000_write16_attr(state, reg, b, 2, 0); +} + +static inline int dib9000_write_word_attr(struct dib9000_state *state, u16 reg, u16 val, u16 attribute) +{ + u8 b[2] = { val >> 8, val & 0xff }; + return dib9000_write16_attr(state, reg, b, 2, attribute); +} + +#define dib9000_write(state, reg, buf, len) dib9000_write16_attr(state, reg, buf, len, 0) +#define dib9000_write16_noinc(state, reg, buf, len) dib9000_write16_attr(state, reg, buf, len, DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT) +#define dib9000_write16_noinc_attr(state, reg, buf, len, attribute) dib9000_write16_attr(state, reg, buf, len, DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT | (attribute)) + +#define dib9000_mbx_send(state, id, data, len) dib9000_mbx_send_attr(state, id, data, len, 0) +#define dib9000_mbx_get_message(state, id, msg, len) dib9000_mbx_get_message_attr(state, id, msg, len, 0) + +#define MAC_IRQ (1 << 1) +#define IRQ_POL_MSK (1 << 4) + +#define dib9000_risc_mem_read_chunks(state, b, len) dib9000_read16_attr(state, 1063, b, len, DATA_BUS_ACCESS_MODE_8BIT | DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT) +#define dib9000_risc_mem_write_chunks(state, buf, len) dib9000_write16_attr(state, 1063, buf, len, DATA_BUS_ACCESS_MODE_8BIT | DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT) + +static void dib9000_risc_mem_setup_cmd(struct dib9000_state *state, u32 addr, u32 len, u8 reading) +{ + u8 b[14] = { 0 }; + +/* dprintk("%d memcmd: %d %d %d\n", state->fe_id, addr, addr+len, len); */ +/* b[0] = 0 << 7; */ + b[1] = 1; + +/* b[2] = 0; */ +/* b[3] = 0; */ + b[4] = (u8) (addr >> 8); + b[5] = (u8) (addr & 0xff); + +/* b[10] = 0; */ +/* b[11] = 0; */ + b[12] = (u8) (addr >> 8); + b[13] = (u8) (addr & 0xff); + + addr += len; +/* b[6] = 0; */ +/* b[7] = 0; */ + b[8] = (u8) (addr >> 8); + b[9] = (u8) (addr & 0xff); + + dib9000_write(state, 1056, b, 14); + if (reading) + dib9000_write_word(state, 1056, (1 << 15) | 1); + state->platform.risc.memcmd = -1; /* if it was called directly reset it - to force a future setup-call to set it */ +} + +static void dib9000_risc_mem_setup(struct dib9000_state *state, u8 cmd) +{ + struct dib9000_fe_memory_map *m = &state->platform.risc.fe_mm[cmd & 0x7f]; + /* decide whether we need to "refresh" the memory controller */ + if (state->platform.risc.memcmd == cmd && /* same command */ + !(cmd & 0x80 && m->size < 67)) /* and we do not want to read something with less than 67 bytes looping - working around a bug in the memory controller */ + return; + dib9000_risc_mem_setup_cmd(state, m->addr, m->size, cmd & 0x80); + state->platform.risc.memcmd = cmd; +} + +static int dib9000_risc_mem_read(struct dib9000_state *state, u8 cmd, u8 * b, u16 len) +{ + if (!state->platform.risc.fw_is_running) + return -EIO; + + if (mutex_lock_interruptible(&state->platform.risc.mem_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + dib9000_risc_mem_setup(state, cmd | 0x80); + dib9000_risc_mem_read_chunks(state, b, len); + mutex_unlock(&state->platform.risc.mem_lock); + return 0; +} + +static int dib9000_risc_mem_write(struct dib9000_state *state, u8 cmd, const u8 * b) +{ + struct dib9000_fe_memory_map *m = &state->platform.risc.fe_mm[cmd]; + if (!state->platform.risc.fw_is_running) + return -EIO; + + if (mutex_lock_interruptible(&state->platform.risc.mem_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + dib9000_risc_mem_setup(state, cmd); + dib9000_risc_mem_write_chunks(state, b, m->size); + mutex_unlock(&state->platform.risc.mem_lock); + return 0; +} + +static int dib9000_firmware_download(struct dib9000_state *state, u8 risc_id, u16 key, const u8 * code, u32 len) +{ + u16 offs; + + if (risc_id == 1) + offs = 16; + else + offs = 0; + + /* config crtl reg */ + dib9000_write_word(state, 1024 + offs, 0x000f); + dib9000_write_word(state, 1025 + offs, 0); + dib9000_write_word(state, 1031 + offs, key); + + dprintk("going to download %dB of microcode", len); + if (dib9000_write16_noinc(state, 1026 + offs, (u8 *) code, (u16) len) != 0) { + dprintk("error while downloading microcode for RISC %c", 'A' + risc_id); + return -EIO; + } + + dprintk("Microcode for RISC %c loaded", 'A' + risc_id); + + return 0; +} + +static int dib9000_mbx_host_init(struct dib9000_state *state, u8 risc_id) +{ + u16 mbox_offs; + u16 reset_reg; + u16 tries = 1000; + + if (risc_id == 1) + mbox_offs = 16; + else + mbox_offs = 0; + + /* Reset mailbox */ + dib9000_write_word(state, 1027 + mbox_offs, 0x8000); + + /* Read reset status */ + do { + reset_reg = dib9000_read_word(state, 1027 + mbox_offs); + msleep(100); + } while ((reset_reg & 0x8000) && --tries); + + if (reset_reg & 0x8000) { + dprintk("MBX: init ERROR, no response from RISC %c", 'A' + risc_id); + return -EIO; + } + dprintk("MBX: initialized"); + return 0; +} + +#define MAX_MAILBOX_TRY 100 +static int dib9000_mbx_send_attr(struct dib9000_state *state, u8 id, u16 * data, u8 len, u16 attr) +{ + u8 *d, b[2]; + u16 tmp; + u16 size; + u32 i; + int ret = 0; + + if (!state->platform.risc.fw_is_running) + return -EINVAL; + + if (mutex_lock_interruptible(&state->platform.risc.mbx_if_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + tmp = MAX_MAILBOX_TRY; + do { + size = dib9000_read_word_attr(state, 1043, attr) & 0xff; + if ((size + len + 1) > MBX_MAX_WORDS && --tmp) { + dprintk("MBX: RISC mbx full, retrying"); + msleep(100); + } else + break; + } while (1); + + /*dprintk( "MBX: size: %d", size); */ + + if (tmp == 0) { + ret = -EINVAL; + goto out; + } +#ifdef DUMP_MSG + dprintk("--> %02x %d ", id, len + 1); + for (i = 0; i < len; i++) + dprintk("%04x ", data[i]); + dprintk("\n"); +#endif + + /* byte-order conversion - works on big (where it is not necessary) or little endian */ + d = (u8 *) data; + for (i = 0; i < len; i++) { + tmp = data[i]; + *d++ = tmp >> 8; + *d++ = tmp & 0xff; + } + + /* write msg */ + b[0] = id; + b[1] = len + 1; + if (dib9000_write16_noinc_attr(state, 1045, b, 2, attr) != 0 || dib9000_write16_noinc_attr(state, 1045, (u8 *) data, len * 2, attr) != 0) { + ret = -EIO; + goto out; + } + + /* update register nb_mes_in_RX */ + ret = (u8) dib9000_write_word_attr(state, 1043, 1 << 14, attr); + +out: + mutex_unlock(&state->platform.risc.mbx_if_lock); + + return ret; +} + +static u8 dib9000_mbx_read(struct dib9000_state *state, u16 * data, u8 risc_id, u16 attr) +{ +#ifdef DUMP_MSG + u16 *d = data; +#endif + + u16 tmp, i; + u8 size; + u8 mc_base; + + if (!state->platform.risc.fw_is_running) + return 0; + + if (mutex_lock_interruptible(&state->platform.risc.mbx_if_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } + if (risc_id == 1) + mc_base = 16; + else + mc_base = 0; + + /* Length and type in the first word */ + *data = dib9000_read_word_attr(state, 1029 + mc_base, attr); + + size = *data & 0xff; + if (size <= MBX_MAX_WORDS) { + data++; + size--; /* Initial word already read */ + + dib9000_read16_noinc_attr(state, 1029 + mc_base, (u8 *) data, size * 2, attr); + + /* to word conversion */ + for (i = 0; i < size; i++) { + tmp = *data; + *data = (tmp >> 8) | (tmp << 8); + data++; + } + +#ifdef DUMP_MSG + dprintk("<-- "); + for (i = 0; i < size + 1; i++) + dprintk("%04x ", d[i]); + dprintk("\n"); +#endif + } else { + dprintk("MBX: message is too big for message cache (%d), flushing message", size); + size--; /* Initial word already read */ + while (size--) + dib9000_read16_noinc_attr(state, 1029 + mc_base, (u8 *) data, 2, attr); + } + /* Update register nb_mes_in_TX */ + dib9000_write_word_attr(state, 1028 + mc_base, 1 << 14, attr); + + mutex_unlock(&state->platform.risc.mbx_if_lock); + + return size + 1; +} + +static int dib9000_risc_debug_buf(struct dib9000_state *state, u16 * data, u8 size) +{ + u32 ts = data[1] << 16 | data[0]; + char *b = (char *)&data[2]; + + b[2 * (size - 2) - 1] = '\0'; /* Bullet proof the buffer */ + if (*b == '~') { + b++; + dprintk(b); + } else + dprintk("RISC%d: %d.%04d %s", state->fe_id, ts / 10000, ts % 10000, *b ? b : ""); + return 1; +} + +static int dib9000_mbx_fetch_to_cache(struct dib9000_state *state, u16 attr) +{ + int i; + u8 size; + u16 *block; + /* find a free slot */ + for (i = 0; i < DIB9000_MSG_CACHE_SIZE; i++) { + block = state->platform.risc.message_cache[i]; + if (*block == 0) { + size = dib9000_mbx_read(state, block, 1, attr); + +/* dprintk( "MBX: fetched %04x message to cache", *block); */ + + switch (*block >> 8) { + case IN_MSG_DEBUG_BUF: + dib9000_risc_debug_buf(state, block + 1, size); /* debug-messages are going to be printed right away */ + *block = 0; /* free the block */ + break; +#if 0 + case IN_MSG_DATA: /* FE-TRACE */ + dib9000_risc_data_process(state, block + 1, size); + *block = 0; + break; +#endif + default: + break; + } + + return 1; + } + } + dprintk("MBX: no free cache-slot found for new message..."); + return -1; +} + +static u8 dib9000_mbx_count(struct dib9000_state *state, u8 risc_id, u16 attr) +{ + if (risc_id == 0) + return (u8) (dib9000_read_word_attr(state, 1028, attr) >> 10) & 0x1f; /* 5 bit field */ + else + return (u8) (dib9000_read_word_attr(state, 1044, attr) >> 8) & 0x7f; /* 7 bit field */ +} + +static int dib9000_mbx_process(struct dib9000_state *state, u16 attr) +{ + int ret = 0; + + if (!state->platform.risc.fw_is_running) + return -1; + + if (mutex_lock_interruptible(&state->platform.risc.mbx_lock) < 0) { + dprintk("could not get the lock"); + return -1; + } + + if (dib9000_mbx_count(state, 1, attr)) /* 1=RiscB */ + ret = dib9000_mbx_fetch_to_cache(state, attr); + + dib9000_read_word_attr(state, 1229, attr); /* Clear the IRQ */ +/* if (tmp) */ +/* dprintk( "cleared IRQ: %x", tmp); */ + mutex_unlock(&state->platform.risc.mbx_lock); + + return ret; +} + +static int dib9000_mbx_get_message_attr(struct dib9000_state *state, u16 id, u16 * msg, u8 * size, u16 attr) +{ + u8 i; + u16 *block; + u16 timeout = 30; + + *msg = 0; + do { + /* dib9000_mbx_get_from_cache(); */ + for (i = 0; i < DIB9000_MSG_CACHE_SIZE; i++) { + block = state->platform.risc.message_cache[i]; + if ((*block >> 8) == id) { + *size = (*block & 0xff) - 1; + memcpy(msg, block + 1, (*size) * 2); + *block = 0; /* free the block */ + i = 0; /* signal that we found a message */ + break; + } + } + + if (i == 0) + break; + + if (dib9000_mbx_process(state, attr) == -1) /* try to fetch one message - if any */ + return -1; + + } while (--timeout); + + if (timeout == 0) { + dprintk("waiting for message %d timed out", id); + return -1; + } + + return i == 0; +} + +static int dib9000_risc_check_version(struct dib9000_state *state) +{ + u8 r[4]; + u8 size; + u16 fw_version = 0; + + if (dib9000_mbx_send(state, OUT_MSG_REQ_VERSION, &fw_version, 1) != 0) + return -EIO; + + if (dib9000_mbx_get_message(state, IN_MSG_VERSION, (u16 *) r, &size) < 0) + return -EIO; + + fw_version = (r[0] << 8) | r[1]; + dprintk("RISC: ver: %d.%02d (IC: %d)", fw_version >> 10, fw_version & 0x3ff, (r[2] << 8) | r[3]); + + if ((fw_version >> 10) != 7) + return -EINVAL; + + switch (fw_version & 0x3ff) { + case 11: + case 12: + case 14: + case 15: + case 16: + case 17: + break; + default: + dprintk("RISC: invalid firmware version"); + return -EINVAL; + } + + dprintk("RISC: valid firmware version"); + return 0; +} + +static int dib9000_fw_boot(struct dib9000_state *state, const u8 * codeA, u32 lenA, const u8 * codeB, u32 lenB) +{ + /* Reconfig pool mac ram */ + dib9000_write_word(state, 1225, 0x02); /* A: 8k C, 4 k D - B: 32k C 6 k D - IRAM 96k */ + dib9000_write_word(state, 1226, 0x05); + + /* Toggles IP crypto to Host APB interface. */ + dib9000_write_word(state, 1542, 1); + + /* Set jump and no jump in the dma box */ + dib9000_write_word(state, 1074, 0); + dib9000_write_word(state, 1075, 0); + + /* Set MAC as APB Master. */ + dib9000_write_word(state, 1237, 0); + + /* Reset the RISCs */ + if (codeA != NULL) + dib9000_write_word(state, 1024, 2); + else + dib9000_write_word(state, 1024, 15); + if (codeB != NULL) + dib9000_write_word(state, 1040, 2); + + if (codeA != NULL) + dib9000_firmware_download(state, 0, 0x1234, codeA, lenA); + if (codeB != NULL) + dib9000_firmware_download(state, 1, 0x1234, codeB, lenB); + + /* Run the RISCs */ + if (codeA != NULL) + dib9000_write_word(state, 1024, 0); + if (codeB != NULL) + dib9000_write_word(state, 1040, 0); + + if (codeA != NULL) + if (dib9000_mbx_host_init(state, 0) != 0) + return -EIO; + if (codeB != NULL) + if (dib9000_mbx_host_init(state, 1) != 0) + return -EIO; + + msleep(100); + state->platform.risc.fw_is_running = 1; + + if (dib9000_risc_check_version(state) != 0) + return -EINVAL; + + state->platform.risc.memcmd = 0xff; + return 0; +} + +static u16 dib9000_identify(struct i2c_device *client) +{ + u16 value; + + value = dib9000_i2c_read16(client, 896); + if (value != 0x01b3) { + dprintk("wrong Vendor ID (0x%x)", value); + return 0; + } + + value = dib9000_i2c_read16(client, 897); + if (value != 0x4000 && value != 0x4001 && value != 0x4002 && value != 0x4003 && value != 0x4004 && value != 0x4005) { + dprintk("wrong Device ID (0x%x)", value); + return 0; + } + + /* protect this driver to be used with 7000PC */ + if (value == 0x4000 && dib9000_i2c_read16(client, 769) == 0x4000) { + dprintk("this driver does not work with DiB7000PC"); + return 0; + } + + switch (value) { + case 0x4000: + dprintk("found DiB7000MA/PA/MB/PB"); + break; + case 0x4001: + dprintk("found DiB7000HC"); + break; + case 0x4002: + dprintk("found DiB7000MC"); + break; + case 0x4003: + dprintk("found DiB9000A"); + break; + case 0x4004: + dprintk("found DiB9000H"); + break; + case 0x4005: + dprintk("found DiB9000M"); + break; + } + + return value; +} + +static void dib9000_set_power_mode(struct dib9000_state *state, enum dib9000_power_mode mode) +{ + /* by default everything is going to be powered off */ + u16 reg_903 = 0x3fff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906; + u8 offset; + + if (state->revision == 0x4003 || state->revision == 0x4004 || state->revision == 0x4005) + offset = 1; + else + offset = 0; + + reg_906 = dib9000_read_word(state, 906 + offset) | 0x3; /* keep settings for RISC */ + + /* now, depending on the requested mode, we power on */ + switch (mode) { + /* power up everything in the demod */ + case DIB9000_POWER_ALL: + reg_903 = 0x0000; + reg_904 = 0x0000; + reg_905 = 0x0000; + reg_906 = 0x0000; + break; + + /* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */ + case DIB9000_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C or SRAM */ + reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)); + break; + + case DIB9000_POWER_INTERF_ANALOG_AGC: + reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10)); + reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2)); + reg_906 &= ~((1 << 0)); + break; + + case DIB9000_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD: + reg_903 = 0x0000; + reg_904 = 0x801f; + reg_905 = 0x0000; + reg_906 &= ~((1 << 0)); + break; + + case DIB9000_POWER_COR4_CRY_ESRAM_MOUT_NUD: + reg_903 = 0x0000; + reg_904 = 0x8000; + reg_905 = 0x010b; + reg_906 &= ~((1 << 0)); + break; + default: + case DIB9000_POWER_NO: + break; + } + + /* always power down unused parts */ + if (!state->platform.host.mobile_mode) + reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1); + + /* P_sdio_select_clk = 0 on MC and after */ + if (state->revision != 0x4000) + reg_906 <<= 1; + + dib9000_write_word(state, 903 + offset, reg_903); + dib9000_write_word(state, 904 + offset, reg_904); + dib9000_write_word(state, 905 + offset, reg_905); + dib9000_write_word(state, 906 + offset, reg_906); +} + +static int dib9000_fw_reset(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + + dib9000_write_word(state, 1817, 0x0003); + + dib9000_write_word(state, 1227, 1); + dib9000_write_word(state, 1227, 0); + + switch ((state->revision = dib9000_identify(&state->i2c))) { + case 0x4003: + case 0x4004: + case 0x4005: + state->reg_offs = 1; + break; + default: + return -EINVAL; + } + + /* reset the i2c-master to use the host interface */ + dibx000_reset_i2c_master(&state->i2c_master); + + dib9000_set_power_mode(state, DIB9000_POWER_ALL); + + /* unforce divstr regardless whether i2c enumeration was done or not */ + dib9000_write_word(state, 1794, dib9000_read_word(state, 1794) & ~(1 << 1)); + dib9000_write_word(state, 1796, 0); + dib9000_write_word(state, 1805, 0x805); + + /* restart all parts */ + dib9000_write_word(state, 898, 0xffff); + dib9000_write_word(state, 899, 0xffff); + dib9000_write_word(state, 900, 0x0001); + dib9000_write_word(state, 901, 0xff19); + dib9000_write_word(state, 902, 0x003c); + + dib9000_write_word(state, 898, 0); + dib9000_write_word(state, 899, 0); + dib9000_write_word(state, 900, 0); + dib9000_write_word(state, 901, 0); + dib9000_write_word(state, 902, 0); + + dib9000_write_word(state, 911, state->chip.d9.cfg.if_drives); + + dib9000_set_power_mode(state, DIB9000_POWER_INTERFACE_ONLY); + + return 0; +} + +static int dib9000_risc_apb_access_read(struct dib9000_state *state, u32 address, u16 attribute, const u8 * tx, u32 txlen, u8 * b, u32 len) +{ + u16 mb[10]; + u8 i, s; + + if (address >= 1024 || !state->platform.risc.fw_is_running) + return -EINVAL; + + /* dprintk( "APB access thru rd fw %d %x", address, attribute); */ + + mb[0] = (u16) address; + mb[1] = len / 2; + dib9000_mbx_send_attr(state, OUT_MSG_BRIDGE_APB_R, mb, 2, attribute); + switch (dib9000_mbx_get_message_attr(state, IN_MSG_END_BRIDGE_APB_RW, mb, &s, attribute)) { + case 1: + s--; + for (i = 0; i < s; i++) { + b[i * 2] = (mb[i + 1] >> 8) & 0xff; + b[i * 2 + 1] = (mb[i + 1]) & 0xff; + } + return 0; + default: + return -EIO; + } + return -EIO; +} + +static int dib9000_risc_apb_access_write(struct dib9000_state *state, u32 address, u16 attribute, const u8 * b, u32 len) +{ + u16 mb[10]; + u8 s, i; + + if (address >= 1024 || !state->platform.risc.fw_is_running) + return -EINVAL; + + /* dprintk( "APB access thru wr fw %d %x", address, attribute); */ + + mb[0] = (unsigned short)address; + for (i = 0; i < len && i < 20; i += 2) + mb[1 + (i / 2)] = (b[i] << 8 | b[i + 1]); + + dib9000_mbx_send_attr(state, OUT_MSG_BRIDGE_APB_W, mb, 1 + len / 2, attribute); + return dib9000_mbx_get_message_attr(state, IN_MSG_END_BRIDGE_APB_RW, mb, &s, attribute) == 1 ? 0 : -EINVAL; +} + +static int dib9000_fw_memmbx_sync(struct dib9000_state *state, u8 i) +{ + u8 index_loop = 10; + + if (!state->platform.risc.fw_is_running) + return 0; + dib9000_risc_mem_write(state, FE_MM_RW_SYNC, &i); + do { + dib9000_risc_mem_read(state, FE_MM_RW_SYNC, state->i2c_read_buffer, 1); + } while (state->i2c_read_buffer[0] && index_loop--); + + if (index_loop > 0) + return 0; + return -EIO; +} + +static int dib9000_fw_init(struct dib9000_state *state) +{ + struct dibGPIOFunction *f; + u16 b[40] = { 0 }; + u8 i; + u8 size; + + if (dib9000_fw_boot(state, NULL, 0, state->chip.d9.cfg.microcode_B_fe_buffer, state->chip.d9.cfg.microcode_B_fe_size) != 0) + return -EIO; + + /* initialize the firmware */ + for (i = 0; i < ARRAY_SIZE(state->chip.d9.cfg.gpio_function); i++) { + f = &state->chip.d9.cfg.gpio_function[i]; + if (f->mask) { + switch (f->function) { + case BOARD_GPIO_FUNCTION_COMPONENT_ON: + b[0] = (u16) f->mask; + b[1] = (u16) f->direction; + b[2] = (u16) f->value; + break; + case BOARD_GPIO_FUNCTION_COMPONENT_OFF: + b[3] = (u16) f->mask; + b[4] = (u16) f->direction; + b[5] = (u16) f->value; + break; + } + } + } + if (dib9000_mbx_send(state, OUT_MSG_CONF_GPIO, b, 15) != 0) + return -EIO; + + /* subband */ + b[0] = state->chip.d9.cfg.subband.size; /* type == 0 -> GPIO - PWM not yet supported */ + for (i = 0; i < state->chip.d9.cfg.subband.size; i++) { + b[1 + i * 4] = state->chip.d9.cfg.subband.subband[i].f_mhz; + b[2 + i * 4] = (u16) state->chip.d9.cfg.subband.subband[i].gpio.mask; + b[3 + i * 4] = (u16) state->chip.d9.cfg.subband.subband[i].gpio.direction; + b[4 + i * 4] = (u16) state->chip.d9.cfg.subband.subband[i].gpio.value; + } + b[1 + i * 4] = 0; /* fe_id */ + if (dib9000_mbx_send(state, OUT_MSG_SUBBAND_SEL, b, 2 + 4 * i) != 0) + return -EIO; + + /* 0 - id, 1 - no_of_frontends */ + b[0] = (0 << 8) | 1; + /* 0 = i2c-address demod, 0 = tuner */ + b[1] = (0 << 8) | (0); + b[2] = (u16) (((state->chip.d9.cfg.xtal_clock_khz * 1000) >> 16) & 0xffff); + b[3] = (u16) (((state->chip.d9.cfg.xtal_clock_khz * 1000)) & 0xffff); + b[4] = (u16) ((state->chip.d9.cfg.vcxo_timer >> 16) & 0xffff); + b[5] = (u16) ((state->chip.d9.cfg.vcxo_timer) & 0xffff); + b[6] = (u16) ((state->chip.d9.cfg.timing_frequency >> 16) & 0xffff); + b[7] = (u16) ((state->chip.d9.cfg.timing_frequency) & 0xffff); + b[29] = state->chip.d9.cfg.if_drives; + if (dib9000_mbx_send(state, OUT_MSG_INIT_DEMOD, b, ARRAY_SIZE(b)) != 0) + return -EIO; + + if (dib9000_mbx_send(state, OUT_MSG_FE_FW_DL, NULL, 0) != 0) + return -EIO; + + if (dib9000_mbx_get_message(state, IN_MSG_FE_FW_DL_DONE, b, &size) < 0) + return -EIO; + + if (size > ARRAY_SIZE(b)) { + dprintk("error : firmware returned %dbytes needed but the used buffer has only %dbytes\n Firmware init ABORTED", size, + (int)ARRAY_SIZE(b)); + return -EINVAL; + } + + for (i = 0; i < size; i += 2) { + state->platform.risc.fe_mm[i / 2].addr = b[i + 0]; + state->platform.risc.fe_mm[i / 2].size = b[i + 1]; + } + + return 0; +} + +static void dib9000_fw_set_channel_head(struct dib9000_state *state) +{ + u8 b[9]; + u32 freq = state->fe[0]->dtv_property_cache.frequency / 1000; + if (state->fe_id % 2) + freq += 101; + + b[0] = (u8) ((freq >> 0) & 0xff); + b[1] = (u8) ((freq >> 8) & 0xff); + b[2] = (u8) ((freq >> 16) & 0xff); + b[3] = (u8) ((freq >> 24) & 0xff); + b[4] = (u8) ((state->fe[0]->dtv_property_cache.bandwidth_hz / 1000 >> 0) & 0xff); + b[5] = (u8) ((state->fe[0]->dtv_property_cache.bandwidth_hz / 1000 >> 8) & 0xff); + b[6] = (u8) ((state->fe[0]->dtv_property_cache.bandwidth_hz / 1000 >> 16) & 0xff); + b[7] = (u8) ((state->fe[0]->dtv_property_cache.bandwidth_hz / 1000 >> 24) & 0xff); + b[8] = 0x80; /* do not wait for CELL ID when doing autosearch */ + if (state->fe[0]->dtv_property_cache.delivery_system == SYS_DVBT) + b[8] |= 1; + dib9000_risc_mem_write(state, FE_MM_W_CHANNEL_HEAD, b); +} + +static int dib9000_fw_get_channel(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + struct dibDVBTChannel { + s8 spectrum_inversion; + + s8 nfft; + s8 guard; + s8 constellation; + + s8 hrch; + s8 alpha; + s8 code_rate_hp; + s8 code_rate_lp; + s8 select_hp; + + s8 intlv_native; + }; + struct dibDVBTChannel *ch; + int ret = 0; + + if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + ret = -EIO; + goto error; + } + + dib9000_risc_mem_read(state, FE_MM_R_CHANNEL_UNION, + state->i2c_read_buffer, sizeof(struct dibDVBTChannel)); + ch = (struct dibDVBTChannel *)state->i2c_read_buffer; + + + switch (ch->spectrum_inversion & 0x7) { + case 1: + state->fe[0]->dtv_property_cache.inversion = INVERSION_ON; + break; + case 0: + state->fe[0]->dtv_property_cache.inversion = INVERSION_OFF; + break; + default: + case -1: + state->fe[0]->dtv_property_cache.inversion = INVERSION_AUTO; + break; + } + switch (ch->nfft) { + case 0: + state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K; + break; + case 2: + state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_4K; + break; + case 1: + state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; + break; + default: + case -1: + state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_AUTO; + break; + } + switch (ch->guard) { + case 0: + state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4; + break; + default: + case -1: + state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_AUTO; + break; + } + switch (ch->constellation) { + case 2: + state->fe[0]->dtv_property_cache.modulation = QAM_64; + break; + case 1: + state->fe[0]->dtv_property_cache.modulation = QAM_16; + break; + case 0: + state->fe[0]->dtv_property_cache.modulation = QPSK; + break; + default: + case -1: + state->fe[0]->dtv_property_cache.modulation = QAM_AUTO; + break; + } + switch (ch->hrch) { + case 0: + state->fe[0]->dtv_property_cache.hierarchy = HIERARCHY_NONE; + break; + case 1: + state->fe[0]->dtv_property_cache.hierarchy = HIERARCHY_1; + break; + default: + case -1: + state->fe[0]->dtv_property_cache.hierarchy = HIERARCHY_AUTO; + break; + } + switch (ch->code_rate_hp) { + case 1: + state->fe[0]->dtv_property_cache.code_rate_HP = FEC_1_2; + break; + case 2: + state->fe[0]->dtv_property_cache.code_rate_HP = FEC_2_3; + break; + case 3: + state->fe[0]->dtv_property_cache.code_rate_HP = FEC_3_4; + break; + case 5: + state->fe[0]->dtv_property_cache.code_rate_HP = FEC_5_6; + break; + case 7: + state->fe[0]->dtv_property_cache.code_rate_HP = FEC_7_8; + break; + default: + case -1: + state->fe[0]->dtv_property_cache.code_rate_HP = FEC_AUTO; + break; + } + switch (ch->code_rate_lp) { + case 1: + state->fe[0]->dtv_property_cache.code_rate_LP = FEC_1_2; + break; + case 2: + state->fe[0]->dtv_property_cache.code_rate_LP = FEC_2_3; + break; + case 3: + state->fe[0]->dtv_property_cache.code_rate_LP = FEC_3_4; + break; + case 5: + state->fe[0]->dtv_property_cache.code_rate_LP = FEC_5_6; + break; + case 7: + state->fe[0]->dtv_property_cache.code_rate_LP = FEC_7_8; + break; + default: + case -1: + state->fe[0]->dtv_property_cache.code_rate_LP = FEC_AUTO; + break; + } + +error: + mutex_unlock(&state->platform.risc.mem_mbx_lock); + return ret; +} + +static int dib9000_fw_set_channel_union(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + struct dibDVBTChannel { + s8 spectrum_inversion; + + s8 nfft; + s8 guard; + s8 constellation; + + s8 hrch; + s8 alpha; + s8 code_rate_hp; + s8 code_rate_lp; + s8 select_hp; + + s8 intlv_native; + }; + struct dibDVBTChannel ch; + + switch (state->fe[0]->dtv_property_cache.inversion) { + case INVERSION_ON: + ch.spectrum_inversion = 1; + break; + case INVERSION_OFF: + ch.spectrum_inversion = 0; + break; + default: + case INVERSION_AUTO: + ch.spectrum_inversion = -1; + break; + } + switch (state->fe[0]->dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_2K: + ch.nfft = 0; + break; + case TRANSMISSION_MODE_4K: + ch.nfft = 2; + break; + case TRANSMISSION_MODE_8K: + ch.nfft = 1; + break; + default: + case TRANSMISSION_MODE_AUTO: + ch.nfft = 1; + break; + } + switch (state->fe[0]->dtv_property_cache.guard_interval) { + case GUARD_INTERVAL_1_32: + ch.guard = 0; + break; + case GUARD_INTERVAL_1_16: + ch.guard = 1; + break; + case GUARD_INTERVAL_1_8: + ch.guard = 2; + break; + case GUARD_INTERVAL_1_4: + ch.guard = 3; + break; + default: + case GUARD_INTERVAL_AUTO: + ch.guard = -1; + break; + } + switch (state->fe[0]->dtv_property_cache.modulation) { + case QAM_64: + ch.constellation = 2; + break; + case QAM_16: + ch.constellation = 1; + break; + case QPSK: + ch.constellation = 0; + break; + default: + case QAM_AUTO: + ch.constellation = -1; + break; + } + switch (state->fe[0]->dtv_property_cache.hierarchy) { + case HIERARCHY_NONE: + ch.hrch = 0; + break; + case HIERARCHY_1: + case HIERARCHY_2: + case HIERARCHY_4: + ch.hrch = 1; + break; + default: + case HIERARCHY_AUTO: + ch.hrch = -1; + break; + } + ch.alpha = 1; + switch (state->fe[0]->dtv_property_cache.code_rate_HP) { + case FEC_1_2: + ch.code_rate_hp = 1; + break; + case FEC_2_3: + ch.code_rate_hp = 2; + break; + case FEC_3_4: + ch.code_rate_hp = 3; + break; + case FEC_5_6: + ch.code_rate_hp = 5; + break; + case FEC_7_8: + ch.code_rate_hp = 7; + break; + default: + case FEC_AUTO: + ch.code_rate_hp = -1; + break; + } + switch (state->fe[0]->dtv_property_cache.code_rate_LP) { + case FEC_1_2: + ch.code_rate_lp = 1; + break; + case FEC_2_3: + ch.code_rate_lp = 2; + break; + case FEC_3_4: + ch.code_rate_lp = 3; + break; + case FEC_5_6: + ch.code_rate_lp = 5; + break; + case FEC_7_8: + ch.code_rate_lp = 7; + break; + default: + case FEC_AUTO: + ch.code_rate_lp = -1; + break; + } + ch.select_hp = 1; + ch.intlv_native = 1; + + dib9000_risc_mem_write(state, FE_MM_W_CHANNEL_UNION, (u8 *) &ch); + + return 0; +} + +static int dib9000_fw_tune(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + int ret = 10, search = state->channel_status.status == CHANNEL_STATUS_PARAMETERS_UNKNOWN; + s8 i; + + switch (state->tune_state) { + case CT_DEMOD_START: + dib9000_fw_set_channel_head(state); + + /* write the channel context - a channel is initialized to 0, so it is OK */ + dib9000_risc_mem_write(state, FE_MM_W_CHANNEL_CONTEXT, (u8 *) fe_info); + dib9000_risc_mem_write(state, FE_MM_W_FE_INFO, (u8 *) fe_info); + + if (search) + dib9000_mbx_send(state, OUT_MSG_FE_CHANNEL_SEARCH, NULL, 0); + else { + dib9000_fw_set_channel_union(fe); + dib9000_mbx_send(state, OUT_MSG_FE_CHANNEL_TUNE, NULL, 0); + } + state->tune_state = CT_DEMOD_STEP_1; + break; + case CT_DEMOD_STEP_1: + if (search) + dib9000_risc_mem_read(state, FE_MM_R_CHANNEL_SEARCH_STATE, state->i2c_read_buffer, 1); + else + dib9000_risc_mem_read(state, FE_MM_R_CHANNEL_TUNE_STATE, state->i2c_read_buffer, 1); + i = (s8)state->i2c_read_buffer[0]; + switch (i) { /* something happened */ + case 0: + break; + case -2: /* tps locks are "slower" than MPEG locks -> even in autosearch data is OK here */ + if (search) + state->status = FE_STATUS_DEMOD_SUCCESS; + else { + state->tune_state = CT_DEMOD_STOP; + state->status = FE_STATUS_LOCKED; + } + break; + default: + state->status = FE_STATUS_TUNE_FAILED; + state->tune_state = CT_DEMOD_STOP; + break; + } + break; + default: + ret = FE_CALLBACK_TIME_NEVER; + break; + } + + return ret; +} + +static int dib9000_fw_set_diversity_in(struct dvb_frontend *fe, int onoff) +{ + struct dib9000_state *state = fe->demodulator_priv; + u16 mode = (u16) onoff; + return dib9000_mbx_send(state, OUT_MSG_ENABLE_DIVERSITY, &mode, 1); +} + +static int dib9000_fw_set_output_mode(struct dvb_frontend *fe, int mode) +{ + struct dib9000_state *state = fe->demodulator_priv; + u16 outreg, smo_mode; + + dprintk("setting output mode for demod %p to %d", fe, mode); + + switch (mode) { + case OUTMODE_MPEG2_PAR_GATED_CLK: + outreg = (1 << 10); /* 0x0400 */ + break; + case OUTMODE_MPEG2_PAR_CONT_CLK: + outreg = (1 << 10) | (1 << 6); /* 0x0440 */ + break; + case OUTMODE_MPEG2_SERIAL: + outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */ + break; + case OUTMODE_DIVERSITY: + outreg = (1 << 10) | (4 << 6); /* 0x0500 */ + break; + case OUTMODE_MPEG2_FIFO: + outreg = (1 << 10) | (5 << 6); + break; + case OUTMODE_HIGH_Z: + outreg = 0; + break; + default: + dprintk("Unhandled output_mode passed to be set for demod %p", &state->fe[0]); + return -EINVAL; + } + + dib9000_write_word(state, 1795, outreg); + + switch (mode) { + case OUTMODE_MPEG2_PAR_GATED_CLK: + case OUTMODE_MPEG2_PAR_CONT_CLK: + case OUTMODE_MPEG2_SERIAL: + case OUTMODE_MPEG2_FIFO: + smo_mode = (dib9000_read_word(state, 295) & 0x0010) | (1 << 1); + if (state->chip.d9.cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + dib9000_write_word(state, 295, smo_mode); + break; + } + + outreg = to_fw_output_mode(mode); + return dib9000_mbx_send(state, OUT_MSG_SET_OUTPUT_MODE, &outreg, 1); +} + +static int dib9000_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dib9000_state *state = i2c_get_adapdata(i2c_adap); + u16 i, len, t, index_msg; + + for (index_msg = 0; index_msg < num; index_msg++) { + if (msg[index_msg].flags & I2C_M_RD) { /* read */ + len = msg[index_msg].len; + if (len > 16) + len = 16; + + if (dib9000_read_word(state, 790) != 0) + dprintk("TunerITF: read busy"); + + dib9000_write_word(state, 784, (u16) (msg[index_msg].addr)); + dib9000_write_word(state, 787, (len / 2) - 1); + dib9000_write_word(state, 786, 1); /* start read */ + + i = 1000; + while (dib9000_read_word(state, 790) != (len / 2) && i) + i--; + + if (i == 0) + dprintk("TunerITF: read failed"); + + for (i = 0; i < len; i += 2) { + t = dib9000_read_word(state, 785); + msg[index_msg].buf[i] = (t >> 8) & 0xff; + msg[index_msg].buf[i + 1] = (t) & 0xff; + } + if (dib9000_read_word(state, 790) != 0) + dprintk("TunerITF: read more data than expected"); + } else { + i = 1000; + while (dib9000_read_word(state, 789) && i) + i--; + if (i == 0) + dprintk("TunerITF: write busy"); + + len = msg[index_msg].len; + if (len > 16) + len = 16; + + for (i = 0; i < len; i += 2) + dib9000_write_word(state, 785, (msg[index_msg].buf[i] << 8) | msg[index_msg].buf[i + 1]); + dib9000_write_word(state, 784, (u16) msg[index_msg].addr); + dib9000_write_word(state, 787, (len / 2) - 1); + dib9000_write_word(state, 786, 0); /* start write */ + + i = 1000; + while (dib9000_read_word(state, 791) > 0 && i) + i--; + if (i == 0) + dprintk("TunerITF: write failed"); + } + } + return num; +} + +int dib9000_fw_set_component_bus_speed(struct dvb_frontend *fe, u16 speed) +{ + struct dib9000_state *state = fe->demodulator_priv; + + state->component_bus_speed = speed; + return 0; +} +EXPORT_SYMBOL(dib9000_fw_set_component_bus_speed); + +static int dib9000_fw_component_bus_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dib9000_state *state = i2c_get_adapdata(i2c_adap); + u8 type = 0; /* I2C */ + u8 port = DIBX000_I2C_INTERFACE_GPIO_3_4; + u16 scl = state->component_bus_speed; /* SCL frequency */ + struct dib9000_fe_memory_map *m = &state->platform.risc.fe_mm[FE_MM_RW_COMPONENT_ACCESS_BUFFER]; + u8 p[13] = { 0 }; + + p[0] = type; + p[1] = port; + p[2] = msg[0].addr << 1; + + p[3] = (u8) scl & 0xff; /* scl */ + p[4] = (u8) (scl >> 8); + + p[7] = 0; + p[8] = 0; + + p[9] = (u8) (msg[0].len); + p[10] = (u8) (msg[0].len >> 8); + if ((num > 1) && (msg[1].flags & I2C_M_RD)) { + p[11] = (u8) (msg[1].len); + p[12] = (u8) (msg[1].len >> 8); + } else { + p[11] = 0; + p[12] = 0; + } + + if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } + + dib9000_risc_mem_write(state, FE_MM_W_COMPONENT_ACCESS, p); + + { /* write-part */ + dib9000_risc_mem_setup_cmd(state, m->addr, msg[0].len, 0); + dib9000_risc_mem_write_chunks(state, msg[0].buf, msg[0].len); + } + + /* do the transaction */ + if (dib9000_fw_memmbx_sync(state, FE_SYNC_COMPONENT_ACCESS) < 0) { + mutex_unlock(&state->platform.risc.mem_mbx_lock); + return 0; + } + + /* read back any possible result */ + if ((num > 1) && (msg[1].flags & I2C_M_RD)) + dib9000_risc_mem_read(state, FE_MM_RW_COMPONENT_ACCESS_BUFFER, msg[1].buf, msg[1].len); + + mutex_unlock(&state->platform.risc.mem_mbx_lock); + + return num; +} + +static u32 dib9000_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dib9000_tuner_algo = { + .master_xfer = dib9000_tuner_xfer, + .functionality = dib9000_i2c_func, +}; + +static struct i2c_algorithm dib9000_component_bus_algo = { + .master_xfer = dib9000_fw_component_bus_xfer, + .functionality = dib9000_i2c_func, +}; + +struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe) +{ + struct dib9000_state *st = fe->demodulator_priv; + return &st->tuner_adap; +} +EXPORT_SYMBOL(dib9000_get_tuner_interface); + +struct i2c_adapter *dib9000_get_component_bus_interface(struct dvb_frontend *fe) +{ + struct dib9000_state *st = fe->demodulator_priv; + return &st->component_bus; +} +EXPORT_SYMBOL(dib9000_get_component_bus_interface); + +struct i2c_adapter *dib9000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating) +{ + struct dib9000_state *st = fe->demodulator_priv; + return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); +} +EXPORT_SYMBOL(dib9000_get_i2c_master); + +int dib9000_set_i2c_adapter(struct dvb_frontend *fe, struct i2c_adapter *i2c) +{ + struct dib9000_state *st = fe->demodulator_priv; + + st->i2c.i2c_adap = i2c; + return 0; +} +EXPORT_SYMBOL(dib9000_set_i2c_adapter); + +static int dib9000_cfg_gpio(struct dib9000_state *st, u8 num, u8 dir, u8 val) +{ + st->gpio_dir = dib9000_read_word(st, 773); + st->gpio_dir &= ~(1 << num); /* reset the direction bit */ + st->gpio_dir |= (dir & 0x1) << num; /* set the new direction */ + dib9000_write_word(st, 773, st->gpio_dir); + + st->gpio_val = dib9000_read_word(st, 774); + st->gpio_val &= ~(1 << num); /* reset the direction bit */ + st->gpio_val |= (val & 0x01) << num; /* set the new value */ + dib9000_write_word(st, 774, st->gpio_val); + + dprintk("gpio dir: %04x: gpio val: %04x", st->gpio_dir, st->gpio_val); + + return 0; +} + +int dib9000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + struct dib9000_state *state = fe->demodulator_priv; + return dib9000_cfg_gpio(state, num, dir, val); +} +EXPORT_SYMBOL(dib9000_set_gpio); + +int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) +{ + struct dib9000_state *state = fe->demodulator_priv; + u16 val; + int ret; + + if ((state->pid_ctrl_index != -2) && (state->pid_ctrl_index < 9)) { + /* postpone the pid filtering cmd */ + dprintk("pid filter cmd postpone"); + state->pid_ctrl_index++; + state->pid_ctrl[state->pid_ctrl_index].cmd = DIB9000_PID_FILTER_CTRL; + state->pid_ctrl[state->pid_ctrl_index].onoff = onoff; + return 0; + } + + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + + val = dib9000_read_word(state, 294 + 1) & 0xffef; + val |= (onoff & 0x1) << 4; + + dprintk("PID filter enabled %d", onoff); + ret = dib9000_write_word(state, 294 + 1, val); + mutex_unlock(&state->demod_lock); + return ret; + +} +EXPORT_SYMBOL(dib9000_fw_pid_filter_ctrl); + +int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +{ + struct dib9000_state *state = fe->demodulator_priv; + int ret; + + if (state->pid_ctrl_index != -2) { + /* postpone the pid filtering cmd */ + dprintk("pid filter postpone"); + if (state->pid_ctrl_index < 9) { + state->pid_ctrl_index++; + state->pid_ctrl[state->pid_ctrl_index].cmd = DIB9000_PID_FILTER; + state->pid_ctrl[state->pid_ctrl_index].id = id; + state->pid_ctrl[state->pid_ctrl_index].pid = pid; + state->pid_ctrl[state->pid_ctrl_index].onoff = onoff; + } else + dprintk("can not add any more pid ctrl cmd"); + return 0; + } + + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff); + ret = dib9000_write_word(state, 300 + 1 + id, + onoff ? (1 << 13) | pid : 0); + mutex_unlock(&state->demod_lock); + return ret; +} +EXPORT_SYMBOL(dib9000_fw_pid_filter); + +int dib9000_firmware_post_pll_init(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + return dib9000_fw_init(state); +} +EXPORT_SYMBOL(dib9000_firmware_post_pll_init); + +static void dib9000_release(struct dvb_frontend *demod) +{ + struct dib9000_state *st = demod->demodulator_priv; + u8 index_frontend; + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (st->fe[index_frontend] != NULL); index_frontend++) + dvb_frontend_detach(st->fe[index_frontend]); + + dibx000_exit_i2c_master(&st->i2c_master); + + i2c_del_adapter(&st->tuner_adap); + i2c_del_adapter(&st->component_bus); + kfree(st->fe[0]); + kfree(st); +} + +static int dib9000_wakeup(struct dvb_frontend *fe) +{ + return 0; +} + +static int dib9000_sleep(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + u8 index_frontend; + int ret = 0; + + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]); + if (ret < 0) + goto error; + } + ret = dib9000_mbx_send(state, OUT_MSG_FE_SLEEP, NULL, 0); + +error: + mutex_unlock(&state->demod_lock); + return ret; +} + +static int dib9000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static int dib9000_get_frontend(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + u8 index_frontend, sub_index_frontend; + fe_status_t stat; + int ret = 0; + + if (state->get_frontend_internal == 0) { + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + } + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat); + if (stat & FE_HAS_SYNC) { + dprintk("TPS lock on the slave%i", index_frontend); + + /* synchronize the cache with the other frontends */ + state->fe[index_frontend]->ops.get_frontend(state->fe[index_frontend]); + for (sub_index_frontend = 0; (sub_index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[sub_index_frontend] != NULL); + sub_index_frontend++) { + if (sub_index_frontend != index_frontend) { + state->fe[sub_index_frontend]->dtv_property_cache.modulation = + state->fe[index_frontend]->dtv_property_cache.modulation; + state->fe[sub_index_frontend]->dtv_property_cache.inversion = + state->fe[index_frontend]->dtv_property_cache.inversion; + state->fe[sub_index_frontend]->dtv_property_cache.transmission_mode = + state->fe[index_frontend]->dtv_property_cache.transmission_mode; + state->fe[sub_index_frontend]->dtv_property_cache.guard_interval = + state->fe[index_frontend]->dtv_property_cache.guard_interval; + state->fe[sub_index_frontend]->dtv_property_cache.hierarchy = + state->fe[index_frontend]->dtv_property_cache.hierarchy; + state->fe[sub_index_frontend]->dtv_property_cache.code_rate_HP = + state->fe[index_frontend]->dtv_property_cache.code_rate_HP; + state->fe[sub_index_frontend]->dtv_property_cache.code_rate_LP = + state->fe[index_frontend]->dtv_property_cache.code_rate_LP; + state->fe[sub_index_frontend]->dtv_property_cache.rolloff = + state->fe[index_frontend]->dtv_property_cache.rolloff; + } + } + ret = 0; + goto return_value; + } + } + + /* get the channel from master chip */ + ret = dib9000_fw_get_channel(fe); + if (ret != 0) + goto return_value; + + /* synchronize the cache with the other frontends */ + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->dtv_property_cache.inversion = fe->dtv_property_cache.inversion; + state->fe[index_frontend]->dtv_property_cache.transmission_mode = fe->dtv_property_cache.transmission_mode; + state->fe[index_frontend]->dtv_property_cache.guard_interval = fe->dtv_property_cache.guard_interval; + state->fe[index_frontend]->dtv_property_cache.modulation = fe->dtv_property_cache.modulation; + state->fe[index_frontend]->dtv_property_cache.hierarchy = fe->dtv_property_cache.hierarchy; + state->fe[index_frontend]->dtv_property_cache.code_rate_HP = fe->dtv_property_cache.code_rate_HP; + state->fe[index_frontend]->dtv_property_cache.code_rate_LP = fe->dtv_property_cache.code_rate_LP; + state->fe[index_frontend]->dtv_property_cache.rolloff = fe->dtv_property_cache.rolloff; + } + ret = 0; + +return_value: + if (state->get_frontend_internal == 0) + mutex_unlock(&state->demod_lock); + return ret; +} + +static int dib9000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) +{ + struct dib9000_state *state = fe->demodulator_priv; + state->tune_state = tune_state; + if (tune_state == CT_DEMOD_START) + state->status = FE_STATUS_TUNE_PENDING; + + return 0; +} + +static u32 dib9000_get_status(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + return state->status; +} + +static int dib9000_set_channel_status(struct dvb_frontend *fe, struct dvb_frontend_parametersContext *channel_status) +{ + struct dib9000_state *state = fe->demodulator_priv; + + memcpy(&state->channel_status, channel_status, sizeof(struct dvb_frontend_parametersContext)); + return 0; +} + +static int dib9000_set_frontend(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + int sleep_time, sleep_time_slave; + u32 frontend_status; + u8 nbr_pending, exit_condition, index_frontend, index_frontend_success; + struct dvb_frontend_parametersContext channel_status; + + /* check that the correct parameters are set */ + if (state->fe[0]->dtv_property_cache.frequency == 0) { + dprintk("dib9000: must specify frequency "); + return 0; + } + + if (state->fe[0]->dtv_property_cache.bandwidth_hz == 0) { + dprintk("dib9000: must specify bandwidth "); + return 0; + } + + state->pid_ctrl_index = -1; /* postpone the pid filtering cmd */ + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } + + fe->dtv_property_cache.delivery_system = SYS_DVBT; + + /* set the master status */ + if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO || + state->fe[0]->dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO || + state->fe[0]->dtv_property_cache.modulation == QAM_AUTO || + state->fe[0]->dtv_property_cache.code_rate_HP == FEC_AUTO) { + /* no channel specified, autosearch the channel */ + state->channel_status.status = CHANNEL_STATUS_PARAMETERS_UNKNOWN; + } else + state->channel_status.status = CHANNEL_STATUS_PARAMETERS_SET; + + /* set mode and status for the different frontends */ + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + dib9000_fw_set_diversity_in(state->fe[index_frontend], 1); + + /* synchronization of the cache */ + memcpy(&state->fe[index_frontend]->dtv_property_cache, &fe->dtv_property_cache, sizeof(struct dtv_frontend_properties)); + + state->fe[index_frontend]->dtv_property_cache.delivery_system = SYS_DVBT; + dib9000_fw_set_output_mode(state->fe[index_frontend], OUTMODE_HIGH_Z); + + dib9000_set_channel_status(state->fe[index_frontend], &state->channel_status); + dib9000_set_tune_state(state->fe[index_frontend], CT_DEMOD_START); + } + + /* actual tune */ + exit_condition = 0; /* 0: tune pending; 1: tune failed; 2:tune success */ + index_frontend_success = 0; + do { + sleep_time = dib9000_fw_tune(state->fe[0]); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + sleep_time_slave = dib9000_fw_tune(state->fe[index_frontend]); + if (sleep_time == FE_CALLBACK_TIME_NEVER) + sleep_time = sleep_time_slave; + else if ((sleep_time_slave != FE_CALLBACK_TIME_NEVER) && (sleep_time_slave > sleep_time)) + sleep_time = sleep_time_slave; + } + if (sleep_time != FE_CALLBACK_TIME_NEVER) + msleep(sleep_time / 10); + else + break; + + nbr_pending = 0; + exit_condition = 0; + index_frontend_success = 0; + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + frontend_status = -dib9000_get_status(state->fe[index_frontend]); + if (frontend_status > -FE_STATUS_TUNE_PENDING) { + exit_condition = 2; /* tune success */ + index_frontend_success = index_frontend; + break; + } + if (frontend_status == -FE_STATUS_TUNE_PENDING) + nbr_pending++; /* some frontends are still tuning */ + } + if ((exit_condition != 2) && (nbr_pending == 0)) + exit_condition = 1; /* if all tune are done and no success, exit: tune failed */ + + } while (exit_condition == 0); + + /* check the tune result */ + if (exit_condition == 1) { /* tune failed */ + dprintk("tune failed"); + mutex_unlock(&state->demod_lock); + /* tune failed; put all the pid filtering cmd to junk */ + state->pid_ctrl_index = -1; + return 0; + } + + dprintk("tune success on frontend%i", index_frontend_success); + + /* synchronize all the channel cache */ + state->get_frontend_internal = 1; + dib9000_get_frontend(state->fe[0]); + state->get_frontend_internal = 0; + + /* retune the other frontends with the found channel */ + channel_status.status = CHANNEL_STATUS_PARAMETERS_SET; + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + /* only retune the frontends which was not tuned success */ + if (index_frontend != index_frontend_success) { + dib9000_set_channel_status(state->fe[index_frontend], &channel_status); + dib9000_set_tune_state(state->fe[index_frontend], CT_DEMOD_START); + } + } + do { + sleep_time = FE_CALLBACK_TIME_NEVER; + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + if (index_frontend != index_frontend_success) { + sleep_time_slave = dib9000_fw_tune(state->fe[index_frontend]); + if (sleep_time == FE_CALLBACK_TIME_NEVER) + sleep_time = sleep_time_slave; + else if ((sleep_time_slave != FE_CALLBACK_TIME_NEVER) && (sleep_time_slave > sleep_time)) + sleep_time = sleep_time_slave; + } + } + if (sleep_time != FE_CALLBACK_TIME_NEVER) + msleep(sleep_time / 10); + else + break; + + nbr_pending = 0; + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + if (index_frontend != index_frontend_success) { + frontend_status = -dib9000_get_status(state->fe[index_frontend]); + if ((index_frontend != index_frontend_success) && (frontend_status == -FE_STATUS_TUNE_PENDING)) + nbr_pending++; /* some frontends are still tuning */ + } + } + } while (nbr_pending != 0); + + /* set the output mode */ + dib9000_fw_set_output_mode(state->fe[0], state->chip.d9.cfg.output_mode); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + dib9000_fw_set_output_mode(state->fe[index_frontend], OUTMODE_DIVERSITY); + + /* turn off the diversity for the last frontend */ + dib9000_fw_set_diversity_in(state->fe[index_frontend - 1], 0); + + mutex_unlock(&state->demod_lock); + if (state->pid_ctrl_index >= 0) { + u8 index_pid_filter_cmd; + u8 pid_ctrl_index = state->pid_ctrl_index; + + state->pid_ctrl_index = -2; + for (index_pid_filter_cmd = 0; + index_pid_filter_cmd <= pid_ctrl_index; + index_pid_filter_cmd++) { + if (state->pid_ctrl[index_pid_filter_cmd].cmd == DIB9000_PID_FILTER_CTRL) + dib9000_fw_pid_filter_ctrl(state->fe[0], + state->pid_ctrl[index_pid_filter_cmd].onoff); + else if (state->pid_ctrl[index_pid_filter_cmd].cmd == DIB9000_PID_FILTER) + dib9000_fw_pid_filter(state->fe[0], + state->pid_ctrl[index_pid_filter_cmd].id, + state->pid_ctrl[index_pid_filter_cmd].pid, + state->pid_ctrl[index_pid_filter_cmd].onoff); + } + } + /* do not postpone any more the pid filtering */ + state->pid_ctrl_index = -2; + + return 0; +} + +static u16 dib9000_read_lock(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + + return dib9000_read_word(state, 535); +} + +static int dib9000_read_status(struct dvb_frontend *fe, fe_status_t * stat) +{ + struct dib9000_state *state = fe->demodulator_priv; + u8 index_frontend; + u16 lock = 0, lock_slave = 0; + + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + lock_slave |= dib9000_read_lock(state->fe[index_frontend]); + + lock = dib9000_read_word(state, 535); + + *stat = 0; + + if ((lock & 0x8000) || (lock_slave & 0x8000)) + *stat |= FE_HAS_SIGNAL; + if ((lock & 0x3000) || (lock_slave & 0x3000)) + *stat |= FE_HAS_CARRIER; + if ((lock & 0x0100) || (lock_slave & 0x0100)) + *stat |= FE_HAS_VITERBI; + if (((lock & 0x0038) == 0x38) || ((lock_slave & 0x0038) == 0x38)) + *stat |= FE_HAS_SYNC; + if ((lock & 0x0008) || (lock_slave & 0x0008)) + *stat |= FE_HAS_LOCK; + + mutex_unlock(&state->demod_lock); + + return 0; +} + +static int dib9000_read_ber(struct dvb_frontend *fe, u32 * ber) +{ + struct dib9000_state *state = fe->demodulator_priv; + u16 *c; + int ret = 0; + + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } + if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + mutex_unlock(&state->platform.risc.mem_mbx_lock); + ret = -EIO; + goto error; + } + dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, + state->i2c_read_buffer, 16 * 2); + mutex_unlock(&state->platform.risc.mem_mbx_lock); + + c = (u16 *)state->i2c_read_buffer; + + *ber = c[10] << 16 | c[11]; + +error: + mutex_unlock(&state->demod_lock); + return ret; +} + +static int dib9000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +{ + struct dib9000_state *state = fe->demodulator_priv; + u8 index_frontend; + u16 *c = (u16 *)state->i2c_read_buffer; + u16 val; + int ret = 0; + + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + *strength = 0; + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val); + if (val > 65535 - *strength) + *strength = 65535; + else + *strength += val; + } + + if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } + if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + mutex_unlock(&state->platform.risc.mem_mbx_lock); + ret = -EIO; + goto error; + } + dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2); + mutex_unlock(&state->platform.risc.mem_mbx_lock); + + val = 65535 - c[4]; + if (val > 65535 - *strength) + *strength = 65535; + else + *strength += val; + +error: + mutex_unlock(&state->demod_lock); + return ret; +} + +static u32 dib9000_get_snr(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + u16 *c = (u16 *)state->i2c_read_buffer; + u32 n, s, exp; + u16 val; + + if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } + if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + mutex_unlock(&state->platform.risc.mem_mbx_lock); + return 0; + } + dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2); + mutex_unlock(&state->platform.risc.mem_mbx_lock); + + val = c[7]; + n = (val >> 4) & 0xff; + exp = ((val & 0xf) << 2); + val = c[8]; + exp += ((val >> 14) & 0x3); + if ((exp & 0x20) != 0) + exp -= 0x40; + n <<= exp + 16; + + s = (val >> 6) & 0xFF; + exp = (val & 0x3F); + if ((exp & 0x20) != 0) + exp -= 0x40; + s <<= exp + 16; + + if (n > 0) { + u32 t = (s / n) << 16; + return t + ((s << 16) - n * t) / n; + } + return 0xffffffff; +} + +static int dib9000_read_snr(struct dvb_frontend *fe, u16 * snr) +{ + struct dib9000_state *state = fe->demodulator_priv; + u8 index_frontend; + u32 snr_master; + + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + snr_master = dib9000_get_snr(fe); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + snr_master += dib9000_get_snr(state->fe[index_frontend]); + + if ((snr_master >> 16) != 0) { + snr_master = 10 * intlog10(snr_master >> 16); + *snr = snr_master / ((1 << 24) / 10); + } else + *snr = 0; + + mutex_unlock(&state->demod_lock); + + return 0; +} + +static int dib9000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) +{ + struct dib9000_state *state = fe->demodulator_priv; + u16 *c = (u16 *)state->i2c_read_buffer; + int ret = 0; + + if (mutex_lock_interruptible(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } + if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + mutex_unlock(&state->platform.risc.mem_mbx_lock); + ret = -EIO; + goto error; + } + dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2); + mutex_unlock(&state->platform.risc.mem_mbx_lock); + + *unc = c[12]; + +error: + mutex_unlock(&state->demod_lock); + return ret; +} + +int dib9000_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, u8 first_addr) +{ + int k = 0, ret = 0; + u8 new_addr = 0; + struct i2c_device client = {.i2c_adap = i2c }; + + client.i2c_write_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL); + if (!client.i2c_write_buffer) { + dprintk("%s: not enough memory", __func__); + return -ENOMEM; + } + client.i2c_read_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL); + if (!client.i2c_read_buffer) { + dprintk("%s: not enough memory", __func__); + ret = -ENOMEM; + goto error_memory; + } + + client.i2c_addr = default_addr + 16; + dib9000_i2c_write16(&client, 1796, 0x0); + + for (k = no_of_demods - 1; k >= 0; k--) { + /* designated i2c address */ + new_addr = first_addr + (k << 1); + client.i2c_addr = default_addr; + + dib9000_i2c_write16(&client, 1817, 3); + dib9000_i2c_write16(&client, 1796, 0); + dib9000_i2c_write16(&client, 1227, 1); + dib9000_i2c_write16(&client, 1227, 0); + + client.i2c_addr = new_addr; + dib9000_i2c_write16(&client, 1817, 3); + dib9000_i2c_write16(&client, 1796, 0); + dib9000_i2c_write16(&client, 1227, 1); + dib9000_i2c_write16(&client, 1227, 0); + + if (dib9000_identify(&client) == 0) { + client.i2c_addr = default_addr; + if (dib9000_identify(&client) == 0) { + dprintk("DiB9000 #%d: not identified", k); + ret = -EIO; + goto error; + } + } + + dib9000_i2c_write16(&client, 1795, (1 << 10) | (4 << 6)); + dib9000_i2c_write16(&client, 1794, (new_addr << 2) | 2); + + dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr); + } + + for (k = 0; k < no_of_demods; k++) { + new_addr = first_addr | (k << 1); + client.i2c_addr = new_addr; + + dib9000_i2c_write16(&client, 1794, (new_addr << 2)); + dib9000_i2c_write16(&client, 1795, 0); + } + +error: + kfree(client.i2c_read_buffer); +error_memory: + kfree(client.i2c_write_buffer); + + return ret; +} +EXPORT_SYMBOL(dib9000_i2c_enumeration); + +int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave) +{ + struct dib9000_state *state = fe->demodulator_priv; + u8 index_frontend = 1; + + while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL)) + index_frontend++; + if (index_frontend < MAX_NUMBER_OF_FRONTENDS) { + dprintk("set slave fe %p to index %i", fe_slave, index_frontend); + state->fe[index_frontend] = fe_slave; + return 0; + } + + dprintk("too many slave frontend"); + return -ENOMEM; +} +EXPORT_SYMBOL(dib9000_set_slave_frontend); + +int dib9000_remove_slave_frontend(struct dvb_frontend *fe) +{ + struct dib9000_state *state = fe->demodulator_priv; + u8 index_frontend = 1; + + while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL)) + index_frontend++; + if (index_frontend != 1) { + dprintk("remove slave fe %p (index %i)", state->fe[index_frontend - 1], index_frontend - 1); + state->fe[index_frontend] = NULL; + return 0; + } + + dprintk("no frontend to be removed"); + return -ENODEV; +} +EXPORT_SYMBOL(dib9000_remove_slave_frontend); + +struct dvb_frontend *dib9000_get_slave_frontend(struct dvb_frontend *fe, int slave_index) +{ + struct dib9000_state *state = fe->demodulator_priv; + + if (slave_index >= MAX_NUMBER_OF_FRONTENDS) + return NULL; + return state->fe[slave_index]; +} +EXPORT_SYMBOL(dib9000_get_slave_frontend); + +static struct dvb_frontend_ops dib9000_ops; +struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, const struct dib9000_config *cfg) +{ + struct dvb_frontend *fe; + struct dib9000_state *st; + st = kzalloc(sizeof(struct dib9000_state), GFP_KERNEL); + if (st == NULL) + return NULL; + fe = kzalloc(sizeof(struct dvb_frontend), GFP_KERNEL); + if (fe == NULL) { + kfree(st); + return NULL; + } + + memcpy(&st->chip.d9.cfg, cfg, sizeof(struct dib9000_config)); + st->i2c.i2c_adap = i2c_adap; + st->i2c.i2c_addr = i2c_addr; + st->i2c.i2c_write_buffer = st->i2c_write_buffer; + st->i2c.i2c_read_buffer = st->i2c_read_buffer; + + st->gpio_dir = DIB9000_GPIO_DEFAULT_DIRECTIONS; + st->gpio_val = DIB9000_GPIO_DEFAULT_VALUES; + st->gpio_pwm_pos = DIB9000_GPIO_DEFAULT_PWM_POS; + + mutex_init(&st->platform.risc.mbx_if_lock); + mutex_init(&st->platform.risc.mbx_lock); + mutex_init(&st->platform.risc.mem_lock); + mutex_init(&st->platform.risc.mem_mbx_lock); + mutex_init(&st->demod_lock); + st->get_frontend_internal = 0; + + st->pid_ctrl_index = -2; + + st->fe[0] = fe; + fe->demodulator_priv = st; + memcpy(&st->fe[0]->ops, &dib9000_ops, sizeof(struct dvb_frontend_ops)); + + /* Ensure the output mode remains at the previous default if it's + * not specifically set by the caller. + */ + if ((st->chip.d9.cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (st->chip.d9.cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) + st->chip.d9.cfg.output_mode = OUTMODE_MPEG2_FIFO; + + if (dib9000_identify(&st->i2c) == 0) + goto error; + + dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c.i2c_adap, st->i2c.i2c_addr); + + st->tuner_adap.dev.parent = i2c_adap->dev.parent; + strncpy(st->tuner_adap.name, "DIB9000_FW TUNER ACCESS", sizeof(st->tuner_adap.name)); + st->tuner_adap.algo = &dib9000_tuner_algo; + st->tuner_adap.algo_data = NULL; + i2c_set_adapdata(&st->tuner_adap, st); + if (i2c_add_adapter(&st->tuner_adap) < 0) + goto error; + + st->component_bus.dev.parent = i2c_adap->dev.parent; + strncpy(st->component_bus.name, "DIB9000_FW COMPONENT BUS ACCESS", sizeof(st->component_bus.name)); + st->component_bus.algo = &dib9000_component_bus_algo; + st->component_bus.algo_data = NULL; + st->component_bus_speed = 340; + i2c_set_adapdata(&st->component_bus, st); + if (i2c_add_adapter(&st->component_bus) < 0) + goto component_bus_add_error; + + dib9000_fw_reset(fe); + + return fe; + +component_bus_add_error: + i2c_del_adapter(&st->tuner_adap); +error: + kfree(st); + return NULL; +} +EXPORT_SYMBOL(dib9000_attach); + +static struct dvb_frontend_ops dib9000_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "DiBcom 9000", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib9000_release, + + .init = dib9000_wakeup, + .sleep = dib9000_sleep, + + .set_frontend = dib9000_set_frontend, + .get_tune_settings = dib9000_fe_get_tune_settings, + .get_frontend = dib9000_get_frontend, + + .read_status = dib9000_read_status, + .read_ber = dib9000_read_ber, + .read_signal_strength = dib9000_read_signal_strength, + .read_snr = dib9000_read_snr, + .read_ucblocks = dib9000_read_unc_blocks, +}; + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_AUTHOR("Olivier Grenie "); +MODULE_DESCRIPTION("Driver for the DiBcom 9000 COFDM demodulator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dib9000.h b/drivers/media/dvb-frontends/dib9000.h new file mode 100644 index 00000000..f3639f04 --- /dev/null +++ b/drivers/media/dvb-frontends/dib9000.h @@ -0,0 +1,131 @@ +#ifndef DIB9000_H +#define DIB9000_H + +#include "dibx000_common.h" + +struct dib9000_config { + u8 dvbt_mode; + u8 output_mpeg2_in_188_bytes; + u8 hostbus_diversity; + struct dibx000_bandwidth_config *bw; + + u16 if_drives; + + u32 timing_frequency; + u32 xtal_clock_khz; + u32 vcxo_timer; + u32 demod_clock_khz; + + const u8 *microcode_B_fe_buffer; + u32 microcode_B_fe_size; + + struct dibGPIOFunction gpio_function[2]; + struct dibSubbandSelection subband; + + u8 output_mode; +}; + +#define DEFAULT_DIB9000_I2C_ADDRESS 18 + +#if IS_ENABLED(CONFIG_DVB_DIB9000) +extern struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, const struct dib9000_config *cfg); +extern int dib9000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr); +extern struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe); +extern struct i2c_adapter *dib9000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating); +extern int dib9000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val); +extern int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff); +extern int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff); +extern int dib9000_firmware_post_pll_init(struct dvb_frontend *fe); +extern int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave); +extern int dib9000_remove_slave_frontend(struct dvb_frontend *fe); +extern struct dvb_frontend *dib9000_get_slave_frontend(struct dvb_frontend *fe, int slave_index); +extern struct i2c_adapter *dib9000_get_component_bus_interface(struct dvb_frontend *fe); +extern int dib9000_set_i2c_adapter(struct dvb_frontend *fe, struct i2c_adapter *i2c); +extern int dib9000_fw_set_component_bus_speed(struct dvb_frontend *fe, u16 speed); +#else +static inline struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib9000_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *dib9000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline int dib9000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline int dib9000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib9000_firmware_post_pll_init(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib9000_remove_slave_frontend(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline struct dvb_frontend *dib9000_get_slave_frontend(struct dvb_frontend *fe, int slave_index) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *dib9000_get_component_bus_interface(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline int dib9000_set_i2c_adapter(struct dvb_frontend *fe, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline int dib9000_fw_set_component_bus_speed(struct dvb_frontend *fe, u16 speed) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/dibx000_common.c b/drivers/media/dvb-frontends/dibx000_common.c new file mode 100644 index 00000000..43be7238 --- /dev/null +++ b/drivers/media/dvb-frontends/dibx000_common.c @@ -0,0 +1,515 @@ +#include +#include +#include + +#include "dibx000_common.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiBX000: "); printk(args); printk("\n"); } } while (0) + +static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + + mst->i2c_write_buffer[0] = (reg >> 8) & 0xff; + mst->i2c_write_buffer[1] = reg & 0xff; + mst->i2c_write_buffer[2] = (val >> 8) & 0xff; + mst->i2c_write_buffer[3] = val & 0xff; + + memset(mst->msg, 0, sizeof(struct i2c_msg)); + mst->msg[0].addr = mst->i2c_addr; + mst->msg[0].flags = 0; + mst->msg[0].buf = mst->i2c_write_buffer; + mst->msg[0].len = 4; + + ret = i2c_transfer(mst->i2c_adap, mst->msg, 1) != 1 ? -EREMOTEIO : 0; + mutex_unlock(&mst->i2c_buffer_lock); + + return ret; +} + +static u16 dibx000_read_word(struct dibx000_i2c_master *mst, u16 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return 0; + } + + mst->i2c_write_buffer[0] = reg >> 8; + mst->i2c_write_buffer[1] = reg & 0xff; + + memset(mst->msg, 0, 2 * sizeof(struct i2c_msg)); + mst->msg[0].addr = mst->i2c_addr; + mst->msg[0].flags = 0; + mst->msg[0].buf = mst->i2c_write_buffer; + mst->msg[0].len = 2; + mst->msg[1].addr = mst->i2c_addr; + mst->msg[1].flags = I2C_M_RD; + mst->msg[1].buf = mst->i2c_read_buffer; + mst->msg[1].len = 2; + + if (i2c_transfer(mst->i2c_adap, mst->msg, 2) != 2) + dprintk("i2c read error on %d", reg); + + ret = (mst->i2c_read_buffer[0] << 8) | mst->i2c_read_buffer[1]; + mutex_unlock(&mst->i2c_buffer_lock); + + return ret; +} + +static int dibx000_is_i2c_done(struct dibx000_i2c_master *mst) +{ + int i = 100; + u16 status; + + while (((status = dibx000_read_word(mst, mst->base_reg + 2)) & 0x0100) == 0 && --i > 0) + ; + + /* i2c timed out */ + if (i == 0) + return -EREMOTEIO; + + /* no acknowledge */ + if ((status & 0x0080) == 0) + return -EREMOTEIO; + + return 0; +} + +static int dibx000_master_i2c_write(struct dibx000_i2c_master *mst, struct i2c_msg *msg, u8 stop) +{ + u16 data; + u16 da; + u16 i; + u16 txlen = msg->len, len; + const u8 *b = msg->buf; + + while (txlen) { + dibx000_read_word(mst, mst->base_reg + 2); + + len = txlen > 8 ? 8 : txlen; + for (i = 0; i < len; i += 2) { + data = *b++ << 8; + if (i+1 < len) + data |= *b++; + dibx000_write_word(mst, mst->base_reg, data); + } + da = (((u8) (msg->addr)) << 9) | + (1 << 8) | + (1 << 7) | + (0 << 6) | + (0 << 5) | + ((len & 0x7) << 2) | + (0 << 1) | + (0 << 0); + + if (txlen == msg->len) + da |= 1 << 5; /* start */ + + if (txlen-len == 0 && stop) + da |= 1 << 6; /* stop */ + + dibx000_write_word(mst, mst->base_reg+1, da); + + if (dibx000_is_i2c_done(mst) != 0) + return -EREMOTEIO; + txlen -= len; + } + + return 0; +} + +static int dibx000_master_i2c_read(struct dibx000_i2c_master *mst, struct i2c_msg *msg) +{ + u16 da; + u8 *b = msg->buf; + u16 rxlen = msg->len, len; + + while (rxlen) { + len = rxlen > 8 ? 8 : rxlen; + da = (((u8) (msg->addr)) << 9) | + (1 << 8) | + (1 << 7) | + (0 << 6) | + (0 << 5) | + ((len & 0x7) << 2) | + (1 << 1) | + (0 << 0); + + if (rxlen == msg->len) + da |= 1 << 5; /* start */ + + if (rxlen-len == 0) + da |= 1 << 6; /* stop */ + dibx000_write_word(mst, mst->base_reg+1, da); + + if (dibx000_is_i2c_done(mst) != 0) + return -EREMOTEIO; + + rxlen -= len; + + while (len) { + da = dibx000_read_word(mst, mst->base_reg); + *b++ = (da >> 8) & 0xff; + len--; + if (len >= 1) { + *b++ = da & 0xff; + len--; + } + } + } + + return 0; +} + +int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + + if (mst->device_rev < DIB7000MC && speed < 235) + speed = 235; + return dibx000_write_word(mst, mst->base_reg + 3, (u16)(60000 / speed)); + +} +EXPORT_SYMBOL(dibx000_i2c_set_speed); + +static u32 dibx000_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst, + enum dibx000_i2c_interface intf) +{ + if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) { + dprintk("selecting interface: %d", intf); + mst->selected_interface = intf; + return dibx000_write_word(mst, mst->base_reg + 4, intf); + } + return 0; +} + +static int dibx000_i2c_master_xfer_gpio12(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + int msg_index; + int ret = 0; + + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_1_2); + for (msg_index = 0; msg_index < num; msg_index++) { + if (msg[msg_index].flags & I2C_M_RD) { + ret = dibx000_master_i2c_read(mst, &msg[msg_index]); + if (ret != 0) + return 0; + } else { + ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1); + if (ret != 0) + return 0; + } + } + + return num; +} + +static int dibx000_i2c_master_xfer_gpio34(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + int msg_index; + int ret = 0; + + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_3_4); + for (msg_index = 0; msg_index < num; msg_index++) { + if (msg[msg_index].flags & I2C_M_RD) { + ret = dibx000_master_i2c_read(mst, &msg[msg_index]); + if (ret != 0) + return 0; + } else { + ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1); + if (ret != 0) + return 0; + } + } + + return num; +} + +static struct i2c_algorithm dibx000_i2c_master_gpio12_xfer_algo = { + .master_xfer = dibx000_i2c_master_xfer_gpio12, + .functionality = dibx000_i2c_func, +}; + +static struct i2c_algorithm dibx000_i2c_master_gpio34_xfer_algo = { + .master_xfer = dibx000_i2c_master_xfer_gpio34, + .functionality = dibx000_i2c_func, +}; + +static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], + u8 addr, int onoff) +{ + u16 val; + + + if (onoff) + val = addr << 8; // bit 7 = use master or not, if 0, the gate is open + else + val = 1 << 7; + + if (mst->device_rev > DIB7000) + val <<= 1; + + tx[0] = (((mst->base_reg + 1) >> 8) & 0xff); + tx[1] = ((mst->base_reg + 1) & 0xff); + tx[2] = val >> 8; + tx[3] = val & 0xff; + + return 0; +} + +static int dibx000_i2c_gated_gpio67_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + int ret; + + if (num > 32) { + dprintk("%s: too much I2C message to be transmitted (%i).\ + Maximum is 32", __func__, num); + return -ENOMEM; + } + + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_6_7); + + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + + memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num)); + + /* open the gate */ + dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1); + mst->msg[0].addr = mst->i2c_addr; + mst->msg[0].buf = &mst->i2c_write_buffer[0]; + mst->msg[0].len = 4; + + memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num); + + /* close the gate */ + dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0); + mst->msg[num + 1].addr = mst->i2c_addr; + mst->msg[num + 1].buf = &mst->i2c_write_buffer[4]; + mst->msg[num + 1].len = 4; + + ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ? + num : -EIO); + + mutex_unlock(&mst->i2c_buffer_lock); + return ret; +} + +static struct i2c_algorithm dibx000_i2c_gated_gpio67_algo = { + .master_xfer = dibx000_i2c_gated_gpio67_xfer, + .functionality = dibx000_i2c_func, +}; + +static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + int ret; + + if (num > 32) { + dprintk("%s: too much I2C message to be transmitted (%i).\ + Maximum is 32", __func__, num); + return -ENOMEM; + } + + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER); + + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num)); + + /* open the gate */ + dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1); + mst->msg[0].addr = mst->i2c_addr; + mst->msg[0].buf = &mst->i2c_write_buffer[0]; + mst->msg[0].len = 4; + + memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num); + + /* close the gate */ + dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0); + mst->msg[num + 1].addr = mst->i2c_addr; + mst->msg[num + 1].buf = &mst->i2c_write_buffer[4]; + mst->msg[num + 1].len = 4; + + ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ? + num : -EIO); + mutex_unlock(&mst->i2c_buffer_lock); + return ret; +} + +static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = { + .master_xfer = dibx000_i2c_gated_tuner_xfer, + .functionality = dibx000_i2c_func, +}; + +struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, + enum dibx000_i2c_interface intf, + int gating) +{ + struct i2c_adapter *i2c = NULL; + + switch (intf) { + case DIBX000_I2C_INTERFACE_TUNER: + if (gating) + i2c = &mst->gated_tuner_i2c_adap; + break; + case DIBX000_I2C_INTERFACE_GPIO_1_2: + if (!gating) + i2c = &mst->master_i2c_adap_gpio12; + break; + case DIBX000_I2C_INTERFACE_GPIO_3_4: + if (!gating) + i2c = &mst->master_i2c_adap_gpio34; + break; + case DIBX000_I2C_INTERFACE_GPIO_6_7: + if (gating) + i2c = &mst->master_i2c_adap_gpio67; + break; + default: + printk(KERN_ERR "DiBX000: incorrect I2C interface selected\n"); + break; + } + + return i2c; +} + +EXPORT_SYMBOL(dibx000_get_i2c_adapter); + +void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst) +{ + /* initialize the i2c-master by closing the gate */ + u8 tx[4]; + struct i2c_msg m = {.addr = mst->i2c_addr,.buf = tx,.len = 4 }; + + dibx000_i2c_gate_ctrl(mst, tx, 0, 0); + i2c_transfer(mst->i2c_adap, &m, 1); + mst->selected_interface = 0xff; // the first time force a select of the I2C + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER); +} + +EXPORT_SYMBOL(dibx000_reset_i2c_master); + +static int i2c_adapter_init(struct i2c_adapter *i2c_adap, + struct i2c_algorithm *algo, const char *name, + struct dibx000_i2c_master *mst) +{ + strncpy(i2c_adap->name, name, sizeof(i2c_adap->name)); + i2c_adap->algo = algo; + i2c_adap->algo_data = NULL; + i2c_set_adapdata(i2c_adap, mst); + if (i2c_add_adapter(i2c_adap) < 0) + return -ENODEV; + return 0; +} + +int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, + struct i2c_adapter *i2c_adap, u8 i2c_addr) +{ + int ret; + + mutex_init(&mst->i2c_buffer_lock); + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock"); + return -EINVAL; + } + memset(mst->msg, 0, sizeof(struct i2c_msg)); + mst->msg[0].addr = i2c_addr >> 1; + mst->msg[0].flags = 0; + mst->msg[0].buf = mst->i2c_write_buffer; + mst->msg[0].len = 4; + + mst->device_rev = device_rev; + mst->i2c_adap = i2c_adap; + mst->i2c_addr = i2c_addr >> 1; + + if (device_rev == DIB7000P || device_rev == DIB8000) + mst->base_reg = 1024; + else + mst->base_reg = 768; + + mst->gated_tuner_i2c_adap.dev.parent = mst->i2c_adap->dev.parent; + if (i2c_adapter_init + (&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo, + "DiBX000 tuner I2C bus", mst) != 0) + printk(KERN_ERR + "DiBX000: could not initialize the tuner i2c_adapter\n"); + + mst->master_i2c_adap_gpio12.dev.parent = mst->i2c_adap->dev.parent; + if (i2c_adapter_init + (&mst->master_i2c_adap_gpio12, &dibx000_i2c_master_gpio12_xfer_algo, + "DiBX000 master GPIO12 I2C bus", mst) != 0) + printk(KERN_ERR + "DiBX000: could not initialize the master i2c_adapter\n"); + + mst->master_i2c_adap_gpio34.dev.parent = mst->i2c_adap->dev.parent; + if (i2c_adapter_init + (&mst->master_i2c_adap_gpio34, &dibx000_i2c_master_gpio34_xfer_algo, + "DiBX000 master GPIO34 I2C bus", mst) != 0) + printk(KERN_ERR + "DiBX000: could not initialize the master i2c_adapter\n"); + + mst->master_i2c_adap_gpio67.dev.parent = mst->i2c_adap->dev.parent; + if (i2c_adapter_init + (&mst->master_i2c_adap_gpio67, &dibx000_i2c_gated_gpio67_algo, + "DiBX000 master GPIO67 I2C bus", mst) != 0) + printk(KERN_ERR + "DiBX000: could not initialize the master i2c_adapter\n"); + + /* initialize the i2c-master by closing the gate */ + dibx000_i2c_gate_ctrl(mst, mst->i2c_write_buffer, 0, 0); + + ret = (i2c_transfer(i2c_adap, mst->msg, 1) == 1); + mutex_unlock(&mst->i2c_buffer_lock); + + return ret; +} + +EXPORT_SYMBOL(dibx000_init_i2c_master); + +void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst) +{ + i2c_del_adapter(&mst->gated_tuner_i2c_adap); + i2c_del_adapter(&mst->master_i2c_adap_gpio12); + i2c_del_adapter(&mst->master_i2c_adap_gpio34); + i2c_del_adapter(&mst->master_i2c_adap_gpio67); +} +EXPORT_SYMBOL(dibx000_exit_i2c_master); + + +u32 systime(void) +{ + struct timespec t; + + t = current_kernel_time(); + return (t.tv_sec * 10000) + (t.tv_nsec / 100000); +} +EXPORT_SYMBOL(systime); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Common function the DiBcom demodulator family"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dibx000_common.h b/drivers/media/dvb-frontends/dibx000_common.h new file mode 100644 index 00000000..b538e055 --- /dev/null +++ b/drivers/media/dvb-frontends/dibx000_common.h @@ -0,0 +1,281 @@ +#ifndef DIBX000_COMMON_H +#define DIBX000_COMMON_H + +enum dibx000_i2c_interface { + DIBX000_I2C_INTERFACE_TUNER = 0, + DIBX000_I2C_INTERFACE_GPIO_1_2 = 1, + DIBX000_I2C_INTERFACE_GPIO_3_4 = 2, + DIBX000_I2C_INTERFACE_GPIO_6_7 = 3 +}; + +struct dibx000_i2c_master { +#define DIB3000MC 1 +#define DIB7000 2 +#define DIB7000P 11 +#define DIB7000MC 12 +#define DIB8000 13 + u16 device_rev; + + enum dibx000_i2c_interface selected_interface; + +/* struct i2c_adapter tuner_i2c_adap; */ + struct i2c_adapter gated_tuner_i2c_adap; + struct i2c_adapter master_i2c_adap_gpio12; + struct i2c_adapter master_i2c_adap_gpio34; + struct i2c_adapter master_i2c_adap_gpio67; + + struct i2c_adapter *i2c_adap; + u8 i2c_addr; + + u16 base_reg; + + /* for the I2C transfer */ + struct i2c_msg msg[34]; + u8 i2c_write_buffer[8]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; +}; + +extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, + u16 device_rev, struct i2c_adapter *i2c_adap, + u8 i2c_addr); +extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master + *mst, + enum dibx000_i2c_interface + intf, int gating); +extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst); +extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst); +extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed); + +extern u32 systime(void); + +#define BAND_LBAND 0x01 +#define BAND_UHF 0x02 +#define BAND_VHF 0x04 +#define BAND_SBAND 0x08 +#define BAND_FM 0x10 +#define BAND_CBAND 0x20 + +#define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \ + (freq_kHz) <= 115000 ? BAND_FM : \ + (freq_kHz) <= 250000 ? BAND_VHF : \ + (freq_kHz) <= 863000 ? BAND_UHF : \ + (freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND ) + +struct dibx000_agc_config { + /* defines the capabilities of this AGC-setting - using the BAND_-defines */ + u8 band_caps; + + u16 setup; + + u16 inv_gain; + u16 time_stabiliz; + + u8 alpha_level; + u16 thlock; + + u8 wbd_inv; + u16 wbd_ref; + u8 wbd_sel; + u8 wbd_alpha; + + u16 agc1_max; + u16 agc1_min; + u16 agc2_max; + u16 agc2_min; + + u8 agc1_pt1; + u8 agc1_pt2; + u8 agc1_pt3; + + u8 agc1_slope1; + u8 agc1_slope2; + + u8 agc2_pt1; + u8 agc2_pt2; + + u8 agc2_slope1; + u8 agc2_slope2; + + u8 alpha_mant; + u8 alpha_exp; + + u8 beta_mant; + u8 beta_exp; + + u8 perform_agc_softsplit; + + struct { + u16 min; + u16 max; + u16 min_thres; + u16 max_thres; + } split; +}; + +struct dibx000_bandwidth_config { + u32 internal; + u32 sampling; + + u8 pll_prediv; + u8 pll_ratio; + u8 pll_range; + u8 pll_reset; + u8 pll_bypass; + + u8 enable_refdiv; + u8 bypclk_div; + u8 IO_CLK_en_core; + u8 ADClkSrc; + u8 modulo; + + u16 sad_cfg; + + u32 ifreq; + u32 timf; + + u32 xtal_hz; +}; + +enum dibx000_adc_states { + DIBX000_SLOW_ADC_ON = 0, + DIBX000_SLOW_ADC_OFF, + DIBX000_ADC_ON, + DIBX000_ADC_OFF, + DIBX000_VBG_ENABLE, + DIBX000_VBG_DISABLE, +}; + +#define BANDWIDTH_TO_KHZ(v) ((v) / 1000) +#define BANDWIDTH_TO_HZ(v) ((v) * 1000) + +/* Chip output mode. */ +#define OUTMODE_HIGH_Z 0 +#define OUTMODE_MPEG2_PAR_GATED_CLK 1 +#define OUTMODE_MPEG2_PAR_CONT_CLK 2 +#define OUTMODE_MPEG2_SERIAL 7 +#define OUTMODE_DIVERSITY 4 +#define OUTMODE_MPEG2_FIFO 5 +#define OUTMODE_ANALOG_ADC 6 + +#define INPUT_MODE_OFF 0x11 +#define INPUT_MODE_DIVERSITY 0x12 +#define INPUT_MODE_MPEG 0x13 + +enum frontend_tune_state { + CT_TUNER_START = 10, + CT_TUNER_STEP_0, + CT_TUNER_STEP_1, + CT_TUNER_STEP_2, + CT_TUNER_STEP_3, + CT_TUNER_STEP_4, + CT_TUNER_STEP_5, + CT_TUNER_STEP_6, + CT_TUNER_STEP_7, + CT_TUNER_STOP, + + CT_AGC_START = 20, + CT_AGC_STEP_0, + CT_AGC_STEP_1, + CT_AGC_STEP_2, + CT_AGC_STEP_3, + CT_AGC_STEP_4, + CT_AGC_STOP, + + CT_DEMOD_START = 30, + CT_DEMOD_STEP_1, + CT_DEMOD_STEP_2, + CT_DEMOD_STEP_3, + CT_DEMOD_STEP_4, + CT_DEMOD_STEP_5, + CT_DEMOD_STEP_6, + CT_DEMOD_STEP_7, + CT_DEMOD_STEP_8, + CT_DEMOD_STEP_9, + CT_DEMOD_STEP_10, + CT_DEMOD_STEP_11, + CT_DEMOD_SEARCH_NEXT = 51, + CT_DEMOD_STEP_LOCKED, + CT_DEMOD_STOP, + + CT_DONE = 100, + CT_SHUTDOWN, + +}; + +struct dvb_frontend_parametersContext { +#define CHANNEL_STATUS_PARAMETERS_UNKNOWN 0x01 +#define CHANNEL_STATUS_PARAMETERS_SET 0x02 + u8 status; + u32 tune_time_estimation[2]; + s32 tps_available; + u16 tps[9]; +}; + +#define FE_STATUS_TUNE_FAILED 0 +#define FE_STATUS_TUNE_TIMED_OUT -1 +#define FE_STATUS_TUNE_TIME_TOO_SHORT -2 +#define FE_STATUS_TUNE_PENDING -3 +#define FE_STATUS_STD_SUCCESS -4 +#define FE_STATUS_FFT_SUCCESS -5 +#define FE_STATUS_DEMOD_SUCCESS -6 +#define FE_STATUS_LOCKED -7 +#define FE_STATUS_DATA_LOCKED -8 + +#define FE_CALLBACK_TIME_NEVER 0xffffffff + +#define ABS(x) ((x < 0) ? (-x) : (x)) + +#define DATA_BUS_ACCESS_MODE_8BIT 0x01 +#define DATA_BUS_ACCESS_MODE_16BIT 0x02 +#define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10 + +struct dibGPIOFunction { +#define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1 +#define BOARD_GPIO_COMPONENT_DEMOD 2 + u8 component; + +#define BOARD_GPIO_FUNCTION_BOARD_ON 1 +#define BOARD_GPIO_FUNCTION_BOARD_OFF 2 +#define BOARD_GPIO_FUNCTION_COMPONENT_ON 3 +#define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4 +#define BOARD_GPIO_FUNCTION_SUBBAND_PWM 5 +#define BOARD_GPIO_FUNCTION_SUBBAND_GPIO 6 + u8 function; + +/* mask, direction and value are used specify which GPIO to change GPIO0 + * is LSB and possible GPIO31 is MSB. The same bit-position as in the + * mask is used for the direction and the value. Direction == 1 is OUT, + * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN + * value has no meaning. + * + * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be + * used to do the PWM. Direction gives the PWModulator to be used. + * Value gives the PWM value in device-dependent scale. + */ + u32 mask; + u32 direction; + u32 value; +}; + +#define MAX_NB_SUBBANDS 8 +struct dibSubbandSelection { + u8 size; /* Actual number of subbands. */ + struct { + u16 f_mhz; + struct dibGPIOFunction gpio; + } subband[MAX_NB_SUBBANDS]; +}; + +#define DEMOD_TIMF_SET 0x00 +#define DEMOD_TIMF_GET 0x01 +#define DEMOD_TIMF_UPDATE 0x02 + +#define MPEG_ON_DIBTX 1 +#define DIV_ON_DIBTX 2 +#define ADC_ON_DIBTX 3 +#define DEMOUT_ON_HOSTBUS 4 +#define DIBTX_ON_HOSTBUS 5 +#define MPEG_ON_HOSTBUS 6 + +#endif diff --git a/drivers/media/dvb-frontends/drxd.h b/drivers/media/dvb-frontends/drxd.h new file mode 100644 index 00000000..5f1d6b5f --- /dev/null +++ b/drivers/media/dvb-frontends/drxd.h @@ -0,0 +1,73 @@ +/* + * drxd.h: DRXD DVB-T demodulator driver + * + * Copyright (C) 2005-2007 Micronas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef _DRXD_H_ +#define _DRXD_H_ + +#include +#include +#include + +struct drxd_config { + u8 index; + + u8 pll_address; + u8 pll_type; +#define DRXD_PLL_NONE 0 +#define DRXD_PLL_DTT7520X 1 +#define DRXD_PLL_MT3X0823 2 + + u32 clock; + u8 insert_rs_byte; + + u8 demod_address; + u8 demoda_address; + u8 demod_revision; + + /* If the tuner is not behind an i2c gate, be sure to flip this bit + or else the i2c bus could get wedged */ + u8 disable_i2c_gate_ctrl; + + u32 IF; + s16(*osc_deviation) (void *priv, s16 dev, int flag); +}; + +#if IS_ENABLED(CONFIG_DVB_DRXD) +extern +struct dvb_frontend *drxd_attach(const struct drxd_config *config, + void *priv, struct i2c_adapter *i2c, + struct device *dev); +#else +static inline +struct dvb_frontend *drxd_attach(const struct drxd_config *config, + void *priv, struct i2c_adapter *i2c, + struct device *dev) +{ + printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", + __func__); + return NULL; +} +#endif + +extern int drxd_config_i2c(struct dvb_frontend *, int); +#endif diff --git a/drivers/media/dvb-frontends/drxd_firm.c b/drivers/media/dvb-frontends/drxd_firm.c new file mode 100644 index 00000000..5418b0b1 --- /dev/null +++ b/drivers/media/dvb-frontends/drxd_firm.c @@ -0,0 +1,929 @@ +/* + * drxd_firm.c : DRXD firmware tables + * + * Copyright (C) 2006-2007 Micronas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +/* TODO: generate this file with a script from a settings file */ + +/* Contains A2 firmware version: 1.4.2 + * Contains B1 firmware version: 3.3.33 + * Contains settings from driver 1.4.23 +*/ + +#include "drxd_firm.h" + +#define ADDRESS(x) ((x) & 0xFF), (((x)>>8) & 0xFF), (((x)>>16) & 0xFF), (((x)>>24) & 0xFF) +#define LENGTH(x) ((x) & 0xFF), (((x)>>8) & 0xFF) + +/* Is written via block write, must be little endian */ +#define DATA16(x) ((x) & 0xFF), (((x)>>8) & 0xFF) + +#define WRBLOCK(a, l) ADDRESS(a), LENGTH(l) +#define WR16(a, d) ADDRESS(a), LENGTH(1), DATA16(d) + +#define END_OF_TABLE 0xFF, 0xFF, 0xFF, 0xFF + +/* HI firmware patches */ + +#define HI_TR_FUNC_ADDR HI_IF_RAM_USR_BEGIN__A +#define HI_TR_FUNC_SIZE 9 /* size of this function in instruction words */ + +u8 DRXD_InitAtomicRead[] = { + WRBLOCK(HI_TR_FUNC_ADDR, HI_TR_FUNC_SIZE), + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0x60, 0x04, /* r0rami.dt -> ring.xba; */ + 0x61, 0x04, /* r0rami.dt -> ring.xad; */ + 0xE3, 0x07, /* HI_RA_RAM_USR_BEGIN -> ring.iad; */ + 0x40, 0x00, /* (long immediate) */ + 0x64, 0x04, /* r0rami.dt -> ring.len; */ + 0x65, 0x04, /* r0rami.dt -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0x38, 0x00, /* 0 -> jumps.ad; */ + END_OF_TABLE +}; + +/* Pins D0 and D1 of the parallel MPEG output can be used + to set the I2C address of a device. */ + +#define HI_RST_FUNC_ADDR (HI_IF_RAM_USR_BEGIN__A + HI_TR_FUNC_SIZE) +#define HI_RST_FUNC_SIZE 54 /* size of this function in instruction words */ + +/* D0 Version */ +u8 DRXD_HiI2cPatch_1[] = { + WRBLOCK(HI_RST_FUNC_ADDR, HI_RST_FUNC_SIZE), + 0xC8, 0x07, 0x01, 0x00, /* MASK -> reg0.dt; */ + 0xE0, 0x07, 0x15, 0x02, /* (EC__BLK << 6) + EC_OC_REG__BNK -> ring.xba; */ + 0xE1, 0x07, 0x12, 0x00, /* EC_OC_REG_OC_MPG_SIO__A -> ring.xad; */ + 0xA2, 0x00, /* M_BNK_ID_DAT -> ring.iba; */ + 0x23, 0x00, /* &data -> ring.iad; */ + 0x24, 0x00, /* 0 -> ring.len; */ + 0xA5, 0x02, /* M_RC_CTR_SWAP | M_RC_CTR_READ -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0x42, 0x00, /* &data+1 -> w0ram.ad; */ + 0xC0, 0x07, 0xFF, 0x0F, /* -1 -> w0ram.dt; */ + 0x63, 0x00, /* &data+1 -> ring.iad; */ + 0x65, 0x02, /* M_RC_CTR_SWAP | M_RC_CTR_WRITE -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0xE1, 0x07, 0x38, 0x00, /* EC_OC_REG_OCR_MPG_USR_DAT__A -> ring.xad; */ + 0xA5, 0x02, /* M_RC_CTR_SWAP | M_RC_CTR_READ -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0xE1, 0x07, 0x12, 0x00, /* EC_OC_REG_OC_MPG_SIO__A -> ring.xad; */ + 0x23, 0x00, /* &data -> ring.iad; */ + 0x65, 0x02, /* M_RC_CTR_SWAP | M_RC_CTR_WRITE -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0x42, 0x00, /* &data+1 -> w0ram.ad; */ + 0x0F, 0x04, /* r0ram.dt -> and.op; */ + 0x1C, 0x06, /* reg0.dt -> and.tr; */ + 0xCF, 0x04, /* and.rs -> add.op; */ + 0xD0, 0x07, 0x70, 0x00, /* DEF_DEV_ID -> add.tr; */ + 0xD0, 0x04, /* add.rs -> add.tr; */ + 0xC8, 0x04, /* add.rs -> reg0.dt; */ + 0x60, 0x00, /* reg0.dt -> w0ram.dt; */ + 0xC2, 0x07, 0x10, 0x00, /* SLV0_BASE -> w0rami.ad; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x01, 0x06, /* reg0.dt -> w0rami.dt; */ + 0xC2, 0x07, 0x20, 0x00, /* SLV1_BASE -> w0rami.ad; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x01, 0x06, /* reg0.dt -> w0rami.dt; */ + 0xC2, 0x07, 0x30, 0x00, /* CMD_BASE -> w0rami.ad; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x68, 0x00, /* M_IC_SEL_PT1 -> i2c.sel; */ + 0x29, 0x00, /* M_IC_CMD_RESET -> i2c.cmd; */ + 0x28, 0x00, /* M_IC_SEL_PT0 -> i2c.sel; */ + 0x29, 0x00, /* M_IC_CMD_RESET -> i2c.cmd; */ + 0xF8, 0x07, 0x2F, 0x00, /* 0x2F -> jumps.ad; */ + + WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 0) + 1)), + (u16) (HI_RST_FUNC_ADDR & 0x3FF)), + WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 1) + 1)), + (u16) (HI_RST_FUNC_ADDR & 0x3FF)), + WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 2) + 1)), + (u16) (HI_RST_FUNC_ADDR & 0x3FF)), + WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 3) + 1)), + (u16) (HI_RST_FUNC_ADDR & 0x3FF)), + + /* Force quick and dirty reset */ + WR16(B_HI_CT_REG_COMM_STATE__A, 0), + END_OF_TABLE +}; + +/* D0,D1 Version */ +u8 DRXD_HiI2cPatch_3[] = { + WRBLOCK(HI_RST_FUNC_ADDR, HI_RST_FUNC_SIZE), + 0xC8, 0x07, 0x03, 0x00, /* MASK -> reg0.dt; */ + 0xE0, 0x07, 0x15, 0x02, /* (EC__BLK << 6) + EC_OC_REG__BNK -> ring.xba; */ + 0xE1, 0x07, 0x12, 0x00, /* EC_OC_REG_OC_MPG_SIO__A -> ring.xad; */ + 0xA2, 0x00, /* M_BNK_ID_DAT -> ring.iba; */ + 0x23, 0x00, /* &data -> ring.iad; */ + 0x24, 0x00, /* 0 -> ring.len; */ + 0xA5, 0x02, /* M_RC_CTR_SWAP | M_RC_CTR_READ -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0x42, 0x00, /* &data+1 -> w0ram.ad; */ + 0xC0, 0x07, 0xFF, 0x0F, /* -1 -> w0ram.dt; */ + 0x63, 0x00, /* &data+1 -> ring.iad; */ + 0x65, 0x02, /* M_RC_CTR_SWAP | M_RC_CTR_WRITE -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0xE1, 0x07, 0x38, 0x00, /* EC_OC_REG_OCR_MPG_USR_DAT__A -> ring.xad; */ + 0xA5, 0x02, /* M_RC_CTR_SWAP | M_RC_CTR_READ -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0xE1, 0x07, 0x12, 0x00, /* EC_OC_REG_OC_MPG_SIO__A -> ring.xad; */ + 0x23, 0x00, /* &data -> ring.iad; */ + 0x65, 0x02, /* M_RC_CTR_SWAP | M_RC_CTR_WRITE -> ring.ctl; */ + 0x26, 0x00, /* 0 -> ring.rdy; */ + 0x42, 0x00, /* &data+1 -> w0ram.ad; */ + 0x0F, 0x04, /* r0ram.dt -> and.op; */ + 0x1C, 0x06, /* reg0.dt -> and.tr; */ + 0xCF, 0x04, /* and.rs -> add.op; */ + 0xD0, 0x07, 0x70, 0x00, /* DEF_DEV_ID -> add.tr; */ + 0xD0, 0x04, /* add.rs -> add.tr; */ + 0xC8, 0x04, /* add.rs -> reg0.dt; */ + 0x60, 0x00, /* reg0.dt -> w0ram.dt; */ + 0xC2, 0x07, 0x10, 0x00, /* SLV0_BASE -> w0rami.ad; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x01, 0x06, /* reg0.dt -> w0rami.dt; */ + 0xC2, 0x07, 0x20, 0x00, /* SLV1_BASE -> w0rami.ad; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x01, 0x06, /* reg0.dt -> w0rami.dt; */ + 0xC2, 0x07, 0x30, 0x00, /* CMD_BASE -> w0rami.ad; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x01, 0x00, /* 0 -> w0rami.dt; */ + 0x68, 0x00, /* M_IC_SEL_PT1 -> i2c.sel; */ + 0x29, 0x00, /* M_IC_CMD_RESET -> i2c.cmd; */ + 0x28, 0x00, /* M_IC_SEL_PT0 -> i2c.sel; */ + 0x29, 0x00, /* M_IC_CMD_RESET -> i2c.cmd; */ + 0xF8, 0x07, 0x2F, 0x00, /* 0x2F -> jumps.ad; */ + + WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 0) + 1)), + (u16) (HI_RST_FUNC_ADDR & 0x3FF)), + WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 1) + 1)), + (u16) (HI_RST_FUNC_ADDR & 0x3FF)), + WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 2) + 1)), + (u16) (HI_RST_FUNC_ADDR & 0x3FF)), + WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 3) + 1)), + (u16) (HI_RST_FUNC_ADDR & 0x3FF)), + + /* Force quick and dirty reset */ + WR16(B_HI_CT_REG_COMM_STATE__A, 0), + END_OF_TABLE +}; + +u8 DRXD_ResetCEFR[] = { + WRBLOCK(CE_REG_FR_TREAL00__A, 57), + 0x52, 0x00, /* CE_REG_FR_TREAL00__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG00__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL01__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG01__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL02__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG02__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL03__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG03__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL04__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG04__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL05__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG05__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL06__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG06__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL07__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG07__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL08__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG08__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL09__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG09__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL10__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG10__A */ + 0x52, 0x00, /* CE_REG_FR_TREAL11__A */ + 0x00, 0x00, /* CE_REG_FR_TIMAG11__A */ + + 0x52, 0x00, /* CE_REG_FR_MID_TAP__A */ + + 0x0B, 0x00, /* CE_REG_FR_SQS_G00__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G01__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G02__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G03__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G04__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G05__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G06__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G07__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G08__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G09__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G10__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G11__A */ + 0x0B, 0x00, /* CE_REG_FR_SQS_G12__A */ + + 0xFF, 0x01, /* CE_REG_FR_RIO_G00__A */ + 0x90, 0x01, /* CE_REG_FR_RIO_G01__A */ + 0x0B, 0x01, /* CE_REG_FR_RIO_G02__A */ + 0xC8, 0x00, /* CE_REG_FR_RIO_G03__A */ + 0xA0, 0x00, /* CE_REG_FR_RIO_G04__A */ + 0x85, 0x00, /* CE_REG_FR_RIO_G05__A */ + 0x72, 0x00, /* CE_REG_FR_RIO_G06__A */ + 0x64, 0x00, /* CE_REG_FR_RIO_G07__A */ + 0x59, 0x00, /* CE_REG_FR_RIO_G08__A */ + 0x50, 0x00, /* CE_REG_FR_RIO_G09__A */ + 0x49, 0x00, /* CE_REG_FR_RIO_G10__A */ + + 0x10, 0x00, /* CE_REG_FR_MODE__A */ + 0x78, 0x00, /* CE_REG_FR_SQS_TRH__A */ + 0x00, 0x00, /* CE_REG_FR_RIO_GAIN__A */ + 0x00, 0x02, /* CE_REG_FR_BYPASS__A */ + 0x0D, 0x00, /* CE_REG_FR_PM_SET__A */ + 0x07, 0x00, /* CE_REG_FR_ERR_SH__A */ + 0x04, 0x00, /* CE_REG_FR_MAN_SH__A */ + 0x06, 0x00, /* CE_REG_FR_TAP_SH__A */ + + END_OF_TABLE +}; + +u8 DRXD_InitFEA2_1[] = { + WRBLOCK(FE_AD_REG_PD__A, 3), + 0x00, 0x00, /* FE_AD_REG_PD__A */ + 0x01, 0x00, /* FE_AD_REG_INVEXT__A */ + 0x00, 0x00, /* FE_AD_REG_CLKNEG__A */ + + WRBLOCK(FE_AG_REG_DCE_AUR_CNT__A, 2), + 0x10, 0x00, /* FE_AG_REG_DCE_AUR_CNT__A */ + 0x10, 0x00, /* FE_AG_REG_DCE_RUR_CNT__A */ + + WRBLOCK(FE_AG_REG_ACE_AUR_CNT__A, 2), + 0x0E, 0x00, /* FE_AG_REG_ACE_AUR_CNT__A */ + 0x00, 0x00, /* FE_AG_REG_ACE_RUR_CNT__A */ + + WRBLOCK(FE_AG_REG_EGC_FLA_RGN__A, 5), + 0x04, 0x00, /* FE_AG_REG_EGC_FLA_RGN__A */ + 0x1F, 0x00, /* FE_AG_REG_EGC_SLO_RGN__A */ + 0x00, 0x00, /* FE_AG_REG_EGC_JMP_PSN__A */ + 0x00, 0x00, /* FE_AG_REG_EGC_FLA_INC__A */ + 0x00, 0x00, /* FE_AG_REG_EGC_FLA_DEC__A */ + + WRBLOCK(FE_AG_REG_GC1_AGC_MAX__A, 2), + 0xFF, 0x01, /* FE_AG_REG_GC1_AGC_MAX__A */ + 0x00, 0xFE, /* FE_AG_REG_GC1_AGC_MIN__A */ + + WRBLOCK(FE_AG_REG_IND_WIN__A, 29), + 0x00, 0x00, /* FE_AG_REG_IND_WIN__A */ + 0x05, 0x00, /* FE_AG_REG_IND_THD_LOL__A */ + 0x0F, 0x00, /* FE_AG_REG_IND_THD_HIL__A */ + 0x00, 0x00, /* FE_AG_REG_IND_DEL__A don't care */ + 0x1E, 0x00, /* FE_AG_REG_IND_PD1_WRI__A */ + 0x0C, 0x00, /* FE_AG_REG_PDA_AUR_CNT__A */ + 0x00, 0x00, /* FE_AG_REG_PDA_RUR_CNT__A */ + 0x00, 0x00, /* FE_AG_REG_PDA_AVE_DAT__A don't care */ + 0x00, 0x00, /* FE_AG_REG_PDC_RUR_CNT__A */ + 0x01, 0x00, /* FE_AG_REG_PDC_SET_LVL__A */ + 0x02, 0x00, /* FE_AG_REG_PDC_FLA_RGN__A */ + 0x00, 0x00, /* FE_AG_REG_PDC_JMP_PSN__A don't care */ + 0xFF, 0xFF, /* FE_AG_REG_PDC_FLA_STP__A */ + 0xFF, 0xFF, /* FE_AG_REG_PDC_SLO_STP__A */ + 0x00, 0x1F, /* FE_AG_REG_PDC_PD2_WRI__A don't care */ + 0x00, 0x00, /* FE_AG_REG_PDC_MAP_DAT__A don't care */ + 0x02, 0x00, /* FE_AG_REG_PDC_MAX__A */ + 0x0C, 0x00, /* FE_AG_REG_TGA_AUR_CNT__A */ + 0x00, 0x00, /* FE_AG_REG_TGA_RUR_CNT__A */ + 0x00, 0x00, /* FE_AG_REG_TGA_AVE_DAT__A don't care */ + 0x00, 0x00, /* FE_AG_REG_TGC_RUR_CNT__A */ + 0x22, 0x00, /* FE_AG_REG_TGC_SET_LVL__A */ + 0x15, 0x00, /* FE_AG_REG_TGC_FLA_RGN__A */ + 0x00, 0x00, /* FE_AG_REG_TGC_JMP_PSN__A don't care */ + 0x01, 0x00, /* FE_AG_REG_TGC_FLA_STP__A */ + 0x0A, 0x00, /* FE_AG_REG_TGC_SLO_STP__A */ + 0x00, 0x00, /* FE_AG_REG_TGC_MAP_DAT__A don't care */ + 0x10, 0x00, /* FE_AG_REG_FGA_AUR_CNT__A */ + 0x10, 0x00, /* FE_AG_REG_FGA_RUR_CNT__A */ + + WRBLOCK(FE_AG_REG_BGC_FGC_WRI__A, 2), + 0x00, 0x00, /* FE_AG_REG_BGC_FGC_WRI__A */ + 0x00, 0x00, /* FE_AG_REG_BGC_CGC_WRI__A */ + + WRBLOCK(FE_FD_REG_SCL__A, 3), + 0x05, 0x00, /* FE_FD_REG_SCL__A */ + 0x03, 0x00, /* FE_FD_REG_MAX_LEV__A */ + 0x05, 0x00, /* FE_FD_REG_NR__A */ + + WRBLOCK(FE_CF_REG_SCL__A, 5), + 0x16, 0x00, /* FE_CF_REG_SCL__A */ + 0x04, 0x00, /* FE_CF_REG_MAX_LEV__A */ + 0x06, 0x00, /* FE_CF_REG_NR__A */ + 0x00, 0x00, /* FE_CF_REG_IMP_VAL__A */ + 0x01, 0x00, /* FE_CF_REG_MEAS_VAL__A */ + + WRBLOCK(FE_CU_REG_FRM_CNT_RST__A, 2), + 0x00, 0x08, /* FE_CU_REG_FRM_CNT_RST__A */ + 0x00, 0x00, /* FE_CU_REG_FRM_CNT_STR__A */ + + END_OF_TABLE +}; + + /* with PGA */ +/* WR16COND( DRXD_WITH_PGA, FE_AG_REG_AG_PGA_MODE__A , 0x0004), */ + /* without PGA */ +/* WR16COND( DRXD_WITHOUT_PGA, FE_AG_REG_AG_PGA_MODE__A , 0x0001), */ +/* WR16(FE_AG_REG_AG_AGC_SIO__A, (extAttr -> FeAgRegAgAgcSio), 0x0000 );*/ +/* WR16(FE_AG_REG_AG_PWD__A ,(extAttr -> FeAgRegAgPwd), 0x0000 );*/ + +u8 DRXD_InitFEA2_2[] = { + WR16(FE_AG_REG_CDR_RUR_CNT__A, 0x0010), + WR16(FE_AG_REG_FGM_WRI__A, 48), + /* Activate measurement, activate scale */ + WR16(FE_FD_REG_MEAS_VAL__A, 0x0001), + + WR16(FE_CU_REG_COMM_EXEC__A, 0x0001), + WR16(FE_CF_REG_COMM_EXEC__A, 0x0001), + WR16(FE_IF_REG_COMM_EXEC__A, 0x0001), + WR16(FE_FD_REG_COMM_EXEC__A, 0x0001), + WR16(FE_FS_REG_COMM_EXEC__A, 0x0001), + WR16(FE_AD_REG_COMM_EXEC__A, 0x0001), + WR16(FE_AG_REG_COMM_EXEC__A, 0x0001), + WR16(FE_AG_REG_AG_MODE_LOP__A, 0x895E), + + END_OF_TABLE +}; + +u8 DRXD_InitFEB1_1[] = { + WR16(B_FE_AD_REG_PD__A, 0x0000), + WR16(B_FE_AD_REG_CLKNEG__A, 0x0000), + WR16(B_FE_AG_REG_BGC_FGC_WRI__A, 0x0000), + WR16(B_FE_AG_REG_BGC_CGC_WRI__A, 0x0000), + WR16(B_FE_AG_REG_AG_MODE_LOP__A, 0x000a), + WR16(B_FE_AG_REG_IND_PD1_WRI__A, 35), + WR16(B_FE_AG_REG_IND_WIN__A, 0), + WR16(B_FE_AG_REG_IND_THD_LOL__A, 8), + WR16(B_FE_AG_REG_IND_THD_HIL__A, 8), + WR16(B_FE_CF_REG_IMP_VAL__A, 1), + WR16(B_FE_AG_REG_EGC_FLA_RGN__A, 7), + END_OF_TABLE +}; + + /* with PGA */ +/* WR16(B_FE_AG_REG_AG_PGA_MODE__A , 0x0000, 0x0000); */ + /* without PGA */ +/* WR16(B_FE_AG_REG_AG_PGA_MODE__A , + B_FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN, 0x0000);*/ + /* WR16(B_FE_AG_REG_AG_AGC_SIO__A,(extAttr -> FeAgRegAgAgcSio), 0x0000 );*//*added HS 23-05-2005 */ +/* WR16(B_FE_AG_REG_AG_PWD__A ,(extAttr -> FeAgRegAgPwd), 0x0000 );*/ + +u8 DRXD_InitFEB1_2[] = { + WR16(B_FE_COMM_EXEC__A, 0x0001), + + /* RF-AGC setup */ + WR16(B_FE_AG_REG_PDA_AUR_CNT__A, 0x0C), + WR16(B_FE_AG_REG_PDC_SET_LVL__A, 0x01), + WR16(B_FE_AG_REG_PDC_FLA_RGN__A, 0x02), + WR16(B_FE_AG_REG_PDC_FLA_STP__A, 0xFFFF), + WR16(B_FE_AG_REG_PDC_SLO_STP__A, 0xFFFF), + WR16(B_FE_AG_REG_PDC_MAX__A, 0x02), + WR16(B_FE_AG_REG_TGA_AUR_CNT__A, 0x0C), + WR16(B_FE_AG_REG_TGC_SET_LVL__A, 0x22), + WR16(B_FE_AG_REG_TGC_FLA_RGN__A, 0x15), + WR16(B_FE_AG_REG_TGC_FLA_STP__A, 0x01), + WR16(B_FE_AG_REG_TGC_SLO_STP__A, 0x0A), + + WR16(B_FE_CU_REG_DIV_NFC_CLP__A, 0), + WR16(B_FE_CU_REG_CTR_NFC_OCR__A, 25000), + WR16(B_FE_CU_REG_CTR_NFC_ICR__A, 1), + END_OF_TABLE +}; + +u8 DRXD_InitCPA2[] = { + WRBLOCK(CP_REG_BR_SPL_OFFSET__A, 2), + 0x07, 0x00, /* CP_REG_BR_SPL_OFFSET__A */ + 0x0A, 0x00, /* CP_REG_BR_STR_DEL__A */ + + WRBLOCK(CP_REG_RT_ANG_INC0__A, 4), + 0x00, 0x00, /* CP_REG_RT_ANG_INC0__A */ + 0x00, 0x00, /* CP_REG_RT_ANG_INC1__A */ + 0x03, 0x00, /* CP_REG_RT_DETECT_ENA__A */ + 0x03, 0x00, /* CP_REG_RT_DETECT_TRH__A */ + + WRBLOCK(CP_REG_AC_NEXP_OFFS__A, 5), + 0x32, 0x00, /* CP_REG_AC_NEXP_OFFS__A */ + 0x62, 0x00, /* CP_REG_AC_AVER_POW__A */ + 0x82, 0x00, /* CP_REG_AC_MAX_POW__A */ + 0x26, 0x00, /* CP_REG_AC_WEIGHT_MAN__A */ + 0x0F, 0x00, /* CP_REG_AC_WEIGHT_EXP__A */ + + WRBLOCK(CP_REG_AC_AMP_MODE__A, 2), + 0x02, 0x00, /* CP_REG_AC_AMP_MODE__A */ + 0x01, 0x00, /* CP_REG_AC_AMP_FIX__A */ + + WR16(CP_REG_INTERVAL__A, 0x0005), + WR16(CP_REG_RT_EXP_MARG__A, 0x0004), + WR16(CP_REG_AC_ANG_MODE__A, 0x0003), + + WR16(CP_REG_COMM_EXEC__A, 0x0001), + END_OF_TABLE +}; + +u8 DRXD_InitCPB1[] = { + WR16(B_CP_REG_BR_SPL_OFFSET__A, 0x0008), + WR16(B_CP_COMM_EXEC__A, 0x0001), + END_OF_TABLE +}; + +u8 DRXD_InitCEA2[] = { + WRBLOCK(CE_REG_AVG_POW__A, 4), + 0x62, 0x00, /* CE_REG_AVG_POW__A */ + 0x78, 0x00, /* CE_REG_MAX_POW__A */ + 0x62, 0x00, /* CE_REG_ATT__A */ + 0x17, 0x00, /* CE_REG_NRED__A */ + + WRBLOCK(CE_REG_NE_ERR_SELECT__A, 2), + 0x07, 0x00, /* CE_REG_NE_ERR_SELECT__A */ + 0xEB, 0xFF, /* CE_REG_NE_TD_CAL__A */ + + WRBLOCK(CE_REG_NE_MIXAVG__A, 2), + 0x06, 0x00, /* CE_REG_NE_MIXAVG__A */ + 0x00, 0x00, /* CE_REG_NE_NUPD_OFS__A */ + + WRBLOCK(CE_REG_PE_NEXP_OFFS__A, 2), + 0x00, 0x00, /* CE_REG_PE_NEXP_OFFS__A */ + 0x00, 0x00, /* CE_REG_PE_TIMESHIFT__A */ + + WRBLOCK(CE_REG_TP_A0_TAP_NEW__A, 3), + 0x00, 0x01, /* CE_REG_TP_A0_TAP_NEW__A */ + 0x01, 0x00, /* CE_REG_TP_A0_TAP_NEW_VALID__A */ + 0x0E, 0x00, /* CE_REG_TP_A0_MU_LMS_STEP__A */ + + WRBLOCK(CE_REG_TP_A1_TAP_NEW__A, 3), + 0x00, 0x00, /* CE_REG_TP_A1_TAP_NEW__A */ + 0x01, 0x00, /* CE_REG_TP_A1_TAP_NEW_VALID__A */ + 0x0A, 0x00, /* CE_REG_TP_A1_MU_LMS_STEP__A */ + + WRBLOCK(CE_REG_FI_SHT_INCR__A, 2), + 0x12, 0x00, /* CE_REG_FI_SHT_INCR__A */ + 0x0C, 0x00, /* CE_REG_FI_EXP_NORM__A */ + + WRBLOCK(CE_REG_IR_INPUTSEL__A, 3), + 0x00, 0x00, /* CE_REG_IR_INPUTSEL__A */ + 0x00, 0x00, /* CE_REG_IR_STARTPOS__A */ + 0xFF, 0x00, /* CE_REG_IR_NEXP_THRES__A */ + + WR16(CE_REG_TI_NEXP_OFFS__A, 0x0000), + + END_OF_TABLE +}; + +u8 DRXD_InitCEB1[] = { + WR16(B_CE_REG_TI_PHN_ENABLE__A, 0x0001), + WR16(B_CE_REG_FR_PM_SET__A, 0x000D), + + END_OF_TABLE +}; + +u8 DRXD_InitEQA2[] = { + WRBLOCK(EQ_REG_OT_QNT_THRES0__A, 4), + 0x1E, 0x00, /* EQ_REG_OT_QNT_THRES0__A */ + 0x1F, 0x00, /* EQ_REG_OT_QNT_THRES1__A */ + 0x06, 0x00, /* EQ_REG_OT_CSI_STEP__A */ + 0x02, 0x00, /* EQ_REG_OT_CSI_OFFSET__A */ + + WR16(EQ_REG_TD_REQ_SMB_CNT__A, 0x0200), + WR16(EQ_REG_IS_CLIP_EXP__A, 0x001F), + WR16(EQ_REG_SN_OFFSET__A, (u16) (-7)), + WR16(EQ_REG_RC_SEL_CAR__A, 0x0002), + WR16(EQ_REG_COMM_EXEC__A, 0x0001), + END_OF_TABLE +}; + +u8 DRXD_InitEQB1[] = { + WR16(B_EQ_REG_COMM_EXEC__A, 0x0001), + END_OF_TABLE +}; + +u8 DRXD_ResetECRAM[] = { + /* Reset packet sync bytes in EC_VD ram */ + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (0 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (1 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (2 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (3 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (4 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (5 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (6 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (7 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (8 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (9 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (10 * 17), 0x0000), + + /* Reset packet sync bytes in EC_RS ram */ + WR16(EC_RS_EC_RAM__A, 0x0000), + WR16(EC_RS_EC_RAM__A + 204, 0x0000), + END_OF_TABLE +}; + +u8 DRXD_InitECA2[] = { + WRBLOCK(EC_SB_REG_CSI_HI__A, 6), + 0x1F, 0x00, /* EC_SB_REG_CSI_HI__A */ + 0x1E, 0x00, /* EC_SB_REG_CSI_LO__A */ + 0x01, 0x00, /* EC_SB_REG_SMB_TGL__A */ + 0x7F, 0x00, /* EC_SB_REG_SNR_HI__A */ + 0x7F, 0x00, /* EC_SB_REG_SNR_MID__A */ + 0x7F, 0x00, /* EC_SB_REG_SNR_LO__A */ + + WRBLOCK(EC_RS_REG_REQ_PCK_CNT__A, 2), + 0x00, 0x10, /* EC_RS_REG_REQ_PCK_CNT__A */ + DATA16(EC_RS_REG_VAL_PCK), /* EC_RS_REG_VAL__A */ + + WRBLOCK(EC_OC_REG_TMD_TOP_MODE__A, 5), + 0x03, 0x00, /* EC_OC_REG_TMD_TOP_MODE__A */ + 0xF4, 0x01, /* EC_OC_REG_TMD_TOP_CNT__A */ + 0xC0, 0x03, /* EC_OC_REG_TMD_HIL_MAR__A */ + 0x40, 0x00, /* EC_OC_REG_TMD_LOL_MAR__A */ + 0x03, 0x00, /* EC_OC_REG_TMD_CUR_CNT__A */ + + WRBLOCK(EC_OC_REG_AVR_ASH_CNT__A, 2), + 0x06, 0x00, /* EC_OC_REG_AVR_ASH_CNT__A */ + 0x02, 0x00, /* EC_OC_REG_AVR_BSH_CNT__A */ + + WRBLOCK(EC_OC_REG_RCN_MODE__A, 7), + 0x07, 0x00, /* EC_OC_REG_RCN_MODE__A */ + 0x00, 0x00, /* EC_OC_REG_RCN_CRA_LOP__A */ + 0xc0, 0x00, /* EC_OC_REG_RCN_CRA_HIP__A */ + 0x00, 0x10, /* EC_OC_REG_RCN_CST_LOP__A */ + 0x00, 0x00, /* EC_OC_REG_RCN_CST_HIP__A */ + 0xFF, 0x01, /* EC_OC_REG_RCN_SET_LVL__A */ + 0x0D, 0x00, /* EC_OC_REG_RCN_GAI_LVL__A */ + + WRBLOCK(EC_OC_REG_RCN_CLP_LOP__A, 2), + 0x00, 0x00, /* EC_OC_REG_RCN_CLP_LOP__A */ + 0xC0, 0x00, /* EC_OC_REG_RCN_CLP_HIP__A */ + + WR16(EC_SB_REG_CSI_OFS__A, 0x0001), + WR16(EC_VD_REG_FORCE__A, 0x0002), + WR16(EC_VD_REG_REQ_SMB_CNT__A, 0x0001), + WR16(EC_VD_REG_RLK_ENA__A, 0x0001), + WR16(EC_OD_REG_SYNC__A, 0x0664), + WR16(EC_OC_REG_OC_MON_SIO__A, 0x0000), + WR16(EC_OC_REG_SNC_ISC_LVL__A, 0x0D0C), + /* Output zero on monitorbus pads, power saving */ + WR16(EC_OC_REG_OCR_MON_UOS__A, + (EC_OC_REG_OCR_MON_UOS_DAT_0_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_1_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_2_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_3_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_4_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_5_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_6_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_7_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_8_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_9_ENABLE | + EC_OC_REG_OCR_MON_UOS_VAL_ENABLE | + EC_OC_REG_OCR_MON_UOS_CLK_ENABLE)), + WR16(EC_OC_REG_OCR_MON_WRI__A, + EC_OC_REG_OCR_MON_WRI_INIT), + +/* CHK_ERROR(ResetECRAM(demod)); */ + /* Reset packet sync bytes in EC_VD ram */ + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (0 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (1 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (2 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (3 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (4 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (5 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (6 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (7 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (8 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (9 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (10 * 17), 0x0000), + + /* Reset packet sync bytes in EC_RS ram */ + WR16(EC_RS_EC_RAM__A, 0x0000), + WR16(EC_RS_EC_RAM__A + 204, 0x0000), + + WR16(EC_SB_REG_COMM_EXEC__A, 0x0001), + WR16(EC_VD_REG_COMM_EXEC__A, 0x0001), + WR16(EC_OD_REG_COMM_EXEC__A, 0x0001), + WR16(EC_RS_REG_COMM_EXEC__A, 0x0001), + END_OF_TABLE +}; + +u8 DRXD_InitECB1[] = { + WR16(B_EC_SB_REG_CSI_OFS0__A, 0x0001), + WR16(B_EC_SB_REG_CSI_OFS1__A, 0x0001), + WR16(B_EC_SB_REG_CSI_OFS2__A, 0x0001), + WR16(B_EC_SB_REG_CSI_LO__A, 0x000c), + WR16(B_EC_SB_REG_CSI_HI__A, 0x0018), + WR16(B_EC_SB_REG_SNR_HI__A, 0x007f), + WR16(B_EC_SB_REG_SNR_MID__A, 0x007f), + WR16(B_EC_SB_REG_SNR_LO__A, 0x007f), + + WR16(B_EC_OC_REG_DTO_CLKMODE__A, 0x0002), + WR16(B_EC_OC_REG_DTO_PER__A, 0x0006), + WR16(B_EC_OC_REG_DTO_BUR__A, 0x0001), + WR16(B_EC_OC_REG_RCR_CLKMODE__A, 0x0000), + WR16(B_EC_OC_REG_RCN_GAI_LVL__A, 0x000D), + WR16(B_EC_OC_REG_OC_MPG_SIO__A, 0x0000), + + /* Needed because shadow registers do not have correct default value */ + WR16(B_EC_OC_REG_RCN_CST_LOP__A, 0x1000), + WR16(B_EC_OC_REG_RCN_CST_HIP__A, 0x0000), + WR16(B_EC_OC_REG_RCN_CRA_LOP__A, 0x0000), + WR16(B_EC_OC_REG_RCN_CRA_HIP__A, 0x00C0), + WR16(B_EC_OC_REG_RCN_CLP_LOP__A, 0x0000), + WR16(B_EC_OC_REG_RCN_CLP_HIP__A, 0x00C0), + WR16(B_EC_OC_REG_DTO_INC_LOP__A, 0x0000), + WR16(B_EC_OC_REG_DTO_INC_HIP__A, 0x00C0), + + WR16(B_EC_OD_REG_SYNC__A, 0x0664), + WR16(B_EC_RS_REG_REQ_PCK_CNT__A, 0x1000), + +/* CHK_ERROR(ResetECRAM(demod)); */ + /* Reset packet sync bytes in EC_VD ram */ + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (0 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (1 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (2 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (3 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (4 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (5 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (6 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (7 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (8 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (9 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (10 * 17), 0x0000), + + /* Reset packet sync bytes in EC_RS ram */ + WR16(EC_RS_EC_RAM__A, 0x0000), + WR16(EC_RS_EC_RAM__A + 204, 0x0000), + + WR16(B_EC_SB_REG_COMM_EXEC__A, 0x0001), + WR16(B_EC_VD_REG_COMM_EXEC__A, 0x0001), + WR16(B_EC_OD_REG_COMM_EXEC__A, 0x0001), + WR16(B_EC_RS_REG_COMM_EXEC__A, 0x0001), + END_OF_TABLE +}; + +u8 DRXD_ResetECA2[] = { + + WR16(EC_OC_REG_COMM_EXEC__A, 0x0000), + WR16(EC_OD_REG_COMM_EXEC__A, 0x0000), + + WRBLOCK(EC_OC_REG_TMD_TOP_MODE__A, 5), + 0x03, 0x00, /* EC_OC_REG_TMD_TOP_MODE__A */ + 0xF4, 0x01, /* EC_OC_REG_TMD_TOP_CNT__A */ + 0xC0, 0x03, /* EC_OC_REG_TMD_HIL_MAR__A */ + 0x40, 0x00, /* EC_OC_REG_TMD_LOL_MAR__A */ + 0x03, 0x00, /* EC_OC_REG_TMD_CUR_CNT__A */ + + WRBLOCK(EC_OC_REG_AVR_ASH_CNT__A, 2), + 0x06, 0x00, /* EC_OC_REG_AVR_ASH_CNT__A */ + 0x02, 0x00, /* EC_OC_REG_AVR_BSH_CNT__A */ + + WRBLOCK(EC_OC_REG_RCN_MODE__A, 7), + 0x07, 0x00, /* EC_OC_REG_RCN_MODE__A */ + 0x00, 0x00, /* EC_OC_REG_RCN_CRA_LOP__A */ + 0xc0, 0x00, /* EC_OC_REG_RCN_CRA_HIP__A */ + 0x00, 0x10, /* EC_OC_REG_RCN_CST_LOP__A */ + 0x00, 0x00, /* EC_OC_REG_RCN_CST_HIP__A */ + 0xFF, 0x01, /* EC_OC_REG_RCN_SET_LVL__A */ + 0x0D, 0x00, /* EC_OC_REG_RCN_GAI_LVL__A */ + + WRBLOCK(EC_OC_REG_RCN_CLP_LOP__A, 2), + 0x00, 0x00, /* EC_OC_REG_RCN_CLP_LOP__A */ + 0xC0, 0x00, /* EC_OC_REG_RCN_CLP_HIP__A */ + + WR16(EC_OD_REG_SYNC__A, 0x0664), + WR16(EC_OC_REG_OC_MON_SIO__A, 0x0000), + WR16(EC_OC_REG_SNC_ISC_LVL__A, 0x0D0C), + /* Output zero on monitorbus pads, power saving */ + WR16(EC_OC_REG_OCR_MON_UOS__A, + (EC_OC_REG_OCR_MON_UOS_DAT_0_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_1_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_2_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_3_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_4_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_5_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_6_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_7_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_8_ENABLE | + EC_OC_REG_OCR_MON_UOS_DAT_9_ENABLE | + EC_OC_REG_OCR_MON_UOS_VAL_ENABLE | + EC_OC_REG_OCR_MON_UOS_CLK_ENABLE)), + WR16(EC_OC_REG_OCR_MON_WRI__A, + EC_OC_REG_OCR_MON_WRI_INIT), + +/* CHK_ERROR(ResetECRAM(demod)); */ + /* Reset packet sync bytes in EC_VD ram */ + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (0 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (1 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (2 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (3 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (4 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (5 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (6 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (7 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (8 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (9 * 17), 0x0000), + WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (10 * 17), 0x0000), + + /* Reset packet sync bytes in EC_RS ram */ + WR16(EC_RS_EC_RAM__A, 0x0000), + WR16(EC_RS_EC_RAM__A + 204, 0x0000), + + WR16(EC_OD_REG_COMM_EXEC__A, 0x0001), + END_OF_TABLE +}; + +u8 DRXD_InitSC[] = { + WR16(SC_COMM_EXEC__A, 0), + WR16(SC_COMM_STATE__A, 0), + +#ifdef COMPILE_FOR_QT + WR16(SC_RA_RAM_BE_OPT_DELAY__A, 0x100), +#endif + + /* SC is not started, this is done in SetChannels() */ + END_OF_TABLE +}; + +/* Diversity settings */ + +u8 DRXD_InitDiversityFront[] = { + /* Start demod ********* RF in , diversity out **************************** */ + WR16(B_SC_RA_RAM_CONFIG__A, B_SC_RA_RAM_CONFIG_FR_ENABLE__M | + B_SC_RA_RAM_CONFIG_FREQSCAN__M), + + WR16(B_SC_RA_RAM_LC_ABS_2K__A, 0x7), + WR16(B_SC_RA_RAM_LC_ABS_8K__A, 0x7), + WR16(B_SC_RA_RAM_IR_COARSE_8K_LENGTH__A, IRLEN_COARSE_8K), + WR16(B_SC_RA_RAM_IR_COARSE_8K_FREQINC__A, 1 << (11 - IRLEN_COARSE_8K)), + WR16(B_SC_RA_RAM_IR_COARSE_8K_KAISINC__A, 1 << (17 - IRLEN_COARSE_8K)), + WR16(B_SC_RA_RAM_IR_FINE_8K_LENGTH__A, IRLEN_FINE_8K), + WR16(B_SC_RA_RAM_IR_FINE_8K_FREQINC__A, 1 << (11 - IRLEN_FINE_8K)), + WR16(B_SC_RA_RAM_IR_FINE_8K_KAISINC__A, 1 << (17 - IRLEN_FINE_8K)), + + WR16(B_SC_RA_RAM_IR_COARSE_2K_LENGTH__A, IRLEN_COARSE_2K), + WR16(B_SC_RA_RAM_IR_COARSE_2K_FREQINC__A, 1 << (11 - IRLEN_COARSE_2K)), + WR16(B_SC_RA_RAM_IR_COARSE_2K_KAISINC__A, 1 << (17 - IRLEN_COARSE_2K)), + WR16(B_SC_RA_RAM_IR_FINE_2K_LENGTH__A, IRLEN_FINE_2K), + WR16(B_SC_RA_RAM_IR_FINE_2K_FREQINC__A, 1 << (11 - IRLEN_FINE_2K)), + WR16(B_SC_RA_RAM_IR_FINE_2K_KAISINC__A, 1 << (17 - IRLEN_FINE_2K)), + + WR16(B_LC_RA_RAM_FILTER_CRMM_A__A, 7), + WR16(B_LC_RA_RAM_FILTER_CRMM_B__A, 4), + WR16(B_LC_RA_RAM_FILTER_SRMM_A__A, 7), + WR16(B_LC_RA_RAM_FILTER_SRMM_B__A, 4), + WR16(B_LC_RA_RAM_FILTER_SYM_SET__A, 500), + + WR16(B_CC_REG_DIVERSITY__A, 0x0001), + WR16(B_EC_OC_REG_OC_MODE_HIP__A, 0x0010), + WR16(B_EQ_REG_RC_SEL_CAR__A, B_EQ_REG_RC_SEL_CAR_PASS_B_CE | + B_EQ_REG_RC_SEL_CAR_LOCAL_B_CE | B_EQ_REG_RC_SEL_CAR_MEAS_B_CE), + + /* 0x2a ), *//* CE to PASS mux */ + + END_OF_TABLE +}; + +u8 DRXD_InitDiversityEnd[] = { + /* End demod *********** combining RF in and diversity in, MPEG TS out **** */ + /* disable near/far; switch on timing slave mode */ + WR16(B_SC_RA_RAM_CONFIG__A, B_SC_RA_RAM_CONFIG_FR_ENABLE__M | + B_SC_RA_RAM_CONFIG_FREQSCAN__M | + B_SC_RA_RAM_CONFIG_DIV_ECHO_ENABLE__M | + B_SC_RA_RAM_CONFIG_SLAVE__M | + B_SC_RA_RAM_CONFIG_DIV_BLANK_ENABLE__M +/* MV from CtrlDiversity */ + ), +#ifdef DRXDDIV_SRMM_SLAVING + WR16(SC_RA_RAM_LC_ABS_2K__A, 0x3c7), + WR16(SC_RA_RAM_LC_ABS_8K__A, 0x3c7), +#else + WR16(SC_RA_RAM_LC_ABS_2K__A, 0x7), + WR16(SC_RA_RAM_LC_ABS_8K__A, 0x7), +#endif + + WR16(B_SC_RA_RAM_IR_COARSE_8K_LENGTH__A, IRLEN_COARSE_8K), + WR16(B_SC_RA_RAM_IR_COARSE_8K_FREQINC__A, 1 << (11 - IRLEN_COARSE_8K)), + WR16(B_SC_RA_RAM_IR_COARSE_8K_KAISINC__A, 1 << (17 - IRLEN_COARSE_8K)), + WR16(B_SC_RA_RAM_IR_FINE_8K_LENGTH__A, IRLEN_FINE_8K), + WR16(B_SC_RA_RAM_IR_FINE_8K_FREQINC__A, 1 << (11 - IRLEN_FINE_8K)), + WR16(B_SC_RA_RAM_IR_FINE_8K_KAISINC__A, 1 << (17 - IRLEN_FINE_8K)), + + WR16(B_SC_RA_RAM_IR_COARSE_2K_LENGTH__A, IRLEN_COARSE_2K), + WR16(B_SC_RA_RAM_IR_COARSE_2K_FREQINC__A, 1 << (11 - IRLEN_COARSE_2K)), + WR16(B_SC_RA_RAM_IR_COARSE_2K_KAISINC__A, 1 << (17 - IRLEN_COARSE_2K)), + WR16(B_SC_RA_RAM_IR_FINE_2K_LENGTH__A, IRLEN_FINE_2K), + WR16(B_SC_RA_RAM_IR_FINE_2K_FREQINC__A, 1 << (11 - IRLEN_FINE_2K)), + WR16(B_SC_RA_RAM_IR_FINE_2K_KAISINC__A, 1 << (17 - IRLEN_FINE_2K)), + + WR16(B_LC_RA_RAM_FILTER_CRMM_A__A, 7), + WR16(B_LC_RA_RAM_FILTER_CRMM_B__A, 4), + WR16(B_LC_RA_RAM_FILTER_SRMM_A__A, 7), + WR16(B_LC_RA_RAM_FILTER_SRMM_B__A, 4), + WR16(B_LC_RA_RAM_FILTER_SYM_SET__A, 500), + + WR16(B_CC_REG_DIVERSITY__A, 0x0001), + END_OF_TABLE +}; + +u8 DRXD_DisableDiversity[] = { + WR16(B_SC_RA_RAM_LC_ABS_2K__A, B_SC_RA_RAM_LC_ABS_2K__PRE), + WR16(B_SC_RA_RAM_LC_ABS_8K__A, B_SC_RA_RAM_LC_ABS_8K__PRE), + WR16(B_SC_RA_RAM_IR_COARSE_8K_LENGTH__A, + B_SC_RA_RAM_IR_COARSE_8K_LENGTH__PRE), + WR16(B_SC_RA_RAM_IR_COARSE_8K_FREQINC__A, + B_SC_RA_RAM_IR_COARSE_8K_FREQINC__PRE), + WR16(B_SC_RA_RAM_IR_COARSE_8K_KAISINC__A, + B_SC_RA_RAM_IR_COARSE_8K_KAISINC__PRE), + WR16(B_SC_RA_RAM_IR_FINE_8K_LENGTH__A, + B_SC_RA_RAM_IR_FINE_8K_LENGTH__PRE), + WR16(B_SC_RA_RAM_IR_FINE_8K_FREQINC__A, + B_SC_RA_RAM_IR_FINE_8K_FREQINC__PRE), + WR16(B_SC_RA_RAM_IR_FINE_8K_KAISINC__A, + B_SC_RA_RAM_IR_FINE_8K_KAISINC__PRE), + + WR16(B_SC_RA_RAM_IR_COARSE_2K_LENGTH__A, + B_SC_RA_RAM_IR_COARSE_2K_LENGTH__PRE), + WR16(B_SC_RA_RAM_IR_COARSE_2K_FREQINC__A, + B_SC_RA_RAM_IR_COARSE_2K_FREQINC__PRE), + WR16(B_SC_RA_RAM_IR_COARSE_2K_KAISINC__A, + B_SC_RA_RAM_IR_COARSE_2K_KAISINC__PRE), + WR16(B_SC_RA_RAM_IR_FINE_2K_LENGTH__A, + B_SC_RA_RAM_IR_FINE_2K_LENGTH__PRE), + WR16(B_SC_RA_RAM_IR_FINE_2K_FREQINC__A, + B_SC_RA_RAM_IR_FINE_2K_FREQINC__PRE), + WR16(B_SC_RA_RAM_IR_FINE_2K_KAISINC__A, + B_SC_RA_RAM_IR_FINE_2K_KAISINC__PRE), + + WR16(B_LC_RA_RAM_FILTER_CRMM_A__A, B_LC_RA_RAM_FILTER_CRMM_A__PRE), + WR16(B_LC_RA_RAM_FILTER_CRMM_B__A, B_LC_RA_RAM_FILTER_CRMM_B__PRE), + WR16(B_LC_RA_RAM_FILTER_SRMM_A__A, B_LC_RA_RAM_FILTER_SRMM_A__PRE), + WR16(B_LC_RA_RAM_FILTER_SRMM_B__A, B_LC_RA_RAM_FILTER_SRMM_B__PRE), + WR16(B_LC_RA_RAM_FILTER_SYM_SET__A, B_LC_RA_RAM_FILTER_SYM_SET__PRE), + + WR16(B_CC_REG_DIVERSITY__A, 0x0000), + WR16(B_EQ_REG_RC_SEL_CAR__A, B_EQ_REG_RC_SEL_CAR_INIT), /* combining disabled */ + + END_OF_TABLE +}; + +u8 DRXD_StartDiversityFront[] = { + /* Start demod, RF in and diversity out, no combining */ + WR16(B_FE_CF_REG_IMP_VAL__A, 0x0), + WR16(B_FE_AD_REG_FDB_IN__A, 0x0), + WR16(B_FE_AD_REG_INVEXT__A, 0x0), + WR16(B_EQ_REG_COMM_MB__A, 0x12), /* EQ to MB out */ + WR16(B_EQ_REG_RC_SEL_CAR__A, B_EQ_REG_RC_SEL_CAR_PASS_B_CE | /* CE to PASS mux */ + B_EQ_REG_RC_SEL_CAR_LOCAL_B_CE | B_EQ_REG_RC_SEL_CAR_MEAS_B_CE), + + WR16(SC_RA_RAM_ECHO_SHIFT_LIM__A, 2), + + END_OF_TABLE +}; + +u8 DRXD_StartDiversityEnd[] = { + /* End demod, combining RF in and diversity in, MPEG TS out */ + WR16(B_FE_CF_REG_IMP_VAL__A, 0x0), /* disable impulse noise cruncher */ + WR16(B_FE_AD_REG_INVEXT__A, 0x0), /* clock inversion (for sohard board) */ + WR16(B_CP_REG_BR_STR_DEL__A, 10), /* apperently no mb delay matching is best */ + + WR16(B_EQ_REG_RC_SEL_CAR__A, B_EQ_REG_RC_SEL_CAR_DIV_ON | /* org = 0x81 combining enabled */ + B_EQ_REG_RC_SEL_CAR_MEAS_A_CC | + B_EQ_REG_RC_SEL_CAR_PASS_A_CC | B_EQ_REG_RC_SEL_CAR_LOCAL_A_CC), + + END_OF_TABLE +}; + +u8 DRXD_DiversityDelay8MHZ[] = { + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_32__A, 1150 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_16__A, 1100 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_8__A, 1000 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_4__A, 800 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_32__A, 5420 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_16__A, 5200 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_8__A, 4800 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_4__A, 4000 - 50), + END_OF_TABLE +}; + +u8 DRXD_DiversityDelay6MHZ[] = /* also used ok for 7 MHz */ +{ + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_32__A, 1100 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_16__A, 1000 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_8__A, 900 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_4__A, 600 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_32__A, 5300 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_16__A, 5000 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_8__A, 4500 - 50), + WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_4__A, 3500 - 50), + END_OF_TABLE +}; diff --git a/drivers/media/dvb-frontends/drxd_firm.h b/drivers/media/dvb-frontends/drxd_firm.h new file mode 100644 index 00000000..41597e89 --- /dev/null +++ b/drivers/media/dvb-frontends/drxd_firm.h @@ -0,0 +1,115 @@ +/* + * drxd_firm.h + * + * Copyright (C) 2006-2007 Micronas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef _DRXD_FIRM_H_ +#define _DRXD_FIRM_H_ + +#include +#include "drxd_map_firm.h" + +#define VERSION_MAJOR 1 +#define VERSION_MINOR 4 +#define VERSION_PATCH 23 + +#define HI_TR_FUNC_ADDR HI_IF_RAM_USR_BEGIN__A + +#define DRXD_MAX_RETRIES (1000) +#define HI_I2C_DELAY 84 +#define HI_I2C_BRIDGE_DELAY 750 + +#define EQ_TD_TPS_PWR_UNKNOWN 0x00C0 /* Unknown configurations */ +#define EQ_TD_TPS_PWR_QPSK 0x016a +#define EQ_TD_TPS_PWR_QAM16_ALPHAN 0x0195 +#define EQ_TD_TPS_PWR_QAM16_ALPHA1 0x0195 +#define EQ_TD_TPS_PWR_QAM16_ALPHA2 0x011E +#define EQ_TD_TPS_PWR_QAM16_ALPHA4 0x01CE +#define EQ_TD_TPS_PWR_QAM64_ALPHAN 0x019F +#define EQ_TD_TPS_PWR_QAM64_ALPHA1 0x019F +#define EQ_TD_TPS_PWR_QAM64_ALPHA2 0x00F8 +#define EQ_TD_TPS_PWR_QAM64_ALPHA4 0x014D + +#define DRXD_DEF_AG_PWD_CONSUMER 0x000E +#define DRXD_DEF_AG_PWD_PRO 0x0000 +#define DRXD_DEF_AG_AGC_SIO 0x0000 + +#define DRXD_FE_CTRL_MAX 1023 + +#define DRXD_OSCDEV_DO_SCAN (16) + +#define DRXD_OSCDEV_DONT_SCAN (0) + +#define DRXD_OSCDEV_STEP (275) + +#define DRXD_SCAN_TIMEOUT (650) + +#define DRXD_BANDWIDTH_8MHZ_IN_HZ (0x8B8249L) +#define DRXD_BANDWIDTH_7MHZ_IN_HZ (0x7A1200L) +#define DRXD_BANDWIDTH_6MHZ_IN_HZ (0x68A1B6L) + +#define IRLEN_COARSE_8K (10) +#define IRLEN_FINE_8K (10) +#define IRLEN_COARSE_2K (7) +#define IRLEN_FINE_2K (9) +#define DIFF_INVALID (511) +#define DIFF_TARGET (4) +#define DIFF_MARGIN (1) + +extern u8 DRXD_InitAtomicRead[]; +extern u8 DRXD_HiI2cPatch_1[]; +extern u8 DRXD_HiI2cPatch_3[]; + +extern u8 DRXD_InitSC[]; + +extern u8 DRXD_ResetCEFR[]; +extern u8 DRXD_InitFEA2_1[]; +extern u8 DRXD_InitFEA2_2[]; +extern u8 DRXD_InitCPA2[]; +extern u8 DRXD_InitCEA2[]; +extern u8 DRXD_InitEQA2[]; +extern u8 DRXD_InitECA2[]; +extern u8 DRXD_ResetECA2[]; +extern u8 DRXD_ResetECRAM[]; + +extern u8 DRXD_A2_microcode[]; +extern u32 DRXD_A2_microcode_length; + +extern u8 DRXD_InitFEB1_1[]; +extern u8 DRXD_InitFEB1_2[]; +extern u8 DRXD_InitCPB1[]; +extern u8 DRXD_InitCEB1[]; +extern u8 DRXD_InitEQB1[]; +extern u8 DRXD_InitECB1[]; + +extern u8 DRXD_InitDiversityFront[]; +extern u8 DRXD_InitDiversityEnd[]; +extern u8 DRXD_DisableDiversity[]; +extern u8 DRXD_StartDiversityFront[]; +extern u8 DRXD_StartDiversityEnd[]; + +extern u8 DRXD_DiversityDelay8MHZ[]; +extern u8 DRXD_DiversityDelay6MHZ[]; + +extern u8 DRXD_B1_microcode[]; +extern u32 DRXD_B1_microcode_length; + +#endif diff --git a/drivers/media/dvb-frontends/drxd_hard.c b/drivers/media/dvb-frontends/drxd_hard.c new file mode 100644 index 00000000..9a213479 --- /dev/null +++ b/drivers/media/dvb-frontends/drxd_hard.c @@ -0,0 +1,2997 @@ +/* + * drxd_hard.c: DVB-T Demodulator Micronas DRX3975D-A2,DRX397xD-B1 + * + * Copyright (C) 2003-2007 Micronas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "drxd.h" +#include "drxd_firm.h" + +#define DRX_FW_FILENAME_A2 "drxd-a2-1.1.fw" +#define DRX_FW_FILENAME_B1 "drxd-b1-1.1.fw" + +#define CHUNK_SIZE 48 + +#define DRX_I2C_RMW 0x10 +#define DRX_I2C_BROADCAST 0x20 +#define DRX_I2C_CLEARCRC 0x80 +#define DRX_I2C_SINGLE_MASTER 0xC0 +#define DRX_I2C_MODEFLAGS 0xC0 +#define DRX_I2C_FLAGS 0xF0 + +#ifndef SIZEOF_ARRAY +#define SIZEOF_ARRAY(array) (sizeof((array))/sizeof((array)[0])) +#endif + +#define DEFAULT_LOCK_TIMEOUT 1100 + +#define DRX_CHANNEL_AUTO 0 +#define DRX_CHANNEL_HIGH 1 +#define DRX_CHANNEL_LOW 2 + +#define DRX_LOCK_MPEG 1 +#define DRX_LOCK_FEC 2 +#define DRX_LOCK_DEMOD 4 + +/****************************************************************************/ + +enum CSCDState { + CSCD_INIT = 0, + CSCD_SET, + CSCD_SAVED +}; + +enum CDrxdState { + DRXD_UNINITIALIZED = 0, + DRXD_STOPPED, + DRXD_STARTED +}; + +enum AGC_CTRL_MODE { + AGC_CTRL_AUTO = 0, + AGC_CTRL_USER, + AGC_CTRL_OFF +}; + +enum OperationMode { + OM_Default, + OM_DVBT_Diversity_Front, + OM_DVBT_Diversity_End +}; + +struct SCfgAgc { + enum AGC_CTRL_MODE ctrlMode; + u16 outputLevel; /* range [0, ... , 1023], 1/n of fullscale range */ + u16 settleLevel; /* range [0, ... , 1023], 1/n of fullscale range */ + u16 minOutputLevel; /* range [0, ... , 1023], 1/n of fullscale range */ + u16 maxOutputLevel; /* range [0, ... , 1023], 1/n of fullscale range */ + u16 speed; /* range [0, ... , 1023], 1/n of fullscale range */ + + u16 R1; + u16 R2; + u16 R3; +}; + +struct SNoiseCal { + int cpOpt; + short cpNexpOfs; + short tdCal2k; + short tdCal8k; +}; + +enum app_env { + APPENV_STATIC = 0, + APPENV_PORTABLE = 1, + APPENV_MOBILE = 2 +}; + +enum EIFFilter { + IFFILTER_SAW = 0, + IFFILTER_DISCRETE = 1 +}; + +struct drxd_state { + struct dvb_frontend frontend; + struct dvb_frontend_ops ops; + struct dtv_frontend_properties props; + + const struct firmware *fw; + struct device *dev; + + struct i2c_adapter *i2c; + void *priv; + struct drxd_config config; + + int i2c_access; + int init_done; + struct mutex mutex; + + u8 chip_adr; + u16 hi_cfg_timing_div; + u16 hi_cfg_bridge_delay; + u16 hi_cfg_wakeup_key; + u16 hi_cfg_ctrl; + + u16 intermediate_freq; + u16 osc_clock_freq; + + enum CSCDState cscd_state; + enum CDrxdState drxd_state; + + u16 sys_clock_freq; + s16 osc_clock_deviation; + u16 expected_sys_clock_freq; + + u16 insert_rs_byte; + u16 enable_parallel; + + int operation_mode; + + struct SCfgAgc if_agc_cfg; + struct SCfgAgc rf_agc_cfg; + + struct SNoiseCal noise_cal; + + u32 fe_fs_add_incr; + u32 org_fe_fs_add_incr; + u16 current_fe_if_incr; + + u16 m_FeAgRegAgPwd; + u16 m_FeAgRegAgAgcSio; + + u16 m_EcOcRegOcModeLop; + u16 m_EcOcRegSncSncLvl; + u8 *m_InitAtomicRead; + u8 *m_HiI2cPatch; + + u8 *m_ResetCEFR; + u8 *m_InitFE_1; + u8 *m_InitFE_2; + u8 *m_InitCP; + u8 *m_InitCE; + u8 *m_InitEQ; + u8 *m_InitSC; + u8 *m_InitEC; + u8 *m_ResetECRAM; + u8 *m_InitDiversityFront; + u8 *m_InitDiversityEnd; + u8 *m_DisableDiversity; + u8 *m_StartDiversityFront; + u8 *m_StartDiversityEnd; + + u8 *m_DiversityDelay8MHZ; + u8 *m_DiversityDelay6MHZ; + + u8 *microcode; + u32 microcode_length; + + int type_A; + int PGA; + int diversity; + int tuner_mirrors; + + enum app_env app_env_default; + enum app_env app_env_diversity; + +}; + +/****************************************************************************/ +/* I2C **********************************************************************/ +/****************************************************************************/ + +static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 * data, int len) +{ + struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = data, .len = len }; + + if (i2c_transfer(adap, &msg, 1) != 1) + return -1; + return 0; +} + +static int i2c_read(struct i2c_adapter *adap, + u8 adr, u8 *msg, int len, u8 *answ, int alen) +{ + struct i2c_msg msgs[2] = { + { + .addr = adr, .flags = 0, + .buf = msg, .len = len + }, { + .addr = adr, .flags = I2C_M_RD, + .buf = answ, .len = alen + } + }; + if (i2c_transfer(adap, msgs, 2) != 2) + return -1; + return 0; +} + +static inline u32 MulDiv32(u32 a, u32 b, u32 c) +{ + u64 tmp64; + + tmp64 = (u64)a * (u64)b; + do_div(tmp64, c); + + return (u32) tmp64; +} + +static int Read16(struct drxd_state *state, u32 reg, u16 *data, u8 flags) +{ + u8 adr = state->config.demod_address; + u8 mm1[4] = { reg & 0xff, (reg >> 16) & 0xff, + flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff + }; + u8 mm2[2]; + if (i2c_read(state->i2c, adr, mm1, 4, mm2, 2) < 0) + return -1; + if (data) + *data = mm2[0] | (mm2[1] << 8); + return mm2[0] | (mm2[1] << 8); +} + +static int Read32(struct drxd_state *state, u32 reg, u32 *data, u8 flags) +{ + u8 adr = state->config.demod_address; + u8 mm1[4] = { reg & 0xff, (reg >> 16) & 0xff, + flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff + }; + u8 mm2[4]; + + if (i2c_read(state->i2c, adr, mm1, 4, mm2, 4) < 0) + return -1; + if (data) + *data = + mm2[0] | (mm2[1] << 8) | (mm2[2] << 16) | (mm2[3] << 24); + return 0; +} + +static int Write16(struct drxd_state *state, u32 reg, u16 data, u8 flags) +{ + u8 adr = state->config.demod_address; + u8 mm[6] = { reg & 0xff, (reg >> 16) & 0xff, + flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff, + data & 0xff, (data >> 8) & 0xff + }; + + if (i2c_write(state->i2c, adr, mm, 6) < 0) + return -1; + return 0; +} + +static int Write32(struct drxd_state *state, u32 reg, u32 data, u8 flags) +{ + u8 adr = state->config.demod_address; + u8 mm[8] = { reg & 0xff, (reg >> 16) & 0xff, + flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff, + data & 0xff, (data >> 8) & 0xff, + (data >> 16) & 0xff, (data >> 24) & 0xff + }; + + if (i2c_write(state->i2c, adr, mm, 8) < 0) + return -1; + return 0; +} + +static int write_chunk(struct drxd_state *state, + u32 reg, u8 *data, u32 len, u8 flags) +{ + u8 adr = state->config.demod_address; + u8 mm[CHUNK_SIZE + 4] = { reg & 0xff, (reg >> 16) & 0xff, + flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff + }; + int i; + + for (i = 0; i < len; i++) + mm[4 + i] = data[i]; + if (i2c_write(state->i2c, adr, mm, 4 + len) < 0) { + printk(KERN_ERR "error in write_chunk\n"); + return -1; + } + return 0; +} + +static int WriteBlock(struct drxd_state *state, + u32 Address, u16 BlockSize, u8 *pBlock, u8 Flags) +{ + while (BlockSize > 0) { + u16 Chunk = BlockSize > CHUNK_SIZE ? CHUNK_SIZE : BlockSize; + + if (write_chunk(state, Address, pBlock, Chunk, Flags) < 0) + return -1; + pBlock += Chunk; + Address += (Chunk >> 1); + BlockSize -= Chunk; + } + return 0; +} + +static int WriteTable(struct drxd_state *state, u8 * pTable) +{ + int status = 0; + + if (pTable == NULL) + return 0; + + while (!status) { + u16 Length; + u32 Address = pTable[0] | (pTable[1] << 8) | + (pTable[2] << 16) | (pTable[3] << 24); + + if (Address == 0xFFFFFFFF) + break; + pTable += sizeof(u32); + + Length = pTable[0] | (pTable[1] << 8); + pTable += sizeof(u16); + if (!Length) + break; + status = WriteBlock(state, Address, Length * 2, pTable, 0); + pTable += (Length * 2); + } + return status; +} + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static int ResetCEFR(struct drxd_state *state) +{ + return WriteTable(state, state->m_ResetCEFR); +} + +static int InitCP(struct drxd_state *state) +{ + return WriteTable(state, state->m_InitCP); +} + +static int InitCE(struct drxd_state *state) +{ + int status; + enum app_env AppEnv = state->app_env_default; + + do { + status = WriteTable(state, state->m_InitCE); + if (status < 0) + break; + + if (state->operation_mode == OM_DVBT_Diversity_Front || + state->operation_mode == OM_DVBT_Diversity_End) { + AppEnv = state->app_env_diversity; + } + if (AppEnv == APPENV_STATIC) { + status = Write16(state, CE_REG_TAPSET__A, 0x0000, 0); + if (status < 0) + break; + } else if (AppEnv == APPENV_PORTABLE) { + status = Write16(state, CE_REG_TAPSET__A, 0x0001, 0); + if (status < 0) + break; + } else if (AppEnv == APPENV_MOBILE && state->type_A) { + status = Write16(state, CE_REG_TAPSET__A, 0x0002, 0); + if (status < 0) + break; + } else if (AppEnv == APPENV_MOBILE && !state->type_A) { + status = Write16(state, CE_REG_TAPSET__A, 0x0006, 0); + if (status < 0) + break; + } + + /* start ce */ + status = Write16(state, B_CE_REG_COMM_EXEC__A, 0x0001, 0); + if (status < 0) + break; + } while (0); + return status; +} + +static int StopOC(struct drxd_state *state) +{ + int status = 0; + u16 ocSyncLvl = 0; + u16 ocModeLop = state->m_EcOcRegOcModeLop; + u16 dtoIncLop = 0; + u16 dtoIncHip = 0; + + do { + /* Store output configuration */ + status = Read16(state, EC_OC_REG_SNC_ISC_LVL__A, &ocSyncLvl, 0); + if (status < 0) + break; + /* CHK_ERROR(Read16(EC_OC_REG_OC_MODE_LOP__A, &ocModeLop)); */ + state->m_EcOcRegSncSncLvl = ocSyncLvl; + /* m_EcOcRegOcModeLop = ocModeLop; */ + + /* Flush FIFO (byte-boundary) at fixed rate */ + status = Read16(state, EC_OC_REG_RCN_MAP_LOP__A, &dtoIncLop, 0); + if (status < 0) + break; + status = Read16(state, EC_OC_REG_RCN_MAP_HIP__A, &dtoIncHip, 0); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_DTO_INC_LOP__A, dtoIncLop, 0); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_DTO_INC_HIP__A, dtoIncHip, 0); + if (status < 0) + break; + ocModeLop &= ~(EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC__M); + ocModeLop |= EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC_STATIC; + status = Write16(state, EC_OC_REG_OC_MODE_LOP__A, ocModeLop, 0); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_COMM_EXEC__A, EC_OC_REG_COMM_EXEC_CTL_HOLD, 0); + if (status < 0) + break; + + msleep(1); + /* Output pins to '0' */ + status = Write16(state, EC_OC_REG_OCR_MPG_UOS__A, EC_OC_REG_OCR_MPG_UOS__M, 0); + if (status < 0) + break; + + /* Force the OC out of sync */ + ocSyncLvl &= ~(EC_OC_REG_SNC_ISC_LVL_OSC__M); + status = Write16(state, EC_OC_REG_SNC_ISC_LVL__A, ocSyncLvl, 0); + if (status < 0) + break; + ocModeLop &= ~(EC_OC_REG_OC_MODE_LOP_PAR_ENA__M); + ocModeLop |= EC_OC_REG_OC_MODE_LOP_PAR_ENA_ENABLE; + ocModeLop |= 0x2; /* Magically-out-of-sync */ + status = Write16(state, EC_OC_REG_OC_MODE_LOP__A, ocModeLop, 0); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_COMM_INT_STA__A, 0x0, 0); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_COMM_EXEC__A, EC_OC_REG_COMM_EXEC_CTL_ACTIVE, 0); + if (status < 0) + break; + } while (0); + + return status; +} + +static int StartOC(struct drxd_state *state) +{ + int status = 0; + + do { + /* Stop OC */ + status = Write16(state, EC_OC_REG_COMM_EXEC__A, EC_OC_REG_COMM_EXEC_CTL_HOLD, 0); + if (status < 0) + break; + + /* Restore output configuration */ + status = Write16(state, EC_OC_REG_SNC_ISC_LVL__A, state->m_EcOcRegSncSncLvl, 0); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_OC_MODE_LOP__A, state->m_EcOcRegOcModeLop, 0); + if (status < 0) + break; + + /* Output pins active again */ + status = Write16(state, EC_OC_REG_OCR_MPG_UOS__A, EC_OC_REG_OCR_MPG_UOS_INIT, 0); + if (status < 0) + break; + + /* Start OC */ + status = Write16(state, EC_OC_REG_COMM_EXEC__A, EC_OC_REG_COMM_EXEC_CTL_ACTIVE, 0); + if (status < 0) + break; + } while (0); + return status; +} + +static int InitEQ(struct drxd_state *state) +{ + return WriteTable(state, state->m_InitEQ); +} + +static int InitEC(struct drxd_state *state) +{ + return WriteTable(state, state->m_InitEC); +} + +static int InitSC(struct drxd_state *state) +{ + return WriteTable(state, state->m_InitSC); +} + +static int InitAtomicRead(struct drxd_state *state) +{ + return WriteTable(state, state->m_InitAtomicRead); +} + +static int CorrectSysClockDeviation(struct drxd_state *state); + +static int DRX_GetLockStatus(struct drxd_state *state, u32 * pLockStatus) +{ + u16 ScRaRamLock = 0; + const u16 mpeg_lock_mask = (SC_RA_RAM_LOCK_MPEG__M | + SC_RA_RAM_LOCK_FEC__M | + SC_RA_RAM_LOCK_DEMOD__M); + const u16 fec_lock_mask = (SC_RA_RAM_LOCK_FEC__M | + SC_RA_RAM_LOCK_DEMOD__M); + const u16 demod_lock_mask = SC_RA_RAM_LOCK_DEMOD__M; + + int status; + + *pLockStatus = 0; + + status = Read16(state, SC_RA_RAM_LOCK__A, &ScRaRamLock, 0x0000); + if (status < 0) { + printk(KERN_ERR "Can't read SC_RA_RAM_LOCK__A status = %08x\n", status); + return status; + } + + if (state->drxd_state != DRXD_STARTED) + return 0; + + if ((ScRaRamLock & mpeg_lock_mask) == mpeg_lock_mask) { + *pLockStatus |= DRX_LOCK_MPEG; + CorrectSysClockDeviation(state); + } + + if ((ScRaRamLock & fec_lock_mask) == fec_lock_mask) + *pLockStatus |= DRX_LOCK_FEC; + + if ((ScRaRamLock & demod_lock_mask) == demod_lock_mask) + *pLockStatus |= DRX_LOCK_DEMOD; + return 0; +} + +/****************************************************************************/ + +static int SetCfgIfAgc(struct drxd_state *state, struct SCfgAgc *cfg) +{ + int status; + + if (cfg->outputLevel > DRXD_FE_CTRL_MAX) + return -1; + + if (cfg->ctrlMode == AGC_CTRL_USER) { + do { + u16 FeAgRegPm1AgcWri; + u16 FeAgRegAgModeLop; + + status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &FeAgRegAgModeLop, 0); + if (status < 0) + break; + FeAgRegAgModeLop &= (~FE_AG_REG_AG_MODE_LOP_MODE_4__M); + FeAgRegAgModeLop |= FE_AG_REG_AG_MODE_LOP_MODE_4_STATIC; + status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, FeAgRegAgModeLop, 0); + if (status < 0) + break; + + FeAgRegPm1AgcWri = (u16) (cfg->outputLevel & + FE_AG_REG_PM1_AGC_WRI__M); + status = Write16(state, FE_AG_REG_PM1_AGC_WRI__A, FeAgRegPm1AgcWri, 0); + if (status < 0) + break; + } while (0); + } else if (cfg->ctrlMode == AGC_CTRL_AUTO) { + if (((cfg->maxOutputLevel) < (cfg->minOutputLevel)) || + ((cfg->maxOutputLevel) > DRXD_FE_CTRL_MAX) || + ((cfg->speed) > DRXD_FE_CTRL_MAX) || + ((cfg->settleLevel) > DRXD_FE_CTRL_MAX) + ) + return -1; + do { + u16 FeAgRegAgModeLop; + u16 FeAgRegEgcSetLvl; + u16 slope, offset; + + /* == Mode == */ + + status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &FeAgRegAgModeLop, 0); + if (status < 0) + break; + FeAgRegAgModeLop &= (~FE_AG_REG_AG_MODE_LOP_MODE_4__M); + FeAgRegAgModeLop |= + FE_AG_REG_AG_MODE_LOP_MODE_4_DYNAMIC; + status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, FeAgRegAgModeLop, 0); + if (status < 0) + break; + + /* == Settle level == */ + + FeAgRegEgcSetLvl = (u16) ((cfg->settleLevel >> 1) & + FE_AG_REG_EGC_SET_LVL__M); + status = Write16(state, FE_AG_REG_EGC_SET_LVL__A, FeAgRegEgcSetLvl, 0); + if (status < 0) + break; + + /* == Min/Max == */ + + slope = (u16) ((cfg->maxOutputLevel - + cfg->minOutputLevel) / 2); + offset = (u16) ((cfg->maxOutputLevel + + cfg->minOutputLevel) / 2 - 511); + + status = Write16(state, FE_AG_REG_GC1_AGC_RIC__A, slope, 0); + if (status < 0) + break; + status = Write16(state, FE_AG_REG_GC1_AGC_OFF__A, offset, 0); + if (status < 0) + break; + + /* == Speed == */ + { + const u16 maxRur = 8; + const u16 slowIncrDecLUT[] = { 3, 4, 4, 5, 6 }; + const u16 fastIncrDecLUT[] = { 14, 15, 15, 16, + 17, 18, 18, 19, + 20, 21, 22, 23, + 24, 26, 27, 28, + 29, 31 + }; + + u16 fineSteps = (DRXD_FE_CTRL_MAX + 1) / + (maxRur + 1); + u16 fineSpeed = (u16) (cfg->speed - + ((cfg->speed / + fineSteps) * + fineSteps)); + u16 invRurCount = (u16) (cfg->speed / + fineSteps); + u16 rurCount; + if (invRurCount > maxRur) { + rurCount = 0; + fineSpeed += fineSteps; + } else { + rurCount = maxRur - invRurCount; + } + + /* + fastInc = default * + (2^(fineSpeed/fineSteps)) + => range[default...2*default> + slowInc = default * + (2^(fineSpeed/fineSteps)) + */ + { + u16 fastIncrDec = + fastIncrDecLUT[fineSpeed / + ((fineSteps / + (14 + 1)) + 1)]; + u16 slowIncrDec = + slowIncrDecLUT[fineSpeed / + (fineSteps / + (3 + 1))]; + + status = Write16(state, FE_AG_REG_EGC_RUR_CNT__A, rurCount, 0); + if (status < 0) + break; + status = Write16(state, FE_AG_REG_EGC_FAS_INC__A, fastIncrDec, 0); + if (status < 0) + break; + status = Write16(state, FE_AG_REG_EGC_FAS_DEC__A, fastIncrDec, 0); + if (status < 0) + break; + status = Write16(state, FE_AG_REG_EGC_SLO_INC__A, slowIncrDec, 0); + if (status < 0) + break; + status = Write16(state, FE_AG_REG_EGC_SLO_DEC__A, slowIncrDec, 0); + if (status < 0) + break; + } + } + } while (0); + + } else { + /* No OFF mode for IF control */ + return -1; + } + return status; +} + +static int SetCfgRfAgc(struct drxd_state *state, struct SCfgAgc *cfg) +{ + int status = 0; + + if (cfg->outputLevel > DRXD_FE_CTRL_MAX) + return -1; + + if (cfg->ctrlMode == AGC_CTRL_USER) { + do { + u16 AgModeLop = 0; + u16 level = (cfg->outputLevel); + + if (level == DRXD_FE_CTRL_MAX) + level++; + + status = Write16(state, FE_AG_REG_PM2_AGC_WRI__A, level, 0x0000); + if (status < 0) + break; + + /*==== Mode ====*/ + + /* Powerdown PD2, WRI source */ + state->m_FeAgRegAgPwd &= ~(FE_AG_REG_AG_PWD_PWD_PD2__M); + state->m_FeAgRegAgPwd |= + FE_AG_REG_AG_PWD_PWD_PD2_DISABLE; + status = Write16(state, FE_AG_REG_AG_PWD__A, state->m_FeAgRegAgPwd, 0x0000); + if (status < 0) + break; + + status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000); + if (status < 0) + break; + AgModeLop &= (~(FE_AG_REG_AG_MODE_LOP_MODE_5__M | + FE_AG_REG_AG_MODE_LOP_MODE_E__M)); + AgModeLop |= (FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC | + FE_AG_REG_AG_MODE_LOP_MODE_E_STATIC); + status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000); + if (status < 0) + break; + + /* enable AGC2 pin */ + { + u16 FeAgRegAgAgcSio = 0; + status = Read16(state, FE_AG_REG_AG_AGC_SIO__A, &FeAgRegAgAgcSio, 0x0000); + if (status < 0) + break; + FeAgRegAgAgcSio &= + ~(FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M); + FeAgRegAgAgcSio |= + FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_OUTPUT; + status = Write16(state, FE_AG_REG_AG_AGC_SIO__A, FeAgRegAgAgcSio, 0x0000); + if (status < 0) + break; + } + + } while (0); + } else if (cfg->ctrlMode == AGC_CTRL_AUTO) { + u16 AgModeLop = 0; + + do { + u16 level; + /* Automatic control */ + /* Powerup PD2, AGC2 as output, TGC source */ + (state->m_FeAgRegAgPwd) &= + ~(FE_AG_REG_AG_PWD_PWD_PD2__M); + (state->m_FeAgRegAgPwd) |= + FE_AG_REG_AG_PWD_PWD_PD2_DISABLE; + status = Write16(state, FE_AG_REG_AG_PWD__A, (state->m_FeAgRegAgPwd), 0x0000); + if (status < 0) + break; + + status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000); + if (status < 0) + break; + AgModeLop &= (~(FE_AG_REG_AG_MODE_LOP_MODE_5__M | + FE_AG_REG_AG_MODE_LOP_MODE_E__M)); + AgModeLop |= (FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC | + FE_AG_REG_AG_MODE_LOP_MODE_E_DYNAMIC); + status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000); + if (status < 0) + break; + /* Settle level */ + level = (((cfg->settleLevel) >> 4) & + FE_AG_REG_TGC_SET_LVL__M); + status = Write16(state, FE_AG_REG_TGC_SET_LVL__A, level, 0x0000); + if (status < 0) + break; + + /* Min/max: don't care */ + + /* Speed: TODO */ + + /* enable AGC2 pin */ + { + u16 FeAgRegAgAgcSio = 0; + status = Read16(state, FE_AG_REG_AG_AGC_SIO__A, &FeAgRegAgAgcSio, 0x0000); + if (status < 0) + break; + FeAgRegAgAgcSio &= + ~(FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M); + FeAgRegAgAgcSio |= + FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_OUTPUT; + status = Write16(state, FE_AG_REG_AG_AGC_SIO__A, FeAgRegAgAgcSio, 0x0000); + if (status < 0) + break; + } + + } while (0); + } else { + u16 AgModeLop = 0; + + do { + /* No RF AGC control */ + /* Powerdown PD2, AGC2 as output, WRI source */ + (state->m_FeAgRegAgPwd) &= + ~(FE_AG_REG_AG_PWD_PWD_PD2__M); + (state->m_FeAgRegAgPwd) |= + FE_AG_REG_AG_PWD_PWD_PD2_ENABLE; + status = Write16(state, FE_AG_REG_AG_PWD__A, (state->m_FeAgRegAgPwd), 0x0000); + if (status < 0) + break; + + status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000); + if (status < 0) + break; + AgModeLop &= (~(FE_AG_REG_AG_MODE_LOP_MODE_5__M | + FE_AG_REG_AG_MODE_LOP_MODE_E__M)); + AgModeLop |= (FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC | + FE_AG_REG_AG_MODE_LOP_MODE_E_STATIC); + status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000); + if (status < 0) + break; + + /* set FeAgRegAgAgcSio AGC2 (RF) as input */ + { + u16 FeAgRegAgAgcSio = 0; + status = Read16(state, FE_AG_REG_AG_AGC_SIO__A, &FeAgRegAgAgcSio, 0x0000); + if (status < 0) + break; + FeAgRegAgAgcSio &= + ~(FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M); + FeAgRegAgAgcSio |= + FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_INPUT; + status = Write16(state, FE_AG_REG_AG_AGC_SIO__A, FeAgRegAgAgcSio, 0x0000); + if (status < 0) + break; + } + } while (0); + } + return status; +} + +static int ReadIFAgc(struct drxd_state *state, u32 * pValue) +{ + int status = 0; + + *pValue = 0; + if (state->if_agc_cfg.ctrlMode != AGC_CTRL_OFF) { + u16 Value; + status = Read16(state, FE_AG_REG_GC1_AGC_DAT__A, &Value, 0); + Value &= FE_AG_REG_GC1_AGC_DAT__M; + if (status >= 0) { + /* 3.3V + | + R1 + | + Vin - R3 - * -- Vout + | + R2 + | + GND + */ + u32 R1 = state->if_agc_cfg.R1; + u32 R2 = state->if_agc_cfg.R2; + u32 R3 = state->if_agc_cfg.R3; + + u32 Vmax, Rpar, Vmin, Vout; + + if (R2 == 0 && (R1 == 0 || R3 == 0)) + return 0; + + Vmax = (3300 * R2) / (R1 + R2); + Rpar = (R2 * R3) / (R3 + R2); + Vmin = (3300 * Rpar) / (R1 + Rpar); + Vout = Vmin + ((Vmax - Vmin) * Value) / 1024; + + *pValue = Vout; + } + } + return status; +} + +static int load_firmware(struct drxd_state *state, const char *fw_name) +{ + const struct firmware *fw; + + if (request_firmware(&fw, fw_name, state->dev) < 0) { + printk(KERN_ERR "drxd: firmware load failure [%s]\n", fw_name); + return -EIO; + } + + state->microcode = kmemdup(fw->data, fw->size, GFP_KERNEL); + if (state->microcode == NULL) { + release_firmware(fw); + printk(KERN_ERR "drxd: firmware load failure: no memory\n"); + return -ENOMEM; + } + + state->microcode_length = fw->size; + release_firmware(fw); + return 0; +} + +static int DownloadMicrocode(struct drxd_state *state, + const u8 *pMCImage, u32 Length) +{ + u8 *pSrc; + u32 Address; + u16 nBlocks; + u16 BlockSize; + u32 offset = 0; + int i, status = 0; + + pSrc = (u8 *) pMCImage; + /* We're not using Flags */ + /* Flags = (pSrc[0] << 8) | pSrc[1]; */ + pSrc += sizeof(u16); + offset += sizeof(u16); + nBlocks = (pSrc[0] << 8) | pSrc[1]; + pSrc += sizeof(u16); + offset += sizeof(u16); + + for (i = 0; i < nBlocks; i++) { + Address = (pSrc[0] << 24) | (pSrc[1] << 16) | + (pSrc[2] << 8) | pSrc[3]; + pSrc += sizeof(u32); + offset += sizeof(u32); + + BlockSize = ((pSrc[0] << 8) | pSrc[1]) * sizeof(u16); + pSrc += sizeof(u16); + offset += sizeof(u16); + + /* We're not using Flags */ + /* u16 Flags = (pSrc[0] << 8) | pSrc[1]; */ + pSrc += sizeof(u16); + offset += sizeof(u16); + + /* We're not using BlockCRC */ + /* u16 BlockCRC = (pSrc[0] << 8) | pSrc[1]; */ + pSrc += sizeof(u16); + offset += sizeof(u16); + + status = WriteBlock(state, Address, BlockSize, + pSrc, DRX_I2C_CLEARCRC); + if (status < 0) + break; + pSrc += BlockSize; + offset += BlockSize; + } + + return status; +} + +static int HI_Command(struct drxd_state *state, u16 cmd, u16 * pResult) +{ + u32 nrRetries = 0; + u16 waitCmd; + int status; + + status = Write16(state, HI_RA_RAM_SRV_CMD__A, cmd, 0); + if (status < 0) + return status; + + do { + nrRetries += 1; + if (nrRetries > DRXD_MAX_RETRIES) { + status = -1; + break; + } + status = Read16(state, HI_RA_RAM_SRV_CMD__A, &waitCmd, 0); + } while (waitCmd != 0); + + if (status >= 0) + status = Read16(state, HI_RA_RAM_SRV_RES__A, pResult, 0); + return status; +} + +static int HI_CfgCommand(struct drxd_state *state) +{ + int status = 0; + + mutex_lock(&state->mutex); + Write16(state, HI_RA_RAM_SRV_CFG_KEY__A, HI_RA_RAM_SRV_RST_KEY_ACT, 0); + Write16(state, HI_RA_RAM_SRV_CFG_DIV__A, state->hi_cfg_timing_div, 0); + Write16(state, HI_RA_RAM_SRV_CFG_BDL__A, state->hi_cfg_bridge_delay, 0); + Write16(state, HI_RA_RAM_SRV_CFG_WUP__A, state->hi_cfg_wakeup_key, 0); + Write16(state, HI_RA_RAM_SRV_CFG_ACT__A, state->hi_cfg_ctrl, 0); + + Write16(state, HI_RA_RAM_SRV_CFG_KEY__A, HI_RA_RAM_SRV_RST_KEY_ACT, 0); + + if ((state->hi_cfg_ctrl & HI_RA_RAM_SRV_CFG_ACT_PWD_EXE) == + HI_RA_RAM_SRV_CFG_ACT_PWD_EXE) + status = Write16(state, HI_RA_RAM_SRV_CMD__A, + HI_RA_RAM_SRV_CMD_CONFIG, 0); + else + status = HI_Command(state, HI_RA_RAM_SRV_CMD_CONFIG, 0); + mutex_unlock(&state->mutex); + return status; +} + +static int InitHI(struct drxd_state *state) +{ + state->hi_cfg_wakeup_key = (state->chip_adr); + /* port/bridge/power down ctrl */ + state->hi_cfg_ctrl = HI_RA_RAM_SRV_CFG_ACT_SLV0_ON; + return HI_CfgCommand(state); +} + +static int HI_ResetCommand(struct drxd_state *state) +{ + int status; + + mutex_lock(&state->mutex); + status = Write16(state, HI_RA_RAM_SRV_RST_KEY__A, + HI_RA_RAM_SRV_RST_KEY_ACT, 0); + if (status == 0) + status = HI_Command(state, HI_RA_RAM_SRV_CMD_RESET, 0); + mutex_unlock(&state->mutex); + msleep(1); + return status; +} + +static int DRX_ConfigureI2CBridge(struct drxd_state *state, int bEnableBridge) +{ + state->hi_cfg_ctrl &= (~HI_RA_RAM_SRV_CFG_ACT_BRD__M); + if (bEnableBridge) + state->hi_cfg_ctrl |= HI_RA_RAM_SRV_CFG_ACT_BRD_ON; + else + state->hi_cfg_ctrl |= HI_RA_RAM_SRV_CFG_ACT_BRD_OFF; + + return HI_CfgCommand(state); +} + +#define HI_TR_WRITE 0x9 +#define HI_TR_READ 0xA +#define HI_TR_READ_WRITE 0xB +#define HI_TR_BROADCAST 0x4 + +#if 0 +static int AtomicReadBlock(struct drxd_state *state, + u32 Addr, u16 DataSize, u8 *pData, u8 Flags) +{ + int status; + int i = 0; + + /* Parameter check */ + if ((!pData) || ((DataSize & 1) != 0)) + return -1; + + mutex_lock(&state->mutex); + + do { + /* Instruct HI to read n bytes */ + /* TODO use proper names forthese egisters */ + status = Write16(state, HI_RA_RAM_SRV_CFG_KEY__A, (HI_TR_FUNC_ADDR & 0xFFFF), 0); + if (status < 0) + break; + status = Write16(state, HI_RA_RAM_SRV_CFG_DIV__A, (u16) (Addr >> 16), 0); + if (status < 0) + break; + status = Write16(state, HI_RA_RAM_SRV_CFG_BDL__A, (u16) (Addr & 0xFFFF), 0); + if (status < 0) + break; + status = Write16(state, HI_RA_RAM_SRV_CFG_WUP__A, (u16) ((DataSize / 2) - 1), 0); + if (status < 0) + break; + status = Write16(state, HI_RA_RAM_SRV_CFG_ACT__A, HI_TR_READ, 0); + if (status < 0) + break; + + status = HI_Command(state, HI_RA_RAM_SRV_CMD_EXECUTE, 0); + if (status < 0) + break; + + } while (0); + + if (status >= 0) { + for (i = 0; i < (DataSize / 2); i += 1) { + u16 word; + + status = Read16(state, (HI_RA_RAM_USR_BEGIN__A + i), + &word, 0); + if (status < 0) + break; + pData[2 * i] = (u8) (word & 0xFF); + pData[(2 * i) + 1] = (u8) (word >> 8); + } + } + mutex_unlock(&state->mutex); + return status; +} + +static int AtomicReadReg32(struct drxd_state *state, + u32 Addr, u32 *pData, u8 Flags) +{ + u8 buf[sizeof(u32)]; + int status; + + if (!pData) + return -1; + status = AtomicReadBlock(state, Addr, sizeof(u32), buf, Flags); + *pData = (((u32) buf[0]) << 0) + + (((u32) buf[1]) << 8) + + (((u32) buf[2]) << 16) + (((u32) buf[3]) << 24); + return status; +} +#endif + +static int StopAllProcessors(struct drxd_state *state) +{ + return Write16(state, HI_COMM_EXEC__A, + SC_COMM_EXEC_CTL_STOP, DRX_I2C_BROADCAST); +} + +static int EnableAndResetMB(struct drxd_state *state) +{ + if (state->type_A) { + /* disable? monitor bus observe @ EC_OC */ + Write16(state, EC_OC_REG_OC_MON_SIO__A, 0x0000, 0x0000); + } + + /* do inverse broadcast, followed by explicit write to HI */ + Write16(state, HI_COMM_MB__A, 0x0000, DRX_I2C_BROADCAST); + Write16(state, HI_COMM_MB__A, 0x0000, 0x0000); + return 0; +} + +static int InitCC(struct drxd_state *state) +{ + if (state->osc_clock_freq == 0 || + state->osc_clock_freq > 20000 || + (state->osc_clock_freq % 4000) != 0) { + printk(KERN_ERR "invalid osc frequency %d\n", state->osc_clock_freq); + return -1; + } + + Write16(state, CC_REG_OSC_MODE__A, CC_REG_OSC_MODE_M20, 0); + Write16(state, CC_REG_PLL_MODE__A, CC_REG_PLL_MODE_BYPASS_PLL | + CC_REG_PLL_MODE_PUMP_CUR_12, 0); + Write16(state, CC_REG_REF_DIVIDE__A, state->osc_clock_freq / 4000, 0); + Write16(state, CC_REG_PWD_MODE__A, CC_REG_PWD_MODE_DOWN_PLL, 0); + Write16(state, CC_REG_UPDATE__A, CC_REG_UPDATE_KEY, 0); + + return 0; +} + +static int ResetECOD(struct drxd_state *state) +{ + int status = 0; + + if (state->type_A) + status = Write16(state, EC_OD_REG_SYNC__A, 0x0664, 0); + else + status = Write16(state, B_EC_OD_REG_SYNC__A, 0x0664, 0); + + if (!(status < 0)) + status = WriteTable(state, state->m_ResetECRAM); + if (!(status < 0)) + status = Write16(state, EC_OD_REG_COMM_EXEC__A, 0x0001, 0); + return status; +} + +/* Configure PGA switch */ + +static int SetCfgPga(struct drxd_state *state, int pgaSwitch) +{ + int status; + u16 AgModeLop = 0; + u16 AgModeHip = 0; + do { + if (pgaSwitch) { + /* PGA on */ + /* fine gain */ + status = Read16(state, B_FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000); + if (status < 0) + break; + AgModeLop &= (~(B_FE_AG_REG_AG_MODE_LOP_MODE_C__M)); + AgModeLop |= B_FE_AG_REG_AG_MODE_LOP_MODE_C_DYNAMIC; + status = Write16(state, B_FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000); + if (status < 0) + break; + + /* coarse gain */ + status = Read16(state, B_FE_AG_REG_AG_MODE_HIP__A, &AgModeHip, 0x0000); + if (status < 0) + break; + AgModeHip &= (~(B_FE_AG_REG_AG_MODE_HIP_MODE_J__M)); + AgModeHip |= B_FE_AG_REG_AG_MODE_HIP_MODE_J_DYNAMIC; + status = Write16(state, B_FE_AG_REG_AG_MODE_HIP__A, AgModeHip, 0x0000); + if (status < 0) + break; + + /* enable fine and coarse gain, enable AAF, + no ext resistor */ + status = Write16(state, B_FE_AG_REG_AG_PGA_MODE__A, B_FE_AG_REG_AG_PGA_MODE_PFY_PCY_AFY_REN, 0x0000); + if (status < 0) + break; + } else { + /* PGA off, bypass */ + + /* fine gain */ + status = Read16(state, B_FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000); + if (status < 0) + break; + AgModeLop &= (~(B_FE_AG_REG_AG_MODE_LOP_MODE_C__M)); + AgModeLop |= B_FE_AG_REG_AG_MODE_LOP_MODE_C_STATIC; + status = Write16(state, B_FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000); + if (status < 0) + break; + + /* coarse gain */ + status = Read16(state, B_FE_AG_REG_AG_MODE_HIP__A, &AgModeHip, 0x0000); + if (status < 0) + break; + AgModeHip &= (~(B_FE_AG_REG_AG_MODE_HIP_MODE_J__M)); + AgModeHip |= B_FE_AG_REG_AG_MODE_HIP_MODE_J_STATIC; + status = Write16(state, B_FE_AG_REG_AG_MODE_HIP__A, AgModeHip, 0x0000); + if (status < 0) + break; + + /* disable fine and coarse gain, enable AAF, + no ext resistor */ + status = Write16(state, B_FE_AG_REG_AG_PGA_MODE__A, B_FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN, 0x0000); + if (status < 0) + break; + } + } while (0); + return status; +} + +static int InitFE(struct drxd_state *state) +{ + int status; + + do { + status = WriteTable(state, state->m_InitFE_1); + if (status < 0) + break; + + if (state->type_A) { + status = Write16(state, FE_AG_REG_AG_PGA_MODE__A, + FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN, + 0); + } else { + if (state->PGA) + status = SetCfgPga(state, 0); + else + status = + Write16(state, B_FE_AG_REG_AG_PGA_MODE__A, + B_FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN, + 0); + } + + if (status < 0) + break; + status = Write16(state, FE_AG_REG_AG_AGC_SIO__A, state->m_FeAgRegAgAgcSio, 0x0000); + if (status < 0) + break; + status = Write16(state, FE_AG_REG_AG_PWD__A, state->m_FeAgRegAgPwd, 0x0000); + if (status < 0) + break; + + status = WriteTable(state, state->m_InitFE_2); + if (status < 0) + break; + + } while (0); + + return status; +} + +static int InitFT(struct drxd_state *state) +{ + /* + norm OFFSET, MB says =2 voor 8K en =3 voor 2K waarschijnlijk + SC stuff + */ + return Write16(state, FT_REG_COMM_EXEC__A, 0x0001, 0x0000); +} + +static int SC_WaitForReady(struct drxd_state *state) +{ + u16 curCmd; + int i; + + for (i = 0; i < DRXD_MAX_RETRIES; i += 1) { + int status = Read16(state, SC_RA_RAM_CMD__A, &curCmd, 0); + if (status == 0 || curCmd == 0) + return status; + } + return -1; +} + +static int SC_SendCommand(struct drxd_state *state, u16 cmd) +{ + int status = 0; + u16 errCode; + + Write16(state, SC_RA_RAM_CMD__A, cmd, 0); + SC_WaitForReady(state); + + Read16(state, SC_RA_RAM_CMD_ADDR__A, &errCode, 0); + + if (errCode == 0xFFFF) { + printk(KERN_ERR "Command Error\n"); + status = -1; + } + + return status; +} + +static int SC_ProcStartCommand(struct drxd_state *state, + u16 subCmd, u16 param0, u16 param1) +{ + int status = 0; + u16 scExec; + + mutex_lock(&state->mutex); + do { + Read16(state, SC_COMM_EXEC__A, &scExec, 0); + if (scExec != 1) { + status = -1; + break; + } + SC_WaitForReady(state); + Write16(state, SC_RA_RAM_CMD_ADDR__A, subCmd, 0); + Write16(state, SC_RA_RAM_PARAM1__A, param1, 0); + Write16(state, SC_RA_RAM_PARAM0__A, param0, 0); + + SC_SendCommand(state, SC_RA_RAM_CMD_PROC_START); + } while (0); + mutex_unlock(&state->mutex); + return status; +} + +static int SC_SetPrefParamCommand(struct drxd_state *state, + u16 subCmd, u16 param0, u16 param1) +{ + int status; + + mutex_lock(&state->mutex); + do { + status = SC_WaitForReady(state); + if (status < 0) + break; + status = Write16(state, SC_RA_RAM_CMD_ADDR__A, subCmd, 0); + if (status < 0) + break; + status = Write16(state, SC_RA_RAM_PARAM1__A, param1, 0); + if (status < 0) + break; + status = Write16(state, SC_RA_RAM_PARAM0__A, param0, 0); + if (status < 0) + break; + + status = SC_SendCommand(state, SC_RA_RAM_CMD_SET_PREF_PARAM); + if (status < 0) + break; + } while (0); + mutex_unlock(&state->mutex); + return status; +} + +#if 0 +static int SC_GetOpParamCommand(struct drxd_state *state, u16 * result) +{ + int status = 0; + + mutex_lock(&state->mutex); + do { + status = SC_WaitForReady(state); + if (status < 0) + break; + status = SC_SendCommand(state, SC_RA_RAM_CMD_GET_OP_PARAM); + if (status < 0) + break; + status = Read16(state, SC_RA_RAM_PARAM0__A, result, 0); + if (status < 0) + break; + } while (0); + mutex_unlock(&state->mutex); + return status; +} +#endif + +static int ConfigureMPEGOutput(struct drxd_state *state, int bEnableOutput) +{ + int status; + + do { + u16 EcOcRegIprInvMpg = 0; + u16 EcOcRegOcModeLop = 0; + u16 EcOcRegOcModeHip = 0; + u16 EcOcRegOcMpgSio = 0; + + /*CHK_ERROR(Read16(state, EC_OC_REG_OC_MODE_LOP__A, &EcOcRegOcModeLop, 0)); */ + + if (state->operation_mode == OM_DVBT_Diversity_Front) { + if (bEnableOutput) { + EcOcRegOcModeHip |= + B_EC_OC_REG_OC_MODE_HIP_MPG_BUS_SRC_MONITOR; + } else + EcOcRegOcMpgSio |= EC_OC_REG_OC_MPG_SIO__M; + EcOcRegOcModeLop |= + EC_OC_REG_OC_MODE_LOP_PAR_ENA_DISABLE; + } else { + EcOcRegOcModeLop = state->m_EcOcRegOcModeLop; + + if (bEnableOutput) + EcOcRegOcMpgSio &= (~(EC_OC_REG_OC_MPG_SIO__M)); + else + EcOcRegOcMpgSio |= EC_OC_REG_OC_MPG_SIO__M; + + /* Don't Insert RS Byte */ + if (state->insert_rs_byte) { + EcOcRegOcModeLop &= + (~(EC_OC_REG_OC_MODE_LOP_PAR_ENA__M)); + EcOcRegOcModeHip &= + (~EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL__M); + EcOcRegOcModeHip |= + EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_ENABLE; + } else { + EcOcRegOcModeLop |= + EC_OC_REG_OC_MODE_LOP_PAR_ENA_DISABLE; + EcOcRegOcModeHip &= + (~EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL__M); + EcOcRegOcModeHip |= + EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_DISABLE; + } + + /* Mode = Parallel */ + if (state->enable_parallel) + EcOcRegOcModeLop &= + (~(EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE__M)); + else + EcOcRegOcModeLop |= + EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE_SERIAL; + } + /* Invert Data */ + /* EcOcRegIprInvMpg |= 0x00FF; */ + EcOcRegIprInvMpg &= (~(0x00FF)); + + /* Invert Error ( we don't use the pin ) */ + /* EcOcRegIprInvMpg |= 0x0100; */ + EcOcRegIprInvMpg &= (~(0x0100)); + + /* Invert Start ( we don't use the pin ) */ + /* EcOcRegIprInvMpg |= 0x0200; */ + EcOcRegIprInvMpg &= (~(0x0200)); + + /* Invert Valid ( we don't use the pin ) */ + /* EcOcRegIprInvMpg |= 0x0400; */ + EcOcRegIprInvMpg &= (~(0x0400)); + + /* Invert Clock */ + /* EcOcRegIprInvMpg |= 0x0800; */ + EcOcRegIprInvMpg &= (~(0x0800)); + + /* EcOcRegOcModeLop =0x05; */ + status = Write16(state, EC_OC_REG_IPR_INV_MPG__A, EcOcRegIprInvMpg, 0); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_OC_MODE_LOP__A, EcOcRegOcModeLop, 0); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_OC_MODE_HIP__A, EcOcRegOcModeHip, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_OC_REG_OC_MPG_SIO__A, EcOcRegOcMpgSio, 0); + if (status < 0) + break; + } while (0); + return status; +} + +static int SetDeviceTypeId(struct drxd_state *state) +{ + int status = 0; + u16 deviceId = 0; + + do { + status = Read16(state, CC_REG_JTAGID_L__A, &deviceId, 0); + if (status < 0) + break; + /* TODO: why twice? */ + status = Read16(state, CC_REG_JTAGID_L__A, &deviceId, 0); + if (status < 0) + break; + printk(KERN_INFO "drxd: deviceId = %04x\n", deviceId); + + state->type_A = 0; + state->PGA = 0; + state->diversity = 0; + if (deviceId == 0) { /* on A2 only 3975 available */ + state->type_A = 1; + printk(KERN_INFO "DRX3975D-A2\n"); + } else { + deviceId >>= 12; + printk(KERN_INFO "DRX397%dD-B1\n", deviceId); + switch (deviceId) { + case 4: + state->diversity = 1; + case 3: + case 7: + state->PGA = 1; + break; + case 6: + state->diversity = 1; + case 5: + case 8: + break; + default: + status = -1; + break; + } + } + } while (0); + + if (status < 0) + return status; + + /* Init Table selection */ + state->m_InitAtomicRead = DRXD_InitAtomicRead; + state->m_InitSC = DRXD_InitSC; + state->m_ResetECRAM = DRXD_ResetECRAM; + if (state->type_A) { + state->m_ResetCEFR = DRXD_ResetCEFR; + state->m_InitFE_1 = DRXD_InitFEA2_1; + state->m_InitFE_2 = DRXD_InitFEA2_2; + state->m_InitCP = DRXD_InitCPA2; + state->m_InitCE = DRXD_InitCEA2; + state->m_InitEQ = DRXD_InitEQA2; + state->m_InitEC = DRXD_InitECA2; + if (load_firmware(state, DRX_FW_FILENAME_A2)) + return -EIO; + } else { + state->m_ResetCEFR = NULL; + state->m_InitFE_1 = DRXD_InitFEB1_1; + state->m_InitFE_2 = DRXD_InitFEB1_2; + state->m_InitCP = DRXD_InitCPB1; + state->m_InitCE = DRXD_InitCEB1; + state->m_InitEQ = DRXD_InitEQB1; + state->m_InitEC = DRXD_InitECB1; + if (load_firmware(state, DRX_FW_FILENAME_B1)) + return -EIO; + } + if (state->diversity) { + state->m_InitDiversityFront = DRXD_InitDiversityFront; + state->m_InitDiversityEnd = DRXD_InitDiversityEnd; + state->m_DisableDiversity = DRXD_DisableDiversity; + state->m_StartDiversityFront = DRXD_StartDiversityFront; + state->m_StartDiversityEnd = DRXD_StartDiversityEnd; + state->m_DiversityDelay8MHZ = DRXD_DiversityDelay8MHZ; + state->m_DiversityDelay6MHZ = DRXD_DiversityDelay6MHZ; + } else { + state->m_InitDiversityFront = NULL; + state->m_InitDiversityEnd = NULL; + state->m_DisableDiversity = NULL; + state->m_StartDiversityFront = NULL; + state->m_StartDiversityEnd = NULL; + state->m_DiversityDelay8MHZ = NULL; + state->m_DiversityDelay6MHZ = NULL; + } + + return status; +} + +static int CorrectSysClockDeviation(struct drxd_state *state) +{ + int status; + s32 incr = 0; + s32 nomincr = 0; + u32 bandwidth = 0; + u32 sysClockInHz = 0; + u32 sysClockFreq = 0; /* in kHz */ + s16 oscClockDeviation; + s16 Diff; + + do { + /* Retrieve bandwidth and incr, sanity check */ + + /* These accesses should be AtomicReadReg32, but that + causes trouble (at least for diversity */ + status = Read32(state, LC_RA_RAM_IFINCR_NOM_L__A, ((u32 *) &nomincr), 0); + if (status < 0) + break; + status = Read32(state, FE_IF_REG_INCR0__A, (u32 *) &incr, 0); + if (status < 0) + break; + + if (state->type_A) { + if ((nomincr - incr < -500) || (nomincr - incr > 500)) + break; + } else { + if ((nomincr - incr < -2000) || (nomincr - incr > 2000)) + break; + } + + switch (state->props.bandwidth_hz) { + case 8000000: + bandwidth = DRXD_BANDWIDTH_8MHZ_IN_HZ; + break; + case 7000000: + bandwidth = DRXD_BANDWIDTH_7MHZ_IN_HZ; + break; + case 6000000: + bandwidth = DRXD_BANDWIDTH_6MHZ_IN_HZ; + break; + default: + return -1; + break; + } + + /* Compute new sysclock value + sysClockFreq = (((incr + 2^23)*bandwidth)/2^21)/1000 */ + incr += (1 << 23); + sysClockInHz = MulDiv32(incr, bandwidth, 1 << 21); + sysClockFreq = (u32) (sysClockInHz / 1000); + /* rounding */ + if ((sysClockInHz % 1000) > 500) + sysClockFreq++; + + /* Compute clock deviation in ppm */ + oscClockDeviation = (u16) ((((s32) (sysClockFreq) - + (s32) + (state->expected_sys_clock_freq)) * + 1000000L) / + (s32) + (state->expected_sys_clock_freq)); + + Diff = oscClockDeviation - state->osc_clock_deviation; + /*printk(KERN_INFO "sysclockdiff=%d\n", Diff); */ + if (Diff >= -200 && Diff <= 200) { + state->sys_clock_freq = (u16) sysClockFreq; + if (oscClockDeviation != state->osc_clock_deviation) { + if (state->config.osc_deviation) { + state->config.osc_deviation(state->priv, + oscClockDeviation, + 1); + state->osc_clock_deviation = + oscClockDeviation; + } + } + /* switch OFF SRMM scan in SC */ + status = Write16(state, SC_RA_RAM_SAMPLE_RATE_COUNT__A, DRXD_OSCDEV_DONT_SCAN, 0); + if (status < 0) + break; + /* overrule FE_IF internal value for + proper re-locking */ + status = Write16(state, SC_RA_RAM_IF_SAVE__AX, state->current_fe_if_incr, 0); + if (status < 0) + break; + state->cscd_state = CSCD_SAVED; + } + } while (0); + + return status; +} + +static int DRX_Stop(struct drxd_state *state) +{ + int status; + + if (state->drxd_state != DRXD_STARTED) + return 0; + + do { + if (state->cscd_state != CSCD_SAVED) { + u32 lock; + status = DRX_GetLockStatus(state, &lock); + if (status < 0) + break; + } + + status = StopOC(state); + if (status < 0) + break; + + state->drxd_state = DRXD_STOPPED; + + status = ConfigureMPEGOutput(state, 0); + if (status < 0) + break; + + if (state->type_A) { + /* Stop relevant processors off the device */ + status = Write16(state, EC_OD_REG_COMM_EXEC__A, 0x0000, 0x0000); + if (status < 0) + break; + + status = Write16(state, SC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + status = Write16(state, LC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + } else { + /* Stop all processors except HI & CC & FE */ + status = Write16(state, B_SC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + status = Write16(state, B_LC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + status = Write16(state, B_FT_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + status = Write16(state, B_CP_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + status = Write16(state, B_CE_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + status = Write16(state, B_EQ_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + status = Write16(state, EC_OD_REG_COMM_EXEC__A, 0x0000, 0); + if (status < 0) + break; + } + + } while (0); + return status; +} + +#if 0 /* Currently unused */ +static int SetOperationMode(struct drxd_state *state, int oMode) +{ + int status; + + do { + if (state->drxd_state != DRXD_STOPPED) { + status = -1; + break; + } + + if (oMode == state->operation_mode) { + status = 0; + break; + } + + if (oMode != OM_Default && !state->diversity) { + status = -1; + break; + } + + switch (oMode) { + case OM_DVBT_Diversity_Front: + status = WriteTable(state, state->m_InitDiversityFront); + break; + case OM_DVBT_Diversity_End: + status = WriteTable(state, state->m_InitDiversityEnd); + break; + case OM_Default: + /* We need to check how to + get DRXD out of diversity */ + default: + status = WriteTable(state, state->m_DisableDiversity); + break; + } + } while (0); + + if (!status) + state->operation_mode = oMode; + return status; +} +#endif + +static int StartDiversity(struct drxd_state *state) +{ + int status = 0; + u16 rcControl; + + do { + if (state->operation_mode == OM_DVBT_Diversity_Front) { + status = WriteTable(state, state->m_StartDiversityFront); + if (status < 0) + break; + } else if (state->operation_mode == OM_DVBT_Diversity_End) { + status = WriteTable(state, state->m_StartDiversityEnd); + if (status < 0) + break; + if (state->props.bandwidth_hz == 8000000) { + status = WriteTable(state, state->m_DiversityDelay8MHZ); + if (status < 0) + break; + } else { + status = WriteTable(state, state->m_DiversityDelay6MHZ); + if (status < 0) + break; + } + + status = Read16(state, B_EQ_REG_RC_SEL_CAR__A, &rcControl, 0); + if (status < 0) + break; + rcControl &= ~(B_EQ_REG_RC_SEL_CAR_FFTMODE__M); + rcControl |= B_EQ_REG_RC_SEL_CAR_DIV_ON | + /* combining enabled */ + B_EQ_REG_RC_SEL_CAR_MEAS_A_CC | + B_EQ_REG_RC_SEL_CAR_PASS_A_CC | + B_EQ_REG_RC_SEL_CAR_LOCAL_A_CC; + status = Write16(state, B_EQ_REG_RC_SEL_CAR__A, rcControl, 0); + if (status < 0) + break; + } + } while (0); + return status; +} + +static int SetFrequencyShift(struct drxd_state *state, + u32 offsetFreq, int channelMirrored) +{ + int negativeShift = (state->tuner_mirrors == channelMirrored); + + /* Handle all mirroring + * + * Note: ADC mirroring (aliasing) is implictly handled by limiting + * feFsRegAddInc to 28 bits below + * (if the result before masking is more than 28 bits, this means + * that the ADC is mirroring. + * The masking is in fact the aliasing of the ADC) + * + */ + + /* Compute register value, unsigned computation */ + state->fe_fs_add_incr = MulDiv32(state->intermediate_freq + + offsetFreq, + 1 << 28, state->sys_clock_freq); + /* Remove integer part */ + state->fe_fs_add_incr &= 0x0FFFFFFFL; + if (negativeShift) + state->fe_fs_add_incr = ((1 << 28) - state->fe_fs_add_incr); + + /* Save the frequency shift without tunerOffset compensation + for CtrlGetChannel. */ + state->org_fe_fs_add_incr = MulDiv32(state->intermediate_freq, + 1 << 28, state->sys_clock_freq); + /* Remove integer part */ + state->org_fe_fs_add_incr &= 0x0FFFFFFFL; + if (negativeShift) + state->org_fe_fs_add_incr = ((1L << 28) - + state->org_fe_fs_add_incr); + + return Write32(state, FE_FS_REG_ADD_INC_LOP__A, + state->fe_fs_add_incr, 0); +} + +static int SetCfgNoiseCalibration(struct drxd_state *state, + struct SNoiseCal *noiseCal) +{ + u16 beOptEna; + int status = 0; + + do { + status = Read16(state, SC_RA_RAM_BE_OPT_ENA__A, &beOptEna, 0); + if (status < 0) + break; + if (noiseCal->cpOpt) { + beOptEna |= (1 << SC_RA_RAM_BE_OPT_ENA_CP_OPT); + } else { + beOptEna &= ~(1 << SC_RA_RAM_BE_OPT_ENA_CP_OPT); + status = Write16(state, CP_REG_AC_NEXP_OFFS__A, noiseCal->cpNexpOfs, 0); + if (status < 0) + break; + } + status = Write16(state, SC_RA_RAM_BE_OPT_ENA__A, beOptEna, 0); + if (status < 0) + break; + + if (!state->type_A) { + status = Write16(state, B_SC_RA_RAM_CO_TD_CAL_2K__A, noiseCal->tdCal2k, 0); + if (status < 0) + break; + status = Write16(state, B_SC_RA_RAM_CO_TD_CAL_8K__A, noiseCal->tdCal8k, 0); + if (status < 0) + break; + } + } while (0); + + return status; +} + +static int DRX_Start(struct drxd_state *state, s32 off) +{ + struct dtv_frontend_properties *p = &state->props; + int status; + + u16 transmissionParams = 0; + u16 operationMode = 0; + u16 qpskTdTpsPwr = 0; + u16 qam16TdTpsPwr = 0; + u16 qam64TdTpsPwr = 0; + u32 feIfIncr = 0; + u32 bandwidth = 0; + int mirrorFreqSpect; + + u16 qpskSnCeGain = 0; + u16 qam16SnCeGain = 0; + u16 qam64SnCeGain = 0; + u16 qpskIsGainMan = 0; + u16 qam16IsGainMan = 0; + u16 qam64IsGainMan = 0; + u16 qpskIsGainExp = 0; + u16 qam16IsGainExp = 0; + u16 qam64IsGainExp = 0; + u16 bandwidthParam = 0; + + if (off < 0) + off = (off - 500) / 1000; + else + off = (off + 500) / 1000; + + do { + if (state->drxd_state != DRXD_STOPPED) + return -1; + status = ResetECOD(state); + if (status < 0) + break; + if (state->type_A) { + status = InitSC(state); + if (status < 0) + break; + } else { + status = InitFT(state); + if (status < 0) + break; + status = InitCP(state); + if (status < 0) + break; + status = InitCE(state); + if (status < 0) + break; + status = InitEQ(state); + if (status < 0) + break; + status = InitSC(state); + if (status < 0) + break; + } + + /* Restore current IF & RF AGC settings */ + + status = SetCfgIfAgc(state, &state->if_agc_cfg); + if (status < 0) + break; + status = SetCfgRfAgc(state, &state->rf_agc_cfg); + if (status < 0) + break; + + mirrorFreqSpect = (state->props.inversion == INVERSION_ON); + + switch (p->transmission_mode) { + default: /* Not set, detect it automatically */ + operationMode |= SC_RA_RAM_OP_AUTO_MODE__M; + /* fall through , try first guess DRX_FFTMODE_8K */ + case TRANSMISSION_MODE_8K: + transmissionParams |= SC_RA_RAM_OP_PARAM_MODE_8K; + if (state->type_A) { + status = Write16(state, EC_SB_REG_TR_MODE__A, EC_SB_REG_TR_MODE_8K, 0x0000); + if (status < 0) + break; + qpskSnCeGain = 99; + qam16SnCeGain = 83; + qam64SnCeGain = 67; + } + break; + case TRANSMISSION_MODE_2K: + transmissionParams |= SC_RA_RAM_OP_PARAM_MODE_2K; + if (state->type_A) { + status = Write16(state, EC_SB_REG_TR_MODE__A, EC_SB_REG_TR_MODE_2K, 0x0000); + if (status < 0) + break; + qpskSnCeGain = 97; + qam16SnCeGain = 71; + qam64SnCeGain = 65; + } + break; + } + + switch (p->guard_interval) { + case GUARD_INTERVAL_1_4: + transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_4; + break; + case GUARD_INTERVAL_1_8: + transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_8; + break; + case GUARD_INTERVAL_1_16: + transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_16; + break; + case GUARD_INTERVAL_1_32: + transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_32; + break; + default: /* Not set, detect it automatically */ + operationMode |= SC_RA_RAM_OP_AUTO_GUARD__M; + /* try first guess 1/4 */ + transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_4; + break; + } + + switch (p->hierarchy) { + case HIERARCHY_1: + transmissionParams |= SC_RA_RAM_OP_PARAM_HIER_A1; + if (state->type_A) { + status = Write16(state, EQ_REG_OT_ALPHA__A, 0x0001, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_ALPHA__A, 0x0001, 0x0000); + if (status < 0) + break; + + qpskTdTpsPwr = EQ_TD_TPS_PWR_UNKNOWN; + qam16TdTpsPwr = EQ_TD_TPS_PWR_QAM16_ALPHA1; + qam64TdTpsPwr = EQ_TD_TPS_PWR_QAM64_ALPHA1; + + qpskIsGainMan = + SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE; + qam16IsGainMan = + SC_RA_RAM_EQ_IS_GAIN_16QAM_MAN__PRE; + qam64IsGainMan = + SC_RA_RAM_EQ_IS_GAIN_64QAM_MAN__PRE; + + qpskIsGainExp = + SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE; + qam16IsGainExp = + SC_RA_RAM_EQ_IS_GAIN_16QAM_EXP__PRE; + qam64IsGainExp = + SC_RA_RAM_EQ_IS_GAIN_64QAM_EXP__PRE; + } + break; + + case HIERARCHY_2: + transmissionParams |= SC_RA_RAM_OP_PARAM_HIER_A2; + if (state->type_A) { + status = Write16(state, EQ_REG_OT_ALPHA__A, 0x0002, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_ALPHA__A, 0x0002, 0x0000); + if (status < 0) + break; + + qpskTdTpsPwr = EQ_TD_TPS_PWR_UNKNOWN; + qam16TdTpsPwr = EQ_TD_TPS_PWR_QAM16_ALPHA2; + qam64TdTpsPwr = EQ_TD_TPS_PWR_QAM64_ALPHA2; + + qpskIsGainMan = + SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE; + qam16IsGainMan = + SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_MAN__PRE; + qam64IsGainMan = + SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_MAN__PRE; + + qpskIsGainExp = + SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE; + qam16IsGainExp = + SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_EXP__PRE; + qam64IsGainExp = + SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_EXP__PRE; + } + break; + case HIERARCHY_4: + transmissionParams |= SC_RA_RAM_OP_PARAM_HIER_A4; + if (state->type_A) { + status = Write16(state, EQ_REG_OT_ALPHA__A, 0x0003, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_ALPHA__A, 0x0003, 0x0000); + if (status < 0) + break; + + qpskTdTpsPwr = EQ_TD_TPS_PWR_UNKNOWN; + qam16TdTpsPwr = EQ_TD_TPS_PWR_QAM16_ALPHA4; + qam64TdTpsPwr = EQ_TD_TPS_PWR_QAM64_ALPHA4; + + qpskIsGainMan = + SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE; + qam16IsGainMan = + SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_MAN__PRE; + qam64IsGainMan = + SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_MAN__PRE; + + qpskIsGainExp = + SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE; + qam16IsGainExp = + SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_EXP__PRE; + qam64IsGainExp = + SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_EXP__PRE; + } + break; + case HIERARCHY_AUTO: + default: + /* Not set, detect it automatically, start with none */ + operationMode |= SC_RA_RAM_OP_AUTO_HIER__M; + transmissionParams |= SC_RA_RAM_OP_PARAM_HIER_NO; + if (state->type_A) { + status = Write16(state, EQ_REG_OT_ALPHA__A, 0x0000, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_ALPHA__A, 0x0000, 0x0000); + if (status < 0) + break; + + qpskTdTpsPwr = EQ_TD_TPS_PWR_QPSK; + qam16TdTpsPwr = EQ_TD_TPS_PWR_QAM16_ALPHAN; + qam64TdTpsPwr = EQ_TD_TPS_PWR_QAM64_ALPHAN; + + qpskIsGainMan = + SC_RA_RAM_EQ_IS_GAIN_QPSK_MAN__PRE; + qam16IsGainMan = + SC_RA_RAM_EQ_IS_GAIN_16QAM_MAN__PRE; + qam64IsGainMan = + SC_RA_RAM_EQ_IS_GAIN_64QAM_MAN__PRE; + + qpskIsGainExp = + SC_RA_RAM_EQ_IS_GAIN_QPSK_EXP__PRE; + qam16IsGainExp = + SC_RA_RAM_EQ_IS_GAIN_16QAM_EXP__PRE; + qam64IsGainExp = + SC_RA_RAM_EQ_IS_GAIN_64QAM_EXP__PRE; + } + break; + } + status = status; + if (status < 0) + break; + + switch (p->modulation) { + default: + operationMode |= SC_RA_RAM_OP_AUTO_CONST__M; + /* fall through , try first guess + DRX_CONSTELLATION_QAM64 */ + case QAM_64: + transmissionParams |= SC_RA_RAM_OP_PARAM_CONST_QAM64; + if (state->type_A) { + status = Write16(state, EQ_REG_OT_CONST__A, 0x0002, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_CONST__A, EC_SB_REG_CONST_64QAM, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_MSB__A, 0x0020, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_BIT2__A, 0x0008, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_LSB__A, 0x0002, 0x0000); + if (status < 0) + break; + + status = Write16(state, EQ_REG_TD_TPS_PWR_OFS__A, qam64TdTpsPwr, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_SN_CEGAIN__A, qam64SnCeGain, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_IS_GAIN_MAN__A, qam64IsGainMan, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_IS_GAIN_EXP__A, qam64IsGainExp, 0x0000); + if (status < 0) + break; + } + break; + case QPSK: + transmissionParams |= SC_RA_RAM_OP_PARAM_CONST_QPSK; + if (state->type_A) { + status = Write16(state, EQ_REG_OT_CONST__A, 0x0000, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_CONST__A, EC_SB_REG_CONST_QPSK, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_MSB__A, 0x0010, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_BIT2__A, 0x0000, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_LSB__A, 0x0000, 0x0000); + if (status < 0) + break; + + status = Write16(state, EQ_REG_TD_TPS_PWR_OFS__A, qpskTdTpsPwr, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_SN_CEGAIN__A, qpskSnCeGain, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_IS_GAIN_MAN__A, qpskIsGainMan, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_IS_GAIN_EXP__A, qpskIsGainExp, 0x0000); + if (status < 0) + break; + } + break; + + case QAM_16: + transmissionParams |= SC_RA_RAM_OP_PARAM_CONST_QAM16; + if (state->type_A) { + status = Write16(state, EQ_REG_OT_CONST__A, 0x0001, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_CONST__A, EC_SB_REG_CONST_16QAM, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_MSB__A, 0x0010, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_BIT2__A, 0x0004, 0x0000); + if (status < 0) + break; + status = Write16(state, EC_SB_REG_SCALE_LSB__A, 0x0000, 0x0000); + if (status < 0) + break; + + status = Write16(state, EQ_REG_TD_TPS_PWR_OFS__A, qam16TdTpsPwr, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_SN_CEGAIN__A, qam16SnCeGain, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_IS_GAIN_MAN__A, qam16IsGainMan, 0x0000); + if (status < 0) + break; + status = Write16(state, EQ_REG_IS_GAIN_EXP__A, qam16IsGainExp, 0x0000); + if (status < 0) + break; + } + break; + + } + status = status; + if (status < 0) + break; + + switch (DRX_CHANNEL_HIGH) { + default: + case DRX_CHANNEL_AUTO: + case DRX_CHANNEL_LOW: + transmissionParams |= SC_RA_RAM_OP_PARAM_PRIO_LO; + status = Write16(state, EC_SB_REG_PRIOR__A, EC_SB_REG_PRIOR_LO, 0x0000); + if (status < 0) + break; + break; + case DRX_CHANNEL_HIGH: + transmissionParams |= SC_RA_RAM_OP_PARAM_PRIO_HI; + status = Write16(state, EC_SB_REG_PRIOR__A, EC_SB_REG_PRIOR_HI, 0x0000); + if (status < 0) + break; + break; + + } + + switch (p->code_rate_HP) { + case FEC_1_2: + transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_1_2; + if (state->type_A) { + status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C1_2, 0x0000); + if (status < 0) + break; + } + break; + default: + operationMode |= SC_RA_RAM_OP_AUTO_RATE__M; + case FEC_2_3: + transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_2_3; + if (state->type_A) { + status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C2_3, 0x0000); + if (status < 0) + break; + } + break; + case FEC_3_4: + transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_3_4; + if (state->type_A) { + status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C3_4, 0x0000); + if (status < 0) + break; + } + break; + case FEC_5_6: + transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_5_6; + if (state->type_A) { + status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C5_6, 0x0000); + if (status < 0) + break; + } + break; + case FEC_7_8: + transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_7_8; + if (state->type_A) { + status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C7_8, 0x0000); + if (status < 0) + break; + } + break; + } + status = status; + if (status < 0) + break; + + /* First determine real bandwidth (Hz) */ + /* Also set delay for impulse noise cruncher (only A2) */ + /* Also set parameters for EC_OC fix, note + EC_OC_REG_TMD_HIL_MAR is changed + by SC for fix for some 8K,1/8 guard but is restored by + InitEC and ResetEC + functions */ + switch (p->bandwidth_hz) { + case 0: + p->bandwidth_hz = 8000000; + /* fall through */ + case 8000000: + /* (64/7)*(8/8)*1000000 */ + bandwidth = DRXD_BANDWIDTH_8MHZ_IN_HZ; + + bandwidthParam = 0; + status = Write16(state, + FE_AG_REG_IND_DEL__A, 50, 0x0000); + break; + case 7000000: + /* (64/7)*(7/8)*1000000 */ + bandwidth = DRXD_BANDWIDTH_7MHZ_IN_HZ; + bandwidthParam = 0x4807; /*binary:0100 1000 0000 0111 */ + status = Write16(state, + FE_AG_REG_IND_DEL__A, 59, 0x0000); + break; + case 6000000: + /* (64/7)*(6/8)*1000000 */ + bandwidth = DRXD_BANDWIDTH_6MHZ_IN_HZ; + bandwidthParam = 0x0F07; /*binary: 0000 1111 0000 0111 */ + status = Write16(state, + FE_AG_REG_IND_DEL__A, 71, 0x0000); + break; + default: + status = -EINVAL; + } + if (status < 0) + break; + + status = Write16(state, SC_RA_RAM_BAND__A, bandwidthParam, 0x0000); + if (status < 0) + break; + + { + u16 sc_config; + status = Read16(state, SC_RA_RAM_CONFIG__A, &sc_config, 0); + if (status < 0) + break; + + /* enable SLAVE mode in 2k 1/32 to + prevent timing change glitches */ + if ((p->transmission_mode == TRANSMISSION_MODE_2K) && + (p->guard_interval == GUARD_INTERVAL_1_32)) { + /* enable slave */ + sc_config |= SC_RA_RAM_CONFIG_SLAVE__M; + } else { + /* disable slave */ + sc_config &= ~SC_RA_RAM_CONFIG_SLAVE__M; + } + status = Write16(state, SC_RA_RAM_CONFIG__A, sc_config, 0); + if (status < 0) + break; + } + + status = SetCfgNoiseCalibration(state, &state->noise_cal); + if (status < 0) + break; + + if (state->cscd_state == CSCD_INIT) { + /* switch on SRMM scan in SC */ + status = Write16(state, SC_RA_RAM_SAMPLE_RATE_COUNT__A, DRXD_OSCDEV_DO_SCAN, 0x0000); + if (status < 0) + break; +/* CHK_ERROR(Write16(SC_RA_RAM_SAMPLE_RATE_STEP__A, DRXD_OSCDEV_STEP, 0x0000));*/ + state->cscd_state = CSCD_SET; + } + + /* Now compute FE_IF_REG_INCR */ + /*((( SysFreq/BandWidth)/2)/2) -1) * 2^23) => + ((SysFreq / BandWidth) * (2^21) ) - (2^23) */ + feIfIncr = MulDiv32(state->sys_clock_freq * 1000, + (1ULL << 21), bandwidth) - (1 << 23); + status = Write16(state, FE_IF_REG_INCR0__A, (u16) (feIfIncr & FE_IF_REG_INCR0__M), 0x0000); + if (status < 0) + break; + status = Write16(state, FE_IF_REG_INCR1__A, (u16) ((feIfIncr >> FE_IF_REG_INCR0__W) & FE_IF_REG_INCR1__M), 0x0000); + if (status < 0) + break; + /* Bandwidth setting done */ + + /* Mirror & frequency offset */ + SetFrequencyShift(state, off, mirrorFreqSpect); + + /* Start SC, write channel settings to SC */ + + /* Enable SC after setting all other parameters */ + status = Write16(state, SC_COMM_STATE__A, 0, 0x0000); + if (status < 0) + break; + status = Write16(state, SC_COMM_EXEC__A, 1, 0x0000); + if (status < 0) + break; + + /* Write SC parameter registers, operation mode */ +#if 1 + operationMode = (SC_RA_RAM_OP_AUTO_MODE__M | + SC_RA_RAM_OP_AUTO_GUARD__M | + SC_RA_RAM_OP_AUTO_CONST__M | + SC_RA_RAM_OP_AUTO_HIER__M | + SC_RA_RAM_OP_AUTO_RATE__M); +#endif + status = SC_SetPrefParamCommand(state, 0x0000, transmissionParams, operationMode); + if (status < 0) + break; + + /* Start correct processes to get in lock */ + status = SC_ProcStartCommand(state, SC_RA_RAM_PROC_LOCKTRACK, SC_RA_RAM_SW_EVENT_RUN_NMASK__M, SC_RA_RAM_LOCKTRACK_MIN); + if (status < 0) + break; + + status = StartOC(state); + if (status < 0) + break; + + if (state->operation_mode != OM_Default) { + status = StartDiversity(state); + if (status < 0) + break; + } + + state->drxd_state = DRXD_STARTED; + } while (0); + + return status; +} + +static int CDRXD(struct drxd_state *state, u32 IntermediateFrequency) +{ + u32 ulRfAgcOutputLevel = 0xffffffff; + u32 ulRfAgcSettleLevel = 528; /* Optimum value for MT2060 */ + u32 ulRfAgcMinLevel = 0; /* Currently unused */ + u32 ulRfAgcMaxLevel = DRXD_FE_CTRL_MAX; /* Currently unused */ + u32 ulRfAgcSpeed = 0; /* Currently unused */ + u32 ulRfAgcMode = 0; /*2; Off */ + u32 ulRfAgcR1 = 820; + u32 ulRfAgcR2 = 2200; + u32 ulRfAgcR3 = 150; + u32 ulIfAgcMode = 0; /* Auto */ + u32 ulIfAgcOutputLevel = 0xffffffff; + u32 ulIfAgcSettleLevel = 0xffffffff; + u32 ulIfAgcMinLevel = 0xffffffff; + u32 ulIfAgcMaxLevel = 0xffffffff; + u32 ulIfAgcSpeed = 0xffffffff; + u32 ulIfAgcR1 = 820; + u32 ulIfAgcR2 = 2200; + u32 ulIfAgcR3 = 150; + u32 ulClock = state->config.clock; + u32 ulSerialMode = 0; + u32 ulEcOcRegOcModeLop = 4; /* Dynamic DTO source */ + u32 ulHiI2cDelay = HI_I2C_DELAY; + u32 ulHiI2cBridgeDelay = HI_I2C_BRIDGE_DELAY; + u32 ulHiI2cPatch = 0; + u32 ulEnvironment = APPENV_PORTABLE; + u32 ulEnvironmentDiversity = APPENV_MOBILE; + u32 ulIFFilter = IFFILTER_SAW; + + state->if_agc_cfg.ctrlMode = AGC_CTRL_AUTO; + state->if_agc_cfg.outputLevel = 0; + state->if_agc_cfg.settleLevel = 140; + state->if_agc_cfg.minOutputLevel = 0; + state->if_agc_cfg.maxOutputLevel = 1023; + state->if_agc_cfg.speed = 904; + + if (ulIfAgcMode == 1 && ulIfAgcOutputLevel <= DRXD_FE_CTRL_MAX) { + state->if_agc_cfg.ctrlMode = AGC_CTRL_USER; + state->if_agc_cfg.outputLevel = (u16) (ulIfAgcOutputLevel); + } + + if (ulIfAgcMode == 0 && + ulIfAgcSettleLevel <= DRXD_FE_CTRL_MAX && + ulIfAgcMinLevel <= DRXD_FE_CTRL_MAX && + ulIfAgcMaxLevel <= DRXD_FE_CTRL_MAX && + ulIfAgcSpeed <= DRXD_FE_CTRL_MAX) { + state->if_agc_cfg.ctrlMode = AGC_CTRL_AUTO; + state->if_agc_cfg.settleLevel = (u16) (ulIfAgcSettleLevel); + state->if_agc_cfg.minOutputLevel = (u16) (ulIfAgcMinLevel); + state->if_agc_cfg.maxOutputLevel = (u16) (ulIfAgcMaxLevel); + state->if_agc_cfg.speed = (u16) (ulIfAgcSpeed); + } + + state->if_agc_cfg.R1 = (u16) (ulIfAgcR1); + state->if_agc_cfg.R2 = (u16) (ulIfAgcR2); + state->if_agc_cfg.R3 = (u16) (ulIfAgcR3); + + state->rf_agc_cfg.R1 = (u16) (ulRfAgcR1); + state->rf_agc_cfg.R2 = (u16) (ulRfAgcR2); + state->rf_agc_cfg.R3 = (u16) (ulRfAgcR3); + + state->rf_agc_cfg.ctrlMode = AGC_CTRL_AUTO; + /* rest of the RFAgcCfg structure currently unused */ + if (ulRfAgcMode == 1 && ulRfAgcOutputLevel <= DRXD_FE_CTRL_MAX) { + state->rf_agc_cfg.ctrlMode = AGC_CTRL_USER; + state->rf_agc_cfg.outputLevel = (u16) (ulRfAgcOutputLevel); + } + + if (ulRfAgcMode == 0 && + ulRfAgcSettleLevel <= DRXD_FE_CTRL_MAX && + ulRfAgcMinLevel <= DRXD_FE_CTRL_MAX && + ulRfAgcMaxLevel <= DRXD_FE_CTRL_MAX && + ulRfAgcSpeed <= DRXD_FE_CTRL_MAX) { + state->rf_agc_cfg.ctrlMode = AGC_CTRL_AUTO; + state->rf_agc_cfg.settleLevel = (u16) (ulRfAgcSettleLevel); + state->rf_agc_cfg.minOutputLevel = (u16) (ulRfAgcMinLevel); + state->rf_agc_cfg.maxOutputLevel = (u16) (ulRfAgcMaxLevel); + state->rf_agc_cfg.speed = (u16) (ulRfAgcSpeed); + } + + if (ulRfAgcMode == 2) + state->rf_agc_cfg.ctrlMode = AGC_CTRL_OFF; + + if (ulEnvironment <= 2) + state->app_env_default = (enum app_env) + (ulEnvironment); + if (ulEnvironmentDiversity <= 2) + state->app_env_diversity = (enum app_env) + (ulEnvironmentDiversity); + + if (ulIFFilter == IFFILTER_DISCRETE) { + /* discrete filter */ + state->noise_cal.cpOpt = 0; + state->noise_cal.cpNexpOfs = 40; + state->noise_cal.tdCal2k = -40; + state->noise_cal.tdCal8k = -24; + } else { + /* SAW filter */ + state->noise_cal.cpOpt = 1; + state->noise_cal.cpNexpOfs = 0; + state->noise_cal.tdCal2k = -21; + state->noise_cal.tdCal8k = -24; + } + state->m_EcOcRegOcModeLop = (u16) (ulEcOcRegOcModeLop); + + state->chip_adr = (state->config.demod_address << 1) | 1; + switch (ulHiI2cPatch) { + case 1: + state->m_HiI2cPatch = DRXD_HiI2cPatch_1; + break; + case 3: + state->m_HiI2cPatch = DRXD_HiI2cPatch_3; + break; + default: + state->m_HiI2cPatch = NULL; + } + + /* modify tuner and clock attributes */ + state->intermediate_freq = (u16) (IntermediateFrequency / 1000); + /* expected system clock frequency in kHz */ + state->expected_sys_clock_freq = 48000; + /* real system clock frequency in kHz */ + state->sys_clock_freq = 48000; + state->osc_clock_freq = (u16) ulClock; + state->osc_clock_deviation = 0; + state->cscd_state = CSCD_INIT; + state->drxd_state = DRXD_UNINITIALIZED; + + state->PGA = 0; + state->type_A = 0; + state->tuner_mirrors = 0; + + /* modify MPEG output attributes */ + state->insert_rs_byte = state->config.insert_rs_byte; + state->enable_parallel = (ulSerialMode != 1); + + /* Timing div, 250ns/Psys */ + /* Timing div, = ( delay (nano seconds) * sysclk (kHz) )/ 1000 */ + + state->hi_cfg_timing_div = (u16) ((state->sys_clock_freq / 1000) * + ulHiI2cDelay) / 1000; + /* Bridge delay, uses oscilator clock */ + /* Delay = ( delay (nano seconds) * oscclk (kHz) )/ 1000 */ + state->hi_cfg_bridge_delay = (u16) ((state->osc_clock_freq / 1000) * + ulHiI2cBridgeDelay) / 1000; + + state->m_FeAgRegAgPwd = DRXD_DEF_AG_PWD_CONSUMER; + /* state->m_FeAgRegAgPwd = DRXD_DEF_AG_PWD_PRO; */ + state->m_FeAgRegAgAgcSio = DRXD_DEF_AG_AGC_SIO; + return 0; +} + +static int DRXD_init(struct drxd_state *state, const u8 *fw, u32 fw_size) +{ + int status = 0; + u32 driverVersion; + + if (state->init_done) + return 0; + + CDRXD(state, state->config.IF ? state->config.IF : 36000000); + + do { + state->operation_mode = OM_Default; + + status = SetDeviceTypeId(state); + if (status < 0) + break; + + /* Apply I2c address patch to B1 */ + if (!state->type_A && state->m_HiI2cPatch != NULL) + status = WriteTable(state, state->m_HiI2cPatch); + if (status < 0) + break; + + if (state->type_A) { + /* HI firmware patch for UIO readout, + avoid clearing of result register */ + status = Write16(state, 0x43012D, 0x047f, 0); + if (status < 0) + break; + } + + status = HI_ResetCommand(state); + if (status < 0) + break; + + status = StopAllProcessors(state); + if (status < 0) + break; + status = InitCC(state); + if (status < 0) + break; + + state->osc_clock_deviation = 0; + + if (state->config.osc_deviation) + state->osc_clock_deviation = + state->config.osc_deviation(state->priv, 0, 0); + { + /* Handle clock deviation */ + s32 devB; + s32 devA = (s32) (state->osc_clock_deviation) * + (s32) (state->expected_sys_clock_freq); + /* deviation in kHz */ + s32 deviation = (devA / (1000000L)); + /* rounding, signed */ + if (devA > 0) + devB = (2); + else + devB = (-2); + if ((devB * (devA % 1000000L) > 1000000L)) { + /* add +1 or -1 */ + deviation += (devB / 2); + } + + state->sys_clock_freq = + (u16) ((state->expected_sys_clock_freq) + + deviation); + } + status = InitHI(state); + if (status < 0) + break; + status = InitAtomicRead(state); + if (status < 0) + break; + + status = EnableAndResetMB(state); + if (status < 0) + break; + if (state->type_A) + status = ResetCEFR(state); + if (status < 0) + break; + + if (fw) { + status = DownloadMicrocode(state, fw, fw_size); + if (status < 0) + break; + } else { + status = DownloadMicrocode(state, state->microcode, state->microcode_length); + if (status < 0) + break; + } + + if (state->PGA) { + state->m_FeAgRegAgPwd = DRXD_DEF_AG_PWD_PRO; + SetCfgPga(state, 0); /* PGA = 0 dB */ + } else { + state->m_FeAgRegAgPwd = DRXD_DEF_AG_PWD_CONSUMER; + } + + state->m_FeAgRegAgAgcSio = DRXD_DEF_AG_AGC_SIO; + + status = InitFE(state); + if (status < 0) + break; + status = InitFT(state); + if (status < 0) + break; + status = InitCP(state); + if (status < 0) + break; + status = InitCE(state); + if (status < 0) + break; + status = InitEQ(state); + if (status < 0) + break; + status = InitEC(state); + if (status < 0) + break; + status = InitSC(state); + if (status < 0) + break; + + status = SetCfgIfAgc(state, &state->if_agc_cfg); + if (status < 0) + break; + status = SetCfgRfAgc(state, &state->rf_agc_cfg); + if (status < 0) + break; + + state->cscd_state = CSCD_INIT; + status = Write16(state, SC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + status = Write16(state, LC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0); + if (status < 0) + break; + + driverVersion = (((VERSION_MAJOR / 10) << 4) + + (VERSION_MAJOR % 10)) << 24; + driverVersion += (((VERSION_MINOR / 10) << 4) + + (VERSION_MINOR % 10)) << 16; + driverVersion += ((VERSION_PATCH / 1000) << 12) + + ((VERSION_PATCH / 100) << 8) + + ((VERSION_PATCH / 10) << 4) + (VERSION_PATCH % 10); + + status = Write32(state, SC_RA_RAM_DRIVER_VERSION__AX, driverVersion, 0); + if (status < 0) + break; + + status = StopOC(state); + if (status < 0) + break; + + state->drxd_state = DRXD_STOPPED; + state->init_done = 1; + status = 0; + } while (0); + return status; +} + +static int DRXD_status(struct drxd_state *state, u32 *pLockStatus) +{ + DRX_GetLockStatus(state, pLockStatus); + + /*if (*pLockStatus&DRX_LOCK_MPEG) */ + if (*pLockStatus & DRX_LOCK_FEC) { + ConfigureMPEGOutput(state, 1); + /* Get status again, in case we have MPEG lock now */ + /*DRX_GetLockStatus(state, pLockStatus); */ + } + + return 0; +} + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static int drxd_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +{ + struct drxd_state *state = fe->demodulator_priv; + u32 value; + int res; + + res = ReadIFAgc(state, &value); + if (res < 0) + *strength = 0; + else + *strength = 0xffff - (value << 4); + return 0; +} + +static int drxd_read_status(struct dvb_frontend *fe, fe_status_t * status) +{ + struct drxd_state *state = fe->demodulator_priv; + u32 lock; + + DRXD_status(state, &lock); + *status = 0; + /* No MPEG lock in V255 firmware, bug ? */ +#if 1 + if (lock & DRX_LOCK_MPEG) + *status |= FE_HAS_LOCK; +#else + if (lock & DRX_LOCK_FEC) + *status |= FE_HAS_LOCK; +#endif + if (lock & DRX_LOCK_FEC) + *status |= FE_HAS_VITERBI | FE_HAS_SYNC; + if (lock & DRX_LOCK_DEMOD) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + + return 0; +} + +static int drxd_init(struct dvb_frontend *fe) +{ + struct drxd_state *state = fe->demodulator_priv; + int err = 0; + +/* if (request_firmware(&state->fw, "drxd.fw", state->dev)<0) */ + return DRXD_init(state, 0, 0); + + err = DRXD_init(state, state->fw->data, state->fw->size); + release_firmware(state->fw); + return err; +} + +int drxd_config_i2c(struct dvb_frontend *fe, int onoff) +{ + struct drxd_state *state = fe->demodulator_priv; + + if (state->config.disable_i2c_gate_ctrl == 1) + return 0; + + return DRX_ConfigureI2CBridge(state, onoff); +} +EXPORT_SYMBOL(drxd_config_i2c); + +static int drxd_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *sets) +{ + sets->min_delay_ms = 10000; + sets->max_drift = 0; + sets->step_size = 0; + return 0; +} + +static int drxd_read_ber(struct dvb_frontend *fe, u32 * ber) +{ + *ber = 0; + return 0; +} + +static int drxd_read_snr(struct dvb_frontend *fe, u16 * snr) +{ + *snr = 0; + return 0; +} + +static int drxd_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int drxd_sleep(struct dvb_frontend *fe) +{ + struct drxd_state *state = fe->demodulator_priv; + + ConfigureMPEGOutput(state, 0); + return 0; +} + +static int drxd_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + return drxd_config_i2c(fe, enable); +} + +static int drxd_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct drxd_state *state = fe->demodulator_priv; + s32 off = 0; + + state->props = *p; + DRX_Stop(state); + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + msleep(200); + + return DRX_Start(state, off); +} + +static void drxd_release(struct dvb_frontend *fe) +{ + struct drxd_state *state = fe->demodulator_priv; + + kfree(state); +} + +static struct dvb_frontend_ops drxd_ops = { + .delsys = { SYS_DVBT}, + .info = { + .name = "Micronas DRXD DVB-T", + .frequency_min = 47125000, + .frequency_max = 855250000, + .frequency_stepsize = 166667, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | FE_CAN_MUTE_TS}, + + .release = drxd_release, + .init = drxd_init, + .sleep = drxd_sleep, + .i2c_gate_ctrl = drxd_i2c_gate_ctrl, + + .set_frontend = drxd_set_frontend, + .get_tune_settings = drxd_get_tune_settings, + + .read_status = drxd_read_status, + .read_ber = drxd_read_ber, + .read_signal_strength = drxd_read_signal_strength, + .read_snr = drxd_read_snr, + .read_ucblocks = drxd_read_ucblocks, +}; + +struct dvb_frontend *drxd_attach(const struct drxd_config *config, + void *priv, struct i2c_adapter *i2c, + struct device *dev) +{ + struct drxd_state *state = NULL; + + state = kmalloc(sizeof(struct drxd_state), GFP_KERNEL); + if (!state) + return NULL; + memset(state, 0, sizeof(*state)); + + state->ops = drxd_ops; + state->dev = dev; + state->config = *config; + state->i2c = i2c; + state->priv = priv; + + mutex_init(&state->mutex); + + if (Read16(state, 0, 0, 0) < 0) + goto error; + + state->frontend.ops = drxd_ops; + state->frontend.demodulator_priv = state; + ConfigureMPEGOutput(state, 0); + /* add few initialization to allow gate control */ + CDRXD(state, state->config.IF ? state->config.IF : 36000000); + InitHI(state); + + return &state->frontend; + +error: + printk(KERN_ERR "drxd: not found\n"); + kfree(state); + return NULL; +} +EXPORT_SYMBOL(drxd_attach); + +MODULE_DESCRIPTION("DRXD driver"); +MODULE_AUTHOR("Micronas"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/drxd_map_firm.h b/drivers/media/dvb-frontends/drxd_map_firm.h new file mode 100644 index 00000000..6bc553ab --- /dev/null +++ b/drivers/media/dvb-frontends/drxd_map_firm.h @@ -0,0 +1,1013 @@ +/* + * drx3973d_map_firm.h + * + * Copyright (C) 2006-2007 Micronas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DRX3973D_MAP__H__ +#define __DRX3973D_MAP__H__ + +/* + * Note: originally, this file contained 12000+ lines of data + * Probably a few lines for every firwmare assembler instruction. However, + * only a few defines were actually used. So, removed all uneeded lines. + * If ever needed, the other lines can be easily obtained via git history. + */ + +#define HI_COMM_EXEC__A 0x400000 +#define HI_COMM_MB__A 0x400002 +#define HI_CT_REG_COMM_STATE__A 0x410001 +#define HI_RA_RAM_SRV_RES__A 0x420031 +#define HI_RA_RAM_SRV_CMD__A 0x420032 +#define HI_RA_RAM_SRV_CMD_RESET 0x2 +#define HI_RA_RAM_SRV_CMD_CONFIG 0x3 +#define HI_RA_RAM_SRV_CMD_EXECUTE 0x6 +#define HI_RA_RAM_SRV_RST_KEY__A 0x420033 +#define HI_RA_RAM_SRV_RST_KEY_ACT 0x3973 +#define HI_RA_RAM_SRV_CFG_KEY__A 0x420033 +#define HI_RA_RAM_SRV_CFG_DIV__A 0x420034 +#define HI_RA_RAM_SRV_CFG_BDL__A 0x420035 +#define HI_RA_RAM_SRV_CFG_WUP__A 0x420036 +#define HI_RA_RAM_SRV_CFG_ACT__A 0x420037 +#define HI_RA_RAM_SRV_CFG_ACT_SLV0_ON 0x1 +#define HI_RA_RAM_SRV_CFG_ACT_BRD__M 0x4 +#define HI_RA_RAM_SRV_CFG_ACT_BRD_OFF 0x0 +#define HI_RA_RAM_SRV_CFG_ACT_BRD_ON 0x4 +#define HI_RA_RAM_SRV_CFG_ACT_PWD_EXE 0x8 +#define HI_RA_RAM_USR_BEGIN__A 0x420040 +#define HI_IF_RAM_TRP_BPT0__AX 0x430000 +#define HI_IF_RAM_USR_BEGIN__A 0x430200 +#define SC_COMM_EXEC__A 0x800000 +#define SC_COMM_EXEC_CTL_STOP 0x0 +#define SC_COMM_STATE__A 0x800001 +#define SC_RA_RAM_PARAM0__A 0x820040 +#define SC_RA_RAM_PARAM1__A 0x820041 +#define SC_RA_RAM_CMD_ADDR__A 0x820042 +#define SC_RA_RAM_CMD__A 0x820043 +#define SC_RA_RAM_CMD_PROC_START 0x1 +#define SC_RA_RAM_CMD_SET_PREF_PARAM 0x3 +#define SC_RA_RAM_CMD_GET_OP_PARAM 0x5 +#define SC_RA_RAM_SW_EVENT_RUN_NMASK__M 0x1 +#define SC_RA_RAM_LOCKTRACK_MIN 0x1 +#define SC_RA_RAM_OP_PARAM_MODE_2K 0x0 +#define SC_RA_RAM_OP_PARAM_MODE_8K 0x1 +#define SC_RA_RAM_OP_PARAM_GUARD_32 0x0 +#define SC_RA_RAM_OP_PARAM_GUARD_16 0x4 +#define SC_RA_RAM_OP_PARAM_GUARD_8 0x8 +#define SC_RA_RAM_OP_PARAM_GUARD_4 0xC +#define SC_RA_RAM_OP_PARAM_CONST_QPSK 0x0 +#define SC_RA_RAM_OP_PARAM_CONST_QAM16 0x10 +#define SC_RA_RAM_OP_PARAM_CONST_QAM64 0x20 +#define SC_RA_RAM_OP_PARAM_HIER_NO 0x0 +#define SC_RA_RAM_OP_PARAM_HIER_A1 0x40 +#define SC_RA_RAM_OP_PARAM_HIER_A2 0x80 +#define SC_RA_RAM_OP_PARAM_HIER_A4 0xC0 +#define SC_RA_RAM_OP_PARAM_RATE_1_2 0x0 +#define SC_RA_RAM_OP_PARAM_RATE_2_3 0x200 +#define SC_RA_RAM_OP_PARAM_RATE_3_4 0x400 +#define SC_RA_RAM_OP_PARAM_RATE_5_6 0x600 +#define SC_RA_RAM_OP_PARAM_RATE_7_8 0x800 +#define SC_RA_RAM_OP_PARAM_PRIO_HI 0x0 +#define SC_RA_RAM_OP_PARAM_PRIO_LO 0x1000 +#define SC_RA_RAM_OP_AUTO_MODE__M 0x1 +#define SC_RA_RAM_OP_AUTO_GUARD__M 0x2 +#define SC_RA_RAM_OP_AUTO_CONST__M 0x4 +#define SC_RA_RAM_OP_AUTO_HIER__M 0x8 +#define SC_RA_RAM_OP_AUTO_RATE__M 0x10 +#define SC_RA_RAM_LOCK__A 0x82004B +#define SC_RA_RAM_LOCK_DEMOD__M 0x1 +#define SC_RA_RAM_LOCK_FEC__M 0x2 +#define SC_RA_RAM_LOCK_MPEG__M 0x4 +#define SC_RA_RAM_BE_OPT_ENA__A 0x82004C +#define SC_RA_RAM_BE_OPT_ENA_CP_OPT 0x1 +#define SC_RA_RAM_BE_OPT_DELAY__A 0x82004D +#define SC_RA_RAM_CONFIG__A 0x820050 +#define SC_RA_RAM_CONFIG_FR_ENABLE__M 0x4 +#define SC_RA_RAM_CONFIG_FREQSCAN__M 0x10 +#define SC_RA_RAM_CONFIG_SLAVE__M 0x20 +#define SC_RA_RAM_IF_SAVE__AX 0x82008E +#define SC_RA_RAM_IR_COARSE_2K_LENGTH__A 0x8200D1 +#define SC_RA_RAM_IR_COARSE_2K_LENGTH__PRE 0x9 +#define SC_RA_RAM_IR_COARSE_2K_FREQINC__A 0x8200D2 +#define SC_RA_RAM_IR_COARSE_2K_FREQINC__PRE 0x4 +#define SC_RA_RAM_IR_COARSE_2K_KAISINC__A 0x8200D3 +#define SC_RA_RAM_IR_COARSE_2K_KAISINC__PRE 0x100 +#define SC_RA_RAM_IR_COARSE_8K_LENGTH__A 0x8200D4 +#define SC_RA_RAM_IR_COARSE_8K_LENGTH__PRE 0x8 +#define SC_RA_RAM_IR_COARSE_8K_FREQINC__A 0x8200D5 +#define SC_RA_RAM_IR_COARSE_8K_FREQINC__PRE 0x8 +#define SC_RA_RAM_IR_COARSE_8K_KAISINC__A 0x8200D6 +#define SC_RA_RAM_IR_COARSE_8K_KAISINC__PRE 0x200 +#define SC_RA_RAM_IR_FINE_2K_LENGTH__A 0x8200D7 +#define SC_RA_RAM_IR_FINE_2K_LENGTH__PRE 0x9 +#define SC_RA_RAM_IR_FINE_2K_FREQINC__A 0x8200D8 +#define SC_RA_RAM_IR_FINE_2K_FREQINC__PRE 0x4 +#define SC_RA_RAM_IR_FINE_2K_KAISINC__A 0x8200D9 +#define SC_RA_RAM_IR_FINE_2K_KAISINC__PRE 0x100 +#define SC_RA_RAM_IR_FINE_8K_LENGTH__A 0x8200DA +#define SC_RA_RAM_IR_FINE_8K_LENGTH__PRE 0xB +#define SC_RA_RAM_IR_FINE_8K_FREQINC__A 0x8200DB +#define SC_RA_RAM_IR_FINE_8K_FREQINC__PRE 0x1 +#define SC_RA_RAM_IR_FINE_8K_KAISINC__A 0x8200DC +#define SC_RA_RAM_IR_FINE_8K_KAISINC__PRE 0x40 +#define SC_RA_RAM_ECHO_SHIFT_LIM__A 0x8200DD +#define SC_RA_RAM_SAMPLE_RATE_COUNT__A 0x8200E8 +#define SC_RA_RAM_SAMPLE_RATE_STEP__A 0x8200E9 +#define SC_RA_RAM_BAND__A 0x8200EC +#define SC_RA_RAM_LC_ABS_2K__A 0x8200F4 +#define SC_RA_RAM_LC_ABS_2K__PRE 0x1F +#define SC_RA_RAM_LC_ABS_8K__A 0x8200F5 +#define SC_RA_RAM_LC_ABS_8K__PRE 0x1F +#define SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE 0x1D6 +#define SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE 0x4 +#define SC_RA_RAM_EQ_IS_GAIN_QPSK_MAN__PRE 0x1BB +#define SC_RA_RAM_EQ_IS_GAIN_QPSK_EXP__PRE 0x5 +#define SC_RA_RAM_EQ_IS_GAIN_16QAM_MAN__PRE 0x1EF +#define SC_RA_RAM_EQ_IS_GAIN_16QAM_EXP__PRE 0x5 +#define SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_MAN__PRE 0x15E +#define SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_EXP__PRE 0x5 +#define SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_MAN__PRE 0x11A +#define SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_EXP__PRE 0x6 +#define SC_RA_RAM_EQ_IS_GAIN_64QAM_MAN__PRE 0x1FB +#define SC_RA_RAM_EQ_IS_GAIN_64QAM_EXP__PRE 0x5 +#define SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_MAN__PRE 0x12F +#define SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_EXP__PRE 0x5 +#define SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_MAN__PRE 0x197 +#define SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_EXP__PRE 0x5 +#define SC_RA_RAM_DRIVER_VERSION__AX 0x8201FE +#define SC_RA_RAM_PROC_LOCKTRACK 0x0 +#define FE_COMM_EXEC__A 0xC00000 +#define FE_AD_REG_COMM_EXEC__A 0xC10000 +#define FE_AD_REG_FDB_IN__A 0xC10012 +#define FE_AD_REG_PD__A 0xC10013 +#define FE_AD_REG_INVEXT__A 0xC10014 +#define FE_AD_REG_CLKNEG__A 0xC10015 +#define FE_AG_REG_COMM_EXEC__A 0xC20000 +#define FE_AG_REG_AG_MODE_LOP__A 0xC20010 +#define FE_AG_REG_AG_MODE_LOP_MODE_4__M 0x10 +#define FE_AG_REG_AG_MODE_LOP_MODE_4_STATIC 0x0 +#define FE_AG_REG_AG_MODE_LOP_MODE_4_DYNAMIC 0x10 +#define FE_AG_REG_AG_MODE_LOP_MODE_5__M 0x20 +#define FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC 0x0 +#define FE_AG_REG_AG_MODE_LOP_MODE_C__M 0x1000 +#define FE_AG_REG_AG_MODE_LOP_MODE_C_STATIC 0x0 +#define FE_AG_REG_AG_MODE_LOP_MODE_C_DYNAMIC 0x1000 +#define FE_AG_REG_AG_MODE_LOP_MODE_E__M 0x4000 +#define FE_AG_REG_AG_MODE_LOP_MODE_E_STATIC 0x0 +#define FE_AG_REG_AG_MODE_LOP_MODE_E_DYNAMIC 0x4000 +#define FE_AG_REG_AG_MODE_HIP__A 0xC20011 +#define FE_AG_REG_AG_PGA_MODE__A 0xC20012 +#define FE_AG_REG_AG_PGA_MODE_PFY_PCY_AFY_REN 0x0 +#define FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN 0x1 +#define FE_AG_REG_AG_AGC_SIO__A 0xC20013 +#define FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M 0x2 +#define FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_OUTPUT 0x0 +#define FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_INPUT 0x2 +#define FE_AG_REG_AG_PWD__A 0xC20015 +#define FE_AG_REG_AG_PWD_PWD_PD2__M 0x2 +#define FE_AG_REG_AG_PWD_PWD_PD2_DISABLE 0x0 +#define FE_AG_REG_AG_PWD_PWD_PD2_ENABLE 0x2 +#define FE_AG_REG_DCE_AUR_CNT__A 0xC20016 +#define FE_AG_REG_DCE_RUR_CNT__A 0xC20017 +#define FE_AG_REG_ACE_AUR_CNT__A 0xC2001A +#define FE_AG_REG_ACE_RUR_CNT__A 0xC2001B +#define FE_AG_REG_CDR_RUR_CNT__A 0xC20020 +#define FE_AG_REG_EGC_RUR_CNT__A 0xC20024 +#define FE_AG_REG_EGC_SET_LVL__A 0xC20025 +#define FE_AG_REG_EGC_SET_LVL__M 0x1FF +#define FE_AG_REG_EGC_FLA_RGN__A 0xC20026 +#define FE_AG_REG_EGC_SLO_RGN__A 0xC20027 +#define FE_AG_REG_EGC_JMP_PSN__A 0xC20028 +#define FE_AG_REG_EGC_FLA_INC__A 0xC20029 +#define FE_AG_REG_EGC_FLA_DEC__A 0xC2002A +#define FE_AG_REG_EGC_SLO_INC__A 0xC2002B +#define FE_AG_REG_EGC_SLO_DEC__A 0xC2002C +#define FE_AG_REG_EGC_FAS_INC__A 0xC2002D +#define FE_AG_REG_EGC_FAS_DEC__A 0xC2002E +#define FE_AG_REG_PM1_AGC_WRI__A 0xC20030 +#define FE_AG_REG_PM1_AGC_WRI__M 0x7FF +#define FE_AG_REG_GC1_AGC_RIC__A 0xC20031 +#define FE_AG_REG_GC1_AGC_OFF__A 0xC20032 +#define FE_AG_REG_GC1_AGC_MAX__A 0xC20033 +#define FE_AG_REG_GC1_AGC_MIN__A 0xC20034 +#define FE_AG_REG_GC1_AGC_DAT__A 0xC20035 +#define FE_AG_REG_GC1_AGC_DAT__M 0x3FF +#define FE_AG_REG_PM2_AGC_WRI__A 0xC20036 +#define FE_AG_REG_IND_WIN__A 0xC2003C +#define FE_AG_REG_IND_THD_LOL__A 0xC2003D +#define FE_AG_REG_IND_THD_HIL__A 0xC2003E +#define FE_AG_REG_IND_DEL__A 0xC2003F +#define FE_AG_REG_IND_PD1_WRI__A 0xC20040 +#define FE_AG_REG_PDA_AUR_CNT__A 0xC20041 +#define FE_AG_REG_PDA_RUR_CNT__A 0xC20042 +#define FE_AG_REG_PDA_AVE_DAT__A 0xC20043 +#define FE_AG_REG_PDC_RUR_CNT__A 0xC20044 +#define FE_AG_REG_PDC_SET_LVL__A 0xC20045 +#define FE_AG_REG_PDC_FLA_RGN__A 0xC20046 +#define FE_AG_REG_PDC_JMP_PSN__A 0xC20047 +#define FE_AG_REG_PDC_FLA_STP__A 0xC20048 +#define FE_AG_REG_PDC_SLO_STP__A 0xC20049 +#define FE_AG_REG_PDC_PD2_WRI__A 0xC2004A +#define FE_AG_REG_PDC_MAP_DAT__A 0xC2004B +#define FE_AG_REG_PDC_MAX__A 0xC2004C +#define FE_AG_REG_TGA_AUR_CNT__A 0xC2004D +#define FE_AG_REG_TGA_RUR_CNT__A 0xC2004E +#define FE_AG_REG_TGA_AVE_DAT__A 0xC2004F +#define FE_AG_REG_TGC_RUR_CNT__A 0xC20050 +#define FE_AG_REG_TGC_SET_LVL__A 0xC20051 +#define FE_AG_REG_TGC_SET_LVL__M 0x3F +#define FE_AG_REG_TGC_FLA_RGN__A 0xC20052 +#define FE_AG_REG_TGC_JMP_PSN__A 0xC20053 +#define FE_AG_REG_TGC_FLA_STP__A 0xC20054 +#define FE_AG_REG_TGC_SLO_STP__A 0xC20055 +#define FE_AG_REG_TGC_MAP_DAT__A 0xC20056 +#define FE_AG_REG_FGA_AUR_CNT__A 0xC20057 +#define FE_AG_REG_FGA_RUR_CNT__A 0xC20058 +#define FE_AG_REG_FGM_WRI__A 0xC20061 +#define FE_AG_REG_BGC_FGC_WRI__A 0xC20068 +#define FE_AG_REG_BGC_CGC_WRI__A 0xC20069 +#define FE_FS_REG_COMM_EXEC__A 0xC30000 +#define FE_FS_REG_ADD_INC_LOP__A 0xC30010 +#define FE_FD_REG_COMM_EXEC__A 0xC40000 +#define FE_FD_REG_SCL__A 0xC40010 +#define FE_FD_REG_MAX_LEV__A 0xC40011 +#define FE_FD_REG_NR__A 0xC40012 +#define FE_FD_REG_MEAS_VAL__A 0xC40014 +#define FE_IF_REG_COMM_EXEC__A 0xC50000 +#define FE_IF_REG_INCR0__A 0xC50010 +#define FE_IF_REG_INCR0__W 16 +#define FE_IF_REG_INCR0__M 0xFFFF +#define FE_IF_REG_INCR1__A 0xC50011 +#define FE_IF_REG_INCR1__M 0xFF +#define FE_CF_REG_COMM_EXEC__A 0xC60000 +#define FE_CF_REG_SCL__A 0xC60010 +#define FE_CF_REG_MAX_LEV__A 0xC60011 +#define FE_CF_REG_NR__A 0xC60012 +#define FE_CF_REG_IMP_VAL__A 0xC60013 +#define FE_CF_REG_MEAS_VAL__A 0xC60014 +#define FE_CU_REG_COMM_EXEC__A 0xC70000 +#define FE_CU_REG_FRM_CNT_RST__A 0xC70011 +#define FE_CU_REG_FRM_CNT_STR__A 0xC70012 +#define FT_COMM_EXEC__A 0x1000000 +#define FT_REG_COMM_EXEC__A 0x1010000 +#define CP_COMM_EXEC__A 0x1400000 +#define CP_REG_COMM_EXEC__A 0x1410000 +#define CP_REG_INTERVAL__A 0x1410011 +#define CP_REG_BR_SPL_OFFSET__A 0x1410023 +#define CP_REG_BR_STR_DEL__A 0x1410024 +#define CP_REG_RT_ANG_INC0__A 0x1410030 +#define CP_REG_RT_ANG_INC1__A 0x1410031 +#define CP_REG_RT_DETECT_ENA__A 0x1410032 +#define CP_REG_RT_DETECT_TRH__A 0x1410033 +#define CP_REG_RT_EXP_MARG__A 0x141003E +#define CP_REG_AC_NEXP_OFFS__A 0x1410040 +#define CP_REG_AC_AVER_POW__A 0x1410041 +#define CP_REG_AC_MAX_POW__A 0x1410042 +#define CP_REG_AC_WEIGHT_MAN__A 0x1410043 +#define CP_REG_AC_WEIGHT_EXP__A 0x1410044 +#define CP_REG_AC_AMP_MODE__A 0x1410047 +#define CP_REG_AC_AMP_FIX__A 0x1410048 +#define CP_REG_AC_ANG_MODE__A 0x141004A +#define CE_COMM_EXEC__A 0x1800000 +#define CE_REG_COMM_EXEC__A 0x1810000 +#define CE_REG_TAPSET__A 0x1810011 +#define CE_REG_AVG_POW__A 0x1810012 +#define CE_REG_MAX_POW__A 0x1810013 +#define CE_REG_ATT__A 0x1810014 +#define CE_REG_NRED__A 0x1810015 +#define CE_REG_NE_ERR_SELECT__A 0x1810043 +#define CE_REG_NE_TD_CAL__A 0x1810044 +#define CE_REG_NE_MIXAVG__A 0x1810046 +#define CE_REG_NE_NUPD_OFS__A 0x1810047 +#define CE_REG_PE_NEXP_OFFS__A 0x1810050 +#define CE_REG_PE_TIMESHIFT__A 0x1810051 +#define CE_REG_TP_A0_TAP_NEW__A 0x1810064 +#define CE_REG_TP_A0_TAP_NEW_VALID__A 0x1810065 +#define CE_REG_TP_A0_MU_LMS_STEP__A 0x1810066 +#define CE_REG_TP_A1_TAP_NEW__A 0x1810068 +#define CE_REG_TP_A1_TAP_NEW_VALID__A 0x1810069 +#define CE_REG_TP_A1_MU_LMS_STEP__A 0x181006A +#define CE_REG_TI_NEXP_OFFS__A 0x1810070 +#define CE_REG_FI_SHT_INCR__A 0x1810090 +#define CE_REG_FI_EXP_NORM__A 0x1810091 +#define CE_REG_IR_INPUTSEL__A 0x18100A0 +#define CE_REG_IR_STARTPOS__A 0x18100A1 +#define CE_REG_IR_NEXP_THRES__A 0x18100A2 +#define CE_REG_FR_TREAL00__A 0x1820010 +#define CE_REG_FR_TIMAG00__A 0x1820011 +#define CE_REG_FR_TREAL01__A 0x1820012 +#define CE_REG_FR_TIMAG01__A 0x1820013 +#define CE_REG_FR_TREAL02__A 0x1820014 +#define CE_REG_FR_TIMAG02__A 0x1820015 +#define CE_REG_FR_TREAL03__A 0x1820016 +#define CE_REG_FR_TIMAG03__A 0x1820017 +#define CE_REG_FR_TREAL04__A 0x1820018 +#define CE_REG_FR_TIMAG04__A 0x1820019 +#define CE_REG_FR_TREAL05__A 0x182001A +#define CE_REG_FR_TIMAG05__A 0x182001B +#define CE_REG_FR_TREAL06__A 0x182001C +#define CE_REG_FR_TIMAG06__A 0x182001D +#define CE_REG_FR_TREAL07__A 0x182001E +#define CE_REG_FR_TIMAG07__A 0x182001F +#define CE_REG_FR_TREAL08__A 0x1820020 +#define CE_REG_FR_TIMAG08__A 0x1820021 +#define CE_REG_FR_TREAL09__A 0x1820022 +#define CE_REG_FR_TIMAG09__A 0x1820023 +#define CE_REG_FR_TREAL10__A 0x1820024 +#define CE_REG_FR_TIMAG10__A 0x1820025 +#define CE_REG_FR_TREAL11__A 0x1820026 +#define CE_REG_FR_TIMAG11__A 0x1820027 +#define CE_REG_FR_MID_TAP__A 0x1820028 +#define CE_REG_FR_SQS_G00__A 0x1820029 +#define CE_REG_FR_SQS_G01__A 0x182002A +#define CE_REG_FR_SQS_G02__A 0x182002B +#define CE_REG_FR_SQS_G03__A 0x182002C +#define CE_REG_FR_SQS_G04__A 0x182002D +#define CE_REG_FR_SQS_G05__A 0x182002E +#define CE_REG_FR_SQS_G06__A 0x182002F +#define CE_REG_FR_SQS_G07__A 0x1820030 +#define CE_REG_FR_SQS_G08__A 0x1820031 +#define CE_REG_FR_SQS_G09__A 0x1820032 +#define CE_REG_FR_SQS_G10__A 0x1820033 +#define CE_REG_FR_SQS_G11__A 0x1820034 +#define CE_REG_FR_SQS_G12__A 0x1820035 +#define CE_REG_FR_RIO_G00__A 0x1820036 +#define CE_REG_FR_RIO_G01__A 0x1820037 +#define CE_REG_FR_RIO_G02__A 0x1820038 +#define CE_REG_FR_RIO_G03__A 0x1820039 +#define CE_REG_FR_RIO_G04__A 0x182003A +#define CE_REG_FR_RIO_G05__A 0x182003B +#define CE_REG_FR_RIO_G06__A 0x182003C +#define CE_REG_FR_RIO_G07__A 0x182003D +#define CE_REG_FR_RIO_G08__A 0x182003E +#define CE_REG_FR_RIO_G09__A 0x182003F +#define CE_REG_FR_RIO_G10__A 0x1820040 +#define CE_REG_FR_MODE__A 0x1820041 +#define CE_REG_FR_SQS_TRH__A 0x1820042 +#define CE_REG_FR_RIO_GAIN__A 0x1820043 +#define CE_REG_FR_BYPASS__A 0x1820044 +#define CE_REG_FR_PM_SET__A 0x1820045 +#define CE_REG_FR_ERR_SH__A 0x1820046 +#define CE_REG_FR_MAN_SH__A 0x1820047 +#define CE_REG_FR_TAP_SH__A 0x1820048 +#define EQ_COMM_EXEC__A 0x1C00000 +#define EQ_REG_COMM_EXEC__A 0x1C10000 +#define EQ_REG_COMM_MB__A 0x1C10002 +#define EQ_REG_IS_GAIN_MAN__A 0x1C10015 +#define EQ_REG_IS_GAIN_EXP__A 0x1C10016 +#define EQ_REG_IS_CLIP_EXP__A 0x1C10017 +#define EQ_REG_SN_CEGAIN__A 0x1C1002A +#define EQ_REG_SN_OFFSET__A 0x1C1002B +#define EQ_REG_RC_SEL_CAR__A 0x1C10032 +#define EQ_REG_RC_SEL_CAR_INIT 0x0 +#define EQ_REG_RC_SEL_CAR_DIV_ON 0x1 +#define EQ_REG_RC_SEL_CAR_PASS_A_CC 0x0 +#define EQ_REG_RC_SEL_CAR_PASS_B_CE 0x2 +#define EQ_REG_RC_SEL_CAR_LOCAL_A_CC 0x0 +#define EQ_REG_RC_SEL_CAR_LOCAL_B_CE 0x8 +#define EQ_REG_RC_SEL_CAR_MEAS_A_CC 0x0 +#define EQ_REG_RC_SEL_CAR_MEAS_B_CE 0x20 +#define EQ_REG_OT_CONST__A 0x1C10046 +#define EQ_REG_OT_ALPHA__A 0x1C10047 +#define EQ_REG_OT_QNT_THRES0__A 0x1C10048 +#define EQ_REG_OT_QNT_THRES1__A 0x1C10049 +#define EQ_REG_OT_CSI_STEP__A 0x1C1004A +#define EQ_REG_OT_CSI_OFFSET__A 0x1C1004B +#define EQ_REG_TD_REQ_SMB_CNT__A 0x1C10061 +#define EQ_REG_TD_TPS_PWR_OFS__A 0x1C10062 +#define EC_SB_REG_COMM_EXEC__A 0x2010000 +#define EC_SB_REG_TR_MODE__A 0x2010010 +#define EC_SB_REG_TR_MODE_8K 0x0 +#define EC_SB_REG_TR_MODE_2K 0x1 +#define EC_SB_REG_CONST__A 0x2010011 +#define EC_SB_REG_CONST_QPSK 0x0 +#define EC_SB_REG_CONST_16QAM 0x1 +#define EC_SB_REG_CONST_64QAM 0x2 +#define EC_SB_REG_ALPHA__A 0x2010012 +#define EC_SB_REG_PRIOR__A 0x2010013 +#define EC_SB_REG_PRIOR_HI 0x0 +#define EC_SB_REG_PRIOR_LO 0x1 +#define EC_SB_REG_CSI_HI__A 0x2010014 +#define EC_SB_REG_CSI_LO__A 0x2010015 +#define EC_SB_REG_SMB_TGL__A 0x2010016 +#define EC_SB_REG_SNR_HI__A 0x2010017 +#define EC_SB_REG_SNR_MID__A 0x2010018 +#define EC_SB_REG_SNR_LO__A 0x2010019 +#define EC_SB_REG_SCALE_MSB__A 0x201001A +#define EC_SB_REG_SCALE_BIT2__A 0x201001B +#define EC_SB_REG_SCALE_LSB__A 0x201001C +#define EC_SB_REG_CSI_OFS__A 0x201001D +#define EC_VD_REG_COMM_EXEC__A 0x2090000 +#define EC_VD_REG_FORCE__A 0x2090010 +#define EC_VD_REG_SET_CODERATE__A 0x2090011 +#define EC_VD_REG_SET_CODERATE_C1_2 0x0 +#define EC_VD_REG_SET_CODERATE_C2_3 0x1 +#define EC_VD_REG_SET_CODERATE_C3_4 0x2 +#define EC_VD_REG_SET_CODERATE_C5_6 0x3 +#define EC_VD_REG_SET_CODERATE_C7_8 0x4 +#define EC_VD_REG_REQ_SMB_CNT__A 0x2090012 +#define EC_VD_REG_RLK_ENA__A 0x2090014 +#define EC_OD_REG_COMM_EXEC__A 0x2110000 +#define EC_OD_REG_SYNC__A 0x2110010 +#define EC_OD_DEINT_RAM__A 0x2120000 +#define EC_RS_REG_COMM_EXEC__A 0x2130000 +#define EC_RS_REG_REQ_PCK_CNT__A 0x2130010 +#define EC_RS_REG_VAL__A 0x2130011 +#define EC_RS_REG_VAL_PCK 0x1 +#define EC_RS_EC_RAM__A 0x2140000 +#define EC_OC_REG_COMM_EXEC__A 0x2150000 +#define EC_OC_REG_COMM_EXEC_CTL_ACTIVE 0x1 +#define EC_OC_REG_COMM_EXEC_CTL_HOLD 0x2 +#define EC_OC_REG_COMM_INT_STA__A 0x2150007 +#define EC_OC_REG_OC_MODE_LOP__A 0x2150010 +#define EC_OC_REG_OC_MODE_LOP_PAR_ENA__M 0x1 +#define EC_OC_REG_OC_MODE_LOP_PAR_ENA_ENABLE 0x0 +#define EC_OC_REG_OC_MODE_LOP_PAR_ENA_DISABLE 0x1 +#define EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC__M 0x4 +#define EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC_STATIC 0x0 +#define EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE__M 0x80 +#define EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE_SERIAL 0x80 +#define EC_OC_REG_OC_MODE_HIP__A 0x2150011 +#define EC_OC_REG_OC_MODE_HIP_MPG_BUS_SRC_MONITOR 0x10 +#define EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL__M 0x200 +#define EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_DISABLE 0x0 +#define EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_ENABLE 0x200 +#define EC_OC_REG_OC_MPG_SIO__A 0x2150012 +#define EC_OC_REG_OC_MPG_SIO__M 0xFFF +#define EC_OC_REG_OC_MON_SIO__A 0x2150013 +#define EC_OC_REG_DTO_INC_LOP__A 0x2150014 +#define EC_OC_REG_DTO_INC_HIP__A 0x2150015 +#define EC_OC_REG_SNC_ISC_LVL__A 0x2150016 +#define EC_OC_REG_SNC_ISC_LVL_OSC__M 0xF0 +#define EC_OC_REG_TMD_TOP_MODE__A 0x215001D +#define EC_OC_REG_TMD_TOP_CNT__A 0x215001E +#define EC_OC_REG_TMD_HIL_MAR__A 0x215001F +#define EC_OC_REG_TMD_LOL_MAR__A 0x2150020 +#define EC_OC_REG_TMD_CUR_CNT__A 0x2150021 +#define EC_OC_REG_AVR_ASH_CNT__A 0x2150023 +#define EC_OC_REG_AVR_BSH_CNT__A 0x2150024 +#define EC_OC_REG_RCN_MODE__A 0x2150027 +#define EC_OC_REG_RCN_CRA_LOP__A 0x2150028 +#define EC_OC_REG_RCN_CRA_HIP__A 0x2150029 +#define EC_OC_REG_RCN_CST_LOP__A 0x215002A +#define EC_OC_REG_RCN_CST_HIP__A 0x215002B +#define EC_OC_REG_RCN_SET_LVL__A 0x215002C +#define EC_OC_REG_RCN_GAI_LVL__A 0x215002D +#define EC_OC_REG_RCN_CLP_LOP__A 0x2150032 +#define EC_OC_REG_RCN_CLP_HIP__A 0x2150033 +#define EC_OC_REG_RCN_MAP_LOP__A 0x2150034 +#define EC_OC_REG_RCN_MAP_HIP__A 0x2150035 +#define EC_OC_REG_OCR_MPG_UOS__A 0x2150036 +#define EC_OC_REG_OCR_MPG_UOS__M 0xFFF +#define EC_OC_REG_OCR_MPG_UOS_INIT 0x0 +#define EC_OC_REG_OCR_MPG_USR_DAT__A 0x2150038 +#define EC_OC_REG_OCR_MON_UOS__A 0x2150039 +#define EC_OC_REG_OCR_MON_UOS_DAT_0_ENABLE 0x1 +#define EC_OC_REG_OCR_MON_UOS_DAT_1_ENABLE 0x2 +#define EC_OC_REG_OCR_MON_UOS_DAT_2_ENABLE 0x4 +#define EC_OC_REG_OCR_MON_UOS_DAT_3_ENABLE 0x8 +#define EC_OC_REG_OCR_MON_UOS_DAT_4_ENABLE 0x10 +#define EC_OC_REG_OCR_MON_UOS_DAT_5_ENABLE 0x20 +#define EC_OC_REG_OCR_MON_UOS_DAT_6_ENABLE 0x40 +#define EC_OC_REG_OCR_MON_UOS_DAT_7_ENABLE 0x80 +#define EC_OC_REG_OCR_MON_UOS_DAT_8_ENABLE 0x100 +#define EC_OC_REG_OCR_MON_UOS_DAT_9_ENABLE 0x200 +#define EC_OC_REG_OCR_MON_UOS_VAL_ENABLE 0x400 +#define EC_OC_REG_OCR_MON_UOS_CLK_ENABLE 0x800 +#define EC_OC_REG_OCR_MON_WRI__A 0x215003A +#define EC_OC_REG_OCR_MON_WRI_INIT 0x0 +#define EC_OC_REG_IPR_INV_MPG__A 0x2150045 +#define CC_REG_OSC_MODE__A 0x2410010 +#define CC_REG_OSC_MODE_M20 0x1 +#define CC_REG_PLL_MODE__A 0x2410011 +#define CC_REG_PLL_MODE_BYPASS_PLL 0x1 +#define CC_REG_PLL_MODE_PUMP_CUR_12 0x14 +#define CC_REG_REF_DIVIDE__A 0x2410012 +#define CC_REG_PWD_MODE__A 0x2410015 +#define CC_REG_PWD_MODE_DOWN_PLL 0x2 +#define CC_REG_UPDATE__A 0x2410017 +#define CC_REG_UPDATE_KEY 0x3973 +#define CC_REG_JTAGID_L__A 0x2410019 +#define LC_COMM_EXEC__A 0x2800000 +#define LC_RA_RAM_IFINCR_NOM_L__A 0x282000C +#define LC_RA_RAM_FILTER_SYM_SET__A 0x282001A +#define LC_RA_RAM_FILTER_SYM_SET__PRE 0x3E8 +#define LC_RA_RAM_FILTER_CRMM_A__A 0x2820060 +#define LC_RA_RAM_FILTER_CRMM_A__PRE 0x4 +#define LC_RA_RAM_FILTER_CRMM_B__A 0x2820061 +#define LC_RA_RAM_FILTER_CRMM_B__PRE 0x1 +#define LC_RA_RAM_FILTER_SRMM_A__A 0x2820068 +#define LC_RA_RAM_FILTER_SRMM_A__PRE 0x4 +#define LC_RA_RAM_FILTER_SRMM_B__A 0x2820069 +#define LC_RA_RAM_FILTER_SRMM_B__PRE 0x1 +#define B_HI_COMM_EXEC__A 0x400000 +#define B_HI_COMM_MB__A 0x400002 +#define B_HI_CT_REG_COMM_STATE__A 0x410001 +#define B_HI_RA_RAM_SRV_RES__A 0x420031 +#define B_HI_RA_RAM_SRV_CMD__A 0x420032 +#define B_HI_RA_RAM_SRV_CMD_RESET 0x2 +#define B_HI_RA_RAM_SRV_CMD_CONFIG 0x3 +#define B_HI_RA_RAM_SRV_CMD_EXECUTE 0x6 +#define B_HI_RA_RAM_SRV_RST_KEY__A 0x420033 +#define B_HI_RA_RAM_SRV_RST_KEY_ACT 0x3973 +#define B_HI_RA_RAM_SRV_CFG_KEY__A 0x420033 +#define B_HI_RA_RAM_SRV_CFG_DIV__A 0x420034 +#define B_HI_RA_RAM_SRV_CFG_BDL__A 0x420035 +#define B_HI_RA_RAM_SRV_CFG_WUP__A 0x420036 +#define B_HI_RA_RAM_SRV_CFG_ACT__A 0x420037 +#define B_HI_RA_RAM_SRV_CFG_ACT_SLV0_ON 0x1 +#define B_HI_RA_RAM_SRV_CFG_ACT_BRD__M 0x4 +#define B_HI_RA_RAM_SRV_CFG_ACT_BRD_OFF 0x0 +#define B_HI_RA_RAM_SRV_CFG_ACT_BRD_ON 0x4 +#define B_HI_RA_RAM_SRV_CFG_ACT_PWD_EXE 0x8 +#define B_HI_RA_RAM_USR_BEGIN__A 0x420040 +#define B_HI_IF_RAM_TRP_BPT0__AX 0x430000 +#define B_HI_IF_RAM_USR_BEGIN__A 0x430200 +#define B_SC_COMM_EXEC__A 0x800000 +#define B_SC_COMM_EXEC_CTL_STOP 0x0 +#define B_SC_COMM_STATE__A 0x800001 +#define B_SC_RA_RAM_PARAM0__A 0x820040 +#define B_SC_RA_RAM_PARAM1__A 0x820041 +#define B_SC_RA_RAM_CMD_ADDR__A 0x820042 +#define B_SC_RA_RAM_CMD__A 0x820043 +#define B_SC_RA_RAM_CMD_PROC_START 0x1 +#define B_SC_RA_RAM_CMD_SET_PREF_PARAM 0x3 +#define B_SC_RA_RAM_CMD_GET_OP_PARAM 0x5 +#define B_SC_RA_RAM_SW_EVENT_RUN_NMASK__M 0x1 +#define B_SC_RA_RAM_LOCKTRACK_MIN 0x1 +#define B_SC_RA_RAM_OP_PARAM_MODE_2K 0x0 +#define B_SC_RA_RAM_OP_PARAM_MODE_8K 0x1 +#define B_SC_RA_RAM_OP_PARAM_GUARD_32 0x0 +#define B_SC_RA_RAM_OP_PARAM_GUARD_16 0x4 +#define B_SC_RA_RAM_OP_PARAM_GUARD_8 0x8 +#define B_SC_RA_RAM_OP_PARAM_GUARD_4 0xC +#define B_SC_RA_RAM_OP_PARAM_CONST_QPSK 0x0 +#define B_SC_RA_RAM_OP_PARAM_CONST_QAM16 0x10 +#define B_SC_RA_RAM_OP_PARAM_CONST_QAM64 0x20 +#define B_SC_RA_RAM_OP_PARAM_HIER_NO 0x0 +#define B_SC_RA_RAM_OP_PARAM_HIER_A1 0x40 +#define B_SC_RA_RAM_OP_PARAM_HIER_A2 0x80 +#define B_SC_RA_RAM_OP_PARAM_HIER_A4 0xC0 +#define B_SC_RA_RAM_OP_PARAM_RATE_1_2 0x0 +#define B_SC_RA_RAM_OP_PARAM_RATE_2_3 0x200 +#define B_SC_RA_RAM_OP_PARAM_RATE_3_4 0x400 +#define B_SC_RA_RAM_OP_PARAM_RATE_5_6 0x600 +#define B_SC_RA_RAM_OP_PARAM_RATE_7_8 0x800 +#define B_SC_RA_RAM_OP_PARAM_PRIO_HI 0x0 +#define B_SC_RA_RAM_OP_PARAM_PRIO_LO 0x1000 +#define B_SC_RA_RAM_OP_AUTO_MODE__M 0x1 +#define B_SC_RA_RAM_OP_AUTO_GUARD__M 0x2 +#define B_SC_RA_RAM_OP_AUTO_CONST__M 0x4 +#define B_SC_RA_RAM_OP_AUTO_HIER__M 0x8 +#define B_SC_RA_RAM_OP_AUTO_RATE__M 0x10 +#define B_SC_RA_RAM_LOCK__A 0x82004B +#define B_SC_RA_RAM_LOCK_DEMOD__M 0x1 +#define B_SC_RA_RAM_LOCK_FEC__M 0x2 +#define B_SC_RA_RAM_LOCK_MPEG__M 0x4 +#define B_SC_RA_RAM_BE_OPT_ENA__A 0x82004C +#define B_SC_RA_RAM_BE_OPT_ENA_CP_OPT 0x1 +#define B_SC_RA_RAM_BE_OPT_DELAY__A 0x82004D +#define B_SC_RA_RAM_CONFIG__A 0x820050 +#define B_SC_RA_RAM_CONFIG_FR_ENABLE__M 0x4 +#define B_SC_RA_RAM_CONFIG_FREQSCAN__M 0x10 +#define B_SC_RA_RAM_CONFIG_SLAVE__M 0x20 +#define B_SC_RA_RAM_CONFIG_DIV_BLANK_ENABLE__M 0x200 +#define B_SC_RA_RAM_CONFIG_DIV_ECHO_ENABLE__M 0x400 +#define B_SC_RA_RAM_CO_TD_CAL_2K__A 0x82005D +#define B_SC_RA_RAM_CO_TD_CAL_8K__A 0x82005E +#define B_SC_RA_RAM_IF_SAVE__AX 0x82008E +#define B_SC_RA_RAM_DIVERSITY_DELAY_2K_32__A 0x820098 +#define B_SC_RA_RAM_DIVERSITY_DELAY_2K_16__A 0x820099 +#define B_SC_RA_RAM_DIVERSITY_DELAY_2K_8__A 0x82009A +#define B_SC_RA_RAM_DIVERSITY_DELAY_2K_4__A 0x82009B +#define B_SC_RA_RAM_DIVERSITY_DELAY_8K_32__A 0x82009C +#define B_SC_RA_RAM_DIVERSITY_DELAY_8K_16__A 0x82009D +#define B_SC_RA_RAM_DIVERSITY_DELAY_8K_8__A 0x82009E +#define B_SC_RA_RAM_DIVERSITY_DELAY_8K_4__A 0x82009F +#define B_SC_RA_RAM_IR_COARSE_2K_LENGTH__A 0x8200D1 +#define B_SC_RA_RAM_IR_COARSE_2K_LENGTH__PRE 0x9 +#define B_SC_RA_RAM_IR_COARSE_2K_FREQINC__A 0x8200D2 +#define B_SC_RA_RAM_IR_COARSE_2K_FREQINC__PRE 0x4 +#define B_SC_RA_RAM_IR_COARSE_2K_KAISINC__A 0x8200D3 +#define B_SC_RA_RAM_IR_COARSE_2K_KAISINC__PRE 0x100 +#define B_SC_RA_RAM_IR_COARSE_8K_LENGTH__A 0x8200D4 +#define B_SC_RA_RAM_IR_COARSE_8K_LENGTH__PRE 0x8 +#define B_SC_RA_RAM_IR_COARSE_8K_FREQINC__A 0x8200D5 +#define B_SC_RA_RAM_IR_COARSE_8K_FREQINC__PRE 0x8 +#define B_SC_RA_RAM_IR_COARSE_8K_KAISINC__A 0x8200D6 +#define B_SC_RA_RAM_IR_COARSE_8K_KAISINC__PRE 0x200 +#define B_SC_RA_RAM_IR_FINE_2K_LENGTH__A 0x8200D7 +#define B_SC_RA_RAM_IR_FINE_2K_LENGTH__PRE 0x9 +#define B_SC_RA_RAM_IR_FINE_2K_FREQINC__A 0x8200D8 +#define B_SC_RA_RAM_IR_FINE_2K_FREQINC__PRE 0x4 +#define B_SC_RA_RAM_IR_FINE_2K_KAISINC__A 0x8200D9 +#define B_SC_RA_RAM_IR_FINE_2K_KAISINC__PRE 0x100 +#define B_SC_RA_RAM_IR_FINE_8K_LENGTH__A 0x8200DA +#define B_SC_RA_RAM_IR_FINE_8K_LENGTH__PRE 0xB +#define B_SC_RA_RAM_IR_FINE_8K_FREQINC__A 0x8200DB +#define B_SC_RA_RAM_IR_FINE_8K_FREQINC__PRE 0x1 +#define B_SC_RA_RAM_IR_FINE_8K_KAISINC__A 0x8200DC +#define B_SC_RA_RAM_IR_FINE_8K_KAISINC__PRE 0x40 +#define B_SC_RA_RAM_ECHO_SHIFT_LIM__A 0x8200DD +#define B_SC_RA_RAM_SAMPLE_RATE_COUNT__A 0x8200E8 +#define B_SC_RA_RAM_SAMPLE_RATE_STEP__A 0x8200E9 +#define B_SC_RA_RAM_BAND__A 0x8200EC +#define B_SC_RA_RAM_LC_ABS_2K__A 0x8200F4 +#define B_SC_RA_RAM_LC_ABS_2K__PRE 0x1F +#define B_SC_RA_RAM_LC_ABS_8K__A 0x8200F5 +#define B_SC_RA_RAM_LC_ABS_8K__PRE 0x1F +#define B_SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE 0x100 +#define B_SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE 0x4 +#define B_SC_RA_RAM_EQ_IS_GAIN_QPSK_MAN__PRE 0x1E2 +#define B_SC_RA_RAM_EQ_IS_GAIN_QPSK_EXP__PRE 0x4 +#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_MAN__PRE 0x10D +#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_EXP__PRE 0x5 +#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_MAN__PRE 0x17D +#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_EXP__PRE 0x4 +#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_MAN__PRE 0x133 +#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_EXP__PRE 0x5 +#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_MAN__PRE 0x114 +#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_EXP__PRE 0x5 +#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_MAN__PRE 0x14A +#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_EXP__PRE 0x4 +#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_MAN__PRE 0x1BB +#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_EXP__PRE 0x4 +#define B_SC_RA_RAM_DRIVER_VERSION__AX 0x8201FE +#define B_SC_RA_RAM_PROC_LOCKTRACK 0x0 +#define B_FE_COMM_EXEC__A 0xC00000 +#define B_FE_AD_REG_COMM_EXEC__A 0xC10000 +#define B_FE_AD_REG_FDB_IN__A 0xC10012 +#define B_FE_AD_REG_PD__A 0xC10013 +#define B_FE_AD_REG_INVEXT__A 0xC10014 +#define B_FE_AD_REG_CLKNEG__A 0xC10015 +#define B_FE_AG_REG_COMM_EXEC__A 0xC20000 +#define B_FE_AG_REG_AG_MODE_LOP__A 0xC20010 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_4__M 0x10 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_4_STATIC 0x0 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_4_DYNAMIC 0x10 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_5__M 0x20 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC 0x0 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_C__M 0x1000 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_C_STATIC 0x0 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_C_DYNAMIC 0x1000 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_E__M 0x4000 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_E_STATIC 0x0 +#define B_FE_AG_REG_AG_MODE_LOP_MODE_E_DYNAMIC 0x4000 +#define B_FE_AG_REG_AG_MODE_HIP__A 0xC20011 +#define B_FE_AG_REG_AG_MODE_HIP_MODE_J__M 0x8 +#define B_FE_AG_REG_AG_MODE_HIP_MODE_J_STATIC 0x0 +#define B_FE_AG_REG_AG_MODE_HIP_MODE_J_DYNAMIC 0x8 +#define B_FE_AG_REG_AG_PGA_MODE__A 0xC20012 +#define B_FE_AG_REG_AG_PGA_MODE_PFY_PCY_AFY_REN 0x0 +#define B_FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN 0x1 +#define B_FE_AG_REG_AG_AGC_SIO__A 0xC20013 +#define B_FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M 0x2 +#define B_FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_OUTPUT 0x0 +#define B_FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_INPUT 0x2 +#define B_FE_AG_REG_AG_PWD__A 0xC20015 +#define B_FE_AG_REG_AG_PWD_PWD_PD2__M 0x2 +#define B_FE_AG_REG_AG_PWD_PWD_PD2_DISABLE 0x0 +#define B_FE_AG_REG_AG_PWD_PWD_PD2_ENABLE 0x2 +#define B_FE_AG_REG_DCE_AUR_CNT__A 0xC20016 +#define B_FE_AG_REG_DCE_RUR_CNT__A 0xC20017 +#define B_FE_AG_REG_ACE_AUR_CNT__A 0xC2001A +#define B_FE_AG_REG_ACE_RUR_CNT__A 0xC2001B +#define B_FE_AG_REG_CDR_RUR_CNT__A 0xC20020 +#define B_FE_AG_REG_EGC_RUR_CNT__A 0xC20024 +#define B_FE_AG_REG_EGC_SET_LVL__A 0xC20025 +#define B_FE_AG_REG_EGC_SET_LVL__M 0x1FF +#define B_FE_AG_REG_EGC_FLA_RGN__A 0xC20026 +#define B_FE_AG_REG_EGC_SLO_RGN__A 0xC20027 +#define B_FE_AG_REG_EGC_JMP_PSN__A 0xC20028 +#define B_FE_AG_REG_EGC_FLA_INC__A 0xC20029 +#define B_FE_AG_REG_EGC_FLA_DEC__A 0xC2002A +#define B_FE_AG_REG_EGC_SLO_INC__A 0xC2002B +#define B_FE_AG_REG_EGC_SLO_DEC__A 0xC2002C +#define B_FE_AG_REG_EGC_FAS_INC__A 0xC2002D +#define B_FE_AG_REG_EGC_FAS_DEC__A 0xC2002E +#define B_FE_AG_REG_PM1_AGC_WRI__A 0xC20030 +#define B_FE_AG_REG_PM1_AGC_WRI__M 0x7FF +#define B_FE_AG_REG_GC1_AGC_RIC__A 0xC20031 +#define B_FE_AG_REG_GC1_AGC_OFF__A 0xC20032 +#define B_FE_AG_REG_GC1_AGC_MAX__A 0xC20033 +#define B_FE_AG_REG_GC1_AGC_MIN__A 0xC20034 +#define B_FE_AG_REG_GC1_AGC_DAT__A 0xC20035 +#define B_FE_AG_REG_GC1_AGC_DAT__M 0x3FF +#define B_FE_AG_REG_PM2_AGC_WRI__A 0xC20036 +#define B_FE_AG_REG_IND_WIN__A 0xC2003C +#define B_FE_AG_REG_IND_THD_LOL__A 0xC2003D +#define B_FE_AG_REG_IND_THD_HIL__A 0xC2003E +#define B_FE_AG_REG_IND_DEL__A 0xC2003F +#define B_FE_AG_REG_IND_PD1_WRI__A 0xC20040 +#define B_FE_AG_REG_PDA_AUR_CNT__A 0xC20041 +#define B_FE_AG_REG_PDA_RUR_CNT__A 0xC20042 +#define B_FE_AG_REG_PDA_AVE_DAT__A 0xC20043 +#define B_FE_AG_REG_PDC_RUR_CNT__A 0xC20044 +#define B_FE_AG_REG_PDC_SET_LVL__A 0xC20045 +#define B_FE_AG_REG_PDC_FLA_RGN__A 0xC20046 +#define B_FE_AG_REG_PDC_JMP_PSN__A 0xC20047 +#define B_FE_AG_REG_PDC_FLA_STP__A 0xC20048 +#define B_FE_AG_REG_PDC_SLO_STP__A 0xC20049 +#define B_FE_AG_REG_PDC_PD2_WRI__A 0xC2004A +#define B_FE_AG_REG_PDC_MAP_DAT__A 0xC2004B +#define B_FE_AG_REG_PDC_MAX__A 0xC2004C +#define B_FE_AG_REG_TGA_AUR_CNT__A 0xC2004D +#define B_FE_AG_REG_TGA_RUR_CNT__A 0xC2004E +#define B_FE_AG_REG_TGA_AVE_DAT__A 0xC2004F +#define B_FE_AG_REG_TGC_RUR_CNT__A 0xC20050 +#define B_FE_AG_REG_TGC_SET_LVL__A 0xC20051 +#define B_FE_AG_REG_TGC_SET_LVL__M 0x3F +#define B_FE_AG_REG_TGC_FLA_RGN__A 0xC20052 +#define B_FE_AG_REG_TGC_JMP_PSN__A 0xC20053 +#define B_FE_AG_REG_TGC_FLA_STP__A 0xC20054 +#define B_FE_AG_REG_TGC_SLO_STP__A 0xC20055 +#define B_FE_AG_REG_TGC_MAP_DAT__A 0xC20056 +#define B_FE_AG_REG_FGM_WRI__A 0xC20061 +#define B_FE_AG_REG_BGC_FGC_WRI__A 0xC20068 +#define B_FE_AG_REG_BGC_CGC_WRI__A 0xC20069 +#define B_FE_FS_REG_COMM_EXEC__A 0xC30000 +#define B_FE_FS_REG_ADD_INC_LOP__A 0xC30010 +#define B_FE_FD_REG_COMM_EXEC__A 0xC40000 +#define B_FE_FD_REG_SCL__A 0xC40010 +#define B_FE_FD_REG_MAX_LEV__A 0xC40011 +#define B_FE_FD_REG_NR__A 0xC40012 +#define B_FE_FD_REG_MEAS_VAL__A 0xC40014 +#define B_FE_IF_REG_COMM_EXEC__A 0xC50000 +#define B_FE_IF_REG_INCR0__A 0xC50010 +#define B_FE_IF_REG_INCR0__W 16 +#define B_FE_IF_REG_INCR0__M 0xFFFF +#define B_FE_IF_REG_INCR1__A 0xC50011 +#define B_FE_IF_REG_INCR1__M 0xFF +#define B_FE_CF_REG_COMM_EXEC__A 0xC60000 +#define B_FE_CF_REG_SCL__A 0xC60010 +#define B_FE_CF_REG_MAX_LEV__A 0xC60011 +#define B_FE_CF_REG_NR__A 0xC60012 +#define B_FE_CF_REG_IMP_VAL__A 0xC60013 +#define B_FE_CF_REG_MEAS_VAL__A 0xC60014 +#define B_FE_CU_REG_COMM_EXEC__A 0xC70000 +#define B_FE_CU_REG_FRM_CNT_RST__A 0xC70011 +#define B_FE_CU_REG_FRM_CNT_STR__A 0xC70012 +#define B_FE_CU_REG_CTR_NFC_ICR__A 0xC70020 +#define B_FE_CU_REG_CTR_NFC_OCR__A 0xC70021 +#define B_FE_CU_REG_DIV_NFC_CLP__A 0xC70027 +#define B_FT_COMM_EXEC__A 0x1000000 +#define B_FT_REG_COMM_EXEC__A 0x1010000 +#define B_CP_COMM_EXEC__A 0x1400000 +#define B_CP_REG_COMM_EXEC__A 0x1410000 +#define B_CP_REG_INTERVAL__A 0x1410011 +#define B_CP_REG_BR_SPL_OFFSET__A 0x1410023 +#define B_CP_REG_BR_STR_DEL__A 0x1410024 +#define B_CP_REG_RT_ANG_INC0__A 0x1410030 +#define B_CP_REG_RT_ANG_INC1__A 0x1410031 +#define B_CP_REG_RT_DETECT_TRH__A 0x1410033 +#define B_CP_REG_AC_NEXP_OFFS__A 0x1410040 +#define B_CP_REG_AC_AVER_POW__A 0x1410041 +#define B_CP_REG_AC_MAX_POW__A 0x1410042 +#define B_CP_REG_AC_WEIGHT_MAN__A 0x1410043 +#define B_CP_REG_AC_WEIGHT_EXP__A 0x1410044 +#define B_CP_REG_AC_AMP_MODE__A 0x1410047 +#define B_CP_REG_AC_AMP_FIX__A 0x1410048 +#define B_CP_REG_AC_ANG_MODE__A 0x141004A +#define B_CE_COMM_EXEC__A 0x1800000 +#define B_CE_REG_COMM_EXEC__A 0x1810000 +#define B_CE_REG_TAPSET__A 0x1810011 +#define B_CE_REG_AVG_POW__A 0x1810012 +#define B_CE_REG_MAX_POW__A 0x1810013 +#define B_CE_REG_ATT__A 0x1810014 +#define B_CE_REG_NRED__A 0x1810015 +#define B_CE_REG_NE_ERR_SELECT__A 0x1810043 +#define B_CE_REG_NE_TD_CAL__A 0x1810044 +#define B_CE_REG_NE_MIXAVG__A 0x1810046 +#define B_CE_REG_NE_NUPD_OFS__A 0x1810047 +#define B_CE_REG_PE_NEXP_OFFS__A 0x1810050 +#define B_CE_REG_PE_TIMESHIFT__A 0x1810051 +#define B_CE_REG_TP_A0_TAP_NEW__A 0x1810064 +#define B_CE_REG_TP_A0_TAP_NEW_VALID__A 0x1810065 +#define B_CE_REG_TP_A0_MU_LMS_STEP__A 0x1810066 +#define B_CE_REG_TP_A1_TAP_NEW__A 0x1810068 +#define B_CE_REG_TP_A1_TAP_NEW_VALID__A 0x1810069 +#define B_CE_REG_TP_A1_MU_LMS_STEP__A 0x181006A +#define B_CE_REG_TI_PHN_ENABLE__A 0x1810073 +#define B_CE_REG_FI_SHT_INCR__A 0x1810090 +#define B_CE_REG_FI_EXP_NORM__A 0x1810091 +#define B_CE_REG_IR_INPUTSEL__A 0x18100A0 +#define B_CE_REG_IR_STARTPOS__A 0x18100A1 +#define B_CE_REG_IR_NEXP_THRES__A 0x18100A2 +#define B_CE_REG_FR_TREAL00__A 0x1820010 +#define B_CE_REG_FR_TIMAG00__A 0x1820011 +#define B_CE_REG_FR_TREAL01__A 0x1820012 +#define B_CE_REG_FR_TIMAG01__A 0x1820013 +#define B_CE_REG_FR_TREAL02__A 0x1820014 +#define B_CE_REG_FR_TIMAG02__A 0x1820015 +#define B_CE_REG_FR_TREAL03__A 0x1820016 +#define B_CE_REG_FR_TIMAG03__A 0x1820017 +#define B_CE_REG_FR_TREAL04__A 0x1820018 +#define B_CE_REG_FR_TIMAG04__A 0x1820019 +#define B_CE_REG_FR_TREAL05__A 0x182001A +#define B_CE_REG_FR_TIMAG05__A 0x182001B +#define B_CE_REG_FR_TREAL06__A 0x182001C +#define B_CE_REG_FR_TIMAG06__A 0x182001D +#define B_CE_REG_FR_TREAL07__A 0x182001E +#define B_CE_REG_FR_TIMAG07__A 0x182001F +#define B_CE_REG_FR_TREAL08__A 0x1820020 +#define B_CE_REG_FR_TIMAG08__A 0x1820021 +#define B_CE_REG_FR_TREAL09__A 0x1820022 +#define B_CE_REG_FR_TIMAG09__A 0x1820023 +#define B_CE_REG_FR_TREAL10__A 0x1820024 +#define B_CE_REG_FR_TIMAG10__A 0x1820025 +#define B_CE_REG_FR_TREAL11__A 0x1820026 +#define B_CE_REG_FR_TIMAG11__A 0x1820027 +#define B_CE_REG_FR_MID_TAP__A 0x1820028 +#define B_CE_REG_FR_SQS_G00__A 0x1820029 +#define B_CE_REG_FR_SQS_G01__A 0x182002A +#define B_CE_REG_FR_SQS_G02__A 0x182002B +#define B_CE_REG_FR_SQS_G03__A 0x182002C +#define B_CE_REG_FR_SQS_G04__A 0x182002D +#define B_CE_REG_FR_SQS_G05__A 0x182002E +#define B_CE_REG_FR_SQS_G06__A 0x182002F +#define B_CE_REG_FR_SQS_G07__A 0x1820030 +#define B_CE_REG_FR_SQS_G08__A 0x1820031 +#define B_CE_REG_FR_SQS_G09__A 0x1820032 +#define B_CE_REG_FR_SQS_G10__A 0x1820033 +#define B_CE_REG_FR_SQS_G11__A 0x1820034 +#define B_CE_REG_FR_SQS_G12__A 0x1820035 +#define B_CE_REG_FR_RIO_G00__A 0x1820036 +#define B_CE_REG_FR_RIO_G01__A 0x1820037 +#define B_CE_REG_FR_RIO_G02__A 0x1820038 +#define B_CE_REG_FR_RIO_G03__A 0x1820039 +#define B_CE_REG_FR_RIO_G04__A 0x182003A +#define B_CE_REG_FR_RIO_G05__A 0x182003B +#define B_CE_REG_FR_RIO_G06__A 0x182003C +#define B_CE_REG_FR_RIO_G07__A 0x182003D +#define B_CE_REG_FR_RIO_G08__A 0x182003E +#define B_CE_REG_FR_RIO_G09__A 0x182003F +#define B_CE_REG_FR_RIO_G10__A 0x1820040 +#define B_CE_REG_FR_MODE__A 0x1820041 +#define B_CE_REG_FR_SQS_TRH__A 0x1820042 +#define B_CE_REG_FR_RIO_GAIN__A 0x1820043 +#define B_CE_REG_FR_BYPASS__A 0x1820044 +#define B_CE_REG_FR_PM_SET__A 0x1820045 +#define B_CE_REG_FR_ERR_SH__A 0x1820046 +#define B_CE_REG_FR_MAN_SH__A 0x1820047 +#define B_CE_REG_FR_TAP_SH__A 0x1820048 +#define B_EQ_COMM_EXEC__A 0x1C00000 +#define B_EQ_REG_COMM_EXEC__A 0x1C10000 +#define B_EQ_REG_COMM_MB__A 0x1C10002 +#define B_EQ_REG_IS_GAIN_MAN__A 0x1C10015 +#define B_EQ_REG_IS_GAIN_EXP__A 0x1C10016 +#define B_EQ_REG_IS_CLIP_EXP__A 0x1C10017 +#define B_EQ_REG_SN_CEGAIN__A 0x1C1002A +#define B_EQ_REG_SN_OFFSET__A 0x1C1002B +#define B_EQ_REG_RC_SEL_CAR__A 0x1C10032 +#define B_EQ_REG_RC_SEL_CAR_INIT 0x2 +#define B_EQ_REG_RC_SEL_CAR_DIV_ON 0x1 +#define B_EQ_REG_RC_SEL_CAR_PASS_A_CC 0x0 +#define B_EQ_REG_RC_SEL_CAR_PASS_B_CE 0x2 +#define B_EQ_REG_RC_SEL_CAR_LOCAL_A_CC 0x0 +#define B_EQ_REG_RC_SEL_CAR_LOCAL_B_CE 0x8 +#define B_EQ_REG_RC_SEL_CAR_MEAS_A_CC 0x0 +#define B_EQ_REG_RC_SEL_CAR_MEAS_B_CE 0x20 +#define B_EQ_REG_RC_SEL_CAR_FFTMODE__M 0x80 +#define B_EQ_REG_OT_CONST__A 0x1C10046 +#define B_EQ_REG_OT_ALPHA__A 0x1C10047 +#define B_EQ_REG_OT_QNT_THRES0__A 0x1C10048 +#define B_EQ_REG_OT_QNT_THRES1__A 0x1C10049 +#define B_EQ_REG_OT_CSI_STEP__A 0x1C1004A +#define B_EQ_REG_OT_CSI_OFFSET__A 0x1C1004B +#define B_EQ_REG_TD_REQ_SMB_CNT__A 0x1C10061 +#define B_EQ_REG_TD_TPS_PWR_OFS__A 0x1C10062 +#define B_EC_SB_REG_COMM_EXEC__A 0x2010000 +#define B_EC_SB_REG_TR_MODE__A 0x2010010 +#define B_EC_SB_REG_TR_MODE_8K 0x0 +#define B_EC_SB_REG_TR_MODE_2K 0x1 +#define B_EC_SB_REG_CONST__A 0x2010011 +#define B_EC_SB_REG_CONST_QPSK 0x0 +#define B_EC_SB_REG_CONST_16QAM 0x1 +#define B_EC_SB_REG_CONST_64QAM 0x2 +#define B_EC_SB_REG_ALPHA__A 0x2010012 +#define B_EC_SB_REG_PRIOR__A 0x2010013 +#define B_EC_SB_REG_PRIOR_HI 0x0 +#define B_EC_SB_REG_PRIOR_LO 0x1 +#define B_EC_SB_REG_CSI_HI__A 0x2010014 +#define B_EC_SB_REG_CSI_LO__A 0x2010015 +#define B_EC_SB_REG_SMB_TGL__A 0x2010016 +#define B_EC_SB_REG_SNR_HI__A 0x2010017 +#define B_EC_SB_REG_SNR_MID__A 0x2010018 +#define B_EC_SB_REG_SNR_LO__A 0x2010019 +#define B_EC_SB_REG_SCALE_MSB__A 0x201001A +#define B_EC_SB_REG_SCALE_BIT2__A 0x201001B +#define B_EC_SB_REG_SCALE_LSB__A 0x201001C +#define B_EC_SB_REG_CSI_OFS0__A 0x201001D +#define B_EC_SB_REG_CSI_OFS1__A 0x201001E +#define B_EC_SB_REG_CSI_OFS2__A 0x201001F +#define B_EC_VD_REG_COMM_EXEC__A 0x2090000 +#define B_EC_VD_REG_FORCE__A 0x2090010 +#define B_EC_VD_REG_SET_CODERATE__A 0x2090011 +#define B_EC_VD_REG_SET_CODERATE_C1_2 0x0 +#define B_EC_VD_REG_SET_CODERATE_C2_3 0x1 +#define B_EC_VD_REG_SET_CODERATE_C3_4 0x2 +#define B_EC_VD_REG_SET_CODERATE_C5_6 0x3 +#define B_EC_VD_REG_SET_CODERATE_C7_8 0x4 +#define B_EC_VD_REG_REQ_SMB_CNT__A 0x2090012 +#define B_EC_VD_REG_RLK_ENA__A 0x2090014 +#define B_EC_OD_REG_COMM_EXEC__A 0x2110000 +#define B_EC_OD_REG_SYNC__A 0x2110664 +#define B_EC_OD_DEINT_RAM__A 0x2120000 +#define B_EC_RS_REG_COMM_EXEC__A 0x2130000 +#define B_EC_RS_REG_REQ_PCK_CNT__A 0x2130010 +#define B_EC_RS_REG_VAL__A 0x2130011 +#define B_EC_RS_REG_VAL_PCK 0x1 +#define B_EC_RS_EC_RAM__A 0x2140000 +#define B_EC_OC_REG_COMM_EXEC__A 0x2150000 +#define B_EC_OC_REG_COMM_EXEC_CTL_ACTIVE 0x1 +#define B_EC_OC_REG_COMM_EXEC_CTL_HOLD 0x2 +#define B_EC_OC_REG_COMM_INT_STA__A 0x2150007 +#define B_EC_OC_REG_OC_MODE_LOP__A 0x2150010 +#define B_EC_OC_REG_OC_MODE_LOP_PAR_ENA__M 0x1 +#define B_EC_OC_REG_OC_MODE_LOP_PAR_ENA_ENABLE 0x0 +#define B_EC_OC_REG_OC_MODE_LOP_PAR_ENA_DISABLE 0x1 +#define B_EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC__M 0x4 +#define B_EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC_STATIC 0x0 +#define B_EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE__M 0x80 +#define B_EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE_SERIAL 0x80 +#define B_EC_OC_REG_OC_MODE_HIP__A 0x2150011 +#define B_EC_OC_REG_OC_MODE_HIP_MPG_BUS_SRC_MONITOR 0x10 +#define B_EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL__M 0x200 +#define B_EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_DISABLE 0x0 +#define B_EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_ENABLE 0x200 +#define B_EC_OC_REG_OC_MPG_SIO__A 0x2150012 +#define B_EC_OC_REG_OC_MPG_SIO__M 0xFFF +#define B_EC_OC_REG_DTO_INC_LOP__A 0x2150014 +#define B_EC_OC_REG_DTO_INC_HIP__A 0x2150015 +#define B_EC_OC_REG_SNC_ISC_LVL__A 0x2150016 +#define B_EC_OC_REG_SNC_ISC_LVL_OSC__M 0xF0 +#define B_EC_OC_REG_TMD_TOP_MODE__A 0x215001D +#define B_EC_OC_REG_TMD_TOP_CNT__A 0x215001E +#define B_EC_OC_REG_TMD_HIL_MAR__A 0x215001F +#define B_EC_OC_REG_TMD_LOL_MAR__A 0x2150020 +#define B_EC_OC_REG_TMD_CUR_CNT__A 0x2150021 +#define B_EC_OC_REG_AVR_ASH_CNT__A 0x2150023 +#define B_EC_OC_REG_AVR_BSH_CNT__A 0x2150024 +#define B_EC_OC_REG_RCN_MODE__A 0x2150027 +#define B_EC_OC_REG_RCN_CRA_LOP__A 0x2150028 +#define B_EC_OC_REG_RCN_CRA_HIP__A 0x2150029 +#define B_EC_OC_REG_RCN_CST_LOP__A 0x215002A +#define B_EC_OC_REG_RCN_CST_HIP__A 0x215002B +#define B_EC_OC_REG_RCN_SET_LVL__A 0x215002C +#define B_EC_OC_REG_RCN_GAI_LVL__A 0x215002D +#define B_EC_OC_REG_RCN_CLP_LOP__A 0x2150032 +#define B_EC_OC_REG_RCN_CLP_HIP__A 0x2150033 +#define B_EC_OC_REG_RCN_MAP_LOP__A 0x2150034 +#define B_EC_OC_REG_RCN_MAP_HIP__A 0x2150035 +#define B_EC_OC_REG_OCR_MPG_UOS__A 0x2150036 +#define B_EC_OC_REG_OCR_MPG_UOS__M 0xFFF +#define B_EC_OC_REG_OCR_MPG_UOS_INIT 0x0 +#define B_EC_OC_REG_OCR_MPG_USR_DAT__A 0x2150038 +#define B_EC_OC_REG_IPR_INV_MPG__A 0x2150045 +#define B_EC_OC_REG_DTO_CLKMODE__A 0x2150047 +#define B_EC_OC_REG_DTO_PER__A 0x2150048 +#define B_EC_OC_REG_DTO_BUR__A 0x2150049 +#define B_EC_OC_REG_RCR_CLKMODE__A 0x215004A +#define B_CC_REG_OSC_MODE__A 0x2410010 +#define B_CC_REG_OSC_MODE_M20 0x1 +#define B_CC_REG_PLL_MODE__A 0x2410011 +#define B_CC_REG_PLL_MODE_BYPASS_PLL 0x1 +#define B_CC_REG_PLL_MODE_PUMP_CUR_12 0x14 +#define B_CC_REG_REF_DIVIDE__A 0x2410012 +#define B_CC_REG_PWD_MODE__A 0x2410015 +#define B_CC_REG_PWD_MODE_DOWN_PLL 0x2 +#define B_CC_REG_UPDATE__A 0x2410017 +#define B_CC_REG_UPDATE_KEY 0x3973 +#define B_CC_REG_JTAGID_L__A 0x2410019 +#define B_CC_REG_DIVERSITY__A 0x241001B +#define B_LC_COMM_EXEC__A 0x2800000 +#define B_LC_RA_RAM_IFINCR_NOM_L__A 0x282000C +#define B_LC_RA_RAM_FILTER_SYM_SET__A 0x282001A +#define B_LC_RA_RAM_FILTER_SYM_SET__PRE 0x3E8 +#define B_LC_RA_RAM_FILTER_CRMM_A__A 0x2820060 +#define B_LC_RA_RAM_FILTER_CRMM_A__PRE 0x4 +#define B_LC_RA_RAM_FILTER_CRMM_B__A 0x2820061 +#define B_LC_RA_RAM_FILTER_CRMM_B__PRE 0x1 +#define B_LC_RA_RAM_FILTER_SRMM_A__A 0x2820068 +#define B_LC_RA_RAM_FILTER_SRMM_A__PRE 0x4 +#define B_LC_RA_RAM_FILTER_SRMM_B__A 0x2820069 +#define B_LC_RA_RAM_FILTER_SRMM_B__PRE 0x1 + +#endif diff --git a/drivers/media/dvb-frontends/drxk.h b/drivers/media/dvb-frontends/drxk.h new file mode 100644 index 00000000..e6667189 --- /dev/null +++ b/drivers/media/dvb-frontends/drxk.h @@ -0,0 +1,68 @@ +#ifndef _DRXK_H_ +#define _DRXK_H_ + +#include +#include +#include + +/** + * struct drxk_config - Configure the initial parameters for DRX-K + * + * @adr: I2C Address of the DRX-K + * @parallel_ts: True means that the device uses parallel TS, + * Serial otherwise. + * @dynamic_clk: True means that the clock will be dynamically + * adjusted. Static clock otherwise. + * @enable_merr_cfg: Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG. + * @single_master: Device is on the single master mode + * @no_i2c_bridge: Don't switch the I2C bridge to talk with tuner + * @antenna_gpio: GPIO bit used to control the antenna + * @antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 + * means that 1=DVBC, 0 = DVBT. Zero means the opposite. + * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength. + * @microcode_name: Name of the firmware file with the microcode + * @qam_demod_parameter_count: The number of parameters used for the command + * to set the demodulator parameters. All + * firmwares are using the 2-parameter commmand. + * An exception is the "drxk_a3.mc" firmware, + * which uses the 4-parameter command. + * A value of 0 (default) or lower indicates that + * the correct number of parameters will be + * automatically detected. + * @load_firmware_sync: Force the firmware load to be synchronous. + * + * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is + * UIO-3. + */ +struct drxk_config { + u8 adr; + bool single_master; + bool no_i2c_bridge; + bool parallel_ts; + bool dynamic_clk; + bool enable_merr_cfg; + bool load_firmware_sync; + + bool antenna_dvbt; + u16 antenna_gpio; + + u8 mpeg_out_clk_strength; + int chunk_size; + + const char *microcode_name; + int qam_demod_parameter_count; +}; + +#if IS_ENABLED(CONFIG_DVB_DRXK) +extern struct dvb_frontend *drxk_attach(const struct drxk_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c new file mode 100644 index 00000000..ec24d71e --- /dev/null +++ b/drivers/media/dvb-frontends/drxk_hard.c @@ -0,0 +1,6836 @@ +/* + * drxk_hard: DRX-K DVB-C/T demodulator driver + * + * Copyright (C) 2010-2011 Digital Devices GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "drxk.h" +#include "drxk_hard.h" + +static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode); +static int PowerDownQAM(struct drxk_state *state); +static int SetDVBTStandard(struct drxk_state *state, + enum OperationMode oMode); +static int SetQAMStandard(struct drxk_state *state, + enum OperationMode oMode); +static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz, + s32 tunerFreqOffset); +static int SetDVBTStandard(struct drxk_state *state, + enum OperationMode oMode); +static int DVBTStart(struct drxk_state *state); +static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz, + s32 tunerFreqOffset); +static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus); +static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus); +static int SwitchAntennaToQAM(struct drxk_state *state); +static int SwitchAntennaToDVBT(struct drxk_state *state); + +static bool IsDVBT(struct drxk_state *state) +{ + return state->m_OperationMode == OM_DVBT; +} + +static bool IsQAM(struct drxk_state *state) +{ + return state->m_OperationMode == OM_QAM_ITU_A || + state->m_OperationMode == OM_QAM_ITU_B || + state->m_OperationMode == OM_QAM_ITU_C; +} + +#define NOA1ROM 0 + +#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0) +#define DRXDAP_FASI_LONG_FORMAT(addr) (((addr) & 0xFC30FF80) != 0) + +#define DEFAULT_MER_83 165 +#define DEFAULT_MER_93 250 + +#ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH +#define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02) +#endif + +#ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH +#define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03) +#endif + +#define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700 +#define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500 + +#ifndef DRXK_KI_RAGC_ATV +#define DRXK_KI_RAGC_ATV 4 +#endif +#ifndef DRXK_KI_IAGC_ATV +#define DRXK_KI_IAGC_ATV 6 +#endif +#ifndef DRXK_KI_DAGC_ATV +#define DRXK_KI_DAGC_ATV 7 +#endif + +#ifndef DRXK_KI_RAGC_QAM +#define DRXK_KI_RAGC_QAM 3 +#endif +#ifndef DRXK_KI_IAGC_QAM +#define DRXK_KI_IAGC_QAM 4 +#endif +#ifndef DRXK_KI_DAGC_QAM +#define DRXK_KI_DAGC_QAM 7 +#endif +#ifndef DRXK_KI_RAGC_DVBT +#define DRXK_KI_RAGC_DVBT (IsA1WithPatchCode(state) ? 3 : 2) +#endif +#ifndef DRXK_KI_IAGC_DVBT +#define DRXK_KI_IAGC_DVBT (IsA1WithPatchCode(state) ? 4 : 2) +#endif +#ifndef DRXK_KI_DAGC_DVBT +#define DRXK_KI_DAGC_DVBT (IsA1WithPatchCode(state) ? 10 : 7) +#endif + +#ifndef DRXK_AGC_DAC_OFFSET +#define DRXK_AGC_DAC_OFFSET (0x800) +#endif + +#ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ +#define DRXK_BANDWIDTH_8MHZ_IN_HZ (0x8B8249L) +#endif + +#ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ +#define DRXK_BANDWIDTH_7MHZ_IN_HZ (0x7A1200L) +#endif + +#ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ +#define DRXK_BANDWIDTH_6MHZ_IN_HZ (0x68A1B6L) +#endif + +#ifndef DRXK_QAM_SYMBOLRATE_MAX +#define DRXK_QAM_SYMBOLRATE_MAX (7233000) +#endif + +#define DRXK_BL_ROM_OFFSET_TAPS_DVBT 56 +#define DRXK_BL_ROM_OFFSET_TAPS_ITU_A 64 +#define DRXK_BL_ROM_OFFSET_TAPS_ITU_C 0x5FE0 +#define DRXK_BL_ROM_OFFSET_TAPS_BG 24 +#define DRXK_BL_ROM_OFFSET_TAPS_DKILLP 32 +#define DRXK_BL_ROM_OFFSET_TAPS_NTSC 40 +#define DRXK_BL_ROM_OFFSET_TAPS_FM 48 +#define DRXK_BL_ROM_OFFSET_UCODE 0 + +#define DRXK_BLC_TIMEOUT 100 + +#define DRXK_BLCC_NR_ELEMENTS_TAPS 2 +#define DRXK_BLCC_NR_ELEMENTS_UCODE 6 + +#define DRXK_BLDC_NR_ELEMENTS_TAPS 28 + +#ifndef DRXK_OFDM_NE_NOTCH_WIDTH +#define DRXK_OFDM_NE_NOTCH_WIDTH (4) +#endif + +#define DRXK_QAM_SL_SIG_POWER_QAM16 (40960) +#define DRXK_QAM_SL_SIG_POWER_QAM32 (20480) +#define DRXK_QAM_SL_SIG_POWER_QAM64 (43008) +#define DRXK_QAM_SL_SIG_POWER_QAM128 (20992) +#define DRXK_QAM_SL_SIG_POWER_QAM256 (43520) + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +#define dprintk(level, fmt, arg...) do { \ +if (debug >= level) \ + printk(KERN_DEBUG "drxk: %s" fmt, __func__, ## arg); \ +} while (0) + + +static inline u32 MulDiv32(u32 a, u32 b, u32 c) +{ + u64 tmp64; + + tmp64 = (u64) a * (u64) b; + do_div(tmp64, c); + + return (u32) tmp64; +} + +static inline u32 Frac28a(u32 a, u32 c) +{ + int i = 0; + u32 Q1 = 0; + u32 R0 = 0; + + R0 = (a % c) << 4; /* 32-28 == 4 shifts possible at max */ + Q1 = a / c; /* integer part, only the 4 least significant bits + will be visible in the result */ + + /* division using radix 16, 7 nibbles in the result */ + for (i = 0; i < 7; i++) { + Q1 = (Q1 << 4) | (R0 / c); + R0 = (R0 % c) << 4; + } + /* rounding */ + if ((R0 >> 3) >= c) + Q1++; + + return Q1; +} + +static u32 Log10Times100(u32 x) +{ + static const u8 scale = 15; + static const u8 indexWidth = 5; + u8 i = 0; + u32 y = 0; + u32 d = 0; + u32 k = 0; + u32 r = 0; + /* + log2lut[n] = (1< 0; k--) { + if (x & (((u32) 1) << scale)) + break; + x <<= 1; + } + } else { + for (k = scale; k < 31; k++) { + if ((x & (((u32) (-1)) << (scale + 1))) == 0) + break; + x >>= 1; + } + } + /* + Now x has binary point between bit[scale] and bit[scale-1] + and 1.0 <= x < 2.0 */ + + /* correction for divison: log(x) = log(x/y)+log(y) */ + y = k * ((((u32) 1) << scale) * 200); + + /* remove integer part */ + x &= ((((u32) 1) << scale) - 1); + /* get index */ + i = (u8) (x >> (scale - indexWidth)); + /* compute delta (x - a) */ + d = x & ((((u32) 1) << (scale - indexWidth)) - 1); + /* compute log, multiplication (d* (..)) must be within range ! */ + y += log2lut[i] + + ((d * (log2lut[i + 1] - log2lut[i])) >> (scale - indexWidth)); + /* Conver to log10() */ + y /= 108853; /* (log2(10) << scale) */ + r = (y >> 1); + /* rounding */ + if (y & ((u32) 1)) + r++; + return r; +} + +/****************************************************************************/ +/* I2C **********************************************************************/ +/****************************************************************************/ + +static int drxk_i2c_lock(struct drxk_state *state) +{ + i2c_lock_adapter(state->i2c); + state->drxk_i2c_exclusive_lock = true; + + return 0; +} + +static void drxk_i2c_unlock(struct drxk_state *state) +{ + if (!state->drxk_i2c_exclusive_lock) + return; + + i2c_unlock_adapter(state->i2c); + state->drxk_i2c_exclusive_lock = false; +} + +static int drxk_i2c_transfer(struct drxk_state *state, struct i2c_msg *msgs, + unsigned len) +{ + if (state->drxk_i2c_exclusive_lock) + return __i2c_transfer(state->i2c, msgs, len); + else + return i2c_transfer(state->i2c, msgs, len); +} + +static int i2c_read1(struct drxk_state *state, u8 adr, u8 *val) +{ + struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1} + }; + + return drxk_i2c_transfer(state, msgs, 1); +} + +static int i2c_write(struct drxk_state *state, u8 adr, u8 *data, int len) +{ + int status; + struct i2c_msg msg = { + .addr = adr, .flags = 0, .buf = data, .len = len }; + + dprintk(3, ":"); + if (debug > 2) { + int i; + for (i = 0; i < len; i++) + printk(KERN_CONT " %02x", data[i]); + printk(KERN_CONT "\n"); + } + status = drxk_i2c_transfer(state, &msg, 1); + if (status >= 0 && status != 1) + status = -EIO; + + if (status < 0) + printk(KERN_ERR "drxk: i2c write error at addr 0x%02x\n", adr); + + return status; +} + +static int i2c_read(struct drxk_state *state, + u8 adr, u8 *msg, int len, u8 *answ, int alen) +{ + int status; + struct i2c_msg msgs[2] = { + {.addr = adr, .flags = 0, + .buf = msg, .len = len}, + {.addr = adr, .flags = I2C_M_RD, + .buf = answ, .len = alen} + }; + + status = drxk_i2c_transfer(state, msgs, 2); + if (status != 2) { + if (debug > 2) + printk(KERN_CONT ": ERROR!\n"); + if (status >= 0) + status = -EIO; + + printk(KERN_ERR "drxk: i2c read error at addr 0x%02x\n", adr); + return status; + } + if (debug > 2) { + int i; + dprintk(2, ": read from"); + for (i = 0; i < len; i++) + printk(KERN_CONT " %02x", msg[i]); + printk(KERN_CONT ", value = "); + for (i = 0; i < alen; i++) + printk(KERN_CONT " %02x", answ[i]); + printk(KERN_CONT "\n"); + } + return 0; +} + +static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags) +{ + int status; + u8 adr = state->demod_address, mm1[4], mm2[2], len; + + if (state->single_master) + flags |= 0xC0; + + if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { + mm1[0] = (((reg << 1) & 0xFF) | 0x01); + mm1[1] = ((reg >> 16) & 0xFF); + mm1[2] = ((reg >> 24) & 0xFF) | flags; + mm1[3] = ((reg >> 7) & 0xFF); + len = 4; + } else { + mm1[0] = ((reg << 1) & 0xFF); + mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); + len = 2; + } + dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); + status = i2c_read(state, adr, mm1, len, mm2, 2); + if (status < 0) + return status; + if (data) + *data = mm2[0] | (mm2[1] << 8); + + return 0; +} + +static int read16(struct drxk_state *state, u32 reg, u16 *data) +{ + return read16_flags(state, reg, data, 0); +} + +static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags) +{ + int status; + u8 adr = state->demod_address, mm1[4], mm2[4], len; + + if (state->single_master) + flags |= 0xC0; + + if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { + mm1[0] = (((reg << 1) & 0xFF) | 0x01); + mm1[1] = ((reg >> 16) & 0xFF); + mm1[2] = ((reg >> 24) & 0xFF) | flags; + mm1[3] = ((reg >> 7) & 0xFF); + len = 4; + } else { + mm1[0] = ((reg << 1) & 0xFF); + mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); + len = 2; + } + dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); + status = i2c_read(state, adr, mm1, len, mm2, 4); + if (status < 0) + return status; + if (data) + *data = mm2[0] | (mm2[1] << 8) | + (mm2[2] << 16) | (mm2[3] << 24); + + return 0; +} + +static int read32(struct drxk_state *state, u32 reg, u32 *data) +{ + return read32_flags(state, reg, data, 0); +} + +static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags) +{ + u8 adr = state->demod_address, mm[6], len; + + if (state->single_master) + flags |= 0xC0; + if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { + mm[0] = (((reg << 1) & 0xFF) | 0x01); + mm[1] = ((reg >> 16) & 0xFF); + mm[2] = ((reg >> 24) & 0xFF) | flags; + mm[3] = ((reg >> 7) & 0xFF); + len = 4; + } else { + mm[0] = ((reg << 1) & 0xFF); + mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); + len = 2; + } + mm[len] = data & 0xff; + mm[len + 1] = (data >> 8) & 0xff; + + dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags); + return i2c_write(state, adr, mm, len + 2); +} + +static int write16(struct drxk_state *state, u32 reg, u16 data) +{ + return write16_flags(state, reg, data, 0); +} + +static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags) +{ + u8 adr = state->demod_address, mm[8], len; + + if (state->single_master) + flags |= 0xC0; + if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { + mm[0] = (((reg << 1) & 0xFF) | 0x01); + mm[1] = ((reg >> 16) & 0xFF); + mm[2] = ((reg >> 24) & 0xFF) | flags; + mm[3] = ((reg >> 7) & 0xFF); + len = 4; + } else { + mm[0] = ((reg << 1) & 0xFF); + mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); + len = 2; + } + mm[len] = data & 0xff; + mm[len + 1] = (data >> 8) & 0xff; + mm[len + 2] = (data >> 16) & 0xff; + mm[len + 3] = (data >> 24) & 0xff; + dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags); + + return i2c_write(state, adr, mm, len + 4); +} + +static int write32(struct drxk_state *state, u32 reg, u32 data) +{ + return write32_flags(state, reg, data, 0); +} + +static int write_block(struct drxk_state *state, u32 Address, + const int BlockSize, const u8 pBlock[]) +{ + int status = 0, BlkSize = BlockSize; + u8 Flags = 0; + + if (state->single_master) + Flags |= 0xC0; + + while (BlkSize > 0) { + int Chunk = BlkSize > state->m_ChunkSize ? + state->m_ChunkSize : BlkSize; + u8 *AdrBuf = &state->Chunk[0]; + u32 AdrLength = 0; + + if (DRXDAP_FASI_LONG_FORMAT(Address) || (Flags != 0)) { + AdrBuf[0] = (((Address << 1) & 0xFF) | 0x01); + AdrBuf[1] = ((Address >> 16) & 0xFF); + AdrBuf[2] = ((Address >> 24) & 0xFF); + AdrBuf[3] = ((Address >> 7) & 0xFF); + AdrBuf[2] |= Flags; + AdrLength = 4; + if (Chunk == state->m_ChunkSize) + Chunk -= 2; + } else { + AdrBuf[0] = ((Address << 1) & 0xFF); + AdrBuf[1] = (((Address >> 16) & 0x0F) | + ((Address >> 18) & 0xF0)); + AdrLength = 2; + } + memcpy(&state->Chunk[AdrLength], pBlock, Chunk); + dprintk(2, "(0x%08x, 0x%02x)\n", Address, Flags); + if (debug > 1) { + int i; + if (pBlock) + for (i = 0; i < Chunk; i++) + printk(KERN_CONT " %02x", pBlock[i]); + printk(KERN_CONT "\n"); + } + status = i2c_write(state, state->demod_address, + &state->Chunk[0], Chunk + AdrLength); + if (status < 0) { + printk(KERN_ERR "drxk: %s: i2c write error at addr 0x%02x\n", + __func__, Address); + break; + } + pBlock += Chunk; + Address += (Chunk >> 1); + BlkSize -= Chunk; + } + return status; +} + +#ifndef DRXK_MAX_RETRIES_POWERUP +#define DRXK_MAX_RETRIES_POWERUP 20 +#endif + +static int PowerUpDevice(struct drxk_state *state) +{ + int status; + u8 data = 0; + u16 retryCount = 0; + + dprintk(1, "\n"); + + status = i2c_read1(state, state->demod_address, &data); + if (status < 0) { + do { + data = 0; + status = i2c_write(state, state->demod_address, + &data, 1); + msleep(10); + retryCount++; + if (status < 0) + continue; + status = i2c_read1(state, state->demod_address, + &data); + } while (status < 0 && + (retryCount < DRXK_MAX_RETRIES_POWERUP)); + if (status < 0 && retryCount >= DRXK_MAX_RETRIES_POWERUP) + goto error; + } + + /* Make sure all clk domains are active */ + status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE); + if (status < 0) + goto error; + status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); + if (status < 0) + goto error; + /* Enable pll lock tests */ + status = write16(state, SIO_CC_PLL_LOCK__A, 1); + if (status < 0) + goto error; + + state->m_currentPowerMode = DRX_POWER_UP; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + + +static int init_state(struct drxk_state *state) +{ + /* + * FIXME: most (all?) of the values bellow should be moved into + * struct drxk_config, as they are probably board-specific + */ + u32 ulVSBIfAgcMode = DRXK_AGC_CTRL_AUTO; + u32 ulVSBIfAgcOutputLevel = 0; + u32 ulVSBIfAgcMinLevel = 0; + u32 ulVSBIfAgcMaxLevel = 0x7FFF; + u32 ulVSBIfAgcSpeed = 3; + + u32 ulVSBRfAgcMode = DRXK_AGC_CTRL_AUTO; + u32 ulVSBRfAgcOutputLevel = 0; + u32 ulVSBRfAgcMinLevel = 0; + u32 ulVSBRfAgcMaxLevel = 0x7FFF; + u32 ulVSBRfAgcSpeed = 3; + u32 ulVSBRfAgcTop = 9500; + u32 ulVSBRfAgcCutOffCurrent = 4000; + + u32 ulATVIfAgcMode = DRXK_AGC_CTRL_AUTO; + u32 ulATVIfAgcOutputLevel = 0; + u32 ulATVIfAgcMinLevel = 0; + u32 ulATVIfAgcMaxLevel = 0; + u32 ulATVIfAgcSpeed = 3; + + u32 ulATVRfAgcMode = DRXK_AGC_CTRL_OFF; + u32 ulATVRfAgcOutputLevel = 0; + u32 ulATVRfAgcMinLevel = 0; + u32 ulATVRfAgcMaxLevel = 0; + u32 ulATVRfAgcTop = 9500; + u32 ulATVRfAgcCutOffCurrent = 4000; + u32 ulATVRfAgcSpeed = 3; + + u32 ulQual83 = DEFAULT_MER_83; + u32 ulQual93 = DEFAULT_MER_93; + + u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; + u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; + + /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ + /* io_pad_cfg_mode output mode is drive always */ + /* io_pad_cfg_drive is set to power 2 (23 mA) */ + u32 ulGPIOCfg = 0x0113; + u32 ulInvertTSClock = 0; + u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH; + u32 ulDVBTBitrate = 50000000; + u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8; + + u32 ulInsertRSByte = 0; + + u32 ulRfMirror = 1; + u32 ulPowerDown = 0; + + dprintk(1, "\n"); + + state->m_hasLNA = false; + state->m_hasDVBT = false; + state->m_hasDVBC = false; + state->m_hasATV = false; + state->m_hasOOB = false; + state->m_hasAudio = false; + + if (!state->m_ChunkSize) + state->m_ChunkSize = 124; + + state->m_oscClockFreq = 0; + state->m_smartAntInverted = false; + state->m_bPDownOpenBridge = false; + + /* real system clock frequency in kHz */ + state->m_sysClockFreq = 151875; + /* Timing div, 250ns/Psys */ + /* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */ + state->m_HICfgTimingDiv = ((state->m_sysClockFreq / 1000) * + HI_I2C_DELAY) / 1000; + /* Clipping */ + if (state->m_HICfgTimingDiv > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M) + state->m_HICfgTimingDiv = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M; + state->m_HICfgWakeUpKey = (state->demod_address << 1); + /* port/bridge/power down ctrl */ + state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; + + state->m_bPowerDown = (ulPowerDown != 0); + + state->m_DRXK_A3_PATCH_CODE = false; + + /* Init AGC and PGA parameters */ + /* VSB IF */ + state->m_vsbIfAgcCfg.ctrlMode = (ulVSBIfAgcMode); + state->m_vsbIfAgcCfg.outputLevel = (ulVSBIfAgcOutputLevel); + state->m_vsbIfAgcCfg.minOutputLevel = (ulVSBIfAgcMinLevel); + state->m_vsbIfAgcCfg.maxOutputLevel = (ulVSBIfAgcMaxLevel); + state->m_vsbIfAgcCfg.speed = (ulVSBIfAgcSpeed); + state->m_vsbPgaCfg = 140; + + /* VSB RF */ + state->m_vsbRfAgcCfg.ctrlMode = (ulVSBRfAgcMode); + state->m_vsbRfAgcCfg.outputLevel = (ulVSBRfAgcOutputLevel); + state->m_vsbRfAgcCfg.minOutputLevel = (ulVSBRfAgcMinLevel); + state->m_vsbRfAgcCfg.maxOutputLevel = (ulVSBRfAgcMaxLevel); + state->m_vsbRfAgcCfg.speed = (ulVSBRfAgcSpeed); + state->m_vsbRfAgcCfg.top = (ulVSBRfAgcTop); + state->m_vsbRfAgcCfg.cutOffCurrent = (ulVSBRfAgcCutOffCurrent); + state->m_vsbPreSawCfg.reference = 0x07; + state->m_vsbPreSawCfg.usePreSaw = true; + + state->m_Quality83percent = DEFAULT_MER_83; + state->m_Quality93percent = DEFAULT_MER_93; + if (ulQual93 <= 500 && ulQual83 < ulQual93) { + state->m_Quality83percent = ulQual83; + state->m_Quality93percent = ulQual93; + } + + /* ATV IF */ + state->m_atvIfAgcCfg.ctrlMode = (ulATVIfAgcMode); + state->m_atvIfAgcCfg.outputLevel = (ulATVIfAgcOutputLevel); + state->m_atvIfAgcCfg.minOutputLevel = (ulATVIfAgcMinLevel); + state->m_atvIfAgcCfg.maxOutputLevel = (ulATVIfAgcMaxLevel); + state->m_atvIfAgcCfg.speed = (ulATVIfAgcSpeed); + + /* ATV RF */ + state->m_atvRfAgcCfg.ctrlMode = (ulATVRfAgcMode); + state->m_atvRfAgcCfg.outputLevel = (ulATVRfAgcOutputLevel); + state->m_atvRfAgcCfg.minOutputLevel = (ulATVRfAgcMinLevel); + state->m_atvRfAgcCfg.maxOutputLevel = (ulATVRfAgcMaxLevel); + state->m_atvRfAgcCfg.speed = (ulATVRfAgcSpeed); + state->m_atvRfAgcCfg.top = (ulATVRfAgcTop); + state->m_atvRfAgcCfg.cutOffCurrent = (ulATVRfAgcCutOffCurrent); + state->m_atvPreSawCfg.reference = 0x04; + state->m_atvPreSawCfg.usePreSaw = true; + + + /* DVBT RF */ + state->m_dvbtRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF; + state->m_dvbtRfAgcCfg.outputLevel = 0; + state->m_dvbtRfAgcCfg.minOutputLevel = 0; + state->m_dvbtRfAgcCfg.maxOutputLevel = 0xFFFF; + state->m_dvbtRfAgcCfg.top = 0x2100; + state->m_dvbtRfAgcCfg.cutOffCurrent = 4000; + state->m_dvbtRfAgcCfg.speed = 1; + + + /* DVBT IF */ + state->m_dvbtIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO; + state->m_dvbtIfAgcCfg.outputLevel = 0; + state->m_dvbtIfAgcCfg.minOutputLevel = 0; + state->m_dvbtIfAgcCfg.maxOutputLevel = 9000; + state->m_dvbtIfAgcCfg.top = 13424; + state->m_dvbtIfAgcCfg.cutOffCurrent = 0; + state->m_dvbtIfAgcCfg.speed = 3; + state->m_dvbtIfAgcCfg.FastClipCtrlDelay = 30; + state->m_dvbtIfAgcCfg.IngainTgtMax = 30000; + /* state->m_dvbtPgaCfg = 140; */ + + state->m_dvbtPreSawCfg.reference = 4; + state->m_dvbtPreSawCfg.usePreSaw = false; + + /* QAM RF */ + state->m_qamRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF; + state->m_qamRfAgcCfg.outputLevel = 0; + state->m_qamRfAgcCfg.minOutputLevel = 6023; + state->m_qamRfAgcCfg.maxOutputLevel = 27000; + state->m_qamRfAgcCfg.top = 0x2380; + state->m_qamRfAgcCfg.cutOffCurrent = 4000; + state->m_qamRfAgcCfg.speed = 3; + + /* QAM IF */ + state->m_qamIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO; + state->m_qamIfAgcCfg.outputLevel = 0; + state->m_qamIfAgcCfg.minOutputLevel = 0; + state->m_qamIfAgcCfg.maxOutputLevel = 9000; + state->m_qamIfAgcCfg.top = 0x0511; + state->m_qamIfAgcCfg.cutOffCurrent = 0; + state->m_qamIfAgcCfg.speed = 3; + state->m_qamIfAgcCfg.IngainTgtMax = 5119; + state->m_qamIfAgcCfg.FastClipCtrlDelay = 50; + + state->m_qamPgaCfg = 140; + state->m_qamPreSawCfg.reference = 4; + state->m_qamPreSawCfg.usePreSaw = false; + + state->m_OperationMode = OM_NONE; + state->m_DrxkState = DRXK_UNINITIALIZED; + + /* MPEG output configuration */ + state->m_enableMPEGOutput = true; /* If TRUE; enable MPEG ouput */ + state->m_insertRSByte = false; /* If TRUE; insert RS byte */ + state->m_invertDATA = false; /* If TRUE; invert DATA signals */ + state->m_invertERR = false; /* If TRUE; invert ERR signal */ + state->m_invertSTR = false; /* If TRUE; invert STR signals */ + state->m_invertVAL = false; /* If TRUE; invert VAL signals */ + state->m_invertCLK = (ulInvertTSClock != 0); /* If TRUE; invert CLK signals */ + + /* If TRUE; static MPEG clockrate will be used; + otherwise clockrate will adapt to the bitrate of the TS */ + + state->m_DVBTBitrate = ulDVBTBitrate; + state->m_DVBCBitrate = ulDVBCBitrate; + + state->m_TSDataStrength = (ulTSDataStrength & 0x07); + + /* Maximum bitrate in b/s in case static clockrate is selected */ + state->m_mpegTsStaticBitrate = 19392658; + state->m_disableTEIhandling = false; + + if (ulInsertRSByte) + state->m_insertRSByte = true; + + state->m_MpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; + if (ulMpegLockTimeOut < 10000) + state->m_MpegLockTimeOut = ulMpegLockTimeOut; + state->m_DemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; + if (ulDemodLockTimeOut < 10000) + state->m_DemodLockTimeOut = ulDemodLockTimeOut; + + /* QAM defaults */ + state->m_Constellation = DRX_CONSTELLATION_AUTO; + state->m_qamInterleaveMode = DRXK_QAM_I12_J17; + state->m_fecRsPlen = 204 * 8; /* fecRsPlen annex A */ + state->m_fecRsPrescale = 1; + + state->m_sqiSpeed = DRXK_DVBT_SQI_SPEED_MEDIUM; + state->m_agcFastClipCtrlDelay = 0; + + state->m_GPIOCfg = (ulGPIOCfg); + + state->m_bPowerDown = false; + state->m_currentPowerMode = DRX_POWER_DOWN; + + state->m_rfmirror = (ulRfMirror == 0); + state->m_IfAgcPol = false; + return 0; +} + +static int DRXX_Open(struct drxk_state *state) +{ + int status = 0; + u32 jtag = 0; + u16 bid = 0; + u16 key = 0; + + dprintk(1, "\n"); + /* stop lock indicator process */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + /* Check device id */ + status = read16(state, SIO_TOP_COMM_KEY__A, &key); + if (status < 0) + goto error; + status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); + if (status < 0) + goto error; + status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag); + if (status < 0) + goto error; + status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid); + if (status < 0) + goto error; + status = write16(state, SIO_TOP_COMM_KEY__A, key); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int GetDeviceCapabilities(struct drxk_state *state) +{ + u16 sioPdrOhwCfg = 0; + u32 sioTopJtagidLo = 0; + int status; + const char *spin = ""; + + dprintk(1, "\n"); + + /* driver 0.9.0 */ + /* stop lock indicator process */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); + if (status < 0) + goto error; + status = read16(state, SIO_PDR_OHW_CFG__A, &sioPdrOhwCfg); + if (status < 0) + goto error; + status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); + if (status < 0) + goto error; + + switch ((sioPdrOhwCfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) { + case 0: + /* ignore (bypass ?) */ + break; + case 1: + /* 27 MHz */ + state->m_oscClockFreq = 27000; + break; + case 2: + /* 20.25 MHz */ + state->m_oscClockFreq = 20250; + break; + case 3: + /* 4 MHz */ + state->m_oscClockFreq = 20250; + break; + default: + printk(KERN_ERR "drxk: Clock Frequency is unknown\n"); + return -EINVAL; + } + /* + Determine device capabilities + Based on pinning v14 + */ + status = read32(state, SIO_TOP_JTAGID_LO__A, &sioTopJtagidLo); + if (status < 0) + goto error; + + printk(KERN_INFO "drxk: status = 0x%08x\n", sioTopJtagidLo); + + /* driver 0.9.0 */ + switch ((sioTopJtagidLo >> 29) & 0xF) { + case 0: + state->m_deviceSpin = DRXK_SPIN_A1; + spin = "A1"; + break; + case 2: + state->m_deviceSpin = DRXK_SPIN_A2; + spin = "A2"; + break; + case 3: + state->m_deviceSpin = DRXK_SPIN_A3; + spin = "A3"; + break; + default: + state->m_deviceSpin = DRXK_SPIN_UNKNOWN; + status = -EINVAL; + printk(KERN_ERR "drxk: Spin %d unknown\n", + (sioTopJtagidLo >> 29) & 0xF); + goto error2; + } + switch ((sioTopJtagidLo >> 12) & 0xFF) { + case 0x13: + /* typeId = DRX3913K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = false; + state->m_hasAudio = false; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = false; + state->m_hasGPIO1 = false; + state->m_hasIRQN = false; + break; + case 0x15: + /* typeId = DRX3915K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = false; + state->m_hasDVBT = true; + state->m_hasDVBC = false; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x16: + /* typeId = DRX3916K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = false; + state->m_hasDVBT = true; + state->m_hasDVBC = false; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x18: + /* typeId = DRX3918K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = true; + state->m_hasDVBT = true; + state->m_hasDVBC = false; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x21: + /* typeId = DRX3921K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = true; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x23: + /* typeId = DRX3923K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = true; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x25: + /* typeId = DRX3925K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = true; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x26: + /* typeId = DRX3926K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = false; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + default: + printk(KERN_ERR "drxk: DeviceID 0x%02x not supported\n", + ((sioTopJtagidLo >> 12) & 0xFF)); + status = -EINVAL; + goto error2; + } + + printk(KERN_INFO + "drxk: detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n", + ((sioTopJtagidLo >> 12) & 0xFF), spin, + state->m_oscClockFreq / 1000, + state->m_oscClockFreq % 1000); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + +error2: + return status; +} + +static int HI_Command(struct drxk_state *state, u16 cmd, u16 *pResult) +{ + int status; + bool powerdown_cmd; + + dprintk(1, "\n"); + + /* Write command */ + status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd); + if (status < 0) + goto error; + if (cmd == SIO_HI_RA_RAM_CMD_RESET) + msleep(1); + + powerdown_cmd = + (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) && + ((state->m_HICfgCtrl) & + SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) == + SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ); + if (powerdown_cmd == false) { + /* Wait until command rdy */ + u32 retryCount = 0; + u16 waitCmd; + + do { + msleep(1); + retryCount += 1; + status = read16(state, SIO_HI_RA_RAM_CMD__A, + &waitCmd); + } while ((status < 0) && (retryCount < DRXK_MAX_RETRIES) + && (waitCmd != 0)); + if (status < 0) + goto error; + status = read16(state, SIO_HI_RA_RAM_RES__A, pResult); + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int HI_CfgCommand(struct drxk_state *state) +{ + int status; + + dprintk(1, "\n"); + + mutex_lock(&state->mutex); + + status = write16(state, SIO_HI_RA_RAM_PAR_6__A, state->m_HICfgTimeout); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_5__A, state->m_HICfgCtrl); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_4__A, state->m_HICfgWakeUpKey); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_3__A, state->m_HICfgBridgeDelay); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_2__A, state->m_HICfgTimingDiv); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); + if (status < 0) + goto error; + status = HI_Command(state, SIO_HI_RA_RAM_CMD_CONFIG, 0); + if (status < 0) + goto error; + + state->m_HICfgCtrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; +error: + mutex_unlock(&state->mutex); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int InitHI(struct drxk_state *state) +{ + dprintk(1, "\n"); + + state->m_HICfgWakeUpKey = (state->demod_address << 1); + state->m_HICfgTimeout = 0x96FF; + /* port/bridge/power down ctrl */ + state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; + + return HI_CfgCommand(state); +} + +static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable) +{ + int status = -1; + u16 sioPdrMclkCfg = 0; + u16 sioPdrMdxCfg = 0; + u16 err_cfg = 0; + + dprintk(1, ": mpeg %s, %s mode\n", + mpegEnable ? "enable" : "disable", + state->m_enableParallel ? "parallel" : "serial"); + + /* stop lock indicator process */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + + /* MPEG TS pad configuration */ + status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); + if (status < 0) + goto error; + + if (mpegEnable == false) { + /* Set MPEG TS pads to inputmode */ + status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); + if (status < 0) + goto error; + } else { + /* Enable MPEG output */ + sioPdrMdxCfg = + ((state->m_TSDataStrength << + SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003); + sioPdrMclkCfg = ((state->m_TSClockkStrength << + SIO_PDR_MCLK_CFG_DRIVE__B) | + 0x0003); + + status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + + if (state->enable_merr_cfg) + err_cfg = sioPdrMdxCfg; + + status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg); + if (status < 0) + goto error; + + if (state->m_enableParallel == true) { + /* paralel -> enable MD1 to MD7 */ + status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD2_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD3_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD4_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD5_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD6_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD7_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + } else { + sioPdrMdxCfg = ((state->m_TSDataStrength << + SIO_PDR_MD0_CFG_DRIVE__B) + | 0x0003); + /* serial -> disable MD1 to MD7 */ + status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); + if (status < 0) + goto error; + } + status = write16(state, SIO_PDR_MCLK_CFG__A, sioPdrMclkCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD0_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + } + /* Enable MB output over MPEG pads and ctl input */ + status = write16(state, SIO_PDR_MON_CFG__A, 0x0000); + if (status < 0) + goto error; + /* Write nomagic word to enable pdr reg write */ + status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int MPEGTSDisable(struct drxk_state *state) +{ + dprintk(1, "\n"); + + return MPEGTSConfigurePins(state, false); +} + +static int BLChainCmd(struct drxk_state *state, + u16 romOffset, u16 nrOfElements, u32 timeOut) +{ + u16 blStatus = 0; + int status; + unsigned long end; + + dprintk(1, "\n"); + mutex_lock(&state->mutex); + status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN); + if (status < 0) + goto error; + status = write16(state, SIO_BL_CHAIN_ADDR__A, romOffset); + if (status < 0) + goto error; + status = write16(state, SIO_BL_CHAIN_LEN__A, nrOfElements); + if (status < 0) + goto error; + status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); + if (status < 0) + goto error; + + end = jiffies + msecs_to_jiffies(timeOut); + do { + msleep(1); + status = read16(state, SIO_BL_STATUS__A, &blStatus); + if (status < 0) + goto error; + } while ((blStatus == 0x1) && + ((time_is_after_jiffies(end)))); + + if (blStatus == 0x1) { + printk(KERN_ERR "drxk: SIO not ready\n"); + status = -EINVAL; + goto error2; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); +error2: + mutex_unlock(&state->mutex); + return status; +} + + +static int DownloadMicrocode(struct drxk_state *state, + const u8 pMCImage[], u32 Length) +{ + const u8 *pSrc = pMCImage; + u32 Address; + u16 nBlocks; + u16 BlockSize; + u32 offset = 0; + u32 i; + int status = 0; + + dprintk(1, "\n"); + + /* down the drain (we don't care about MAGIC_WORD) */ +#if 0 + /* For future reference */ + Drain = (pSrc[0] << 8) | pSrc[1]; +#endif + pSrc += sizeof(u16); + offset += sizeof(u16); + nBlocks = (pSrc[0] << 8) | pSrc[1]; + pSrc += sizeof(u16); + offset += sizeof(u16); + + for (i = 0; i < nBlocks; i += 1) { + Address = (pSrc[0] << 24) | (pSrc[1] << 16) | + (pSrc[2] << 8) | pSrc[3]; + pSrc += sizeof(u32); + offset += sizeof(u32); + + BlockSize = ((pSrc[0] << 8) | pSrc[1]) * sizeof(u16); + pSrc += sizeof(u16); + offset += sizeof(u16); + +#if 0 + /* For future reference */ + Flags = (pSrc[0] << 8) | pSrc[1]; +#endif + pSrc += sizeof(u16); + offset += sizeof(u16); + +#if 0 + /* For future reference */ + BlockCRC = (pSrc[0] << 8) | pSrc[1]; +#endif + pSrc += sizeof(u16); + offset += sizeof(u16); + + if (offset + BlockSize > Length) { + printk(KERN_ERR "drxk: Firmware is corrupted.\n"); + return -EINVAL; + } + + status = write_block(state, Address, BlockSize, pSrc); + if (status < 0) { + printk(KERN_ERR "drxk: Error %d while loading firmware\n", status); + break; + } + pSrc += BlockSize; + offset += BlockSize; + } + return status; +} + +static int DVBTEnableOFDMTokenRing(struct drxk_state *state, bool enable) +{ + int status; + u16 data = 0; + u16 desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON; + u16 desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED; + unsigned long end; + + dprintk(1, "\n"); + + if (enable == false) { + desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF; + desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN; + } + + status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); + if (status >= 0 && data == desiredStatus) { + /* tokenring already has correct status */ + return status; + } + /* Disable/enable dvbt tokenring bridge */ + status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desiredCtrl); + + end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT); + do { + status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); + if ((status >= 0 && data == desiredStatus) || time_is_after_jiffies(end)) + break; + msleep(1); + } while (1); + if (data != desiredStatus) { + printk(KERN_ERR "drxk: SIO not ready\n"); + return -EINVAL; + } + return status; +} + +static int MPEGTSStop(struct drxk_state *state) +{ + int status = 0; + u16 fecOcSncMode = 0; + u16 fecOcIprMode = 0; + + dprintk(1, "\n"); + + /* Gracefull shutdown (byte boundaries) */ + status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode); + if (status < 0) + goto error; + fecOcSncMode |= FEC_OC_SNC_MODE_SHUTDOWN__M; + status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode); + if (status < 0) + goto error; + + /* Suppress MCLK during absence of data */ + status = read16(state, FEC_OC_IPR_MODE__A, &fecOcIprMode); + if (status < 0) + goto error; + fecOcIprMode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M; + status = write16(state, FEC_OC_IPR_MODE__A, fecOcIprMode); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int scu_command(struct drxk_state *state, + u16 cmd, u8 parameterLen, + u16 *parameter, u8 resultLen, u16 *result) +{ +#if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15 +#error DRXK register mapping no longer compatible with this routine! +#endif + u16 curCmd = 0; + int status = -EINVAL; + unsigned long end; + u8 buffer[34]; + int cnt = 0, ii; + const char *p; + char errname[30]; + + dprintk(1, "\n"); + + if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) || + ((resultLen > 0) && (result == NULL))) { + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; + } + + mutex_lock(&state->mutex); + + /* assume that the command register is ready + since it is checked afterwards */ + for (ii = parameterLen - 1; ii >= 0; ii -= 1) { + buffer[cnt++] = (parameter[ii] & 0xFF); + buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF); + } + buffer[cnt++] = (cmd & 0xFF); + buffer[cnt++] = ((cmd >> 8) & 0xFF); + + write_block(state, SCU_RAM_PARAM_0__A - + (parameterLen - 1), cnt, buffer); + /* Wait until SCU has processed command */ + end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME); + do { + msleep(1); + status = read16(state, SCU_RAM_COMMAND__A, &curCmd); + if (status < 0) + goto error; + } while (!(curCmd == DRX_SCU_READY) && (time_is_after_jiffies(end))); + if (curCmd != DRX_SCU_READY) { + printk(KERN_ERR "drxk: SCU not ready\n"); + status = -EIO; + goto error2; + } + /* read results */ + if ((resultLen > 0) && (result != NULL)) { + s16 err; + int ii; + + for (ii = resultLen - 1; ii >= 0; ii -= 1) { + status = read16(state, SCU_RAM_PARAM_0__A - ii, &result[ii]); + if (status < 0) + goto error; + } + + /* Check if an error was reported by SCU */ + err = (s16)result[0]; + if (err >= 0) + goto error; + + /* check for the known error codes */ + switch (err) { + case SCU_RESULT_UNKCMD: + p = "SCU_RESULT_UNKCMD"; + break; + case SCU_RESULT_UNKSTD: + p = "SCU_RESULT_UNKSTD"; + break; + case SCU_RESULT_SIZE: + p = "SCU_RESULT_SIZE"; + break; + case SCU_RESULT_INVPAR: + p = "SCU_RESULT_INVPAR"; + break; + default: /* Other negative values are errors */ + sprintf(errname, "ERROR: %d\n", err); + p = errname; + } + printk(KERN_ERR "drxk: %s while sending cmd 0x%04x with params:", p, cmd); + print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt); + status = -EINVAL; + goto error2; + } + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); +error2: + mutex_unlock(&state->mutex); + return status; +} + +static int SetIqmAf(struct drxk_state *state, bool active) +{ + u16 data = 0; + int status; + + dprintk(1, "\n"); + + /* Configure IQM */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + + if (!active) { + data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY + | IQM_AF_STDBY_STDBY_AMP_STANDBY + | IQM_AF_STDBY_STDBY_PD_STANDBY + | IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY + | IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY); + } else { + data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY) + & (~IQM_AF_STDBY_STDBY_AMP_STANDBY) + & (~IQM_AF_STDBY_STDBY_PD_STANDBY) + & (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY) + & (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY) + ); + } + status = write16(state, IQM_AF_STDBY__A, data); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int CtrlPowerMode(struct drxk_state *state, enum DRXPowerMode *mode) +{ + int status = 0; + u16 sioCcPwdMode = 0; + + dprintk(1, "\n"); + + /* Check arguments */ + if (mode == NULL) + return -EINVAL; + + switch (*mode) { + case DRX_POWER_UP: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_NONE; + break; + case DRXK_POWER_DOWN_OFDM: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OFDM; + break; + case DRXK_POWER_DOWN_CORE: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_CLOCK; + break; + case DRXK_POWER_DOWN_PLL: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_PLL; + break; + case DRX_POWER_DOWN: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OSC; + break; + default: + /* Unknow sleep mode */ + return -EINVAL; + } + + /* If already in requested power mode, do nothing */ + if (state->m_currentPowerMode == *mode) + return 0; + + /* For next steps make sure to start from DRX_POWER_UP mode */ + if (state->m_currentPowerMode != DRX_POWER_UP) { + status = PowerUpDevice(state); + if (status < 0) + goto error; + status = DVBTEnableOFDMTokenRing(state, true); + if (status < 0) + goto error; + } + + if (*mode == DRX_POWER_UP) { + /* Restore analog & pin configuartion */ + } else { + /* Power down to requested mode */ + /* Backup some register settings */ + /* Set pins with possible pull-ups connected + to them in input mode */ + /* Analog power down */ + /* ADC power down */ + /* Power down device */ + /* stop all comm_exec */ + /* Stop and power down previous standard */ + switch (state->m_OperationMode) { + case OM_DVBT: + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = PowerDownDVBT(state, false); + if (status < 0) + goto error; + break; + case OM_QAM_ITU_A: + case OM_QAM_ITU_C: + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = PowerDownQAM(state); + if (status < 0) + goto error; + break; + default: + break; + } + status = DVBTEnableOFDMTokenRing(state, false); + if (status < 0) + goto error; + status = write16(state, SIO_CC_PWD_MODE__A, sioCcPwdMode); + if (status < 0) + goto error; + status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); + if (status < 0) + goto error; + + if (*mode != DRXK_POWER_DOWN_OFDM) { + state->m_HICfgCtrl |= + SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; + status = HI_CfgCommand(state); + if (status < 0) + goto error; + } + } + state->m_currentPowerMode = *mode; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode) +{ + enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; + u16 cmdResult = 0; + u16 data = 0; + int status; + + dprintk(1, "\n"); + + status = read16(state, SCU_COMM_EXEC__A, &data); + if (status < 0) + goto error; + if (data == SCU_COMM_EXEC_ACTIVE) { + /* Send OFDM stop command */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + /* Send OFDM reset command */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + } + + /* Reset datapath for OFDM, processors first */ + status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); + if (status < 0) + goto error; + + /* powerdown AFE */ + status = SetIqmAf(state, false); + if (status < 0) + goto error; + + /* powerdown to OFDM mode */ + if (setPowerMode) { + status = CtrlPowerMode(state, &powerMode); + if (status < 0) + goto error; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetOperationMode(struct drxk_state *state, + enum OperationMode oMode) +{ + int status = 0; + + dprintk(1, "\n"); + /* + Stop and power down previous standard + TODO investigate total power down instead of partial + power down depending on "previous" standard. + */ + + /* disable HW lock indicator */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + + /* Device is already at the required mode */ + if (state->m_OperationMode == oMode) + return 0; + + switch (state->m_OperationMode) { + /* OM_NONE was added for start up */ + case OM_NONE: + break; + case OM_DVBT: + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = PowerDownDVBT(state, true); + if (status < 0) + goto error; + state->m_OperationMode = OM_NONE; + break; + case OM_QAM_ITU_A: /* fallthrough */ + case OM_QAM_ITU_C: + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = PowerDownQAM(state); + if (status < 0) + goto error; + state->m_OperationMode = OM_NONE; + break; + case OM_QAM_ITU_B: + default: + status = -EINVAL; + goto error; + } + + /* + Power up new standard + */ + switch (oMode) { + case OM_DVBT: + dprintk(1, ": DVB-T\n"); + state->m_OperationMode = oMode; + status = SetDVBTStandard(state, oMode); + if (status < 0) + goto error; + break; + case OM_QAM_ITU_A: /* fallthrough */ + case OM_QAM_ITU_C: + dprintk(1, ": DVB-C Annex %c\n", + (state->m_OperationMode == OM_QAM_ITU_A) ? 'A' : 'C'); + state->m_OperationMode = oMode; + status = SetQAMStandard(state, oMode); + if (status < 0) + goto error; + break; + case OM_QAM_ITU_B: + default: + status = -EINVAL; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int Start(struct drxk_state *state, s32 offsetFreq, + s32 IntermediateFrequency) +{ + int status = -EINVAL; + + u16 IFreqkHz; + s32 OffsetkHz = offsetFreq / 1000; + + dprintk(1, "\n"); + if (state->m_DrxkState != DRXK_STOPPED && + state->m_DrxkState != DRXK_DTV_STARTED) + goto error; + + state->m_bMirrorFreqSpect = (state->props.inversion == INVERSION_ON); + + if (IntermediateFrequency < 0) { + state->m_bMirrorFreqSpect = !state->m_bMirrorFreqSpect; + IntermediateFrequency = -IntermediateFrequency; + } + + switch (state->m_OperationMode) { + case OM_QAM_ITU_A: + case OM_QAM_ITU_C: + IFreqkHz = (IntermediateFrequency / 1000); + status = SetQAM(state, IFreqkHz, OffsetkHz); + if (status < 0) + goto error; + state->m_DrxkState = DRXK_DTV_STARTED; + break; + case OM_DVBT: + IFreqkHz = (IntermediateFrequency / 1000); + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = SetDVBT(state, IFreqkHz, OffsetkHz); + if (status < 0) + goto error; + status = DVBTStart(state); + if (status < 0) + goto error; + state->m_DrxkState = DRXK_DTV_STARTED; + break; + default: + break; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int ShutDown(struct drxk_state *state) +{ + dprintk(1, "\n"); + + MPEGTSStop(state); + return 0; +} + +static int GetLockStatus(struct drxk_state *state, u32 *pLockStatus) +{ + int status = -EINVAL; + + dprintk(1, "\n"); + + if (pLockStatus == NULL) + goto error; + + *pLockStatus = NOT_LOCKED; + + /* define the SCU command code */ + switch (state->m_OperationMode) { + case OM_QAM_ITU_A: + case OM_QAM_ITU_B: + case OM_QAM_ITU_C: + status = GetQAMLockStatus(state, pLockStatus); + break; + case OM_DVBT: + status = GetDVBTLockStatus(state, pLockStatus); + break; + default: + break; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int MPEGTSStart(struct drxk_state *state) +{ + int status; + + u16 fecOcSncMode = 0; + + /* Allow OC to sync again */ + status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode); + if (status < 0) + goto error; + fecOcSncMode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M; + status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode); + if (status < 0) + goto error; + status = write16(state, FEC_OC_SNC_UNLOCK__A, 1); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int MPEGTSDtoInit(struct drxk_state *state) +{ + int status; + + dprintk(1, "\n"); + + /* Rate integration settings */ + status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C); + if (status < 0) + goto error; + status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A); + if (status < 0) + goto error; + status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008); + if (status < 0) + goto error; + status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4); + if (status < 0) + goto error; + + /* Additional configuration */ + status = write16(state, FEC_OC_OCR_INVERT__A, 0); + if (status < 0) + goto error; + status = write16(state, FEC_OC_SNC_LWM__A, 2); + if (status < 0) + goto error; + status = write16(state, FEC_OC_SNC_HWM__A, 12); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int MPEGTSDtoSetup(struct drxk_state *state, + enum OperationMode oMode) +{ + int status; + + u16 fecOcRegMode = 0; /* FEC_OC_MODE register value */ + u16 fecOcRegIprMode = 0; /* FEC_OC_IPR_MODE register value */ + u16 fecOcDtoMode = 0; /* FEC_OC_IPR_INVERT register value */ + u16 fecOcFctMode = 0; /* FEC_OC_IPR_INVERT register value */ + u16 fecOcDtoPeriod = 2; /* FEC_OC_IPR_INVERT register value */ + u16 fecOcDtoBurstLen = 188; /* FEC_OC_IPR_INVERT register value */ + u32 fecOcRcnCtlRate = 0; /* FEC_OC_IPR_INVERT register value */ + u16 fecOcTmdMode = 0; + u16 fecOcTmdIntUpdRate = 0; + u32 maxBitRate = 0; + bool staticCLK = false; + + dprintk(1, "\n"); + + /* Check insertion of the Reed-Solomon parity bytes */ + status = read16(state, FEC_OC_MODE__A, &fecOcRegMode); + if (status < 0) + goto error; + status = read16(state, FEC_OC_IPR_MODE__A, &fecOcRegIprMode); + if (status < 0) + goto error; + fecOcRegMode &= (~FEC_OC_MODE_PARITY__M); + fecOcRegIprMode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M); + if (state->m_insertRSByte == true) { + /* enable parity symbol forward */ + fecOcRegMode |= FEC_OC_MODE_PARITY__M; + /* MVAL disable during parity bytes */ + fecOcRegIprMode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M; + /* TS burst length to 204 */ + fecOcDtoBurstLen = 204; + } + + /* Check serial or parrallel output */ + fecOcRegIprMode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); + if (state->m_enableParallel == false) { + /* MPEG data output is serial -> set ipr_mode[0] */ + fecOcRegIprMode |= FEC_OC_IPR_MODE_SERIAL__M; + } + + switch (oMode) { + case OM_DVBT: + maxBitRate = state->m_DVBTBitrate; + fecOcTmdMode = 3; + fecOcRcnCtlRate = 0xC00000; + staticCLK = state->m_DVBTStaticCLK; + break; + case OM_QAM_ITU_A: /* fallthrough */ + case OM_QAM_ITU_C: + fecOcTmdMode = 0x0004; + fecOcRcnCtlRate = 0xD2B4EE; /* good for >63 Mb/s */ + maxBitRate = state->m_DVBCBitrate; + staticCLK = state->m_DVBCStaticCLK; + break; + default: + status = -EINVAL; + } /* switch (standard) */ + if (status < 0) + goto error; + + /* Configure DTO's */ + if (staticCLK) { + u32 bitRate = 0; + + /* Rational DTO for MCLK source (static MCLK rate), + Dynamic DTO for optimal grouping + (avoid intra-packet gaps), + DTO offset enable to sync TS burst with MSTRT */ + fecOcDtoMode = (FEC_OC_DTO_MODE_DYNAMIC__M | + FEC_OC_DTO_MODE_OFFSET_ENABLE__M); + fecOcFctMode = (FEC_OC_FCT_MODE_RAT_ENA__M | + FEC_OC_FCT_MODE_VIRT_ENA__M); + + /* Check user defined bitrate */ + bitRate = maxBitRate; + if (bitRate > 75900000UL) { /* max is 75.9 Mb/s */ + bitRate = 75900000UL; + } + /* Rational DTO period: + dto_period = (Fsys / bitrate) - 2 + + Result should be floored, + to make sure >= requested bitrate + */ + fecOcDtoPeriod = (u16) (((state->m_sysClockFreq) + * 1000) / bitRate); + if (fecOcDtoPeriod <= 2) + fecOcDtoPeriod = 0; + else + fecOcDtoPeriod -= 2; + fecOcTmdIntUpdRate = 8; + } else { + /* (commonAttr->staticCLK == false) => dynamic mode */ + fecOcDtoMode = FEC_OC_DTO_MODE_DYNAMIC__M; + fecOcFctMode = FEC_OC_FCT_MODE__PRE; + fecOcTmdIntUpdRate = 5; + } + + /* Write appropriate registers with requested configuration */ + status = write16(state, FEC_OC_DTO_BURST_LEN__A, fecOcDtoBurstLen); + if (status < 0) + goto error; + status = write16(state, FEC_OC_DTO_PERIOD__A, fecOcDtoPeriod); + if (status < 0) + goto error; + status = write16(state, FEC_OC_DTO_MODE__A, fecOcDtoMode); + if (status < 0) + goto error; + status = write16(state, FEC_OC_FCT_MODE__A, fecOcFctMode); + if (status < 0) + goto error; + status = write16(state, FEC_OC_MODE__A, fecOcRegMode); + if (status < 0) + goto error; + status = write16(state, FEC_OC_IPR_MODE__A, fecOcRegIprMode); + if (status < 0) + goto error; + + /* Rate integration settings */ + status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fecOcRcnCtlRate); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A, fecOcTmdIntUpdRate); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_MODE__A, fecOcTmdMode); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int MPEGTSConfigurePolarity(struct drxk_state *state) +{ + u16 fecOcRegIprInvert = 0; + + /* Data mask for the output data byte */ + u16 InvertDataMask = + FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M | + FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M | + FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M | + FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M; + + dprintk(1, "\n"); + + /* Control selective inversion of output bits */ + fecOcRegIprInvert &= (~(InvertDataMask)); + if (state->m_invertDATA == true) + fecOcRegIprInvert |= InvertDataMask; + fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MERR__M)); + if (state->m_invertERR == true) + fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MERR__M; + fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MSTRT__M)); + if (state->m_invertSTR == true) + fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MSTRT__M; + fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MVAL__M)); + if (state->m_invertVAL == true) + fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MVAL__M; + fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MCLK__M)); + if (state->m_invertCLK == true) + fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MCLK__M; + + return write16(state, FEC_OC_IPR_INVERT__A, fecOcRegIprInvert); +} + +#define SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000 + +static int SetAgcRf(struct drxk_state *state, + struct SCfgAgc *pAgcCfg, bool isDTV) +{ + int status = -EINVAL; + u16 data = 0; + struct SCfgAgc *pIfAgcSettings; + + dprintk(1, "\n"); + + if (pAgcCfg == NULL) + goto error; + + switch (pAgcCfg->ctrlMode) { + case DRXK_AGC_CTRL_AUTO: + /* Enable RF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + + /* Enable SCU RF AGC loop */ + data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; + + /* Polarity */ + if (state->m_RfAgcPol) + data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; + else + data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + + /* Set speed (using complementary reduction value) */ + status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); + if (status < 0) + goto error; + + data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M; + data |= (~(pAgcCfg->speed << + SCU_RAM_AGC_KI_RED_RAGC_RED__B) + & SCU_RAM_AGC_KI_RED_RAGC_RED__M); + + status = write16(state, SCU_RAM_AGC_KI_RED__A, data); + if (status < 0) + goto error; + + if (IsDVBT(state)) + pIfAgcSettings = &state->m_dvbtIfAgcCfg; + else if (IsQAM(state)) + pIfAgcSettings = &state->m_qamIfAgcCfg; + else + pIfAgcSettings = &state->m_atvIfAgcCfg; + if (pIfAgcSettings == NULL) { + status = -EINVAL; + goto error; + } + + /* Set TOP, only if IF-AGC is in AUTO mode */ + if (pIfAgcSettings->ctrlMode == DRXK_AGC_CTRL_AUTO) + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->top); + if (status < 0) + goto error; + + /* Cut-Off current */ + status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, pAgcCfg->cutOffCurrent); + if (status < 0) + goto error; + + /* Max. output level */ + status = write16(state, SCU_RAM_AGC_RF_MAX__A, pAgcCfg->maxOutputLevel); + if (status < 0) + goto error; + + break; + + case DRXK_AGC_CTRL_USER: + /* Enable RF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + /* Disable SCU RF AGC loop */ + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; + if (state->m_RfAgcPol) + data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; + else + data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + + /* SCU c.o.c. to 0, enabling full control range */ + status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0); + if (status < 0) + goto error; + + /* Write value to output pin */ + status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, pAgcCfg->outputLevel); + if (status < 0) + goto error; + break; + + case DRXK_AGC_CTRL_OFF: + /* Disable RF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + /* Disable SCU RF AGC loop */ + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + break; + + default: + status = -EINVAL; + + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +#define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000 + +static int SetAgcIf(struct drxk_state *state, + struct SCfgAgc *pAgcCfg, bool isDTV) +{ + u16 data = 0; + int status = 0; + struct SCfgAgc *pRfAgcSettings; + + dprintk(1, "\n"); + + switch (pAgcCfg->ctrlMode) { + case DRXK_AGC_CTRL_AUTO: + + /* Enable IF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + + /* Enable SCU IF AGC loop */ + data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; + + /* Polarity */ + if (state->m_IfAgcPol) + data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; + else + data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + + /* Set speed (using complementary reduction value) */ + status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); + if (status < 0) + goto error; + data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M; + data |= (~(pAgcCfg->speed << + SCU_RAM_AGC_KI_RED_IAGC_RED__B) + & SCU_RAM_AGC_KI_RED_IAGC_RED__M); + + status = write16(state, SCU_RAM_AGC_KI_RED__A, data); + if (status < 0) + goto error; + + if (IsQAM(state)) + pRfAgcSettings = &state->m_qamRfAgcCfg; + else + pRfAgcSettings = &state->m_atvRfAgcCfg; + if (pRfAgcSettings == NULL) + return -1; + /* Restore TOP */ + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pRfAgcSettings->top); + if (status < 0) + goto error; + break; + + case DRXK_AGC_CTRL_USER: + + /* Enable IF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + + /* Disable SCU IF AGC loop */ + data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; + + /* Polarity */ + if (state->m_IfAgcPol) + data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; + else + data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + + /* Write value to output pin */ + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->outputLevel); + if (status < 0) + goto error; + break; + + case DRXK_AGC_CTRL_OFF: + + /* Disable If AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + /* Disable SCU IF AGC loop */ + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + break; + } /* switch (agcSettingsIf->ctrlMode) */ + + /* always set the top to support + configurations without if-loop */ + status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, pAgcCfg->top); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int GetQAMSignalToNoise(struct drxk_state *state, + s32 *pSignalToNoise) +{ + int status = 0; + u16 qamSlErrPower = 0; /* accum. error between + raw and sliced symbols */ + u32 qamSlSigPower = 0; /* used for MER, depends of + QAM modulation */ + u32 qamSlMer = 0; /* QAM MER */ + + dprintk(1, "\n"); + + /* MER calculation */ + + /* get the register value needed for MER */ + status = read16(state, QAM_SL_ERR_POWER__A, &qamSlErrPower); + if (status < 0) { + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return -EINVAL; + } + + switch (state->props.modulation) { + case QAM_16: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM16 << 2; + break; + case QAM_32: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM32 << 2; + break; + case QAM_64: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM64 << 2; + break; + case QAM_128: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM128 << 2; + break; + default: + case QAM_256: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM256 << 2; + break; + } + + if (qamSlErrPower > 0) { + qamSlMer = Log10Times100(qamSlSigPower) - + Log10Times100((u32) qamSlErrPower); + } + *pSignalToNoise = qamSlMer; + + return status; +} + +static int GetDVBTSignalToNoise(struct drxk_state *state, + s32 *pSignalToNoise) +{ + int status; + u16 regData = 0; + u32 EqRegTdSqrErrI = 0; + u32 EqRegTdSqrErrQ = 0; + u16 EqRegTdSqrErrExp = 0; + u16 EqRegTdTpsPwrOfs = 0; + u16 EqRegTdReqSmbCnt = 0; + u32 tpsCnt = 0; + u32 SqrErrIQ = 0; + u32 a = 0; + u32 b = 0; + u32 c = 0; + u32 iMER = 0; + u16 transmissionParams = 0; + + dprintk(1, "\n"); + + status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A, &EqRegTdTpsPwrOfs); + if (status < 0) + goto error; + status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A, &EqRegTdReqSmbCnt); + if (status < 0) + goto error; + status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A, &EqRegTdSqrErrExp); + if (status < 0) + goto error; + status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A, ®Data); + if (status < 0) + goto error; + /* Extend SQR_ERR_I operational range */ + EqRegTdSqrErrI = (u32) regData; + if ((EqRegTdSqrErrExp > 11) && + (EqRegTdSqrErrI < 0x00000FFFUL)) { + EqRegTdSqrErrI += 0x00010000UL; + } + status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, ®Data); + if (status < 0) + goto error; + /* Extend SQR_ERR_Q operational range */ + EqRegTdSqrErrQ = (u32) regData; + if ((EqRegTdSqrErrExp > 11) && + (EqRegTdSqrErrQ < 0x00000FFFUL)) + EqRegTdSqrErrQ += 0x00010000UL; + + status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A, &transmissionParams); + if (status < 0) + goto error; + + /* Check input data for MER */ + + /* MER calculation (in 0.1 dB) without math.h */ + if ((EqRegTdTpsPwrOfs == 0) || (EqRegTdReqSmbCnt == 0)) + iMER = 0; + else if ((EqRegTdSqrErrI + EqRegTdSqrErrQ) == 0) { + /* No error at all, this must be the HW reset value + * Apparently no first measurement yet + * Set MER to 0.0 */ + iMER = 0; + } else { + SqrErrIQ = (EqRegTdSqrErrI + EqRegTdSqrErrQ) << + EqRegTdSqrErrExp; + if ((transmissionParams & + OFDM_SC_RA_RAM_OP_PARAM_MODE__M) + == OFDM_SC_RA_RAM_OP_PARAM_MODE_2K) + tpsCnt = 17; + else + tpsCnt = 68; + + /* IMER = 100 * log10 (x) + where x = (EqRegTdTpsPwrOfs^2 * + EqRegTdReqSmbCnt * tpsCnt)/SqrErrIQ + + => IMER = a + b -c + where a = 100 * log10 (EqRegTdTpsPwrOfs^2) + b = 100 * log10 (EqRegTdReqSmbCnt * tpsCnt) + c = 100 * log10 (SqrErrIQ) + */ + + /* log(x) x = 9bits * 9bits->18 bits */ + a = Log10Times100(EqRegTdTpsPwrOfs * + EqRegTdTpsPwrOfs); + /* log(x) x = 16bits * 7bits->23 bits */ + b = Log10Times100(EqRegTdReqSmbCnt * tpsCnt); + /* log(x) x = (16bits + 16bits) << 15 ->32 bits */ + c = Log10Times100(SqrErrIQ); + + iMER = a + b - c; + } + *pSignalToNoise = iMER; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int GetSignalToNoise(struct drxk_state *state, s32 *pSignalToNoise) +{ + dprintk(1, "\n"); + + *pSignalToNoise = 0; + switch (state->m_OperationMode) { + case OM_DVBT: + return GetDVBTSignalToNoise(state, pSignalToNoise); + case OM_QAM_ITU_A: + case OM_QAM_ITU_C: + return GetQAMSignalToNoise(state, pSignalToNoise); + default: + break; + } + return 0; +} + +#if 0 +static int GetDVBTQuality(struct drxk_state *state, s32 *pQuality) +{ + /* SNR Values for quasi errorfree reception rom Nordig 2.2 */ + int status = 0; + + dprintk(1, "\n"); + + static s32 QE_SN[] = { + 51, /* QPSK 1/2 */ + 69, /* QPSK 2/3 */ + 79, /* QPSK 3/4 */ + 89, /* QPSK 5/6 */ + 97, /* QPSK 7/8 */ + 108, /* 16-QAM 1/2 */ + 131, /* 16-QAM 2/3 */ + 146, /* 16-QAM 3/4 */ + 156, /* 16-QAM 5/6 */ + 160, /* 16-QAM 7/8 */ + 165, /* 64-QAM 1/2 */ + 187, /* 64-QAM 2/3 */ + 202, /* 64-QAM 3/4 */ + 216, /* 64-QAM 5/6 */ + 225, /* 64-QAM 7/8 */ + }; + + *pQuality = 0; + + do { + s32 SignalToNoise = 0; + u16 Constellation = 0; + u16 CodeRate = 0; + u32 SignalToNoiseRel; + u32 BERQuality; + + status = GetDVBTSignalToNoise(state, &SignalToNoise); + if (status < 0) + break; + status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A, &Constellation); + if (status < 0) + break; + Constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M; + + status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A, &CodeRate); + if (status < 0) + break; + CodeRate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M; + + if (Constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM || + CodeRate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8) + break; + SignalToNoiseRel = SignalToNoise - + QE_SN[Constellation * 5 + CodeRate]; + BERQuality = 100; + + if (SignalToNoiseRel < -70) + *pQuality = 0; + else if (SignalToNoiseRel < 30) + *pQuality = ((SignalToNoiseRel + 70) * + BERQuality) / 100; + else + *pQuality = BERQuality; + } while (0); + return 0; +}; + +static int GetDVBCQuality(struct drxk_state *state, s32 *pQuality) +{ + int status = 0; + *pQuality = 0; + + dprintk(1, "\n"); + + do { + u32 SignalToNoise = 0; + u32 BERQuality = 100; + u32 SignalToNoiseRel = 0; + + status = GetQAMSignalToNoise(state, &SignalToNoise); + if (status < 0) + break; + + switch (state->props.modulation) { + case QAM_16: + SignalToNoiseRel = SignalToNoise - 200; + break; + case QAM_32: + SignalToNoiseRel = SignalToNoise - 230; + break; /* Not in NorDig */ + case QAM_64: + SignalToNoiseRel = SignalToNoise - 260; + break; + case QAM_128: + SignalToNoiseRel = SignalToNoise - 290; + break; + default: + case QAM_256: + SignalToNoiseRel = SignalToNoise - 320; + break; + } + + if (SignalToNoiseRel < -70) + *pQuality = 0; + else if (SignalToNoiseRel < 30) + *pQuality = ((SignalToNoiseRel + 70) * + BERQuality) / 100; + else + *pQuality = BERQuality; + } while (0); + + return status; +} + +static int GetQuality(struct drxk_state *state, s32 *pQuality) +{ + dprintk(1, "\n"); + + switch (state->m_OperationMode) { + case OM_DVBT: + return GetDVBTQuality(state, pQuality); + case OM_QAM_ITU_A: + return GetDVBCQuality(state, pQuality); + default: + break; + } + + return 0; +} +#endif + +/* Free data ram in SIO HI */ +#define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040 +#define SIO_HI_RA_RAM_USR_END__A 0x420060 + +#define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A) +#define DRXK_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7) +#define DRXK_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ +#define DRXK_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE + +#define DRXDAP_FASI_ADDR2BLOCK(addr) (((addr) >> 22) & 0x3F) +#define DRXDAP_FASI_ADDR2BANK(addr) (((addr) >> 16) & 0x3F) +#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF) + +static int ConfigureI2CBridge(struct drxk_state *state, bool bEnableBridge) +{ + int status = -EINVAL; + + dprintk(1, "\n"); + + if (state->m_DrxkState == DRXK_UNINITIALIZED) + return 0; + if (state->m_DrxkState == DRXK_POWERED_DOWN) + goto error; + + if (state->no_i2c_bridge) + return 0; + + status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); + if (status < 0) + goto error; + if (bEnableBridge) { + status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED); + if (status < 0) + goto error; + } else { + status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN); + if (status < 0) + goto error; + } + + status = HI_Command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, 0); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetPreSaw(struct drxk_state *state, + struct SCfgPreSaw *pPreSawCfg) +{ + int status = -EINVAL; + + dprintk(1, "\n"); + + if ((pPreSawCfg == NULL) + || (pPreSawCfg->reference > IQM_AF_PDREF__M)) + goto error; + + status = write16(state, IQM_AF_PDREF__A, pPreSawCfg->reference); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int BLDirectCmd(struct drxk_state *state, u32 targetAddr, + u16 romOffset, u16 nrOfElements, u32 timeOut) +{ + u16 blStatus = 0; + u16 offset = (u16) ((targetAddr >> 0) & 0x00FFFF); + u16 blockbank = (u16) ((targetAddr >> 16) & 0x000FFF); + int status; + unsigned long end; + + dprintk(1, "\n"); + + mutex_lock(&state->mutex); + status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT); + if (status < 0) + goto error; + status = write16(state, SIO_BL_TGT_HDR__A, blockbank); + if (status < 0) + goto error; + status = write16(state, SIO_BL_TGT_ADDR__A, offset); + if (status < 0) + goto error; + status = write16(state, SIO_BL_SRC_ADDR__A, romOffset); + if (status < 0) + goto error; + status = write16(state, SIO_BL_SRC_LEN__A, nrOfElements); + if (status < 0) + goto error; + status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); + if (status < 0) + goto error; + + end = jiffies + msecs_to_jiffies(timeOut); + do { + status = read16(state, SIO_BL_STATUS__A, &blStatus); + if (status < 0) + goto error; + } while ((blStatus == 0x1) && time_is_after_jiffies(end)); + if (blStatus == 0x1) { + printk(KERN_ERR "drxk: SIO not ready\n"); + status = -EINVAL; + goto error2; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); +error2: + mutex_unlock(&state->mutex); + return status; + +} + +static int ADCSyncMeasurement(struct drxk_state *state, u16 *count) +{ + u16 data = 0; + int status; + + dprintk(1, "\n"); + + /* Start measurement */ + status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = write16(state, IQM_AF_START_LOCK__A, 1); + if (status < 0) + goto error; + + *count = 0; + status = read16(state, IQM_AF_PHASE0__A, &data); + if (status < 0) + goto error; + if (data == 127) + *count = *count + 1; + status = read16(state, IQM_AF_PHASE1__A, &data); + if (status < 0) + goto error; + if (data == 127) + *count = *count + 1; + status = read16(state, IQM_AF_PHASE2__A, &data); + if (status < 0) + goto error; + if (data == 127) + *count = *count + 1; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int ADCSynchronization(struct drxk_state *state) +{ + u16 count = 0; + int status; + + dprintk(1, "\n"); + + status = ADCSyncMeasurement(state, &count); + if (status < 0) + goto error; + + if (count == 1) { + /* Try sampling on a diffrent edge */ + u16 clkNeg = 0; + + status = read16(state, IQM_AF_CLKNEG__A, &clkNeg); + if (status < 0) + goto error; + if ((clkNeg & IQM_AF_CLKNEG_CLKNEGDATA__M) == + IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) { + clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); + clkNeg |= + IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG; + } else { + clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); + clkNeg |= + IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS; + } + status = write16(state, IQM_AF_CLKNEG__A, clkNeg); + if (status < 0) + goto error; + status = ADCSyncMeasurement(state, &count); + if (status < 0) + goto error; + } + + if (count < 2) + status = -EINVAL; +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetFrequencyShifter(struct drxk_state *state, + u16 intermediateFreqkHz, + s32 tunerFreqOffset, bool isDTV) +{ + bool selectPosImage = false; + u32 rfFreqResidual = tunerFreqOffset; + u32 fmFrequencyShift = 0; + bool tunerMirror = !state->m_bMirrorFreqSpect; + u32 adcFreq; + bool adcFlip; + int status; + u32 ifFreqActual; + u32 samplingFrequency = (u32) (state->m_sysClockFreq / 3); + u32 frequencyShift; + bool imageToSelect; + + dprintk(1, "\n"); + + /* + Program frequency shifter + No need to account for mirroring on RF + */ + if (isDTV) { + if ((state->m_OperationMode == OM_QAM_ITU_A) || + (state->m_OperationMode == OM_QAM_ITU_C) || + (state->m_OperationMode == OM_DVBT)) + selectPosImage = true; + else + selectPosImage = false; + } + if (tunerMirror) + /* tuner doesn't mirror */ + ifFreqActual = intermediateFreqkHz + + rfFreqResidual + fmFrequencyShift; + else + /* tuner mirrors */ + ifFreqActual = intermediateFreqkHz - + rfFreqResidual - fmFrequencyShift; + if (ifFreqActual > samplingFrequency / 2) { + /* adc mirrors */ + adcFreq = samplingFrequency - ifFreqActual; + adcFlip = true; + } else { + /* adc doesn't mirror */ + adcFreq = ifFreqActual; + adcFlip = false; + } + + frequencyShift = adcFreq; + imageToSelect = state->m_rfmirror ^ tunerMirror ^ + adcFlip ^ selectPosImage; + state->m_IqmFsRateOfs = + Frac28a((frequencyShift), samplingFrequency); + + if (imageToSelect) + state->m_IqmFsRateOfs = ~state->m_IqmFsRateOfs + 1; + + /* Program frequency shifter with tuner offset compensation */ + /* frequencyShift += tunerFreqOffset; TODO */ + status = write32(state, IQM_FS_RATE_OFS_LO__A, + state->m_IqmFsRateOfs); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int InitAGC(struct drxk_state *state, bool isDTV) +{ + u16 ingainTgt = 0; + u16 ingainTgtMin = 0; + u16 ingainTgtMax = 0; + u16 clpCyclen = 0; + u16 clpSumMin = 0; + u16 clpDirTo = 0; + u16 snsSumMin = 0; + u16 snsSumMax = 0; + u16 clpSumMax = 0; + u16 snsDirTo = 0; + u16 kiInnergainMin = 0; + u16 ifIaccuHiTgt = 0; + u16 ifIaccuHiTgtMin = 0; + u16 ifIaccuHiTgtMax = 0; + u16 data = 0; + u16 fastClpCtrlDelay = 0; + u16 clpCtrlMode = 0; + int status = 0; + + dprintk(1, "\n"); + + /* Common settings */ + snsSumMax = 1023; + ifIaccuHiTgtMin = 2047; + clpCyclen = 500; + clpSumMax = 1023; + + /* AGCInit() not available for DVBT; init done in microcode */ + if (!IsQAM(state)) { + printk(KERN_ERR "drxk: %s: mode %d is not DVB-C\n", __func__, state->m_OperationMode); + return -EINVAL; + } + + /* FIXME: Analog TV AGC require different settings */ + + /* Standard specific settings */ + clpSumMin = 8; + clpDirTo = (u16) -9; + clpCtrlMode = 0; + snsSumMin = 8; + snsDirTo = (u16) -9; + kiInnergainMin = (u16) -1030; + ifIaccuHiTgtMax = 0x2380; + ifIaccuHiTgt = 0x2380; + ingainTgtMin = 0x0511; + ingainTgt = 0x0511; + ingainTgtMax = 5119; + fastClpCtrlDelay = state->m_qamIfAgcCfg.FastClipCtrlDelay; + + status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, fastClpCtrlDelay); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clpCtrlMode); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingainTgt); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingainTgtMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingainTgtMax); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, ifIaccuHiTgtMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, ifIaccuHiTgtMax); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clpSumMax); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, snsSumMax); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, kiInnergainMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, ifIaccuHiTgt); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clpCyclen); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clpSumMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, snsSumMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clpDirTo); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, snsDirTo); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500); + if (status < 0) + goto error; + + /* Initialize inner-loop KI gain factors */ + status = read16(state, SCU_RAM_AGC_KI__A, &data); + if (status < 0) + goto error; + + data = 0x0657; + data &= ~SCU_RAM_AGC_KI_RF__M; + data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B); + data &= ~SCU_RAM_AGC_KI_IF__M; + data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B); + + status = write16(state, SCU_RAM_AGC_KI__A, data); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int DVBTQAMGetAccPktErr(struct drxk_state *state, u16 *packetErr) +{ + int status; + + dprintk(1, "\n"); + if (packetErr == NULL) + status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0); + else + status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, packetErr); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int DVBTScCommand(struct drxk_state *state, + u16 cmd, u16 subcmd, + u16 param0, u16 param1, u16 param2, + u16 param3, u16 param4) +{ + u16 curCmd = 0; + u16 errCode = 0; + u16 retryCnt = 0; + u16 scExec = 0; + int status; + + dprintk(1, "\n"); + status = read16(state, OFDM_SC_COMM_EXEC__A, &scExec); + if (scExec != 1) { + /* SC is not running */ + status = -EINVAL; + } + if (status < 0) + goto error; + + /* Wait until sc is ready to receive command */ + retryCnt = 0; + do { + msleep(1); + status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd); + retryCnt++; + } while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES)); + if (retryCnt >= DRXK_MAX_RETRIES && (status < 0)) + goto error; + + /* Write sub-command */ + switch (cmd) { + /* All commands using sub-cmd */ + case OFDM_SC_RA_RAM_CMD_PROC_START: + case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: + case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: + status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd); + if (status < 0) + goto error; + break; + default: + /* Do nothing */ + break; + } + + /* Write needed parameters and the command */ + switch (cmd) { + /* All commands using 5 parameters */ + /* All commands using 4 parameters */ + /* All commands using 3 parameters */ + /* All commands using 2 parameters */ + case OFDM_SC_RA_RAM_CMD_PROC_START: + case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: + case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: + status = write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1); + /* All commands using 1 parameters */ + case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING: + case OFDM_SC_RA_RAM_CMD_USER_IO: + status = write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0); + /* All commands using 0 parameters */ + case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM: + case OFDM_SC_RA_RAM_CMD_NULL: + /* Write command */ + status = write16(state, OFDM_SC_RA_RAM_CMD__A, cmd); + break; + default: + /* Unknown command */ + status = -EINVAL; + } + if (status < 0) + goto error; + + /* Wait until sc is ready processing command */ + retryCnt = 0; + do { + msleep(1); + status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd); + retryCnt++; + } while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES)); + if (retryCnt >= DRXK_MAX_RETRIES && (status < 0)) + goto error; + + /* Check for illegal cmd */ + status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &errCode); + if (errCode == 0xFFFF) { + /* illegal command */ + status = -EINVAL; + } + if (status < 0) + goto error; + + /* Retreive results parameters from SC */ + switch (cmd) { + /* All commands yielding 5 results */ + /* All commands yielding 4 results */ + /* All commands yielding 3 results */ + /* All commands yielding 2 results */ + /* All commands yielding 1 result */ + case OFDM_SC_RA_RAM_CMD_USER_IO: + case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM: + status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0)); + /* All commands yielding 0 results */ + case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING: + case OFDM_SC_RA_RAM_CMD_SET_TIMER: + case OFDM_SC_RA_RAM_CMD_PROC_START: + case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: + case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: + case OFDM_SC_RA_RAM_CMD_NULL: + break; + default: + /* Unknown command */ + status = -EINVAL; + break; + } /* switch (cmd->cmd) */ +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int PowerUpDVBT(struct drxk_state *state) +{ + enum DRXPowerMode powerMode = DRX_POWER_UP; + int status; + + dprintk(1, "\n"); + status = CtrlPowerMode(state, &powerMode); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int DVBTCtrlSetIncEnable(struct drxk_state *state, bool *enabled) +{ + int status; + + dprintk(1, "\n"); + if (*enabled == true) + status = write16(state, IQM_CF_BYPASSDET__A, 0); + else + status = write16(state, IQM_CF_BYPASSDET__A, 1); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +#define DEFAULT_FR_THRES_8K 4000 +static int DVBTCtrlSetFrEnable(struct drxk_state *state, bool *enabled) +{ + + int status; + + dprintk(1, "\n"); + if (*enabled == true) { + /* write mask to 1 */ + status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, + DEFAULT_FR_THRES_8K); + } else { + /* write mask to 0 */ + status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0); + } + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int DVBTCtrlSetEchoThreshold(struct drxk_state *state, + struct DRXKCfgDvbtEchoThres_t *echoThres) +{ + u16 data = 0; + int status; + + dprintk(1, "\n"); + status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data); + if (status < 0) + goto error; + + switch (echoThres->fftMode) { + case DRX_FFTMODE_2K: + data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M; + data |= ((echoThres->threshold << + OFDM_SC_RA_RAM_ECHO_THRES_2K__B) + & (OFDM_SC_RA_RAM_ECHO_THRES_2K__M)); + break; + case DRX_FFTMODE_8K: + data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M; + data |= ((echoThres->threshold << + OFDM_SC_RA_RAM_ECHO_THRES_8K__B) + & (OFDM_SC_RA_RAM_ECHO_THRES_8K__M)); + break; + default: + return -EINVAL; + } + + status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int DVBTCtrlSetSqiSpeed(struct drxk_state *state, + enum DRXKCfgDvbtSqiSpeed *speed) +{ + int status = -EINVAL; + + dprintk(1, "\n"); + + switch (*speed) { + case DRXK_DVBT_SQI_SPEED_FAST: + case DRXK_DVBT_SQI_SPEED_MEDIUM: + case DRXK_DVBT_SQI_SPEED_SLOW: + break; + default: + goto error; + } + status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A, + (u16) *speed); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief Activate DVBT specific presets +* \param demod instance of demodulator. +* \return DRXStatus_t. +* +* Called in DVBTSetStandard +* +*/ +static int DVBTActivatePresets(struct drxk_state *state) +{ + int status; + bool setincenable = false; + bool setfrenable = true; + + struct DRXKCfgDvbtEchoThres_t echoThres2k = { 0, DRX_FFTMODE_2K }; + struct DRXKCfgDvbtEchoThres_t echoThres8k = { 0, DRX_FFTMODE_8K }; + + dprintk(1, "\n"); + status = DVBTCtrlSetIncEnable(state, &setincenable); + if (status < 0) + goto error; + status = DVBTCtrlSetFrEnable(state, &setfrenable); + if (status < 0) + goto error; + status = DVBTCtrlSetEchoThreshold(state, &echoThres2k); + if (status < 0) + goto error; + status = DVBTCtrlSetEchoThreshold(state, &echoThres8k); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, state->m_dvbtIfAgcCfg.IngainTgtMax); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief Initialize channelswitch-independent settings for DVBT. +* \param demod instance of demodulator. +* \return DRXStatus_t. +* +* For ROM code channel filter taps are loaded from the bootloader. For microcode +* the DVB-T taps from the drxk_filters.h are used. +*/ +static int SetDVBTStandard(struct drxk_state *state, + enum OperationMode oMode) +{ + u16 cmdResult = 0; + u16 data = 0; + int status; + + dprintk(1, "\n"); + + PowerUpDVBT(state); + /* added antenna switch */ + SwitchAntennaToDVBT(state); + /* send OFDM reset command */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* send OFDM setenv command */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* reset datapath for OFDM, processors first */ + status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); + if (status < 0) + goto error; + + /* IQM setup */ + /* synchronize on ofdstate->m_festart */ + status = write16(state, IQM_AF_UPD_SEL__A, 1); + if (status < 0) + goto error; + /* window size for clipping ADC detection */ + status = write16(state, IQM_AF_CLP_LEN__A, 0); + if (status < 0) + goto error; + /* window size for for sense pre-SAW detection */ + status = write16(state, IQM_AF_SNS_LEN__A, 0); + if (status < 0) + goto error; + /* sense threshold for sense pre-SAW detection */ + status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC); + if (status < 0) + goto error; + status = SetIqmAf(state, true); + if (status < 0) + goto error; + + status = write16(state, IQM_AF_AGC_RF__A, 0); + if (status < 0) + goto error; + + /* Impulse noise cruncher setup */ + status = write16(state, IQM_AF_INC_LCT__A, 0); /* crunch in IQM_CF */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_DET_LCT__A, 0); /* detect in IQM_CF */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_WND_LEN__A, 3); /* peak detector window length */ + if (status < 0) + goto error; + + status = write16(state, IQM_RC_STRETCH__A, 16); + if (status < 0) + goto error; + status = write16(state, IQM_CF_OUT_ENA__A, 0x4); /* enable output 2 */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_DS_ENA__A, 0x4); /* decimate output 2 */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_SCALE__A, 1600); + if (status < 0) + goto error; + status = write16(state, IQM_CF_SCALE_SH__A, 0); + if (status < 0) + goto error; + + /* virtual clipping threshold for clipping ADC detection */ + status = write16(state, IQM_AF_CLP_TH__A, 448); + if (status < 0) + goto error; + status = write16(state, IQM_CF_DATATH__A, 495); /* crunching threshold */ + if (status < 0) + goto error; + + status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); + if (status < 0) + goto error; + + status = write16(state, IQM_CF_PKDTH__A, 2); /* peak detector threshold */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2); + if (status < 0) + goto error; + /* enable power measurement interrupt */ + status = write16(state, IQM_CF_COMM_INT_MSK__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE); + if (status < 0) + goto error; + + /* IQM will not be reset from here, sync ADC and update/init AGC */ + status = ADCSynchronization(state); + if (status < 0) + goto error; + status = SetPreSaw(state, &state->m_dvbtPreSawCfg); + if (status < 0) + goto error; + + /* Halt SCU to enable safe non-atomic accesses */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); + if (status < 0) + goto error; + + status = SetAgcRf(state, &state->m_dvbtRfAgcCfg, true); + if (status < 0) + goto error; + status = SetAgcIf(state, &state->m_dvbtIfAgcCfg, true); + if (status < 0) + goto error; + + /* Set Noise Estimation notch width and enable DC fix */ + status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data); + if (status < 0) + goto error; + data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M; + status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data); + if (status < 0) + goto error; + + /* Activate SCU to enable SCU commands */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + + if (!state->m_DRXK_A3_ROM_CODE) { + /* AGCInit() is not done for DVBT, so set agcFastClipCtrlDelay */ + status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, state->m_dvbtIfAgcCfg.FastClipCtrlDelay); + if (status < 0) + goto error; + } + + /* OFDM_SC setup */ +#ifdef COMPILE_FOR_NONRT + status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2); + if (status < 0) + goto error; +#endif + + /* FEC setup */ + status = write16(state, FEC_DI_INPUT_CTL__A, 1); /* OFDM input */ + if (status < 0) + goto error; + + +#ifdef COMPILE_FOR_NONRT + status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400); + if (status < 0) + goto error; +#else + status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000); + if (status < 0) + goto error; +#endif + status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001); + if (status < 0) + goto error; + + /* Setup MPEG bus */ + status = MPEGTSDtoSetup(state, OM_DVBT); + if (status < 0) + goto error; + /* Set DVBT Presets */ + status = DVBTActivatePresets(state); + if (status < 0) + goto error; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ +/** +* \brief Start dvbt demodulating for channel. +* \param demod instance of demodulator. +* \return DRXStatus_t. +*/ +static int DVBTStart(struct drxk_state *state) +{ + u16 param1; + int status; + /* DRXKOfdmScCmd_t scCmd; */ + + dprintk(1, "\n"); + /* Start correct processes to get in lock */ + /* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */ + param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN; + status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0, OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1, 0, 0, 0); + if (status < 0) + goto error; + /* Start FEC OC */ + status = MPEGTSStart(state); + if (status < 0) + goto error; + status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + + +/*============================================================================*/ + +/** +* \brief Set up dvbt demodulator for channel. +* \param demod instance of demodulator. +* \return DRXStatus_t. +* // original DVBTSetChannel() +*/ +static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz, + s32 tunerFreqOffset) +{ + u16 cmdResult = 0; + u16 transmissionParams = 0; + u16 operationMode = 0; + u32 iqmRcRateOfs = 0; + u32 bandwidth = 0; + u16 param1; + int status; + + dprintk(1, "IF =%d, TFO = %d\n", IntermediateFreqkHz, tunerFreqOffset); + + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* Halt SCU to enable safe non-atomic accesses */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); + if (status < 0) + goto error; + + /* Stop processors */ + status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); + if (status < 0) + goto error; + + /* Mandatory fix, always stop CP, required to set spl offset back to + hardware default (is set to 0 by ucode during pilot detection */ + status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP); + if (status < 0) + goto error; + + /*== Write channel settings to device =====================================*/ + + /* mode */ + switch (state->props.transmission_mode) { + case TRANSMISSION_MODE_AUTO: + default: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M; + /* fall through , try first guess DRX_FFTMODE_8K */ + case TRANSMISSION_MODE_8K: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K; + break; + case TRANSMISSION_MODE_2K: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K; + break; + } + + /* guard */ + switch (state->props.guard_interval) { + default: + case GUARD_INTERVAL_AUTO: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M; + /* fall through , try first guess DRX_GUARD_1DIV4 */ + case GUARD_INTERVAL_1_4: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4; + break; + case GUARD_INTERVAL_1_32: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32; + break; + case GUARD_INTERVAL_1_16: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16; + break; + case GUARD_INTERVAL_1_8: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8; + break; + } + + /* hierarchy */ + switch (state->props.hierarchy) { + case HIERARCHY_AUTO: + case HIERARCHY_NONE: + default: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M; + /* fall through , try first guess SC_RA_RAM_OP_PARAM_HIER_NO */ + /* transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */ + /* break; */ + case HIERARCHY_1: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1; + break; + case HIERARCHY_2: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2; + break; + case HIERARCHY_4: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4; + break; + } + + + /* modulation */ + switch (state->props.modulation) { + case QAM_AUTO: + default: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M; + /* fall through , try first guess DRX_CONSTELLATION_QAM64 */ + case QAM_64: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64; + break; + case QPSK: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK; + break; + case QAM_16: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16; + break; + } +#if 0 + /* No hierachical channels support in BDA */ + /* Priority (only for hierarchical channels) */ + switch (channel->priority) { + case DRX_PRIORITY_LOW: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO; + WR16(devAddr, OFDM_EC_SB_PRIOR__A, + OFDM_EC_SB_PRIOR_LO); + break; + case DRX_PRIORITY_HIGH: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI; + WR16(devAddr, OFDM_EC_SB_PRIOR__A, + OFDM_EC_SB_PRIOR_HI)); + break; + case DRX_PRIORITY_UNKNOWN: /* fall through */ + default: + status = -EINVAL; + goto error; + } +#else + /* Set Priorty high */ + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI; + status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI); + if (status < 0) + goto error; +#endif + + /* coderate */ + switch (state->props.code_rate_HP) { + case FEC_AUTO: + default: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M; + /* fall through , try first guess DRX_CODERATE_2DIV3 */ + case FEC_2_3: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3; + break; + case FEC_1_2: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2; + break; + case FEC_3_4: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4; + break; + case FEC_5_6: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6; + break; + case FEC_7_8: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8; + break; + } + + /* SAW filter selection: normaly not necesarry, but if wanted + the application can select a SAW filter via the driver by using UIOs */ + /* First determine real bandwidth (Hz) */ + /* Also set delay for impulse noise cruncher */ + /* Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is changed + by SC for fix for some 8K,1/8 guard but is restored by InitEC and ResetEC + functions */ + switch (state->props.bandwidth_hz) { + case 0: + state->props.bandwidth_hz = 8000000; + /* fall though */ + case 8000000: + bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ; + status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3052); + if (status < 0) + goto error; + /* cochannel protection for PAL 8 MHz */ + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 7); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 7); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 7); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); + if (status < 0) + goto error; + break; + case 7000000: + bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ; + status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3491); + if (status < 0) + goto error; + /* cochannel protection for PAL 7 MHz */ + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 8); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 8); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 4); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); + if (status < 0) + goto error; + break; + case 6000000: + bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ; + status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 4073); + if (status < 0) + goto error; + /* cochannel protection for NTSC 6 MHz */ + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 19); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 19); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 14); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); + if (status < 0) + goto error; + break; + default: + status = -EINVAL; + goto error; + } + + if (iqmRcRateOfs == 0) { + /* Now compute IQM_RC_RATE_OFS + (((SysFreq/BandWidth)/2)/2) -1) * 2^23) + => + ((SysFreq / BandWidth) * (2^21)) - (2^23) + */ + /* (SysFreq / BandWidth) * (2^28) */ + /* assert (MAX(sysClk)/MIN(bandwidth) < 16) + => assert(MAX(sysClk) < 16*MIN(bandwidth)) + => assert(109714272 > 48000000) = true so Frac 28 can be used */ + iqmRcRateOfs = Frac28a((u32) + ((state->m_sysClockFreq * + 1000) / 3), bandwidth); + /* (SysFreq / BandWidth) * (2^21), rounding before truncating */ + if ((iqmRcRateOfs & 0x7fL) >= 0x40) + iqmRcRateOfs += 0x80L; + iqmRcRateOfs = iqmRcRateOfs >> 7; + /* ((SysFreq / BandWidth) * (2^21)) - (2^23) */ + iqmRcRateOfs = iqmRcRateOfs - (1 << 23); + } + + iqmRcRateOfs &= + ((((u32) IQM_RC_RATE_OFS_HI__M) << + IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M); + status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRateOfs); + if (status < 0) + goto error; + + /* Bandwidth setting done */ + +#if 0 + status = DVBTSetFrequencyShift(demod, channel, tunerOffset); + if (status < 0) + goto error; +#endif + status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true); + if (status < 0) + goto error; + + /*== Start SC, write channel settings to SC ===============================*/ + + /* Activate SCU to enable SCU commands */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + + /* Enable SC after setting all other parameters */ + status = write16(state, OFDM_SC_COMM_STATE__A, 0); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_COMM_EXEC__A, 1); + if (status < 0) + goto error; + + + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* Write SC parameter registers, set all AUTO flags in operation mode */ + param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M | + OFDM_SC_RA_RAM_OP_AUTO_GUARD__M | + OFDM_SC_RA_RAM_OP_AUTO_CONST__M | + OFDM_SC_RA_RAM_OP_AUTO_HIER__M | + OFDM_SC_RA_RAM_OP_AUTO_RATE__M); + status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM, + 0, transmissionParams, param1, 0, 0, 0); + if (status < 0) + goto error; + + if (!state->m_DRXK_A3_ROM_CODE) + status = DVBTCtrlSetSqiSpeed(state, &state->m_sqiSpeed); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + + +/*============================================================================*/ + +/** +* \brief Retreive lock status . +* \param demod Pointer to demodulator instance. +* \param lockStat Pointer to lock status structure. +* \return DRXStatus_t. +* +*/ +static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus) +{ + int status; + const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M | + OFDM_SC_RA_RAM_LOCK_FEC__M); + const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M); + const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M; + + u16 ScRaRamLock = 0; + u16 ScCommExec = 0; + + dprintk(1, "\n"); + + *pLockStatus = NOT_LOCKED; + /* driver 0.9.0 */ + /* Check if SC is running */ + status = read16(state, OFDM_SC_COMM_EXEC__A, &ScCommExec); + if (status < 0) + goto end; + if (ScCommExec == OFDM_SC_COMM_EXEC_STOP) + goto end; + + status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &ScRaRamLock); + if (status < 0) + goto end; + + if ((ScRaRamLock & mpeg_lock_mask) == mpeg_lock_mask) + *pLockStatus = MPEG_LOCK; + else if ((ScRaRamLock & fec_lock_mask) == fec_lock_mask) + *pLockStatus = FEC_LOCK; + else if ((ScRaRamLock & demod_lock_mask) == demod_lock_mask) + *pLockStatus = DEMOD_LOCK; + else if (ScRaRamLock & OFDM_SC_RA_RAM_LOCK_NODVBT__M) + *pLockStatus = NEVER_LOCK; +end: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int PowerUpQAM(struct drxk_state *state) +{ + enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; + int status; + + dprintk(1, "\n"); + status = CtrlPowerMode(state, &powerMode); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + + +/** Power Down QAM */ +static int PowerDownQAM(struct drxk_state *state) +{ + u16 data = 0; + u16 cmdResult; + int status = 0; + + dprintk(1, "\n"); + status = read16(state, SCU_COMM_EXEC__A, &data); + if (status < 0) + goto error; + if (data == SCU_COMM_EXEC_ACTIVE) { + /* + STOP demodulator + QAM and HW blocks + */ + /* stop all comstate->m_exec */ + status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + } + /* powerdown AFE */ + status = SetIqmAf(state, false); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +/*============================================================================*/ + +/** +* \brief Setup of the QAM Measurement intervals for signal quality +* \param demod instance of demod. +* \param modulation current modulation. +* \return DRXStatus_t. +* +* NOTE: +* Take into account that for certain settings the errorcounters can overflow. +* The implementation does not check this. +* +*/ +static int SetQAMMeasurement(struct drxk_state *state, + enum EDrxkConstellation modulation, + u32 symbolRate) +{ + u32 fecBitsDesired = 0; /* BER accounting period */ + u32 fecRsPeriodTotal = 0; /* Total period */ + u16 fecRsPrescale = 0; /* ReedSolomon Measurement Prescale */ + u16 fecRsPeriod = 0; /* Value for corresponding I2C register */ + int status = 0; + + dprintk(1, "\n"); + + fecRsPrescale = 1; + /* fecBitsDesired = symbolRate [kHz] * + FrameLenght [ms] * + (modulation + 1) * + SyncLoss (== 1) * + ViterbiLoss (==1) + */ + switch (modulation) { + case DRX_CONSTELLATION_QAM16: + fecBitsDesired = 4 * symbolRate; + break; + case DRX_CONSTELLATION_QAM32: + fecBitsDesired = 5 * symbolRate; + break; + case DRX_CONSTELLATION_QAM64: + fecBitsDesired = 6 * symbolRate; + break; + case DRX_CONSTELLATION_QAM128: + fecBitsDesired = 7 * symbolRate; + break; + case DRX_CONSTELLATION_QAM256: + fecBitsDesired = 8 * symbolRate; + break; + default: + status = -EINVAL; + } + if (status < 0) + goto error; + + fecBitsDesired /= 1000; /* symbolRate [Hz] -> symbolRate [kHz] */ + fecBitsDesired *= 500; /* meas. period [ms] */ + + /* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */ + /* fecRsPeriodTotal = fecBitsDesired / 1632 */ + fecRsPeriodTotal = (fecBitsDesired / 1632UL) + 1; /* roughly ceil */ + + /* fecRsPeriodTotal = fecRsPrescale * fecRsPeriod */ + fecRsPrescale = 1 + (u16) (fecRsPeriodTotal >> 16); + if (fecRsPrescale == 0) { + /* Divide by zero (though impossible) */ + status = -EINVAL; + if (status < 0) + goto error; + } + fecRsPeriod = + ((u16) fecRsPeriodTotal + + (fecRsPrescale >> 1)) / fecRsPrescale; + + /* write corresponding registers */ + status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fecRsPeriod); + if (status < 0) + goto error; + status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, fecRsPrescale); + if (status < 0) + goto error; + status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fecRsPeriod); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetQAM16(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517); + if (status < 0) + goto error; + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + /* QAM Slicer Settings */ + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM16); + if (status < 0) + goto error; + + /* QAM Loop Controller Coeficients */ + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24); + if (status < 0) + goto error; + + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127); + if (status < 0) + goto error; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief QAM32 specific setup +* \param demod instance of demod. +* \return DRXStatus_t. +*/ +static int SetQAM32(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707); + if (status < 0) + goto error; + + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + /* QAM Slicer Settings */ + + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM32); + if (status < 0) + goto error; + + + /* QAM Loop Controller Coeficients */ + + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10); + if (status < 0) + goto error; + + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief QAM64 specific setup +* \param demod instance of demod. +* \return DRXStatus_t. +*/ +static int SetQAM64(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609); + if (status < 0) + goto error; + + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + /* QAM Slicer Settings */ + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM64); + if (status < 0) + goto error; + + + /* QAM Loop Controller Coeficients */ + + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15); + if (status < 0) + goto error; + + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +/*============================================================================*/ + +/** +* \brief QAM128 specific setup +* \param demod: instance of demod. +* \return DRXStatus_t. +*/ +static int SetQAM128(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238); + if (status < 0) + goto error; + + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + + /* QAM Slicer Settings */ + + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM128); + if (status < 0) + goto error; + + + /* QAM Loop Controller Coeficients */ + + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12); + if (status < 0) + goto error; + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +/*============================================================================*/ + +/** +* \brief QAM256 specific setup +* \param demod: instance of demod. +* \return DRXStatus_t. +*/ +static int SetQAM256(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385); + if (status < 0) + goto error; + + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 8); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 8); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 8); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 8); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + /* QAM Slicer Settings */ + + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM256); + if (status < 0) + goto error; + + + /* QAM Loop Controller Coeficients */ + + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12); + if (status < 0) + goto error; + + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + + +/*============================================================================*/ +/** +* \brief Reset QAM block. +* \param demod: instance of demod. +* \param channel: pointer to channel data. +* \return DRXStatus_t. +*/ +static int QAMResetQAM(struct drxk_state *state) +{ + int status; + u16 cmdResult; + + dprintk(1, "\n"); + /* Stop QAM comstate->m_exec */ + status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP); + if (status < 0) + goto error; + + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief Set QAM symbolrate. +* \param demod: instance of demod. +* \param channel: pointer to channel data. +* \return DRXStatus_t. +*/ +static int QAMSetSymbolrate(struct drxk_state *state) +{ + u32 adcFrequency = 0; + u32 symbFreq = 0; + u32 iqmRcRate = 0; + u16 ratesel = 0; + u32 lcSymbRate = 0; + int status; + + dprintk(1, "\n"); + /* Select & calculate correct IQM rate */ + adcFrequency = (state->m_sysClockFreq * 1000) / 3; + ratesel = 0; + /* printk(KERN_DEBUG "drxk: SR %d\n", state->props.symbol_rate); */ + if (state->props.symbol_rate <= 1188750) + ratesel = 3; + else if (state->props.symbol_rate <= 2377500) + ratesel = 2; + else if (state->props.symbol_rate <= 4755000) + ratesel = 1; + status = write16(state, IQM_FD_RATESEL__A, ratesel); + if (status < 0) + goto error; + + /* + IqmRcRate = ((Fadc / (symbolrate * (4<props.symbol_rate * (1 << ratesel); + if (symbFreq == 0) { + /* Divide by zero */ + status = -EINVAL; + goto error; + } + iqmRcRate = (adcFrequency / symbFreq) * (1 << 21) + + (Frac28a((adcFrequency % symbFreq), symbFreq) >> 7) - + (1 << 23); + status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRate); + if (status < 0) + goto error; + state->m_iqmRcRate = iqmRcRate; + /* + LcSymbFreq = round (.125 * symbolrate / adcFreq * (1<<15)) + */ + symbFreq = state->props.symbol_rate; + if (adcFrequency == 0) { + /* Divide by zero */ + status = -EINVAL; + goto error; + } + lcSymbRate = (symbFreq / adcFrequency) * (1 << 12) + + (Frac28a((symbFreq % adcFrequency), adcFrequency) >> + 16); + if (lcSymbRate > 511) + lcSymbRate = 511; + status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lcSymbRate); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief Get QAM lock status. +* \param demod: instance of demod. +* \param channel: pointer to channel data. +* \return DRXStatus_t. +*/ + +static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus) +{ + int status; + u16 Result[2] = { 0, 0 }; + + dprintk(1, "\n"); + *pLockStatus = NOT_LOCKED; + status = scu_command(state, + SCU_RAM_COMMAND_STANDARD_QAM | + SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2, + Result); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) { + /* 0x0000 NOT LOCKED */ + } else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) { + /* 0x4000 DEMOD LOCKED */ + *pLockStatus = DEMOD_LOCK; + } else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) { + /* 0x8000 DEMOD + FEC LOCKED (system lock) */ + *pLockStatus = MPEG_LOCK; + } else { + /* 0xC000 NEVER LOCKED */ + /* (system will never be able to lock to the signal) */ + /* TODO: check this, intermediate & standard specific lock states are not + taken into account here */ + *pLockStatus = NEVER_LOCK; + } + return status; +} + +#define QAM_MIRROR__M 0x03 +#define QAM_MIRROR_NORMAL 0x00 +#define QAM_MIRRORED 0x01 +#define QAM_MIRROR_AUTO_ON 0x02 +#define QAM_LOCKRANGE__M 0x10 +#define QAM_LOCKRANGE_NORMAL 0x10 + +static int QAMDemodulatorCommand(struct drxk_state *state, + int numberOfParameters) +{ + int status; + u16 cmdResult; + u16 setParamParameters[4] = { 0, 0, 0, 0 }; + + setParamParameters[0] = state->m_Constellation; /* modulation */ + setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ + + if (numberOfParameters == 2) { + u16 setEnvParameters[1] = { 0 }; + + if (state->m_OperationMode == OM_QAM_ITU_C) + setEnvParameters[0] = QAM_TOP_ANNEX_C; + else + setEnvParameters[0] = QAM_TOP_ANNEX_A; + + status = scu_command(state, + SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, + 1, setEnvParameters, 1, &cmdResult); + if (status < 0) + goto error; + + status = scu_command(state, + SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, + numberOfParameters, setParamParameters, + 1, &cmdResult); + } else if (numberOfParameters == 4) { + if (state->m_OperationMode == OM_QAM_ITU_C) + setParamParameters[2] = QAM_TOP_ANNEX_C; + else + setParamParameters[2] = QAM_TOP_ANNEX_A; + + setParamParameters[3] |= (QAM_MIRROR_AUTO_ON); + /* Env parameters */ + /* check for LOCKRANGE Extented */ + /* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */ + + status = scu_command(state, + SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, + numberOfParameters, setParamParameters, + 1, &cmdResult); + } else { + printk(KERN_WARNING "drxk: Unknown QAM demodulator parameter " + "count %d\n", numberOfParameters); + status = -EINVAL; + } + +error: + if (status < 0) + printk(KERN_WARNING "drxk: Warning %d on %s\n", + status, __func__); + return status; +} + +static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz, + s32 tunerFreqOffset) +{ + int status; + u16 cmdResult; + int qamDemodParamCount = state->qam_demod_parameter_count; + + dprintk(1, "\n"); + /* + * STEP 1: reset demodulator + * resets FEC DI and FEC RS + * resets QAM block + * resets SCU variables + */ + status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = QAMResetQAM(state); + if (status < 0) + goto error; + + /* + * STEP 2: configure demodulator + * -set params; resets IQM,QAM,FEC HW; initializes some + * SCU variables + */ + status = QAMSetSymbolrate(state); + if (status < 0) + goto error; + + /* Set params */ + switch (state->props.modulation) { + case QAM_256: + state->m_Constellation = DRX_CONSTELLATION_QAM256; + break; + case QAM_AUTO: + case QAM_64: + state->m_Constellation = DRX_CONSTELLATION_QAM64; + break; + case QAM_16: + state->m_Constellation = DRX_CONSTELLATION_QAM16; + break; + case QAM_32: + state->m_Constellation = DRX_CONSTELLATION_QAM32; + break; + case QAM_128: + state->m_Constellation = DRX_CONSTELLATION_QAM128; + break; + default: + status = -EINVAL; + break; + } + if (status < 0) + goto error; + + /* Use the 4-parameter if it's requested or we're probing for + * the correct command. */ + if (state->qam_demod_parameter_count == 4 + || !state->qam_demod_parameter_count) { + qamDemodParamCount = 4; + status = QAMDemodulatorCommand(state, qamDemodParamCount); + } + + /* Use the 2-parameter command if it was requested or if we're + * probing for the correct command and the 4-parameter command + * failed. */ + if (state->qam_demod_parameter_count == 2 + || (!state->qam_demod_parameter_count && status < 0)) { + qamDemodParamCount = 2; + status = QAMDemodulatorCommand(state, qamDemodParamCount); + } + + if (status < 0) { + dprintk(1, "Could not set demodulator parameters. Make " + "sure qam_demod_parameter_count (%d) is correct for " + "your firmware (%s).\n", + state->qam_demod_parameter_count, + state->microcode_name); + goto error; + } else if (!state->qam_demod_parameter_count) { + dprintk(1, "Auto-probing the correct QAM demodulator command " + "parameters was successful - using %d parameters.\n", + qamDemodParamCount); + + /* + * One of our commands was successful. We don't need to + * auto-probe anymore, now that we got the correct command. + */ + state->qam_demod_parameter_count = qamDemodParamCount; + } + + /* + * STEP 3: enable the system in a mode where the ADC provides valid + * signal setup modulation independent registers + */ +#if 0 + status = SetFrequency(channel, tunerFreqOffset)); + if (status < 0) + goto error; +#endif + status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true); + if (status < 0) + goto error; + + /* Setup BER measurement */ + status = SetQAMMeasurement(state, state->m_Constellation, state->props.symbol_rate); + if (status < 0) + goto error; + + /* Reset default values */ + status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE); + if (status < 0) + goto error; + status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE); + if (status < 0) + goto error; + + /* Reset default LC values */ + status = write16(state, QAM_LC_RATE_LIMIT__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_LC_LPF_FACTORP__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_LC_LPF_FACTORI__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_LC_MODE__A, 7); + if (status < 0) + goto error; + + status = write16(state, QAM_LC_QUAL_TAB0__A, 1); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB1__A, 1); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB2__A, 1); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB3__A, 1); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB4__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB5__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB6__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB8__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB9__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB10__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB12__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB15__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB16__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB20__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB25__A, 4); + if (status < 0) + goto error; + + /* Mirroring, QAM-block starting point not inverted */ + status = write16(state, QAM_SY_SP_INV__A, QAM_SY_SP_INV_SPECTRUM_INV_DIS); + if (status < 0) + goto error; + + /* Halt SCU to enable safe non-atomic accesses */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); + if (status < 0) + goto error; + + /* STEP 4: modulation specific setup */ + switch (state->props.modulation) { + case QAM_16: + status = SetQAM16(state); + break; + case QAM_32: + status = SetQAM32(state); + break; + case QAM_AUTO: + case QAM_64: + status = SetQAM64(state); + break; + case QAM_128: + status = SetQAM128(state); + break; + case QAM_256: + status = SetQAM256(state); + break; + default: + status = -EINVAL; + break; + } + if (status < 0) + goto error; + + /* Activate SCU to enable SCU commands */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + + /* Re-configure MPEG output, requires knowledge of channel bitrate */ + /* extAttr->currentChannel.modulation = channel->modulation; */ + /* extAttr->currentChannel.symbolrate = channel->symbolrate; */ + status = MPEGTSDtoSetup(state, state->m_OperationMode); + if (status < 0) + goto error; + + /* Start processes */ + status = MPEGTSStart(state); + if (status < 0) + goto error; + status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE); + if (status < 0) + goto error; + + /* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* update global DRXK data container */ +/*? extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */ + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetQAMStandard(struct drxk_state *state, + enum OperationMode oMode) +{ + int status; +#ifdef DRXK_QAM_TAPS +#define DRXK_QAMA_TAPS_SELECT +#include "drxk_filters.h" +#undef DRXK_QAMA_TAPS_SELECT +#endif + + dprintk(1, "\n"); + + /* added antenna switch */ + SwitchAntennaToQAM(state); + + /* Ensure correct power-up mode */ + status = PowerUpQAM(state); + if (status < 0) + goto error; + /* Reset QAM block */ + status = QAMResetQAM(state); + if (status < 0) + goto error; + + /* Setup IQM */ + + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); + if (status < 0) + goto error; + status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC); + if (status < 0) + goto error; + + /* Upload IQM Channel Filter settings by + boot loader from ROM table */ + switch (oMode) { + case OM_QAM_ITU_A: + status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); + break; + case OM_QAM_ITU_C: + status = BLDirectCmd(state, IQM_CF_TAP_RE0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); + if (status < 0) + goto error; + status = BLDirectCmd(state, IQM_CF_TAP_IM0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); + break; + default: + status = -EINVAL; + } + if (status < 0) + goto error; + + status = write16(state, IQM_CF_OUT_ENA__A, (1 << IQM_CF_OUT_ENA_QAM__B)); + if (status < 0) + goto error; + status = write16(state, IQM_CF_SYMMETRIC__A, 0); + if (status < 0) + goto error; + status = write16(state, IQM_CF_MIDTAP__A, ((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B))); + if (status < 0) + goto error; + + status = write16(state, IQM_RC_STRETCH__A, 21); + if (status < 0) + goto error; + status = write16(state, IQM_AF_CLP_LEN__A, 0); + if (status < 0) + goto error; + status = write16(state, IQM_AF_CLP_TH__A, 448); + if (status < 0) + goto error; + status = write16(state, IQM_AF_SNS_LEN__A, 0); + if (status < 0) + goto error; + status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0); + if (status < 0) + goto error; + + status = write16(state, IQM_FS_ADJ_SEL__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_RC_ADJ_SEL__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_CF_ADJ_SEL__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_AF_UPD_SEL__A, 0); + if (status < 0) + goto error; + + /* IQM Impulse Noise Processing Unit */ + status = write16(state, IQM_CF_CLP_VAL__A, 500); + if (status < 0) + goto error; + status = write16(state, IQM_CF_DATATH__A, 1000); + if (status < 0) + goto error; + status = write16(state, IQM_CF_BYPASSDET__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_CF_DET_LCT__A, 0); + if (status < 0) + goto error; + status = write16(state, IQM_CF_WND_LEN__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_CF_PKDTH__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_AF_INC_BYPASS__A, 1); + if (status < 0) + goto error; + + /* turn on IQMAF. Must be done before setAgc**() */ + status = SetIqmAf(state, true); + if (status < 0) + goto error; + status = write16(state, IQM_AF_START_LOCK__A, 0x01); + if (status < 0) + goto error; + + /* IQM will not be reset from here, sync ADC and update/init AGC */ + status = ADCSynchronization(state); + if (status < 0) + goto error; + + /* Set the FSM step period */ + status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000); + if (status < 0) + goto error; + + /* Halt SCU to enable safe non-atomic accesses */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); + if (status < 0) + goto error; + + /* No more resets of the IQM, current standard correctly set => + now AGCs can be configured. */ + + status = InitAGC(state, true); + if (status < 0) + goto error; + status = SetPreSaw(state, &(state->m_qamPreSawCfg)); + if (status < 0) + goto error; + + /* Configure AGC's */ + status = SetAgcRf(state, &(state->m_qamRfAgcCfg), true); + if (status < 0) + goto error; + status = SetAgcIf(state, &(state->m_qamIfAgcCfg), true); + if (status < 0) + goto error; + + /* Activate SCU to enable SCU commands */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int WriteGPIO(struct drxk_state *state) +{ + int status; + u16 value = 0; + + dprintk(1, "\n"); + /* stop lock indicator process */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + + /* Write magic word to enable pdr reg write */ + status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); + if (status < 0) + goto error; + + if (state->m_hasSAWSW) { + if (state->UIO_mask & 0x0001) { /* UIO-1 */ + /* write to io pad configuration register - output mode */ + status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg); + if (status < 0) + goto error; + + /* use corresponding bit in io data output registar */ + status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); + if (status < 0) + goto error; + if ((state->m_GPIO & 0x0001) == 0) + value &= 0x7FFF; /* write zero to 15th bit - 1st UIO */ + else + value |= 0x8000; /* write one to 15th bit - 1st UIO */ + /* write back to io data output register */ + status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); + if (status < 0) + goto error; + } + if (state->UIO_mask & 0x0002) { /* UIO-2 */ + /* write to io pad configuration register - output mode */ + status = write16(state, SIO_PDR_SMA_RX_CFG__A, state->m_GPIOCfg); + if (status < 0) + goto error; + + /* use corresponding bit in io data output registar */ + status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); + if (status < 0) + goto error; + if ((state->m_GPIO & 0x0002) == 0) + value &= 0xBFFF; /* write zero to 14th bit - 2st UIO */ + else + value |= 0x4000; /* write one to 14th bit - 2st UIO */ + /* write back to io data output register */ + status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); + if (status < 0) + goto error; + } + if (state->UIO_mask & 0x0004) { /* UIO-3 */ + /* write to io pad configuration register - output mode */ + status = write16(state, SIO_PDR_GPIO_CFG__A, state->m_GPIOCfg); + if (status < 0) + goto error; + + /* use corresponding bit in io data output registar */ + status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); + if (status < 0) + goto error; + if ((state->m_GPIO & 0x0004) == 0) + value &= 0xFFFB; /* write zero to 2nd bit - 3rd UIO */ + else + value |= 0x0004; /* write one to 2nd bit - 3rd UIO */ + /* write back to io data output register */ + status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); + if (status < 0) + goto error; + } + } + /* Write magic word to disable pdr reg write */ + status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SwitchAntennaToQAM(struct drxk_state *state) +{ + int status = 0; + bool gpio_state; + + dprintk(1, "\n"); + + if (!state->antenna_gpio) + return 0; + + gpio_state = state->m_GPIO & state->antenna_gpio; + + if (state->antenna_dvbt ^ gpio_state) { + /* Antenna is on DVB-T mode. Switch */ + if (state->antenna_dvbt) + state->m_GPIO &= ~state->antenna_gpio; + else + state->m_GPIO |= state->antenna_gpio; + status = WriteGPIO(state); + } + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SwitchAntennaToDVBT(struct drxk_state *state) +{ + int status = 0; + bool gpio_state; + + dprintk(1, "\n"); + + if (!state->antenna_gpio) + return 0; + + gpio_state = state->m_GPIO & state->antenna_gpio; + + if (!(state->antenna_dvbt ^ gpio_state)) { + /* Antenna is on DVB-C mode. Switch */ + if (state->antenna_dvbt) + state->m_GPIO |= state->antenna_gpio; + else + state->m_GPIO &= ~state->antenna_gpio; + status = WriteGPIO(state); + } + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + + +static int PowerDownDevice(struct drxk_state *state) +{ + /* Power down to requested mode */ + /* Backup some register settings */ + /* Set pins with possible pull-ups connected to them in input mode */ + /* Analog power down */ + /* ADC power down */ + /* Power down device */ + int status; + + dprintk(1, "\n"); + if (state->m_bPDownOpenBridge) { + /* Open I2C bridge before power down of DRXK */ + status = ConfigureI2CBridge(state, true); + if (status < 0) + goto error; + } + /* driver 0.9.0 */ + status = DVBTEnableOFDMTokenRing(state, false); + if (status < 0) + goto error; + + status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_CLOCK); + if (status < 0) + goto error; + status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); + if (status < 0) + goto error; + state->m_HICfgCtrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; + status = HI_CfgCommand(state); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int init_drxk(struct drxk_state *state) +{ + int status = 0, n = 0; + enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; + u16 driverVersion; + + dprintk(1, "\n"); + if ((state->m_DrxkState == DRXK_UNINITIALIZED)) { + drxk_i2c_lock(state); + status = PowerUpDevice(state); + if (status < 0) + goto error; + status = DRXX_Open(state); + if (status < 0) + goto error; + /* Soft reset of OFDM-, sys- and osc-clockdomain */ + status = write16(state, SIO_CC_SOFT_RST__A, SIO_CC_SOFT_RST_OFDM__M | SIO_CC_SOFT_RST_SYS__M | SIO_CC_SOFT_RST_OSC__M); + if (status < 0) + goto error; + status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); + if (status < 0) + goto error; + /* TODO is this needed, if yes how much delay in worst case scenario */ + msleep(1); + state->m_DRXK_A3_PATCH_CODE = true; + status = GetDeviceCapabilities(state); + if (status < 0) + goto error; + + /* Bridge delay, uses oscilator clock */ + /* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */ + /* SDA brdige delay */ + state->m_HICfgBridgeDelay = + (u16) ((state->m_oscClockFreq / 1000) * + HI_I2C_BRIDGE_DELAY) / 1000; + /* Clipping */ + if (state->m_HICfgBridgeDelay > + SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) { + state->m_HICfgBridgeDelay = + SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M; + } + /* SCL bridge delay, same as SDA for now */ + state->m_HICfgBridgeDelay += + state->m_HICfgBridgeDelay << + SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B; + + status = InitHI(state); + if (status < 0) + goto error; + /* disable various processes */ +#if NOA1ROM + if (!(state->m_DRXK_A1_ROM_CODE) + && !(state->m_DRXK_A2_ROM_CODE)) +#endif + { + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + } + + /* disable MPEG port */ + status = MPEGTSDisable(state); + if (status < 0) + goto error; + + /* Stop AUD and SCU */ + status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP); + if (status < 0) + goto error; + + /* enable token-ring bus through OFDM block for possible ucode upload */ + status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_ON); + if (status < 0) + goto error; + + /* include boot loader section */ + status = write16(state, SIO_BL_COMM_EXEC__A, SIO_BL_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = BLChainCmd(state, 0, 6, 100); + if (status < 0) + goto error; + + if (state->fw) { + status = DownloadMicrocode(state, state->fw->data, + state->fw->size); + if (status < 0) + goto error; + } + + /* disable token-ring bus through OFDM block for possible ucode upload */ + status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_OFF); + if (status < 0) + goto error; + + /* Run SCU for a little while to initialize microcode version numbers */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = DRXX_Open(state); + if (status < 0) + goto error; + /* added for test */ + msleep(30); + + powerMode = DRXK_POWER_DOWN_OFDM; + status = CtrlPowerMode(state, &powerMode); + if (status < 0) + goto error; + + /* Stamp driver version number in SCU data RAM in BCD code + Done to enable field application engineers to retreive drxdriver version + via I2C from SCU RAM. + Not using SCU command interface for SCU register access since no + microcode may be present. + */ + driverVersion = + (((DRXK_VERSION_MAJOR / 100) % 10) << 12) + + (((DRXK_VERSION_MAJOR / 10) % 10) << 8) + + ((DRXK_VERSION_MAJOR % 10) << 4) + + (DRXK_VERSION_MINOR % 10); + status = write16(state, SCU_RAM_DRIVER_VER_HI__A, driverVersion); + if (status < 0) + goto error; + driverVersion = + (((DRXK_VERSION_PATCH / 1000) % 10) << 12) + + (((DRXK_VERSION_PATCH / 100) % 10) << 8) + + (((DRXK_VERSION_PATCH / 10) % 10) << 4) + + (DRXK_VERSION_PATCH % 10); + status = write16(state, SCU_RAM_DRIVER_VER_LO__A, driverVersion); + if (status < 0) + goto error; + + printk(KERN_INFO "DRXK driver version %d.%d.%d\n", + DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR, + DRXK_VERSION_PATCH); + + /* Dirty fix of default values for ROM/PATCH microcode + Dirty because this fix makes it impossible to setup suitable values + before calling DRX_Open. This solution requires changes to RF AGC speed + to be done via the CTRL function after calling DRX_Open */ + + /* m_dvbtRfAgcCfg.speed = 3; */ + + /* Reset driver debug flags to 0 */ + status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0); + if (status < 0) + goto error; + /* driver 0.9.0 */ + /* Setup FEC OC: + NOTE: No more full FEC resets allowed afterwards!! */ + status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP); + if (status < 0) + goto error; + /* MPEGTS functions are still the same */ + status = MPEGTSDtoInit(state); + if (status < 0) + goto error; + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = MPEGTSConfigurePolarity(state); + if (status < 0) + goto error; + status = MPEGTSConfigurePins(state, state->m_enableMPEGOutput); + if (status < 0) + goto error; + /* added: configure GPIO */ + status = WriteGPIO(state); + if (status < 0) + goto error; + + state->m_DrxkState = DRXK_STOPPED; + + if (state->m_bPowerDown) { + status = PowerDownDevice(state); + if (status < 0) + goto error; + state->m_DrxkState = DRXK_POWERED_DOWN; + } else + state->m_DrxkState = DRXK_STOPPED; + + /* Initialize the supported delivery systems */ + n = 0; + if (state->m_hasDVBC) { + state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_A; + state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_C; + strlcat(state->frontend.ops.info.name, " DVB-C", + sizeof(state->frontend.ops.info.name)); + } + if (state->m_hasDVBT) { + state->frontend.ops.delsys[n++] = SYS_DVBT; + strlcat(state->frontend.ops.info.name, " DVB-T", + sizeof(state->frontend.ops.info.name)); + } + drxk_i2c_unlock(state); + } +error: + if (status < 0) { + state->m_DrxkState = DRXK_NO_DEV; + drxk_i2c_unlock(state); + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + } + + return status; +} + +static void load_firmware_cb(const struct firmware *fw, + void *context) +{ + struct drxk_state *state = context; + + dprintk(1, ": %s\n", fw ? "firmware loaded" : "firmware not loaded"); + if (!fw) { + printk(KERN_ERR + "drxk: Could not load firmware file %s.\n", + state->microcode_name); + printk(KERN_INFO + "drxk: Copy %s to your hotplug directory!\n", + state->microcode_name); + state->microcode_name = NULL; + + /* + * As firmware is now load asynchronous, it is not possible + * anymore to fail at frontend attach. We might silently + * return here, and hope that the driver won't crash. + * We might also change all DVB callbacks to return -ENODEV + * if the device is not initialized. + * As the DRX-K devices have their own internal firmware, + * let's just hope that it will match a firmware revision + * compatible with this driver and proceed. + */ + } + state->fw = fw; + + init_drxk(state); +} + +static void drxk_release(struct dvb_frontend *fe) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, "\n"); + if (state->fw) + release_firmware(state->fw); + + kfree(state); +} + +static int drxk_sleep(struct dvb_frontend *fe) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, "\n"); + + if (state->m_DrxkState == DRXK_NO_DEV) + return -ENODEV; + if (state->m_DrxkState == DRXK_UNINITIALIZED) + return 0; + + ShutDown(state); + return 0; +} + +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, ": %s\n", enable ? "enable" : "disable"); + + if (state->m_DrxkState == DRXK_NO_DEV) + return -ENODEV; + + return ConfigureI2CBridge(state, enable ? true : false); +} + +static int drxk_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + u32 delsys = p->delivery_system, old_delsys; + struct drxk_state *state = fe->demodulator_priv; + u32 IF; + + dprintk(1, "\n"); + + if (state->m_DrxkState == DRXK_NO_DEV) + return -ENODEV; + + if (state->m_DrxkState == DRXK_UNINITIALIZED) + return -EAGAIN; + + if (!fe->ops.tuner_ops.get_if_frequency) { + printk(KERN_ERR + "drxk: Error: get_if_frequency() not defined at tuner. Can't work without it!\n"); + return -EINVAL; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + old_delsys = state->props.delivery_system; + state->props = *p; + + if (old_delsys != delsys) { + ShutDown(state); + switch (delsys) { + case SYS_DVBC_ANNEX_A: + case SYS_DVBC_ANNEX_C: + if (!state->m_hasDVBC) + return -EINVAL; + state->m_itut_annex_c = (delsys == SYS_DVBC_ANNEX_C) ? true : false; + if (state->m_itut_annex_c) + SetOperationMode(state, OM_QAM_ITU_C); + else + SetOperationMode(state, OM_QAM_ITU_A); + break; + case SYS_DVBT: + if (!state->m_hasDVBT) + return -EINVAL; + SetOperationMode(state, OM_DVBT); + break; + default: + return -EINVAL; + } + } + + fe->ops.tuner_ops.get_if_frequency(fe, &IF); + Start(state, 0, IF); + + /* After set_frontend, stats aren't avaliable */ + p->strength.stat[0].scale = FE_SCALE_RELATIVE; + p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + + /* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */ + + return 0; +} + +static int get_strength(struct drxk_state *state, u64 *strength) +{ + int status; + struct SCfgAgc rfAgc, ifAgc; + u32 totalGain = 0; + u32 atten = 0; + u32 agcRange = 0; + u16 scu_lvl = 0; + u16 scu_coc = 0; + /* FIXME: those are part of the tuner presets */ + u16 tunerRfGain = 50; /* Default value on az6007 driver */ + u16 tunerIfGain = 40; /* Default value on az6007 driver */ + + *strength = 0; + + if (IsDVBT(state)) { + rfAgc = state->m_dvbtRfAgcCfg; + ifAgc = state->m_dvbtIfAgcCfg; + } else if (IsQAM(state)) { + rfAgc = state->m_qamRfAgcCfg; + ifAgc = state->m_qamIfAgcCfg; + } else { + rfAgc = state->m_atvRfAgcCfg; + ifAgc = state->m_atvIfAgcCfg; + } + + if (rfAgc.ctrlMode == DRXK_AGC_CTRL_AUTO) { + /* SCU outputLevel */ + status = read16(state, SCU_RAM_AGC_RF_IACCU_HI__A, &scu_lvl); + if (status < 0) + return status; + + /* SCU c.o.c. */ + read16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, &scu_coc); + if (status < 0) + return status; + + if (((u32) scu_lvl + (u32) scu_coc) < 0xffff) + rfAgc.outputLevel = scu_lvl + scu_coc; + else + rfAgc.outputLevel = 0xffff; + + /* Take RF gain into account */ + totalGain += tunerRfGain; + + /* clip output value */ + if (rfAgc.outputLevel < rfAgc.minOutputLevel) + rfAgc.outputLevel = rfAgc.minOutputLevel; + if (rfAgc.outputLevel > rfAgc.maxOutputLevel) + rfAgc.outputLevel = rfAgc.maxOutputLevel; + + agcRange = (u32) (rfAgc.maxOutputLevel - rfAgc.minOutputLevel); + if (agcRange > 0) { + atten += 100UL * + ((u32)(tunerRfGain)) * + ((u32)(rfAgc.outputLevel - rfAgc.minOutputLevel)) + / agcRange; + } + } + + if (ifAgc.ctrlMode == DRXK_AGC_CTRL_AUTO) { + status = read16(state, SCU_RAM_AGC_IF_IACCU_HI__A, + &ifAgc.outputLevel); + if (status < 0) + return status; + + status = read16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, + &ifAgc.top); + if (status < 0) + return status; + + /* Take IF gain into account */ + totalGain += (u32) tunerIfGain; + + /* clip output value */ + if (ifAgc.outputLevel < ifAgc.minOutputLevel) + ifAgc.outputLevel = ifAgc.minOutputLevel; + if (ifAgc.outputLevel > ifAgc.maxOutputLevel) + ifAgc.outputLevel = ifAgc.maxOutputLevel; + + agcRange = (u32) (ifAgc.maxOutputLevel - ifAgc.minOutputLevel); + if (agcRange > 0) { + atten += 100UL * + ((u32)(tunerIfGain)) * + ((u32)(ifAgc.outputLevel - ifAgc.minOutputLevel)) + / agcRange; + } + } + + /* + * Convert to 0..65535 scale. + * If it can't be measured (AGC is disabled), just show 100%. + */ + if (totalGain > 0) + *strength = (65535UL * atten / totalGain / 100); + else + *strength = 65535; + + return 0; +} + +static int drxk_get_stats(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct drxk_state *state = fe->demodulator_priv; + int status; + u32 stat; + u16 reg16; + u32 post_bit_count; + u32 post_bit_err_count; + u32 post_bit_error_scale; + u32 pre_bit_err_count; + u32 pre_bit_count; + u32 pkt_count; + u32 pkt_error_count; + s32 cnr; + + if (state->m_DrxkState == DRXK_NO_DEV) + return -ENODEV; + if (state->m_DrxkState == DRXK_UNINITIALIZED) + return -EAGAIN; + + /* get status */ + state->fe_status = 0; + GetLockStatus(state, &stat); + if (stat == MPEG_LOCK) + state->fe_status |= 0x1f; + if (stat == FEC_LOCK) + state->fe_status |= 0x0f; + if (stat == DEMOD_LOCK) + state->fe_status |= 0x07; + + /* + * Estimate signal strength from AGC + */ + get_strength(state, &c->strength.stat[0].uvalue); + c->strength.stat[0].scale = FE_SCALE_RELATIVE; + + + if (stat >= DEMOD_LOCK) { + GetSignalToNoise(state, &cnr); + c->cnr.stat[0].svalue = cnr * 100; + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + } else { + c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + } + + if (stat < FEC_LOCK) { + c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + return 0; + } + + /* Get post BER */ + + /* BER measurement is valid if at least FEC lock is achieved */ + + /* OFDM_EC_VD_REQ_SMB_CNT__A and/or OFDM_EC_VD_REQ_BIT_CNT can be written + to set nr of symbols or bits over which + to measure EC_VD_REG_ERR_BIT_CNT__A . See CtrlSetCfg(). */ + + /* Read registers for post/preViterbi BER calculation */ + status = read16(state, OFDM_EC_VD_ERR_BIT_CNT__A, ®16); + if (status < 0) + goto error; + pre_bit_err_count = reg16; + + status = read16(state, OFDM_EC_VD_IN_BIT_CNT__A , ®16); + if (status < 0) + goto error; + pre_bit_count = reg16; + + /* Number of bit-errors */ + status = read16(state, FEC_RS_NR_BIT_ERRORS__A, ®16); + if (status < 0) + goto error; + post_bit_err_count = reg16; + + status = read16(state, FEC_RS_MEASUREMENT_PRESCALE__A, ®16); + if (status < 0) + goto error; + post_bit_error_scale = reg16; + + status = read16(state, FEC_RS_MEASUREMENT_PERIOD__A, ®16); + if (status < 0) + goto error; + pkt_count = reg16; + + status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, ®16); + if (status < 0) + goto error; + pkt_error_count = reg16; + write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0); + + post_bit_err_count *= post_bit_error_scale; + + post_bit_count = pkt_count * 204 * 8; + + /* Store the results */ + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_error.stat[0].uvalue += pkt_error_count; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].uvalue += pkt_count; + + c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[0].uvalue += pre_bit_err_count; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[0].uvalue += pre_bit_count; + + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue += post_bit_err_count; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].uvalue += post_bit_count; + +error: + return status; +} + + +static int drxk_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct drxk_state *state = fe->demodulator_priv; + int rc; + + dprintk(1, "\n"); + + rc = drxk_get_stats(fe); + if (rc < 0) + return rc; + + *status = state->fe_status; + + return 0; +} + +static int drxk_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + struct drxk_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + dprintk(1, "\n"); + + if (state->m_DrxkState == DRXK_NO_DEV) + return -ENODEV; + if (state->m_DrxkState == DRXK_UNINITIALIZED) + return -EAGAIN; + + *strength = c->strength.stat[0].uvalue; + return 0; +} + +static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct drxk_state *state = fe->demodulator_priv; + s32 snr2; + + dprintk(1, "\n"); + + if (state->m_DrxkState == DRXK_NO_DEV) + return -ENODEV; + if (state->m_DrxkState == DRXK_UNINITIALIZED) + return -EAGAIN; + + GetSignalToNoise(state, &snr2); + + /* No negative SNR, clip to zero */ + if (snr2 < 0) + snr2 = 0; + *snr = snr2 & 0xffff; + return 0; +} + +static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct drxk_state *state = fe->demodulator_priv; + u16 err; + + dprintk(1, "\n"); + + if (state->m_DrxkState == DRXK_NO_DEV) + return -ENODEV; + if (state->m_DrxkState == DRXK_UNINITIALIZED) + return -EAGAIN; + + DVBTQAMGetAccPktErr(state, &err); + *ucblocks = (u32) err; + return 0; +} + +static int drxk_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings + *sets) +{ + struct drxk_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + + dprintk(1, "\n"); + + if (state->m_DrxkState == DRXK_NO_DEV) + return -ENODEV; + if (state->m_DrxkState == DRXK_UNINITIALIZED) + return -EAGAIN; + + switch (p->delivery_system) { + case SYS_DVBC_ANNEX_A: + case SYS_DVBC_ANNEX_C: + case SYS_DVBT: + sets->min_delay_ms = 3000; + sets->max_drift = 0; + sets->step_size = 0; + return 0; + default: + return -EINVAL; + } +} + +static struct dvb_frontend_ops drxk_ops = { + /* .delsys will be filled dynamically */ + .info = { + .name = "DRXK", + .frequency_min = 47000000, + .frequency_max = 865000000, + /* For DVB-C */ + .symbol_rate_min = 870000, + .symbol_rate_max = 11700000, + /* For DVB-T */ + .frequency_stepsize = 166667, + + .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_MUTE_TS | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO + }, + + .release = drxk_release, + .sleep = drxk_sleep, + .i2c_gate_ctrl = drxk_gate_ctrl, + + .set_frontend = drxk_set_parameters, + .get_tune_settings = drxk_get_tune_settings, + + .read_status = drxk_read_status, + .read_signal_strength = drxk_read_signal_strength, + .read_snr = drxk_read_snr, + .read_ucblocks = drxk_read_ucblocks, +}; + +struct dvb_frontend *drxk_attach(const struct drxk_config *config, + struct i2c_adapter *i2c) +{ + struct dtv_frontend_properties *p; + struct drxk_state *state = NULL; + u8 adr = config->adr; + int status; + + dprintk(1, "\n"); + state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL); + if (!state) + return NULL; + + state->i2c = i2c; + state->demod_address = adr; + state->single_master = config->single_master; + state->microcode_name = config->microcode_name; + state->qam_demod_parameter_count = config->qam_demod_parameter_count; + state->no_i2c_bridge = config->no_i2c_bridge; + state->antenna_gpio = config->antenna_gpio; + state->antenna_dvbt = config->antenna_dvbt; + state->m_ChunkSize = config->chunk_size; + state->enable_merr_cfg = config->enable_merr_cfg; + + if (config->dynamic_clk) { + state->m_DVBTStaticCLK = 0; + state->m_DVBCStaticCLK = 0; + } else { + state->m_DVBTStaticCLK = 1; + state->m_DVBCStaticCLK = 1; + } + + + if (config->mpeg_out_clk_strength) + state->m_TSClockkStrength = config->mpeg_out_clk_strength & 0x07; + else + state->m_TSClockkStrength = 0x06; + + if (config->parallel_ts) + state->m_enableParallel = true; + else + state->m_enableParallel = false; + + /* NOTE: as more UIO bits will be used, add them to the mask */ + state->UIO_mask = config->antenna_gpio; + + /* Default gpio to DVB-C */ + if (!state->antenna_dvbt && state->antenna_gpio) + state->m_GPIO |= state->antenna_gpio; + else + state->m_GPIO &= ~state->antenna_gpio; + + mutex_init(&state->mutex); + + memcpy(&state->frontend.ops, &drxk_ops, sizeof(drxk_ops)); + state->frontend.demodulator_priv = state; + + init_state(state); + + /* Load firmware and initialize DRX-K */ + if (state->microcode_name) { + if (config->load_firmware_sync) { + const struct firmware *fw = NULL; + + status = request_firmware(&fw, state->microcode_name, + state->i2c->dev.parent); + if (status < 0) + fw = NULL; + load_firmware_cb(fw, state); + } else { + status = request_firmware_nowait(THIS_MODULE, 1, + state->microcode_name, + state->i2c->dev.parent, + GFP_KERNEL, + state, load_firmware_cb); + if (status < 0) { + printk(KERN_ERR + "drxk: failed to request a firmware\n"); + return NULL; + } + } + } else if (init_drxk(state) < 0) + goto error; + + + /* Initialize stats */ + p = &state->frontend.dtv_property_cache; + p->strength.len = 1; + p->cnr.len = 1; + p->block_error.len = 1; + p->block_count.len = 1; + p->pre_bit_error.len = 1; + p->pre_bit_count.len = 1; + p->post_bit_error.len = 1; + p->post_bit_count.len = 1; + + p->strength.stat[0].scale = FE_SCALE_RELATIVE; + p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + + printk(KERN_INFO "drxk: frontend initialized.\n"); + return &state->frontend; + +error: + printk(KERN_ERR "drxk: not found\n"); + kfree(state); + return NULL; +} +EXPORT_SYMBOL(drxk_attach); + +MODULE_DESCRIPTION("DRX-K driver"); +MODULE_AUTHOR("Ralph Metzler"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/drxk_hard.h b/drivers/media/dvb-frontends/drxk_hard.h new file mode 100644 index 00000000..b8424f15 --- /dev/null +++ b/drivers/media/dvb-frontends/drxk_hard.h @@ -0,0 +1,362 @@ +#include "drxk_map.h" + +#define DRXK_VERSION_MAJOR 0 +#define DRXK_VERSION_MINOR 9 +#define DRXK_VERSION_PATCH 4300 + +#define HI_I2C_DELAY 42 +#define HI_I2C_BRIDGE_DELAY 350 +#define DRXK_MAX_RETRIES 100 + +#define DRIVER_4400 1 + +#define DRXX_JTAGID 0x039210D9 +#define DRXX_J_JTAGID 0x239310D9 +#define DRXX_K_JTAGID 0x039210D9 + +#define DRX_UNKNOWN 254 +#define DRX_AUTO 255 + +#define DRX_SCU_READY 0 +#define DRXK_MAX_WAITTIME (200) +#define SCU_RESULT_OK 0 +#define SCU_RESULT_SIZE -4 +#define SCU_RESULT_INVPAR -3 +#define SCU_RESULT_UNKSTD -2 +#define SCU_RESULT_UNKCMD -1 + +#ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT +#define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200) +#endif + +#define DRXK_8VSB_MPEG_BIT_RATE 19392658UL /*bps*/ +#define DRXK_DVBT_MPEG_BIT_RATE 32000000UL /*bps*/ +#define DRXK_QAM16_MPEG_BIT_RATE 27000000UL /*bps*/ +#define DRXK_QAM32_MPEG_BIT_RATE 33000000UL /*bps*/ +#define DRXK_QAM64_MPEG_BIT_RATE 40000000UL /*bps*/ +#define DRXK_QAM128_MPEG_BIT_RATE 46000000UL /*bps*/ +#define DRXK_QAM256_MPEG_BIT_RATE 52000000UL /*bps*/ +#define DRXK_MAX_MPEG_BIT_RATE 52000000UL /*bps*/ + +#define IQM_CF_OUT_ENA_OFDM__M 0x4 +#define IQM_FS_ADJ_SEL_B_QAM 0x1 +#define IQM_FS_ADJ_SEL_B_OFF 0x0 +#define IQM_FS_ADJ_SEL_B_VSB 0x2 +#define IQM_RC_ADJ_SEL_B_OFF 0x0 +#define IQM_RC_ADJ_SEL_B_QAM 0x1 +#define IQM_RC_ADJ_SEL_B_VSB 0x2 + +enum OperationMode { + OM_NONE, + OM_QAM_ITU_A, + OM_QAM_ITU_B, + OM_QAM_ITU_C, + OM_DVBT +}; + +enum DRXPowerMode { + DRX_POWER_UP = 0, + DRX_POWER_MODE_1, + DRX_POWER_MODE_2, + DRX_POWER_MODE_3, + DRX_POWER_MODE_4, + DRX_POWER_MODE_5, + DRX_POWER_MODE_6, + DRX_POWER_MODE_7, + DRX_POWER_MODE_8, + + DRX_POWER_MODE_9, + DRX_POWER_MODE_10, + DRX_POWER_MODE_11, + DRX_POWER_MODE_12, + DRX_POWER_MODE_13, + DRX_POWER_MODE_14, + DRX_POWER_MODE_15, + DRX_POWER_MODE_16, + DRX_POWER_DOWN = 255 +}; + + +/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */ +#ifndef DRXK_POWER_DOWN_OFDM +#define DRXK_POWER_DOWN_OFDM DRX_POWER_MODE_1 +#endif + +/** /brief Intermediate power mode for DRXK, power down core (sysclk) */ +#ifndef DRXK_POWER_DOWN_CORE +#define DRXK_POWER_DOWN_CORE DRX_POWER_MODE_9 +#endif + +/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */ +#ifndef DRXK_POWER_DOWN_PLL +#define DRXK_POWER_DOWN_PLL DRX_POWER_MODE_10 +#endif + + +enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF }; +enum EDrxkState { + DRXK_UNINITIALIZED = 0, + DRXK_STOPPED, + DRXK_DTV_STARTED, + DRXK_ATV_STARTED, + DRXK_POWERED_DOWN, + DRXK_NO_DEV /* If drxk init failed */ +}; + +enum EDrxkCoefArrayIndex { + DRXK_COEF_IDX_MN = 0, + DRXK_COEF_IDX_FM , + DRXK_COEF_IDX_L , + DRXK_COEF_IDX_LP , + DRXK_COEF_IDX_BG , + DRXK_COEF_IDX_DK , + DRXK_COEF_IDX_I , + DRXK_COEF_IDX_MAX +}; +enum EDrxkSifAttenuation { + DRXK_SIF_ATTENUATION_0DB, + DRXK_SIF_ATTENUATION_3DB, + DRXK_SIF_ATTENUATION_6DB, + DRXK_SIF_ATTENUATION_9DB +}; +enum EDrxkConstellation { + DRX_CONSTELLATION_BPSK = 0, + DRX_CONSTELLATION_QPSK, + DRX_CONSTELLATION_PSK8, + DRX_CONSTELLATION_QAM16, + DRX_CONSTELLATION_QAM32, + DRX_CONSTELLATION_QAM64, + DRX_CONSTELLATION_QAM128, + DRX_CONSTELLATION_QAM256, + DRX_CONSTELLATION_QAM512, + DRX_CONSTELLATION_QAM1024, + DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN, + DRX_CONSTELLATION_AUTO = DRX_AUTO +}; +enum EDrxkInterleaveMode { + DRXK_QAM_I12_J17 = 16, + DRXK_QAM_I_UNKNOWN = DRX_UNKNOWN +}; +enum { + DRXK_SPIN_A1 = 0, + DRXK_SPIN_A2, + DRXK_SPIN_A3, + DRXK_SPIN_UNKNOWN +}; + +enum DRXKCfgDvbtSqiSpeed { + DRXK_DVBT_SQI_SPEED_FAST = 0, + DRXK_DVBT_SQI_SPEED_MEDIUM, + DRXK_DVBT_SQI_SPEED_SLOW, + DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN +} ; + +enum DRXFftmode_t { + DRX_FFTMODE_2K = 0, + DRX_FFTMODE_4K, + DRX_FFTMODE_8K, + DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN, + DRX_FFTMODE_AUTO = DRX_AUTO +}; + +enum DRXMPEGStrWidth_t { + DRX_MPEG_STR_WIDTH_1, + DRX_MPEG_STR_WIDTH_8 +}; + +enum DRXQamLockRange_t { + DRX_QAM_LOCKRANGE_NORMAL, + DRX_QAM_LOCKRANGE_EXTENDED +}; + +struct DRXKCfgDvbtEchoThres_t { + u16 threshold; + enum DRXFftmode_t fftMode; +} ; + +struct SCfgAgc { + enum AGC_CTRL_MODE ctrlMode; /* off, user, auto */ + u16 outputLevel; /* range dependent on AGC */ + u16 minOutputLevel; /* range dependent on AGC */ + u16 maxOutputLevel; /* range dependent on AGC */ + u16 speed; /* range dependent on AGC */ + u16 top; /* rf-agc take over point */ + u16 cutOffCurrent; /* rf-agc is accelerated if output current + is below cut-off current */ + u16 IngainTgtMax; + u16 FastClipCtrlDelay; +}; + +struct SCfgPreSaw { + u16 reference; /* pre SAW reference value, range 0 .. 31 */ + bool usePreSaw; /* TRUE algorithms must use pre SAW sense */ +}; + +struct DRXKOfdmScCmd_t { + u16 cmd; /**< Command number */ + u16 subcmd; /**< Sub-command parameter*/ + u16 param0; /**< General purpous param */ + u16 param1; /**< General purpous param */ + u16 param2; /**< General purpous param */ + u16 param3; /**< General purpous param */ + u16 param4; /**< General purpous param */ +}; + +struct drxk_state { + struct dvb_frontend frontend; + struct dtv_frontend_properties props; + struct device *dev; + + struct i2c_adapter *i2c; + u8 demod_address; + void *priv; + + struct mutex mutex; + + u32 m_Instance; /**< Channel 1,2,3 or 4 */ + + int m_ChunkSize; + u8 Chunk[256]; + + bool m_hasLNA; + bool m_hasDVBT; + bool m_hasDVBC; + bool m_hasAudio; + bool m_hasATV; + bool m_hasOOB; + bool m_hasSAWSW; /**< TRUE if mat_tx is available */ + bool m_hasGPIO1; /**< TRUE if mat_rx is available */ + bool m_hasGPIO2; /**< TRUE if GPIO is available */ + bool m_hasIRQN; /**< TRUE if IRQN is available */ + u16 m_oscClockFreq; + u16 m_HICfgTimingDiv; + u16 m_HICfgBridgeDelay; + u16 m_HICfgWakeUpKey; + u16 m_HICfgTimeout; + u16 m_HICfgCtrl; + s32 m_sysClockFreq; /**< system clock frequency in kHz */ + + enum EDrxkState m_DrxkState; /**< State of Drxk (init,stopped,started) */ + enum OperationMode m_OperationMode; /**< digital standards */ + struct SCfgAgc m_vsbRfAgcCfg; /**< settings for VSB RF-AGC */ + struct SCfgAgc m_vsbIfAgcCfg; /**< settings for VSB IF-AGC */ + u16 m_vsbPgaCfg; /**< settings for VSB PGA */ + struct SCfgPreSaw m_vsbPreSawCfg; /**< settings for pre SAW sense */ + s32 m_Quality83percent; /**< MER level (*0.1 dB) for 83% quality indication */ + s32 m_Quality93percent; /**< MER level (*0.1 dB) for 93% quality indication */ + bool m_smartAntInverted; + bool m_bDebugEnableBridge; + bool m_bPDownOpenBridge; /**< only open DRXK bridge before power-down once it has been accessed */ + bool m_bPowerDown; /**< Power down when not used */ + + u32 m_IqmFsRateOfs; /**< frequency shift as written to DRXK register (28bit fixpoint) */ + + bool m_enableMPEGOutput; /**< If TRUE, enable MPEG output */ + bool m_insertRSByte; /**< If TRUE, insert RS byte */ + bool m_enableParallel; /**< If TRUE, parallel out otherwise serial */ + bool m_invertDATA; /**< If TRUE, invert DATA signals */ + bool m_invertERR; /**< If TRUE, invert ERR signal */ + bool m_invertSTR; /**< If TRUE, invert STR signals */ + bool m_invertVAL; /**< If TRUE, invert VAL signals */ + bool m_invertCLK; /**< If TRUE, invert CLK signals */ + bool m_DVBCStaticCLK; + bool m_DVBTStaticCLK; /**< If TRUE, static MPEG clockrate will + be used, otherwise clockrate will + adapt to the bitrate of the TS */ + u32 m_DVBTBitrate; + u32 m_DVBCBitrate; + + u8 m_TSDataStrength; + u8 m_TSClockkStrength; + + bool m_itut_annex_c; /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */ + + enum DRXMPEGStrWidth_t m_widthSTR; /**< MPEG start width */ + u32 m_mpegTsStaticBitrate; /**< Maximum bitrate in b/s in case + static clockrate is selected */ + + /* LARGE_INTEGER m_StartTime; */ /**< Contains the time of the last demod start */ + s32 m_MpegLockTimeOut; /**< WaitForLockStatus Timeout (counts from start time) */ + s32 m_DemodLockTimeOut; /**< WaitForLockStatus Timeout (counts from start time) */ + + bool m_disableTEIhandling; + + bool m_RfAgcPol; + bool m_IfAgcPol; + + struct SCfgAgc m_atvRfAgcCfg; /**< settings for ATV RF-AGC */ + struct SCfgAgc m_atvIfAgcCfg; /**< settings for ATV IF-AGC */ + struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */ + bool m_phaseCorrectionBypass; + s16 m_atvTopVidPeak; + u16 m_atvTopNoiseTh; + enum EDrxkSifAttenuation m_sifAttenuation; + bool m_enableCVBSOutput; + bool m_enableSIFOutput; + bool m_bMirrorFreqSpect; + enum EDrxkConstellation m_Constellation; /**< Constellation type of the channel */ + u32 m_CurrSymbolRate; /**< Current QAM symbol rate */ + struct SCfgAgc m_qamRfAgcCfg; /**< settings for QAM RF-AGC */ + struct SCfgAgc m_qamIfAgcCfg; /**< settings for QAM IF-AGC */ + u16 m_qamPgaCfg; /**< settings for QAM PGA */ + struct SCfgPreSaw m_qamPreSawCfg; /**< settings for QAM pre SAW sense */ + enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */ + u16 m_fecRsPlen; + u16 m_fecRsPrescale; + + enum DRXKCfgDvbtSqiSpeed m_sqiSpeed; + + u16 m_GPIO; + u16 m_GPIOCfg; + + struct SCfgAgc m_dvbtRfAgcCfg; /**< settings for QAM RF-AGC */ + struct SCfgAgc m_dvbtIfAgcCfg; /**< settings for QAM IF-AGC */ + struct SCfgPreSaw m_dvbtPreSawCfg; /**< settings for QAM pre SAW sense */ + + u16 m_agcFastClipCtrlDelay; + bool m_adcCompPassed; + u16 m_adcCompCoef[64]; + u16 m_adcState; + + u8 *m_microcode; + int m_microcode_length; + bool m_DRXK_A3_ROM_CODE; + bool m_DRXK_A3_PATCH_CODE; + + bool m_rfmirror; + u8 m_deviceSpin; + u32 m_iqmRcRate; + + enum DRXPowerMode m_currentPowerMode; + + /* when true, avoids other devices to use the I2C bus */ + bool drxk_i2c_exclusive_lock; + + /* + * Configurable parameters at the driver. They stores the values found + * at struct drxk_config. + */ + + u16 UIO_mask; /* Bits used by UIO */ + + bool enable_merr_cfg; + bool single_master; + bool no_i2c_bridge; + bool antenna_dvbt; + u16 antenna_gpio; + + fe_status_t fe_status; + + /* Firmware */ + const char *microcode_name; + struct completion fw_wait_load; + const struct firmware *fw; + int qam_demod_parameter_count; +}; + +#define NEVER_LOCK 0 +#define NOT_LOCKED 1 +#define DEMOD_LOCK 2 +#define FEC_LOCK 3 +#define MPEG_LOCK 4 + diff --git a/drivers/media/dvb-frontends/drxk_map.h b/drivers/media/dvb-frontends/drxk_map.h new file mode 100644 index 00000000..761613f9 --- /dev/null +++ b/drivers/media/dvb-frontends/drxk_map.h @@ -0,0 +1,454 @@ +#define AUD_COMM_EXEC__A 0x1000000 +#define AUD_COMM_EXEC_STOP 0x0 +#define FEC_COMM_EXEC__A 0x1C00000 +#define FEC_COMM_EXEC_STOP 0x0 +#define FEC_COMM_EXEC_ACTIVE 0x1 +#define FEC_DI_COMM_EXEC__A 0x1C20000 +#define FEC_DI_COMM_EXEC_STOP 0x0 +#define FEC_DI_INPUT_CTL__A 0x1C20016 +#define FEC_RS_COMM_EXEC__A 0x1C30000 +#define FEC_RS_COMM_EXEC_STOP 0x0 +#define FEC_RS_MEASUREMENT_PERIOD__A 0x1C30012 +#define FEC_RS_MEASUREMENT_PRESCALE__A 0x1C30013 +#define FEC_RS_NR_BIT_ERRORS__A 0x1C30014 +#define FEC_OC_MODE__A 0x1C40011 +#define FEC_OC_MODE_PARITY__M 0x1 +#define FEC_OC_DTO_MODE__A 0x1C40014 +#define FEC_OC_DTO_MODE_DYNAMIC__M 0x1 +#define FEC_OC_DTO_MODE_OFFSET_ENABLE__M 0x4 +#define FEC_OC_DTO_PERIOD__A 0x1C40015 +#define FEC_OC_DTO_BURST_LEN__A 0x1C40018 +#define FEC_OC_FCT_MODE__A 0x1C4001A +#define FEC_OC_FCT_MODE__PRE 0x0 +#define FEC_OC_FCT_MODE_RAT_ENA__M 0x1 +#define FEC_OC_FCT_MODE_VIRT_ENA__M 0x2 +#define FEC_OC_TMD_MODE__A 0x1C4001E +#define FEC_OC_TMD_COUNT__A 0x1C4001F +#define FEC_OC_TMD_HI_MARGIN__A 0x1C40020 +#define FEC_OC_TMD_LO_MARGIN__A 0x1C40021 +#define FEC_OC_TMD_INT_UPD_RATE__A 0x1C40023 +#define FEC_OC_AVR_PARM_A__A 0x1C40026 +#define FEC_OC_AVR_PARM_B__A 0x1C40027 +#define FEC_OC_RCN_GAIN__A 0x1C4002E +#define FEC_OC_RCN_CTL_RATE_LO__A 0x1C40030 +#define FEC_OC_RCN_CTL_STEP_LO__A 0x1C40032 +#define FEC_OC_RCN_CTL_STEP_HI__A 0x1C40033 +#define FEC_OC_SNC_MODE__A 0x1C40040 +#define FEC_OC_SNC_MODE_SHUTDOWN__M 0x10 +#define FEC_OC_SNC_LWM__A 0x1C40041 +#define FEC_OC_SNC_HWM__A 0x1C40042 +#define FEC_OC_SNC_UNLOCK__A 0x1C40043 +#define FEC_OC_SNC_FAIL_PERIOD__A 0x1C40046 +#define FEC_OC_IPR_MODE__A 0x1C40048 +#define FEC_OC_IPR_MODE_SERIAL__M 0x1 +#define FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M 0x4 +#define FEC_OC_IPR_MODE_MVAL_DIS_PAR__M 0x10 +#define FEC_OC_IPR_INVERT__A 0x1C40049 +#define FEC_OC_IPR_INVERT_MD0__M 0x1 +#define FEC_OC_IPR_INVERT_MD1__M 0x2 +#define FEC_OC_IPR_INVERT_MD2__M 0x4 +#define FEC_OC_IPR_INVERT_MD3__M 0x8 +#define FEC_OC_IPR_INVERT_MD4__M 0x10 +#define FEC_OC_IPR_INVERT_MD5__M 0x20 +#define FEC_OC_IPR_INVERT_MD6__M 0x40 +#define FEC_OC_IPR_INVERT_MD7__M 0x80 +#define FEC_OC_IPR_INVERT_MERR__M 0x100 +#define FEC_OC_IPR_INVERT_MSTRT__M 0x200 +#define FEC_OC_IPR_INVERT_MVAL__M 0x400 +#define FEC_OC_IPR_INVERT_MCLK__M 0x800 +#define FEC_OC_OCR_INVERT__A 0x1C40052 +#define IQM_COMM_EXEC__A 0x1800000 +#define IQM_COMM_EXEC_B_STOP 0x0 +#define IQM_COMM_EXEC_B_ACTIVE 0x1 +#define IQM_FS_RATE_OFS_LO__A 0x1820010 +#define IQM_FS_ADJ_SEL__A 0x1820014 +#define IQM_FS_ADJ_SEL_B_OFF 0x0 +#define IQM_FS_ADJ_SEL_B_QAM 0x1 +#define IQM_FS_ADJ_SEL_B_VSB 0x2 +#define IQM_FD_RATESEL__A 0x1830010 +#define IQM_RC_RATE_OFS_LO__A 0x1840010 +#define IQM_RC_RATE_OFS_LO__W 16 +#define IQM_RC_RATE_OFS_LO__M 0xFFFF +#define IQM_RC_RATE_OFS_HI__M 0xFF +#define IQM_RC_ADJ_SEL__A 0x1840014 +#define IQM_RC_ADJ_SEL_B_OFF 0x0 +#define IQM_RC_ADJ_SEL_B_QAM 0x1 +#define IQM_RC_ADJ_SEL_B_VSB 0x2 +#define IQM_RC_STRETCH__A 0x1840016 +#define IQM_CF_COMM_INT_MSK__A 0x1860006 +#define IQM_CF_SYMMETRIC__A 0x1860010 +#define IQM_CF_MIDTAP__A 0x1860011 +#define IQM_CF_MIDTAP_RE__B 0 +#define IQM_CF_MIDTAP_IM__B 1 +#define IQM_CF_OUT_ENA__A 0x1860012 +#define IQM_CF_OUT_ENA_QAM__B 1 +#define IQM_CF_OUT_ENA_OFDM__M 0x4 +#define IQM_CF_ADJ_SEL__A 0x1860013 +#define IQM_CF_SCALE__A 0x1860014 +#define IQM_CF_SCALE_SH__A 0x1860015 +#define IQM_CF_SCALE_SH__PRE 0x0 +#define IQM_CF_POW_MEAS_LEN__A 0x1860017 +#define IQM_CF_DS_ENA__A 0x1860019 +#define IQM_CF_TAP_RE0__A 0x1860020 +#define IQM_CF_TAP_IM0__A 0x1860040 +#define IQM_CF_CLP_VAL__A 0x1860060 +#define IQM_CF_DATATH__A 0x1860061 +#define IQM_CF_PKDTH__A 0x1860062 +#define IQM_CF_WND_LEN__A 0x1860063 +#define IQM_CF_DET_LCT__A 0x1860064 +#define IQM_CF_BYPASSDET__A 0x1860067 +#define IQM_AF_COMM_EXEC__A 0x1870000 +#define IQM_AF_COMM_EXEC_ACTIVE 0x1 +#define IQM_AF_CLKNEG__A 0x1870012 +#define IQM_AF_CLKNEG_CLKNEGDATA__M 0x2 +#define IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS 0x0 +#define IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG 0x2 +#define IQM_AF_START_LOCK__A 0x187001B +#define IQM_AF_PHASE0__A 0x187001C +#define IQM_AF_PHASE1__A 0x187001D +#define IQM_AF_PHASE2__A 0x187001E +#define IQM_AF_CLP_LEN__A 0x1870023 +#define IQM_AF_CLP_TH__A 0x1870024 +#define IQM_AF_SNS_LEN__A 0x1870026 +#define IQM_AF_AGC_IF__A 0x1870028 +#define IQM_AF_AGC_RF__A 0x1870029 +#define IQM_AF_PDREF__A 0x187002B +#define IQM_AF_PDREF__M 0x1F +#define IQM_AF_STDBY__A 0x187002C +#define IQM_AF_STDBY_STDBY_ADC_STANDBY 0x2 +#define IQM_AF_STDBY_STDBY_AMP_STANDBY 0x4 +#define IQM_AF_STDBY_STDBY_PD_STANDBY 0x8 +#define IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY 0x10 +#define IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY 0x20 +#define IQM_AF_AMUX__A 0x187002D +#define IQM_AF_AMUX_SIGNAL2ADC 0x1 +#define IQM_AF_UPD_SEL__A 0x187002F +#define IQM_AF_INC_LCT__A 0x1870034 +#define IQM_AF_INC_BYPASS__A 0x1870036 +#define OFDM_CP_COMM_EXEC__A 0x2800000 +#define OFDM_CP_COMM_EXEC_STOP 0x0 +#define OFDM_EC_SB_PRIOR__A 0x3410013 +#define OFDM_EC_SB_PRIOR_HI 0x0 +#define OFDM_EC_SB_PRIOR_LO 0x1 +#define OFDM_EC_VD_ERR_BIT_CNT__A 0x3420017 +#define OFDM_EC_VD_IN_BIT_CNT__A 0x3420018 +#define OFDM_EQ_TOP_TD_TPS_CONST__A 0x3010054 +#define OFDM_EQ_TOP_TD_TPS_CONST__M 0x3 +#define OFDM_EQ_TOP_TD_TPS_CONST_64QAM 0x2 +#define OFDM_EQ_TOP_TD_TPS_CODE_HP__A 0x3010056 +#define OFDM_EQ_TOP_TD_TPS_CODE_HP__M 0x7 +#define OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8 0x4 +#define OFDM_EQ_TOP_TD_SQR_ERR_I__A 0x301005E +#define OFDM_EQ_TOP_TD_SQR_ERR_Q__A 0x301005F +#define OFDM_EQ_TOP_TD_SQR_ERR_EXP__A 0x3010060 +#define OFDM_EQ_TOP_TD_REQ_SMB_CNT__A 0x3010061 +#define OFDM_EQ_TOP_TD_TPS_PWR_OFS__A 0x3010062 +#define OFDM_LC_COMM_EXEC__A 0x3800000 +#define OFDM_LC_COMM_EXEC_STOP 0x0 +#define OFDM_SC_COMM_EXEC__A 0x3C00000 +#define OFDM_SC_COMM_EXEC_STOP 0x0 +#define OFDM_SC_COMM_STATE__A 0x3C00001 +#define OFDM_SC_RA_RAM_PARAM0__A 0x3C20040 +#define OFDM_SC_RA_RAM_PARAM1__A 0x3C20041 +#define OFDM_SC_RA_RAM_CMD_ADDR__A 0x3C20042 +#define OFDM_SC_RA_RAM_CMD__A 0x3C20043 +#define OFDM_SC_RA_RAM_CMD_NULL 0x0 +#define OFDM_SC_RA_RAM_CMD_PROC_START 0x1 +#define OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM 0x3 +#define OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM 0x4 +#define OFDM_SC_RA_RAM_CMD_GET_OP_PARAM 0x5 +#define OFDM_SC_RA_RAM_CMD_USER_IO 0x6 +#define OFDM_SC_RA_RAM_CMD_SET_TIMER 0x7 +#define OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING 0x8 +#define OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M 0x1 +#define OFDM_SC_RA_RAM_LOCKTRACK_MIN 0x1 +#define OFDM_SC_RA_RAM_OP_PARAM__A 0x3C20048 +#define OFDM_SC_RA_RAM_OP_PARAM_MODE__M 0x3 +#define OFDM_SC_RA_RAM_OP_PARAM_MODE_2K 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_MODE_8K 0x1 +#define OFDM_SC_RA_RAM_OP_PARAM_GUARD_32 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_GUARD_16 0x4 +#define OFDM_SC_RA_RAM_OP_PARAM_GUARD_8 0x8 +#define OFDM_SC_RA_RAM_OP_PARAM_GUARD_4 0xC +#define OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16 0x10 +#define OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64 0x20 +#define OFDM_SC_RA_RAM_OP_PARAM_HIER_NO 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_HIER_A1 0x40 +#define OFDM_SC_RA_RAM_OP_PARAM_HIER_A2 0x80 +#define OFDM_SC_RA_RAM_OP_PARAM_HIER_A4 0xC0 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3 0x200 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4 0x400 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6 0x600 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8 0x800 +#define OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO 0x1000 +#define OFDM_SC_RA_RAM_OP_AUTO_MODE__M 0x1 +#define OFDM_SC_RA_RAM_OP_AUTO_GUARD__M 0x2 +#define OFDM_SC_RA_RAM_OP_AUTO_CONST__M 0x4 +#define OFDM_SC_RA_RAM_OP_AUTO_HIER__M 0x8 +#define OFDM_SC_RA_RAM_OP_AUTO_RATE__M 0x10 +#define OFDM_SC_RA_RAM_LOCK__A 0x3C2004B +#define OFDM_SC_RA_RAM_LOCK_DEMOD__M 0x1 +#define OFDM_SC_RA_RAM_LOCK_FEC__M 0x2 +#define OFDM_SC_RA_RAM_LOCK_MPEG__M 0x4 +#define OFDM_SC_RA_RAM_LOCK_NODVBT__M 0x8 +#define OFDM_SC_RA_RAM_BE_OPT_DELAY__A 0x3C2004D +#define OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A 0x3C2004E +#define OFDM_SC_RA_RAM_ECHO_THRES__A 0x3C2004F +#define OFDM_SC_RA_RAM_ECHO_THRES_8K__B 0 +#define OFDM_SC_RA_RAM_ECHO_THRES_8K__M 0xFF +#define OFDM_SC_RA_RAM_ECHO_THRES_2K__B 8 +#define OFDM_SC_RA_RAM_ECHO_THRES_2K__M 0xFF00 +#define OFDM_SC_RA_RAM_CONFIG__A 0x3C20050 +#define OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M 0x800 +#define OFDM_SC_RA_RAM_FR_THRES_8K__A 0x3C2007D +#define OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A 0x3C200E0 +#define OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A 0x3C200E1 +#define OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A 0x3C200E3 +#define OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A 0x3C200E4 +#define OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A 0x3C200F8 +#define QAM_COMM_EXEC__A 0x1400000 +#define QAM_COMM_EXEC_STOP 0x0 +#define QAM_COMM_EXEC_ACTIVE 0x1 +#define QAM_TOP_ANNEX_A 0x0 +#define QAM_TOP_ANNEX_C 0x2 +#define QAM_SL_ERR_POWER__A 0x1430017 +#define QAM_DQ_QUAL_FUN0__A 0x1440018 +#define QAM_DQ_QUAL_FUN1__A 0x1440019 +#define QAM_DQ_QUAL_FUN2__A 0x144001A +#define QAM_DQ_QUAL_FUN3__A 0x144001B +#define QAM_DQ_QUAL_FUN4__A 0x144001C +#define QAM_DQ_QUAL_FUN5__A 0x144001D +#define QAM_LC_MODE__A 0x1450010 +#define QAM_LC_QUAL_TAB0__A 0x1450018 +#define QAM_LC_QUAL_TAB1__A 0x1450019 +#define QAM_LC_QUAL_TAB2__A 0x145001A +#define QAM_LC_QUAL_TAB3__A 0x145001B +#define QAM_LC_QUAL_TAB4__A 0x145001C +#define QAM_LC_QUAL_TAB5__A 0x145001D +#define QAM_LC_QUAL_TAB6__A 0x145001E +#define QAM_LC_QUAL_TAB8__A 0x145001F +#define QAM_LC_QUAL_TAB9__A 0x1450020 +#define QAM_LC_QUAL_TAB10__A 0x1450021 +#define QAM_LC_QUAL_TAB12__A 0x1450022 +#define QAM_LC_QUAL_TAB15__A 0x1450023 +#define QAM_LC_QUAL_TAB16__A 0x1450024 +#define QAM_LC_QUAL_TAB20__A 0x1450025 +#define QAM_LC_QUAL_TAB25__A 0x1450026 +#define QAM_LC_LPF_FACTORP__A 0x1450028 +#define QAM_LC_LPF_FACTORI__A 0x1450029 +#define QAM_LC_RATE_LIMIT__A 0x145002A +#define QAM_LC_SYMBOL_FREQ__A 0x145002B +#define QAM_SY_TIMEOUT__A 0x1470011 +#define QAM_SY_TIMEOUT__PRE 0x3A98 +#define QAM_SY_SYNC_LWM__A 0x1470012 +#define QAM_SY_SYNC_AWM__A 0x1470013 +#define QAM_SY_SYNC_HWM__A 0x1470014 +#define QAM_SY_SP_INV__A 0x1470017 +#define QAM_SY_SP_INV_SPECTRUM_INV_DIS 0x0 +#define SCU_COMM_EXEC__A 0x800000 +#define SCU_COMM_EXEC_STOP 0x0 +#define SCU_COMM_EXEC_ACTIVE 0x1 +#define SCU_COMM_EXEC_HOLD 0x2 +#define SCU_RAM_DRIVER_DEBUG__A 0x831EBF +#define SCU_RAM_QAM_FSM_STEP_PERIOD__A 0x831EC4 +#define SCU_RAM_GPIO__A 0x831EC7 +#define SCU_RAM_GPIO_HW_LOCK_IND_DISABLE 0x0 +#define SCU_RAM_AGC_CLP_CTRL_MODE__A 0x831EC8 +#define SCU_RAM_FEC_ACCUM_PKT_FAILURES__A 0x831ECB +#define SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A 0x831F05 +#define SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A 0x831F15 +#define SCU_RAM_AGC_KI_CYCLEN__A 0x831F17 +#define SCU_RAM_AGC_SNS_CYCLEN__A 0x831F18 +#define SCU_RAM_AGC_RF_SNS_DEV_MAX__A 0x831F19 +#define SCU_RAM_AGC_RF_SNS_DEV_MIN__A 0x831F1A +#define SCU_RAM_AGC_RF_MAX__A 0x831F1B +#define SCU_RAM_AGC_CONFIG__A 0x831F24 +#define SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M 0x1 +#define SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M 0x2 +#define SCU_RAM_AGC_CONFIG_INV_IF_POL__M 0x100 +#define SCU_RAM_AGC_CONFIG_INV_RF_POL__M 0x200 +#define SCU_RAM_AGC_KI__A 0x831F25 +#define SCU_RAM_AGC_KI_RF__B 4 +#define SCU_RAM_AGC_KI_RF__M 0xF0 +#define SCU_RAM_AGC_KI_IF__B 8 +#define SCU_RAM_AGC_KI_IF__M 0xF00 +#define SCU_RAM_AGC_KI_RED__A 0x831F26 +#define SCU_RAM_AGC_KI_RED_RAGC_RED__B 2 +#define SCU_RAM_AGC_KI_RED_RAGC_RED__M 0xC +#define SCU_RAM_AGC_KI_RED_IAGC_RED__B 4 +#define SCU_RAM_AGC_KI_RED_IAGC_RED__M 0x30 +#define SCU_RAM_AGC_KI_INNERGAIN_MIN__A 0x831F27 +#define SCU_RAM_AGC_KI_MINGAIN__A 0x831F28 +#define SCU_RAM_AGC_KI_MAXGAIN__A 0x831F29 +#define SCU_RAM_AGC_KI_MAXMINGAIN_TH__A 0x831F2A +#define SCU_RAM_AGC_KI_MIN__A 0x831F2B +#define SCU_RAM_AGC_KI_MAX__A 0x831F2C +#define SCU_RAM_AGC_CLP_SUM__A 0x831F2D +#define SCU_RAM_AGC_CLP_SUM_MIN__A 0x831F2E +#define SCU_RAM_AGC_CLP_SUM_MAX__A 0x831F2F +#define SCU_RAM_AGC_CLP_CYCLEN__A 0x831F30 +#define SCU_RAM_AGC_CLP_CYCCNT__A 0x831F31 +#define SCU_RAM_AGC_CLP_DIR_TO__A 0x831F32 +#define SCU_RAM_AGC_CLP_DIR_WD__A 0x831F33 +#define SCU_RAM_AGC_CLP_DIR_STP__A 0x831F34 +#define SCU_RAM_AGC_SNS_SUM__A 0x831F35 +#define SCU_RAM_AGC_SNS_SUM_MIN__A 0x831F36 +#define SCU_RAM_AGC_SNS_SUM_MAX__A 0x831F37 +#define SCU_RAM_AGC_SNS_CYCCNT__A 0x831F38 +#define SCU_RAM_AGC_SNS_DIR_TO__A 0x831F39 +#define SCU_RAM_AGC_SNS_DIR_WD__A 0x831F3A +#define SCU_RAM_AGC_SNS_DIR_STP__A 0x831F3B +#define SCU_RAM_AGC_INGAIN_TGT__A 0x831F3D +#define SCU_RAM_AGC_INGAIN_TGT_MIN__A 0x831F3E +#define SCU_RAM_AGC_INGAIN_TGT_MAX__A 0x831F3F +#define SCU_RAM_AGC_IF_IACCU_HI__A 0x831F40 +#define SCU_RAM_AGC_IF_IACCU_LO__A 0x831F41 +#define SCU_RAM_AGC_IF_IACCU_HI_TGT__A 0x831F42 +#define SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A 0x831F43 +#define SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A 0x831F44 +#define SCU_RAM_AGC_RF_IACCU_HI__A 0x831F45 +#define SCU_RAM_AGC_RF_IACCU_LO__A 0x831F46 +#define SCU_RAM_AGC_RF_IACCU_HI_CO__A 0x831F47 +#define SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A 0x831F84 +#define SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A 0x831F85 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A 0x831F86 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A 0x831F87 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A 0x831F88 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A 0x831F89 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A 0x831F8A +#define SCU_RAM_QAM_FSM_RTH__A 0x831F8E +#define SCU_RAM_QAM_FSM_FTH__A 0x831F8F +#define SCU_RAM_QAM_FSM_PTH__A 0x831F90 +#define SCU_RAM_QAM_FSM_MTH__A 0x831F91 +#define SCU_RAM_QAM_FSM_CTH__A 0x831F92 +#define SCU_RAM_QAM_FSM_QTH__A 0x831F93 +#define SCU_RAM_QAM_FSM_RATE_LIM__A 0x831F94 +#define SCU_RAM_QAM_FSM_FREQ_LIM__A 0x831F95 +#define SCU_RAM_QAM_FSM_COUNT_LIM__A 0x831F96 +#define SCU_RAM_QAM_LC_CA_COARSE__A 0x831F97 +#define SCU_RAM_QAM_LC_CA_FINE__A 0x831F99 +#define SCU_RAM_QAM_LC_CP_COARSE__A 0x831F9A +#define SCU_RAM_QAM_LC_CP_MEDIUM__A 0x831F9B +#define SCU_RAM_QAM_LC_CP_FINE__A 0x831F9C +#define SCU_RAM_QAM_LC_CI_COARSE__A 0x831F9D +#define SCU_RAM_QAM_LC_CI_MEDIUM__A 0x831F9E +#define SCU_RAM_QAM_LC_CI_FINE__A 0x831F9F +#define SCU_RAM_QAM_LC_EP_COARSE__A 0x831FA0 +#define SCU_RAM_QAM_LC_EP_MEDIUM__A 0x831FA1 +#define SCU_RAM_QAM_LC_EP_FINE__A 0x831FA2 +#define SCU_RAM_QAM_LC_EI_COARSE__A 0x831FA3 +#define SCU_RAM_QAM_LC_EI_MEDIUM__A 0x831FA4 +#define SCU_RAM_QAM_LC_EI_FINE__A 0x831FA5 +#define SCU_RAM_QAM_LC_CF_COARSE__A 0x831FA6 +#define SCU_RAM_QAM_LC_CF_MEDIUM__A 0x831FA7 +#define SCU_RAM_QAM_LC_CF_FINE__A 0x831FA8 +#define SCU_RAM_QAM_LC_CF1_COARSE__A 0x831FA9 +#define SCU_RAM_QAM_LC_CF1_MEDIUM__A 0x831FAA +#define SCU_RAM_QAM_LC_CF1_FINE__A 0x831FAB +#define SCU_RAM_QAM_SL_SIG_POWER__A 0x831FAC +#define SCU_RAM_QAM_EQ_CMA_RAD0__A 0x831FAD +#define SCU_RAM_QAM_EQ_CMA_RAD1__A 0x831FAE +#define SCU_RAM_QAM_EQ_CMA_RAD2__A 0x831FAF +#define SCU_RAM_QAM_EQ_CMA_RAD3__A 0x831FB0 +#define SCU_RAM_QAM_EQ_CMA_RAD4__A 0x831FB1 +#define SCU_RAM_QAM_EQ_CMA_RAD5__A 0x831FB2 +#define SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED 0x4000 +#define SCU_RAM_QAM_LOCKED_LOCKED_LOCKED 0x8000 +#define SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK 0xC000 +#define SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A 0x831FEA +#define SCU_RAM_DRIVER_VER_HI__A 0x831FEB +#define SCU_RAM_DRIVER_VER_LO__A 0x831FEC +#define SCU_RAM_PARAM_15__A 0x831FED +#define SCU_RAM_PARAM_0__A 0x831FFC +#define SCU_RAM_COMMAND__A 0x831FFD +#define SCU_RAM_COMMAND_CMD_DEMOD_RESET 0x1 +#define SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV 0x2 +#define SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM 0x3 +#define SCU_RAM_COMMAND_CMD_DEMOD_START 0x4 +#define SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK 0x5 +#define SCU_RAM_COMMAND_CMD_DEMOD_STOP 0x9 +#define SCU_RAM_COMMAND_STANDARD_QAM 0x200 +#define SCU_RAM_COMMAND_STANDARD_OFDM 0x400 +#define SIO_TOP_COMM_KEY__A 0x41000F +#define SIO_TOP_COMM_KEY_KEY 0xFABA +#define SIO_TOP_JTAGID_LO__A 0x410012 +#define SIO_HI_RA_RAM_RES__A 0x420031 +#define SIO_HI_RA_RAM_CMD__A 0x420032 +#define SIO_HI_RA_RAM_CMD_RESET 0x2 +#define SIO_HI_RA_RAM_CMD_CONFIG 0x3 +#define SIO_HI_RA_RAM_CMD_BRDCTRL 0x7 +#define SIO_HI_RA_RAM_PAR_1__A 0x420033 +#define SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY 0x3945 +#define SIO_HI_RA_RAM_PAR_2__A 0x420034 +#define SIO_HI_RA_RAM_PAR_2_CFG_DIV__M 0x7F +#define SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN 0x0 +#define SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED 0x4 +#define SIO_HI_RA_RAM_PAR_3__A 0x420035 +#define SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M 0x7F +#define SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B 7 +#define SIO_HI_RA_RAM_PAR_3_ACP_RW_READ 0x0 +#define SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE 0x8 +#define SIO_HI_RA_RAM_PAR_4__A 0x420036 +#define SIO_HI_RA_RAM_PAR_5__A 0x420037 +#define SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE 0x1 +#define SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M 0x8 +#define SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ 0x8 +#define SIO_HI_RA_RAM_PAR_6__A 0x420038 +#define SIO_CC_PLL_LOCK__A 0x450012 +#define SIO_CC_PWD_MODE__A 0x450015 +#define SIO_CC_PWD_MODE_LEVEL_NONE 0x0 +#define SIO_CC_PWD_MODE_LEVEL_OFDM 0x1 +#define SIO_CC_PWD_MODE_LEVEL_CLOCK 0x2 +#define SIO_CC_PWD_MODE_LEVEL_PLL 0x3 +#define SIO_CC_PWD_MODE_LEVEL_OSC 0x4 +#define SIO_CC_SOFT_RST__A 0x450016 +#define SIO_CC_SOFT_RST_OFDM__M 0x1 +#define SIO_CC_SOFT_RST_SYS__M 0x2 +#define SIO_CC_SOFT_RST_OSC__M 0x4 +#define SIO_CC_UPDATE__A 0x450017 +#define SIO_CC_UPDATE_KEY 0xFABA +#define SIO_OFDM_SH_OFDM_RING_ENABLE__A 0x470010 +#define SIO_OFDM_SH_OFDM_RING_ENABLE_OFF 0x0 +#define SIO_OFDM_SH_OFDM_RING_ENABLE_ON 0x1 +#define SIO_OFDM_SH_OFDM_RING_STATUS__A 0x470012 +#define SIO_OFDM_SH_OFDM_RING_STATUS_DOWN 0x0 +#define SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED 0x1 +#define SIO_BL_COMM_EXEC__A 0x480000 +#define SIO_BL_COMM_EXEC_ACTIVE 0x1 +#define SIO_BL_STATUS__A 0x480010 +#define SIO_BL_MODE__A 0x480011 +#define SIO_BL_MODE_DIRECT 0x0 +#define SIO_BL_MODE_CHAIN 0x1 +#define SIO_BL_ENABLE__A 0x480012 +#define SIO_BL_ENABLE_ON 0x1 +#define SIO_BL_TGT_HDR__A 0x480014 +#define SIO_BL_TGT_ADDR__A 0x480015 +#define SIO_BL_SRC_ADDR__A 0x480016 +#define SIO_BL_SRC_LEN__A 0x480017 +#define SIO_BL_CHAIN_ADDR__A 0x480018 +#define SIO_BL_CHAIN_LEN__A 0x480019 +#define SIO_PDR_MON_CFG__A 0x7F0010 +#define SIO_PDR_UIO_IN_HI__A 0x7F0015 +#define SIO_PDR_UIO_OUT_LO__A 0x7F0016 +#define SIO_PDR_OHW_CFG__A 0x7F001F +#define SIO_PDR_OHW_CFG_FREF_SEL__M 0x3 +#define SIO_PDR_GPIO_CFG__A 0x7F0021 +#define SIO_PDR_MSTRT_CFG__A 0x7F0025 +#define SIO_PDR_MERR_CFG__A 0x7F0026 +#define SIO_PDR_MCLK_CFG__A 0x7F0028 +#define SIO_PDR_MCLK_CFG_DRIVE__B 3 +#define SIO_PDR_MVAL_CFG__A 0x7F0029 +#define SIO_PDR_MD0_CFG__A 0x7F002A +#define SIO_PDR_MD0_CFG_DRIVE__B 3 +#define SIO_PDR_MD1_CFG__A 0x7F002B +#define SIO_PDR_MD2_CFG__A 0x7F002C +#define SIO_PDR_MD3_CFG__A 0x7F002D +#define SIO_PDR_MD4_CFG__A 0x7F002F +#define SIO_PDR_MD5_CFG__A 0x7F0030 +#define SIO_PDR_MD6_CFG__A 0x7F0031 +#define SIO_PDR_MD7_CFG__A 0x7F0032 +#define SIO_PDR_SMA_RX_CFG__A 0x7F0037 +#define SIO_PDR_SMA_TX_CFG__A 0x7F0038 diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c new file mode 100644 index 00000000..22e8c203 --- /dev/null +++ b/drivers/media/dvb-frontends/ds3000.c @@ -0,0 +1,1141 @@ +/* + Montage Technology DS3000 - DVBS/S2 Demodulator driver + Copyright (C) 2009-2012 Konstantin Dimitrov + + Copyright (C) 2009-2012 TurboSight.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "ts2020.h" +#include "ds3000.h" + +static int debug; + +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(args); \ + } while (0) + +/* as of March 2009 current DS3000 firmware version is 1.78 */ +/* DS3000 FW v1.78 MD5: a32d17910c4f370073f9346e71d34b80 */ +#define DS3000_DEFAULT_FIRMWARE "dvb-fe-ds3000.fw" + +#define DS3000_SAMPLE_RATE 96000 /* in kHz */ + +/* Register values to initialise the demod in DVB-S mode */ +static u8 ds3000_dvbs_init_tab[] = { + 0x23, 0x05, + 0x08, 0x03, + 0x0c, 0x00, + 0x21, 0x54, + 0x25, 0x82, + 0x27, 0x31, + 0x30, 0x08, + 0x31, 0x40, + 0x32, 0x32, + 0x33, 0x35, + 0x35, 0xff, + 0x3a, 0x00, + 0x37, 0x10, + 0x38, 0x10, + 0x39, 0x02, + 0x42, 0x60, + 0x4a, 0x40, + 0x4b, 0x04, + 0x4d, 0x91, + 0x5d, 0xc8, + 0x50, 0x77, + 0x51, 0x77, + 0x52, 0x36, + 0x53, 0x36, + 0x56, 0x01, + 0x63, 0x43, + 0x64, 0x30, + 0x65, 0x40, + 0x68, 0x26, + 0x69, 0x4c, + 0x70, 0x20, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0x40, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0x60, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0x80, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0xa0, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0x1f, + 0x76, 0x00, + 0x77, 0xd1, + 0x78, 0x0c, + 0x79, 0x80, + 0x7f, 0x04, + 0x7c, 0x00, + 0x80, 0x86, + 0x81, 0xa6, + 0x85, 0x04, + 0xcd, 0xf4, + 0x90, 0x33, + 0xa0, 0x44, + 0xc0, 0x18, + 0xc3, 0x10, + 0xc4, 0x08, + 0xc5, 0x80, + 0xc6, 0x80, + 0xc7, 0x0a, + 0xc8, 0x1a, + 0xc9, 0x80, + 0xfe, 0x92, + 0xe0, 0xf8, + 0xe6, 0x8b, + 0xd0, 0x40, + 0xf8, 0x20, + 0xfa, 0x0f, + 0xfd, 0x20, + 0xad, 0x20, + 0xae, 0x07, + 0xb8, 0x00, +}; + +/* Register values to initialise the demod in DVB-S2 mode */ +static u8 ds3000_dvbs2_init_tab[] = { + 0x23, 0x0f, + 0x08, 0x07, + 0x0c, 0x00, + 0x21, 0x54, + 0x25, 0x82, + 0x27, 0x31, + 0x30, 0x08, + 0x31, 0x32, + 0x32, 0x32, + 0x33, 0x35, + 0x35, 0xff, + 0x3a, 0x00, + 0x37, 0x10, + 0x38, 0x10, + 0x39, 0x02, + 0x42, 0x60, + 0x4a, 0x80, + 0x4b, 0x04, + 0x4d, 0x81, + 0x5d, 0x88, + 0x50, 0x36, + 0x51, 0x36, + 0x52, 0x36, + 0x53, 0x36, + 0x63, 0x60, + 0x64, 0x10, + 0x65, 0x10, + 0x68, 0x04, + 0x69, 0x29, + 0x70, 0x20, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0x40, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0x60, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0x80, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0xa0, + 0x71, 0x70, + 0x72, 0x04, + 0x73, 0x00, + 0x70, 0x1f, + 0xa0, 0x44, + 0xc0, 0x08, + 0xc1, 0x10, + 0xc2, 0x08, + 0xc3, 0x10, + 0xc4, 0x08, + 0xc5, 0xf0, + 0xc6, 0xf0, + 0xc7, 0x0a, + 0xc8, 0x1a, + 0xc9, 0x80, + 0xca, 0x23, + 0xcb, 0x24, + 0xce, 0x74, + 0x90, 0x03, + 0x76, 0x80, + 0x77, 0x42, + 0x78, 0x0a, + 0x79, 0x80, + 0xad, 0x40, + 0xae, 0x07, + 0x7f, 0xd4, + 0x7c, 0x00, + 0x80, 0xa8, + 0x81, 0xda, + 0x7c, 0x01, + 0x80, 0xda, + 0x81, 0xec, + 0x7c, 0x02, + 0x80, 0xca, + 0x81, 0xeb, + 0x7c, 0x03, + 0x80, 0xba, + 0x81, 0xdb, + 0x85, 0x08, + 0x86, 0x00, + 0x87, 0x02, + 0x89, 0x80, + 0x8b, 0x44, + 0x8c, 0xaa, + 0x8a, 0x10, + 0xba, 0x00, + 0xf5, 0x04, + 0xfe, 0x44, + 0xd2, 0x32, + 0xb8, 0x00, +}; + +struct ds3000_state { + struct i2c_adapter *i2c; + const struct ds3000_config *config; + struct dvb_frontend frontend; + /* previous uncorrected block counter for DVB-S2 */ + u16 prevUCBS2; +}; + +static int ds3000_writereg(struct ds3000_state *state, int reg, int data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = 0, .buf = buf, .len = 2 }; + int err; + + dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data); + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x," + " value == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +static int ds3000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct ds3000_state *state = fe->demodulator_priv; + + if (enable) + ds3000_writereg(state, 0x03, 0x12); + else + ds3000_writereg(state, 0x03, 0x02); + + return 0; +} + +/* I2C write for 8k firmware load */ +static int ds3000_writeFW(struct ds3000_state *state, int reg, + const u8 *data, u16 len) +{ + int i, ret = 0; + struct i2c_msg msg; + u8 *buf; + + buf = kmalloc(33, GFP_KERNEL); + if (buf == NULL) { + printk(KERN_ERR "Unable to kmalloc\n"); + return -ENOMEM; + } + + *(buf) = reg; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.buf = buf; + msg.len = 33; + + for (i = 0; i < len; i += 32) { + memcpy(buf + 1, data + i, 32); + + dprintk("%s: write reg 0x%02x, len = %d\n", __func__, reg, len); + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) { + printk(KERN_ERR "%s: write error(err == %i, " + "reg == 0x%02x\n", __func__, ret, reg); + ret = -EREMOTEIO; + goto error; + } + } + ret = 0; + +error: + kfree(buf); + + return ret; +} + +static int ds3000_readreg(struct ds3000_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret); + return ret; + } + + dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]); + + return b1[0]; +} + +static int ds3000_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw); + +static int ds3000_firmware_ondemand(struct dvb_frontend *fe) +{ + struct ds3000_state *state = fe->demodulator_priv; + const struct firmware *fw; + int ret = 0; + + dprintk("%s()\n", __func__); + + ret = ds3000_readreg(state, 0xb2); + if (ret < 0) + return ret; + + /* Load firmware */ + /* request the firmware, this will block until someone uploads it */ + printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__, + DS3000_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE, + state->i2c->dev.parent); + printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__); + if (ret) { + printk(KERN_ERR "%s: No firmware uploaded (timeout or file not " + "found?)\n", __func__); + return ret; + } + + ret = ds3000_load_firmware(fe, fw); + if (ret) + printk("%s: Writing firmware to device failed\n", __func__); + + release_firmware(fw); + + dprintk("%s: Firmware upload %s\n", __func__, + ret == 0 ? "complete" : "failed"); + + return ret; +} + +static int ds3000_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw) +{ + struct ds3000_state *state = fe->demodulator_priv; + int ret = 0; + + dprintk("%s\n", __func__); + dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n", + fw->size, + fw->data[0], + fw->data[1], + fw->data[fw->size - 2], + fw->data[fw->size - 1]); + + /* Begin the firmware load process */ + ds3000_writereg(state, 0xb2, 0x01); + /* write the entire firmware */ + ret = ds3000_writeFW(state, 0xb0, fw->data, fw->size); + ds3000_writereg(state, 0xb2, 0x00); + + return ret; +} + +static int ds3000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct ds3000_state *state = fe->demodulator_priv; + u8 data; + + dprintk("%s(%d)\n", __func__, voltage); + + data = ds3000_readreg(state, 0xa2); + data |= 0x03; /* bit0 V/H, bit1 off/on */ + + switch (voltage) { + case SEC_VOLTAGE_18: + data &= ~0x03; + break; + case SEC_VOLTAGE_13: + data &= ~0x03; + data |= 0x01; + break; + case SEC_VOLTAGE_OFF: + break; + } + + ds3000_writereg(state, 0xa2, data); + + return 0; +} + +static int ds3000_read_status(struct dvb_frontend *fe, fe_status_t* status) +{ + struct ds3000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int lock; + + *status = 0; + + switch (c->delivery_system) { + case SYS_DVBS: + lock = ds3000_readreg(state, 0xd1); + if ((lock & 0x07) == 0x07) + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | + FE_HAS_LOCK; + + break; + case SYS_DVBS2: + lock = ds3000_readreg(state, 0x0d); + if ((lock & 0x8f) == 0x8f) + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | + FE_HAS_LOCK; + + break; + default: + return 1; + } + + if (state->config->set_lock_led) + state->config->set_lock_led(fe, *status == 0 ? 0 : 1); + + dprintk("%s: status = 0x%02x\n", __func__, lock); + + return 0; +} + +/* read DS3000 BER value */ +static int ds3000_read_ber(struct dvb_frontend *fe, u32* ber) +{ + struct ds3000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 data; + u32 ber_reading, lpdc_frames; + + dprintk("%s()\n", __func__); + + switch (c->delivery_system) { + case SYS_DVBS: + /* set the number of bytes checked during + BER estimation */ + ds3000_writereg(state, 0xf9, 0x04); + /* read BER estimation status */ + data = ds3000_readreg(state, 0xf8); + /* check if BER estimation is ready */ + if ((data & 0x10) == 0) { + /* this is the number of error bits, + to calculate the bit error rate + divide to 8388608 */ + *ber = (ds3000_readreg(state, 0xf7) << 8) | + ds3000_readreg(state, 0xf6); + /* start counting error bits */ + /* need to be set twice + otherwise it fails sometimes */ + data |= 0x10; + ds3000_writereg(state, 0xf8, data); + ds3000_writereg(state, 0xf8, data); + } else + /* used to indicate that BER estimation + is not ready, i.e. BER is unknown */ + *ber = 0xffffffff; + break; + case SYS_DVBS2: + /* read the number of LPDC decoded frames */ + lpdc_frames = (ds3000_readreg(state, 0xd7) << 16) | + (ds3000_readreg(state, 0xd6) << 8) | + ds3000_readreg(state, 0xd5); + /* read the number of packets with bad CRC */ + ber_reading = (ds3000_readreg(state, 0xf8) << 8) | + ds3000_readreg(state, 0xf7); + if (lpdc_frames > 750) { + /* clear LPDC frame counters */ + ds3000_writereg(state, 0xd1, 0x01); + /* clear bad packets counter */ + ds3000_writereg(state, 0xf9, 0x01); + /* enable bad packets counter */ + ds3000_writereg(state, 0xf9, 0x00); + /* enable LPDC frame counters */ + ds3000_writereg(state, 0xd1, 0x00); + *ber = ber_reading; + } else + /* used to indicate that BER estimation is not ready, + i.e. BER is unknown */ + *ber = 0xffffffff; + break; + default: + return 1; + } + + return 0; +} + +static int ds3000_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + if (fe->ops.tuner_ops.get_rf_strength) + fe->ops.tuner_ops.get_rf_strength(fe, signal_strength); + + return 0; +} + +/* calculate DS3000 snr value in dB */ +static int ds3000_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct ds3000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 snr_reading, snr_value; + u32 dvbs2_signal_reading, dvbs2_noise_reading, tmp; + static const u16 dvbs_snr_tab[] = { /* 20 x Table (rounded up) */ + 0x0000, 0x1b13, 0x2aea, 0x3627, 0x3ede, 0x45fe, 0x4c03, + 0x513a, 0x55d4, 0x59f2, 0x5dab, 0x6111, 0x6431, 0x6717, + 0x69c9, 0x6c4e, 0x6eac, 0x70e8, 0x7304, 0x7505 + }; + static const u16 dvbs2_snr_tab[] = { /* 80 x Table (rounded up) */ + 0x0000, 0x0bc2, 0x12a3, 0x1785, 0x1b4e, 0x1e65, 0x2103, + 0x2347, 0x2546, 0x2710, 0x28ae, 0x2a28, 0x2b83, 0x2cc5, + 0x2df1, 0x2f09, 0x3010, 0x3109, 0x31f4, 0x32d2, 0x33a6, + 0x3470, 0x3531, 0x35ea, 0x369b, 0x3746, 0x37ea, 0x3888, + 0x3920, 0x39b3, 0x3a42, 0x3acc, 0x3b51, 0x3bd3, 0x3c51, + 0x3ccb, 0x3d42, 0x3db6, 0x3e27, 0x3e95, 0x3f00, 0x3f68, + 0x3fcf, 0x4033, 0x4094, 0x40f4, 0x4151, 0x41ac, 0x4206, + 0x425e, 0x42b4, 0x4308, 0x435b, 0x43ac, 0x43fc, 0x444a, + 0x4497, 0x44e2, 0x452d, 0x4576, 0x45bd, 0x4604, 0x4649, + 0x468e, 0x46d1, 0x4713, 0x4755, 0x4795, 0x47d4, 0x4813, + 0x4851, 0x488d, 0x48c9, 0x4904, 0x493f, 0x4978, 0x49b1, + 0x49e9, 0x4a20, 0x4a57 + }; + + dprintk("%s()\n", __func__); + + switch (c->delivery_system) { + case SYS_DVBS: + snr_reading = ds3000_readreg(state, 0xff); + snr_reading /= 8; + if (snr_reading == 0) + *snr = 0x0000; + else { + if (snr_reading > 20) + snr_reading = 20; + snr_value = dvbs_snr_tab[snr_reading - 1] * 10 / 23026; + /* cook the value to be suitable for szap-s2 + human readable output */ + *snr = snr_value * 8 * 655; + } + dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, + snr_reading, *snr); + break; + case SYS_DVBS2: + dvbs2_noise_reading = (ds3000_readreg(state, 0x8c) & 0x3f) + + (ds3000_readreg(state, 0x8d) << 4); + dvbs2_signal_reading = ds3000_readreg(state, 0x8e); + tmp = dvbs2_signal_reading * dvbs2_signal_reading >> 1; + if (tmp == 0) { + *snr = 0x0000; + return 0; + } + if (dvbs2_noise_reading == 0) { + snr_value = 0x0013; + /* cook the value to be suitable for szap-s2 + human readable output */ + *snr = 0xffff; + return 0; + } + if (tmp > dvbs2_noise_reading) { + snr_reading = tmp / dvbs2_noise_reading; + if (snr_reading > 80) + snr_reading = 80; + snr_value = dvbs2_snr_tab[snr_reading - 1] / 1000; + /* cook the value to be suitable for szap-s2 + human readable output */ + *snr = snr_value * 5 * 655; + } else { + snr_reading = dvbs2_noise_reading / tmp; + if (snr_reading > 80) + snr_reading = 80; + *snr = -(dvbs2_snr_tab[snr_reading] / 1000); + } + dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, + snr_reading, *snr); + break; + default: + return 1; + } + + return 0; +} + +/* read DS3000 uncorrected blocks */ +static int ds3000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct ds3000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 data; + u16 _ucblocks; + + dprintk("%s()\n", __func__); + + switch (c->delivery_system) { + case SYS_DVBS: + *ucblocks = (ds3000_readreg(state, 0xf5) << 8) | + ds3000_readreg(state, 0xf4); + data = ds3000_readreg(state, 0xf8); + /* clear packet counters */ + data &= ~0x20; + ds3000_writereg(state, 0xf8, data); + /* enable packet counters */ + data |= 0x20; + ds3000_writereg(state, 0xf8, data); + break; + case SYS_DVBS2: + _ucblocks = (ds3000_readreg(state, 0xe2) << 8) | + ds3000_readreg(state, 0xe1); + if (_ucblocks > state->prevUCBS2) + *ucblocks = _ucblocks - state->prevUCBS2; + else + *ucblocks = state->prevUCBS2 - _ucblocks; + state->prevUCBS2 = _ucblocks; + break; + default: + return 1; + } + + return 0; +} + +static int ds3000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct ds3000_state *state = fe->demodulator_priv; + u8 data; + + dprintk("%s(%d)\n", __func__, tone); + if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { + printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone); + return -EINVAL; + } + + data = ds3000_readreg(state, 0xa2); + data &= ~0xc0; + ds3000_writereg(state, 0xa2, data); + + switch (tone) { + case SEC_TONE_ON: + dprintk("%s: setting tone on\n", __func__); + data = ds3000_readreg(state, 0xa1); + data &= ~0x43; + data |= 0x04; + ds3000_writereg(state, 0xa1, data); + break; + case SEC_TONE_OFF: + dprintk("%s: setting tone off\n", __func__); + data = ds3000_readreg(state, 0xa2); + data |= 0x80; + ds3000_writereg(state, 0xa2, data); + break; + } + + return 0; +} + +static int ds3000_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *d) +{ + struct ds3000_state *state = fe->demodulator_priv; + int i; + u8 data; + + /* Dump DiSEqC message */ + dprintk("%s(", __func__); + for (i = 0 ; i < d->msg_len;) { + dprintk("0x%02x", d->msg[i]); + if (++i < d->msg_len) + dprintk(", "); + } + + /* enable DiSEqC message send pin */ + data = ds3000_readreg(state, 0xa2); + data &= ~0xc0; + ds3000_writereg(state, 0xa2, data); + + /* DiSEqC message */ + for (i = 0; i < d->msg_len; i++) + ds3000_writereg(state, 0xa3 + i, d->msg[i]); + + data = ds3000_readreg(state, 0xa1); + /* clear DiSEqC message length and status, + enable DiSEqC message send */ + data &= ~0xf8; + /* set DiSEqC mode, modulation active during 33 pulses, + set DiSEqC message length */ + data |= ((d->msg_len - 1) << 3) | 0x07; + ds3000_writereg(state, 0xa1, data); + + /* wait up to 150ms for DiSEqC transmission to complete */ + for (i = 0; i < 15; i++) { + data = ds3000_readreg(state, 0xa1); + if ((data & 0x40) == 0) + break; + msleep(10); + } + + /* DiSEqC timeout after 150ms */ + if (i == 15) { + data = ds3000_readreg(state, 0xa1); + data &= ~0x80; + data |= 0x40; + ds3000_writereg(state, 0xa1, data); + + data = ds3000_readreg(state, 0xa2); + data &= ~0xc0; + data |= 0x80; + ds3000_writereg(state, 0xa2, data); + + return 1; + } + + data = ds3000_readreg(state, 0xa2); + data &= ~0xc0; + data |= 0x80; + ds3000_writereg(state, 0xa2, data); + + return 0; +} + +/* Send DiSEqC burst */ +static int ds3000_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct ds3000_state *state = fe->demodulator_priv; + int i; + u8 data; + + dprintk("%s()\n", __func__); + + data = ds3000_readreg(state, 0xa2); + data &= ~0xc0; + ds3000_writereg(state, 0xa2, data); + + /* DiSEqC burst */ + if (burst == SEC_MINI_A) + /* Unmodulated tone burst */ + ds3000_writereg(state, 0xa1, 0x02); + else if (burst == SEC_MINI_B) + /* Modulated tone burst */ + ds3000_writereg(state, 0xa1, 0x01); + else + return -EINVAL; + + msleep(13); + for (i = 0; i < 5; i++) { + data = ds3000_readreg(state, 0xa1); + if ((data & 0x40) == 0) + break; + msleep(1); + } + + if (i == 5) { + data = ds3000_readreg(state, 0xa1); + data &= ~0x80; + data |= 0x40; + ds3000_writereg(state, 0xa1, data); + + data = ds3000_readreg(state, 0xa2); + data &= ~0xc0; + data |= 0x80; + ds3000_writereg(state, 0xa2, data); + + return 1; + } + + data = ds3000_readreg(state, 0xa2); + data &= ~0xc0; + data |= 0x80; + ds3000_writereg(state, 0xa2, data); + + return 0; +} + +static void ds3000_release(struct dvb_frontend *fe) +{ + struct ds3000_state *state = fe->demodulator_priv; + + if (state->config->set_lock_led) + state->config->set_lock_led(fe, 0); + + dprintk("%s\n", __func__); + kfree(state); +} + +static struct dvb_frontend_ops ds3000_ops; + +struct dvb_frontend *ds3000_attach(const struct ds3000_config *config, + struct i2c_adapter *i2c) +{ + struct ds3000_state *state = NULL; + int ret; + + dprintk("%s\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct ds3000_state), GFP_KERNEL); + if (state == NULL) { + printk(KERN_ERR "Unable to kmalloc\n"); + goto error2; + } + + state->config = config; + state->i2c = i2c; + state->prevUCBS2 = 0; + + /* check if the demod is present */ + ret = ds3000_readreg(state, 0x00) & 0xfe; + if (ret != 0xe0) { + printk(KERN_ERR "Invalid probe, probably not a DS3000\n"); + goto error3; + } + + printk(KERN_INFO "DS3000 chip version: %d.%d attached.\n", + ds3000_readreg(state, 0x02), + ds3000_readreg(state, 0x01)); + + memcpy(&state->frontend.ops, &ds3000_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + /* + * Some devices like T480 starts with voltage on. Be sure + * to turn voltage off during init, as this can otherwise + * interfere with Unicable SCR systems. + */ + ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF); + return &state->frontend; + +error3: + kfree(state); +error2: + return NULL; +} +EXPORT_SYMBOL(ds3000_attach); + +static int ds3000_set_carrier_offset(struct dvb_frontend *fe, + s32 carrier_offset_khz) +{ + struct ds3000_state *state = fe->demodulator_priv; + s32 tmp; + + tmp = carrier_offset_khz; + tmp *= 65536; + tmp = (2 * tmp + DS3000_SAMPLE_RATE) / (2 * DS3000_SAMPLE_RATE); + + if (tmp < 0) + tmp += 65536; + + ds3000_writereg(state, 0x5f, tmp >> 8); + ds3000_writereg(state, 0x5e, tmp & 0xff); + + return 0; +} + +static int ds3000_set_frontend(struct dvb_frontend *fe) +{ + struct ds3000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + int i; + fe_status_t status; + s32 offset_khz; + u32 frequency; + u16 value; + + dprintk("%s() ", __func__); + + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + /* Tune */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* ds3000 global reset */ + ds3000_writereg(state, 0x07, 0x80); + ds3000_writereg(state, 0x07, 0x00); + /* ds3000 build-in uC reset */ + ds3000_writereg(state, 0xb2, 0x01); + /* ds3000 software reset */ + ds3000_writereg(state, 0x00, 0x01); + + switch (c->delivery_system) { + case SYS_DVBS: + /* initialise the demod in DVB-S mode */ + for (i = 0; i < sizeof(ds3000_dvbs_init_tab); i += 2) + ds3000_writereg(state, + ds3000_dvbs_init_tab[i], + ds3000_dvbs_init_tab[i + 1]); + value = ds3000_readreg(state, 0xfe); + value &= 0xc0; + value |= 0x1b; + ds3000_writereg(state, 0xfe, value); + break; + case SYS_DVBS2: + /* initialise the demod in DVB-S2 mode */ + for (i = 0; i < sizeof(ds3000_dvbs2_init_tab); i += 2) + ds3000_writereg(state, + ds3000_dvbs2_init_tab[i], + ds3000_dvbs2_init_tab[i + 1]); + if (c->symbol_rate >= 30000000) + ds3000_writereg(state, 0xfe, 0x54); + else + ds3000_writereg(state, 0xfe, 0x98); + break; + default: + return 1; + } + + /* enable 27MHz clock output */ + ds3000_writereg(state, 0x29, 0x80); + /* enable ac coupling */ + ds3000_writereg(state, 0x25, 0x8a); + + /* enhance symbol rate performance */ + if ((c->symbol_rate / 1000) <= 5000) { + value = 29777 / (c->symbol_rate / 1000) + 1; + if (value % 2 != 0) + value++; + ds3000_writereg(state, 0xc3, 0x0d); + ds3000_writereg(state, 0xc8, value); + ds3000_writereg(state, 0xc4, 0x10); + ds3000_writereg(state, 0xc7, 0x0e); + } else if ((c->symbol_rate / 1000) <= 10000) { + value = 92166 / (c->symbol_rate / 1000) + 1; + if (value % 2 != 0) + value++; + ds3000_writereg(state, 0xc3, 0x07); + ds3000_writereg(state, 0xc8, value); + ds3000_writereg(state, 0xc4, 0x09); + ds3000_writereg(state, 0xc7, 0x12); + } else if ((c->symbol_rate / 1000) <= 20000) { + value = 64516 / (c->symbol_rate / 1000) + 1; + ds3000_writereg(state, 0xc3, value); + ds3000_writereg(state, 0xc8, 0x0e); + ds3000_writereg(state, 0xc4, 0x07); + ds3000_writereg(state, 0xc7, 0x18); + } else { + value = 129032 / (c->symbol_rate / 1000) + 1; + ds3000_writereg(state, 0xc3, value); + ds3000_writereg(state, 0xc8, 0x0a); + ds3000_writereg(state, 0xc4, 0x05); + ds3000_writereg(state, 0xc7, 0x24); + } + + /* normalized symbol rate rounded to the closest integer */ + value = (((c->symbol_rate / 1000) << 16) + + (DS3000_SAMPLE_RATE / 2)) / DS3000_SAMPLE_RATE; + ds3000_writereg(state, 0x61, value & 0x00ff); + ds3000_writereg(state, 0x62, (value & 0xff00) >> 8); + + /* co-channel interference cancellation disabled */ + ds3000_writereg(state, 0x56, 0x00); + + /* equalizer disabled */ + ds3000_writereg(state, 0x76, 0x00); + + /*ds3000_writereg(state, 0x08, 0x03); + ds3000_writereg(state, 0xfd, 0x22); + ds3000_writereg(state, 0x08, 0x07); + ds3000_writereg(state, 0xfd, 0x42); + ds3000_writereg(state, 0x08, 0x07);*/ + + if (state->config->ci_mode) { + switch (c->delivery_system) { + case SYS_DVBS: + default: + ds3000_writereg(state, 0xfd, 0x80); + break; + case SYS_DVBS2: + ds3000_writereg(state, 0xfd, 0x01); + break; + } + } + + /* ds3000 out of software reset */ + ds3000_writereg(state, 0x00, 0x00); + /* start ds3000 build-in uC */ + ds3000_writereg(state, 0xb2, 0x00); + + if (fe->ops.tuner_ops.get_frequency) { + fe->ops.tuner_ops.get_frequency(fe, &frequency); + offset_khz = frequency - c->frequency; + ds3000_set_carrier_offset(fe, offset_khz); + } + + for (i = 0; i < 30 ; i++) { + ds3000_read_status(fe, &status); + if (status & FE_HAS_LOCK) + break; + + msleep(10); + } + + return 0; +} + +static int ds3000_tune(struct dvb_frontend *fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + fe_status_t *status) +{ + if (re_tune) { + int ret = ds3000_set_frontend(fe); + if (ret) + return ret; + } + + *delay = HZ / 5; + + return ds3000_read_status(fe, status); +} + +static enum dvbfe_algo ds3000_get_algo(struct dvb_frontend *fe) +{ + struct ds3000_state *state = fe->demodulator_priv; + + if (state->config->set_lock_led) + state->config->set_lock_led(fe, 0); + + dprintk("%s()\n", __func__); + return DVBFE_ALGO_HW; +} + +/* + * Initialise or wake up device + * + * Power config will reset and load initial firmware if required + */ +static int ds3000_initfe(struct dvb_frontend *fe) +{ + struct ds3000_state *state = fe->demodulator_priv; + int ret; + + dprintk("%s()\n", __func__); + /* hard reset */ + ds3000_writereg(state, 0x08, 0x01 | ds3000_readreg(state, 0x08)); + msleep(1); + + /* Load the firmware if required */ + ret = ds3000_firmware_ondemand(fe); + if (ret != 0) { + printk(KERN_ERR "%s: Unable initialize firmware\n", __func__); + return ret; + } + + return 0; +} + +static struct dvb_frontend_ops ds3000_ops = { + .delsys = { SYS_DVBS, SYS_DVBS2 }, + .info = { + .name = "Montage Technology DS3000", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1011, /* kHz for QPSK frontends */ + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_2G_MODULATION | + FE_CAN_QPSK | FE_CAN_RECOVER + }, + + .release = ds3000_release, + + .init = ds3000_initfe, + .i2c_gate_ctrl = ds3000_i2c_gate_ctrl, + .read_status = ds3000_read_status, + .read_ber = ds3000_read_ber, + .read_signal_strength = ds3000_read_signal_strength, + .read_snr = ds3000_read_snr, + .read_ucblocks = ds3000_read_ucblocks, + .set_voltage = ds3000_set_voltage, + .set_tone = ds3000_set_tone, + .diseqc_send_master_cmd = ds3000_send_diseqc_msg, + .diseqc_send_burst = ds3000_diseqc_send_burst, + .get_frontend_algo = ds3000_get_algo, + + .set_frontend = ds3000_set_frontend, + .tune = ds3000_tune, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + +MODULE_DESCRIPTION("DVB Frontend module for Montage Technology " + "DS3000 hardware"); +MODULE_AUTHOR("Konstantin Dimitrov "); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(DS3000_DEFAULT_FIRMWARE); diff --git a/drivers/media/dvb-frontends/ds3000.h b/drivers/media/dvb-frontends/ds3000.h new file mode 100644 index 00000000..f9c21fb7 --- /dev/null +++ b/drivers/media/dvb-frontends/ds3000.h @@ -0,0 +1,50 @@ +/* + Montage Technology DS3000 - DVBS/S2 Demodulator driver + Copyright (C) 2009-2012 Konstantin Dimitrov + + Copyright (C) 2009-2012 TurboSight.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef DS3000_H +#define DS3000_H + +#include +#include + +struct ds3000_config { + /* the demodulator's i2c address */ + u8 demod_address; + u8 ci_mode; + /* Set device param to start dma */ + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); + /* Hook for Lock LED */ + void (*set_lock_led)(struct dvb_frontend *fe, int offon); +}; + +#if IS_ENABLED(CONFIG_DVB_DS3000) +extern struct dvb_frontend *ds3000_attach(const struct ds3000_config *config, + struct i2c_adapter *i2c); +#else +static inline +struct dvb_frontend *ds3000_attach(const struct ds3000_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_DS3000 */ +#endif /* DS3000_H */ diff --git a/drivers/media/dvb-frontends/dvb-pll.c b/drivers/media/dvb-frontends/dvb-pll.c new file mode 100644 index 00000000..6d8fe884 --- /dev/null +++ b/drivers/media/dvb-frontends/dvb-pll.c @@ -0,0 +1,820 @@ +/* + * descriptions + helper functions for simple dvb plls. + * + * (c) 2004 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "dvb-pll.h" + +struct dvb_pll_priv { + /* pll number */ + int nr; + + /* i2c details */ + int pll_i2c_address; + struct i2c_adapter *i2c; + + /* the PLL descriptor */ + struct dvb_pll_desc *pll_desc; + + /* cached frequency/bandwidth */ + u32 frequency; + u32 bandwidth; +}; + +#define DVB_PLL_MAX 64 + +static unsigned int dvb_pll_devcount; + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable verbose debug messages"); + +static unsigned int id[DVB_PLL_MAX] = + { [ 0 ... (DVB_PLL_MAX-1) ] = DVB_PLL_UNDEFINED }; +module_param_array(id, int, NULL, 0644); +MODULE_PARM_DESC(id, "force pll id to use (DEBUG ONLY)"); + +/* ----------------------------------------------------------- */ + +struct dvb_pll_desc { + char *name; + u32 min; + u32 max; + u32 iffreq; + void (*set)(struct dvb_frontend *fe, u8 *buf); + u8 *initdata; + u8 *initdata2; + u8 *sleepdata; + int count; + struct { + u32 limit; + u32 stepsize; + u8 config; + u8 cb; + } entries[12]; +}; + +/* ----------------------------------------------------------- */ +/* descriptions */ + +static struct dvb_pll_desc dvb_pll_thomson_dtt7579 = { + .name = "Thomson dtt7579", + .min = 177000000, + .max = 858000000, + .iffreq= 36166667, + .sleepdata = (u8[]){ 2, 0xb4, 0x03 }, + .count = 4, + .entries = { + { 443250000, 166667, 0xb4, 0x02 }, + { 542000000, 166667, 0xb4, 0x08 }, + { 771000000, 166667, 0xbc, 0x08 }, + { 999999999, 166667, 0xf4, 0x08 }, + }, +}; + +static void thomson_dtt759x_bw(struct dvb_frontend *fe, u8 *buf) +{ + u32 bw = fe->dtv_property_cache.bandwidth_hz; + if (bw == 7000000) + buf[3] |= 0x10; +} + +static struct dvb_pll_desc dvb_pll_thomson_dtt759x = { + .name = "Thomson dtt759x", + .min = 177000000, + .max = 896000000, + .set = thomson_dtt759x_bw, + .iffreq= 36166667, + .sleepdata = (u8[]){ 2, 0x84, 0x03 }, + .count = 5, + .entries = { + { 264000000, 166667, 0xb4, 0x02 }, + { 470000000, 166667, 0xbc, 0x02 }, + { 735000000, 166667, 0xbc, 0x08 }, + { 835000000, 166667, 0xf4, 0x08 }, + { 999999999, 166667, 0xfc, 0x08 }, + }, +}; + +static void thomson_dtt7520x_bw(struct dvb_frontend *fe, u8 *buf) +{ + u32 bw = fe->dtv_property_cache.bandwidth_hz; + if (bw == 8000000) + buf[3] ^= 0x10; +} + +static struct dvb_pll_desc dvb_pll_thomson_dtt7520x = { + .name = "Thomson dtt7520x", + .min = 185000000, + .max = 900000000, + .set = thomson_dtt7520x_bw, + .iffreq = 36166667, + .count = 7, + .entries = { + { 305000000, 166667, 0xb4, 0x12 }, + { 405000000, 166667, 0xbc, 0x12 }, + { 445000000, 166667, 0xbc, 0x12 }, + { 465000000, 166667, 0xf4, 0x18 }, + { 735000000, 166667, 0xfc, 0x18 }, + { 835000000, 166667, 0xbc, 0x18 }, + { 999999999, 166667, 0xfc, 0x18 }, + }, +}; + +static struct dvb_pll_desc dvb_pll_lg_z201 = { + .name = "LG z201", + .min = 174000000, + .max = 862000000, + .iffreq= 36166667, + .sleepdata = (u8[]){ 2, 0xbc, 0x03 }, + .count = 5, + .entries = { + { 157500000, 166667, 0xbc, 0x01 }, + { 443250000, 166667, 0xbc, 0x02 }, + { 542000000, 166667, 0xbc, 0x04 }, + { 830000000, 166667, 0xf4, 0x04 }, + { 999999999, 166667, 0xfc, 0x04 }, + }, +}; + +static struct dvb_pll_desc dvb_pll_unknown_1 = { + .name = "unknown 1", /* used by dntv live dvb-t */ + .min = 174000000, + .max = 862000000, + .iffreq= 36166667, + .count = 9, + .entries = { + { 150000000, 166667, 0xb4, 0x01 }, + { 173000000, 166667, 0xbc, 0x01 }, + { 250000000, 166667, 0xb4, 0x02 }, + { 400000000, 166667, 0xbc, 0x02 }, + { 420000000, 166667, 0xf4, 0x02 }, + { 470000000, 166667, 0xfc, 0x02 }, + { 600000000, 166667, 0xbc, 0x08 }, + { 730000000, 166667, 0xf4, 0x08 }, + { 999999999, 166667, 0xfc, 0x08 }, + }, +}; + +/* Infineon TUA6010XS + * used in Thomson Cable Tuner + */ +static struct dvb_pll_desc dvb_pll_tua6010xs = { + .name = "Infineon TUA6010XS", + .min = 44250000, + .max = 858000000, + .iffreq= 36125000, + .count = 3, + .entries = { + { 115750000, 62500, 0x8e, 0x03 }, + { 403250000, 62500, 0x8e, 0x06 }, + { 999999999, 62500, 0x8e, 0x85 }, + }, +}; + +/* Panasonic env57h1xd5 (some Philips PLL ?) */ +static struct dvb_pll_desc dvb_pll_env57h1xd5 = { + .name = "Panasonic ENV57H1XD5", + .min = 44250000, + .max = 858000000, + .iffreq= 36125000, + .count = 4, + .entries = { + { 153000000, 166667, 0xc2, 0x41 }, + { 470000000, 166667, 0xc2, 0x42 }, + { 526000000, 166667, 0xc2, 0x84 }, + { 999999999, 166667, 0xc2, 0xa4 }, + }, +}; + +/* Philips TDA6650/TDA6651 + * used in Panasonic ENV77H11D5 + */ +static void tda665x_bw(struct dvb_frontend *fe, u8 *buf) +{ + u32 bw = fe->dtv_property_cache.bandwidth_hz; + if (bw == 8000000) + buf[3] |= 0x08; +} + +static struct dvb_pll_desc dvb_pll_tda665x = { + .name = "Philips TDA6650/TDA6651", + .min = 44250000, + .max = 858000000, + .set = tda665x_bw, + .iffreq= 36166667, + .initdata = (u8[]){ 4, 0x0b, 0xf5, 0x85, 0xab }, + .count = 12, + .entries = { + { 93834000, 166667, 0xca, 0x61 /* 011 0 0 0 01 */ }, + { 123834000, 166667, 0xca, 0xa1 /* 101 0 0 0 01 */ }, + { 161000000, 166667, 0xca, 0xa1 /* 101 0 0 0 01 */ }, + { 163834000, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ }, + { 253834000, 166667, 0xca, 0x62 /* 011 0 0 0 10 */ }, + { 383834000, 166667, 0xca, 0xa2 /* 101 0 0 0 10 */ }, + { 443834000, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ }, + { 444000000, 166667, 0xca, 0xc4 /* 110 0 0 1 00 */ }, + { 583834000, 166667, 0xca, 0x64 /* 011 0 0 1 00 */ }, + { 793834000, 166667, 0xca, 0xa4 /* 101 0 0 1 00 */ }, + { 444834000, 166667, 0xca, 0xc4 /* 110 0 0 1 00 */ }, + { 861000000, 166667, 0xca, 0xe4 /* 111 0 0 1 00 */ }, + } +}; + +/* Infineon TUA6034 + * used in LG TDTP E102P + */ +static void tua6034_bw(struct dvb_frontend *fe, u8 *buf) +{ + u32 bw = fe->dtv_property_cache.bandwidth_hz; + if (bw == 7000000) + buf[3] |= 0x08; +} + +static struct dvb_pll_desc dvb_pll_tua6034 = { + .name = "Infineon TUA6034", + .min = 44250000, + .max = 858000000, + .iffreq= 36166667, + .count = 3, + .set = tua6034_bw, + .entries = { + { 174500000, 62500, 0xce, 0x01 }, + { 230000000, 62500, 0xce, 0x02 }, + { 999999999, 62500, 0xce, 0x04 }, + }, +}; + +/* ALPS TDED4 + * used in Nebula-Cards and USB boxes + */ +static void tded4_bw(struct dvb_frontend *fe, u8 *buf) +{ + u32 bw = fe->dtv_property_cache.bandwidth_hz; + if (bw == 8000000) + buf[3] |= 0x04; +} + +static struct dvb_pll_desc dvb_pll_tded4 = { + .name = "ALPS TDED4", + .min = 47000000, + .max = 863000000, + .iffreq= 36166667, + .set = tded4_bw, + .count = 4, + .entries = { + { 153000000, 166667, 0x85, 0x01 }, + { 470000000, 166667, 0x85, 0x02 }, + { 823000000, 166667, 0x85, 0x08 }, + { 999999999, 166667, 0x85, 0x88 }, + } +}; + +/* ALPS TDHU2 + * used in AverTVHD MCE A180 + */ +static struct dvb_pll_desc dvb_pll_tdhu2 = { + .name = "ALPS TDHU2", + .min = 54000000, + .max = 864000000, + .iffreq= 44000000, + .count = 4, + .entries = { + { 162000000, 62500, 0x85, 0x01 }, + { 426000000, 62500, 0x85, 0x02 }, + { 782000000, 62500, 0x85, 0x08 }, + { 999999999, 62500, 0x85, 0x88 }, + } +}; + +/* Samsung TBMV30111IN / TBMV30712IN1 + * used in Air2PC ATSC - 2nd generation (nxt2002) + */ +static struct dvb_pll_desc dvb_pll_samsung_tbmv = { + .name = "Samsung TBMV30111IN / TBMV30712IN1", + .min = 54000000, + .max = 860000000, + .iffreq= 44000000, + .count = 6, + .entries = { + { 172000000, 166667, 0xb4, 0x01 }, + { 214000000, 166667, 0xb4, 0x02 }, + { 467000000, 166667, 0xbc, 0x02 }, + { 721000000, 166667, 0xbc, 0x08 }, + { 841000000, 166667, 0xf4, 0x08 }, + { 999999999, 166667, 0xfc, 0x02 }, + } +}; + +/* + * Philips SD1878 Tuner. + */ +static struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = { + .name = "Philips SD1878", + .min = 950000, + .max = 2150000, + .iffreq= 249, /* zero-IF, offset 249 is to round up */ + .count = 4, + .entries = { + { 1250000, 500, 0xc4, 0x00}, + { 1450000, 500, 0xc4, 0x40}, + { 2050000, 500, 0xc4, 0x80}, + { 2150000, 500, 0xc4, 0xc0}, + }, +}; + +static void opera1_bw(struct dvb_frontend *fe, u8 *buf) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_pll_priv *priv = fe->tuner_priv; + u32 b_w = (c->symbol_rate * 27) / 32000; + struct i2c_msg msg = { + .addr = priv->pll_i2c_address, + .flags = 0, + .buf = buf, + .len = 4 + }; + int result; + u8 lpf; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + result = i2c_transfer(priv->i2c, &msg, 1); + if (result != 1) + printk(KERN_ERR "%s: i2c_transfer failed:%d", + __func__, result); + + if (b_w <= 10000) + lpf = 0xc; + else if (b_w <= 12000) + lpf = 0x2; + else if (b_w <= 14000) + lpf = 0xa; + else if (b_w <= 16000) + lpf = 0x6; + else if (b_w <= 18000) + lpf = 0xe; + else if (b_w <= 20000) + lpf = 0x1; + else if (b_w <= 22000) + lpf = 0x9; + else if (b_w <= 24000) + lpf = 0x5; + else if (b_w <= 26000) + lpf = 0xd; + else if (b_w <= 28000) + lpf = 0x3; + else + lpf = 0xb; + buf[2] ^= 0x1c; /* Flip bits 3-5 */ + /* Set lpf */ + buf[2] |= ((lpf >> 2) & 0x3) << 3; + buf[3] |= (lpf & 0x3) << 2; + + return; +} + +static struct dvb_pll_desc dvb_pll_opera1 = { + .name = "Opera Tuner", + .min = 900000, + .max = 2250000, + .initdata = (u8[]){ 4, 0x08, 0xe5, 0xe1, 0x00 }, + .initdata2 = (u8[]){ 4, 0x08, 0xe5, 0xe5, 0x00 }, + .iffreq= 0, + .set = opera1_bw, + .count = 8, + .entries = { + { 1064000, 500, 0xf9, 0xc2 }, + { 1169000, 500, 0xf9, 0xe2 }, + { 1299000, 500, 0xf9, 0x20 }, + { 1444000, 500, 0xf9, 0x40 }, + { 1606000, 500, 0xf9, 0x60 }, + { 1777000, 500, 0xf9, 0x80 }, + { 1941000, 500, 0xf9, 0xa0 }, + { 2250000, 500, 0xf9, 0xc0 }, + } +}; + +static void samsung_dtos403ih102a_set(struct dvb_frontend *fe, u8 *buf) +{ + struct dvb_pll_priv *priv = fe->tuner_priv; + struct i2c_msg msg = { + .addr = priv->pll_i2c_address, + .flags = 0, + .buf = buf, + .len = 4 + }; + int result; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + result = i2c_transfer(priv->i2c, &msg, 1); + if (result != 1) + printk(KERN_ERR "%s: i2c_transfer failed:%d", + __func__, result); + + buf[2] = 0x9e; + buf[3] = 0x90; + + return; +} + +/* unknown pll used in Samsung DTOS403IH102A DVB-C tuner */ +static struct dvb_pll_desc dvb_pll_samsung_dtos403ih102a = { + .name = "Samsung DTOS403IH102A", + .min = 44250000, + .max = 858000000, + .iffreq = 36125000, + .count = 8, + .set = samsung_dtos403ih102a_set, + .entries = { + { 135000000, 62500, 0xbe, 0x01 }, + { 177000000, 62500, 0xf6, 0x01 }, + { 370000000, 62500, 0xbe, 0x02 }, + { 450000000, 62500, 0xf6, 0x02 }, + { 466000000, 62500, 0xfe, 0x02 }, + { 538000000, 62500, 0xbe, 0x08 }, + { 826000000, 62500, 0xf6, 0x08 }, + { 999999999, 62500, 0xfe, 0x08 }, + } +}; + +/* Samsung TDTC9251DH0 DVB-T NIM, as used on AirStar 2 */ +static struct dvb_pll_desc dvb_pll_samsung_tdtc9251dh0 = { + .name = "Samsung TDTC9251DH0", + .min = 48000000, + .max = 863000000, + .iffreq = 36166667, + .count = 3, + .entries = { + { 157500000, 166667, 0xcc, 0x09 }, + { 443000000, 166667, 0xcc, 0x0a }, + { 863000000, 166667, 0xcc, 0x08 }, + } +}; + +/* Samsung TBDU18132 DVB-S NIM with TSA5059 PLL, used in SkyStar2 DVB-S 2.3 */ +static struct dvb_pll_desc dvb_pll_samsung_tbdu18132 = { + .name = "Samsung TBDU18132", + .min = 950000, + .max = 2150000, /* guesses */ + .iffreq = 0, + .count = 2, + .entries = { + { 1550000, 125, 0x84, 0x82 }, + { 4095937, 125, 0x84, 0x80 }, + } + /* TSA5059 PLL has a 17 bit divisor rather than the 15 bits supported + * by this driver. The two extra bits are 0x60 in the third byte. 15 + * bits is enough for over 4 GHz, which is enough to cover the range + * of this tuner. We could use the additional divisor bits by adding + * more entries, e.g. + { 0x0ffff * 125 + 125/2, 125, 0x84 | 0x20, }, + { 0x17fff * 125 + 125/2, 125, 0x84 | 0x40, }, + { 0x1ffff * 125 + 125/2, 125, 0x84 | 0x60, }, */ +}; + +/* Samsung TBMU24112 DVB-S NIM with SL1935 zero-IF tuner */ +static struct dvb_pll_desc dvb_pll_samsung_tbmu24112 = { + .name = "Samsung TBMU24112", + .min = 950000, + .max = 2150000, /* guesses */ + .iffreq = 0, + .count = 2, + .entries = { + { 1500000, 125, 0x84, 0x18 }, + { 9999999, 125, 0x84, 0x08 }, + } +}; + +/* Alps TDEE4 DVB-C NIM, used on Cablestar 2 */ +/* byte 4 : 1 * * AGD R3 R2 R1 R0 + * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1 + * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 + * Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5 + * 47 - 153 0 * 0 0 0 0 0 1 0x01 + * 153 - 430 0 * 0 0 0 0 1 0 0x02 + * 430 - 822 0 * 0 0 1 0 0 0 0x08 + * 822 - 862 1 * 0 0 1 0 0 0 0x88 */ +static struct dvb_pll_desc dvb_pll_alps_tdee4 = { + .name = "ALPS TDEE4", + .min = 47000000, + .max = 862000000, + .iffreq = 36125000, + .count = 4, + .entries = { + { 153000000, 62500, 0x95, 0x01 }, + { 430000000, 62500, 0x95, 0x02 }, + { 822000000, 62500, 0x95, 0x08 }, + { 999999999, 62500, 0x95, 0x88 }, + } +}; + +/* ----------------------------------------------------------- */ + +static struct dvb_pll_desc *pll_list[] = { + [DVB_PLL_UNDEFINED] = NULL, + [DVB_PLL_THOMSON_DTT7579] = &dvb_pll_thomson_dtt7579, + [DVB_PLL_THOMSON_DTT759X] = &dvb_pll_thomson_dtt759x, + [DVB_PLL_THOMSON_DTT7520X] = &dvb_pll_thomson_dtt7520x, + [DVB_PLL_LG_Z201] = &dvb_pll_lg_z201, + [DVB_PLL_UNKNOWN_1] = &dvb_pll_unknown_1, + [DVB_PLL_TUA6010XS] = &dvb_pll_tua6010xs, + [DVB_PLL_ENV57H1XD5] = &dvb_pll_env57h1xd5, + [DVB_PLL_TUA6034] = &dvb_pll_tua6034, + [DVB_PLL_TDA665X] = &dvb_pll_tda665x, + [DVB_PLL_TDED4] = &dvb_pll_tded4, + [DVB_PLL_TDEE4] = &dvb_pll_alps_tdee4, + [DVB_PLL_TDHU2] = &dvb_pll_tdhu2, + [DVB_PLL_SAMSUNG_TBMV] = &dvb_pll_samsung_tbmv, + [DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261, + [DVB_PLL_OPERA1] = &dvb_pll_opera1, + [DVB_PLL_SAMSUNG_DTOS403IH102A] = &dvb_pll_samsung_dtos403ih102a, + [DVB_PLL_SAMSUNG_TDTC9251DH0] = &dvb_pll_samsung_tdtc9251dh0, + [DVB_PLL_SAMSUNG_TBDU18132] = &dvb_pll_samsung_tbdu18132, + [DVB_PLL_SAMSUNG_TBMU24112] = &dvb_pll_samsung_tbmu24112, +}; + +/* ----------------------------------------------------------- */ +/* code */ + +static int dvb_pll_configure(struct dvb_frontend *fe, u8 *buf, + const u32 frequency) +{ + struct dvb_pll_priv *priv = fe->tuner_priv; + struct dvb_pll_desc *desc = priv->pll_desc; + u32 div; + int i; + + if (frequency && (frequency < desc->min || frequency > desc->max)) + return -EINVAL; + + for (i = 0; i < desc->count; i++) { + if (frequency > desc->entries[i].limit) + continue; + break; + } + + if (debug) + printk("pll: %s: freq=%d | i=%d/%d\n", desc->name, + frequency, i, desc->count); + if (i == desc->count) + return -EINVAL; + + div = (frequency + desc->iffreq + + desc->entries[i].stepsize/2) / desc->entries[i].stepsize; + buf[0] = div >> 8; + buf[1] = div & 0xff; + buf[2] = desc->entries[i].config; + buf[3] = desc->entries[i].cb; + + if (desc->set) + desc->set(fe, buf); + + if (debug) + printk("pll: %s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n", + desc->name, div, buf[0], buf[1], buf[2], buf[3]); + + // calculate the frequency we set it to + return (div * desc->entries[i].stepsize) - desc->iffreq; +} + +static int dvb_pll_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int dvb_pll_sleep(struct dvb_frontend *fe) +{ + struct dvb_pll_priv *priv = fe->tuner_priv; + + if (priv->i2c == NULL) + return -EINVAL; + + if (priv->pll_desc->sleepdata) { + struct i2c_msg msg = { .flags = 0, + .addr = priv->pll_i2c_address, + .buf = priv->pll_desc->sleepdata + 1, + .len = priv->pll_desc->sleepdata[0] }; + + int result; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) { + return result; + } + return 0; + } + /* Shouldn't be called when initdata is NULL, maybe BUG()? */ + return -EINVAL; +} + +static int dvb_pll_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_pll_priv *priv = fe->tuner_priv; + u8 buf[4]; + struct i2c_msg msg = + { .addr = priv->pll_i2c_address, .flags = 0, + .buf = buf, .len = sizeof(buf) }; + int result; + u32 frequency = 0; + + if (priv->i2c == NULL) + return -EINVAL; + + result = dvb_pll_configure(fe, buf, c->frequency); + if (result < 0) + return result; + else + frequency = result; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) { + return result; + } + + priv->frequency = frequency; + priv->bandwidth = c->bandwidth_hz; + + return 0; +} + +static int dvb_pll_calc_regs(struct dvb_frontend *fe, + u8 *buf, int buf_len) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_pll_priv *priv = fe->tuner_priv; + int result; + u32 frequency = 0; + + if (buf_len < 5) + return -EINVAL; + + result = dvb_pll_configure(fe, buf + 1, c->frequency); + if (result < 0) + return result; + else + frequency = result; + + buf[0] = priv->pll_i2c_address; + + priv->frequency = frequency; + priv->bandwidth = c->bandwidth_hz; + + return 5; +} + +static int dvb_pll_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct dvb_pll_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static int dvb_pll_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct dvb_pll_priv *priv = fe->tuner_priv; + *bandwidth = priv->bandwidth; + return 0; +} + +static int dvb_pll_init(struct dvb_frontend *fe) +{ + struct dvb_pll_priv *priv = fe->tuner_priv; + + if (priv->i2c == NULL) + return -EINVAL; + + if (priv->pll_desc->initdata) { + struct i2c_msg msg = { .flags = 0, + .addr = priv->pll_i2c_address, + .buf = priv->pll_desc->initdata + 1, + .len = priv->pll_desc->initdata[0] }; + + int result; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + result = i2c_transfer(priv->i2c, &msg, 1); + if (result != 1) + return result; + if (priv->pll_desc->initdata2) { + msg.buf = priv->pll_desc->initdata2 + 1; + msg.len = priv->pll_desc->initdata2[0]; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + result = i2c_transfer(priv->i2c, &msg, 1); + if (result != 1) + return result; + } + return 0; + } + /* Shouldn't be called when initdata is NULL, maybe BUG()? */ + return -EINVAL; +} + +static struct dvb_tuner_ops dvb_pll_tuner_ops = { + .release = dvb_pll_release, + .sleep = dvb_pll_sleep, + .init = dvb_pll_init, + .set_params = dvb_pll_set_params, + .calc_regs = dvb_pll_calc_regs, + .get_frequency = dvb_pll_get_frequency, + .get_bandwidth = dvb_pll_get_bandwidth, +}; + +struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, + struct i2c_adapter *i2c, + unsigned int pll_desc_id) +{ + u8 b1 [] = { 0 }; + struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD, + .buf = b1, .len = 1 }; + struct dvb_pll_priv *priv = NULL; + int ret; + struct dvb_pll_desc *desc; + + if ((id[dvb_pll_devcount] > DVB_PLL_UNDEFINED) && + (id[dvb_pll_devcount] < ARRAY_SIZE(pll_list))) + pll_desc_id = id[dvb_pll_devcount]; + + BUG_ON(pll_desc_id < 1 || pll_desc_id >= ARRAY_SIZE(pll_list)); + + desc = pll_list[pll_desc_id]; + + if (i2c != NULL) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer (i2c, &msg, 1); + if (ret != 1) + return NULL; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + priv = kzalloc(sizeof(struct dvb_pll_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->pll_i2c_address = pll_addr; + priv->i2c = i2c; + priv->pll_desc = desc; + priv->nr = dvb_pll_devcount++; + + memcpy(&fe->ops.tuner_ops, &dvb_pll_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + strncpy(fe->ops.tuner_ops.info.name, desc->name, + sizeof(fe->ops.tuner_ops.info.name)); + fe->ops.tuner_ops.info.frequency_min = desc->min; + fe->ops.tuner_ops.info.frequency_max = desc->max; + if (!desc->initdata) + fe->ops.tuner_ops.init = NULL; + if (!desc->sleepdata) + fe->ops.tuner_ops.sleep = NULL; + + fe->tuner_priv = priv; + + if ((debug) || (id[priv->nr] == pll_desc_id)) { + printk("dvb-pll[%d]", priv->nr); + if (i2c != NULL) + printk(" %d-%04x", i2c_adapter_id(i2c), pll_addr); + printk(": id# %d (%s) attached, %s\n", pll_desc_id, desc->name, + id[priv->nr] == pll_desc_id ? + "insmod option" : "autodetected"); + } + + return fe; +} +EXPORT_SYMBOL(dvb_pll_attach); + +MODULE_DESCRIPTION("dvb pll library"); +MODULE_AUTHOR("Gerd Knorr"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/dvb-pll.h b/drivers/media/dvb-frontends/dvb-pll.h new file mode 100644 index 00000000..f4b5a060 --- /dev/null +++ b/drivers/media/dvb-frontends/dvb-pll.h @@ -0,0 +1,57 @@ +/* + * descriptions + helper functions for simple dvb plls. + */ + +#ifndef __DVB_PLL_H__ +#define __DVB_PLL_H__ + +#include +#include "dvb_frontend.h" + +#define DVB_PLL_UNDEFINED 0 +#define DVB_PLL_THOMSON_DTT7579 1 +#define DVB_PLL_THOMSON_DTT759X 2 +#define DVB_PLL_LG_Z201 3 +#define DVB_PLL_UNKNOWN_1 4 +#define DVB_PLL_TUA6010XS 5 +#define DVB_PLL_ENV57H1XD5 6 +#define DVB_PLL_TUA6034 7 +#define DVB_PLL_TDA665X 8 +#define DVB_PLL_TDED4 9 +#define DVB_PLL_TDHU2 10 +#define DVB_PLL_SAMSUNG_TBMV 11 +#define DVB_PLL_PHILIPS_SD1878_TDA8261 12 +#define DVB_PLL_OPERA1 13 +#define DVB_PLL_SAMSUNG_DTOS403IH102A 14 +#define DVB_PLL_SAMSUNG_TDTC9251DH0 15 +#define DVB_PLL_SAMSUNG_TBDU18132 16 +#define DVB_PLL_SAMSUNG_TBMU24112 17 +#define DVB_PLL_TDEE4 18 +#define DVB_PLL_THOMSON_DTT7520X 19 + +/** + * Attach a dvb-pll to the supplied frontend structure. + * + * @param fe Frontend to attach to. + * @param pll_addr i2c address of the PLL (if used). + * @param i2c i2c adapter to use (set to NULL if not used). + * @param pll_desc_id dvb_pll_desc to use. + * @return Frontend pointer on success, NULL on failure + */ +#if IS_ENABLED(CONFIG_DVB_PLL) +extern struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, + int pll_addr, + struct i2c_adapter *i2c, + unsigned int pll_desc_id); +#else +static inline struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, + int pll_addr, + struct i2c_adapter *i2c, + unsigned int pll_desc_id) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/dvb_dummy_fe.c b/drivers/media/dvb-frontends/dvb_dummy_fe.c new file mode 100644 index 00000000..d5acc304 --- /dev/null +++ b/drivers/media/dvb-frontends/dvb_dummy_fe.c @@ -0,0 +1,267 @@ +/* + * Driver for Dummy Frontend + * + * Written by Emard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "dvb_dummy_fe.h" + + +struct dvb_dummy_fe_state { + struct dvb_frontend frontend; +}; + + +static int dvb_dummy_fe_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + *status = FE_HAS_SIGNAL + | FE_HAS_CARRIER + | FE_HAS_VITERBI + | FE_HAS_SYNC + | FE_HAS_LOCK; + + return 0; +} + +static int dvb_dummy_fe_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = 0; + return 0; +} + +static int dvb_dummy_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + *strength = 0; + return 0; +} + +static int dvb_dummy_fe_read_snr(struct dvb_frontend* fe, u16* snr) +{ + *snr = 0; + return 0; +} + +static int dvb_dummy_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + *ucblocks = 0; + return 0; +} + +/* + * Only needed if it actually reads something from the hardware + */ +static int dvb_dummy_fe_get_frontend(struct dvb_frontend *fe) +{ + return 0; +} + +static int dvb_dummy_fe_set_frontend(struct dvb_frontend *fe) +{ + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + return 0; +} + +static int dvb_dummy_fe_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int dvb_dummy_fe_init(struct dvb_frontend* fe) +{ + return 0; +} + +static int dvb_dummy_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + return 0; +} + +static int dvb_dummy_fe_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + return 0; +} + +static void dvb_dummy_fe_release(struct dvb_frontend* fe) +{ + struct dvb_dummy_fe_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops dvb_dummy_fe_ofdm_ops; + +struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void) +{ + struct dvb_dummy_fe_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + if (!state) + return NULL; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &dvb_dummy_fe_ofdm_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +static struct dvb_frontend_ops dvb_dummy_fe_qpsk_ops; + +struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void) +{ + struct dvb_dummy_fe_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + if (!state) + return NULL; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &dvb_dummy_fe_qpsk_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +static struct dvb_frontend_ops dvb_dummy_fe_qam_ops; + +struct dvb_frontend *dvb_dummy_fe_qam_attach(void) +{ + struct dvb_dummy_fe_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + if (!state) + return NULL; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &dvb_dummy_fe_qam_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +static struct dvb_frontend_ops dvb_dummy_fe_ofdm_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Dummy DVB-T", + .frequency_min = 0, + .frequency_max = 863250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = dvb_dummy_fe_release, + + .init = dvb_dummy_fe_init, + .sleep = dvb_dummy_fe_sleep, + + .set_frontend = dvb_dummy_fe_set_frontend, + .get_frontend = dvb_dummy_fe_get_frontend, + + .read_status = dvb_dummy_fe_read_status, + .read_ber = dvb_dummy_fe_read_ber, + .read_signal_strength = dvb_dummy_fe_read_signal_strength, + .read_snr = dvb_dummy_fe_read_snr, + .read_ucblocks = dvb_dummy_fe_read_ucblocks, +}; + +static struct dvb_frontend_ops dvb_dummy_fe_qam_ops = { + .delsys = { SYS_DVBC_ANNEX_A }, + .info = { + .name = "Dummy DVB-C", + .frequency_stepsize = 62500, + .frequency_min = 51000000, + .frequency_max = 858000000, + .symbol_rate_min = (57840000/2)/64, /* SACLK/64 == (XIN/2)/64 */ + .symbol_rate_max = (57840000/2)/4, /* SACLK/4 */ + .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | + FE_CAN_FEC_AUTO | FE_CAN_INVERSION_AUTO + }, + + .release = dvb_dummy_fe_release, + + .init = dvb_dummy_fe_init, + .sleep = dvb_dummy_fe_sleep, + + .set_frontend = dvb_dummy_fe_set_frontend, + .get_frontend = dvb_dummy_fe_get_frontend, + + .read_status = dvb_dummy_fe_read_status, + .read_ber = dvb_dummy_fe_read_ber, + .read_signal_strength = dvb_dummy_fe_read_signal_strength, + .read_snr = dvb_dummy_fe_read_snr, + .read_ucblocks = dvb_dummy_fe_read_ucblocks, +}; + +static struct dvb_frontend_ops dvb_dummy_fe_qpsk_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Dummy DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 250, /* kHz for QPSK frontends */ + .frequency_tolerance = 29500, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK + }, + + .release = dvb_dummy_fe_release, + + .init = dvb_dummy_fe_init, + .sleep = dvb_dummy_fe_sleep, + + .set_frontend = dvb_dummy_fe_set_frontend, + .get_frontend = dvb_dummy_fe_get_frontend, + + .read_status = dvb_dummy_fe_read_status, + .read_ber = dvb_dummy_fe_read_ber, + .read_signal_strength = dvb_dummy_fe_read_signal_strength, + .read_snr = dvb_dummy_fe_read_snr, + .read_ucblocks = dvb_dummy_fe_read_ucblocks, + + .set_voltage = dvb_dummy_fe_set_voltage, + .set_tone = dvb_dummy_fe_set_tone, +}; + +MODULE_DESCRIPTION("DVB DUMMY Frontend"); +MODULE_AUTHOR("Emard"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(dvb_dummy_fe_ofdm_attach); +EXPORT_SYMBOL(dvb_dummy_fe_qam_attach); +EXPORT_SYMBOL(dvb_dummy_fe_qpsk_attach); diff --git a/drivers/media/dvb-frontends/dvb_dummy_fe.h b/drivers/media/dvb-frontends/dvb_dummy_fe.h new file mode 100644 index 00000000..0cbf9610 --- /dev/null +++ b/drivers/media/dvb-frontends/dvb_dummy_fe.h @@ -0,0 +1,51 @@ +/* + * Driver for Dummy Frontend + * + * Written by Emard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef DVB_DUMMY_FE_H +#define DVB_DUMMY_FE_H + +#include +#include +#include "dvb_frontend.h" + +#if IS_ENABLED(CONFIG_DVB_DUMMY_FE) +extern struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void); +extern struct dvb_frontend* dvb_dummy_fe_qpsk_attach(void); +extern struct dvb_frontend* dvb_dummy_fe_qam_attach(void); +#else +static inline struct dvb_frontend *dvb_dummy_fe_ofdm_attach(void) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static inline struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static inline struct dvb_frontend *dvb_dummy_fe_qam_attach(void) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_DUMMY_FE */ + +#endif // DVB_DUMMY_FE_H diff --git a/drivers/media/dvb-frontends/ec100.c b/drivers/media/dvb-frontends/ec100.c new file mode 100644 index 00000000..9d424809 --- /dev/null +++ b/drivers/media/dvb-frontends/ec100.c @@ -0,0 +1,345 @@ +/* + * E3C EC100 demodulator driver + * + * Copyright (C) 2009 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "dvb_frontend.h" +#include "ec100.h" + +struct ec100_state { + struct i2c_adapter *i2c; + struct dvb_frontend frontend; + struct ec100_config config; + + u16 ber; +}; + +/* write single register */ +static int ec100_write_reg(struct ec100_state *state, u8 reg, u8 val) +{ + int ret; + u8 buf[2] = {reg, val}; + struct i2c_msg msg[1] = { + { + .addr = state->config.demod_address, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + ret = i2c_transfer(state->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%02x\n", + KBUILD_MODNAME, ret, reg); + ret = -EREMOTEIO; + } + + return ret; +} + +/* read single register */ +static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val) +{ + int ret; + struct i2c_msg msg[2] = { + { + .addr = state->config.demod_address, + .flags = 0, + .len = 1, + .buf = ® + }, { + .addr = state->config.demod_address, + .flags = I2C_M_RD, + .len = 1, + .buf = val + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%02x\n", + KBUILD_MODNAME, ret, reg); + ret = -EREMOTEIO; + } + + return ret; +} + +static int ec100_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct ec100_state *state = fe->demodulator_priv; + int ret; + u8 tmp, tmp2; + + dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", + __func__, c->frequency, c->bandwidth_hz); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + ret = ec100_write_reg(state, 0x04, 0x06); + if (ret) + goto error; + ret = ec100_write_reg(state, 0x67, 0x58); + if (ret) + goto error; + ret = ec100_write_reg(state, 0x05, 0x18); + if (ret) + goto error; + + /* reg/bw | 6 | 7 | 8 + -------+------+------+------ + A 0x1b | 0xa1 | 0xe7 | 0x2c + A 0x1c | 0x55 | 0x63 | 0x72 + -------+------+------+------ + B 0x1b | 0xb7 | 0x00 | 0x49 + B 0x1c | 0x55 | 0x64 | 0x72 */ + + switch (c->bandwidth_hz) { + case 6000000: + tmp = 0xb7; + tmp2 = 0x55; + break; + case 7000000: + tmp = 0x00; + tmp2 = 0x64; + break; + case 8000000: + default: + tmp = 0x49; + tmp2 = 0x72; + } + + ret = ec100_write_reg(state, 0x1b, tmp); + if (ret) + goto error; + ret = ec100_write_reg(state, 0x1c, tmp2); + if (ret) + goto error; + + ret = ec100_write_reg(state, 0x0c, 0xbb); /* if freq */ + if (ret) + goto error; + ret = ec100_write_reg(state, 0x0d, 0x31); /* if freq */ + if (ret) + goto error; + + ret = ec100_write_reg(state, 0x08, 0x24); + if (ret) + goto error; + + ret = ec100_write_reg(state, 0x00, 0x00); /* go */ + if (ret) + goto error; + ret = ec100_write_reg(state, 0x00, 0x20); /* go */ + if (ret) + goto error; + + return ret; +error: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int ec100_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 300; + fesettings->step_size = 0; + fesettings->max_drift = 0; + + return 0; +} + +static int ec100_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct ec100_state *state = fe->demodulator_priv; + int ret; + u8 tmp; + *status = 0; + + ret = ec100_read_reg(state, 0x42, &tmp); + if (ret) + goto error; + + if (tmp & 0x80) { + /* bit7 set - have lock */ + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | + FE_HAS_SYNC | FE_HAS_LOCK; + } else { + ret = ec100_read_reg(state, 0x01, &tmp); + if (ret) + goto error; + + if (tmp & 0x10) { + /* bit4 set - have signal */ + *status |= FE_HAS_SIGNAL; + if (!(tmp & 0x01)) { + /* bit0 clear - have ~valid signal */ + *status |= FE_HAS_CARRIER | FE_HAS_VITERBI; + } + } + } + + return ret; +error: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int ec100_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct ec100_state *state = fe->demodulator_priv; + int ret; + u8 tmp, tmp2; + u16 ber2; + + *ber = 0; + + ret = ec100_read_reg(state, 0x65, &tmp); + if (ret) + goto error; + ret = ec100_read_reg(state, 0x66, &tmp2); + if (ret) + goto error; + + ber2 = (tmp2 << 8) | tmp; + + /* if counter overflow or clear */ + if (ber2 < state->ber) + *ber = ber2; + else + *ber = ber2 - state->ber; + + state->ber = ber2; + + return ret; +error: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int ec100_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct ec100_state *state = fe->demodulator_priv; + int ret; + u8 tmp; + + ret = ec100_read_reg(state, 0x24, &tmp); + if (ret) { + *strength = 0; + goto error; + } + + *strength = ((tmp << 8) | tmp); + + return ret; +error: + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int ec100_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + *snr = 0; + return 0; +} + +static int ec100_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static void ec100_release(struct dvb_frontend *fe) +{ + struct ec100_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops ec100_ops; + +struct dvb_frontend *ec100_attach(const struct ec100_config *config, + struct i2c_adapter *i2c) +{ + int ret; + struct ec100_state *state = NULL; + u8 tmp; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct ec100_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = i2c; + memcpy(&state->config, config, sizeof(struct ec100_config)); + + /* check if the demod is there */ + ret = ec100_read_reg(state, 0x33, &tmp); + if (ret || tmp != 0x0b) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &ec100_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(ec100_attach); + +static struct dvb_frontend_ops ec100_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "E3C EC100 DVB-T", + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_MUTE_TS + }, + + .release = ec100_release, + .set_frontend = ec100_set_frontend, + .get_tune_settings = ec100_get_tune_settings, + .read_status = ec100_read_status, + .read_ber = ec100_read_ber, + .read_signal_strength = ec100_read_signal_strength, + .read_snr = ec100_read_snr, + .read_ucblocks = ec100_read_ucblocks, +}; + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("E3C EC100 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/ec100.h b/drivers/media/dvb-frontends/ec100.h new file mode 100644 index 00000000..37558403 --- /dev/null +++ b/drivers/media/dvb-frontends/ec100.h @@ -0,0 +1,46 @@ +/* + * E3C EC100 demodulator driver + * + * Copyright (C) 2009 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef EC100_H +#define EC100_H + +#include +#include + +struct ec100_config { + /* demodulator's I2C address */ + u8 demod_address; +}; + + +#if IS_ENABLED(CONFIG_DVB_EC100) +extern struct dvb_frontend *ec100_attach(const struct ec100_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *ec100_attach( + const struct ec100_config *config, struct i2c_adapter *i2c) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* EC100_H */ diff --git a/drivers/media/dvb-frontends/eds1547.h b/drivers/media/dvb-frontends/eds1547.h new file mode 100644 index 00000000..c983f2f8 --- /dev/null +++ b/drivers/media/dvb-frontends/eds1547.h @@ -0,0 +1,133 @@ +/* eds1547.h Earda EDS-1547 tuner support +* +* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation, version 2. +* +* see Documentation/dvb/README.dvb-usb for more information +*/ + +#ifndef EDS1547 +#define EDS1547 + +static u8 stv0288_earda_inittab[] = { + 0x01, 0x57, + 0x02, 0x20, + 0x03, 0x8e, + 0x04, 0x8e, + 0x05, 0x12, + 0x06, 0x00, + 0x07, 0x00, + 0x09, 0x00, + 0x0a, 0x04, + 0x0b, 0x00, + 0x0c, 0x00, + 0x0d, 0x00, + 0x0e, 0xd4, + 0x0f, 0x30, + 0x11, 0x44, + 0x12, 0x03, + 0x13, 0x48, + 0x14, 0x84, + 0x15, 0x45, + 0x16, 0xb7, + 0x17, 0x9c, + 0x18, 0x00, + 0x19, 0xa6, + 0x1a, 0x88, + 0x1b, 0x8f, + 0x1c, 0xf0, + 0x20, 0x0b, + 0x21, 0x54, + 0x22, 0x00, + 0x23, 0x00, + 0x2b, 0xff, + 0x2c, 0xf7, + 0x30, 0x00, + 0x31, 0x1e, + 0x32, 0x14, + 0x33, 0x0f, + 0x34, 0x09, + 0x35, 0x0c, + 0x36, 0x05, + 0x37, 0x2f, + 0x38, 0x16, + 0x39, 0xbd, + 0x3a, 0x00, + 0x3b, 0x13, + 0x3c, 0x11, + 0x3d, 0x30, + 0x40, 0x63, + 0x41, 0x04, + 0x42, 0x20, + 0x43, 0x00, + 0x44, 0x00, + 0x45, 0x00, + 0x46, 0x00, + 0x47, 0x00, + 0x4a, 0x00, + 0x50, 0x10, + 0x51, 0x36, + 0x52, 0x09, + 0x53, 0x94, + 0x54, 0x62, + 0x55, 0x29, + 0x56, 0x64, + 0x57, 0x2b, + 0x58, 0x54, + 0x59, 0x86, + 0x5a, 0x00, + 0x5b, 0x9b, + 0x5c, 0x08, + 0x5d, 0x7f, + 0x5e, 0x00, + 0x5f, 0xff, + 0x70, 0x00, + 0x71, 0x00, + 0x72, 0x00, + 0x74, 0x00, + 0x75, 0x00, + 0x76, 0x00, + 0x81, 0x00, + 0x82, 0x3f, + 0x83, 0x3f, + 0x84, 0x00, + 0x85, 0x00, + 0x88, 0x00, + 0x89, 0x00, + 0x8a, 0x00, + 0x8b, 0x00, + 0x8c, 0x00, + 0x90, 0x00, + 0x91, 0x00, + 0x92, 0x00, + 0x93, 0x00, + 0x94, 0x1c, + 0x97, 0x00, + 0xa0, 0x48, + 0xa1, 0x00, + 0xb0, 0xb8, + 0xb1, 0x3a, + 0xb2, 0x10, + 0xb3, 0x82, + 0xb4, 0x80, + 0xb5, 0x82, + 0xb6, 0x82, + 0xb7, 0x82, + 0xb8, 0x20, + 0xb9, 0x00, + 0xf0, 0x00, + 0xf1, 0x00, + 0xf2, 0xc0, + 0xff,0xff, +}; + +static struct stv0288_config earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + .inittab = stv0288_earda_inittab, +}; + +#endif diff --git a/drivers/media/dvb-frontends/hd29l2.c b/drivers/media/dvb-frontends/hd29l2.c new file mode 100644 index 00000000..d7b9d549 --- /dev/null +++ b/drivers/media/dvb-frontends/hd29l2.c @@ -0,0 +1,866 @@ +/* + * HDIC HD29L2 DMB-TH demodulator driver + * + * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D + * + * Author: Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "hd29l2_priv.h" + +/* write multiple registers */ +static int hd29l2_wr_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[2 + len]; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + buf[0] = 0x00; + buf[1] = reg; + memcpy(&buf[2], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, + "%s: i2c wr failed=%d reg=%02x len=%d\n", + KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + + return ret; +} + +/* read multiple registers */ +static int hd29l2_rd_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[2] = { 0x00, reg }; + struct i2c_msg msg[2] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 2, + .buf = buf, + }, { + .addr = priv->cfg.i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = val, + } + }; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, + "%s: i2c rd failed=%d reg=%02x len=%d\n", + KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + + return ret; +} + +/* write single register */ +static int hd29l2_wr_reg(struct hd29l2_priv *priv, u8 reg, u8 val) +{ + return hd29l2_wr_regs(priv, reg, &val, 1); +} + +/* read single register */ +static int hd29l2_rd_reg(struct hd29l2_priv *priv, u8 reg, u8 *val) +{ + return hd29l2_rd_regs(priv, reg, val, 1); +} + +/* write single register with mask */ +static int hd29l2_wr_reg_mask(struct hd29l2_priv *priv, u8 reg, u8 val, u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = hd29l2_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return hd29l2_wr_regs(priv, reg, &val, 1); +} + +/* read single register with mask */ +int hd29l2_rd_reg_mask(struct hd29l2_priv *priv, u8 reg, u8 *val, u8 mask) +{ + int ret, i; + u8 tmp; + + ret = hd29l2_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + tmp &= mask; + + /* find position of the first bit */ + for (i = 0; i < 8; i++) { + if ((mask >> i) & 0x01) + break; + } + *val = tmp >> i; + + return 0; +} + +static int hd29l2_soft_reset(struct hd29l2_priv *priv) +{ + int ret; + u8 tmp; + + ret = hd29l2_rd_reg(priv, 0x26, &tmp); + if (ret) + goto err; + + ret = hd29l2_wr_reg(priv, 0x26, 0x0d); + if (ret) + goto err; + + usleep_range(10000, 20000); + + ret = hd29l2_wr_reg(priv, 0x26, tmp); + if (ret) + goto err; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int hd29l2_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + int ret, i; + struct hd29l2_priv *priv = fe->demodulator_priv; + u8 tmp; + + dev_dbg(&priv->i2c->dev, "%s: enable=%d\n", __func__, enable); + + /* set tuner address for demod */ + if (!priv->tuner_i2c_addr_programmed && enable) { + /* no need to set tuner address every time, once is enough */ + ret = hd29l2_wr_reg(priv, 0x9d, priv->cfg.tuner_i2c_addr << 1); + if (ret) + goto err; + + priv->tuner_i2c_addr_programmed = true; + } + + /* open / close gate */ + ret = hd29l2_wr_reg(priv, 0x9f, enable); + if (ret) + goto err; + + /* wait demod ready */ + for (i = 10; i; i--) { + ret = hd29l2_rd_reg(priv, 0x9e, &tmp); + if (ret) + goto err; + + if (tmp == enable) + break; + + usleep_range(5000, 10000); + } + + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int hd29l2_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + int ret; + struct hd29l2_priv *priv = fe->demodulator_priv; + u8 buf[2]; + + *status = 0; + + ret = hd29l2_rd_reg(priv, 0x05, &buf[0]); + if (ret) + goto err; + + if (buf[0] & 0x01) { + /* full lock */ + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | + FE_HAS_SYNC | FE_HAS_LOCK; + } else { + ret = hd29l2_rd_reg(priv, 0x0d, &buf[1]); + if (ret) + goto err; + + if ((buf[1] & 0xfe) == 0x78) + /* partial lock */ + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC; + } + + priv->fe_status = *status; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int hd29l2_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + int ret; + struct hd29l2_priv *priv = fe->demodulator_priv; + u8 buf[2]; + u16 tmp; + + if (!(priv->fe_status & FE_HAS_LOCK)) { + *snr = 0; + ret = 0; + goto err; + } + + ret = hd29l2_rd_regs(priv, 0x0b, buf, 2); + if (ret) + goto err; + + tmp = (buf[0] << 8) | buf[1]; + + /* report SNR in dB * 10 */ + #define LOG10_20736_24 72422627 /* log10(20736) << 24 */ + if (tmp) + *snr = (LOG10_20736_24 - intlog10(tmp)) / ((1 << 24) / 100); + else + *snr = 0; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int hd29l2_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + int ret; + struct hd29l2_priv *priv = fe->demodulator_priv; + u8 buf[2]; + u16 tmp; + + *strength = 0; + + ret = hd29l2_rd_regs(priv, 0xd5, buf, 2); + if (ret) + goto err; + + tmp = buf[0] << 8 | buf[1]; + tmp = ~tmp & 0x0fff; + + /* scale value to 0x0000-0xffff from 0x0000-0x0fff */ + *strength = tmp * 0xffff / 0x0fff; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int hd29l2_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + int ret; + struct hd29l2_priv *priv = fe->demodulator_priv; + u8 buf[2]; + + if (!(priv->fe_status & FE_HAS_SYNC)) { + *ber = 0; + ret = 0; + goto err; + } + + ret = hd29l2_rd_regs(priv, 0xd9, buf, 2); + if (ret) { + *ber = 0; + goto err; + } + + /* LDPC BER */ + *ber = ((buf[0] & 0x0f) << 8) | buf[1]; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int hd29l2_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + /* no way to read? */ + *ucblocks = 0; + return 0; +} + +static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe) +{ + int ret, i; + struct hd29l2_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 tmp, buf[3]; + u8 modulation, carrier, guard_interval, interleave, code_rate; + u64 num64; + u32 if_freq, if_ctl; + bool auto_mode; + + dev_dbg(&priv->i2c->dev, "%s: delivery_system=%d frequency=%d " \ + "bandwidth_hz=%d modulation=%d inversion=%d " \ + "fec_inner=%d guard_interval=%d\n", __func__, + c->delivery_system, c->frequency, c->bandwidth_hz, + c->modulation, c->inversion, c->fec_inner, + c->guard_interval); + + /* as for now we detect always params automatically */ + auto_mode = true; + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* get and program IF */ + if (fe->ops.tuner_ops.get_if_frequency) + fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); + else + if_freq = 0; + + if (if_freq) { + /* normal IF */ + + /* calc IF control value */ + num64 = if_freq; + num64 *= 0x800000; + num64 = div_u64(num64, HD29L2_XTAL); + num64 -= 0x800000; + if_ctl = num64; + + tmp = 0xfc; /* tuner type normal */ + } else { + /* zero IF */ + if_ctl = 0; + tmp = 0xfe; /* tuner type Zero-IF */ + } + + buf[0] = ((if_ctl >> 0) & 0xff); + buf[1] = ((if_ctl >> 8) & 0xff); + buf[2] = ((if_ctl >> 16) & 0xff); + + /* program IF control */ + ret = hd29l2_wr_regs(priv, 0x14, buf, 3); + if (ret) + goto err; + + /* program tuner type */ + ret = hd29l2_wr_reg(priv, 0xab, tmp); + if (ret) + goto err; + + dev_dbg(&priv->i2c->dev, "%s: if_freq=%d if_ctl=%x\n", + __func__, if_freq, if_ctl); + + if (auto_mode) { + /* + * use auto mode + */ + + /* disable quick mode */ + ret = hd29l2_wr_reg_mask(priv, 0xac, 0 << 7, 0x80); + if (ret) + goto err; + + ret = hd29l2_wr_reg_mask(priv, 0x82, 1 << 1, 0x02); + if (ret) + goto err; + + /* enable auto mode */ + ret = hd29l2_wr_reg_mask(priv, 0x7d, 1 << 6, 0x40); + if (ret) + goto err; + + ret = hd29l2_wr_reg_mask(priv, 0x81, 1 << 3, 0x08); + if (ret) + goto err; + + /* soft reset */ + ret = hd29l2_soft_reset(priv); + if (ret) + goto err; + + /* detect modulation */ + for (i = 30; i; i--) { + msleep(100); + + ret = hd29l2_rd_reg(priv, 0x0d, &tmp); + if (ret) + goto err; + + if ((((tmp & 0xf0) >= 0x10) && + ((tmp & 0x0f) == 0x08)) || (tmp >= 0x2c)) + break; + } + + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); + + if (i == 0) + /* detection failed */ + return DVBFE_ALGO_SEARCH_FAILED; + + /* read modulation */ + ret = hd29l2_rd_reg_mask(priv, 0x7d, &modulation, 0x07); + if (ret) + goto err; + } else { + /* + * use manual mode + */ + + modulation = HD29L2_QAM64; + carrier = HD29L2_CARRIER_MULTI; + guard_interval = HD29L2_PN945; + interleave = HD29L2_INTERLEAVER_420; + code_rate = HD29L2_CODE_RATE_08; + + tmp = (code_rate << 3) | modulation; + ret = hd29l2_wr_reg_mask(priv, 0x7d, tmp, 0x5f); + if (ret) + goto err; + + tmp = (carrier << 2) | guard_interval; + ret = hd29l2_wr_reg_mask(priv, 0x81, tmp, 0x0f); + if (ret) + goto err; + + tmp = interleave; + ret = hd29l2_wr_reg_mask(priv, 0x82, tmp, 0x03); + if (ret) + goto err; + } + + /* ensure modulation validy */ + /* 0=QAM4_NR, 1=QAM4, 2=QAM16, 3=QAM32, 4=QAM64 */ + if (modulation > (ARRAY_SIZE(reg_mod_vals_tab[0].val) - 1)) { + dev_dbg(&priv->i2c->dev, "%s: modulation=%d not valid\n", + __func__, modulation); + goto err; + } + + /* program registers according to modulation */ + for (i = 0; i < ARRAY_SIZE(reg_mod_vals_tab); i++) { + ret = hd29l2_wr_reg(priv, reg_mod_vals_tab[i].reg, + reg_mod_vals_tab[i].val[modulation]); + if (ret) + goto err; + } + + /* read guard interval */ + ret = hd29l2_rd_reg_mask(priv, 0x81, &guard_interval, 0x03); + if (ret) + goto err; + + /* read carrier mode */ + ret = hd29l2_rd_reg_mask(priv, 0x81, &carrier, 0x04); + if (ret) + goto err; + + dev_dbg(&priv->i2c->dev, + "%s: modulation=%d guard_interval=%d carrier=%d\n", + __func__, modulation, guard_interval, carrier); + + if ((carrier == HD29L2_CARRIER_MULTI) && (modulation == HD29L2_QAM64) && + (guard_interval == HD29L2_PN945)) { + dev_dbg(&priv->i2c->dev, "%s: C=3780 && QAM64 && PN945\n", + __func__); + + ret = hd29l2_wr_reg(priv, 0x42, 0x33); + if (ret) + goto err; + + ret = hd29l2_wr_reg(priv, 0xdd, 0x01); + if (ret) + goto err; + } + + usleep_range(10000, 20000); + + /* soft reset */ + ret = hd29l2_soft_reset(priv); + if (ret) + goto err; + + /* wait demod lock */ + for (i = 30; i; i--) { + msleep(100); + + /* read lock bit */ + ret = hd29l2_rd_reg_mask(priv, 0x05, &tmp, 0x01); + if (ret) + goto err; + + if (tmp) + break; + } + + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); + + if (i == 0) + return DVBFE_ALGO_SEARCH_AGAIN; + + return DVBFE_ALGO_SEARCH_SUCCESS; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return DVBFE_ALGO_SEARCH_ERROR; +} + +static int hd29l2_get_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + +static int hd29l2_get_frontend(struct dvb_frontend *fe) +{ + int ret; + struct hd29l2_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 buf[3]; + u32 if_ctl; + char *str_constellation, *str_code_rate, *str_constellation_code_rate, + *str_guard_interval, *str_carrier, *str_guard_interval_carrier, + *str_interleave, *str_interleave_; + + ret = hd29l2_rd_reg(priv, 0x7d, &buf[0]); + if (ret) + goto err; + + ret = hd29l2_rd_regs(priv, 0x81, &buf[1], 2); + if (ret) + goto err; + + /* constellation, 0x7d[2:0] */ + switch ((buf[0] >> 0) & 0x07) { + case 0: /* QAM4NR */ + str_constellation = "QAM4NR"; + c->modulation = QAM_AUTO; /* FIXME */ + break; + case 1: /* QAM4 */ + str_constellation = "QAM4"; + c->modulation = QPSK; /* FIXME */ + break; + case 2: + str_constellation = "QAM16"; + c->modulation = QAM_16; + break; + case 3: + str_constellation = "QAM32"; + c->modulation = QAM_32; + break; + case 4: + str_constellation = "QAM64"; + c->modulation = QAM_64; + break; + default: + str_constellation = "?"; + } + + /* LDPC code rate, 0x7d[4:3] */ + switch ((buf[0] >> 3) & 0x03) { + case 0: /* 0.4 */ + str_code_rate = "0.4"; + c->fec_inner = FEC_AUTO; /* FIXME */ + break; + case 1: /* 0.6 */ + str_code_rate = "0.6"; + c->fec_inner = FEC_3_5; + break; + case 2: /* 0.8 */ + str_code_rate = "0.8"; + c->fec_inner = FEC_4_5; + break; + default: + str_code_rate = "?"; + } + + /* constellation & code rate set, 0x7d[6] */ + switch ((buf[0] >> 6) & 0x01) { + case 0: + str_constellation_code_rate = "manual"; + break; + case 1: + str_constellation_code_rate = "auto"; + break; + default: + str_constellation_code_rate = "?"; + } + + /* frame header, 0x81[1:0] */ + switch ((buf[1] >> 0) & 0x03) { + case 0: /* PN945 */ + str_guard_interval = "PN945"; + c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */ + break; + case 1: /* PN595 */ + str_guard_interval = "PN595"; + c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */ + break; + case 2: /* PN420 */ + str_guard_interval = "PN420"; + c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */ + break; + default: + str_guard_interval = "?"; + } + + /* carrier, 0x81[2] */ + switch ((buf[1] >> 2) & 0x01) { + case 0: + str_carrier = "C=1"; + break; + case 1: + str_carrier = "C=3780"; + break; + default: + str_carrier = "?"; + } + + /* frame header & carrier set, 0x81[3] */ + switch ((buf[1] >> 3) & 0x01) { + case 0: + str_guard_interval_carrier = "manual"; + break; + case 1: + str_guard_interval_carrier = "auto"; + break; + default: + str_guard_interval_carrier = "?"; + } + + /* interleave, 0x82[0] */ + switch ((buf[2] >> 0) & 0x01) { + case 0: + str_interleave = "M=720"; + break; + case 1: + str_interleave = "M=240"; + break; + default: + str_interleave = "?"; + } + + /* interleave set, 0x82[1] */ + switch ((buf[2] >> 1) & 0x01) { + case 0: + str_interleave_ = "manual"; + break; + case 1: + str_interleave_ = "auto"; + break; + default: + str_interleave_ = "?"; + } + + /* + * We can read out current detected NCO and use that value next + * time instead of calculating new value from targed IF. + * I think it will not effect receiver sensitivity but gaining lock + * after tune could be easier... + */ + ret = hd29l2_rd_regs(priv, 0xb1, &buf[0], 3); + if (ret) + goto err; + + if_ctl = (buf[0] << 16) | ((buf[1] - 7) << 8) | buf[2]; + + dev_dbg(&priv->i2c->dev, "%s: %s %s %s | %s %s %s | %s %s | NCO=%06x\n", + __func__, str_constellation, str_code_rate, + str_constellation_code_rate, str_guard_interval, + str_carrier, str_guard_interval_carrier, str_interleave, + str_interleave_, if_ctl); + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int hd29l2_init(struct dvb_frontend *fe) +{ + int ret, i; + struct hd29l2_priv *priv = fe->demodulator_priv; + u8 tmp; + static const struct reg_val tab[] = { + { 0x3a, 0x06 }, + { 0x3b, 0x03 }, + { 0x3c, 0x04 }, + { 0xaf, 0x06 }, + { 0xb0, 0x1b }, + { 0x80, 0x64 }, + { 0x10, 0x38 }, + }; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + /* reset demod */ + /* it is recommended to HW reset chip using RST_N pin */ + if (fe->callback) { + ret = fe->callback(fe, DVB_FRONTEND_COMPONENT_DEMOD, 0, 0); + if (ret) + goto err; + + /* reprogramming needed because HW reset clears registers */ + priv->tuner_i2c_addr_programmed = false; + } + + /* init */ + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = hd29l2_wr_reg(priv, tab[i].reg, tab[i].val); + if (ret) + goto err; + } + + /* TS params */ + ret = hd29l2_rd_reg(priv, 0x36, &tmp); + if (ret) + goto err; + + tmp &= 0x1b; + tmp |= priv->cfg.ts_mode; + ret = hd29l2_wr_reg(priv, 0x36, tmp); + if (ret) + goto err; + + ret = hd29l2_rd_reg(priv, 0x31, &tmp); + tmp &= 0xef; + + if (!(priv->cfg.ts_mode >> 7)) + /* set b4 for serial TS */ + tmp |= 0x10; + + ret = hd29l2_wr_reg(priv, 0x31, tmp); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static void hd29l2_release(struct dvb_frontend *fe) +{ + struct hd29l2_priv *priv = fe->demodulator_priv; + kfree(priv); +} + +static struct dvb_frontend_ops hd29l2_ops; + +struct dvb_frontend *hd29l2_attach(const struct hd29l2_config *config, + struct i2c_adapter *i2c) +{ + int ret; + struct hd29l2_priv *priv = NULL; + u8 tmp; + + /* allocate memory for the internal state */ + priv = kzalloc(sizeof(struct hd29l2_priv), GFP_KERNEL); + if (priv == NULL) + goto err; + + /* setup the state */ + priv->i2c = i2c; + memcpy(&priv->cfg, config, sizeof(struct hd29l2_config)); + + + /* check if the demod is there */ + ret = hd29l2_rd_reg(priv, 0x00, &tmp); + if (ret) + goto err; + + /* create dvb_frontend */ + memcpy(&priv->fe.ops, &hd29l2_ops, sizeof(struct dvb_frontend_ops)); + priv->fe.demodulator_priv = priv; + + return &priv->fe; +err: + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(hd29l2_attach); + +static struct dvb_frontend_ops hd29l2_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "HDIC HD29L2 DMB-TH", + .frequency_min = 474000000, + .frequency_max = 858000000, + .frequency_stepsize = 10000, + .caps = FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_BANDWIDTH_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER + }, + + .release = hd29l2_release, + + .init = hd29l2_init, + + .get_frontend_algo = hd29l2_get_frontend_algo, + .search = hd29l2_search, + .get_frontend = hd29l2_get_frontend, + + .read_status = hd29l2_read_status, + .read_snr = hd29l2_read_snr, + .read_signal_strength = hd29l2_read_signal_strength, + .read_ber = hd29l2_read_ber, + .read_ucblocks = hd29l2_read_ucblocks, + + .i2c_gate_ctrl = hd29l2_i2c_gate_ctrl, +}; + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("HDIC HD29L2 DMB-TH demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/hd29l2.h b/drivers/media/dvb-frontends/hd29l2.h new file mode 100644 index 00000000..05cd1302 --- /dev/null +++ b/drivers/media/dvb-frontends/hd29l2.h @@ -0,0 +1,66 @@ +/* + * HDIC HD29L2 DMB-TH demodulator driver + * + * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D + * + * Author: Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef HD29L2_H +#define HD29L2_H + +#include +#include + +struct hd29l2_config { + /* + * demodulator I2C address + */ + u8 i2c_addr; + + /* + * tuner I2C address + * only needed when tuner is behind demod I2C-gate + */ + u8 tuner_i2c_addr; + + /* + * TS settings + */ +#define HD29L2_TS_SERIAL 0x00 +#define HD29L2_TS_PARALLEL 0x80 +#define HD29L2_TS_CLK_NORMAL 0x40 +#define HD29L2_TS_CLK_INVERTED 0x00 +#define HD29L2_TS_CLK_GATED 0x20 +#define HD29L2_TS_CLK_FREE 0x00 + u8 ts_mode; +}; + + +#if IS_ENABLED(CONFIG_DVB_HD29L2) +extern struct dvb_frontend *hd29l2_attach(const struct hd29l2_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *hd29l2_attach( +const struct hd29l2_config *config, struct i2c_adapter *i2c) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* HD29L2_H */ diff --git a/drivers/media/dvb-frontends/hd29l2_priv.h b/drivers/media/dvb-frontends/hd29l2_priv.h new file mode 100644 index 00000000..4d571a22 --- /dev/null +++ b/drivers/media/dvb-frontends/hd29l2_priv.h @@ -0,0 +1,301 @@ +/* + * HDIC HD29L2 DMB-TH demodulator driver + * + * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D + * + * Author: Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef HD29L2_PRIV +#define HD29L2_PRIV + +#include +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "hd29l2.h" + +#define HD29L2_XTAL 30400000 /* Hz */ + + +#define HD29L2_QAM4NR 0x00 +#define HD29L2_QAM4 0x01 +#define HD29L2_QAM16 0x02 +#define HD29L2_QAM32 0x03 +#define HD29L2_QAM64 0x04 + +#define HD29L2_CODE_RATE_04 0x00 +#define HD29L2_CODE_RATE_06 0x08 +#define HD29L2_CODE_RATE_08 0x10 + +#define HD29L2_PN945 0x00 +#define HD29L2_PN595 0x01 +#define HD29L2_PN420 0x02 + +#define HD29L2_CARRIER_SINGLE 0x00 +#define HD29L2_CARRIER_MULTI 0x01 + +#define HD29L2_INTERLEAVER_720 0x00 +#define HD29L2_INTERLEAVER_420 0x01 + +struct reg_val { + u8 reg; + u8 val; +}; + +struct reg_mod_vals { + u8 reg; + u8 val[5]; +}; + +struct hd29l2_priv { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct hd29l2_config cfg; + u8 tuner_i2c_addr_programmed:1; + + fe_status_t fe_status; +}; + +static const struct reg_mod_vals reg_mod_vals_tab[] = { + /* REG, QAM4NR, QAM4,QAM16,QAM32,QAM64 */ + { 0x01, { 0x10, 0x10, 0x10, 0x10, 0x10 } }, + { 0x02, { 0x07, 0x07, 0x07, 0x07, 0x07 } }, + { 0x03, { 0x10, 0x10, 0x10, 0x10, 0x10 } }, + { 0x04, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x05, { 0x61, 0x60, 0x60, 0x61, 0x60 } }, + { 0x06, { 0xff, 0xff, 0xff, 0xff, 0xff } }, + { 0x07, { 0xff, 0xff, 0xff, 0xff, 0xff } }, + { 0x08, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x09, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x0a, { 0x15, 0x15, 0x03, 0x03, 0x03 } }, + { 0x0d, { 0x78, 0x78, 0x88, 0x78, 0x78 } }, + { 0x0e, { 0xa0, 0x90, 0xa0, 0xa0, 0xa0 } }, + { 0x0f, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x10, { 0xa0, 0xa0, 0x58, 0x38, 0x38 } }, + { 0x11, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x12, { 0x5a, 0x5a, 0x5a, 0x5a, 0x5a } }, + { 0x13, { 0xa2, 0xa2, 0xa2, 0xa2, 0xa2 } }, + { 0x17, { 0x40, 0x40, 0x40, 0x40, 0x40 } }, + { 0x18, { 0x21, 0x21, 0x42, 0x52, 0x42 } }, + { 0x19, { 0x21, 0x21, 0x62, 0x72, 0x62 } }, + { 0x1a, { 0x32, 0x43, 0xa9, 0xb9, 0xa9 } }, + { 0x1b, { 0x32, 0x43, 0xb9, 0xd8, 0xb9 } }, + { 0x1c, { 0x02, 0x02, 0x03, 0x02, 0x03 } }, + { 0x1d, { 0x0c, 0x0c, 0x01, 0x02, 0x02 } }, + { 0x1e, { 0x02, 0x02, 0x02, 0x01, 0x02 } }, + { 0x1f, { 0x02, 0x02, 0x01, 0x02, 0x04 } }, + { 0x20, { 0x01, 0x02, 0x01, 0x01, 0x01 } }, + { 0x21, { 0x08, 0x08, 0x0a, 0x0a, 0x0a } }, + { 0x22, { 0x06, 0x06, 0x04, 0x05, 0x05 } }, + { 0x23, { 0x06, 0x06, 0x05, 0x03, 0x05 } }, + { 0x24, { 0x08, 0x08, 0x05, 0x07, 0x07 } }, + { 0x25, { 0x16, 0x10, 0x10, 0x0a, 0x10 } }, + { 0x26, { 0x14, 0x14, 0x04, 0x04, 0x04 } }, + { 0x27, { 0x58, 0x58, 0x58, 0x5c, 0x58 } }, + { 0x28, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } }, + { 0x29, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } }, + { 0x2a, { 0x08, 0x0a, 0x08, 0x08, 0x08 } }, + { 0x2b, { 0x08, 0x08, 0x08, 0x08, 0x08 } }, + { 0x2c, { 0x06, 0x06, 0x06, 0x06, 0x06 } }, + { 0x2d, { 0x05, 0x06, 0x06, 0x06, 0x06 } }, + { 0x2e, { 0x21, 0x21, 0x21, 0x21, 0x21 } }, + { 0x2f, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x30, { 0x14, 0x14, 0x14, 0x14, 0x14 } }, + { 0x33, { 0xb7, 0xb7, 0xb7, 0xb7, 0xb7 } }, + { 0x34, { 0x81, 0x81, 0x81, 0x81, 0x81 } }, + { 0x35, { 0x80, 0x80, 0x80, 0x80, 0x80 } }, + { 0x37, { 0x70, 0x70, 0x70, 0x70, 0x70 } }, + { 0x38, { 0x04, 0x04, 0x02, 0x02, 0x02 } }, + { 0x39, { 0x07, 0x07, 0x05, 0x05, 0x05 } }, + { 0x3a, { 0x06, 0x06, 0x06, 0x06, 0x06 } }, + { 0x3b, { 0x03, 0x03, 0x03, 0x03, 0x03 } }, + { 0x3c, { 0x07, 0x06, 0x04, 0x04, 0x04 } }, + { 0x3d, { 0xf0, 0xf0, 0xf0, 0xf0, 0x80 } }, + { 0x3e, { 0x60, 0x60, 0x60, 0x60, 0xff } }, + { 0x3f, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x40, { 0x5b, 0x5b, 0x5b, 0x57, 0x50 } }, + { 0x41, { 0x30, 0x30, 0x30, 0x30, 0x18 } }, + { 0x42, { 0x20, 0x20, 0x20, 0x00, 0x30 } }, + { 0x43, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x44, { 0x3f, 0x3f, 0x3f, 0x3f, 0x3f } }, + { 0x45, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x46, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } }, + { 0x47, { 0x00, 0x00, 0x95, 0x00, 0x95 } }, + { 0x48, { 0xc0, 0xc0, 0xc0, 0xc0, 0xc0 } }, + { 0x49, { 0xc0, 0xc0, 0xc0, 0xc0, 0xc0 } }, + { 0x4a, { 0x40, 0x40, 0x33, 0x11, 0x11 } }, + { 0x4b, { 0x40, 0x40, 0x00, 0x00, 0x00 } }, + { 0x4c, { 0x40, 0x40, 0x99, 0x11, 0x11 } }, + { 0x4d, { 0x40, 0x40, 0x00, 0x00, 0x00 } }, + { 0x4e, { 0x40, 0x40, 0x66, 0x77, 0x77 } }, + { 0x4f, { 0x40, 0x40, 0x00, 0x00, 0x00 } }, + { 0x50, { 0x40, 0x40, 0x88, 0x33, 0x11 } }, + { 0x51, { 0x40, 0x40, 0x00, 0x00, 0x00 } }, + { 0x52, { 0x40, 0x40, 0x88, 0x02, 0x02 } }, + { 0x53, { 0x40, 0x40, 0x00, 0x02, 0x02 } }, + { 0x54, { 0x00, 0x00, 0x88, 0x33, 0x33 } }, + { 0x55, { 0x40, 0x40, 0x00, 0x00, 0x00 } }, + { 0x56, { 0x00, 0x00, 0x00, 0x0b, 0x00 } }, + { 0x57, { 0x40, 0x40, 0x0a, 0x0b, 0x0a } }, + { 0x58, { 0xaa, 0x00, 0x00, 0x00, 0x00 } }, + { 0x59, { 0x7a, 0x40, 0x02, 0x02, 0x02 } }, + { 0x5a, { 0x18, 0x18, 0x01, 0x01, 0x01 } }, + { 0x5b, { 0x18, 0x18, 0x01, 0x01, 0x01 } }, + { 0x5c, { 0x18, 0x18, 0x01, 0x01, 0x01 } }, + { 0x5d, { 0x18, 0x18, 0x01, 0x01, 0x01 } }, + { 0x5e, { 0xc0, 0xc0, 0xc0, 0xff, 0xc0 } }, + { 0x5f, { 0xc0, 0xc0, 0xc0, 0xff, 0xc0 } }, + { 0x60, { 0x40, 0x40, 0x00, 0x30, 0x30 } }, + { 0x61, { 0x40, 0x40, 0x10, 0x30, 0x30 } }, + { 0x62, { 0x40, 0x40, 0x00, 0x30, 0x30 } }, + { 0x63, { 0x40, 0x40, 0x05, 0x30, 0x30 } }, + { 0x64, { 0x40, 0x40, 0x06, 0x00, 0x30 } }, + { 0x65, { 0x40, 0x40, 0x06, 0x08, 0x30 } }, + { 0x66, { 0x40, 0x40, 0x00, 0x00, 0x20 } }, + { 0x67, { 0x40, 0x40, 0x01, 0x04, 0x20 } }, + { 0x68, { 0x00, 0x00, 0x30, 0x00, 0x20 } }, + { 0x69, { 0xa0, 0xa0, 0x00, 0x08, 0x20 } }, + { 0x6a, { 0x00, 0x00, 0x30, 0x00, 0x25 } }, + { 0x6b, { 0xa0, 0xa0, 0x00, 0x06, 0x25 } }, + { 0x6c, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x6d, { 0xa0, 0x60, 0x0c, 0x03, 0x0c } }, + { 0x6e, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x6f, { 0xa0, 0x60, 0x04, 0x01, 0x04 } }, + { 0x70, { 0x58, 0x58, 0xaa, 0xaa, 0xaa } }, + { 0x71, { 0x58, 0x58, 0xaa, 0xaa, 0xaa } }, + { 0x72, { 0x58, 0x58, 0xff, 0xff, 0xff } }, + { 0x73, { 0x58, 0x58, 0xff, 0xff, 0xff } }, + { 0x74, { 0x06, 0x06, 0x09, 0x05, 0x05 } }, + { 0x75, { 0x06, 0x06, 0x0a, 0x10, 0x10 } }, + { 0x76, { 0x10, 0x10, 0x06, 0x0a, 0x0a } }, + { 0x77, { 0x12, 0x18, 0x28, 0x10, 0x28 } }, + { 0x78, { 0xf8, 0xf8, 0xf8, 0xf8, 0xf8 } }, + { 0x79, { 0x15, 0x15, 0x03, 0x03, 0x03 } }, + { 0x7a, { 0x02, 0x02, 0x01, 0x04, 0x03 } }, + { 0x7b, { 0x01, 0x02, 0x03, 0x03, 0x03 } }, + { 0x7c, { 0x28, 0x28, 0x28, 0x28, 0x28 } }, + { 0x7f, { 0x25, 0x92, 0x5f, 0x17, 0x2d } }, + { 0x80, { 0x64, 0x64, 0x64, 0x74, 0x64 } }, + { 0x83, { 0x06, 0x03, 0x04, 0x04, 0x04 } }, + { 0x84, { 0xff, 0xff, 0xff, 0xff, 0xff } }, + { 0x85, { 0x05, 0x05, 0x05, 0x05, 0x05 } }, + { 0x86, { 0x00, 0x00, 0x11, 0x11, 0x11 } }, + { 0x87, { 0x03, 0x03, 0x03, 0x03, 0x03 } }, + { 0x88, { 0x09, 0x09, 0x09, 0x09, 0x09 } }, + { 0x89, { 0x20, 0x20, 0x30, 0x20, 0x20 } }, + { 0x8a, { 0x03, 0x03, 0x02, 0x03, 0x02 } }, + { 0x8b, { 0x00, 0x07, 0x09, 0x00, 0x09 } }, + { 0x8c, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x8d, { 0x4f, 0x4f, 0x4f, 0x3f, 0x4f } }, + { 0x8e, { 0xf0, 0xf0, 0x60, 0xf0, 0xa0 } }, + { 0x8f, { 0xe8, 0xe8, 0xe8, 0xe8, 0xe8 } }, + { 0x90, { 0x10, 0x10, 0x10, 0x10, 0x10 } }, + { 0x91, { 0x40, 0x40, 0x70, 0x70, 0x10 } }, + { 0x92, { 0x00, 0x00, 0x00, 0x00, 0x04 } }, + { 0x93, { 0x60, 0x60, 0x60, 0x60, 0x60 } }, + { 0x94, { 0x00, 0x00, 0x00, 0x00, 0x03 } }, + { 0x95, { 0x09, 0x09, 0x47, 0x47, 0x47 } }, + { 0x96, { 0x80, 0xa0, 0xa0, 0x40, 0xa0 } }, + { 0x97, { 0x60, 0x60, 0x60, 0x60, 0x60 } }, + { 0x98, { 0x50, 0x50, 0x50, 0x30, 0x50 } }, + { 0x99, { 0x10, 0x10, 0x10, 0x10, 0x10 } }, + { 0x9a, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0x9b, { 0x40, 0x40, 0x40, 0x30, 0x40 } }, + { 0x9c, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xa0, { 0xf0, 0xf0, 0xf0, 0xf0, 0xf0 } }, + { 0xa1, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xa2, { 0x30, 0x30, 0x00, 0x30, 0x00 } }, + { 0xa3, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xa4, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xa5, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xa6, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xa7, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xa8, { 0x77, 0x77, 0x77, 0x77, 0x77 } }, + { 0xa9, { 0x02, 0x02, 0x02, 0x02, 0x02 } }, + { 0xaa, { 0x40, 0x40, 0x40, 0x40, 0x40 } }, + { 0xac, { 0x1f, 0x1f, 0x1f, 0x1f, 0x1f } }, + { 0xad, { 0x14, 0x14, 0x14, 0x14, 0x14 } }, + { 0xae, { 0x78, 0x78, 0x78, 0x78, 0x78 } }, + { 0xaf, { 0x06, 0x06, 0x06, 0x06, 0x07 } }, + { 0xb0, { 0x1b, 0x1b, 0x1b, 0x19, 0x1b } }, + { 0xb1, { 0x18, 0x17, 0x17, 0x18, 0x17 } }, + { 0xb2, { 0x35, 0x82, 0x82, 0x38, 0x82 } }, + { 0xb3, { 0xb6, 0xce, 0xc7, 0x5c, 0xb0 } }, + { 0xb4, { 0x3f, 0x3e, 0x3e, 0x3f, 0x3e } }, + { 0xb5, { 0x70, 0x58, 0x50, 0x68, 0x50 } }, + { 0xb6, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xb7, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xb8, { 0x03, 0x03, 0x01, 0x01, 0x01 } }, + { 0xb9, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xba, { 0x06, 0x06, 0x0a, 0x05, 0x0a } }, + { 0xbb, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xbc, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xbd, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xbe, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xbf, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xc0, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xc1, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xc2, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xc3, { 0x00, 0x00, 0x88, 0x66, 0x88 } }, + { 0xc4, { 0x10, 0x10, 0x00, 0x00, 0x00 } }, + { 0xc5, { 0x00, 0x00, 0x44, 0x60, 0x44 } }, + { 0xc6, { 0x10, 0x0a, 0x00, 0x00, 0x00 } }, + { 0xc7, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xc8, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xc9, { 0x90, 0x04, 0x00, 0x00, 0x00 } }, + { 0xca, { 0x90, 0x08, 0x01, 0x01, 0x01 } }, + { 0xcb, { 0xa0, 0x04, 0x00, 0x44, 0x00 } }, + { 0xcc, { 0xa0, 0x10, 0x03, 0x00, 0x03 } }, + { 0xcd, { 0x06, 0x06, 0x06, 0x05, 0x06 } }, + { 0xce, { 0x05, 0x05, 0x01, 0x01, 0x01 } }, + { 0xcf, { 0x40, 0x20, 0x18, 0x18, 0x18 } }, + { 0xd0, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xd1, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xd2, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xd3, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xd4, { 0x05, 0x05, 0x05, 0x05, 0x05 } }, + { 0xd5, { 0x05, 0x05, 0x05, 0x03, 0x05 } }, + { 0xd6, { 0xac, 0x22, 0xca, 0x8f, 0xca } }, + { 0xd7, { 0x20, 0x20, 0x20, 0x20, 0x20 } }, + { 0xd8, { 0x01, 0x01, 0x01, 0x01, 0x01 } }, + { 0xd9, { 0x00, 0x00, 0x0f, 0x00, 0x0f } }, + { 0xda, { 0x00, 0xff, 0xff, 0x0e, 0xff } }, + { 0xdb, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } }, + { 0xdc, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } }, + { 0xdd, { 0x05, 0x05, 0x05, 0x05, 0x05 } }, + { 0xde, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } }, + { 0xdf, { 0x42, 0x42, 0x44, 0x44, 0x04 } }, + { 0xe0, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xe1, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xe2, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xe3, { 0x00, 0x00, 0x26, 0x06, 0x26 } }, + { 0xe4, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xe5, { 0x01, 0x0a, 0x01, 0x01, 0x01 } }, + { 0xe6, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xe7, { 0x08, 0x08, 0x08, 0x08, 0x08 } }, + { 0xe8, { 0x63, 0x63, 0x63, 0x63, 0x63 } }, + { 0xe9, { 0x59, 0x59, 0x59, 0x59, 0x59 } }, + { 0xea, { 0x80, 0x80, 0x20, 0x80, 0x80 } }, + { 0xeb, { 0x37, 0x37, 0x78, 0x37, 0x77 } }, + { 0xec, { 0x1f, 0x1f, 0x25, 0x25, 0x25 } }, + { 0xed, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } }, + { 0xee, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, + { 0xef, { 0x70, 0x70, 0x58, 0x38, 0x58 } }, + { 0xf0, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, +}; + +#endif /* HD29L2_PRIV */ diff --git a/drivers/media/dvb-frontends/isl6405.c b/drivers/media/dvb-frontends/isl6405.c new file mode 100644 index 00000000..0c642a5b --- /dev/null +++ b/drivers/media/dvb-frontends/isl6405.c @@ -0,0 +1,164 @@ +/* + * isl6405.c - driver for dual lnb supply and control ic ISL6405 + * + * Copyright (C) 2008 Hartmut Hackmann + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "isl6405.h" + +struct isl6405 { + u8 config; + u8 override_or; + u8 override_and; + struct i2c_adapter *i2c; + u8 i2c_addr; +}; + +static int isl6405_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct isl6405 *isl6405 = (struct isl6405 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6405->i2c_addr, .flags = 0, + .buf = &isl6405->config, + .len = sizeof(isl6405->config) }; + + if (isl6405->override_or & 0x80) { + isl6405->config &= ~(ISL6405_VSEL2 | ISL6405_EN2); + switch (voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + isl6405->config |= ISL6405_EN2; + break; + case SEC_VOLTAGE_18: + isl6405->config |= (ISL6405_EN2 | ISL6405_VSEL2); + break; + default: + return -EINVAL; + } + } else { + isl6405->config &= ~(ISL6405_VSEL1 | ISL6405_EN1); + switch (voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + isl6405->config |= ISL6405_EN1; + break; + case SEC_VOLTAGE_18: + isl6405->config |= (ISL6405_EN1 | ISL6405_VSEL1); + break; + default: + return -EINVAL; + } + } + isl6405->config |= isl6405->override_or; + isl6405->config &= isl6405->override_and; + + return (i2c_transfer(isl6405->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int isl6405_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) +{ + struct isl6405 *isl6405 = (struct isl6405 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6405->i2c_addr, .flags = 0, + .buf = &isl6405->config, + .len = sizeof(isl6405->config) }; + + if (isl6405->override_or & 0x80) { + if (arg) + isl6405->config |= ISL6405_LLC2; + else + isl6405->config &= ~ISL6405_LLC2; + } else { + if (arg) + isl6405->config |= ISL6405_LLC1; + else + isl6405->config &= ~ISL6405_LLC1; + } + isl6405->config |= isl6405->override_or; + isl6405->config &= isl6405->override_and; + + return (i2c_transfer(isl6405->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static void isl6405_release(struct dvb_frontend *fe) +{ + /* power off */ + isl6405_set_voltage(fe, SEC_VOLTAGE_OFF); + + /* free */ + kfree(fe->sec_priv); + fe->sec_priv = NULL; +} + +struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, + u8 i2c_addr, u8 override_set, u8 override_clear) +{ + struct isl6405 *isl6405 = kmalloc(sizeof(struct isl6405), GFP_KERNEL); + if (!isl6405) + return NULL; + + /* default configuration */ + if (override_set & 0x80) + isl6405->config = ISL6405_ISEL2; + else + isl6405->config = ISL6405_ISEL1; + isl6405->i2c = i2c; + isl6405->i2c_addr = i2c_addr; + fe->sec_priv = isl6405; + + /* bits which should be forced to '1' */ + isl6405->override_or = override_set; + + /* bits which should be forced to '0' */ + isl6405->override_and = ~override_clear; + + /* detect if it is present or not */ + if (isl6405_set_voltage(fe, SEC_VOLTAGE_OFF)) { + kfree(isl6405); + fe->sec_priv = NULL; + return NULL; + } + + /* install release callback */ + fe->ops.release_sec = isl6405_release; + + /* override frontend ops */ + fe->ops.set_voltage = isl6405_set_voltage; + fe->ops.enable_high_lnb_voltage = isl6405_enable_high_lnb_voltage; + + return fe; +} +EXPORT_SYMBOL(isl6405_attach); + +MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6405"); +MODULE_AUTHOR("Hartmut Hackmann & Oliver Endriss"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/isl6405.h b/drivers/media/dvb-frontends/isl6405.h new file mode 100644 index 00000000..8abb70c2 --- /dev/null +++ b/drivers/media/dvb-frontends/isl6405.h @@ -0,0 +1,74 @@ +/* + * isl6405.h - driver for dual lnb supply and control ic ISL6405 + * + * Copyright (C) 2008 Hartmut Hackmann + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef _ISL6405_H +#define _ISL6405_H + +#include + +/* system register bits */ + +/* this bit selects register (control) 1 or 2 + note that the bit maps are different */ + +#define ISL6405_SR 0x80 + +/* SR = 0 */ +#define ISL6405_OLF1 0x01 +#define ISL6405_EN1 0x02 +#define ISL6405_VSEL1 0x04 +#define ISL6405_LLC1 0x08 +#define ISL6405_ENT1 0x10 +#define ISL6405_ISEL1 0x20 +#define ISL6405_DCL 0x40 + +/* SR = 1 */ +#define ISL6405_OLF2 0x01 +#define ISL6405_OTF 0x02 +#define ISL6405_EN2 0x04 +#define ISL6405_VSEL2 0x08 +#define ISL6405_LLC2 0x10 +#define ISL6405_ENT2 0x20 +#define ISL6405_ISEL2 0x40 + +#if IS_ENABLED(CONFIG_DVB_ISL6405) +/* override_set and override_clear control which system register bits (above) + * to always set & clear + */ +extern struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, + u8 i2c_addr, u8 override_set, u8 override_clear); +#else +static inline struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 i2c_addr, + u8 override_set, u8 override_clear) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_ISL6405 */ + +#endif diff --git a/drivers/media/dvb-frontends/isl6421.c b/drivers/media/dvb-frontends/isl6421.c new file mode 100644 index 00000000..c77002fc --- /dev/null +++ b/drivers/media/dvb-frontends/isl6421.c @@ -0,0 +1,167 @@ +/* + * isl6421.h - driver for lnb supply and control ic ISL6421 + * + * Copyright (C) 2006 Andrew de Quincey + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "isl6421.h" + +struct isl6421 { + u8 config; + u8 override_or; + u8 override_and; + struct i2c_adapter *i2c; + u8 i2c_addr; +}; + +static int isl6421_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, + .buf = &isl6421->config, + .len = sizeof(isl6421->config) }; + + isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); + + switch(voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + isl6421->config |= ISL6421_EN1; + break; + case SEC_VOLTAGE_18: + isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1); + break; + default: + return -EINVAL; + } + + isl6421->config |= isl6421->override_or; + isl6421->config &= isl6421->override_and; + + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) +{ + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, + .buf = &isl6421->config, + .len = sizeof(isl6421->config) }; + + if (arg) + isl6421->config |= ISL6421_LLC1; + else + isl6421->config &= ~ISL6421_LLC1; + + isl6421->config |= isl6421->override_or; + isl6421->config &= isl6421->override_and; + + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int isl6421_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, + .buf = &isl6421->config, + .len = sizeof(isl6421->config) }; + + switch (tone) { + case SEC_TONE_ON: + isl6421->config |= ISL6421_ENT1; + break; + case SEC_TONE_OFF: + isl6421->config &= ~ISL6421_ENT1; + break; + default: + return -EINVAL; + } + + isl6421->config |= isl6421->override_or; + isl6421->config &= isl6421->override_and; + + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static void isl6421_release(struct dvb_frontend *fe) +{ + /* power off */ + isl6421_set_voltage(fe, SEC_VOLTAGE_OFF); + + /* free */ + kfree(fe->sec_priv); + fe->sec_priv = NULL; +} + +struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, + u8 override_set, u8 override_clear, bool override_tone) +{ + struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL); + if (!isl6421) + return NULL; + + /* default configuration */ + isl6421->config = ISL6421_ISEL1; + isl6421->i2c = i2c; + isl6421->i2c_addr = i2c_addr; + fe->sec_priv = isl6421; + + /* bits which should be forced to '1' */ + isl6421->override_or = override_set; + + /* bits which should be forced to '0' */ + isl6421->override_and = ~override_clear; + + /* detect if it is present or not */ + if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) { + kfree(isl6421); + fe->sec_priv = NULL; + return NULL; + } + + /* install release callback */ + fe->ops.release_sec = isl6421_release; + + /* override frontend ops */ + fe->ops.set_voltage = isl6421_set_voltage; + fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage; + if (override_tone) + fe->ops.set_tone = isl6421_set_tone; + + return fe; +} +EXPORT_SYMBOL(isl6421_attach); + +MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421"); +MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/isl6421.h b/drivers/media/dvb-frontends/isl6421.h new file mode 100644 index 00000000..630e7f8a --- /dev/null +++ b/drivers/media/dvb-frontends/isl6421.h @@ -0,0 +1,55 @@ +/* + * isl6421.h - driver for lnb supply and control ic ISL6421 + * + * Copyright (C) 2006 Andrew de Quincey + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef _ISL6421_H +#define _ISL6421_H + +#include + +/* system register bits */ +#define ISL6421_OLF1 0x01 +#define ISL6421_EN1 0x02 +#define ISL6421_VSEL1 0x04 +#define ISL6421_LLC1 0x08 +#define ISL6421_ENT1 0x10 +#define ISL6421_ISEL1 0x20 +#define ISL6421_DCL 0x40 + +#if IS_ENABLED(CONFIG_DVB_ISL6421) +/* override_set and override_clear control which system register bits (above) to always set & clear */ +extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, + u8 override_set, u8 override_clear, bool override_tone); +#else +static inline struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, + u8 override_set, u8 override_clear, bool override_tone) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_ISL6421 + +#endif diff --git a/drivers/media/dvb-frontends/isl6423.c b/drivers/media/dvb-frontends/isl6423.c new file mode 100644 index 00000000..dca5bebf --- /dev/null +++ b/drivers/media/dvb-frontends/isl6423.c @@ -0,0 +1,308 @@ +/* + Intersil ISL6423 SEC and LNB Power supply controller + + Copyright (C) Manu Abraham + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "isl6423.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "Set Verbosity level"); + +#define FE_ERROR 0 +#define FE_NOTICE 1 +#define FE_INFO 2 +#define FE_DEBUG 3 +#define FE_DEBUGREG 4 + +#define dprintk(__y, __z, format, arg...) do { \ + if (__z) { \ + if ((verbose > FE_ERROR) && (verbose > __y)) \ + printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_NOTICE) && (verbose > __y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_INFO) && (verbose > __y)) \ + printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_DEBUG) && (verbose > __y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ + } else { \ + if (verbose > __y) \ + printk(format, ##arg); \ + } \ +} while (0) + +struct isl6423_dev { + const struct isl6423_config *config; + struct i2c_adapter *i2c; + + u8 reg_3; + u8 reg_4; + + unsigned int verbose; +}; + +static int isl6423_write(struct isl6423_dev *isl6423, u8 reg) +{ + struct i2c_adapter *i2c = isl6423->i2c; + u8 addr = isl6423->config->addr; + int err = 0; + + struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = ®, .len = 1 }; + + dprintk(FE_DEBUG, 1, "write reg %02X", reg); + err = i2c_transfer(i2c, &msg, 1); + if (err < 0) + goto exit; + return 0; + +exit: + dprintk(FE_ERROR, 1, "I/O error <%d>", err); + return err; +} + +static int isl6423_set_modulation(struct dvb_frontend *fe) +{ + struct isl6423_dev *isl6423 = (struct isl6423_dev *) fe->sec_priv; + const struct isl6423_config *config = isl6423->config; + int err = 0; + u8 reg_2 = 0; + + reg_2 = 0x01 << 5; + + if (config->mod_extern) + reg_2 |= (1 << 3); + else + reg_2 |= (1 << 4); + + err = isl6423_write(isl6423, reg_2); + if (err < 0) + goto exit; + return 0; + +exit: + dprintk(FE_ERROR, 1, "I/O error <%d>", err); + return err; +} + +static int isl6423_voltage_boost(struct dvb_frontend *fe, long arg) +{ + struct isl6423_dev *isl6423 = (struct isl6423_dev *) fe->sec_priv; + u8 reg_3 = isl6423->reg_3; + u8 reg_4 = isl6423->reg_4; + int err = 0; + + if (arg) { + /* EN = 1, VSPEN = 1, VBOT = 1 */ + reg_4 |= (1 << 4); + reg_4 |= 0x1; + reg_3 |= (1 << 3); + } else { + /* EN = 1, VSPEN = 1, VBOT = 0 */ + reg_4 |= (1 << 4); + reg_4 &= ~0x1; + reg_3 |= (1 << 3); + } + err = isl6423_write(isl6423, reg_3); + if (err < 0) + goto exit; + + err = isl6423_write(isl6423, reg_4); + if (err < 0) + goto exit; + + isl6423->reg_3 = reg_3; + isl6423->reg_4 = reg_4; + + return 0; +exit: + dprintk(FE_ERROR, 1, "I/O error <%d>", err); + return err; +} + + +static int isl6423_set_voltage(struct dvb_frontend *fe, + enum fe_sec_voltage voltage) +{ + struct isl6423_dev *isl6423 = (struct isl6423_dev *) fe->sec_priv; + u8 reg_3 = isl6423->reg_3; + u8 reg_4 = isl6423->reg_4; + int err = 0; + + switch (voltage) { + case SEC_VOLTAGE_OFF: + /* EN = 0 */ + reg_4 &= ~(1 << 4); + break; + + case SEC_VOLTAGE_13: + /* EN = 1, VSPEN = 1, VTOP = 0, VBOT = 0 */ + reg_4 |= (1 << 4); + reg_4 &= ~0x3; + reg_3 |= (1 << 3); + break; + + case SEC_VOLTAGE_18: + /* EN = 1, VSPEN = 1, VTOP = 1, VBOT = 0 */ + reg_4 |= (1 << 4); + reg_4 |= 0x2; + reg_4 &= ~0x1; + reg_3 |= (1 << 3); + break; + + default: + break; + } + err = isl6423_write(isl6423, reg_3); + if (err < 0) + goto exit; + + err = isl6423_write(isl6423, reg_4); + if (err < 0) + goto exit; + + isl6423->reg_3 = reg_3; + isl6423->reg_4 = reg_4; + + return 0; +exit: + dprintk(FE_ERROR, 1, "I/O error <%d>", err); + return err; +} + +static int isl6423_set_current(struct dvb_frontend *fe) +{ + struct isl6423_dev *isl6423 = (struct isl6423_dev *) fe->sec_priv; + u8 reg_3 = isl6423->reg_3; + const struct isl6423_config *config = isl6423->config; + int err = 0; + + switch (config->current_max) { + case SEC_CURRENT_275m: + /* 275mA */ + /* ISELH = 0, ISELL = 0 */ + reg_3 &= ~0x3; + break; + + case SEC_CURRENT_515m: + /* 515mA */ + /* ISELH = 0, ISELL = 1 */ + reg_3 &= ~0x2; + reg_3 |= 0x1; + break; + + case SEC_CURRENT_635m: + /* 635mA */ + /* ISELH = 1, ISELL = 0 */ + reg_3 &= ~0x1; + reg_3 |= 0x2; + break; + + case SEC_CURRENT_800m: + /* 800mA */ + /* ISELH = 1, ISELL = 1 */ + reg_3 |= 0x3; + break; + } + + err = isl6423_write(isl6423, reg_3); + if (err < 0) + goto exit; + + switch (config->curlim) { + case SEC_CURRENT_LIM_ON: + /* DCL = 0 */ + reg_3 &= ~0x10; + break; + + case SEC_CURRENT_LIM_OFF: + /* DCL = 1 */ + reg_3 |= 0x10; + break; + } + + err = isl6423_write(isl6423, reg_3); + if (err < 0) + goto exit; + + isl6423->reg_3 = reg_3; + + return 0; +exit: + dprintk(FE_ERROR, 1, "I/O error <%d>", err); + return err; +} + +static void isl6423_release(struct dvb_frontend *fe) +{ + isl6423_set_voltage(fe, SEC_VOLTAGE_OFF); + + kfree(fe->sec_priv); + fe->sec_priv = NULL; +} + +struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + const struct isl6423_config *config) +{ + struct isl6423_dev *isl6423; + + isl6423 = kzalloc(sizeof(struct isl6423_dev), GFP_KERNEL); + if (!isl6423) + return NULL; + + isl6423->config = config; + isl6423->i2c = i2c; + fe->sec_priv = isl6423; + + /* SR3H = 0, SR3M = 1, SR3L = 0 */ + isl6423->reg_3 = 0x02 << 5; + /* SR4H = 0, SR4M = 1, SR4L = 1 */ + isl6423->reg_4 = 0x03 << 5; + + if (isl6423_set_current(fe)) + goto exit; + + if (isl6423_set_modulation(fe)) + goto exit; + + fe->ops.release_sec = isl6423_release; + fe->ops.set_voltage = isl6423_set_voltage; + fe->ops.enable_high_lnb_voltage = isl6423_voltage_boost; + isl6423->verbose = verbose; + + return fe; + +exit: + kfree(isl6423); + fe->sec_priv = NULL; + return NULL; +} +EXPORT_SYMBOL(isl6423_attach); + +MODULE_DESCRIPTION("ISL6423 SEC"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/isl6423.h b/drivers/media/dvb-frontends/isl6423.h new file mode 100644 index 00000000..80dfd9cc --- /dev/null +++ b/drivers/media/dvb-frontends/isl6423.h @@ -0,0 +1,63 @@ +/* + Intersil ISL6423 SEC and LNB Power supply controller + + Copyright (C) Manu Abraham + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __ISL_6423_H +#define __ISL_6423_H + +#include + +enum isl6423_current { + SEC_CURRENT_275m = 0, + SEC_CURRENT_515m, + SEC_CURRENT_635m, + SEC_CURRENT_800m, +}; + +enum isl6423_curlim { + SEC_CURRENT_LIM_ON = 1, + SEC_CURRENT_LIM_OFF +}; + +struct isl6423_config { + enum isl6423_current current_max; + enum isl6423_curlim curlim; + u8 addr; + u8 mod_extern; +}; + +#if IS_ENABLED(CONFIG_DVB_ISL6423) + + +extern struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + const struct isl6423_config *config); + +#else +static inline struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + const struct isl6423_config *config) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_ISL6423 */ + +#endif /* __ISL_6423_H */ diff --git a/drivers/media/dvb-frontends/it913x-fe-priv.h b/drivers/media/dvb-frontends/it913x-fe-priv.h new file mode 100644 index 00000000..eb6fd8ae --- /dev/null +++ b/drivers/media/dvb-frontends/it913x-fe-priv.h @@ -0,0 +1,1051 @@ + +struct it913xset { u32 pro; + u32 address; + u8 reg[15]; + u8 count; +}; + +struct adctable { u32 adcFrequency; + u32 bandwidth; + u32 coeff_1_2048; + u32 coeff_1_4096; + u32 coeff_1_8191; + u32 coeff_1_8192; + u32 coeff_1_8193; + u32 coeff_2_2k; + u32 coeff_2_4k; + u32 coeff_2_8k; + u16 bfsfcw_fftinx_ratio; + u16 fftinx_bfsfcw_ratio; +}; + +/* clock and coeff tables only table 3 is used with IT9137*/ +/* TODO other tables relate AF9035 may be removed */ +static struct adctable tab1[] = { + { 20156250, 6000000, + 0x02b8ba6e, 0x015c5d37, 0x00ae340d, 0x00ae2e9b, 0x00ae292a, + 0x015c5d37, 0x00ae2e9b, 0x0057174e, 0x02f1, 0x015c }, + { 20156250, 7000000, + 0x032cd980, 0x01966cc0, 0x00cb3cba, 0x00cb3660, 0x00cb3007, + 0x01966cc0, 0x00cb3660, 0x00659b30, 0x0285, 0x0196 }, + { 20156250, 8000000, + 0x03a0f893, 0x01d07c49, 0x00e84567, 0x00e83e25, 0x00e836e3, + 0x01d07c49, 0x00e83e25, 0x00741f12, 0x0234, 0x01d0 }, + { 20156250, 5000000, + 0x02449b5c, 0x01224dae, 0x00912b60, 0x009126d7, 0x0091224e, + 0x01224dae, 0x009126d7, 0x0048936b, 0x0387, 0x0122 } +}; + +static struct adctable tab2[] = { + { 20187500, 6000000, + 0x02b7a654, 0x015bd32a, 0x00adef04, 0x00ade995, 0x00ade426, + 0x015bd32a, 0x00ade995, 0x0056f4ca, 0x02f2, 0x015c }, + { 20187500, 7000000, + 0x032b9761, 0x0195cbb1, 0x00caec30, 0x00cae5d8, 0x00cadf81, + 0x0195cbb1, 0x00cae5d8, 0x006572ec, 0x0286, 0x0196 }, + { 20187500, 8000000, + 0x039f886f, 0x01cfc438, 0x00e7e95b, 0x00e7e21c, 0x00e7dadd, + 0x01cfc438, 0x00e7e21c, 0x0073f10e, 0x0235, 0x01d0 }, + { 20187500, 5000000, + 0x0243b546, 0x0121daa3, 0x0090f1d9, 0x0090ed51, 0x0090e8ca, + 0x0121daa3, 0x0090ed51, 0x004876a9, 0x0388, 0x0122 } + +}; + +static struct adctable tab3[] = { + { 20250000, 6000000, + 0x02b580ad, 0x015ac057, 0x00ad6597, 0x00ad602b, 0x00ad5ac1, + 0x015ac057, 0x00ad602b, 0x0056b016, 0x02f4, 0x015b }, + { 20250000, 7000000, + 0x03291620, 0x01948b10, 0x00ca4bda, 0x00ca4588, 0x00ca3f36, + 0x01948b10, 0x00ca4588, 0x006522c4, 0x0288, 0x0195 }, + { 20250000, 8000000, + 0x039cab92, 0x01ce55c9, 0x00e7321e, 0x00e72ae4, 0x00e723ab, + 0x01ce55c9, 0x00e72ae4, 0x00739572, 0x0237, 0x01ce }, + { 20250000, 5000000, + 0x0241eb3b, 0x0120f59e, 0x00907f53, 0x00907acf, 0x0090764b, + 0x0120f59e, 0x00907acf, 0x00483d67, 0x038b, 0x0121 } + +}; + +static struct adctable tab4[] = { + { 20583333, 6000000, + 0x02aa4598, 0x015522cc, 0x00aa96bb, 0x00aa9166, 0x00aa8c12, + 0x015522cc, 0x00aa9166, 0x005548b3, 0x0300, 0x0155 }, + { 20583333, 7000000, + 0x031bfbdc, 0x018dfdee, 0x00c7052f, 0x00c6fef7, 0x00c6f8bf, + 0x018dfdee, 0x00c6fef7, 0x00637f7b, 0x0293, 0x018e }, + { 20583333, 8000000, + 0x038db21f, 0x01c6d910, 0x00e373a3, 0x00e36c88, 0x00e3656d, + 0x01c6d910, 0x00e36c88, 0x0071b644, 0x0240, 0x01c7 }, + { 20583333, 5000000, + 0x02388f54, 0x011c47aa, 0x008e2846, 0x008e23d5, 0x008e1f64, + 0x011c47aa, 0x008e23d5, 0x004711ea, 0x039a, 0x011c } + +}; + +static struct adctable tab5[] = { + { 20416667, 6000000, + 0x02afd765, 0x0157ebb3, 0x00abfb39, 0x00abf5d9, 0x00abf07a, + 0x0157ebb3, 0x00abf5d9, 0x0055faed, 0x02fa, 0x0158 }, + { 20416667, 7000000, + 0x03227b4b, 0x01913da6, 0x00c8a518, 0x00c89ed3, 0x00c8988e, + 0x01913da6, 0x00c89ed3, 0x00644f69, 0x028d, 0x0191 }, + { 20416667, 8000000, + 0x03951f32, 0x01ca8f99, 0x00e54ef7, 0x00e547cc, 0x00e540a2, + 0x01ca8f99, 0x00e547cc, 0x0072a3e6, 0x023c, 0x01cb }, + { 20416667, 5000000, + 0x023d337f, 0x011e99c0, 0x008f515a, 0x008f4ce0, 0x008f4865, + 0x011e99c0, 0x008f4ce0, 0x0047a670, 0x0393, 0x011f } + +}; + +static struct adctable tab6[] = { + { 20480000, 6000000, + 0x02adb6db, 0x0156db6e, 0x00ab7312, 0x00ab6db7, 0x00ab685c, + 0x0156db6e, 0x00ab6db7, 0x0055b6db, 0x02fd, 0x0157 }, + { 20480000, 7000000, + 0x03200000, 0x01900000, 0x00c80640, 0x00c80000, 0x00c7f9c0, + 0x01900000, 0x00c80000, 0x00640000, 0x028f, 0x0190 }, + { 20480000, 8000000, + 0x03924925, 0x01c92492, 0x00e4996e, 0x00e49249, 0x00e48b25, + 0x01c92492, 0x00e49249, 0x00724925, 0x023d, 0x01c9 }, + { 20480000, 5000000, + 0x023b6db7, 0x011db6db, 0x008edfe5, 0x008edb6e, 0x008ed6f7, + 0x011db6db, 0x008edb6e, 0x00476db7, 0x0396, 0x011e } +}; + +static struct adctable tab7[] = { + { 20500000, 6000000, + 0x02ad0b99, 0x015685cc, 0x00ab4840, 0x00ab42e6, 0x00ab3d8c, + 0x015685cc, 0x00ab42e6, 0x0055a173, 0x02fd, 0x0157 }, + { 20500000, 7000000, + 0x031f3832, 0x018f9c19, 0x00c7d44b, 0x00c7ce0c, 0x00c7c7ce, + 0x018f9c19, 0x00c7ce0c, 0x0063e706, 0x0290, 0x0190 }, + { 20500000, 8000000, + 0x039164cb, 0x01c8b266, 0x00e46056, 0x00e45933, 0x00e45210, + 0x01c8b266, 0x00e45933, 0x00722c99, 0x023e, 0x01c9 }, + { 20500000, 5000000, + 0x023adeff, 0x011d6f80, 0x008ebc36, 0x008eb7c0, 0x008eb34a, + 0x011d6f80, 0x008eb7c0, 0x00475be0, 0x0396, 0x011d } + +}; + +static struct adctable tab8[] = { + { 20625000, 6000000, + 0x02a8e4bd, 0x0154725e, 0x00aa3e81, 0x00aa392f, 0x00aa33de, + 0x0154725e, 0x00aa392f, 0x00551c98, 0x0302, 0x0154 }, + { 20625000, 7000000, + 0x031a6032, 0x018d3019, 0x00c69e41, 0x00c6980c, 0x00c691d8, + 0x018d3019, 0x00c6980c, 0x00634c06, 0x0294, 0x018d }, + { 20625000, 8000000, + 0x038bdba6, 0x01c5edd3, 0x00e2fe02, 0x00e2f6ea, 0x00e2efd2, + 0x01c5edd3, 0x00e2f6ea, 0x00717b75, 0x0242, 0x01c6 }, + { 20625000, 5000000, + 0x02376948, 0x011bb4a4, 0x008ddec1, 0x008dda52, 0x008dd5e3, + 0x011bb4a4, 0x008dda52, 0x0046ed29, 0x039c, 0x011c } + +}; + +struct table { + u32 xtal; + struct adctable *table; +}; + +static struct table fe_clockTable[] = { + {12000000, tab3}, /* 12.00MHz */ + {20480000, tab6}, /* 20.48MHz */ + {36000000, tab3}, /* 36.00MHz */ + {30000000, tab1}, /* 30.00MHz */ + {26000000, tab4}, /* 26.00MHz */ + {28000000, tab5}, /* 28.00MHz */ + {32000000, tab7}, /* 32.00MHz */ + {34000000, tab2}, /* 34.00MHz */ + {24000000, tab1}, /* 24.00MHz */ + {22000000, tab8}, /* 22.00MHz */ +}; + +/* fe get */ +fe_code_rate_t fe_code[] = { + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_5_6, + FEC_7_8, + FEC_NONE, +}; + +fe_guard_interval_t fe_gi[] = { + GUARD_INTERVAL_1_32, + GUARD_INTERVAL_1_16, + GUARD_INTERVAL_1_8, + GUARD_INTERVAL_1_4, +}; + +fe_hierarchy_t fe_hi[] = { + HIERARCHY_NONE, + HIERARCHY_1, + HIERARCHY_2, + HIERARCHY_4, +}; + +fe_transmit_mode_t fe_mode[] = { + TRANSMISSION_MODE_2K, + TRANSMISSION_MODE_8K, + TRANSMISSION_MODE_4K, +}; + +fe_modulation_t fe_con[] = { + QPSK, + QAM_16, + QAM_64, +}; + +enum { + PRIORITY_HIGH = 0, /* High-priority stream */ + PRIORITY_LOW, /* Low-priority stream */ +}; + +/* Standard demodulator functions */ +static struct it913xset set_solo_fe[] = { + {PRO_LINK, GPIOH5_EN, {0x01}, 0x01}, + {PRO_LINK, GPIOH5_ON, {0x01}, 0x01}, + {PRO_LINK, GPIOH5_O, {0x00}, 0x01}, + {PRO_LINK, GPIOH5_O, {0x01}, 0x01}, + {PRO_LINK, DVBT_INTEN, {0x04}, 0x01}, + {PRO_LINK, DVBT_ENABLE, {0x05}, 0x01}, + {PRO_DMOD, MP2IF_MPEG_PAR_MODE, {0x00}, 0x01}, + {PRO_LINK, HOSTB_MPEG_SER_MODE, {0x00}, 0x01}, + {PRO_LINK, HOSTB_MPEG_PAR_MODE, {0x00}, 0x01}, + {PRO_DMOD, DCA_UPPER_CHIP, {0x00}, 0x01}, + {PRO_LINK, HOSTB_DCA_UPPER, {0x00}, 0x01}, + {PRO_DMOD, DCA_LOWER_CHIP, {0x00}, 0x01}, + {PRO_LINK, HOSTB_DCA_LOWER, {0x00}, 0x01}, + {PRO_DMOD, DCA_PLATCH, {0x00}, 0x01}, + {PRO_DMOD, DCA_FPGA_LATCH, {0x00}, 0x01}, + {PRO_DMOD, DCA_STAND_ALONE, {0x01}, 0x01}, + {PRO_DMOD, DCA_ENABLE, {0x00}, 0x01}, + {PRO_DMOD, MP2IF_MPEG_PAR_MODE, {0x00}, 0x01}, + {PRO_DMOD, BFS_FCW, {0x00, 0x00, 0x00}, 0x03}, + {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */ +}; + + +static struct it913xset init_1[] = { + {PRO_LINK, LOCK3_OUT, {0x01}, 0x01}, + {PRO_LINK, PADMISCDRSR, {0x01}, 0x01}, + {PRO_LINK, PADMISCDR2, {0x00}, 0x01}, + {PRO_DMOD, 0xec57, {0x00, 0x00}, 0x02}, + {PRO_LINK, PADMISCDR4, {0x00}, 0x01}, /* Power up */ + {PRO_LINK, PADMISCDR8, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + + +/* Version 1 types */ +static struct it913xset it9135_v1[] = { + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a}, 0x01}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a}, 0x01}, + {PRO_DMOD, 0x008a, {0x01}, 0x01}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06}, 0x01}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009f, {0xe1}, 0x01}, + {PRO_DMOD, 0x00a0, {0xcf}, 0x01}, + {PRO_DMOD, 0x00a3, {0x01}, 0x01}, + {PRO_DMOD, 0x00a5, {0x01}, 0x01}, + {PRO_DMOD, 0x00a6, {0x01}, 0x01}, + {PRO_DMOD, 0x00a9, {0x00}, 0x01}, + {PRO_DMOD, 0x00aa, {0x01}, 0x01}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00c2, {0x05}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf016, {0x10}, 0x01}, + {PRO_DMOD, 0xf017, {0x04}, 0x01}, + {PRO_DMOD, 0xf018, {0x05}, 0x01}, + {PRO_DMOD, 0xf019, {0x04}, 0x01}, + {PRO_DMOD, 0xf01a, {0x05}, 0x01}, + {PRO_DMOD, 0xf021, {0x03}, 0x01}, + {PRO_DMOD, 0xf022, {0x0a}, 0x01}, + {PRO_DMOD, 0xf023, {0x0a}, 0x01}, + {PRO_DMOD, 0xf02b, {0x00}, 0x01}, + {PRO_DMOD, 0xf02c, {0x01}, 0x01}, + {PRO_DMOD, 0xf064, {0x03}, 0x01}, + {PRO_DMOD, 0xf065, {0xf9}, 0x01}, + {PRO_DMOD, 0xf066, {0x03}, 0x01}, + {PRO_DMOD, 0xf067, {0x01}, 0x01}, + {PRO_DMOD, 0xf06f, {0xe0}, 0x01}, + {PRO_DMOD, 0xf070, {0x03}, 0x01}, + {PRO_DMOD, 0xf072, {0x0f}, 0x01}, + {PRO_DMOD, 0xf073, {0x03}, 0x01}, + {PRO_DMOD, 0xf078, {0x00}, 0x01}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f}, 0x01}, + {PRO_DMOD, 0xf09c, {0x00}, 0x01}, + {PRO_DMOD, 0xf09d, {0x20}, 0x01}, + {PRO_DMOD, 0xf09e, {0x00}, 0x01}, + {PRO_DMOD, 0xf09f, {0x0c}, 0x01}, + {PRO_DMOD, 0xf0a0, {0x00}, 0x01}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00}, 0x01}, + {PRO_DMOD, 0xf14d, {0x00}, 0x01}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00}, 0x01}, + {PRO_DMOD, 0xf15b, {0x08}, 0x01}, + {PRO_DMOD, 0xf15d, {0x03}, 0x01}, + {PRO_DMOD, 0xf15e, {0x05}, 0x01}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01}, 0x01}, + {PRO_DMOD, 0xf167, {0x40}, 0x01}, + {PRO_DMOD, 0xf168, {0x0f}, 0x01}, + {PRO_DMOD, 0xf17a, {0x00}, 0x01}, + {PRO_DMOD, 0xf17b, {0x00}, 0x01}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36}, 0x01}, + {PRO_DMOD, 0xf1bd, {0x00}, 0x01}, + {PRO_DMOD, 0xf1cb, {0xa0}, 0x01}, + {PRO_DMOD, 0xf1cc, {0x01}, 0x01}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf40e, {0x0a}, 0x01}, + {PRO_DMOD, 0xf40f, {0x40}, 0x01}, + {PRO_DMOD, 0xf410, {0x08}, 0x01}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15}, 0x01}, + {PRO_DMOD, 0xf562, {0x20}, 0x01}, + {PRO_DMOD, 0xf5df, {0xfb}, 0x01}, + {PRO_DMOD, 0xf5e0, {0x00}, 0x01}, + {PRO_DMOD, 0xf5e3, {0x09}, 0x01}, + {PRO_DMOD, 0xf5e4, {0x01}, 0x01}, + {PRO_DMOD, 0xf5e5, {0x01}, 0x01}, + {PRO_DMOD, 0xf5f8, {0x01}, 0x01}, + {PRO_DMOD, 0xf5fd, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, {0x05}, 0x01}, + {PRO_DMOD, 0xf601, {0x08}, 0x01}, + {PRO_DMOD, 0xf602, {0x0b}, 0x01}, + {PRO_DMOD, 0xf603, {0x0e}, 0x01}, + {PRO_DMOD, 0xf604, {0x11}, 0x01}, + {PRO_DMOD, 0xf605, {0x14}, 0x01}, + {PRO_DMOD, 0xf606, {0x17}, 0x01}, + {PRO_DMOD, 0xf607, {0x1f}, 0x01}, + {PRO_DMOD, 0xf60e, {0x00}, 0x01}, + {PRO_DMOD, 0xf60f, {0x04}, 0x01}, + {PRO_DMOD, 0xf610, {0x32}, 0x01}, + {PRO_DMOD, 0xf611, {0x10}, 0x01}, + {PRO_DMOD, 0xf707, {0xfc}, 0x01}, + {PRO_DMOD, 0xf708, {0x00}, 0x01}, + {PRO_DMOD, 0xf709, {0x37}, 0x01}, + {PRO_DMOD, 0xf70a, {0x00}, 0x01}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40}, 0x01}, + {PRO_DMOD, 0xf810, {0x54}, 0x01}, + {PRO_DMOD, 0xf811, {0x5a}, 0x01}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_38[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x38}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x0a}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xc8, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02}, + {PRO_DMOD, 0x0081, { 0x0a, 0x12, 0x02, 0x0a, 0x03, 0xc8, 0xb8, + 0xd0, 0xc3, 0x01}, 0x0a}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x32}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03}, + {PRO_DMOD, 0x00c4, {0x00}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03}, + {PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x02, 0x02, 0x02, 0x09, 0x50, 0x7b, 0x77, + 0x00, 0x02, 0xc8, 0x05, 0x7b}, 0x0c}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04}, + {PRO_DMOD, 0x011a, {0xc8, 0x7b, 0x8a, 0xa0}, 0x04}, + {PRO_DMOD, 0x0122, {0x02, 0x18, 0xc3}, 0x03}, + {PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02}, + {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04}, + {PRO_DMOD, 0x0137, {0x01, 0x00, 0x07, 0x00, 0x06}, 0x05}, + {PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xc8, 0x59}, 0x05}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf085, {0x00, 0x02, 0x00}, 0x03}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf5f8, {0x01}, 0x01}, + {PRO_DMOD, 0xf5fd, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_51[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x51}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x0a}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x06, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xc8, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02}, + {PRO_DMOD, 0x0081, { 0x0a, 0x12, 0x02, 0x0a, 0x03, 0xc0, 0x96, + 0xcf, 0xc3, 0x01}, 0x0a}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3c}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03}, + {PRO_DMOD, 0x00c4, {0x00}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03}, + {PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x03, 0x02, 0x02, 0x09, 0x50, 0x7a, 0x77, + 0x01, 0x02, 0xb0, 0x02, 0x7a}, 0x0c}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04}, + {PRO_DMOD, 0x011a, {0xc0, 0x7a, 0xac, 0x8c}, 0x04}, + {PRO_DMOD, 0x0122, {0x02, 0x70, 0xa4}, 0x03}, + {PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02}, + {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04}, + {PRO_DMOD, 0x0137, {0x01, 0x00, 0x07, 0x00, 0x06}, 0x05}, + {PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xc0, 0x59}, 0x05}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf085, {0xc0, 0x01, 0x00}, 0x03}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf5f8, {0x01}, 0x01}, + {PRO_DMOD, 0xf5fd, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_52[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x52}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x10}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xa0, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02}, + {PRO_DMOD, 0x0081, { 0x0a, 0x12, 0x03, 0x0a, 0x03, 0xb3, 0x97, + 0xc0, 0x9e, 0x01}, 0x0a}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5c, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3c}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03}, + {PRO_DMOD, 0x00c4, {0x00}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03}, + {PRO_DMOD, 0x00f3, {0x05, 0x91, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x03, 0x02, 0x02, 0x09, 0x50, 0x74, 0x77, + 0x02, 0x02, 0xae, 0x02, 0x6e}, 0x0c}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04}, + {PRO_DMOD, 0x011a, {0xcd, 0x62, 0xa4, 0x8c}, 0x04}, + {PRO_DMOD, 0x0122, {0x03, 0x18, 0x9e}, 0x03}, + {PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02}, + {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04}, + {PRO_DMOD, 0x0137, {0x00, 0x00, 0x07, 0x00, 0x06}, 0x05}, + {PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xb6, 0x59}, 0x05}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf085, {0xc0, 0x01, 0x00}, 0x03}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf5f8, {0x01}, 0x01}, + {PRO_DMOD, 0xf5fd, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, {0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +/* Version 2 types */ +static struct it913xset it9135_v2[] = { + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a}, 0x01}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a}, 0x01}, + {PRO_DMOD, 0x008a, {0x01}, 0x01}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06}, 0x01}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009f, {0xe1}, 0x01}, + {PRO_DMOD, 0x00a0, {0xcf}, 0x01}, + {PRO_DMOD, 0x00a3, {0x01}, 0x01}, + {PRO_DMOD, 0x00a5, {0x01}, 0x01}, + {PRO_DMOD, 0x00a6, {0x01}, 0x01}, + {PRO_DMOD, 0x00a9, {0x00}, 0x01}, + {PRO_DMOD, 0x00aa, {0x01}, 0x01}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00c2, {0x05}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf02b, {0x00}, 0x01}, + {PRO_DMOD, 0xf064, {0x03}, 0x01}, + {PRO_DMOD, 0xf065, {0xf9}, 0x01}, + {PRO_DMOD, 0xf066, {0x03}, 0x01}, + {PRO_DMOD, 0xf067, {0x01}, 0x01}, + {PRO_DMOD, 0xf06f, {0xe0}, 0x01}, + {PRO_DMOD, 0xf070, {0x03}, 0x01}, + {PRO_DMOD, 0xf072, {0x0f}, 0x01}, + {PRO_DMOD, 0xf073, {0x03}, 0x01}, + {PRO_DMOD, 0xf078, {0x00}, 0x01}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f}, 0x01}, + {PRO_DMOD, 0xf09c, {0x00}, 0x01}, + {PRO_DMOD, 0xf09d, {0x20}, 0x01}, + {PRO_DMOD, 0xf09e, {0x00}, 0x01}, + {PRO_DMOD, 0xf09f, {0x0c}, 0x01}, + {PRO_DMOD, 0xf0a0, {0x00}, 0x01}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00}, 0x01}, + {PRO_DMOD, 0xf14d, {0x00}, 0x01}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00}, 0x01}, + {PRO_DMOD, 0xf15b, {0x08}, 0x01}, + {PRO_DMOD, 0xf15d, {0x03}, 0x01}, + {PRO_DMOD, 0xf15e, {0x05}, 0x01}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01}, 0x01}, + {PRO_DMOD, 0xf167, {0x40}, 0x01}, + {PRO_DMOD, 0xf168, {0x0f}, 0x01}, + {PRO_DMOD, 0xf17a, {0x00}, 0x01}, + {PRO_DMOD, 0xf17b, {0x00}, 0x01}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36}, 0x01}, + {PRO_DMOD, 0xf1bd, {0x00}, 0x01}, + {PRO_DMOD, 0xf1cb, {0xa0}, 0x01}, + {PRO_DMOD, 0xf1cc, {0x01}, 0x01}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf40e, {0x0a}, 0x01}, + {PRO_DMOD, 0xf40f, {0x40}, 0x01}, + {PRO_DMOD, 0xf410, {0x08}, 0x01}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15}, 0x01}, + {PRO_DMOD, 0xf562, {0x20}, 0x01}, + {PRO_DMOD, 0xf5e3, {0x09}, 0x01}, + {PRO_DMOD, 0xf5e4, {0x01}, 0x01}, + {PRO_DMOD, 0xf5e5, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, {0x05}, 0x01}, + {PRO_DMOD, 0xf601, {0x08}, 0x01}, + {PRO_DMOD, 0xf602, {0x0b}, 0x01}, + {PRO_DMOD, 0xf603, {0x0e}, 0x01}, + {PRO_DMOD, 0xf604, {0x11}, 0x01}, + {PRO_DMOD, 0xf605, {0x14}, 0x01}, + {PRO_DMOD, 0xf606, {0x17}, 0x01}, + {PRO_DMOD, 0xf607, {0x1f}, 0x01}, + {PRO_DMOD, 0xf60e, {0x00}, 0x01}, + {PRO_DMOD, 0xf60f, {0x04}, 0x01}, + {PRO_DMOD, 0xf610, {0x32}, 0x01}, + {PRO_DMOD, 0xf611, {0x10}, 0x01}, + {PRO_DMOD, 0xf707, {0xfc}, 0x01}, + {PRO_DMOD, 0xf708, {0x00}, 0x01}, + {PRO_DMOD, 0xf709, {0x37}, 0x01}, + {PRO_DMOD, 0xf70a, {0x00}, 0x01}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40}, 0x01}, + {PRO_DMOD, 0xf810, {0x54}, 0x01}, + {PRO_DMOD, 0xf811, {0x5a}, 0x01}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_60[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x60}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x0a}, 0x01}, + {PRO_DMOD, 0x006a, {0x03}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x8c, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02}, + {PRO_DMOD, 0x0084, {0x0a, 0x33, 0xbe, 0xa0, 0xc6, 0xb6, 0x01}, 0x07}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04}, + {PRO_DMOD, 0x00f3, {0x05, 0xa0, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x03, 0x03, 0x02, 0x0a, 0x50, 0x7b, 0x8c, + 0x00, 0x02, 0xbe, 0x00}, 0x0b}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02}, + {PRO_DMOD, 0x011a, {0xbe}, 0x01}, + {PRO_DMOD, 0x0124, {0xae}, 0x01}, + {PRO_DMOD, 0x0127, {0x00}, 0x01}, + {PRO_DMOD, 0x012a, {0x56, 0x50, 0x47, 0x42}, 0x04}, + {PRO_DMOD, 0x0137, {0x00}, 0x01}, + {PRO_DMOD, 0x013b, {0x08}, 0x01}, + {PRO_DMOD, 0x013f, {0x5b}, 0x01}, + {PRO_DMOD, 0x0141, { 0x59, 0xf9, 0x19, 0x19, 0x8c, 0x8c, 0x8c, + 0x6e, 0x8c, 0x50, 0x8c, 0x8c, 0xac, 0xc6, + 0x33}, 0x0f}, + {PRO_DMOD, 0x0151, {0x28}, 0x01}, + {PRO_DMOD, 0x0153, {0xbc}, 0x01}, + {PRO_DMOD, 0x0178, {0x09}, 0x01}, + {PRO_DMOD, 0x0181, {0x94, 0x6e}, 0x02}, + {PRO_DMOD, 0x0185, {0x24}, 0x01}, + {PRO_DMOD, 0x0187, {0x00, 0x00, 0xbe, 0x02, 0x80}, 0x05}, + {PRO_DMOD, 0xed02, {0xff}, 0x01}, + {PRO_DMOD, 0xee42, {0xff}, 0x01}, + {PRO_DMOD, 0xee82, {0xff}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf600, {0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17 + , 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_61[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x61}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x06}, 0x01}, + {PRO_DMOD, 0x006a, {0x03}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x90, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02}, + {PRO_DMOD, 0x0084, {0x0a, 0x33, 0xbc, 0x9c, 0xcc, 0xa8, 0x01}, 0x07}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5c, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04}, + {PRO_DMOD, 0x00f3, {0x05, 0xa0, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x03, 0x03, 0x02, 0x08, 0x50, 0x7b, 0x8c, + 0x01, 0x02, 0xc8, 0x00}, 0x0b}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02}, + {PRO_DMOD, 0x011a, {0xc6}, 0x01}, + {PRO_DMOD, 0x0124, {0xa8}, 0x01}, + {PRO_DMOD, 0x0127, {0x00}, 0x01}, + {PRO_DMOD, 0x012a, {0x59, 0x50, 0x47, 0x42}, 0x04}, + {PRO_DMOD, 0x0137, {0x00}, 0x01}, + {PRO_DMOD, 0x013b, {0x05}, 0x01}, + {PRO_DMOD, 0x013f, {0x5b}, 0x01}, + {PRO_DMOD, 0x0141, { 0x59, 0xf9, 0x59, 0x59, 0x8c, 0x8c, 0x8c, + 0x7b, 0x8c, 0x50, 0x8c, 0x8c, 0xa8, 0xc6, + 0x33}, 0x0f}, + {PRO_DMOD, 0x0151, {0x28}, 0x01}, + {PRO_DMOD, 0x0153, {0xcc}, 0x01}, + {PRO_DMOD, 0x0178, {0x09}, 0x01}, + {PRO_DMOD, 0x0181, {0x9c, 0x76}, 0x02}, + {PRO_DMOD, 0x0185, {0x28}, 0x01}, + {PRO_DMOD, 0x0187, {0x01, 0x00, 0xaa, 0x02, 0x80}, 0x05}, + {PRO_DMOD, 0xed02, {0xff}, 0x01}, + {PRO_DMOD, 0xee42, {0xff}, 0x01}, + {PRO_DMOD, 0xee82, {0xff}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_62[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x62}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x0a}, 0x01}, + {PRO_DMOD, 0x006a, {0x03}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x8c, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02}, + {PRO_DMOD, 0x0084, { 0x0a, 0x33, 0xb8, 0x9c, 0xb2, 0xa6, 0x01}, + 0x07}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04}, + {PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x02, 0x03, 0x02, 0x09, 0x50, 0x6e, 0x8c, + 0x02, 0x02, 0xc2, 0x00}, 0x0b}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02}, + {PRO_DMOD, 0x011a, {0xb8}, 0x01}, + {PRO_DMOD, 0x0124, {0xa8}, 0x01}, + {PRO_DMOD, 0x0127, {0x00}, 0x01}, + {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04}, + {PRO_DMOD, 0x0137, {0x00}, 0x01}, + {PRO_DMOD, 0x013b, {0x05}, 0x01}, + {PRO_DMOD, 0x013f, {0x5b}, 0x01}, + {PRO_DMOD, 0x0141, { 0x59, 0xf9, 0x59, 0x19, 0x8c, 0x8c, 0x8c, + 0x7b, 0x8c, 0x50, 0x70, 0x8c, 0x96, 0xd0, + 0x33}, 0x0f}, + {PRO_DMOD, 0x0151, {0x28}, 0x01}, + {PRO_DMOD, 0x0153, {0xb2}, 0x01}, + {PRO_DMOD, 0x0178, {0x09}, 0x01}, + {PRO_DMOD, 0x0181, {0x9c, 0x6e}, 0x02}, + {PRO_DMOD, 0x0185, {0x24}, 0x01}, + {PRO_DMOD, 0x0187, {0x00, 0x00, 0xb8, 0x02, 0x80}, 0x05}, + {PRO_DMOD, 0xed02, {0xff}, 0x01}, + {PRO_DMOD, 0xee42, {0xff}, 0x01}, + {PRO_DMOD, 0xee82, {0xff}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +/* Tuner setting scripts (still keeping it9137) */ +static struct it913xset it9137_tuner_off[] = { + {PRO_DMOD, 0xfba8, {0x01}, 0x01}, /* Tuner Clock Off */ + {PRO_DMOD, 0xec40, {0x00}, 0x01}, /* Power Down Tuner */ + {PRO_DMOD, 0xec02, {0x3f, 0x1f, 0x3f, 0x3f}, 0x04}, + {PRO_DMOD, 0xec06, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00}, 0x0c}, + {PRO_DMOD, 0xec12, {0x00, 0x00, 0x00, 0x00}, 0x04}, + {PRO_DMOD, 0xec17, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00}, 0x09}, + {PRO_DMOD, 0xec22, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00}, 0x0a}, + {PRO_DMOD, 0xec20, {0x00}, 0x01}, + {PRO_DMOD, 0xec3f, {0x01}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */ +}; + +static struct it913xset set_it9135_template[] = { + {PRO_DMOD, 0xee06, {0x00}, 0x01}, + {PRO_DMOD, 0xec56, {0x00}, 0x01}, + {PRO_DMOD, 0xec4c, {0x00}, 0x01}, + {PRO_DMOD, 0xec4d, {0x00}, 0x01}, + {PRO_DMOD, 0xec4e, {0x00}, 0x01}, + {PRO_DMOD, 0x011e, {0x00}, 0x01}, /* Older Devices */ + {PRO_DMOD, 0x011f, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */ +}; + +static struct it913xset set_it9137_template[] = { + {PRO_DMOD, 0xee06, {0x00}, 0x01}, + {PRO_DMOD, 0xec56, {0x00}, 0x01}, + {PRO_DMOD, 0xec4c, {0x00}, 0x01}, + {PRO_DMOD, 0xec4d, {0x00}, 0x01}, + {PRO_DMOD, 0xec4e, {0x00}, 0x01}, + {PRO_DMOD, 0xec4f, {0x00}, 0x01}, + {PRO_DMOD, 0xec50, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */ +}; diff --git a/drivers/media/dvb-frontends/it913x-fe.c b/drivers/media/dvb-frontends/it913x-fe.c new file mode 100644 index 00000000..6e1c6eb3 --- /dev/null +++ b/drivers/media/dvb-frontends/it913x-fe.c @@ -0,0 +1,1045 @@ +/* + * Driver for it913x-fe Frontend + * + * with support for on chip it9137 integral tuner + * + * Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com) + * IT9137 Copyright (C) ITE Tech Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "it913x-fe.h" +#include "it913x-fe-priv.h" + +static int it913x_debug; + +module_param_named(debug, it913x_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); + +#define dprintk(level, args...) do { \ + if (level & it913x_debug) \ + printk(KERN_DEBUG "it913x-fe: " args); \ +} while (0) + +#define deb_info(args...) dprintk(0x01, args) +#define debug_data_snipet(level, name, p) \ + dprintk(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \ + *p, *(p+1), *(p+2), *(p+3), *(p+4), \ + *(p+5), *(p+6), *(p+7)); +#define info(format, arg...) \ + printk(KERN_INFO "it913x-fe: " format "\n" , ## arg) + +struct it913x_fe_state { + struct dvb_frontend frontend; + struct i2c_adapter *i2c_adap; + struct ite_config *config; + u8 i2c_addr; + u32 frequency; + fe_modulation_t constellation; + fe_transmit_mode_t transmission_mode; + u8 priority; + u32 crystalFrequency; + u32 adcFrequency; + u8 tuner_type; + struct adctable *table; + fe_status_t it913x_status; + u16 tun_xtal; + u8 tun_fdiv; + u8 tun_clk_mode; + u32 tun_fn_min; + u32 ucblocks; +}; + +static int it913x_read_reg(struct it913x_fe_state *state, + u32 reg, u8 *data, u8 count) +{ + int ret; + u8 pro = PRO_DMOD; /* All reads from demodulator */ + u8 b[4]; + struct i2c_msg msg[2] = { + { .addr = state->i2c_addr + (pro << 1), .flags = 0, + .buf = b, .len = sizeof(b) }, + { .addr = state->i2c_addr + (pro << 1), .flags = I2C_M_RD, + .buf = data, .len = count } + }; + b[0] = (u8) reg >> 24; + b[1] = (u8)(reg >> 16) & 0xff; + b[2] = (u8)(reg >> 8) & 0xff; + b[3] = (u8) reg & 0xff; + + ret = i2c_transfer(state->i2c_adap, msg, 2); + + return ret; +} + +static int it913x_read_reg_u8(struct it913x_fe_state *state, u32 reg) +{ + int ret; + u8 b[1]; + ret = it913x_read_reg(state, reg, &b[0], sizeof(b)); + return (ret < 0) ? -ENODEV : b[0]; +} + +static int it913x_write(struct it913x_fe_state *state, + u8 pro, u32 reg, u8 buf[], u8 count) +{ + u8 b[256]; + struct i2c_msg msg[1] = { + { .addr = state->i2c_addr + (pro << 1), .flags = 0, + .buf = b, .len = count + 4 } + }; + int ret; + + b[0] = (u8) reg >> 24; + b[1] = (u8)(reg >> 16) & 0xff; + b[2] = (u8)(reg >> 8) & 0xff; + b[3] = (u8) reg & 0xff; + memcpy(&b[4], buf, count); + + ret = i2c_transfer(state->i2c_adap, msg, 1); + + if (ret < 0) + return -EIO; + + return 0; +} + +static int it913x_write_reg(struct it913x_fe_state *state, + u8 pro, u32 reg, u32 data) +{ + int ret; + u8 b[4]; + u8 s; + + b[0] = data >> 24; + b[1] = (data >> 16) & 0xff; + b[2] = (data >> 8) & 0xff; + b[3] = data & 0xff; + /* expand write as needed */ + if (data < 0x100) + s = 3; + else if (data < 0x1000) + s = 2; + else if (data < 0x100000) + s = 1; + else + s = 0; + + ret = it913x_write(state, pro, reg, &b[s], sizeof(b) - s); + + return ret; +} + +static int it913x_fe_script_loader(struct it913x_fe_state *state, + struct it913xset *loadscript) +{ + int ret, i; + if (loadscript == NULL) + return -EINVAL; + + for (i = 0; i < 1000; ++i) { + if (loadscript[i].pro == 0xff) + break; + ret = it913x_write(state, loadscript[i].pro, + loadscript[i].address, + loadscript[i].reg, loadscript[i].count); + if (ret < 0) + return -ENODEV; + } + return 0; +} + +static int it913x_init_tuner(struct it913x_fe_state *state) +{ + int ret, i, reg; + u8 val, nv_val; + u8 nv[] = {48, 32, 24, 16, 12, 8, 6, 4, 2}; + u8 b[2]; + + reg = it913x_read_reg_u8(state, 0xec86); + switch (reg) { + case 0: + state->tun_clk_mode = reg; + state->tun_xtal = 2000; + state->tun_fdiv = 3; + val = 16; + break; + case -ENODEV: + return -ENODEV; + case 1: + default: + state->tun_clk_mode = reg; + state->tun_xtal = 640; + state->tun_fdiv = 1; + val = 6; + break; + } + + reg = it913x_read_reg_u8(state, 0xed03); + + if (reg < 0) + return -ENODEV; + else if (reg < ARRAY_SIZE(nv)) + nv_val = nv[reg]; + else + nv_val = 2; + + for (i = 0; i < 50; i++) { + ret = it913x_read_reg(state, 0xed23, &b[0], sizeof(b)); + reg = (b[1] << 8) + b[0]; + if (reg > 0) + break; + if (ret < 0) + return -ENODEV; + udelay(2000); + } + state->tun_fn_min = state->tun_xtal * reg; + state->tun_fn_min /= (state->tun_fdiv * nv_val); + deb_info("Tuner fn_min %d", state->tun_fn_min); + + if (state->config->chip_ver > 1) + msleep(50); + else { + for (i = 0; i < 50; i++) { + reg = it913x_read_reg_u8(state, 0xec82); + if (reg > 0) + break; + if (reg < 0) + return -ENODEV; + udelay(2000); + } + } + + return it913x_write_reg(state, PRO_DMOD, 0xed81, val); +} + +static int it9137_set_tuner(struct it913x_fe_state *state, + u32 bandwidth, u32 frequency_m) +{ + struct it913xset *set_tuner = set_it9137_template; + int ret, reg; + u32 frequency = frequency_m / 1000; + u32 freq, temp_f, tmp; + u16 iqik_m_cal; + u16 n_div; + u8 n; + u8 l_band; + u8 lna_band; + u8 bw; + + if (state->config->firmware_ver == 1) + set_tuner = set_it9135_template; + else + set_tuner = set_it9137_template; + + deb_info("Tuner Frequency %d Bandwidth %d", frequency, bandwidth); + + if (frequency >= 51000 && frequency <= 440000) { + l_band = 0; + lna_band = 0; + } else if (frequency > 440000 && frequency <= 484000) { + l_band = 1; + lna_band = 1; + } else if (frequency > 484000 && frequency <= 533000) { + l_band = 1; + lna_band = 2; + } else if (frequency > 533000 && frequency <= 587000) { + l_band = 1; + lna_band = 3; + } else if (frequency > 587000 && frequency <= 645000) { + l_band = 1; + lna_band = 4; + } else if (frequency > 645000 && frequency <= 710000) { + l_band = 1; + lna_band = 5; + } else if (frequency > 710000 && frequency <= 782000) { + l_band = 1; + lna_band = 6; + } else if (frequency > 782000 && frequency <= 860000) { + l_band = 1; + lna_band = 7; + } else if (frequency > 1450000 && frequency <= 1492000) { + l_band = 1; + lna_band = 0; + } else if (frequency > 1660000 && frequency <= 1685000) { + l_band = 1; + lna_band = 1; + } else + return -EINVAL; + set_tuner[0].reg[0] = lna_band; + + switch (bandwidth) { + case 5000000: + bw = 0; + break; + case 6000000: + bw = 2; + break; + case 7000000: + bw = 4; + break; + default: + case 8000000: + bw = 6; + break; + } + + set_tuner[1].reg[0] = bw; + set_tuner[2].reg[0] = 0xa0 | (l_band << 3); + + if (frequency > 53000 && frequency <= 74000) { + n_div = 48; + n = 0; + } else if (frequency > 74000 && frequency <= 111000) { + n_div = 32; + n = 1; + } else if (frequency > 111000 && frequency <= 148000) { + n_div = 24; + n = 2; + } else if (frequency > 148000 && frequency <= 222000) { + n_div = 16; + n = 3; + } else if (frequency > 222000 && frequency <= 296000) { + n_div = 12; + n = 4; + } else if (frequency > 296000 && frequency <= 445000) { + n_div = 8; + n = 5; + } else if (frequency > 445000 && frequency <= state->tun_fn_min) { + n_div = 6; + n = 6; + } else if (frequency > state->tun_fn_min && frequency <= 950000) { + n_div = 4; + n = 7; + } else if (frequency > 1450000 && frequency <= 1680000) { + n_div = 2; + n = 0; + } else + return -EINVAL; + + reg = it913x_read_reg_u8(state, 0xed81); + iqik_m_cal = (u16)reg * n_div; + + if (reg < 0x20) { + if (state->tun_clk_mode == 0) + iqik_m_cal = (iqik_m_cal * 9) >> 5; + else + iqik_m_cal >>= 1; + } else { + iqik_m_cal = 0x40 - iqik_m_cal; + if (state->tun_clk_mode == 0) + iqik_m_cal = ~((iqik_m_cal * 9) >> 5); + else + iqik_m_cal = ~(iqik_m_cal >> 1); + } + + temp_f = frequency * (u32)n_div * (u32)state->tun_fdiv; + freq = temp_f / state->tun_xtal; + tmp = freq * state->tun_xtal; + + if ((temp_f - tmp) >= (state->tun_xtal >> 1)) + freq++; + + freq += (u32) n << 13; + /* Frequency OMEGA_IQIK_M_CAL_MID*/ + temp_f = freq + (u32)iqik_m_cal; + + set_tuner[3].reg[0] = temp_f & 0xff; + set_tuner[4].reg[0] = (temp_f >> 8) & 0xff; + + deb_info("High Frequency = %04x", temp_f); + + /* Lower frequency */ + set_tuner[5].reg[0] = freq & 0xff; + set_tuner[6].reg[0] = (freq >> 8) & 0xff; + + deb_info("low Frequency = %04x", freq); + + ret = it913x_fe_script_loader(state, set_tuner); + + return (ret < 0) ? -ENODEV : 0; +} + +static int it913x_fe_select_bw(struct it913x_fe_state *state, + u32 bandwidth, u32 adcFrequency) +{ + int ret, i; + u8 buffer[256]; + u32 coeff[8]; + u16 bfsfcw_fftinx_ratio; + u16 fftinx_bfsfcw_ratio; + u8 count; + u8 bw; + u8 adcmultiplier; + + deb_info("Bandwidth %d Adc %d", bandwidth, adcFrequency); + + switch (bandwidth) { + case 5000000: + bw = 3; + break; + case 6000000: + bw = 0; + break; + case 7000000: + bw = 1; + break; + default: + case 8000000: + bw = 2; + break; + } + ret = it913x_write_reg(state, PRO_DMOD, REG_BW, bw); + + if (state->table == NULL) + return -EINVAL; + + /* In write order */ + coeff[0] = state->table[bw].coeff_1_2048; + coeff[1] = state->table[bw].coeff_2_2k; + coeff[2] = state->table[bw].coeff_1_8191; + coeff[3] = state->table[bw].coeff_1_8192; + coeff[4] = state->table[bw].coeff_1_8193; + coeff[5] = state->table[bw].coeff_2_8k; + coeff[6] = state->table[bw].coeff_1_4096; + coeff[7] = state->table[bw].coeff_2_4k; + bfsfcw_fftinx_ratio = state->table[bw].bfsfcw_fftinx_ratio; + fftinx_bfsfcw_ratio = state->table[bw].fftinx_bfsfcw_ratio; + + /* ADC multiplier */ + ret = it913x_read_reg_u8(state, ADC_X_2); + if (ret < 0) + return -EINVAL; + + adcmultiplier = ret; + + count = 0; + + /* Build Buffer for COEFF Registers */ + for (i = 0; i < 8; i++) { + if (adcmultiplier == 1) + coeff[i] /= 2; + buffer[count++] = (coeff[i] >> 24) & 0x3; + buffer[count++] = (coeff[i] >> 16) & 0xff; + buffer[count++] = (coeff[i] >> 8) & 0xff; + buffer[count++] = coeff[i] & 0xff; + } + + /* bfsfcw_fftinx_ratio register 0x21-0x22 */ + buffer[count++] = bfsfcw_fftinx_ratio & 0xff; + buffer[count++] = (bfsfcw_fftinx_ratio >> 8) & 0xff; + /* fftinx_bfsfcw_ratio register 0x23-0x24 */ + buffer[count++] = fftinx_bfsfcw_ratio & 0xff; + buffer[count++] = (fftinx_bfsfcw_ratio >> 8) & 0xff; + /* start at COEFF_1_2048 and write through to fftinx_bfsfcw_ratio*/ + ret = it913x_write(state, PRO_DMOD, COEFF_1_2048, buffer, count); + + for (i = 0; i < 42; i += 8) + debug_data_snipet(0x1, "Buffer", &buffer[i]); + + return ret; +} + + + +static int it913x_fe_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct it913x_fe_state *state = fe->demodulator_priv; + int ret, i; + fe_status_t old_status = state->it913x_status; + *status = 0; + + if (state->it913x_status == 0) { + ret = it913x_read_reg_u8(state, EMPTY_CHANNEL_STATUS); + if (ret == 0x1) { + *status |= FE_HAS_SIGNAL; + for (i = 0; i < 40; i++) { + ret = it913x_read_reg_u8(state, MP2IF_SYNC_LK); + if (ret == 0x1) + break; + msleep(25); + } + if (ret == 0x1) + *status |= FE_HAS_CARRIER + | FE_HAS_VITERBI + | FE_HAS_SYNC; + state->it913x_status = *status; + } + } + + if (state->it913x_status & FE_HAS_SYNC) { + ret = it913x_read_reg_u8(state, TPSD_LOCK); + if (ret == 0x1) + *status |= FE_HAS_LOCK + | state->it913x_status; + else + state->it913x_status = 0; + if (old_status != state->it913x_status) + ret = it913x_write_reg(state, PRO_LINK, GPIOH3_O, ret); + } + + return 0; +} + +/* FEC values based on fe_code_rate_t non supported values 0*/ +int it913x_qpsk_pval[] = {0, -93, -91, -90, 0, -89, -88}; +int it913x_16qam_pval[] = {0, -87, -85, -84, 0, -83, -82}; +int it913x_64qam_pval[] = {0, -82, -80, -78, 0, -77, -76}; + +static int it913x_get_signal_strength(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct it913x_fe_state *state = fe->demodulator_priv; + u8 code_rate; + int ret, temp; + u8 lna_gain_os; + + ret = it913x_read_reg_u8(state, VAR_P_INBAND); + if (ret < 0) + return ret; + + /* VHF/UHF gain offset */ + if (state->frequency < 300000000) + lna_gain_os = 7; + else + lna_gain_os = 14; + + temp = (ret - 100) - lna_gain_os; + + if (state->priority == PRIORITY_HIGH) + code_rate = p->code_rate_HP; + else + code_rate = p->code_rate_LP; + + if (code_rate >= ARRAY_SIZE(it913x_qpsk_pval)) + return -EINVAL; + + deb_info("Reg VAR_P_INBAND:%d Calc Offset Value:%d", ret, temp); + + /* Apply FEC offset values*/ + switch (p->modulation) { + case QPSK: + temp -= it913x_qpsk_pval[code_rate]; + break; + case QAM_16: + temp -= it913x_16qam_pval[code_rate]; + break; + case QAM_64: + temp -= it913x_64qam_pval[code_rate]; + break; + default: + return -EINVAL; + } + + if (temp < -15) + ret = 0; + else if ((-15 <= temp) && (temp < 0)) + ret = (2 * (temp + 15)) / 3; + else if ((0 <= temp) && (temp < 20)) + ret = 4 * temp + 10; + else if ((20 <= temp) && (temp < 35)) + ret = (2 * (temp - 20)) / 3 + 90; + else if (temp >= 35) + ret = 100; + + deb_info("Signal Strength :%d", ret); + + return ret; +} + +static int it913x_fe_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + struct it913x_fe_state *state = fe->demodulator_priv; + int ret = 0; + if (state->config->read_slevel) { + if (state->it913x_status & FE_HAS_SIGNAL) + ret = it913x_read_reg_u8(state, SIGNAL_LEVEL); + } else + ret = it913x_get_signal_strength(fe); + + if (ret >= 0) + *strength = (u16)((u32)ret * 0xffff / 0x64); + + return (ret < 0) ? -ENODEV : 0; +} + +static int it913x_fe_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct it913x_fe_state *state = fe->demodulator_priv; + int ret; + u8 reg[3]; + u32 snr_val, snr_min, snr_max; + u32 temp; + + ret = it913x_read_reg(state, 0x2c, reg, sizeof(reg)); + + snr_val = (u32)(reg[2] << 16) | (reg[1] << 8) | reg[0]; + + ret |= it913x_read_reg(state, 0xf78b, reg, 1); + if (reg[0]) + snr_val /= reg[0]; + + if (state->transmission_mode == TRANSMISSION_MODE_2K) + snr_val *= 4; + else if (state->transmission_mode == TRANSMISSION_MODE_4K) + snr_val *= 2; + + if (state->constellation == QPSK) { + snr_min = 0xb4711; + snr_max = 0x191451; + } else if (state->constellation == QAM_16) { + snr_min = 0x4f0d5; + snr_max = 0xc7925; + } else if (state->constellation == QAM_64) { + snr_min = 0x256d0; + snr_max = 0x626be; + } else + return -EINVAL; + + if (snr_val < snr_min) + *snr = 0; + else if (snr_val < snr_max) { + temp = (snr_val - snr_min) >> 5; + temp *= 0xffff; + temp /= (snr_max - snr_min) >> 5; + *snr = (u16)temp; + } else + *snr = 0xffff; + + return (ret < 0) ? -ENODEV : 0; +} + +static int it913x_fe_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct it913x_fe_state *state = fe->demodulator_priv; + u8 reg[5]; + /* Read Aborted Packets and Pre-Viterbi error rate 5 bytes */ + it913x_read_reg(state, RSD_ABORT_PKT_LSB, reg, sizeof(reg)); + state->ucblocks += (u32)(reg[1] << 8) | reg[0]; + *ber = (u32)(reg[4] << 16) | (reg[3] << 8) | reg[2]; + return 0; +} + +static int it913x_fe_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct it913x_fe_state *state = fe->demodulator_priv; + int ret; + u8 reg[2]; + /* Aborted Packets */ + ret = it913x_read_reg(state, RSD_ABORT_PKT_LSB, reg, sizeof(reg)); + state->ucblocks += (u32)(reg[1] << 8) | reg[0]; + *ucblocks = state->ucblocks; + return ret; +} + +static int it913x_fe_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct it913x_fe_state *state = fe->demodulator_priv; + u8 reg[8]; + + it913x_read_reg(state, REG_TPSD_TX_MODE, reg, sizeof(reg)); + + if (reg[3] < 3) + p->modulation = fe_con[reg[3]]; + + if (reg[0] < 3) + p->transmission_mode = fe_mode[reg[0]]; + + if (reg[1] < 4) + p->guard_interval = fe_gi[reg[1]]; + + if (reg[2] < 4) + p->hierarchy = fe_hi[reg[2]]; + + state->priority = reg[5]; + + p->code_rate_HP = (reg[6] < 6) ? fe_code[reg[6]] : FEC_NONE; + p->code_rate_LP = (reg[7] < 6) ? fe_code[reg[7]] : FEC_NONE; + + /* Update internal state to reflect the autodetected props */ + state->constellation = p->modulation; + state->transmission_mode = p->transmission_mode; + + return 0; +} + +static int it913x_fe_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct it913x_fe_state *state = fe->demodulator_priv; + int i; + u8 empty_ch, last_ch; + + state->it913x_status = 0; + + /* Set bw*/ + it913x_fe_select_bw(state, p->bandwidth_hz, + state->adcFrequency); + + /* Training Mode Off */ + it913x_write_reg(state, PRO_LINK, TRAINING_MODE, 0x0); + + /* Clear Empty Channel */ + it913x_write_reg(state, PRO_DMOD, EMPTY_CHANNEL_STATUS, 0x0); + + /* Clear bits */ + it913x_write_reg(state, PRO_DMOD, MP2IF_SYNC_LK, 0x0); + /* LED on */ + it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x1); + /* Select Band*/ + if ((p->frequency >= 51000000) && (p->frequency <= 230000000)) + i = 0; + else if ((p->frequency >= 350000000) && (p->frequency <= 900000000)) + i = 1; + else if ((p->frequency >= 1450000000) && (p->frequency <= 1680000000)) + i = 2; + else + return -EOPNOTSUPP; + + it913x_write_reg(state, PRO_DMOD, FREE_BAND, i); + + deb_info("Frontend Set Tuner Type %02x", state->tuner_type); + switch (state->tuner_type) { + case IT9135_38: + case IT9135_51: + case IT9135_52: + case IT9135_60: + case IT9135_61: + case IT9135_62: + it9137_set_tuner(state, + p->bandwidth_hz, p->frequency); + break; + default: + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + break; + } + /* LED off */ + it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x0); + /* Trigger ofsm */ + it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x0); + last_ch = 2; + for (i = 0; i < 40; ++i) { + empty_ch = it913x_read_reg_u8(state, EMPTY_CHANNEL_STATUS); + if (last_ch == 1 && empty_ch == 1) + break; + if (last_ch == 2 && empty_ch == 2) + return 0; + last_ch = empty_ch; + msleep(25); + } + for (i = 0; i < 40; ++i) { + if (it913x_read_reg_u8(state, D_TPSD_LOCK) == 1) + break; + msleep(25); + } + + state->frequency = p->frequency; + return 0; +} + +static int it913x_fe_suspend(struct it913x_fe_state *state) +{ + int ret, i; + u8 b; + + ret = it913x_write_reg(state, PRO_DMOD, SUSPEND_FLAG, 0x1); + + ret |= it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x0); + + for (i = 0; i < 128; i++) { + ret = it913x_read_reg(state, SUSPEND_FLAG, &b, 1); + if (ret < 0) + return -ENODEV; + if (b == 0) + break; + + } + + ret |= it913x_write_reg(state, PRO_DMOD, AFE_MEM0, 0x8); + /* Turn LED off */ + ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x0); + + ret |= it913x_fe_script_loader(state, it9137_tuner_off); + + return (ret < 0) ? -ENODEV : 0; +} + +/* Power sequence */ +/* Power Up Tuner on -> Frontend suspend off -> Tuner clk on */ +/* Power Down Frontend suspend on -> Tuner clk off -> Tuner off */ + +static int it913x_fe_sleep(struct dvb_frontend *fe) +{ + struct it913x_fe_state *state = fe->demodulator_priv; + return it913x_fe_suspend(state); +} + +static u32 compute_div(u32 a, u32 b, u32 x) +{ + u32 res = 0; + u32 c = 0; + u32 i = 0; + + if (a > b) { + c = a / b; + a = a - c * b; + } + + for (i = 0; i < x; i++) { + if (a >= b) { + res += 1; + a -= b; + } + a <<= 1; + res <<= 1; + } + + res = (c << x) + res; + + return res; +} + +static int it913x_fe_start(struct it913x_fe_state *state) +{ + struct it913xset *set_lna; + struct it913xset *set_mode; + int ret; + u8 adf = (state->config->adf & 0xf); + u32 adc, xtal; + u8 b[4]; + + if (state->config->chip_ver == 1) + ret = it913x_init_tuner(state); + + info("ADF table value :%02x", adf); + + if (adf < 10) { + state->crystalFrequency = fe_clockTable[adf].xtal ; + state->table = fe_clockTable[adf].table; + state->adcFrequency = state->table->adcFrequency; + + adc = compute_div(state->adcFrequency, 1000000ul, 19ul); + xtal = compute_div(state->crystalFrequency, 1000000ul, 19ul); + + } else + return -EINVAL; + + /* Set LED indicator on GPIOH3 */ + ret = it913x_write_reg(state, PRO_LINK, GPIOH3_EN, 0x1); + ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_ON, 0x1); + ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x1); + + ret |= it913x_write_reg(state, PRO_LINK, 0xf641, state->tuner_type); + ret |= it913x_write_reg(state, PRO_DMOD, 0xf5ca, 0x01); + ret |= it913x_write_reg(state, PRO_DMOD, 0xf715, 0x01); + + b[0] = xtal & 0xff; + b[1] = (xtal >> 8) & 0xff; + b[2] = (xtal >> 16) & 0xff; + b[3] = (xtal >> 24); + ret |= it913x_write(state, PRO_DMOD, XTAL_CLK, b , 4); + + b[0] = adc & 0xff; + b[1] = (adc >> 8) & 0xff; + b[2] = (adc >> 16) & 0xff; + ret |= it913x_write(state, PRO_DMOD, ADC_FREQ, b, 3); + + if (state->config->adc_x2) + ret |= it913x_write_reg(state, PRO_DMOD, ADC_X_2, 0x01); + b[0] = 0; + b[1] = 0; + b[2] = 0; + ret |= it913x_write(state, PRO_DMOD, 0x0029, b, 3); + + info("Crystal Frequency :%d Adc Frequency :%d ADC X2: %02x", + state->crystalFrequency, state->adcFrequency, + state->config->adc_x2); + deb_info("Xtal value :%04x Adc value :%04x", xtal, adc); + + if (ret < 0) + return -ENODEV; + + /* v1 or v2 tuner script */ + if (state->config->chip_ver > 1) + ret = it913x_fe_script_loader(state, it9135_v2); + else + ret = it913x_fe_script_loader(state, it9135_v1); + if (ret < 0) + return ret; + + /* LNA Scripts */ + switch (state->tuner_type) { + case IT9135_51: + set_lna = it9135_51; + break; + case IT9135_52: + set_lna = it9135_52; + break; + case IT9135_60: + set_lna = it9135_60; + break; + case IT9135_61: + set_lna = it9135_61; + break; + case IT9135_62: + set_lna = it9135_62; + break; + case IT9135_38: + default: + set_lna = it9135_38; + } + info("Tuner LNA type :%02x", state->tuner_type); + + ret = it913x_fe_script_loader(state, set_lna); + if (ret < 0) + return ret; + + if (state->config->chip_ver == 2) { + ret = it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x1); + ret |= it913x_write_reg(state, PRO_LINK, PADODPU, 0x0); + ret |= it913x_write_reg(state, PRO_LINK, AGC_O_D, 0x0); + ret |= it913x_init_tuner(state); + } + if (ret < 0) + return -ENODEV; + + /* Always solo frontend */ + set_mode = set_solo_fe; + ret |= it913x_fe_script_loader(state, set_mode); + + ret |= it913x_fe_suspend(state); + return (ret < 0) ? -ENODEV : 0; +} + +static int it913x_fe_init(struct dvb_frontend *fe) +{ + struct it913x_fe_state *state = fe->demodulator_priv; + int ret = 0; + /* Power Up Tuner - common all versions */ + ret = it913x_write_reg(state, PRO_DMOD, 0xec40, 0x1); + + ret |= it913x_fe_script_loader(state, init_1); + + ret |= it913x_write_reg(state, PRO_DMOD, AFE_MEM0, 0x0); + + ret |= it913x_write_reg(state, PRO_DMOD, 0xfba8, 0x0); + + return (ret < 0) ? -ENODEV : 0; +} + +static void it913x_fe_release(struct dvb_frontend *fe) +{ + struct it913x_fe_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops it913x_fe_ofdm_ops; + +struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, struct ite_config *config) +{ + struct it913x_fe_state *state = NULL; + int ret; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct it913x_fe_state), GFP_KERNEL); + if (state == NULL) + return NULL; + if (config == NULL) + goto error; + + state->i2c_adap = i2c_adap; + state->i2c_addr = i2c_addr; + state->config = config; + + switch (state->config->tuner_id_0) { + case IT9135_51: + case IT9135_52: + case IT9135_60: + case IT9135_61: + case IT9135_62: + state->tuner_type = state->config->tuner_id_0; + break; + default: + case IT9135_38: + state->tuner_type = IT9135_38; + } + + ret = it913x_fe_start(state); + if (ret < 0) + goto error; + + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &it913x_fe_ofdm_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(it913x_fe_attach); + +static struct dvb_frontend_ops it913x_fe_ofdm_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "it913x-fe DVB-T", + .frequency_min = 51000000, + .frequency_max = 1680000000, + .frequency_stepsize = 62500, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = it913x_fe_release, + + .init = it913x_fe_init, + .sleep = it913x_fe_sleep, + + .set_frontend = it913x_fe_set_frontend, + .get_frontend = it913x_fe_get_frontend, + + .read_status = it913x_fe_read_status, + .read_signal_strength = it913x_fe_read_signal_strength, + .read_snr = it913x_fe_read_snr, + .read_ber = it913x_fe_read_ber, + .read_ucblocks = it913x_fe_read_ucblocks, +}; + +MODULE_DESCRIPTION("it913x Frontend and it9137 tuner"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); +MODULE_VERSION("1.15"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/it913x-fe.h b/drivers/media/dvb-frontends/it913x-fe.h new file mode 100644 index 00000000..df0ad420 --- /dev/null +++ b/drivers/media/dvb-frontends/it913x-fe.h @@ -0,0 +1,237 @@ +/* + * Driver for it913x Frontend + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef IT913X_FE_H +#define IT913X_FE_H + +#include +#include +#include "dvb_frontend.h" + +struct ite_config { + u8 chip_ver; + u16 chip_type; + u32 firmware; + u8 firmware_ver; + u8 adc_x2; + u8 tuner_id_0; + u8 tuner_id_1; + u8 dual_mode; + u8 adf; + /* option to read SIGNAL_LEVEL */ + u8 read_slevel; +}; + +#if IS_ENABLED(CONFIG_DVB_IT913X_FE) +extern struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, struct ite_config *config); +#else +static inline struct dvb_frontend *it913x_fe_attach( + struct i2c_adapter *i2c_adap, + u8 i2c_addr, struct ite_config *config) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_IT913X_FE */ +#define I2C_BASE_ADDR 0x10 +#define DEV_0 0x0 +#define DEV_1 0x10 +#define PRO_LINK 0x0 +#define PRO_DMOD 0x1 +#define DEV_0_DMOD (PRO_DMOD << 0x7) +#define DEV_1_DMOD (DEV_0_DMOD | DEV_1) +#define CHIP2_I2C_ADDR 0x3a + +#define AFE_MEM0 0xfb24 + +#define MP2_SW_RST 0xf99d +#define MP2IF2_SW_RST 0xf9a4 + +#define PADODPU 0xd827 +#define THIRDODPU 0xd828 +#define AGC_O_D 0xd829 + +#define EP0_TX_EN 0xdd11 +#define EP0_TX_NAK 0xdd13 +#define EP4_TX_LEN_LSB 0xdd88 +#define EP4_TX_LEN_MSB 0xdd89 +#define EP4_MAX_PKT 0xdd0c +#define EP5_TX_LEN_LSB 0xdd8a +#define EP5_TX_LEN_MSB 0xdd8b +#define EP5_MAX_PKT 0xdd0d + +#define IO_MUX_POWER_CLK 0xd800 +#define CLK_O_EN 0xd81a +#define I2C_CLK 0xf103 +#define I2C_CLK_100 0x7 +#define I2C_CLK_400 0x1a + +#define D_TPSD_LOCK 0xf5a9 +#define MP2IF2_EN 0xf9a3 +#define MP2IF_SERIAL 0xf985 +#define TSIS_ENABLE 0xf9cd +#define MP2IF2_HALF_PSB 0xf9a5 +#define MP2IF_STOP_EN 0xf9b5 +#define MPEG_FULL_SPEED 0xf990 +#define TOP_HOSTB_SER_MODE 0xd91c + +#define PID_RST 0xf992 +#define PID_EN 0xf993 +#define PID_INX_EN 0xf994 +#define PID_INX 0xf995 +#define PID_LSB 0xf996 +#define PID_MSB 0xf997 + +#define MP2IF_MPEG_PAR_MODE 0xf986 +#define DCA_UPPER_CHIP 0xf731 +#define DCA_LOWER_CHIP 0xf732 +#define DCA_PLATCH 0xf730 +#define DCA_FPGA_LATCH 0xf778 +#define DCA_STAND_ALONE 0xf73c +#define DCA_ENABLE 0xf776 + +#define DVBT_INTEN 0xf41f +#define DVBT_ENABLE 0xf41a +#define HOSTB_DCA_LOWER 0xd91f +#define HOSTB_MPEG_PAR_MODE 0xd91b +#define HOSTB_MPEG_SER_MODE 0xd91c +#define HOSTB_MPEG_SER_DO7 0xd91d +#define HOSTB_DCA_UPPER 0xd91e +#define PADMISCDR2 0xd830 +#define PADMISCDR4 0xd831 +#define PADMISCDR8 0xd832 +#define PADMISCDRSR 0xd833 +#define LOCK3_OUT 0xd8fd + +#define GPIOH1_O 0xd8af +#define GPIOH1_EN 0xd8b0 +#define GPIOH1_ON 0xd8b1 +#define GPIOH3_O 0xd8b3 +#define GPIOH3_EN 0xd8b4 +#define GPIOH3_ON 0xd8b5 +#define GPIOH5_O 0xd8bb +#define GPIOH5_EN 0xd8bc +#define GPIOH5_ON 0xd8bd + +#define AFE_MEM0 0xfb24 + +#define REG_TPSD_TX_MODE 0xf900 +#define REG_TPSD_GI 0xf901 +#define REG_TPSD_HIER 0xf902 +#define REG_TPSD_CONST 0xf903 +#define REG_BW 0xf904 +#define REG_PRIV 0xf905 +#define REG_TPSD_HP_CODE 0xf906 +#define REG_TPSD_LP_CODE 0xf907 + +#define MP2IF_SYNC_LK 0xf999 +#define ADC_FREQ 0xf1cd + +#define TRIGGER_OFSM 0x0000 +/* COEFF Registers start at 0x0001 to 0x0020 */ +#define COEFF_1_2048 0x0001 +#define XTAL_CLK 0x0025 +#define BFS_FCW 0x0029 + +/* Error Regs */ +#define RSD_ABORT_PKT_LSB 0x0032 +#define RSD_ABORT_PKT_MSB 0x0033 +#define RSD_BIT_ERR_0_7 0x0034 +#define RSD_BIT_ERR_8_15 0x0035 +#define RSD_BIT_ERR_23_16 0x0036 +#define RSD_BIT_COUNT_LSB 0x0037 +#define RSD_BIT_COUNT_MSB 0x0038 + +#define TPSD_LOCK 0x003c +#define TRAINING_MODE 0x0040 +#define ADC_X_2 0x0045 +#define TUNER_ID 0x0046 +#define EMPTY_CHANNEL_STATUS 0x0047 +#define SIGNAL_LEVEL 0x0048 +#define SIGNAL_QUALITY 0x0049 +#define EST_SIGNAL_LEVEL 0x004a +#define FREE_BAND 0x004b +#define SUSPEND_FLAG 0x004c +#define VAR_P_INBAND 0x00f7 + +/* Build in tuner types */ +#define IT9137 0x38 +#define IT9135_38 0x38 +#define IT9135_51 0x51 +#define IT9135_52 0x52 +#define IT9135_60 0x60 +#define IT9135_61 0x61 +#define IT9135_62 0x62 + +enum { + CMD_DEMOD_READ = 0, + CMD_DEMOD_WRITE, + CMD_TUNER_READ, + CMD_TUNER_WRITE, + CMD_REG_EEPROM_READ, + CMD_REG_EEPROM_WRITE, + CMD_DATA_READ, + CMD_VAR_READ = 8, + CMD_VAR_WRITE, + CMD_PLATFORM_GET, + CMD_PLATFORM_SET, + CMD_IP_CACHE, + CMD_IP_ADD, + CMD_IP_REMOVE, + CMD_PID_ADD, + CMD_PID_REMOVE, + CMD_SIPSI_GET, + CMD_SIPSI_MPE_RESET, + CMD_H_PID_ADD = 0x15, + CMD_H_PID_REMOVE, + CMD_ABORT, + CMD_IR_GET, + CMD_IR_SET, + CMD_FW_DOWNLOAD = 0x21, + CMD_QUERYINFO, + CMD_BOOT, + CMD_FW_DOWNLOAD_BEGIN, + CMD_FW_DOWNLOAD_END, + CMD_RUN_CODE, + CMD_SCATTER_READ = 0x28, + CMD_SCATTER_WRITE, + CMD_GENERIC_READ, + CMD_GENERIC_WRITE +}; + +enum { + READ_LONG, + WRITE_LONG, + READ_SHORT, + WRITE_SHORT, + READ_DATA, + WRITE_DATA, + WRITE_CMD, +}; + +enum { + IT9135_AUTO = 0, + IT9137_FW, + IT9135_V1_FW, + IT9135_V2_FW, +}; + +#endif /* IT913X_FE_H */ diff --git a/drivers/media/dvb-frontends/itd1000.c b/drivers/media/dvb-frontends/itd1000.c new file mode 100644 index 00000000..cadcae4c --- /dev/null +++ b/drivers/media/dvb-frontends/itd1000.c @@ -0,0 +1,410 @@ +/* + * Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite" + * + * Copyright (c) 2007-8 Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" + +#include "itd1000.h" +#include "itd1000_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define itd_dbg(args...) do { \ + if (debug) { \ + printk(KERN_DEBUG "ITD1000: " args);\ + } \ +} while (0) + +#define itd_warn(args...) do { \ + printk(KERN_WARNING "ITD1000: " args); \ +} while (0) + +#define itd_info(args...) do { \ + printk(KERN_INFO "ITD1000: " args); \ +} while (0) + +/* don't write more than one byte with flexcop behind */ +static int itd1000_write_regs(struct itd1000_state *state, u8 reg, u8 v[], u8 len) +{ + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg = { + .addr = state->cfg->i2c_address, .flags = 0, .buf = buf, .len = len+1 + }; + + if (1 + len > sizeof(buf)) { + printk(KERN_WARNING + "itd1000: i2c wr reg=%04x: len=%d is too big!\n", + reg, len); + return -EINVAL; + } + + buf[0] = reg; + memcpy(&buf[1], v, len); + + /* itd_dbg("wr %02x: %02x\n", reg, v[0]); */ + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + printk(KERN_WARNING "itd1000 I2C write failed\n"); + return -EREMOTEIO; + } + return 0; +} + +static int itd1000_read_reg(struct itd1000_state *state, u8 reg) +{ + u8 val; + struct i2c_msg msg[2] = { + { .addr = state->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = &val, .len = 1 }, + }; + + /* ugly flexcop workaround */ + itd1000_write_regs(state, (reg - 1) & 0xff, &state->shadow[(reg - 1) & 0xff], 1); + + if (i2c_transfer(state->i2c, msg, 2) != 2) { + itd_warn("itd1000 I2C read failed\n"); + return -EREMOTEIO; + } + return val; +} + +static inline int itd1000_write_reg(struct itd1000_state *state, u8 r, u8 v) +{ + int ret = itd1000_write_regs(state, r, &v, 1); + state->shadow[r] = v; + return ret; +} + + +static struct { + u32 symbol_rate; + u8 pgaext : 4; /* PLLFH */ + u8 bbgvmin : 4; /* BBGVMIN */ +} itd1000_lpf_pga[] = { + { 0, 0x8, 0x3 }, + { 5200000, 0x8, 0x3 }, + { 12200000, 0x4, 0x3 }, + { 15400000, 0x2, 0x3 }, + { 19800000, 0x2, 0x3 }, + { 21500000, 0x2, 0x3 }, + { 24500000, 0x2, 0x3 }, + { 28400000, 0x2, 0x3 }, + { 33400000, 0x2, 0x3 }, + { 34400000, 0x1, 0x4 }, + { 34400000, 0x1, 0x4 }, + { 38400000, 0x1, 0x4 }, + { 38400000, 0x1, 0x4 }, + { 40400000, 0x1, 0x4 }, + { 45400000, 0x1, 0x4 }, +}; + +static void itd1000_set_lpf_bw(struct itd1000_state *state, u32 symbol_rate) +{ + u8 i; + u8 con1 = itd1000_read_reg(state, CON1) & 0xfd; + u8 pllfh = itd1000_read_reg(state, PLLFH) & 0x0f; + u8 bbgvmin = itd1000_read_reg(state, BBGVMIN) & 0xf0; + u8 bw = itd1000_read_reg(state, BW) & 0xf0; + + itd_dbg("symbol_rate = %d\n", symbol_rate); + + /* not sure what is that ? - starting to download the table */ + itd1000_write_reg(state, CON1, con1 | (1 << 1)); + + for (i = 0; i < ARRAY_SIZE(itd1000_lpf_pga); i++) + if (symbol_rate < itd1000_lpf_pga[i].symbol_rate) { + itd_dbg("symrate: index: %d pgaext: %x, bbgvmin: %x\n", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin); + itd1000_write_reg(state, PLLFH, pllfh | (itd1000_lpf_pga[i].pgaext << 4)); + itd1000_write_reg(state, BBGVMIN, bbgvmin | (itd1000_lpf_pga[i].bbgvmin)); + itd1000_write_reg(state, BW, bw | (i & 0x0f)); + break; + } + + itd1000_write_reg(state, CON1, con1 | (0 << 1)); +} + +static struct { + u8 vcorg; + u32 fmax_rg; +} itd1000_vcorg[] = { + { 1, 920000 }, + { 2, 971000 }, + { 3, 1031000 }, + { 4, 1091000 }, + { 5, 1171000 }, + { 6, 1281000 }, + { 7, 1381000 }, + { 8, 500000 }, /* this is intentional. */ + { 9, 1451000 }, + { 10, 1531000 }, + { 11, 1631000 }, + { 12, 1741000 }, + { 13, 1891000 }, + { 14, 2071000 }, + { 15, 2250000 }, +}; + +static void itd1000_set_vco(struct itd1000_state *state, u32 freq_khz) +{ + u8 i; + u8 gvbb_i2c = itd1000_read_reg(state, GVBB_I2C) & 0xbf; + u8 vco_chp1_i2c = itd1000_read_reg(state, VCO_CHP1_I2C) & 0x0f; + u8 adcout; + + /* reserved bit again (reset ?) */ + itd1000_write_reg(state, GVBB_I2C, gvbb_i2c | (1 << 6)); + + for (i = 0; i < ARRAY_SIZE(itd1000_vcorg); i++) { + if (freq_khz < itd1000_vcorg[i].fmax_rg) { + itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | (itd1000_vcorg[i].vcorg << 4)); + msleep(1); + + adcout = itd1000_read_reg(state, PLLLOCK) & 0x0f; + + itd_dbg("VCO: %dkHz: %d -> ADCOUT: %d %02x\n", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c); + + if (adcout > 13) { + if (!(itd1000_vcorg[i].vcorg == 7 || itd1000_vcorg[i].vcorg == 15)) + itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | ((itd1000_vcorg[i].vcorg + 1) << 4)); + } else if (adcout < 2) { + if (!(itd1000_vcorg[i].vcorg == 1 || itd1000_vcorg[i].vcorg == 9)) + itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | ((itd1000_vcorg[i].vcorg - 1) << 4)); + } + break; + } + } +} + +static const struct { + u32 freq; + u8 values[10]; /* RFTR, RFST1 - RFST9 */ +} itd1000_fre_values[] = { + { 1075000, { 0x59, 0x1d, 0x1c, 0x17, 0x16, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1250000, { 0x89, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1450000, { 0x89, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1650000, { 0x69, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1750000, { 0x69, 0x1e, 0x17, 0x15, 0x14, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1850000, { 0x69, 0x1d, 0x17, 0x16, 0x14, 0x0f, 0x0e, 0x0d, 0x0b, 0x0a } }, + { 1900000, { 0x69, 0x1d, 0x17, 0x15, 0x14, 0x0f, 0x0e, 0x0d, 0x0b, 0x0a } }, + { 1950000, { 0x69, 0x1d, 0x17, 0x16, 0x14, 0x13, 0x0e, 0x0d, 0x0b, 0x0a } }, + { 2050000, { 0x69, 0x1e, 0x1d, 0x17, 0x16, 0x14, 0x13, 0x0e, 0x0b, 0x0a } }, + { 2150000, { 0x69, 0x1d, 0x1c, 0x17, 0x15, 0x14, 0x13, 0x0f, 0x0e, 0x0b } } +}; + + +#define FREF 16 + +static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz) +{ + int i, j; + u32 plln, pllf; + u64 tmp; + + plln = (freq_khz * 1000) / 2 / FREF; + + /* Compute the factional part times 1000 */ + tmp = plln % 1000000; + plln /= 1000000; + + tmp *= 1048576; + do_div(tmp, 1000000); + pllf = (u32) tmp; + + state->frequency = ((plln * 1000) + (pllf * 1000)/1048576) * 2*FREF; + itd_dbg("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d\n", freq_khz, state->frequency, pllf, plln); + + itd1000_write_reg(state, PLLNH, 0x80); /* PLLNH */ + itd1000_write_reg(state, PLLNL, plln & 0xff); + itd1000_write_reg(state, PLLFH, (itd1000_read_reg(state, PLLFH) & 0xf0) | ((pllf >> 16) & 0x0f)); + itd1000_write_reg(state, PLLFM, (pllf >> 8) & 0xff); + itd1000_write_reg(state, PLLFL, (pllf >> 0) & 0xff); + + for (i = 0; i < ARRAY_SIZE(itd1000_fre_values); i++) { + if (freq_khz <= itd1000_fre_values[i].freq) { + itd_dbg("fre_values: %d\n", i); + itd1000_write_reg(state, RFTR, itd1000_fre_values[i].values[0]); + for (j = 0; j < 9; j++) + itd1000_write_reg(state, RFST1+j, itd1000_fre_values[i].values[j+1]); + break; + } + } + + itd1000_set_vco(state, freq_khz); +} + +static int itd1000_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct itd1000_state *state = fe->tuner_priv; + u8 pllcon1; + + itd1000_set_lo(state, c->frequency); + itd1000_set_lpf_bw(state, c->symbol_rate); + + pllcon1 = itd1000_read_reg(state, PLLCON1) & 0x7f; + itd1000_write_reg(state, PLLCON1, pllcon1 | (1 << 7)); + itd1000_write_reg(state, PLLCON1, pllcon1); + + return 0; +} + +static int itd1000_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct itd1000_state *state = fe->tuner_priv; + *frequency = state->frequency; + return 0; +} + +static int itd1000_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + return 0; +} + +static u8 itd1000_init_tab[][2] = { + { PLLCON1, 0x65 }, /* Register does not change */ + { PLLNH, 0x80 }, /* Bits [7:6] do not change */ + { RESERVED_0X6D, 0x3b }, + { VCO_CHP2_I2C, 0x12 }, + { 0x72, 0xf9 }, /* No such regsister defined */ + { RESERVED_0X73, 0xff }, + { RESERVED_0X74, 0xb2 }, + { RESERVED_0X75, 0xc7 }, + { EXTGVBBRF, 0xf0 }, + { DIVAGCCK, 0x80 }, + { BBTR, 0xa0 }, + { RESERVED_0X7E, 0x4f }, + { 0x82, 0x88 }, /* No such regsister defined */ + { 0x83, 0x80 }, /* No such regsister defined */ + { 0x84, 0x80 }, /* No such regsister defined */ + { RESERVED_0X85, 0x74 }, + { RESERVED_0X86, 0xff }, + { RESERVED_0X88, 0x02 }, + { RESERVED_0X89, 0x16 }, + { RFST0, 0x1f }, + { RESERVED_0X94, 0x66 }, + { RESERVED_0X95, 0x66 }, + { RESERVED_0X96, 0x77 }, + { RESERVED_0X97, 0x99 }, + { RESERVED_0X98, 0xff }, + { RESERVED_0X99, 0xfc }, + { RESERVED_0X9A, 0xba }, + { RESERVED_0X9B, 0xaa }, +}; + +static u8 itd1000_reinit_tab[][2] = { + { VCO_CHP1_I2C, 0x8a }, + { BW, 0x87 }, + { GVBB_I2C, 0x03 }, + { BBGVMIN, 0x03 }, + { CON1, 0x2e }, +}; + + +static int itd1000_init(struct dvb_frontend *fe) +{ + struct itd1000_state *state = fe->tuner_priv; + int i; + + for (i = 0; i < ARRAY_SIZE(itd1000_init_tab); i++) + itd1000_write_reg(state, itd1000_init_tab[i][0], itd1000_init_tab[i][1]); + + for (i = 0; i < ARRAY_SIZE(itd1000_reinit_tab); i++) + itd1000_write_reg(state, itd1000_reinit_tab[i][0], itd1000_reinit_tab[i][1]); + + return 0; +} + +static int itd1000_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int itd1000_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static const struct dvb_tuner_ops itd1000_tuner_ops = { + .info = { + .name = "Integrant ITD1000", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_step = 125, /* kHz for QPSK frontends */ + }, + + .release = itd1000_release, + + .init = itd1000_init, + .sleep = itd1000_sleep, + + .set_params = itd1000_set_parameters, + .get_frequency = itd1000_get_frequency, + .get_bandwidth = itd1000_get_bandwidth +}; + + +struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg) +{ + struct itd1000_state *state = NULL; + u8 i = 0; + + state = kzalloc(sizeof(struct itd1000_state), GFP_KERNEL); + if (state == NULL) + return NULL; + + state->cfg = cfg; + state->i2c = i2c; + + i = itd1000_read_reg(state, 0); + if (i != 0) { + kfree(state); + return NULL; + } + itd_info("successfully identified (ID: %d)\n", i); + + memset(state->shadow, 0xff, sizeof(state->shadow)); + for (i = 0x65; i < 0x9c; i++) + state->shadow[i] = itd1000_read_reg(state, i); + + memcpy(&fe->ops.tuner_ops, &itd1000_tuner_ops, sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = state; + + return fe; +} +EXPORT_SYMBOL(itd1000_attach); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Integrant ITD1000 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/itd1000.h b/drivers/media/dvb-frontends/itd1000.h new file mode 100644 index 00000000..edae0902 --- /dev/null +++ b/drivers/media/dvb-frontends/itd1000.h @@ -0,0 +1,42 @@ +/* + * Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite" + * + * Copyright (c) 2007 Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef ITD1000_H +#define ITD1000_H + +struct dvb_frontend; +struct i2c_adapter; + +struct itd1000_config { + u8 i2c_address; +}; + +#if IS_ENABLED(CONFIG_DVB_TUNER_ITD1000) +extern struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg); +#else +static inline struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/itd1000_priv.h b/drivers/media/dvb-frontends/itd1000_priv.h new file mode 100644 index 00000000..08ca8512 --- /dev/null +++ b/drivers/media/dvb-frontends/itd1000_priv.h @@ -0,0 +1,88 @@ +/* + * Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite" + * + * Copyright (c) 2007 Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef ITD1000_PRIV_H +#define ITD1000_PRIV_H + +struct itd1000_state { + struct itd1000_config *cfg; + struct i2c_adapter *i2c; + + u32 frequency; /* contains the value resulting from the LO-setting */ + + /* ugly workaround for flexcop's incapable i2c-controller + * FIXME, if possible + */ + u8 shadow[256]; +}; + +enum itd1000_register { + VCO_CHP1 = 0x65, + VCO_CHP2, + PLLCON1, + PLLNH, + PLLNL, + PLLFH, + PLLFM, + PLLFL, + RESERVED_0X6D, + PLLLOCK, + VCO_CHP2_I2C, + VCO_CHP1_I2C, + BW, + RESERVED_0X73 = 0x73, + RESERVED_0X74, + RESERVED_0X75, + GVBB, + GVRF, + GVBB_I2C, + EXTGVBBRF, + DIVAGCCK, + BBTR, + RFTR, + BBGVMIN, + RESERVED_0X7E, + RESERVED_0X85 = 0x85, + RESERVED_0X86, + CON1, + RESERVED_0X88, + RESERVED_0X89, + RFST0, + RFST1, + RFST2, + RFST3, + RFST4, + RFST5, + RFST6, + RFST7, + RFST8, + RFST9, + RESERVED_0X94, + RESERVED_0X95, + RESERVED_0X96, + RESERVED_0X97, + RESERVED_0X98, + RESERVED_0X99, + RESERVED_0X9A, + RESERVED_0X9B, +}; + +#endif diff --git a/drivers/media/dvb-frontends/ix2505v.c b/drivers/media/dvb-frontends/ix2505v.c new file mode 100644 index 00000000..0e3387e0 --- /dev/null +++ b/drivers/media/dvb-frontends/ix2505v.c @@ -0,0 +1,325 @@ +/** + * Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner + * + * Copyright (C) 2010 Malcolm Priestley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License Version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include + +#include "ix2505v.h" + +static int ix2505v_debug; +#define dprintk(level, args...) do { \ + if (ix2505v_debug & level) \ + printk(KERN_DEBUG "ix2505v: " args); \ +} while (0) + +#define deb_info(args...) dprintk(0x01, args) +#define deb_i2c(args...) dprintk(0x02, args) + +struct ix2505v_state { + struct i2c_adapter *i2c; + const struct ix2505v_config *config; + u32 frequency; +}; + +/** + * Data read format of the Sharp IX2505V B0017 + * + * byte1: 1 | 1 | 0 | 0 | 0 | MA1 | MA0 | 1 + * byte2: POR | FL | RD2 | RD1 | RD0 | X | X | X + * + * byte1 = address + * byte2; + * POR = Power on Reset (VCC H=<2.2v L=>2.2v) + * FL = Phase Lock (H=lock L=unlock) + * RD0-2 = Reserved internal operations + * + * Only POR can be used to check the tuner is present + * + * Caution: after byte2 the I2C reverts to write mode continuing to read + * may corrupt tuning data. + * + */ + +static int ix2505v_read_status_reg(struct ix2505v_state *state) +{ + u8 addr = state->config->tuner_address; + u8 b2[] = {0}; + int ret; + + struct i2c_msg msg[1] = { + { .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 } + }; + + ret = i2c_transfer(state->i2c, msg, 1); + deb_i2c("Read %s ", __func__); + + return (ret == 1) ? (int) b2[0] : -1; +} + +static int ix2505v_write(struct ix2505v_state *state, u8 buf[], u8 count) +{ + struct i2c_msg msg[1] = { + { .addr = state->config->tuner_address, .flags = 0, + .buf = buf, .len = count }, + }; + + int ret; + + ret = i2c_transfer(state->i2c, msg, 1); + + if (ret != 1) { + deb_i2c("%s: i2c error, ret=%d\n", __func__, ret); + return -EIO; + } + + return 0; +} + +static int ix2505v_release(struct dvb_frontend *fe) +{ + struct ix2505v_state *state = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(state); + + return 0; +} + +/** + * Data write format of the Sharp IX2505V B0017 + * + * byte1: 1 | 1 | 0 | 0 | 0 | 0(MA1)| 0(MA0)| 0 + * byte2: 0 | BG1 | BG2 | N8 | N7 | N6 | N5 | N4 + * byte3: N3 | N2 | N1 | A5 | A4 | A3 | A2 | A1 + * byte4: 1 | 1(C1) | 1(C0) | PD5 | PD4 | TM | 0(RTS)| 1(REF) + * byte5: BA2 | BA1 | BA0 | PSC | PD3 |PD2/TS2|DIV/TS1|PD0/TS0 + * + * byte1 = address + * + * Write order + * 1) byte1 -> byte2 -> byte3 -> byte4 -> byte5 + * 2) byte1 -> byte4 -> byte5 -> byte2 -> byte3 + * 3) byte1 -> byte2 -> byte3 -> byte4 + * 4) byte1 -> byte4 -> byte5 -> byte2 + * 5) byte1 -> byte2 -> byte3 + * 6) byte1 -> byte4 -> byte5 + * 7) byte1 -> byte2 + * 8) byte1 -> byte4 + * + * Recommended Setup + * 1 -> 8 -> 6 + */ + +static int ix2505v_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct ix2505v_state *state = fe->tuner_priv; + u32 frequency = c->frequency; + u32 b_w = (c->symbol_rate * 27) / 32000; + u32 div_factor, N , A, x; + int ret = 0, len; + u8 gain, cc, ref, psc, local_osc, lpf; + u8 data[4] = {0}; + + if ((frequency < fe->ops.info.frequency_min) + || (frequency > fe->ops.info.frequency_max)) + return -EINVAL; + + if (state->config->tuner_gain) + gain = (state->config->tuner_gain < 4) + ? state->config->tuner_gain : 0; + else + gain = 0x0; + + if (state->config->tuner_chargepump) + cc = state->config->tuner_chargepump; + else + cc = 0x3; + + ref = 8; /* REF =1 */ + psc = 32; /* PSC = 0 */ + + div_factor = (frequency * ref) / 40; /* local osc = 4Mhz */ + x = div_factor / psc; + N = x/100; + A = ((x - (N * 100)) * psc) / 100; + + data[0] = ((gain & 0x3) << 5) | (N >> 3); + data[1] = (N << 5) | (A & 0x1f); + data[2] = 0x81 | ((cc & 0x3) << 5) ; /*PD5,PD4 & TM = 0|C1,C0|REF=1*/ + + deb_info("Frq=%d x=%d N=%d A=%d\n", frequency, x, N, A); + + if (frequency <= 1065000) + local_osc = (6 << 5) | 2; + else if (frequency <= 1170000) + local_osc = (7 << 5) | 2; + else if (frequency <= 1300000) + local_osc = (1 << 5); + else if (frequency <= 1445000) + local_osc = (2 << 5); + else if (frequency <= 1607000) + local_osc = (3 << 5); + else if (frequency <= 1778000) + local_osc = (4 << 5); + else if (frequency <= 1942000) + local_osc = (5 << 5); + else /*frequency up to 2150000*/ + local_osc = (6 << 5); + + data[3] = local_osc; /* all other bits set 0 */ + + if (b_w <= 10000) + lpf = 0xc; + else if (b_w <= 12000) + lpf = 0x2; + else if (b_w <= 14000) + lpf = 0xa; + else if (b_w <= 16000) + lpf = 0x6; + else if (b_w <= 18000) + lpf = 0xe; + else if (b_w <= 20000) + lpf = 0x1; + else if (b_w <= 22000) + lpf = 0x9; + else if (b_w <= 24000) + lpf = 0x5; + else if (b_w <= 26000) + lpf = 0xd; + else if (b_w <= 28000) + lpf = 0x3; + else + lpf = 0xb; + + deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf); + deb_info("Data 0=[%4phN]\n", data); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + len = sizeof(data); + ret |= ix2505v_write(state, data, len); + + data[2] |= 0x4; /* set TM = 1 other bits same */ + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + len = 1; + ret |= ix2505v_write(state, &data[2], len); /* write byte 4 only */ + + msleep(10); + + data[2] |= ((lpf >> 2) & 0x3) << 3; /* lpf */ + data[3] |= (lpf & 0x3) << 2; + + deb_info("Data 2=[%x%x]\n", data[2], data[3]); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + len = 2; + ret |= ix2505v_write(state, &data[2], len); /* write byte 4 & 5 */ + + if (state->config->min_delay_ms) + msleep(state->config->min_delay_ms); + + state->frequency = frequency; + + return ret; +} + +static int ix2505v_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct ix2505v_state *state = fe->tuner_priv; + + *frequency = state->frequency; + + return 0; +} + +static struct dvb_tuner_ops ix2505v_tuner_ops = { + .info = { + .name = "Sharp IX2505V (B0017)", + .frequency_min = 950000, + .frequency_max = 2175000 + }, + .release = ix2505v_release, + .set_params = ix2505v_set_params, + .get_frequency = ix2505v_get_frequency, +}; + +struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe, + const struct ix2505v_config *config, + struct i2c_adapter *i2c) +{ + struct ix2505v_state *state = NULL; + int ret; + + if (NULL == config) { + deb_i2c("%s: no config ", __func__); + goto error; + } + + state = kzalloc(sizeof(struct ix2505v_state), GFP_KERNEL); + if (NULL == state) + return NULL; + + state->config = config; + state->i2c = i2c; + + if (state->config->tuner_write_only) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = ix2505v_read_status_reg(state); + + if (ret & 0x80) { + deb_i2c("%s: No IX2505V found\n", __func__); + goto error; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + fe->tuner_priv = state; + + memcpy(&fe->ops.tuner_ops, &ix2505v_tuner_ops, + sizeof(struct dvb_tuner_ops)); + deb_i2c("%s: initialization (%s addr=0x%02x) ok\n", + __func__, fe->ops.tuner_ops.info.name, config->tuner_address); + + return fe; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(ix2505v_attach); + +module_param_named(debug, ix2505v_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); +MODULE_DESCRIPTION("DVB IX2505V tuner driver"); +MODULE_AUTHOR("Malcolm Priestley"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/ix2505v.h b/drivers/media/dvb-frontends/ix2505v.h new file mode 100644 index 00000000..1a735a75 --- /dev/null +++ b/drivers/media/dvb-frontends/ix2505v.h @@ -0,0 +1,64 @@ +/** + * Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner + * + * Copyright (C) 2010 Malcolm Priestley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License Version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef DVB_IX2505V_H +#define DVB_IX2505V_H + +#include +#include +#include "dvb_frontend.h" + +/** + * Attach a ix2505v tuner to the supplied frontend structure. + * + * @param fe Frontend to attach to. + * @param config ix2505v_config structure + * @return FE pointer on success, NULL on failure. + */ + +struct ix2505v_config { + u8 tuner_address; + + /*Baseband AMP gain control 0/1=0dB(default) 2=-2bB 3=-4dB */ + u8 tuner_gain; + + /*Charge pump output +/- 0=120 1=260 2=555 3=1200(default) */ + u8 tuner_chargepump; + + /* delay after tune */ + int min_delay_ms; + + /* disables reads*/ + u8 tuner_write_only; + +}; + +#if IS_ENABLED(CONFIG_DVB_IX2505V) +extern struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe, + const struct ix2505v_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe, + const struct ix2505v_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* DVB_IX2505V_H */ diff --git a/drivers/media/dvb-frontends/l64781.c b/drivers/media/dvb-frontends/l64781.c new file mode 100644 index 00000000..ddf866c4 --- /dev/null +++ b/drivers/media/dvb-frontends/l64781.c @@ -0,0 +1,609 @@ +/* + driver for LSI L64781 COFDM demodulator + + Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH + Marko Kohtala + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "l64781.h" + + +struct l64781_state { + struct i2c_adapter* i2c; + const struct l64781_config* config; + struct dvb_frontend frontend; + + /* private demodulator data */ + unsigned int first:1; +}; + +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "l64781: " args); \ + } while (0) + +static int debug; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + + +static int l64781_writereg (struct l64781_state* state, u8 reg, u8 data) +{ + int ret; + u8 buf [] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + + if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) + dprintk ("%s: write_reg error (reg == %02x) = %02x!\n", + __func__, reg, ret); + + return (ret != 1) ? -1 : 0; +} + +static int l64781_readreg (struct l64781_state* state, u8 reg) +{ + int ret; + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) return ret; + + return b1[0]; +} + +static void apply_tps (struct l64781_state* state) +{ + l64781_writereg (state, 0x2a, 0x00); + l64781_writereg (state, 0x2a, 0x01); + + /* This here is a little bit questionable because it enables + the automatic update of TPS registers. I think we'd need to + handle the IRQ from FE to update some other registers as + well, or at least implement some magic to tuning to correct + to the TPS received from transmission. */ + l64781_writereg (state, 0x2a, 0x02); +} + + +static void reset_afc (struct l64781_state* state) +{ + /* Set AFC stall for the AFC_INIT_FRQ setting, TIM_STALL for + timing offset */ + l64781_writereg (state, 0x07, 0x9e); /* stall AFC */ + l64781_writereg (state, 0x08, 0); /* AFC INIT FREQ */ + l64781_writereg (state, 0x09, 0); + l64781_writereg (state, 0x0a, 0); + l64781_writereg (state, 0x07, 0x8e); + l64781_writereg (state, 0x0e, 0); /* AGC gain to zero in beginning */ + l64781_writereg (state, 0x11, 0x80); /* stall TIM */ + l64781_writereg (state, 0x10, 0); /* TIM_OFFSET_LSB */ + l64781_writereg (state, 0x12, 0); + l64781_writereg (state, 0x13, 0); + l64781_writereg (state, 0x11, 0x00); +} + +static int reset_and_configure (struct l64781_state* state) +{ + u8 buf [] = { 0x06 }; + struct i2c_msg msg = { .addr = 0x00, .flags = 0, .buf = buf, .len = 1 }; + // NOTE: this is correct in writing to address 0x00 + + return (i2c_transfer(state->i2c, &msg, 1) == 1) ? 0 : -ENODEV; +} + +static int apply_frontend_param(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct l64781_state* state = fe->demodulator_priv; + /* The coderates for FEC_NONE, FEC_4_5 and FEC_FEC_6_7 are arbitrary */ + static const u8 fec_tab[] = { 7, 0, 1, 2, 9, 3, 10, 4 }; + /* QPSK, QAM_16, QAM_64 */ + static const u8 qam_tab [] = { 2, 4, 0, 6 }; + static const u8 guard_tab [] = { 1, 2, 4, 8 }; + /* The Grundig 29504-401.04 Tuner comes with 18.432MHz crystal. */ + static const u32 ppm = 8000; + u32 ddfs_offset_fixed; +/* u32 ddfs_offset_variable = 0x6000-((1000000UL+ppm)/ */ +/* bw_tab[p->bandWidth]<<10)/15625; */ + u32 init_freq; + u32 spi_bias; + u8 val0x04; + u8 val0x05; + u8 val0x06; + int bw; + + switch (p->bandwidth_hz) { + case 8000000: + bw = 8; + break; + case 7000000: + bw = 7; + break; + case 6000000: + bw = 6; + break; + default: + return -EINVAL; + } + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + if (p->inversion != INVERSION_ON && + p->inversion != INVERSION_OFF) + return -EINVAL; + + if (p->code_rate_HP != FEC_1_2 && p->code_rate_HP != FEC_2_3 && + p->code_rate_HP != FEC_3_4 && p->code_rate_HP != FEC_5_6 && + p->code_rate_HP != FEC_7_8) + return -EINVAL; + + if (p->hierarchy != HIERARCHY_NONE && + (p->code_rate_LP != FEC_1_2 && p->code_rate_LP != FEC_2_3 && + p->code_rate_LP != FEC_3_4 && p->code_rate_LP != FEC_5_6 && + p->code_rate_LP != FEC_7_8)) + return -EINVAL; + + if (p->modulation != QPSK && p->modulation != QAM_16 && + p->modulation != QAM_64) + return -EINVAL; + + if (p->transmission_mode != TRANSMISSION_MODE_2K && + p->transmission_mode != TRANSMISSION_MODE_8K) + return -EINVAL; + + if ((int)p->guard_interval < GUARD_INTERVAL_1_32 || + p->guard_interval > GUARD_INTERVAL_1_4) + return -EINVAL; + + if ((int)p->hierarchy < HIERARCHY_NONE || + p->hierarchy > HIERARCHY_4) + return -EINVAL; + + ddfs_offset_fixed = 0x4000-(ppm<<16)/bw/1000000; + + /* This works up to 20000 ppm, it overflows if too large ppm! */ + init_freq = (((8UL<<25) + (8UL<<19) / 25*ppm / (15625/25)) / + bw & 0xFFFFFF); + + /* SPI bias calculation is slightly modified to fit in 32bit */ + /* will work for high ppm only... */ + spi_bias = 378 * (1 << 10); + spi_bias *= 16; + spi_bias *= bw; + spi_bias *= qam_tab[p->modulation]; + spi_bias /= p->code_rate_HP + 1; + spi_bias /= (guard_tab[p->guard_interval] + 32); + spi_bias *= 1000; + spi_bias /= 1000 + ppm/1000; + spi_bias *= p->code_rate_HP; + + val0x04 = (p->transmission_mode << 2) | p->guard_interval; + val0x05 = fec_tab[p->code_rate_HP]; + + if (p->hierarchy != HIERARCHY_NONE) + val0x05 |= (p->code_rate_LP - FEC_1_2) << 3; + + val0x06 = (p->hierarchy << 2) | p->modulation; + + l64781_writereg (state, 0x04, val0x04); + l64781_writereg (state, 0x05, val0x05); + l64781_writereg (state, 0x06, val0x06); + + reset_afc (state); + + /* Technical manual section 2.6.1, TIM_IIR_GAIN optimal values */ + l64781_writereg (state, 0x15, + p->transmission_mode == TRANSMISSION_MODE_2K ? 1 : 3); + l64781_writereg (state, 0x16, init_freq & 0xff); + l64781_writereg (state, 0x17, (init_freq >> 8) & 0xff); + l64781_writereg (state, 0x18, (init_freq >> 16) & 0xff); + + l64781_writereg (state, 0x1b, spi_bias & 0xff); + l64781_writereg (state, 0x1c, (spi_bias >> 8) & 0xff); + l64781_writereg (state, 0x1d, ((spi_bias >> 16) & 0x7f) | + (p->inversion == INVERSION_ON ? 0x80 : 0x00)); + + l64781_writereg (state, 0x22, ddfs_offset_fixed & 0xff); + l64781_writereg (state, 0x23, (ddfs_offset_fixed >> 8) & 0x3f); + + l64781_readreg (state, 0x00); /* clear interrupt registers... */ + l64781_readreg (state, 0x01); /* dto. */ + + apply_tps (state); + + return 0; +} + +static int get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct l64781_state* state = fe->demodulator_priv; + int tmp; + + + tmp = l64781_readreg(state, 0x04); + switch(tmp & 3) { + case 0: + p->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->guard_interval = GUARD_INTERVAL_1_4; + break; + } + switch((tmp >> 2) & 3) { + case 0: + p->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->transmission_mode = TRANSMISSION_MODE_8K; + break; + default: + printk(KERN_WARNING "Unexpected value for transmission_mode\n"); + } + + tmp = l64781_readreg(state, 0x05); + switch(tmp & 7) { + case 0: + p->code_rate_HP = FEC_1_2; + break; + case 1: + p->code_rate_HP = FEC_2_3; + break; + case 2: + p->code_rate_HP = FEC_3_4; + break; + case 3: + p->code_rate_HP = FEC_5_6; + break; + case 4: + p->code_rate_HP = FEC_7_8; + break; + default: + printk("Unexpected value for code_rate_HP\n"); + } + switch((tmp >> 3) & 7) { + case 0: + p->code_rate_LP = FEC_1_2; + break; + case 1: + p->code_rate_LP = FEC_2_3; + break; + case 2: + p->code_rate_LP = FEC_3_4; + break; + case 3: + p->code_rate_LP = FEC_5_6; + break; + case 4: + p->code_rate_LP = FEC_7_8; + break; + default: + printk("Unexpected value for code_rate_LP\n"); + } + + tmp = l64781_readreg(state, 0x06); + switch(tmp & 3) { + case 0: + p->modulation = QPSK; + break; + case 1: + p->modulation = QAM_16; + break; + case 2: + p->modulation = QAM_64; + break; + default: + printk(KERN_WARNING "Unexpected value for modulation\n"); + } + switch((tmp >> 2) & 7) { + case 0: + p->hierarchy = HIERARCHY_NONE; + break; + case 1: + p->hierarchy = HIERARCHY_1; + break; + case 2: + p->hierarchy = HIERARCHY_2; + break; + case 3: + p->hierarchy = HIERARCHY_4; + break; + default: + printk("Unexpected value for hierarchy\n"); + } + + + tmp = l64781_readreg (state, 0x1d); + p->inversion = (tmp & 0x80) ? INVERSION_ON : INVERSION_OFF; + + tmp = (int) (l64781_readreg (state, 0x08) | + (l64781_readreg (state, 0x09) << 8) | + (l64781_readreg (state, 0x0a) << 16)); + p->frequency += tmp; + + return 0; +} + +static int l64781_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct l64781_state* state = fe->demodulator_priv; + int sync = l64781_readreg (state, 0x32); + int gain = l64781_readreg (state, 0x0e); + + l64781_readreg (state, 0x00); /* clear interrupt registers... */ + l64781_readreg (state, 0x01); /* dto. */ + + *status = 0; + + if (gain > 5) + *status |= FE_HAS_SIGNAL; + + if (sync & 0x02) /* VCXO locked, this criteria should be ok */ + *status |= FE_HAS_CARRIER; + + if (sync & 0x20) + *status |= FE_HAS_VITERBI; + + if (sync & 0x40) + *status |= FE_HAS_SYNC; + + if (sync == 0x7f) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int l64781_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct l64781_state* state = fe->demodulator_priv; + + /* XXX FIXME: set up counting period (reg 0x26...0x28) + */ + *ber = l64781_readreg (state, 0x39) + | (l64781_readreg (state, 0x3a) << 8); + + return 0; +} + +static int l64781_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +{ + struct l64781_state* state = fe->demodulator_priv; + + u8 gain = l64781_readreg (state, 0x0e); + *signal_strength = (gain << 8) | gain; + + return 0; +} + +static int l64781_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct l64781_state* state = fe->demodulator_priv; + + u8 avg_quality = 0xff - l64781_readreg (state, 0x33); + *snr = (avg_quality << 8) | avg_quality; /* not exact, but...*/ + + return 0; +} + +static int l64781_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct l64781_state* state = fe->demodulator_priv; + + *ucblocks = l64781_readreg (state, 0x37) + | (l64781_readreg (state, 0x38) << 8); + + return 0; +} + +static int l64781_sleep(struct dvb_frontend* fe) +{ + struct l64781_state* state = fe->demodulator_priv; + + /* Power down */ + return l64781_writereg (state, 0x3e, 0x5a); +} + +static int l64781_init(struct dvb_frontend* fe) +{ + struct l64781_state* state = fe->demodulator_priv; + + reset_and_configure (state); + + /* Power up */ + l64781_writereg (state, 0x3e, 0xa5); + + /* Reset hard */ + l64781_writereg (state, 0x2a, 0x04); + l64781_writereg (state, 0x2a, 0x00); + + /* Set tuner specific things */ + /* AFC_POL, set also in reset_afc */ + l64781_writereg (state, 0x07, 0x8e); + + /* Use internal ADC */ + l64781_writereg (state, 0x0b, 0x81); + + /* AGC loop gain, and polarity is positive */ + l64781_writereg (state, 0x0c, 0x84); + + /* Internal ADC outputs two's complement */ + l64781_writereg (state, 0x0d, 0x8c); + + /* With ppm=8000, it seems the DTR_SENSITIVITY will result in + value of 2 with all possible bandwidths and guard + intervals, which is the initial value anyway. */ + /*l64781_writereg (state, 0x19, 0x92);*/ + + /* Everything is two's complement, soft bit and CSI_OUT too */ + l64781_writereg (state, 0x1e, 0x09); + + /* delay a bit after first init attempt */ + if (state->first) { + state->first = 0; + msleep(200); + } + + return 0; +} + +static int l64781_get_tune_settings(struct dvb_frontend* fe, + struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 4000; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static void l64781_release(struct dvb_frontend* fe) +{ + struct l64781_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops l64781_ops; + +struct dvb_frontend* l64781_attach(const struct l64781_config* config, + struct i2c_adapter* i2c) +{ + struct l64781_state* state = NULL; + int reg0x3e = -1; + u8 b0 [] = { 0x1a }; + u8 b1 [] = { 0x00 }; + struct i2c_msg msg [] = { { .addr = config->demod_address, .flags = 0, .buf = b0, .len = 1 }, + { .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->first = 1; + + /** + * the L64781 won't show up before we send the reset_and_configure() + * broadcast. If nothing responds there is no L64781 on the bus... + */ + if (reset_and_configure(state) < 0) { + dprintk("No response to reset and configure broadcast...\n"); + goto error; + } + + /* The chip always responds to reads */ + if (i2c_transfer(state->i2c, msg, 2) != 2) { + dprintk("No response to read on I2C bus\n"); + goto error; + } + + /* Save current register contents for bailout */ + reg0x3e = l64781_readreg(state, 0x3e); + + /* Reading the POWER_DOWN register always returns 0 */ + if (reg0x3e != 0) { + dprintk("Device doesn't look like L64781\n"); + goto error; + } + + /* Turn the chip off */ + l64781_writereg (state, 0x3e, 0x5a); + + /* Responds to all reads with 0 */ + if (l64781_readreg(state, 0x1a) != 0) { + dprintk("Read 1 returned unexpcted value\n"); + goto error; + } + + /* Turn the chip on */ + l64781_writereg (state, 0x3e, 0xa5); + + /* Responds with register default value */ + if (l64781_readreg(state, 0x1a) != 0xa1) { + dprintk("Read 2 returned unexpcted value\n"); + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &l64781_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + if (reg0x3e >= 0) + l64781_writereg (state, 0x3e, reg0x3e); /* restore reg 0x3e */ + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops l64781_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "LSI L64781 DVB-T", + /* .frequency_min = ???,*/ + /* .frequency_max = ???,*/ + .frequency_stepsize = 166666, + /* .frequency_tolerance = ???,*/ + /* .symbol_rate_tolerance = ???,*/ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_MUTE_TS + }, + + .release = l64781_release, + + .init = l64781_init, + .sleep = l64781_sleep, + + .set_frontend = apply_frontend_param, + .get_frontend = get_frontend, + .get_tune_settings = l64781_get_tune_settings, + + .read_status = l64781_read_status, + .read_ber = l64781_read_ber, + .read_signal_strength = l64781_read_signal_strength, + .read_snr = l64781_read_snr, + .read_ucblocks = l64781_read_ucblocks, +}; + +MODULE_DESCRIPTION("LSI L64781 DVB-T Demodulator driver"); +MODULE_AUTHOR("Holger Waechtler, Marko Kohtala"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(l64781_attach); diff --git a/drivers/media/dvb-frontends/l64781.h b/drivers/media/dvb-frontends/l64781.h new file mode 100644 index 00000000..6813b08a --- /dev/null +++ b/drivers/media/dvb-frontends/l64781.h @@ -0,0 +1,46 @@ +/* + driver for LSI L64781 COFDM demodulator + + Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH + Marko Kohtala + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef L64781_H +#define L64781_H + +#include + +struct l64781_config +{ + /* the demodulator's i2c address */ + u8 demod_address; +}; + +#if IS_ENABLED(CONFIG_DVB_L64781) +extern struct dvb_frontend* l64781_attach(const struct l64781_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* l64781_attach(const struct l64781_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_L64781 + +#endif // L64781_H diff --git a/drivers/media/dvb-frontends/lg2160.c b/drivers/media/dvb-frontends/lg2160.c new file mode 100644 index 00000000..5fd14f84 --- /dev/null +++ b/drivers/media/dvb-frontends/lg2160.c @@ -0,0 +1,1464 @@ +/* + * Support for LG2160 - ATSC/MH + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include "lg2160.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debug level (info=1, reg=2 (or-able))"); + +#define DBG_INFO 1 +#define DBG_REG 2 + +#define lg_printk(kern, fmt, arg...) \ + printk(kern "%s: " fmt, __func__, ##arg) + +#define lg_info(fmt, arg...) printk(KERN_INFO "lg2160: " fmt, ##arg) +#define lg_warn(fmt, arg...) lg_printk(KERN_WARNING, fmt, ##arg) +#define lg_err(fmt, arg...) lg_printk(KERN_ERR, fmt, ##arg) +#define lg_dbg(fmt, arg...) if (debug & DBG_INFO) \ + lg_printk(KERN_DEBUG, fmt, ##arg) +#define lg_reg(fmt, arg...) if (debug & DBG_REG) \ + lg_printk(KERN_DEBUG, fmt, ##arg) + +#define lg_fail(ret) \ +({ \ + int __ret; \ + __ret = (ret < 0); \ + if (__ret) \ + lg_err("error %d on line %d\n", ret, __LINE__); \ + __ret; \ +}) + +struct lg216x_state { + struct i2c_adapter *i2c_adap; + const struct lg2160_config *cfg; + + struct dvb_frontend frontend; + + u32 current_frequency; + u8 parade_id; + u8 fic_ver; + unsigned int last_reset; +}; + +/* ------------------------------------------------------------------------ */ + +static int lg216x_write_reg(struct lg216x_state *state, u16 reg, u8 val) +{ + int ret; + u8 buf[] = { reg >> 8, reg & 0xff, val }; + struct i2c_msg msg = { + .addr = state->cfg->i2c_addr, .flags = 0, + .buf = buf, .len = 3, + }; + + lg_reg("reg: 0x%04x, val: 0x%02x\n", reg, val); + + ret = i2c_transfer(state->i2c_adap, &msg, 1); + + if (ret != 1) { + lg_err("error (addr %02x %02x <- %02x, err = %i)\n", + msg.buf[0], msg.buf[1], msg.buf[2], ret); + if (ret < 0) + return ret; + else + return -EREMOTEIO; + } + return 0; +} + +static int lg216x_read_reg(struct lg216x_state *state, u16 reg, u8 *val) +{ + int ret; + u8 reg_buf[] = { reg >> 8, reg & 0xff }; + struct i2c_msg msg[] = { + { .addr = state->cfg->i2c_addr, + .flags = 0, .buf = reg_buf, .len = 2 }, + { .addr = state->cfg->i2c_addr, + .flags = I2C_M_RD, .buf = val, .len = 1 }, + }; + + lg_reg("reg: 0x%04x\n", reg); + + ret = i2c_transfer(state->i2c_adap, msg, 2); + + if (ret != 2) { + lg_err("error (addr %02x reg %04x error (ret == %i)\n", + state->cfg->i2c_addr, reg, ret); + if (ret < 0) + return ret; + else + return -EREMOTEIO; + } + return 0; +} + +struct lg216x_reg { + u16 reg; + u8 val; +}; + +static int lg216x_write_regs(struct lg216x_state *state, + struct lg216x_reg *regs, int len) +{ + int i, ret; + + lg_reg("writing %d registers...\n", len); + + for (i = 0; i < len; i++) { + ret = lg216x_write_reg(state, regs[i].reg, regs[i].val); + if (lg_fail(ret)) + return ret; + } + return 0; +} + +static int lg216x_set_reg_bit(struct lg216x_state *state, + u16 reg, int bit, int onoff) +{ + u8 val; + int ret; + + lg_reg("reg: 0x%04x, bit: %d, level: %d\n", reg, bit, onoff); + + ret = lg216x_read_reg(state, reg, &val); + if (lg_fail(ret)) + goto fail; + + val &= ~(1 << bit); + val |= (onoff & 1) << bit; + + ret = lg216x_write_reg(state, reg, val); + lg_fail(ret); +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int lg216x_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct lg216x_state *state = fe->demodulator_priv; + int ret; + + if (state->cfg->deny_i2c_rptr) + return 0; + + lg_dbg("(%d)\n", enable); + + ret = lg216x_set_reg_bit(state, 0x0000, 0, enable ? 0 : 1); + + msleep(1); + + return ret; +} + +static int lg216x_soft_reset(struct lg216x_state *state) +{ + int ret; + + lg_dbg("\n"); + + ret = lg216x_write_reg(state, 0x0002, 0x00); + if (lg_fail(ret)) + goto fail; + + msleep(20); + ret = lg216x_write_reg(state, 0x0002, 0x01); + if (lg_fail(ret)) + goto fail; + + state->last_reset = jiffies_to_msecs(jiffies); +fail: + return ret; +} + +static int lg216x_initialize(struct lg216x_state *state) +{ + int ret; + + static struct lg216x_reg lg2160_init[] = { +#if 0 + { .reg = 0x0015, .val = 0xe6 }, +#else + { .reg = 0x0015, .val = 0xf7 }, + { .reg = 0x001b, .val = 0x52 }, + { .reg = 0x0208, .val = 0x00 }, + { .reg = 0x0209, .val = 0x82 }, + { .reg = 0x0210, .val = 0xf9 }, + { .reg = 0x020a, .val = 0x00 }, + { .reg = 0x020b, .val = 0x82 }, + { .reg = 0x020d, .val = 0x28 }, + { .reg = 0x020f, .val = 0x14 }, +#endif + }; + + static struct lg216x_reg lg2161_init[] = { + { .reg = 0x0000, .val = 0x41 }, + { .reg = 0x0001, .val = 0xfb }, + { .reg = 0x0216, .val = 0x00 }, + { .reg = 0x0219, .val = 0x00 }, + { .reg = 0x021b, .val = 0x55 }, + { .reg = 0x0606, .val = 0x0a }, + }; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg216x_write_regs(state, + lg2160_init, ARRAY_SIZE(lg2160_init)); + break; + case LG2161: + ret = lg216x_write_regs(state, + lg2161_init, ARRAY_SIZE(lg2161_init)); + break; + default: + ret = -EINVAL; + break; + } + if (lg_fail(ret)) + goto fail; + + ret = lg216x_soft_reset(state); + lg_fail(ret); +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int lg216x_set_if(struct lg216x_state *state) +{ + u8 val; + int ret; + + lg_dbg("%d KHz\n", state->cfg->if_khz); + + ret = lg216x_read_reg(state, 0x0132, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xfb; + val |= (0 == state->cfg->if_khz) ? 0x04 : 0x00; + + ret = lg216x_write_reg(state, 0x0132, val); + lg_fail(ret); + + /* if NOT zero IF, 6 MHz is the default */ +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int lg2160_agc_fix(struct lg216x_state *state, + int if_agc_fix, int rf_agc_fix) +{ + u8 val; + int ret; + + ret = lg216x_read_reg(state, 0x0100, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xf3; + val |= (if_agc_fix) ? 0x08 : 0x00; + val |= (rf_agc_fix) ? 0x04 : 0x00; + + ret = lg216x_write_reg(state, 0x0100, val); + lg_fail(ret); +fail: + return ret; +} + +#if 0 +static int lg2160_agc_freeze(struct lg216x_state *state, + int if_agc_freeze, int rf_agc_freeze) +{ + u8 val; + int ret; + + ret = lg216x_read_reg(state, 0x0100, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xcf; + val |= (if_agc_freeze) ? 0x20 : 0x00; + val |= (rf_agc_freeze) ? 0x10 : 0x00; + + ret = lg216x_write_reg(state, 0x0100, val); + lg_fail(ret); +fail: + return ret; +} +#endif + +static int lg2160_agc_polarity(struct lg216x_state *state, + int if_agc_polarity, int rf_agc_polarity) +{ + u8 val; + int ret; + + ret = lg216x_read_reg(state, 0x0100, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xfc; + val |= (if_agc_polarity) ? 0x02 : 0x00; + val |= (rf_agc_polarity) ? 0x01 : 0x00; + + ret = lg216x_write_reg(state, 0x0100, val); + lg_fail(ret); +fail: + return ret; +} + +static int lg2160_tuner_pwr_save_polarity(struct lg216x_state *state, + int polarity) +{ + u8 val; + int ret; + + ret = lg216x_read_reg(state, 0x0008, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xfe; + val |= (polarity) ? 0x01 : 0x00; + + ret = lg216x_write_reg(state, 0x0008, val); + lg_fail(ret); +fail: + return ret; +} + +static int lg2160_spectrum_polarity(struct lg216x_state *state, + int inverted) +{ + u8 val; + int ret; + + ret = lg216x_read_reg(state, 0x0132, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xfd; + val |= (inverted) ? 0x02 : 0x00; + + ret = lg216x_write_reg(state, 0x0132, val); + lg_fail(ret); +fail: + return lg216x_soft_reset(state); +} + +static int lg2160_tuner_pwr_save(struct lg216x_state *state, int onoff) +{ + u8 val; + int ret; + + ret = lg216x_read_reg(state, 0x0007, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xbf; + val |= (onoff) ? 0x40 : 0x00; + + ret = lg216x_write_reg(state, 0x0007, val); + lg_fail(ret); +fail: + return ret; +} + +static int lg216x_set_parade(struct lg216x_state *state, int id) +{ + int ret; + + ret = lg216x_write_reg(state, 0x013e, id & 0x7f); + if (lg_fail(ret)) + goto fail; + + state->parade_id = id & 0x7f; +fail: + return ret; +} + +static int lg216x_set_ensemble(struct lg216x_state *state, int id) +{ + int ret; + u16 reg; + u8 val; + + switch (state->cfg->lg_chip) { + case LG2160: + reg = 0x0400; + break; + case LG2161: + default: + reg = 0x0500; + break; + } + + ret = lg216x_read_reg(state, reg, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xfe; + val |= (id) ? 0x01 : 0x00; + + ret = lg216x_write_reg(state, reg, val); + lg_fail(ret); +fail: + return ret; +} + +static int lg2160_set_spi_clock(struct lg216x_state *state) +{ + u8 val; + int ret; + + ret = lg216x_read_reg(state, 0x0014, &val); + if (lg_fail(ret)) + goto fail; + + val &= 0xf3; + val |= (state->cfg->spi_clock << 2); + + ret = lg216x_write_reg(state, 0x0014, val); + lg_fail(ret); +fail: + return ret; +} + +static int lg2161_set_output_interface(struct lg216x_state *state) +{ + u8 val; + int ret; + + ret = lg216x_read_reg(state, 0x0014, &val); + if (lg_fail(ret)) + goto fail; + + val &= ~0x07; + val |= state->cfg->output_if; /* FIXME: needs sanity check */ + + ret = lg216x_write_reg(state, 0x0014, val); + lg_fail(ret); +fail: + return ret; +} + +static int lg216x_enable_fic(struct lg216x_state *state, int onoff) +{ + int ret; + + ret = lg216x_write_reg(state, 0x0017, 0x23); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_write_reg(state, 0x0016, 0xfc); + if (lg_fail(ret)) + goto fail; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg216x_write_reg(state, 0x0016, + 0xfc | ((onoff) ? 0x02 : 0x00)); + break; + case LG2161: + ret = lg216x_write_reg(state, 0x0016, (onoff) ? 0x10 : 0x00); + break; + } + if (lg_fail(ret)) + goto fail; + + ret = lg216x_initialize(state); + if (lg_fail(ret)) + goto fail; + + if (onoff) { + ret = lg216x_write_reg(state, 0x0017, 0x03); + lg_fail(ret); + } +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int lg216x_get_fic_version(struct lg216x_state *state, u8 *ficver) +{ + u8 val; + int ret; + + *ficver = 0xff; /* invalid value */ + + ret = lg216x_read_reg(state, 0x0128, &val); + if (lg_fail(ret)) + goto fail; + + *ficver = (val >> 3) & 0x1f; +fail: + return ret; +} + +#if 0 +static int lg2160_get_parade_id(struct lg216x_state *state, u8 *id) +{ + u8 val; + int ret; + + *id = 0xff; /* invalid value */ + + ret = lg216x_read_reg(state, 0x0123, &val); + if (lg_fail(ret)) + goto fail; + + *id = val & 0x7f; +fail: + return ret; +} +#endif + +static int lg216x_get_nog(struct lg216x_state *state, u8 *nog) +{ + u8 val; + int ret; + + *nog = 0xff; /* invalid value */ + + ret = lg216x_read_reg(state, 0x0124, &val); + if (lg_fail(ret)) + goto fail; + + *nog = ((val >> 4) & 0x07) + 1; +fail: + return ret; +} + +static int lg216x_get_tnog(struct lg216x_state *state, u8 *tnog) +{ + u8 val; + int ret; + + *tnog = 0xff; /* invalid value */ + + ret = lg216x_read_reg(state, 0x0125, &val); + if (lg_fail(ret)) + goto fail; + + *tnog = val & 0x1f; +fail: + return ret; +} + +static int lg216x_get_sgn(struct lg216x_state *state, u8 *sgn) +{ + u8 val; + int ret; + + *sgn = 0xff; /* invalid value */ + + ret = lg216x_read_reg(state, 0x0124, &val); + if (lg_fail(ret)) + goto fail; + + *sgn = val & 0x0f; +fail: + return ret; +} + +static int lg216x_get_prc(struct lg216x_state *state, u8 *prc) +{ + u8 val; + int ret; + + *prc = 0xff; /* invalid value */ + + ret = lg216x_read_reg(state, 0x0125, &val); + if (lg_fail(ret)) + goto fail; + + *prc = ((val >> 5) & 0x07) + 1; +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int lg216x_get_rs_frame_mode(struct lg216x_state *state, + enum atscmh_rs_frame_mode *rs_framemode) +{ + u8 val; + int ret; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg216x_read_reg(state, 0x0410, &val); + break; + case LG2161: + ret = lg216x_read_reg(state, 0x0513, &val); + break; + default: + ret = -EINVAL; + } + if (lg_fail(ret)) + goto fail; + + switch ((val >> 4) & 0x03) { +#if 1 + default: +#endif + case 0x00: + *rs_framemode = ATSCMH_RSFRAME_PRI_ONLY; + break; + case 0x01: + *rs_framemode = ATSCMH_RSFRAME_PRI_SEC; + break; +#if 0 + default: + *rs_framemode = ATSCMH_RSFRAME_RES; + break; +#endif + } +fail: + return ret; +} + +static +int lg216x_get_rs_frame_ensemble(struct lg216x_state *state, + enum atscmh_rs_frame_ensemble *rs_frame_ens) +{ + u8 val; + int ret; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg216x_read_reg(state, 0x0400, &val); + break; + case LG2161: + ret = lg216x_read_reg(state, 0x0500, &val); + break; + default: + ret = -EINVAL; + } + if (lg_fail(ret)) + goto fail; + + val &= 0x01; + *rs_frame_ens = (enum atscmh_rs_frame_ensemble) val; +fail: + return ret; +} + +static int lg216x_get_rs_code_mode(struct lg216x_state *state, + enum atscmh_rs_code_mode *rs_code_pri, + enum atscmh_rs_code_mode *rs_code_sec) +{ + u8 val; + int ret; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg216x_read_reg(state, 0x0410, &val); + break; + case LG2161: + ret = lg216x_read_reg(state, 0x0513, &val); + break; + default: + ret = -EINVAL; + } + if (lg_fail(ret)) + goto fail; + + *rs_code_pri = (enum atscmh_rs_code_mode) ((val >> 2) & 0x03); + *rs_code_sec = (enum atscmh_rs_code_mode) (val & 0x03); +fail: + return ret; +} + +static int lg216x_get_sccc_block_mode(struct lg216x_state *state, + enum atscmh_sccc_block_mode *sccc_block) +{ + u8 val; + int ret; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg216x_read_reg(state, 0x0315, &val); + break; + case LG2161: + ret = lg216x_read_reg(state, 0x0511, &val); + break; + default: + ret = -EINVAL; + } + if (lg_fail(ret)) + goto fail; + + switch (val & 0x03) { + case 0x00: + *sccc_block = ATSCMH_SCCC_BLK_SEP; + break; + case 0x01: + *sccc_block = ATSCMH_SCCC_BLK_COMB; + break; + default: + *sccc_block = ATSCMH_SCCC_BLK_RES; + break; + } +fail: + return ret; +} + +static int lg216x_get_sccc_code_mode(struct lg216x_state *state, + enum atscmh_sccc_code_mode *mode_a, + enum atscmh_sccc_code_mode *mode_b, + enum atscmh_sccc_code_mode *mode_c, + enum atscmh_sccc_code_mode *mode_d) +{ + u8 val; + int ret; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg216x_read_reg(state, 0x0316, &val); + break; + case LG2161: + ret = lg216x_read_reg(state, 0x0512, &val); + break; + default: + ret = -EINVAL; + } + if (lg_fail(ret)) + goto fail; + + switch ((val >> 6) & 0x03) { + case 0x00: + *mode_a = ATSCMH_SCCC_CODE_HLF; + break; + case 0x01: + *mode_a = ATSCMH_SCCC_CODE_QTR; + break; + default: + *mode_a = ATSCMH_SCCC_CODE_RES; + break; + } + + switch ((val >> 4) & 0x03) { + case 0x00: + *mode_b = ATSCMH_SCCC_CODE_HLF; + break; + case 0x01: + *mode_b = ATSCMH_SCCC_CODE_QTR; + break; + default: + *mode_b = ATSCMH_SCCC_CODE_RES; + break; + } + + switch ((val >> 2) & 0x03) { + case 0x00: + *mode_c = ATSCMH_SCCC_CODE_HLF; + break; + case 0x01: + *mode_c = ATSCMH_SCCC_CODE_QTR; + break; + default: + *mode_c = ATSCMH_SCCC_CODE_RES; + break; + } + + switch (val & 0x03) { + case 0x00: + *mode_d = ATSCMH_SCCC_CODE_HLF; + break; + case 0x01: + *mode_d = ATSCMH_SCCC_CODE_QTR; + break; + default: + *mode_d = ATSCMH_SCCC_CODE_RES; + break; + } +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +#if 0 +static int lg216x_read_fic_err_count(struct lg216x_state *state, u8 *err) +{ + u8 fic_err; + int ret; + + *err = 0; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg216x_read_reg(state, 0x0012, &fic_err); + break; + case LG2161: + ret = lg216x_read_reg(state, 0x001e, &fic_err); + break; + } + if (lg_fail(ret)) + goto fail; + + *err = fic_err; +fail: + return ret; +} + +static int lg2160_read_crc_err_count(struct lg216x_state *state, u16 *err) +{ + u8 crc_err1, crc_err2; + int ret; + + *err = 0; + + ret = lg216x_read_reg(state, 0x0411, &crc_err1); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_read_reg(state, 0x0412, &crc_err2); + if (lg_fail(ret)) + goto fail; + + *err = (u16)(((crc_err2 & 0x0f) << 8) | crc_err1); +fail: + return ret; +} + +static int lg2161_read_crc_err_count(struct lg216x_state *state, u16 *err) +{ + u8 crc_err; + int ret; + + *err = 0; + + ret = lg216x_read_reg(state, 0x0612, &crc_err); + if (lg_fail(ret)) + goto fail; + + *err = (u16)crc_err; +fail: + return ret; +} + +static int lg216x_read_crc_err_count(struct lg216x_state *state, u16 *err) +{ + int ret; + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg2160_read_crc_err_count(state, err); + break; + case LG2161: + ret = lg2161_read_crc_err_count(state, err); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int lg2160_read_rs_err_count(struct lg216x_state *state, u16 *err) +{ + u8 rs_err1, rs_err2; + int ret; + + *err = 0; + + ret = lg216x_read_reg(state, 0x0413, &rs_err1); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_read_reg(state, 0x0414, &rs_err2); + if (lg_fail(ret)) + goto fail; + + *err = (u16)(((rs_err2 & 0x0f) << 8) | rs_err1); +fail: + return ret; +} + +static int lg2161_read_rs_err_count(struct lg216x_state *state, u16 *err) +{ + u8 rs_err1, rs_err2; + int ret; + + *err = 0; + + ret = lg216x_read_reg(state, 0x0613, &rs_err1); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_read_reg(state, 0x0614, &rs_err2); + if (lg_fail(ret)) + goto fail; + + *err = (u16)((rs_err1 << 8) | rs_err2); +fail: + return ret; +} + +static int lg216x_read_rs_err_count(struct lg216x_state *state, u16 *err) +{ + int ret; + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg2160_read_rs_err_count(state, err); + break; + case LG2161: + ret = lg2161_read_rs_err_count(state, err); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} +#endif + +/* ------------------------------------------------------------------------ */ + +static int lg216x_get_frontend(struct dvb_frontend *fe) +{ + struct lg216x_state *state = fe->demodulator_priv; + int ret; + + lg_dbg("\n"); + + fe->dtv_property_cache.modulation = VSB_8; + fe->dtv_property_cache.frequency = state->current_frequency; + fe->dtv_property_cache.delivery_system = SYS_ATSCMH; + + ret = lg216x_get_fic_version(state, + &fe->dtv_property_cache.atscmh_fic_ver); + if (lg_fail(ret)) + goto fail; + if (state->fic_ver != fe->dtv_property_cache.atscmh_fic_ver) { + state->fic_ver = fe->dtv_property_cache.atscmh_fic_ver; + +#if 0 + ret = lg2160_get_parade_id(state, + &fe->dtv_property_cache.atscmh_parade_id); + if (lg_fail(ret)) + goto fail; +/* #else */ + fe->dtv_property_cache.atscmh_parade_id = state->parade_id; +#endif + ret = lg216x_get_nog(state, + &fe->dtv_property_cache.atscmh_nog); + if (lg_fail(ret)) + goto fail; + ret = lg216x_get_tnog(state, + &fe->dtv_property_cache.atscmh_tnog); + if (lg_fail(ret)) + goto fail; + ret = lg216x_get_sgn(state, + &fe->dtv_property_cache.atscmh_sgn); + if (lg_fail(ret)) + goto fail; + ret = lg216x_get_prc(state, + &fe->dtv_property_cache.atscmh_prc); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_get_rs_frame_mode(state, + (enum atscmh_rs_frame_mode *) + &fe->dtv_property_cache.atscmh_rs_frame_mode); + if (lg_fail(ret)) + goto fail; + ret = lg216x_get_rs_frame_ensemble(state, + (enum atscmh_rs_frame_ensemble *) + &fe->dtv_property_cache.atscmh_rs_frame_ensemble); + if (lg_fail(ret)) + goto fail; + ret = lg216x_get_rs_code_mode(state, + (enum atscmh_rs_code_mode *) + &fe->dtv_property_cache.atscmh_rs_code_mode_pri, + (enum atscmh_rs_code_mode *) + &fe->dtv_property_cache.atscmh_rs_code_mode_sec); + if (lg_fail(ret)) + goto fail; + ret = lg216x_get_sccc_block_mode(state, + (enum atscmh_sccc_block_mode *) + &fe->dtv_property_cache.atscmh_sccc_block_mode); + if (lg_fail(ret)) + goto fail; + ret = lg216x_get_sccc_code_mode(state, + (enum atscmh_sccc_code_mode *) + &fe->dtv_property_cache.atscmh_sccc_code_mode_a, + (enum atscmh_sccc_code_mode *) + &fe->dtv_property_cache.atscmh_sccc_code_mode_b, + (enum atscmh_sccc_code_mode *) + &fe->dtv_property_cache.atscmh_sccc_code_mode_c, + (enum atscmh_sccc_code_mode *) + &fe->dtv_property_cache.atscmh_sccc_code_mode_d); + if (lg_fail(ret)) + goto fail; + } +#if 0 + ret = lg216x_read_fic_err_count(state, + (u8 *)&fe->dtv_property_cache.atscmh_fic_err); + if (lg_fail(ret)) + goto fail; + ret = lg216x_read_crc_err_count(state, + &fe->dtv_property_cache.atscmh_crc_err); + if (lg_fail(ret)) + goto fail; + ret = lg216x_read_rs_err_count(state, + &fe->dtv_property_cache.atscmh_rs_err); + if (lg_fail(ret)) + goto fail; + + switch (state->cfg->lg_chip) { + case LG2160: + if (((fe->dtv_property_cache.atscmh_rs_err >= 240) && + (fe->dtv_property_cache.atscmh_crc_err >= 240)) && + ((jiffies_to_msecs(jiffies) - state->last_reset) > 6000)) + ret = lg216x_soft_reset(state); + break; + case LG2161: + /* no fix needed here (as far as we know) */ + ret = 0; + break; + } + lg_fail(ret); +#endif +fail: + return ret; +} + +static int lg216x_get_property(struct dvb_frontend *fe, + struct dtv_property *tvp) +{ + return (DTV_ATSCMH_FIC_VER == tvp->cmd) ? + lg216x_get_frontend(fe) : 0; +} + + +static int lg2160_set_frontend(struct dvb_frontend *fe) +{ + struct lg216x_state *state = fe->demodulator_priv; + int ret; + + lg_dbg("(%d)\n", fe->dtv_property_cache.frequency); + + if (fe->ops.tuner_ops.set_params) { + ret = fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + if (lg_fail(ret)) + goto fail; + state->current_frequency = fe->dtv_property_cache.frequency; + } + + ret = lg2160_agc_fix(state, 0, 0); + if (lg_fail(ret)) + goto fail; + ret = lg2160_agc_polarity(state, 0, 0); + if (lg_fail(ret)) + goto fail; + ret = lg2160_tuner_pwr_save_polarity(state, 1); + if (lg_fail(ret)) + goto fail; + ret = lg216x_set_if(state); + if (lg_fail(ret)) + goto fail; + ret = lg2160_spectrum_polarity(state, state->cfg->spectral_inversion); + if (lg_fail(ret)) + goto fail; + + /* be tuned before this point */ + ret = lg216x_soft_reset(state); + if (lg_fail(ret)) + goto fail; + + ret = lg2160_tuner_pwr_save(state, 0); + if (lg_fail(ret)) + goto fail; + + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg2160_set_spi_clock(state); + if (lg_fail(ret)) + goto fail; + break; + case LG2161: + ret = lg2161_set_output_interface(state); + if (lg_fail(ret)) + goto fail; + break; + } + + ret = lg216x_set_parade(state, fe->dtv_property_cache.atscmh_parade_id); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_set_ensemble(state, + fe->dtv_property_cache.atscmh_rs_frame_ensemble); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_initialize(state); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_enable_fic(state, 1); + lg_fail(ret); + + lg216x_get_frontend(fe); +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int lg2160_read_lock_status(struct lg216x_state *state, + int *acq_lock, int *sync_lock) +{ + u8 val; + int ret; + + *acq_lock = 0; + *sync_lock = 0; + + ret = lg216x_read_reg(state, 0x011b, &val); + if (lg_fail(ret)) + goto fail; + + *sync_lock = (val & 0x20) ? 0 : 1; + *acq_lock = (val & 0x40) ? 0 : 1; +fail: + return ret; +} + +#ifdef USE_LG2161_LOCK_BITS +static int lg2161_read_lock_status(struct lg216x_state *state, + int *acq_lock, int *sync_lock) +{ + u8 val; + int ret; + + *acq_lock = 0; + *sync_lock = 0; + + ret = lg216x_read_reg(state, 0x0304, &val); + if (lg_fail(ret)) + goto fail; + + *sync_lock = (val & 0x80) ? 0 : 1; + + ret = lg216x_read_reg(state, 0x011b, &val); + if (lg_fail(ret)) + goto fail; + + *acq_lock = (val & 0x40) ? 0 : 1; +fail: + return ret; +} +#endif + +static int lg216x_read_lock_status(struct lg216x_state *state, + int *acq_lock, int *sync_lock) +{ +#ifdef USE_LG2161_LOCK_BITS + int ret; + switch (state->cfg->lg_chip) { + case LG2160: + ret = lg2160_read_lock_status(state, acq_lock, sync_lock); + break; + case LG2161: + ret = lg2161_read_lock_status(state, acq_lock, sync_lock); + break; + default: + ret = -EINVAL; + break; + } + return ret; +#else + return lg2160_read_lock_status(state, acq_lock, sync_lock); +#endif +} + +static int lg216x_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct lg216x_state *state = fe->demodulator_priv; + int ret, acq_lock, sync_lock; + + *status = 0; + + ret = lg216x_read_lock_status(state, &acq_lock, &sync_lock); + if (lg_fail(ret)) + goto fail; + + lg_dbg("%s%s\n", + acq_lock ? "SIGNALEXIST " : "", + sync_lock ? "SYNCLOCK" : ""); + + if (acq_lock) + *status |= FE_HAS_SIGNAL; + if (sync_lock) + *status |= FE_HAS_SYNC; + + if (*status) + *status |= FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_LOCK; + +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int lg2160_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct lg216x_state *state = fe->demodulator_priv; + u8 snr1, snr2; + int ret; + + *snr = 0; + + ret = lg216x_read_reg(state, 0x0202, &snr1); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_read_reg(state, 0x0203, &snr2); + if (lg_fail(ret)) + goto fail; + + if ((snr1 == 0xba) || (snr2 == 0xdf)) + *snr = 0; + else +#if 1 + *snr = ((snr1 >> 4) * 100) + ((snr1 & 0x0f) * 10) + (snr2 >> 4); +#else /* BCD */ + *snr = (snr2 | (snr1 << 8)); +#endif +fail: + return ret; +} + +static int lg2161_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct lg216x_state *state = fe->demodulator_priv; + u8 snr1, snr2; + int ret; + + *snr = 0; + + ret = lg216x_read_reg(state, 0x0302, &snr1); + if (lg_fail(ret)) + goto fail; + + ret = lg216x_read_reg(state, 0x0303, &snr2); + if (lg_fail(ret)) + goto fail; + + if ((snr1 == 0xba) || (snr2 == 0xfd)) + *snr = 0; + else + + *snr = ((snr1 >> 4) * 100) + ((snr1 & 0x0f) * 10) + (snr2 & 0x0f); +fail: + return ret; +} + +static int lg216x_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ +#if 0 + /* borrowed from lgdt330x.c + * + * Calculate strength from SNR up to 35dB + * Even though the SNR can go higher than 35dB, + * there is some comfort factor in having a range of + * strong signals that can show at 100% + */ + struct lg216x_state *state = fe->demodulator_priv; + u16 snr; + int ret; +#endif + *strength = 0; +#if 0 + ret = fe->ops.read_snr(fe, &snr); + if (lg_fail(ret)) + goto fail; + /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */ + /* scale the range 0 - 35*2^24 into 0 - 65535 */ + if (state->snr >= 8960 * 0x10000) + *strength = 0xffff; + else + *strength = state->snr / 8960; +fail: + return ret; +#else + return 0; +#endif +} + +/* ------------------------------------------------------------------------ */ + +static int lg216x_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ +#if 0 + struct lg216x_state *state = fe->demodulator_priv; + int ret; + + ret = lg216x_read_rs_err_count(state, + &fe->dtv_property_cache.atscmh_rs_err); + if (lg_fail(ret)) + goto fail; + + *ucblocks = fe->dtv_property_cache.atscmh_rs_err; +fail: +#else + *ucblocks = 0; +#endif + return 0; +} + +static int lg216x_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings + *fe_tune_settings) +{ + fe_tune_settings->min_delay_ms = 500; + lg_dbg("\n"); + return 0; +} + +static void lg216x_release(struct dvb_frontend *fe) +{ + struct lg216x_state *state = fe->demodulator_priv; + lg_dbg("\n"); + kfree(state); +} + +static struct dvb_frontend_ops lg2160_ops = { + .delsys = { SYS_ATSCMH }, + .info = { + .name = "LG Electronics LG2160 ATSC/MH Frontend", + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + }, + .i2c_gate_ctrl = lg216x_i2c_gate_ctrl, +#if 0 + .init = lg216x_init, + .sleep = lg216x_sleep, +#endif + .get_property = lg216x_get_property, + + .set_frontend = lg2160_set_frontend, + .get_frontend = lg216x_get_frontend, + .get_tune_settings = lg216x_get_tune_settings, + .read_status = lg216x_read_status, +#if 0 + .read_ber = lg216x_read_ber, +#endif + .read_signal_strength = lg216x_read_signal_strength, + .read_snr = lg2160_read_snr, + .read_ucblocks = lg216x_read_ucblocks, + .release = lg216x_release, +}; + +static struct dvb_frontend_ops lg2161_ops = { + .delsys = { SYS_ATSCMH }, + .info = { + .name = "LG Electronics LG2161 ATSC/MH Frontend", + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + }, + .i2c_gate_ctrl = lg216x_i2c_gate_ctrl, +#if 0 + .init = lg216x_init, + .sleep = lg216x_sleep, +#endif + .get_property = lg216x_get_property, + + .set_frontend = lg2160_set_frontend, + .get_frontend = lg216x_get_frontend, + .get_tune_settings = lg216x_get_tune_settings, + .read_status = lg216x_read_status, +#if 0 + .read_ber = lg216x_read_ber, +#endif + .read_signal_strength = lg216x_read_signal_strength, + .read_snr = lg2161_read_snr, + .read_ucblocks = lg216x_read_ucblocks, + .release = lg216x_release, +}; + +struct dvb_frontend *lg2160_attach(const struct lg2160_config *config, + struct i2c_adapter *i2c_adap) +{ + struct lg216x_state *state = NULL; + + lg_dbg("(%d-%04x)\n", + i2c_adap ? i2c_adapter_id(i2c_adap) : 0, + config ? config->i2c_addr : 0); + + state = kzalloc(sizeof(struct lg216x_state), GFP_KERNEL); + if (!state) + return NULL; + + state->cfg = config; + state->i2c_adap = i2c_adap; + state->fic_ver = 0xff; + state->parade_id = 0xff; + + switch (config->lg_chip) { + default: + lg_warn("invalid chip requested, defaulting to LG2160"); + /* fall-thru */ + case LG2160: + memcpy(&state->frontend.ops, &lg2160_ops, + sizeof(struct dvb_frontend_ops)); + break; + case LG2161: + memcpy(&state->frontend.ops, &lg2161_ops, + sizeof(struct dvb_frontend_ops)); + break; + } + + state->frontend.demodulator_priv = state; + state->current_frequency = -1; + /* parade 1 by default */ + state->frontend.dtv_property_cache.atscmh_parade_id = 1; + + return &state->frontend; +} +EXPORT_SYMBOL(lg2160_attach); + +MODULE_DESCRIPTION("LG Electronics LG216x ATSC/MH Demodulator Driver"); +MODULE_AUTHOR("Michael Krufky "); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.3"); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb-frontends/lg2160.h b/drivers/media/dvb-frontends/lg2160.h new file mode 100644 index 00000000..194a07a7 --- /dev/null +++ b/drivers/media/dvb-frontends/lg2160.h @@ -0,0 +1,84 @@ +/* + * Support for LG2160 - ATSC/MH + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _LG2160_H_ +#define _LG2160_H_ + +#include +#include +#include "dvb_frontend.h" + +enum lg_chip_type { + LG2160 = 0, + LG2161 = 1, +}; + +#define LG2161_1019 LG2161 +#define LG2161_1040 LG2161 + +enum lg2160_spi_clock { + LG2160_SPI_3_125_MHZ = 0, + LG2160_SPI_6_25_MHZ = 1, + LG2160_SPI_12_5_MHZ = 2, +}; + +#if 0 +enum lg2161_oif { + LG2161_OIF_EBI2_SLA = 1, + LG2161_OIF_SDIO_SLA = 2, + LG2161_OIF_SPI_SLA = 3, + LG2161_OIF_SPI_MAS = 4, + LG2161_OIF_SERIAL_TS = 7, +}; +#endif + +struct lg2160_config { + u8 i2c_addr; + + /* user defined IF frequency in KHz */ + u16 if_khz; + + /* disable i2c repeater - 0:repeater enabled 1:repeater disabled */ + unsigned int deny_i2c_rptr:1; + + /* spectral inversion - 0:disabled 1:enabled */ + unsigned int spectral_inversion:1; + + unsigned int output_if; + enum lg2160_spi_clock spi_clock; + enum lg_chip_type lg_chip; +}; + +#if IS_ENABLED(CONFIG_DVB_LG2160) +extern +struct dvb_frontend *lg2160_attach(const struct lg2160_config *config, + struct i2c_adapter *i2c_adap); +#else +static inline +struct dvb_frontend *lg2160_attach(const struct lg2160_config *config, + struct i2c_adapter *i2c_adap) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_LG2160 */ + +#endif /* _LG2160_H_ */ diff --git a/drivers/media/dvb-frontends/lgdt3305.c b/drivers/media/dvb-frontends/lgdt3305.c new file mode 100644 index 00000000..1d2c4737 --- /dev/null +++ b/drivers/media/dvb-frontends/lgdt3305.c @@ -0,0 +1,1222 @@ +/* + * Support for LG Electronics LGDT3304 and LGDT3305 - VSB/QAM + * + * Copyright (C) 2008, 2009, 2010 Michael Krufky + * + * LGDT3304 support by Jarod Wilson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include "dvb_math.h" +#include "lgdt3305.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debug level (info=1, reg=2 (or-able))"); + +#define DBG_INFO 1 +#define DBG_REG 2 + +#define lg_printk(kern, fmt, arg...) \ + printk(kern "%s: " fmt, __func__, ##arg) + +#define lg_info(fmt, arg...) printk(KERN_INFO "lgdt3305: " fmt, ##arg) +#define lg_warn(fmt, arg...) lg_printk(KERN_WARNING, fmt, ##arg) +#define lg_err(fmt, arg...) lg_printk(KERN_ERR, fmt, ##arg) +#define lg_dbg(fmt, arg...) if (debug & DBG_INFO) \ + lg_printk(KERN_DEBUG, fmt, ##arg) +#define lg_reg(fmt, arg...) if (debug & DBG_REG) \ + lg_printk(KERN_DEBUG, fmt, ##arg) + +#define lg_fail(ret) \ +({ \ + int __ret; \ + __ret = (ret < 0); \ + if (__ret) \ + lg_err("error %d on line %d\n", ret, __LINE__); \ + __ret; \ +}) + +struct lgdt3305_state { + struct i2c_adapter *i2c_adap; + const struct lgdt3305_config *cfg; + + struct dvb_frontend frontend; + + fe_modulation_t current_modulation; + u32 current_frequency; + u32 snr; +}; + +/* ------------------------------------------------------------------------ */ + +/* FIXME: verify & document the LGDT3304 registers */ + +#define LGDT3305_GEN_CTRL_1 0x0000 +#define LGDT3305_GEN_CTRL_2 0x0001 +#define LGDT3305_GEN_CTRL_3 0x0002 +#define LGDT3305_GEN_STATUS 0x0003 +#define LGDT3305_GEN_CONTROL 0x0007 +#define LGDT3305_GEN_CTRL_4 0x000a +#define LGDT3305_DGTL_AGC_REF_1 0x0012 +#define LGDT3305_DGTL_AGC_REF_2 0x0013 +#define LGDT3305_CR_CTR_FREQ_1 0x0106 +#define LGDT3305_CR_CTR_FREQ_2 0x0107 +#define LGDT3305_CR_CTR_FREQ_3 0x0108 +#define LGDT3305_CR_CTR_FREQ_4 0x0109 +#define LGDT3305_CR_MSE_1 0x011b +#define LGDT3305_CR_MSE_2 0x011c +#define LGDT3305_CR_LOCK_STATUS 0x011d +#define LGDT3305_CR_CTRL_7 0x0126 +#define LGDT3305_AGC_POWER_REF_1 0x0300 +#define LGDT3305_AGC_POWER_REF_2 0x0301 +#define LGDT3305_AGC_DELAY_PT_1 0x0302 +#define LGDT3305_AGC_DELAY_PT_2 0x0303 +#define LGDT3305_RFAGC_LOOP_FLTR_BW_1 0x0306 +#define LGDT3305_RFAGC_LOOP_FLTR_BW_2 0x0307 +#define LGDT3305_IFBW_1 0x0308 +#define LGDT3305_IFBW_2 0x0309 +#define LGDT3305_AGC_CTRL_1 0x030c +#define LGDT3305_AGC_CTRL_4 0x0314 +#define LGDT3305_EQ_MSE_1 0x0413 +#define LGDT3305_EQ_MSE_2 0x0414 +#define LGDT3305_EQ_MSE_3 0x0415 +#define LGDT3305_PT_MSE_1 0x0417 +#define LGDT3305_PT_MSE_2 0x0418 +#define LGDT3305_PT_MSE_3 0x0419 +#define LGDT3305_FEC_BLOCK_CTRL 0x0504 +#define LGDT3305_FEC_LOCK_STATUS 0x050a +#define LGDT3305_FEC_PKT_ERR_1 0x050c +#define LGDT3305_FEC_PKT_ERR_2 0x050d +#define LGDT3305_TP_CTRL_1 0x050e +#define LGDT3305_BERT_PERIOD 0x0801 +#define LGDT3305_BERT_ERROR_COUNT_1 0x080a +#define LGDT3305_BERT_ERROR_COUNT_2 0x080b +#define LGDT3305_BERT_ERROR_COUNT_3 0x080c +#define LGDT3305_BERT_ERROR_COUNT_4 0x080d + +static int lgdt3305_write_reg(struct lgdt3305_state *state, u16 reg, u8 val) +{ + int ret; + u8 buf[] = { reg >> 8, reg & 0xff, val }; + struct i2c_msg msg = { + .addr = state->cfg->i2c_addr, .flags = 0, + .buf = buf, .len = 3, + }; + + lg_reg("reg: 0x%04x, val: 0x%02x\n", reg, val); + + ret = i2c_transfer(state->i2c_adap, &msg, 1); + + if (ret != 1) { + lg_err("error (addr %02x %02x <- %02x, err = %i)\n", + msg.buf[0], msg.buf[1], msg.buf[2], ret); + if (ret < 0) + return ret; + else + return -EREMOTEIO; + } + return 0; +} + +static int lgdt3305_read_reg(struct lgdt3305_state *state, u16 reg, u8 *val) +{ + int ret; + u8 reg_buf[] = { reg >> 8, reg & 0xff }; + struct i2c_msg msg[] = { + { .addr = state->cfg->i2c_addr, + .flags = 0, .buf = reg_buf, .len = 2 }, + { .addr = state->cfg->i2c_addr, + .flags = I2C_M_RD, .buf = val, .len = 1 }, + }; + + lg_reg("reg: 0x%04x\n", reg); + + ret = i2c_transfer(state->i2c_adap, msg, 2); + + if (ret != 2) { + lg_err("error (addr %02x reg %04x error (ret == %i)\n", + state->cfg->i2c_addr, reg, ret); + if (ret < 0) + return ret; + else + return -EREMOTEIO; + } + return 0; +} + +#define read_reg(state, reg) \ +({ \ + u8 __val; \ + int ret = lgdt3305_read_reg(state, reg, &__val); \ + if (lg_fail(ret)) \ + __val = 0; \ + __val; \ +}) + +static int lgdt3305_set_reg_bit(struct lgdt3305_state *state, + u16 reg, int bit, int onoff) +{ + u8 val; + int ret; + + lg_reg("reg: 0x%04x, bit: %d, level: %d\n", reg, bit, onoff); + + ret = lgdt3305_read_reg(state, reg, &val); + if (lg_fail(ret)) + goto fail; + + val &= ~(1 << bit); + val |= (onoff & 1) << bit; + + ret = lgdt3305_write_reg(state, reg, val); +fail: + return ret; +} + +struct lgdt3305_reg { + u16 reg; + u8 val; +}; + +static int lgdt3305_write_regs(struct lgdt3305_state *state, + struct lgdt3305_reg *regs, int len) +{ + int i, ret; + + lg_reg("writing %d registers...\n", len); + + for (i = 0; i < len - 1; i++) { + ret = lgdt3305_write_reg(state, regs[i].reg, regs[i].val); + if (lg_fail(ret)) + return ret; + } + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static int lgdt3305_soft_reset(struct lgdt3305_state *state) +{ + int ret; + + lg_dbg("\n"); + + ret = lgdt3305_set_reg_bit(state, LGDT3305_GEN_CTRL_3, 0, 0); + if (lg_fail(ret)) + goto fail; + + msleep(20); + ret = lgdt3305_set_reg_bit(state, LGDT3305_GEN_CTRL_3, 0, 1); +fail: + return ret; +} + +static inline int lgdt3305_mpeg_mode(struct lgdt3305_state *state, + enum lgdt3305_mpeg_mode mode) +{ + lg_dbg("(%d)\n", mode); + return lgdt3305_set_reg_bit(state, LGDT3305_TP_CTRL_1, 5, mode); +} + +static int lgdt3305_mpeg_mode_polarity(struct lgdt3305_state *state, + enum lgdt3305_tp_clock_edge edge, + enum lgdt3305_tp_valid_polarity valid) +{ + u8 val; + int ret; + + lg_dbg("edge = %d, valid = %d\n", edge, valid); + + ret = lgdt3305_read_reg(state, LGDT3305_TP_CTRL_1, &val); + if (lg_fail(ret)) + goto fail; + + val &= ~0x09; + + if (edge) + val |= 0x08; + if (valid) + val |= 0x01; + + ret = lgdt3305_write_reg(state, LGDT3305_TP_CTRL_1, val); + if (lg_fail(ret)) + goto fail; + + ret = lgdt3305_soft_reset(state); +fail: + return ret; +} + +static int lgdt3305_set_modulation(struct lgdt3305_state *state, + struct dtv_frontend_properties *p) +{ + u8 opermode; + int ret; + + lg_dbg("\n"); + + ret = lgdt3305_read_reg(state, LGDT3305_GEN_CTRL_1, &opermode); + if (lg_fail(ret)) + goto fail; + + opermode &= ~0x03; + + switch (p->modulation) { + case VSB_8: + opermode |= 0x03; + break; + case QAM_64: + opermode |= 0x00; + break; + case QAM_256: + opermode |= 0x01; + break; + default: + return -EINVAL; + } + ret = lgdt3305_write_reg(state, LGDT3305_GEN_CTRL_1, opermode); +fail: + return ret; +} + +static int lgdt3305_set_filter_extension(struct lgdt3305_state *state, + struct dtv_frontend_properties *p) +{ + int val; + + switch (p->modulation) { + case VSB_8: + val = 0; + break; + case QAM_64: + case QAM_256: + val = 1; + break; + default: + return -EINVAL; + } + lg_dbg("val = %d\n", val); + + return lgdt3305_set_reg_bit(state, 0x043f, 2, val); +} + +/* ------------------------------------------------------------------------ */ + +static int lgdt3305_passband_digital_agc(struct lgdt3305_state *state, + struct dtv_frontend_properties *p) +{ + u16 agc_ref; + + switch (p->modulation) { + case VSB_8: + agc_ref = 0x32c4; + break; + case QAM_64: + agc_ref = 0x2a00; + break; + case QAM_256: + agc_ref = 0x2a80; + break; + default: + return -EINVAL; + } + + lg_dbg("agc ref: 0x%04x\n", agc_ref); + + lgdt3305_write_reg(state, LGDT3305_DGTL_AGC_REF_1, agc_ref >> 8); + lgdt3305_write_reg(state, LGDT3305_DGTL_AGC_REF_2, agc_ref & 0xff); + + return 0; +} + +static int lgdt3305_rfagc_loop(struct lgdt3305_state *state, + struct dtv_frontend_properties *p) +{ + u16 ifbw, rfbw, agcdelay; + + switch (p->modulation) { + case VSB_8: + agcdelay = 0x04c0; + rfbw = 0x8000; + ifbw = 0x8000; + break; + case QAM_64: + case QAM_256: + agcdelay = 0x046b; + rfbw = 0x8889; + /* FIXME: investigate optimal ifbw & rfbw values for the + * DT3304 and re-write this switch..case block */ + if (state->cfg->demod_chip == LGDT3304) + ifbw = 0x6666; + else /* (state->cfg->demod_chip == LGDT3305) */ + ifbw = 0x8888; + break; + default: + return -EINVAL; + } + + if (state->cfg->rf_agc_loop) { + lg_dbg("agcdelay: 0x%04x, rfbw: 0x%04x\n", agcdelay, rfbw); + + /* rf agc loop filter bandwidth */ + lgdt3305_write_reg(state, LGDT3305_AGC_DELAY_PT_1, + agcdelay >> 8); + lgdt3305_write_reg(state, LGDT3305_AGC_DELAY_PT_2, + agcdelay & 0xff); + + lgdt3305_write_reg(state, LGDT3305_RFAGC_LOOP_FLTR_BW_1, + rfbw >> 8); + lgdt3305_write_reg(state, LGDT3305_RFAGC_LOOP_FLTR_BW_2, + rfbw & 0xff); + } else { + lg_dbg("ifbw: 0x%04x\n", ifbw); + + /* if agc loop filter bandwidth */ + lgdt3305_write_reg(state, LGDT3305_IFBW_1, ifbw >> 8); + lgdt3305_write_reg(state, LGDT3305_IFBW_2, ifbw & 0xff); + } + + return 0; +} + +static int lgdt3305_agc_setup(struct lgdt3305_state *state, + struct dtv_frontend_properties *p) +{ + int lockdten, acqen; + + switch (p->modulation) { + case VSB_8: + lockdten = 0; + acqen = 0; + break; + case QAM_64: + case QAM_256: + lockdten = 1; + acqen = 1; + break; + default: + return -EINVAL; + } + + lg_dbg("lockdten = %d, acqen = %d\n", lockdten, acqen); + + /* control agc function */ + switch (state->cfg->demod_chip) { + case LGDT3304: + lgdt3305_write_reg(state, 0x0314, 0xe1 | lockdten << 1); + lgdt3305_set_reg_bit(state, 0x030e, 2, acqen); + break; + case LGDT3305: + lgdt3305_write_reg(state, LGDT3305_AGC_CTRL_4, 0xe1 | lockdten << 1); + lgdt3305_set_reg_bit(state, LGDT3305_AGC_CTRL_1, 2, acqen); + break; + default: + return -EINVAL; + } + + return lgdt3305_rfagc_loop(state, p); +} + +static int lgdt3305_set_agc_power_ref(struct lgdt3305_state *state, + struct dtv_frontend_properties *p) +{ + u16 usref = 0; + + switch (p->modulation) { + case VSB_8: + if (state->cfg->usref_8vsb) + usref = state->cfg->usref_8vsb; + break; + case QAM_64: + if (state->cfg->usref_qam64) + usref = state->cfg->usref_qam64; + break; + case QAM_256: + if (state->cfg->usref_qam256) + usref = state->cfg->usref_qam256; + break; + default: + return -EINVAL; + } + + if (usref) { + lg_dbg("set manual mode: 0x%04x\n", usref); + + lgdt3305_set_reg_bit(state, LGDT3305_AGC_CTRL_1, 3, 1); + + lgdt3305_write_reg(state, LGDT3305_AGC_POWER_REF_1, + 0xff & (usref >> 8)); + lgdt3305_write_reg(state, LGDT3305_AGC_POWER_REF_2, + 0xff & (usref >> 0)); + } + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static int lgdt3305_spectral_inversion(struct lgdt3305_state *state, + struct dtv_frontend_properties *p, + int inversion) +{ + int ret; + + lg_dbg("(%d)\n", inversion); + + switch (p->modulation) { + case VSB_8: + ret = lgdt3305_write_reg(state, LGDT3305_CR_CTRL_7, + inversion ? 0xf9 : 0x79); + break; + case QAM_64: + case QAM_256: + ret = lgdt3305_write_reg(state, LGDT3305_FEC_BLOCK_CTRL, + inversion ? 0xfd : 0xff); + break; + default: + ret = -EINVAL; + } + return ret; +} + +static int lgdt3305_set_if(struct lgdt3305_state *state, + struct dtv_frontend_properties *p) +{ + u16 if_freq_khz; + u8 nco1, nco2, nco3, nco4; + u64 nco; + + switch (p->modulation) { + case VSB_8: + if_freq_khz = state->cfg->vsb_if_khz; + break; + case QAM_64: + case QAM_256: + if_freq_khz = state->cfg->qam_if_khz; + break; + default: + return -EINVAL; + } + + nco = if_freq_khz / 10; + + switch (p->modulation) { + case VSB_8: + nco <<= 24; + do_div(nco, 625); + break; + case QAM_64: + case QAM_256: + nco <<= 28; + do_div(nco, 625); + break; + default: + return -EINVAL; + } + + nco1 = (nco >> 24) & 0x3f; + nco1 |= 0x40; + nco2 = (nco >> 16) & 0xff; + nco3 = (nco >> 8) & 0xff; + nco4 = nco & 0xff; + + lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_1, nco1); + lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_2, nco2); + lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_3, nco3); + lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_4, nco4); + + lg_dbg("%d KHz -> [%02x%02x%02x%02x]\n", + if_freq_khz, nco1, nco2, nco3, nco4); + + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static int lgdt3305_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct lgdt3305_state *state = fe->demodulator_priv; + + if (state->cfg->deny_i2c_rptr) + return 0; + + lg_dbg("(%d)\n", enable); + + return lgdt3305_set_reg_bit(state, LGDT3305_GEN_CTRL_2, 5, + enable ? 0 : 1); +} + +static int lgdt3305_sleep(struct dvb_frontend *fe) +{ + struct lgdt3305_state *state = fe->demodulator_priv; + u8 gen_ctrl_3, gen_ctrl_4; + + lg_dbg("\n"); + + gen_ctrl_3 = read_reg(state, LGDT3305_GEN_CTRL_3); + gen_ctrl_4 = read_reg(state, LGDT3305_GEN_CTRL_4); + + /* hold in software reset while sleeping */ + gen_ctrl_3 &= ~0x01; + /* tristate the IF-AGC pin */ + gen_ctrl_3 |= 0x02; + /* tristate the RF-AGC pin */ + gen_ctrl_3 |= 0x04; + + /* disable vsb/qam module */ + gen_ctrl_4 &= ~0x01; + /* disable adc module */ + gen_ctrl_4 &= ~0x02; + + lgdt3305_write_reg(state, LGDT3305_GEN_CTRL_3, gen_ctrl_3); + lgdt3305_write_reg(state, LGDT3305_GEN_CTRL_4, gen_ctrl_4); + + return 0; +} + +static int lgdt3305_init(struct dvb_frontend *fe) +{ + struct lgdt3305_state *state = fe->demodulator_priv; + int ret; + + static struct lgdt3305_reg lgdt3304_init_data[] = { + { .reg = LGDT3305_GEN_CTRL_1, .val = 0x03, }, + { .reg = 0x000d, .val = 0x02, }, + { .reg = 0x000e, .val = 0x02, }, + { .reg = LGDT3305_DGTL_AGC_REF_1, .val = 0x32, }, + { .reg = LGDT3305_DGTL_AGC_REF_2, .val = 0xc4, }, + { .reg = LGDT3305_CR_CTR_FREQ_1, .val = 0x00, }, + { .reg = LGDT3305_CR_CTR_FREQ_2, .val = 0x00, }, + { .reg = LGDT3305_CR_CTR_FREQ_3, .val = 0x00, }, + { .reg = LGDT3305_CR_CTR_FREQ_4, .val = 0x00, }, + { .reg = LGDT3305_CR_CTRL_7, .val = 0xf9, }, + { .reg = 0x0112, .val = 0x17, }, + { .reg = 0x0113, .val = 0x15, }, + { .reg = 0x0114, .val = 0x18, }, + { .reg = 0x0115, .val = 0xff, }, + { .reg = 0x0116, .val = 0x3c, }, + { .reg = 0x0214, .val = 0x67, }, + { .reg = 0x0424, .val = 0x8d, }, + { .reg = 0x0427, .val = 0x12, }, + { .reg = 0x0428, .val = 0x4f, }, + { .reg = LGDT3305_IFBW_1, .val = 0x80, }, + { .reg = LGDT3305_IFBW_2, .val = 0x00, }, + { .reg = 0x030a, .val = 0x08, }, + { .reg = 0x030b, .val = 0x9b, }, + { .reg = 0x030d, .val = 0x00, }, + { .reg = 0x030e, .val = 0x1c, }, + { .reg = 0x0314, .val = 0xe1, }, + { .reg = 0x000d, .val = 0x82, }, + { .reg = LGDT3305_TP_CTRL_1, .val = 0x5b, }, + { .reg = LGDT3305_TP_CTRL_1, .val = 0x5b, }, + }; + + static struct lgdt3305_reg lgdt3305_init_data[] = { + { .reg = LGDT3305_GEN_CTRL_1, .val = 0x03, }, + { .reg = LGDT3305_GEN_CTRL_2, .val = 0xb0, }, + { .reg = LGDT3305_GEN_CTRL_3, .val = 0x01, }, + { .reg = LGDT3305_GEN_CONTROL, .val = 0x6f, }, + { .reg = LGDT3305_GEN_CTRL_4, .val = 0x03, }, + { .reg = LGDT3305_DGTL_AGC_REF_1, .val = 0x32, }, + { .reg = LGDT3305_DGTL_AGC_REF_2, .val = 0xc4, }, + { .reg = LGDT3305_CR_CTR_FREQ_1, .val = 0x00, }, + { .reg = LGDT3305_CR_CTR_FREQ_2, .val = 0x00, }, + { .reg = LGDT3305_CR_CTR_FREQ_3, .val = 0x00, }, + { .reg = LGDT3305_CR_CTR_FREQ_4, .val = 0x00, }, + { .reg = LGDT3305_CR_CTRL_7, .val = 0x79, }, + { .reg = LGDT3305_AGC_POWER_REF_1, .val = 0x32, }, + { .reg = LGDT3305_AGC_POWER_REF_2, .val = 0xc4, }, + { .reg = LGDT3305_AGC_DELAY_PT_1, .val = 0x0d, }, + { .reg = LGDT3305_AGC_DELAY_PT_2, .val = 0x30, }, + { .reg = LGDT3305_RFAGC_LOOP_FLTR_BW_1, .val = 0x80, }, + { .reg = LGDT3305_RFAGC_LOOP_FLTR_BW_2, .val = 0x00, }, + { .reg = LGDT3305_IFBW_1, .val = 0x80, }, + { .reg = LGDT3305_IFBW_2, .val = 0x00, }, + { .reg = LGDT3305_AGC_CTRL_1, .val = 0x30, }, + { .reg = LGDT3305_AGC_CTRL_4, .val = 0x61, }, + { .reg = LGDT3305_FEC_BLOCK_CTRL, .val = 0xff, }, + { .reg = LGDT3305_TP_CTRL_1, .val = 0x1b, }, + }; + + lg_dbg("\n"); + + switch (state->cfg->demod_chip) { + case LGDT3304: + ret = lgdt3305_write_regs(state, lgdt3304_init_data, + ARRAY_SIZE(lgdt3304_init_data)); + break; + case LGDT3305: + ret = lgdt3305_write_regs(state, lgdt3305_init_data, + ARRAY_SIZE(lgdt3305_init_data)); + break; + default: + ret = -EINVAL; + } + if (lg_fail(ret)) + goto fail; + + ret = lgdt3305_soft_reset(state); +fail: + return ret; +} + +static int lgdt3304_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct lgdt3305_state *state = fe->demodulator_priv; + int ret; + + lg_dbg("(%d, %d)\n", p->frequency, p->modulation); + + if (fe->ops.tuner_ops.set_params) { + ret = fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + if (lg_fail(ret)) + goto fail; + state->current_frequency = p->frequency; + } + + ret = lgdt3305_set_modulation(state, p); + if (lg_fail(ret)) + goto fail; + + ret = lgdt3305_passband_digital_agc(state, p); + if (lg_fail(ret)) + goto fail; + + ret = lgdt3305_agc_setup(state, p); + if (lg_fail(ret)) + goto fail; + + /* reg 0x030d is 3304-only... seen in vsb and qam usbsnoops... */ + switch (p->modulation) { + case VSB_8: + lgdt3305_write_reg(state, 0x030d, 0x00); + lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_1, 0x4f); + lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_2, 0x0c); + lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_3, 0xac); + lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_4, 0xba); + break; + case QAM_64: + case QAM_256: + lgdt3305_write_reg(state, 0x030d, 0x14); + ret = lgdt3305_set_if(state, p); + if (lg_fail(ret)) + goto fail; + break; + default: + return -EINVAL; + } + + + ret = lgdt3305_spectral_inversion(state, p, + state->cfg->spectral_inversion + ? 1 : 0); + if (lg_fail(ret)) + goto fail; + + state->current_modulation = p->modulation; + + ret = lgdt3305_mpeg_mode(state, state->cfg->mpeg_mode); + if (lg_fail(ret)) + goto fail; + + /* lgdt3305_mpeg_mode_polarity calls lgdt3305_soft_reset */ + ret = lgdt3305_mpeg_mode_polarity(state, + state->cfg->tpclk_edge, + state->cfg->tpvalid_polarity); +fail: + return ret; +} + +static int lgdt3305_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct lgdt3305_state *state = fe->demodulator_priv; + int ret; + + lg_dbg("(%d, %d)\n", p->frequency, p->modulation); + + if (fe->ops.tuner_ops.set_params) { + ret = fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + if (lg_fail(ret)) + goto fail; + state->current_frequency = p->frequency; + } + + ret = lgdt3305_set_modulation(state, p); + if (lg_fail(ret)) + goto fail; + + ret = lgdt3305_passband_digital_agc(state, p); + if (lg_fail(ret)) + goto fail; + ret = lgdt3305_set_agc_power_ref(state, p); + if (lg_fail(ret)) + goto fail; + ret = lgdt3305_agc_setup(state, p); + if (lg_fail(ret)) + goto fail; + + /* low if */ + ret = lgdt3305_write_reg(state, LGDT3305_GEN_CONTROL, 0x2f); + if (lg_fail(ret)) + goto fail; + ret = lgdt3305_set_reg_bit(state, LGDT3305_CR_CTR_FREQ_1, 6, 1); + if (lg_fail(ret)) + goto fail; + + ret = lgdt3305_set_if(state, p); + if (lg_fail(ret)) + goto fail; + ret = lgdt3305_spectral_inversion(state, p, + state->cfg->spectral_inversion + ? 1 : 0); + if (lg_fail(ret)) + goto fail; + + ret = lgdt3305_set_filter_extension(state, p); + if (lg_fail(ret)) + goto fail; + + state->current_modulation = p->modulation; + + ret = lgdt3305_mpeg_mode(state, state->cfg->mpeg_mode); + if (lg_fail(ret)) + goto fail; + + /* lgdt3305_mpeg_mode_polarity calls lgdt3305_soft_reset */ + ret = lgdt3305_mpeg_mode_polarity(state, + state->cfg->tpclk_edge, + state->cfg->tpvalid_polarity); +fail: + return ret; +} + +static int lgdt3305_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct lgdt3305_state *state = fe->demodulator_priv; + + lg_dbg("\n"); + + p->modulation = state->current_modulation; + p->frequency = state->current_frequency; + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static int lgdt3305_read_cr_lock_status(struct lgdt3305_state *state, + int *locked) +{ + u8 val; + int ret; + char *cr_lock_state = ""; + + *locked = 0; + + ret = lgdt3305_read_reg(state, LGDT3305_CR_LOCK_STATUS, &val); + if (lg_fail(ret)) + goto fail; + + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + if (val & (1 << 1)) + *locked = 1; + + switch (val & 0x07) { + case 0: + cr_lock_state = "QAM UNLOCK"; + break; + case 4: + cr_lock_state = "QAM 1stLock"; + break; + case 6: + cr_lock_state = "QAM 2ndLock"; + break; + case 7: + cr_lock_state = "QAM FinalLock"; + break; + default: + cr_lock_state = "CLOCKQAM-INVALID!"; + break; + } + break; + case VSB_8: + if (val & (1 << 7)) { + *locked = 1; + cr_lock_state = "CLOCKVSB"; + } + break; + default: + ret = -EINVAL; + } + lg_dbg("(%d) %s\n", *locked, cr_lock_state); +fail: + return ret; +} + +static int lgdt3305_read_fec_lock_status(struct lgdt3305_state *state, + int *locked) +{ + u8 val; + int ret, mpeg_lock, fec_lock, viterbi_lock; + + *locked = 0; + + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + ret = lgdt3305_read_reg(state, + LGDT3305_FEC_LOCK_STATUS, &val); + if (lg_fail(ret)) + goto fail; + + mpeg_lock = (val & (1 << 0)) ? 1 : 0; + fec_lock = (val & (1 << 2)) ? 1 : 0; + viterbi_lock = (val & (1 << 3)) ? 1 : 0; + + *locked = mpeg_lock && fec_lock && viterbi_lock; + + lg_dbg("(%d) %s%s%s\n", *locked, + mpeg_lock ? "mpeg lock " : "", + fec_lock ? "fec lock " : "", + viterbi_lock ? "viterbi lock" : ""); + break; + case VSB_8: + default: + ret = -EINVAL; + } +fail: + return ret; +} + +static int lgdt3305_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct lgdt3305_state *state = fe->demodulator_priv; + u8 val; + int ret, signal, inlock, nofecerr, snrgood, + cr_lock, fec_lock, sync_lock; + + *status = 0; + + ret = lgdt3305_read_reg(state, LGDT3305_GEN_STATUS, &val); + if (lg_fail(ret)) + goto fail; + + signal = (val & (1 << 4)) ? 1 : 0; + inlock = (val & (1 << 3)) ? 0 : 1; + sync_lock = (val & (1 << 2)) ? 1 : 0; + nofecerr = (val & (1 << 1)) ? 1 : 0; + snrgood = (val & (1 << 0)) ? 1 : 0; + + lg_dbg("%s%s%s%s%s\n", + signal ? "SIGNALEXIST " : "", + inlock ? "INLOCK " : "", + sync_lock ? "SYNCLOCK " : "", + nofecerr ? "NOFECERR " : "", + snrgood ? "SNRGOOD " : ""); + + ret = lgdt3305_read_cr_lock_status(state, &cr_lock); + if (lg_fail(ret)) + goto fail; + + if (signal) + *status |= FE_HAS_SIGNAL; + if (cr_lock) + *status |= FE_HAS_CARRIER; + if (nofecerr) + *status |= FE_HAS_VITERBI; + if (sync_lock) + *status |= FE_HAS_SYNC; + + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* signal bit is unreliable on the DT3304 in QAM mode */ + if (((LGDT3304 == state->cfg->demod_chip)) && (cr_lock)) + *status |= FE_HAS_SIGNAL; + + ret = lgdt3305_read_fec_lock_status(state, &fec_lock); + if (lg_fail(ret)) + goto fail; + + if (fec_lock) + *status |= FE_HAS_LOCK; + break; + case VSB_8: + if (inlock) + *status |= FE_HAS_LOCK; + break; + default: + ret = -EINVAL; + } +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +/* borrowed from lgdt330x.c */ +static u32 calculate_snr(u32 mse, u32 c) +{ + if (mse == 0) /* no signal */ + return 0; + + mse = intlog10(mse); + if (mse > c) { + /* Negative SNR, which is possible, but realisticly the + demod will lose lock before the signal gets this bad. The + API only allows for unsigned values, so just return 0 */ + return 0; + } + return 10*(c - mse); +} + +static int lgdt3305_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct lgdt3305_state *state = fe->demodulator_priv; + u32 noise; /* noise value */ + u32 c; /* per-modulation SNR calculation constant */ + + switch (state->current_modulation) { + case VSB_8: +#ifdef USE_PTMSE + /* Use Phase Tracker Mean-Square Error Register */ + /* SNR for ranges from -13.11 to +44.08 */ + noise = ((read_reg(state, LGDT3305_PT_MSE_1) & 0x07) << 16) | + (read_reg(state, LGDT3305_PT_MSE_2) << 8) | + (read_reg(state, LGDT3305_PT_MSE_3) & 0xff); + c = 73957994; /* log10(25*32^2)*2^24 */ +#else + /* Use Equalizer Mean-Square Error Register */ + /* SNR for ranges from -16.12 to +44.08 */ + noise = ((read_reg(state, LGDT3305_EQ_MSE_1) & 0x0f) << 16) | + (read_reg(state, LGDT3305_EQ_MSE_2) << 8) | + (read_reg(state, LGDT3305_EQ_MSE_3) & 0xff); + c = 73957994; /* log10(25*32^2)*2^24 */ +#endif + break; + case QAM_64: + case QAM_256: + noise = (read_reg(state, LGDT3305_CR_MSE_1) << 8) | + (read_reg(state, LGDT3305_CR_MSE_2) & 0xff); + + c = (state->current_modulation == QAM_64) ? + 97939837 : 98026066; + /* log10(688128)*2^24 and log10(696320)*2^24 */ + break; + default: + return -EINVAL; + } + state->snr = calculate_snr(noise, c); + /* report SNR in dB * 10 */ + *snr = (state->snr / ((1 << 24) / 10)); + lg_dbg("noise = 0x%08x, snr = %d.%02d dB\n", noise, + state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16); + + return 0; +} + +static int lgdt3305_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + /* borrowed from lgdt330x.c + * + * Calculate strength from SNR up to 35dB + * Even though the SNR can go higher than 35dB, + * there is some comfort factor in having a range of + * strong signals that can show at 100% + */ + struct lgdt3305_state *state = fe->demodulator_priv; + u16 snr; + int ret; + + *strength = 0; + + ret = fe->ops.read_snr(fe, &snr); + if (lg_fail(ret)) + goto fail; + /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */ + /* scale the range 0 - 35*2^24 into 0 - 65535 */ + if (state->snr >= 8960 * 0x10000) + *strength = 0xffff; + else + *strength = state->snr / 8960; +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int lgdt3305_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + return 0; +} + +static int lgdt3305_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct lgdt3305_state *state = fe->demodulator_priv; + + *ucblocks = + (read_reg(state, LGDT3305_FEC_PKT_ERR_1) << 8) | + (read_reg(state, LGDT3305_FEC_PKT_ERR_2) & 0xff); + + return 0; +} + +static int lgdt3305_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings + *fe_tune_settings) +{ + fe_tune_settings->min_delay_ms = 500; + lg_dbg("\n"); + return 0; +} + +static void lgdt3305_release(struct dvb_frontend *fe) +{ + struct lgdt3305_state *state = fe->demodulator_priv; + lg_dbg("\n"); + kfree(state); +} + +static struct dvb_frontend_ops lgdt3304_ops; +static struct dvb_frontend_ops lgdt3305_ops; + +struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config, + struct i2c_adapter *i2c_adap) +{ + struct lgdt3305_state *state = NULL; + int ret; + u8 val; + + lg_dbg("(%d-%04x)\n", + i2c_adap ? i2c_adapter_id(i2c_adap) : 0, + config ? config->i2c_addr : 0); + + state = kzalloc(sizeof(struct lgdt3305_state), GFP_KERNEL); + if (state == NULL) + goto fail; + + state->cfg = config; + state->i2c_adap = i2c_adap; + + switch (config->demod_chip) { + case LGDT3304: + memcpy(&state->frontend.ops, &lgdt3304_ops, + sizeof(struct dvb_frontend_ops)); + break; + case LGDT3305: + memcpy(&state->frontend.ops, &lgdt3305_ops, + sizeof(struct dvb_frontend_ops)); + break; + default: + goto fail; + } + state->frontend.demodulator_priv = state; + + /* verify that we're talking to a lg dt3304/5 */ + ret = lgdt3305_read_reg(state, LGDT3305_GEN_CTRL_2, &val); + if ((lg_fail(ret)) | (val == 0)) + goto fail; + ret = lgdt3305_write_reg(state, 0x0808, 0x80); + if (lg_fail(ret)) + goto fail; + ret = lgdt3305_read_reg(state, 0x0808, &val); + if ((lg_fail(ret)) | (val != 0x80)) + goto fail; + ret = lgdt3305_write_reg(state, 0x0808, 0x00); + if (lg_fail(ret)) + goto fail; + + state->current_frequency = -1; + state->current_modulation = -1; + + return &state->frontend; +fail: + lg_warn("unable to detect %s hardware\n", + config->demod_chip ? "LGDT3304" : "LGDT3305"); + kfree(state); + return NULL; +} +EXPORT_SYMBOL(lgdt3305_attach); + +static struct dvb_frontend_ops lgdt3304_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "LG Electronics LGDT3304 VSB/QAM Frontend", + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .i2c_gate_ctrl = lgdt3305_i2c_gate_ctrl, + .init = lgdt3305_init, + .set_frontend = lgdt3304_set_parameters, + .get_frontend = lgdt3305_get_frontend, + .get_tune_settings = lgdt3305_get_tune_settings, + .read_status = lgdt3305_read_status, + .read_ber = lgdt3305_read_ber, + .read_signal_strength = lgdt3305_read_signal_strength, + .read_snr = lgdt3305_read_snr, + .read_ucblocks = lgdt3305_read_ucblocks, + .release = lgdt3305_release, +}; + +static struct dvb_frontend_ops lgdt3305_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "LG Electronics LGDT3305 VSB/QAM Frontend", + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .i2c_gate_ctrl = lgdt3305_i2c_gate_ctrl, + .init = lgdt3305_init, + .sleep = lgdt3305_sleep, + .set_frontend = lgdt3305_set_parameters, + .get_frontend = lgdt3305_get_frontend, + .get_tune_settings = lgdt3305_get_tune_settings, + .read_status = lgdt3305_read_status, + .read_ber = lgdt3305_read_ber, + .read_signal_strength = lgdt3305_read_signal_strength, + .read_snr = lgdt3305_read_snr, + .read_ucblocks = lgdt3305_read_ucblocks, + .release = lgdt3305_release, +}; + +MODULE_DESCRIPTION("LG Electronics LGDT3304/5 ATSC/QAM-B Demodulator Driver"); +MODULE_AUTHOR("Michael Krufky "); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.2"); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb-frontends/lgdt3305.h b/drivers/media/dvb-frontends/lgdt3305.h new file mode 100644 index 00000000..d9ab556c --- /dev/null +++ b/drivers/media/dvb-frontends/lgdt3305.h @@ -0,0 +1,91 @@ +/* + * Support for LG Electronics LGDT3304 and LGDT3305 - VSB/QAM + * + * Copyright (C) 2008, 2009, 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _LGDT3305_H_ +#define _LGDT3305_H_ + +#include +#include +#include "dvb_frontend.h" + + +enum lgdt3305_mpeg_mode { + LGDT3305_MPEG_PARALLEL = 0, + LGDT3305_MPEG_SERIAL = 1, +}; + +enum lgdt3305_tp_clock_edge { + LGDT3305_TPCLK_RISING_EDGE = 0, + LGDT3305_TPCLK_FALLING_EDGE = 1, +}; + +enum lgdt3305_tp_valid_polarity { + LGDT3305_TP_VALID_LOW = 0, + LGDT3305_TP_VALID_HIGH = 1, +}; + +enum lgdt_demod_chip_type { + LGDT3305 = 0, + LGDT3304 = 1, +}; + +struct lgdt3305_config { + u8 i2c_addr; + + /* user defined IF frequency in KHz */ + u16 qam_if_khz; + u16 vsb_if_khz; + + /* AGC Power reference - defaults are used if left unset */ + u16 usref_8vsb; /* default: 0x32c4 */ + u16 usref_qam64; /* default: 0x5400 */ + u16 usref_qam256; /* default: 0x2a80 */ + + /* disable i2c repeater - 0:repeater enabled 1:repeater disabled */ + unsigned int deny_i2c_rptr:1; + + /* spectral inversion - 0:disabled 1:enabled */ + unsigned int spectral_inversion:1; + + /* use RF AGC loop - 0:disabled 1:enabled */ + unsigned int rf_agc_loop:1; + + enum lgdt3305_mpeg_mode mpeg_mode; + enum lgdt3305_tp_clock_edge tpclk_edge; + enum lgdt3305_tp_valid_polarity tpvalid_polarity; + enum lgdt_demod_chip_type demod_chip; +}; + +#if IS_ENABLED(CONFIG_DVB_LGDT3305) +extern +struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config, + struct i2c_adapter *i2c_adap); +#else +static inline +struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config, + struct i2c_adapter *i2c_adap) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_LGDT3305 */ + +#endif /* _LGDT3305_H_ */ diff --git a/drivers/media/dvb-frontends/lgdt330x.c b/drivers/media/dvb-frontends/lgdt330x.c new file mode 100644 index 00000000..e046622d --- /dev/null +++ b/drivers/media/dvb-frontends/lgdt330x.c @@ -0,0 +1,831 @@ +/* + * Support for LGDT3302 and LGDT3303 - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * NOTES ABOUT THIS DRIVER + * + * This Linux driver supports: + * DViCO FusionHDTV 3 Gold-Q + * DViCO FusionHDTV 3 Gold-T + * DViCO FusionHDTV 5 Gold + * DViCO FusionHDTV 5 Lite + * DViCO FusionHDTV 5 USB Gold + * Air2PC/AirStar 2 ATSC 3rd generation (HD5000) + * pcHDTV HD5500 + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "lgdt330x_priv.h" +#include "lgdt330x.h" + +/* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */ +/* #define USE_EQMSE */ + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off)."); +#define dprintk(args...) \ +do { \ +if (debug) printk(KERN_DEBUG "lgdt330x: " args); \ +} while (0) + +struct lgdt330x_state +{ + struct i2c_adapter* i2c; + + /* Configuration settings */ + const struct lgdt330x_config* config; + + struct dvb_frontend frontend; + + /* Demodulator private data */ + fe_modulation_t current_modulation; + u32 snr; /* Result of last SNR calculation */ + + /* Tuner private data */ + u32 current_frequency; +}; + +static int i2c_write_demod_bytes (struct lgdt330x_state* state, + u8 *buf, /* data bytes to send */ + int len /* number of bytes to send */ ) +{ + struct i2c_msg msg = + { .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 }; + int i; + int err; + + for (i=0; ii2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __func__, msg.buf[0], msg.buf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + msg.buf += 2; + } + return 0; +} + +/* + * This routine writes the register (reg) to the demod bus + * then reads the data returned for (len) bytes. + */ + +static int i2c_read_demod_bytes(struct lgdt330x_state *state, + enum I2C_REG reg, u8 *buf, int len) +{ + u8 wr [] = { reg }; + struct i2c_msg msg [] = { + { .addr = state->config->demod_address, + .flags = 0, .buf = wr, .len = 1 }, + { .addr = state->config->demod_address, + .flags = I2C_M_RD, .buf = buf, .len = len }, + }; + int ret; + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __func__, state->config->demod_address, reg, ret); + if (ret >= 0) + ret = -EIO; + } else { + ret = 0; + } + return ret; +} + +/* Software reset */ +static int lgdt3302_SwReset(struct lgdt330x_state* state) +{ + u8 ret; + u8 reset[] = { + IRQ_MASK, + 0x00 /* bit 6 is active low software reset + * bits 5-0 are 1 to mask interrupts */ + }; + + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + if (ret == 0) { + + /* force reset high (inactive) and unmask interrupts */ + reset[1] = 0x7f; + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + } + return ret; +} + +static int lgdt3303_SwReset(struct lgdt330x_state* state) +{ + u8 ret; + u8 reset[] = { + 0x02, + 0x00 /* bit 0 is active low software reset */ + }; + + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + if (ret == 0) { + + /* force reset high (inactive) */ + reset[1] = 0x01; + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + } + return ret; +} + +static int lgdt330x_SwReset(struct lgdt330x_state* state) +{ + switch (state->config->demod_chip) { + case LGDT3302: + return lgdt3302_SwReset(state); + case LGDT3303: + return lgdt3303_SwReset(state); + default: + return -ENODEV; + } +} + +static int lgdt330x_init(struct dvb_frontend* fe) +{ + /* Hardware reset is done using gpio[0] of cx23880x chip. + * I'd like to do it here, but don't know how to find chip address. + * cx88-cards.c arranges for the reset bit to be inactive (high). + * Maybe there needs to be a callable function in cx88-core or + * the caller of this function needs to do it. */ + + /* + * Array of byte pairs + * to initialize each different chip + */ + static u8 lgdt3302_init_data[] = { + /* Use 50MHz parameter values from spec sheet since xtal is 50 */ + /* Change the value of NCOCTFV[25:0] of carrier + recovery center frequency register */ + VSB_CARRIER_FREQ0, 0x00, + VSB_CARRIER_FREQ1, 0x87, + VSB_CARRIER_FREQ2, 0x8e, + VSB_CARRIER_FREQ3, 0x01, + /* Change the TPCLK pin polarity + data is valid on falling clock */ + DEMUX_CONTROL, 0xfb, + /* Change the value of IFBW[11:0] of + AGC IF/RF loop filter bandwidth register */ + AGC_RF_BANDWIDTH0, 0x40, + AGC_RF_BANDWIDTH1, 0x93, + AGC_RF_BANDWIDTH2, 0x00, + /* Change the value of bit 6, 'nINAGCBY' and + 'NSSEL[1:0] of ACG function control register 2 */ + AGC_FUNC_CTRL2, 0xc6, + /* Change the value of bit 6 'RFFIX' + of AGC function control register 3 */ + AGC_FUNC_CTRL3, 0x40, + /* Set the value of 'INLVTHD' register 0x2a/0x2c + to 0x7fe */ + AGC_DELAY0, 0x07, + AGC_DELAY2, 0xfe, + /* Change the value of IAGCBW[15:8] + of inner AGC loop filter bandwidth */ + AGC_LOOP_BANDWIDTH0, 0x08, + AGC_LOOP_BANDWIDTH1, 0x9a + }; + + static u8 lgdt3303_init_data[] = { + 0x4c, 0x14 + }; + + static u8 flip_1_lgdt3303_init_data[] = { + 0x4c, 0x14, + 0x87, 0xf3 + }; + + static u8 flip_2_lgdt3303_init_data[] = { + 0x4c, 0x14, + 0x87, 0xda + }; + + struct lgdt330x_state* state = fe->demodulator_priv; + char *chip_name; + int err; + + switch (state->config->demod_chip) { + case LGDT3302: + chip_name = "LGDT3302"; + err = i2c_write_demod_bytes(state, lgdt3302_init_data, + sizeof(lgdt3302_init_data)); + break; + case LGDT3303: + chip_name = "LGDT3303"; + switch (state->config->clock_polarity_flip) { + case 2: + err = i2c_write_demod_bytes(state, + flip_2_lgdt3303_init_data, + sizeof(flip_2_lgdt3303_init_data)); + break; + case 1: + err = i2c_write_demod_bytes(state, + flip_1_lgdt3303_init_data, + sizeof(flip_1_lgdt3303_init_data)); + break; + case 0: + default: + err = i2c_write_demod_bytes(state, lgdt3303_init_data, + sizeof(lgdt3303_init_data)); + } + break; + default: + chip_name = "undefined"; + printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n"); + err = -ENODEV; + } + dprintk("%s entered as %s\n", __func__, chip_name); + if (err < 0) + return err; + return lgdt330x_SwReset(state); +} + +static int lgdt330x_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = 0; /* Not supplied by the demod chips */ + return 0; +} + +static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct lgdt330x_state* state = fe->demodulator_priv; + int err; + u8 buf[2]; + + *ucblocks = 0; + + switch (state->config->demod_chip) { + case LGDT3302: + err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1, + buf, sizeof(buf)); + break; + case LGDT3303: + err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1, + buf, sizeof(buf)); + break; + default: + printk(KERN_WARNING + "Only LGDT3302 and LGDT3303 are supported chips.\n"); + err = -ENODEV; + } + if (err < 0) + return err; + + *ucblocks = (buf[0] << 8) | buf[1]; + return 0; +} + +static int lgdt330x_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + /* + * Array of byte pairs + * to initialize 8VSB for lgdt3303 chip 50 MHz IF + */ + static u8 lgdt3303_8vsb_44_data[] = { + 0x04, 0x00, + 0x0d, 0x40, + 0x0e, 0x87, + 0x0f, 0x8e, + 0x10, 0x01, + 0x47, 0x8b }; + + /* + * Array of byte pairs + * to initialize QAM for lgdt3303 chip + */ + static u8 lgdt3303_qam_data[] = { + 0x04, 0x00, + 0x0d, 0x00, + 0x0e, 0x00, + 0x0f, 0x00, + 0x10, 0x00, + 0x51, 0x63, + 0x47, 0x66, + 0x48, 0x66, + 0x4d, 0x1a, + 0x49, 0x08, + 0x4a, 0x9b }; + + struct lgdt330x_state* state = fe->demodulator_priv; + + static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 }; + + int err = 0; + /* Change only if we are actually changing the modulation */ + if (state->current_modulation != p->modulation) { + switch (p->modulation) { + case VSB_8: + dprintk("%s: VSB_8 MODE\n", __func__); + + /* Select VSB mode */ + top_ctrl_cfg[1] = 0x03; + + /* Select ANT connector if supported by card */ + if (state->config->pll_rf_set) + state->config->pll_rf_set(fe, 1); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data, + sizeof(lgdt3303_8vsb_44_data)); + } + break; + + case QAM_64: + dprintk("%s: QAM_64 MODE\n", __func__); + + /* Select QAM_64 mode */ + top_ctrl_cfg[1] = 0x00; + + /* Select CABLE connector if supported by card */ + if (state->config->pll_rf_set) + state->config->pll_rf_set(fe, 0); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_qam_data, + sizeof(lgdt3303_qam_data)); + } + break; + + case QAM_256: + dprintk("%s: QAM_256 MODE\n", __func__); + + /* Select QAM_256 mode */ + top_ctrl_cfg[1] = 0x01; + + /* Select CABLE connector if supported by card */ + if (state->config->pll_rf_set) + state->config->pll_rf_set(fe, 0); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_qam_data, + sizeof(lgdt3303_qam_data)); + } + break; + default: + printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __func__, p->modulation); + return -1; + } + if (err < 0) + printk(KERN_WARNING "lgdt330x: %s: error blasting " + "bytes to lgdt3303 for modulation type(%d)\n", + __func__, p->modulation); + + /* + * select serial or parallel MPEG harware interface + * Serial: 0x04 for LGDT3302 or 0x40 for LGDT3303 + * Parallel: 0x00 + */ + top_ctrl_cfg[1] |= state->config->serial_mpeg; + + /* Select the requested mode */ + i2c_write_demod_bytes(state, top_ctrl_cfg, + sizeof(top_ctrl_cfg)); + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + state->current_modulation = p->modulation; + } + + /* Tune to the specified frequency */ + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* Keep track of the new frequency */ + /* FIXME this is the wrong way to do this... */ + /* The tuner is shared with the video4linux analog API */ + state->current_frequency = p->frequency; + + lgdt330x_SwReset(state); + return 0; +} + +static int lgdt330x_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct lgdt330x_state *state = fe->demodulator_priv; + p->frequency = state->current_frequency; + return 0; +} + +static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct lgdt330x_state* state = fe->demodulator_priv; + u8 buf[3]; + + *status = 0; /* Reset status result */ + + /* AGC status register */ + i2c_read_demod_bytes(state, AGC_STATUS, buf, 1); + dprintk("%s: AGC_STATUS = 0x%02x\n", __func__, buf[0]); + if ((buf[0] & 0x0c) == 0x8){ + /* Test signal does not exist flag */ + /* as well as the AGC lock flag. */ + *status |= FE_HAS_SIGNAL; + } + + /* + * You must set the Mask bits to 1 in the IRQ_MASK in order + * to see that status bit in the IRQ_STATUS register. + * This is done in SwReset(); + */ + /* signal status */ + i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf)); + dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __func__, buf[0], buf[1], buf[2]); + + + /* sync status */ + if ((buf[2] & 0x03) == 0x01) { + *status |= FE_HAS_SYNC; + } + + /* FEC error status */ + if ((buf[2] & 0x0c) == 0x08) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + } + + /* Carrier Recovery Lock Status Register */ + i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __func__, buf[0]); + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* Need to understand why there are 3 lock levels here */ + if ((buf[0] & 0x07) == 0x07) + *status |= FE_HAS_CARRIER; + break; + case VSB_8: + if ((buf[0] & 0x80) == 0x80) + *status |= FE_HAS_CARRIER; + break; + default: + printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __func__); + } + + return 0; +} + +static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct lgdt330x_state* state = fe->demodulator_priv; + int err; + u8 buf[3]; + + *status = 0; /* Reset status result */ + + /* lgdt3303 AGC status register */ + err = i2c_read_demod_bytes(state, 0x58, buf, 1); + if (err < 0) + return err; + + dprintk("%s: AGC_STATUS = 0x%02x\n", __func__, buf[0]); + if ((buf[0] & 0x21) == 0x01){ + /* Test input signal does not exist flag */ + /* as well as the AGC lock flag. */ + *status |= FE_HAS_SIGNAL; + } + + /* Carrier Recovery Lock Status Register */ + i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __func__, buf[0]); + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* Need to understand why there are 3 lock levels here */ + if ((buf[0] & 0x07) == 0x07) + *status |= FE_HAS_CARRIER; + else + break; + i2c_read_demod_bytes(state, 0x8a, buf, 1); + if ((buf[0] & 0x04) == 0x04) + *status |= FE_HAS_SYNC; + if ((buf[0] & 0x01) == 0x01) + *status |= FE_HAS_LOCK; + if ((buf[0] & 0x08) == 0x08) + *status |= FE_HAS_VITERBI; + break; + case VSB_8: + if ((buf[0] & 0x80) == 0x80) + *status |= FE_HAS_CARRIER; + else + break; + i2c_read_demod_bytes(state, 0x38, buf, 1); + if ((buf[0] & 0x02) == 0x00) + *status |= FE_HAS_SYNC; + if ((buf[0] & 0x01) == 0x01) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + } + break; + default: + printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __func__); + } + return 0; +} + +/* Calculate SNR estimation (scaled by 2^24) + + 8-VSB SNR equations from LGDT3302 and LGDT3303 datasheets, QAM + equations from LGDT3303 datasheet. VSB is the same between the '02 + and '03, so maybe QAM is too? Perhaps someone with a newer datasheet + that has QAM information could verify? + + For 8-VSB: (two ways, take your pick) + LGDT3302: + SNR_EQ = 10 * log10(25 * 24^2 / EQ_MSE) + LGDT3303: + SNR_EQ = 10 * log10(25 * 32^2 / EQ_MSE) + LGDT3302 & LGDT3303: + SNR_PT = 10 * log10(25 * 32^2 / PT_MSE) (we use this one) + For 64-QAM: + SNR = 10 * log10( 688128 / MSEQAM) + For 256-QAM: + SNR = 10 * log10( 696320 / MSEQAM) + + We re-write the snr equation as: + SNR * 2^24 = 10*(c - intlog10(MSE)) + Where for 256-QAM, c = log10(696320) * 2^24, and so on. */ + +static u32 calculate_snr(u32 mse, u32 c) +{ + if (mse == 0) /* No signal */ + return 0; + + mse = intlog10(mse); + if (mse > c) { + /* Negative SNR, which is possible, but realisticly the + demod will lose lock before the signal gets this bad. The + API only allows for unsigned values, so just return 0 */ + return 0; + } + return 10*(c - mse); +} + +static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + u8 buf[5]; /* read data buffer */ + u32 noise; /* noise value */ + u32 c; /* per-modulation SNR calculation constant */ + + switch(state->current_modulation) { + case VSB_8: + i2c_read_demod_bytes(state, LGDT3302_EQPH_ERR0, buf, 5); +#ifdef USE_EQMSE + /* Use Equalizer Mean-Square Error Register */ + /* SNR for ranges from -15.61 to +41.58 */ + noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2]; + c = 69765745; /* log10(25*24^2)*2^24 */ +#else + /* Use Phase Tracker Mean-Square Error Register */ + /* SNR for ranges from -13.11 to +44.08 */ + noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + c = 73957994; /* log10(25*32^2)*2^24 */ +#endif + break; + case QAM_64: + case QAM_256: + i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2); + noise = ((buf[0] & 3) << 8) | buf[1]; + c = state->current_modulation == QAM_64 ? 97939837 : 98026066; + /* log10(688128)*2^24 and log10(696320)*2^24 */ + break; + default: + printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n", + __func__); + return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */ + } + + state->snr = calculate_snr(noise, c); + *snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */ + + dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise, + state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); + + return 0; +} + +static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + u8 buf[5]; /* read data buffer */ + u32 noise; /* noise value */ + u32 c; /* per-modulation SNR calculation constant */ + + switch(state->current_modulation) { + case VSB_8: + i2c_read_demod_bytes(state, LGDT3303_EQPH_ERR0, buf, 5); +#ifdef USE_EQMSE + /* Use Equalizer Mean-Square Error Register */ + /* SNR for ranges from -16.12 to +44.08 */ + noise = ((buf[0] & 0x78) << 13) | (buf[1] << 8) | buf[2]; + c = 73957994; /* log10(25*32^2)*2^24 */ +#else + /* Use Phase Tracker Mean-Square Error Register */ + /* SNR for ranges from -13.11 to +44.08 */ + noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4]; + c = 73957994; /* log10(25*32^2)*2^24 */ +#endif + break; + case QAM_64: + case QAM_256: + i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2); + noise = (buf[0] << 8) | buf[1]; + c = state->current_modulation == QAM_64 ? 97939837 : 98026066; + /* log10(688128)*2^24 and log10(696320)*2^24 */ + break; + default: + printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n", + __func__); + return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */ + } + + state->snr = calculate_snr(noise, c); + *snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */ + + dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise, + state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16); + + return 0; +} + +static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + /* Calculate Strength from SNR up to 35dB */ + /* Even though the SNR can go higher than 35dB, there is some comfort */ + /* factor in having a range of strong signals that can show at 100% */ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + u16 snr; + int ret; + + ret = fe->ops.read_snr(fe, &snr); + if (ret != 0) + return ret; + /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */ + /* scale the range 0 - 35*2^24 into 0 - 65535 */ + if (state->snr >= 8960 * 0x10000) + *strength = 0xffff; + else + *strength = state->snr / 8960; + + return 0; +} + +static int lgdt330x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) +{ + /* I have no idea about this - it may not be needed */ + fe_tune_settings->min_delay_ms = 500; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + return 0; +} + +static void lgdt330x_release(struct dvb_frontend* fe) +{ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops lgdt3302_ops; +static struct dvb_frontend_ops lgdt3303_ops; + +struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, + struct i2c_adapter* i2c) +{ + struct lgdt330x_state* state = NULL; + u8 buf[1]; + + /* Allocate memory for the internal state */ + state = kzalloc(sizeof(struct lgdt330x_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + + /* Create dvb_frontend */ + switch (config->demod_chip) { + case LGDT3302: + memcpy(&state->frontend.ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops)); + break; + case LGDT3303: + memcpy(&state->frontend.ops, &lgdt3303_ops, sizeof(struct dvb_frontend_ops)); + break; + default: + goto error; + } + state->frontend.demodulator_priv = state; + + /* Verify communication with demod chip */ + if (i2c_read_demod_bytes(state, 2, buf, 1)) + goto error; + + state->current_frequency = -1; + state->current_modulation = -1; + + return &state->frontend; + +error: + kfree(state); + dprintk("%s: ERROR\n",__func__); + return NULL; +} + +static struct dvb_frontend_ops lgdt3302_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name= "LG Electronics LGDT3302 VSB/QAM Frontend", + .frequency_min= 54000000, + .frequency_max= 858000000, + .frequency_stepsize= 62500, + .symbol_rate_min = 5056941, /* QAM 64 */ + .symbol_rate_max = 10762000, /* VSB 8 */ + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .init = lgdt330x_init, + .set_frontend = lgdt330x_set_parameters, + .get_frontend = lgdt330x_get_frontend, + .get_tune_settings = lgdt330x_get_tune_settings, + .read_status = lgdt3302_read_status, + .read_ber = lgdt330x_read_ber, + .read_signal_strength = lgdt330x_read_signal_strength, + .read_snr = lgdt3302_read_snr, + .read_ucblocks = lgdt330x_read_ucblocks, + .release = lgdt330x_release, +}; + +static struct dvb_frontend_ops lgdt3303_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name= "LG Electronics LGDT3303 VSB/QAM Frontend", + .frequency_min= 54000000, + .frequency_max= 858000000, + .frequency_stepsize= 62500, + .symbol_rate_min = 5056941, /* QAM 64 */ + .symbol_rate_max = 10762000, /* VSB 8 */ + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .init = lgdt330x_init, + .set_frontend = lgdt330x_set_parameters, + .get_frontend = lgdt330x_get_frontend, + .get_tune_settings = lgdt330x_get_tune_settings, + .read_status = lgdt3303_read_status, + .read_ber = lgdt330x_read_ber, + .read_signal_strength = lgdt330x_read_signal_strength, + .read_snr = lgdt3303_read_snr, + .read_ucblocks = lgdt330x_read_ucblocks, + .release = lgdt330x_release, +}; + +MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); +MODULE_AUTHOR("Wilson Michaels"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(lgdt330x_attach); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb-frontends/lgdt330x.h b/drivers/media/dvb-frontends/lgdt330x.h new file mode 100644 index 00000000..ca0eab56 --- /dev/null +++ b/drivers/media/dvb-frontends/lgdt330x.h @@ -0,0 +1,73 @@ +/* + * Support for LGDT3302 and LGDT3303 - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef LGDT330X_H +#define LGDT330X_H + +#include + +typedef enum lg_chip_t { + UNDEFINED, + LGDT3302, + LGDT3303 +}lg_chip_type; + +struct lgdt330x_config +{ + /* The demodulator's i2c address */ + u8 demod_address; + + /* LG demodulator chip LGDT3302 or LGDT3303 */ + lg_chip_type demod_chip; + + /* MPEG hardware interface - 0:parallel 1:serial */ + int serial_mpeg; + + /* PLL interface */ + int (*pll_rf_set) (struct dvb_frontend* fe, int index); + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); + + /* Flip the polarity of the mpeg data transfer clock using alternate init data + * This option applies ONLY to LGDT3303 - 0:disabled (default) 1:enabled */ + int clock_polarity_flip; +}; + +#if IS_ENABLED(CONFIG_DVB_LGDT330X) +extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_LGDT330X + +#endif /* LGDT330X_H */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb-frontends/lgdt330x_priv.h b/drivers/media/dvb-frontends/lgdt330x_priv.h new file mode 100644 index 00000000..38c76695 --- /dev/null +++ b/drivers/media/dvb-frontends/lgdt330x_priv.h @@ -0,0 +1,77 @@ +/* + * Support for LGDT3302 and LGDT3303 - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _LGDT330X_PRIV_ +#define _LGDT330X_PRIV_ + +/* i2c control register addresses */ +enum I2C_REG { + TOP_CONTROL= 0x00, + IRQ_MASK= 0x01, + IRQ_STATUS= 0x02, + VSB_CARRIER_FREQ0= 0x16, + VSB_CARRIER_FREQ1= 0x17, + VSB_CARRIER_FREQ2= 0x18, + VSB_CARRIER_FREQ3= 0x19, + CARRIER_MSEQAM1= 0x1a, + CARRIER_MSEQAM2= 0x1b, + CARRIER_LOCK= 0x1c, + TIMING_RECOVERY= 0x1d, + AGC_DELAY0= 0x2a, + AGC_DELAY1= 0x2b, + AGC_DELAY2= 0x2c, + AGC_RF_BANDWIDTH0= 0x2d, + AGC_RF_BANDWIDTH1= 0x2e, + AGC_RF_BANDWIDTH2= 0x2f, + AGC_LOOP_BANDWIDTH0= 0x30, + AGC_LOOP_BANDWIDTH1= 0x31, + AGC_FUNC_CTRL1= 0x32, + AGC_FUNC_CTRL2= 0x33, + AGC_FUNC_CTRL3= 0x34, + AGC_RFIF_ACC0= 0x39, + AGC_RFIF_ACC1= 0x3a, + AGC_RFIF_ACC2= 0x3b, + AGC_STATUS= 0x3f, + SYNC_STATUS_VSB= 0x43, + DEMUX_CONTROL= 0x66, + LGDT3302_EQPH_ERR0= 0x47, + LGDT3302_EQ_ERR1= 0x48, + LGDT3302_EQ_ERR2= 0x49, + LGDT3302_PH_ERR1= 0x4a, + LGDT3302_PH_ERR2= 0x4b, + LGDT3302_PACKET_ERR_COUNTER1= 0x6a, + LGDT3302_PACKET_ERR_COUNTER2= 0x6b, + LGDT3303_EQPH_ERR0= 0x6e, + LGDT3303_EQ_ERR1= 0x6f, + LGDT3303_EQ_ERR2= 0x70, + LGDT3303_PH_ERR1= 0x71, + LGDT3303_PH_ERR2= 0x72, + LGDT3303_PACKET_ERR_COUNTER1= 0x8b, + LGDT3303_PACKET_ERR_COUNTER2= 0x8c, +}; + +#endif /* _LGDT330X_PRIV_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb-frontends/lgs8gl5.c b/drivers/media/dvb-frontends/lgs8gl5.c new file mode 100644 index 00000000..416cce3f --- /dev/null +++ b/drivers/media/dvb-frontends/lgs8gl5.c @@ -0,0 +1,453 @@ +/* + Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver + + Copyright (C) 2008 Sirius International (Hong Kong) Limited + Timothy Lee + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "lgs8gl5.h" + + +#define REG_RESET 0x02 +#define REG_RESET_OFF 0x01 +#define REG_03 0x03 +#define REG_04 0x04 +#define REG_07 0x07 +#define REG_09 0x09 +#define REG_0A 0x0a +#define REG_0B 0x0b +#define REG_0C 0x0c +#define REG_37 0x37 +#define REG_STRENGTH 0x4b +#define REG_STRENGTH_MASK 0x7f +#define REG_STRENGTH_CARRIER 0x80 +#define REG_INVERSION 0x7c +#define REG_INVERSION_ON 0x80 +#define REG_7D 0x7d +#define REG_7E 0x7e +#define REG_A2 0xa2 +#define REG_STATUS 0xa4 +#define REG_STATUS_SYNC 0x04 +#define REG_STATUS_LOCK 0x01 + + +struct lgs8gl5_state { + struct i2c_adapter *i2c; + const struct lgs8gl5_config *config; + struct dvb_frontend frontend; +}; + + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "lgs8gl5: " args); \ + } while (0) + + +/* Writes into demod's register */ +static int +lgs8gl5_write_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = {reg, data}; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: error (reg=0x%02x, val=0x%02x, ret=%i)\n", + __func__, reg, data, ret); + return (ret != 1) ? -1 : 0; +} + + +/* Reads from demod's register */ +static int +lgs8gl5_read_reg(struct lgs8gl5_state *state, u8 reg) +{ + int ret; + u8 b0[] = {reg}; + u8 b1[] = {0}; + struct i2c_msg msg[2] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, + { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) + return -EIO; + + return b1[0]; +} + + +static int +lgs8gl5_update_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + lgs8gl5_read_reg(state, reg); + lgs8gl5_write_reg(state, reg, data); + return 0; +} + + +/* Writes into alternate device's register */ +/* TODO: Find out what that device is for! */ +static int +lgs8gl5_update_alt_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + int ret; + u8 b0[] = {reg}; + u8 b1[] = {0}; + u8 b2[] = {reg, data}; + struct i2c_msg msg[3] = { + { + .addr = state->config->demod_address + 2, + .flags = 0, + .buf = b0, + .len = 1 + }, + { + .addr = state->config->demod_address + 2, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + }, + { + .addr = state->config->demod_address + 2, + .flags = 0, + .buf = b2, + .len = 2 + }, + }; + + ret = i2c_transfer(state->i2c, msg, 3); + return (ret != 3) ? -1 : 0; +} + + +static void +lgs8gl5_soft_reset(struct lgs8gl5_state *state) +{ + u8 val; + + dprintk("%s\n", __func__); + + val = lgs8gl5_read_reg(state, REG_RESET); + lgs8gl5_write_reg(state, REG_RESET, val & ~REG_RESET_OFF); + lgs8gl5_write_reg(state, REG_RESET, val | REG_RESET_OFF); + msleep(5); +} + + +/* Starts demodulation */ +static void +lgs8gl5_start_demod(struct lgs8gl5_state *state) +{ + u8 val; + int n; + + dprintk("%s\n", __func__); + + lgs8gl5_update_alt_reg(state, 0xc2, 0x28); + lgs8gl5_soft_reset(state); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_write_reg(state, REG_09, 0x0e); + lgs8gl5_write_reg(state, REG_0A, 0xe5); + lgs8gl5_write_reg(state, REG_0B, 0x35); + lgs8gl5_write_reg(state, REG_0C, 0x30); + + lgs8gl5_update_reg(state, REG_03, 0x00); + lgs8gl5_update_reg(state, REG_7E, 0x01); + lgs8gl5_update_alt_reg(state, 0xc5, 0x00); + lgs8gl5_update_reg(state, REG_04, 0x02); + lgs8gl5_update_reg(state, REG_37, 0x01); + lgs8gl5_soft_reset(state); + + /* Wait for carrier */ + for (n = 0; n < 10; n++) { + val = lgs8gl5_read_reg(state, REG_STRENGTH); + dprintk("Wait for carrier[%d] 0x%02X\n", n, val); + if (val & REG_STRENGTH_CARRIER) + break; + msleep(4); + } + if (!(val & REG_STRENGTH_CARRIER)) + return; + + /* Wait for lock */ + for (n = 0; n < 20; n++) { + val = lgs8gl5_read_reg(state, REG_STATUS); + dprintk("Wait for lock[%d] 0x%02X\n", n, val); + if (val & REG_STATUS_LOCK) + break; + msleep(12); + } + if (!(val & REG_STATUS_LOCK)) + return; + + lgs8gl5_write_reg(state, REG_7D, lgs8gl5_read_reg(state, REG_A2)); + lgs8gl5_soft_reset(state); +} + + +static int +lgs8gl5_init(struct dvb_frontend *fe) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + lgs8gl5_update_alt_reg(state, 0xc2, 0x28); + lgs8gl5_soft_reset(state); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_write_reg(state, REG_09, 0x0e); + lgs8gl5_write_reg(state, REG_0A, 0xe5); + lgs8gl5_write_reg(state, REG_0B, 0x35); + lgs8gl5_write_reg(state, REG_0C, 0x30); + + return 0; +} + + +static int +lgs8gl5_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + u8 flags = lgs8gl5_read_reg(state, REG_STATUS); + + *status = 0; + + if ((level & REG_STRENGTH_MASK) > 0) + *status |= FE_HAS_SIGNAL; + if (level & REG_STRENGTH_CARRIER) + *status |= FE_HAS_CARRIER; + if (flags & REG_STATUS_SYNC) + *status |= FE_HAS_SYNC; + if (flags & REG_STATUS_LOCK) + *status |= FE_HAS_LOCK; + + return 0; +} + + +static int +lgs8gl5_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + + return 0; +} + + +static int +lgs8gl5_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + *signal_strength = (level & REG_STRENGTH_MASK) << 8; + + return 0; +} + + +static int +lgs8gl5_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + *snr = (level & REG_STRENGTH_MASK) << 8; + + return 0; +} + + +static int +lgs8gl5_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + + return 0; +} + + +static int +lgs8gl5_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct lgs8gl5_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (p->bandwidth_hz != 8000000) + return -EINVAL; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* lgs8gl5_set_inversion(state, p->inversion); */ + + lgs8gl5_start_demod(state); + + return 0; +} + + +static int +lgs8gl5_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 inv = lgs8gl5_read_reg(state, REG_INVERSION); + + p->inversion = (inv & REG_INVERSION_ON) ? INVERSION_ON : INVERSION_OFF; + + p->code_rate_HP = FEC_1_2; + p->code_rate_LP = FEC_7_8; + p->guard_interval = GUARD_INTERVAL_1_32; + p->transmission_mode = TRANSMISSION_MODE_2K; + p->modulation = QAM_64; + p->hierarchy = HIERARCHY_NONE; + p->bandwidth_hz = 8000000; + + return 0; +} + + +static int +lgs8gl5_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 240; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + + +static void +lgs8gl5_release(struct dvb_frontend *fe) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + kfree(state); +} + + +static struct dvb_frontend_ops lgs8gl5_ops; + + +struct dvb_frontend* +lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c) +{ + struct lgs8gl5_state *state = NULL; + + dprintk("%s\n", __func__); + + /* Allocate memory for the internal state */ + state = kzalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + + /* Check if the demod is there */ + if (lgs8gl5_read_reg(state, REG_RESET) < 0) + goto error; + + /* Create dvb_frontend */ + memcpy(&state->frontend.ops, &lgs8gl5_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(lgs8gl5_attach); + + +static struct dvb_frontend_ops lgs8gl5_ops = { + .delsys = { SYS_DTMB }, + .info = { + .name = "Legend Silicon LGS-8GL5 DMB-TH", + .frequency_min = 474000000, + .frequency_max = 858000000, + .frequency_stepsize = 10000, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_32 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_BANDWIDTH_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER + }, + + .release = lgs8gl5_release, + + .init = lgs8gl5_init, + + .set_frontend = lgs8gl5_set_frontend, + .get_frontend = lgs8gl5_get_frontend, + .get_tune_settings = lgs8gl5_get_tune_settings, + + .read_status = lgs8gl5_read_status, + .read_ber = lgs8gl5_read_ber, + .read_signal_strength = lgs8gl5_read_signal_strength, + .read_snr = lgs8gl5_read_snr, + .read_ucblocks = lgs8gl5_read_ucblocks, +}; + + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Legend Silicon LGS-8GL5 DMB-TH Demodulator driver"); +MODULE_AUTHOR("Timothy Lee"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/lgs8gl5.h b/drivers/media/dvb-frontends/lgs8gl5.h new file mode 100644 index 00000000..c2da5961 --- /dev/null +++ b/drivers/media/dvb-frontends/lgs8gl5.h @@ -0,0 +1,45 @@ +/* + Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver + + Copyright (C) 2008 Sirius International (Hong Kong) Limited + Timothy Lee + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef LGS8GL5_H +#define LGS8GL5_H + +#include +#include + +struct lgs8gl5_config { + /* the demodulator's i2c address */ + u8 demod_address; +}; + +#if IS_ENABLED(CONFIG_DVB_LGS8GL5) +extern struct dvb_frontend *lgs8gl5_attach( + const struct lgs8gl5_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *lgs8gl5_attach( + const struct lgs8gl5_config *config, struct i2c_adapter *i2c) { + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_LGS8GL5 */ + +#endif /* LGS8GL5_H */ diff --git a/drivers/media/dvb-frontends/lgs8gxx.c b/drivers/media/dvb-frontends/lgs8gxx.c new file mode 100644 index 00000000..3c92f36e --- /dev/null +++ b/drivers/media/dvb-frontends/lgs8gxx.c @@ -0,0 +1,1075 @@ +/* + * Support for Legend Silicon GB20600 (a.k.a DMB-TH) demodulator + * LGS8913, LGS8GL5, LGS8G75 + * experimental support LGS8G42, LGS8G52 + * + * Copyright (C) 2007-2009 David T.L. Wong + * Copyright (C) 2008 Sirius International (Hong Kong) Limited + * Timothy Lee (for initial work on LGS8GL5) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include + +#include "dvb_frontend.h" + +#include "lgs8gxx.h" +#include "lgs8gxx_priv.h" + +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "lgs8gxx: " args); \ + } while (0) + +static int debug; +static int fake_signal_str = 1; + +#define LGS8GXX_FIRMWARE "lgs8g75.fw" + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +module_param(fake_signal_str, int, 0644); +MODULE_PARM_DESC(fake_signal_str, "fake signal strength for LGS8913." +"Signal strength calculation is slow.(default:on)."); + +/* LGS8GXX internal helper functions */ + +static int lgs8gxx_write_reg(struct lgs8gxx_state *priv, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 }; + + msg.addr = priv->config->demod_address; + if (priv->config->prod != LGS8GXX_PROD_LGS8G75 && reg >= 0xC0) + msg.addr += 0x02; + + if (debug >= 2) + dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data); + + ret = i2c_transfer(priv->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n", + __func__, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static int lgs8gxx_read_reg(struct lgs8gxx_state *priv, u8 reg, u8 *p_data) +{ + int ret; + u8 dev_addr; + + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { .flags = 0, .buf = b0, .len = 1 }, + { .flags = I2C_M_RD, .buf = b1, .len = 1 }, + }; + + dev_addr = priv->config->demod_address; + if (priv->config->prod != LGS8GXX_PROD_LGS8G75 && reg >= 0xC0) + dev_addr += 0x02; + msg[1].addr = msg[0].addr = dev_addr; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret != 2) { + dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret); + return -1; + } + + *p_data = b1[0]; + if (debug >= 2) + dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, b1[0]); + return 0; +} + +static int lgs8gxx_soft_reset(struct lgs8gxx_state *priv) +{ + lgs8gxx_write_reg(priv, 0x02, 0x00); + msleep(1); + lgs8gxx_write_reg(priv, 0x02, 0x01); + msleep(100); + + return 0; +} + +static int wait_reg_mask(struct lgs8gxx_state *priv, u8 reg, u8 mask, + u8 val, u8 delay, u8 tries) +{ + u8 t; + int i; + + for (i = 0; i < tries; i++) { + lgs8gxx_read_reg(priv, reg, &t); + + if ((t & mask) == val) + return 0; + msleep(delay); + } + + return 1; +} + +static int lgs8gxx_set_ad_mode(struct lgs8gxx_state *priv) +{ + const struct lgs8gxx_config *config = priv->config; + u8 if_conf; + + if_conf = 0x10; /* AGC output on, RF_AGC output off; */ + + if_conf |= + ((config->ext_adc) ? 0x80 : 0x00) | + ((config->if_neg_center) ? 0x04 : 0x00) | + ((config->if_freq == 0) ? 0x08 : 0x00) | /* Baseband */ + ((config->adc_signed) ? 0x02 : 0x00) | + ((config->if_neg_edge) ? 0x01 : 0x00); + + if (config->ext_adc && + (config->prod == LGS8GXX_PROD_LGS8G52)) { + lgs8gxx_write_reg(priv, 0xBA, 0x40); + } + + lgs8gxx_write_reg(priv, 0x07, if_conf); + + return 0; +} + +static int lgs8gxx_set_if_freq(struct lgs8gxx_state *priv, u32 freq /*in kHz*/) +{ + u64 val; + u32 v32; + u32 if_clk; + + if_clk = priv->config->if_clk_freq; + + val = freq; + if (freq != 0) { + val <<= 32; + if (if_clk != 0) + do_div(val, if_clk); + v32 = val & 0xFFFFFFFF; + dprintk("Set IF Freq to %dkHz\n", freq); + } else { + v32 = 0; + dprintk("Set IF Freq to baseband\n"); + } + dprintk("AFC_INIT_FREQ = 0x%08X\n", v32); + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + lgs8gxx_write_reg(priv, 0x08, 0xFF & (v32)); + lgs8gxx_write_reg(priv, 0x09, 0xFF & (v32 >> 8)); + lgs8gxx_write_reg(priv, 0x0A, 0xFF & (v32 >> 16)); + lgs8gxx_write_reg(priv, 0x0B, 0xFF & (v32 >> 24)); + } else { + lgs8gxx_write_reg(priv, 0x09, 0xFF & (v32)); + lgs8gxx_write_reg(priv, 0x0A, 0xFF & (v32 >> 8)); + lgs8gxx_write_reg(priv, 0x0B, 0xFF & (v32 >> 16)); + lgs8gxx_write_reg(priv, 0x0C, 0xFF & (v32 >> 24)); + } + + return 0; +} + +static int lgs8gxx_get_afc_phase(struct lgs8gxx_state *priv) +{ + u64 val; + u32 v32 = 0; + u8 reg_addr, t; + int i; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) + reg_addr = 0x23; + else + reg_addr = 0x48; + + for (i = 0; i < 4; i++) { + lgs8gxx_read_reg(priv, reg_addr, &t); + v32 <<= 8; + v32 |= t; + reg_addr--; + } + + val = v32; + val *= priv->config->if_clk_freq; + val >>= 32; + dprintk("AFC = %u kHz\n", (u32)val); + return 0; +} + +static int lgs8gxx_set_mode_auto(struct lgs8gxx_state *priv) +{ + u8 t; + u8 prod = priv->config->prod; + + if (prod == LGS8GXX_PROD_LGS8913) + lgs8gxx_write_reg(priv, 0xC6, 0x01); + + if (prod == LGS8GXX_PROD_LGS8G75) { + lgs8gxx_read_reg(priv, 0x0C, &t); + t &= (~0x04); + lgs8gxx_write_reg(priv, 0x0C, t | 0x80); + lgs8gxx_write_reg(priv, 0x39, 0x00); + lgs8gxx_write_reg(priv, 0x3D, 0x04); + } else if (prod == LGS8GXX_PROD_LGS8913 || + prod == LGS8GXX_PROD_LGS8GL5 || + prod == LGS8GXX_PROD_LGS8G42 || + prod == LGS8GXX_PROD_LGS8G52 || + prod == LGS8GXX_PROD_LGS8G54) { + lgs8gxx_read_reg(priv, 0x7E, &t); + lgs8gxx_write_reg(priv, 0x7E, t | 0x01); + + /* clear FEC self reset */ + lgs8gxx_read_reg(priv, 0xC5, &t); + lgs8gxx_write_reg(priv, 0xC5, t & 0xE0); + } + + if (prod == LGS8GXX_PROD_LGS8913) { + /* FEC auto detect */ + lgs8gxx_write_reg(priv, 0xC1, 0x03); + + lgs8gxx_read_reg(priv, 0x7C, &t); + t = (t & 0x8C) | 0x03; + lgs8gxx_write_reg(priv, 0x7C, t); + + /* BER test mode */ + lgs8gxx_read_reg(priv, 0xC3, &t); + t = (t & 0xEF) | 0x10; + lgs8gxx_write_reg(priv, 0xC3, t); + } + + if (priv->config->prod == LGS8GXX_PROD_LGS8G52) + lgs8gxx_write_reg(priv, 0xD9, 0x40); + + return 0; +} + +static int lgs8gxx_set_mode_manual(struct lgs8gxx_state *priv) +{ + u8 t; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + u8 t2; + lgs8gxx_read_reg(priv, 0x0C, &t); + t &= (~0x80); + lgs8gxx_write_reg(priv, 0x0C, t); + + lgs8gxx_read_reg(priv, 0x0C, &t); + lgs8gxx_read_reg(priv, 0x19, &t2); + + if (((t&0x03) == 0x01) && (t2&0x01)) { + lgs8gxx_write_reg(priv, 0x6E, 0x05); + lgs8gxx_write_reg(priv, 0x39, 0x02); + lgs8gxx_write_reg(priv, 0x39, 0x03); + lgs8gxx_write_reg(priv, 0x3D, 0x05); + lgs8gxx_write_reg(priv, 0x3E, 0x28); + lgs8gxx_write_reg(priv, 0x53, 0x80); + } else { + lgs8gxx_write_reg(priv, 0x6E, 0x3F); + lgs8gxx_write_reg(priv, 0x39, 0x00); + lgs8gxx_write_reg(priv, 0x3D, 0x04); + } + + lgs8gxx_soft_reset(priv); + return 0; + } + + /* turn off auto-detect; manual settings */ + lgs8gxx_write_reg(priv, 0x7E, 0); + if (priv->config->prod == LGS8GXX_PROD_LGS8913) + lgs8gxx_write_reg(priv, 0xC1, 0); + + lgs8gxx_read_reg(priv, 0xC5, &t); + t = (t & 0xE0) | 0x06; + lgs8gxx_write_reg(priv, 0xC5, t); + + lgs8gxx_soft_reset(priv); + + return 0; +} + +static int lgs8gxx_is_locked(struct lgs8gxx_state *priv, u8 *locked) +{ + int ret = 0; + u8 t; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) + ret = lgs8gxx_read_reg(priv, 0x13, &t); + else + ret = lgs8gxx_read_reg(priv, 0x4B, &t); + if (ret != 0) + return ret; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) + *locked = ((t & 0x80) == 0x80) ? 1 : 0; + else + *locked = ((t & 0xC0) == 0xC0) ? 1 : 0; + return 0; +} + +/* Wait for Code Acquisition Lock */ +static int lgs8gxx_wait_ca_lock(struct lgs8gxx_state *priv, u8 *locked) +{ + int ret = 0; + u8 reg, mask, val; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + reg = 0x13; + mask = 0x80; + val = 0x80; + } else { + reg = 0x4B; + mask = 0xC0; + val = 0xC0; + } + + ret = wait_reg_mask(priv, reg, mask, val, 50, 40); + *locked = (ret == 0) ? 1 : 0; + + return 0; +} + +static int lgs8gxx_is_autodetect_finished(struct lgs8gxx_state *priv, + u8 *finished) +{ + int ret = 0; + u8 reg, mask, val; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + reg = 0x1f; + mask = 0xC0; + val = 0x80; + } else { + reg = 0xA4; + mask = 0x03; + val = 0x01; + } + + ret = wait_reg_mask(priv, reg, mask, val, 10, 20); + *finished = (ret == 0) ? 1 : 0; + + return 0; +} + +static int lgs8gxx_autolock_gi(struct lgs8gxx_state *priv, u8 gi, u8 cpn, + u8 *locked) +{ + int err = 0; + u8 ad_fini = 0; + u8 t1, t2; + + if (gi == GI_945) + dprintk("try GI 945\n"); + else if (gi == GI_595) + dprintk("try GI 595\n"); + else if (gi == GI_420) + dprintk("try GI 420\n"); + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + lgs8gxx_read_reg(priv, 0x0C, &t1); + lgs8gxx_read_reg(priv, 0x18, &t2); + t1 &= ~(GI_MASK); + t1 |= gi; + t2 &= 0xFE; + t2 |= cpn ? 0x01 : 0x00; + lgs8gxx_write_reg(priv, 0x0C, t1); + lgs8gxx_write_reg(priv, 0x18, t2); + } else { + lgs8gxx_write_reg(priv, 0x04, gi); + } + lgs8gxx_soft_reset(priv); + err = lgs8gxx_wait_ca_lock(priv, locked); + if (err || !(*locked)) + return err; + err = lgs8gxx_is_autodetect_finished(priv, &ad_fini); + if (err != 0) + return err; + if (ad_fini) { + dprintk("auto detect finished\n"); + } else + *locked = 0; + + return 0; +} + +static int lgs8gxx_auto_detect(struct lgs8gxx_state *priv, + u8 *detected_param, u8 *gi) +{ + int i, j; + int err = 0; + u8 locked = 0, tmp_gi; + + dprintk("%s\n", __func__); + + lgs8gxx_set_mode_auto(priv); + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + lgs8gxx_write_reg(priv, 0x67, 0xAA); + lgs8gxx_write_reg(priv, 0x6E, 0x3F); + } else { + /* Guard Interval */ + lgs8gxx_write_reg(priv, 0x03, 00); + } + + for (i = 0; i < 2; i++) { + for (j = 0; j < 2; j++) { + tmp_gi = GI_945; + err = lgs8gxx_autolock_gi(priv, GI_945, j, &locked); + if (err) + goto out; + if (locked) + goto locked; + } + for (j = 0; j < 2; j++) { + tmp_gi = GI_420; + err = lgs8gxx_autolock_gi(priv, GI_420, j, &locked); + if (err) + goto out; + if (locked) + goto locked; + } + tmp_gi = GI_595; + err = lgs8gxx_autolock_gi(priv, GI_595, 1, &locked); + if (err) + goto out; + if (locked) + goto locked; + } + +locked: + if ((err == 0) && (locked == 1)) { + u8 t; + + if (priv->config->prod != LGS8GXX_PROD_LGS8G75) { + lgs8gxx_read_reg(priv, 0xA2, &t); + *detected_param = t; + } else { + lgs8gxx_read_reg(priv, 0x1F, &t); + *detected_param = t & 0x3F; + } + + if (tmp_gi == GI_945) + dprintk("GI 945 locked\n"); + else if (tmp_gi == GI_595) + dprintk("GI 595 locked\n"); + else if (tmp_gi == GI_420) + dprintk("GI 420 locked\n"); + *gi = tmp_gi; + } + if (!locked) + err = -1; + +out: + return err; +} + +static void lgs8gxx_auto_lock(struct lgs8gxx_state *priv) +{ + s8 err; + u8 gi = 0x2; + u8 detected_param = 0; + + err = lgs8gxx_auto_detect(priv, &detected_param, &gi); + + if (err != 0) { + dprintk("lgs8gxx_auto_detect failed\n"); + } else + dprintk("detected param = 0x%02X\n", detected_param); + + /* Apply detected parameters */ + if (priv->config->prod == LGS8GXX_PROD_LGS8913) { + u8 inter_leave_len = detected_param & TIM_MASK ; + /* Fix 8913 time interleaver detection bug */ + inter_leave_len = (inter_leave_len == TIM_MIDDLE) ? 0x60 : 0x40; + detected_param &= CF_MASK | SC_MASK | LGS_FEC_MASK; + detected_param |= inter_leave_len; + } + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + u8 t; + lgs8gxx_read_reg(priv, 0x19, &t); + t &= 0x81; + t |= detected_param << 1; + lgs8gxx_write_reg(priv, 0x19, t); + } else { + lgs8gxx_write_reg(priv, 0x7D, detected_param); + if (priv->config->prod == LGS8GXX_PROD_LGS8913) + lgs8gxx_write_reg(priv, 0xC0, detected_param); + } + /* lgs8gxx_soft_reset(priv); */ + + /* Enter manual mode */ + lgs8gxx_set_mode_manual(priv); + + switch (gi) { + case GI_945: + priv->curr_gi = 945; break; + case GI_595: + priv->curr_gi = 595; break; + case GI_420: + priv->curr_gi = 420; break; + default: + priv->curr_gi = 945; break; + } +} + +static int lgs8gxx_set_mpeg_mode(struct lgs8gxx_state *priv, + u8 serial, u8 clk_pol, u8 clk_gated) +{ + int ret = 0; + u8 t, reg_addr; + + reg_addr = (priv->config->prod == LGS8GXX_PROD_LGS8G75) ? 0x30 : 0xC2; + ret = lgs8gxx_read_reg(priv, reg_addr, &t); + if (ret != 0) + return ret; + + t &= 0xF8; + t |= serial ? TS_SERIAL : TS_PARALLEL; + t |= clk_pol ? TS_CLK_INVERTED : TS_CLK_NORMAL; + t |= clk_gated ? TS_CLK_GATED : TS_CLK_FREERUN; + + ret = lgs8gxx_write_reg(priv, reg_addr, t); + if (ret != 0) + return ret; + + return 0; +} + +/* A/D input peak-to-peak voltage range */ +static int lgs8g75_set_adc_vpp(struct lgs8gxx_state *priv, + u8 sel) +{ + u8 r26 = 0x73, r27 = 0x90; + + if (priv->config->prod != LGS8GXX_PROD_LGS8G75) + return 0; + + r26 |= (sel & 0x01) << 7; + r27 |= (sel & 0x02) >> 1; + lgs8gxx_write_reg(priv, 0x26, r26); + lgs8gxx_write_reg(priv, 0x27, r27); + + return 0; +} + +/* LGS8913 demod frontend functions */ + +static int lgs8913_init(struct lgs8gxx_state *priv) +{ + u8 t; + + /* LGS8913 specific */ + lgs8gxx_write_reg(priv, 0xc1, 0x3); + + lgs8gxx_read_reg(priv, 0x7c, &t); + lgs8gxx_write_reg(priv, 0x7c, (t&0x8c) | 0x3); + + /* LGS8913 specific */ + lgs8gxx_read_reg(priv, 0xc3, &t); + lgs8gxx_write_reg(priv, 0xc3, t&0x10); + + + return 0; +} + +static int lgs8g75_init_data(struct lgs8gxx_state *priv) +{ + const struct firmware *fw; + int rc; + int i; + + rc = request_firmware(&fw, LGS8GXX_FIRMWARE, &priv->i2c->dev); + if (rc) + return rc; + + lgs8gxx_write_reg(priv, 0xC6, 0x40); + + lgs8gxx_write_reg(priv, 0x3D, 0x04); + lgs8gxx_write_reg(priv, 0x39, 0x00); + + lgs8gxx_write_reg(priv, 0x3A, 0x00); + lgs8gxx_write_reg(priv, 0x38, 0x00); + lgs8gxx_write_reg(priv, 0x3B, 0x00); + lgs8gxx_write_reg(priv, 0x38, 0x00); + + for (i = 0; i < fw->size; i++) { + lgs8gxx_write_reg(priv, 0x38, 0x00); + lgs8gxx_write_reg(priv, 0x3A, (u8)(i&0xff)); + lgs8gxx_write_reg(priv, 0x3B, (u8)(i>>8)); + lgs8gxx_write_reg(priv, 0x3C, fw->data[i]); + } + + lgs8gxx_write_reg(priv, 0x38, 0x00); + + release_firmware(fw); + return 0; +} + +static int lgs8gxx_init(struct dvb_frontend *fe) +{ + struct lgs8gxx_state *priv = + (struct lgs8gxx_state *)fe->demodulator_priv; + const struct lgs8gxx_config *config = priv->config; + u8 data = 0; + s8 err; + dprintk("%s\n", __func__); + + lgs8gxx_read_reg(priv, 0, &data); + dprintk("reg 0 = 0x%02X\n", data); + + if (config->prod == LGS8GXX_PROD_LGS8G75) + lgs8g75_set_adc_vpp(priv, config->adc_vpp); + + /* Setup MPEG output format */ + err = lgs8gxx_set_mpeg_mode(priv, config->serial_ts, + config->ts_clk_pol, + config->ts_clk_gated); + if (err != 0) + return -EIO; + + if (config->prod == LGS8GXX_PROD_LGS8913) + lgs8913_init(priv); + lgs8gxx_set_if_freq(priv, priv->config->if_freq); + lgs8gxx_set_ad_mode(priv); + + return 0; +} + +static void lgs8gxx_release(struct dvb_frontend *fe) +{ + struct lgs8gxx_state *state = fe->demodulator_priv; + dprintk("%s\n", __func__); + + kfree(state); +} + + +static int lgs8gxx_write(struct dvb_frontend *fe, const u8 buf[], int len) +{ + struct lgs8gxx_state *priv = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return lgs8gxx_write_reg(priv, buf[0], buf[1]); +} + +static int lgs8gxx_set_fe(struct dvb_frontend *fe) +{ + + struct lgs8gxx_state *priv = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + /* set frequency */ + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* start auto lock */ + lgs8gxx_auto_lock(priv); + + msleep(10); + + return 0; +} + +static int lgs8gxx_get_fe(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache; + dprintk("%s\n", __func__); + + /* TODO: get real readings from device */ + /* inversion status */ + fe_params->inversion = INVERSION_OFF; + + /* bandwidth */ + fe_params->bandwidth_hz = 8000000; + + fe_params->code_rate_HP = FEC_AUTO; + fe_params->code_rate_LP = FEC_AUTO; + + fe_params->modulation = QAM_AUTO; + + /* transmission mode */ + fe_params->transmission_mode = TRANSMISSION_MODE_AUTO; + + /* guard interval */ + fe_params->guard_interval = GUARD_INTERVAL_AUTO; + + /* hierarchy */ + fe_params->hierarchy = HIERARCHY_NONE; + + return 0; +} + +static +int lgs8gxx_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + /* FIXME: copy from tda1004x.c */ + fesettings->min_delay_ms = 800; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static int lgs8gxx_read_status(struct dvb_frontend *fe, fe_status_t *fe_status) +{ + struct lgs8gxx_state *priv = fe->demodulator_priv; + s8 ret; + u8 t, locked = 0; + + dprintk("%s\n", __func__); + *fe_status = 0; + + lgs8gxx_get_afc_phase(priv); + lgs8gxx_is_locked(priv, &locked); + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + if (locked) + *fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + return 0; + } + + ret = lgs8gxx_read_reg(priv, 0x4B, &t); + if (ret != 0) + return -EIO; + + dprintk("Reg 0x4B: 0x%02X\n", t); + + *fe_status = 0; + if (priv->config->prod == LGS8GXX_PROD_LGS8913) { + if ((t & 0x40) == 0x40) + *fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; + if ((t & 0x80) == 0x80) + *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | + FE_HAS_LOCK; + } else { + if ((t & 0x80) == 0x80) + *fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } + + /* success */ + dprintk("%s: fe_status=0x%x\n", __func__, *fe_status); + return 0; +} + +static int lgs8gxx_read_signal_agc(struct lgs8gxx_state *priv, u16 *signal) +{ + u16 v; + u8 agc_lvl[2], cat; + + dprintk("%s()\n", __func__); + lgs8gxx_read_reg(priv, 0x3F, &agc_lvl[0]); + lgs8gxx_read_reg(priv, 0x3E, &agc_lvl[1]); + + v = agc_lvl[0]; + v <<= 8; + v |= agc_lvl[1]; + + dprintk("agc_lvl: 0x%04X\n", v); + + if (v < 0x100) + cat = 0; + else if (v < 0x190) + cat = 5; + else if (v < 0x2A8) + cat = 4; + else if (v < 0x381) + cat = 3; + else if (v < 0x400) + cat = 2; + else if (v == 0x400) + cat = 1; + else + cat = 0; + + *signal = cat * 65535 / 5; + + return 0; +} + +static int lgs8913_read_signal_strength(struct lgs8gxx_state *priv, u16 *signal) +{ + u8 t; s8 ret; + s16 max_strength = 0; + u8 str; + u16 i, gi = priv->curr_gi; + + dprintk("%s\n", __func__); + + ret = lgs8gxx_read_reg(priv, 0x4B, &t); + if (ret != 0) + return -EIO; + + if (fake_signal_str) { + if ((t & 0xC0) == 0xC0) { + dprintk("Fake signal strength\n"); + *signal = 0x7FFF; + } else + *signal = 0; + return 0; + } + + dprintk("gi = %d\n", gi); + for (i = 0; i < gi; i++) { + + if ((i & 0xFF) == 0) + lgs8gxx_write_reg(priv, 0x84, 0x03 & (i >> 8)); + lgs8gxx_write_reg(priv, 0x83, i & 0xFF); + + lgs8gxx_read_reg(priv, 0x94, &str); + if (max_strength < str) + max_strength = str; + } + + *signal = max_strength; + dprintk("%s: signal=0x%02X\n", __func__, *signal); + + lgs8gxx_read_reg(priv, 0x95, &t); + dprintk("%s: AVG Noise=0x%02X\n", __func__, t); + + return 0; +} + +static int lgs8g75_read_signal_strength(struct lgs8gxx_state *priv, u16 *signal) +{ + u8 t; + s16 v = 0; + + dprintk("%s\n", __func__); + + lgs8gxx_read_reg(priv, 0xB1, &t); + v |= t; + v <<= 8; + lgs8gxx_read_reg(priv, 0xB0, &t); + v |= t; + + *signal = v; + dprintk("%s: signal=0x%02X\n", __func__, *signal); + + return 0; +} + +static int lgs8gxx_read_signal_strength(struct dvb_frontend *fe, u16 *signal) +{ + struct lgs8gxx_state *priv = fe->demodulator_priv; + + if (priv->config->prod == LGS8GXX_PROD_LGS8913) + return lgs8913_read_signal_strength(priv, signal); + else if (priv->config->prod == LGS8GXX_PROD_LGS8G75) + return lgs8g75_read_signal_strength(priv, signal); + else + return lgs8gxx_read_signal_agc(priv, signal); +} + +static int lgs8gxx_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct lgs8gxx_state *priv = fe->demodulator_priv; + u8 t; + *snr = 0; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) + lgs8gxx_read_reg(priv, 0x34, &t); + else + lgs8gxx_read_reg(priv, 0x95, &t); + dprintk("AVG Noise=0x%02X\n", t); + *snr = 256 - t; + *snr <<= 8; + dprintk("snr=0x%x\n", *snr); + + return 0; +} + +static int lgs8gxx_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks); + return 0; +} + +static void packet_counter_start(struct lgs8gxx_state *priv) +{ + u8 orig, t; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + lgs8gxx_read_reg(priv, 0x30, &orig); + orig &= 0xE7; + t = orig | 0x10; + lgs8gxx_write_reg(priv, 0x30, t); + t = orig | 0x18; + lgs8gxx_write_reg(priv, 0x30, t); + t = orig | 0x10; + lgs8gxx_write_reg(priv, 0x30, t); + } else { + lgs8gxx_write_reg(priv, 0xC6, 0x01); + lgs8gxx_write_reg(priv, 0xC6, 0x41); + lgs8gxx_write_reg(priv, 0xC6, 0x01); + } +} + +static void packet_counter_stop(struct lgs8gxx_state *priv) +{ + u8 t; + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + lgs8gxx_read_reg(priv, 0x30, &t); + t &= 0xE7; + lgs8gxx_write_reg(priv, 0x30, t); + } else { + lgs8gxx_write_reg(priv, 0xC6, 0x81); + } +} + +static int lgs8gxx_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct lgs8gxx_state *priv = fe->demodulator_priv; + u8 reg_err, reg_total, t; + u32 total_cnt = 0, err_cnt = 0; + int i; + + dprintk("%s\n", __func__); + + packet_counter_start(priv); + msleep(200); + packet_counter_stop(priv); + + if (priv->config->prod == LGS8GXX_PROD_LGS8G75) { + reg_total = 0x28; reg_err = 0x2C; + } else { + reg_total = 0xD0; reg_err = 0xD4; + } + + for (i = 0; i < 4; i++) { + total_cnt <<= 8; + lgs8gxx_read_reg(priv, reg_total+3-i, &t); + total_cnt |= t; + } + for (i = 0; i < 4; i++) { + err_cnt <<= 8; + lgs8gxx_read_reg(priv, reg_err+3-i, &t); + err_cnt |= t; + } + dprintk("error=%d total=%d\n", err_cnt, total_cnt); + + if (total_cnt == 0) + *ber = 0; + else + *ber = err_cnt * 100 / total_cnt; + + dprintk("%s: ber=0x%x\n", __func__, *ber); + return 0; +} + +static int lgs8gxx_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct lgs8gxx_state *priv = fe->demodulator_priv; + + if (priv->config->tuner_address == 0) + return 0; + if (enable) { + u8 v = 0x80 | priv->config->tuner_address; + return lgs8gxx_write_reg(priv, 0x01, v); + } + return lgs8gxx_write_reg(priv, 0x01, 0); +} + +static struct dvb_frontend_ops lgs8gxx_ops = { + .delsys = { SYS_DTMB }, + .info = { + .name = "Legend Silicon LGS8913/LGS8GXX DMB-TH", + .frequency_min = 474000000, + .frequency_max = 858000000, + .frequency_stepsize = 10000, + .caps = + FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO + }, + + .release = lgs8gxx_release, + + .init = lgs8gxx_init, + .write = lgs8gxx_write, + .i2c_gate_ctrl = lgs8gxx_i2c_gate_ctrl, + + .set_frontend = lgs8gxx_set_fe, + .get_frontend = lgs8gxx_get_fe, + .get_tune_settings = lgs8gxx_get_tune_settings, + + .read_status = lgs8gxx_read_status, + .read_ber = lgs8gxx_read_ber, + .read_signal_strength = lgs8gxx_read_signal_strength, + .read_snr = lgs8gxx_read_snr, + .read_ucblocks = lgs8gxx_read_ucblocks, +}; + +struct dvb_frontend *lgs8gxx_attach(const struct lgs8gxx_config *config, + struct i2c_adapter *i2c) +{ + struct lgs8gxx_state *priv = NULL; + u8 data = 0; + + dprintk("%s()\n", __func__); + + if (config == NULL || i2c == NULL) + return NULL; + + priv = kzalloc(sizeof(struct lgs8gxx_state), GFP_KERNEL); + if (priv == NULL) + goto error_out; + + priv->config = config; + priv->i2c = i2c; + + /* check if the demod is there */ + if (lgs8gxx_read_reg(priv, 0, &data) != 0) { + dprintk("%s lgs8gxx not found at i2c addr 0x%02X\n", + __func__, priv->config->demod_address); + goto error_out; + } + + lgs8gxx_read_reg(priv, 1, &data); + + memcpy(&priv->frontend.ops, &lgs8gxx_ops, + sizeof(struct dvb_frontend_ops)); + priv->frontend.demodulator_priv = priv; + + if (config->prod == LGS8GXX_PROD_LGS8G75) + lgs8g75_init_data(priv); + + return &priv->frontend; + +error_out: + dprintk("%s() error_out\n", __func__); + kfree(priv); + return NULL; + +} +EXPORT_SYMBOL(lgs8gxx_attach); + +MODULE_DESCRIPTION("Legend Silicon LGS8913/LGS8GXX DMB-TH demodulator driver"); +MODULE_AUTHOR("David T. L. Wong "); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(LGS8GXX_FIRMWARE); diff --git a/drivers/media/dvb-frontends/lgs8gxx.h b/drivers/media/dvb-frontends/lgs8gxx.h new file mode 100644 index 00000000..dadb78bf --- /dev/null +++ b/drivers/media/dvb-frontends/lgs8gxx.h @@ -0,0 +1,95 @@ +/* + * Support for Legend Silicon GB20600 (a.k.a DMB-TH) demodulator + * LGS8913, LGS8GL5, LGS8G75 + * experimental support LGS8G42, LGS8G52 + * + * Copyright (C) 2007-2009 David T.L. Wong + * Copyright (C) 2008 Sirius International (Hong Kong) Limited + * Timothy Lee (for initial work on LGS8GL5) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __LGS8GXX_H__ +#define __LGS8GXX_H__ + +#include +#include +#include + +#define LGS8GXX_PROD_LGS8913 0 +#define LGS8GXX_PROD_LGS8GL5 1 +#define LGS8GXX_PROD_LGS8G42 3 +#define LGS8GXX_PROD_LGS8G52 4 +#define LGS8GXX_PROD_LGS8G54 5 +#define LGS8GXX_PROD_LGS8G75 6 + +struct lgs8gxx_config { + + /* product type */ + u8 prod; + + /* the demodulator's i2c address */ + u8 demod_address; + + /* parallel or serial transport stream */ + u8 serial_ts; + + /* transport stream polarity*/ + u8 ts_clk_pol; + + /* transport stream clock gated by ts_valid */ + u8 ts_clk_gated; + + /* A/D Clock frequency */ + u32 if_clk_freq; /* in kHz */ + + /* IF frequency */ + u32 if_freq; /* in kHz */ + + /*Use External ADC*/ + u8 ext_adc; + + /*External ADC output two's complement*/ + u8 adc_signed; + + /*Sample IF data at falling edge of IF_CLK*/ + u8 if_neg_edge; + + /*IF use Negative center frequency*/ + u8 if_neg_center; + + /*8G75 internal ADC input range selection*/ + /*0: 0.8Vpp, 1: 1.0Vpp, 2: 1.6Vpp, 3: 2.0Vpp*/ + u8 adc_vpp; + + /* slave address and configuration of the tuner */ + u8 tuner_address; +}; + +#if IS_ENABLED(CONFIG_DVB_LGS8GXX) +extern struct dvb_frontend *lgs8gxx_attach(const struct lgs8gxx_config *config, + struct i2c_adapter *i2c); +#else +static inline +struct dvb_frontend *lgs8gxx_attach(const struct lgs8gxx_config *config, + struct i2c_adapter *i2c) { + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_LGS8GXX */ + +#endif /* __LGS8GXX_H__ */ diff --git a/drivers/media/dvb-frontends/lgs8gxx_priv.h b/drivers/media/dvb-frontends/lgs8gxx_priv.h new file mode 100644 index 00000000..8ef376f1 --- /dev/null +++ b/drivers/media/dvb-frontends/lgs8gxx_priv.h @@ -0,0 +1,70 @@ +/* + * Support for Legend Silicon GB20600 (a.k.a DMB-TH) demodulator + * LGS8913, LGS8GL5, LGS8G75 + * experimental support LGS8G42, LGS8G52 + * + * Copyright (C) 2007-2009 David T.L. Wong + * Copyright (C) 2008 Sirius International (Hong Kong) Limited + * Timothy Lee (for initial work on LGS8GL5) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef LGS8913_PRIV_H +#define LGS8913_PRIV_H + +struct lgs8gxx_state { + struct i2c_adapter *i2c; + /* configuration settings */ + const struct lgs8gxx_config *config; + struct dvb_frontend frontend; + u16 curr_gi; /* current guard interval */ +}; + +#define SC_MASK 0x1C /* Sub-Carrier Modulation Mask */ +#define SC_QAM64 0x10 /* 64QAM modulation */ +#define SC_QAM32 0x0C /* 32QAM modulation */ +#define SC_QAM16 0x08 /* 16QAM modulation */ +#define SC_QAM4NR 0x04 /* 4QAM-NR modulation */ +#define SC_QAM4 0x00 /* 4QAM modulation */ + +#define LGS_FEC_MASK 0x03 /* FEC Rate Mask */ +#define LGS_FEC_0_4 0x00 /* FEC Rate 0.4 */ +#define LGS_FEC_0_6 0x01 /* FEC Rate 0.6 */ +#define LGS_FEC_0_8 0x02 /* FEC Rate 0.8 */ + +#define TIM_MASK 0x20 /* Time Interleave Length Mask */ +#define TIM_LONG 0x20 /* Time Interleave Length = 720 */ +#define TIM_MIDDLE 0x00 /* Time Interleave Length = 240 */ + +#define CF_MASK 0x80 /* Control Frame Mask */ +#define CF_EN 0x80 /* Control Frame On */ + +#define GI_MASK 0x03 /* Guard Interval Mask */ +#define GI_420 0x00 /* 1/9 Guard Interval */ +#define GI_595 0x01 /* */ +#define GI_945 0x02 /* 1/4 Guard Interval */ + + +#define TS_PARALLEL 0x00 /* Parallel TS Output a.k.a. SPI */ +#define TS_SERIAL 0x01 /* Serial TS Output a.k.a. SSI */ +#define TS_CLK_NORMAL 0x00 /* MPEG Clock Normal */ +#define TS_CLK_INVERTED 0x02 /* MPEG Clock Inverted */ +#define TS_CLK_GATED 0x00 /* MPEG clock gated */ +#define TS_CLK_FREERUN 0x04 /* MPEG clock free running*/ + + +#endif diff --git a/drivers/media/dvb-frontends/lnbh24.h b/drivers/media/dvb-frontends/lnbh24.h new file mode 100644 index 00000000..b327a4f3 --- /dev/null +++ b/drivers/media/dvb-frontends/lnbh24.h @@ -0,0 +1,56 @@ +/* + * lnbh24.h - driver for lnb supply and control ic lnbh24 + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _LNBH24_H +#define _LNBH24_H + +#include + +/* system register bits */ +#define LNBH24_OLF 0x01 +#define LNBH24_OTF 0x02 +#define LNBH24_EN 0x04 +#define LNBH24_VSEL 0x08 +#define LNBH24_LLC 0x10 +#define LNBH24_TEN 0x20 +#define LNBH24_TTX 0x40 +#define LNBH24_PCL 0x80 + +#include + +#if IS_ENABLED(CONFIG_DVB_LNBP21) +/* override_set and override_clear control which + system register bits (above) to always set & clear */ +extern struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear, u8 i2c_addr); +#else +static inline struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear, u8 i2c_addr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/lnbp21.c b/drivers/media/dvb-frontends/lnbp21.c new file mode 100644 index 00000000..f3ba7b5f --- /dev/null +++ b/drivers/media/dvb-frontends/lnbp21.c @@ -0,0 +1,188 @@ +/* + * lnbp21.c - driver for lnb supply and control ic lnbp21 + * + * Copyright (C) 2006, 2009 Oliver Endriss + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "lnbp21.h" +#include "lnbh24.h" + +struct lnbp21 { + u8 config; + u8 override_or; + u8 override_and; + struct i2c_adapter *i2c; + u8 i2c_addr; +}; + +static int lnbp21_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv; + struct i2c_msg msg = { .addr = lnbp21->i2c_addr, .flags = 0, + .buf = &lnbp21->config, + .len = sizeof(lnbp21->config) }; + + lnbp21->config &= ~(LNBP21_VSEL | LNBP21_EN); + + switch(voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + lnbp21->config |= LNBP21_EN; + break; + case SEC_VOLTAGE_18: + lnbp21->config |= (LNBP21_EN | LNBP21_VSEL); + break; + default: + return -EINVAL; + } + + lnbp21->config |= lnbp21->override_or; + lnbp21->config &= lnbp21->override_and; + + return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) +{ + struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv; + struct i2c_msg msg = { .addr = lnbp21->i2c_addr, .flags = 0, + .buf = &lnbp21->config, + .len = sizeof(lnbp21->config) }; + + if (arg) + lnbp21->config |= LNBP21_LLC; + else + lnbp21->config &= ~LNBP21_LLC; + + lnbp21->config |= lnbp21->override_or; + lnbp21->config &= lnbp21->override_and; + + return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int lnbp21_set_tone(struct dvb_frontend *fe, + fe_sec_tone_mode_t tone) +{ + struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv; + struct i2c_msg msg = { .addr = lnbp21->i2c_addr, .flags = 0, + .buf = &lnbp21->config, + .len = sizeof(lnbp21->config) }; + + switch (tone) { + case SEC_TONE_OFF: + lnbp21->config &= ~LNBP21_TEN; + break; + case SEC_TONE_ON: + lnbp21->config |= LNBP21_TEN; + break; + default: + return -EINVAL; + } + + lnbp21->config |= lnbp21->override_or; + lnbp21->config &= lnbp21->override_and; + + return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static void lnbp21_release(struct dvb_frontend *fe) +{ + /* LNBP power off */ + lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF); + + /* free data */ + kfree(fe->sec_priv); + fe->sec_priv = NULL; +} + +static struct dvb_frontend *lnbx2x_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear, u8 i2c_addr, u8 config) +{ + struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL); + if (!lnbp21) + return NULL; + + /* default configuration */ + lnbp21->config = config; + lnbp21->i2c = i2c; + lnbp21->i2c_addr = i2c_addr; + fe->sec_priv = lnbp21; + + /* bits which should be forced to '1' */ + lnbp21->override_or = override_set; + + /* bits which should be forced to '0' */ + lnbp21->override_and = ~override_clear; + + /* detect if it is present or not */ + if (lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF)) { + kfree(lnbp21); + return NULL; + } + + /* install release callback */ + fe->ops.release_sec = lnbp21_release; + + /* override frontend ops */ + fe->ops.set_voltage = lnbp21_set_voltage; + fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; + if (!(override_clear & LNBH24_TEN)) /*22kHz logic controlled by demod*/ + fe->ops.set_tone = lnbp21_set_tone; + printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr); + + return fe; +} + +struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear, u8 i2c_addr) +{ + return lnbx2x_attach(fe, i2c, override_set, override_clear, + i2c_addr, LNBH24_TTX); +} +EXPORT_SYMBOL(lnbh24_attach); + +struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear) +{ + return lnbx2x_attach(fe, i2c, override_set, override_clear, + 0x08, LNBP21_ISEL); +} +EXPORT_SYMBOL(lnbp21_attach); + +MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp21, lnbh24"); +MODULE_AUTHOR("Oliver Endriss, Igor M. Liplianin"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/lnbp21.h b/drivers/media/dvb-frontends/lnbp21.h new file mode 100644 index 00000000..dbcbcc2f --- /dev/null +++ b/drivers/media/dvb-frontends/lnbp21.h @@ -0,0 +1,76 @@ +/* + * lnbp21.h - driver for lnb supply and control ic lnbp21 + * + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef _LNBP21_H +#define _LNBP21_H + +#include + +/* system register bits */ +/* [RO] 0=OK; 1=over current limit flag */ +#define LNBP21_OLF 0x01 +/* [RO] 0=OK; 1=over temperature flag (150 C) */ +#define LNBP21_OTF 0x02 +/* [RW] 0=disable LNB power, enable loopthrough + 1=enable LNB power, disable loopthrough */ +#define LNBP21_EN 0x04 +/* [RW] 0=low voltage (13/14V, vert pol) + 1=high voltage (18/19V,horiz pol) */ +#define LNBP21_VSEL 0x08 +/* [RW] increase LNB voltage by 1V: + 0=13/18V; 1=14/19V */ +#define LNBP21_LLC 0x10 +/* [RW] 0=tone controlled by DSQIN pin + 1=tone enable, disable DSQIN */ +#define LNBP21_TEN 0x20 +/* [RW] current limit select: + 0:Iout=500-650mA Isc=300mA + 1:Iout=400-550mA Isc=200mA */ +#define LNBP21_ISEL 0x40 +/* [RW] short-circuit protect: + 0=pulsed (dynamic) curr limiting + 1=static curr limiting */ +#define LNBP21_PCL 0x80 + +#include + +#if IS_ENABLED(CONFIG_DVB_LNBP21) +/* override_set and override_clear control which + system register bits (above) to always set & clear */ +extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear); +#else +static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/lnbp22.c b/drivers/media/dvb-frontends/lnbp22.c new file mode 100644 index 00000000..c463da7f --- /dev/null +++ b/drivers/media/dvb-frontends/lnbp22.c @@ -0,0 +1,148 @@ +/* + * lnbp22.h - driver for lnb supply and control ic lnbp22 + * + * Copyright (C) 2006 Dominik Kuhlen + * Based on lnbp21 driver + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "lnbp22.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + + +#define dprintk(lvl, arg...) if (debug >= (lvl)) printk(arg) + +struct lnbp22 { + u8 config[4]; + struct i2c_adapter *i2c; +}; + +static int lnbp22_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct lnbp22 *lnbp22 = (struct lnbp22 *)fe->sec_priv; + struct i2c_msg msg = { + .addr = 0x08, + .flags = 0, + .buf = (char *)&lnbp22->config, + .len = sizeof(lnbp22->config), + }; + + dprintk(1, "%s: %d (18V=%d 13V=%d)\n", __func__, voltage, + SEC_VOLTAGE_18, SEC_VOLTAGE_13); + + lnbp22->config[3] = 0x60; /* Power down */ + switch (voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + lnbp22->config[3] |= LNBP22_EN; + break; + case SEC_VOLTAGE_18: + lnbp22->config[3] |= (LNBP22_EN | LNBP22_VSEL); + break; + default: + return -EINVAL; + } + + dprintk(1, "%s: 0x%02x)\n", __func__, lnbp22->config[3]); + return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int lnbp22_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) +{ + struct lnbp22 *lnbp22 = (struct lnbp22 *) fe->sec_priv; + struct i2c_msg msg = { + .addr = 0x08, + .flags = 0, + .buf = (char *)&lnbp22->config, + .len = sizeof(lnbp22->config), + }; + + dprintk(1, "%s: %d\n", __func__, (int)arg); + if (arg) + lnbp22->config[3] |= LNBP22_LLC; + else + lnbp22->config[3] &= ~LNBP22_LLC; + + return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static void lnbp22_release(struct dvb_frontend *fe) +{ + dprintk(1, "%s\n", __func__); + /* LNBP power off */ + lnbp22_set_voltage(fe, SEC_VOLTAGE_OFF); + + /* free data */ + kfree(fe->sec_priv); + fe->sec_priv = NULL; +} + +struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c) +{ + struct lnbp22 *lnbp22 = kmalloc(sizeof(struct lnbp22), GFP_KERNEL); + if (!lnbp22) + return NULL; + + /* default configuration */ + lnbp22->config[0] = 0x00; /* ? */ + lnbp22->config[1] = 0x28; /* ? */ + lnbp22->config[2] = 0x48; /* ? */ + lnbp22->config[3] = 0x60; /* Power down */ + lnbp22->i2c = i2c; + fe->sec_priv = lnbp22; + + /* detect if it is present or not */ + if (lnbp22_set_voltage(fe, SEC_VOLTAGE_OFF)) { + dprintk(0, "%s LNBP22 not found\n", __func__); + kfree(lnbp22); + fe->sec_priv = NULL; + return NULL; + } + + /* install release callback */ + fe->ops.release_sec = lnbp22_release; + + /* override frontend ops */ + fe->ops.set_voltage = lnbp22_set_voltage; + fe->ops.enable_high_lnb_voltage = lnbp22_enable_high_lnb_voltage; + + return fe; +} +EXPORT_SYMBOL(lnbp22_attach); + +MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp22"); +MODULE_AUTHOR("Dominik Kuhlen"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/lnbp22.h b/drivers/media/dvb-frontends/lnbp22.h new file mode 100644 index 00000000..63861b31 --- /dev/null +++ b/drivers/media/dvb-frontends/lnbp22.h @@ -0,0 +1,58 @@ +/* + * lnbp22.h - driver for lnb supply and control ic lnbp22 + * + * Copyright (C) 2006 Dominik Kuhlen + * Based on lnbp21.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef _LNBP22_H +#define _LNBP22_H + +#include + +/* Enable */ +#define LNBP22_EN 0x10 +/* Voltage selection */ +#define LNBP22_VSEL 0x02 +/* Plus 1 Volt Bit */ +#define LNBP22_LLC 0x01 + +#include + +#if IS_ENABLED(CONFIG_DVB_LNBP22) +/* + * override_set and override_clear control which system register bits (above) + * to always set & clear + */ +extern struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_LNBP22 */ + +#endif /* _LNBP22_H */ diff --git a/drivers/media/dvb-frontends/m88rs2000.c b/drivers/media/dvb-frontends/m88rs2000.c new file mode 100644 index 00000000..c7a1c8eb --- /dev/null +++ b/drivers/media/dvb-frontends/m88rs2000.c @@ -0,0 +1,819 @@ +/* + Driver for M88RS2000 demodulator and tuner + + Copyright (C) 2012 Malcolm Priestley (tvboxspy@gmail.com) + Beta Driver + + Include various calculation code from DS3000 driver. + Copyright (C) 2009 Konstantin Dimitrov. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +#include +#include +#include +#include +#include +#include +#include + + +#include "dvb_frontend.h" +#include "m88rs2000.h" + +struct m88rs2000_state { + struct i2c_adapter *i2c; + const struct m88rs2000_config *config; + struct dvb_frontend frontend; + u8 no_lock_count; + u32 tuner_frequency; + u32 symbol_rate; + fe_code_rate_t fec_inner; + u8 tuner_level; + int errmode; +}; + +static int m88rs2000_debug; + +module_param_named(debug, m88rs2000_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); + +#define dprintk(level, args...) do { \ + if (level & m88rs2000_debug) \ + printk(KERN_DEBUG "m88rs2000-fe: " args); \ +} while (0) + +#define deb_info(args...) dprintk(0x01, args) +#define info(format, arg...) \ + printk(KERN_INFO "m88rs2000-fe: " format "\n" , ## arg) + +static int m88rs2000_writereg(struct m88rs2000_state *state, + u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_addr, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + deb_info("%s: writereg error (reg == 0x%02x, val == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static u8 m88rs2000_readreg(struct m88rs2000_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + { + .addr = state->config->demod_addr, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_addr, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + deb_info("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static u32 m88rs2000_get_mclk(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u32 mclk; + u8 reg; + /* Must not be 0x00 or 0xff */ + reg = m88rs2000_readreg(state, 0x86); + if (!reg || reg == 0xff) + return 0; + + reg /= 2; + reg += 1; + + mclk = (u32)(reg * RS2000_FE_CRYSTAL_KHZ + 28 / 2) / 28; + + return mclk; +} + +static int m88rs2000_set_carrieroffset(struct dvb_frontend *fe, s16 offset) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u32 mclk; + s32 tmp; + u8 reg; + int ret; + + mclk = m88rs2000_get_mclk(fe); + if (!mclk) + return -EINVAL; + + tmp = (offset * 4096 + (s32)mclk / 2) / (s32)mclk; + if (tmp < 0) + tmp += 4096; + + /* Carrier Offset */ + ret = m88rs2000_writereg(state, 0x9c, (u8)(tmp >> 4)); + + reg = m88rs2000_readreg(state, 0x9d); + reg &= 0xf; + reg |= (u8)(tmp & 0xf) << 4; + + ret |= m88rs2000_writereg(state, 0x9d, reg); + + return ret; +} + +static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + u64 temp; + u32 mclk; + u8 b[3]; + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + mclk = m88rs2000_get_mclk(fe); + if (!mclk) + return -EINVAL; + + temp = srate / 1000; + temp *= 1 << 24; + + do_div(temp, mclk); + + b[0] = (u8) (temp >> 16) & 0xff; + b[1] = (u8) (temp >> 8) & 0xff; + b[2] = (u8) temp & 0xff; + + ret = m88rs2000_writereg(state, 0x93, b[2]); + ret |= m88rs2000_writereg(state, 0x94, b[1]); + ret |= m88rs2000_writereg(state, 0x95, b[0]); + + if (srate > 10000000) + ret |= m88rs2000_writereg(state, 0xa0, 0x20); + else + ret |= m88rs2000_writereg(state, 0xa0, 0x60); + + ret |= m88rs2000_writereg(state, 0xa1, 0xe0); + + if (srate > 12000000) + ret |= m88rs2000_writereg(state, 0xa3, 0x20); + else if (srate > 2800000) + ret |= m88rs2000_writereg(state, 0xa3, 0x98); + else + ret |= m88rs2000_writereg(state, 0xa3, 0x90); + + deb_info("m88rs2000: m88rs2000_set_symbolrate\n"); + return ret; +} + +static int m88rs2000_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + int i; + u8 reg; + deb_info("%s\n", __func__); + m88rs2000_writereg(state, 0x9a, 0x30); + reg = m88rs2000_readreg(state, 0xb2); + reg &= 0x3f; + m88rs2000_writereg(state, 0xb2, reg); + for (i = 0; i < m->msg_len; i++) + m88rs2000_writereg(state, 0xb3 + i, m->msg[i]); + + reg = m88rs2000_readreg(state, 0xb1); + reg &= 0x87; + reg |= ((m->msg_len - 1) << 3) | 0x07; + reg &= 0x7f; + m88rs2000_writereg(state, 0xb1, reg); + + for (i = 0; i < 15; i++) { + if ((m88rs2000_readreg(state, 0xb1) & 0x40) == 0x0) + break; + msleep(20); + } + + reg = m88rs2000_readreg(state, 0xb1); + if ((reg & 0x40) > 0x0) { + reg &= 0x7f; + reg |= 0x40; + m88rs2000_writereg(state, 0xb1, reg); + } + + reg = m88rs2000_readreg(state, 0xb2); + reg &= 0x3f; + reg |= 0x80; + m88rs2000_writereg(state, 0xb2, reg); + m88rs2000_writereg(state, 0x9a, 0xb0); + + + return 0; +} + +static int m88rs2000_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg0, reg1; + deb_info("%s\n", __func__); + m88rs2000_writereg(state, 0x9a, 0x30); + msleep(50); + reg0 = m88rs2000_readreg(state, 0xb1); + reg1 = m88rs2000_readreg(state, 0xb2); + /* TODO complete this section */ + m88rs2000_writereg(state, 0xb2, reg1); + m88rs2000_writereg(state, 0xb1, reg0); + m88rs2000_writereg(state, 0x9a, 0xb0); + + return 0; +} + +static int m88rs2000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg0, reg1; + m88rs2000_writereg(state, 0x9a, 0x30); + reg0 = m88rs2000_readreg(state, 0xb1); + reg1 = m88rs2000_readreg(state, 0xb2); + + reg1 &= 0x3f; + + switch (tone) { + case SEC_TONE_ON: + reg0 |= 0x4; + reg0 &= 0xbc; + break; + case SEC_TONE_OFF: + reg1 |= 0x80; + break; + default: + break; + } + m88rs2000_writereg(state, 0xb2, reg1); + m88rs2000_writereg(state, 0xb1, reg0); + m88rs2000_writereg(state, 0x9a, 0xb0); + return 0; +} + +struct inittab { + u8 cmd; + u8 reg; + u8 val; +}; + +struct inittab m88rs2000_setup[] = { + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0x00, 0x01}, + {WRITE_DELAY, 0x19, 0x00}, + {DEMOD_WRITE, 0x00, 0x00}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {DEMOD_WRITE, 0x81, 0xc1}, + {DEMOD_WRITE, 0x81, 0x81}, + {DEMOD_WRITE, 0x86, 0xc6}, + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0xf0, 0x22}, + {DEMOD_WRITE, 0xf1, 0xbf}, + {DEMOD_WRITE, 0xb0, 0x45}, + {DEMOD_WRITE, 0xb2, 0x01}, /* set voltage pin always set 1*/ + {DEMOD_WRITE, 0x9a, 0xb0}, + {0xff, 0xaa, 0xff} +}; + +struct inittab m88rs2000_shutdown[] = { + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0xb0, 0x00}, + {DEMOD_WRITE, 0xf1, 0x89}, + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {DEMOD_WRITE, 0x81, 0x81}, + {0xff, 0xaa, 0xff} +}; + +struct inittab fe_reset[] = { + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x20, 0x81}, + {DEMOD_WRITE, 0x21, 0x80}, + {DEMOD_WRITE, 0x10, 0x33}, + {DEMOD_WRITE, 0x11, 0x44}, + {DEMOD_WRITE, 0x12, 0x07}, + {DEMOD_WRITE, 0x18, 0x20}, + {DEMOD_WRITE, 0x28, 0x04}, + {DEMOD_WRITE, 0x29, 0x8e}, + {DEMOD_WRITE, 0x3b, 0xff}, + {DEMOD_WRITE, 0x32, 0x10}, + {DEMOD_WRITE, 0x33, 0x02}, + {DEMOD_WRITE, 0x34, 0x30}, + {DEMOD_WRITE, 0x35, 0xff}, + {DEMOD_WRITE, 0x38, 0x50}, + {DEMOD_WRITE, 0x39, 0x68}, + {DEMOD_WRITE, 0x3c, 0x7f}, + {DEMOD_WRITE, 0x3d, 0x0f}, + {DEMOD_WRITE, 0x45, 0x20}, + {DEMOD_WRITE, 0x46, 0x24}, + {DEMOD_WRITE, 0x47, 0x7c}, + {DEMOD_WRITE, 0x48, 0x16}, + {DEMOD_WRITE, 0x49, 0x04}, + {DEMOD_WRITE, 0x4a, 0x01}, + {DEMOD_WRITE, 0x4b, 0x78}, + {DEMOD_WRITE, 0X4d, 0xd2}, + {DEMOD_WRITE, 0x4e, 0x6d}, + {DEMOD_WRITE, 0x50, 0x30}, + {DEMOD_WRITE, 0x51, 0x30}, + {DEMOD_WRITE, 0x54, 0x7b}, + {DEMOD_WRITE, 0x56, 0x09}, + {DEMOD_WRITE, 0x58, 0x59}, + {DEMOD_WRITE, 0x59, 0x37}, + {DEMOD_WRITE, 0x63, 0xfa}, + {0xff, 0xaa, 0xff} +}; + +struct inittab fe_trigger[] = { + {DEMOD_WRITE, 0x97, 0x04}, + {DEMOD_WRITE, 0x99, 0x77}, + {DEMOD_WRITE, 0x9b, 0x64}, + {DEMOD_WRITE, 0x9e, 0x00}, + {DEMOD_WRITE, 0x9f, 0xf8}, + {DEMOD_WRITE, 0x98, 0xff}, + {DEMOD_WRITE, 0xc0, 0x0f}, + {DEMOD_WRITE, 0x89, 0x01}, + {DEMOD_WRITE, 0x00, 0x00}, + {WRITE_DELAY, 0x0a, 0x00}, + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x00, 0x00}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {0xff, 0xaa, 0xff} +}; + +static int m88rs2000_tab_set(struct m88rs2000_state *state, + struct inittab *tab) +{ + int ret = 0; + u8 i; + if (tab == NULL) + return -EINVAL; + + for (i = 0; i < 255; i++) { + switch (tab[i].cmd) { + case 0x01: + ret = m88rs2000_writereg(state, tab[i].reg, + tab[i].val); + break; + case 0x10: + if (tab[i].reg > 0) + mdelay(tab[i].reg); + break; + case 0xff: + if (tab[i].reg == 0xaa && tab[i].val == 0xff) + return 0; + case 0x00: + break; + default: + return -EINVAL; + } + if (ret < 0) + return -ENODEV; + } + return 0; +} + +static int m88rs2000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 data; + + data = m88rs2000_readreg(state, 0xb2); + data |= 0x03; /* bit0 V/H, bit1 off/on */ + + switch (volt) { + case SEC_VOLTAGE_18: + data &= ~0x03; + break; + case SEC_VOLTAGE_13: + data &= ~0x03; + data |= 0x01; + break; + case SEC_VOLTAGE_OFF: + break; + } + + m88rs2000_writereg(state, 0xb2, data); + + return 0; +} + +static int m88rs2000_init(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + + deb_info("m88rs2000: init chip\n"); + /* Setup frontend from shutdown/cold */ + if (state->config->inittab) + ret = m88rs2000_tab_set(state, + (struct inittab *)state->config->inittab); + else + ret = m88rs2000_tab_set(state, m88rs2000_setup); + + return ret; +} + +static int m88rs2000_sleep(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + /* Shutdown the frondend */ + ret = m88rs2000_tab_set(state, m88rs2000_shutdown); + return ret; +} + +static int m88rs2000_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg = m88rs2000_readreg(state, 0x8c); + + *status = 0; + + if ((reg & 0x7) == 0x7) { + *status = FE_HAS_CARRIER | FE_HAS_SIGNAL | FE_HAS_VITERBI + | FE_HAS_SYNC | FE_HAS_LOCK; + if (state->config->set_ts_params) + state->config->set_ts_params(fe, CALL_IS_READ); + } + return 0; +} + +static int m88rs2000_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 tmp0, tmp1; + + m88rs2000_writereg(state, 0x9a, 0x30); + tmp0 = m88rs2000_readreg(state, 0xd8); + if ((tmp0 & 0x10) != 0) { + m88rs2000_writereg(state, 0x9a, 0xb0); + *ber = 0xffffffff; + return 0; + } + + *ber = (m88rs2000_readreg(state, 0xd7) << 8) | + m88rs2000_readreg(state, 0xd6); + + tmp1 = m88rs2000_readreg(state, 0xd9); + m88rs2000_writereg(state, 0xd9, (tmp1 & ~7) | 4); + /* needs twice */ + m88rs2000_writereg(state, 0xd8, (tmp0 & ~8) | 0x30); + m88rs2000_writereg(state, 0xd8, (tmp0 & ~8) | 0x30); + m88rs2000_writereg(state, 0x9a, 0xb0); + + return 0; +} + +static int m88rs2000_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + if (fe->ops.tuner_ops.get_rf_strength) + fe->ops.tuner_ops.get_rf_strength(fe, strength); + + return 0; +} + +static int m88rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + *snr = 512 * m88rs2000_readreg(state, 0x65); + + return 0; +} + +static int m88rs2000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 tmp; + + *ucblocks = (m88rs2000_readreg(state, 0xd5) << 8) | + m88rs2000_readreg(state, 0xd4); + tmp = m88rs2000_readreg(state, 0xd8); + m88rs2000_writereg(state, 0xd8, tmp & ~0x20); + /* needs two times */ + m88rs2000_writereg(state, 0xd8, tmp | 0x20); + m88rs2000_writereg(state, 0xd8, tmp | 0x20); + + return 0; +} + +static int m88rs2000_set_fec(struct m88rs2000_state *state, + fe_code_rate_t fec) +{ + u16 fec_set; + switch (fec) { + /* This is not confirmed kept for reference */ +/* case FEC_1_2: + fec_set = 0x88; + break; + case FEC_2_3: + fec_set = 0x68; + break; + case FEC_3_4: + fec_set = 0x48; + break; + case FEC_5_6: + fec_set = 0x28; + break; + case FEC_7_8: + fec_set = 0x18; + break; */ + case FEC_AUTO: + default: + fec_set = 0x08; + } + m88rs2000_writereg(state, 0x76, fec_set); + + return 0; +} + + +static fe_code_rate_t m88rs2000_get_fec(struct m88rs2000_state *state) +{ + u8 reg; + m88rs2000_writereg(state, 0x9a, 0x30); + reg = m88rs2000_readreg(state, 0x76); + m88rs2000_writereg(state, 0x9a, 0xb0); + + switch (reg) { + case 0x88: + return FEC_1_2; + case 0x68: + return FEC_2_3; + case 0x48: + return FEC_3_4; + case 0x28: + return FEC_5_6; + case 0x18: + return FEC_7_8; + case 0x08: + default: + break; + } + + return FEC_AUTO; +} + +static int m88rs2000_set_frontend(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + fe_status_t status; + int i, ret = 0; + u32 tuner_freq; + s16 offset = 0; + u8 reg; + + state->no_lock_count = 0; + + if (c->delivery_system != SYS_DVBS) { + deb_info("%s: unsupported delivery " + "system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + /* Set Tuner */ + if (fe->ops.tuner_ops.set_params) + ret = fe->ops.tuner_ops.set_params(fe); + + if (ret < 0) + return -ENODEV; + + if (fe->ops.tuner_ops.get_frequency) + ret = fe->ops.tuner_ops.get_frequency(fe, &tuner_freq); + + if (ret < 0) + return -ENODEV; + + offset = (s16)((s32)tuner_freq - c->frequency); + + /* default mclk value 96.4285 * 2 * 1000 = 192857 */ + if (((c->frequency % 192857) >= (192857 - 3000)) || + (c->frequency % 192857) <= 3000) + ret = m88rs2000_writereg(state, 0x86, 0xc2); + else + ret = m88rs2000_writereg(state, 0x86, 0xc6); + + ret |= m88rs2000_set_carrieroffset(fe, offset); + if (ret < 0) + return -ENODEV; + + /* Reset demod by symbol rate */ + if (c->symbol_rate > 27500000) + ret = m88rs2000_writereg(state, 0xf1, 0xa4); + else + ret = m88rs2000_writereg(state, 0xf1, 0xbf); + + ret |= m88rs2000_tab_set(state, fe_reset); + if (ret < 0) + return -ENODEV; + + /* Unknown */ + reg = m88rs2000_readreg(state, 0x70); + ret = m88rs2000_writereg(state, 0x70, reg); + + /* Set FEC */ + ret |= m88rs2000_set_fec(state, c->fec_inner); + ret |= m88rs2000_writereg(state, 0x85, 0x1); + ret |= m88rs2000_writereg(state, 0x8a, 0xbf); + ret |= m88rs2000_writereg(state, 0x8d, 0x1e); + ret |= m88rs2000_writereg(state, 0x90, 0xf1); + ret |= m88rs2000_writereg(state, 0x91, 0x08); + + if (ret < 0) + return -ENODEV; + + /* Set Symbol Rate */ + ret = m88rs2000_set_symbolrate(fe, c->symbol_rate); + if (ret < 0) + return -ENODEV; + + /* Set up Demod */ + ret = m88rs2000_tab_set(state, fe_trigger); + if (ret < 0) + return -ENODEV; + + for (i = 0; i < 25; i++) { + reg = m88rs2000_readreg(state, 0x8c); + if ((reg & 0x7) == 0x7) { + status = FE_HAS_LOCK; + break; + } + state->no_lock_count++; + if (state->no_lock_count == 15) { + reg = m88rs2000_readreg(state, 0x70); + reg ^= 0x4; + m88rs2000_writereg(state, 0x70, reg); + state->no_lock_count = 0; + } + msleep(20); + } + + if (status & FE_HAS_LOCK) { + state->fec_inner = m88rs2000_get_fec(state); + /* Uknown suspect SNR level */ + reg = m88rs2000_readreg(state, 0x65); + } + + state->tuner_frequency = c->frequency; + state->symbol_rate = c->symbol_rate; + return 0; +} + +static int m88rs2000_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct m88rs2000_state *state = fe->demodulator_priv; + c->fec_inner = state->fec_inner; + c->frequency = state->tuner_frequency; + c->symbol_rate = state->symbol_rate; + return 0; +} + +static int m88rs2000_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + if (c->symbol_rate > 3000000) + tune->min_delay_ms = 2000; + else + tune->min_delay_ms = 3000; + + tune->step_size = c->symbol_rate / 16000; + tune->max_drift = c->symbol_rate / 2000; + + return 0; +} + +static int m88rs2000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + if (enable) + m88rs2000_writereg(state, 0x81, 0x84); + else + m88rs2000_writereg(state, 0x81, 0x81); + udelay(10); + return 0; +} + +static void m88rs2000_release(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops m88rs2000_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "M88RS2000 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, /* kHz for QPSK frontends */ + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_AUTO + }, + + .release = m88rs2000_release, + .init = m88rs2000_init, + .sleep = m88rs2000_sleep, + .i2c_gate_ctrl = m88rs2000_i2c_gate_ctrl, + .read_status = m88rs2000_read_status, + .read_ber = m88rs2000_read_ber, + .read_signal_strength = m88rs2000_read_signal_strength, + .read_snr = m88rs2000_read_snr, + .read_ucblocks = m88rs2000_read_ucblocks, + .diseqc_send_master_cmd = m88rs2000_send_diseqc_msg, + .diseqc_send_burst = m88rs2000_send_diseqc_burst, + .set_tone = m88rs2000_set_tone, + .set_voltage = m88rs2000_set_voltage, + + .set_frontend = m88rs2000_set_frontend, + .get_frontend = m88rs2000_get_frontend, + .get_tune_settings = m88rs2000_get_tune_settings, +}; + +struct dvb_frontend *m88rs2000_attach(const struct m88rs2000_config *config, + struct i2c_adapter *i2c) +{ + struct m88rs2000_state *state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct m88rs2000_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->tuner_frequency = 0; + state->symbol_rate = 0; + state->fec_inner = 0; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &m88rs2000_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + + return NULL; +} +EXPORT_SYMBOL(m88rs2000_attach); + +MODULE_DESCRIPTION("M88RS2000 DVB-S Demodulator driver"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.13"); + diff --git a/drivers/media/dvb-frontends/m88rs2000.h b/drivers/media/dvb-frontends/m88rs2000.h new file mode 100644 index 00000000..0a50ea90 --- /dev/null +++ b/drivers/media/dvb-frontends/m88rs2000.h @@ -0,0 +1,62 @@ +/* + Driver for M88RS2000 demodulator + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef M88RS2000_H +#define M88RS2000_H + +#include +#include +#include "dvb_frontend.h" + +struct m88rs2000_config { + /* Demodulator i2c address */ + u8 demod_addr; + + u8 *inittab; + + /* minimum delay before retuning */ + int min_delay_ms; + + int (*set_ts_params)(struct dvb_frontend *, int); +}; + +enum { + CALL_IS_SET_FRONTEND = 0x0, + CALL_IS_READ, +}; + +#if IS_ENABLED(CONFIG_DVB_M88RS2000) +extern struct dvb_frontend *m88rs2000_attach( + const struct m88rs2000_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *m88rs2000_attach( + const struct m88rs2000_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_M88RS2000 */ + +#define RS2000_FE_CRYSTAL_KHZ 27000 + +enum { + DEMOD_WRITE = 0x1, + WRITE_DELAY = 0x10, +}; +#endif /* M88RS2000_H */ diff --git a/drivers/media/dvb-frontends/mb86a16.c b/drivers/media/dvb-frontends/mb86a16.c new file mode 100644 index 00000000..9ae40abf --- /dev/null +++ b/drivers/media/dvb-frontends/mb86a16.c @@ -0,0 +1,1878 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "mb86a16.h" +#include "mb86a16_priv.h" + +unsigned int verbose = 5; +module_param(verbose, int, 0644); + +#define ABS(x) ((x) < 0 ? (-x) : (x)) + +struct mb86a16_state { + struct i2c_adapter *i2c_adap; + const struct mb86a16_config *config; + struct dvb_frontend frontend; + + /* tuning parameters */ + int frequency; + int srate; + + /* Internal stuff */ + int master_clk; + int deci; + int csel; + int rsel; +}; + +#define MB86A16_ERROR 0 +#define MB86A16_NOTICE 1 +#define MB86A16_INFO 2 +#define MB86A16_DEBUG 3 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((x > MB86A16_ERROR) && (x > y)) \ + printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_NOTICE) && (x > y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_INFO) && (x > y)) \ + printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_DEBUG) && (x > y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \ + } else { \ + if (x > y) \ + printk(format, ##arg); \ + } \ +} while (0) + +#define TRACE_IN dprintk(verbose, MB86A16_DEBUG, 1, "-->()") +#define TRACE_OUT dprintk(verbose, MB86A16_DEBUG, 1, "()-->") + +static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val) +{ + int ret; + u8 buf[] = { reg, val }; + + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + dprintk(verbose, MB86A16_DEBUG, 1, + "writing to [0x%02x],Reg[0x%02x],Data[0x%02x]", + state->config->demod_address, buf[0], buf[1]); + + ret = i2c_transfer(state->i2c_adap, &msg, 1); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + ret = i2c_transfer(state->i2c_adap, msg, 2); + if (ret != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)", + reg, ret); + + return -EREMOTEIO; + } + *val = b1[0]; + + return ret; +} + +static int CNTM_set(struct mb86a16_state *state, + unsigned char timint1, + unsigned char timint2, + unsigned char cnext) +{ + unsigned char val; + + val = (timint1 << 4) | (timint2 << 2) | cnext; + if (mb86a16_write(state, MB86A16_CNTMR, val) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int smrt_set(struct mb86a16_state *state, int rate) +{ + int tmp ; + int m ; + unsigned char STOFS0, STOFS1; + + m = 1 << state->deci; + tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk; + + STOFS0 = tmp & 0x0ff; + STOFS1 = (tmp & 0xf00) >> 8; + + if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) | + (state->csel << 1) | + state->rsel) < 0) + goto err; + if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0) + goto err; + if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -1; +} + +static int srst(struct mb86a16_state *state) +{ + if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + +} + +static int afcex_data_set(struct mb86a16_state *state, + unsigned char AFCEX_L, + unsigned char AFCEX_H) +{ + if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0) + goto err; + if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + + return -1; +} + +static int afcofs_data_set(struct mb86a16_state *state, + unsigned char AFCEX_L, + unsigned char AFCEX_H) +{ + if (mb86a16_write(state, 0x58, AFCEX_L) < 0) + goto err; + if (mb86a16_write(state, 0x59, AFCEX_H) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int stlp_set(struct mb86a16_state *state, + unsigned char STRAS, + unsigned char STRBS) +{ + if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA) +{ + if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0) + goto err; + if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int initial_set(struct mb86a16_state *state) +{ + if (stlp_set(state, 5, 7)) + goto err; + + udelay(100); + if (afcex_data_set(state, 0, 0)) + goto err; + + udelay(100); + if (afcofs_data_set(state, 0, 0)) + goto err; + + udelay(100); + if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0) + goto err; + if (mb86a16_write(state, 0x2f, 0x21) < 0) + goto err; + if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0) + goto err; + if (mb86a16_write(state, 0x54, 0xff) < 0) + goto err; + if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int S01T_set(struct mb86a16_state *state, + unsigned char s1t, + unsigned s0t) +{ + if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + + +static int EN_set(struct mb86a16_state *state, + int cren, + int afcen) +{ + unsigned char val; + + val = 0x7a | (cren << 7) | (afcen << 2); + if (mb86a16_write(state, 0x49, val) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int AFCEXEN_set(struct mb86a16_state *state, + int afcexen, + int smrt) +{ + unsigned char AFCA ; + + if (smrt > 18875) + AFCA = 4; + else if (smrt > 9375) + AFCA = 3; + else if (smrt > 2250) + AFCA = 2; + else + AFCA = 1; + + if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int DAGC_data_set(struct mb86a16_state *state, + unsigned char DAGCA, + unsigned char DAGCW) +{ + if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static void smrt_info_get(struct mb86a16_state *state, int rate) +{ + if (rate >= 37501) { + state->deci = 0; state->csel = 0; state->rsel = 0; + } else if (rate >= 30001) { + state->deci = 0; state->csel = 0; state->rsel = 1; + } else if (rate >= 26251) { + state->deci = 0; state->csel = 1; state->rsel = 0; + } else if (rate >= 22501) { + state->deci = 0; state->csel = 1; state->rsel = 1; + } else if (rate >= 18751) { + state->deci = 1; state->csel = 0; state->rsel = 0; + } else if (rate >= 15001) { + state->deci = 1; state->csel = 0; state->rsel = 1; + } else if (rate >= 13126) { + state->deci = 1; state->csel = 1; state->rsel = 0; + } else if (rate >= 11251) { + state->deci = 1; state->csel = 1; state->rsel = 1; + } else if (rate >= 9376) { + state->deci = 2; state->csel = 0; state->rsel = 0; + } else if (rate >= 7501) { + state->deci = 2; state->csel = 0; state->rsel = 1; + } else if (rate >= 6563) { + state->deci = 2; state->csel = 1; state->rsel = 0; + } else if (rate >= 5626) { + state->deci = 2; state->csel = 1; state->rsel = 1; + } else if (rate >= 4688) { + state->deci = 3; state->csel = 0; state->rsel = 0; + } else if (rate >= 3751) { + state->deci = 3; state->csel = 0; state->rsel = 1; + } else if (rate >= 3282) { + state->deci = 3; state->csel = 1; state->rsel = 0; + } else if (rate >= 2814) { + state->deci = 3; state->csel = 1; state->rsel = 1; + } else if (rate >= 2344) { + state->deci = 4; state->csel = 0; state->rsel = 0; + } else if (rate >= 1876) { + state->deci = 4; state->csel = 0; state->rsel = 1; + } else if (rate >= 1641) { + state->deci = 4; state->csel = 1; state->rsel = 0; + } else if (rate >= 1407) { + state->deci = 4; state->csel = 1; state->rsel = 1; + } else if (rate >= 1172) { + state->deci = 5; state->csel = 0; state->rsel = 0; + } else if (rate >= 939) { + state->deci = 5; state->csel = 0; state->rsel = 1; + } else if (rate >= 821) { + state->deci = 5; state->csel = 1; state->rsel = 0; + } else { + state->deci = 5; state->csel = 1; state->rsel = 1; + } + + if (state->csel == 0) + state->master_clk = 92000; + else + state->master_clk = 61333; + +} + +static int signal_det(struct mb86a16_state *state, + int smrt, + unsigned char *SIG) +{ + + int ret ; + int smrtd ; + int wait_sym ; + + u32 wait_t; + unsigned char S[3] ; + int i ; + + if (*SIG > 45) { + if (CNTM_set(state, 2, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + wait_sym = 40000; + } else { + if (CNTM_set(state, 3, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + wait_sym = 80000; + } + for (i = 0; i < 3; i++) { + if (i == 0) + smrtd = smrt * 98 / 100; + else if (i == 1) + smrtd = smrt; + else + smrtd = smrt * 102 / 100; + smrt_info_get(state, smrtd); + smrt_set(state, smrtd); + srst(state); + wait_t = (wait_sym + 99 * smrtd / 100) / smrtd; + if (wait_t == 0) + wait_t = 1; + msleep_interruptible(10); + if (mb86a16_read(state, 0x37, &(S[i])) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + } + if ((S[1] > S[0] * 112 / 100) && + (S[1] > S[2] * 112 / 100)) { + + ret = 1; + } else { + ret = 0; + } + *SIG = S[1]; + + if (CNTM_set(state, 0, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + + return ret; +} + +static int rf_val_set(struct mb86a16_state *state, + int f, + int smrt, + unsigned char R) +{ + unsigned char C, F, B; + int M; + unsigned char rf_val[5]; + int ack = -1; + + if (smrt > 37750) + C = 1; + else if (smrt > 18875) + C = 2; + else if (smrt > 5500) + C = 3; + else + C = 4; + + if (smrt > 30500) + F = 3; + else if (smrt > 9375) + F = 1; + else if (smrt > 4625) + F = 0; + else + F = 2; + + if (f < 1060) + B = 0; + else if (f < 1175) + B = 1; + else if (f < 1305) + B = 2; + else if (f < 1435) + B = 3; + else if (f < 1570) + B = 4; + else if (f < 1715) + B = 5; + else if (f < 1845) + B = 6; + else if (f < 1980) + B = 7; + else if (f < 2080) + B = 8; + else + B = 9; + + M = f * (1 << R) / 2; + + rf_val[0] = 0x01 | (C << 3) | (F << 1); + rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12); + rf_val[2] = (M & 0x00ff0) >> 4; + rf_val[3] = ((M & 0x0000f) << 4) | B; + + /* Frequency Set */ + if (mb86a16_write(state, 0x21, rf_val[0]) < 0) + ack = 0; + if (mb86a16_write(state, 0x22, rf_val[1]) < 0) + ack = 0; + if (mb86a16_write(state, 0x23, rf_val[2]) < 0) + ack = 0; + if (mb86a16_write(state, 0x24, rf_val[3]) < 0) + ack = 0; + if (mb86a16_write(state, 0x25, 0x01) < 0) + ack = 0; + if (ack == 0) { + dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int afcerr_chk(struct mb86a16_state *state) +{ + unsigned char AFCM_L, AFCM_H ; + int AFCM ; + int afcm, afcerr ; + + if (mb86a16_read(state, 0x0e, &AFCM_L) != 2) + goto err; + if (mb86a16_read(state, 0x0f, &AFCM_H) != 2) + goto err; + + AFCM = (AFCM_H << 8) + AFCM_L; + + if (AFCM > 2048) + afcm = AFCM - 4096; + else + afcm = AFCM; + afcerr = afcm * state->master_clk / 8192; + + return afcerr; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int dagcm_val_get(struct mb86a16_state *state) +{ + int DAGCM; + unsigned char DAGCM_H, DAGCM_L; + + if (mb86a16_read(state, 0x45, &DAGCM_L) != 2) + goto err; + if (mb86a16_read(state, 0x46, &DAGCM_H) != 2) + goto err; + + DAGCM = (DAGCM_H << 8) + DAGCM_L; + + return DAGCM; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + u8 stat, stat2; + struct mb86a16_state *state = fe->demodulator_priv; + + *status = 0; + + if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2) + goto err; + if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2) + goto err; + if ((stat > 25) && (stat2 > 25)) + *status |= FE_HAS_SIGNAL; + if ((stat > 45) && (stat2 > 45)) + *status |= FE_HAS_CARRIER; + + if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2) + goto err; + + if (stat & 0x01) + *status |= FE_HAS_SYNC; + if (stat & 0x01) + *status |= FE_HAS_VITERBI; + + if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2) + goto err; + + if ((stat & 0x0f) && (*status & FE_HAS_VITERBI)) + *status |= FE_HAS_LOCK; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int sync_chk(struct mb86a16_state *state, + unsigned char *VIRM) +{ + unsigned char val; + int sync; + + if (mb86a16_read(state, 0x0d, &val) != 2) + goto err; + + dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val); + sync = val & 0x01; + *VIRM = (val & 0x1c) >> 2; + + return sync; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + +} + +static int freqerr_chk(struct mb86a16_state *state, + int fTP, + int smrt, + int unit) +{ + unsigned char CRM, AFCML, AFCMH; + unsigned char temp1, temp2, temp3; + int crm, afcm, AFCM; + int crrerr, afcerr; /* kHz */ + int frqerr; /* MHz */ + int afcen, afcexen = 0; + int R, M, fOSC, fOSC_OFS; + + if (mb86a16_read(state, 0x43, &CRM) != 2) + goto err; + + if (CRM > 127) + crm = CRM - 256; + else + crm = CRM; + + crrerr = smrt * crm / 256; + if (mb86a16_read(state, 0x49, &temp1) != 2) + goto err; + + afcen = (temp1 & 0x04) >> 2; + if (afcen == 0) { + if (mb86a16_read(state, 0x2a, &temp1) != 2) + goto err; + afcexen = (temp1 & 0x20) >> 5; + } + + if (afcen == 1) { + if (mb86a16_read(state, 0x0e, &AFCML) != 2) + goto err; + if (mb86a16_read(state, 0x0f, &AFCMH) != 2) + goto err; + } else if (afcexen == 1) { + if (mb86a16_read(state, 0x2b, &AFCML) != 2) + goto err; + if (mb86a16_read(state, 0x2c, &AFCMH) != 2) + goto err; + } + if ((afcen == 1) || (afcexen == 1)) { + smrt_info_get(state, smrt); + AFCM = ((AFCMH & 0x01) << 8) + AFCML; + if (AFCM > 255) + afcm = AFCM - 512; + else + afcm = AFCM; + + afcerr = afcm * state->master_clk / 8192; + } else + afcerr = 0; + + if (mb86a16_read(state, 0x22, &temp1) != 2) + goto err; + if (mb86a16_read(state, 0x23, &temp2) != 2) + goto err; + if (mb86a16_read(state, 0x24, &temp3) != 2) + goto err; + + R = (temp1 & 0xe0) >> 5; + M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4); + if (R == 0) + fOSC = 2 * M; + else + fOSC = M; + + fOSC_OFS = fOSC - fTP; + + if (unit == 0) { /* MHz */ + if (crrerr + afcerr + fOSC_OFS * 1000 >= 0) + frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000; + else + frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000; + } else { /* kHz */ + frqerr = crrerr + afcerr + fOSC_OFS * 1000; + } + + return frqerr; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt) +{ + unsigned char R; + + if (smrt > 9375) + R = 0; + else + R = 1; + + return R; +} + +static void swp_info_get(struct mb86a16_state *state, + int fOSC_start, + int smrt, + int v, int R, + int swp_ofs, + int *fOSC, + int *afcex_freq, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + int crnt_swp_freq ; + + crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs; + + if (R == 0) + *fOSC = (crnt_swp_freq + 1000) / 2000 * 2; + else + *fOSC = (crnt_swp_freq + 500) / 1000; + + if (*fOSC >= crnt_swp_freq) + *afcex_freq = *fOSC * 1000 - crnt_swp_freq; + else + *afcex_freq = crnt_swp_freq - *fOSC * 1000; + + AFCEX = *afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + + +static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V, int vmax, int vmin, + int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1) +{ + int swp_freq ; + + if ((i % 2 == 1) && (v <= vmax)) { + /* positive v (case 1) */ + if ((v - 1 == vmin) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v - 1) > *(V + 30 + v)) && + (*(V + 30 + v - 1) > SIGMIN)) { + + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } else if ((v == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v) > *(V + 30 + v - 1)) && + (*(V + 30 + v) > SIGMIN)) { + /* (case 2) */ + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else if ((*(V + 30 + v) > 0) && + (*(V + 30 + v - 1) > 0) && + (*(V + 30 + v - 2) > 0) && + (*(V + 30 + v - 3) > 0) && + (*(V + 30 + v - 1) > *(V + 30 + v)) && + (*(V + 30 + v - 2) > *(V + 30 + v - 3)) && + ((*(V + 30 + v - 1) > SIGMIN) || + (*(V + 30 + v - 2) > SIGMIN))) { + /* (case 3) */ + if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2; + *SIG1 = *(V + 30 + v - 2); + } + } else if ((v == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v - 2) >= 0) && + (*(V + 30 + v) > *(V + 30 + v - 2)) && + (*(V + 30 + v - 1) > *(V + 30 + v - 2)) && + ((*(V + 30 + v) > SIGMIN) || + (*(V + 30 + v - 1) > SIGMIN))) { + /* (case 4) */ + if (*(V + 30 + v) >= *(V + 30 + v - 1)) { + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } + } else { + swp_freq = -1 ; + } + } else if ((i % 2 == 0) && (v >= vmin)) { + /* Negative v (case 1) */ + if ((*(V + 30 + v) > 0) && + (*(V + 30 + v + 1) > 0) && + (*(V + 30 + v + 2) > 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 2)) && + (*(V + 30 + v + 1) > SIGMIN)) { + + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else if ((v + 1 == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 1) > SIGMIN)) { + /* (case 2) */ + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v); + } else if ((v == vmin) && + (*(V + 30 + v) > 0) && + (*(V + 30 + v + 1) > 0) && + (*(V + 30 + v + 2) > 0) && + (*(V + 30 + v) > *(V + 30 + v + 1)) && + (*(V + 30 + v) > *(V + 30 + v + 2)) && + (*(V + 30 + v) > SIGMIN)) { + /* (case 3) */ + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else if ((*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 3) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 2) > *(V + 30 + v + 3)) && + ((*(V + 30 + v + 1) > SIGMIN) || + (*(V + 30 + v + 2) > SIGMIN))) { + /* (case 4) */ + if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2; + *SIG1 = *(V + 30 + v + 2); + } + } else if ((*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 3) >= 0) && + (*(V + 30 + v) > *(V + 30 + v + 2)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 2)) && + (*(V + 30 + v) > *(V + 30 + v + 3)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 3)) && + ((*(V + 30 + v) > SIGMIN) || + (*(V + 30 + v + 1) > SIGMIN))) { + /* (case 5) */ + if (*(V + 30 + v) >= *(V + 30 + v + 1)) { + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } + } else if ((v + 2 == vmin) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 2) > *(V + 30 + v)) && + ((*(V + 30 + v + 1) > SIGMIN) || + (*(V + 30 + v + 2) > SIGMIN))) { + /* (case 6) */ + if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2; + *SIG1 = *(V + 30 + v + 2); + } + } else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) { + swp_freq = fOSC * 1000; + *SIG1 = *(V + 30 + v); + } else + swp_freq = -1; + } else + swp_freq = -1; + + return swp_freq; +} + +static void swp_info_get2(struct mb86a16_state *state, + int smrt, + int R, + int swp_freq, + int *afcex_freq, + int *fOSC, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + + if (R == 0) + *fOSC = (swp_freq + 1000) / 2000 * 2; + else + *fOSC = (swp_freq + 500) / 1000; + + if (*fOSC >= swp_freq) + *afcex_freq = *fOSC * 1000 - swp_freq; + else + *afcex_freq = swp_freq - *fOSC * 1000; + + AFCEX = *afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + +static void afcex_info_get(struct mb86a16_state *state, + int afcex_freq, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + + AFCEX = afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + +static int SEQ_set(struct mb86a16_state *state, unsigned char loop) +{ + /* SLOCK0 = 0 */ + if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV) +{ + /* Viterbi Rate, IQ Settings */ + if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int FEC_srst(struct mb86a16_state *state) +{ + if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int S2T_set(struct mb86a16_state *state, unsigned char S2T) +{ + if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T) +{ + if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + + +static int mb86a16_set_fe(struct mb86a16_state *state) +{ + u8 agcval, cnmval; + + int i, j; + int fOSC = 0; + int fOSC_start = 0; + int wait_t; + int fcp; + int swp_ofs; + int V[60]; + u8 SIG1MIN; + + unsigned char CREN, AFCEN, AFCEXEN; + unsigned char SIG1; + unsigned char TIMINT1, TIMINT2, TIMEXT; + unsigned char S0T, S1T; + unsigned char S2T; +/* unsigned char S2T, S3T; */ + unsigned char S4T, S5T; + unsigned char AFCEX_L, AFCEX_H; + unsigned char R; + unsigned char VIRM; + unsigned char ETH, VIA; + unsigned char junk; + + int loop; + int ftemp; + int v, vmax, vmin; + int vmax_his, vmin_his; + int swp_freq, prev_swp_freq[20]; + int prev_freq_num; + int signal_dupl; + int afcex_freq; + int signal; + int afcerr; + int temp_freq, delta_freq; + int dagcm[4]; + int smrt_d; +/* int freq_err; */ + int n; + int ret = -1; + int sync; + + dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate); + + fcp = 3000; + swp_ofs = state->srate / 4; + + for (i = 0; i < 60; i++) + V[i] = -1; + + for (i = 0; i < 20; i++) + prev_swp_freq[i] = 0; + + SIG1MIN = 25; + + for (n = 0; ((n < 3) && (ret == -1)); n++) { + SEQ_set(state, 0); + iq_vt_set(state, 0); + + CREN = 0; + AFCEN = 0; + AFCEXEN = 1; + TIMINT1 = 0; + TIMINT2 = 1; + TIMEXT = 2; + S1T = 0; + S0T = 0; + + if (initial_set(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "initial set failed"); + return -1; + } + if (DAGC_data_set(state, 3, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; /* (0, 0) */ + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; /* (1, smrt) = (1, symbolrate) */ + } + if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error"); + return -1; /* (0, 1, 2) */ + } + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; /* (0, 0) */ + } + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error"); + return -1; + } + + R = vco_dev_get(state, state->srate); + if (R == 1) + fOSC_start = state->frequency; + + else if (R == 0) { + if (state->frequency % 2 == 0) { + fOSC_start = state->frequency; + } else { + fOSC_start = state->frequency + 1; + if (fOSC_start > 2150) + fOSC_start = state->frequency - 1; + } + } + loop = 1; + ftemp = fOSC_start * 1000; + vmax = 0 ; + while (loop == 1) { + ftemp = ftemp + swp_ofs; + vmax++; + + /* Upper bound */ + if (ftemp > 2150000) { + loop = 0; + vmax--; + } else { + if ((ftemp == 2150000) || + (ftemp - state->frequency * 1000 >= fcp + state->srate / 4)) + loop = 0; + } + } + + loop = 1; + ftemp = fOSC_start * 1000; + vmin = 0 ; + while (loop == 1) { + ftemp = ftemp - swp_ofs; + vmin--; + + /* Lower bound */ + if (ftemp < 950000) { + loop = 0; + vmin++; + } else { + if ((ftemp == 950000) || + (state->frequency * 1000 - ftemp >= fcp + state->srate / 4)) + loop = 0; + } + } + + wait_t = (8000 + state->srate / 2) / state->srate; + if (wait_t == 0) + wait_t = 1; + + i = 0; + j = 0; + prev_freq_num = 0; + loop = 1; + signal = 0; + vmax_his = 0; + vmin_his = 0; + v = 0; + + while (loop == 1) { + swp_info_get(state, fOSC_start, state->srate, + v, R, swp_ofs, &fOSC, + &afcex_freq, &AFCEX_L, &AFCEX_H); + + udelay(100); + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + udelay(100); + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + msleep_interruptible(wait_t); + + if (mb86a16_read(state, 0x37, &SIG1) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -1; + } + V[30 + v] = SIG1 ; + swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin, + SIG1MIN, fOSC, afcex_freq, + swp_ofs, &SIG1); /* changed */ + + signal_dupl = 0; + for (j = 0; j < prev_freq_num; j++) { + if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) { + signal_dupl = 1; + dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j); + } + } + if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) { + dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate); + prev_swp_freq[prev_freq_num] = swp_freq; + prev_freq_num++; + swp_info_get2(state, state->srate, R, swp_freq, + &afcex_freq, &fOSC, + &AFCEX_L, &AFCEX_H); + + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + signal = signal_det(state, state->srate, &SIG1); + if (signal == 1) { + dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****"); + loop = 0; + } else { + dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again..."); + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + } + } + if (v > vmax) + vmax_his = 1 ; + if (v < vmin) + vmin_his = 1 ; + i++; + + if ((i % 2 == 1) && (vmax_his == 1)) + i++; + if ((i % 2 == 0) && (vmin_his == 1)) + i++; + + if (i % 2 == 1) + v = (i + 1) / 2; + else + v = -i / 2; + + if ((vmax_his == 1) && (vmin_his == 1)) + loop = 0 ; + } + + if (signal == 1) { + dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check"); + S1T = 7 ; + S0T = 1 ; + CREN = 0 ; + AFCEN = 1 ; + AFCEXEN = 0 ; + + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; + } + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H); + if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + /* delay 4~200 */ + wait_t = 200000 / state->master_clk + 200000 / state->srate; + msleep(wait_t); + afcerr = afcerr_chk(state); + if (afcerr == -1) + return -1; + + swp_freq = fOSC * 1000 + afcerr ; + AFCEXEN = 1 ; + if (state->srate >= 1500) + smrt_d = state->srate / 3; + else + smrt_d = state->srate / 2; + smrt_info_get(state, smrt_d); + if (smrt_set(state, smrt_d) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + R = vco_dev_get(state, smrt_d); + if (DAGC_data_set(state, 2, 0) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + for (i = 0; i < 3; i++) { + temp_freq = swp_freq + (i - 1) * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[i] = dagcm_val_get(state); + } + if ((dagcm[0] > dagcm[1]) && + (dagcm[0] > dagcm[2]) && + (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) { + + temp_freq = swp_freq - 2 * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[3] = dagcm_val_get(state); + if (dagcm[3] > dagcm[1]) + delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300; + else + delta_freq = 0; + } else if ((dagcm[2] > dagcm[1]) && + (dagcm[2] > dagcm[0]) && + (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) { + + temp_freq = swp_freq + 2 * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[3] = dagcm_val_get(state); + if (dagcm[3] > dagcm[1]) + delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300; + else + delta_freq = 0 ; + + } else { + delta_freq = 0 ; + } + dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq); + swp_freq += delta_freq; + dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq); + if (ABS(state->frequency * 1000 - swp_freq) > 3800) { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL !"); + } else { + + S1T = 0; + S0T = 3; + CREN = 1; + AFCEN = 0; + AFCEXEN = 1; + + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; + } + if (DAGC_data_set(state, 0, 0) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + R = vco_dev_get(state, state->srate); + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + wait_t = 7 + (10000 + state->srate / 2) / state->srate; + if (wait_t == 0) + wait_t = 1; + msleep_interruptible(wait_t); + if (mb86a16_read(state, 0x37, &SIG1) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + if (SIG1 > 110) { + S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6; + wait_t = 7 + (917504 + state->srate / 2) / state->srate; + } else if (SIG1 > 105) { + S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1048576 + state->srate / 2) / state->srate; + } else if (SIG1 > 85) { + S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1310720 + state->srate / 2) / state->srate; + } else if (SIG1 > 65) { + S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1572864 + state->srate / 2) / state->srate; + } else { + S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (2097152 + state->srate / 2) / state->srate; + } + wait_t *= 2; /* FOS */ + S2T_set(state, S2T); + S45T_set(state, S4T, S5T); + Vi_set(state, ETH, VIA); + srst(state); + msleep_interruptible(wait_t); + sync = sync_chk(state, &VIRM); + dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync); + if (VIRM) { + if (VIRM == 4) { + /* 5/6 */ + if (SIG1 > 110) + wait_t = (786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + if (state->srate < 5000) + /* FIXME ! , should be a long wait ! */ + msleep_interruptible(wait_t); + else + msleep_interruptible(wait_t); + + if (sync_chk(state, &junk) == 0) { + iq_vt_set(state, 1); + FEC_srst(state); + } + } + /* 1/2, 2/3, 3/4, 7/8 */ + if (SIG1 > 110) + wait_t = (786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + msleep_interruptible(wait_t); + SEQ_set(state, 1); + } else { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC"); + SEQ_set(state, 1); + ret = -1; + } + } + } else { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); + ret = -1; + } + + sync = sync_chk(state, &junk); + if (sync) { + dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******"); + freqerr_chk(state, state->frequency, state->srate, 1); + ret = 0; + break; + } + } + + mb86a16_read(state, 0x15, &agcval); + mb86a16_read(state, 0x26, &cnmval); + dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval); + + return ret; +} + +static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) +{ + struct mb86a16_state *state = fe->demodulator_priv; + int i; + u8 regs; + + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0) + goto err; + + regs = 0x18; + + if (cmd->msg_len > 5 || cmd->msg_len < 4) + return -EINVAL; + + for (i = 0; i < cmd->msg_len; i++) { + if (mb86a16_write(state, regs, cmd->msg[i]) < 0) + goto err; + + regs++; + } + i += 0x90; + + msleep_interruptible(10); + + if (mb86a16_write(state, MB86A16_DCC1, i) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + switch (burst) { + case SEC_MINI_A: + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_TBEN | + MB86A16_DCC1_TBO) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + case SEC_MINI_B: + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_TBEN) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + } + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + switch (tone) { + case SEC_TONE_ON: + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_CTOE) < 0) + + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + case SEC_TONE_OFF: + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0) + goto err; + break; + default: + return -EINVAL; + } + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct mb86a16_state *state = fe->demodulator_priv; + + state->frequency = p->frequency / 1000; + state->srate = p->symbol_rate / 1000; + + if (!mb86a16_set_fe(state)) { + dprintk(verbose, MB86A16_ERROR, 1, "Successfully acquired LOCK"); + return DVBFE_ALGO_SEARCH_SUCCESS; + } + + dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!"); + return DVBFE_ALGO_SEARCH_FAILED; +} + +static void mb86a16_release(struct dvb_frontend *fe) +{ + struct mb86a16_state *state = fe->demodulator_priv; + kfree(state); +} + +static int mb86a16_init(struct dvb_frontend *fe) +{ + return 0; +} + +static int mb86a16_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst; + u32 timer; + + struct mb86a16_state *state = fe->demodulator_priv; + + *ber = 0; + if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2) + goto err; + /* BER monitor invalid when BER_EN = 0 */ + if (ber_mon & 0x04) { + /* coarse, fast calculation */ + *ber = ber_tab & 0x1f; + dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber); + if (ber_mon & 0x01) { + /* + * BER_SEL = 1, The monitored BER is the estimated + * value with a Reed-Solomon decoder error amount at + * the deinterleaver output. + * monitored BER is expressed as a 20 bit output in total + */ + ber_rst = ber_mon >> 3; + *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb; + if (ber_rst == 0) + timer = 12500000; + if (ber_rst == 1) + timer = 25000000; + if (ber_rst == 2) + timer = 50000000; + if (ber_rst == 3) + timer = 100000000; + + *ber /= timer; + dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber); + } else { + /* + * BER_SEL = 0, The monitored BER is the estimated + * value with a Viterbi decoder error amount at the + * QPSK demodulator output. + * monitored BER is expressed as a 24 bit output in total + */ + ber_tim = ber_mon >> 1; + *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb; + if (ber_tim == 0) + timer = 16; + if (ber_tim == 1) + timer = 24; + + *ber /= 2 ^ timer; + dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber); + } + } + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + u8 agcm = 0; + struct mb86a16_state *state = fe->demodulator_priv; + + *strength = 0; + if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + *strength = ((0xff - agcm) * 100) / 256; + dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength); + *strength = (0xffff - 0xff) + agcm; + + return 0; +} + +struct cnr { + u8 cn_reg; + u8 cn_val; +}; + +static const struct cnr cnr_tab[] = { + { 35, 2 }, + { 40, 3 }, + { 50, 4 }, + { 60, 5 }, + { 70, 6 }, + { 80, 7 }, + { 92, 8 }, + { 103, 9 }, + { 115, 10 }, + { 138, 12 }, + { 162, 15 }, + { 180, 18 }, + { 185, 19 }, + { 189, 20 }, + { 195, 22 }, + { 199, 24 }, + { 201, 25 }, + { 202, 26 }, + { 203, 27 }, + { 205, 28 }, + { 208, 30 } +}; + +static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct mb86a16_state *state = fe->demodulator_priv; + int i = 0; + int low_tide = 2, high_tide = 30, q_level; + u8 cn; + + *snr = 0; + if (mb86a16_read(state, 0x26, &cn) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) { + if (cn < cnr_tab[i].cn_reg) { + *snr = cnr_tab[i].cn_val; + break; + } + } + q_level = (*snr * 100) / (high_tide - low_tide); + dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level); + *snr = (0xffff - 0xff) + *snr; + + return 0; +} + +static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + u8 dist; + struct mb86a16_state *state = fe->demodulator_priv; + + if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + *ucblocks = dist; + + return 0; +} + +static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + +static struct dvb_frontend_ops mb86a16_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Fujitsu MB86A16 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 3000, + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + .release = mb86a16_release, + + .get_frontend_algo = mb86a16_frontend_algo, + .search = mb86a16_search, + .init = mb86a16_init, + .sleep = mb86a16_sleep, + .read_status = mb86a16_read_status, + + .read_ber = mb86a16_read_ber, + .read_signal_strength = mb86a16_read_signal_strength, + .read_snr = mb86a16_read_snr, + .read_ucblocks = mb86a16_read_ucblocks, + + .diseqc_send_master_cmd = mb86a16_send_diseqc_msg, + .diseqc_send_burst = mb86a16_send_diseqc_burst, + .set_tone = mb86a16_set_tone, +}; + +struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap) +{ + u8 dev_id = 0; + struct mb86a16_state *state = NULL; + + state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL); + if (state == NULL) + goto error; + + state->config = config; + state->i2c_adap = i2c_adap; + + mb86a16_read(state, 0x7f, &dev_id); + if (dev_id != 0xfe) + goto error; + + memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + state->frontend.ops.set_voltage = state->config->set_voltage; + + return &state->frontend; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(mb86a16_attach); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Manu Abraham"); diff --git a/drivers/media/dvb-frontends/mb86a16.h b/drivers/media/dvb-frontends/mb86a16.h new file mode 100644 index 00000000..277ce061 --- /dev/null +++ b/drivers/media/dvb-frontends/mb86a16.h @@ -0,0 +1,52 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MB86A16_H +#define __MB86A16_H + +#include +#include "dvb_frontend.h" + + +struct mb86a16_config { + u8 demod_address; + + int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); +}; + + + +#if IS_ENABLED(CONFIG_DVB_MB86A16) + +extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap); + +#else + +static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_MB86A16 */ + +#endif /* __MB86A16_H */ diff --git a/drivers/media/dvb-frontends/mb86a16_priv.h b/drivers/media/dvb-frontends/mb86a16_priv.h new file mode 100644 index 00000000..360a35ac --- /dev/null +++ b/drivers/media/dvb-frontends/mb86a16_priv.h @@ -0,0 +1,151 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MB86A16_PRIV_H +#define __MB86A16_PRIV_H + +#define MB86A16_TSOUT 0x00 +#define MB86A16_TSOUT_HIZSEL (0x01 << 5) +#define MB86A16_TSOUT_HIZCNTI (0x01 << 4) +#define MB86A16_TSOUT_MODE (0x01 << 3) +#define MB86A16_TSOUT_ORDER (0x01 << 2) +#define MB86A16_TSOUT_ERROR (0x01 << 1) +#define Mb86A16_TSOUT_EDGE (0x01 << 0) + +#define MB86A16_FEC 0x01 +#define MB86A16_FEC_FSYNC (0x01 << 5) +#define MB86A16_FEC_PCKB8 (0x01 << 4) +#define MB86A16_FEC_DVDS (0x01 << 3) +#define MB86A16_FEC_EREN (0x01 << 2) +#define Mb86A16_FEC_RSEN (0x01 << 1) +#define MB86A16_FEC_DIEN (0x01 << 0) + +#define MB86A16_AGC 0x02 +#define MB86A16_AGC_AGMD (0x01 << 6) +#define MB86A16_AGC_AGCW (0x0f << 2) +#define MB86A16_AGC_AGCP (0x01 << 1) +#define MB86A16_AGC_AGCR (0x01 << 0) + +#define MB86A16_SRATE1 0x03 +#define MB86A16_SRATE1_DECI (0x07 << 2) +#define MB86A16_SRATE1_CSEL (0x01 << 1) +#define MB86A16_SRATE1_RSEL (0x01 << 0) + +#define MB86A16_SRATE2 0x04 +#define MB86A16_SRATE2_STOFSL (0xff << 0) + +#define MB86A16_SRATE3 0x05 +#define MB86A16_SRATE2_STOFSH (0xff << 0) + +#define MB86A16_VITERBI 0x06 +#define MB86A16_FRAMESYNC 0x07 +#define MB86A16_CRLFILTCOEF1 0x08 +#define MB86A16_CRLFILTCOEF2 0x09 +#define MB86A16_STRFILTCOEF1 0x0a +#define MB86A16_STRFILTCOEF2 0x0b +#define MB86A16_RESET 0x0c +#define MB86A16_STATUS 0x0d +#define MB86A16_AFCML 0x0e +#define MB86A16_AFCMH 0x0f +#define MB86A16_BERMON 0x10 +#define MB86A16_BERTAB 0x11 +#define MB86A16_BERLSB 0x12 +#define MB86A16_BERMID 0x13 +#define MB86A16_BERMSB 0x14 +#define MB86A16_AGCM 0x15 + +#define MB86A16_DCC1 0x16 +#define MB86A16_DCC1_DISTA (0x01 << 7) +#define MB86A16_DCC1_PRTY (0x01 << 6) +#define MB86A16_DCC1_CTOE (0x01 << 5) +#define MB86A16_DCC1_TBEN (0x01 << 4) +#define MB86A16_DCC1_TBO (0x01 << 3) +#define MB86A16_DCC1_NUM (0x07 << 0) + +#define MB86A16_DCC2 0x17 +#define MB86A16_DCC2_DCBST (0x01 << 0) + +#define MB86A16_DCC3 0x18 +#define MB86A16_DCC3_CODE0 (0xff << 0) + +#define MB86A16_DCC4 0x19 +#define MB86A16_DCC4_CODE1 (0xff << 0) + +#define MB86A16_DCC5 0x1a +#define MB86A16_DCC5_CODE2 (0xff << 0) + +#define MB86A16_DCC6 0x1b +#define MB86A16_DCC6_CODE3 (0xff << 0) + +#define MB86A16_DCC7 0x1c +#define MB86A16_DCC7_CODE4 (0xff << 0) + +#define MB86A16_DCC8 0x1d +#define MB86A16_DCC8_CODE5 (0xff << 0) + +#define MB86A16_DCCOUT 0x1e +#define MB86A16_DCCOUT_DISEN (0x01 << 0) + +#define MB86A16_TONEOUT1 0x1f +#define MB86A16_TONE_TDIVL (0xff << 0) + +#define MB86A16_TONEOUT2 0x20 +#define MB86A16_TONE_TMD (0x03 << 2) +#define MB86A16_TONE_TDIVH (0x03 << 0) + +#define MB86A16_FREQ1 0x21 +#define MB86A16_FREQ2 0x22 +#define MB86A16_FREQ3 0x23 +#define MB86A16_FREQ4 0x24 +#define MB86A16_FREQSET 0x25 +#define MB86A16_CNM 0x26 +#define MB86A16_PORT0 0x27 +#define MB86A16_PORT1 0x28 +#define MB86A16_DRCFILT 0x29 +#define MB86A16_AFC 0x2a +#define MB86A16_AFCEXL 0x2b +#define MB86A16_AFCEXH 0x2c +#define MB86A16_DAGC 0x2d +#define MB86A16_SEQMODE 0x32 +#define MB86A16_S0S1T 0x33 +#define MB86A16_S2S3T 0x34 +#define MB86A16_S4S5T 0x35 +#define MB86A16_CNTMR 0x36 +#define MB86A16_SIG1 0x37 +#define MB86A16_SIG2 0x38 +#define MB86A16_VIMAG 0x39 +#define MB86A16_VISET1 0x3a +#define MB86A16_VISET2 0x3b +#define MB86A16_VISET3 0x3c +#define MB86A16_FAGCS1 0x3d +#define MB86A16_FAGCS2 0x3e +#define MB86A16_FAGCS3 0x3f +#define MB86A16_FAGCS4 0x40 +#define MB86A16_FAGCS5 0x41 +#define MB86A16_FAGCS6 0x42 +#define MB86A16_CRM 0x43 +#define MB86A16_STRM 0x44 +#define MB86A16_DAGCML 0x45 +#define MB86A16_DAGCMH 0x46 +#define MB86A16_QPSKTST 0x49 +#define MB86A16_DISTMON 0x52 +#define MB86A16_VERSION 0x7f + +#endif /* __MB86A16_PRIV_H */ diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c new file mode 100644 index 00000000..2c7217fb --- /dev/null +++ b/drivers/media/dvb-frontends/mb86a20s.c @@ -0,0 +1,2160 @@ +/* + * Fujitu mb86a20s ISDB-T/ISDB-Tsb Module driver + * + * Copyright (C) 2010-2013 Mauro Carvalho Chehab + * Copyright (C) 2009-2010 Douglas Landgraf + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include + +#include "dvb_frontend.h" +#include "mb86a20s.h" + +#define NUM_LAYERS 3 + +static int debug = 1; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + +enum mb86a20s_bandwidth { + MB86A20S_13SEG = 0, + MB86A20S_13SEG_PARTIAL = 1, + MB86A20S_1SEG = 2, + MB86A20S_3SEG = 3, +}; + +u8 mb86a20s_subchannel[] = { + 0xb0, 0xc0, 0xd0, 0xe0, + 0xf0, 0x00, 0x10, 0x20, +}; + +struct mb86a20s_state { + struct i2c_adapter *i2c; + const struct mb86a20s_config *config; + u32 last_frequency; + + struct dvb_frontend frontend; + + u32 if_freq; + enum mb86a20s_bandwidth bw; + bool inversion; + u32 subchannel; + + u32 estimated_rate[NUM_LAYERS]; + unsigned long get_strength_time; + + bool need_init; +}; + +struct regdata { + u8 reg; + u8 data; +}; + +#define BER_SAMPLING_RATE 1 /* Seconds */ + +/* + * Initialization sequence: Use whatevere default values that PV SBTVD + * does on its initialisation, obtained via USB snoop + */ +static struct regdata mb86a20s_init1[] = { + { 0x70, 0x0f }, + { 0x70, 0xff }, + { 0x08, 0x01 }, + { 0x50, 0xd1 }, { 0x51, 0x20 }, +}; + +static struct regdata mb86a20s_init2[] = { + { 0x28, 0x22 }, { 0x29, 0x00 }, { 0x2a, 0x1f }, { 0x2b, 0xf0 }, + { 0x3b, 0x21 }, + { 0x3c, 0x38 }, + { 0x01, 0x0d }, + { 0x04, 0x08 }, { 0x05, 0x03 }, + { 0x04, 0x0e }, { 0x05, 0x00 }, + { 0x04, 0x0f }, { 0x05, 0x37 }, + { 0x04, 0x0b }, { 0x05, 0x78 }, + { 0x04, 0x00 }, { 0x05, 0x00 }, + { 0x04, 0x01 }, { 0x05, 0x1e }, + { 0x04, 0x02 }, { 0x05, 0x07 }, + { 0x04, 0x03 }, { 0x05, 0xd0 }, + { 0x04, 0x09 }, { 0x05, 0x00 }, + { 0x04, 0x0a }, { 0x05, 0xff }, + { 0x04, 0x27 }, { 0x05, 0x00 }, + { 0x04, 0x28 }, { 0x05, 0x00 }, + { 0x04, 0x1e }, { 0x05, 0x00 }, + { 0x04, 0x29 }, { 0x05, 0x64 }, + { 0x04, 0x32 }, { 0x05, 0x02 }, + { 0x04, 0x14 }, { 0x05, 0x02 }, + { 0x04, 0x04 }, { 0x05, 0x00 }, + { 0x04, 0x05 }, { 0x05, 0x22 }, + { 0x04, 0x06 }, { 0x05, 0x0e }, + { 0x04, 0x07 }, { 0x05, 0xd8 }, + { 0x04, 0x12 }, { 0x05, 0x00 }, + { 0x04, 0x13 }, { 0x05, 0xff }, + { 0x04, 0x15 }, { 0x05, 0x4e }, + { 0x04, 0x16 }, { 0x05, 0x20 }, + + /* + * On this demod, when the bit count reaches the count below, + * it collects the bit error count. The bit counters are initialized + * to 65535 here. This warrants that all of them will be quickly + * calculated when device gets locked. As TMCC is parsed, the values + * will be adjusted later in the driver's code. + */ + { 0x52, 0x01 }, /* Turn on BER before Viterbi */ + { 0x50, 0xa7 }, { 0x51, 0x00 }, + { 0x50, 0xa8 }, { 0x51, 0xff }, + { 0x50, 0xa9 }, { 0x51, 0xff }, + { 0x50, 0xaa }, { 0x51, 0x00 }, + { 0x50, 0xab }, { 0x51, 0xff }, + { 0x50, 0xac }, { 0x51, 0xff }, + { 0x50, 0xad }, { 0x51, 0x00 }, + { 0x50, 0xae }, { 0x51, 0xff }, + { 0x50, 0xaf }, { 0x51, 0xff }, + + /* + * On this demod, post BER counts blocks. When the count reaches the + * value below, it collects the block error count. The block counters + * are initialized to 127 here. This warrants that all of them will be + * quickly calculated when device gets locked. As TMCC is parsed, the + * values will be adjusted later in the driver's code. + */ + { 0x5e, 0x07 }, /* Turn on BER after Viterbi */ + { 0x50, 0xdc }, { 0x51, 0x00 }, + { 0x50, 0xdd }, { 0x51, 0x7f }, + { 0x50, 0xde }, { 0x51, 0x00 }, + { 0x50, 0xdf }, { 0x51, 0x7f }, + { 0x50, 0xe0 }, { 0x51, 0x00 }, + { 0x50, 0xe1 }, { 0x51, 0x7f }, + + /* + * On this demod, when the block count reaches the count below, + * it collects the block error count. The block counters are initialized + * to 127 here. This warrants that all of them will be quickly + * calculated when device gets locked. As TMCC is parsed, the values + * will be adjusted later in the driver's code. + */ + { 0x50, 0xb0 }, { 0x51, 0x07 }, /* Enable PER */ + { 0x50, 0xb2 }, { 0x51, 0x00 }, + { 0x50, 0xb3 }, { 0x51, 0x7f }, + { 0x50, 0xb4 }, { 0x51, 0x00 }, + { 0x50, 0xb5 }, { 0x51, 0x7f }, + { 0x50, 0xb6 }, { 0x51, 0x00 }, + { 0x50, 0xb7 }, { 0x51, 0x7f }, + + { 0x50, 0x50 }, { 0x51, 0x02 }, /* MER manual mode */ + { 0x50, 0x51 }, { 0x51, 0x04 }, /* MER symbol 4 */ + { 0x45, 0x04 }, /* CN symbol 4 */ + { 0x48, 0x04 }, /* CN manual mode */ + + { 0x50, 0xd6 }, { 0x51, 0x1f }, + { 0x50, 0xd2 }, { 0x51, 0x03 }, + { 0x50, 0xd7 }, { 0x51, 0xbf }, + { 0x28, 0x74 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0xff }, + { 0x28, 0x46 }, { 0x29, 0x00 }, { 0x2a, 0x1a }, { 0x2b, 0x0c }, + + { 0x04, 0x40 }, { 0x05, 0x00 }, + { 0x28, 0x00 }, { 0x2b, 0x08 }, + { 0x28, 0x05 }, { 0x2b, 0x00 }, + { 0x1c, 0x01 }, + { 0x28, 0x06 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x1f }, + { 0x28, 0x07 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x18 }, + { 0x28, 0x08 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x12 }, + { 0x28, 0x09 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x30 }, + { 0x28, 0x0a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x37 }, + { 0x28, 0x0b }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x02 }, + { 0x28, 0x0c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x09 }, + { 0x28, 0x0d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x06 }, + { 0x28, 0x0e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x7b }, + { 0x28, 0x0f }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x76 }, + { 0x28, 0x10 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x7d }, + { 0x28, 0x11 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x08 }, + { 0x28, 0x12 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0b }, + { 0x28, 0x13 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 }, + { 0x28, 0x14 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xf2 }, + { 0x28, 0x15 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xf3 }, + { 0x28, 0x16 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x05 }, + { 0x28, 0x17 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x16 }, + { 0x28, 0x18 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0f }, + { 0x28, 0x19 }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xef }, + { 0x28, 0x1a }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xd8 }, + { 0x28, 0x1b }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xf1 }, + { 0x28, 0x1c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x3d }, + { 0x28, 0x1d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x94 }, + { 0x28, 0x1e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0xba }, + { 0x50, 0x1e }, { 0x51, 0x5d }, + { 0x50, 0x22 }, { 0x51, 0x00 }, + { 0x50, 0x23 }, { 0x51, 0xc8 }, + { 0x50, 0x24 }, { 0x51, 0x00 }, + { 0x50, 0x25 }, { 0x51, 0xf0 }, + { 0x50, 0x26 }, { 0x51, 0x00 }, + { 0x50, 0x27 }, { 0x51, 0xc3 }, + { 0x50, 0x39 }, { 0x51, 0x02 }, + { 0xec, 0x0f }, + { 0xeb, 0x1f }, + { 0x28, 0x6a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 }, + { 0xd0, 0x00 }, +}; + +static struct regdata mb86a20s_reset_reception[] = { + { 0x70, 0xf0 }, + { 0x70, 0xff }, + { 0x08, 0x01 }, + { 0x08, 0x00 }, +}; + +static struct regdata mb86a20s_per_ber_reset[] = { + { 0x53, 0x00 }, /* pre BER Counter reset */ + { 0x53, 0x07 }, + + { 0x5f, 0x00 }, /* post BER Counter reset */ + { 0x5f, 0x07 }, + + { 0x50, 0xb1 }, /* PER Counter reset */ + { 0x51, 0x07 }, + { 0x51, 0x00 }, +}; + +/* + * I2C read/write functions and macros + */ + +static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, + u8 i2c_addr, u8 reg, u8 data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 + }; + int rc; + + rc = i2c_transfer(state->i2c, &msg, 1); + if (rc != 1) { + dev_err(&state->i2c->dev, + "%s: writereg error (rc == %i, reg == 0x%02x, data == 0x%02x)\n", + __func__, rc, reg, data); + return rc; + } + + return 0; +} + +static int mb86a20s_i2c_writeregdata(struct mb86a20s_state *state, + u8 i2c_addr, struct regdata *rd, int size) +{ + int i, rc; + + for (i = 0; i < size; i++) { + rc = mb86a20s_i2c_writereg(state, i2c_addr, rd[i].reg, + rd[i].data); + if (rc < 0) + return rc; + } + return 0; +} + +static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, + u8 i2c_addr, u8 reg) +{ + u8 val; + int rc; + struct i2c_msg msg[] = { + { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, + { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 } + }; + + rc = i2c_transfer(state->i2c, msg, 2); + + if (rc != 2) { + dev_err(&state->i2c->dev, "%s: reg=0x%x (error=%d)\n", + __func__, reg, rc); + return (rc < 0) ? rc : -EIO; + } + + return val; +} + +#define mb86a20s_readreg(state, reg) \ + mb86a20s_i2c_readreg(state, state->config->demod_address, reg) +#define mb86a20s_writereg(state, reg, val) \ + mb86a20s_i2c_writereg(state, state->config->demod_address, reg, val) +#define mb86a20s_writeregdata(state, regdata) \ + mb86a20s_i2c_writeregdata(state, state->config->demod_address, \ + regdata, ARRAY_SIZE(regdata)) + +/* + * Ancillary internal routines (likely compiled inlined) + * + * The functions below assume that gateway lock has already obtained + */ + +static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int val; + + *status = 0; + + val = mb86a20s_readreg(state, 0x0a) & 0xf; + if (val < 0) + return val; + + if (val >= 2) + *status |= FE_HAS_SIGNAL; + + if (val >= 4) + *status |= FE_HAS_CARRIER; + + if (val >= 5) + *status |= FE_HAS_VITERBI; + + if (val >= 7) + *status |= FE_HAS_SYNC; + + if (val >= 8) /* Maybe 9? */ + *status |= FE_HAS_LOCK; + + dev_dbg(&state->i2c->dev, "%s: Status = 0x%02x (state = %d)\n", + __func__, *status, val); + + return val; +} + +static int mb86a20s_read_signal_strength(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc; + unsigned rf_max, rf_min, rf; + + if (state->get_strength_time && + (!time_after(jiffies, state->get_strength_time))) + return c->strength.stat[0].uvalue; + + /* Reset its value if an error happen */ + c->strength.stat[0].uvalue = 0; + + /* Does a binary search to get RF strength */ + rf_max = 0xfff; + rf_min = 0; + do { + rf = (rf_max + rf_min) / 2; + rc = mb86a20s_writereg(state, 0x04, 0x1f); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x05, rf >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x04, 0x20); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x05, rf); + if (rc < 0) + return rc; + + rc = mb86a20s_readreg(state, 0x02); + if (rc < 0) + return rc; + if (rc & 0x08) + rf_min = (rf_max + rf_min) / 2; + else + rf_max = (rf_max + rf_min) / 2; + if (rf_max - rf_min < 4) { + rf = (rf_max + rf_min) / 2; + + /* Rescale it from 2^12 (4096) to 2^16 */ + rf = rf << (16 - 12); + if (rf) + rf |= (1 << 12) - 1; + + dev_dbg(&state->i2c->dev, + "%s: signal strength = %d (%d < RF=%d < %d)\n", + __func__, rf, rf_min, rf >> 4, rf_max); + c->strength.stat[0].uvalue = rf; + state->get_strength_time = jiffies + + msecs_to_jiffies(1000); + return 0; + } + } while (1); +} + +static int mb86a20s_get_modulation(struct mb86a20s_state *state, + unsigned layer) +{ + int rc; + static unsigned char reg[] = { + [0] = 0x86, /* Layer A */ + [1] = 0x8a, /* Layer B */ + [2] = 0x8e, /* Layer C */ + }; + + if (layer >= ARRAY_SIZE(reg)) + return -EINVAL; + rc = mb86a20s_writereg(state, 0x6d, reg[layer]); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x6e); + if (rc < 0) + return rc; + switch ((rc >> 4) & 0x07) { + case 0: + return DQPSK; + case 1: + return QPSK; + case 2: + return QAM_16; + case 3: + return QAM_64; + default: + return QAM_AUTO; + } +} + +static int mb86a20s_get_fec(struct mb86a20s_state *state, + unsigned layer) +{ + int rc; + + static unsigned char reg[] = { + [0] = 0x87, /* Layer A */ + [1] = 0x8b, /* Layer B */ + [2] = 0x8f, /* Layer C */ + }; + + if (layer >= ARRAY_SIZE(reg)) + return -EINVAL; + rc = mb86a20s_writereg(state, 0x6d, reg[layer]); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x6e); + if (rc < 0) + return rc; + switch ((rc >> 4) & 0x07) { + case 0: + return FEC_1_2; + case 1: + return FEC_2_3; + case 2: + return FEC_3_4; + case 3: + return FEC_5_6; + case 4: + return FEC_7_8; + default: + return FEC_AUTO; + } +} + +static int mb86a20s_get_interleaving(struct mb86a20s_state *state, + unsigned layer) +{ + int rc; + + static unsigned char reg[] = { + [0] = 0x88, /* Layer A */ + [1] = 0x8c, /* Layer B */ + [2] = 0x90, /* Layer C */ + }; + + if (layer >= ARRAY_SIZE(reg)) + return -EINVAL; + rc = mb86a20s_writereg(state, 0x6d, reg[layer]); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x6e); + if (rc < 0) + return rc; + + switch ((rc >> 4) & 0x07) { + case 1: + return GUARD_INTERVAL_1_4; + case 2: + return GUARD_INTERVAL_1_8; + case 3: + return GUARD_INTERVAL_1_16; + case 4: + return GUARD_INTERVAL_1_32; + + default: + case 0: + return GUARD_INTERVAL_AUTO; + } +} + +static int mb86a20s_get_segment_count(struct mb86a20s_state *state, + unsigned layer) +{ + int rc, count; + static unsigned char reg[] = { + [0] = 0x89, /* Layer A */ + [1] = 0x8d, /* Layer B */ + [2] = 0x91, /* Layer C */ + }; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= ARRAY_SIZE(reg)) + return -EINVAL; + + rc = mb86a20s_writereg(state, 0x6d, reg[layer]); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x6e); + if (rc < 0) + return rc; + count = (rc >> 4) & 0x0f; + + dev_dbg(&state->i2c->dev, "%s: segments: %d.\n", __func__, count); + + return count; +} + +static void mb86a20s_reset_frontend_cache(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Fixed parameters */ + c->delivery_system = SYS_ISDBT; + c->bandwidth_hz = 6000000; + + /* Initialize values that will be later autodetected */ + c->isdbt_layer_enabled = 0; + c->transmission_mode = TRANSMISSION_MODE_AUTO; + c->guard_interval = GUARD_INTERVAL_AUTO; + c->isdbt_sb_mode = 0; + c->isdbt_sb_segment_count = 0; +} + +/* + * Estimates the bit rate using the per-segment bit rate given by + * ABNT/NBR 15601 spec (table 4). + */ +static u32 isdbt_rate[3][5][4] = { + { /* DQPSK/QPSK */ + { 280850, 312060, 330420, 340430 }, /* 1/2 */ + { 374470, 416080, 440560, 453910 }, /* 2/3 */ + { 421280, 468090, 495630, 510650 }, /* 3/4 */ + { 468090, 520100, 550700, 567390 }, /* 5/6 */ + { 491500, 546110, 578230, 595760 }, /* 7/8 */ + }, { /* QAM16 */ + { 561710, 624130, 660840, 680870 }, /* 1/2 */ + { 748950, 832170, 881120, 907820 }, /* 2/3 */ + { 842570, 936190, 991260, 1021300 }, /* 3/4 */ + { 936190, 1040210, 1101400, 1134780 }, /* 5/6 */ + { 983000, 1092220, 1156470, 1191520 }, /* 7/8 */ + }, { /* QAM64 */ + { 842570, 936190, 991260, 1021300 }, /* 1/2 */ + { 1123430, 1248260, 1321680, 1361740 }, /* 2/3 */ + { 1263860, 1404290, 1486900, 1531950 }, /* 3/4 */ + { 1404290, 1560320, 1652110, 1702170 }, /* 5/6 */ + { 1474500, 1638340, 1734710, 1787280 }, /* 7/8 */ + } +}; + +static void mb86a20s_layer_bitrate(struct dvb_frontend *fe, u32 layer, + u32 modulation, u32 forward_error_correction, + u32 interleaving, + u32 segment) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + u32 rate; + int mod, fec, guard; + + /* + * If modulation/fec/interleaving is not detected, the default is + * to consider the lowest bit rate, to avoid taking too long time + * to get BER. + */ + switch (modulation) { + case DQPSK: + case QPSK: + default: + mod = 0; + break; + case QAM_16: + mod = 1; + break; + case QAM_64: + mod = 2; + break; + } + + switch (forward_error_correction) { + default: + case FEC_1_2: + case FEC_AUTO: + fec = 0; + break; + case FEC_2_3: + fec = 1; + break; + case FEC_3_4: + fec = 2; + break; + case FEC_5_6: + fec = 3; + break; + case FEC_7_8: + fec = 4; + break; + } + + switch (interleaving) { + default: + case GUARD_INTERVAL_1_4: + guard = 0; + break; + case GUARD_INTERVAL_1_8: + guard = 1; + break; + case GUARD_INTERVAL_1_16: + guard = 2; + break; + case GUARD_INTERVAL_1_32: + guard = 3; + break; + } + + /* Samples BER at BER_SAMPLING_RATE seconds */ + rate = isdbt_rate[mod][fec][guard] * segment * BER_SAMPLING_RATE; + + /* Avoids sampling too quickly or to overflow the register */ + if (rate < 256) + rate = 256; + else if (rate > (1 << 24) - 1) + rate = (1 << 24) - 1; + + dev_dbg(&state->i2c->dev, + "%s: layer %c bitrate: %d kbps; counter = %d (0x%06x)\n", + __func__, 'A' + layer, + segment * isdbt_rate[mod][fec][guard]/1000, + rate, rate); + + state->estimated_rate[layer] = rate; +} + +static int mb86a20s_get_frontend(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int layer, rc; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Reset frontend cache to default values */ + mb86a20s_reset_frontend_cache(fe); + + /* Check for partial reception */ + rc = mb86a20s_writereg(state, 0x6d, 0x85); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x6e); + if (rc < 0) + return rc; + c->isdbt_partial_reception = (rc & 0x10) ? 1 : 0; + + /* Get per-layer data */ + + for (layer = 0; layer < NUM_LAYERS; layer++) { + dev_dbg(&state->i2c->dev, "%s: getting data for layer %c.\n", + __func__, 'A' + layer); + + rc = mb86a20s_get_segment_count(state, layer); + if (rc < 0) + goto noperlayer_error; + if (rc >= 0 && rc < 14) { + c->layer[layer].segment_count = rc; + } else { + c->layer[layer].segment_count = 0; + state->estimated_rate[layer] = 0; + continue; + } + c->isdbt_layer_enabled |= 1 << layer; + rc = mb86a20s_get_modulation(state, layer); + if (rc < 0) + goto noperlayer_error; + dev_dbg(&state->i2c->dev, "%s: modulation %d.\n", + __func__, rc); + c->layer[layer].modulation = rc; + rc = mb86a20s_get_fec(state, layer); + if (rc < 0) + goto noperlayer_error; + dev_dbg(&state->i2c->dev, "%s: FEC %d.\n", + __func__, rc); + c->layer[layer].fec = rc; + rc = mb86a20s_get_interleaving(state, layer); + if (rc < 0) + goto noperlayer_error; + dev_dbg(&state->i2c->dev, "%s: interleaving %d.\n", + __func__, rc); + c->layer[layer].interleaving = rc; + mb86a20s_layer_bitrate(fe, layer, c->layer[layer].modulation, + c->layer[layer].fec, + c->layer[layer].interleaving, + c->layer[layer].segment_count); + } + + rc = mb86a20s_writereg(state, 0x6d, 0x84); + if (rc < 0) + return rc; + if ((rc & 0x60) == 0x20) { + c->isdbt_sb_mode = 1; + /* At least, one segment should exist */ + if (!c->isdbt_sb_segment_count) + c->isdbt_sb_segment_count = 1; + } + + /* Get transmission mode and guard interval */ + rc = mb86a20s_readreg(state, 0x07); + if (rc < 0) + return rc; + if ((rc & 0x60) == 0x20) { + switch (rc & 0x0c >> 2) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_4K; + break; + case 2: + c->transmission_mode = TRANSMISSION_MODE_8K; + break; + } + } + if (!(rc & 0x10)) { + switch (rc & 0x3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + } + } + return 0; + +noperlayer_error: + + /* per-layer info is incomplete; discard all per-layer */ + c->isdbt_layer_enabled = 0; + + return rc; +} + +static int mb86a20s_reset_counters(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc, val; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Reset the counters, if the channel changed */ + if (state->last_frequency != c->frequency) { + memset(&c->cnr, 0, sizeof(c->cnr)); + memset(&c->pre_bit_error, 0, sizeof(c->pre_bit_error)); + memset(&c->pre_bit_count, 0, sizeof(c->pre_bit_count)); + memset(&c->post_bit_error, 0, sizeof(c->post_bit_error)); + memset(&c->post_bit_count, 0, sizeof(c->post_bit_count)); + memset(&c->block_error, 0, sizeof(c->block_error)); + memset(&c->block_count, 0, sizeof(c->block_count)); + + state->last_frequency = c->frequency; + } + + /* Clear status for most stats */ + + /* BER/PER counter reset */ + rc = mb86a20s_writeregdata(state, mb86a20s_per_ber_reset); + if (rc < 0) + goto err; + + /* CNR counter reset */ + rc = mb86a20s_readreg(state, 0x45); + if (rc < 0) + goto err; + val = rc; + rc = mb86a20s_writereg(state, 0x45, val | 0x10); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x45, val & 0x6f); + if (rc < 0) + goto err; + + /* MER counter reset */ + rc = mb86a20s_writereg(state, 0x50, 0x50); + if (rc < 0) + goto err; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + goto err; + val = rc; + rc = mb86a20s_writereg(state, 0x51, val | 0x01); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x51, val & 0x06); + if (rc < 0) + goto err; + + goto ok; +err: + dev_err(&state->i2c->dev, + "%s: Can't reset FE statistics (error %d).\n", + __func__, rc); +ok: + return rc; +} + +static int mb86a20s_get_pre_ber(struct dvb_frontend *fe, + unsigned layer, + u32 *error, u32 *count) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc, val; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= NUM_LAYERS) + return -EINVAL; + + /* Check if the BER measures are already available */ + rc = mb86a20s_readreg(state, 0x54); + if (rc < 0) + return rc; + + /* Check if data is available for that layer */ + if (!(rc & (1 << layer))) { + dev_dbg(&state->i2c->dev, + "%s: preBER for layer %c is not available yet.\n", + __func__, 'A' + layer); + return -EBUSY; + } + + /* Read Bit Error Count */ + rc = mb86a20s_readreg(state, 0x55 + layer * 3); + if (rc < 0) + return rc; + *error = rc << 16; + rc = mb86a20s_readreg(state, 0x56 + layer * 3); + if (rc < 0) + return rc; + *error |= rc << 8; + rc = mb86a20s_readreg(state, 0x57 + layer * 3); + if (rc < 0) + return rc; + *error |= rc; + + dev_dbg(&state->i2c->dev, + "%s: bit error before Viterbi for layer %c: %d.\n", + __func__, 'A' + layer, *error); + + /* Read Bit Count */ + rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count = rc << 16; + rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count |= rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count |= rc; + + dev_dbg(&state->i2c->dev, + "%s: bit count before Viterbi for layer %c: %d.\n", + __func__, 'A' + layer, *count); + + + /* + * As we get TMCC data from the frontend, we can better estimate the + * BER bit counters, in order to do the BER measure during a longer + * time. Use those data, if available, to update the bit count + * measure. + */ + + if (state->estimated_rate[layer] + && state->estimated_rate[layer] != *count) { + dev_dbg(&state->i2c->dev, + "%s: updating layer %c preBER counter to %d.\n", + __func__, 'A' + layer, state->estimated_rate[layer]); + + /* Turn off BER before Viterbi */ + rc = mb86a20s_writereg(state, 0x52, 0x00); + + /* Update counter for this layer */ + rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, + state->estimated_rate[layer] >> 16); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, + state->estimated_rate[layer] >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, + state->estimated_rate[layer]); + if (rc < 0) + return rc; + + /* Turn on BER before Viterbi */ + rc = mb86a20s_writereg(state, 0x52, 0x01); + + /* Reset all preBER counters */ + rc = mb86a20s_writereg(state, 0x53, 0x00); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x53, 0x07); + } else { + /* Reset counter to collect new data */ + rc = mb86a20s_readreg(state, 0x53); + if (rc < 0) + return rc; + val = rc; + rc = mb86a20s_writereg(state, 0x53, val & ~(1 << layer)); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x53, val | (1 << layer)); + } + + return rc; +} + +static int mb86a20s_get_post_ber(struct dvb_frontend *fe, + unsigned layer, + u32 *error, u32 *count) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + u32 counter, collect_rate; + int rc, val; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= NUM_LAYERS) + return -EINVAL; + + /* Check if the BER measures are already available */ + rc = mb86a20s_readreg(state, 0x60); + if (rc < 0) + return rc; + + /* Check if data is available for that layer */ + if (!(rc & (1 << layer))) { + dev_dbg(&state->i2c->dev, + "%s: post BER for layer %c is not available yet.\n", + __func__, 'A' + layer); + return -EBUSY; + } + + /* Read Bit Error Count */ + rc = mb86a20s_readreg(state, 0x64 + layer * 3); + if (rc < 0) + return rc; + *error = rc << 16; + rc = mb86a20s_readreg(state, 0x65 + layer * 3); + if (rc < 0) + return rc; + *error |= rc << 8; + rc = mb86a20s_readreg(state, 0x66 + layer * 3); + if (rc < 0) + return rc; + *error |= rc; + + dev_dbg(&state->i2c->dev, + "%s: post bit error for layer %c: %d.\n", + __func__, 'A' + layer, *error); + + /* Read Bit Count */ + rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + counter = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + counter |= rc; + *count = counter * 204 * 8; + + dev_dbg(&state->i2c->dev, + "%s: post bit count for layer %c: %d.\n", + __func__, 'A' + layer, *count); + + /* + * As we get TMCC data from the frontend, we can better estimate the + * BER bit counters, in order to do the BER measure during a longer + * time. Use those data, if available, to update the bit count + * measure. + */ + + if (!state->estimated_rate[layer]) + goto reset_measurement; + + collect_rate = state->estimated_rate[layer] / 204 / 8; + if (collect_rate < 32) + collect_rate = 32; + if (collect_rate > 65535) + collect_rate = 65535; + if (collect_rate != counter) { + dev_dbg(&state->i2c->dev, + "%s: updating postBER counter on layer %c to %d.\n", + __func__, 'A' + layer, collect_rate); + + /* Turn off BER after Viterbi */ + rc = mb86a20s_writereg(state, 0x5e, 0x00); + + /* Update counter for this layer */ + rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff); + if (rc < 0) + return rc; + + /* Turn on BER after Viterbi */ + rc = mb86a20s_writereg(state, 0x5e, 0x07); + + /* Reset all preBER counters */ + rc = mb86a20s_writereg(state, 0x5f, 0x00); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x5f, 0x07); + + return rc; + } + +reset_measurement: + /* Reset counter to collect new data */ + rc = mb86a20s_readreg(state, 0x5f); + if (rc < 0) + return rc; + val = rc; + rc = mb86a20s_writereg(state, 0x5f, val & ~(1 << layer)); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x5f, val | (1 << layer)); + + return rc; +} + +static int mb86a20s_get_blk_error(struct dvb_frontend *fe, + unsigned layer, + u32 *error, u32 *count) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc, val; + u32 collect_rate; + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= NUM_LAYERS) + return -EINVAL; + + /* Check if the PER measures are already available */ + rc = mb86a20s_writereg(state, 0x50, 0xb8); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + + /* Check if data is available for that layer */ + + if (!(rc & (1 << layer))) { + dev_dbg(&state->i2c->dev, + "%s: block counts for layer %c aren't available yet.\n", + __func__, 'A' + layer); + return -EBUSY; + } + + /* Read Packet error Count */ + rc = mb86a20s_writereg(state, 0x50, 0xb9 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *error = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xba + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *error |= rc; + dev_dbg(&state->i2c->dev, "%s: block error for layer %c: %d.\n", + __func__, 'A' + layer, *error); + + /* Read Bit Count */ + rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count |= rc; + + dev_dbg(&state->i2c->dev, + "%s: block count for layer %c: %d.\n", + __func__, 'A' + layer, *count); + + /* + * As we get TMCC data from the frontend, we can better estimate the + * BER bit counters, in order to do the BER measure during a longer + * time. Use those data, if available, to update the bit count + * measure. + */ + + if (!state->estimated_rate[layer]) + goto reset_measurement; + + collect_rate = state->estimated_rate[layer] / 204 / 8; + if (collect_rate < 32) + collect_rate = 32; + if (collect_rate > 65535) + collect_rate = 65535; + + if (collect_rate != *count) { + dev_dbg(&state->i2c->dev, + "%s: updating PER counter on layer %c to %d.\n", + __func__, 'A' + layer, collect_rate); + + /* Stop PER measurement */ + rc = mb86a20s_writereg(state, 0x50, 0xb0); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x00); + if (rc < 0) + return rc; + + /* Update this layer's counter */ + rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff); + if (rc < 0) + return rc; + + /* start PER measurement */ + rc = mb86a20s_writereg(state, 0x50, 0xb0); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x07); + if (rc < 0) + return rc; + + /* Reset all counters to collect new data */ + rc = mb86a20s_writereg(state, 0x50, 0xb1); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x07); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x00); + + return rc; + } + +reset_measurement: + /* Reset counter to collect new data */ + rc = mb86a20s_writereg(state, 0x50, 0xb1); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + val = rc; + rc = mb86a20s_writereg(state, 0x51, val | (1 << layer)); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, val & ~(1 << layer)); + + return rc; +} + +struct linear_segments { + unsigned x, y; +}; + +/* + * All tables below return a dB/1000 measurement + */ + +static struct linear_segments cnr_to_db_table[] = { + { 19648, 0}, + { 18187, 1000}, + { 16534, 2000}, + { 14823, 3000}, + { 13161, 4000}, + { 11622, 5000}, + { 10279, 6000}, + { 9089, 7000}, + { 8042, 8000}, + { 7137, 9000}, + { 6342, 10000}, + { 5641, 11000}, + { 5030, 12000}, + { 4474, 13000}, + { 3988, 14000}, + { 3556, 15000}, + { 3180, 16000}, + { 2841, 17000}, + { 2541, 18000}, + { 2276, 19000}, + { 2038, 20000}, + { 1800, 21000}, + { 1625, 22000}, + { 1462, 23000}, + { 1324, 24000}, + { 1175, 25000}, + { 1063, 26000}, + { 980, 27000}, + { 907, 28000}, + { 840, 29000}, + { 788, 30000}, +}; + +static struct linear_segments cnr_64qam_table[] = { + { 3922688, 0}, + { 3920384, 1000}, + { 3902720, 2000}, + { 3894784, 3000}, + { 3882496, 4000}, + { 3872768, 5000}, + { 3858944, 6000}, + { 3851520, 7000}, + { 3838976, 8000}, + { 3829248, 9000}, + { 3818240, 10000}, + { 3806976, 11000}, + { 3791872, 12000}, + { 3767040, 13000}, + { 3720960, 14000}, + { 3637504, 15000}, + { 3498496, 16000}, + { 3296000, 17000}, + { 3031040, 18000}, + { 2715392, 19000}, + { 2362624, 20000}, + { 1963264, 21000}, + { 1649664, 22000}, + { 1366784, 23000}, + { 1120768, 24000}, + { 890880, 25000}, + { 723456, 26000}, + { 612096, 27000}, + { 518912, 28000}, + { 448256, 29000}, + { 388864, 30000}, +}; + +static struct linear_segments cnr_16qam_table[] = { + { 5314816, 0}, + { 5219072, 1000}, + { 5118720, 2000}, + { 4998912, 3000}, + { 4875520, 4000}, + { 4736000, 5000}, + { 4604160, 6000}, + { 4458752, 7000}, + { 4300288, 8000}, + { 4092928, 9000}, + { 3836160, 10000}, + { 3521024, 11000}, + { 3155968, 12000}, + { 2756864, 13000}, + { 2347008, 14000}, + { 1955072, 15000}, + { 1593600, 16000}, + { 1297920, 17000}, + { 1043968, 18000}, + { 839680, 19000}, + { 672256, 20000}, + { 523008, 21000}, + { 424704, 22000}, + { 345088, 23000}, + { 280064, 24000}, + { 221440, 25000}, + { 179712, 26000}, + { 151040, 27000}, + { 128512, 28000}, + { 110080, 29000}, + { 95744, 30000}, +}; + +struct linear_segments cnr_qpsk_table[] = { + { 2834176, 0}, + { 2683648, 1000}, + { 2536960, 2000}, + { 2391808, 3000}, + { 2133248, 4000}, + { 1906176, 5000}, + { 1666560, 6000}, + { 1422080, 7000}, + { 1189632, 8000}, + { 976384, 9000}, + { 790272, 10000}, + { 633344, 11000}, + { 505600, 12000}, + { 402944, 13000}, + { 320768, 14000}, + { 255488, 15000}, + { 204032, 16000}, + { 163072, 17000}, + { 130304, 18000}, + { 105216, 19000}, + { 83456, 20000}, + { 65024, 21000}, + { 52480, 22000}, + { 42752, 23000}, + { 34560, 24000}, + { 27136, 25000}, + { 22016, 26000}, + { 18432, 27000}, + { 15616, 28000}, + { 13312, 29000}, + { 11520, 30000}, +}; + +static u32 interpolate_value(u32 value, struct linear_segments *segments, + unsigned len) +{ + u64 tmp64; + u32 dx, dy; + int i, ret; + + if (value >= segments[0].x) + return segments[0].y; + if (value < segments[len-1].x) + return segments[len-1].y; + + for (i = 1; i < len - 1; i++) { + /* If value is identical, no need to interpolate */ + if (value == segments[i].x) + return segments[i].y; + if (value > segments[i].x) + break; + } + + /* Linear interpolation between the two (x,y) points */ + dy = segments[i].y - segments[i - 1].y; + dx = segments[i - 1].x - segments[i].x; + tmp64 = value - segments[i].x; + tmp64 *= dy; + do_div(tmp64, dx); + ret = segments[i].y - tmp64; + + return ret; +} + +static int mb86a20s_get_main_CNR(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 cnr_linear, cnr; + int rc, val; + + /* Check if CNR is available */ + rc = mb86a20s_readreg(state, 0x45); + if (rc < 0) + return rc; + + if (!(rc & 0x40)) { + dev_dbg(&state->i2c->dev, "%s: CNR is not available yet.\n", + __func__); + return -EBUSY; + } + val = rc; + + rc = mb86a20s_readreg(state, 0x46); + if (rc < 0) + return rc; + cnr_linear = rc << 8; + + rc = mb86a20s_readreg(state, 0x46); + if (rc < 0) + return rc; + cnr_linear |= rc; + + cnr = interpolate_value(cnr_linear, + cnr_to_db_table, ARRAY_SIZE(cnr_to_db_table)); + + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + c->cnr.stat[0].svalue = cnr; + + dev_dbg(&state->i2c->dev, "%s: CNR is %d.%03d dB (%d)\n", + __func__, cnr / 1000, cnr % 1000, cnr_linear); + + /* CNR counter reset */ + rc = mb86a20s_writereg(state, 0x45, val | 0x10); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x45, val & 0x6f); + + return rc; +} + +static int mb86a20s_get_blk_error_layer_CNR(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 mer, cnr; + int rc, val, layer; + struct linear_segments *segs; + unsigned segs_len; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Check if the measures are already available */ + rc = mb86a20s_writereg(state, 0x50, 0x5b); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + + /* Check if data is available */ + if (!(rc & 0x01)) { + dev_dbg(&state->i2c->dev, + "%s: MER measures aren't available yet.\n", __func__); + return -EBUSY; + } + + /* Read all layers */ + for (layer = 0; layer < NUM_LAYERS; layer++) { + if (!(c->isdbt_layer_enabled & (1 << layer))) { + c->cnr.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; + continue; + } + + rc = mb86a20s_writereg(state, 0x50, 0x52 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + mer = rc << 16; + rc = mb86a20s_writereg(state, 0x50, 0x53 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + mer |= rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0x54 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + mer |= rc; + + switch (c->layer[layer].modulation) { + case DQPSK: + case QPSK: + segs = cnr_qpsk_table; + segs_len = ARRAY_SIZE(cnr_qpsk_table); + break; + case QAM_16: + segs = cnr_16qam_table; + segs_len = ARRAY_SIZE(cnr_16qam_table); + break; + default: + case QAM_64: + segs = cnr_64qam_table; + segs_len = ARRAY_SIZE(cnr_64qam_table); + break; + } + cnr = interpolate_value(mer, segs, segs_len); + + c->cnr.stat[1 + layer].scale = FE_SCALE_DECIBEL; + c->cnr.stat[1 + layer].svalue = cnr; + + dev_dbg(&state->i2c->dev, + "%s: CNR for layer %c is %d.%03d dB (MER = %d).\n", + __func__, 'A' + layer, cnr / 1000, cnr % 1000, mer); + + } + + /* Start a new MER measurement */ + /* MER counter reset */ + rc = mb86a20s_writereg(state, 0x50, 0x50); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + val = rc; + + rc = mb86a20s_writereg(state, 0x51, val | 0x01); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, val & 0x06); + if (rc < 0) + return rc; + + return 0; +} + +static void mb86a20s_stats_not_ready(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int layer; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Fill the length of each status counter */ + + /* Only global stats */ + c->strength.len = 1; + + /* Per-layer stats - 3 layers + global */ + c->cnr.len = NUM_LAYERS + 1; + c->pre_bit_error.len = NUM_LAYERS + 1; + c->pre_bit_count.len = NUM_LAYERS + 1; + c->post_bit_error.len = NUM_LAYERS + 1; + c->post_bit_count.len = NUM_LAYERS + 1; + c->block_error.len = NUM_LAYERS + 1; + c->block_count.len = NUM_LAYERS + 1; + + /* Signal is always available */ + c->strength.stat[0].scale = FE_SCALE_RELATIVE; + c->strength.stat[0].uvalue = 0; + + /* Put all of them at FE_SCALE_NOT_AVAILABLE */ + for (layer = 0; layer < NUM_LAYERS + 1; layer++) { + c->cnr.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; + c->block_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; + } +} + +static int mb86a20s_get_stats(struct dvb_frontend *fe, int status_nr) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc = 0, layer; + u32 bit_error = 0, bit_count = 0; + u32 t_pre_bit_error = 0, t_pre_bit_count = 0; + u32 t_post_bit_error = 0, t_post_bit_count = 0; + u32 block_error = 0, block_count = 0; + u32 t_block_error = 0, t_block_count = 0; + int active_layers = 0, pre_ber_layers = 0, post_ber_layers = 0; + int per_layers = 0; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + mb86a20s_get_main_CNR(fe); + + /* Get per-layer stats */ + mb86a20s_get_blk_error_layer_CNR(fe); + + /* + * At state 7, only CNR is available + * For BER measures, state=9 is required + * FIXME: we may get MER measures with state=8 + */ + if (status_nr < 9) + return 0; + + for (layer = 0; layer < NUM_LAYERS; layer++) { + if (c->isdbt_layer_enabled & (1 << layer)) { + /* Layer is active and has rc segments */ + active_layers++; + + /* Handle BER before vterbi */ + rc = mb86a20s_get_pre_ber(fe, layer, + &bit_error, &bit_count); + if (rc >= 0) { + c->pre_bit_error.stat[1 + layer].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[1 + layer].uvalue += bit_error; + c->pre_bit_count.stat[1 + layer].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[1 + layer].uvalue += bit_count; + } else if (rc != -EBUSY) { + /* + * If an I/O error happened, + * measures are now unavailable + */ + c->pre_bit_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; + dev_err(&state->i2c->dev, + "%s: Can't get BER for layer %c (error %d).\n", + __func__, 'A' + layer, rc); + } + if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE) + pre_ber_layers++; + + /* Handle BER post vterbi */ + rc = mb86a20s_get_post_ber(fe, layer, + &bit_error, &bit_count); + if (rc >= 0) { + c->post_bit_error.stat[1 + layer].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[1 + layer].uvalue += bit_error; + c->post_bit_count.stat[1 + layer].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[1 + layer].uvalue += bit_count; + } else if (rc != -EBUSY) { + /* + * If an I/O error happened, + * measures are now unavailable + */ + c->post_bit_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; + dev_err(&state->i2c->dev, + "%s: Can't get BER for layer %c (error %d).\n", + __func__, 'A' + layer, rc); + } + if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE) + post_ber_layers++; + + /* Handle Block errors for PER/UCB reports */ + rc = mb86a20s_get_blk_error(fe, layer, + &block_error, + &block_count); + if (rc >= 0) { + c->block_error.stat[1 + layer].scale = FE_SCALE_COUNTER; + c->block_error.stat[1 + layer].uvalue += block_error; + c->block_count.stat[1 + layer].scale = FE_SCALE_COUNTER; + c->block_count.stat[1 + layer].uvalue += block_count; + } else if (rc != -EBUSY) { + /* + * If an I/O error happened, + * measures are now unavailable + */ + c->block_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; + dev_err(&state->i2c->dev, + "%s: Can't get PER for layer %c (error %d).\n", + __func__, 'A' + layer, rc); + + } + if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE) + per_layers++; + + /* Update total preBER */ + t_pre_bit_error += c->pre_bit_error.stat[1 + layer].uvalue; + t_pre_bit_count += c->pre_bit_count.stat[1 + layer].uvalue; + + /* Update total postBER */ + t_post_bit_error += c->post_bit_error.stat[1 + layer].uvalue; + t_post_bit_count += c->post_bit_count.stat[1 + layer].uvalue; + + /* Update total PER */ + t_block_error += c->block_error.stat[1 + layer].uvalue; + t_block_count += c->block_count.stat[1 + layer].uvalue; + } + } + + /* + * Start showing global count if at least one error count is + * available. + */ + if (pre_ber_layers) { + /* + * At least one per-layer BER measure was read. We can now + * calculate the total BER + * + * Total Bit Error/Count is calculated as the sum of the + * bit errors on all active layers. + */ + c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[0].uvalue = t_pre_bit_error; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[0].uvalue = t_pre_bit_count; + } else { + c->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + } + + /* + * Start showing global count if at least one error count is + * available. + */ + if (post_ber_layers) { + /* + * At least one per-layer BER measure was read. We can now + * calculate the total BER + * + * Total Bit Error/Count is calculated as the sum of the + * bit errors on all active layers. + */ + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue = t_post_bit_error; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].uvalue = t_post_bit_count; + } else { + c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + } + + if (per_layers) { + /* + * At least one per-layer UCB measure was read. We can now + * calculate the total UCB + * + * Total block Error/Count is calculated as the sum of the + * block errors on all active layers. + */ + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_error.stat[0].uvalue = t_block_error; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].uvalue = t_block_count; + } else { + c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + } + + return rc; +} + +/* + * The functions below are called via DVB callbacks, so they need to + * properly use the I2C gate control + */ + +static int mb86a20s_initfe(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + u64 pll; + u32 fclk; + int rc; + u8 regD5 = 1, reg71, reg09 = 0x3a; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + /* Initialize the frontend */ + rc = mb86a20s_writeregdata(state, mb86a20s_init1); + if (rc < 0) + goto err; + + if (!state->inversion) + reg09 |= 0x04; + rc = mb86a20s_writereg(state, 0x09, reg09); + if (rc < 0) + goto err; + if (!state->bw) + reg71 = 1; + else + reg71 = 0; + rc = mb86a20s_writereg(state, 0x39, reg71); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x71, state->bw); + if (rc < 0) + goto err; + if (state->subchannel) { + rc = mb86a20s_writereg(state, 0x44, state->subchannel); + if (rc < 0) + goto err; + } + + fclk = state->config->fclk; + if (!fclk) + fclk = 32571428; + + /* Adjust IF frequency to match tuner */ + if (fe->ops.tuner_ops.get_if_frequency) + fe->ops.tuner_ops.get_if_frequency(fe, &state->if_freq); + + if (!state->if_freq) + state->if_freq = 3300000; + + pll = (((u64)1) << 34) * state->if_freq; + do_div(pll, 63 * fclk); + pll = (1 << 25) - pll; + rc = mb86a20s_writereg(state, 0x28, 0x2a); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x29, (pll >> 16) & 0xff); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x2a, (pll >> 8) & 0xff); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x2b, pll & 0xff); + if (rc < 0) + goto err; + dev_dbg(&state->i2c->dev, "%s: fclk=%d, IF=%d, clock reg=0x%06llx\n", + __func__, fclk, state->if_freq, (long long)pll); + + /* pll = freq[Hz] * 2^24/10^6 / 16.285714286 */ + pll = state->if_freq * 1677721600L; + do_div(pll, 1628571429L); + rc = mb86a20s_writereg(state, 0x28, 0x20); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x29, (pll >> 16) & 0xff); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x2a, (pll >> 8) & 0xff); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x2b, pll & 0xff); + if (rc < 0) + goto err; + dev_dbg(&state->i2c->dev, "%s: IF=%d, IF reg=0x%06llx\n", + __func__, state->if_freq, (long long)pll); + + if (!state->config->is_serial) + regD5 &= ~1; + + rc = mb86a20s_writereg(state, 0x50, 0xd5); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x51, regD5); + if (rc < 0) + goto err; + + rc = mb86a20s_writeregdata(state, mb86a20s_init2); + if (rc < 0) + goto err; + + +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (rc < 0) { + state->need_init = true; + dev_info(&state->i2c->dev, + "mb86a20s: Init failed. Will try again later\n"); + } else { + state->need_init = false; + dev_dbg(&state->i2c->dev, "Initialization succeeded.\n"); + } + return rc; +} + +static int mb86a20s_set_frontend(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc, if_freq; + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (!c->isdbt_layer_enabled) + c->isdbt_layer_enabled = 7; + + if (c->isdbt_layer_enabled == 1) + state->bw = MB86A20S_1SEG; + else if (c->isdbt_partial_reception) + state->bw = MB86A20S_13SEG_PARTIAL; + else + state->bw = MB86A20S_13SEG; + + if (c->inversion == INVERSION_ON) + state->inversion = true; + else + state->inversion = false; + + if (!c->isdbt_sb_mode) { + state->subchannel = 0; + } else { + if (c->isdbt_sb_subchannel >= ARRAY_SIZE(mb86a20s_subchannel)) + c->isdbt_sb_subchannel = 0; + + state->subchannel = mb86a20s_subchannel[c->isdbt_sb_subchannel]; + } + + /* + * Gate should already be opened, but it doesn't hurt to + * double-check + */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + fe->ops.tuner_ops.set_params(fe); + + if (fe->ops.tuner_ops.get_if_frequency) + fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); + + /* + * Make it more reliable: if, for some reason, the initial + * device initialization doesn't happen, initialize it when + * a SBTVD parameters are adjusted. + * + * Unfortunately, due to a hard to track bug at tda829x/tda18271, + * the agc callback logic is not called during DVB attach time, + * causing mb86a20s to not be initialized with Kworld SBTVD. + * So, this hack is needed, in order to make Kworld SBTVD to work. + * + * It is also needed to change the IF after the initial init. + * + * HACK: Always init the frontend when set_frontend is called: + * it was noticed that, on some devices, it fails to lock on a + * different channel. So, it is better to reset everything, even + * wasting some time, than to loose channel lock. + */ + mb86a20s_initfe(fe); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception); + mb86a20s_reset_counters(fe); + mb86a20s_stats_not_ready(fe); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + return rc; +} + +static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe, + fe_status_t *status) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc, status_nr; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + /* Get lock */ + status_nr = mb86a20s_read_status(fe, status); + if (status_nr < 7) { + mb86a20s_stats_not_ready(fe); + mb86a20s_reset_frontend_cache(fe); + } + if (status_nr < 0) { + dev_err(&state->i2c->dev, + "%s: Can't read frontend lock status\n", __func__); + goto error; + } + + /* Get signal strength */ + rc = mb86a20s_read_signal_strength(fe); + if (rc < 0) { + dev_err(&state->i2c->dev, + "%s: Can't reset VBER registers.\n", __func__); + mb86a20s_stats_not_ready(fe); + mb86a20s_reset_frontend_cache(fe); + + rc = 0; /* Status is OK */ + goto error; + } + + if (status_nr >= 7) { + /* Get TMCC info*/ + rc = mb86a20s_get_frontend(fe); + if (rc < 0) { + dev_err(&state->i2c->dev, + "%s: Can't get FE TMCC data.\n", __func__); + rc = 0; /* Status is OK */ + goto error; + } + + /* Get statistics */ + rc = mb86a20s_get_stats(fe, status_nr); + if (rc < 0 && rc != -EBUSY) { + dev_err(&state->i2c->dev, + "%s: Can't get FE statistics.\n", __func__); + rc = 0; + goto error; + } + rc = 0; /* Don't return EBUSY to userspace */ + } + goto ok; + +error: + mb86a20s_stats_not_ready(fe); + +ok: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + return rc; +} + +static int mb86a20s_read_signal_strength_from_cache(struct dvb_frontend *fe, + u16 *strength) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + + *strength = c->strength.stat[0].uvalue; + + return 0; +} + +static int mb86a20s_get_frontend_dummy(struct dvb_frontend *fe) +{ + /* + * get_frontend is now handled together with other stats + * retrival, when read_status() is called, as some statistics + * will depend on the layers detection. + */ + return 0; +}; + +static int mb86a20s_tune(struct dvb_frontend *fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + fe_status_t *status) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc = 0; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (re_tune) + rc = mb86a20s_set_frontend(fe); + + if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) + mb86a20s_read_status_and_stats(fe, status); + + return rc; +} + +static void mb86a20s_release(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + kfree(state); +} + +static struct dvb_frontend_ops mb86a20s_ops; + +struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config, + struct i2c_adapter *i2c) +{ + struct mb86a20s_state *state; + u8 rev; + + dev_dbg(&i2c->dev, "%s called.\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL); + if (state == NULL) { + dev_err(&i2c->dev, + "%s: unable to allocate memory for state\n", __func__); + goto error; + } + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &mb86a20s_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + /* Check if it is a mb86a20s frontend */ + rev = mb86a20s_readreg(state, 0); + + if (rev == 0x13) { + dev_info(&i2c->dev, + "Detected a Fujitsu mb86a20s frontend\n"); + } else { + dev_dbg(&i2c->dev, + "Frontend revision %d is unknown - aborting.\n", + rev); + goto error; + } + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(mb86a20s_attach); + +static struct dvb_frontend_ops mb86a20s_ops = { + .delsys = { SYS_ISDBT }, + /* Use dib8000 values per default */ + .info = { + .name = "Fujitsu mb86A20s", + .caps = FE_CAN_RECOVER | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_QAM_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO, + /* Actually, those values depend on the used tuner */ + .frequency_min = 45000000, + .frequency_max = 864000000, + .frequency_stepsize = 62500, + }, + + .release = mb86a20s_release, + + .init = mb86a20s_initfe, + .set_frontend = mb86a20s_set_frontend, + .get_frontend = mb86a20s_get_frontend_dummy, + .read_status = mb86a20s_read_status_and_stats, + .read_signal_strength = mb86a20s_read_signal_strength_from_cache, + .tune = mb86a20s_tune, +}; + +MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware"); +MODULE_AUTHOR("Mauro Carvalho Chehab "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/mb86a20s.h b/drivers/media/dvb-frontends/mb86a20s.h new file mode 100644 index 00000000..6627a397 --- /dev/null +++ b/drivers/media/dvb-frontends/mb86a20s.h @@ -0,0 +1,56 @@ +/* + * Fujitsu mb86a20s driver + * + * Copyright (C) 2010 Mauro Carvalho Chehab + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef MB86A20S_H +#define MB86A20S_H + +#include +#include + +/** + * struct mb86a20s_config - Define the per-device attributes of the frontend + * + * @fclk: Clock frequency. If zero, assumes the default + * (32.57142 Mhz) + * @demod_address: the demodulator's i2c address + * @is_serial: if true, TS is serial. Otherwise, TS is parallel + */ + +struct mb86a20s_config { + u32 fclk; + u8 demod_address; + bool is_serial; +}; + +#if IS_ENABLED(CONFIG_DVB_MB86A20S) +extern struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config, + struct i2c_adapter *i2c); +extern struct i2c_adapter *mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *); +#else +static inline struct dvb_frontend *mb86a20s_attach( + const struct mb86a20s_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static struct i2c_adapter * + mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* MB86A20S */ diff --git a/drivers/media/dvb-frontends/mt312.c b/drivers/media/dvb-frontends/mt312.c new file mode 100644 index 00000000..a74ac0dd --- /dev/null +++ b/drivers/media/dvb-frontends/mt312.c @@ -0,0 +1,847 @@ +/* + Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder + + Copyright (C) 2003 Andreas Oberritter + Copyright (C) 2008 Matthias Schwarzott + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + References: + http://products.zarlink.com/product_profiles/MT312.htm + http://products.zarlink.com/product_profiles/SL1935.htm +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "mt312_priv.h" +#include "mt312.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +struct mt312_state { + struct i2c_adapter *i2c; + /* configuration settings */ + const struct mt312_config *config; + struct dvb_frontend frontend; + + u8 id; + unsigned long xtal; + u8 freq_mult; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "mt312: " args); \ + } while (0) + +#define MT312_PLL_CLK 10000000UL /* 10 MHz */ +#define MT312_PLL_CLK_10_111 10111000UL /* 10.111 MHz */ + +static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg, + u8 *buf, const size_t count) +{ + int ret; + struct i2c_msg msg[2]; + u8 regbuf[1] = { reg }; + + msg[0].addr = state->config->demod_address; + msg[0].flags = 0; + msg[0].buf = regbuf; + msg[0].len = 1; + msg[1].addr = state->config->demod_address; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + if (debug) { + int i; + dprintk("R(%d):", reg & 0x7f); + for (i = 0; i < count; i++) + printk(KERN_CONT " %02x", buf[i]); + printk("\n"); + } + + return 0; +} + +static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg, + const u8 *src, const size_t count) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg; + + if (1 + count > sizeof(buf)) { + printk(KERN_WARNING + "mt312: write: len=%zd is too big!\n", count); + return -EINVAL; + } + + if (debug) { + int i; + dprintk("W(%d):", reg & 0x7f); + for (i = 0; i < count; i++) + printk(KERN_CONT " %02x", src[i]); + printk("\n"); + } + + buf[0] = reg; + memcpy(&buf[1], src, count); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.buf = buf; + msg.len = count + 1; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) { + dprintk("%s: ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + return 0; +} + +static inline int mt312_readreg(struct mt312_state *state, + const enum mt312_reg_addr reg, u8 *val) +{ + return mt312_read(state, reg, val, 1); +} + +static inline int mt312_writereg(struct mt312_state *state, + const enum mt312_reg_addr reg, const u8 val) +{ + return mt312_write(state, reg, &val, 1); +} + +static inline u32 mt312_div(u32 a, u32 b) +{ + return (a + (b / 2)) / b; +} + +static int mt312_reset(struct mt312_state *state, const u8 full) +{ + return mt312_writereg(state, RESET, full ? 0x80 : 0x40); +} + +static int mt312_get_inversion(struct mt312_state *state, + fe_spectral_inversion_t *i) +{ + int ret; + u8 vit_mode; + + ret = mt312_readreg(state, VIT_MODE, &vit_mode); + if (ret < 0) + return ret; + + if (vit_mode & 0x80) /* auto inversion was used */ + *i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF; + + return 0; +} + +static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr) +{ + int ret; + u8 sym_rate_h; + u8 dec_ratio; + u16 sym_rat_op; + u16 monitor; + u8 buf[2]; + + ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h); + if (ret < 0) + return ret; + + if (sym_rate_h & 0x80) { + /* symbol rate search was used */ + ret = mt312_writereg(state, MON_CTRL, 0x03); + if (ret < 0) + return ret; + + ret = mt312_read(state, MONITOR_H, buf, sizeof(buf)); + if (ret < 0) + return ret; + + monitor = (buf[0] << 8) | buf[1]; + + dprintk("sr(auto) = %u\n", + mt312_div(monitor * 15625, 4)); + } else { + ret = mt312_writereg(state, MON_CTRL, 0x05); + if (ret < 0) + return ret; + + ret = mt312_read(state, MONITOR_H, buf, sizeof(buf)); + if (ret < 0) + return ret; + + dec_ratio = ((buf[0] >> 5) & 0x07) * 32; + + ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf)); + if (ret < 0) + return ret; + + sym_rat_op = (buf[0] << 8) | buf[1]; + + dprintk("sym_rat_op=%d dec_ratio=%d\n", + sym_rat_op, dec_ratio); + dprintk("*sr(manual) = %lu\n", + (((state->xtal * 8192) / (sym_rat_op + 8192)) * + 2) - dec_ratio); + } + + return 0; +} + +static int mt312_get_code_rate(struct mt312_state *state, fe_code_rate_t *cr) +{ + const fe_code_rate_t fec_tab[8] = + { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8, + FEC_AUTO, FEC_AUTO }; + + int ret; + u8 fec_status; + + ret = mt312_readreg(state, FEC_STATUS, &fec_status); + if (ret < 0) + return ret; + + *cr = fec_tab[(fec_status >> 4) & 0x07]; + + return 0; +} + +static int mt312_initfe(struct dvb_frontend *fe) +{ + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 buf[2]; + + /* wake up */ + ret = mt312_writereg(state, CONFIG, + (state->freq_mult == 6 ? 0x88 : 0x8c)); + if (ret < 0) + return ret; + + /* wait at least 150 usec */ + udelay(150); + + /* full reset */ + ret = mt312_reset(state, 1); + if (ret < 0) + return ret; + +/* Per datasheet, write correct values. 09/28/03 ACCJr. + * If we don't do this, we won't get FE_HAS_VITERBI in the VP310. */ + { + u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02, + 0x01, 0x00, 0x00, 0x00 }; + + ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def)); + if (ret < 0) + return ret; + } + + switch (state->id) { + case ID_ZL10313: + /* enable ADC */ + ret = mt312_writereg(state, GPP_CTRL, 0x80); + if (ret < 0) + return ret; + + /* configure ZL10313 for optimal ADC performance */ + buf[0] = 0x80; + buf[1] = 0xB0; + ret = mt312_write(state, HW_CTRL, buf, 2); + if (ret < 0) + return ret; + + /* enable MPEG output and ADCs */ + ret = mt312_writereg(state, HW_CTRL, 0x00); + if (ret < 0) + return ret; + + ret = mt312_writereg(state, MPEG_CTRL, 0x00); + if (ret < 0) + return ret; + + break; + } + + /* SYS_CLK */ + buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000); + + /* DISEQC_RATIO */ + buf[1] = mt312_div(state->xtal, 22000 * 4); + + ret = mt312_write(state, SYS_CLK, buf, sizeof(buf)); + if (ret < 0) + return ret; + + ret = mt312_writereg(state, SNR_THS_HIGH, 0x32); + if (ret < 0) + return ret; + + /* different MOCLK polarity */ + switch (state->id) { + case ID_ZL10313: + buf[0] = 0x33; + break; + default: + buf[0] = 0x53; + break; + } + + ret = mt312_writereg(state, OP_CTRL, buf[0]); + if (ret < 0) + return ret; + + /* TS_SW_LIM */ + buf[0] = 0x8c; + buf[1] = 0x98; + + ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf)); + if (ret < 0) + return ret; + + ret = mt312_writereg(state, CS_SW_LIM, 0x69); + if (ret < 0) + return ret; + + return 0; +} + +static int mt312_send_master_cmd(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *c) +{ + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 diseqc_mode; + + if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg))) + return -EINVAL; + + ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode); + if (ret < 0) + return ret; + + ret = mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len); + if (ret < 0) + return ret; + + ret = mt312_writereg(state, DISEQC_MODE, + (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3) + | 0x04); + if (ret < 0) + return ret; + + /* is there a better way to wait for message to be transmitted */ + msleep(100); + + /* set DISEQC_MODE[2:0] to zero if a return message is expected */ + if (c->msg[0] & 0x02) { + ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40)); + if (ret < 0) + return ret; + } + + return 0; +} + +static int mt312_send_burst(struct dvb_frontend *fe, const fe_sec_mini_cmd_t c) +{ + struct mt312_state *state = fe->demodulator_priv; + const u8 mini_tab[2] = { 0x02, 0x03 }; + + int ret; + u8 diseqc_mode; + + if (c > SEC_MINI_B) + return -EINVAL; + + ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode); + if (ret < 0) + return ret; + + ret = mt312_writereg(state, DISEQC_MODE, + (diseqc_mode & 0x40) | mini_tab[c]); + if (ret < 0) + return ret; + + return 0; +} + +static int mt312_set_tone(struct dvb_frontend *fe, const fe_sec_tone_mode_t t) +{ + struct mt312_state *state = fe->demodulator_priv; + const u8 tone_tab[2] = { 0x01, 0x00 }; + + int ret; + u8 diseqc_mode; + + if (t > SEC_TONE_OFF) + return -EINVAL; + + ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode); + if (ret < 0) + return ret; + + ret = mt312_writereg(state, DISEQC_MODE, + (diseqc_mode & 0x40) | tone_tab[t]); + if (ret < 0) + return ret; + + return 0; +} + +static int mt312_set_voltage(struct dvb_frontend *fe, const fe_sec_voltage_t v) +{ + struct mt312_state *state = fe->demodulator_priv; + const u8 volt_tab[3] = { 0x00, 0x40, 0x00 }; + u8 val; + + if (v > SEC_VOLTAGE_OFF) + return -EINVAL; + + val = volt_tab[v]; + if (state->config->voltage_inverted) + val ^= 0x40; + + return mt312_writereg(state, DISEQC_MODE, val); +} + +static int mt312_read_status(struct dvb_frontend *fe, fe_status_t *s) +{ + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 status[3]; + + *s = 0; + + ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status)); + if (ret < 0) + return ret; + + dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x," + " FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]); + + if (status[0] & 0xc0) + *s |= FE_HAS_SIGNAL; /* signal noise ratio */ + if (status[0] & 0x04) + *s |= FE_HAS_CARRIER; /* qpsk carrier lock */ + if (status[2] & 0x02) + *s |= FE_HAS_VITERBI; /* viterbi lock */ + if (status[2] & 0x04) + *s |= FE_HAS_SYNC; /* byte align lock */ + if (status[0] & 0x01) + *s |= FE_HAS_LOCK; /* qpsk lock */ + + return 0; +} + +static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 buf[3]; + + ret = mt312_read(state, RS_BERCNT_H, buf, 3); + if (ret < 0) + return ret; + + *ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64; + + return 0; +} + +static int mt312_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 buf[3]; + u16 agc; + s16 err_db; + + ret = mt312_read(state, AGC_H, buf, sizeof(buf)); + if (ret < 0) + return ret; + + agc = (buf[0] << 6) | (buf[1] >> 2); + err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6; + + *signal_strength = agc; + + dprintk("agc=%08x err_db=%hd\n", agc, err_db); + + return 0; +} + +static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 buf[2]; + + ret = mt312_read(state, M_SNR_H, buf, sizeof(buf)); + if (ret < 0) + return ret; + + *snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1); + + return 0; +} + +static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc) +{ + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 buf[2]; + + ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf)); + if (ret < 0) + return ret; + + *ubc = (buf[0] << 8) | buf[1]; + + return 0; +} + +static int mt312_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 buf[5], config_val; + u16 sr; + + const u8 fec_tab[10] = + { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f }; + const u8 inv_tab[3] = { 0x00, 0x40, 0x80 }; + + dprintk("%s: Freq %d\n", __func__, p->frequency); + + if ((p->frequency < fe->ops.info.frequency_min) + || (p->frequency > fe->ops.info.frequency_max)) + return -EINVAL; + + if (((int)p->inversion < INVERSION_OFF) + || (p->inversion > INVERSION_ON)) + return -EINVAL; + + if ((p->symbol_rate < fe->ops.info.symbol_rate_min) + || (p->symbol_rate > fe->ops.info.symbol_rate_max)) + return -EINVAL; + + if (((int)p->fec_inner < FEC_NONE) + || (p->fec_inner > FEC_AUTO)) + return -EINVAL; + + if ((p->fec_inner == FEC_4_5) + || (p->fec_inner == FEC_8_9)) + return -EINVAL; + + switch (state->id) { + case ID_VP310: + /* For now we will do this only for the VP310. + * It should be better for the mt312 as well, + * but tuning will be slower. ACCJr 09/29/03 + */ + ret = mt312_readreg(state, CONFIG, &config_val); + if (ret < 0) + return ret; + if (p->symbol_rate >= 30000000) { + /* Note that 30MS/s should use 90MHz */ + if (state->freq_mult == 6) { + /* We are running 60MHz */ + state->freq_mult = 9; + ret = mt312_initfe(fe); + if (ret < 0) + return ret; + } + } else { + if (state->freq_mult == 9) { + /* We are running 90MHz */ + state->freq_mult = 6; + ret = mt312_initfe(fe); + if (ret < 0) + return ret; + } + } + break; + + case ID_MT312: + case ID_ZL10313: + break; + + default: + return -EINVAL; + } + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* sr = (u16)(sr * 256.0 / 1000000.0) */ + sr = mt312_div(p->symbol_rate * 4, 15625); + + /* SYM_RATE */ + buf[0] = (sr >> 8) & 0x3f; + buf[1] = (sr >> 0) & 0xff; + + /* VIT_MODE */ + buf[2] = inv_tab[p->inversion] | fec_tab[p->fec_inner]; + + /* QPSK_CTRL */ + buf[3] = 0x40; /* swap I and Q before QPSK demodulation */ + + if (p->symbol_rate < 10000000) + buf[3] |= 0x04; /* use afc mode */ + + /* GO */ + buf[4] = 0x01; + + ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf)); + if (ret < 0) + return ret; + + mt312_reset(state, 0); + + return 0; +} + +static int mt312_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct mt312_state *state = fe->demodulator_priv; + int ret; + + ret = mt312_get_inversion(state, &p->inversion); + if (ret < 0) + return ret; + + ret = mt312_get_symbol_rate(state, &p->symbol_rate); + if (ret < 0) + return ret; + + ret = mt312_get_code_rate(state, &p->fec_inner); + if (ret < 0) + return ret; + + return 0; +} + +static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct mt312_state *state = fe->demodulator_priv; + + u8 val = 0x00; + int ret; + + switch (state->id) { + case ID_ZL10313: + ret = mt312_readreg(state, GPP_CTRL, &val); + if (ret < 0) + goto error; + + /* preserve this bit to not accidentally shutdown ADC */ + val &= 0x80; + break; + } + + if (enable) + val |= 0x40; + else + val &= ~0x40; + + ret = mt312_writereg(state, GPP_CTRL, val); + +error: + return ret; +} + +static int mt312_sleep(struct dvb_frontend *fe) +{ + struct mt312_state *state = fe->demodulator_priv; + int ret; + u8 config; + + /* reset all registers to defaults */ + ret = mt312_reset(state, 1); + if (ret < 0) + return ret; + + if (state->id == ID_ZL10313) { + /* reset ADC */ + ret = mt312_writereg(state, GPP_CTRL, 0x00); + if (ret < 0) + return ret; + + /* full shutdown of ADCs, mpeg bus tristated */ + ret = mt312_writereg(state, HW_CTRL, 0x0d); + if (ret < 0) + return ret; + } + + ret = mt312_readreg(state, CONFIG, &config); + if (ret < 0) + return ret; + + /* enter standby */ + ret = mt312_writereg(state, CONFIG, config & 0x7f); + if (ret < 0) + return ret; + + return 0; +} + +static int mt312_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 50; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static void mt312_release(struct dvb_frontend *fe) +{ + struct mt312_state *state = fe->demodulator_priv; + kfree(state); +} + +#define MT312_SYS_CLK 90000000UL /* 90 MHz */ +static struct dvb_frontend_ops mt312_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Zarlink ???? DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + /* FIXME: adjust freq to real used xtal */ + .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128, + .symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */ + .symbol_rate_max = MT312_SYS_CLK / 2, + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS | + FE_CAN_RECOVER + }, + + .release = mt312_release, + + .init = mt312_initfe, + .sleep = mt312_sleep, + .i2c_gate_ctrl = mt312_i2c_gate_ctrl, + + .set_frontend = mt312_set_frontend, + .get_frontend = mt312_get_frontend, + .get_tune_settings = mt312_get_tune_settings, + + .read_status = mt312_read_status, + .read_ber = mt312_read_ber, + .read_signal_strength = mt312_read_signal_strength, + .read_snr = mt312_read_snr, + .read_ucblocks = mt312_read_ucblocks, + + .diseqc_send_master_cmd = mt312_send_master_cmd, + .diseqc_send_burst = mt312_send_burst, + .set_tone = mt312_set_tone, + .set_voltage = mt312_set_voltage, +}; + +struct dvb_frontend *mt312_attach(const struct mt312_config *config, + struct i2c_adapter *i2c) +{ + struct mt312_state *state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* check if the demod is there */ + if (mt312_readreg(state, ID, &state->id) < 0) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &mt312_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + switch (state->id) { + case ID_VP310: + strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S"); + state->xtal = MT312_PLL_CLK; + state->freq_mult = 9; + break; + case ID_MT312: + strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S"); + state->xtal = MT312_PLL_CLK; + state->freq_mult = 6; + break; + case ID_ZL10313: + strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S"); + state->xtal = MT312_PLL_CLK_10_111; + state->freq_mult = 9; + break; + default: + printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313" + " are supported chips.\n"); + goto error; + } + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(mt312_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver"); +MODULE_AUTHOR("Andreas Oberritter "); +MODULE_AUTHOR("Matthias Schwarzott "); +MODULE_LICENSE("GPL"); + diff --git a/drivers/media/dvb-frontends/mt312.h b/drivers/media/dvb-frontends/mt312.h new file mode 100644 index 00000000..5706621a --- /dev/null +++ b/drivers/media/dvb-frontends/mt312.h @@ -0,0 +1,51 @@ +/* + Driver for Zarlink MT312 Satellite Channel Decoder + + Copyright (C) 2003 Andreas Oberritter + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + References: + http://products.zarlink.com/product_profiles/MT312.htm + http://products.zarlink.com/product_profiles/SL1935.htm +*/ + +#ifndef MT312_H +#define MT312_H + +#include + +struct mt312_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* inverted voltage setting */ + unsigned int voltage_inverted:1; +}; + +#if IS_ENABLED(CONFIG_DVB_MT312) +struct dvb_frontend *mt312_attach(const struct mt312_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *mt312_attach( + const struct mt312_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_MT312 */ + +#endif /* MT312_H */ diff --git a/drivers/media/dvb-frontends/mt312_priv.h b/drivers/media/dvb-frontends/mt312_priv.h new file mode 100644 index 00000000..a3959f94 --- /dev/null +++ b/drivers/media/dvb-frontends/mt312_priv.h @@ -0,0 +1,165 @@ +/* + Driver for Zarlink MT312 QPSK Frontend + + Copyright (C) 2003 Andreas Oberritter + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef _DVB_FRONTENDS_MT312_PRIV +#define _DVB_FRONTENDS_MT312_PRIV + +enum mt312_reg_addr { + QPSK_INT_H = 0, + QPSK_INT_M = 1, + QPSK_INT_L = 2, + FEC_INT = 3, + QPSK_STAT_H = 4, + QPSK_STAT_L = 5, + FEC_STATUS = 6, + LNB_FREQ_H = 7, + LNB_FREQ_L = 8, + M_SNR_H = 9, + M_SNR_L = 10, + VIT_ERRCNT_H = 11, + VIT_ERRCNT_M = 12, + VIT_ERRCNT_L = 13, + RS_BERCNT_H = 14, + RS_BERCNT_M = 15, + RS_BERCNT_L = 16, + RS_UBC_H = 17, + RS_UBC_L = 18, + SIG_LEVEL = 19, + GPP_CTRL = 20, + RESET = 21, + DISEQC_MODE = 22, + SYM_RATE_H = 23, + SYM_RATE_L = 24, + VIT_MODE = 25, + QPSK_CTRL = 26, + GO = 27, + IE_QPSK_H = 28, + IE_QPSK_M = 29, + IE_QPSK_L = 30, + IE_FEC = 31, + QPSK_STAT_EN = 32, + FEC_STAT_EN = 33, + SYS_CLK = 34, + DISEQC_RATIO = 35, + DISEQC_INSTR = 36, + FR_LIM = 37, + FR_OFF = 38, + AGC_CTRL = 39, + AGC_INIT = 40, + AGC_REF = 41, + AGC_MAX = 42, + AGC_MIN = 43, + AGC_LK_TH = 44, + TS_AGC_LK_TH = 45, + AGC_PWR_SET = 46, + QPSK_MISC = 47, + SNR_THS_LOW = 48, + SNR_THS_HIGH = 49, + TS_SW_RATE = 50, + TS_SW_LIM_L = 51, + TS_SW_LIM_H = 52, + CS_SW_RATE_1 = 53, + CS_SW_RATE_2 = 54, + CS_SW_RATE_3 = 55, + CS_SW_RATE_4 = 56, + CS_SW_LIM = 57, + TS_LPK = 58, + TS_LPK_M = 59, + TS_LPK_L = 60, + CS_KPROP_H = 61, + CS_KPROP_L = 62, + CS_KINT_H = 63, + CS_KINT_L = 64, + QPSK_SCALE = 65, + TLD_OUTCLK_TH = 66, + TLD_INCLK_TH = 67, + FLD_TH = 68, + PLD_OUTLK3 = 69, + PLD_OUTLK2 = 70, + PLD_OUTLK1 = 71, + PLD_OUTLK0 = 72, + PLD_INLK3 = 73, + PLD_INLK2 = 74, + PLD_INLK1 = 75, + PLD_INLK0 = 76, + PLD_ACC_TIME = 77, + SWEEP_PAR = 78, + STARTUP_TIME = 79, + LOSSLOCK_TH = 80, + FEC_LOCK_TM = 81, + LOSSLOCK_TM = 82, + VIT_ERRPER_H = 83, + VIT_ERRPER_M = 84, + VIT_ERRPER_L = 85, + HW_CTRL = 84, /* ZL10313 only */ + MPEG_CTRL = 85, /* ZL10313 only */ + VIT_SETUP = 86, + VIT_REF0 = 87, + VIT_REF1 = 88, + VIT_REF2 = 89, + VIT_REF3 = 90, + VIT_REF4 = 91, + VIT_REF5 = 92, + VIT_REF6 = 93, + VIT_MAXERR = 94, + BA_SETUPT = 95, + OP_CTRL = 96, + FEC_SETUP = 97, + PROG_SYNC = 98, + AFC_SEAR_TH = 99, + CSACC_DIF_TH = 100, + QPSK_LK_CT = 101, + QPSK_ST_CT = 102, + MON_CTRL = 103, + QPSK_RESET = 104, + QPSK_TST_CT = 105, + QPSK_TST_ST = 106, + TEST_R = 107, + AGC_H = 108, + AGC_M = 109, + AGC_L = 110, + FREQ_ERR1_H = 111, + FREQ_ERR1_M = 112, + FREQ_ERR1_L = 113, + FREQ_ERR2_H = 114, + FREQ_ERR2_L = 115, + SYM_RAT_OP_H = 116, + SYM_RAT_OP_L = 117, + DESEQC2_INT = 118, + DISEQC2_STAT = 119, + DISEQC2_FIFO = 120, + DISEQC2_CTRL1 = 121, + DISEQC2_CTRL2 = 122, + MONITOR_H = 123, + MONITOR_L = 124, + TEST_MODE = 125, + ID = 126, + CONFIG = 127 +}; + +enum mt312_model_id { + ID_VP310 = 1, + ID_MT312 = 3, + ID_ZL10313 = 5, +}; + +#endif /* DVB_FRONTENDS_MT312_PRIV */ diff --git a/drivers/media/dvb-frontends/mt352.c b/drivers/media/dvb-frontends/mt352.c new file mode 100644 index 00000000..2c3b50e8 --- /dev/null +++ b/drivers/media/dvb-frontends/mt352.c @@ -0,0 +1,610 @@ +/* + * Driver for Zarlink DVB-T MT352 demodulator + * + * Written by Holger Waechtler + * and Daniel Mack + * + * AVerMedia AVerTV DVB-T 771 support by + * Wolfram Joost + * + * Support for Samsung TDTC9251DH01C(M) tuner + * Copyright (C) 2004 Antonio Mancuso + * Amauri Celani + * + * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by + * Christopher Pascoe + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "mt352_priv.h" +#include "mt352.h" + +struct mt352_state { + struct i2c_adapter* i2c; + struct dvb_frontend frontend; + + /* configuration settings */ + struct mt352_config config; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "mt352: " args); \ + } while (0) + +static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val) +{ + struct mt352_state* state = fe->demodulator_priv; + u8 buf[2] = { reg, val }; + struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0, + .buf = buf, .len = 2 }; + int err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err); + return err; + } + return 0; +} + +static int _mt352_write(struct dvb_frontend* fe, const u8 ibuf[], int ilen) +{ + int err,i; + for (i=0; i < ilen-1; i++) + if ((err = mt352_single_write(fe,ibuf[0]+i,ibuf[i+1]))) + return err; + + return 0; +} + +static int mt352_read_register(struct mt352_state* state, u8 reg) +{ + int ret; + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config.demod_address, + .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config.demod_address, + .flags = I2C_M_RD, + .buf = b1, .len = 1 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + printk("%s: readreg error (reg=%d, ret==%i)\n", + __func__, reg, ret); + return ret; + } + + return b1[0]; +} + +static int mt352_sleep(struct dvb_frontend* fe) +{ + static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 }; + + _mt352_write(fe, mt352_softdown, sizeof(mt352_softdown)); + return 0; +} + +static void mt352_calc_nominal_rate(struct mt352_state* state, + u32 bandwidth, + unsigned char *buf) +{ + u32 adc_clock = 20480; /* 20.340 MHz */ + u32 bw,value; + + switch (bandwidth) { + case 6000000: + bw = 6; + break; + case 7000000: + bw = 7; + break; + case 8000000: + default: + bw = 8; + break; + } + if (state->config.adc_clock) + adc_clock = state->config.adc_clock; + + value = 64 * bw * (1<<16) / (7 * 8); + value = value * 1000 / adc_clock; + dprintk("%s: bw %d, adc_clock %d => 0x%x\n", + __func__, bw, adc_clock, value); + buf[0] = msb(value); + buf[1] = lsb(value); +} + +static void mt352_calc_input_freq(struct mt352_state* state, + unsigned char *buf) +{ + int adc_clock = 20480; /* 20.480000 MHz */ + int if2 = 36167; /* 36.166667 MHz */ + int ife,value; + + if (state->config.adc_clock) + adc_clock = state->config.adc_clock; + if (state->config.if2) + if2 = state->config.if2; + + if (adc_clock >= if2 * 2) + ife = if2; + else { + ife = adc_clock - (if2 % adc_clock); + if (ife > adc_clock / 2) + ife = adc_clock - ife; + } + value = -16374 * ife / adc_clock; + dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n", + __func__, if2, ife, adc_clock, value, value & 0x3fff); + buf[0] = msb(value); + buf[1] = lsb(value); +} + +static int mt352_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *op = &fe->dtv_property_cache; + struct mt352_state* state = fe->demodulator_priv; + unsigned char buf[13]; + static unsigned char tuner_go[] = { 0x5d, 0x01 }; + static unsigned char fsm_go[] = { 0x5e, 0x01 }; + unsigned int tps = 0; + + switch (op->code_rate_HP) { + case FEC_2_3: + tps |= (1 << 7); + break; + case FEC_3_4: + tps |= (2 << 7); + break; + case FEC_5_6: + tps |= (3 << 7); + break; + case FEC_7_8: + tps |= (4 << 7); + break; + case FEC_1_2: + case FEC_AUTO: + break; + default: + return -EINVAL; + } + + switch (op->code_rate_LP) { + case FEC_2_3: + tps |= (1 << 4); + break; + case FEC_3_4: + tps |= (2 << 4); + break; + case FEC_5_6: + tps |= (3 << 4); + break; + case FEC_7_8: + tps |= (4 << 4); + break; + case FEC_1_2: + case FEC_AUTO: + break; + case FEC_NONE: + if (op->hierarchy == HIERARCHY_AUTO || + op->hierarchy == HIERARCHY_NONE) + break; + default: + return -EINVAL; + } + + switch (op->modulation) { + case QPSK: + break; + case QAM_AUTO: + case QAM_16: + tps |= (1 << 13); + break; + case QAM_64: + tps |= (2 << 13); + break; + default: + return -EINVAL; + } + + switch (op->transmission_mode) { + case TRANSMISSION_MODE_2K: + case TRANSMISSION_MODE_AUTO: + break; + case TRANSMISSION_MODE_8K: + tps |= (1 << 0); + break; + default: + return -EINVAL; + } + + switch (op->guard_interval) { + case GUARD_INTERVAL_1_32: + case GUARD_INTERVAL_AUTO: + break; + case GUARD_INTERVAL_1_16: + tps |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + tps |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + tps |= (3 << 2); + break; + default: + return -EINVAL; + } + + switch (op->hierarchy) { + case HIERARCHY_AUTO: + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + tps |= (1 << 10); + break; + case HIERARCHY_2: + tps |= (2 << 10); + break; + case HIERARCHY_4: + tps |= (3 << 10); + break; + default: + return -EINVAL; + } + + + buf[0] = TPS_GIVEN_1; /* TPS_GIVEN_1 and following registers */ + + buf[1] = msb(tps); /* TPS_GIVEN_(1|0) */ + buf[2] = lsb(tps); + + buf[3] = 0x50; // old +// buf[3] = 0xf4; // pinnacle + + mt352_calc_nominal_rate(state, op->bandwidth_hz, buf+4); + mt352_calc_input_freq(state, buf+6); + + if (state->config.no_tuner) { + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + _mt352_write(fe, buf, 8); + _mt352_write(fe, fsm_go, 2); + } else { + if (fe->ops.tuner_ops.calc_regs) { + fe->ops.tuner_ops.calc_regs(fe, buf+8, 5); + buf[8] <<= 1; + _mt352_write(fe, buf, sizeof(buf)); + _mt352_write(fe, tuner_go, 2); + } + } + + return 0; +} + +static int mt352_get_parameters(struct dvb_frontend* fe) +{ + struct dtv_frontend_properties *op = &fe->dtv_property_cache; + struct mt352_state* state = fe->demodulator_priv; + u16 tps; + u16 div; + u8 trl; + static const u8 tps_fec_to_api[8] = + { + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_5_6, + FEC_7_8, + FEC_AUTO, + FEC_AUTO, + FEC_AUTO + }; + + if ( (mt352_read_register(state,0x00) & 0xC0) != 0xC0 ) + return -EINVAL; + + /* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because + * the mt352 sometimes works with the wrong parameters + */ + tps = (mt352_read_register(state, TPS_RECEIVED_1) << 8) | mt352_read_register(state, TPS_RECEIVED_0); + div = (mt352_read_register(state, CHAN_START_1) << 8) | mt352_read_register(state, CHAN_START_0); + trl = mt352_read_register(state, TRL_NOMINAL_RATE_1); + + op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7]; + op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7]; + + switch ( (tps >> 13) & 3) + { + case 0: + op->modulation = QPSK; + break; + case 1: + op->modulation = QAM_16; + break; + case 2: + op->modulation = QAM_64; + break; + default: + op->modulation = QAM_AUTO; + break; + } + + op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : TRANSMISSION_MODE_2K; + + switch ( (tps >> 2) & 3) + { + case 0: + op->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + op->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + op->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + op->guard_interval = GUARD_INTERVAL_1_4; + break; + default: + op->guard_interval = GUARD_INTERVAL_AUTO; + break; + } + + switch ( (tps >> 10) & 7) + { + case 0: + op->hierarchy = HIERARCHY_NONE; + break; + case 1: + op->hierarchy = HIERARCHY_1; + break; + case 2: + op->hierarchy = HIERARCHY_2; + break; + case 3: + op->hierarchy = HIERARCHY_4; + break; + default: + op->hierarchy = HIERARCHY_AUTO; + break; + } + + op->frequency = (500 * (div - IF_FREQUENCYx6)) / 3 * 1000; + + if (trl == 0x72) + op->bandwidth_hz = 8000000; + else if (trl == 0x64) + op->bandwidth_hz = 7000000; + else + op->bandwidth_hz = 6000000; + + + if (mt352_read_register(state, STATUS_2) & 0x02) + op->inversion = INVERSION_OFF; + else + op->inversion = INVERSION_ON; + + return 0; +} + +static int mt352_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct mt352_state* state = fe->demodulator_priv; + int s0, s1, s3; + + /* FIXME: + * + * The MT352 design manual from Zarlink states (page 46-47): + * + * Notes about the TUNER_GO register: + * + * If the Read_Tuner_Byte (bit-1) is activated, then the tuner status + * byte is copied from the tuner to the STATUS_3 register and + * completion of the read operation is indicated by bit-5 of the + * INTERRUPT_3 register. + */ + + if ((s0 = mt352_read_register(state, STATUS_0)) < 0) + return -EREMOTEIO; + if ((s1 = mt352_read_register(state, STATUS_1)) < 0) + return -EREMOTEIO; + if ((s3 = mt352_read_register(state, STATUS_3)) < 0) + return -EREMOTEIO; + + *status = 0; + if (s0 & (1 << 4)) + *status |= FE_HAS_CARRIER; + if (s0 & (1 << 1)) + *status |= FE_HAS_VITERBI; + if (s0 & (1 << 5)) + *status |= FE_HAS_LOCK; + if (s1 & (1 << 1)) + *status |= FE_HAS_SYNC; + if (s3 & (1 << 6)) + *status |= FE_HAS_SIGNAL; + + if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != + (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) + *status &= ~FE_HAS_LOCK; + + return 0; +} + +static int mt352_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct mt352_state* state = fe->demodulator_priv; + + *ber = (mt352_read_register (state, RS_ERR_CNT_2) << 16) | + (mt352_read_register (state, RS_ERR_CNT_1) << 8) | + (mt352_read_register (state, RS_ERR_CNT_0)); + + return 0; +} + +static int mt352_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct mt352_state* state = fe->demodulator_priv; + + /* align the 12 bit AGC gain with the most significant bits */ + u16 signal = ((mt352_read_register(state, AGC_GAIN_1) & 0x0f) << 12) | + (mt352_read_register(state, AGC_GAIN_0) << 4); + + /* inverse of gain is signal strength */ + *strength = ~signal; + return 0; +} + +static int mt352_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct mt352_state* state = fe->demodulator_priv; + + u8 _snr = mt352_read_register (state, SNR); + *snr = (_snr << 8) | _snr; + + return 0; +} + +static int mt352_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct mt352_state* state = fe->demodulator_priv; + + *ucblocks = (mt352_read_register (state, RS_UBC_1) << 8) | + (mt352_read_register (state, RS_UBC_0)); + + return 0; +} + +static int mt352_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) +{ + fe_tune_settings->min_delay_ms = 800; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + + return 0; +} + +static int mt352_init(struct dvb_frontend* fe) +{ + struct mt352_state* state = fe->demodulator_priv; + + static u8 mt352_reset_attach [] = { RESET, 0xC0 }; + + dprintk("%s: hello\n",__func__); + + if ((mt352_read_register(state, CLOCK_CTL) & 0x10) == 0 || + (mt352_read_register(state, CONFIG) & 0x20) == 0) { + + /* Do a "hard" reset */ + _mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach)); + return state->config.demod_init(fe); + } + + return 0; +} + +static void mt352_release(struct dvb_frontend* fe) +{ + struct mt352_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops mt352_ops; + +struct dvb_frontend* mt352_attach(const struct mt352_config* config, + struct i2c_adapter* i2c) +{ + struct mt352_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct mt352_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->i2c = i2c; + memcpy(&state->config,config,sizeof(struct mt352_config)); + + /* check if the demod is there */ + if (mt352_read_register(state, CHIP_ID) != ID_MT352) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &mt352_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops mt352_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Zarlink MT352 DVB-T", + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 166667, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = mt352_release, + + .init = mt352_init, + .sleep = mt352_sleep, + .write = _mt352_write, + + .set_frontend = mt352_set_parameters, + .get_frontend = mt352_get_parameters, + .get_tune_settings = mt352_get_tune_settings, + + .read_status = mt352_read_status, + .read_ber = mt352_read_ber, + .read_signal_strength = mt352_read_signal_strength, + .read_snr = mt352_read_snr, + .read_ucblocks = mt352_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Zarlink MT352 DVB-T Demodulator driver"); +MODULE_AUTHOR("Holger Waechtler, Daniel Mack, Antonio Mancuso"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(mt352_attach); diff --git a/drivers/media/dvb-frontends/mt352.h b/drivers/media/dvb-frontends/mt352.h new file mode 100644 index 00000000..451d904e --- /dev/null +++ b/drivers/media/dvb-frontends/mt352.h @@ -0,0 +1,73 @@ +/* + * Driver for Zarlink DVB-T MT352 demodulator + * + * Written by Holger Waechtler + * and Daniel Mack + * + * AVerMedia AVerTV DVB-T 771 support by + * Wolfram Joost + * + * Support for Samsung TDTC9251DH01C(M) tuner + * Copyright (C) 2004 Antonio Mancuso + * Amauri Celani + * + * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by + * Christopher Pascoe + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef MT352_H +#define MT352_H + +#include + +struct mt352_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* frequencies in kHz */ + int adc_clock; // default: 20480 + int if2; // default: 36166 + + /* set if no pll is connected to the secondary i2c bus */ + int no_tuner; + + /* Initialise the demodulator and PLL. Cannot be NULL */ + int (*demod_init)(struct dvb_frontend* fe); +}; + +#if IS_ENABLED(CONFIG_DVB_MT352) +extern struct dvb_frontend* mt352_attach(const struct mt352_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* mt352_attach(const struct mt352_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_MT352 + +static inline int mt352_write(struct dvb_frontend *fe, const u8 buf[], int len) { + int r = 0; + if (fe->ops.write) + r = fe->ops.write(fe, buf, len); + return r; +} + +#endif // MT352_H diff --git a/drivers/media/dvb-frontends/mt352_priv.h b/drivers/media/dvb-frontends/mt352_priv.h new file mode 100644 index 00000000..44ad0d4c --- /dev/null +++ b/drivers/media/dvb-frontends/mt352_priv.h @@ -0,0 +1,127 @@ +/* + * Driver for Zarlink DVB-T MT352 demodulator + * + * Written by Holger Waechtler + * and Daniel Mack + * + * AVerMedia AVerTV DVB-T 771 support by + * Wolfram Joost + * + * Support for Samsung TDTC9251DH01C(M) tuner + * Copyright (C) 2004 Antonio Mancuso + * Amauri Celani + * + * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by + * Christopher Pascoe + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef _MT352_PRIV_ +#define _MT352_PRIV_ + +#define ID_MT352 0x13 + +#define msb(x) (((x) >> 8) & 0xff) +#define lsb(x) ((x) & 0xff) + +enum mt352_reg_addr { + STATUS_0 = 0x00, + STATUS_1 = 0x01, + STATUS_2 = 0x02, + STATUS_3 = 0x03, + STATUS_4 = 0x04, + INTERRUPT_0 = 0x05, + INTERRUPT_1 = 0x06, + INTERRUPT_2 = 0x07, + INTERRUPT_3 = 0x08, + SNR = 0x09, + VIT_ERR_CNT_2 = 0x0A, + VIT_ERR_CNT_1 = 0x0B, + VIT_ERR_CNT_0 = 0x0C, + RS_ERR_CNT_2 = 0x0D, + RS_ERR_CNT_1 = 0x0E, + RS_ERR_CNT_0 = 0x0F, + RS_UBC_1 = 0x10, + RS_UBC_0 = 0x11, + AGC_GAIN_3 = 0x12, + AGC_GAIN_2 = 0x13, + AGC_GAIN_1 = 0x14, + AGC_GAIN_0 = 0x15, + FREQ_OFFSET_2 = 0x17, + FREQ_OFFSET_1 = 0x18, + FREQ_OFFSET_0 = 0x19, + TIMING_OFFSET_1 = 0x1A, + TIMING_OFFSET_0 = 0x1B, + CHAN_FREQ_1 = 0x1C, + CHAN_FREQ_0 = 0x1D, + TPS_RECEIVED_1 = 0x1E, + TPS_RECEIVED_0 = 0x1F, + TPS_CURRENT_1 = 0x20, + TPS_CURRENT_0 = 0x21, + TPS_CELL_ID_1 = 0x22, + TPS_CELL_ID_0 = 0x23, + TPS_MISC_DATA_2 = 0x24, + TPS_MISC_DATA_1 = 0x25, + TPS_MISC_DATA_0 = 0x26, + RESET = 0x50, + TPS_GIVEN_1 = 0x51, + TPS_GIVEN_0 = 0x52, + ACQ_CTL = 0x53, + TRL_NOMINAL_RATE_1 = 0x54, + TRL_NOMINAL_RATE_0 = 0x55, + INPUT_FREQ_1 = 0x56, + INPUT_FREQ_0 = 0x57, + TUNER_ADDR = 0x58, + CHAN_START_1 = 0x59, + CHAN_START_0 = 0x5A, + CONT_1 = 0x5B, + CONT_0 = 0x5C, + TUNER_GO = 0x5D, + STATUS_EN_0 = 0x5F, + STATUS_EN_1 = 0x60, + INTERRUPT_EN_0 = 0x61, + INTERRUPT_EN_1 = 0x62, + INTERRUPT_EN_2 = 0x63, + INTERRUPT_EN_3 = 0x64, + AGC_TARGET = 0x67, + AGC_CTL = 0x68, + CAPT_RANGE = 0x75, + SNR_SELECT_1 = 0x79, + SNR_SELECT_0 = 0x7A, + RS_ERR_PER_1 = 0x7C, + RS_ERR_PER_0 = 0x7D, + CHIP_ID = 0x7F, + CHAN_STOP_1 = 0x80, + CHAN_STOP_0 = 0x81, + CHAN_STEP_1 = 0x82, + CHAN_STEP_0 = 0x83, + FEC_LOCK_TIME = 0x85, + OFDM_LOCK_TIME = 0x86, + ACQ_DELAY = 0x87, + SCAN_CTL = 0x88, + CLOCK_CTL = 0x89, + CONFIG = 0x8A, + MCLK_RATIO = 0x8B, + GPP_CTL = 0x8C, + ADC_CTL_1 = 0x8E, + ADC_CTL_0 = 0x8F +}; + +/* here we assume 1/6MHz == 166.66kHz stepsize */ +#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ + +#endif /* _MT352_PRIV_ */ diff --git a/drivers/media/dvb-frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c new file mode 100644 index 00000000..4bf05754 --- /dev/null +++ b/drivers/media/dvb-frontends/nxt200x.c @@ -0,0 +1,1251 @@ +/* + * Support for NXT2002 and NXT2004 - VSB/QAM + * + * Copyright (C) 2005 Kirk Lapray + * Copyright (C) 2006 Michael Krufky + * based on nxt2002 by Taylor Jacob + * and nxt2004 by Jean-Francois Thibert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +/* + * NOTES ABOUT THIS DRIVER + * + * This Linux driver supports: + * B2C2/BBTI Technisat Air2PC - ATSC (NXT2002) + * AverTVHD MCE A180 (NXT2004) + * ATI HDTV Wonder (NXT2004) + * + * This driver needs external firmware. Please use the command + * "/Documentation/dvb/get_dvb_firmware nxt2002" or + * "/Documentation/dvb/get_dvb_firmware nxt2004" to + * download/extract the appropriate firmware, and then copy it to + * /usr/lib/hotplug/firmware/ or /lib/firmware/ + * (depending on configuration of firmware hotplug). + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 256 + +#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw" +#define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw" +#define CRC_CCIT_MASK 0x1021 + +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "nxt200x.h" + +struct nxt200x_state { + + struct i2c_adapter* i2c; + const struct nxt200x_config* config; + struct dvb_frontend frontend; + + /* demodulator private data */ + nxt_chip_type demod_chip; + u8 initialised:1; +}; + +static int debug; +#define dprintk(args...) do { if (debug) pr_debug(args); } while (0) + +static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len) +{ + int err; + struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = len }; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n", + __func__, addr, err); + return -EREMOTEIO; + } + return 0; +} + +static int i2c_readbytes(struct nxt200x_state *state, u8 addr, u8 *buf, u8 len) +{ + int err; + struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n", + __func__, addr, err); + return -EREMOTEIO; + } + return 0; +} + +static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg, + const u8 *buf, u8 len) +{ + u8 buf2[MAX_XFER_SIZE]; + int err; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 }; + + if (1 + len > sizeof(buf2)) { + pr_warn("%s: i2c wr reg=%04x: len=%d is too big!\n", + __func__, reg, len); + return -EINVAL; + } + + buf2[0] = reg; + memcpy(&buf2[1], buf, len); + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n", + __func__, state->config->demod_address, err); + return -EREMOTEIO; + } + return 0; +} + +static int nxt200x_readbytes(struct nxt200x_state *state, u8 reg, u8 *buf, u8 len) +{ + u8 reg2 [] = { reg }; + + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } }; + + int err; + + if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { + pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n", + __func__, state->config->demod_address, err); + return -EREMOTEIO; + } + return 0; +} + +static u16 nxt200x_crc(u16 crc, u8 c) +{ + u8 i; + u16 input = (u16) c & 0xFF; + + input<<=8; + for(i=0; i<8; i++) { + if((crc^input) & 0x8000) + crc=(crc<<1)^CRC_CCIT_MASK; + else + crc<<=1; + input<<=1; + } + return crc; +} + +static int nxt200x_writereg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len) +{ + u8 attr, len2, buf; + dprintk("%s\n", __func__); + + /* set mutli register register */ + nxt200x_writebytes(state, 0x35, ®, 1); + + /* send the actual data */ + nxt200x_writebytes(state, 0x36, data, len); + + switch (state->demod_chip) { + case NXT2002: + len2 = len; + buf = 0x02; + break; + case NXT2004: + /* probably not right, but gives correct values */ + attr = 0x02; + if (reg & 0x80) { + attr = attr << 1; + if (reg & 0x04) + attr = attr >> 1; + } + /* set write bit */ + len2 = ((attr << 4) | 0x10) | len; + buf = 0x80; + break; + default: + return -EINVAL; + break; + } + + /* set multi register length */ + nxt200x_writebytes(state, 0x34, &len2, 1); + + /* toggle the multireg write bit */ + nxt200x_writebytes(state, 0x21, &buf, 1); + + nxt200x_readbytes(state, 0x21, &buf, 1); + + switch (state->demod_chip) { + case NXT2002: + if ((buf & 0x02) == 0) + return 0; + break; + case NXT2004: + if (buf == 0) + return 0; + break; + default: + return -EINVAL; + break; + } + + pr_warn("Error writing multireg register 0x%02X\n", reg); + + return 0; +} + +static int nxt200x_readreg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len) +{ + int i; + u8 buf, len2, attr; + dprintk("%s\n", __func__); + + /* set mutli register register */ + nxt200x_writebytes(state, 0x35, ®, 1); + + switch (state->demod_chip) { + case NXT2002: + /* set multi register length */ + len2 = len & 0x80; + nxt200x_writebytes(state, 0x34, &len2, 1); + + /* read the actual data */ + nxt200x_readbytes(state, reg, data, len); + return 0; + break; + case NXT2004: + /* probably not right, but gives correct values */ + attr = 0x02; + if (reg & 0x80) { + attr = attr << 1; + if (reg & 0x04) + attr = attr >> 1; + } + + /* set multi register length */ + len2 = (attr << 4) | len; + nxt200x_writebytes(state, 0x34, &len2, 1); + + /* toggle the multireg bit*/ + buf = 0x80; + nxt200x_writebytes(state, 0x21, &buf, 1); + + /* read the actual data */ + for(i = 0; i < len; i++) { + nxt200x_readbytes(state, 0x36 + i, &data[i], 1); + } + return 0; + break; + default: + return -EINVAL; + break; + } +} + +static void nxt200x_microcontroller_stop (struct nxt200x_state* state) +{ + u8 buf, stopval, counter = 0; + dprintk("%s\n", __func__); + + /* set correct stop value */ + switch (state->demod_chip) { + case NXT2002: + stopval = 0x40; + break; + case NXT2004: + stopval = 0x10; + break; + default: + stopval = 0; + break; + } + + buf = 0x80; + nxt200x_writebytes(state, 0x22, &buf, 1); + + while (counter < 20) { + nxt200x_readbytes(state, 0x31, &buf, 1); + if (buf & stopval) + return; + msleep(10); + counter++; + } + + pr_warn("Timeout waiting for nxt200x to stop. This is ok after " + "firmware upload.\n"); + return; +} + +static void nxt200x_microcontroller_start (struct nxt200x_state* state) +{ + u8 buf; + dprintk("%s\n", __func__); + + buf = 0x00; + nxt200x_writebytes(state, 0x22, &buf, 1); +} + +static void nxt2004_microcontroller_init (struct nxt200x_state* state) +{ + u8 buf[9]; + u8 counter = 0; + dprintk("%s\n", __func__); + + buf[0] = 0x00; + nxt200x_writebytes(state, 0x2b, buf, 1); + buf[0] = 0x70; + nxt200x_writebytes(state, 0x34, buf, 1); + buf[0] = 0x04; + nxt200x_writebytes(state, 0x35, buf, 1); + buf[0] = 0x01; buf[1] = 0x23; buf[2] = 0x45; buf[3] = 0x67; buf[4] = 0x89; + buf[5] = 0xAB; buf[6] = 0xCD; buf[7] = 0xEF; buf[8] = 0xC0; + nxt200x_writebytes(state, 0x36, buf, 9); + buf[0] = 0x80; + nxt200x_writebytes(state, 0x21, buf, 1); + + while (counter < 20) { + nxt200x_readbytes(state, 0x21, buf, 1); + if (buf[0] == 0) + return; + msleep(10); + counter++; + } + + pr_warn("Timeout waiting for nxt2004 to init.\n"); + + return; +} + +static int nxt200x_writetuner (struct nxt200x_state* state, u8* data) +{ + u8 buf, count = 0; + + dprintk("%s\n", __func__); + + dprintk("Tuner Bytes: %*ph\n", 4, data + 1); + + /* if NXT2004, write directly to tuner. if NXT2002, write through NXT chip. + * direct write is required for Philips TUV1236D and ALPS TDHU2 */ + switch (state->demod_chip) { + case NXT2004: + if (i2c_writebytes(state, data[0], data+1, 4)) + pr_warn("error writing to tuner\n"); + /* wait until we have a lock */ + while (count < 20) { + i2c_readbytes(state, data[0], &buf, 1); + if (buf & 0x40) + return 0; + msleep(100); + count++; + } + pr_warn("timeout waiting for tuner lock\n"); + break; + case NXT2002: + /* set the i2c transfer speed to the tuner */ + buf = 0x03; + nxt200x_writebytes(state, 0x20, &buf, 1); + + /* setup to transfer 4 bytes via i2c */ + buf = 0x04; + nxt200x_writebytes(state, 0x34, &buf, 1); + + /* write actual tuner bytes */ + nxt200x_writebytes(state, 0x36, data+1, 4); + + /* set tuner i2c address */ + buf = data[0] << 1; + nxt200x_writebytes(state, 0x35, &buf, 1); + + /* write UC Opmode to begin transfer */ + buf = 0x80; + nxt200x_writebytes(state, 0x21, &buf, 1); + + while (count < 20) { + nxt200x_readbytes(state, 0x21, &buf, 1); + if ((buf & 0x80)== 0x00) + return 0; + msleep(100); + count++; + } + pr_warn("timeout error writing to tuner\n"); + break; + default: + return -EINVAL; + break; + } + return 0; +} + +static void nxt200x_agc_reset(struct nxt200x_state* state) +{ + u8 buf; + dprintk("%s\n", __func__); + + switch (state->demod_chip) { + case NXT2002: + buf = 0x08; + nxt200x_writebytes(state, 0x08, &buf, 1); + buf = 0x00; + nxt200x_writebytes(state, 0x08, &buf, 1); + break; + case NXT2004: + nxt200x_readreg_multibyte(state, 0x08, &buf, 1); + buf = 0x08; + nxt200x_writereg_multibyte(state, 0x08, &buf, 1); + buf = 0x00; + nxt200x_writereg_multibyte(state, 0x08, &buf, 1); + break; + default: + break; + } + return; +} + +static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +{ + + struct nxt200x_state* state = fe->demodulator_priv; + u8 buf[3], written = 0, chunkpos = 0; + u16 rambase, position, crc = 0; + + dprintk("%s\n", __func__); + dprintk("Firmware is %zu bytes\n", fw->size); + + /* Get the RAM base for this nxt2002 */ + nxt200x_readbytes(state, 0x10, buf, 1); + + if (buf[0] & 0x10) + rambase = 0x1000; + else + rambase = 0x0000; + + dprintk("rambase on this nxt2002 is %04X\n", rambase); + + /* Hold the micro in reset while loading firmware */ + buf[0] = 0x80; + nxt200x_writebytes(state, 0x2B, buf, 1); + + for (position = 0; position < fw->size; position++) { + if (written == 0) { + crc = 0; + chunkpos = 0x28; + buf[0] = ((rambase + position) >> 8); + buf[1] = (rambase + position) & 0xFF; + buf[2] = 0x81; + /* write starting address */ + nxt200x_writebytes(state, 0x29, buf, 3); + } + written++; + chunkpos++; + + if ((written % 4) == 0) + nxt200x_writebytes(state, chunkpos, &fw->data[position-3], 4); + + crc = nxt200x_crc(crc, fw->data[position]); + + if ((written == 255) || (position+1 == fw->size)) { + /* write remaining bytes of firmware */ + nxt200x_writebytes(state, chunkpos+4-(written %4), + &fw->data[position-(written %4) + 1], + written %4); + buf[0] = crc << 8; + buf[1] = crc & 0xFF; + + /* write crc */ + nxt200x_writebytes(state, 0x2C, buf, 2); + + /* do a read to stop things */ + nxt200x_readbytes(state, 0x2A, buf, 1); + + /* set transfer mode to complete */ + buf[0] = 0x80; + nxt200x_writebytes(state, 0x2B, buf, 1); + + written = 0; + } + } + + return 0; +}; + +static int nxt2004_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +{ + + struct nxt200x_state* state = fe->demodulator_priv; + u8 buf[3]; + u16 rambase, position, crc=0; + + dprintk("%s\n", __func__); + dprintk("Firmware is %zu bytes\n", fw->size); + + /* set rambase */ + rambase = 0x1000; + + /* hold the micro in reset while loading firmware */ + buf[0] = 0x80; + nxt200x_writebytes(state, 0x2B, buf,1); + + /* calculate firmware CRC */ + for (position = 0; position < fw->size; position++) { + crc = nxt200x_crc(crc, fw->data[position]); + } + + buf[0] = rambase >> 8; + buf[1] = rambase & 0xFF; + buf[2] = 0x81; + /* write starting address */ + nxt200x_writebytes(state,0x29,buf,3); + + for (position = 0; position < fw->size;) { + nxt200x_writebytes(state, 0x2C, &fw->data[position], + fw->size-position > 255 ? 255 : fw->size-position); + position += (fw->size-position > 255 ? 255 : fw->size-position); + } + buf[0] = crc >> 8; + buf[1] = crc & 0xFF; + + dprintk("firmware crc is 0x%02X 0x%02X\n", buf[0], buf[1]); + + /* write crc */ + nxt200x_writebytes(state, 0x2C, buf,2); + + /* do a read to stop things */ + nxt200x_readbytes(state, 0x2C, buf, 1); + + /* set transfer mode to complete */ + buf[0] = 0x80; + nxt200x_writebytes(state, 0x2B, buf,1); + + return 0; +}; + +static int nxt200x_setup_frontend_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct nxt200x_state* state = fe->demodulator_priv; + u8 buf[5]; + + /* stop the micro first */ + nxt200x_microcontroller_stop(state); + + if (state->demod_chip == NXT2004) { + /* make sure demod is set to digital */ + buf[0] = 0x04; + nxt200x_writebytes(state, 0x14, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0x17, buf, 1); + } + + /* set additional params */ + switch (p->modulation) { + case QAM_64: + case QAM_256: + /* Set punctured clock for QAM */ + /* This is just a guess since I am unable to test it */ + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 1); + break; + case VSB_8: + /* Set non-punctured clock for VSB */ + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + break; + default: + return -EINVAL; + break; + } + + if (fe->ops.tuner_ops.calc_regs) { + /* get tuning information */ + fe->ops.tuner_ops.calc_regs(fe, buf, 5); + + /* write frequency information */ + nxt200x_writetuner(state, buf); + } + + /* reset the agc now that tuning has been completed */ + nxt200x_agc_reset(state); + + /* set target power level */ + switch (p->modulation) { + case QAM_64: + case QAM_256: + buf[0] = 0x74; + break; + case VSB_8: + buf[0] = 0x70; + break; + default: + return -EINVAL; + break; + } + nxt200x_writebytes(state, 0x42, buf, 1); + + /* configure sdm */ + switch (state->demod_chip) { + case NXT2002: + buf[0] = 0x87; + break; + case NXT2004: + buf[0] = 0x07; + break; + default: + return -EINVAL; + break; + } + nxt200x_writebytes(state, 0x57, buf, 1); + + /* write sdm1 input */ + buf[0] = 0x10; + buf[1] = 0x00; + switch (state->demod_chip) { + case NXT2002: + nxt200x_writereg_multibyte(state, 0x58, buf, 2); + break; + case NXT2004: + nxt200x_writebytes(state, 0x58, buf, 2); + break; + default: + return -EINVAL; + break; + } + + /* write sdmx input */ + switch (p->modulation) { + case QAM_64: + buf[0] = 0x68; + break; + case QAM_256: + buf[0] = 0x64; + break; + case VSB_8: + buf[0] = 0x60; + break; + default: + return -EINVAL; + break; + } + buf[1] = 0x00; + switch (state->demod_chip) { + case NXT2002: + nxt200x_writereg_multibyte(state, 0x5C, buf, 2); + break; + case NXT2004: + nxt200x_writebytes(state, 0x5C, buf, 2); + break; + default: + return -EINVAL; + break; + } + + /* write adc power lpf fc */ + buf[0] = 0x05; + nxt200x_writebytes(state, 0x43, buf, 1); + + if (state->demod_chip == NXT2004) { + /* write ??? */ + buf[0] = 0x00; + buf[1] = 0x00; + nxt200x_writebytes(state, 0x46, buf, 2); + } + + /* write accumulator2 input */ + buf[0] = 0x80; + buf[1] = 0x00; + switch (state->demod_chip) { + case NXT2002: + nxt200x_writereg_multibyte(state, 0x4B, buf, 2); + break; + case NXT2004: + nxt200x_writebytes(state, 0x4B, buf, 2); + break; + default: + return -EINVAL; + break; + } + + /* write kg1 */ + buf[0] = 0x00; + nxt200x_writebytes(state, 0x4D, buf, 1); + + /* write sdm12 lpf fc */ + buf[0] = 0x44; + nxt200x_writebytes(state, 0x55, buf, 1); + + /* write agc control reg */ + buf[0] = 0x04; + nxt200x_writebytes(state, 0x41, buf, 1); + + if (state->demod_chip == NXT2004) { + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x24; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* soft reset? */ + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x10; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x04; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x81, buf, 1); + buf[0] = 0x80; buf[1] = 0x00; buf[2] = 0x00; + nxt200x_writereg_multibyte(state, 0x82, buf, 3); + nxt200x_readreg_multibyte(state, 0x88, buf, 1); + buf[0] = 0x11; + nxt200x_writereg_multibyte(state, 0x88, buf, 1); + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x44; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + } + + /* write agc ucgp0 */ + switch (p->modulation) { + case QAM_64: + buf[0] = 0x02; + break; + case QAM_256: + buf[0] = 0x03; + break; + case VSB_8: + buf[0] = 0x00; + break; + default: + return -EINVAL; + break; + } + nxt200x_writebytes(state, 0x30, buf, 1); + + /* write agc control reg */ + buf[0] = 0x00; + nxt200x_writebytes(state, 0x41, buf, 1); + + /* write accumulator2 input */ + buf[0] = 0x80; + buf[1] = 0x00; + switch (state->demod_chip) { + case NXT2002: + nxt200x_writereg_multibyte(state, 0x49, buf, 2); + nxt200x_writereg_multibyte(state, 0x4B, buf, 2); + break; + case NXT2004: + nxt200x_writebytes(state, 0x49, buf, 2); + nxt200x_writebytes(state, 0x4B, buf, 2); + break; + default: + return -EINVAL; + break; + } + + /* write agc control reg */ + buf[0] = 0x04; + nxt200x_writebytes(state, 0x41, buf, 1); + + nxt200x_microcontroller_start(state); + + if (state->demod_chip == NXT2004) { + nxt2004_microcontroller_init(state); + + /* ???? */ + buf[0] = 0xF0; + buf[1] = 0x00; + nxt200x_writebytes(state, 0x5C, buf, 2); + } + + /* adjacent channel detection should be done here, but I don't + have any stations with this need so I cannot test it */ + + return 0; +} + +static int nxt200x_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 lock; + nxt200x_readbytes(state, 0x31, &lock, 1); + + *status = 0; + if (lock & 0x20) { + *status |= FE_HAS_SIGNAL; + *status |= FE_HAS_CARRIER; + *status |= FE_HAS_VITERBI; + *status |= FE_HAS_SYNC; + *status |= FE_HAS_LOCK; + } + return 0; +} + +static int nxt200x_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 b[3]; + + nxt200x_readreg_multibyte(state, 0xE6, b, 3); + + *ber = ((b[0] << 8) + b[1]) * 8; + + return 0; +} + +static int nxt200x_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 b[2]; + u16 temp = 0; + + /* setup to read cluster variance */ + b[0] = 0x00; + nxt200x_writebytes(state, 0xA1, b, 1); + + /* get multreg val */ + nxt200x_readreg_multibyte(state, 0xA6, b, 2); + + temp = (b[0] << 8) | b[1]; + *strength = ((0x7FFF - temp) & 0x0FFF) * 16; + + return 0; +} + +static int nxt200x_read_snr(struct dvb_frontend* fe, u16* snr) +{ + + struct nxt200x_state* state = fe->demodulator_priv; + u8 b[2]; + u16 temp = 0, temp2; + u32 snrdb = 0; + + /* setup to read cluster variance */ + b[0] = 0x00; + nxt200x_writebytes(state, 0xA1, b, 1); + + /* get multreg val from 0xA6 */ + nxt200x_readreg_multibyte(state, 0xA6, b, 2); + + temp = (b[0] << 8) | b[1]; + temp2 = 0x7FFF - temp; + + /* snr will be in db */ + if (temp2 > 0x7F00) + snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) ); + else if (temp2 > 0x7EC0) + snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) ); + else if (temp2 > 0x7C00) + snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) ); + else + snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) ); + + /* the value reported back from the frontend will be FFFF=32db 0000=0db */ + *snr = snrdb * (0xFFFF/32000); + + return 0; +} + +static int nxt200x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 b[3]; + + nxt200x_readreg_multibyte(state, 0xE6, b, 3); + *ucblocks = b[2]; + + return 0; +} + +static int nxt200x_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int nxt2002_init(struct dvb_frontend* fe) +{ + struct nxt200x_state* state = fe->demodulator_priv; + const struct firmware *fw; + int ret; + u8 buf[2]; + + /* request the firmware, this will block until someone uploads it */ + pr_debug("%s: Waiting for firmware upload (%s)...\n", + __func__, NXT2002_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE, + state->i2c->dev.parent); + pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); + if (ret) { + pr_err("%s: No firmware uploaded (timeout or file not found?)" + "\n", __func__); + return ret; + } + + ret = nxt2002_load_firmware(fe, fw); + release_firmware(fw); + if (ret) { + pr_err("%s: Writing firmware to device failed\n", __func__); + return ret; + } + pr_info("%s: Firmware upload complete\n", __func__); + + /* Put the micro into reset */ + nxt200x_microcontroller_stop(state); + + /* ensure transfer is complete */ + buf[0]=0x00; + nxt200x_writebytes(state, 0x2B, buf, 1); + + /* Put the micro into reset for real this time */ + nxt200x_microcontroller_stop(state); + + /* soft reset everything (agc,frontend,eq,fec)*/ + buf[0] = 0x0F; + nxt200x_writebytes(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0x08, buf, 1); + + /* write agc sdm configure */ + buf[0] = 0xF1; + nxt200x_writebytes(state, 0x57, buf, 1); + + /* write mod output format */ + buf[0] = 0x20; + nxt200x_writebytes(state, 0x09, buf, 1); + + /* write fec mpeg mode */ + buf[0] = 0x7E; + buf[1] = 0x00; + nxt200x_writebytes(state, 0xE9, buf, 2); + + /* write mux selection */ + buf[0] = 0x00; + nxt200x_writebytes(state, 0xCC, buf, 1); + + return 0; +} + +static int nxt2004_init(struct dvb_frontend* fe) +{ + struct nxt200x_state* state = fe->demodulator_priv; + const struct firmware *fw; + int ret; + u8 buf[3]; + + /* ??? */ + buf[0]=0x00; + nxt200x_writebytes(state, 0x1E, buf, 1); + + /* request the firmware, this will block until someone uploads it */ + pr_debug("%s: Waiting for firmware upload (%s)...\n", + __func__, NXT2004_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE, + state->i2c->dev.parent); + pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); + if (ret) { + pr_err("%s: No firmware uploaded (timeout or file not found?)" + "\n", __func__); + return ret; + } + + ret = nxt2004_load_firmware(fe, fw); + release_firmware(fw); + if (ret) { + pr_err("%s: Writing firmware to device failed\n", __func__); + return ret; + } + pr_info("%s: Firmware upload complete\n", __func__); + + /* ensure transfer is complete */ + buf[0] = 0x01; + nxt200x_writebytes(state, 0x19, buf, 1); + + nxt2004_microcontroller_init(state); + nxt200x_microcontroller_stop(state); + nxt200x_microcontroller_stop(state); + nxt2004_microcontroller_init(state); + nxt200x_microcontroller_stop(state); + + /* soft reset everything (agc,frontend,eq,fec)*/ + buf[0] = 0xFF; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + + /* write agc sdm configure */ + buf[0] = 0xD7; + nxt200x_writebytes(state, 0x57, buf, 1); + + /* ???*/ + buf[0] = 0x07; + buf[1] = 0xfe; + nxt200x_writebytes(state, 0x35, buf, 2); + buf[0] = 0x12; + nxt200x_writebytes(state, 0x34, buf, 1); + buf[0] = 0x80; + nxt200x_writebytes(state, 0x21, buf, 1); + + /* ???*/ + buf[0] = 0x21; + nxt200x_writebytes(state, 0x0A, buf, 1); + + /* ???*/ + buf[0] = 0x01; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* write fec mpeg mode */ + buf[0] = 0x7E; + buf[1] = 0x00; + nxt200x_writebytes(state, 0xE9, buf, 2); + + /* write mux selection */ + buf[0] = 0x00; + nxt200x_writebytes(state, 0xCC, buf, 1); + + /* ???*/ + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* soft reset? */ + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x10; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + + /* ???*/ + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x01; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x70; + nxt200x_writereg_multibyte(state, 0x81, buf, 1); + buf[0] = 0x31; buf[1] = 0x5E; buf[2] = 0x66; + nxt200x_writereg_multibyte(state, 0x82, buf, 3); + + nxt200x_readreg_multibyte(state, 0x88, buf, 1); + buf[0] = 0x11; + nxt200x_writereg_multibyte(state, 0x88, buf, 1); + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x40; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + nxt200x_readbytes(state, 0x10, buf, 1); + buf[0] = 0x10; + nxt200x_writebytes(state, 0x10, buf, 1); + nxt200x_readbytes(state, 0x0A, buf, 1); + buf[0] = 0x21; + nxt200x_writebytes(state, 0x0A, buf, 1); + + nxt2004_microcontroller_init(state); + + buf[0] = 0x21; + nxt200x_writebytes(state, 0x0A, buf, 1); + buf[0] = 0x7E; + nxt200x_writebytes(state, 0xE9, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0xEA, buf, 1); + + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* soft reset? */ + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x10; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x04; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x81, buf, 1); + buf[0] = 0x80; buf[1] = 0x00; buf[2] = 0x00; + nxt200x_writereg_multibyte(state, 0x82, buf, 3); + + nxt200x_readreg_multibyte(state, 0x88, buf, 1); + buf[0] = 0x11; + nxt200x_writereg_multibyte(state, 0x88, buf, 1); + + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x44; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* initialize tuner */ + nxt200x_readbytes(state, 0x10, buf, 1); + buf[0] = 0x12; + nxt200x_writebytes(state, 0x10, buf, 1); + buf[0] = 0x04; + nxt200x_writebytes(state, 0x13, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0x16, buf, 1); + buf[0] = 0x04; + nxt200x_writebytes(state, 0x14, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0x14, buf, 1); + nxt200x_writebytes(state, 0x17, buf, 1); + nxt200x_writebytes(state, 0x14, buf, 1); + nxt200x_writebytes(state, 0x17, buf, 1); + + return 0; +} + +static int nxt200x_init(struct dvb_frontend* fe) +{ + struct nxt200x_state* state = fe->demodulator_priv; + int ret = 0; + + if (!state->initialised) { + switch (state->demod_chip) { + case NXT2002: + ret = nxt2002_init(fe); + break; + case NXT2004: + ret = nxt2004_init(fe); + break; + default: + return -EINVAL; + break; + } + state->initialised = 1; + } + return ret; +} + +static int nxt200x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 500; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static void nxt200x_release(struct dvb_frontend* fe) +{ + struct nxt200x_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops nxt200x_ops; + +struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, + struct i2c_adapter* i2c) +{ + struct nxt200x_state* state = NULL; + u8 buf [] = {0,0,0,0,0}; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct nxt200x_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + + /* read card id */ + nxt200x_readbytes(state, 0x00, buf, 5); + dprintk("NXT info: %*ph\n", 5, buf); + + /* set demod chip */ + switch (buf[0]) { + case 0x04: + state->demod_chip = NXT2002; + pr_info("NXT2002 Detected\n"); + break; + case 0x05: + state->demod_chip = NXT2004; + pr_info("NXT2004 Detected\n"); + break; + default: + goto error; + } + + /* make sure demod chip is supported */ + switch (state->demod_chip) { + case NXT2002: + if (buf[0] != 0x04) goto error; /* device id */ + if (buf[1] != 0x02) goto error; /* fab id */ + if (buf[2] != 0x11) goto error; /* month */ + if (buf[3] != 0x20) goto error; /* year msb */ + if (buf[4] != 0x00) goto error; /* year lsb */ + break; + case NXT2004: + if (buf[0] != 0x05) goto error; /* device id */ + break; + default: + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &nxt200x_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + pr_err("Unknown/Unsupported NXT chip: %*ph\n", 5, buf); + return NULL; +} + +static struct dvb_frontend_ops nxt200x_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "Nextwave NXT200X VSB/QAM frontend", + .frequency_min = 54000000, + .frequency_max = 860000000, + .frequency_stepsize = 166666, /* stepsize is just a guess */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256 + }, + + .release = nxt200x_release, + + .init = nxt200x_init, + .sleep = nxt200x_sleep, + + .set_frontend = nxt200x_setup_frontend_parameters, + .get_tune_settings = nxt200x_get_tune_settings, + + .read_status = nxt200x_read_status, + .read_ber = nxt200x_read_ber, + .read_signal_strength = nxt200x_read_signal_strength, + .read_snr = nxt200x_read_snr, + .read_ucblocks = nxt200x_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); +MODULE_AUTHOR("Kirk Lapray, Michael Krufky, Jean-Francois Thibert, and Taylor Jacob"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(nxt200x_attach); + diff --git a/drivers/media/dvb-frontends/nxt200x.h b/drivers/media/dvb-frontends/nxt200x.h new file mode 100644 index 00000000..b518d545 --- /dev/null +++ b/drivers/media/dvb-frontends/nxt200x.h @@ -0,0 +1,63 @@ +/* + * Support for NXT2002 and NXT2004 - VSB/QAM + * + * Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com) + * based on nxt2002 by Taylor Jacob + * and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +#ifndef NXT200X_H +#define NXT200X_H + +#include +#include + +typedef enum nxt_chip_t { + NXTUNDEFINED, + NXT2002, + NXT2004 +}nxt_chip_type; + +struct nxt200x_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); +}; + +#if IS_ENABLED(CONFIG_DVB_NXT200X) +extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_NXT200X + +#endif /* NXT200X_H */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb-frontends/nxt6000.c b/drivers/media/dvb-frontends/nxt6000.c new file mode 100644 index 00000000..90ae6c72 --- /dev/null +++ b/drivers/media/dvb-frontends/nxt6000.c @@ -0,0 +1,616 @@ +/* + NxtWave Communications - NXT6000 demodulator driver + + Copyright (C) 2002-2003 Florian Schirmer + Copyright (C) 2003 Paul Andreassen + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "nxt6000_priv.h" +#include "nxt6000.h" + + + +struct nxt6000_state { + struct i2c_adapter* i2c; + /* configuration settings */ + const struct nxt6000_config* config; + struct dvb_frontend frontend; +}; + +static int debug; +#define dprintk if (debug) printk + +static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 2 }; + int ret; + + if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) + dprintk("nxt6000: nxt6000_write error (reg: 0x%02X, data: 0x%02X, ret: %d)\n", reg, data, ret); + + return (ret != 1) ? -EIO : 0; +} + +static u8 nxt6000_readreg(struct nxt6000_state* state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msgs[] = { + {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 1}, + {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1} + }; + + ret = i2c_transfer(state->i2c, msgs, 2); + + if (ret != 2) + dprintk("nxt6000: nxt6000_read error (reg: 0x%02X, ret: %d)\n", reg, ret); + + return b1[0]; +} + +static void nxt6000_reset(struct nxt6000_state* state) +{ + u8 val; + + val = nxt6000_readreg(state, OFDM_COR_CTL); + + nxt6000_writereg(state, OFDM_COR_CTL, val & ~COREACT); + nxt6000_writereg(state, OFDM_COR_CTL, val | COREACT); +} + +static int nxt6000_set_bandwidth(struct nxt6000_state *state, u32 bandwidth) +{ + u16 nominal_rate; + int result; + + switch (bandwidth) { + case 6000000: + nominal_rate = 0x55B7; + break; + + case 7000000: + nominal_rate = 0x6400; + break; + + case 8000000: + nominal_rate = 0x7249; + break; + + default: + return -EINVAL; + } + + if ((result = nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_1, nominal_rate & 0xFF)) < 0) + return result; + + return nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_2, (nominal_rate >> 8) & 0xFF); +} + +static int nxt6000_set_guard_interval(struct nxt6000_state* state, fe_guard_interval_t guard_interval) +{ + switch (guard_interval) { + + case GUARD_INTERVAL_1_32: + return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x00 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03)); + + case GUARD_INTERVAL_1_16: + return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x01 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03)); + + case GUARD_INTERVAL_AUTO: + case GUARD_INTERVAL_1_8: + return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x02 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03)); + + case GUARD_INTERVAL_1_4: + return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x03 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03)); + + default: + return -EINVAL; + } +} + +static int nxt6000_set_inversion(struct nxt6000_state* state, fe_spectral_inversion_t inversion) +{ + switch (inversion) { + + case INVERSION_OFF: + return nxt6000_writereg(state, OFDM_ITB_CTL, 0x00); + + case INVERSION_ON: + return nxt6000_writereg(state, OFDM_ITB_CTL, ITBINV); + + default: + return -EINVAL; + + } +} + +static int nxt6000_set_transmission_mode(struct nxt6000_state* state, fe_transmit_mode_t transmission_mode) +{ + int result; + + switch (transmission_mode) { + + case TRANSMISSION_MODE_2K: + if ((result = nxt6000_writereg(state, EN_DMD_RACQ, 0x00 | (nxt6000_readreg(state, EN_DMD_RACQ) & ~0x03))) < 0) + return result; + + return nxt6000_writereg(state, OFDM_COR_MODEGUARD, (0x00 << 2) | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x04)); + + case TRANSMISSION_MODE_8K: + case TRANSMISSION_MODE_AUTO: + if ((result = nxt6000_writereg(state, EN_DMD_RACQ, 0x02 | (nxt6000_readreg(state, EN_DMD_RACQ) & ~0x03))) < 0) + return result; + + return nxt6000_writereg(state, OFDM_COR_MODEGUARD, (0x01 << 2) | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x04)); + + default: + return -EINVAL; + + } +} + +static void nxt6000_setup(struct dvb_frontend* fe) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + nxt6000_writereg(state, RS_COR_SYNC_PARAM, SYNC_PARAM); + nxt6000_writereg(state, BER_CTRL, /*(1 << 2) | */ (0x01 << 1) | 0x01); + nxt6000_writereg(state, VIT_BERTIME_2, 0x00); // BER Timer = 0x000200 * 256 = 131072 bits + nxt6000_writereg(state, VIT_BERTIME_1, 0x02); // + nxt6000_writereg(state, VIT_BERTIME_0, 0x00); // + nxt6000_writereg(state, VIT_COR_INTEN, 0x98); // Enable BER interrupts + nxt6000_writereg(state, VIT_COR_CTL, 0x82); // Enable BER measurement + nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC | 0x02 ); + nxt6000_writereg(state, OFDM_COR_CTL, (0x01 << 5) | (nxt6000_readreg(state, OFDM_COR_CTL) & 0x0F)); + nxt6000_writereg(state, OFDM_COR_MODEGUARD, FORCEMODE8K | 0x02); + nxt6000_writereg(state, OFDM_AGC_CTL, AGCLAST | INITIAL_AGC_BW); + nxt6000_writereg(state, OFDM_ITB_FREQ_1, 0x06); + nxt6000_writereg(state, OFDM_ITB_FREQ_2, 0x31); + nxt6000_writereg(state, OFDM_CAS_CTL, (0x01 << 7) | (0x02 << 3) | 0x04); + nxt6000_writereg(state, CAS_FREQ, 0xBB); /* CHECKME */ + nxt6000_writereg(state, OFDM_SYR_CTL, 1 << 2); + nxt6000_writereg(state, OFDM_PPM_CTL_1, PPM256); + nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_1, 0x49); + nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_2, 0x72); + nxt6000_writereg(state, ANALOG_CONTROL_0, 1 << 5); + nxt6000_writereg(state, EN_DMD_RACQ, (1 << 7) | (3 << 4) | 2); + nxt6000_writereg(state, DIAG_CONFIG, TB_SET); + + if (state->config->clock_inversion) + nxt6000_writereg(state, SUB_DIAG_MODE_SEL, CLKINVERSION); + else + nxt6000_writereg(state, SUB_DIAG_MODE_SEL, 0); + + nxt6000_writereg(state, TS_FORMAT, 0); +} + +static void nxt6000_dump_status(struct nxt6000_state *state) +{ + u8 val; + +/* + printk("RS_COR_STAT: 0x%02X\n", nxt6000_readreg(fe, RS_COR_STAT)); + printk("VIT_SYNC_STATUS: 0x%02X\n", nxt6000_readreg(fe, VIT_SYNC_STATUS)); + printk("OFDM_COR_STAT: 0x%02X\n", nxt6000_readreg(fe, OFDM_COR_STAT)); + printk("OFDM_SYR_STAT: 0x%02X\n", nxt6000_readreg(fe, OFDM_SYR_STAT)); + printk("OFDM_TPS_RCVD_1: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_1)); + printk("OFDM_TPS_RCVD_2: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_2)); + printk("OFDM_TPS_RCVD_3: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_3)); + printk("OFDM_TPS_RCVD_4: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_4)); + printk("OFDM_TPS_RESERVED_1: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RESERVED_1)); + printk("OFDM_TPS_RESERVED_2: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RESERVED_2)); +*/ + printk("NXT6000 status:"); + + val = nxt6000_readreg(state, RS_COR_STAT); + + printk(" DATA DESCR LOCK: %d,", val & 0x01); + printk(" DATA SYNC LOCK: %d,", (val >> 1) & 0x01); + + val = nxt6000_readreg(state, VIT_SYNC_STATUS); + + printk(" VITERBI LOCK: %d,", (val >> 7) & 0x01); + + switch ((val >> 4) & 0x07) { + + case 0x00: + printk(" VITERBI CODERATE: 1/2,"); + break; + + case 0x01: + printk(" VITERBI CODERATE: 2/3,"); + break; + + case 0x02: + printk(" VITERBI CODERATE: 3/4,"); + break; + + case 0x03: + printk(" VITERBI CODERATE: 5/6,"); + break; + + case 0x04: + printk(" VITERBI CODERATE: 7/8,"); + break; + + default: + printk(" VITERBI CODERATE: Reserved,"); + + } + + val = nxt6000_readreg(state, OFDM_COR_STAT); + + printk(" CHCTrack: %d,", (val >> 7) & 0x01); + printk(" TPSLock: %d,", (val >> 6) & 0x01); + printk(" SYRLock: %d,", (val >> 5) & 0x01); + printk(" AGCLock: %d,", (val >> 4) & 0x01); + + switch (val & 0x0F) { + + case 0x00: + printk(" CoreState: IDLE,"); + break; + + case 0x02: + printk(" CoreState: WAIT_AGC,"); + break; + + case 0x03: + printk(" CoreState: WAIT_SYR,"); + break; + + case 0x04: + printk(" CoreState: WAIT_PPM,"); + break; + + case 0x01: + printk(" CoreState: WAIT_TRL,"); + break; + + case 0x05: + printk(" CoreState: WAIT_TPS,"); + break; + + case 0x06: + printk(" CoreState: MONITOR_TPS,"); + break; + + default: + printk(" CoreState: Reserved,"); + + } + + val = nxt6000_readreg(state, OFDM_SYR_STAT); + + printk(" SYRLock: %d,", (val >> 4) & 0x01); + printk(" SYRMode: %s,", (val >> 2) & 0x01 ? "8K" : "2K"); + + switch ((val >> 4) & 0x03) { + + case 0x00: + printk(" SYRGuard: 1/32,"); + break; + + case 0x01: + printk(" SYRGuard: 1/16,"); + break; + + case 0x02: + printk(" SYRGuard: 1/8,"); + break; + + case 0x03: + printk(" SYRGuard: 1/4,"); + break; + } + + val = nxt6000_readreg(state, OFDM_TPS_RCVD_3); + + switch ((val >> 4) & 0x07) { + + case 0x00: + printk(" TPSLP: 1/2,"); + break; + + case 0x01: + printk(" TPSLP: 2/3,"); + break; + + case 0x02: + printk(" TPSLP: 3/4,"); + break; + + case 0x03: + printk(" TPSLP: 5/6,"); + break; + + case 0x04: + printk(" TPSLP: 7/8,"); + break; + + default: + printk(" TPSLP: Reserved,"); + + } + + switch (val & 0x07) { + + case 0x00: + printk(" TPSHP: 1/2,"); + break; + + case 0x01: + printk(" TPSHP: 2/3,"); + break; + + case 0x02: + printk(" TPSHP: 3/4,"); + break; + + case 0x03: + printk(" TPSHP: 5/6,"); + break; + + case 0x04: + printk(" TPSHP: 7/8,"); + break; + + default: + printk(" TPSHP: Reserved,"); + + } + + val = nxt6000_readreg(state, OFDM_TPS_RCVD_4); + + printk(" TPSMode: %s,", val & 0x01 ? "8K" : "2K"); + + switch ((val >> 4) & 0x03) { + + case 0x00: + printk(" TPSGuard: 1/32,"); + break; + + case 0x01: + printk(" TPSGuard: 1/16,"); + break; + + case 0x02: + printk(" TPSGuard: 1/8,"); + break; + + case 0x03: + printk(" TPSGuard: 1/4,"); + break; + + } + + /* Strange magic required to gain access to RF_AGC_STATUS */ + nxt6000_readreg(state, RF_AGC_VAL_1); + val = nxt6000_readreg(state, RF_AGC_STATUS); + val = nxt6000_readreg(state, RF_AGC_STATUS); + + printk(" RF AGC LOCK: %d,", (val >> 4) & 0x01); + printk("\n"); +} + +static int nxt6000_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + u8 core_status; + struct nxt6000_state* state = fe->demodulator_priv; + + *status = 0; + + core_status = nxt6000_readreg(state, OFDM_COR_STAT); + + if (core_status & AGCLOCKED) + *status |= FE_HAS_SIGNAL; + + if (nxt6000_readreg(state, OFDM_SYR_STAT) & GI14_SYR_LOCK) + *status |= FE_HAS_CARRIER; + + if (nxt6000_readreg(state, VIT_SYNC_STATUS) & VITINSYNC) + *status |= FE_HAS_VITERBI; + + if (nxt6000_readreg(state, RS_COR_STAT) & RSCORESTATUS) + *status |= FE_HAS_SYNC; + + if ((core_status & TPSLOCKED) && (*status == (FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))) + *status |= FE_HAS_LOCK; + + if (debug) + nxt6000_dump_status(state); + + return 0; +} + +static int nxt6000_init(struct dvb_frontend* fe) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + nxt6000_reset(state); + nxt6000_setup(fe); + + return 0; +} + +static int nxt6000_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct nxt6000_state* state = fe->demodulator_priv; + int result; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + result = nxt6000_set_bandwidth(state, p->bandwidth_hz); + if (result < 0) + return result; + + result = nxt6000_set_guard_interval(state, p->guard_interval); + if (result < 0) + return result; + + result = nxt6000_set_transmission_mode(state, p->transmission_mode); + if (result < 0) + return result; + + result = nxt6000_set_inversion(state, p->inversion); + if (result < 0) + return result; + + msleep(500); + return 0; +} + +static void nxt6000_release(struct dvb_frontend* fe) +{ + struct nxt6000_state* state = fe->demodulator_priv; + kfree(state); +} + +static int nxt6000_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + *snr = nxt6000_readreg( state, OFDM_CHC_SNR) / 8; + + return 0; +} + +static int nxt6000_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18 ); + + *ber = (nxt6000_readreg( state, VIT_BER_1 ) << 8 ) | + nxt6000_readreg( state, VIT_BER_0 ); + + nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18); // Clear BER Done interrupts + + return 0; +} + +static int nxt6000_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + *signal_strength = (short) (511 - + (nxt6000_readreg(state, AGC_GAIN_1) + + ((nxt6000_readreg(state, AGC_GAIN_2) & 0x03) << 8))); + + return 0; +} + +static int nxt6000_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 500; + return 0; +} + +static int nxt6000_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + if (enable) { + return nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x01); + } else { + return nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x00); + } +} + +static struct dvb_frontend_ops nxt6000_ops; + +struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, + struct i2c_adapter* i2c) +{ + struct nxt6000_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct nxt6000_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* check if the demod is there */ + if (nxt6000_readreg(state, OFDM_MSC_REV) != NXT6000ASICDEVICE) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &nxt6000_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops nxt6000_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "NxtWave NXT6000 DVB-T", + .frequency_min = 0, + .frequency_max = 863250000, + .frequency_stepsize = 62500, + /*.frequency_tolerance = *//* FIXME: 12% of SR */ + .symbol_rate_min = 0, /* FIXME */ + .symbol_rate_max = 9360000, /* FIXME */ + .symbol_rate_tolerance = 4000, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = nxt6000_release, + + .init = nxt6000_init, + .i2c_gate_ctrl = nxt6000_i2c_gate_ctrl, + + .get_tune_settings = nxt6000_fe_get_tune_settings, + + .set_frontend = nxt6000_set_frontend, + + .read_status = nxt6000_read_status, + .read_ber = nxt6000_read_ber, + .read_signal_strength = nxt6000_read_signal_strength, + .read_snr = nxt6000_read_snr, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("NxtWave NXT6000 DVB-T demodulator driver"); +MODULE_AUTHOR("Florian Schirmer"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(nxt6000_attach); diff --git a/drivers/media/dvb-frontends/nxt6000.h b/drivers/media/dvb-frontends/nxt6000.h new file mode 100644 index 00000000..b5867c2a --- /dev/null +++ b/drivers/media/dvb-frontends/nxt6000.h @@ -0,0 +1,48 @@ +/* + NxtWave Communications - NXT6000 demodulator driver + + Copyright (C) 2002-2003 Florian Schirmer + Copyright (C) 2003 Paul Andreassen + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef NXT6000_H +#define NXT6000_H + +#include + +struct nxt6000_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* should clock inversion be used? */ + u8 clock_inversion:1; +}; + +#if IS_ENABLED(CONFIG_DVB_NXT6000) +extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_NXT6000 + +#endif // NXT6000_H diff --git a/drivers/media/dvb-frontends/nxt6000_priv.h b/drivers/media/dvb-frontends/nxt6000_priv.h new file mode 100644 index 00000000..0422e580 --- /dev/null +++ b/drivers/media/dvb-frontends/nxt6000_priv.h @@ -0,0 +1,286 @@ +/* + * Public Include File for DRV6000 users + * (ie. NxtWave Communications - NXT6000 demodulator driver) + * + * Copyright (C) 2001 NxtWave Communications, Inc. + * + */ + +/* Nxt6000 Register Addresses and Bit Masks */ + +/* Maximum Register Number */ +#define MAXNXT6000REG (0x9A) + +/* 0x1B A_VIT_BER_0 aka 0x3A */ +#define A_VIT_BER_0 (0x1B) + +/* 0x1D A_VIT_BER_TIMER_0 aka 0x38 */ +#define A_VIT_BER_TIMER_0 (0x1D) + +/* 0x21 RS_COR_STAT */ +#define RS_COR_STAT (0x21) +#define RSCORESTATUS (0x03) + +/* 0x22 RS_COR_INTEN */ +#define RS_COR_INTEN (0x22) + +/* 0x23 RS_COR_INSTAT */ +#define RS_COR_INSTAT (0x23) +#define INSTAT_ERROR (0x04) +#define LOCK_LOSS_BITS (0x03) + +/* 0x24 RS_COR_SYNC_PARAM */ +#define RS_COR_SYNC_PARAM (0x24) +#define SYNC_PARAM (0x03) + +/* 0x25 BER_CTRL */ +#define BER_CTRL (0x25) +#define BER_ENABLE (0x02) +#define BER_RESET (0x01) + +/* 0x26 BER_PAY */ +#define BER_PAY (0x26) + +/* 0x27 BER_PKT_L */ +#define BER_PKT_L (0x27) +#define BER_PKTOVERFLOW (0x80) + +/* 0x30 VIT_COR_CTL */ +#define VIT_COR_CTL (0x30) +#define BER_CONTROL (0x02) +#define VIT_COR_MASK (0x82) +#define VIT_COR_RESYNC (0x80) + + +/* 0x32 VIT_SYNC_STATUS */ +#define VIT_SYNC_STATUS (0x32) +#define VITINSYNC (0x80) + +/* 0x33 VIT_COR_INTEN */ +#define VIT_COR_INTEN (0x33) +#define GLOBAL_ENABLE (0x80) + +/* 0x34 VIT_COR_INTSTAT */ +#define VIT_COR_INTSTAT (0x34) +#define BER_DONE (0x08) +#define BER_OVERFLOW (0x10) + +/* 0x38 VIT_BERTIME_2 */ +#define VIT_BERTIME_2 (0x38) + +/* 0x39 VIT_BERTIME_1 */ +#define VIT_BERTIME_1 (0x39) + +/* 0x3A VIT_BERTIME_0 */ +#define VIT_BERTIME_0 (0x3a) + + /* 0x38 OFDM_BERTimer *//* Use the alias registers */ +#define A_VIT_BER_TIMER_0 (0x1D) + + /* 0x3A VIT_BER_TIMER_0 *//* Use the alias registers */ +#define A_VIT_BER_0 (0x1B) + +/* 0x3B VIT_BER_1 */ +#define VIT_BER_1 (0x3b) + +/* 0x3C VIT_BER_0 */ +#define VIT_BER_0 (0x3c) + +/* 0x40 OFDM_COR_CTL */ +#define OFDM_COR_CTL (0x40) +#define COREACT (0x20) +#define HOLDSM (0x10) +#define WAIT_AGC (0x02) +#define WAIT_SYR (0x03) + +/* 0x41 OFDM_COR_STAT */ +#define OFDM_COR_STAT (0x41) +#define COR_STATUS (0x0F) +#define MONITOR_TPS (0x06) +#define TPSLOCKED (0x40) +#define AGCLOCKED (0x10) + +/* 0x42 OFDM_COR_INTEN */ +#define OFDM_COR_INTEN (0x42) +#define TPSRCVBAD (0x04) +#define TPSRCVCHANGED (0x02) +#define TPSRCVUPDATE (0x01) + +/* 0x43 OFDM_COR_INSTAT */ +#define OFDM_COR_INSTAT (0x43) + +/* 0x44 OFDM_COR_MODEGUARD */ +#define OFDM_COR_MODEGUARD (0x44) +#define FORCEMODE (0x08) +#define FORCEMODE8K (0x04) + +/* 0x45 OFDM_AGC_CTL */ +#define OFDM_AGC_CTL (0x45) +#define INITIAL_AGC_BW (0x08) +#define AGCNEG (0x02) +#define AGCLAST (0x10) + +/* 0x48 OFDM_AGC_TARGET */ +#define OFDM_AGC_TARGET (0x48) +#define OFDM_AGC_TARGET_DEFAULT (0x28) +#define OFDM_AGC_TARGET_IMPULSE (0x38) + +/* 0x49 OFDM_AGC_GAIN_1 */ +#define OFDM_AGC_GAIN_1 (0x49) + +/* 0x4B OFDM_ITB_CTL */ +#define OFDM_ITB_CTL (0x4B) +#define ITBINV (0x01) + +/* 0x49 AGC_GAIN_1 */ +#define AGC_GAIN_1 (0x49) + +/* 0x4A AGC_GAIN_2 */ +#define AGC_GAIN_2 (0x4A) + +/* 0x4C OFDM_ITB_FREQ_1 */ +#define OFDM_ITB_FREQ_1 (0x4C) + +/* 0x4D OFDM_ITB_FREQ_2 */ +#define OFDM_ITB_FREQ_2 (0x4D) + +/* 0x4E OFDM_CAS_CTL */ +#define OFDM_CAS_CTL (0x4E) +#define ACSDIS (0x40) +#define CCSEN (0x80) + +/* 0x4F CAS_FREQ */ +#define CAS_FREQ (0x4F) + +/* 0x51 OFDM_SYR_CTL */ +#define OFDM_SYR_CTL (0x51) +#define SIXTH_ENABLE (0x80) +#define SYR_TRACKING_DISABLE (0x01) + +/* 0x52 OFDM_SYR_STAT */ +#define OFDM_SYR_STAT (0x52) +#define GI14_2K_SYR_LOCK (0x13) +#define GI14_8K_SYR_LOCK (0x17) +#define GI14_SYR_LOCK (0x10) + +/* 0x55 OFDM_SYR_OFFSET_1 */ +#define OFDM_SYR_OFFSET_1 (0x55) + +/* 0x56 OFDM_SYR_OFFSET_2 */ +#define OFDM_SYR_OFFSET_2 (0x56) + +/* 0x58 OFDM_SCR_CTL */ +#define OFDM_SCR_CTL (0x58) +#define SYR_ADJ_DECAY_MASK (0x70) +#define SYR_ADJ_DECAY (0x30) + +/* 0x59 OFDM_PPM_CTL_1 */ +#define OFDM_PPM_CTL_1 (0x59) +#define PPMMAX_MASK (0x30) +#define PPM256 (0x30) + +/* 0x5B OFDM_TRL_NOMINALRATE_1 */ +#define OFDM_TRL_NOMINALRATE_1 (0x5B) + +/* 0x5C OFDM_TRL_NOMINALRATE_2 */ +#define OFDM_TRL_NOMINALRATE_2 (0x5C) + +/* 0x5D OFDM_TRL_TIME_1 */ +#define OFDM_TRL_TIME_1 (0x5D) + +/* 0x60 OFDM_CRL_FREQ_1 */ +#define OFDM_CRL_FREQ_1 (0x60) + +/* 0x63 OFDM_CHC_CTL_1 */ +#define OFDM_CHC_CTL_1 (0x63) +#define MANMEAN1 (0xF0); +#define CHCFIR (0x01) + +/* 0x64 OFDM_CHC_SNR */ +#define OFDM_CHC_SNR (0x64) + +/* 0x65 OFDM_BDI_CTL */ +#define OFDM_BDI_CTL (0x65) +#define LP_SELECT (0x02) + +/* 0x67 OFDM_TPS_RCVD_1 */ +#define OFDM_TPS_RCVD_1 (0x67) +#define TPSFRAME (0x03) + +/* 0x68 OFDM_TPS_RCVD_2 */ +#define OFDM_TPS_RCVD_2 (0x68) + +/* 0x69 OFDM_TPS_RCVD_3 */ +#define OFDM_TPS_RCVD_3 (0x69) + +/* 0x6A OFDM_TPS_RCVD_4 */ +#define OFDM_TPS_RCVD_4 (0x6A) + +/* 0x6B OFDM_TPS_RESERVED_1 */ +#define OFDM_TPS_RESERVED_1 (0x6B) + +/* 0x6C OFDM_TPS_RESERVED_2 */ +#define OFDM_TPS_RESERVED_2 (0x6C) + +/* 0x73 OFDM_MSC_REV */ +#define OFDM_MSC_REV (0x73) + +/* 0x76 OFDM_SNR_CARRIER_2 */ +#define OFDM_SNR_CARRIER_2 (0x76) +#define MEAN_MASK (0x80) +#define MEANBIT (0x80) + +/* 0x80 ANALOG_CONTROL_0 */ +#define ANALOG_CONTROL_0 (0x80) +#define POWER_DOWN_ADC (0x40) + +/* 0x81 ENABLE_TUNER_IIC */ +#define ENABLE_TUNER_IIC (0x81) +#define ENABLE_TUNER_BIT (0x01) + +/* 0x82 EN_DMD_RACQ */ +#define EN_DMD_RACQ (0x82) +#define EN_DMD_RACQ_REG_VAL (0x81) +#define EN_DMD_RACQ_REG_VAL_14 (0x01) + +/* 0x84 SNR_COMMAND */ +#define SNR_COMMAND (0x84) +#define SNRStat (0x80) + +/* 0x85 SNRCARRIERNUMBER_LSB */ +#define SNRCARRIERNUMBER_LSB (0x85) + +/* 0x87 SNRMINTHRESHOLD_LSB */ +#define SNRMINTHRESHOLD_LSB (0x87) + +/* 0x89 SNR_PER_CARRIER_LSB */ +#define SNR_PER_CARRIER_LSB (0x89) + +/* 0x8B SNRBELOWTHRESHOLD_LSB */ +#define SNRBELOWTHRESHOLD_LSB (0x8B) + +/* 0x91 RF_AGC_VAL_1 */ +#define RF_AGC_VAL_1 (0x91) + +/* 0x92 RF_AGC_STATUS */ +#define RF_AGC_STATUS (0x92) + +/* 0x98 DIAG_CONFIG */ +#define DIAG_CONFIG (0x98) +#define DIAG_MASK (0x70) +#define TB_SET (0x10) +#define TRAN_SELECT (0x07) +#define SERIAL_SELECT (0x01) + +/* 0x99 SUB_DIAG_MODE_SEL */ +#define SUB_DIAG_MODE_SEL (0x99) +#define CLKINVERSION (0x01) + +/* 0x9A TS_FORMAT */ +#define TS_FORMAT (0x9A) +#define ERROR_SENSE (0x08) +#define VALID_SENSE (0x04) +#define SYNC_SENSE (0x02) +#define GATED_CLOCK (0x01) + +#define NXT6000ASICDEVICE (0x0b) diff --git a/drivers/media/dvb-frontends/or51132.c b/drivers/media/dvb-frontends/or51132.c new file mode 100644 index 00000000..5ef92182 --- /dev/null +++ b/drivers/media/dvb-frontends/or51132.c @@ -0,0 +1,631 @@ +/* + * Support for OR51132 (pcHDTV HD-3000) - VSB/QAM + * + * + * Copyright (C) 2007 Trent Piepho + * + * Copyright (C) 2005 Kirk Lapray + * + * Based on code from Jack Kelliher (kelliher@xmission.com) + * Copyright (C) 2002 & pcHDTV, inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +/* + * This driver needs two external firmware files. Please copy + * "dvb-fe-or51132-vsb.fw" and "dvb-fe-or51132-qam.fw" to + * /usr/lib/hotplug/firmware/ or /lib/firmware/ + * (depending on configuration of firmware hotplug). + */ +#define OR51132_VSB_FIRMWARE "dvb-fe-or51132-vsb.fw" +#define OR51132_QAM_FIRMWARE "dvb-fe-or51132-qam.fw" + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_math.h" +#include "dvb_frontend.h" +#include "or51132.h" + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "or51132: " args); \ + } while (0) + + +struct or51132_state +{ + struct i2c_adapter* i2c; + + /* Configuration settings */ + const struct or51132_config* config; + + struct dvb_frontend frontend; + + /* Demodulator private data */ + fe_modulation_t current_modulation; + u32 snr; /* Result of last SNR calculation */ + + /* Tuner private data */ + u32 current_frequency; +}; + + +/* Write buffer to demod */ +static int or51132_writebuf(struct or51132_state *state, const u8 *buf, int len) +{ + int err; + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = 0, .buf = (u8*)buf, .len = len }; + + /* msleep(20); */ /* doesn't appear to be necessary */ + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "or51132: I2C write (addr 0x%02x len %d) error: %d\n", + msg.addr, msg.len, err); + return -EREMOTEIO; + } + return 0; +} + +/* Write constant bytes, e.g. or51132_writebytes(state, 0x04, 0x42, 0x00); + Less code and more efficient that loading a buffer on the stack with + the bytes to send and then calling or51132_writebuf() on that. */ +#define or51132_writebytes(state, data...) \ + ({ static const u8 _data[] = {data}; \ + or51132_writebuf(state, _data, sizeof(_data)); }) + +/* Read data from demod into buffer. Returns 0 on success. */ +static int or51132_readbuf(struct or51132_state *state, u8 *buf, int len) +{ + int err; + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = I2C_M_RD, .buf = buf, .len = len }; + + /* msleep(20); */ /* doesn't appear to be necessary */ + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "or51132: I2C read (addr 0x%02x len %d) error: %d\n", + msg.addr, msg.len, err); + return -EREMOTEIO; + } + return 0; +} + +/* Reads a 16-bit demod register. Returns <0 on error. */ +static int or51132_readreg(struct or51132_state *state, u8 reg) +{ + u8 buf[2] = { 0x04, reg }; + struct i2c_msg msg[2] = { + {.addr = state->config->demod_address, .flags = 0, + .buf = buf, .len = 2 }, + {.addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = buf, .len = 2 }}; + int err; + + if ((err = i2c_transfer(state->i2c, msg, 2)) != 2) { + printk(KERN_WARNING "or51132: I2C error reading register %d: %d\n", + reg, err); + return -EREMOTEIO; + } + return buf[0] | (buf[1] << 8); +} + +static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +{ + struct or51132_state* state = fe->demodulator_priv; + static const u8 run_buf[] = {0x7F,0x01}; + u8 rec_buf[8]; + u32 firmwareAsize, firmwareBsize; + int i,ret; + + dprintk("Firmware is %Zd bytes\n",fw->size); + + /* Get size of firmware A and B */ + firmwareAsize = le32_to_cpu(*((__le32*)fw->data)); + dprintk("FirmwareA is %i bytes\n",firmwareAsize); + firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4))); + dprintk("FirmwareB is %i bytes\n",firmwareBsize); + + /* Upload firmware */ + if ((ret = or51132_writebuf(state, &fw->data[8], firmwareAsize))) { + printk(KERN_WARNING "or51132: load_firmware error 1\n"); + return ret; + } + if ((ret = or51132_writebuf(state, &fw->data[8+firmwareAsize], + firmwareBsize))) { + printk(KERN_WARNING "or51132: load_firmware error 2\n"); + return ret; + } + + if ((ret = or51132_writebuf(state, run_buf, 2))) { + printk(KERN_WARNING "or51132: load_firmware error 3\n"); + return ret; + } + if ((ret = or51132_writebuf(state, run_buf, 2))) { + printk(KERN_WARNING "or51132: load_firmware error 4\n"); + return ret; + } + + /* 50ms for operation to begin */ + msleep(50); + + /* Read back ucode version to besure we loaded correctly and are really up and running */ + /* Get uCode version */ + if ((ret = or51132_writebytes(state, 0x10, 0x10, 0x00))) { + printk(KERN_WARNING "or51132: load_firmware error a\n"); + return ret; + } + if ((ret = or51132_writebytes(state, 0x04, 0x17))) { + printk(KERN_WARNING "or51132: load_firmware error b\n"); + return ret; + } + if ((ret = or51132_writebytes(state, 0x00, 0x00))) { + printk(KERN_WARNING "or51132: load_firmware error c\n"); + return ret; + } + for (i=0;i<4;i++) { + /* Once upon a time, this command might have had something + to do with getting the firmware version, but it's + not used anymore: + {0x04,0x00,0x30,0x00,i+1} */ + /* Read 8 bytes, two bytes at a time */ + if ((ret = or51132_readbuf(state, &rec_buf[i*2], 2))) { + printk(KERN_WARNING + "or51132: load_firmware error d - %d\n",i); + return ret; + } + } + + printk(KERN_WARNING + "or51132: Version: %02X%02X%02X%02X-%02X%02X%02X%02X (%02X%01X-%01X-%02X%01X-%01X)\n", + rec_buf[1],rec_buf[0],rec_buf[3],rec_buf[2], + rec_buf[5],rec_buf[4],rec_buf[7],rec_buf[6], + rec_buf[3],rec_buf[2]>>4,rec_buf[2]&0x0f, + rec_buf[5],rec_buf[4]>>4,rec_buf[4]&0x0f); + + if ((ret = or51132_writebytes(state, 0x10, 0x00, 0x00))) { + printk(KERN_WARNING "or51132: load_firmware error e\n"); + return ret; + } + return 0; +}; + +static int or51132_init(struct dvb_frontend* fe) +{ + return 0; +} + +static int or51132_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = 0; + return 0; +} + +static int or51132_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int or51132_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int or51132_setmode(struct dvb_frontend* fe) +{ + struct or51132_state* state = fe->demodulator_priv; + u8 cmd_buf1[3] = {0x04, 0x01, 0x5f}; + u8 cmd_buf2[3] = {0x1c, 0x00, 0 }; + + dprintk("setmode %d\n",(int)state->current_modulation); + + switch (state->current_modulation) { + case VSB_8: + /* Auto CH, Auto NTSC rej, MPEGser, MPEG2tr, phase noise-high */ + cmd_buf1[2] = 0x50; + /* REC MODE inv IF spectrum, Normal */ + cmd_buf2[1] = 0x03; + /* Channel MODE ATSC/VSB8 */ + cmd_buf2[2] = 0x06; + break; + /* All QAM modes are: + Auto-deinterleave; MPEGser, MPEG2tr, phase noise-high + REC MODE Normal Carrier Lock */ + case QAM_AUTO: + /* Channel MODE Auto QAM64/256 */ + cmd_buf2[2] = 0x4f; + break; + case QAM_256: + /* Channel MODE QAM256 */ + cmd_buf2[2] = 0x45; + break; + case QAM_64: + /* Channel MODE QAM64 */ + cmd_buf2[2] = 0x43; + break; + default: + printk(KERN_WARNING + "or51132: setmode: Modulation set to unsupported value (%d)\n", + state->current_modulation); + return -EINVAL; + } + + /* Set Receiver 1 register */ + if (or51132_writebuf(state, cmd_buf1, 3)) { + printk(KERN_WARNING "or51132: set_mode error 1\n"); + return -EREMOTEIO; + } + dprintk("set #1 to %02x\n", cmd_buf1[2]); + + /* Set operation mode in Receiver 6 register */ + if (or51132_writebuf(state, cmd_buf2, 3)) { + printk(KERN_WARNING "or51132: set_mode error 2\n"); + return -EREMOTEIO; + } + dprintk("set #6 to 0x%02x%02x\n", cmd_buf2[1], cmd_buf2[2]); + + return 0; +} + +/* Some modulations use the same firmware. This classifies modulations + by the firmware they use. */ +#define MOD_FWCLASS_UNKNOWN 0 +#define MOD_FWCLASS_VSB 1 +#define MOD_FWCLASS_QAM 2 +static int modulation_fw_class(fe_modulation_t modulation) +{ + switch(modulation) { + case VSB_8: + return MOD_FWCLASS_VSB; + case QAM_AUTO: + case QAM_64: + case QAM_256: + return MOD_FWCLASS_QAM; + default: + return MOD_FWCLASS_UNKNOWN; + } +} + +static int or51132_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + int ret; + struct or51132_state* state = fe->demodulator_priv; + const struct firmware *fw; + const char *fwname; + int clock_mode; + + /* Upload new firmware only if we need a different one */ + if (modulation_fw_class(state->current_modulation) != + modulation_fw_class(p->modulation)) { + switch (modulation_fw_class(p->modulation)) { + case MOD_FWCLASS_VSB: + dprintk("set_parameters VSB MODE\n"); + fwname = OR51132_VSB_FIRMWARE; + + /* Set non-punctured clock for VSB */ + clock_mode = 0; + break; + case MOD_FWCLASS_QAM: + dprintk("set_parameters QAM MODE\n"); + fwname = OR51132_QAM_FIRMWARE; + + /* Set punctured clock for QAM */ + clock_mode = 1; + break; + default: + printk("or51132: Modulation type(%d) UNSUPPORTED\n", + p->modulation); + return -1; + } + printk("or51132: Waiting for firmware upload(%s)...\n", + fwname); + ret = request_firmware(&fw, fwname, state->i2c->dev.parent); + if (ret) { + printk(KERN_WARNING "or51132: No firmware up" + "loaded(timeout or file not found?)\n"); + return ret; + } + ret = or51132_load_firmware(fe, fw); + release_firmware(fw); + if (ret) { + printk(KERN_WARNING "or51132: Writing firmware to " + "device failed!\n"); + return ret; + } + printk("or51132: Firmware upload complete.\n"); + state->config->set_ts_params(fe, clock_mode); + } + /* Change only if we are actually changing the modulation */ + if (state->current_modulation != p->modulation) { + state->current_modulation = p->modulation; + or51132_setmode(fe); + } + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* Set to current mode */ + or51132_setmode(fe); + + /* Update current frequency */ + state->current_frequency = p->frequency; + return 0; +} + +static int or51132_get_parameters(struct dvb_frontend* fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct or51132_state* state = fe->demodulator_priv; + int status; + int retry = 1; + +start: + /* Receiver Status */ + if ((status = or51132_readreg(state, 0x00)) < 0) { + printk(KERN_WARNING "or51132: get_parameters: error reading receiver status\n"); + return -EREMOTEIO; + } + switch(status&0xff) { + case 0x06: + p->modulation = VSB_8; + break; + case 0x43: + p->modulation = QAM_64; + break; + case 0x45: + p->modulation = QAM_256; + break; + default: + if (retry--) + goto start; + printk(KERN_WARNING "or51132: unknown status 0x%02x\n", + status&0xff); + return -EREMOTEIO; + } + + /* FIXME: Read frequency from frontend, take AFC into account */ + p->frequency = state->current_frequency; + + /* FIXME: How to read inversion setting? Receiver 6 register? */ + p->inversion = INVERSION_AUTO; + + return 0; +} + +static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct or51132_state* state = fe->demodulator_priv; + int reg; + + /* Receiver Status */ + if ((reg = or51132_readreg(state, 0x00)) < 0) { + printk(KERN_WARNING "or51132: read_status: error reading receiver status: %d\n", reg); + *status = 0; + return -EREMOTEIO; + } + dprintk("%s: read_status %04x\n", __func__, reg); + + if (reg & 0x0100) /* Receiver Lock */ + *status = FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI| + FE_HAS_SYNC|FE_HAS_LOCK; + else + *status = 0; + return 0; +} + +/* Calculate SNR estimation (scaled by 2^24) + + 8-VSB SNR and QAM equations from Oren datasheets + + For 8-VSB: + SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) - K + + Where K = 0 if NTSC rejection filter is OFF; and + K = 3 if NTSC rejection filter is ON + + For QAM64: + SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) + + For QAM256: + SNR[dB] = 10 * log10(907832426.314266 / MSE^2 ) + + We re-write the snr equation as: + SNR * 2^24 = 10*(c - 2*intlog10(MSE)) + Where for QAM256, c = log10(907832426.314266) * 2^24 + and for 8-VSB and QAM64, c = log10(897152044.8282) * 2^24 */ + +static u32 calculate_snr(u32 mse, u32 c) +{ + if (mse == 0) /* No signal */ + return 0; + + mse = 2*intlog10(mse); + if (mse > c) { + /* Negative SNR, which is possible, but realisticly the + demod will lose lock before the signal gets this bad. The + API only allows for unsigned values, so just return 0 */ + return 0; + } + return 10*(c - mse); +} + +static int or51132_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct or51132_state* state = fe->demodulator_priv; + int noise, reg; + u32 c, usK = 0; + int retry = 1; + +start: + /* SNR after Equalizer */ + noise = or51132_readreg(state, 0x02); + if (noise < 0) { + printk(KERN_WARNING "or51132: read_snr: error reading equalizer\n"); + return -EREMOTEIO; + } + dprintk("read_snr noise (%d)\n", noise); + + /* Read status, contains modulation type for QAM_AUTO and + NTSC filter for VSB */ + reg = or51132_readreg(state, 0x00); + if (reg < 0) { + printk(KERN_WARNING "or51132: read_snr: error reading receiver status\n"); + return -EREMOTEIO; + } + + switch (reg&0xff) { + case 0x06: + if (reg & 0x1000) usK = 3 << 24; + /* Fall through to QAM64 case */ + case 0x43: + c = 150204167; + break; + case 0x45: + c = 150290396; + break; + default: + printk(KERN_WARNING "or51132: unknown status 0x%02x\n", reg&0xff); + if (retry--) goto start; + return -EREMOTEIO; + } + dprintk("%s: modulation %02x, NTSC rej O%s\n", __func__, + reg&0xff, reg&0x1000?"n":"ff"); + + /* Calculate SNR using noise, c, and NTSC rejection correction */ + state->snr = calculate_snr(noise, c) - usK; + *snr = (state->snr) >> 16; + + dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise, + state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); + + return 0; +} + +static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + /* Calculate Strength from SNR up to 35dB */ + /* Even though the SNR can go higher than 35dB, there is some comfort */ + /* factor in having a range of strong signals that can show at 100% */ + struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + u16 snr; + int ret; + + ret = fe->ops.read_snr(fe, &snr); + if (ret != 0) + return ret; + /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */ + /* scale the range 0 - 35*2^24 into 0 - 65535 */ + if (state->snr >= 8960 * 0x10000) + *strength = 0xffff; + else + *strength = state->snr / 8960; + + return 0; +} + +static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) +{ + fe_tune_settings->min_delay_ms = 500; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + + return 0; +} + +static void or51132_release(struct dvb_frontend* fe) +{ + struct or51132_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops or51132_ops; + +struct dvb_frontend* or51132_attach(const struct or51132_config* config, + struct i2c_adapter* i2c) +{ + struct or51132_state* state = NULL; + + /* Allocate memory for the internal state */ + state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL); + if (state == NULL) + return NULL; + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + state->current_frequency = -1; + state->current_modulation = -1; + + /* Create dvb_frontend */ + memcpy(&state->frontend.ops, &or51132_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +static struct dvb_frontend_ops or51132_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "Oren OR51132 VSB/QAM Frontend", + .frequency_min = 44000000, + .frequency_max = 958000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO | + FE_CAN_8VSB + }, + + .release = or51132_release, + + .init = or51132_init, + .sleep = or51132_sleep, + + .set_frontend = or51132_set_parameters, + .get_frontend = or51132_get_parameters, + .get_tune_settings = or51132_get_tune_settings, + + .read_status = or51132_read_status, + .read_ber = or51132_read_ber, + .read_signal_strength = or51132_read_signal_strength, + .read_snr = or51132_read_snr, + .read_ucblocks = or51132_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("OR51132 ATSC [pcHDTV HD-3000] (8VSB & ITU J83 AnnexB FEC QAM64/256) Demodulator Driver"); +MODULE_AUTHOR("Kirk Lapray"); +MODULE_AUTHOR("Trent Piepho"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(or51132_attach); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb-frontends/or51132.h b/drivers/media/dvb-frontends/or51132.h new file mode 100644 index 00000000..93895838 --- /dev/null +++ b/drivers/media/dvb-frontends/or51132.h @@ -0,0 +1,55 @@ +/* + * Support for OR51132 (pcHDTV HD-3000) - VSB/QAM + * + * Copyright (C) 2005 Kirk Lapray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +#ifndef OR51132_H +#define OR51132_H + +#include +#include + +struct or51132_config +{ + /* The demodulator's i2c address */ + u8 demod_address; + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); +}; + +#if IS_ENABLED(CONFIG_DVB_OR51132) +extern struct dvb_frontend* or51132_attach(const struct or51132_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* or51132_attach(const struct or51132_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_OR51132 + +#endif // OR51132_H + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c new file mode 100644 index 00000000..10cfc057 --- /dev/null +++ b/drivers/media/dvb-frontends/or51211.c @@ -0,0 +1,570 @@ +/* + * Support for OR51211 (pcHDTV HD-2000) - VSB + * + * Copyright (C) 2005 Kirk Lapray + * + * Based on code from Jack Kelliher (kelliher@xmission.com) + * Copyright (C) 2002 & pcHDTV, inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__ + +/* + * This driver needs external firmware. Please use the command + * "/Documentation/dvb/get_dvb_firmware or51211" to + * download/extract it, and then copy it to /usr/lib/hotplug/firmware + * or /lib/firmware (depending on configuration of firmware hotplug). + */ +#define OR51211_DEFAULT_FIRMWARE "dvb-fe-or51211.fw" + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_math.h" +#include "dvb_frontend.h" +#include "or51211.h" + +static int debug; +#define dprintk(args...) \ + do { if (debug) pr_debug(args); } while (0) + +static u8 run_buf[] = {0x7f,0x01}; +static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC + +struct or51211_state { + + struct i2c_adapter* i2c; + + /* Configuration settings */ + const struct or51211_config* config; + + struct dvb_frontend frontend; + struct bt878* bt; + + /* Demodulator private data */ + u8 initialized:1; + u32 snr; /* Result of last SNR claculation */ + + /* Tuner private data */ + u32 current_frequency; +}; + +static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf, + int len) +{ + int err; + struct i2c_msg msg; + msg.addr = reg; + msg.flags = 0; + msg.len = len; + msg.buf = (u8 *)buf; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + pr_warn("error (addr %02x, err == %i)\n", reg, err); + return -EREMOTEIO; + } + + return 0; +} + +static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len) +{ + int err; + struct i2c_msg msg; + msg.addr = reg; + msg.flags = I2C_M_RD; + msg.len = len; + msg.buf = buf; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + pr_warn("error (addr %02x, err == %i)\n", reg, err); + return -EREMOTEIO; + } + + return 0; +} + +static int or51211_load_firmware (struct dvb_frontend* fe, + const struct firmware *fw) +{ + struct or51211_state* state = fe->demodulator_priv; + u8 tudata[585]; + int i; + + dprintk("Firmware is %zd bytes\n",fw->size); + + /* Get eprom data */ + tudata[0] = 17; + if (i2c_writebytes(state,0x50,tudata,1)) { + pr_warn("error eprom addr\n"); + return -1; + } + if (i2c_readbytes(state,0x50,&tudata[145],192)) { + pr_warn("error eprom\n"); + return -1; + } + + /* Create firmware buffer */ + for (i = 0; i < 145; i++) + tudata[i] = fw->data[i]; + + for (i = 0; i < 248; i++) + tudata[i+337] = fw->data[145+i]; + + state->config->reset(fe); + + if (i2c_writebytes(state,state->config->demod_address,tudata,585)) { + pr_warn("error 1\n"); + return -1; + } + msleep(1); + + if (i2c_writebytes(state,state->config->demod_address, + &fw->data[393],8125)) { + pr_warn("error 2\n"); + return -1; + } + msleep(1); + + if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { + pr_warn("error 3\n"); + return -1; + } + + /* Wait at least 5 msec */ + msleep(10); + if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { + pr_warn("error 4\n"); + return -1; + } + msleep(10); + + pr_info("Done.\n"); + return 0; +}; + +static int or51211_setmode(struct dvb_frontend* fe, int mode) +{ + struct or51211_state* state = fe->demodulator_priv; + u8 rec_buf[14]; + + state->config->setmode(fe, mode); + + if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { + pr_warn("error 1\n"); + return -1; + } + + /* Wait at least 5 msec */ + msleep(10); + if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { + pr_warn("error 2\n"); + return -1; + } + + msleep(10); + + /* Set operation mode in Receiver 1 register; + * type 1: + * data 0x50h Automatic sets receiver channel conditions + * Automatic NTSC rejection filter + * Enable MPEG serial data output + * MPEG2tr + * High tuner phase noise + * normal +/-150kHz Carrier acquisition range + */ + if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) { + pr_warn("error 3\n"); + return -1; + } + + rec_buf[0] = 0x04; + rec_buf[1] = 0x00; + rec_buf[2] = 0x03; + rec_buf[3] = 0x00; + msleep(20); + if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) { + pr_warn("error 5\n"); + } + msleep(3); + if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) { + pr_warn("error 6\n"); + return -1; + } + dprintk("rec status %02x %02x\n", rec_buf[10], rec_buf[11]); + + return 0; +} + +static int or51211_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct or51211_state* state = fe->demodulator_priv; + + /* Change only if we are actually changing the channel */ + if (state->current_frequency != p->frequency) { + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* Set to ATSC mode */ + or51211_setmode(fe,0); + + /* Update current frequency */ + state->current_frequency = p->frequency; + } + return 0; +} + +static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct or51211_state* state = fe->demodulator_priv; + unsigned char rec_buf[2]; + unsigned char snd_buf[] = {0x04,0x00,0x03,0x00}; + *status = 0; + + /* Receiver Status */ + if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { + pr_warn("write error\n"); + return -1; + } + msleep(3); + if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { + pr_warn("read error\n"); + return -1; + } + dprintk("%x %x\n", rec_buf[0], rec_buf[1]); + + if (rec_buf[0] & 0x01) { /* Receiver Lock */ + *status |= FE_HAS_SIGNAL; + *status |= FE_HAS_CARRIER; + *status |= FE_HAS_VITERBI; + *status |= FE_HAS_SYNC; + *status |= FE_HAS_LOCK; + } + return 0; +} + +/* Calculate SNR estimation (scaled by 2^24) + + 8-VSB SNR equation from Oren datasheets + + For 8-VSB: + SNR[dB] = 10 * log10(219037.9454 / MSE^2 ) + + We re-write the snr equation as: + SNR * 2^24 = 10*(c - 2*intlog10(MSE)) + Where for 8-VSB, c = log10(219037.9454) * 2^24 */ + +static u32 calculate_snr(u32 mse, u32 c) +{ + if (mse == 0) /* No signal */ + return 0; + + mse = 2*intlog10(mse); + if (mse > c) { + /* Negative SNR, which is possible, but realisticly the + demod will lose lock before the signal gets this bad. The + API only allows for unsigned values, so just return 0 */ + return 0; + } + return 10*(c - mse); +} + +static int or51211_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct or51211_state* state = fe->demodulator_priv; + u8 rec_buf[2]; + u8 snd_buf[3]; + + /* SNR after Equalizer */ + snd_buf[0] = 0x04; + snd_buf[1] = 0x00; + snd_buf[2] = 0x04; + + if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { + pr_warn("error writing snr reg\n"); + return -1; + } + if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { + pr_warn("read_status read error\n"); + return -1; + } + + state->snr = calculate_snr(rec_buf[0], 89599047); + *snr = (state->snr) >> 16; + + dprintk("noise = 0x%02x, snr = %d.%02d dB\n", rec_buf[0], + state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); + + return 0; +} + +static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + /* Calculate Strength from SNR up to 35dB */ + /* Even though the SNR can go higher than 35dB, there is some comfort */ + /* factor in having a range of strong signals that can show at 100% */ + struct or51211_state* state = (struct or51211_state*)fe->demodulator_priv; + u16 snr; + int ret; + + ret = fe->ops.read_snr(fe, &snr); + if (ret != 0) + return ret; + /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */ + /* scale the range 0 - 35*2^24 into 0 - 65535 */ + if (state->snr >= 8960 * 0x10000) + *strength = 0xffff; + else + *strength = state->snr / 8960; + + return 0; +} + +static int or51211_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = -ENOSYS; + return 0; +} + +static int or51211_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + *ucblocks = -ENOSYS; + return 0; +} + +static int or51211_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int or51211_init(struct dvb_frontend* fe) +{ + struct or51211_state* state = fe->demodulator_priv; + const struct or51211_config* config = state->config; + const struct firmware* fw; + unsigned char get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00}; + unsigned char rec_buf[14]; + int ret,i; + + if (!state->initialized) { + /* Request the firmware, this will block until it uploads */ + pr_info("Waiting for firmware upload (%s)...\n", + OR51211_DEFAULT_FIRMWARE); + ret = config->request_firmware(fe, &fw, + OR51211_DEFAULT_FIRMWARE); + pr_info("Got Hotplug firmware\n"); + if (ret) { + pr_warn("No firmware uploaded " + "(timeout or file not found?)\n"); + return ret; + } + + ret = or51211_load_firmware(fe, fw); + release_firmware(fw); + if (ret) { + pr_warn("Writing firmware to device failed!\n"); + return ret; + } + pr_info("Firmware upload complete.\n"); + + /* Set operation mode in Receiver 1 register; + * type 1: + * data 0x50h Automatic sets receiver channel conditions + * Automatic NTSC rejection filter + * Enable MPEG serial data output + * MPEG2tr + * High tuner phase noise + * normal +/-150kHz Carrier acquisition range + */ + if (i2c_writebytes(state,state->config->demod_address, + cmd_buf,3)) { + pr_warn("Load DVR Error 5\n"); + return -1; + } + + /* Read back ucode version to besure we loaded correctly */ + /* and are really up and running */ + rec_buf[0] = 0x04; + rec_buf[1] = 0x00; + rec_buf[2] = 0x03; + rec_buf[3] = 0x00; + msleep(30); + if (i2c_writebytes(state,state->config->demod_address, + rec_buf,3)) { + pr_warn("Load DVR Error A\n"); + return -1; + } + msleep(3); + if (i2c_readbytes(state,state->config->demod_address, + &rec_buf[10],2)) { + pr_warn("Load DVR Error B\n"); + return -1; + } + + rec_buf[0] = 0x04; + rec_buf[1] = 0x00; + rec_buf[2] = 0x01; + rec_buf[3] = 0x00; + msleep(20); + if (i2c_writebytes(state,state->config->demod_address, + rec_buf,3)) { + pr_warn("Load DVR Error C\n"); + return -1; + } + msleep(3); + if (i2c_readbytes(state,state->config->demod_address, + &rec_buf[12],2)) { + pr_warn("Load DVR Error D\n"); + return -1; + } + + for (i = 0; i < 8; i++) + rec_buf[i]=0xed; + + for (i = 0; i < 5; i++) { + msleep(30); + get_ver_buf[4] = i+1; + if (i2c_writebytes(state,state->config->demod_address, + get_ver_buf,5)) { + pr_warn("Load DVR Error 6 - %d\n", i); + return -1; + } + msleep(3); + + if (i2c_readbytes(state,state->config->demod_address, + &rec_buf[i*2],2)) { + pr_warn("Load DVR Error 7 - %d\n", i); + return -1; + } + /* If we didn't receive the right index, try again */ + if ((int)rec_buf[i*2+1]!=i+1){ + i--; + } + } + dprintk("read_fwbits %10ph\n", rec_buf); + + pr_info("ver TU%02x%02x%02x VSB mode %02x Status %02x\n", + rec_buf[2], rec_buf[4], rec_buf[6], rec_buf[12], + rec_buf[10]); + + rec_buf[0] = 0x04; + rec_buf[1] = 0x00; + rec_buf[2] = 0x03; + rec_buf[3] = 0x00; + msleep(20); + if (i2c_writebytes(state,state->config->demod_address, + rec_buf,3)) { + pr_warn("Load DVR Error 8\n"); + return -1; + } + msleep(20); + if (i2c_readbytes(state,state->config->demod_address, + &rec_buf[8],2)) { + pr_warn("Load DVR Error 9\n"); + return -1; + } + state->initialized = 1; + } + + return 0; +} + +static int or51211_get_tune_settings(struct dvb_frontend* fe, + struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 500; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static void or51211_release(struct dvb_frontend* fe) +{ + struct or51211_state* state = fe->demodulator_priv; + state->config->sleep(fe); + kfree(state); +} + +static struct dvb_frontend_ops or51211_ops; + +struct dvb_frontend* or51211_attach(const struct or51211_config* config, + struct i2c_adapter* i2c) +{ + struct or51211_state* state = NULL; + + /* Allocate memory for the internal state */ + state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL); + if (state == NULL) + return NULL; + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + state->initialized = 0; + state->current_frequency = 0; + + /* Create dvb_frontend */ + memcpy(&state->frontend.ops, &or51211_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +static struct dvb_frontend_ops or51211_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "Oren OR51211 VSB Frontend", + .frequency_min = 44000000, + .frequency_max = 958000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_8VSB + }, + + .release = or51211_release, + + .init = or51211_init, + .sleep = or51211_sleep, + + .set_frontend = or51211_set_parameters, + .get_tune_settings = or51211_get_tune_settings, + + .read_status = or51211_read_status, + .read_ber = or51211_read_ber, + .read_signal_strength = or51211_read_signal_strength, + .read_snr = or51211_read_snr, + .read_ucblocks = or51211_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Oren OR51211 VSB [pcHDTV HD-2000] Demodulator Driver"); +MODULE_AUTHOR("Kirk Lapray"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(or51211_attach); + diff --git a/drivers/media/dvb-frontends/or51211.h b/drivers/media/dvb-frontends/or51211.h new file mode 100644 index 00000000..9a8ae936 --- /dev/null +++ b/drivers/media/dvb-frontends/or51211.h @@ -0,0 +1,53 @@ +/* + * Support for OR51211 (pcHDTV HD-2000) - VSB + * + * Copyright (C) 2005 Kirk Lapray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +#ifndef OR51211_H +#define OR51211_H + +#include +#include + +struct or51211_config +{ + /* The demodulator's i2c address */ + u8 demod_address; + + /* Request firmware for device */ + int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); + void (*setmode)(struct dvb_frontend * fe, int mode); + void (*reset)(struct dvb_frontend * fe); + void (*sleep)(struct dvb_frontend * fe); +}; + +#if IS_ENABLED(CONFIG_DVB_OR51211) +extern struct dvb_frontend* or51211_attach(const struct or51211_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* or51211_attach(const struct or51211_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_OR51211 + +#endif // OR51211_H + diff --git a/drivers/media/dvb-frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c new file mode 100644 index 00000000..7efb796c --- /dev/null +++ b/drivers/media/dvb-frontends/rtl2830.c @@ -0,0 +1,771 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +/* + * Driver implements own I2C-adapter for tuner I2C access. That's since chip + * have unusual I2C-gate control which closes gate automatically after each + * I2C transfer. Using own I2C adapter we can workaround that. + */ + +#include "rtl2830_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +/* write multiple hardware registers */ +static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, const u8 *val, int len) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 1 + len, + .buf = buf, + } + }; + + if (1 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + buf[0] = reg; + memcpy(&buf[1], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple hardware registers */ +static int rtl2830_rd(struct rtl2830_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + struct i2c_msg msg[2] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 1, + .buf = ®, + }, { + .addr = priv->cfg.i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = val, + } + }; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* write multiple registers */ +static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, const u8 *val, + int len) +{ + int ret; + u8 reg2 = (reg >> 0) & 0xff; + u8 page = (reg >> 8) & 0xff; + + /* switch bank if needed */ + if (page != priv->page) { + ret = rtl2830_wr(priv, 0x00, &page, 1); + if (ret) + return ret; + + priv->page = page; + } + + return rtl2830_wr(priv, reg2, val, len); +} + +/* read multiple registers */ +static int rtl2830_rd_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len) +{ + int ret; + u8 reg2 = (reg >> 0) & 0xff; + u8 page = (reg >> 8) & 0xff; + + /* switch bank if needed */ + if (page != priv->page) { + ret = rtl2830_wr(priv, 0x00, &page, 1); + if (ret) + return ret; + + priv->page = page; + } + + return rtl2830_rd(priv, reg2, val, len); +} + +/* read single register */ +static int rtl2830_rd_reg(struct rtl2830_priv *priv, u16 reg, u8 *val) +{ + return rtl2830_rd_regs(priv, reg, val, 1); +} + +/* write single register with mask */ +static int rtl2830_wr_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 val, u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = rtl2830_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return rtl2830_wr_regs(priv, reg, &val, 1); +} + +/* read single register with mask */ +static int rtl2830_rd_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 *val, u8 mask) +{ + int ret, i; + u8 tmp; + + ret = rtl2830_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + tmp &= mask; + + /* find position of the first bit */ + for (i = 0; i < 8; i++) { + if ((mask >> i) & 0x01) + break; + } + *val = tmp >> i; + + return 0; +} + +static int rtl2830_init(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret, i; + struct rtl2830_reg_val_mask tab[] = { + { 0x00d, 0x01, 0x03 }, + { 0x00d, 0x10, 0x10 }, + { 0x104, 0x00, 0x1e }, + { 0x105, 0x80, 0x80 }, + { 0x110, 0x02, 0x03 }, + { 0x110, 0x08, 0x0c }, + { 0x17b, 0x00, 0x40 }, + { 0x17d, 0x05, 0x0f }, + { 0x17d, 0x50, 0xf0 }, + { 0x18c, 0x08, 0x0f }, + { 0x18d, 0x00, 0xc0 }, + { 0x188, 0x05, 0x0f }, + { 0x189, 0x00, 0xfc }, + { 0x2d5, 0x02, 0x02 }, + { 0x2f1, 0x02, 0x06 }, + { 0x2f1, 0x20, 0xf8 }, + { 0x16d, 0x00, 0x01 }, + { 0x1a6, 0x00, 0x80 }, + { 0x106, priv->cfg.vtop, 0x3f }, + { 0x107, priv->cfg.krf, 0x3f }, + { 0x112, 0x28, 0xff }, + { 0x103, priv->cfg.agc_targ_val, 0xff }, + { 0x00a, 0x02, 0x07 }, + { 0x140, 0x0c, 0x3c }, + { 0x140, 0x40, 0xc0 }, + { 0x15b, 0x05, 0x07 }, + { 0x15b, 0x28, 0x38 }, + { 0x15c, 0x05, 0x07 }, + { 0x15c, 0x28, 0x38 }, + { 0x115, priv->cfg.spec_inv, 0x01 }, + { 0x16f, 0x01, 0x07 }, + { 0x170, 0x18, 0x38 }, + { 0x172, 0x0f, 0x0f }, + { 0x173, 0x08, 0x38 }, + { 0x175, 0x01, 0x07 }, + { 0x176, 0x00, 0xc0 }, + }; + + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = rtl2830_wr_reg_mask(priv, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret) + goto err; + } + + ret = rtl2830_wr_regs(priv, 0x18f, "\x28\x00", 2); + if (ret) + goto err; + + ret = rtl2830_wr_regs(priv, 0x195, + "\x04\x06\x0a\x12\x0a\x12\x1e\x28", 8); + if (ret) + goto err; + + /* TODO: spec init */ + + /* soft reset */ + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x04, 0x04); + if (ret) + goto err; + + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x00, 0x04); + if (ret) + goto err; + + priv->sleeping = false; + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2830_sleep(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + priv->sleeping = true; + return 0; +} + +static int rtl2830_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 500; + s->step_size = fe->ops.info.frequency_stepsize * 2; + s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; + + return 0; +} + +static int rtl2830_set_frontend(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i; + u64 num; + u8 buf[3], tmp; + u32 if_ctl, if_frequency; + static const u8 bw_params1[3][34] = { + { + 0x1f, 0xf0, 0x1f, 0xf0, 0x1f, 0xfa, 0x00, 0x17, 0x00, 0x41, + 0x00, 0x64, 0x00, 0x67, 0x00, 0x38, 0x1f, 0xde, 0x1f, 0x7a, + 0x1f, 0x47, 0x1f, 0x7c, 0x00, 0x30, 0x01, 0x4b, 0x02, 0x82, + 0x03, 0x73, 0x03, 0xcf, /* 6 MHz */ + }, { + 0x1f, 0xfa, 0x1f, 0xda, 0x1f, 0xc1, 0x1f, 0xb3, 0x1f, 0xca, + 0x00, 0x07, 0x00, 0x4d, 0x00, 0x6d, 0x00, 0x40, 0x1f, 0xca, + 0x1f, 0x4d, 0x1f, 0x2a, 0x1f, 0xb2, 0x00, 0xec, 0x02, 0x7e, + 0x03, 0xd0, 0x04, 0x53, /* 7 MHz */ + }, { + 0x00, 0x10, 0x00, 0x0e, 0x1f, 0xf7, 0x1f, 0xc9, 0x1f, 0xa0, + 0x1f, 0xa6, 0x1f, 0xec, 0x00, 0x4e, 0x00, 0x7d, 0x00, 0x3a, + 0x1f, 0x98, 0x1f, 0x10, 0x1f, 0x40, 0x00, 0x75, 0x02, 0x5f, + 0x04, 0x24, 0x04, 0xdb, /* 8 MHz */ + }, + }; + static const u8 bw_params2[3][6] = { + {0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30}, /* 6 MHz */ + {0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98}, /* 7 MHz */ + {0xae, 0xba, 0xf3, 0x26, 0x66, 0x64}, /* 8 MHz */ + }; + + dev_dbg(&priv->i2c->dev, + "%s: frequency=%d bandwidth_hz=%d inversion=%d\n", + __func__, c->frequency, c->bandwidth_hz, c->inversion); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + switch (c->bandwidth_hz) { + case 6000000: + i = 0; + break; + case 7000000: + i = 1; + break; + case 8000000: + i = 2; + break; + default: + dev_dbg(&priv->i2c->dev, "%s: invalid bandwidth\n", __func__); + return -EINVAL; + } + + ret = rtl2830_wr_reg_mask(priv, 0x008, i << 1, 0x06); + if (ret) + goto err; + + /* program if frequency */ + if (fe->ops.tuner_ops.get_if_frequency) + ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); + else + ret = -EINVAL; + + if (ret < 0) + goto err; + + num = if_frequency % priv->cfg.xtal; + num *= 0x400000; + num = div_u64(num, priv->cfg.xtal); + num = -num; + if_ctl = num & 0x3fffff; + dev_dbg(&priv->i2c->dev, "%s: if_frequency=%d if_ctl=%08x\n", + __func__, if_frequency, if_ctl); + + ret = rtl2830_rd_reg_mask(priv, 0x119, &tmp, 0xc0); /* b[7:6] */ + if (ret) + goto err; + + buf[0] = tmp << 6; + buf[0] |= (if_ctl >> 16) & 0x3f; + buf[1] = (if_ctl >> 8) & 0xff; + buf[2] = (if_ctl >> 0) & 0xff; + + ret = rtl2830_wr_regs(priv, 0x119, buf, 3); + if (ret) + goto err; + + /* 1/2 split I2C write */ + ret = rtl2830_wr_regs(priv, 0x11c, &bw_params1[i][0], 17); + if (ret) + goto err; + + /* 2/2 split I2C write */ + ret = rtl2830_wr_regs(priv, 0x12d, &bw_params1[i][17], 17); + if (ret) + goto err; + + ret = rtl2830_wr_regs(priv, 0x19d, bw_params2[i], 6); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2830_get_frontend(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + u8 buf[3]; + + if (priv->sleeping) + return 0; + + ret = rtl2830_rd_regs(priv, 0x33c, buf, 2); + if (ret) + goto err; + + ret = rtl2830_rd_reg(priv, 0x351, &buf[2]); + if (ret) + goto err; + + dev_dbg(&priv->i2c->dev, "%s: TPS=%*ph\n", __func__, 3, buf); + + switch ((buf[0] >> 2) & 3) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + } + + switch ((buf[2] >> 2) & 1) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_8K; + } + + switch ((buf[2] >> 0) & 3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[0] >> 4) & 7) { + case 0: + c->hierarchy = HIERARCHY_NONE; + break; + case 1: + c->hierarchy = HIERARCHY_1; + break; + case 2: + c->hierarchy = HIERARCHY_2; + break; + case 3: + c->hierarchy = HIERARCHY_4; + break; + } + + switch ((buf[1] >> 3) & 7) { + case 0: + c->code_rate_HP = FEC_1_2; + break; + case 1: + c->code_rate_HP = FEC_2_3; + break; + case 2: + c->code_rate_HP = FEC_3_4; + break; + case 3: + c->code_rate_HP = FEC_5_6; + break; + case 4: + c->code_rate_HP = FEC_7_8; + break; + } + + switch ((buf[1] >> 0) & 7) { + case 0: + c->code_rate_LP = FEC_1_2; + break; + case 1: + c->code_rate_LP = FEC_2_3; + break; + case 2: + c->code_rate_LP = FEC_3_4; + break; + case 3: + c->code_rate_LP = FEC_5_6; + break; + case 4: + c->code_rate_LP = FEC_7_8; + break; + } + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2830_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret; + u8 tmp; + *status = 0; + + if (priv->sleeping) + return 0; + + ret = rtl2830_rd_reg_mask(priv, 0x351, &tmp, 0x78); /* [6:3] */ + if (ret) + goto err; + + if (tmp == 11) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } else if (tmp == 10) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI; + } + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2830_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret, hierarchy, constellation; + u8 buf[2], tmp; + u16 tmp16; +#define CONSTELLATION_NUM 3 +#define HIERARCHY_NUM 4 + static const u32 snr_constant[CONSTELLATION_NUM][HIERARCHY_NUM] = { + { 70705899, 70705899, 70705899, 70705899 }, + { 82433173, 82433173, 87483115, 94445660 }, + { 92888734, 92888734, 95487525, 99770748 }, + }; + + if (priv->sleeping) + return 0; + + /* reports SNR in resolution of 0.1 dB */ + + ret = rtl2830_rd_reg(priv, 0x33c, &tmp); + if (ret) + goto err; + + constellation = (tmp >> 2) & 0x03; /* [3:2] */ + if (constellation > CONSTELLATION_NUM - 1) + goto err; + + hierarchy = (tmp >> 4) & 0x07; /* [6:4] */ + if (hierarchy > HIERARCHY_NUM - 1) + goto err; + + ret = rtl2830_rd_regs(priv, 0x40c, buf, 2); + if (ret) + goto err; + + tmp16 = buf[0] << 8 | buf[1]; + + if (tmp16) + *snr = (snr_constant[constellation][hierarchy] - + intlog10(tmp16)) / ((1 << 24) / 100); + else + *snr = 0; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2830_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + + if (priv->sleeping) + return 0; + + ret = rtl2830_rd_regs(priv, 0x34e, buf, 2); + if (ret) + goto err; + + *ber = buf[0] << 8 | buf[1]; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int rtl2830_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + u16 if_agc_raw, if_agc; + + if (priv->sleeping) + return 0; + + ret = rtl2830_rd_regs(priv, 0x359, buf, 2); + if (ret) + goto err; + + if_agc_raw = (buf[0] << 8 | buf[1]) & 0x3fff; + + if (if_agc_raw & (1 << 9)) + if_agc = -(~(if_agc_raw - 1) & 0x1ff); + else + if_agc = if_agc_raw; + + *strength = (u8) (55 - if_agc / 182); + *strength |= *strength << 8; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct dvb_frontend_ops rtl2830_ops; + +static u32 rtl2830_tuner_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int rtl2830_tuner_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct rtl2830_priv *priv = i2c_get_adapdata(i2c_adap); + int ret; + + /* open i2c-gate */ + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x08, 0x08); + if (ret) + goto err; + + ret = i2c_transfer(priv->i2c, msg, num); + if (ret < 0) + dev_warn(&priv->i2c->dev, "%s: tuner i2c failed=%d\n", + KBUILD_MODNAME, ret); + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct i2c_algorithm rtl2830_tuner_i2c_algo = { + .master_xfer = rtl2830_tuner_i2c_xfer, + .functionality = rtl2830_tuner_i2c_func, +}; + +struct i2c_adapter *rtl2830_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + return &priv->tuner_i2c_adapter; +} +EXPORT_SYMBOL(rtl2830_get_tuner_i2c_adapter); + +static void rtl2830_release(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + + i2c_del_adapter(&priv->tuner_i2c_adapter); + kfree(priv); +} + +struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg, + struct i2c_adapter *i2c) +{ + struct rtl2830_priv *priv = NULL; + int ret = 0; + u8 tmp; + + /* allocate memory for the internal state */ + priv = kzalloc(sizeof(struct rtl2830_priv), GFP_KERNEL); + if (priv == NULL) + goto err; + + /* setup the priv */ + priv->i2c = i2c; + memcpy(&priv->cfg, cfg, sizeof(struct rtl2830_config)); + + /* check if the demod is there */ + ret = rtl2830_rd_reg(priv, 0x000, &tmp); + if (ret) + goto err; + + /* create dvb_frontend */ + memcpy(&priv->fe.ops, &rtl2830_ops, sizeof(struct dvb_frontend_ops)); + priv->fe.demodulator_priv = priv; + + /* create tuner i2c adapter */ + strlcpy(priv->tuner_i2c_adapter.name, "RTL2830 tuner I2C adapter", + sizeof(priv->tuner_i2c_adapter.name)); + priv->tuner_i2c_adapter.algo = &rtl2830_tuner_i2c_algo; + priv->tuner_i2c_adapter.algo_data = NULL; + i2c_set_adapdata(&priv->tuner_i2c_adapter, priv); + if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) { + dev_err(&i2c->dev, + "%s: tuner i2c bus could not be initialized\n", + KBUILD_MODNAME); + goto err; + } + + priv->sleeping = true; + + return &priv->fe; +err: + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(rtl2830_attach); + +static struct dvb_frontend_ops rtl2830_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Realtek RTL2830 (DVB-T)", + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = rtl2830_release, + + .init = rtl2830_init, + .sleep = rtl2830_sleep, + + .get_tune_settings = rtl2830_get_tune_settings, + + .set_frontend = rtl2830_set_frontend, + .get_frontend = rtl2830_get_frontend, + + .read_status = rtl2830_read_status, + .read_snr = rtl2830_read_snr, + .read_ber = rtl2830_read_ber, + .read_ucblocks = rtl2830_read_ucblocks, + .read_signal_strength = rtl2830_read_signal_strength, +}; + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Realtek RTL2830 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/rtl2830.h b/drivers/media/dvb-frontends/rtl2830.h new file mode 100644 index 00000000..3313847f --- /dev/null +++ b/drivers/media/dvb-frontends/rtl2830.h @@ -0,0 +1,90 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL2830_H +#define RTL2830_H + +#include +#include + +struct rtl2830_config { + /* + * Demodulator I2C address. + */ + u8 i2c_addr; + + /* + * Xtal frequency. + * Hz + * 4000000, 16000000, 25000000, 28800000 + */ + u32 xtal; + + /* + * TS output mode. + */ + u8 ts_mode; + + /* + * Spectrum inversion. + */ + bool spec_inv; + + /* + */ + u8 vtop; + + /* + */ + u8 krf; + + /* + */ + u8 agc_targ_val; +}; + +#if IS_ENABLED(CONFIG_DVB_RTL2830) +extern struct dvb_frontend *rtl2830_attach( + const struct rtl2830_config *config, + struct i2c_adapter *i2c +); + +extern struct i2c_adapter *rtl2830_get_tuner_i2c_adapter( + struct dvb_frontend *fe +); +#else +static inline struct dvb_frontend *rtl2830_attach( + const struct rtl2830_config *config, + struct i2c_adapter *i2c +) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *rtl2830_get_tuner_i2c_adapter( + struct dvb_frontend *fe +) +{ + return NULL; +} +#endif + +#endif /* RTL2830_H */ diff --git a/drivers/media/dvb-frontends/rtl2830_priv.h b/drivers/media/dvb-frontends/rtl2830_priv.h new file mode 100644 index 00000000..fab10ecb --- /dev/null +++ b/drivers/media/dvb-frontends/rtl2830_priv.h @@ -0,0 +1,45 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL2830_PRIV_H +#define RTL2830_PRIV_H + +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "rtl2830.h" + +struct rtl2830_priv { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct rtl2830_config cfg; + struct i2c_adapter tuner_i2c_adapter; + + bool sleeping; + + u8 page; /* active register page */ +}; + +struct rtl2830_reg_val_mask { + u16 reg; + u8 val; + u8 mask; +}; + +#endif /* RTL2830_PRIV_H */ diff --git a/drivers/media/dvb-frontends/rtl2832.c b/drivers/media/dvb-frontends/rtl2832.c new file mode 100644 index 00000000..b8dd0a13 --- /dev/null +++ b/drivers/media/dvb-frontends/rtl2832.c @@ -0,0 +1,987 @@ +/* + * Realtek RTL2832 DVB-T demodulator driver + * + * Copyright (C) 2012 Thomas Mair + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "rtl2832_priv.h" +#include "dvb_math.h" +#include + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +int rtl2832_debug; +module_param_named(debug, rtl2832_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +#define REG_MASK(b) (BIT(b + 1) - 1) + +static const struct rtl2832_reg_entry registers[] = { + [DVBT_SOFT_RST] = {0x1, 0x1, 2, 2}, + [DVBT_IIC_REPEAT] = {0x1, 0x1, 3, 3}, + [DVBT_TR_WAIT_MIN_8K] = {0x1, 0x88, 11, 2}, + [DVBT_RSD_BER_FAIL_VAL] = {0x1, 0x8f, 15, 0}, + [DVBT_EN_BK_TRK] = {0x1, 0xa6, 7, 7}, + [DVBT_AD_EN_REG] = {0x0, 0x8, 7, 7}, + [DVBT_AD_EN_REG1] = {0x0, 0x8, 6, 6}, + [DVBT_EN_BBIN] = {0x1, 0xb1, 0, 0}, + [DVBT_MGD_THD0] = {0x1, 0x95, 7, 0}, + [DVBT_MGD_THD1] = {0x1, 0x96, 7, 0}, + [DVBT_MGD_THD2] = {0x1, 0x97, 7, 0}, + [DVBT_MGD_THD3] = {0x1, 0x98, 7, 0}, + [DVBT_MGD_THD4] = {0x1, 0x99, 7, 0}, + [DVBT_MGD_THD5] = {0x1, 0x9a, 7, 0}, + [DVBT_MGD_THD6] = {0x1, 0x9b, 7, 0}, + [DVBT_MGD_THD7] = {0x1, 0x9c, 7, 0}, + [DVBT_EN_CACQ_NOTCH] = {0x1, 0x61, 4, 4}, + [DVBT_AD_AV_REF] = {0x0, 0x9, 6, 0}, + [DVBT_REG_PI] = {0x0, 0xa, 2, 0}, + [DVBT_PIP_ON] = {0x0, 0x21, 3, 3}, + [DVBT_SCALE1_B92] = {0x2, 0x92, 7, 0}, + [DVBT_SCALE1_B93] = {0x2, 0x93, 7, 0}, + [DVBT_SCALE1_BA7] = {0x2, 0xa7, 7, 0}, + [DVBT_SCALE1_BA9] = {0x2, 0xa9, 7, 0}, + [DVBT_SCALE1_BAA] = {0x2, 0xaa, 7, 0}, + [DVBT_SCALE1_BAB] = {0x2, 0xab, 7, 0}, + [DVBT_SCALE1_BAC] = {0x2, 0xac, 7, 0}, + [DVBT_SCALE1_BB0] = {0x2, 0xb0, 7, 0}, + [DVBT_SCALE1_BB1] = {0x2, 0xb1, 7, 0}, + [DVBT_KB_P1] = {0x1, 0x64, 3, 1}, + [DVBT_KB_P2] = {0x1, 0x64, 6, 4}, + [DVBT_KB_P3] = {0x1, 0x65, 2, 0}, + [DVBT_OPT_ADC_IQ] = {0x0, 0x6, 5, 4}, + [DVBT_AD_AVI] = {0x0, 0x9, 1, 0}, + [DVBT_AD_AVQ] = {0x0, 0x9, 3, 2}, + [DVBT_K1_CR_STEP12] = {0x2, 0xad, 9, 4}, + [DVBT_TRK_KS_P2] = {0x1, 0x6f, 2, 0}, + [DVBT_TRK_KS_I2] = {0x1, 0x70, 5, 3}, + [DVBT_TR_THD_SET2] = {0x1, 0x72, 3, 0}, + [DVBT_TRK_KC_P2] = {0x1, 0x73, 5, 3}, + [DVBT_TRK_KC_I2] = {0x1, 0x75, 2, 0}, + [DVBT_CR_THD_SET2] = {0x1, 0x76, 7, 6}, + [DVBT_PSET_IFFREQ] = {0x1, 0x19, 21, 0}, + [DVBT_SPEC_INV] = {0x1, 0x15, 0, 0}, + [DVBT_RSAMP_RATIO] = {0x1, 0x9f, 27, 2}, + [DVBT_CFREQ_OFF_RATIO] = {0x1, 0x9d, 23, 4}, + [DVBT_FSM_STAGE] = {0x3, 0x51, 6, 3}, + [DVBT_RX_CONSTEL] = {0x3, 0x3c, 3, 2}, + [DVBT_RX_HIER] = {0x3, 0x3c, 6, 4}, + [DVBT_RX_C_RATE_LP] = {0x3, 0x3d, 2, 0}, + [DVBT_RX_C_RATE_HP] = {0x3, 0x3d, 5, 3}, + [DVBT_GI_IDX] = {0x3, 0x51, 1, 0}, + [DVBT_FFT_MODE_IDX] = {0x3, 0x51, 2, 2}, + [DVBT_RSD_BER_EST] = {0x3, 0x4e, 15, 0}, + [DVBT_CE_EST_EVM] = {0x4, 0xc, 15, 0}, + [DVBT_RF_AGC_VAL] = {0x3, 0x5b, 13, 0}, + [DVBT_IF_AGC_VAL] = {0x3, 0x59, 13, 0}, + [DVBT_DAGC_VAL] = {0x3, 0x5, 7, 0}, + [DVBT_SFREQ_OFF] = {0x3, 0x18, 13, 0}, + [DVBT_CFREQ_OFF] = {0x3, 0x5f, 17, 0}, + [DVBT_POLAR_RF_AGC] = {0x0, 0xe, 1, 1}, + [DVBT_POLAR_IF_AGC] = {0x0, 0xe, 0, 0}, + [DVBT_AAGC_HOLD] = {0x1, 0x4, 5, 5}, + [DVBT_EN_RF_AGC] = {0x1, 0x4, 6, 6}, + [DVBT_EN_IF_AGC] = {0x1, 0x4, 7, 7}, + [DVBT_IF_AGC_MIN] = {0x1, 0x8, 7, 0}, + [DVBT_IF_AGC_MAX] = {0x1, 0x9, 7, 0}, + [DVBT_RF_AGC_MIN] = {0x1, 0xa, 7, 0}, + [DVBT_RF_AGC_MAX] = {0x1, 0xb, 7, 0}, + [DVBT_IF_AGC_MAN] = {0x1, 0xc, 6, 6}, + [DVBT_IF_AGC_MAN_VAL] = {0x1, 0xc, 13, 0}, + [DVBT_RF_AGC_MAN] = {0x1, 0xe, 6, 6}, + [DVBT_RF_AGC_MAN_VAL] = {0x1, 0xe, 13, 0}, + [DVBT_DAGC_TRG_VAL] = {0x1, 0x12, 7, 0}, + [DVBT_AGC_TARG_VAL_0] = {0x1, 0x2, 0, 0}, + [DVBT_AGC_TARG_VAL_8_1] = {0x1, 0x3, 7, 0}, + [DVBT_AAGC_LOOP_GAIN] = {0x1, 0xc7, 5, 1}, + [DVBT_LOOP_GAIN2_3_0] = {0x1, 0x4, 4, 1}, + [DVBT_LOOP_GAIN2_4] = {0x1, 0x5, 7, 7}, + [DVBT_LOOP_GAIN3] = {0x1, 0xc8, 4, 0}, + [DVBT_VTOP1] = {0x1, 0x6, 5, 0}, + [DVBT_VTOP2] = {0x1, 0xc9, 5, 0}, + [DVBT_VTOP3] = {0x1, 0xca, 5, 0}, + [DVBT_KRF1] = {0x1, 0xcb, 7, 0}, + [DVBT_KRF2] = {0x1, 0x7, 7, 0}, + [DVBT_KRF3] = {0x1, 0xcd, 7, 0}, + [DVBT_KRF4] = {0x1, 0xce, 7, 0}, + [DVBT_EN_GI_PGA] = {0x1, 0xe5, 0, 0}, + [DVBT_THD_LOCK_UP] = {0x1, 0xd9, 8, 0}, + [DVBT_THD_LOCK_DW] = {0x1, 0xdb, 8, 0}, + [DVBT_THD_UP1] = {0x1, 0xdd, 7, 0}, + [DVBT_THD_DW1] = {0x1, 0xde, 7, 0}, + [DVBT_INTER_CNT_LEN] = {0x1, 0xd8, 3, 0}, + [DVBT_GI_PGA_STATE] = {0x1, 0xe6, 3, 3}, + [DVBT_EN_AGC_PGA] = {0x1, 0xd7, 0, 0}, + [DVBT_CKOUTPAR] = {0x1, 0x7b, 5, 5}, + [DVBT_CKOUT_PWR] = {0x1, 0x7b, 6, 6}, + [DVBT_SYNC_DUR] = {0x1, 0x7b, 7, 7}, + [DVBT_ERR_DUR] = {0x1, 0x7c, 0, 0}, + [DVBT_SYNC_LVL] = {0x1, 0x7c, 1, 1}, + [DVBT_ERR_LVL] = {0x1, 0x7c, 2, 2}, + [DVBT_VAL_LVL] = {0x1, 0x7c, 3, 3}, + [DVBT_SERIAL] = {0x1, 0x7c, 4, 4}, + [DVBT_SER_LSB] = {0x1, 0x7c, 5, 5}, + [DVBT_CDIV_PH0] = {0x1, 0x7d, 3, 0}, + [DVBT_CDIV_PH1] = {0x1, 0x7d, 7, 4}, + [DVBT_MPEG_IO_OPT_2_2] = {0x0, 0x6, 7, 7}, + [DVBT_MPEG_IO_OPT_1_0] = {0x0, 0x7, 7, 6}, + [DVBT_CKOUTPAR_PIP] = {0x0, 0xb7, 4, 4}, + [DVBT_CKOUT_PWR_PIP] = {0x0, 0xb7, 3, 3}, + [DVBT_SYNC_LVL_PIP] = {0x0, 0xb7, 2, 2}, + [DVBT_ERR_LVL_PIP] = {0x0, 0xb7, 1, 1}, + [DVBT_VAL_LVL_PIP] = {0x0, 0xb7, 0, 0}, + [DVBT_CKOUTPAR_PID] = {0x0, 0xb9, 4, 4}, + [DVBT_CKOUT_PWR_PID] = {0x0, 0xb9, 3, 3}, + [DVBT_SYNC_LVL_PID] = {0x0, 0xb9, 2, 2}, + [DVBT_ERR_LVL_PID] = {0x0, 0xb9, 1, 1}, + [DVBT_VAL_LVL_PID] = {0x0, 0xb9, 0, 0}, + [DVBT_SM_PASS] = {0x1, 0x93, 11, 0}, + [DVBT_AD7_SETTING] = {0x0, 0x11, 15, 0}, + [DVBT_RSSI_R] = {0x3, 0x1, 6, 0}, + [DVBT_ACI_DET_IND] = {0x3, 0x12, 0, 0}, + [DVBT_REG_MON] = {0x0, 0xd, 1, 0}, + [DVBT_REG_MONSEL] = {0x0, 0xd, 2, 2}, + [DVBT_REG_GPE] = {0x0, 0xd, 7, 7}, + [DVBT_REG_GPO] = {0x0, 0x10, 0, 0}, + [DVBT_REG_4MSEL] = {0x0, 0x13, 0, 0}, +}; + +/* write multiple hardware registers */ +static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 1 + len, + .buf = buf, + } + }; + + if (1 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + buf[0] = reg; + memcpy(&buf[1], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple hardware registers */ +static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + struct i2c_msg msg[2] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 1, + .buf = ®, + }, { + .addr = priv->cfg.i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = val, + } + }; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* write multiple registers */ +static int rtl2832_wr_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val, + int len) +{ + int ret; + + /* switch bank if needed */ + if (page != priv->page) { + ret = rtl2832_wr(priv, 0x00, &page, 1); + if (ret) + return ret; + + priv->page = page; +} + +return rtl2832_wr(priv, reg, val, len); +} + +/* read multiple registers */ +static int rtl2832_rd_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val, + int len) +{ + int ret; + + /* switch bank if needed */ + if (page != priv->page) { + ret = rtl2832_wr(priv, 0x00, &page, 1); + if (ret) + return ret; + + priv->page = page; + } + + return rtl2832_rd(priv, reg, val, len); +} + +#if 0 /* currently not used */ +/* write single register */ +static int rtl2832_wr_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 val) +{ + return rtl2832_wr_regs(priv, reg, page, &val, 1); +} +#endif + +/* read single register */ +static int rtl2832_rd_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val) +{ + return rtl2832_rd_regs(priv, reg, page, val, 1); +} + +static int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val) +{ + int ret; + + u8 reg_start_addr; + u8 msb, lsb; + u8 page; + u8 reading[4]; + u32 reading_tmp; + int i; + + u8 len; + u32 mask; + + reg_start_addr = registers[reg].start_address; + msb = registers[reg].msb; + lsb = registers[reg].lsb; + page = registers[reg].page; + + len = (msb >> 3) + 1; + mask = REG_MASK(msb - lsb); + + ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len); + if (ret) + goto err; + + reading_tmp = 0; + for (i = 0; i < len; i++) + reading_tmp |= reading[i] << ((len - 1 - i) * 8); + + *val = (reading_tmp >> lsb) & mask; + + return ret; + +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; + +} + +static int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val) +{ + int ret, i; + u8 len; + u8 reg_start_addr; + u8 msb, lsb; + u8 page; + u32 mask; + + + u8 reading[4]; + u8 writing[4]; + u32 reading_tmp; + u32 writing_tmp; + + + reg_start_addr = registers[reg].start_address; + msb = registers[reg].msb; + lsb = registers[reg].lsb; + page = registers[reg].page; + + len = (msb >> 3) + 1; + mask = REG_MASK(msb - lsb); + + + ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len); + if (ret) + goto err; + + reading_tmp = 0; + for (i = 0; i < len; i++) + reading_tmp |= reading[i] << ((len - 1 - i) * 8); + + writing_tmp = reading_tmp & ~(mask << lsb); + writing_tmp |= ((val & mask) << lsb); + + + for (i = 0; i < len; i++) + writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff; + + ret = rtl2832_wr_regs(priv, reg_start_addr, page, &writing[0], len); + if (ret) + goto err; + + return ret; + +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; + +} + +static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + int ret; + struct rtl2832_priv *priv = fe->demodulator_priv; + + dev_dbg(&priv->i2c->dev, "%s: enable=%d\n", __func__, enable); + + /* gate already open or close */ + if (priv->i2c_gate_state == enable) + return 0; + + ret = rtl2832_wr_demod_reg(priv, DVBT_IIC_REPEAT, (enable ? 0x1 : 0x0)); + if (ret) + goto err; + + priv->i2c_gate_state = enable; + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + + +static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + int ret; + u64 pset_iffreq; + u8 en_bbin = (if_freq == 0 ? 0x1 : 0x0); + + /* + * PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22) + * / CrystalFreqHz) + */ + + pset_iffreq = if_freq % priv->cfg.xtal; + pset_iffreq *= 0x400000; + pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal); + pset_iffreq = -pset_iffreq; + pset_iffreq = pset_iffreq & 0x3fffff; + dev_dbg(&priv->i2c->dev, "%s: if_frequency=%d pset_iffreq=%08x\n", + __func__, if_freq, (unsigned)pset_iffreq); + + ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin); + if (ret) + return ret; + + ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq); + + return (ret); +} + +static int rtl2832_init(struct dvb_frontend *fe) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + const struct rtl2832_reg_value *init; + int i, ret, len; + + /* initialization values for the demodulator registers */ + struct rtl2832_reg_value rtl2832_initial_regs[] = { + {DVBT_AD_EN_REG, 0x1}, + {DVBT_AD_EN_REG1, 0x1}, + {DVBT_RSD_BER_FAIL_VAL, 0x2800}, + {DVBT_MGD_THD0, 0x10}, + {DVBT_MGD_THD1, 0x20}, + {DVBT_MGD_THD2, 0x20}, + {DVBT_MGD_THD3, 0x40}, + {DVBT_MGD_THD4, 0x22}, + {DVBT_MGD_THD5, 0x32}, + {DVBT_MGD_THD6, 0x37}, + {DVBT_MGD_THD7, 0x39}, + {DVBT_EN_BK_TRK, 0x0}, + {DVBT_EN_CACQ_NOTCH, 0x0}, + {DVBT_AD_AV_REF, 0x2a}, + {DVBT_REG_PI, 0x6}, + {DVBT_PIP_ON, 0x0}, + {DVBT_CDIV_PH0, 0x8}, + {DVBT_CDIV_PH1, 0x8}, + {DVBT_SCALE1_B92, 0x4}, + {DVBT_SCALE1_B93, 0xb0}, + {DVBT_SCALE1_BA7, 0x78}, + {DVBT_SCALE1_BA9, 0x28}, + {DVBT_SCALE1_BAA, 0x59}, + {DVBT_SCALE1_BAB, 0x83}, + {DVBT_SCALE1_BAC, 0xd4}, + {DVBT_SCALE1_BB0, 0x65}, + {DVBT_SCALE1_BB1, 0x43}, + {DVBT_KB_P1, 0x1}, + {DVBT_KB_P2, 0x4}, + {DVBT_KB_P3, 0x7}, + {DVBT_K1_CR_STEP12, 0xa}, + {DVBT_REG_GPE, 0x1}, + {DVBT_SERIAL, 0x0}, + {DVBT_CDIV_PH0, 0x9}, + {DVBT_CDIV_PH1, 0x9}, + {DVBT_MPEG_IO_OPT_2_2, 0x0}, + {DVBT_MPEG_IO_OPT_1_0, 0x0}, + {DVBT_TRK_KS_P2, 0x4}, + {DVBT_TRK_KS_I2, 0x7}, + {DVBT_TR_THD_SET2, 0x6}, + {DVBT_TRK_KC_I2, 0x5}, + {DVBT_CR_THD_SET2, 0x1}, + }; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) { + ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg, + rtl2832_initial_regs[i].value); + if (ret) + goto err; + } + + /* load tuner specific settings */ + dev_dbg(&priv->i2c->dev, "%s: load settings for tuner=%02x\n", + __func__, priv->cfg.tuner); + switch (priv->cfg.tuner) { + case RTL2832_TUNER_FC0012: + case RTL2832_TUNER_FC0013: + len = ARRAY_SIZE(rtl2832_tuner_init_fc0012); + init = rtl2832_tuner_init_fc0012; + break; + case RTL2832_TUNER_TUA9001: + len = ARRAY_SIZE(rtl2832_tuner_init_tua9001); + init = rtl2832_tuner_init_tua9001; + break; + case RTL2832_TUNER_E4000: + len = ARRAY_SIZE(rtl2832_tuner_init_e4000); + init = rtl2832_tuner_init_e4000; + break; + case RTL2832_TUNER_R820T: + len = ARRAY_SIZE(rtl2832_tuner_init_r820t); + init = rtl2832_tuner_init_r820t; + break; + default: + ret = -EINVAL; + goto err; + } + + for (i = 0; i < len; i++) { + ret = rtl2832_wr_demod_reg(priv, init[i].reg, init[i].value); + if (ret) + goto err; + } + + if (!fe->ops.tuner_ops.get_if_frequency) { + ret = rtl2832_set_if(fe, priv->cfg.if_dvbt); + if (ret) + goto err; + } + + /* + * r820t NIM code does a software reset here at the demod - + * may not be needed, as there's already a software reset at set_params() + */ +#if 1 + /* soft reset */ + ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1); + if (ret) + goto err; + + ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0); + if (ret) + goto err; +#endif + + priv->sleeping = false; + + return ret; + +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832_sleep(struct dvb_frontend *fe) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + priv->sleeping = true; + return 0; +} + +static int rtl2832_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + s->min_delay_ms = 1000; + s->step_size = fe->ops.info.frequency_stepsize * 2; + s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; + return 0; +} + +static int rtl2832_set_frontend(struct dvb_frontend *fe) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i, j; + u64 bw_mode, num, num2; + u32 resamp_ratio, cfreq_off_ratio; + static u8 bw_params[3][32] = { + /* 6 MHz bandwidth */ + { + 0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f, + 0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2, + 0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67, + 0x19, 0xe0, + }, + + /* 7 MHz bandwidth */ + { + 0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf, + 0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30, + 0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22, + 0x19, 0x10, + }, + + /* 8 MHz bandwidth */ + { + 0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf, + 0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7, + 0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8, + 0x19, 0xe0, + }, + }; + + + dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d " \ + "inversion=%d\n", __func__, c->frequency, + c->bandwidth_hz, c->inversion); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* If the frontend has get_if_frequency(), use it */ + if (fe->ops.tuner_ops.get_if_frequency) { + u32 if_freq; + + ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); + if (ret) + goto err; + + ret = rtl2832_set_if(fe, if_freq); + if (ret) + goto err; + } + + switch (c->bandwidth_hz) { + case 6000000: + i = 0; + bw_mode = 48000000; + break; + case 7000000: + i = 1; + bw_mode = 56000000; + break; + case 8000000: + i = 2; + bw_mode = 64000000; + break; + default: + dev_dbg(&priv->i2c->dev, "%s: invalid bandwidth\n", __func__); + return -EINVAL; + } + + for (j = 0; j < sizeof(bw_params[0]); j++) { + ret = rtl2832_wr_regs(priv, 0x1c+j, 1, &bw_params[i][j], 1); + if (ret) + goto err; + } + + /* calculate and set resample ratio + * RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22) + * / ConstWithBandwidthMode) + */ + num = priv->cfg.xtal * 7; + num *= 0x400000; + num = div_u64(num, bw_mode); + resamp_ratio = num & 0x3ffffff; + ret = rtl2832_wr_demod_reg(priv, DVBT_RSAMP_RATIO, resamp_ratio); + if (ret) + goto err; + + /* calculate and set cfreq off ratio + * CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20) + * / (CrystalFreqHz * 7)) + */ + num = bw_mode << 20; + num2 = priv->cfg.xtal * 7; + num = div_u64(num, num2); + num = -num; + cfreq_off_ratio = num & 0xfffff; + ret = rtl2832_wr_demod_reg(priv, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio); + if (ret) + goto err; + + + /* soft reset */ + ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1); + if (ret) + goto err; + + ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832_get_frontend(struct dvb_frontend *fe) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + u8 buf[3]; + + if (priv->sleeping) + return 0; + + ret = rtl2832_rd_regs(priv, 0x3c, 3, buf, 2); + if (ret) + goto err; + + ret = rtl2832_rd_reg(priv, 0x51, 3, &buf[2]); + if (ret) + goto err; + + dev_dbg(&priv->i2c->dev, "%s: TPS=%*ph\n", __func__, 3, buf); + + switch ((buf[0] >> 2) & 3) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + } + + switch ((buf[2] >> 2) & 1) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_8K; + } + + switch ((buf[2] >> 0) & 3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[0] >> 4) & 7) { + case 0: + c->hierarchy = HIERARCHY_NONE; + break; + case 1: + c->hierarchy = HIERARCHY_1; + break; + case 2: + c->hierarchy = HIERARCHY_2; + break; + case 3: + c->hierarchy = HIERARCHY_4; + break; + } + + switch ((buf[1] >> 3) & 7) { + case 0: + c->code_rate_HP = FEC_1_2; + break; + case 1: + c->code_rate_HP = FEC_2_3; + break; + case 2: + c->code_rate_HP = FEC_3_4; + break; + case 3: + c->code_rate_HP = FEC_5_6; + break; + case 4: + c->code_rate_HP = FEC_7_8; + break; + } + + switch ((buf[1] >> 0) & 7) { + case 0: + c->code_rate_LP = FEC_1_2; + break; + case 1: + c->code_rate_LP = FEC_2_3; + break; + case 2: + c->code_rate_LP = FEC_3_4; + break; + case 3: + c->code_rate_LP = FEC_5_6; + break; + case 4: + c->code_rate_LP = FEC_7_8; + break; + } + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + int ret; + u32 tmp; + *status = 0; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + if (priv->sleeping) + return 0; + + ret = rtl2832_rd_demod_reg(priv, DVBT_FSM_STAGE, &tmp); + if (ret) + goto err; + + if (tmp == 11) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } + /* TODO find out if this is also true for rtl2832? */ + /*else if (tmp == 10) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI; + }*/ + + return ret; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + int ret, hierarchy, constellation; + u8 buf[2], tmp; + u16 tmp16; +#define CONSTELLATION_NUM 3 +#define HIERARCHY_NUM 4 + static const u32 snr_constant[CONSTELLATION_NUM][HIERARCHY_NUM] = { + { 85387325, 85387325, 85387325, 85387325 }, + { 86676178, 86676178, 87167949, 87795660 }, + { 87659938, 87659938, 87885178, 88241743 }, + }; + + /* reports SNR in resolution of 0.1 dB */ + + ret = rtl2832_rd_reg(priv, 0x3c, 3, &tmp); + if (ret) + goto err; + + constellation = (tmp >> 2) & 0x03; /* [3:2] */ + if (constellation > CONSTELLATION_NUM - 1) + goto err; + + hierarchy = (tmp >> 4) & 0x07; /* [6:4] */ + if (hierarchy > HIERARCHY_NUM - 1) + goto err; + + ret = rtl2832_rd_regs(priv, 0x0c, 4, buf, 2); + if (ret) + goto err; + + tmp16 = buf[0] << 8 | buf[1]; + + if (tmp16) + *snr = (snr_constant[constellation][hierarchy] - + intlog10(tmp16)) / ((1 << 24) / 100); + else + *snr = 0; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + + ret = rtl2832_rd_regs(priv, 0x4e, 3, buf, 2); + if (ret) + goto err; + + *ber = buf[0] << 8 | buf[1]; + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct dvb_frontend_ops rtl2832_ops; + +static void rtl2832_release(struct dvb_frontend *fe) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + kfree(priv); +} + +struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg, + struct i2c_adapter *i2c) +{ + struct rtl2832_priv *priv = NULL; + int ret = 0; + u8 tmp; + + dev_dbg(&i2c->dev, "%s:\n", __func__); + + /* allocate memory for the internal state */ + priv = kzalloc(sizeof(struct rtl2832_priv), GFP_KERNEL); + if (priv == NULL) + goto err; + + /* setup the priv */ + priv->i2c = i2c; + priv->tuner = cfg->tuner; + memcpy(&priv->cfg, cfg, sizeof(struct rtl2832_config)); + + /* check if the demod is there */ + ret = rtl2832_rd_reg(priv, 0x00, 0x0, &tmp); + if (ret) + goto err; + + /* create dvb_frontend */ + memcpy(&priv->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops)); + priv->fe.demodulator_priv = priv; + + /* TODO implement sleep mode */ + priv->sleeping = true; + + return &priv->fe; +err: + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(rtl2832_attach); + +static struct dvb_frontend_ops rtl2832_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Realtek RTL2832 (DVB-T)", + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 166667, + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = rtl2832_release, + + .init = rtl2832_init, + .sleep = rtl2832_sleep, + + .get_tune_settings = rtl2832_get_tune_settings, + + .set_frontend = rtl2832_set_frontend, + .get_frontend = rtl2832_get_frontend, + + .read_status = rtl2832_read_status, + .read_snr = rtl2832_read_snr, + .read_ber = rtl2832_read_ber, + + .i2c_gate_ctrl = rtl2832_i2c_gate_ctrl, +}; + +MODULE_AUTHOR("Thomas Mair "); +MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.5"); diff --git a/drivers/media/dvb-frontends/rtl2832.h b/drivers/media/dvb-frontends/rtl2832.h new file mode 100644 index 00000000..91b2dcf5 --- /dev/null +++ b/drivers/media/dvb-frontends/rtl2832.h @@ -0,0 +1,76 @@ +/* + * Realtek RTL2832 DVB-T demodulator driver + * + * Copyright (C) 2012 Thomas Mair + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL2832_H +#define RTL2832_H + +#include +#include + +struct rtl2832_config { + /* + * Demodulator I2C address. + */ + u8 i2c_addr; + + /* + * Xtal frequency. + * Hz + * 4000000, 16000000, 25000000, 28800000 + */ + u32 xtal; + + /* + * IFs for all used modes. + * Hz + * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000 + */ + u32 if_dvbt; + + /* + * tuner + * XXX: This must be keep sync with dvb_usb_rtl28xxu demod driver. + */ +#define RTL2832_TUNER_TUA9001 0x24 +#define RTL2832_TUNER_FC0012 0x26 +#define RTL2832_TUNER_E4000 0x27 +#define RTL2832_TUNER_FC0013 0x29 +#define RTL2832_TUNER_R820T 0x2a + u8 tuner; +}; + +#if IS_ENABLED(CONFIG_DVB_RTL2832) +extern struct dvb_frontend *rtl2832_attach( + const struct rtl2832_config *cfg, + struct i2c_adapter *i2c +); +#else +static inline struct dvb_frontend *rtl2832_attach( + const struct rtl2832_config *config, + struct i2c_adapter *i2c +) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + + +#endif /* RTL2832_H */ diff --git a/drivers/media/dvb-frontends/rtl2832_priv.h b/drivers/media/dvb-frontends/rtl2832_priv.h new file mode 100644 index 00000000..b5f2b800 --- /dev/null +++ b/drivers/media/dvb-frontends/rtl2832_priv.h @@ -0,0 +1,370 @@ +/* + * Realtek RTL2832 DVB-T demodulator driver + * + * Copyright (C) 2012 Thomas Mair + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL2832_PRIV_H +#define RTL2832_PRIV_H + +#include "dvb_frontend.h" +#include "rtl2832.h" + +struct rtl2832_priv { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct rtl2832_config cfg; + + bool i2c_gate_state; + bool sleeping; + + u8 tuner; + u8 page; /* active register page */ +}; + +struct rtl2832_reg_entry { + u8 page; + u8 start_address; + u8 msb; + u8 lsb; +}; + +struct rtl2832_reg_value { + int reg; + u32 value; +}; + + +/* Demod register bit names */ +enum DVBT_REG_BIT_NAME { + DVBT_SOFT_RST, + DVBT_IIC_REPEAT, + DVBT_TR_WAIT_MIN_8K, + DVBT_RSD_BER_FAIL_VAL, + DVBT_EN_BK_TRK, + DVBT_REG_PI, + DVBT_REG_PFREQ_1_0, + DVBT_PD_DA8, + DVBT_LOCK_TH, + DVBT_BER_PASS_SCAL, + DVBT_CE_FFSM_BYPASS, + DVBT_ALPHAIIR_N, + DVBT_ALPHAIIR_DIF, + DVBT_EN_TRK_SPAN, + DVBT_LOCK_TH_LEN, + DVBT_CCI_THRE, + DVBT_CCI_MON_SCAL, + DVBT_CCI_M0, + DVBT_CCI_M1, + DVBT_CCI_M2, + DVBT_CCI_M3, + DVBT_SPEC_INIT_0, + DVBT_SPEC_INIT_1, + DVBT_SPEC_INIT_2, + DVBT_AD_EN_REG, + DVBT_AD_EN_REG1, + DVBT_EN_BBIN, + DVBT_MGD_THD0, + DVBT_MGD_THD1, + DVBT_MGD_THD2, + DVBT_MGD_THD3, + DVBT_MGD_THD4, + DVBT_MGD_THD5, + DVBT_MGD_THD6, + DVBT_MGD_THD7, + DVBT_EN_CACQ_NOTCH, + DVBT_AD_AV_REF, + DVBT_PIP_ON, + DVBT_SCALE1_B92, + DVBT_SCALE1_B93, + DVBT_SCALE1_BA7, + DVBT_SCALE1_BA9, + DVBT_SCALE1_BAA, + DVBT_SCALE1_BAB, + DVBT_SCALE1_BAC, + DVBT_SCALE1_BB0, + DVBT_SCALE1_BB1, + DVBT_KB_P1, + DVBT_KB_P2, + DVBT_KB_P3, + DVBT_OPT_ADC_IQ, + DVBT_AD_AVI, + DVBT_AD_AVQ, + DVBT_K1_CR_STEP12, + DVBT_TRK_KS_P2, + DVBT_TRK_KS_I2, + DVBT_TR_THD_SET2, + DVBT_TRK_KC_P2, + DVBT_TRK_KC_I2, + DVBT_CR_THD_SET2, + DVBT_PSET_IFFREQ, + DVBT_SPEC_INV, + DVBT_BW_INDEX, + DVBT_RSAMP_RATIO, + DVBT_CFREQ_OFF_RATIO, + DVBT_FSM_STAGE, + DVBT_RX_CONSTEL, + DVBT_RX_HIER, + DVBT_RX_C_RATE_LP, + DVBT_RX_C_RATE_HP, + DVBT_GI_IDX, + DVBT_FFT_MODE_IDX, + DVBT_RSD_BER_EST, + DVBT_CE_EST_EVM, + DVBT_RF_AGC_VAL, + DVBT_IF_AGC_VAL, + DVBT_DAGC_VAL, + DVBT_SFREQ_OFF, + DVBT_CFREQ_OFF, + DVBT_POLAR_RF_AGC, + DVBT_POLAR_IF_AGC, + DVBT_AAGC_HOLD, + DVBT_EN_RF_AGC, + DVBT_EN_IF_AGC, + DVBT_IF_AGC_MIN, + DVBT_IF_AGC_MAX, + DVBT_RF_AGC_MIN, + DVBT_RF_AGC_MAX, + DVBT_IF_AGC_MAN, + DVBT_IF_AGC_MAN_VAL, + DVBT_RF_AGC_MAN, + DVBT_RF_AGC_MAN_VAL, + DVBT_DAGC_TRG_VAL, + DVBT_AGC_TARG_VAL, + DVBT_LOOP_GAIN_3_0, + DVBT_LOOP_GAIN_4, + DVBT_VTOP, + DVBT_KRF, + DVBT_AGC_TARG_VAL_0, + DVBT_AGC_TARG_VAL_8_1, + DVBT_AAGC_LOOP_GAIN, + DVBT_LOOP_GAIN2_3_0, + DVBT_LOOP_GAIN2_4, + DVBT_LOOP_GAIN3, + DVBT_VTOP1, + DVBT_VTOP2, + DVBT_VTOP3, + DVBT_KRF1, + DVBT_KRF2, + DVBT_KRF3, + DVBT_KRF4, + DVBT_EN_GI_PGA, + DVBT_THD_LOCK_UP, + DVBT_THD_LOCK_DW, + DVBT_THD_UP1, + DVBT_THD_DW1, + DVBT_INTER_CNT_LEN, + DVBT_GI_PGA_STATE, + DVBT_EN_AGC_PGA, + DVBT_CKOUTPAR, + DVBT_CKOUT_PWR, + DVBT_SYNC_DUR, + DVBT_ERR_DUR, + DVBT_SYNC_LVL, + DVBT_ERR_LVL, + DVBT_VAL_LVL, + DVBT_SERIAL, + DVBT_SER_LSB, + DVBT_CDIV_PH0, + DVBT_CDIV_PH1, + DVBT_MPEG_IO_OPT_2_2, + DVBT_MPEG_IO_OPT_1_0, + DVBT_CKOUTPAR_PIP, + DVBT_CKOUT_PWR_PIP, + DVBT_SYNC_LVL_PIP, + DVBT_ERR_LVL_PIP, + DVBT_VAL_LVL_PIP, + DVBT_CKOUTPAR_PID, + DVBT_CKOUT_PWR_PID, + DVBT_SYNC_LVL_PID, + DVBT_ERR_LVL_PID, + DVBT_VAL_LVL_PID, + DVBT_SM_PASS, + DVBT_UPDATE_REG_2, + DVBT_BTHD_P3, + DVBT_BTHD_D3, + DVBT_FUNC4_REG0, + DVBT_FUNC4_REG1, + DVBT_FUNC4_REG2, + DVBT_FUNC4_REG3, + DVBT_FUNC4_REG4, + DVBT_FUNC4_REG5, + DVBT_FUNC4_REG6, + DVBT_FUNC4_REG7, + DVBT_FUNC4_REG8, + DVBT_FUNC4_REG9, + DVBT_FUNC4_REG10, + DVBT_FUNC5_REG0, + DVBT_FUNC5_REG1, + DVBT_FUNC5_REG2, + DVBT_FUNC5_REG3, + DVBT_FUNC5_REG4, + DVBT_FUNC5_REG5, + DVBT_FUNC5_REG6, + DVBT_FUNC5_REG7, + DVBT_FUNC5_REG8, + DVBT_FUNC5_REG9, + DVBT_FUNC5_REG10, + DVBT_FUNC5_REG11, + DVBT_FUNC5_REG12, + DVBT_FUNC5_REG13, + DVBT_FUNC5_REG14, + DVBT_FUNC5_REG15, + DVBT_FUNC5_REG16, + DVBT_FUNC5_REG17, + DVBT_FUNC5_REG18, + DVBT_AD7_SETTING, + DVBT_RSSI_R, + DVBT_ACI_DET_IND, + DVBT_REG_MON, + DVBT_REG_MONSEL, + DVBT_REG_GPE, + DVBT_REG_GPO, + DVBT_REG_4MSEL, + DVBT_TEST_REG_1, + DVBT_TEST_REG_2, + DVBT_TEST_REG_3, + DVBT_TEST_REG_4, + DVBT_REG_BIT_NAME_ITEM_TERMINATOR, +}; + +static const struct rtl2832_reg_value rtl2832_tuner_init_tua9001[] = { + {DVBT_DAGC_TRG_VAL, 0x39}, + {DVBT_AGC_TARG_VAL_0, 0x0}, + {DVBT_AGC_TARG_VAL_8_1, 0x5a}, + {DVBT_AAGC_LOOP_GAIN, 0x16}, + {DVBT_LOOP_GAIN2_3_0, 0x6}, + {DVBT_LOOP_GAIN2_4, 0x1}, + {DVBT_LOOP_GAIN3, 0x16}, + {DVBT_VTOP1, 0x35}, + {DVBT_VTOP2, 0x21}, + {DVBT_VTOP3, 0x21}, + {DVBT_KRF1, 0x0}, + {DVBT_KRF2, 0x40}, + {DVBT_KRF3, 0x10}, + {DVBT_KRF4, 0x10}, + {DVBT_IF_AGC_MIN, 0x80}, + {DVBT_IF_AGC_MAX, 0x7f}, + {DVBT_RF_AGC_MIN, 0x9c}, + {DVBT_RF_AGC_MAX, 0x7f}, + {DVBT_POLAR_RF_AGC, 0x0}, + {DVBT_POLAR_IF_AGC, 0x0}, + {DVBT_AD7_SETTING, 0xe9f4}, + {DVBT_OPT_ADC_IQ, 0x1}, + {DVBT_AD_AVI, 0x0}, + {DVBT_AD_AVQ, 0x0}, + {DVBT_SPEC_INV, 0x0}, +}; + +static const struct rtl2832_reg_value rtl2832_tuner_init_fc0012[] = { + {DVBT_DAGC_TRG_VAL, 0x5a}, + {DVBT_AGC_TARG_VAL_0, 0x0}, + {DVBT_AGC_TARG_VAL_8_1, 0x5a}, + {DVBT_AAGC_LOOP_GAIN, 0x16}, + {DVBT_LOOP_GAIN2_3_0, 0x6}, + {DVBT_LOOP_GAIN2_4, 0x1}, + {DVBT_LOOP_GAIN3, 0x16}, + {DVBT_VTOP1, 0x35}, + {DVBT_VTOP2, 0x21}, + {DVBT_VTOP3, 0x21}, + {DVBT_KRF1, 0x0}, + {DVBT_KRF2, 0x40}, + {DVBT_KRF3, 0x10}, + {DVBT_KRF4, 0x10}, + {DVBT_IF_AGC_MIN, 0x80}, + {DVBT_IF_AGC_MAX, 0x7f}, + {DVBT_RF_AGC_MIN, 0x80}, + {DVBT_RF_AGC_MAX, 0x7f}, + {DVBT_POLAR_RF_AGC, 0x0}, + {DVBT_POLAR_IF_AGC, 0x0}, + {DVBT_AD7_SETTING, 0xe9bf}, + {DVBT_EN_GI_PGA, 0x0}, + {DVBT_THD_LOCK_UP, 0x0}, + {DVBT_THD_LOCK_DW, 0x0}, + {DVBT_THD_UP1, 0x11}, + {DVBT_THD_DW1, 0xef}, + {DVBT_INTER_CNT_LEN, 0xc}, + {DVBT_GI_PGA_STATE, 0x0}, + {DVBT_EN_AGC_PGA, 0x1}, + {DVBT_IF_AGC_MAN, 0x0}, + {DVBT_SPEC_INV, 0x0}, +}; + +static const struct rtl2832_reg_value rtl2832_tuner_init_e4000[] = { + {DVBT_DAGC_TRG_VAL, 0x5a}, + {DVBT_AGC_TARG_VAL_0, 0x0}, + {DVBT_AGC_TARG_VAL_8_1, 0x5a}, + {DVBT_AAGC_LOOP_GAIN, 0x18}, + {DVBT_LOOP_GAIN2_3_0, 0x8}, + {DVBT_LOOP_GAIN2_4, 0x1}, + {DVBT_LOOP_GAIN3, 0x18}, + {DVBT_VTOP1, 0x35}, + {DVBT_VTOP2, 0x21}, + {DVBT_VTOP3, 0x21}, + {DVBT_KRF1, 0x0}, + {DVBT_KRF2, 0x40}, + {DVBT_KRF3, 0x10}, + {DVBT_KRF4, 0x10}, + {DVBT_IF_AGC_MIN, 0x80}, + {DVBT_IF_AGC_MAX, 0x7f}, + {DVBT_RF_AGC_MIN, 0x80}, + {DVBT_RF_AGC_MAX, 0x7f}, + {DVBT_POLAR_RF_AGC, 0x0}, + {DVBT_POLAR_IF_AGC, 0x0}, + {DVBT_AD7_SETTING, 0xe9d4}, + {DVBT_EN_GI_PGA, 0x0}, + {DVBT_THD_LOCK_UP, 0x0}, + {DVBT_THD_LOCK_DW, 0x0}, + {DVBT_THD_UP1, 0x14}, + {DVBT_THD_DW1, 0xec}, + {DVBT_INTER_CNT_LEN, 0xc}, + {DVBT_GI_PGA_STATE, 0x0}, + {DVBT_EN_AGC_PGA, 0x1}, + {DVBT_REG_GPE, 0x1}, + {DVBT_REG_GPO, 0x1}, + {DVBT_REG_MONSEL, 0x1}, + {DVBT_REG_MON, 0x1}, + {DVBT_REG_4MSEL, 0x0}, + {DVBT_SPEC_INV, 0x0}, +}; + +static const struct rtl2832_reg_value rtl2832_tuner_init_r820t[] = { + {DVBT_DAGC_TRG_VAL, 0x39}, + {DVBT_AGC_TARG_VAL_0, 0x0}, + {DVBT_AGC_TARG_VAL_8_1, 0x40}, + {DVBT_AAGC_LOOP_GAIN, 0x16}, + {DVBT_LOOP_GAIN2_3_0, 0x8}, + {DVBT_LOOP_GAIN2_4, 0x1}, + {DVBT_LOOP_GAIN3, 0x18}, + {DVBT_VTOP1, 0x35}, + {DVBT_VTOP2, 0x21}, + {DVBT_VTOP3, 0x21}, + {DVBT_KRF1, 0x0}, + {DVBT_KRF2, 0x40}, + {DVBT_KRF3, 0x10}, + {DVBT_KRF4, 0x10}, + {DVBT_IF_AGC_MIN, 0x80}, + {DVBT_IF_AGC_MAX, 0x7f}, + {DVBT_RF_AGC_MIN, 0x80}, + {DVBT_RF_AGC_MAX, 0x7f}, + {DVBT_POLAR_RF_AGC, 0x0}, + {DVBT_POLAR_IF_AGC, 0x0}, + {DVBT_AD7_SETTING, 0xe9f4}, + {DVBT_SPEC_INV, 0x1}, +}; + +#endif /* RTL2832_PRIV_H */ diff --git a/drivers/media/dvb-frontends/s5h1409.c b/drivers/media/dvb-frontends/s5h1409.c new file mode 100644 index 00000000..f71b0622 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1409.c @@ -0,0 +1,1029 @@ +/* + Samsung S5H1409 VSB/QAM demodulator driver + + Copyright (C) 2006 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "s5h1409.h" + +struct s5h1409_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct s5h1409_config *config; + + struct dvb_frontend frontend; + + /* previous uncorrected block counter */ + fe_modulation_t current_modulation; + + u32 current_frequency; + int if_freq; + + u32 is_qam_locked; + + /* QAM tuning state goes through the following state transitions */ +#define QAM_STATE_UNTUNED 0 +#define QAM_STATE_TUNING_STARTED 1 +#define QAM_STATE_INTERLEAVE_SET 2 +#define QAM_STATE_QAM_OPTIMIZED_L1 3 +#define QAM_STATE_QAM_OPTIMIZED_L2 4 +#define QAM_STATE_QAM_OPTIMIZED_L3 5 + u8 qam_state; +}; + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +#define dprintk if (debug) printk + +/* Register values to initialise the demod, this will set VSB by default */ +static struct init_tab { + u8 reg; + u16 data; +} init_tab[] = { + { 0x00, 0x0071, }, + { 0x01, 0x3213, }, + { 0x09, 0x0025, }, + { 0x1c, 0x001d, }, + { 0x1f, 0x002d, }, + { 0x20, 0x001d, }, + { 0x22, 0x0022, }, + { 0x23, 0x0020, }, + { 0x29, 0x110f, }, + { 0x2a, 0x10b4, }, + { 0x2b, 0x10ae, }, + { 0x2c, 0x0031, }, + { 0x31, 0x010d, }, + { 0x32, 0x0100, }, + { 0x44, 0x0510, }, + { 0x54, 0x0104, }, + { 0x58, 0x2222, }, + { 0x59, 0x1162, }, + { 0x5a, 0x3211, }, + { 0x5d, 0x0370, }, + { 0x5e, 0x0296, }, + { 0x61, 0x0010, }, + { 0x63, 0x4a00, }, + { 0x65, 0x0800, }, + { 0x71, 0x0003, }, + { 0x72, 0x0470, }, + { 0x81, 0x0002, }, + { 0x82, 0x0600, }, + { 0x86, 0x0002, }, + { 0x8a, 0x2c38, }, + { 0x8b, 0x2a37, }, + { 0x92, 0x302f, }, + { 0x93, 0x3332, }, + { 0x96, 0x000c, }, + { 0x99, 0x0101, }, + { 0x9c, 0x2e37, }, + { 0x9d, 0x2c37, }, + { 0x9e, 0x2c37, }, + { 0xab, 0x0100, }, + { 0xac, 0x1003, }, + { 0xad, 0x103f, }, + { 0xe2, 0x0100, }, + { 0xe3, 0x1000, }, + { 0x28, 0x1010, }, + { 0xb1, 0x000e, }, +}; + +/* VSB SNR lookup table */ +static struct vsb_snr_tab { + u16 val; + u16 data; +} vsb_snr_tab[] = { + { 924, 300, }, + { 923, 300, }, + { 918, 295, }, + { 915, 290, }, + { 911, 285, }, + { 906, 280, }, + { 901, 275, }, + { 896, 270, }, + { 891, 265, }, + { 885, 260, }, + { 879, 255, }, + { 873, 250, }, + { 864, 245, }, + { 858, 240, }, + { 850, 235, }, + { 841, 230, }, + { 832, 225, }, + { 823, 220, }, + { 812, 215, }, + { 802, 210, }, + { 788, 205, }, + { 778, 200, }, + { 767, 195, }, + { 753, 190, }, + { 740, 185, }, + { 725, 180, }, + { 707, 175, }, + { 689, 170, }, + { 671, 165, }, + { 656, 160, }, + { 637, 155, }, + { 616, 150, }, + { 542, 145, }, + { 519, 140, }, + { 507, 135, }, + { 497, 130, }, + { 492, 125, }, + { 474, 120, }, + { 300, 111, }, + { 0, 0, }, +}; + +/* QAM64 SNR lookup table */ +static struct qam64_snr_tab { + u16 val; + u16 data; +} qam64_snr_tab[] = { + { 1, 0, }, + { 12, 300, }, + { 15, 290, }, + { 18, 280, }, + { 22, 270, }, + { 23, 268, }, + { 24, 266, }, + { 25, 264, }, + { 27, 262, }, + { 28, 260, }, + { 29, 258, }, + { 30, 256, }, + { 32, 254, }, + { 33, 252, }, + { 34, 250, }, + { 35, 249, }, + { 36, 248, }, + { 37, 247, }, + { 38, 246, }, + { 39, 245, }, + { 40, 244, }, + { 41, 243, }, + { 42, 241, }, + { 43, 240, }, + { 44, 239, }, + { 45, 238, }, + { 46, 237, }, + { 47, 236, }, + { 48, 235, }, + { 49, 234, }, + { 50, 233, }, + { 51, 232, }, + { 52, 231, }, + { 53, 230, }, + { 55, 229, }, + { 56, 228, }, + { 57, 227, }, + { 58, 226, }, + { 59, 225, }, + { 60, 224, }, + { 62, 223, }, + { 63, 222, }, + { 65, 221, }, + { 66, 220, }, + { 68, 219, }, + { 69, 218, }, + { 70, 217, }, + { 72, 216, }, + { 73, 215, }, + { 75, 214, }, + { 76, 213, }, + { 78, 212, }, + { 80, 211, }, + { 81, 210, }, + { 83, 209, }, + { 84, 208, }, + { 85, 207, }, + { 87, 206, }, + { 89, 205, }, + { 91, 204, }, + { 93, 203, }, + { 95, 202, }, + { 96, 201, }, + { 104, 200, }, + { 255, 0, }, +}; + +/* QAM256 SNR lookup table */ +static struct qam256_snr_tab { + u16 val; + u16 data; +} qam256_snr_tab[] = { + { 1, 0, }, + { 12, 400, }, + { 13, 390, }, + { 15, 380, }, + { 17, 360, }, + { 19, 350, }, + { 22, 348, }, + { 23, 346, }, + { 24, 344, }, + { 25, 342, }, + { 26, 340, }, + { 27, 336, }, + { 28, 334, }, + { 29, 332, }, + { 30, 330, }, + { 31, 328, }, + { 32, 326, }, + { 33, 325, }, + { 34, 322, }, + { 35, 320, }, + { 37, 318, }, + { 39, 316, }, + { 40, 314, }, + { 41, 312, }, + { 42, 310, }, + { 43, 308, }, + { 46, 306, }, + { 47, 304, }, + { 49, 302, }, + { 51, 300, }, + { 53, 298, }, + { 54, 297, }, + { 55, 296, }, + { 56, 295, }, + { 57, 294, }, + { 59, 293, }, + { 60, 292, }, + { 61, 291, }, + { 63, 290, }, + { 64, 289, }, + { 65, 288, }, + { 66, 287, }, + { 68, 286, }, + { 69, 285, }, + { 71, 284, }, + { 72, 283, }, + { 74, 282, }, + { 75, 281, }, + { 76, 280, }, + { 77, 279, }, + { 78, 278, }, + { 81, 277, }, + { 83, 276, }, + { 84, 275, }, + { 86, 274, }, + { 87, 273, }, + { 89, 272, }, + { 90, 271, }, + { 92, 270, }, + { 93, 269, }, + { 95, 268, }, + { 96, 267, }, + { 98, 266, }, + { 100, 265, }, + { 102, 264, }, + { 104, 263, }, + { 105, 262, }, + { 106, 261, }, + { 110, 260, }, + { 255, 0, }, +}; + +/* 8 bit registers, 16 bit values */ +static int s5h1409_writereg(struct s5h1409_state *state, u8 reg, u16 data) +{ + int ret; + u8 buf[] = { reg, data >> 8, data & 0xff }; + + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = 0, .buf = buf, .len = 3 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static u16 s5h1409_readreg(struct s5h1409_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0, 0 }; + + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 2 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk("%s: readreg error (ret == %i)\n", __func__, ret); + return (b1[0] << 8) | b1[1]; +} + +static int s5h1409_softreset(struct dvb_frontend *fe) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + s5h1409_writereg(state, 0xf5, 0); + s5h1409_writereg(state, 0xf5, 1); + state->is_qam_locked = 0; + state->qam_state = QAM_STATE_UNTUNED; + return 0; +} + +#define S5H1409_VSB_IF_FREQ 5380 +#define S5H1409_QAM_IF_FREQ (state->config->qam_if) + +static int s5h1409_set_if_freq(struct dvb_frontend *fe, int KHz) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s(%d KHz)\n", __func__, KHz); + + switch (KHz) { + case 4000: + s5h1409_writereg(state, 0x87, 0x014b); + s5h1409_writereg(state, 0x88, 0x0cb5); + s5h1409_writereg(state, 0x89, 0x03e2); + break; + case 5380: + case 44000: + default: + s5h1409_writereg(state, 0x87, 0x01be); + s5h1409_writereg(state, 0x88, 0x0436); + s5h1409_writereg(state, 0x89, 0x054d); + break; + } + state->if_freq = KHz; + + return 0; +} + +static int s5h1409_set_spectralinversion(struct dvb_frontend *fe, int inverted) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, inverted); + + if (inverted == 1) + return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */ + else + return s5h1409_writereg(state, 0x1b, 0x0110); /* Normal */ +} + +static int s5h1409_enable_modulation(struct dvb_frontend *fe, + fe_modulation_t m) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s(0x%08x)\n", __func__, m); + + switch (m) { + case VSB_8: + dprintk("%s() VSB_8\n", __func__); + if (state->if_freq != S5H1409_VSB_IF_FREQ) + s5h1409_set_if_freq(fe, S5H1409_VSB_IF_FREQ); + s5h1409_writereg(state, 0xf4, 0); + break; + case QAM_64: + case QAM_256: + case QAM_AUTO: + dprintk("%s() QAM_AUTO (64/256)\n", __func__); + if (state->if_freq != S5H1409_QAM_IF_FREQ) + s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ); + s5h1409_writereg(state, 0xf4, 1); + s5h1409_writereg(state, 0x85, 0x110); + break; + default: + dprintk("%s() Invalid modulation\n", __func__); + return -EINVAL; + } + + state->current_modulation = m; + s5h1409_softreset(fe); + + return 0; +} + +static int s5h1409_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + return s5h1409_writereg(state, 0xf3, 1); + else + return s5h1409_writereg(state, 0xf3, 0); +} + +static int s5h1409_set_gpio(struct dvb_frontend *fe, int enable) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + return s5h1409_writereg(state, 0xe3, + s5h1409_readreg(state, 0xe3) | 0x1100); + else + return s5h1409_writereg(state, 0xe3, + s5h1409_readreg(state, 0xe3) & 0xfeff); +} + +static int s5h1409_sleep(struct dvb_frontend *fe, int enable) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + return s5h1409_writereg(state, 0xf2, enable); +} + +static int s5h1409_register_reset(struct dvb_frontend *fe) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + return s5h1409_writereg(state, 0xfa, 0); +} + +static void s5h1409_set_qam_amhum_mode(struct dvb_frontend *fe) +{ + struct s5h1409_state *state = fe->demodulator_priv; + u16 reg; + + if (state->qam_state < QAM_STATE_INTERLEAVE_SET) { + /* We should not perform amhum optimization until + the interleave mode has been configured */ + return; + } + + if (state->qam_state == QAM_STATE_QAM_OPTIMIZED_L3) { + /* We've already reached the maximum optimization level, so + dont bother banging on the status registers */ + return; + } + + /* QAM EQ lock check */ + reg = s5h1409_readreg(state, 0xf0); + + if ((reg >> 13) & 0x1) { + reg &= 0xff; + + s5h1409_writereg(state, 0x96, 0x000c); + if (reg < 0x68) { + if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L3) { + dprintk("%s() setting QAM state to OPT_L3\n", + __func__); + s5h1409_writereg(state, 0x93, 0x3130); + s5h1409_writereg(state, 0x9e, 0x2836); + state->qam_state = QAM_STATE_QAM_OPTIMIZED_L3; + } + } else { + if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L2) { + dprintk("%s() setting QAM state to OPT_L2\n", + __func__); + s5h1409_writereg(state, 0x93, 0x3332); + s5h1409_writereg(state, 0x9e, 0x2c37); + state->qam_state = QAM_STATE_QAM_OPTIMIZED_L2; + } + } + + } else { + if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L1) { + dprintk("%s() setting QAM state to OPT_L1\n", __func__); + s5h1409_writereg(state, 0x96, 0x0008); + s5h1409_writereg(state, 0x93, 0x3332); + s5h1409_writereg(state, 0x9e, 0x2c37); + state->qam_state = QAM_STATE_QAM_OPTIMIZED_L1; + } + } +} + +static void s5h1409_set_qam_amhum_mode_legacy(struct dvb_frontend *fe) +{ + struct s5h1409_state *state = fe->demodulator_priv; + u16 reg; + + if (state->is_qam_locked) + return; + + /* QAM EQ lock check */ + reg = s5h1409_readreg(state, 0xf0); + + if ((reg >> 13) & 0x1) { + + state->is_qam_locked = 1; + reg &= 0xff; + + s5h1409_writereg(state, 0x96, 0x00c); + if ((reg < 0x38) || (reg > 0x68)) { + s5h1409_writereg(state, 0x93, 0x3332); + s5h1409_writereg(state, 0x9e, 0x2c37); + } else { + s5h1409_writereg(state, 0x93, 0x3130); + s5h1409_writereg(state, 0x9e, 0x2836); + } + + } else { + s5h1409_writereg(state, 0x96, 0x0008); + s5h1409_writereg(state, 0x93, 0x3332); + s5h1409_writereg(state, 0x9e, 0x2c37); + } +} + +static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe) +{ + struct s5h1409_state *state = fe->demodulator_priv; + u16 reg, reg1, reg2; + + if (state->qam_state >= QAM_STATE_INTERLEAVE_SET) { + /* We've done the optimization already */ + return; + } + + reg = s5h1409_readreg(state, 0xf1); + + /* Master lock */ + if ((reg >> 15) & 0x1) { + if (state->qam_state == QAM_STATE_UNTUNED || + state->qam_state == QAM_STATE_TUNING_STARTED) { + dprintk("%s() setting QAM state to INTERLEAVE_SET\n", + __func__); + reg1 = s5h1409_readreg(state, 0xb2); + reg2 = s5h1409_readreg(state, 0xad); + + s5h1409_writereg(state, 0x96, 0x0020); + s5h1409_writereg(state, 0xad, + (((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff))); + state->qam_state = QAM_STATE_INTERLEAVE_SET; + } + } else { + if (state->qam_state == QAM_STATE_UNTUNED) { + dprintk("%s() setting QAM state to TUNING_STARTED\n", + __func__); + s5h1409_writereg(state, 0x96, 0x08); + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) | 0x1001); + state->qam_state = QAM_STATE_TUNING_STARTED; + } + } +} + +static void s5h1409_set_qam_interleave_mode_legacy(struct dvb_frontend *fe) +{ + struct s5h1409_state *state = fe->demodulator_priv; + u16 reg, reg1, reg2; + + reg = s5h1409_readreg(state, 0xf1); + + /* Master lock */ + if ((reg >> 15) & 0x1) { + if (state->qam_state != 2) { + state->qam_state = 2; + reg1 = s5h1409_readreg(state, 0xb2); + reg2 = s5h1409_readreg(state, 0xad); + + s5h1409_writereg(state, 0x96, 0x20); + s5h1409_writereg(state, 0xad, + (((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff))); + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) & 0xeffe); + } + } else { + if (state->qam_state != 1) { + state->qam_state = 1; + s5h1409_writereg(state, 0x96, 0x08); + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) | 0x1001); + } + } +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int s5h1409_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s5h1409_state *state = fe->demodulator_priv; + + dprintk("%s(frequency=%d)\n", __func__, p->frequency); + + s5h1409_softreset(fe); + + state->current_frequency = p->frequency; + + s5h1409_enable_modulation(fe, p->modulation); + + if (fe->ops.tuner_ops.set_params) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* Issue a reset to the demod so it knows to resync against the + newly tuned frequency */ + s5h1409_softreset(fe); + + /* Optimize the demod for QAM */ + if (state->current_modulation != VSB_8) { + /* This almost certainly applies to all boards, but for now + only do it for the HVR-1600. Once the other boards are + tested, the "legacy" versions can just go away */ + if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) { + s5h1409_set_qam_interleave_mode(fe); + s5h1409_set_qam_amhum_mode(fe); + } else { + s5h1409_set_qam_amhum_mode_legacy(fe); + s5h1409_set_qam_interleave_mode_legacy(fe); + } + } + + return 0; +} + +static int s5h1409_set_mpeg_timing(struct dvb_frontend *fe, int mode) +{ + struct s5h1409_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, mode); + + val = s5h1409_readreg(state, 0xac) & 0xcfff; + switch (mode) { + case S5H1409_MPEGTIMING_CONTINOUS_INVERTING_CLOCK: + val |= 0x0000; + break; + case S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK: + dprintk("%s(%d) Mode1 or Defaulting\n", __func__, mode); + val |= 0x1000; + break; + case S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK: + val |= 0x2000; + break; + case S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK: + val |= 0x3000; + break; + default: + return -EINVAL; + } + + /* Configure MPEG Signal Timing charactistics */ + return s5h1409_writereg(state, 0xac, val); +} + +/* Reset the demod hardware and reset all of the configuration registers + to a default state. */ +static int s5h1409_init(struct dvb_frontend *fe) +{ + int i; + + struct s5h1409_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + + s5h1409_sleep(fe, 0); + s5h1409_register_reset(fe); + + for (i = 0; i < ARRAY_SIZE(init_tab); i++) + s5h1409_writereg(state, init_tab[i].reg, init_tab[i].data); + + /* The datasheet says that after initialisation, VSB is default */ + state->current_modulation = VSB_8; + + /* Optimize for the HVR-1600 if appropriate. Note that some of these + may get folded into the generic case after testing with other + devices */ + if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) { + /* VSB AGC REF */ + s5h1409_writereg(state, 0x09, 0x0050); + + /* Unknown but Windows driver does it... */ + s5h1409_writereg(state, 0x21, 0x0001); + s5h1409_writereg(state, 0x50, 0x030e); + + /* QAM AGC REF */ + s5h1409_writereg(state, 0x82, 0x0800); + } + + if (state->config->output_mode == S5H1409_SERIAL_OUTPUT) + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) | 0x100); /* Serial */ + else + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) & 0xfeff); /* Parallel */ + + s5h1409_set_spectralinversion(fe, state->config->inversion); + s5h1409_set_if_freq(fe, state->if_freq); + s5h1409_set_gpio(fe, state->config->gpio); + s5h1409_set_mpeg_timing(fe, state->config->mpeg_timing); + s5h1409_softreset(fe); + + /* Note: Leaving the I2C gate closed. */ + s5h1409_i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int s5h1409_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct s5h1409_state *state = fe->demodulator_priv; + u16 reg; + u32 tuner_status = 0; + + *status = 0; + + /* Optimize the demod for QAM */ + if (state->current_modulation != VSB_8) { + /* This almost certainly applies to all boards, but for now + only do it for the HVR-1600. Once the other boards are + tested, the "legacy" versions can just go away */ + if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) { + s5h1409_set_qam_interleave_mode(fe); + s5h1409_set_qam_amhum_mode(fe); + } + } + + /* Get the demodulator status */ + reg = s5h1409_readreg(state, 0xf1); + if (reg & 0x1000) + *status |= FE_HAS_VITERBI; + if (reg & 0x8000) + *status |= FE_HAS_LOCK | FE_HAS_SYNC; + + switch (state->config->status_mode) { + case S5H1409_DEMODLOCKING: + if (*status & FE_HAS_VITERBI) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + case S5H1409_TUNERLOCKING: + /* Get the tuner status */ + if (fe->ops.tuner_ops.get_status) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.get_status(fe, &tuner_status); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + if (tuner_status) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + } + + dprintk("%s() status 0x%08x\n", __func__, *status); + + return 0; +} + +static int s5h1409_qam256_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(qam256_snr_tab); i++) { + if (v < qam256_snr_tab[i].val) { + *snr = qam256_snr_tab[i].data; + ret = 0; + break; + } + } + return ret; +} + +static int s5h1409_qam64_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(qam64_snr_tab); i++) { + if (v < qam64_snr_tab[i].val) { + *snr = qam64_snr_tab[i].data; + ret = 0; + break; + } + } + return ret; +} + +static int s5h1409_vsb_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(vsb_snr_tab); i++) { + if (v > vsb_snr_tab[i].val) { + *snr = vsb_snr_tab[i].data; + ret = 0; + break; + } + } + dprintk("%s() snr=%d\n", __func__, *snr); + return ret; +} + +static int s5h1409_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct s5h1409_state *state = fe->demodulator_priv; + u16 reg; + dprintk("%s()\n", __func__); + + switch (state->current_modulation) { + case QAM_64: + reg = s5h1409_readreg(state, 0xf0) & 0xff; + return s5h1409_qam64_lookup_snr(fe, snr, reg); + case QAM_256: + reg = s5h1409_readreg(state, 0xf0) & 0xff; + return s5h1409_qam256_lookup_snr(fe, snr, reg); + case VSB_8: + reg = s5h1409_readreg(state, 0xf1) & 0x3ff; + return s5h1409_vsb_lookup_snr(fe, snr, reg); + default: + break; + } + + return -EINVAL; +} + +static int s5h1409_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + /* borrowed from lgdt330x.c + * + * Calculate strength from SNR up to 35dB + * Even though the SNR can go higher than 35dB, + * there is some comfort factor in having a range of + * strong signals that can show at 100% + */ + u16 snr; + u32 tmp; + int ret = s5h1409_read_snr(fe, &snr); + + *signal_strength = 0; + + if (0 == ret) { + /* The following calculation method was chosen + * purely for the sake of code re-use from the + * other demod drivers that use this method */ + + /* Convert from SNR in dB * 10 to 8.24 fixed-point */ + tmp = (snr * ((1 << 24) / 10)); + + /* Convert from 8.24 fixed-point to + * scale the range 0 - 35*2^24 into 0 - 65535*/ + if (tmp >= 8960 * 0x10000) + *signal_strength = 0xffff; + else + *signal_strength = tmp / 8960; + } + + return ret; +} + +static int s5h1409_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct s5h1409_state *state = fe->demodulator_priv; + + *ucblocks = s5h1409_readreg(state, 0xb5); + + return 0; +} + +static int s5h1409_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return s5h1409_read_ucblocks(fe, ber); +} + +static int s5h1409_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s5h1409_state *state = fe->demodulator_priv; + + p->frequency = state->current_frequency; + p->modulation = state->current_modulation; + + return 0; +} + +static int s5h1409_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void s5h1409_release(struct dvb_frontend *fe) +{ + struct s5h1409_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops s5h1409_ops; + +struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config, + struct i2c_adapter *i2c) +{ + struct s5h1409_state *state = NULL; + u16 reg; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->current_modulation = 0; + state->if_freq = S5H1409_VSB_IF_FREQ; + + /* check if the demod exists */ + reg = s5h1409_readreg(state, 0x04); + if ((reg != 0x0066) && (reg != 0x007f)) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &s5h1409_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + if (s5h1409_init(&state->frontend) != 0) { + printk(KERN_ERR "%s: Failed to initialize correctly\n", + __func__); + goto error; + } + + /* Note: Leaving the I2C gate open here. */ + s5h1409_i2c_gate_ctrl(&state->frontend, 1); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(s5h1409_attach); + +static struct dvb_frontend_ops s5h1409_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "Samsung S5H1409 QAM/8VSB Frontend", + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + + .init = s5h1409_init, + .i2c_gate_ctrl = s5h1409_i2c_gate_ctrl, + .set_frontend = s5h1409_set_frontend, + .get_frontend = s5h1409_get_frontend, + .get_tune_settings = s5h1409_get_tune_settings, + .read_status = s5h1409_read_status, + .read_ber = s5h1409_read_ber, + .read_signal_strength = s5h1409_read_signal_strength, + .read_snr = s5h1409_read_snr, + .read_ucblocks = s5h1409_read_ucblocks, + .release = s5h1409_release, +}; + +MODULE_DESCRIPTION("Samsung S5H1409 QAM-B/ATSC Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); + + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/dvb-frontends/s5h1409.h b/drivers/media/dvb-frontends/s5h1409.h new file mode 100644 index 00000000..63b1e0a3 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1409.h @@ -0,0 +1,88 @@ +/* + Samsung S5H1409 VSB/QAM demodulator driver + + Copyright (C) 2006 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef __S5H1409_H__ +#define __S5H1409_H__ + +#include +#include + +struct s5h1409_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* serial/parallel output */ +#define S5H1409_PARALLEL_OUTPUT 0 +#define S5H1409_SERIAL_OUTPUT 1 + u8 output_mode; + + /* GPIO Setting */ +#define S5H1409_GPIO_OFF 0 +#define S5H1409_GPIO_ON 1 + u8 gpio; + + /* IF Freq for QAM in KHz, VSB is hardcoded to 5380 */ + u16 qam_if; + + /* Spectral Inversion */ +#define S5H1409_INVERSION_OFF 0 +#define S5H1409_INVERSION_ON 1 + u8 inversion; + + /* Return lock status based on tuner lock, or demod lock */ +#define S5H1409_TUNERLOCKING 0 +#define S5H1409_DEMODLOCKING 1 + u8 status_mode; + + /* MPEG signal timing */ +#define S5H1409_MPEGTIMING_CONTINOUS_INVERTING_CLOCK 0 +#define S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK 1 +#define S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK 2 +#define S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3 + u16 mpeg_timing; + + /* HVR-1600 optimizations (to better work with MXL5005s) + Note: some of these are likely to be folded into the generic driver + after being regression tested with other boards */ +#define S5H1409_HVR1600_NOOPTIMIZE 0 +#define S5H1409_HVR1600_OPTIMIZE 1 + u8 hvr1600_opt; +}; + +#if IS_ENABLED(CONFIG_DVB_S5H1409) +extern struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *s5h1409_attach( + const struct s5h1409_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_S5H1409 */ + +#endif /* __S5H1409_H__ */ + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/dvb-frontends/s5h1411.c b/drivers/media/dvb-frontends/s5h1411.c new file mode 100644 index 00000000..6cc4b7a9 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1411.c @@ -0,0 +1,951 @@ +/* + Samsung S5H1411 VSB/QAM demodulator driver + + Copyright (C) 2008 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "s5h1411.h" + +struct s5h1411_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct s5h1411_config *config; + + struct dvb_frontend frontend; + + fe_modulation_t current_modulation; + unsigned int first_tune:1; + + u32 current_frequency; + int if_freq; + + u8 inversion; +}; + +static int debug; + +#define dprintk(arg...) do { \ + if (debug) \ + printk(arg); \ + } while (0) + +/* Register values to initialise the demod, defaults to VSB */ +static struct init_tab { + u8 addr; + u8 reg; + u16 data; +} init_tab[] = { + { S5H1411_I2C_TOP_ADDR, 0x00, 0x0071, }, + { S5H1411_I2C_TOP_ADDR, 0x08, 0x0047, }, + { S5H1411_I2C_TOP_ADDR, 0x1c, 0x0400, }, + { S5H1411_I2C_TOP_ADDR, 0x1e, 0x0370, }, + { S5H1411_I2C_TOP_ADDR, 0x1f, 0x342c, }, + { S5H1411_I2C_TOP_ADDR, 0x24, 0x0231, }, + { S5H1411_I2C_TOP_ADDR, 0x25, 0x1011, }, + { S5H1411_I2C_TOP_ADDR, 0x26, 0x0f07, }, + { S5H1411_I2C_TOP_ADDR, 0x27, 0x0f04, }, + { S5H1411_I2C_TOP_ADDR, 0x28, 0x070f, }, + { S5H1411_I2C_TOP_ADDR, 0x29, 0x2820, }, + { S5H1411_I2C_TOP_ADDR, 0x2a, 0x102e, }, + { S5H1411_I2C_TOP_ADDR, 0x2b, 0x0220, }, + { S5H1411_I2C_TOP_ADDR, 0x2e, 0x0d0e, }, + { S5H1411_I2C_TOP_ADDR, 0x2f, 0x1013, }, + { S5H1411_I2C_TOP_ADDR, 0x31, 0x171b, }, + { S5H1411_I2C_TOP_ADDR, 0x32, 0x0e0f, }, + { S5H1411_I2C_TOP_ADDR, 0x33, 0x0f10, }, + { S5H1411_I2C_TOP_ADDR, 0x34, 0x170e, }, + { S5H1411_I2C_TOP_ADDR, 0x35, 0x4b10, }, + { S5H1411_I2C_TOP_ADDR, 0x36, 0x0f17, }, + { S5H1411_I2C_TOP_ADDR, 0x3c, 0x1577, }, + { S5H1411_I2C_TOP_ADDR, 0x3d, 0x081a, }, + { S5H1411_I2C_TOP_ADDR, 0x3e, 0x77ee, }, + { S5H1411_I2C_TOP_ADDR, 0x40, 0x1e09, }, + { S5H1411_I2C_TOP_ADDR, 0x41, 0x0f0c, }, + { S5H1411_I2C_TOP_ADDR, 0x42, 0x1f10, }, + { S5H1411_I2C_TOP_ADDR, 0x4d, 0x0509, }, + { S5H1411_I2C_TOP_ADDR, 0x4e, 0x0a00, }, + { S5H1411_I2C_TOP_ADDR, 0x50, 0x0000, }, + { S5H1411_I2C_TOP_ADDR, 0x5b, 0x0000, }, + { S5H1411_I2C_TOP_ADDR, 0x5c, 0x0008, }, + { S5H1411_I2C_TOP_ADDR, 0x57, 0x1101, }, + { S5H1411_I2C_TOP_ADDR, 0x65, 0x007c, }, + { S5H1411_I2C_TOP_ADDR, 0x68, 0x0512, }, + { S5H1411_I2C_TOP_ADDR, 0x69, 0x0258, }, + { S5H1411_I2C_TOP_ADDR, 0x70, 0x0004, }, + { S5H1411_I2C_TOP_ADDR, 0x71, 0x0007, }, + { S5H1411_I2C_TOP_ADDR, 0x76, 0x00a9, }, + { S5H1411_I2C_TOP_ADDR, 0x78, 0x3141, }, + { S5H1411_I2C_TOP_ADDR, 0x7a, 0x3141, }, + { S5H1411_I2C_TOP_ADDR, 0xb3, 0x8003, }, + { S5H1411_I2C_TOP_ADDR, 0xb5, 0xa6bb, }, + { S5H1411_I2C_TOP_ADDR, 0xb6, 0x0609, }, + { S5H1411_I2C_TOP_ADDR, 0xb7, 0x2f06, }, + { S5H1411_I2C_TOP_ADDR, 0xb8, 0x003f, }, + { S5H1411_I2C_TOP_ADDR, 0xb9, 0x2700, }, + { S5H1411_I2C_TOP_ADDR, 0xba, 0xfac8, }, + { S5H1411_I2C_TOP_ADDR, 0xbe, 0x1003, }, + { S5H1411_I2C_TOP_ADDR, 0xbf, 0x103f, }, + { S5H1411_I2C_TOP_ADDR, 0xce, 0x2000, }, + { S5H1411_I2C_TOP_ADDR, 0xcf, 0x0800, }, + { S5H1411_I2C_TOP_ADDR, 0xd0, 0x0800, }, + { S5H1411_I2C_TOP_ADDR, 0xd1, 0x0400, }, + { S5H1411_I2C_TOP_ADDR, 0xd2, 0x0800, }, + { S5H1411_I2C_TOP_ADDR, 0xd3, 0x2000, }, + { S5H1411_I2C_TOP_ADDR, 0xd4, 0x3000, }, + { S5H1411_I2C_TOP_ADDR, 0xdb, 0x4a9b, }, + { S5H1411_I2C_TOP_ADDR, 0xdc, 0x1000, }, + { S5H1411_I2C_TOP_ADDR, 0xde, 0x0001, }, + { S5H1411_I2C_TOP_ADDR, 0xdf, 0x0000, }, + { S5H1411_I2C_TOP_ADDR, 0xe3, 0x0301, }, + { S5H1411_I2C_QAM_ADDR, 0xf3, 0x0000, }, + { S5H1411_I2C_QAM_ADDR, 0xf3, 0x0001, }, + { S5H1411_I2C_QAM_ADDR, 0x08, 0x0600, }, + { S5H1411_I2C_QAM_ADDR, 0x18, 0x4201, }, + { S5H1411_I2C_QAM_ADDR, 0x1e, 0x6476, }, + { S5H1411_I2C_QAM_ADDR, 0x21, 0x0830, }, + { S5H1411_I2C_QAM_ADDR, 0x0c, 0x5679, }, + { S5H1411_I2C_QAM_ADDR, 0x0d, 0x579b, }, + { S5H1411_I2C_QAM_ADDR, 0x24, 0x0102, }, + { S5H1411_I2C_QAM_ADDR, 0x31, 0x7488, }, + { S5H1411_I2C_QAM_ADDR, 0x32, 0x0a08, }, + { S5H1411_I2C_QAM_ADDR, 0x3d, 0x8689, }, + { S5H1411_I2C_QAM_ADDR, 0x49, 0x0048, }, + { S5H1411_I2C_QAM_ADDR, 0x57, 0x2012, }, + { S5H1411_I2C_QAM_ADDR, 0x5d, 0x7676, }, + { S5H1411_I2C_QAM_ADDR, 0x04, 0x0400, }, + { S5H1411_I2C_QAM_ADDR, 0x58, 0x00c0, }, + { S5H1411_I2C_QAM_ADDR, 0x5b, 0x0100, }, +}; + +/* VSB SNR lookup table */ +static struct vsb_snr_tab { + u16 val; + u16 data; +} vsb_snr_tab[] = { + { 0x39f, 300, }, + { 0x39b, 295, }, + { 0x397, 290, }, + { 0x394, 285, }, + { 0x38f, 280, }, + { 0x38b, 275, }, + { 0x387, 270, }, + { 0x382, 265, }, + { 0x37d, 260, }, + { 0x377, 255, }, + { 0x370, 250, }, + { 0x36a, 245, }, + { 0x364, 240, }, + { 0x35b, 235, }, + { 0x353, 230, }, + { 0x349, 225, }, + { 0x340, 320, }, + { 0x337, 215, }, + { 0x327, 210, }, + { 0x31b, 205, }, + { 0x310, 200, }, + { 0x302, 195, }, + { 0x2f3, 190, }, + { 0x2e4, 185, }, + { 0x2d7, 180, }, + { 0x2cd, 175, }, + { 0x2bb, 170, }, + { 0x2a9, 165, }, + { 0x29e, 160, }, + { 0x284, 155, }, + { 0x27a, 150, }, + { 0x260, 145, }, + { 0x23a, 140, }, + { 0x224, 135, }, + { 0x213, 130, }, + { 0x204, 125, }, + { 0x1fe, 120, }, + { 0, 0, }, +}; + +/* QAM64 SNR lookup table */ +static struct qam64_snr_tab { + u16 val; + u16 data; +} qam64_snr_tab[] = { + { 0x0001, 0, }, + { 0x0af0, 300, }, + { 0x0d80, 290, }, + { 0x10a0, 280, }, + { 0x14b5, 270, }, + { 0x1590, 268, }, + { 0x1680, 266, }, + { 0x17b0, 264, }, + { 0x18c0, 262, }, + { 0x19b0, 260, }, + { 0x1ad0, 258, }, + { 0x1d00, 256, }, + { 0x1da0, 254, }, + { 0x1ef0, 252, }, + { 0x2050, 250, }, + { 0x20f0, 249, }, + { 0x21d0, 248, }, + { 0x22b0, 247, }, + { 0x23a0, 246, }, + { 0x2470, 245, }, + { 0x24f0, 244, }, + { 0x25a0, 243, }, + { 0x26c0, 242, }, + { 0x27b0, 241, }, + { 0x28d0, 240, }, + { 0x29b0, 239, }, + { 0x2ad0, 238, }, + { 0x2ba0, 237, }, + { 0x2c80, 236, }, + { 0x2d20, 235, }, + { 0x2e00, 234, }, + { 0x2f10, 233, }, + { 0x3050, 232, }, + { 0x3190, 231, }, + { 0x3300, 230, }, + { 0x3340, 229, }, + { 0x3200, 228, }, + { 0x3550, 227, }, + { 0x3610, 226, }, + { 0x3600, 225, }, + { 0x3700, 224, }, + { 0x3800, 223, }, + { 0x3920, 222, }, + { 0x3a20, 221, }, + { 0x3b30, 220, }, + { 0x3d00, 219, }, + { 0x3e00, 218, }, + { 0x4000, 217, }, + { 0x4100, 216, }, + { 0x4300, 215, }, + { 0x4400, 214, }, + { 0x4600, 213, }, + { 0x4700, 212, }, + { 0x4800, 211, }, + { 0x4a00, 210, }, + { 0x4b00, 209, }, + { 0x4d00, 208, }, + { 0x4f00, 207, }, + { 0x5050, 206, }, + { 0x5200, 205, }, + { 0x53c0, 204, }, + { 0x5450, 203, }, + { 0x5650, 202, }, + { 0x5820, 201, }, + { 0x6000, 200, }, + { 0xffff, 0, }, +}; + +/* QAM256 SNR lookup table */ +static struct qam256_snr_tab { + u16 val; + u16 data; +} qam256_snr_tab[] = { + { 0x0001, 0, }, + { 0x0970, 400, }, + { 0x0a90, 390, }, + { 0x0b90, 380, }, + { 0x0d90, 370, }, + { 0x0ff0, 360, }, + { 0x1240, 350, }, + { 0x1345, 348, }, + { 0x13c0, 346, }, + { 0x14c0, 344, }, + { 0x1500, 342, }, + { 0x1610, 340, }, + { 0x1700, 338, }, + { 0x1800, 336, }, + { 0x18b0, 334, }, + { 0x1900, 332, }, + { 0x1ab0, 330, }, + { 0x1bc0, 328, }, + { 0x1cb0, 326, }, + { 0x1db0, 324, }, + { 0x1eb0, 322, }, + { 0x2030, 320, }, + { 0x2200, 318, }, + { 0x2280, 316, }, + { 0x2410, 314, }, + { 0x25b0, 312, }, + { 0x27a0, 310, }, + { 0x2840, 308, }, + { 0x29d0, 306, }, + { 0x2b10, 304, }, + { 0x2d30, 302, }, + { 0x2f20, 300, }, + { 0x30c0, 298, }, + { 0x3260, 297, }, + { 0x32c0, 296, }, + { 0x3300, 295, }, + { 0x33b0, 294, }, + { 0x34b0, 293, }, + { 0x35a0, 292, }, + { 0x3650, 291, }, + { 0x3800, 290, }, + { 0x3900, 289, }, + { 0x3a50, 288, }, + { 0x3b30, 287, }, + { 0x3cb0, 286, }, + { 0x3e20, 285, }, + { 0x3fa0, 284, }, + { 0x40a0, 283, }, + { 0x41c0, 282, }, + { 0x42f0, 281, }, + { 0x44a0, 280, }, + { 0x4600, 279, }, + { 0x47b0, 278, }, + { 0x4900, 277, }, + { 0x4a00, 276, }, + { 0x4ba0, 275, }, + { 0x4d00, 274, }, + { 0x4f00, 273, }, + { 0x5000, 272, }, + { 0x51f0, 272, }, + { 0x53a0, 270, }, + { 0x5520, 269, }, + { 0x5700, 268, }, + { 0x5800, 267, }, + { 0x5a00, 266, }, + { 0x5c00, 265, }, + { 0x5d00, 264, }, + { 0x5f00, 263, }, + { 0x6000, 262, }, + { 0x6200, 261, }, + { 0x6400, 260, }, + { 0xffff, 0, }, +}; + +/* 8 bit registers, 16 bit values */ +static int s5h1411_writereg(struct s5h1411_state *state, + u8 addr, u8 reg, u16 data) +{ + int ret; + u8 buf[] = { reg, data >> 8, data & 0xff }; + + struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, " + "ret == %i)\n", __func__, addr, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static u16 s5h1411_readreg(struct s5h1411_state *state, u8 addr, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0, 0 }; + + struct i2c_msg msg[] = { + { .addr = addr, .flags = 0, .buf = b0, .len = 1 }, + { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + return (b1[0] << 8) | b1[1]; +} + +static int s5h1411_softreset(struct dvb_frontend *fe) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf7, 0); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf7, 1); + return 0; +} + +static int s5h1411_set_if_freq(struct dvb_frontend *fe, int KHz) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(%d KHz)\n", __func__, KHz); + + switch (KHz) { + case 3250: + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d5); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x5342); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x10d9); + break; + case 3500: + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x1225); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x1e96); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x1225); + break; + case 4000: + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x14bc); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0xb53e); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x14bd); + break; + default: + dprintk("%s(%d KHz) Invalid, defaulting to 5380\n", + __func__, KHz); + /* no break, need to continue */ + case 5380: + case 44000: + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x1be4); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x3655); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x1be4); + break; + } + + state->if_freq = KHz; + + return 0; +} + +static int s5h1411_set_mpeg_timing(struct dvb_frontend *fe, int mode) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, mode); + + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xbe) & 0xcfff; + switch (mode) { + case S5H1411_MPEGTIMING_CONTINOUS_INVERTING_CLOCK: + val |= 0x0000; + break; + case S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK: + dprintk("%s(%d) Mode1 or Defaulting\n", __func__, mode); + val |= 0x1000; + break; + case S5H1411_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK: + val |= 0x2000; + break; + case S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK: + val |= 0x3000; + break; + default: + return -EINVAL; + } + + /* Configure MPEG Signal Timing charactistics */ + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbe, val); +} + +static int s5h1411_set_spectralinversion(struct dvb_frontend *fe, int inversion) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, inversion); + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x24) & ~0x1000; + + if (inversion == 1) + val |= 0x1000; /* Inverted */ + + state->inversion = inversion; + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x24, val); +} + +static int s5h1411_set_serialmode(struct dvb_frontend *fe, int serial) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, serial); + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xbd) & ~0x100; + + if (serial == 1) + val |= 0x100; + + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, val); +} + +static int s5h1411_enable_modulation(struct dvb_frontend *fe, + fe_modulation_t m) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(0x%08x)\n", __func__, m); + + if ((state->first_tune == 0) && (m == state->current_modulation)) { + dprintk("%s() Already at desired modulation. Skipping...\n", + __func__); + return 0; + } + + switch (m) { + case VSB_8: + dprintk("%s() VSB_8\n", __func__); + s5h1411_set_if_freq(fe, state->config->vsb_if); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x71); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf6, 0x00); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xcd, 0xf1); + break; + case QAM_64: + case QAM_256: + case QAM_AUTO: + dprintk("%s() QAM_AUTO (64/256)\n", __func__); + s5h1411_set_if_freq(fe, state->config->qam_if); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf6, 0x0001); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x16, 0x1101); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xcd, 0x00f0); + break; + default: + dprintk("%s() Invalid modulation\n", __func__); + return -EINVAL; + } + + state->current_modulation = m; + state->first_tune = 0; + s5h1411_softreset(fe); + + return 0; +} + +static int s5h1411_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 1); + else + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 0); +} + +static int s5h1411_set_gpio(struct dvb_frontend *fe, int enable) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, enable); + + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xe0) & ~0x02; + + if (enable) + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0, + val | 0x02); + else + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0, val); +} + +static int s5h1411_set_powerstate(struct dvb_frontend *fe, int enable) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf4, 1); + else { + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf4, 0); + s5h1411_softreset(fe); + } + + return 0; +} + +static int s5h1411_sleep(struct dvb_frontend *fe) +{ + return s5h1411_set_powerstate(fe, 1); +} + +static int s5h1411_register_reset(struct dvb_frontend *fe) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf3, 0); +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int s5h1411_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(frequency=%d)\n", __func__, p->frequency); + + s5h1411_softreset(fe); + + state->current_frequency = p->frequency; + + s5h1411_enable_modulation(fe, p->modulation); + + if (fe->ops.tuner_ops.set_params) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.set_params(fe); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* Issue a reset to the demod so it knows to resync against the + newly tuned frequency */ + s5h1411_softreset(fe); + + return 0; +} + +/* Reset the demod hardware and reset all of the configuration registers + to a default state. */ +static int s5h1411_init(struct dvb_frontend *fe) +{ + struct s5h1411_state *state = fe->demodulator_priv; + int i; + + dprintk("%s()\n", __func__); + + s5h1411_set_powerstate(fe, 0); + s5h1411_register_reset(fe); + + for (i = 0; i < ARRAY_SIZE(init_tab); i++) + s5h1411_writereg(state, init_tab[i].addr, + init_tab[i].reg, + init_tab[i].data); + + /* The datasheet says that after initialisation, VSB is default */ + state->current_modulation = VSB_8; + + /* Although the datasheet says it's in VSB, empirical evidence + shows problems getting lock on the first tuning request. Make + sure we call enable_modulation the first time around */ + state->first_tune = 1; + + if (state->config->output_mode == S5H1411_SERIAL_OUTPUT) + /* Serial */ + s5h1411_set_serialmode(fe, 1); + else + /* Parallel */ + s5h1411_set_serialmode(fe, 0); + + s5h1411_set_spectralinversion(fe, state->config->inversion); + s5h1411_set_if_freq(fe, state->config->vsb_if); + s5h1411_set_gpio(fe, state->config->gpio); + s5h1411_set_mpeg_timing(fe, state->config->mpeg_timing); + s5h1411_softreset(fe); + + /* Note: Leaving the I2C gate closed. */ + s5h1411_i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int s5h1411_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 reg; + u32 tuner_status = 0; + + *status = 0; + + /* Register F2 bit 15 = Master Lock, removed */ + + switch (state->current_modulation) { + case QAM_64: + case QAM_256: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf0); + if (reg & 0x10) /* QAM FEC Lock */ + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + if (reg & 0x100) /* QAM EQ Lock */ + *status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL; + + break; + case VSB_8: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2); + if (reg & 0x1000) /* FEC Lock */ + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + if (reg & 0x2000) /* EQ Lock */ + *status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL; + + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x53); + if (reg & 0x1) /* AFC Lock */ + *status |= FE_HAS_SIGNAL; + + break; + default: + return -EINVAL; + } + + switch (state->config->status_mode) { + case S5H1411_DEMODLOCKING: + if (*status & FE_HAS_VITERBI) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + case S5H1411_TUNERLOCKING: + /* Get the tuner status */ + if (fe->ops.tuner_ops.get_status) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.get_status(fe, &tuner_status); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + if (tuner_status) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + } + + dprintk("%s() status 0x%08x\n", __func__, *status); + + return 0; +} + +static int s5h1411_qam256_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(qam256_snr_tab); i++) { + if (v < qam256_snr_tab[i].val) { + *snr = qam256_snr_tab[i].data; + ret = 0; + break; + } + } + return ret; +} + +static int s5h1411_qam64_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(qam64_snr_tab); i++) { + if (v < qam64_snr_tab[i].val) { + *snr = qam64_snr_tab[i].data; + ret = 0; + break; + } + } + return ret; +} + +static int s5h1411_vsb_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(vsb_snr_tab); i++) { + if (v > vsb_snr_tab[i].val) { + *snr = vsb_snr_tab[i].data; + ret = 0; + break; + } + } + dprintk("%s() snr=%d\n", __func__, *snr); + return ret; +} + +static int s5h1411_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 reg; + dprintk("%s()\n", __func__); + + switch (state->current_modulation) { + case QAM_64: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf1); + return s5h1411_qam64_lookup_snr(fe, snr, reg); + case QAM_256: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf1); + return s5h1411_qam256_lookup_snr(fe, snr, reg); + case VSB_8: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, + 0xf2) & 0x3ff; + return s5h1411_vsb_lookup_snr(fe, snr, reg); + default: + break; + } + + return -EINVAL; +} + +static int s5h1411_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + /* borrowed from lgdt330x.c + * + * Calculate strength from SNR up to 35dB + * Even though the SNR can go higher than 35dB, + * there is some comfort factor in having a range of + * strong signals that can show at 100% + */ + u16 snr; + u32 tmp; + int ret = s5h1411_read_snr(fe, &snr); + + *signal_strength = 0; + + if (0 == ret) { + /* The following calculation method was chosen + * purely for the sake of code re-use from the + * other demod drivers that use this method */ + + /* Convert from SNR in dB * 10 to 8.24 fixed-point */ + tmp = (snr * ((1 << 24) / 10)); + + /* Convert from 8.24 fixed-point to + * scale the range 0 - 35*2^24 into 0 - 65535*/ + if (tmp >= 8960 * 0x10000) + *signal_strength = 0xffff; + else + *signal_strength = tmp / 8960; + } + + return ret; +} + +static int s5h1411_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + *ucblocks = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xc9); + + return 0; +} + +static int s5h1411_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return s5h1411_read_ucblocks(fe, ber); +} + +static int s5h1411_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s5h1411_state *state = fe->demodulator_priv; + + p->frequency = state->current_frequency; + p->modulation = state->current_modulation; + + return 0; +} + +static int s5h1411_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void s5h1411_release(struct dvb_frontend *fe) +{ + struct s5h1411_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops s5h1411_ops; + +struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config, + struct i2c_adapter *i2c) +{ + struct s5h1411_state *state = NULL; + u16 reg; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct s5h1411_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->current_modulation = VSB_8; + state->inversion = state->config->inversion; + + /* check if the demod exists */ + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x05); + if (reg != 0x0066) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &s5h1411_ops, + sizeof(struct dvb_frontend_ops)); + + state->frontend.demodulator_priv = state; + + if (s5h1411_init(&state->frontend) != 0) { + printk(KERN_ERR "%s: Failed to initialize correctly\n", + __func__); + goto error; + } + + /* Note: Leaving the I2C gate open here. */ + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 1); + + /* Put the device into low-power mode until first use */ + s5h1411_set_powerstate(&state->frontend, 1); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(s5h1411_attach); + +static struct dvb_frontend_ops s5h1411_ops = { + .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, + .info = { + .name = "Samsung S5H1411 QAM/8VSB Frontend", + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + + .init = s5h1411_init, + .sleep = s5h1411_sleep, + .i2c_gate_ctrl = s5h1411_i2c_gate_ctrl, + .set_frontend = s5h1411_set_frontend, + .get_frontend = s5h1411_get_frontend, + .get_tune_settings = s5h1411_get_tune_settings, + .read_status = s5h1411_read_status, + .read_ber = s5h1411_read_ber, + .read_signal_strength = s5h1411_read_signal_strength, + .read_snr = s5h1411_read_snr, + .read_ucblocks = s5h1411_read_ucblocks, + .release = s5h1411_release, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Samsung S5H1411 QAM-B/ATSC Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/dvb-frontends/s5h1411.h b/drivers/media/dvb-frontends/s5h1411.h new file mode 100644 index 00000000..e4f56871 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1411.h @@ -0,0 +1,90 @@ +/* + Samsung S5H1411 VSB/QAM demodulator driver + + Copyright (C) 2008 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef __S5H1411_H__ +#define __S5H1411_H__ + +#include +#include + +#define S5H1411_I2C_TOP_ADDR (0x32 >> 1) +#define S5H1411_I2C_QAM_ADDR (0x34 >> 1) + +struct s5h1411_config { + + /* serial/parallel output */ +#define S5H1411_PARALLEL_OUTPUT 0 +#define S5H1411_SERIAL_OUTPUT 1 + u8 output_mode; + + /* GPIO Setting */ +#define S5H1411_GPIO_OFF 0 +#define S5H1411_GPIO_ON 1 + u8 gpio; + + /* MPEG signal timing */ +#define S5H1411_MPEGTIMING_CONTINOUS_INVERTING_CLOCK 0 +#define S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK 1 +#define S5H1411_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK 2 +#define S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3 + u16 mpeg_timing; + + /* IF Freq for QAM and VSB in KHz */ +#define S5H1411_IF_3250 3250 +#define S5H1411_IF_3500 3500 +#define S5H1411_IF_4000 4000 +#define S5H1411_IF_5380 5380 +#define S5H1411_IF_44000 44000 +#define S5H1411_VSB_IF_DEFAULT S5H1411_IF_44000 +#define S5H1411_QAM_IF_DEFAULT S5H1411_IF_44000 + u16 qam_if; + u16 vsb_if; + + /* Spectral Inversion */ +#define S5H1411_INVERSION_OFF 0 +#define S5H1411_INVERSION_ON 1 + u8 inversion; + + /* Return lock status based on tuner lock, or demod lock */ +#define S5H1411_TUNERLOCKING 0 +#define S5H1411_DEMODLOCKING 1 + u8 status_mode; +}; + +#if IS_ENABLED(CONFIG_DVB_S5H1411) +extern struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *s5h1411_attach( + const struct s5h1411_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_S5H1411 */ + +#endif /* __S5H1411_H__ */ + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/dvb-frontends/s5h1420.c b/drivers/media/dvb-frontends/s5h1420.c new file mode 100644 index 00000000..93eeaf71 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1420.c @@ -0,0 +1,967 @@ +/* + * Driver for + * Samsung S5H1420 and + * PnpNetwork PN1010 QPSK Demodulator + * + * Copyright (C) 2005 Andrew de Quincey + * Copyright (C) 2005-8 Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +#include "dvb_frontend.h" +#include "s5h1420.h" +#include "s5h1420_priv.h" + +#define TONE_FREQ 22000 + +struct s5h1420_state { + struct i2c_adapter* i2c; + const struct s5h1420_config* config; + + struct dvb_frontend frontend; + struct i2c_adapter tuner_i2c_adapter; + + u8 CON_1_val; + + u8 postlocked:1; + u32 fclk; + u32 tunedfreq; + fe_code_rate_t fec_inner; + u32 symbol_rate; + + /* FIXME: ugly workaround for flexcop's incapable i2c-controller + * it does not support repeated-start, workaround: write addr-1 + * and then read + */ + u8 shadow[256]; +}; + +static u32 s5h1420_getsymbolrate(struct s5h1420_state* state); +static int s5h1420_get_tune_settings(struct dvb_frontend* fe, + struct dvb_frontend_tune_settings* fesettings); + + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debugging"); + +#define dprintk(x...) do { \ + if (debug) \ + printk(KERN_DEBUG "S5H1420: " x); \ +} while (0) + +static u8 s5h1420_readreg(struct s5h1420_state *state, u8 reg) +{ + int ret; + u8 b[2]; + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = 2 }, + { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = 1 }, + }; + + b[0] = (reg - 1) & 0xff; + b[1] = state->shadow[(reg - 1) & 0xff]; + + if (state->config->repeated_start_workaround) { + ret = i2c_transfer(state->i2c, msg, 3); + if (ret != 3) + return ret; + } else { + ret = i2c_transfer(state->i2c, &msg[1], 1); + if (ret != 1) + return ret; + ret = i2c_transfer(state->i2c, &msg[2], 1); + if (ret != 1) + return ret; + } + + /* dprintk("rd(%02x): %02x %02x\n", state->config->demod_address, reg, b[0]); */ + + return b[0]; +} + +static int s5h1420_writereg (struct s5h1420_state* state, u8 reg, u8 data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + int err; + + /* dprintk("wr(%02x): %02x %02x\n", state->config->demod_address, reg, data); */ + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + dprintk("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + state->shadow[reg] = data; + + return 0; +} + +static int s5h1420_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + dprintk("enter %s\n", __func__); + + switch(voltage) { + case SEC_VOLTAGE_13: + s5h1420_writereg(state, 0x3c, + (s5h1420_readreg(state, 0x3c) & 0xfe) | 0x02); + break; + + case SEC_VOLTAGE_18: + s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) | 0x03); + break; + + case SEC_VOLTAGE_OFF: + s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) & 0xfd); + break; + } + + dprintk("leave %s\n", __func__); + return 0; +} + +static int s5h1420_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + dprintk("enter %s\n", __func__); + switch(tone) { + case SEC_TONE_ON: + s5h1420_writereg(state, 0x3b, + (s5h1420_readreg(state, 0x3b) & 0x74) | 0x08); + break; + + case SEC_TONE_OFF: + s5h1420_writereg(state, 0x3b, + (s5h1420_readreg(state, 0x3b) & 0x74) | 0x01); + break; + } + dprintk("leave %s\n", __func__); + + return 0; +} + +static int s5h1420_send_master_cmd (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd* cmd) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u8 val; + int i; + unsigned long timeout; + int result = 0; + + dprintk("enter %s\n", __func__); + if (cmd->msg_len > 8) + return -EINVAL; + + /* setup for DISEQC */ + val = s5h1420_readreg(state, 0x3b); + s5h1420_writereg(state, 0x3b, 0x02); + msleep(15); + + /* write the DISEQC command bytes */ + for(i=0; i< cmd->msg_len; i++) { + s5h1420_writereg(state, 0x3d + i, cmd->msg[i]); + } + + /* kick off transmission */ + s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | + ((cmd->msg_len-1) << 4) | 0x08); + + /* wait for transmission to complete */ + timeout = jiffies + ((100*HZ) / 1000); + while(time_before(jiffies, timeout)) { + if (!(s5h1420_readreg(state, 0x3b) & 0x08)) + break; + + msleep(5); + } + if (time_after(jiffies, timeout)) + result = -ETIMEDOUT; + + /* restore original settings */ + s5h1420_writereg(state, 0x3b, val); + msleep(15); + dprintk("leave %s\n", __func__); + return result; +} + +static int s5h1420_recv_slave_reply (struct dvb_frontend* fe, + struct dvb_diseqc_slave_reply* reply) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u8 val; + int i; + int length; + unsigned long timeout; + int result = 0; + + /* setup for DISEQC receive */ + val = s5h1420_readreg(state, 0x3b); + s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */ + msleep(15); + + /* wait for reception to complete */ + timeout = jiffies + ((reply->timeout*HZ) / 1000); + while(time_before(jiffies, timeout)) { + if (!(s5h1420_readreg(state, 0x3b) & 0x80)) /* FIXME: do we test DIS_RDY(0x08) or RCV_EN(0x80)? */ + break; + + msleep(5); + } + if (time_after(jiffies, timeout)) { + result = -ETIMEDOUT; + goto exit; + } + + /* check error flag - FIXME: not sure what this does - docs do not describe + * beyond "error flag for diseqc receive data :( */ + if (s5h1420_readreg(state, 0x49)) { + result = -EIO; + goto exit; + } + + /* check length */ + length = (s5h1420_readreg(state, 0x3b) & 0x70) >> 4; + if (length > sizeof(reply->msg)) { + result = -EOVERFLOW; + goto exit; + } + reply->msg_len = length; + + /* extract data */ + for(i=0; i< length; i++) { + reply->msg[i] = s5h1420_readreg(state, 0x3d + i); + } + +exit: + /* restore original settings */ + s5h1420_writereg(state, 0x3b, val); + msleep(15); + return result; +} + +static int s5h1420_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u8 val; + int result = 0; + unsigned long timeout; + + /* setup for tone burst */ + val = s5h1420_readreg(state, 0x3b); + s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x70) | 0x01); + + /* set value for B position if requested */ + if (minicmd == SEC_MINI_B) { + s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x04); + } + msleep(15); + + /* start transmission */ + s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x08); + + /* wait for transmission to complete */ + timeout = jiffies + ((100*HZ) / 1000); + while(time_before(jiffies, timeout)) { + if (!(s5h1420_readreg(state, 0x3b) & 0x08)) + break; + + msleep(5); + } + if (time_after(jiffies, timeout)) + result = -ETIMEDOUT; + + /* restore original settings */ + s5h1420_writereg(state, 0x3b, val); + msleep(15); + return result; +} + +static fe_status_t s5h1420_get_status_bits(struct s5h1420_state* state) +{ + u8 val; + fe_status_t status = 0; + + val = s5h1420_readreg(state, 0x14); + if (val & 0x02) + status |= FE_HAS_SIGNAL; + if (val & 0x01) + status |= FE_HAS_CARRIER; + val = s5h1420_readreg(state, 0x36); + if (val & 0x01) + status |= FE_HAS_VITERBI; + if (val & 0x20) + status |= FE_HAS_SYNC; + if (status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI|FE_HAS_SYNC)) + status |= FE_HAS_LOCK; + + return status; +} + +static int s5h1420_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u8 val; + + dprintk("enter %s\n", __func__); + + if (status == NULL) + return -EINVAL; + + /* determine lock state */ + *status = s5h1420_get_status_bits(state); + + /* fix for FEC 5/6 inversion issue - if it doesn't quite lock, invert + the inversion, wait a bit and check again */ + if (*status == (FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI)) { + val = s5h1420_readreg(state, Vit10); + if ((val & 0x07) == 0x03) { + if (val & 0x08) + s5h1420_writereg(state, Vit09, 0x13); + else + s5h1420_writereg(state, Vit09, 0x1b); + + /* wait a bit then update lock status */ + mdelay(200); + *status = s5h1420_get_status_bits(state); + } + } + + /* perform post lock setup */ + if ((*status & FE_HAS_LOCK) && !state->postlocked) { + + /* calculate the data rate */ + u32 tmp = s5h1420_getsymbolrate(state); + switch (s5h1420_readreg(state, Vit10) & 0x07) { + case 0: tmp = (tmp * 2 * 1) / 2; break; + case 1: tmp = (tmp * 2 * 2) / 3; break; + case 2: tmp = (tmp * 2 * 3) / 4; break; + case 3: tmp = (tmp * 2 * 5) / 6; break; + case 4: tmp = (tmp * 2 * 6) / 7; break; + case 5: tmp = (tmp * 2 * 7) / 8; break; + } + + if (tmp == 0) { + printk(KERN_ERR "s5h1420: avoided division by 0\n"); + tmp = 1; + } + tmp = state->fclk / tmp; + + + /* set the MPEG_CLK_INTL for the calculated data rate */ + if (tmp < 2) + val = 0x00; + else if (tmp < 5) + val = 0x01; + else if (tmp < 9) + val = 0x02; + else if (tmp < 13) + val = 0x03; + else if (tmp < 17) + val = 0x04; + else if (tmp < 25) + val = 0x05; + else if (tmp < 33) + val = 0x06; + else + val = 0x07; + dprintk("for MPEG_CLK_INTL %d %x\n", tmp, val); + + s5h1420_writereg(state, FEC01, 0x18); + s5h1420_writereg(state, FEC01, 0x10); + s5h1420_writereg(state, FEC01, val); + + /* Enable "MPEG_Out" */ + val = s5h1420_readreg(state, Mpeg02); + s5h1420_writereg(state, Mpeg02, val | (1 << 6)); + + /* kicker disable */ + val = s5h1420_readreg(state, QPSK01) & 0x7f; + s5h1420_writereg(state, QPSK01, val); + + /* DC freeze TODO it was never activated by default or it can stay activated */ + + if (s5h1420_getsymbolrate(state) >= 20000000) { + s5h1420_writereg(state, Loop04, 0x8a); + s5h1420_writereg(state, Loop05, 0x6a); + } else { + s5h1420_writereg(state, Loop04, 0x58); + s5h1420_writereg(state, Loop05, 0x27); + } + + /* post-lock processing has been done! */ + state->postlocked = 1; + } + + dprintk("leave %s\n", __func__); + + return 0; +} + +static int s5h1420_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + s5h1420_writereg(state, 0x46, 0x1d); + mdelay(25); + + *ber = (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47); + + return 0; +} + +static int s5h1420_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + u8 val = s5h1420_readreg(state, 0x15); + + *strength = (u16) ((val << 8) | val); + + return 0; +} + +static int s5h1420_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + s5h1420_writereg(state, 0x46, 0x1f); + mdelay(25); + + *ucblocks = (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47); + + return 0; +} + +static void s5h1420_reset(struct s5h1420_state* state) +{ + dprintk("%s\n", __func__); + s5h1420_writereg (state, 0x01, 0x08); + s5h1420_writereg (state, 0x01, 0x00); + udelay(10); +} + +static void s5h1420_setsymbolrate(struct s5h1420_state* state, + struct dtv_frontend_properties *p) +{ + u8 v; + u64 val; + + dprintk("enter %s\n", __func__); + + val = ((u64) p->symbol_rate / 1000ULL) * (1ULL<<24); + if (p->symbol_rate < 29000000) + val *= 2; + do_div(val, (state->fclk / 1000)); + + dprintk("symbol rate register: %06llx\n", (unsigned long long)val); + + v = s5h1420_readreg(state, Loop01); + s5h1420_writereg(state, Loop01, v & 0x7f); + s5h1420_writereg(state, Tnco01, val >> 16); + s5h1420_writereg(state, Tnco02, val >> 8); + s5h1420_writereg(state, Tnco03, val & 0xff); + s5h1420_writereg(state, Loop01, v | 0x80); + dprintk("leave %s\n", __func__); +} + +static u32 s5h1420_getsymbolrate(struct s5h1420_state* state) +{ + return state->symbol_rate; +} + +static void s5h1420_setfreqoffset(struct s5h1420_state* state, int freqoffset) +{ + int val; + u8 v; + + dprintk("enter %s\n", __func__); + + /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so + * divide fclk by 1000000 to get the correct value. */ + val = -(int) ((freqoffset * (1<<24)) / (state->fclk / 1000000)); + + dprintk("phase rotator/freqoffset: %d %06x\n", freqoffset, val); + + v = s5h1420_readreg(state, Loop01); + s5h1420_writereg(state, Loop01, v & 0xbf); + s5h1420_writereg(state, Pnco01, val >> 16); + s5h1420_writereg(state, Pnco02, val >> 8); + s5h1420_writereg(state, Pnco03, val & 0xff); + s5h1420_writereg(state, Loop01, v | 0x40); + dprintk("leave %s\n", __func__); +} + +static int s5h1420_getfreqoffset(struct s5h1420_state* state) +{ + int val; + + s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08); + val = s5h1420_readreg(state, 0x0e) << 16; + val |= s5h1420_readreg(state, 0x0f) << 8; + val |= s5h1420_readreg(state, 0x10); + s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7); + + if (val & 0x800000) + val |= 0xff000000; + + /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so + * divide fclk by 1000000 to get the correct value. */ + val = (((-val) * (state->fclk/1000000)) / (1<<24)); + + return val; +} + +static void s5h1420_setfec_inversion(struct s5h1420_state* state, + struct dtv_frontend_properties *p) +{ + u8 inversion = 0; + u8 vit08, vit09; + + dprintk("enter %s\n", __func__); + + if (p->inversion == INVERSION_OFF) + inversion = state->config->invert ? 0x08 : 0; + else if (p->inversion == INVERSION_ON) + inversion = state->config->invert ? 0 : 0x08; + + if ((p->fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) { + vit08 = 0x3f; + vit09 = 0; + } else { + switch (p->fec_inner) { + case FEC_1_2: + vit08 = 0x01; vit09 = 0x10; + break; + + case FEC_2_3: + vit08 = 0x02; vit09 = 0x11; + break; + + case FEC_3_4: + vit08 = 0x04; vit09 = 0x12; + break; + + case FEC_5_6: + vit08 = 0x08; vit09 = 0x13; + break; + + case FEC_6_7: + vit08 = 0x10; vit09 = 0x14; + break; + + case FEC_7_8: + vit08 = 0x20; vit09 = 0x15; + break; + + default: + return; + } + } + vit09 |= inversion; + dprintk("fec: %02x %02x\n", vit08, vit09); + s5h1420_writereg(state, Vit08, vit08); + s5h1420_writereg(state, Vit09, vit09); + dprintk("leave %s\n", __func__); +} + +static fe_code_rate_t s5h1420_getfec(struct s5h1420_state* state) +{ + switch(s5h1420_readreg(state, 0x32) & 0x07) { + case 0: + return FEC_1_2; + + case 1: + return FEC_2_3; + + case 2: + return FEC_3_4; + + case 3: + return FEC_5_6; + + case 4: + return FEC_6_7; + + case 5: + return FEC_7_8; + } + + return FEC_NONE; +} + +static fe_spectral_inversion_t s5h1420_getinversion(struct s5h1420_state* state) +{ + if (s5h1420_readreg(state, 0x32) & 0x08) + return INVERSION_ON; + + return INVERSION_OFF; +} + +static int s5h1420_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s5h1420_state* state = fe->demodulator_priv; + int frequency_delta; + struct dvb_frontend_tune_settings fesettings; + + dprintk("enter %s\n", __func__); + + /* check if we should do a fast-tune */ + s5h1420_get_tune_settings(fe, &fesettings); + frequency_delta = p->frequency - state->tunedfreq; + if ((frequency_delta > -fesettings.max_drift) && + (frequency_delta < fesettings.max_drift) && + (frequency_delta != 0) && + (state->fec_inner == p->fec_inner) && + (state->symbol_rate == p->symbol_rate)) { + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + if (fe->ops.tuner_ops.get_frequency) { + u32 tmp; + fe->ops.tuner_ops.get_frequency(fe, &tmp); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + s5h1420_setfreqoffset(state, p->frequency - tmp); + } else { + s5h1420_setfreqoffset(state, 0); + } + dprintk("simple tune\n"); + return 0; + } + dprintk("tuning demod\n"); + + /* first of all, software reset */ + s5h1420_reset(state); + + /* set s5h1420 fclk PLL according to desired symbol rate */ + if (p->symbol_rate > 33000000) + state->fclk = 80000000; + else if (p->symbol_rate > 28500000) + state->fclk = 59000000; + else if (p->symbol_rate > 25000000) + state->fclk = 86000000; + else if (p->symbol_rate > 1900000) + state->fclk = 88000000; + else + state->fclk = 44000000; + + dprintk("pll01: %d, ToneFreq: %d\n", state->fclk/1000000 - 8, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); + s5h1420_writereg(state, PLL01, state->fclk/1000000 - 8); + s5h1420_writereg(state, PLL02, 0x40); + s5h1420_writereg(state, DiS01, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); + + /* TODO DC offset removal, config parameter ? */ + if (p->symbol_rate > 29000000) + s5h1420_writereg(state, QPSK01, 0xae | 0x10); + else + s5h1420_writereg(state, QPSK01, 0xac | 0x10); + + /* set misc registers */ + s5h1420_writereg(state, CON_1, 0x00); + s5h1420_writereg(state, QPSK02, 0x00); + s5h1420_writereg(state, Pre01, 0xb0); + + s5h1420_writereg(state, Loop01, 0xF0); + s5h1420_writereg(state, Loop02, 0x2a); /* e7 for s5h1420 */ + s5h1420_writereg(state, Loop03, 0x79); /* 78 for s5h1420 */ + if (p->symbol_rate > 20000000) + s5h1420_writereg(state, Loop04, 0x79); + else + s5h1420_writereg(state, Loop04, 0x58); + s5h1420_writereg(state, Loop05, 0x6b); + + if (p->symbol_rate >= 8000000) + s5h1420_writereg(state, Post01, (0 << 6) | 0x10); + else if (p->symbol_rate >= 4000000) + s5h1420_writereg(state, Post01, (1 << 6) | 0x10); + else + s5h1420_writereg(state, Post01, (3 << 6) | 0x10); + + s5h1420_writereg(state, Monitor12, 0x00); /* unfreeze DC compensation */ + + s5h1420_writereg(state, Sync01, 0x33); + s5h1420_writereg(state, Mpeg01, state->config->cdclk_polarity); + s5h1420_writereg(state, Mpeg02, 0x3d); /* Parallel output more, disabled -> enabled later */ + s5h1420_writereg(state, Err01, 0x03); /* 0x1d for s5h1420 */ + + s5h1420_writereg(state, Vit06, 0x6e); /* 0x8e for s5h1420 */ + s5h1420_writereg(state, DiS03, 0x00); + s5h1420_writereg(state, Rf01, 0x61); /* Tuner i2c address - for the gate controller */ + + /* set tuner PLL */ + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + s5h1420_setfreqoffset(state, 0); + } + + /* set the reset of the parameters */ + s5h1420_setsymbolrate(state, p); + s5h1420_setfec_inversion(state, p); + + /* start QPSK */ + s5h1420_writereg(state, QPSK01, s5h1420_readreg(state, QPSK01) | 1); + + state->fec_inner = p->fec_inner; + state->symbol_rate = p->symbol_rate; + state->postlocked = 0; + state->tunedfreq = p->frequency; + + dprintk("leave %s\n", __func__); + return 0; +} + +static int s5h1420_get_frontend(struct dvb_frontend* fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s5h1420_state* state = fe->demodulator_priv; + + p->frequency = state->tunedfreq + s5h1420_getfreqoffset(state); + p->inversion = s5h1420_getinversion(state); + p->symbol_rate = s5h1420_getsymbolrate(state); + p->fec_inner = s5h1420_getfec(state); + + return 0; +} + +static int s5h1420_get_tune_settings(struct dvb_frontend* fe, + struct dvb_frontend_tune_settings* fesettings) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + if (p->symbol_rate > 20000000) { + fesettings->min_delay_ms = 50; + fesettings->step_size = 2000; + fesettings->max_drift = 8000; + } else if (p->symbol_rate > 12000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 1500; + fesettings->max_drift = 9000; + } else if (p->symbol_rate > 8000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 1000; + fesettings->max_drift = 8000; + } else if (p->symbol_rate > 4000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 500; + fesettings->max_drift = 7000; + } else if (p->symbol_rate > 2000000) { + fesettings->min_delay_ms = 200; + fesettings->step_size = (p->symbol_rate / 8000); + fesettings->max_drift = 14 * fesettings->step_size; + } else { + fesettings->min_delay_ms = 200; + fesettings->step_size = (p->symbol_rate / 8000); + fesettings->max_drift = 18 * fesettings->step_size; + } + + return 0; +} + +static int s5h1420_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + if (enable) + return s5h1420_writereg(state, 0x02, state->CON_1_val | 1); + else + return s5h1420_writereg(state, 0x02, state->CON_1_val & 0xfe); +} + +static int s5h1420_init (struct dvb_frontend* fe) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + /* disable power down and do reset */ + state->CON_1_val = state->config->serial_mpeg << 4; + s5h1420_writereg(state, 0x02, state->CON_1_val); + msleep(10); + s5h1420_reset(state); + + return 0; +} + +static int s5h1420_sleep(struct dvb_frontend* fe) +{ + struct s5h1420_state* state = fe->demodulator_priv; + state->CON_1_val = 0x12; + return s5h1420_writereg(state, 0x02, state->CON_1_val); +} + +static void s5h1420_release(struct dvb_frontend* fe) +{ + struct s5h1420_state* state = fe->demodulator_priv; + i2c_del_adapter(&state->tuner_i2c_adapter); + kfree(state); +} + +static u32 s5h1420_tuner_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int s5h1420_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct s5h1420_state *state = i2c_get_adapdata(i2c_adap); + struct i2c_msg m[3]; + u8 tx_open[2] = { CON_1, state->CON_1_val | 1 }; /* repeater stops once there was a stop condition */ + + if (1 + num > ARRAY_SIZE(m)) { + printk(KERN_WARNING + "%s: i2c xfer: num=%d is too big!\n", + KBUILD_MODNAME, num); + return -EOPNOTSUPP; + } + + memset(m, 0, sizeof(struct i2c_msg) * (1 + num)); + + m[0].addr = state->config->demod_address; + m[0].buf = tx_open; + m[0].len = 2; + + memcpy(&m[1], msg, sizeof(struct i2c_msg) * num); + + return i2c_transfer(state->i2c, m, 1 + num) == 1 + num ? num : -EIO; +} + +static struct i2c_algorithm s5h1420_tuner_i2c_algo = { + .master_xfer = s5h1420_tuner_i2c_tuner_xfer, + .functionality = s5h1420_tuner_i2c_func, +}; + +struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + struct s5h1420_state *state = fe->demodulator_priv; + return &state->tuner_i2c_adapter; +} +EXPORT_SYMBOL(s5h1420_get_tuner_i2c_adapter); + +static struct dvb_frontend_ops s5h1420_ops; + +struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, + struct i2c_adapter *i2c) +{ + /* allocate memory for the internal state */ + struct s5h1420_state *state = kzalloc(sizeof(struct s5h1420_state), GFP_KERNEL); + u8 i; + + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->postlocked = 0; + state->fclk = 88000000; + state->tunedfreq = 0; + state->fec_inner = FEC_NONE; + state->symbol_rate = 0; + + /* check if the demod is there + identify it */ + i = s5h1420_readreg(state, ID01); + if (i != 0x03) + goto error; + + memset(state->shadow, 0xff, sizeof(state->shadow)); + + for (i = 0; i < 0x50; i++) + state->shadow[i] = s5h1420_readreg(state, i); + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &s5h1420_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + /* create tuner i2c adapter */ + strlcpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", + sizeof(state->tuner_i2c_adapter.name)); + state->tuner_i2c_adapter.algo = &s5h1420_tuner_i2c_algo; + state->tuner_i2c_adapter.algo_data = NULL; + i2c_set_adapdata(&state->tuner_i2c_adapter, state); + if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) { + printk(KERN_ERR "S5H1420/PN1010: tuner i2c bus could not be initialized\n"); + goto error; + } + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(s5h1420_attach); + +static struct dvb_frontend_ops s5h1420_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Samsung S5H1420/PnpNetwork PN1010 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .frequency_tolerance = 29500, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + /* .symbol_rate_tolerance = ???,*/ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK + }, + + .release = s5h1420_release, + + .init = s5h1420_init, + .sleep = s5h1420_sleep, + .i2c_gate_ctrl = s5h1420_i2c_gate_ctrl, + + .set_frontend = s5h1420_set_frontend, + .get_frontend = s5h1420_get_frontend, + .get_tune_settings = s5h1420_get_tune_settings, + + .read_status = s5h1420_read_status, + .read_ber = s5h1420_read_ber, + .read_signal_strength = s5h1420_read_signal_strength, + .read_ucblocks = s5h1420_read_ucblocks, + + .diseqc_send_master_cmd = s5h1420_send_master_cmd, + .diseqc_recv_slave_reply = s5h1420_recv_slave_reply, + .diseqc_send_burst = s5h1420_send_burst, + .set_tone = s5h1420_set_tone, + .set_voltage = s5h1420_set_voltage, +}; + +MODULE_DESCRIPTION("Samsung S5H1420/PnpNetwork PN1010 DVB-S Demodulator driver"); +MODULE_AUTHOR("Andrew de Quincey, Patrick Boettcher"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/s5h1420.h b/drivers/media/dvb-frontends/s5h1420.h new file mode 100644 index 00000000..210049b5 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1420.h @@ -0,0 +1,61 @@ +/* + * Driver for + * Samsung S5H1420 and + * PnpNetwork PN1010 QPSK Demodulator + * + * Copyright (C) 2005 Andrew de Quincey + * Copyright (C) 2005-8 Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef S5H1420_H +#define S5H1420_H + +#include + +struct s5h1420_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* does the inversion require inversion? */ + u8 invert:1; + + u8 repeated_start_workaround:1; + u8 cdclk_polarity:1; /* 1 == falling edge, 0 == raising edge */ + + u8 serial_mpeg:1; +}; + +#if IS_ENABLED(CONFIG_DVB_S5H1420) +extern struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, + struct i2c_adapter *i2c); +extern struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe); +#else +static inline struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + return NULL; +} +#endif // CONFIG_DVB_S5H1420 + +#endif // S5H1420_H diff --git a/drivers/media/dvb-frontends/s5h1420_priv.h b/drivers/media/dvb-frontends/s5h1420_priv.h new file mode 100644 index 00000000..d9c58d28 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1420_priv.h @@ -0,0 +1,102 @@ +/* + * Driver for + * Samsung S5H1420 and + * PnpNetwork PN1010 QPSK Demodulator + * + * Copyright (C) 2005 Andrew de Quincey + * Copyright (C) 2005 Patrick Boettcher + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 675 Mass + * Ave, Cambridge, MA 02139, USA. + */ +#ifndef S5H1420_PRIV +#define S5H1420_PRIV + +#include + +enum s5h1420_register { + ID01 = 0x00, + CON_0 = 0x01, + CON_1 = 0x02, + PLL01 = 0x03, + PLL02 = 0x04, + QPSK01 = 0x05, + QPSK02 = 0x06, + Pre01 = 0x07, + Post01 = 0x08, + Loop01 = 0x09, + Loop02 = 0x0a, + Loop03 = 0x0b, + Loop04 = 0x0c, + Loop05 = 0x0d, + Pnco01 = 0x0e, + Pnco02 = 0x0f, + Pnco03 = 0x10, + Tnco01 = 0x11, + Tnco02 = 0x12, + Tnco03 = 0x13, + Monitor01 = 0x14, + Monitor02 = 0x15, + Monitor03 = 0x16, + Monitor04 = 0x17, + Monitor05 = 0x18, + Monitor06 = 0x19, + Monitor07 = 0x1a, + Monitor12 = 0x1f, + + FEC01 = 0x22, + Soft01 = 0x23, + Soft02 = 0x24, + Soft03 = 0x25, + Soft04 = 0x26, + Soft05 = 0x27, + Soft06 = 0x28, + Vit01 = 0x29, + Vit02 = 0x2a, + Vit03 = 0x2b, + Vit04 = 0x2c, + Vit05 = 0x2d, + Vit06 = 0x2e, + Vit07 = 0x2f, + Vit08 = 0x30, + Vit09 = 0x31, + Vit10 = 0x32, + Vit11 = 0x33, + Vit12 = 0x34, + Sync01 = 0x35, + Sync02 = 0x36, + Rs01 = 0x37, + Mpeg01 = 0x38, + Mpeg02 = 0x39, + DiS01 = 0x3a, + DiS02 = 0x3b, + DiS03 = 0x3c, + DiS04 = 0x3d, + DiS05 = 0x3e, + DiS06 = 0x3f, + DiS07 = 0x40, + DiS08 = 0x41, + DiS09 = 0x42, + DiS10 = 0x43, + DiS11 = 0x44, + Rf01 = 0x45, + Err01 = 0x46, + Err02 = 0x47, + Err03 = 0x48, + Err04 = 0x49, +}; + + +#endif diff --git a/drivers/media/dvb-frontends/s5h1432.c b/drivers/media/dvb-frontends/s5h1432.c new file mode 100644 index 00000000..6ec16a24 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1432.c @@ -0,0 +1,403 @@ +/* + * Samsung s5h1432 DVB-T demodulator driver + * + * Copyright (C) 2009 Bill Liu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "s5h1432.h" + +struct s5h1432_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct s5h1432_config *config; + + struct dvb_frontend frontend; + + fe_modulation_t current_modulation; + unsigned int first_tune:1; + + u32 current_frequency; + int if_freq; + + u8 inversion; +}; + +static int debug; + +#define dprintk(arg...) do { \ + if (debug) \ + printk(arg); \ + } while (0) + +static int s5h1432_writereg(struct s5h1432_state *state, + u8 addr, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + + struct i2c_msg msg = {.addr = addr, .flags = 0, .buf = buf, .len = 2 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, " + "ret == %i)\n", __func__, addr, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static u8 s5h1432_readreg(struct s5h1432_state *state, u8 addr, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + {.addr = addr, .flags = 0, .buf = b0, .len = 1}, + {.addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1} + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + return b1[0]; +} + +static int s5h1432_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int s5h1432_set_channel_bandwidth(struct dvb_frontend *fe, + u32 bandwidth) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + u8 reg = 0; + + /* Register [0x2E] bit 3:2 : 8MHz = 0; 7MHz = 1; 6MHz = 2 */ + reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x2E); + reg &= ~(0x0C); + switch (bandwidth) { + case 6: + reg |= 0x08; + break; + case 7: + reg |= 0x04; + break; + case 8: + reg |= 0x00; + break; + default: + return 0; + } + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2E, reg); + return 1; +} + +static int s5h1432_set_IF(struct dvb_frontend *fe, u32 ifFreqHz) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + switch (ifFreqHz) { + case TAIWAN_HI_IF_FREQ_44_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x15); + break; + case EUROPE_HI_IF_FREQ_36_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x40); + break; + case IF_FREQ_6_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xe0); + break; + case IF_FREQ_3point3_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE); + break; + case IF_FREQ_3point5_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xED); + break; + case IF_FREQ_4_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0xAA); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0xAA); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEA); + break; + default: + { + u32 value = 0; + value = (u32) (((48000 - (ifFreqHz / 1000)) * 512 * + (u32) 32768) / (48 * 1000)); + printk(KERN_INFO + "Default IFFreq %d :reg value = 0x%x\n", + ifFreqHz, value); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, + (u8) value & 0xFF); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, + (u8) (value >> 8) & 0xFF); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, + (u8) (value >> 16) & 0xFF); + break; + } + + } + + return 1; +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int s5h1432_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + u32 dvb_bandwidth = 8; + struct s5h1432_state *state = fe->demodulator_priv; + + if (p->frequency == state->current_frequency) { + /*current_frequency = p->frequency; */ + /*state->current_frequency = p->frequency; */ + } else { + fe->ops.tuner_ops.set_params(fe); + msleep(300); + s5h1432_set_channel_bandwidth(fe, dvb_bandwidth); + switch (p->bandwidth_hz) { + case 6000000: + dvb_bandwidth = 6; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case 7000000: + dvb_bandwidth = 7; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case 8000000: + dvb_bandwidth = 8; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + default: + return 0; + } + /*fe->ops.tuner_ops.set_params(fe); */ +/*Soft Reset chip*/ + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + s5h1432_set_channel_bandwidth(fe, dvb_bandwidth); + switch (p->bandwidth_hz) { + case 6000000: + dvb_bandwidth = 6; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case 7000000: + dvb_bandwidth = 7; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case 8000000: + dvb_bandwidth = 8; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + default: + return 0; + } + /*fe->ops.tuner_ops.set_params(fe); */ + /*Soft Reset chip*/ + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + } + + state->current_frequency = p->frequency; + + return 0; +} + +static int s5h1432_init(struct dvb_frontend *fe) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + u8 reg = 0; + state->current_frequency = 0; + printk(KERN_INFO " s5h1432_init().\n"); + + /*Set VSB mode as default, this also does a soft reset */ + /*Initialize registers */ + + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x04, 0xa8); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x05, 0x01); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x07, 0x70); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x19, 0x80); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1b, 0x9D); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1c, 0x30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1d, 0x20); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x1B); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2e, 0x40); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, 0x84); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x50, 0x5a); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x5a, 0xd3); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x68, 0x50); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xb8, 0x3c); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xc4, 0x10); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xcc, 0x9c); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xDA, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe1, 0x94); + /* s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf4, 0xa1); */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf9, 0x00); + + /*For NXP tuner*/ + + /*Set 3.3MHz as default IF frequency */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE); + /* Set reg 0x1E to get the full dynamic range */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x31); + + /* Mode setting in demod */ + reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x42); + reg |= 0x80; + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, reg); + /* Serial mode */ + + /* Soft Reset chip */ + + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + + return 0; +} + +static int s5h1432_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + return 0; +} + +static int s5h1432_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + return 0; +} + +static int s5h1432_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + return 0; +} + +static int s5h1432_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + + return 0; +} + +static int s5h1432_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return 0; +} + +static int s5h1432_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + return 0; +} + +static void s5h1432_release(struct dvb_frontend *fe) +{ + struct s5h1432_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops s5h1432_ops; + +struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config, + struct i2c_adapter *i2c) +{ + struct s5h1432_state *state = NULL; + + printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n"); + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct s5h1432_state), GFP_KERNEL); + if (!state) + return NULL; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->current_modulation = QAM_16; + state->inversion = state->config->inversion; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &s5h1432_ops, + sizeof(struct dvb_frontend_ops)); + + state->frontend.demodulator_priv = state; + + return &state->frontend; +} +EXPORT_SYMBOL(s5h1432_attach); + +static struct dvb_frontend_ops s5h1432_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Samsung s5h1432 DVB-T Frontend", + .frequency_min = 177000000, + .frequency_max = 858000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER}, + + .init = s5h1432_init, + .sleep = s5h1432_sleep, + .set_frontend = s5h1432_set_frontend, + .get_tune_settings = s5h1432_get_tune_settings, + .read_status = s5h1432_read_status, + .read_ber = s5h1432_read_ber, + .read_signal_strength = s5h1432_read_signal_strength, + .read_snr = s5h1432_read_snr, + .read_ucblocks = s5h1432_read_ucblocks, + .release = s5h1432_release, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Samsung s5h1432 DVB-T Demodulator driver"); +MODULE_AUTHOR("Bill Liu"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/s5h1432.h b/drivers/media/dvb-frontends/s5h1432.h new file mode 100644 index 00000000..70917dd2 --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1432.h @@ -0,0 +1,91 @@ +/* + * Samsung s5h1432 VSB/QAM demodulator driver + * + * Copyright (C) 2009 Bill Liu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __S5H1432_H__ +#define __S5H1432_H__ + +#include +#include + +#define S5H1432_I2C_TOP_ADDR (0x02 >> 1) + +#define TAIWAN_HI_IF_FREQ_44_MHZ 44000000 +#define EUROPE_HI_IF_FREQ_36_MHZ 36000000 +#define IF_FREQ_6_MHZ 6000000 +#define IF_FREQ_3point3_MHZ 3300000 +#define IF_FREQ_3point5_MHZ 3500000 +#define IF_FREQ_4_MHZ 4000000 + +struct s5h1432_config { + + /* serial/parallel output */ +#define S5H1432_PARALLEL_OUTPUT 0 +#define S5H1432_SERIAL_OUTPUT 1 + u8 output_mode; + + /* GPIO Setting */ +#define S5H1432_GPIO_OFF 0 +#define S5H1432_GPIO_ON 1 + u8 gpio; + + /* MPEG signal timing */ +#define S5H1432_MPEGTIMING_CONTINOUS_INVERTING_CLOCK 0 +#define S5H1432_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK 1 +#define S5H1432_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK 2 +#define S5H1432_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3 + u16 mpeg_timing; + + /* IF Freq for QAM and VSB in KHz */ +#define S5H1432_IF_3250 3250 +#define S5H1432_IF_3500 3500 +#define S5H1432_IF_4000 4000 +#define S5H1432_IF_5380 5380 +#define S5H1432_IF_44000 44000 +#define S5H1432_VSB_IF_DEFAULT s5h1432_IF_44000 +#define S5H1432_QAM_IF_DEFAULT s5h1432_IF_44000 + u16 qam_if; + u16 vsb_if; + + /* Spectral Inversion */ +#define S5H1432_INVERSION_OFF 0 +#define S5H1432_INVERSION_ON 1 + u8 inversion; + + /* Return lock status based on tuner lock, or demod lock */ +#define S5H1432_TUNERLOCKING 0 +#define S5H1432_DEMODLOCKING 1 + u8 status_mode; +}; + +#if IS_ENABLED(CONFIG_DVB_S5H1432) +extern struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *s5h1432_attach(const struct s5h1432_config + *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_s5h1432 */ + +#endif /* __s5h1432_H__ */ diff --git a/drivers/media/dvb-frontends/s921.c b/drivers/media/dvb-frontends/s921.c new file mode 100644 index 00000000..a271ac3e --- /dev/null +++ b/drivers/media/dvb-frontends/s921.c @@ -0,0 +1,544 @@ +/* + * Sharp VA3A5JZ921 One Seg Broadcast Module driver + * This device is labeled as just S. 921 at the top of the frontend can + * + * Copyright (C) 2009-2010 Mauro Carvalho Chehab + * Copyright (C) 2009-2010 Douglas Landgraf + * + * Developed for Leadership SBTVD 1seg device sold in Brazil + * + * Frontend module based on cx24123 driver, getting some info from + * the old s921 driver. + * + * FIXME: Need to port to DVB v5.2 API + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include + +#include "dvb_frontend.h" +#include "s921.h" + +static int debug = 1; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + +#define rc(args...) do { \ + printk(KERN_ERR "s921: " args); \ +} while (0) + +#define dprintk(args...) \ + do { \ + if (debug) { \ + printk(KERN_DEBUG "s921: %s: ", __func__); \ + printk(args); \ + } \ + } while (0) + +struct s921_state { + struct i2c_adapter *i2c; + const struct s921_config *config; + + struct dvb_frontend frontend; + + /* The Demod can't easily provide these, we cache them */ + u32 currentfreq; +}; + +/* + * Various tuner defaults need to be established for a given frequency kHz. + * fixme: The bounds on the bands do not match the doc in real life. + * fixme: Some of them have been moved, other might need adjustment. + */ +static struct s921_bandselect_val { + u32 freq_low; + u8 band_reg; +} s921_bandselect[] = { + { 0, 0x7b }, + { 485140000, 0x5b }, + { 515140000, 0x3b }, + { 545140000, 0x1b }, + { 599140000, 0xfb }, + { 623140000, 0xdb }, + { 659140000, 0xbb }, + { 713140000, 0x9b }, +}; + +struct regdata { + u8 reg; + u8 data; +}; + +static struct regdata s921_init[] = { + { 0x01, 0x80 }, /* Probably, a reset sequence */ + { 0x01, 0x40 }, + { 0x01, 0x80 }, + { 0x01, 0x40 }, + + { 0x02, 0x00 }, + { 0x03, 0x40 }, + { 0x04, 0x01 }, + { 0x05, 0x00 }, + { 0x06, 0x00 }, + { 0x07, 0x00 }, + { 0x08, 0x00 }, + { 0x09, 0x00 }, + { 0x0a, 0x00 }, + { 0x0b, 0x5a }, + { 0x0c, 0x00 }, + { 0x0d, 0x00 }, + { 0x0f, 0x00 }, + { 0x13, 0x1b }, + { 0x14, 0x80 }, + { 0x15, 0x40 }, + { 0x17, 0x70 }, + { 0x18, 0x01 }, + { 0x19, 0x12 }, + { 0x1a, 0x01 }, + { 0x1b, 0x12 }, + { 0x1c, 0xa0 }, + { 0x1d, 0x00 }, + { 0x1e, 0x0a }, + { 0x1f, 0x08 }, + { 0x20, 0x40 }, + { 0x21, 0xff }, + { 0x22, 0x4c }, + { 0x23, 0x4e }, + { 0x24, 0x4c }, + { 0x25, 0x00 }, + { 0x26, 0x00 }, + { 0x27, 0xf4 }, + { 0x28, 0x60 }, + { 0x29, 0x88 }, + { 0x2a, 0x40 }, + { 0x2b, 0x40 }, + { 0x2c, 0xff }, + { 0x2d, 0x00 }, + { 0x2e, 0xff }, + { 0x2f, 0x00 }, + { 0x30, 0x20 }, + { 0x31, 0x06 }, + { 0x32, 0x0c }, + { 0x34, 0x0f }, + { 0x37, 0xfe }, + { 0x38, 0x00 }, + { 0x39, 0x63 }, + { 0x3a, 0x10 }, + { 0x3b, 0x10 }, + { 0x47, 0x00 }, + { 0x49, 0xe5 }, + { 0x4b, 0x00 }, + { 0x50, 0xc0 }, + { 0x52, 0x20 }, + { 0x54, 0x5a }, + { 0x55, 0x5b }, + { 0x56, 0x40 }, + { 0x57, 0x70 }, + { 0x5c, 0x50 }, + { 0x5d, 0x00 }, + { 0x62, 0x17 }, + { 0x63, 0x2f }, + { 0x64, 0x6f }, + { 0x68, 0x00 }, + { 0x69, 0x89 }, + { 0x6a, 0x00 }, + { 0x6b, 0x00 }, + { 0x6c, 0x00 }, + { 0x6d, 0x00 }, + { 0x6e, 0x00 }, + { 0x70, 0x10 }, + { 0x71, 0x00 }, + { 0x75, 0x00 }, + { 0x76, 0x30 }, + { 0x77, 0x01 }, + { 0xaf, 0x00 }, + { 0xb0, 0xa0 }, + { 0xb2, 0x3d }, + { 0xb3, 0x25 }, + { 0xb4, 0x8b }, + { 0xb5, 0x4b }, + { 0xb6, 0x3f }, + { 0xb7, 0xff }, + { 0xb8, 0xff }, + { 0xb9, 0xfc }, + { 0xba, 0x00 }, + { 0xbb, 0x00 }, + { 0xbc, 0x00 }, + { 0xd0, 0x30 }, + { 0xe4, 0x84 }, + { 0xf0, 0x48 }, + { 0xf1, 0x19 }, + { 0xf2, 0x5a }, + { 0xf3, 0x8e }, + { 0xf4, 0x2d }, + { 0xf5, 0x07 }, + { 0xf6, 0x5a }, + { 0xf7, 0xba }, + { 0xf8, 0xd7 }, +}; + +static struct regdata s921_prefreq[] = { + { 0x47, 0x60 }, + { 0x68, 0x00 }, + { 0x69, 0x89 }, + { 0xf0, 0x48 }, + { 0xf1, 0x19 }, +}; + +static struct regdata s921_postfreq[] = { + { 0xf5, 0xae }, + { 0xf6, 0xb7 }, + { 0xf7, 0xba }, + { 0xf8, 0xd7 }, + { 0x68, 0x0a }, + { 0x69, 0x09 }, +}; + +static int s921_i2c_writereg(struct s921_state *state, + u8 i2c_addr, int reg, int data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 + }; + int rc; + + rc = i2c_transfer(state->i2c, &msg, 1); + if (rc != 1) { + printk("%s: writereg rcor(rc == %i, reg == 0x%02x," + " data == 0x%02x)\n", __func__, rc, reg, data); + return rc; + } + + return 0; +} + +static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr, + struct regdata *rd, int size) +{ + int i, rc; + + for (i = 0; i < size; i++) { + rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data); + if (rc < 0) + return rc; + } + return 0; +} + +static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg) +{ + u8 val; + int rc; + struct i2c_msg msg[] = { + { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, + { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 } + }; + + rc = i2c_transfer(state->i2c, msg, 2); + + if (rc != 2) { + rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc); + return rc; + } + + return val; +} + +#define s921_readreg(state, reg) \ + s921_i2c_readreg(state, state->config->demod_address, reg) +#define s921_writereg(state, reg, val) \ + s921_i2c_writereg(state, state->config->demod_address, reg, val) +#define s921_writeregdata(state, regdata) \ + s921_i2c_writeregdata(state, state->config->demod_address, \ + regdata, ARRAY_SIZE(regdata)) + +static int s921_pll_tune(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s921_state *state = fe->demodulator_priv; + int band, rc, i; + unsigned long f_offset; + u8 f_switch; + u64 offset; + + dprintk("frequency=%i\n", p->frequency); + + for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++) + if (p->frequency < s921_bandselect[band].freq_low) + break; + band--; + + if (band < 0) { + rc("%s: frequency out of range\n", __func__); + return -EINVAL; + } + + f_switch = s921_bandselect[band].band_reg; + + offset = ((u64)p->frequency) * 258; + do_div(offset, 6000000); + f_offset = ((unsigned long)offset) + 2321; + + rc = s921_writeregdata(state, s921_prefreq); + if (rc < 0) + return rc; + + rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff); + if (rc < 0) + return rc; + + rc = s921_writereg(state, 0xf3, f_offset & 0xff); + if (rc < 0) + return rc; + + rc = s921_writereg(state, 0xf4, f_switch); + if (rc < 0) + return rc; + + rc = s921_writeregdata(state, s921_postfreq); + if (rc < 0) + return rc; + + for (i = 0 ; i < 6; i++) { + rc = s921_readreg(state, 0x80); + dprintk("status 0x80: %02x\n", rc); + } + rc = s921_writereg(state, 0x01, 0x40); + if (rc < 0) + return rc; + + rc = s921_readreg(state, 0x01); + dprintk("status 0x01: %02x\n", rc); + + rc = s921_readreg(state, 0x80); + dprintk("status 0x80: %02x\n", rc); + + rc = s921_readreg(state, 0x80); + dprintk("status 0x80: %02x\n", rc); + + rc = s921_readreg(state, 0x32); + dprintk("status 0x32: %02x\n", rc); + + dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset); + + return 0; +} + +static int s921_initfe(struct dvb_frontend *fe) +{ + struct s921_state *state = fe->demodulator_priv; + int rc; + + dprintk("\n"); + + rc = s921_writeregdata(state, s921_init); + if (rc < 0) + return rc; + + return 0; +} + +static int s921_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct s921_state *state = fe->demodulator_priv; + int regstatus, rc; + + *status = 0; + + rc = s921_readreg(state, 0x81); + if (rc < 0) + return rc; + + regstatus = rc << 8; + + rc = s921_readreg(state, 0x82); + if (rc < 0) + return rc; + + regstatus |= rc; + + dprintk("status = %04x\n", regstatus); + + /* Full Sync - We don't know what each bit means on regs 0x81/0x82 */ + if ((regstatus & 0xff) == 0x40) { + *status = FE_HAS_SIGNAL | + FE_HAS_CARRIER | + FE_HAS_VITERBI | + FE_HAS_SYNC | + FE_HAS_LOCK; + } else if (regstatus & 0x40) { + /* This is close to Full Sync, but not enough to get useful info */ + *status = FE_HAS_SIGNAL | + FE_HAS_CARRIER | + FE_HAS_VITERBI | + FE_HAS_SYNC; + } + + return 0; +} + +static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + fe_status_t status; + struct s921_state *state = fe->demodulator_priv; + int rc; + + /* FIXME: Use the proper register for it... 0x80? */ + rc = s921_read_status(fe, &status); + if (rc < 0) + return rc; + + *strength = (status & FE_HAS_LOCK) ? 0xffff : 0; + + dprintk("strength = 0x%04x\n", *strength); + + rc = s921_readreg(state, 0x01); + dprintk("status 0x01: %02x\n", rc); + + rc = s921_readreg(state, 0x80); + dprintk("status 0x80: %02x\n", rc); + + rc = s921_readreg(state, 0x32); + dprintk("status 0x32: %02x\n", rc); + + return 0; +} + +static int s921_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s921_state *state = fe->demodulator_priv; + int rc; + + dprintk("\n"); + + /* FIXME: We don't know how to use non-auto mode */ + + rc = s921_pll_tune(fe); + if (rc < 0) + return rc; + + state->currentfreq = p->frequency; + + return 0; +} + +static int s921_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct s921_state *state = fe->demodulator_priv; + + /* FIXME: Probably it is possible to get it from regs f1 and f2 */ + p->frequency = state->currentfreq; + p->delivery_system = SYS_ISDBT; + + return 0; +} + +static int s921_tune(struct dvb_frontend *fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + fe_status_t *status) +{ + int rc = 0; + + dprintk("\n"); + + if (re_tune) + rc = s921_set_frontend(fe); + + if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) + s921_read_status(fe, status); + + return rc; +} + +static int s921_get_algo(struct dvb_frontend *fe) +{ + return 1; /* FE_ALGO_HW */ +} + +static void s921_release(struct dvb_frontend *fe) +{ + struct s921_state *state = fe->demodulator_priv; + + dprintk("\n"); + kfree(state); +} + +static struct dvb_frontend_ops s921_ops; + +struct dvb_frontend *s921_attach(const struct s921_config *config, + struct i2c_adapter *i2c) +{ + /* allocate memory for the internal state */ + struct s921_state *state = + kzalloc(sizeof(struct s921_state), GFP_KERNEL); + + dprintk("\n"); + if (!state) { + rc("Unable to kzalloc\n"); + return NULL; + } + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &s921_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; +} +EXPORT_SYMBOL(s921_attach); + +static struct dvb_frontend_ops s921_ops = { + .delsys = { SYS_ISDBT }, + /* Use dib8000 values per default */ + .info = { + .name = "Sharp S921", + .frequency_min = 470000000, + /* + * Max should be 770MHz instead, according with Sharp docs, + * but Leadership doc says it works up to 806 MHz. This is + * required to get channel 69, used in Brazil + */ + .frequency_max = 806000000, + .frequency_tolerance = 0, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = s921_release, + + .init = s921_initfe, + .set_frontend = s921_set_frontend, + .get_frontend = s921_get_frontend, + .read_status = s921_read_status, + .read_signal_strength = s921_read_signal_strength, + .tune = s921_tune, + .get_frontend_algo = s921_get_algo, +}; + +MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware"); +MODULE_AUTHOR("Mauro Carvalho Chehab "); +MODULE_AUTHOR("Douglas Landgraf "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/s921.h b/drivers/media/dvb-frontends/s921.h new file mode 100644 index 00000000..8d5e2a6e --- /dev/null +++ b/drivers/media/dvb-frontends/s921.h @@ -0,0 +1,47 @@ +/* + * Sharp s921 driver + * + * Copyright (C) 2009 Mauro Carvalho Chehab + * Copyright (C) 2009 Douglas Landgraf + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef S921_H +#define S921_H + +#include +#include + +struct s921_config { + /* the demodulator's i2c address */ + u8 demod_address; +}; + +#if IS_ENABLED(CONFIG_DVB_S921) +extern struct dvb_frontend *s921_attach(const struct s921_config *config, + struct i2c_adapter *i2c); +extern struct i2c_adapter *s921_get_tuner_i2c_adapter(struct dvb_frontend *); +#else +static inline struct dvb_frontend *s921_attach( + const struct s921_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static struct i2c_adapter * + s921_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* S921_H */ diff --git a/drivers/media/dvb-frontends/si21xx.c b/drivers/media/dvb-frontends/si21xx.c new file mode 100644 index 00000000..73b47cc6 --- /dev/null +++ b/drivers/media/dvb-frontends/si21xx.c @@ -0,0 +1,951 @@ +/* DVB compliant Linux driver for the DVB-S si2109/2110 demodulator +* +* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +*/ +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "si21xx.h" + +#define REVISION_REG 0x00 +#define SYSTEM_MODE_REG 0x01 +#define TS_CTRL_REG_1 0x02 +#define TS_CTRL_REG_2 0x03 +#define PIN_CTRL_REG_1 0x04 +#define PIN_CTRL_REG_2 0x05 +#define LOCK_STATUS_REG_1 0x0f +#define LOCK_STATUS_REG_2 0x10 +#define ACQ_STATUS_REG 0x11 +#define ACQ_CTRL_REG_1 0x13 +#define ACQ_CTRL_REG_2 0x14 +#define PLL_DIVISOR_REG 0x15 +#define COARSE_TUNE_REG 0x16 +#define FINE_TUNE_REG_L 0x17 +#define FINE_TUNE_REG_H 0x18 + +#define ANALOG_AGC_POWER_LEVEL_REG 0x28 +#define CFO_ESTIMATOR_CTRL_REG_1 0x29 +#define CFO_ESTIMATOR_CTRL_REG_2 0x2a +#define CFO_ESTIMATOR_CTRL_REG_3 0x2b + +#define SYM_RATE_ESTIMATE_REG_L 0x31 +#define SYM_RATE_ESTIMATE_REG_M 0x32 +#define SYM_RATE_ESTIMATE_REG_H 0x33 + +#define CFO_ESTIMATOR_OFFSET_REG_L 0x36 +#define CFO_ESTIMATOR_OFFSET_REG_H 0x37 +#define CFO_ERROR_REG_L 0x38 +#define CFO_ERROR_REG_H 0x39 +#define SYM_RATE_ESTIMATOR_CTRL_REG 0x3a + +#define SYM_RATE_REG_L 0x3f +#define SYM_RATE_REG_M 0x40 +#define SYM_RATE_REG_H 0x41 +#define SYM_RATE_ESTIMATOR_MAXIMUM_REG 0x42 +#define SYM_RATE_ESTIMATOR_MINIMUM_REG 0x43 + +#define C_N_ESTIMATOR_CTRL_REG 0x7c +#define C_N_ESTIMATOR_THRSHLD_REG 0x7d +#define C_N_ESTIMATOR_LEVEL_REG_L 0x7e +#define C_N_ESTIMATOR_LEVEL_REG_H 0x7f + +#define BLIND_SCAN_CTRL_REG 0x80 + +#define LSA_CTRL_REG_1 0x8D +#define SPCTRM_TILT_CORR_THRSHLD_REG 0x8f +#define ONE_DB_BNDWDTH_THRSHLD_REG 0x90 +#define TWO_DB_BNDWDTH_THRSHLD_REG 0x91 +#define THREE_DB_BNDWDTH_THRSHLD_REG 0x92 +#define INBAND_POWER_THRSHLD_REG 0x93 +#define REF_NOISE_LVL_MRGN_THRSHLD_REG 0x94 + +#define VIT_SRCH_CTRL_REG_1 0xa0 +#define VIT_SRCH_CTRL_REG_2 0xa1 +#define VIT_SRCH_CTRL_REG_3 0xa2 +#define VIT_SRCH_STATUS_REG 0xa3 +#define VITERBI_BER_COUNT_REG_L 0xab +#define REED_SOLOMON_CTRL_REG 0xb0 +#define REED_SOLOMON_ERROR_COUNT_REG_L 0xb1 +#define PRBS_CTRL_REG 0xb5 + +#define LNB_CTRL_REG_1 0xc0 +#define LNB_CTRL_REG_2 0xc1 +#define LNB_CTRL_REG_3 0xc2 +#define LNB_CTRL_REG_4 0xc3 +#define LNB_CTRL_STATUS_REG 0xc4 +#define LNB_FIFO_REGS_0 0xc5 +#define LNB_FIFO_REGS_1 0xc6 +#define LNB_FIFO_REGS_2 0xc7 +#define LNB_FIFO_REGS_3 0xc8 +#define LNB_FIFO_REGS_4 0xc9 +#define LNB_FIFO_REGS_5 0xca +#define LNB_SUPPLY_CTRL_REG_1 0xcb +#define LNB_SUPPLY_CTRL_REG_2 0xcc +#define LNB_SUPPLY_CTRL_REG_3 0xcd +#define LNB_SUPPLY_CTRL_REG_4 0xce +#define LNB_SUPPLY_STATUS_REG 0xcf + +#define FAIL -1 +#define PASS 0 + +#define ALLOWABLE_FS_COUNT 10 +#define STATUS_BER 0 +#define STATUS_UCBLOCKS 1 + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "si21xx: " args); \ + } while (0) + +enum { + ACTIVE_HIGH, + ACTIVE_LOW +}; +enum { + BYTE_WIDE, + BIT_WIDE +}; +enum { + CLK_GAPPED_MODE, + CLK_CONTINUOUS_MODE +}; +enum { + RISING_EDGE, + FALLING_EDGE +}; +enum { + MSB_FIRST, + LSB_FIRST +}; +enum { + SERIAL, + PARALLEL +}; + +struct si21xx_state { + struct i2c_adapter *i2c; + const struct si21xx_config *config; + struct dvb_frontend frontend; + u8 initialised:1; + int errmode; + int fs; /*Sampling rate of the ADC in MHz*/ +}; + +/* register default initialization */ +static u8 serit_sp1511lhb_inittab[] = { + 0x01, 0x28, /* set i2c_inc_disable */ + 0x20, 0x03, + 0x27, 0x20, + 0xe0, 0x45, + 0xe1, 0x08, + 0xfe, 0x01, + 0x01, 0x28, + 0x89, 0x09, + 0x04, 0x80, + 0x05, 0x01, + 0x06, 0x00, + 0x20, 0x03, + 0x24, 0x88, + 0x29, 0x09, + 0x2a, 0x0f, + 0x2c, 0x10, + 0x2d, 0x19, + 0x2e, 0x08, + 0x2f, 0x10, + 0x30, 0x19, + 0x34, 0x20, + 0x35, 0x03, + 0x45, 0x02, + 0x46, 0x45, + 0x47, 0xd0, + 0x48, 0x00, + 0x49, 0x40, + 0x4a, 0x03, + 0x4c, 0xfd, + 0x4f, 0x2e, + 0x50, 0x2e, + 0x51, 0x10, + 0x52, 0x10, + 0x56, 0x92, + 0x59, 0x00, + 0x5a, 0x2d, + 0x5b, 0x33, + 0x5c, 0x1f, + 0x5f, 0x76, + 0x62, 0xc0, + 0x63, 0xc0, + 0x64, 0xf3, + 0x65, 0xf3, + 0x79, 0x40, + 0x6a, 0x40, + 0x6b, 0x0a, + 0x6c, 0x80, + 0x6d, 0x27, + 0x71, 0x06, + 0x75, 0x60, + 0x78, 0x00, + 0x79, 0xb5, + 0x7c, 0x05, + 0x7d, 0x1a, + 0x87, 0x55, + 0x88, 0x72, + 0x8f, 0x08, + 0x90, 0xe0, + 0x94, 0x40, + 0xa0, 0x3f, + 0xa1, 0xc0, + 0xa4, 0xcc, + 0xa5, 0x66, + 0xa6, 0x66, + 0xa7, 0x7b, + 0xa8, 0x7b, + 0xa9, 0x7b, + 0xaa, 0x9a, + 0xed, 0x04, + 0xad, 0x00, + 0xae, 0x03, + 0xcc, 0xab, + 0x01, 0x08, + 0xff, 0xff +}; + +/* low level read/writes */ +static int si21_writeregs(struct si21xx_state *state, u8 reg1, + u8 *data, int len) +{ + int ret; + u8 buf[60];/* = { reg1, data };*/ + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = len + 1 + }; + + msg.buf[0] = reg1; + memcpy(msg.buf + 1, data, len); + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, " + "ret == %i)\n", __func__, reg1, data[0], ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int si21_writereg(struct si21xx_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int si21_write(struct dvb_frontend *fe, const u8 buf[], int len) +{ + struct si21xx_state *state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return si21_writereg(state, buf[0], buf[1]); +} + +static u8 si21_readreg(struct si21xx_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static int si21_readregs(struct si21xx_state *state, u8 reg1, u8 *b, u8 len) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = ®1, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b, + .len = len + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (ret == %i)\n", __func__, ret); + + return ret == 2 ? 0 : -1; +} + +static int si21xx_wait_diseqc_idle(struct si21xx_state *state, int timeout) +{ + unsigned long start = jiffies; + + dprintk("%s\n", __func__); + + while ((si21_readreg(state, LNB_CTRL_REG_1) & 0x8) == 8) { + if (jiffies - start > timeout) { + dprintk("%s: timeout!!\n", __func__); + return -ETIMEDOUT; + } + msleep(10); + } + + return 0; +} + +static int si21xx_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct si21xx_state *state = fe->demodulator_priv; + u32 sym_rate, data_rate; + int i; + u8 sym_rate_bytes[3]; + + dprintk("%s : srate = %i\n", __func__ , srate); + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + data_rate = srate; + sym_rate = 0; + + for (i = 0; i < 4; ++i) { + sym_rate /= 100; + sym_rate = sym_rate + ((data_rate % 100) * 0x800000) / + state->fs; + data_rate /= 100; + } + for (i = 0; i < 3; ++i) + sym_rate_bytes[i] = (u8)((sym_rate >> (i * 8)) & 0xff); + + si21_writeregs(state, SYM_RATE_REG_L, sym_rate_bytes, 0x03); + + return 0; +} + +static int si21xx_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 lnb_status; + u8 LNB_CTRL_1; + int status; + + dprintk("%s\n", __func__); + + status = PASS; + LNB_CTRL_1 = 0; + + status |= si21_readregs(state, LNB_CTRL_STATUS_REG, &lnb_status, 0x01); + status |= si21_readregs(state, LNB_CTRL_REG_1, &lnb_status, 0x01); + + /*fill the FIFO*/ + status |= si21_writeregs(state, LNB_FIFO_REGS_0, m->msg, m->msg_len); + + LNB_CTRL_1 = (lnb_status & 0x70); + LNB_CTRL_1 |= m->msg_len; + + LNB_CTRL_1 |= 0x80; /* begin LNB signaling */ + + status |= si21_writeregs(state, LNB_CTRL_REG_1, &LNB_CTRL_1, 0x01); + + return status; +} + +static int si21xx_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 val; + + dprintk("%s\n", __func__); + + if (si21xx_wait_diseqc_idle(state, 100) < 0) + return -ETIMEDOUT; + + val = (0x80 | si21_readreg(state, 0xc1)); + if (si21_writereg(state, LNB_CTRL_REG_1, + burst == SEC_MINI_A ? (val & ~0x10) : (val | 0x10))) + return -EREMOTEIO; + + if (si21xx_wait_diseqc_idle(state, 100) < 0) + return -ETIMEDOUT; + + if (si21_writereg(state, LNB_CTRL_REG_1, val)) + return -EREMOTEIO; + + return 0; +} +/* 30.06.2008 */ +static int si21xx_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 val; + + dprintk("%s\n", __func__); + val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1)); + + switch (tone) { + case SEC_TONE_ON: + return si21_writereg(state, LNB_CTRL_REG_1, val | 0x20); + + case SEC_TONE_OFF: + return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x20)); + + default: + return -EINVAL; + } +} + +static int si21xx_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + struct si21xx_state *state = fe->demodulator_priv; + + u8 val; + dprintk("%s: %s\n", __func__, + volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + + val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1)); + + switch (volt) { + case SEC_VOLTAGE_18: + return si21_writereg(state, LNB_CTRL_REG_1, val | 0x40); + break; + case SEC_VOLTAGE_13: + return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x40)); + break; + default: + return -EINVAL; + } +} + +static int si21xx_init(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + int i; + int status = 0; + u8 reg1; + u8 val; + u8 reg2[2]; + + dprintk("%s\n", __func__); + + for (i = 0; ; i += 2) { + reg1 = serit_sp1511lhb_inittab[i]; + val = serit_sp1511lhb_inittab[i+1]; + if (reg1 == 0xff && val == 0xff) + break; + si21_writeregs(state, reg1, &val, 1); + } + + /*DVB QPSK SYSTEM MODE REG*/ + reg1 = 0x08; + si21_writeregs(state, SYSTEM_MODE_REG, ®1, 0x01); + + /*transport stream config*/ + /* + mode = PARALLEL; + sdata_form = LSB_FIRST; + clk_edge = FALLING_EDGE; + clk_mode = CLK_GAPPED_MODE; + strt_len = BYTE_WIDE; + sync_pol = ACTIVE_HIGH; + val_pol = ACTIVE_HIGH; + err_pol = ACTIVE_HIGH; + sclk_rate = 0x00; + parity = 0x00 ; + data_delay = 0x00; + clk_delay = 0x00; + pclk_smooth = 0x00; + */ + reg2[0] = + PARALLEL + (LSB_FIRST << 1) + + (FALLING_EDGE << 2) + (CLK_GAPPED_MODE << 3) + + (BYTE_WIDE << 4) + (ACTIVE_HIGH << 5) + + (ACTIVE_HIGH << 6) + (ACTIVE_HIGH << 7); + + reg2[1] = 0; + /* sclk_rate + (parity << 2) + + (data_delay << 3) + (clk_delay << 4) + + (pclk_smooth << 5); + */ + status |= si21_writeregs(state, TS_CTRL_REG_1, reg2, 0x02); + if (status != 0) + dprintk(" %s : TS Set Error\n", __func__); + + return 0; + +} + +static int si21_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 regs_read[2]; + u8 reg_read; + u8 i; + u8 lock; + u8 signal = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG); + + si21_readregs(state, LOCK_STATUS_REG_1, regs_read, 0x02); + reg_read = 0; + + for (i = 0; i < 7; ++i) + reg_read |= ((regs_read[0] >> i) & 0x01) << (6 - i); + + lock = ((reg_read & 0x7f) | (regs_read[1] & 0x80)); + + dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, lock); + *status = 0; + + if (signal > 10) + *status |= FE_HAS_SIGNAL; + + if (lock & 0x2) + *status |= FE_HAS_CARRIER; + + if (lock & 0x20) + *status |= FE_HAS_VITERBI; + + if (lock & 0x40) + *status |= FE_HAS_SYNC; + + if ((lock & 0x7b) == 0x7b) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int si21_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct si21xx_state *state = fe->demodulator_priv; + + /*status = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG, + (u8*)agclevel, 0x01);*/ + + u16 signal = (3 * si21_readreg(state, 0x27) * + si21_readreg(state, 0x28)); + + dprintk("%s : AGCPWR: 0x%02x%02x, signal=0x%04x\n", __func__, + si21_readreg(state, 0x27), + si21_readreg(state, 0x28), (int) signal); + + signal <<= 4; + *strength = signal; + + return 0; +} + +static int si21_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (state->errmode != STATUS_BER) + return 0; + + *ber = (si21_readreg(state, 0x1d) << 8) | + si21_readreg(state, 0x1e); + + return 0; +} + +static int si21_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct si21xx_state *state = fe->demodulator_priv; + + s32 xsnr = 0xffff - ((si21_readreg(state, 0x24) << 8) | + si21_readreg(state, 0x25)); + xsnr = 3 * (xsnr - 0xa100); + *snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr; + + dprintk("%s\n", __func__); + + return 0; +} + +static int si21_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (state->errmode != STATUS_UCBLOCKS) + *ucblocks = 0; + else + *ucblocks = (si21_readreg(state, 0x1d) << 8) | + si21_readreg(state, 0x1e); + + return 0; +} + +/* initiates a channel acquisition sequence + using the specified symbol rate and code rate */ +static int si21xx_setacquire(struct dvb_frontend *fe, int symbrate, + fe_code_rate_t crate) +{ + + struct si21xx_state *state = fe->demodulator_priv; + u8 coderates[] = { + 0x0, 0x01, 0x02, 0x04, 0x00, + 0x8, 0x10, 0x20, 0x00, 0x3f + }; + + u8 coderate_ptr; + int status; + u8 start_acq = 0x80; + u8 reg, regs[3]; + + dprintk("%s\n", __func__); + + status = PASS; + coderate_ptr = coderates[crate]; + + si21xx_set_symbolrate(fe, symbrate); + + /* write code rates to use in the Viterbi search */ + status |= si21_writeregs(state, + VIT_SRCH_CTRL_REG_1, + &coderate_ptr, 0x01); + + /* clear acq_start bit */ + status |= si21_readregs(state, ACQ_CTRL_REG_2, ®, 0x01); + reg &= ~start_acq; + status |= si21_writeregs(state, ACQ_CTRL_REG_2, ®, 0x01); + + /* use new Carrier Frequency Offset Estimator (QuickLock) */ + regs[0] = 0xCB; + regs[1] = 0x40; + regs[2] = 0xCB; + + status |= si21_writeregs(state, + TWO_DB_BNDWDTH_THRSHLD_REG, + ®s[0], 0x03); + reg = 0x56; + status |= si21_writeregs(state, + LSA_CTRL_REG_1, ®, 1); + reg = 0x05; + status |= si21_writeregs(state, + BLIND_SCAN_CTRL_REG, ®, 1); + /* start automatic acq */ + status |= si21_writeregs(state, + ACQ_CTRL_REG_2, &start_acq, 0x01); + + return status; +} + +static int si21xx_set_frontend(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + /* freq Channel carrier frequency in KHz (i.e. 1550000 KHz) + datarate Channel symbol rate in Sps (i.e. 22500000 Sps)*/ + + /* in MHz */ + unsigned char coarse_tune_freq; + int fine_tune_freq; + unsigned char sample_rate = 0; + /* boolean */ + bool inband_interferer_ind; + + /* INTERMEDIATE VALUES */ + int icoarse_tune_freq; /* MHz */ + int ifine_tune_freq; /* MHz */ + unsigned int band_high; + unsigned int band_low; + unsigned int x1; + unsigned int x2; + int i; + bool inband_interferer_div2[ALLOWABLE_FS_COUNT]; + bool inband_interferer_div4[ALLOWABLE_FS_COUNT]; + int status; + + /* allowable sample rates for ADC in MHz */ + int afs[ALLOWABLE_FS_COUNT] = { 200, 192, 193, 194, 195, + 196, 204, 205, 206, 207 + }; + /* in MHz */ + int if_limit_high; + int if_limit_low; + int lnb_lo; + int lnb_uncertanity; + + int rf_freq; + int data_rate; + unsigned char regs[4]; + + dprintk("%s : FE_SET_FRONTEND\n", __func__); + + if (c->delivery_system != SYS_DVBS) { + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) + inband_interferer_div2[i] = inband_interferer_div4[i] = false; + + if_limit_high = -700000; + if_limit_low = -100000; + /* in MHz */ + lnb_lo = 0; + lnb_uncertanity = 0; + + rf_freq = 10 * c->frequency ; + data_rate = c->symbol_rate / 100; + + status = PASS; + + band_low = (rf_freq - lnb_lo) - ((lnb_uncertanity * 200) + + (data_rate * 135)) / 200; + + band_high = (rf_freq - lnb_lo) + ((lnb_uncertanity * 200) + + (data_rate * 135)) / 200; + + + icoarse_tune_freq = 100000 * + (((rf_freq - lnb_lo) - + (if_limit_low + if_limit_high) / 2) + / 100000); + + ifine_tune_freq = (rf_freq - lnb_lo) - icoarse_tune_freq ; + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + x1 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) * + (afs[i] * 2500) + afs[i] * 2500; + + x2 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) * + (afs[i] * 2500); + + if (((band_low < x1) && (x1 < band_high)) || + ((band_low < x2) && (x2 < band_high))) + inband_interferer_div4[i] = true; + + } + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + x1 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) * + (afs[i] * 5000) + afs[i] * 5000; + + x2 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) * + (afs[i] * 5000); + + if (((band_low < x1) && (x1 < band_high)) || + ((band_low < x2) && (x2 < band_high))) + inband_interferer_div2[i] = true; + } + + inband_interferer_ind = true; + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + if (inband_interferer_div2[i] || inband_interferer_div4[i]) { + inband_interferer_ind = false; + break; + } + } + + if (inband_interferer_ind) { + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + if (!inband_interferer_div2[i]) { + sample_rate = (u8) afs[i]; + break; + } + } + } else { + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + if ((inband_interferer_div2[i] || + !inband_interferer_div4[i])) { + sample_rate = (u8) afs[i]; + break; + } + } + + } + + if (sample_rate > 207 || sample_rate < 192) + sample_rate = 200; + + fine_tune_freq = ((0x4000 * (ifine_tune_freq / 10)) / + ((sample_rate) * 1000)); + + coarse_tune_freq = (u8)(icoarse_tune_freq / 100000); + + regs[0] = sample_rate; + regs[1] = coarse_tune_freq; + regs[2] = fine_tune_freq & 0xFF; + regs[3] = fine_tune_freq >> 8 & 0xFF; + + status |= si21_writeregs(state, PLL_DIVISOR_REG, ®s[0], 0x04); + + state->fs = sample_rate;/*ADC MHz*/ + si21xx_setacquire(fe, c->symbol_rate, c->fec_inner); + + return 0; +} + +static int si21xx_sleep(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 regdata; + + dprintk("%s\n", __func__); + + si21_readregs(state, SYSTEM_MODE_REG, ®data, 0x01); + regdata |= 1 << 6; + si21_writeregs(state, SYSTEM_MODE_REG, ®data, 0x01); + state->initialised = 0; + + return 0; +} + +static void si21xx_release(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + kfree(state); +} + +static struct dvb_frontend_ops si21xx_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "SL SI21XX DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = si21xx_release, + .init = si21xx_init, + .sleep = si21xx_sleep, + .write = si21_write, + .read_status = si21_read_status, + .read_ber = si21_read_ber, + .read_signal_strength = si21_read_signal_strength, + .read_snr = si21_read_snr, + .read_ucblocks = si21_read_ucblocks, + .diseqc_send_master_cmd = si21xx_send_diseqc_msg, + .diseqc_send_burst = si21xx_send_diseqc_burst, + .set_tone = si21xx_set_tone, + .set_voltage = si21xx_set_voltage, + + .set_frontend = si21xx_set_frontend, +}; + +struct dvb_frontend *si21xx_attach(const struct si21xx_config *config, + struct i2c_adapter *i2c) +{ + struct si21xx_state *state = NULL; + int id; + + dprintk("%s\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + state->errmode = STATUS_BER; + + /* check if the demod is there */ + id = si21_readreg(state, SYSTEM_MODE_REG); + si21_writereg(state, SYSTEM_MODE_REG, id | 0x40); /* standby off */ + msleep(200); + id = si21_readreg(state, 0x00); + + /* register 0x00 contains: + 0x34 for SI2107 + 0x24 for SI2108 + 0x14 for SI2109 + 0x04 for SI2110 + */ + if (id != 0x04 && id != 0x14) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &si21xx_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(si21xx_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("SL SI21XX DVB Demodulator driver"); +MODULE_AUTHOR("Igor M. Liplianin"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/si21xx.h b/drivers/media/dvb-frontends/si21xx.h new file mode 100644 index 00000000..1509fed4 --- /dev/null +++ b/drivers/media/dvb-frontends/si21xx.h @@ -0,0 +1,37 @@ +#ifndef SI21XX_H +#define SI21XX_H + +#include +#include +#include "dvb_frontend.h" + +struct si21xx_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* minimum delay before retuning */ + int min_delay_ms; +}; + +#if IS_ENABLED(CONFIG_DVB_SI21XX) +extern struct dvb_frontend *si21xx_attach(const struct si21xx_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *si21xx_attach( + const struct si21xx_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +static inline int si21xx_writeregister(struct dvb_frontend *fe, u8 reg, u8 val) +{ + int r = 0; + u8 buf[] = {reg, val}; + if (fe->ops.write) + r = fe->ops.write(fe, buf, 2); + return r; +} + +#endif diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c new file mode 100644 index 00000000..2aa8ef76 --- /dev/null +++ b/drivers/media/dvb-frontends/sp8870.c @@ -0,0 +1,620 @@ +/* + Driver for Spase SP8870 demodulator + + Copyright (C) 1999 Juergen Peitz + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +/* + * This driver needs external firmware. Please use the command + * "/Documentation/dvb/get_dvb_firmware alps_tdlb7" to + * download/extract it, and then copy it to /usr/lib/hotplug/firmware + * or /lib/firmware (depending on configuration of firmware hotplug). + */ +#define SP8870_DEFAULT_FIRMWARE "dvb-fe-sp8870.fw" + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "sp8870.h" + + +struct sp8870_state { + + struct i2c_adapter* i2c; + + const struct sp8870_config* config; + + struct dvb_frontend frontend; + + /* demodulator private data */ + u8 initialised:1; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "sp8870: " args); \ + } while (0) + +/* firmware size for sp8870 */ +#define SP8870_FIRMWARE_SIZE 16382 + +/* starting point for firmware in file 'Sc_main.mc' */ +#define SP8870_FIRMWARE_OFFSET 0x0A + +static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data) +{ + u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 }; + int err; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +static int sp8870_readreg (struct sp8870_state* state, u16 reg) +{ + int ret; + u8 b0 [] = { reg >> 8 , reg & 0xff }; + u8 b1 [] = { 0, 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 } }; + + ret = i2c_transfer (state->i2c, msg, 2); + + if (ret != 2) { + dprintk("%s: readreg error (ret == %i)\n", __func__, ret); + return -1; + } + + return (b1[0] << 8 | b1[1]); +} + +static int sp8870_firmware_upload (struct sp8870_state* state, const struct firmware *fw) +{ + struct i2c_msg msg; + const char *fw_buf = fw->data; + int fw_pos; + u8 tx_buf[255]; + int tx_len; + int err = 0; + + dprintk ("%s: ...\n", __func__); + + if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET) + return -EINVAL; + + // system controller stop + sp8870_writereg(state, 0x0F00, 0x0000); + + // instruction RAM register hiword + sp8870_writereg(state, 0x8F08, ((SP8870_FIRMWARE_SIZE / 2) & 0xFFFF)); + + // instruction RAM MWR + sp8870_writereg(state, 0x8F0A, ((SP8870_FIRMWARE_SIZE / 2) >> 16)); + + // do firmware upload + fw_pos = SP8870_FIRMWARE_OFFSET; + while (fw_pos < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET){ + tx_len = (fw_pos <= SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - 252) ? 252 : SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - fw_pos; + // write register 0xCF0A + tx_buf[0] = 0xCF; + tx_buf[1] = 0x0A; + memcpy(&tx_buf[2], fw_buf + fw_pos, tx_len); + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.buf = tx_buf; + msg.len = tx_len + 2; + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + printk("%s: firmware upload failed!\n", __func__); + printk ("%s: i2c error (err == %i)\n", __func__, err); + return err; + } + fw_pos += tx_len; + } + + dprintk ("%s: done!\n", __func__); + return 0; +}; + +static void sp8870_microcontroller_stop (struct sp8870_state* state) +{ + sp8870_writereg(state, 0x0F08, 0x000); + sp8870_writereg(state, 0x0F09, 0x000); + + // microcontroller STOP + sp8870_writereg(state, 0x0F00, 0x000); +} + +static void sp8870_microcontroller_start (struct sp8870_state* state) +{ + sp8870_writereg(state, 0x0F08, 0x000); + sp8870_writereg(state, 0x0F09, 0x000); + + // microcontroller START + sp8870_writereg(state, 0x0F00, 0x001); + // not documented but if we don't read 0x0D01 out here + // we don't get a correct data valid signal + sp8870_readreg(state, 0x0D01); +} + +static int sp8870_read_data_valid_signal(struct sp8870_state* state) +{ + return (sp8870_readreg(state, 0x0D02) > 0); +} + +static int configure_reg0xc05 (struct dtv_frontend_properties *p, u16 *reg0xc05) +{ + int known_parameters = 1; + + *reg0xc05 = 0x000; + + switch (p->modulation) { + case QPSK: + break; + case QAM_16: + *reg0xc05 |= (1 << 10); + break; + case QAM_64: + *reg0xc05 |= (2 << 10); + break; + case QAM_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + } + + switch (p->hierarchy) { + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + *reg0xc05 |= (1 << 7); + break; + case HIERARCHY_2: + *reg0xc05 |= (2 << 7); + break; + case HIERARCHY_4: + *reg0xc05 |= (3 << 7); + break; + case HIERARCHY_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + } + + switch (p->code_rate_HP) { + case FEC_1_2: + break; + case FEC_2_3: + *reg0xc05 |= (1 << 3); + break; + case FEC_3_4: + *reg0xc05 |= (2 << 3); + break; + case FEC_5_6: + *reg0xc05 |= (3 << 3); + break; + case FEC_7_8: + *reg0xc05 |= (4 << 3); + break; + case FEC_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + } + + if (known_parameters) + *reg0xc05 |= (2 << 1); /* use specified parameters */ + else + *reg0xc05 |= (1 << 1); /* enable autoprobing */ + + return 0; +} + +static int sp8870_wake_up(struct sp8870_state* state) +{ + // enable TS output and interface pins + return sp8870_writereg(state, 0xC18, 0x00D); +} + +static int sp8870_set_frontend_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct sp8870_state* state = fe->demodulator_priv; + int err; + u16 reg0xc05; + + if ((err = configure_reg0xc05(p, ®0xc05))) + return err; + + // system controller stop + sp8870_microcontroller_stop(state); + + // set tuner parameters + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + // sample rate correction bit [23..17] + sp8870_writereg(state, 0x0319, 0x000A); + + // sample rate correction bit [16..0] + sp8870_writereg(state, 0x031A, 0x0AAB); + + // integer carrier offset + sp8870_writereg(state, 0x0309, 0x0400); + + // fractional carrier offset + sp8870_writereg(state, 0x030A, 0x0000); + + // filter for 6/7/8 Mhz channel + if (p->bandwidth_hz == 6000000) + sp8870_writereg(state, 0x0311, 0x0002); + else if (p->bandwidth_hz == 7000000) + sp8870_writereg(state, 0x0311, 0x0001); + else + sp8870_writereg(state, 0x0311, 0x0000); + + // scan order: 2k first = 0x0000, 8k first = 0x0001 + if (p->transmission_mode == TRANSMISSION_MODE_2K) + sp8870_writereg(state, 0x0338, 0x0000); + else + sp8870_writereg(state, 0x0338, 0x0001); + + sp8870_writereg(state, 0xc05, reg0xc05); + + // read status reg in order to clear pending irqs + sp8870_readreg(state, 0x200); + + // system controller start + sp8870_microcontroller_start(state); + + return 0; +} + +static int sp8870_init (struct dvb_frontend* fe) +{ + struct sp8870_state* state = fe->demodulator_priv; + const struct firmware *fw = NULL; + + sp8870_wake_up(state); + if (state->initialised) return 0; + state->initialised = 1; + + dprintk ("%s\n", __func__); + + + /* request the firmware, this will block until someone uploads it */ + printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE); + if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) { + printk("sp8870: no firmware upload (timeout or file not found?)\n"); + return -EIO; + } + + if (sp8870_firmware_upload(state, fw)) { + printk("sp8870: writing firmware to device failed\n"); + release_firmware(fw); + return -EIO; + } + release_firmware(fw); + printk("sp8870: firmware upload complete\n"); + + /* enable TS output and interface pins */ + sp8870_writereg(state, 0xc18, 0x00d); + + // system controller stop + sp8870_microcontroller_stop(state); + + // ADC mode + sp8870_writereg(state, 0x0301, 0x0003); + + // Reed Solomon parity bytes passed to output + sp8870_writereg(state, 0x0C13, 0x0001); + + // MPEG clock is suppressed if no valid data + sp8870_writereg(state, 0x0C14, 0x0001); + + /* bit 0x010: enable data valid signal */ + sp8870_writereg(state, 0x0D00, 0x010); + sp8870_writereg(state, 0x0D01, 0x000); + + return 0; +} + +static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status) +{ + struct sp8870_state* state = fe->demodulator_priv; + int status; + int signal; + + *fe_status = 0; + + status = sp8870_readreg (state, 0x0200); + if (status < 0) + return -EIO; + + signal = sp8870_readreg (state, 0x0303); + if (signal < 0) + return -EIO; + + if (signal > 0x0F) + *fe_status |= FE_HAS_SIGNAL; + if (status & 0x08) + *fe_status |= FE_HAS_SYNC; + if (status & 0x04) + *fe_status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_VITERBI; + + return 0; +} + +static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber) +{ + struct sp8870_state* state = fe->demodulator_priv; + int ret; + u32 tmp; + + *ber = 0; + + ret = sp8870_readreg(state, 0xC08); + if (ret < 0) + return -EIO; + + tmp = ret & 0x3F; + + ret = sp8870_readreg(state, 0xC07); + if (ret < 0) + return -EIO; + + tmp = ret << 6; + + if (tmp >= 0x3FFF0) + tmp = ~0; + + *ber = tmp; + + return 0; +} + +static int sp8870_read_signal_strength(struct dvb_frontend* fe, u16 * signal) +{ + struct sp8870_state* state = fe->demodulator_priv; + int ret; + u16 tmp; + + *signal = 0; + + ret = sp8870_readreg (state, 0x306); + if (ret < 0) + return -EIO; + + tmp = ret << 8; + + ret = sp8870_readreg (state, 0x303); + if (ret < 0) + return -EIO; + + tmp |= ret; + + if (tmp) + *signal = 0xFFFF - tmp; + + return 0; +} + +static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks) +{ + struct sp8870_state* state = fe->demodulator_priv; + int ret; + + *ublocks = 0; + + ret = sp8870_readreg(state, 0xC0C); + if (ret < 0) + return -EIO; + + if (ret == 0xFFFF) + ret = ~0; + + *ublocks = ret; + + return 0; +} + +/* number of trials to recover from lockup */ +#define MAXTRIALS 5 +/* maximum checks for data valid signal */ +#define MAXCHECKS 100 + +/* only for debugging: counter for detected lockups */ +static int lockups; +/* only for debugging: counter for channel switches */ +static int switches; + +static int sp8870_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct sp8870_state* state = fe->demodulator_priv; + + /* + The firmware of the sp8870 sometimes locks up after setting frontend parameters. + We try to detect this by checking the data valid signal. + If it is not set after MAXCHECKS we try to recover the lockup by setting + the frontend parameters again. + */ + + int err = 0; + int valid = 0; + int trials = 0; + int check_count = 0; + + dprintk("%s: frequency = %i\n", __func__, p->frequency); + + for (trials = 1; trials <= MAXTRIALS; trials++) { + + err = sp8870_set_frontend_parameters(fe); + if (err) + return err; + + for (check_count = 0; check_count < MAXCHECKS; check_count++) { +// valid = ((sp8870_readreg(i2c, 0x0200) & 4) == 0); + valid = sp8870_read_data_valid_signal(state); + if (valid) { + dprintk("%s: delay = %i usec\n", + __func__, check_count * 10); + break; + } + udelay(10); + } + if (valid) + break; + } + + if (!valid) { + printk("%s: firmware crash!!!!!!\n", __func__); + return -EIO; + } + + if (debug) { + if (valid) { + if (trials > 1) { + printk("%s: firmware lockup!!!\n", __func__); + printk("%s: recovered after %i trial(s))\n", __func__, trials - 1); + lockups++; + } + } + switches++; + printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups); + } + + return 0; +} + +static int sp8870_sleep(struct dvb_frontend* fe) +{ + struct sp8870_state* state = fe->demodulator_priv; + + // tristate TS output and disable interface pins + return sp8870_writereg(state, 0xC18, 0x000); +} + +static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 350; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static int sp8870_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct sp8870_state* state = fe->demodulator_priv; + + if (enable) { + return sp8870_writereg(state, 0x206, 0x001); + } else { + return sp8870_writereg(state, 0x206, 0x000); + } +} + +static void sp8870_release(struct dvb_frontend* fe) +{ + struct sp8870_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops sp8870_ops; + +struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, + struct i2c_adapter* i2c) +{ + struct sp8870_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + + /* check if the demod is there */ + if (sp8870_readreg(state, 0x0200) < 0) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &sp8870_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops sp8870_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Spase SP8870 DVB-T", + .frequency_min = 470000000, + .frequency_max = 860000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER + }, + + .release = sp8870_release, + + .init = sp8870_init, + .sleep = sp8870_sleep, + .i2c_gate_ctrl = sp8870_i2c_gate_ctrl, + + .set_frontend = sp8870_set_frontend, + .get_tune_settings = sp8870_get_tune_settings, + + .read_status = sp8870_read_status, + .read_ber = sp8870_read_ber, + .read_signal_strength = sp8870_read_signal_strength, + .read_ucblocks = sp8870_read_uncorrected_blocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Spase SP8870 DVB-T Demodulator driver"); +MODULE_AUTHOR("Juergen Peitz"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(sp8870_attach); diff --git a/drivers/media/dvb-frontends/sp8870.h b/drivers/media/dvb-frontends/sp8870.h new file mode 100644 index 00000000..065ec67d --- /dev/null +++ b/drivers/media/dvb-frontends/sp8870.h @@ -0,0 +1,50 @@ +/* + Driver for Spase SP8870 demodulator + + Copyright (C) 1999 Juergen Peitz + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef SP8870_H +#define SP8870_H + +#include +#include + +struct sp8870_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* request firmware for device */ + int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); +}; + +#if IS_ENABLED(CONFIG_DVB_SP8870) +extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_SP8870 + +#endif // SP8870_H diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c new file mode 100644 index 00000000..1bb81b5a --- /dev/null +++ b/drivers/media/dvb-frontends/sp887x.c @@ -0,0 +1,629 @@ +/* + Driver for the Spase sp887x demodulator +*/ + +/* + * This driver needs external firmware. Please use the command + * "/Documentation/dvb/get_dvb_firmware sp887x" to + * download/extract it, and then copy it to /usr/lib/hotplug/firmware + * or /lib/firmware (depending on configuration of firmware hotplug). + */ +#define SP887X_DEFAULT_FIRMWARE "dvb-fe-sp887x.fw" + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "sp887x.h" + + +struct sp887x_state { + struct i2c_adapter* i2c; + const struct sp887x_config* config; + struct dvb_frontend frontend; + + /* demodulator private data */ + u8 initialised:1; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "sp887x: " args); \ + } while (0) + +static int i2c_writebytes (struct sp887x_state* state, u8 *buf, u8 len) +{ + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = len }; + int err; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + printk ("%s: i2c write error (addr %02x, err == %i)\n", + __func__, state->config->demod_address, err); + return -EREMOTEIO; + } + + return 0; +} + +static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data) +{ + u8 b0 [] = { reg >> 8 , reg & 0xff, data >> 8, data & 0xff }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 4 }; + int ret; + + if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) { + /** + * in case of soft reset we ignore ACK errors... + */ + if (!(reg == 0xf1a && data == 0x000 && + (ret == -EREMOTEIO || ret == -EFAULT))) + { + printk("%s: writereg error " + "(reg %03x, data %03x, ret == %i)\n", + __func__, reg & 0xffff, data & 0xffff, ret); + return ret; + } + } + + return 0; +} + +static int sp887x_readreg (struct sp887x_state* state, u16 reg) +{ + u8 b0 [] = { reg >> 8 , reg & 0xff }; + u8 b1 [2]; + int ret; + struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }}; + + if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { + printk("%s: readreg error (ret == %i)\n", __func__, ret); + return -1; + } + + return (((b1[0] << 8) | b1[1]) & 0xfff); +} + +static void sp887x_microcontroller_stop (struct sp887x_state* state) +{ + dprintk("%s\n", __func__); + sp887x_writereg(state, 0xf08, 0x000); + sp887x_writereg(state, 0xf09, 0x000); + + /* microcontroller STOP */ + sp887x_writereg(state, 0xf00, 0x000); +} + +static void sp887x_microcontroller_start (struct sp887x_state* state) +{ + dprintk("%s\n", __func__); + sp887x_writereg(state, 0xf08, 0x000); + sp887x_writereg(state, 0xf09, 0x000); + + /* microcontroller START */ + sp887x_writereg(state, 0xf00, 0x001); +} + +static void sp887x_setup_agc (struct sp887x_state* state) +{ + /* setup AGC parameters */ + dprintk("%s\n", __func__); + sp887x_writereg(state, 0x33c, 0x054); + sp887x_writereg(state, 0x33b, 0x04c); + sp887x_writereg(state, 0x328, 0x000); + sp887x_writereg(state, 0x327, 0x005); + sp887x_writereg(state, 0x326, 0x001); + sp887x_writereg(state, 0x325, 0x001); + sp887x_writereg(state, 0x324, 0x001); + sp887x_writereg(state, 0x318, 0x050); + sp887x_writereg(state, 0x317, 0x3fe); + sp887x_writereg(state, 0x316, 0x001); + sp887x_writereg(state, 0x313, 0x005); + sp887x_writereg(state, 0x312, 0x002); + sp887x_writereg(state, 0x306, 0x000); + sp887x_writereg(state, 0x303, 0x000); +} + +#define BLOCKSIZE 30 +#define FW_SIZE 0x4000 +/** + * load firmware and setup MPEG interface... + */ +static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw) +{ + struct sp887x_state* state = fe->demodulator_priv; + u8 buf [BLOCKSIZE+2]; + int i; + int fw_size = fw->size; + const unsigned char *mem = fw->data; + + dprintk("%s\n", __func__); + + /* ignore the first 10 bytes, then we expect 0x4000 bytes of firmware */ + if (fw_size < FW_SIZE+10) + return -ENODEV; + + mem = fw->data + 10; + + /* soft reset */ + sp887x_writereg(state, 0xf1a, 0x000); + + sp887x_microcontroller_stop (state); + + printk ("%s: firmware upload... ", __func__); + + /* setup write pointer to -1 (end of memory) */ + /* bit 0x8000 in address is set to enable 13bit mode */ + sp887x_writereg(state, 0x8f08, 0x1fff); + + /* dummy write (wrap around to start of memory) */ + sp887x_writereg(state, 0x8f0a, 0x0000); + + for (i = 0; i < FW_SIZE; i += BLOCKSIZE) { + int c = BLOCKSIZE; + int err; + + if (i+c > FW_SIZE) + c = FW_SIZE - i; + + /* bit 0x8000 in address is set to enable 13bit mode */ + /* bit 0x4000 enables multibyte read/write transfers */ + /* write register is 0xf0a */ + buf[0] = 0xcf; + buf[1] = 0x0a; + + memcpy(&buf[2], mem + i, c); + + if ((err = i2c_writebytes (state, buf, c+2)) < 0) { + printk ("failed.\n"); + printk ("%s: i2c error (err == %i)\n", __func__, err); + return err; + } + } + + /* don't write RS bytes between packets */ + sp887x_writereg(state, 0xc13, 0x001); + + /* suppress clock if (!data_valid) */ + sp887x_writereg(state, 0xc14, 0x000); + + /* setup MPEG interface... */ + sp887x_writereg(state, 0xc1a, 0x872); + sp887x_writereg(state, 0xc1b, 0x001); + sp887x_writereg(state, 0xc1c, 0x000); /* parallel mode (serial mode == 1) */ + sp887x_writereg(state, 0xc1a, 0x871); + + /* ADC mode, 2 for MT8872, 3 for SP8870/SP8871 */ + sp887x_writereg(state, 0x301, 0x002); + + sp887x_setup_agc(state); + + /* bit 0x010: enable data valid signal */ + sp887x_writereg(state, 0xd00, 0x010); + sp887x_writereg(state, 0x0d1, 0x000); + return 0; +}; + +static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05) +{ + int known_parameters = 1; + + *reg0xc05 = 0x000; + + switch (p->modulation) { + case QPSK: + break; + case QAM_16: + *reg0xc05 |= (1 << 10); + break; + case QAM_64: + *reg0xc05 |= (2 << 10); + break; + case QAM_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + } + + switch (p->hierarchy) { + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + *reg0xc05 |= (1 << 7); + break; + case HIERARCHY_2: + *reg0xc05 |= (2 << 7); + break; + case HIERARCHY_4: + *reg0xc05 |= (3 << 7); + break; + case HIERARCHY_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + } + + switch (p->code_rate_HP) { + case FEC_1_2: + break; + case FEC_2_3: + *reg0xc05 |= (1 << 3); + break; + case FEC_3_4: + *reg0xc05 |= (2 << 3); + break; + case FEC_5_6: + *reg0xc05 |= (3 << 3); + break; + case FEC_7_8: + *reg0xc05 |= (4 << 3); + break; + case FEC_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + } + + if (known_parameters) + *reg0xc05 |= (2 << 1); /* use specified parameters */ + else + *reg0xc05 |= (1 << 1); /* enable autoprobing */ + + return 0; +} + +/** + * estimates division of two 24bit numbers, + * derived from the ves1820/stv0299 driver code + */ +static void divide (int n, int d, int *quotient_i, int *quotient_f) +{ + unsigned int q, r; + + r = (n % d) << 8; + q = (r / d); + + if (quotient_i) + *quotient_i = q; + + if (quotient_f) { + r = (r % d) << 8; + q = (q << 8) | (r / d); + r = (r % d) << 8; + *quotient_f = (q << 8) | (r / d); + } +} + +static void sp887x_correct_offsets (struct sp887x_state* state, + struct dtv_frontend_properties *p, + int actual_freq) +{ + static const u32 srate_correction [] = { 1879617, 4544878, 8098561 }; + int bw_index; + int freq_offset = actual_freq - p->frequency; + int sysclock = 61003; //[kHz] + int ifreq = 36000000; + int freq; + int frequency_shift; + + switch (p->bandwidth_hz) { + default: + case 8000000: + bw_index = 0; + break; + case 7000000: + bw_index = 1; + break; + case 6000000: + bw_index = 2; + break; + } + + if (p->inversion == INVERSION_ON) + freq = ifreq - freq_offset; + else + freq = ifreq + freq_offset; + + divide(freq / 333, sysclock, NULL, &frequency_shift); + + if (p->inversion == INVERSION_ON) + frequency_shift = -frequency_shift; + + /* sample rate correction */ + sp887x_writereg(state, 0x319, srate_correction[bw_index] >> 12); + sp887x_writereg(state, 0x31a, srate_correction[bw_index] & 0xfff); + + /* carrier offset correction */ + sp887x_writereg(state, 0x309, frequency_shift >> 12); + sp887x_writereg(state, 0x30a, frequency_shift & 0xfff); +} + +static int sp887x_setup_frontend_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct sp887x_state* state = fe->demodulator_priv; + unsigned actual_freq; + int err; + u16 val, reg0xc05; + + if (p->bandwidth_hz != 8000000 && + p->bandwidth_hz != 7000000 && + p->bandwidth_hz != 6000000) + return -EINVAL; + + if ((err = configure_reg0xc05(p, ®0xc05))) + return err; + + sp887x_microcontroller_stop(state); + + /* setup the PLL */ + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + if (fe->ops.tuner_ops.get_frequency) { + fe->ops.tuner_ops.get_frequency(fe, &actual_freq); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } else { + actual_freq = p->frequency; + } + + /* read status reg in order to clear bandwidth_hz == 6000000) + val = 2; + else if (p->bandwidth_hz == 7000000) + val = 1; + else + val = 0; + + sp887x_writereg(state, 0x311, val); + + /* scan order: 2k first = 0, 8k first = 1 */ + if (p->transmission_mode == TRANSMISSION_MODE_2K) + sp887x_writereg(state, 0x338, 0x000); + else + sp887x_writereg(state, 0x338, 0x001); + + sp887x_writereg(state, 0xc05, reg0xc05); + + if (p->bandwidth_hz == 6000000) + val = 2 << 3; + else if (p->bandwidth_hz == 7000000) + val = 3 << 3; + else + val = 0 << 3; + + /* enable OFDM and SAW bits as lock indicators in sync register 0xf17, + * optimize algorithm for given bandwidth... + */ + sp887x_writereg(state, 0xf14, 0x160 | val); + sp887x_writereg(state, 0xf15, 0x000); + + sp887x_microcontroller_start(state); + return 0; +} + +static int sp887x_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct sp887x_state* state = fe->demodulator_priv; + u16 snr12 = sp887x_readreg(state, 0xf16); + u16 sync0x200 = sp887x_readreg(state, 0x200); + u16 sync0xf17 = sp887x_readreg(state, 0xf17); + + *status = 0; + + if (snr12 > 0x00f) + *status |= FE_HAS_SIGNAL; + + //if (sync0x200 & 0x004) + // *status |= FE_HAS_SYNC | FE_HAS_CARRIER; + + //if (sync0x200 & 0x008) + // *status |= FE_HAS_VITERBI; + + if ((sync0xf17 & 0x00f) == 0x002) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_CARRIER; + } + + if (sync0x200 & 0x001) { /* tuner adjustment requested...*/ + int steps = (sync0x200 >> 4) & 0x00f; + if (steps & 0x008) + steps = -steps; + dprintk("sp887x: implement tuner adjustment (%+i steps)!!\n", + steps); + } + + return 0; +} + +static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct sp887x_state* state = fe->demodulator_priv; + + *ber = (sp887x_readreg(state, 0xc08) & 0x3f) | + (sp887x_readreg(state, 0xc07) << 6); + sp887x_writereg(state, 0xc08, 0x000); + sp887x_writereg(state, 0xc07, 0x000); + if (*ber >= 0x3fff0) + *ber = ~0; + + return 0; +} + +static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct sp887x_state* state = fe->demodulator_priv; + + u16 snr12 = sp887x_readreg(state, 0xf16); + u32 signal = 3 * (snr12 << 4); + *strength = (signal < 0xffff) ? signal : 0xffff; + + return 0; +} + +static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct sp887x_state* state = fe->demodulator_priv; + + u16 snr12 = sp887x_readreg(state, 0xf16); + *snr = (snr12 << 4) | (snr12 >> 8); + + return 0; +} + +static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct sp887x_state* state = fe->demodulator_priv; + + *ucblocks = sp887x_readreg(state, 0xc0c); + if (*ucblocks == 0xfff) + *ucblocks = ~0; + + return 0; +} + +static int sp887x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct sp887x_state* state = fe->demodulator_priv; + + if (enable) { + return sp887x_writereg(state, 0x206, 0x001); + } else { + return sp887x_writereg(state, 0x206, 0x000); + } +} + +static int sp887x_sleep(struct dvb_frontend* fe) +{ + struct sp887x_state* state = fe->demodulator_priv; + + /* tristate TS output and disable interface pins */ + sp887x_writereg(state, 0xc18, 0x000); + + return 0; +} + +static int sp887x_init(struct dvb_frontend* fe) +{ + struct sp887x_state* state = fe->demodulator_priv; + const struct firmware *fw = NULL; + int ret; + + if (!state->initialised) { + /* request the firmware, this will block until someone uploads it */ + printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE); + ret = state->config->request_firmware(fe, &fw, SP887X_DEFAULT_FIRMWARE); + if (ret) { + printk("sp887x: no firmware upload (timeout or file not found?)\n"); + return ret; + } + + ret = sp887x_initial_setup(fe, fw); + release_firmware(fw); + if (ret) { + printk("sp887x: writing firmware to device failed\n"); + return ret; + } + printk("sp887x: firmware upload complete\n"); + state->initialised = 1; + } + + /* enable TS output and interface pins */ + sp887x_writereg(state, 0xc18, 0x00d); + + return 0; +} + +static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 350; + fesettings->step_size = 166666*2; + fesettings->max_drift = (166666*2)+1; + return 0; +} + +static void sp887x_release(struct dvb_frontend* fe) +{ + struct sp887x_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops sp887x_ops; + +struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, + struct i2c_adapter* i2c) +{ + struct sp887x_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + + /* check if the demod is there */ + if (sp887x_readreg(state, 0x0200) < 0) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &sp887x_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops sp887x_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Spase SP887x DVB-T", + .frequency_min = 50500000, + .frequency_max = 858000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_RECOVER + }, + + .release = sp887x_release, + + .init = sp887x_init, + .sleep = sp887x_sleep, + .i2c_gate_ctrl = sp887x_i2c_gate_ctrl, + + .set_frontend = sp887x_setup_frontend_parameters, + .get_tune_settings = sp887x_get_tune_settings, + + .read_status = sp887x_read_status, + .read_ber = sp887x_read_ber, + .read_signal_strength = sp887x_read_signal_strength, + .read_snr = sp887x_read_snr, + .read_ucblocks = sp887x_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Spase sp887x DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(sp887x_attach); diff --git a/drivers/media/dvb-frontends/sp887x.h b/drivers/media/dvb-frontends/sp887x.h new file mode 100644 index 00000000..2cdc4e8b --- /dev/null +++ b/drivers/media/dvb-frontends/sp887x.h @@ -0,0 +1,32 @@ +/* + Driver for the Spase sp887x demodulator +*/ + +#ifndef SP887X_H +#define SP887X_H + +#include +#include + +struct sp887x_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* request firmware for device */ + int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); +}; + +#if IS_ENABLED(CONFIG_DVB_SP887X) +extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_SP887X + +#endif // SP887X_H diff --git a/drivers/media/dvb-frontends/stb0899_algo.c b/drivers/media/dvb-frontends/stb0899_algo.c new file mode 100644 index 00000000..117a5692 --- /dev/null +++ b/drivers/media/dvb-frontends/stb0899_algo.c @@ -0,0 +1,1525 @@ +/* + STB0899 Multistandard Frontend driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "stb0899_drv.h" +#include "stb0899_priv.h" +#include "stb0899_reg.h" + +static inline u32 stb0899_do_div(u64 n, u32 d) +{ + /* wrap do_div() for ease of use */ + + do_div(n, d); + return n; +} + +#if 0 +/* These functions are currently unused */ +/* + * stb0899_calc_srate + * Compute symbol rate + */ +static u32 stb0899_calc_srate(u32 master_clk, u8 *sfr) +{ + u64 tmp; + + /* srate = (SFR * master_clk) >> 20 */ + + /* sfr is of size 20 bit, stored with an offset of 4 bit */ + tmp = (((u32)sfr[0]) << 16) | (((u32)sfr[1]) << 8) | sfr[2]; + tmp &= ~0xf; + tmp *= master_clk; + tmp >>= 24; + + return tmp; +} + +/* + * stb0899_get_srate + * Get the current symbol rate + */ +static u32 stb0899_get_srate(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + u8 sfr[3]; + + stb0899_read_regs(state, STB0899_SFRH, sfr, 3); + + return stb0899_calc_srate(internal->master_clk, sfr); +} +#endif + +/* + * stb0899_set_srate + * Set symbol frequency + * MasterClock: master clock frequency (hz) + * SymbolRate: symbol rate (bauds) + * return symbol frequency + */ +static u32 stb0899_set_srate(struct stb0899_state *state, u32 master_clk, u32 srate) +{ + u32 tmp; + u8 sfr[3]; + + dprintk(state->verbose, FE_DEBUG, 1, "-->"); + /* + * in order to have the maximum precision, the symbol rate entered into + * the chip is computed as the closest value of the "true value". + * In this purpose, the symbol rate value is rounded (1 is added on the bit + * below the LSB ) + * + * srate = (SFR * master_clk) >> 20 + * <=> + * SFR = srate << 20 / master_clk + * + * rounded: + * SFR = (srate << 21 + master_clk) / (2 * master_clk) + * + * stored as 20 bit number with an offset of 4 bit: + * sfr = SFR << 4; + */ + + tmp = stb0899_do_div((((u64)srate) << 21) + master_clk, 2 * master_clk); + tmp <<= 4; + + sfr[0] = tmp >> 16; + sfr[1] = tmp >> 8; + sfr[2] = tmp; + + stb0899_write_regs(state, STB0899_SFRH, sfr, 3); + + return srate; +} + +/* + * stb0899_calc_derot_time + * Compute the amount of time needed by the derotator to lock + * SymbolRate: Symbol rate + * return: derotator time constant (ms) + */ +static long stb0899_calc_derot_time(long srate) +{ + if (srate > 0) + return (100000 / (srate / 1000)); + else + return 0; +} + +/* + * stb0899_carr_width + * Compute the width of the carrier + * return: width of carrier (kHz or Mhz) + */ +long stb0899_carr_width(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + + return (internal->srate + (internal->srate * internal->rolloff) / 100); +} + +/* + * stb0899_first_subrange + * Compute the first subrange of the search + */ +static void stb0899_first_subrange(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_params *params = &state->params; + struct stb0899_config *config = state->config; + + int range = 0; + u32 bandwidth = 0; + + if (config->tuner_get_bandwidth) { + stb0899_i2c_gate_ctrl(&state->frontend, 1); + config->tuner_get_bandwidth(&state->frontend, &bandwidth); + stb0899_i2c_gate_ctrl(&state->frontend, 0); + range = bandwidth - stb0899_carr_width(state) / 2; + } + + if (range > 0) + internal->sub_range = min(internal->srch_range, range); + else + internal->sub_range = 0; + + internal->freq = params->freq; + internal->tuner_offst = 0L; + internal->sub_dir = 1; +} + +/* + * stb0899_check_tmg + * check for timing lock + * internal.Ttiming: time to wait for loop lock + */ +static enum stb0899_status stb0899_check_tmg(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + int lock; + u8 reg; + s8 timing; + + msleep(internal->t_derot); + + stb0899_write_reg(state, STB0899_RTF, 0xf2); + reg = stb0899_read_reg(state, STB0899_TLIR); + lock = STB0899_GETFIELD(TLIR_TMG_LOCK_IND, reg); + timing = stb0899_read_reg(state, STB0899_RTF); + + if (lock >= 42) { + if ((lock > 48) && (abs(timing) >= 110)) { + internal->status = ANALOGCARRIER; + dprintk(state->verbose, FE_DEBUG, 1, "-->ANALOG Carrier !"); + } else { + internal->status = TIMINGOK; + dprintk(state->verbose, FE_DEBUG, 1, "------->TIMING OK !"); + } + } else { + internal->status = NOTIMING; + dprintk(state->verbose, FE_DEBUG, 1, "-->NO TIMING !"); + } + return internal->status; +} + +/* + * stb0899_search_tmg + * perform a fs/2 zig-zag to find timing + */ +static enum stb0899_status stb0899_search_tmg(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_params *params = &state->params; + + short int derot_step, derot_freq = 0, derot_limit, next_loop = 3; + int index = 0; + u8 cfr[2]; + + internal->status = NOTIMING; + + /* timing loop computation & symbol rate optimisation */ + derot_limit = (internal->sub_range / 2L) / internal->mclk; + derot_step = (params->srate / 2L) / internal->mclk; + + while ((stb0899_check_tmg(state) != TIMINGOK) && next_loop) { + index++; + derot_freq += index * internal->direction * derot_step; /* next derot zig zag position */ + + if (abs(derot_freq) > derot_limit) + next_loop--; + + if (next_loop) { + STB0899_SETFIELD_VAL(CFRM, cfr[0], MSB(state->config->inversion * derot_freq)); + STB0899_SETFIELD_VAL(CFRL, cfr[1], LSB(state->config->inversion * derot_freq)); + stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency */ + } + internal->direction = -internal->direction; /* Change zigzag direction */ + } + + if (internal->status == TIMINGOK) { + stb0899_read_regs(state, STB0899_CFRM, cfr, 2); /* get derotator frequency */ + internal->derot_freq = state->config->inversion * MAKEWORD16(cfr[0], cfr[1]); + dprintk(state->verbose, FE_DEBUG, 1, "------->TIMING OK ! Derot Freq = %d", internal->derot_freq); + } + + return internal->status; +} + +/* + * stb0899_check_carrier + * Check for carrier found + */ +static enum stb0899_status stb0899_check_carrier(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + u8 reg; + + msleep(internal->t_derot); /* wait for derotator ok */ + + reg = stb0899_read_reg(state, STB0899_CFD); + STB0899_SETFIELD_VAL(CFD_ON, reg, 1); + stb0899_write_reg(state, STB0899_CFD, reg); + + reg = stb0899_read_reg(state, STB0899_DSTATUS); + dprintk(state->verbose, FE_DEBUG, 1, "--------------------> STB0899_DSTATUS=[0x%02x]", reg); + if (STB0899_GETFIELD(CARRIER_FOUND, reg)) { + internal->status = CARRIEROK; + dprintk(state->verbose, FE_DEBUG, 1, "-------------> CARRIEROK !"); + } else { + internal->status = NOCARRIER; + dprintk(state->verbose, FE_DEBUG, 1, "-------------> NOCARRIER !"); + } + + return internal->status; +} + +/* + * stb0899_search_carrier + * Search for a QPSK carrier with the derotator + */ +static enum stb0899_status stb0899_search_carrier(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + + short int derot_freq = 0, last_derot_freq = 0, derot_limit, next_loop = 3; + int index = 0; + u8 cfr[2]; + u8 reg; + + internal->status = NOCARRIER; + derot_limit = (internal->sub_range / 2L) / internal->mclk; + derot_freq = internal->derot_freq; + + reg = stb0899_read_reg(state, STB0899_CFD); + STB0899_SETFIELD_VAL(CFD_ON, reg, 1); + stb0899_write_reg(state, STB0899_CFD, reg); + + do { + dprintk(state->verbose, FE_DEBUG, 1, "Derot Freq=%d, mclk=%d", derot_freq, internal->mclk); + if (stb0899_check_carrier(state) == NOCARRIER) { + index++; + last_derot_freq = derot_freq; + derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */ + + if(abs(derot_freq) > derot_limit) + next_loop--; + + if (next_loop) { + reg = stb0899_read_reg(state, STB0899_CFD); + STB0899_SETFIELD_VAL(CFD_ON, reg, 1); + stb0899_write_reg(state, STB0899_CFD, reg); + + STB0899_SETFIELD_VAL(CFRM, cfr[0], MSB(state->config->inversion * derot_freq)); + STB0899_SETFIELD_VAL(CFRL, cfr[1], LSB(state->config->inversion * derot_freq)); + stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency */ + } + } + + internal->direction = -internal->direction; /* Change zigzag direction */ + } while ((internal->status != CARRIEROK) && next_loop); + + if (internal->status == CARRIEROK) { + stb0899_read_regs(state, STB0899_CFRM, cfr, 2); /* get derotator frequency */ + internal->derot_freq = state->config->inversion * MAKEWORD16(cfr[0], cfr[1]); + dprintk(state->verbose, FE_DEBUG, 1, "----> CARRIER OK !, Derot Freq=%d", internal->derot_freq); + } else { + internal->derot_freq = last_derot_freq; + } + + return internal->status; +} + +/* + * stb0899_check_data + * Check for data found + */ +static enum stb0899_status stb0899_check_data(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_params *params = &state->params; + + int lock = 0, index = 0, dataTime = 500, loop; + u8 reg; + + internal->status = NODATA; + + /* RESET FEC */ + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESACS, reg, 1); + stb0899_write_reg(state, STB0899_TSTRES, reg); + msleep(1); + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESACS, reg, 0); + stb0899_write_reg(state, STB0899_TSTRES, reg); + + if (params->srate <= 2000000) + dataTime = 2000; + else if (params->srate <= 5000000) + dataTime = 1500; + else if (params->srate <= 15000000) + dataTime = 1000; + else + dataTime = 500; + + /* clear previous failed END_LOOPVIT */ + stb0899_read_reg(state, STB0899_VSTATUS); + + stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force search loop */ + while (1) { + /* WARNING! VIT LOCKED has to be tested before VIT_END_LOOOP */ + reg = stb0899_read_reg(state, STB0899_VSTATUS); + lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg); + loop = STB0899_GETFIELD(VSTATUS_END_LOOPVIT, reg); + + if (lock || loop || (index > dataTime)) + break; + index++; + } + + if (lock) { /* DATA LOCK indicator */ + internal->status = DATAOK; + dprintk(state->verbose, FE_DEBUG, 1, "-----------------> DATA OK !"); + } + + return internal->status; +} + +/* + * stb0899_search_data + * Search for a QPSK carrier with the derotator + */ +static enum stb0899_status stb0899_search_data(struct stb0899_state *state) +{ + short int derot_freq, derot_step, derot_limit, next_loop = 3; + u8 cfr[2]; + u8 reg; + int index = 1; + + struct stb0899_internal *internal = &state->internal; + struct stb0899_params *params = &state->params; + + derot_step = (params->srate / 4L) / internal->mclk; + derot_limit = (internal->sub_range / 2L) / internal->mclk; + derot_freq = internal->derot_freq; + + do { + if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) { + + derot_freq += index * internal->direction * derot_step; /* next zig zag derotator position */ + if (abs(derot_freq) > derot_limit) + next_loop--; + + if (next_loop) { + dprintk(state->verbose, FE_DEBUG, 1, "Derot freq=%d, mclk=%d", derot_freq, internal->mclk); + reg = stb0899_read_reg(state, STB0899_CFD); + STB0899_SETFIELD_VAL(CFD_ON, reg, 1); + stb0899_write_reg(state, STB0899_CFD, reg); + + STB0899_SETFIELD_VAL(CFRM, cfr[0], MSB(state->config->inversion * derot_freq)); + STB0899_SETFIELD_VAL(CFRL, cfr[1], LSB(state->config->inversion * derot_freq)); + stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency */ + + stb0899_check_carrier(state); + index++; + } + } + internal->direction = -internal->direction; /* change zig zag direction */ + } while ((internal->status != DATAOK) && next_loop); + + if (internal->status == DATAOK) { + stb0899_read_regs(state, STB0899_CFRM, cfr, 2); /* get derotator frequency */ + internal->derot_freq = state->config->inversion * MAKEWORD16(cfr[0], cfr[1]); + dprintk(state->verbose, FE_DEBUG, 1, "------> DATAOK ! Derot Freq=%d", internal->derot_freq); + } + + return internal->status; +} + +/* + * stb0899_check_range + * check if the found frequency is in the correct range + */ +static enum stb0899_status stb0899_check_range(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_params *params = &state->params; + + int range_offst, tp_freq; + + range_offst = internal->srch_range / 2000; + tp_freq = internal->freq + (internal->derot_freq * internal->mclk) / 1000; + + if ((tp_freq >= params->freq - range_offst) && (tp_freq <= params->freq + range_offst)) { + internal->status = RANGEOK; + dprintk(state->verbose, FE_DEBUG, 1, "----> RANGEOK !"); + } else { + internal->status = OUTOFRANGE; + dprintk(state->verbose, FE_DEBUG, 1, "----> OUT OF RANGE !"); + } + + return internal->status; +} + +/* + * NextSubRange + * Compute the next subrange of the search + */ +static void next_sub_range(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_params *params = &state->params; + + long old_sub_range; + + if (internal->sub_dir > 0) { + old_sub_range = internal->sub_range; + internal->sub_range = min((internal->srch_range / 2) - + (internal->tuner_offst + internal->sub_range / 2), + internal->sub_range); + + if (internal->sub_range < 0) + internal->sub_range = 0; + + internal->tuner_offst += (old_sub_range + internal->sub_range) / 2; + } + + internal->freq = params->freq + (internal->sub_dir * internal->tuner_offst) / 1000; + internal->sub_dir = -internal->sub_dir; +} + +/* + * stb0899_dvbs_algo + * Search for a signal, timing, carrier and data for a + * given frequency in a given range + */ +enum stb0899_status stb0899_dvbs_algo(struct stb0899_state *state) +{ + struct stb0899_params *params = &state->params; + struct stb0899_internal *internal = &state->internal; + struct stb0899_config *config = state->config; + + u8 bclc, reg; + u8 cfr[2]; + u8 eq_const[10]; + s32 clnI = 3; + u32 bandwidth = 0; + + /* BETA values rated @ 99MHz */ + s32 betaTab[5][4] = { + /* 5 10 20 30MBps */ + { 37, 34, 32, 31 }, /* QPSK 1/2 */ + { 37, 35, 33, 31 }, /* QPSK 2/3 */ + { 37, 35, 33, 31 }, /* QPSK 3/4 */ + { 37, 36, 33, 32 }, /* QPSK 5/6 */ + { 37, 36, 33, 32 } /* QPSK 7/8 */ + }; + + internal->direction = 1; + + stb0899_set_srate(state, internal->master_clk, params->srate); + /* Carrier loop optimization versus symbol rate for acquisition*/ + if (params->srate <= 5000000) { + stb0899_write_reg(state, STB0899_ACLC, 0x89); + bclc = stb0899_read_reg(state, STB0899_BCLC); + STB0899_SETFIELD_VAL(BETA, bclc, 0x1c); + stb0899_write_reg(state, STB0899_BCLC, bclc); + clnI = 0; + } else if (params->srate <= 15000000) { + stb0899_write_reg(state, STB0899_ACLC, 0xc9); + bclc = stb0899_read_reg(state, STB0899_BCLC); + STB0899_SETFIELD_VAL(BETA, bclc, 0x22); + stb0899_write_reg(state, STB0899_BCLC, bclc); + clnI = 1; + } else if(params->srate <= 25000000) { + stb0899_write_reg(state, STB0899_ACLC, 0x89); + bclc = stb0899_read_reg(state, STB0899_BCLC); + STB0899_SETFIELD_VAL(BETA, bclc, 0x27); + stb0899_write_reg(state, STB0899_BCLC, bclc); + clnI = 2; + } else { + stb0899_write_reg(state, STB0899_ACLC, 0xc8); + bclc = stb0899_read_reg(state, STB0899_BCLC); + STB0899_SETFIELD_VAL(BETA, bclc, 0x29); + stb0899_write_reg(state, STB0899_BCLC, bclc); + clnI = 3; + } + + dprintk(state->verbose, FE_DEBUG, 1, "Set the timing loop to acquisition"); + /* Set the timing loop to acquisition */ + stb0899_write_reg(state, STB0899_RTC, 0x46); + stb0899_write_reg(state, STB0899_CFD, 0xee); + + /* !! WARNING !! + * Do not read any status variables while acquisition, + * If any needed, read before the acquisition starts + * querying status while acquiring causes the + * acquisition to go bad and hence no locks. + */ + dprintk(state->verbose, FE_DEBUG, 1, "Derot Percent=%d Srate=%d mclk=%d", + internal->derot_percent, params->srate, internal->mclk); + + /* Initial calculations */ + internal->derot_step = internal->derot_percent * (params->srate / 1000L) / internal->mclk; /* DerotStep/1000 * Fsymbol */ + internal->t_derot = stb0899_calc_derot_time(params->srate); + internal->t_data = 500; + + dprintk(state->verbose, FE_DEBUG, 1, "RESET stream merger"); + /* RESET Stream merger */ + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESRS, reg, 1); + stb0899_write_reg(state, STB0899_TSTRES, reg); + + /* + * Set KDIVIDER to an intermediate value between + * 1/2 and 7/8 for acquisition + */ + reg = stb0899_read_reg(state, STB0899_DEMAPVIT); + STB0899_SETFIELD_VAL(DEMAPVIT_KDIVIDER, reg, 60); + stb0899_write_reg(state, STB0899_DEMAPVIT, reg); + + stb0899_write_reg(state, STB0899_EQON, 0x01); /* Equalizer OFF while acquiring */ + stb0899_write_reg(state, STB0899_VITSYNC, 0x19); + + stb0899_first_subrange(state); + do { + /* Initialisations */ + cfr[0] = cfr[1] = 0; + stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* RESET derotator frequency */ + + stb0899_write_reg(state, STB0899_RTF, 0); + reg = stb0899_read_reg(state, STB0899_CFD); + STB0899_SETFIELD_VAL(CFD_ON, reg, 1); + stb0899_write_reg(state, STB0899_CFD, reg); + + internal->derot_freq = 0; + internal->status = NOAGC1; + + /* enable tuner I/O */ + stb0899_i2c_gate_ctrl(&state->frontend, 1); + + /* Move tuner to frequency */ + dprintk(state->verbose, FE_DEBUG, 1, "Tuner set frequency"); + if (state->config->tuner_set_frequency) + state->config->tuner_set_frequency(&state->frontend, internal->freq); + + if (state->config->tuner_get_frequency) + state->config->tuner_get_frequency(&state->frontend, &internal->freq); + + msleep(internal->t_agc1 + internal->t_agc2 + internal->t_derot); /* AGC1, AGC2 and timing loop */ + dprintk(state->verbose, FE_DEBUG, 1, "current derot freq=%d", internal->derot_freq); + internal->status = AGC1OK; + + /* There is signal in the band */ + if (config->tuner_get_bandwidth) + config->tuner_get_bandwidth(&state->frontend, &bandwidth); + + /* disable tuner I/O */ + stb0899_i2c_gate_ctrl(&state->frontend, 0); + + if (params->srate <= bandwidth / 2) + stb0899_search_tmg(state); /* For low rates (SCPC) */ + else + stb0899_check_tmg(state); /* For high rates (MCPC) */ + + if (internal->status == TIMINGOK) { + dprintk(state->verbose, FE_DEBUG, 1, + "TIMING OK ! Derot freq=%d, mclk=%d", + internal->derot_freq, internal->mclk); + + if (stb0899_search_carrier(state) == CARRIEROK) { /* Search for carrier */ + dprintk(state->verbose, FE_DEBUG, 1, + "CARRIER OK ! Derot freq=%d, mclk=%d", + internal->derot_freq, internal->mclk); + + if (stb0899_search_data(state) == DATAOK) { /* Check for data */ + dprintk(state->verbose, FE_DEBUG, 1, + "DATA OK ! Derot freq=%d, mclk=%d", + internal->derot_freq, internal->mclk); + + if (stb0899_check_range(state) == RANGEOK) { + dprintk(state->verbose, FE_DEBUG, 1, + "RANGE OK ! derot freq=%d, mclk=%d", + internal->derot_freq, internal->mclk); + + internal->freq = params->freq + ((internal->derot_freq * internal->mclk) / 1000); + reg = stb0899_read_reg(state, STB0899_PLPARM); + internal->fecrate = STB0899_GETFIELD(VITCURPUN, reg); + dprintk(state->verbose, FE_DEBUG, 1, + "freq=%d, internal resultant freq=%d", + params->freq, internal->freq); + + dprintk(state->verbose, FE_DEBUG, 1, + "internal puncture rate=%d", + internal->fecrate); + } + } + } + } + if (internal->status != RANGEOK) + next_sub_range(state); + + } while (internal->sub_range && internal->status != RANGEOK); + + /* Set the timing loop to tracking */ + stb0899_write_reg(state, STB0899_RTC, 0x33); + stb0899_write_reg(state, STB0899_CFD, 0xf7); + /* if locked and range ok, set Kdiv */ + if (internal->status == RANGEOK) { + dprintk(state->verbose, FE_DEBUG, 1, "Locked & Range OK !"); + stb0899_write_reg(state, STB0899_EQON, 0x41); /* Equalizer OFF while acquiring */ + stb0899_write_reg(state, STB0899_VITSYNC, 0x39); /* SN to b'11 for acquisition */ + + /* + * Carrier loop optimization versus + * symbol Rate/Puncture Rate for Tracking + */ + reg = stb0899_read_reg(state, STB0899_BCLC); + switch (internal->fecrate) { + case STB0899_FEC_1_2: /* 13 */ + stb0899_write_reg(state, STB0899_DEMAPVIT, 0x1a); + STB0899_SETFIELD_VAL(BETA, reg, betaTab[0][clnI]); + stb0899_write_reg(state, STB0899_BCLC, reg); + break; + case STB0899_FEC_2_3: /* 18 */ + stb0899_write_reg(state, STB0899_DEMAPVIT, 44); + STB0899_SETFIELD_VAL(BETA, reg, betaTab[1][clnI]); + stb0899_write_reg(state, STB0899_BCLC, reg); + break; + case STB0899_FEC_3_4: /* 21 */ + stb0899_write_reg(state, STB0899_DEMAPVIT, 60); + STB0899_SETFIELD_VAL(BETA, reg, betaTab[2][clnI]); + stb0899_write_reg(state, STB0899_BCLC, reg); + break; + case STB0899_FEC_5_6: /* 24 */ + stb0899_write_reg(state, STB0899_DEMAPVIT, 75); + STB0899_SETFIELD_VAL(BETA, reg, betaTab[3][clnI]); + stb0899_write_reg(state, STB0899_BCLC, reg); + break; + case STB0899_FEC_6_7: /* 25 */ + stb0899_write_reg(state, STB0899_DEMAPVIT, 88); + stb0899_write_reg(state, STB0899_ACLC, 0x88); + stb0899_write_reg(state, STB0899_BCLC, 0x9a); + break; + case STB0899_FEC_7_8: /* 26 */ + stb0899_write_reg(state, STB0899_DEMAPVIT, 94); + STB0899_SETFIELD_VAL(BETA, reg, betaTab[4][clnI]); + stb0899_write_reg(state, STB0899_BCLC, reg); + break; + default: + dprintk(state->verbose, FE_DEBUG, 1, "Unsupported Puncture Rate"); + break; + } + /* release stream merger RESET */ + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESRS, reg, 0); + stb0899_write_reg(state, STB0899_TSTRES, reg); + + /* disable carrier detector */ + reg = stb0899_read_reg(state, STB0899_CFD); + STB0899_SETFIELD_VAL(CFD_ON, reg, 0); + stb0899_write_reg(state, STB0899_CFD, reg); + + stb0899_read_regs(state, STB0899_EQUAI1, eq_const, 10); + } + + return internal->status; +} + +/* + * stb0899_dvbs2_config_uwp + * Configure UWP state machine + */ +static void stb0899_dvbs2_config_uwp(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_config *config = state->config; + u32 uwp1, uwp2, uwp3, reg; + + uwp1 = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_CNTRL1); + uwp2 = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_CNTRL2); + uwp3 = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_CNTRL3); + + STB0899_SETFIELD_VAL(UWP_ESN0_AVE, uwp1, config->esno_ave); + STB0899_SETFIELD_VAL(UWP_ESN0_QUANT, uwp1, config->esno_quant); + STB0899_SETFIELD_VAL(UWP_TH_SOF, uwp1, config->uwp_threshold_sof); + + STB0899_SETFIELD_VAL(FE_COARSE_TRK, uwp2, internal->av_frame_coarse); + STB0899_SETFIELD_VAL(FE_FINE_TRK, uwp2, internal->av_frame_fine); + STB0899_SETFIELD_VAL(UWP_MISS_TH, uwp2, config->miss_threshold); + + STB0899_SETFIELD_VAL(UWP_TH_ACQ, uwp3, config->uwp_threshold_acq); + STB0899_SETFIELD_VAL(UWP_TH_TRACK, uwp3, config->uwp_threshold_track); + + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_UWP_CNTRL1, STB0899_OFF0_UWP_CNTRL1, uwp1); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_UWP_CNTRL2, STB0899_OFF0_UWP_CNTRL2, uwp2); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_UWP_CNTRL3, STB0899_OFF0_UWP_CNTRL3, uwp3); + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, SOF_SRCH_TO); + STB0899_SETFIELD_VAL(SOF_SEARCH_TIMEOUT, reg, config->sof_search_timeout); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_SOF_SRCH_TO, STB0899_OFF0_SOF_SRCH_TO, reg); +} + +/* + * stb0899_dvbs2_config_csm_auto + * Set CSM to AUTO mode + */ +static void stb0899_dvbs2_config_csm_auto(struct stb0899_state *state) +{ + u32 reg; + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1); + STB0899_SETFIELD_VAL(CSM_AUTO_PARAM, reg, 1); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, reg); +} + +static long Log2Int(int number) +{ + int i; + + i = 0; + while ((1 << i) <= abs(number)) + i++; + + if (number == 0) + i = 1; + + return i - 1; +} + +/* + * stb0899_dvbs2_calc_srate + * compute BTR_NOM_FREQ for the symbol rate + */ +static u32 stb0899_dvbs2_calc_srate(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_config *config = state->config; + + u32 dec_ratio, dec_rate, decim, remain, intval, btr_nom_freq; + u32 master_clk, srate; + + dec_ratio = (internal->master_clk * 2) / (5 * internal->srate); + dec_ratio = (dec_ratio == 0) ? 1 : dec_ratio; + dec_rate = Log2Int(dec_ratio); + decim = 1 << dec_rate; + master_clk = internal->master_clk / 1000; + srate = internal->srate / 1000; + + if (decim <= 4) { + intval = (decim * (1 << (config->btr_nco_bits - 1))) / master_clk; + remain = (decim * (1 << (config->btr_nco_bits - 1))) % master_clk; + } else { + intval = (1 << (config->btr_nco_bits - 1)) / (master_clk / 100) * decim / 100; + remain = (decim * (1 << (config->btr_nco_bits - 1))) % master_clk; + } + btr_nom_freq = (intval * srate) + ((remain * srate) / master_clk); + + return btr_nom_freq; +} + +/* + * stb0899_dvbs2_calc_dev + * compute the correction to be applied to symbol rate + */ +static u32 stb0899_dvbs2_calc_dev(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + u32 dec_ratio, correction, master_clk, srate; + + dec_ratio = (internal->master_clk * 2) / (5 * internal->srate); + dec_ratio = (dec_ratio == 0) ? 1 : dec_ratio; + + master_clk = internal->master_clk / 1000; /* for integer Caculation*/ + srate = internal->srate / 1000; /* for integer Caculation*/ + correction = (512 * master_clk) / (2 * dec_ratio * srate); + + return correction; +} + +/* + * stb0899_dvbs2_set_srate + * Set DVBS2 symbol rate + */ +static void stb0899_dvbs2_set_srate(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + + u32 dec_ratio, dec_rate, win_sel, decim, f_sym, btr_nom_freq; + u32 correction, freq_adj, band_lim, decim_cntrl, reg; + u8 anti_alias; + + /*set decimation to 1*/ + dec_ratio = (internal->master_clk * 2) / (5 * internal->srate); + dec_ratio = (dec_ratio == 0) ? 1 : dec_ratio; + dec_rate = Log2Int(dec_ratio); + + win_sel = 0; + if (dec_rate >= 5) + win_sel = dec_rate - 4; + + decim = (1 << dec_rate); + /* (FSamp/Fsymbol *100) for integer Caculation */ + f_sym = internal->master_clk / ((decim * internal->srate) / 1000); + + if (f_sym <= 2250) /* don't band limit signal going into btr block*/ + band_lim = 1; + else + band_lim = 0; /* band limit signal going into btr block*/ + + decim_cntrl = ((win_sel << 3) & 0x18) + ((band_lim << 5) & 0x20) + (dec_rate & 0x7); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_DECIM_CNTRL, STB0899_OFF0_DECIM_CNTRL, decim_cntrl); + + if (f_sym <= 3450) + anti_alias = 0; + else if (f_sym <= 4250) + anti_alias = 1; + else + anti_alias = 2; + + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_ANTI_ALIAS_SEL, STB0899_OFF0_ANTI_ALIAS_SEL, anti_alias); + btr_nom_freq = stb0899_dvbs2_calc_srate(state); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_NOM_FREQ, STB0899_OFF0_BTR_NOM_FREQ, btr_nom_freq); + + correction = stb0899_dvbs2_calc_dev(state); + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, BTR_CNTRL); + STB0899_SETFIELD_VAL(BTR_FREQ_CORR, reg, correction); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_CNTRL, STB0899_OFF0_BTR_CNTRL, reg); + + /* scale UWP+CSM frequency to sample rate*/ + freq_adj = internal->srate / (internal->master_clk / 4096); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_FREQ_ADJ_SCALE, STB0899_OFF0_FREQ_ADJ_SCALE, freq_adj); +} + +/* + * stb0899_dvbs2_set_btr_loopbw + * set bit timing loop bandwidth as a percentage of the symbol rate + */ +static void stb0899_dvbs2_set_btr_loopbw(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_config *config = state->config; + + u32 sym_peak = 23, zeta = 707, loopbw_percent = 60; + s32 dec_ratio, dec_rate, k_btr1_rshft, k_btr1, k_btr0_rshft; + s32 k_btr0, k_btr2_rshft, k_direct_shift, k_indirect_shift; + u32 decim, K, wn, k_direct, k_indirect; + u32 reg; + + dec_ratio = (internal->master_clk * 2) / (5 * internal->srate); + dec_ratio = (dec_ratio == 0) ? 1 : dec_ratio; + dec_rate = Log2Int(dec_ratio); + decim = (1 << dec_rate); + + sym_peak *= 576000; + K = (1 << config->btr_nco_bits) / (internal->master_clk / 1000); + K *= (internal->srate / 1000000) * decim; /*k=k 10^-8*/ + + if (K != 0) { + K = sym_peak / K; + wn = (4 * zeta * zeta) + 1000000; + wn = (2 * (loopbw_percent * 1000) * 40 * zeta) /wn; /*wn =wn 10^-8*/ + + k_indirect = (wn * wn) / K; + k_indirect = k_indirect; /*kindirect = kindirect 10^-6*/ + k_direct = (2 * wn * zeta) / K; /*kDirect = kDirect 10^-2*/ + k_direct *= 100; + + k_direct_shift = Log2Int(k_direct) - Log2Int(10000) - 2; + k_btr1_rshft = (-1 * k_direct_shift) + config->btr_gain_shift_offset; + k_btr1 = k_direct / (1 << k_direct_shift); + k_btr1 /= 10000; + + k_indirect_shift = Log2Int(k_indirect + 15) - 20 /*- 2*/; + k_btr0_rshft = (-1 * k_indirect_shift) + config->btr_gain_shift_offset; + k_btr0 = k_indirect * (1 << (-k_indirect_shift)); + k_btr0 /= 1000000; + + k_btr2_rshft = 0; + if (k_btr0_rshft > 15) { + k_btr2_rshft = k_btr0_rshft - 15; + k_btr0_rshft = 15; + } + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, BTR_LOOP_GAIN); + STB0899_SETFIELD_VAL(KBTR0_RSHFT, reg, k_btr0_rshft); + STB0899_SETFIELD_VAL(KBTR0, reg, k_btr0); + STB0899_SETFIELD_VAL(KBTR1_RSHFT, reg, k_btr1_rshft); + STB0899_SETFIELD_VAL(KBTR1, reg, k_btr1); + STB0899_SETFIELD_VAL(KBTR2_RSHFT, reg, k_btr2_rshft); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_LOOP_GAIN, STB0899_OFF0_BTR_LOOP_GAIN, reg); + } else + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_LOOP_GAIN, STB0899_OFF0_BTR_LOOP_GAIN, 0xc4c4f); +} + +/* + * stb0899_dvbs2_set_carr_freq + * set nominal frequency for carrier search + */ +static void stb0899_dvbs2_set_carr_freq(struct stb0899_state *state, s32 carr_freq, u32 master_clk) +{ + struct stb0899_config *config = state->config; + s32 crl_nom_freq; + u32 reg; + + crl_nom_freq = (1 << config->crl_nco_bits) / master_clk; + crl_nom_freq *= carr_freq; + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_NOM_FREQ); + STB0899_SETFIELD_VAL(CRL_NOM_FREQ, reg, crl_nom_freq); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_NOM_FREQ, STB0899_OFF0_CRL_NOM_FREQ, reg); +} + +/* + * stb0899_dvbs2_init_calc + * Initialize DVBS2 UWP, CSM, carrier and timing loops + */ +static void stb0899_dvbs2_init_calc(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + s32 steps, step_size; + u32 range, reg; + + /* config uwp and csm */ + stb0899_dvbs2_config_uwp(state); + stb0899_dvbs2_config_csm_auto(state); + + /* initialize BTR */ + stb0899_dvbs2_set_srate(state); + stb0899_dvbs2_set_btr_loopbw(state); + + if (internal->srate / 1000000 >= 15) + step_size = (1 << 17) / 5; + else if (internal->srate / 1000000 >= 10) + step_size = (1 << 17) / 7; + else if (internal->srate / 1000000 >= 5) + step_size = (1 << 17) / 10; + else + step_size = (1 << 17) / 4; + + range = internal->srch_range / 1000000; + steps = (10 * range * (1 << 17)) / (step_size * (internal->srate / 1000000)); + steps = (steps + 6) / 10; + steps = (steps == 0) ? 1 : steps; + if (steps % 2 == 0) + stb0899_dvbs2_set_carr_freq(state, internal->center_freq - + (internal->step_size * (internal->srate / 20000000)), + (internal->master_clk) / 1000000); + else + stb0899_dvbs2_set_carr_freq(state, internal->center_freq, (internal->master_clk) / 1000000); + + /*Set Carrier Search params (zigzag, num steps and freq step size*/ + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, ACQ_CNTRL2); + STB0899_SETFIELD_VAL(ZIGZAG, reg, 1); + STB0899_SETFIELD_VAL(NUM_STEPS, reg, steps); + STB0899_SETFIELD_VAL(FREQ_STEPSIZE, reg, step_size); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_ACQ_CNTRL2, STB0899_OFF0_ACQ_CNTRL2, reg); +} + +/* + * stb0899_dvbs2_btr_init + * initialize the timing loop + */ +static void stb0899_dvbs2_btr_init(struct stb0899_state *state) +{ + u32 reg; + + /* set enable BTR loopback */ + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, BTR_CNTRL); + STB0899_SETFIELD_VAL(INTRP_PHS_SENSE, reg, 1); + STB0899_SETFIELD_VAL(BTR_ERR_ENA, reg, 1); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_CNTRL, STB0899_OFF0_BTR_CNTRL, reg); + + /* fix btr freq accum at 0 */ + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_FREQ_INIT, STB0899_OFF0_BTR_FREQ_INIT, 0x10000000); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_FREQ_INIT, STB0899_OFF0_BTR_FREQ_INIT, 0x00000000); + + /* fix btr freq accum at 0 */ + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_PHS_INIT, STB0899_OFF0_BTR_PHS_INIT, 0x10000000); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_PHS_INIT, STB0899_OFF0_BTR_PHS_INIT, 0x00000000); +} + +/* + * stb0899_dvbs2_reacquire + * trigger a DVB-S2 acquisition + */ +static void stb0899_dvbs2_reacquire(struct stb0899_state *state) +{ + u32 reg = 0; + + /* demod soft reset */ + STB0899_SETFIELD_VAL(DVBS2_RESET, reg, 1); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_RESET_CNTRL, STB0899_OFF0_RESET_CNTRL, reg); + + /*Reset Timing Loop */ + stb0899_dvbs2_btr_init(state); + + /* reset Carrier loop */ + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_FREQ_INIT, STB0899_OFF0_CRL_FREQ_INIT, (1 << 30)); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_FREQ_INIT, STB0899_OFF0_CRL_FREQ_INIT, 0); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_LOOP_GAIN, STB0899_OFF0_CRL_LOOP_GAIN, 0); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_PHS_INIT, STB0899_OFF0_CRL_PHS_INIT, (1 << 30)); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_PHS_INIT, STB0899_OFF0_CRL_PHS_INIT, 0); + + /*release demod soft reset */ + reg = 0; + STB0899_SETFIELD_VAL(DVBS2_RESET, reg, 0); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_RESET_CNTRL, STB0899_OFF0_RESET_CNTRL, reg); + + /* start acquisition process */ + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_ACQUIRE_TRIG, STB0899_OFF0_ACQUIRE_TRIG, 1); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_LOCK_LOST, STB0899_OFF0_LOCK_LOST, 0); + + /* equalizer Init */ + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQUALIZER_INIT, STB0899_OFF0_EQUALIZER_INIT, 1); + + /*Start equilizer */ + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQUALIZER_INIT, STB0899_OFF0_EQUALIZER_INIT, 0); + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, EQ_CNTRL); + STB0899_SETFIELD_VAL(EQ_SHIFT, reg, 0); + STB0899_SETFIELD_VAL(EQ_DISABLE_UPDATE, reg, 0); + STB0899_SETFIELD_VAL(EQ_DELAY, reg, 0x05); + STB0899_SETFIELD_VAL(EQ_ADAPT_MODE, reg, 0x01); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQ_CNTRL, STB0899_OFF0_EQ_CNTRL, reg); + + /* RESET Packet delineator */ + stb0899_write_reg(state, STB0899_PDELCTRL, 0x4a); +} + +/* + * stb0899_dvbs2_get_dmd_status + * get DVB-S2 Demod LOCK status + */ +static enum stb0899_status stb0899_dvbs2_get_dmd_status(struct stb0899_state *state, int timeout) +{ + int time = -10, lock = 0, uwp, csm; + u32 reg; + + do { + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_STATUS); + dprintk(state->verbose, FE_DEBUG, 1, "DMD_STATUS=[0x%02x]", reg); + if (STB0899_GETFIELD(IF_AGC_LOCK, reg)) + dprintk(state->verbose, FE_DEBUG, 1, "------------->IF AGC LOCKED !"); + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_STAT2); + dprintk(state->verbose, FE_DEBUG, 1, "----------->DMD STAT2=[0x%02x]", reg); + uwp = STB0899_GETFIELD(UWP_LOCK, reg); + csm = STB0899_GETFIELD(CSM_LOCK, reg); + if (uwp && csm) + lock = 1; + + time += 10; + msleep(10); + + } while ((!lock) && (time <= timeout)); + + if (lock) { + dprintk(state->verbose, FE_DEBUG, 1, "----------------> DVB-S2 LOCK !"); + return DVBS2_DEMOD_LOCK; + } else { + return DVBS2_DEMOD_NOLOCK; + } +} + +/* + * stb0899_dvbs2_get_data_lock + * get FEC status + */ +static int stb0899_dvbs2_get_data_lock(struct stb0899_state *state, int timeout) +{ + int time = 0, lock = 0; + u8 reg; + + while ((!lock) && (time < timeout)) { + reg = stb0899_read_reg(state, STB0899_CFGPDELSTATUS1); + dprintk(state->verbose, FE_DEBUG, 1, "---------> CFGPDELSTATUS=[0x%02x]", reg); + lock = STB0899_GETFIELD(CFGPDELSTATUS_LOCK, reg); + time++; + } + + return lock; +} + +/* + * stb0899_dvbs2_get_fec_status + * get DVB-S2 FEC LOCK status + */ +static enum stb0899_status stb0899_dvbs2_get_fec_status(struct stb0899_state *state, int timeout) +{ + int time = 0, Locked; + + do { + Locked = stb0899_dvbs2_get_data_lock(state, 1); + time++; + msleep(1); + + } while ((!Locked) && (time < timeout)); + + if (Locked) { + dprintk(state->verbose, FE_DEBUG, 1, "---------->DVB-S2 FEC LOCK !"); + return DVBS2_FEC_LOCK; + } else { + return DVBS2_FEC_NOLOCK; + } +} + + +/* + * stb0899_dvbs2_init_csm + * set parameters for manual mode + */ +static void stb0899_dvbs2_init_csm(struct stb0899_state *state, int pilots, enum stb0899_modcod modcod) +{ + struct stb0899_internal *internal = &state->internal; + + s32 dvt_tbl = 1, two_pass = 0, agc_gain = 6, agc_shift = 0, loop_shift = 0, phs_diff_thr = 0x80; + s32 gamma_acq, gamma_rho_acq, gamma_trk, gamma_rho_trk, lock_count_thr; + u32 csm1, csm2, csm3, csm4; + + if (((internal->master_clk / internal->srate) <= 4) && (modcod <= 11) && (pilots == 1)) { + switch (modcod) { + case STB0899_QPSK_12: + gamma_acq = 25; + gamma_rho_acq = 2700; + gamma_trk = 12; + gamma_rho_trk = 180; + lock_count_thr = 8; + break; + case STB0899_QPSK_35: + gamma_acq = 38; + gamma_rho_acq = 7182; + gamma_trk = 14; + gamma_rho_trk = 308; + lock_count_thr = 8; + break; + case STB0899_QPSK_23: + gamma_acq = 42; + gamma_rho_acq = 9408; + gamma_trk = 17; + gamma_rho_trk = 476; + lock_count_thr = 8; + break; + case STB0899_QPSK_34: + gamma_acq = 53; + gamma_rho_acq = 16642; + gamma_trk = 19; + gamma_rho_trk = 646; + lock_count_thr = 8; + break; + case STB0899_QPSK_45: + gamma_acq = 53; + gamma_rho_acq = 17119; + gamma_trk = 22; + gamma_rho_trk = 880; + lock_count_thr = 8; + break; + case STB0899_QPSK_56: + gamma_acq = 55; + gamma_rho_acq = 19250; + gamma_trk = 23; + gamma_rho_trk = 989; + lock_count_thr = 8; + break; + case STB0899_QPSK_89: + gamma_acq = 60; + gamma_rho_acq = 24240; + gamma_trk = 24; + gamma_rho_trk = 1176; + lock_count_thr = 8; + break; + case STB0899_QPSK_910: + gamma_acq = 66; + gamma_rho_acq = 29634; + gamma_trk = 24; + gamma_rho_trk = 1176; + lock_count_thr = 8; + break; + default: + gamma_acq = 66; + gamma_rho_acq = 29634; + gamma_trk = 24; + gamma_rho_trk = 1176; + lock_count_thr = 8; + break; + } + + csm1 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1); + STB0899_SETFIELD_VAL(CSM_AUTO_PARAM, csm1, 0); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, csm1); + + csm1 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1); + csm2 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL2); + csm3 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL3); + csm4 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL4); + + STB0899_SETFIELD_VAL(CSM_DVT_TABLE, csm1, dvt_tbl); + STB0899_SETFIELD_VAL(CSM_TWO_PASS, csm1, two_pass); + STB0899_SETFIELD_VAL(CSM_AGC_GAIN, csm1, agc_gain); + STB0899_SETFIELD_VAL(CSM_AGC_SHIFT, csm1, agc_shift); + STB0899_SETFIELD_VAL(FE_LOOP_SHIFT, csm1, loop_shift); + STB0899_SETFIELD_VAL(CSM_GAMMA_ACQ, csm2, gamma_acq); + STB0899_SETFIELD_VAL(CSM_GAMMA_RHOACQ, csm2, gamma_rho_acq); + STB0899_SETFIELD_VAL(CSM_GAMMA_TRACK, csm3, gamma_trk); + STB0899_SETFIELD_VAL(CSM_GAMMA_RHOTRACK, csm3, gamma_rho_trk); + STB0899_SETFIELD_VAL(CSM_LOCKCOUNT_THRESH, csm4, lock_count_thr); + STB0899_SETFIELD_VAL(CSM_PHASEDIFF_THRESH, csm4, phs_diff_thr); + + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, csm1); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL2, STB0899_OFF0_CSM_CNTRL2, csm2); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL3, STB0899_OFF0_CSM_CNTRL3, csm3); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL4, STB0899_OFF0_CSM_CNTRL4, csm4); + } +} + +/* + * stb0899_dvbs2_get_srate + * get DVB-S2 Symbol Rate + */ +static u32 stb0899_dvbs2_get_srate(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_config *config = state->config; + + u32 bTrNomFreq, srate, decimRate, intval1, intval2, reg; + int div1, div2, rem1, rem2; + + div1 = config->btr_nco_bits / 2; + div2 = config->btr_nco_bits - div1 - 1; + + bTrNomFreq = STB0899_READ_S2REG(STB0899_S2DEMOD, BTR_NOM_FREQ); + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DECIM_CNTRL); + decimRate = STB0899_GETFIELD(DECIM_RATE, reg); + decimRate = (1 << decimRate); + + intval1 = internal->master_clk / (1 << div1); + intval2 = bTrNomFreq / (1 << div2); + + rem1 = internal->master_clk % (1 << div1); + rem2 = bTrNomFreq % (1 << div2); + /* only for integer calculation */ + srate = (intval1 * intval2) + ((intval1 * rem2) / (1 << div2)) + ((intval2 * rem1) / (1 << div1)); + srate /= decimRate; /*symbrate = (btrnomfreq_register_val*MasterClock)/2^(27+decim_rate_field) */ + + return srate; +} + +/* + * stb0899_dvbs2_algo + * Search for signal, timing, carrier and data for a given + * frequency in a given range + */ +enum stb0899_status stb0899_dvbs2_algo(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + enum stb0899_modcod modcod; + + s32 offsetfreq, searchTime, FecLockTime, pilots, iqSpectrum; + int i = 0; + u32 reg, csm1; + + if (internal->srate <= 2000000) { + searchTime = 5000; /* 5000 ms max time to lock UWP and CSM, SYMB <= 2Mbs */ + FecLockTime = 350; /* 350 ms max time to lock FEC, SYMB <= 2Mbs */ + } else if (internal->srate <= 5000000) { + searchTime = 2500; /* 2500 ms max time to lock UWP and CSM, 2Mbs < SYMB <= 5Mbs */ + FecLockTime = 170; /* 170 ms max time to lock FEC, 2Mbs< SYMB <= 5Mbs */ + } else if (internal->srate <= 10000000) { + searchTime = 1500; /* 1500 ms max time to lock UWP and CSM, 5Mbs srate <= 15000000) { + searchTime = 500; /* 500 ms max time to lock UWP and CSM, 10Mbs srate <= 20000000) { + searchTime = 300; /* 300 ms max time to lock UWP and CSM, 15Mbs < SYMB <= 20Mbs */ + FecLockTime = 30; /* 50 ms max time to lock FEC, 15Mbs< SYMB <= 20Mbs */ + } else if (internal->srate <= 25000000) { + searchTime = 250; /* 250 ms max time to lock UWP and CSM, 20 Mbs < SYMB <= 25Mbs */ + FecLockTime = 25; /* 25 ms max time to lock FEC, 20Mbs< SYMB <= 25Mbs */ + } else { + searchTime = 150; /* 150 ms max time to lock UWP and CSM, SYMB > 25Mbs */ + FecLockTime = 20; /* 20 ms max time to lock FEC, 20Mbs< SYMB <= 25Mbs */ + } + + /* Maintain Stream Merger in reset during acquisition */ + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESRS, reg, 1); + stb0899_write_reg(state, STB0899_TSTRES, reg); + + /* enable tuner I/O */ + stb0899_i2c_gate_ctrl(&state->frontend, 1); + + /* Move tuner to frequency */ + if (state->config->tuner_set_frequency) + state->config->tuner_set_frequency(&state->frontend, internal->freq); + if (state->config->tuner_get_frequency) + state->config->tuner_get_frequency(&state->frontend, &internal->freq); + + /* disable tuner I/O */ + stb0899_i2c_gate_ctrl(&state->frontend, 0); + + /* Set IF AGC to acquisition */ + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL); + STB0899_SETFIELD_VAL(IF_LOOP_GAIN, reg, 4); + STB0899_SETFIELD_VAL(IF_AGC_REF, reg, 32); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL, STB0899_OFF0_IF_AGC_CNTRL, reg); + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL2); + STB0899_SETFIELD_VAL(IF_AGC_DUMP_PER, reg, 0); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL2, STB0899_OFF0_IF_AGC_CNTRL2, reg); + + /* Initialisation */ + stb0899_dvbs2_init_calc(state); + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_CNTRL2); + switch (internal->inversion) { + case IQ_SWAP_OFF: + STB0899_SETFIELD_VAL(SPECTRUM_INVERT, reg, 0); + break; + case IQ_SWAP_ON: + STB0899_SETFIELD_VAL(SPECTRUM_INVERT, reg, 1); + break; + case IQ_SWAP_AUTO: /* use last successful search first */ + STB0899_SETFIELD_VAL(SPECTRUM_INVERT, reg, 1); + break; + } + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_DMD_CNTRL2, STB0899_OFF0_DMD_CNTRL2, reg); + stb0899_dvbs2_reacquire(state); + + /* Wait for demod lock (UWP and CSM) */ + internal->status = stb0899_dvbs2_get_dmd_status(state, searchTime); + + if (internal->status == DVBS2_DEMOD_LOCK) { + dprintk(state->verbose, FE_DEBUG, 1, "------------> DVB-S2 DEMOD LOCK !"); + i = 0; + /* Demod Locked, check FEC status */ + internal->status = stb0899_dvbs2_get_fec_status(state, FecLockTime); + + /*If false lock (UWP and CSM Locked but no FEC) try 3 time max*/ + while ((internal->status != DVBS2_FEC_LOCK) && (i < 3)) { + /* Read the frequency offset*/ + offsetfreq = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_FREQ); + + /* Set the Nominal frequency to the found frequency offset for the next reacquire*/ + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_NOM_FREQ); + STB0899_SETFIELD_VAL(CRL_NOM_FREQ, reg, offsetfreq); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_NOM_FREQ, STB0899_OFF0_CRL_NOM_FREQ, reg); + stb0899_dvbs2_reacquire(state); + internal->status = stb0899_dvbs2_get_fec_status(state, searchTime); + i++; + } + } + + if (internal->status != DVBS2_FEC_LOCK) { + if (internal->inversion == IQ_SWAP_AUTO) { + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_CNTRL2); + iqSpectrum = STB0899_GETFIELD(SPECTRUM_INVERT, reg); + /* IQ Spectrum Inversion */ + STB0899_SETFIELD_VAL(SPECTRUM_INVERT, reg, !iqSpectrum); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_DMD_CNTRL2, STB0899_OFF0_DMD_CNTRL2, reg); + /* start acquistion process */ + stb0899_dvbs2_reacquire(state); + + /* Wait for demod lock (UWP and CSM) */ + internal->status = stb0899_dvbs2_get_dmd_status(state, searchTime); + if (internal->status == DVBS2_DEMOD_LOCK) { + i = 0; + /* Demod Locked, check FEC */ + internal->status = stb0899_dvbs2_get_fec_status(state, FecLockTime); + /*try thrice for false locks, (UWP and CSM Locked but no FEC) */ + while ((internal->status != DVBS2_FEC_LOCK) && (i < 3)) { + /* Read the frequency offset*/ + offsetfreq = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_FREQ); + + /* Set the Nominal frequency to the found frequency offset for the next reacquire*/ + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_NOM_FREQ); + STB0899_SETFIELD_VAL(CRL_NOM_FREQ, reg, offsetfreq); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_NOM_FREQ, STB0899_OFF0_CRL_NOM_FREQ, reg); + + stb0899_dvbs2_reacquire(state); + internal->status = stb0899_dvbs2_get_fec_status(state, searchTime); + i++; + } + } +/* + if (pParams->DVBS2State == FE_DVBS2_FEC_LOCKED) + pParams->IQLocked = !iqSpectrum; +*/ + } + } + if (internal->status == DVBS2_FEC_LOCK) { + dprintk(state->verbose, FE_DEBUG, 1, "----------------> DVB-S2 FEC Lock !"); + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_STAT2); + modcod = STB0899_GETFIELD(UWP_DECODE_MOD, reg) >> 2; + pilots = STB0899_GETFIELD(UWP_DECODE_MOD, reg) & 0x01; + + if ((((10 * internal->master_clk) / (internal->srate / 10)) <= 410) && + (INRANGE(STB0899_QPSK_23, modcod, STB0899_QPSK_910)) && + (pilots == 1)) { + + stb0899_dvbs2_init_csm(state, pilots, modcod); + /* Wait for UWP,CSM and data LOCK 20ms max */ + internal->status = stb0899_dvbs2_get_fec_status(state, FecLockTime); + + i = 0; + while ((internal->status != DVBS2_FEC_LOCK) && (i < 3)) { + csm1 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1); + STB0899_SETFIELD_VAL(CSM_TWO_PASS, csm1, 1); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, csm1); + csm1 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1); + STB0899_SETFIELD_VAL(CSM_TWO_PASS, csm1, 0); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, csm1); + + internal->status = stb0899_dvbs2_get_fec_status(state, FecLockTime); + i++; + } + } + + if ((((10 * internal->master_clk) / (internal->srate / 10)) <= 410) && + (INRANGE(STB0899_QPSK_12, modcod, STB0899_QPSK_35)) && + (pilots == 1)) { + + /* Equalizer Disable update */ + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, EQ_CNTRL); + STB0899_SETFIELD_VAL(EQ_DISABLE_UPDATE, reg, 1); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQ_CNTRL, STB0899_OFF0_EQ_CNTRL, reg); + } + + /* slow down the Equalizer once locked */ + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, EQ_CNTRL); + STB0899_SETFIELD_VAL(EQ_SHIFT, reg, 0x02); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQ_CNTRL, STB0899_OFF0_EQ_CNTRL, reg); + + /* Store signal parameters */ + offsetfreq = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_FREQ); + + offsetfreq = offsetfreq / ((1 << 30) / 1000); + offsetfreq *= (internal->master_clk / 1000000); + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_CNTRL2); + if (STB0899_GETFIELD(SPECTRUM_INVERT, reg)) + offsetfreq *= -1; + + internal->freq = internal->freq - offsetfreq; + internal->srate = stb0899_dvbs2_get_srate(state); + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_STAT2); + internal->modcod = STB0899_GETFIELD(UWP_DECODE_MOD, reg) >> 2; + internal->pilots = STB0899_GETFIELD(UWP_DECODE_MOD, reg) & 0x01; + internal->frame_length = (STB0899_GETFIELD(UWP_DECODE_MOD, reg) >> 1) & 0x01; + + /* Set IF AGC to tracking */ + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL); + STB0899_SETFIELD_VAL(IF_LOOP_GAIN, reg, 3); + + /* if QPSK 1/2,QPSK 3/5 or QPSK 2/3 set IF AGC reference to 16 otherwise 32*/ + if (INRANGE(STB0899_QPSK_12, internal->modcod, STB0899_QPSK_23)) + STB0899_SETFIELD_VAL(IF_AGC_REF, reg, 16); + + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL, STB0899_OFF0_IF_AGC_CNTRL, reg); + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL2); + STB0899_SETFIELD_VAL(IF_AGC_DUMP_PER, reg, 7); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL2, STB0899_OFF0_IF_AGC_CNTRL2, reg); + } + + /* Release Stream Merger Reset */ + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESRS, reg, 0); + stb0899_write_reg(state, STB0899_TSTRES, reg); + + return internal->status; +} diff --git a/drivers/media/dvb-frontends/stb0899_cfg.h b/drivers/media/dvb-frontends/stb0899_cfg.h new file mode 100644 index 00000000..0867906d --- /dev/null +++ b/drivers/media/dvb-frontends/stb0899_cfg.h @@ -0,0 +1,287 @@ +/* + STB0899 Multistandard Frontend driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STB0899_CFG_H +#define __STB0899_CFG_H + +static const struct stb0899_s2_reg stb0899_s2_init_2[] = { + + { STB0899_OFF0_DMD_STATUS , STB0899_BASE_DMD_STATUS , 0x00000103 }, /* DMDSTATUS */ + { STB0899_OFF0_CRL_FREQ , STB0899_BASE_CRL_FREQ , 0x3ed1da56 }, /* CRLFREQ */ + { STB0899_OFF0_BTR_FREQ , STB0899_BASE_BTR_FREQ , 0x00004000 }, /* BTRFREQ */ + { STB0899_OFF0_IF_AGC_GAIN , STB0899_BASE_IF_AGC_GAIN , 0x00002ade }, /* IFAGCGAIN */ + { STB0899_OFF0_BB_AGC_GAIN , STB0899_BASE_BB_AGC_GAIN , 0x000001bc }, /* BBAGCGAIN */ + { STB0899_OFF0_DC_OFFSET , STB0899_BASE_DC_OFFSET , 0x00000200 }, /* DCOFFSET */ + { STB0899_OFF0_DMD_CNTRL , STB0899_BASE_DMD_CNTRL , 0x0000000f }, /* DMDCNTRL */ + + { STB0899_OFF0_IF_AGC_CNTRL , STB0899_BASE_IF_AGC_CNTRL , 0x03fb4a20 }, /* IFAGCCNTRL */ + { STB0899_OFF0_BB_AGC_CNTRL , STB0899_BASE_BB_AGC_CNTRL , 0x00200c97 }, /* BBAGCCNTRL */ + + { STB0899_OFF0_CRL_CNTRL , STB0899_BASE_CRL_CNTRL , 0x00000016 }, /* CRLCNTRL */ + { STB0899_OFF0_CRL_PHS_INIT , STB0899_BASE_CRL_PHS_INIT , 0x00000000 }, /* CRLPHSINIT */ + { STB0899_OFF0_CRL_FREQ_INIT , STB0899_BASE_CRL_FREQ_INIT , 0x00000000 }, /* CRLFREQINIT */ + { STB0899_OFF0_CRL_LOOP_GAIN , STB0899_BASE_CRL_LOOP_GAIN , 0x00000000 }, /* CRLLOOPGAIN */ + { STB0899_OFF0_CRL_NOM_FREQ , STB0899_BASE_CRL_NOM_FREQ , 0x3ed097b6 }, /* CRLNOMFREQ */ + { STB0899_OFF0_CRL_SWP_RATE , STB0899_BASE_CRL_SWP_RATE , 0x00000000 }, /* CRLSWPRATE */ + { STB0899_OFF0_CRL_MAX_SWP , STB0899_BASE_CRL_MAX_SWP , 0x00000000 }, /* CRLMAXSWP */ + { STB0899_OFF0_CRL_LK_CNTRL , STB0899_BASE_CRL_LK_CNTRL , 0x0f6cdc01 }, /* CRLLKCNTRL */ + { STB0899_OFF0_DECIM_CNTRL , STB0899_BASE_DECIM_CNTRL , 0x00000000 }, /* DECIMCNTRL */ + { STB0899_OFF0_BTR_CNTRL , STB0899_BASE_BTR_CNTRL , 0x00003993 }, /* BTRCNTRL */ + { STB0899_OFF0_BTR_LOOP_GAIN , STB0899_BASE_BTR_LOOP_GAIN , 0x000d3c6f }, /* BTRLOOPGAIN */ + { STB0899_OFF0_BTR_PHS_INIT , STB0899_BASE_BTR_PHS_INIT , 0x00000000 }, /* BTRPHSINIT */ + { STB0899_OFF0_BTR_FREQ_INIT , STB0899_BASE_BTR_FREQ_INIT , 0x00000000 }, /* BTRFREQINIT */ + { STB0899_OFF0_BTR_NOM_FREQ , STB0899_BASE_BTR_NOM_FREQ , 0x0238e38e }, /* BTRNOMFREQ */ + { STB0899_OFF0_BTR_LK_CNTRL , STB0899_BASE_BTR_LK_CNTRL , 0x00000000 }, /* BTRLKCNTRL */ + { STB0899_OFF0_DECN_CNTRL , STB0899_BASE_DECN_CNTRL , 0x00000000 }, /* DECNCNTRL */ + { STB0899_OFF0_TP_CNTRL , STB0899_BASE_TP_CNTRL , 0x00000000 }, /* TPCNTRL */ + { STB0899_OFF0_TP_BUF_STATUS , STB0899_BASE_TP_BUF_STATUS , 0x00000000 }, /* TPBUFSTATUS */ + { STB0899_OFF0_DC_ESTIM , STB0899_BASE_DC_ESTIM , 0x00000000 }, /* DCESTIM */ + { STB0899_OFF0_FLL_CNTRL , STB0899_BASE_FLL_CNTRL , 0x00000000 }, /* FLLCNTRL */ + { STB0899_OFF0_FLL_FREQ_WD , STB0899_BASE_FLL_FREQ_WD , 0x40070000 }, /* FLLFREQWD */ + { STB0899_OFF0_ANTI_ALIAS_SEL , STB0899_BASE_ANTI_ALIAS_SEL , 0x00000001 }, /* ANTIALIASSEL */ + { STB0899_OFF0_RRC_ALPHA , STB0899_BASE_RRC_ALPHA , 0x00000002 }, /* RRCALPHA */ + { STB0899_OFF0_DC_ADAPT_LSHFT , STB0899_BASE_DC_ADAPT_LSHFT , 0x00000000 }, /* DCADAPTISHFT */ + { STB0899_OFF0_IMB_OFFSET , STB0899_BASE_IMB_OFFSET , 0x0000fe01 }, /* IMBOFFSET */ + { STB0899_OFF0_IMB_ESTIMATE , STB0899_BASE_IMB_ESTIMATE , 0x00000000 }, /* IMBESTIMATE */ + { STB0899_OFF0_IMB_CNTRL , STB0899_BASE_IMB_CNTRL , 0x00000001 }, /* IMBCNTRL */ + { STB0899_OFF0_IF_AGC_CNTRL2 , STB0899_BASE_IF_AGC_CNTRL2 , 0x00005007 }, /* IFAGCCNTRL2 */ + { STB0899_OFF0_DMD_CNTRL2 , STB0899_BASE_DMD_CNTRL2 , 0x00000002 }, /* DMDCNTRL2 */ + { STB0899_OFF0_TP_BUFFER , STB0899_BASE_TP_BUFFER , 0x00000000 }, /* TPBUFFER */ + { STB0899_OFF0_TP_BUFFER1 , STB0899_BASE_TP_BUFFER1 , 0x00000000 }, /* TPBUFFER1 */ + { STB0899_OFF0_TP_BUFFER2 , STB0899_BASE_TP_BUFFER2 , 0x00000000 }, /* TPBUFFER2 */ + { STB0899_OFF0_TP_BUFFER3 , STB0899_BASE_TP_BUFFER3 , 0x00000000 }, /* TPBUFFER3 */ + { STB0899_OFF0_TP_BUFFER4 , STB0899_BASE_TP_BUFFER4 , 0x00000000 }, /* TPBUFFER4 */ + { STB0899_OFF0_TP_BUFFER5 , STB0899_BASE_TP_BUFFER5 , 0x00000000 }, /* TPBUFFER5 */ + { STB0899_OFF0_TP_BUFFER6 , STB0899_BASE_TP_BUFFER6 , 0x00000000 }, /* TPBUFFER6 */ + { STB0899_OFF0_TP_BUFFER7 , STB0899_BASE_TP_BUFFER7 , 0x00000000 }, /* TPBUFFER7 */ + { STB0899_OFF0_TP_BUFFER8 , STB0899_BASE_TP_BUFFER8 , 0x00000000 }, /* TPBUFFER8 */ + { STB0899_OFF0_TP_BUFFER9 , STB0899_BASE_TP_BUFFER9 , 0x00000000 }, /* TPBUFFER9 */ + { STB0899_OFF0_TP_BUFFER10 , STB0899_BASE_TP_BUFFER10 , 0x00000000 }, /* TPBUFFER10 */ + { STB0899_OFF0_TP_BUFFER11 , STB0899_BASE_TP_BUFFER11 , 0x00000000 }, /* TPBUFFER11 */ + { STB0899_OFF0_TP_BUFFER12 , STB0899_BASE_TP_BUFFER12 , 0x00000000 }, /* TPBUFFER12 */ + { STB0899_OFF0_TP_BUFFER13 , STB0899_BASE_TP_BUFFER13 , 0x00000000 }, /* TPBUFFER13 */ + { STB0899_OFF0_TP_BUFFER14 , STB0899_BASE_TP_BUFFER14 , 0x00000000 }, /* TPBUFFER14 */ + { STB0899_OFF0_TP_BUFFER15 , STB0899_BASE_TP_BUFFER15 , 0x00000000 }, /* TPBUFFER15 */ + { STB0899_OFF0_TP_BUFFER16 , STB0899_BASE_TP_BUFFER16 , 0x0000ff00 }, /* TPBUFFER16 */ + { STB0899_OFF0_TP_BUFFER17 , STB0899_BASE_TP_BUFFER17 , 0x00000100 }, /* TPBUFFER17 */ + { STB0899_OFF0_TP_BUFFER18 , STB0899_BASE_TP_BUFFER18 , 0x0000fe01 }, /* TPBUFFER18 */ + { STB0899_OFF0_TP_BUFFER19 , STB0899_BASE_TP_BUFFER19 , 0x000004fe }, /* TPBUFFER19 */ + { STB0899_OFF0_TP_BUFFER20 , STB0899_BASE_TP_BUFFER20 , 0x0000cfe7 }, /* TPBUFFER20 */ + { STB0899_OFF0_TP_BUFFER21 , STB0899_BASE_TP_BUFFER21 , 0x0000bec6 }, /* TPBUFFER21 */ + { STB0899_OFF0_TP_BUFFER22 , STB0899_BASE_TP_BUFFER22 , 0x0000c2bf }, /* TPBUFFER22 */ + { STB0899_OFF0_TP_BUFFER23 , STB0899_BASE_TP_BUFFER23 , 0x0000c1c1 }, /* TPBUFFER23 */ + { STB0899_OFF0_TP_BUFFER24 , STB0899_BASE_TP_BUFFER24 , 0x0000c1c1 }, /* TPBUFFER24 */ + { STB0899_OFF0_TP_BUFFER25 , STB0899_BASE_TP_BUFFER25 , 0x0000c1c1 }, /* TPBUFFER25 */ + { STB0899_OFF0_TP_BUFFER26 , STB0899_BASE_TP_BUFFER26 , 0x0000c1c1 }, /* TPBUFFER26 */ + { STB0899_OFF0_TP_BUFFER27 , STB0899_BASE_TP_BUFFER27 , 0x0000c1c0 }, /* TPBUFFER27 */ + { STB0899_OFF0_TP_BUFFER28 , STB0899_BASE_TP_BUFFER28 , 0x0000c0c0 }, /* TPBUFFER28 */ + { STB0899_OFF0_TP_BUFFER29 , STB0899_BASE_TP_BUFFER29 , 0x0000c1c1 }, /* TPBUFFER29 */ + { STB0899_OFF0_TP_BUFFER30 , STB0899_BASE_TP_BUFFER30 , 0x0000c1c1 }, /* TPBUFFER30 */ + { STB0899_OFF0_TP_BUFFER31 , STB0899_BASE_TP_BUFFER31 , 0x0000c0c1 }, /* TPBUFFER31 */ + { STB0899_OFF0_TP_BUFFER32 , STB0899_BASE_TP_BUFFER32 , 0x0000c0c1 }, /* TPBUFFER32 */ + { STB0899_OFF0_TP_BUFFER33 , STB0899_BASE_TP_BUFFER33 , 0x0000c1c1 }, /* TPBUFFER33 */ + { STB0899_OFF0_TP_BUFFER34 , STB0899_BASE_TP_BUFFER34 , 0x0000c1c1 }, /* TPBUFFER34 */ + { STB0899_OFF0_TP_BUFFER35 , STB0899_BASE_TP_BUFFER35 , 0x0000c0c1 }, /* TPBUFFER35 */ + { STB0899_OFF0_TP_BUFFER36 , STB0899_BASE_TP_BUFFER36 , 0x0000c1c1 }, /* TPBUFFER36 */ + { STB0899_OFF0_TP_BUFFER37 , STB0899_BASE_TP_BUFFER37 , 0x0000c0c1 }, /* TPBUFFER37 */ + { STB0899_OFF0_TP_BUFFER38 , STB0899_BASE_TP_BUFFER38 , 0x0000c1c1 }, /* TPBUFFER38 */ + { STB0899_OFF0_TP_BUFFER39 , STB0899_BASE_TP_BUFFER39 , 0x0000c0c0 }, /* TPBUFFER39 */ + { STB0899_OFF0_TP_BUFFER40 , STB0899_BASE_TP_BUFFER40 , 0x0000c1c0 }, /* TPBUFFER40 */ + { STB0899_OFF0_TP_BUFFER41 , STB0899_BASE_TP_BUFFER41 , 0x0000c1c1 }, /* TPBUFFER41 */ + { STB0899_OFF0_TP_BUFFER42 , STB0899_BASE_TP_BUFFER42 , 0x0000c0c0 }, /* TPBUFFER42 */ + { STB0899_OFF0_TP_BUFFER43 , STB0899_BASE_TP_BUFFER43 , 0x0000c1c0 }, /* TPBUFFER43 */ + { STB0899_OFF0_TP_BUFFER44 , STB0899_BASE_TP_BUFFER44 , 0x0000c0c1 }, /* TPBUFFER44 */ + { STB0899_OFF0_TP_BUFFER45 , STB0899_BASE_TP_BUFFER45 , 0x0000c1be }, /* TPBUFFER45 */ + { STB0899_OFF0_TP_BUFFER46 , STB0899_BASE_TP_BUFFER46 , 0x0000c1c9 }, /* TPBUFFER46 */ + { STB0899_OFF0_TP_BUFFER47 , STB0899_BASE_TP_BUFFER47 , 0x0000c0da }, /* TPBUFFER47 */ + { STB0899_OFF0_TP_BUFFER48 , STB0899_BASE_TP_BUFFER48 , 0x0000c0ba }, /* TPBUFFER48 */ + { STB0899_OFF0_TP_BUFFER49 , STB0899_BASE_TP_BUFFER49 , 0x0000c1c4 }, /* TPBUFFER49 */ + { STB0899_OFF0_TP_BUFFER50 , STB0899_BASE_TP_BUFFER50 , 0x0000c1bf }, /* TPBUFFER50 */ + { STB0899_OFF0_TP_BUFFER51 , STB0899_BASE_TP_BUFFER51 , 0x0000c0c1 }, /* TPBUFFER51 */ + { STB0899_OFF0_TP_BUFFER52 , STB0899_BASE_TP_BUFFER52 , 0x0000c1c0 }, /* TPBUFFER52 */ + { STB0899_OFF0_TP_BUFFER53 , STB0899_BASE_TP_BUFFER53 , 0x0000c0c1 }, /* TPBUFFER53 */ + { STB0899_OFF0_TP_BUFFER54 , STB0899_BASE_TP_BUFFER54 , 0x0000c1c1 }, /* TPBUFFER54 */ + { STB0899_OFF0_TP_BUFFER55 , STB0899_BASE_TP_BUFFER55 , 0x0000c1c1 }, /* TPBUFFER55 */ + { STB0899_OFF0_TP_BUFFER56 , STB0899_BASE_TP_BUFFER56 , 0x0000c1c1 }, /* TPBUFFER56 */ + { STB0899_OFF0_TP_BUFFER57 , STB0899_BASE_TP_BUFFER57 , 0x0000c1c1 }, /* TPBUFFER57 */ + { STB0899_OFF0_TP_BUFFER58 , STB0899_BASE_TP_BUFFER58 , 0x0000c1c1 }, /* TPBUFFER58 */ + { STB0899_OFF0_TP_BUFFER59 , STB0899_BASE_TP_BUFFER59 , 0x0000c1c1 }, /* TPBUFFER59 */ + { STB0899_OFF0_TP_BUFFER60 , STB0899_BASE_TP_BUFFER60 , 0x0000c1c1 }, /* TPBUFFER60 */ + { STB0899_OFF0_TP_BUFFER61 , STB0899_BASE_TP_BUFFER61 , 0x0000c1c1 }, /* TPBUFFER61 */ + { STB0899_OFF0_TP_BUFFER62 , STB0899_BASE_TP_BUFFER62 , 0x0000c1c1 }, /* TPBUFFER62 */ + { STB0899_OFF0_TP_BUFFER63 , STB0899_BASE_TP_BUFFER63 , 0x0000c1c0 }, /* TPBUFFER63 */ + { STB0899_OFF0_RESET_CNTRL , STB0899_BASE_RESET_CNTRL , 0x00000001 }, /* RESETCNTRL */ + { STB0899_OFF0_ACM_ENABLE , STB0899_BASE_ACM_ENABLE , 0x00005654 }, /* ACMENABLE */ + { STB0899_OFF0_DESCR_CNTRL , STB0899_BASE_DESCR_CNTRL , 0x00000000 }, /* DESCRCNTRL */ + { STB0899_OFF0_CSM_CNTRL1 , STB0899_BASE_CSM_CNTRL1 , 0x00020019 }, /* CSMCNTRL1 */ + { STB0899_OFF0_CSM_CNTRL2 , STB0899_BASE_CSM_CNTRL2 , 0x004b3237 }, /* CSMCNTRL2 */ + { STB0899_OFF0_CSM_CNTRL3 , STB0899_BASE_CSM_CNTRL3 , 0x0003dd17 }, /* CSMCNTRL3 */ + { STB0899_OFF0_CSM_CNTRL4 , STB0899_BASE_CSM_CNTRL4 , 0x00008008 }, /* CSMCNTRL4 */ + { STB0899_OFF0_UWP_CNTRL1 , STB0899_BASE_UWP_CNTRL1 , 0x002a3106 }, /* UWPCNTRL1 */ + { STB0899_OFF0_UWP_CNTRL2 , STB0899_BASE_UWP_CNTRL2 , 0x0006140a }, /* UWPCNTRL2 */ + { STB0899_OFF0_UWP_STAT1 , STB0899_BASE_UWP_STAT1 , 0x00008000 }, /* UWPSTAT1 */ + { STB0899_OFF0_UWP_STAT2 , STB0899_BASE_UWP_STAT2 , 0x00000000 }, /* UWPSTAT2 */ + { STB0899_OFF0_DMD_STAT2 , STB0899_BASE_DMD_STAT2 , 0x00000000 }, /* DMDSTAT2 */ + { STB0899_OFF0_FREQ_ADJ_SCALE , STB0899_BASE_FREQ_ADJ_SCALE , 0x00000471 }, /* FREQADJSCALE */ + { STB0899_OFF0_UWP_CNTRL3 , STB0899_BASE_UWP_CNTRL3 , 0x017b0465 }, /* UWPCNTRL3 */ + { STB0899_OFF0_SYM_CLK_SEL , STB0899_BASE_SYM_CLK_SEL , 0x00000002 }, /* SYMCLKSEL */ + { STB0899_OFF0_SOF_SRCH_TO , STB0899_BASE_SOF_SRCH_TO , 0x00196464 }, /* SOFSRCHTO */ + { STB0899_OFF0_ACQ_CNTRL1 , STB0899_BASE_ACQ_CNTRL1 , 0x00000603 }, /* ACQCNTRL1 */ + { STB0899_OFF0_ACQ_CNTRL2 , STB0899_BASE_ACQ_CNTRL2 , 0x02046666 }, /* ACQCNTRL2 */ + { STB0899_OFF0_ACQ_CNTRL3 , STB0899_BASE_ACQ_CNTRL3 , 0x10046583 }, /* ACQCNTRL3 */ + { STB0899_OFF0_FE_SETTLE , STB0899_BASE_FE_SETTLE , 0x00010404 }, /* FESETTLE */ + { STB0899_OFF0_AC_DWELL , STB0899_BASE_AC_DWELL , 0x0002aa8a }, /* ACDWELL */ + { STB0899_OFF0_ACQUIRE_TRIG , STB0899_BASE_ACQUIRE_TRIG , 0x00000000 }, /* ACQUIRETRIG */ + { STB0899_OFF0_LOCK_LOST , STB0899_BASE_LOCK_LOST , 0x00000001 }, /* LOCKLOST */ + { STB0899_OFF0_ACQ_STAT1 , STB0899_BASE_ACQ_STAT1 , 0x00000500 }, /* ACQSTAT1 */ + { STB0899_OFF0_ACQ_TIMEOUT , STB0899_BASE_ACQ_TIMEOUT , 0x0028a0a0 }, /* ACQTIMEOUT */ + { STB0899_OFF0_ACQ_TIME , STB0899_BASE_ACQ_TIME , 0x00000000 }, /* ACQTIME */ + { STB0899_OFF0_FINAL_AGC_CNTRL , STB0899_BASE_FINAL_AGC_CNTRL , 0x00800c17 }, /* FINALAGCCNTRL*/ + { STB0899_OFF0_FINAL_AGC_GAIN , STB0899_BASE_FINAL_AGC_GAIN , 0x00000000 }, /* FINALAGCCGAIN*/ + { STB0899_OFF0_EQUALIZER_INIT , STB0899_BASE_EQUALIZER_INIT , 0x00000000 }, /* EQUILIZERINIT*/ + { STB0899_OFF0_EQ_CNTRL , STB0899_BASE_EQ_CNTRL , 0x00054802 }, /* EQCNTL */ + { STB0899_OFF0_EQ_I_INIT_COEFF_0, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF0 */ + { STB0899_OFF1_EQ_I_INIT_COEFF_1, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF1 */ + { STB0899_OFF2_EQ_I_INIT_COEFF_2, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF2 */ + { STB0899_OFF3_EQ_I_INIT_COEFF_3, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF3 */ + { STB0899_OFF4_EQ_I_INIT_COEFF_4, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF4 */ + { STB0899_OFF5_EQ_I_INIT_COEFF_5, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000400 }, /* EQIINITCOEFF5 */ + { STB0899_OFF6_EQ_I_INIT_COEFF_6, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF6 */ + { STB0899_OFF7_EQ_I_INIT_COEFF_7, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF7 */ + { STB0899_OFF8_EQ_I_INIT_COEFF_8, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF8 */ + { STB0899_OFF9_EQ_I_INIT_COEFF_9, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF9 */ + { STB0899_OFFa_EQ_I_INIT_COEFF_10,STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 }, /* EQIINITCOEFF10*/ + { STB0899_OFF0_EQ_Q_INIT_COEFF_0, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF0 */ + { STB0899_OFF1_EQ_Q_INIT_COEFF_1, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF1 */ + { STB0899_OFF2_EQ_Q_INIT_COEFF_2, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF2 */ + { STB0899_OFF3_EQ_Q_INIT_COEFF_3, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF3 */ + { STB0899_OFF4_EQ_Q_INIT_COEFF_4, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF4 */ + { STB0899_OFF5_EQ_Q_INIT_COEFF_5, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF5 */ + { STB0899_OFF6_EQ_Q_INIT_COEFF_6, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF6 */ + { STB0899_OFF7_EQ_Q_INIT_COEFF_7, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF7 */ + { STB0899_OFF8_EQ_Q_INIT_COEFF_8, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF8 */ + { STB0899_OFF9_EQ_Q_INIT_COEFF_9, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF9 */ + { STB0899_OFFa_EQ_Q_INIT_COEFF_10,STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 }, /* EQQINITCOEFF10*/ + { STB0899_OFF0_EQ_I_OUT_COEFF_0 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT0 */ + { STB0899_OFF1_EQ_I_OUT_COEFF_1 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT1 */ + { STB0899_OFF2_EQ_I_OUT_COEFF_2 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT2 */ + { STB0899_OFF3_EQ_I_OUT_COEFF_3 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT3 */ + { STB0899_OFF4_EQ_I_OUT_COEFF_4 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT4 */ + { STB0899_OFF5_EQ_I_OUT_COEFF_5 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT5 */ + { STB0899_OFF6_EQ_I_OUT_COEFF_6 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT6 */ + { STB0899_OFF7_EQ_I_OUT_COEFF_7 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT7 */ + { STB0899_OFF8_EQ_I_OUT_COEFF_8 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT8 */ + { STB0899_OFF9_EQ_I_OUT_COEFF_9 , STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT9 */ + { STB0899_OFFa_EQ_I_OUT_COEFF_10,STB0899_BASE_EQ_I_OUT_COEFF_N , 0x00000000 }, /* EQICOEFFSOUT10*/ + { STB0899_OFF0_EQ_Q_OUT_COEFF_0 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT0 */ + { STB0899_OFF1_EQ_Q_OUT_COEFF_1 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT1 */ + { STB0899_OFF2_EQ_Q_OUT_COEFF_2 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT2 */ + { STB0899_OFF3_EQ_Q_OUT_COEFF_3 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT3 */ + { STB0899_OFF4_EQ_Q_OUT_COEFF_4 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT4 */ + { STB0899_OFF5_EQ_Q_OUT_COEFF_5 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT5 */ + { STB0899_OFF6_EQ_Q_OUT_COEFF_6 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT6 */ + { STB0899_OFF7_EQ_Q_OUT_COEFF_7 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT7 */ + { STB0899_OFF8_EQ_Q_OUT_COEFF_8 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT8 */ + { STB0899_OFF9_EQ_Q_OUT_COEFF_9 , STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT9 */ + { STB0899_OFFa_EQ_Q_OUT_COEFF_10, STB0899_BASE_EQ_Q_OUT_COEFF_N , 0x00000000 }, /* EQQCOEFFSOUT10*/ + { 0xffff , 0xffffffff , 0xffffffff }, +}; +static const struct stb0899_s2_reg stb0899_s2_init_4[] = { + { STB0899_OFF0_BLOCK_LNGTH , STB0899_BASE_BLOCK_LNGTH , 0x00000008 }, /* BLOCKLNGTH */ + { STB0899_OFF0_ROW_STR , STB0899_BASE_ROW_STR , 0x000000b4 }, /* ROWSTR */ + { STB0899_OFF0_BN_END_ADDR , STB0899_BASE_BN_END_ADDR , 0x000004b5 }, /* BNANDADDR */ + { STB0899_OFF0_CN_END_ADDR , STB0899_BASE_CN_END_ADDR , 0x00000b4b }, /* CNANDADDR */ + { STB0899_OFF0_INFO_LENGTH , STB0899_BASE_INFO_LENGTH , 0x00000078 }, /* INFOLENGTH */ + { STB0899_OFF0_BOT_ADDR , STB0899_BASE_BOT_ADDR , 0x000001e0 }, /* BOT_ADDR */ + { STB0899_OFF0_BCH_BLK_LN , STB0899_BASE_BCH_BLK_LN , 0x0000a8c0 }, /* BCHBLKLN */ + { STB0899_OFF0_BCH_T , STB0899_BASE_BCH_T , 0x0000000c }, /* BCHT */ + { STB0899_OFF0_CNFG_MODE , STB0899_BASE_CNFG_MODE , 0x00000001 }, /* CNFGMODE */ + { STB0899_OFF0_LDPC_STAT , STB0899_BASE_LDPC_STAT , 0x0000000d }, /* LDPCSTAT */ + { STB0899_OFF0_ITER_SCALE , STB0899_BASE_ITER_SCALE , 0x00000040 }, /* ITERSCALE */ + { STB0899_OFF0_INPUT_MODE , STB0899_BASE_INPUT_MODE , 0x00000000 }, /* INPUTMODE */ + { STB0899_OFF0_LDPCDECRST , STB0899_BASE_LDPCDECRST , 0x00000000 }, /* LDPCDECRST */ + { STB0899_OFF0_CLK_PER_BYTE_RW , STB0899_BASE_CLK_PER_BYTE_RW , 0x00000008 }, /* CLKPERBYTE */ + { STB0899_OFF0_BCH_ERRORS , STB0899_BASE_BCH_ERRORS , 0x00000000 }, /* BCHERRORS */ + { STB0899_OFF0_LDPC_ERRORS , STB0899_BASE_LDPC_ERRORS , 0x00000000 }, /* LDPCERRORS */ + { STB0899_OFF0_BCH_MODE , STB0899_BASE_BCH_MODE , 0x00000000 }, /* BCHMODE */ + { STB0899_OFF0_ERR_ACC_PER , STB0899_BASE_ERR_ACC_PER , 0x00000008 }, /* ERRACCPER */ + { STB0899_OFF0_BCH_ERR_ACC , STB0899_BASE_BCH_ERR_ACC , 0x00000000 }, /* BCHERRACC */ + { STB0899_OFF0_FEC_TP_SEL , STB0899_BASE_FEC_TP_SEL , 0x00000000 }, /* FECTPSEL */ + { 0xffff , 0xffffffff , 0xffffffff }, +}; + +static const struct stb0899_s1_reg stb0899_s1_init_5[] = { + { STB0899_TSTCK , 0x00 }, + { STB0899_TSTRES , 0x00 }, + { STB0899_TSTOUT , 0x00 }, + { STB0899_TSTIN , 0x00 }, + { STB0899_TSTSYS , 0x00 }, + { STB0899_TSTCHIP , 0x00 }, + { STB0899_TSTFREE , 0x00 }, + { STB0899_TSTI2C , 0x00 }, + { STB0899_BITSPEEDM , 0x00 }, + { STB0899_BITSPEEDL , 0x00 }, + { STB0899_TBUSBIT , 0x00 }, + { STB0899_TSTDIS , 0x00 }, + { STB0899_TSTDISRX , 0x00 }, + { STB0899_TSTJETON , 0x00 }, + { STB0899_TSTDCADJ , 0x00 }, + { STB0899_TSTAGC1 , 0x00 }, + { STB0899_TSTAGC1N , 0x00 }, + { STB0899_TSTPOLYPH , 0x00 }, + { STB0899_TSTR , 0x00 }, + { STB0899_TSTAGC2 , 0x00 }, + { STB0899_TSTCTL1 , 0x00 }, + { STB0899_TSTCTL2 , 0x00 }, + { STB0899_TSTCTL3 , 0x00 }, + { STB0899_TSTDEMAP , 0x00 }, + { STB0899_TSTDEMAP2 , 0x00 }, + { STB0899_TSTDEMMON , 0x00 }, + { STB0899_TSTRATE , 0x00 }, + { STB0899_TSTSELOUT , 0x00 }, + { STB0899_TSYNC , 0x00 }, + { STB0899_TSTERR , 0x00 }, + { STB0899_TSTRAM1 , 0x00 }, + { STB0899_TSTVSELOUT , 0x00 }, + { STB0899_TSTFORCEIN , 0x00 }, + { STB0899_TSTRS1 , 0x00 }, + { STB0899_TSTRS2 , 0x00 }, + { STB0899_TSTRS3 , 0x00 }, + { STB0899_GHOSTREG , 0x81 }, + { 0xffff , 0xff }, +}; + +#define STB0899_DVBS2_ESNO_AVE 3 +#define STB0899_DVBS2_ESNO_QUANT 32 +#define STB0899_DVBS2_AVFRAMES_COARSE 10 +#define STB0899_DVBS2_AVFRAMES_FINE 20 +#define STB0899_DVBS2_MISS_THRESHOLD 6 +#define STB0899_DVBS2_UWP_THRESHOLD_ACQ 1125 +#define STB0899_DVBS2_UWP_THRESHOLD_TRACK 758 +#define STB0899_DVBS2_UWP_THRESHOLD_SOF 1350 +#define STB0899_DVBS2_SOF_SEARCH_TIMEOUT 1664100 + +#define STB0899_DVBS2_BTR_NCO_BITS 28 +#define STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET 15 +#define STB0899_DVBS2_CRL_NCO_BITS 30 +#define STB0899_DVBS2_LDPC_MAX_ITER 70 + +#endif //__STB0899_CFG_H diff --git a/drivers/media/dvb-frontends/stb0899_drv.c b/drivers/media/dvb-frontends/stb0899_drv.c new file mode 100644 index 00000000..2a979cfa --- /dev/null +++ b/drivers/media/dvb-frontends/stb0899_drv.c @@ -0,0 +1,1662 @@ +/* + STB0899 Multistandard Frontend driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include + +#include +#include "dvb_frontend.h" + +#include "stb0899_drv.h" +#include "stb0899_priv.h" +#include "stb0899_reg.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +static unsigned int verbose = 0;//1; +module_param(verbose, int, 0644); + +/* C/N in dB/10, NIRM/NIRL */ +static const struct stb0899_tab stb0899_cn_tab[] = { + { 200, 2600 }, + { 190, 2700 }, + { 180, 2860 }, + { 170, 3020 }, + { 160, 3210 }, + { 150, 3440 }, + { 140, 3710 }, + { 130, 4010 }, + { 120, 4360 }, + { 110, 4740 }, + { 100, 5190 }, + { 90, 5670 }, + { 80, 6200 }, + { 70, 6770 }, + { 60, 7360 }, + { 50, 7970 }, + { 40, 8250 }, + { 30, 9000 }, + { 20, 9450 }, + { 15, 9600 }, +}; + +/* DVB-S AGCIQ_VALUE vs. signal level in dBm/10. + * As measured, connected to a modulator. + * -8.0 to -50.0 dBm directly connected, + * -52.0 to -74.8 with extra attenuation. + * Cut-off to AGCIQ_VALUE = 0x80 below -74.8dBm. + * Crude linear extrapolation below -84.8dBm and above -8.0dBm. + */ +static const struct stb0899_tab stb0899_dvbsrf_tab[] = { + { -750, -128 }, + { -748, -94 }, + { -745, -92 }, + { -735, -90 }, + { -720, -87 }, + { -670, -77 }, + { -640, -70 }, + { -610, -62 }, + { -600, -60 }, + { -590, -56 }, + { -560, -41 }, + { -540, -25 }, + { -530, -17 }, + { -520, -11 }, + { -500, 1 }, + { -490, 6 }, + { -480, 10 }, + { -440, 22 }, + { -420, 27 }, + { -400, 31 }, + { -380, 34 }, + { -340, 40 }, + { -320, 43 }, + { -280, 48 }, + { -250, 52 }, + { -230, 55 }, + { -180, 61 }, + { -140, 66 }, + { -90, 73 }, + { -80, 74 }, + { 500, 127 } +}; + +/* DVB-S2 IF_AGC_GAIN vs. signal level in dBm/10. + * As measured, connected to a modulator. + * -8.0 to -50.1 dBm directly connected, + * -53.0 to -76.6 with extra attenuation. + * Cut-off to IF_AGC_GAIN = 0x3fff below -76.6dBm. + * Crude linear extrapolation below -76.6dBm and above -8.0dBm. + */ +static const struct stb0899_tab stb0899_dvbs2rf_tab[] = { + { 700, 0 }, + { -80, 3217 }, + { -150, 3893 }, + { -190, 4217 }, + { -240, 4621 }, + { -280, 4945 }, + { -320, 5273 }, + { -350, 5545 }, + { -370, 5741 }, + { -410, 6147 }, + { -450, 6671 }, + { -490, 7413 }, + { -501, 7665 }, + { -530, 8767 }, + { -560, 10219 }, + { -580, 10939 }, + { -590, 11518 }, + { -600, 11723 }, + { -650, 12659 }, + { -690, 13219 }, + { -730, 13645 }, + { -750, 13909 }, + { -766, 14153 }, + { -950, 16383 } +}; + +/* DVB-S2 Es/N0 quant in dB/100 vs read value * 100*/ +static struct stb0899_tab stb0899_quant_tab[] = { + { 0, 0 }, + { 0, 100 }, + { 600, 200 }, + { 950, 299 }, + { 1200, 398 }, + { 1400, 501 }, + { 1560, 603 }, + { 1690, 700 }, + { 1810, 804 }, + { 1910, 902 }, + { 2000, 1000 }, + { 2080, 1096 }, + { 2160, 1202 }, + { 2230, 1303 }, + { 2350, 1496 }, + { 2410, 1603 }, + { 2460, 1698 }, + { 2510, 1799 }, + { 2600, 1995 }, + { 2650, 2113 }, + { 2690, 2213 }, + { 2720, 2291 }, + { 2760, 2399 }, + { 2800, 2512 }, + { 2860, 2692 }, + { 2930, 2917 }, + { 2960, 3020 }, + { 3010, 3199 }, + { 3040, 3311 }, + { 3060, 3388 }, + { 3120, 3631 }, + { 3190, 3936 }, + { 3400, 5012 }, + { 3610, 6383 }, + { 3800, 7943 }, + { 4210, 12735 }, + { 4500, 17783 }, + { 4690, 22131 }, + { 4810, 25410 } +}; + +/* DVB-S2 Es/N0 estimate in dB/100 vs read value */ +static struct stb0899_tab stb0899_est_tab[] = { + { 0, 0 }, + { 0, 1 }, + { 301, 2 }, + { 1204, 16 }, + { 1806, 64 }, + { 2408, 256 }, + { 2709, 512 }, + { 3010, 1023 }, + { 3311, 2046 }, + { 3612, 4093 }, + { 3823, 6653 }, + { 3913, 8185 }, + { 4010, 10233 }, + { 4107, 12794 }, + { 4214, 16368 }, + { 4266, 18450 }, + { 4311, 20464 }, + { 4353, 22542 }, + { 4391, 24604 }, + { 4425, 26607 }, + { 4457, 28642 }, + { 4487, 30690 }, + { 4515, 32734 }, + { 4612, 40926 }, + { 4692, 49204 }, + { 4816, 65464 }, + { 4913, 81846 }, + { 4993, 98401 }, + { 5060, 114815 }, + { 5118, 131220 }, + { 5200, 158489 }, + { 5300, 199526 }, + { 5400, 251189 }, + { 5500, 316228 }, + { 5600, 398107 }, + { 5720, 524807 }, + { 5721, 526017 }, +}; + +static int _stb0899_read_reg(struct stb0899_state *state, unsigned int reg) +{ + int ret; + + u8 b0[] = { reg >> 8, reg & 0xff }; + u8 buf; + + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 2 + },{ + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = &buf, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + if (ret != -ERESTARTSYS) + dprintk(state->verbose, FE_ERROR, 1, + "Read error, Reg=[0x%02x], Status=%d", + reg, ret); + + return ret < 0 ? ret : -EREMOTEIO; + } + if (unlikely(*state->verbose >= FE_DEBUGREG)) + dprintk(state->verbose, FE_ERROR, 1, "Reg=[0x%02x], data=%02x", + reg, buf); + + return (unsigned int)buf; +} + +int stb0899_read_reg(struct stb0899_state *state, unsigned int reg) +{ + int result; + + result = _stb0899_read_reg(state, reg); + /* + * Bug ID 9: + * access to 0xf2xx/0xf6xx + * must be followed by read from 0xf2ff/0xf6ff. + */ + if ((reg != 0xf2ff) && (reg != 0xf6ff) && + (((reg & 0xff00) == 0xf200) || ((reg & 0xff00) == 0xf600))) + _stb0899_read_reg(state, (reg | 0x00ff)); + + return result; +} + +u32 _stb0899_read_s2reg(struct stb0899_state *state, + u32 stb0899_i2cdev, + u32 stb0899_base_addr, + u16 stb0899_reg_offset) +{ + int status; + u32 data; + u8 buf[7] = { 0 }; + u16 tmpaddr; + + u8 buf_0[] = { + GETBYTE(stb0899_i2cdev, BYTE1), /* 0xf3 S2 Base Address (MSB) */ + GETBYTE(stb0899_i2cdev, BYTE0), /* 0xfc S2 Base Address (LSB) */ + GETBYTE(stb0899_base_addr, BYTE0), /* 0x00 Base Address (LSB) */ + GETBYTE(stb0899_base_addr, BYTE1), /* 0x04 Base Address (LSB) */ + GETBYTE(stb0899_base_addr, BYTE2), /* 0x00 Base Address (MSB) */ + GETBYTE(stb0899_base_addr, BYTE3), /* 0x00 Base Address (MSB) */ + }; + u8 buf_1[] = { + 0x00, /* 0xf3 Reg Offset */ + 0x00, /* 0x44 Reg Offset */ + }; + + struct i2c_msg msg_0 = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf_0, + .len = 6 + }; + + struct i2c_msg msg_1 = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf_1, + .len = 2 + }; + + struct i2c_msg msg_r = { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = buf, + .len = 4 + }; + + tmpaddr = stb0899_reg_offset & 0xff00; + if (!(stb0899_reg_offset & 0x8)) + tmpaddr = stb0899_reg_offset | 0x20; + + buf_1[0] = GETBYTE(tmpaddr, BYTE1); + buf_1[1] = GETBYTE(tmpaddr, BYTE0); + + status = i2c_transfer(state->i2c, &msg_0, 1); + if (status < 1) { + if (status != -ERESTARTSYS) + printk(KERN_ERR "%s ERR(1), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n", + __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, status); + + goto err; + } + + /* Dummy */ + status = i2c_transfer(state->i2c, &msg_1, 1); + if (status < 1) + goto err; + + status = i2c_transfer(state->i2c, &msg_r, 1); + if (status < 1) + goto err; + + buf_1[0] = GETBYTE(stb0899_reg_offset, BYTE1); + buf_1[1] = GETBYTE(stb0899_reg_offset, BYTE0); + + /* Actual */ + status = i2c_transfer(state->i2c, &msg_1, 1); + if (status < 1) { + if (status != -ERESTARTSYS) + printk(KERN_ERR "%s ERR(2), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n", + __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, status); + goto err; + } + + status = i2c_transfer(state->i2c, &msg_r, 1); + if (status < 1) { + if (status != -ERESTARTSYS) + printk(KERN_ERR "%s ERR(3), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n", + __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, status); + return status < 0 ? status : -EREMOTEIO; + } + + data = MAKEWORD32(buf[3], buf[2], buf[1], buf[0]); + if (unlikely(*state->verbose >= FE_DEBUGREG)) + printk(KERN_DEBUG "%s Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Data=[0x%08x]\n", + __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, data); + + return data; + +err: + return status < 0 ? status : -EREMOTEIO; +} + +int stb0899_write_s2reg(struct stb0899_state *state, + u32 stb0899_i2cdev, + u32 stb0899_base_addr, + u16 stb0899_reg_offset, + u32 stb0899_data) +{ + int status; + + /* Base Address Setup */ + u8 buf_0[] = { + GETBYTE(stb0899_i2cdev, BYTE1), /* 0xf3 S2 Base Address (MSB) */ + GETBYTE(stb0899_i2cdev, BYTE0), /* 0xfc S2 Base Address (LSB) */ + GETBYTE(stb0899_base_addr, BYTE0), /* 0x00 Base Address (LSB) */ + GETBYTE(stb0899_base_addr, BYTE1), /* 0x04 Base Address (LSB) */ + GETBYTE(stb0899_base_addr, BYTE2), /* 0x00 Base Address (MSB) */ + GETBYTE(stb0899_base_addr, BYTE3), /* 0x00 Base Address (MSB) */ + }; + u8 buf_1[] = { + 0x00, /* 0xf3 Reg Offset */ + 0x00, /* 0x44 Reg Offset */ + 0x00, /* data */ + 0x00, /* data */ + 0x00, /* data */ + 0x00, /* data */ + }; + + struct i2c_msg msg_0 = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf_0, + .len = 6 + }; + + struct i2c_msg msg_1 = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf_1, + .len = 6 + }; + + buf_1[0] = GETBYTE(stb0899_reg_offset, BYTE1); + buf_1[1] = GETBYTE(stb0899_reg_offset, BYTE0); + buf_1[2] = GETBYTE(stb0899_data, BYTE0); + buf_1[3] = GETBYTE(stb0899_data, BYTE1); + buf_1[4] = GETBYTE(stb0899_data, BYTE2); + buf_1[5] = GETBYTE(stb0899_data, BYTE3); + + if (unlikely(*state->verbose >= FE_DEBUGREG)) + printk(KERN_DEBUG "%s Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x]\n", + __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, stb0899_data); + + status = i2c_transfer(state->i2c, &msg_0, 1); + if (unlikely(status < 1)) { + if (status != -ERESTARTSYS) + printk(KERN_ERR "%s ERR (1), Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x], status=%d\n", + __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, stb0899_data, status); + goto err; + } + status = i2c_transfer(state->i2c, &msg_1, 1); + if (unlikely(status < 1)) { + if (status != -ERESTARTSYS) + printk(KERN_ERR "%s ERR (2), Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x], status=%d\n", + __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, stb0899_data, status); + + return status < 0 ? status : -EREMOTEIO; + } + + return 0; + +err: + return status < 0 ? status : -EREMOTEIO; +} + +int stb0899_read_regs(struct stb0899_state *state, unsigned int reg, u8 *buf, u32 count) +{ + int status; + + u8 b0[] = { reg >> 8, reg & 0xff }; + + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 2 + },{ + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = buf, + .len = count + } + }; + + status = i2c_transfer(state->i2c, msg, 2); + if (status != 2) { + if (status != -ERESTARTSYS) + printk(KERN_ERR "%s Read error, Reg=[0x%04x], Count=%u, Status=%d\n", + __func__, reg, count, status); + goto err; + } + /* + * Bug ID 9: + * access to 0xf2xx/0xf6xx + * must be followed by read from 0xf2ff/0xf6ff. + */ + if ((reg != 0xf2ff) && (reg != 0xf6ff) && + (((reg & 0xff00) == 0xf200) || ((reg & 0xff00) == 0xf600))) + _stb0899_read_reg(state, (reg | 0x00ff)); + + if (unlikely(*state->verbose >= FE_DEBUGREG)) { + int i; + + printk(KERN_DEBUG "%s [0x%04x]:", __func__, reg); + for (i = 0; i < count; i++) { + printk(" %02x", buf[i]); + } + printk("\n"); + } + + return 0; +err: + return status < 0 ? status : -EREMOTEIO; +} + +int stb0899_write_regs(struct stb0899_state *state, unsigned int reg, u8 *data, u32 count) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg i2c_msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + count + }; + + if (2 + count > sizeof(buf)) { + printk(KERN_WARNING + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, count); + return -EINVAL; + } + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + memcpy(&buf[2], data, count); + + if (unlikely(*state->verbose >= FE_DEBUGREG)) { + int i; + + printk(KERN_DEBUG "%s [0x%04x]:", __func__, reg); + for (i = 0; i < count; i++) + printk(" %02x", data[i]); + printk("\n"); + } + ret = i2c_transfer(state->i2c, &i2c_msg, 1); + + /* + * Bug ID 9: + * access to 0xf2xx/0xf6xx + * must be followed by read from 0xf2ff/0xf6ff. + */ + if ((((reg & 0xff00) == 0xf200) || ((reg & 0xff00) == 0xf600))) + stb0899_read_reg(state, (reg | 0x00ff)); + + if (ret != 1) { + if (ret != -ERESTARTSYS) + dprintk(state->verbose, FE_ERROR, 1, "Reg=[0x%04x], Data=[0x%02x ...], Count=%u, Status=%d", + reg, data[0], count, ret); + return ret < 0 ? ret : -EREMOTEIO; + } + + return 0; +} + +int stb0899_write_reg(struct stb0899_state *state, unsigned int reg, u8 data) +{ + return stb0899_write_regs(state, reg, &data, 1); +} + +/* + * stb0899_get_mclk + * Get STB0899 master clock frequency + * ExtClk: external clock frequency (Hz) + */ +static u32 stb0899_get_mclk(struct stb0899_state *state) +{ + u32 mclk = 0, div = 0; + + div = stb0899_read_reg(state, STB0899_NCOARSE); + mclk = (div + 1) * state->config->xtal_freq / 6; + dprintk(state->verbose, FE_DEBUG, 1, "div=%d, mclk=%d", div, mclk); + + return mclk; +} + +/* + * stb0899_set_mclk + * Set STB0899 master Clock frequency + * Mclk: demodulator master clock + * ExtClk: external clock frequency (Hz) + */ +static void stb0899_set_mclk(struct stb0899_state *state, u32 Mclk) +{ + struct stb0899_internal *internal = &state->internal; + u8 mdiv = 0; + + dprintk(state->verbose, FE_DEBUG, 1, "state->config=%p", state->config); + mdiv = ((6 * Mclk) / state->config->xtal_freq) - 1; + dprintk(state->verbose, FE_DEBUG, 1, "mdiv=%d", mdiv); + + stb0899_write_reg(state, STB0899_NCOARSE, mdiv); + internal->master_clk = stb0899_get_mclk(state); + + dprintk(state->verbose, FE_DEBUG, 1, "MasterCLOCK=%d", internal->master_clk); +} + +static int stb0899_postproc(struct stb0899_state *state, u8 ctl, int enable) +{ + struct stb0899_config *config = state->config; + const struct stb0899_postproc *postproc = config->postproc; + + /* post process event */ + if (postproc) { + if (enable) { + if (postproc[ctl].level == STB0899_GPIOPULLUP) + stb0899_write_reg(state, postproc[ctl].gpio, 0x02); + else + stb0899_write_reg(state, postproc[ctl].gpio, 0x82); + } else { + if (postproc[ctl].level == STB0899_GPIOPULLUP) + stb0899_write_reg(state, postproc[ctl].gpio, 0x82); + else + stb0899_write_reg(state, postproc[ctl].gpio, 0x02); + } + } + return 0; +} + +static void stb0899_release(struct dvb_frontend *fe) +{ + struct stb0899_state *state = fe->demodulator_priv; + + dprintk(state->verbose, FE_DEBUG, 1, "Release Frontend"); + /* post process event */ + stb0899_postproc(state, STB0899_POSTPROC_GPIO_POWER, 0); + kfree(state); +} + +/* + * stb0899_get_alpha + * return: rolloff + */ +static int stb0899_get_alpha(struct stb0899_state *state) +{ + u8 mode_coeff; + + mode_coeff = stb0899_read_reg(state, STB0899_DEMOD); + + if (STB0899_GETFIELD(MODECOEFF, mode_coeff) == 1) + return 20; + else + return 35; +} + +/* + * stb0899_init_calc + */ +static void stb0899_init_calc(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + int master_clk; + u8 agc[2]; + u32 reg; + + /* Read registers (in burst mode) */ + stb0899_read_regs(state, STB0899_AGC1REF, agc, 2); /* AGC1R and AGC2O */ + + /* Initial calculations */ + master_clk = stb0899_get_mclk(state); + internal->t_agc1 = 0; + internal->t_agc2 = 0; + internal->master_clk = master_clk; + internal->mclk = master_clk / 65536L; + internal->rolloff = stb0899_get_alpha(state); + + /* DVBS2 Initial calculations */ + /* Set AGC value to the middle */ + internal->agc_gain = 8154; + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL); + STB0899_SETFIELD_VAL(IF_GAIN_INIT, reg, internal->agc_gain); + stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL, STB0899_OFF0_IF_AGC_CNTRL, reg); + + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, RRC_ALPHA); + internal->rrc_alpha = STB0899_GETFIELD(RRC_ALPHA, reg); + + internal->center_freq = 0; + internal->av_frame_coarse = 10; + internal->av_frame_fine = 20; + internal->step_size = 2; +/* + if ((pParams->SpectralInv == FE_IQ_NORMAL) || (pParams->SpectralInv == FE_IQ_AUTO)) + pParams->IQLocked = 0; + else + pParams->IQLocked = 1; +*/ +} + +static int stb0899_wait_diseqc_fifo_empty(struct stb0899_state *state, int timeout) +{ + u8 reg = 0; + unsigned long start = jiffies; + + while (1) { + reg = stb0899_read_reg(state, STB0899_DISSTATUS); + if (!STB0899_GETFIELD(FIFOFULL, reg)) + break; + if ((jiffies - start) > timeout) { + dprintk(state->verbose, FE_ERROR, 1, "timed out !!"); + return -ETIMEDOUT; + } + } + + return 0; +} + +static int stb0899_send_diseqc_msg(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd) +{ + struct stb0899_state *state = fe->demodulator_priv; + u8 reg, i; + + if (cmd->msg_len > 8) + return -EINVAL; + + /* enable FIFO precharge */ + reg = stb0899_read_reg(state, STB0899_DISCNTRL1); + STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 1); + stb0899_write_reg(state, STB0899_DISCNTRL1, reg); + for (i = 0; i < cmd->msg_len; i++) { + /* wait for FIFO empty */ + if (stb0899_wait_diseqc_fifo_empty(state, 100) < 0) + return -ETIMEDOUT; + + stb0899_write_reg(state, STB0899_DISFIFO, cmd->msg[i]); + } + reg = stb0899_read_reg(state, STB0899_DISCNTRL1); + STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0); + stb0899_write_reg(state, STB0899_DISCNTRL1, reg); + msleep(100); + return 0; +} + +static int stb0899_wait_diseqc_rxidle(struct stb0899_state *state, int timeout) +{ + u8 reg = 0; + unsigned long start = jiffies; + + while (!STB0899_GETFIELD(RXEND, reg)) { + reg = stb0899_read_reg(state, STB0899_DISRX_ST0); + if (jiffies - start > timeout) { + dprintk(state->verbose, FE_ERROR, 1, "timed out!!"); + return -ETIMEDOUT; + } + msleep(10); + } + + return 0; +} + +static int stb0899_recv_slave_reply(struct dvb_frontend *fe, struct dvb_diseqc_slave_reply *reply) +{ + struct stb0899_state *state = fe->demodulator_priv; + u8 reg, length = 0, i; + int result; + + if (stb0899_wait_diseqc_rxidle(state, 100) < 0) + return -ETIMEDOUT; + + reg = stb0899_read_reg(state, STB0899_DISRX_ST0); + if (STB0899_GETFIELD(RXEND, reg)) { + + reg = stb0899_read_reg(state, STB0899_DISRX_ST1); + length = STB0899_GETFIELD(FIFOBYTENBR, reg); + + if (length > sizeof (reply->msg)) { + result = -EOVERFLOW; + goto exit; + } + reply->msg_len = length; + + /* extract data */ + for (i = 0; i < length; i++) + reply->msg[i] = stb0899_read_reg(state, STB0899_DISFIFO); + } + + return 0; +exit: + + return result; +} + +static int stb0899_wait_diseqc_txidle(struct stb0899_state *state, int timeout) +{ + u8 reg = 0; + unsigned long start = jiffies; + + while (!STB0899_GETFIELD(TXIDLE, reg)) { + reg = stb0899_read_reg(state, STB0899_DISSTATUS); + if (jiffies - start > timeout) { + dprintk(state->verbose, FE_ERROR, 1, "timed out!!"); + return -ETIMEDOUT; + } + msleep(10); + } + return 0; +} + +static int stb0899_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst) +{ + struct stb0899_state *state = fe->demodulator_priv; + u8 reg, old_state; + + /* wait for diseqc idle */ + if (stb0899_wait_diseqc_txidle(state, 100) < 0) + return -ETIMEDOUT; + + reg = stb0899_read_reg(state, STB0899_DISCNTRL1); + old_state = reg; + /* set to burst mode */ + STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x03); + STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x01); + stb0899_write_reg(state, STB0899_DISCNTRL1, reg); + switch (burst) { + case SEC_MINI_A: + /* unmodulated */ + stb0899_write_reg(state, STB0899_DISFIFO, 0x00); + break; + case SEC_MINI_B: + /* modulated */ + stb0899_write_reg(state, STB0899_DISFIFO, 0xff); + break; + } + reg = stb0899_read_reg(state, STB0899_DISCNTRL1); + STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x00); + stb0899_write_reg(state, STB0899_DISCNTRL1, reg); + /* wait for diseqc idle */ + if (stb0899_wait_diseqc_txidle(state, 100) < 0) + return -ETIMEDOUT; + + /* restore state */ + stb0899_write_reg(state, STB0899_DISCNTRL1, old_state); + + return 0; +} + +static int stb0899_diseqc_init(struct stb0899_state *state) +{ +/* + struct dvb_diseqc_slave_reply rx_data; +*/ + u8 f22_tx, reg; + + u32 mclk, tx_freq = 22000;/* count = 0, i; */ + reg = stb0899_read_reg(state, STB0899_DISCNTRL2); + STB0899_SETFIELD_VAL(ONECHIP_TRX, reg, 0); + stb0899_write_reg(state, STB0899_DISCNTRL2, reg); + + /* disable Tx spy */ + reg = stb0899_read_reg(state, STB0899_DISCNTRL1); + STB0899_SETFIELD_VAL(DISEQCRESET, reg, 1); + stb0899_write_reg(state, STB0899_DISCNTRL1, reg); + + reg = stb0899_read_reg(state, STB0899_DISCNTRL1); + STB0899_SETFIELD_VAL(DISEQCRESET, reg, 0); + stb0899_write_reg(state, STB0899_DISCNTRL1, reg); + + mclk = stb0899_get_mclk(state); + f22_tx = mclk / (tx_freq * 32); + stb0899_write_reg(state, STB0899_DISF22, f22_tx); /* DiSEqC Tx freq */ + state->rx_freq = 20000; + + return 0; +} + +static int stb0899_sleep(struct dvb_frontend *fe) +{ + struct stb0899_state *state = fe->demodulator_priv; +/* + u8 reg; +*/ + dprintk(state->verbose, FE_DEBUG, 1, "Going to Sleep .. (Really tired .. :-))"); + /* post process event */ + stb0899_postproc(state, STB0899_POSTPROC_GPIO_POWER, 0); + + return 0; +} + +static int stb0899_wakeup(struct dvb_frontend *fe) +{ + int rc; + struct stb0899_state *state = fe->demodulator_priv; + + if ((rc = stb0899_write_reg(state, STB0899_SYNTCTRL, STB0899_SELOSCI))) + return rc; + /* Activate all clocks; DVB-S2 registers are inaccessible otherwise. */ + if ((rc = stb0899_write_reg(state, STB0899_STOPCLK1, 0x00))) + return rc; + if ((rc = stb0899_write_reg(state, STB0899_STOPCLK2, 0x00))) + return rc; + + /* post process event */ + stb0899_postproc(state, STB0899_POSTPROC_GPIO_POWER, 1); + + return 0; +} + +static int stb0899_init(struct dvb_frontend *fe) +{ + int i; + struct stb0899_state *state = fe->demodulator_priv; + struct stb0899_config *config = state->config; + + dprintk(state->verbose, FE_DEBUG, 1, "Initializing STB0899 ... "); + + /* init device */ + dprintk(state->verbose, FE_DEBUG, 1, "init device"); + for (i = 0; config->init_dev[i].address != 0xffff; i++) + stb0899_write_reg(state, config->init_dev[i].address, config->init_dev[i].data); + + dprintk(state->verbose, FE_DEBUG, 1, "init S2 demod"); + /* init S2 demod */ + for (i = 0; config->init_s2_demod[i].offset != 0xffff; i++) + stb0899_write_s2reg(state, STB0899_S2DEMOD, + config->init_s2_demod[i].base_address, + config->init_s2_demod[i].offset, + config->init_s2_demod[i].data); + + dprintk(state->verbose, FE_DEBUG, 1, "init S1 demod"); + /* init S1 demod */ + for (i = 0; config->init_s1_demod[i].address != 0xffff; i++) + stb0899_write_reg(state, config->init_s1_demod[i].address, config->init_s1_demod[i].data); + + dprintk(state->verbose, FE_DEBUG, 1, "init S2 FEC"); + /* init S2 fec */ + for (i = 0; config->init_s2_fec[i].offset != 0xffff; i++) + stb0899_write_s2reg(state, STB0899_S2FEC, + config->init_s2_fec[i].base_address, + config->init_s2_fec[i].offset, + config->init_s2_fec[i].data); + + dprintk(state->verbose, FE_DEBUG, 1, "init TST"); + /* init test */ + for (i = 0; config->init_tst[i].address != 0xffff; i++) + stb0899_write_reg(state, config->init_tst[i].address, config->init_tst[i].data); + + stb0899_init_calc(state); + stb0899_diseqc_init(state); + + return 0; +} + +static int stb0899_table_lookup(const struct stb0899_tab *tab, int max, int val) +{ + int res = 0; + int min = 0, med; + + if (val < tab[min].read) + res = tab[min].real; + else if (val >= tab[max].read) + res = tab[max].real; + else { + while ((max - min) > 1) { + med = (max + min) / 2; + if (val >= tab[min].read && val < tab[med].read) + max = med; + else + min = med; + } + res = ((val - tab[min].read) * + (tab[max].real - tab[min].real) / + (tab[max].read - tab[min].read)) + + tab[min].real; + } + + return res; +} + +static int stb0899_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct stb0899_state *state = fe->demodulator_priv; + struct stb0899_internal *internal = &state->internal; + + int val; + u32 reg; + *strength = 0; + switch (state->delsys) { + case SYS_DVBS: + case SYS_DSS: + if (internal->lock) { + reg = stb0899_read_reg(state, STB0899_VSTATUS); + if (STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg)) { + + reg = stb0899_read_reg(state, STB0899_AGCIQIN); + val = (s32)(s8)STB0899_GETFIELD(AGCIQVALUE, reg); + + *strength = stb0899_table_lookup(stb0899_dvbsrf_tab, ARRAY_SIZE(stb0899_dvbsrf_tab) - 1, val); + *strength += 750; + dprintk(state->verbose, FE_DEBUG, 1, "AGCIQVALUE = 0x%02x, C = %d * 0.1 dBm", + val & 0xff, *strength); + } + } + break; + case SYS_DVBS2: + if (internal->lock) { + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_GAIN); + val = STB0899_GETFIELD(IF_AGC_GAIN, reg); + + *strength = stb0899_table_lookup(stb0899_dvbs2rf_tab, ARRAY_SIZE(stb0899_dvbs2rf_tab) - 1, val); + *strength += 950; + dprintk(state->verbose, FE_DEBUG, 1, "IF_AGC_GAIN = 0x%04x, C = %d * 0.1 dBm", + val & 0x3fff, *strength); + } + break; + default: + dprintk(state->verbose, FE_DEBUG, 1, "Unsupported delivery system"); + return -EINVAL; + } + + return 0; +} + +static int stb0899_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct stb0899_state *state = fe->demodulator_priv; + struct stb0899_internal *internal = &state->internal; + + unsigned int val, quant, quantn = -1, est, estn = -1; + u8 buf[2]; + u32 reg; + + *snr = 0; + reg = stb0899_read_reg(state, STB0899_VSTATUS); + switch (state->delsys) { + case SYS_DVBS: + case SYS_DSS: + if (internal->lock) { + if (STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg)) { + + stb0899_read_regs(state, STB0899_NIRM, buf, 2); + val = MAKEWORD16(buf[0], buf[1]); + + *snr = stb0899_table_lookup(stb0899_cn_tab, ARRAY_SIZE(stb0899_cn_tab) - 1, val); + dprintk(state->verbose, FE_DEBUG, 1, "NIR = 0x%02x%02x = %u, C/N = %d * 0.1 dBm\n", + buf[0], buf[1], val, *snr); + } + } + break; + case SYS_DVBS2: + if (internal->lock) { + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_CNTRL1); + quant = STB0899_GETFIELD(UWP_ESN0_QUANT, reg); + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_STAT2); + est = STB0899_GETFIELD(ESN0_EST, reg); + if (est == 1) + val = 301; /* C/N = 30.1 dB */ + else if (est == 2) + val = 270; /* C/N = 27.0 dB */ + else { + /* quantn = 100 * log(quant^2) */ + quantn = stb0899_table_lookup(stb0899_quant_tab, ARRAY_SIZE(stb0899_quant_tab) - 1, quant * 100); + /* estn = 100 * log(est) */ + estn = stb0899_table_lookup(stb0899_est_tab, ARRAY_SIZE(stb0899_est_tab) - 1, est); + /* snr(dBm/10) = -10*(log(est)-log(quant^2)) => snr(dBm/10) = (100*log(quant^2)-100*log(est))/10 */ + val = (quantn - estn) / 10; + } + *snr = val; + dprintk(state->verbose, FE_DEBUG, 1, "Es/N0 quant = %d (%d) estimate = %u (%d), C/N = %d * 0.1 dBm", + quant, quantn, est, estn, val); + } + break; + default: + dprintk(state->verbose, FE_DEBUG, 1, "Unsupported delivery system"); + return -EINVAL; + } + + return 0; +} + +static int stb0899_read_status(struct dvb_frontend *fe, enum fe_status *status) +{ + struct stb0899_state *state = fe->demodulator_priv; + struct stb0899_internal *internal = &state->internal; + u8 reg; + *status = 0; + + switch (state->delsys) { + case SYS_DVBS: + case SYS_DSS: + dprintk(state->verbose, FE_DEBUG, 1, "Delivery system DVB-S/DSS"); + if (internal->lock) { + reg = stb0899_read_reg(state, STB0899_VSTATUS); + if (STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg)) { + dprintk(state->verbose, FE_DEBUG, 1, "--------> FE_HAS_CARRIER | FE_HAS_LOCK"); + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + + reg = stb0899_read_reg(state, STB0899_PLPARM); + if (STB0899_GETFIELD(VITCURPUN, reg)) { + dprintk(state->verbose, FE_DEBUG, 1, "--------> FE_HAS_VITERBI | FE_HAS_SYNC"); + *status |= FE_HAS_VITERBI | FE_HAS_SYNC; + /* post process event */ + stb0899_postproc(state, STB0899_POSTPROC_GPIO_LOCK, 1); + } + } + } + break; + case SYS_DVBS2: + dprintk(state->verbose, FE_DEBUG, 1, "Delivery system DVB-S2"); + if (internal->lock) { + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_STAT2); + if (STB0899_GETFIELD(UWP_LOCK, reg) && STB0899_GETFIELD(CSM_LOCK, reg)) { + *status |= FE_HAS_CARRIER; + dprintk(state->verbose, FE_DEBUG, 1, + "UWP & CSM Lock ! ---> DVB-S2 FE_HAS_CARRIER"); + + reg = stb0899_read_reg(state, STB0899_CFGPDELSTATUS1); + if (STB0899_GETFIELD(CFGPDELSTATUS_LOCK, reg)) { + *status |= FE_HAS_LOCK; + dprintk(state->verbose, FE_DEBUG, 1, + "Packet Delineator Locked ! -----> DVB-S2 FE_HAS_LOCK"); + + } + if (STB0899_GETFIELD(CONTINUOUS_STREAM, reg)) { + *status |= FE_HAS_VITERBI; + dprintk(state->verbose, FE_DEBUG, 1, + "Packet Delineator found VITERBI ! -----> DVB-S2 FE_HAS_VITERBI"); + } + if (STB0899_GETFIELD(ACCEPTED_STREAM, reg)) { + *status |= FE_HAS_SYNC; + dprintk(state->verbose, FE_DEBUG, 1, + "Packet Delineator found SYNC ! -----> DVB-S2 FE_HAS_SYNC"); + /* post process event */ + stb0899_postproc(state, STB0899_POSTPROC_GPIO_LOCK, 1); + } + } + } + break; + default: + dprintk(state->verbose, FE_DEBUG, 1, "Unsupported delivery system"); + return -EINVAL; + } + return 0; +} + +/* + * stb0899_get_error + * viterbi error for DVB-S/DSS + * packet error for DVB-S2 + * Bit Error Rate or Packet Error Rate * 10 ^ 7 + */ +static int stb0899_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct stb0899_state *state = fe->demodulator_priv; + struct stb0899_internal *internal = &state->internal; + + u8 lsb, msb; + + *ber = 0; + + switch (state->delsys) { + case SYS_DVBS: + case SYS_DSS: + if (internal->lock) { + lsb = stb0899_read_reg(state, STB0899_ECNT1L); + msb = stb0899_read_reg(state, STB0899_ECNT1M); + *ber = MAKEWORD16(msb, lsb); + /* Viterbi Check */ + if (STB0899_GETFIELD(VSTATUS_PRFVIT, internal->v_status)) { + /* Error Rate */ + *ber *= 9766; + /* ber = ber * 10 ^ 7 */ + *ber /= (-1 + (1 << (2 * STB0899_GETFIELD(NOE, internal->err_ctrl)))); + *ber /= 8; + } + } + break; + case SYS_DVBS2: + if (internal->lock) { + lsb = stb0899_read_reg(state, STB0899_ECNT1L); + msb = stb0899_read_reg(state, STB0899_ECNT1M); + *ber = MAKEWORD16(msb, lsb); + /* ber = ber * 10 ^ 7 */ + *ber *= 10000000; + *ber /= (-1 + (1 << (4 + 2 * STB0899_GETFIELD(NOE, internal->err_ctrl)))); + } + break; + default: + dprintk(state->verbose, FE_DEBUG, 1, "Unsupported delivery system"); + return -EINVAL; + } + + return 0; +} + +static int stb0899_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct stb0899_state *state = fe->demodulator_priv; + + switch (voltage) { + case SEC_VOLTAGE_13: + stb0899_write_reg(state, STB0899_GPIO00CFG, 0x82); + stb0899_write_reg(state, STB0899_GPIO01CFG, 0x02); + stb0899_write_reg(state, STB0899_GPIO02CFG, 0x00); + break; + case SEC_VOLTAGE_18: + stb0899_write_reg(state, STB0899_GPIO00CFG, 0x02); + stb0899_write_reg(state, STB0899_GPIO01CFG, 0x02); + stb0899_write_reg(state, STB0899_GPIO02CFG, 0x82); + break; + case SEC_VOLTAGE_OFF: + stb0899_write_reg(state, STB0899_GPIO00CFG, 0x82); + stb0899_write_reg(state, STB0899_GPIO01CFG, 0x82); + stb0899_write_reg(state, STB0899_GPIO02CFG, 0x82); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int stb0899_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct stb0899_state *state = fe->demodulator_priv; + struct stb0899_internal *internal = &state->internal; + + u8 div, reg; + + /* wait for diseqc idle */ + if (stb0899_wait_diseqc_txidle(state, 100) < 0) + return -ETIMEDOUT; + + switch (tone) { + case SEC_TONE_ON: + div = (internal->master_clk / 100) / 5632; + div = (div + 5) / 10; + stb0899_write_reg(state, STB0899_DISEQCOCFG, 0x66); + reg = stb0899_read_reg(state, STB0899_ACRPRESC); + STB0899_SETFIELD_VAL(ACRPRESC, reg, 0x03); + stb0899_write_reg(state, STB0899_ACRPRESC, reg); + stb0899_write_reg(state, STB0899_ACRDIV1, div); + break; + case SEC_TONE_OFF: + stb0899_write_reg(state, STB0899_DISEQCOCFG, 0x20); + break; + default: + return -EINVAL; + } + return 0; +} + +int stb0899_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + int i2c_stat; + struct stb0899_state *state = fe->demodulator_priv; + + i2c_stat = stb0899_read_reg(state, STB0899_I2CRPT); + if (i2c_stat < 0) + goto err; + + if (enable) { + dprintk(state->verbose, FE_DEBUG, 1, "Enabling I2C Repeater ..."); + i2c_stat |= STB0899_I2CTON; + if (stb0899_write_reg(state, STB0899_I2CRPT, i2c_stat) < 0) + goto err; + } else { + dprintk(state->verbose, FE_DEBUG, 1, "Disabling I2C Repeater ..."); + i2c_stat &= ~STB0899_I2CTON; + if (stb0899_write_reg(state, STB0899_I2CRPT, i2c_stat) < 0) + goto err; + } + return 0; +err: + dprintk(state->verbose, FE_ERROR, 1, "I2C Repeater control failed"); + return -EREMOTEIO; +} + + +static inline void CONVERT32(u32 x, char *str) +{ + *str++ = (x >> 24) & 0xff; + *str++ = (x >> 16) & 0xff; + *str++ = (x >> 8) & 0xff; + *str++ = (x >> 0) & 0xff; + *str = '\0'; +} + +static int stb0899_get_dev_id(struct stb0899_state *state) +{ + u8 chip_id, release; + u16 id; + u32 demod_ver = 0, fec_ver = 0; + char demod_str[5] = { 0 }; + char fec_str[5] = { 0 }; + + id = stb0899_read_reg(state, STB0899_DEV_ID); + dprintk(state->verbose, FE_DEBUG, 1, "ID reg=[0x%02x]", id); + chip_id = STB0899_GETFIELD(CHIP_ID, id); + release = STB0899_GETFIELD(CHIP_REL, id); + + dprintk(state->verbose, FE_ERROR, 1, "Device ID=[%d], Release=[%d]", + chip_id, release); + + CONVERT32(STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_CORE_ID), (char *)&demod_str); + + demod_ver = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_VERSION_ID); + dprintk(state->verbose, FE_ERROR, 1, "Demodulator Core ID=[%s], Version=[%d]", (char *) &demod_str, demod_ver); + CONVERT32(STB0899_READ_S2REG(STB0899_S2FEC, FEC_CORE_ID_REG), (char *)&fec_str); + fec_ver = STB0899_READ_S2REG(STB0899_S2FEC, FEC_VER_ID_REG); + if (! (chip_id > 0)) { + dprintk(state->verbose, FE_ERROR, 1, "couldn't find a STB 0899"); + + return -ENODEV; + } + dprintk(state->verbose, FE_ERROR, 1, "FEC Core ID=[%s], Version=[%d]", (char*) &fec_str, fec_ver); + + return 0; +} + +static void stb0899_set_delivery(struct stb0899_state *state) +{ + u8 reg; + u8 stop_clk[2]; + + stop_clk[0] = stb0899_read_reg(state, STB0899_STOPCLK1); + stop_clk[1] = stb0899_read_reg(state, STB0899_STOPCLK2); + + switch (state->delsys) { + case SYS_DVBS: + dprintk(state->verbose, FE_DEBUG, 1, "Delivery System -- DVB-S"); + /* FECM/Viterbi ON */ + reg = stb0899_read_reg(state, STB0899_FECM); + STB0899_SETFIELD_VAL(FECM_RSVD0, reg, 0); + STB0899_SETFIELD_VAL(FECM_VITERBI_ON, reg, 1); + stb0899_write_reg(state, STB0899_FECM, reg); + + stb0899_write_reg(state, STB0899_RSULC, 0xb1); + stb0899_write_reg(state, STB0899_TSULC, 0x40); + stb0899_write_reg(state, STB0899_RSLLC, 0x42); + stb0899_write_reg(state, STB0899_TSLPL, 0x12); + + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESLDPC, reg, 1); + stb0899_write_reg(state, STB0899_TSTRES, reg); + + STB0899_SETFIELD_VAL(STOP_CHK8PSK, stop_clk[0], 1); + STB0899_SETFIELD_VAL(STOP_CKFEC108, stop_clk[0], 1); + STB0899_SETFIELD_VAL(STOP_CKFEC216, stop_clk[0], 1); + + STB0899_SETFIELD_VAL(STOP_CKPKDLIN108, stop_clk[1], 1); + STB0899_SETFIELD_VAL(STOP_CKPKDLIN216, stop_clk[1], 1); + + STB0899_SETFIELD_VAL(STOP_CKINTBUF216, stop_clk[0], 1); + STB0899_SETFIELD_VAL(STOP_CKCORE216, stop_clk[0], 0); + + STB0899_SETFIELD_VAL(STOP_CKS2DMD108, stop_clk[1], 1); + break; + case SYS_DVBS2: + /* FECM/Viterbi OFF */ + reg = stb0899_read_reg(state, STB0899_FECM); + STB0899_SETFIELD_VAL(FECM_RSVD0, reg, 0); + STB0899_SETFIELD_VAL(FECM_VITERBI_ON, reg, 0); + stb0899_write_reg(state, STB0899_FECM, reg); + + stb0899_write_reg(state, STB0899_RSULC, 0xb1); + stb0899_write_reg(state, STB0899_TSULC, 0x42); + stb0899_write_reg(state, STB0899_RSLLC, 0x40); + stb0899_write_reg(state, STB0899_TSLPL, 0x02); + + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESLDPC, reg, 0); + stb0899_write_reg(state, STB0899_TSTRES, reg); + + STB0899_SETFIELD_VAL(STOP_CHK8PSK, stop_clk[0], 1); + STB0899_SETFIELD_VAL(STOP_CKFEC108, stop_clk[0], 0); + STB0899_SETFIELD_VAL(STOP_CKFEC216, stop_clk[0], 0); + + STB0899_SETFIELD_VAL(STOP_CKPKDLIN108, stop_clk[1], 0); + STB0899_SETFIELD_VAL(STOP_CKPKDLIN216, stop_clk[1], 0); + + STB0899_SETFIELD_VAL(STOP_CKINTBUF216, stop_clk[0], 0); + STB0899_SETFIELD_VAL(STOP_CKCORE216, stop_clk[0], 0); + + STB0899_SETFIELD_VAL(STOP_CKS2DMD108, stop_clk[1], 0); + break; + case SYS_DSS: + /* FECM/Viterbi ON */ + reg = stb0899_read_reg(state, STB0899_FECM); + STB0899_SETFIELD_VAL(FECM_RSVD0, reg, 1); + STB0899_SETFIELD_VAL(FECM_VITERBI_ON, reg, 1); + stb0899_write_reg(state, STB0899_FECM, reg); + + stb0899_write_reg(state, STB0899_RSULC, 0xa1); + stb0899_write_reg(state, STB0899_TSULC, 0x61); + stb0899_write_reg(state, STB0899_RSLLC, 0x42); + + reg = stb0899_read_reg(state, STB0899_TSTRES); + STB0899_SETFIELD_VAL(FRESLDPC, reg, 1); + stb0899_write_reg(state, STB0899_TSTRES, reg); + + STB0899_SETFIELD_VAL(STOP_CHK8PSK, stop_clk[0], 1); + STB0899_SETFIELD_VAL(STOP_CKFEC108, stop_clk[0], 1); + STB0899_SETFIELD_VAL(STOP_CKFEC216, stop_clk[0], 1); + + STB0899_SETFIELD_VAL(STOP_CKPKDLIN108, stop_clk[1], 1); + STB0899_SETFIELD_VAL(STOP_CKPKDLIN216, stop_clk[1], 1); + + STB0899_SETFIELD_VAL(STOP_CKCORE216, stop_clk[0], 0); + + STB0899_SETFIELD_VAL(STOP_CKS2DMD108, stop_clk[1], 1); + break; + default: + dprintk(state->verbose, FE_ERROR, 1, "Unsupported delivery system"); + break; + } + STB0899_SETFIELD_VAL(STOP_CKADCI108, stop_clk[0], 0); + stb0899_write_regs(state, STB0899_STOPCLK1, stop_clk, 2); +} + +/* + * stb0899_set_iterations + * set the LDPC iteration scale function + */ +static void stb0899_set_iterations(struct stb0899_state *state) +{ + struct stb0899_internal *internal = &state->internal; + struct stb0899_config *config = state->config; + + s32 iter_scale; + u32 reg; + + iter_scale = 17 * (internal->master_clk / 1000); + iter_scale += 410000; + iter_scale /= (internal->srate / 1000000); + iter_scale /= 1000; + + if (iter_scale > config->ldpc_max_iter) + iter_scale = config->ldpc_max_iter; + + reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER); + STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); + stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); +} + +static enum dvbfe_search stb0899_search(struct dvb_frontend *fe) +{ + struct stb0899_state *state = fe->demodulator_priv; + struct stb0899_params *i_params = &state->params; + struct stb0899_internal *internal = &state->internal; + struct stb0899_config *config = state->config; + struct dtv_frontend_properties *props = &fe->dtv_property_cache; + + u32 SearchRange, gain; + + i_params->freq = props->frequency; + i_params->srate = props->symbol_rate; + state->delsys = props->delivery_system; + dprintk(state->verbose, FE_DEBUG, 1, "delivery system=%d", state->delsys); + + SearchRange = 10000000; + dprintk(state->verbose, FE_DEBUG, 1, "Frequency=%d, Srate=%d", i_params->freq, i_params->srate); + /* checking Search Range is meaningless for a fixed 3 Mhz */ + if (INRANGE(i_params->srate, 1000000, 45000000)) { + dprintk(state->verbose, FE_DEBUG, 1, "Parameters IN RANGE"); + stb0899_set_delivery(state); + + if (state->config->tuner_set_rfsiggain) { + if (internal->srate > 15000000) + gain = 8; /* 15Mb < srate < 45Mb, gain = 8dB */ + else if (internal->srate > 5000000) + gain = 12; /* 5Mb < srate < 15Mb, gain = 12dB */ + else + gain = 14; /* 1Mb < srate < 5Mb, gain = 14db */ + state->config->tuner_set_rfsiggain(fe, gain); + } + + if (i_params->srate <= 5000000) + stb0899_set_mclk(state, config->lo_clk); + else + stb0899_set_mclk(state, config->hi_clk); + + switch (state->delsys) { + case SYS_DVBS: + case SYS_DSS: + dprintk(state->verbose, FE_DEBUG, 1, "DVB-S delivery system"); + internal->freq = i_params->freq; + internal->srate = i_params->srate; + /* + * search = user search range + + * 500Khz + + * 2 * Tuner_step_size + + * 10% of the symbol rate + */ + internal->srch_range = SearchRange + 1500000 + (i_params->srate / 5); + internal->derot_percent = 30; + + /* What to do for tuners having no bandwidth setup ? */ + /* enable tuner I/O */ + stb0899_i2c_gate_ctrl(&state->frontend, 1); + + if (state->config->tuner_set_bandwidth) + state->config->tuner_set_bandwidth(fe, (13 * (stb0899_carr_width(state) + SearchRange)) / 10); + if (state->config->tuner_get_bandwidth) + state->config->tuner_get_bandwidth(fe, &internal->tuner_bw); + + /* disable tuner I/O */ + stb0899_i2c_gate_ctrl(&state->frontend, 0); + + /* Set DVB-S1 AGC */ + stb0899_write_reg(state, STB0899_AGCRFCFG, 0x11); + + /* Run the search algorithm */ + dprintk(state->verbose, FE_DEBUG, 1, "running DVB-S search algo .."); + if (stb0899_dvbs_algo(state) == RANGEOK) { + internal->lock = 1; + dprintk(state->verbose, FE_DEBUG, 1, + "-------------------------------------> DVB-S LOCK !"); + +// stb0899_write_reg(state, STB0899_ERRCTRL1, 0x3d); /* Viterbi Errors */ +// internal->v_status = stb0899_read_reg(state, STB0899_VSTATUS); +// internal->err_ctrl = stb0899_read_reg(state, STB0899_ERRCTRL1); +// dprintk(state->verbose, FE_DEBUG, 1, "VSTATUS=0x%02x", internal->v_status); +// dprintk(state->verbose, FE_DEBUG, 1, "ERR_CTRL=0x%02x", internal->err_ctrl); + + return DVBFE_ALGO_SEARCH_SUCCESS; + } else { + internal->lock = 0; + + return DVBFE_ALGO_SEARCH_FAILED; + } + break; + case SYS_DVBS2: + internal->freq = i_params->freq; + internal->srate = i_params->srate; + internal->srch_range = SearchRange; + + /* enable tuner I/O */ + stb0899_i2c_gate_ctrl(&state->frontend, 1); + + if (state->config->tuner_set_bandwidth) + state->config->tuner_set_bandwidth(fe, (stb0899_carr_width(state) + SearchRange)); + if (state->config->tuner_get_bandwidth) + state->config->tuner_get_bandwidth(fe, &internal->tuner_bw); + + /* disable tuner I/O */ + stb0899_i2c_gate_ctrl(&state->frontend, 0); + +// pParams->SpectralInv = pSearch->IQ_Inversion; + + /* Set DVB-S2 AGC */ + stb0899_write_reg(state, STB0899_AGCRFCFG, 0x1c); + + /* Set IterScale =f(MCLK,SYMB) */ + stb0899_set_iterations(state); + + /* Run the search algorithm */ + dprintk(state->verbose, FE_DEBUG, 1, "running DVB-S2 search algo .."); + if (stb0899_dvbs2_algo(state) == DVBS2_FEC_LOCK) { + internal->lock = 1; + dprintk(state->verbose, FE_DEBUG, 1, + "-------------------------------------> DVB-S2 LOCK !"); + +// stb0899_write_reg(state, STB0899_ERRCTRL1, 0xb6); /* Packet Errors */ +// internal->v_status = stb0899_read_reg(state, STB0899_VSTATUS); +// internal->err_ctrl = stb0899_read_reg(state, STB0899_ERRCTRL1); + + return DVBFE_ALGO_SEARCH_SUCCESS; + } else { + internal->lock = 0; + + return DVBFE_ALGO_SEARCH_FAILED; + } + break; + default: + dprintk(state->verbose, FE_ERROR, 1, "Unsupported delivery system"); + return DVBFE_ALGO_SEARCH_INVALID; + } + } + + return DVBFE_ALGO_SEARCH_ERROR; +} + +static int stb0899_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stb0899_state *state = fe->demodulator_priv; + struct stb0899_internal *internal = &state->internal; + + dprintk(state->verbose, FE_DEBUG, 1, "Get params"); + p->symbol_rate = internal->srate; + p->frequency = internal->freq; + + return 0; +} + +static enum dvbfe_algo stb0899_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + +static struct dvb_frontend_ops stb0899_ops = { + .delsys = { SYS_DVBS, SYS_DVBS2, SYS_DSS }, + .info = { + .name = "STB0899 Multistandard", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 0, + .frequency_tolerance = 0, + .symbol_rate_min = 5000000, + .symbol_rate_max = 45000000, + + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_AUTO | + FE_CAN_2G_MODULATION | + FE_CAN_QPSK + }, + + .release = stb0899_release, + .init = stb0899_init, + .sleep = stb0899_sleep, +// .wakeup = stb0899_wakeup, + + .i2c_gate_ctrl = stb0899_i2c_gate_ctrl, + + .get_frontend_algo = stb0899_frontend_algo, + .search = stb0899_search, + .get_frontend = stb0899_get_frontend, + + + .read_status = stb0899_read_status, + .read_snr = stb0899_read_snr, + .read_signal_strength = stb0899_read_signal_strength, + .read_ber = stb0899_read_ber, + + .set_voltage = stb0899_set_voltage, + .set_tone = stb0899_set_tone, + + .diseqc_send_master_cmd = stb0899_send_diseqc_msg, + .diseqc_recv_slave_reply = stb0899_recv_slave_reply, + .diseqc_send_burst = stb0899_send_diseqc_burst, +}; + +struct dvb_frontend *stb0899_attach(struct stb0899_config *config, struct i2c_adapter *i2c) +{ + struct stb0899_state *state = NULL; + enum stb0899_inversion inversion; + + state = kzalloc(sizeof (struct stb0899_state), GFP_KERNEL); + if (state == NULL) + goto error; + + inversion = config->inversion; + state->verbose = &verbose; + state->config = config; + state->i2c = i2c; + state->frontend.ops = stb0899_ops; + state->frontend.demodulator_priv = state; + state->internal.inversion = inversion; + + stb0899_wakeup(&state->frontend); + if (stb0899_get_dev_id(state) == -ENODEV) { + printk("%s: Exiting .. !\n", __func__); + goto error; + } + + printk("%s: Attaching STB0899 \n", __func__); + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(stb0899_attach); +MODULE_PARM_DESC(verbose, "Set Verbosity level"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_DESCRIPTION("STB0899 Multi-Std frontend"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/stb0899_drv.h b/drivers/media/dvb-frontends/stb0899_drv.h new file mode 100644 index 00000000..8d26ff6e --- /dev/null +++ b/drivers/media/dvb-frontends/stb0899_drv.h @@ -0,0 +1,162 @@ +/* + STB0899 Multistandard Frontend driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STB0899_DRV_H +#define __STB0899_DRV_H + +#include +#include + +#include "dvb_frontend.h" + +#define STB0899_TSMODE_SERIAL 1 +#define STB0899_CLKPOL_FALLING 2 +#define STB0899_CLKNULL_PARITY 3 +#define STB0899_SYNC_FORCED 4 +#define STB0899_FECMODE_DSS 5 + +struct stb0899_s1_reg { + u16 address; + u8 data; +}; + +struct stb0899_s2_reg { + u16 offset; + u32 base_address; + u32 data; +}; + +enum stb0899_inversion { + IQ_SWAP_OFF = 0, + IQ_SWAP_ON, + IQ_SWAP_AUTO +}; + +#define STB0899_GPIO00 0xf140 +#define STB0899_GPIO01 0xf141 +#define STB0899_GPIO02 0xf142 +#define STB0899_GPIO03 0xf143 +#define STB0899_GPIO04 0xf144 +#define STB0899_GPIO05 0xf145 +#define STB0899_GPIO06 0xf146 +#define STB0899_GPIO07 0xf147 +#define STB0899_GPIO08 0xf148 +#define STB0899_GPIO09 0xf149 +#define STB0899_GPIO10 0xf14a +#define STB0899_GPIO11 0xf14b +#define STB0899_GPIO12 0xf14c +#define STB0899_GPIO13 0xf14d +#define STB0899_GPIO14 0xf14e +#define STB0899_GPIO15 0xf14f +#define STB0899_GPIO16 0xf150 +#define STB0899_GPIO17 0xf151 +#define STB0899_GPIO18 0xf152 +#define STB0899_GPIO19 0xf153 +#define STB0899_GPIO20 0xf154 + +#define STB0899_GPIOPULLUP 0x01 /* Output device is connected to Vdd */ +#define STB0899_GPIOPULLDN 0x00 /* Output device is connected to Vss */ + +#define STB0899_POSTPROC_GPIO_POWER 0x00 +#define STB0899_POSTPROC_GPIO_LOCK 0x01 + +/* + * Post process output configuration control + * 1. POWER ON/OFF (index 0) + * 2. FE_HAS_LOCK/LOCK_LOSS (index 1) + * + * @gpio = one of the above listed GPIO's + * @level = output state: pulled up or low + */ +struct stb0899_postproc { + u16 gpio; + u8 level; +}; + +struct stb0899_config { + const struct stb0899_s1_reg *init_dev; + const struct stb0899_s2_reg *init_s2_demod; + const struct stb0899_s1_reg *init_s1_demod; + const struct stb0899_s2_reg *init_s2_fec; + const struct stb0899_s1_reg *init_tst; + + const struct stb0899_postproc *postproc; + + enum stb0899_inversion inversion; + + u32 xtal_freq; + + u8 demod_address; + u8 ts_output_mode; + u8 block_sync_mode; + u8 ts_pfbit_toggle; + + u8 clock_polarity; + u8 data_clk_parity; + u8 fec_mode; + u8 data_output_ctl; + u8 data_fifo_mode; + u8 out_rate_comp; + u8 i2c_repeater; +// int inversion; + int lo_clk; + int hi_clk; + + u32 esno_ave; + u32 esno_quant; + u32 avframes_coarse; + u32 avframes_fine; + u32 miss_threshold; + u32 uwp_threshold_acq; + u32 uwp_threshold_track; + u32 uwp_threshold_sof; + u32 sof_search_timeout; + + u32 btr_nco_bits; + u32 btr_gain_shift_offset; + u32 crl_nco_bits; + u32 ldpc_max_iter; + + int (*tuner_set_frequency)(struct dvb_frontend *fe, u32 frequency); + int (*tuner_get_frequency)(struct dvb_frontend *fe, u32 *frequency); + int (*tuner_set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); + int (*tuner_get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth); + int (*tuner_set_rfsiggain)(struct dvb_frontend *fe, u32 rf_gain); +}; + +#if IS_ENABLED(CONFIG_DVB_STB0899) + +extern struct dvb_frontend *stb0899_attach(struct stb0899_config *config, + struct i2c_adapter *i2c); + +#else + +static inline struct dvb_frontend *stb0899_attach(struct stb0899_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif //CONFIG_DVB_STB0899 + + +#endif diff --git a/drivers/media/dvb-frontends/stb0899_priv.h b/drivers/media/dvb-frontends/stb0899_priv.h new file mode 100644 index 00000000..82395b91 --- /dev/null +++ b/drivers/media/dvb-frontends/stb0899_priv.h @@ -0,0 +1,263 @@ +/* + STB0899 Multistandard Frontend driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STB0899_PRIV_H +#define __STB0899_PRIV_H + +#include "dvb_frontend.h" +#include "stb0899_drv.h" + +#define FE_ERROR 0 +#define FE_NOTICE 1 +#define FE_INFO 2 +#define FE_DEBUG 3 +#define FE_DEBUGREG 4 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((*x > FE_ERROR) && (*x > y)) \ + printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ + else if ((*x > FE_NOTICE) && (*x > y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ + else if ((*x > FE_INFO) && (*x > y)) \ + printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ + else if ((*x > FE_DEBUG) && (*x > y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ + } else { \ + if (*x > y) \ + printk(format, ##arg); \ + } \ +} while(0) + +#define INRANGE(val, x, y) (((x <= val) && (val <= y)) || \ + ((y <= val) && (val <= x)) ? 1 : 0) + +#define BYTE0 0 +#define BYTE1 8 +#define BYTE2 16 +#define BYTE3 24 + +#define GETBYTE(x, y) (((x) >> (y)) & 0xff) +#define MAKEWORD32(a, b, c, d) (((a) << 24) | ((b) << 16) | ((c) << 8) | (d)) +#define MAKEWORD16(a, b) (((a) << 8) | (b)) + +#define LSB(x) ((x & 0xff)) +#define MSB(y) ((y >> 8) & 0xff) + + +#define STB0899_GETFIELD(bitf, val) ((val >> STB0899_OFFST_##bitf) & ((1 << STB0899_WIDTH_##bitf) - 1)) + + +#define STB0899_SETFIELD(mask, val, width, offset) (mask & (~(((1 << width) - 1) << \ + offset))) | ((val & \ + ((1 << width) - 1)) << offset) + +#define STB0899_SETFIELD_VAL(bitf, mask, val) (mask = (mask & (~(((1 << STB0899_WIDTH_##bitf) - 1) <<\ + STB0899_OFFST_##bitf))) | \ + (val << STB0899_OFFST_##bitf)) + + +enum stb0899_status { + NOAGC1 = 0, + AGC1OK, + NOTIMING, + ANALOGCARRIER, + TIMINGOK, + NOAGC2, + AGC2OK, + NOCARRIER, + CARRIEROK, + NODATA, + FALSELOCK, + DATAOK, + OUTOFRANGE, + RANGEOK, + DVBS2_DEMOD_LOCK, + DVBS2_DEMOD_NOLOCK, + DVBS2_FEC_LOCK, + DVBS2_FEC_NOLOCK +}; + +enum stb0899_modcod { + STB0899_DUMMY_PLF, + STB0899_QPSK_14, + STB0899_QPSK_13, + STB0899_QPSK_25, + STB0899_QPSK_12, + STB0899_QPSK_35, + STB0899_QPSK_23, + STB0899_QPSK_34, + STB0899_QPSK_45, + STB0899_QPSK_56, + STB0899_QPSK_89, + STB0899_QPSK_910, + STB0899_8PSK_35, + STB0899_8PSK_23, + STB0899_8PSK_34, + STB0899_8PSK_56, + STB0899_8PSK_89, + STB0899_8PSK_910, + STB0899_16APSK_23, + STB0899_16APSK_34, + STB0899_16APSK_45, + STB0899_16APSK_56, + STB0899_16APSK_89, + STB0899_16APSK_910, + STB0899_32APSK_34, + STB0899_32APSK_45, + STB0899_32APSK_56, + STB0899_32APSK_89, + STB0899_32APSK_910 +}; + +enum stb0899_frame { + STB0899_LONG_FRAME, + STB0899_SHORT_FRAME +}; + +enum stb0899_alpha { + RRC_20, + RRC_25, + RRC_35 +}; + +struct stb0899_tab { + s32 real; + s32 read; +}; + +enum stb0899_fec { + STB0899_FEC_1_2 = 13, + STB0899_FEC_2_3 = 18, + STB0899_FEC_3_4 = 21, + STB0899_FEC_5_6 = 24, + STB0899_FEC_6_7 = 25, + STB0899_FEC_7_8 = 26 +}; + +struct stb0899_params { + u32 freq; /* Frequency */ + u32 srate; /* Symbol rate */ + enum fe_code_rate fecrate; +}; + +struct stb0899_internal { + u32 master_clk; + u32 freq; /* Demod internal Frequency */ + u32 srate; /* Demod internal Symbol rate */ + enum stb0899_fec fecrate; /* Demod internal FEC rate */ + s32 srch_range; /* Demod internal Search Range */ + s32 sub_range; /* Demod current sub range (Hz) */ + s32 tuner_step; /* Tuner step (Hz) */ + s32 tuner_offst; /* Relative offset to carrier (Hz) */ + u32 tuner_bw; /* Current bandwidth of the tuner (Hz) */ + + s32 mclk; /* Masterclock Divider factor (binary) */ + s32 rolloff; /* Current RollOff of the filter (x100) */ + + s16 derot_freq; /* Current derotator frequency (Hz) */ + s16 derot_percent; + + s16 direction; /* Current derotator search direction */ + s16 derot_step; /* Derotator step (binary value) */ + s16 t_derot; /* Derotator time constant (ms) */ + s16 t_data; /* Data recovery time constant (ms) */ + s16 sub_dir; /* Direction of the next sub range */ + + s16 t_agc1; /* Agc1 time constant (ms) */ + s16 t_agc2; /* Agc2 time constant (ms) */ + + u32 lock; /* Demod internal lock state */ + enum stb0899_status status; /* Demod internal status */ + + /* DVB-S2 */ + s32 agc_gain; /* RF AGC Gain */ + s32 center_freq; /* Nominal carrier frequency */ + s32 av_frame_coarse; /* Coarse carrier freq search frames */ + s32 av_frame_fine; /* Fine carrier freq search frames */ + + s16 step_size; /* Carrier frequency search step size */ + + enum stb0899_alpha rrc_alpha; + enum stb0899_inversion inversion; + enum stb0899_modcod modcod; + u8 pilots; /* Pilots found */ + + enum stb0899_frame frame_length; + u8 v_status; /* VSTATUS */ + u8 err_ctrl; /* ERRCTRLn */ +}; + +struct stb0899_state { + struct i2c_adapter *i2c; + struct stb0899_config *config; + struct dvb_frontend frontend; + + u32 *verbose; /* Cached module verbosity level */ + + struct stb0899_internal internal; /* Device internal parameters */ + + /* cached params from API */ + enum fe_delivery_system delsys; + struct stb0899_params params; + + u32 rx_freq; /* DiSEqC 2.0 receiver freq */ + struct mutex search_lock; +}; +/* stb0899.c */ +extern int stb0899_read_reg(struct stb0899_state *state, + unsigned int reg); + +extern u32 _stb0899_read_s2reg(struct stb0899_state *state, + u32 stb0899_i2cdev, + u32 stb0899_base_addr, + u16 stb0899_reg_offset); + +extern int stb0899_read_regs(struct stb0899_state *state, + unsigned int reg, u8 *buf, + u32 count); + +extern int stb0899_write_regs(struct stb0899_state *state, + unsigned int reg, u8 *data, + u32 count); + +extern int stb0899_write_reg(struct stb0899_state *state, + unsigned int reg, + u8 data); + +extern int stb0899_write_s2reg(struct stb0899_state *state, + u32 stb0899_i2cdev, + u32 stb0899_base_addr, + u16 stb0899_reg_offset, + u32 stb0899_data); + +extern int stb0899_i2c_gate_ctrl(struct dvb_frontend *fe, int enable); + + +#define STB0899_READ_S2REG(DEVICE, REG) (_stb0899_read_s2reg(state, DEVICE, STB0899_BASE_##REG, STB0899_OFF0_##REG)) +//#define STB0899_WRITE_S2REG(DEVICE, REG, DATA) (_stb0899_write_s2reg(state, DEVICE, STB0899_BASE_##REG, STB0899_OFF0_##REG, DATA)) + +/* stb0899_algo.c */ +extern enum stb0899_status stb0899_dvbs_algo(struct stb0899_state *state); +extern enum stb0899_status stb0899_dvbs2_algo(struct stb0899_state *state); +extern long stb0899_carr_width(struct stb0899_state *state); + +#endif //__STB0899_PRIV_H diff --git a/drivers/media/dvb-frontends/stb0899_reg.h b/drivers/media/dvb-frontends/stb0899_reg.h new file mode 100644 index 00000000..ba1ed563 --- /dev/null +++ b/drivers/media/dvb-frontends/stb0899_reg.h @@ -0,0 +1,2027 @@ +/* + STB0899 Multistandard Frontend driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STB0899_REG_H +#define __STB0899_REG_H + +/* S1 */ +#define STB0899_DEV_ID 0xf000 +#define STB0899_CHIP_ID (0x0f << 4) +#define STB0899_OFFST_CHIP_ID 4 +#define STB0899_WIDTH_CHIP_ID 4 +#define STB0899_CHIP_REL (0x0f << 0) +#define STB0899_OFFST_CHIP_REL 0 +#define STB0899_WIDTH_CHIP_REL 4 + +#define STB0899_DEMOD 0xf40e +#define STB0899_MODECOEFF (0x01 << 0) +#define STB0899_OFFST_MODECOEFF 0 +#define STB0899_WIDTH_MODECOEFF 1 + +#define STB0899_RCOMPC 0xf410 +#define STB0899_AGC1CN 0xf412 +#define STB0899_AGC1REF 0xf413 +#define STB0899_RTC 0xf417 +#define STB0899_TMGCFG 0xf418 +#define STB0899_AGC2REF 0xf419 +#define STB0899_TLSR 0xf41a + +#define STB0899_CFD 0xf41b +#define STB0899_CFD_ON (0x01 << 7) +#define STB0899_OFFST_CFD_ON 7 +#define STB0899_WIDTH_CFD_ON 1 + +#define STB0899_ACLC 0xf41c + +#define STB0899_BCLC 0xf41d +#define STB0899_OFFST_ALGO 6 +#define STB0899_WIDTH_ALGO_QPSK2 2 +#define STB0899_ALGO_QPSK2 (2 << 6) +#define STB0899_ALGO_QPSK1 (1 << 6) +#define STB0899_ALGO_BPSK (0 << 6) +#define STB0899_OFFST_BETA 0 +#define STB0899_WIDTH_BETA 6 + +#define STB0899_EQON 0xf41e +#define STB0899_LDT 0xf41f +#define STB0899_LDT2 0xf420 +#define STB0899_EQUALREF 0xf425 +#define STB0899_TMGRAMP 0xf426 +#define STB0899_TMGTHD 0xf427 +#define STB0899_IDCCOMP 0xf428 +#define STB0899_QDCCOMP 0xf429 +#define STB0899_POWERI 0xf42a +#define STB0899_POWERQ 0xf42b +#define STB0899_RCOMP 0xf42c + +#define STB0899_AGCIQIN 0xf42e +#define STB0899_AGCIQVALUE (0xff << 0) +#define STB0899_OFFST_AGCIQVALUE 0 +#define STB0899_WIDTH_AGCIQVALUE 8 + +#define STB0899_AGC2I1 0xf436 +#define STB0899_AGC2I2 0xf437 + +#define STB0899_TLIR 0xf438 +#define STB0899_TLIR_TMG_LOCK_IND (0xff << 0) +#define STB0899_OFFST_TLIR_TMG_LOCK_IND 0 +#define STB0899_WIDTH_TLIR_TMG_LOCK_IND 8 + +#define STB0899_RTF 0xf439 +#define STB0899_RTF_TIMING_LOOP_FREQ (0xff << 0) +#define STB0899_OFFST_RTF_TIMING_LOOP_FREQ 0 +#define STB0899_WIDTH_RTF_TIMING_LOOP_FREQ 8 + +#define STB0899_DSTATUS 0xf43a +#define STB0899_CARRIER_FOUND (0x01 << 7) +#define STB0899_OFFST_CARRIER_FOUND 7 +#define STB0899_WIDTH_CARRIER_FOUND 1 +#define STB0899_TMG_LOCK (0x01 << 6) +#define STB0899_OFFST_TMG_LOCK 6 +#define STB0899_WIDTH_TMG_LOCK 1 +#define STB0899_DEMOD_LOCK (0x01 << 5) +#define STB0899_OFFST_DEMOD_LOCK 5 +#define STB0899_WIDTH_DEMOD_LOCK 1 +#define STB0899_TMG_AUTO (0x01 << 4) +#define STB0899_OFFST_TMG_AUTO 4 +#define STB0899_WIDTH_TMG_AUTO 1 +#define STB0899_END_MAIN (0x01 << 3) +#define STB0899_OFFST_END_MAIN 3 +#define STB0899_WIDTH_END_MAIN 1 + +#define STB0899_LDI 0xf43b +#define STB0899_OFFST_LDI 0 +#define STB0899_WIDTH_LDI 8 + +#define STB0899_CFRM 0xf43e +#define STB0899_OFFST_CFRM 0 +#define STB0899_WIDTH_CFRM 8 + +#define STB0899_CFRL 0xf43f +#define STB0899_OFFST_CFRL 0 +#define STB0899_WIDTH_CFRL 8 + +#define STB0899_NIRM 0xf440 +#define STB0899_OFFST_NIRM 0 +#define STB0899_WIDTH_NIRM 8 + +#define STB0899_NIRL 0xf441 +#define STB0899_OFFST_NIRL 0 +#define STB0899_WIDTH_NIRL 8 + +#define STB0899_ISYMB 0xf444 +#define STB0899_QSYMB 0xf445 + +#define STB0899_SFRH 0xf446 +#define STB0899_OFFST_SFRH 0 +#define STB0899_WIDTH_SFRH 8 + +#define STB0899_SFRM 0xf447 +#define STB0899_OFFST_SFRM 0 +#define STB0899_WIDTH_SFRM 8 + +#define STB0899_SFRL 0xf448 +#define STB0899_OFFST_SFRL 4 +#define STB0899_WIDTH_SFRL 4 + +#define STB0899_SFRUPH 0xf44c +#define STB0899_SFRUPM 0xf44d +#define STB0899_SFRUPL 0xf44e + +#define STB0899_EQUAI1 0xf4e0 +#define STB0899_EQUAQ1 0xf4e1 +#define STB0899_EQUAI2 0xf4e2 +#define STB0899_EQUAQ2 0xf4e3 +#define STB0899_EQUAI3 0xf4e4 +#define STB0899_EQUAQ3 0xf4e5 +#define STB0899_EQUAI4 0xf4e6 +#define STB0899_EQUAQ4 0xf4e7 +#define STB0899_EQUAI5 0xf4e8 +#define STB0899_EQUAQ5 0xf4e9 + +#define STB0899_DSTATUS2 0xf50c +#define STB0899_DS2_TMG_AUTOSRCH (0x01 << 7) +#define STB8999_OFFST_DS2_TMG_AUTOSRCH 7 +#define STB0899_WIDTH_DS2_TMG_AUTOSRCH 1 +#define STB0899_DS2_END_MAINLOOP (0x01 << 6) +#define STB0899_OFFST_DS2_END_MAINLOOP 6 +#define STB0899_WIDTH_DS2_END_MAINLOOP 1 +#define STB0899_DS2_CFSYNC (0x01 << 5) +#define STB0899_OFFST_DS2_CFSYNC 5 +#define STB0899_WIDTH_DS2_CFSYNC 1 +#define STB0899_DS2_TMGLOCK (0x01 << 4) +#define STB0899_OFFST_DS2_TMGLOCK 4 +#define STB0899_WIDTH_DS2_TMGLOCK 1 +#define STB0899_DS2_DEMODWAIT (0x01 << 3) +#define STB0899_OFFST_DS2_DEMODWAIT 3 +#define STB0899_WIDTH_DS2_DEMODWAIT 1 +#define STB0899_DS2_FECON (0x01 << 1) +#define STB0899_OFFST_DS2_FECON 1 +#define STB0899_WIDTH_DS2_FECON 1 + +/* S1 FEC */ +#define STB0899_VSTATUS 0xf50d +#define STB0899_VSTATUS_VITERBI_ON (0x01 << 7) +#define STB0899_OFFST_VSTATUS_VITERBI_ON 7 +#define STB0899_WIDTH_VSTATUS_VITERBI_ON 1 +#define STB0899_VSTATUS_END_LOOPVIT (0x01 << 6) +#define STB0899_OFFST_VSTATUS_END_LOOPVIT 6 +#define STB0899_WIDTH_VSTATUS_END_LOOPVIT 1 +#define STB0899_VSTATUS_PRFVIT (0x01 << 4) +#define STB0899_OFFST_VSTATUS_PRFVIT 4 +#define STB0899_WIDTH_VSTATUS_PRFVIT 1 +#define STB0899_VSTATUS_LOCKEDVIT (0x01 << 3) +#define STB0899_OFFST_VSTATUS_LOCKEDVIT 3 +#define STB0899_WIDTH_VSTATUS_LOCKEDVIT 1 + +#define STB0899_VERROR 0xf50f + +#define STB0899_IQSWAP 0xf523 +#define STB0899_SYM (0x01 << 3) +#define STB0899_OFFST_SYM 3 +#define STB0899_WIDTH_SYM 1 + +#define STB0899_FECAUTO1 0xf530 +#define STB0899_DSSSRCH (0x01 << 3) +#define STB0899_OFFST_DSSSRCH 3 +#define STB0899_WIDTH_DSSSRCH 1 +#define STB0899_SYMSRCH (0x01 << 2) +#define STB0899_OFFST_SYMSRCH 2 +#define STB0899_WIDTH_SYMSRCH 1 +#define STB0899_QPSKSRCH (0x01 << 1) +#define STB0899_OFFST_QPSKSRCH 1 +#define STB0899_WIDTH_QPSKSRCH 1 +#define STB0899_BPSKSRCH (0x01 << 0) +#define STB0899_OFFST_BPSKSRCH 0 +#define STB0899_WIDTH_BPSKSRCH 1 + +#define STB0899_FECM 0xf533 +#define STB0899_FECM_NOT_DVB (0x01 << 7) +#define STB0899_OFFST_FECM_NOT_DVB 7 +#define STB0899_WIDTH_FECM_NOT_DVB 1 +#define STB0899_FECM_RSVD1 (0x07 << 4) +#define STB0899_OFFST_FECM_RSVD1 4 +#define STB0899_WIDTH_FECM_RSVD1 3 +#define STB0899_FECM_VITERBI_ON (0x01 << 3) +#define STB0899_OFFST_FECM_VITERBI_ON 3 +#define STB0899_WIDTH_FECM_VITERBI_ON 1 +#define STB0899_FECM_RSVD0 (0x01 << 2) +#define STB0899_OFFST_FECM_RSVD0 2 +#define STB0899_WIDTH_FECM_RSVD0 1 +#define STB0899_FECM_SYNCDIS (0x01 << 1) +#define STB0899_OFFST_FECM_SYNCDIS 1 +#define STB0899_WIDTH_FECM_SYNCDIS 1 +#define STB0899_FECM_SYMI (0x01 << 0) +#define STB0899_OFFST_FECM_SYMI 0 +#define STB0899_WIDTH_FECM_SYMI 1 + +#define STB0899_VTH12 0xf534 +#define STB0899_VTH23 0xf535 +#define STB0899_VTH34 0xf536 +#define STB0899_VTH56 0xf537 +#define STB0899_VTH67 0xf538 +#define STB0899_VTH78 0xf539 + +#define STB0899_PRVIT 0xf53c +#define STB0899_PR_7_8 (0x01 << 5) +#define STB0899_OFFST_PR_7_8 5 +#define STB0899_WIDTH_PR_7_8 1 +#define STB0899_PR_6_7 (0x01 << 4) +#define STB0899_OFFST_PR_6_7 4 +#define STB0899_WIDTH_PR_6_7 1 +#define STB0899_PR_5_6 (0x01 << 3) +#define STB0899_OFFST_PR_5_6 3 +#define STB0899_WIDTH_PR_5_6 1 +#define STB0899_PR_3_4 (0x01 << 2) +#define STB0899_OFFST_PR_3_4 2 +#define STB0899_WIDTH_PR_3_4 1 +#define STB0899_PR_2_3 (0x01 << 1) +#define STB0899_OFFST_PR_2_3 1 +#define STB0899_WIDTH_PR_2_3 1 +#define STB0899_PR_1_2 (0x01 << 0) +#define STB0899_OFFST_PR_1_2 0 +#define STB0899_WIDTH_PR_1_2 1 + +#define STB0899_VITSYNC 0xf53d +#define STB0899_AM (0x01 << 7) +#define STB0899_OFFST_AM 7 +#define STB0899_WIDTH_AM 1 +#define STB0899_FREEZE (0x01 << 6) +#define STB0899_OFFST_FREEZE 6 +#define STB0899_WIDTH_FREEZE 1 +#define STB0899_SN_65536 (0x03 << 4) +#define STB0899_OFFST_SN_65536 4 +#define STB0899_WIDTH_SN_65536 2 +#define STB0899_SN_16384 (0x01 << 5) +#define STB0899_OFFST_SN_16384 5 +#define STB0899_WIDTH_SN_16384 1 +#define STB0899_SN_4096 (0x01 << 4) +#define STB0899_OFFST_SN_4096 4 +#define STB0899_WIDTH_SN_4096 1 +#define STB0899_SN_1024 (0x00 << 4) +#define STB0899_OFFST_SN_1024 4 +#define STB0899_WIDTH_SN_1024 0 +#define STB0899_TO_128 (0x03 << 2) +#define STB0899_OFFST_TO_128 2 +#define STB0899_WIDTH_TO_128 2 +#define STB0899_TO_64 (0x01 << 3) +#define STB0899_OFFST_TO_64 3 +#define STB0899_WIDTH_TO_64 1 +#define STB0899_TO_32 (0x01 << 2) +#define STB0899_OFFST_TO_32 2 +#define STB0899_WIDTH_TO_32 1 +#define STB0899_TO_16 (0x00 << 2) +#define STB0899_OFFST_TO_16 2 +#define STB0899_WIDTH_TO_16 0 +#define STB0899_HYST_128 (0x03 << 1) +#define STB0899_OFFST_HYST_128 1 +#define STB0899_WIDTH_HYST_128 2 +#define STB0899_HYST_64 (0x01 << 1) +#define STB0899_OFFST_HYST_64 1 +#define STB0899_WIDTH_HYST_64 1 +#define STB0899_HYST_32 (0x01 << 0) +#define STB0899_OFFST_HYST_32 0 +#define STB0899_WIDTH_HYST_32 1 +#define STB0899_HYST_16 (0x00 << 0) +#define STB0899_OFFST_HYST_16 0 +#define STB0899_WIDTH_HYST_16 0 + +#define STB0899_RSULC 0xf548 +#define STB0899_ULDIL_ON (0x01 << 7) +#define STB0899_OFFST_ULDIL_ON 7 +#define STB0899_WIDTH_ULDIL_ON 1 +#define STB0899_ULAUTO_ON (0x01 << 6) +#define STB0899_OFFST_ULAUTO_ON 6 +#define STB0899_WIDTH_ULAUTO_ON 1 +#define STB0899_ULRS_ON (0x01 << 5) +#define STB0899_OFFST_ULRS_ON 5 +#define STB0899_WIDTH_ULRS_ON 1 +#define STB0899_ULDESCRAM_ON (0x01 << 4) +#define STB0899_OFFST_ULDESCRAM_ON 4 +#define STB0899_WIDTH_ULDESCRAM_ON 1 +#define STB0899_UL_DISABLE (0x01 << 2) +#define STB0899_OFFST_UL_DISABLE 2 +#define STB0899_WIDTH_UL_DISABLE 1 +#define STB0899_NOFTHRESHOLD (0x01 << 0) +#define STB0899_OFFST_NOFTHRESHOLD 0 +#define STB0899_WIDTH_NOFTHRESHOLD 1 + +#define STB0899_RSLLC 0xf54a +#define STB0899_DEMAPVIT 0xf583 +#define STB0899_DEMAPVIT_RSVD (0x01 << 7) +#define STB0899_OFFST_DEMAPVIT_RSVD 7 +#define STB0899_WIDTH_DEMAPVIT_RSVD 1 +#define STB0899_DEMAPVIT_KDIVIDER (0x7f << 0) +#define STB0899_OFFST_DEMAPVIT_KDIVIDER 0 +#define STB0899_WIDTH_DEMAPVIT_KDIVIDER 7 + +#define STB0899_PLPARM 0xf58c +#define STB0899_VITMAPPING (0x07 << 5) +#define STB0899_OFFST_VITMAPPING 5 +#define STB0899_WIDTH_VITMAPPING 3 +#define STB0899_VITMAPPING_BPSK (0x01 << 5) +#define STB0899_OFFST_VITMAPPING_BPSK 5 +#define STB0899_WIDTH_VITMAPPING_BPSK 1 +#define STB0899_VITMAPPING_QPSK (0x00 << 5) +#define STB0899_OFFST_VITMAPPING_QPSK 5 +#define STB0899_WIDTH_VITMAPPING_QPSK 0 +#define STB0899_VITCURPUN (0x1f << 0) +#define STB0899_OFFST_VITCURPUN 0 +#define STB0899_WIDTH_VITCURPUN 5 +#define STB0899_VITCURPUN_1_2 (0x0d << 0) +#define STB0899_VITCURPUN_2_3 (0x12 << 0) +#define STB0899_VITCURPUN_3_4 (0x15 << 0) +#define STB0899_VITCURPUN_5_6 (0x18 << 0) +#define STB0899_VITCURPUN_6_7 (0x19 << 0) +#define STB0899_VITCURPUN_7_8 (0x1a << 0) + +/* S2 DEMOD */ +#define STB0899_OFF0_DMD_STATUS 0xf300 +#define STB0899_BASE_DMD_STATUS 0x00000000 +#define STB0899_IF_AGC_LOCK (0x01 << 8) +#define STB0899_OFFST_IF_AGC_LOCK 0 +#define STB0899_WIDTH_IF_AGC_LOCK 1 + +#define STB0899_OFF0_CRL_FREQ 0xf304 +#define STB0899_BASE_CRL_FREQ 0x00000000 +#define STB0899_CARR_FREQ (0x3fffffff << 0) +#define STB0899_OFFST_CARR_FREQ 0 +#define STB0899_WIDTH_CARR_FREQ 30 + +#define STB0899_OFF0_BTR_FREQ 0xf308 +#define STB0899_BASE_BTR_FREQ 0x00000000 +#define STB0899_BTR_FREQ (0xfffffff << 0) +#define STB0899_OFFST_BTR_FREQ 0 +#define STB0899_WIDTH_BTR_FREQ 28 + +#define STB0899_OFF0_IF_AGC_GAIN 0xf30c +#define STB0899_BASE_IF_AGC_GAIN 0x00000000 +#define STB0899_IF_AGC_GAIN (0x3fff < 0) +#define STB0899_OFFST_IF_AGC_GAIN 0 +#define STB0899_WIDTH_IF_AGC_GAIN 14 + +#define STB0899_OFF0_BB_AGC_GAIN 0xf310 +#define STB0899_BASE_BB_AGC_GAIN 0x00000000 +#define STB0899_BB_AGC_GAIN (0x3fff < 0) +#define STB0899_OFFST_BB_AGC_GAIN 0 +#define STB0899_WIDTH_BB_AGC_GAIN 14 + +#define STB0899_OFF0_DC_OFFSET 0xf314 +#define STB0899_BASE_DC_OFFSET 0x00000000 +#define STB0899_I (0xff < 8) +#define STB0899_OFFST_I 8 +#define STB0899_WIDTH_I 8 +#define STB0899_Q (0xff < 0) +#define STB0899_OFFST_Q 8 +#define STB0899_WIDTH_Q 8 + +#define STB0899_OFF0_DMD_CNTRL 0xf31c +#define STB0899_BASE_DMD_CNTRL 0x00000000 +#define STB0899_ADC0_PINS1IN (0x01 << 6) +#define STB0899_OFFST_ADC0_PINS1IN 6 +#define STB0899_WIDTH_ADC0_PINS1IN 1 +#define STB0899_IN2COMP1_OFFBIN0 (0x01 << 3) +#define STB0899_OFFST_IN2COMP1_OFFBIN0 3 +#define STB0899_WIDTH_IN2COMP1_OFFBIN0 1 +#define STB0899_DC_COMP (0x01 << 2) +#define STB0899_OFFST_DC_COMP 2 +#define STB0899_WIDTH_DC_COMP 1 +#define STB0899_MODMODE (0x03 << 0) +#define STB0899_OFFST_MODMODE 0 +#define STB0899_WIDTH_MODMODE 2 + +#define STB0899_OFF0_IF_AGC_CNTRL 0xf320 +#define STB0899_BASE_IF_AGC_CNTRL 0x00000000 +#define STB0899_IF_GAIN_INIT (0x3fff << 13) +#define STB0899_OFFST_IF_GAIN_INIT 13 +#define STB0899_WIDTH_IF_GAIN_INIT 14 +#define STB0899_IF_GAIN_SENSE (0x01 << 12) +#define STB0899_OFFST_IF_GAIN_SENSE 12 +#define STB0899_WIDTH_IF_GAIN_SENSE 1 +#define STB0899_IF_LOOP_GAIN (0x0f << 8) +#define STB0899_OFFST_IF_LOOP_GAIN 8 +#define STB0899_WIDTH_IF_LOOP_GAIN 4 +#define STB0899_IF_LD_GAIN_INIT (0x01 << 7) +#define STB0899_OFFST_IF_LD_GAIN_INIT 7 +#define STB0899_WIDTH_IF_LD_GAIN_INIT 1 +#define STB0899_IF_AGC_REF (0x7f << 0) +#define STB0899_OFFST_IF_AGC_REF 0 +#define STB0899_WIDTH_IF_AGC_REF 7 + +#define STB0899_OFF0_BB_AGC_CNTRL 0xf324 +#define STB0899_BASE_BB_AGC_CNTRL 0x00000000 +#define STB0899_BB_GAIN_INIT (0x3fff << 12) +#define STB0899_OFFST_BB_GAIN_INIT 12 +#define STB0899_WIDTH_BB_GAIN_INIT 14 +#define STB0899_BB_LOOP_GAIN (0x0f << 8) +#define STB0899_OFFST_BB_LOOP_GAIN 8 +#define STB0899_WIDTH_BB_LOOP_GAIN 4 +#define STB0899_BB_LD_GAIN_INIT (0x01 << 7) +#define STB0899_OFFST_BB_LD_GAIN_INIT 7 +#define STB0899_WIDTH_BB_LD_GAIN_INIT 1 +#define STB0899_BB_AGC_REF (0x7f << 0) +#define STB0899_OFFST_BB_AGC_REF 0 +#define STB0899_WIDTH_BB_AGC_REF 7 + +#define STB0899_OFF0_CRL_CNTRL 0xf328 +#define STB0899_BASE_CRL_CNTRL 0x00000000 +#define STB0899_CRL_LOCK_CLEAR (0x01 << 5) +#define STB0899_OFFST_CRL_LOCK_CLEAR 5 +#define STB0899_WIDTH_CRL_LOCK_CLEAR 1 +#define STB0899_CRL_SWPR_CLEAR (0x01 << 4) +#define STB0899_OFFST_CRL_SWPR_CLEAR 4 +#define STB0899_WIDTH_CRL_SWPR_CLEAR 1 +#define STB0899_CRL_SWP_ENA (0x01 << 3) +#define STB0899_OFFST_CRL_SWP_ENA 3 +#define STB0899_WIDTH_CRL_SWP_ENA 1 +#define STB0899_CRL_DET_SEL (0x01 << 2) +#define STB0899_OFFST_CRL_DET_SEL 2 +#define STB0899_WIDTH_CRL_DET_SEL 1 +#define STB0899_CRL_SENSE (0x01 << 1) +#define STB0899_OFFST_CRL_SENSE 1 +#define STB0899_WIDTH_CRL_SENSE 1 +#define STB0899_CRL_PHSERR_CLEAR (0x01 << 0) +#define STB0899_OFFST_CRL_PHSERR_CLEAR 0 +#define STB0899_WIDTH_CRL_PHSERR_CLEAR 1 + +#define STB0899_OFF0_CRL_PHS_INIT 0xf32c +#define STB0899_BASE_CRL_PHS_INIT 0x00000000 +#define STB0899_CRL_PHS_INIT_31 (0x1 << 30) +#define STB0899_OFFST_CRL_PHS_INIT_31 30 +#define STB0899_WIDTH_CRL_PHS_INIT_31 1 +#define STB0899_CRL_LD_INIT_PHASE (0x1 << 24) +#define STB0899_OFFST_CRL_LD_INIT_PHASE 24 +#define STB0899_WIDTH_CRL_LD_INIT_PHASE 1 +#define STB0899_CRL_INIT_PHASE (0xffffff << 0) +#define STB0899_OFFST_CRL_INIT_PHASE 0 +#define STB0899_WIDTH_CRL_INIT_PHASE 24 + +#define STB0899_OFF0_CRL_FREQ_INIT 0xf330 +#define STB0899_BASE_CRL_FREQ_INIT 0x00000000 +#define STB0899_CRL_FREQ_INIT_31 (0x1 << 30) +#define STB0899_OFFST_CRL_FREQ_INIT_31 30 +#define STB0899_WIDTH_CRL_FREQ_INIT_31 1 +#define STB0899_CRL_LD_FREQ_INIT (0x1 << 24) +#define STB0899_OFFST_CRL_LD_FREQ_INIT 24 +#define STB0899_WIDTH_CRL_LD_FREQ_INIT 1 +#define STB0899_CRL_FREQ_INIT (0xffffff << 0) +#define STB0899_OFFST_CRL_FREQ_INIT 0 +#define STB0899_WIDTH_CRL_FREQ_INIT 24 + +#define STB0899_OFF0_CRL_LOOP_GAIN 0xf334 +#define STB0899_BASE_CRL_LOOP_GAIN 0x00000000 +#define STB0899_KCRL2_RSHFT (0xf << 16) +#define STB0899_OFFST_KCRL2_RSHFT 16 +#define STB0899_WIDTH_KCRL2_RSHFT 4 +#define STB0899_KCRL1 (0xf << 12) +#define STB0899_OFFST_KCRL1 12 +#define STB0899_WIDTH_KCRL1 4 +#define STB0899_KCRL1_RSHFT (0xf << 8) +#define STB0899_OFFST_KCRL1_RSHFT 8 +#define STB0899_WIDTH_KCRL1_RSHFT 4 +#define STB0899_KCRL0 (0xf << 4) +#define STB0899_OFFST_KCRL0 4 +#define STB0899_WIDTH_KCRL0 4 +#define STB0899_KCRL0_RSHFT (0xf << 0) +#define STB0899_OFFST_KCRL0_RSHFT 0 +#define STB0899_WIDTH_KCRL0_RSHFT 4 + +#define STB0899_OFF0_CRL_NOM_FREQ 0xf338 +#define STB0899_BASE_CRL_NOM_FREQ 0x00000000 +#define STB0899_CRL_NOM_FREQ (0x3fffffff << 0) +#define STB0899_OFFST_CRL_NOM_FREQ 0 +#define STB0899_WIDTH_CRL_NOM_FREQ 30 + +#define STB0899_OFF0_CRL_SWP_RATE 0xf33c +#define STB0899_BASE_CRL_SWP_RATE 0x00000000 +#define STB0899_CRL_SWP_RATE (0x3fffffff << 0) +#define STB0899_OFFST_CRL_SWP_RATE 0 +#define STB0899_WIDTH_CRL_SWP_RATE 30 + +#define STB0899_OFF0_CRL_MAX_SWP 0xf340 +#define STB0899_BASE_CRL_MAX_SWP 0x00000000 +#define STB0899_CRL_MAX_SWP (0x3fffffff << 0) +#define STB0899_OFFST_CRL_MAX_SWP 0 +#define STB0899_WIDTH_CRL_MAX_SWP 30 + +#define STB0899_OFF0_CRL_LK_CNTRL 0xf344 +#define STB0899_BASE_CRL_LK_CNTRL 0x00000000 + +#define STB0899_OFF0_DECIM_CNTRL 0xf348 +#define STB0899_BASE_DECIM_CNTRL 0x00000000 +#define STB0899_BAND_LIMIT_B (0x01 << 5) +#define STB0899_OFFST_BAND_LIMIT_B 5 +#define STB0899_WIDTH_BAND_LIMIT_B 1 +#define STB0899_WIN_SEL (0x03 << 3) +#define STB0899_OFFST_WIN_SEL 3 +#define STB0899_WIDTH_WIN_SEL 2 +#define STB0899_DECIM_RATE (0x07 << 0) +#define STB0899_OFFST_DECIM_RATE 0 +#define STB0899_WIDTH_DECIM_RATE 3 + +#define STB0899_OFF0_BTR_CNTRL 0xf34c +#define STB0899_BASE_BTR_CNTRL 0x00000000 +#define STB0899_BTR_FREQ_CORR (0x7ff << 4) +#define STB0899_OFFST_BTR_FREQ_CORR 4 +#define STB0899_WIDTH_BTR_FREQ_CORR 11 +#define STB0899_BTR_CLR_LOCK (0x01 << 3) +#define STB0899_OFFST_BTR_CLR_LOCK 3 +#define STB0899_WIDTH_BTR_CLR_LOCK 1 +#define STB0899_BTR_SENSE (0x01 << 2) +#define STB0899_OFFST_BTR_SENSE 2 +#define STB0899_WIDTH_BTR_SENSE 1 +#define STB0899_BTR_ERR_ENA (0x01 << 1) +#define STB0899_OFFST_BTR_ERR_ENA 1 +#define STB0899_WIDTH_BTR_ERR_ENA 1 +#define STB0899_INTRP_PHS_SENSE (0x01 << 0) +#define STB0899_OFFST_INTRP_PHS_SENSE 0 +#define STB0899_WIDTH_INTRP_PHS_SENSE 1 + +#define STB0899_OFF0_BTR_LOOP_GAIN 0xf350 +#define STB0899_BASE_BTR_LOOP_GAIN 0x00000000 +#define STB0899_KBTR2_RSHFT (0x0f << 16) +#define STB0899_OFFST_KBTR2_RSHFT 16 +#define STB0899_WIDTH_KBTR2_RSHFT 4 +#define STB0899_KBTR1 (0x0f << 12) +#define STB0899_OFFST_KBTR1 12 +#define STB0899_WIDTH_KBTR1 4 +#define STB0899_KBTR1_RSHFT (0x0f << 8) +#define STB0899_OFFST_KBTR1_RSHFT 8 +#define STB0899_WIDTH_KBTR1_RSHFT 4 +#define STB0899_KBTR0 (0x0f << 4) +#define STB0899_OFFST_KBTR0 4 +#define STB0899_WIDTH_KBTR0 4 +#define STB0899_KBTR0_RSHFT (0x0f << 0) +#define STB0899_OFFST_KBTR0_RSHFT 0 +#define STB0899_WIDTH_KBTR0_RSHFT 4 + +#define STB0899_OFF0_BTR_PHS_INIT 0xf354 +#define STB0899_BASE_BTR_PHS_INIT 0x00000000 +#define STB0899_BTR_LD_PHASE_INIT (0x01 << 28) +#define STB0899_OFFST_BTR_LD_PHASE_INIT 28 +#define STB0899_WIDTH_BTR_LD_PHASE_INIT 1 +#define STB0899_BTR_INIT_PHASE (0xfffffff << 0) +#define STB0899_OFFST_BTR_INIT_PHASE 0 +#define STB0899_WIDTH_BTR_INIT_PHASE 28 + +#define STB0899_OFF0_BTR_FREQ_INIT 0xf358 +#define STB0899_BASE_BTR_FREQ_INIT 0x00000000 +#define STB0899_BTR_LD_FREQ_INIT (1 << 28) +#define STB0899_OFFST_BTR_LD_FREQ_INIT 28 +#define STB0899_WIDTH_BTR_LD_FREQ_INIT 1 +#define STB0899_BTR_FREQ_INIT (0xfffffff << 0) +#define STB0899_OFFST_BTR_FREQ_INIT 0 +#define STB0899_WIDTH_BTR_FREQ_INIT 28 + +#define STB0899_OFF0_BTR_NOM_FREQ 0xf35c +#define STB0899_BASE_BTR_NOM_FREQ 0x00000000 +#define STB0899_BTR_NOM_FREQ (0xfffffff << 0) +#define STB0899_OFFST_BTR_NOM_FREQ 0 +#define STB0899_WIDTH_BTR_NOM_FREQ 28 + +#define STB0899_OFF0_BTR_LK_CNTRL 0xf360 +#define STB0899_BASE_BTR_LK_CNTRL 0x00000000 +#define STB0899_BTR_MIN_ENERGY (0x0f << 24) +#define STB0899_OFFST_BTR_MIN_ENERGY 24 +#define STB0899_WIDTH_BTR_MIN_ENERGY 4 +#define STB0899_BTR_LOCK_TH_LO (0xff << 16) +#define STB0899_OFFST_BTR_LOCK_TH_LO 16 +#define STB0899_WIDTH_BTR_LOCK_TH_LO 8 +#define STB0899_BTR_LOCK_TH_HI (0xff << 8) +#define STB0899_OFFST_BTR_LOCK_TH_HI 8 +#define STB0899_WIDTH_BTR_LOCK_TH_HI 8 +#define STB0899_BTR_LOCK_GAIN (0x03 << 6) +#define STB0899_OFFST_BTR_LOCK_GAIN 6 +#define STB0899_WIDTH_BTR_LOCK_GAIN 2 +#define STB0899_BTR_LOCK_LEAK (0x3f << 0) +#define STB0899_OFFST_BTR_LOCK_LEAK 0 +#define STB0899_WIDTH_BTR_LOCK_LEAK 6 + +#define STB0899_OFF0_DECN_CNTRL 0xf364 +#define STB0899_BASE_DECN_CNTRL 0x00000000 + +#define STB0899_OFF0_TP_CNTRL 0xf368 +#define STB0899_BASE_TP_CNTRL 0x00000000 + +#define STB0899_OFF0_TP_BUF_STATUS 0xf36c +#define STB0899_BASE_TP_BUF_STATUS 0x00000000 +#define STB0899_TP_BUFFER_FULL (1 << 0) + +#define STB0899_OFF0_DC_ESTIM 0xf37c +#define STB0899_BASE_DC_ESTIM 0x0000 +#define STB0899_I_DC_ESTIMATE (0xff << 8) +#define STB0899_OFFST_I_DC_ESTIMATE 8 +#define STB0899_WIDTH_I_DC_ESTIMATE 8 +#define STB0899_Q_DC_ESTIMATE (0xff << 0) +#define STB0899_OFFST_Q_DC_ESTIMATE 0 +#define STB0899_WIDTH_Q_DC_ESTIMATE 8 + +#define STB0899_OFF0_FLL_CNTRL 0xf310 +#define STB0899_BASE_FLL_CNTRL 0x00000020 +#define STB0899_CRL_FLL_ACC (0x01 << 4) +#define STB0899_OFFST_CRL_FLL_ACC 4 +#define STB0899_WIDTH_CRL_FLL_ACC 1 +#define STB0899_FLL_AVG_PERIOD (0x0f << 0) +#define STB0899_OFFST_FLL_AVG_PERIOD 0 +#define STB0899_WIDTH_FLL_AVG_PERIOD 4 + +#define STB0899_OFF0_FLL_FREQ_WD 0xf314 +#define STB0899_BASE_FLL_FREQ_WD 0x00000020 +#define STB0899_FLL_FREQ_WD (0xffffffff << 0) +#define STB0899_OFFST_FLL_FREQ_WD 0 +#define STB0899_WIDTH_FLL_FREQ_WD 32 + +#define STB0899_OFF0_ANTI_ALIAS_SEL 0xf358 +#define STB0899_BASE_ANTI_ALIAS_SEL 0x00000020 +#define STB0899_ANTI_ALIAS_SELB (0x03 << 0) +#define STB0899_OFFST_ANTI_ALIAS_SELB 0 +#define STB0899_WIDTH_ANTI_ALIAS_SELB 2 + +#define STB0899_OFF0_RRC_ALPHA 0xf35c +#define STB0899_BASE_RRC_ALPHA 0x00000020 +#define STB0899_RRC_ALPHA (0x03 << 0) +#define STB0899_OFFST_RRC_ALPHA 0 +#define STB0899_WIDTH_RRC_ALPHA 2 + +#define STB0899_OFF0_DC_ADAPT_LSHFT 0xf360 +#define STB0899_BASE_DC_ADAPT_LSHFT 0x00000020 +#define STB0899_DC_ADAPT_LSHFT (0x077 << 0) +#define STB0899_OFFST_DC_ADAPT_LSHFT 0 +#define STB0899_WIDTH_DC_ADAPT_LSHFT 3 + +#define STB0899_OFF0_IMB_OFFSET 0xf364 +#define STB0899_BASE_IMB_OFFSET 0x00000020 +#define STB0899_PHS_IMB_COMP (0xff << 8) +#define STB0899_OFFST_PHS_IMB_COMP 8 +#define STB0899_WIDTH_PHS_IMB_COMP 8 +#define STB0899_AMPL_IMB_COMP (0xff << 0) +#define STB0899_OFFST_AMPL_IMB_COMP 0 +#define STB0899_WIDTH_AMPL_IMB_COMP 8 + +#define STB0899_OFF0_IMB_ESTIMATE 0xf368 +#define STB0899_BASE_IMB_ESTIMATE 0x00000020 +#define STB0899_PHS_IMB_ESTIMATE (0xff << 8) +#define STB0899_OFFST_PHS_IMB_ESTIMATE 8 +#define STB0899_WIDTH_PHS_IMB_ESTIMATE 8 +#define STB0899_AMPL_IMB_ESTIMATE (0xff << 0) +#define STB0899_OFFST_AMPL_IMB_ESTIMATE 0 +#define STB0899_WIDTH_AMPL_IMB_ESTIMATE 8 + +#define STB0899_OFF0_IMB_CNTRL 0xf36c +#define STB0899_BASE_IMB_CNTRL 0x00000020 +#define STB0899_PHS_ADAPT_LSHFT (0x07 << 4) +#define STB0899_OFFST_PHS_ADAPT_LSHFT 4 +#define STB0899_WIDTH_PHS_ADAPT_LSHFT 3 +#define STB0899_AMPL_ADAPT_LSHFT (0x07 << 1) +#define STB0899_OFFST_AMPL_ADAPT_LSHFT 1 +#define STB0899_WIDTH_AMPL_ADAPT_LSHFT 3 +#define STB0899_IMB_COMP (0x01 << 0) +#define STB0899_OFFST_IMB_COMP 0 +#define STB0899_WIDTH_IMB_COMP 1 + +#define STB0899_OFF0_IF_AGC_CNTRL2 0xf374 +#define STB0899_BASE_IF_AGC_CNTRL2 0x00000020 +#define STB0899_IF_AGC_LOCK_TH (0xff << 11) +#define STB0899_OFFST_IF_AGC_LOCK_TH 11 +#define STB0899_WIDTH_IF_AGC_LOCK_TH 8 +#define STB0899_IF_AGC_SD_DIV (0xff << 3) +#define STB0899_OFFST_IF_AGC_SD_DIV 3 +#define STB0899_WIDTH_IF_AGC_SD_DIV 8 +#define STB0899_IF_AGC_DUMP_PER (0x07 << 0) +#define STB0899_OFFST_IF_AGC_DUMP_PER 0 +#define STB0899_WIDTH_IF_AGC_DUMP_PER 3 + +#define STB0899_OFF0_DMD_CNTRL2 0xf378 +#define STB0899_BASE_DMD_CNTRL2 0x00000020 +#define STB0899_SPECTRUM_INVERT (0x01 << 2) +#define STB0899_OFFST_SPECTRUM_INVERT 2 +#define STB0899_WIDTH_SPECTRUM_INVERT 1 +#define STB0899_AGC_MODE (0x01 << 1) +#define STB0899_OFFST_AGC_MODE 1 +#define STB0899_WIDTH_AGC_MODE 1 +#define STB0899_CRL_FREQ_ADJ (0x01 << 0) +#define STB0899_OFFST_CRL_FREQ_ADJ 0 +#define STB0899_WIDTH_CRL_FREQ_ADJ 1 + +#define STB0899_OFF0_TP_BUFFER 0xf300 +#define STB0899_BASE_TP_BUFFER 0x00000040 +#define STB0899_TP_BUFFER_IN (0xffff << 0) +#define STB0899_OFFST_TP_BUFFER_IN 0 +#define STB0899_WIDTH_TP_BUFFER_IN 16 + +#define STB0899_OFF0_TP_BUFFER1 0xf304 +#define STB0899_BASE_TP_BUFFER1 0x00000040 +#define STB0899_OFF0_TP_BUFFER2 0xf308 +#define STB0899_BASE_TP_BUFFER2 0x00000040 +#define STB0899_OFF0_TP_BUFFER3 0xf30c +#define STB0899_BASE_TP_BUFFER3 0x00000040 +#define STB0899_OFF0_TP_BUFFER4 0xf310 +#define STB0899_BASE_TP_BUFFER4 0x00000040 +#define STB0899_OFF0_TP_BUFFER5 0xf314 +#define STB0899_BASE_TP_BUFFER5 0x00000040 +#define STB0899_OFF0_TP_BUFFER6 0xf318 +#define STB0899_BASE_TP_BUFFER6 0x00000040 +#define STB0899_OFF0_TP_BUFFER7 0xf31c +#define STB0899_BASE_TP_BUFFER7 0x00000040 +#define STB0899_OFF0_TP_BUFFER8 0xf320 +#define STB0899_BASE_TP_BUFFER8 0x00000040 +#define STB0899_OFF0_TP_BUFFER9 0xf324 +#define STB0899_BASE_TP_BUFFER9 0x00000040 +#define STB0899_OFF0_TP_BUFFER10 0xf328 +#define STB0899_BASE_TP_BUFFER10 0x00000040 +#define STB0899_OFF0_TP_BUFFER11 0xf32c +#define STB0899_BASE_TP_BUFFER11 0x00000040 +#define STB0899_OFF0_TP_BUFFER12 0xf330 +#define STB0899_BASE_TP_BUFFER12 0x00000040 +#define STB0899_OFF0_TP_BUFFER13 0xf334 +#define STB0899_BASE_TP_BUFFER13 0x00000040 +#define STB0899_OFF0_TP_BUFFER14 0xf338 +#define STB0899_BASE_TP_BUFFER14 0x00000040 +#define STB0899_OFF0_TP_BUFFER15 0xf33c +#define STB0899_BASE_TP_BUFFER15 0x00000040 +#define STB0899_OFF0_TP_BUFFER16 0xf340 +#define STB0899_BASE_TP_BUFFER16 0x00000040 +#define STB0899_OFF0_TP_BUFFER17 0xf344 +#define STB0899_BASE_TP_BUFFER17 0x00000040 +#define STB0899_OFF0_TP_BUFFER18 0xf348 +#define STB0899_BASE_TP_BUFFER18 0x00000040 +#define STB0899_OFF0_TP_BUFFER19 0xf34c +#define STB0899_BASE_TP_BUFFER19 0x00000040 +#define STB0899_OFF0_TP_BUFFER20 0xf350 +#define STB0899_BASE_TP_BUFFER20 0x00000040 +#define STB0899_OFF0_TP_BUFFER21 0xf354 +#define STB0899_BASE_TP_BUFFER21 0x00000040 +#define STB0899_OFF0_TP_BUFFER22 0xf358 +#define STB0899_BASE_TP_BUFFER22 0x00000040 +#define STB0899_OFF0_TP_BUFFER23 0xf35c +#define STB0899_BASE_TP_BUFFER23 0x00000040 +#define STB0899_OFF0_TP_BUFFER24 0xf360 +#define STB0899_BASE_TP_BUFFER24 0x00000040 +#define STB0899_OFF0_TP_BUFFER25 0xf364 +#define STB0899_BASE_TP_BUFFER25 0x00000040 +#define STB0899_OFF0_TP_BUFFER26 0xf368 +#define STB0899_BASE_TP_BUFFER26 0x00000040 +#define STB0899_OFF0_TP_BUFFER27 0xf36c +#define STB0899_BASE_TP_BUFFER27 0x00000040 +#define STB0899_OFF0_TP_BUFFER28 0xf370 +#define STB0899_BASE_TP_BUFFER28 0x00000040 +#define STB0899_OFF0_TP_BUFFER29 0xf374 +#define STB0899_BASE_TP_BUFFER29 0x00000040 +#define STB0899_OFF0_TP_BUFFER30 0xf378 +#define STB0899_BASE_TP_BUFFER30 0x00000040 +#define STB0899_OFF0_TP_BUFFER31 0xf37c +#define STB0899_BASE_TP_BUFFER31 0x00000040 +#define STB0899_OFF0_TP_BUFFER32 0xf300 +#define STB0899_BASE_TP_BUFFER32 0x00000060 +#define STB0899_OFF0_TP_BUFFER33 0xf304 +#define STB0899_BASE_TP_BUFFER33 0x00000060 +#define STB0899_OFF0_TP_BUFFER34 0xf308 +#define STB0899_BASE_TP_BUFFER34 0x00000060 +#define STB0899_OFF0_TP_BUFFER35 0xf30c +#define STB0899_BASE_TP_BUFFER35 0x00000060 +#define STB0899_OFF0_TP_BUFFER36 0xf310 +#define STB0899_BASE_TP_BUFFER36 0x00000060 +#define STB0899_OFF0_TP_BUFFER37 0xf314 +#define STB0899_BASE_TP_BUFFER37 0x00000060 +#define STB0899_OFF0_TP_BUFFER38 0xf318 +#define STB0899_BASE_TP_BUFFER38 0x00000060 +#define STB0899_OFF0_TP_BUFFER39 0xf31c +#define STB0899_BASE_TP_BUFFER39 0x00000060 +#define STB0899_OFF0_TP_BUFFER40 0xf320 +#define STB0899_BASE_TP_BUFFER40 0x00000060 +#define STB0899_OFF0_TP_BUFFER41 0xf324 +#define STB0899_BASE_TP_BUFFER41 0x00000060 +#define STB0899_OFF0_TP_BUFFER42 0xf328 +#define STB0899_BASE_TP_BUFFER42 0x00000060 +#define STB0899_OFF0_TP_BUFFER43 0xf32c +#define STB0899_BASE_TP_BUFFER43 0x00000060 +#define STB0899_OFF0_TP_BUFFER44 0xf330 +#define STB0899_BASE_TP_BUFFER44 0x00000060 +#define STB0899_OFF0_TP_BUFFER45 0xf334 +#define STB0899_BASE_TP_BUFFER45 0x00000060 +#define STB0899_OFF0_TP_BUFFER46 0xf338 +#define STB0899_BASE_TP_BUFFER46 0x00000060 +#define STB0899_OFF0_TP_BUFFER47 0xf33c +#define STB0899_BASE_TP_BUFFER47 0x00000060 +#define STB0899_OFF0_TP_BUFFER48 0xf340 +#define STB0899_BASE_TP_BUFFER48 0x00000060 +#define STB0899_OFF0_TP_BUFFER49 0xf344 +#define STB0899_BASE_TP_BUFFER49 0x00000060 +#define STB0899_OFF0_TP_BUFFER50 0xf348 +#define STB0899_BASE_TP_BUFFER50 0x00000060 +#define STB0899_OFF0_TP_BUFFER51 0xf34c +#define STB0899_BASE_TP_BUFFER51 0x00000060 +#define STB0899_OFF0_TP_BUFFER52 0xf350 +#define STB0899_BASE_TP_BUFFER52 0x00000060 +#define STB0899_OFF0_TP_BUFFER53 0xf354 +#define STB0899_BASE_TP_BUFFER53 0x00000060 +#define STB0899_OFF0_TP_BUFFER54 0xf358 +#define STB0899_BASE_TP_BUFFER54 0x00000060 +#define STB0899_OFF0_TP_BUFFER55 0xf35c +#define STB0899_BASE_TP_BUFFER55 0x00000060 +#define STB0899_OFF0_TP_BUFFER56 0xf360 +#define STB0899_BASE_TP_BUFFER56 0x00000060 +#define STB0899_OFF0_TP_BUFFER57 0xf364 +#define STB0899_BASE_TP_BUFFER57 0x00000060 +#define STB0899_OFF0_TP_BUFFER58 0xf368 +#define STB0899_BASE_TP_BUFFER58 0x00000060 +#define STB0899_OFF0_TP_BUFFER59 0xf36c +#define STB0899_BASE_TP_BUFFER59 0x00000060 +#define STB0899_OFF0_TP_BUFFER60 0xf370 +#define STB0899_BASE_TP_BUFFER60 0x00000060 +#define STB0899_OFF0_TP_BUFFER61 0xf374 +#define STB0899_BASE_TP_BUFFER61 0x00000060 +#define STB0899_OFF0_TP_BUFFER62 0xf378 +#define STB0899_BASE_TP_BUFFER62 0x00000060 +#define STB0899_OFF0_TP_BUFFER63 0xf37c +#define STB0899_BASE_TP_BUFFER63 0x00000060 + +#define STB0899_OFF0_RESET_CNTRL 0xf300 +#define STB0899_BASE_RESET_CNTRL 0x00000400 +#define STB0899_DVBS2_RESET (0x01 << 0) +#define STB0899_OFFST_DVBS2_RESET 0 +#define STB0899_WIDTH_DVBS2_RESET 1 + +#define STB0899_OFF0_ACM_ENABLE 0xf304 +#define STB0899_BASE_ACM_ENABLE 0x00000400 +#define STB0899_ACM_ENABLE 1 + +#define STB0899_OFF0_DESCR_CNTRL 0xf30c +#define STB0899_BASE_DESCR_CNTRL 0x00000400 +#define STB0899_OFFST_DESCR_CNTRL 0 +#define STB0899_WIDTH_DESCR_CNTRL 16 + +#define STB0899_OFF0_UWP_CNTRL1 0xf320 +#define STB0899_BASE_UWP_CNTRL1 0x00000400 +#define STB0899_UWP_TH_SOF (0x7fff << 11) +#define STB0899_OFFST_UWP_TH_SOF 11 +#define STB0899_WIDTH_UWP_TH_SOF 15 +#define STB0899_UWP_ESN0_QUANT (0xff << 3) +#define STB0899_OFFST_UWP_ESN0_QUANT 3 +#define STB0899_WIDTH_UWP_ESN0_QUANT 8 +#define STB0899_UWP_ESN0_AVE (0x03 << 1) +#define STB0899_OFFST_UWP_ESN0_AVE 1 +#define STB0899_WIDTH_UWP_ESN0_AVE 2 +#define STB0899_UWP_START (0x01 << 0) +#define STB0899_OFFST_UWP_START 0 +#define STB0899_WIDTH_UWP_START 1 + +#define STB0899_OFF0_UWP_CNTRL2 0xf324 +#define STB0899_BASE_UWP_CNTRL2 0x00000400 +#define STB0899_UWP_MISS_TH (0xff << 16) +#define STB0899_OFFST_UWP_MISS_TH 16 +#define STB0899_WIDTH_UWP_MISS_TH 8 +#define STB0899_FE_FINE_TRK (0xff << 8) +#define STB0899_OFFST_FE_FINE_TRK 8 +#define STB0899_WIDTH_FE_FINE_TRK 8 +#define STB0899_FE_COARSE_TRK (0xff << 0) +#define STB0899_OFFST_FE_COARSE_TRK 0 +#define STB0899_WIDTH_FE_COARSE_TRK 8 + +#define STB0899_OFF0_UWP_STAT1 0xf328 +#define STB0899_BASE_UWP_STAT1 0x00000400 +#define STB0899_UWP_STATE (0x03ff << 15) +#define STB0899_OFFST_UWP_STATE 15 +#define STB0899_WIDTH_UWP_STATE 10 +#define STB0899_UW_MAX_PEAK (0x7fff << 0) +#define STB0899_OFFST_UW_MAX_PEAK 0 +#define STB0899_WIDTH_UW_MAX_PEAK 15 + +#define STB0899_OFF0_UWP_STAT2 0xf32c +#define STB0899_BASE_UWP_STAT2 0x00000400 +#define STB0899_ESNO_EST (0x07ffff << 7) +#define STB0899_OFFST_ESN0_EST 7 +#define STB0899_WIDTH_ESN0_EST 19 +#define STB0899_UWP_DECODE_MOD (0x7f << 0) +#define STB0899_OFFST_UWP_DECODE_MOD 0 +#define STB0899_WIDTH_UWP_DECODE_MOD 7 + +#define STB0899_OFF0_DMD_CORE_ID 0xf334 +#define STB0899_BASE_DMD_CORE_ID 0x00000400 +#define STB0899_CORE_ID (0xffffffff << 0) +#define STB0899_OFFST_CORE_ID 0 +#define STB0899_WIDTH_CORE_ID 32 + +#define STB0899_OFF0_DMD_VERSION_ID 0xf33c +#define STB0899_BASE_DMD_VERSION_ID 0x00000400 +#define STB0899_VERSION_ID (0xff << 0) +#define STB0899_OFFST_VERSION_ID 0 +#define STB0899_WIDTH_VERSION_ID 8 + +#define STB0899_OFF0_DMD_STAT2 0xf340 +#define STB0899_BASE_DMD_STAT2 0x00000400 +#define STB0899_CSM_LOCK (0x01 << 1) +#define STB0899_OFFST_CSM_LOCK 1 +#define STB0899_WIDTH_CSM_LOCK 1 +#define STB0899_UWP_LOCK (0x01 << 0) +#define STB0899_OFFST_UWP_LOCK 0 +#define STB0899_WIDTH_UWP_LOCK 1 + +#define STB0899_OFF0_FREQ_ADJ_SCALE 0xf344 +#define STB0899_BASE_FREQ_ADJ_SCALE 0x00000400 +#define STB0899_FREQ_ADJ_SCALE (0x0fff << 0) +#define STB0899_OFFST_FREQ_ADJ_SCALE 0 +#define STB0899_WIDTH_FREQ_ADJ_SCALE 12 + +#define STB0899_OFF0_UWP_CNTRL3 0xf34c +#define STB0899_BASE_UWP_CNTRL3 0x00000400 +#define STB0899_UWP_TH_TRACK (0x7fff << 15) +#define STB0899_OFFST_UWP_TH_TRACK 15 +#define STB0899_WIDTH_UWP_TH_TRACK 15 +#define STB0899_UWP_TH_ACQ (0x7fff << 0) +#define STB0899_OFFST_UWP_TH_ACQ 0 +#define STB0899_WIDTH_UWP_TH_ACQ 15 + +#define STB0899_OFF0_SYM_CLK_SEL 0xf350 +#define STB0899_BASE_SYM_CLK_SEL 0x00000400 +#define STB0899_SYM_CLK_SEL (0x03 << 0) +#define STB0899_OFFST_SYM_CLK_SEL 0 +#define STB0899_WIDTH_SYM_CLK_SEL 2 + +#define STB0899_OFF0_SOF_SRCH_TO 0xf354 +#define STB0899_BASE_SOF_SRCH_TO 0x00000400 +#define STB0899_SOF_SEARCH_TIMEOUT (0x3fffff << 0) +#define STB0899_OFFST_SOF_SEARCH_TIMEOUT 0 +#define STB0899_WIDTH_SOF_SEARCH_TIMEOUT 22 + +#define STB0899_OFF0_ACQ_CNTRL1 0xf358 +#define STB0899_BASE_ACQ_CNTRL1 0x00000400 +#define STB0899_FE_FINE_ACQ (0xff << 8) +#define STB0899_OFFST_FE_FINE_ACQ 8 +#define STB0899_WIDTH_FE_FINE_ACQ 8 +#define STB0899_FE_COARSE_ACQ (0xff << 0) +#define STB0899_OFFST_FE_COARSE_ACQ 0 +#define STB0899_WIDTH_FE_COARSE_ACQ 8 + +#define STB0899_OFF0_ACQ_CNTRL2 0xf35c +#define STB0899_BASE_ACQ_CNTRL2 0x00000400 +#define STB0899_ZIGZAG (0x01 << 25) +#define STB0899_OFFST_ZIGZAG 25 +#define STB0899_WIDTH_ZIGZAG 1 +#define STB0899_NUM_STEPS (0xff << 17) +#define STB0899_OFFST_NUM_STEPS 17 +#define STB0899_WIDTH_NUM_STEPS 8 +#define STB0899_FREQ_STEPSIZE (0x1ffff << 0) +#define STB0899_OFFST_FREQ_STEPSIZE 0 +#define STB0899_WIDTH_FREQ_STEPSIZE 17 + +#define STB0899_OFF0_ACQ_CNTRL3 0xf360 +#define STB0899_BASE_ACQ_CNTRL3 0x00000400 +#define STB0899_THRESHOLD_SCL (0x3f << 23) +#define STB0899_OFFST_THRESHOLD_SCL 23 +#define STB0899_WIDTH_THRESHOLD_SCL 6 +#define STB0899_UWP_TH_SRCH (0x7fff << 8) +#define STB0899_OFFST_UWP_TH_SRCH 8 +#define STB0899_WIDTH_UWP_TH_SRCH 15 +#define STB0899_AUTO_REACQUIRE (0x01 << 7) +#define STB0899_OFFST_AUTO_REACQUIRE 7 +#define STB0899_WIDTH_AUTO_REACQUIRE 1 +#define STB0899_TRACK_LOCK_SEL (0x01 << 6) +#define STB0899_OFFST_TRACK_LOCK_SEL 6 +#define STB0899_WIDTH_TRACK_LOCK_SEL 1 +#define STB0899_ACQ_SEARCH_MODE (0x03 << 4) +#define STB0899_OFFST_ACQ_SEARCH_MODE 4 +#define STB0899_WIDTH_ACQ_SEARCH_MODE 2 +#define STB0899_CONFIRM_FRAMES (0x0f << 0) +#define STB0899_OFFST_CONFIRM_FRAMES 0 +#define STB0899_WIDTH_CONFIRM_FRAMES 4 + +#define STB0899_OFF0_FE_SETTLE 0xf364 +#define STB0899_BASE_FE_SETTLE 0x00000400 +#define STB0899_SETTLING_TIME (0x3fffff << 0) +#define STB0899_OFFST_SETTLING_TIME 0 +#define STB0899_WIDTH_SETTLING_TIME 22 + +#define STB0899_OFF0_AC_DWELL 0xf368 +#define STB0899_BASE_AC_DWELL 0x00000400 +#define STB0899_DWELL_TIME (0x3fffff << 0) +#define STB0899_OFFST_DWELL_TIME 0 +#define STB0899_WIDTH_DWELL_TIME 22 + +#define STB0899_OFF0_ACQUIRE_TRIG 0xf36c +#define STB0899_BASE_ACQUIRE_TRIG 0x00000400 +#define STB0899_ACQUIRE (0x01 << 0) +#define STB0899_OFFST_ACQUIRE 0 +#define STB0899_WIDTH_ACQUIRE 1 + +#define STB0899_OFF0_LOCK_LOST 0xf370 +#define STB0899_BASE_LOCK_LOST 0x00000400 +#define STB0899_LOCK_LOST (0x01 << 0) +#define STB0899_OFFST_LOCK_LOST 0 +#define STB0899_WIDTH_LOCK_LOST 1 + +#define STB0899_OFF0_ACQ_STAT1 0xf374 +#define STB0899_BASE_ACQ_STAT1 0x00000400 +#define STB0899_STEP_FREQ (0x1fffff << 11) +#define STB0899_OFFST_STEP_FREQ 11 +#define STB0899_WIDTH_STEP_FREQ 21 +#define STB0899_ACQ_STATE (0x07 << 8) +#define STB0899_OFFST_ACQ_STATE 8 +#define STB0899_WIDTH_ACQ_STATE 3 +#define STB0899_UW_DETECT_COUNT (0xff << 0) +#define STB0899_OFFST_UW_DETECT_COUNT 0 +#define STB0899_WIDTH_UW_DETECT_COUNT 8 + +#define STB0899_OFF0_ACQ_TIMEOUT 0xf378 +#define STB0899_BASE_ACQ_TIMEOUT 0x00000400 +#define STB0899_ACQ_TIMEOUT (0x3fffff << 0) +#define STB0899_OFFST_ACQ_TIMEOUT 0 +#define STB0899_WIDTH_ACQ_TIMEOUT 22 + +#define STB0899_OFF0_ACQ_TIME 0xf37c +#define STB0899_BASE_ACQ_TIME 0x00000400 +#define STB0899_ACQ_TIME_SYM (0xffffff << 0) +#define STB0899_OFFST_ACQ_TIME_SYM 0 +#define STB0899_WIDTH_ACQ_TIME_SYM 24 + +#define STB0899_OFF0_FINAL_AGC_CNTRL 0xf308 +#define STB0899_BASE_FINAL_AGC_CNTRL 0x00000440 +#define STB0899_FINAL_GAIN_INIT (0x3fff << 12) +#define STB0899_OFFST_FINAL_GAIN_INIT 12 +#define STB0899_WIDTH_FINAL_GAIN_INIT 14 +#define STB0899_FINAL_LOOP_GAIN (0x0f << 8) +#define STB0899_OFFST_FINAL_LOOP_GAIN 8 +#define STB0899_WIDTH_FINAL_LOOP_GAIN 4 +#define STB0899_FINAL_LD_GAIN_INIT (0x01 << 7) +#define STB0899_OFFST_FINAL_LD_GAIN_INIT 7 +#define STB0899_WIDTH_FINAL_LD_GAIN_INIT 1 +#define STB0899_FINAL_AGC_REF (0x7f << 0) +#define STB0899_OFFST_FINAL_AGC_REF 0 +#define STB0899_WIDTH_FINAL_AGC_REF 7 + +#define STB0899_OFF0_FINAL_AGC_GAIN 0xf30c +#define STB0899_BASE_FINAL_AGC_GAIN 0x00000440 +#define STB0899_FINAL_AGC_GAIN (0x3fff << 0) +#define STB0899_OFFST_FINAL_AGC_GAIN 0 +#define STB0899_WIDTH_FINAL_AGC_GAIN 14 + +#define STB0899_OFF0_EQUALIZER_INIT 0xf310 +#define STB0899_BASE_EQUALIZER_INIT 0x00000440 +#define STB0899_EQ_SRST (0x01 << 1) +#define STB0899_OFFST_EQ_SRST 1 +#define STB0899_WIDTH_EQ_SRST 1 +#define STB0899_EQ_INIT (0x01 << 0) +#define STB0899_OFFST_EQ_INIT 0 +#define STB0899_WIDTH_EQ_INIT 1 + +#define STB0899_OFF0_EQ_CNTRL 0xf314 +#define STB0899_BASE_EQ_CNTRL 0x00000440 +#define STB0899_EQ_ADAPT_MODE (0x01 << 18) +#define STB0899_OFFST_EQ_ADAPT_MODE 18 +#define STB0899_WIDTH_EQ_ADAPT_MODE 1 +#define STB0899_EQ_DELAY (0x0f << 14) +#define STB0899_OFFST_EQ_DELAY 14 +#define STB0899_WIDTH_EQ_DELAY 4 +#define STB0899_EQ_QUANT_LEVEL (0xff << 6) +#define STB0899_OFFST_EQ_QUANT_LEVEL 6 +#define STB0899_WIDTH_EQ_QUANT_LEVEL 8 +#define STB0899_EQ_DISABLE_UPDATE (0x01 << 5) +#define STB0899_OFFST_EQ_DISABLE_UPDATE 5 +#define STB0899_WIDTH_EQ_DISABLE_UPDATE 1 +#define STB0899_EQ_BYPASS (0x01 << 4) +#define STB0899_OFFST_EQ_BYPASS 4 +#define STB0899_WIDTH_EQ_BYPASS 1 +#define STB0899_EQ_SHIFT (0x0f << 0) +#define STB0899_OFFST_EQ_SHIFT 0 +#define STB0899_WIDTH_EQ_SHIFT 4 + +#define STB0899_OFF0_EQ_I_INIT_COEFF_0 0xf320 +#define STB0899_OFF1_EQ_I_INIT_COEFF_1 0xf324 +#define STB0899_OFF2_EQ_I_INIT_COEFF_2 0xf328 +#define STB0899_OFF3_EQ_I_INIT_COEFF_3 0xf32c +#define STB0899_OFF4_EQ_I_INIT_COEFF_4 0xf330 +#define STB0899_OFF5_EQ_I_INIT_COEFF_5 0xf334 +#define STB0899_OFF6_EQ_I_INIT_COEFF_6 0xf338 +#define STB0899_OFF7_EQ_I_INIT_COEFF_7 0xf33c +#define STB0899_OFF8_EQ_I_INIT_COEFF_8 0xf340 +#define STB0899_OFF9_EQ_I_INIT_COEFF_9 0xf344 +#define STB0899_OFFa_EQ_I_INIT_COEFF_10 0xf348 +#define STB0899_BASE_EQ_I_INIT_COEFF_N 0x00000440 +#define STB0899_EQ_I_INIT_COEFF_N (0x0fff << 0) +#define STB0899_OFFST_EQ_I_INIT_COEFF_N 0 +#define STB0899_WIDTH_EQ_I_INIT_COEFF_N 12 + +#define STB0899_OFF0_EQ_Q_INIT_COEFF_0 0xf350 +#define STB0899_OFF1_EQ_Q_INIT_COEFF_1 0xf354 +#define STB0899_OFF2_EQ_Q_INIT_COEFF_2 0xf358 +#define STB0899_OFF3_EQ_Q_INIT_COEFF_3 0xf35c +#define STB0899_OFF4_EQ_Q_INIT_COEFF_4 0xf360 +#define STB0899_OFF5_EQ_Q_INIT_COEFF_5 0xf364 +#define STB0899_OFF6_EQ_Q_INIT_COEFF_6 0xf368 +#define STB0899_OFF7_EQ_Q_INIT_COEFF_7 0xf36c +#define STB0899_OFF8_EQ_Q_INIT_COEFF_8 0xf370 +#define STB0899_OFF9_EQ_Q_INIT_COEFF_9 0xf374 +#define STB0899_OFFa_EQ_Q_INIT_COEFF_10 0xf378 +#define STB0899_BASE_EQ_Q_INIT_COEFF_N 0x00000440 +#define STB0899_EQ_Q_INIT_COEFF_N (0x0fff << 0) +#define STB0899_OFFST_EQ_Q_INIT_COEFF_N 0 +#define STB0899_WIDTH_EQ_Q_INIT_COEFF_N 12 + +#define STB0899_OFF0_EQ_I_OUT_COEFF_0 0xf300 +#define STB0899_OFF1_EQ_I_OUT_COEFF_1 0xf304 +#define STB0899_OFF2_EQ_I_OUT_COEFF_2 0xf308 +#define STB0899_OFF3_EQ_I_OUT_COEFF_3 0xf30c +#define STB0899_OFF4_EQ_I_OUT_COEFF_4 0xf310 +#define STB0899_OFF5_EQ_I_OUT_COEFF_5 0xf314 +#define STB0899_OFF6_EQ_I_OUT_COEFF_6 0xf318 +#define STB0899_OFF7_EQ_I_OUT_COEFF_7 0xf31c +#define STB0899_OFF8_EQ_I_OUT_COEFF_8 0xf320 +#define STB0899_OFF9_EQ_I_OUT_COEFF_9 0xf324 +#define STB0899_OFFa_EQ_I_OUT_COEFF_10 0xf328 +#define STB0899_BASE_EQ_I_OUT_COEFF_N 0x00000460 +#define STB0899_EQ_I_OUT_COEFF_N (0x0fff << 0) +#define STB0899_OFFST_EQ_I_OUT_COEFF_N 0 +#define STB0899_WIDTH_EQ_I_OUT_COEFF_N 12 + +#define STB0899_OFF0_EQ_Q_OUT_COEFF_0 0xf330 +#define STB0899_OFF1_EQ_Q_OUT_COEFF_1 0xf334 +#define STB0899_OFF2_EQ_Q_OUT_COEFF_2 0xf338 +#define STB0899_OFF3_EQ_Q_OUT_COEFF_3 0xf33c +#define STB0899_OFF4_EQ_Q_OUT_COEFF_4 0xf340 +#define STB0899_OFF5_EQ_Q_OUT_COEFF_5 0xf344 +#define STB0899_OFF6_EQ_Q_OUT_COEFF_6 0xf348 +#define STB0899_OFF7_EQ_Q_OUT_COEFF_7 0xf34c +#define STB0899_OFF8_EQ_Q_OUT_COEFF_8 0xf350 +#define STB0899_OFF9_EQ_Q_OUT_COEFF_9 0xf354 +#define STB0899_OFFa_EQ_Q_OUT_COEFF_10 0xf358 +#define STB0899_BASE_EQ_Q_OUT_COEFF_N 0x00000460 +#define STB0899_EQ_Q_OUT_COEFF_N (0x0fff << 0) +#define STB0899_OFFST_EQ_Q_OUT_COEFF_N 0 +#define STB0899_WIDTH_EQ_Q_OUT_COEFF_N 12 + +/* S2 FEC */ +#define STB0899_OFF0_BLOCK_LNGTH 0xfa04 +#define STB0899_BASE_BLOCK_LNGTH 0x00000000 +#define STB0899_BLOCK_LENGTH (0xff << 0) +#define STB0899_OFFST_BLOCK_LENGTH 0 +#define STB0899_WIDTH_BLOCK_LENGTH 8 + +#define STB0899_OFF0_ROW_STR 0xfa08 +#define STB0899_BASE_ROW_STR 0x00000000 +#define STB0899_ROW_STRIDE (0xff << 0) +#define STB0899_OFFST_ROW_STRIDE 0 +#define STB0899_WIDTH_ROW_STRIDE 8 + +#define STB0899_OFF0_MAX_ITER 0xfa0c +#define STB0899_BASE_MAX_ITER 0x00000000 +#define STB0899_MAX_ITERATIONS (0xff << 0) +#define STB0899_OFFST_MAX_ITERATIONS 0 +#define STB0899_WIDTH_MAX_ITERATIONS 8 + +#define STB0899_OFF0_BN_END_ADDR 0xfa10 +#define STB0899_BASE_BN_END_ADDR 0x00000000 +#define STB0899_BN_END_ADDR (0x0fff << 0) +#define STB0899_OFFST_BN_END_ADDR 0 +#define STB0899_WIDTH_BN_END_ADDR 12 + +#define STB0899_OFF0_CN_END_ADDR 0xfa14 +#define STB0899_BASE_CN_END_ADDR 0x00000000 +#define STB0899_CN_END_ADDR (0x0fff << 0) +#define STB0899_OFFST_CN_END_ADDR 0 +#define STB0899_WIDTH_CN_END_ADDR 12 + +#define STB0899_OFF0_INFO_LENGTH 0xfa1c +#define STB0899_BASE_INFO_LENGTH 0x00000000 +#define STB0899_INFO_LENGTH (0xff << 0) +#define STB0899_OFFST_INFO_LENGTH 0 +#define STB0899_WIDTH_INFO_LENGTH 8 + +#define STB0899_OFF0_BOT_ADDR 0xfa20 +#define STB0899_BASE_BOT_ADDR 0x00000000 +#define STB0899_BOTTOM_BASE_ADDR (0x03ff << 0) +#define STB0899_OFFST_BOTTOM_BASE_ADDR 0 +#define STB0899_WIDTH_BOTTOM_BASE_ADDR 10 + +#define STB0899_OFF0_BCH_BLK_LN 0xfa24 +#define STB0899_BASE_BCH_BLK_LN 0x00000000 +#define STB0899_BCH_BLOCK_LENGTH (0xffff << 0) +#define STB0899_OFFST_BCH_BLOCK_LENGTH 0 +#define STB0899_WIDTH_BCH_BLOCK_LENGTH 16 + +#define STB0899_OFF0_BCH_T 0xfa28 +#define STB0899_BASE_BCH_T 0x00000000 +#define STB0899_BCH_T (0x0f << 0) +#define STB0899_OFFST_BCH_T 0 +#define STB0899_WIDTH_BCH_T 4 + +#define STB0899_OFF0_CNFG_MODE 0xfa00 +#define STB0899_BASE_CNFG_MODE 0x00000800 +#define STB0899_MODCOD (0x1f << 2) +#define STB0899_OFFST_MODCOD 2 +#define STB0899_WIDTH_MODCOD 5 +#define STB0899_MODCOD_SEL (0x01 << 1) +#define STB0899_OFFST_MODCOD_SEL 1 +#define STB0899_WIDTH_MODCOD_SEL 1 +#define STB0899_CONFIG_MODE (0x01 << 0) +#define STB0899_OFFST_CONFIG_MODE 0 +#define STB0899_WIDTH_CONFIG_MODE 1 + +#define STB0899_OFF0_LDPC_STAT 0xfa04 +#define STB0899_BASE_LDPC_STAT 0x00000800 +#define STB0899_ITERATION (0xff << 3) +#define STB0899_OFFST_ITERATION 3 +#define STB0899_WIDTH_ITERATION 8 +#define STB0899_LDPC_DEC_STATE (0x07 << 0) +#define STB0899_OFFST_LDPC_DEC_STATE 0 +#define STB0899_WIDTH_LDPC_DEC_STATE 3 + +#define STB0899_OFF0_ITER_SCALE 0xfa08 +#define STB0899_BASE_ITER_SCALE 0x00000800 +#define STB0899_ITERATION_SCALE (0xff << 0) +#define STB0899_OFFST_ITERATION_SCALE 0 +#define STB0899_WIDTH_ITERATION_SCALE 8 + +#define STB0899_OFF0_INPUT_MODE 0xfa0c +#define STB0899_BASE_INPUT_MODE 0x00000800 +#define STB0899_SD_BLOCK1_STREAM0 (0x01 << 0) +#define STB0899_OFFST_SD_BLOCK1_STREAM0 0 +#define STB0899_WIDTH_SD_BLOCK1_STREAM0 1 + +#define STB0899_OFF0_LDPCDECRST 0xfa10 +#define STB0899_BASE_LDPCDECRST 0x00000800 +#define STB0899_LDPC_DEC_RST (0x01 << 0) +#define STB0899_OFFST_LDPC_DEC_RST 0 +#define STB0899_WIDTH_LDPC_DEC_RST 1 + +#define STB0899_OFF0_CLK_PER_BYTE_RW 0xfa14 +#define STB0899_BASE_CLK_PER_BYTE_RW 0x00000800 +#define STB0899_CLKS_PER_BYTE (0x0f << 0) +#define STB0899_OFFST_CLKS_PER_BYTE 0 +#define STB0899_WIDTH_CLKS_PER_BYTE 5 + +#define STB0899_OFF0_BCH_ERRORS 0xfa18 +#define STB0899_BASE_BCH_ERRORS 0x00000800 +#define STB0899_BCH_ERRORS (0x0f << 0) +#define STB0899_OFFST_BCH_ERRORS 0 +#define STB0899_WIDTH_BCH_ERRORS 4 + +#define STB0899_OFF0_LDPC_ERRORS 0xfa1c +#define STB0899_BASE_LDPC_ERRORS 0x00000800 +#define STB0899_LDPC_ERRORS (0xffff << 0) +#define STB0899_OFFST_LDPC_ERRORS 0 +#define STB0899_WIDTH_LDPC_ERRORS 16 + +#define STB0899_OFF0_BCH_MODE 0xfa20 +#define STB0899_BASE_BCH_MODE 0x00000800 +#define STB0899_BCH_CORRECT_N (0x01 << 1) +#define STB0899_OFFST_BCH_CORRECT_N 1 +#define STB0899_WIDTH_BCH_CORRECT_N 1 +#define STB0899_FULL_BYPASS (0x01 << 0) +#define STB0899_OFFST_FULL_BYPASS 0 +#define STB0899_WIDTH_FULL_BYPASS 1 + +#define STB0899_OFF0_ERR_ACC_PER 0xfa24 +#define STB0899_BASE_ERR_ACC_PER 0x00000800 +#define STB0899_BCH_ERR_ACC_PERIOD (0x0f << 0) +#define STB0899_OFFST_BCH_ERR_ACC_PERIOD 0 +#define STB0899_WIDTH_BCH_ERR_ACC_PERIOD 4 + +#define STB0899_OFF0_BCH_ERR_ACC 0xfa28 +#define STB0899_BASE_BCH_ERR_ACC 0x00000800 +#define STB0899_BCH_ERR_ACCUM (0xff << 0) +#define STB0899_OFFST_BCH_ERR_ACCUM 0 +#define STB0899_WIDTH_BCH_ERR_ACCUM 8 + +#define STB0899_OFF0_FEC_CORE_ID_REG 0xfa2c +#define STB0899_BASE_FEC_CORE_ID_REG 0x00000800 +#define STB0899_FEC_CORE_ID (0xffffffff << 0) +#define STB0899_OFFST_FEC_CORE_ID 0 +#define STB0899_WIDTH_FEC_CORE_ID 32 + +#define STB0899_OFF0_FEC_VER_ID_REG 0xfa34 +#define STB0899_BASE_FEC_VER_ID_REG 0x00000800 +#define STB0899_FEC_VER_ID (0xff << 0) +#define STB0899_OFFST_FEC_VER_ID 0 +#define STB0899_WIDTH_FEC_VER_ID 8 + +#define STB0899_OFF0_FEC_TP_SEL 0xfa38 +#define STB0899_BASE_FEC_TP_SEL 0x00000800 + +#define STB0899_OFF0_CSM_CNTRL1 0xf310 +#define STB0899_BASE_CSM_CNTRL1 0x00000400 +#define STB0899_CSM_FORCE_FREQLOCK (0x01 << 19) +#define STB0899_OFFST_CSM_FORCE_FREQLOCK 19 +#define STB0899_WIDTH_CSM_FORCE_FREQLOCK 1 +#define STB0899_CSM_FREQ_LOCKSTATE (0x01 << 18) +#define STB0899_OFFST_CSM_FREQ_LOCKSTATE 18 +#define STB0899_WIDTH_CSM_FREQ_LOCKSTATE 1 +#define STB0899_CSM_AUTO_PARAM (0x01 << 17) +#define STB0899_OFFST_CSM_AUTO_PARAM 17 +#define STB0899_WIDTH_CSM_AUTO_PARAM 1 +#define STB0899_FE_LOOP_SHIFT (0x07 << 14) +#define STB0899_OFFST_FE_LOOP_SHIFT 14 +#define STB0899_WIDTH_FE_LOOP_SHIFT 3 +#define STB0899_CSM_AGC_SHIFT (0x07 << 11) +#define STB0899_OFFST_CSM_AGC_SHIFT 11 +#define STB0899_WIDTH_CSM_AGC_SHIFT 3 +#define STB0899_CSM_AGC_GAIN (0x1ff << 2) +#define STB0899_OFFST_CSM_AGC_GAIN 2 +#define STB0899_WIDTH_CSM_AGC_GAIN 9 +#define STB0899_CSM_TWO_PASS (0x01 << 1) +#define STB0899_OFFST_CSM_TWO_PASS 1 +#define STB0899_WIDTH_CSM_TWO_PASS 1 +#define STB0899_CSM_DVT_TABLE (0x01 << 0) +#define STB0899_OFFST_CSM_DVT_TABLE 0 +#define STB0899_WIDTH_CSM_DVT_TABLE 1 + +#define STB0899_OFF0_CSM_CNTRL2 0xf314 +#define STB0899_BASE_CSM_CNTRL2 0x00000400 +#define STB0899_CSM_GAMMA_RHO_ACQ (0x1ff << 9) +#define STB0899_OFFST_CSM_GAMMA_RHOACQ 9 +#define STB0899_WIDTH_CSM_GAMMA_RHOACQ 9 +#define STB0899_CSM_GAMMA_ACQ (0x1ff << 0) +#define STB0899_OFFST_CSM_GAMMA_ACQ 0 +#define STB0899_WIDTH_CSM_GAMMA_ACQ 9 + +#define STB0899_OFF0_CSM_CNTRL3 0xf318 +#define STB0899_BASE_CSM_CNTRL3 0x00000400 +#define STB0899_CSM_GAMMA_RHO_TRACK (0x1ff << 9) +#define STB0899_OFFST_CSM_GAMMA_RHOTRACK 9 +#define STB0899_WIDTH_CSM_GAMMA_RHOTRACK 9 +#define STB0899_CSM_GAMMA_TRACK (0x1ff << 0) +#define STB0899_OFFST_CSM_GAMMA_TRACK 0 +#define STB0899_WIDTH_CSM_GAMMA_TRACK 9 + +#define STB0899_OFF0_CSM_CNTRL4 0xf31c +#define STB0899_BASE_CSM_CNTRL4 0x00000400 +#define STB0899_CSM_PHASEDIFF_THRESH (0x0f << 8) +#define STB0899_OFFST_CSM_PHASEDIFF_THRESH 8 +#define STB0899_WIDTH_CSM_PHASEDIFF_THRESH 4 +#define STB0899_CSM_LOCKCOUNT_THRESH (0xff << 0) +#define STB0899_OFFST_CSM_LOCKCOUNT_THRESH 0 +#define STB0899_WIDTH_CSM_LOCKCOUNT_THRESH 8 + +/* Check on chapter 8 page 42 */ +#define STB0899_ERRCTRL1 0xf574 +#define STB0899_ERRCTRL2 0xf575 +#define STB0899_ERRCTRL3 0xf576 +#define STB0899_ERR_SRC_S1 (0x1f << 3) +#define STB0899_OFFST_ERR_SRC_S1 3 +#define STB0899_WIDTH_ERR_SRC_S1 5 +#define STB0899_ERR_SRC_S2 (0x0f << 0) +#define STB0899_OFFST_ERR_SRC_S2 0 +#define STB0899_WIDTH_ERR_SRC_S2 4 +#define STB0899_NOE (0x07 << 0) +#define STB0899_OFFST_NOE 0 +#define STB0899_WIDTH_NOE 3 + +#define STB0899_ECNT1M 0xf524 +#define STB0899_ECNT1L 0xf525 +#define STB0899_ECNT2M 0xf526 +#define STB0899_ECNT2L 0xf527 +#define STB0899_ECNT3M 0xf528 +#define STB0899_ECNT3L 0xf529 + +#define STB0899_DMONMSK1 0xf57b +#define STB0899_DMONMSK1_WAIT_1STEP (1 << 7) +#define STB0899_DMONMSK1_FREE_14 (1 << 6) +#define STB0899_DMONMSK1_AVRGVIT_CALC (1 << 5) +#define STB0899_DMONMSK1_FREE_12 (1 << 4) +#define STB0899_DMONMSK1_FREE_11 (1 << 3) +#define STB0899_DMONMSK1_B0DIV_CALC (1 << 2) +#define STB0899_DMONMSK1_KDIVB1_CALC (1 << 1) +#define STB0899_DMONMSK1_KDIVB2_CALC (1 << 0) + +#define STB0899_DMONMSK0 0xf57c +#define STB0899_DMONMSK0_SMOTTH_CALC (1 << 7) +#define STB0899_DMONMSK0_FREE_6 (1 << 6) +#define STB0899_DMONMSK0_SIGPOWER_CALC (1 << 5) +#define STB0899_DMONMSK0_QSEUIL_CALC (1 << 4) +#define STB0899_DMONMSK0_FREE_3 (1 << 3) +#define STB0899_DMONMSK0_FREE_2 (1 << 2) +#define STB0899_DMONMSK0_KVDIVB1_CALC (1 << 1) +#define STB0899_DMONMSK0_KVDIVB2_CALC (1 << 0) + +#define STB0899_TSULC 0xf549 +#define STB0899_ULNOSYNCBYTES (0x01 << 7) +#define STB0899_OFFST_ULNOSYNCBYTES 7 +#define STB0899_WIDTH_ULNOSYNCBYTES 1 +#define STB0899_ULPARITY_ON (0x01 << 6) +#define STB0899_OFFST_ULPARITY_ON 6 +#define STB0899_WIDTH_ULPARITY_ON 1 +#define STB0899_ULSYNCOUTRS (0x01 << 5) +#define STB0899_OFFST_ULSYNCOUTRS 5 +#define STB0899_WIDTH_ULSYNCOUTRS 1 +#define STB0899_ULDSS_PACKETS (0x01 << 0) +#define STB0899_OFFST_ULDSS_PACKETS 0 +#define STB0899_WIDTH_ULDSS_PACKETS 1 + +#define STB0899_TSLPL 0xf54b +#define STB0899_LLDVBS2_MODE (0x01 << 4) +#define STB0899_OFFST_LLDVBS2_MODE 4 +#define STB0899_WIDTH_LLDVBS2_MODE 1 +#define STB0899_LLISSYI_ON (0x01 << 3) +#define STB0899_OFFST_LLISSYI_ON 3 +#define STB0899_WIDTH_LLISSYI_ON 1 +#define STB0899_LLNPD_ON (0x01 << 2) +#define STB0899_OFFST_LLNPD_ON 2 +#define STB0899_WIDTH_LLNPD_ON 1 +#define STB0899_LLCRC8_ON (0x01 << 1) +#define STB0899_OFFST_LLCRC8_ON 1 +#define STB0899_WIDTH_LLCRC8_ON 1 + +#define STB0899_TSCFGH 0xf54c +#define STB0899_OUTRS_PS (0x01 << 6) +#define STB0899_OFFST_OUTRS_PS 6 +#define STB0899_WIDTH_OUTRS_PS 1 +#define STB0899_SYNCBYTE (0x01 << 5) +#define STB0899_OFFST_SYNCBYTE 5 +#define STB0899_WIDTH_SYNCBYTE 1 +#define STB0899_PFBIT (0x01 << 4) +#define STB0899_OFFST_PFBIT 4 +#define STB0899_WIDTH_PFBIT 1 +#define STB0899_ERR_BIT (0x01 << 3) +#define STB0899_OFFST_ERR_BIT 3 +#define STB0899_WIDTH_ERR_BIT 1 +#define STB0899_MPEG (0x01 << 2) +#define STB0899_OFFST_MPEG 2 +#define STB0899_WIDTH_MPEG 1 +#define STB0899_CLK_POL (0x01 << 1) +#define STB0899_OFFST_CLK_POL 1 +#define STB0899_WIDTH_CLK_POL 1 +#define STB0899_FORCE0 (0x01 << 0) +#define STB0899_OFFST_FORCE0 0 +#define STB0899_WIDTH_FORCE0 1 + +#define STB0899_TSCFGM 0xf54d +#define STB0899_LLPRIORITY (0x01 << 3) +#define STB0899_OFFST_LLPRIORIY 3 +#define STB0899_WIDTH_LLPRIORITY 1 +#define STB0899_EN188 (0x01 << 2) +#define STB0899_OFFST_EN188 2 +#define STB0899_WIDTH_EN188 1 + +#define STB0899_TSCFGL 0xf54e +#define STB0899_DEL_ERRPCK (0x01 << 7) +#define STB0899_OFFST_DEL_ERRPCK 7 +#define STB0899_WIDTH_DEL_ERRPCK 1 +#define STB0899_ERRFLAGSTD (0x01 << 5) +#define STB0899_OFFST_ERRFLAGSTD 5 +#define STB0899_WIDTH_ERRFLAGSTD 1 +#define STB0899_MPEGERR (0x01 << 4) +#define STB0899_OFFST_MPEGERR 4 +#define STB0899_WIDTH_MPEGERR 1 +#define STB0899_BCH_CHK (0x01 << 3) +#define STB0899_OFFST_BCH_CHK 5 +#define STB0899_WIDTH_BCH_CHK 1 +#define STB0899_CRC8CHK (0x01 << 2) +#define STB0899_OFFST_CRC8CHK 2 +#define STB0899_WIDTH_CRC8CHK 1 +#define STB0899_SPEC_INFO (0x01 << 1) +#define STB0899_OFFST_SPEC_INFO 1 +#define STB0899_WIDTH_SPEC_INFO 1 +#define STB0899_LOW_PRIO_CLK (0x01 << 0) +#define STB0899_OFFST_LOW_PRIO_CLK 0 +#define STB0899_WIDTH_LOW_PRIO_CLK 1 +#define STB0899_ERROR_NORM (0x00 << 0) +#define STB0899_OFFST_ERROR_NORM 0 +#define STB0899_WIDTH_ERROR_NORM 0 + +#define STB0899_TSOUT 0xf54f +#define STB0899_RSSYNCDEL 0xf550 +#define STB0899_TSINHDELH 0xf551 +#define STB0899_TSINHDELM 0xf552 +#define STB0899_TSINHDELL 0xf553 +#define STB0899_TSLLSTKM 0xf55a +#define STB0899_TSLLSTKL 0xf55b +#define STB0899_TSULSTKM 0xf55c +#define STB0899_TSULSTKL 0xf55d +#define STB0899_TSSTATUS 0xf561 + +#define STB0899_PDELCTRL 0xf600 +#define STB0899_INVERT_RES (0x01 << 7) +#define STB0899_OFFST_INVERT_RES 7 +#define STB0899_WIDTH_INVERT_RES 1 +#define STB0899_FORCE_ACCEPTED (0x01 << 6) +#define STB0899_OFFST_FORCE_ACCEPTED 6 +#define STB0899_WIDTH_FORCE_ACCEPTED 1 +#define STB0899_FILTER_EN (0x01 << 5) +#define STB0899_OFFST_FILTER_EN 5 +#define STB0899_WIDTH_FILTER_EN 1 +#define STB0899_LOCKFALL_THRESH (0x01 << 4) +#define STB0899_OFFST_LOCKFALL_THRESH 4 +#define STB0899_WIDTH_LOCKFALL_THRESH 1 +#define STB0899_HYST_EN (0x01 << 3) +#define STB0899_OFFST_HYST_EN 3 +#define STB0899_WIDTH_HYST_EN 1 +#define STB0899_HYST_SWRST (0x01 << 2) +#define STB0899_OFFST_HYST_SWRST 2 +#define STB0899_WIDTH_HYST_SWRST 1 +#define STB0899_ALGO_EN (0x01 << 1) +#define STB0899_OFFST_ALGO_EN 1 +#define STB0899_WIDTH_ALGO_EN 1 +#define STB0899_ALGO_SWRST (0x01 << 0) +#define STB0899_OFFST_ALGO_SWRST 0 +#define STB0899_WIDTH_ALGO_SWRST 1 + +#define STB0899_PDELCTRL2 0xf601 +#define STB0899_BBHCTRL1 0xf602 +#define STB0899_BBHCTRL2 0xf603 +#define STB0899_HYSTTHRESH 0xf604 + +#define STB0899_MATCSTM 0xf605 +#define STB0899_MATCSTL 0xf606 +#define STB0899_UPLCSTM 0xf607 +#define STB0899_UPLCSTL 0xf608 +#define STB0899_DFLCSTM 0xf609 +#define STB0899_DFLCSTL 0xf60a +#define STB0899_SYNCCST 0xf60b +#define STB0899_SYNCDCSTM 0xf60c +#define STB0899_SYNCDCSTL 0xf60d +#define STB0899_ISI_ENTRY 0xf60e +#define STB0899_ISI_BIT_EN 0xf60f +#define STB0899_MATSTRM 0xf610 +#define STB0899_MATSTRL 0xf611 +#define STB0899_UPLSTRM 0xf612 +#define STB0899_UPLSTRL 0xf613 +#define STB0899_DFLSTRM 0xf614 +#define STB0899_DFLSTRL 0xf615 +#define STB0899_SYNCSTR 0xf616 +#define STB0899_SYNCDSTRM 0xf617 +#define STB0899_SYNCDSTRL 0xf618 + +#define STB0899_CFGPDELSTATUS1 0xf619 +#define STB0899_BADDFL (0x01 << 6) +#define STB0899_OFFST_BADDFL 6 +#define STB0899_WIDTH_BADDFL 1 +#define STB0899_CONTINUOUS_STREAM (0x01 << 5) +#define STB0899_OFFST_CONTINUOUS_STREAM 5 +#define STB0899_WIDTH_CONTINUOUS_STREAM 1 +#define STB0899_ACCEPTED_STREAM (0x01 << 4) +#define STB0899_OFFST_ACCEPTED_STREAM 4 +#define STB0899_WIDTH_ACCEPTED_STREAM 1 +#define STB0899_BCH_ERRFLAG (0x01 << 3) +#define STB0899_OFFST_BCH_ERRFLAG 3 +#define STB0899_WIDTH_BCH_ERRFLAG 1 +#define STB0899_CRCRES (0x01 << 2) +#define STB0899_OFFST_CRCRES 2 +#define STB0899_WIDTH_CRCRES 1 +#define STB0899_CFGPDELSTATUS_LOCK (0x01 << 1) +#define STB0899_OFFST_CFGPDELSTATUS_LOCK 1 +#define STB0899_WIDTH_CFGPDELSTATUS_LOCK 1 +#define STB0899_1STLOCK (0x01 << 0) +#define STB0899_OFFST_1STLOCK 0 +#define STB0899_WIDTH_1STLOCK 1 + +#define STB0899_CFGPDELSTATUS2 0xf61a +#define STB0899_BBFERRORM 0xf61b +#define STB0899_BBFERRORL 0xf61c +#define STB0899_UPKTERRORM 0xf61d +#define STB0899_UPKTERRORL 0xf61e + +#define STB0899_TSTCK 0xff10 + +#define STB0899_TSTRES 0xff11 +#define STB0899_FRESLDPC (0x01 << 7) +#define STB0899_OFFST_FRESLDPC 7 +#define STB0899_WIDTH_FRESLDPC 1 +#define STB0899_FRESRS (0x01 << 6) +#define STB0899_OFFST_FRESRS 6 +#define STB0899_WIDTH_FRESRS 1 +#define STB0899_FRESVIT (0x01 << 5) +#define STB0899_OFFST_FRESVIT 5 +#define STB0899_WIDTH_FRESVIT 1 +#define STB0899_FRESMAS1_2 (0x01 << 4) +#define STB0899_OFFST_FRESMAS1_2 4 +#define STB0899_WIDTH_FRESMAS1_2 1 +#define STB0899_FRESACS (0x01 << 3) +#define STB0899_OFFST_FRESACS 3 +#define STB0899_WIDTH_FRESACS 1 +#define STB0899_FRESSYM (0x01 << 2) +#define STB0899_OFFST_FRESSYM 2 +#define STB0899_WIDTH_FRESSYM 1 +#define STB0899_FRESMAS (0x01 << 1) +#define STB0899_OFFST_FRESMAS 1 +#define STB0899_WIDTH_FRESMAS 1 +#define STB0899_FRESINT (0x01 << 0) +#define STB0899_OFFST_FRESINIT 0 +#define STB0899_WIDTH_FRESINIT 1 + +#define STB0899_TSTOUT 0xff12 +#define STB0899_EN_SIGNATURE (0x01 << 7) +#define STB0899_OFFST_EN_SIGNATURE 7 +#define STB0899_WIDTH_EN_SIGNATURE 1 +#define STB0899_BCLK_CLK (0x01 << 6) +#define STB0899_OFFST_BCLK_CLK 6 +#define STB0899_WIDTH_BCLK_CLK 1 +#define STB0899_SGNL_OUT (0x01 << 5) +#define STB0899_OFFST_SGNL_OUT 5 +#define STB0899_WIDTH_SGNL_OUT 1 +#define STB0899_TS (0x01 << 4) +#define STB0899_OFFST_TS 4 +#define STB0899_WIDTH_TS 1 +#define STB0899_CTEST (0x01 << 0) +#define STB0899_OFFST_CTEST 0 +#define STB0899_WIDTH_CTEST 1 + +#define STB0899_TSTIN 0xff13 +#define STB0899_TEST_IN (0x01 << 7) +#define STB0899_OFFST_TEST_IN 7 +#define STB0899_WIDTH_TEST_IN 1 +#define STB0899_EN_ADC (0x01 << 6) +#define STB0899_OFFST_EN_ADC 6 +#define STB0899_WIDTH_ENADC 1 +#define STB0899_SGN_ADC (0x01 << 5) +#define STB0899_OFFST_SGN_ADC 5 +#define STB0899_WIDTH_SGN_ADC 1 +#define STB0899_BCLK_IN (0x01 << 4) +#define STB0899_OFFST_BCLK_IN 4 +#define STB0899_WIDTH_BCLK_IN 1 +#define STB0899_JETONIN_MODE (0x01 << 3) +#define STB0899_OFFST_JETONIN_MODE 3 +#define STB0899_WIDTH_JETONIN_MODE 1 +#define STB0899_BCLK_VALUE (0x01 << 2) +#define STB0899_OFFST_BCLK_VALUE 2 +#define STB0899_WIDTH_BCLK_VALUE 1 +#define STB0899_SGNRST_T12 (0x01 << 1) +#define STB0899_OFFST_SGNRST_T12 1 +#define STB0899_WIDTH_SGNRST_T12 1 +#define STB0899_LOWSP_ENAX (0x01 << 0) +#define STB0899_OFFST_LOWSP_ENAX 0 +#define STB0899_WIDTH_LOWSP_ENAX 1 + +#define STB0899_TSTSYS 0xff14 +#define STB0899_TSTCHIP 0xff15 +#define STB0899_TSTFREE 0xff16 +#define STB0899_TSTI2C 0xff17 +#define STB0899_BITSPEEDM 0xff1c +#define STB0899_BITSPEEDL 0xff1d +#define STB0899_TBUSBIT 0xff1e +#define STB0899_TSTDIS 0xff24 +#define STB0899_TSTDISRX 0xff25 +#define STB0899_TSTJETON 0xff28 +#define STB0899_TSTDCADJ 0xff40 +#define STB0899_TSTAGC1 0xff41 +#define STB0899_TSTAGC1N 0xff42 +#define STB0899_TSTPOLYPH 0xff48 +#define STB0899_TSTR 0xff49 +#define STB0899_TSTAGC2 0xff4a +#define STB0899_TSTCTL1 0xff4b +#define STB0899_TSTCTL2 0xff4c +#define STB0899_TSTCTL3 0xff4d +#define STB0899_TSTDEMAP 0xff50 +#define STB0899_TSTDEMAP2 0xff51 +#define STB0899_TSTDEMMON 0xff52 +#define STB0899_TSTRATE 0xff53 +#define STB0899_TSTSELOUT 0xff54 +#define STB0899_TSYNC 0xff55 +#define STB0899_TSTERR 0xff56 +#define STB0899_TSTRAM1 0xff58 +#define STB0899_TSTVSELOUT 0xff59 +#define STB0899_TSTFORCEIN 0xff5a +#define STB0899_TSTRS1 0xff5c +#define STB0899_TSTRS2 0xff5d +#define STB0899_TSTRS3 0xff53 + +#define STB0899_INTBUFSTATUS 0xf200 +#define STB0899_INTBUFCTRL 0xf201 +#define STB0899_PCKLENUL 0xf55e +#define STB0899_PCKLENLL 0xf55f +#define STB0899_RSPCKLEN 0xf560 + +/* 2 registers */ +#define STB0899_SYNCDCST 0xf60c + +/* DiSEqC */ +#define STB0899_DISCNTRL1 0xf0a0 +#define STB0899_TIMOFF (0x01 << 7) +#define STB0899_OFFST_TIMOFF 7 +#define STB0899_WIDTH_TIMOFF 1 +#define STB0899_DISEQCRESET (0x01 << 6) +#define STB0899_OFFST_DISEQCRESET 6 +#define STB0899_WIDTH_DISEQCRESET 1 +#define STB0899_TIMCMD (0x03 << 4) +#define STB0899_OFFST_TIMCMD 4 +#define STB0899_WIDTH_TIMCMD 2 +#define STB0899_DISPRECHARGE (0x01 << 2) +#define STB0899_OFFST_DISPRECHARGE 2 +#define STB0899_WIDTH_DISPRECHARGE 1 +#define STB0899_DISEQCMODE (0x03 << 0) +#define STB0899_OFFST_DISEQCMODE 0 +#define STB0899_WIDTH_DISEQCMODE 2 + +#define STB0899_DISCNTRL2 0xf0a1 +#define STB0899_RECEIVER_ON (0x01 << 7) +#define STB0899_OFFST_RECEIVER_ON 7 +#define STB0899_WIDTH_RECEIVER_ON 1 +#define STB0899_IGNO_SHORT_22K (0x01 << 6) +#define STB0899_OFFST_IGNO_SHORT_22K 6 +#define STB0899_WIDTH_IGNO_SHORT_22K 1 +#define STB0899_ONECHIP_TRX (0x01 << 5) +#define STB0899_OFFST_ONECHIP_TRX 5 +#define STB0899_WIDTH_ONECHIP_TRX 1 +#define STB0899_EXT_ENVELOP (0x01 << 4) +#define STB0899_OFFST_EXT_ENVELOP 4 +#define STB0899_WIDTH_EXT_ENVELOP 1 +#define STB0899_PIN_SELECT (0x03 << 2) +#define STB0899_OFFST_PIN_SELCT 2 +#define STB0899_WIDTH_PIN_SELCT 2 +#define STB0899_IRQ_RXEND (0x01 << 1) +#define STB0899_OFFST_IRQ_RXEND 1 +#define STB0899_WIDTH_IRQ_RXEND 1 +#define STB0899_IRQ_4NBYTES (0x01 << 0) +#define STB0899_OFFST_IRQ_4NBYTES 0 +#define STB0899_WIDTH_IRQ_4NBYTES 1 + +#define STB0899_DISRX_ST0 0xf0a4 +#define STB0899_RXEND (0x01 << 7) +#define STB0899_OFFST_RXEND 7 +#define STB0899_WIDTH_RXEND 1 +#define STB0899_RXACTIVE (0x01 << 6) +#define STB0899_OFFST_RXACTIVE 6 +#define STB0899_WIDTH_RXACTIVE 1 +#define STB0899_SHORT22K (0x01 << 5) +#define STB0899_OFFST_SHORT22K 5 +#define STB0899_WIDTH_SHORT22K 1 +#define STB0899_CONTTONE (0x01 << 4) +#define STB0899_OFFST_CONTTONE 4 +#define STB0899_WIDTH_CONTONE 1 +#define STB0899_4BFIFOREDY (0x01 << 3) +#define STB0899_OFFST_4BFIFOREDY 3 +#define STB0899_WIDTH_4BFIFOREDY 1 +#define STB0899_FIFOEMPTY (0x01 << 2) +#define STB0899_OFFST_FIFOEMPTY 2 +#define STB0899_WIDTH_FIFOEMPTY 1 +#define STB0899_ABORTTRX (0x01 << 0) +#define STB0899_OFFST_ABORTTRX 0 +#define STB0899_WIDTH_ABORTTRX 1 + +#define STB0899_DISRX_ST1 0xf0a5 +#define STB0899_RXFAIL (0x01 << 7) +#define STB0899_OFFST_RXFAIL 7 +#define STB0899_WIDTH_RXFAIL 1 +#define STB0899_FIFOPFAIL (0x01 << 6) +#define STB0899_OFFST_FIFOPFAIL 6 +#define STB0899_WIDTH_FIFOPFAIL 1 +#define STB0899_RXNONBYTES (0x01 << 5) +#define STB0899_OFFST_RXNONBYTES 5 +#define STB0899_WIDTH_RXNONBYTES 1 +#define STB0899_FIFOOVF (0x01 << 4) +#define STB0899_OFFST_FIFOOVF 4 +#define STB0899_WIDTH_FIFOOVF 1 +#define STB0899_FIFOBYTENBR (0x0f << 0) +#define STB0899_OFFST_FIFOBYTENBR 0 +#define STB0899_WIDTH_FIFOBYTENBR 4 + +#define STB0899_DISPARITY 0xf0a6 + +#define STB0899_DISFIFO 0xf0a7 + +#define STB0899_DISSTATUS 0xf0a8 +#define STB0899_FIFOFULL (0x01 << 6) +#define STB0899_OFFST_FIFOFULL 6 +#define STB0899_WIDTH_FIFOFULL 1 +#define STB0899_TXIDLE (0x01 << 5) +#define STB0899_OFFST_TXIDLE 5 +#define STB0899_WIDTH_TXIDLE 1 +#define STB0899_GAPBURST (0x01 << 4) +#define STB0899_OFFST_GAPBURST 4 +#define STB0899_WIDTH_GAPBURST 1 +#define STB0899_TXFIFOBYTES (0x0f << 0) +#define STB0899_OFFST_TXFIFOBYTES 0 +#define STB0899_WIDTH_TXFIFOBYTES 4 +#define STB0899_DISF22 0xf0a9 + +#define STB0899_DISF22RX 0xf0aa + +/* General Purpose */ +#define STB0899_SYSREG 0xf101 +#define STB0899_ACRPRESC 0xf110 +#define STB0899_OFFST_RSVD2 7 +#define STB0899_WIDTH_RSVD2 1 +#define STB0899_OFFST_ACRPRESC 4 +#define STB0899_WIDTH_ACRPRESC 3 +#define STB0899_OFFST_RSVD1 3 +#define STB0899_WIDTH_RSVD1 1 +#define STB0899_OFFST_ACRPRESC2 0 +#define STB0899_WIDTH_ACRPRESC2 3 + +#define STB0899_ACRDIV1 0xf111 +#define STB0899_ACRDIV2 0xf112 +#define STB0899_DACR1 0xf113 +#define STB0899_DACR2 0xf114 +#define STB0899_OUTCFG 0xf11c +#define STB0899_MODECFG 0xf11d +#define STB0899_NCOARSE 0xf1b3 + +#define STB0899_SYNTCTRL 0xf1b6 +#define STB0899_STANDBY (0x01 << 7) +#define STB0899_OFFST_STANDBY 7 +#define STB0899_WIDTH_STANDBY 1 +#define STB0899_BYPASSPLL (0x01 << 6) +#define STB0899_OFFST_BYPASSPLL 6 +#define STB0899_WIDTH_BYPASSPLL 1 +#define STB0899_SEL1XRATIO (0x01 << 5) +#define STB0899_OFFST_SEL1XRATIO 5 +#define STB0899_WIDTH_SEL1XRATIO 1 +#define STB0899_SELOSCI (0x01 << 1) +#define STB0899_OFFST_SELOSCI 1 +#define STB0899_WIDTH_SELOSCI 1 + +#define STB0899_FILTCTRL 0xf1b7 +#define STB0899_SYSCTRL 0xf1b8 + +#define STB0899_STOPCLK1 0xf1c2 +#define STB0899_STOP_CKINTBUF108 (0x01 << 7) +#define STB0899_OFFST_STOP_CKINTBUF108 7 +#define STB0899_WIDTH_STOP_CKINTBUF108 1 +#define STB0899_STOP_CKINTBUF216 (0x01 << 6) +#define STB0899_OFFST_STOP_CKINTBUF216 6 +#define STB0899_WIDTH_STOP_CKINTBUF216 1 +#define STB0899_STOP_CHK8PSK (0x01 << 5) +#define STB0899_OFFST_STOP_CHK8PSK 5 +#define STB0899_WIDTH_STOP_CHK8PSK 1 +#define STB0899_STOP_CKFEC108 (0x01 << 4) +#define STB0899_OFFST_STOP_CKFEC108 4 +#define STB0899_WIDTH_STOP_CKFEC108 1 +#define STB0899_STOP_CKFEC216 (0x01 << 3) +#define STB0899_OFFST_STOP_CKFEC216 3 +#define STB0899_WIDTH_STOP_CKFEC216 1 +#define STB0899_STOP_CKCORE216 (0x01 << 2) +#define STB0899_OFFST_STOP_CKCORE216 2 +#define STB0899_WIDTH_STOP_CKCORE216 1 +#define STB0899_STOP_CKADCI108 (0x01 << 1) +#define STB0899_OFFST_STOP_CKADCI108 1 +#define STB0899_WIDTH_STOP_CKADCI108 1 +#define STB0899_STOP_INVCKADCI108 (0x01 << 0) +#define STB0899_OFFST_STOP_INVCKADCI108 0 +#define STB0899_WIDTH_STOP_INVCKADCI108 1 + +#define STB0899_STOPCLK2 0xf1c3 +#define STB0899_STOP_CKS2DMD108 (0x01 << 2) +#define STB0899_OFFST_STOP_CKS2DMD108 2 +#define STB0899_WIDTH_STOP_CKS2DMD108 1 +#define STB0899_STOP_CKPKDLIN108 (0x01 << 1) +#define STB0899_OFFST_STOP_CKPKDLIN108 1 +#define STB0899_WIDTH_STOP_CKPKDLIN108 1 +#define STB0899_STOP_CKPKDLIN216 (0x01 << 0) +#define STB0899_OFFST_STOP_CKPKDLIN216 0 +#define STB0899_WIDTH_STOP_CKPKDLIN216 1 + +#define STB0899_TSTTNR1 0xf1e0 +#define STB0899_BYPASS_ADC (0x01 << 7) +#define STB0899_OFFST_BYPASS_ADC 7 +#define STB0899_WIDTH_BYPASS_ADC 1 +#define STB0899_INVADCICKOUT (0x01 << 6) +#define STB0899_OFFST_INVADCICKOUT 6 +#define STB0899_WIDTH_INVADCICKOUT 1 +#define STB0899_ADCTEST_VOLTAGE (0x03 << 4) +#define STB0899_OFFST_ADCTEST_VOLTAGE 4 +#define STB0899_WIDTH_ADCTEST_VOLTAGE 1 +#define STB0899_ADC_RESET (0x01 << 3) +#define STB0899_OFFST_ADC_RESET 3 +#define STB0899_WIDTH_ADC_RESET 1 +#define STB0899_TSTTNR1_2 (0x01 << 2) +#define STB0899_OFFST_TSTTNR1_2 2 +#define STB0899_WIDTH_TSTTNR1_2 1 +#define STB0899_ADCPON (0x01 << 1) +#define STB0899_OFFST_ADCPON 1 +#define STB0899_WIDTH_ADCPON 1 +#define STB0899_ADCIN_MODE (0x01 << 0) +#define STB0899_OFFST_ADCIN_MODE 0 +#define STB0899_WIDTH_ADCIN_MODE 1 + +#define STB0899_TSTTNR2 0xf1e1 +#define STB0899_TSTTNR2_7 (0x01 << 7) +#define STB0899_OFFST_TSTTNR2_7 7 +#define STB0899_WIDTH_TSTTNR2_7 1 +#define STB0899_NOT_DISRX_WIRED (0x01 << 6) +#define STB0899_OFFST_NOT_DISRX_WIRED 6 +#define STB0899_WIDTH_NOT_DISRX_WIRED 1 +#define STB0899_DISEQC_DCURRENT (0x01 << 5) +#define STB0899_OFFST_DISEQC_DCURRENT 5 +#define STB0899_WIDTH_DISEQC_DCURRENT 1 +#define STB0899_DISEQC_ZCURRENT (0x01 << 4) +#define STB0899_OFFST_DISEQC_ZCURRENT 4 +#define STB0899_WIDTH_DISEQC_ZCURRENT 1 +#define STB0899_DISEQC_SINC_SOURCE (0x03 << 2) +#define STB0899_OFFST_DISEQC_SINC_SOURCE 2 +#define STB0899_WIDTH_DISEQC_SINC_SOURCE 2 +#define STB0899_SELIQSRC (0x03 << 0) +#define STB0899_OFFST_SELIQSRC 0 +#define STB0899_WIDTH_SELIQSRC 2 + +#define STB0899_TSTTNR3 0xf1e2 + +#define STB0899_I2CCFG 0xf129 +#define STB0899_I2CCFGRSVD (0x0f << 4) +#define STB0899_OFFST_I2CCFGRSVD 4 +#define STB0899_WIDTH_I2CCFGRSVD 4 +#define STB0899_I2CFASTMODE (0x01 << 3) +#define STB0899_OFFST_I2CFASTMODE 3 +#define STB0899_WIDTH_I2CFASTMODE 1 +#define STB0899_STATUSWR (0x01 << 2) +#define STB0899_OFFST_STATUSWR 2 +#define STB0899_WIDTH_STATUSWR 1 +#define STB0899_I2CADDRINC (0x03 << 0) +#define STB0899_OFFST_I2CADDRINC 0 +#define STB0899_WIDTH_I2CADDRINC 2 + +#define STB0899_I2CRPT 0xf12a +#define STB0899_I2CTON (0x01 << 7) +#define STB0899_OFFST_I2CTON 7 +#define STB0899_WIDTH_I2CTON 1 +#define STB0899_ENARPTLEVEL (0x01 << 6) +#define STB0899_OFFST_ENARPTLEVEL 6 +#define STB0899_WIDTH_ENARPTLEVEL 2 +#define STB0899_SCLTDELAY (0x01 << 3) +#define STB0899_OFFST_SCLTDELAY 3 +#define STB0899_WIDTH_SCLTDELAY 1 +#define STB0899_STOPENA (0x01 << 2) +#define STB0899_OFFST_STOPENA 2 +#define STB0899_WIDTH_STOPENA 1 +#define STB0899_STOPSDAT2SDA (0x01 << 1) +#define STB0899_OFFST_STOPSDAT2SDA 1 +#define STB0899_WIDTH_STOPSDAT2SDA 1 + +#define STB0899_IOPVALUE8 0xf136 +#define STB0899_IOPVALUE7 0xf137 +#define STB0899_IOPVALUE6 0xf138 +#define STB0899_IOPVALUE5 0xf139 +#define STB0899_IOPVALUE4 0xf13a +#define STB0899_IOPVALUE3 0xf13b +#define STB0899_IOPVALUE2 0xf13c +#define STB0899_IOPVALUE1 0xf13d +#define STB0899_IOPVALUE0 0xf13e + +#define STB0899_GPIO00CFG 0xf140 + +#define STB0899_GPIO01CFG 0xf141 +#define STB0899_GPIO02CFG 0xf142 +#define STB0899_GPIO03CFG 0xf143 +#define STB0899_GPIO04CFG 0xf144 +#define STB0899_GPIO05CFG 0xf145 +#define STB0899_GPIO06CFG 0xf146 +#define STB0899_GPIO07CFG 0xf147 +#define STB0899_GPIO08CFG 0xf148 +#define STB0899_GPIO09CFG 0xf149 +#define STB0899_GPIO10CFG 0xf14a +#define STB0899_GPIO11CFG 0xf14b +#define STB0899_GPIO12CFG 0xf14c +#define STB0899_GPIO13CFG 0xf14d +#define STB0899_GPIO14CFG 0xf14e +#define STB0899_GPIO15CFG 0xf14f +#define STB0899_GPIO16CFG 0xf150 +#define STB0899_GPIO17CFG 0xf151 +#define STB0899_GPIO18CFG 0xf152 +#define STB0899_GPIO19CFG 0xf153 +#define STB0899_GPIO20CFG 0xf154 + +#define STB0899_SDATCFG 0xf155 +#define STB0899_SCLTCFG 0xf156 +#define STB0899_AGCRFCFG 0xf157 +#define STB0899_GPIO22 0xf158 /* AGCBB2CFG */ +#define STB0899_GPIO21 0xf159 /* AGCBB1CFG */ +#define STB0899_DIRCLKCFG 0xf15a +#define STB0899_CLKOUT27CFG 0xf15b +#define STB0899_STDBYCFG 0xf15c +#define STB0899_CS0CFG 0xf15d +#define STB0899_CS1CFG 0xf15e +#define STB0899_DISEQCOCFG 0xf15f + +#define STB0899_GPIO32CFG 0xf160 +#define STB0899_GPIO33CFG 0xf161 +#define STB0899_GPIO34CFG 0xf162 +#define STB0899_GPIO35CFG 0xf163 +#define STB0899_GPIO36CFG 0xf164 +#define STB0899_GPIO37CFG 0xf165 +#define STB0899_GPIO38CFG 0xf166 +#define STB0899_GPIO39CFG 0xf167 + +#define STB0899_IRQSTATUS_3 0xf120 +#define STB0899_IRQSTATUS_2 0xf121 +#define STB0899_IRQSTATUS_1 0xf122 +#define STB0899_IRQSTATUS_0 0xf123 + +#define STB0899_IRQMSK_3 0xf124 +#define STB0899_IRQMSK_2 0xf125 +#define STB0899_IRQMSK_1 0xf126 +#define STB0899_IRQMSK_0 0xf127 + +#define STB0899_IRQCFG 0xf128 + +#define STB0899_GHOSTREG 0xf000 + +#define STB0899_S2DEMOD 0xf3fc +#define STB0899_S2FEC 0xfafc + + +#endif diff --git a/drivers/media/dvb-frontends/stb6000.c b/drivers/media/dvb-frontends/stb6000.c new file mode 100644 index 00000000..a0c3c526 --- /dev/null +++ b/drivers/media/dvb-frontends/stb6000.c @@ -0,0 +1,256 @@ + /* + Driver for ST STB6000 DVBS Silicon tuner + + Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#include +#include +#include +#include + +#include "stb6000.h" + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "stb6000: " args); \ + } while (0) + +struct stb6000_priv { + /* i2c details */ + int i2c_address; + struct i2c_adapter *i2c; + u32 frequency; +}; + +static int stb6000_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int stb6000_sleep(struct dvb_frontend *fe) +{ + struct stb6000_priv *priv = fe->tuner_priv; + int ret; + u8 buf[] = { 10, 0 }; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + dprintk("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret == 1) ? 0 : ret; +} + +static int stb6000_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stb6000_priv *priv = fe->tuner_priv; + unsigned int n, m; + int ret; + u32 freq_mhz; + int bandwidth; + u8 buf[12]; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 12 + }; + + dprintk("%s:\n", __func__); + + freq_mhz = p->frequency / 1000; + bandwidth = p->symbol_rate / 1000000; + + if (bandwidth > 31) + bandwidth = 31; + + if ((freq_mhz > 949) && (freq_mhz < 2151)) { + buf[0] = 0x01; + buf[1] = 0xac; + if (freq_mhz < 1950) + buf[1] = 0xaa; + if (freq_mhz < 1800) + buf[1] = 0xa8; + if (freq_mhz < 1650) + buf[1] = 0xa6; + if (freq_mhz < 1530) + buf[1] = 0xa5; + if (freq_mhz < 1470) + buf[1] = 0xa4; + if (freq_mhz < 1370) + buf[1] = 0xa2; + if (freq_mhz < 1300) + buf[1] = 0xa1; + if (freq_mhz < 1200) + buf[1] = 0xa0; + if (freq_mhz < 1075) + buf[1] = 0xbc; + if (freq_mhz < 1000) + buf[1] = 0xba; + if (freq_mhz < 1075) { + n = freq_mhz / 8; /* vco=lo*4 */ + m = 2; + } else { + n = freq_mhz / 16; /* vco=lo*2 */ + m = 1; + } + buf[2] = n >> 1; + buf[3] = (unsigned char)(((n & 1) << 7) | + (m * freq_mhz - n * 16) | 0x60); + buf[4] = 0x04; + buf[5] = 0x0e; + + buf[6] = (unsigned char)(bandwidth); + + buf[7] = 0xd8; + buf[8] = 0xd0; + buf[9] = 0x50; + buf[10] = 0xeb; + buf[11] = 0x4f; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + udelay(10); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + buf[0] = 0x07; + buf[1] = 0xdf; + buf[2] = 0xd0; + buf[3] = 0x50; + buf[4] = 0xfb; + msg.len = 5; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + udelay(10); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + priv->frequency = freq_mhz * 1000; + + return (ret == 1) ? 0 : ret; + } + return -1; +} + +static int stb6000_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct stb6000_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static struct dvb_tuner_ops stb6000_tuner_ops = { + .info = { + .name = "ST STB6000", + .frequency_min = 950000, + .frequency_max = 2150000 + }, + .release = stb6000_release, + .sleep = stb6000_sleep, + .set_params = stb6000_set_params, + .get_frequency = stb6000_get_frequency, +}; + +struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr, + struct i2c_adapter *i2c) +{ + struct stb6000_priv *priv = NULL; + u8 b0[] = { 0 }; + u8 b1[] = { 0, 0 }; + struct i2c_msg msg[2] = { + { + .addr = addr, + .flags = 0, + .buf = b0, + .len = 0 + }, { + .addr = addr, + .flags = I2C_M_RD, + .buf = b1, + .len = 2 + } + }; + int ret; + + dprintk("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + /* is some i2c device here ? */ + ret = i2c_transfer(i2c, msg, 2); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (ret != 2) + return NULL; + + priv = kzalloc(sizeof(struct stb6000_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = addr; + priv->i2c = i2c; + + memcpy(&fe->ops.tuner_ops, &stb6000_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = priv; + + return fe; +} +EXPORT_SYMBOL(stb6000_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("DVB STB6000 driver"); +MODULE_AUTHOR("Igor M. Liplianin "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/stb6000.h b/drivers/media/dvb-frontends/stb6000.h new file mode 100644 index 00000000..a768189b --- /dev/null +++ b/drivers/media/dvb-frontends/stb6000.h @@ -0,0 +1,51 @@ + /* + Driver for ST stb6000 DVBS Silicon tuner + + Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#ifndef __DVB_STB6000_H__ +#define __DVB_STB6000_H__ + +#include +#include +#include "dvb_frontend.h" + +/** + * Attach a stb6000 tuner to the supplied frontend structure. + * + * @param fe Frontend to attach to. + * @param addr i2c address of the tuner. + * @param i2c i2c adapter to use. + * @return FE pointer on success, NULL on failure. + */ +#if IS_ENABLED(CONFIG_DVB_STB6000) +extern struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, + int addr, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_STB6000 */ + +#endif /* __DVB_STB6000_H__ */ diff --git a/drivers/media/dvb-frontends/stb6100.c b/drivers/media/dvb-frontends/stb6100.c new file mode 100644 index 00000000..cea175d1 --- /dev/null +++ b/drivers/media/dvb-frontends/stb6100.c @@ -0,0 +1,616 @@ +/* + STB6100 Silicon Tuner + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "stb6100.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +#define FE_ERROR 0 +#define FE_NOTICE 1 +#define FE_INFO 2 +#define FE_DEBUG 3 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((x > FE_ERROR) && (x > y)) \ + printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ + else if ((x > FE_NOTICE) && (x > y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ + else if ((x > FE_INFO) && (x > y)) \ + printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ + else if ((x > FE_DEBUG) && (x > y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ + } else { \ + if (x > y) \ + printk(format, ##arg); \ + } \ +} while (0) + +struct stb6100_lkup { + u32 val_low; + u32 val_high; + u8 reg; +}; + +static int stb6100_release(struct dvb_frontend *fe); + +static const struct stb6100_lkup lkup[] = { + { 0, 950000, 0x0a }, + { 950000, 1000000, 0x0a }, + { 1000000, 1075000, 0x0c }, + { 1075000, 1200000, 0x00 }, + { 1200000, 1300000, 0x01 }, + { 1300000, 1370000, 0x02 }, + { 1370000, 1470000, 0x04 }, + { 1470000, 1530000, 0x05 }, + { 1530000, 1650000, 0x06 }, + { 1650000, 1800000, 0x08 }, + { 1800000, 1950000, 0x0a }, + { 1950000, 2150000, 0x0c }, + { 2150000, 9999999, 0x0c }, + { 0, 0, 0x00 } +}; + +/* Register names for easy debugging. */ +static const char *stb6100_regnames[] = { + [STB6100_LD] = "LD", + [STB6100_VCO] = "VCO", + [STB6100_NI] = "NI", + [STB6100_NF_LSB] = "NF", + [STB6100_K] = "K", + [STB6100_G] = "G", + [STB6100_F] = "F", + [STB6100_DLB] = "DLB", + [STB6100_TEST1] = "TEST1", + [STB6100_FCCK] = "FCCK", + [STB6100_LPEN] = "LPEN", + [STB6100_TEST3] = "TEST3", +}; + +/* Template for normalisation, i.e. setting unused or undocumented + * bits as required according to the documentation. + */ +struct stb6100_regmask { + u8 mask; + u8 set; +}; + +static const struct stb6100_regmask stb6100_template[] = { + [STB6100_LD] = { 0xff, 0x00 }, + [STB6100_VCO] = { 0xff, 0x00 }, + [STB6100_NI] = { 0xff, 0x00 }, + [STB6100_NF_LSB] = { 0xff, 0x00 }, + [STB6100_K] = { 0xc7, 0x38 }, + [STB6100_G] = { 0xef, 0x10 }, + [STB6100_F] = { 0x1f, 0xc0 }, + [STB6100_DLB] = { 0x38, 0xc4 }, + [STB6100_TEST1] = { 0x00, 0x8f }, + [STB6100_FCCK] = { 0x40, 0x0d }, + [STB6100_LPEN] = { 0xf0, 0x0b }, + [STB6100_TEST3] = { 0x00, 0xde }, +}; + +/* + * Currently unused. Some boards might need it in the future + */ +static inline void stb6100_normalise_regs(u8 regs[]) +{ + int i; + + for (i = 0; i < STB6100_NUMREGS; i++) + regs[i] = (regs[i] & stb6100_template[i].mask) | stb6100_template[i].set; +} + +static int stb6100_read_regs(struct stb6100_state *state, u8 regs[]) +{ + int rc; + struct i2c_msg msg = { + .addr = state->config->tuner_address, + .flags = I2C_M_RD, + .buf = regs, + .len = STB6100_NUMREGS + }; + + rc = i2c_transfer(state->i2c, &msg, 1); + if (unlikely(rc != 1)) { + dprintk(verbose, FE_ERROR, 1, "Read (0x%x) err, rc=[%d]", + state->config->tuner_address, rc); + + return -EREMOTEIO; + } + if (unlikely(verbose > FE_DEBUG)) { + int i; + + dprintk(verbose, FE_DEBUG, 1, " Read from 0x%02x", state->config->tuner_address); + for (i = 0; i < STB6100_NUMREGS; i++) + dprintk(verbose, FE_DEBUG, 1, " %s: 0x%02x", stb6100_regnames[i], regs[i]); + } + return 0; +} + +static int stb6100_read_reg(struct stb6100_state *state, u8 reg) +{ + u8 regs[STB6100_NUMREGS]; + + struct i2c_msg msg = { + .addr = state->config->tuner_address + reg, + .flags = I2C_M_RD, + .buf = regs, + .len = 1 + }; + + i2c_transfer(state->i2c, &msg, 1); + + if (unlikely(reg >= STB6100_NUMREGS)) { + dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg); + return -EINVAL; + } + if (unlikely(verbose > FE_DEBUG)) { + dprintk(verbose, FE_DEBUG, 1, " Read from 0x%02x", state->config->tuner_address); + dprintk(verbose, FE_DEBUG, 1, " %s: 0x%02x", stb6100_regnames[reg], regs[0]); + } + + return (unsigned int)regs[0]; +} + +static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len) +{ + int rc; + u8 cmdbuf[MAX_XFER_SIZE]; + struct i2c_msg msg = { + .addr = state->config->tuner_address, + .flags = 0, + .buf = cmdbuf, + .len = len + 1 + }; + + if (1 + len > sizeof(buf)) { + printk(KERN_WARNING + "%s: i2c wr: len=%d is too big!\n", + KBUILD_MODNAME, len); + return -EINVAL; + } + + if (unlikely(start < 1 || start + len > STB6100_NUMREGS)) { + dprintk(verbose, FE_ERROR, 1, "Invalid register range %d:%d", + start, len); + return -EINVAL; + } + memcpy(&cmdbuf[1], buf, len); + cmdbuf[0] = start; + + if (unlikely(verbose > FE_DEBUG)) { + int i; + + dprintk(verbose, FE_DEBUG, 1, " Write @ 0x%02x: [%d:%d]", state->config->tuner_address, start, len); + for (i = 0; i < len; i++) + dprintk(verbose, FE_DEBUG, 1, " %s: 0x%02x", stb6100_regnames[start + i], buf[i]); + } + rc = i2c_transfer(state->i2c, &msg, 1); + if (unlikely(rc != 1)) { + dprintk(verbose, FE_ERROR, 1, "(0x%x) write err [%d:%d], rc=[%d]", + (unsigned int)state->config->tuner_address, start, len, rc); + return -EREMOTEIO; + } + return 0; +} + +static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data) +{ + if (unlikely(reg >= STB6100_NUMREGS)) { + dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg); + return -EREMOTEIO; + } + data = (data & stb6100_template[reg].mask) | stb6100_template[reg].set; + return stb6100_write_reg_range(state, &data, reg, 1); +} + + +static int stb6100_get_status(struct dvb_frontend *fe, u32 *status) +{ + int rc; + struct stb6100_state *state = fe->tuner_priv; + + rc = stb6100_read_reg(state, STB6100_LD); + if (rc < 0) { + dprintk(verbose, FE_ERROR, 1, "%s failed", __func__); + return rc; + } + return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0; +} + +static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + int rc; + u8 f; + struct stb6100_state *state = fe->tuner_priv; + + rc = stb6100_read_reg(state, STB6100_F); + if (rc < 0) + return rc; + f = rc & STB6100_F_F; + + state->status.bandwidth = (f + 5) * 2000; /* x2 for ZIF */ + + *bandwidth = state->bandwidth = state->status.bandwidth * 1000; + dprintk(verbose, FE_DEBUG, 1, "bandwidth = %u Hz", state->bandwidth); + return 0; +} + +static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth) +{ + u32 tmp; + int rc; + struct stb6100_state *state = fe->tuner_priv; + + dprintk(verbose, FE_DEBUG, 1, "set bandwidth to %u Hz", bandwidth); + + bandwidth /= 2; /* ZIF */ + + if (bandwidth >= 36000000) /* F[4:0] BW/2 max =31+5=36 mhz for F=31 */ + tmp = 31; + else if (bandwidth <= 5000000) /* bw/2 min = 5Mhz for F=0 */ + tmp = 0; + else /* if 5 < bw/2 < 36 */ + tmp = (bandwidth + 500000) / 1000000 - 5; + + /* Turn on LPF bandwidth setting clock control, + * set bandwidth, wait 10ms, turn off. + */ + rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK); + if (rc < 0) + return rc; + rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp); + if (rc < 0) + return rc; + + msleep(5); /* This is dangerous as another (related) thread may start */ + + rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d); + if (rc < 0) + return rc; + + msleep(10); /* This is dangerous as another (related) thread may start */ + + return 0; +} + +static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + int rc; + u32 nint, nfrac, fvco; + int psd2, odiv; + struct stb6100_state *state = fe->tuner_priv; + u8 regs[STB6100_NUMREGS]; + + rc = stb6100_read_regs(state, regs); + if (rc < 0) + return rc; + + odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT; + psd2 = (regs[STB6100_K] & STB6100_K_PSD2) >> STB6100_K_PSD2_SHIFT; + nint = regs[STB6100_NI]; + nfrac = ((regs[STB6100_K] & STB6100_K_NF_MSB) << 8) | regs[STB6100_NF_LSB]; + fvco = (nfrac * state->reference >> (9 - psd2)) + (nint * state->reference << psd2); + *frequency = state->frequency = fvco >> (odiv + 1); + + dprintk(verbose, FE_DEBUG, 1, + "frequency = %u kHz, odiv = %u, psd2 = %u, fxtal = %u kHz, fvco = %u kHz, N(I) = %u, N(F) = %u", + state->frequency, odiv, psd2, state->reference, fvco, nint, nfrac); + return 0; +} + + +static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency) +{ + int rc; + const struct stb6100_lkup *ptr; + struct stb6100_state *state = fe->tuner_priv; + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + + u32 srate = 0, fvco, nint, nfrac; + u8 regs[STB6100_NUMREGS]; + u8 g, psd2, odiv; + + dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51"); + + if (fe->ops.get_frontend) { + dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters"); + fe->ops.get_frontend(fe); + } + srate = p->symbol_rate; + + /* Set up tuner cleanly, LPF calibration on */ + rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK); + if (rc < 0) + return rc; /* allow LPF calibration */ + + /* PLL Loop disabled, bias on, VCO on, synth on */ + regs[STB6100_LPEN] = 0xeb; + rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]); + if (rc < 0) + return rc; + + /* Program the registers with their data values */ + + /* VCO divide ratio (LO divide ratio, VCO prescaler enable). */ + if (frequency <= 1075000) + odiv = 1; + else + odiv = 0; + + /* VCO enabled, search clock off as per LL3.7, 3.4.1 */ + regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT); + + /* OSM */ + for (ptr = lkup; + (ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high); + ptr++); + + if (ptr->val_high == 0) { + printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency); + return -EINVAL; + } + regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg; + rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]); + if (rc < 0) + return rc; + + if ((frequency > 1075000) && (frequency <= 1325000)) + psd2 = 0; + else + psd2 = 1; + /* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4) */ + fvco = frequency << (1 + odiv); + /* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1))) */ + nint = fvco / (state->reference << psd2); + /* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9 */ + nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2)) + << (9 - psd2), state->reference); + + /* NI */ + regs[STB6100_NI] = nint; + rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]); + if (rc < 0) + return rc; + + /* NF */ + regs[STB6100_NF_LSB] = nfrac; + rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]); + if (rc < 0) + return rc; + + /* K */ + regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT); + regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB); + rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]); + if (rc < 0) + return rc; + + /* G Baseband gain. */ + if (srate >= 15000000) + g = 9; /* +4 dB */ + else if (srate >= 5000000) + g = 11; /* +8 dB */ + else + g = 14; /* +14 dB */ + + regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g; + regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */ + regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */ + rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]); + if (rc < 0) + return rc; + + /* F we don't write as it is set up in BW set */ + + /* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */ + regs[STB6100_DLB] = 0xcc; + rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]); + if (rc < 0) + return rc; + + dprintk(verbose, FE_DEBUG, 1, + "frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u", + frequency, srate, (unsigned int)g, (unsigned int)odiv, + (unsigned int)psd2, state->reference, + ptr->reg, fvco, nint, nfrac); + + /* Set up the test registers */ + regs[STB6100_TEST1] = 0x8f; + rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]); + if (rc < 0) + return rc; + regs[STB6100_TEST3] = 0xde; + rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]); + if (rc < 0) + return rc; + + /* Bring up tuner according to LLA 3.7 3.4.1, step 2 */ + regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */ + rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]); + if (rc < 0) + return rc; + + msleep(2); + + /* Bring up tuner according to LLA 3.7 3.4.1, step 3 */ + regs[STB6100_VCO] &= ~STB6100_VCO_OCK; /* VCO fast search */ + rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]); + if (rc < 0) + return rc; + + msleep(10); /* This is dangerous as another (related) thread may start */ /* wait for LO to lock */ + + regs[STB6100_VCO] &= ~STB6100_VCO_OSCH; /* vco search disabled */ + regs[STB6100_VCO] |= STB6100_VCO_OCK; /* search clock off */ + rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]); + if (rc < 0) + return rc; + + rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d); + if (rc < 0) + return rc; /* Stop LPF calibration */ + + msleep(10); /* This is dangerous as another (related) thread may start */ + /* wait for stabilisation, (should not be necessary) */ + return 0; +} + +static int stb6100_sleep(struct dvb_frontend *fe) +{ + /* TODO: power down */ + return 0; +} + +static int stb6100_init(struct dvb_frontend *fe) +{ + struct stb6100_state *state = fe->tuner_priv; + struct tuner_state *status = &state->status; + + status->tunerstep = 125000; + status->ifreq = 0; + status->refclock = 27000000; /* Hz */ + status->iqsense = 1; + status->bandwidth = 36000; /* kHz */ + state->bandwidth = status->bandwidth * 1000; /* Hz */ + state->reference = status->refclock / 1000; /* kHz */ + + /* Set default bandwidth. Modified, PN 13-May-10 */ + return 0; +} + +static int stb6100_get_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *state) +{ + switch (param) { + case DVBFE_TUNER_FREQUENCY: + stb6100_get_frequency(fe, &state->frequency); + break; + case DVBFE_TUNER_TUNERSTEP: + break; + case DVBFE_TUNER_IFFREQ: + break; + case DVBFE_TUNER_BANDWIDTH: + stb6100_get_bandwidth(fe, &state->bandwidth); + break; + case DVBFE_TUNER_REFCLOCK: + break; + default: + break; + } + + return 0; +} + +static int stb6100_set_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *state) +{ + struct stb6100_state *tstate = fe->tuner_priv; + + switch (param) { + case DVBFE_TUNER_FREQUENCY: + stb6100_set_frequency(fe, state->frequency); + tstate->frequency = state->frequency; + break; + case DVBFE_TUNER_TUNERSTEP: + break; + case DVBFE_TUNER_IFFREQ: + break; + case DVBFE_TUNER_BANDWIDTH: + stb6100_set_bandwidth(fe, state->bandwidth); + tstate->bandwidth = state->bandwidth; + break; + case DVBFE_TUNER_REFCLOCK: + break; + default: + break; + } + + return 0; +} + +static struct dvb_tuner_ops stb6100_ops = { + .info = { + .name = "STB6100 Silicon Tuner", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_step = 0, + }, + + .init = stb6100_init, + .sleep = stb6100_sleep, + .get_status = stb6100_get_status, + .get_state = stb6100_get_state, + .set_state = stb6100_set_state, + .release = stb6100_release +}; + +struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe, + const struct stb6100_config *config, + struct i2c_adapter *i2c) +{ + struct stb6100_state *state = NULL; + + state = kzalloc(sizeof (struct stb6100_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->i2c = i2c; + state->frontend = fe; + state->reference = config->refclock / 1000; /* kHz */ + fe->tuner_priv = state; + fe->ops.tuner_ops = stb6100_ops; + + printk("%s: Attaching STB6100 \n", __func__); + return fe; +} + +static int stb6100_release(struct dvb_frontend *fe) +{ + struct stb6100_state *state = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(state); + + return 0; +} + +EXPORT_SYMBOL(stb6100_attach); +MODULE_PARM_DESC(verbose, "Set Verbosity level"); + +MODULE_AUTHOR("Manu Abraham"); +MODULE_DESCRIPTION("STB6100 Silicon tuner"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/stb6100.h b/drivers/media/dvb-frontends/stb6100.h new file mode 100644 index 00000000..3a1e40f3 --- /dev/null +++ b/drivers/media/dvb-frontends/stb6100.h @@ -0,0 +1,115 @@ +/* + STB6100 Silicon Tuner + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STB_6100_REG_H +#define __STB_6100_REG_H + +#include +#include "dvb_frontend.h" + +#define STB6100_LD 0x00 +#define STB6100_LD_LOCK (1 << 0) + +#define STB6100_VCO 0x01 +#define STB6100_VCO_OSCH (0x01 << 7) +#define STB6100_VCO_OSCH_SHIFT 7 +#define STB6100_VCO_OCK (0x03 << 5) +#define STB6100_VCO_OCK_SHIFT 5 +#define STB6100_VCO_ODIV (0x01 << 4) +#define STB6100_VCO_ODIV_SHIFT 4 +#define STB6100_VCO_OSM (0x0f << 0) + +#define STB6100_NI 0x02 +#define STB6100_NF_LSB 0x03 + +#define STB6100_K 0x04 +#define STB6100_K_PSD2 (0x01 << 2) +#define STB6100_K_PSD2_SHIFT 2 +#define STB6100_K_NF_MSB (0x03 << 0) + +#define STB6100_G 0x05 +#define STB6100_G_G (0x0f << 0) +#define STB6100_G_GCT (0x07 << 5) + +#define STB6100_F 0x06 +#define STB6100_F_F (0x1f << 0) + +#define STB6100_DLB 0x07 + +#define STB6100_TEST1 0x08 + +#define STB6100_FCCK 0x09 +#define STB6100_FCCK_FCCK (0x01 << 6) + +#define STB6100_LPEN 0x0a +#define STB6100_LPEN_LPEN (0x01 << 4) +#define STB6100_LPEN_SYNP (0x01 << 5) +#define STB6100_LPEN_OSCP (0x01 << 6) +#define STB6100_LPEN_BEN (0x01 << 7) + +#define STB6100_TEST3 0x0b + +#define STB6100_NUMREGS 0x0c + + +#define INRANGE(val, x, y) (((x <= val) && (val <= y)) || \ + ((y <= val) && (val <= x)) ? 1 : 0) + +#define CHKRANGE(val, x, y) (((val >= x) && (val < y)) ? 1 : 0) + +struct stb6100_config { + u8 tuner_address; + u32 refclock; +}; + +struct stb6100_state { + struct i2c_adapter *i2c; + + const struct stb6100_config *config; + struct dvb_tuner_ops ops; + struct dvb_frontend *frontend; + struct tuner_state status; + + u32 frequency; + u32 srate; + u32 bandwidth; + u32 reference; +}; + +#if IS_ENABLED(CONFIG_DVB_STB6100) + +extern struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe, + const struct stb6100_config *config, + struct i2c_adapter *i2c); + +#else + +static inline struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe, + const struct stb6100_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif //CONFIG_DVB_STB6100 + +#endif diff --git a/drivers/media/dvb-frontends/stb6100_cfg.h b/drivers/media/dvb-frontends/stb6100_cfg.h new file mode 100644 index 00000000..6314d18c --- /dev/null +++ b/drivers/media/dvb-frontends/stb6100_cfg.h @@ -0,0 +1,104 @@ +/* + STB6100 Silicon Tuner + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state t_state; + int err = 0; + + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->get_state) { + if ((err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &t_state)) < 0) { + printk("%s: Invalid parameter\n", __func__); + return err; + } + *frequency = t_state.frequency; + } + return 0; +} + +static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state t_state; + int err = 0; + + t_state.frequency = frequency; + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->set_state) { + if ((err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &t_state)) < 0) { + printk("%s: Invalid parameter\n", __func__); + return err; + } + } + return 0; +} + +static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct dvb_frontend_ops *frontend_ops = &fe->ops; + struct dvb_tuner_ops *tuner_ops = &frontend_ops->tuner_ops; + struct tuner_state t_state; + int err = 0; + + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->get_state) { + if ((err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state)) < 0) { + printk("%s: Invalid parameter\n", __func__); + return err; + } + *bandwidth = t_state.bandwidth; + } + return 0; +} + +static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state t_state; + int err = 0; + + t_state.bandwidth = bandwidth; + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->set_state) { + if ((err = tuner_ops->set_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state)) < 0) { + printk("%s: Invalid parameter\n", __func__); + return err; + } + } + return 0; +} diff --git a/drivers/media/dvb-frontends/stb6100_proc.h b/drivers/media/dvb-frontends/stb6100_proc.h new file mode 100644 index 00000000..112163a4 --- /dev/null +++ b/drivers/media/dvb-frontends/stb6100_proc.h @@ -0,0 +1,138 @@ +/* + STB6100 Silicon Tuner wrapper + Copyright (C)2009 Igor M. Liplianin (liplianin@me.by) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +static int stb6100_get_freq(struct dvb_frontend *fe, u32 *frequency) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state state; + int err = 0; + + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->get_state) { + if (frontend_ops->i2c_gate_ctrl) + frontend_ops->i2c_gate_ctrl(fe, 1); + + err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &state); + if (err < 0) { + printk(KERN_ERR "%s: Invalid parameter\n", __func__); + return err; + } + + if (frontend_ops->i2c_gate_ctrl) + frontend_ops->i2c_gate_ctrl(fe, 0); + + *frequency = state.frequency; + } + + return 0; +} + +static int stb6100_set_freq(struct dvb_frontend *fe, u32 frequency) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state state; + int err = 0; + + state.frequency = frequency; + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->set_state) { + if (frontend_ops->i2c_gate_ctrl) + frontend_ops->i2c_gate_ctrl(fe, 1); + + err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &state); + if (err < 0) { + printk(KERN_ERR "%s: Invalid parameter\n", __func__); + return err; + } + + if (frontend_ops->i2c_gate_ctrl) + frontend_ops->i2c_gate_ctrl(fe, 0); + + } + + return 0; +} + +static int stb6100_get_bandw(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state state; + int err = 0; + + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->get_state) { + if (frontend_ops->i2c_gate_ctrl) + frontend_ops->i2c_gate_ctrl(fe, 1); + + err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &state); + if (err < 0) { + printk(KERN_ERR "%s: Invalid parameter\n", __func__); + return err; + } + + if (frontend_ops->i2c_gate_ctrl) + frontend_ops->i2c_gate_ctrl(fe, 0); + + *bandwidth = state.bandwidth; + } + + return 0; +} + +static int stb6100_set_bandw(struct dvb_frontend *fe, u32 bandwidth) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state state; + int err = 0; + + state.bandwidth = bandwidth; + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->set_state) { + if (frontend_ops->i2c_gate_ctrl) + frontend_ops->i2c_gate_ctrl(fe, 1); + + err = tuner_ops->set_state(fe, DVBFE_TUNER_BANDWIDTH, &state); + if (err < 0) { + printk(KERN_ERR "%s: Invalid parameter\n", __func__); + return err; + } + + if (frontend_ops->i2c_gate_ctrl) + frontend_ops->i2c_gate_ctrl(fe, 0); + + } + + return 0; +} diff --git a/drivers/media/dvb-frontends/stv0288.c b/drivers/media/dvb-frontends/stv0288.c new file mode 100644 index 00000000..632b2515 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0288.c @@ -0,0 +1,626 @@ +/* + Driver for ST STV0288 demodulator + Copyright (C) 2006 Georg Acher, BayCom GmbH, acher (at) baycom (dot) de + for Reel Multimedia + Copyright (C) 2008 TurboSight.com, Bob Liu + Copyright (C) 2008 Igor M. Liplianin + Removed stb6000 specific tuner code and revised some + procedures. + 2010-09-01 Josef Pavlik + Fixed diseqc_msg, diseqc_burst and set_tone problems + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "stv0288.h" + +struct stv0288_state { + struct i2c_adapter *i2c; + const struct stv0288_config *config; + struct dvb_frontend frontend; + + u8 initialised:1; + u32 tuner_frequency; + u32 symbol_rate; + fe_code_rate_t fec_inner; + int errmode; +}; + +#define STATUS_BER 0 +#define STATUS_UCBLOCKS 1 + +static int debug; +static int debug_legacy_dish_switch; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "stv0288: " args); \ + } while (0) + + +static int stv0288_writeregI(struct stv0288_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int stv0288_write(struct dvb_frontend *fe, const u8 buf[], int len) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return stv0288_writeregI(state, buf[0], buf[1]); +} + +static u8 stv0288_readreg(struct stv0288_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static int stv0288_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct stv0288_state *state = fe->demodulator_priv; + unsigned int temp; + unsigned char b[3]; + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + stv0288_writeregI(state, 0x22, 0); + stv0288_writeregI(state, 0x23, 0); + stv0288_writeregI(state, 0x2b, 0xff); + stv0288_writeregI(state, 0x2c, 0xf7); + + temp = (unsigned int)srate / 1000; + + temp = temp * 32768; + temp = temp / 25; + temp = temp / 125; + b[0] = (unsigned char)((temp >> 12) & 0xff); + b[1] = (unsigned char)((temp >> 4) & 0xff); + b[2] = (unsigned char)((temp << 4) & 0xf0); + stv0288_writeregI(state, 0x28, 0x80); /* SFRH */ + stv0288_writeregI(state, 0x29, 0); /* SFRM */ + stv0288_writeregI(state, 0x2a, 0); /* SFRL */ + + stv0288_writeregI(state, 0x28, b[0]); + stv0288_writeregI(state, 0x29, b[1]); + stv0288_writeregI(state, 0x2a, b[2]); + dprintk("stv0288: stv0288_set_symbolrate\n"); + + return 0; +} + +static int stv0288_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct stv0288_state *state = fe->demodulator_priv; + + int i; + + dprintk("%s\n", __func__); + + stv0288_writeregI(state, 0x09, 0); + msleep(30); + stv0288_writeregI(state, 0x05, 0x12);/* modulated mode, single shot */ + + for (i = 0; i < m->msg_len; i++) { + if (stv0288_writeregI(state, 0x06, m->msg[i])) + return -EREMOTEIO; + } + msleep(m->msg_len*12); + return 0; +} + +static int stv0288_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct stv0288_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (stv0288_writeregI(state, 0x05, 0x03))/* burst mode, single shot */ + return -EREMOTEIO; + + if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff)) + return -EREMOTEIO; + + msleep(15); + if (stv0288_writeregI(state, 0x05, 0x12)) + return -EREMOTEIO; + + return 0; +} + +static int stv0288_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct stv0288_state *state = fe->demodulator_priv; + + switch (tone) { + case SEC_TONE_ON: + if (stv0288_writeregI(state, 0x05, 0x10))/* cont carrier */ + return -EREMOTEIO; + break; + + case SEC_TONE_OFF: + if (stv0288_writeregI(state, 0x05, 0x12))/* burst mode off*/ + return -EREMOTEIO; + break; + + default: + return -EINVAL; + } + return 0; +} + +static u8 stv0288_inittab[] = { + 0x01, 0x15, + 0x02, 0x20, + 0x09, 0x0, + 0x0a, 0x4, + 0x0b, 0x0, + 0x0c, 0x0, + 0x0d, 0x0, + 0x0e, 0xd4, + 0x0f, 0x30, + 0x11, 0x80, + 0x12, 0x03, + 0x13, 0x48, + 0x14, 0x84, + 0x15, 0x45, + 0x16, 0xb7, + 0x17, 0x9c, + 0x18, 0x0, + 0x19, 0xa6, + 0x1a, 0x88, + 0x1b, 0x8f, + 0x1c, 0xf0, + 0x20, 0x0b, + 0x21, 0x54, + 0x22, 0x0, + 0x23, 0x0, + 0x2b, 0xff, + 0x2c, 0xf7, + 0x30, 0x0, + 0x31, 0x1e, + 0x32, 0x14, + 0x33, 0x0f, + 0x34, 0x09, + 0x35, 0x0c, + 0x36, 0x05, + 0x37, 0x2f, + 0x38, 0x16, + 0x39, 0xbe, + 0x3a, 0x0, + 0x3b, 0x13, + 0x3c, 0x11, + 0x3d, 0x30, + 0x40, 0x63, + 0x41, 0x04, + 0x42, 0x20, + 0x43, 0x00, + 0x44, 0x00, + 0x45, 0x00, + 0x46, 0x00, + 0x47, 0x00, + 0x4a, 0x00, + 0x50, 0x10, + 0x51, 0x38, + 0x52, 0x21, + 0x58, 0x54, + 0x59, 0x86, + 0x5a, 0x0, + 0x5b, 0x9b, + 0x5c, 0x08, + 0x5d, 0x7f, + 0x5e, 0x0, + 0x5f, 0xff, + 0x70, 0x0, + 0x71, 0x0, + 0x72, 0x0, + 0x74, 0x0, + 0x75, 0x0, + 0x76, 0x0, + 0x81, 0x0, + 0x82, 0x3f, + 0x83, 0x3f, + 0x84, 0x0, + 0x85, 0x0, + 0x88, 0x0, + 0x89, 0x0, + 0x8a, 0x0, + 0x8b, 0x0, + 0x8c, 0x0, + 0x90, 0x0, + 0x91, 0x0, + 0x92, 0x0, + 0x93, 0x0, + 0x94, 0x1c, + 0x97, 0x0, + 0xa0, 0x48, + 0xa1, 0x0, + 0xb0, 0xb8, + 0xb1, 0x3a, + 0xb2, 0x10, + 0xb3, 0x82, + 0xb4, 0x80, + 0xb5, 0x82, + 0xb6, 0x82, + 0xb7, 0x82, + 0xb8, 0x20, + 0xb9, 0x0, + 0xf0, 0x0, + 0xf1, 0x0, + 0xf2, 0xc0, + 0x51, 0x36, + 0x52, 0x09, + 0x53, 0x94, + 0x54, 0x62, + 0x55, 0x29, + 0x56, 0x64, + 0x57, 0x2b, + 0xff, 0xff, +}; + +static int stv0288_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + dprintk("%s: %s\n", __func__, + volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + return 0; +} + +static int stv0288_init(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + int i; + u8 reg; + u8 val; + + dprintk("stv0288: init chip\n"); + stv0288_writeregI(state, 0x41, 0x04); + msleep(50); + + /* we have default inittab */ + if (state->config->inittab == NULL) { + for (i = 0; !(stv0288_inittab[i] == 0xff && + stv0288_inittab[i + 1] == 0xff); i += 2) + stv0288_writeregI(state, stv0288_inittab[i], + stv0288_inittab[i + 1]); + } else { + for (i = 0; ; i += 2) { + reg = state->config->inittab[i]; + val = state->config->inittab[i+1]; + if (reg == 0xff && val == 0xff) + break; + stv0288_writeregI(state, reg, val); + } + } + return 0; +} + +static int stv0288_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct stv0288_state *state = fe->demodulator_priv; + + u8 sync = stv0288_readreg(state, 0x24); + if (sync == 255) + sync = 0; + + dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, sync); + + *status = 0; + if (sync & 0x80) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + if (sync & 0x10) + *status |= FE_HAS_VITERBI; + if (sync & 0x08) { + *status |= FE_HAS_LOCK; + dprintk("stv0288 has locked\n"); + } + + return 0; +} + +static int stv0288_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (state->errmode != STATUS_BER) + return 0; + *ber = (stv0288_readreg(state, 0x26) << 8) | + stv0288_readreg(state, 0x27); + dprintk("stv0288_read_ber %d\n", *ber); + + return 0; +} + + +static int stv0288_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct stv0288_state *state = fe->demodulator_priv; + + s32 signal = 0xffff - ((stv0288_readreg(state, 0x10) << 8)); + + + signal = signal * 5 / 4; + *strength = (signal > 0xffff) ? 0xffff : (signal < 0) ? 0 : signal; + dprintk("stv0288_read_signal_strength %d\n", *strength); + + return 0; +} +static int stv0288_sleep(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + + stv0288_writeregI(state, 0x41, 0x84); + state->initialised = 0; + + return 0; +} +static int stv0288_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct stv0288_state *state = fe->demodulator_priv; + + s32 xsnr = 0xffff - ((stv0288_readreg(state, 0x2d) << 8) + | stv0288_readreg(state, 0x2e)); + xsnr = 3 * (xsnr - 0xa100); + *snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr; + dprintk("stv0288_read_snr %d\n", *snr); + + return 0; +} + +static int stv0288_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (state->errmode != STATUS_BER) + return 0; + *ucblocks = (stv0288_readreg(state, 0x26) << 8) | + stv0288_readreg(state, 0x27); + dprintk("stv0288_read_ber %d\n", *ucblocks); + + return 0; +} + +static int stv0288_set_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int stv0288_set_frontend(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + char tm; + unsigned char tda[3]; + u8 reg, time_out = 0; + + dprintk("%s : FE_SET_FRONTEND\n", __func__); + + if (c->delivery_system != SYS_DVBS) { + dprintk("%s: unsupported delivery " + "system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + /* only frequency & symbol_rate are used for tuner*/ + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + udelay(10); + stv0288_set_symbolrate(fe, c->symbol_rate); + /* Carrier lock control register */ + stv0288_writeregI(state, 0x15, 0xc5); + + tda[2] = 0x0; /* CFRL */ + for (tm = -9; tm < 7;) { + /* Viterbi status */ + reg = stv0288_readreg(state, 0x24); + if (reg & 0x8) + break; + if (reg & 0x80) { + time_out++; + if (time_out > 10) + break; + tda[2] += 40; + if (tda[2] < 40) + tm++; + } else { + tm++; + tda[2] = 0; + time_out = 0; + } + tda[1] = (unsigned char)tm; + stv0288_writeregI(state, 0x2b, tda[1]); + stv0288_writeregI(state, 0x2c, tda[2]); + msleep(30); + } + state->tuner_frequency = c->frequency; + state->fec_inner = FEC_AUTO; + state->symbol_rate = c->symbol_rate; + + return 0; +} + +static int stv0288_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (enable) + stv0288_writeregI(state, 0x01, 0xb5); + else + stv0288_writeregI(state, 0x01, 0x35); + + udelay(1); + + return 0; +} + +static void stv0288_release(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops stv0288_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "ST STV0288 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, /* kHz for QPSK frontends */ + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = stv0288_release, + .init = stv0288_init, + .sleep = stv0288_sleep, + .write = stv0288_write, + .i2c_gate_ctrl = stv0288_i2c_gate_ctrl, + .read_status = stv0288_read_status, + .read_ber = stv0288_read_ber, + .read_signal_strength = stv0288_read_signal_strength, + .read_snr = stv0288_read_snr, + .read_ucblocks = stv0288_read_ucblocks, + .diseqc_send_master_cmd = stv0288_send_diseqc_msg, + .diseqc_send_burst = stv0288_send_diseqc_burst, + .set_tone = stv0288_set_tone, + .set_voltage = stv0288_set_voltage, + + .set_property = stv0288_set_property, + .set_frontend = stv0288_set_frontend, +}; + +struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c) +{ + struct stv0288_state *state = NULL; + int id; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct stv0288_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + state->tuner_frequency = 0; + state->symbol_rate = 0; + state->fec_inner = 0; + state->errmode = STATUS_BER; + + stv0288_writeregI(state, 0x41, 0x04); + msleep(200); + id = stv0288_readreg(state, 0x00); + dprintk("stv0288 id %x\n", id); + + /* register 0x00 contains 0x11 for STV0288 */ + if (id != 0x11) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &stv0288_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + + return NULL; +} +EXPORT_SYMBOL(stv0288_attach); + +module_param(debug_legacy_dish_switch, int, 0444); +MODULE_PARM_DESC(debug_legacy_dish_switch, + "Enable timing analysis for Dish Network legacy switches"); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("ST STV0288 DVB Demodulator driver"); +MODULE_AUTHOR("Georg Acher, Bob Liu, Igor liplianin"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/media/dvb-frontends/stv0288.h b/drivers/media/dvb-frontends/stv0288.h new file mode 100644 index 00000000..a0bd9310 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0288.h @@ -0,0 +1,67 @@ +/* + Driver for ST STV0288 demodulator + + Copyright (C) 2006 Georg Acher, BayCom GmbH, acher (at) baycom (dot) de + for Reel Multimedia + Copyright (C) 2008 TurboSight.com, + Copyright (C) 2008 Igor M. Liplianin + Removed stb6000 specific tuner code and revised some + procedures. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef STV0288_H +#define STV0288_H + +#include +#include +#include "dvb_frontend.h" + +struct stv0288_config { + /* the demodulator's i2c address */ + u8 demod_address; + + u8* inittab; + + /* minimum delay before retuning */ + int min_delay_ms; + + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); +}; + +#if IS_ENABLED(CONFIG_DVB_STV0288) +extern struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_STV0288 */ + +static inline int stv0288_writereg(struct dvb_frontend *fe, u8 reg, u8 val) +{ + int r = 0; + u8 buf[] = { reg, val }; + if (fe->ops.write) + r = fe->ops.write(fe, buf, 2); + return r; +} + +#endif /* STV0288_H */ diff --git a/drivers/media/dvb-frontends/stv0297.c b/drivers/media/dvb-frontends/stv0297.c new file mode 100644 index 00000000..d40f2261 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0297.c @@ -0,0 +1,722 @@ +/* + Driver for STV0297 demodulator + + Copyright (C) 2004 Andrew de Quincey + Copyright (C) 2003-2004 Dennis Noermann + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "stv0297.h" + +struct stv0297_state { + struct i2c_adapter *i2c; + const struct stv0297_config *config; + struct dvb_frontend frontend; + + unsigned long last_ber; + unsigned long base_freq; +}; + +#if 1 +#define dprintk(x...) printk(x) +#else +#define dprintk(x...) +#endif + +#define STV0297_CLOCK_KHZ 28900 + + +static int stv0297_writereg(struct stv0297_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 2 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static int stv0297_readreg(struct stv0297_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 1}, + {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1} + }; + + // this device needs a STOP between the register and data + if (state->config->stop_during_read) { + if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret); + return -1; + } + if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret); + return -1; + } + } else { + if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret); + return -1; + } + } + + return b1[0]; +} + +static int stv0297_writereg_mask(struct stv0297_state *state, u8 reg, u8 mask, u8 data) +{ + int val; + + val = stv0297_readreg(state, reg); + val &= ~mask; + val |= (data & mask); + stv0297_writereg(state, reg, val); + + return 0; +} + +static int stv0297_readregs(struct stv0297_state *state, u8 reg1, u8 * b, u8 len) +{ + int ret; + struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = + ®1,.len = 1}, + {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b,.len = len} + }; + + // this device needs a STOP between the register and data + if (state->config->stop_during_read) { + if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret); + return -1; + } + if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret); + return -1; + } + } else { + if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret); + return -1; + } + } + + return 0; +} + +static u32 stv0297_get_symbolrate(struct stv0297_state *state) +{ + u64 tmp; + + tmp = stv0297_readreg(state, 0x55); + tmp |= stv0297_readreg(state, 0x56) << 8; + tmp |= stv0297_readreg(state, 0x57) << 16; + tmp |= stv0297_readreg(state, 0x58) << 24; + + tmp *= STV0297_CLOCK_KHZ; + tmp >>= 32; + + return (u32) tmp; +} + +static void stv0297_set_symbolrate(struct stv0297_state *state, u32 srate) +{ + long tmp; + + tmp = 131072L * srate; /* 131072 = 2^17 */ + tmp = tmp / (STV0297_CLOCK_KHZ / 4); /* 1/4 = 2^-2 */ + tmp = tmp * 8192L; /* 8192 = 2^13 */ + + stv0297_writereg(state, 0x55, (unsigned char) (tmp & 0xFF)); + stv0297_writereg(state, 0x56, (unsigned char) (tmp >> 8)); + stv0297_writereg(state, 0x57, (unsigned char) (tmp >> 16)); + stv0297_writereg(state, 0x58, (unsigned char) (tmp >> 24)); +} + +static void stv0297_set_sweeprate(struct stv0297_state *state, short fshift, long symrate) +{ + long tmp; + + tmp = (long) fshift *262144L; /* 262144 = 2*18 */ + tmp /= symrate; + tmp *= 1024; /* 1024 = 2*10 */ + + // adjust + if (tmp >= 0) { + tmp += 500000; + } else { + tmp -= 500000; + } + tmp /= 1000000; + + stv0297_writereg(state, 0x60, tmp & 0xFF); + stv0297_writereg_mask(state, 0x69, 0xF0, (tmp >> 4) & 0xf0); +} + +static void stv0297_set_carrieroffset(struct stv0297_state *state, long offset) +{ + long tmp; + + /* symrate is hardcoded to 10000 */ + tmp = offset * 26844L; /* (2**28)/10000 */ + if (tmp < 0) + tmp += 0x10000000; + tmp &= 0x0FFFFFFF; + + stv0297_writereg(state, 0x66, (unsigned char) (tmp & 0xFF)); + stv0297_writereg(state, 0x67, (unsigned char) (tmp >> 8)); + stv0297_writereg(state, 0x68, (unsigned char) (tmp >> 16)); + stv0297_writereg_mask(state, 0x69, 0x0F, (tmp >> 24) & 0x0f); +} + +/* +static long stv0297_get_carrieroffset(struct stv0297_state *state) +{ + s64 tmp; + + stv0297_writereg(state, 0x6B, 0x00); + + tmp = stv0297_readreg(state, 0x66); + tmp |= (stv0297_readreg(state, 0x67) << 8); + tmp |= (stv0297_readreg(state, 0x68) << 16); + tmp |= (stv0297_readreg(state, 0x69) & 0x0F) << 24; + + tmp *= stv0297_get_symbolrate(state); + tmp >>= 28; + + return (s32) tmp; +} +*/ + +static void stv0297_set_initialdemodfreq(struct stv0297_state *state, long freq) +{ + s32 tmp; + + if (freq > 10000) + freq -= STV0297_CLOCK_KHZ; + + tmp = (STV0297_CLOCK_KHZ * 1000) / (1 << 16); + tmp = (freq * 1000) / tmp; + if (tmp > 0xffff) + tmp = 0xffff; + + stv0297_writereg_mask(state, 0x25, 0x80, 0x80); + stv0297_writereg(state, 0x21, tmp >> 8); + stv0297_writereg(state, 0x20, tmp); +} + +static int stv0297_set_qam(struct stv0297_state *state, fe_modulation_t modulation) +{ + int val = 0; + + switch (modulation) { + case QAM_16: + val = 0; + break; + + case QAM_32: + val = 1; + break; + + case QAM_64: + val = 4; + break; + + case QAM_128: + val = 2; + break; + + case QAM_256: + val = 3; + break; + + default: + return -EINVAL; + } + + stv0297_writereg_mask(state, 0x00, 0x70, val << 4); + + return 0; +} + +static int stv0297_set_inversion(struct stv0297_state *state, fe_spectral_inversion_t inversion) +{ + int val = 0; + + switch (inversion) { + case INVERSION_OFF: + val = 0; + break; + + case INVERSION_ON: + val = 1; + break; + + default: + return -EINVAL; + } + + stv0297_writereg_mask(state, 0x83, 0x08, val << 3); + + return 0; +} + +static int stv0297_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct stv0297_state *state = fe->demodulator_priv; + + if (enable) { + stv0297_writereg(state, 0x87, 0x78); + stv0297_writereg(state, 0x86, 0xc8); + } + + return 0; +} + +static int stv0297_init(struct dvb_frontend *fe) +{ + struct stv0297_state *state = fe->demodulator_priv; + int i; + + /* load init table */ + for (i=0; !(state->config->inittab[i] == 0xff && state->config->inittab[i+1] == 0xff); i+=2) + stv0297_writereg(state, state->config->inittab[i], state->config->inittab[i+1]); + msleep(200); + + state->last_ber = 0; + + return 0; +} + +static int stv0297_sleep(struct dvb_frontend *fe) +{ + struct stv0297_state *state = fe->demodulator_priv; + + stv0297_writereg_mask(state, 0x80, 1, 1); + + return 0; +} + +static int stv0297_read_status(struct dvb_frontend *fe, fe_status_t * status) +{ + struct stv0297_state *state = fe->demodulator_priv; + + u8 sync = stv0297_readreg(state, 0xDF); + + *status = 0; + if (sync & 0x80) + *status |= + FE_HAS_SYNC | FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_LOCK; + return 0; +} + +static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber) +{ + struct stv0297_state *state = fe->demodulator_priv; + u8 BER[3]; + + stv0297_readregs(state, 0xA0, BER, 3); + if (!(BER[0] & 0x80)) { + state->last_ber = BER[2] << 8 | BER[1]; + stv0297_writereg_mask(state, 0xA0, 0x80, 0x80); + } + + *ber = state->last_ber; + + return 0; +} + + +static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +{ + struct stv0297_state *state = fe->demodulator_priv; + u8 STRENGTH[3]; + u16 tmp; + + stv0297_readregs(state, 0x41, STRENGTH, 3); + tmp = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0]; + if (STRENGTH[2] & 0x20) { + if (tmp < 0x200) + tmp = 0; + else + tmp = tmp - 0x200; + } else { + if (tmp > 0x1ff) + tmp = 0; + else + tmp = 0x1ff - tmp; + } + *strength = (tmp << 7) | (tmp >> 2); + return 0; +} + +static int stv0297_read_snr(struct dvb_frontend *fe, u16 * snr) +{ + struct stv0297_state *state = fe->demodulator_priv; + u8 SNR[2]; + + stv0297_readregs(state, 0x07, SNR, 2); + *snr = SNR[1] << 8 | SNR[0]; + + return 0; +} + +static int stv0297_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) +{ + struct stv0297_state *state = fe->demodulator_priv; + + stv0297_writereg_mask(state, 0xDF, 0x03, 0x03); /* freeze the counters */ + + *ucblocks = (stv0297_readreg(state, 0xD5) << 8) + | stv0297_readreg(state, 0xD4); + + stv0297_writereg_mask(state, 0xDF, 0x03, 0x02); /* clear the counters */ + stv0297_writereg_mask(state, 0xDF, 0x03, 0x01); /* re-enable the counters */ + + return 0; +} + +static int stv0297_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0297_state *state = fe->demodulator_priv; + int u_threshold; + int initial_u; + int blind_u; + int delay; + int sweeprate; + int carrieroffset; + unsigned long timeout; + fe_spectral_inversion_t inversion; + + switch (p->modulation) { + case QAM_16: + case QAM_32: + case QAM_64: + delay = 100; + sweeprate = 1000; + break; + + case QAM_128: + case QAM_256: + delay = 200; + sweeprate = 500; + break; + + default: + return -EINVAL; + } + + // determine inversion dependent parameters + inversion = p->inversion; + if (state->config->invert) + inversion = (inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON; + carrieroffset = -330; + switch (inversion) { + case INVERSION_OFF: + break; + + case INVERSION_ON: + sweeprate = -sweeprate; + carrieroffset = -carrieroffset; + break; + + default: + return -EINVAL; + } + + stv0297_init(fe); + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* clear software interrupts */ + stv0297_writereg(state, 0x82, 0x0); + + /* set initial demodulation frequency */ + stv0297_set_initialdemodfreq(state, 7250); + + /* setup AGC */ + stv0297_writereg_mask(state, 0x43, 0x10, 0x00); + stv0297_writereg(state, 0x41, 0x00); + stv0297_writereg_mask(state, 0x42, 0x03, 0x01); + stv0297_writereg_mask(state, 0x36, 0x60, 0x00); + stv0297_writereg_mask(state, 0x36, 0x18, 0x00); + stv0297_writereg_mask(state, 0x71, 0x80, 0x80); + stv0297_writereg(state, 0x72, 0x00); + stv0297_writereg(state, 0x73, 0x00); + stv0297_writereg_mask(state, 0x74, 0x0F, 0x00); + stv0297_writereg_mask(state, 0x43, 0x08, 0x00); + stv0297_writereg_mask(state, 0x71, 0x80, 0x00); + + /* setup STL */ + stv0297_writereg_mask(state, 0x5a, 0x20, 0x20); + stv0297_writereg_mask(state, 0x5b, 0x02, 0x02); + stv0297_writereg_mask(state, 0x5b, 0x02, 0x00); + stv0297_writereg_mask(state, 0x5b, 0x01, 0x00); + stv0297_writereg_mask(state, 0x5a, 0x40, 0x40); + + /* disable frequency sweep */ + stv0297_writereg_mask(state, 0x6a, 0x01, 0x00); + + /* reset deinterleaver */ + stv0297_writereg_mask(state, 0x81, 0x01, 0x01); + stv0297_writereg_mask(state, 0x81, 0x01, 0x00); + + /* ??? */ + stv0297_writereg_mask(state, 0x83, 0x20, 0x20); + stv0297_writereg_mask(state, 0x83, 0x20, 0x00); + + /* reset equaliser */ + u_threshold = stv0297_readreg(state, 0x00) & 0xf; + initial_u = stv0297_readreg(state, 0x01) >> 4; + blind_u = stv0297_readreg(state, 0x01) & 0xf; + stv0297_writereg_mask(state, 0x84, 0x01, 0x01); + stv0297_writereg_mask(state, 0x84, 0x01, 0x00); + stv0297_writereg_mask(state, 0x00, 0x0f, u_threshold); + stv0297_writereg_mask(state, 0x01, 0xf0, initial_u << 4); + stv0297_writereg_mask(state, 0x01, 0x0f, blind_u); + + /* data comes from internal A/D */ + stv0297_writereg_mask(state, 0x87, 0x80, 0x00); + + /* clear phase registers */ + stv0297_writereg(state, 0x63, 0x00); + stv0297_writereg(state, 0x64, 0x00); + stv0297_writereg(state, 0x65, 0x00); + stv0297_writereg(state, 0x66, 0x00); + stv0297_writereg(state, 0x67, 0x00); + stv0297_writereg(state, 0x68, 0x00); + stv0297_writereg_mask(state, 0x69, 0x0f, 0x00); + + /* set parameters */ + stv0297_set_qam(state, p->modulation); + stv0297_set_symbolrate(state, p->symbol_rate / 1000); + stv0297_set_sweeprate(state, sweeprate, p->symbol_rate / 1000); + stv0297_set_carrieroffset(state, carrieroffset); + stv0297_set_inversion(state, inversion); + + /* kick off lock */ + /* Disable corner detection for higher QAMs */ + if (p->modulation == QAM_128 || + p->modulation == QAM_256) + stv0297_writereg_mask(state, 0x88, 0x08, 0x00); + else + stv0297_writereg_mask(state, 0x88, 0x08, 0x08); + + stv0297_writereg_mask(state, 0x5a, 0x20, 0x00); + stv0297_writereg_mask(state, 0x6a, 0x01, 0x01); + stv0297_writereg_mask(state, 0x43, 0x40, 0x40); + stv0297_writereg_mask(state, 0x5b, 0x30, 0x00); + stv0297_writereg_mask(state, 0x03, 0x0c, 0x0c); + stv0297_writereg_mask(state, 0x03, 0x03, 0x03); + stv0297_writereg_mask(state, 0x43, 0x10, 0x10); + + /* wait for WGAGC lock */ + timeout = jiffies + msecs_to_jiffies(2000); + while (time_before(jiffies, timeout)) { + msleep(10); + if (stv0297_readreg(state, 0x43) & 0x08) + break; + } + if (time_after(jiffies, timeout)) { + goto timeout; + } + msleep(20); + + /* wait for equaliser partial convergence */ + timeout = jiffies + msecs_to_jiffies(500); + while (time_before(jiffies, timeout)) { + msleep(10); + + if (stv0297_readreg(state, 0x82) & 0x04) { + break; + } + } + if (time_after(jiffies, timeout)) { + goto timeout; + } + + /* wait for equaliser full convergence */ + timeout = jiffies + msecs_to_jiffies(delay); + while (time_before(jiffies, timeout)) { + msleep(10); + + if (stv0297_readreg(state, 0x82) & 0x08) { + break; + } + } + if (time_after(jiffies, timeout)) { + goto timeout; + } + + /* disable sweep */ + stv0297_writereg_mask(state, 0x6a, 1, 0); + stv0297_writereg_mask(state, 0x88, 8, 0); + + /* wait for main lock */ + timeout = jiffies + msecs_to_jiffies(20); + while (time_before(jiffies, timeout)) { + msleep(10); + + if (stv0297_readreg(state, 0xDF) & 0x80) { + break; + } + } + if (time_after(jiffies, timeout)) { + goto timeout; + } + msleep(100); + + /* is it still locked after that delay? */ + if (!(stv0297_readreg(state, 0xDF) & 0x80)) { + goto timeout; + } + + /* success!! */ + stv0297_writereg_mask(state, 0x5a, 0x40, 0x00); + state->base_freq = p->frequency; + return 0; + +timeout: + stv0297_writereg_mask(state, 0x6a, 0x01, 0x00); + return 0; +} + +static int stv0297_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0297_state *state = fe->demodulator_priv; + int reg_00, reg_83; + + reg_00 = stv0297_readreg(state, 0x00); + reg_83 = stv0297_readreg(state, 0x83); + + p->frequency = state->base_freq; + p->inversion = (reg_83 & 0x08) ? INVERSION_ON : INVERSION_OFF; + if (state->config->invert) + p->inversion = (p->inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON; + p->symbol_rate = stv0297_get_symbolrate(state) * 1000; + p->fec_inner = FEC_NONE; + + switch ((reg_00 >> 4) & 0x7) { + case 0: + p->modulation = QAM_16; + break; + case 1: + p->modulation = QAM_32; + break; + case 2: + p->modulation = QAM_128; + break; + case 3: + p->modulation = QAM_256; + break; + case 4: + p->modulation = QAM_64; + break; + } + + return 0; +} + +static void stv0297_release(struct dvb_frontend *fe) +{ + struct stv0297_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops stv0297_ops; + +struct dvb_frontend *stv0297_attach(const struct stv0297_config *config, + struct i2c_adapter *i2c) +{ + struct stv0297_state *state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct stv0297_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->last_ber = 0; + state->base_freq = 0; + + /* check if the demod is there */ + if ((stv0297_readreg(state, 0x80) & 0x70) != 0x20) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &stv0297_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops stv0297_ops = { + .delsys = { SYS_DVBC_ANNEX_A }, + .info = { + .name = "ST STV0297 DVB-C", + .frequency_min = 47000000, + .frequency_max = 862000000, + .frequency_stepsize = 62500, + .symbol_rate_min = 870000, + .symbol_rate_max = 11700000, + .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO}, + + .release = stv0297_release, + + .init = stv0297_init, + .sleep = stv0297_sleep, + .i2c_gate_ctrl = stv0297_i2c_gate_ctrl, + + .set_frontend = stv0297_set_frontend, + .get_frontend = stv0297_get_frontend, + + .read_status = stv0297_read_status, + .read_ber = stv0297_read_ber, + .read_signal_strength = stv0297_read_signal_strength, + .read_snr = stv0297_read_snr, + .read_ucblocks = stv0297_read_ucblocks, +}; + +MODULE_DESCRIPTION("ST STV0297 DVB-C Demodulator driver"); +MODULE_AUTHOR("Dennis Noermann and Andrew de Quincey"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(stv0297_attach); diff --git a/drivers/media/dvb-frontends/stv0297.h b/drivers/media/dvb-frontends/stv0297.h new file mode 100644 index 00000000..c8ff3639 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0297.h @@ -0,0 +1,57 @@ +/* + Driver for STV0297 demodulator + + Copyright (C) 2003-2004 Dennis Noermann + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef STV0297_H +#define STV0297_H + +#include +#include "dvb_frontend.h" + +struct stv0297_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* inittab - array of pairs of values. + * First of each pair is the register, second is the value. + * List should be terminated with an 0xff, 0xff pair. + */ + u8* inittab; + + /* does the "inversion" need inverted? */ + u8 invert:1; + + /* set to 1 if the device requires an i2c STOP during reading */ + u8 stop_during_read:1; +}; + +#if IS_ENABLED(CONFIG_DVB_STV0297) +extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* stv0297_attach(const struct stv0297_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_STV0297 + +#endif // STV0297_H diff --git a/drivers/media/dvb-frontends/stv0299.c b/drivers/media/dvb-frontends/stv0299.c new file mode 100644 index 00000000..b57ecf42 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0299.c @@ -0,0 +1,762 @@ +/* + Driver for ST STV0299 demodulator + + Copyright (C) 2001-2002 Convergence Integrated Media GmbH + , + , + + + + Philips SU1278/SH + + Copyright (C) 2002 by Peter Schildmann + + + LG TDQF-S001F + + Copyright (C) 2002 Felix Domke + & Andreas Oberritter + + + Support for Samsung TBMU24112IMB used on Technisat SkyStar2 rev. 2.6B + + Copyright (C) 2003 Vadim Catana : + + Support for Philips SU1278 on Technotrend hardware + + Copyright (C) 2004 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "stv0299.h" + +struct stv0299_state { + struct i2c_adapter* i2c; + const struct stv0299_config* config; + struct dvb_frontend frontend; + + u8 initialised:1; + u32 tuner_frequency; + u32 symbol_rate; + fe_code_rate_t fec_inner; + int errmode; + u32 ucblocks; + u8 mcr_reg; +}; + +#define STATUS_BER 0 +#define STATUS_UCBLOCKS 1 + +static int debug; +static int debug_legacy_dish_switch; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "stv0299: " args); \ + } while (0) + + +static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data) +{ + int ret; + u8 buf [] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + + ret = i2c_transfer (state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int stv0299_write(struct dvb_frontend* fe, const u8 buf[], int len) +{ + struct stv0299_state* state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return stv0299_writeregI(state, buf[0], buf[1]); +} + +static u8 stv0299_readreg (struct stv0299_state* state, u8 reg) +{ + int ret; + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + ret = i2c_transfer (state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static int stv0299_readregs (struct stv0299_state* state, u8 reg1, u8 *b, u8 len) +{ + int ret; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = ®1, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = len } }; + + ret = i2c_transfer (state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (ret == %i)\n", __func__, ret); + + return ret == 2 ? 0 : ret; +} + +static int stv0299_set_FEC (struct stv0299_state* state, fe_code_rate_t fec) +{ + dprintk ("%s\n", __func__); + + switch (fec) { + case FEC_AUTO: + { + return stv0299_writeregI (state, 0x31, 0x1f); + } + case FEC_1_2: + { + return stv0299_writeregI (state, 0x31, 0x01); + } + case FEC_2_3: + { + return stv0299_writeregI (state, 0x31, 0x02); + } + case FEC_3_4: + { + return stv0299_writeregI (state, 0x31, 0x04); + } + case FEC_5_6: + { + return stv0299_writeregI (state, 0x31, 0x08); + } + case FEC_7_8: + { + return stv0299_writeregI (state, 0x31, 0x10); + } + default: + { + return -EINVAL; + } + } +} + +static fe_code_rate_t stv0299_get_fec (struct stv0299_state* state) +{ + static fe_code_rate_t fec_tab [] = { FEC_2_3, FEC_3_4, FEC_5_6, + FEC_7_8, FEC_1_2 }; + u8 index; + + dprintk ("%s\n", __func__); + + index = stv0299_readreg (state, 0x1b); + index &= 0x7; + + if (index > 4) + return FEC_AUTO; + + return fec_tab [index]; +} + +static int stv0299_wait_diseqc_fifo (struct stv0299_state* state, int timeout) +{ + unsigned long start = jiffies; + + dprintk ("%s\n", __func__); + + while (stv0299_readreg(state, 0x0a) & 1) { + if (jiffies - start > timeout) { + dprintk ("%s: timeout!!\n", __func__); + return -ETIMEDOUT; + } + msleep(10); + } + + return 0; +} + +static int stv0299_wait_diseqc_idle (struct stv0299_state* state, int timeout) +{ + unsigned long start = jiffies; + + dprintk ("%s\n", __func__); + + while ((stv0299_readreg(state, 0x0a) & 3) != 2 ) { + if (jiffies - start > timeout) { + dprintk ("%s: timeout!!\n", __func__); + return -ETIMEDOUT; + } + msleep(10); + } + + return 0; +} + +static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate) +{ + struct stv0299_state* state = fe->demodulator_priv; + u64 big = srate; + u32 ratio; + + // check rate is within limits + if ((srate < 1000000) || (srate > 45000000)) return -EINVAL; + + // calculate value to program + big = big << 20; + big += (state->config->mclk-1); // round correctly + do_div(big, state->config->mclk); + ratio = big << 4; + + return state->config->set_symbol_rate(fe, srate, ratio); +} + +static int stv0299_get_symbolrate (struct stv0299_state* state) +{ + u32 Mclk = state->config->mclk / 4096L; + u32 srate; + s32 offset; + u8 sfr[3]; + s8 rtf; + + dprintk ("%s\n", __func__); + + stv0299_readregs (state, 0x1f, sfr, 3); + stv0299_readregs (state, 0x1a, (u8 *)&rtf, 1); + + srate = (sfr[0] << 8) | sfr[1]; + srate *= Mclk; + srate /= 16; + srate += (sfr[2] >> 4) * Mclk / 256; + offset = (s32) rtf * (srate / 4096L); + offset /= 128; + + dprintk ("%s : srate = %i\n", __func__, srate); + dprintk ("%s : ofset = %i\n", __func__, offset); + + srate += offset; + + srate += 1000; + srate /= 2000; + srate *= 2000; + + return srate; +} + +static int stv0299_send_diseqc_msg (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd *m) +{ + struct stv0299_state* state = fe->demodulator_priv; + u8 val; + int i; + + dprintk ("%s\n", __func__); + + if (stv0299_wait_diseqc_idle (state, 100) < 0) + return -ETIMEDOUT; + + val = stv0299_readreg (state, 0x08); + + if (stv0299_writeregI (state, 0x08, (val & ~0x7) | 0x6)) /* DiSEqC mode */ + return -EREMOTEIO; + + for (i=0; imsg_len; i++) { + if (stv0299_wait_diseqc_fifo (state, 100) < 0) + return -ETIMEDOUT; + + if (stv0299_writeregI (state, 0x09, m->msg[i])) + return -EREMOTEIO; + } + + if (stv0299_wait_diseqc_idle (state, 100) < 0) + return -ETIMEDOUT; + + return 0; +} + +static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +{ + struct stv0299_state* state = fe->demodulator_priv; + u8 val; + + dprintk ("%s\n", __func__); + + if (stv0299_wait_diseqc_idle (state, 100) < 0) + return -ETIMEDOUT; + + val = stv0299_readreg (state, 0x08); + + if (stv0299_writeregI (state, 0x08, (val & ~0x7) | 0x2)) /* burst mode */ + return -EREMOTEIO; + + if (stv0299_writeregI (state, 0x09, burst == SEC_MINI_A ? 0x00 : 0xff)) + return -EREMOTEIO; + + if (stv0299_wait_diseqc_idle (state, 100) < 0) + return -ETIMEDOUT; + + if (stv0299_writeregI (state, 0x08, val)) + return -EREMOTEIO; + + return 0; +} + +static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct stv0299_state* state = fe->demodulator_priv; + u8 val; + + if (stv0299_wait_diseqc_idle (state, 100) < 0) + return -ETIMEDOUT; + + val = stv0299_readreg (state, 0x08); + + switch (tone) { + case SEC_TONE_ON: + return stv0299_writeregI (state, 0x08, val | 0x3); + + case SEC_TONE_OFF: + return stv0299_writeregI (state, 0x08, (val & ~0x3) | 0x02); + + default: + return -EINVAL; + } +} + +static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct stv0299_state* state = fe->demodulator_priv; + u8 reg0x08; + u8 reg0x0c; + + dprintk("%s: %s\n", __func__, + voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + reg0x08 = stv0299_readreg (state, 0x08); + reg0x0c = stv0299_readreg (state, 0x0c); + + /** + * H/V switching over OP0, OP1 and OP2 are LNB power enable bits + */ + reg0x0c &= 0x0f; + reg0x08 = (reg0x08 & 0x3f) | (state->config->lock_output << 6); + + switch (voltage) { + case SEC_VOLTAGE_13: + if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0) + reg0x0c |= 0x10; /* OP1 off, OP0 on */ + else + reg0x0c |= 0x40; /* OP1 on, OP0 off */ + break; + case SEC_VOLTAGE_18: + reg0x0c |= 0x50; /* OP1 on, OP0 on */ + break; + case SEC_VOLTAGE_OFF: + /* LNB power off! */ + reg0x08 = 0x00; + reg0x0c = 0x00; + break; + default: + return -EINVAL; + } + + if (state->config->op0_off) + reg0x0c &= ~0x10; + + stv0299_writeregI(state, 0x08, reg0x08); + return stv0299_writeregI(state, 0x0c, reg0x0c); +} + +static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long cmd) +{ + struct stv0299_state* state = fe->demodulator_priv; + u8 reg0x08; + u8 reg0x0c; + u8 lv_mask = 0x40; + u8 last = 1; + int i; + struct timeval nexttime; + struct timeval tv[10]; + + reg0x08 = stv0299_readreg (state, 0x08); + reg0x0c = stv0299_readreg (state, 0x0c); + reg0x0c &= 0x0f; + stv0299_writeregI (state, 0x08, (reg0x08 & 0x3f) | (state->config->lock_output << 6)); + if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0) + lv_mask = 0x10; + + cmd = cmd << 1; + if (debug_legacy_dish_switch) + printk ("%s switch command: 0x%04lx\n",__func__, cmd); + + do_gettimeofday (&nexttime); + if (debug_legacy_dish_switch) + tv[0] = nexttime; + stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */ + + dvb_frontend_sleep_until(&nexttime, 32000); + + for (i=0; i<9; i++) { + if (debug_legacy_dish_switch) + do_gettimeofday (&tv[i+1]); + if((cmd & 0x01) != last) { + /* set voltage to (last ? 13V : 18V) */ + stv0299_writeregI (state, 0x0c, reg0x0c | (last ? lv_mask : 0x50)); + last = (last) ? 0 : 1; + } + + cmd = cmd >> 1; + + if (i != 8) + dvb_frontend_sleep_until(&nexttime, 8000); + } + if (debug_legacy_dish_switch) { + printk ("%s(%d): switch delay (should be 32k followed by all 8k\n", + __func__, fe->dvb->num); + for (i = 1; i < 10; i++) + printk ("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); + } + + return 0; +} + +static int stv0299_init (struct dvb_frontend* fe) +{ + struct stv0299_state* state = fe->demodulator_priv; + int i; + u8 reg; + u8 val; + + dprintk("stv0299: init chip\n"); + + stv0299_writeregI(state, 0x02, 0x30 | state->mcr_reg); + msleep(50); + + for (i = 0; ; i += 2) { + reg = state->config->inittab[i]; + val = state->config->inittab[i+1]; + if (reg == 0xff && val == 0xff) + break; + if (reg == 0x0c && state->config->op0_off) + val &= ~0x10; + if (reg == 0x2) + state->mcr_reg = val & 0xf; + stv0299_writeregI(state, reg, val); + } + + return 0; +} + +static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct stv0299_state* state = fe->demodulator_priv; + + u8 signal = 0xff - stv0299_readreg (state, 0x18); + u8 sync = stv0299_readreg (state, 0x1b); + + dprintk ("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, sync); + *status = 0; + + if (signal > 10) + *status |= FE_HAS_SIGNAL; + + if (sync & 0x80) + *status |= FE_HAS_CARRIER; + + if (sync & 0x10) + *status |= FE_HAS_VITERBI; + + if (sync & 0x08) + *status |= FE_HAS_SYNC; + + if ((sync & 0x98) == 0x98) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct stv0299_state* state = fe->demodulator_priv; + + if (state->errmode != STATUS_BER) + return -ENOSYS; + + *ber = stv0299_readreg(state, 0x1e) | (stv0299_readreg(state, 0x1d) << 8); + + return 0; +} + +static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct stv0299_state* state = fe->demodulator_priv; + + s32 signal = 0xffff - ((stv0299_readreg (state, 0x18) << 8) + | stv0299_readreg (state, 0x19)); + + dprintk ("%s : FE_READ_SIGNAL_STRENGTH : AGC2I: 0x%02x%02x, signal=0x%04x\n", __func__, + stv0299_readreg (state, 0x18), + stv0299_readreg (state, 0x19), (int) signal); + + signal = signal * 5 / 4; + *strength = (signal > 0xffff) ? 0xffff : (signal < 0) ? 0 : signal; + + return 0; +} + +static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct stv0299_state* state = fe->demodulator_priv; + + s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8) + | stv0299_readreg (state, 0x25)); + xsnr = 3 * (xsnr - 0xa100); + *snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr; + + return 0; +} + +static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct stv0299_state* state = fe->demodulator_priv; + + if (state->errmode != STATUS_UCBLOCKS) + return -ENOSYS; + + state->ucblocks += stv0299_readreg(state, 0x1e); + state->ucblocks += (stv0299_readreg(state, 0x1d) << 8); + *ucblocks = state->ucblocks; + + return 0; +} + +static int stv0299_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0299_state* state = fe->demodulator_priv; + int invval = 0; + + dprintk ("%s : FE_SET_FRONTEND\n", __func__); + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + // set the inversion + if (p->inversion == INVERSION_OFF) invval = 0; + else if (p->inversion == INVERSION_ON) invval = 1; + else { + printk("stv0299 does not support auto-inversion\n"); + return -EINVAL; + } + if (state->config->invert) invval = (~invval) & 1; + stv0299_writeregI(state, 0x0c, (stv0299_readreg(state, 0x0c) & 0xfe) | invval); + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + stv0299_set_FEC(state, p->fec_inner); + stv0299_set_symbolrate(fe, p->symbol_rate); + stv0299_writeregI(state, 0x22, 0x00); + stv0299_writeregI(state, 0x23, 0x00); + + state->tuner_frequency = p->frequency; + state->fec_inner = p->fec_inner; + state->symbol_rate = p->symbol_rate; + + return 0; +} + +static int stv0299_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0299_state* state = fe->demodulator_priv; + s32 derot_freq; + int invval; + + derot_freq = (s32)(s16) ((stv0299_readreg (state, 0x22) << 8) + | stv0299_readreg (state, 0x23)); + + derot_freq *= (state->config->mclk >> 16); + derot_freq += 500; + derot_freq /= 1000; + + p->frequency += derot_freq; + + invval = stv0299_readreg (state, 0x0c) & 1; + if (state->config->invert) invval = (~invval) & 1; + p->inversion = invval ? INVERSION_ON : INVERSION_OFF; + + p->fec_inner = stv0299_get_fec(state); + p->symbol_rate = stv0299_get_symbolrate(state); + + return 0; +} + +static int stv0299_sleep(struct dvb_frontend* fe) +{ + struct stv0299_state* state = fe->demodulator_priv; + + stv0299_writeregI(state, 0x02, 0xb0 | state->mcr_reg); + state->initialised = 0; + + return 0; +} + +static int stv0299_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct stv0299_state* state = fe->demodulator_priv; + + if (enable) { + stv0299_writeregI(state, 0x05, 0xb5); + } else { + stv0299_writeregI(state, 0x05, 0x35); + } + udelay(1); + return 0; +} + +static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + struct stv0299_state* state = fe->demodulator_priv; + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + + fesettings->min_delay_ms = state->config->min_delay_ms; + if (p->symbol_rate < 10000000) { + fesettings->step_size = p->symbol_rate / 32000; + fesettings->max_drift = 5000; + } else { + fesettings->step_size = p->symbol_rate / 16000; + fesettings->max_drift = p->symbol_rate / 2000; + } + return 0; +} + +static void stv0299_release(struct dvb_frontend* fe) +{ + struct stv0299_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops stv0299_ops; + +struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, + struct i2c_adapter* i2c) +{ + struct stv0299_state* state = NULL; + int id; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct stv0299_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + state->tuner_frequency = 0; + state->symbol_rate = 0; + state->fec_inner = 0; + state->errmode = STATUS_BER; + + /* check if the demod is there */ + stv0299_writeregI(state, 0x02, 0x30); /* standby off */ + msleep(200); + id = stv0299_readreg(state, 0x00); + + /* register 0x00 contains 0xa1 for STV0299 and STV0299B */ + /* register 0x00 might contain 0x80 when returning from standby */ + if (id != 0xa1 && id != 0x80) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &stv0299_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops stv0299_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "ST STV0299 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = stv0299_release, + + .init = stv0299_init, + .sleep = stv0299_sleep, + .write = stv0299_write, + .i2c_gate_ctrl = stv0299_i2c_gate_ctrl, + + .set_frontend = stv0299_set_frontend, + .get_frontend = stv0299_get_frontend, + .get_tune_settings = stv0299_get_tune_settings, + + .read_status = stv0299_read_status, + .read_ber = stv0299_read_ber, + .read_signal_strength = stv0299_read_signal_strength, + .read_snr = stv0299_read_snr, + .read_ucblocks = stv0299_read_ucblocks, + + .diseqc_send_master_cmd = stv0299_send_diseqc_msg, + .diseqc_send_burst = stv0299_send_diseqc_burst, + .set_tone = stv0299_set_tone, + .set_voltage = stv0299_set_voltage, + .dishnetwork_send_legacy_command = stv0299_send_legacy_dish_cmd, +}; + +module_param(debug_legacy_dish_switch, int, 0444); +MODULE_PARM_DESC(debug_legacy_dish_switch, "Enable timing analysis for Dish Network legacy switches"); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver"); +MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, " + "Andreas Oberritter, Andrew de Quincey, Kenneth Aafly"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(stv0299_attach); diff --git a/drivers/media/dvb-frontends/stv0299.h b/drivers/media/dvb-frontends/stv0299.h new file mode 100644 index 00000000..06f70fc8 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0299.h @@ -0,0 +1,118 @@ +/* + Driver for ST STV0299 demodulator + + Copyright (C) 2001-2002 Convergence Integrated Media GmbH + , + , + + + + Philips SU1278/SH + + Copyright (C) 2002 by Peter Schildmann + + + LG TDQF-S001F + + Copyright (C) 2002 Felix Domke + & Andreas Oberritter + + + Support for Samsung TBMU24112IMB used on Technisat SkyStar2 rev. 2.6B + + Copyright (C) 2003 Vadim Catana : + + Support for Philips SU1278 on Technotrend hardware + + Copyright (C) 2004 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef STV0299_H +#define STV0299_H + +#include +#include "dvb_frontend.h" + +#define STV0299_LOCKOUTPUT_0 0 +#define STV0299_LOCKOUTPUT_1 1 +#define STV0299_LOCKOUTPUT_CF 2 +#define STV0299_LOCKOUTPUT_LK 3 + +#define STV0299_VOLT13_OP0 0 +#define STV0299_VOLT13_OP1 1 + +struct stv0299_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* inittab - array of pairs of values. + * First of each pair is the register, second is the value. + * List should be terminated with an 0xff, 0xff pair. + */ + const u8* inittab; + + /* master clock to use */ + u32 mclk; + + /* does the inversion require inversion? */ + u8 invert:1; + + /* Skip reinitialisation? */ + u8 skip_reinit:1; + + /* LOCK OUTPUT setting */ + u8 lock_output:2; + + /* Is 13v controlled by OP0 or OP1? */ + u8 volt13_op0_op1:1; + + /* Turn-off OP0? */ + u8 op0_off:1; + + /* minimum delay before retuning */ + int min_delay_ms; + + /* Set the symbol rate */ + int (*set_symbol_rate)(struct dvb_frontend *fe, u32 srate, u32 ratio); + + /* Set device param to start dma */ + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); +}; + +#if IS_ENABLED(CONFIG_DVB_STV0299) +extern struct dvb_frontend *stv0299_attach(const struct stv0299_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *stv0299_attach(const struct stv0299_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_STV0299 + +static inline int stv0299_writereg(struct dvb_frontend *fe, u8 reg, u8 val) { + int r = 0; + u8 buf[] = {reg, val}; + if (fe->ops.write) + r = fe->ops.write(fe, buf, 2); + return r; +} + +#endif // STV0299_H diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c new file mode 100644 index 00000000..f6c72779 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0367.c @@ -0,0 +1,3462 @@ +/* + * stv0367.c + * + * Driver for ST STV0367 DVB-T & DVB-C demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2010,2011 NetUP Inc. + * Copyright (C) 2010,2011 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "stv0367.h" +#include "stv0367_regs.h" +#include "stv0367_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +static int stvdebug; +module_param_named(debug, stvdebug, int, 0644); + +static int i2cdebug; +module_param_named(i2c_debug, i2cdebug, int, 0644); + +#define dprintk(args...) \ + do { \ + if (stvdebug) \ + printk(KERN_DEBUG args); \ + } while (0) + /* DVB-C */ + +struct stv0367cab_state { + enum stv0367_cab_signal_type state; + u32 mclk; + u32 adc_clk; + s32 search_range; + s32 derot_offset; + /* results */ + int locked; /* channel found */ + u32 freq_khz; /* found frequency (in kHz) */ + u32 symbol_rate; /* found symbol rate (in Bds) */ + enum stv0367cab_mod modulation; /* modulation */ + fe_spectral_inversion_t spect_inv; /* Spectrum Inversion */ +}; + +struct stv0367ter_state { + /* DVB-T */ + enum stv0367_ter_signal_type state; + enum stv0367_ter_if_iq_mode if_iq_mode; + enum stv0367_ter_mode mode;/* mode 2K or 8K */ + fe_guard_interval_t guard; + enum stv0367_ter_hierarchy hierarchy; + u32 frequency; + fe_spectral_inversion_t sense; /* current search spectrum */ + u8 force; /* force mode/guard */ + u8 bw; /* channel width 6, 7 or 8 in MHz */ + u8 pBW; /* channel width used during previous lock */ + u32 pBER; + u32 pPER; + u32 ucblocks; + s8 echo_pos; /* echo position */ + u8 first_lock; + u8 unlock_counter; + u32 agc_val; +}; + +struct stv0367_state { + struct dvb_frontend fe; + struct i2c_adapter *i2c; + /* config settings */ + const struct stv0367_config *config; + u8 chip_id; + /* DVB-C */ + struct stv0367cab_state *cab_state; + /* DVB-T */ + struct stv0367ter_state *ter_state; +}; + +struct st_register { + u16 addr; + u8 value; +}; + +/* values for STV4100 XTAL=30M int clk=53.125M*/ +static struct st_register def0367ter[STV0367TER_NBREGS] = { + {R367TER_ID, 0x60}, + {R367TER_I2CRPT, 0xa0}, + /* {R367TER_I2CRPT, 0x22},*/ + {R367TER_TOPCTRL, 0x00},/* for xc5000; was 0x02 */ + {R367TER_IOCFG0, 0x40}, + {R367TER_DAC0R, 0x00}, + {R367TER_IOCFG1, 0x00}, + {R367TER_DAC1R, 0x00}, + {R367TER_IOCFG2, 0x62}, + {R367TER_SDFR, 0x00}, + {R367TER_STATUS, 0xf8}, + {R367TER_AUX_CLK, 0x0a}, + {R367TER_FREESYS1, 0x00}, + {R367TER_FREESYS2, 0x00}, + {R367TER_FREESYS3, 0x00}, + {R367TER_GPIO_CFG, 0x55}, + {R367TER_GPIO_CMD, 0x00}, + {R367TER_AGC2MAX, 0xff}, + {R367TER_AGC2MIN, 0x00}, + {R367TER_AGC1MAX, 0xff}, + {R367TER_AGC1MIN, 0x00}, + {R367TER_AGCR, 0xbc}, + {R367TER_AGC2TH, 0x00}, + {R367TER_AGC12C, 0x00}, + {R367TER_AGCCTRL1, 0x85}, + {R367TER_AGCCTRL2, 0x1f}, + {R367TER_AGC1VAL1, 0x00}, + {R367TER_AGC1VAL2, 0x00}, + {R367TER_AGC2VAL1, 0x6f}, + {R367TER_AGC2VAL2, 0x05}, + {R367TER_AGC2PGA, 0x00}, + {R367TER_OVF_RATE1, 0x00}, + {R367TER_OVF_RATE2, 0x00}, + {R367TER_GAIN_SRC1, 0xaa},/* for xc5000; was 0x2b */ + {R367TER_GAIN_SRC2, 0xd6},/* for xc5000; was 0x04 */ + {R367TER_INC_DEROT1, 0x55}, + {R367TER_INC_DEROT2, 0x55}, + {R367TER_PPM_CPAMP_DIR, 0x2c}, + {R367TER_PPM_CPAMP_INV, 0x00}, + {R367TER_FREESTFE_1, 0x00}, + {R367TER_FREESTFE_2, 0x1c}, + {R367TER_DCOFFSET, 0x00}, + {R367TER_EN_PROCESS, 0x05}, + {R367TER_SDI_SMOOTHER, 0x80}, + {R367TER_FE_LOOP_OPEN, 0x1c}, + {R367TER_FREQOFF1, 0x00}, + {R367TER_FREQOFF2, 0x00}, + {R367TER_FREQOFF3, 0x00}, + {R367TER_TIMOFF1, 0x00}, + {R367TER_TIMOFF2, 0x00}, + {R367TER_EPQ, 0x02}, + {R367TER_EPQAUTO, 0x01}, + {R367TER_SYR_UPDATE, 0xf5}, + {R367TER_CHPFREE, 0x00}, + {R367TER_PPM_STATE_MAC, 0x23}, + {R367TER_INR_THRESHOLD, 0xff}, + {R367TER_EPQ_TPS_ID_CELL, 0xf9}, + {R367TER_EPQ_CFG, 0x00}, + {R367TER_EPQ_STATUS, 0x01}, + {R367TER_AUTORELOCK, 0x81}, + {R367TER_BER_THR_VMSB, 0x00}, + {R367TER_BER_THR_MSB, 0x00}, + {R367TER_BER_THR_LSB, 0x00}, + {R367TER_CCD, 0x83}, + {R367TER_SPECTR_CFG, 0x00}, + {R367TER_CHC_DUMMY, 0x18}, + {R367TER_INC_CTL, 0x88}, + {R367TER_INCTHRES_COR1, 0xb4}, + {R367TER_INCTHRES_COR2, 0x96}, + {R367TER_INCTHRES_DET1, 0x0e}, + {R367TER_INCTHRES_DET2, 0x11}, + {R367TER_IIR_CELLNB, 0x8d}, + {R367TER_IIRCX_COEFF1_MSB, 0x00}, + {R367TER_IIRCX_COEFF1_LSB, 0x00}, + {R367TER_IIRCX_COEFF2_MSB, 0x09}, + {R367TER_IIRCX_COEFF2_LSB, 0x18}, + {R367TER_IIRCX_COEFF3_MSB, 0x14}, + {R367TER_IIRCX_COEFF3_LSB, 0x9c}, + {R367TER_IIRCX_COEFF4_MSB, 0x00}, + {R367TER_IIRCX_COEFF4_LSB, 0x00}, + {R367TER_IIRCX_COEFF5_MSB, 0x36}, + {R367TER_IIRCX_COEFF5_LSB, 0x42}, + {R367TER_FEPATH_CFG, 0x00}, + {R367TER_PMC1_FUNC, 0x65}, + {R367TER_PMC1_FOR, 0x00}, + {R367TER_PMC2_FUNC, 0x00}, + {R367TER_STATUS_ERR_DA, 0xe0}, + {R367TER_DIG_AGC_R, 0xfe}, + {R367TER_COMAGC_TARMSB, 0x0b}, + {R367TER_COM_AGC_TAR_ENMODE, 0x41}, + {R367TER_COM_AGC_CFG, 0x3e}, + {R367TER_COM_AGC_GAIN1, 0x39}, + {R367TER_AUT_AGC_TARGETMSB, 0x0b}, + {R367TER_LOCK_DET_MSB, 0x01}, + {R367TER_AGCTAR_LOCK_LSBS, 0x40}, + {R367TER_AUT_GAIN_EN, 0xf4}, + {R367TER_AUT_CFG, 0xf0}, + {R367TER_LOCKN, 0x23}, + {R367TER_INT_X_3, 0x00}, + {R367TER_INT_X_2, 0x03}, + {R367TER_INT_X_1, 0x8d}, + {R367TER_INT_X_0, 0xa0}, + {R367TER_MIN_ERRX_MSB, 0x00}, + {R367TER_COR_CTL, 0x23}, + {R367TER_COR_STAT, 0xf6}, + {R367TER_COR_INTEN, 0x00}, + {R367TER_COR_INTSTAT, 0x3f}, + {R367TER_COR_MODEGUARD, 0x03}, + {R367TER_AGC_CTL, 0x08}, + {R367TER_AGC_MANUAL1, 0x00}, + {R367TER_AGC_MANUAL2, 0x00}, + {R367TER_AGC_TARG, 0x16}, + {R367TER_AGC_GAIN1, 0x53}, + {R367TER_AGC_GAIN2, 0x1d}, + {R367TER_RESERVED_1, 0x00}, + {R367TER_RESERVED_2, 0x00}, + {R367TER_RESERVED_3, 0x00}, + {R367TER_CAS_CTL, 0x44}, + {R367TER_CAS_FREQ, 0xb3}, + {R367TER_CAS_DAGCGAIN, 0x12}, + {R367TER_SYR_CTL, 0x04}, + {R367TER_SYR_STAT, 0x10}, + {R367TER_SYR_NCO1, 0x00}, + {R367TER_SYR_NCO2, 0x00}, + {R367TER_SYR_OFFSET1, 0x00}, + {R367TER_SYR_OFFSET2, 0x00}, + {R367TER_FFT_CTL, 0x00}, + {R367TER_SCR_CTL, 0x70}, + {R367TER_PPM_CTL1, 0xf8}, + {R367TER_TRL_CTL, 0x14},/* for xc5000; was 0xac */ + {R367TER_TRL_NOMRATE1, 0xae},/* for xc5000; was 0x1e */ + {R367TER_TRL_NOMRATE2, 0x56},/* for xc5000; was 0x58 */ + {R367TER_TRL_TIME1, 0x1d}, + {R367TER_TRL_TIME2, 0xfc}, + {R367TER_CRL_CTL, 0x24}, + {R367TER_CRL_FREQ1, 0xad}, + {R367TER_CRL_FREQ2, 0x9d}, + {R367TER_CRL_FREQ3, 0xff}, + {R367TER_CHC_CTL, 0x01}, + {R367TER_CHC_SNR, 0xf0}, + {R367TER_BDI_CTL, 0x00}, + {R367TER_DMP_CTL, 0x00}, + {R367TER_TPS_RCVD1, 0x30}, + {R367TER_TPS_RCVD2, 0x02}, + {R367TER_TPS_RCVD3, 0x01}, + {R367TER_TPS_RCVD4, 0x00}, + {R367TER_TPS_ID_CELL1, 0x00}, + {R367TER_TPS_ID_CELL2, 0x00}, + {R367TER_TPS_RCVD5_SET1, 0x02}, + {R367TER_TPS_SET2, 0x02}, + {R367TER_TPS_SET3, 0x01}, + {R367TER_TPS_CTL, 0x00}, + {R367TER_CTL_FFTOSNUM, 0x34}, + {R367TER_TESTSELECT, 0x09}, + {R367TER_MSC_REV, 0x0a}, + {R367TER_PIR_CTL, 0x00}, + {R367TER_SNR_CARRIER1, 0xa1}, + {R367TER_SNR_CARRIER2, 0x9a}, + {R367TER_PPM_CPAMP, 0x2c}, + {R367TER_TSM_AP0, 0x00}, + {R367TER_TSM_AP1, 0x00}, + {R367TER_TSM_AP2 , 0x00}, + {R367TER_TSM_AP3, 0x00}, + {R367TER_TSM_AP4, 0x00}, + {R367TER_TSM_AP5, 0x00}, + {R367TER_TSM_AP6, 0x00}, + {R367TER_TSM_AP7, 0x00}, + {R367TER_TSTRES, 0x00}, + {R367TER_ANACTRL, 0x0D},/* PLL stoped, restart at init!!! */ + {R367TER_TSTBUS, 0x00}, + {R367TER_TSTRATE, 0x00}, + {R367TER_CONSTMODE, 0x01}, + {R367TER_CONSTCARR1, 0x00}, + {R367TER_CONSTCARR2, 0x00}, + {R367TER_ICONSTEL, 0x0a}, + {R367TER_QCONSTEL, 0x15}, + {R367TER_TSTBISTRES0, 0x00}, + {R367TER_TSTBISTRES1, 0x00}, + {R367TER_TSTBISTRES2, 0x28}, + {R367TER_TSTBISTRES3, 0x00}, + {R367TER_RF_AGC1, 0xff}, + {R367TER_RF_AGC2, 0x83}, + {R367TER_ANADIGCTRL, 0x19}, + {R367TER_PLLMDIV, 0x01},/* for xc5000; was 0x0c */ + {R367TER_PLLNDIV, 0x06},/* for xc5000; was 0x55 */ + {R367TER_PLLSETUP, 0x18}, + {R367TER_DUAL_AD12, 0x0C},/* for xc5000 AGC voltage 1.6V */ + {R367TER_TSTBIST, 0x00}, + {R367TER_PAD_COMP_CTRL, 0x00}, + {R367TER_PAD_COMP_WR, 0x00}, + {R367TER_PAD_COMP_RD, 0xe0}, + {R367TER_SYR_TARGET_FFTADJT_MSB, 0x00}, + {R367TER_SYR_TARGET_FFTADJT_LSB, 0x00}, + {R367TER_SYR_TARGET_CHCADJT_MSB, 0x00}, + {R367TER_SYR_TARGET_CHCADJT_LSB, 0x00}, + {R367TER_SYR_FLAG, 0x00}, + {R367TER_CRL_TARGET1, 0x00}, + {R367TER_CRL_TARGET2, 0x00}, + {R367TER_CRL_TARGET3, 0x00}, + {R367TER_CRL_TARGET4, 0x00}, + {R367TER_CRL_FLAG, 0x00}, + {R367TER_TRL_TARGET1, 0x00}, + {R367TER_TRL_TARGET2, 0x00}, + {R367TER_TRL_CHC, 0x00}, + {R367TER_CHC_SNR_TARG, 0x00}, + {R367TER_TOP_TRACK, 0x00}, + {R367TER_TRACKER_FREE1, 0x00}, + {R367TER_ERROR_CRL1, 0x00}, + {R367TER_ERROR_CRL2, 0x00}, + {R367TER_ERROR_CRL3, 0x00}, + {R367TER_ERROR_CRL4, 0x00}, + {R367TER_DEC_NCO1, 0x2c}, + {R367TER_DEC_NCO2, 0x0f}, + {R367TER_DEC_NCO3, 0x20}, + {R367TER_SNR, 0xf1}, + {R367TER_SYR_FFTADJ1, 0x00}, + {R367TER_SYR_FFTADJ2, 0x00}, + {R367TER_SYR_CHCADJ1, 0x00}, + {R367TER_SYR_CHCADJ2, 0x00}, + {R367TER_SYR_OFF, 0x00}, + {R367TER_PPM_OFFSET1, 0x00}, + {R367TER_PPM_OFFSET2, 0x03}, + {R367TER_TRACKER_FREE2, 0x00}, + {R367TER_DEBG_LT10, 0x00}, + {R367TER_DEBG_LT11, 0x00}, + {R367TER_DEBG_LT12, 0x00}, + {R367TER_DEBG_LT13, 0x00}, + {R367TER_DEBG_LT14, 0x00}, + {R367TER_DEBG_LT15, 0x00}, + {R367TER_DEBG_LT16, 0x00}, + {R367TER_DEBG_LT17, 0x00}, + {R367TER_DEBG_LT18, 0x00}, + {R367TER_DEBG_LT19, 0x00}, + {R367TER_DEBG_LT1A, 0x00}, + {R367TER_DEBG_LT1B, 0x00}, + {R367TER_DEBG_LT1C, 0x00}, + {R367TER_DEBG_LT1D, 0x00}, + {R367TER_DEBG_LT1E, 0x00}, + {R367TER_DEBG_LT1F, 0x00}, + {R367TER_RCCFGH, 0x00}, + {R367TER_RCCFGM, 0x00}, + {R367TER_RCCFGL, 0x00}, + {R367TER_RCINSDELH, 0x00}, + {R367TER_RCINSDELM, 0x00}, + {R367TER_RCINSDELL, 0x00}, + {R367TER_RCSTATUS, 0x00}, + {R367TER_RCSPEED, 0x6f}, + {R367TER_RCDEBUGM, 0xe7}, + {R367TER_RCDEBUGL, 0x9b}, + {R367TER_RCOBSCFG, 0x00}, + {R367TER_RCOBSM, 0x00}, + {R367TER_RCOBSL, 0x00}, + {R367TER_RCFECSPY, 0x00}, + {R367TER_RCFSPYCFG, 0x00}, + {R367TER_RCFSPYDATA, 0x00}, + {R367TER_RCFSPYOUT, 0x00}, + {R367TER_RCFSTATUS, 0x00}, + {R367TER_RCFGOODPACK, 0x00}, + {R367TER_RCFPACKCNT, 0x00}, + {R367TER_RCFSPYMISC, 0x00}, + {R367TER_RCFBERCPT4, 0x00}, + {R367TER_RCFBERCPT3, 0x00}, + {R367TER_RCFBERCPT2, 0x00}, + {R367TER_RCFBERCPT1, 0x00}, + {R367TER_RCFBERCPT0, 0x00}, + {R367TER_RCFBERERR2, 0x00}, + {R367TER_RCFBERERR1, 0x00}, + {R367TER_RCFBERERR0, 0x00}, + {R367TER_RCFSTATESM, 0x00}, + {R367TER_RCFSTATESL, 0x00}, + {R367TER_RCFSPYBER, 0x00}, + {R367TER_RCFSPYDISTM, 0x00}, + {R367TER_RCFSPYDISTL, 0x00}, + {R367TER_RCFSPYOBS7, 0x00}, + {R367TER_RCFSPYOBS6, 0x00}, + {R367TER_RCFSPYOBS5, 0x00}, + {R367TER_RCFSPYOBS4, 0x00}, + {R367TER_RCFSPYOBS3, 0x00}, + {R367TER_RCFSPYOBS2, 0x00}, + {R367TER_RCFSPYOBS1, 0x00}, + {R367TER_RCFSPYOBS0, 0x00}, + {R367TER_TSGENERAL, 0x00}, + {R367TER_RC1SPEED, 0x6f}, + {R367TER_TSGSTATUS, 0x18}, + {R367TER_FECM, 0x01}, + {R367TER_VTH12, 0xff}, + {R367TER_VTH23, 0xa1}, + {R367TER_VTH34, 0x64}, + {R367TER_VTH56, 0x40}, + {R367TER_VTH67, 0x00}, + {R367TER_VTH78, 0x2c}, + {R367TER_VITCURPUN, 0x12}, + {R367TER_VERROR, 0x01}, + {R367TER_PRVIT, 0x3f}, + {R367TER_VAVSRVIT, 0x00}, + {R367TER_VSTATUSVIT, 0xbd}, + {R367TER_VTHINUSE, 0xa1}, + {R367TER_KDIV12, 0x20}, + {R367TER_KDIV23, 0x40}, + {R367TER_KDIV34, 0x20}, + {R367TER_KDIV56, 0x30}, + {R367TER_KDIV67, 0x00}, + {R367TER_KDIV78, 0x30}, + {R367TER_SIGPOWER, 0x54}, + {R367TER_DEMAPVIT, 0x40}, + {R367TER_VITSCALE, 0x00}, + {R367TER_FFEC1PRG, 0x00}, + {R367TER_FVITCURPUN, 0x12}, + {R367TER_FVERROR, 0x01}, + {R367TER_FVSTATUSVIT, 0xbd}, + {R367TER_DEBUG_LT1, 0x00}, + {R367TER_DEBUG_LT2, 0x00}, + {R367TER_DEBUG_LT3, 0x00}, + {R367TER_TSTSFMET, 0x00}, + {R367TER_SELOUT, 0x00}, + {R367TER_TSYNC, 0x00}, + {R367TER_TSTERR, 0x00}, + {R367TER_TSFSYNC, 0x00}, + {R367TER_TSTSFERR, 0x00}, + {R367TER_TSTTSSF1, 0x01}, + {R367TER_TSTTSSF2, 0x1f}, + {R367TER_TSTTSSF3, 0x00}, + {R367TER_TSTTS1, 0x00}, + {R367TER_TSTTS2, 0x1f}, + {R367TER_TSTTS3, 0x01}, + {R367TER_TSTTS4, 0x00}, + {R367TER_TSTTSRC, 0x00}, + {R367TER_TSTTSRS, 0x00}, + {R367TER_TSSTATEM, 0xb0}, + {R367TER_TSSTATEL, 0x40}, + {R367TER_TSCFGH, 0xC0}, + {R367TER_TSCFGM, 0xc0},/* for xc5000; was 0x00 */ + {R367TER_TSCFGL, 0x20}, + {R367TER_TSSYNC, 0x00}, + {R367TER_TSINSDELH, 0x00}, + {R367TER_TSINSDELM, 0x00}, + {R367TER_TSINSDELL, 0x00}, + {R367TER_TSDIVN, 0x03}, + {R367TER_TSDIVPM, 0x00}, + {R367TER_TSDIVPL, 0x00}, + {R367TER_TSDIVQM, 0x00}, + {R367TER_TSDIVQL, 0x00}, + {R367TER_TSDILSTKM, 0x00}, + {R367TER_TSDILSTKL, 0x00}, + {R367TER_TSSPEED, 0x40},/* for xc5000; was 0x6f */ + {R367TER_TSSTATUS, 0x81}, + {R367TER_TSSTATUS2, 0x6a}, + {R367TER_TSBITRATEM, 0x0f}, + {R367TER_TSBITRATEL, 0xc6}, + {R367TER_TSPACKLENM, 0x00}, + {R367TER_TSPACKLENL, 0xfc}, + {R367TER_TSBLOCLENM, 0x0a}, + {R367TER_TSBLOCLENL, 0x80}, + {R367TER_TSDLYH, 0x90}, + {R367TER_TSDLYM, 0x68}, + {R367TER_TSDLYL, 0x01}, + {R367TER_TSNPDAV, 0x00}, + {R367TER_TSBUFSTATH, 0x00}, + {R367TER_TSBUFSTATM, 0x00}, + {R367TER_TSBUFSTATL, 0x00}, + {R367TER_TSDEBUGM, 0xcf}, + {R367TER_TSDEBUGL, 0x1e}, + {R367TER_TSDLYSETH, 0x00}, + {R367TER_TSDLYSETM, 0x68}, + {R367TER_TSDLYSETL, 0x00}, + {R367TER_TSOBSCFG, 0x00}, + {R367TER_TSOBSM, 0x47}, + {R367TER_TSOBSL, 0x1f}, + {R367TER_ERRCTRL1, 0x95}, + {R367TER_ERRCNT1H, 0x80}, + {R367TER_ERRCNT1M, 0x00}, + {R367TER_ERRCNT1L, 0x00}, + {R367TER_ERRCTRL2, 0x95}, + {R367TER_ERRCNT2H, 0x00}, + {R367TER_ERRCNT2M, 0x00}, + {R367TER_ERRCNT2L, 0x00}, + {R367TER_FECSPY, 0x88}, + {R367TER_FSPYCFG, 0x2c}, + {R367TER_FSPYDATA, 0x3a}, + {R367TER_FSPYOUT, 0x06}, + {R367TER_FSTATUS, 0x61}, + {R367TER_FGOODPACK, 0xff}, + {R367TER_FPACKCNT, 0xff}, + {R367TER_FSPYMISC, 0x66}, + {R367TER_FBERCPT4, 0x00}, + {R367TER_FBERCPT3, 0x00}, + {R367TER_FBERCPT2, 0x36}, + {R367TER_FBERCPT1, 0x36}, + {R367TER_FBERCPT0, 0x14}, + {R367TER_FBERERR2, 0x00}, + {R367TER_FBERERR1, 0x03}, + {R367TER_FBERERR0, 0x28}, + {R367TER_FSTATESM, 0x00}, + {R367TER_FSTATESL, 0x02}, + {R367TER_FSPYBER, 0x00}, + {R367TER_FSPYDISTM, 0x01}, + {R367TER_FSPYDISTL, 0x9f}, + {R367TER_FSPYOBS7, 0xc9}, + {R367TER_FSPYOBS6, 0x99}, + {R367TER_FSPYOBS5, 0x08}, + {R367TER_FSPYOBS4, 0xec}, + {R367TER_FSPYOBS3, 0x01}, + {R367TER_FSPYOBS2, 0x0f}, + {R367TER_FSPYOBS1, 0xf5}, + {R367TER_FSPYOBS0, 0x08}, + {R367TER_SFDEMAP, 0x40}, + {R367TER_SFERROR, 0x00}, + {R367TER_SFAVSR, 0x30}, + {R367TER_SFECSTATUS, 0xcc}, + {R367TER_SFKDIV12, 0x20}, + {R367TER_SFKDIV23, 0x40}, + {R367TER_SFKDIV34, 0x20}, + {R367TER_SFKDIV56, 0x20}, + {R367TER_SFKDIV67, 0x00}, + {R367TER_SFKDIV78, 0x20}, + {R367TER_SFDILSTKM, 0x00}, + {R367TER_SFDILSTKL, 0x00}, + {R367TER_SFSTATUS, 0xb5}, + {R367TER_SFDLYH, 0x90}, + {R367TER_SFDLYM, 0x60}, + {R367TER_SFDLYL, 0x01}, + {R367TER_SFDLYSETH, 0xc0}, + {R367TER_SFDLYSETM, 0x60}, + {R367TER_SFDLYSETL, 0x00}, + {R367TER_SFOBSCFG, 0x00}, + {R367TER_SFOBSM, 0x47}, + {R367TER_SFOBSL, 0x05}, + {R367TER_SFECINFO, 0x40}, + {R367TER_SFERRCTRL, 0x74}, + {R367TER_SFERRCNTH, 0x80}, + {R367TER_SFERRCNTM , 0x00}, + {R367TER_SFERRCNTL, 0x00}, + {R367TER_SYMBRATEM, 0x2f}, + {R367TER_SYMBRATEL, 0x50}, + {R367TER_SYMBSTATUS, 0x7f}, + {R367TER_SYMBCFG, 0x00}, + {R367TER_SYMBFIFOM, 0xf4}, + {R367TER_SYMBFIFOL, 0x0d}, + {R367TER_SYMBOFFSM, 0xf0}, + {R367TER_SYMBOFFSL, 0x2d}, + {R367TER_DEBUG_LT4, 0x00}, + {R367TER_DEBUG_LT5, 0x00}, + {R367TER_DEBUG_LT6, 0x00}, + {R367TER_DEBUG_LT7, 0x00}, + {R367TER_DEBUG_LT8, 0x00}, + {R367TER_DEBUG_LT9, 0x00}, +}; + +#define RF_LOOKUP_TABLE_SIZE 31 +#define RF_LOOKUP_TABLE2_SIZE 16 +/* RF Level (for RF AGC->AGC1) Lookup Table, depends on the board and tuner.*/ +s32 stv0367cab_RF_LookUp1[RF_LOOKUP_TABLE_SIZE][RF_LOOKUP_TABLE_SIZE] = { + {/*AGC1*/ + 48, 50, 51, 53, 54, 56, 57, 58, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, + 76, 77, 78, 80, 83, 85, 88, + }, {/*RF(dbm)*/ + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, + 34, 35, 36, 37, 38, 39, 41, 42, 43, 44, 46, 47, + 49, 50, 52, 53, 54, 55, 56, + } +}; +/* RF Level (for IF AGC->AGC2) Lookup Table, depends on the board and tuner.*/ +s32 stv0367cab_RF_LookUp2[RF_LOOKUP_TABLE2_SIZE][RF_LOOKUP_TABLE2_SIZE] = { + {/*AGC2*/ + 28, 29, 31, 32, 34, 35, 36, 37, + 38, 39, 40, 41, 42, 43, 44, 45, + }, {/*RF(dbm)*/ + 57, 58, 59, 60, 61, 62, 63, 64, + 65, 66, 67, 68, 69, 70, 71, 72, + } +}; + +static struct st_register def0367cab[STV0367CAB_NBREGS] = { + {R367CAB_ID, 0x60}, + {R367CAB_I2CRPT, 0xa0}, + /*{R367CAB_I2CRPT, 0x22},*/ + {R367CAB_TOPCTRL, 0x10}, + {R367CAB_IOCFG0, 0x80}, + {R367CAB_DAC0R, 0x00}, + {R367CAB_IOCFG1, 0x00}, + {R367CAB_DAC1R, 0x00}, + {R367CAB_IOCFG2, 0x00}, + {R367CAB_SDFR, 0x00}, + {R367CAB_AUX_CLK, 0x00}, + {R367CAB_FREESYS1, 0x00}, + {R367CAB_FREESYS2, 0x00}, + {R367CAB_FREESYS3, 0x00}, + {R367CAB_GPIO_CFG, 0x55}, + {R367CAB_GPIO_CMD, 0x01}, + {R367CAB_TSTRES, 0x00}, + {R367CAB_ANACTRL, 0x0d},/* was 0x00 need to check - I.M.L.*/ + {R367CAB_TSTBUS, 0x00}, + {R367CAB_RF_AGC1, 0xea}, + {R367CAB_RF_AGC2, 0x82}, + {R367CAB_ANADIGCTRL, 0x0b}, + {R367CAB_PLLMDIV, 0x01}, + {R367CAB_PLLNDIV, 0x08}, + {R367CAB_PLLSETUP, 0x18}, + {R367CAB_DUAL_AD12, 0x0C}, /* for xc5000 AGC voltage 1.6V */ + {R367CAB_TSTBIST, 0x00}, + {R367CAB_CTRL_1, 0x00}, + {R367CAB_CTRL_2, 0x03}, + {R367CAB_IT_STATUS1, 0x2b}, + {R367CAB_IT_STATUS2, 0x08}, + {R367CAB_IT_EN1, 0x00}, + {R367CAB_IT_EN2, 0x00}, + {R367CAB_CTRL_STATUS, 0x04}, + {R367CAB_TEST_CTL, 0x00}, + {R367CAB_AGC_CTL, 0x73}, + {R367CAB_AGC_IF_CFG, 0x50}, + {R367CAB_AGC_RF_CFG, 0x00}, + {R367CAB_AGC_PWM_CFG, 0x03}, + {R367CAB_AGC_PWR_REF_L, 0x5a}, + {R367CAB_AGC_PWR_REF_H, 0x00}, + {R367CAB_AGC_RF_TH_L, 0xff}, + {R367CAB_AGC_RF_TH_H, 0x07}, + {R367CAB_AGC_IF_LTH_L, 0x00}, + {R367CAB_AGC_IF_LTH_H, 0x08}, + {R367CAB_AGC_IF_HTH_L, 0xff}, + {R367CAB_AGC_IF_HTH_H, 0x07}, + {R367CAB_AGC_PWR_RD_L, 0xa0}, + {R367CAB_AGC_PWR_RD_M, 0xe9}, + {R367CAB_AGC_PWR_RD_H, 0x03}, + {R367CAB_AGC_PWM_IFCMD_L, 0xe4}, + {R367CAB_AGC_PWM_IFCMD_H, 0x00}, + {R367CAB_AGC_PWM_RFCMD_L, 0xff}, + {R367CAB_AGC_PWM_RFCMD_H, 0x07}, + {R367CAB_IQDEM_CFG, 0x01}, + {R367CAB_MIX_NCO_LL, 0x22}, + {R367CAB_MIX_NCO_HL, 0x96}, + {R367CAB_MIX_NCO_HH, 0x55}, + {R367CAB_SRC_NCO_LL, 0xff}, + {R367CAB_SRC_NCO_LH, 0x0c}, + {R367CAB_SRC_NCO_HL, 0xf5}, + {R367CAB_SRC_NCO_HH, 0x20}, + {R367CAB_IQDEM_GAIN_SRC_L, 0x06}, + {R367CAB_IQDEM_GAIN_SRC_H, 0x01}, + {R367CAB_IQDEM_DCRM_CFG_LL, 0xfe}, + {R367CAB_IQDEM_DCRM_CFG_LH, 0xff}, + {R367CAB_IQDEM_DCRM_CFG_HL, 0x0f}, + {R367CAB_IQDEM_DCRM_CFG_HH, 0x00}, + {R367CAB_IQDEM_ADJ_COEFF0, 0x34}, + {R367CAB_IQDEM_ADJ_COEFF1, 0xae}, + {R367CAB_IQDEM_ADJ_COEFF2, 0x46}, + {R367CAB_IQDEM_ADJ_COEFF3, 0x77}, + {R367CAB_IQDEM_ADJ_COEFF4, 0x96}, + {R367CAB_IQDEM_ADJ_COEFF5, 0x69}, + {R367CAB_IQDEM_ADJ_COEFF6, 0xc7}, + {R367CAB_IQDEM_ADJ_COEFF7, 0x01}, + {R367CAB_IQDEM_ADJ_EN, 0x04}, + {R367CAB_IQDEM_ADJ_AGC_REF, 0x94}, + {R367CAB_ALLPASSFILT1, 0xc9}, + {R367CAB_ALLPASSFILT2, 0x2d}, + {R367CAB_ALLPASSFILT3, 0xa3}, + {R367CAB_ALLPASSFILT4, 0xfb}, + {R367CAB_ALLPASSFILT5, 0xf6}, + {R367CAB_ALLPASSFILT6, 0x45}, + {R367CAB_ALLPASSFILT7, 0x6f}, + {R367CAB_ALLPASSFILT8, 0x7e}, + {R367CAB_ALLPASSFILT9, 0x05}, + {R367CAB_ALLPASSFILT10, 0x0a}, + {R367CAB_ALLPASSFILT11, 0x51}, + {R367CAB_TRL_AGC_CFG, 0x20}, + {R367CAB_TRL_LPF_CFG, 0x28}, + {R367CAB_TRL_LPF_ACQ_GAIN, 0x44}, + {R367CAB_TRL_LPF_TRK_GAIN, 0x22}, + {R367CAB_TRL_LPF_OUT_GAIN, 0x03}, + {R367CAB_TRL_LOCKDET_LTH, 0x04}, + {R367CAB_TRL_LOCKDET_HTH, 0x11}, + {R367CAB_TRL_LOCKDET_TRGVAL, 0x20}, + {R367CAB_IQ_QAM, 0x01}, + {R367CAB_FSM_STATE, 0xa0}, + {R367CAB_FSM_CTL, 0x08}, + {R367CAB_FSM_STS, 0x0c}, + {R367CAB_FSM_SNR0_HTH, 0x00}, + {R367CAB_FSM_SNR1_HTH, 0x00}, + {R367CAB_FSM_SNR2_HTH, 0x23},/* 0x00 */ + {R367CAB_FSM_SNR0_LTH, 0x00}, + {R367CAB_FSM_SNR1_LTH, 0x00}, + {R367CAB_FSM_EQA1_HTH, 0x00}, + {R367CAB_FSM_TEMPO, 0x32}, + {R367CAB_FSM_CONFIG, 0x03}, + {R367CAB_EQU_I_TESTTAP_L, 0x11}, + {R367CAB_EQU_I_TESTTAP_M, 0x00}, + {R367CAB_EQU_I_TESTTAP_H, 0x00}, + {R367CAB_EQU_TESTAP_CFG, 0x00}, + {R367CAB_EQU_Q_TESTTAP_L, 0xff}, + {R367CAB_EQU_Q_TESTTAP_M, 0x00}, + {R367CAB_EQU_Q_TESTTAP_H, 0x00}, + {R367CAB_EQU_TAP_CTRL, 0x00}, + {R367CAB_EQU_CTR_CRL_CONTROL_L, 0x11}, + {R367CAB_EQU_CTR_CRL_CONTROL_H, 0x05}, + {R367CAB_EQU_CTR_HIPOW_L, 0x00}, + {R367CAB_EQU_CTR_HIPOW_H, 0x00}, + {R367CAB_EQU_I_EQU_LO, 0xef}, + {R367CAB_EQU_I_EQU_HI, 0x00}, + {R367CAB_EQU_Q_EQU_LO, 0xee}, + {R367CAB_EQU_Q_EQU_HI, 0x00}, + {R367CAB_EQU_MAPPER, 0xc5}, + {R367CAB_EQU_SWEEP_RATE, 0x80}, + {R367CAB_EQU_SNR_LO, 0x64}, + {R367CAB_EQU_SNR_HI, 0x03}, + {R367CAB_EQU_GAMMA_LO, 0x00}, + {R367CAB_EQU_GAMMA_HI, 0x00}, + {R367CAB_EQU_ERR_GAIN, 0x36}, + {R367CAB_EQU_RADIUS, 0xaa}, + {R367CAB_EQU_FFE_MAINTAP, 0x00}, + {R367CAB_EQU_FFE_LEAKAGE, 0x63}, + {R367CAB_EQU_FFE_MAINTAP_POS, 0xdf}, + {R367CAB_EQU_GAIN_WIDE, 0x88}, + {R367CAB_EQU_GAIN_NARROW, 0x41}, + {R367CAB_EQU_CTR_LPF_GAIN, 0xd1}, + {R367CAB_EQU_CRL_LPF_GAIN, 0xa7}, + {R367CAB_EQU_GLOBAL_GAIN, 0x06}, + {R367CAB_EQU_CRL_LD_SEN, 0x85}, + {R367CAB_EQU_CRL_LD_VAL, 0xe2}, + {R367CAB_EQU_CRL_TFR, 0x20}, + {R367CAB_EQU_CRL_BISTH_LO, 0x00}, + {R367CAB_EQU_CRL_BISTH_HI, 0x00}, + {R367CAB_EQU_SWEEP_RANGE_LO, 0x00}, + {R367CAB_EQU_SWEEP_RANGE_HI, 0x00}, + {R367CAB_EQU_CRL_LIMITER, 0x40}, + {R367CAB_EQU_MODULUS_MAP, 0x90}, + {R367CAB_EQU_PNT_GAIN, 0xa7}, + {R367CAB_FEC_AC_CTR_0, 0x16}, + {R367CAB_FEC_AC_CTR_1, 0x0b}, + {R367CAB_FEC_AC_CTR_2, 0x88}, + {R367CAB_FEC_AC_CTR_3, 0x02}, + {R367CAB_FEC_STATUS, 0x12}, + {R367CAB_RS_COUNTER_0, 0x7d}, + {R367CAB_RS_COUNTER_1, 0xd0}, + {R367CAB_RS_COUNTER_2, 0x19}, + {R367CAB_RS_COUNTER_3, 0x0b}, + {R367CAB_RS_COUNTER_4, 0xa3}, + {R367CAB_RS_COUNTER_5, 0x00}, + {R367CAB_BERT_0, 0x01}, + {R367CAB_BERT_1, 0x25}, + {R367CAB_BERT_2, 0x41}, + {R367CAB_BERT_3, 0x39}, + {R367CAB_OUTFORMAT_0, 0xc2}, + {R367CAB_OUTFORMAT_1, 0x22}, + {R367CAB_SMOOTHER_2, 0x28}, + {R367CAB_TSMF_CTRL_0, 0x01}, + {R367CAB_TSMF_CTRL_1, 0xc6}, + {R367CAB_TSMF_CTRL_3, 0x43}, + {R367CAB_TS_ON_ID_0, 0x00}, + {R367CAB_TS_ON_ID_1, 0x00}, + {R367CAB_TS_ON_ID_2, 0x00}, + {R367CAB_TS_ON_ID_3, 0x00}, + {R367CAB_RE_STATUS_0, 0x00}, + {R367CAB_RE_STATUS_1, 0x00}, + {R367CAB_RE_STATUS_2, 0x00}, + {R367CAB_RE_STATUS_3, 0x00}, + {R367CAB_TS_STATUS_0, 0x00}, + {R367CAB_TS_STATUS_1, 0x00}, + {R367CAB_TS_STATUS_2, 0xa0}, + {R367CAB_TS_STATUS_3, 0x00}, + {R367CAB_T_O_ID_0, 0x00}, + {R367CAB_T_O_ID_1, 0x00}, + {R367CAB_T_O_ID_2, 0x00}, + {R367CAB_T_O_ID_3, 0x00}, +}; + +static +int stv0367_writeregs(struct stv0367_state *state, u16 reg, u8 *data, int len) +{ + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = len + 2 + }; + int ret; + + if (2 + len > sizeof(buf)) { + printk(KERN_WARNING + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + + buf[0] = MSB(reg); + buf[1] = LSB(reg); + memcpy(buf + 2, data, len); + + if (i2cdebug) + printk(KERN_DEBUG "%s: %02x: %02x\n", __func__, reg, buf[2]); + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data) +{ + return stv0367_writeregs(state, reg, &data, 1); +} + +static u8 stv0367_readreg(struct stv0367_state *state, u16 reg) +{ + u8 b0[] = { 0, 0 }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 2 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + int ret; + + b0[0] = MSB(reg); + b0[1] = LSB(reg); + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) + printk(KERN_ERR "%s: i2c read error\n", __func__); + + if (i2cdebug) + printk(KERN_DEBUG "%s: %02x: %02x\n", __func__, reg, b1[0]); + + return b1[0]; +} + +static void extract_mask_pos(u32 label, u8 *mask, u8 *pos) +{ + u8 position = 0, i = 0; + + (*mask) = label & 0xff; + + while ((position == 0) && (i < 8)) { + position = ((*mask) >> i) & 0x01; + i++; + } + + (*pos) = (i - 1); +} + +static void stv0367_writebits(struct stv0367_state *state, u32 label, u8 val) +{ + u8 reg, mask, pos; + + reg = stv0367_readreg(state, (label >> 16) & 0xffff); + extract_mask_pos(label, &mask, &pos); + + val = mask & (val << pos); + + reg = (reg & (~mask)) | val; + stv0367_writereg(state, (label >> 16) & 0xffff, reg); + +} + +static void stv0367_setbits(u8 *reg, u32 label, u8 val) +{ + u8 mask, pos; + + extract_mask_pos(label, &mask, &pos); + + val = mask & (val << pos); + + (*reg) = ((*reg) & (~mask)) | val; +} + +static u8 stv0367_readbits(struct stv0367_state *state, u32 label) +{ + u8 val = 0xff; + u8 mask, pos; + + extract_mask_pos(label, &mask, &pos); + + val = stv0367_readreg(state, label >> 16); + val = (val & mask) >> pos; + + return val; +} + +#if 0 /* Currently, unused */ +static u8 stv0367_getbits(u8 reg, u32 label) +{ + u8 mask, pos; + + extract_mask_pos(label, &mask, &pos); + + return (reg & mask) >> pos; +} +#endif +static int stv0367ter_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct stv0367_state *state = fe->demodulator_priv; + u8 tmp = stv0367_readreg(state, R367TER_I2CRPT); + + dprintk("%s:\n", __func__); + + if (enable) { + stv0367_setbits(&tmp, F367TER_STOP_ENABLE, 0); + stv0367_setbits(&tmp, F367TER_I2CT_ON, 1); + } else { + stv0367_setbits(&tmp, F367TER_STOP_ENABLE, 1); + stv0367_setbits(&tmp, F367TER_I2CT_ON, 0); + } + + stv0367_writereg(state, R367TER_I2CRPT, tmp); + + return 0; +} + +static u32 stv0367_get_tuner_freq(struct dvb_frontend *fe) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + u32 freq = 0; + int err = 0; + + dprintk("%s:\n", __func__); + + + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->get_frequency) { + err = tuner_ops->get_frequency(fe, &freq); + if (err < 0) { + printk(KERN_ERR "%s: Invalid parameter\n", __func__); + return err; + } + + dprintk("%s: frequency=%d\n", __func__, freq); + + } else + return -1; + + return freq; +} + +static u16 CellsCoeffs_8MHz_367cofdm[3][6][5] = { + { + {0x10EF, 0xE205, 0x10EF, 0xCE49, 0x6DA7}, /* CELL 1 COEFFS 27M*/ + {0x2151, 0xc557, 0x2151, 0xc705, 0x6f93}, /* CELL 2 COEFFS */ + {0x2503, 0xc000, 0x2503, 0xc375, 0x7194}, /* CELL 3 COEFFS */ + {0x20E9, 0xca94, 0x20e9, 0xc153, 0x7194}, /* CELL 4 COEFFS */ + {0x06EF, 0xF852, 0x06EF, 0xC057, 0x7207}, /* CELL 5 COEFFS */ + {0x0000, 0x0ECC, 0x0ECC, 0x0000, 0x3647} /* CELL 6 COEFFS */ + }, { + {0x10A0, 0xE2AF, 0x10A1, 0xCE76, 0x6D6D}, /* CELL 1 COEFFS 25M*/ + {0x20DC, 0xC676, 0x20D9, 0xC80A, 0x6F29}, + {0x2532, 0xC000, 0x251D, 0xC391, 0x706F}, + {0x1F7A, 0xCD2B, 0x2032, 0xC15E, 0x711F}, + {0x0698, 0xFA5E, 0x0568, 0xC059, 0x7193}, + {0x0000, 0x0918, 0x149C, 0x0000, 0x3642} /* CELL 6 COEFFS */ + }, { + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */ + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000} + } +}; + +static u16 CellsCoeffs_7MHz_367cofdm[3][6][5] = { + { + {0x12CA, 0xDDAF, 0x12CA, 0xCCEB, 0x6FB1}, /* CELL 1 COEFFS 27M*/ + {0x2329, 0xC000, 0x2329, 0xC6B0, 0x725F}, /* CELL 2 COEFFS */ + {0x2394, 0xC000, 0x2394, 0xC2C7, 0x7410}, /* CELL 3 COEFFS */ + {0x251C, 0xC000, 0x251C, 0xC103, 0x74D9}, /* CELL 4 COEFFS */ + {0x0804, 0xF546, 0x0804, 0xC040, 0x7544}, /* CELL 5 COEFFS */ + {0x0000, 0x0CD9, 0x0CD9, 0x0000, 0x370A} /* CELL 6 COEFFS */ + }, { + {0x1285, 0xDE47, 0x1285, 0xCD17, 0x6F76}, /*25M*/ + {0x234C, 0xC000, 0x2348, 0xC6DA, 0x7206}, + {0x23B4, 0xC000, 0x23AC, 0xC2DB, 0x73B3}, + {0x253D, 0xC000, 0x25B6, 0xC10B, 0x747F}, + {0x0721, 0xF79C, 0x065F, 0xC041, 0x74EB}, + {0x0000, 0x08FA, 0x1162, 0x0000, 0x36FF} + }, { + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */ + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000} + } +}; + +static u16 CellsCoeffs_6MHz_367cofdm[3][6][5] = { + { + {0x1699, 0xD5B8, 0x1699, 0xCBC3, 0x713B}, /* CELL 1 COEFFS 27M*/ + {0x2245, 0xC000, 0x2245, 0xC568, 0x74D5}, /* CELL 2 COEFFS */ + {0x227F, 0xC000, 0x227F, 0xC1FC, 0x76C6}, /* CELL 3 COEFFS */ + {0x235E, 0xC000, 0x235E, 0xC0A7, 0x778A}, /* CELL 4 COEFFS */ + {0x0ECB, 0xEA0B, 0x0ECB, 0xC027, 0x77DD}, /* CELL 5 COEFFS */ + {0x0000, 0x0B68, 0x0B68, 0x0000, 0xC89A}, /* CELL 6 COEFFS */ + }, { + {0x1655, 0xD64E, 0x1658, 0xCBEF, 0x70FE}, /*25M*/ + {0x225E, 0xC000, 0x2256, 0xC589, 0x7489}, + {0x2293, 0xC000, 0x2295, 0xC209, 0x767E}, + {0x2377, 0xC000, 0x23AA, 0xC0AB, 0x7746}, + {0x0DC7, 0xEBC8, 0x0D07, 0xC027, 0x7799}, + {0x0000, 0x0888, 0x0E9C, 0x0000, 0x3757} + + }, { + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */ + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, + {0x0000, 0x0000, 0x0000, 0x0000, 0x0000} + } +}; + +static u32 stv0367ter_get_mclk(struct stv0367_state *state, u32 ExtClk_Hz) +{ + u32 mclk_Hz = 0; /* master clock frequency (Hz) */ + u32 m, n, p; + + dprintk("%s:\n", __func__); + + if (stv0367_readbits(state, F367TER_BYPASS_PLLXN) == 0) { + n = (u32)stv0367_readbits(state, F367TER_PLL_NDIV); + if (n == 0) + n = n + 1; + + m = (u32)stv0367_readbits(state, F367TER_PLL_MDIV); + if (m == 0) + m = m + 1; + + p = (u32)stv0367_readbits(state, F367TER_PLL_PDIV); + if (p > 5) + p = 5; + + mclk_Hz = ((ExtClk_Hz / 2) * n) / (m * (1 << p)); + + dprintk("N=%d M=%d P=%d mclk_Hz=%d ExtClk_Hz=%d\n", + n, m, p, mclk_Hz, ExtClk_Hz); + } else + mclk_Hz = ExtClk_Hz; + + dprintk("%s: mclk_Hz=%d\n", __func__, mclk_Hz); + + return mclk_Hz; +} + +static int stv0367ter_filt_coeff_init(struct stv0367_state *state, + u16 CellsCoeffs[3][6][5], u32 DemodXtal) +{ + int i, j, k, freq; + + dprintk("%s:\n", __func__); + + freq = stv0367ter_get_mclk(state, DemodXtal); + + if (freq == 53125000) + k = 1; /* equivalent to Xtal 25M on 362*/ + else if (freq == 54000000) + k = 0; /* equivalent to Xtal 27M on 362*/ + else if (freq == 52500000) + k = 2; /* equivalent to Xtal 30M on 362*/ + else + return 0; + + for (i = 1; i <= 6; i++) { + stv0367_writebits(state, F367TER_IIR_CELL_NB, i - 1); + + for (j = 1; j <= 5; j++) { + stv0367_writereg(state, + (R367TER_IIRCX_COEFF1_MSB + 2 * (j - 1)), + MSB(CellsCoeffs[k][i-1][j-1])); + stv0367_writereg(state, + (R367TER_IIRCX_COEFF1_LSB + 2 * (j - 1)), + LSB(CellsCoeffs[k][i-1][j-1])); + } + } + + return 1; + +} + +static void stv0367ter_agc_iir_lock_detect_set(struct stv0367_state *state) +{ + dprintk("%s:\n", __func__); + + stv0367_writebits(state, F367TER_LOCK_DETECT_LSB, 0x00); + + /* Lock detect 1 */ + stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x00); + stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x06); + stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x04); + + /* Lock detect 2 */ + stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x01); + stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x06); + stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x04); + + /* Lock detect 3 */ + stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x02); + stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x01); + stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x00); + + /* Lock detect 4 */ + stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x03); + stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x01); + stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x00); + +} + +static int stv0367_iir_filt_init(struct stv0367_state *state, u8 Bandwidth, + u32 DemodXtalValue) +{ + dprintk("%s:\n", __func__); + + stv0367_writebits(state, F367TER_NRST_IIR, 0); + + switch (Bandwidth) { + case 6: + if (!stv0367ter_filt_coeff_init(state, + CellsCoeffs_6MHz_367cofdm, + DemodXtalValue)) + return 0; + break; + case 7: + if (!stv0367ter_filt_coeff_init(state, + CellsCoeffs_7MHz_367cofdm, + DemodXtalValue)) + return 0; + break; + case 8: + if (!stv0367ter_filt_coeff_init(state, + CellsCoeffs_8MHz_367cofdm, + DemodXtalValue)) + return 0; + break; + default: + return 0; + } + + stv0367_writebits(state, F367TER_NRST_IIR, 1); + + return 1; +} + +static void stv0367ter_agc_iir_rst(struct stv0367_state *state) +{ + + u8 com_n; + + dprintk("%s:\n", __func__); + + com_n = stv0367_readbits(state, F367TER_COM_N); + + stv0367_writebits(state, F367TER_COM_N, 0x07); + + stv0367_writebits(state, F367TER_COM_SOFT_RSTN, 0x00); + stv0367_writebits(state, F367TER_COM_AGC_ON, 0x00); + + stv0367_writebits(state, F367TER_COM_SOFT_RSTN, 0x01); + stv0367_writebits(state, F367TER_COM_AGC_ON, 0x01); + + stv0367_writebits(state, F367TER_COM_N, com_n); + +} + +static int stv0367ter_duration(s32 mode, int tempo1, int tempo2, int tempo3) +{ + int local_tempo = 0; + switch (mode) { + case 0: + local_tempo = tempo1; + break; + case 1: + local_tempo = tempo2; + break ; + + case 2: + local_tempo = tempo3; + break; + + default: + break; + } + /* msleep(local_tempo); */ + return local_tempo; +} + +static enum +stv0367_ter_signal_type stv0367ter_check_syr(struct stv0367_state *state) +{ + int wd = 100; + unsigned short int SYR_var; + s32 SYRStatus; + + dprintk("%s:\n", __func__); + + SYR_var = stv0367_readbits(state, F367TER_SYR_LOCK); + + while ((!SYR_var) && (wd > 0)) { + usleep_range(2000, 3000); + wd -= 2; + SYR_var = stv0367_readbits(state, F367TER_SYR_LOCK); + } + + if (!SYR_var) + SYRStatus = FE_TER_NOSYMBOL; + else + SYRStatus = FE_TER_SYMBOLOK; + + dprintk("stv0367ter_check_syr SYRStatus %s\n", + SYR_var == 0 ? "No Symbol" : "OK"); + + return SYRStatus; +} + +static enum +stv0367_ter_signal_type stv0367ter_check_cpamp(struct stv0367_state *state, + s32 FFTmode) +{ + + s32 CPAMPvalue = 0, CPAMPStatus, CPAMPMin; + int wd = 0; + + dprintk("%s:\n", __func__); + + switch (FFTmode) { + case 0: /*2k mode*/ + CPAMPMin = 20; + wd = 10; + break; + case 1: /*8k mode*/ + CPAMPMin = 80; + wd = 55; + break; + case 2: /*4k mode*/ + CPAMPMin = 40; + wd = 30; + break; + default: + CPAMPMin = 0xffff; /*drives to NOCPAMP */ + break; + } + + dprintk("%s: CPAMPMin=%d wd=%d\n", __func__, CPAMPMin, wd); + + CPAMPvalue = stv0367_readbits(state, F367TER_PPM_CPAMP_DIRECT); + while ((CPAMPvalue < CPAMPMin) && (wd > 0)) { + usleep_range(1000, 2000); + wd -= 1; + CPAMPvalue = stv0367_readbits(state, F367TER_PPM_CPAMP_DIRECT); + /*dprintk("CPAMPvalue= %d at wd=%d\n",CPAMPvalue,wd); */ + } + dprintk("******last CPAMPvalue= %d at wd=%d\n", CPAMPvalue, wd); + if (CPAMPvalue < CPAMPMin) { + CPAMPStatus = FE_TER_NOCPAMP; + printk(KERN_ERR "CPAMP failed\n"); + } else { + printk(KERN_ERR "CPAMP OK !\n"); + CPAMPStatus = FE_TER_CPAMPOK; + } + + return CPAMPStatus; +} + +static enum stv0367_ter_signal_type +stv0367ter_lock_algo(struct stv0367_state *state) +{ + enum stv0367_ter_signal_type ret_flag; + short int wd, tempo; + u8 try, u_var1 = 0, u_var2 = 0, u_var3 = 0, u_var4 = 0, mode, guard; + u8 tmp, tmp2; + + dprintk("%s:\n", __func__); + + if (state == NULL) + return FE_TER_SWNOK; + + try = 0; + do { + ret_flag = FE_TER_LOCKOK; + + stv0367_writebits(state, F367TER_CORE_ACTIVE, 0); + + if (state->config->if_iq_mode != 0) + stv0367_writebits(state, F367TER_COM_N, 0x07); + + stv0367_writebits(state, F367TER_GUARD, 3);/* suggest 2k 1/4 */ + stv0367_writebits(state, F367TER_MODE, 0); + stv0367_writebits(state, F367TER_SYR_TR_DIS, 0); + usleep_range(5000, 10000); + + stv0367_writebits(state, F367TER_CORE_ACTIVE, 1); + + + if (stv0367ter_check_syr(state) == FE_TER_NOSYMBOL) + return FE_TER_NOSYMBOL; + else { /* + if chip locked on wrong mode first try, + it must lock correctly second try */ + mode = stv0367_readbits(state, F367TER_SYR_MODE); + if (stv0367ter_check_cpamp(state, mode) == + FE_TER_NOCPAMP) { + if (try == 0) + ret_flag = FE_TER_NOCPAMP; + + } + } + + try++; + } while ((try < 10) && (ret_flag != FE_TER_LOCKOK)); + + tmp = stv0367_readreg(state, R367TER_SYR_STAT); + tmp2 = stv0367_readreg(state, R367TER_STATUS); + dprintk("state=%p\n", state); + dprintk("LOCK OK! mode=%d SYR_STAT=0x%x R367TER_STATUS=0x%x\n", + mode, tmp, tmp2); + + tmp = stv0367_readreg(state, R367TER_PRVIT); + tmp2 = stv0367_readreg(state, R367TER_I2CRPT); + dprintk("PRVIT=0x%x I2CRPT=0x%x\n", tmp, tmp2); + + tmp = stv0367_readreg(state, R367TER_GAIN_SRC1); + dprintk("GAIN_SRC1=0x%x\n", tmp); + + if ((mode != 0) && (mode != 1) && (mode != 2)) + return FE_TER_SWNOK; + + /*guard=stv0367_readbits(state,F367TER_SYR_GUARD); */ + + /*suppress EPQ auto for SYR_GARD 1/16 or 1/32 + and set channel predictor in automatic */ +#if 0 + switch (guard) { + + case 0: + case 1: + stv0367_writebits(state, F367TER_AUTO_LE_EN, 0); + stv0367_writereg(state, R367TER_CHC_CTL, 0x01); + break; + case 2: + case 3: + stv0367_writebits(state, F367TER_AUTO_LE_EN, 1); + stv0367_writereg(state, R367TER_CHC_CTL, 0x11); + break; + + default: + return FE_TER_SWNOK; + } +#endif + + /*reset fec an reedsolo FOR 367 only*/ + stv0367_writebits(state, F367TER_RST_SFEC, 1); + stv0367_writebits(state, F367TER_RST_REEDSOLO, 1); + usleep_range(1000, 2000); + stv0367_writebits(state, F367TER_RST_SFEC, 0); + stv0367_writebits(state, F367TER_RST_REEDSOLO, 0); + + u_var1 = stv0367_readbits(state, F367TER_LK); + u_var2 = stv0367_readbits(state, F367TER_PRF); + u_var3 = stv0367_readbits(state, F367TER_TPS_LOCK); + /* u_var4=stv0367_readbits(state,F367TER_TSFIFO_LINEOK); */ + + wd = stv0367ter_duration(mode, 125, 500, 250); + tempo = stv0367ter_duration(mode, 4, 16, 8); + + /*while ( ((!u_var1)||(!u_var2)||(!u_var3)||(!u_var4)) && (wd>=0)) */ + while (((!u_var1) || (!u_var2) || (!u_var3)) && (wd >= 0)) { + usleep_range(1000 * tempo, 1000 * (tempo + 1)); + wd -= tempo; + u_var1 = stv0367_readbits(state, F367TER_LK); + u_var2 = stv0367_readbits(state, F367TER_PRF); + u_var3 = stv0367_readbits(state, F367TER_TPS_LOCK); + /*u_var4=stv0367_readbits(state, F367TER_TSFIFO_LINEOK); */ + } + + if (!u_var1) + return FE_TER_NOLOCK; + + + if (!u_var2) + return FE_TER_NOPRFOUND; + + if (!u_var3) + return FE_TER_NOTPS; + + guard = stv0367_readbits(state, F367TER_SYR_GUARD); + stv0367_writereg(state, R367TER_CHC_CTL, 0x11); + switch (guard) { + case 0: + case 1: + stv0367_writebits(state, F367TER_AUTO_LE_EN, 0); + /*stv0367_writereg(state,R367TER_CHC_CTL, 0x1);*/ + stv0367_writebits(state, F367TER_SYR_FILTER, 0); + break; + case 2: + case 3: + stv0367_writebits(state, F367TER_AUTO_LE_EN, 1); + /*stv0367_writereg(state,R367TER_CHC_CTL, 0x11);*/ + stv0367_writebits(state, F367TER_SYR_FILTER, 1); + break; + + default: + return FE_TER_SWNOK; + } + + /* apply Sfec workaround if 8K 64QAM CR!=1/2*/ + if ((stv0367_readbits(state, F367TER_TPS_CONST) == 2) && + (mode == 1) && + (stv0367_readbits(state, F367TER_TPS_HPCODE) != 0)) { + stv0367_writereg(state, R367TER_SFDLYSETH, 0xc0); + stv0367_writereg(state, R367TER_SFDLYSETM, 0x60); + stv0367_writereg(state, R367TER_SFDLYSETL, 0x0); + } else + stv0367_writereg(state, R367TER_SFDLYSETH, 0x0); + + wd = stv0367ter_duration(mode, 125, 500, 250); + u_var4 = stv0367_readbits(state, F367TER_TSFIFO_LINEOK); + + while ((!u_var4) && (wd >= 0)) { + usleep_range(1000 * tempo, 1000 * (tempo + 1)); + wd -= tempo; + u_var4 = stv0367_readbits(state, F367TER_TSFIFO_LINEOK); + } + + if (!u_var4) + return FE_TER_NOLOCK; + + /* for 367 leave COM_N at 0x7 for IQ_mode*/ + /*if(ter_state->if_iq_mode!=FE_TER_NORMAL_IF_TUNER) { + tempo=0; + while ((stv0367_readbits(state,F367TER_COM_USEGAINTRK)!=1) && + (stv0367_readbits(state,F367TER_COM_AGCLOCK)!=1)&&(tempo<100)) { + ChipWaitOrAbort(state,1); + tempo+=1; + } + + stv0367_writebits(state,F367TER_COM_N,0x17); + } */ + + stv0367_writebits(state, F367TER_SYR_TR_DIS, 1); + + dprintk("FE_TER_LOCKOK !!!\n"); + + return FE_TER_LOCKOK; + +} + +static void stv0367ter_set_ts_mode(struct stv0367_state *state, + enum stv0367_ts_mode PathTS) +{ + + dprintk("%s:\n", __func__); + + if (state == NULL) + return; + + stv0367_writebits(state, F367TER_TS_DIS, 0); + switch (PathTS) { + default: + /*for removing warning :default we can assume in parallel mode*/ + case STV0367_PARALLEL_PUNCT_CLOCK: + stv0367_writebits(state, F367TER_TSFIFO_SERIAL, 0); + stv0367_writebits(state, F367TER_TSFIFO_DVBCI, 0); + break; + case STV0367_SERIAL_PUNCT_CLOCK: + stv0367_writebits(state, F367TER_TSFIFO_SERIAL, 1); + stv0367_writebits(state, F367TER_TSFIFO_DVBCI, 1); + break; + } +} + +static void stv0367ter_set_clk_pol(struct stv0367_state *state, + enum stv0367_clk_pol clock) +{ + + dprintk("%s:\n", __func__); + + if (state == NULL) + return; + + switch (clock) { + case STV0367_RISINGEDGE_CLOCK: + stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 1); + break; + case STV0367_FALLINGEDGE_CLOCK: + stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 0); + break; + /*case FE_TER_CLOCK_POLARITY_DEFAULT:*/ + default: + stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 0); + break; + } +} + +#if 0 +static void stv0367ter_core_sw(struct stv0367_state *state) +{ + + dprintk("%s:\n", __func__); + + stv0367_writebits(state, F367TER_CORE_ACTIVE, 0); + stv0367_writebits(state, F367TER_CORE_ACTIVE, 1); + msleep(350); +} +#endif +static int stv0367ter_standby(struct dvb_frontend *fe, u8 standby_on) +{ + struct stv0367_state *state = fe->demodulator_priv; + + dprintk("%s:\n", __func__); + + if (standby_on) { + stv0367_writebits(state, F367TER_STDBY, 1); + stv0367_writebits(state, F367TER_STDBY_FEC, 1); + stv0367_writebits(state, F367TER_STDBY_CORE, 1); + } else { + stv0367_writebits(state, F367TER_STDBY, 0); + stv0367_writebits(state, F367TER_STDBY_FEC, 0); + stv0367_writebits(state, F367TER_STDBY_CORE, 0); + } + + return 0; +} + +static int stv0367ter_sleep(struct dvb_frontend *fe) +{ + return stv0367ter_standby(fe, 1); +} + +static int stv0367ter_init(struct dvb_frontend *fe) +{ + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367ter_state *ter_state = state->ter_state; + int i; + + dprintk("%s:\n", __func__); + + ter_state->pBER = 0; + + for (i = 0; i < STV0367TER_NBREGS; i++) + stv0367_writereg(state, def0367ter[i].addr, + def0367ter[i].value); + + switch (state->config->xtal) { + /*set internal freq to 53.125MHz */ + case 25000000: + stv0367_writereg(state, R367TER_PLLMDIV, 0xa); + stv0367_writereg(state, R367TER_PLLNDIV, 0x55); + stv0367_writereg(state, R367TER_PLLSETUP, 0x18); + break; + default: + case 27000000: + dprintk("FE_STV0367TER_SetCLKgen for 27Mhz\n"); + stv0367_writereg(state, R367TER_PLLMDIV, 0x1); + stv0367_writereg(state, R367TER_PLLNDIV, 0x8); + stv0367_writereg(state, R367TER_PLLSETUP, 0x18); + break; + case 30000000: + stv0367_writereg(state, R367TER_PLLMDIV, 0xc); + stv0367_writereg(state, R367TER_PLLNDIV, 0x55); + stv0367_writereg(state, R367TER_PLLSETUP, 0x18); + break; + } + + stv0367_writereg(state, R367TER_I2CRPT, 0xa0); + stv0367_writereg(state, R367TER_ANACTRL, 0x00); + + /*Set TS1 and TS2 to serial or parallel mode */ + stv0367ter_set_ts_mode(state, state->config->ts_mode); + stv0367ter_set_clk_pol(state, state->config->clk_pol); + + state->chip_id = stv0367_readreg(state, R367TER_ID); + ter_state->first_lock = 0; + ter_state->unlock_counter = 2; + + return 0; +} + +static int stv0367ter_algo(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367ter_state *ter_state = state->ter_state; + int offset = 0, tempo = 0; + u8 u_var; + u8 /*constell,*/ counter; + s8 step; + s32 timing_offset = 0; + u32 trl_nomrate = 0, InternalFreq = 0, temp = 0; + + dprintk("%s:\n", __func__); + + ter_state->frequency = p->frequency; + ter_state->force = FE_TER_FORCENONE + + stv0367_readbits(state, F367TER_FORCE) * 2; + ter_state->if_iq_mode = state->config->if_iq_mode; + switch (state->config->if_iq_mode) { + case FE_TER_NORMAL_IF_TUNER: /* Normal IF mode */ + dprintk("ALGO: FE_TER_NORMAL_IF_TUNER selected\n"); + stv0367_writebits(state, F367TER_TUNER_BB, 0); + stv0367_writebits(state, F367TER_LONGPATH_IF, 0); + stv0367_writebits(state, F367TER_DEMUX_SWAP, 0); + break; + case FE_TER_LONGPATH_IF_TUNER: /* Long IF mode */ + dprintk("ALGO: FE_TER_LONGPATH_IF_TUNER selected\n"); + stv0367_writebits(state, F367TER_TUNER_BB, 0); + stv0367_writebits(state, F367TER_LONGPATH_IF, 1); + stv0367_writebits(state, F367TER_DEMUX_SWAP, 1); + break; + case FE_TER_IQ_TUNER: /* IQ mode */ + dprintk("ALGO: FE_TER_IQ_TUNER selected\n"); + stv0367_writebits(state, F367TER_TUNER_BB, 1); + stv0367_writebits(state, F367TER_PPM_INVSEL, 0); + break; + default: + printk(KERN_ERR "ALGO: wrong TUNER type selected\n"); + return -EINVAL; + } + + usleep_range(5000, 7000); + + switch (p->inversion) { + case INVERSION_AUTO: + default: + dprintk("%s: inversion AUTO\n", __func__); + if (ter_state->if_iq_mode == FE_TER_IQ_TUNER) + stv0367_writebits(state, F367TER_IQ_INVERT, + ter_state->sense); + else + stv0367_writebits(state, F367TER_INV_SPECTR, + ter_state->sense); + + break; + case INVERSION_ON: + case INVERSION_OFF: + if (ter_state->if_iq_mode == FE_TER_IQ_TUNER) + stv0367_writebits(state, F367TER_IQ_INVERT, + p->inversion); + else + stv0367_writebits(state, F367TER_INV_SPECTR, + p->inversion); + + break; + } + + if ((ter_state->if_iq_mode != FE_TER_NORMAL_IF_TUNER) && + (ter_state->pBW != ter_state->bw)) { + stv0367ter_agc_iir_lock_detect_set(state); + + /*set fine agc target to 180 for LPIF or IQ mode*/ + /* set Q_AGCTarget */ + stv0367_writebits(state, F367TER_SEL_IQNTAR, 1); + stv0367_writebits(state, F367TER_AUT_AGC_TARGET_MSB, 0xB); + /*stv0367_writebits(state,AUT_AGC_TARGET_LSB,0x04); */ + + /* set Q_AGCTarget */ + stv0367_writebits(state, F367TER_SEL_IQNTAR, 0); + stv0367_writebits(state, F367TER_AUT_AGC_TARGET_MSB, 0xB); + /*stv0367_writebits(state,AUT_AGC_TARGET_LSB,0x04); */ + + if (!stv0367_iir_filt_init(state, ter_state->bw, + state->config->xtal)) + return -EINVAL; + /*set IIR filter once for 6,7 or 8MHz BW*/ + ter_state->pBW = ter_state->bw; + + stv0367ter_agc_iir_rst(state); + } + + if (ter_state->hierarchy == FE_TER_HIER_LOW_PRIO) + stv0367_writebits(state, F367TER_BDI_LPSEL, 0x01); + else + stv0367_writebits(state, F367TER_BDI_LPSEL, 0x00); + + InternalFreq = stv0367ter_get_mclk(state, state->config->xtal) / 1000; + temp = (int) + ((((ter_state->bw * 64 * (1 << 15) * 100) + / (InternalFreq)) * 10) / 7); + + stv0367_writebits(state, F367TER_TRL_NOMRATE_LSB, temp % 2); + temp = temp / 2; + stv0367_writebits(state, F367TER_TRL_NOMRATE_HI, temp / 256); + stv0367_writebits(state, F367TER_TRL_NOMRATE_LO, temp % 256); + + temp = stv0367_readbits(state, F367TER_TRL_NOMRATE_HI) * 512 + + stv0367_readbits(state, F367TER_TRL_NOMRATE_LO) * 2 + + stv0367_readbits(state, F367TER_TRL_NOMRATE_LSB); + temp = (int)(((1 << 17) * ter_state->bw * 1000) / (7 * (InternalFreq))); + stv0367_writebits(state, F367TER_GAIN_SRC_HI, temp / 256); + stv0367_writebits(state, F367TER_GAIN_SRC_LO, temp % 256); + temp = stv0367_readbits(state, F367TER_GAIN_SRC_HI) * 256 + + stv0367_readbits(state, F367TER_GAIN_SRC_LO); + + temp = (int) + ((InternalFreq - state->config->if_khz) * (1 << 16) + / (InternalFreq)); + + dprintk("DEROT temp=0x%x\n", temp); + stv0367_writebits(state, F367TER_INC_DEROT_HI, temp / 256); + stv0367_writebits(state, F367TER_INC_DEROT_LO, temp % 256); + + ter_state->echo_pos = 0; + ter_state->ucblocks = 0; /* liplianin */ + ter_state->pBER = 0; /* liplianin */ + stv0367_writebits(state, F367TER_LONG_ECHO, ter_state->echo_pos); + + if (stv0367ter_lock_algo(state) != FE_TER_LOCKOK) + return 0; + + ter_state->state = FE_TER_LOCKOK; + + ter_state->mode = stv0367_readbits(state, F367TER_SYR_MODE); + ter_state->guard = stv0367_readbits(state, F367TER_SYR_GUARD); + + ter_state->first_lock = 1; /* we know sense now :) */ + + ter_state->agc_val = + (stv0367_readbits(state, F367TER_AGC1_VAL_LO) << 16) + + (stv0367_readbits(state, F367TER_AGC1_VAL_HI) << 24) + + stv0367_readbits(state, F367TER_AGC2_VAL_LO) + + (stv0367_readbits(state, F367TER_AGC2_VAL_HI) << 8); + + /* Carrier offset calculation */ + stv0367_writebits(state, F367TER_FREEZE, 1); + offset = (stv0367_readbits(state, F367TER_CRL_FOFFSET_VHI) << 16) ; + offset += (stv0367_readbits(state, F367TER_CRL_FOFFSET_HI) << 8); + offset += (stv0367_readbits(state, F367TER_CRL_FOFFSET_LO)); + stv0367_writebits(state, F367TER_FREEZE, 0); + if (offset > 8388607) + offset -= 16777216; + + offset = offset * 2 / 16384; + + if (ter_state->mode == FE_TER_MODE_2K) + offset = (offset * 4464) / 1000;/*** 1 FFT BIN=4.464khz***/ + else if (ter_state->mode == FE_TER_MODE_4K) + offset = (offset * 223) / 100;/*** 1 FFT BIN=2.23khz***/ + else if (ter_state->mode == FE_TER_MODE_8K) + offset = (offset * 111) / 100;/*** 1 FFT BIN=1.1khz***/ + + if (stv0367_readbits(state, F367TER_PPM_INVSEL) == 1) { + if ((stv0367_readbits(state, F367TER_INV_SPECTR) == + (stv0367_readbits(state, + F367TER_STATUS_INV_SPECRUM) == 1))) + offset = offset * -1; + } + + if (ter_state->bw == 6) + offset = (offset * 6) / 8; + else if (ter_state->bw == 7) + offset = (offset * 7) / 8; + + ter_state->frequency += offset; + + tempo = 10; /* exit even if timing_offset stays null */ + while ((timing_offset == 0) && (tempo > 0)) { + usleep_range(10000, 20000); /*was 20ms */ + /* fine tuning of timing offset if required */ + timing_offset = stv0367_readbits(state, F367TER_TRL_TOFFSET_LO) + + 256 * stv0367_readbits(state, + F367TER_TRL_TOFFSET_HI); + if (timing_offset >= 32768) + timing_offset -= 65536; + trl_nomrate = (512 * stv0367_readbits(state, + F367TER_TRL_NOMRATE_HI) + + stv0367_readbits(state, F367TER_TRL_NOMRATE_LO) * 2 + + stv0367_readbits(state, F367TER_TRL_NOMRATE_LSB)); + + timing_offset = ((signed)(1000000 / trl_nomrate) * + timing_offset) / 2048; + tempo--; + } + + if (timing_offset <= 0) { + timing_offset = (timing_offset - 11) / 22; + step = -1; + } else { + timing_offset = (timing_offset + 11) / 22; + step = 1; + } + + for (counter = 0; counter < abs(timing_offset); counter++) { + trl_nomrate += step; + stv0367_writebits(state, F367TER_TRL_NOMRATE_LSB, + trl_nomrate % 2); + stv0367_writebits(state, F367TER_TRL_NOMRATE_LO, + trl_nomrate / 2); + usleep_range(1000, 2000); + } + + usleep_range(5000, 6000); + /* unlocks could happen in case of trl centring big step, + then a core off/on restarts demod */ + u_var = stv0367_readbits(state, F367TER_LK); + + if (!u_var) { + stv0367_writebits(state, F367TER_CORE_ACTIVE, 0); + msleep(20); + stv0367_writebits(state, F367TER_CORE_ACTIVE, 1); + } + + return 0; +} + +static int stv0367ter_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367ter_state *ter_state = state->ter_state; + + /*u8 trials[2]; */ + s8 num_trials, index; + u8 SenseTrials[] = { INVERSION_ON, INVERSION_OFF }; + + stv0367ter_init(fe); + + if (fe->ops.tuner_ops.set_params) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + switch (p->transmission_mode) { + default: + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_2K: + ter_state->mode = FE_TER_MODE_2K; + break; +/* case TRANSMISSION_MODE_4K: + pLook.mode = FE_TER_MODE_4K; + break;*/ + case TRANSMISSION_MODE_8K: + ter_state->mode = FE_TER_MODE_8K; + break; + } + + switch (p->guard_interval) { + default: + case GUARD_INTERVAL_1_32: + case GUARD_INTERVAL_1_16: + case GUARD_INTERVAL_1_8: + case GUARD_INTERVAL_1_4: + ter_state->guard = p->guard_interval; + break; + case GUARD_INTERVAL_AUTO: + ter_state->guard = GUARD_INTERVAL_1_32; + break; + } + + switch (p->bandwidth_hz) { + case 6000000: + ter_state->bw = FE_TER_CHAN_BW_6M; + break; + case 7000000: + ter_state->bw = FE_TER_CHAN_BW_7M; + break; + case 8000000: + default: + ter_state->bw = FE_TER_CHAN_BW_8M; + } + + ter_state->hierarchy = FE_TER_HIER_NONE; + + switch (p->inversion) { + case INVERSION_OFF: + case INVERSION_ON: + num_trials = 1; + break; + default: + num_trials = 2; + if (ter_state->first_lock) + num_trials = 1; + break; + } + + ter_state->state = FE_TER_NOLOCK; + index = 0; + + while (((index) < num_trials) && (ter_state->state != FE_TER_LOCKOK)) { + if (!ter_state->first_lock) { + if (p->inversion == INVERSION_AUTO) + ter_state->sense = SenseTrials[index]; + + } + stv0367ter_algo(fe); + + if ((ter_state->state == FE_TER_LOCKOK) && + (p->inversion == INVERSION_AUTO) && + (index == 1)) { + /* invert spectrum sense */ + SenseTrials[index] = SenseTrials[0]; + SenseTrials[(index + 1) % 2] = (SenseTrials[1] + 1) % 2; + } + + index++; + } + + return 0; +} + +static int stv0367ter_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367ter_state *ter_state = state->ter_state; + u32 errs = 0; + + /*wait for counting completion*/ + if (stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 0) { + errs = + ((u32)stv0367_readbits(state, F367TER_ERR_CNT1) + * (1 << 16)) + + ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_HI) + * (1 << 8)) + + ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_LO)); + ter_state->ucblocks = errs; + } + + (*ucblocks) = ter_state->ucblocks; + + return 0; +} + +static int stv0367ter_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367ter_state *ter_state = state->ter_state; + + int error = 0; + enum stv0367_ter_mode mode; + int constell = 0,/* snr = 0,*/ Data = 0; + + p->frequency = stv0367_get_tuner_freq(fe); + if ((int)p->frequency < 0) + p->frequency = -p->frequency; + + constell = stv0367_readbits(state, F367TER_TPS_CONST); + if (constell == 0) + p->modulation = QPSK; + else if (constell == 1) + p->modulation = QAM_16; + else + p->modulation = QAM_64; + + p->inversion = stv0367_readbits(state, F367TER_INV_SPECTR); + + /* Get the Hierarchical mode */ + Data = stv0367_readbits(state, F367TER_TPS_HIERMODE); + + switch (Data) { + case 0: + p->hierarchy = HIERARCHY_NONE; + break; + case 1: + p->hierarchy = HIERARCHY_1; + break; + case 2: + p->hierarchy = HIERARCHY_2; + break; + case 3: + p->hierarchy = HIERARCHY_4; + break; + default: + p->hierarchy = HIERARCHY_AUTO; + break; /* error */ + } + + /* Get the FEC Rate */ + if (ter_state->hierarchy == FE_TER_HIER_LOW_PRIO) + Data = stv0367_readbits(state, F367TER_TPS_LPCODE); + else + Data = stv0367_readbits(state, F367TER_TPS_HPCODE); + + switch (Data) { + case 0: + p->code_rate_HP = FEC_1_2; + break; + case 1: + p->code_rate_HP = FEC_2_3; + break; + case 2: + p->code_rate_HP = FEC_3_4; + break; + case 3: + p->code_rate_HP = FEC_5_6; + break; + case 4: + p->code_rate_HP = FEC_7_8; + break; + default: + p->code_rate_HP = FEC_AUTO; + break; /* error */ + } + + mode = stv0367_readbits(state, F367TER_SYR_MODE); + + switch (mode) { + case FE_TER_MODE_2K: + p->transmission_mode = TRANSMISSION_MODE_2K; + break; +/* case FE_TER_MODE_4K: + p->transmission_mode = TRANSMISSION_MODE_4K; + break;*/ + case FE_TER_MODE_8K: + p->transmission_mode = TRANSMISSION_MODE_8K; + break; + default: + p->transmission_mode = TRANSMISSION_MODE_AUTO; + } + + p->guard_interval = stv0367_readbits(state, F367TER_SYR_GUARD); + + return error; +} + +static int stv0367ter_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct stv0367_state *state = fe->demodulator_priv; + u32 snru32 = 0; + int cpt = 0; + u8 cut = stv0367_readbits(state, F367TER_IDENTIFICATIONREG); + + while (cpt < 10) { + usleep_range(2000, 3000); + if (cut == 0x50) /*cut 1.0 cut 1.1*/ + snru32 += stv0367_readbits(state, F367TER_CHCSNR) / 4; + else /*cu2.0*/ + snru32 += 125 * stv0367_readbits(state, F367TER_CHCSNR); + + cpt++; + } + + snru32 /= 10;/*average on 10 values*/ + + *snr = snru32 / 1000; + + return 0; +} + +#if 0 +static int stv0367ter_status(struct dvb_frontend *fe) +{ + + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367ter_state *ter_state = state->ter_state; + int locked = FALSE; + + locked = (stv0367_readbits(state, F367TER_LK)); + if (!locked) + ter_state->unlock_counter += 1; + else + ter_state->unlock_counter = 0; + + if (ter_state->unlock_counter > 2) { + if (!stv0367_readbits(state, F367TER_TPS_LOCK) || + (!stv0367_readbits(state, F367TER_LK))) { + stv0367_writebits(state, F367TER_CORE_ACTIVE, 0); + usleep_range(2000, 3000); + stv0367_writebits(state, F367TER_CORE_ACTIVE, 1); + msleep(350); + locked = (stv0367_readbits(state, F367TER_TPS_LOCK)) && + (stv0367_readbits(state, F367TER_LK)); + } + + } + + return locked; +} +#endif +static int stv0367ter_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct stv0367_state *state = fe->demodulator_priv; + + dprintk("%s:\n", __func__); + + *status = 0; + + if (stv0367_readbits(state, F367TER_LK)) { + *status |= FE_HAS_LOCK; + dprintk("%s: stv0367 has locked\n", __func__); + } + + return 0; +} + +static int stv0367ter_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367ter_state *ter_state = state->ter_state; + u32 Errors = 0, tber = 0, temporary = 0; + int abc = 0, def = 0; + + + /*wait for counting completion*/ + if (stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 0) + Errors = ((u32)stv0367_readbits(state, F367TER_SFEC_ERR_CNT) + * (1 << 16)) + + ((u32)stv0367_readbits(state, F367TER_SFEC_ERR_CNT_HI) + * (1 << 8)) + + ((u32)stv0367_readbits(state, + F367TER_SFEC_ERR_CNT_LO)); + /*measurement not completed, load previous value*/ + else { + tber = ter_state->pBER; + return 0; + } + + abc = stv0367_readbits(state, F367TER_SFEC_ERR_SOURCE); + def = stv0367_readbits(state, F367TER_SFEC_NUM_EVENT); + + if (Errors == 0) { + tber = 0; + } else if (abc == 0x7) { + if (Errors <= 4) { + temporary = (Errors * 1000000000) / (8 * (1 << 14)); + temporary = temporary; + } else if (Errors <= 42) { + temporary = (Errors * 100000000) / (8 * (1 << 14)); + temporary = temporary * 10; + } else if (Errors <= 429) { + temporary = (Errors * 10000000) / (8 * (1 << 14)); + temporary = temporary * 100; + } else if (Errors <= 4294) { + temporary = (Errors * 1000000) / (8 * (1 << 14)); + temporary = temporary * 1000; + } else if (Errors <= 42949) { + temporary = (Errors * 100000) / (8 * (1 << 14)); + temporary = temporary * 10000; + } else if (Errors <= 429496) { + temporary = (Errors * 10000) / (8 * (1 << 14)); + temporary = temporary * 100000; + } else { /*if (Errors<4294967) 2^22 max error*/ + temporary = (Errors * 1000) / (8 * (1 << 14)); + temporary = temporary * 100000; /* still to *10 */ + } + + /* Byte error*/ + if (def == 2) + /*tber=Errors/(8*(1 <<14));*/ + tber = temporary; + else if (def == 3) + /*tber=Errors/(8*(1 <<16));*/ + tber = temporary / 4; + else if (def == 4) + /*tber=Errors/(8*(1 <<18));*/ + tber = temporary / 16; + else if (def == 5) + /*tber=Errors/(8*(1 <<20));*/ + tber = temporary / 64; + else if (def == 6) + /*tber=Errors/(8*(1 <<22));*/ + tber = temporary / 256; + else + /* should not pass here*/ + tber = 0; + + if ((Errors < 4294967) && (Errors > 429496)) + tber *= 10; + + } + + /* save actual value */ + ter_state->pBER = tber; + + (*ber) = tber; + + return 0; +} +#if 0 +static u32 stv0367ter_get_per(struct stv0367_state *state) +{ + struct stv0367ter_state *ter_state = state->ter_state; + u32 Errors = 0, Per = 0, temporary = 0; + int abc = 0, def = 0, cpt = 0; + + while (((stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 1) && + (cpt < 400)) || ((Errors == 0) && (cpt < 400))) { + usleep_range(1000, 2000); + Errors = ((u32)stv0367_readbits(state, F367TER_ERR_CNT1) + * (1 << 16)) + + ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_HI) + * (1 << 8)) + + ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_LO)); + cpt++; + } + abc = stv0367_readbits(state, F367TER_ERR_SRC1); + def = stv0367_readbits(state, F367TER_NUM_EVT1); + + if (Errors == 0) + Per = 0; + else if (abc == 0x9) { + if (Errors <= 4) { + temporary = (Errors * 1000000000) / (8 * (1 << 8)); + temporary = temporary; + } else if (Errors <= 42) { + temporary = (Errors * 100000000) / (8 * (1 << 8)); + temporary = temporary * 10; + } else if (Errors <= 429) { + temporary = (Errors * 10000000) / (8 * (1 << 8)); + temporary = temporary * 100; + } else if (Errors <= 4294) { + temporary = (Errors * 1000000) / (8 * (1 << 8)); + temporary = temporary * 1000; + } else if (Errors <= 42949) { + temporary = (Errors * 100000) / (8 * (1 << 8)); + temporary = temporary * 10000; + } else { /*if(Errors<=429496) 2^16 errors max*/ + temporary = (Errors * 10000) / (8 * (1 << 8)); + temporary = temporary * 100000; + } + + /* pkt error*/ + if (def == 2) + /*Per=Errors/(1 << 8);*/ + Per = temporary; + else if (def == 3) + /*Per=Errors/(1 << 10);*/ + Per = temporary / 4; + else if (def == 4) + /*Per=Errors/(1 << 12);*/ + Per = temporary / 16; + else if (def == 5) + /*Per=Errors/(1 << 14);*/ + Per = temporary / 64; + else if (def == 6) + /*Per=Errors/(1 << 16);*/ + Per = temporary / 256; + else + Per = 0; + + } + /* save actual value */ + ter_state->pPER = Per; + + return Per; +} +#endif +static int stv0367_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings + *fe_tune_settings) +{ + fe_tune_settings->min_delay_ms = 1000; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + + return 0; +} + +static void stv0367_release(struct dvb_frontend *fe) +{ + struct stv0367_state *state = fe->demodulator_priv; + + kfree(state->ter_state); + kfree(state->cab_state); + kfree(state); +} + +static struct dvb_frontend_ops stv0367ter_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "ST STV0367 DVB-T", + .frequency_min = 47000000, + .frequency_max = 862000000, + .frequency_stepsize = 15625, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER | + FE_CAN_INVERSION_AUTO | + FE_CAN_MUTE_TS + }, + .release = stv0367_release, + .init = stv0367ter_init, + .sleep = stv0367ter_sleep, + .i2c_gate_ctrl = stv0367ter_gate_ctrl, + .set_frontend = stv0367ter_set_frontend, + .get_frontend = stv0367ter_get_frontend, + .get_tune_settings = stv0367_get_tune_settings, + .read_status = stv0367ter_read_status, + .read_ber = stv0367ter_read_ber,/* too slow */ +/* .read_signal_strength = stv0367_read_signal_strength,*/ + .read_snr = stv0367ter_read_snr, + .read_ucblocks = stv0367ter_read_ucblocks, +}; + +struct dvb_frontend *stv0367ter_attach(const struct stv0367_config *config, + struct i2c_adapter *i2c) +{ + struct stv0367_state *state = NULL; + struct stv0367ter_state *ter_state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct stv0367_state), GFP_KERNEL); + if (state == NULL) + goto error; + ter_state = kzalloc(sizeof(struct stv0367ter_state), GFP_KERNEL); + if (ter_state == NULL) + goto error; + + /* setup the state */ + state->i2c = i2c; + state->config = config; + state->ter_state = ter_state; + state->fe.ops = stv0367ter_ops; + state->fe.demodulator_priv = state; + state->chip_id = stv0367_readreg(state, 0xf000); + + dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id); + + /* check if the demod is there */ + if ((state->chip_id != 0x50) && (state->chip_id != 0x60)) + goto error; + + return &state->fe; + +error: + kfree(ter_state); + kfree(state); + return NULL; +} +EXPORT_SYMBOL(stv0367ter_attach); + +static int stv0367cab_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct stv0367_state *state = fe->demodulator_priv; + + dprintk("%s:\n", __func__); + + stv0367_writebits(state, F367CAB_I2CT_ON, (enable > 0) ? 1 : 0); + + return 0; +} + +static u32 stv0367cab_get_mclk(struct dvb_frontend *fe, u32 ExtClk_Hz) +{ + struct stv0367_state *state = fe->demodulator_priv; + u32 mclk_Hz = 0;/* master clock frequency (Hz) */ + u32 M, N, P; + + + if (stv0367_readbits(state, F367CAB_BYPASS_PLLXN) == 0) { + N = (u32)stv0367_readbits(state, F367CAB_PLL_NDIV); + if (N == 0) + N = N + 1; + + M = (u32)stv0367_readbits(state, F367CAB_PLL_MDIV); + if (M == 0) + M = M + 1; + + P = (u32)stv0367_readbits(state, F367CAB_PLL_PDIV); + + if (P > 5) + P = 5; + + mclk_Hz = ((ExtClk_Hz / 2) * N) / (M * (1 << P)); + dprintk("stv0367cab_get_mclk BYPASS_PLLXN mclk_Hz=%d\n", + mclk_Hz); + } else + mclk_Hz = ExtClk_Hz; + + dprintk("stv0367cab_get_mclk final mclk_Hz=%d\n", mclk_Hz); + + return mclk_Hz; +} + +static u32 stv0367cab_get_adc_freq(struct dvb_frontend *fe, u32 ExtClk_Hz) +{ + u32 ADCClk_Hz = ExtClk_Hz; + + ADCClk_Hz = stv0367cab_get_mclk(fe, ExtClk_Hz); + + return ADCClk_Hz; +} + +static enum stv0367cab_mod stv0367cab_SetQamSize(struct stv0367_state *state, + u32 SymbolRate, + enum stv0367cab_mod QAMSize) +{ + /* Set QAM size */ + stv0367_writebits(state, F367CAB_QAM_MODE, QAMSize); + + /* Set Registers settings specific to the QAM size */ + switch (QAMSize) { + case FE_CAB_MOD_QAM4: + stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00); + break; + case FE_CAB_MOD_QAM16: + stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x64); + stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00); + stv0367_writereg(state, R367CAB_FSM_STATE, 0x90); + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1); + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7); + stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x95); + stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40); + stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0x8a); + break; + case FE_CAB_MOD_QAM32: + stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00); + stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x6e); + stv0367_writereg(state, R367CAB_FSM_STATE, 0xb0); + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1); + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xb7); + stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x9d); + stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x7f); + stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7); + break; + case FE_CAB_MOD_QAM64: + stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x82); + stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x5a); + if (SymbolRate > 45000000) { + stv0367_writereg(state, R367CAB_FSM_STATE, 0xb0); + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1); + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa5); + } else if (SymbolRate > 25000000) { + stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0); + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1); + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa6); + } else { + stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0); + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xd1); + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7); + } + stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x95); + stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40); + stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0x99); + break; + case FE_CAB_MOD_QAM128: + stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00); + stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x76); + stv0367_writereg(state, R367CAB_FSM_STATE, 0x90); + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xb1); + if (SymbolRate > 45000000) + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7); + else if (SymbolRate > 25000000) + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa6); + else + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0x97); + + stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x8e); + stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x7f); + stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7); + break; + case FE_CAB_MOD_QAM256: + stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x94); + stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x5a); + stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0); + if (SymbolRate > 45000000) + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1); + else if (SymbolRate > 25000000) + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1); + else + stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xd1); + + stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7); + stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x85); + stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40); + stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7); + break; + case FE_CAB_MOD_QAM512: + stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00); + break; + case FE_CAB_MOD_QAM1024: + stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00); + break; + default: + break; + } + + return QAMSize; +} + +static u32 stv0367cab_set_derot_freq(struct stv0367_state *state, + u32 adc_hz, s32 derot_hz) +{ + u32 sampled_if = 0; + u32 adc_khz; + + adc_khz = adc_hz / 1000; + + dprintk("%s: adc_hz=%d derot_hz=%d\n", __func__, adc_hz, derot_hz); + + if (adc_khz != 0) { + if (derot_hz < 1000000) + derot_hz = adc_hz / 4; /* ZIF operation */ + if (derot_hz > adc_hz) + derot_hz = derot_hz - adc_hz; + sampled_if = (u32)derot_hz / 1000; + sampled_if *= 32768; + sampled_if /= adc_khz; + sampled_if *= 256; + } + + if (sampled_if > 8388607) + sampled_if = 8388607; + + dprintk("%s: sampled_if=0x%x\n", __func__, sampled_if); + + stv0367_writereg(state, R367CAB_MIX_NCO_LL, sampled_if); + stv0367_writereg(state, R367CAB_MIX_NCO_HL, (sampled_if >> 8)); + stv0367_writebits(state, F367CAB_MIX_NCO_INC_HH, (sampled_if >> 16)); + + return derot_hz; +} + +static u32 stv0367cab_get_derot_freq(struct stv0367_state *state, u32 adc_hz) +{ + u32 sampled_if; + + sampled_if = stv0367_readbits(state, F367CAB_MIX_NCO_INC_LL) + + (stv0367_readbits(state, F367CAB_MIX_NCO_INC_HL) << 8) + + (stv0367_readbits(state, F367CAB_MIX_NCO_INC_HH) << 16); + + sampled_if /= 256; + sampled_if *= (adc_hz / 1000); + sampled_if += 1; + sampled_if /= 32768; + + return sampled_if; +} + +static u32 stv0367cab_set_srate(struct stv0367_state *state, u32 adc_hz, + u32 mclk_hz, u32 SymbolRate, + enum stv0367cab_mod QAMSize) +{ + u32 QamSizeCorr = 0; + u32 u32_tmp = 0, u32_tmp1 = 0; + u32 adp_khz; + + dprintk("%s:\n", __func__); + + /* Set Correction factor of SRC gain */ + switch (QAMSize) { + case FE_CAB_MOD_QAM4: + QamSizeCorr = 1110; + break; + case FE_CAB_MOD_QAM16: + QamSizeCorr = 1032; + break; + case FE_CAB_MOD_QAM32: + QamSizeCorr = 954; + break; + case FE_CAB_MOD_QAM64: + QamSizeCorr = 983; + break; + case FE_CAB_MOD_QAM128: + QamSizeCorr = 957; + break; + case FE_CAB_MOD_QAM256: + QamSizeCorr = 948; + break; + case FE_CAB_MOD_QAM512: + QamSizeCorr = 0; + break; + case FE_CAB_MOD_QAM1024: + QamSizeCorr = 944; + break; + default: + break; + } + + /* Transfer ratio calculation */ + if (adc_hz != 0) { + u32_tmp = 256 * SymbolRate; + u32_tmp = u32_tmp / adc_hz; + } + stv0367_writereg(state, R367CAB_EQU_CRL_TFR, (u8)u32_tmp); + + /* Symbol rate and SRC gain calculation */ + adp_khz = (mclk_hz >> 1) / 1000;/* TRL works at half the system clock */ + if (adp_khz != 0) { + u32_tmp = SymbolRate; + u32_tmp1 = SymbolRate; + + if (u32_tmp < 2097152) { /* 2097152 = 2^21 */ + /* Symbol rate calculation */ + u32_tmp *= 2048; /* 2048 = 2^11 */ + u32_tmp = u32_tmp / adp_khz; + u32_tmp = u32_tmp * 16384; /* 16384 = 2^14 */ + u32_tmp /= 125 ; /* 125 = 1000/2^3 */ + u32_tmp = u32_tmp * 8; /* 8 = 2^3 */ + + /* SRC Gain Calculation */ + u32_tmp1 *= 2048; /* *2*2^10 */ + u32_tmp1 /= 439; /* *2/878 */ + u32_tmp1 *= 256; /* *2^8 */ + u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */ + u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */ + u32_tmp1 = u32_tmp1 / 10000000; + + } else if (u32_tmp < 4194304) { /* 4194304 = 2**22 */ + /* Symbol rate calculation */ + u32_tmp *= 1024 ; /* 1024 = 2**10 */ + u32_tmp = u32_tmp / adp_khz; + u32_tmp = u32_tmp * 16384; /* 16384 = 2**14 */ + u32_tmp /= 125 ; /* 125 = 1000/2**3 */ + u32_tmp = u32_tmp * 16; /* 16 = 2**4 */ + + /* SRC Gain Calculation */ + u32_tmp1 *= 1024; /* *2*2^9 */ + u32_tmp1 /= 439; /* *2/878 */ + u32_tmp1 *= 256; /* *2^8 */ + u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz)*/ + u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */ + u32_tmp1 = u32_tmp1 / 5000000; + } else if (u32_tmp < 8388607) { /* 8388607 = 2**23 */ + /* Symbol rate calculation */ + u32_tmp *= 512 ; /* 512 = 2**9 */ + u32_tmp = u32_tmp / adp_khz; + u32_tmp = u32_tmp * 16384; /* 16384 = 2**14 */ + u32_tmp /= 125 ; /* 125 = 1000/2**3 */ + u32_tmp = u32_tmp * 32; /* 32 = 2**5 */ + + /* SRC Gain Calculation */ + u32_tmp1 *= 512; /* *2*2^8 */ + u32_tmp1 /= 439; /* *2/878 */ + u32_tmp1 *= 256; /* *2^8 */ + u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */ + u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */ + u32_tmp1 = u32_tmp1 / 2500000; + } else { + /* Symbol rate calculation */ + u32_tmp *= 256 ; /* 256 = 2**8 */ + u32_tmp = u32_tmp / adp_khz; + u32_tmp = u32_tmp * 16384; /* 16384 = 2**13 */ + u32_tmp /= 125 ; /* 125 = 1000/2**3 */ + u32_tmp = u32_tmp * 64; /* 64 = 2**6 */ + + /* SRC Gain Calculation */ + u32_tmp1 *= 256; /* 2*2^7 */ + u32_tmp1 /= 439; /* *2/878 */ + u32_tmp1 *= 256; /* *2^8 */ + u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */ + u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */ + u32_tmp1 = u32_tmp1 / 1250000; + } + } +#if 0 + /* Filters' coefficients are calculated and written + into registers only if the filters are enabled */ + if (stv0367_readbits(state, F367CAB_ADJ_EN)) { + stv0367cab_SetIirAdjacentcoefficient(state, mclk_hz, + SymbolRate); + /* AllPass filter must be enabled + when the adjacents filter is used */ + stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 1); + stv0367cab_SetAllPasscoefficient(state, mclk_hz, SymbolRate); + } else + /* AllPass filter must be disabled + when the adjacents filter is not used */ +#endif + stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 0); + + stv0367_writereg(state, R367CAB_SRC_NCO_LL, u32_tmp); + stv0367_writereg(state, R367CAB_SRC_NCO_LH, (u32_tmp >> 8)); + stv0367_writereg(state, R367CAB_SRC_NCO_HL, (u32_tmp >> 16)); + stv0367_writereg(state, R367CAB_SRC_NCO_HH, (u32_tmp >> 24)); + + stv0367_writereg(state, R367CAB_IQDEM_GAIN_SRC_L, u32_tmp1 & 0x00ff); + stv0367_writebits(state, F367CAB_GAIN_SRC_HI, (u32_tmp1 >> 8) & 0x00ff); + + return SymbolRate ; +} + +static u32 stv0367cab_GetSymbolRate(struct stv0367_state *state, u32 mclk_hz) +{ + u32 regsym; + u32 adp_khz; + + regsym = stv0367_readreg(state, R367CAB_SRC_NCO_LL) + + (stv0367_readreg(state, R367CAB_SRC_NCO_LH) << 8) + + (stv0367_readreg(state, R367CAB_SRC_NCO_HL) << 16) + + (stv0367_readreg(state, R367CAB_SRC_NCO_HH) << 24); + + adp_khz = (mclk_hz >> 1) / 1000;/* TRL works at half the system clock */ + + if (regsym < 134217728) { /* 134217728L = 2**27*/ + regsym = regsym * 32; /* 32 = 2**5 */ + regsym = regsym / 32768; /* 32768L = 2**15 */ + regsym = adp_khz * regsym; /* AdpClk in kHz */ + regsym = regsym / 128; /* 128 = 2**7 */ + regsym *= 125 ; /* 125 = 1000/2**3 */ + regsym /= 2048 ; /* 2048 = 2**11 */ + } else if (regsym < 268435456) { /* 268435456L = 2**28 */ + regsym = regsym * 16; /* 16 = 2**4 */ + regsym = regsym / 32768; /* 32768L = 2**15 */ + regsym = adp_khz * regsym; /* AdpClk in kHz */ + regsym = regsym / 128; /* 128 = 2**7 */ + regsym *= 125 ; /* 125 = 1000/2**3*/ + regsym /= 1024 ; /* 256 = 2**10*/ + } else if (regsym < 536870912) { /* 536870912L = 2**29*/ + regsym = regsym * 8; /* 8 = 2**3 */ + regsym = regsym / 32768; /* 32768L = 2**15 */ + regsym = adp_khz * regsym; /* AdpClk in kHz */ + regsym = regsym / 128; /* 128 = 2**7 */ + regsym *= 125 ; /* 125 = 1000/2**3 */ + regsym /= 512 ; /* 128 = 2**9 */ + } else { + regsym = regsym * 4; /* 4 = 2**2 */ + regsym = regsym / 32768; /* 32768L = 2**15 */ + regsym = adp_khz * regsym; /* AdpClk in kHz */ + regsym = regsym / 128; /* 128 = 2**7 */ + regsym *= 125 ; /* 125 = 1000/2**3 */ + regsym /= 256 ; /* 64 = 2**8 */ + } + + return regsym; +} + +static int stv0367cab_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct stv0367_state *state = fe->demodulator_priv; + + dprintk("%s:\n", __func__); + + *status = 0; + + if (stv0367_readbits(state, F367CAB_QAMFEC_LOCK)) { + *status |= FE_HAS_LOCK; + dprintk("%s: stv0367 has locked\n", __func__); + } + + return 0; +} + +static int stv0367cab_standby(struct dvb_frontend *fe, u8 standby_on) +{ + struct stv0367_state *state = fe->demodulator_priv; + + dprintk("%s:\n", __func__); + + if (standby_on) { + stv0367_writebits(state, F367CAB_BYPASS_PLLXN, 0x03); + stv0367_writebits(state, F367CAB_STDBY_PLLXN, 0x01); + stv0367_writebits(state, F367CAB_STDBY, 1); + stv0367_writebits(state, F367CAB_STDBY_CORE, 1); + stv0367_writebits(state, F367CAB_EN_BUFFER_I, 0); + stv0367_writebits(state, F367CAB_EN_BUFFER_Q, 0); + stv0367_writebits(state, F367CAB_POFFQ, 1); + stv0367_writebits(state, F367CAB_POFFI, 1); + } else { + stv0367_writebits(state, F367CAB_STDBY_PLLXN, 0x00); + stv0367_writebits(state, F367CAB_BYPASS_PLLXN, 0x00); + stv0367_writebits(state, F367CAB_STDBY, 0); + stv0367_writebits(state, F367CAB_STDBY_CORE, 0); + stv0367_writebits(state, F367CAB_EN_BUFFER_I, 1); + stv0367_writebits(state, F367CAB_EN_BUFFER_Q, 1); + stv0367_writebits(state, F367CAB_POFFQ, 0); + stv0367_writebits(state, F367CAB_POFFI, 0); + } + + return 0; +} + +static int stv0367cab_sleep(struct dvb_frontend *fe) +{ + return stv0367cab_standby(fe, 1); +} + +static int stv0367cab_init(struct dvb_frontend *fe) +{ + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367cab_state *cab_state = state->cab_state; + int i; + + dprintk("%s:\n", __func__); + + for (i = 0; i < STV0367CAB_NBREGS; i++) + stv0367_writereg(state, def0367cab[i].addr, + def0367cab[i].value); + + switch (state->config->ts_mode) { + case STV0367_DVBCI_CLOCK: + dprintk("Setting TSMode = STV0367_DVBCI_CLOCK\n"); + stv0367_writebits(state, F367CAB_OUTFORMAT, 0x03); + break; + case STV0367_SERIAL_PUNCT_CLOCK: + case STV0367_SERIAL_CONT_CLOCK: + stv0367_writebits(state, F367CAB_OUTFORMAT, 0x01); + break; + case STV0367_PARALLEL_PUNCT_CLOCK: + case STV0367_OUTPUTMODE_DEFAULT: + stv0367_writebits(state, F367CAB_OUTFORMAT, 0x00); + break; + } + + switch (state->config->clk_pol) { + case STV0367_RISINGEDGE_CLOCK: + stv0367_writebits(state, F367CAB_CLK_POLARITY, 0x00); + break; + case STV0367_FALLINGEDGE_CLOCK: + case STV0367_CLOCKPOLARITY_DEFAULT: + stv0367_writebits(state, F367CAB_CLK_POLARITY, 0x01); + break; + } + + stv0367_writebits(state, F367CAB_SYNC_STRIP, 0x00); + + stv0367_writebits(state, F367CAB_CT_NBST, 0x01); + + stv0367_writebits(state, F367CAB_TS_SWAP, 0x01); + + stv0367_writebits(state, F367CAB_FIFO_BYPASS, 0x00); + + stv0367_writereg(state, R367CAB_ANACTRL, 0x00);/*PLL enabled and used */ + + cab_state->mclk = stv0367cab_get_mclk(fe, state->config->xtal); + cab_state->adc_clk = stv0367cab_get_adc_freq(fe, state->config->xtal); + + return 0; +} +static +enum stv0367_cab_signal_type stv0367cab_algo(struct stv0367_state *state, + struct dtv_frontend_properties *p) +{ + struct stv0367cab_state *cab_state = state->cab_state; + enum stv0367_cab_signal_type signalType = FE_CAB_NOAGC; + u32 QAMFEC_Lock, QAM_Lock, u32_tmp, + LockTime, TRLTimeOut, AGCTimeOut, CRLSymbols, + CRLTimeOut, EQLTimeOut, DemodTimeOut, FECTimeOut; + u8 TrackAGCAccum; + s32 tmp; + + dprintk("%s:\n", __func__); + + /* Timeouts calculation */ + /* A max lock time of 25 ms is allowed for delayed AGC */ + AGCTimeOut = 25; + /* 100000 symbols needed by the TRL as a maximum value */ + TRLTimeOut = 100000000 / p->symbol_rate; + /* CRLSymbols is the needed number of symbols to achieve a lock + within [-4%, +4%] of the symbol rate. + CRL timeout is calculated + for a lock within [-search_range, +search_range]. + EQL timeout can be changed depending on + the micro-reflections we want to handle. + A characterization must be performed + with these echoes to get new timeout values. + */ + switch (p->modulation) { + case QAM_16: + CRLSymbols = 150000; + EQLTimeOut = 100; + break; + case QAM_32: + CRLSymbols = 250000; + EQLTimeOut = 100; + break; + case QAM_64: + CRLSymbols = 200000; + EQLTimeOut = 100; + break; + case QAM_128: + CRLSymbols = 250000; + EQLTimeOut = 100; + break; + case QAM_256: + CRLSymbols = 250000; + EQLTimeOut = 100; + break; + default: + CRLSymbols = 200000; + EQLTimeOut = 100; + break; + } +#if 0 + if (pIntParams->search_range < 0) { + CRLTimeOut = (25 * CRLSymbols * + (-pIntParams->search_range / 1000)) / + (pIntParams->symbol_rate / 1000); + } else +#endif + CRLTimeOut = (25 * CRLSymbols * (cab_state->search_range / 1000)) / + (p->symbol_rate / 1000); + + CRLTimeOut = (1000 * CRLTimeOut) / p->symbol_rate; + /* Timeouts below 50ms are coerced */ + if (CRLTimeOut < 50) + CRLTimeOut = 50; + /* A maximum of 100 TS packets is needed to get FEC lock even in case + the spectrum inversion needs to be changed. + This is equal to 20 ms in case of the lowest symbol rate of 0.87Msps + */ + FECTimeOut = 20; + DemodTimeOut = AGCTimeOut + TRLTimeOut + CRLTimeOut + EQLTimeOut; + + dprintk("%s: DemodTimeOut=%d\n", __func__, DemodTimeOut); + + /* Reset the TRL to ensure nothing starts until the + AGC is stable which ensures a better lock time + */ + stv0367_writereg(state, R367CAB_CTRL_1, 0x04); + /* Set AGC accumulation time to minimum and lock threshold to maximum + in order to speed up the AGC lock */ + TrackAGCAccum = stv0367_readbits(state, F367CAB_AGC_ACCUMRSTSEL); + stv0367_writebits(state, F367CAB_AGC_ACCUMRSTSEL, 0x0); + /* Modulus Mapper is disabled */ + stv0367_writebits(state, F367CAB_MODULUSMAP_EN, 0); + /* Disable the sweep function */ + stv0367_writebits(state, F367CAB_SWEEP_EN, 0); + /* The sweep function is never used, Sweep rate must be set to 0 */ + /* Set the derotator frequency in Hz */ + stv0367cab_set_derot_freq(state, cab_state->adc_clk, + (1000 * (s32)state->config->if_khz + cab_state->derot_offset)); + /* Disable the Allpass Filter when the symbol rate is out of range */ + if ((p->symbol_rate > 10800000) | (p->symbol_rate < 1800000)) { + stv0367_writebits(state, F367CAB_ADJ_EN, 0); + stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 0); + } +#if 0 + /* Check if the tuner is locked */ + tuner_lock = stv0367cab_tuner_get_status(fe); + if (tuner_lock == 0) + return FE_367CAB_NOTUNER; +#endif + /* Relase the TRL to start demodulator acquisition */ + /* Wait for QAM lock */ + LockTime = 0; + stv0367_writereg(state, R367CAB_CTRL_1, 0x00); + do { + QAM_Lock = stv0367_readbits(state, F367CAB_FSM_STATUS); + if ((LockTime >= (DemodTimeOut - EQLTimeOut)) && + (QAM_Lock == 0x04)) + /* + * We don't wait longer, the frequency/phase offset + * must be too big + */ + LockTime = DemodTimeOut; + else if ((LockTime >= (AGCTimeOut + TRLTimeOut)) && + (QAM_Lock == 0x02)) + /* + * We don't wait longer, either there is no signal or + * it is not the right symbol rate or it is an analog + * carrier + */ + { + LockTime = DemodTimeOut; + u32_tmp = stv0367_readbits(state, + F367CAB_AGC_PWR_WORD_LO) + + (stv0367_readbits(state, + F367CAB_AGC_PWR_WORD_ME) << 8) + + (stv0367_readbits(state, + F367CAB_AGC_PWR_WORD_HI) << 16); + if (u32_tmp >= 131072) + u32_tmp = 262144 - u32_tmp; + u32_tmp = u32_tmp / (1 << (11 - stv0367_readbits(state, + F367CAB_AGC_IF_BWSEL))); + + if (u32_tmp < stv0367_readbits(state, + F367CAB_AGC_PWRREF_LO) + + 256 * stv0367_readbits(state, + F367CAB_AGC_PWRREF_HI) - 10) + QAM_Lock = 0x0f; + } else { + usleep_range(10000, 20000); + LockTime += 10; + } + dprintk("QAM_Lock=0x%x LockTime=%d\n", QAM_Lock, LockTime); + tmp = stv0367_readreg(state, R367CAB_IT_STATUS1); + + dprintk("R367CAB_IT_STATUS1=0x%x\n", tmp); + + } while (((QAM_Lock != 0x0c) && (QAM_Lock != 0x0b)) && + (LockTime < DemodTimeOut)); + + dprintk("QAM_Lock=0x%x\n", QAM_Lock); + + tmp = stv0367_readreg(state, R367CAB_IT_STATUS1); + dprintk("R367CAB_IT_STATUS1=0x%x\n", tmp); + tmp = stv0367_readreg(state, R367CAB_IT_STATUS2); + dprintk("R367CAB_IT_STATUS2=0x%x\n", tmp); + + tmp = stv0367cab_get_derot_freq(state, cab_state->adc_clk); + dprintk("stv0367cab_get_derot_freq=0x%x\n", tmp); + + if ((QAM_Lock == 0x0c) || (QAM_Lock == 0x0b)) { + /* Wait for FEC lock */ + LockTime = 0; + do { + usleep_range(5000, 7000); + LockTime += 5; + QAMFEC_Lock = stv0367_readbits(state, + F367CAB_QAMFEC_LOCK); + } while (!QAMFEC_Lock && (LockTime < FECTimeOut)); + } else + QAMFEC_Lock = 0; + + if (QAMFEC_Lock) { + signalType = FE_CAB_DATAOK; + cab_state->modulation = p->modulation; + cab_state->spect_inv = stv0367_readbits(state, + F367CAB_QUAD_INV); +#if 0 +/* not clear for me */ + if (state->config->if_khz != 0) { + if (state->config->if_khz > cab_state->adc_clk / 1000) { + cab_state->freq_khz = + FE_Cab_TunerGetFrequency(pIntParams->hTuner) + - stv0367cab_get_derot_freq(state, cab_state->adc_clk) + - cab_state->adc_clk / 1000 + state->config->if_khz; + } else { + cab_state->freq_khz = + FE_Cab_TunerGetFrequency(pIntParams->hTuner) + - stv0367cab_get_derot_freq(state, cab_state->adc_clk) + + state->config->if_khz; + } + } else { + cab_state->freq_khz = + FE_Cab_TunerGetFrequency(pIntParams->hTuner) + + stv0367cab_get_derot_freq(state, + cab_state->adc_clk) - + cab_state->adc_clk / 4000; + } +#endif + cab_state->symbol_rate = stv0367cab_GetSymbolRate(state, + cab_state->mclk); + cab_state->locked = 1; + + /* stv0367_setbits(state, F367CAB_AGC_ACCUMRSTSEL,7);*/ + } else { + switch (QAM_Lock) { + case 1: + signalType = FE_CAB_NOAGC; + break; + case 2: + signalType = FE_CAB_NOTIMING; + break; + case 3: + signalType = FE_CAB_TIMINGOK; + break; + case 4: + signalType = FE_CAB_NOCARRIER; + break; + case 5: + signalType = FE_CAB_CARRIEROK; + break; + case 7: + signalType = FE_CAB_NOBLIND; + break; + case 8: + signalType = FE_CAB_BLINDOK; + break; + case 10: + signalType = FE_CAB_NODEMOD; + break; + case 11: + signalType = FE_CAB_DEMODOK; + break; + case 12: + signalType = FE_CAB_DEMODOK; + break; + case 13: + signalType = FE_CAB_NODEMOD; + break; + case 14: + signalType = FE_CAB_NOBLIND; + break; + case 15: + signalType = FE_CAB_NOSIGNAL; + break; + default: + break; + } + + } + + /* Set the AGC control values to tracking values */ + stv0367_writebits(state, F367CAB_AGC_ACCUMRSTSEL, TrackAGCAccum); + return signalType; +} + +static int stv0367cab_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367cab_state *cab_state = state->cab_state; + enum stv0367cab_mod QAMSize = 0; + + dprintk("%s: freq = %d, srate = %d\n", __func__, + p->frequency, p->symbol_rate); + + cab_state->derot_offset = 0; + + switch (p->modulation) { + case QAM_16: + QAMSize = FE_CAB_MOD_QAM16; + break; + case QAM_32: + QAMSize = FE_CAB_MOD_QAM32; + break; + case QAM_64: + QAMSize = FE_CAB_MOD_QAM64; + break; + case QAM_128: + QAMSize = FE_CAB_MOD_QAM128; + break; + case QAM_256: + QAMSize = FE_CAB_MOD_QAM256; + break; + default: + break; + } + + stv0367cab_init(fe); + + /* Tuner Frequency Setting */ + if (fe->ops.tuner_ops.set_params) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + stv0367cab_SetQamSize( + state, + p->symbol_rate, + QAMSize); + + stv0367cab_set_srate(state, + cab_state->adc_clk, + cab_state->mclk, + p->symbol_rate, + QAMSize); + /* Search algorithm launch, [-1.1*RangeOffset, +1.1*RangeOffset] scan */ + cab_state->state = stv0367cab_algo(state, p); + return 0; +} + +static int stv0367cab_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0367_state *state = fe->demodulator_priv; + struct stv0367cab_state *cab_state = state->cab_state; + + enum stv0367cab_mod QAMSize; + + dprintk("%s:\n", __func__); + + p->symbol_rate = stv0367cab_GetSymbolRate(state, cab_state->mclk); + + QAMSize = stv0367_readbits(state, F367CAB_QAM_MODE); + switch (QAMSize) { + case FE_CAB_MOD_QAM16: + p->modulation = QAM_16; + break; + case FE_CAB_MOD_QAM32: + p->modulation = QAM_32; + break; + case FE_CAB_MOD_QAM64: + p->modulation = QAM_64; + break; + case FE_CAB_MOD_QAM128: + p->modulation = QAM_128; + break; + case QAM_256: + p->modulation = QAM_256; + break; + default: + break; + } + + p->frequency = stv0367_get_tuner_freq(fe); + + dprintk("%s: tuner frequency = %d\n", __func__, p->frequency); + + if (state->config->if_khz == 0) { + p->frequency += + (stv0367cab_get_derot_freq(state, cab_state->adc_clk) - + cab_state->adc_clk / 4000); + return 0; + } + + if (state->config->if_khz > cab_state->adc_clk / 1000) + p->frequency += (state->config->if_khz + - stv0367cab_get_derot_freq(state, cab_state->adc_clk) + - cab_state->adc_clk / 1000); + else + p->frequency += (state->config->if_khz + - stv0367cab_get_derot_freq(state, cab_state->adc_clk)); + + return 0; +} + +#if 0 +void stv0367cab_GetErrorCount(state, enum stv0367cab_mod QAMSize, + u32 symbol_rate, FE_367qam_Monitor *Monitor_results) +{ + stv0367cab_OptimiseNByteAndGetBER(state, QAMSize, symbol_rate, Monitor_results); + stv0367cab_GetPacketsCount(state, Monitor_results); + + return; +} + +static int stv0367cab_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct stv0367_state *state = fe->demodulator_priv; + + return 0; +} +#endif +static s32 stv0367cab_get_rf_lvl(struct stv0367_state *state) +{ + s32 rfLevel = 0; + s32 RfAgcPwm = 0, IfAgcPwm = 0; + u8 i; + + stv0367_writebits(state, F367CAB_STDBY_ADCGP, 0x0); + + RfAgcPwm = + (stv0367_readbits(state, F367CAB_RF_AGC1_LEVEL_LO) & 0x03) + + (stv0367_readbits(state, F367CAB_RF_AGC1_LEVEL_HI) << 2); + RfAgcPwm = 100 * RfAgcPwm / 1023; + + IfAgcPwm = + stv0367_readbits(state, F367CAB_AGC_IF_PWMCMD_LO) + + (stv0367_readbits(state, F367CAB_AGC_IF_PWMCMD_HI) << 8); + if (IfAgcPwm >= 2048) + IfAgcPwm -= 2048; + else + IfAgcPwm += 2048; + + IfAgcPwm = 100 * IfAgcPwm / 4095; + + /* For DTT75467 on NIM */ + if (RfAgcPwm < 90 && IfAgcPwm < 28) { + for (i = 0; i < RF_LOOKUP_TABLE_SIZE; i++) { + if (RfAgcPwm <= stv0367cab_RF_LookUp1[0][i]) { + rfLevel = (-1) * stv0367cab_RF_LookUp1[1][i]; + break; + } + } + if (i == RF_LOOKUP_TABLE_SIZE) + rfLevel = -56; + } else { /*if IF AGC>10*/ + for (i = 0; i < RF_LOOKUP_TABLE2_SIZE; i++) { + if (IfAgcPwm <= stv0367cab_RF_LookUp2[0][i]) { + rfLevel = (-1) * stv0367cab_RF_LookUp2[1][i]; + break; + } + } + if (i == RF_LOOKUP_TABLE2_SIZE) + rfLevel = -72; + } + return rfLevel; +} + +static int stv0367cab_read_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct stv0367_state *state = fe->demodulator_priv; + + s32 signal = stv0367cab_get_rf_lvl(state); + + dprintk("%s: signal=%d dBm\n", __func__, signal); + + if (signal <= -72) + *strength = 65535; + else + *strength = (22 + signal) * (-1311); + + dprintk("%s: strength=%d\n", __func__, (*strength)); + + return 0; +} + +static int stv0367cab_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct stv0367_state *state = fe->demodulator_priv; + u32 noisepercentage; + enum stv0367cab_mod QAMSize; + u32 regval = 0, temp = 0; + int power, i; + + QAMSize = stv0367_readbits(state, F367CAB_QAM_MODE); + switch (QAMSize) { + case FE_CAB_MOD_QAM4: + power = 21904; + break; + case FE_CAB_MOD_QAM16: + power = 20480; + break; + case FE_CAB_MOD_QAM32: + power = 23040; + break; + case FE_CAB_MOD_QAM64: + power = 21504; + break; + case FE_CAB_MOD_QAM128: + power = 23616; + break; + case FE_CAB_MOD_QAM256: + power = 21760; + break; + case FE_CAB_MOD_QAM512: + power = 1; + break; + case FE_CAB_MOD_QAM1024: + power = 21280; + break; + default: + power = 1; + break; + } + + for (i = 0; i < 10; i++) { + regval += (stv0367_readbits(state, F367CAB_SNR_LO) + + 256 * stv0367_readbits(state, F367CAB_SNR_HI)); + } + + regval /= 10; /*for average over 10 times in for loop above*/ + if (regval != 0) { + temp = power + * (1 << (3 + stv0367_readbits(state, F367CAB_SNR_PER))); + temp /= regval; + } + + /* table values, not needed to calculate logarithms */ + if (temp >= 5012) + noisepercentage = 100; + else if (temp >= 3981) + noisepercentage = 93; + else if (temp >= 3162) + noisepercentage = 86; + else if (temp >= 2512) + noisepercentage = 79; + else if (temp >= 1995) + noisepercentage = 72; + else if (temp >= 1585) + noisepercentage = 65; + else if (temp >= 1259) + noisepercentage = 58; + else if (temp >= 1000) + noisepercentage = 50; + else if (temp >= 794) + noisepercentage = 43; + else if (temp >= 501) + noisepercentage = 36; + else if (temp >= 316) + noisepercentage = 29; + else if (temp >= 200) + noisepercentage = 22; + else if (temp >= 158) + noisepercentage = 14; + else if (temp >= 126) + noisepercentage = 7; + else + noisepercentage = 0; + + dprintk("%s: noisepercentage=%d\n", __func__, noisepercentage); + + *snr = (noisepercentage * 65535) / 100; + + return 0; +} + +static int stv0367cab_read_ucblcks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct stv0367_state *state = fe->demodulator_priv; + int corrected, tscount; + + *ucblocks = (stv0367_readreg(state, R367CAB_RS_COUNTER_5) << 8) + | stv0367_readreg(state, R367CAB_RS_COUNTER_4); + corrected = (stv0367_readreg(state, R367CAB_RS_COUNTER_3) << 8) + | stv0367_readreg(state, R367CAB_RS_COUNTER_2); + tscount = (stv0367_readreg(state, R367CAB_RS_COUNTER_2) << 8) + | stv0367_readreg(state, R367CAB_RS_COUNTER_1); + + dprintk("%s: uncorrected blocks=%d corrected blocks=%d tscount=%d\n", + __func__, *ucblocks, corrected, tscount); + + return 0; +}; + +static struct dvb_frontend_ops stv0367cab_ops = { + .delsys = { SYS_DVBC_ANNEX_A }, + .info = { + .name = "ST STV0367 DVB-C", + .frequency_min = 47000000, + .frequency_max = 862000000, + .frequency_stepsize = 62500, + .symbol_rate_min = 870000, + .symbol_rate_max = 11700000, + .caps = 0x400 |/* FE_CAN_QAM_4 */ + FE_CAN_QAM_16 | FE_CAN_QAM_32 | + FE_CAN_QAM_64 | FE_CAN_QAM_128 | + FE_CAN_QAM_256 | FE_CAN_FEC_AUTO + }, + .release = stv0367_release, + .init = stv0367cab_init, + .sleep = stv0367cab_sleep, + .i2c_gate_ctrl = stv0367cab_gate_ctrl, + .set_frontend = stv0367cab_set_frontend, + .get_frontend = stv0367cab_get_frontend, + .read_status = stv0367cab_read_status, +/* .read_ber = stv0367cab_read_ber, */ + .read_signal_strength = stv0367cab_read_strength, + .read_snr = stv0367cab_read_snr, + .read_ucblocks = stv0367cab_read_ucblcks, + .get_tune_settings = stv0367_get_tune_settings, +}; + +struct dvb_frontend *stv0367cab_attach(const struct stv0367_config *config, + struct i2c_adapter *i2c) +{ + struct stv0367_state *state = NULL; + struct stv0367cab_state *cab_state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct stv0367_state), GFP_KERNEL); + if (state == NULL) + goto error; + cab_state = kzalloc(sizeof(struct stv0367cab_state), GFP_KERNEL); + if (cab_state == NULL) + goto error; + + /* setup the state */ + state->i2c = i2c; + state->config = config; + cab_state->search_range = 280000; + state->cab_state = cab_state; + state->fe.ops = stv0367cab_ops; + state->fe.demodulator_priv = state; + state->chip_id = stv0367_readreg(state, 0xf000); + + dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id); + + /* check if the demod is there */ + if ((state->chip_id != 0x50) && (state->chip_id != 0x60)) + goto error; + + return &state->fe; + +error: + kfree(cab_state); + kfree(state); + return NULL; +} +EXPORT_SYMBOL(stv0367cab_attach); + +MODULE_PARM_DESC(debug, "Set debug"); +MODULE_PARM_DESC(i2c_debug, "Set i2c debug"); + +MODULE_AUTHOR("Igor M. Liplianin"); +MODULE_DESCRIPTION("ST STV0367 DVB-C/T demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/stv0367.h b/drivers/media/dvb-frontends/stv0367.h new file mode 100644 index 00000000..ea80b341 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0367.h @@ -0,0 +1,66 @@ +/* + * stv0367.h + * + * Driver for ST STV0367 DVB-T & DVB-C demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2010,2011 NetUP Inc. + * Copyright (C) 2010,2011 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef STV0367_H +#define STV0367_H + +#include +#include +#include "dvb_frontend.h" + +struct stv0367_config { + u8 demod_address; + u32 xtal; + u32 if_khz;/*4500*/ + int if_iq_mode; + int ts_mode; + int clk_pol; +}; + +#if IS_ENABLED(CONFIG_DVB_STV0367) +extern struct +dvb_frontend *stv0367ter_attach(const struct stv0367_config *config, + struct i2c_adapter *i2c); +extern struct +dvb_frontend *stv0367cab_attach(const struct stv0367_config *config, + struct i2c_adapter *i2c); +#else +static inline struct +dvb_frontend *stv0367ter_attach(const struct stv0367_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static inline struct +dvb_frontend *stv0367cab_attach(const struct stv0367_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/stv0367_priv.h b/drivers/media/dvb-frontends/stv0367_priv.h new file mode 100644 index 00000000..995db068 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0367_priv.h @@ -0,0 +1,212 @@ +/* + * stv0367_priv.h + * + * Driver for ST STV0367 DVB-T & DVB-C demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2010,2011 NetUP Inc. + * Copyright (C) 2010,2011 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +/* Common driver error constants */ + +#ifndef STV0367_PRIV_H +#define STV0367_PRIV_H + +#ifndef TRUE + #define TRUE (1 == 1) +#endif +#ifndef FALSE + #define FALSE (!TRUE) +#endif + +#ifndef NULL +#define NULL 0 +#endif + +/* MACRO definitions */ +#define ABS(X) ((X) < 0 ? (-1 * (X)) : (X)) +#define MAX(X, Y) ((X) >= (Y) ? (X) : (Y)) +#define MIN(X, Y) ((X) <= (Y) ? (X) : (Y)) +#define INRANGE(X, Y, Z) \ + ((((X) <= (Y)) && ((Y) <= (Z))) || \ + (((Z) <= (Y)) && ((Y) <= (X))) ? 1 : 0) + +#ifndef MAKEWORD +#define MAKEWORD(X, Y) (((X) << 8) + (Y)) +#endif + +#define LSB(X) (((X) & 0xff)) +#define MSB(Y) (((Y) >> 8) & 0xff) +#define MMSB(Y)(((Y) >> 16) & 0xff) + +enum stv0367_ter_signal_type { + FE_TER_NOAGC = 0, + FE_TER_AGCOK = 5, + FE_TER_NOTPS = 6, + FE_TER_TPSOK = 7, + FE_TER_NOSYMBOL = 8, + FE_TER_BAD_CPQ = 9, + FE_TER_PRFOUNDOK = 10, + FE_TER_NOPRFOUND = 11, + FE_TER_LOCKOK = 12, + FE_TER_NOLOCK = 13, + FE_TER_SYMBOLOK = 15, + FE_TER_CPAMPOK = 16, + FE_TER_NOCPAMP = 17, + FE_TER_SWNOK = 18 +}; + +enum stv0367_ts_mode { + STV0367_OUTPUTMODE_DEFAULT, + STV0367_SERIAL_PUNCT_CLOCK, + STV0367_SERIAL_CONT_CLOCK, + STV0367_PARALLEL_PUNCT_CLOCK, + STV0367_DVBCI_CLOCK +}; + +enum stv0367_clk_pol { + STV0367_CLOCKPOLARITY_DEFAULT, + STV0367_RISINGEDGE_CLOCK, + STV0367_FALLINGEDGE_CLOCK +}; + +enum stv0367_ter_bw { + FE_TER_CHAN_BW_6M = 6, + FE_TER_CHAN_BW_7M = 7, + FE_TER_CHAN_BW_8M = 8 +}; + +#if 0 +enum FE_TER_Rate_TPS { + FE_TER_TPS_1_2 = 0, + FE_TER_TPS_2_3 = 1, + FE_TER_TPS_3_4 = 2, + FE_TER_TPS_5_6 = 3, + FE_TER_TPS_7_8 = 4 +}; +#endif + +enum stv0367_ter_mode { + FE_TER_MODE_2K, + FE_TER_MODE_8K, + FE_TER_MODE_4K +}; +#if 0 +enum FE_TER_Hierarchy_Alpha { + FE_TER_HIER_ALPHA_NONE, /* Regular modulation */ + FE_TER_HIER_ALPHA_1, /* Hierarchical modulation a = 1*/ + FE_TER_HIER_ALPHA_2, /* Hierarchical modulation a = 2*/ + FE_TER_HIER_ALPHA_4 /* Hierarchical modulation a = 4*/ +}; +#endif +enum stv0367_ter_hierarchy { + FE_TER_HIER_NONE, /*Hierarchy None*/ + FE_TER_HIER_LOW_PRIO, /*Hierarchy : Low Priority*/ + FE_TER_HIER_HIGH_PRIO, /*Hierarchy : High Priority*/ + FE_TER_HIER_PRIO_ANY /*Hierarchy :Any*/ +}; + +#if 0 +enum fe_stv0367_ter_spec { + FE_TER_INVERSION_NONE = 0, + FE_TER_INVERSION = 1, + FE_TER_INVERSION_AUTO = 2, + FE_TER_INVERSION_UNK = 4 +}; +#endif + +enum stv0367_ter_if_iq_mode { + FE_TER_NORMAL_IF_TUNER = 0, + FE_TER_LONGPATH_IF_TUNER = 1, + FE_TER_IQ_TUNER = 2 + +}; + +#if 0 +enum FE_TER_FECRate { + FE_TER_FEC_NONE = 0x00, /* no FEC rate specified */ + FE_TER_FEC_ALL = 0xFF, /* Logical OR of all FECs */ + FE_TER_FEC_1_2 = 1, + FE_TER_FEC_2_3 = (1 << 1), + FE_TER_FEC_3_4 = (1 << 2), + FE_TER_FEC_4_5 = (1 << 3), + FE_TER_FEC_5_6 = (1 << 4), + FE_TER_FEC_6_7 = (1 << 5), + FE_TER_FEC_7_8 = (1 << 6), + FE_TER_FEC_8_9 = (1 << 7) +}; + +enum FE_TER_Rate { + FE_TER_FE_1_2 = 0, + FE_TER_FE_2_3 = 1, + FE_TER_FE_3_4 = 2, + FE_TER_FE_5_6 = 3, + FE_TER_FE_6_7 = 4, + FE_TER_FE_7_8 = 5 +}; +#endif + +enum stv0367_ter_force { + FE_TER_FORCENONE = 0, + FE_TER_FORCE_M_G = 1 +}; + +enum stv0367cab_mod { + FE_CAB_MOD_QAM4, + FE_CAB_MOD_QAM16, + FE_CAB_MOD_QAM32, + FE_CAB_MOD_QAM64, + FE_CAB_MOD_QAM128, + FE_CAB_MOD_QAM256, + FE_CAB_MOD_QAM512, + FE_CAB_MOD_QAM1024 +}; +#if 0 +enum { + FE_CAB_FEC_A = 1, /* J83 Annex A */ + FE_CAB_FEC_B = (1 << 1),/* J83 Annex B */ + FE_CAB_FEC_C = (1 << 2) /* J83 Annex C */ +} FE_CAB_FECType_t; +#endif +struct stv0367_cab_signal_info { + int locked; + u32 frequency; /* kHz */ + u32 symbol_rate; /* Mbds */ + enum stv0367cab_mod modulation; + fe_spectral_inversion_t spect_inv; + s32 Power_dBmx10; /* Power of the RF signal (dBm x 10) */ + u32 CN_dBx10; /* Carrier to noise ratio (dB x 10) */ + u32 BER; /* Bit error rate (x 10000000) */ +}; + +enum stv0367_cab_signal_type { + FE_CAB_NOTUNER, + FE_CAB_NOAGC, + FE_CAB_NOSIGNAL, + FE_CAB_NOTIMING, + FE_CAB_TIMINGOK, + FE_CAB_NOCARRIER, + FE_CAB_CARRIEROK, + FE_CAB_NOBLIND, + FE_CAB_BLINDOK, + FE_CAB_NODEMOD, + FE_CAB_DEMODOK, + FE_CAB_DATAOK +}; + +#endif diff --git a/drivers/media/dvb-frontends/stv0367_regs.h b/drivers/media/dvb-frontends/stv0367_regs.h new file mode 100644 index 00000000..a96fbdc7 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0367_regs.h @@ -0,0 +1,3614 @@ +/* + * stv0367_regs.h + * + * Driver for ST STV0367 DVB-T & DVB-C demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2010,2011 NetUP Inc. + * Copyright (C) 2010,2011 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef STV0367_REGS_H +#define STV0367_REGS_H + +/* ID */ +#define R367TER_ID 0xf000 +#define F367TER_IDENTIFICATIONREG 0xf00000ff + +/* I2CRPT */ +#define R367TER_I2CRPT 0xf001 +#define F367TER_I2CT_ON 0xf0010080 +#define F367TER_ENARPT_LEVEL 0xf0010070 +#define F367TER_SCLT_DELAY 0xf0010008 +#define F367TER_SCLT_NOD 0xf0010004 +#define F367TER_STOP_ENABLE 0xf0010002 +#define F367TER_SDAT_NOD 0xf0010001 + +/* TOPCTRL */ +#define R367TER_TOPCTRL 0xf002 +#define F367TER_STDBY 0xf0020080 +#define F367TER_STDBY_FEC 0xf0020040 +#define F367TER_STDBY_CORE 0xf0020020 +#define F367TER_QAM_COFDM 0xf0020010 +#define F367TER_TS_DIS 0xf0020008 +#define F367TER_DIR_CLK_216 0xf0020004 +#define F367TER_TUNER_BB 0xf0020002 +#define F367TER_DVBT_H 0xf0020001 + +/* IOCFG0 */ +#define R367TER_IOCFG0 0xf003 +#define F367TER_OP0_SD 0xf0030080 +#define F367TER_OP0_VAL 0xf0030040 +#define F367TER_OP0_OD 0xf0030020 +#define F367TER_OP0_INV 0xf0030010 +#define F367TER_OP0_DACVALUE_HI 0xf003000f + +/* DAc0R */ +#define R367TER_DAC0R 0xf004 +#define F367TER_OP0_DACVALUE_LO 0xf00400ff + +/* IOCFG1 */ +#define R367TER_IOCFG1 0xf005 +#define F367TER_IP0 0xf0050040 +#define F367TER_OP1_OD 0xf0050020 +#define F367TER_OP1_INV 0xf0050010 +#define F367TER_OP1_DACVALUE_HI 0xf005000f + +/* DAC1R */ +#define R367TER_DAC1R 0xf006 +#define F367TER_OP1_DACVALUE_LO 0xf00600ff + +/* IOCFG2 */ +#define R367TER_IOCFG2 0xf007 +#define F367TER_OP2_LOCK_CONF 0xf00700e0 +#define F367TER_OP2_OD 0xf0070010 +#define F367TER_OP2_VAL 0xf0070008 +#define F367TER_OP1_LOCK_CONF 0xf0070007 + +/* SDFR */ +#define R367TER_SDFR 0xf008 +#define F367TER_OP0_FREQ 0xf00800f0 +#define F367TER_OP1_FREQ 0xf008000f + +/* STATUS */ +#define R367TER_STATUS 0xf009 +#define F367TER_TPS_LOCK 0xf0090080 +#define F367TER_SYR_LOCK 0xf0090040 +#define F367TER_AGC_LOCK 0xf0090020 +#define F367TER_PRF 0xf0090010 +#define F367TER_LK 0xf0090008 +#define F367TER_PR 0xf0090007 + +/* AUX_CLK */ +#define R367TER_AUX_CLK 0xf00a +#define F367TER_AUXFEC_CTL 0xf00a00c0 +#define F367TER_DIS_CKX4 0xf00a0020 +#define F367TER_CKSEL 0xf00a0018 +#define F367TER_CKDIV_PROG 0xf00a0006 +#define F367TER_AUXCLK_ENA 0xf00a0001 + +/* FREESYS1 */ +#define R367TER_FREESYS1 0xf00b +#define F367TER_FREE_SYS1 0xf00b00ff + +/* FREESYS2 */ +#define R367TER_FREESYS2 0xf00c +#define F367TER_FREE_SYS2 0xf00c00ff + +/* FREESYS3 */ +#define R367TER_FREESYS3 0xf00d +#define F367TER_FREE_SYS3 0xf00d00ff + +/* GPIO_CFG */ +#define R367TER_GPIO_CFG 0xf00e +#define F367TER_GPIO7_NOD 0xf00e0080 +#define F367TER_GPIO7_CFG 0xf00e0040 +#define F367TER_GPIO6_NOD 0xf00e0020 +#define F367TER_GPIO6_CFG 0xf00e0010 +#define F367TER_GPIO5_NOD 0xf00e0008 +#define F367TER_GPIO5_CFG 0xf00e0004 +#define F367TER_GPIO4_NOD 0xf00e0002 +#define F367TER_GPIO4_CFG 0xf00e0001 + +/* GPIO_CMD */ +#define R367TER_GPIO_CMD 0xf00f +#define F367TER_GPIO7_VAL 0xf00f0008 +#define F367TER_GPIO6_VAL 0xf00f0004 +#define F367TER_GPIO5_VAL 0xf00f0002 +#define F367TER_GPIO4_VAL 0xf00f0001 + +/* AGC2MAX */ +#define R367TER_AGC2MAX 0xf010 +#define F367TER_AGC2_MAX 0xf01000ff + +/* AGC2MIN */ +#define R367TER_AGC2MIN 0xf011 +#define F367TER_AGC2_MIN 0xf01100ff + +/* AGC1MAX */ +#define R367TER_AGC1MAX 0xf012 +#define F367TER_AGC1_MAX 0xf01200ff + +/* AGC1MIN */ +#define R367TER_AGC1MIN 0xf013 +#define F367TER_AGC1_MIN 0xf01300ff + +/* AGCR */ +#define R367TER_AGCR 0xf014 +#define F367TER_RATIO_A 0xf01400e0 +#define F367TER_RATIO_B 0xf0140018 +#define F367TER_RATIO_C 0xf0140007 + +/* AGC2TH */ +#define R367TER_AGC2TH 0xf015 +#define F367TER_AGC2_THRES 0xf01500ff + +/* AGC12c */ +#define R367TER_AGC12C 0xf016 +#define F367TER_AGC1_IV 0xf0160080 +#define F367TER_AGC1_OD 0xf0160040 +#define F367TER_AGC1_LOAD 0xf0160020 +#define F367TER_AGC2_IV 0xf0160010 +#define F367TER_AGC2_OD 0xf0160008 +#define F367TER_AGC2_LOAD 0xf0160004 +#define F367TER_AGC12_MODE 0xf0160003 + +/* AGCCTRL1 */ +#define R367TER_AGCCTRL1 0xf017 +#define F367TER_DAGC_ON 0xf0170080 +#define F367TER_INVERT_AGC12 0xf0170040 +#define F367TER_AGC1_MODE 0xf0170008 +#define F367TER_AGC2_MODE 0xf0170007 + +/* AGCCTRL2 */ +#define R367TER_AGCCTRL2 0xf018 +#define F367TER_FRZ2_CTRL 0xf0180060 +#define F367TER_FRZ1_CTRL 0xf0180018 +#define F367TER_TIME_CST 0xf0180007 + +/* AGC1VAL1 */ +#define R367TER_AGC1VAL1 0xf019 +#define F367TER_AGC1_VAL_LO 0xf01900ff + +/* AGC1VAL2 */ +#define R367TER_AGC1VAL2 0xf01a +#define F367TER_AGC1_VAL_HI 0xf01a000f + +/* AGC2VAL1 */ +#define R367TER_AGC2VAL1 0xf01b +#define F367TER_AGC2_VAL_LO 0xf01b00ff + +/* AGC2VAL2 */ +#define R367TER_AGC2VAL2 0xf01c +#define F367TER_AGC2_VAL_HI 0xf01c000f + +/* AGC2PGA */ +#define R367TER_AGC2PGA 0xf01d +#define F367TER_AGC2_PGA 0xf01d00ff + +/* OVF_RATE1 */ +#define R367TER_OVF_RATE1 0xf01e +#define F367TER_OVF_RATE_HI 0xf01e000f + +/* OVF_RATE2 */ +#define R367TER_OVF_RATE2 0xf01f +#define F367TER_OVF_RATE_LO 0xf01f00ff + +/* GAIN_SRC1 */ +#define R367TER_GAIN_SRC1 0xf020 +#define F367TER_INV_SPECTR 0xf0200080 +#define F367TER_IQ_INVERT 0xf0200040 +#define F367TER_INR_BYPASS 0xf0200020 +#define F367TER_STATUS_INV_SPECRUM 0xf0200010 +#define F367TER_GAIN_SRC_HI 0xf020000f + +/* GAIN_SRC2 */ +#define R367TER_GAIN_SRC2 0xf021 +#define F367TER_GAIN_SRC_LO 0xf02100ff + +/* INC_DEROT1 */ +#define R367TER_INC_DEROT1 0xf022 +#define F367TER_INC_DEROT_HI 0xf02200ff + +/* INC_DEROT2 */ +#define R367TER_INC_DEROT2 0xf023 +#define F367TER_INC_DEROT_LO 0xf02300ff + +/* PPM_CPAMP_DIR */ +#define R367TER_PPM_CPAMP_DIR 0xf024 +#define F367TER_PPM_CPAMP_DIRECT 0xf02400ff + +/* PPM_CPAMP_INV */ +#define R367TER_PPM_CPAMP_INV 0xf025 +#define F367TER_PPM_CPAMP_INVER 0xf02500ff + +/* FREESTFE_1 */ +#define R367TER_FREESTFE_1 0xf026 +#define F367TER_SYMBOL_NUMBER_INC 0xf02600c0 +#define F367TER_SEL_LSB 0xf0260004 +#define F367TER_AVERAGE_ON 0xf0260002 +#define F367TER_DC_ADJ 0xf0260001 + +/* FREESTFE_2 */ +#define R367TER_FREESTFE_2 0xf027 +#define F367TER_SEL_SRCOUT 0xf02700c0 +#define F367TER_SEL_SYRTHR 0xf027001f + +/* DCOFFSET */ +#define R367TER_DCOFFSET 0xf028 +#define F367TER_SELECT_I_Q 0xf0280080 +#define F367TER_DC_OFFSET 0xf028007f + +/* EN_PROCESS */ +#define R367TER_EN_PROCESS 0xf029 +#define F367TER_FREE 0xf02900f0 +#define F367TER_ENAB_MANUAL 0xf0290001 + +/* SDI_SMOOTHER */ +#define R367TER_SDI_SMOOTHER 0xf02a +#define F367TER_DIS_SMOOTH 0xf02a0080 +#define F367TER_SDI_INC_SMOOTHER 0xf02a007f + +/* FE_LOOP_OPEN */ +#define R367TER_FE_LOOP_OPEN 0xf02b +#define F367TER_TRL_LOOP_OP 0xf02b0002 +#define F367TER_CRL_LOOP_OP 0xf02b0001 + +/* FREQOFF1 */ +#define R367TER_FREQOFF1 0xf02c +#define F367TER_FREQ_OFFSET_LOOP_OPEN_VHI 0xf02c00ff + +/* FREQOFF2 */ +#define R367TER_FREQOFF2 0xf02d +#define F367TER_FREQ_OFFSET_LOOP_OPEN_HI 0xf02d00ff + +/* FREQOFF3 */ +#define R367TER_FREQOFF3 0xf02e +#define F367TER_FREQ_OFFSET_LOOP_OPEN_LO 0xf02e00ff + +/* TIMOFF1 */ +#define R367TER_TIMOFF1 0xf02f +#define F367TER_TIM_OFFSET_LOOP_OPEN_HI 0xf02f00ff + +/* TIMOFF2 */ +#define R367TER_TIMOFF2 0xf030 +#define F367TER_TIM_OFFSET_LOOP_OPEN_LO 0xf03000ff + +/* EPQ */ +#define R367TER_EPQ 0xf031 +#define F367TER_EPQ1 0xf03100ff + +/* EPQAUTO */ +#define R367TER_EPQAUTO 0xf032 +#define F367TER_EPQ2 0xf03200ff + +/* SYR_UPDATE */ +#define R367TER_SYR_UPDATE 0xf033 +#define F367TER_SYR_PROTV 0xf0330080 +#define F367TER_SYR_PROTV_GAIN 0xf0330060 +#define F367TER_SYR_FILTER 0xf0330010 +#define F367TER_SYR_TRACK_THRES 0xf033000c + +/* CHPFREE */ +#define R367TER_CHPFREE 0xf034 +#define F367TER_CHP_FREE 0xf03400ff + +/* PPM_STATE_MAC */ +#define R367TER_PPM_STATE_MAC 0xf035 +#define F367TER_PPM_STATE_MACHINE_DECODER 0xf035003f + +/* INR_THRESHOLD */ +#define R367TER_INR_THRESHOLD 0xf036 +#define F367TER_INR_THRESH 0xf03600ff + +/* EPQ_TPS_ID_CELL */ +#define R367TER_EPQ_TPS_ID_CELL 0xf037 +#define F367TER_ENABLE_LGTH_TO_CF 0xf0370080 +#define F367TER_DIS_TPS_RSVD 0xf0370040 +#define F367TER_DIS_BCH 0xf0370020 +#define F367TER_DIS_ID_CEL 0xf0370010 +#define F367TER_TPS_ADJUST_SYM 0xf037000f + +/* EPQ_CFG */ +#define R367TER_EPQ_CFG 0xf038 +#define F367TER_EPQ_RANGE 0xf0380002 +#define F367TER_EPQ_SOFT 0xf0380001 + +/* EPQ_STATUS */ +#define R367TER_EPQ_STATUS 0xf039 +#define F367TER_SLOPE_INC 0xf03900fc +#define F367TER_TPS_FIELD 0xf0390003 + +/* AUTORELOCK */ +#define R367TER_AUTORELOCK 0xf03a +#define F367TER_BYPASS_BER_TEMPO 0xf03a0080 +#define F367TER_BER_TEMPO 0xf03a0070 +#define F367TER_BYPASS_COFDM_TEMPO 0xf03a0008 +#define F367TER_COFDM_TEMPO 0xf03a0007 + +/* BER_THR_VMSB */ +#define R367TER_BER_THR_VMSB 0xf03b +#define F367TER_BER_THRESHOLD_HI 0xf03b00ff + +/* BER_THR_MSB */ +#define R367TER_BER_THR_MSB 0xf03c +#define F367TER_BER_THRESHOLD_MID 0xf03c00ff + +/* BER_THR_LSB */ +#define R367TER_BER_THR_LSB 0xf03d +#define F367TER_BER_THRESHOLD_LO 0xf03d00ff + +/* CCD */ +#define R367TER_CCD 0xf03e +#define F367TER_CCD_DETECTED 0xf03e0080 +#define F367TER_CCD_RESET 0xf03e0040 +#define F367TER_CCD_THRESHOLD 0xf03e000f + +/* SPECTR_CFG */ +#define R367TER_SPECTR_CFG 0xf03f +#define F367TER_SPECT_CFG 0xf03f0003 + +/* CONSTMU_MSB */ +#define R367TER_CONSTMU_MSB 0xf040 +#define F367TER_CONSTMU_FREEZE 0xf0400080 +#define F367TER_CONSTNU_FORCE_EN 0xf0400040 +#define F367TER_CONST_MU_MSB 0xf040003f + +/* CONSTMU_LSB */ +#define R367TER_CONSTMU_LSB 0xf041 +#define F367TER_CONST_MU_LSB 0xf04100ff + +/* CONSTMU_MAX_MSB */ +#define R367TER_CONSTMU_MAX_MSB 0xf042 +#define F367TER_CONST_MU_MAX_MSB 0xf042003f + +/* CONSTMU_MAX_LSB */ +#define R367TER_CONSTMU_MAX_LSB 0xf043 +#define F367TER_CONST_MU_MAX_LSB 0xf04300ff + +/* ALPHANOISE */ +#define R367TER_ALPHANOISE 0xf044 +#define F367TER_USE_ALLFILTER 0xf0440080 +#define F367TER_INTER_ON 0xf0440040 +#define F367TER_ALPHA_NOISE 0xf044001f + +/* MAXGP_MSB */ +#define R367TER_MAXGP_MSB 0xf045 +#define F367TER_MUFILTER_LENGTH 0xf04500f0 +#define F367TER_MAX_GP_MSB 0xf045000f + +/* MAXGP_LSB */ +#define R367TER_MAXGP_LSB 0xf046 +#define F367TER_MAX_GP_LSB 0xf04600ff + +/* ALPHAMSB */ +#define R367TER_ALPHAMSB 0xf047 +#define F367TER_CHC_DATARATE 0xf04700c0 +#define F367TER_ALPHA_MSB 0xf047003f + +/* ALPHALSB */ +#define R367TER_ALPHALSB 0xf048 +#define F367TER_ALPHA_LSB 0xf04800ff + +/* PILOT_ACCU */ +#define R367TER_PILOT_ACCU 0xf049 +#define F367TER_USE_SCAT4ADDAPT 0xf0490080 +#define F367TER_PILOT_ACC 0xf049001f + +/* PILOTMU_ACCU */ +#define R367TER_PILOTMU_ACCU 0xf04a +#define F367TER_DISCARD_BAD_SP 0xf04a0080 +#define F367TER_DISCARD_BAD_CP 0xf04a0040 +#define F367TER_PILOT_MU_ACCU 0xf04a001f + +/* FILT_CHANNEL_EST */ +#define R367TER_FILT_CHANNEL_EST 0xf04b +#define F367TER_USE_FILT_PILOT 0xf04b0080 +#define F367TER_FILT_CHANNEL 0xf04b007f + +/* ALPHA_NOPISE_FREQ */ +#define R367TER_ALPHA_NOPISE_FREQ 0xf04c +#define F367TER_NOISE_FREQ_FILT 0xf04c0040 +#define F367TER_ALPHA_NOISE_FREQ 0xf04c003f + +/* RATIO_PILOT */ +#define R367TER_RATIO_PILOT 0xf04d +#define F367TER_RATIO_MEAN_SP 0xf04d00f0 +#define F367TER_RATIO_MEAN_CP 0xf04d000f + +/* CHC_CTL */ +#define R367TER_CHC_CTL 0xf04e +#define F367TER_TRACK_EN 0xf04e0080 +#define F367TER_NOISE_NORM_EN 0xf04e0040 +#define F367TER_FORCE_CHC_RESET 0xf04e0020 +#define F367TER_SHORT_TIME 0xf04e0010 +#define F367TER_FORCE_STATE_EN 0xf04e0008 +#define F367TER_FORCE_STATE 0xf04e0007 + +/* EPQ_ADJUST */ +#define R367TER_EPQ_ADJUST 0xf04f +#define F367TER_ADJUST_SCAT_IND 0xf04f00c0 +#define F367TER_ONE_SYMBOL 0xf04f0010 +#define F367TER_EPQ_DECAY 0xf04f000e +#define F367TER_HOLD_SLOPE 0xf04f0001 + +/* EPQ_THRES */ +#define R367TER_EPQ_THRES 0xf050 +#define F367TER_EPQ_THR 0xf05000ff + +/* OMEGA_CTL */ +#define R367TER_OMEGA_CTL 0xf051 +#define F367TER_OMEGA_RST 0xf0510080 +#define F367TER_FREEZE_OMEGA 0xf0510040 +#define F367TER_OMEGA_SEL 0xf051003f + +/* GP_CTL */ +#define R367TER_GP_CTL 0xf052 +#define F367TER_CHC_STATE 0xf05200e0 +#define F367TER_FREEZE_GP 0xf0520010 +#define F367TER_GP_SEL 0xf052000f + +/* MUMSB */ +#define R367TER_MUMSB 0xf053 +#define F367TER_MU_MSB 0xf053007f + +/* MULSB */ +#define R367TER_MULSB 0xf054 +#define F367TER_MU_LSB 0xf05400ff + +/* GPMSB */ +#define R367TER_GPMSB 0xf055 +#define F367TER_CSI_THRESHOLD 0xf05500e0 +#define F367TER_GP_MSB 0xf055000f + +/* GPLSB */ +#define R367TER_GPLSB 0xf056 +#define F367TER_GP_LSB 0xf05600ff + +/* OMEGAMSB */ +#define R367TER_OMEGAMSB 0xf057 +#define F367TER_OMEGA_MSB 0xf057007f + +/* OMEGALSB */ +#define R367TER_OMEGALSB 0xf058 +#define F367TER_OMEGA_LSB 0xf05800ff + +/* SCAT_NB */ +#define R367TER_SCAT_NB 0xf059 +#define F367TER_CHC_TEST 0xf05900f8 +#define F367TER_SCAT_NUMB 0xf0590003 + +/* CHC_DUMMY */ +#define R367TER_CHC_DUMMY 0xf05a +#define F367TER_CHC_DUM 0xf05a00ff + +/* INC_CTL */ +#define R367TER_INC_CTL 0xf05b +#define F367TER_INC_BYPASS 0xf05b0080 +#define F367TER_INC_NDEPTH 0xf05b000c +#define F367TER_INC_MADEPTH 0xf05b0003 + +/* INCTHRES_COR1 */ +#define R367TER_INCTHRES_COR1 0xf05c +#define F367TER_INC_THRES_COR1 0xf05c00ff + +/* INCTHRES_COR2 */ +#define R367TER_INCTHRES_COR2 0xf05d +#define F367TER_INC_THRES_COR2 0xf05d00ff + +/* INCTHRES_DET1 */ +#define R367TER_INCTHRES_DET1 0xf05e +#define F367TER_INC_THRES_DET1 0xf05e003f + +/* INCTHRES_DET2 */ +#define R367TER_INCTHRES_DET2 0xf05f +#define F367TER_INC_THRES_DET2 0xf05f003f + +/* IIR_CELLNB */ +#define R367TER_IIR_CELLNB 0xf060 +#define F367TER_NRST_IIR 0xf0600080 +#define F367TER_IIR_CELL_NB 0xf0600007 + +/* IIRCX_COEFF1_MSB */ +#define R367TER_IIRCX_COEFF1_MSB 0xf061 +#define F367TER_IIR_CX_COEFF1_MSB 0xf06100ff + +/* IIRCX_COEFF1_LSB */ +#define R367TER_IIRCX_COEFF1_LSB 0xf062 +#define F367TER_IIR_CX_COEFF1_LSB 0xf06200ff + +/* IIRCX_COEFF2_MSB */ +#define R367TER_IIRCX_COEFF2_MSB 0xf063 +#define F367TER_IIR_CX_COEFF2_MSB 0xf06300ff + +/* IIRCX_COEFF2_LSB */ +#define R367TER_IIRCX_COEFF2_LSB 0xf064 +#define F367TER_IIR_CX_COEFF2_LSB 0xf06400ff + +/* IIRCX_COEFF3_MSB */ +#define R367TER_IIRCX_COEFF3_MSB 0xf065 +#define F367TER_IIR_CX_COEFF3_MSB 0xf06500ff + +/* IIRCX_COEFF3_LSB */ +#define R367TER_IIRCX_COEFF3_LSB 0xf066 +#define F367TER_IIR_CX_COEFF3_LSB 0xf06600ff + +/* IIRCX_COEFF4_MSB */ +#define R367TER_IIRCX_COEFF4_MSB 0xf067 +#define F367TER_IIR_CX_COEFF4_MSB 0xf06700ff + +/* IIRCX_COEFF4_LSB */ +#define R367TER_IIRCX_COEFF4_LSB 0xf068 +#define F367TER_IIR_CX_COEFF4_LSB 0xf06800ff + +/* IIRCX_COEFF5_MSB */ +#define R367TER_IIRCX_COEFF5_MSB 0xf069 +#define F367TER_IIR_CX_COEFF5_MSB 0xf06900ff + +/* IIRCX_COEFF5_LSB */ +#define R367TER_IIRCX_COEFF5_LSB 0xf06a +#define F367TER_IIR_CX_COEFF5_LSB 0xf06a00ff + +/* FEPATH_CFG */ +#define R367TER_FEPATH_CFG 0xf06b +#define F367TER_DEMUX_SWAP 0xf06b0004 +#define F367TER_DIGAGC_SWAP 0xf06b0002 +#define F367TER_LONGPATH_IF 0xf06b0001 + +/* PMC1_FUNC */ +#define R367TER_PMC1_FUNC 0xf06c +#define F367TER_SOFT_RSTN 0xf06c0080 +#define F367TER_PMC1_AVERAGE_TIME 0xf06c0078 +#define F367TER_PMC1_WAIT_TIME 0xf06c0006 +#define F367TER_PMC1_2N_SEL 0xf06c0001 + +/* PMC1_FOR */ +#define R367TER_PMC1_FOR 0xf06d +#define F367TER_PMC1_FORCE 0xf06d0080 +#define F367TER_PMC1_FORCE_VALUE 0xf06d007c + +/* PMC2_FUNC */ +#define R367TER_PMC2_FUNC 0xf06e +#define F367TER_PMC2_SOFT_STN 0xf06e0080 +#define F367TER_PMC2_ACCU_TIME 0xf06e0070 +#define F367TER_PMC2_CMDP_MN 0xf06e0008 +#define F367TER_PMC2_SWAP 0xf06e0004 + +/* STATUS_ERR_DA */ +#define R367TER_STATUS_ERR_DA 0xf06f +#define F367TER_COM_USEGAINTRK 0xf06f0080 +#define F367TER_COM_AGCLOCK 0xf06f0040 +#define F367TER_AUT_AGCLOCK 0xf06f0020 +#define F367TER_MIN_ERR_X_LSB 0xf06f000f + +/* DIG_AGC_R */ +#define R367TER_DIG_AGC_R 0xf070 +#define F367TER_COM_SOFT_RSTN 0xf0700080 +#define F367TER_COM_AGC_ON 0xf0700040 +#define F367TER_COM_EARLY 0xf0700020 +#define F367TER_AUT_SOFT_RESETN 0xf0700010 +#define F367TER_AUT_AGC_ON 0xf0700008 +#define F367TER_AUT_EARLY 0xf0700004 +#define F367TER_AUT_ROT_EN 0xf0700002 +#define F367TER_LOCK_SOFT_RESETN 0xf0700001 + +/* COMAGC_TARMSB */ +#define R367TER_COMAGC_TARMSB 0xf071 +#define F367TER_COM_AGC_TARGET_MSB 0xf07100ff + +/* COM_AGC_TAR_ENMODE */ +#define R367TER_COM_AGC_TAR_ENMODE 0xf072 +#define F367TER_COM_AGC_TARGET_LSB 0xf07200f0 +#define F367TER_COM_ENMODE 0xf072000f + +/* COM_AGC_CFG */ +#define R367TER_COM_AGC_CFG 0xf073 +#define F367TER_COM_N 0xf07300f8 +#define F367TER_COM_STABMODE 0xf0730006 +#define F367TER_ERR_SEL 0xf0730001 + +/* COM_AGC_GAIN1 */ +#define R367TER_COM_AGC_GAIN1 0xf074 +#define F367TER_COM_GAIN1aCK 0xf07400f0 +#define F367TER_COM_GAIN1TRK 0xf074000f + +/* AUT_AGC_TARGETMSB */ +#define R367TER_AUT_AGC_TARGETMSB 0xf075 +#define F367TER_AUT_AGC_TARGET_MSB 0xf07500ff + +/* LOCK_DET_MSB */ +#define R367TER_LOCK_DET_MSB 0xf076 +#define F367TER_LOCK_DETECT_MSB 0xf07600ff + +/* AGCTAR_LOCK_LSBS */ +#define R367TER_AGCTAR_LOCK_LSBS 0xf077 +#define F367TER_AUT_AGC_TARGET_LSB 0xf07700f0 +#define F367TER_LOCK_DETECT_LSB 0xf077000f + +/* AUT_GAIN_EN */ +#define R367TER_AUT_GAIN_EN 0xf078 +#define F367TER_AUT_ENMODE 0xf07800f0 +#define F367TER_AUT_GAIN2 0xf078000f + +/* AUT_CFG */ +#define R367TER_AUT_CFG 0xf079 +#define F367TER_AUT_N 0xf07900f8 +#define F367TER_INT_CHOICE 0xf0790006 +#define F367TER_INT_LOAD 0xf0790001 + +/* LOCKN */ +#define R367TER_LOCKN 0xf07a +#define F367TER_LOCK_N 0xf07a00f8 +#define F367TER_SEL_IQNTAR 0xf07a0004 +#define F367TER_LOCK_DETECT_CHOICE 0xf07a0003 + +/* INT_X_3 */ +#define R367TER_INT_X_3 0xf07b +#define F367TER_INT_X3 0xf07b00ff + +/* INT_X_2 */ +#define R367TER_INT_X_2 0xf07c +#define F367TER_INT_X2 0xf07c00ff + +/* INT_X_1 */ +#define R367TER_INT_X_1 0xf07d +#define F367TER_INT_X1 0xf07d00ff + +/* INT_X_0 */ +#define R367TER_INT_X_0 0xf07e +#define F367TER_INT_X0 0xf07e00ff + +/* MIN_ERRX_MSB */ +#define R367TER_MIN_ERRX_MSB 0xf07f +#define F367TER_MIN_ERR_X_MSB 0xf07f00ff + +/* COR_CTL */ +#define R367TER_COR_CTL 0xf080 +#define F367TER_CORE_ACTIVE 0xf0800020 +#define F367TER_HOLD 0xf0800010 +#define F367TER_CORE_STATE_CTL 0xf080000f + +/* COR_STAT */ +#define R367TER_COR_STAT 0xf081 +#define F367TER_SCATT_LOCKED 0xf0810080 +#define F367TER_TPS_LOCKED 0xf0810040 +#define F367TER_SYR_LOCKED_COR 0xf0810020 +#define F367TER_AGC_LOCKED_STAT 0xf0810010 +#define F367TER_CORE_STATE_STAT 0xf081000f + +/* COR_INTEN */ +#define R367TER_COR_INTEN 0xf082 +#define F367TER_INTEN 0xf0820080 +#define F367TER_INTEN_SYR 0xf0820020 +#define F367TER_INTEN_FFT 0xf0820010 +#define F367TER_INTEN_AGC 0xf0820008 +#define F367TER_INTEN_TPS1 0xf0820004 +#define F367TER_INTEN_TPS2 0xf0820002 +#define F367TER_INTEN_TPS3 0xf0820001 + +/* COR_INTSTAT */ +#define R367TER_COR_INTSTAT 0xf083 +#define F367TER_INTSTAT_SYR 0xf0830020 +#define F367TER_INTSTAT_FFT 0xf0830010 +#define F367TER_INTSAT_AGC 0xf0830008 +#define F367TER_INTSTAT_TPS1 0xf0830004 +#define F367TER_INTSTAT_TPS2 0xf0830002 +#define F367TER_INTSTAT_TPS3 0xf0830001 + +/* COR_MODEGUARD */ +#define R367TER_COR_MODEGUARD 0xf084 +#define F367TER_FORCE 0xf0840010 +#define F367TER_MODE 0xf084000c +#define F367TER_GUARD 0xf0840003 + +/* AGC_CTL */ +#define R367TER_AGC_CTL 0xf085 +#define F367TER_AGC_TIMING_FACTOR 0xf08500e0 +#define F367TER_AGC_LAST 0xf0850010 +#define F367TER_AGC_GAIN 0xf085000c +#define F367TER_AGC_NEG 0xf0850002 +#define F367TER_AGC_SET 0xf0850001 + +/* AGC_MANUAL1 */ +#define R367TER_AGC_MANUAL1 0xf086 +#define F367TER_AGC_VAL_LO 0xf08600ff + +/* AGC_MANUAL2 */ +#define R367TER_AGC_MANUAL2 0xf087 +#define F367TER_AGC_VAL_HI 0xf087000f + +/* AGC_TARG */ +#define R367TER_AGC_TARG 0xf088 +#define F367TER_AGC_TARGET 0xf08800ff + +/* AGC_GAIN1 */ +#define R367TER_AGC_GAIN1 0xf089 +#define F367TER_AGC_GAIN_LO 0xf08900ff + +/* AGC_GAIN2 */ +#define R367TER_AGC_GAIN2 0xf08a +#define F367TER_AGC_LOCKED_GAIN2 0xf08a0010 +#define F367TER_AGC_GAIN_HI 0xf08a000f + +/* RESERVED_1 */ +#define R367TER_RESERVED_1 0xf08b +#define F367TER_RESERVED1 0xf08b00ff + +/* RESERVED_2 */ +#define R367TER_RESERVED_2 0xf08c +#define F367TER_RESERVED2 0xf08c00ff + +/* RESERVED_3 */ +#define R367TER_RESERVED_3 0xf08d +#define F367TER_RESERVED3 0xf08d00ff + +/* CAS_CTL */ +#define R367TER_CAS_CTL 0xf08e +#define F367TER_CCS_ENABLE 0xf08e0080 +#define F367TER_ACS_DISABLE 0xf08e0040 +#define F367TER_DAGC_DIS 0xf08e0020 +#define F367TER_DAGC_GAIN 0xf08e0018 +#define F367TER_CCSMU 0xf08e0007 + +/* CAS_FREQ */ +#define R367TER_CAS_FREQ 0xf08f +#define F367TER_CCS_FREQ 0xf08f00ff + +/* CAS_DAGCGAIN */ +#define R367TER_CAS_DAGCGAIN 0xf090 +#define F367TER_CAS_DAGC_GAIN 0xf09000ff + +/* SYR_CTL */ +#define R367TER_SYR_CTL 0xf091 +#define F367TER_SICTH_ENABLE 0xf0910080 +#define F367TER_LONG_ECHO 0xf0910078 +#define F367TER_AUTO_LE_EN 0xf0910004 +#define F367TER_SYR_BYPASS 0xf0910002 +#define F367TER_SYR_TR_DIS 0xf0910001 + +/* SYR_STAT */ +#define R367TER_SYR_STAT 0xf092 +#define F367TER_SYR_LOCKED_STAT 0xf0920010 +#define F367TER_SYR_MODE 0xf092000c +#define F367TER_SYR_GUARD 0xf0920003 + +/* SYR_NCO1 */ +#define R367TER_SYR_NCO1 0xf093 +#define F367TER_SYR_NCO_LO 0xf09300ff + +/* SYR_NCO2 */ +#define R367TER_SYR_NCO2 0xf094 +#define F367TER_SYR_NCO_HI 0xf094003f + +/* SYR_OFFSET1 */ +#define R367TER_SYR_OFFSET1 0xf095 +#define F367TER_SYR_OFFSET_LO 0xf09500ff + +/* SYR_OFFSET2 */ +#define R367TER_SYR_OFFSET2 0xf096 +#define F367TER_SYR_OFFSET_HI 0xf096003f + +/* FFT_CTL */ +#define R367TER_FFT_CTL 0xf097 +#define F367TER_SHIFT_FFT_TRIG 0xf0970018 +#define F367TER_FFT_TRIGGER 0xf0970004 +#define F367TER_FFT_MANUAL 0xf0970002 +#define F367TER_IFFT_MODE 0xf0970001 + +/* SCR_CTL */ +#define R367TER_SCR_CTL 0xf098 +#define F367TER_SYRADJDECAY 0xf0980070 +#define F367TER_SCR_CPEDIS 0xf0980002 +#define F367TER_SCR_DIS 0xf0980001 + +/* PPM_CTL1 */ +#define R367TER_PPM_CTL1 0xf099 +#define F367TER_PPM_MAXFREQ 0xf0990030 +#define F367TER_PPM_MAXTIM 0xf0990008 +#define F367TER_PPM_INVSEL 0xf0990004 +#define F367TER_PPM_SCATDIS 0xf0990002 +#define F367TER_PPM_BYP 0xf0990001 + +/* TRL_CTL */ +#define R367TER_TRL_CTL 0xf09a +#define F367TER_TRL_NOMRATE_LSB 0xf09a0080 +#define F367TER_TRL_GAIN_FACTOR 0xf09a0078 +#define F367TER_TRL_LOOPGAIN 0xf09a0007 + +/* TRL_NOMRATE1 */ +#define R367TER_TRL_NOMRATE1 0xf09b +#define F367TER_TRL_NOMRATE_LO 0xf09b00ff + +/* TRL_NOMRATE2 */ +#define R367TER_TRL_NOMRATE2 0xf09c +#define F367TER_TRL_NOMRATE_HI 0xf09c00ff + +/* TRL_TIME1 */ +#define R367TER_TRL_TIME1 0xf09d +#define F367TER_TRL_TOFFSET_LO 0xf09d00ff + +/* TRL_TIME2 */ +#define R367TER_TRL_TIME2 0xf09e +#define F367TER_TRL_TOFFSET_HI 0xf09e00ff + +/* CRL_CTL */ +#define R367TER_CRL_CTL 0xf09f +#define F367TER_CRL_DIS 0xf09f0080 +#define F367TER_CRL_GAIN_FACTOR 0xf09f0078 +#define F367TER_CRL_LOOPGAIN 0xf09f0007 + +/* CRL_FREQ1 */ +#define R367TER_CRL_FREQ1 0xf0a0 +#define F367TER_CRL_FOFFSET_LO 0xf0a000ff + +/* CRL_FREQ2 */ +#define R367TER_CRL_FREQ2 0xf0a1 +#define F367TER_CRL_FOFFSET_HI 0xf0a100ff + +/* CRL_FREQ3 */ +#define R367TER_CRL_FREQ3 0xf0a2 +#define F367TER_CRL_FOFFSET_VHI 0xf0a200ff + +/* TPS_SFRAME_CTL */ +#define R367TER_TPS_SFRAME_CTL 0xf0a3 +#define F367TER_TPS_SFRAME_SYNC 0xf0a30001 + +/* CHC_SNR */ +#define R367TER_CHC_SNR 0xf0a4 +#define F367TER_CHCSNR 0xf0a400ff + +/* BDI_CTL */ +#define R367TER_BDI_CTL 0xf0a5 +#define F367TER_BDI_LPSEL 0xf0a50002 +#define F367TER_BDI_SERIAL 0xf0a50001 + +/* DMP_CTL */ +#define R367TER_DMP_CTL 0xf0a6 +#define F367TER_DMP_SCALING_FACTOR 0xf0a6001e +#define F367TER_DMP_SDDIS 0xf0a60001 + +/* TPS_RCVD1 */ +#define R367TER_TPS_RCVD1 0xf0a7 +#define F367TER_TPS_CHANGE 0xf0a70040 +#define F367TER_BCH_OK 0xf0a70020 +#define F367TER_TPS_SYNC 0xf0a70010 +#define F367TER_TPS_FRAME 0xf0a70003 + +/* TPS_RCVD2 */ +#define R367TER_TPS_RCVD2 0xf0a8 +#define F367TER_TPS_HIERMODE 0xf0a80070 +#define F367TER_TPS_CONST 0xf0a80003 + +/* TPS_RCVD3 */ +#define R367TER_TPS_RCVD3 0xf0a9 +#define F367TER_TPS_LPCODE 0xf0a90070 +#define F367TER_TPS_HPCODE 0xf0a90007 + +/* TPS_RCVD4 */ +#define R367TER_TPS_RCVD4 0xf0aa +#define F367TER_TPS_GUARD 0xf0aa0030 +#define F367TER_TPS_MODE 0xf0aa0003 + +/* TPS_ID_CELL1 */ +#define R367TER_TPS_ID_CELL1 0xf0ab +#define F367TER_TPS_ID_CELL_LO 0xf0ab00ff + +/* TPS_ID_CELL2 */ +#define R367TER_TPS_ID_CELL2 0xf0ac +#define F367TER_TPS_ID_CELL_HI 0xf0ac00ff + +/* TPS_RCVD5_SET1 */ +#define R367TER_TPS_RCVD5_SET1 0xf0ad +#define F367TER_TPS_NA 0xf0ad00fC +#define F367TER_TPS_SETFRAME 0xf0ad0003 + +/* TPS_SET2 */ +#define R367TER_TPS_SET2 0xf0ae +#define F367TER_TPS_SETHIERMODE 0xf0ae0070 +#define F367TER_TPS_SETCONST 0xf0ae0003 + +/* TPS_SET3 */ +#define R367TER_TPS_SET3 0xf0af +#define F367TER_TPS_SETLPCODE 0xf0af0070 +#define F367TER_TPS_SETHPCODE 0xf0af0007 + +/* TPS_CTL */ +#define R367TER_TPS_CTL 0xf0b0 +#define F367TER_TPS_IMM 0xf0b00004 +#define F367TER_TPS_BCHDIS 0xf0b00002 +#define F367TER_TPS_UPDDIS 0xf0b00001 + +/* CTL_FFTOSNUM */ +#define R367TER_CTL_FFTOSNUM 0xf0b1 +#define F367TER_SYMBOL_NUMBER 0xf0b1007f + +/* TESTSELECT */ +#define R367TER_TESTSELECT 0xf0b2 +#define F367TER_TEST_SELECT 0xf0b2001f + +/* MSC_REV */ +#define R367TER_MSC_REV 0xf0b3 +#define F367TER_REV_NUMBER 0xf0b300ff + +/* PIR_CTL */ +#define R367TER_PIR_CTL 0xf0b4 +#define F367TER_FREEZE 0xf0b40001 + +/* SNR_CARRIER1 */ +#define R367TER_SNR_CARRIER1 0xf0b5 +#define F367TER_SNR_CARRIER_LO 0xf0b500ff + +/* SNR_CARRIER2 */ +#define R367TER_SNR_CARRIER2 0xf0b6 +#define F367TER_MEAN 0xf0b600c0 +#define F367TER_SNR_CARRIER_HI 0xf0b6001f + +/* PPM_CPAMP */ +#define R367TER_PPM_CPAMP 0xf0b7 +#define F367TER_PPM_CPC 0xf0b700ff + +/* TSM_AP0 */ +#define R367TER_TSM_AP0 0xf0b8 +#define F367TER_ADDRESS_BYTE_0 0xf0b800ff + +/* TSM_AP1 */ +#define R367TER_TSM_AP1 0xf0b9 +#define F367TER_ADDRESS_BYTE_1 0xf0b900ff + +/* TSM_AP2 */ +#define R367TER_TSM_AP2 0xf0bA +#define F367TER_DATA_BYTE_0 0xf0ba00ff + +/* TSM_AP3 */ +#define R367TER_TSM_AP3 0xf0bB +#define F367TER_DATA_BYTE_1 0xf0bb00ff + +/* TSM_AP4 */ +#define R367TER_TSM_AP4 0xf0bC +#define F367TER_DATA_BYTE_2 0xf0bc00ff + +/* TSM_AP5 */ +#define R367TER_TSM_AP5 0xf0bD +#define F367TER_DATA_BYTE_3 0xf0bd00ff + +/* TSM_AP6 */ +#define R367TER_TSM_AP6 0xf0bE +#define F367TER_TSM_AP_6 0xf0be00ff + +/* TSM_AP7 */ +#define R367TER_TSM_AP7 0xf0bF +#define F367TER_MEM_SELECT_BYTE 0xf0bf00ff + +/* TSTRES */ +#define R367TER_TSTRES 0xf0c0 +#define F367TER_FRES_DISPLAY 0xf0c00080 +#define F367TER_FRES_FIFO_AD 0xf0c00020 +#define F367TER_FRESRS 0xf0c00010 +#define F367TER_FRESACS 0xf0c00008 +#define F367TER_FRESFEC 0xf0c00004 +#define F367TER_FRES_PRIF 0xf0c00002 +#define F367TER_FRESCORE 0xf0c00001 + +/* ANACTRL */ +#define R367TER_ANACTRL 0xf0c1 +#define F367TER_BYPASS_XTAL 0xf0c10040 +#define F367TER_BYPASS_PLLXN 0xf0c1000c +#define F367TER_DIS_PAD_OSC 0xf0c10002 +#define F367TER_STDBY_PLLXN 0xf0c10001 + +/* TSTBUS */ +#define R367TER_TSTBUS 0xf0c2 +#define F367TER_TS_BYTE_CLK_INV 0xf0c20080 +#define F367TER_CFG_IP 0xf0c20070 +#define F367TER_CFG_TST 0xf0c2000f + +/* TSTRATE */ +#define R367TER_TSTRATE 0xf0c6 +#define F367TER_FORCEPHA 0xf0c60080 +#define F367TER_FNEWPHA 0xf0c60010 +#define F367TER_FROT90 0xf0c60008 +#define F367TER_FR 0xf0c60007 + +/* CONSTMODE */ +#define R367TER_CONSTMODE 0xf0cb +#define F367TER_TST_PRIF 0xf0cb00e0 +#define F367TER_CAR_TYPE 0xf0cb0018 +#define F367TER_CONST_MODE 0xf0cb0003 + +/* CONSTCARR1 */ +#define R367TER_CONSTCARR1 0xf0cc +#define F367TER_CONST_CARR_LO 0xf0cc00ff + +/* CONSTCARR2 */ +#define R367TER_CONSTCARR2 0xf0cd +#define F367TER_CONST_CARR_HI 0xf0cd001f + +/* ICONSTEL */ +#define R367TER_ICONSTEL 0xf0ce +#define F367TER_PICONSTEL 0xf0ce00ff + +/* QCONSTEL */ +#define R367TER_QCONSTEL 0xf0cf +#define F367TER_PQCONSTEL 0xf0cf00ff + +/* TSTBISTRES0 */ +#define R367TER_TSTBISTRES0 0xf0d0 +#define F367TER_BEND_PPM 0xf0d00080 +#define F367TER_BBAD_PPM 0xf0d00040 +#define F367TER_BEND_FFTW 0xf0d00020 +#define F367TER_BBAD_FFTW 0xf0d00010 +#define F367TER_BEND_FFT_BUF 0xf0d00008 +#define F367TER_BBAD_FFT_BUF 0xf0d00004 +#define F367TER_BEND_SYR 0xf0d00002 +#define F367TER_BBAD_SYR 0xf0d00001 + +/* TSTBISTRES1 */ +#define R367TER_TSTBISTRES1 0xf0d1 +#define F367TER_BEND_CHC_CP 0xf0d10080 +#define F367TER_BBAD_CHC_CP 0xf0d10040 +#define F367TER_BEND_CHCI 0xf0d10020 +#define F367TER_BBAD_CHCI 0xf0d10010 +#define F367TER_BEND_BDI 0xf0d10008 +#define F367TER_BBAD_BDI 0xf0d10004 +#define F367TER_BEND_SDI 0xf0d10002 +#define F367TER_BBAD_SDI 0xf0d10001 + +/* TSTBISTRES2 */ +#define R367TER_TSTBISTRES2 0xf0d2 +#define F367TER_BEND_CHC_INC 0xf0d20080 +#define F367TER_BBAD_CHC_INC 0xf0d20040 +#define F367TER_BEND_CHC_SPP 0xf0d20020 +#define F367TER_BBAD_CHC_SPP 0xf0d20010 +#define F367TER_BEND_CHC_CPP 0xf0d20008 +#define F367TER_BBAD_CHC_CPP 0xf0d20004 +#define F367TER_BEND_CHC_SP 0xf0d20002 +#define F367TER_BBAD_CHC_SP 0xf0d20001 + +/* TSTBISTRES3 */ +#define R367TER_TSTBISTRES3 0xf0d3 +#define F367TER_BEND_QAM 0xf0d30080 +#define F367TER_BBAD_QAM 0xf0d30040 +#define F367TER_BEND_SFEC_VIT 0xf0d30020 +#define F367TER_BBAD_SFEC_VIT 0xf0d30010 +#define F367TER_BEND_SFEC_DLINE 0xf0d30008 +#define F367TER_BBAD_SFEC_DLINE 0xf0d30004 +#define F367TER_BEND_SFEC_HW 0xf0d30002 +#define F367TER_BBAD_SFEC_HW 0xf0d30001 + +/* RF_AGC1 */ +#define R367TER_RF_AGC1 0xf0d4 +#define F367TER_RF_AGC1_LEVEL_HI 0xf0d400ff + +/* RF_AGC2 */ +#define R367TER_RF_AGC2 0xf0d5 +#define F367TER_REF_ADGP 0xf0d50080 +#define F367TER_STDBY_ADCGP 0xf0d50020 +#define F367TER_CHANNEL_SEL 0xf0d5001c +#define F367TER_RF_AGC1_LEVEL_LO 0xf0d50003 + +/* ANADIGCTRL */ +#define R367TER_ANADIGCTRL 0xf0d7 +#define F367TER_SEL_CLKDEM 0xf0d70020 +#define F367TER_EN_BUFFER_Q 0xf0d70010 +#define F367TER_EN_BUFFER_I 0xf0d70008 +#define F367TER_ADC_RIS_EGDE 0xf0d70004 +#define F367TER_SGN_ADC 0xf0d70002 +#define F367TER_SEL_AD12_SYNC 0xf0d70001 + +/* PLLMDIV */ +#define R367TER_PLLMDIV 0xf0d8 +#define F367TER_PLL_MDIV 0xf0d800ff + +/* PLLNDIV */ +#define R367TER_PLLNDIV 0xf0d9 +#define F367TER_PLL_NDIV 0xf0d900ff + +/* PLLSETUP */ +#define R367TER_PLLSETUP 0xf0dA +#define F367TER_PLL_PDIV 0xf0da0070 +#define F367TER_PLL_KDIV 0xf0da000f + +/* DUAL_AD12 */ +#define R367TER_DUAL_AD12 0xf0dB +#define F367TER_FS20M 0xf0db0020 +#define F367TER_FS50M 0xf0db0010 +#define F367TER_INMODe0 0xf0db0008 +#define F367TER_POFFQ 0xf0db0004 +#define F367TER_POFFI 0xf0db0002 +#define F367TER_INMODE1 0xf0db0001 + +/* TSTBIST */ +#define R367TER_TSTBIST 0xf0dC +#define F367TER_TST_BYP_CLK 0xf0dc0080 +#define F367TER_TST_GCLKENA_STD 0xf0dc0040 +#define F367TER_TST_GCLKENA 0xf0dc0020 +#define F367TER_TST_MEMBIST 0xf0dc001f + +/* PAD_COMP_CTRL */ +#define R367TER_PAD_COMP_CTRL 0xf0dD +#define F367TER_COMPTQ 0xf0dd0010 +#define F367TER_COMPEN 0xf0dd0008 +#define F367TER_FREEZE2 0xf0dd0004 +#define F367TER_SLEEP_INHBT 0xf0dd0002 +#define F367TER_CHIP_SLEEP 0xf0dd0001 + +/* PAD_COMP_WR */ +#define R367TER_PAD_COMP_WR 0xf0de +#define F367TER_WR_ASRC 0xf0de007f + +/* PAD_COMP_RD */ +#define R367TER_PAD_COMP_RD 0xf0df +#define F367TER_COMPOK 0xf0df0080 +#define F367TER_RD_ASRC 0xf0df007f + +/* SYR_TARGET_FFTADJT_MSB */ +#define R367TER_SYR_TARGET_FFTADJT_MSB 0xf100 +#define F367TER_SYR_START 0xf1000080 +#define F367TER_SYR_TARGET_FFTADJ_HI 0xf100000f + +/* SYR_TARGET_FFTADJT_LSB */ +#define R367TER_SYR_TARGET_FFTADJT_LSB 0xf101 +#define F367TER_SYR_TARGET_FFTADJ_LO 0xf10100ff + +/* SYR_TARGET_CHCADJT_MSB */ +#define R367TER_SYR_TARGET_CHCADJT_MSB 0xf102 +#define F367TER_SYR_TARGET_CHCADJ_HI 0xf102000f + +/* SYR_TARGET_CHCADJT_LSB */ +#define R367TER_SYR_TARGET_CHCADJT_LSB 0xf103 +#define F367TER_SYR_TARGET_CHCADJ_LO 0xf10300ff + +/* SYR_FLAG */ +#define R367TER_SYR_FLAG 0xf104 +#define F367TER_TRIG_FLG1 0xf1040080 +#define F367TER_TRIG_FLG0 0xf1040040 +#define F367TER_FFT_FLG1 0xf1040008 +#define F367TER_FFT_FLG0 0xf1040004 +#define F367TER_CHC_FLG1 0xf1040002 +#define F367TER_CHC_FLG0 0xf1040001 + +/* CRL_TARGET1 */ +#define R367TER_CRL_TARGET1 0xf105 +#define F367TER_CRL_START 0xf1050080 +#define F367TER_CRL_TARGET_VHI 0xf105000f + +/* CRL_TARGET2 */ +#define R367TER_CRL_TARGET2 0xf106 +#define F367TER_CRL_TARGET_HI 0xf10600ff + +/* CRL_TARGET3 */ +#define R367TER_CRL_TARGET3 0xf107 +#define F367TER_CRL_TARGET_LO 0xf10700ff + +/* CRL_TARGET4 */ +#define R367TER_CRL_TARGET4 0xf108 +#define F367TER_CRL_TARGET_VLO 0xf10800ff + +/* CRL_FLAG */ +#define R367TER_CRL_FLAG 0xf109 +#define F367TER_CRL_FLAG1 0xf1090002 +#define F367TER_CRL_FLAG0 0xf1090001 + +/* TRL_TARGET1 */ +#define R367TER_TRL_TARGET1 0xf10a +#define F367TER_TRL_TARGET_HI 0xf10a00ff + +/* TRL_TARGET2 */ +#define R367TER_TRL_TARGET2 0xf10b +#define F367TER_TRL_TARGET_LO 0xf10b00ff + +/* TRL_CHC */ +#define R367TER_TRL_CHC 0xf10c +#define F367TER_TRL_START 0xf10c0080 +#define F367TER_CHC_START 0xf10c0040 +#define F367TER_TRL_FLAG1 0xf10c0002 +#define F367TER_TRL_FLAG0 0xf10c0001 + +/* CHC_SNR_TARG */ +#define R367TER_CHC_SNR_TARG 0xf10d +#define F367TER_CHC_SNR_TARGET 0xf10d00ff + +/* TOP_TRACK */ +#define R367TER_TOP_TRACK 0xf10e +#define F367TER_TOP_START 0xf10e0080 +#define F367TER_FIRST_FLAG 0xf10e0070 +#define F367TER_TOP_FLAG1 0xf10e0008 +#define F367TER_TOP_FLAG0 0xf10e0004 +#define F367TER_CHC_FLAG1 0xf10e0002 +#define F367TER_CHC_FLAG0 0xf10e0001 + +/* TRACKER_FREE1 */ +#define R367TER_TRACKER_FREE1 0xf10f +#define F367TER_TRACKER_FREE_1 0xf10f00ff + +/* ERROR_CRL1 */ +#define R367TER_ERROR_CRL1 0xf110 +#define F367TER_ERROR_CRL_VHI 0xf11000ff + +/* ERROR_CRL2 */ +#define R367TER_ERROR_CRL2 0xf111 +#define F367TER_ERROR_CRL_HI 0xf11100ff + +/* ERROR_CRL3 */ +#define R367TER_ERROR_CRL3 0xf112 +#define F367TER_ERROR_CRL_LOI 0xf11200ff + +/* ERROR_CRL4 */ +#define R367TER_ERROR_CRL4 0xf113 +#define F367TER_ERROR_CRL_VLO 0xf11300ff + +/* DEC_NCO1 */ +#define R367TER_DEC_NCO1 0xf114 +#define F367TER_DEC_NCO_VHI 0xf11400ff + +/* DEC_NCO2 */ +#define R367TER_DEC_NCO2 0xf115 +#define F367TER_DEC_NCO_HI 0xf11500ff + +/* DEC_NCO3 */ +#define R367TER_DEC_NCO3 0xf116 +#define F367TER_DEC_NCO_LO 0xf11600ff + +/* SNR */ +#define R367TER_SNR 0xf117 +#define F367TER_SNRATIO 0xf11700ff + +/* SYR_FFTADJ1 */ +#define R367TER_SYR_FFTADJ1 0xf118 +#define F367TER_SYR_FFTADJ_HI 0xf11800ff + +/* SYR_FFTADJ2 */ +#define R367TER_SYR_FFTADJ2 0xf119 +#define F367TER_SYR_FFTADJ_LO 0xf11900ff + +/* SYR_CHCADJ1 */ +#define R367TER_SYR_CHCADJ1 0xf11a +#define F367TER_SYR_CHCADJ_HI 0xf11a00ff + +/* SYR_CHCADJ2 */ +#define R367TER_SYR_CHCADJ2 0xf11b +#define F367TER_SYR_CHCADJ_LO 0xf11b00ff + +/* SYR_OFF */ +#define R367TER_SYR_OFF 0xf11c +#define F367TER_SYR_OFFSET 0xf11c00ff + +/* PPM_OFFSET1 */ +#define R367TER_PPM_OFFSET1 0xf11d +#define F367TER_PPM_OFFSET_HI 0xf11d00ff + +/* PPM_OFFSET2 */ +#define R367TER_PPM_OFFSET2 0xf11e +#define F367TER_PPM_OFFSET_LO 0xf11e00ff + +/* TRACKER_FREE2 */ +#define R367TER_TRACKER_FREE2 0xf11f +#define F367TER_TRACKER_FREE_2 0xf11f00ff + +/* DEBG_LT10 */ +#define R367TER_DEBG_LT10 0xf120 +#define F367TER_DEBUG_LT10 0xf12000ff + +/* DEBG_LT11 */ +#define R367TER_DEBG_LT11 0xf121 +#define F367TER_DEBUG_LT11 0xf12100ff + +/* DEBG_LT12 */ +#define R367TER_DEBG_LT12 0xf122 +#define F367TER_DEBUG_LT12 0xf12200ff + +/* DEBG_LT13 */ +#define R367TER_DEBG_LT13 0xf123 +#define F367TER_DEBUG_LT13 0xf12300ff + +/* DEBG_LT14 */ +#define R367TER_DEBG_LT14 0xf124 +#define F367TER_DEBUG_LT14 0xf12400ff + +/* DEBG_LT15 */ +#define R367TER_DEBG_LT15 0xf125 +#define F367TER_DEBUG_LT15 0xf12500ff + +/* DEBG_LT16 */ +#define R367TER_DEBG_LT16 0xf126 +#define F367TER_DEBUG_LT16 0xf12600ff + +/* DEBG_LT17 */ +#define R367TER_DEBG_LT17 0xf127 +#define F367TER_DEBUG_LT17 0xf12700ff + +/* DEBG_LT18 */ +#define R367TER_DEBG_LT18 0xf128 +#define F367TER_DEBUG_LT18 0xf12800ff + +/* DEBG_LT19 */ +#define R367TER_DEBG_LT19 0xf129 +#define F367TER_DEBUG_LT19 0xf12900ff + +/* DEBG_LT1a */ +#define R367TER_DEBG_LT1A 0xf12a +#define F367TER_DEBUG_LT1A 0xf12a00ff + +/* DEBG_LT1b */ +#define R367TER_DEBG_LT1B 0xf12b +#define F367TER_DEBUG_LT1B 0xf12b00ff + +/* DEBG_LT1c */ +#define R367TER_DEBG_LT1C 0xf12c +#define F367TER_DEBUG_LT1C 0xf12c00ff + +/* DEBG_LT1D */ +#define R367TER_DEBG_LT1D 0xf12d +#define F367TER_DEBUG_LT1D 0xf12d00ff + +/* DEBG_LT1E */ +#define R367TER_DEBG_LT1E 0xf12e +#define F367TER_DEBUG_LT1E 0xf12e00ff + +/* DEBG_LT1F */ +#define R367TER_DEBG_LT1F 0xf12f +#define F367TER_DEBUG_LT1F 0xf12f00ff + +/* RCCFGH */ +#define R367TER_RCCFGH 0xf200 +#define F367TER_TSRCFIFO_DVBCI 0xf2000080 +#define F367TER_TSRCFIFO_SERIAL 0xf2000040 +#define F367TER_TSRCFIFO_DISABLE 0xf2000020 +#define F367TER_TSFIFO_2TORC 0xf2000010 +#define F367TER_TSRCFIFO_HSGNLOUT 0xf2000008 +#define F367TER_TSRCFIFO_ERRMODE 0xf2000006 +#define F367TER_RCCFGH_0 0xf2000001 + +/* RCCFGM */ +#define R367TER_RCCFGM 0xf201 +#define F367TER_TSRCFIFO_MANSPEED 0xf20100c0 +#define F367TER_TSRCFIFO_PERMDATA 0xf2010020 +#define F367TER_TSRCFIFO_NONEWSGNL 0xf2010010 +#define F367TER_RCBYTE_OVERSAMPLING 0xf201000e +#define F367TER_TSRCFIFO_INVDATA 0xf2010001 + +/* RCCFGL */ +#define R367TER_RCCFGL 0xf202 +#define F367TER_TSRCFIFO_BCLKDEL1cK 0xf20200c0 +#define F367TER_RCCFGL_5 0xf2020020 +#define F367TER_TSRCFIFO_DUTY50 0xf2020010 +#define F367TER_TSRCFIFO_NSGNL2dATA 0xf2020008 +#define F367TER_TSRCFIFO_DISSERMUX 0xf2020004 +#define F367TER_RCCFGL_1 0xf2020002 +#define F367TER_TSRCFIFO_STOPCKDIS 0xf2020001 + +/* RCINSDELH */ +#define R367TER_RCINSDELH 0xf203 +#define F367TER_TSRCDEL_SYNCBYTE 0xf2030080 +#define F367TER_TSRCDEL_XXHEADER 0xf2030040 +#define F367TER_TSRCDEL_BBHEADER 0xf2030020 +#define F367TER_TSRCDEL_DATAFIELD 0xf2030010 +#define F367TER_TSRCINSDEL_ISCR 0xf2030008 +#define F367TER_TSRCINSDEL_NPD 0xf2030004 +#define F367TER_TSRCINSDEL_RSPARITY 0xf2030002 +#define F367TER_TSRCINSDEL_CRC8 0xf2030001 + +/* RCINSDELM */ +#define R367TER_RCINSDELM 0xf204 +#define F367TER_TSRCINS_BBPADDING 0xf2040080 +#define F367TER_TSRCINS_BCHFEC 0xf2040040 +#define F367TER_TSRCINS_LDPCFEC 0xf2040020 +#define F367TER_TSRCINS_EMODCOD 0xf2040010 +#define F367TER_TSRCINS_TOKEN 0xf2040008 +#define F367TER_TSRCINS_XXXERR 0xf2040004 +#define F367TER_TSRCINS_MATYPE 0xf2040002 +#define F367TER_TSRCINS_UPL 0xf2040001 + +/* RCINSDELL */ +#define R367TER_RCINSDELL 0xf205 +#define F367TER_TSRCINS_DFL 0xf2050080 +#define F367TER_TSRCINS_SYNCD 0xf2050040 +#define F367TER_TSRCINS_BLOCLEN 0xf2050020 +#define F367TER_TSRCINS_SIGPCOUNT 0xf2050010 +#define F367TER_TSRCINS_FIFO 0xf2050008 +#define F367TER_TSRCINS_REALPACK 0xf2050004 +#define F367TER_TSRCINS_TSCONFIG 0xf2050002 +#define F367TER_TSRCINS_LATENCY 0xf2050001 + +/* RCSTATUS */ +#define R367TER_RCSTATUS 0xf206 +#define F367TER_TSRCFIFO_LINEOK 0xf2060080 +#define F367TER_TSRCFIFO_ERROR 0xf2060040 +#define F367TER_TSRCFIFO_DATA7 0xf2060020 +#define F367TER_RCSTATUS_4 0xf2060010 +#define F367TER_TSRCFIFO_DEMODSEL 0xf2060008 +#define F367TER_TSRC1FIFOSPEED_STORE 0xf2060004 +#define F367TER_RCSTATUS_1 0xf2060002 +#define F367TER_TSRCSERIAL_IMPOSSIBLE 0xf2060001 + +/* RCSPEED */ +#define R367TER_RCSPEED 0xf207 +#define F367TER_TSRCFIFO_OUTSPEED 0xf20700ff + +/* RCDEBUGM */ +#define R367TER_RCDEBUGM 0xf208 +#define F367TER_SD_UNSYNC 0xf2080080 +#define F367TER_ULFLOCK_DETECTM 0xf2080040 +#define F367TER_SUL_SELECTOS 0xf2080020 +#define F367TER_DILUL_NOSCRBLE 0xf2080010 +#define F367TER_NUL_SCRB 0xf2080008 +#define F367TER_UL_SCRB 0xf2080004 +#define F367TER_SCRAULBAD 0xf2080002 +#define F367TER_SCRAUL_UNSYNC 0xf2080001 + +/* RCDEBUGL */ +#define R367TER_RCDEBUGL 0xf209 +#define F367TER_RS_ERR 0xf2090080 +#define F367TER_LLFLOCK_DETECTM 0xf2090040 +#define F367TER_NOT_SUL_SELECTOS 0xf2090020 +#define F367TER_DILLL_NOSCRBLE 0xf2090010 +#define F367TER_NLL_SCRB 0xf2090008 +#define F367TER_LL_SCRB 0xf2090004 +#define F367TER_SCRALLBAD 0xf2090002 +#define F367TER_SCRALL_UNSYNC 0xf2090001 + +/* RCOBSCFG */ +#define R367TER_RCOBSCFG 0xf20a +#define F367TER_TSRCFIFO_OBSCFG 0xf20a00ff + +/* RCOBSM */ +#define R367TER_RCOBSM 0xf20b +#define F367TER_TSRCFIFO_OBSDATA_HI 0xf20b00ff + +/* RCOBSL */ +#define R367TER_RCOBSL 0xf20c +#define F367TER_TSRCFIFO_OBSDATA_LO 0xf20c00ff + +/* RCFECSPY */ +#define R367TER_RCFECSPY 0xf210 +#define F367TER_SPYRC_ENABLE 0xf2100080 +#define F367TER_RCNO_SYNCBYTE 0xf2100040 +#define F367TER_RCSERIAL_MODE 0xf2100020 +#define F367TER_RCUNUSUAL_PACKET 0xf2100010 +#define F367TER_BERRCMETER_DATAMODE 0xf210000c +#define F367TER_BERRCMETER_LMODE 0xf2100002 +#define F367TER_BERRCMETER_RESET 0xf2100001 + +/* RCFSPYCFG */ +#define R367TER_RCFSPYCFG 0xf211 +#define F367TER_FECSPYRC_INPUT 0xf21100c0 +#define F367TER_RCRST_ON_ERROR 0xf2110020 +#define F367TER_RCONE_SHOT 0xf2110010 +#define F367TER_RCI2C_MODE 0xf211000c +#define F367TER_SPYRC_HSTERESIS 0xf2110003 + +/* RCFSPYDATA */ +#define R367TER_RCFSPYDATA 0xf212 +#define F367TER_SPYRC_STUFFING 0xf2120080 +#define F367TER_RCNOERR_PKTJITTER 0xf2120040 +#define F367TER_SPYRC_CNULLPKT 0xf2120020 +#define F367TER_SPYRC_OUTDATA_MODE 0xf212001f + +/* RCFSPYOUT */ +#define R367TER_RCFSPYOUT 0xf213 +#define F367TER_FSPYRC_DIRECT 0xf2130080 +#define F367TER_RCFSPYOUT_6 0xf2130040 +#define F367TER_SPYRC_OUTDATA_BUS 0xf2130038 +#define F367TER_RCSTUFF_MODE 0xf2130007 + +/* RCFSTATUS */ +#define R367TER_RCFSTATUS 0xf214 +#define F367TER_SPYRC_ENDSIM 0xf2140080 +#define F367TER_RCVALID_SIM 0xf2140040 +#define F367TER_RCFOUND_SIGNAL 0xf2140020 +#define F367TER_RCDSS_SYNCBYTE 0xf2140010 +#define F367TER_RCRESULT_STATE 0xf214000f + +/* RCFGOODPACK */ +#define R367TER_RCFGOODPACK 0xf215 +#define F367TER_RCGOOD_PACKET 0xf21500ff + +/* RCFPACKCNT */ +#define R367TER_RCFPACKCNT 0xf216 +#define F367TER_RCPACKET_COUNTER 0xf21600ff + +/* RCFSPYMISC */ +#define R367TER_RCFSPYMISC 0xf217 +#define F367TER_RCLABEL_COUNTER 0xf21700ff + +/* RCFBERCPT4 */ +#define R367TER_RCFBERCPT4 0xf218 +#define F367TER_FBERRCMETER_CPT_MMMMSB 0xf21800ff + +/* RCFBERCPT3 */ +#define R367TER_RCFBERCPT3 0xf219 +#define F367TER_FBERRCMETER_CPT_MMMSB 0xf21900ff + +/* RCFBERCPT2 */ +#define R367TER_RCFBERCPT2 0xf21a +#define F367TER_FBERRCMETER_CPT_MMSB 0xf21a00ff + +/* RCFBERCPT1 */ +#define R367TER_RCFBERCPT1 0xf21b +#define F367TER_FBERRCMETER_CPT_MSB 0xf21b00ff + +/* RCFBERCPT0 */ +#define R367TER_RCFBERCPT0 0xf21c +#define F367TER_FBERRCMETER_CPT_LSB 0xf21c00ff + +/* RCFBERERR2 */ +#define R367TER_RCFBERERR2 0xf21d +#define F367TER_FBERRCMETER_ERR_HI 0xf21d00ff + +/* RCFBERERR1 */ +#define R367TER_RCFBERERR1 0xf21e +#define F367TER_FBERRCMETER_ERR 0xf21e00ff + +/* RCFBERERR0 */ +#define R367TER_RCFBERERR0 0xf21f +#define F367TER_FBERRCMETER_ERR_LO 0xf21f00ff + +/* RCFSTATESM */ +#define R367TER_RCFSTATESM 0xf220 +#define F367TER_RCRSTATE_F 0xf2200080 +#define F367TER_RCRSTATE_E 0xf2200040 +#define F367TER_RCRSTATE_D 0xf2200020 +#define F367TER_RCRSTATE_C 0xf2200010 +#define F367TER_RCRSTATE_B 0xf2200008 +#define F367TER_RCRSTATE_A 0xf2200004 +#define F367TER_RCRSTATE_9 0xf2200002 +#define F367TER_RCRSTATE_8 0xf2200001 + +/* RCFSTATESL */ +#define R367TER_RCFSTATESL 0xf221 +#define F367TER_RCRSTATE_7 0xf2210080 +#define F367TER_RCRSTATE_6 0xf2210040 +#define F367TER_RCRSTATE_5 0xf2210020 +#define F367TER_RCRSTATE_4 0xf2210010 +#define F367TER_RCRSTATE_3 0xf2210008 +#define F367TER_RCRSTATE_2 0xf2210004 +#define F367TER_RCRSTATE_1 0xf2210002 +#define F367TER_RCRSTATE_0 0xf2210001 + +/* RCFSPYBER */ +#define R367TER_RCFSPYBER 0xf222 +#define F367TER_RCFSPYBER_7 0xf2220080 +#define F367TER_SPYRCOBS_XORREAD 0xf2220040 +#define F367TER_FSPYRCBER_OBSMODE 0xf2220020 +#define F367TER_FSPYRCBER_SYNCBYT 0xf2220010 +#define F367TER_FSPYRCBER_UNSYNC 0xf2220008 +#define F367TER_FSPYRCBER_CTIME 0xf2220007 + +/* RCFSPYDISTM */ +#define R367TER_RCFSPYDISTM 0xf223 +#define F367TER_RCPKTTIME_DISTANCE_HI 0xf22300ff + +/* RCFSPYDISTL */ +#define R367TER_RCFSPYDISTL 0xf224 +#define F367TER_RCPKTTIME_DISTANCE_LO 0xf22400ff + +/* RCFSPYOBS7 */ +#define R367TER_RCFSPYOBS7 0xf228 +#define F367TER_RCSPYOBS_SPYFAIL 0xf2280080 +#define F367TER_RCSPYOBS_SPYFAIL1 0xf2280040 +#define F367TER_RCSPYOBS_ERROR 0xf2280020 +#define F367TER_RCSPYOBS_STROUT 0xf2280010 +#define F367TER_RCSPYOBS_RESULTSTATE1 0xf228000f + +/* RCFSPYOBS6 */ +#define R367TER_RCFSPYOBS6 0xf229 +#define F367TER_RCSPYOBS_RESULTSTATe0 0xf22900f0 +#define F367TER_RCSPYOBS_RESULTSTATEM1 0xf229000f + +/* RCFSPYOBS5 */ +#define R367TER_RCFSPYOBS5 0xf22a +#define F367TER_RCSPYOBS_BYTEOFPACKET1 0xf22a00ff + +/* RCFSPYOBS4 */ +#define R367TER_RCFSPYOBS4 0xf22b +#define F367TER_RCSPYOBS_BYTEVALUE1 0xf22b00ff + +/* RCFSPYOBS3 */ +#define R367TER_RCFSPYOBS3 0xf22c +#define F367TER_RCSPYOBS_DATA1 0xf22c00ff + +/* RCFSPYOBS2 */ +#define R367TER_RCFSPYOBS2 0xf22d +#define F367TER_RCSPYOBS_DATa0 0xf22d00ff + +/* RCFSPYOBS1 */ +#define R367TER_RCFSPYOBS1 0xf22e +#define F367TER_RCSPYOBS_DATAM1 0xf22e00ff + +/* RCFSPYOBS0 */ +#define R367TER_RCFSPYOBS0 0xf22f +#define F367TER_RCSPYOBS_DATAM2 0xf22f00ff + +/* TSGENERAL */ +#define R367TER_TSGENERAL 0xf230 +#define F367TER_TSGENERAL_7 0xf2300080 +#define F367TER_TSGENERAL_6 0xf2300040 +#define F367TER_TSFIFO_BCLK1aLL 0xf2300020 +#define F367TER_TSGENERAL_4 0xf2300010 +#define F367TER_MUXSTREAM_OUTMODE 0xf2300008 +#define F367TER_TSFIFO_PERMPARAL 0xf2300006 +#define F367TER_RST_REEDSOLO 0xf2300001 + +/* RC1SPEED */ +#define R367TER_RC1SPEED 0xf231 +#define F367TER_TSRCFIFO1_OUTSPEED 0xf23100ff + +/* TSGSTATUS */ +#define R367TER_TSGSTATUS 0xf232 +#define F367TER_TSGSTATUS_7 0xf2320080 +#define F367TER_TSGSTATUS_6 0xf2320040 +#define F367TER_RSMEM_FULL 0xf2320020 +#define F367TER_RS_MULTCALC 0xf2320010 +#define F367TER_RSIN_OVERTIME 0xf2320008 +#define F367TER_TSFIFO3_DEMODSEL 0xf2320004 +#define F367TER_TSFIFO2_DEMODSEL 0xf2320002 +#define F367TER_TSFIFO1_DEMODSEL 0xf2320001 + + +/* FECM */ +#define R367TER_FECM 0xf233 +#define F367TER_DSS_DVB 0xf2330080 +#define F367TER_DEMOD_BYPASS 0xf2330040 +#define F367TER_CMP_SLOWMODE 0xf2330020 +#define F367TER_DSS_SRCH 0xf2330010 +#define F367TER_FECM_3 0xf2330008 +#define F367TER_DIFF_MODEVIT 0xf2330004 +#define F367TER_SYNCVIT 0xf2330002 +#define F367TER_I2CSYM 0xf2330001 + +/* VTH12 */ +#define R367TER_VTH12 0xf234 +#define F367TER_VTH_12 0xf23400ff + +/* VTH23 */ +#define R367TER_VTH23 0xf235 +#define F367TER_VTH_23 0xf23500ff + +/* VTH34 */ +#define R367TER_VTH34 0xf236 +#define F367TER_VTH_34 0xf23600ff + +/* VTH56 */ +#define R367TER_VTH56 0xf237 +#define F367TER_VTH_56 0xf23700ff + +/* VTH67 */ +#define R367TER_VTH67 0xf238 +#define F367TER_VTH_67 0xf23800ff + +/* VTH78 */ +#define R367TER_VTH78 0xf239 +#define F367TER_VTH_78 0xf23900ff + +/* VITCURPUN */ +#define R367TER_VITCURPUN 0xf23a +#define F367TER_VIT_MAPPING 0xf23a00e0 +#define F367TER_VIT_CURPUN 0xf23a001f + +/* VERROR */ +#define R367TER_VERROR 0xf23b +#define F367TER_REGERR_VIT 0xf23b00ff + +/* PRVIT */ +#define R367TER_PRVIT 0xf23c +#define F367TER_PRVIT_7 0xf23c0080 +#define F367TER_DIS_VTHLOCK 0xf23c0040 +#define F367TER_E7_8VIT 0xf23c0020 +#define F367TER_E6_7VIT 0xf23c0010 +#define F367TER_E5_6VIT 0xf23c0008 +#define F367TER_E3_4VIT 0xf23c0004 +#define F367TER_E2_3VIT 0xf23c0002 +#define F367TER_E1_2VIT 0xf23c0001 + +/* VAVSRVIT */ +#define R367TER_VAVSRVIT 0xf23d +#define F367TER_AMVIT 0xf23d0080 +#define F367TER_FROZENVIT 0xf23d0040 +#define F367TER_SNVIT 0xf23d0030 +#define F367TER_TOVVIT 0xf23d000c +#define F367TER_HYPVIT 0xf23d0003 + +/* VSTATUSVIT */ +#define R367TER_VSTATUSVIT 0xf23e +#define F367TER_VITERBI_ON 0xf23e0080 +#define F367TER_END_LOOPVIT 0xf23e0040 +#define F367TER_VITERBI_DEPRF 0xf23e0020 +#define F367TER_PRFVIT 0xf23e0010 +#define F367TER_LOCKEDVIT 0xf23e0008 +#define F367TER_VITERBI_DELOCK 0xf23e0004 +#define F367TER_VIT_DEMODSEL 0xf23e0002 +#define F367TER_VITERBI_COMPOUT 0xf23e0001 + +/* VTHINUSE */ +#define R367TER_VTHINUSE 0xf23f +#define F367TER_VIT_INUSE 0xf23f00ff + +/* KDIV12 */ +#define R367TER_KDIV12 0xf240 +#define F367TER_KDIV12_MANUAL 0xf2400080 +#define F367TER_K_DIVIDER_12 0xf240007f + +/* KDIV23 */ +#define R367TER_KDIV23 0xf241 +#define F367TER_KDIV23_MANUAL 0xf2410080 +#define F367TER_K_DIVIDER_23 0xf241007f + +/* KDIV34 */ +#define R367TER_KDIV34 0xf242 +#define F367TER_KDIV34_MANUAL 0xf2420080 +#define F367TER_K_DIVIDER_34 0xf242007f + +/* KDIV56 */ +#define R367TER_KDIV56 0xf243 +#define F367TER_KDIV56_MANUAL 0xf2430080 +#define F367TER_K_DIVIDER_56 0xf243007f + +/* KDIV67 */ +#define R367TER_KDIV67 0xf244 +#define F367TER_KDIV67_MANUAL 0xf2440080 +#define F367TER_K_DIVIDER_67 0xf244007f + +/* KDIV78 */ +#define R367TER_KDIV78 0xf245 +#define F367TER_KDIV78_MANUAL 0xf2450080 +#define F367TER_K_DIVIDER_78 0xf245007f + +/* SIGPOWER */ +#define R367TER_SIGPOWER 0xf246 +#define F367TER_SIGPOWER_MANUAL 0xf2460080 +#define F367TER_SIG_POWER 0xf246007f + +/* DEMAPVIT */ +#define R367TER_DEMAPVIT 0xf247 +#define F367TER_DEMAPVIT_7 0xf2470080 +#define F367TER_K_DIVIDER_VIT 0xf247007f + +/* VITSCALE */ +#define R367TER_VITSCALE 0xf248 +#define F367TER_NVTH_NOSRANGE 0xf2480080 +#define F367TER_VERROR_MAXMODE 0xf2480040 +#define F367TER_KDIV_MODE 0xf2480030 +#define F367TER_NSLOWSN_LOCKED 0xf2480008 +#define F367TER_DELOCK_PRFLOSS 0xf2480004 +#define F367TER_DIS_RSFLOCK 0xf2480002 +#define F367TER_VITSCALE_0 0xf2480001 + +/* FFEC1PRG */ +#define R367TER_FFEC1PRG 0xf249 +#define F367TER_FDSS_DVB 0xf2490080 +#define F367TER_FDSS_SRCH 0xf2490040 +#define F367TER_FFECPROG_5 0xf2490020 +#define F367TER_FFECPROG_4 0xf2490010 +#define F367TER_FFECPROG_3 0xf2490008 +#define F367TER_FFECPROG_2 0xf2490004 +#define F367TER_FTS1_DISABLE 0xf2490002 +#define F367TER_FTS2_DISABLE 0xf2490001 + +/* FVITCURPUN */ +#define R367TER_FVITCURPUN 0xf24a +#define F367TER_FVIT_MAPPING 0xf24a00e0 +#define F367TER_FVIT_CURPUN 0xf24a001f + +/* FVERROR */ +#define R367TER_FVERROR 0xf24b +#define F367TER_FREGERR_VIT 0xf24b00ff + +/* FVSTATUSVIT */ +#define R367TER_FVSTATUSVIT 0xf24c +#define F367TER_FVITERBI_ON 0xf24c0080 +#define F367TER_F1END_LOOPVIT 0xf24c0040 +#define F367TER_FVITERBI_DEPRF 0xf24c0020 +#define F367TER_FPRFVIT 0xf24c0010 +#define F367TER_FLOCKEDVIT 0xf24c0008 +#define F367TER_FVITERBI_DELOCK 0xf24c0004 +#define F367TER_FVIT_DEMODSEL 0xf24c0002 +#define F367TER_FVITERBI_COMPOUT 0xf24c0001 + +/* DEBUG_LT1 */ +#define R367TER_DEBUG_LT1 0xf24d +#define F367TER_DBG_LT1 0xf24d00ff + +/* DEBUG_LT2 */ +#define R367TER_DEBUG_LT2 0xf24e +#define F367TER_DBG_LT2 0xf24e00ff + +/* DEBUG_LT3 */ +#define R367TER_DEBUG_LT3 0xf24f +#define F367TER_DBG_LT3 0xf24f00ff + +/* TSTSFMET */ +#define R367TER_TSTSFMET 0xf250 +#define F367TER_TSTSFEC_METRIQUES 0xf25000ff + +/* SELOUT */ +#define R367TER_SELOUT 0xf252 +#define F367TER_EN_SYNC 0xf2520080 +#define F367TER_EN_TBUSDEMAP 0xf2520040 +#define F367TER_SELOUT_5 0xf2520020 +#define F367TER_SELOUT_4 0xf2520010 +#define F367TER_TSTSYNCHRO_MODE 0xf2520002 + +/* TSYNC */ +#define R367TER_TSYNC 0xf253 +#define F367TER_CURPUN_INCMODE 0xf2530080 +#define F367TER_CERR_TSTMODE 0xf2530040 +#define F367TER_SHIFTSOF_MODE 0xf2530030 +#define F367TER_SLOWPHA_MODE 0xf2530008 +#define F367TER_PXX_BYPALL 0xf2530004 +#define F367TER_FROTA45_FIRST 0xf2530002 +#define F367TER_TST_BCHERROR 0xf2530001 + +/* TSTERR */ +#define R367TER_TSTERR 0xf254 +#define F367TER_TST_LONGPKT 0xf2540080 +#define F367TER_TST_ISSYION 0xf2540040 +#define F367TER_TST_NPDON 0xf2540020 +#define F367TER_TSTERR_4 0xf2540010 +#define F367TER_TRACEBACK_MODE 0xf2540008 +#define F367TER_TST_RSPARITY 0xf2540004 +#define F367TER_METRIQUE_MODE 0xf2540003 + +/* TSFSYNC */ +#define R367TER_TSFSYNC 0xf255 +#define F367TER_EN_SFECSYNC 0xf2550080 +#define F367TER_EN_SFECDEMAP 0xf2550040 +#define F367TER_SFCERR_TSTMODE 0xf2550020 +#define F367TER_SFECPXX_BYPALL 0xf2550010 +#define F367TER_SFECTSTSYNCHRO_MODE 0xf255000f + +/* TSTSFERR */ +#define R367TER_TSTSFERR 0xf256 +#define F367TER_TSTSTERR_7 0xf2560080 +#define F367TER_TSTSTERR_6 0xf2560040 +#define F367TER_TSTSTERR_5 0xf2560020 +#define F367TER_TSTSTERR_4 0xf2560010 +#define F367TER_SFECTRACEBACK_MODE 0xf2560008 +#define F367TER_SFEC_NCONVPROG 0xf2560004 +#define F367TER_SFECMETRIQUE_MODE 0xf2560003 + +/* TSTTSSF1 */ +#define R367TER_TSTTSSF1 0xf258 +#define F367TER_TSTERSSF 0xf2580080 +#define F367TER_TSTTSSFEN 0xf2580040 +#define F367TER_SFEC_OUTMODE 0xf2580030 +#define F367TER_XLSF_NOFTHRESHOLD 0xf2580008 +#define F367TER_TSTTSSF_STACKSEL 0xf2580007 + +/* TSTTSSF2 */ +#define R367TER_TSTTSSF2 0xf259 +#define F367TER_DILSF_DBBHEADER 0xf2590080 +#define F367TER_TSTTSSF_DISBUG 0xf2590040 +#define F367TER_TSTTSSF_NOBADSTART 0xf2590020 +#define F367TER_TSTTSSF_SELECT 0xf259001f + +/* TSTTSSF3 */ +#define R367TER_TSTTSSF3 0xf25a +#define F367TER_TSTTSSF3_7 0xf25a0080 +#define F367TER_TSTTSSF3_6 0xf25a0040 +#define F367TER_TSTTSSF3_5 0xf25a0020 +#define F367TER_TSTTSSF3_4 0xf25a0010 +#define F367TER_TSTTSSF3_3 0xf25a0008 +#define F367TER_TSTTSSF3_2 0xf25a0004 +#define F367TER_TSTTSSF3_1 0xf25a0002 +#define F367TER_DISSF_CLKENABLE 0xf25a0001 + +/* TSTTS1 */ +#define R367TER_TSTTS1 0xf25c +#define F367TER_TSTERS 0xf25c0080 +#define F367TER_TSFIFO_DSSSYNCB 0xf25c0040 +#define F367TER_TSTTS_FSPYBEFRS 0xf25c0020 +#define F367TER_NFORCE_SYNCBYTE 0xf25c0010 +#define F367TER_XL_NOFTHRESHOLD 0xf25c0008 +#define F367TER_TSTTS_FRFORCEPKT 0xf25c0004 +#define F367TER_DESCR_NOTAUTO 0xf25c0002 +#define F367TER_TSTTSEN 0xf25c0001 + +/* TSTTS2 */ +#define R367TER_TSTTS2 0xf25d +#define F367TER_DIL_DBBHEADER 0xf25d0080 +#define F367TER_TSTTS_NOBADXXX 0xf25d0040 +#define F367TER_TSFIFO_DELSPEEDUP 0xf25d0020 +#define F367TER_TSTTS_SELECT 0xf25d001f + +/* TSTTS3 */ +#define R367TER_TSTTS3 0xf25e +#define F367TER_TSTTS_NOPKTGAIN 0xf25e0080 +#define F367TER_TSTTS_NOPKTENE 0xf25e0040 +#define F367TER_TSTTS_ISOLATION 0xf25e0020 +#define F367TER_TSTTS_DISBUG 0xf25e0010 +#define F367TER_TSTTS_NOBADSTART 0xf25e0008 +#define F367TER_TSTTS_STACKSEL 0xf25e0007 + +/* TSTTS4 */ +#define R367TER_TSTTS4 0xf25f +#define F367TER_TSTTS4_7 0xf25f0080 +#define F367TER_TSTTS4_6 0xf25f0040 +#define F367TER_TSTTS4_5 0xf25f0020 +#define F367TER_TSTTS_DISDSTATE 0xf25f0010 +#define F367TER_TSTTS_FASTNOSYNC 0xf25f0008 +#define F367TER_EXT_FECSPYIN 0xf25f0004 +#define F367TER_TSTTS_NODPZERO 0xf25f0002 +#define F367TER_TSTTS_NODIV3 0xf25f0001 + +/* TSTTSRC */ +#define R367TER_TSTTSRC 0xf26c +#define F367TER_TSTTSRC_7 0xf26c0080 +#define F367TER_TSRCFIFO_DSSSYNCB 0xf26c0040 +#define F367TER_TSRCFIFO_DPUNACTIVE 0xf26c0020 +#define F367TER_TSRCFIFO_DELSPEEDUP 0xf26c0010 +#define F367TER_TSTTSRC_NODIV3 0xf26c0008 +#define F367TER_TSTTSRC_FRFORCEPKT 0xf26c0004 +#define F367TER_SAT25_SDDORIGINE 0xf26c0002 +#define F367TER_TSTTSRC_INACTIVE 0xf26c0001 + +/* TSTTSRS */ +#define R367TER_TSTTSRS 0xf26d +#define F367TER_TSTTSRS_7 0xf26d0080 +#define F367TER_TSTTSRS_6 0xf26d0040 +#define F367TER_TSTTSRS_5 0xf26d0020 +#define F367TER_TSTTSRS_4 0xf26d0010 +#define F367TER_TSTTSRS_3 0xf26d0008 +#define F367TER_TSTTSRS_2 0xf26d0004 +#define F367TER_TSTRS_DISRS2 0xf26d0002 +#define F367TER_TSTRS_DISRS1 0xf26d0001 + +/* TSSTATEM */ +#define R367TER_TSSTATEM 0xf270 +#define F367TER_TSDIL_ON 0xf2700080 +#define F367TER_TSSKIPRS_ON 0xf2700040 +#define F367TER_TSRS_ON 0xf2700020 +#define F367TER_TSDESCRAMB_ON 0xf2700010 +#define F367TER_TSFRAME_MODE 0xf2700008 +#define F367TER_TS_DISABLE 0xf2700004 +#define F367TER_TSACM_MODE 0xf2700002 +#define F367TER_TSOUT_NOSYNC 0xf2700001 + +/* TSSTATEL */ +#define R367TER_TSSTATEL 0xf271 +#define F367TER_TSNOSYNCBYTE 0xf2710080 +#define F367TER_TSPARITY_ON 0xf2710040 +#define F367TER_TSSYNCOUTRS_ON 0xf2710020 +#define F367TER_TSDVBS2_MODE 0xf2710010 +#define F367TER_TSISSYI_ON 0xf2710008 +#define F367TER_TSNPD_ON 0xf2710004 +#define F367TER_TSCRC8_ON 0xf2710002 +#define F367TER_TSDSS_PACKET 0xf2710001 + +/* TSCFGH */ +#define R367TER_TSCFGH 0xf272 +#define F367TER_TSFIFO_DVBCI 0xf2720080 +#define F367TER_TSFIFO_SERIAL 0xf2720040 +#define F367TER_TSFIFO_TEIUPDATE 0xf2720020 +#define F367TER_TSFIFO_DUTY50 0xf2720010 +#define F367TER_TSFIFO_HSGNLOUT 0xf2720008 +#define F367TER_TSFIFO_ERRMODE 0xf2720006 +#define F367TER_RST_HWARE 0xf2720001 + +/* TSCFGM */ +#define R367TER_TSCFGM 0xf273 +#define F367TER_TSFIFO_MANSPEED 0xf27300c0 +#define F367TER_TSFIFO_PERMDATA 0xf2730020 +#define F367TER_TSFIFO_NONEWSGNL 0xf2730010 +#define F367TER_TSFIFO_BITSPEED 0xf2730008 +#define F367TER_NPD_SPECDVBS2 0xf2730004 +#define F367TER_TSFIFO_STOPCKDIS 0xf2730002 +#define F367TER_TSFIFO_INVDATA 0xf2730001 + +/* TSCFGL */ +#define R367TER_TSCFGL 0xf274 +#define F367TER_TSFIFO_BCLKDEL1cK 0xf27400c0 +#define F367TER_BCHERROR_MODE 0xf2740030 +#define F367TER_TSFIFO_NSGNL2dATA 0xf2740008 +#define F367TER_TSFIFO_EMBINDVB 0xf2740004 +#define F367TER_TSFIFO_DPUNACT 0xf2740002 +#define F367TER_TSFIFO_NPDOFF 0xf2740001 + +/* TSSYNC */ +#define R367TER_TSSYNC 0xf275 +#define F367TER_TSFIFO_PERMUTE 0xf2750080 +#define F367TER_TSFIFO_FISCR3B 0xf2750060 +#define F367TER_TSFIFO_SYNCMODE 0xf2750018 +#define F367TER_TSFIFO_SYNCSEL 0xf2750007 + +/* TSINSDELH */ +#define R367TER_TSINSDELH 0xf276 +#define F367TER_TSDEL_SYNCBYTE 0xf2760080 +#define F367TER_TSDEL_XXHEADER 0xf2760040 +#define F367TER_TSDEL_BBHEADER 0xf2760020 +#define F367TER_TSDEL_DATAFIELD 0xf2760010 +#define F367TER_TSINSDEL_ISCR 0xf2760008 +#define F367TER_TSINSDEL_NPD 0xf2760004 +#define F367TER_TSINSDEL_RSPARITY 0xf2760002 +#define F367TER_TSINSDEL_CRC8 0xf2760001 + +/* TSINSDELM */ +#define R367TER_TSINSDELM 0xf277 +#define F367TER_TSINS_BBPADDING 0xf2770080 +#define F367TER_TSINS_BCHFEC 0xf2770040 +#define F367TER_TSINS_LDPCFEC 0xf2770020 +#define F367TER_TSINS_EMODCOD 0xf2770010 +#define F367TER_TSINS_TOKEN 0xf2770008 +#define F367TER_TSINS_XXXERR 0xf2770004 +#define F367TER_TSINS_MATYPE 0xf2770002 +#define F367TER_TSINS_UPL 0xf2770001 + +/* TSINSDELL */ +#define R367TER_TSINSDELL 0xf278 +#define F367TER_TSINS_DFL 0xf2780080 +#define F367TER_TSINS_SYNCD 0xf2780040 +#define F367TER_TSINS_BLOCLEN 0xf2780020 +#define F367TER_TSINS_SIGPCOUNT 0xf2780010 +#define F367TER_TSINS_FIFO 0xf2780008 +#define F367TER_TSINS_REALPACK 0xf2780004 +#define F367TER_TSINS_TSCONFIG 0xf2780002 +#define F367TER_TSINS_LATENCY 0xf2780001 + +/* TSDIVN */ +#define R367TER_TSDIVN 0xf279 +#define F367TER_TSFIFO_LOWSPEED 0xf2790080 +#define F367TER_BYTE_OVERSAMPLING 0xf2790070 +#define F367TER_TSMANUAL_PACKETNBR 0xf279000f + +/* TSDIVPM */ +#define R367TER_TSDIVPM 0xf27a +#define F367TER_TSMANUAL_P_HI 0xf27a00ff + +/* TSDIVPL */ +#define R367TER_TSDIVPL 0xf27b +#define F367TER_TSMANUAL_P_LO 0xf27b00ff + +/* TSDIVQM */ +#define R367TER_TSDIVQM 0xf27c +#define F367TER_TSMANUAL_Q_HI 0xf27c00ff + +/* TSDIVQL */ +#define R367TER_TSDIVQL 0xf27d +#define F367TER_TSMANUAL_Q_LO 0xf27d00ff + +/* TSDILSTKM */ +#define R367TER_TSDILSTKM 0xf27e +#define F367TER_TSFIFO_DILSTK_HI 0xf27e00ff + +/* TSDILSTKL */ +#define R367TER_TSDILSTKL 0xf27f +#define F367TER_TSFIFO_DILSTK_LO 0xf27f00ff + +/* TSSPEED */ +#define R367TER_TSSPEED 0xf280 +#define F367TER_TSFIFO_OUTSPEED 0xf28000ff + +/* TSSTATUS */ +#define R367TER_TSSTATUS 0xf281 +#define F367TER_TSFIFO_LINEOK 0xf2810080 +#define F367TER_TSFIFO_ERROR 0xf2810040 +#define F367TER_TSFIFO_DATA7 0xf2810020 +#define F367TER_TSFIFO_NOSYNC 0xf2810010 +#define F367TER_ISCR_INITIALIZED 0xf2810008 +#define F367TER_ISCR_UPDATED 0xf2810004 +#define F367TER_SOFFIFO_UNREGUL 0xf2810002 +#define F367TER_DIL_READY 0xf2810001 + +/* TSSTATUS2 */ +#define R367TER_TSSTATUS2 0xf282 +#define F367TER_TSFIFO_DEMODSEL 0xf2820080 +#define F367TER_TSFIFOSPEED_STORE 0xf2820040 +#define F367TER_DILXX_RESET 0xf2820020 +#define F367TER_TSSERIAL_IMPOSSIBLE 0xf2820010 +#define F367TER_TSFIFO_UNDERSPEED 0xf2820008 +#define F367TER_BITSPEED_EVENT 0xf2820004 +#define F367TER_UL_SCRAMBDETECT 0xf2820002 +#define F367TER_ULDTV67_FALSELOCK 0xf2820001 + +/* TSBITRATEM */ +#define R367TER_TSBITRATEM 0xf283 +#define F367TER_TSFIFO_BITRATE_HI 0xf28300ff + +/* TSBITRATEL */ +#define R367TER_TSBITRATEL 0xf284 +#define F367TER_TSFIFO_BITRATE_LO 0xf28400ff + +/* TSPACKLENM */ +#define R367TER_TSPACKLENM 0xf285 +#define F367TER_TSFIFO_PACKCPT 0xf28500e0 +#define F367TER_DIL_RPLEN_HI 0xf285001f + +/* TSPACKLENL */ +#define R367TER_TSPACKLENL 0xf286 +#define F367TER_DIL_RPLEN_LO 0xf28600ff + +/* TSBLOCLENM */ +#define R367TER_TSBLOCLENM 0xf287 +#define F367TER_TSFIFO_PFLEN_HI 0xf28700ff + +/* TSBLOCLENL */ +#define R367TER_TSBLOCLENL 0xf288 +#define F367TER_TSFIFO_PFLEN_LO 0xf28800ff + +/* TSDLYH */ +#define R367TER_TSDLYH 0xf289 +#define F367TER_SOFFIFO_TSTIMEVALID 0xf2890080 +#define F367TER_SOFFIFO_SPEEDUP 0xf2890040 +#define F367TER_SOFFIFO_STOP 0xf2890020 +#define F367TER_SOFFIFO_REGULATED 0xf2890010 +#define F367TER_SOFFIFO_REALSBOFF_HI 0xf289000f + +/* TSDLYM */ +#define R367TER_TSDLYM 0xf28a +#define F367TER_SOFFIFO_REALSBOFF_MED 0xf28a00ff + +/* TSDLYL */ +#define R367TER_TSDLYL 0xf28b +#define F367TER_SOFFIFO_REALSBOFF_LO 0xf28b00ff + +/* TSNPDAV */ +#define R367TER_TSNPDAV 0xf28c +#define F367TER_TSNPD_AVERAGE 0xf28c00ff + +/* TSBUFSTATH */ +#define R367TER_TSBUFSTATH 0xf28d +#define F367TER_TSISCR_3BYTES 0xf28d0080 +#define F367TER_TSISCR_NEWDATA 0xf28d0040 +#define F367TER_TSISCR_BUFSTAT_HI 0xf28d003f + +/* TSBUFSTATM */ +#define R367TER_TSBUFSTATM 0xf28e +#define F367TER_TSISCR_BUFSTAT_MED 0xf28e00ff + +/* TSBUFSTATL */ +#define R367TER_TSBUFSTATL 0xf28f +#define F367TER_TSISCR_BUFSTAT_LO 0xf28f00ff + +/* TSDEBUGM */ +#define R367TER_TSDEBUGM 0xf290 +#define F367TER_TSFIFO_ILLPACKET 0xf2900080 +#define F367TER_DIL_NOSYNC 0xf2900040 +#define F367TER_DIL_ISCR 0xf2900020 +#define F367TER_DILOUT_BSYNCB 0xf2900010 +#define F367TER_TSFIFO_EMPTYPKT 0xf2900008 +#define F367TER_TSFIFO_EMPTYRD 0xf2900004 +#define F367TER_SOFFIFO_STOPM 0xf2900002 +#define F367TER_SOFFIFO_SPEEDUPM 0xf2900001 + +/* TSDEBUGL */ +#define R367TER_TSDEBUGL 0xf291 +#define F367TER_TSFIFO_PACKLENFAIL 0xf2910080 +#define F367TER_TSFIFO_SYNCBFAIL 0xf2910040 +#define F367TER_TSFIFO_VITLIBRE 0xf2910020 +#define F367TER_TSFIFO_BOOSTSPEEDM 0xf2910010 +#define F367TER_TSFIFO_UNDERSPEEDM 0xf2910008 +#define F367TER_TSFIFO_ERROR_EVNT 0xf2910004 +#define F367TER_TSFIFO_FULL 0xf2910002 +#define F367TER_TSFIFO_OVERFLOWM 0xf2910001 + +/* TSDLYSETH */ +#define R367TER_TSDLYSETH 0xf292 +#define F367TER_SOFFIFO_OFFSET 0xf29200e0 +#define F367TER_SOFFIFO_SYMBOFFSET_HI 0xf292001f + +/* TSDLYSETM */ +#define R367TER_TSDLYSETM 0xf293 +#define F367TER_SOFFIFO_SYMBOFFSET_MED 0xf29300ff + +/* TSDLYSETL */ +#define R367TER_TSDLYSETL 0xf294 +#define F367TER_SOFFIFO_SYMBOFFSET_LO 0xf29400ff + +/* TSOBSCFG */ +#define R367TER_TSOBSCFG 0xf295 +#define F367TER_TSFIFO_OBSCFG 0xf29500ff + +/* TSOBSM */ +#define R367TER_TSOBSM 0xf296 +#define F367TER_TSFIFO_OBSDATA_HI 0xf29600ff + +/* TSOBSL */ +#define R367TER_TSOBSL 0xf297 +#define F367TER_TSFIFO_OBSDATA_LO 0xf29700ff + +/* ERRCTRL1 */ +#define R367TER_ERRCTRL1 0xf298 +#define F367TER_ERR_SRC1 0xf29800f0 +#define F367TER_ERRCTRL1_3 0xf2980008 +#define F367TER_NUM_EVT1 0xf2980007 + +/* ERRCNT1H */ +#define R367TER_ERRCNT1H 0xf299 +#define F367TER_ERRCNT1_OLDVALUE 0xf2990080 +#define F367TER_ERR_CNT1 0xf299007f + +/* ERRCNT1M */ +#define R367TER_ERRCNT1M 0xf29a +#define F367TER_ERR_CNT1_HI 0xf29a00ff + +/* ERRCNT1L */ +#define R367TER_ERRCNT1L 0xf29b +#define F367TER_ERR_CNT1_LO 0xf29b00ff + +/* ERRCTRL2 */ +#define R367TER_ERRCTRL2 0xf29c +#define F367TER_ERR_SRC2 0xf29c00f0 +#define F367TER_ERRCTRL2_3 0xf29c0008 +#define F367TER_NUM_EVT2 0xf29c0007 + +/* ERRCNT2H */ +#define R367TER_ERRCNT2H 0xf29d +#define F367TER_ERRCNT2_OLDVALUE 0xf29d0080 +#define F367TER_ERR_CNT2_HI 0xf29d007f + +/* ERRCNT2M */ +#define R367TER_ERRCNT2M 0xf29e +#define F367TER_ERR_CNT2_MED 0xf29e00ff + +/* ERRCNT2L */ +#define R367TER_ERRCNT2L 0xf29f +#define F367TER_ERR_CNT2_LO 0xf29f00ff + +/* FECSPY */ +#define R367TER_FECSPY 0xf2a0 +#define F367TER_SPY_ENABLE 0xf2a00080 +#define F367TER_NO_SYNCBYTE 0xf2a00040 +#define F367TER_SERIAL_MODE 0xf2a00020 +#define F367TER_UNUSUAL_PACKET 0xf2a00010 +#define F367TER_BERMETER_DATAMODE 0xf2a0000c +#define F367TER_BERMETER_LMODE 0xf2a00002 +#define F367TER_BERMETER_RESET 0xf2a00001 + +/* FSPYCFG */ +#define R367TER_FSPYCFG 0xf2a1 +#define F367TER_FECSPY_INPUT 0xf2a100c0 +#define F367TER_RST_ON_ERROR 0xf2a10020 +#define F367TER_ONE_SHOT 0xf2a10010 +#define F367TER_I2C_MOD 0xf2a1000c +#define F367TER_SPY_HYSTERESIS 0xf2a10003 + +/* FSPYDATA */ +#define R367TER_FSPYDATA 0xf2a2 +#define F367TER_SPY_STUFFING 0xf2a20080 +#define F367TER_NOERROR_PKTJITTER 0xf2a20040 +#define F367TER_SPY_CNULLPKT 0xf2a20020 +#define F367TER_SPY_OUTDATA_MODE 0xf2a2001f + +/* FSPYOUT */ +#define R367TER_FSPYOUT 0xf2a3 +#define F367TER_FSPY_DIRECT 0xf2a30080 +#define F367TER_FSPYOUT_6 0xf2a30040 +#define F367TER_SPY_OUTDATA_BUS 0xf2a30038 +#define F367TER_STUFF_MODE 0xf2a30007 + +/* FSTATUS */ +#define R367TER_FSTATUS 0xf2a4 +#define F367TER_SPY_ENDSIM 0xf2a40080 +#define F367TER_VALID_SIM 0xf2a40040 +#define F367TER_FOUND_SIGNAL 0xf2a40020 +#define F367TER_DSS_SYNCBYTE 0xf2a40010 +#define F367TER_RESULT_STATE 0xf2a4000f + +/* FGOODPACK */ +#define R367TER_FGOODPACK 0xf2a5 +#define F367TER_FGOOD_PACKET 0xf2a500ff + +/* FPACKCNT */ +#define R367TER_FPACKCNT 0xf2a6 +#define F367TER_FPACKET_COUNTER 0xf2a600ff + +/* FSPYMISC */ +#define R367TER_FSPYMISC 0xf2a7 +#define F367TER_FLABEL_COUNTER 0xf2a700ff + +/* FBERCPT4 */ +#define R367TER_FBERCPT4 0xf2a8 +#define F367TER_FBERMETER_CPT5 0xf2a800ff + +/* FBERCPT3 */ +#define R367TER_FBERCPT3 0xf2a9 +#define F367TER_FBERMETER_CPT4 0xf2a900ff + +/* FBERCPT2 */ +#define R367TER_FBERCPT2 0xf2aa +#define F367TER_FBERMETER_CPT3 0xf2aa00ff + +/* FBERCPT1 */ +#define R367TER_FBERCPT1 0xf2ab +#define F367TER_FBERMETER_CPT2 0xf2ab00ff + +/* FBERCPT0 */ +#define R367TER_FBERCPT0 0xf2ac +#define F367TER_FBERMETER_CPT1 0xf2ac00ff + +/* FBERERR2 */ +#define R367TER_FBERERR2 0xf2ad +#define F367TER_FBERMETER_ERR_HI 0xf2ad00ff + +/* FBERERR1 */ +#define R367TER_FBERERR1 0xf2ae +#define F367TER_FBERMETER_ERR_MED 0xf2ae00ff + +/* FBERERR0 */ +#define R367TER_FBERERR0 0xf2af +#define F367TER_FBERMETER_ERR_LO 0xf2af00ff + +/* FSTATESM */ +#define R367TER_FSTATESM 0xf2b0 +#define F367TER_RSTATE_F 0xf2b00080 +#define F367TER_RSTATE_E 0xf2b00040 +#define F367TER_RSTATE_D 0xf2b00020 +#define F367TER_RSTATE_C 0xf2b00010 +#define F367TER_RSTATE_B 0xf2b00008 +#define F367TER_RSTATE_A 0xf2b00004 +#define F367TER_RSTATE_9 0xf2b00002 +#define F367TER_RSTATE_8 0xf2b00001 + +/* FSTATESL */ +#define R367TER_FSTATESL 0xf2b1 +#define F367TER_RSTATE_7 0xf2b10080 +#define F367TER_RSTATE_6 0xf2b10040 +#define F367TER_RSTATE_5 0xf2b10020 +#define F367TER_RSTATE_4 0xf2b10010 +#define F367TER_RSTATE_3 0xf2b10008 +#define F367TER_RSTATE_2 0xf2b10004 +#define F367TER_RSTATE_1 0xf2b10002 +#define F367TER_RSTATE_0 0xf2b10001 + +/* FSPYBER */ +#define R367TER_FSPYBER 0xf2b2 +#define F367TER_FSPYBER_7 0xf2b20080 +#define F367TER_FSPYOBS_XORREAD 0xf2b20040 +#define F367TER_FSPYBER_OBSMODE 0xf2b20020 +#define F367TER_FSPYBER_SYNCBYTE 0xf2b20010 +#define F367TER_FSPYBER_UNSYNC 0xf2b20008 +#define F367TER_FSPYBER_CTIME 0xf2b20007 + +/* FSPYDISTM */ +#define R367TER_FSPYDISTM 0xf2b3 +#define F367TER_PKTTIME_DISTANCE_HI 0xf2b300ff + +/* FSPYDISTL */ +#define R367TER_FSPYDISTL 0xf2b4 +#define F367TER_PKTTIME_DISTANCE_LO 0xf2b400ff + +/* FSPYOBS7 */ +#define R367TER_FSPYOBS7 0xf2b8 +#define F367TER_FSPYOBS_SPYFAIL 0xf2b80080 +#define F367TER_FSPYOBS_SPYFAIL1 0xf2b80040 +#define F367TER_FSPYOBS_ERROR 0xf2b80020 +#define F367TER_FSPYOBS_STROUT 0xf2b80010 +#define F367TER_FSPYOBS_RESULTSTATE1 0xf2b8000f + +/* FSPYOBS6 */ +#define R367TER_FSPYOBS6 0xf2b9 +#define F367TER_FSPYOBS_RESULTSTATe0 0xf2b900f0 +#define F367TER_FSPYOBS_RESULTSTATEM1 0xf2b9000f + +/* FSPYOBS5 */ +#define R367TER_FSPYOBS5 0xf2ba +#define F367TER_FSPYOBS_BYTEOFPACKET1 0xf2ba00ff + +/* FSPYOBS4 */ +#define R367TER_FSPYOBS4 0xf2bb +#define F367TER_FSPYOBS_BYTEVALUE1 0xf2bb00ff + +/* FSPYOBS3 */ +#define R367TER_FSPYOBS3 0xf2bc +#define F367TER_FSPYOBS_DATA1 0xf2bc00ff + +/* FSPYOBS2 */ +#define R367TER_FSPYOBS2 0xf2bd +#define F367TER_FSPYOBS_DATa0 0xf2bd00ff + +/* FSPYOBS1 */ +#define R367TER_FSPYOBS1 0xf2be +#define F367TER_FSPYOBS_DATAM1 0xf2be00ff + +/* FSPYOBS0 */ +#define R367TER_FSPYOBS0 0xf2bf +#define F367TER_FSPYOBS_DATAM2 0xf2bf00ff + +/* SFDEMAP */ +#define R367TER_SFDEMAP 0xf2c0 +#define F367TER_SFDEMAP_7 0xf2c00080 +#define F367TER_SFEC_K_DIVIDER_VIT 0xf2c0007f + +/* SFERROR */ +#define R367TER_SFERROR 0xf2c1 +#define F367TER_SFEC_REGERR_VIT 0xf2c100ff + +/* SFAVSR */ +#define R367TER_SFAVSR 0xf2c2 +#define F367TER_SFEC_SUMERRORS 0xf2c20080 +#define F367TER_SERROR_MAXMODE 0xf2c20040 +#define F367TER_SN_SFEC 0xf2c20030 +#define F367TER_KDIV_MODE_SFEC 0xf2c2000c +#define F367TER_SFAVSR_1 0xf2c20002 +#define F367TER_SFAVSR_0 0xf2c20001 + +/* SFECSTATUS */ +#define R367TER_SFECSTATUS 0xf2c3 +#define F367TER_SFEC_ON 0xf2c30080 +#define F367TER_SFSTATUS_6 0xf2c30040 +#define F367TER_SFSTATUS_5 0xf2c30020 +#define F367TER_SFSTATUS_4 0xf2c30010 +#define F367TER_LOCKEDSFEC 0xf2c30008 +#define F367TER_SFEC_DELOCK 0xf2c30004 +#define F367TER_SFEC_DEMODSEL1 0xf2c30002 +#define F367TER_SFEC_OVFON 0xf2c30001 + +/* SFKDIV12 */ +#define R367TER_SFKDIV12 0xf2c4 +#define F367TER_SFECKDIV12_MAN 0xf2c40080 +#define F367TER_SFEC_K_DIVIDER_12 0xf2c4007f + +/* SFKDIV23 */ +#define R367TER_SFKDIV23 0xf2c5 +#define F367TER_SFECKDIV23_MAN 0xf2c50080 +#define F367TER_SFEC_K_DIVIDER_23 0xf2c5007f + +/* SFKDIV34 */ +#define R367TER_SFKDIV34 0xf2c6 +#define F367TER_SFECKDIV34_MAN 0xf2c60080 +#define F367TER_SFEC_K_DIVIDER_34 0xf2c6007f + +/* SFKDIV56 */ +#define R367TER_SFKDIV56 0xf2c7 +#define F367TER_SFECKDIV56_MAN 0xf2c70080 +#define F367TER_SFEC_K_DIVIDER_56 0xf2c7007f + +/* SFKDIV67 */ +#define R367TER_SFKDIV67 0xf2c8 +#define F367TER_SFECKDIV67_MAN 0xf2c80080 +#define F367TER_SFEC_K_DIVIDER_67 0xf2c8007f + +/* SFKDIV78 */ +#define R367TER_SFKDIV78 0xf2c9 +#define F367TER_SFECKDIV78_MAN 0xf2c90080 +#define F367TER_SFEC_K_DIVIDER_78 0xf2c9007f + +/* SFDILSTKM */ +#define R367TER_SFDILSTKM 0xf2ca +#define F367TER_SFEC_PACKCPT 0xf2ca00e0 +#define F367TER_SFEC_DILSTK_HI 0xf2ca001f + +/* SFDILSTKL */ +#define R367TER_SFDILSTKL 0xf2cb +#define F367TER_SFEC_DILSTK_LO 0xf2cb00ff + +/* SFSTATUS */ +#define R367TER_SFSTATUS 0xf2cc +#define F367TER_SFEC_LINEOK 0xf2cc0080 +#define F367TER_SFEC_ERROR 0xf2cc0040 +#define F367TER_SFEC_DATA7 0xf2cc0020 +#define F367TER_SFEC_OVERFLOW 0xf2cc0010 +#define F367TER_SFEC_DEMODSEL2 0xf2cc0008 +#define F367TER_SFEC_NOSYNC 0xf2cc0004 +#define F367TER_SFEC_UNREGULA 0xf2cc0002 +#define F367TER_SFEC_READY 0xf2cc0001 + +/* SFDLYH */ +#define R367TER_SFDLYH 0xf2cd +#define F367TER_SFEC_TSTIMEVALID 0xf2cd0080 +#define F367TER_SFEC_SPEEDUP 0xf2cd0040 +#define F367TER_SFEC_STOP 0xf2cd0020 +#define F367TER_SFEC_REGULATED 0xf2cd0010 +#define F367TER_SFEC_REALSYMBOFFSET 0xf2cd000f + +/* SFDLYM */ +#define R367TER_SFDLYM 0xf2ce +#define F367TER_SFEC_REALSYMBOFFSET_HI 0xf2ce00ff + +/* SFDLYL */ +#define R367TER_SFDLYL 0xf2cf +#define F367TER_SFEC_REALSYMBOFFSET_LO 0xf2cf00ff + +/* SFDLYSETH */ +#define R367TER_SFDLYSETH 0xf2d0 +#define F367TER_SFEC_OFFSET 0xf2d000e0 +#define F367TER_SFECDLYSETH_4 0xf2d00010 +#define F367TER_RST_SFEC 0xf2d00008 +#define F367TER_SFECDLYSETH_2 0xf2d00004 +#define F367TER_SFEC_DISABLE 0xf2d00002 +#define F367TER_SFEC_UNREGUL 0xf2d00001 + +/* SFDLYSETM */ +#define R367TER_SFDLYSETM 0xf2d1 +#define F367TER_SFECDLYSETM_7 0xf2d10080 +#define F367TER_SFEC_SYMBOFFSET_HI 0xf2d1007f + +/* SFDLYSETL */ +#define R367TER_SFDLYSETL 0xf2d2 +#define F367TER_SFEC_SYMBOFFSET_LO 0xf2d200ff + +/* SFOBSCFG */ +#define R367TER_SFOBSCFG 0xf2d3 +#define F367TER_SFEC_OBSCFG 0xf2d300ff + +/* SFOBSM */ +#define R367TER_SFOBSM 0xf2d4 +#define F367TER_SFEC_OBSDATA_HI 0xf2d400ff + +/* SFOBSL */ +#define R367TER_SFOBSL 0xf2d5 +#define F367TER_SFEC_OBSDATA_LO 0xf2d500ff + +/* SFECINFO */ +#define R367TER_SFECINFO 0xf2d6 +#define F367TER_SFECINFO_7 0xf2d60080 +#define F367TER_SFEC_SYNCDLSB 0xf2d60070 +#define F367TER_SFCE_S1cPHASE 0xf2d6000f + +/* SFERRCTRL */ +#define R367TER_SFERRCTRL 0xf2d8 +#define F367TER_SFEC_ERR_SOURCE 0xf2d800f0 +#define F367TER_SFERRCTRL_3 0xf2d80008 +#define F367TER_SFEC_NUM_EVENT 0xf2d80007 + +/* SFERRCNTH */ +#define R367TER_SFERRCNTH 0xf2d9 +#define F367TER_SFERRC_OLDVALUE 0xf2d90080 +#define F367TER_SFEC_ERR_CNT 0xf2d9007f + +/* SFERRCNTM */ +#define R367TER_SFERRCNTM 0xf2da +#define F367TER_SFEC_ERR_CNT_HI 0xf2da00ff + +/* SFERRCNTL */ +#define R367TER_SFERRCNTL 0xf2db +#define F367TER_SFEC_ERR_CNT_LO 0xf2db00ff + +/* SYMBRATEM */ +#define R367TER_SYMBRATEM 0xf2e0 +#define F367TER_DEFGEN_SYMBRATE_HI 0xf2e000ff + +/* SYMBRATEL */ +#define R367TER_SYMBRATEL 0xf2e1 +#define F367TER_DEFGEN_SYMBRATE_LO 0xf2e100ff + +/* SYMBSTATUS */ +#define R367TER_SYMBSTATUS 0xf2e2 +#define F367TER_SYMBDLINE2_OFF 0xf2e20080 +#define F367TER_SDDL_REINIT1 0xf2e20040 +#define F367TER_SDD_REINIT1 0xf2e20020 +#define F367TER_TOKENID_ERROR 0xf2e20010 +#define F367TER_SYMBRATE_OVERFLOW 0xf2e20008 +#define F367TER_SYMBRATE_UNDERFLOW 0xf2e20004 +#define F367TER_TOKENID_RSTEVENT 0xf2e20002 +#define F367TER_TOKENID_RESET1 0xf2e20001 + +/* SYMBCFG */ +#define R367TER_SYMBCFG 0xf2e3 +#define F367TER_SYMBCFG_7 0xf2e30080 +#define F367TER_SYMBCFG_6 0xf2e30040 +#define F367TER_SYMBCFG_5 0xf2e30020 +#define F367TER_SYMBCFG_4 0xf2e30010 +#define F367TER_SYMRATE_FSPEED 0xf2e3000c +#define F367TER_SYMRATE_SSPEED 0xf2e30003 + +/* SYMBFIFOM */ +#define R367TER_SYMBFIFOM 0xf2e4 +#define F367TER_SYMBFIFOM_7 0xf2e40080 +#define F367TER_SYMBFIFOM_6 0xf2e40040 +#define F367TER_DEFGEN_SYMFIFO_HI 0xf2e4003f + +/* SYMBFIFOL */ +#define R367TER_SYMBFIFOL 0xf2e5 +#define F367TER_DEFGEN_SYMFIFO_LO 0xf2e500ff + +/* SYMBOFFSM */ +#define R367TER_SYMBOFFSM 0xf2e6 +#define F367TER_TOKENID_RESET2 0xf2e60080 +#define F367TER_SDDL_REINIT2 0xf2e60040 +#define F367TER_SDD_REINIT2 0xf2e60020 +#define F367TER_SYMBOFFSM_4 0xf2e60010 +#define F367TER_SYMBOFFSM_3 0xf2e60008 +#define F367TER_DEFGEN_SYMBOFFSET_HI 0xf2e60007 + +/* SYMBOFFSL */ +#define R367TER_SYMBOFFSL 0xf2e7 +#define F367TER_DEFGEN_SYMBOFFSET_LO 0xf2e700ff + +/* DEBUG_LT4 */ +#define R367TER_DEBUG_LT4 0xf400 +#define F367TER_F_DEBUG_LT4 0xf40000ff + +/* DEBUG_LT5 */ +#define R367TER_DEBUG_LT5 0xf401 +#define F367TER_F_DEBUG_LT5 0xf40100ff + +/* DEBUG_LT6 */ +#define R367TER_DEBUG_LT6 0xf402 +#define F367TER_F_DEBUG_LT6 0xf40200ff + +/* DEBUG_LT7 */ +#define R367TER_DEBUG_LT7 0xf403 +#define F367TER_F_DEBUG_LT7 0xf40300ff + +/* DEBUG_LT8 */ +#define R367TER_DEBUG_LT8 0xf404 +#define F367TER_F_DEBUG_LT8 0xf40400ff + +/* DEBUG_LT9 */ +#define R367TER_DEBUG_LT9 0xf405 +#define F367TER_F_DEBUG_LT9 0xf40500ff + +#define STV0367TER_NBREGS 445 + +/* ID */ +#define R367CAB_ID 0xf000 +#define F367CAB_IDENTIFICATIONREGISTER 0xf00000ff + +/* I2CRPT */ +#define R367CAB_I2CRPT 0xf001 +#define F367CAB_I2CT_ON 0xf0010080 +#define F367CAB_ENARPT_LEVEL 0xf0010070 +#define F367CAB_SCLT_DELAY 0xf0010008 +#define F367CAB_SCLT_NOD 0xf0010004 +#define F367CAB_STOP_ENABLE 0xf0010002 +#define F367CAB_SDAT_NOD 0xf0010001 + +/* TOPCTRL */ +#define R367CAB_TOPCTRL 0xf002 +#define F367CAB_STDBY 0xf0020080 +#define F367CAB_STDBY_CORE 0xf0020020 +#define F367CAB_QAM_COFDM 0xf0020010 +#define F367CAB_TS_DIS 0xf0020008 +#define F367CAB_DIR_CLK_216 0xf0020004 + +/* IOCFG0 */ +#define R367CAB_IOCFG0 0xf003 +#define F367CAB_OP0_SD 0xf0030080 +#define F367CAB_OP0_VAL 0xf0030040 +#define F367CAB_OP0_OD 0xf0030020 +#define F367CAB_OP0_INV 0xf0030010 +#define F367CAB_OP0_DACVALUE_HI 0xf003000f + +/* DAc0R */ +#define R367CAB_DAC0R 0xf004 +#define F367CAB_OP0_DACVALUE_LO 0xf00400ff + +/* IOCFG1 */ +#define R367CAB_IOCFG1 0xf005 +#define F367CAB_IP0 0xf0050040 +#define F367CAB_OP1_OD 0xf0050020 +#define F367CAB_OP1_INV 0xf0050010 +#define F367CAB_OP1_DACVALUE_HI 0xf005000f + +/* DAC1R */ +#define R367CAB_DAC1R 0xf006 +#define F367CAB_OP1_DACVALUE_LO 0xf00600ff + +/* IOCFG2 */ +#define R367CAB_IOCFG2 0xf007 +#define F367CAB_OP2_LOCK_CONF 0xf00700e0 +#define F367CAB_OP2_OD 0xf0070010 +#define F367CAB_OP2_VAL 0xf0070008 +#define F367CAB_OP1_LOCK_CONF 0xf0070007 + +/* SDFR */ +#define R367CAB_SDFR 0xf008 +#define F367CAB_OP0_FREQ 0xf00800f0 +#define F367CAB_OP1_FREQ 0xf008000f + +/* AUX_CLK */ +#define R367CAB_AUX_CLK 0xf00a +#define F367CAB_AUXFEC_CTL 0xf00a00c0 +#define F367CAB_DIS_CKX4 0xf00a0020 +#define F367CAB_CKSEL 0xf00a0018 +#define F367CAB_CKDIV_PROG 0xf00a0006 +#define F367CAB_AUXCLK_ENA 0xf00a0001 + +/* FREESYS1 */ +#define R367CAB_FREESYS1 0xf00b +#define F367CAB_FREESYS_1 0xf00b00ff + +/* FREESYS2 */ +#define R367CAB_FREESYS2 0xf00c +#define F367CAB_FREESYS_2 0xf00c00ff + +/* FREESYS3 */ +#define R367CAB_FREESYS3 0xf00d +#define F367CAB_FREESYS_3 0xf00d00ff + +/* GPIO_CFG */ +#define R367CAB_GPIO_CFG 0xf00e +#define F367CAB_GPIO7_OD 0xf00e0080 +#define F367CAB_GPIO7_CFG 0xf00e0040 +#define F367CAB_GPIO6_OD 0xf00e0020 +#define F367CAB_GPIO6_CFG 0xf00e0010 +#define F367CAB_GPIO5_OD 0xf00e0008 +#define F367CAB_GPIO5_CFG 0xf00e0004 +#define F367CAB_GPIO4_OD 0xf00e0002 +#define F367CAB_GPIO4_CFG 0xf00e0001 + +/* GPIO_CMD */ +#define R367CAB_GPIO_CMD 0xf00f +#define F367CAB_GPIO7_VAL 0xf00f0008 +#define F367CAB_GPIO6_VAL 0xf00f0004 +#define F367CAB_GPIO5_VAL 0xf00f0002 +#define F367CAB_GPIO4_VAL 0xf00f0001 + +/* TSTRES */ +#define R367CAB_TSTRES 0xf0c0 +#define F367CAB_FRES_DISPLAY 0xf0c00080 +#define F367CAB_FRES_FIFO_AD 0xf0c00020 +#define F367CAB_FRESRS 0xf0c00010 +#define F367CAB_FRESACS 0xf0c00008 +#define F367CAB_FRESFEC 0xf0c00004 +#define F367CAB_FRES_PRIF 0xf0c00002 +#define F367CAB_FRESCORE 0xf0c00001 + +/* ANACTRL */ +#define R367CAB_ANACTRL 0xf0c1 +#define F367CAB_BYPASS_XTAL 0xf0c10040 +#define F367CAB_BYPASS_PLLXN 0xf0c1000c +#define F367CAB_DIS_PAD_OSC 0xf0c10002 +#define F367CAB_STDBY_PLLXN 0xf0c10001 + +/* TSTBUS */ +#define R367CAB_TSTBUS 0xf0c2 +#define F367CAB_TS_BYTE_CLK_INV 0xf0c20080 +#define F367CAB_CFG_IP 0xf0c20070 +#define F367CAB_CFG_TST 0xf0c2000f + +/* RF_AGC1 */ +#define R367CAB_RF_AGC1 0xf0d4 +#define F367CAB_RF_AGC1_LEVEL_HI 0xf0d400ff + +/* RF_AGC2 */ +#define R367CAB_RF_AGC2 0xf0d5 +#define F367CAB_REF_ADGP 0xf0d50080 +#define F367CAB_STDBY_ADCGP 0xf0d50020 +#define F367CAB_RF_AGC1_LEVEL_LO 0xf0d50003 + +/* ANADIGCTRL */ +#define R367CAB_ANADIGCTRL 0xf0d7 +#define F367CAB_SEL_CLKDEM 0xf0d70020 +#define F367CAB_EN_BUFFER_Q 0xf0d70010 +#define F367CAB_EN_BUFFER_I 0xf0d70008 +#define F367CAB_ADC_RIS_EGDE 0xf0d70004 +#define F367CAB_SGN_ADC 0xf0d70002 +#define F367CAB_SEL_AD12_SYNC 0xf0d70001 + +/* PLLMDIV */ +#define R367CAB_PLLMDIV 0xf0d8 +#define F367CAB_PLL_MDIV 0xf0d800ff + +/* PLLNDIV */ +#define R367CAB_PLLNDIV 0xf0d9 +#define F367CAB_PLL_NDIV 0xf0d900ff + +/* PLLSETUP */ +#define R367CAB_PLLSETUP 0xf0da +#define F367CAB_PLL_PDIV 0xf0da0070 +#define F367CAB_PLL_KDIV 0xf0da000f + +/* DUAL_AD12 */ +#define R367CAB_DUAL_AD12 0xf0db +#define F367CAB_FS20M 0xf0db0020 +#define F367CAB_FS50M 0xf0db0010 +#define F367CAB_INMODe0 0xf0db0008 +#define F367CAB_POFFQ 0xf0db0004 +#define F367CAB_POFFI 0xf0db0002 +#define F367CAB_INMODE1 0xf0db0001 + +/* TSTBIST */ +#define R367CAB_TSTBIST 0xf0dc +#define F367CAB_TST_BYP_CLK 0xf0dc0080 +#define F367CAB_TST_GCLKENA_STD 0xf0dc0040 +#define F367CAB_TST_GCLKENA 0xf0dc0020 +#define F367CAB_TST_MEMBIST 0xf0dc001f + +/* CTRL_1 */ +#define R367CAB_CTRL_1 0xf402 +#define F367CAB_SOFT_RST 0xf4020080 +#define F367CAB_EQU_RST 0xf4020008 +#define F367CAB_CRL_RST 0xf4020004 +#define F367CAB_TRL_RST 0xf4020002 +#define F367CAB_AGC_RST 0xf4020001 + +/* CTRL_2 */ +#define R367CAB_CTRL_2 0xf403 +#define F367CAB_DEINT_RST 0xf4030008 +#define F367CAB_RS_RST 0xf4030004 + +/* IT_STATUS1 */ +#define R367CAB_IT_STATUS1 0xf408 +#define F367CAB_SWEEP_OUT 0xf4080080 +#define F367CAB_FSM_CRL 0xf4080040 +#define F367CAB_CRL_LOCK 0xf4080020 +#define F367CAB_MFSM 0xf4080010 +#define F367CAB_TRL_LOCK 0xf4080008 +#define F367CAB_TRL_AGC_LIMIT 0xf4080004 +#define F367CAB_ADJ_AGC_LOCK 0xf4080002 +#define F367CAB_AGC_QAM_LOCK 0xf4080001 + +/* IT_STATUS2 */ +#define R367CAB_IT_STATUS2 0xf409 +#define F367CAB_TSMF_CNT 0xf4090080 +#define F367CAB_TSMF_EOF 0xf4090040 +#define F367CAB_TSMF_RDY 0xf4090020 +#define F367CAB_FEC_NOCORR 0xf4090010 +#define F367CAB_SYNCSTATE 0xf4090008 +#define F367CAB_DEINT_LOCK 0xf4090004 +#define F367CAB_FADDING_FRZ 0xf4090002 +#define F367CAB_TAPMON_ALARM 0xf4090001 + +/* IT_EN1 */ +#define R367CAB_IT_EN1 0xf40a +#define F367CAB_SWEEP_OUTE 0xf40a0080 +#define F367CAB_FSM_CRLE 0xf40a0040 +#define F367CAB_CRL_LOCKE 0xf40a0020 +#define F367CAB_MFSME 0xf40a0010 +#define F367CAB_TRL_LOCKE 0xf40a0008 +#define F367CAB_TRL_AGC_LIMITE 0xf40a0004 +#define F367CAB_ADJ_AGC_LOCKE 0xf40a0002 +#define F367CAB_AGC_LOCKE 0xf40a0001 + +/* IT_EN2 */ +#define R367CAB_IT_EN2 0xf40b +#define F367CAB_TSMF_CNTE 0xf40b0080 +#define F367CAB_TSMF_EOFE 0xf40b0040 +#define F367CAB_TSMF_RDYE 0xf40b0020 +#define F367CAB_FEC_NOCORRE 0xf40b0010 +#define F367CAB_SYNCSTATEE 0xf40b0008 +#define F367CAB_DEINT_LOCKE 0xf40b0004 +#define F367CAB_FADDING_FRZE 0xf40b0002 +#define F367CAB_TAPMON_ALARME 0xf40b0001 + +/* CTRL_STATUS */ +#define R367CAB_CTRL_STATUS 0xf40c +#define F367CAB_QAMFEC_LOCK 0xf40c0004 +#define F367CAB_TSMF_LOCK 0xf40c0002 +#define F367CAB_TSMF_ERROR 0xf40c0001 + +/* TEST_CTL */ +#define R367CAB_TEST_CTL 0xf40f +#define F367CAB_TST_BLK_SEL 0xf40f0060 +#define F367CAB_TST_BUS_SEL 0xf40f001f + +/* AGC_CTL */ +#define R367CAB_AGC_CTL 0xf410 +#define F367CAB_AGC_LCK_TH 0xf41000f0 +#define F367CAB_AGC_ACCUMRSTSEL 0xf4100007 + +/* AGC_IF_CFG */ +#define R367CAB_AGC_IF_CFG 0xf411 +#define F367CAB_AGC_IF_BWSEL 0xf41100f0 +#define F367CAB_AGC_IF_FREEZE 0xf4110002 + +/* AGC_RF_CFG */ +#define R367CAB_AGC_RF_CFG 0xf412 +#define F367CAB_AGC_RF_BWSEL 0xf4120070 +#define F367CAB_AGC_RF_FREEZE 0xf4120002 + +/* AGC_PWM_CFG */ +#define R367CAB_AGC_PWM_CFG 0xf413 +#define F367CAB_AGC_RF_PWM_TST 0xf4130080 +#define F367CAB_AGC_RF_PWM_INV 0xf4130040 +#define F367CAB_AGC_IF_PWM_TST 0xf4130008 +#define F367CAB_AGC_IF_PWM_INV 0xf4130004 +#define F367CAB_AGC_PWM_CLKDIV 0xf4130003 + +/* AGC_PWR_REF_L */ +#define R367CAB_AGC_PWR_REF_L 0xf414 +#define F367CAB_AGC_PWRREF_LO 0xf41400ff + +/* AGC_PWR_REF_H */ +#define R367CAB_AGC_PWR_REF_H 0xf415 +#define F367CAB_AGC_PWRREF_HI 0xf4150003 + +/* AGC_RF_TH_L */ +#define R367CAB_AGC_RF_TH_L 0xf416 +#define F367CAB_AGC_RF_TH_LO 0xf41600ff + +/* AGC_RF_TH_H */ +#define R367CAB_AGC_RF_TH_H 0xf417 +#define F367CAB_AGC_RF_TH_HI 0xf417000f + +/* AGC_IF_LTH_L */ +#define R367CAB_AGC_IF_LTH_L 0xf418 +#define F367CAB_AGC_IF_THLO_LO 0xf41800ff + +/* AGC_IF_LTH_H */ +#define R367CAB_AGC_IF_LTH_H 0xf419 +#define F367CAB_AGC_IF_THLO_HI 0xf419000f + +/* AGC_IF_HTH_L */ +#define R367CAB_AGC_IF_HTH_L 0xf41a +#define F367CAB_AGC_IF_THHI_LO 0xf41a00ff + +/* AGC_IF_HTH_H */ +#define R367CAB_AGC_IF_HTH_H 0xf41b +#define F367CAB_AGC_IF_THHI_HI 0xf41b000f + +/* AGC_PWR_RD_L */ +#define R367CAB_AGC_PWR_RD_L 0xf41c +#define F367CAB_AGC_PWR_WORD_LO 0xf41c00ff + +/* AGC_PWR_RD_M */ +#define R367CAB_AGC_PWR_RD_M 0xf41d +#define F367CAB_AGC_PWR_WORD_ME 0xf41d00ff + +/* AGC_PWR_RD_H */ +#define R367CAB_AGC_PWR_RD_H 0xf41e +#define F367CAB_AGC_PWR_WORD_HI 0xf41e0003 + +/* AGC_PWM_IFCMD_L */ +#define R367CAB_AGC_PWM_IFCMD_L 0xf420 +#define F367CAB_AGC_IF_PWMCMD_LO 0xf42000ff + +/* AGC_PWM_IFCMD_H */ +#define R367CAB_AGC_PWM_IFCMD_H 0xf421 +#define F367CAB_AGC_IF_PWMCMD_HI 0xf421000f + +/* AGC_PWM_RFCMD_L */ +#define R367CAB_AGC_PWM_RFCMD_L 0xf422 +#define F367CAB_AGC_RF_PWMCMD_LO 0xf42200ff + +/* AGC_PWM_RFCMD_H */ +#define R367CAB_AGC_PWM_RFCMD_H 0xf423 +#define F367CAB_AGC_RF_PWMCMD_HI 0xf423000f + +/* IQDEM_CFG */ +#define R367CAB_IQDEM_CFG 0xf424 +#define F367CAB_IQDEM_CLK_SEL 0xf4240004 +#define F367CAB_IQDEM_INVIQ 0xf4240002 +#define F367CAB_IQDEM_A2dTYPE 0xf4240001 + +/* MIX_NCO_LL */ +#define R367CAB_MIX_NCO_LL 0xf425 +#define F367CAB_MIX_NCO_INC_LL 0xf42500ff + +/* MIX_NCO_HL */ +#define R367CAB_MIX_NCO_HL 0xf426 +#define F367CAB_MIX_NCO_INC_HL 0xf42600ff + +/* MIX_NCO_HH */ +#define R367CAB_MIX_NCO_HH 0xf427 +#define F367CAB_MIX_NCO_INVCNST 0xf4270080 +#define F367CAB_MIX_NCO_INC_HH 0xf427007f + +/* SRC_NCO_LL */ +#define R367CAB_SRC_NCO_LL 0xf428 +#define F367CAB_SRC_NCO_INC_LL 0xf42800ff + +/* SRC_NCO_LH */ +#define R367CAB_SRC_NCO_LH 0xf429 +#define F367CAB_SRC_NCO_INC_LH 0xf42900ff + +/* SRC_NCO_HL */ +#define R367CAB_SRC_NCO_HL 0xf42a +#define F367CAB_SRC_NCO_INC_HL 0xf42a00ff + +/* SRC_NCO_HH */ +#define R367CAB_SRC_NCO_HH 0xf42b +#define F367CAB_SRC_NCO_INC_HH 0xf42b007f + +/* IQDEM_GAIN_SRC_L */ +#define R367CAB_IQDEM_GAIN_SRC_L 0xf42c +#define F367CAB_GAIN_SRC_LO 0xf42c00ff + +/* IQDEM_GAIN_SRC_H */ +#define R367CAB_IQDEM_GAIN_SRC_H 0xf42d +#define F367CAB_GAIN_SRC_HI 0xf42d0003 + +/* IQDEM_DCRM_CFG_LL */ +#define R367CAB_IQDEM_DCRM_CFG_LL 0xf430 +#define F367CAB_DCRM0_DCIN_L 0xf43000ff + +/* IQDEM_DCRM_CFG_LH */ +#define R367CAB_IQDEM_DCRM_CFG_LH 0xf431 +#define F367CAB_DCRM1_I_DCIN_L 0xf43100fc +#define F367CAB_DCRM0_DCIN_H 0xf4310003 + +/* IQDEM_DCRM_CFG_HL */ +#define R367CAB_IQDEM_DCRM_CFG_HL 0xf432 +#define F367CAB_DCRM1_Q_DCIN_L 0xf43200f0 +#define F367CAB_DCRM1_I_DCIN_H 0xf432000f + +/* IQDEM_DCRM_CFG_HH */ +#define R367CAB_IQDEM_DCRM_CFG_HH 0xf433 +#define F367CAB_DCRM1_FRZ 0xf4330080 +#define F367CAB_DCRM0_FRZ 0xf4330040 +#define F367CAB_DCRM1_Q_DCIN_H 0xf433003f + +/* IQDEM_ADJ_COEFf0 */ +#define R367CAB_IQDEM_ADJ_COEFF0 0xf434 +#define F367CAB_ADJIIR_COEFF10_L 0xf43400ff + +/* IQDEM_ADJ_COEFF1 */ +#define R367CAB_IQDEM_ADJ_COEFF1 0xf435 +#define F367CAB_ADJIIR_COEFF11_L 0xf43500fc +#define F367CAB_ADJIIR_COEFF10_H 0xf4350003 + +/* IQDEM_ADJ_COEFF2 */ +#define R367CAB_IQDEM_ADJ_COEFF2 0xf436 +#define F367CAB_ADJIIR_COEFF12_L 0xf43600f0 +#define F367CAB_ADJIIR_COEFF11_H 0xf436000f + +/* IQDEM_ADJ_COEFF3 */ +#define R367CAB_IQDEM_ADJ_COEFF3 0xf437 +#define F367CAB_ADJIIR_COEFF20_L 0xf43700c0 +#define F367CAB_ADJIIR_COEFF12_H 0xf437003f + +/* IQDEM_ADJ_COEFF4 */ +#define R367CAB_IQDEM_ADJ_COEFF4 0xf438 +#define F367CAB_ADJIIR_COEFF20_H 0xf43800ff + +/* IQDEM_ADJ_COEFF5 */ +#define R367CAB_IQDEM_ADJ_COEFF5 0xf439 +#define F367CAB_ADJIIR_COEFF21_L 0xf43900ff + +/* IQDEM_ADJ_COEFF6 */ +#define R367CAB_IQDEM_ADJ_COEFF6 0xf43a +#define F367CAB_ADJIIR_COEFF22_L 0xf43a00fc +#define F367CAB_ADJIIR_COEFF21_H 0xf43a0003 + +/* IQDEM_ADJ_COEFF7 */ +#define R367CAB_IQDEM_ADJ_COEFF7 0xf43b +#define F367CAB_ADJIIR_COEFF22_H 0xf43b000f + +/* IQDEM_ADJ_EN */ +#define R367CAB_IQDEM_ADJ_EN 0xf43c +#define F367CAB_ALLPASSFILT_EN 0xf43c0008 +#define F367CAB_ADJ_AGC_EN 0xf43c0004 +#define F367CAB_ADJ_COEFF_FRZ 0xf43c0002 +#define F367CAB_ADJ_EN 0xf43c0001 + +/* IQDEM_ADJ_AGC_REF */ +#define R367CAB_IQDEM_ADJ_AGC_REF 0xf43d +#define F367CAB_ADJ_AGC_REF 0xf43d00ff + +/* ALLPASSFILT1 */ +#define R367CAB_ALLPASSFILT1 0xf440 +#define F367CAB_ALLPASSFILT_COEFF1_LO 0xf44000ff + +/* ALLPASSFILT2 */ +#define R367CAB_ALLPASSFILT2 0xf441 +#define F367CAB_ALLPASSFILT_COEFF1_ME 0xf44100ff + +/* ALLPASSFILT3 */ +#define R367CAB_ALLPASSFILT3 0xf442 +#define F367CAB_ALLPASSFILT_COEFF2_LO 0xf44200c0 +#define F367CAB_ALLPASSFILT_COEFF1_HI 0xf442003f + +/* ALLPASSFILT4 */ +#define R367CAB_ALLPASSFILT4 0xf443 +#define F367CAB_ALLPASSFILT_COEFF2_MEL 0xf44300ff + +/* ALLPASSFILT5 */ +#define R367CAB_ALLPASSFILT5 0xf444 +#define F367CAB_ALLPASSFILT_COEFF2_MEH 0xf44400ff + +/* ALLPASSFILT6 */ +#define R367CAB_ALLPASSFILT6 0xf445 +#define F367CAB_ALLPASSFILT_COEFF3_LO 0xf44500f0 +#define F367CAB_ALLPASSFILT_COEFF2_HI 0xf445000f + +/* ALLPASSFILT7 */ +#define R367CAB_ALLPASSFILT7 0xf446 +#define F367CAB_ALLPASSFILT_COEFF3_MEL 0xf44600ff + +/* ALLPASSFILT8 */ +#define R367CAB_ALLPASSFILT8 0xf447 +#define F367CAB_ALLPASSFILT_COEFF3_MEH 0xf44700ff + +/* ALLPASSFILT9 */ +#define R367CAB_ALLPASSFILT9 0xf448 +#define F367CAB_ALLPASSFILT_COEFF4_LO 0xf44800fc +#define F367CAB_ALLPASSFILT_COEFF3_HI 0xf4480003 + +/* ALLPASSFILT10 */ +#define R367CAB_ALLPASSFILT10 0xf449 +#define F367CAB_ALLPASSFILT_COEFF4_ME 0xf44900ff + +/* ALLPASSFILT11 */ +#define R367CAB_ALLPASSFILT11 0xf44a +#define F367CAB_ALLPASSFILT_COEFF4_HI 0xf44a00ff + +/* TRL_AGC_CFG */ +#define R367CAB_TRL_AGC_CFG 0xf450 +#define F367CAB_TRL_AGC_FREEZE 0xf4500080 +#define F367CAB_TRL_AGC_REF 0xf450007f + +/* TRL_LPF_CFG */ +#define R367CAB_TRL_LPF_CFG 0xf454 +#define F367CAB_NYQPOINT_INV 0xf4540040 +#define F367CAB_TRL_SHIFT 0xf4540030 +#define F367CAB_NYQ_COEFF_SEL 0xf454000c +#define F367CAB_TRL_LPF_FREEZE 0xf4540002 +#define F367CAB_TRL_LPF_CRT 0xf4540001 + +/* TRL_LPF_ACQ_GAIN */ +#define R367CAB_TRL_LPF_ACQ_GAIN 0xf455 +#define F367CAB_TRL_GDIR_ACQ 0xf4550070 +#define F367CAB_TRL_GINT_ACQ 0xf4550007 + +/* TRL_LPF_TRK_GAIN */ +#define R367CAB_TRL_LPF_TRK_GAIN 0xf456 +#define F367CAB_TRL_GDIR_TRK 0xf4560070 +#define F367CAB_TRL_GINT_TRK 0xf4560007 + +/* TRL_LPF_OUT_GAIN */ +#define R367CAB_TRL_LPF_OUT_GAIN 0xf457 +#define F367CAB_TRL_GAIN_OUT 0xf4570007 + +/* TRL_LOCKDET_LTH */ +#define R367CAB_TRL_LOCKDET_LTH 0xf458 +#define F367CAB_TRL_LCK_THLO 0xf4580007 + +/* TRL_LOCKDET_HTH */ +#define R367CAB_TRL_LOCKDET_HTH 0xf459 +#define F367CAB_TRL_LCK_THHI 0xf45900ff + +/* TRL_LOCKDET_TRGVAL */ +#define R367CAB_TRL_LOCKDET_TRGVAL 0xf45a +#define F367CAB_TRL_LCK_TRG 0xf45a00ff + +/* IQ_QAM */ +#define R367CAB_IQ_QAM 0xf45c +#define F367CAB_IQ_INPUT 0xf45c0008 +#define F367CAB_DETECT_MODE 0xf45c0007 + +/* FSM_STATE */ +#define R367CAB_FSM_STATE 0xf460 +#define F367CAB_CRL_DFE 0xf4600080 +#define F367CAB_DFE_START 0xf4600040 +#define F367CAB_CTRLG_START 0xf4600030 +#define F367CAB_FSM_FORCESTATE 0xf460000f + +/* FSM_CTL */ +#define R367CAB_FSM_CTL 0xf461 +#define F367CAB_FEC2_EN 0xf4610040 +#define F367CAB_SIT_EN 0xf4610020 +#define F367CAB_TRL_AHEAD 0xf4610010 +#define F367CAB_TRL2_EN 0xf4610008 +#define F367CAB_FSM_EQA1_EN 0xf4610004 +#define F367CAB_FSM_BKP_DIS 0xf4610002 +#define F367CAB_FSM_FORCE_EN 0xf4610001 + +/* FSM_STS */ +#define R367CAB_FSM_STS 0xf462 +#define F367CAB_FSM_STATUS 0xf462000f + +/* FSM_SNR0_HTH */ +#define R367CAB_FSM_SNR0_HTH 0xf463 +#define F367CAB_SNR0_HTH 0xf46300ff + +/* FSM_SNR1_HTH */ +#define R367CAB_FSM_SNR1_HTH 0xf464 +#define F367CAB_SNR1_HTH 0xf46400ff + +/* FSM_SNR2_HTH */ +#define R367CAB_FSM_SNR2_HTH 0xf465 +#define F367CAB_SNR2_HTH 0xf46500ff + +/* FSM_SNR0_LTH */ +#define R367CAB_FSM_SNR0_LTH 0xf466 +#define F367CAB_SNR0_LTH 0xf46600ff + +/* FSM_SNR1_LTH */ +#define R367CAB_FSM_SNR1_LTH 0xf467 +#define F367CAB_SNR1_LTH 0xf46700ff + +/* FSM_EQA1_HTH */ +#define R367CAB_FSM_EQA1_HTH 0xf468 +#define F367CAB_SNR3_HTH_LO 0xf46800f0 +#define F367CAB_EQA1_HTH 0xf468000f + +/* FSM_TEMPO */ +#define R367CAB_FSM_TEMPO 0xf469 +#define F367CAB_SIT 0xf46900c0 +#define F367CAB_WST 0xf4690038 +#define F367CAB_ELT 0xf4690006 +#define F367CAB_SNR3_HTH_HI 0xf4690001 + +/* FSM_CONFIG */ +#define R367CAB_FSM_CONFIG 0xf46a +#define F367CAB_FEC2_DFEOFF 0xf46a0004 +#define F367CAB_PRIT_STATE 0xf46a0002 +#define F367CAB_MODMAP_STATE 0xf46a0001 + +/* EQU_I_TESTTAP_L */ +#define R367CAB_EQU_I_TESTTAP_L 0xf474 +#define F367CAB_I_TEST_TAP_L 0xf47400ff + +/* EQU_I_TESTTAP_M */ +#define R367CAB_EQU_I_TESTTAP_M 0xf475 +#define F367CAB_I_TEST_TAP_M 0xf47500ff + +/* EQU_I_TESTTAP_H */ +#define R367CAB_EQU_I_TESTTAP_H 0xf476 +#define F367CAB_I_TEST_TAP_H 0xf476001f + +/* EQU_TESTAP_CFG */ +#define R367CAB_EQU_TESTAP_CFG 0xf477 +#define F367CAB_TEST_FFE_DFE_SEL 0xf4770040 +#define F367CAB_TEST_TAP_SELECT 0xf477003f + +/* EQU_Q_TESTTAP_L */ +#define R367CAB_EQU_Q_TESTTAP_L 0xf478 +#define F367CAB_Q_TEST_TAP_L 0xf47800ff + +/* EQU_Q_TESTTAP_M */ +#define R367CAB_EQU_Q_TESTTAP_M 0xf479 +#define F367CAB_Q_TEST_TAP_M 0xf47900ff + +/* EQU_Q_TESTTAP_H */ +#define R367CAB_EQU_Q_TESTTAP_H 0xf47a +#define F367CAB_Q_TEST_TAP_H 0xf47a001f + +/* EQU_TAP_CTRL */ +#define R367CAB_EQU_TAP_CTRL 0xf47b +#define F367CAB_MTAP_FRZ 0xf47b0010 +#define F367CAB_PRE_FREEZE 0xf47b0008 +#define F367CAB_DFE_TAPMON_EN 0xf47b0004 +#define F367CAB_FFE_TAPMON_EN 0xf47b0002 +#define F367CAB_MTAP_ONLY 0xf47b0001 + +/* EQU_CTR_CRL_CONTROL_L */ +#define R367CAB_EQU_CTR_CRL_CONTROL_L 0xf47c +#define F367CAB_EQU_CTR_CRL_CONTROL_LO 0xf47c00ff + +/* EQU_CTR_CRL_CONTROL_H */ +#define R367CAB_EQU_CTR_CRL_CONTROL_H 0xf47d +#define F367CAB_EQU_CTR_CRL_CONTROL_HI 0xf47d00ff + +/* EQU_CTR_HIPOW_L */ +#define R367CAB_EQU_CTR_HIPOW_L 0xf47e +#define F367CAB_CTR_HIPOW_L 0xf47e00ff + +/* EQU_CTR_HIPOW_H */ +#define R367CAB_EQU_CTR_HIPOW_H 0xf47f +#define F367CAB_CTR_HIPOW_H 0xf47f00ff + +/* EQU_I_EQU_LO */ +#define R367CAB_EQU_I_EQU_LO 0xf480 +#define F367CAB_EQU_I_EQU_L 0xf48000ff + +/* EQU_I_EQU_HI */ +#define R367CAB_EQU_I_EQU_HI 0xf481 +#define F367CAB_EQU_I_EQU_H 0xf4810003 + +/* EQU_Q_EQU_LO */ +#define R367CAB_EQU_Q_EQU_LO 0xf482 +#define F367CAB_EQU_Q_EQU_L 0xf48200ff + +/* EQU_Q_EQU_HI */ +#define R367CAB_EQU_Q_EQU_HI 0xf483 +#define F367CAB_EQU_Q_EQU_H 0xf4830003 + +/* EQU_MAPPER */ +#define R367CAB_EQU_MAPPER 0xf484 +#define F367CAB_QUAD_AUTO 0xf4840080 +#define F367CAB_QUAD_INV 0xf4840040 +#define F367CAB_QAM_MODE 0xf4840007 + +/* EQU_SWEEP_RATE */ +#define R367CAB_EQU_SWEEP_RATE 0xf485 +#define F367CAB_SNR_PER 0xf48500c0 +#define F367CAB_SWEEP_RATE 0xf485003f + +/* EQU_SNR_LO */ +#define R367CAB_EQU_SNR_LO 0xf486 +#define F367CAB_SNR_LO 0xf48600ff + +/* EQU_SNR_HI */ +#define R367CAB_EQU_SNR_HI 0xf487 +#define F367CAB_SNR_HI 0xf48700ff + +/* EQU_GAMMA_LO */ +#define R367CAB_EQU_GAMMA_LO 0xf488 +#define F367CAB_GAMMA_LO 0xf48800ff + +/* EQU_GAMMA_HI */ +#define R367CAB_EQU_GAMMA_HI 0xf489 +#define F367CAB_GAMMA_ME 0xf48900ff + +/* EQU_ERR_GAIN */ +#define R367CAB_EQU_ERR_GAIN 0xf48a +#define F367CAB_EQA1MU 0xf48a0070 +#define F367CAB_CRL2MU 0xf48a000e +#define F367CAB_GAMMA_HI 0xf48a0001 + +/* EQU_RADIUS */ +#define R367CAB_EQU_RADIUS 0xf48b +#define F367CAB_RADIUS 0xf48b00ff + +/* EQU_FFE_MAINTAP */ +#define R367CAB_EQU_FFE_MAINTAP 0xf48c +#define F367CAB_FFE_MAINTAP_INIT 0xf48c00ff + +/* EQU_FFE_LEAKAGE */ +#define R367CAB_EQU_FFE_LEAKAGE 0xf48e +#define F367CAB_LEAK_PER 0xf48e00f0 +#define F367CAB_EQU_OUTSEL 0xf48e0002 +#define F367CAB_PNT2dFE 0xf48e0001 + +/* EQU_FFE_MAINTAP_POS */ +#define R367CAB_EQU_FFE_MAINTAP_POS 0xf48f +#define F367CAB_FFE_LEAK_EN 0xf48f0080 +#define F367CAB_DFE_LEAK_EN 0xf48f0040 +#define F367CAB_FFE_MAINTAP_POS 0xf48f003f + +/* EQU_GAIN_WIDE */ +#define R367CAB_EQU_GAIN_WIDE 0xf490 +#define F367CAB_DFE_GAIN_WIDE 0xf49000f0 +#define F367CAB_FFE_GAIN_WIDE 0xf490000f + +/* EQU_GAIN_NARROW */ +#define R367CAB_EQU_GAIN_NARROW 0xf491 +#define F367CAB_DFE_GAIN_NARROW 0xf49100f0 +#define F367CAB_FFE_GAIN_NARROW 0xf491000f + +/* EQU_CTR_LPF_GAIN */ +#define R367CAB_EQU_CTR_LPF_GAIN 0xf492 +#define F367CAB_CTR_GTO 0xf4920080 +#define F367CAB_CTR_GDIR 0xf4920070 +#define F367CAB_SWEEP_EN 0xf4920008 +#define F367CAB_CTR_GINT 0xf4920007 + +/* EQU_CRL_LPF_GAIN */ +#define R367CAB_EQU_CRL_LPF_GAIN 0xf493 +#define F367CAB_CRL_GTO 0xf4930080 +#define F367CAB_CRL_GDIR 0xf4930070 +#define F367CAB_SWEEP_DIR 0xf4930008 +#define F367CAB_CRL_GINT 0xf4930007 + +/* EQU_GLOBAL_GAIN */ +#define R367CAB_EQU_GLOBAL_GAIN 0xf494 +#define F367CAB_CRL_GAIN 0xf49400f8 +#define F367CAB_CTR_INC_GAIN 0xf4940004 +#define F367CAB_CTR_FRAC 0xf4940003 + +/* EQU_CRL_LD_SEN */ +#define R367CAB_EQU_CRL_LD_SEN 0xf495 +#define F367CAB_CTR_BADPOINT_EN 0xf4950080 +#define F367CAB_CTR_GAIN 0xf4950070 +#define F367CAB_LIMANEN 0xf4950008 +#define F367CAB_CRL_LD_SEN 0xf4950007 + +/* EQU_CRL_LD_VAL */ +#define R367CAB_EQU_CRL_LD_VAL 0xf496 +#define F367CAB_CRL_BISTH_LIMIT 0xf4960080 +#define F367CAB_CARE_EN 0xf4960040 +#define F367CAB_CRL_LD_PER 0xf4960030 +#define F367CAB_CRL_LD_WST 0xf496000c +#define F367CAB_CRL_LD_TFS 0xf4960003 + +/* EQU_CRL_TFR */ +#define R367CAB_EQU_CRL_TFR 0xf497 +#define F367CAB_CRL_LD_TFR 0xf49700ff + +/* EQU_CRL_BISTH_LO */ +#define R367CAB_EQU_CRL_BISTH_LO 0xf498 +#define F367CAB_CRL_BISTH_LO 0xf49800ff + +/* EQU_CRL_BISTH_HI */ +#define R367CAB_EQU_CRL_BISTH_HI 0xf499 +#define F367CAB_CRL_BISTH_HI 0xf49900ff + +/* EQU_SWEEP_RANGE_LO */ +#define R367CAB_EQU_SWEEP_RANGE_LO 0xf49a +#define F367CAB_SWEEP_RANGE_LO 0xf49a00ff + +/* EQU_SWEEP_RANGE_HI */ +#define R367CAB_EQU_SWEEP_RANGE_HI 0xf49b +#define F367CAB_SWEEP_RANGE_HI 0xf49b00ff + +/* EQU_CRL_LIMITER */ +#define R367CAB_EQU_CRL_LIMITER 0xf49c +#define F367CAB_BISECTOR_EN 0xf49c0080 +#define F367CAB_PHEST128_EN 0xf49c0040 +#define F367CAB_CRL_LIM 0xf49c003f + +/* EQU_MODULUS_MAP */ +#define R367CAB_EQU_MODULUS_MAP 0xf49d +#define F367CAB_PNT_DEPTH 0xf49d00e0 +#define F367CAB_MODULUS_CMP 0xf49d001f + +/* EQU_PNT_GAIN */ +#define R367CAB_EQU_PNT_GAIN 0xf49e +#define F367CAB_PNT_EN 0xf49e0080 +#define F367CAB_MODULUSMAP_EN 0xf49e0040 +#define F367CAB_PNT_GAIN 0xf49e003f + +/* FEC_AC_CTR_0 */ +#define R367CAB_FEC_AC_CTR_0 0xf4a8 +#define F367CAB_BE_BYPASS 0xf4a80020 +#define F367CAB_REFRESH47 0xf4a80010 +#define F367CAB_CT_NBST 0xf4a80008 +#define F367CAB_TEI_ENA 0xf4a80004 +#define F367CAB_DS_ENA 0xf4a80002 +#define F367CAB_TSMF_EN 0xf4a80001 + +/* FEC_AC_CTR_1 */ +#define R367CAB_FEC_AC_CTR_1 0xf4a9 +#define F367CAB_DEINT_DEPTH 0xf4a900ff + +/* FEC_AC_CTR_2 */ +#define R367CAB_FEC_AC_CTR_2 0xf4aa +#define F367CAB_DEINT_M 0xf4aa00f8 +#define F367CAB_DIS_UNLOCK 0xf4aa0004 +#define F367CAB_DESCR_MODE 0xf4aa0003 + +/* FEC_AC_CTR_3 */ +#define R367CAB_FEC_AC_CTR_3 0xf4ab +#define F367CAB_DI_UNLOCK 0xf4ab0080 +#define F367CAB_DI_FREEZE 0xf4ab0040 +#define F367CAB_MISMATCH 0xf4ab0030 +#define F367CAB_ACQ_MODE 0xf4ab000c +#define F367CAB_TRK_MODE 0xf4ab0003 + +/* FEC_STATUS */ +#define R367CAB_FEC_STATUS 0xf4ac +#define F367CAB_DEINT_SMCNTR 0xf4ac00e0 +#define F367CAB_DEINT_SYNCSTATE 0xf4ac0018 +#define F367CAB_DEINT_SYNLOST 0xf4ac0004 +#define F367CAB_DESCR_SYNCSTATE 0xf4ac0002 + +/* RS_COUNTER_0 */ +#define R367CAB_RS_COUNTER_0 0xf4ae +#define F367CAB_BK_CT_L 0xf4ae00ff + +/* RS_COUNTER_1 */ +#define R367CAB_RS_COUNTER_1 0xf4af +#define F367CAB_BK_CT_H 0xf4af00ff + +/* RS_COUNTER_2 */ +#define R367CAB_RS_COUNTER_2 0xf4b0 +#define F367CAB_CORR_CT_L 0xf4b000ff + +/* RS_COUNTER_3 */ +#define R367CAB_RS_COUNTER_3 0xf4b1 +#define F367CAB_CORR_CT_H 0xf4b100ff + +/* RS_COUNTER_4 */ +#define R367CAB_RS_COUNTER_4 0xf4b2 +#define F367CAB_UNCORR_CT_L 0xf4b200ff + +/* RS_COUNTER_5 */ +#define R367CAB_RS_COUNTER_5 0xf4b3 +#define F367CAB_UNCORR_CT_H 0xf4b300ff + +/* BERT_0 */ +#define R367CAB_BERT_0 0xf4b4 +#define F367CAB_RS_NOCORR 0xf4b40004 +#define F367CAB_CT_HOLD 0xf4b40002 +#define F367CAB_CT_CLEAR 0xf4b40001 + +/* BERT_1 */ +#define R367CAB_BERT_1 0xf4b5 +#define F367CAB_BERT_ON 0xf4b50020 +#define F367CAB_BERT_ERR_SRC 0xf4b50010 +#define F367CAB_BERT_ERR_MODE 0xf4b50008 +#define F367CAB_BERT_NBYTE 0xf4b50007 + +/* BERT_2 */ +#define R367CAB_BERT_2 0xf4b6 +#define F367CAB_BERT_ERRCOUNT_L 0xf4b600ff + +/* BERT_3 */ +#define R367CAB_BERT_3 0xf4b7 +#define F367CAB_BERT_ERRCOUNT_H 0xf4b700ff + +/* OUTFORMAT_0 */ +#define R367CAB_OUTFORMAT_0 0xf4b8 +#define F367CAB_CLK_POLARITY 0xf4b80080 +#define F367CAB_FEC_TYPE 0xf4b80040 +#define F367CAB_SYNC_STRIP 0xf4b80008 +#define F367CAB_TS_SWAP 0xf4b80004 +#define F367CAB_OUTFORMAT 0xf4b80003 + +/* OUTFORMAT_1 */ +#define R367CAB_OUTFORMAT_1 0xf4b9 +#define F367CAB_CI_DIVRANGE 0xf4b900ff + +/* SMOOTHER_2 */ +#define R367CAB_SMOOTHER_2 0xf4be +#define F367CAB_FIFO_BYPASS 0xf4be0020 + +/* TSMF_CTRL_0 */ +#define R367CAB_TSMF_CTRL_0 0xf4c0 +#define F367CAB_TS_NUMBER 0xf4c0001e +#define F367CAB_SEL_MODE 0xf4c00001 + +/* TSMF_CTRL_1 */ +#define R367CAB_TSMF_CTRL_1 0xf4c1 +#define F367CAB_CHECK_ERROR_BIT 0xf4c10080 +#define F367CAB_CHCK_F_SYNC 0xf4c10040 +#define F367CAB_H_MODE 0xf4c10008 +#define F367CAB_D_V_MODE 0xf4c10004 +#define F367CAB_MODE 0xf4c10003 + +/* TSMF_CTRL_3 */ +#define R367CAB_TSMF_CTRL_3 0xf4c3 +#define F367CAB_SYNC_IN_COUNT 0xf4c300f0 +#define F367CAB_SYNC_OUT_COUNT 0xf4c3000f + +/* TS_ON_ID_0 */ +#define R367CAB_TS_ON_ID_0 0xf4c4 +#define F367CAB_TS_ID_L 0xf4c400ff + +/* TS_ON_ID_1 */ +#define R367CAB_TS_ON_ID_1 0xf4c5 +#define F367CAB_TS_ID_H 0xf4c500ff + +/* TS_ON_ID_2 */ +#define R367CAB_TS_ON_ID_2 0xf4c6 +#define F367CAB_ON_ID_L 0xf4c600ff + +/* TS_ON_ID_3 */ +#define R367CAB_TS_ON_ID_3 0xf4c7 +#define F367CAB_ON_ID_H 0xf4c700ff + +/* RE_STATUS_0 */ +#define R367CAB_RE_STATUS_0 0xf4c8 +#define F367CAB_RECEIVE_STATUS_L 0xf4c800ff + +/* RE_STATUS_1 */ +#define R367CAB_RE_STATUS_1 0xf4c9 +#define F367CAB_RECEIVE_STATUS_LH 0xf4c900ff + +/* RE_STATUS_2 */ +#define R367CAB_RE_STATUS_2 0xf4ca +#define F367CAB_RECEIVE_STATUS_HL 0xf4ca00ff + +/* RE_STATUS_3 */ +#define R367CAB_RE_STATUS_3 0xf4cb +#define F367CAB_RECEIVE_STATUS_HH 0xf4cb003f + +/* TS_STATUS_0 */ +#define R367CAB_TS_STATUS_0 0xf4cc +#define F367CAB_TS_STATUS_L 0xf4cc00ff + +/* TS_STATUS_1 */ +#define R367CAB_TS_STATUS_1 0xf4cd +#define F367CAB_TS_STATUS_H 0xf4cd007f + +/* TS_STATUS_2 */ +#define R367CAB_TS_STATUS_2 0xf4ce +#define F367CAB_ERROR 0xf4ce0080 +#define F367CAB_EMERGENCY 0xf4ce0040 +#define F367CAB_CRE_TS 0xf4ce0030 +#define F367CAB_VER 0xf4ce000e +#define F367CAB_M_LOCK 0xf4ce0001 + +/* TS_STATUS_3 */ +#define R367CAB_TS_STATUS_3 0xf4cf +#define F367CAB_UPDATE_READY 0xf4cf0080 +#define F367CAB_END_FRAME_HEADER 0xf4cf0040 +#define F367CAB_CONTCNT 0xf4cf0020 +#define F367CAB_TS_IDENTIFIER_SEL 0xf4cf000f + +/* T_O_ID_0 */ +#define R367CAB_T_O_ID_0 0xf4d0 +#define F367CAB_ON_ID_I_L 0xf4d000ff + +/* T_O_ID_1 */ +#define R367CAB_T_O_ID_1 0xf4d1 +#define F367CAB_ON_ID_I_H 0xf4d100ff + +/* T_O_ID_2 */ +#define R367CAB_T_O_ID_2 0xf4d2 +#define F367CAB_TS_ID_I_L 0xf4d200ff + +/* T_O_ID_3 */ +#define R367CAB_T_O_ID_3 0xf4d3 +#define F367CAB_TS_ID_I_H 0xf4d300ff + +#define STV0367CAB_NBREGS 187 + +#endif diff --git a/drivers/media/dvb-frontends/stv0900.h b/drivers/media/dvb-frontends/stv0900.h new file mode 100644 index 00000000..e2a6dc69 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0900.h @@ -0,0 +1,74 @@ +/* + * stv0900.h + * + * Driver for ST STV0900 satellite demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef STV0900_H +#define STV0900_H + +#include +#include +#include "dvb_frontend.h" + +struct stv0900_reg { + u16 addr; + u8 val; +}; + +struct stv0900_config { + u8 demod_address; + u8 demod_mode; + u32 xtal; + u8 clkmode;/* 0 for CLKI, 2 for XTALI */ + + u8 diseqc_mode; + + u8 path1_mode; + u8 path2_mode; + struct stv0900_reg *ts_config_regs; + u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */ + u8 tun2_maddress; + u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */ + u8 tun2_adc; + u8 tun1_type;/* for now 3 for stb6100 auto, else - software */ + u8 tun2_type; + /* Set device param to start dma */ + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); + /* Hook for Lock LED */ + void (*set_lock_led)(struct dvb_frontend *fe, int offon); +}; + +#if IS_ENABLED(CONFIG_DVB_STV0900) +extern struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, + struct i2c_adapter *i2c, int demod); +#else +static inline struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, + struct i2c_adapter *i2c, int demod) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif + diff --git a/drivers/media/dvb-frontends/stv0900_core.c b/drivers/media/dvb-frontends/stv0900_core.c new file mode 100644 index 00000000..e5a87b57 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0900_core.c @@ -0,0 +1,1979 @@ +/* + * stv0900_core.c + * + * Driver for ST STV0900 satellite demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "stv0900.h" +#include "stv0900_reg.h" +#include "stv0900_priv.h" +#include "stv0900_init.h" + +int stvdebug = 1; +module_param_named(debug, stvdebug, int, 0644); + +/* internal params node */ +struct stv0900_inode { + /* pointer for internal params, one for each pair of demods */ + struct stv0900_internal *internal; + struct stv0900_inode *next_inode; +}; + +/* first internal params */ +static struct stv0900_inode *stv0900_first_inode; + +/* find chip by i2c adapter and i2c address */ +static struct stv0900_inode *find_inode(struct i2c_adapter *i2c_adap, + u8 i2c_addr) +{ + struct stv0900_inode *temp_chip = stv0900_first_inode; + + if (temp_chip != NULL) { + /* + Search of the last stv0900 chip or + find it by i2c adapter and i2c address */ + while ((temp_chip != NULL) && + ((temp_chip->internal->i2c_adap != i2c_adap) || + (temp_chip->internal->i2c_addr != i2c_addr))) + + temp_chip = temp_chip->next_inode; + + } + + return temp_chip; +} + +/* deallocating chip */ +static void remove_inode(struct stv0900_internal *internal) +{ + struct stv0900_inode *prev_node = stv0900_first_inode; + struct stv0900_inode *del_node = find_inode(internal->i2c_adap, + internal->i2c_addr); + + if (del_node != NULL) { + if (del_node == stv0900_first_inode) { + stv0900_first_inode = del_node->next_inode; + } else { + while (prev_node->next_inode != del_node) + prev_node = prev_node->next_inode; + + if (del_node->next_inode == NULL) + prev_node->next_inode = NULL; + else + prev_node->next_inode = + prev_node->next_inode->next_inode; + } + + kfree(del_node); + } +} + +/* allocating new chip */ +static struct stv0900_inode *append_internal(struct stv0900_internal *internal) +{ + struct stv0900_inode *new_node = stv0900_first_inode; + + if (new_node == NULL) { + new_node = kmalloc(sizeof(struct stv0900_inode), GFP_KERNEL); + stv0900_first_inode = new_node; + } else { + while (new_node->next_inode != NULL) + new_node = new_node->next_inode; + + new_node->next_inode = kmalloc(sizeof(struct stv0900_inode), + GFP_KERNEL); + if (new_node->next_inode != NULL) + new_node = new_node->next_inode; + else + new_node = NULL; + } + + if (new_node != NULL) { + new_node->internal = internal; + new_node->next_inode = NULL; + } + + return new_node; +} + +s32 ge2comp(s32 a, s32 width) +{ + if (width == 32) + return a; + else + return (a >= (1 << (width - 1))) ? (a - (1 << width)) : a; +} + +void stv0900_write_reg(struct stv0900_internal *intp, u16 reg_addr, + u8 reg_data) +{ + u8 data[3]; + int ret; + struct i2c_msg i2cmsg = { + .addr = intp->i2c_addr, + .flags = 0, + .len = 3, + .buf = data, + }; + + data[0] = MSB(reg_addr); + data[1] = LSB(reg_addr); + data[2] = reg_data; + + ret = i2c_transfer(intp->i2c_adap, &i2cmsg, 1); + if (ret != 1) + dprintk("%s: i2c error %d\n", __func__, ret); +} + +u8 stv0900_read_reg(struct stv0900_internal *intp, u16 reg) +{ + int ret; + u8 b0[] = { MSB(reg), LSB(reg) }; + u8 buf = 0; + struct i2c_msg msg[] = { + { + .addr = intp->i2c_addr, + .flags = 0, + .buf = b0, + .len = 2, + }, { + .addr = intp->i2c_addr, + .flags = I2C_M_RD, + .buf = &buf, + .len = 1, + }, + }; + + ret = i2c_transfer(intp->i2c_adap, msg, 2); + if (ret != 2) + dprintk("%s: i2c error %d, reg[0x%02x]\n", + __func__, ret, reg); + + return buf; +} + +static void extract_mask_pos(u32 label, u8 *mask, u8 *pos) +{ + u8 position = 0, i = 0; + + (*mask) = label & 0xff; + + while ((position == 0) && (i < 8)) { + position = ((*mask) >> i) & 0x01; + i++; + } + + (*pos) = (i - 1); +} + +void stv0900_write_bits(struct stv0900_internal *intp, u32 label, u8 val) +{ + u8 reg, mask, pos; + + reg = stv0900_read_reg(intp, (label >> 16) & 0xffff); + extract_mask_pos(label, &mask, &pos); + + val = mask & (val << pos); + + reg = (reg & (~mask)) | val; + stv0900_write_reg(intp, (label >> 16) & 0xffff, reg); + +} + +u8 stv0900_get_bits(struct stv0900_internal *intp, u32 label) +{ + u8 val = 0xff; + u8 mask, pos; + + extract_mask_pos(label, &mask, &pos); + + val = stv0900_read_reg(intp, label >> 16); + val = (val & mask) >> pos; + + return val; +} + +static enum fe_stv0900_error stv0900_initialize(struct stv0900_internal *intp) +{ + s32 i; + + if (intp == NULL) + return STV0900_INVALID_HANDLE; + + intp->chip_id = stv0900_read_reg(intp, R0900_MID); + + if (intp->errs != STV0900_NO_ERROR) + return intp->errs; + + /*Startup sequence*/ + stv0900_write_reg(intp, R0900_P1_DMDISTATE, 0x5c); + stv0900_write_reg(intp, R0900_P2_DMDISTATE, 0x5c); + msleep(3); + stv0900_write_reg(intp, R0900_P1_TNRCFG, 0x6c); + stv0900_write_reg(intp, R0900_P2_TNRCFG, 0x6f); + stv0900_write_reg(intp, R0900_P1_I2CRPT, 0x20); + stv0900_write_reg(intp, R0900_P2_I2CRPT, 0x20); + stv0900_write_reg(intp, R0900_NCOARSE, 0x13); + msleep(3); + stv0900_write_reg(intp, R0900_I2CCFG, 0x08); + + switch (intp->clkmode) { + case 0: + case 2: + stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 + | intp->clkmode); + break; + default: + /* preserve SELOSCI bit */ + i = 0x02 & stv0900_read_reg(intp, R0900_SYNTCTRL); + stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | i); + break; + } + + msleep(3); + for (i = 0; i < 181; i++) + stv0900_write_reg(intp, STV0900_InitVal[i][0], + STV0900_InitVal[i][1]); + + if (stv0900_read_reg(intp, R0900_MID) >= 0x20) { + stv0900_write_reg(intp, R0900_TSGENERAL, 0x0c); + for (i = 0; i < 32; i++) + stv0900_write_reg(intp, STV0900_Cut20_AddOnVal[i][0], + STV0900_Cut20_AddOnVal[i][1]); + } + + stv0900_write_reg(intp, R0900_P1_FSPYCFG, 0x6c); + stv0900_write_reg(intp, R0900_P2_FSPYCFG, 0x6c); + + stv0900_write_reg(intp, R0900_P1_PDELCTRL2, 0x01); + stv0900_write_reg(intp, R0900_P2_PDELCTRL2, 0x21); + + stv0900_write_reg(intp, R0900_P1_PDELCTRL3, 0x20); + stv0900_write_reg(intp, R0900_P2_PDELCTRL3, 0x20); + + stv0900_write_reg(intp, R0900_TSTRES0, 0x80); + stv0900_write_reg(intp, R0900_TSTRES0, 0x00); + + return STV0900_NO_ERROR; +} + +static u32 stv0900_get_mclk_freq(struct stv0900_internal *intp, u32 ext_clk) +{ + u32 mclk = 90000000, div = 0, ad_div = 0; + + div = stv0900_get_bits(intp, F0900_M_DIV); + ad_div = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6); + + mclk = (div + 1) * ext_clk / ad_div; + + dprintk("%s: Calculated Mclk = %d\n", __func__, mclk); + + return mclk; +} + +static enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *intp, u32 mclk) +{ + u32 m_div, clk_sel; + + if (intp == NULL) + return STV0900_INVALID_HANDLE; + + if (intp->errs) + return STV0900_I2C_ERROR; + + dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk, + intp->quartz); + + clk_sel = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6); + m_div = ((clk_sel * mclk) / intp->quartz) - 1; + stv0900_write_bits(intp, F0900_M_DIV, m_div); + intp->mclk = stv0900_get_mclk_freq(intp, + intp->quartz); + + /*Set the DiseqC frequency to 22KHz */ + /* + Formula: + DiseqC_TX_Freq= MasterClock/(32*F22TX_Reg) + DiseqC_RX_Freq= MasterClock/(32*F22RX_Reg) + */ + m_div = intp->mclk / 704000; + stv0900_write_reg(intp, R0900_P1_F22TX, m_div); + stv0900_write_reg(intp, R0900_P1_F22RX, m_div); + + stv0900_write_reg(intp, R0900_P2_F22TX, m_div); + stv0900_write_reg(intp, R0900_P2_F22RX, m_div); + + if ((intp->errs)) + return STV0900_I2C_ERROR; + + return STV0900_NO_ERROR; +} + +static u32 stv0900_get_err_count(struct stv0900_internal *intp, int cntr, + enum fe_stv0900_demod_num demod) +{ + u32 lsb, msb, hsb, err_val; + + switch (cntr) { + case 0: + default: + hsb = stv0900_get_bits(intp, ERR_CNT12); + msb = stv0900_get_bits(intp, ERR_CNT11); + lsb = stv0900_get_bits(intp, ERR_CNT10); + break; + case 1: + hsb = stv0900_get_bits(intp, ERR_CNT22); + msb = stv0900_get_bits(intp, ERR_CNT21); + lsb = stv0900_get_bits(intp, ERR_CNT20); + break; + } + + err_val = (hsb << 16) + (msb << 8) + (lsb); + + return err_val; +} + +static int stv0900_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + + stv0900_write_bits(intp, I2CT_ON, enable); + + return 0; +} + +static void stv0900_set_ts_parallel_serial(struct stv0900_internal *intp, + enum fe_stv0900_clock_type path1_ts, + enum fe_stv0900_clock_type path2_ts) +{ + + dprintk("%s\n", __func__); + + if (intp->chip_id >= 0x20) { + switch (path1_ts) { + case STV0900_PARALLEL_PUNCT_CLOCK: + case STV0900_DVBCI_CLOCK: + switch (path2_ts) { + case STV0900_SERIAL_PUNCT_CLOCK: + case STV0900_SERIAL_CONT_CLOCK: + default: + stv0900_write_reg(intp, R0900_TSGENERAL, + 0x00); + break; + case STV0900_PARALLEL_PUNCT_CLOCK: + case STV0900_DVBCI_CLOCK: + stv0900_write_reg(intp, R0900_TSGENERAL, + 0x06); + stv0900_write_bits(intp, + F0900_P1_TSFIFO_MANSPEED, 3); + stv0900_write_bits(intp, + F0900_P2_TSFIFO_MANSPEED, 0); + stv0900_write_reg(intp, + R0900_P1_TSSPEED, 0x14); + stv0900_write_reg(intp, + R0900_P2_TSSPEED, 0x28); + break; + } + break; + case STV0900_SERIAL_PUNCT_CLOCK: + case STV0900_SERIAL_CONT_CLOCK: + default: + switch (path2_ts) { + case STV0900_SERIAL_PUNCT_CLOCK: + case STV0900_SERIAL_CONT_CLOCK: + default: + stv0900_write_reg(intp, + R0900_TSGENERAL, 0x0C); + break; + case STV0900_PARALLEL_PUNCT_CLOCK: + case STV0900_DVBCI_CLOCK: + stv0900_write_reg(intp, + R0900_TSGENERAL, 0x0A); + dprintk("%s: 0x0a\n", __func__); + break; + } + break; + } + } else { + switch (path1_ts) { + case STV0900_PARALLEL_PUNCT_CLOCK: + case STV0900_DVBCI_CLOCK: + switch (path2_ts) { + case STV0900_SERIAL_PUNCT_CLOCK: + case STV0900_SERIAL_CONT_CLOCK: + default: + stv0900_write_reg(intp, R0900_TSGENERAL1X, + 0x10); + break; + case STV0900_PARALLEL_PUNCT_CLOCK: + case STV0900_DVBCI_CLOCK: + stv0900_write_reg(intp, R0900_TSGENERAL1X, + 0x16); + stv0900_write_bits(intp, + F0900_P1_TSFIFO_MANSPEED, 3); + stv0900_write_bits(intp, + F0900_P2_TSFIFO_MANSPEED, 0); + stv0900_write_reg(intp, R0900_P1_TSSPEED, + 0x14); + stv0900_write_reg(intp, R0900_P2_TSSPEED, + 0x28); + break; + } + + break; + case STV0900_SERIAL_PUNCT_CLOCK: + case STV0900_SERIAL_CONT_CLOCK: + default: + switch (path2_ts) { + case STV0900_SERIAL_PUNCT_CLOCK: + case STV0900_SERIAL_CONT_CLOCK: + default: + stv0900_write_reg(intp, R0900_TSGENERAL1X, + 0x14); + break; + case STV0900_PARALLEL_PUNCT_CLOCK: + case STV0900_DVBCI_CLOCK: + stv0900_write_reg(intp, R0900_TSGENERAL1X, + 0x12); + dprintk("%s: 0x12\n", __func__); + break; + } + + break; + } + } + + switch (path1_ts) { + case STV0900_PARALLEL_PUNCT_CLOCK: + stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x00); + stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x00); + break; + case STV0900_DVBCI_CLOCK: + stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x00); + stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x01); + break; + case STV0900_SERIAL_PUNCT_CLOCK: + stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x01); + stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x00); + break; + case STV0900_SERIAL_CONT_CLOCK: + stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x01); + stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x01); + break; + default: + break; + } + + switch (path2_ts) { + case STV0900_PARALLEL_PUNCT_CLOCK: + stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x00); + stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x00); + break; + case STV0900_DVBCI_CLOCK: + stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x00); + stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x01); + break; + case STV0900_SERIAL_PUNCT_CLOCK: + stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x01); + stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x00); + break; + case STV0900_SERIAL_CONT_CLOCK: + stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x01); + stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x01); + break; + default: + break; + } + + stv0900_write_bits(intp, F0900_P2_RST_HWARE, 1); + stv0900_write_bits(intp, F0900_P2_RST_HWARE, 0); + stv0900_write_bits(intp, F0900_P1_RST_HWARE, 1); + stv0900_write_bits(intp, F0900_P1_RST_HWARE, 0); +} + +void stv0900_set_tuner(struct dvb_frontend *fe, u32 frequency, + u32 bandwidth) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + + frontend_ops = &fe->ops; + tuner_ops = &frontend_ops->tuner_ops; + + if (tuner_ops->set_frequency) { + if ((tuner_ops->set_frequency(fe, frequency)) < 0) + dprintk("%s: Invalid parameter\n", __func__); + else + dprintk("%s: Frequency=%d\n", __func__, frequency); + + } + + if (tuner_ops->set_bandwidth) { + if ((tuner_ops->set_bandwidth(fe, bandwidth)) < 0) + dprintk("%s: Invalid parameter\n", __func__); + else + dprintk("%s: Bandwidth=%d\n", __func__, bandwidth); + + } +} + +void stv0900_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + + frontend_ops = &fe->ops; + tuner_ops = &frontend_ops->tuner_ops; + + if (tuner_ops->set_bandwidth) { + if ((tuner_ops->set_bandwidth(fe, bandwidth)) < 0) + dprintk("%s: Invalid parameter\n", __func__); + else + dprintk("%s: Bandwidth=%d\n", __func__, bandwidth); + + } +} + +u32 stv0900_get_freq_auto(struct stv0900_internal *intp, int demod) +{ + u32 freq, round; + /* Formulat : + Tuner_Frequency(MHz) = Regs / 64 + Tuner_granularity(MHz) = Regs / 2048 + real_Tuner_Frequency = Tuner_Frequency(MHz) - Tuner_granularity(MHz) + */ + freq = (stv0900_get_bits(intp, TUN_RFFREQ2) << 10) + + (stv0900_get_bits(intp, TUN_RFFREQ1) << 2) + + stv0900_get_bits(intp, TUN_RFFREQ0); + + freq = (freq * 1000) / 64; + + round = (stv0900_get_bits(intp, TUN_RFRESTE1) >> 2) + + stv0900_get_bits(intp, TUN_RFRESTE0); + + round = (round * 1000) / 2048; + + return freq + round; +} + +void stv0900_set_tuner_auto(struct stv0900_internal *intp, u32 Frequency, + u32 Bandwidth, int demod) +{ + u32 tunerFrequency; + /* Formulat: + Tuner_frequency_reg= Frequency(MHz)*64 + */ + tunerFrequency = (Frequency * 64) / 1000; + + stv0900_write_bits(intp, TUN_RFFREQ2, (tunerFrequency >> 10)); + stv0900_write_bits(intp, TUN_RFFREQ1, (tunerFrequency >> 2) & 0xff); + stv0900_write_bits(intp, TUN_RFFREQ0, (tunerFrequency & 0x03)); + /* Low Pass Filter = BW /2 (MHz)*/ + stv0900_write_bits(intp, TUN_BW, Bandwidth / 2000000); + /* Tuner Write trig */ + stv0900_write_reg(intp, TNRLD, 1); +} + +static s32 stv0900_get_rf_level(struct stv0900_internal *intp, + const struct stv0900_table *lookup, + enum fe_stv0900_demod_num demod) +{ + s32 agc_gain = 0, + imin, + imax, + i, + rf_lvl = 0; + + dprintk("%s\n", __func__); + + if ((lookup == NULL) || (lookup->size <= 0)) + return 0; + + agc_gain = MAKEWORD(stv0900_get_bits(intp, AGCIQ_VALUE1), + stv0900_get_bits(intp, AGCIQ_VALUE0)); + + imin = 0; + imax = lookup->size - 1; + if (INRANGE(lookup->table[imin].regval, agc_gain, + lookup->table[imax].regval)) { + while ((imax - imin) > 1) { + i = (imax + imin) >> 1; + + if (INRANGE(lookup->table[imin].regval, + agc_gain, + lookup->table[i].regval)) + imax = i; + else + imin = i; + } + + rf_lvl = (s32)agc_gain - lookup->table[imin].regval; + rf_lvl *= (lookup->table[imax].realval - + lookup->table[imin].realval); + rf_lvl /= (lookup->table[imax].regval - + lookup->table[imin].regval); + rf_lvl += lookup->table[imin].realval; + } else if (agc_gain > lookup->table[0].regval) + rf_lvl = 5; + else if (agc_gain < lookup->table[lookup->size-1].regval) + rf_lvl = -100; + + dprintk("%s: RFLevel = %d\n", __func__, rf_lvl); + + return rf_lvl; +} + +static int stv0900_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *internal = state->internal; + s32 rflevel = stv0900_get_rf_level(internal, &stv0900_rf, + state->demod); + + rflevel = (rflevel + 100) * (65535 / 70); + if (rflevel < 0) + rflevel = 0; + + if (rflevel > 65535) + rflevel = 65535; + + *strength = rflevel; + + return 0; +} + +static s32 stv0900_carr_get_quality(struct dvb_frontend *fe, + const struct stv0900_table *lookup) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + + s32 c_n = -100, + regval, + imin, + imax, + i, + noise_field1, + noise_field0; + + dprintk("%s\n", __func__); + + if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) { + noise_field1 = NOSPLHT_NORMED1; + noise_field0 = NOSPLHT_NORMED0; + } else { + noise_field1 = NOSDATAT_NORMED1; + noise_field0 = NOSDATAT_NORMED0; + } + + if (stv0900_get_bits(intp, LOCK_DEFINITIF)) { + if ((lookup != NULL) && lookup->size) { + regval = 0; + msleep(5); + for (i = 0; i < 16; i++) { + regval += MAKEWORD(stv0900_get_bits(intp, + noise_field1), + stv0900_get_bits(intp, + noise_field0)); + msleep(1); + } + + regval /= 16; + imin = 0; + imax = lookup->size - 1; + if (INRANGE(lookup->table[imin].regval, + regval, + lookup->table[imax].regval)) { + while ((imax - imin) > 1) { + i = (imax + imin) >> 1; + if (INRANGE(lookup->table[imin].regval, + regval, + lookup->table[i].regval)) + imax = i; + else + imin = i; + } + + c_n = ((regval - lookup->table[imin].regval) + * (lookup->table[imax].realval + - lookup->table[imin].realval) + / (lookup->table[imax].regval + - lookup->table[imin].regval)) + + lookup->table[imin].realval; + } else if (regval < lookup->table[imin].regval) + c_n = 1000; + } + } + + return c_n; +} + +static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + u8 err_val1, err_val0; + u32 header_err_val = 0; + + *ucblocks = 0x0; + if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) { + /* DVB-S2 delineator errors count */ + + /* retreiving number for errnous headers */ + err_val1 = stv0900_read_reg(intp, BBFCRCKO1); + err_val0 = stv0900_read_reg(intp, BBFCRCKO0); + header_err_val = (err_val1 << 8) | err_val0; + + /* retreiving number for errnous packets */ + err_val1 = stv0900_read_reg(intp, UPCRCKO1); + err_val0 = stv0900_read_reg(intp, UPCRCKO0); + *ucblocks = (err_val1 << 8) | err_val0; + *ucblocks += header_err_val; + } + + return 0; +} + +static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + s32 snrlcl = stv0900_carr_get_quality(fe, + (const struct stv0900_table *)&stv0900_s2_cn); + snrlcl = (snrlcl + 30) * 384; + if (snrlcl < 0) + snrlcl = 0; + + if (snrlcl > 65535) + snrlcl = 65535; + + *snr = snrlcl; + + return 0; +} + +static u32 stv0900_get_ber(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + u32 ber = 10000000, i; + s32 demod_state; + + demod_state = stv0900_get_bits(intp, HEADER_MODE); + + switch (demod_state) { + case STV0900_SEARCH: + case STV0900_PLH_DETECTED: + default: + ber = 10000000; + break; + case STV0900_DVBS_FOUND: + ber = 0; + for (i = 0; i < 5; i++) { + msleep(5); + ber += stv0900_get_err_count(intp, 0, demod); + } + + ber /= 5; + if (stv0900_get_bits(intp, PRFVIT)) { + ber *= 9766; + ber = ber >> 13; + } + + break; + case STV0900_DVBS2_FOUND: + ber = 0; + for (i = 0; i < 5; i++) { + msleep(5); + ber += stv0900_get_err_count(intp, 0, demod); + } + + ber /= 5; + if (stv0900_get_bits(intp, PKTDELIN_LOCK)) { + ber *= 9766; + ber = ber >> 13; + } + + break; + } + + return ber; +} + +static int stv0900_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *internal = state->internal; + + *ber = stv0900_get_ber(internal, state->demod); + + return 0; +} + +int stv0900_get_demod_lock(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod, s32 time_out) +{ + s32 timer = 0, + lock = 0; + + enum fe_stv0900_search_state dmd_state; + + while ((timer < time_out) && (lock == 0)) { + dmd_state = stv0900_get_bits(intp, HEADER_MODE); + dprintk("Demod State = %d\n", dmd_state); + switch (dmd_state) { + case STV0900_SEARCH: + case STV0900_PLH_DETECTED: + default: + lock = 0; + break; + case STV0900_DVBS2_FOUND: + case STV0900_DVBS_FOUND: + lock = stv0900_get_bits(intp, LOCK_DEFINITIF); + break; + } + + if (lock == 0) + msleep(10); + + timer += 10; + } + + if (lock) + dprintk("DEMOD LOCK OK\n"); + else + dprintk("DEMOD LOCK FAIL\n"); + + return lock; +} + +void stv0900_stop_all_s2_modcod(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + s32 regflist, + i; + + dprintk("%s\n", __func__); + + regflist = MODCODLST0; + + for (i = 0; i < 16; i++) + stv0900_write_reg(intp, regflist + i, 0xff); +} + +void stv0900_activate_s2_modcod(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + u32 matype, + mod_code, + fmod, + reg_index, + field_index; + + dprintk("%s\n", __func__); + + if (intp->chip_id <= 0x11) { + msleep(5); + + mod_code = stv0900_read_reg(intp, PLHMODCOD); + matype = mod_code & 0x3; + mod_code = (mod_code & 0x7f) >> 2; + + reg_index = MODCODLSTF - mod_code / 2; + field_index = mod_code % 2; + + switch (matype) { + case 0: + default: + fmod = 14; + break; + case 1: + fmod = 13; + break; + case 2: + fmod = 11; + break; + case 3: + fmod = 7; + break; + } + + if ((INRANGE(STV0900_QPSK_12, mod_code, STV0900_8PSK_910)) + && (matype <= 1)) { + if (field_index == 0) + stv0900_write_reg(intp, reg_index, + 0xf0 | fmod); + else + stv0900_write_reg(intp, reg_index, + (fmod << 4) | 0xf); + } + + } else if (intp->chip_id >= 0x12) { + for (reg_index = 0; reg_index < 7; reg_index++) + stv0900_write_reg(intp, MODCODLST0 + reg_index, 0xff); + + stv0900_write_reg(intp, MODCODLSTE, 0xff); + stv0900_write_reg(intp, MODCODLSTF, 0xcf); + for (reg_index = 0; reg_index < 8; reg_index++) + stv0900_write_reg(intp, MODCODLST7 + reg_index, 0xcc); + + + } +} + +void stv0900_activate_s2_modcod_single(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + u32 reg_index; + + dprintk("%s\n", __func__); + + stv0900_write_reg(intp, MODCODLST0, 0xff); + stv0900_write_reg(intp, MODCODLST1, 0xf0); + stv0900_write_reg(intp, MODCODLSTF, 0x0f); + for (reg_index = 0; reg_index < 13; reg_index++) + stv0900_write_reg(intp, MODCODLST2 + reg_index, 0); + +} + +static enum dvbfe_algo stv0900_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + +void stv0900_start_search(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + u32 freq; + s16 freq_s16 ; + + stv0900_write_bits(intp, DEMOD_MODE, 0x1f); + if (intp->chip_id == 0x10) + stv0900_write_reg(intp, CORRELEXP, 0xaa); + + if (intp->chip_id < 0x20) + stv0900_write_reg(intp, CARHDR, 0x55); + + if (intp->chip_id <= 0x20) { + if (intp->symbol_rate[0] <= 5000000) { + stv0900_write_reg(intp, CARCFG, 0x44); + stv0900_write_reg(intp, CFRUP1, 0x0f); + stv0900_write_reg(intp, CFRUP0, 0xff); + stv0900_write_reg(intp, CFRLOW1, 0xf0); + stv0900_write_reg(intp, CFRLOW0, 0x00); + stv0900_write_reg(intp, RTCS2, 0x68); + } else { + stv0900_write_reg(intp, CARCFG, 0xc4); + stv0900_write_reg(intp, RTCS2, 0x44); + } + + } else { /*cut 3.0 above*/ + if (intp->symbol_rate[demod] <= 5000000) + stv0900_write_reg(intp, RTCS2, 0x68); + else + stv0900_write_reg(intp, RTCS2, 0x44); + + stv0900_write_reg(intp, CARCFG, 0x46); + if (intp->srch_algo[demod] == STV0900_WARM_START) { + freq = 1000 << 16; + freq /= (intp->mclk / 1000); + freq_s16 = (s16)freq; + } else { + freq = (intp->srch_range[demod] / 2000); + if (intp->symbol_rate[demod] <= 5000000) + freq += 80; + else + freq += 600; + + freq = freq << 16; + freq /= (intp->mclk / 1000); + freq_s16 = (s16)freq; + } + + stv0900_write_bits(intp, CFR_UP1, MSB(freq_s16)); + stv0900_write_bits(intp, CFR_UP0, LSB(freq_s16)); + freq_s16 *= (-1); + stv0900_write_bits(intp, CFR_LOW1, MSB(freq_s16)); + stv0900_write_bits(intp, CFR_LOW0, LSB(freq_s16)); + } + + stv0900_write_reg(intp, CFRINIT1, 0); + stv0900_write_reg(intp, CFRINIT0, 0); + + if (intp->chip_id >= 0x20) { + stv0900_write_reg(intp, EQUALCFG, 0x41); + stv0900_write_reg(intp, FFECFG, 0x41); + + if ((intp->srch_standard[demod] == STV0900_SEARCH_DVBS1) || + (intp->srch_standard[demod] == STV0900_SEARCH_DSS) || + (intp->srch_standard[demod] == STV0900_AUTO_SEARCH)) { + stv0900_write_reg(intp, VITSCALE, + 0x82); + stv0900_write_reg(intp, VAVSRVIT, 0x0); + } + } + + stv0900_write_reg(intp, SFRSTEP, 0x00); + stv0900_write_reg(intp, TMGTHRISE, 0xe0); + stv0900_write_reg(intp, TMGTHFALL, 0xc0); + stv0900_write_bits(intp, SCAN_ENABLE, 0); + stv0900_write_bits(intp, CFR_AUTOSCAN, 0); + stv0900_write_bits(intp, S1S2_SEQUENTIAL, 0); + stv0900_write_reg(intp, RTC, 0x88); + if (intp->chip_id >= 0x20) { + if (intp->symbol_rate[demod] < 2000000) { + if (intp->chip_id <= 0x20) + stv0900_write_reg(intp, CARFREQ, 0x39); + else /*cut 3.0*/ + stv0900_write_reg(intp, CARFREQ, 0x89); + + stv0900_write_reg(intp, CARHDR, 0x40); + } else if (intp->symbol_rate[demod] < 10000000) { + stv0900_write_reg(intp, CARFREQ, 0x4c); + stv0900_write_reg(intp, CARHDR, 0x20); + } else { + stv0900_write_reg(intp, CARFREQ, 0x4b); + stv0900_write_reg(intp, CARHDR, 0x20); + } + + } else { + if (intp->symbol_rate[demod] < 10000000) + stv0900_write_reg(intp, CARFREQ, 0xef); + else + stv0900_write_reg(intp, CARFREQ, 0xed); + } + + switch (intp->srch_algo[demod]) { + case STV0900_WARM_START: + stv0900_write_reg(intp, DMDISTATE, 0x1f); + stv0900_write_reg(intp, DMDISTATE, 0x18); + break; + case STV0900_COLD_START: + stv0900_write_reg(intp, DMDISTATE, 0x1f); + stv0900_write_reg(intp, DMDISTATE, 0x15); + break; + default: + break; + } +} + +u8 stv0900_get_optim_carr_loop(s32 srate, enum fe_stv0900_modcode modcode, + s32 pilot, u8 chip_id) +{ + u8 aclc_value = 0x29; + s32 i; + const struct stv0900_car_loop_optim *cls2, *cllqs2, *cllas2; + + dprintk("%s\n", __func__); + + if (chip_id <= 0x12) { + cls2 = FE_STV0900_S2CarLoop; + cllqs2 = FE_STV0900_S2LowQPCarLoopCut30; + cllas2 = FE_STV0900_S2APSKCarLoopCut30; + } else if (chip_id == 0x20) { + cls2 = FE_STV0900_S2CarLoopCut20; + cllqs2 = FE_STV0900_S2LowQPCarLoopCut20; + cllas2 = FE_STV0900_S2APSKCarLoopCut20; + } else { + cls2 = FE_STV0900_S2CarLoopCut30; + cllqs2 = FE_STV0900_S2LowQPCarLoopCut30; + cllas2 = FE_STV0900_S2APSKCarLoopCut30; + } + + if (modcode < STV0900_QPSK_12) { + i = 0; + while ((i < 3) && (modcode != cllqs2[i].modcode)) + i++; + + if (i >= 3) + i = 2; + } else { + i = 0; + while ((i < 14) && (modcode != cls2[i].modcode)) + i++; + + if (i >= 14) { + i = 0; + while ((i < 11) && (modcode != cllas2[i].modcode)) + i++; + + if (i >= 11) + i = 10; + } + } + + if (modcode <= STV0900_QPSK_25) { + if (pilot) { + if (srate <= 3000000) + aclc_value = cllqs2[i].car_loop_pilots_on_2; + else if (srate <= 7000000) + aclc_value = cllqs2[i].car_loop_pilots_on_5; + else if (srate <= 15000000) + aclc_value = cllqs2[i].car_loop_pilots_on_10; + else if (srate <= 25000000) + aclc_value = cllqs2[i].car_loop_pilots_on_20; + else + aclc_value = cllqs2[i].car_loop_pilots_on_30; + } else { + if (srate <= 3000000) + aclc_value = cllqs2[i].car_loop_pilots_off_2; + else if (srate <= 7000000) + aclc_value = cllqs2[i].car_loop_pilots_off_5; + else if (srate <= 15000000) + aclc_value = cllqs2[i].car_loop_pilots_off_10; + else if (srate <= 25000000) + aclc_value = cllqs2[i].car_loop_pilots_off_20; + else + aclc_value = cllqs2[i].car_loop_pilots_off_30; + } + + } else if (modcode <= STV0900_8PSK_910) { + if (pilot) { + if (srate <= 3000000) + aclc_value = cls2[i].car_loop_pilots_on_2; + else if (srate <= 7000000) + aclc_value = cls2[i].car_loop_pilots_on_5; + else if (srate <= 15000000) + aclc_value = cls2[i].car_loop_pilots_on_10; + else if (srate <= 25000000) + aclc_value = cls2[i].car_loop_pilots_on_20; + else + aclc_value = cls2[i].car_loop_pilots_on_30; + } else { + if (srate <= 3000000) + aclc_value = cls2[i].car_loop_pilots_off_2; + else if (srate <= 7000000) + aclc_value = cls2[i].car_loop_pilots_off_5; + else if (srate <= 15000000) + aclc_value = cls2[i].car_loop_pilots_off_10; + else if (srate <= 25000000) + aclc_value = cls2[i].car_loop_pilots_off_20; + else + aclc_value = cls2[i].car_loop_pilots_off_30; + } + + } else { + if (srate <= 3000000) + aclc_value = cllas2[i].car_loop_pilots_on_2; + else if (srate <= 7000000) + aclc_value = cllas2[i].car_loop_pilots_on_5; + else if (srate <= 15000000) + aclc_value = cllas2[i].car_loop_pilots_on_10; + else if (srate <= 25000000) + aclc_value = cllas2[i].car_loop_pilots_on_20; + else + aclc_value = cllas2[i].car_loop_pilots_on_30; + } + + return aclc_value; +} + +u8 stv0900_get_optim_short_carr_loop(s32 srate, + enum fe_stv0900_modulation modulation, + u8 chip_id) +{ + const struct stv0900_short_frames_car_loop_optim *s2scl; + const struct stv0900_short_frames_car_loop_optim_vs_mod *s2sclc30; + s32 mod_index = 0; + u8 aclc_value = 0x0b; + + dprintk("%s\n", __func__); + + s2scl = FE_STV0900_S2ShortCarLoop; + s2sclc30 = FE_STV0900_S2ShortCarLoopCut30; + + switch (modulation) { + case STV0900_QPSK: + default: + mod_index = 0; + break; + case STV0900_8PSK: + mod_index = 1; + break; + case STV0900_16APSK: + mod_index = 2; + break; + case STV0900_32APSK: + mod_index = 3; + break; + } + + if (chip_id >= 0x30) { + if (srate <= 3000000) + aclc_value = s2sclc30[mod_index].car_loop_2; + else if (srate <= 7000000) + aclc_value = s2sclc30[mod_index].car_loop_5; + else if (srate <= 15000000) + aclc_value = s2sclc30[mod_index].car_loop_10; + else if (srate <= 25000000) + aclc_value = s2sclc30[mod_index].car_loop_20; + else + aclc_value = s2sclc30[mod_index].car_loop_30; + + } else if (chip_id >= 0x20) { + if (srate <= 3000000) + aclc_value = s2scl[mod_index].car_loop_cut20_2; + else if (srate <= 7000000) + aclc_value = s2scl[mod_index].car_loop_cut20_5; + else if (srate <= 15000000) + aclc_value = s2scl[mod_index].car_loop_cut20_10; + else if (srate <= 25000000) + aclc_value = s2scl[mod_index].car_loop_cut20_20; + else + aclc_value = s2scl[mod_index].car_loop_cut20_30; + + } else { + if (srate <= 3000000) + aclc_value = s2scl[mod_index].car_loop_cut12_2; + else if (srate <= 7000000) + aclc_value = s2scl[mod_index].car_loop_cut12_5; + else if (srate <= 15000000) + aclc_value = s2scl[mod_index].car_loop_cut12_10; + else if (srate <= 25000000) + aclc_value = s2scl[mod_index].car_loop_cut12_20; + else + aclc_value = s2scl[mod_index].car_loop_cut12_30; + + } + + return aclc_value; +} + +static +enum fe_stv0900_error stv0900_st_dvbs2_single(struct stv0900_internal *intp, + enum fe_stv0900_demod_mode LDPC_Mode, + enum fe_stv0900_demod_num demod) +{ + enum fe_stv0900_error error = STV0900_NO_ERROR; + s32 reg_ind; + + dprintk("%s\n", __func__); + + switch (LDPC_Mode) { + case STV0900_DUAL: + default: + if ((intp->demod_mode != STV0900_DUAL) + || (stv0900_get_bits(intp, F0900_DDEMOD) != 1)) { + stv0900_write_reg(intp, R0900_GENCFG, 0x1d); + + intp->demod_mode = STV0900_DUAL; + + stv0900_write_bits(intp, F0900_FRESFEC, 1); + stv0900_write_bits(intp, F0900_FRESFEC, 0); + + for (reg_ind = 0; reg_ind < 7; reg_ind++) + stv0900_write_reg(intp, + R0900_P1_MODCODLST0 + reg_ind, + 0xff); + for (reg_ind = 0; reg_ind < 8; reg_ind++) + stv0900_write_reg(intp, + R0900_P1_MODCODLST7 + reg_ind, + 0xcc); + + stv0900_write_reg(intp, R0900_P1_MODCODLSTE, 0xff); + stv0900_write_reg(intp, R0900_P1_MODCODLSTF, 0xcf); + + for (reg_ind = 0; reg_ind < 7; reg_ind++) + stv0900_write_reg(intp, + R0900_P2_MODCODLST0 + reg_ind, + 0xff); + for (reg_ind = 0; reg_ind < 8; reg_ind++) + stv0900_write_reg(intp, + R0900_P2_MODCODLST7 + reg_ind, + 0xcc); + + stv0900_write_reg(intp, R0900_P2_MODCODLSTE, 0xff); + stv0900_write_reg(intp, R0900_P2_MODCODLSTF, 0xcf); + } + + break; + case STV0900_SINGLE: + if (demod == STV0900_DEMOD_2) { + stv0900_stop_all_s2_modcod(intp, STV0900_DEMOD_1); + stv0900_activate_s2_modcod_single(intp, + STV0900_DEMOD_2); + stv0900_write_reg(intp, R0900_GENCFG, 0x06); + } else { + stv0900_stop_all_s2_modcod(intp, STV0900_DEMOD_2); + stv0900_activate_s2_modcod_single(intp, + STV0900_DEMOD_1); + stv0900_write_reg(intp, R0900_GENCFG, 0x04); + } + + intp->demod_mode = STV0900_SINGLE; + + stv0900_write_bits(intp, F0900_FRESFEC, 1); + stv0900_write_bits(intp, F0900_FRESFEC, 0); + stv0900_write_bits(intp, F0900_P1_ALGOSWRST, 1); + stv0900_write_bits(intp, F0900_P1_ALGOSWRST, 0); + stv0900_write_bits(intp, F0900_P2_ALGOSWRST, 1); + stv0900_write_bits(intp, F0900_P2_ALGOSWRST, 0); + break; + } + + return error; +} + +static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe, + struct stv0900_init_params *p_init) +{ + struct stv0900_state *state = fe->demodulator_priv; + enum fe_stv0900_error error = STV0900_NO_ERROR; + enum fe_stv0900_error demodError = STV0900_NO_ERROR; + struct stv0900_internal *intp = NULL; + int selosci, i; + + struct stv0900_inode *temp_int = find_inode(state->i2c_adap, + state->config->demod_address); + + dprintk("%s\n", __func__); + + if ((temp_int != NULL) && (p_init->demod_mode == STV0900_DUAL)) { + state->internal = temp_int->internal; + (state->internal->dmds_used)++; + dprintk("%s: Find Internal Structure!\n", __func__); + return STV0900_NO_ERROR; + } else { + state->internal = kmalloc(sizeof(struct stv0900_internal), + GFP_KERNEL); + if (state->internal == NULL) + return STV0900_INVALID_HANDLE; + temp_int = append_internal(state->internal); + if (temp_int == NULL) { + kfree(state->internal); + state->internal = NULL; + return STV0900_INVALID_HANDLE; + } + state->internal->dmds_used = 1; + state->internal->i2c_adap = state->i2c_adap; + state->internal->i2c_addr = state->config->demod_address; + state->internal->clkmode = state->config->clkmode; + state->internal->errs = STV0900_NO_ERROR; + dprintk("%s: Create New Internal Structure!\n", __func__); + } + + if (state->internal == NULL) { + error = STV0900_INVALID_HANDLE; + return error; + } + + demodError = stv0900_initialize(state->internal); + if (demodError == STV0900_NO_ERROR) { + error = STV0900_NO_ERROR; + } else { + if (demodError == STV0900_INVALID_HANDLE) + error = STV0900_INVALID_HANDLE; + else + error = STV0900_I2C_ERROR; + + return error; + } + + intp = state->internal; + + intp->demod_mode = p_init->demod_mode; + stv0900_st_dvbs2_single(intp, intp->demod_mode, STV0900_DEMOD_1); + intp->chip_id = stv0900_read_reg(intp, R0900_MID); + intp->rolloff = p_init->rolloff; + intp->quartz = p_init->dmd_ref_clk; + + stv0900_write_bits(intp, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff); + stv0900_write_bits(intp, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff); + + intp->ts_config = p_init->ts_config; + if (intp->ts_config == NULL) + stv0900_set_ts_parallel_serial(intp, + p_init->path1_ts_clock, + p_init->path2_ts_clock); + else { + for (i = 0; intp->ts_config[i].addr != 0xffff; i++) + stv0900_write_reg(intp, + intp->ts_config[i].addr, + intp->ts_config[i].val); + + stv0900_write_bits(intp, F0900_P2_RST_HWARE, 1); + stv0900_write_bits(intp, F0900_P2_RST_HWARE, 0); + stv0900_write_bits(intp, F0900_P1_RST_HWARE, 1); + stv0900_write_bits(intp, F0900_P1_RST_HWARE, 0); + } + + intp->tuner_type[0] = p_init->tuner1_type; + intp->tuner_type[1] = p_init->tuner2_type; + /* tuner init */ + switch (p_init->tuner1_type) { + case 3: /*FE_AUTO_STB6100:*/ + stv0900_write_reg(intp, R0900_P1_TNRCFG, 0x3c); + stv0900_write_reg(intp, R0900_P1_TNRCFG2, 0x86); + stv0900_write_reg(intp, R0900_P1_TNRCFG3, 0x18); + stv0900_write_reg(intp, R0900_P1_TNRXTAL, 27); /* 27MHz */ + stv0900_write_reg(intp, R0900_P1_TNRSTEPS, 0x05); + stv0900_write_reg(intp, R0900_P1_TNRGAIN, 0x17); + stv0900_write_reg(intp, R0900_P1_TNRADJ, 0x1f); + stv0900_write_reg(intp, R0900_P1_TNRCTL2, 0x0); + stv0900_write_bits(intp, F0900_P1_TUN_TYPE, 3); + break; + /* case FE_SW_TUNER: */ + default: + stv0900_write_bits(intp, F0900_P1_TUN_TYPE, 6); + break; + } + + stv0900_write_bits(intp, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress); + switch (p_init->tuner1_adc) { + case 1: + stv0900_write_reg(intp, R0900_TSTTNR1, 0x26); + break; + default: + break; + } + + stv0900_write_reg(intp, R0900_P1_TNRLD, 1); /* hw tuner */ + + /* tuner init */ + switch (p_init->tuner2_type) { + case 3: /*FE_AUTO_STB6100:*/ + stv0900_write_reg(intp, R0900_P2_TNRCFG, 0x3c); + stv0900_write_reg(intp, R0900_P2_TNRCFG2, 0x86); + stv0900_write_reg(intp, R0900_P2_TNRCFG3, 0x18); + stv0900_write_reg(intp, R0900_P2_TNRXTAL, 27); /* 27MHz */ + stv0900_write_reg(intp, R0900_P2_TNRSTEPS, 0x05); + stv0900_write_reg(intp, R0900_P2_TNRGAIN, 0x17); + stv0900_write_reg(intp, R0900_P2_TNRADJ, 0x1f); + stv0900_write_reg(intp, R0900_P2_TNRCTL2, 0x0); + stv0900_write_bits(intp, F0900_P2_TUN_TYPE, 3); + break; + /* case FE_SW_TUNER: */ + default: + stv0900_write_bits(intp, F0900_P2_TUN_TYPE, 6); + break; + } + + stv0900_write_bits(intp, F0900_P2_TUN_MADDRESS, p_init->tun2_maddress); + switch (p_init->tuner2_adc) { + case 1: + stv0900_write_reg(intp, R0900_TSTTNR3, 0x26); + break; + default: + break; + } + + stv0900_write_reg(intp, R0900_P2_TNRLD, 1); /* hw tuner */ + + stv0900_write_bits(intp, F0900_P1_TUN_IQSWAP, p_init->tun1_iq_inv); + stv0900_write_bits(intp, F0900_P2_TUN_IQSWAP, p_init->tun2_iq_inv); + stv0900_set_mclk(intp, 135000000); + msleep(3); + + switch (intp->clkmode) { + case 0: + case 2: + stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | intp->clkmode); + break; + default: + selosci = 0x02 & stv0900_read_reg(intp, R0900_SYNTCTRL); + stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | selosci); + break; + } + msleep(3); + + intp->mclk = stv0900_get_mclk_freq(intp, intp->quartz); + if (intp->errs) + error = STV0900_I2C_ERROR; + + return error; +} + +static int stv0900_status(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + enum fe_stv0900_search_state demod_state; + int locked = FALSE; + u8 tsbitrate0_val, tsbitrate1_val; + s32 bitrate; + + demod_state = stv0900_get_bits(intp, HEADER_MODE); + switch (demod_state) { + case STV0900_SEARCH: + case STV0900_PLH_DETECTED: + default: + locked = FALSE; + break; + case STV0900_DVBS2_FOUND: + locked = stv0900_get_bits(intp, LOCK_DEFINITIF) && + stv0900_get_bits(intp, PKTDELIN_LOCK) && + stv0900_get_bits(intp, TSFIFO_LINEOK); + break; + case STV0900_DVBS_FOUND: + locked = stv0900_get_bits(intp, LOCK_DEFINITIF) && + stv0900_get_bits(intp, LOCKEDVIT) && + stv0900_get_bits(intp, TSFIFO_LINEOK); + break; + } + + dprintk("%s: locked = %d\n", __func__, locked); + + if (stvdebug) { + /* Print TS bitrate */ + tsbitrate0_val = stv0900_read_reg(intp, TSBITRATE0); + tsbitrate1_val = stv0900_read_reg(intp, TSBITRATE1); + /* Formula Bit rate = Mclk * px_tsfifo_bitrate / 16384 */ + bitrate = (stv0900_get_mclk_freq(intp, intp->quartz)/1000000) + * (tsbitrate1_val << 8 | tsbitrate0_val); + bitrate /= 16384; + dprintk("TS bitrate = %d Mbit/sec\n", bitrate); + } + + return locked; +} + +static int stv0900_set_mis(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod, int mis) +{ + enum fe_stv0900_error error = STV0900_NO_ERROR; + + dprintk("%s\n", __func__); + + if (mis < 0 || mis > 255) { + dprintk("Disable MIS filtering\n"); + stv0900_write_bits(intp, FILTER_EN, 0); + } else { + dprintk("Enable MIS filtering - %d\n", mis); + stv0900_write_bits(intp, FILTER_EN, 1); + stv0900_write_reg(intp, ISIENTRY, mis); + stv0900_write_reg(intp, ISIBITENA, 0xff); + } + + return error; +} + + +static enum dvbfe_search stv0900_search(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + struct stv0900_search_params p_search; + struct stv0900_signal_info p_result = intp->result[demod]; + + enum fe_stv0900_error error = STV0900_NO_ERROR; + + dprintk("%s: ", __func__); + + if (!(INRANGE(100000, c->symbol_rate, 70000000))) + return DVBFE_ALGO_SEARCH_FAILED; + + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + stv0900_set_mis(intp, demod, c->stream_id); + + p_result.locked = FALSE; + p_search.path = demod; + p_search.frequency = c->frequency; + p_search.symbol_rate = c->symbol_rate; + p_search.search_range = 10000000; + p_search.fec = STV0900_FEC_UNKNOWN; + p_search.standard = STV0900_AUTO_SEARCH; + p_search.iq_inversion = STV0900_IQ_AUTO; + p_search.search_algo = STV0900_BLIND_SEARCH; + /* Speeds up DVB-S searching */ + if (c->delivery_system == SYS_DVBS) + p_search.standard = STV0900_SEARCH_DVBS1; + + intp->srch_standard[demod] = p_search.standard; + intp->symbol_rate[demod] = p_search.symbol_rate; + intp->srch_range[demod] = p_search.search_range; + intp->freq[demod] = p_search.frequency; + intp->srch_algo[demod] = p_search.search_algo; + intp->srch_iq_inv[demod] = p_search.iq_inversion; + intp->fec[demod] = p_search.fec; + if ((stv0900_algo(fe) == STV0900_RANGEOK) && + (intp->errs == STV0900_NO_ERROR)) { + p_result.locked = intp->result[demod].locked; + p_result.standard = intp->result[demod].standard; + p_result.frequency = intp->result[demod].frequency; + p_result.symbol_rate = intp->result[demod].symbol_rate; + p_result.fec = intp->result[demod].fec; + p_result.modcode = intp->result[demod].modcode; + p_result.pilot = intp->result[demod].pilot; + p_result.frame_len = intp->result[demod].frame_len; + p_result.spectrum = intp->result[demod].spectrum; + p_result.rolloff = intp->result[demod].rolloff; + p_result.modulation = intp->result[demod].modulation; + } else { + p_result.locked = FALSE; + switch (intp->err[demod]) { + case STV0900_I2C_ERROR: + error = STV0900_I2C_ERROR; + break; + case STV0900_NO_ERROR: + default: + error = STV0900_SEARCH_FAILED; + break; + } + } + + if ((p_result.locked == TRUE) && (error == STV0900_NO_ERROR)) { + dprintk("Search Success\n"); + return DVBFE_ALGO_SEARCH_SUCCESS; + } else { + dprintk("Search Fail\n"); + return DVBFE_ALGO_SEARCH_FAILED; + } + +} + +static int stv0900_read_status(struct dvb_frontend *fe, enum fe_status *status) +{ + struct stv0900_state *state = fe->demodulator_priv; + + dprintk("%s: ", __func__); + + if ((stv0900_status(state->internal, state->demod)) == TRUE) { + dprintk("DEMOD LOCK OK\n"); + *status = FE_HAS_CARRIER + | FE_HAS_VITERBI + | FE_HAS_SYNC + | FE_HAS_LOCK; + if (state->config->set_lock_led) + state->config->set_lock_led(fe, 1); + } else { + *status = 0; + if (state->config->set_lock_led) + state->config->set_lock_led(fe, 0); + dprintk("DEMOD LOCK FAIL\n"); + } + + return 0; +} + +static int stv0900_stop_ts(struct dvb_frontend *fe, int stop_ts) +{ + + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + + if (stop_ts == TRUE) + stv0900_write_bits(intp, RST_HWARE, 1); + else + stv0900_write_bits(intp, RST_HWARE, 0); + + return 0; +} + +static int stv0900_diseqc_init(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + + stv0900_write_bits(intp, DISTX_MODE, state->config->diseqc_mode); + stv0900_write_bits(intp, DISEQC_RESET, 1); + stv0900_write_bits(intp, DISEQC_RESET, 0); + + return 0; +} + +static int stv0900_init(struct dvb_frontend *fe) +{ + dprintk("%s\n", __func__); + + stv0900_stop_ts(fe, 1); + stv0900_diseqc_init(fe); + + return 0; +} + +static int stv0900_diseqc_send(struct stv0900_internal *intp , u8 *data, + u32 NbData, enum fe_stv0900_demod_num demod) +{ + s32 i = 0; + + stv0900_write_bits(intp, DIS_PRECHARGE, 1); + while (i < NbData) { + while (stv0900_get_bits(intp, FIFO_FULL)) + ;/* checkpatch complains */ + stv0900_write_reg(intp, DISTXDATA, data[i]); + i++; + } + + stv0900_write_bits(intp, DIS_PRECHARGE, 0); + i = 0; + while ((stv0900_get_bits(intp, TX_IDLE) != 1) && (i < 10)) { + msleep(10); + i++; + } + + return 0; +} + +static int stv0900_send_master_cmd(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) +{ + struct stv0900_state *state = fe->demodulator_priv; + + return stv0900_diseqc_send(state->internal, + cmd->msg, + cmd->msg_len, + state->demod); +} + +static int stv0900_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + u8 data; + + + switch (burst) { + case SEC_MINI_A: + stv0900_write_bits(intp, DISTX_MODE, 3);/* Unmodulated */ + data = 0x00; + stv0900_diseqc_send(intp, &data, 1, state->demod); + break; + case SEC_MINI_B: + stv0900_write_bits(intp, DISTX_MODE, 2);/* Modulated */ + data = 0xff; + stv0900_diseqc_send(intp, &data, 1, state->demod); + break; + } + + return 0; +} + +static int stv0900_recv_slave_reply(struct dvb_frontend *fe, + struct dvb_diseqc_slave_reply *reply) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + s32 i = 0; + + reply->msg_len = 0; + + while ((stv0900_get_bits(intp, RX_END) != 1) && (i < 10)) { + msleep(10); + i++; + } + + if (stv0900_get_bits(intp, RX_END)) { + reply->msg_len = stv0900_get_bits(intp, FIFO_BYTENBR); + + for (i = 0; i < reply->msg_len; i++) + reply->msg[i] = stv0900_read_reg(intp, DISRXDATA); + } + + return 0; +} + +static int stv0900_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t toneoff) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + + dprintk("%s: %s\n", __func__, ((toneoff == 0) ? "On" : "Off")); + + switch (toneoff) { + case SEC_TONE_ON: + /*Set the DiseqC mode to 22Khz _continues_ tone*/ + stv0900_write_bits(intp, DISTX_MODE, 0); + stv0900_write_bits(intp, DISEQC_RESET, 1); + /*release DiseqC reset to enable the 22KHz tone*/ + stv0900_write_bits(intp, DISEQC_RESET, 0); + break; + case SEC_TONE_OFF: + /*return diseqc mode to config->diseqc_mode. + Usually it's without _continues_ tone */ + stv0900_write_bits(intp, DISTX_MODE, + state->config->diseqc_mode); + /*maintain the DiseqC reset to disable the 22KHz tone*/ + stv0900_write_bits(intp, DISEQC_RESET, 1); + stv0900_write_bits(intp, DISEQC_RESET, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static void stv0900_release(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (state->config->set_lock_led) + state->config->set_lock_led(fe, 0); + + if ((--(state->internal->dmds_used)) <= 0) { + + dprintk("%s: Actually removing\n", __func__); + + remove_inode(state->internal); + kfree(state->internal); + } + + kfree(state); +} + +static int stv0900_sleep(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (state->config->set_lock_led) + state->config->set_lock_led(fe, 0); + + return 0; +} + +static int stv0900_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + struct stv0900_signal_info p_result = intp->result[demod]; + + p->frequency = p_result.locked ? p_result.frequency : 0; + p->symbol_rate = p_result.locked ? p_result.symbol_rate : 0; + return 0; +} + +static struct dvb_frontend_ops stv0900_ops = { + .delsys = { SYS_DVBS, SYS_DVBS2, SYS_DSS }, + .info = { + .name = "STV0900 frontend", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | FE_CAN_QPSK | + FE_CAN_2G_MODULATION | + FE_CAN_FEC_AUTO + }, + .release = stv0900_release, + .init = stv0900_init, + .get_frontend = stv0900_get_frontend, + .sleep = stv0900_sleep, + .get_frontend_algo = stv0900_frontend_algo, + .i2c_gate_ctrl = stv0900_i2c_gate_ctrl, + .diseqc_send_master_cmd = stv0900_send_master_cmd, + .diseqc_send_burst = stv0900_send_burst, + .diseqc_recv_slave_reply = stv0900_recv_slave_reply, + .set_tone = stv0900_set_tone, + .search = stv0900_search, + .read_status = stv0900_read_status, + .read_ber = stv0900_read_ber, + .read_signal_strength = stv0900_read_signal_strength, + .read_snr = stv0900_read_snr, + .read_ucblocks = stv0900_read_ucblocks, +}; + +struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, + struct i2c_adapter *i2c, + int demod) +{ + struct stv0900_state *state = NULL; + struct stv0900_init_params init_params; + enum fe_stv0900_error err_stv0900; + + state = kzalloc(sizeof(struct stv0900_state), GFP_KERNEL); + if (state == NULL) + goto error; + + state->demod = demod; + state->config = config; + state->i2c_adap = i2c; + + memcpy(&state->frontend.ops, &stv0900_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + switch (demod) { + case 0: + case 1: + init_params.dmd_ref_clk = config->xtal; + init_params.demod_mode = config->demod_mode; + init_params.rolloff = STV0900_35; + init_params.path1_ts_clock = config->path1_mode; + init_params.tun1_maddress = config->tun1_maddress; + init_params.tun1_iq_inv = STV0900_IQ_NORMAL; + init_params.tuner1_adc = config->tun1_adc; + init_params.tuner1_type = config->tun1_type; + init_params.path2_ts_clock = config->path2_mode; + init_params.ts_config = config->ts_config_regs; + init_params.tun2_maddress = config->tun2_maddress; + init_params.tuner2_adc = config->tun2_adc; + init_params.tuner2_type = config->tun2_type; + init_params.tun2_iq_inv = STV0900_IQ_SWAPPED; + + err_stv0900 = stv0900_init_internal(&state->frontend, + &init_params); + + if (err_stv0900) + goto error; + + if (state->internal->chip_id >= 0x30) + state->frontend.ops.info.caps |= FE_CAN_MULTISTREAM; + + break; + default: + goto error; + break; + } + + dprintk("%s: Attaching STV0900 demodulator(%d) \n", __func__, demod); + return &state->frontend; + +error: + dprintk("%s: Failed to attach STV0900 demodulator(%d) \n", + __func__, demod); + kfree(state); + return NULL; +} +EXPORT_SYMBOL(stv0900_attach); + +MODULE_PARM_DESC(debug, "Set debug"); + +MODULE_AUTHOR("Igor M. Liplianin"); +MODULE_DESCRIPTION("ST STV0900 frontend"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/stv0900_init.h b/drivers/media/dvb-frontends/stv0900_init.h new file mode 100644 index 00000000..b684df99 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0900_init.h @@ -0,0 +1,584 @@ +/* + * stv0900_init.h + * + * Driver for ST STV0900 satellite demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef STV0900_INIT_H +#define STV0900_INIT_H + +#include "stv0900_priv.h" + +/* DVBS2 C/N Look-Up table */ +static const struct stv0900_table stv0900_s2_cn = { + 55, + { + { -30, 13348 }, /*C/N=-3dB*/ + { -20, 12640 }, /*C/N=-2dB*/ + { -10, 11883 }, /*C/N=-1dB*/ + { 0, 11101 }, /*C/N=-0dB*/ + { 5, 10718 }, /*C/N=0.5dB*/ + { 10, 10339 }, /*C/N=1.0dB*/ + { 15, 9947 }, /*C/N=1.5dB*/ + { 20, 9552 }, /*C/N=2.0dB*/ + { 25, 9183 }, /*C/N=2.5dB*/ + { 30, 8799 }, /*C/N=3.0dB*/ + { 35, 8422 }, /*C/N=3.5dB*/ + { 40, 8062 }, /*C/N=4.0dB*/ + { 45, 7707 }, /*C/N=4.5dB*/ + { 50, 7353 }, /*C/N=5.0dB*/ + { 55, 7025 }, /*C/N=5.5dB*/ + { 60, 6684 }, /*C/N=6.0dB*/ + { 65, 6331 }, /*C/N=6.5dB*/ + { 70, 6036 }, /*C/N=7.0dB*/ + { 75, 5727 }, /*C/N=7.5dB*/ + { 80, 5437 }, /*C/N=8.0dB*/ + { 85, 5164 }, /*C/N=8.5dB*/ + { 90, 4902 }, /*C/N=9.0dB*/ + { 95, 4653 }, /*C/N=9.5dB*/ + { 100, 4408 }, /*C/N=10.0dB*/ + { 105, 4187 }, /*C/N=10.5dB*/ + { 110, 3961 }, /*C/N=11.0dB*/ + { 115, 3751 }, /*C/N=11.5dB*/ + { 120, 3558 }, /*C/N=12.0dB*/ + { 125, 3368 }, /*C/N=12.5dB*/ + { 130, 3191 }, /*C/N=13.0dB*/ + { 135, 3017 }, /*C/N=13.5dB*/ + { 140, 2862 }, /*C/N=14.0dB*/ + { 145, 2710 }, /*C/N=14.5dB*/ + { 150, 2565 }, /*C/N=15.0dB*/ + { 160, 2300 }, /*C/N=16.0dB*/ + { 170, 2058 }, /*C/N=17.0dB*/ + { 180, 1849 }, /*C/N=18.0dB*/ + { 190, 1663 }, /*C/N=19.0dB*/ + { 200, 1495 }, /*C/N=20.0dB*/ + { 210, 1349 }, /*C/N=21.0dB*/ + { 220, 1222 }, /*C/N=22.0dB*/ + { 230, 1110 }, /*C/N=23.0dB*/ + { 240, 1011 }, /*C/N=24.0dB*/ + { 250, 925 }, /*C/N=25.0dB*/ + { 260, 853 }, /*C/N=26.0dB*/ + { 270, 789 }, /*C/N=27.0dB*/ + { 280, 734 }, /*C/N=28.0dB*/ + { 290, 690 }, /*C/N=29.0dB*/ + { 300, 650 }, /*C/N=30.0dB*/ + { 310, 619 }, /*C/N=31.0dB*/ + { 320, 593 }, /*C/N=32.0dB*/ + { 330, 571 }, /*C/N=33.0dB*/ + { 400, 498 }, /*C/N=40.0dB*/ + { 450, 484 }, /*C/N=45.0dB*/ + { 500, 481 } /*C/N=50.0dB*/ + } +}; + +/* RF level C/N Look-Up table */ +static const struct stv0900_table stv0900_rf = { + 14, + { + { -5, 0xCAA1 }, /*-5dBm*/ + { -10, 0xC229 }, /*-10dBm*/ + { -15, 0xBB08 }, /*-15dBm*/ + { -20, 0xB4BC }, /*-20dBm*/ + { -25, 0xAD5A }, /*-25dBm*/ + { -30, 0xA298 }, /*-30dBm*/ + { -35, 0x98A8 }, /*-35dBm*/ + { -40, 0x8389 }, /*-40dBm*/ + { -45, 0x59BE }, /*-45dBm*/ + { -50, 0x3A14 }, /*-50dBm*/ + { -55, 0x2D11 }, /*-55dBm*/ + { -60, 0x210D }, /*-60dBm*/ + { -65, 0xA14F }, /*-65dBm*/ + { -70, 0x7AA } /*-70dBm*/ + } +}; + +struct stv0900_car_loop_optim { + enum fe_stv0900_modcode modcode; + u8 car_loop_pilots_on_2; + u8 car_loop_pilots_off_2; + u8 car_loop_pilots_on_5; + u8 car_loop_pilots_off_5; + u8 car_loop_pilots_on_10; + u8 car_loop_pilots_off_10; + u8 car_loop_pilots_on_20; + u8 car_loop_pilots_off_20; + u8 car_loop_pilots_on_30; + u8 car_loop_pilots_off_30; + +}; + +struct stv0900_short_frames_car_loop_optim { + enum fe_stv0900_modulation modulation; + u8 car_loop_cut12_2; /* Cut 1.2, SR<=3msps */ + u8 car_loop_cut20_2; /* Cut 2.0, SR<3msps */ + u8 car_loop_cut12_5; /* Cut 1.2, 3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef STV0900_PRIV_H +#define STV0900_PRIV_H + +#include + +#define ABS(X) ((X) < 0 ? (-1 * (X)) : (X)) +#define INRANGE(X, Y, Z) ((((X) <= (Y)) && ((Y) <= (Z))) \ + || (((Z) <= (Y)) && ((Y) <= (X))) ? 1 : 0) + +#ifndef MAKEWORD +#define MAKEWORD(X, Y) (((X) << 8) + (Y)) +#endif + +#define LSB(X) (((X) & 0xFF)) +#define MSB(Y) (((Y) >> 8) & 0xFF) + +#ifndef TRUE +#define TRUE (1 == 1) +#endif +#ifndef FALSE +#define FALSE (!TRUE) +#endif + +#define dprintk(args...) \ + do { \ + if (stvdebug) \ + printk(KERN_DEBUG args); \ + } while (0) + +#define STV0900_MAXLOOKUPSIZE 500 +#define STV0900_BLIND_SEARCH_AGC2_TH 700 +#define STV0900_BLIND_SEARCH_AGC2_TH_CUT30 1400 +#define IQPOWER_THRESHOLD 30 + +/* One point of the lookup table */ +struct stv000_lookpoint { + s32 realval;/* real value */ + s32 regval;/* binary value */ +}; + +/* Lookup table definition */ +struct stv0900_table{ + s32 size;/* Size of the lookup table */ + struct stv000_lookpoint table[STV0900_MAXLOOKUPSIZE];/* Lookup table */ +}; + +enum fe_stv0900_error { + STV0900_NO_ERROR = 0, + STV0900_INVALID_HANDLE, + STV0900_BAD_PARAMETER, + STV0900_I2C_ERROR, + STV0900_SEARCH_FAILED, +}; + +enum fe_stv0900_clock_type { + STV0900_USE_REGISTERS_DEFAULT, + STV0900_SERIAL_PUNCT_CLOCK,/*Serial punctured clock */ + STV0900_SERIAL_CONT_CLOCK,/*Serial continues clock */ + STV0900_PARALLEL_PUNCT_CLOCK,/*Parallel punctured clock */ + STV0900_DVBCI_CLOCK/*Parallel continues clock : DVBCI */ +}; + +enum fe_stv0900_search_state { + STV0900_SEARCH = 0, + STV0900_PLH_DETECTED, + STV0900_DVBS2_FOUND, + STV0900_DVBS_FOUND + +}; + +enum fe_stv0900_ldpc_state { + STV0900_PATH1_OFF_PATH2_OFF = 0, + STV0900_PATH1_ON_PATH2_OFF = 1, + STV0900_PATH1_OFF_PATH2_ON = 2, + STV0900_PATH1_ON_PATH2_ON = 3 +}; + +enum fe_stv0900_signal_type { + STV0900_NOAGC1 = 0, + STV0900_AGC1OK, + STV0900_NOTIMING, + STV0900_ANALOGCARRIER, + STV0900_TIMINGOK, + STV0900_NOAGC2, + STV0900_AGC2OK, + STV0900_NOCARRIER, + STV0900_CARRIEROK, + STV0900_NODATA, + STV0900_DATAOK, + STV0900_OUTOFRANGE, + STV0900_RANGEOK +}; + +enum fe_stv0900_demod_num { + STV0900_DEMOD_1, + STV0900_DEMOD_2 +}; + +enum fe_stv0900_tracking_standard { + STV0900_DVBS1_STANDARD,/* Found Standard*/ + STV0900_DVBS2_STANDARD, + STV0900_DSS_STANDARD, + STV0900_TURBOCODE_STANDARD, + STV0900_UNKNOWN_STANDARD +}; + +enum fe_stv0900_search_standard { + STV0900_AUTO_SEARCH, + STV0900_SEARCH_DVBS1,/* Search Standard*/ + STV0900_SEARCH_DVBS2, + STV0900_SEARCH_DSS, + STV0900_SEARCH_TURBOCODE +}; + +enum fe_stv0900_search_algo { + STV0900_BLIND_SEARCH,/* offset freq and SR are Unknown */ + STV0900_COLD_START,/* only the SR is known */ + STV0900_WARM_START/* offset freq and SR are known */ +}; + +enum fe_stv0900_modulation { + STV0900_QPSK, + STV0900_8PSK, + STV0900_16APSK, + STV0900_32APSK, + STV0900_UNKNOWN +}; + +enum fe_stv0900_modcode { + STV0900_DUMMY_PLF, + STV0900_QPSK_14, + STV0900_QPSK_13, + STV0900_QPSK_25, + STV0900_QPSK_12, + STV0900_QPSK_35, + STV0900_QPSK_23, + STV0900_QPSK_34, + STV0900_QPSK_45, + STV0900_QPSK_56, + STV0900_QPSK_89, + STV0900_QPSK_910, + STV0900_8PSK_35, + STV0900_8PSK_23, + STV0900_8PSK_34, + STV0900_8PSK_56, + STV0900_8PSK_89, + STV0900_8PSK_910, + STV0900_16APSK_23, + STV0900_16APSK_34, + STV0900_16APSK_45, + STV0900_16APSK_56, + STV0900_16APSK_89, + STV0900_16APSK_910, + STV0900_32APSK_34, + STV0900_32APSK_45, + STV0900_32APSK_56, + STV0900_32APSK_89, + STV0900_32APSK_910, + STV0900_MODCODE_UNKNOWN +}; + +enum fe_stv0900_fec {/*DVBS1, DSS and turbo code puncture rate*/ + STV0900_FEC_1_2 = 0, + STV0900_FEC_2_3, + STV0900_FEC_3_4, + STV0900_FEC_4_5,/*for turbo code only*/ + STV0900_FEC_5_6, + STV0900_FEC_6_7,/*for DSS only */ + STV0900_FEC_7_8, + STV0900_FEC_8_9,/*for turbo code only*/ + STV0900_FEC_UNKNOWN +}; + +enum fe_stv0900_frame_length { + STV0900_LONG_FRAME, + STV0900_SHORT_FRAME +}; + +enum fe_stv0900_pilot { + STV0900_PILOTS_OFF, + STV0900_PILOTS_ON +}; + +enum fe_stv0900_rolloff { + STV0900_35, + STV0900_25, + STV0900_20 +}; + +enum fe_stv0900_search_iq { + STV0900_IQ_AUTO, + STV0900_IQ_AUTO_NORMAL_FIRST, + STV0900_IQ_FORCE_NORMAL, + STV0900_IQ_FORCE_SWAPPED +}; + +enum stv0900_iq_inversion { + STV0900_IQ_NORMAL, + STV0900_IQ_SWAPPED +}; + +enum fe_stv0900_diseqc_mode { + STV0900_22KHZ_Continues = 0, + STV0900_DISEQC_2_3_PWM = 2, + STV0900_DISEQC_3_3_PWM = 3, + STV0900_DISEQC_2_3_ENVELOP = 4, + STV0900_DISEQC_3_3_ENVELOP = 5 +}; + +enum fe_stv0900_demod_mode { + STV0900_SINGLE = 0, + STV0900_DUAL +}; + +struct stv0900_init_params{ + u32 dmd_ref_clk;/* Reference,Input clock for the demod in Hz */ + + /* Demodulator Type (single demod or dual demod) */ + enum fe_stv0900_demod_mode demod_mode; + enum fe_stv0900_rolloff rolloff; + enum fe_stv0900_clock_type path1_ts_clock; + + u8 tun1_maddress; + int tuner1_adc; + int tuner1_type; + + /* IQ from the tuner1 to the demod */ + enum stv0900_iq_inversion tun1_iq_inv; + enum fe_stv0900_clock_type path2_ts_clock; + + u8 tun2_maddress; + int tuner2_adc; + int tuner2_type; + + /* IQ from the tuner2 to the demod */ + enum stv0900_iq_inversion tun2_iq_inv; + struct stv0900_reg *ts_config; +}; + +struct stv0900_search_params { + enum fe_stv0900_demod_num path;/* Path Used demod1 or 2 */ + + u32 frequency;/* Transponder frequency (in KHz) */ + u32 symbol_rate;/* Transponder symbol rate (in bds)*/ + u32 search_range;/* Range of the search (in Hz) */ + + enum fe_stv0900_search_standard standard; + enum fe_stv0900_modulation modulation; + enum fe_stv0900_fec fec; + enum fe_stv0900_modcode modcode; + enum fe_stv0900_search_iq iq_inversion; + enum fe_stv0900_search_algo search_algo; + +}; + +struct stv0900_signal_info { + int locked;/* Transponder locked */ + u32 frequency;/* Transponder frequency (in KHz) */ + u32 symbol_rate;/* Transponder symbol rate (in Mbds) */ + + enum fe_stv0900_tracking_standard standard; + enum fe_stv0900_fec fec; + enum fe_stv0900_modcode modcode; + enum fe_stv0900_modulation modulation; + enum fe_stv0900_pilot pilot; + enum fe_stv0900_frame_length frame_len; + enum stv0900_iq_inversion spectrum; + enum fe_stv0900_rolloff rolloff; + + s32 Power;/* Power of the RF signal (dBm) */ + s32 C_N;/* Carrier to noise ratio (dB x10)*/ + u32 BER;/* Bit error rate (x10^7) */ + +}; + +struct stv0900_internal{ + s32 quartz; + s32 mclk; + /* manual RollOff for DVBS1/DSS only */ + enum fe_stv0900_rolloff rolloff; + /* Demodulator use for single demod or for dual demod) */ + enum fe_stv0900_demod_mode demod_mode; + + /*Demods */ + s32 freq[2]; + s32 bw[2]; + s32 symbol_rate[2]; + s32 srch_range[2]; + /* for software/auto tuner */ + int tuner_type[2]; + + /* algorithm for search Blind, Cold or Warm*/ + enum fe_stv0900_search_algo srch_algo[2]; + /* search standard: Auto, DVBS1/DSS only or DVBS2 only*/ + enum fe_stv0900_search_standard srch_standard[2]; + /* inversion search : auto, auto norma first, normal or inverted */ + enum fe_stv0900_search_iq srch_iq_inv[2]; + enum fe_stv0900_modcode modcode[2]; + enum fe_stv0900_modulation modulation[2]; + enum fe_stv0900_fec fec[2]; + + struct stv0900_signal_info result[2]; + enum fe_stv0900_error err[2]; + + + struct i2c_adapter *i2c_adap; + u8 i2c_addr; + u8 clkmode;/* 0 for CLKI, 2 for XTALI */ + u8 chip_id; + struct stv0900_reg *ts_config; + enum fe_stv0900_error errs; + int dmds_used; +}; + +/* state for each demod */ +struct stv0900_state { + /* pointer for internal params, one for each pair of demods */ + struct stv0900_internal *internal; + struct i2c_adapter *i2c_adap; + const struct stv0900_config *config; + struct dvb_frontend frontend; + int demod; +}; + +extern int stvdebug; + +extern s32 ge2comp(s32 a, s32 width); + +extern void stv0900_write_reg(struct stv0900_internal *i_params, + u16 reg_addr, u8 reg_data); + +extern u8 stv0900_read_reg(struct stv0900_internal *i_params, + u16 reg_addr); + +extern void stv0900_write_bits(struct stv0900_internal *i_params, + u32 label, u8 val); + +extern u8 stv0900_get_bits(struct stv0900_internal *i_params, + u32 label); + +extern int stv0900_get_demod_lock(struct stv0900_internal *i_params, + enum fe_stv0900_demod_num demod, s32 time_out); +extern int stv0900_check_signal_presence(struct stv0900_internal *i_params, + enum fe_stv0900_demod_num demod); + +extern enum fe_stv0900_signal_type stv0900_algo(struct dvb_frontend *fe); + +extern void stv0900_set_tuner(struct dvb_frontend *fe, u32 frequency, + u32 bandwidth); +extern void stv0900_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth); + +extern void stv0900_start_search(struct stv0900_internal *i_params, + enum fe_stv0900_demod_num demod); + +extern u8 stv0900_get_optim_carr_loop(s32 srate, + enum fe_stv0900_modcode modcode, + s32 pilot, u8 chip_id); + +extern u8 stv0900_get_optim_short_carr_loop(s32 srate, + enum fe_stv0900_modulation modulation, + u8 chip_id); + +extern void stv0900_stop_all_s2_modcod(struct stv0900_internal *i_params, + enum fe_stv0900_demod_num demod); + +extern void stv0900_activate_s2_modcod(struct stv0900_internal *i_params, + enum fe_stv0900_demod_num demod); + +extern void stv0900_activate_s2_modcod_single(struct stv0900_internal *i_params, + enum fe_stv0900_demod_num demod); + +extern enum +fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe, + enum fe_stv0900_demod_num demod); + +extern u32 +stv0900_get_freq_auto(struct stv0900_internal *intp, int demod); + +extern void +stv0900_set_tuner_auto(struct stv0900_internal *intp, u32 Frequency, + u32 Bandwidth, int demod); + +#endif diff --git a/drivers/media/dvb-frontends/stv0900_reg.h b/drivers/media/dvb-frontends/stv0900_reg.h new file mode 100644 index 00000000..511ed2a2 --- /dev/null +++ b/drivers/media/dvb-frontends/stv0900_reg.h @@ -0,0 +1,3984 @@ +/* + * stv0900_reg.h + * + * Driver for ST STV0900 satellite demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef STV0900_REG_H +#define STV0900_REG_H + +extern s32 shiftx(s32 x, int demod, s32 shift); + +#define REGx(x) shiftx(x, demod, 0x200) +#define FLDx(x) shiftx(x, demod, 0x2000000) + +/*MID*/ +#define R0900_MID 0xf100 +#define F0900_MCHIP_IDENT 0xf10000f0 +#define F0900_MRELEASE 0xf100000f + +/*DACR1*/ +#define R0900_DACR1 0xf113 +#define F0900_DAC_MODE 0xf11300e0 +#define F0900_DAC_VALUE1 0xf113000f + +/*DACR2*/ +#define R0900_DACR2 0xf114 +#define F0900_DAC_VALUE0 0xf11400ff + +/*OUTCFG*/ +#define R0900_OUTCFG 0xf11c +#define F0900_OUTSERRS1_HZ 0xf11c0040 +#define F0900_OUTSERRS2_HZ 0xf11c0020 +#define F0900_OUTSERRS3_HZ 0xf11c0010 +#define F0900_OUTPARRS3_HZ 0xf11c0008 + +/*IRQSTATUS3*/ +#define R0900_IRQSTATUS3 0xf120 +#define F0900_SPLL_LOCK 0xf1200020 +#define F0900_SSTREAM_LCK_3 0xf1200010 +#define F0900_SSTREAM_LCK_2 0xf1200008 +#define F0900_SSTREAM_LCK_1 0xf1200004 +#define F0900_SDVBS1_PRF_2 0xf1200002 +#define F0900_SDVBS1_PRF_1 0xf1200001 + +/*IRQSTATUS2*/ +#define R0900_IRQSTATUS2 0xf121 +#define F0900_SSPY_ENDSIM_3 0xf1210080 +#define F0900_SSPY_ENDSIM_2 0xf1210040 +#define F0900_SSPY_ENDSIM_1 0xf1210020 +#define F0900_SPKTDEL_ERROR_2 0xf1210010 +#define F0900_SPKTDEL_LOCKB_2 0xf1210008 +#define F0900_SPKTDEL_LOCK_2 0xf1210004 +#define F0900_SPKTDEL_ERROR_1 0xf1210002 +#define F0900_SPKTDEL_LOCKB_1 0xf1210001 + +/*IRQSTATUS1*/ +#define R0900_IRQSTATUS1 0xf122 +#define F0900_SPKTDEL_LOCK_1 0xf1220080 +#define F0900_SDEMOD_LOCKB_2 0xf1220004 +#define F0900_SDEMOD_LOCK_2 0xf1220002 +#define F0900_SDEMOD_IRQ_2 0xf1220001 + +/*IRQSTATUS0*/ +#define R0900_IRQSTATUS0 0xf123 +#define F0900_SDEMOD_LOCKB_1 0xf1230080 +#define F0900_SDEMOD_LOCK_1 0xf1230040 +#define F0900_SDEMOD_IRQ_1 0xf1230020 +#define F0900_SBCH_ERRFLAG 0xf1230010 +#define F0900_SDISEQC2RX_IRQ 0xf1230008 +#define F0900_SDISEQC2TX_IRQ 0xf1230004 +#define F0900_SDISEQC1RX_IRQ 0xf1230002 +#define F0900_SDISEQC1TX_IRQ 0xf1230001 + +/*IRQMASK3*/ +#define R0900_IRQMASK3 0xf124 +#define F0900_MPLL_LOCK 0xf1240020 +#define F0900_MSTREAM_LCK_3 0xf1240010 +#define F0900_MSTREAM_LCK_2 0xf1240008 +#define F0900_MSTREAM_LCK_1 0xf1240004 +#define F0900_MDVBS1_PRF_2 0xf1240002 +#define F0900_MDVBS1_PRF_1 0xf1240001 + +/*IRQMASK2*/ +#define R0900_IRQMASK2 0xf125 +#define F0900_MSPY_ENDSIM_3 0xf1250080 +#define F0900_MSPY_ENDSIM_2 0xf1250040 +#define F0900_MSPY_ENDSIM_1 0xf1250020 +#define F0900_MPKTDEL_ERROR_2 0xf1250010 +#define F0900_MPKTDEL_LOCKB_2 0xf1250008 +#define F0900_MPKTDEL_LOCK_2 0xf1250004 +#define F0900_MPKTDEL_ERROR_1 0xf1250002 +#define F0900_MPKTDEL_LOCKB_1 0xf1250001 + +/*IRQMASK1*/ +#define R0900_IRQMASK1 0xf126 +#define F0900_MPKTDEL_LOCK_1 0xf1260080 +#define F0900_MEXTPINB2 0xf1260040 +#define F0900_MEXTPIN2 0xf1260020 +#define F0900_MEXTPINB1 0xf1260010 +#define F0900_MEXTPIN1 0xf1260008 +#define F0900_MDEMOD_LOCKB_2 0xf1260004 +#define F0900_MDEMOD_LOCK_2 0xf1260002 +#define F0900_MDEMOD_IRQ_2 0xf1260001 + +/*IRQMASK0*/ +#define R0900_IRQMASK0 0xf127 +#define F0900_MDEMOD_LOCKB_1 0xf1270080 +#define F0900_MDEMOD_LOCK_1 0xf1270040 +#define F0900_MDEMOD_IRQ_1 0xf1270020 +#define F0900_MBCH_ERRFLAG 0xf1270010 +#define F0900_MDISEQC2RX_IRQ 0xf1270008 +#define F0900_MDISEQC2TX_IRQ 0xf1270004 +#define F0900_MDISEQC1RX_IRQ 0xf1270002 +#define F0900_MDISEQC1TX_IRQ 0xf1270001 + +/*I2CCFG*/ +#define R0900_I2CCFG 0xf129 +#define F0900_I2C_FASTMODE 0xf1290008 +#define F0900_I2CADDR_INC 0xf1290003 + +/*P1_I2CRPT*/ +#define R0900_P1_I2CRPT 0xf12a +#define I2CRPT shiftx(R0900_P1_I2CRPT, demod, -1) +#define F0900_P1_I2CT_ON 0xf12a0080 +#define I2CT_ON shiftx(F0900_P1_I2CT_ON, demod, -0x10000) +#define F0900_P1_ENARPT_LEVEL 0xf12a0070 +#define F0900_P1_SCLT_DELAY 0xf12a0008 +#define F0900_P1_STOP_ENABLE 0xf12a0004 +#define F0900_P1_STOP_SDAT2SDA 0xf12a0002 + +/*P2_I2CRPT*/ +#define R0900_P2_I2CRPT 0xf12b +#define F0900_P2_I2CT_ON 0xf12b0080 +#define F0900_P2_ENARPT_LEVEL 0xf12b0070 +#define F0900_P2_SCLT_DELAY 0xf12b0008 +#define F0900_P2_STOP_ENABLE 0xf12b0004 +#define F0900_P2_STOP_SDAT2SDA 0xf12b0002 + +/*IOPVALUE6*/ +#define R0900_IOPVALUE6 0xf138 +#define F0900_VSCL 0xf1380004 +#define F0900_VSDA 0xf1380002 +#define F0900_VDATA3_0 0xf1380001 + +/*IOPVALUE5*/ +#define R0900_IOPVALUE5 0xf139 +#define F0900_VDATA3_1 0xf1390080 +#define F0900_VDATA3_2 0xf1390040 +#define F0900_VDATA3_3 0xf1390020 +#define F0900_VDATA3_4 0xf1390010 +#define F0900_VDATA3_5 0xf1390008 +#define F0900_VDATA3_6 0xf1390004 +#define F0900_VDATA3_7 0xf1390002 +#define F0900_VCLKOUT3 0xf1390001 + +/*IOPVALUE4*/ +#define R0900_IOPVALUE4 0xf13a +#define F0900_VSTROUT3 0xf13a0080 +#define F0900_VDPN3 0xf13a0040 +#define F0900_VERROR3 0xf13a0020 +#define F0900_VDATA2_7 0xf13a0010 +#define F0900_VCLKOUT2 0xf13a0008 +#define F0900_VSTROUT2 0xf13a0004 +#define F0900_VDPN2 0xf13a0002 +#define F0900_VERROR2 0xf13a0001 + +/*IOPVALUE3*/ +#define R0900_IOPVALUE3 0xf13b +#define F0900_VDATA1_7 0xf13b0080 +#define F0900_VCLKOUT1 0xf13b0040 +#define F0900_VSTROUT1 0xf13b0020 +#define F0900_VDPN1 0xf13b0010 +#define F0900_VERROR1 0xf13b0008 +#define F0900_VCLKOUT27 0xf13b0004 +#define F0900_VDISEQCOUT2 0xf13b0002 +#define F0900_VSCLT2 0xf13b0001 + +/*IOPVALUE2*/ +#define R0900_IOPVALUE2 0xf13c +#define F0900_VSDAT2 0xf13c0080 +#define F0900_VAGCRF2 0xf13c0040 +#define F0900_VDISEQCOUT1 0xf13c0020 +#define F0900_VSCLT1 0xf13c0010 +#define F0900_VSDAT1 0xf13c0008 +#define F0900_VAGCRF1 0xf13c0004 +#define F0900_VDIRCLK 0xf13c0002 +#define F0900_VSTDBY 0xf13c0001 + +/*IOPVALUE1*/ +#define R0900_IOPVALUE1 0xf13d +#define F0900_VCS1 0xf13d0080 +#define F0900_VCS0 0xf13d0040 +#define F0900_VGPIO13 0xf13d0020 +#define F0900_VGPIO12 0xf13d0010 +#define F0900_VGPIO11 0xf13d0008 +#define F0900_VGPIO10 0xf13d0004 +#define F0900_VGPIO9 0xf13d0002 +#define F0900_VGPIO8 0xf13d0001 + +/*IOPVALUE0*/ +#define R0900_IOPVALUE0 0xf13e +#define F0900_VGPIO7 0xf13e0080 +#define F0900_VGPIO6 0xf13e0040 +#define F0900_VGPIO5 0xf13e0020 +#define F0900_VGPIO4 0xf13e0010 +#define F0900_VGPIO3 0xf13e0008 +#define F0900_VGPIO2 0xf13e0004 +#define F0900_VGPIO1 0xf13e0002 +#define F0900_VCLKI2 0xf13e0001 + +/*CLKI2CFG*/ +#define R0900_CLKI2CFG 0xf140 +#define F0900_CLKI2_OPD 0xf1400080 +#define F0900_CLKI2_CONFIG 0xf140007e +#define F0900_CLKI2_XOR 0xf1400001 + +/*GPIO1CFG*/ +#define R0900_GPIO1CFG 0xf141 +#define F0900_GPIO1_OPD 0xf1410080 +#define F0900_GPIO1_CONFIG 0xf141007e +#define F0900_GPIO1_XOR 0xf1410001 + +/*GPIO2CFG*/ +#define R0900_GPIO2CFG 0xf142 +#define F0900_GPIO2_OPD 0xf1420080 +#define F0900_GPIO2_CONFIG 0xf142007e +#define F0900_GPIO2_XOR 0xf1420001 + +/*GPIO3CFG*/ +#define R0900_GPIO3CFG 0xf143 +#define F0900_GPIO3_OPD 0xf1430080 +#define F0900_GPIO3_CONFIG 0xf143007e +#define F0900_GPIO3_XOR 0xf1430001 + +/*GPIO4CFG*/ +#define R0900_GPIO4CFG 0xf144 +#define F0900_GPIO4_OPD 0xf1440080 +#define F0900_GPIO4_CONFIG 0xf144007e +#define F0900_GPIO4_XOR 0xf1440001 + +/*GPIO5CFG*/ +#define R0900_GPIO5CFG 0xf145 +#define F0900_GPIO5_OPD 0xf1450080 +#define F0900_GPIO5_CONFIG 0xf145007e +#define F0900_GPIO5_XOR 0xf1450001 + +/*GPIO6CFG*/ +#define R0900_GPIO6CFG 0xf146 +#define F0900_GPIO6_OPD 0xf1460080 +#define F0900_GPIO6_CONFIG 0xf146007e +#define F0900_GPIO6_XOR 0xf1460001 + +/*GPIO7CFG*/ +#define R0900_GPIO7CFG 0xf147 +#define F0900_GPIO7_OPD 0xf1470080 +#define F0900_GPIO7_CONFIG 0xf147007e +#define F0900_GPIO7_XOR 0xf1470001 + +/*GPIO8CFG*/ +#define R0900_GPIO8CFG 0xf148 +#define F0900_GPIO8_OPD 0xf1480080 +#define F0900_GPIO8_CONFIG 0xf148007e +#define F0900_GPIO8_XOR 0xf1480001 + +/*GPIO9CFG*/ +#define R0900_GPIO9CFG 0xf149 +#define F0900_GPIO9_OPD 0xf1490080 +#define F0900_GPIO9_CONFIG 0xf149007e +#define F0900_GPIO9_XOR 0xf1490001 + +/*GPIO10CFG*/ +#define R0900_GPIO10CFG 0xf14a +#define F0900_GPIO10_OPD 0xf14a0080 +#define F0900_GPIO10_CONFIG 0xf14a007e +#define F0900_GPIO10_XOR 0xf14a0001 + +/*GPIO11CFG*/ +#define R0900_GPIO11CFG 0xf14b +#define F0900_GPIO11_OPD 0xf14b0080 +#define F0900_GPIO11_CONFIG 0xf14b007e +#define F0900_GPIO11_XOR 0xf14b0001 + +/*GPIO12CFG*/ +#define R0900_GPIO12CFG 0xf14c +#define F0900_GPIO12_OPD 0xf14c0080 +#define F0900_GPIO12_CONFIG 0xf14c007e +#define F0900_GPIO12_XOR 0xf14c0001 + +/*GPIO13CFG*/ +#define R0900_GPIO13CFG 0xf14d +#define F0900_GPIO13_OPD 0xf14d0080 +#define F0900_GPIO13_CONFIG 0xf14d007e +#define F0900_GPIO13_XOR 0xf14d0001 + +/*CS0CFG*/ +#define R0900_CS0CFG 0xf14e +#define F0900_CS0_OPD 0xf14e0080 +#define F0900_CS0_CONFIG 0xf14e007e +#define F0900_CS0_XOR 0xf14e0001 + +/*CS1CFG*/ +#define R0900_CS1CFG 0xf14f +#define F0900_CS1_OPD 0xf14f0080 +#define F0900_CS1_CONFIG 0xf14f007e +#define F0900_CS1_XOR 0xf14f0001 + +/*STDBYCFG*/ +#define R0900_STDBYCFG 0xf150 +#define F0900_STDBY_OPD 0xf1500080 +#define F0900_STDBY_CONFIG 0xf150007e +#define F0900_STBDY_XOR 0xf1500001 + +/*DIRCLKCFG*/ +#define R0900_DIRCLKCFG 0xf151 +#define F0900_DIRCLK_OPD 0xf1510080 +#define F0900_DIRCLK_CONFIG 0xf151007e +#define F0900_DIRCLK_XOR 0xf1510001 + +/*AGCRF1CFG*/ +#define R0900_AGCRF1CFG 0xf152 +#define F0900_AGCRF1_OPD 0xf1520080 +#define F0900_AGCRF1_CONFIG 0xf152007e +#define F0900_AGCRF1_XOR 0xf1520001 + +/*SDAT1CFG*/ +#define R0900_SDAT1CFG 0xf153 +#define F0900_SDAT1_OPD 0xf1530080 +#define F0900_SDAT1_CONFIG 0xf153007e +#define F0900_SDAT1_XOR 0xf1530001 + +/*SCLT1CFG*/ +#define R0900_SCLT1CFG 0xf154 +#define F0900_SCLT1_OPD 0xf1540080 +#define F0900_SCLT1_CONFIG 0xf154007e +#define F0900_SCLT1_XOR 0xf1540001 + +/*DISEQCO1CFG*/ +#define R0900_DISEQCO1CFG 0xf155 +#define F0900_DISEQCO1_OPD 0xf1550080 +#define F0900_DISEQCO1_CONFIG 0xf155007e +#define F0900_DISEQC1_XOR 0xf1550001 + +/*AGCRF2CFG*/ +#define R0900_AGCRF2CFG 0xf156 +#define F0900_AGCRF2_OPD 0xf1560080 +#define F0900_AGCRF2_CONFIG 0xf156007e +#define F0900_AGCRF2_XOR 0xf1560001 + +/*SDAT2CFG*/ +#define R0900_SDAT2CFG 0xf157 +#define F0900_SDAT2_OPD 0xf1570080 +#define F0900_SDAT2_CONFIG 0xf157007e +#define F0900_SDAT2_XOR 0xf1570001 + +/*SCLT2CFG*/ +#define R0900_SCLT2CFG 0xf158 +#define F0900_SCLT2_OPD 0xf1580080 +#define F0900_SCLT2_CONFIG 0xf158007e +#define F0900_SCLT2_XOR 0xf1580001 + +/*DISEQCO2CFG*/ +#define R0900_DISEQCO2CFG 0xf159 +#define F0900_DISEQCO2_OPD 0xf1590080 +#define F0900_DISEQCO2_CONFIG 0xf159007e +#define F0900_DISEQC2_XOR 0xf1590001 + +/*CLKOUT27CFG*/ +#define R0900_CLKOUT27CFG 0xf15a +#define F0900_CLKOUT27_OPD 0xf15a0080 +#define F0900_CLKOUT27_CONFIG 0xf15a007e +#define F0900_CLKOUT27_XOR 0xf15a0001 + +/*ERROR1CFG*/ +#define R0900_ERROR1CFG 0xf15b +#define F0900_ERROR1_OPD 0xf15b0080 +#define F0900_ERROR1_CONFIG 0xf15b007e +#define F0900_ERROR1_XOR 0xf15b0001 + +/*DPN1CFG*/ +#define R0900_DPN1CFG 0xf15c +#define F0900_DPN1_OPD 0xf15c0080 +#define F0900_DPN1_CONFIG 0xf15c007e +#define F0900_DPN1_XOR 0xf15c0001 + +/*STROUT1CFG*/ +#define R0900_STROUT1CFG 0xf15d +#define F0900_STROUT1_OPD 0xf15d0080 +#define F0900_STROUT1_CONFIG 0xf15d007e +#define F0900_STROUT1_XOR 0xf15d0001 + +/*CLKOUT1CFG*/ +#define R0900_CLKOUT1CFG 0xf15e +#define F0900_CLKOUT1_OPD 0xf15e0080 +#define F0900_CLKOUT1_CONFIG 0xf15e007e +#define F0900_CLKOUT1_XOR 0xf15e0001 + +/*DATA71CFG*/ +#define R0900_DATA71CFG 0xf15f +#define F0900_DATA71_OPD 0xf15f0080 +#define F0900_DATA71_CONFIG 0xf15f007e +#define F0900_DATA71_XOR 0xf15f0001 + +/*ERROR2CFG*/ +#define R0900_ERROR2CFG 0xf160 +#define F0900_ERROR2_OPD 0xf1600080 +#define F0900_ERROR2_CONFIG 0xf160007e +#define F0900_ERROR2_XOR 0xf1600001 + +/*DPN2CFG*/ +#define R0900_DPN2CFG 0xf161 +#define F0900_DPN2_OPD 0xf1610080 +#define F0900_DPN2_CONFIG 0xf161007e +#define F0900_DPN2_XOR 0xf1610001 + +/*STROUT2CFG*/ +#define R0900_STROUT2CFG 0xf162 +#define F0900_STROUT2_OPD 0xf1620080 +#define F0900_STROUT2_CONFIG 0xf162007e +#define F0900_STROUT2_XOR 0xf1620001 + +/*CLKOUT2CFG*/ +#define R0900_CLKOUT2CFG 0xf163 +#define F0900_CLKOUT2_OPD 0xf1630080 +#define F0900_CLKOUT2_CONFIG 0xf163007e +#define F0900_CLKOUT2_XOR 0xf1630001 + +/*DATA72CFG*/ +#define R0900_DATA72CFG 0xf164 +#define F0900_DATA72_OPD 0xf1640080 +#define F0900_DATA72_CONFIG 0xf164007e +#define F0900_DATA72_XOR 0xf1640001 + +/*ERROR3CFG*/ +#define R0900_ERROR3CFG 0xf165 +#define F0900_ERROR3_OPD 0xf1650080 +#define F0900_ERROR3_CONFIG 0xf165007e +#define F0900_ERROR3_XOR 0xf1650001 + +/*DPN3CFG*/ +#define R0900_DPN3CFG 0xf166 +#define F0900_DPN3_OPD 0xf1660080 +#define F0900_DPN3_CONFIG 0xf166007e +#define F0900_DPN3_XOR 0xf1660001 + +/*STROUT3CFG*/ +#define R0900_STROUT3CFG 0xf167 +#define F0900_STROUT3_OPD 0xf1670080 +#define F0900_STROUT3_CONFIG 0xf167007e +#define F0900_STROUT3_XOR 0xf1670001 + +/*CLKOUT3CFG*/ +#define R0900_CLKOUT3CFG 0xf168 +#define F0900_CLKOUT3_OPD 0xf1680080 +#define F0900_CLKOUT3_CONFIG 0xf168007e +#define F0900_CLKOUT3_XOR 0xf1680001 + +/*DATA73CFG*/ +#define R0900_DATA73CFG 0xf169 +#define F0900_DATA73_OPD 0xf1690080 +#define F0900_DATA73_CONFIG 0xf169007e +#define F0900_DATA73_XOR 0xf1690001 + +/*STRSTATUS1*/ +#define R0900_STRSTATUS1 0xf16a +#define F0900_STRSTATUS_SEL2 0xf16a00f0 +#define F0900_STRSTATUS_SEL1 0xf16a000f + +/*STRSTATUS2*/ +#define R0900_STRSTATUS2 0xf16b +#define F0900_STRSTATUS_SEL4 0xf16b00f0 +#define F0900_STRSTATUS_SEL3 0xf16b000f + +/*STRSTATUS3*/ +#define R0900_STRSTATUS3 0xf16c +#define F0900_STRSTATUS_SEL6 0xf16c00f0 +#define F0900_STRSTATUS_SEL5 0xf16c000f + +/*FSKTFC2*/ +#define R0900_FSKTFC2 0xf170 +#define F0900_FSKT_KMOD 0xf17000fc +#define F0900_FSKT_CAR2 0xf1700003 + +/*FSKTFC1*/ +#define R0900_FSKTFC1 0xf171 +#define F0900_FSKT_CAR1 0xf17100ff + +/*FSKTFC0*/ +#define R0900_FSKTFC0 0xf172 +#define F0900_FSKT_CAR0 0xf17200ff + +/*FSKTDELTAF1*/ +#define R0900_FSKTDELTAF1 0xf173 +#define F0900_FSKT_DELTAF1 0xf173000f + +/*FSKTDELTAF0*/ +#define R0900_FSKTDELTAF0 0xf174 +#define F0900_FSKT_DELTAF0 0xf17400ff + +/*FSKTCTRL*/ +#define R0900_FSKTCTRL 0xf175 +#define F0900_FSKT_EN_SGN 0xf1750040 +#define F0900_FSKT_MOD_SGN 0xf1750020 +#define F0900_FSKT_MOD_EN 0xf175001c +#define F0900_FSKT_DACMODE 0xf1750003 + +/*FSKRFC2*/ +#define R0900_FSKRFC2 0xf176 +#define F0900_FSKR_DETSGN 0xf1760040 +#define F0900_FSKR_OUTSGN 0xf1760020 +#define F0900_FSKR_KAGC 0xf176001c +#define F0900_FSKR_CAR2 0xf1760003 + +/*FSKRFC1*/ +#define R0900_FSKRFC1 0xf177 +#define F0900_FSKR_CAR1 0xf17700ff + +/*FSKRFC0*/ +#define R0900_FSKRFC0 0xf178 +#define F0900_FSKR_CAR0 0xf17800ff + +/*FSKRK1*/ +#define R0900_FSKRK1 0xf179 +#define F0900_FSKR_K1_EXP 0xf17900e0 +#define F0900_FSKR_K1_MANT 0xf179001f + +/*FSKRK2*/ +#define R0900_FSKRK2 0xf17a +#define F0900_FSKR_K2_EXP 0xf17a00e0 +#define F0900_FSKR_K2_MANT 0xf17a001f + +/*FSKRAGCR*/ +#define R0900_FSKRAGCR 0xf17b +#define F0900_FSKR_OUTCTL 0xf17b00c0 +#define F0900_FSKR_AGC_REF 0xf17b003f + +/*FSKRAGC*/ +#define R0900_FSKRAGC 0xf17c +#define F0900_FSKR_AGC_ACCU 0xf17c00ff + +/*FSKRALPHA*/ +#define R0900_FSKRALPHA 0xf17d +#define F0900_FSKR_ALPHA_EXP 0xf17d001c +#define F0900_FSKR_ALPHA_M 0xf17d0003 + +/*FSKRPLTH1*/ +#define R0900_FSKRPLTH1 0xf17e +#define F0900_FSKR_BETA 0xf17e00f0 +#define F0900_FSKR_PLL_TRESH1 0xf17e000f + +/*FSKRPLTH0*/ +#define R0900_FSKRPLTH0 0xf17f +#define F0900_FSKR_PLL_TRESH0 0xf17f00ff + +/*FSKRDF1*/ +#define R0900_FSKRDF1 0xf180 +#define F0900_FSKR_OUT 0xf1800080 +#define F0900_FSKR_DELTAF1 0xf180001f + +/*FSKRDF0*/ +#define R0900_FSKRDF0 0xf181 +#define F0900_FSKR_DELTAF0 0xf18100ff + +/*FSKRSTEPP*/ +#define R0900_FSKRSTEPP 0xf182 +#define F0900_FSKR_STEP_PLUS 0xf18200ff + +/*FSKRSTEPM*/ +#define R0900_FSKRSTEPM 0xf183 +#define F0900_FSKR_STEP_MINUS 0xf18300ff + +/*FSKRDET1*/ +#define R0900_FSKRDET1 0xf184 +#define F0900_FSKR_DETECT 0xf1840080 +#define F0900_FSKR_CARDET_ACCU1 0xf184000f + +/*FSKRDET0*/ +#define R0900_FSKRDET0 0xf185 +#define F0900_FSKR_CARDET_ACCU0 0xf18500ff + +/*FSKRDTH1*/ +#define R0900_FSKRDTH1 0xf186 +#define F0900_FSKR_CARLOSS_THRESH1 0xf18600f0 +#define F0900_FSKR_CARDET_THRESH1 0xf186000f + +/*FSKRDTH0*/ +#define R0900_FSKRDTH0 0xf187 +#define F0900_FSKR_CARDET_THRESH0 0xf18700ff + +/*FSKRLOSS*/ +#define R0900_FSKRLOSS 0xf188 +#define F0900_FSKR_CARLOSS_THRESH0 0xf18800ff + +/*P2_DISTXCTL*/ +#define R0900_P2_DISTXCTL 0xf190 +#define F0900_P2_TIM_OFF 0xf1900080 +#define F0900_P2_DISEQC_RESET 0xf1900040 +#define F0900_P2_TIM_CMD 0xf1900030 +#define F0900_P2_DIS_PRECHARGE 0xf1900008 +#define F0900_P2_DISTX_MODE 0xf1900007 + +/*P2_DISRXCTL*/ +#define R0900_P2_DISRXCTL 0xf191 +#define F0900_P2_RECEIVER_ON 0xf1910080 +#define F0900_P2_IGNO_SHORT22K 0xf1910040 +#define F0900_P2_ONECHIP_TRX 0xf1910020 +#define F0900_P2_EXT_ENVELOP 0xf1910010 +#define F0900_P2_PIN_SELECT0 0xf191000c +#define F0900_P2_IRQ_RXEND 0xf1910002 +#define F0900_P2_IRQ_4NBYTES 0xf1910001 + +/*P2_DISRX_ST0*/ +#define R0900_P2_DISRX_ST0 0xf194 +#define F0900_P2_RX_END 0xf1940080 +#define F0900_P2_RX_ACTIVE 0xf1940040 +#define F0900_P2_SHORT_22KHZ 0xf1940020 +#define F0900_P2_CONT_TONE 0xf1940010 +#define F0900_P2_FIFO_4BREADY 0xf1940008 +#define F0900_P2_FIFO_EMPTY 0xf1940004 +#define F0900_P2_ABORT_DISRX 0xf1940001 + +/*P2_DISRX_ST1*/ +#define R0900_P2_DISRX_ST1 0xf195 +#define F0900_P2_RX_FAIL 0xf1950080 +#define F0900_P2_FIFO_PARITYFAIL 0xf1950040 +#define F0900_P2_RX_NONBYTE 0xf1950020 +#define F0900_P2_FIFO_OVERFLOW 0xf1950010 +#define F0900_P2_FIFO_BYTENBR 0xf195000f + +/*P2_DISRXDATA*/ +#define R0900_P2_DISRXDATA 0xf196 +#define F0900_P2_DISRX_DATA 0xf19600ff + +/*P2_DISTXDATA*/ +#define R0900_P2_DISTXDATA 0xf197 +#define F0900_P2_DISEQC_FIFO 0xf19700ff + +/*P2_DISTXSTATUS*/ +#define R0900_P2_DISTXSTATUS 0xf198 +#define F0900_P2_TX_FAIL 0xf1980080 +#define F0900_P2_FIFO_FULL 0xf1980040 +#define F0900_P2_TX_IDLE 0xf1980020 +#define F0900_P2_GAP_BURST 0xf1980010 +#define F0900_P2_TXFIFO_BYTES 0xf198000f + +/*P2_F22TX*/ +#define R0900_P2_F22TX 0xf199 +#define F0900_P2_F22_REG 0xf19900ff + +/*P2_F22RX*/ +#define R0900_P2_F22RX 0xf19a +#define F0900_P2_F22RX_REG 0xf19a00ff + +/*P2_ACRPRESC*/ +#define R0900_P2_ACRPRESC 0xf19c +#define F0900_P2_ACR_PRESC 0xf19c0007 + +/*P2_ACRDIV*/ +#define R0900_P2_ACRDIV 0xf19d +#define F0900_P2_ACR_DIV 0xf19d00ff + +/*P1_DISTXCTL*/ +#define R0900_P1_DISTXCTL 0xf1a0 +#define DISTXCTL shiftx(R0900_P1_DISTXCTL, demod, 0x10) +#define F0900_P1_TIM_OFF 0xf1a00080 +#define F0900_P1_DISEQC_RESET 0xf1a00040 +#define DISEQC_RESET shiftx(F0900_P1_DISEQC_RESET, demod, 0x100000) +#define F0900_P1_TIM_CMD 0xf1a00030 +#define F0900_P1_DIS_PRECHARGE 0xf1a00008 +#define DIS_PRECHARGE shiftx(F0900_P1_DIS_PRECHARGE, demod, 0x100000) +#define F0900_P1_DISTX_MODE 0xf1a00007 +#define DISTX_MODE shiftx(F0900_P1_DISTX_MODE, demod, 0x100000) + +/*P1_DISRXCTL*/ +#define R0900_P1_DISRXCTL 0xf1a1 +#define DISRXCTL shiftx(R0900_P1_DISRXCTL, demod, 0x10) +#define F0900_P1_RECEIVER_ON 0xf1a10080 +#define F0900_P1_IGNO_SHORT22K 0xf1a10040 +#define F0900_P1_ONECHIP_TRX 0xf1a10020 +#define F0900_P1_EXT_ENVELOP 0xf1a10010 +#define F0900_P1_PIN_SELECT0 0xf1a1000c +#define F0900_P1_IRQ_RXEND 0xf1a10002 +#define F0900_P1_IRQ_4NBYTES 0xf1a10001 + +/*P1_DISRX_ST0*/ +#define R0900_P1_DISRX_ST0 0xf1a4 +#define DISRX_ST0 shiftx(R0900_P1_DISRX_ST0, demod, 0x10) +#define F0900_P1_RX_END 0xf1a40080 +#define RX_END shiftx(F0900_P1_RX_END, demod, 0x100000) +#define F0900_P1_RX_ACTIVE 0xf1a40040 +#define F0900_P1_SHORT_22KHZ 0xf1a40020 +#define F0900_P1_CONT_TONE 0xf1a40010 +#define F0900_P1_FIFO_4BREADY 0xf1a40008 +#define F0900_P1_FIFO_EMPTY 0xf1a40004 +#define F0900_P1_ABORT_DISRX 0xf1a40001 + +/*P1_DISRX_ST1*/ +#define R0900_P1_DISRX_ST1 0xf1a5 +#define DISRX_ST1 shiftx(R0900_P1_DISRX_ST1, demod, 0x10) +#define F0900_P1_RX_FAIL 0xf1a50080 +#define F0900_P1_FIFO_PARITYFAIL 0xf1a50040 +#define F0900_P1_RX_NONBYTE 0xf1a50020 +#define F0900_P1_FIFO_OVERFLOW 0xf1a50010 +#define F0900_P1_FIFO_BYTENBR 0xf1a5000f +#define FIFO_BYTENBR shiftx(F0900_P1_FIFO_BYTENBR, demod, 0x100000) + +/*P1_DISRXDATA*/ +#define R0900_P1_DISRXDATA 0xf1a6 +#define DISRXDATA shiftx(R0900_P1_DISRXDATA, demod, 0x10) +#define F0900_P1_DISRX_DATA 0xf1a600ff + +/*P1_DISTXDATA*/ +#define R0900_P1_DISTXDATA 0xf1a7 +#define DISTXDATA shiftx(R0900_P1_DISTXDATA, demod, 0x10) +#define F0900_P1_DISEQC_FIFO 0xf1a700ff + +/*P1_DISTXSTATUS*/ +#define R0900_P1_DISTXSTATUS 0xf1a8 +#define F0900_P1_TX_FAIL 0xf1a80080 +#define F0900_P1_FIFO_FULL 0xf1a80040 +#define FIFO_FULL shiftx(F0900_P1_FIFO_FULL, demod, 0x100000) +#define F0900_P1_TX_IDLE 0xf1a80020 +#define TX_IDLE shiftx(F0900_P1_TX_IDLE, demod, 0x100000) +#define F0900_P1_GAP_BURST 0xf1a80010 +#define F0900_P1_TXFIFO_BYTES 0xf1a8000f + +/*P1_F22TX*/ +#define R0900_P1_F22TX 0xf1a9 +#define F22TX shiftx(R0900_P1_F22TX, demod, 0x10) +#define F0900_P1_F22_REG 0xf1a900ff + +/*P1_F22RX*/ +#define R0900_P1_F22RX 0xf1aa +#define F22RX shiftx(R0900_P1_F22RX, demod, 0x10) +#define F0900_P1_F22RX_REG 0xf1aa00ff + +/*P1_ACRPRESC*/ +#define R0900_P1_ACRPRESC 0xf1ac +#define ACRPRESC shiftx(R0900_P1_ACRPRESC, demod, 0x10) +#define F0900_P1_ACR_PRESC 0xf1ac0007 + +/*P1_ACRDIV*/ +#define R0900_P1_ACRDIV 0xf1ad +#define ACRDIV shiftx(R0900_P1_ACRDIV, demod, 0x10) +#define F0900_P1_ACR_DIV 0xf1ad00ff + +/*NCOARSE*/ +#define R0900_NCOARSE 0xf1b3 +#define F0900_M_DIV 0xf1b300ff + +/*SYNTCTRL*/ +#define R0900_SYNTCTRL 0xf1b6 +#define F0900_STANDBY 0xf1b60080 +#define F0900_BYPASSPLLCORE 0xf1b60040 +#define F0900_SELX1RATIO 0xf1b60020 +#define F0900_STOP_PLL 0xf1b60008 +#define F0900_BYPASSPLLFSK 0xf1b60004 +#define F0900_SELOSCI 0xf1b60002 +#define F0900_BYPASSPLLADC 0xf1b60001 + +/*FILTCTRL*/ +#define R0900_FILTCTRL 0xf1b7 +#define F0900_INV_CLK135 0xf1b70080 +#define F0900_SEL_FSKCKDIV 0xf1b70004 +#define F0900_INV_CLKFSK 0xf1b70002 +#define F0900_BYPASS_APPLI 0xf1b70001 + +/*PLLSTAT*/ +#define R0900_PLLSTAT 0xf1b8 +#define F0900_PLLLOCK 0xf1b80001 + +/*STOPCLK1*/ +#define R0900_STOPCLK1 0xf1c2 +#define F0900_STOP_CLKPKDT2 0xf1c20040 +#define F0900_STOP_CLKPKDT1 0xf1c20020 +#define F0900_STOP_CLKFEC 0xf1c20010 +#define F0900_STOP_CLKADCI2 0xf1c20008 +#define F0900_INV_CLKADCI2 0xf1c20004 +#define F0900_STOP_CLKADCI1 0xf1c20002 +#define F0900_INV_CLKADCI1 0xf1c20001 + +/*STOPCLK2*/ +#define R0900_STOPCLK2 0xf1c3 +#define F0900_STOP_CLKSAMP2 0xf1c30010 +#define F0900_STOP_CLKSAMP1 0xf1c30008 +#define F0900_STOP_CLKVIT2 0xf1c30004 +#define F0900_STOP_CLKVIT1 0xf1c30002 +#define STOP_CLKVIT shiftx(F0900_STOP_CLKVIT1, demod, -2) +#define F0900_STOP_CLKTS 0xf1c30001 + +/*TSTTNR0*/ +#define R0900_TSTTNR0 0xf1df +#define F0900_SEL_FSK 0xf1df0080 +#define F0900_FSK_PON 0xf1df0004 + +/*TSTTNR1*/ +#define R0900_TSTTNR1 0xf1e0 +#define F0900_ADC1_PON 0xf1e00002 +#define F0900_ADC1_INMODE 0xf1e00001 + +/*TSTTNR2*/ +#define R0900_TSTTNR2 0xf1e1 +#define F0900_DISEQC1_PON 0xf1e10020 + +/*TSTTNR3*/ +#define R0900_TSTTNR3 0xf1e2 +#define F0900_ADC2_PON 0xf1e20002 +#define F0900_ADC2_INMODE 0xf1e20001 + +/*TSTTNR4*/ +#define R0900_TSTTNR4 0xf1e3 +#define F0900_DISEQC2_PON 0xf1e30020 + +/*P2_IQCONST*/ +#define R0900_P2_IQCONST 0xf200 +#define F0900_P2_CONSTEL_SELECT 0xf2000060 +#define F0900_P2_IQSYMB_SEL 0xf200001f + +/*P2_NOSCFG*/ +#define R0900_P2_NOSCFG 0xf201 +#define F0900_P2_DUMMYPL_NOSDATA 0xf2010020 +#define F0900_P2_NOSPLH_BETA 0xf2010018 +#define F0900_P2_NOSDATA_BETA 0xf2010007 + +/*P2_ISYMB*/ +#define R0900_P2_ISYMB 0xf202 +#define F0900_P2_I_SYMBOL 0xf20201ff + +/*P2_QSYMB*/ +#define R0900_P2_QSYMB 0xf203 +#define F0900_P2_Q_SYMBOL 0xf20301ff + +/*P2_AGC1CFG*/ +#define R0900_P2_AGC1CFG 0xf204 +#define F0900_P2_DC_FROZEN 0xf2040080 +#define F0900_P2_DC_CORRECT 0xf2040040 +#define F0900_P2_AMM_FROZEN 0xf2040020 +#define F0900_P2_AMM_CORRECT 0xf2040010 +#define F0900_P2_QUAD_FROZEN 0xf2040008 +#define F0900_P2_QUAD_CORRECT 0xf2040004 + +/*P2_AGC1CN*/ +#define R0900_P2_AGC1CN 0xf206 +#define F0900_P2_AGC1_LOCKED 0xf2060080 +#define F0900_P2_AGC1_MINPOWER 0xf2060010 +#define F0900_P2_AGCOUT_FAST 0xf2060008 +#define F0900_P2_AGCIQ_BETA 0xf2060007 + +/*P2_AGC1REF*/ +#define R0900_P2_AGC1REF 0xf207 +#define F0900_P2_AGCIQ_REF 0xf20700ff + +/*P2_IDCCOMP*/ +#define R0900_P2_IDCCOMP 0xf208 +#define F0900_P2_IAVERAGE_ADJ 0xf20801ff + +/*P2_QDCCOMP*/ +#define R0900_P2_QDCCOMP 0xf209 +#define F0900_P2_QAVERAGE_ADJ 0xf20901ff + +/*P2_POWERI*/ +#define R0900_P2_POWERI 0xf20a +#define F0900_P2_POWER_I 0xf20a00ff + +/*P2_POWERQ*/ +#define R0900_P2_POWERQ 0xf20b +#define F0900_P2_POWER_Q 0xf20b00ff + +/*P2_AGC1AMM*/ +#define R0900_P2_AGC1AMM 0xf20c +#define F0900_P2_AMM_VALUE 0xf20c00ff + +/*P2_AGC1QUAD*/ +#define R0900_P2_AGC1QUAD 0xf20d +#define F0900_P2_QUAD_VALUE 0xf20d01ff + +/*P2_AGCIQIN1*/ +#define R0900_P2_AGCIQIN1 0xf20e +#define F0900_P2_AGCIQ_VALUE1 0xf20e00ff + +/*P2_AGCIQIN0*/ +#define R0900_P2_AGCIQIN0 0xf20f +#define F0900_P2_AGCIQ_VALUE0 0xf20f00ff + +/*P2_DEMOD*/ +#define R0900_P2_DEMOD 0xf210 +#define F0900_P2_MANUALS2_ROLLOFF 0xf2100080 +#define F0900_P2_SPECINV_CONTROL 0xf2100030 +#define F0900_P2_FORCE_ENASAMP 0xf2100008 +#define F0900_P2_MANUALSX_ROLLOFF 0xf2100004 +#define F0900_P2_ROLLOFF_CONTROL 0xf2100003 + +/*P2_DMDMODCOD*/ +#define R0900_P2_DMDMODCOD 0xf211 +#define F0900_P2_MANUAL_MODCOD 0xf2110080 +#define F0900_P2_DEMOD_MODCOD 0xf211007c +#define F0900_P2_DEMOD_TYPE 0xf2110003 + +/*P2_DSTATUS*/ +#define R0900_P2_DSTATUS 0xf212 +#define F0900_P2_CAR_LOCK 0xf2120080 +#define F0900_P2_TMGLOCK_QUALITY 0xf2120060 +#define F0900_P2_LOCK_DEFINITIF 0xf2120008 +#define F0900_P2_OVADC_DETECT 0xf2120001 + +/*P2_DSTATUS2*/ +#define R0900_P2_DSTATUS2 0xf213 +#define F0900_P2_DEMOD_DELOCK 0xf2130080 +#define F0900_P2_AGC1_NOSIGNALACK 0xf2130008 +#define F0900_P2_AGC2_OVERFLOW 0xf2130004 +#define F0900_P2_CFR_OVERFLOW 0xf2130002 +#define F0900_P2_GAMMA_OVERUNDER 0xf2130001 + +/*P2_DMDCFGMD*/ +#define R0900_P2_DMDCFGMD 0xf214 +#define F0900_P2_DVBS2_ENABLE 0xf2140080 +#define F0900_P2_DVBS1_ENABLE 0xf2140040 +#define F0900_P2_SCAN_ENABLE 0xf2140010 +#define F0900_P2_CFR_AUTOSCAN 0xf2140008 +#define F0900_P2_TUN_RNG 0xf2140003 + +/*P2_DMDCFG2*/ +#define R0900_P2_DMDCFG2 0xf215 +#define F0900_P2_S1S2_SEQUENTIAL 0xf2150040 +#define F0900_P2_INFINITE_RELOCK 0xf2150010 + +/*P2_DMDISTATE*/ +#define R0900_P2_DMDISTATE 0xf216 +#define F0900_P2_I2C_DEMOD_MODE 0xf216001f + +/*P2_DMDT0M*/ +#define R0900_P2_DMDT0M 0xf217 +#define F0900_P2_DMDT0_MIN 0xf21700ff + +/*P2_DMDSTATE*/ +#define R0900_P2_DMDSTATE 0xf21b +#define F0900_P2_HEADER_MODE 0xf21b0060 + +/*P2_DMDFLYW*/ +#define R0900_P2_DMDFLYW 0xf21c +#define F0900_P2_I2C_IRQVAL 0xf21c00f0 +#define F0900_P2_FLYWHEEL_CPT 0xf21c000f + +/*P2_DSTATUS3*/ +#define R0900_P2_DSTATUS3 0xf21d +#define F0900_P2_DEMOD_CFGMODE 0xf21d0060 + +/*P2_DMDCFG3*/ +#define R0900_P2_DMDCFG3 0xf21e +#define F0900_P2_NOSTOP_FIFOFULL 0xf21e0008 + +/*P2_DMDCFG4*/ +#define R0900_P2_DMDCFG4 0xf21f +#define F0900_P2_TUNER_NRELAUNCH 0xf21f0008 + +/*P2_CORRELMANT*/ +#define R0900_P2_CORRELMANT 0xf220 +#define F0900_P2_CORREL_MANT 0xf22000ff + +/*P2_CORRELABS*/ +#define R0900_P2_CORRELABS 0xf221 +#define F0900_P2_CORREL_ABS 0xf22100ff + +/*P2_CORRELEXP*/ +#define R0900_P2_CORRELEXP 0xf222 +#define F0900_P2_CORREL_ABSEXP 0xf22200f0 +#define F0900_P2_CORREL_EXP 0xf222000f + +/*P2_PLHMODCOD*/ +#define R0900_P2_PLHMODCOD 0xf224 +#define F0900_P2_SPECINV_DEMOD 0xf2240080 +#define F0900_P2_PLH_MODCOD 0xf224007c +#define F0900_P2_PLH_TYPE 0xf2240003 + +/*P2_DMDREG*/ +#define R0900_P2_DMDREG 0xf225 +#define F0900_P2_DECIM_PLFRAMES 0xf2250001 + +/*P2_AGC2O*/ +#define R0900_P2_AGC2O 0xf22c +#define F0900_P2_AGC2_COEF 0xf22c0007 + +/*P2_AGC2REF*/ +#define R0900_P2_AGC2REF 0xf22d +#define F0900_P2_AGC2_REF 0xf22d00ff + +/*P2_AGC1ADJ*/ +#define R0900_P2_AGC1ADJ 0xf22e +#define F0900_P2_AGC1_ADJUSTED 0xf22e007f + +/*P2_AGC2I1*/ +#define R0900_P2_AGC2I1 0xf236 +#define F0900_P2_AGC2_INTEGRATOR1 0xf23600ff + +/*P2_AGC2I0*/ +#define R0900_P2_AGC2I0 0xf237 +#define F0900_P2_AGC2_INTEGRATOR0 0xf23700ff + +/*P2_CARCFG*/ +#define R0900_P2_CARCFG 0xf238 +#define F0900_P2_CFRUPLOW_AUTO 0xf2380080 +#define F0900_P2_CFRUPLOW_TEST 0xf2380040 +#define F0900_P2_ROTAON 0xf2380004 +#define F0900_P2_PH_DET_ALGO 0xf2380003 + +/*P2_ACLC*/ +#define R0900_P2_ACLC 0xf239 +#define F0900_P2_CAR_ALPHA_MANT 0xf2390030 +#define F0900_P2_CAR_ALPHA_EXP 0xf239000f + +/*P2_BCLC*/ +#define R0900_P2_BCLC 0xf23a +#define F0900_P2_CAR_BETA_MANT 0xf23a0030 +#define F0900_P2_CAR_BETA_EXP 0xf23a000f + +/*P2_CARFREQ*/ +#define R0900_P2_CARFREQ 0xf23d +#define F0900_P2_KC_COARSE_EXP 0xf23d00f0 +#define F0900_P2_BETA_FREQ 0xf23d000f + +/*P2_CARHDR*/ +#define R0900_P2_CARHDR 0xf23e +#define F0900_P2_K_FREQ_HDR 0xf23e00ff + +/*P2_LDT*/ +#define R0900_P2_LDT 0xf23f +#define F0900_P2_CARLOCK_THRES 0xf23f01ff + +/*P2_LDT2*/ +#define R0900_P2_LDT2 0xf240 +#define F0900_P2_CARLOCK_THRES2 0xf24001ff + +/*P2_CFRICFG*/ +#define R0900_P2_CFRICFG 0xf241 +#define F0900_P2_NEG_CFRSTEP 0xf2410001 + +/*P2_CFRUP1*/ +#define R0900_P2_CFRUP1 0xf242 +#define F0900_P2_CFR_UP1 0xf24201ff + +/*P2_CFRUP0*/ +#define R0900_P2_CFRUP0 0xf243 +#define F0900_P2_CFR_UP0 0xf24300ff + +/*P2_CFRLOW1*/ +#define R0900_P2_CFRLOW1 0xf246 +#define F0900_P2_CFR_LOW1 0xf24601ff + +/*P2_CFRLOW0*/ +#define R0900_P2_CFRLOW0 0xf247 +#define F0900_P2_CFR_LOW0 0xf24700ff + +/*P2_CFRINIT1*/ +#define R0900_P2_CFRINIT1 0xf248 +#define F0900_P2_CFR_INIT1 0xf24801ff + +/*P2_CFRINIT0*/ +#define R0900_P2_CFRINIT0 0xf249 +#define F0900_P2_CFR_INIT0 0xf24900ff + +/*P2_CFRINC1*/ +#define R0900_P2_CFRINC1 0xf24a +#define F0900_P2_MANUAL_CFRINC 0xf24a0080 +#define F0900_P2_CFR_INC1 0xf24a003f + +/*P2_CFRINC0*/ +#define R0900_P2_CFRINC0 0xf24b +#define F0900_P2_CFR_INC0 0xf24b00f8 + +/*P2_CFR2*/ +#define R0900_P2_CFR2 0xf24c +#define F0900_P2_CAR_FREQ2 0xf24c01ff + +/*P2_CFR1*/ +#define R0900_P2_CFR1 0xf24d +#define F0900_P2_CAR_FREQ1 0xf24d00ff + +/*P2_CFR0*/ +#define R0900_P2_CFR0 0xf24e +#define F0900_P2_CAR_FREQ0 0xf24e00ff + +/*P2_LDI*/ +#define R0900_P2_LDI 0xf24f +#define F0900_P2_LOCK_DET_INTEGR 0xf24f01ff + +/*P2_TMGCFG*/ +#define R0900_P2_TMGCFG 0xf250 +#define F0900_P2_TMGLOCK_BETA 0xf25000c0 +#define F0900_P2_DO_TIMING_CORR 0xf2500010 +#define F0900_P2_TMG_MINFREQ 0xf2500003 + +/*P2_RTC*/ +#define R0900_P2_RTC 0xf251 +#define F0900_P2_TMGALPHA_EXP 0xf25100f0 +#define F0900_P2_TMGBETA_EXP 0xf251000f + +/*P2_RTCS2*/ +#define R0900_P2_RTCS2 0xf252 +#define F0900_P2_TMGALPHAS2_EXP 0xf25200f0 +#define F0900_P2_TMGBETAS2_EXP 0xf252000f + +/*P2_TMGTHRISE*/ +#define R0900_P2_TMGTHRISE 0xf253 +#define F0900_P2_TMGLOCK_THRISE 0xf25300ff + +/*P2_TMGTHFALL*/ +#define R0900_P2_TMGTHFALL 0xf254 +#define F0900_P2_TMGLOCK_THFALL 0xf25400ff + +/*P2_SFRUPRATIO*/ +#define R0900_P2_SFRUPRATIO 0xf255 +#define F0900_P2_SFR_UPRATIO 0xf25500ff + +/*P2_SFRLOWRATIO*/ +#define R0900_P2_SFRLOWRATIO 0xf256 +#define F0900_P2_SFR_LOWRATIO 0xf25600ff + +/*P2_KREFTMG*/ +#define R0900_P2_KREFTMG 0xf258 +#define F0900_P2_KREF_TMG 0xf25800ff + +/*P2_SFRSTEP*/ +#define R0900_P2_SFRSTEP 0xf259 +#define F0900_P2_SFR_SCANSTEP 0xf25900f0 +#define F0900_P2_SFR_CENTERSTEP 0xf259000f + +/*P2_TMGCFG2*/ +#define R0900_P2_TMGCFG2 0xf25a +#define F0900_P2_SFRRATIO_FINE 0xf25a0001 + +/*P2_KREFTMG2*/ +#define R0900_P2_KREFTMG2 0xf25b +#define F0900_P2_KREF_TMG2 0xf25b00ff + +/*P2_SFRINIT1*/ +#define R0900_P2_SFRINIT1 0xf25e +#define F0900_P2_SFR_INIT1 0xf25e007f + +/*P2_SFRINIT0*/ +#define R0900_P2_SFRINIT0 0xf25f +#define F0900_P2_SFR_INIT0 0xf25f00ff + +/*P2_SFRUP1*/ +#define R0900_P2_SFRUP1 0xf260 +#define F0900_P2_AUTO_GUP 0xf2600080 +#define F0900_P2_SYMB_FREQ_UP1 0xf260007f + +/*P2_SFRUP0*/ +#define R0900_P2_SFRUP0 0xf261 +#define F0900_P2_SYMB_FREQ_UP0 0xf26100ff + +/*P2_SFRLOW1*/ +#define R0900_P2_SFRLOW1 0xf262 +#define F0900_P2_AUTO_GLOW 0xf2620080 +#define F0900_P2_SYMB_FREQ_LOW1 0xf262007f + +/*P2_SFRLOW0*/ +#define R0900_P2_SFRLOW0 0xf263 +#define F0900_P2_SYMB_FREQ_LOW0 0xf26300ff + +/*P2_SFR3*/ +#define R0900_P2_SFR3 0xf264 +#define F0900_P2_SYMB_FREQ3 0xf26400ff + +/*P2_SFR2*/ +#define R0900_P2_SFR2 0xf265 +#define F0900_P2_SYMB_FREQ2 0xf26500ff + +/*P2_SFR1*/ +#define R0900_P2_SFR1 0xf266 +#define F0900_P2_SYMB_FREQ1 0xf26600ff + +/*P2_SFR0*/ +#define R0900_P2_SFR0 0xf267 +#define F0900_P2_SYMB_FREQ0 0xf26700ff + +/*P2_TMGREG2*/ +#define R0900_P2_TMGREG2 0xf268 +#define F0900_P2_TMGREG2 0xf26800ff + +/*P2_TMGREG1*/ +#define R0900_P2_TMGREG1 0xf269 +#define F0900_P2_TMGREG1 0xf26900ff + +/*P2_TMGREG0*/ +#define R0900_P2_TMGREG0 0xf26a +#define F0900_P2_TMGREG0 0xf26a00ff + +/*P2_TMGLOCK1*/ +#define R0900_P2_TMGLOCK1 0xf26b +#define F0900_P2_TMGLOCK_LEVEL1 0xf26b01ff + +/*P2_TMGLOCK0*/ +#define R0900_P2_TMGLOCK0 0xf26c +#define F0900_P2_TMGLOCK_LEVEL0 0xf26c00ff + +/*P2_TMGOBS*/ +#define R0900_P2_TMGOBS 0xf26d +#define F0900_P2_ROLLOFF_STATUS 0xf26d00c0 + +/*P2_EQUALCFG*/ +#define R0900_P2_EQUALCFG 0xf26f +#define F0900_P2_EQUAL_ON 0xf26f0040 +#define F0900_P2_MU_EQUALDFE 0xf26f0007 + +/*P2_EQUAI1*/ +#define R0900_P2_EQUAI1 0xf270 +#define F0900_P2_EQUA_ACCI1 0xf27001ff + +/*P2_EQUAQ1*/ +#define R0900_P2_EQUAQ1 0xf271 +#define F0900_P2_EQUA_ACCQ1 0xf27101ff + +/*P2_EQUAI2*/ +#define R0900_P2_EQUAI2 0xf272 +#define F0900_P2_EQUA_ACCI2 0xf27201ff + +/*P2_EQUAQ2*/ +#define R0900_P2_EQUAQ2 0xf273 +#define F0900_P2_EQUA_ACCQ2 0xf27301ff + +/*P2_EQUAI3*/ +#define R0900_P2_EQUAI3 0xf274 +#define F0900_P2_EQUA_ACCI3 0xf27401ff + +/*P2_EQUAQ3*/ +#define R0900_P2_EQUAQ3 0xf275 +#define F0900_P2_EQUA_ACCQ3 0xf27501ff + +/*P2_EQUAI4*/ +#define R0900_P2_EQUAI4 0xf276 +#define F0900_P2_EQUA_ACCI4 0xf27601ff + +/*P2_EQUAQ4*/ +#define R0900_P2_EQUAQ4 0xf277 +#define F0900_P2_EQUA_ACCQ4 0xf27701ff + +/*P2_EQUAI5*/ +#define R0900_P2_EQUAI5 0xf278 +#define F0900_P2_EQUA_ACCI5 0xf27801ff + +/*P2_EQUAQ5*/ +#define R0900_P2_EQUAQ5 0xf279 +#define F0900_P2_EQUA_ACCQ5 0xf27901ff + +/*P2_EQUAI6*/ +#define R0900_P2_EQUAI6 0xf27a +#define F0900_P2_EQUA_ACCI6 0xf27a01ff + +/*P2_EQUAQ6*/ +#define R0900_P2_EQUAQ6 0xf27b +#define F0900_P2_EQUA_ACCQ6 0xf27b01ff + +/*P2_EQUAI7*/ +#define R0900_P2_EQUAI7 0xf27c +#define F0900_P2_EQUA_ACCI7 0xf27c01ff + +/*P2_EQUAQ7*/ +#define R0900_P2_EQUAQ7 0xf27d +#define F0900_P2_EQUA_ACCQ7 0xf27d01ff + +/*P2_EQUAI8*/ +#define R0900_P2_EQUAI8 0xf27e +#define F0900_P2_EQUA_ACCI8 0xf27e01ff + +/*P2_EQUAQ8*/ +#define R0900_P2_EQUAQ8 0xf27f +#define F0900_P2_EQUA_ACCQ8 0xf27f01ff + +/*P2_NNOSDATAT1*/ +#define R0900_P2_NNOSDATAT1 0xf280 +#define F0900_P2_NOSDATAT_NORMED1 0xf28000ff + +/*P2_NNOSDATAT0*/ +#define R0900_P2_NNOSDATAT0 0xf281 +#define F0900_P2_NOSDATAT_NORMED0 0xf28100ff + +/*P2_NNOSDATA1*/ +#define R0900_P2_NNOSDATA1 0xf282 +#define F0900_P2_NOSDATA_NORMED1 0xf28200ff + +/*P2_NNOSDATA0*/ +#define R0900_P2_NNOSDATA0 0xf283 +#define F0900_P2_NOSDATA_NORMED0 0xf28300ff + +/*P2_NNOSPLHT1*/ +#define R0900_P2_NNOSPLHT1 0xf284 +#define F0900_P2_NOSPLHT_NORMED1 0xf28400ff + +/*P2_NNOSPLHT0*/ +#define R0900_P2_NNOSPLHT0 0xf285 +#define F0900_P2_NOSPLHT_NORMED0 0xf28500ff + +/*P2_NNOSPLH1*/ +#define R0900_P2_NNOSPLH1 0xf286 +#define F0900_P2_NOSPLH_NORMED1 0xf28600ff + +/*P2_NNOSPLH0*/ +#define R0900_P2_NNOSPLH0 0xf287 +#define F0900_P2_NOSPLH_NORMED0 0xf28700ff + +/*P2_NOSDATAT1*/ +#define R0900_P2_NOSDATAT1 0xf288 +#define F0900_P2_NOSDATAT_UNNORMED1 0xf28800ff + +/*P2_NOSDATAT0*/ +#define R0900_P2_NOSDATAT0 0xf289 +#define F0900_P2_NOSDATAT_UNNORMED0 0xf28900ff + +/*P2_NOSDATA1*/ +#define R0900_P2_NOSDATA1 0xf28a +#define F0900_P2_NOSDATA_UNNORMED1 0xf28a00ff + +/*P2_NOSDATA0*/ +#define R0900_P2_NOSDATA0 0xf28b +#define F0900_P2_NOSDATA_UNNORMED0 0xf28b00ff + +/*P2_NOSPLHT1*/ +#define R0900_P2_NOSPLHT1 0xf28c +#define F0900_P2_NOSPLHT_UNNORMED1 0xf28c00ff + +/*P2_NOSPLHT0*/ +#define R0900_P2_NOSPLHT0 0xf28d +#define F0900_P2_NOSPLHT_UNNORMED0 0xf28d00ff + +/*P2_NOSPLH1*/ +#define R0900_P2_NOSPLH1 0xf28e +#define F0900_P2_NOSPLH_UNNORMED1 0xf28e00ff + +/*P2_NOSPLH0*/ +#define R0900_P2_NOSPLH0 0xf28f +#define F0900_P2_NOSPLH_UNNORMED0 0xf28f00ff + +/*P2_CAR2CFG*/ +#define R0900_P2_CAR2CFG 0xf290 +#define F0900_P2_CARRIER3_DISABLE 0xf2900040 +#define F0900_P2_ROTA2ON 0xf2900004 +#define F0900_P2_PH_DET_ALGO2 0xf2900003 + +/*P2_CFR2CFR1*/ +#define R0900_P2_CFR2CFR1 0xf291 +#define F0900_P2_CFR2TOCFR1_DVBS1 0xf29100c0 +#define F0900_P2_EN_S2CAR2CENTER 0xf2910020 +#define F0900_P2_DIS_BCHERRCFR2 0xf2910010 +#define F0900_P2_CFR2TOCFR1_BETA 0xf2910007 + +/*P2_CFR22*/ +#define R0900_P2_CFR22 0xf293 +#define F0900_P2_CAR2_FREQ2 0xf29301ff + +/*P2_CFR21*/ +#define R0900_P2_CFR21 0xf294 +#define F0900_P2_CAR2_FREQ1 0xf29400ff + +/*P2_CFR20*/ +#define R0900_P2_CFR20 0xf295 +#define F0900_P2_CAR2_FREQ0 0xf29500ff + +/*P2_ACLC2S2Q*/ +#define R0900_P2_ACLC2S2Q 0xf297 +#define F0900_P2_ENAB_SPSKSYMB 0xf2970080 +#define F0900_P2_CAR2S2_Q_ALPH_M 0xf2970030 +#define F0900_P2_CAR2S2_Q_ALPH_E 0xf297000f + +/*P2_ACLC2S28*/ +#define R0900_P2_ACLC2S28 0xf298 +#define F0900_P2_OLDI3Q_MODE 0xf2980080 +#define F0900_P2_CAR2S2_8_ALPH_M 0xf2980030 +#define F0900_P2_CAR2S2_8_ALPH_E 0xf298000f + +/*P2_ACLC2S216A*/ +#define R0900_P2_ACLC2S216A 0xf299 +#define F0900_P2_DIS_C3STOPA2 0xf2990080 +#define F0900_P2_CAR2S2_16ADERAT 0xf2990040 +#define F0900_P2_CAR2S2_16A_ALPH_M 0xf2990030 +#define F0900_P2_CAR2S2_16A_ALPH_E 0xf299000f + +/*P2_ACLC2S232A*/ +#define R0900_P2_ACLC2S232A 0xf29a +#define F0900_P2_CAR2S2_32ADERAT 0xf29a0040 +#define F0900_P2_CAR2S2_32A_ALPH_M 0xf29a0030 +#define F0900_P2_CAR2S2_32A_ALPH_E 0xf29a000f + +/*P2_BCLC2S2Q*/ +#define R0900_P2_BCLC2S2Q 0xf29c +#define F0900_P2_CAR2S2_Q_BETA_M 0xf29c0030 +#define F0900_P2_CAR2S2_Q_BETA_E 0xf29c000f + +/*P2_BCLC2S28*/ +#define R0900_P2_BCLC2S28 0xf29d +#define F0900_P2_CAR2S2_8_BETA_M 0xf29d0030 +#define F0900_P2_CAR2S2_8_BETA_E 0xf29d000f + +/*P2_BCLC2S216A*/ +#define R0900_P2_BCLC2S216A 0xf29e + +/*P2_BCLC2S232A*/ +#define R0900_P2_BCLC2S232A 0xf29f + +/*P2_PLROOT2*/ +#define R0900_P2_PLROOT2 0xf2ac +#define F0900_P2_PLSCRAMB_MODE 0xf2ac000c +#define F0900_P2_PLSCRAMB_ROOT2 0xf2ac0003 + +/*P2_PLROOT1*/ +#define R0900_P2_PLROOT1 0xf2ad +#define F0900_P2_PLSCRAMB_ROOT1 0xf2ad00ff + +/*P2_PLROOT0*/ +#define R0900_P2_PLROOT0 0xf2ae +#define F0900_P2_PLSCRAMB_ROOT0 0xf2ae00ff + +/*P2_MODCODLST0*/ +#define R0900_P2_MODCODLST0 0xf2b0 + +/*P2_MODCODLST1*/ +#define R0900_P2_MODCODLST1 0xf2b1 +#define F0900_P2_DIS_MODCOD29 0xf2b100f0 +#define F0900_P2_DIS_32PSK_9_10 0xf2b1000f + +/*P2_MODCODLST2*/ +#define R0900_P2_MODCODLST2 0xf2b2 +#define F0900_P2_DIS_32PSK_8_9 0xf2b200f0 +#define F0900_P2_DIS_32PSK_5_6 0xf2b2000f + +/*P2_MODCODLST3*/ +#define R0900_P2_MODCODLST3 0xf2b3 +#define F0900_P2_DIS_32PSK_4_5 0xf2b300f0 +#define F0900_P2_DIS_32PSK_3_4 0xf2b3000f + +/*P2_MODCODLST4*/ +#define R0900_P2_MODCODLST4 0xf2b4 +#define F0900_P2_DIS_16PSK_9_10 0xf2b400f0 +#define F0900_P2_DIS_16PSK_8_9 0xf2b4000f + +/*P2_MODCODLST5*/ +#define R0900_P2_MODCODLST5 0xf2b5 +#define F0900_P2_DIS_16PSK_5_6 0xf2b500f0 +#define F0900_P2_DIS_16PSK_4_5 0xf2b5000f + +/*P2_MODCODLST6*/ +#define R0900_P2_MODCODLST6 0xf2b6 +#define F0900_P2_DIS_16PSK_3_4 0xf2b600f0 +#define F0900_P2_DIS_16PSK_2_3 0xf2b6000f + +/*P2_MODCODLST7*/ +#define R0900_P2_MODCODLST7 0xf2b7 +#define F0900_P2_DIS_8P_9_10 0xf2b700f0 +#define F0900_P2_DIS_8P_8_9 0xf2b7000f + +/*P2_MODCODLST8*/ +#define R0900_P2_MODCODLST8 0xf2b8 +#define F0900_P2_DIS_8P_5_6 0xf2b800f0 +#define F0900_P2_DIS_8P_3_4 0xf2b8000f + +/*P2_MODCODLST9*/ +#define R0900_P2_MODCODLST9 0xf2b9 +#define F0900_P2_DIS_8P_2_3 0xf2b900f0 +#define F0900_P2_DIS_8P_3_5 0xf2b9000f + +/*P2_MODCODLSTA*/ +#define R0900_P2_MODCODLSTA 0xf2ba +#define F0900_P2_DIS_QP_9_10 0xf2ba00f0 +#define F0900_P2_DIS_QP_8_9 0xf2ba000f + +/*P2_MODCODLSTB*/ +#define R0900_P2_MODCODLSTB 0xf2bb +#define F0900_P2_DIS_QP_5_6 0xf2bb00f0 +#define F0900_P2_DIS_QP_4_5 0xf2bb000f + +/*P2_MODCODLSTC*/ +#define R0900_P2_MODCODLSTC 0xf2bc +#define F0900_P2_DIS_QP_3_4 0xf2bc00f0 +#define F0900_P2_DIS_QP_2_3 0xf2bc000f + +/*P2_MODCODLSTD*/ +#define R0900_P2_MODCODLSTD 0xf2bd +#define F0900_P2_DIS_QP_3_5 0xf2bd00f0 +#define F0900_P2_DIS_QP_1_2 0xf2bd000f + +/*P2_MODCODLSTE*/ +#define R0900_P2_MODCODLSTE 0xf2be +#define F0900_P2_DIS_QP_2_5 0xf2be00f0 +#define F0900_P2_DIS_QP_1_3 0xf2be000f + +/*P2_MODCODLSTF*/ +#define R0900_P2_MODCODLSTF 0xf2bf +#define F0900_P2_DIS_QP_1_4 0xf2bf00f0 + +/*P2_GAUSSR0*/ +#define R0900_P2_GAUSSR0 0xf2c0 +#define F0900_P2_EN_CCIMODE 0xf2c00080 +#define F0900_P2_R0_GAUSSIEN 0xf2c0007f + +/*P2_CCIR0*/ +#define R0900_P2_CCIR0 0xf2c1 +#define F0900_P2_CCIDETECT_PLHONLY 0xf2c10080 +#define F0900_P2_R0_CCI 0xf2c1007f + +/*P2_CCIQUANT*/ +#define R0900_P2_CCIQUANT 0xf2c2 +#define F0900_P2_CCI_BETA 0xf2c200e0 +#define F0900_P2_CCI_QUANT 0xf2c2001f + +/*P2_CCITHRES*/ +#define R0900_P2_CCITHRES 0xf2c3 +#define F0900_P2_CCI_THRESHOLD 0xf2c300ff + +/*P2_CCIACC*/ +#define R0900_P2_CCIACC 0xf2c4 +#define F0900_P2_CCI_VALUE 0xf2c400ff + +/*P2_DMDRESCFG*/ +#define R0900_P2_DMDRESCFG 0xf2c6 +#define F0900_P2_DMDRES_RESET 0xf2c60080 +#define F0900_P2_DMDRES_STRALL 0xf2c60008 +#define F0900_P2_DMDRES_NEWONLY 0xf2c60004 +#define F0900_P2_DMDRES_NOSTORE 0xf2c60002 + +/*P2_DMDRESADR*/ +#define R0900_P2_DMDRESADR 0xf2c7 +#define F0900_P2_DMDRES_VALIDCFR 0xf2c70040 +#define F0900_P2_DMDRES_MEMFULL 0xf2c70030 +#define F0900_P2_DMDRES_RESNBR 0xf2c7000f + +/*P2_DMDRESDATA7*/ +#define R0900_P2_DMDRESDATA7 0xf2c8 +#define F0900_P2_DMDRES_DATA7 0xf2c800ff + +/*P2_DMDRESDATA6*/ +#define R0900_P2_DMDRESDATA6 0xf2c9 +#define F0900_P2_DMDRES_DATA6 0xf2c900ff + +/*P2_DMDRESDATA5*/ +#define R0900_P2_DMDRESDATA5 0xf2ca +#define F0900_P2_DMDRES_DATA5 0xf2ca00ff + +/*P2_DMDRESDATA4*/ +#define R0900_P2_DMDRESDATA4 0xf2cb +#define F0900_P2_DMDRES_DATA4 0xf2cb00ff + +/*P2_DMDRESDATA3*/ +#define R0900_P2_DMDRESDATA3 0xf2cc +#define F0900_P2_DMDRES_DATA3 0xf2cc00ff + +/*P2_DMDRESDATA2*/ +#define R0900_P2_DMDRESDATA2 0xf2cd +#define F0900_P2_DMDRES_DATA2 0xf2cd00ff + +/*P2_DMDRESDATA1*/ +#define R0900_P2_DMDRESDATA1 0xf2ce +#define F0900_P2_DMDRES_DATA1 0xf2ce00ff + +/*P2_DMDRESDATA0*/ +#define R0900_P2_DMDRESDATA0 0xf2cf +#define F0900_P2_DMDRES_DATA0 0xf2cf00ff + +/*P2_FFEI1*/ +#define R0900_P2_FFEI1 0xf2d0 +#define F0900_P2_FFE_ACCI1 0xf2d001ff + +/*P2_FFEQ1*/ +#define R0900_P2_FFEQ1 0xf2d1 +#define F0900_P2_FFE_ACCQ1 0xf2d101ff + +/*P2_FFEI2*/ +#define R0900_P2_FFEI2 0xf2d2 +#define F0900_P2_FFE_ACCI2 0xf2d201ff + +/*P2_FFEQ2*/ +#define R0900_P2_FFEQ2 0xf2d3 +#define F0900_P2_FFE_ACCQ2 0xf2d301ff + +/*P2_FFEI3*/ +#define R0900_P2_FFEI3 0xf2d4 +#define F0900_P2_FFE_ACCI3 0xf2d401ff + +/*P2_FFEQ3*/ +#define R0900_P2_FFEQ3 0xf2d5 +#define F0900_P2_FFE_ACCQ3 0xf2d501ff + +/*P2_FFEI4*/ +#define R0900_P2_FFEI4 0xf2d6 +#define F0900_P2_FFE_ACCI4 0xf2d601ff + +/*P2_FFEQ4*/ +#define R0900_P2_FFEQ4 0xf2d7 +#define F0900_P2_FFE_ACCQ4 0xf2d701ff + +/*P2_FFECFG*/ +#define R0900_P2_FFECFG 0xf2d8 +#define F0900_P2_EQUALFFE_ON 0xf2d80040 +#define F0900_P2_MU_EQUALFFE 0xf2d80007 + +/*P2_TNRCFG*/ +#define R0900_P2_TNRCFG 0xf2e0 +#define F0900_P2_TUN_ACKFAIL 0xf2e00080 +#define F0900_P2_TUN_TYPE 0xf2e00070 +#define F0900_P2_TUN_SECSTOP 0xf2e00008 +#define F0900_P2_TUN_VCOSRCH 0xf2e00004 +#define F0900_P2_TUN_MADDRESS 0xf2e00003 + +/*P2_TNRCFG2*/ +#define R0900_P2_TNRCFG2 0xf2e1 +#define F0900_P2_TUN_IQSWAP 0xf2e10080 +#define F0900_P2_DIS_BWCALC 0xf2e10004 +#define F0900_P2_SHORT_WAITSTATES 0xf2e10002 + +/*P2_TNRXTAL*/ +#define R0900_P2_TNRXTAL 0xf2e4 +#define F0900_P2_TUN_XTALFREQ 0xf2e4001f + +/*P2_TNRSTEPS*/ +#define R0900_P2_TNRSTEPS 0xf2e7 +#define F0900_P2_TUNER_BW0P125 0xf2e70080 +#define F0900_P2_BWINC_OFFSET 0xf2e70170 +#define F0900_P2_SOFTSTEP_RNG 0xf2e70008 +#define F0900_P2_TUN_BWOFFSET 0xf2e70007 + +/*P2_TNRGAIN*/ +#define R0900_P2_TNRGAIN 0xf2e8 +#define F0900_P2_TUN_KDIVEN 0xf2e800c0 +#define F0900_P2_STB6X00_OCK 0xf2e80030 +#define F0900_P2_TUN_GAIN 0xf2e8000f + +/*P2_TNRRF1*/ +#define R0900_P2_TNRRF1 0xf2e9 +#define F0900_P2_TUN_RFFREQ2 0xf2e900ff + +/*P2_TNRRF0*/ +#define R0900_P2_TNRRF0 0xf2ea +#define F0900_P2_TUN_RFFREQ1 0xf2ea00ff + +/*P2_TNRBW*/ +#define R0900_P2_TNRBW 0xf2eb +#define F0900_P2_TUN_RFFREQ0 0xf2eb00c0 +#define F0900_P2_TUN_BW 0xf2eb003f + +/*P2_TNRADJ*/ +#define R0900_P2_TNRADJ 0xf2ec +#define F0900_P2_STB61X0_CALTIME 0xf2ec0040 + +/*P2_TNRCTL2*/ +#define R0900_P2_TNRCTL2 0xf2ed +#define F0900_P2_STB61X0_RCCKOFF 0xf2ed0080 +#define F0900_P2_STB61X0_ICP_SDOFF 0xf2ed0040 +#define F0900_P2_STB61X0_DCLOOPOFF 0xf2ed0020 +#define F0900_P2_STB61X0_REFOUTSEL 0xf2ed0010 +#define F0900_P2_STB61X0_CALOFF 0xf2ed0008 +#define F0900_P2_STB6XX0_LPT_BEN 0xf2ed0004 +#define F0900_P2_STB6XX0_RX_OSCP 0xf2ed0002 +#define F0900_P2_STB6XX0_SYN 0xf2ed0001 + +/*P2_TNRCFG3*/ +#define R0900_P2_TNRCFG3 0xf2ee +#define F0900_P2_TUN_PLLFREQ 0xf2ee001c +#define F0900_P2_TUN_I2CFREQ_MODE 0xf2ee0003 + +/*P2_TNRLAUNCH*/ +#define R0900_P2_TNRLAUNCH 0xf2f0 + +/*P2_TNRLD*/ +#define R0900_P2_TNRLD 0xf2f0 +#define F0900_P2_TUNLD_VCOING 0xf2f00080 +#define F0900_P2_TUN_REG1FAIL 0xf2f00040 +#define F0900_P2_TUN_REG2FAIL 0xf2f00020 +#define F0900_P2_TUN_REG3FAIL 0xf2f00010 +#define F0900_P2_TUN_REG4FAIL 0xf2f00008 +#define F0900_P2_TUN_REG5FAIL 0xf2f00004 +#define F0900_P2_TUN_BWING 0xf2f00002 +#define F0900_P2_TUN_LOCKED 0xf2f00001 + +/*P2_TNROBSL*/ +#define R0900_P2_TNROBSL 0xf2f6 +#define F0900_P2_TUN_I2CABORTED 0xf2f60080 +#define F0900_P2_TUN_LPEN 0xf2f60040 +#define F0900_P2_TUN_FCCK 0xf2f60020 +#define F0900_P2_TUN_I2CLOCKED 0xf2f60010 +#define F0900_P2_TUN_PROGDONE 0xf2f6000c +#define F0900_P2_TUN_RFRESTE1 0xf2f60003 + +/*P2_TNRRESTE*/ +#define R0900_P2_TNRRESTE 0xf2f7 +#define F0900_P2_TUN_RFRESTE0 0xf2f700ff + +/*P2_SMAPCOEF7*/ +#define R0900_P2_SMAPCOEF7 0xf300 +#define F0900_P2_DIS_QSCALE 0xf3000080 +#define F0900_P2_SMAPCOEF_Q_LLR12 0xf300017f + +/*P2_SMAPCOEF6*/ +#define R0900_P2_SMAPCOEF6 0xf301 +#define F0900_P2_ADJ_8PSKLLR1 0xf3010004 +#define F0900_P2_OLD_8PSKLLR1 0xf3010002 +#define F0900_P2_DIS_AB8PSK 0xf3010001 + +/*P2_SMAPCOEF5*/ +#define R0900_P2_SMAPCOEF5 0xf302 +#define F0900_P2_DIS_8SCALE 0xf3020080 +#define F0900_P2_SMAPCOEF_8P_LLR23 0xf302017f + +/*P2_NCO2MAX1*/ +#define R0900_P2_NCO2MAX1 0xf314 +#define F0900_P2_TETA2_MAXVABS1 0xf31400ff + +/*P2_NCO2MAX0*/ +#define R0900_P2_NCO2MAX0 0xf315 +#define F0900_P2_TETA2_MAXVABS0 0xf31500ff + +/*P2_NCO2FR1*/ +#define R0900_P2_NCO2FR1 0xf316 +#define F0900_P2_NCO2FINAL_ANGLE1 0xf31600ff + +/*P2_NCO2FR0*/ +#define R0900_P2_NCO2FR0 0xf317 +#define F0900_P2_NCO2FINAL_ANGLE0 0xf31700ff + +/*P2_CFR2AVRGE1*/ +#define R0900_P2_CFR2AVRGE1 0xf318 +#define F0900_P2_I2C_CFR2AVERAGE1 0xf31800ff + +/*P2_CFR2AVRGE0*/ +#define R0900_P2_CFR2AVRGE0 0xf319 +#define F0900_P2_I2C_CFR2AVERAGE0 0xf31900ff + +/*P2_DMDPLHSTAT*/ +#define R0900_P2_DMDPLHSTAT 0xf320 +#define F0900_P2_PLH_STATISTIC 0xf32000ff + +/*P2_LOCKTIME3*/ +#define R0900_P2_LOCKTIME3 0xf322 +#define F0900_P2_DEMOD_LOCKTIME3 0xf32200ff + +/*P2_LOCKTIME2*/ +#define R0900_P2_LOCKTIME2 0xf323 +#define F0900_P2_DEMOD_LOCKTIME2 0xf32300ff + +/*P2_LOCKTIME1*/ +#define R0900_P2_LOCKTIME1 0xf324 +#define F0900_P2_DEMOD_LOCKTIME1 0xf32400ff + +/*P2_LOCKTIME0*/ +#define R0900_P2_LOCKTIME0 0xf325 +#define F0900_P2_DEMOD_LOCKTIME0 0xf32500ff + +/*P2_VITSCALE*/ +#define R0900_P2_VITSCALE 0xf332 +#define F0900_P2_NVTH_NOSRANGE 0xf3320080 +#define F0900_P2_VERROR_MAXMODE 0xf3320040 +#define F0900_P2_NSLOWSN_LOCKED 0xf3320008 +#define F0900_P2_DIS_RSFLOCK 0xf3320002 + +/*P2_FECM*/ +#define R0900_P2_FECM 0xf333 +#define F0900_P2_DSS_DVB 0xf3330080 +#define F0900_P2_DSS_SRCH 0xf3330010 +#define F0900_P2_SYNCVIT 0xf3330002 +#define F0900_P2_IQINV 0xf3330001 + +/*P2_VTH12*/ +#define R0900_P2_VTH12 0xf334 +#define F0900_P2_VTH12 0xf33400ff + +/*P2_VTH23*/ +#define R0900_P2_VTH23 0xf335 +#define F0900_P2_VTH23 0xf33500ff + +/*P2_VTH34*/ +#define R0900_P2_VTH34 0xf336 +#define F0900_P2_VTH34 0xf33600ff + +/*P2_VTH56*/ +#define R0900_P2_VTH56 0xf337 +#define F0900_P2_VTH56 0xf33700ff + +/*P2_VTH67*/ +#define R0900_P2_VTH67 0xf338 +#define F0900_P2_VTH67 0xf33800ff + +/*P2_VTH78*/ +#define R0900_P2_VTH78 0xf339 +#define F0900_P2_VTH78 0xf33900ff + +/*P2_VITCURPUN*/ +#define R0900_P2_VITCURPUN 0xf33a +#define F0900_P2_VIT_CURPUN 0xf33a001f + +/*P2_VERROR*/ +#define R0900_P2_VERROR 0xf33b +#define F0900_P2_REGERR_VIT 0xf33b00ff + +/*P2_PRVIT*/ +#define R0900_P2_PRVIT 0xf33c +#define F0900_P2_DIS_VTHLOCK 0xf33c0040 +#define F0900_P2_E7_8VIT 0xf33c0020 +#define F0900_P2_E6_7VIT 0xf33c0010 +#define F0900_P2_E5_6VIT 0xf33c0008 +#define F0900_P2_E3_4VIT 0xf33c0004 +#define F0900_P2_E2_3VIT 0xf33c0002 +#define F0900_P2_E1_2VIT 0xf33c0001 + +/*P2_VAVSRVIT*/ +#define R0900_P2_VAVSRVIT 0xf33d +#define F0900_P2_AMVIT 0xf33d0080 +#define F0900_P2_FROZENVIT 0xf33d0040 +#define F0900_P2_SNVIT 0xf33d0030 +#define F0900_P2_TOVVIT 0xf33d000c +#define F0900_P2_HYPVIT 0xf33d0003 + +/*P2_VSTATUSVIT*/ +#define R0900_P2_VSTATUSVIT 0xf33e +#define F0900_P2_PRFVIT 0xf33e0010 +#define F0900_P2_LOCKEDVIT 0xf33e0008 + +/*P2_VTHINUSE*/ +#define R0900_P2_VTHINUSE 0xf33f +#define F0900_P2_VIT_INUSE 0xf33f00ff + +/*P2_KDIV12*/ +#define R0900_P2_KDIV12 0xf340 +#define F0900_P2_K_DIVIDER_12 0xf340007f + +/*P2_KDIV23*/ +#define R0900_P2_KDIV23 0xf341 +#define F0900_P2_K_DIVIDER_23 0xf341007f + +/*P2_KDIV34*/ +#define R0900_P2_KDIV34 0xf342 +#define F0900_P2_K_DIVIDER_34 0xf342007f + +/*P2_KDIV56*/ +#define R0900_P2_KDIV56 0xf343 +#define F0900_P2_K_DIVIDER_56 0xf343007f + +/*P2_KDIV67*/ +#define R0900_P2_KDIV67 0xf344 +#define F0900_P2_K_DIVIDER_67 0xf344007f + +/*P2_KDIV78*/ +#define R0900_P2_KDIV78 0xf345 +#define F0900_P2_K_DIVIDER_78 0xf345007f + +/*P2_PDELCTRL1*/ +#define R0900_P2_PDELCTRL1 0xf350 +#define F0900_P2_INV_MISMASK 0xf3500080 +#define F0900_P2_FILTER_EN 0xf3500020 +#define F0900_P2_EN_MIS00 0xf3500002 +#define F0900_P2_ALGOSWRST 0xf3500001 + +/*P2_PDELCTRL2*/ +#define R0900_P2_PDELCTRL2 0xf351 +#define F0900_P2_RESET_UPKO_COUNT 0xf3510040 +#define F0900_P2_FRAME_MODE 0xf3510002 +#define F0900_P2_NOBCHERRFLG_USE 0xf3510001 + +/*P2_HYSTTHRESH*/ +#define R0900_P2_HYSTTHRESH 0xf354 +#define F0900_P2_UNLCK_THRESH 0xf35400f0 +#define F0900_P2_DELIN_LCK_THRESH 0xf354000f + +/*P2_ISIENTRY*/ +#define R0900_P2_ISIENTRY 0xf35e +#define F0900_P2_ISI_ENTRY 0xf35e00ff + +/*P2_ISIBITENA*/ +#define R0900_P2_ISIBITENA 0xf35f +#define F0900_P2_ISI_BIT_EN 0xf35f00ff + +/*P2_MATSTR1*/ +#define R0900_P2_MATSTR1 0xf360 +#define F0900_P2_MATYPE_CURRENT1 0xf36000ff + +/*P2_MATSTR0*/ +#define R0900_P2_MATSTR0 0xf361 +#define F0900_P2_MATYPE_CURRENT0 0xf36100ff + +/*P2_UPLSTR1*/ +#define R0900_P2_UPLSTR1 0xf362 +#define F0900_P2_UPL_CURRENT1 0xf36200ff + +/*P2_UPLSTR0*/ +#define R0900_P2_UPLSTR0 0xf363 +#define F0900_P2_UPL_CURRENT0 0xf36300ff + +/*P2_DFLSTR1*/ +#define R0900_P2_DFLSTR1 0xf364 +#define F0900_P2_DFL_CURRENT1 0xf36400ff + +/*P2_DFLSTR0*/ +#define R0900_P2_DFLSTR0 0xf365 +#define F0900_P2_DFL_CURRENT0 0xf36500ff + +/*P2_SYNCSTR*/ +#define R0900_P2_SYNCSTR 0xf366 +#define F0900_P2_SYNC_CURRENT 0xf36600ff + +/*P2_SYNCDSTR1*/ +#define R0900_P2_SYNCDSTR1 0xf367 +#define F0900_P2_SYNCD_CURRENT1 0xf36700ff + +/*P2_SYNCDSTR0*/ +#define R0900_P2_SYNCDSTR0 0xf368 +#define F0900_P2_SYNCD_CURRENT0 0xf36800ff + +/*P2_PDELSTATUS1*/ +#define R0900_P2_PDELSTATUS1 0xf369 +#define F0900_P2_PKTDELIN_DELOCK 0xf3690080 +#define F0900_P2_SYNCDUPDFL_BADDFL 0xf3690040 +#define F0900_P2_CONTINUOUS_STREAM 0xf3690020 +#define F0900_P2_UNACCEPTED_STREAM 0xf3690010 +#define F0900_P2_BCH_ERROR_FLAG 0xf3690008 +#define F0900_P2_PKTDELIN_LOCK 0xf3690002 +#define F0900_P2_FIRST_LOCK 0xf3690001 + +/*P2_PDELSTATUS2*/ +#define R0900_P2_PDELSTATUS2 0xf36a +#define F0900_P2_FRAME_MODCOD 0xf36a007c +#define F0900_P2_FRAME_TYPE 0xf36a0003 + +/*P2_BBFCRCKO1*/ +#define R0900_P2_BBFCRCKO1 0xf36b +#define F0900_P2_BBHCRC_KOCNT1 0xf36b00ff + +/*P2_BBFCRCKO0*/ +#define R0900_P2_BBFCRCKO0 0xf36c +#define F0900_P2_BBHCRC_KOCNT0 0xf36c00ff + +/*P2_UPCRCKO1*/ +#define R0900_P2_UPCRCKO1 0xf36d +#define F0900_P2_PKTCRC_KOCNT1 0xf36d00ff + +/*P2_UPCRCKO0*/ +#define R0900_P2_UPCRCKO0 0xf36e +#define F0900_P2_PKTCRC_KOCNT0 0xf36e00ff + +/*P2_PDELCTRL3*/ +#define R0900_P2_PDELCTRL3 0xf36f +#define F0900_P2_PKTDEL_CONTFAIL 0xf36f0080 +#define F0900_P2_NOFIFO_BCHERR 0xf36f0020 + +/*P2_TSSTATEM*/ +#define R0900_P2_TSSTATEM 0xf370 +#define F0900_P2_TSDIL_ON 0xf3700080 +#define F0900_P2_TSRS_ON 0xf3700020 +#define F0900_P2_TSDESCRAMB_ON 0xf3700010 +#define F0900_P2_TSFRAME_MODE 0xf3700008 +#define F0900_P2_TS_DISABLE 0xf3700004 +#define F0900_P2_TSOUT_NOSYNC 0xf3700001 + +/*P2_TSCFGH*/ +#define R0900_P2_TSCFGH 0xf372 +#define F0900_P2_TSFIFO_DVBCI 0xf3720080 +#define F0900_P2_TSFIFO_SERIAL 0xf3720040 +#define F0900_P2_TSFIFO_TEIUPDATE 0xf3720020 +#define F0900_P2_TSFIFO_DUTY50 0xf3720010 +#define F0900_P2_TSFIFO_HSGNLOUT 0xf3720008 +#define F0900_P2_TSFIFO_ERRMODE 0xf3720006 +#define F0900_P2_RST_HWARE 0xf3720001 + +/*P2_TSCFGM*/ +#define R0900_P2_TSCFGM 0xf373 +#define F0900_P2_TSFIFO_MANSPEED 0xf37300c0 +#define F0900_P2_TSFIFO_PERMDATA 0xf3730020 +#define F0900_P2_TSFIFO_DPUNACT 0xf3730002 +#define F0900_P2_TSFIFO_INVDATA 0xf3730001 + +/*P2_TSCFGL*/ +#define R0900_P2_TSCFGL 0xf374 +#define F0900_P2_TSFIFO_BCLKDEL1CK 0xf37400c0 +#define F0900_P2_BCHERROR_MODE 0xf3740030 +#define F0900_P2_TSFIFO_NSGNL2DATA 0xf3740008 +#define F0900_P2_TSFIFO_EMBINDVB 0xf3740004 +#define F0900_P2_TSFIFO_BITSPEED 0xf3740003 + +/*P2_TSINSDELH*/ +#define R0900_P2_TSINSDELH 0xf376 +#define F0900_P2_TSDEL_SYNCBYTE 0xf3760080 +#define F0900_P2_TSDEL_XXHEADER 0xf3760040 +#define F0900_P2_TSDEL_BBHEADER 0xf3760020 +#define F0900_P2_TSDEL_DATAFIELD 0xf3760010 +#define F0900_P2_TSINSDEL_ISCR 0xf3760008 +#define F0900_P2_TSINSDEL_NPD 0xf3760004 +#define F0900_P2_TSINSDEL_RSPARITY 0xf3760002 +#define F0900_P2_TSINSDEL_CRC8 0xf3760001 + +/*P2_TSDIVN*/ +#define R0900_P2_TSDIVN 0xf379 +#define F0900_P2_TSFIFO_SPEEDMODE 0xf37900c0 + +/*P2_TSCFG4*/ +#define R0900_P2_TSCFG4 0xf37a +#define F0900_P2_TSFIFO_TSSPEEDMODE 0xf37a00c0 + +/*P2_TSSPEED*/ +#define R0900_P2_TSSPEED 0xf380 +#define F0900_P2_TSFIFO_OUTSPEED 0xf38000ff + +/*P2_TSSTATUS*/ +#define R0900_P2_TSSTATUS 0xf381 +#define F0900_P2_TSFIFO_LINEOK 0xf3810080 +#define F0900_P2_TSFIFO_ERROR 0xf3810040 +#define F0900_P2_DIL_READY 0xf3810001 + +/*P2_TSSTATUS2*/ +#define R0900_P2_TSSTATUS2 0xf382 +#define F0900_P2_TSFIFO_DEMODSEL 0xf3820080 +#define F0900_P2_TSFIFOSPEED_STORE 0xf3820040 +#define F0900_P2_DILXX_RESET 0xf3820020 +#define F0900_P2_TSSERIAL_IMPOS 0xf3820010 +#define F0900_P2_SCRAMBDETECT 0xf3820002 + +/*P2_TSBITRATE1*/ +#define R0900_P2_TSBITRATE1 0xf383 +#define F0900_P2_TSFIFO_BITRATE1 0xf38300ff + +/*P2_TSBITRATE0*/ +#define R0900_P2_TSBITRATE0 0xf384 +#define F0900_P2_TSFIFO_BITRATE0 0xf38400ff + +/*P2_ERRCTRL1*/ +#define R0900_P2_ERRCTRL1 0xf398 +#define F0900_P2_ERR_SOURCE1 0xf39800f0 +#define F0900_P2_NUM_EVENT1 0xf3980007 + +/*P2_ERRCNT12*/ +#define R0900_P2_ERRCNT12 0xf399 +#define F0900_P2_ERRCNT1_OLDVALUE 0xf3990080 +#define F0900_P2_ERR_CNT12 0xf399007f + +/*P2_ERRCNT11*/ +#define R0900_P2_ERRCNT11 0xf39a +#define F0900_P2_ERR_CNT11 0xf39a00ff + +/*P2_ERRCNT10*/ +#define R0900_P2_ERRCNT10 0xf39b +#define F0900_P2_ERR_CNT10 0xf39b00ff + +/*P2_ERRCTRL2*/ +#define R0900_P2_ERRCTRL2 0xf39c +#define F0900_P2_ERR_SOURCE2 0xf39c00f0 +#define F0900_P2_NUM_EVENT2 0xf39c0007 + +/*P2_ERRCNT22*/ +#define R0900_P2_ERRCNT22 0xf39d +#define F0900_P2_ERRCNT2_OLDVALUE 0xf39d0080 +#define F0900_P2_ERR_CNT22 0xf39d007f + +/*P2_ERRCNT21*/ +#define R0900_P2_ERRCNT21 0xf39e +#define F0900_P2_ERR_CNT21 0xf39e00ff + +/*P2_ERRCNT20*/ +#define R0900_P2_ERRCNT20 0xf39f +#define F0900_P2_ERR_CNT20 0xf39f00ff + +/*P2_FECSPY*/ +#define R0900_P2_FECSPY 0xf3a0 +#define F0900_P2_SPY_ENABLE 0xf3a00080 +#define F0900_P2_NO_SYNCBYTE 0xf3a00040 +#define F0900_P2_SERIAL_MODE 0xf3a00020 +#define F0900_P2_UNUSUAL_PACKET 0xf3a00010 +#define F0900_P2_BERMETER_DATAMODE 0xf3a00008 +#define F0900_P2_BERMETER_LMODE 0xf3a00002 +#define F0900_P2_BERMETER_RESET 0xf3a00001 + +/*P2_FSPYCFG*/ +#define R0900_P2_FSPYCFG 0xf3a1 +#define F0900_P2_FECSPY_INPUT 0xf3a100c0 +#define F0900_P2_RST_ON_ERROR 0xf3a10020 +#define F0900_P2_ONE_SHOT 0xf3a10010 +#define F0900_P2_I2C_MODE 0xf3a1000c +#define F0900_P2_SPY_HYSTERESIS 0xf3a10003 + +/*P2_FSPYDATA*/ +#define R0900_P2_FSPYDATA 0xf3a2 +#define F0900_P2_SPY_STUFFING 0xf3a20080 +#define F0900_P2_SPY_CNULLPKT 0xf3a20020 +#define F0900_P2_SPY_OUTDATA_MODE 0xf3a2001f + +/*P2_FSPYOUT*/ +#define R0900_P2_FSPYOUT 0xf3a3 +#define F0900_P2_FSPY_DIRECT 0xf3a30080 +#define F0900_P2_STUFF_MODE 0xf3a30007 + +/*P2_FSTATUS*/ +#define R0900_P2_FSTATUS 0xf3a4 +#define F0900_P2_SPY_ENDSIM 0xf3a40080 +#define F0900_P2_VALID_SIM 0xf3a40040 +#define F0900_P2_FOUND_SIGNAL 0xf3a40020 +#define F0900_P2_DSS_SYNCBYTE 0xf3a40010 +#define F0900_P2_RESULT_STATE 0xf3a4000f + +/*P2_FBERCPT4*/ +#define R0900_P2_FBERCPT4 0xf3a8 +#define F0900_P2_FBERMETER_CPT4 0xf3a800ff + +/*P2_FBERCPT3*/ +#define R0900_P2_FBERCPT3 0xf3a9 +#define F0900_P2_FBERMETER_CPT3 0xf3a900ff + +/*P2_FBERCPT2*/ +#define R0900_P2_FBERCPT2 0xf3aa +#define F0900_P2_FBERMETER_CPT2 0xf3aa00ff + +/*P2_FBERCPT1*/ +#define R0900_P2_FBERCPT1 0xf3ab +#define F0900_P2_FBERMETER_CPT1 0xf3ab00ff + +/*P2_FBERCPT0*/ +#define R0900_P2_FBERCPT0 0xf3ac +#define F0900_P2_FBERMETER_CPT0 0xf3ac00ff + +/*P2_FBERERR2*/ +#define R0900_P2_FBERERR2 0xf3ad +#define F0900_P2_FBERMETER_ERR2 0xf3ad00ff + +/*P2_FBERERR1*/ +#define R0900_P2_FBERERR1 0xf3ae +#define F0900_P2_FBERMETER_ERR1 0xf3ae00ff + +/*P2_FBERERR0*/ +#define R0900_P2_FBERERR0 0xf3af +#define F0900_P2_FBERMETER_ERR0 0xf3af00ff + +/*P2_FSPYBER*/ +#define R0900_P2_FSPYBER 0xf3b2 +#define F0900_P2_FSPYBER_SYNCBYTE 0xf3b20010 +#define F0900_P2_FSPYBER_UNSYNC 0xf3b20008 +#define F0900_P2_FSPYBER_CTIME 0xf3b20007 + +/*P1_IQCONST*/ +#define R0900_P1_IQCONST 0xf400 +#define IQCONST REGx(R0900_P1_IQCONST) +#define F0900_P1_CONSTEL_SELECT 0xf4000060 +#define F0900_P1_IQSYMB_SEL 0xf400001f + +/*P1_NOSCFG*/ +#define R0900_P1_NOSCFG 0xf401 +#define NOSCFG REGx(R0900_P1_NOSCFG) +#define F0900_P1_DUMMYPL_NOSDATA 0xf4010020 +#define F0900_P1_NOSPLH_BETA 0xf4010018 +#define F0900_P1_NOSDATA_BETA 0xf4010007 + +/*P1_ISYMB*/ +#define R0900_P1_ISYMB 0xf402 +#define ISYMB REGx(R0900_P1_ISYMB) +#define F0900_P1_I_SYMBOL 0xf40201ff + +/*P1_QSYMB*/ +#define R0900_P1_QSYMB 0xf403 +#define QSYMB REGx(R0900_P1_QSYMB) +#define F0900_P1_Q_SYMBOL 0xf40301ff + +/*P1_AGC1CFG*/ +#define R0900_P1_AGC1CFG 0xf404 +#define AGC1CFG REGx(R0900_P1_AGC1CFG) +#define F0900_P1_DC_FROZEN 0xf4040080 +#define F0900_P1_DC_CORRECT 0xf4040040 +#define F0900_P1_AMM_FROZEN 0xf4040020 +#define F0900_P1_AMM_CORRECT 0xf4040010 +#define F0900_P1_QUAD_FROZEN 0xf4040008 +#define F0900_P1_QUAD_CORRECT 0xf4040004 + +/*P1_AGC1CN*/ +#define R0900_P1_AGC1CN 0xf406 +#define AGC1CN REGx(R0900_P1_AGC1CN) +#define F0900_P1_AGC1_LOCKED 0xf4060080 +#define F0900_P1_AGC1_MINPOWER 0xf4060010 +#define F0900_P1_AGCOUT_FAST 0xf4060008 +#define F0900_P1_AGCIQ_BETA 0xf4060007 + +/*P1_AGC1REF*/ +#define R0900_P1_AGC1REF 0xf407 +#define AGC1REF REGx(R0900_P1_AGC1REF) +#define F0900_P1_AGCIQ_REF 0xf40700ff + +/*P1_IDCCOMP*/ +#define R0900_P1_IDCCOMP 0xf408 +#define IDCCOMP REGx(R0900_P1_IDCCOMP) +#define F0900_P1_IAVERAGE_ADJ 0xf40801ff + +/*P1_QDCCOMP*/ +#define R0900_P1_QDCCOMP 0xf409 +#define QDCCOMP REGx(R0900_P1_QDCCOMP) +#define F0900_P1_QAVERAGE_ADJ 0xf40901ff + +/*P1_POWERI*/ +#define R0900_P1_POWERI 0xf40a +#define POWERI REGx(R0900_P1_POWERI) +#define F0900_P1_POWER_I 0xf40a00ff +#define POWER_I FLDx(F0900_P1_POWER_I) + +/*P1_POWERQ*/ +#define R0900_P1_POWERQ 0xf40b +#define POWERQ REGx(R0900_P1_POWERQ) +#define F0900_P1_POWER_Q 0xf40b00ff +#define POWER_Q FLDx(F0900_P1_POWER_Q) + +/*P1_AGC1AMM*/ +#define R0900_P1_AGC1AMM 0xf40c +#define AGC1AMM REGx(R0900_P1_AGC1AMM) +#define F0900_P1_AMM_VALUE 0xf40c00ff + +/*P1_AGC1QUAD*/ +#define R0900_P1_AGC1QUAD 0xf40d +#define AGC1QUAD REGx(R0900_P1_AGC1QUAD) +#define F0900_P1_QUAD_VALUE 0xf40d01ff + +/*P1_AGCIQIN1*/ +#define R0900_P1_AGCIQIN1 0xf40e +#define AGCIQIN1 REGx(R0900_P1_AGCIQIN1) +#define F0900_P1_AGCIQ_VALUE1 0xf40e00ff +#define AGCIQ_VALUE1 FLDx(F0900_P1_AGCIQ_VALUE1) + +/*P1_AGCIQIN0*/ +#define R0900_P1_AGCIQIN0 0xf40f +#define AGCIQIN0 REGx(R0900_P1_AGCIQIN0) +#define F0900_P1_AGCIQ_VALUE0 0xf40f00ff +#define AGCIQ_VALUE0 FLDx(F0900_P1_AGCIQ_VALUE0) + +/*P1_DEMOD*/ +#define R0900_P1_DEMOD 0xf410 +#define DEMOD REGx(R0900_P1_DEMOD) +#define F0900_P1_MANUALS2_ROLLOFF 0xf4100080 +#define MANUALS2_ROLLOFF FLDx(F0900_P1_MANUALS2_ROLLOFF) + +#define F0900_P1_SPECINV_CONTROL 0xf4100030 +#define SPECINV_CONTROL FLDx(F0900_P1_SPECINV_CONTROL) +#define F0900_P1_FORCE_ENASAMP 0xf4100008 +#define F0900_P1_MANUALSX_ROLLOFF 0xf4100004 +#define MANUALSX_ROLLOFF FLDx(F0900_P1_MANUALSX_ROLLOFF) +#define F0900_P1_ROLLOFF_CONTROL 0xf4100003 +#define ROLLOFF_CONTROL FLDx(F0900_P1_ROLLOFF_CONTROL) + +/*P1_DMDMODCOD*/ +#define R0900_P1_DMDMODCOD 0xf411 +#define DMDMODCOD REGx(R0900_P1_DMDMODCOD) +#define F0900_P1_MANUAL_MODCOD 0xf4110080 +#define F0900_P1_DEMOD_MODCOD 0xf411007c +#define DEMOD_MODCOD FLDx(F0900_P1_DEMOD_MODCOD) +#define F0900_P1_DEMOD_TYPE 0xf4110003 +#define DEMOD_TYPE FLDx(F0900_P1_DEMOD_TYPE) + +/*P1_DSTATUS*/ +#define R0900_P1_DSTATUS 0xf412 +#define DSTATUS REGx(R0900_P1_DSTATUS) +#define F0900_P1_CAR_LOCK 0xf4120080 +#define F0900_P1_TMGLOCK_QUALITY 0xf4120060 +#define TMGLOCK_QUALITY FLDx(F0900_P1_TMGLOCK_QUALITY) +#define F0900_P1_LOCK_DEFINITIF 0xf4120008 +#define LOCK_DEFINITIF FLDx(F0900_P1_LOCK_DEFINITIF) +#define F0900_P1_OVADC_DETECT 0xf4120001 + +/*P1_DSTATUS2*/ +#define R0900_P1_DSTATUS2 0xf413 +#define DSTATUS2 REGx(R0900_P1_DSTATUS2) +#define F0900_P1_DEMOD_DELOCK 0xf4130080 +#define F0900_P1_AGC1_NOSIGNALACK 0xf4130008 +#define F0900_P1_AGC2_OVERFLOW 0xf4130004 +#define F0900_P1_CFR_OVERFLOW 0xf4130002 +#define F0900_P1_GAMMA_OVERUNDER 0xf4130001 + +/*P1_DMDCFGMD*/ +#define R0900_P1_DMDCFGMD 0xf414 +#define DMDCFGMD REGx(R0900_P1_DMDCFGMD) +#define F0900_P1_DVBS2_ENABLE 0xf4140080 +#define DVBS2_ENABLE FLDx(F0900_P1_DVBS2_ENABLE) +#define F0900_P1_DVBS1_ENABLE 0xf4140040 +#define DVBS1_ENABLE FLDx(F0900_P1_DVBS1_ENABLE) +#define F0900_P1_SCAN_ENABLE 0xf4140010 +#define SCAN_ENABLE FLDx(F0900_P1_SCAN_ENABLE) +#define F0900_P1_CFR_AUTOSCAN 0xf4140008 +#define CFR_AUTOSCAN FLDx(F0900_P1_CFR_AUTOSCAN) +#define F0900_P1_TUN_RNG 0xf4140003 + +/*P1_DMDCFG2*/ +#define R0900_P1_DMDCFG2 0xf415 +#define DMDCFG2 REGx(R0900_P1_DMDCFG2) +#define F0900_P1_S1S2_SEQUENTIAL 0xf4150040 +#define S1S2_SEQUENTIAL FLDx(F0900_P1_S1S2_SEQUENTIAL) +#define F0900_P1_INFINITE_RELOCK 0xf4150010 + +/*P1_DMDISTATE*/ +#define R0900_P1_DMDISTATE 0xf416 +#define DMDISTATE REGx(R0900_P1_DMDISTATE) +#define F0900_P1_I2C_DEMOD_MODE 0xf416001f +#define DEMOD_MODE FLDx(F0900_P1_I2C_DEMOD_MODE) + +/*P1_DMDT0M*/ +#define R0900_P1_DMDT0M 0xf417 +#define DMDT0M REGx(R0900_P1_DMDT0M) +#define F0900_P1_DMDT0_MIN 0xf41700ff + +/*P1_DMDSTATE*/ +#define R0900_P1_DMDSTATE 0xf41b +#define DMDSTATE REGx(R0900_P1_DMDSTATE) +#define F0900_P1_HEADER_MODE 0xf41b0060 +#define HEADER_MODE FLDx(F0900_P1_HEADER_MODE) + +/*P1_DMDFLYW*/ +#define R0900_P1_DMDFLYW 0xf41c +#define DMDFLYW REGx(R0900_P1_DMDFLYW) +#define F0900_P1_I2C_IRQVAL 0xf41c00f0 +#define F0900_P1_FLYWHEEL_CPT 0xf41c000f +#define FLYWHEEL_CPT FLDx(F0900_P1_FLYWHEEL_CPT) + +/*P1_DSTATUS3*/ +#define R0900_P1_DSTATUS3 0xf41d +#define DSTATUS3 REGx(R0900_P1_DSTATUS3) +#define F0900_P1_DEMOD_CFGMODE 0xf41d0060 + +/*P1_DMDCFG3*/ +#define R0900_P1_DMDCFG3 0xf41e +#define DMDCFG3 REGx(R0900_P1_DMDCFG3) +#define F0900_P1_NOSTOP_FIFOFULL 0xf41e0008 + +/*P1_DMDCFG4*/ +#define R0900_P1_DMDCFG4 0xf41f +#define DMDCFG4 REGx(R0900_P1_DMDCFG4) +#define F0900_P1_TUNER_NRELAUNCH 0xf41f0008 + +/*P1_CORRELMANT*/ +#define R0900_P1_CORRELMANT 0xf420 +#define CORRELMANT REGx(R0900_P1_CORRELMANT) +#define F0900_P1_CORREL_MANT 0xf42000ff + +/*P1_CORRELABS*/ +#define R0900_P1_CORRELABS 0xf421 +#define CORRELABS REGx(R0900_P1_CORRELABS) +#define F0900_P1_CORREL_ABS 0xf42100ff + +/*P1_CORRELEXP*/ +#define R0900_P1_CORRELEXP 0xf422 +#define CORRELEXP REGx(R0900_P1_CORRELEXP) +#define F0900_P1_CORREL_ABSEXP 0xf42200f0 +#define F0900_P1_CORREL_EXP 0xf422000f + +/*P1_PLHMODCOD*/ +#define R0900_P1_PLHMODCOD 0xf424 +#define PLHMODCOD REGx(R0900_P1_PLHMODCOD) +#define F0900_P1_SPECINV_DEMOD 0xf4240080 +#define SPECINV_DEMOD FLDx(F0900_P1_SPECINV_DEMOD) +#define F0900_P1_PLH_MODCOD 0xf424007c +#define F0900_P1_PLH_TYPE 0xf4240003 + +/*P1_DMDREG*/ +#define R0900_P1_DMDREG 0xf425 +#define DMDREG REGx(R0900_P1_DMDREG) +#define F0900_P1_DECIM_PLFRAMES 0xf4250001 + +/*P1_AGC2O*/ +#define R0900_P1_AGC2O 0xf42c +#define AGC2O REGx(R0900_P1_AGC2O) +#define F0900_P1_AGC2_COEF 0xf42c0007 + +/*P1_AGC2REF*/ +#define R0900_P1_AGC2REF 0xf42d +#define AGC2REF REGx(R0900_P1_AGC2REF) +#define F0900_P1_AGC2_REF 0xf42d00ff + +/*P1_AGC1ADJ*/ +#define R0900_P1_AGC1ADJ 0xf42e +#define AGC1ADJ REGx(R0900_P1_AGC1ADJ) +#define F0900_P1_AGC1_ADJUSTED 0xf42e007f + +/*P1_AGC2I1*/ +#define R0900_P1_AGC2I1 0xf436 +#define AGC2I1 REGx(R0900_P1_AGC2I1) +#define F0900_P1_AGC2_INTEGRATOR1 0xf43600ff + +/*P1_AGC2I0*/ +#define R0900_P1_AGC2I0 0xf437 +#define AGC2I0 REGx(R0900_P1_AGC2I0) +#define F0900_P1_AGC2_INTEGRATOR0 0xf43700ff + +/*P1_CARCFG*/ +#define R0900_P1_CARCFG 0xf438 +#define CARCFG REGx(R0900_P1_CARCFG) +#define F0900_P1_CFRUPLOW_AUTO 0xf4380080 +#define F0900_P1_CFRUPLOW_TEST 0xf4380040 +#define F0900_P1_ROTAON 0xf4380004 +#define F0900_P1_PH_DET_ALGO 0xf4380003 + +/*P1_ACLC*/ +#define R0900_P1_ACLC 0xf439 +#define ACLC REGx(R0900_P1_ACLC) +#define F0900_P1_CAR_ALPHA_MANT 0xf4390030 +#define F0900_P1_CAR_ALPHA_EXP 0xf439000f + +/*P1_BCLC*/ +#define R0900_P1_BCLC 0xf43a +#define BCLC REGx(R0900_P1_BCLC) +#define F0900_P1_CAR_BETA_MANT 0xf43a0030 +#define F0900_P1_CAR_BETA_EXP 0xf43a000f + +/*P1_CARFREQ*/ +#define R0900_P1_CARFREQ 0xf43d +#define CARFREQ REGx(R0900_P1_CARFREQ) +#define F0900_P1_KC_COARSE_EXP 0xf43d00f0 +#define F0900_P1_BETA_FREQ 0xf43d000f + +/*P1_CARHDR*/ +#define R0900_P1_CARHDR 0xf43e +#define CARHDR REGx(R0900_P1_CARHDR) +#define F0900_P1_K_FREQ_HDR 0xf43e00ff + +/*P1_LDT*/ +#define R0900_P1_LDT 0xf43f +#define LDT REGx(R0900_P1_LDT) +#define F0900_P1_CARLOCK_THRES 0xf43f01ff + +/*P1_LDT2*/ +#define R0900_P1_LDT2 0xf440 +#define LDT2 REGx(R0900_P1_LDT2) +#define F0900_P1_CARLOCK_THRES2 0xf44001ff + +/*P1_CFRICFG*/ +#define R0900_P1_CFRICFG 0xf441 +#define CFRICFG REGx(R0900_P1_CFRICFG) +#define F0900_P1_NEG_CFRSTEP 0xf4410001 + +/*P1_CFRUP1*/ +#define R0900_P1_CFRUP1 0xf442 +#define CFRUP1 REGx(R0900_P1_CFRUP1) +#define F0900_P1_CFR_UP1 0xf44201ff +#define CFR_UP1 FLDx(F0900_P1_CFR_UP1) + +/*P1_CFRUP0*/ +#define R0900_P1_CFRUP0 0xf443 +#define CFRUP0 REGx(R0900_P1_CFRUP0) +#define F0900_P1_CFR_UP0 0xf44300ff +#define CFR_UP0 FLDx(F0900_P1_CFR_UP0) + +/*P1_CFRLOW1*/ +#define R0900_P1_CFRLOW1 0xf446 +#define CFRLOW1 REGx(R0900_P1_CFRLOW1) +#define F0900_P1_CFR_LOW1 0xf44601ff +#define CFR_LOW1 FLDx(F0900_P1_CFR_LOW1) + +/*P1_CFRLOW0*/ +#define R0900_P1_CFRLOW0 0xf447 +#define CFRLOW0 REGx(R0900_P1_CFRLOW0) +#define F0900_P1_CFR_LOW0 0xf44700ff +#define CFR_LOW0 FLDx(F0900_P1_CFR_LOW0) + +/*P1_CFRINIT1*/ +#define R0900_P1_CFRINIT1 0xf448 +#define CFRINIT1 REGx(R0900_P1_CFRINIT1) +#define F0900_P1_CFR_INIT1 0xf44801ff +#define CFR_INIT1 FLDx(F0900_P1_CFR_INIT1) + +/*P1_CFRINIT0*/ +#define R0900_P1_CFRINIT0 0xf449 +#define CFRINIT0 REGx(R0900_P1_CFRINIT0) +#define F0900_P1_CFR_INIT0 0xf44900ff +#define CFR_INIT0 FLDx(F0900_P1_CFR_INIT0) + +/*P1_CFRINC1*/ +#define R0900_P1_CFRINC1 0xf44a +#define CFRINC1 REGx(R0900_P1_CFRINC1) +#define F0900_P1_MANUAL_CFRINC 0xf44a0080 +#define F0900_P1_CFR_INC1 0xf44a003f + +/*P1_CFRINC0*/ +#define R0900_P1_CFRINC0 0xf44b +#define CFRINC0 REGx(R0900_P1_CFRINC0) +#define F0900_P1_CFR_INC0 0xf44b00f8 + +/*P1_CFR2*/ +#define R0900_P1_CFR2 0xf44c +#define CFR2 REGx(R0900_P1_CFR2) +#define F0900_P1_CAR_FREQ2 0xf44c01ff +#define CAR_FREQ2 FLDx(F0900_P1_CAR_FREQ2) + +/*P1_CFR1*/ +#define R0900_P1_CFR1 0xf44d +#define CFR1 REGx(R0900_P1_CFR1) +#define F0900_P1_CAR_FREQ1 0xf44d00ff +#define CAR_FREQ1 FLDx(F0900_P1_CAR_FREQ1) + +/*P1_CFR0*/ +#define R0900_P1_CFR0 0xf44e +#define CFR0 REGx(R0900_P1_CFR0) +#define F0900_P1_CAR_FREQ0 0xf44e00ff +#define CAR_FREQ0 FLDx(F0900_P1_CAR_FREQ0) + +/*P1_LDI*/ +#define R0900_P1_LDI 0xf44f +#define LDI REGx(R0900_P1_LDI) +#define F0900_P1_LOCK_DET_INTEGR 0xf44f01ff + +/*P1_TMGCFG*/ +#define R0900_P1_TMGCFG 0xf450 +#define TMGCFG REGx(R0900_P1_TMGCFG) +#define F0900_P1_TMGLOCK_BETA 0xf45000c0 +#define F0900_P1_DO_TIMING_CORR 0xf4500010 +#define F0900_P1_TMG_MINFREQ 0xf4500003 + +/*P1_RTC*/ +#define R0900_P1_RTC 0xf451 +#define RTC REGx(R0900_P1_RTC) +#define F0900_P1_TMGALPHA_EXP 0xf45100f0 +#define F0900_P1_TMGBETA_EXP 0xf451000f + +/*P1_RTCS2*/ +#define R0900_P1_RTCS2 0xf452 +#define RTCS2 REGx(R0900_P1_RTCS2) +#define F0900_P1_TMGALPHAS2_EXP 0xf45200f0 +#define F0900_P1_TMGBETAS2_EXP 0xf452000f + +/*P1_TMGTHRISE*/ +#define R0900_P1_TMGTHRISE 0xf453 +#define TMGTHRISE REGx(R0900_P1_TMGTHRISE) +#define F0900_P1_TMGLOCK_THRISE 0xf45300ff + +/*P1_TMGTHFALL*/ +#define R0900_P1_TMGTHFALL 0xf454 +#define TMGTHFALL REGx(R0900_P1_TMGTHFALL) +#define F0900_P1_TMGLOCK_THFALL 0xf45400ff + +/*P1_SFRUPRATIO*/ +#define R0900_P1_SFRUPRATIO 0xf455 +#define SFRUPRATIO REGx(R0900_P1_SFRUPRATIO) +#define F0900_P1_SFR_UPRATIO 0xf45500ff + +/*P1_SFRLOWRATIO*/ +#define R0900_P1_SFRLOWRATIO 0xf456 +#define F0900_P1_SFR_LOWRATIO 0xf45600ff + +/*P1_KREFTMG*/ +#define R0900_P1_KREFTMG 0xf458 +#define KREFTMG REGx(R0900_P1_KREFTMG) +#define F0900_P1_KREF_TMG 0xf45800ff + +/*P1_SFRSTEP*/ +#define R0900_P1_SFRSTEP 0xf459 +#define SFRSTEP REGx(R0900_P1_SFRSTEP) +#define F0900_P1_SFR_SCANSTEP 0xf45900f0 +#define F0900_P1_SFR_CENTERSTEP 0xf459000f + +/*P1_TMGCFG2*/ +#define R0900_P1_TMGCFG2 0xf45a +#define TMGCFG2 REGx(R0900_P1_TMGCFG2) +#define F0900_P1_SFRRATIO_FINE 0xf45a0001 + +/*P1_KREFTMG2*/ +#define R0900_P1_KREFTMG2 0xf45b +#define KREFTMG2 REGx(R0900_P1_KREFTMG2) +#define F0900_P1_KREF_TMG2 0xf45b00ff + +/*P1_SFRINIT1*/ +#define R0900_P1_SFRINIT1 0xf45e +#define SFRINIT1 REGx(R0900_P1_SFRINIT1) +#define F0900_P1_SFR_INIT1 0xf45e007f + +/*P1_SFRINIT0*/ +#define R0900_P1_SFRINIT0 0xf45f +#define SFRINIT0 REGx(R0900_P1_SFRINIT0) +#define F0900_P1_SFR_INIT0 0xf45f00ff + +/*P1_SFRUP1*/ +#define R0900_P1_SFRUP1 0xf460 +#define SFRUP1 REGx(R0900_P1_SFRUP1) +#define F0900_P1_AUTO_GUP 0xf4600080 +#define AUTO_GUP FLDx(F0900_P1_AUTO_GUP) +#define F0900_P1_SYMB_FREQ_UP1 0xf460007f + +/*P1_SFRUP0*/ +#define R0900_P1_SFRUP0 0xf461 +#define SFRUP0 REGx(R0900_P1_SFRUP0) +#define F0900_P1_SYMB_FREQ_UP0 0xf46100ff + +/*P1_SFRLOW1*/ +#define R0900_P1_SFRLOW1 0xf462 +#define SFRLOW1 REGx(R0900_P1_SFRLOW1) +#define F0900_P1_AUTO_GLOW 0xf4620080 +#define AUTO_GLOW FLDx(F0900_P1_AUTO_GLOW) +#define F0900_P1_SYMB_FREQ_LOW1 0xf462007f + +/*P1_SFRLOW0*/ +#define R0900_P1_SFRLOW0 0xf463 +#define SFRLOW0 REGx(R0900_P1_SFRLOW0) +#define F0900_P1_SYMB_FREQ_LOW0 0xf46300ff + +/*P1_SFR3*/ +#define R0900_P1_SFR3 0xf464 +#define SFR3 REGx(R0900_P1_SFR3) +#define F0900_P1_SYMB_FREQ3 0xf46400ff +#define SYMB_FREQ3 FLDx(F0900_P1_SYMB_FREQ3) + +/*P1_SFR2*/ +#define R0900_P1_SFR2 0xf465 +#define SFR2 REGx(R0900_P1_SFR2) +#define F0900_P1_SYMB_FREQ2 0xf46500ff +#define SYMB_FREQ2 FLDx(F0900_P1_SYMB_FREQ2) + +/*P1_SFR1*/ +#define R0900_P1_SFR1 0xf466 +#define SFR1 REGx(R0900_P1_SFR1) +#define F0900_P1_SYMB_FREQ1 0xf46600ff +#define SYMB_FREQ1 FLDx(F0900_P1_SYMB_FREQ1) + +/*P1_SFR0*/ +#define R0900_P1_SFR0 0xf467 +#define SFR0 REGx(R0900_P1_SFR0) +#define F0900_P1_SYMB_FREQ0 0xf46700ff +#define SYMB_FREQ0 FLDx(F0900_P1_SYMB_FREQ0) + +/*P1_TMGREG2*/ +#define R0900_P1_TMGREG2 0xf468 +#define TMGREG2 REGx(R0900_P1_TMGREG2) +#define F0900_P1_TMGREG2 0xf46800ff + +/*P1_TMGREG1*/ +#define R0900_P1_TMGREG1 0xf469 +#define TMGREG1 REGx(R0900_P1_TMGREG1) +#define F0900_P1_TMGREG1 0xf46900ff + +/*P1_TMGREG0*/ +#define R0900_P1_TMGREG0 0xf46a +#define TMGREG0 REGx(R0900_P1_TMGREG0) +#define F0900_P1_TMGREG0 0xf46a00ff + +/*P1_TMGLOCK1*/ +#define R0900_P1_TMGLOCK1 0xf46b +#define TMGLOCK1 REGx(R0900_P1_TMGLOCK1) +#define F0900_P1_TMGLOCK_LEVEL1 0xf46b01ff + +/*P1_TMGLOCK0*/ +#define R0900_P1_TMGLOCK0 0xf46c +#define TMGLOCK0 REGx(R0900_P1_TMGLOCK0) +#define F0900_P1_TMGLOCK_LEVEL0 0xf46c00ff + +/*P1_TMGOBS*/ +#define R0900_P1_TMGOBS 0xf46d +#define TMGOBS REGx(R0900_P1_TMGOBS) +#define F0900_P1_ROLLOFF_STATUS 0xf46d00c0 +#define ROLLOFF_STATUS FLDx(F0900_P1_ROLLOFF_STATUS) + +/*P1_EQUALCFG*/ +#define R0900_P1_EQUALCFG 0xf46f +#define EQUALCFG REGx(R0900_P1_EQUALCFG) +#define F0900_P1_EQUAL_ON 0xf46f0040 +#define F0900_P1_MU_EQUALDFE 0xf46f0007 + +/*P1_EQUAI1*/ +#define R0900_P1_EQUAI1 0xf470 +#define EQUAI1 REGx(R0900_P1_EQUAI1) +#define F0900_P1_EQUA_ACCI1 0xf47001ff + +/*P1_EQUAQ1*/ +#define R0900_P1_EQUAQ1 0xf471 +#define EQUAQ1 REGx(R0900_P1_EQUAQ1) +#define F0900_P1_EQUA_ACCQ1 0xf47101ff + +/*P1_EQUAI2*/ +#define R0900_P1_EQUAI2 0xf472 +#define EQUAI2 REGx(R0900_P1_EQUAI2) +#define F0900_P1_EQUA_ACCI2 0xf47201ff + +/*P1_EQUAQ2*/ +#define R0900_P1_EQUAQ2 0xf473 +#define EQUAQ2 REGx(R0900_P1_EQUAQ2) +#define F0900_P1_EQUA_ACCQ2 0xf47301ff + +/*P1_EQUAI3*/ +#define R0900_P1_EQUAI3 0xf474 +#define EQUAI3 REGx(R0900_P1_EQUAI3) +#define F0900_P1_EQUA_ACCI3 0xf47401ff + +/*P1_EQUAQ3*/ +#define R0900_P1_EQUAQ3 0xf475 +#define EQUAQ3 REGx(R0900_P1_EQUAQ3) +#define F0900_P1_EQUA_ACCQ3 0xf47501ff + +/*P1_EQUAI4*/ +#define R0900_P1_EQUAI4 0xf476 +#define EQUAI4 REGx(R0900_P1_EQUAI4) +#define F0900_P1_EQUA_ACCI4 0xf47601ff + +/*P1_EQUAQ4*/ +#define R0900_P1_EQUAQ4 0xf477 +#define EQUAQ4 REGx(R0900_P1_EQUAQ4) +#define F0900_P1_EQUA_ACCQ4 0xf47701ff + +/*P1_EQUAI5*/ +#define R0900_P1_EQUAI5 0xf478 +#define EQUAI5 REGx(R0900_P1_EQUAI5) +#define F0900_P1_EQUA_ACCI5 0xf47801ff + +/*P1_EQUAQ5*/ +#define R0900_P1_EQUAQ5 0xf479 +#define EQUAQ5 REGx(R0900_P1_EQUAQ5) +#define F0900_P1_EQUA_ACCQ5 0xf47901ff + +/*P1_EQUAI6*/ +#define R0900_P1_EQUAI6 0xf47a +#define EQUAI6 REGx(R0900_P1_EQUAI6) +#define F0900_P1_EQUA_ACCI6 0xf47a01ff + +/*P1_EQUAQ6*/ +#define R0900_P1_EQUAQ6 0xf47b +#define EQUAQ6 REGx(R0900_P1_EQUAQ6) +#define F0900_P1_EQUA_ACCQ6 0xf47b01ff + +/*P1_EQUAI7*/ +#define R0900_P1_EQUAI7 0xf47c +#define EQUAI7 REGx(R0900_P1_EQUAI7) +#define F0900_P1_EQUA_ACCI7 0xf47c01ff + +/*P1_EQUAQ7*/ +#define R0900_P1_EQUAQ7 0xf47d +#define EQUAQ7 REGx(R0900_P1_EQUAQ7) +#define F0900_P1_EQUA_ACCQ7 0xf47d01ff + +/*P1_EQUAI8*/ +#define R0900_P1_EQUAI8 0xf47e +#define EQUAI8 REGx(R0900_P1_EQUAI8) +#define F0900_P1_EQUA_ACCI8 0xf47e01ff + +/*P1_EQUAQ8*/ +#define R0900_P1_EQUAQ8 0xf47f +#define EQUAQ8 REGx(R0900_P1_EQUAQ8) +#define F0900_P1_EQUA_ACCQ8 0xf47f01ff + +/*P1_NNOSDATAT1*/ +#define R0900_P1_NNOSDATAT1 0xf480 +#define NNOSDATAT1 REGx(R0900_P1_NNOSDATAT1) +#define F0900_P1_NOSDATAT_NORMED1 0xf48000ff +#define NOSDATAT_NORMED1 FLDx(F0900_P1_NOSDATAT_NORMED1) + +/*P1_NNOSDATAT0*/ +#define R0900_P1_NNOSDATAT0 0xf481 +#define NNOSDATAT0 REGx(R0900_P1_NNOSDATAT0) +#define F0900_P1_NOSDATAT_NORMED0 0xf48100ff +#define NOSDATAT_NORMED0 FLDx(F0900_P1_NOSDATAT_NORMED0) + +/*P1_NNOSDATA1*/ +#define R0900_P1_NNOSDATA1 0xf482 +#define NNOSDATA1 REGx(R0900_P1_NNOSDATA1) +#define F0900_P1_NOSDATA_NORMED1 0xf48200ff + +/*P1_NNOSDATA0*/ +#define R0900_P1_NNOSDATA0 0xf483 +#define NNOSDATA0 REGx(R0900_P1_NNOSDATA0) +#define F0900_P1_NOSDATA_NORMED0 0xf48300ff + +/*P1_NNOSPLHT1*/ +#define R0900_P1_NNOSPLHT1 0xf484 +#define NNOSPLHT1 REGx(R0900_P1_NNOSPLHT1) +#define F0900_P1_NOSPLHT_NORMED1 0xf48400ff +#define NOSPLHT_NORMED1 FLDx(F0900_P1_NOSPLHT_NORMED1) + +/*P1_NNOSPLHT0*/ +#define R0900_P1_NNOSPLHT0 0xf485 +#define NNOSPLHT0 REGx(R0900_P1_NNOSPLHT0) +#define F0900_P1_NOSPLHT_NORMED0 0xf48500ff +#define NOSPLHT_NORMED0 FLDx(F0900_P1_NOSPLHT_NORMED0) + +/*P1_NNOSPLH1*/ +#define R0900_P1_NNOSPLH1 0xf486 +#define NNOSPLH1 REGx(R0900_P1_NNOSPLH1) +#define F0900_P1_NOSPLH_NORMED1 0xf48600ff + +/*P1_NNOSPLH0*/ +#define R0900_P1_NNOSPLH0 0xf487 +#define NNOSPLH0 REGx(R0900_P1_NNOSPLH0) +#define F0900_P1_NOSPLH_NORMED0 0xf48700ff + +/*P1_NOSDATAT1*/ +#define R0900_P1_NOSDATAT1 0xf488 +#define NOSDATAT1 REGx(R0900_P1_NOSDATAT1) +#define F0900_P1_NOSDATAT_UNNORMED1 0xf48800ff + +/*P1_NOSDATAT0*/ +#define R0900_P1_NOSDATAT0 0xf489 +#define NOSDATAT0 REGx(R0900_P1_NOSDATAT0) +#define F0900_P1_NOSDATAT_UNNORMED0 0xf48900ff + +/*P1_NOSDATA1*/ +#define R0900_P1_NOSDATA1 0xf48a +#define NOSDATA1 REGx(R0900_P1_NOSDATA1) +#define F0900_P1_NOSDATA_UNNORMED1 0xf48a00ff + +/*P1_NOSDATA0*/ +#define R0900_P1_NOSDATA0 0xf48b +#define NOSDATA0 REGx(R0900_P1_NOSDATA0) +#define F0900_P1_NOSDATA_UNNORMED0 0xf48b00ff + +/*P1_NOSPLHT1*/ +#define R0900_P1_NOSPLHT1 0xf48c +#define NOSPLHT1 REGx(R0900_P1_NOSPLHT1) +#define F0900_P1_NOSPLHT_UNNORMED1 0xf48c00ff + +/*P1_NOSPLHT0*/ +#define R0900_P1_NOSPLHT0 0xf48d +#define NOSPLHT0 REGx(R0900_P1_NOSPLHT0) +#define F0900_P1_NOSPLHT_UNNORMED0 0xf48d00ff + +/*P1_NOSPLH1*/ +#define R0900_P1_NOSPLH1 0xf48e +#define NOSPLH1 REGx(R0900_P1_NOSPLH1) +#define F0900_P1_NOSPLH_UNNORMED1 0xf48e00ff + +/*P1_NOSPLH0*/ +#define R0900_P1_NOSPLH0 0xf48f +#define NOSPLH0 REGx(R0900_P1_NOSPLH0) +#define F0900_P1_NOSPLH_UNNORMED0 0xf48f00ff + +/*P1_CAR2CFG*/ +#define R0900_P1_CAR2CFG 0xf490 +#define CAR2CFG REGx(R0900_P1_CAR2CFG) +#define F0900_P1_CARRIER3_DISABLE 0xf4900040 +#define F0900_P1_ROTA2ON 0xf4900004 +#define F0900_P1_PH_DET_ALGO2 0xf4900003 + +/*P1_CFR2CFR1*/ +#define R0900_P1_CFR2CFR1 0xf491 +#define CFR2CFR1 REGx(R0900_P1_CFR2CFR1) +#define F0900_P1_CFR2TOCFR1_DVBS1 0xf49100c0 +#define F0900_P1_EN_S2CAR2CENTER 0xf4910020 +#define F0900_P1_DIS_BCHERRCFR2 0xf4910010 +#define F0900_P1_CFR2TOCFR1_BETA 0xf4910007 + +/*P1_CFR22*/ +#define R0900_P1_CFR22 0xf493 +#define CFR22 REGx(R0900_P1_CFR22) +#define F0900_P1_CAR2_FREQ2 0xf49301ff + +/*P1_CFR21*/ +#define R0900_P1_CFR21 0xf494 +#define CFR21 REGx(R0900_P1_CFR21) +#define F0900_P1_CAR2_FREQ1 0xf49400ff + +/*P1_CFR20*/ +#define R0900_P1_CFR20 0xf495 +#define CFR20 REGx(R0900_P1_CFR20) +#define F0900_P1_CAR2_FREQ0 0xf49500ff + +/*P1_ACLC2S2Q*/ +#define R0900_P1_ACLC2S2Q 0xf497 +#define ACLC2S2Q REGx(R0900_P1_ACLC2S2Q) +#define F0900_P1_ENAB_SPSKSYMB 0xf4970080 +#define F0900_P1_CAR2S2_Q_ALPH_M 0xf4970030 +#define F0900_P1_CAR2S2_Q_ALPH_E 0xf497000f + +/*P1_ACLC2S28*/ +#define R0900_P1_ACLC2S28 0xf498 +#define ACLC2S28 REGx(R0900_P1_ACLC2S28) +#define F0900_P1_OLDI3Q_MODE 0xf4980080 +#define F0900_P1_CAR2S2_8_ALPH_M 0xf4980030 +#define F0900_P1_CAR2S2_8_ALPH_E 0xf498000f + +/*P1_ACLC2S216A*/ +#define R0900_P1_ACLC2S216A 0xf499 +#define ACLC2S216A REGx(R0900_P1_ACLC2S216A) +#define F0900_P1_DIS_C3STOPA2 0xf4990080 +#define F0900_P1_CAR2S2_16ADERAT 0xf4990040 +#define F0900_P1_CAR2S2_16A_ALPH_M 0xf4990030 +#define F0900_P1_CAR2S2_16A_ALPH_E 0xf499000f + +/*P1_ACLC2S232A*/ +#define R0900_P1_ACLC2S232A 0xf49a +#define ACLC2S232A REGx(R0900_P1_ACLC2S232A) +#define F0900_P1_CAR2S2_32ADERAT 0xf49a0040 +#define F0900_P1_CAR2S2_32A_ALPH_M 0xf49a0030 +#define F0900_P1_CAR2S2_32A_ALPH_E 0xf49a000f + +/*P1_BCLC2S2Q*/ +#define R0900_P1_BCLC2S2Q 0xf49c +#define BCLC2S2Q REGx(R0900_P1_BCLC2S2Q) +#define F0900_P1_CAR2S2_Q_BETA_M 0xf49c0030 +#define F0900_P1_CAR2S2_Q_BETA_E 0xf49c000f + +/*P1_BCLC2S28*/ +#define R0900_P1_BCLC2S28 0xf49d +#define BCLC2S28 REGx(R0900_P1_BCLC2S28) +#define F0900_P1_CAR2S2_8_BETA_M 0xf49d0030 +#define F0900_P1_CAR2S2_8_BETA_E 0xf49d000f + +/*P1_BCLC2S216A*/ +#define R0900_P1_BCLC2S216A 0xf49e +#define BCLC2S216A REGx(R0900_P1_BCLC2S216A) + +/*P1_BCLC2S232A*/ +#define R0900_P1_BCLC2S232A 0xf49f +#define BCLC2S232A REGx(R0900_P1_BCLC2S232A) + +/*P1_PLROOT2*/ +#define R0900_P1_PLROOT2 0xf4ac +#define PLROOT2 REGx(R0900_P1_PLROOT2) +#define F0900_P1_PLSCRAMB_MODE 0xf4ac000c +#define F0900_P1_PLSCRAMB_ROOT2 0xf4ac0003 + +/*P1_PLROOT1*/ +#define R0900_P1_PLROOT1 0xf4ad +#define PLROOT1 REGx(R0900_P1_PLROOT1) +#define F0900_P1_PLSCRAMB_ROOT1 0xf4ad00ff + +/*P1_PLROOT0*/ +#define R0900_P1_PLROOT0 0xf4ae +#define PLROOT0 REGx(R0900_P1_PLROOT0) +#define F0900_P1_PLSCRAMB_ROOT0 0xf4ae00ff + +/*P1_MODCODLST0*/ +#define R0900_P1_MODCODLST0 0xf4b0 +#define MODCODLST0 REGx(R0900_P1_MODCODLST0) + +/*P1_MODCODLST1*/ +#define R0900_P1_MODCODLST1 0xf4b1 +#define MODCODLST1 REGx(R0900_P1_MODCODLST1) +#define F0900_P1_DIS_MODCOD29 0xf4b100f0 +#define F0900_P1_DIS_32PSK_9_10 0xf4b1000f + +/*P1_MODCODLST2*/ +#define R0900_P1_MODCODLST2 0xf4b2 +#define MODCODLST2 REGx(R0900_P1_MODCODLST2) +#define F0900_P1_DIS_32PSK_8_9 0xf4b200f0 +#define F0900_P1_DIS_32PSK_5_6 0xf4b2000f + +/*P1_MODCODLST3*/ +#define R0900_P1_MODCODLST3 0xf4b3 +#define MODCODLST3 REGx(R0900_P1_MODCODLST3) +#define F0900_P1_DIS_32PSK_4_5 0xf4b300f0 +#define F0900_P1_DIS_32PSK_3_4 0xf4b3000f + +/*P1_MODCODLST4*/ +#define R0900_P1_MODCODLST4 0xf4b4 +#define MODCODLST4 REGx(R0900_P1_MODCODLST4) +#define F0900_P1_DIS_16PSK_9_10 0xf4b400f0 +#define F0900_P1_DIS_16PSK_8_9 0xf4b4000f + +/*P1_MODCODLST5*/ +#define R0900_P1_MODCODLST5 0xf4b5 +#define MODCODLST5 REGx(R0900_P1_MODCODLST5) +#define F0900_P1_DIS_16PSK_5_6 0xf4b500f0 +#define F0900_P1_DIS_16PSK_4_5 0xf4b5000f + +/*P1_MODCODLST6*/ +#define R0900_P1_MODCODLST6 0xf4b6 +#define MODCODLST6 REGx(R0900_P1_MODCODLST6) +#define F0900_P1_DIS_16PSK_3_4 0xf4b600f0 +#define F0900_P1_DIS_16PSK_2_3 0xf4b6000f + +/*P1_MODCODLST7*/ +#define R0900_P1_MODCODLST7 0xf4b7 +#define MODCODLST7 REGx(R0900_P1_MODCODLST7) +#define F0900_P1_DIS_8P_9_10 0xf4b700f0 +#define F0900_P1_DIS_8P_8_9 0xf4b7000f + +/*P1_MODCODLST8*/ +#define R0900_P1_MODCODLST8 0xf4b8 +#define MODCODLST8 REGx(R0900_P1_MODCODLST8) +#define F0900_P1_DIS_8P_5_6 0xf4b800f0 +#define F0900_P1_DIS_8P_3_4 0xf4b8000f + +/*P1_MODCODLST9*/ +#define R0900_P1_MODCODLST9 0xf4b9 +#define MODCODLST9 REGx(R0900_P1_MODCODLST9) +#define F0900_P1_DIS_8P_2_3 0xf4b900f0 +#define F0900_P1_DIS_8P_3_5 0xf4b9000f + +/*P1_MODCODLSTA*/ +#define R0900_P1_MODCODLSTA 0xf4ba +#define MODCODLSTA REGx(R0900_P1_MODCODLSTA) +#define F0900_P1_DIS_QP_9_10 0xf4ba00f0 +#define F0900_P1_DIS_QP_8_9 0xf4ba000f + +/*P1_MODCODLSTB*/ +#define R0900_P1_MODCODLSTB 0xf4bb +#define MODCODLSTB REGx(R0900_P1_MODCODLSTB) +#define F0900_P1_DIS_QP_5_6 0xf4bb00f0 +#define F0900_P1_DIS_QP_4_5 0xf4bb000f + +/*P1_MODCODLSTC*/ +#define R0900_P1_MODCODLSTC 0xf4bc +#define MODCODLSTC REGx(R0900_P1_MODCODLSTC) +#define F0900_P1_DIS_QP_3_4 0xf4bc00f0 +#define F0900_P1_DIS_QP_2_3 0xf4bc000f + +/*P1_MODCODLSTD*/ +#define R0900_P1_MODCODLSTD 0xf4bd +#define MODCODLSTD REGx(R0900_P1_MODCODLSTD) +#define F0900_P1_DIS_QP_3_5 0xf4bd00f0 +#define F0900_P1_DIS_QP_1_2 0xf4bd000f + +/*P1_MODCODLSTE*/ +#define R0900_P1_MODCODLSTE 0xf4be +#define MODCODLSTE REGx(R0900_P1_MODCODLSTE) +#define F0900_P1_DIS_QP_2_5 0xf4be00f0 +#define F0900_P1_DIS_QP_1_3 0xf4be000f + +/*P1_MODCODLSTF*/ +#define R0900_P1_MODCODLSTF 0xf4bf +#define MODCODLSTF REGx(R0900_P1_MODCODLSTF) +#define F0900_P1_DIS_QP_1_4 0xf4bf00f0 + +/*P1_GAUSSR0*/ +#define R0900_P1_GAUSSR0 0xf4c0 +#define GAUSSR0 REGx(R0900_P1_GAUSSR0) +#define F0900_P1_EN_CCIMODE 0xf4c00080 +#define F0900_P1_R0_GAUSSIEN 0xf4c0007f + +/*P1_CCIR0*/ +#define R0900_P1_CCIR0 0xf4c1 +#define CCIR0 REGx(R0900_P1_CCIR0) +#define F0900_P1_CCIDETECT_PLHONLY 0xf4c10080 +#define F0900_P1_R0_CCI 0xf4c1007f + +/*P1_CCIQUANT*/ +#define R0900_P1_CCIQUANT 0xf4c2 +#define CCIQUANT REGx(R0900_P1_CCIQUANT) +#define F0900_P1_CCI_BETA 0xf4c200e0 +#define F0900_P1_CCI_QUANT 0xf4c2001f + +/*P1_CCITHRES*/ +#define R0900_P1_CCITHRES 0xf4c3 +#define CCITHRES REGx(R0900_P1_CCITHRES) +#define F0900_P1_CCI_THRESHOLD 0xf4c300ff + +/*P1_CCIACC*/ +#define R0900_P1_CCIACC 0xf4c4 +#define CCIACC REGx(R0900_P1_CCIACC) +#define F0900_P1_CCI_VALUE 0xf4c400ff + +/*P1_DMDRESCFG*/ +#define R0900_P1_DMDRESCFG 0xf4c6 +#define DMDRESCFG REGx(R0900_P1_DMDRESCFG) +#define F0900_P1_DMDRES_RESET 0xf4c60080 +#define F0900_P1_DMDRES_STRALL 0xf4c60008 +#define F0900_P1_DMDRES_NEWONLY 0xf4c60004 +#define F0900_P1_DMDRES_NOSTORE 0xf4c60002 + +/*P1_DMDRESADR*/ +#define R0900_P1_DMDRESADR 0xf4c7 +#define DMDRESADR REGx(R0900_P1_DMDRESADR) +#define F0900_P1_DMDRES_VALIDCFR 0xf4c70040 +#define F0900_P1_DMDRES_MEMFULL 0xf4c70030 +#define F0900_P1_DMDRES_RESNBR 0xf4c7000f + +/*P1_DMDRESDATA7*/ +#define R0900_P1_DMDRESDATA7 0xf4c8 +#define F0900_P1_DMDRES_DATA7 0xf4c800ff + +/*P1_DMDRESDATA6*/ +#define R0900_P1_DMDRESDATA6 0xf4c9 +#define F0900_P1_DMDRES_DATA6 0xf4c900ff + +/*P1_DMDRESDATA5*/ +#define R0900_P1_DMDRESDATA5 0xf4ca +#define F0900_P1_DMDRES_DATA5 0xf4ca00ff + +/*P1_DMDRESDATA4*/ +#define R0900_P1_DMDRESDATA4 0xf4cb +#define F0900_P1_DMDRES_DATA4 0xf4cb00ff + +/*P1_DMDRESDATA3*/ +#define R0900_P1_DMDRESDATA3 0xf4cc +#define F0900_P1_DMDRES_DATA3 0xf4cc00ff + +/*P1_DMDRESDATA2*/ +#define R0900_P1_DMDRESDATA2 0xf4cd +#define F0900_P1_DMDRES_DATA2 0xf4cd00ff + +/*P1_DMDRESDATA1*/ +#define R0900_P1_DMDRESDATA1 0xf4ce +#define F0900_P1_DMDRES_DATA1 0xf4ce00ff + +/*P1_DMDRESDATA0*/ +#define R0900_P1_DMDRESDATA0 0xf4cf +#define F0900_P1_DMDRES_DATA0 0xf4cf00ff + +/*P1_FFEI1*/ +#define R0900_P1_FFEI1 0xf4d0 +#define FFEI1 REGx(R0900_P1_FFEI1) +#define F0900_P1_FFE_ACCI1 0xf4d001ff + +/*P1_FFEQ1*/ +#define R0900_P1_FFEQ1 0xf4d1 +#define FFEQ1 REGx(R0900_P1_FFEQ1) +#define F0900_P1_FFE_ACCQ1 0xf4d101ff + +/*P1_FFEI2*/ +#define R0900_P1_FFEI2 0xf4d2 +#define FFEI2 REGx(R0900_P1_FFEI2) +#define F0900_P1_FFE_ACCI2 0xf4d201ff + +/*P1_FFEQ2*/ +#define R0900_P1_FFEQ2 0xf4d3 +#define FFEQ2 REGx(R0900_P1_FFEQ2) +#define F0900_P1_FFE_ACCQ2 0xf4d301ff + +/*P1_FFEI3*/ +#define R0900_P1_FFEI3 0xf4d4 +#define FFEI3 REGx(R0900_P1_FFEI3) +#define F0900_P1_FFE_ACCI3 0xf4d401ff + +/*P1_FFEQ3*/ +#define R0900_P1_FFEQ3 0xf4d5 +#define FFEQ3 REGx(R0900_P1_FFEQ3) +#define F0900_P1_FFE_ACCQ3 0xf4d501ff + +/*P1_FFEI4*/ +#define R0900_P1_FFEI4 0xf4d6 +#define FFEI4 REGx(R0900_P1_FFEI4) +#define F0900_P1_FFE_ACCI4 0xf4d601ff + +/*P1_FFEQ4*/ +#define R0900_P1_FFEQ4 0xf4d7 +#define FFEQ4 REGx(R0900_P1_FFEQ4) +#define F0900_P1_FFE_ACCQ4 0xf4d701ff + +/*P1_FFECFG*/ +#define R0900_P1_FFECFG 0xf4d8 +#define FFECFG REGx(R0900_P1_FFECFG) +#define F0900_P1_EQUALFFE_ON 0xf4d80040 +#define F0900_P1_MU_EQUALFFE 0xf4d80007 + +/*P1_TNRCFG*/ +#define R0900_P1_TNRCFG 0xf4e0 +#define TNRCFG REGx(R0900_P1_TNRCFG) +#define F0900_P1_TUN_ACKFAIL 0xf4e00080 +#define F0900_P1_TUN_TYPE 0xf4e00070 +#define F0900_P1_TUN_SECSTOP 0xf4e00008 +#define F0900_P1_TUN_VCOSRCH 0xf4e00004 +#define F0900_P1_TUN_MADDRESS 0xf4e00003 + +/*P1_TNRCFG2*/ +#define R0900_P1_TNRCFG2 0xf4e1 +#define TNRCFG2 REGx(R0900_P1_TNRCFG2) +#define F0900_P1_TUN_IQSWAP 0xf4e10080 +#define F0900_P1_DIS_BWCALC 0xf4e10004 +#define F0900_P1_SHORT_WAITSTATES 0xf4e10002 + +/*P1_TNRXTAL*/ +#define R0900_P1_TNRXTAL 0xf4e4 +#define TNRXTAL REGx(R0900_P1_TNRXTAL) +#define F0900_P1_TUN_XTALFREQ 0xf4e4001f + +/*P1_TNRSTEPS*/ +#define R0900_P1_TNRSTEPS 0xf4e7 +#define TNRSTEPS REGx(R0900_P1_TNRSTEPS) +#define F0900_P1_TUNER_BW0P125 0xf4e70080 +#define F0900_P1_BWINC_OFFSET 0xf4e70170 +#define F0900_P1_SOFTSTEP_RNG 0xf4e70008 +#define F0900_P1_TUN_BWOFFSET 0xf4e70007 + +/*P1_TNRGAIN*/ +#define R0900_P1_TNRGAIN 0xf4e8 +#define TNRGAIN REGx(R0900_P1_TNRGAIN) +#define F0900_P1_TUN_KDIVEN 0xf4e800c0 +#define F0900_P1_STB6X00_OCK 0xf4e80030 +#define F0900_P1_TUN_GAIN 0xf4e8000f + +/*P1_TNRRF1*/ +#define R0900_P1_TNRRF1 0xf4e9 +#define TNRRF1 REGx(R0900_P1_TNRRF1) +#define F0900_P1_TUN_RFFREQ2 0xf4e900ff +#define TUN_RFFREQ2 FLDx(F0900_P1_TUN_RFFREQ2) + +/*P1_TNRRF0*/ +#define R0900_P1_TNRRF0 0xf4ea +#define TNRRF0 REGx(R0900_P1_TNRRF0) +#define F0900_P1_TUN_RFFREQ1 0xf4ea00ff +#define TUN_RFFREQ1 FLDx(F0900_P1_TUN_RFFREQ1) + +/*P1_TNRBW*/ +#define R0900_P1_TNRBW 0xf4eb +#define TNRBW REGx(R0900_P1_TNRBW) +#define F0900_P1_TUN_RFFREQ0 0xf4eb00c0 +#define TUN_RFFREQ0 FLDx(F0900_P1_TUN_RFFREQ0) +#define F0900_P1_TUN_BW 0xf4eb003f +#define TUN_BW FLDx(F0900_P1_TUN_BW) + +/*P1_TNRADJ*/ +#define R0900_P1_TNRADJ 0xf4ec +#define TNRADJ REGx(R0900_P1_TNRADJ) +#define F0900_P1_STB61X0_CALTIME 0xf4ec0040 + +/*P1_TNRCTL2*/ +#define R0900_P1_TNRCTL2 0xf4ed +#define TNRCTL2 REGx(R0900_P1_TNRCTL2) +#define F0900_P1_STB61X0_RCCKOFF 0xf4ed0080 +#define F0900_P1_STB61X0_ICP_SDOFF 0xf4ed0040 +#define F0900_P1_STB61X0_DCLOOPOFF 0xf4ed0020 +#define F0900_P1_STB61X0_REFOUTSEL 0xf4ed0010 +#define F0900_P1_STB61X0_CALOFF 0xf4ed0008 +#define F0900_P1_STB6XX0_LPT_BEN 0xf4ed0004 +#define F0900_P1_STB6XX0_RX_OSCP 0xf4ed0002 +#define F0900_P1_STB6XX0_SYN 0xf4ed0001 + +/*P1_TNRCFG3*/ +#define R0900_P1_TNRCFG3 0xf4ee +#define TNRCFG3 REGx(R0900_P1_TNRCFG3) +#define F0900_P1_TUN_PLLFREQ 0xf4ee001c +#define F0900_P1_TUN_I2CFREQ_MODE 0xf4ee0003 + +/*P1_TNRLAUNCH*/ +#define R0900_P1_TNRLAUNCH 0xf4f0 +#define TNRLAUNCH REGx(R0900_P1_TNRLAUNCH) + +/*P1_TNRLD*/ +#define R0900_P1_TNRLD 0xf4f0 +#define TNRLD REGx(R0900_P1_TNRLD) +#define F0900_P1_TUNLD_VCOING 0xf4f00080 +#define F0900_P1_TUN_REG1FAIL 0xf4f00040 +#define F0900_P1_TUN_REG2FAIL 0xf4f00020 +#define F0900_P1_TUN_REG3FAIL 0xf4f00010 +#define F0900_P1_TUN_REG4FAIL 0xf4f00008 +#define F0900_P1_TUN_REG5FAIL 0xf4f00004 +#define F0900_P1_TUN_BWING 0xf4f00002 +#define F0900_P1_TUN_LOCKED 0xf4f00001 + +/*P1_TNROBSL*/ +#define R0900_P1_TNROBSL 0xf4f6 +#define TNROBSL REGx(R0900_P1_TNROBSL) +#define F0900_P1_TUN_I2CABORTED 0xf4f60080 +#define F0900_P1_TUN_LPEN 0xf4f60040 +#define F0900_P1_TUN_FCCK 0xf4f60020 +#define F0900_P1_TUN_I2CLOCKED 0xf4f60010 +#define F0900_P1_TUN_PROGDONE 0xf4f6000c +#define F0900_P1_TUN_RFRESTE1 0xf4f60003 +#define TUN_RFRESTE1 FLDx(F0900_P1_TUN_RFRESTE1) + +/*P1_TNRRESTE*/ +#define R0900_P1_TNRRESTE 0xf4f7 +#define TNRRESTE REGx(R0900_P1_TNRRESTE) +#define F0900_P1_TUN_RFRESTE0 0xf4f700ff +#define TUN_RFRESTE0 FLDx(F0900_P1_TUN_RFRESTE0) + +/*P1_SMAPCOEF7*/ +#define R0900_P1_SMAPCOEF7 0xf500 +#define SMAPCOEF7 REGx(R0900_P1_SMAPCOEF7) +#define F0900_P1_DIS_QSCALE 0xf5000080 +#define F0900_P1_SMAPCOEF_Q_LLR12 0xf500017f + +/*P1_SMAPCOEF6*/ +#define R0900_P1_SMAPCOEF6 0xf501 +#define SMAPCOEF6 REGx(R0900_P1_SMAPCOEF6) +#define F0900_P1_ADJ_8PSKLLR1 0xf5010004 +#define F0900_P1_OLD_8PSKLLR1 0xf5010002 +#define F0900_P1_DIS_AB8PSK 0xf5010001 + +/*P1_SMAPCOEF5*/ +#define R0900_P1_SMAPCOEF5 0xf502 +#define SMAPCOEF5 REGx(R0900_P1_SMAPCOEF5) +#define F0900_P1_DIS_8SCALE 0xf5020080 +#define F0900_P1_SMAPCOEF_8P_LLR23 0xf502017f + +/*P1_NCO2MAX1*/ +#define R0900_P1_NCO2MAX1 0xf514 +#define NCO2MAX1 REGx(R0900_P1_NCO2MAX1) +#define F0900_P1_TETA2_MAXVABS1 0xf51400ff + +/*P1_NCO2MAX0*/ +#define R0900_P1_NCO2MAX0 0xf515 +#define NCO2MAX0 REGx(R0900_P1_NCO2MAX0) +#define F0900_P1_TETA2_MAXVABS0 0xf51500ff + +/*P1_NCO2FR1*/ +#define R0900_P1_NCO2FR1 0xf516 +#define NCO2FR1 REGx(R0900_P1_NCO2FR1) +#define F0900_P1_NCO2FINAL_ANGLE1 0xf51600ff + +/*P1_NCO2FR0*/ +#define R0900_P1_NCO2FR0 0xf517 +#define NCO2FR0 REGx(R0900_P1_NCO2FR0) +#define F0900_P1_NCO2FINAL_ANGLE0 0xf51700ff + +/*P1_CFR2AVRGE1*/ +#define R0900_P1_CFR2AVRGE1 0xf518 +#define CFR2AVRGE1 REGx(R0900_P1_CFR2AVRGE1) +#define F0900_P1_I2C_CFR2AVERAGE1 0xf51800ff + +/*P1_CFR2AVRGE0*/ +#define R0900_P1_CFR2AVRGE0 0xf519 +#define CFR2AVRGE0 REGx(R0900_P1_CFR2AVRGE0) +#define F0900_P1_I2C_CFR2AVERAGE0 0xf51900ff + +/*P1_DMDPLHSTAT*/ +#define R0900_P1_DMDPLHSTAT 0xf520 +#define DMDPLHSTAT REGx(R0900_P1_DMDPLHSTAT) +#define F0900_P1_PLH_STATISTIC 0xf52000ff + +/*P1_LOCKTIME3*/ +#define R0900_P1_LOCKTIME3 0xf522 +#define LOCKTIME3 REGx(R0900_P1_LOCKTIME3) +#define F0900_P1_DEMOD_LOCKTIME3 0xf52200ff + +/*P1_LOCKTIME2*/ +#define R0900_P1_LOCKTIME2 0xf523 +#define LOCKTIME2 REGx(R0900_P1_LOCKTIME2) +#define F0900_P1_DEMOD_LOCKTIME2 0xf52300ff + +/*P1_LOCKTIME1*/ +#define R0900_P1_LOCKTIME1 0xf524 +#define LOCKTIME1 REGx(R0900_P1_LOCKTIME1) +#define F0900_P1_DEMOD_LOCKTIME1 0xf52400ff + +/*P1_LOCKTIME0*/ +#define R0900_P1_LOCKTIME0 0xf525 +#define LOCKTIME0 REGx(R0900_P1_LOCKTIME0) +#define F0900_P1_DEMOD_LOCKTIME0 0xf52500ff + +/*P1_VITSCALE*/ +#define R0900_P1_VITSCALE 0xf532 +#define VITSCALE REGx(R0900_P1_VITSCALE) +#define F0900_P1_NVTH_NOSRANGE 0xf5320080 +#define F0900_P1_VERROR_MAXMODE 0xf5320040 +#define F0900_P1_NSLOWSN_LOCKED 0xf5320008 +#define F0900_P1_DIS_RSFLOCK 0xf5320002 + +/*P1_FECM*/ +#define R0900_P1_FECM 0xf533 +#define FECM REGx(R0900_P1_FECM) +#define F0900_P1_DSS_DVB 0xf5330080 +#define DSS_DVB FLDx(F0900_P1_DSS_DVB) +#define F0900_P1_DSS_SRCH 0xf5330010 +#define F0900_P1_SYNCVIT 0xf5330002 +#define F0900_P1_IQINV 0xf5330001 +#define IQINV FLDx(F0900_P1_IQINV) + +/*P1_VTH12*/ +#define R0900_P1_VTH12 0xf534 +#define VTH12 REGx(R0900_P1_VTH12) +#define F0900_P1_VTH12 0xf53400ff + +/*P1_VTH23*/ +#define R0900_P1_VTH23 0xf535 +#define VTH23 REGx(R0900_P1_VTH23) +#define F0900_P1_VTH23 0xf53500ff + +/*P1_VTH34*/ +#define R0900_P1_VTH34 0xf536 +#define VTH34 REGx(R0900_P1_VTH34) +#define F0900_P1_VTH34 0xf53600ff + +/*P1_VTH56*/ +#define R0900_P1_VTH56 0xf537 +#define VTH56 REGx(R0900_P1_VTH56) +#define F0900_P1_VTH56 0xf53700ff + +/*P1_VTH67*/ +#define R0900_P1_VTH67 0xf538 +#define VTH67 REGx(R0900_P1_VTH67) +#define F0900_P1_VTH67 0xf53800ff + +/*P1_VTH78*/ +#define R0900_P1_VTH78 0xf539 +#define VTH78 REGx(R0900_P1_VTH78) +#define F0900_P1_VTH78 0xf53900ff + +/*P1_VITCURPUN*/ +#define R0900_P1_VITCURPUN 0xf53a +#define VITCURPUN REGx(R0900_P1_VITCURPUN) +#define F0900_P1_VIT_CURPUN 0xf53a001f +#define VIT_CURPUN FLDx(F0900_P1_VIT_CURPUN) + +/*P1_VERROR*/ +#define R0900_P1_VERROR 0xf53b +#define VERROR REGx(R0900_P1_VERROR) +#define F0900_P1_REGERR_VIT 0xf53b00ff + +/*P1_PRVIT*/ +#define R0900_P1_PRVIT 0xf53c +#define PRVIT REGx(R0900_P1_PRVIT) +#define F0900_P1_DIS_VTHLOCK 0xf53c0040 +#define F0900_P1_E7_8VIT 0xf53c0020 +#define F0900_P1_E6_7VIT 0xf53c0010 +#define F0900_P1_E5_6VIT 0xf53c0008 +#define F0900_P1_E3_4VIT 0xf53c0004 +#define F0900_P1_E2_3VIT 0xf53c0002 +#define F0900_P1_E1_2VIT 0xf53c0001 + +/*P1_VAVSRVIT*/ +#define R0900_P1_VAVSRVIT 0xf53d +#define VAVSRVIT REGx(R0900_P1_VAVSRVIT) +#define F0900_P1_AMVIT 0xf53d0080 +#define F0900_P1_FROZENVIT 0xf53d0040 +#define F0900_P1_SNVIT 0xf53d0030 +#define F0900_P1_TOVVIT 0xf53d000c +#define F0900_P1_HYPVIT 0xf53d0003 + +/*P1_VSTATUSVIT*/ +#define R0900_P1_VSTATUSVIT 0xf53e +#define VSTATUSVIT REGx(R0900_P1_VSTATUSVIT) +#define F0900_P1_PRFVIT 0xf53e0010 +#define PRFVIT FLDx(F0900_P1_PRFVIT) +#define F0900_P1_LOCKEDVIT 0xf53e0008 +#define LOCKEDVIT FLDx(F0900_P1_LOCKEDVIT) + +/*P1_VTHINUSE*/ +#define R0900_P1_VTHINUSE 0xf53f +#define VTHINUSE REGx(R0900_P1_VTHINUSE) +#define F0900_P1_VIT_INUSE 0xf53f00ff + +/*P1_KDIV12*/ +#define R0900_P1_KDIV12 0xf540 +#define KDIV12 REGx(R0900_P1_KDIV12) +#define F0900_P1_K_DIVIDER_12 0xf540007f + +/*P1_KDIV23*/ +#define R0900_P1_KDIV23 0xf541 +#define KDIV23 REGx(R0900_P1_KDIV23) +#define F0900_P1_K_DIVIDER_23 0xf541007f + +/*P1_KDIV34*/ +#define R0900_P1_KDIV34 0xf542 +#define KDIV34 REGx(R0900_P1_KDIV34) +#define F0900_P1_K_DIVIDER_34 0xf542007f + +/*P1_KDIV56*/ +#define R0900_P1_KDIV56 0xf543 +#define KDIV56 REGx(R0900_P1_KDIV56) +#define F0900_P1_K_DIVIDER_56 0xf543007f + +/*P1_KDIV67*/ +#define R0900_P1_KDIV67 0xf544 +#define KDIV67 REGx(R0900_P1_KDIV67) +#define F0900_P1_K_DIVIDER_67 0xf544007f + +/*P1_KDIV78*/ +#define R0900_P1_KDIV78 0xf545 +#define KDIV78 REGx(R0900_P1_KDIV78) +#define F0900_P1_K_DIVIDER_78 0xf545007f + +/*P1_PDELCTRL1*/ +#define R0900_P1_PDELCTRL1 0xf550 +#define PDELCTRL1 REGx(R0900_P1_PDELCTRL1) +#define F0900_P1_INV_MISMASK 0xf5500080 +#define INV_MISMASK FLDx(F0900_P1_INV_MISMASK) +#define F0900_P1_FILTER_EN 0xf5500020 +#define FILTER_EN FLDx(F0900_P1_FILTER_EN) +#define F0900_P1_EN_MIS00 0xf5500002 +#define EN_MIS00 FLDx(F0900_P1_EN_MIS00) +#define F0900_P1_ALGOSWRST 0xf5500001 +#define ALGOSWRST FLDx(F0900_P1_ALGOSWRST) + +/*P1_PDELCTRL2*/ +#define R0900_P1_PDELCTRL2 0xf551 +#define PDELCTRL2 REGx(R0900_P1_PDELCTRL2) +#define F0900_P1_RESET_UPKO_COUNT 0xf5510040 +#define RESET_UPKO_COUNT FLDx(F0900_P1_RESET_UPKO_COUNT) +#define F0900_P1_FRAME_MODE 0xf5510002 +#define F0900_P1_NOBCHERRFLG_USE 0xf5510001 + +/*P1_HYSTTHRESH*/ +#define R0900_P1_HYSTTHRESH 0xf554 +#define HYSTTHRESH REGx(R0900_P1_HYSTTHRESH) +#define F0900_P1_UNLCK_THRESH 0xf55400f0 +#define F0900_P1_DELIN_LCK_THRESH 0xf554000f + +/*P1_ISIENTRY*/ +#define R0900_P1_ISIENTRY 0xf55e +#define ISIENTRY REGx(R0900_P1_ISIENTRY) +#define F0900_P1_ISI_ENTRY 0xf55e00ff + +/*P1_ISIBITENA*/ +#define R0900_P1_ISIBITENA 0xf55f +#define ISIBITENA REGx(R0900_P1_ISIBITENA) +#define F0900_P1_ISI_BIT_EN 0xf55f00ff + +/*P1_MATSTR1*/ +#define R0900_P1_MATSTR1 0xf560 +#define MATSTR1 REGx(R0900_P1_MATSTR1) +#define F0900_P1_MATYPE_CURRENT1 0xf56000ff + +/*P1_MATSTR0*/ +#define R0900_P1_MATSTR0 0xf561 +#define MATSTR0 REGx(R0900_P1_MATSTR0) +#define F0900_P1_MATYPE_CURRENT0 0xf56100ff + +/*P1_UPLSTR1*/ +#define R0900_P1_UPLSTR1 0xf562 +#define UPLSTR1 REGx(R0900_P1_UPLSTR1) +#define F0900_P1_UPL_CURRENT1 0xf56200ff + +/*P1_UPLSTR0*/ +#define R0900_P1_UPLSTR0 0xf563 +#define UPLSTR0 REGx(R0900_P1_UPLSTR0) +#define F0900_P1_UPL_CURRENT0 0xf56300ff + +/*P1_DFLSTR1*/ +#define R0900_P1_DFLSTR1 0xf564 +#define DFLSTR1 REGx(R0900_P1_DFLSTR1) +#define F0900_P1_DFL_CURRENT1 0xf56400ff + +/*P1_DFLSTR0*/ +#define R0900_P1_DFLSTR0 0xf565 +#define DFLSTR0 REGx(R0900_P1_DFLSTR0) +#define F0900_P1_DFL_CURRENT0 0xf56500ff + +/*P1_SYNCSTR*/ +#define R0900_P1_SYNCSTR 0xf566 +#define SYNCSTR REGx(R0900_P1_SYNCSTR) +#define F0900_P1_SYNC_CURRENT 0xf56600ff + +/*P1_SYNCDSTR1*/ +#define R0900_P1_SYNCDSTR1 0xf567 +#define SYNCDSTR1 REGx(R0900_P1_SYNCDSTR1) +#define F0900_P1_SYNCD_CURRENT1 0xf56700ff + +/*P1_SYNCDSTR0*/ +#define R0900_P1_SYNCDSTR0 0xf568 +#define SYNCDSTR0 REGx(R0900_P1_SYNCDSTR0) +#define F0900_P1_SYNCD_CURRENT0 0xf56800ff + +/*P1_PDELSTATUS1*/ +#define R0900_P1_PDELSTATUS1 0xf569 +#define F0900_P1_PKTDELIN_DELOCK 0xf5690080 +#define F0900_P1_SYNCDUPDFL_BADDFL 0xf5690040 +#define F0900_P1_CONTINUOUS_STREAM 0xf5690020 +#define F0900_P1_UNACCEPTED_STREAM 0xf5690010 +#define F0900_P1_BCH_ERROR_FLAG 0xf5690008 +#define F0900_P1_PKTDELIN_LOCK 0xf5690002 +#define PKTDELIN_LOCK FLDx(F0900_P1_PKTDELIN_LOCK) +#define F0900_P1_FIRST_LOCK 0xf5690001 + +/*P1_PDELSTATUS2*/ +#define R0900_P1_PDELSTATUS2 0xf56a +#define F0900_P1_FRAME_MODCOD 0xf56a007c +#define F0900_P1_FRAME_TYPE 0xf56a0003 + +/*P1_BBFCRCKO1*/ +#define R0900_P1_BBFCRCKO1 0xf56b +#define BBFCRCKO1 REGx(R0900_P1_BBFCRCKO1) +#define F0900_P1_BBHCRC_KOCNT1 0xf56b00ff + +/*P1_BBFCRCKO0*/ +#define R0900_P1_BBFCRCKO0 0xf56c +#define BBFCRCKO0 REGx(R0900_P1_BBFCRCKO0) +#define F0900_P1_BBHCRC_KOCNT0 0xf56c00ff + +/*P1_UPCRCKO1*/ +#define R0900_P1_UPCRCKO1 0xf56d +#define UPCRCKO1 REGx(R0900_P1_UPCRCKO1) +#define F0900_P1_PKTCRC_KOCNT1 0xf56d00ff + +/*P1_UPCRCKO0*/ +#define R0900_P1_UPCRCKO0 0xf56e +#define UPCRCKO0 REGx(R0900_P1_UPCRCKO0) +#define F0900_P1_PKTCRC_KOCNT0 0xf56e00ff + +/*P1_PDELCTRL3*/ +#define R0900_P1_PDELCTRL3 0xf56f +#define PDELCTRL3 REGx(R0900_P1_PDELCTRL3) +#define F0900_P1_PKTDEL_CONTFAIL 0xf56f0080 +#define F0900_P1_NOFIFO_BCHERR 0xf56f0020 + +/*P1_TSSTATEM*/ +#define R0900_P1_TSSTATEM 0xf570 +#define TSSTATEM REGx(R0900_P1_TSSTATEM) +#define F0900_P1_TSDIL_ON 0xf5700080 +#define F0900_P1_TSRS_ON 0xf5700020 +#define F0900_P1_TSDESCRAMB_ON 0xf5700010 +#define F0900_P1_TSFRAME_MODE 0xf5700008 +#define F0900_P1_TS_DISABLE 0xf5700004 +#define F0900_P1_TSOUT_NOSYNC 0xf5700001 + +/*P1_TSCFGH*/ +#define R0900_P1_TSCFGH 0xf572 +#define TSCFGH REGx(R0900_P1_TSCFGH) +#define F0900_P1_TSFIFO_DVBCI 0xf5720080 +#define F0900_P1_TSFIFO_SERIAL 0xf5720040 +#define F0900_P1_TSFIFO_TEIUPDATE 0xf5720020 +#define F0900_P1_TSFIFO_DUTY50 0xf5720010 +#define F0900_P1_TSFIFO_HSGNLOUT 0xf5720008 +#define F0900_P1_TSFIFO_ERRMODE 0xf5720006 +#define F0900_P1_RST_HWARE 0xf5720001 +#define RST_HWARE FLDx(F0900_P1_RST_HWARE) + +/*P1_TSCFGM*/ +#define R0900_P1_TSCFGM 0xf573 +#define TSCFGM REGx(R0900_P1_TSCFGM) +#define F0900_P1_TSFIFO_MANSPEED 0xf57300c0 +#define F0900_P1_TSFIFO_PERMDATA 0xf5730020 +#define F0900_P1_TSFIFO_DPUNACT 0xf5730002 +#define F0900_P1_TSFIFO_INVDATA 0xf5730001 + +/*P1_TSCFGL*/ +#define R0900_P1_TSCFGL 0xf574 +#define TSCFGL REGx(R0900_P1_TSCFGL) +#define F0900_P1_TSFIFO_BCLKDEL1CK 0xf57400c0 +#define F0900_P1_BCHERROR_MODE 0xf5740030 +#define F0900_P1_TSFIFO_NSGNL2DATA 0xf5740008 +#define F0900_P1_TSFIFO_EMBINDVB 0xf5740004 +#define F0900_P1_TSFIFO_BITSPEED 0xf5740003 + +/*P1_TSINSDELH*/ +#define R0900_P1_TSINSDELH 0xf576 +#define TSINSDELH REGx(R0900_P1_TSINSDELH) +#define F0900_P1_TSDEL_SYNCBYTE 0xf5760080 +#define F0900_P1_TSDEL_XXHEADER 0xf5760040 +#define F0900_P1_TSDEL_BBHEADER 0xf5760020 +#define F0900_P1_TSDEL_DATAFIELD 0xf5760010 +#define F0900_P1_TSINSDEL_ISCR 0xf5760008 +#define F0900_P1_TSINSDEL_NPD 0xf5760004 +#define F0900_P1_TSINSDEL_RSPARITY 0xf5760002 +#define F0900_P1_TSINSDEL_CRC8 0xf5760001 + +/*P1_TSDIVN*/ +#define R0900_P1_TSDIVN 0xf579 +#define TSDIVN REGx(R0900_P1_TSDIVN) +#define F0900_P1_TSFIFO_SPEEDMODE 0xf57900c0 + +/*P1_TSCFG4*/ +#define R0900_P1_TSCFG4 0xf57a +#define TSCFG4 REGx(R0900_P1_TSCFG4) +#define F0900_P1_TSFIFO_TSSPEEDMODE 0xf57a00c0 + +/*P1_TSSPEED*/ +#define R0900_P1_TSSPEED 0xf580 +#define TSSPEED REGx(R0900_P1_TSSPEED) +#define F0900_P1_TSFIFO_OUTSPEED 0xf58000ff + +/*P1_TSSTATUS*/ +#define R0900_P1_TSSTATUS 0xf581 +#define TSSTATUS REGx(R0900_P1_TSSTATUS) +#define F0900_P1_TSFIFO_LINEOK 0xf5810080 +#define TSFIFO_LINEOK FLDx(F0900_P1_TSFIFO_LINEOK) +#define F0900_P1_TSFIFO_ERROR 0xf5810040 +#define F0900_P1_DIL_READY 0xf5810001 + +/*P1_TSSTATUS2*/ +#define R0900_P1_TSSTATUS2 0xf582 +#define TSSTATUS2 REGx(R0900_P1_TSSTATUS2) +#define F0900_P1_TSFIFO_DEMODSEL 0xf5820080 +#define F0900_P1_TSFIFOSPEED_STORE 0xf5820040 +#define F0900_P1_DILXX_RESET 0xf5820020 +#define F0900_P1_TSSERIAL_IMPOS 0xf5820010 +#define F0900_P1_SCRAMBDETECT 0xf5820002 + +/*P1_TSBITRATE1*/ +#define R0900_P1_TSBITRATE1 0xf583 +#define TSBITRATE1 REGx(R0900_P1_TSBITRATE1) +#define F0900_P1_TSFIFO_BITRATE1 0xf58300ff + +/*P1_TSBITRATE0*/ +#define R0900_P1_TSBITRATE0 0xf584 +#define TSBITRATE0 REGx(R0900_P1_TSBITRATE0) +#define F0900_P1_TSFIFO_BITRATE0 0xf58400ff + +/*P1_ERRCTRL1*/ +#define R0900_P1_ERRCTRL1 0xf598 +#define ERRCTRL1 REGx(R0900_P1_ERRCTRL1) +#define F0900_P1_ERR_SOURCE1 0xf59800f0 +#define F0900_P1_NUM_EVENT1 0xf5980007 + +/*P1_ERRCNT12*/ +#define R0900_P1_ERRCNT12 0xf599 +#define ERRCNT12 REGx(R0900_P1_ERRCNT12) +#define F0900_P1_ERRCNT1_OLDVALUE 0xf5990080 +#define F0900_P1_ERR_CNT12 0xf599007f +#define ERR_CNT12 FLDx(F0900_P1_ERR_CNT12) + +/*P1_ERRCNT11*/ +#define R0900_P1_ERRCNT11 0xf59a +#define ERRCNT11 REGx(R0900_P1_ERRCNT11) +#define F0900_P1_ERR_CNT11 0xf59a00ff +#define ERR_CNT11 FLDx(F0900_P1_ERR_CNT11) + +/*P1_ERRCNT10*/ +#define R0900_P1_ERRCNT10 0xf59b +#define ERRCNT10 REGx(R0900_P1_ERRCNT10) +#define F0900_P1_ERR_CNT10 0xf59b00ff +#define ERR_CNT10 FLDx(F0900_P1_ERR_CNT10) + +/*P1_ERRCTRL2*/ +#define R0900_P1_ERRCTRL2 0xf59c +#define ERRCTRL2 REGx(R0900_P1_ERRCTRL2) +#define F0900_P1_ERR_SOURCE2 0xf59c00f0 +#define F0900_P1_NUM_EVENT2 0xf59c0007 + +/*P1_ERRCNT22*/ +#define R0900_P1_ERRCNT22 0xf59d +#define ERRCNT22 REGx(R0900_P1_ERRCNT22) +#define F0900_P1_ERRCNT2_OLDVALUE 0xf59d0080 +#define F0900_P1_ERR_CNT22 0xf59d007f +#define ERR_CNT22 FLDx(F0900_P1_ERR_CNT22) + +/*P1_ERRCNT21*/ +#define R0900_P1_ERRCNT21 0xf59e +#define ERRCNT21 REGx(R0900_P1_ERRCNT21) +#define F0900_P1_ERR_CNT21 0xf59e00ff +#define ERR_CNT21 FLDx(F0900_P1_ERR_CNT21) + +/*P1_ERRCNT20*/ +#define R0900_P1_ERRCNT20 0xf59f +#define ERRCNT20 REGx(R0900_P1_ERRCNT20) +#define F0900_P1_ERR_CNT20 0xf59f00ff +#define ERR_CNT20 FLDx(F0900_P1_ERR_CNT20) + +/*P1_FECSPY*/ +#define R0900_P1_FECSPY 0xf5a0 +#define FECSPY REGx(R0900_P1_FECSPY) +#define F0900_P1_SPY_ENABLE 0xf5a00080 +#define F0900_P1_NO_SYNCBYTE 0xf5a00040 +#define F0900_P1_SERIAL_MODE 0xf5a00020 +#define F0900_P1_UNUSUAL_PACKET 0xf5a00010 +#define F0900_P1_BERMETER_DATAMODE 0xf5a00008 +#define F0900_P1_BERMETER_LMODE 0xf5a00002 +#define F0900_P1_BERMETER_RESET 0xf5a00001 + +/*P1_FSPYCFG*/ +#define R0900_P1_FSPYCFG 0xf5a1 +#define FSPYCFG REGx(R0900_P1_FSPYCFG) +#define F0900_P1_FECSPY_INPUT 0xf5a100c0 +#define F0900_P1_RST_ON_ERROR 0xf5a10020 +#define F0900_P1_ONE_SHOT 0xf5a10010 +#define F0900_P1_I2C_MODE 0xf5a1000c +#define F0900_P1_SPY_HYSTERESIS 0xf5a10003 + +/*P1_FSPYDATA*/ +#define R0900_P1_FSPYDATA 0xf5a2 +#define FSPYDATA REGx(R0900_P1_FSPYDATA) +#define F0900_P1_SPY_STUFFING 0xf5a20080 +#define F0900_P1_SPY_CNULLPKT 0xf5a20020 +#define F0900_P1_SPY_OUTDATA_MODE 0xf5a2001f + +/*P1_FSPYOUT*/ +#define R0900_P1_FSPYOUT 0xf5a3 +#define FSPYOUT REGx(R0900_P1_FSPYOUT) +#define F0900_P1_FSPY_DIRECT 0xf5a30080 +#define F0900_P1_STUFF_MODE 0xf5a30007 + +/*P1_FSTATUS*/ +#define R0900_P1_FSTATUS 0xf5a4 +#define FSTATUS REGx(R0900_P1_FSTATUS) +#define F0900_P1_SPY_ENDSIM 0xf5a40080 +#define F0900_P1_VALID_SIM 0xf5a40040 +#define F0900_P1_FOUND_SIGNAL 0xf5a40020 +#define F0900_P1_DSS_SYNCBYTE 0xf5a40010 +#define F0900_P1_RESULT_STATE 0xf5a4000f + +/*P1_FBERCPT4*/ +#define R0900_P1_FBERCPT4 0xf5a8 +#define FBERCPT4 REGx(R0900_P1_FBERCPT4) +#define F0900_P1_FBERMETER_CPT4 0xf5a800ff + +/*P1_FBERCPT3*/ +#define R0900_P1_FBERCPT3 0xf5a9 +#define FBERCPT3 REGx(R0900_P1_FBERCPT3) +#define F0900_P1_FBERMETER_CPT3 0xf5a900ff + +/*P1_FBERCPT2*/ +#define R0900_P1_FBERCPT2 0xf5aa +#define FBERCPT2 REGx(R0900_P1_FBERCPT2) +#define F0900_P1_FBERMETER_CPT2 0xf5aa00ff + +/*P1_FBERCPT1*/ +#define R0900_P1_FBERCPT1 0xf5ab +#define FBERCPT1 REGx(R0900_P1_FBERCPT1) +#define F0900_P1_FBERMETER_CPT1 0xf5ab00ff + +/*P1_FBERCPT0*/ +#define R0900_P1_FBERCPT0 0xf5ac +#define FBERCPT0 REGx(R0900_P1_FBERCPT0) +#define F0900_P1_FBERMETER_CPT0 0xf5ac00ff + +/*P1_FBERERR2*/ +#define R0900_P1_FBERERR2 0xf5ad +#define FBERERR2 REGx(R0900_P1_FBERERR2) +#define F0900_P1_FBERMETER_ERR2 0xf5ad00ff + +/*P1_FBERERR1*/ +#define R0900_P1_FBERERR1 0xf5ae +#define FBERERR1 REGx(R0900_P1_FBERERR1) +#define F0900_P1_FBERMETER_ERR1 0xf5ae00ff + +/*P1_FBERERR0*/ +#define R0900_P1_FBERERR0 0xf5af +#define FBERERR0 REGx(R0900_P1_FBERERR0) +#define F0900_P1_FBERMETER_ERR0 0xf5af00ff + +/*P1_FSPYBER*/ +#define R0900_P1_FSPYBER 0xf5b2 +#define FSPYBER REGx(R0900_P1_FSPYBER) +#define F0900_P1_FSPYBER_SYNCBYTE 0xf5b20010 +#define F0900_P1_FSPYBER_UNSYNC 0xf5b20008 +#define F0900_P1_FSPYBER_CTIME 0xf5b20007 + +/*RCCFG2*/ +#define R0900_RCCFG2 0xf600 + +/*TSGENERAL*/ +#define R0900_TSGENERAL 0xf630 +#define F0900_TSFIFO_DISTS2PAR 0xf6300040 +#define F0900_MUXSTREAM_OUTMODE 0xf6300008 +#define F0900_TSFIFO_PERMPARAL 0xf6300006 + +/*TSGENERAL1X*/ +#define R0900_TSGENERAL1X 0xf670 + +/*NBITER_NF4*/ +#define R0900_NBITER_NF4 0xfa03 +#define F0900_NBITER_NF_QP_1_2 0xfa0300ff + +/*NBITER_NF5*/ +#define R0900_NBITER_NF5 0xfa04 +#define F0900_NBITER_NF_QP_3_5 0xfa0400ff + +/*NBITER_NF6*/ +#define R0900_NBITER_NF6 0xfa05 +#define F0900_NBITER_NF_QP_2_3 0xfa0500ff + +/*NBITER_NF7*/ +#define R0900_NBITER_NF7 0xfa06 +#define F0900_NBITER_NF_QP_3_4 0xfa0600ff + +/*NBITER_NF8*/ +#define R0900_NBITER_NF8 0xfa07 +#define F0900_NBITER_NF_QP_4_5 0xfa0700ff + +/*NBITER_NF9*/ +#define R0900_NBITER_NF9 0xfa08 +#define F0900_NBITER_NF_QP_5_6 0xfa0800ff + +/*NBITER_NF10*/ +#define R0900_NBITER_NF10 0xfa09 +#define F0900_NBITER_NF_QP_8_9 0xfa0900ff + +/*NBITER_NF11*/ +#define R0900_NBITER_NF11 0xfa0a +#define F0900_NBITER_NF_QP_9_10 0xfa0a00ff + +/*NBITER_NF12*/ +#define R0900_NBITER_NF12 0xfa0b +#define F0900_NBITER_NF_8P_3_5 0xfa0b00ff + +/*NBITER_NF13*/ +#define R0900_NBITER_NF13 0xfa0c +#define F0900_NBITER_NF_8P_2_3 0xfa0c00ff + +/*NBITER_NF14*/ +#define R0900_NBITER_NF14 0xfa0d +#define F0900_NBITER_NF_8P_3_4 0xfa0d00ff + +/*NBITER_NF15*/ +#define R0900_NBITER_NF15 0xfa0e +#define F0900_NBITER_NF_8P_5_6 0xfa0e00ff + +/*NBITER_NF16*/ +#define R0900_NBITER_NF16 0xfa0f +#define F0900_NBITER_NF_8P_8_9 0xfa0f00ff + +/*NBITER_NF17*/ +#define R0900_NBITER_NF17 0xfa10 +#define F0900_NBITER_NF_8P_9_10 0xfa1000ff + +/*NBITERNOERR*/ +#define R0900_NBITERNOERR 0xfa3f +#define F0900_NBITER_STOP_CRIT 0xfa3f000f + +/*GAINLLR_NF4*/ +#define R0900_GAINLLR_NF4 0xfa43 +#define F0900_GAINLLR_NF_QP_1_2 0xfa43007f + +/*GAINLLR_NF5*/ +#define R0900_GAINLLR_NF5 0xfa44 +#define F0900_GAINLLR_NF_QP_3_5 0xfa44007f + +/*GAINLLR_NF6*/ +#define R0900_GAINLLR_NF6 0xfa45 +#define F0900_GAINLLR_NF_QP_2_3 0xfa45007f + +/*GAINLLR_NF7*/ +#define R0900_GAINLLR_NF7 0xfa46 +#define F0900_GAINLLR_NF_QP_3_4 0xfa46007f + +/*GAINLLR_NF8*/ +#define R0900_GAINLLR_NF8 0xfa47 +#define F0900_GAINLLR_NF_QP_4_5 0xfa47007f + +/*GAINLLR_NF9*/ +#define R0900_GAINLLR_NF9 0xfa48 +#define F0900_GAINLLR_NF_QP_5_6 0xfa48007f + +/*GAINLLR_NF10*/ +#define R0900_GAINLLR_NF10 0xfa49 +#define F0900_GAINLLR_NF_QP_8_9 0xfa49007f + +/*GAINLLR_NF11*/ +#define R0900_GAINLLR_NF11 0xfa4a +#define F0900_GAINLLR_NF_QP_9_10 0xfa4a007f + +/*GAINLLR_NF12*/ +#define R0900_GAINLLR_NF12 0xfa4b +#define F0900_GAINLLR_NF_8P_3_5 0xfa4b007f + +/*GAINLLR_NF13*/ +#define R0900_GAINLLR_NF13 0xfa4c +#define F0900_GAINLLR_NF_8P_2_3 0xfa4c007f + +/*GAINLLR_NF14*/ +#define R0900_GAINLLR_NF14 0xfa4d +#define F0900_GAINLLR_NF_8P_3_4 0xfa4d007f + +/*GAINLLR_NF15*/ +#define R0900_GAINLLR_NF15 0xfa4e +#define F0900_GAINLLR_NF_8P_5_6 0xfa4e007f + +/*GAINLLR_NF16*/ +#define R0900_GAINLLR_NF16 0xfa4f +#define F0900_GAINLLR_NF_8P_8_9 0xfa4f007f + +/*GAINLLR_NF17*/ +#define R0900_GAINLLR_NF17 0xfa50 +#define F0900_GAINLLR_NF_8P_9_10 0xfa50007f + +/*CFGEXT*/ +#define R0900_CFGEXT 0xfa80 +#define F0900_STAGMODE 0xfa800080 +#define F0900_BYPBCH 0xfa800040 +#define F0900_BYPLDPC 0xfa800020 +#define F0900_LDPCMODE 0xfa800010 +#define F0900_INVLLRSIGN 0xfa800008 +#define F0900_SHORTMULT 0xfa800004 +#define F0900_EXTERNTX 0xfa800001 + +/*GENCFG*/ +#define R0900_GENCFG 0xfa86 +#define F0900_BROADCAST 0xfa860010 +#define F0900_PRIORITY 0xfa860002 +#define F0900_DDEMOD 0xfa860001 + +/*LDPCERR1*/ +#define R0900_LDPCERR1 0xfa96 +#define F0900_LDPC_ERRORS_COUNTER1 0xfa9600ff + +/*LDPCERR0*/ +#define R0900_LDPCERR0 0xfa97 +#define F0900_LDPC_ERRORS_COUNTER0 0xfa9700ff + +/*BCHERR*/ +#define R0900_BCHERR 0xfa98 +#define F0900_ERRORFLAG 0xfa980010 +#define F0900_BCH_ERRORS_COUNTER 0xfa98000f + +/*TSTRES0*/ +#define R0900_TSTRES0 0xff11 +#define F0900_FRESFEC 0xff110080 + +/*P2_TCTL4*/ +#define R0900_P2_TCTL4 0xff28 +#define F0900_P2_PN4_SELECT 0xff280020 + +/*P1_TCTL4*/ +#define R0900_P1_TCTL4 0xff48 +#define TCTL4 shiftx(R0900_P1_TCTL4, demod, 0x20) +#define F0900_P1_PN4_SELECT 0xff480020 + +/*P2_TSTDISRX*/ +#define R0900_P2_TSTDISRX 0xff65 +#define F0900_P2_PIN_SELECT1 0xff650008 + +/*P1_TSTDISRX*/ +#define R0900_P1_TSTDISRX 0xff67 +#define TSTDISRX shiftx(R0900_P1_TSTDISRX, demod, 2) +#define F0900_P1_PIN_SELECT1 0xff670008 +#define PIN_SELECT1 shiftx(F0900_P1_PIN_SELECT1, demod, 0x20000) + +#define STV0900_NBREGS 723 +#define STV0900_NBFIELDS 1420 + +#endif + diff --git a/drivers/media/dvb-frontends/stv0900_sw.c b/drivers/media/dvb-frontends/stv0900_sw.c new file mode 100644 index 00000000..0a40edfa --- /dev/null +++ b/drivers/media/dvb-frontends/stv0900_sw.c @@ -0,0 +1,2029 @@ +/* + * stv0900_sw.c + * + * Driver for ST STV0900 satellite demodulator IC. + * + * Copyright (C) ST Microelectronics. + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "stv0900.h" +#include "stv0900_reg.h" +#include "stv0900_priv.h" + +s32 shiftx(s32 x, int demod, s32 shift) +{ + if (demod == 1) + return x - shift; + + return x; +} + +int stv0900_check_signal_presence(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + s32 carr_offset, + agc2_integr, + max_carrier; + + int no_signal = FALSE; + + carr_offset = (stv0900_read_reg(intp, CFR2) << 8) + | stv0900_read_reg(intp, CFR1); + carr_offset = ge2comp(carr_offset, 16); + agc2_integr = (stv0900_read_reg(intp, AGC2I1) << 8) + | stv0900_read_reg(intp, AGC2I0); + max_carrier = intp->srch_range[demod] / 1000; + + max_carrier += (max_carrier / 10); + max_carrier = 65536 * (max_carrier / 2); + max_carrier /= intp->mclk / 1000; + if (max_carrier > 0x4000) + max_carrier = 0x4000; + + if ((agc2_integr > 0x2000) + || (carr_offset > (2 * max_carrier)) + || (carr_offset < (-2 * max_carrier))) + no_signal = TRUE; + + return no_signal; +} + +static void stv0900_get_sw_loop_params(struct stv0900_internal *intp, + s32 *frequency_inc, s32 *sw_timeout, + s32 *steps, + enum fe_stv0900_demod_num demod) +{ + s32 timeout, freq_inc, max_steps, srate, max_carrier; + + enum fe_stv0900_search_standard standard; + + srate = intp->symbol_rate[demod]; + max_carrier = intp->srch_range[demod] / 1000; + max_carrier += max_carrier / 10; + standard = intp->srch_standard[demod]; + + max_carrier = 65536 * (max_carrier / 2); + max_carrier /= intp->mclk / 1000; + + if (max_carrier > 0x4000) + max_carrier = 0x4000; + + freq_inc = srate; + freq_inc /= intp->mclk >> 10; + freq_inc = freq_inc << 6; + + switch (standard) { + case STV0900_SEARCH_DVBS1: + case STV0900_SEARCH_DSS: + freq_inc *= 3; + timeout = 20; + break; + case STV0900_SEARCH_DVBS2: + freq_inc *= 4; + timeout = 25; + break; + case STV0900_AUTO_SEARCH: + default: + freq_inc *= 3; + timeout = 25; + break; + } + + freq_inc /= 100; + + if ((freq_inc > max_carrier) || (freq_inc < 0)) + freq_inc = max_carrier / 2; + + timeout *= 27500; + + if (srate > 0) + timeout /= srate / 1000; + + if ((timeout > 100) || (timeout < 0)) + timeout = 100; + + max_steps = (max_carrier / freq_inc) + 1; + + if ((max_steps > 100) || (max_steps < 0)) { + max_steps = 100; + freq_inc = max_carrier / max_steps; + } + + *frequency_inc = freq_inc; + *sw_timeout = timeout; + *steps = max_steps; + +} + +static int stv0900_search_carr_sw_loop(struct stv0900_internal *intp, + s32 FreqIncr, s32 Timeout, int zigzag, + s32 MaxStep, enum fe_stv0900_demod_num demod) +{ + int no_signal, + lock = FALSE; + s32 stepCpt, + freqOffset, + max_carrier; + + max_carrier = intp->srch_range[demod] / 1000; + max_carrier += (max_carrier / 10); + + max_carrier = 65536 * (max_carrier / 2); + max_carrier /= intp->mclk / 1000; + + if (max_carrier > 0x4000) + max_carrier = 0x4000; + + if (zigzag == TRUE) + freqOffset = 0; + else + freqOffset = -max_carrier + FreqIncr; + + stepCpt = 0; + + do { + stv0900_write_reg(intp, DMDISTATE, 0x1c); + stv0900_write_reg(intp, CFRINIT1, (freqOffset / 256) & 0xff); + stv0900_write_reg(intp, CFRINIT0, freqOffset & 0xff); + stv0900_write_reg(intp, DMDISTATE, 0x18); + stv0900_write_bits(intp, ALGOSWRST, 1); + + if (intp->chip_id == 0x12) { + stv0900_write_bits(intp, RST_HWARE, 1); + stv0900_write_bits(intp, RST_HWARE, 0); + } + + if (zigzag == TRUE) { + if (freqOffset >= 0) + freqOffset = -freqOffset - 2 * FreqIncr; + else + freqOffset = -freqOffset; + } else + freqOffset += + 2 * FreqIncr; + + stepCpt++; + lock = stv0900_get_demod_lock(intp, demod, Timeout); + no_signal = stv0900_check_signal_presence(intp, demod); + + } while ((lock == FALSE) + && (no_signal == FALSE) + && ((freqOffset - FreqIncr) < max_carrier) + && ((freqOffset + FreqIncr) > -max_carrier) + && (stepCpt < MaxStep)); + + stv0900_write_bits(intp, ALGOSWRST, 0); + + return lock; +} + +static int stv0900_sw_algo(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + int lock = FALSE, + no_signal, + zigzag; + s32 s2fw, + fqc_inc, + sft_stp_tout, + trial_cntr, + max_steps; + + stv0900_get_sw_loop_params(intp, &fqc_inc, &sft_stp_tout, + &max_steps, demod); + switch (intp->srch_standard[demod]) { + case STV0900_SEARCH_DVBS1: + case STV0900_SEARCH_DSS: + if (intp->chip_id >= 0x20) + stv0900_write_reg(intp, CARFREQ, 0x3b); + else + stv0900_write_reg(intp, CARFREQ, 0xef); + + stv0900_write_reg(intp, DMDCFGMD, 0x49); + zigzag = FALSE; + break; + case STV0900_SEARCH_DVBS2: + if (intp->chip_id >= 0x20) + stv0900_write_reg(intp, CORRELABS, 0x79); + else + stv0900_write_reg(intp, CORRELABS, 0x68); + + stv0900_write_reg(intp, DMDCFGMD, 0x89); + + zigzag = TRUE; + break; + case STV0900_AUTO_SEARCH: + default: + if (intp->chip_id >= 0x20) { + stv0900_write_reg(intp, CARFREQ, 0x3b); + stv0900_write_reg(intp, CORRELABS, 0x79); + } else { + stv0900_write_reg(intp, CARFREQ, 0xef); + stv0900_write_reg(intp, CORRELABS, 0x68); + } + + stv0900_write_reg(intp, DMDCFGMD, 0xc9); + zigzag = FALSE; + break; + } + + trial_cntr = 0; + do { + lock = stv0900_search_carr_sw_loop(intp, + fqc_inc, + sft_stp_tout, + zigzag, + max_steps, + demod); + no_signal = stv0900_check_signal_presence(intp, demod); + trial_cntr++; + if ((lock == TRUE) + || (no_signal == TRUE) + || (trial_cntr == 2)) { + + if (intp->chip_id >= 0x20) { + stv0900_write_reg(intp, CARFREQ, 0x49); + stv0900_write_reg(intp, CORRELABS, 0x9e); + } else { + stv0900_write_reg(intp, CARFREQ, 0xed); + stv0900_write_reg(intp, CORRELABS, 0x88); + } + + if ((stv0900_get_bits(intp, HEADER_MODE) == + STV0900_DVBS2_FOUND) && + (lock == TRUE)) { + msleep(sft_stp_tout); + s2fw = stv0900_get_bits(intp, FLYWHEEL_CPT); + + if (s2fw < 0xd) { + msleep(sft_stp_tout); + s2fw = stv0900_get_bits(intp, + FLYWHEEL_CPT); + } + + if (s2fw < 0xd) { + lock = FALSE; + + if (trial_cntr < 2) { + if (intp->chip_id >= 0x20) + stv0900_write_reg(intp, + CORRELABS, + 0x79); + else + stv0900_write_reg(intp, + CORRELABS, + 0x68); + + stv0900_write_reg(intp, + DMDCFGMD, + 0x89); + } + } + } + } + + } while ((lock == FALSE) + && (trial_cntr < 2) + && (no_signal == FALSE)); + + return lock; +} + +static u32 stv0900_get_symbol_rate(struct stv0900_internal *intp, + u32 mclk, + enum fe_stv0900_demod_num demod) +{ + s32 rem1, rem2, intval1, intval2, srate; + + srate = (stv0900_get_bits(intp, SYMB_FREQ3) << 24) + + (stv0900_get_bits(intp, SYMB_FREQ2) << 16) + + (stv0900_get_bits(intp, SYMB_FREQ1) << 8) + + (stv0900_get_bits(intp, SYMB_FREQ0)); + dprintk("lock: srate=%d r0=0x%x r1=0x%x r2=0x%x r3=0x%x \n", + srate, stv0900_get_bits(intp, SYMB_FREQ0), + stv0900_get_bits(intp, SYMB_FREQ1), + stv0900_get_bits(intp, SYMB_FREQ2), + stv0900_get_bits(intp, SYMB_FREQ3)); + + intval1 = (mclk) >> 16; + intval2 = (srate) >> 16; + + rem1 = (mclk) % 0x10000; + rem2 = (srate) % 0x10000; + srate = (intval1 * intval2) + + ((intval1 * rem2) >> 16) + + ((intval2 * rem1) >> 16); + + return srate; +} + +static void stv0900_set_symbol_rate(struct stv0900_internal *intp, + u32 mclk, u32 srate, + enum fe_stv0900_demod_num demod) +{ + u32 symb; + + dprintk("%s: Mclk %d, SR %d, Dmd %d\n", __func__, mclk, + srate, demod); + + if (srate > 60000000) { + symb = srate << 4; + symb /= (mclk >> 12); + } else if (srate > 6000000) { + symb = srate << 6; + symb /= (mclk >> 10); + } else { + symb = srate << 9; + symb /= (mclk >> 7); + } + + stv0900_write_reg(intp, SFRINIT1, (symb >> 8) & 0x7f); + stv0900_write_reg(intp, SFRINIT1 + 1, (symb & 0xff)); +} + +static void stv0900_set_max_symbol_rate(struct stv0900_internal *intp, + u32 mclk, u32 srate, + enum fe_stv0900_demod_num demod) +{ + u32 symb; + + srate = 105 * (srate / 100); + + if (srate > 60000000) { + symb = srate << 4; + symb /= (mclk >> 12); + } else if (srate > 6000000) { + symb = srate << 6; + symb /= (mclk >> 10); + } else { + symb = srate << 9; + symb /= (mclk >> 7); + } + + if (symb < 0x7fff) { + stv0900_write_reg(intp, SFRUP1, (symb >> 8) & 0x7f); + stv0900_write_reg(intp, SFRUP1 + 1, (symb & 0xff)); + } else { + stv0900_write_reg(intp, SFRUP1, 0x7f); + stv0900_write_reg(intp, SFRUP1 + 1, 0xff); + } +} + +static void stv0900_set_min_symbol_rate(struct stv0900_internal *intp, + u32 mclk, u32 srate, + enum fe_stv0900_demod_num demod) +{ + u32 symb; + + srate = 95 * (srate / 100); + if (srate > 60000000) { + symb = srate << 4; + symb /= (mclk >> 12); + + } else if (srate > 6000000) { + symb = srate << 6; + symb /= (mclk >> 10); + + } else { + symb = srate << 9; + symb /= (mclk >> 7); + } + + stv0900_write_reg(intp, SFRLOW1, (symb >> 8) & 0xff); + stv0900_write_reg(intp, SFRLOW1 + 1, (symb & 0xff)); +} + +static s32 stv0900_get_timing_offst(struct stv0900_internal *intp, + u32 srate, + enum fe_stv0900_demod_num demod) +{ + s32 timingoffset; + + + timingoffset = (stv0900_read_reg(intp, TMGREG2) << 16) + + (stv0900_read_reg(intp, TMGREG2 + 1) << 8) + + (stv0900_read_reg(intp, TMGREG2 + 2)); + + timingoffset = ge2comp(timingoffset, 24); + + + if (timingoffset == 0) + timingoffset = 1; + + timingoffset = ((s32)srate * 10) / ((s32)0x1000000 / timingoffset); + timingoffset /= 320; + + return timingoffset; +} + +static void stv0900_set_dvbs2_rolloff(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + s32 rolloff; + + if (intp->chip_id == 0x10) { + stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1); + rolloff = stv0900_read_reg(intp, MATSTR1) & 0x03; + stv0900_write_bits(intp, ROLLOFF_CONTROL, rolloff); + } else if (intp->chip_id <= 0x20) + stv0900_write_bits(intp, MANUALSX_ROLLOFF, 0); + else /* cut 3.0 */ + stv0900_write_bits(intp, MANUALS2_ROLLOFF, 0); +} + +static u32 stv0900_carrier_width(u32 srate, enum fe_stv0900_rolloff ro) +{ + u32 rolloff; + + switch (ro) { + case STV0900_20: + rolloff = 20; + break; + case STV0900_25: + rolloff = 25; + break; + case STV0900_35: + default: + rolloff = 35; + break; + } + + return srate + (srate * rolloff) / 100; +} + +static int stv0900_check_timing_lock(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + int timingLock = FALSE; + s32 i, + timingcpt = 0; + u8 car_freq, + tmg_th_high, + tmg_th_low; + + car_freq = stv0900_read_reg(intp, CARFREQ); + tmg_th_high = stv0900_read_reg(intp, TMGTHRISE); + tmg_th_low = stv0900_read_reg(intp, TMGTHFALL); + stv0900_write_reg(intp, TMGTHRISE, 0x20); + stv0900_write_reg(intp, TMGTHFALL, 0x0); + stv0900_write_bits(intp, CFR_AUTOSCAN, 0); + stv0900_write_reg(intp, RTC, 0x80); + stv0900_write_reg(intp, RTCS2, 0x40); + stv0900_write_reg(intp, CARFREQ, 0x0); + stv0900_write_reg(intp, CFRINIT1, 0x0); + stv0900_write_reg(intp, CFRINIT0, 0x0); + stv0900_write_reg(intp, AGC2REF, 0x65); + stv0900_write_reg(intp, DMDISTATE, 0x18); + msleep(7); + + for (i = 0; i < 10; i++) { + if (stv0900_get_bits(intp, TMGLOCK_QUALITY) >= 2) + timingcpt++; + + msleep(1); + } + + if (timingcpt >= 3) + timingLock = TRUE; + + stv0900_write_reg(intp, AGC2REF, 0x38); + stv0900_write_reg(intp, RTC, 0x88); + stv0900_write_reg(intp, RTCS2, 0x68); + stv0900_write_reg(intp, CARFREQ, car_freq); + stv0900_write_reg(intp, TMGTHRISE, tmg_th_high); + stv0900_write_reg(intp, TMGTHFALL, tmg_th_low); + + return timingLock; +} + +static int stv0900_get_demod_cold_lock(struct dvb_frontend *fe, + s32 demod_timeout) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + int lock = FALSE, + d = demod; + s32 srate, + search_range, + locktimeout, + currier_step, + nb_steps, + current_step, + direction, + tuner_freq, + timeout, + freq; + + srate = intp->symbol_rate[d]; + search_range = intp->srch_range[d]; + + if (srate >= 10000000) + locktimeout = demod_timeout / 3; + else + locktimeout = demod_timeout / 2; + + lock = stv0900_get_demod_lock(intp, d, locktimeout); + + if (lock != FALSE) + return lock; + + if (srate >= 10000000) { + if (stv0900_check_timing_lock(intp, d) == TRUE) { + stv0900_write_reg(intp, DMDISTATE, 0x1f); + stv0900_write_reg(intp, DMDISTATE, 0x15); + lock = stv0900_get_demod_lock(intp, d, demod_timeout); + } else + lock = FALSE; + + return lock; + } + + if (intp->chip_id <= 0x20) { + if (srate <= 1000000) + currier_step = 500; + else if (srate <= 4000000) + currier_step = 1000; + else if (srate <= 7000000) + currier_step = 2000; + else if (srate <= 10000000) + currier_step = 3000; + else + currier_step = 5000; + + if (srate >= 2000000) { + timeout = (demod_timeout / 3); + if (timeout > 1000) + timeout = 1000; + } else + timeout = (demod_timeout / 2); + } else { + /*cut 3.0 */ + currier_step = srate / 4000; + timeout = (demod_timeout * 3) / 4; + } + + nb_steps = ((search_range / 1000) / currier_step); + + if ((nb_steps % 2) != 0) + nb_steps += 1; + + if (nb_steps <= 0) + nb_steps = 2; + else if (nb_steps > 12) + nb_steps = 12; + + current_step = 1; + direction = 1; + + if (intp->chip_id <= 0x20) { + tuner_freq = intp->freq[d]; + intp->bw[d] = stv0900_carrier_width(intp->symbol_rate[d], + intp->rolloff) + intp->symbol_rate[d]; + } else + tuner_freq = 0; + + while ((current_step <= nb_steps) && (lock == FALSE)) { + if (direction > 0) + tuner_freq += (current_step * currier_step); + else + tuner_freq -= (current_step * currier_step); + + if (intp->chip_id <= 0x20) { + if (intp->tuner_type[d] == 3) + stv0900_set_tuner_auto(intp, tuner_freq, + intp->bw[d], demod); + else + stv0900_set_tuner(fe, tuner_freq, intp->bw[d]); + + stv0900_write_reg(intp, DMDISTATE, 0x1c); + stv0900_write_reg(intp, CFRINIT1, 0); + stv0900_write_reg(intp, CFRINIT0, 0); + stv0900_write_reg(intp, DMDISTATE, 0x1f); + stv0900_write_reg(intp, DMDISTATE, 0x15); + } else { + stv0900_write_reg(intp, DMDISTATE, 0x1c); + freq = (tuner_freq * 65536) / (intp->mclk / 1000); + stv0900_write_bits(intp, CFR_INIT1, MSB(freq)); + stv0900_write_bits(intp, CFR_INIT0, LSB(freq)); + stv0900_write_reg(intp, DMDISTATE, 0x1f); + stv0900_write_reg(intp, DMDISTATE, 0x05); + } + + lock = stv0900_get_demod_lock(intp, d, timeout); + direction *= -1; + current_step++; + } + + return lock; +} + +static void stv0900_get_lock_timeout(s32 *demod_timeout, s32 *fec_timeout, + s32 srate, + enum fe_stv0900_search_algo algo) +{ + switch (algo) { + case STV0900_BLIND_SEARCH: + if (srate <= 1500000) { + (*demod_timeout) = 1500; + (*fec_timeout) = 400; + } else if (srate <= 5000000) { + (*demod_timeout) = 1000; + (*fec_timeout) = 300; + } else { + (*demod_timeout) = 700; + (*fec_timeout) = 100; + } + + break; + case STV0900_COLD_START: + case STV0900_WARM_START: + default: + if (srate <= 1000000) { + (*demod_timeout) = 3000; + (*fec_timeout) = 1700; + } else if (srate <= 2000000) { + (*demod_timeout) = 2500; + (*fec_timeout) = 1100; + } else if (srate <= 5000000) { + (*demod_timeout) = 1000; + (*fec_timeout) = 550; + } else if (srate <= 10000000) { + (*demod_timeout) = 700; + (*fec_timeout) = 250; + } else if (srate <= 20000000) { + (*demod_timeout) = 400; + (*fec_timeout) = 130; + } else { + (*demod_timeout) = 300; + (*fec_timeout) = 100; + } + + break; + + } + + if (algo == STV0900_WARM_START) + (*demod_timeout) /= 2; +} + +static void stv0900_set_viterbi_tracq(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + + s32 vth_reg = VTH12; + + dprintk("%s\n", __func__); + + stv0900_write_reg(intp, vth_reg++, 0xd0); + stv0900_write_reg(intp, vth_reg++, 0x7d); + stv0900_write_reg(intp, vth_reg++, 0x53); + stv0900_write_reg(intp, vth_reg++, 0x2f); + stv0900_write_reg(intp, vth_reg++, 0x24); + stv0900_write_reg(intp, vth_reg++, 0x1f); +} + +static void stv0900_set_viterbi_standard(struct stv0900_internal *intp, + enum fe_stv0900_search_standard standard, + enum fe_stv0900_fec fec, + enum fe_stv0900_demod_num demod) +{ + dprintk("%s: ViterbiStandard = ", __func__); + + switch (standard) { + case STV0900_AUTO_SEARCH: + dprintk("Auto\n"); + stv0900_write_reg(intp, FECM, 0x10); + stv0900_write_reg(intp, PRVIT, 0x3f); + break; + case STV0900_SEARCH_DVBS1: + dprintk("DVBS1\n"); + stv0900_write_reg(intp, FECM, 0x00); + switch (fec) { + case STV0900_FEC_UNKNOWN: + default: + stv0900_write_reg(intp, PRVIT, 0x2f); + break; + case STV0900_FEC_1_2: + stv0900_write_reg(intp, PRVIT, 0x01); + break; + case STV0900_FEC_2_3: + stv0900_write_reg(intp, PRVIT, 0x02); + break; + case STV0900_FEC_3_4: + stv0900_write_reg(intp, PRVIT, 0x04); + break; + case STV0900_FEC_5_6: + stv0900_write_reg(intp, PRVIT, 0x08); + break; + case STV0900_FEC_7_8: + stv0900_write_reg(intp, PRVIT, 0x20); + break; + } + + break; + case STV0900_SEARCH_DSS: + dprintk("DSS\n"); + stv0900_write_reg(intp, FECM, 0x80); + switch (fec) { + case STV0900_FEC_UNKNOWN: + default: + stv0900_write_reg(intp, PRVIT, 0x13); + break; + case STV0900_FEC_1_2: + stv0900_write_reg(intp, PRVIT, 0x01); + break; + case STV0900_FEC_2_3: + stv0900_write_reg(intp, PRVIT, 0x02); + break; + case STV0900_FEC_6_7: + stv0900_write_reg(intp, PRVIT, 0x10); + break; + } + break; + default: + break; + } +} + +static enum fe_stv0900_fec stv0900_get_vit_fec(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + enum fe_stv0900_fec prate; + s32 rate_fld = stv0900_get_bits(intp, VIT_CURPUN); + + switch (rate_fld) { + case 13: + prate = STV0900_FEC_1_2; + break; + case 18: + prate = STV0900_FEC_2_3; + break; + case 21: + prate = STV0900_FEC_3_4; + break; + case 24: + prate = STV0900_FEC_5_6; + break; + case 25: + prate = STV0900_FEC_6_7; + break; + case 26: + prate = STV0900_FEC_7_8; + break; + default: + prate = STV0900_FEC_UNKNOWN; + break; + } + + return prate; +} + +static void stv0900_set_dvbs1_track_car_loop(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod, + u32 srate) +{ + if (intp->chip_id >= 0x30) { + if (srate >= 15000000) { + stv0900_write_reg(intp, ACLC, 0x2b); + stv0900_write_reg(intp, BCLC, 0x1a); + } else if ((srate >= 7000000) && (15000000 > srate)) { + stv0900_write_reg(intp, ACLC, 0x0c); + stv0900_write_reg(intp, BCLC, 0x1b); + } else if (srate < 7000000) { + stv0900_write_reg(intp, ACLC, 0x2c); + stv0900_write_reg(intp, BCLC, 0x1c); + } + + } else { /*cut 2.0 and 1.x*/ + stv0900_write_reg(intp, ACLC, 0x1a); + stv0900_write_reg(intp, BCLC, 0x09); + } + +} + +static void stv0900_track_optimization(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + + s32 srate, + pilots, + aclc, + freq1, + freq0, + i = 0, + timed, + timef, + blind_tun_sw = 0, + modulation; + + enum fe_stv0900_modcode foundModcod; + + dprintk("%s\n", __func__); + + srate = stv0900_get_symbol_rate(intp, intp->mclk, demod); + srate += stv0900_get_timing_offst(intp, srate, demod); + + switch (intp->result[demod].standard) { + case STV0900_DVBS1_STANDARD: + case STV0900_DSS_STANDARD: + dprintk("%s: found DVB-S or DSS\n", __func__); + if (intp->srch_standard[demod] == STV0900_AUTO_SEARCH) { + stv0900_write_bits(intp, DVBS1_ENABLE, 1); + stv0900_write_bits(intp, DVBS2_ENABLE, 0); + } + + stv0900_write_bits(intp, ROLLOFF_CONTROL, intp->rolloff); + stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1); + + if (intp->chip_id < 0x30) { + stv0900_write_reg(intp, ERRCTRL1, 0x75); + break; + } + + if (stv0900_get_vit_fec(intp, demod) == STV0900_FEC_1_2) { + stv0900_write_reg(intp, GAUSSR0, 0x98); + stv0900_write_reg(intp, CCIR0, 0x18); + } else { + stv0900_write_reg(intp, GAUSSR0, 0x18); + stv0900_write_reg(intp, CCIR0, 0x18); + } + + stv0900_write_reg(intp, ERRCTRL1, 0x75); + break; + case STV0900_DVBS2_STANDARD: + dprintk("%s: found DVB-S2\n", __func__); + stv0900_write_bits(intp, DVBS1_ENABLE, 0); + stv0900_write_bits(intp, DVBS2_ENABLE, 1); + stv0900_write_reg(intp, ACLC, 0); + stv0900_write_reg(intp, BCLC, 0); + if (intp->result[demod].frame_len == STV0900_LONG_FRAME) { + foundModcod = stv0900_get_bits(intp, DEMOD_MODCOD); + pilots = stv0900_get_bits(intp, DEMOD_TYPE) & 0x01; + aclc = stv0900_get_optim_carr_loop(srate, + foundModcod, + pilots, + intp->chip_id); + if (foundModcod <= STV0900_QPSK_910) + stv0900_write_reg(intp, ACLC2S2Q, aclc); + else if (foundModcod <= STV0900_8PSK_910) { + stv0900_write_reg(intp, ACLC2S2Q, 0x2a); + stv0900_write_reg(intp, ACLC2S28, aclc); + } + + if ((intp->demod_mode == STV0900_SINGLE) && + (foundModcod > STV0900_8PSK_910)) { + if (foundModcod <= STV0900_16APSK_910) { + stv0900_write_reg(intp, ACLC2S2Q, 0x2a); + stv0900_write_reg(intp, ACLC2S216A, + aclc); + } else if (foundModcod <= STV0900_32APSK_910) { + stv0900_write_reg(intp, ACLC2S2Q, 0x2a); + stv0900_write_reg(intp, ACLC2S232A, + aclc); + } + } + + } else { + modulation = intp->result[demod].modulation; + aclc = stv0900_get_optim_short_carr_loop(srate, + modulation, intp->chip_id); + if (modulation == STV0900_QPSK) + stv0900_write_reg(intp, ACLC2S2Q, aclc); + else if (modulation == STV0900_8PSK) { + stv0900_write_reg(intp, ACLC2S2Q, 0x2a); + stv0900_write_reg(intp, ACLC2S28, aclc); + } else if (modulation == STV0900_16APSK) { + stv0900_write_reg(intp, ACLC2S2Q, 0x2a); + stv0900_write_reg(intp, ACLC2S216A, aclc); + } else if (modulation == STV0900_32APSK) { + stv0900_write_reg(intp, ACLC2S2Q, 0x2a); + stv0900_write_reg(intp, ACLC2S232A, aclc); + } + + } + + if (intp->chip_id <= 0x11) { + if (intp->demod_mode != STV0900_SINGLE) + stv0900_activate_s2_modcod(intp, demod); + + } + + stv0900_write_reg(intp, ERRCTRL1, 0x67); + break; + case STV0900_UNKNOWN_STANDARD: + default: + dprintk("%s: found unknown standard\n", __func__); + stv0900_write_bits(intp, DVBS1_ENABLE, 1); + stv0900_write_bits(intp, DVBS2_ENABLE, 1); + break; + } + + freq1 = stv0900_read_reg(intp, CFR2); + freq0 = stv0900_read_reg(intp, CFR1); + if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH) { + stv0900_write_reg(intp, SFRSTEP, 0x00); + stv0900_write_bits(intp, SCAN_ENABLE, 0); + stv0900_write_bits(intp, CFR_AUTOSCAN, 0); + stv0900_write_reg(intp, TMGCFG2, 0xc1); + stv0900_set_symbol_rate(intp, intp->mclk, srate, demod); + blind_tun_sw = 1; + if (intp->result[demod].standard != STV0900_DVBS2_STANDARD) + stv0900_set_dvbs1_track_car_loop(intp, demod, srate); + + } + + if (intp->chip_id >= 0x20) { + if ((intp->srch_standard[demod] == STV0900_SEARCH_DVBS1) || + (intp->srch_standard[demod] == + STV0900_SEARCH_DSS) || + (intp->srch_standard[demod] == + STV0900_AUTO_SEARCH)) { + stv0900_write_reg(intp, VAVSRVIT, 0x0a); + stv0900_write_reg(intp, VITSCALE, 0x0); + } + } + + if (intp->chip_id < 0x20) + stv0900_write_reg(intp, CARHDR, 0x08); + + if (intp->chip_id == 0x10) + stv0900_write_reg(intp, CORRELEXP, 0x0a); + + stv0900_write_reg(intp, AGC2REF, 0x38); + + if ((intp->chip_id >= 0x20) || + (blind_tun_sw == 1) || + (intp->symbol_rate[demod] < 10000000)) { + stv0900_write_reg(intp, CFRINIT1, freq1); + stv0900_write_reg(intp, CFRINIT0, freq0); + intp->bw[demod] = stv0900_carrier_width(srate, + intp->rolloff) + 10000000; + + if ((intp->chip_id >= 0x20) || (blind_tun_sw == 1)) { + if (intp->srch_algo[demod] != STV0900_WARM_START) { + if (intp->tuner_type[demod] == 3) + stv0900_set_tuner_auto(intp, + intp->freq[demod], + intp->bw[demod], + demod); + else + stv0900_set_bandwidth(fe, + intp->bw[demod]); + } + } + + if ((intp->srch_algo[demod] == STV0900_BLIND_SEARCH) || + (intp->symbol_rate[demod] < 10000000)) + msleep(50); + else + msleep(5); + + stv0900_get_lock_timeout(&timed, &timef, srate, + STV0900_WARM_START); + + if (stv0900_get_demod_lock(intp, demod, timed / 2) == FALSE) { + stv0900_write_reg(intp, DMDISTATE, 0x1f); + stv0900_write_reg(intp, CFRINIT1, freq1); + stv0900_write_reg(intp, CFRINIT0, freq0); + stv0900_write_reg(intp, DMDISTATE, 0x18); + i = 0; + while ((stv0900_get_demod_lock(intp, + demod, + timed / 2) == FALSE) && + (i <= 2)) { + stv0900_write_reg(intp, DMDISTATE, 0x1f); + stv0900_write_reg(intp, CFRINIT1, freq1); + stv0900_write_reg(intp, CFRINIT0, freq0); + stv0900_write_reg(intp, DMDISTATE, 0x18); + i++; + } + } + + } + + if (intp->chip_id >= 0x20) + stv0900_write_reg(intp, CARFREQ, 0x49); + + if ((intp->result[demod].standard == STV0900_DVBS1_STANDARD) || + (intp->result[demod].standard == STV0900_DSS_STANDARD)) + stv0900_set_viterbi_tracq(intp, demod); + +} + +static int stv0900_get_fec_lock(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod, s32 time_out) +{ + s32 timer = 0, lock = 0; + + enum fe_stv0900_search_state dmd_state; + + dprintk("%s\n", __func__); + + dmd_state = stv0900_get_bits(intp, HEADER_MODE); + + while ((timer < time_out) && (lock == 0)) { + switch (dmd_state) { + case STV0900_SEARCH: + case STV0900_PLH_DETECTED: + default: + lock = 0; + break; + case STV0900_DVBS2_FOUND: + lock = stv0900_get_bits(intp, PKTDELIN_LOCK); + break; + case STV0900_DVBS_FOUND: + lock = stv0900_get_bits(intp, LOCKEDVIT); + break; + } + + if (lock == 0) { + msleep(10); + timer += 10; + } + } + + if (lock) + dprintk("%s: DEMOD FEC LOCK OK\n", __func__); + else + dprintk("%s: DEMOD FEC LOCK FAIL\n", __func__); + + return lock; +} + +static int stv0900_wait_for_lock(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod, + s32 dmd_timeout, s32 fec_timeout) +{ + + s32 timer = 0, lock = 0; + + dprintk("%s\n", __func__); + + lock = stv0900_get_demod_lock(intp, demod, dmd_timeout); + + if (lock) + lock = lock && stv0900_get_fec_lock(intp, demod, fec_timeout); + + if (lock) { + lock = 0; + + dprintk("%s: Timer = %d, time_out = %d\n", + __func__, timer, fec_timeout); + + while ((timer < fec_timeout) && (lock == 0)) { + lock = stv0900_get_bits(intp, TSFIFO_LINEOK); + msleep(1); + timer++; + } + } + + if (lock) + dprintk("%s: DEMOD LOCK OK\n", __func__); + else + dprintk("%s: DEMOD LOCK FAIL\n", __func__); + + if (lock) + return TRUE; + else + return FALSE; +} + +enum fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe, + enum fe_stv0900_demod_num demod) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_tracking_standard fnd_standard; + + int hdr_mode = stv0900_get_bits(intp, HEADER_MODE); + + switch (hdr_mode) { + case 2: + fnd_standard = STV0900_DVBS2_STANDARD; + break; + case 3: + if (stv0900_get_bits(intp, DSS_DVB) == 1) + fnd_standard = STV0900_DSS_STANDARD; + else + fnd_standard = STV0900_DVBS1_STANDARD; + + break; + default: + fnd_standard = STV0900_UNKNOWN_STANDARD; + } + + dprintk("%s: standard %d\n", __func__, fnd_standard); + + return fnd_standard; +} + +static s32 stv0900_get_carr_freq(struct stv0900_internal *intp, u32 mclk, + enum fe_stv0900_demod_num demod) +{ + s32 derot, + rem1, + rem2, + intval1, + intval2; + + derot = (stv0900_get_bits(intp, CAR_FREQ2) << 16) + + (stv0900_get_bits(intp, CAR_FREQ1) << 8) + + (stv0900_get_bits(intp, CAR_FREQ0)); + + derot = ge2comp(derot, 24); + intval1 = mclk >> 12; + intval2 = derot >> 12; + rem1 = mclk % 0x1000; + rem2 = derot % 0x1000; + derot = (intval1 * intval2) + + ((intval1 * rem2) >> 12) + + ((intval2 * rem1) >> 12); + + return derot; +} + +static u32 stv0900_get_tuner_freq(struct dvb_frontend *fe) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + u32 freq = 0; + + frontend_ops = &fe->ops; + tuner_ops = &frontend_ops->tuner_ops; + + if (tuner_ops->get_frequency) { + if ((tuner_ops->get_frequency(fe, &freq)) < 0) + dprintk("%s: Invalid parameter\n", __func__); + else + dprintk("%s: Frequency=%d\n", __func__, freq); + + } + + return freq; +} + +static enum +fe_stv0900_signal_type stv0900_get_signal_params(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + enum fe_stv0900_signal_type range = STV0900_OUTOFRANGE; + struct stv0900_signal_info *result = &intp->result[demod]; + s32 offsetFreq, + srate_offset; + int i = 0, + d = demod; + + u8 timing; + + msleep(5); + if (intp->srch_algo[d] == STV0900_BLIND_SEARCH) { + timing = stv0900_read_reg(intp, TMGREG2); + i = 0; + stv0900_write_reg(intp, SFRSTEP, 0x5c); + + while ((i <= 50) && (timing != 0) && (timing != 0xff)) { + timing = stv0900_read_reg(intp, TMGREG2); + msleep(5); + i += 5; + } + } + + result->standard = stv0900_get_standard(fe, d); + if (intp->tuner_type[demod] == 3) + result->frequency = stv0900_get_freq_auto(intp, d); + else + result->frequency = stv0900_get_tuner_freq(fe); + + offsetFreq = stv0900_get_carr_freq(intp, intp->mclk, d) / 1000; + result->frequency += offsetFreq; + result->symbol_rate = stv0900_get_symbol_rate(intp, intp->mclk, d); + srate_offset = stv0900_get_timing_offst(intp, result->symbol_rate, d); + result->symbol_rate += srate_offset; + result->fec = stv0900_get_vit_fec(intp, d); + result->modcode = stv0900_get_bits(intp, DEMOD_MODCOD); + result->pilot = stv0900_get_bits(intp, DEMOD_TYPE) & 0x01; + result->frame_len = ((u32)stv0900_get_bits(intp, DEMOD_TYPE)) >> 1; + result->rolloff = stv0900_get_bits(intp, ROLLOFF_STATUS); + + dprintk("%s: modcode=0x%x \n", __func__, result->modcode); + + switch (result->standard) { + case STV0900_DVBS2_STANDARD: + result->spectrum = stv0900_get_bits(intp, SPECINV_DEMOD); + if (result->modcode <= STV0900_QPSK_910) + result->modulation = STV0900_QPSK; + else if (result->modcode <= STV0900_8PSK_910) + result->modulation = STV0900_8PSK; + else if (result->modcode <= STV0900_16APSK_910) + result->modulation = STV0900_16APSK; + else if (result->modcode <= STV0900_32APSK_910) + result->modulation = STV0900_32APSK; + else + result->modulation = STV0900_UNKNOWN; + break; + case STV0900_DVBS1_STANDARD: + case STV0900_DSS_STANDARD: + result->spectrum = stv0900_get_bits(intp, IQINV); + result->modulation = STV0900_QPSK; + break; + default: + break; + } + + if ((intp->srch_algo[d] == STV0900_BLIND_SEARCH) || + (intp->symbol_rate[d] < 10000000)) { + offsetFreq = result->frequency - intp->freq[d]; + if (intp->tuner_type[demod] == 3) + intp->freq[d] = stv0900_get_freq_auto(intp, d); + else + intp->freq[d] = stv0900_get_tuner_freq(fe); + + if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500)) + range = STV0900_RANGEOK; + else if (ABS(offsetFreq) <= + (stv0900_carrier_width(result->symbol_rate, + result->rolloff) / 2000)) + range = STV0900_RANGEOK; + + } else if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500)) + range = STV0900_RANGEOK; + + dprintk("%s: range %d\n", __func__, range); + + return range; +} + +static enum +fe_stv0900_signal_type stv0900_dvbs1_acq_workaround(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + enum fe_stv0900_signal_type signal_type = STV0900_NODATA; + + s32 srate, + demod_timeout, + fec_timeout, + freq1, + freq0; + + intp->result[demod].locked = FALSE; + + if (stv0900_get_bits(intp, HEADER_MODE) == STV0900_DVBS_FOUND) { + srate = stv0900_get_symbol_rate(intp, intp->mclk, demod); + srate += stv0900_get_timing_offst(intp, srate, demod); + if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH) + stv0900_set_symbol_rate(intp, intp->mclk, srate, demod); + + stv0900_get_lock_timeout(&demod_timeout, &fec_timeout, + srate, STV0900_WARM_START); + freq1 = stv0900_read_reg(intp, CFR2); + freq0 = stv0900_read_reg(intp, CFR1); + stv0900_write_bits(intp, CFR_AUTOSCAN, 0); + stv0900_write_bits(intp, SPECINV_CONTROL, + STV0900_IQ_FORCE_SWAPPED); + stv0900_write_reg(intp, DMDISTATE, 0x1c); + stv0900_write_reg(intp, CFRINIT1, freq1); + stv0900_write_reg(intp, CFRINIT0, freq0); + stv0900_write_reg(intp, DMDISTATE, 0x18); + if (stv0900_wait_for_lock(intp, demod, + demod_timeout, fec_timeout) == TRUE) { + intp->result[demod].locked = TRUE; + signal_type = stv0900_get_signal_params(fe); + stv0900_track_optimization(fe); + } else { + stv0900_write_bits(intp, SPECINV_CONTROL, + STV0900_IQ_FORCE_NORMAL); + stv0900_write_reg(intp, DMDISTATE, 0x1c); + stv0900_write_reg(intp, CFRINIT1, freq1); + stv0900_write_reg(intp, CFRINIT0, freq0); + stv0900_write_reg(intp, DMDISTATE, 0x18); + if (stv0900_wait_for_lock(intp, demod, + demod_timeout, fec_timeout) == TRUE) { + intp->result[demod].locked = TRUE; + signal_type = stv0900_get_signal_params(fe); + stv0900_track_optimization(fe); + } + + } + + } else + intp->result[demod].locked = FALSE; + + return signal_type; +} + +static u16 stv0900_blind_check_agc2_min_level(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + u32 minagc2level = 0xffff, + agc2level, + init_freq, freq_step; + + s32 i, j, nb_steps, direction; + + dprintk("%s\n", __func__); + + stv0900_write_reg(intp, AGC2REF, 0x38); + stv0900_write_bits(intp, SCAN_ENABLE, 0); + stv0900_write_bits(intp, CFR_AUTOSCAN, 0); + + stv0900_write_bits(intp, AUTO_GUP, 1); + stv0900_write_bits(intp, AUTO_GLOW, 1); + + stv0900_write_reg(intp, DMDT0M, 0x0); + + stv0900_set_symbol_rate(intp, intp->mclk, 1000000, demod); + nb_steps = -1 + (intp->srch_range[demod] / 1000000); + nb_steps /= 2; + nb_steps = (2 * nb_steps) + 1; + + if (nb_steps < 0) + nb_steps = 1; + + direction = 1; + + freq_step = (1000000 << 8) / (intp->mclk >> 8); + + init_freq = 0; + + for (i = 0; i < nb_steps; i++) { + if (direction > 0) + init_freq = init_freq + (freq_step * i); + else + init_freq = init_freq - (freq_step * i); + + direction *= -1; + stv0900_write_reg(intp, DMDISTATE, 0x5C); + stv0900_write_reg(intp, CFRINIT1, (init_freq >> 8) & 0xff); + stv0900_write_reg(intp, CFRINIT0, init_freq & 0xff); + stv0900_write_reg(intp, DMDISTATE, 0x58); + msleep(10); + agc2level = 0; + + for (j = 0; j < 10; j++) + agc2level += (stv0900_read_reg(intp, AGC2I1) << 8) + | stv0900_read_reg(intp, AGC2I0); + + agc2level /= 10; + + if (agc2level < minagc2level) + minagc2level = agc2level; + + } + + return (u16)minagc2level; +} + +static u32 stv0900_search_srate_coarse(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + int timing_lck = FALSE; + s32 i, timingcpt = 0, + direction = 1, + nb_steps, + current_step = 0, + tuner_freq; + u32 agc2_th, + coarse_srate = 0, + agc2_integr = 0, + currier_step = 1200; + + if (intp->chip_id >= 0x30) + agc2_th = 0x2e00; + else + agc2_th = 0x1f00; + + stv0900_write_bits(intp, DEMOD_MODE, 0x1f); + stv0900_write_reg(intp, TMGCFG, 0x12); + stv0900_write_reg(intp, TMGTHRISE, 0xf0); + stv0900_write_reg(intp, TMGTHFALL, 0xe0); + stv0900_write_bits(intp, SCAN_ENABLE, 1); + stv0900_write_bits(intp, CFR_AUTOSCAN, 1); + stv0900_write_reg(intp, SFRUP1, 0x83); + stv0900_write_reg(intp, SFRUP0, 0xc0); + stv0900_write_reg(intp, SFRLOW1, 0x82); + stv0900_write_reg(intp, SFRLOW0, 0xa0); + stv0900_write_reg(intp, DMDT0M, 0x0); + stv0900_write_reg(intp, AGC2REF, 0x50); + + if (intp->chip_id >= 0x30) { + stv0900_write_reg(intp, CARFREQ, 0x99); + stv0900_write_reg(intp, SFRSTEP, 0x98); + } else if (intp->chip_id >= 0x20) { + stv0900_write_reg(intp, CARFREQ, 0x6a); + stv0900_write_reg(intp, SFRSTEP, 0x95); + } else { + stv0900_write_reg(intp, CARFREQ, 0xed); + stv0900_write_reg(intp, SFRSTEP, 0x73); + } + + if (intp->symbol_rate[demod] <= 2000000) + currier_step = 1000; + else if (intp->symbol_rate[demod] <= 5000000) + currier_step = 2000; + else if (intp->symbol_rate[demod] <= 12000000) + currier_step = 3000; + else + currier_step = 5000; + + nb_steps = -1 + ((intp->srch_range[demod] / 1000) / currier_step); + nb_steps /= 2; + nb_steps = (2 * nb_steps) + 1; + + if (nb_steps < 0) + nb_steps = 1; + else if (nb_steps > 10) { + nb_steps = 11; + currier_step = (intp->srch_range[demod] / 1000) / 10; + } + + current_step = 0; + direction = 1; + + tuner_freq = intp->freq[demod]; + + while ((timing_lck == FALSE) && (current_step < nb_steps)) { + stv0900_write_reg(intp, DMDISTATE, 0x5f); + stv0900_write_bits(intp, DEMOD_MODE, 0); + + msleep(50); + + for (i = 0; i < 10; i++) { + if (stv0900_get_bits(intp, TMGLOCK_QUALITY) >= 2) + timingcpt++; + + agc2_integr += (stv0900_read_reg(intp, AGC2I1) << 8) | + stv0900_read_reg(intp, AGC2I0); + } + + agc2_integr /= 10; + coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod); + current_step++; + direction *= -1; + + dprintk("lock: I2C_DEMOD_MODE_FIELD =0. Search started." + " tuner freq=%d agc2=0x%x srate_coarse=%d tmg_cpt=%d\n", + tuner_freq, agc2_integr, coarse_srate, timingcpt); + + if ((timingcpt >= 5) && + (agc2_integr < agc2_th) && + (coarse_srate < 55000000) && + (coarse_srate > 850000)) + timing_lck = TRUE; + else if (current_step < nb_steps) { + if (direction > 0) + tuner_freq += (current_step * currier_step); + else + tuner_freq -= (current_step * currier_step); + + if (intp->tuner_type[demod] == 3) + stv0900_set_tuner_auto(intp, tuner_freq, + intp->bw[demod], demod); + else + stv0900_set_tuner(fe, tuner_freq, + intp->bw[demod]); + } + } + + if (timing_lck == FALSE) + coarse_srate = 0; + else + coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod); + + return coarse_srate; +} + +static u32 stv0900_search_srate_fine(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + u32 coarse_srate, + coarse_freq, + symb, + symbmax, + symbmin, + symbcomp; + + coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod); + + if (coarse_srate > 3000000) { + symbmax = 13 * (coarse_srate / 10); + symbmax = (symbmax / 1000) * 65536; + symbmax /= (intp->mclk / 1000); + + symbmin = 10 * (coarse_srate / 13); + symbmin = (symbmin / 1000)*65536; + symbmin /= (intp->mclk / 1000); + + symb = (coarse_srate / 1000) * 65536; + symb /= (intp->mclk / 1000); + } else { + symbmax = 13 * (coarse_srate / 10); + symbmax = (symbmax / 100) * 65536; + symbmax /= (intp->mclk / 100); + + symbmin = 10 * (coarse_srate / 14); + symbmin = (symbmin / 100) * 65536; + symbmin /= (intp->mclk / 100); + + symb = (coarse_srate / 100) * 65536; + symb /= (intp->mclk / 100); + } + + symbcomp = 13 * (coarse_srate / 10); + coarse_freq = (stv0900_read_reg(intp, CFR2) << 8) + | stv0900_read_reg(intp, CFR1); + + if (symbcomp < intp->symbol_rate[demod]) + coarse_srate = 0; + else { + stv0900_write_reg(intp, DMDISTATE, 0x1f); + stv0900_write_reg(intp, TMGCFG2, 0xc1); + stv0900_write_reg(intp, TMGTHRISE, 0x20); + stv0900_write_reg(intp, TMGTHFALL, 0x00); + stv0900_write_reg(intp, TMGCFG, 0xd2); + stv0900_write_bits(intp, CFR_AUTOSCAN, 0); + stv0900_write_reg(intp, AGC2REF, 0x38); + + if (intp->chip_id >= 0x30) + stv0900_write_reg(intp, CARFREQ, 0x79); + else if (intp->chip_id >= 0x20) + stv0900_write_reg(intp, CARFREQ, 0x49); + else + stv0900_write_reg(intp, CARFREQ, 0xed); + + stv0900_write_reg(intp, SFRUP1, (symbmax >> 8) & 0x7f); + stv0900_write_reg(intp, SFRUP0, (symbmax & 0xff)); + + stv0900_write_reg(intp, SFRLOW1, (symbmin >> 8) & 0x7f); + stv0900_write_reg(intp, SFRLOW0, (symbmin & 0xff)); + + stv0900_write_reg(intp, SFRINIT1, (symb >> 8) & 0xff); + stv0900_write_reg(intp, SFRINIT0, (symb & 0xff)); + + stv0900_write_reg(intp, DMDT0M, 0x20); + stv0900_write_reg(intp, CFRINIT1, (coarse_freq >> 8) & 0xff); + stv0900_write_reg(intp, CFRINIT0, coarse_freq & 0xff); + stv0900_write_reg(intp, DMDISTATE, 0x15); + } + + return coarse_srate; +} + +static int stv0900_blind_search_algo(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + u8 k_ref_tmg, + k_ref_tmg_max, + k_ref_tmg_min; + u32 coarse_srate, + agc2_th; + int lock = FALSE, + coarse_fail = FALSE; + s32 demod_timeout = 500, + fec_timeout = 50, + fail_cpt, + i, + agc2_overflow; + u16 agc2_int; + u8 dstatus2; + + dprintk("%s\n", __func__); + + if (intp->chip_id < 0x20) { + k_ref_tmg_max = 233; + k_ref_tmg_min = 143; + } else { + k_ref_tmg_max = 110; + k_ref_tmg_min = 10; + } + + if (intp->chip_id <= 0x20) + agc2_th = STV0900_BLIND_SEARCH_AGC2_TH; + else + agc2_th = STV0900_BLIND_SEARCH_AGC2_TH_CUT30; + + agc2_int = stv0900_blind_check_agc2_min_level(intp, demod); + + dprintk("%s agc2_int=%d agc2_th=%d \n", __func__, agc2_int, agc2_th); + if (agc2_int > agc2_th) + return FALSE; + + if (intp->chip_id == 0x10) + stv0900_write_reg(intp, CORRELEXP, 0xaa); + + if (intp->chip_id < 0x20) + stv0900_write_reg(intp, CARHDR, 0x55); + else + stv0900_write_reg(intp, CARHDR, 0x20); + + if (intp->chip_id <= 0x20) + stv0900_write_reg(intp, CARCFG, 0xc4); + else + stv0900_write_reg(intp, CARCFG, 0x6); + + stv0900_write_reg(intp, RTCS2, 0x44); + + if (intp->chip_id >= 0x20) { + stv0900_write_reg(intp, EQUALCFG, 0x41); + stv0900_write_reg(intp, FFECFG, 0x41); + stv0900_write_reg(intp, VITSCALE, 0x82); + stv0900_write_reg(intp, VAVSRVIT, 0x0); + } + + k_ref_tmg = k_ref_tmg_max; + + do { + stv0900_write_reg(intp, KREFTMG, k_ref_tmg); + if (stv0900_search_srate_coarse(fe) != 0) { + coarse_srate = stv0900_search_srate_fine(fe); + + if (coarse_srate != 0) { + stv0900_get_lock_timeout(&demod_timeout, + &fec_timeout, + coarse_srate, + STV0900_BLIND_SEARCH); + lock = stv0900_get_demod_lock(intp, + demod, + demod_timeout); + } else + lock = FALSE; + } else { + fail_cpt = 0; + agc2_overflow = 0; + + for (i = 0; i < 10; i++) { + agc2_int = (stv0900_read_reg(intp, AGC2I1) << 8) + | stv0900_read_reg(intp, AGC2I0); + + if (agc2_int >= 0xff00) + agc2_overflow++; + + dstatus2 = stv0900_read_reg(intp, DSTATUS2); + + if (((dstatus2 & 0x1) == 0x1) && + ((dstatus2 >> 7) == 1)) + fail_cpt++; + } + + if ((fail_cpt > 7) || (agc2_overflow > 7)) + coarse_fail = TRUE; + + lock = FALSE; + } + k_ref_tmg -= 30; + } while ((k_ref_tmg >= k_ref_tmg_min) && + (lock == FALSE) && + (coarse_fail == FALSE)); + + return lock; +} + +static void stv0900_set_viterbi_acq(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + s32 vth_reg = VTH12; + + dprintk("%s\n", __func__); + + stv0900_write_reg(intp, vth_reg++, 0x96); + stv0900_write_reg(intp, vth_reg++, 0x64); + stv0900_write_reg(intp, vth_reg++, 0x36); + stv0900_write_reg(intp, vth_reg++, 0x23); + stv0900_write_reg(intp, vth_reg++, 0x1e); + stv0900_write_reg(intp, vth_reg++, 0x19); +} + +static void stv0900_set_search_standard(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod) +{ + + dprintk("%s\n", __func__); + + switch (intp->srch_standard[demod]) { + case STV0900_SEARCH_DVBS1: + dprintk("Search Standard = DVBS1\n"); + break; + case STV0900_SEARCH_DSS: + dprintk("Search Standard = DSS\n"); + case STV0900_SEARCH_DVBS2: + break; + dprintk("Search Standard = DVBS2\n"); + case STV0900_AUTO_SEARCH: + default: + dprintk("Search Standard = AUTO\n"); + break; + } + + switch (intp->srch_standard[demod]) { + case STV0900_SEARCH_DVBS1: + case STV0900_SEARCH_DSS: + stv0900_write_bits(intp, DVBS1_ENABLE, 1); + stv0900_write_bits(intp, DVBS2_ENABLE, 0); + stv0900_write_bits(intp, STOP_CLKVIT, 0); + stv0900_set_dvbs1_track_car_loop(intp, + demod, + intp->symbol_rate[demod]); + stv0900_write_reg(intp, CAR2CFG, 0x22); + + stv0900_set_viterbi_acq(intp, demod); + stv0900_set_viterbi_standard(intp, + intp->srch_standard[demod], + intp->fec[demod], demod); + + break; + case STV0900_SEARCH_DVBS2: + stv0900_write_bits(intp, DVBS1_ENABLE, 0); + stv0900_write_bits(intp, DVBS2_ENABLE, 1); + stv0900_write_bits(intp, STOP_CLKVIT, 1); + stv0900_write_reg(intp, ACLC, 0x1a); + stv0900_write_reg(intp, BCLC, 0x09); + if (intp->chip_id <= 0x20) /*cut 1.x and 2.0*/ + stv0900_write_reg(intp, CAR2CFG, 0x26); + else + stv0900_write_reg(intp, CAR2CFG, 0x66); + + if (intp->demod_mode != STV0900_SINGLE) { + if (intp->chip_id <= 0x11) + stv0900_stop_all_s2_modcod(intp, demod); + else + stv0900_activate_s2_modcod(intp, demod); + + } else + stv0900_activate_s2_modcod_single(intp, demod); + + stv0900_set_viterbi_tracq(intp, demod); + + break; + case STV0900_AUTO_SEARCH: + default: + stv0900_write_bits(intp, DVBS1_ENABLE, 1); + stv0900_write_bits(intp, DVBS2_ENABLE, 1); + stv0900_write_bits(intp, STOP_CLKVIT, 0); + stv0900_write_reg(intp, ACLC, 0x1a); + stv0900_write_reg(intp, BCLC, 0x09); + stv0900_set_dvbs1_track_car_loop(intp, + demod, + intp->symbol_rate[demod]); + if (intp->chip_id <= 0x20) /*cut 1.x and 2.0*/ + stv0900_write_reg(intp, CAR2CFG, 0x26); + else + stv0900_write_reg(intp, CAR2CFG, 0x66); + + if (intp->demod_mode != STV0900_SINGLE) { + if (intp->chip_id <= 0x11) + stv0900_stop_all_s2_modcod(intp, demod); + else + stv0900_activate_s2_modcod(intp, demod); + + } else + stv0900_activate_s2_modcod_single(intp, demod); + + stv0900_set_viterbi_tracq(intp, demod); + stv0900_set_viterbi_standard(intp, + intp->srch_standard[demod], + intp->fec[demod], demod); + + break; + } +} + +enum fe_stv0900_signal_type stv0900_algo(struct dvb_frontend *fe) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *intp = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + + s32 demod_timeout = 500, fec_timeout = 50; + s32 aq_power, agc1_power, i; + + int lock = FALSE, low_sr = FALSE; + + enum fe_stv0900_signal_type signal_type = STV0900_NOCARRIER; + enum fe_stv0900_search_algo algo; + int no_signal = FALSE; + + dprintk("%s\n", __func__); + + algo = intp->srch_algo[demod]; + stv0900_write_bits(intp, RST_HWARE, 1); + stv0900_write_reg(intp, DMDISTATE, 0x5c); + if (intp->chip_id >= 0x20) { + if (intp->symbol_rate[demod] > 5000000) + stv0900_write_reg(intp, CORRELABS, 0x9e); + else + stv0900_write_reg(intp, CORRELABS, 0x82); + } else + stv0900_write_reg(intp, CORRELABS, 0x88); + + stv0900_get_lock_timeout(&demod_timeout, &fec_timeout, + intp->symbol_rate[demod], + intp->srch_algo[demod]); + + if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH) { + intp->bw[demod] = 2 * 36000000; + + stv0900_write_reg(intp, TMGCFG2, 0xc0); + stv0900_write_reg(intp, CORRELMANT, 0x70); + + stv0900_set_symbol_rate(intp, intp->mclk, 1000000, demod); + } else { + stv0900_write_reg(intp, DMDT0M, 0x20); + stv0900_write_reg(intp, TMGCFG, 0xd2); + + if (intp->symbol_rate[demod] < 2000000) + stv0900_write_reg(intp, CORRELMANT, 0x63); + else + stv0900_write_reg(intp, CORRELMANT, 0x70); + + stv0900_write_reg(intp, AGC2REF, 0x38); + + intp->bw[demod] = + stv0900_carrier_width(intp->symbol_rate[demod], + intp->rolloff); + if (intp->chip_id >= 0x20) { + stv0900_write_reg(intp, KREFTMG, 0x5a); + + if (intp->srch_algo[demod] == STV0900_COLD_START) { + intp->bw[demod] += 10000000; + intp->bw[demod] *= 15; + intp->bw[demod] /= 10; + } else if (intp->srch_algo[demod] == STV0900_WARM_START) + intp->bw[demod] += 10000000; + + } else { + stv0900_write_reg(intp, KREFTMG, 0xc1); + intp->bw[demod] += 10000000; + intp->bw[demod] *= 15; + intp->bw[demod] /= 10; + } + + stv0900_write_reg(intp, TMGCFG2, 0xc1); + + stv0900_set_symbol_rate(intp, intp->mclk, + intp->symbol_rate[demod], demod); + stv0900_set_max_symbol_rate(intp, intp->mclk, + intp->symbol_rate[demod], demod); + stv0900_set_min_symbol_rate(intp, intp->mclk, + intp->symbol_rate[demod], demod); + if (intp->symbol_rate[demod] >= 10000000) + low_sr = FALSE; + else + low_sr = TRUE; + + } + + if (intp->tuner_type[demod] == 3) + stv0900_set_tuner_auto(intp, intp->freq[demod], + intp->bw[demod], demod); + else + stv0900_set_tuner(fe, intp->freq[demod], intp->bw[demod]); + + agc1_power = MAKEWORD(stv0900_get_bits(intp, AGCIQ_VALUE1), + stv0900_get_bits(intp, AGCIQ_VALUE0)); + + aq_power = 0; + + if (agc1_power == 0) { + for (i = 0; i < 5; i++) + aq_power += (stv0900_get_bits(intp, POWER_I) + + stv0900_get_bits(intp, POWER_Q)) / 2; + + aq_power /= 5; + } + + if ((agc1_power == 0) && (aq_power < IQPOWER_THRESHOLD)) { + intp->result[demod].locked = FALSE; + signal_type = STV0900_NOAGC1; + dprintk("%s: NO AGC1, POWERI, POWERQ\n", __func__); + } else { + stv0900_write_bits(intp, SPECINV_CONTROL, + intp->srch_iq_inv[demod]); + if (intp->chip_id <= 0x20) /*cut 2.0*/ + stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1); + else /*cut 3.0*/ + stv0900_write_bits(intp, MANUALS2_ROLLOFF, 1); + + stv0900_set_search_standard(intp, demod); + + if (intp->srch_algo[demod] != STV0900_BLIND_SEARCH) + stv0900_start_search(intp, demod); + } + + if (signal_type == STV0900_NOAGC1) + return signal_type; + + if (intp->chip_id == 0x12) { + stv0900_write_bits(intp, RST_HWARE, 0); + msleep(3); + stv0900_write_bits(intp, RST_HWARE, 1); + stv0900_write_bits(intp, RST_HWARE, 0); + } + + if (algo == STV0900_BLIND_SEARCH) + lock = stv0900_blind_search_algo(fe); + else if (algo == STV0900_COLD_START) + lock = stv0900_get_demod_cold_lock(fe, demod_timeout); + else if (algo == STV0900_WARM_START) + lock = stv0900_get_demod_lock(intp, demod, demod_timeout); + + if ((lock == FALSE) && (algo == STV0900_COLD_START)) { + if (low_sr == FALSE) { + if (stv0900_check_timing_lock(intp, demod) == TRUE) + lock = stv0900_sw_algo(intp, demod); + } + } + + if (lock == TRUE) + signal_type = stv0900_get_signal_params(fe); + + if ((lock == TRUE) && (signal_type == STV0900_RANGEOK)) { + stv0900_track_optimization(fe); + if (intp->chip_id <= 0x11) { + if ((stv0900_get_standard(fe, 0) == + STV0900_DVBS1_STANDARD) && + (stv0900_get_standard(fe, 1) == + STV0900_DVBS1_STANDARD)) { + msleep(20); + stv0900_write_bits(intp, RST_HWARE, 0); + } else { + stv0900_write_bits(intp, RST_HWARE, 0); + msleep(3); + stv0900_write_bits(intp, RST_HWARE, 1); + stv0900_write_bits(intp, RST_HWARE, 0); + } + + } else if (intp->chip_id >= 0x20) { + stv0900_write_bits(intp, RST_HWARE, 0); + msleep(3); + stv0900_write_bits(intp, RST_HWARE, 1); + stv0900_write_bits(intp, RST_HWARE, 0); + } + + if (stv0900_wait_for_lock(intp, demod, + fec_timeout, fec_timeout) == TRUE) { + lock = TRUE; + intp->result[demod].locked = TRUE; + if (intp->result[demod].standard == + STV0900_DVBS2_STANDARD) { + stv0900_set_dvbs2_rolloff(intp, demod); + stv0900_write_bits(intp, RESET_UPKO_COUNT, 1); + stv0900_write_bits(intp, RESET_UPKO_COUNT, 0); + stv0900_write_reg(intp, ERRCTRL1, 0x67); + } else { + stv0900_write_reg(intp, ERRCTRL1, 0x75); + } + + stv0900_write_reg(intp, FBERCPT4, 0); + stv0900_write_reg(intp, ERRCTRL2, 0xc1); + } else { + lock = FALSE; + signal_type = STV0900_NODATA; + no_signal = stv0900_check_signal_presence(intp, demod); + + intp->result[demod].locked = FALSE; + } + } + + if ((signal_type != STV0900_NODATA) || (no_signal != FALSE)) + return signal_type; + + if (intp->chip_id > 0x11) { + intp->result[demod].locked = FALSE; + return signal_type; + } + + if ((stv0900_get_bits(intp, HEADER_MODE) == STV0900_DVBS_FOUND) && + (intp->srch_iq_inv[demod] <= STV0900_IQ_AUTO_NORMAL_FIRST)) + signal_type = stv0900_dvbs1_acq_workaround(fe); + + return signal_type; +} + diff --git a/drivers/media/dvb-frontends/stv090x.c b/drivers/media/dvb-frontends/stv090x.c new file mode 100644 index 00000000..23e872f8 --- /dev/null +++ b/drivers/media/dvb-frontends/stv090x.c @@ -0,0 +1,4990 @@ +/* + STV0900/0903 Multistandard Broadcast Frontend driver + Copyright (C) Manu Abraham + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include "dvb_frontend.h" + +#include "stv6110x.h" /* for demodulator internal modes */ + +#include "stv090x_reg.h" +#include "stv090x.h" +#include "stv090x_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +static unsigned int verbose; +module_param(verbose, int, 0644); + +/* internal params node */ +struct stv090x_dev { + /* pointer for internal params, one for each pair of demods */ + struct stv090x_internal *internal; + struct stv090x_dev *next_dev; +}; + +/* first internal params */ +static struct stv090x_dev *stv090x_first_dev; + +/* find chip by i2c adapter and i2c address */ +static struct stv090x_dev *find_dev(struct i2c_adapter *i2c_adap, + u8 i2c_addr) +{ + struct stv090x_dev *temp_dev = stv090x_first_dev; + + /* + Search of the last stv0900 chip or + find it by i2c adapter and i2c address */ + while ((temp_dev != NULL) && + ((temp_dev->internal->i2c_adap != i2c_adap) || + (temp_dev->internal->i2c_addr != i2c_addr))) { + + temp_dev = temp_dev->next_dev; + } + + return temp_dev; +} + +/* deallocating chip */ +static void remove_dev(struct stv090x_internal *internal) +{ + struct stv090x_dev *prev_dev = stv090x_first_dev; + struct stv090x_dev *del_dev = find_dev(internal->i2c_adap, + internal->i2c_addr); + + if (del_dev != NULL) { + if (del_dev == stv090x_first_dev) { + stv090x_first_dev = del_dev->next_dev; + } else { + while (prev_dev->next_dev != del_dev) + prev_dev = prev_dev->next_dev; + + prev_dev->next_dev = del_dev->next_dev; + } + + kfree(del_dev); + } +} + +/* allocating new chip */ +static struct stv090x_dev *append_internal(struct stv090x_internal *internal) +{ + struct stv090x_dev *new_dev; + struct stv090x_dev *temp_dev; + + new_dev = kmalloc(sizeof(struct stv090x_dev), GFP_KERNEL); + if (new_dev != NULL) { + new_dev->internal = internal; + new_dev->next_dev = NULL; + + /* append to list */ + if (stv090x_first_dev == NULL) { + stv090x_first_dev = new_dev; + } else { + temp_dev = stv090x_first_dev; + while (temp_dev->next_dev != NULL) + temp_dev = temp_dev->next_dev; + + temp_dev->next_dev = new_dev; + } + } + + return new_dev; +} + + +/* DVBS1 and DSS C/N Lookup table */ +static const struct stv090x_tab stv090x_s1cn_tab[] = { + { 0, 8917 }, /* 0.0dB */ + { 5, 8801 }, /* 0.5dB */ + { 10, 8667 }, /* 1.0dB */ + { 15, 8522 }, /* 1.5dB */ + { 20, 8355 }, /* 2.0dB */ + { 25, 8175 }, /* 2.5dB */ + { 30, 7979 }, /* 3.0dB */ + { 35, 7763 }, /* 3.5dB */ + { 40, 7530 }, /* 4.0dB */ + { 45, 7282 }, /* 4.5dB */ + { 50, 7026 }, /* 5.0dB */ + { 55, 6781 }, /* 5.5dB */ + { 60, 6514 }, /* 6.0dB */ + { 65, 6241 }, /* 6.5dB */ + { 70, 5965 }, /* 7.0dB */ + { 75, 5690 }, /* 7.5dB */ + { 80, 5424 }, /* 8.0dB */ + { 85, 5161 }, /* 8.5dB */ + { 90, 4902 }, /* 9.0dB */ + { 95, 4654 }, /* 9.5dB */ + { 100, 4417 }, /* 10.0dB */ + { 105, 4186 }, /* 10.5dB */ + { 110, 3968 }, /* 11.0dB */ + { 115, 3757 }, /* 11.5dB */ + { 120, 3558 }, /* 12.0dB */ + { 125, 3366 }, /* 12.5dB */ + { 130, 3185 }, /* 13.0dB */ + { 135, 3012 }, /* 13.5dB */ + { 140, 2850 }, /* 14.0dB */ + { 145, 2698 }, /* 14.5dB */ + { 150, 2550 }, /* 15.0dB */ + { 160, 2283 }, /* 16.0dB */ + { 170, 2042 }, /* 17.0dB */ + { 180, 1827 }, /* 18.0dB */ + { 190, 1636 }, /* 19.0dB */ + { 200, 1466 }, /* 20.0dB */ + { 210, 1315 }, /* 21.0dB */ + { 220, 1181 }, /* 22.0dB */ + { 230, 1064 }, /* 23.0dB */ + { 240, 960 }, /* 24.0dB */ + { 250, 869 }, /* 25.0dB */ + { 260, 792 }, /* 26.0dB */ + { 270, 724 }, /* 27.0dB */ + { 280, 665 }, /* 28.0dB */ + { 290, 616 }, /* 29.0dB */ + { 300, 573 }, /* 30.0dB */ + { 310, 537 }, /* 31.0dB */ + { 320, 507 }, /* 32.0dB */ + { 330, 483 }, /* 33.0dB */ + { 400, 398 }, /* 40.0dB */ + { 450, 381 }, /* 45.0dB */ + { 500, 377 } /* 50.0dB */ +}; + +/* DVBS2 C/N Lookup table */ +static const struct stv090x_tab stv090x_s2cn_tab[] = { + { -30, 13348 }, /* -3.0dB */ + { -20, 12640 }, /* -2d.0B */ + { -10, 11883 }, /* -1.0dB */ + { 0, 11101 }, /* -0.0dB */ + { 5, 10718 }, /* 0.5dB */ + { 10, 10339 }, /* 1.0dB */ + { 15, 9947 }, /* 1.5dB */ + { 20, 9552 }, /* 2.0dB */ + { 25, 9183 }, /* 2.5dB */ + { 30, 8799 }, /* 3.0dB */ + { 35, 8422 }, /* 3.5dB */ + { 40, 8062 }, /* 4.0dB */ + { 45, 7707 }, /* 4.5dB */ + { 50, 7353 }, /* 5.0dB */ + { 55, 7025 }, /* 5.5dB */ + { 60, 6684 }, /* 6.0dB */ + { 65, 6331 }, /* 6.5dB */ + { 70, 6036 }, /* 7.0dB */ + { 75, 5727 }, /* 7.5dB */ + { 80, 5437 }, /* 8.0dB */ + { 85, 5164 }, /* 8.5dB */ + { 90, 4902 }, /* 9.0dB */ + { 95, 4653 }, /* 9.5dB */ + { 100, 4408 }, /* 10.0dB */ + { 105, 4187 }, /* 10.5dB */ + { 110, 3961 }, /* 11.0dB */ + { 115, 3751 }, /* 11.5dB */ + { 120, 3558 }, /* 12.0dB */ + { 125, 3368 }, /* 12.5dB */ + { 130, 3191 }, /* 13.0dB */ + { 135, 3017 }, /* 13.5dB */ + { 140, 2862 }, /* 14.0dB */ + { 145, 2710 }, /* 14.5dB */ + { 150, 2565 }, /* 15.0dB */ + { 160, 2300 }, /* 16.0dB */ + { 170, 2058 }, /* 17.0dB */ + { 180, 1849 }, /* 18.0dB */ + { 190, 1663 }, /* 19.0dB */ + { 200, 1495 }, /* 20.0dB */ + { 210, 1349 }, /* 21.0dB */ + { 220, 1222 }, /* 22.0dB */ + { 230, 1110 }, /* 23.0dB */ + { 240, 1011 }, /* 24.0dB */ + { 250, 925 }, /* 25.0dB */ + { 260, 853 }, /* 26.0dB */ + { 270, 789 }, /* 27.0dB */ + { 280, 734 }, /* 28.0dB */ + { 290, 690 }, /* 29.0dB */ + { 300, 650 }, /* 30.0dB */ + { 310, 619 }, /* 31.0dB */ + { 320, 593 }, /* 32.0dB */ + { 330, 571 }, /* 33.0dB */ + { 400, 498 }, /* 40.0dB */ + { 450, 484 }, /* 45.0dB */ + { 500, 481 } /* 50.0dB */ +}; + +/* RF level C/N lookup table */ +static const struct stv090x_tab stv090x_rf_tab[] = { + { -5, 0xcaa1 }, /* -5dBm */ + { -10, 0xc229 }, /* -10dBm */ + { -15, 0xbb08 }, /* -15dBm */ + { -20, 0xb4bc }, /* -20dBm */ + { -25, 0xad5a }, /* -25dBm */ + { -30, 0xa298 }, /* -30dBm */ + { -35, 0x98a8 }, /* -35dBm */ + { -40, 0x8389 }, /* -40dBm */ + { -45, 0x59be }, /* -45dBm */ + { -50, 0x3a14 }, /* -50dBm */ + { -55, 0x2d11 }, /* -55dBm */ + { -60, 0x210d }, /* -60dBm */ + { -65, 0xa14f }, /* -65dBm */ + { -70, 0x07aa } /* -70dBm */ +}; + + +static struct stv090x_reg stv0900_initval[] = { + + { STV090x_OUTCFG, 0x00 }, + { STV090x_MODECFG, 0xff }, + { STV090x_AGCRF1CFG, 0x11 }, + { STV090x_AGCRF2CFG, 0x13 }, + { STV090x_TSGENERAL1X, 0x14 }, + { STV090x_TSTTNR2, 0x21 }, + { STV090x_TSTTNR4, 0x21 }, + { STV090x_P2_DISTXCTL, 0x22 }, + { STV090x_P2_F22TX, 0xc0 }, + { STV090x_P2_F22RX, 0xc0 }, + { STV090x_P2_DISRXCTL, 0x00 }, + { STV090x_P2_DMDCFGMD, 0xF9 }, + { STV090x_P2_DEMOD, 0x08 }, + { STV090x_P2_DMDCFG3, 0xc4 }, + { STV090x_P2_CARFREQ, 0xed }, + { STV090x_P2_LDT, 0xd0 }, + { STV090x_P2_LDT2, 0xb8 }, + { STV090x_P2_TMGCFG, 0xd2 }, + { STV090x_P2_TMGTHRISE, 0x20 }, + { STV090x_P1_TMGCFG, 0xd2 }, + + { STV090x_P2_TMGTHFALL, 0x00 }, + { STV090x_P2_FECSPY, 0x88 }, + { STV090x_P2_FSPYDATA, 0x3a }, + { STV090x_P2_FBERCPT4, 0x00 }, + { STV090x_P2_FSPYBER, 0x10 }, + { STV090x_P2_ERRCTRL1, 0x35 }, + { STV090x_P2_ERRCTRL2, 0xc1 }, + { STV090x_P2_CFRICFG, 0xf8 }, + { STV090x_P2_NOSCFG, 0x1c }, + { STV090x_P2_DMDTOM, 0x20 }, + { STV090x_P2_CORRELMANT, 0x70 }, + { STV090x_P2_CORRELABS, 0x88 }, + { STV090x_P2_AGC2O, 0x5b }, + { STV090x_P2_AGC2REF, 0x38 }, + { STV090x_P2_CARCFG, 0xe4 }, + { STV090x_P2_ACLC, 0x1A }, + { STV090x_P2_BCLC, 0x09 }, + { STV090x_P2_CARHDR, 0x08 }, + { STV090x_P2_KREFTMG, 0xc1 }, + { STV090x_P2_SFRUPRATIO, 0xf0 }, + { STV090x_P2_SFRLOWRATIO, 0x70 }, + { STV090x_P2_SFRSTEP, 0x58 }, + { STV090x_P2_TMGCFG2, 0x01 }, + { STV090x_P2_CAR2CFG, 0x26 }, + { STV090x_P2_BCLC2S2Q, 0x86 }, + { STV090x_P2_BCLC2S28, 0x86 }, + { STV090x_P2_SMAPCOEF7, 0x77 }, + { STV090x_P2_SMAPCOEF6, 0x85 }, + { STV090x_P2_SMAPCOEF5, 0x77 }, + { STV090x_P2_TSCFGL, 0x20 }, + { STV090x_P2_DMDCFG2, 0x3b }, + { STV090x_P2_MODCODLST0, 0xff }, + { STV090x_P2_MODCODLST1, 0xff }, + { STV090x_P2_MODCODLST2, 0xff }, + { STV090x_P2_MODCODLST3, 0xff }, + { STV090x_P2_MODCODLST4, 0xff }, + { STV090x_P2_MODCODLST5, 0xff }, + { STV090x_P2_MODCODLST6, 0xff }, + { STV090x_P2_MODCODLST7, 0xcc }, + { STV090x_P2_MODCODLST8, 0xcc }, + { STV090x_P2_MODCODLST9, 0xcc }, + { STV090x_P2_MODCODLSTA, 0xcc }, + { STV090x_P2_MODCODLSTB, 0xcc }, + { STV090x_P2_MODCODLSTC, 0xcc }, + { STV090x_P2_MODCODLSTD, 0xcc }, + { STV090x_P2_MODCODLSTE, 0xcc }, + { STV090x_P2_MODCODLSTF, 0xcf }, + { STV090x_P1_DISTXCTL, 0x22 }, + { STV090x_P1_F22TX, 0xc0 }, + { STV090x_P1_F22RX, 0xc0 }, + { STV090x_P1_DISRXCTL, 0x00 }, + { STV090x_P1_DMDCFGMD, 0xf9 }, + { STV090x_P1_DEMOD, 0x08 }, + { STV090x_P1_DMDCFG3, 0xc4 }, + { STV090x_P1_DMDTOM, 0x20 }, + { STV090x_P1_CARFREQ, 0xed }, + { STV090x_P1_LDT, 0xd0 }, + { STV090x_P1_LDT2, 0xb8 }, + { STV090x_P1_TMGCFG, 0xd2 }, + { STV090x_P1_TMGTHRISE, 0x20 }, + { STV090x_P1_TMGTHFALL, 0x00 }, + { STV090x_P1_SFRUPRATIO, 0xf0 }, + { STV090x_P1_SFRLOWRATIO, 0x70 }, + { STV090x_P1_TSCFGL, 0x20 }, + { STV090x_P1_FECSPY, 0x88 }, + { STV090x_P1_FSPYDATA, 0x3a }, + { STV090x_P1_FBERCPT4, 0x00 }, + { STV090x_P1_FSPYBER, 0x10 }, + { STV090x_P1_ERRCTRL1, 0x35 }, + { STV090x_P1_ERRCTRL2, 0xc1 }, + { STV090x_P1_CFRICFG, 0xf8 }, + { STV090x_P1_NOSCFG, 0x1c }, + { STV090x_P1_CORRELMANT, 0x70 }, + { STV090x_P1_CORRELABS, 0x88 }, + { STV090x_P1_AGC2O, 0x5b }, + { STV090x_P1_AGC2REF, 0x38 }, + { STV090x_P1_CARCFG, 0xe4 }, + { STV090x_P1_ACLC, 0x1A }, + { STV090x_P1_BCLC, 0x09 }, + { STV090x_P1_CARHDR, 0x08 }, + { STV090x_P1_KREFTMG, 0xc1 }, + { STV090x_P1_SFRSTEP, 0x58 }, + { STV090x_P1_TMGCFG2, 0x01 }, + { STV090x_P1_CAR2CFG, 0x26 }, + { STV090x_P1_BCLC2S2Q, 0x86 }, + { STV090x_P1_BCLC2S28, 0x86 }, + { STV090x_P1_SMAPCOEF7, 0x77 }, + { STV090x_P1_SMAPCOEF6, 0x85 }, + { STV090x_P1_SMAPCOEF5, 0x77 }, + { STV090x_P1_DMDCFG2, 0x3b }, + { STV090x_P1_MODCODLST0, 0xff }, + { STV090x_P1_MODCODLST1, 0xff }, + { STV090x_P1_MODCODLST2, 0xff }, + { STV090x_P1_MODCODLST3, 0xff }, + { STV090x_P1_MODCODLST4, 0xff }, + { STV090x_P1_MODCODLST5, 0xff }, + { STV090x_P1_MODCODLST6, 0xff }, + { STV090x_P1_MODCODLST7, 0xcc }, + { STV090x_P1_MODCODLST8, 0xcc }, + { STV090x_P1_MODCODLST9, 0xcc }, + { STV090x_P1_MODCODLSTA, 0xcc }, + { STV090x_P1_MODCODLSTB, 0xcc }, + { STV090x_P1_MODCODLSTC, 0xcc }, + { STV090x_P1_MODCODLSTD, 0xcc }, + { STV090x_P1_MODCODLSTE, 0xcc }, + { STV090x_P1_MODCODLSTF, 0xcf }, + { STV090x_GENCFG, 0x1d }, + { STV090x_NBITER_NF4, 0x37 }, + { STV090x_NBITER_NF5, 0x29 }, + { STV090x_NBITER_NF6, 0x37 }, + { STV090x_NBITER_NF7, 0x33 }, + { STV090x_NBITER_NF8, 0x31 }, + { STV090x_NBITER_NF9, 0x2f }, + { STV090x_NBITER_NF10, 0x39 }, + { STV090x_NBITER_NF11, 0x3a }, + { STV090x_NBITER_NF12, 0x29 }, + { STV090x_NBITER_NF13, 0x37 }, + { STV090x_NBITER_NF14, 0x33 }, + { STV090x_NBITER_NF15, 0x2f }, + { STV090x_NBITER_NF16, 0x39 }, + { STV090x_NBITER_NF17, 0x3a }, + { STV090x_NBITERNOERR, 0x04 }, + { STV090x_GAINLLR_NF4, 0x0C }, + { STV090x_GAINLLR_NF5, 0x0F }, + { STV090x_GAINLLR_NF6, 0x11 }, + { STV090x_GAINLLR_NF7, 0x14 }, + { STV090x_GAINLLR_NF8, 0x17 }, + { STV090x_GAINLLR_NF9, 0x19 }, + { STV090x_GAINLLR_NF10, 0x20 }, + { STV090x_GAINLLR_NF11, 0x21 }, + { STV090x_GAINLLR_NF12, 0x0D }, + { STV090x_GAINLLR_NF13, 0x0F }, + { STV090x_GAINLLR_NF14, 0x13 }, + { STV090x_GAINLLR_NF15, 0x1A }, + { STV090x_GAINLLR_NF16, 0x1F }, + { STV090x_GAINLLR_NF17, 0x21 }, + { STV090x_RCCFGH, 0x20 }, + { STV090x_P1_FECM, 0x01 }, /* disable DSS modes */ + { STV090x_P2_FECM, 0x01 }, /* disable DSS modes */ + { STV090x_P1_PRVIT, 0x2F }, /* disable PR 6/7 */ + { STV090x_P2_PRVIT, 0x2F }, /* disable PR 6/7 */ +}; + +static struct stv090x_reg stv0903_initval[] = { + { STV090x_OUTCFG, 0x00 }, + { STV090x_AGCRF1CFG, 0x11 }, + { STV090x_STOPCLK1, 0x48 }, + { STV090x_STOPCLK2, 0x14 }, + { STV090x_TSTTNR1, 0x27 }, + { STV090x_TSTTNR2, 0x21 }, + { STV090x_P1_DISTXCTL, 0x22 }, + { STV090x_P1_F22TX, 0xc0 }, + { STV090x_P1_F22RX, 0xc0 }, + { STV090x_P1_DISRXCTL, 0x00 }, + { STV090x_P1_DMDCFGMD, 0xF9 }, + { STV090x_P1_DEMOD, 0x08 }, + { STV090x_P1_DMDCFG3, 0xc4 }, + { STV090x_P1_CARFREQ, 0xed }, + { STV090x_P1_TNRCFG2, 0x82 }, + { STV090x_P1_LDT, 0xd0 }, + { STV090x_P1_LDT2, 0xb8 }, + { STV090x_P1_TMGCFG, 0xd2 }, + { STV090x_P1_TMGTHRISE, 0x20 }, + { STV090x_P1_TMGTHFALL, 0x00 }, + { STV090x_P1_SFRUPRATIO, 0xf0 }, + { STV090x_P1_SFRLOWRATIO, 0x70 }, + { STV090x_P1_TSCFGL, 0x20 }, + { STV090x_P1_FECSPY, 0x88 }, + { STV090x_P1_FSPYDATA, 0x3a }, + { STV090x_P1_FBERCPT4, 0x00 }, + { STV090x_P1_FSPYBER, 0x10 }, + { STV090x_P1_ERRCTRL1, 0x35 }, + { STV090x_P1_ERRCTRL2, 0xc1 }, + { STV090x_P1_CFRICFG, 0xf8 }, + { STV090x_P1_NOSCFG, 0x1c }, + { STV090x_P1_DMDTOM, 0x20 }, + { STV090x_P1_CORRELMANT, 0x70 }, + { STV090x_P1_CORRELABS, 0x88 }, + { STV090x_P1_AGC2O, 0x5b }, + { STV090x_P1_AGC2REF, 0x38 }, + { STV090x_P1_CARCFG, 0xe4 }, + { STV090x_P1_ACLC, 0x1A }, + { STV090x_P1_BCLC, 0x09 }, + { STV090x_P1_CARHDR, 0x08 }, + { STV090x_P1_KREFTMG, 0xc1 }, + { STV090x_P1_SFRSTEP, 0x58 }, + { STV090x_P1_TMGCFG2, 0x01 }, + { STV090x_P1_CAR2CFG, 0x26 }, + { STV090x_P1_BCLC2S2Q, 0x86 }, + { STV090x_P1_BCLC2S28, 0x86 }, + { STV090x_P1_SMAPCOEF7, 0x77 }, + { STV090x_P1_SMAPCOEF6, 0x85 }, + { STV090x_P1_SMAPCOEF5, 0x77 }, + { STV090x_P1_DMDCFG2, 0x3b }, + { STV090x_P1_MODCODLST0, 0xff }, + { STV090x_P1_MODCODLST1, 0xff }, + { STV090x_P1_MODCODLST2, 0xff }, + { STV090x_P1_MODCODLST3, 0xff }, + { STV090x_P1_MODCODLST4, 0xff }, + { STV090x_P1_MODCODLST5, 0xff }, + { STV090x_P1_MODCODLST6, 0xff }, + { STV090x_P1_MODCODLST7, 0xcc }, + { STV090x_P1_MODCODLST8, 0xcc }, + { STV090x_P1_MODCODLST9, 0xcc }, + { STV090x_P1_MODCODLSTA, 0xcc }, + { STV090x_P1_MODCODLSTB, 0xcc }, + { STV090x_P1_MODCODLSTC, 0xcc }, + { STV090x_P1_MODCODLSTD, 0xcc }, + { STV090x_P1_MODCODLSTE, 0xcc }, + { STV090x_P1_MODCODLSTF, 0xcf }, + { STV090x_GENCFG, 0x1c }, + { STV090x_NBITER_NF4, 0x37 }, + { STV090x_NBITER_NF5, 0x29 }, + { STV090x_NBITER_NF6, 0x37 }, + { STV090x_NBITER_NF7, 0x33 }, + { STV090x_NBITER_NF8, 0x31 }, + { STV090x_NBITER_NF9, 0x2f }, + { STV090x_NBITER_NF10, 0x39 }, + { STV090x_NBITER_NF11, 0x3a }, + { STV090x_NBITER_NF12, 0x29 }, + { STV090x_NBITER_NF13, 0x37 }, + { STV090x_NBITER_NF14, 0x33 }, + { STV090x_NBITER_NF15, 0x2f }, + { STV090x_NBITER_NF16, 0x39 }, + { STV090x_NBITER_NF17, 0x3a }, + { STV090x_NBITERNOERR, 0x04 }, + { STV090x_GAINLLR_NF4, 0x0C }, + { STV090x_GAINLLR_NF5, 0x0F }, + { STV090x_GAINLLR_NF6, 0x11 }, + { STV090x_GAINLLR_NF7, 0x14 }, + { STV090x_GAINLLR_NF8, 0x17 }, + { STV090x_GAINLLR_NF9, 0x19 }, + { STV090x_GAINLLR_NF10, 0x20 }, + { STV090x_GAINLLR_NF11, 0x21 }, + { STV090x_GAINLLR_NF12, 0x0D }, + { STV090x_GAINLLR_NF13, 0x0F }, + { STV090x_GAINLLR_NF14, 0x13 }, + { STV090x_GAINLLR_NF15, 0x1A }, + { STV090x_GAINLLR_NF16, 0x1F }, + { STV090x_GAINLLR_NF17, 0x21 }, + { STV090x_RCCFGH, 0x20 }, + { STV090x_P1_FECM, 0x01 }, /*disable the DSS mode */ + { STV090x_P1_PRVIT, 0x2f } /*disable puncture rate 6/7*/ +}; + +static struct stv090x_reg stv0900_cut20_val[] = { + + { STV090x_P2_DMDCFG3, 0xe8 }, + { STV090x_P2_DMDCFG4, 0x10 }, + { STV090x_P2_CARFREQ, 0x38 }, + { STV090x_P2_CARHDR, 0x20 }, + { STV090x_P2_KREFTMG, 0x5a }, + { STV090x_P2_SMAPCOEF7, 0x06 }, + { STV090x_P2_SMAPCOEF6, 0x00 }, + { STV090x_P2_SMAPCOEF5, 0x04 }, + { STV090x_P2_NOSCFG, 0x0c }, + { STV090x_P1_DMDCFG3, 0xe8 }, + { STV090x_P1_DMDCFG4, 0x10 }, + { STV090x_P1_CARFREQ, 0x38 }, + { STV090x_P1_CARHDR, 0x20 }, + { STV090x_P1_KREFTMG, 0x5a }, + { STV090x_P1_SMAPCOEF7, 0x06 }, + { STV090x_P1_SMAPCOEF6, 0x00 }, + { STV090x_P1_SMAPCOEF5, 0x04 }, + { STV090x_P1_NOSCFG, 0x0c }, + { STV090x_GAINLLR_NF4, 0x21 }, + { STV090x_GAINLLR_NF5, 0x21 }, + { STV090x_GAINLLR_NF6, 0x20 }, + { STV090x_GAINLLR_NF7, 0x1F }, + { STV090x_GAINLLR_NF8, 0x1E }, + { STV090x_GAINLLR_NF9, 0x1E }, + { STV090x_GAINLLR_NF10, 0x1D }, + { STV090x_GAINLLR_NF11, 0x1B }, + { STV090x_GAINLLR_NF12, 0x20 }, + { STV090x_GAINLLR_NF13, 0x20 }, + { STV090x_GAINLLR_NF14, 0x20 }, + { STV090x_GAINLLR_NF15, 0x20 }, + { STV090x_GAINLLR_NF16, 0x20 }, + { STV090x_GAINLLR_NF17, 0x21 }, +}; + +static struct stv090x_reg stv0903_cut20_val[] = { + { STV090x_P1_DMDCFG3, 0xe8 }, + { STV090x_P1_DMDCFG4, 0x10 }, + { STV090x_P1_CARFREQ, 0x38 }, + { STV090x_P1_CARHDR, 0x20 }, + { STV090x_P1_KREFTMG, 0x5a }, + { STV090x_P1_SMAPCOEF7, 0x06 }, + { STV090x_P1_SMAPCOEF6, 0x00 }, + { STV090x_P1_SMAPCOEF5, 0x04 }, + { STV090x_P1_NOSCFG, 0x0c }, + { STV090x_GAINLLR_NF4, 0x21 }, + { STV090x_GAINLLR_NF5, 0x21 }, + { STV090x_GAINLLR_NF6, 0x20 }, + { STV090x_GAINLLR_NF7, 0x1F }, + { STV090x_GAINLLR_NF8, 0x1E }, + { STV090x_GAINLLR_NF9, 0x1E }, + { STV090x_GAINLLR_NF10, 0x1D }, + { STV090x_GAINLLR_NF11, 0x1B }, + { STV090x_GAINLLR_NF12, 0x20 }, + { STV090x_GAINLLR_NF13, 0x20 }, + { STV090x_GAINLLR_NF14, 0x20 }, + { STV090x_GAINLLR_NF15, 0x20 }, + { STV090x_GAINLLR_NF16, 0x20 }, + { STV090x_GAINLLR_NF17, 0x21 } +}; + +/* Cut 2.0 Long Frame Tracking CR loop */ +static struct stv090x_long_frame_crloop stv090x_s2_crl_cut20[] = { + /* MODCOD 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */ + { STV090x_QPSK_12, 0x1f, 0x3f, 0x1e, 0x3f, 0x3d, 0x1f, 0x3d, 0x3e, 0x3d, 0x1e }, + { STV090x_QPSK_35, 0x2f, 0x3f, 0x2e, 0x2f, 0x3d, 0x0f, 0x0e, 0x2e, 0x3d, 0x0e }, + { STV090x_QPSK_23, 0x2f, 0x3f, 0x2e, 0x2f, 0x0e, 0x0f, 0x0e, 0x1e, 0x3d, 0x3d }, + { STV090x_QPSK_34, 0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d }, + { STV090x_QPSK_45, 0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d }, + { STV090x_QPSK_56, 0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d }, + { STV090x_QPSK_89, 0x3f, 0x3f, 0x3e, 0x1f, 0x1e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d }, + { STV090x_QPSK_910, 0x3f, 0x3f, 0x3e, 0x1f, 0x1e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d }, + { STV090x_8PSK_35, 0x3c, 0x3e, 0x1c, 0x2e, 0x0c, 0x1e, 0x2b, 0x2d, 0x1b, 0x1d }, + { STV090x_8PSK_23, 0x1d, 0x3e, 0x3c, 0x2e, 0x2c, 0x1e, 0x0c, 0x2d, 0x2b, 0x1d }, + { STV090x_8PSK_34, 0x0e, 0x3e, 0x3d, 0x2e, 0x0d, 0x1e, 0x2c, 0x2d, 0x0c, 0x1d }, + { STV090x_8PSK_56, 0x2e, 0x3e, 0x1e, 0x2e, 0x2d, 0x1e, 0x3c, 0x2d, 0x2c, 0x1d }, + { STV090x_8PSK_89, 0x3e, 0x3e, 0x1e, 0x2e, 0x3d, 0x1e, 0x0d, 0x2d, 0x3c, 0x1d }, + { STV090x_8PSK_910, 0x3e, 0x3e, 0x1e, 0x2e, 0x3d, 0x1e, 0x1d, 0x2d, 0x0d, 0x1d } +}; + +/* Cut 3.0 Long Frame Tracking CR loop */ +static struct stv090x_long_frame_crloop stv090x_s2_crl_cut30[] = { + /* MODCOD 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */ + { STV090x_QPSK_12, 0x3c, 0x2c, 0x0c, 0x2c, 0x1b, 0x2c, 0x1b, 0x1c, 0x0b, 0x3b }, + { STV090x_QPSK_35, 0x0d, 0x0d, 0x0c, 0x0d, 0x1b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b }, + { STV090x_QPSK_23, 0x1d, 0x0d, 0x0c, 0x1d, 0x2b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b }, + { STV090x_QPSK_34, 0x1d, 0x1d, 0x0c, 0x1d, 0x2b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b }, + { STV090x_QPSK_45, 0x2d, 0x1d, 0x1c, 0x1d, 0x2b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b }, + { STV090x_QPSK_56, 0x2d, 0x1d, 0x1c, 0x1d, 0x2b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b }, + { STV090x_QPSK_89, 0x3d, 0x2d, 0x1c, 0x1d, 0x3b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b }, + { STV090x_QPSK_910, 0x3d, 0x2d, 0x1c, 0x1d, 0x3b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b }, + { STV090x_8PSK_35, 0x39, 0x29, 0x39, 0x19, 0x19, 0x19, 0x19, 0x19, 0x09, 0x19 }, + { STV090x_8PSK_23, 0x2a, 0x39, 0x1a, 0x0a, 0x39, 0x0a, 0x29, 0x39, 0x29, 0x0a }, + { STV090x_8PSK_34, 0x2b, 0x3a, 0x1b, 0x1b, 0x3a, 0x1b, 0x1a, 0x0b, 0x1a, 0x3a }, + { STV090x_8PSK_56, 0x0c, 0x1b, 0x3b, 0x3b, 0x1b, 0x3b, 0x3a, 0x3b, 0x3a, 0x1b }, + { STV090x_8PSK_89, 0x0d, 0x3c, 0x2c, 0x2c, 0x2b, 0x0c, 0x0b, 0x3b, 0x0b, 0x1b }, + { STV090x_8PSK_910, 0x0d, 0x0d, 0x2c, 0x3c, 0x3b, 0x1c, 0x0b, 0x3b, 0x0b, 0x1b } +}; + +/* Cut 2.0 Long Frame Tracking CR Loop */ +static struct stv090x_long_frame_crloop stv090x_s2_apsk_crl_cut20[] = { + /* MODCOD 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */ + { STV090x_16APSK_23, 0x0c, 0x0c, 0x0c, 0x0c, 0x1d, 0x0c, 0x3c, 0x0c, 0x2c, 0x0c }, + { STV090x_16APSK_34, 0x0c, 0x0c, 0x0c, 0x0c, 0x0e, 0x0c, 0x2d, 0x0c, 0x1d, 0x0c }, + { STV090x_16APSK_45, 0x0c, 0x0c, 0x0c, 0x0c, 0x1e, 0x0c, 0x3d, 0x0c, 0x2d, 0x0c }, + { STV090x_16APSK_56, 0x0c, 0x0c, 0x0c, 0x0c, 0x1e, 0x0c, 0x3d, 0x0c, 0x2d, 0x0c }, + { STV090x_16APSK_89, 0x0c, 0x0c, 0x0c, 0x0c, 0x2e, 0x0c, 0x0e, 0x0c, 0x3d, 0x0c }, + { STV090x_16APSK_910, 0x0c, 0x0c, 0x0c, 0x0c, 0x2e, 0x0c, 0x0e, 0x0c, 0x3d, 0x0c }, + { STV090x_32APSK_34, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c }, + { STV090x_32APSK_45, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c }, + { STV090x_32APSK_56, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c }, + { STV090x_32APSK_89, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c }, + { STV090x_32APSK_910, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c } +}; + +/* Cut 3.0 Long Frame Tracking CR Loop */ +static struct stv090x_long_frame_crloop stv090x_s2_apsk_crl_cut30[] = { + /* MODCOD 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */ + { STV090x_16APSK_23, 0x0a, 0x0a, 0x0a, 0x0a, 0x1a, 0x0a, 0x3a, 0x0a, 0x2a, 0x0a }, + { STV090x_16APSK_34, 0x0a, 0x0a, 0x0a, 0x0a, 0x0b, 0x0a, 0x3b, 0x0a, 0x1b, 0x0a }, + { STV090x_16APSK_45, 0x0a, 0x0a, 0x0a, 0x0a, 0x1b, 0x0a, 0x3b, 0x0a, 0x2b, 0x0a }, + { STV090x_16APSK_56, 0x0a, 0x0a, 0x0a, 0x0a, 0x1b, 0x0a, 0x3b, 0x0a, 0x2b, 0x0a }, + { STV090x_16APSK_89, 0x0a, 0x0a, 0x0a, 0x0a, 0x2b, 0x0a, 0x0c, 0x0a, 0x3b, 0x0a }, + { STV090x_16APSK_910, 0x0a, 0x0a, 0x0a, 0x0a, 0x2b, 0x0a, 0x0c, 0x0a, 0x3b, 0x0a }, + { STV090x_32APSK_34, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a }, + { STV090x_32APSK_45, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a }, + { STV090x_32APSK_56, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a }, + { STV090x_32APSK_89, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a }, + { STV090x_32APSK_910, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } +}; + +static struct stv090x_long_frame_crloop stv090x_s2_lowqpsk_crl_cut20[] = { + /* MODCOD 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */ + { STV090x_QPSK_14, 0x0f, 0x3f, 0x0e, 0x3f, 0x2d, 0x2f, 0x2d, 0x1f, 0x3d, 0x3e }, + { STV090x_QPSK_13, 0x0f, 0x3f, 0x0e, 0x3f, 0x2d, 0x2f, 0x3d, 0x0f, 0x3d, 0x2e }, + { STV090x_QPSK_25, 0x1f, 0x3f, 0x1e, 0x3f, 0x3d, 0x1f, 0x3d, 0x3e, 0x3d, 0x2e } +}; + +static struct stv090x_long_frame_crloop stv090x_s2_lowqpsk_crl_cut30[] = { + /* MODCOD 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */ + { STV090x_QPSK_14, 0x0c, 0x3c, 0x0b, 0x3c, 0x2a, 0x2c, 0x2a, 0x1c, 0x3a, 0x3b }, + { STV090x_QPSK_13, 0x0c, 0x3c, 0x0b, 0x3c, 0x2a, 0x2c, 0x3a, 0x0c, 0x3a, 0x2b }, + { STV090x_QPSK_25, 0x1c, 0x3c, 0x1b, 0x3c, 0x3a, 0x1c, 0x3a, 0x3b, 0x3a, 0x2b } +}; + +/* Cut 2.0 Short Frame Tracking CR Loop */ +static struct stv090x_short_frame_crloop stv090x_s2_short_crl_cut20[] = { + /* MODCOD 2M 5M 10M 20M 30M */ + { STV090x_QPSK, 0x2f, 0x2e, 0x0e, 0x0e, 0x3d }, + { STV090x_8PSK, 0x3e, 0x0e, 0x2d, 0x0d, 0x3c }, + { STV090x_16APSK, 0x1e, 0x1e, 0x1e, 0x3d, 0x2d }, + { STV090x_32APSK, 0x1e, 0x1e, 0x1e, 0x3d, 0x2d } +}; + +/* Cut 3.0 Short Frame Tracking CR Loop */ +static struct stv090x_short_frame_crloop stv090x_s2_short_crl_cut30[] = { + /* MODCOD 2M 5M 10M 20M 30M */ + { STV090x_QPSK, 0x2C, 0x2B, 0x0B, 0x0B, 0x3A }, + { STV090x_8PSK, 0x3B, 0x0B, 0x2A, 0x0A, 0x39 }, + { STV090x_16APSK, 0x1B, 0x1B, 0x1B, 0x3A, 0x2A }, + { STV090x_32APSK, 0x1B, 0x1B, 0x1B, 0x3A, 0x2A } +}; + +static inline s32 comp2(s32 __x, s32 __width) +{ + if (__width == 32) + return __x; + else + return (__x >= (1 << (__width - 1))) ? (__x - (1 << __width)) : __x; +} + +static int stv090x_read_reg(struct stv090x_state *state, unsigned int reg) +{ + const struct stv090x_config *config = state->config; + int ret; + + u8 b0[] = { reg >> 8, reg & 0xff }; + u8 buf; + + struct i2c_msg msg[] = { + { .addr = config->address, .flags = 0, .buf = b0, .len = 2 }, + { .addr = config->address, .flags = I2C_M_RD, .buf = &buf, .len = 1 } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + if (ret != -ERESTARTSYS) + dprintk(FE_ERROR, 1, + "Read error, Reg=[0x%02x], Status=%d", + reg, ret); + + return ret < 0 ? ret : -EREMOTEIO; + } + if (unlikely(*state->verbose >= FE_DEBUGREG)) + dprintk(FE_ERROR, 1, "Reg=[0x%02x], data=%02x", + reg, buf); + + return (unsigned int) buf; +} + +static int stv090x_write_regs(struct stv090x_state *state, unsigned int reg, u8 *data, u32 count) +{ + const struct stv090x_config *config = state->config; + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg i2c_msg = { .addr = config->address, .flags = 0, .buf = buf, .len = 2 + count }; + + if (2 + count > sizeof(buf)) { + printk(KERN_WARNING + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, count); + return -EINVAL; + } + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + memcpy(&buf[2], data, count); + + if (unlikely(*state->verbose >= FE_DEBUGREG)) { + int i; + + printk(KERN_DEBUG "%s [0x%04x]:", __func__, reg); + for (i = 0; i < count; i++) + printk(" %02x", data[i]); + printk("\n"); + } + + ret = i2c_transfer(state->i2c, &i2c_msg, 1); + if (ret != 1) { + if (ret != -ERESTARTSYS) + dprintk(FE_ERROR, 1, "Reg=[0x%04x], Data=[0x%02x ...], Count=%u, Status=%d", + reg, data[0], count, ret); + return ret < 0 ? ret : -EREMOTEIO; + } + + return 0; +} + +static int stv090x_write_reg(struct stv090x_state *state, unsigned int reg, u8 data) +{ + return stv090x_write_regs(state, reg, &data, 1); +} + +static int stv090x_i2c_gate_ctrl(struct stv090x_state *state, int enable) +{ + u32 reg; + + /* + * NOTE! A lock is used as a FSM to control the state in which + * access is serialized between two tuners on the same demod. + * This has nothing to do with a lock to protect a critical section + * which may in some other cases be confused with protecting I/O + * access to the demodulator gate. + * In case of any error, the lock is unlocked and exit within the + * relevant operations themselves. + */ + if (enable) { + if (state->config->tuner_i2c_lock) + state->config->tuner_i2c_lock(&state->frontend, 1); + else + mutex_lock(&state->internal->tuner_lock); + } + + reg = STV090x_READ_DEMOD(state, I2CRPT); + if (enable) { + dprintk(FE_DEBUG, 1, "Enable Gate"); + STV090x_SETFIELD_Px(reg, I2CT_ON_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, I2CRPT, reg) < 0) + goto err; + + } else { + dprintk(FE_DEBUG, 1, "Disable Gate"); + STV090x_SETFIELD_Px(reg, I2CT_ON_FIELD, 0); + if ((STV090x_WRITE_DEMOD(state, I2CRPT, reg)) < 0) + goto err; + } + + if (!enable) { + if (state->config->tuner_i2c_lock) + state->config->tuner_i2c_lock(&state->frontend, 0); + else + mutex_unlock(&state->internal->tuner_lock); + } + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + if (state->config->tuner_i2c_lock) + state->config->tuner_i2c_lock(&state->frontend, 0); + else + mutex_unlock(&state->internal->tuner_lock); + return -1; +} + +static void stv090x_get_lock_tmg(struct stv090x_state *state) +{ + switch (state->algo) { + case STV090x_BLIND_SEARCH: + dprintk(FE_DEBUG, 1, "Blind Search"); + if (state->srate <= 1500000) { /*10Msps< SR <=15Msps*/ + state->DemodTimeout = 1500; + state->FecTimeout = 400; + } else if (state->srate <= 5000000) { /*10Msps< SR <=15Msps*/ + state->DemodTimeout = 1000; + state->FecTimeout = 300; + } else { /*SR >20Msps*/ + state->DemodTimeout = 700; + state->FecTimeout = 100; + } + break; + + case STV090x_COLD_SEARCH: + case STV090x_WARM_SEARCH: + default: + dprintk(FE_DEBUG, 1, "Normal Search"); + if (state->srate <= 1000000) { /*SR <=1Msps*/ + state->DemodTimeout = 4500; + state->FecTimeout = 1700; + } else if (state->srate <= 2000000) { /*1Msps < SR <= 2Msps */ + state->DemodTimeout = 2500; + state->FecTimeout = 1100; + } else if (state->srate <= 5000000) { /*2Msps < SR <= 5Msps */ + state->DemodTimeout = 1000; + state->FecTimeout = 550; + } else if (state->srate <= 10000000) { /*5Msps < SR <= 10Msps */ + state->DemodTimeout = 700; + state->FecTimeout = 250; + } else if (state->srate <= 20000000) { /*10Msps < SR <= 20Msps */ + state->DemodTimeout = 400; + state->FecTimeout = 130; + } else { /*SR >20Msps*/ + state->DemodTimeout = 300; + state->FecTimeout = 100; + } + break; + } + + if (state->algo == STV090x_WARM_SEARCH) + state->DemodTimeout /= 2; +} + +static int stv090x_set_srate(struct stv090x_state *state, u32 srate) +{ + u32 sym; + + if (srate > 60000000) { + sym = (srate << 4); /* SR * 2^16 / master_clk */ + sym /= (state->internal->mclk >> 12); + } else if (srate > 6000000) { + sym = (srate << 6); + sym /= (state->internal->mclk >> 10); + } else { + sym = (srate << 9); + sym /= (state->internal->mclk >> 7); + } + + if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0x7f) < 0) /* MSB */ + goto err; + if (STV090x_WRITE_DEMOD(state, SFRINIT0, (sym & 0xff)) < 0) /* LSB */ + goto err; + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_set_max_srate(struct stv090x_state *state, u32 clk, u32 srate) +{ + u32 sym; + + srate = 105 * (srate / 100); + if (srate > 60000000) { + sym = (srate << 4); /* SR * 2^16 / master_clk */ + sym /= (state->internal->mclk >> 12); + } else if (srate > 6000000) { + sym = (srate << 6); + sym /= (state->internal->mclk >> 10); + } else { + sym = (srate << 9); + sym /= (state->internal->mclk >> 7); + } + + if (sym < 0x7fff) { + if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0) /* MSB */ + goto err; + if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0) /* LSB */ + goto err; + } else { + if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x7f) < 0) /* MSB */ + goto err; + if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xff) < 0) /* LSB */ + goto err; + } + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_set_min_srate(struct stv090x_state *state, u32 clk, u32 srate) +{ + u32 sym; + + srate = 95 * (srate / 100); + if (srate > 60000000) { + sym = (srate << 4); /* SR * 2^16 / master_clk */ + sym /= (state->internal->mclk >> 12); + } else if (srate > 6000000) { + sym = (srate << 6); + sym /= (state->internal->mclk >> 10); + } else { + sym = (srate << 9); + sym /= (state->internal->mclk >> 7); + } + + if (STV090x_WRITE_DEMOD(state, SFRLOW1, ((sym >> 8) & 0x7f)) < 0) /* MSB */ + goto err; + if (STV090x_WRITE_DEMOD(state, SFRLOW0, (sym & 0xff)) < 0) /* LSB */ + goto err; + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static u32 stv090x_car_width(u32 srate, enum stv090x_rolloff rolloff) +{ + u32 ro; + + switch (rolloff) { + case STV090x_RO_20: + ro = 20; + break; + case STV090x_RO_25: + ro = 25; + break; + case STV090x_RO_35: + default: + ro = 35; + break; + } + + return srate + (srate * ro) / 100; +} + +static int stv090x_set_vit_thacq(struct stv090x_state *state) +{ + if (STV090x_WRITE_DEMOD(state, VTH12, 0x96) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH23, 0x64) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH34, 0x36) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH56, 0x23) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH67, 0x1e) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH78, 0x19) < 0) + goto err; + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_set_vit_thtracq(struct stv090x_state *state) +{ + if (STV090x_WRITE_DEMOD(state, VTH12, 0xd0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH23, 0x7d) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH34, 0x53) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH56, 0x2f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH67, 0x24) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VTH78, 0x1f) < 0) + goto err; + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_set_viterbi(struct stv090x_state *state) +{ + switch (state->search_mode) { + case STV090x_SEARCH_AUTO: + if (STV090x_WRITE_DEMOD(state, FECM, 0x10) < 0) /* DVB-S and DVB-S2 */ + goto err; + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x3f) < 0) /* all puncture rate */ + goto err; + break; + case STV090x_SEARCH_DVBS1: + if (STV090x_WRITE_DEMOD(state, FECM, 0x00) < 0) /* disable DSS */ + goto err; + switch (state->fec) { + case STV090x_PR12: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x01) < 0) + goto err; + break; + + case STV090x_PR23: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x02) < 0) + goto err; + break; + + case STV090x_PR34: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x04) < 0) + goto err; + break; + + case STV090x_PR56: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x08) < 0) + goto err; + break; + + case STV090x_PR78: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x20) < 0) + goto err; + break; + + default: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x2f) < 0) /* all */ + goto err; + break; + } + break; + case STV090x_SEARCH_DSS: + if (STV090x_WRITE_DEMOD(state, FECM, 0x80) < 0) + goto err; + switch (state->fec) { + case STV090x_PR12: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x01) < 0) + goto err; + break; + + case STV090x_PR23: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x02) < 0) + goto err; + break; + + case STV090x_PR67: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x10) < 0) + goto err; + break; + + default: + if (STV090x_WRITE_DEMOD(state, PRVIT, 0x13) < 0) /* 1/2, 2/3, 6/7 */ + goto err; + break; + } + break; + default: + break; + } + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_stop_modcod(struct stv090x_state *state) +{ + if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xff) < 0) + goto err; + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_activate_modcod(struct stv090x_state *state) +{ + if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xfc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xcf) < 0) + goto err; + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_activate_modcod_single(struct stv090x_state *state) +{ + + if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xf0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0x0f) < 0) + goto err; + + return 0; + +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_vitclk_ctl(struct stv090x_state *state, int enable) +{ + u32 reg; + + switch (state->demod) { + case STV090x_DEMODULATOR_0: + mutex_lock(&state->internal->demod_lock); + reg = stv090x_read_reg(state, STV090x_STOPCLK2); + STV090x_SETFIELD(reg, STOP_CLKVIT1_FIELD, enable); + if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0) + goto err; + mutex_unlock(&state->internal->demod_lock); + break; + + case STV090x_DEMODULATOR_1: + mutex_lock(&state->internal->demod_lock); + reg = stv090x_read_reg(state, STV090x_STOPCLK2); + STV090x_SETFIELD(reg, STOP_CLKVIT2_FIELD, enable); + if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0) + goto err; + mutex_unlock(&state->internal->demod_lock); + break; + + default: + dprintk(FE_ERROR, 1, "Wrong demodulator!"); + break; + } + return 0; +err: + mutex_unlock(&state->internal->demod_lock); + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_dvbs_track_crl(struct stv090x_state *state) +{ + if (state->internal->dev_ver >= 0x30) { + /* Set ACLC BCLC optimised value vs SR */ + if (state->srate >= 15000000) { + if (STV090x_WRITE_DEMOD(state, ACLC, 0x2b) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, BCLC, 0x1a) < 0) + goto err; + } else if ((state->srate >= 7000000) && (15000000 > state->srate)) { + if (STV090x_WRITE_DEMOD(state, ACLC, 0x0c) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, BCLC, 0x1b) < 0) + goto err; + } else if (state->srate < 7000000) { + if (STV090x_WRITE_DEMOD(state, ACLC, 0x2c) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, BCLC, 0x1c) < 0) + goto err; + } + + } else { + /* Cut 2.0 */ + if (STV090x_WRITE_DEMOD(state, ACLC, 0x1a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, BCLC, 0x09) < 0) + goto err; + } + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_delivery_search(struct stv090x_state *state) +{ + u32 reg; + + switch (state->search_mode) { + case STV090x_SEARCH_DVBS1: + case STV090x_SEARCH_DSS: + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1); + STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + + /* Activate Viterbi decoder in legacy search, + * do not use FRESVIT1, might impact VITERBI2 + */ + if (stv090x_vitclk_ctl(state, 0) < 0) + goto err; + + if (stv090x_dvbs_track_crl(state) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x22) < 0) /* disable DVB-S2 */ + goto err; + + if (stv090x_set_vit_thacq(state) < 0) + goto err; + if (stv090x_set_viterbi(state) < 0) + goto err; + break; + + case STV090x_SEARCH_DVBS2: + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0); + STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1); + STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + + if (stv090x_vitclk_ctl(state, 1) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, ACLC, 0x1a) < 0) /* stop DVB-S CR loop */ + goto err; + if (STV090x_WRITE_DEMOD(state, BCLC, 0x09) < 0) + goto err; + + if (state->internal->dev_ver <= 0x20) { + /* enable S2 carrier loop */ + if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x26) < 0) + goto err; + } else { + /* > Cut 3: Stop carrier 3 */ + if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x66) < 0) + goto err; + } + + if (state->demod_mode != STV090x_SINGLE) { + /* Cut 2: enable link during search */ + if (stv090x_activate_modcod(state) < 0) + goto err; + } else { + /* Single demodulator + * Authorize SHORT and LONG frames, + * QPSK, 8PSK, 16APSK and 32APSK + */ + if (stv090x_activate_modcod_single(state) < 0) + goto err; + } + + if (stv090x_set_vit_thtracq(state) < 0) + goto err; + break; + + case STV090x_SEARCH_AUTO: + default: + /* enable DVB-S2 and DVB-S2 in Auto MODE */ + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0); + STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1); + STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + + if (stv090x_vitclk_ctl(state, 0) < 0) + goto err; + + if (stv090x_dvbs_track_crl(state) < 0) + goto err; + + if (state->internal->dev_ver <= 0x20) { + /* enable S2 carrier loop */ + if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x26) < 0) + goto err; + } else { + /* > Cut 3: Stop carrier 3 */ + if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x66) < 0) + goto err; + } + + if (state->demod_mode != STV090x_SINGLE) { + /* Cut 2: enable link during search */ + if (stv090x_activate_modcod(state) < 0) + goto err; + } else { + /* Single demodulator + * Authorize SHORT and LONG frames, + * QPSK, 8PSK, 16APSK and 32APSK + */ + if (stv090x_activate_modcod_single(state) < 0) + goto err; + } + + if (stv090x_set_vit_thacq(state) < 0) + goto err; + + if (stv090x_set_viterbi(state) < 0) + goto err; + break; + } + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_start_search(struct stv090x_state *state) +{ + u32 reg, freq_abs; + s16 freq; + + /* Reset demodulator */ + reg = STV090x_READ_DEMOD(state, DMDISTATE); + STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x1f); + if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0) + goto err; + + if (state->internal->dev_ver <= 0x20) { + if (state->srate <= 5000000) { + if (STV090x_WRITE_DEMOD(state, CARCFG, 0x44) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRUP1, 0x0f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRUP0, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRLOW1, 0xf0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRLOW0, 0x00) < 0) + goto err; + + /*enlarge the timing bandwidth for Low SR*/ + if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0) + goto err; + } else { + /* If the symbol rate is >5 Msps + Set The carrier search up and low to auto mode */ + if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0) + goto err; + /*reduce the timing bandwidth for high SR*/ + if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0) + goto err; + } + } else { + /* >= Cut 3 */ + if (state->srate <= 5000000) { + /* enlarge the timing bandwidth for Low SR */ + STV090x_WRITE_DEMOD(state, RTCS2, 0x68); + } else { + /* reduce timing bandwidth for high SR */ + STV090x_WRITE_DEMOD(state, RTCS2, 0x44); + } + + /* Set CFR min and max to manual mode */ + STV090x_WRITE_DEMOD(state, CARCFG, 0x46); + + if (state->algo == STV090x_WARM_SEARCH) { + /* WARM Start + * CFR min = -1MHz, + * CFR max = +1MHz + */ + freq_abs = 1000 << 16; + freq_abs /= (state->internal->mclk / 1000); + freq = (s16) freq_abs; + } else { + /* COLD Start + * CFR min =- (SearchRange / 2 + 600KHz) + * CFR max = +(SearchRange / 2 + 600KHz) + * (600KHz for the tuner step size) + */ + freq_abs = (state->search_range / 2000) + 600; + freq_abs = freq_abs << 16; + freq_abs /= (state->internal->mclk / 1000); + freq = (s16) freq_abs; + } + + if (STV090x_WRITE_DEMOD(state, CFRUP1, MSB(freq)) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRUP0, LSB(freq)) < 0) + goto err; + + freq *= -1; + + if (STV090x_WRITE_DEMOD(state, CFRLOW1, MSB(freq)) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRLOW0, LSB(freq)) < 0) + goto err; + + } + + if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0) < 0) + goto err; + + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, EQUALCFG, 0x41) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0) + goto err; + + if ((state->search_mode == STV090x_SEARCH_DVBS1) || + (state->search_mode == STV090x_SEARCH_DSS) || + (state->search_mode == STV090x_SEARCH_AUTO)) { + + if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x82) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x00) < 0) + goto err; + } + } + + if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0xe0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0xc0) < 0) + goto err; + + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0); + STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + reg = STV090x_READ_DEMOD(state, DMDCFG2); + STV090x_SETFIELD_Px(reg, S1S2_SEQUENTIAL_FIELD, 0x0); + if (STV090x_WRITE_DEMOD(state, DMDCFG2, reg) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, RTC, 0x88) < 0) + goto err; + + if (state->internal->dev_ver >= 0x20) { + /*Frequency offset detector setting*/ + if (state->srate < 2000000) { + if (state->internal->dev_ver <= 0x20) { + /* Cut 2 */ + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x39) < 0) + goto err; + } else { + /* Cut 3 */ + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x89) < 0) + goto err; + } + if (STV090x_WRITE_DEMOD(state, CARHDR, 0x40) < 0) + goto err; + } else if (state->srate < 10000000) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4c) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CARHDR, 0x20) < 0) + goto err; + } else { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4b) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CARHDR, 0x20) < 0) + goto err; + } + } else { + if (state->srate < 10000000) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0xef) < 0) + goto err; + } else { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0xed) < 0) + goto err; + } + } + + switch (state->algo) { + case STV090x_WARM_SEARCH: + /* The symbol rate and the exact + * carrier Frequency are known + */ + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0) + goto err; + break; + + case STV090x_COLD_SEARCH: + /* The symbol rate is known */ + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0) + goto err; + break; + + default: + break; + } + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_get_agc2_min_level(struct stv090x_state *state) +{ + u32 agc2_min = 0xffff, agc2 = 0, freq_init, freq_step, reg; + s32 i, j, steps, dir; + + if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0) + goto err; + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0); + STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x83) < 0) /* SR = 65 Msps Max */ + goto err; + if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xc0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x82) < 0) /* SR= 400 ksps Min */ + goto err; + if (STV090x_WRITE_DEMOD(state, SFRLOW0, 0xa0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x00) < 0) /* stop acq @ coarse carrier state */ + goto err; + if (stv090x_set_srate(state, 1000000) < 0) + goto err; + + steps = state->search_range / 1000000; + if (steps <= 0) + steps = 1; + + dir = 1; + freq_step = (1000000 * 256) / (state->internal->mclk / 256); + freq_init = 0; + + for (i = 0; i < steps; i++) { + if (dir > 0) + freq_init = freq_init + (freq_step * i); + else + freq_init = freq_init - (freq_step * i); + + dir *= -1; + + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Demod RESET */ + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT1, (freq_init >> 8) & 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, freq_init & 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x58) < 0) /* Demod RESET */ + goto err; + msleep(10); + + agc2 = 0; + for (j = 0; j < 10; j++) { + agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) | + STV090x_READ_DEMOD(state, AGC2I0); + } + agc2 /= 10; + if (agc2 < agc2_min) + agc2_min = agc2; + } + + return agc2_min; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static u32 stv090x_get_srate(struct stv090x_state *state, u32 clk) +{ + u8 r3, r2, r1, r0; + s32 srate, int_1, int_2, tmp_1, tmp_2; + + r3 = STV090x_READ_DEMOD(state, SFR3); + r2 = STV090x_READ_DEMOD(state, SFR2); + r1 = STV090x_READ_DEMOD(state, SFR1); + r0 = STV090x_READ_DEMOD(state, SFR0); + + srate = ((r3 << 24) | (r2 << 16) | (r1 << 8) | r0); + + int_1 = clk >> 16; + int_2 = srate >> 16; + + tmp_1 = clk % 0x10000; + tmp_2 = srate % 0x10000; + + srate = (int_1 * int_2) + + ((int_1 * tmp_2) >> 16) + + ((int_2 * tmp_1) >> 16); + + return srate; +} + +static u32 stv090x_srate_srch_coarse(struct stv090x_state *state) +{ + struct dvb_frontend *fe = &state->frontend; + + int tmg_lock = 0, i; + s32 tmg_cpt = 0, dir = 1, steps, cur_step = 0, freq; + u32 srate_coarse = 0, agc2 = 0, car_step = 1200, reg; + u32 agc2th; + + if (state->internal->dev_ver >= 0x30) + agc2th = 0x2e00; + else + agc2th = 0x1f00; + + reg = STV090x_READ_DEMOD(state, DMDISTATE); + STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x1f); /* Demod RESET */ + if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGCFG, 0x12) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0xf0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0xe0) < 0) + goto err; + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 1); + STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x83) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xc0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x82) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRLOW0, 0xa0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x50) < 0) + goto err; + + if (state->internal->dev_ver >= 0x30) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x99) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x98) < 0) + goto err; + + } else if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x6a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x95) < 0) + goto err; + } + + if (state->srate <= 2000000) + car_step = 1000; + else if (state->srate <= 5000000) + car_step = 2000; + else if (state->srate <= 12000000) + car_step = 3000; + else + car_step = 5000; + + steps = -1 + ((state->search_range / 1000) / car_step); + steps /= 2; + steps = (2 * steps) + 1; + if (steps < 0) + steps = 1; + else if (steps > 10) { + steps = 11; + car_step = (state->search_range / 1000) / 10; + } + cur_step = 0; + dir = 1; + freq = state->frequency; + + while ((!tmg_lock) && (cur_step < steps)) { + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5f) < 0) /* Demod RESET */ + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRINIT1, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRINIT0, 0x00) < 0) + goto err; + /* trigger acquisition */ + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x40) < 0) + goto err; + msleep(50); + for (i = 0; i < 10; i++) { + reg = STV090x_READ_DEMOD(state, DSTATUS); + if (STV090x_GETFIELD_Px(reg, TMGLOCK_QUALITY_FIELD) >= 2) + tmg_cpt++; + agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) | + STV090x_READ_DEMOD(state, AGC2I0); + } + agc2 /= 10; + srate_coarse = stv090x_get_srate(state, state->internal->mclk); + cur_step++; + dir *= -1; + if ((tmg_cpt >= 5) && (agc2 < agc2th) && + (srate_coarse < 50000000) && (srate_coarse > 850000)) + tmg_lock = 1; + else if (cur_step < steps) { + if (dir > 0) + freq += cur_step * car_step; + else + freq -= cur_step * car_step; + + /* Setup tuner */ + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_set_frequency) { + if (state->config->tuner_set_frequency(fe, freq) < 0) + goto err_gateoff; + } + + if (state->config->tuner_set_bandwidth) { + if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + msleep(50); + + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_get_status) { + if (state->config->tuner_get_status(fe, ®) < 0) + goto err_gateoff; + } + + if (reg) + dprintk(FE_DEBUG, 1, "Tuner phase locked"); + else + dprintk(FE_DEBUG, 1, "Tuner unlocked"); + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + } + } + if (!tmg_lock) + srate_coarse = 0; + else + srate_coarse = stv090x_get_srate(state, state->internal->mclk); + + return srate_coarse; + +err_gateoff: + stv090x_i2c_gate_ctrl(state, 0); +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static u32 stv090x_srate_srch_fine(struct stv090x_state *state) +{ + u32 srate_coarse, freq_coarse, sym, reg; + + srate_coarse = stv090x_get_srate(state, state->internal->mclk); + freq_coarse = STV090x_READ_DEMOD(state, CFR2) << 8; + freq_coarse |= STV090x_READ_DEMOD(state, CFR1); + sym = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */ + + if (sym < state->srate) + srate_coarse = 0; + else { + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) /* Demod RESET */ + goto err; + if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0x20) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGCFG, 0xd2) < 0) + goto err; + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0) + goto err; + + if (state->internal->dev_ver >= 0x30) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x79) < 0) + goto err; + } else if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0) + goto err; + } + + if (srate_coarse > 3000000) { + sym = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */ + sym = (sym / 1000) * 65536; + sym /= (state->internal->mclk / 1000); + if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0) + goto err; + sym = 10 * (srate_coarse / 13); /* SFRLOW = SFR - 30% */ + sym = (sym / 1000) * 65536; + sym /= (state->internal->mclk / 1000); + if (STV090x_WRITE_DEMOD(state, SFRLOW1, (sym >> 8) & 0x7f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRLOW0, sym & 0xff) < 0) + goto err; + sym = (srate_coarse / 1000) * 65536; + sym /= (state->internal->mclk / 1000); + if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRINIT0, sym & 0xff) < 0) + goto err; + } else { + sym = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */ + sym = (sym / 100) * 65536; + sym /= (state->internal->mclk / 100); + if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0) + goto err; + sym = 10 * (srate_coarse / 14); /* SFRLOW = SFR - 30% */ + sym = (sym / 100) * 65536; + sym /= (state->internal->mclk / 100); + if (STV090x_WRITE_DEMOD(state, SFRLOW1, (sym >> 8) & 0x7f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRLOW0, sym & 0xff) < 0) + goto err; + sym = (srate_coarse / 100) * 65536; + sym /= (state->internal->mclk / 100); + if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, SFRINIT0, sym & 0xff) < 0) + goto err; + } + if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x20) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT1, (freq_coarse >> 8) & 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, freq_coarse & 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0) /* trigger acquisition */ + goto err; + } + + return srate_coarse; + +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_get_dmdlock(struct stv090x_state *state, s32 timeout) +{ + s32 timer = 0, lock = 0; + u32 reg; + u8 stat; + + while ((timer < timeout) && (!lock)) { + reg = STV090x_READ_DEMOD(state, DMDSTATE); + stat = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD); + + switch (stat) { + case 0: /* searching */ + case 1: /* first PLH detected */ + default: + dprintk(FE_DEBUG, 1, "Demodulator searching .."); + lock = 0; + break; + case 2: /* DVB-S2 mode */ + case 3: /* DVB-S1/legacy mode */ + reg = STV090x_READ_DEMOD(state, DSTATUS); + lock = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD); + break; + } + + if (!lock) + msleep(10); + else + dprintk(FE_DEBUG, 1, "Demodulator acquired LOCK"); + + timer += 10; + } + return lock; +} + +static int stv090x_blind_search(struct stv090x_state *state) +{ + u32 agc2, reg, srate_coarse; + s32 cpt_fail, agc2_ovflw, i; + u8 k_ref, k_max, k_min; + int coarse_fail = 0; + int lock; + + k_max = 110; + k_min = 10; + + agc2 = stv090x_get_agc2_min_level(state); + + if (agc2 > STV090x_SEARCH_AGC2_TH(state->internal->dev_ver)) { + lock = 0; + } else { + + if (state->internal->dev_ver <= 0x20) { + if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0) + goto err; + } else { + /* > Cut 3 */ + if (STV090x_WRITE_DEMOD(state, CARCFG, 0x06) < 0) + goto err; + } + + if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0) + goto err; + + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, EQUALCFG, 0x41) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x82) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x00) < 0) /* set viterbi hysteresis */ + goto err; + } + + k_ref = k_max; + do { + if (STV090x_WRITE_DEMOD(state, KREFTMG, k_ref) < 0) + goto err; + if (stv090x_srate_srch_coarse(state) != 0) { + srate_coarse = stv090x_srate_srch_fine(state); + if (srate_coarse != 0) { + stv090x_get_lock_tmg(state); + lock = stv090x_get_dmdlock(state, + state->DemodTimeout); + } else { + lock = 0; + } + } else { + cpt_fail = 0; + agc2_ovflw = 0; + for (i = 0; i < 10; i++) { + agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) | + STV090x_READ_DEMOD(state, AGC2I0); + if (agc2 >= 0xff00) + agc2_ovflw++; + reg = STV090x_READ_DEMOD(state, DSTATUS2); + if ((STV090x_GETFIELD_Px(reg, CFR_OVERFLOW_FIELD) == 0x01) && + (STV090x_GETFIELD_Px(reg, DEMOD_DELOCK_FIELD) == 0x01)) + + cpt_fail++; + } + if ((cpt_fail > 7) || (agc2_ovflw > 7)) + coarse_fail = 1; + + lock = 0; + } + k_ref -= 20; + } while ((k_ref >= k_min) && (!lock) && (!coarse_fail)); + } + + return lock; + +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_chk_tmg(struct stv090x_state *state) +{ + u32 reg; + s32 tmg_cpt = 0, i; + u8 freq, tmg_thh, tmg_thl; + int tmg_lock = 0; + + freq = STV090x_READ_DEMOD(state, CARFREQ); + tmg_thh = STV090x_READ_DEMOD(state, TMGTHRISE); + tmg_thl = STV090x_READ_DEMOD(state, TMGTHFALL); + if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0x20) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0x00) < 0) + goto err; + + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00); /* stop carrier offset search */ + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, RTC, 0x80) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, RTCS2, 0x40) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x00) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0) /* set car ofset to 0 */ + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x65) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0) /* trigger acquisition */ + goto err; + msleep(10); + + for (i = 0; i < 10; i++) { + reg = STV090x_READ_DEMOD(state, DSTATUS); + if (STV090x_GETFIELD_Px(reg, TMGLOCK_QUALITY_FIELD) >= 2) + tmg_cpt++; + msleep(1); + } + if (tmg_cpt >= 3) + tmg_lock = 1; + + if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, RTC, 0x88) < 0) /* DVB-S1 timing */ + goto err; + if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0) /* DVB-S2 timing */ + goto err; + + if (STV090x_WRITE_DEMOD(state, CARFREQ, freq) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHRISE, tmg_thh) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGTHFALL, tmg_thl) < 0) + goto err; + + return tmg_lock; + +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd) +{ + struct dvb_frontend *fe = &state->frontend; + + u32 reg; + s32 car_step, steps, cur_step, dir, freq, timeout_lock; + int lock = 0; + + if (state->srate >= 10000000) + timeout_lock = timeout_dmd / 3; + else + timeout_lock = timeout_dmd / 2; + + lock = stv090x_get_dmdlock(state, timeout_lock); /* cold start wait */ + if (!lock) { + if (state->srate >= 10000000) { + if (stv090x_chk_tmg(state)) { + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0) + goto err; + lock = stv090x_get_dmdlock(state, timeout_dmd); + } else { + lock = 0; + } + } else { + if (state->srate <= 4000000) + car_step = 1000; + else if (state->srate <= 7000000) + car_step = 2000; + else if (state->srate <= 10000000) + car_step = 3000; + else + car_step = 5000; + + steps = (state->search_range / 1000) / car_step; + steps /= 2; + steps = 2 * (steps + 1); + if (steps < 0) + steps = 2; + else if (steps > 12) + steps = 12; + + cur_step = 1; + dir = 1; + + if (!lock) { + freq = state->frequency; + state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate; + while ((cur_step <= steps) && (!lock)) { + if (dir > 0) + freq += cur_step * car_step; + else + freq -= cur_step * car_step; + + /* Setup tuner */ + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_set_frequency) { + if (state->config->tuner_set_frequency(fe, freq) < 0) + goto err_gateoff; + } + + if (state->config->tuner_set_bandwidth) { + if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + msleep(50); + + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_get_status) { + if (state->config->tuner_get_status(fe, ®) < 0) + goto err_gateoff; + } + + if (reg) + dprintk(FE_DEBUG, 1, "Tuner phase locked"); + else + dprintk(FE_DEBUG, 1, "Tuner unlocked"); + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c); + if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0) + goto err; + lock = stv090x_get_dmdlock(state, (timeout_dmd / 3)); + + dir *= -1; + cur_step++; + } + } + } + } + + return lock; + +err_gateoff: + stv090x_i2c_gate_ctrl(state, 0); +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_get_loop_params(struct stv090x_state *state, s32 *freq_inc, s32 *timeout_sw, s32 *steps) +{ + s32 timeout, inc, steps_max, srate, car_max; + + srate = state->srate; + car_max = state->search_range / 1000; + car_max += car_max / 10; + car_max = 65536 * (car_max / 2); + car_max /= (state->internal->mclk / 1000); + + if (car_max > 0x4000) + car_max = 0x4000 ; /* maxcarrier should be<= +-1/4 Mclk */ + + inc = srate; + inc /= state->internal->mclk / 1000; + inc *= 256; + inc *= 256; + inc /= 1000; + + switch (state->search_mode) { + case STV090x_SEARCH_DVBS1: + case STV090x_SEARCH_DSS: + inc *= 3; /* freq step = 3% of srate */ + timeout = 20; + break; + + case STV090x_SEARCH_DVBS2: + inc *= 4; + timeout = 25; + break; + + case STV090x_SEARCH_AUTO: + default: + inc *= 3; + timeout = 25; + break; + } + inc /= 100; + if ((inc > car_max) || (inc < 0)) + inc = car_max / 2; /* increment <= 1/8 Mclk */ + + timeout *= 27500; /* 27.5 Msps reference */ + if (srate > 0) + timeout /= (srate / 1000); + + if ((timeout > 100) || (timeout < 0)) + timeout = 100; + + steps_max = (car_max / inc) + 1; /* min steps = 3 */ + if ((steps_max > 100) || (steps_max < 0)) { + steps_max = 100; /* max steps <= 100 */ + inc = car_max / steps_max; + } + *freq_inc = inc; + *timeout_sw = timeout; + *steps = steps_max; + + return 0; +} + +static int stv090x_chk_signal(struct stv090x_state *state) +{ + s32 offst_car, agc2, car_max; + int no_signal; + + offst_car = STV090x_READ_DEMOD(state, CFR2) << 8; + offst_car |= STV090x_READ_DEMOD(state, CFR1); + offst_car = comp2(offst_car, 16); + + agc2 = STV090x_READ_DEMOD(state, AGC2I1) << 8; + agc2 |= STV090x_READ_DEMOD(state, AGC2I0); + car_max = state->search_range / 1000; + + car_max += (car_max / 10); /* 10% margin */ + car_max = (65536 * car_max / 2); + car_max /= state->internal->mclk / 1000; + + if (car_max > 0x4000) + car_max = 0x4000; + + if ((agc2 > 0x2000) || (offst_car > 2 * car_max) || (offst_car < -2 * car_max)) { + no_signal = 1; + dprintk(FE_DEBUG, 1, "No Signal"); + } else { + no_signal = 0; + dprintk(FE_DEBUG, 1, "Found Signal"); + } + + return no_signal; +} + +static int stv090x_search_car_loop(struct stv090x_state *state, s32 inc, s32 timeout, int zigzag, s32 steps_max) +{ + int no_signal, lock = 0; + s32 cpt_step = 0, offst_freq, car_max; + u32 reg; + + car_max = state->search_range / 1000; + car_max += (car_max / 10); + car_max = (65536 * car_max / 2); + car_max /= (state->internal->mclk / 1000); + if (car_max > 0x4000) + car_max = 0x4000; + + if (zigzag) + offst_freq = 0; + else + offst_freq = -car_max + inc; + + do { + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT1, ((offst_freq / 256) & 0xff)) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, offst_freq & 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0) + goto err; + + reg = STV090x_READ_DEMOD(state, PDELCTRL1); + STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x1); /* stop DVB-S2 packet delin */ + if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0) + goto err; + + if (zigzag) { + if (offst_freq >= 0) + offst_freq = -offst_freq - 2 * inc; + else + offst_freq = -offst_freq; + } else { + offst_freq += 2 * inc; + } + + cpt_step++; + + lock = stv090x_get_dmdlock(state, timeout); + no_signal = stv090x_chk_signal(state); + + } while ((!lock) && + (!no_signal) && + ((offst_freq - inc) < car_max) && + ((offst_freq + inc) > -car_max) && + (cpt_step < steps_max)); + + reg = STV090x_READ_DEMOD(state, PDELCTRL1); + STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0) + goto err; + + return lock; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_sw_algo(struct stv090x_state *state) +{ + int no_signal, zigzag, lock = 0; + u32 reg; + + s32 dvbs2_fly_wheel; + s32 inc, timeout_step, trials, steps_max; + + /* get params */ + stv090x_get_loop_params(state, &inc, &timeout_step, &steps_max); + + switch (state->search_mode) { + case STV090x_SEARCH_DVBS1: + case STV090x_SEARCH_DSS: + /* accelerate the frequency detector */ + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x3B) < 0) + goto err; + } + + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x49) < 0) + goto err; + zigzag = 0; + break; + + case STV090x_SEARCH_DVBS2: + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0) + goto err; + } + + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x89) < 0) + goto err; + zigzag = 1; + break; + + case STV090x_SEARCH_AUTO: + default: + /* accelerate the frequency detector */ + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x3b) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0) + goto err; + } + + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0xc9) < 0) + goto err; + zigzag = 0; + break; + } + + trials = 0; + do { + lock = stv090x_search_car_loop(state, inc, timeout_step, zigzag, steps_max); + no_signal = stv090x_chk_signal(state); + trials++; + + /*run the SW search 2 times maximum*/ + if (lock || no_signal || (trials == 2)) { + /*Check if the demod is not losing lock in DVBS2*/ + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0) + goto err; + } + + reg = STV090x_READ_DEMOD(state, DMDSTATE); + if ((lock) && (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == STV090x_DVBS2)) { + /*Check if the demod is not losing lock in DVBS2*/ + msleep(timeout_step); + reg = STV090x_READ_DEMOD(state, DMDFLYW); + dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD); + if (dvbs2_fly_wheel < 0xd) { /*if correct frames is decrementing */ + msleep(timeout_step); + reg = STV090x_READ_DEMOD(state, DMDFLYW); + dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD); + } + if (dvbs2_fly_wheel < 0xd) { + /*FALSE lock, The demod is losing lock */ + lock = 0; + if (trials < 2) { + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0) + goto err; + } + + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x89) < 0) + goto err; + } + } + } + } + } while ((!lock) && (trials < 2) && (!no_signal)); + + return lock; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static enum stv090x_delsys stv090x_get_std(struct stv090x_state *state) +{ + u32 reg; + enum stv090x_delsys delsys; + + reg = STV090x_READ_DEMOD(state, DMDSTATE); + if (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == 2) + delsys = STV090x_DVBS2; + else if (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == 3) { + reg = STV090x_READ_DEMOD(state, FECM); + if (STV090x_GETFIELD_Px(reg, DSS_DVB_FIELD) == 1) + delsys = STV090x_DSS; + else + delsys = STV090x_DVBS1; + } else { + delsys = STV090x_ERROR; + } + + return delsys; +} + +/* in Hz */ +static s32 stv090x_get_car_freq(struct stv090x_state *state, u32 mclk) +{ + s32 derot, int_1, int_2, tmp_1, tmp_2; + + derot = STV090x_READ_DEMOD(state, CFR2) << 16; + derot |= STV090x_READ_DEMOD(state, CFR1) << 8; + derot |= STV090x_READ_DEMOD(state, CFR0); + + derot = comp2(derot, 24); + int_1 = mclk >> 12; + int_2 = derot >> 12; + + /* carrier_frequency = MasterClock * Reg / 2^24 */ + tmp_1 = mclk % 0x1000; + tmp_2 = derot % 0x1000; + + derot = (int_1 * int_2) + + ((int_1 * tmp_2) >> 12) + + ((int_2 * tmp_1) >> 12); + + return derot; +} + +static int stv090x_get_viterbi(struct stv090x_state *state) +{ + u32 reg, rate; + + reg = STV090x_READ_DEMOD(state, VITCURPUN); + rate = STV090x_GETFIELD_Px(reg, VIT_CURPUN_FIELD); + + switch (rate) { + case 13: + state->fec = STV090x_PR12; + break; + + case 18: + state->fec = STV090x_PR23; + break; + + case 21: + state->fec = STV090x_PR34; + break; + + case 24: + state->fec = STV090x_PR56; + break; + + case 25: + state->fec = STV090x_PR67; + break; + + case 26: + state->fec = STV090x_PR78; + break; + + default: + state->fec = STV090x_PRERR; + break; + } + + return 0; +} + +static enum stv090x_signal_state stv090x_get_sig_params(struct stv090x_state *state) +{ + struct dvb_frontend *fe = &state->frontend; + + u8 tmg; + u32 reg; + s32 i = 0, offst_freq; + + msleep(5); + + if (state->algo == STV090x_BLIND_SEARCH) { + tmg = STV090x_READ_DEMOD(state, TMGREG2); + STV090x_WRITE_DEMOD(state, SFRSTEP, 0x5c); + while ((i <= 50) && (tmg != 0) && (tmg != 0xff)) { + tmg = STV090x_READ_DEMOD(state, TMGREG2); + msleep(5); + i += 5; + } + } + state->delsys = stv090x_get_std(state); + + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_get_frequency) { + if (state->config->tuner_get_frequency(fe, &state->frequency) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + offst_freq = stv090x_get_car_freq(state, state->internal->mclk) / 1000; + state->frequency += offst_freq; + + if (stv090x_get_viterbi(state) < 0) + goto err; + + reg = STV090x_READ_DEMOD(state, DMDMODCOD); + state->modcod = STV090x_GETFIELD_Px(reg, DEMOD_MODCOD_FIELD); + state->pilots = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) & 0x01; + state->frame_len = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) >> 1; + reg = STV090x_READ_DEMOD(state, TMGOBS); + state->rolloff = STV090x_GETFIELD_Px(reg, ROLLOFF_STATUS_FIELD); + reg = STV090x_READ_DEMOD(state, FECM); + state->inversion = STV090x_GETFIELD_Px(reg, IQINV_FIELD); + + if ((state->algo == STV090x_BLIND_SEARCH) || (state->srate < 10000000)) { + + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_get_frequency) { + if (state->config->tuner_get_frequency(fe, &state->frequency) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + if (abs(offst_freq) <= ((state->search_range / 2000) + 500)) + return STV090x_RANGEOK; + else if (abs(offst_freq) <= (stv090x_car_width(state->srate, state->rolloff) / 2000)) + return STV090x_RANGEOK; + else + return STV090x_OUTOFRANGE; /* Out of Range */ + } else { + if (abs(offst_freq) <= ((state->search_range / 2000) + 500)) + return STV090x_RANGEOK; + else + return STV090x_OUTOFRANGE; + } + + return STV090x_OUTOFRANGE; + +err_gateoff: + stv090x_i2c_gate_ctrl(state, 0); +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static u32 stv090x_get_tmgoffst(struct stv090x_state *state, u32 srate) +{ + s32 offst_tmg; + + offst_tmg = STV090x_READ_DEMOD(state, TMGREG2) << 16; + offst_tmg |= STV090x_READ_DEMOD(state, TMGREG1) << 8; + offst_tmg |= STV090x_READ_DEMOD(state, TMGREG0); + + offst_tmg = comp2(offst_tmg, 24); /* 2's complement */ + if (!offst_tmg) + offst_tmg = 1; + + offst_tmg = ((s32) srate * 10) / ((s32) 0x1000000 / offst_tmg); + offst_tmg /= 320; + + return offst_tmg; +} + +static u8 stv090x_optimize_carloop(struct stv090x_state *state, enum stv090x_modcod modcod, s32 pilots) +{ + u8 aclc = 0x29; + s32 i; + struct stv090x_long_frame_crloop *car_loop, *car_loop_qpsk_low, *car_loop_apsk_low; + + if (state->internal->dev_ver == 0x20) { + car_loop = stv090x_s2_crl_cut20; + car_loop_qpsk_low = stv090x_s2_lowqpsk_crl_cut20; + car_loop_apsk_low = stv090x_s2_apsk_crl_cut20; + } else { + /* >= Cut 3 */ + car_loop = stv090x_s2_crl_cut30; + car_loop_qpsk_low = stv090x_s2_lowqpsk_crl_cut30; + car_loop_apsk_low = stv090x_s2_apsk_crl_cut30; + } + + if (modcod < STV090x_QPSK_12) { + i = 0; + while ((i < 3) && (modcod != car_loop_qpsk_low[i].modcod)) + i++; + + if (i >= 3) + i = 2; + + } else { + i = 0; + while ((i < 14) && (modcod != car_loop[i].modcod)) + i++; + + if (i >= 14) { + i = 0; + while ((i < 11) && (modcod != car_loop_apsk_low[i].modcod)) + i++; + + if (i >= 11) + i = 10; + } + } + + if (modcod <= STV090x_QPSK_25) { + if (pilots) { + if (state->srate <= 3000000) + aclc = car_loop_qpsk_low[i].crl_pilots_on_2; + else if (state->srate <= 7000000) + aclc = car_loop_qpsk_low[i].crl_pilots_on_5; + else if (state->srate <= 15000000) + aclc = car_loop_qpsk_low[i].crl_pilots_on_10; + else if (state->srate <= 25000000) + aclc = car_loop_qpsk_low[i].crl_pilots_on_20; + else + aclc = car_loop_qpsk_low[i].crl_pilots_on_30; + } else { + if (state->srate <= 3000000) + aclc = car_loop_qpsk_low[i].crl_pilots_off_2; + else if (state->srate <= 7000000) + aclc = car_loop_qpsk_low[i].crl_pilots_off_5; + else if (state->srate <= 15000000) + aclc = car_loop_qpsk_low[i].crl_pilots_off_10; + else if (state->srate <= 25000000) + aclc = car_loop_qpsk_low[i].crl_pilots_off_20; + else + aclc = car_loop_qpsk_low[i].crl_pilots_off_30; + } + + } else if (modcod <= STV090x_8PSK_910) { + if (pilots) { + if (state->srate <= 3000000) + aclc = car_loop[i].crl_pilots_on_2; + else if (state->srate <= 7000000) + aclc = car_loop[i].crl_pilots_on_5; + else if (state->srate <= 15000000) + aclc = car_loop[i].crl_pilots_on_10; + else if (state->srate <= 25000000) + aclc = car_loop[i].crl_pilots_on_20; + else + aclc = car_loop[i].crl_pilots_on_30; + } else { + if (state->srate <= 3000000) + aclc = car_loop[i].crl_pilots_off_2; + else if (state->srate <= 7000000) + aclc = car_loop[i].crl_pilots_off_5; + else if (state->srate <= 15000000) + aclc = car_loop[i].crl_pilots_off_10; + else if (state->srate <= 25000000) + aclc = car_loop[i].crl_pilots_off_20; + else + aclc = car_loop[i].crl_pilots_off_30; + } + } else { /* 16APSK and 32APSK */ + if (state->srate <= 3000000) + aclc = car_loop_apsk_low[i].crl_pilots_on_2; + else if (state->srate <= 7000000) + aclc = car_loop_apsk_low[i].crl_pilots_on_5; + else if (state->srate <= 15000000) + aclc = car_loop_apsk_low[i].crl_pilots_on_10; + else if (state->srate <= 25000000) + aclc = car_loop_apsk_low[i].crl_pilots_on_20; + else + aclc = car_loop_apsk_low[i].crl_pilots_on_30; + } + + return aclc; +} + +static u8 stv090x_optimize_carloop_short(struct stv090x_state *state) +{ + struct stv090x_short_frame_crloop *short_crl = NULL; + s32 index = 0; + u8 aclc = 0x0b; + + switch (state->modulation) { + case STV090x_QPSK: + default: + index = 0; + break; + case STV090x_8PSK: + index = 1; + break; + case STV090x_16APSK: + index = 2; + break; + case STV090x_32APSK: + index = 3; + break; + } + + if (state->internal->dev_ver >= 0x30) { + /* Cut 3.0 and up */ + short_crl = stv090x_s2_short_crl_cut30; + } else { + /* Cut 2.0 and up: we don't support cuts older than 2.0 */ + short_crl = stv090x_s2_short_crl_cut20; + } + + if (state->srate <= 3000000) + aclc = short_crl[index].crl_2; + else if (state->srate <= 7000000) + aclc = short_crl[index].crl_5; + else if (state->srate <= 15000000) + aclc = short_crl[index].crl_10; + else if (state->srate <= 25000000) + aclc = short_crl[index].crl_20; + else + aclc = short_crl[index].crl_30; + + return aclc; +} + +static int stv090x_optimize_track(struct stv090x_state *state) +{ + struct dvb_frontend *fe = &state->frontend; + + enum stv090x_modcod modcod; + + s32 srate, pilots, aclc, f_1, f_0, i = 0, blind_tune = 0; + u32 reg; + + srate = stv090x_get_srate(state, state->internal->mclk); + srate += stv090x_get_tmgoffst(state, srate); + + switch (state->delsys) { + case STV090x_DVBS1: + case STV090x_DSS: + if (state->search_mode == STV090x_SEARCH_AUTO) { + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1); + STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + } + reg = STV090x_READ_DEMOD(state, DEMOD); + STV090x_SETFIELD_Px(reg, ROLLOFF_CONTROL_FIELD, state->rolloff); + STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 0x01); + if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0) + goto err; + + if (state->internal->dev_ver >= 0x30) { + if (stv090x_get_viterbi(state) < 0) + goto err; + + if (state->fec == STV090x_PR12) { + if (STV090x_WRITE_DEMOD(state, GAUSSR0, 0x98) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CCIR0, 0x18) < 0) + goto err; + } else { + if (STV090x_WRITE_DEMOD(state, GAUSSR0, 0x18) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CCIR0, 0x18) < 0) + goto err; + } + } + + if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x75) < 0) + goto err; + break; + + case STV090x_DVBS2: + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0); + STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + if (state->internal->dev_ver >= 0x30) { + if (STV090x_WRITE_DEMOD(state, ACLC, 0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, BCLC, 0) < 0) + goto err; + } + if (state->frame_len == STV090x_LONG_FRAME) { + reg = STV090x_READ_DEMOD(state, DMDMODCOD); + modcod = STV090x_GETFIELD_Px(reg, DEMOD_MODCOD_FIELD); + pilots = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) & 0x01; + aclc = stv090x_optimize_carloop(state, modcod, pilots); + if (modcod <= STV090x_QPSK_910) { + STV090x_WRITE_DEMOD(state, ACLC2S2Q, aclc); + } else if (modcod <= STV090x_8PSK_910) { + if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ACLC2S28, aclc) < 0) + goto err; + } + if ((state->demod_mode == STV090x_SINGLE) && (modcod > STV090x_8PSK_910)) { + if (modcod <= STV090x_16APSK_910) { + if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ACLC2S216A, aclc) < 0) + goto err; + } else { + if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ACLC2S232A, aclc) < 0) + goto err; + } + } + } else { + /*Carrier loop setting for short frame*/ + aclc = stv090x_optimize_carloop_short(state); + if (state->modulation == STV090x_QPSK) { + if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, aclc) < 0) + goto err; + } else if (state->modulation == STV090x_8PSK) { + if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ACLC2S28, aclc) < 0) + goto err; + } else if (state->modulation == STV090x_16APSK) { + if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ACLC2S216A, aclc) < 0) + goto err; + } else if (state->modulation == STV090x_32APSK) { + if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ACLC2S232A, aclc) < 0) + goto err; + } + } + + STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x67); /* PER */ + break; + + case STV090x_ERROR: + default: + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1); + STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + break; + } + + f_1 = STV090x_READ_DEMOD(state, CFR2); + f_0 = STV090x_READ_DEMOD(state, CFR1); + reg = STV090x_READ_DEMOD(state, TMGOBS); + + if (state->algo == STV090x_BLIND_SEARCH) { + STV090x_WRITE_DEMOD(state, SFRSTEP, 0x00); + reg = STV090x_READ_DEMOD(state, DMDCFGMD); + STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00); + if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0) + goto err; + + if (stv090x_set_srate(state, srate) < 0) + goto err; + blind_tune = 1; + + if (stv090x_dvbs_track_crl(state) < 0) + goto err; + } + + if (state->internal->dev_ver >= 0x20) { + if ((state->search_mode == STV090x_SEARCH_DVBS1) || + (state->search_mode == STV090x_SEARCH_DSS) || + (state->search_mode == STV090x_SEARCH_AUTO)) { + + if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x0a) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x00) < 0) + goto err; + } + } + + if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0) + goto err; + + /* AUTO tracking MODE */ + if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x80) < 0) + goto err; + /* AUTO tracking MODE */ + if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x80) < 0) + goto err; + + if ((state->internal->dev_ver >= 0x20) || (blind_tune == 1) || + (state->srate < 10000000)) { + /* update initial carrier freq with the found freq offset */ + if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0) + goto err; + state->tuner_bw = stv090x_car_width(srate, state->rolloff) + 10000000; + + if ((state->internal->dev_ver >= 0x20) || (blind_tune == 1)) { + + if (state->algo != STV090x_WARM_SEARCH) { + + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_set_bandwidth) { + if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + } + } + if ((state->algo == STV090x_BLIND_SEARCH) || (state->srate < 10000000)) + msleep(50); /* blind search: wait 50ms for SR stabilization */ + else + msleep(5); + + stv090x_get_lock_tmg(state); + + if (!(stv090x_get_dmdlock(state, (state->DemodTimeout / 2)))) { + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0) + goto err; + + i = 0; + + while ((!(stv090x_get_dmdlock(state, (state->DemodTimeout / 2)))) && (i <= 2)) { + + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0) + goto err; + i++; + } + } + + } + + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0) + goto err; + } + + if ((state->delsys == STV090x_DVBS1) || (state->delsys == STV090x_DSS)) + stv090x_set_vit_thtracq(state); + + return 0; + +err_gateoff: + stv090x_i2c_gate_ctrl(state, 0); +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_get_feclock(struct stv090x_state *state, s32 timeout) +{ + s32 timer = 0, lock = 0, stat; + u32 reg; + + while ((timer < timeout) && (!lock)) { + reg = STV090x_READ_DEMOD(state, DMDSTATE); + stat = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD); + + switch (stat) { + case 0: /* searching */ + case 1: /* first PLH detected */ + default: + lock = 0; + break; + + case 2: /* DVB-S2 mode */ + reg = STV090x_READ_DEMOD(state, PDELSTATUS1); + lock = STV090x_GETFIELD_Px(reg, PKTDELIN_LOCK_FIELD); + break; + + case 3: /* DVB-S1/legacy mode */ + reg = STV090x_READ_DEMOD(state, VSTATUSVIT); + lock = STV090x_GETFIELD_Px(reg, LOCKEDVIT_FIELD); + break; + } + if (!lock) { + msleep(10); + timer += 10; + } + } + return lock; +} + +static int stv090x_get_lock(struct stv090x_state *state, s32 timeout_dmd, s32 timeout_fec) +{ + u32 reg; + s32 timer = 0; + int lock; + + lock = stv090x_get_dmdlock(state, timeout_dmd); + if (lock) + lock = stv090x_get_feclock(state, timeout_fec); + + if (lock) { + lock = 0; + + while ((timer < timeout_fec) && (!lock)) { + reg = STV090x_READ_DEMOD(state, TSSTATUS); + lock = STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD); + msleep(1); + timer++; + } + } + + return lock; +} + +static int stv090x_set_s2rolloff(struct stv090x_state *state) +{ + u32 reg; + + if (state->internal->dev_ver <= 0x20) { + /* rolloff to auto mode if DVBS2 */ + reg = STV090x_READ_DEMOD(state, DEMOD); + STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 0x00); + if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0) + goto err; + } else { + /* DVB-S2 rolloff to auto mode if DVBS2 */ + reg = STV090x_READ_DEMOD(state, DEMOD); + STV090x_SETFIELD_Px(reg, MANUAL_S2ROLLOFF_FIELD, 0x00); + if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0) + goto err; + } + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + + +static enum stv090x_signal_state stv090x_algo(struct stv090x_state *state) +{ + struct dvb_frontend *fe = &state->frontend; + enum stv090x_signal_state signal_state = STV090x_NOCARRIER; + u32 reg; + s32 agc1_power, power_iq = 0, i; + int lock = 0, low_sr = 0; + + reg = STV090x_READ_DEMOD(state, TSCFGH); + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 1); /* Stop path 1 stream merger */ + if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Demod stop */ + goto err; + + if (state->internal->dev_ver >= 0x20) { + if (state->srate > 5000000) { + if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0) + goto err; + } else { + if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x82) < 0) + goto err; + } + } + + stv090x_get_lock_tmg(state); + + if (state->algo == STV090x_BLIND_SEARCH) { + state->tuner_bw = 2 * 36000000; /* wide bw for unknown srate */ + if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc0) < 0) /* wider srate scan */ + goto err; + if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0) + goto err; + if (stv090x_set_srate(state, 1000000) < 0) /* initial srate = 1Msps */ + goto err; + } else { + /* known srate */ + if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x20) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, TMGCFG, 0xd2) < 0) + goto err; + + if (state->srate < 2000000) { + /* SR < 2MSPS */ + if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x63) < 0) + goto err; + } else { + /* SR >= 2Msps */ + if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0) + goto err; + } + + if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0) + goto err; + + if (state->internal->dev_ver >= 0x20) { + if (STV090x_WRITE_DEMOD(state, KREFTMG, 0x5a) < 0) + goto err; + if (state->algo == STV090x_COLD_SEARCH) + state->tuner_bw = (15 * (stv090x_car_width(state->srate, state->rolloff) + 10000000)) / 10; + else if (state->algo == STV090x_WARM_SEARCH) + state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + 10000000; + } + + /* if cold start or warm (Symbolrate is known) + * use a Narrow symbol rate scan range + */ + if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0) /* narrow srate scan */ + goto err; + + if (stv090x_set_srate(state, state->srate) < 0) + goto err; + + if (stv090x_set_max_srate(state, state->internal->mclk, + state->srate) < 0) + goto err; + if (stv090x_set_min_srate(state, state->internal->mclk, + state->srate) < 0) + goto err; + + if (state->srate >= 10000000) + low_sr = 0; + else + low_sr = 1; + } + + /* Setup tuner */ + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_set_bbgain) { + reg = state->config->tuner_bbgain; + if (reg == 0) + reg = 10; /* default: 10dB */ + if (state->config->tuner_set_bbgain(fe, reg) < 0) + goto err_gateoff; + } + + if (state->config->tuner_set_frequency) { + if (state->config->tuner_set_frequency(fe, state->frequency) < 0) + goto err_gateoff; + } + + if (state->config->tuner_set_bandwidth) { + if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + msleep(50); + + if (state->config->tuner_get_status) { + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + if (state->config->tuner_get_status(fe, ®) < 0) + goto err_gateoff; + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + if (reg) + dprintk(FE_DEBUG, 1, "Tuner phase locked"); + else { + dprintk(FE_DEBUG, 1, "Tuner unlocked"); + return STV090x_NOCARRIER; + } + } + + msleep(10); + agc1_power = MAKEWORD16(STV090x_READ_DEMOD(state, AGCIQIN1), + STV090x_READ_DEMOD(state, AGCIQIN0)); + + if (agc1_power == 0) { + /* If AGC1 integrator value is 0 + * then read POWERI, POWERQ + */ + for (i = 0; i < 5; i++) { + power_iq += (STV090x_READ_DEMOD(state, POWERI) + + STV090x_READ_DEMOD(state, POWERQ)) >> 1; + } + power_iq /= 5; + } + + if ((agc1_power == 0) && (power_iq < STV090x_IQPOWER_THRESHOLD)) { + dprintk(FE_ERROR, 1, "No Signal: POWER_IQ=0x%02x", power_iq); + lock = 0; + signal_state = STV090x_NOAGC1; + } else { + reg = STV090x_READ_DEMOD(state, DEMOD); + STV090x_SETFIELD_Px(reg, SPECINV_CONTROL_FIELD, state->inversion); + + if (state->internal->dev_ver <= 0x20) { + /* rolloff to auto mode if DVBS2 */ + STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 1); + } else { + /* DVB-S2 rolloff to auto mode if DVBS2 */ + STV090x_SETFIELD_Px(reg, MANUAL_S2ROLLOFF_FIELD, 1); + } + if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0) + goto err; + + if (stv090x_delivery_search(state) < 0) + goto err; + + if (state->algo != STV090x_BLIND_SEARCH) { + if (stv090x_start_search(state) < 0) + goto err; + } + } + + if (signal_state == STV090x_NOAGC1) + return signal_state; + + if (state->algo == STV090x_BLIND_SEARCH) + lock = stv090x_blind_search(state); + + else if (state->algo == STV090x_COLD_SEARCH) + lock = stv090x_get_coldlock(state, state->DemodTimeout); + + else if (state->algo == STV090x_WARM_SEARCH) + lock = stv090x_get_dmdlock(state, state->DemodTimeout); + + if ((!lock) && (state->algo == STV090x_COLD_SEARCH)) { + if (!low_sr) { + if (stv090x_chk_tmg(state)) + lock = stv090x_sw_algo(state); + } + } + + if (lock) + signal_state = stv090x_get_sig_params(state); + + if ((lock) && (signal_state == STV090x_RANGEOK)) { /* signal within Range */ + stv090x_optimize_track(state); + + if (state->internal->dev_ver >= 0x20) { + /* >= Cut 2.0 :release TS reset after + * demod lock and optimized Tracking + */ + reg = STV090x_READ_DEMOD(state, TSCFGH); + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0); /* release merger reset */ + if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0) + goto err; + + msleep(3); + + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 1); /* merger reset */ + if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0) + goto err; + + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0); /* release merger reset */ + if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0) + goto err; + } + + lock = stv090x_get_lock(state, state->FecTimeout, + state->FecTimeout); + if (lock) { + if (state->delsys == STV090x_DVBS2) { + stv090x_set_s2rolloff(state); + + reg = STV090x_READ_DEMOD(state, PDELCTRL2); + STV090x_SETFIELD_Px(reg, RESET_UPKO_COUNT, 1); + if (STV090x_WRITE_DEMOD(state, PDELCTRL2, reg) < 0) + goto err; + /* Reset DVBS2 packet delinator error counter */ + reg = STV090x_READ_DEMOD(state, PDELCTRL2); + STV090x_SETFIELD_Px(reg, RESET_UPKO_COUNT, 0); + if (STV090x_WRITE_DEMOD(state, PDELCTRL2, reg) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x67) < 0) /* PER */ + goto err; + } else { + if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x75) < 0) + goto err; + } + /* Reset the Total packet counter */ + if (STV090x_WRITE_DEMOD(state, FBERCPT4, 0x00) < 0) + goto err; + /* Reset the packet Error counter2 */ + if (STV090x_WRITE_DEMOD(state, ERRCTRL2, 0xc1) < 0) + goto err; + } else { + signal_state = STV090x_NODATA; + stv090x_chk_signal(state); + } + } + return signal_state; + +err_gateoff: + stv090x_i2c_gate_ctrl(state, 0); +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_set_mis(struct stv090x_state *state, int mis) +{ + u32 reg; + + if (mis < 0 || mis > 255) { + dprintk(FE_DEBUG, 1, "Disable MIS filtering"); + reg = STV090x_READ_DEMOD(state, PDELCTRL1); + STV090x_SETFIELD_Px(reg, FILTER_EN_FIELD, 0x00); + if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0) + goto err; + } else { + dprintk(FE_DEBUG, 1, "Enable MIS filtering - %d", mis); + reg = STV090x_READ_DEMOD(state, PDELCTRL1); + STV090x_SETFIELD_Px(reg, FILTER_EN_FIELD, 0x01); + if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ISIENTRY, mis) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ISIBITENA, 0xff) < 0) + goto err; + } + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static enum dvbfe_search stv090x_search(struct dvb_frontend *fe) +{ + struct stv090x_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *props = &fe->dtv_property_cache; + + if (props->frequency == 0) + return DVBFE_ALGO_SEARCH_INVALID; + + state->delsys = props->delivery_system; + state->frequency = props->frequency; + state->srate = props->symbol_rate; + state->search_mode = STV090x_SEARCH_AUTO; + state->algo = STV090x_COLD_SEARCH; + state->fec = STV090x_PRERR; + if (state->srate > 10000000) { + dprintk(FE_DEBUG, 1, "Search range: 10 MHz"); + state->search_range = 10000000; + } else { + dprintk(FE_DEBUG, 1, "Search range: 5 MHz"); + state->search_range = 5000000; + } + + stv090x_set_mis(state, props->stream_id); + + if (stv090x_algo(state) == STV090x_RANGEOK) { + dprintk(FE_DEBUG, 1, "Search success!"); + return DVBFE_ALGO_SEARCH_SUCCESS; + } else { + dprintk(FE_DEBUG, 1, "Search failed!"); + return DVBFE_ALGO_SEARCH_FAILED; + } + + return DVBFE_ALGO_SEARCH_ERROR; +} + +static int stv090x_read_status(struct dvb_frontend *fe, enum fe_status *status) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg, dstatus; + u8 search_state; + + *status = 0; + + dstatus = STV090x_READ_DEMOD(state, DSTATUS); + if (STV090x_GETFIELD_Px(dstatus, CAR_LOCK_FIELD)) + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; + + reg = STV090x_READ_DEMOD(state, DMDSTATE); + search_state = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD); + + switch (search_state) { + case 0: /* searching */ + case 1: /* first PLH detected */ + default: + dprintk(FE_DEBUG, 1, "Status: Unlocked (Searching ..)"); + break; + + case 2: /* DVB-S2 mode */ + dprintk(FE_DEBUG, 1, "Delivery system: DVB-S2"); + if (STV090x_GETFIELD_Px(dstatus, LOCK_DEFINITIF_FIELD)) { + reg = STV090x_READ_DEMOD(state, PDELSTATUS1); + if (STV090x_GETFIELD_Px(reg, PKTDELIN_LOCK_FIELD)) { + *status |= FE_HAS_VITERBI; + reg = STV090x_READ_DEMOD(state, TSSTATUS); + if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + } + } + break; + + case 3: /* DVB-S1/legacy mode */ + dprintk(FE_DEBUG, 1, "Delivery system: DVB-S"); + if (STV090x_GETFIELD_Px(dstatus, LOCK_DEFINITIF_FIELD)) { + reg = STV090x_READ_DEMOD(state, VSTATUSVIT); + if (STV090x_GETFIELD_Px(reg, LOCKEDVIT_FIELD)) { + *status |= FE_HAS_VITERBI; + reg = STV090x_READ_DEMOD(state, TSSTATUS); + if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + } + } + break; + } + + return 0; +} + +static int stv090x_read_per(struct dvb_frontend *fe, u32 *per) +{ + struct stv090x_state *state = fe->demodulator_priv; + + s32 count_4, count_3, count_2, count_1, count_0, count; + u32 reg, h, m, l; + enum fe_status status; + + stv090x_read_status(fe, &status); + if (!(status & FE_HAS_LOCK)) { + *per = 1 << 23; /* Max PER */ + } else { + /* Counter 2 */ + reg = STV090x_READ_DEMOD(state, ERRCNT22); + h = STV090x_GETFIELD_Px(reg, ERR_CNT2_FIELD); + + reg = STV090x_READ_DEMOD(state, ERRCNT21); + m = STV090x_GETFIELD_Px(reg, ERR_CNT21_FIELD); + + reg = STV090x_READ_DEMOD(state, ERRCNT20); + l = STV090x_GETFIELD_Px(reg, ERR_CNT20_FIELD); + + *per = ((h << 16) | (m << 8) | l); + + count_4 = STV090x_READ_DEMOD(state, FBERCPT4); + count_3 = STV090x_READ_DEMOD(state, FBERCPT3); + count_2 = STV090x_READ_DEMOD(state, FBERCPT2); + count_1 = STV090x_READ_DEMOD(state, FBERCPT1); + count_0 = STV090x_READ_DEMOD(state, FBERCPT0); + + if ((!count_4) && (!count_3)) { + count = (count_2 & 0xff) << 16; + count |= (count_1 & 0xff) << 8; + count |= count_0 & 0xff; + } else { + count = 1 << 24; + } + if (count == 0) + *per = 1; + } + if (STV090x_WRITE_DEMOD(state, FBERCPT4, 0) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ERRCTRL2, 0xc1) < 0) + goto err; + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_table_lookup(const struct stv090x_tab *tab, int max, int val) +{ + int res = 0; + int min = 0, med; + + if ((val >= tab[min].read && val < tab[max].read) || + (val >= tab[max].read && val < tab[min].read)) { + while ((max - min) > 1) { + med = (max + min) / 2; + if ((val >= tab[min].read && val < tab[med].read) || + (val >= tab[med].read && val < tab[min].read)) + max = med; + else + min = med; + } + res = ((val - tab[min].read) * + (tab[max].real - tab[min].real) / + (tab[max].read - tab[min].read)) + + tab[min].real; + } else { + if (tab[min].read < tab[max].read) { + if (val < tab[min].read) + res = tab[min].real; + else if (val >= tab[max].read) + res = tab[max].real; + } else { + if (val >= tab[min].read) + res = tab[min].real; + else if (val < tab[max].read) + res = tab[max].real; + } + } + + return res; +} + +static int stv090x_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg; + s32 agc_0, agc_1, agc; + s32 str; + + reg = STV090x_READ_DEMOD(state, AGCIQIN1); + agc_1 = STV090x_GETFIELD_Px(reg, AGCIQ_VALUE_FIELD); + reg = STV090x_READ_DEMOD(state, AGCIQIN0); + agc_0 = STV090x_GETFIELD_Px(reg, AGCIQ_VALUE_FIELD); + agc = MAKEWORD16(agc_1, agc_0); + + str = stv090x_table_lookup(stv090x_rf_tab, + ARRAY_SIZE(stv090x_rf_tab) - 1, agc); + if (agc > stv090x_rf_tab[0].read) + str = 0; + else if (agc < stv090x_rf_tab[ARRAY_SIZE(stv090x_rf_tab) - 1].read) + str = -100; + *strength = (str + 100) * 0xFFFF / 100; + + return 0; +} + +static int stv090x_read_cnr(struct dvb_frontend *fe, u16 *cnr) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg_0, reg_1, reg, i; + s32 val_0, val_1, val = 0; + u8 lock_f; + s32 div; + u32 last; + + switch (state->delsys) { + case STV090x_DVBS2: + reg = STV090x_READ_DEMOD(state, DSTATUS); + lock_f = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD); + if (lock_f) { + msleep(5); + for (i = 0; i < 16; i++) { + reg_1 = STV090x_READ_DEMOD(state, NNOSPLHT1); + val_1 = STV090x_GETFIELD_Px(reg_1, NOSPLHT_NORMED_FIELD); + reg_0 = STV090x_READ_DEMOD(state, NNOSPLHT0); + val_0 = STV090x_GETFIELD_Px(reg_0, NOSPLHT_NORMED_FIELD); + val += MAKEWORD16(val_1, val_0); + msleep(1); + } + val /= 16; + last = ARRAY_SIZE(stv090x_s2cn_tab) - 1; + div = stv090x_s2cn_tab[0].read - + stv090x_s2cn_tab[last].read; + *cnr = 0xFFFF - ((val * 0xFFFF) / div); + } + break; + + case STV090x_DVBS1: + case STV090x_DSS: + reg = STV090x_READ_DEMOD(state, DSTATUS); + lock_f = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD); + if (lock_f) { + msleep(5); + for (i = 0; i < 16; i++) { + reg_1 = STV090x_READ_DEMOD(state, NOSDATAT1); + val_1 = STV090x_GETFIELD_Px(reg_1, NOSDATAT_UNNORMED_FIELD); + reg_0 = STV090x_READ_DEMOD(state, NOSDATAT0); + val_0 = STV090x_GETFIELD_Px(reg_0, NOSDATAT_UNNORMED_FIELD); + val += MAKEWORD16(val_1, val_0); + msleep(1); + } + val /= 16; + last = ARRAY_SIZE(stv090x_s1cn_tab) - 1; + div = stv090x_s1cn_tab[0].read - + stv090x_s1cn_tab[last].read; + *cnr = 0xFFFF - ((val * 0xFFFF) / div); + } + break; + default: + break; + } + + return 0; +} + +static int stv090x_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg; + + reg = STV090x_READ_DEMOD(state, DISTXCTL); + switch (tone) { + case SEC_TONE_ON: + STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, 0); + STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + break; + + case SEC_TONE_OFF: + STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, 0); + STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + break; + default: + return -EINVAL; + } + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + + +static enum dvbfe_algo stv090x_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + +static int stv090x_send_diseqc_msg(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg, idle = 0, fifo_full = 1; + int i; + + reg = STV090x_READ_DEMOD(state, DISTXCTL); + + STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, + (state->config->diseqc_envelope_mode) ? 4 : 2); + STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + + STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + + for (i = 0; i < cmd->msg_len; i++) { + + while (fifo_full) { + reg = STV090x_READ_DEMOD(state, DISTXSTATUS); + fifo_full = STV090x_GETFIELD_Px(reg, FIFO_FULL_FIELD); + } + + if (STV090x_WRITE_DEMOD(state, DISTXDATA, cmd->msg[i]) < 0) + goto err; + } + reg = STV090x_READ_DEMOD(state, DISTXCTL); + STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + + i = 0; + + while ((!idle) && (i < 10)) { + reg = STV090x_READ_DEMOD(state, DISTXSTATUS); + idle = STV090x_GETFIELD_Px(reg, TX_IDLE_FIELD); + msleep(10); + i++; + } + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg, idle = 0, fifo_full = 1; + u8 mode, value; + int i; + + reg = STV090x_READ_DEMOD(state, DISTXCTL); + + if (burst == SEC_MINI_A) { + mode = (state->config->diseqc_envelope_mode) ? 5 : 3; + value = 0x00; + } else { + mode = (state->config->diseqc_envelope_mode) ? 4 : 2; + value = 0xFF; + } + + STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, mode); + STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + + STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 1); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + + while (fifo_full) { + reg = STV090x_READ_DEMOD(state, DISTXSTATUS); + fifo_full = STV090x_GETFIELD_Px(reg, FIFO_FULL_FIELD); + } + + if (STV090x_WRITE_DEMOD(state, DISTXDATA, value) < 0) + goto err; + + reg = STV090x_READ_DEMOD(state, DISTXCTL); + STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 0); + if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0) + goto err; + + i = 0; + + while ((!idle) && (i < 10)) { + reg = STV090x_READ_DEMOD(state, DISTXSTATUS); + idle = STV090x_GETFIELD_Px(reg, TX_IDLE_FIELD); + msleep(10); + i++; + } + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_recv_slave_reply(struct dvb_frontend *fe, struct dvb_diseqc_slave_reply *reply) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg = 0, i = 0, rx_end = 0; + + while ((rx_end != 1) && (i < 10)) { + msleep(10); + i++; + reg = STV090x_READ_DEMOD(state, DISRX_ST0); + rx_end = STV090x_GETFIELD_Px(reg, RX_END_FIELD); + } + + if (rx_end) { + reply->msg_len = STV090x_GETFIELD_Px(reg, FIFO_BYTENBR_FIELD); + for (i = 0; i < reply->msg_len; i++) + reply->msg[i] = STV090x_READ_DEMOD(state, DISRXDATA); + } + + return 0; +} + +static int stv090x_sleep(struct dvb_frontend *fe) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg; + u8 full_standby = 0; + + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (state->config->tuner_sleep) { + if (state->config->tuner_sleep(fe) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + dprintk(FE_DEBUG, 1, "Set %s(%d) to sleep", + state->device == STV0900 ? "STV0900" : "STV0903", + state->demod); + + mutex_lock(&state->internal->demod_lock); + + switch (state->demod) { + case STV090x_DEMODULATOR_0: + /* power off ADC 1 */ + reg = stv090x_read_reg(state, STV090x_TSTTNR1); + STV090x_SETFIELD(reg, ADC1_PON_FIELD, 0); + if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0) + goto err_unlock; + /* power off DiSEqC 1 */ + reg = stv090x_read_reg(state, STV090x_TSTTNR2); + STV090x_SETFIELD(reg, DISEQC1_PON_FIELD, 0); + if (stv090x_write_reg(state, STV090x_TSTTNR2, reg) < 0) + goto err_unlock; + + /* check whether path 2 is already sleeping, that is when + ADC2 is off */ + reg = stv090x_read_reg(state, STV090x_TSTTNR3); + if (STV090x_GETFIELD(reg, ADC2_PON_FIELD) == 0) + full_standby = 1; + + /* stop clocks */ + reg = stv090x_read_reg(state, STV090x_STOPCLK1); + /* packet delineator 1 clock */ + STV090x_SETFIELD(reg, STOP_CLKPKDT1_FIELD, 1); + /* ADC 1 clock */ + STV090x_SETFIELD(reg, STOP_CLKADCI1_FIELD, 1); + /* FEC clock is shared between the two paths, only stop it + when full standby is possible */ + if (full_standby) + STV090x_SETFIELD(reg, STOP_CLKFEC_FIELD, 1); + if (stv090x_write_reg(state, STV090x_STOPCLK1, reg) < 0) + goto err_unlock; + reg = stv090x_read_reg(state, STV090x_STOPCLK2); + /* sampling 1 clock */ + STV090x_SETFIELD(reg, STOP_CLKSAMP1_FIELD, 1); + /* viterbi 1 clock */ + STV090x_SETFIELD(reg, STOP_CLKVIT1_FIELD, 1); + /* TS clock is shared between the two paths, only stop it + when full standby is possible */ + if (full_standby) + STV090x_SETFIELD(reg, STOP_CLKTS_FIELD, 1); + if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0) + goto err_unlock; + break; + + case STV090x_DEMODULATOR_1: + /* power off ADC 2 */ + reg = stv090x_read_reg(state, STV090x_TSTTNR3); + STV090x_SETFIELD(reg, ADC2_PON_FIELD, 0); + if (stv090x_write_reg(state, STV090x_TSTTNR3, reg) < 0) + goto err_unlock; + /* power off DiSEqC 2 */ + reg = stv090x_read_reg(state, STV090x_TSTTNR4); + STV090x_SETFIELD(reg, DISEQC2_PON_FIELD, 0); + if (stv090x_write_reg(state, STV090x_TSTTNR4, reg) < 0) + goto err_unlock; + + /* check whether path 1 is already sleeping, that is when + ADC1 is off */ + reg = stv090x_read_reg(state, STV090x_TSTTNR1); + if (STV090x_GETFIELD(reg, ADC1_PON_FIELD) == 0) + full_standby = 1; + + /* stop clocks */ + reg = stv090x_read_reg(state, STV090x_STOPCLK1); + /* packet delineator 2 clock */ + STV090x_SETFIELD(reg, STOP_CLKPKDT2_FIELD, 1); + /* ADC 2 clock */ + STV090x_SETFIELD(reg, STOP_CLKADCI2_FIELD, 1); + /* FEC clock is shared between the two paths, only stop it + when full standby is possible */ + if (full_standby) + STV090x_SETFIELD(reg, STOP_CLKFEC_FIELD, 1); + if (stv090x_write_reg(state, STV090x_STOPCLK1, reg) < 0) + goto err_unlock; + reg = stv090x_read_reg(state, STV090x_STOPCLK2); + /* sampling 2 clock */ + STV090x_SETFIELD(reg, STOP_CLKSAMP2_FIELD, 1); + /* viterbi 2 clock */ + STV090x_SETFIELD(reg, STOP_CLKVIT2_FIELD, 1); + /* TS clock is shared between the two paths, only stop it + when full standby is possible */ + if (full_standby) + STV090x_SETFIELD(reg, STOP_CLKTS_FIELD, 1); + if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0) + goto err_unlock; + break; + + default: + dprintk(FE_ERROR, 1, "Wrong demodulator!"); + break; + } + + if (full_standby) { + /* general power off */ + reg = stv090x_read_reg(state, STV090x_SYNTCTRL); + STV090x_SETFIELD(reg, STANDBY_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_SYNTCTRL, reg) < 0) + goto err_unlock; + } + + mutex_unlock(&state->internal->demod_lock); + return 0; + +err_gateoff: + stv090x_i2c_gate_ctrl(state, 0); + goto err; +err_unlock: + mutex_unlock(&state->internal->demod_lock); +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_wakeup(struct dvb_frontend *fe) +{ + struct stv090x_state *state = fe->demodulator_priv; + u32 reg; + + dprintk(FE_DEBUG, 1, "Wake %s(%d) from standby", + state->device == STV0900 ? "STV0900" : "STV0903", + state->demod); + + mutex_lock(&state->internal->demod_lock); + + /* general power on */ + reg = stv090x_read_reg(state, STV090x_SYNTCTRL); + STV090x_SETFIELD(reg, STANDBY_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_SYNTCTRL, reg) < 0) + goto err; + + switch (state->demod) { + case STV090x_DEMODULATOR_0: + /* power on ADC 1 */ + reg = stv090x_read_reg(state, STV090x_TSTTNR1); + STV090x_SETFIELD(reg, ADC1_PON_FIELD, 1); + if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0) + goto err; + /* power on DiSEqC 1 */ + reg = stv090x_read_reg(state, STV090x_TSTTNR2); + STV090x_SETFIELD(reg, DISEQC1_PON_FIELD, 1); + if (stv090x_write_reg(state, STV090x_TSTTNR2, reg) < 0) + goto err; + + /* activate clocks */ + reg = stv090x_read_reg(state, STV090x_STOPCLK1); + /* packet delineator 1 clock */ + STV090x_SETFIELD(reg, STOP_CLKPKDT1_FIELD, 0); + /* ADC 1 clock */ + STV090x_SETFIELD(reg, STOP_CLKADCI1_FIELD, 0); + /* FEC clock */ + STV090x_SETFIELD(reg, STOP_CLKFEC_FIELD, 0); + if (stv090x_write_reg(state, STV090x_STOPCLK1, reg) < 0) + goto err; + reg = stv090x_read_reg(state, STV090x_STOPCLK2); + /* sampling 1 clock */ + STV090x_SETFIELD(reg, STOP_CLKSAMP1_FIELD, 0); + /* viterbi 1 clock */ + STV090x_SETFIELD(reg, STOP_CLKVIT1_FIELD, 0); + /* TS clock */ + STV090x_SETFIELD(reg, STOP_CLKTS_FIELD, 0); + if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0) + goto err; + break; + + case STV090x_DEMODULATOR_1: + /* power on ADC 2 */ + reg = stv090x_read_reg(state, STV090x_TSTTNR3); + STV090x_SETFIELD(reg, ADC2_PON_FIELD, 1); + if (stv090x_write_reg(state, STV090x_TSTTNR3, reg) < 0) + goto err; + /* power on DiSEqC 2 */ + reg = stv090x_read_reg(state, STV090x_TSTTNR4); + STV090x_SETFIELD(reg, DISEQC2_PON_FIELD, 1); + if (stv090x_write_reg(state, STV090x_TSTTNR4, reg) < 0) + goto err; + + /* activate clocks */ + reg = stv090x_read_reg(state, STV090x_STOPCLK1); + /* packet delineator 2 clock */ + STV090x_SETFIELD(reg, STOP_CLKPKDT2_FIELD, 0); + /* ADC 2 clock */ + STV090x_SETFIELD(reg, STOP_CLKADCI2_FIELD, 0); + /* FEC clock */ + STV090x_SETFIELD(reg, STOP_CLKFEC_FIELD, 0); + if (stv090x_write_reg(state, STV090x_STOPCLK1, reg) < 0) + goto err; + reg = stv090x_read_reg(state, STV090x_STOPCLK2); + /* sampling 2 clock */ + STV090x_SETFIELD(reg, STOP_CLKSAMP2_FIELD, 0); + /* viterbi 2 clock */ + STV090x_SETFIELD(reg, STOP_CLKVIT2_FIELD, 0); + /* TS clock */ + STV090x_SETFIELD(reg, STOP_CLKTS_FIELD, 0); + if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0) + goto err; + break; + + default: + dprintk(FE_ERROR, 1, "Wrong demodulator!"); + break; + } + + mutex_unlock(&state->internal->demod_lock); + return 0; +err: + mutex_unlock(&state->internal->demod_lock); + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static void stv090x_release(struct dvb_frontend *fe) +{ + struct stv090x_state *state = fe->demodulator_priv; + + state->internal->num_used--; + if (state->internal->num_used <= 0) { + + dprintk(FE_ERROR, 1, "Actually removing"); + + remove_dev(state->internal); + kfree(state->internal); + } + + kfree(state); +} + +static int stv090x_ldpc_mode(struct stv090x_state *state, enum stv090x_mode ldpc_mode) +{ + u32 reg = 0; + + reg = stv090x_read_reg(state, STV090x_GENCFG); + + switch (ldpc_mode) { + case STV090x_DUAL: + default: + if ((state->demod_mode != STV090x_DUAL) || (STV090x_GETFIELD(reg, DDEMOD_FIELD) != 1)) { + /* set LDPC to dual mode */ + if (stv090x_write_reg(state, STV090x_GENCFG, 0x1d) < 0) + goto err; + + state->demod_mode = STV090x_DUAL; + + reg = stv090x_read_reg(state, STV090x_TSTRES0); + STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x1); + if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0) + goto err; + STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x0); + if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xff) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xcc) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xcc) < 0) + goto err; + + if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xff) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xcf) < 0) + goto err; + } + break; + + case STV090x_SINGLE: + if (stv090x_stop_modcod(state) < 0) + goto err; + if (stv090x_activate_modcod_single(state) < 0) + goto err; + + if (state->demod == STV090x_DEMODULATOR_1) { + if (stv090x_write_reg(state, STV090x_GENCFG, 0x06) < 0) /* path 2 */ + goto err; + } else { + if (stv090x_write_reg(state, STV090x_GENCFG, 0x04) < 0) /* path 1 */ + goto err; + } + + reg = stv090x_read_reg(state, STV090x_TSTRES0); + STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x1); + if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0) + goto err; + STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x0); + if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0) + goto err; + + reg = STV090x_READ_DEMOD(state, PDELCTRL1); + STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x01); + if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x00); + if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0) + goto err; + break; + } + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +/* return (Hz), clk in Hz*/ +static u32 stv090x_get_mclk(struct stv090x_state *state) +{ + const struct stv090x_config *config = state->config; + u32 div, reg; + u8 ratio; + + div = stv090x_read_reg(state, STV090x_NCOARSE); + reg = stv090x_read_reg(state, STV090x_SYNTCTRL); + ratio = STV090x_GETFIELD(reg, SELX1RATIO_FIELD) ? 4 : 6; + + return (div + 1) * config->xtal / ratio; /* kHz */ +} + +static int stv090x_set_mclk(struct stv090x_state *state, u32 mclk, u32 clk) +{ + const struct stv090x_config *config = state->config; + u32 reg, div, clk_sel; + + reg = stv090x_read_reg(state, STV090x_SYNTCTRL); + clk_sel = ((STV090x_GETFIELD(reg, SELX1RATIO_FIELD) == 1) ? 4 : 6); + + div = ((clk_sel * mclk) / config->xtal) - 1; + + reg = stv090x_read_reg(state, STV090x_NCOARSE); + STV090x_SETFIELD(reg, M_DIV_FIELD, div); + if (stv090x_write_reg(state, STV090x_NCOARSE, reg) < 0) + goto err; + + state->internal->mclk = stv090x_get_mclk(state); + + /*Set the DiseqC frequency to 22KHz */ + div = state->internal->mclk / 704000; + if (STV090x_WRITE_DEMOD(state, F22TX, div) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, F22RX, div) < 0) + goto err; + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv0900_set_tspath(struct stv090x_state *state) +{ + u32 reg; + + if (state->internal->dev_ver >= 0x20) { + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + switch (state->config->ts2_mode) { + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + stv090x_write_reg(state, STV090x_TSGENERAL, 0x00); + break; + + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x06) < 0) /* Mux'd stream mode */ + goto err; + reg = stv090x_read_reg(state, STV090x_P1_TSCFGM); + STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3); + if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0) + goto err; + reg = stv090x_read_reg(state, STV090x_P2_TSCFGM); + STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3); + if (stv090x_write_reg(state, STV090x_P2_TSCFGM, reg) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_P1_TSSPEED, 0x14) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_P2_TSSPEED, 0x28) < 0) + goto err; + break; + } + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + switch (state->config->ts2_mode) { + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c) < 0) + goto err; + break; + + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0a) < 0) + goto err; + break; + } + break; + } + } else { + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + switch (state->config->ts2_mode) { + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x10); + break; + + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x16); + reg = stv090x_read_reg(state, STV090x_P1_TSCFGM); + STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3); + if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0) + goto err; + reg = stv090x_read_reg(state, STV090x_P1_TSCFGM); + STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 0); + if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_P1_TSSPEED, 0x14) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_P2_TSSPEED, 0x28) < 0) + goto err; + break; + } + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + switch (state->config->ts2_mode) { + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x14); + break; + + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x12); + break; + } + break; + } + } + + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts1_tei); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_DVBCI: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts1_tei); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts1_tei); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_SERIAL_CONTINUOUS: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts1_tei); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + default: + break; + } + + switch (state->config->ts2_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + reg = stv090x_read_reg(state, STV090x_P2_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts2_tei); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_DVBCI: + reg = stv090x_read_reg(state, STV090x_P2_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts2_tei); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + reg = stv090x_read_reg(state, STV090x_P2_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts2_tei); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_SERIAL_CONTINUOUS: + reg = stv090x_read_reg(state, STV090x_P2_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts2_tei); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0) + goto err; + break; + + default: + break; + } + + if (state->config->ts1_clk > 0) { + u32 speed; + + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + default: + speed = state->internal->mclk / + (state->config->ts1_clk / 4); + if (speed < 0x08) + speed = 0x08; + if (speed > 0xFF) + speed = 0xFF; + break; + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + speed = state->internal->mclk / + (state->config->ts1_clk / 32); + if (speed < 0x20) + speed = 0x20; + if (speed > 0xFF) + speed = 0xFF; + break; + } + reg = stv090x_read_reg(state, STV090x_P1_TSCFGM); + STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3); + if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_P1_TSSPEED, speed) < 0) + goto err; + } + + if (state->config->ts2_clk > 0) { + u32 speed; + + switch (state->config->ts2_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + default: + speed = state->internal->mclk / + (state->config->ts2_clk / 4); + if (speed < 0x08) + speed = 0x08; + if (speed > 0xFF) + speed = 0xFF; + break; + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + speed = state->internal->mclk / + (state->config->ts2_clk / 32); + if (speed < 0x20) + speed = 0x20; + if (speed > 0xFF) + speed = 0xFF; + break; + } + reg = stv090x_read_reg(state, STV090x_P2_TSCFGM); + STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3); + if (stv090x_write_reg(state, STV090x_P2_TSCFGM, reg) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_P2_TSSPEED, speed) < 0) + goto err; + } + + reg = stv090x_read_reg(state, STV090x_P2_TSCFGH); + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0) + goto err; + + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv0903_set_tspath(struct stv090x_state *state) +{ + u32 reg; + + if (state->internal->dev_ver >= 0x20) { + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + stv090x_write_reg(state, STV090x_TSGENERAL, 0x00); + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c); + break; + } + } else { + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x10); + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x14); + break; + } + } + + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_DVBCI: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_SERIAL_CONTINUOUS: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + default: + break; + } + + if (state->config->ts1_clk > 0) { + u32 speed; + + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + default: + speed = state->internal->mclk / + (state->config->ts1_clk / 4); + if (speed < 0x08) + speed = 0x08; + if (speed > 0xFF) + speed = 0xFF; + break; + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + speed = state->internal->mclk / + (state->config->ts1_clk / 32); + if (speed < 0x20) + speed = 0x20; + if (speed > 0xFF) + speed = 0xFF; + break; + } + reg = stv090x_read_reg(state, STV090x_P1_TSCFGM); + STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3); + if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_P1_TSSPEED, speed) < 0) + goto err; + } + + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_init(struct dvb_frontend *fe) +{ + struct stv090x_state *state = fe->demodulator_priv; + const struct stv090x_config *config = state->config; + u32 reg; + + if (state->internal->mclk == 0) { + /* call tuner init to configure the tuner's clock output + divider directly before setting up the master clock of + the stv090x. */ + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (config->tuner_init) { + if (config->tuner_init(fe) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + stv090x_set_mclk(state, 135000000, config->xtal); /* 135 Mhz */ + msleep(5); + if (stv090x_write_reg(state, STV090x_SYNTCTRL, + 0x20 | config->clk_mode) < 0) + goto err; + stv090x_get_mclk(state); + } + + if (stv090x_wakeup(fe) < 0) { + dprintk(FE_ERROR, 1, "Error waking device"); + goto err; + } + + if (stv090x_ldpc_mode(state, state->demod_mode) < 0) + goto err; + + reg = STV090x_READ_DEMOD(state, TNRCFG2); + STV090x_SETFIELD_Px(reg, TUN_IQSWAP_FIELD, state->inversion); + if (STV090x_WRITE_DEMOD(state, TNRCFG2, reg) < 0) + goto err; + reg = STV090x_READ_DEMOD(state, DEMOD); + STV090x_SETFIELD_Px(reg, ROLLOFF_CONTROL_FIELD, state->rolloff); + if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0) + goto err; + + if (stv090x_i2c_gate_ctrl(state, 1) < 0) + goto err; + + if (config->tuner_set_mode) { + if (config->tuner_set_mode(fe, TUNER_WAKE) < 0) + goto err_gateoff; + } + + if (config->tuner_init) { + if (config->tuner_init(fe) < 0) + goto err_gateoff; + } + + if (stv090x_i2c_gate_ctrl(state, 0) < 0) + goto err; + + if (state->device == STV0900) { + if (stv0900_set_tspath(state) < 0) + goto err; + } else { + if (stv0903_set_tspath(state) < 0) + goto err; + } + + return 0; + +err_gateoff: + stv090x_i2c_gate_ctrl(state, 0); +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +static int stv090x_setup(struct dvb_frontend *fe) +{ + struct stv090x_state *state = fe->demodulator_priv; + const struct stv090x_config *config = state->config; + const struct stv090x_reg *stv090x_initval = NULL; + const struct stv090x_reg *stv090x_cut20_val = NULL; + unsigned long t1_size = 0, t2_size = 0; + u32 reg = 0; + + int i; + + if (state->device == STV0900) { + dprintk(FE_DEBUG, 1, "Initializing STV0900"); + stv090x_initval = stv0900_initval; + t1_size = ARRAY_SIZE(stv0900_initval); + stv090x_cut20_val = stv0900_cut20_val; + t2_size = ARRAY_SIZE(stv0900_cut20_val); + } else if (state->device == STV0903) { + dprintk(FE_DEBUG, 1, "Initializing STV0903"); + stv090x_initval = stv0903_initval; + t1_size = ARRAY_SIZE(stv0903_initval); + stv090x_cut20_val = stv0903_cut20_val; + t2_size = ARRAY_SIZE(stv0903_cut20_val); + } + + /* STV090x init */ + + /* Stop Demod */ + if (stv090x_write_reg(state, STV090x_P1_DMDISTATE, 0x5c) < 0) + goto err; + if (state->device == STV0900) + if (stv090x_write_reg(state, STV090x_P2_DMDISTATE, 0x5c) < 0) + goto err; + + msleep(5); + + /* Set No Tuner Mode */ + if (stv090x_write_reg(state, STV090x_P1_TNRCFG, 0x6c) < 0) + goto err; + if (state->device == STV0900) + if (stv090x_write_reg(state, STV090x_P2_TNRCFG, 0x6c) < 0) + goto err; + + /* I2C repeater OFF */ + STV090x_SETFIELD_Px(reg, ENARPT_LEVEL_FIELD, config->repeater_level); + if (stv090x_write_reg(state, STV090x_P1_I2CRPT, reg) < 0) + goto err; + if (state->device == STV0900) + if (stv090x_write_reg(state, STV090x_P2_I2CRPT, reg) < 0) + goto err; + + if (stv090x_write_reg(state, STV090x_NCOARSE, 0x13) < 0) /* set PLL divider */ + goto err; + msleep(5); + if (stv090x_write_reg(state, STV090x_I2CCFG, 0x08) < 0) /* 1/41 oversampling */ + goto err; + if (stv090x_write_reg(state, STV090x_SYNTCTRL, 0x20 | config->clk_mode) < 0) /* enable PLL */ + goto err; + msleep(5); + + /* write initval */ + dprintk(FE_DEBUG, 1, "Setting up initial values"); + for (i = 0; i < t1_size; i++) { + if (stv090x_write_reg(state, stv090x_initval[i].addr, stv090x_initval[i].data) < 0) + goto err; + } + + state->internal->dev_ver = stv090x_read_reg(state, STV090x_MID); + if (state->internal->dev_ver >= 0x20) { + if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c) < 0) + goto err; + + /* write cut20_val*/ + dprintk(FE_DEBUG, 1, "Setting up Cut 2.0 initial values"); + for (i = 0; i < t2_size; i++) { + if (stv090x_write_reg(state, stv090x_cut20_val[i].addr, stv090x_cut20_val[i].data) < 0) + goto err; + } + + } else if (state->internal->dev_ver < 0x20) { + dprintk(FE_ERROR, 1, "ERROR: Unsupported Cut: 0x%02x!", + state->internal->dev_ver); + + goto err; + } else if (state->internal->dev_ver > 0x30) { + /* we shouldn't bail out from here */ + dprintk(FE_ERROR, 1, "INFO: Cut: 0x%02x probably incomplete support!", + state->internal->dev_ver); + } + + /* ADC1 range */ + reg = stv090x_read_reg(state, STV090x_TSTTNR1); + STV090x_SETFIELD(reg, ADC1_INMODE_FIELD, + (config->adc1_range == STV090x_ADC_1Vpp) ? 0 : 1); + if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0) + goto err; + + /* ADC2 range */ + reg = stv090x_read_reg(state, STV090x_TSTTNR3); + STV090x_SETFIELD(reg, ADC2_INMODE_FIELD, + (config->adc2_range == STV090x_ADC_1Vpp) ? 0 : 1); + if (stv090x_write_reg(state, STV090x_TSTTNR3, reg) < 0) + goto err; + + if (stv090x_write_reg(state, STV090x_TSTRES0, 0x80) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_TSTRES0, 0x00) < 0) + goto err; + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + +int stv090x_set_gpio(struct dvb_frontend *fe, u8 gpio, u8 dir, u8 value, + u8 xor_value) +{ + struct stv090x_state *state = fe->demodulator_priv; + u8 reg = 0; + + STV090x_SETFIELD(reg, GPIOx_OPD_FIELD, dir); + STV090x_SETFIELD(reg, GPIOx_CONFIG_FIELD, value); + STV090x_SETFIELD(reg, GPIOx_XOR_FIELD, xor_value); + + return stv090x_write_reg(state, STV090x_GPIOxCFG(gpio), reg); +} +EXPORT_SYMBOL(stv090x_set_gpio); + +static struct dvb_frontend_ops stv090x_ops = { + .delsys = { SYS_DVBS, SYS_DVBS2, SYS_DSS }, + .info = { + .name = "STV090x Multistandard", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 0, + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_2G_MODULATION + }, + + .release = stv090x_release, + .init = stv090x_init, + + .sleep = stv090x_sleep, + .get_frontend_algo = stv090x_frontend_algo, + + .diseqc_send_master_cmd = stv090x_send_diseqc_msg, + .diseqc_send_burst = stv090x_send_diseqc_burst, + .diseqc_recv_slave_reply = stv090x_recv_slave_reply, + .set_tone = stv090x_set_tone, + + .search = stv090x_search, + .read_status = stv090x_read_status, + .read_ber = stv090x_read_per, + .read_signal_strength = stv090x_read_signal_strength, + .read_snr = stv090x_read_cnr, +}; + + +struct dvb_frontend *stv090x_attach(const struct stv090x_config *config, + struct i2c_adapter *i2c, + enum stv090x_demodulator demod) +{ + struct stv090x_state *state = NULL; + struct stv090x_dev *temp_int; + + state = kzalloc(sizeof (struct stv090x_state), GFP_KERNEL); + if (state == NULL) + goto error; + + state->verbose = &verbose; + state->config = config; + state->i2c = i2c; + state->frontend.ops = stv090x_ops; + state->frontend.demodulator_priv = state; + state->demod = demod; + state->demod_mode = config->demod_mode; /* Single or Dual mode */ + state->device = config->device; + state->rolloff = STV090x_RO_35; /* default */ + + temp_int = find_dev(state->i2c, + state->config->address); + + if ((temp_int != NULL) && (state->demod_mode == STV090x_DUAL)) { + state->internal = temp_int->internal; + state->internal->num_used++; + dprintk(FE_INFO, 1, "Found Internal Structure!"); + } else { + state->internal = kmalloc(sizeof(struct stv090x_internal), + GFP_KERNEL); + if (!state->internal) + goto error; + temp_int = append_internal(state->internal); + if (!temp_int) { + kfree(state->internal); + goto error; + } + state->internal->num_used = 1; + state->internal->mclk = 0; + state->internal->dev_ver = 0; + state->internal->i2c_adap = state->i2c; + state->internal->i2c_addr = state->config->address; + dprintk(FE_INFO, 1, "Create New Internal Structure!"); + + mutex_init(&state->internal->demod_lock); + mutex_init(&state->internal->tuner_lock); + + if (stv090x_setup(&state->frontend) < 0) { + dprintk(FE_ERROR, 1, "Error setting up device"); + goto err_remove; + } + } + + if (state->internal->dev_ver >= 0x30) + state->frontend.ops.info.caps |= FE_CAN_MULTISTREAM; + + /* workaround for stuck DiSEqC output */ + if (config->diseqc_envelope_mode) + stv090x_send_diseqc_burst(&state->frontend, SEC_MINI_A); + + dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x", + state->device == STV0900 ? "STV0900" : "STV0903", + demod, + state->internal->dev_ver); + + return &state->frontend; + +err_remove: + remove_dev(state->internal); + kfree(state->internal); +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(stv090x_attach); +MODULE_PARM_DESC(verbose, "Set Verbosity level"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_DESCRIPTION("STV090x Multi-Std Broadcast frontend"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/stv090x.h b/drivers/media/dvb-frontends/stv090x.h new file mode 100644 index 00000000..0bd6adcf --- /dev/null +++ b/drivers/media/dvb-frontends/stv090x.h @@ -0,0 +1,134 @@ +/* + STV0900/0903 Multistandard Broadcast Frontend driver + Copyright (C) Manu Abraham + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STV090x_H +#define __STV090x_H + +enum stv090x_demodulator { + STV090x_DEMODULATOR_0 = 1, + STV090x_DEMODULATOR_1 +}; + +enum stv090x_device { + STV0903 = 0, + STV0900, +}; + +enum stv090x_mode { + STV090x_DUAL = 0, + STV090x_SINGLE +}; + +enum stv090x_tsmode { + STV090x_TSMODE_SERIAL_PUNCTURED = 1, + STV090x_TSMODE_SERIAL_CONTINUOUS, + STV090x_TSMODE_PARALLEL_PUNCTURED, + STV090x_TSMODE_DVBCI +}; + +enum stv090x_clkmode { + STV090x_CLK_INT = 0, /* Clk i/p = CLKI */ + STV090x_CLK_EXT = 2 /* Clk i/p = XTALI */ +}; + +enum stv090x_i2crpt { + STV090x_RPTLEVEL_256 = 0, + STV090x_RPTLEVEL_128 = 1, + STV090x_RPTLEVEL_64 = 2, + STV090x_RPTLEVEL_32 = 3, + STV090x_RPTLEVEL_16 = 4, + STV090x_RPTLEVEL_8 = 5, + STV090x_RPTLEVEL_4 = 6, + STV090x_RPTLEVEL_2 = 7, +}; + +enum stv090x_adc_range { + STV090x_ADC_2Vpp = 0, + STV090x_ADC_1Vpp = 1 +}; + +struct stv090x_config { + enum stv090x_device device; + enum stv090x_mode demod_mode; + enum stv090x_clkmode clk_mode; + + u32 xtal; /* default: 8000000 */ + u8 address; /* default: 0x68 */ + + u8 ts1_mode; + u8 ts2_mode; + u32 ts1_clk; + u32 ts2_clk; + + u8 ts1_tei : 1; + u8 ts2_tei : 1; + + enum stv090x_i2crpt repeater_level; + + u8 tuner_bbgain; /* default: 10db */ + enum stv090x_adc_range adc1_range; /* default: 2Vpp */ + enum stv090x_adc_range adc2_range; /* default: 2Vpp */ + + bool diseqc_envelope_mode; + + int (*tuner_init) (struct dvb_frontend *fe); + int (*tuner_sleep) (struct dvb_frontend *fe); + int (*tuner_set_mode) (struct dvb_frontend *fe, enum tuner_mode mode); + int (*tuner_set_frequency) (struct dvb_frontend *fe, u32 frequency); + int (*tuner_get_frequency) (struct dvb_frontend *fe, u32 *frequency); + int (*tuner_set_bandwidth) (struct dvb_frontend *fe, u32 bandwidth); + int (*tuner_get_bandwidth) (struct dvb_frontend *fe, u32 *bandwidth); + int (*tuner_set_bbgain) (struct dvb_frontend *fe, u32 gain); + int (*tuner_get_bbgain) (struct dvb_frontend *fe, u32 *gain); + int (*tuner_set_refclk) (struct dvb_frontend *fe, u32 refclk); + int (*tuner_get_status) (struct dvb_frontend *fe, u32 *status); + void (*tuner_i2c_lock) (struct dvb_frontend *fe, int lock); +}; + +#if IS_ENABLED(CONFIG_DVB_STV090x) + +extern struct dvb_frontend *stv090x_attach(const struct stv090x_config *config, + struct i2c_adapter *i2c, + enum stv090x_demodulator demod); + +/* dir = 0 -> output, dir = 1 -> input/open-drain */ +extern int stv090x_set_gpio(struct dvb_frontend *fe, u8 gpio, + u8 dir, u8 value, u8 xor_value); + +#else + +static inline struct dvb_frontend *stv090x_attach(const struct stv090x_config *config, + struct i2c_adapter *i2c, + enum stv090x_demodulator demod) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline int stv090x_set_gpio(struct dvb_frontend *fe, u8 gpio, + u8 opd, u8 value, u8 xor_value) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +#endif /* CONFIG_DVB_STV090x */ + +#endif /* __STV090x_H */ diff --git a/drivers/media/dvb-frontends/stv090x_priv.h b/drivers/media/dvb-frontends/stv090x_priv.h new file mode 100644 index 00000000..5b780c80 --- /dev/null +++ b/drivers/media/dvb-frontends/stv090x_priv.h @@ -0,0 +1,279 @@ +/* + STV0900/0903 Multistandard Broadcast Frontend driver + Copyright (C) Manu Abraham + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STV090x_PRIV_H +#define __STV090x_PRIV_H + +#include "dvb_frontend.h" + +#define FE_ERROR 0 +#define FE_NOTICE 1 +#define FE_INFO 2 +#define FE_DEBUG 3 +#define FE_DEBUGREG 4 + +#define dprintk(__y, __z, format, arg...) do { \ + if (__z) { \ + if ((verbose > FE_ERROR) && (verbose > __y)) \ + printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_NOTICE) && (verbose > __y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_INFO) && (verbose > __y)) \ + printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_DEBUG) && (verbose > __y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ + } else { \ + if (verbose > __y) \ + printk(format, ##arg); \ + } \ +} while (0) + +#define STV090x_READ_DEMOD(__state, __reg) (( \ + (__state)->demod == STV090x_DEMODULATOR_1) ? \ + stv090x_read_reg(__state, STV090x_P2_##__reg) : \ + stv090x_read_reg(__state, STV090x_P1_##__reg)) + +#define STV090x_WRITE_DEMOD(__state, __reg, __data) (( \ + (__state)->demod == STV090x_DEMODULATOR_1) ? \ + stv090x_write_reg(__state, STV090x_P2_##__reg, __data) :\ + stv090x_write_reg(__state, STV090x_P1_##__reg, __data)) + +#define STV090x_ADDR_OFFST(__state, __x) (( \ + (__state->demod) == STV090x_DEMODULATOR_1) ? \ + STV090x_P1_##__x : \ + STV090x_P2_##__x) + + +#define STV090x_SETFIELD(mask, bitf, val) (mask = (mask & (~(((1 << STV090x_WIDTH_##bitf) - 1) <<\ + STV090x_OFFST_##bitf))) | \ + (val << STV090x_OFFST_##bitf)) + +#define STV090x_GETFIELD(val, bitf) ((val >> STV090x_OFFST_##bitf) & ((1 << STV090x_WIDTH_##bitf) - 1)) + + +#define STV090x_SETFIELD_Px(mask, bitf, val) (mask = (mask & (~(((1 << STV090x_WIDTH_Px_##bitf) - 1) <<\ + STV090x_OFFST_Px_##bitf))) | \ + (val << STV090x_OFFST_Px_##bitf)) + +#define STV090x_GETFIELD_Px(val, bitf) ((val >> STV090x_OFFST_Px_##bitf) & ((1 << STV090x_WIDTH_Px_##bitf) - 1)) + +#define MAKEWORD16(__a, __b) (((__a) << 8) | (__b)) + +#define MSB(__x) ((__x >> 8) & 0xff) +#define LSB(__x) (__x & 0xff) + + +#define STV090x_IQPOWER_THRESHOLD 30 +#define STV090x_SEARCH_AGC2_TH_CUT20 700 +#define STV090x_SEARCH_AGC2_TH_CUT30 1400 + +#define STV090x_SEARCH_AGC2_TH(__ver) \ + ((__ver <= 0x20) ? \ + STV090x_SEARCH_AGC2_TH_CUT20 : \ + STV090x_SEARCH_AGC2_TH_CUT30) + +enum stv090x_signal_state { + STV090x_NOAGC1, + STV090x_NOCARRIER, + STV090x_NODATA, + STV090x_DATAOK, + STV090x_RANGEOK, + STV090x_OUTOFRANGE +}; + +enum stv090x_fec { + STV090x_PR12 = 0, + STV090x_PR23, + STV090x_PR34, + STV090x_PR45, + STV090x_PR56, + STV090x_PR67, + STV090x_PR78, + STV090x_PR89, + STV090x_PR910, + STV090x_PRERR +}; + +enum stv090x_modulation { + STV090x_QPSK, + STV090x_8PSK, + STV090x_16APSK, + STV090x_32APSK, + STV090x_UNKNOWN +}; + +enum stv090x_frame { + STV090x_LONG_FRAME, + STV090x_SHORT_FRAME +}; + +enum stv090x_pilot { + STV090x_PILOTS_OFF, + STV090x_PILOTS_ON +}; + +enum stv090x_rolloff { + STV090x_RO_35, + STV090x_RO_25, + STV090x_RO_20 +}; + +enum stv090x_inversion { + STV090x_IQ_AUTO, + STV090x_IQ_NORMAL, + STV090x_IQ_SWAP +}; + +enum stv090x_modcod { + STV090x_DUMMY_PLF = 0, + STV090x_QPSK_14, + STV090x_QPSK_13, + STV090x_QPSK_25, + STV090x_QPSK_12, + STV090x_QPSK_35, + STV090x_QPSK_23, + STV090x_QPSK_34, + STV090x_QPSK_45, + STV090x_QPSK_56, + STV090x_QPSK_89, + STV090x_QPSK_910, + STV090x_8PSK_35, + STV090x_8PSK_23, + STV090x_8PSK_34, + STV090x_8PSK_56, + STV090x_8PSK_89, + STV090x_8PSK_910, + STV090x_16APSK_23, + STV090x_16APSK_34, + STV090x_16APSK_45, + STV090x_16APSK_56, + STV090x_16APSK_89, + STV090x_16APSK_910, + STV090x_32APSK_34, + STV090x_32APSK_45, + STV090x_32APSK_56, + STV090x_32APSK_89, + STV090x_32APSK_910, + STV090x_MODCODE_UNKNOWN +}; + +enum stv090x_search { + STV090x_SEARCH_DSS = 0, + STV090x_SEARCH_DVBS1, + STV090x_SEARCH_DVBS2, + STV090x_SEARCH_AUTO +}; + +enum stv090x_algo { + STV090x_BLIND_SEARCH, + STV090x_COLD_SEARCH, + STV090x_WARM_SEARCH +}; + +enum stv090x_delsys { + STV090x_ERROR = 0, + STV090x_DVBS1 = 1, + STV090x_DVBS2, + STV090x_DSS +}; + +struct stv090x_long_frame_crloop { + enum stv090x_modcod modcod; + + u8 crl_pilots_on_2; + u8 crl_pilots_off_2; + u8 crl_pilots_on_5; + u8 crl_pilots_off_5; + u8 crl_pilots_on_10; + u8 crl_pilots_off_10; + u8 crl_pilots_on_20; + u8 crl_pilots_off_20; + u8 crl_pilots_on_30; + u8 crl_pilots_off_30; +}; + +struct stv090x_short_frame_crloop { + enum stv090x_modulation modulation; + + u8 crl_2; /* SR < 3M */ + u8 crl_5; /* 3 < SR <= 7M */ + u8 crl_10; /* 7 < SR <= 15M */ + u8 crl_20; /* 10 < SR <= 25M */ + u8 crl_30; /* 10 < SR <= 45M */ +}; + +struct stv090x_reg { + u16 addr; + u8 data; +}; + +struct stv090x_tab { + s32 real; + s32 read; +}; + +struct stv090x_internal { + struct i2c_adapter *i2c_adap; + u8 i2c_addr; + + struct mutex demod_lock; /* Lock access to shared register */ + struct mutex tuner_lock; /* Lock access to tuners */ + s32 mclk; /* Masterclock Divider factor */ + u32 dev_ver; + + int num_used; +}; + +struct stv090x_state { + enum stv090x_device device; + enum stv090x_demodulator demod; + enum stv090x_mode demod_mode; + struct stv090x_internal *internal; + + struct i2c_adapter *i2c; + const struct stv090x_config *config; + struct dvb_frontend frontend; + + u32 *verbose; /* Cached module verbosity */ + + enum stv090x_delsys delsys; + enum stv090x_fec fec; + enum stv090x_modulation modulation; + enum stv090x_modcod modcod; + enum stv090x_search search_mode; + enum stv090x_frame frame_len; + enum stv090x_pilot pilots; + enum stv090x_rolloff rolloff; + enum stv090x_inversion inversion; + enum stv090x_algo algo; + + u32 frequency; + u32 srate; + + s32 tuner_bw; + + s32 search_range; + + s32 DemodTimeout; + s32 FecTimeout; +}; + +#endif /* __STV090x_PRIV_H */ diff --git a/drivers/media/dvb-frontends/stv090x_reg.h b/drivers/media/dvb-frontends/stv090x_reg.h new file mode 100644 index 00000000..93741ee1 --- /dev/null +++ b/drivers/media/dvb-frontends/stv090x_reg.h @@ -0,0 +1,2371 @@ +/* + STV0900/0903 Multistandard Broadcast Frontend driver + Copyright (C) Manu Abraham + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STV090x_REG_H +#define __STV090x_REG_H + +#define STV090x_MID 0xf100 +#define STV090x_OFFST_MCHIP_IDENT_FIELD 4 +#define STV090x_WIDTH_MCHIP_IDENT_FIELD 4 +#define STV090x_OFFST_MRELEASE_FIELD 0 +#define STV090x_WIDTH_MRELEASE_FIELD 4 + +#define STV090x_DACR1 0xf113 +#define STV090x_OFFST_DACR1_MODE_FIELD 5 +#define STV090x_WIDTH_DACR1_MODE_FIELD 3 +#define STV090x_OFFST_DACR1_VALUE_FIELD 0 +#define STV090x_WIDTH_DACR1_VALUE_FIELD 4 + +#define STV090x_DACR2 0xf114 +#define STV090x_OFFST_DACR2_VALUE_FIELD 0 +#define STV090x_WIDTH_DACR2_VALUE_FIELD 8 + +#define STV090x_OUTCFG 0xf11c +#define STV090x_OFFST_OUTSERRS1_HZ_FIELD 6 +#define STV090x_WIDTH_OUTSERRS1_HZ_FIELD 1 +#define STV090x_OFFST_OUTSERRS2_HZ_FIELD 5 +#define STV090x_WIDTH_OUTSERRS2_HZ_FIELD 1 +#define STV090x_OFFST_OUTSERRS3_HZ_FIELD 4 +#define STV090x_WIDTH_OUTSERRS3_HZ_FIELD 1 +#define STV090x_OFFST_OUTPARRS3_HZ_FIELD 3 +#define STV090x_WIDTH_OUTPARRS3_HZ_FIELD 1 + +#define STV090x_MODECFG 0xf11d + +#define STV090x_IRQSTATUS3 0xf120 +#define STV090x_OFFST_SPLL_LOCK_FIELD 5 +#define STV090x_WIDTH_SPLL_LOCK_FIELD 1 +#define STV090x_OFFST_SSTREAM_LCK_3_FIELD 4 +#define STV090x_WIDTH_SSTREAM_LCK_3_FIELD 1 +#define STV090x_OFFST_SSTREAM_LCK_2_FIELD 3 +#define STV090x_WIDTH_SSTREAM_LCK_2_FIELD 1 +#define STV090x_OFFST_SSTREAM_LCK_1_FIELD 2 +#define STV090x_WIDTH_SSTREAM_LCK_1_FIELD 1 +#define STV090x_OFFST_SDVBS1_PRF_2_FIELD 1 +#define STV090x_WIDTH_SDVBS1_PRF_2_FIELD 1 +#define STV090x_OFFST_SDVBS1_PRF_1_FIELD 0 +#define STV090x_WIDTH_SDVBS1_PRF_1_FIELD 1 + +#define STV090x_IRQSTATUS2 0xf121 +#define STV090x_OFFST_SSPY_ENDSIM_3_FIELD 7 +#define STV090x_WIDTH_SSPY_ENDSIM_3_FIELD 1 +#define STV090x_OFFST_SSPY_ENDSIM_2_FIELD 6 +#define STV090x_WIDTH_SSPY_ENDSIM_2_FIELD 1 +#define STV090x_OFFST_SSPY_ENDSIM_1_FIELD 5 +#define STV090x_WIDTH_SSPY_ENDSIM_1_FIELD 1 +#define STV090x_OFFST_SPKTDEL_ERROR_2_FIELD 4 +#define STV090x_WIDTH_SPKTDEL_ERROR_2_FIELD 1 +#define STV090x_OFFST_SPKTDEL_LOCKB_2_FIELD 3 +#define STV090x_WIDTH_SPKTDEL_LOCKB_2_FIELD 1 +#define STV090x_OFFST_SPKTDEL_LOCK_2_FIELD 2 +#define STV090x_WIDTH_SPKTDEL_LOCK_2_FIELD 1 +#define STV090x_OFFST_SPKTDEL_ERROR_1_FIELD 1 +#define STV090x_WIDTH_SPKTDEL_ERROR_1_FIELD 1 +#define STV090x_OFFST_SPKTDEL_LOCKB_1_FIELD 0 +#define STV090x_WIDTH_SPKTDEL_LOCKB_1_FIELD 1 + +#define STV090x_IRQSTATUS1 0xf122 +#define STV090x_OFFST_SPKTDEL_LOCK_1_FIELD 7 +#define STV090x_WIDTH_SPKTDEL_LOCK_1_FIELD 1 +#define STV090x_OFFST_SDEMOD_LOCKB_2_FIELD 2 +#define STV090x_WIDTH_SDEMOD_LOCKB_2_FIELD 1 +#define STV090x_OFFST_SDEMOD_LOCK_2_FIELD 1 +#define STV090x_WIDTH_SDEMOD_LOCK_2_FIELD 1 +#define STV090x_OFFST_SDEMOD_IRQ_2_FIELD 0 +#define STV090x_WIDTH_SDEMOD_IRQ_2_FIELD 1 + +#define STV090x_IRQSTATUS0 0xf123 +#define STV090x_OFFST_SDEMOD_LOCKB_1_FIELD 7 +#define STV090x_WIDTH_SDEMOD_LOCKB_1_FIELD 1 +#define STV090x_OFFST_SDEMOD_LOCK_1_FIELD 6 +#define STV090x_WIDTH_SDEMOD_LOCK_1_FIELD 1 +#define STV090x_OFFST_SDEMOD_IRQ_1_FIELD 5 +#define STV090x_WIDTH_SDEMOD_IRQ_1_FIELD 1 +#define STV090x_OFFST_SBCH_ERRFLAG_FIELD 4 +#define STV090x_WIDTH_SBCH_ERRFLAG_FIELD 1 +#define STV090x_OFFST_SDISEQC2RX_IRQ_FIELD 3 +#define STV090x_WIDTH_SDISEQC2RX_IRQ_FIELD 1 +#define STV090x_OFFST_SDISEQC2TX_IRQ_FIELD 2 +#define STV090x_WIDTH_SDISEQC2TX_IRQ_FIELD 1 +#define STV090x_OFFST_SDISEQC1RX_IRQ_FIELD 1 +#define STV090x_WIDTH_SDISEQC1RX_IRQ_FIELD 1 +#define STV090x_OFFST_SDISEQC1TX_IRQ_FIELD 0 +#define STV090x_WIDTH_SDISEQC1TX_IRQ_FIELD 1 + +#define STV090x_IRQMASK3 0xf124 +#define STV090x_OFFST_MPLL_LOCK_FIELD 5 +#define STV090x_WIDTH_MPLL_LOCK_FIELD 1 +#define STV090x_OFFST_MSTREAM_LCK_3_FIELD 4 +#define STV090x_WIDTH_MSTREAM_LCK_3_FIELD 1 +#define STV090x_OFFST_MSTREAM_LCK_2_FIELD 3 +#define STV090x_WIDTH_MSTREAM_LCK_2_FIELD 1 +#define STV090x_OFFST_MSTREAM_LCK_1_FIELD 2 +#define STV090x_WIDTH_MSTREAM_LCK_1_FIELD 1 +#define STV090x_OFFST_MDVBS1_PRF_2_FIELD 1 +#define STV090x_WIDTH_MDVBS1_PRF_2_FIELD 1 +#define STV090x_OFFST_MDVBS1_PRF_1_FIELD 0 +#define STV090x_WIDTH_MDVBS1_PRF_1_FIELD 1 + +#define STV090x_IRQMASK2 0xf125 +#define STV090x_OFFST_MSPY_ENDSIM_3_FIELD 7 +#define STV090x_WIDTH_MSPY_ENDSIM_3_FIELD 1 +#define STV090x_OFFST_MSPY_ENDSIM_2_FIELD 6 +#define STV090x_WIDTH_MSPY_ENDSIM_2_FIELD 1 +#define STV090x_OFFST_MSPY_ENDSIM_1_FIELD 5 +#define STV090x_WIDTH_MSPY_ENDSIM_1_FIELD 1 +#define STV090x_OFFST_MPKTDEL_ERROR_2_FIELD 4 +#define STV090x_WIDTH_MPKTDEL_ERROR_2_FIELD 1 +#define STV090x_OFFST_MPKTDEL_LOCKB_2_FIELD 3 +#define STV090x_WIDTH_MPKTDEL_LOCKB_2_FIELD 1 +#define STV090x_OFFST_MPKTDEL_LOCK_2_FIELD 2 +#define STV090x_WIDTH_MPKTDEL_LOCK_2_FIELD 1 +#define STV090x_OFFST_MPKTDEL_ERROR_1_FIELD 1 +#define STV090x_WIDTH_MPKTDEL_ERROR_1_FIELD 1 +#define STV090x_OFFST_MPKTDEL_LOCKB_1_FIELD 0 +#define STV090x_WIDTH_MPKTDEL_LOCKB_1_FIELD 1 + +#define STV090x_IRQMASK1 0xf126 +#define STV090x_OFFST_MPKTDEL_LOCK_1_FIELD 7 +#define STV090x_WIDTH_MPKTDEL_LOCK_1_FIELD 1 +#define STV090x_OFFST_MEXTPINB2_FIELD 6 +#define STV090x_WIDTH_MEXTPINB2_FIELD 1 +#define STV090x_OFFST_MEXTPIN2_FIELD 5 +#define STV090x_WIDTH_MEXTPIN2_FIELD 1 +#define STV090x_OFFST_MEXTPINB1_FIELD 4 +#define STV090x_WIDTH_MEXTPINB1_FIELD 1 +#define STV090x_OFFST_MEXTPIN1_FIELD 3 +#define STV090x_WIDTH_MEXTPIN1_FIELD 1 +#define STV090x_OFFST_MDEMOD_LOCKB_2_FIELD 2 +#define STV090x_WIDTH_MDEMOD_LOCKB_2_FIELD 1 +#define STV090x_OFFST_MDEMOD_LOCK_2_FIELD 1 +#define STV090x_WIDTH_MDEMOD_LOCK_2_FIELD 1 +#define STV090x_OFFST_MDEMOD_IRQ_2_FIELD 0 +#define STV090x_WIDTH_MDEMOD_IRQ_2_FIELD 1 + +#define STV090x_IRQMASK0 0xf127 +#define STV090x_OFFST_MDEMOD_LOCKB_1_FIELD 7 +#define STV090x_WIDTH_MDEMOD_LOCKB_1_FIELD 1 +#define STV090x_OFFST_MDEMOD_LOCK_1_FIELD 6 +#define STV090x_WIDTH_MDEMOD_LOCK_1_FIELD 1 +#define STV090x_OFFST_MDEMOD_IRQ_1_FIELD 5 +#define STV090x_WIDTH_MDEMOD_IRQ_1_FIELD 1 +#define STV090x_OFFST_MBCH_ERRFLAG_FIELD 4 +#define STV090x_WIDTH_MBCH_ERRFLAG_FIELD 1 +#define STV090x_OFFST_MDISEQC2RX_IRQ_FIELD 3 +#define STV090x_WIDTH_MDISEQC2RX_IRQ_FIELD 1 +#define STV090x_OFFST_MDISEQC2TX_IRQ_FIELD 2 +#define STV090x_WIDTH_MDISEQC2TX_IRQ_FIELD 1 +#define STV090x_OFFST_MDISEQC1RX_IRQ_FIELD 1 +#define STV090x_WIDTH_MDISEQC1RX_IRQ_FIELD 1 +#define STV090x_OFFST_MDISEQC1TX_IRQ_FIELD 0 +#define STV090x_WIDTH_MDISEQC1TX_IRQ_FIELD 1 + +#define STV090x_I2CCFG 0xf129 +#define STV090x_OFFST_12C_FASTMODE_FIELD 3 +#define STV090x_WIDTH_12C_FASTMODE_FIELD 1 +#define STV090x_OFFST_12CADDR_INC_FIELD 0 +#define STV090x_WIDTH_12CADDR_INC_FIELD 2 + +#define STV090x_Px_I2CRPT(__x) (0xf12a + (__x - 1) * 0x1) +#define STV090x_P1_I2CRPT STV090x_Px_I2CRPT(1) +#define STV090x_P2_I2CRPT STV090x_Px_I2CRPT(2) +#define STV090x_OFFST_Px_I2CT_ON_FIELD 7 +#define STV090x_WIDTH_Px_I2CT_ON_FIELD 1 +#define STV090x_OFFST_Px_ENARPT_LEVEL_FIELD 4 +#define STV090x_WIDTH_Px_ENARPT_LEVEL_FIELD 3 +#define STV090x_OFFST_Px_SCLT_DELAY_FIELD 3 +#define STV090x_WIDTH_Px_SCLT_DELAY_FIELD 1 +#define STV090x_OFFST_Px_STOP_ENABLE_FIELD 2 +#define STV090x_WIDTH_Px_STOP_ENABLE_FIELD 1 +#define STV090x_OFFST_Px_STOP_SDAT2SDA_FIELD 1 +#define STV090x_WIDTH_Px_STOP_SDAT2SDA_FIELD 1 + +#define STV090x_CLKI2CFG 0xf140 +#define STV090x_OFFST_CLKI2_OPD_FIELD 7 +#define STV090x_WIDTH_CLKI2_OPD_FIELD 1 +#define STV090x_OFFST_CLKI2_CONFIG_FIELD 1 +#define STV090x_WIDTH_CLKI2_CONFIG_FIELD 6 +#define STV090x_OFFST_CLKI2_XOR_FIELD 0 +#define STV090x_WIDTH_CLKI2_XOR_FIELD 1 + +#define STV090x_GPIOxCFG(__x) (0xf141 + (__x - 1)) +#define STV090x_GPIO1CFG STV090x_GPIOxCFG(1) +#define STV090x_GPIO2CFG STV090x_GPIOxCFG(2) +#define STV090x_GPIO3CFG STV090x_GPIOxCFG(3) +#define STV090x_GPIO4CFG STV090x_GPIOxCFG(4) +#define STV090x_GPIO5CFG STV090x_GPIOxCFG(5) +#define STV090x_GPIO6CFG STV090x_GPIOxCFG(6) +#define STV090x_GPIO7CFG STV090x_GPIOxCFG(7) +#define STV090x_GPIO8CFG STV090x_GPIOxCFG(8) +#define STV090x_GPIO9CFG STV090x_GPIOxCFG(9) +#define STV090x_GPIO10CFG STV090x_GPIOxCFG(10) +#define STV090x_GPIO11CFG STV090x_GPIOxCFG(11) +#define STV090x_GPIO12CFG STV090x_GPIOxCFG(12) +#define STV090x_GPIO13CFG STV090x_GPIOxCFG(13) +#define STV090x_OFFST_GPIOx_OPD_FIELD 7 +#define STV090x_WIDTH_GPIOx_OPD_FIELD 1 +#define STV090x_OFFST_GPIOx_CONFIG_FIELD 1 +#define STV090x_WIDTH_GPIOx_CONFIG_FIELD 6 +#define STV090x_OFFST_GPIOx_XOR_FIELD 0 +#define STV090x_WIDTH_GPIOx_XOR_FIELD 1 + +#define STV090x_CSxCFG(__x) (0xf14e + __x * 0x1) +#define STV090x_CS0CFG STV090x_CSxCFG(0) +#define STV090x_CS1CFG STV090x_CSxCFG(1) +#define STV090x_OFFST_CSX_OPD_FIELD 7 +#define STV090x_WIDTH_CSX_OPD_FIELD 1 +#define STV090x_OFFST_CSX_CONFIG_FIELD 1 +#define STV090x_WIDTH_CSX_CONFIG_FIELD 6 +#define STV090x_OFFST_CSX_XOR_FIELD 0 +#define STV090x_WIDTH_CSX_XOR_FIELD 1 + + +#define STV090x_STDBYCFG 0xf150 +#define STV090x_OFFST_STDBY_OPD_FIELD 7 +#define STV090x_WIDTH_STDBY_OPD_FIELD 1 +#define STV090x_OFFST_STDBY_CONFIG_FIELD 1 +#define STV090x_WIDTH_STDBY_CONFIG_FIELD 6 +#define STV090x_OFFST_STDBY_XOR_FIELD 0 +#define STV090x_WIDTH_STDBY_XOR_FIELD 1 + +#define STV090x_DIRCLKCFG 0xf151 +#define STV090x_OFFST_DIRCLK_OPD_FIELD 7 +#define STV090x_WIDTH_DIRCLK_OPD_FIELD 1 +#define STV090x_OFFST_DIRCLK_CONFIG_FIELD 1 +#define STV090x_WIDTH_DIRCLK_CONFIG_FIELD 6 +#define STV090x_OFFST_DIRCLK_XOR_FIELD 0 +#define STV090x_WIDTH_DIRCLK_XOR_FIELD 1 + + +#define STV090x_AGCRFxCFG(__x) (0xf152 + (__x - 1) * 0x4) +#define STV090x_AGCRF1CFG STV090x_AGCRFxCFG(1) +#define STV090x_AGCRF2CFG STV090x_AGCRFxCFG(2) +#define STV090x_OFFST_AGCRFx_OPD_FIELD 7 +#define STV090x_WIDTH_AGCRFx_OPD_FIELD 1 +#define STV090x_OFFST_AGCRFx_CONFIG_FIELD 1 +#define STV090x_WIDTH_AGCRFx_CONFIG_FIELD 6 +#define STV090x_OFFST_AGCRFx_XOR_FIELD 0 +#define STV090x_WIDTH_AGCRFx_XOR_FIELD 1 + +#define STV090x_SDATxCFG(__x) (0xf153 + (__x - 1) * 0x4) +#define STV090x_SDAT1CFG STV090x_SDATxCFG(1) +#define STV090x_SDAT2CFG STV090x_SDATxCFG(2) +#define STV090x_OFFST_SDATx_OPD_FIELD 7 +#define STV090x_WIDTH_SDATx_OPD_FIELD 1 +#define STV090x_OFFST_SDATx_CONFIG_FIELD 1 +#define STV090x_WIDTH_SDATx_CONFIG_FIELD 6 +#define STV090x_OFFST_SDATx_XOR_FIELD 0 +#define STV090x_WIDTH_SDATx_XOR_FIELD 1 + +#define STV090x_SCLTxCFG(__x) (0xf154 + (__x - 1) * 0x4) +#define STV090x_SCLT1CFG STV090x_SCLTxCFG(1) +#define STV090x_SCLT2CFG STV090x_SCLTxCFG(2) +#define STV090x_OFFST_SCLTx_OPD_FIELD 7 +#define STV090x_WIDTH_SCLTx_OPD_FIELD 1 +#define STV090x_OFFST_SCLTx_CONFIG_FIELD 1 +#define STV090x_WIDTH_SCLTx_CONFIG_FIELD 6 +#define STV090x_OFFST_SCLTx_XOR_FIELD 0 +#define STV090x_WIDTH_SCLTx_XOR_FIELD 1 + +#define STV090x_DISEQCOxCFG(__x) (0xf155 + (__x - 1) * 0x4) +#define STV090x_DISEQCO1CFG STV090x_DISEQCOxCFG(1) +#define STV090x_DISEQCO2CFG STV090x_DISEQCOxCFG(2) +#define STV090x_OFFST_DISEQCOx_OPD_FIELD 7 +#define STV090x_WIDTH_DISEQCOx_OPD_FIELD 1 +#define STV090x_OFFST_DISEQCOx_CONFIG_FIELD 1 +#define STV090x_WIDTH_DISEQCOx_CONFIG_FIELD 6 +#define STV090x_OFFST_DISEQCOx_XOR_FIELD 0 +#define STV090x_WIDTH_DISEQCOx_XOR_FIELD 1 + +#define STV090x_CLKOUT27CFG 0xf15a +#define STV090x_OFFST_CLKOUT27_OPD_FIELD 7 +#define STV090x_WIDTH_CLKOUT27_OPD_FIELD 1 +#define STV090x_OFFST_CLKOUT27_CONFIG_FIELD 1 +#define STV090x_WIDTH_CLKOUT27_CONFIG_FIELD 6 +#define STV090x_OFFST_CLKOUT27_XOR_FIELD 0 +#define STV090x_WIDTH_CLKOUT27_XOR_FIELD 1 + +#define STV090x_ERRORxCFG(__x) (0xf15b + (__x - 1) * 0x5) +#define STV090x_ERROR1CFG STV090x_ERRORxCFG(1) +#define STV090x_ERROR2CFG STV090x_ERRORxCFG(2) +#define STV090x_ERROR3CFG STV090x_ERRORxCFG(3) +#define STV090x_OFFST_ERRORx_OPD_FIELD 7 +#define STV090x_WIDTH_ERRORx_OPD_FIELD 1 +#define STV090x_OFFST_ERRORx_CONFIG_FIELD 1 +#define STV090x_WIDTH_ERRORx_CONFIG_FIELD 6 +#define STV090x_OFFST_ERRORx_XOR_FIELD 0 +#define STV090x_WIDTH_ERRORx_XOR_FIELD 1 + +#define STV090x_DPNxCFG(__x) (0xf15c + (__x - 1) * 0x5) +#define STV090x_DPN1CFG STV090x_DPNxCFG(1) +#define STV090x_DPN2CFG STV090x_DPNxCFG(2) +#define STV090x_DPN3CFG STV090x_DPNxCFG(3) +#define STV090x_OFFST_DPNx_OPD_FIELD 7 +#define STV090x_WIDTH_DPNx_OPD_FIELD 1 +#define STV090x_OFFST_DPNx_CONFIG_FIELD 1 +#define STV090x_WIDTH_DPNx_CONFIG_FIELD 6 +#define STV090x_OFFST_DPNx_XOR_FIELD 0 +#define STV090x_WIDTH_DPNx_XOR_FIELD 1 + +#define STV090x_STROUTxCFG(__x) (0xf15d + (__x - 1) * 0x5) +#define STV090x_STROUT1CFG STV090x_STROUTxCFG(1) +#define STV090x_STROUT2CFG STV090x_STROUTxCFG(2) +#define STV090x_STROUT3CFG STV090x_STROUTxCFG(3) +#define STV090x_OFFST_STROUTx_OPD_FIELD 7 +#define STV090x_WIDTH_STROUTx_OPD_FIELD 1 +#define STV090x_OFFST_STROUTx_CONFIG_FIELD 1 +#define STV090x_WIDTH_STROUTx_CONFIG_FIELD 6 +#define STV090x_OFFST_STROUTx_XOR_FIELD 0 +#define STV090x_WIDTH_STROUTx_XOR_FIELD 1 + +#define STV090x_CLKOUTxCFG(__x) (0xf15e + (__x - 1) * 0x5) +#define STV090x_CLKOUT1CFG STV090x_CLKOUTxCFG(1) +#define STV090x_CLKOUT2CFG STV090x_CLKOUTxCFG(2) +#define STV090x_CLKOUT3CFG STV090x_CLKOUTxCFG(3) +#define STV090x_OFFST_CLKOUTx_OPD_FIELD 7 +#define STV090x_WIDTH_CLKOUTx_OPD_FIELD 1 +#define STV090x_OFFST_CLKOUTx_CONFIG_FIELD 1 +#define STV090x_WIDTH_CLKOUTx_CONFIG_FIELD 6 +#define STV090x_OFFST_CLKOUTx_XOR_FIELD 0 +#define STV090x_WIDTH_CLKOUTx_XOR_FIELD 1 + +#define STV090x_DATAxCFG(__x) (0xf15f + (__x - 71) * 0x5) +#define STV090x_DATA71CFG STV090x_DATAxCFG(71) +#define STV090x_DATA72CFG STV090x_DATAxCFG(72) +#define STV090x_DATA73CFG STV090x_DATAxCFG(73) +#define STV090x_OFFST_DATAx_OPD_FIELD 7 +#define STV090x_WIDTH_DATAx_OPD_FIELD 1 +#define STV090x_OFFST_DATAx_CONFIG_FIELD 1 +#define STV090x_WIDTH_DATAx_CONFIG_FIELD 6 +#define STV090x_OFFST_DATAx_XOR_FIELD 0 +#define STV090x_WIDTH_DATAx_XOR_FIELD 1 + +#define STV090x_NCOARSE 0xf1b3 +#define STV090x_OFFST_M_DIV_FIELD 0 +#define STV090x_WIDTH_M_DIV_FIELD 8 + +#define STV090x_SYNTCTRL 0xf1b6 +#define STV090x_OFFST_STANDBY_FIELD 7 +#define STV090x_WIDTH_STANDBY_FIELD 1 +#define STV090x_OFFST_BYPASSPLLCORE_FIELD 6 +#define STV090x_WIDTH_BYPASSPLLCORE_FIELD 1 +#define STV090x_OFFST_SELX1RATIO_FIELD 5 +#define STV090x_WIDTH_SELX1RATIO_FIELD 1 +#define STV090x_OFFST_STOP_PLL_FIELD 3 +#define STV090x_WIDTH_STOP_PLL_FIELD 1 +#define STV090x_OFFST_BYPASSPLLFSK_FIELD 2 +#define STV090x_WIDTH_BYPASSPLLFSK_FIELD 1 +#define STV090x_OFFST_SELOSCI_FIELD 1 +#define STV090x_WIDTH_SELOSCI_FIELD 1 +#define STV090x_OFFST_BYPASSPLLADC_FIELD 0 +#define STV090x_WIDTH_BYPASSPLLADC_FIELD 1 + +#define STV090x_FILTCTRL 0xf1b7 +#define STV090x_OFFST_INV_CLK135_FIELD 7 +#define STV090x_WIDTH_INV_CLK135_FIELD 1 +#define STV090x_OFFST_SEL_FSKCKDIV_FIELD 2 +#define STV090x_WIDTH_SEL_FSKCKDIV_FIELD 1 +#define STV090x_OFFST_INV_CLKFSK_FIELD 1 +#define STV090x_WIDTH_INV_CLKFSK_FIELD 1 +#define STV090x_OFFST_BYPASS_APPLI_FIELD 0 +#define STV090x_WIDTH_BYPASS_APPLI_FIELD 1 + +#define STV090x_PLLSTAT 0xf1b8 +#define STV090x_OFFST_PLLLOCK_FIELD 0 +#define STV090x_WIDTH_PLLLOCK_FIELD 1 + +#define STV090x_STOPCLK1 0xf1c2 +#define STV090x_OFFST_STOP_CLKPKDT2_FIELD 6 +#define STV090x_WIDTH_STOP_CLKPKDT2_FIELD 1 +#define STV090x_OFFST_STOP_CLKPKDT1_FIELD 5 +#define STV090x_WIDTH_STOP_CLKPKDT1_FIELD 1 +#define STV090x_OFFST_STOP_CLKFEC_FIELD 4 +#define STV090x_WIDTH_STOP_CLKFEC_FIELD 1 +#define STV090x_OFFST_STOP_CLKADCI2_FIELD 3 +#define STV090x_WIDTH_STOP_CLKADCI2_FIELD 1 +#define STV090x_OFFST_INV_CLKADCI2_FIELD 2 +#define STV090x_WIDTH_INV_CLKADCI2_FIELD 1 +#define STV090x_OFFST_STOP_CLKADCI1_FIELD 1 +#define STV090x_WIDTH_STOP_CLKADCI1_FIELD 1 +#define STV090x_OFFST_INV_CLKADCI1_FIELD 0 +#define STV090x_WIDTH_INV_CLKADCI1_FIELD 1 + +#define STV090x_STOPCLK2 0xf1c3 +#define STV090x_OFFST_STOP_CLKSAMP2_FIELD 4 +#define STV090x_WIDTH_STOP_CLKSAMP2_FIELD 1 +#define STV090x_OFFST_STOP_CLKSAMP1_FIELD 3 +#define STV090x_WIDTH_STOP_CLKSAMP1_FIELD 1 +#define STV090x_OFFST_STOP_CLKVIT2_FIELD 2 +#define STV090x_WIDTH_STOP_CLKVIT2_FIELD 1 +#define STV090x_OFFST_STOP_CLKVIT1_FIELD 1 +#define STV090x_WIDTH_STOP_CLKVIT1_FIELD 1 +#define STV090x_OFFST_STOP_CLKTS_FIELD 0 +#define STV090x_WIDTH_STOP_CLKTS_FIELD 1 + +#define STV090x_TSTTNR0 0xf1df +#define STV090x_OFFST_SEL_FSK_FIELD 7 +#define STV090x_WIDTH_SEL_FSK_FIELD 1 +#define STV090x_OFFST_FSK_PON_FIELD 2 +#define STV090x_WIDTH_FSK_PON_FIELD 1 + +#define STV090x_TSTTNR1 0xf1e0 +#define STV090x_OFFST_ADC1_PON_FIELD 1 +#define STV090x_WIDTH_ADC1_PON_FIELD 1 +#define STV090x_OFFST_ADC1_INMODE_FIELD 0 +#define STV090x_WIDTH_ADC1_INMODE_FIELD 1 + +#define STV090x_TSTTNR2 0xf1e1 +#define STV090x_OFFST_DISEQC1_PON_FIELD 5 +#define STV090x_WIDTH_DISEQC1_PON_FIELD 1 + +#define STV090x_TSTTNR3 0xf1e2 +#define STV090x_OFFST_ADC2_PON_FIELD 1 +#define STV090x_WIDTH_ADC2_PON_FIELD 1 +#define STV090x_OFFST_ADC2_INMODE_FIELD 0 +#define STV090x_WIDTH_ADC2_INMODE_FIELD 1 + +#define STV090x_TSTTNR4 0xf1e3 +#define STV090x_OFFST_DISEQC2_PON_FIELD 5 +#define STV090x_WIDTH_DISEQC2_PON_FIELD 1 + +#define STV090x_FSKTFC2 0xf170 +#define STV090x_OFFST_FSKT_KMOD_FIELD 2 +#define STV090x_WIDTH_FSKT_KMOD_FIELD 6 +#define STV090x_OFFST_FSKT_CAR_FIELD 0 +#define STV090x_WIDTH_FSKT_CAR_FIELD 2 + +#define STV090x_FSKTFC1 0xf171 +#define STV090x_OFFST_FSKTC1_CAR_FIELD 0 +#define STV090x_WIDTH_FSKTC1_CAR_FIELD 8 + +#define STV090x_FSKTFC0 0xf172 +#define STV090x_OFFST_FSKTC0_CAR_FIELD 0 +#define STV090x_WIDTH_FSKTC0_CAR_FIELD 8 + +#define STV090x_FSKTDELTAF1 0xf173 +#define STV090x_OFFST_FSKTF1_DELTAF_FIELD 0 +#define STV090x_WIDTH_FSKTF1_DELTAF_FIELD 4 + +#define STV090x_FSKTDELTAF0 0xf174 +#define STV090x_OFFST_FSKTF0_DELTAF_FIELD 0 +#define STV090x_WIDTH_FSKTF0_DELTAF_FIELD 8 + +#define STV090x_FSKTCTRL 0xf175 +#define STV090x_OFFST_FSKT_EN_SGN_FIELD 6 +#define STV090x_WIDTH_FSKT_EN_SGN_FIELD 1 +#define STV090x_OFFST_FSKT_MOD_SGN_FIELD 5 +#define STV090x_WIDTH_FSKT_MOD_SGN_FIELD 1 +#define STV090x_OFFST_FSKT_MOD_EN_FIELD 2 +#define STV090x_WIDTH_FSKT_MOD_EN_FIELD 3 +#define STV090x_OFFST_FSKT_DACMODE_FIELD 0 +#define STV090x_WIDTH_FSKT_DACMODE_FIELD 2 + +#define STV090x_FSKRFC2 0xf176 +#define STV090x_OFFST_FSKRC2_DETSGN_FIELD 6 +#define STV090x_WIDTH_FSKRC2_DETSGN_FIELD 1 +#define STV090x_OFFST_FSKRC2_OUTSGN_FIELD 5 +#define STV090x_WIDTH_FSKRC2_OUTSGN_FIELD 1 +#define STV090x_OFFST_FSKRC2_KAGC_FIELD 2 +#define STV090x_WIDTH_FSKRC2_KAGC_FIELD 3 +#define STV090x_OFFST_FSKRC2_CAR_FIELD 0 +#define STV090x_WIDTH_FSKRC2_CAR_FIELD 2 + +#define STV090x_FSKRFC1 0xf177 +#define STV090x_OFFST_FSKRC1_CAR_FIELD 0 +#define STV090x_WIDTH_FSKRC1_CAR_FIELD 8 + +#define STV090x_FSKRFC0 0xf178 +#define STV090x_OFFST_FSKRC0_CAR_FIELD 0 +#define STV090x_WIDTH_FSKRC0_CAR_FIELD 8 + +#define STV090x_FSKRK1 0xf179 +#define STV090x_OFFST_FSKR_K1_EXP_FIELD 5 +#define STV090x_WIDTH_FSKR_K1_EXP_FIELD 3 +#define STV090x_OFFST_FSKR_K1_MANT_FIELD 0 +#define STV090x_WIDTH_FSKR_K1_MANT_FIELD 5 + +#define STV090x_FSKRK2 0xf17a +#define STV090x_OFFST_FSKR_K2_EXP_FIELD 5 +#define STV090x_WIDTH_FSKR_K2_EXP_FIELD 3 +#define STV090x_OFFST_FSKR_K2_MANT_FIELD 0 +#define STV090x_WIDTH_FSKR_K2_MANT_FIELD 5 + +#define STV090x_FSKRAGCR 0xf17b +#define STV090x_OFFST_FSKR_OUTCTL_FIELD 6 +#define STV090x_WIDTH_FSKR_OUTCTL_FIELD 2 +#define STV090x_OFFST_FSKR_AGC_REF_FIELD 0 +#define STV090x_WIDTH_FSKR_AGC_REF_FIELD 6 + +#define STV090x_FSKRAGC 0xf17c +#define STV090x_OFFST_FSKR_AGC_ACCU_FIELD 0 +#define STV090x_WIDTH_FSKR_AGC_ACCU_FIELD 8 + +#define STV090x_FSKRALPHA 0xf17d +#define STV090x_OFFST_FSKR_ALPHA_EXP_FIELD 2 +#define STV090x_WIDTH_FSKR_ALPHA_EXP_FIELD 3 +#define STV090x_OFFST_FSKR_ALPHA_M_FIELD 0 +#define STV090x_WIDTH_FSKR_ALPHA_M_FIELD 2 + +#define STV090x_FSKRPLTH1 0xf17e +#define STV090x_OFFST_FSKR_BETA_FIELD 4 +#define STV090x_WIDTH_FSKR_BETA_FIELD 4 +#define STV090x_OFFST_FSKR_PLL_TRESH1_FIELD 0 +#define STV090x_WIDTH_FSKR_PLL_TRESH1_FIELD 4 + +#define STV090x_FSKRPLTH0 0xf17f +#define STV090x_OFFST_FSKR_PLL_TRESH0_FIELD 0 +#define STV090x_WIDTH_FSKR_PLL_TRESH0_FIELD 8 + +#define STV090x_FSKRDF1 0xf180 +#define STV090x_OFFST_FSKR_DELTAF1_FIELD 0 +#define STV090x_WIDTH_FSKR_DELTAF1_FIELD 5 + +#define STV090x_FSKRDF0 0xf181 +#define STV090x_OFFST_FSKR_DELTAF0_FIELD 0 +#define STV090x_WIDTH_FSKR_DELTAF0_FIELD 8 + +#define STV090x_FSKRSTEPP 0xf182 +#define STV090x_OFFST_FSKR_STEP_PLUS_FIELD 0 +#define STV090x_WIDTH_FSKR_STEP_PLUS_FIELD 8 + +#define STV090x_FSKRSTEPM 0xf183 +#define STV090x_OFFST_FSKR_STEP_MINUS_FIELD 0 +#define STV090x_WIDTH_FSKR_STEP_MINUS_FIELD 8 + +#define STV090x_FSKRDET1 0xf184 +#define STV090x_OFFST_FSKR_CARDET1_ACCU_FIELD 0 +#define STV090x_WIDTH_FSKR_CARDET1_ACCU_FIELD 4 + +#define STV090x_FSKRDET0 0xf185 +#define STV090x_OFFST_FSKR_CARDET0_ACCU_FIELD 0 +#define STV090x_WIDTH_FSKR_CARDET0_ACCU_FIELD 8 + +#define STV090x_FSKRDTH1 0xf186 +#define STV090x_OFFST_FSKR_CARLOSS_THRESH1_FIELD 4 +#define STV090x_WIDTH_FSKR_CARLOSS_THRESH1_FIELD 4 +#define STV090x_OFFST_FSKR_CARDET_THRESH1_FIELD 0 +#define STV090x_WIDTH_FSKR_CARDET_THRESH1_FIELD 4 + +#define STV090x_FSKRDTH0 0xf187 +#define STV090x_OFFST_FSKR_CARDET_THRESH0_FIELD 0 +#define STV090x_WIDTH_FSKR_CARDET_THRESH0_FIELD 8 + +#define STV090x_FSKRLOSS 0xf188 +#define STV090x_OFFST_FSKR_CARLOSS_THRESH_FIELD 0 +#define STV090x_WIDTH_FSKR_CARLOSS_THRESH_FIELD 8 + +#define STV090x_Px_DISTXCTL(__x) (0xF1A0 - (__x - 1) * 0x10) +#define STV090x_P1_DISTXCTL STV090x_Px_DISTXCTL(1) +#define STV090x_P2_DISTXCTL STV090x_Px_DISTXCTL(2) +#define STV090x_OFFST_Px_TIM_OFF_FIELD 7 +#define STV090x_WIDTH_Px_TIM_OFF_FIELD 1 +#define STV090x_OFFST_Px_DISEQC_RESET_FIELD 6 +#define STV090x_WIDTH_Px_DISEQC_RESET_FIELD 1 +#define STV090x_OFFST_Px_TIM_CMD_FIELD 4 +#define STV090x_WIDTH_Px_TIM_CMD_FIELD 2 +#define STV090x_OFFST_Px_DIS_PRECHARGE_FIELD 3 +#define STV090x_WIDTH_Px_DIS_PRECHARGE_FIELD 1 +#define STV090x_OFFST_Px_DISTX_MODE_FIELD 0 +#define STV090x_WIDTH_Px_DISTX_MODE_FIELD 3 + +#define STV090x_Px_DISRXCTL(__x) (0xf1a1 - (__x - 1) * 0x10) +#define STV090x_P1_DISRXCTL STV090x_Px_DISRXCTL(1) +#define STV090x_P2_DISRXCTL STV090x_Px_DISRXCTL(2) +#define STV090x_OFFST_Px_RECEIVER_ON_FIELD 7 +#define STV090x_WIDTH_Px_RECEIVER_ON_FIELD 1 +#define STV090x_OFFST_Px_IGNO_SHORT22K_FIELD 6 +#define STV090x_WIDTH_Px_IGNO_SHORT22K_FIELD 1 +#define STV090x_OFFST_Px_ONECHIP_TRX_FIELD 5 +#define STV090x_WIDTH_Px_ONECHIP_TRX_FIELD 1 +#define STV090x_OFFST_Px_EXT_ENVELOP_FIELD 4 +#define STV090x_WIDTH_Px_EXT_ENVELOP_FIELD 1 +#define STV090x_OFFST_Px_PIN_SELECT_FIELD 2 +#define STV090x_WIDTH_Px_PIN_SELECT_FIELD 2 +#define STV090x_OFFST_Px_IRQ_RXEND_FIELD 1 +#define STV090x_WIDTH_Px_IRQ_RXEND_FIELD 1 +#define STV090x_OFFST_Px_IRQ_4NBYTES_FIELD 0 +#define STV090x_WIDTH_Px_IRQ_4NBYTES_FIELD 1 + +#define STV090x_Px_DISRX_ST0(__x) (0xf1a4 - (__x - 1) * 0x10) +#define STV090x_P1_DISRX_ST0 STV090x_Px_DISRX_ST0(1) +#define STV090x_P2_DISRX_ST0 STV090x_Px_DISRX_ST0(2) +#define STV090x_OFFST_Px_RX_END_FIELD 7 +#define STV090x_WIDTH_Px_RX_END_FIELD 1 +#define STV090x_OFFST_Px_RX_ACTIVE_FIELD 6 +#define STV090x_WIDTH_Px_RX_ACTIVE_FIELD 1 +#define STV090x_OFFST_Px_SHORT_22KHZ_FIELD 5 +#define STV090x_WIDTH_Px_SHORT_22KHZ_FIELD 1 +#define STV090x_OFFST_Px_CONT_TONE_FIELD 4 +#define STV090x_WIDTH_Px_CONT_TONE_FIELD 1 +#define STV090x_OFFST_Px_FIFO_4BREADY_FIELD 3 +#define STV090x_WIDTH_Px_FIFO_4BREADY_FIELD 1 +#define STV090x_OFFST_Px_FIFO_EMPTY_FIELD 2 +#define STV090x_WIDTH_Px_FIFO_EMPTY_FIELD 1 +#define STV090x_OFFST_Px_ABORT_DISRX_FIELD 0 +#define STV090x_WIDTH_Px_ABORT_DISRX_FIELD 1 + +#define STV090x_Px_DISRX_ST1(__x) (0xf1a5 - (__x - 1) * 0x10) +#define STV090x_P1_DISRX_ST1 STV090x_Px_DISRX_ST1(1) +#define STV090x_P2_DISRX_ST1 STV090x_Px_DISRX_ST1(2) +#define STV090x_OFFST_Px_RX_FAIL_FIELD 7 +#define STV090x_WIDTH_Px_RX_FAIL_FIELD 1 +#define STV090x_OFFST_Px_FIFO_PARITYFAIL_FIELD 6 +#define STV090x_WIDTH_Px_FIFO_PARITYFAIL_FIELD 1 +#define STV090x_OFFST_Px_RX_NONBYTE_FIELD 5 +#define STV090x_WIDTH_Px_RX_NONBYTE_FIELD 1 +#define STV090x_OFFST_Px_FIFO_OVERFLOW_FIELD 4 +#define STV090x_WIDTH_Px_FIFO_OVERFLOW_FIELD 1 +#define STV090x_OFFST_Px_FIFO_BYTENBR_FIELD 0 +#define STV090x_WIDTH_Px_FIFO_BYTENBR_FIELD 4 + +#define STV090x_Px_DISRXDATA(__x) (0xf1a6 - (__x - 1) * 0x10) +#define STV090x_P1_DISRXDATA STV090x_Px_DISRXDATA(1) +#define STV090x_P2_DISRXDATA STV090x_Px_DISRXDATA(2) +#define STV090x_OFFST_Px_DISRX_DATA_FIELD 0 +#define STV090x_WIDTH_Px_DISRX_DATA_FIELD 8 + +#define STV090x_Px_DISTXDATA(__x) (0xf1a7 - (__x - 1) * 0x10) +#define STV090x_P1_DISTXDATA STV090x_Px_DISTXDATA(1) +#define STV090x_P2_DISTXDATA STV090x_Px_DISTXDATA(2) +#define STV090x_OFFST_Px_DISEQC_FIFO_FIELD 0 +#define STV090x_WIDTH_Px_DISEQC_FIFO_FIELD 8 + +#define STV090x_Px_DISTXSTATUS(__x) (0xf1a8 - (__x - 1) * 0x10) +#define STV090x_P1_DISTXSTATUS STV090x_Px_DISTXSTATUS(1) +#define STV090x_P2_DISTXSTATUS STV090x_Px_DISTXSTATUS(2) +#define STV090x_OFFST_Px_TX_FAIL_FIELD 7 +#define STV090x_WIDTH_Px_TX_FAIL_FIELD 1 +#define STV090x_OFFST_Px_FIFO_FULL_FIELD 6 +#define STV090x_WIDTH_Px_FIFO_FULL_FIELD 1 +#define STV090x_OFFST_Px_TX_IDLE_FIELD 5 +#define STV090x_WIDTH_Px_TX_IDLE_FIELD 1 +#define STV090x_OFFST_Px_GAP_BURST_FIELD 4 +#define STV090x_WIDTH_Px_GAP_BURST_FIELD 1 +#define STV090x_OFFST_Px_TXFIFO_BYTES_FIELD 0 +#define STV090x_WIDTH_Px_TXFIFO_BYTES_FIELD 4 + +#define STV090x_Px_F22TX(__x) (0xf1a9 - (__x - 1) * 0x10) +#define STV090x_P1_F22TX STV090x_Px_F22TX(1) +#define STV090x_P2_F22TX STV090x_Px_F22TX(2) +#define STV090x_OFFST_Px_F22_REG_FIELD 0 +#define STV090x_WIDTH_Px_F22_REG_FIELD 8 + +#define STV090x_Px_F22RX(__x) (0xf1aa - (__x - 1) * 0x10) +#define STV090x_P1_F22RX STV090x_Px_F22RX(1) +#define STV090x_P2_F22RX STV090x_Px_F22RX(2) +#define STV090x_OFFST_Px_F22RX_REG_FIELD 0 +#define STV090x_WIDTH_Px_F22RX_REG_FIELD 8 + +#define STV090x_Px_ACRPRESC(__x) (0xf1ac - (__x - 1) * 0x10) +#define STV090x_P1_ACRPRESC STV090x_Px_ACRPRESC(1) +#define STV090x_P2_ACRPRESC STV090x_Px_ACRPRESC(2) +#define STV090x_OFFST_Px_ACR_PRESC_FIELD 0 +#define STV090x_WIDTH_Px_ACR_PRESC_FIELD 3 + +#define STV090x_Px_ACRDIV(__x) (0xf1ad - (__x - 1) * 0x10) +#define STV090x_P1_ACRDIV STV090x_Px_ACRDIV(1) +#define STV090x_P2_ACRDIV STV090x_Px_ACRDIV(2) +#define STV090x_OFFST_Px_ACR_DIV_FIELD 0 +#define STV090x_WIDTH_Px_ACR_DIV_FIELD 8 + +#define STV090x_Px_IQCONST(__x) (0xF400 - (__x - 1) * 0x200) +#define STV090x_P1_IQCONST STV090x_Px_IQCONST(1) +#define STV090x_P2_IQCONST STV090x_Px_IQCONST(2) +#define STV090x_OFFST_Px_CONSTEL_SELECT_FIELD 5 +#define STV090x_WIDTH_Px_CONSTEL_SELECT_FIELD 2 + +#define STV090x_Px_NOSCFG(__x) (0xF401 - (__x - 1) * 0x200) +#define STV090x_P1_NOSCFG STV090x_Px_NOSCFG(1) +#define STV090x_P2_NOSCFG STV090x_Px_NOSCFG(2) +#define STV090x_OFFST_Px_NOSPLH_BETA_FIELD 3 +#define STV090x_WIDTH_Px_NOSPLH_BETA_FIELD 2 +#define STV090x_OFFST_Px_NOSDATA_BETA_FIELD 0 +#define STV090x_WIDTH_Px_NOSDATA_BETA_FIELD 3 + +#define STV090x_Px_ISYMB(__x) (0xF402 - (__x - 1) * 0x200) +#define STV090x_P1_ISYMB STV090x_Px_ISYMB(1) +#define STV090x_P2_ISYMB STV090x_Px_ISYMB(2) +#define STV090x_OFFST_Px_I_SYMBOL_FIELD 0 +#define STV090x_WIDTH_Px_I_SYMBOL_FIELD 8 + +#define STV090x_Px_QSYMB(__x) (0xF403 - (__x - 1) * 0x200) +#define STV090x_P1_QSYMB STV090x_Px_QSYMB(1) +#define STV090x_P2_QSYMB STV090x_Px_QSYMB(2) +#define STV090x_OFFST_Px_Q_SYMBOL_FIELD 0 +#define STV090x_WIDTH_Px_Q_SYMBOL_FIELD 8 + +#define STV090x_Px_AGC1CFG(__x) (0xF404 - (__x - 1) * 0x200) +#define STV090x_P1_AGC1CFG STV090x_Px_AGC1CFG(1) +#define STV090x_P2_AGC1CFG STV090x_Px_AGC1CFG(2) +#define STV090x_OFFST_Px_DC_FROZEN_FIELD 7 +#define STV090x_WIDTH_Px_DC_FROZEN_FIELD 1 +#define STV090x_OFFST_Px_DC_CORRECT_FIELD 6 +#define STV090x_WIDTH_Px_DC_CORRECT_FIELD 1 +#define STV090x_OFFST_Px_AMM_FROZEN_FIELD 5 +#define STV090x_WIDTH_Px_AMM_FROZEN_FIELD 1 +#define STV090x_OFFST_Px_AMM_CORRECT_FIELD 4 +#define STV090x_WIDTH_Px_AMM_CORRECT_FIELD 1 +#define STV090x_OFFST_Px_QUAD_FROZEN_FIELD 3 +#define STV090x_WIDTH_Px_QUAD_FROZEN_FIELD 1 +#define STV090x_OFFST_Px_QUAD_CORRECT_FIELD 2 +#define STV090x_WIDTH_Px_QUAD_CORRECT_FIELD 1 + +#define STV090x_Px_AGC1CN(__x) (0xF406 - (__x - 1) * 0x200) +#define STV090x_P1_AGC1CN STV090x_Px_AGC1CN(1) +#define STV090x_P2_AGC1CN STV090x_Px_AGC1CN(2) +#define STV090x_WIDTH_Px_AGC1_LOCKED_FIELD 7 +#define STV090x_OFFST_Px_AGC1_LOCKED_FIELD 1 +#define STV090x_OFFST_Px_AGC1_MINPOWER_FIELD 4 +#define STV090x_WIDTH_Px_AGC1_MINPOWER_FIELD 1 +#define STV090x_OFFST_Px_AGCOUT_FAST_FIELD 3 +#define STV090x_WIDTH_Px_AGCOUT_FAST_FIELD 1 +#define STV090x_OFFST_Px_AGCIQ_BETA_FIELD 0 +#define STV090x_WIDTH_Px_AGCIQ_BETA_FIELD 3 + +#define STV090x_Px_AGC1REF(__x) (0xF407 - (__x - 1) * 0x200) +#define STV090x_P1_AGC1REF STV090x_Px_AGC1REF(1) +#define STV090x_P2_AGC1REF STV090x_Px_AGC1REF(2) +#define STV090x_OFFST_Px_AGCIQ_REF_FIELD 0 +#define STV090x_WIDTH_Px_AGCIQ_REF_FIELD 8 + +#define STV090x_Px_IDCCOMP(__x) (0xF408 - (__x - 1) * 0x200) +#define STV090x_P1_IDCCOMP STV090x_Px_IDCCOMP(1) +#define STV090x_P2_IDCCOMP STV090x_Px_IDCCOMP(2) +#define STV090x_OFFST_Px_IAVERAGE_ADJ_FIELD 0 +#define STV090x_WIDTH_Px_IAVERAGE_ADJ_FIELD 8 + +#define STV090x_Px_QDCCOMP(__x) (0xF409 - (__x - 1) * 0x200) +#define STV090x_P1_QDCCOMP STV090x_Px_QDCCOMP(1) +#define STV090x_P2_QDCCOMP STV090x_Px_QDCCOMP(2) +#define STV090x_OFFST_Px_QAVERAGE_ADJ_FIELD 0 +#define STV090x_WIDTH_Px_QAVERAGE_ADJ_FIELD 8 + +#define STV090x_Px_POWERI(__x) (0xF40A - (__x - 1) * 0x200) +#define STV090x_P1_POWERI STV090x_Px_POWERI(1) +#define STV090x_P2_POWERI STV090x_Px_POWERI(2) +#define STV090x_OFFST_Px_POWER_I_FIELD 0 +#define STV090x_WIDTH_Px_POWER_I_FIELD 8 + +#define STV090x_Px_POWERQ(__x) (0xF40B - (__x - 1) * 0x200) +#define STV090x_P1_POWERQ STV090x_Px_POWERQ(1) +#define STV090x_P2_POWERQ STV090x_Px_POWERQ(2) +#define STV090x_OFFST_Px_POWER_Q_FIELD 0 +#define STV090x_WIDTH_Px_POWER_Q_FIELD 8 + +#define STV090x_Px_AGC1AMM(__x) (0xF40C - (__x - 1) * 0x200) +#define STV090x_P1_AGC1AMM STV090x_Px_AGC1AMM(1) +#define STV090x_P2_AGC1AMM STV090x_Px_AGC1AMM(2) +#define STV090x_OFFST_Px_AMM_VALUE_FIELD 0 +#define STV090x_WIDTH_Px_AMM_VALUE_FIELD 8 + +#define STV090x_Px_AGC1QUAD(__x) (0xF40D - (__x - 1) * 0x200) +#define STV090x_P1_AGC1QUAD STV090x_Px_AGC1QUAD(1) +#define STV090x_P2_AGC1QUAD STV090x_Px_AGC1QUAD(2) +#define STV090x_OFFST_Px_QUAD_VALUE_FIELD 0 +#define STV090x_WIDTH_Px_QUAD_VALUE_FIELD 8 + +#define STV090x_Px_AGCIQINy(__x, __y) (0xF40F - (__x-1) * 0x200 - __y * 0x1) +#define STV090x_P1_AGCIQIN0 STV090x_Px_AGCIQINy(1, 0) +#define STV090x_P1_AGCIQIN1 STV090x_Px_AGCIQINy(1, 1) +#define STV090x_P2_AGCIQIN0 STV090x_Px_AGCIQINy(2, 0) +#define STV090x_P2_AGCIQIN1 STV090x_Px_AGCIQINy(2, 1) +#define STV090x_OFFST_Px_AGCIQ_VALUE_FIELD 0 +#define STV090x_WIDTH_Px_AGCIQ_VALUE_FIELD 8 + +#define STV090x_Px_DEMOD(__x) (0xF410 - (__x - 1) * 0x200) +#define STV090x_P1_DEMOD STV090x_Px_DEMOD(1) +#define STV090x_P2_DEMOD STV090x_Px_DEMOD(2) +#define STV090x_OFFST_Px_MANUAL_S2ROLLOFF_FIELD 7 +#define STV090x_WIDTH_Px_MANUAL_S2ROLLOFF_FIELD 1 +#define STV090x_OFFST_Px_DEMOD_STOP_FIELD 6 +#define STV090x_WIDTH_Px_DEMOD_STOP_FIELD 1 +#define STV090x_OFFST_Px_SPECINV_CONTROL_FIELD 4 +#define STV090x_WIDTH_Px_SPECINV_CONTROL_FIELD 2 +#define STV090x_OFFST_Px_FORCE_ENASAMP_FIELD 3 +#define STV090x_WIDTH_Px_FORCE_ENASAMP_FIELD 1 +#define STV090x_OFFST_Px_MANUAL_SXROLLOFF_FIELD 2 +#define STV090x_WIDTH_Px_MANUAL_SXROLLOFF_FIELD 1 +#define STV090x_OFFST_Px_ROLLOFF_CONTROL_FIELD 0 +#define STV090x_WIDTH_Px_ROLLOFF_CONTROL_FIELD 2 + +#define STV090x_Px_DMDMODCOD(__x) (0xF411 - (__x - 1) * 0x200) +#define STV090x_P1_DMDMODCOD STV090x_Px_DMDMODCOD(1) +#define STV090x_P2_DMDMODCOD STV090x_Px_DMDMODCOD(2) +#define STV090x_OFFST_Px_MANUAL_MODCOD_FIELD 7 +#define STV090x_WIDTH_Px_MANUAL_MODCOD_FIELD 1 +#define STV090x_OFFST_Px_DEMOD_MODCOD_FIELD 2 +#define STV090x_WIDTH_Px_DEMOD_MODCOD_FIELD 5 +#define STV090x_OFFST_Px_DEMOD_TYPE_FIELD 0 +#define STV090x_WIDTH_Px_DEMOD_TYPE_FIELD 2 + +#define STV090x_Px_DSTATUS(__x) (0xF412 - (__x - 1) * 0x200) +#define STV090x_P1_DSTATUS STV090x_Px_DSTATUS(1) +#define STV090x_P2_DSTATUS STV090x_Px_DSTATUS(2) +#define STV090x_OFFST_Px_CAR_LOCK_FIELD 7 +#define STV090x_WIDTH_Px_CAR_LOCK_FIELD 1 +#define STV090x_OFFST_Px_TMGLOCK_QUALITY_FIELD 5 +#define STV090x_WIDTH_Px_TMGLOCK_QUALITY_FIELD 2 +#define STV090x_OFFST_Px_LOCK_DEFINITIF_FIELD 3 +#define STV090x_WIDTH_Px_LOCK_DEFINITIF_FIELD 1 + +#define STV090x_Px_DSTATUS2(__x) (0xF413 - (__x - 1) * 0x200) +#define STV090x_P1_DSTATUS2 STV090x_Px_DSTATUS2(1) +#define STV090x_P2_DSTATUS2 STV090x_Px_DSTATUS2(2) +#define STV090x_OFFST_Px_DEMOD_DELOCK_FIELD 7 +#define STV090x_WIDTH_Px_DEMOD_DELOCK_FIELD 1 +#define STV090x_OFFST_Px_AGC1_NOSIGNALACK_FIELD 3 +#define STV090x_WIDTH_Px_AGC1_NOSIGNALACK_FIELD 1 +#define STV090x_OFFST_Px_AGC2_OVERFLOW_FIELD 2 +#define STV090x_WIDTH_Px_AGC2_OVERFLOW_FIELD 1 +#define STV090x_OFFST_Px_CFR_OVERFLOW_FIELD 1 +#define STV090x_WIDTH_Px_CFR_OVERFLOW_FIELD 1 +#define STV090x_OFFST_Px_GAMMA_OVERUNDER_FIELD 0 +#define STV090x_WIDTH_Px_GAMMA_OVERUNDER_FIELD 1 + +#define STV090x_Px_DMDCFGMD(__x) (0xF414 - (__x - 1) * 0x200) +#define STV090x_P1_DMDCFGMD STV090x_Px_DMDCFGMD(1) +#define STV090x_P2_DMDCFGMD STV090x_Px_DMDCFGMD(2) +#define STV090x_OFFST_Px_DVBS2_ENABLE_FIELD 7 +#define STV090x_WIDTH_Px_DVBS2_ENABLE_FIELD 1 +#define STV090x_OFFST_Px_DVBS1_ENABLE_FIELD 6 +#define STV090x_WIDTH_Px_DVBS1_ENABLE_FIELD 1 +#define STV090x_OFFST_Px_SCAN_ENABLE_FIELD 4 +#define STV090x_WIDTH_Px_SCAN_ENABLE_FIELD 1 +#define STV090x_OFFST_Px_CFR_AUTOSCAN_FIELD 3 +#define STV090x_WIDTH_Px_CFR_AUTOSCAN_FIELD 1 +#define STV090x_OFFST_Px_NOFORCE_RELOCK_FIELD 2 +#define STV090x_WIDTH_Px_NOFORCE_RELOCK_FIELD 1 +#define STV090x_OFFST_Px_TUN_RNG_FIELD 0 +#define STV090x_WIDTH_Px_TUN_RNG_FIELD 2 + +#define STV090x_Px_DMDCFG2(__x) (0xF415 - (__x - 1) * 0x200) +#define STV090x_P1_DMDCFG2 STV090x_Px_DMDCFG2(1) +#define STV090x_P2_DMDCFG2 STV090x_Px_DMDCFG2(2) +#define STV090x_OFFST_Px_S1S2_SEQUENTIAL_FIELD 6 +#define STV090x_WIDTH_Px_S1S2_SEQUENTIAL_FIELD 1 + +#define STV090x_Px_DMDISTATE(__x) (0xF416 - (__x - 1) * 0x200) +#define STV090x_P1_DMDISTATE STV090x_Px_DMDISTATE(1) +#define STV090x_P2_DMDISTATE STV090x_Px_DMDISTATE(2) +#define STV090x_OFFST_Px_I2C_DEMOD_MODE_FIELD 0 +#define STV090x_WIDTH_Px_I2C_DEMOD_MODE_FIELD 5 + +#define STV090x_Px_DMDTOM(__x) (0xF417 - (__x - 1) * 0x200) /* check */ +#define STV090x_P1_DMDTOM STV090x_Px_DMDTOM(1) +#define STV090x_P2_DMDTOM STV090x_Px_DMDTOM(2) + +#define STV090x_Px_DMDSTATE(__x) (0xF41B - (__x - 1) * 0x200) +#define STV090x_P1_DMDSTATE STV090x_Px_DMDSTATE(1) +#define STV090x_P2_DMDSTATE STV090x_Px_DMDSTATE(2) +#define STV090x_OFFST_Px_HEADER_MODE_FIELD 5 +#define STV090x_WIDTH_Px_HEADER_MODE_FIELD 2 + +#define STV090x_Px_DMDFLYW(__x) (0xF41C - (__x - 1) * 0x200) +#define STV090x_P1_DMDFLYW STV090x_Px_DMDFLYW(1) +#define STV090x_P2_DMDFLYW STV090x_Px_DMDFLYW(2) +#define STV090x_OFFST_Px_I2C_IRQVAL_FIELD 4 +#define STV090x_WIDTH_Px_I2C_IRQVAL_FIELD 4 +#define STV090x_OFFST_Px_FLYWHEEL_CPT_FIELD 0 +#define STV090x_WIDTH_Px_FLYWHEEL_CPT_FIELD 4 + +#define STV090x_Px_DSTATUS3(__x) (0xF41D - (__x - 1) * 0x200) +#define STV090x_P1_DSTATUS3 STV090x_Px_DSTATUS3(1) +#define STV090x_P2_DSTATUS3 STV090x_Px_DSTATUS3(2) +#define STV090x_OFFST_Px_DEMOD_CFGMODE_FIELD 5 +#define STV090x_WIDTH_Px_DEMOD_CFGMODE_FIELD 2 + +#define STV090x_Px_DMDCFG3(__x) (0xF41E - (__x - 1) * 0x200) +#define STV090x_P1_DMDCFG3 STV090x_Px_DMDCFG3(1) +#define STV090x_P2_DMDCFG3 STV090x_Px_DMDCFG3(2) +#define STV090x_OFFST_Px_NOSTOP_FIFOFULL_FIELD 3 +#define STV090x_WIDTH_Px_NOSTOP_FIFOFULL_FIELD 1 + +#define STV090x_Px_DMDCFG4(__x) (0xf41f - (__x - 1) * 0x200) +#define STV090x_P1_DMDCFG4 STV090x_Px_DMDCFG4(1) +#define STV090x_P2_DMDCFG4 STV090x_Px_DMDCFG4(2) + +#define STV090x_Px_CORRELMANT(__x) (0xF420 - (__x - 1) * 0x200) +#define STV090x_P1_CORRELMANT STV090x_Px_CORRELMANT(1) +#define STV090x_P2_CORRELMANT STV090x_Px_CORRELMANT(2) +#define STV090x_OFFST_Px_CORREL_MANT_FIELD 0 +#define STV090x_WIDTH_Px_CORREL_MANT_FIELD 8 + +#define STV090x_Px_CORRELABS(__x) (0xF421 - (__x - 1) * 0x200) +#define STV090x_P1_CORRELABS STV090x_Px_CORRELABS(1) +#define STV090x_P2_CORRELABS STV090x_Px_CORRELABS(2) +#define STV090x_OFFST_Px_CORREL_ABS_FIELD 0 +#define STV090x_WIDTH_Px_CORREL_ABS_FIELD 8 + +#define STV090x_Px_CORRELEXP(__x) (0xF422 - (__x - 1) * 0x200) +#define STV090x_P1_CORRELEXP STV090x_Px_CORRELEXP(1) +#define STV090x_P2_CORRELEXP STV090x_Px_CORRELEXP(2) +#define STV090x_OFFST_Px_CORREL_ABSEXP_FIELD 4 +#define STV090x_WIDTH_Px_CORREL_ABSEXP_FIELD 4 +#define STV090x_OFFST_Px_CORREL_EXP_FIELD 0 +#define STV090x_WIDTH_Px_CORREL_EXP_FIELD 4 + +#define STV090x_Px_PLHMODCOD(__x) (0xF424 - (__x - 1) * 0x200) +#define STV090x_P1_PLHMODCOD STV090x_Px_PLHMODCOD(1) +#define STV090x_P2_PLHMODCOD STV090x_Px_PLHMODCOD(2) +#define STV090x_OFFST_Px_SPECINV_DEMOD_FIELD 7 +#define STV090x_WIDTH_Px_SPECINV_DEMOD_FIELD 1 +#define STV090x_OFFST_Px_PLH_MODCOD_FIELD 2 +#define STV090x_WIDTH_Px_PLH_MODCOD_FIELD 5 +#define STV090x_OFFST_Px_PLH_TYPE_FIELD 0 +#define STV090x_WIDTH_Px_PLH_TYPE_FIELD 2 + +#define STV090x_Px_AGCK32(__x) (0xf42b - (__x - 1) * 0x200) +#define STV090x_P1_AGCK32 STV090x_Px_AGCK32(1) +#define STV090x_P2_AGCK32 STV090x_Px_AGCK32(2) + +#define STV090x_Px_AGC2O(__x) (0xF42C - (__x - 1) * 0x200) +#define STV090x_P1_AGC2O STV090x_Px_AGC2O(1) +#define STV090x_P2_AGC2O STV090x_Px_AGC2O(2) + +#define STV090x_Px_AGC2REF(__x) (0xF42D - (__x - 1) * 0x200) +#define STV090x_P1_AGC2REF STV090x_Px_AGC2REF(1) +#define STV090x_P2_AGC2REF STV090x_Px_AGC2REF(2) +#define STV090x_OFFST_Px_AGC2_REF_FIELD 0 +#define STV090x_WIDTH_Px_AGC2_REF_FIELD 8 + +#define STV090x_Px_AGC1ADJ(__x) (0xF42E - (__x - 1) * 0x200) +#define STV090x_P1_AGC1ADJ STV090x_Px_AGC1ADJ(1) +#define STV090x_P2_AGC1ADJ STV090x_Px_AGC1ADJ(2) +#define STV090x_OFFST_Px_AGC1_ADJUSTED_FIELD 0 +#define STV090x_WIDTH_Px_AGC1_ADJUSTED_FIELD 7 + +#define STV090x_Px_AGC2Iy(__x, __y) (0xF437 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_AGC2I0 STV090x_Px_AGC2Iy(1, 0) +#define STV090x_P1_AGC2I1 STV090x_Px_AGC2Iy(1, 1) +#define STV090x_P2_AGC2I0 STV090x_Px_AGC2Iy(2, 0) +#define STV090x_P2_AGC2I1 STV090x_Px_AGC2Iy(2, 1) +#define STV090x_OFFST_Px_AGC2_INTEGRATOR_FIELD 0 +#define STV090x_WIDTH_Px_AGC2_INTEGRATOR_FIELD 8 + +#define STV090x_Px_CARCFG(__x) (0xF438 - (__x - 1) * 0x200) +#define STV090x_P1_CARCFG STV090x_Px_CARCFG(1) +#define STV090x_P2_CARCFG STV090x_Px_CARCFG(2) +#define STV090x_OFFST_Px_EN_CAR2CENTER_FIELD 5 +#define STV090x_WIDTH_Px_EN_CAR2CENTER_FIELD 1 +#define STV090x_OFFST_Px_ROTATON_FIELD 2 +#define STV090x_WIDTH_Px_ROTATON_FIELD 1 +#define STV090x_OFFST_Px_PH_DET_ALGO_FIELD 0 +#define STV090x_WIDTH_Px_PH_DET_ALGO_FIELD 2 + +#define STV090x_Px_ACLC(__x) (0xF439 - (__x - 1) * 0x200) +#define STV090x_P1_ACLC STV090x_Px_ACLC(1) +#define STV090x_P2_ACLC STV090x_Px_ACLC(2) +#define STV090x_OFFST_Px_CAR_ALPHA_MANT_FIELD 4 +#define STV090x_WIDTH_Px_CAR_ALPHA_MANT_FIELD 2 +#define STV090x_OFFST_Px_CAR_ALPHA_EXP_FIELD 0 +#define STV090x_WIDTH_Px_CAR_ALPHA_EXP_FIELD 4 + +#define STV090x_Px_BCLC(__x) (0xF43A - (__x - 1) * 0x200) +#define STV090x_P1_BCLC STV090x_Px_BCLC(1) +#define STV090x_P2_BCLC STV090x_Px_BCLC(2) +#define STV090x_OFFST_Px_CAR_BETA_MANT_FIELD 4 +#define STV090x_WIDTH_Px_CAR_BETA_MANT_FIELD 2 +#define STV090x_OFFST_Px_CAR_BETA_EXP_FIELD 0 +#define STV090x_WIDTH_Px_CAR_BETA_EXP_FIELD 4 + +#define STV090x_Px_CARFREQ(__x) (0xF43D - (__x - 1) * 0x200) +#define STV090x_P1_CARFREQ STV090x_Px_CARFREQ(1) +#define STV090x_P2_CARFREQ STV090x_Px_CARFREQ(2) +#define STV090x_OFFST_Px_KC_COARSE_EXP_FIELD 4 +#define STV090x_WIDTH_Px_KC_COARSE_EXP_FIELD 4 +#define STV090x_OFFST_Px_BETA_FREQ_FIELD 0 +#define STV090x_WIDTH_Px_BETA_FREQ_FIELD 4 + +#define STV090x_Px_CARHDR(__x) (0xF43E - (__x - 1) * 0x200) +#define STV090x_P1_CARHDR STV090x_Px_CARHDR(1) +#define STV090x_P2_CARHDR STV090x_Px_CARHDR(2) +#define STV090x_OFFST_Px_FREQ_HDR_FIELD 0 +#define STV090x_WIDTH_Px_FREQ_HDR_FIELD 8 + +#define STV090x_Px_LDT(__x) (0xF43F - (__x - 1) * 0x200) +#define STV090x_P1_LDT STV090x_Px_LDT(1) +#define STV090x_P2_LDT STV090x_Px_LDT(2) +#define STV090x_OFFST_Px_CARLOCK_THRES_FIELD 0 +#define STV090x_WIDTH_Px_CARLOCK_THRES_FIELD 8 + +#define STV090x_Px_LDT2(__x) (0xF440 - (__x - 1) * 0x200) +#define STV090x_P1_LDT2 STV090x_Px_LDT2(1) +#define STV090x_P2_LDT2 STV090x_Px_LDT2(2) +#define STV090x_OFFST_Px_CARLOCK_THRES2_FIELD 0 +#define STV090x_WIDTH_Px_CARLOCK_THRES2_FIELD 8 + +#define STV090x_Px_CFRICFG(__x) (0xF441 - (__x - 1) * 0x200) +#define STV090x_P1_CFRICFG STV090x_Px_CFRICFG(1) +#define STV090x_P2_CFRICFG STV090x_Px_CFRICFG(2) +#define STV090x_OFFST_Px_NEG_CFRSTEP_FIELD 0 +#define STV090x_WIDTH_Px_NEG_CFRSTEP_FIELD 1 + +#define STV090x_Pn_CFRUPy(__x, __y) (0xF443 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_CFRUP0 STV090x_Pn_CFRUPy(1, 0) +#define STV090x_P1_CFRUP1 STV090x_Pn_CFRUPy(1, 1) +#define STV090x_P2_CFRUP0 STV090x_Pn_CFRUPy(2, 0) +#define STV090x_P2_CFRUP1 STV090x_Pn_CFRUPy(2, 1) +#define STV090x_OFFST_Px_CFR_UP_FIELD 0 +#define STV090x_WIDTH_Px_CFR_UP_FIELD 8 + +#define STV090x_Pn_CFRLOWy(__x, __y) (0xF447 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_CFRLOW0 STV090x_Pn_CFRLOWy(1, 0) +#define STV090x_P1_CFRLOW1 STV090x_Pn_CFRLOWy(1, 1) +#define STV090x_P2_CFRLOW0 STV090x_Pn_CFRLOWy(2, 0) +#define STV090x_P2_CFRLOW1 STV090x_Pn_CFRLOWy(2, 1) +#define STV090x_OFFST_Px_CFR_LOW_FIELD 0 +#define STV090x_WIDTH_Px_CFR_LOW_FIELD 8 + +#define STV090x_Pn_CFRINITy(__x, __y) (0xF449 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_CFRINIT0 STV090x_Pn_CFRINITy(1, 0) +#define STV090x_P1_CFRINIT1 STV090x_Pn_CFRINITy(1, 1) +#define STV090x_P2_CFRINIT0 STV090x_Pn_CFRINITy(2, 0) +#define STV090x_P2_CFRINIT1 STV090x_Pn_CFRINITy(2, 1) +#define STV090x_OFFST_Px_CFR_INIT_FIELD 0 +#define STV090x_WIDTH_Px_CFR_INIT_FIELD 8 + +#define STV090x_Px_CFRINC1(__x) (0xF44A - (__x - 1) * 0x200) +#define STV090x_P1_CFRINC1 STV090x_Px_CFRINC1(1) +#define STV090x_P2_CFRINC1 STV090x_Px_CFRINC1(2) +#define STV090x_OFFST_Px_CFR_INC1_FIELD 0 +#define STV090x_WIDTH_Px_CFR_INC1_FIELD 7 /* check */ + +#define STV090x_Px_CFRINC0(__x) (0xF44B - (__x - 1) * 0x200) +#define STV090x_P1_CFRINC0 STV090x_Px_CFRINC0(1) +#define STV090x_P2_CFRINC0 STV090x_Px_CFRINC0(2) +#define STV090x_OFFST_Px_CFR_INC0_FIELD 4 /* check */ +#define STV090x_WIDTH_Px_CFR_INC0_FIELD 4 + +#define STV090x_Pn_CFRy(__x, __y) (0xF44E - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_CFR0 STV090x_Pn_CFRy(1, 0) +#define STV090x_P1_CFR1 STV090x_Pn_CFRy(1, 1) +#define STV090x_P1_CFR2 STV090x_Pn_CFRy(1, 2) +#define STV090x_P2_CFR0 STV090x_Pn_CFRy(2, 0) +#define STV090x_P2_CFR1 STV090x_Pn_CFRy(2, 1) +#define STV090x_P2_CFR2 STV090x_Pn_CFRy(2, 2) +#define STV090x_OFFST_Px_CAR_FREQ_FIELD 0 +#define STV090x_WIDTH_Px_CAR_FREQ_FIELD 8 + +#define STV090x_Px_LDI(__x) (0xF44F - (__x - 1) * 0x200) +#define STV090x_P1_LDI STV090x_Px_LDI(1) +#define STV090x_P2_LDI STV090x_Px_LDI(2) +#define STV090x_OFFST_Px_LOCK_DET_INTEGR_FIELD 0 +#define STV090x_WIDTH_Px_LOCK_DET_INTEGR_FIELD 8 + +#define STV090x_Px_TMGCFG(__x) (0xF450 - (__x - 1) * 0x200) +#define STV090x_P1_TMGCFG STV090x_Px_TMGCFG(1) +#define STV090x_P2_TMGCFG STV090x_Px_TMGCFG(2) +#define STV090x_OFFST_Px_TMGLOCK_BETA_FIELD 6 +#define STV090x_WIDTH_Px_TMGLOCK_BETA_FIELD 2 +#define STV090x_OFFST_Px_DO_TIMING_FIELD 4 +#define STV090x_WIDTH_Px_DO_TIMING_FIELD 1 +#define STV090x_OFFST_Px_TMG_MINFREQ_FIELD 0 +#define STV090x_WIDTH_Px_TMG_MINFREQ_FIELD 2 + +#define STV090x_Px_RTC(__x) (0xF451 - (__x - 1) * 0x200) +#define STV090x_P1_RTC STV090x_Px_RTC(1) +#define STV090x_P2_RTC STV090x_Px_RTC(2) +#define STV090x_OFFST_Px_TMGALPHA_EXP_FIELD 4 +#define STV090x_WIDTH_Px_TMGALPHA_EXP_FIELD 4 +#define STV090x_OFFST_Px_TMGBETA_EXP_FIELD 0 +#define STV090x_WIDTH_Px_TMGBETA_EXP_FIELD 4 + +#define STV090x_Px_RTCS2(__x) (0xF452 - (__x - 1) * 0x200) +#define STV090x_P1_RTCS2 STV090x_Px_RTCS2(1) +#define STV090x_P2_RTCS2 STV090x_Px_RTCS2(2) +#define STV090x_OFFST_Px_TMGALPHAS2_EXP_FIELD 4 +#define STV090x_WIDTH_Px_TMGALPHAS2_EXP_FIELD 4 +#define STV090x_OFFST_Px_TMGBETAS2_EXP_FIELD 0 +#define STV090x_WIDTH_Px_TMGBETAS2_EXP_FIELD 4 + +#define STV090x_Px_TMGTHRISE(__x) (0xF453 - (__x - 1) * 0x200) +#define STV090x_P1_TMGTHRISE STV090x_Px_TMGTHRISE(1) +#define STV090x_P2_TMGTHRISE STV090x_Px_TMGTHRISE(2) +#define STV090x_OFFST_Px_TMGLOCK_THRISE_FIELD 0 +#define STV090x_WIDTH_Px_TMGLOCK_THRISE_FIELD 8 + +#define STV090x_Px_TMGTHFALL(__x) (0xF454 - (__x - 1) * 0x200) +#define STV090x_P1_TMGTHFALL STV090x_Px_TMGTHFALL(1) +#define STV090x_P2_TMGTHFALL STV090x_Px_TMGTHFALL(2) +#define STV090x_OFFST_Px_TMGLOCK_THFALL_FIELD 0 +#define STV090x_WIDTH_Px_TMGLOCK_THFALL_FIELD 8 + +#define STV090x_Px_SFRUPRATIO(__x) (0xF455 - (__x - 1) * 0x200) +#define STV090x_P1_SFRUPRATIO STV090x_Px_SFRUPRATIO(1) +#define STV090x_P2_SFRUPRATIO STV090x_Px_SFRUPRATIO(2) +#define STV090x_OFFST_Px_SFR_UPRATIO_FIELD 0 +#define STV090x_WIDTH_Px_SFR_UPRATIO_FIELD 8 + +#define STV090x_Px_SFRLOWRATIO(__x) (0xF456 - (__x - 1) * 0x200) +#define STV090x_P1_SFRLOWRATIO STV090x_Px_SFRLOWRATIO(1) +#define STV090x_P2_SFRLOWRATIO STV090x_Px_SFRLOWRATIO(2) +#define STV090x_OFFST_Px_SFR_LOWRATIO_FIELD 0 +#define STV090x_WIDTH_Px_SFR_LOWRATIO_FIELD 8 + +#define STV090x_Px_KREFTMG(__x) (0xF458 - (__x - 1) * 0x200) +#define STV090x_P1_KREFTMG STV090x_Px_KREFTMG(1) +#define STV090x_P2_KREFTMG STV090x_Px_KREFTMG(2) +#define STV090x_OFFST_Px_KREF_TMG_FIELD 0 +#define STV090x_WIDTH_Px_KREF_TMG_FIELD 8 + +#define STV090x_Px_SFRSTEP(__x) (0xF459 - (__x - 1) * 0x200) +#define STV090x_P1_SFRSTEP STV090x_Px_SFRSTEP(1) +#define STV090x_P2_SFRSTEP STV090x_Px_SFRSTEP(2) +#define STV090x_OFFST_Px_SFR_SCANSTEP_FIELD 4 +#define STV090x_WIDTH_Px_SFR_SCANSTEP_FIELD 4 +#define STV090x_OFFST_Px_SFR_CENTERSTEP_FIELD 0 +#define STV090x_WIDTH_Px_SFR_CENTERSTEP_FIELD 4 + +#define STV090x_Px_TMGCFG2(__x) (0xF45A - (__x - 1) * 0x200) +#define STV090x_P1_TMGCFG2 STV090x_Px_TMGCFG2(1) +#define STV090x_P2_TMGCFG2 STV090x_Px_TMGCFG2(2) +#define STV090x_OFFST_Px_SFRRATIO_FINE_FIELD 0 +#define STV090x_WIDTH_Px_SFRRATIO_FINE_FIELD 1 + +#define STV090x_Px_SFRINIT1(__x) (0xF45E - (__x - 1) * 0x200) +#define STV090x_P1_SFRINIT1 STV090x_Px_SFRINIT1(1) +#define STV090x_P2_SFRINIT1 STV090x_Px_SFRINIT1(2) +#define STV090x_OFFST_Px_SFR_INIT1_FIELD 0 +#define STV090x_WIDTH_Px_SFR_INIT1_FIELD 7 + +#define STV090x_Px_SFRINIT0(__x) (0xF45F - (__x - 1) * 0x200) +#define STV090x_P1_SFRINIT0 STV090x_Px_SFRINIT0(1) +#define STV090x_P2_SFRINIT0 STV090x_Px_SFRINIT0(2) +#define STV090x_OFFST_Px_SFR_INIT0_FIELD 0 +#define STV090x_WIDTH_Px_SFR_INIT0_FIELD 8 + +#define STV090x_Px_SFRUP1(__x) (0xF460 - (__x - 1) * 0x200) +#define STV090x_P1_SFRUP1 STV090x_Px_SFRUP1(1) +#define STV090x_P2_SFRUP1 STV090x_Px_SFRUP1(2) +#define STV090x_OFFST_Px_SYMB_FREQ_UP1_FIELD 0 +#define STV090x_WIDTH_Px_SYMB_FREQ_UP1_FIELD 7 + +#define STV090x_Px_SFRUP0(__x) (0xF461 - (__x - 1) * 0x200) +#define STV090x_P1_SFRUP0 STV090x_Px_SFRUP0(1) +#define STV090x_P2_SFRUP0 STV090x_Px_SFRUP0(2) +#define STV090x_OFFST_Px_SYMB_FREQ_UP0_FIELD 0 +#define STV090x_WIDTH_Px_SYMB_FREQ_UP0_FIELD 8 + +#define STV090x_Px_SFRLOW1(__x) (0xF462 - (__x - 1) * 0x200) +#define STV090x_P1_SFRLOW1 STV090x_Px_SFRLOW1(1) +#define STV090x_P2_SFRLOW1 STV090x_Px_SFRLOW1(2) +#define STV090x_OFFST_Px_SYMB_FREQ_LOW1_FIELD 0 +#define STV090x_WIDTH_Px_SYMB_FREQ_LOW1_FIELD 7 + +#define STV090x_Px_SFRLOW0(__x) (0xF463 - (__x - 1) * 0x200) +#define STV090x_P1_SFRLOW0 STV090x_Px_SFRLOW0(1) +#define STV090x_P2_SFRLOW0 STV090x_Px_SFRLOW0(2) +#define STV090x_OFFST_Px_SYMB_FREQ_LOW0_FIELD 0 +#define STV090x_WIDTH_Px_SYMB_FREQ_LOW0_FIELD 8 + +#define STV090x_Px_SFRy(__x, __y) (0xF467 - (__x-1) * 0x200 - __y) +#define STV090x_P1_SFR0 STV090x_Px_SFRy(1, 0) +#define STV090x_P1_SFR1 STV090x_Px_SFRy(1, 1) +#define STV090x_P1_SFR2 STV090x_Px_SFRy(1, 2) +#define STV090x_P1_SFR3 STV090x_Px_SFRy(1, 3) +#define STV090x_P2_SFR0 STV090x_Px_SFRy(2, 0) +#define STV090x_P2_SFR1 STV090x_Px_SFRy(2, 1) +#define STV090x_P2_SFR2 STV090x_Px_SFRy(2, 2) +#define STV090x_P2_SFR3 STV090x_Px_SFRy(2, 3) +#define STV090x_OFFST_Px_SYMB_FREQ_FIELD 0 +#define STV090x_WIDTH_Px_SYMB_FREQ_FIELD 8 + +#define STV090x_Px_TMGREG2(__x) (0xF468 - (__x - 1) * 0x200) +#define STV090x_P1_TMGREG2 STV090x_Px_TMGREG2(1) +#define STV090x_P2_TMGREG2 STV090x_Px_TMGREG2(2) +#define STV090x_OFFST_Px_TMGREG_FIELD 0 +#define STV090x_WIDTH_Px_TMGREG_FIELD 8 + +#define STV090x_Px_TMGREG1(__x) (0xF469 - (__x - 1) * 0x200) +#define STV090x_P1_TMGREG1 STV090x_Px_TMGREG1(1) +#define STV090x_P2_TMGREG1 STV090x_Px_TMGREG1(2) +#define STV090x_OFFST_Px_TMGREG_FIELD 0 +#define STV090x_WIDTH_Px_TMGREG_FIELD 8 + +#define STV090x_Px_TMGREG0(__x) (0xF46A - (__x - 1) * 0x200) +#define STV090x_P1_TMGREG0 STV090x_Px_TMGREG0(1) +#define STV090x_P2_TMGREG0 STV090x_Px_TMGREG0(2) +#define STV090x_OFFST_Px_TMGREG_FIELD 0 +#define STV090x_WIDTH_Px_TMGREG_FIELD 8 + +#define STV090x_Px_TMGLOCKy(__x, __y) (0xF46C - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_TMGLOCK0 STV090x_Px_TMGLOCKy(1, 0) +#define STV090x_P1_TMGLOCK1 STV090x_Px_TMGLOCKy(1, 1) +#define STV090x_P2_TMGLOCK0 STV090x_Px_TMGLOCKy(2, 0) +#define STV090x_P2_TMGLOCK1 STV090x_Px_TMGLOCKy(2, 1) +#define STV090x_OFFST_Px_TMGLOCK_LEVEL_FIELD 0 +#define STV090x_WIDTH_Px_TMGLOCK_LEVEL_FIELD 8 + +#define STV090x_Px_TMGOBS(__x) (0xF46D - (__x - 1) * 0x200) +#define STV090x_P1_TMGOBS STV090x_Px_TMGOBS(1) +#define STV090x_P2_TMGOBS STV090x_Px_TMGOBS(2) +#define STV090x_OFFST_Px_ROLLOFF_STATUS_FIELD 6 +#define STV090x_WIDTH_Px_ROLLOFF_STATUS_FIELD 2 + +#define STV090x_Px_EQUALCFG(__x) (0xF46F - (__x - 1) * 0x200) +#define STV090x_P1_EQUALCFG STV090x_Px_EQUALCFG(1) +#define STV090x_P2_EQUALCFG STV090x_Px_EQUALCFG(2) +#define STV090x_OFFST_Px_EQUAL_ON_FIELD 6 +#define STV090x_WIDTH_Px_EQUAL_ON_FIELD 1 +#define STV090x_OFFST_Px_MU_EQUALDFE_FIELD 0 +#define STV090x_WIDTH_Px_MU_EQUALDFE_FIELD 3 + +#define STV090x_Px_EQUAIy(__x, __y) (0xf470 - (__x-1) * 0x200 + 2 * (__y-1)) +#define STV090x_P1_EQUAI1 STV090x_Px_EQUAIy(1, 1) +#define STV090x_P1_EQUAI2 STV090x_Px_EQUAIy(1, 2) +#define STV090x_P1_EQUAI3 STV090x_Px_EQUAIy(1, 3) +#define STV090x_P1_EQUAI4 STV090x_Px_EQUAIy(1, 4) +#define STV090x_P1_EQUAI5 STV090x_Px_EQUAIy(1, 5) +#define STV090x_P1_EQUAI6 STV090x_Px_EQUAIy(1, 6) +#define STV090x_P1_EQUAI7 STV090x_Px_EQUAIy(1, 7) +#define STV090x_P1_EQUAI8 STV090x_Px_EQUAIy(1, 8) + +#define STV090x_P2_EQUAI1 STV090x_Px_EQUAIy(2, 1) +#define STV090x_P2_EQUAI2 STV090x_Px_EQUAIy(2, 2) +#define STV090x_P2_EQUAI3 STV090x_Px_EQUAIy(2, 3) +#define STV090x_P2_EQUAI4 STV090x_Px_EQUAIy(2, 4) +#define STV090x_P2_EQUAI5 STV090x_Px_EQUAIy(2, 5) +#define STV090x_P2_EQUAI6 STV090x_Px_EQUAIy(2, 6) +#define STV090x_P2_EQUAI7 STV090x_Px_EQUAIy(2, 7) +#define STV090x_P2_EQUAI8 STV090x_Px_EQUAIy(2, 8) +#define STV090x_OFFST_Px_EQUA_ACCIy_FIELD 0 +#define STV090x_WIDTH_Px_EQUA_ACCIy_FIELD 8 + +#define STV090x_Px_EQUAQy(__x, __y) (0xf471 - (__x-1) * 0x200 + 2 * (__y-1)) +#define STV090x_P1_EQUAQ1 STV090x_Px_EQUAQy(1, 1) +#define STV090x_P1_EQUAQ2 STV090x_Px_EQUAQy(1, 2) +#define STV090x_P1_EQUAQ3 STV090x_Px_EQUAQy(1, 3) +#define STV090x_P1_EQUAQ4 STV090x_Px_EQUAQy(1, 4) +#define STV090x_P1_EQUAQ5 STV090x_Px_EQUAQy(1, 5) +#define STV090x_P1_EQUAQ6 STV090x_Px_EQUAQy(1, 6) +#define STV090x_P1_EQUAQ7 STV090x_Px_EQUAQy(1, 7) +#define STV090x_P1_EQUAQ8 STV090x_Px_EQUAQy(1, 8) + +#define STV090x_P2_EQUAQ1 STV090x_Px_EQUAQy(2, 1) +#define STV090x_P2_EQUAQ2 STV090x_Px_EQUAQy(2, 2) +#define STV090x_P2_EQUAQ3 STV090x_Px_EQUAQy(2, 3) +#define STV090x_P2_EQUAQ4 STV090x_Px_EQUAQy(2, 4) +#define STV090x_P2_EQUAQ5 STV090x_Px_EQUAQy(2, 5) +#define STV090x_P2_EQUAQ6 STV090x_Px_EQUAQy(2, 6) +#define STV090x_P2_EQUAQ7 STV090x_Px_EQUAQy(2, 7) +#define STV090x_P2_EQUAQ8 STV090x_Px_EQUAQy(2, 8) +#define STV090x_OFFST_Px_EQUA_ACCQy_FIELD 0 +#define STV090x_WIDTH_Px_EQUA_ACCQy_FIELD 8 + +#define STV090x_Px_NNOSDATATy(__x, __y) (0xf481 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_NNOSDATAT0 STV090x_Px_NNOSDATATy(1, 0) +#define STV090x_P1_NNOSDATAT1 STV090x_Px_NNOSDATATy(1, 1) +#define STV090x_P2_NNOSDATAT0 STV090x_Px_NNOSDATATy(2, 0) +#define STV090x_P2_NNOSDATAT1 STV090x_Px_NNOSDATATy(2, 1) +#define STV090x_OFFST_Px_NOSDATAT_NORMED_FIELD 0 +#define STV090x_WIDTH_Px_NOSDATAT_NORMED_FIELD 8 + +#define STV090x_Px_NNOSDATAy(__x, __y) (0xf483 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_NNOSDATA0 STV090x_Px_NNOSDATAy(1, 0) +#define STV090x_P1_NNOSDATA1 STV090x_Px_NNOSDATAy(1, 1) +#define STV090x_P2_NNOSDATA0 STV090x_Px_NNOSDATAy(2, 0) +#define STV090x_P2_NNOSDATA1 STV090x_Px_NNOSDATAy(2, 1) +#define STV090x_OFFST_Px_NOSDATA_NORMED_FIELD 0 +#define STV090x_WIDTH_Px_NOSDATA_NORMED_FIELD 8 + +#define STV090x_Px_NNOSPLHTy(__x, __y) (0xf485 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_NNOSPLHT0 STV090x_Px_NNOSPLHTy(1, 0) +#define STV090x_P1_NNOSPLHT1 STV090x_Px_NNOSPLHTy(1, 1) +#define STV090x_P2_NNOSPLHT0 STV090x_Px_NNOSPLHTy(2, 0) +#define STV090x_P2_NNOSPLHT1 STV090x_Px_NNOSPLHTy(2, 1) +#define STV090x_OFFST_Px_NOSPLHT_NORMED_FIELD 0 +#define STV090x_WIDTH_Px_NOSPLHT_NORMED_FIELD 8 + +#define STV090x_Px_NNOSPLHy(__x, __y) (0xf487 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_NNOSPLH0 STV090x_Px_NNOSPLHy(1, 0) +#define STV090x_P1_NNOSPLH1 STV090x_Px_NNOSPLHy(1, 1) +#define STV090x_P2_NNOSPLH0 STV090x_Px_NNOSPLHy(2, 0) +#define STV090x_P2_NNOSPLH1 STV090x_Px_NNOSPLHy(2, 1) +#define STV090x_OFFST_Px_NOSPLH_NORMED_FIELD 0 +#define STV090x_WIDTH_Px_NOSPLH_NORMED_FIELD 8 + +#define STV090x_Px_NOSDATATy(__x, __y) (0xf489 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_NOSDATAT0 STV090x_Px_NOSDATATy(1, 0) +#define STV090x_P1_NOSDATAT1 STV090x_Px_NOSDATATy(1, 1) +#define STV090x_P2_NOSDATAT0 STV090x_Px_NOSDATATy(2, 0) +#define STV090x_P2_NOSDATAT1 STV090x_Px_NOSDATATy(2, 1) +#define STV090x_OFFST_Px_NOSDATAT_UNNORMED_FIELD 0 +#define STV090x_WIDTH_Px_NOSDATAT_UNNORMED_FIELD 8 + +#define STV090x_Px_NOSDATAy(__x, __y) (0xf48b - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_NOSDATA0 STV090x_Px_NOSDATAy(1, 0) +#define STV090x_P1_NOSDATA1 STV090x_Px_NOSDATAy(1, 1) +#define STV090x_P2_NOSDATA0 STV090x_Px_NOSDATAy(2, 0) +#define STV090x_P2_NOSDATA1 STV090x_Px_NOSDATAy(2, 1) +#define STV090x_OFFST_Px_NOSDATA_UNNORMED_FIELD 0 +#define STV090x_WIDTH_Px_NOSDATA_UNNORMED_FIELD 8 + +#define STV090x_Px_NOSPLHTy(__x, __y) (0xf48d - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_NOSPLHT0 STV090x_Px_NOSPLHTy(1, 0) +#define STV090x_P1_NOSPLHT1 STV090x_Px_NOSPLHTy(1, 1) +#define STV090x_P2_NOSPLHT0 STV090x_Px_NOSPLHTy(2, 0) +#define STV090x_P2_NOSPLHT1 STV090x_Px_NOSPLHTy(2, 1) +#define STV090x_OFFST_Px_NOSPLHT_UNNORMED_FIELD 0 +#define STV090x_WIDTH_Px_NOSPLHT_UNNORMED_FIELD 8 + +#define STV090x_Px_NOSPLHy(__x, __y) (0xf48f - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_NOSPLH0 STV090x_Px_NOSPLHy(1, 0) +#define STV090x_P1_NOSPLH1 STV090x_Px_NOSPLHy(1, 1) +#define STV090x_P2_NOSPLH0 STV090x_Px_NOSPLHy(2, 0) +#define STV090x_P2_NOSPLH1 STV090x_Px_NOSPLHy(2, 1) +#define STV090x_OFFST_Px_NOSPLH_UNNORMED_FIELD 0 +#define STV090x_WIDTH_Px_NOSPLH_UNNORMED_FIELD 8 + +#define STV090x_Px_CAR2CFG(__x) (0xf490 - (__x - 1) * 0x200) +#define STV090x_P1_CAR2CFG STV090x_Px_CAR2CFG(1) +#define STV090x_P2_CAR2CFG STV090x_Px_CAR2CFG(2) +#define STV090x_OFFST_Px_PN4_SELECT_FIELD 6 +#define STV090x_WIDTH_Px_PN4_SELECT_FIELD 1 +#define STV090x_OFFST_Px_CFR2_STOPDVBS1_FIELD 5 +#define STV090x_WIDTH_Px_CFR2_STOPDVBS1_FIELD 1 +#define STV090x_OFFST_Px_ROTA2ON_FIELD 2 +#define STV090x_WIDTH_Px_ROTA2ON_FIELD 1 +#define STV090x_OFFST_Px_PH_DET_ALGO2_FIELD 0 +#define STV090x_WIDTH_Px_PH_DET_ALGO2_FIELD 2 + +#define STV090x_Px_ACLC2(__x) (0xf491 - (__x - 1) * 0x200) +#define STV090x_P1_ACLC2 STV090x_Px_ACLC2(1) +#define STV090x_P2_ACLC2 STV090x_Px_ACLC2(2) +#define STV090x_OFFST_Px_CAR2_ALPHA_MANT_FIELD 4 +#define STV090x_WIDTH_Px_CAR2_ALPHA_MANT_FIELD 2 +#define STV090x_OFFST_Px_CAR2_ALPHA_EXP_FIELD 0 +#define STV090x_WIDTH_Px_CAR2_ALPHA_EXP_FIELD 4 + +#define STV090x_Px_BCLC2(__x) (0xf492 - (__x - 1) * 0x200) +#define STV090x_P1_BCLC2 STV090x_Px_BCLC2(1) +#define STV090x_P2_BCLC2 STV090x_Px_BCLC2(2) +#define STV090x_OFFST_Px_CAR2_BETA_MANT_FIELD 4 +#define STV090x_WIDTH_Px_CAR2_BETA_MANT_FIELD 2 +#define STV090x_OFFST_Px_CAR2_BETA_EXP_FIELD 0 +#define STV090x_WIDTH_Px_CAR2_BETA_EXP_FIELD 4 + +#define STV090x_Px_ACLC2S2Q(__x) (0xf497 - (__x - 1) * 0x200) +#define STV090x_P1_ACLC2S2Q STV090x_Px_ACLC2S2Q(1) +#define STV090x_P2_ACLC2S2Q STV090x_Px_ACLC2S2Q(2) +#define STV090x_OFFST_Px_ENAB_SPSKSYMB_FIELD 7 +#define STV090x_WIDTH_Px_ENAB_SPSKSYMB_FIELD 1 +#define STV090x_OFFST_Px_CAR2S2_Q_ALPH_M_FIELD 4 +#define STV090x_WIDTH_Px_CAR2S2_Q_ALPH_M_FIELD 2 +#define STV090x_OFFST_Px_CAR2S2_Q_ALPH_E_FIELD 0 +#define STV090x_WIDTH_Px_CAR2S2_Q_ALPH_E_FIELD 4 + +#define STV090x_Px_ACLC2S28(__x) (0xf498 - (__x - 1) * 0x200) +#define STV090x_P1_ACLC2S28 STV090x_Px_ACLC2S28(1) +#define STV090x_P2_ACLC2S28 STV090x_Px_ACLC2S28(2) +#define STV090x_OFFST_Px_CAR2S2_8_ALPH_M_FIELD 4 +#define STV090x_WIDTH_Px_CAR2S2_8_ALPH_M_FIELD 2 +#define STV090x_OFFST_Px_CAR2S2_8_ALPH_E_FIELD 0 +#define STV090x_WIDTH_Px_CAR2S2_8_ALPH_E_FIELD 4 + +#define STV090x_Px_ACLC2S216A(__x) (0xf499 - (__x - 1) * 0x200) +#define STV090x_P1_ACLC2S216A STV090x_Px_ACLC2S216A(1) +#define STV090x_P2_ACLC2S216A STV090x_Px_ACLC2S216A(2) +#define STV090x_OFFST_Px_CAR2S2_16A_ALPH_M_FIELD 4 +#define STV090x_WIDTH_Px_CAR2S2_16A_ALPH_M_FIELD 2 +#define STV090x_OFFST_Px_CAR2S2_16A_ALPH_E_FIELD 0 +#define STV090x_WIDTH_Px_CAR2S2_16A_ALPH_E_FIELD 4 + +#define STV090x_Px_ACLC2S232A(__x) (0xf49A - (__x - 1) * 0x200) +#define STV090x_P1_ACLC2S232A STV090x_Px_ACLC2S232A(1) +#define STV090x_P2_ACLC2S232A STV090x_Px_ACLC2S232A(2) +#define STV090x_OFFST_Px_CAR2S2_32A_ALPH_M_FIELD 4 +#define STV090x_WIDTH_Px_CAR2S2_32A_ALPH_M_FIELD 2 +#define STV090x_OFFST_Px_CAR2S2_32A_ALPH_E_FIELD 0 +#define STV090x_WIDTH_Px_CAR2S2_32A_ALPH_E_FIELD 4 + +#define STV090x_Px_BCLC2S2Q(__x) (0xf49c - (__x - 1) * 0x200) +#define STV090x_P1_BCLC2S2Q STV090x_Px_BCLC2S2Q(1) +#define STV090x_P2_BCLC2S2Q STV090x_Px_BCLC2S2Q(2) +#define STV090x_OFFST_Px_CAR2S2_Q_BETA_M_FIELD 4 +#define STV090x_WIDTH_Px_CAR2S2_Q_BETA_M_FIELD 2 +#define STV090x_OFFST_Px_CAR2S2_Q_BETA_E_FIELD 0 +#define STV090x_WIDTH_Px_CAR2S2_Q_BETA_E_FIELD 4 + +#define STV090x_Px_BCLC2S28(__x) (0xf49d - (__x - 1) * 0x200) +#define STV090x_P1_BCLC2S28 STV090x_Px_BCLC2S28(1) +#define STV090x_P2_BCLC2S28 STV090x_Px_BCLC2S28(2) +#define STV090x_OFFST_Px_CAR2S2_8_BETA_M_FIELD 4 +#define STV090x_WIDTH_Px_CAR2S2_8_BETA_M_FIELD 2 +#define STV090x_OFFST_Px_CAR2S2_8_BETA_E_FIELD 0 +#define STV090x_WIDTH_Px_CAR2S2_8_BETA_E_FIELD 4 + +#define STV090x_Px_BCLC2S216A(__x) (0xf49e - (__x - 1) * 0x200) +#define STV090x_P1_BCLC2S216A STV090x_Px_BCLC2S216A(1) +#define STV090x_P2_BCLC2S216A STV090x_Px_BCLC2S216A(2) +#define STV090x_OFFST_Px_CAR2S2_16A_BETA_M_FIELD 4 +#define STV090x_WIDTH_Px_CAR2S2_16A_BETA_M_FIELD 2 +#define STV090x_OFFST_Px_CAR2S2_16A_BETA_E_FIELD 0 +#define STV090x_WIDTH_Px_CAR2S2_16A_BETA_E_FIELD 4 + +#define STV090x_Px_BCLC2S232A(__x) (0xf49f - (__x - 1) * 0x200) +#define STV090x_P1_BCLC2S232A STV090x_Px_BCLC2S232A(1) +#define STV090x_P2_BCLC2S232A STV090x_Px_BCLC2S232A(2) +#define STV090x_OFFST_Px_CAR2S2_32A_BETA_M_FIELD 4 +#define STV090x_WIDTH_Px_CAR2S2_32A_BETA_M_FIELD 2 +#define STV090x_OFFST_Px_CAR2S2_32A_BETA_E_FIELD 0 +#define STV090x_WIDTH_Px_CAR2S2_32A_BETA_E_FIELD 4 + +#define STV090x_Px_PLROOT2(__x) (0xf4ac - (__x - 1) * 0x200) +#define STV090x_P1_PLROOT2 STV090x_Px_PLROOT2(1) +#define STV090x_P2_PLROOT2 STV090x_Px_PLROOT2(2) +#define STV090x_OFFST_Px_PLSCRAMB_MODE_FIELD 2 +#define STV090x_WIDTH_Px_PLSCRAMB_MODE_FIELD 2 +#define STV090x_OFFST_Px_PLSCRAMB_ROOT_FIELD 0 +#define STV090x_WIDTH_Px_PLSCRAMB_ROOT_FIELD 2 + +#define STV090x_Px_PLROOT1(__x) (0xf4ad - (__x - 1) * 0x200) +#define STV090x_P1_PLROOT1 STV090x_Px_PLROOT1(1) +#define STV090x_P2_PLROOT1 STV090x_Px_PLROOT1(2) +#define STV090x_OFFST_Px_PLSCRAMB_ROOT1_FIELD 0 +#define STV090x_WIDTH_Px_PLSCRAMB_ROOT1_FIELD 8 + +#define STV090x_Px_PLROOT0(__x) (0xf4ae - (__x - 1) * 0x200) +#define STV090x_P1_PLROOT0 STV090x_Px_PLROOT0(1) +#define STV090x_P2_PLROOT0 STV090x_Px_PLROOT0(2) +#define STV090x_OFFST_Px_PLSCRAMB_ROOT0_FIELD 0 +#define STV090x_WIDTH_Px_PLSCRAMB_ROOT0_FIELD 8 + +#define STV090x_Px_MODCODLST0(__x) (0xf4b0 - (__x - 1) * 0x200) /* check */ +#define STV090x_P1_MODCODLST0 STV090x_Px_MODCODLST0(1) +#define STV090x_P2_MODCODLST0 STV090x_Px_MODCODLST0(2) + +#define STV090x_Px_MODCODLST1(__x) (0xf4b1 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST1 STV090x_Px_MODCODLST1(1) +#define STV090x_P2_MODCODLST1 STV090x_Px_MODCODLST1(2) +#define STV090x_OFFST_Px_DIS_MODCOD29_FIELD 4 +#define STV090x_WIDTH_Px_DIS_MODCOD29_FIELD 4 +#define STV090x_OFFST_Px_DIS_32PSK_9_10_FIELD 0 +#define STV090x_WIDTH_Px_DIS_32PSK_9_10_FIELD 4 + +#define STV090x_Px_MODCODLST2(__x) (0xf4b2 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST2 STV090x_Px_MODCODLST2(1) +#define STV090x_P2_MODCODLST2 STV090x_Px_MODCODLST2(2) +#define STV090x_OFFST_Px_DIS_32PSK_8_9_FIELD 4 +#define STV090x_WIDTH_Px_DIS_32PSK_8_9_FIELD 4 +#define STV090x_OFFST_Px_DIS_32PSK_5_6_FIELD 0 +#define STV090x_WIDTH_Px_DIS_32PSK_5_6_FIELD 4 + +#define STV090x_Px_MODCODLST3(__x) (0xf4b3 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST3 STV090x_Px_MODCODLST3(1) +#define STV090x_P2_MODCODLST3 STV090x_Px_MODCODLST3(2) +#define STV090x_OFFST_Px_DIS_32PSK_4_5_FIELD 4 +#define STV090x_WIDTH_Px_DIS_32PSK_4_5_FIELD 4 +#define STV090x_OFFST_Px_DIS_32PSK_3_4_FIELD 0 +#define STV090x_WIDTH_Px_DIS_32PSK_3_4_FIELD 4 + +#define STV090x_Px_MODCODLST4(__x) (0xf4b4 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST4 STV090x_Px_MODCODLST4(1) +#define STV090x_P2_MODCODLST4 STV090x_Px_MODCODLST4(2) +#define STV090x_OFFST_Px_DIS_16PSK_9_10_FIELD 4 +#define STV090x_WIDTH_Px_DIS_16PSK_9_10_FIELD 4 +#define STV090x_OFFST_Px_DIS_16PSK_8_9_FIELD 0 +#define STV090x_WIDTH_Px_DIS_16PSK_8_9_FIELD 4 + +#define STV090x_Px_MODCODLST5(__x) (0xf4b5 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST5 STV090x_Px_MODCODLST5(1) +#define STV090x_P2_MODCODLST5 STV090x_Px_MODCODLST5(2) +#define STV090x_OFFST_Px_DIS_16PSK_5_6_FIELD 4 +#define STV090x_WIDTH_Px_DIS_16PSK_5_6_FIELD 4 +#define STV090x_OFFST_Px_DIS_16PSK_4_5_FIELD 0 +#define STV090x_WIDTH_Px_DIS_16PSK_4_5_FIELD 4 + +#define STV090x_Px_MODCODLST6(__x) (0xf4b6 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST6 STV090x_Px_MODCODLST6(1) +#define STV090x_P2_MODCODLST6 STV090x_Px_MODCODLST6(2) +#define STV090x_OFFST_Px_DIS_16PSK_3_4_FIELD 4 +#define STV090x_WIDTH_Px_DIS_16PSK_3_4_FIELD 4 +#define STV090x_OFFST_Px_DIS_16PSK_2_3_FIELD 0 +#define STV090x_WIDTH_Px_DIS_16PSK_2_3_FIELD 4 + +#define STV090x_Px_MODCODLST7(__x) (0xf4b7 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST7 STV090x_Px_MODCODLST7(1) +#define STV090x_P2_MODCODLST7 STV090x_Px_MODCODLST7(2) +#define STV090x_OFFST_Px_DIS_8P_9_10_FIELD 4 +#define STV090x_WIDTH_Px_DIS_8P_9_10_FIELD 4 +#define STV090x_OFFST_Px_DIS_8P_8_9_FIELD 0 +#define STV090x_WIDTH_Px_DIS_8P_8_9_FIELD 4 + +#define STV090x_Px_MODCODLST8(__x) (0xf4b8 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST8 STV090x_Px_MODCODLST8(1) +#define STV090x_P2_MODCODLST8 STV090x_Px_MODCODLST8(2) +#define STV090x_OFFST_Px_DIS_8P_5_6_FIELD 4 +#define STV090x_WIDTH_Px_DIS_8P_5_6_FIELD 4 +#define STV090x_OFFST_Px_DIS_8P_3_4_FIELD 0 +#define STV090x_WIDTH_Px_DIS_8P_3_4_FIELD 4 + +#define STV090x_Px_MODCODLST9(__x) (0xf4b9 - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLST9 STV090x_Px_MODCODLST9(1) +#define STV090x_P2_MODCODLST9 STV090x_Px_MODCODLST9(2) +#define STV090x_OFFST_Px_DIS_8P_2_3_FIELD 4 +#define STV090x_WIDTH_Px_DIS_8P_2_3_FIELD 4 +#define STV090x_OFFST_Px_DIS_8P_3_5_FIELD 0 +#define STV090x_WIDTH_Px_DIS_8P_3_5_FIELD 4 + +#define STV090x_Px_MODCODLSTA(__x) (0xf4ba - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLSTA STV090x_Px_MODCODLSTA(1) +#define STV090x_P2_MODCODLSTA STV090x_Px_MODCODLSTA(2) +#define STV090x_OFFST_Px_DIS_QP_9_10_FIELD 4 +#define STV090x_WIDTH_Px_DIS_QP_9_10_FIELD 4 +#define STV090x_OFFST_Px_DIS_QP_8_9_FIELD 0 +#define STV090x_WIDTH_Px_DIS_QP_8_9_FIELD 4 + +#define STV090x_Px_MODCODLSTB(__x) (0xf4bb - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLSTB STV090x_Px_MODCODLSTB(1) +#define STV090x_P2_MODCODLSTB STV090x_Px_MODCODLSTB(2) +#define STV090x_OFFST_Px_DIS_QP_5_6_FIELD 4 +#define STV090x_WIDTH_Px_DIS_QP_5_6_FIELD 4 +#define STV090x_OFFST_Px_DIS_QP_4_5_FIELD 0 +#define STV090x_WIDTH_Px_DIS_QP_4_5_FIELD 4 + +#define STV090x_Px_MODCODLSTC(__x) (0xf4bc - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLSTC STV090x_Px_MODCODLSTC(1) +#define STV090x_P2_MODCODLSTC STV090x_Px_MODCODLSTC(2) +#define STV090x_OFFST_Px_DIS_QP_3_4_FIELD 4 +#define STV090x_WIDTH_Px_DIS_QP_3_4_FIELD 4 +#define STV090x_OFFST_Px_DIS_QP_2_3_FIELD 0 +#define STV090x_WIDTH_Px_DIS_QP_2_3_FIELD 4 + +#define STV090x_Px_MODCODLSTD(__x) (0xf4bd - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLSTD STV090x_Px_MODCODLSTD(1) +#define STV090x_P2_MODCODLSTD STV090x_Px_MODCODLSTD(2) +#define STV090x_OFFST_Px_DIS_QP_3_5_FIELD 4 +#define STV090x_WIDTH_Px_DIS_QP_3_5_FIELD 4 +#define STV090x_OFFST_Px_DIS_QP_1_2_FIELD 0 +#define STV090x_WIDTH_Px_DIS_QP_1_2_FIELD 4 + +#define STV090x_Px_MODCODLSTE(__x) (0xf4be - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLSTE STV090x_Px_MODCODLSTE(1) +#define STV090x_P2_MODCODLSTE STV090x_Px_MODCODLSTE(2) +#define STV090x_OFFST_Px_DIS_QP_2_5_FIELD 4 +#define STV090x_WIDTH_Px_DIS_QP_2_5_FIELD 4 +#define STV090x_OFFST_Px_DIS_QP_1_3_FIELD 0 +#define STV090x_WIDTH_Px_DIS_QP_1_3_FIELD 4 + +#define STV090x_Px_MODCODLSTF(__x) (0xf4bf - (__x - 1) * 0x200) +#define STV090x_P1_MODCODLSTF STV090x_Px_MODCODLSTF(1) +#define STV090x_P2_MODCODLSTF STV090x_Px_MODCODLSTF(2) +#define STV090x_OFFST_Px_DIS_QP_1_4_FIELD 4 +#define STV090x_WIDTH_Px_DIS_QP_1_4_FIELD 4 + +#define STV090x_Px_GAUSSR0(__x) (0xf4c0 - (__x - 1) * 0x200) +#define STV090x_P1_GAUSSR0 STV090x_Px_GAUSSR0(1) +#define STV090x_P2_GAUSSR0 STV090x_Px_GAUSSR0(2) +#define STV090x_OFFST_Px_EN_CCIMODE_FIELD 7 +#define STV090x_WIDTH_Px_EN_CCIMODE_FIELD 1 +#define STV090x_OFFST_Px_R0_GAUSSIEN_FIELD 0 +#define STV090x_WIDTH_Px_R0_GAUSSIEN_FIELD 7 + +#define STV090x_Px_CCIR0(__x) (0xf4c1 - (__x - 1) * 0x200) +#define STV090x_P1_CCIR0 STV090x_Px_CCIR0(1) +#define STV090x_P2_CCIR0 STV090x_Px_CCIR0(2) +#define STV090x_OFFST_Px_CCIDETECT_PLH_FIELD 7 +#define STV090x_WIDTH_Px_CCIDETECT_PLH_FIELD 1 +#define STV090x_OFFST_Px_R0_CCI_FIELD 0 +#define STV090x_WIDTH_Px_R0_CCI_FIELD 7 + +#define STV090x_Px_CCIQUANT(__x) (0xf4c2 - (__x - 1) * 0x200) +#define STV090x_P1_CCIQUANT STV090x_Px_CCIQUANT(1) +#define STV090x_P2_CCIQUANT STV090x_Px_CCIQUANT(2) +#define STV090x_OFFST_Px_CCI_BETA_FIELD 5 +#define STV090x_WIDTH_Px_CCI_BETA_FIELD 3 +#define STV090x_OFFST_Px_CCI_QUANT_FIELD 0 +#define STV090x_WIDTH_Px_CCI_QUANT_FIELD 5 + +#define STV090x_Px_CCITHRESH(__x) (0xf4c3 - (__x - 1) * 0x200) +#define STV090x_P1_CCITHRESH STV090x_Px_CCITHRESH(1) +#define STV090x_P2_CCITHRESH STV090x_Px_CCITHRESH(2) +#define STV090x_OFFST_Px_CCI_THRESHOLD_FIELD 0 +#define STV090x_WIDTH_Px_CCI_THRESHOLD_FIELD 8 + +#define STV090x_Px_CCIACC(__x) (0xf4c4 - (__x - 1) * 0x200) +#define STV090x_P1_CCIACC STV090x_Px_CCIACC(1) +#define STV090x_P2_CCIACC STV090x_Px_CCIACC(2) +#define STV090x_OFFST_Px_CCI_VALUE_FIELD 0 +#define STV090x_WIDTH_Px_CCI_VALUE_FIELD 8 + +#define STV090x_Px_DMDRESCFG(__x) (0xF4C6 - (__x - 1) * 0x200) +#define STV090x_P1_DMDRESCFG STV090x_Px_DMDRESCFG(1) +#define STV090x_P2_DMDRESCFG STV090x_Px_DMDRESCFG(2) +#define STV090x_OFFST_Px_DMDRES_RESET_FIELD 7 +#define STV090x_WIDTH_Px_DMDRES_RESET_FIELD 1 + +#define STV090x_Px_DMDRESADR(__x) (0xF4C7 - (__x - 1) * 0x200) +#define STV090x_P1_DMDRESADR STV090x_Px_DMDRESADR(1) +#define STV090x_P2_DMDRESADR STV090x_Px_DMDRESADR(2) +#define STV090x_OFFST_Px_DMDRES_RESNBR_FIELD 0 +#define STV090x_WIDTH_Px_DMDRES_RESNBR_FIELD 4 + +#define STV090x_Px_DMDRESDATAy(__x, __y) (0xF4C8 - (__x - 1) * 0x200 + (7 - __y)) +#define STV090x_P1_DMDRESDATA0 STV090x_Px_DMDRESDATAy(1, 0) +#define STV090x_P1_DMDRESDATA1 STV090x_Px_DMDRESDATAy(1, 1) +#define STV090x_P1_DMDRESDATA2 STV090x_Px_DMDRESDATAy(1, 2) +#define STV090x_P1_DMDRESDATA3 STV090x_Px_DMDRESDATAy(1, 3) +#define STV090x_P1_DMDRESDATA4 STV090x_Px_DMDRESDATAy(1, 4) +#define STV090x_P1_DMDRESDATA5 STV090x_Px_DMDRESDATAy(1, 5) +#define STV090x_P1_DMDRESDATA6 STV090x_Px_DMDRESDATAy(1, 6) +#define STV090x_P1_DMDRESDATA7 STV090x_Px_DMDRESDATAy(1, 7) +#define STV090x_P2_DMDRESDATA0 STV090x_Px_DMDRESDATAy(2, 0) +#define STV090x_P2_DMDRESDATA1 STV090x_Px_DMDRESDATAy(2, 1) +#define STV090x_P2_DMDRESDATA2 STV090x_Px_DMDRESDATAy(2, 2) +#define STV090x_P2_DMDRESDATA3 STV090x_Px_DMDRESDATAy(2, 3) +#define STV090x_P2_DMDRESDATA4 STV090x_Px_DMDRESDATAy(2, 4) +#define STV090x_P2_DMDRESDATA5 STV090x_Px_DMDRESDATAy(2, 5) +#define STV090x_P2_DMDRESDATA6 STV090x_Px_DMDRESDATAy(2, 6) +#define STV090x_P2_DMDRESDATA7 STV090x_Px_DMDRESDATAy(2, 7) +#define STV090x_OFFST_Px_DMDRES_DATA_FIELD 0 +#define STV090x_WIDTH_Px_DMDRES_DATA_FIELD 8 + +#define STV090x_Px_FFEIy(__x, __y) (0xf4d0 - (__x - 1) * 0x200 + 0x2 * (__y - 1)) +#define STV090x_P1_FFEI1 STV090x_Px_FFEIy(1, 1) +#define STV090x_P1_FFEI2 STV090x_Px_FFEIy(1, 2) +#define STV090x_P1_FFEI3 STV090x_Px_FFEIy(1, 3) +#define STV090x_P1_FFEI4 STV090x_Px_FFEIy(1, 4) +#define STV090x_P2_FFEI1 STV090x_Px_FFEIy(2, 1) +#define STV090x_P2_FFEI2 STV090x_Px_FFEIy(2, 2) +#define STV090x_P2_FFEI3 STV090x_Px_FFEIy(2, 3) +#define STV090x_P2_FFEI4 STV090x_Px_FFEIy(2, 4) +#define STV090x_OFFST_Px_FFE_ACCIy_FIELD 0 +#define STV090x_WIDTH_Px_FFE_ACCIy_FIELD 8 + +#define STV090x_Px_FFEQy(__x, __y) (0xf4d1 - (__x - 1) * 0x200 + 0x2 * (__y - 1)) +#define STV090x_P1_FFEQ1 STV090x_Px_FFEQy(1, 1) +#define STV090x_P1_FFEQ2 STV090x_Px_FFEQy(1, 2) +#define STV090x_P1_FFEQ3 STV090x_Px_FFEQy(1, 3) +#define STV090x_P1_FFEQ4 STV090x_Px_FFEQy(1, 4) +#define STV090x_P2_FFEQ1 STV090x_Px_FFEQy(2, 1) +#define STV090x_P2_FFEQ2 STV090x_Px_FFEQy(2, 2) +#define STV090x_P2_FFEQ3 STV090x_Px_FFEQy(2, 3) +#define STV090x_P2_FFEQ4 STV090x_Px_FFEQy(2, 4) +#define STV090x_OFFST_Px_FFE_ACCQy_FIELD 0 +#define STV090x_WIDTH_Px_FFE_ACCQy_FIELD 8 + +#define STV090x_Px_FFECFG(__x) (0xf4d8 - (__x - 1) * 0x200) +#define STV090x_P1_FFECFG STV090x_Px_FFECFG(1) +#define STV090x_P2_FFECFG STV090x_Px_FFECFG(2) +#define STV090x_OFFST_Px_EQUALFFE_ON_FIELD 6 +#define STV090x_WIDTH_Px_EQUALFFE_ON_FIELD 1 + +#define STV090x_Px_SMAPCOEF7(__x) (0xf500 - (__x - 1) * 0x200) +#define STV090x_P1_SMAPCOEF7 STV090x_Px_SMAPCOEF7(1) +#define STV090x_P2_SMAPCOEF7 STV090x_Px_SMAPCOEF7(2) +#define STV090x_OFFST_Px_DIS_QSCALE_FIELD 7 +#define STV090x_WIDTH_Px_DIS_QSCALE_FIELD 1 +#define STV090x_OFFST_Px_SMAPCOEF_Q_LLR12_FIELD 0 +#define STV090x_WIDTH_Px_SMAPCOEF_Q_LLR12_FIELD 7 + +#define STV090x_Px_SMAPCOEF6(__x) (0xf501 - (__x - 1) * 0x200) +#define STV090x_P1_SMAPCOEF6 STV090x_Px_SMAPCOEF6(1) +#define STV090x_P2_SMAPCOEF6 STV090x_Px_SMAPCOEF6(2) +#define STV090x_OFFST_Px_ADJ_8PSKLLR1_FIELD 2 +#define STV090x_WIDTH_Px_ADJ_8PSKLLR1_FIELD 1 +#define STV090x_OFFST_Px_OLD_8PSKLLR1_FIELD 1 +#define STV090x_WIDTH_Px_OLD_8PSKLLR1_FIELD 1 +#define STV090x_OFFST_Px_DIS_AB8PSK_FIELD 0 +#define STV090x_WIDTH_Px_DIS_AB8PSK_FIELD 1 + +#define STV090x_Px_SMAPCOEF5(__x) (0xf502 - (__x - 1) * 0x200) +#define STV090x_P1_SMAPCOEF5 STV090x_Px_SMAPCOEF5(1) +#define STV090x_P2_SMAPCOEF5 STV090x_Px_SMAPCOEF5(2) +#define STV090x_OFFST_Px_DIS_8SCALE_FIELD 7 +#define STV090x_WIDTH_Px_DIS_8SCALE_FIELD 1 +#define STV090x_OFFST_Px_SMAPCOEF_8P_LLR23_FIELD 0 +#define STV090x_WIDTH_Px_SMAPCOEF_8P_LLR23_FIELD 7 + +#define STV090x_Px_DMDPLHSTAT(__x) (0xF520 - (__x - 1) * 0x200) +#define STV090x_P1_DMDPLHSTAT STV090x_Px_DMDPLHSTAT(1) +#define STV090x_P2_DMDPLHSTAT STV090x_Px_DMDPLHSTAT(2) +#define STV090x_OFFST_Px_PLH_STATISTIC_FIELD 0 +#define STV090x_WIDTH_Px_PLH_STATISTIC_FIELD 8 + +#define STV090x_Px_LOCKTIMEy(__x, __y) (0xF525 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_LOCKTIME0 STV090x_Px_LOCKTIMEy(1, 0) +#define STV090x_P1_LOCKTIME1 STV090x_Px_LOCKTIMEy(1, 1) +#define STV090x_P1_LOCKTIME2 STV090x_Px_LOCKTIMEy(1, 2) +#define STV090x_P1_LOCKTIME3 STV090x_Px_LOCKTIMEy(1, 3) +#define STV090x_P2_LOCKTIME0 STV090x_Px_LOCKTIMEy(2, 0) +#define STV090x_P2_LOCKTIME1 STV090x_Px_LOCKTIMEy(2, 1) +#define STV090x_P2_LOCKTIME2 STV090x_Px_LOCKTIMEy(2, 2) +#define STV090x_P2_LOCKTIME3 STV090x_Px_LOCKTIMEy(2, 3) +#define STV090x_OFFST_Px_DEMOD_LOCKTIME_FIELD 0 +#define STV090x_WIDTH_Px_DEMOD_LOCKTIME_FIELD 8 + +#define STV090x_Px_TNRCFG(__x) (0xf4e0 - (__x - 1) * 0x200) /* check */ +#define STV090x_P1_TNRCFG STV090x_Px_TNRCFG(1) +#define STV090x_P2_TNRCFG STV090x_Px_TNRCFG(2) + +#define STV090x_Px_TNRCFG2(__x) (0xf4e1 - (__x - 1) * 0x200) +#define STV090x_P1_TNRCFG2 STV090x_Px_TNRCFG2(1) +#define STV090x_P2_TNRCFG2 STV090x_Px_TNRCFG2(2) +#define STV090x_OFFST_Px_TUN_IQSWAP_FIELD 7 +#define STV090x_WIDTH_Px_TUN_IQSWAP_FIELD 1 + +#define STV090x_Px_VITSCALE(__x) (0xf532 - (__x - 1) * 0x200) +#define STV090x_P1_VITSCALE STV090x_Px_VITSCALE(1) +#define STV090x_P2_VITSCALE STV090x_Px_VITSCALE(2) +#define STV090x_OFFST_Px_NVTH_NOSRANGE_FIELD 7 +#define STV090x_WIDTH_Px_NVTH_NOSRANGE_FIELD 1 +#define STV090x_OFFST_Px_VERROR_MAXMODE_FIELD 6 +#define STV090x_WIDTH_Px_VERROR_MAXMODE_FIELD 1 +#define STV090x_OFFST_Px_NSLOWSN_LOCKED_FIELD 3 +#define STV090x_WIDTH_Px_NSLOWSN_LOCKED_FIELD 1 +#define STV090x_OFFST_Px_DIS_RSFLOCK_FIELD 1 +#define STV090x_WIDTH_Px_DIS_RSFLOCK_FIELD 1 + +#define STV090x_Px_FECM(__x) (0xf533 - (__x - 1) * 0x200) +#define STV090x_P1_FECM STV090x_Px_FECM(1) +#define STV090x_P2_FECM STV090x_Px_FECM(2) +#define STV090x_OFFST_Px_DSS_DVB_FIELD 7 +#define STV090x_WIDTH_Px_DSS_DVB_FIELD 1 +#define STV090x_OFFST_Px_DSS_SRCH_FIELD 4 +#define STV090x_WIDTH_Px_DSS_SRCH_FIELD 1 +#define STV090x_OFFST_Px_SYNCVIT_FIELD 1 +#define STV090x_WIDTH_Px_SYNCVIT_FIELD 1 +#define STV090x_OFFST_Px_IQINV_FIELD 0 +#define STV090x_WIDTH_Px_IQINV_FIELD 1 + +#define STV090x_Px_VTH12(__x) (0xf534 - (__x - 1) * 0x200) +#define STV090x_P1_VTH12 STV090x_Px_VTH12(1) +#define STV090x_P2_VTH12 STV090x_Px_VTH12(2) +#define STV090x_OFFST_Px_VTH12_FIELD 0 +#define STV090x_WIDTH_Px_VTH12_FIELD 8 + +#define STV090x_Px_VTH23(__x) (0xf535 - (__x - 1) * 0x200) +#define STV090x_P1_VTH23 STV090x_Px_VTH23(1) +#define STV090x_P2_VTH23 STV090x_Px_VTH23(2) +#define STV090x_OFFST_Px_VTH23_FIELD 0 +#define STV090x_WIDTH_Px_VTH23_FIELD 8 + +#define STV090x_Px_VTH34(__x) (0xf536 - (__x - 1) * 0x200) +#define STV090x_P1_VTH34 STV090x_Px_VTH34(1) +#define STV090x_P2_VTH34 STV090x_Px_VTH34(2) +#define STV090x_OFFST_Px_VTH34_FIELD 0 +#define STV090x_WIDTH_Px_VTH34_FIELD 8 + +#define STV090x_Px_VTH56(__x) (0xf537 - (__x - 1) * 0x200) +#define STV090x_P1_VTH56 STV090x_Px_VTH56(1) +#define STV090x_P2_VTH56 STV090x_Px_VTH56(2) +#define STV090x_OFFST_Px_VTH56_FIELD 0 +#define STV090x_WIDTH_Px_VTH56_FIELD 8 + +#define STV090x_Px_VTH67(__x) (0xf538 - (__x - 1) * 0x200) +#define STV090x_P1_VTH67 STV090x_Px_VTH67(1) +#define STV090x_P2_VTH67 STV090x_Px_VTH67(2) +#define STV090x_OFFST_Px_VTH67_FIELD 0 +#define STV090x_WIDTH_Px_VTH67_FIELD 8 + +#define STV090x_Px_VTH78(__x) (0xf539 - (__x - 1) * 0x200) +#define STV090x_P1_VTH78 STV090x_Px_VTH78(1) +#define STV090x_P2_VTH78 STV090x_Px_VTH78(2) +#define STV090x_OFFST_Px_VTH78_FIELD 0 +#define STV090x_WIDTH_Px_VTH78_FIELD 8 + +#define STV090x_Px_VITCURPUN(__x) (0xf53a - (__x - 1) * 0x200) +#define STV090x_P1_VITCURPUN STV090x_Px_VITCURPUN(1) +#define STV090x_P2_VITCURPUN STV090x_Px_VITCURPUN(2) +#define STV090x_OFFST_Px_VIT_CURPUN_FIELD 0 +#define STV090x_WIDTH_Px_VIT_CURPUN_FIELD 5 + +#define STV090x_Px_VERROR(__x) (0xf53b - (__x - 1) * 0x200) +#define STV090x_P1_VERROR STV090x_Px_VERROR(1) +#define STV090x_P2_VERROR STV090x_Px_VERROR(2) +#define STV090x_OFFST_Px_REGERR_VIT_FIELD 0 +#define STV090x_WIDTH_Px_REGERR_VIT_FIELD 8 + +#define STV090x_Px_PRVIT(__x) (0xf53c - (__x - 1) * 0x200) +#define STV090x_P1_PRVIT STV090x_Px_PRVIT(1) +#define STV090x_P2_PRVIT STV090x_Px_PRVIT(2) +#define STV090x_OFFST_Px_DIS_VTHLOCK_FIELD 6 +#define STV090x_WIDTH_Px_DIS_VTHLOCK_FIELD 1 +#define STV090x_OFFST_Px_E7_8VIT_FIELD 5 +#define STV090x_WIDTH_Px_E7_8VIT_FIELD 1 +#define STV090x_OFFST_Px_E6_7VIT_FIELD 4 +#define STV090x_WIDTH_Px_E6_7VIT_FIELD 1 +#define STV090x_OFFST_Px_E5_6VIT_FIELD 3 +#define STV090x_WIDTH_Px_E5_6VIT_FIELD 1 +#define STV090x_OFFST_Px_E3_4VIT_FIELD 2 +#define STV090x_WIDTH_Px_E3_4VIT_FIELD 1 +#define STV090x_OFFST_Px_E2_3VIT_FIELD 1 +#define STV090x_WIDTH_Px_E2_3VIT_FIELD 1 +#define STV090x_OFFST_Px_E1_2VIT_FIELD 0 +#define STV090x_WIDTH_Px_E1_2VIT_FIELD 1 + +#define STV090x_Px_VAVSRVIT(__x) (0xf53d - (__x - 1) * 0x200) +#define STV090x_P1_VAVSRVIT STV090x_Px_VAVSRVIT(1) +#define STV090x_P2_VAVSRVIT STV090x_Px_VAVSRVIT(2) +#define STV090x_OFFST_Px_SNVIT_FIELD 4 +#define STV090x_WIDTH_Px_SNVIT_FIELD 2 +#define STV090x_OFFST_Px_TOVVIT_FIELD 2 +#define STV090x_WIDTH_Px_TOVVIT_FIELD 2 +#define STV090x_OFFST_Px_HYPVIT_FIELD 0 +#define STV090x_WIDTH_Px_HYPVIT_FIELD 2 + +#define STV090x_Px_VSTATUSVIT(__x) (0xf53e - (__x - 1) * 0x200) +#define STV090x_P1_VSTATUSVIT STV090x_Px_VSTATUSVIT(1) +#define STV090x_P2_VSTATUSVIT STV090x_Px_VSTATUSVIT(2) +#define STV090x_OFFST_Px_PRFVIT_FIELD 4 +#define STV090x_WIDTH_Px_PRFVIT_FIELD 1 +#define STV090x_OFFST_Px_LOCKEDVIT_FIELD 3 +#define STV090x_WIDTH_Px_LOCKEDVIT_FIELD 1 + +#define STV090x_Px_VTHINUSE(__x) (0xf53f - (__x - 1) * 0x200) +#define STV090x_P1_VTHINUSE STV090x_Px_VTHINUSE(1) +#define STV090x_P2_VTHINUSE STV090x_Px_VTHINUSE(2) +#define STV090x_OFFST_Px_VIT_INUSE_FIELD 0 +#define STV090x_WIDTH_Px_VIT_INUSE_FIELD 8 + +#define STV090x_Px_KDIV12(__x) (0xf540 - (__x - 1) * 0x200) +#define STV090x_P1_KDIV12 STV090x_Px_KDIV12(1) +#define STV090x_P2_KDIV12 STV090x_Px_KDIV12(2) +#define STV090x_OFFST_Px_K_DIVIDER_12_FIELD 0 +#define STV090x_WIDTH_Px_K_DIVIDER_12_FIELD 7 + +#define STV090x_Px_KDIV23(__x) (0xf541 - (__x - 1) * 0x200) +#define STV090x_P1_KDIV23 STV090x_Px_KDIV23(1) +#define STV090x_P2_KDIV23 STV090x_Px_KDIV23(2) +#define STV090x_OFFST_Px_K_DIVIDER_23_FIELD 0 +#define STV090x_WIDTH_Px_K_DIVIDER_23_FIELD 7 + +#define STV090x_Px_KDIV34(__x) (0xf542 - (__x - 1) * 0x200) +#define STV090x_P1_KDIV34 STV090x_Px_KDIV34(1) +#define STV090x_P2_KDIV34 STV090x_Px_KDIV34(2) +#define STV090x_OFFST_Px_K_DIVIDER_34_FIELD 0 +#define STV090x_WIDTH_Px_K_DIVIDER_34_FIELD 7 + +#define STV090x_Px_KDIV56(__x) (0xf543 - (__x - 1) * 0x200) +#define STV090x_P1_KDIV56 STV090x_Px_KDIV56(1) +#define STV090x_P2_KDIV56 STV090x_Px_KDIV56(2) +#define STV090x_OFFST_Px_K_DIVIDER_56_FIELD 0 +#define STV090x_WIDTH_Px_K_DIVIDER_56_FIELD 7 + +#define STV090x_Px_KDIV67(__x) (0xf544 - (__x - 1) * 0x200) +#define STV090x_P1_KDIV67 STV090x_Px_KDIV67(1) +#define STV090x_P2_KDIV67 STV090x_Px_KDIV67(2) +#define STV090x_OFFST_Px_K_DIVIDER_67_FIELD 0 +#define STV090x_WIDTH_Px_K_DIVIDER_67_FIELD 7 + +#define STV090x_Px_KDIV78(__x) (0xf545 - (__x - 1) * 0x200) +#define STV090x_P1_KDIV78 STV090x_Px_KDIV78(1) +#define STV090x_P2_KDIV78 STV090x_Px_KDIV78(2) +#define STV090x_OFFST_Px_K_DIVIDER_78_FIELD 0 +#define STV090x_WIDTH_Px_K_DIVIDER_78_FIELD 7 + +#define STV090x_Px_PDELCTRL1(__x) (0xf550 - (__x - 1) * 0x200) +#define STV090x_P1_PDELCTRL1 STV090x_Px_PDELCTRL1(1) +#define STV090x_P2_PDELCTRL1 STV090x_Px_PDELCTRL1(2) +#define STV090x_OFFST_Px_INV_MISMASK_FIELD 7 +#define STV090x_WIDTH_Px_INV_MISMASK_FIELD 1 +#define STV090x_OFFST_Px_FILTER_EN_FIELD 5 +#define STV090x_WIDTH_Px_FILTER_EN_FIELD 1 +#define STV090x_OFFST_Px_EN_MIS00_FIELD 1 +#define STV090x_WIDTH_Px_EN_MIS00_FIELD 1 +#define STV090x_OFFST_Px_ALGOSWRST_FIELD 0 +#define STV090x_WIDTH_Px_ALGOSWRST_FIELD 1 + +#define STV090x_Px_PDELCTRL2(__x) (0xf551 - (__x - 1) * 0x200) +#define STV090x_P1_PDELCTRL2 STV090x_Px_PDELCTRL2(1) +#define STV090x_P2_PDELCTRL2 STV090x_Px_PDELCTRL2(2) +#define STV090x_OFFST_Px_FORCE_CONTINUOUS 7 +#define STV090x_WIDTH_Px_FORCE_CONTINUOUS 1 +#define STV090x_OFFST_Px_RESET_UPKO_COUNT 6 +#define STV090x_WIDTH_Px_RESET_UPKO_COUNT 1 +#define STV090x_OFFST_Px_USER_PKTDELIN_NB 5 +#define STV090x_WIDTH_Px_USER_PKTDELIN_NB 1 +#define STV090x_OFFST_Px_FORCE_LOCKED 4 +#define STV090x_WIDTH_Px_FORCE_LOCKED 1 +#define STV090x_OFFST_Px_DATA_UNBBSCRAM 3 +#define STV090x_WIDTH_Px_DATA_UNBBSCRAM 1 +#define STV090x_OFFST_Px_FORCE_LONGPACKET 2 +#define STV090x_WIDTH_Px_FORCE_LONGPACKET 1 +#define STV090x_OFFST_Px_FRAME_MODE_FIELD 1 +#define STV090x_WIDTH_Px_FRAME_MODE_FIELD 1 + +#define STV090x_Px_HYSTTHRESH(__x) (0xf554 - (__x - 1) * 0x200) +#define STV090x_P1_HYSTTHRESH STV090x_Px_HYSTTHRESH(1) +#define STV090x_P2_HYSTTHRESH STV090x_Px_HYSTTHRESH(2) +#define STV090x_OFFST_Px_UNLCK_THRESH_FIELD 4 +#define STV090x_WIDTH_Px_UNLCK_THRESH_FIELD 4 +#define STV090x_OFFST_Px_DELIN_LCK_THRESH_FIELD 0 +#define STV090x_WIDTH_Px_DELIN_LCK_THRESH_FIELD 4 + +#define STV090x_Px_ISIENTRY(__x) (0xf55e - (__x - 1) * 0x200) +#define STV090x_P1_ISIENTRY STV090x_Px_ISIENTRY(1) +#define STV090x_P2_ISIENTRY STV090x_Px_ISIENTRY(2) +#define STV090x_OFFST_Px_ISI_ENTRY_FIELD 0 +#define STV090x_WIDTH_Px_ISI_ENTRY_FIELD 8 + +#define STV090x_Px_ISIBITENA(__x) (0xf55f - (__x - 1) * 0x200) +#define STV090x_P1_ISIBITENA STV090x_Px_ISIBITENA(1) +#define STV090x_P2_ISIBITENA STV090x_Px_ISIBITENA(2) +#define STV090x_OFFST_Px_ISI_BIT_EN_FIELD 0 +#define STV090x_WIDTH_Px_ISI_BIT_EN_FIELD 8 + +#define STV090x_Px_MATSTRy(__x, __y) (0xf561 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_MATSTR0 STV090x_Px_MATSTRy(1, 0) +#define STV090x_P1_MATSTR1 STV090x_Px_MATSTRy(1, 1) +#define STV090x_P2_MATSTR0 STV090x_Px_MATSTRy(2, 0) +#define STV090x_P2_MATSTR1 STV090x_Px_MATSTRy(2, 1) +#define STV090x_OFFST_Px_MATYPE_CURRENT_FIELD 0 +#define STV090x_WIDTH_Px_MATYPE_CURRENT_FIELD 8 + +#define STV090x_Px_UPLSTRy(__x, __y) (0xf563 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_UPLSTR0 STV090x_Px_UPLSTRy(1, 0) +#define STV090x_P1_UPLSTR1 STV090x_Px_UPLSTRy(1, 1) +#define STV090x_P2_UPLSTR0 STV090x_Px_UPLSTRy(2, 0) +#define STV090x_P2_UPLSTR1 STV090x_Px_UPLSTRy(2, 1) +#define STV090x_OFFST_Px_UPL_CURRENT_FIELD 0 +#define STV090x_WIDTH_Px_UPL_CURRENT_FIELD 8 + +#define STV090x_Px_DFLSTRy(__x, __y) (0xf565 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_DFLSTR0 STV090x_Px_DFLSTRy(1, 0) +#define STV090x_P1_DFLSTR1 STV090x_Px_DFLSTRy(1, 1) +#define STV090x_P2_DFLSTR0 STV090x_Px_DFLSTRy(2, 0) +#define STV090x_P2_DFLSTR1 STV090x_Px_DFLSTRy(2, 1) +#define STV090x_OFFST_Px_DFL_CURRENT_FIELD 0 +#define STV090x_WIDTH_Px_DFL_CURRENT_FIELD 8 + +#define STV090x_Px_SYNCSTR(__x) (0xf566 - (__x - 1) * 0x200) +#define STV090x_P1_SYNCSTR STV090x_Px_SYNCSTR(1) +#define STV090x_P2_SYNCSTR STV090x_Px_SYNCSTR(2) +#define STV090x_OFFST_Px_SYNC_CURRENT_FIELD 0 +#define STV090x_WIDTH_Px_SYNC_CURRENT_FIELD 8 + +#define STV090x_Px_SYNCDSTRy(__x, __y) (0xf568 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_SYNCDSTR0 STV090x_Px_SYNCDSTRy(1, 0) +#define STV090x_P1_SYNCDSTR1 STV090x_Px_SYNCDSTRy(1, 1) +#define STV090x_P2_SYNCDSTR0 STV090x_Px_SYNCDSTRy(2, 0) +#define STV090x_P2_SYNCDSTR1 STV090x_Px_SYNCDSTRy(2, 1) +#define STV090x_OFFST_Px_SYNCD_CURRENT_FIELD 0 +#define STV090x_WIDTH_Px_SYNCD_CURRENT_FIELD 8 + +#define STV090x_Px_PDELSTATUS1(__x) (0xf569 - (__x - 1) * 0x200) +#define STV090x_P1_PDELSTATUS1 STV090x_Px_PDELSTATUS1(1) +#define STV090x_P2_PDELSTATUS1 STV090x_Px_PDELSTATUS1(2) +#define STV090x_OFFST_Px_PKTDELIN_LOCK_FIELD 1 +#define STV090x_WIDTH_Px_PKTDELIN_LOCK_FIELD 1 +#define STV090x_OFFST_Px_FIRST_LOCK_FIELD 0 +#define STV090x_WIDTH_Px_FIRST_LOCK_FIELD 1 + +#define STV090x_Px_PDELSTATUS2(__x) (0xf56a - (__x - 1) * 0x200) +#define STV090x_P1_PDELSTATUS2 STV090x_Px_PDELSTATUS2(1) +#define STV090x_P2_PDELSTATUS2 STV090x_Px_PDELSTATUS2(2) +#define STV090x_OFFST_Px_FRAME_MODCOD_FIELD 2 +#define STV090x_WIDTH_Px_FRAME_MODCOD_FIELD 5 +#define STV090x_OFFST_Px_FRAME_TYPE_FIELD 0 +#define STV090x_WIDTH_Px_FRAME_TYPE_FIELD 2 + +#define STV090x_Px_BBFCRCKO1(__x) (0xf56b - (__x - 1) * 0x200) +#define STV090x_P1_BBFCRCKO1 STV090x_Px_BBFCRCKO1(1) +#define STV090x_P2_BBFCRCKO1 STV090x_Px_BBFCRCKO1(2) +#define STV090x_OFFST_Px_BBHCRC_KOCNT_FIELD 0 +#define STV090x_WIDTH_Px_BBHCRC_KOCNT_FIELD 8 + +#define STV090x_Px_BBFCRCKO0(__x) (0xf56c - (__x - 1) * 0x200) +#define STV090x_P1_BBFCRCKO0 STV090x_Px_BBFCRCKO0(1) +#define STV090x_P2_BBFCRCKO0 STV090x_Px_BBFCRCKO0(2) +#define STV090x_OFFST_Px_BBHCRC_KOCNT_FIELD 0 +#define STV090x_WIDTH_Px_BBHCRC_KOCNT_FIELD 8 + +#define STV090x_Px_UPCRCKO1(__x) (0xf56d - (__x - 1) * 0x200) +#define STV090x_P1_UPCRCKO1 STV090x_Px_UPCRCKO1(1) +#define STV090x_P2_UPCRCKO1 STV090x_Px_UPCRCKO1(2) +#define STV090x_OFFST_Px_PKTCRC_KOCNT_FIELD 0 +#define STV090x_WIDTH_Px_PKTCRC_KOCNT_FIELD 8 + +#define STV090x_Px_UPCRCKO0(__x) (0xf56e - (__x - 1) * 0x200) +#define STV090x_P1_UPCRCKO0 STV090x_Px_UPCRCKO0(1) +#define STV090x_P2_UPCRCKO0 STV090x_Px_UPCRCKO0(2) +#define STV090x_OFFST_Px_PKTCRC_KOCNT_FIELD 0 +#define STV090x_WIDTH_Px_PKTCRC_KOCNT_FIELD 8 + +#define STV090x_NBITER_NFx(__x) (0xFA03 + (__x - 4) * 0x1) +#define STV090x_NBITER_NF4 STV090x_NBITER_NFx(4) +#define STV090x_NBITER_NF5 STV090x_NBITER_NFx(5) +#define STV090x_NBITER_NF6 STV090x_NBITER_NFx(6) +#define STV090x_NBITER_NF7 STV090x_NBITER_NFx(7) +#define STV090x_NBITER_NF8 STV090x_NBITER_NFx(8) +#define STV090x_NBITER_NF9 STV090x_NBITER_NFx(9) +#define STV090x_NBITER_NF10 STV090x_NBITER_NFx(10) +#define STV090x_NBITER_NF11 STV090x_NBITER_NFx(11) +#define STV090x_NBITER_NF12 STV090x_NBITER_NFx(12) +#define STV090x_NBITER_NF13 STV090x_NBITER_NFx(13) +#define STV090x_NBITER_NF14 STV090x_NBITER_NFx(14) +#define STV090x_NBITER_NF15 STV090x_NBITER_NFx(15) +#define STV090x_NBITER_NF16 STV090x_NBITER_NFx(16) +#define STV090x_NBITER_NF17 STV090x_NBITER_NFx(17) + +#define STV090x_NBITERNOERR 0xFA3F +#define STV090x_OFFST_NBITER_STOP_CRIT_FIELD 0 +#define STV090x_WIDTH_NBITER_STOP_CRIT_FIELD 4 + +#define STV090x_GAINLLR_NFx(__x) (0xFA43 + (__x - 4) * 0x1) +#define STV090x_GAINLLR_NF4 STV090x_GAINLLR_NFx(4) +#define STV090x_OFFST_GAINLLR_NF_QP_1_2_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_QP_1_2_FIELD 7 + +#define STV090x_GAINLLR_NF5 STV090x_GAINLLR_NFx(5) +#define STV090x_OFFST_GAINLLR_NF_QP_3_5_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_QP_3_5_FIELD 7 + +#define STV090x_GAINLLR_NF6 STV090x_GAINLLR_NFx(6) +#define STV090x_OFFST_GAINLLR_NF_QP_2_3_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_QP_2_3_FIELD 7 + +#define STV090x_GAINLLR_NF7 STV090x_GAINLLR_NFx(7) +#define STV090x_OFFST_GAINLLR_NF_QP_3_4_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_QP_3_4_FIELD 7 + +#define STV090x_GAINLLR_NF8 STV090x_GAINLLR_NFx(8) +#define STV090x_OFFST_GAINLLR_NF_QP_4_5_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_QP_4_5_FIELD 7 + +#define STV090x_GAINLLR_NF9 STV090x_GAINLLR_NFx(9) +#define STV090x_OFFST_GAINLLR_NF_QP_5_6_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_QP_5_6_FIELD 7 + +#define STV090x_GAINLLR_NF10 STV090x_GAINLLR_NFx(10) +#define STV090x_OFFST_GAINLLR_NF_QP_8_9_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_QP_8_9_FIELD 7 + +#define STV090x_GAINLLR_NF11 STV090x_GAINLLR_NFx(11) +#define STV090x_OFFST_GAINLLR_NF_QP_9_10_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_QP_9_10_FIELD 7 + +#define STV090x_GAINLLR_NF12 STV090x_GAINLLR_NFx(12) +#define STV090x_OFFST_GAINLLR_NF_8P_3_5_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_8P_3_5_FIELD 7 + +#define STV090x_GAINLLR_NF13 STV090x_GAINLLR_NFx(13) +#define STV090x_OFFST_GAINLLR_NF_8P_2_3_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_8P_2_3_FIELD 7 + +#define STV090x_GAINLLR_NF14 STV090x_GAINLLR_NFx(14) +#define STV090x_OFFST_GAINLLR_NF_8P_3_4_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_8P_3_4_FIELD 7 + +#define STV090x_GAINLLR_NF15 STV090x_GAINLLR_NFx(15) +#define STV090x_OFFST_GAINLLR_NF_8P_5_6_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_8P_5_6_FIELD 7 + +#define STV090x_GAINLLR_NF16 STV090x_GAINLLR_NFx(16) +#define STV090x_OFFST_GAINLLR_NF_8P_8_9_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_8P_8_9_FIELD 7 + +#define STV090x_GAINLLR_NF17 STV090x_GAINLLR_NFx(17) +#define STV090x_OFFST_GAINLLR_NF_8P_9_10_FIELD 0 +#define STV090x_WIDTH_GAINLLR_NF_8P_9_10_FIELD 7 + +#define STV090x_GENCFG 0xFA86 +#define STV090x_OFFST_BROADCAST_FIELD 4 +#define STV090x_WIDTH_BROADCAST_FIELD 1 +#define STV090x_OFFST_PRIORITY_FIELD 1 +#define STV090x_WIDTH_PRIORITY_FIELD 1 +#define STV090x_OFFST_DDEMOD_FIELD 0 +#define STV090x_WIDTH_DDEMOD_FIELD 1 + +#define STV090x_LDPCERRx(__x) (0xFA97 - (__x * 0x1)) +#define STV090x_LDPCERR0 STV090x_LDPCERRx(0) +#define STV090x_LDPCERR1 STV090x_LDPCERRx(1) +#define STV090x_OFFST_Px_LDPC_ERRORS_COUNTER_FIELD 0 +#define STV090x_WIDTH_Px_LDPC_ERRORS_COUNTER_FIELD 8 + +#define STV090x_BCHERR 0xFA98 +#define STV090x_OFFST_Px_ERRORFLAG_FIELD 4 +#define STV090x_WIDTH_Px_ERRORFLAG_FIELD 1 +#define STV090x_OFFST_Px_BCH_ERRORS_COUNTER_FIELD 0 +#define STV090x_WIDTH_Px_BCH_ERRORS_COUNTER_FIELD 4 + +#define STV090x_Px_TSSTATEM(__x) (0xF570 - (__x - 1) * 0x200) +#define STV090x_P1_TSSTATEM STV090x_Px_TSSTATEM(1) +#define STV090x_P2_TSSTATEM STV090x_Px_TSSTATEM(2) +#define STV090x_OFFST_Px_TSDIL_ON_FIELD 7 +#define STV090x_WIDTH_Px_TSDIL_ON_FIELD 1 +#define STV090x_OFFST_Px_TSRS_ON_FIELD 5 +#define STV090x_WIDTH_Px_TSRS_ON_FIELD 1 + +#define STV090x_Px_TSCFGH(__x) (0xF572 - (__x - 1) * 0x200) +#define STV090x_P1_TSCFGH STV090x_Px_TSCFGH(1) +#define STV090x_P2_TSCFGH STV090x_Px_TSCFGH(2) +#define STV090x_OFFST_Px_TSFIFO_DVBCI_FIELD 7 +#define STV090x_WIDTH_Px_TSFIFO_DVBCI_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_SERIAL_FIELD 6 +#define STV090x_WIDTH_Px_TSFIFO_SERIAL_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_TEIUPDATE_FIELD 5 +#define STV090x_WIDTH_Px_TSFIFO_TEIUPDATE_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_DUTY50_FIELD 4 +#define STV090x_WIDTH_Px_TSFIFO_DUTY50_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_HSGNLOUT_FIELD 3 +#define STV090x_WIDTH_Px_TSFIFO_HSGNLOUT_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_ERRORMODE_FIELD 1 +#define STV090x_WIDTH_Px_TSFIFO_ERRORMODE_FIELD 2 +#define STV090x_OFFST_Px_RST_HWARE_FIELD 0 +#define STV090x_WIDTH_Px_RST_HWARE_FIELD 1 + +#define STV090x_Px_TSCFGM(__x) (0xF573 - (__x - 1) * 0x200) +#define STV090x_P1_TSCFGM STV090x_Px_TSCFGM(1) +#define STV090x_P2_TSCFGM STV090x_Px_TSCFGM(2) +#define STV090x_OFFST_Px_TSFIFO_MANSPEED_FIELD 6 +#define STV090x_WIDTH_Px_TSFIFO_MANSPEED_FIELD 2 +#define STV090x_OFFST_Px_TSFIFO_PERMDATA_FIELD 5 +#define STV090x_WIDTH_Px_TSFIFO_PERMDATA_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_INVDATA_FIELD 0 +#define STV090x_WIDTH_Px_TSFIFO_INVDATA_FIELD 1 + +#define STV090x_Px_TSCFGL(__x) (0xF574 - (__x - 1) * 0x200) +#define STV090x_P1_TSCFGL STV090x_Px_TSCFGL(1) +#define STV090x_P2_TSCFGL STV090x_Px_TSCFGL(2) +#define STV090x_OFFST_Px_TSFIFO_BCLKDEL1CK_FIELD 6 +#define STV090x_WIDTH_Px_TSFIFO_BCLKDEL1CK_FIELD 2 +#define STV090x_OFFST_Px_BCHERROR_MODE_FIELD 4 +#define STV090x_WIDTH_Px_BCHERROR_MODE_FIELD 2 +#define STV090x_OFFST_Px_TSFIFO_NSGNL2DATA_FIELD 3 +#define STV090x_WIDTH_Px_TSFIFO_NSGNL2DATA_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_EMBINDVB_FIELD 2 +#define STV090x_WIDTH_Px_TSFIFO_EMBINDVB_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_DPUNACT_FIELD 1 +#define STV090x_WIDTH_Px_TSFIFO_DPUNACT_FIELD 1 + +#define STV090x_Px_TSINSDELH(__x) (0xF576 - (__x - 1) * 0x200) +#define STV090x_P1_TSINSDELH STV090x_Px_TSINSDELH(1) +#define STV090x_P2_TSINSDELH STV090x_Px_TSINSDELH(2) +#define STV090x_OFFST_Px_TSDEL_SYNCBYTE_FIELD 7 +#define STV090x_WIDTH_Px_TSDEL_SYNCBYTE_FIELD 1 +#define STV090x_OFFST_Px_TSDEL_XXHEADER_FIELD 6 +#define STV090x_WIDTH_Px_TSDEL_XXHEADER_FIELD 1 + +#define STV090x_Px_TSSPEED(__x) (0xF580 - (__x - 1) * 0x200) +#define STV090x_P1_TSSPEED STV090x_Px_TSSPEED(1) +#define STV090x_P2_TSSPEED STV090x_Px_TSSPEED(2) +#define STV090x_OFFST_Px_TSFIFO_OUTSPEED_FIELD 0 +#define STV090x_WIDTH_Px_TSFIFO_OUTSPEED_FIELD 8 + +#define STV090x_Px_TSSTATUS(__x) (0xF581 - (__x - 1) * 0x200) +#define STV090x_P1_TSSTATUS STV090x_Px_TSSTATUS(1) +#define STV090x_P2_TSSTATUS STV090x_Px_TSSTATUS(2) +#define STV090x_OFFST_Px_TSFIFO_LINEOK_FIELD 7 +#define STV090x_WIDTH_Px_TSFIFO_LINEOK_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_ERROR_FIELD 6 +#define STV090x_WIDTH_Px_TSFIFO_ERROR_FIELD 1 + +#define STV090x_Px_TSSTATUS2(__x) (0xF582 - (__x - 1) * 0x200) +#define STV090x_P1_TSSTATUS2 STV090x_Px_TSSTATUS2(1) +#define STV090x_P2_TSSTATUS2 STV090x_Px_TSSTATUS2(2) +#define STV090x_OFFST_Px_TSFIFO_DEMODSEL_FIELD 7 +#define STV090x_WIDTH_Px_TSFIFO_DEMODSEL_FIELD 1 +#define STV090x_OFFST_Px_TSFIFOSPEED_STORE_FIELD 6 +#define STV090x_WIDTH_Px_TSFIFOSPEED_STORE_FIELD 1 +#define STV090x_OFFST_Px_DILXX_RESET_FIELD 5 +#define STV090x_WIDTH_Px_DILXX_RESET_FIELD 1 +#define STV090x_OFFST_Px_TSSERIAL_IMPOS_FIELD 4 +#define STV090x_WIDTH_Px_TSSERIAL_IMPOS_FIELD 1 +#define STV090x_OFFST_Px_SCRAMBDETECT_FIELD 1 +#define STV090x_WIDTH_Px_SCRAMBDETECT_FIELD 1 + +#define STV090x_Px_TSBITRATEy(__x, __y) (0xF584 - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_TSBITRATE0 STV090x_Px_TSBITRATEy(1, 0) +#define STV090x_P1_TSBITRATE1 STV090x_Px_TSBITRATEy(1, 1) +#define STV090x_P2_TSBITRATE0 STV090x_Px_TSBITRATEy(2, 0) +#define STV090x_P2_TSBITRATE1 STV090x_Px_TSBITRATEy(2, 1) +#define STV090x_OFFST_Px_TSFIFO_BITRATE_FIELD 0 +#define STV090x_WIDTH_Px_TSFIFO_BITRATE_FIELD 8 + +#define STV090x_Px_ERRCTRL1(__x) (0xF598 - (__x - 1) * 0x200) +#define STV090x_P1_ERRCTRL1 STV090x_Px_ERRCTRL1(1) +#define STV090x_P2_ERRCTRL1 STV090x_Px_ERRCTRL1(2) +#define STV090x_OFFST_Px_ERR_SOURCE_FIELD 4 +#define STV090x_WIDTH_Px_ERR_SOURCE_FIELD 4 +#define STV090x_OFFST_Px_NUM_EVENT_FIELD 0 +#define STV090x_WIDTH_Px_NUM_EVENT_FIELD 3 + +#define STV090x_Px_ERRCNT12(__x) (0xF599 - (__x - 1) * 0x200) +#define STV090x_P1_ERRCNT12 STV090x_Px_ERRCNT12(1) +#define STV090x_P2_ERRCNT12 STV090x_Px_ERRCNT12(2) +#define STV090x_OFFST_Px_ERRCNT1_OLDVALUE_FIELD 7 +#define STV090x_WIDTH_Px_ERRCNT1_OLDVALUE_FIELD 1 +#define STV090x_OFFST_Px_ERR_CNT12_FIELD 0 +#define STV090x_WIDTH_Px_ERR_CNT12_FIELD 7 + +#define STV090x_Px_ERRCNT11(__x) (0xF59A - (__x - 1) * 0x200) +#define STV090x_P1_ERRCNT11 STV090x_Px_ERRCNT11(1) +#define STV090x_P2_ERRCNT11 STV090x_Px_ERRCNT11(2) +#define STV090x_OFFST_Px_ERR_CNT11_FIELD 0 +#define STV090x_WIDTH_Px_ERR_CNT11_FIELD 8 + +#define STV090x_Px_ERRCNT10(__x) (0xF59B - (__x - 1) * 0x200) +#define STV090x_P1_ERRCNT10 STV090x_Px_ERRCNT10(1) +#define STV090x_P2_ERRCNT10 STV090x_Px_ERRCNT10(2) +#define STV090x_OFFST_Px_ERR_CNT10_FIELD 0 +#define STV090x_WIDTH_Px_ERR_CNT10_FIELD 8 + +#define STV090x_Px_ERRCTRL2(__x) (0xF59C - (__x - 1) * 0x200) +#define STV090x_P1_ERRCTRL2 STV090x_Px_ERRCTRL2(1) +#define STV090x_P2_ERRCTRL2 STV090x_Px_ERRCTRL2(2) +#define STV090x_OFFST_Px_ERR_SOURCE2_FIELD 4 +#define STV090x_WIDTH_Px_ERR_SOURCE2_FIELD 4 +#define STV090x_OFFST_Px_NUM_EVENT2_FIELD 0 +#define STV090x_WIDTH_Px_NUM_EVENT2_FIELD 3 + +#define STV090x_Px_ERRCNT22(__x) (0xF59D - (__x - 1) * 0x200) +#define STV090x_P1_ERRCNT22 STV090x_Px_ERRCNT22(1) +#define STV090x_P2_ERRCNT22 STV090x_Px_ERRCNT22(2) +#define STV090x_OFFST_Px_ERRCNT2_OLDVALUE_FIELD 7 +#define STV090x_WIDTH_Px_ERRCNT2_OLDVALUE_FIELD 1 +#define STV090x_OFFST_Px_ERR_CNT2_FIELD 0 +#define STV090x_WIDTH_Px_ERR_CNT2_FIELD 7 + +#define STV090x_Px_ERRCNT21(__x) (0xF59E - (__x - 1) * 0x200) +#define STV090x_P1_ERRCNT21 STV090x_Px_ERRCNT21(1) +#define STV090x_P2_ERRCNT21 STV090x_Px_ERRCNT21(2) +#define STV090x_OFFST_Px_ERR_CNT21_FIELD 0 +#define STV090x_WIDTH_Px_ERR_CNT21_FIELD 8 + +#define STV090x_Px_ERRCNT20(__x) (0xF59F - (__x - 1) * 0x200) +#define STV090x_P1_ERRCNT20 STV090x_Px_ERRCNT20(1) +#define STV090x_P2_ERRCNT20 STV090x_Px_ERRCNT20(2) +#define STV090x_OFFST_Px_ERR_CNT20_FIELD 0 +#define STV090x_WIDTH_Px_ERR_CNT20_FIELD 8 + +#define STV090x_Px_FECSPY(__x) (0xF5A0 - (__x - 1) * 0x200) +#define STV090x_P1_FECSPY STV090x_Px_FECSPY(1) +#define STV090x_P2_FECSPY STV090x_Px_FECSPY(2) +#define STV090x_OFFST_Px_SPY_ENABLE_FIELD 7 +#define STV090x_WIDTH_Px_SPY_ENABLE_FIELD 1 +#define STV090x_OFFST_Px_BERMETER_DATAMAODE_FIELD 2 +#define STV090x_WIDTH_Px_BERMETER_DATAMAODE_FIELD 2 + +#define STV090x_Px_FSPYCFG(__x) (0xF5A1 - (__x - 1) * 0x200) +#define STV090x_P1_FSPYCFG STV090x_Px_FSPYCFG(1) +#define STV090x_P2_FSPYCFG STV090x_Px_FSPYCFG(2) +#define STV090x_OFFST_Px_RST_ON_ERROR_FIELD 5 +#define STV090x_WIDTH_Px_RST_ON_ERROR_FIELD 1 +#define STV090x_OFFST_Px_ONE_SHOT_FIELD 4 +#define STV090x_WIDTH_Px_ONE_SHOT_FIELD 1 +#define STV090x_OFFST_Px_I2C_MODE_FIELD 2 +#define STV090x_WIDTH_Px_I2C_MODE_FIELD 2 + +#define STV090x_Px_FSPYDATA(__x) (0xF5A2 - (__x - 1) * 0x200) +#define STV090x_P1_FSPYDATA STV090x_Px_FSPYDATA(1) +#define STV090x_P2_FSPYDATA STV090x_Px_FSPYDATA(2) +#define STV090x_OFFST_Px_SPY_STUFFING_FIELD 7 +#define STV090x_WIDTH_Px_SPY_STUFFING_FIELD 1 +#define STV090x_OFFST_Px_SPY_CNULLPKT_FIELD 5 +#define STV090x_WIDTH_Px_SPY_CNULLPKT_FIELD 1 +#define STV090x_OFFST_Px_SPY_OUTDATA_MODE_FIELD 0 +#define STV090x_WIDTH_Px_SPY_OUTDATA_MODE_FIELD 5 + +#define STV090x_Px_FSPYOUT(__x) (0xF5A3 - (__x - 1) * 0x200) +#define STV090x_P1_FSPYOUT STV090x_Px_FSPYOUT(1) +#define STV090x_P2_FSPYOUT STV090x_Px_FSPYOUT(2) +#define STV090x_OFFST_Px_FSPY_DIRECT_FIELD 7 +#define STV090x_WIDTH_Px_FSPY_DIRECT_FIELD 1 +#define STV090x_OFFST_Px_STUFF_MODE_FIELD 0 +#define STV090x_WIDTH_Px_STUFF_MODE_FIELD 3 + +#define STV090x_Px_FSTATUS(__x) (0xF5A4 - (__x - 1) * 0x200) +#define STV090x_P1_FSTATUS STV090x_Px_FSTATUS(1) +#define STV090x_P2_FSTATUS STV090x_Px_FSTATUS(2) +#define STV090x_OFFST_Px_SPY_ENDSIM_FIELD 7 +#define STV090x_WIDTH_Px_SPY_ENDSIM_FIELD 1 +#define STV090x_OFFST_Px_VALID_SIM_FIELD 6 +#define STV090x_WIDTH_Px_VALID_SIM_FIELD 1 +#define STV090x_OFFST_Px_FOUND_SIGNAL_FIELD 5 +#define STV090x_WIDTH_Px_FOUND_SIGNAL_FIELD 1 +#define STV090x_OFFST_Px_DSS_SYNCBYTE_FIELD 4 +#define STV090x_WIDTH_Px_DSS_SYNCBYTE_FIELD 1 +#define STV090x_OFFST_Px_RESULT_STATE_FIELD 0 +#define STV090x_WIDTH_Px_RESULT_STATE_FIELD 4 + +#define STV090x_Px_FBERCPT4(__x) (0xF5A8 - (__x - 1) * 0x200) +#define STV090x_P1_FBERCPT4 STV090x_Px_FBERCPT4(1) +#define STV090x_P2_FBERCPT4 STV090x_Px_FBERCPT4(2) +#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD 0 +#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD 8 + +#define STV090x_Px_FBERCPT3(__x) (0xF5A9 - (__x - 1) * 0x200) +#define STV090x_P1_FBERCPT3 STV090x_Px_FBERCPT3(1) +#define STV090x_P2_FBERCPT3 STV090x_Px_FBERCPT3(2) +#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD 0 +#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD 8 + +#define STV090x_Px_FBERCPT2(__x) (0xF5AA - (__x - 1) * 0x200) +#define STV090x_P1_FBERCPT2 STV090x_Px_FBERCPT2(1) +#define STV090x_P2_FBERCPT2 STV090x_Px_FBERCPT2(2) +#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD 0 +#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD 8 + +#define STV090x_Px_FBERCPT1(__x) (0xF5AB - (__x - 1) * 0x200) +#define STV090x_P1_FBERCPT1 STV090x_Px_FBERCPT1(1) +#define STV090x_P2_FBERCPT1 STV090x_Px_FBERCPT1(2) +#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD 0 +#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD 8 + +#define STV090x_Px_FBERCPT0(__x) (0xF5AC - (__x - 1) * 0x200) +#define STV090x_P1_FBERCPT0 STV090x_Px_FBERCPT0(1) +#define STV090x_P2_FBERCPT0 STV090x_Px_FBERCPT0(2) +#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD 0 +#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD 8 + +#define STV090x_Px_FBERERRy(__x, __y) (0xF5AF - (__x - 1) * 0x200 - __y * 0x1) +#define STV090x_P1_FBERERR0 STV090x_Px_FBERERRy(1, 0) +#define STV090x_P1_FBERERR1 STV090x_Px_FBERERRy(1, 1) +#define STV090x_P1_FBERERR2 STV090x_Px_FBERERRy(1, 2) +#define STV090x_P2_FBERERR0 STV090x_Px_FBERERRy(2, 0) +#define STV090x_P2_FBERERR1 STV090x_Px_FBERERRy(2, 1) +#define STV090x_P2_FBERERR2 STV090x_Px_FBERERRy(2, 2) +#define STV090x_OFFST_Px_FBERMETER_CPT_ERR_FIELD 0 +#define STV090x_WIDTH_Px_FBERMETER_CPT_ERR_FIELD 8 + +#define STV090x_Px_FSPYBER(__x) (0xF5B2 - (__x - 1) * 0x200) +#define STV090x_P1_FSPYBER STV090x_Px_FSPYBER(1) +#define STV090x_P2_FSPYBER STV090x_Px_FSPYBER(2) +#define STV090x_OFFST_Px_FSPYBER_SYNCBYTE_FIELD 4 +#define STV090x_WIDTH_Px_FSPYBER_SYNCBYTE_FIELD 1 +#define STV090x_OFFST_Px_FSPYBER_UNSYNC_FIELD 3 +#define STV090x_WIDTH_Px_FSPYBER_UNSYNC_FIELD 1 +#define STV090x_OFFST_Px_FSPYBER_CTIME_FIELD 0 +#define STV090x_WIDTH_Px_FSPYBER_CTIME_FIELD 3 + +#define STV090x_RCCFGH 0xf600 + +#define STV090x_TSGENERAL 0xF630 +#define STV090x_OFFST_Px_MUXSTREAM_OUT_FIELD 3 +#define STV090x_WIDTH_Px_MUXSTREAM_OUT_FIELD 1 +#define STV090x_OFFST_Px_TSFIFO_PERMPARAL_FIELD 1 +#define STV090x_WIDTH_Px_TSFIFO_PERMPARAL_FIELD 2 + +#define STV090x_TSGENERAL1X 0xf670 +#define STV090x_CFGEXT 0xfa80 + +#define STV090x_TSTRES0 0xFF11 +#define STV090x_OFFST_FRESFEC_FIELD 7 +#define STV090x_WIDTH_FRESFEC_FIELD 1 + +#define STV090x_Px_TSTDISRX(__x) (0xFF67 - (__x - 1) * 0x2) +#define STV090x_P1_TSTDISRX STV090x_Px_TSTDISRX(1) +#define STV090x_P2_TSTDISRX STV090x_Px_TSTDISRX(2) +#define STV090x_OFFST_Px_TSTDISRX_SELECT_FIELD 3 +#define STV090x_WIDTH_Px_TSTDISRX_SELECT_FIELD 1 + +#endif /* __STV090x_REG_H */ diff --git a/drivers/media/dvb-frontends/stv6110.c b/drivers/media/dvb-frontends/stv6110.c new file mode 100644 index 00000000..b1425830 --- /dev/null +++ b/drivers/media/dvb-frontends/stv6110.c @@ -0,0 +1,461 @@ +/* + * stv6110.c + * + * Driver for ST STV6110 satellite tuner IC. + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include + +#include "stv6110.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +static int debug; + +struct stv6110_priv { + int i2c_address; + struct i2c_adapter *i2c; + + u32 mclk; + u8 clk_div; + u8 gain; + u8 regs[8]; +}; + +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG args); \ + } while (0) + +static s32 abssub(s32 a, s32 b) +{ + if (a > b) + return a - b; + else + return b - a; +}; + +static int stv6110_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int stv6110_write_regs(struct dvb_frontend *fe, u8 buf[], + int start, int len) +{ + struct stv6110_priv *priv = fe->tuner_priv; + int rc; + u8 cmdbuf[MAX_XFER_SIZE]; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = cmdbuf, + .len = len + 1 + }; + + dprintk("%s\n", __func__); + + if (1 + len > sizeof(cmdbuf)) { + printk(KERN_WARNING + "%s: i2c wr: len=%d is too big!\n", + KBUILD_MODNAME, len); + return -EINVAL; + } + + if (start + len > 8) + return -EINVAL; + + memcpy(&cmdbuf[1], buf, len); + cmdbuf[0] = start; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + rc = i2c_transfer(priv->i2c, &msg, 1); + if (rc != 1) + dprintk("%s: i2c error\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int stv6110_read_regs(struct dvb_frontend *fe, u8 regs[], + int start, int len) +{ + struct stv6110_priv *priv = fe->tuner_priv; + int rc; + u8 reg[] = { start }; + struct i2c_msg msg[] = { + { + .addr = priv->i2c_address, + .flags = 0, + .buf = reg, + .len = 1, + }, { + .addr = priv->i2c_address, + .flags = I2C_M_RD, + .buf = regs, + .len = len, + }, + }; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + rc = i2c_transfer(priv->i2c, msg, 2); + if (rc != 2) + dprintk("%s: i2c error\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + memcpy(&priv->regs[start], regs, len); + + return 0; +} + +static int stv6110_read_reg(struct dvb_frontend *fe, int start) +{ + u8 buf[] = { 0 }; + stv6110_read_regs(fe, buf, start, 1); + + return buf[0]; +} + +static int stv6110_sleep(struct dvb_frontend *fe) +{ + u8 reg[] = { 0 }; + stv6110_write_regs(fe, reg, 0, 1); + + return 0; +} + +static u32 carrier_width(u32 symbol_rate, fe_rolloff_t rolloff) +{ + u32 rlf; + + switch (rolloff) { + case ROLLOFF_20: + rlf = 20; + break; + case ROLLOFF_25: + rlf = 25; + break; + default: + rlf = 35; + break; + } + + return symbol_rate + ((symbol_rate * rlf) / 100); +} + +static int stv6110_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth) +{ + struct stv6110_priv *priv = fe->tuner_priv; + u8 r8, ret = 0x04; + int i; + + if ((bandwidth / 2) > 36000000) /*BW/2 max=31+5=36 mhz for r8=31*/ + r8 = 31; + else if ((bandwidth / 2) < 5000000) /* BW/2 min=5Mhz for F=0 */ + r8 = 0; + else /*if 5 < BW/2 < 36*/ + r8 = (bandwidth / 2) / 1000000 - 5; + + /* ctrl3, RCCLKOFF = 0 Activate the calibration Clock */ + /* ctrl3, CF = r8 Set the LPF value */ + priv->regs[RSTV6110_CTRL3] &= ~((1 << 6) | 0x1f); + priv->regs[RSTV6110_CTRL3] |= (r8 & 0x1f); + stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL3], RSTV6110_CTRL3, 1); + /* stat1, CALRCSTRT = 1 Start LPF auto calibration*/ + priv->regs[RSTV6110_STAT1] |= 0x02; + stv6110_write_regs(fe, &priv->regs[RSTV6110_STAT1], RSTV6110_STAT1, 1); + + i = 0; + /* Wait for CALRCSTRT == 0 */ + while ((i < 10) && (ret != 0)) { + ret = ((stv6110_read_reg(fe, RSTV6110_STAT1)) & 0x02); + mdelay(1); /* wait for LPF auto calibration */ + i++; + } + + /* RCCLKOFF = 1 calibration done, desactivate the calibration Clock */ + priv->regs[RSTV6110_CTRL3] |= (1 << 6); + stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL3], RSTV6110_CTRL3, 1); + return 0; +} + +static int stv6110_init(struct dvb_frontend *fe) +{ + struct stv6110_priv *priv = fe->tuner_priv; + u8 buf0[] = { 0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e }; + + memcpy(priv->regs, buf0, 8); + /* K = (Reference / 1000000) - 16 */ + priv->regs[RSTV6110_CTRL1] &= ~(0x1f << 3); + priv->regs[RSTV6110_CTRL1] |= + ((((priv->mclk / 1000000) - 16) & 0x1f) << 3); + + /* divisor value for the output clock */ + priv->regs[RSTV6110_CTRL2] &= ~0xc0; + priv->regs[RSTV6110_CTRL2] |= (priv->clk_div << 6); + + stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL1], RSTV6110_CTRL1, 8); + msleep(1); + stv6110_set_bandwidth(fe, 72000000); + + return 0; +} + +static int stv6110_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct stv6110_priv *priv = fe->tuner_priv; + u32 nbsteps, divider, psd2, freq; + u8 regs[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; + + stv6110_read_regs(fe, regs, 0, 8); + /*N*/ + divider = (priv->regs[RSTV6110_TUNING2] & 0x0f) << 8; + divider += priv->regs[RSTV6110_TUNING1]; + + /*R*/ + nbsteps = (priv->regs[RSTV6110_TUNING2] >> 6) & 3; + /*p*/ + psd2 = (priv->regs[RSTV6110_TUNING2] >> 4) & 1; + + freq = divider * (priv->mclk / 1000); + freq /= (1 << (nbsteps + psd2)); + freq /= 4; + + *frequency = freq; + + return 0; +} + +static int stv6110_set_frequency(struct dvb_frontend *fe, u32 frequency) +{ + struct stv6110_priv *priv = fe->tuner_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 ret = 0x04; + u32 divider, ref, p, presc, i, result_freq, vco_freq; + s32 p_calc, p_calc_opt = 1000, r_div, r_div_opt = 0, p_val; + s32 srate; + + dprintk("%s, freq=%d kHz, mclk=%d Hz\n", __func__, + frequency, priv->mclk); + + /* K = (Reference / 1000000) - 16 */ + priv->regs[RSTV6110_CTRL1] &= ~(0x1f << 3); + priv->regs[RSTV6110_CTRL1] |= + ((((priv->mclk / 1000000) - 16) & 0x1f) << 3); + + /* BB_GAIN = db/2 */ + if (fe->ops.set_property && fe->ops.get_property) { + srate = c->symbol_rate; + dprintk("%s: Get Frontend parameters: srate=%d\n", + __func__, srate); + } else + srate = 15000000; + + priv->regs[RSTV6110_CTRL2] &= ~0x0f; + priv->regs[RSTV6110_CTRL2] |= (priv->gain & 0x0f); + + if (frequency <= 1023000) { + p = 1; + presc = 0; + } else if (frequency <= 1300000) { + p = 1; + presc = 1; + } else if (frequency <= 2046000) { + p = 0; + presc = 0; + } else { + p = 0; + presc = 1; + } + /* DIV4SEL = p*/ + priv->regs[RSTV6110_TUNING2] &= ~(1 << 4); + priv->regs[RSTV6110_TUNING2] |= (p << 4); + + /* PRESC32ON = presc */ + priv->regs[RSTV6110_TUNING2] &= ~(1 << 5); + priv->regs[RSTV6110_TUNING2] |= (presc << 5); + + p_val = (int)(1 << (p + 1)) * 10;/* P = 2 or P = 4 */ + for (r_div = 0; r_div <= 3; r_div++) { + p_calc = (priv->mclk / 100000); + p_calc /= (1 << (r_div + 1)); + if ((abssub(p_calc, p_val)) < (abssub(p_calc_opt, p_val))) + r_div_opt = r_div; + + p_calc_opt = (priv->mclk / 100000); + p_calc_opt /= (1 << (r_div_opt + 1)); + } + + ref = priv->mclk / ((1 << (r_div_opt + 1)) * (1 << (p + 1))); + divider = (((frequency * 1000) + (ref >> 1)) / ref); + + /* RDIV = r_div_opt */ + priv->regs[RSTV6110_TUNING2] &= ~(3 << 6); + priv->regs[RSTV6110_TUNING2] |= (((r_div_opt) & 3) << 6); + + /* NDIV_MSB = MSB(divider) */ + priv->regs[RSTV6110_TUNING2] &= ~0x0f; + priv->regs[RSTV6110_TUNING2] |= (((divider) >> 8) & 0x0f); + + /* NDIV_LSB, LSB(divider) */ + priv->regs[RSTV6110_TUNING1] = (divider & 0xff); + + /* CALVCOSTRT = 1 VCO Auto Calibration */ + priv->regs[RSTV6110_STAT1] |= 0x04; + stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL1], + RSTV6110_CTRL1, 8); + + i = 0; + /* Wait for CALVCOSTRT == 0 */ + while ((i < 10) && (ret != 0)) { + ret = ((stv6110_read_reg(fe, RSTV6110_STAT1)) & 0x04); + msleep(1); /* wait for VCO auto calibration */ + i++; + } + + ret = stv6110_read_reg(fe, RSTV6110_STAT1); + stv6110_get_frequency(fe, &result_freq); + + vco_freq = divider * ((priv->mclk / 1000) / ((1 << (r_div_opt + 1)))); + dprintk("%s, stat1=%x, lo_freq=%d kHz, vco_frec=%d kHz\n", __func__, + ret, result_freq, vco_freq); + + return 0; +} + +static int stv6110_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 bandwidth = carrier_width(c->symbol_rate, c->rolloff); + + stv6110_set_frequency(fe, c->frequency); + stv6110_set_bandwidth(fe, bandwidth); + + return 0; +} + +static int stv6110_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct stv6110_priv *priv = fe->tuner_priv; + u8 r8 = 0; + u8 regs[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; + stv6110_read_regs(fe, regs, 0, 8); + + /* CF */ + r8 = priv->regs[RSTV6110_CTRL3] & 0x1f; + *bandwidth = (r8 + 5) * 2000000;/* x2 for ZIF tuner BW/2 = F+5 Mhz */ + + return 0; +} + +static struct dvb_tuner_ops stv6110_tuner_ops = { + .info = { + .name = "ST STV6110", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_step = 1000, + }, + .init = stv6110_init, + .release = stv6110_release, + .sleep = stv6110_sleep, + .set_params = stv6110_set_params, + .get_frequency = stv6110_get_frequency, + .set_frequency = stv6110_set_frequency, + .get_bandwidth = stv6110_get_bandwidth, + .set_bandwidth = stv6110_set_bandwidth, + +}; + +struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe, + const struct stv6110_config *config, + struct i2c_adapter *i2c) +{ + struct stv6110_priv *priv = NULL; + u8 reg0[] = { 0x00, 0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e }; + + struct i2c_msg msg[] = { + { + .addr = config->i2c_address, + .flags = 0, + .buf = reg0, + .len = 9 + } + }; + int ret; + + /* divisor value for the output clock */ + reg0[2] &= ~0xc0; + reg0[2] |= (config->clk_div << 6); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(i2c, msg, 1); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (ret != 1) + return NULL; + + priv = kzalloc(sizeof(struct stv6110_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = config->i2c_address; + priv->i2c = i2c; + priv->mclk = config->mclk; + priv->clk_div = config->clk_div; + priv->gain = config->gain; + + memcpy(&priv->regs, ®0[1], 8); + + memcpy(&fe->ops.tuner_ops, &stv6110_tuner_ops, + sizeof(struct dvb_tuner_ops)); + fe->tuner_priv = priv; + printk(KERN_INFO "STV6110 attached on addr=%x!\n", priv->i2c_address); + + return fe; +} +EXPORT_SYMBOL(stv6110_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("ST STV6110 driver"); +MODULE_AUTHOR("Igor M. Liplianin"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/stv6110.h b/drivers/media/dvb-frontends/stv6110.h new file mode 100644 index 00000000..8fa07e6a --- /dev/null +++ b/drivers/media/dvb-frontends/stv6110.h @@ -0,0 +1,63 @@ +/* + * stv6110.h + * + * Driver for ST STV6110 satellite tuner IC. + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __DVB_STV6110_H__ +#define __DVB_STV6110_H__ + +#include +#include +#include "dvb_frontend.h" + +/* registers */ +#define RSTV6110_CTRL1 0 +#define RSTV6110_CTRL2 1 +#define RSTV6110_TUNING1 2 +#define RSTV6110_TUNING2 3 +#define RSTV6110_CTRL3 4 +#define RSTV6110_STAT1 5 +#define RSTV6110_STAT2 6 +#define RSTV6110_STAT3 7 + +struct stv6110_config { + u8 i2c_address; + u32 mclk; + u8 gain; + u8 clk_div; /* divisor value for the output clock */ +}; + +#if IS_ENABLED(CONFIG_DVB_STV6110) +extern struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe, + const struct stv6110_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe, + const struct stv6110_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/stv6110x.c b/drivers/media/dvb-frontends/stv6110x.c new file mode 100644 index 00000000..e66154e5 --- /dev/null +++ b/drivers/media/dvb-frontends/stv6110x.c @@ -0,0 +1,416 @@ +/* + STV6110(A) Silicon tuner driver + + Copyright (C) Manu Abraham + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" + +#include "stv6110x_reg.h" +#include "stv6110x.h" +#include "stv6110x_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "Set Verbosity level"); + +static int stv6110x_read_reg(struct stv6110x_state *stv6110x, u8 reg, u8 *data) +{ + int ret; + const struct stv6110x_config *config = stv6110x->config; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { .addr = config->addr, .flags = 0, .buf = b0, .len = 1 }, + { .addr = config->addr, .flags = I2C_M_RD, .buf = b1, .len = 1 } + }; + + ret = i2c_transfer(stv6110x->i2c, msg, 2); + if (ret != 2) { + dprintk(FE_ERROR, 1, "I/O Error"); + return -EREMOTEIO; + } + *data = b1[0]; + + return 0; +} + +static int stv6110x_write_regs(struct stv6110x_state *stv6110x, int start, u8 data[], int len) +{ + int ret; + const struct stv6110x_config *config = stv6110x->config; + u8 buf[MAX_XFER_SIZE]; + + struct i2c_msg msg = { + .addr = config->addr, + .flags = 0, + .buf = buf, + .len = len + 1 + }; + + if (1 + len > sizeof(buf)) { + printk(KERN_WARNING + "%s: i2c wr: len=%d is too big!\n", + KBUILD_MODNAME, len); + return -EINVAL; + } + + if (start + len > 8) + return -EINVAL; + + buf[0] = start; + memcpy(&buf[1], data, len); + + ret = i2c_transfer(stv6110x->i2c, &msg, 1); + if (ret != 1) { + dprintk(FE_ERROR, 1, "I/O Error"); + return -EREMOTEIO; + } + + return 0; +} + +static int stv6110x_write_reg(struct stv6110x_state *stv6110x, u8 reg, u8 data) +{ + return stv6110x_write_regs(stv6110x, reg, &data, 1); +} + +static int stv6110x_init(struct dvb_frontend *fe) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + int ret; + + ret = stv6110x_write_regs(stv6110x, 0, stv6110x->regs, + ARRAY_SIZE(stv6110x->regs)); + if (ret < 0) { + dprintk(FE_ERROR, 1, "Initialization failed"); + return -1; + } + + return 0; +} + +static int stv6110x_set_frequency(struct dvb_frontend *fe, u32 frequency) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + u32 rDiv, divider; + s32 pVal, pCalc, rDivOpt = 0, pCalcOpt = 1000; + u8 i; + + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_K, (REFCLOCK_MHz - 16)); + + if (frequency <= 1023000) { + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 1); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0); + pVal = 40; + } else if (frequency <= 1300000) { + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 1); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1); + pVal = 40; + } else if (frequency <= 2046000) { + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 0); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0); + pVal = 20; + } else { + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 0); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1); + pVal = 20; + } + + for (rDiv = 0; rDiv <= 3; rDiv++) { + pCalc = (REFCLOCK_kHz / 100) / R_DIV(rDiv); + + if ((abs((s32)(pCalc - pVal))) < (abs((s32)(pCalcOpt - pVal)))) + rDivOpt = rDiv; + + pCalcOpt = (REFCLOCK_kHz / 100) / R_DIV(rDivOpt); + } + + divider = (frequency * R_DIV(rDivOpt) * pVal) / REFCLOCK_kHz; + divider = (divider + 5) / 10; + + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_R_DIV, rDivOpt); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_N_DIV_11_8, MSB(divider)); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG0], TNG0_N_DIV_7_0, LSB(divider)); + + /* VCO Auto calibration */ + STV6110x_SETFIELD(stv6110x->regs[STV6110x_STAT1], STAT1_CALVCO_STRT, 1); + + stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x->regs[STV6110x_CTRL1]); + stv6110x_write_reg(stv6110x, STV6110x_TNG1, stv6110x->regs[STV6110x_TNG1]); + stv6110x_write_reg(stv6110x, STV6110x_TNG0, stv6110x->regs[STV6110x_TNG0]); + stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x->regs[STV6110x_STAT1]); + + for (i = 0; i < TRIALS; i++) { + stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]); + if (!STV6110x_GETFIELD(STAT1_CALVCO_STRT, stv6110x->regs[STV6110x_STAT1])) + break; + msleep(1); + } + + return 0; +} + +static int stv6110x_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + + stv6110x_read_reg(stv6110x, STV6110x_TNG1, &stv6110x->regs[STV6110x_TNG1]); + stv6110x_read_reg(stv6110x, STV6110x_TNG0, &stv6110x->regs[STV6110x_TNG0]); + + *frequency = (MAKEWORD16(STV6110x_GETFIELD(TNG1_N_DIV_11_8, stv6110x->regs[STV6110x_TNG1]), + STV6110x_GETFIELD(TNG0_N_DIV_7_0, stv6110x->regs[STV6110x_TNG0]))) * REFCLOCK_kHz; + + *frequency /= (1 << (STV6110x_GETFIELD(TNG1_R_DIV, stv6110x->regs[STV6110x_TNG1]) + + STV6110x_GETFIELD(TNG1_DIV4SEL, stv6110x->regs[STV6110x_TNG1]))); + + *frequency >>= 2; + + return 0; +} + +static int stv6110x_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + u32 halfbw; + u8 i; + + halfbw = bandwidth >> 1; + + if (halfbw > 36000000) + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, 31); /* LPF */ + else if (halfbw < 5000000) + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, 0); /* LPF */ + else + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, ((halfbw / 1000000) - 5)); /* LPF */ + + + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x0); /* cal. clk activated */ + STV6110x_SETFIELD(stv6110x->regs[STV6110x_STAT1], STAT1_CALRC_STRT, 0x1); /* LPF auto cal */ + + stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x->regs[STV6110x_CTRL3]); + stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x->regs[STV6110x_STAT1]); + + for (i = 0; i < TRIALS; i++) { + stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]); + if (!STV6110x_GETFIELD(STAT1_CALRC_STRT, stv6110x->regs[STV6110x_STAT1])) + break; + msleep(1); + } + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x1); /* cal. done */ + stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x->regs[STV6110x_CTRL3]); + + return 0; +} + +static int stv6110x_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + + stv6110x_read_reg(stv6110x, STV6110x_CTRL3, &stv6110x->regs[STV6110x_CTRL3]); + *bandwidth = (STV6110x_GETFIELD(CTRL3_CF, stv6110x->regs[STV6110x_CTRL3]) + 5) * 2000000; + + return 0; +} + +static int stv6110x_set_refclock(struct dvb_frontend *fe, u32 refclock) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + + /* setup divider */ + switch (refclock) { + default: + case 1: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0); + break; + case 2: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1); + break; + case 4: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2); + break; + case 8: + case 0: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3); + break; + } + stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x->regs[STV6110x_CTRL2]); + + return 0; +} + +static int stv6110x_get_bbgain(struct dvb_frontend *fe, u32 *gain) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + + stv6110x_read_reg(stv6110x, STV6110x_CTRL2, &stv6110x->regs[STV6110x_CTRL2]); + *gain = 2 * STV6110x_GETFIELD(CTRL2_BBGAIN, stv6110x->regs[STV6110x_CTRL2]); + + return 0; +} + +static int stv6110x_set_bbgain(struct dvb_frontend *fe, u32 gain) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_BBGAIN, gain / 2); + stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x->regs[STV6110x_CTRL2]); + + return 0; +} + +static int stv6110x_set_mode(struct dvb_frontend *fe, enum tuner_mode mode) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + int ret; + + switch (mode) { + case TUNER_SLEEP: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_SYN, 0); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_RX, 0); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_LPT, 0); + break; + + case TUNER_WAKE: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_SYN, 1); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_RX, 1); + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_LPT, 1); + break; + } + + ret = stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x->regs[STV6110x_CTRL1]); + if (ret < 0) { + dprintk(FE_ERROR, 1, "I/O Error"); + return -EIO; + } + + return 0; +} + +static int stv6110x_sleep(struct dvb_frontend *fe) +{ + if (fe->tuner_priv) + return stv6110x_set_mode(fe, TUNER_SLEEP); + + return 0; +} + +static int stv6110x_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + + stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]); + + if (STV6110x_GETFIELD(STAT1_LOCK, stv6110x->regs[STV6110x_STAT1])) + *status = TUNER_PHASELOCKED; + else + *status = 0; + + return 0; +} + + +static int stv6110x_release(struct dvb_frontend *fe) +{ + struct stv6110x_state *stv6110x = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(stv6110x); + + return 0; +} + +static struct dvb_tuner_ops stv6110x_ops = { + .info = { + .name = "STV6110(A) Silicon Tuner", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_step = 0, + }, + .release = stv6110x_release +}; + +static struct stv6110x_devctl stv6110x_ctl = { + .tuner_init = stv6110x_init, + .tuner_sleep = stv6110x_sleep, + .tuner_set_mode = stv6110x_set_mode, + .tuner_set_frequency = stv6110x_set_frequency, + .tuner_get_frequency = stv6110x_get_frequency, + .tuner_set_bandwidth = stv6110x_set_bandwidth, + .tuner_get_bandwidth = stv6110x_get_bandwidth, + .tuner_set_bbgain = stv6110x_set_bbgain, + .tuner_get_bbgain = stv6110x_get_bbgain, + .tuner_set_refclk = stv6110x_set_refclock, + .tuner_get_status = stv6110x_get_status, +}; + +struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe, + const struct stv6110x_config *config, + struct i2c_adapter *i2c) +{ + struct stv6110x_state *stv6110x; + u8 default_regs[] = {0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e}; + + stv6110x = kzalloc(sizeof (struct stv6110x_state), GFP_KERNEL); + if (!stv6110x) + return NULL; + + stv6110x->i2c = i2c; + stv6110x->config = config; + stv6110x->devctl = &stv6110x_ctl; + memcpy(stv6110x->regs, default_regs, 8); + + /* setup divider */ + switch (stv6110x->config->clk_div) { + default: + case 1: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0); + break; + case 2: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1); + break; + case 4: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2); + break; + case 8: + case 0: + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3); + break; + } + + fe->tuner_priv = stv6110x; + fe->ops.tuner_ops = stv6110x_ops; + + printk(KERN_INFO "%s: Attaching STV6110x\n", __func__); + return stv6110x->devctl; +} +EXPORT_SYMBOL(stv6110x_attach); + +MODULE_AUTHOR("Manu Abraham"); +MODULE_DESCRIPTION("STV6110x Silicon tuner"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/stv6110x.h b/drivers/media/dvb-frontends/stv6110x.h new file mode 100644 index 00000000..bc4766db --- /dev/null +++ b/drivers/media/dvb-frontends/stv6110x.h @@ -0,0 +1,73 @@ +/* + STV6110(A) Silicon tuner driver + + Copyright (C) Manu Abraham + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STV6110x_H +#define __STV6110x_H + +struct stv6110x_config { + u8 addr; + u32 refclk; + u8 clk_div; /* divisor value for the output clock */ +}; + +enum tuner_mode { + TUNER_SLEEP = 1, + TUNER_WAKE, +}; + +enum tuner_status { + TUNER_PHASELOCKED = 1, +}; + +struct stv6110x_devctl { + int (*tuner_init) (struct dvb_frontend *fe); + int (*tuner_sleep) (struct dvb_frontend *fe); + int (*tuner_set_mode) (struct dvb_frontend *fe, enum tuner_mode mode); + int (*tuner_set_frequency) (struct dvb_frontend *fe, u32 frequency); + int (*tuner_get_frequency) (struct dvb_frontend *fe, u32 *frequency); + int (*tuner_set_bandwidth) (struct dvb_frontend *fe, u32 bandwidth); + int (*tuner_get_bandwidth) (struct dvb_frontend *fe, u32 *bandwidth); + int (*tuner_set_bbgain) (struct dvb_frontend *fe, u32 gain); + int (*tuner_get_bbgain) (struct dvb_frontend *fe, u32 *gain); + int (*tuner_set_refclk) (struct dvb_frontend *fe, u32 refclk); + int (*tuner_get_status) (struct dvb_frontend *fe, u32 *status); +}; + + +#if IS_ENABLED(CONFIG_DVB_STV6110x) + +extern struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe, + const struct stv6110x_config *config, + struct i2c_adapter *i2c); + +#else +static inline struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe, + const struct stv6110x_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_STV6110x */ + +#endif /* __STV6110x_H */ diff --git a/drivers/media/dvb-frontends/stv6110x_priv.h b/drivers/media/dvb-frontends/stv6110x_priv.h new file mode 100644 index 00000000..0ec936a6 --- /dev/null +++ b/drivers/media/dvb-frontends/stv6110x_priv.h @@ -0,0 +1,76 @@ +/* + STV6110(A) Silicon tuner driver + + Copyright (C) Manu Abraham + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STV6110x_PRIV_H +#define __STV6110x_PRIV_H + +#define FE_ERROR 0 +#define FE_NOTICE 1 +#define FE_INFO 2 +#define FE_DEBUG 3 +#define FE_DEBUGREG 4 + +#define dprintk(__y, __z, format, arg...) do { \ + if (__z) { \ + if ((verbose > FE_ERROR) && (verbose > __y)) \ + printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_NOTICE) && (verbose > __y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_INFO) && (verbose > __y)) \ + printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ + else if ((verbose > FE_DEBUG) && (verbose > __y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ + } else { \ + if (verbose > __y) \ + printk(format, ##arg); \ + } \ +} while (0) + + +#define STV6110x_SETFIELD(mask, bitf, val) \ + (mask = (mask & (~(((1 << STV6110x_WIDTH_##bitf) - 1) << \ + STV6110x_OFFST_##bitf))) | \ + (val << STV6110x_OFFST_##bitf)) + +#define STV6110x_GETFIELD(bitf, val) \ + ((val >> STV6110x_OFFST_##bitf) & \ + ((1 << STV6110x_WIDTH_##bitf) - 1)) + +#define MAKEWORD16(a, b) (((a) << 8) | (b)) + +#define LSB(x) ((x & 0xff)) +#define MSB(y) ((y >> 8) & 0xff) + +#define TRIALS 10 +#define R_DIV(__div) (1 << (__div + 1)) +#define REFCLOCK_kHz (stv6110x->config->refclk / 1000) +#define REFCLOCK_MHz (stv6110x->config->refclk / 1000000) + +struct stv6110x_state { + struct i2c_adapter *i2c; + const struct stv6110x_config *config; + u8 regs[8]; + + struct stv6110x_devctl *devctl; +}; + +#endif /* __STV6110x_PRIV_H */ diff --git a/drivers/media/dvb-frontends/stv6110x_reg.h b/drivers/media/dvb-frontends/stv6110x_reg.h new file mode 100644 index 00000000..93e5c70e --- /dev/null +++ b/drivers/media/dvb-frontends/stv6110x_reg.h @@ -0,0 +1,82 @@ +/* + STV6110(A) Silicon tuner driver + + Copyright (C) Manu Abraham + + Copyright (C) ST Microelectronics + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __STV6110x_REG_H +#define __STV6110x_REG_H + +#define STV6110x_CTRL1 0x00 +#define STV6110x_OFFST_CTRL1_K 3 +#define STV6110x_WIDTH_CTRL1_K 5 +#define STV6110x_OFFST_CTRL1_LPT 2 +#define STV6110x_WIDTH_CTRL1_LPT 1 +#define STV6110x_OFFST_CTRL1_RX 1 +#define STV6110x_WIDTH_CTRL1_RX 1 +#define STV6110x_OFFST_CTRL1_SYN 0 +#define STV6110x_WIDTH_CTRL1_SYN 1 + +#define STV6110x_CTRL2 0x01 +#define STV6110x_OFFST_CTRL2_CO_DIV 6 +#define STV6110x_WIDTH_CTRL2_CO_DIV 2 +#define STV6110x_OFFST_CTRL2_RSVD 5 +#define STV6110x_WIDTH_CTRL2_RSVD 1 +#define STV6110x_OFFST_CTRL2_REFOUT_SEL 4 +#define STV6110x_WIDTH_CTRL2_REFOUT_SEL 1 +#define STV6110x_OFFST_CTRL2_BBGAIN 0 +#define STV6110x_WIDTH_CTRL2_BBGAIN 4 + +#define STV6110x_TNG0 0x02 +#define STV6110x_OFFST_TNG0_N_DIV_7_0 0 +#define STV6110x_WIDTH_TNG0_N_DIV_7_0 8 + +#define STV6110x_TNG1 0x03 +#define STV6110x_OFFST_TNG1_R_DIV 6 +#define STV6110x_WIDTH_TNG1_R_DIV 2 +#define STV6110x_OFFST_TNG1_PRESC32_ON 5 +#define STV6110x_WIDTH_TNG1_PRESC32_ON 1 +#define STV6110x_OFFST_TNG1_DIV4SEL 4 +#define STV6110x_WIDTH_TNG1_DIV4SEL 1 +#define STV6110x_OFFST_TNG1_N_DIV_11_8 0 +#define STV6110x_WIDTH_TNG1_N_DIV_11_8 4 + + +#define STV6110x_CTRL3 0x04 +#define STV6110x_OFFST_CTRL3_DCLOOP_OFF 7 +#define STV6110x_WIDTH_CTRL3_DCLOOP_OFF 1 +#define STV6110x_OFFST_CTRL3_RCCLK_OFF 6 +#define STV6110x_WIDTH_CTRL3_RCCLK_OFF 1 +#define STV6110x_OFFST_CTRL3_ICP 5 +#define STV6110x_WIDTH_CTRL3_ICP 1 +#define STV6110x_OFFST_CTRL3_CF 0 +#define STV6110x_WIDTH_CTRL3_CF 5 + +#define STV6110x_STAT1 0x05 +#define STV6110x_OFFST_STAT1_CALVCO_STRT 2 +#define STV6110x_WIDTH_STAT1_CALVCO_STRT 1 +#define STV6110x_OFFST_STAT1_CALRC_STRT 1 +#define STV6110x_WIDTH_STAT1_CALRC_STRT 1 +#define STV6110x_OFFST_STAT1_LOCK 0 +#define STV6110x_WIDTH_STAT1_LOCK 1 + +#define STV6110x_STAT2 0x06 +#define STV6110x_STAT3 0x07 + +#endif /* __STV6110x_REG_H */ diff --git a/drivers/media/dvb-frontends/tda10021.c b/drivers/media/dvb-frontends/tda10021.c new file mode 100644 index 00000000..1bff7f45 --- /dev/null +++ b/drivers/media/dvb-frontends/tda10021.c @@ -0,0 +1,528 @@ +/* + TDA10021 - Single Chip Cable Channel Receiver driver module + used on the Siemens DVB-C cards + + Copyright (C) 1999 Convergence Integrated Media GmbH + Copyright (C) 2004 Markus Schulz + Support for TDA10021 + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "tda1002x.h" + + +struct tda10021_state { + struct i2c_adapter* i2c; + /* configuration settings */ + const struct tda1002x_config* config; + struct dvb_frontend frontend; + + u8 pwm; + u8 reg0; +}; + + +#if 0 +#define dprintk(x...) printk(x) +#else +#define dprintk(x...) +#endif + +static int verbose; + +#define XIN 57840000UL + +#define FIN (XIN >> 4) + +static int tda10021_inittab_size = 0x40; +static u8 tda10021_inittab[0x40]= +{ + 0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a, + 0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40, + 0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff, + 0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00, + 0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00, + 0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58, + 0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00, + 0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00, +}; + +static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + int ret; + + ret = i2c_transfer (state->i2c, &msg, 1); + if (ret != 1) + printk("DVB: TDA10021(%d): %s, writereg error " + "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", + state->frontend.dvb->num, __func__, reg, data, ret); + + msleep(10); + return (ret != 1) ? -EREMOTEIO : 0; +} + +static u8 tda10021_readreg (struct tda10021_state* state, u8 reg) +{ + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + int ret; + + ret = i2c_transfer (state->i2c, msg, 2); + // Don't print an error message if the id is read. + if (ret != 2 && reg != 0x1a) + printk("DVB: TDA10021: %s: readreg error (ret == %i)\n", + __func__, ret); + return b1[0]; +} + +//get access to tuner +static int lock_tuner(struct tda10021_state* state) +{ + u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] | 0x80 }; + struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2}; + + if(i2c_transfer(state->i2c, &msg, 1) != 1) + { + printk("tda10021: lock tuner fails\n"); + return -EREMOTEIO; + } + return 0; +} + +//release access from tuner +static int unlock_tuner(struct tda10021_state* state) +{ + u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] & 0x7f }; + struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2}; + + if(i2c_transfer(state->i2c, &msg_post, 1) != 1) + { + printk("tda10021: unlock tuner fails\n"); + return -EREMOTEIO; + } + return 0; +} + +static int tda10021_setup_reg0 (struct tda10021_state* state, u8 reg0, + fe_spectral_inversion_t inversion) +{ + reg0 |= state->reg0 & 0x63; + + if ((INVERSION_ON == inversion) ^ (state->config->invert == 0)) + reg0 &= ~0x20; + else + reg0 |= 0x20; + + _tda10021_writereg (state, 0x00, reg0 & 0xfe); + _tda10021_writereg (state, 0x00, reg0 | 0x01); + + state->reg0 = reg0; + return 0; +} + +static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate) +{ + s32 BDR; + s32 BDRI; + s16 SFIL=0; + u16 NDEC = 0; + u32 tmp, ratio; + + if (symbolrate > XIN/2) + symbolrate = XIN/2; + if (symbolrate < 500000) + symbolrate = 500000; + + if (symbolrate < XIN/16) NDEC = 1; + if (symbolrate < XIN/32) NDEC = 2; + if (symbolrate < XIN/64) NDEC = 3; + + if (symbolrate < (u32)(XIN/12.3)) SFIL = 1; + if (symbolrate < (u32)(XIN/16)) SFIL = 0; + if (symbolrate < (u32)(XIN/24.6)) SFIL = 1; + if (symbolrate < (u32)(XIN/32)) SFIL = 0; + if (symbolrate < (u32)(XIN/49.2)) SFIL = 1; + if (symbolrate < (u32)(XIN/64)) SFIL = 0; + if (symbolrate < (u32)(XIN/98.4)) SFIL = 1; + + symbolrate <<= NDEC; + ratio = (symbolrate << 4) / FIN; + tmp = ((symbolrate << 4) % FIN) << 8; + ratio = (ratio << 8) + tmp / FIN; + tmp = (tmp % FIN) << 8; + ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, FIN); + + BDR = ratio; + BDRI = (((XIN << 5) / symbolrate) + 1) / 2; + + if (BDRI > 0xFF) + BDRI = 0xFF; + + SFIL = (SFIL << 4) | tda10021_inittab[0x0E]; + + NDEC = (NDEC << 6) | tda10021_inittab[0x03]; + + _tda10021_writereg (state, 0x03, NDEC); + _tda10021_writereg (state, 0x0a, BDR&0xff); + _tda10021_writereg (state, 0x0b, (BDR>> 8)&0xff); + _tda10021_writereg (state, 0x0c, (BDR>>16)&0x3f); + + _tda10021_writereg (state, 0x0d, BDRI); + _tda10021_writereg (state, 0x0e, SFIL); + + return 0; +} + +static int tda10021_init (struct dvb_frontend *fe) +{ + struct tda10021_state* state = fe->demodulator_priv; + int i; + + dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num); + + //_tda10021_writereg (fe, 0, 0); + + for (i=0; ipwm); + + //Comment by markus + //0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0) + //0x2A[4] == BYPPLL -> Power down mode (default 1) + //0x2A[5] == LCK -> PLL Lock Flag + //0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0) + + //Activate PLL + _tda10021_writereg(state, 0x2a, tda10021_inittab[0x2a] & 0xef); + return 0; +} + +struct qam_params { + u8 conf, agcref, lthr, mseth, aref; +}; + +static int tda10021_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 delsys = c->delivery_system; + unsigned qam = c->modulation; + bool is_annex_c; + u32 reg0x3d; + struct tda10021_state* state = fe->demodulator_priv; + static const struct qam_params qam_params[] = { + /* Modulation Conf AGCref LTHR MSETH AREF */ + [QPSK] = { 0x14, 0x78, 0x78, 0x8c, 0x96 }, + [QAM_16] = { 0x00, 0x8c, 0x87, 0xa2, 0x91 }, + [QAM_32] = { 0x04, 0x8c, 0x64, 0x74, 0x96 }, + [QAM_64] = { 0x08, 0x6a, 0x46, 0x43, 0x6a }, + [QAM_128] = { 0x0c, 0x78, 0x36, 0x34, 0x7e }, + [QAM_256] = { 0x10, 0x5c, 0x26, 0x23, 0x6b }, + }; + + switch (delsys) { + case SYS_DVBC_ANNEX_A: + is_annex_c = false; + break; + case SYS_DVBC_ANNEX_C: + is_annex_c = true; + break; + default: + return -EINVAL; + } + + /* + * gcc optimizes the code bellow the same way as it would code: + * "if (qam > 5) return -EINVAL;" + * Yet, the code is clearer, as it shows what QAM standards are + * supported by the driver, and avoids the usage of magic numbers on + * it. + */ + switch (qam) { + case QPSK: + case QAM_16: + case QAM_32: + case QAM_64: + case QAM_128: + case QAM_256: + break; + default: + return -EINVAL; + } + + if (c->inversion != INVERSION_ON && c->inversion != INVERSION_OFF) + return -EINVAL; + + /*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/ + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + tda10021_set_symbolrate(state, c->symbol_rate); + _tda10021_writereg(state, 0x34, state->pwm); + + _tda10021_writereg(state, 0x01, qam_params[qam].agcref); + _tda10021_writereg(state, 0x05, qam_params[qam].lthr); + _tda10021_writereg(state, 0x08, qam_params[qam].mseth); + _tda10021_writereg(state, 0x09, qam_params[qam].aref); + + /* + * Bit 0 == 0 means roll-off = 0.15 (Annex A) + * == 1 means roll-off = 0.13 (Annex C) + */ + reg0x3d = tda10021_readreg (state, 0x3d); + if (is_annex_c) + _tda10021_writereg (state, 0x3d, 0x01 | reg0x3d); + else + _tda10021_writereg (state, 0x3d, 0xfe & reg0x3d); + tda10021_setup_reg0(state, qam_params[qam].conf, c->inversion); + + return 0; +} + +static int tda10021_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct tda10021_state* state = fe->demodulator_priv; + int sync; + + *status = 0; + //0x11[0] == EQALGO -> Equalizer algorithms state + //0x11[1] == CARLOCK -> Carrier locked + //0x11[2] == FSYNC -> Frame synchronisation + //0x11[3] == FEL -> Front End locked + //0x11[6] == NODVB -> DVB Mode Information + sync = tda10021_readreg (state, 0x11); + + if (sync & 2) + *status |= FE_HAS_SIGNAL|FE_HAS_CARRIER; + + if (sync & 4) + *status |= FE_HAS_SYNC|FE_HAS_VITERBI; + + if (sync & 8) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct tda10021_state* state = fe->demodulator_priv; + + u32 _ber = tda10021_readreg(state, 0x14) | + (tda10021_readreg(state, 0x15) << 8) | + ((tda10021_readreg(state, 0x16) & 0x0f) << 16); + _tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0) + | (tda10021_inittab[0x10] & 0xc0)); + *ber = 10 * _ber; + + return 0; +} + +static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct tda10021_state* state = fe->demodulator_priv; + + u8 config = tda10021_readreg(state, 0x02); + u8 gain = tda10021_readreg(state, 0x17); + if (config & 0x02) + /* the agc value is inverted */ + gain = ~gain; + *strength = (gain << 8) | gain; + + return 0; +} + +static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct tda10021_state* state = fe->demodulator_priv; + + u8 quality = ~tda10021_readreg(state, 0x18); + *snr = (quality << 8) | quality; + + return 0; +} + +static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct tda10021_state* state = fe->demodulator_priv; + + *ucblocks = tda10021_readreg (state, 0x13) & 0x7f; + if (*ucblocks == 0x7f) + *ucblocks = 0xffffffff; + + /* reset uncorrected block counter */ + _tda10021_writereg (state, 0x10, tda10021_inittab[0x10] & 0xdf); + _tda10021_writereg (state, 0x10, tda10021_inittab[0x10]); + + return 0; +} + +static int tda10021_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct tda10021_state* state = fe->demodulator_priv; + int sync; + s8 afc = 0; + + sync = tda10021_readreg(state, 0x11); + afc = tda10021_readreg(state, 0x19); + if (verbose) { + /* AFC only valid when carrier has been recovered */ + printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" : + "DVB: TDA10021(%d): [AFC (%d) %dHz]\n", + state->frontend.dvb->num, afc, + -((s32)p->symbol_rate * afc) >> 10); + } + + p->inversion = ((state->reg0 & 0x20) == 0x20) ^ (state->config->invert != 0) ? INVERSION_ON : INVERSION_OFF; + p->modulation = ((state->reg0 >> 2) & 7) + QAM_16; + + p->fec_inner = FEC_NONE; + p->frequency = ((p->frequency + 31250) / 62500) * 62500; + + if (sync & 2) + p->frequency -= ((s32)p->symbol_rate * afc) >> 10; + + return 0; +} + +static int tda10021_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct tda10021_state* state = fe->demodulator_priv; + + if (enable) { + lock_tuner(state); + } else { + unlock_tuner(state); + } + return 0; +} + +static int tda10021_sleep(struct dvb_frontend* fe) +{ + struct tda10021_state* state = fe->demodulator_priv; + + _tda10021_writereg (state, 0x1b, 0x02); /* pdown ADC */ + _tda10021_writereg (state, 0x00, 0x80); /* standby */ + + return 0; +} + +static void tda10021_release(struct dvb_frontend* fe) +{ + struct tda10021_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops tda10021_ops; + +struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, + struct i2c_adapter* i2c, + u8 pwm) +{ + struct tda10021_state* state = NULL; + u8 id; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->pwm = pwm; + state->reg0 = tda10021_inittab[0]; + + /* check if the demod is there */ + id = tda10021_readreg(state, 0x1a); + if ((id & 0xf0) != 0x70) goto error; + + /* Don't claim TDA10023 */ + if (id == 0x7d) + goto error; + + printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n", + state->config->demod_address, id); + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda10021_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops tda10021_ops = { + .delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C }, + .info = { + .name = "Philips TDA10021 DVB-C", + .frequency_stepsize = 62500, + .frequency_min = 47000000, + .frequency_max = 862000000, + .symbol_rate_min = (XIN/2)/64, /* SACLK/64 == (XIN/2)/64 */ + .symbol_rate_max = (XIN/2)/4, /* SACLK/4 */ + #if 0 + .frequency_tolerance = ???, + .symbol_rate_tolerance = ???, /* ppm */ /* == 8% (spec p. 5) */ + #endif + .caps = 0x400 | //FE_CAN_QAM_4 + FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | + FE_CAN_FEC_AUTO + }, + + .release = tda10021_release, + + .init = tda10021_init, + .sleep = tda10021_sleep, + .i2c_gate_ctrl = tda10021_i2c_gate_ctrl, + + .set_frontend = tda10021_set_parameters, + .get_frontend = tda10021_get_frontend, + + .read_status = tda10021_read_status, + .read_ber = tda10021_read_ber, + .read_signal_strength = tda10021_read_signal_strength, + .read_snr = tda10021_read_snr, + .read_ucblocks = tda10021_read_ucblocks, +}; + +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting"); + +MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver"); +MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(tda10021_attach); diff --git a/drivers/media/dvb-frontends/tda10023.c b/drivers/media/dvb-frontends/tda10023.c new file mode 100644 index 00000000..ca1e0d54 --- /dev/null +++ b/drivers/media/dvb-frontends/tda10023.c @@ -0,0 +1,610 @@ +/* + TDA10023 - DVB-C decoder + (as used in Philips CU1216-3 NIM and the Reelbox DVB-C tuner card) + + Copyright (C) 2005 Georg Acher, BayCom GmbH (acher at baycom dot de) + Copyright (c) 2006 Hartmut Birr (e9hack at gmail dot com) + + Remotely based on tda10021.c + Copyright (C) 1999 Convergence Integrated Media GmbH + Copyright (C) 2004 Markus Schulz + Support for TDA10021 + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "dvb_frontend.h" +#include "tda1002x.h" + +#define REG0_INIT_VAL 0x23 + +struct tda10023_state { + struct i2c_adapter* i2c; + /* configuration settings */ + const struct tda10023_config *config; + struct dvb_frontend frontend; + + u8 pwm; + u8 reg0; + + /* clock settings */ + u32 xtal; + u8 pll_m; + u8 pll_p; + u8 pll_n; + u32 sysclk; +}; + +#define dprintk(x...) + +static int verbose; + +static u8 tda10023_readreg (struct tda10023_state* state, u8 reg) +{ + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + int ret; + + ret = i2c_transfer (state->i2c, msg, 2); + if (ret != 2) { + int num = state->frontend.dvb ? state->frontend.dvb->num : -1; + printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error " + "(reg == 0x%02x, ret == %i)\n", + num, __func__, reg, ret); + } + return b1[0]; +} + +static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + int ret; + + ret = i2c_transfer (state->i2c, &msg, 1); + if (ret != 1) { + int num = state->frontend.dvb ? state->frontend.dvb->num : -1; + printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error " + "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", + num, __func__, reg, data, ret); + } + return (ret != 1) ? -EREMOTEIO : 0; +} + + +static int tda10023_writebit (struct tda10023_state* state, u8 reg, u8 mask,u8 data) +{ + if (mask==0xff) + return tda10023_writereg(state, reg, data); + else { + u8 val; + val=tda10023_readreg(state,reg); + val&=~mask; + val|=(data&mask); + return tda10023_writereg(state, reg, val); + } +} + +static void tda10023_writetab(struct tda10023_state* state, u8* tab) +{ + u8 r,m,v; + while (1) { + r=*tab++; + m=*tab++; + v=*tab++; + if (r==0xff) { + if (m==0xff) + break; + else + msleep(m); + } + else + tda10023_writebit(state,r,m,v); + } +} + +//get access to tuner +static int lock_tuner(struct tda10023_state* state) +{ + u8 buf[2] = { 0x0f, 0xc0 }; + struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2}; + + if(i2c_transfer(state->i2c, &msg, 1) != 1) + { + printk("tda10023: lock tuner fails\n"); + return -EREMOTEIO; + } + return 0; +} + +//release access from tuner +static int unlock_tuner(struct tda10023_state* state) +{ + u8 buf[2] = { 0x0f, 0x40 }; + struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2}; + + if(i2c_transfer(state->i2c, &msg_post, 1) != 1) + { + printk("tda10023: unlock tuner fails\n"); + return -EREMOTEIO; + } + return 0; +} + +static int tda10023_setup_reg0 (struct tda10023_state* state, u8 reg0) +{ + reg0 |= state->reg0 & 0x63; + + tda10023_writereg (state, 0x00, reg0 & 0xfe); + tda10023_writereg (state, 0x00, reg0 | 0x01); + + state->reg0 = reg0; + return 0; +} + +static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr) +{ + s32 BDR; + s32 BDRI; + s16 SFIL=0; + u16 NDEC = 0; + + /* avoid floating point operations multiplying syscloc and divider + by 10 */ + u32 sysclk_x_10 = state->sysclk * 10; + + if (sr < (u32)(sysclk_x_10/984)) { + NDEC=3; + SFIL=1; + } else if (sr < (u32)(sysclk_x_10/640)) { + NDEC=3; + SFIL=0; + } else if (sr < (u32)(sysclk_x_10/492)) { + NDEC=2; + SFIL=1; + } else if (sr < (u32)(sysclk_x_10/320)) { + NDEC=2; + SFIL=0; + } else if (sr < (u32)(sysclk_x_10/246)) { + NDEC=1; + SFIL=1; + } else if (sr < (u32)(sysclk_x_10/160)) { + NDEC=1; + SFIL=0; + } else if (sr < (u32)(sysclk_x_10/123)) { + NDEC=0; + SFIL=1; + } + + BDRI = (state->sysclk)*16; + BDRI>>=NDEC; + BDRI +=sr/2; + BDRI /=sr; + + if (BDRI>255) + BDRI=255; + + { + u64 BDRX; + + BDRX=1<<(24+NDEC); + BDRX*=sr; + do_div(BDRX, state->sysclk); /* BDRX/=SYSCLK; */ + + BDR=(s32)BDRX; + } + dprintk("Symbolrate %i, BDR %i BDRI %i, NDEC %i\n", + sr, BDR, BDRI, NDEC); + tda10023_writebit (state, 0x03, 0xc0, NDEC<<6); + tda10023_writereg (state, 0x0a, BDR&255); + tda10023_writereg (state, 0x0b, (BDR>>8)&255); + tda10023_writereg (state, 0x0c, (BDR>>16)&31); + tda10023_writereg (state, 0x0d, BDRI); + tda10023_writereg (state, 0x3d, (SFIL<<7)); + return 0; +} + +static int tda10023_init (struct dvb_frontend *fe) +{ + struct tda10023_state* state = fe->demodulator_priv; + u8 tda10023_inittab[] = { +/* reg mask val */ +/* 000 */ 0x2a, 0xff, 0x02, /* PLL3, Bypass, Power Down */ +/* 003 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 006 */ 0x2a, 0xff, 0x03, /* PLL3, Bypass, Power Down */ +/* 009 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ + /* PLL1 */ +/* 012 */ 0x28, 0xff, (state->pll_m-1), + /* PLL2 */ +/* 015 */ 0x29, 0xff, ((state->pll_p-1)<<6)|(state->pll_n-1), + /* GPR FSAMPLING=1 */ +/* 018 */ 0x00, 0xff, REG0_INIT_VAL, +/* 021 */ 0x2a, 0xff, 0x08, /* PLL3 PSACLK=1 */ +/* 024 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 027 */ 0x1f, 0xff, 0x00, /* RESET */ +/* 030 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 033 */ 0xe6, 0x0c, 0x04, /* RSCFG_IND */ +/* 036 */ 0x10, 0xc0, 0x80, /* DECDVBCFG1 PBER=1 */ + +/* 039 */ 0x0e, 0xff, 0x82, /* GAIN1 */ +/* 042 */ 0x03, 0x08, 0x08, /* CLKCONF DYN=1 */ +/* 045 */ 0x2e, 0xbf, 0x30, /* AGCCONF2 TRIAGC=0,POSAGC=ENAGCIF=1 + PPWMTUN=0 PPWMIF=0 */ +/* 048 */ 0x01, 0xff, 0x30, /* AGCREF */ +/* 051 */ 0x1e, 0x84, 0x84, /* CONTROL SACLK_ON=1 */ +/* 054 */ 0x1b, 0xff, 0xc8, /* ADC TWOS=1 */ +/* 057 */ 0x3b, 0xff, 0xff, /* IFMAX */ +/* 060 */ 0x3c, 0xff, 0x00, /* IFMIN */ +/* 063 */ 0x34, 0xff, 0x00, /* PWMREF */ +/* 066 */ 0x35, 0xff, 0xff, /* TUNMAX */ +/* 069 */ 0x36, 0xff, 0x00, /* TUNMIN */ +/* 072 */ 0x06, 0xff, 0x7f, /* EQCONF1 POSI=7 ENADAPT=ENEQUAL=DFE=1 */ +/* 075 */ 0x1c, 0x30, 0x30, /* EQCONF2 STEPALGO=SGNALGO=1 */ +/* 078 */ 0x37, 0xff, 0xf6, /* DELTAF_LSB */ +/* 081 */ 0x38, 0xff, 0xff, /* DELTAF_MSB */ +/* 084 */ 0x02, 0xff, 0x93, /* AGCCONF1 IFS=1 KAGCIF=2 KAGCTUN=3 */ +/* 087 */ 0x2d, 0xff, 0xf6, /* SWEEP SWPOS=1 SWDYN=7 SWSTEP=1 SWLEN=2 */ +/* 090 */ 0x04, 0x10, 0x00, /* SWRAMP=1 */ +/* 093 */ 0x12, 0xff, TDA10023_OUTPUT_MODE_PARALLEL_B, /* + INTP1 POCLKP=1 FEL=1 MFS=0 */ +/* 096 */ 0x2b, 0x01, 0xa1, /* INTS1 */ +/* 099 */ 0x20, 0xff, 0x04, /* INTP2 SWAPP=? MSBFIRSTP=? INTPSEL=? */ +/* 102 */ 0x2c, 0xff, 0x0d, /* INTP/S TRIP=0 TRIS=0 */ +/* 105 */ 0xc4, 0xff, 0x00, +/* 108 */ 0xc3, 0x30, 0x00, +/* 111 */ 0xb5, 0xff, 0x19, /* ERAGC_THD */ +/* 114 */ 0x00, 0x03, 0x01, /* GPR, CLBS soft reset */ +/* 117 */ 0x00, 0x03, 0x03, /* GPR, CLBS soft reset */ +/* 120 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 123 */ 0xff, 0xff, 0xff +}; + dprintk("DVB: TDA10023(%d): init chip\n", fe->dvb->num); + + /* override default values if set in config */ + if (state->config->deltaf) { + tda10023_inittab[80] = (state->config->deltaf & 0xff); + tda10023_inittab[83] = (state->config->deltaf >> 8); + } + + if (state->config->output_mode) + tda10023_inittab[95] = state->config->output_mode; + + tda10023_writetab(state, tda10023_inittab); + + return 0; +} + +struct qam_params { + u8 qam, lockthr, mseth, aref, agcrefnyq, eragnyq_thd; +}; + +static int tda10023_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 delsys = c->delivery_system; + unsigned qam = c->modulation; + bool is_annex_c; + struct tda10023_state* state = fe->demodulator_priv; + static const struct qam_params qam_params[] = { + /* Modulation QAM LOCKTHR MSETH AREF AGCREFNYQ ERAGCNYQ_THD */ + [QPSK] = { (5<<2), 0x78, 0x8c, 0x96, 0x78, 0x4c }, + [QAM_16] = { (0<<2), 0x87, 0xa2, 0x91, 0x8c, 0x57 }, + [QAM_32] = { (1<<2), 0x64, 0x74, 0x96, 0x8c, 0x57 }, + [QAM_64] = { (2<<2), 0x46, 0x43, 0x6a, 0x6a, 0x44 }, + [QAM_128] = { (3<<2), 0x36, 0x34, 0x7e, 0x78, 0x4c }, + [QAM_256] = { (4<<2), 0x26, 0x23, 0x6c, 0x5c, 0x3c }, + }; + + switch (delsys) { + case SYS_DVBC_ANNEX_A: + is_annex_c = false; + break; + case SYS_DVBC_ANNEX_C: + is_annex_c = true; + break; + default: + return -EINVAL; + } + + /* + * gcc optimizes the code bellow the same way as it would code: + * "if (qam > 5) return -EINVAL;" + * Yet, the code is clearer, as it shows what QAM standards are + * supported by the driver, and avoids the usage of magic numbers on + * it. + */ + switch (qam) { + case QPSK: + case QAM_16: + case QAM_32: + case QAM_64: + case QAM_128: + case QAM_256: + break; + default: + return -EINVAL; + } + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + tda10023_set_symbolrate(state, c->symbol_rate); + tda10023_writereg(state, 0x05, qam_params[qam].lockthr); + tda10023_writereg(state, 0x08, qam_params[qam].mseth); + tda10023_writereg(state, 0x09, qam_params[qam].aref); + tda10023_writereg(state, 0xb4, qam_params[qam].agcrefnyq); + tda10023_writereg(state, 0xb6, qam_params[qam].eragnyq_thd); +#if 0 + tda10023_writereg(state, 0x04, (c->inversion ? 0x12 : 0x32)); + tda10023_writebit(state, 0x04, 0x60, (c->inversion ? 0 : 0x20)); +#endif + tda10023_writebit(state, 0x04, 0x40, 0x40); + + if (is_annex_c) + tda10023_writebit(state, 0x3d, 0xfc, 0x03); + else + tda10023_writebit(state, 0x3d, 0xfc, 0x02); + + tda10023_setup_reg0(state, qam_params[qam].qam); + + return 0; +} + +static int tda10023_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct tda10023_state* state = fe->demodulator_priv; + int sync; + + *status = 0; + + //0x11[1] == CARLOCK -> Carrier locked + //0x11[2] == FSYNC -> Frame synchronisation + //0x11[3] == FEL -> Front End locked + //0x11[6] == NODVB -> DVB Mode Information + sync = tda10023_readreg (state, 0x11); + + if (sync & 2) + *status |= FE_HAS_SIGNAL|FE_HAS_CARRIER; + + if (sync & 4) + *status |= FE_HAS_SYNC|FE_HAS_VITERBI; + + if (sync & 8) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int tda10023_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct tda10023_state* state = fe->demodulator_priv; + u8 a,b,c; + a=tda10023_readreg(state, 0x14); + b=tda10023_readreg(state, 0x15); + c=tda10023_readreg(state, 0x16)&0xf; + tda10023_writebit (state, 0x10, 0xc0, 0x00); + + *ber = a | (b<<8)| (c<<16); + return 0; +} + +static int tda10023_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct tda10023_state* state = fe->demodulator_priv; + u8 ifgain=tda10023_readreg(state, 0x2f); + + u16 gain = ((255-tda10023_readreg(state, 0x17))) + (255-ifgain)/16; + // Max raw value is about 0xb0 -> Normalize to >0xf0 after 0x90 + if (gain>0x90) + gain=gain+2*(gain-0x90); + if (gain>255) + gain=255; + + *strength = (gain<<8)|gain; + return 0; +} + +static int tda10023_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct tda10023_state* state = fe->demodulator_priv; + + u8 quality = ~tda10023_readreg(state, 0x18); + *snr = (quality << 8) | quality; + return 0; +} + +static int tda10023_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct tda10023_state* state = fe->demodulator_priv; + u8 a,b,c,d; + a= tda10023_readreg (state, 0x74); + b= tda10023_readreg (state, 0x75); + c= tda10023_readreg (state, 0x76); + d= tda10023_readreg (state, 0x77); + *ucblocks = a | (b<<8)|(c<<16)|(d<<24); + + tda10023_writebit (state, 0x10, 0x20,0x00); + tda10023_writebit (state, 0x10, 0x20,0x20); + tda10023_writebit (state, 0x13, 0x01, 0x00); + + return 0; +} + +static int tda10023_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct tda10023_state* state = fe->demodulator_priv; + int sync,inv; + s8 afc = 0; + + sync = tda10023_readreg(state, 0x11); + afc = tda10023_readreg(state, 0x19); + inv = tda10023_readreg(state, 0x04); + + if (verbose) { + /* AFC only valid when carrier has been recovered */ + printk(sync & 2 ? "DVB: TDA10023(%d): AFC (%d) %dHz\n" : + "DVB: TDA10023(%d): [AFC (%d) %dHz]\n", + state->frontend.dvb->num, afc, + -((s32)p->symbol_rate * afc) >> 10); + } + + p->inversion = (inv&0x20?0:1); + p->modulation = ((state->reg0 >> 2) & 7) + QAM_16; + + p->fec_inner = FEC_NONE; + p->frequency = ((p->frequency + 31250) / 62500) * 62500; + + if (sync & 2) + p->frequency -= ((s32)p->symbol_rate * afc) >> 10; + + return 0; +} + +static int tda10023_sleep(struct dvb_frontend* fe) +{ + struct tda10023_state* state = fe->demodulator_priv; + + tda10023_writereg (state, 0x1b, 0x02); /* pdown ADC */ + tda10023_writereg (state, 0x00, 0x80); /* standby */ + + return 0; +} + +static int tda10023_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct tda10023_state* state = fe->demodulator_priv; + + if (enable) { + lock_tuner(state); + } else { + unlock_tuner(state); + } + return 0; +} + +static void tda10023_release(struct dvb_frontend* fe) +{ + struct tda10023_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops tda10023_ops; + +struct dvb_frontend *tda10023_attach(const struct tda10023_config *config, + struct i2c_adapter *i2c, + u8 pwm) +{ + struct tda10023_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* wakeup if in standby */ + tda10023_writereg (state, 0x00, 0x33); + /* check if the demod is there */ + if ((tda10023_readreg(state, 0x1a) & 0xf0) != 0x70) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops)); + state->pwm = pwm; + state->reg0 = REG0_INIT_VAL; + if (state->config->xtal) { + state->xtal = state->config->xtal; + state->pll_m = state->config->pll_m; + state->pll_p = state->config->pll_p; + state->pll_n = state->config->pll_n; + } else { + /* set default values if not defined in config */ + state->xtal = 28920000; + state->pll_m = 8; + state->pll_p = 4; + state->pll_n = 1; + } + + /* calc sysclk */ + state->sysclk = (state->xtal * state->pll_m / \ + (state->pll_n * state->pll_p)); + + state->frontend.ops.info.symbol_rate_min = (state->sysclk/2)/64; + state->frontend.ops.info.symbol_rate_max = (state->sysclk/2)/4; + + dprintk("DVB: TDA10023 %s: xtal:%d pll_m:%d pll_p:%d pll_n:%d\n", + __func__, state->xtal, state->pll_m, state->pll_p, + state->pll_n); + + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops tda10023_ops = { + .delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C }, + .info = { + .name = "Philips TDA10023 DVB-C", + .frequency_stepsize = 62500, + .frequency_min = 47000000, + .frequency_max = 862000000, + .symbol_rate_min = 0, /* set in tda10023_attach */ + .symbol_rate_max = 0, /* set in tda10023_attach */ + .caps = 0x400 | //FE_CAN_QAM_4 + FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | + FE_CAN_FEC_AUTO + }, + + .release = tda10023_release, + + .init = tda10023_init, + .sleep = tda10023_sleep, + .i2c_gate_ctrl = tda10023_i2c_gate_ctrl, + + .set_frontend = tda10023_set_parameters, + .get_frontend = tda10023_get_frontend, + .read_status = tda10023_read_status, + .read_ber = tda10023_read_ber, + .read_signal_strength = tda10023_read_signal_strength, + .read_snr = tda10023_read_snr, + .read_ucblocks = tda10023_read_ucblocks, +}; + + +MODULE_DESCRIPTION("Philips TDA10023 DVB-C demodulator driver"); +MODULE_AUTHOR("Georg Acher, Hartmut Birr"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(tda10023_attach); diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h new file mode 100644 index 00000000..e404b6e4 --- /dev/null +++ b/drivers/media/dvb-frontends/tda1002x.h @@ -0,0 +1,86 @@ +/* + TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module + used on the the Siemens DVB-C cards + + Copyright (C) 1999 Convergence Integrated Media GmbH + Copyright (C) 2004 Markus Schulz + Support for TDA10021 + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef TDA1002x_H +#define TDA1002x_H + +#include + +struct tda1002x_config { + /* the demodulator's i2c address */ + u8 demod_address; + u8 invert; +}; + +enum tda10023_output_mode { + TDA10023_OUTPUT_MODE_PARALLEL_A = 0xe0, + TDA10023_OUTPUT_MODE_PARALLEL_B = 0xa1, + TDA10023_OUTPUT_MODE_PARALLEL_C = 0xa0, + TDA10023_OUTPUT_MODE_SERIAL, /* TODO: not implemented */ +}; + +struct tda10023_config { + /* the demodulator's i2c address */ + u8 demod_address; + u8 invert; + + /* clock settings */ + u32 xtal; /* defaults: 28920000 */ + u8 pll_m; /* defaults: 8 */ + u8 pll_p; /* defaults: 4 */ + u8 pll_n; /* defaults: 1 */ + + /* MPEG2 TS output mode */ + u8 output_mode; + + /* input freq offset + baseband conversion type */ + u16 deltaf; +}; + +#if IS_ENABLED(CONFIG_DVB_TDA10021) +extern struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, + struct i2c_adapter* i2c, u8 pwm); +#else +static inline struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, + struct i2c_adapter* i2c, u8 pwm) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_TDA10021 + +#if IS_ENABLED(CONFIG_DVB_TDA10023) +extern struct dvb_frontend *tda10023_attach( + const struct tda10023_config *config, + struct i2c_adapter *i2c, u8 pwm); +#else +static inline struct dvb_frontend *tda10023_attach( + const struct tda10023_config *config, + struct i2c_adapter *i2c, u8 pwm) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_TDA10023 + +#endif // TDA1002x_H diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c new file mode 100644 index 00000000..71fb6329 --- /dev/null +++ b/drivers/media/dvb-frontends/tda10048.c @@ -0,0 +1,1191 @@ +/* + NXP TDA10048HN DVB OFDM demodulator driver + + Copyright (C) 2009 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "tda10048.h" + +#define TDA10048_DEFAULT_FIRMWARE "dvb-fe-tda10048-1.0.fw" +#define TDA10048_DEFAULT_FIRMWARE_SIZE 24878 + +/* Register name definitions */ +#define TDA10048_IDENTITY 0x00 +#define TDA10048_VERSION 0x01 +#define TDA10048_DSP_CODE_CPT 0x0C +#define TDA10048_DSP_CODE_IN 0x0E +#define TDA10048_IN_CONF1 0x10 +#define TDA10048_IN_CONF2 0x11 +#define TDA10048_IN_CONF3 0x12 +#define TDA10048_OUT_CONF1 0x14 +#define TDA10048_OUT_CONF2 0x15 +#define TDA10048_OUT_CONF3 0x16 +#define TDA10048_AUTO 0x18 +#define TDA10048_SYNC_STATUS 0x1A +#define TDA10048_CONF_C4_1 0x1E +#define TDA10048_CONF_C4_2 0x1F +#define TDA10048_CODE_IN_RAM 0x20 +#define TDA10048_CHANNEL_INFO1_R 0x22 +#define TDA10048_CHANNEL_INFO2_R 0x23 +#define TDA10048_CHANNEL_INFO1 0x24 +#define TDA10048_CHANNEL_INFO2 0x25 +#define TDA10048_TIME_ERROR_R 0x26 +#define TDA10048_TIME_ERROR 0x27 +#define TDA10048_FREQ_ERROR_LSB_R 0x28 +#define TDA10048_FREQ_ERROR_MSB_R 0x29 +#define TDA10048_FREQ_ERROR_LSB 0x2A +#define TDA10048_FREQ_ERROR_MSB 0x2B +#define TDA10048_IT_SEL 0x30 +#define TDA10048_IT_STAT 0x32 +#define TDA10048_DSP_AD_LSB 0x3C +#define TDA10048_DSP_AD_MSB 0x3D +#define TDA10048_DSP_REG_LSB 0x3E +#define TDA10048_DSP_REG_MSB 0x3F +#define TDA10048_CONF_TRISTATE1 0x44 +#define TDA10048_CONF_TRISTATE2 0x45 +#define TDA10048_CONF_POLARITY 0x46 +#define TDA10048_GPIO_SP_DS0 0x48 +#define TDA10048_GPIO_SP_DS1 0x49 +#define TDA10048_GPIO_SP_DS2 0x4A +#define TDA10048_GPIO_SP_DS3 0x4B +#define TDA10048_GPIO_OUT_SEL 0x4C +#define TDA10048_GPIO_SELECT 0x4D +#define TDA10048_IC_MODE 0x4E +#define TDA10048_CONF_XO 0x50 +#define TDA10048_CONF_PLL1 0x51 +#define TDA10048_CONF_PLL2 0x52 +#define TDA10048_CONF_PLL3 0x53 +#define TDA10048_CONF_ADC 0x54 +#define TDA10048_CONF_ADC_2 0x55 +#define TDA10048_CONF_C1_1 0x60 +#define TDA10048_CONF_C1_3 0x62 +#define TDA10048_AGC_CONF 0x70 +#define TDA10048_AGC_THRESHOLD_LSB 0x72 +#define TDA10048_AGC_THRESHOLD_MSB 0x73 +#define TDA10048_AGC_RENORM 0x74 +#define TDA10048_AGC_GAINS 0x76 +#define TDA10048_AGC_TUN_MIN 0x78 +#define TDA10048_AGC_TUN_MAX 0x79 +#define TDA10048_AGC_IF_MIN 0x7A +#define TDA10048_AGC_IF_MAX 0x7B +#define TDA10048_AGC_TUN_LEVEL 0x7E +#define TDA10048_AGC_IF_LEVEL 0x7F +#define TDA10048_DIG_AGC_LEVEL 0x81 +#define TDA10048_FREQ_PHY2_LSB 0x86 +#define TDA10048_FREQ_PHY2_MSB 0x87 +#define TDA10048_TIME_INVWREF_LSB 0x88 +#define TDA10048_TIME_INVWREF_MSB 0x89 +#define TDA10048_TIME_WREF_LSB 0x8A +#define TDA10048_TIME_WREF_MID1 0x8B +#define TDA10048_TIME_WREF_MID2 0x8C +#define TDA10048_TIME_WREF_MSB 0x8D +#define TDA10048_NP_OUT 0xA2 +#define TDA10048_CELL_ID_LSB 0xA4 +#define TDA10048_CELL_ID_MSB 0xA5 +#define TDA10048_EXTTPS_ODD 0xAA +#define TDA10048_EXTTPS_EVEN 0xAB +#define TDA10048_TPS_LENGTH 0xAC +#define TDA10048_FREE_REG_1 0xB2 +#define TDA10048_FREE_REG_2 0xB3 +#define TDA10048_CONF_C3_1 0xC0 +#define TDA10048_CVBER_CTRL 0xC2 +#define TDA10048_CBER_NMAX_LSB 0xC4 +#define TDA10048_CBER_NMAX_MSB 0xC5 +#define TDA10048_CBER_LSB 0xC6 +#define TDA10048_CBER_MSB 0xC7 +#define TDA10048_VBER_LSB 0xC8 +#define TDA10048_VBER_MID 0xC9 +#define TDA10048_VBER_MSB 0xCA +#define TDA10048_CVBER_LUT 0xCC +#define TDA10048_UNCOR_CTRL 0xCD +#define TDA10048_UNCOR_CPT_LSB 0xCE +#define TDA10048_UNCOR_CPT_MSB 0xCF +#define TDA10048_SOFT_IT_C3 0xD6 +#define TDA10048_CONF_TS2 0xE0 +#define TDA10048_CONF_TS1 0xE1 + +static unsigned int debug; + +#define dprintk(level, fmt, arg...)\ + do { if (debug >= level)\ + printk(KERN_DEBUG "tda10048: " fmt, ## arg);\ + } while (0) + +struct tda10048_state { + + struct i2c_adapter *i2c; + + /* We'll cache and update the attach config settings */ + struct tda10048_config config; + struct dvb_frontend frontend; + + int fwloaded; + + u32 freq_if_hz; + u32 xtal_hz; + u32 pll_mfactor; + u32 pll_nfactor; + u32 pll_pfactor; + u32 sample_freq; + + u32 bandwidth; +}; + +static struct init_tab { + u8 reg; + u16 data; +} init_tab[] = { + { TDA10048_CONF_PLL1, 0x08 }, + { TDA10048_CONF_ADC_2, 0x00 }, + { TDA10048_CONF_C4_1, 0x00 }, + { TDA10048_CONF_PLL1, 0x0f }, + { TDA10048_CONF_PLL2, 0x0a }, + { TDA10048_CONF_PLL3, 0x43 }, + { TDA10048_FREQ_PHY2_LSB, 0x02 }, + { TDA10048_FREQ_PHY2_MSB, 0x0a }, + { TDA10048_TIME_WREF_LSB, 0xbd }, + { TDA10048_TIME_WREF_MID1, 0xe4 }, + { TDA10048_TIME_WREF_MID2, 0xa8 }, + { TDA10048_TIME_WREF_MSB, 0x02 }, + { TDA10048_TIME_INVWREF_LSB, 0x04 }, + { TDA10048_TIME_INVWREF_MSB, 0x06 }, + { TDA10048_CONF_C4_1, 0x00 }, + { TDA10048_CONF_C1_1, 0xa8 }, + { TDA10048_AGC_CONF, 0x16 }, + { TDA10048_CONF_C1_3, 0x0b }, + { TDA10048_AGC_TUN_MIN, 0x00 }, + { TDA10048_AGC_TUN_MAX, 0xff }, + { TDA10048_AGC_IF_MIN, 0x00 }, + { TDA10048_AGC_IF_MAX, 0xff }, + { TDA10048_AGC_THRESHOLD_MSB, 0x00 }, + { TDA10048_AGC_THRESHOLD_LSB, 0x70 }, + { TDA10048_CVBER_CTRL, 0x38 }, + { TDA10048_AGC_GAINS, 0x12 }, + { TDA10048_CONF_XO, 0x00 }, + { TDA10048_CONF_TS1, 0x07 }, + { TDA10048_IC_MODE, 0x00 }, + { TDA10048_CONF_TS2, 0xc0 }, + { TDA10048_CONF_TRISTATE1, 0x21 }, + { TDA10048_CONF_TRISTATE2, 0x00 }, + { TDA10048_CONF_POLARITY, 0x00 }, + { TDA10048_CONF_C4_2, 0x04 }, + { TDA10048_CONF_ADC, 0x60 }, + { TDA10048_CONF_ADC_2, 0x10 }, + { TDA10048_CONF_ADC, 0x60 }, + { TDA10048_CONF_ADC_2, 0x00 }, + { TDA10048_CONF_C1_1, 0xa8 }, + { TDA10048_UNCOR_CTRL, 0x00 }, + { TDA10048_CONF_C4_2, 0x04 }, +}; + +static struct pll_tab { + u32 clk_freq_khz; + u32 if_freq_khz; +} pll_tab[] = { + { TDA10048_CLK_4000, TDA10048_IF_36130 }, + { TDA10048_CLK_16000, TDA10048_IF_3300 }, + { TDA10048_CLK_16000, TDA10048_IF_3500 }, + { TDA10048_CLK_16000, TDA10048_IF_3800 }, + { TDA10048_CLK_16000, TDA10048_IF_4000 }, + { TDA10048_CLK_16000, TDA10048_IF_4300 }, + { TDA10048_CLK_16000, TDA10048_IF_4500 }, + { TDA10048_CLK_16000, TDA10048_IF_5000 }, + { TDA10048_CLK_16000, TDA10048_IF_36130 }, +}; + +static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) +{ + struct tda10048_config *config = &state->config; + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = config->demod_address, + .flags = 0, .buf = buf, .len = 2 }; + + dprintk(2, "%s(reg = 0x%02x, data = 0x%02x)\n", __func__, reg, data); + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk("%s: writereg error (ret == %i)\n", __func__, ret); + + return (ret != 1) ? -1 : 0; +} + +static u8 tda10048_readreg(struct tda10048_state *state, u8 reg) +{ + struct tda10048_config *config = &state->config; + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { .addr = config->demod_address, + .flags = 0, .buf = b0, .len = 1 }, + { .addr = config->demod_address, + .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + dprintk(2, "%s(reg = 0x%02x)\n", __func__, reg); + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + + return b1[0]; +} + +static int tda10048_writeregbulk(struct tda10048_state *state, u8 reg, + const u8 *data, u16 len) +{ + struct tda10048_config *config = &state->config; + int ret = -EREMOTEIO; + struct i2c_msg msg; + u8 *buf; + + dprintk(2, "%s(%d, ?, len = %d)\n", __func__, reg, len); + + buf = kmalloc(len + 1, GFP_KERNEL); + if (buf == NULL) { + ret = -ENOMEM; + goto error; + } + + *buf = reg; + memcpy(buf + 1, data, len); + + msg.addr = config->demod_address; + msg.flags = 0; + msg.buf = buf; + msg.len = len + 1; + + dprintk(2, "%s(): write len = %d\n", + __func__, msg.len); + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) { + printk(KERN_ERR "%s(): writereg error err %i\n", + __func__, ret); + ret = -EREMOTEIO; + } + +error: + kfree(buf); + + return ret; +} + +static int tda10048_set_phy2(struct dvb_frontend *fe, u32 sample_freq_hz, + u32 if_hz) +{ + struct tda10048_state *state = fe->demodulator_priv; + u64 t; + + dprintk(1, "%s()\n", __func__); + + if (sample_freq_hz == 0) + return -EINVAL; + + if (if_hz < (sample_freq_hz / 2)) { + /* PHY2 = (if2/fs) * 2^15 */ + t = if_hz; + t *= 10; + t *= 32768; + do_div(t, sample_freq_hz); + t += 5; + do_div(t, 10); + } else { + /* PHY2 = ((IF1-fs)/fs) * 2^15 */ + t = sample_freq_hz - if_hz; + t *= 10; + t *= 32768; + do_div(t, sample_freq_hz); + t += 5; + do_div(t, 10); + t = ~t + 1; + } + + tda10048_writereg(state, TDA10048_FREQ_PHY2_LSB, (u8)t); + tda10048_writereg(state, TDA10048_FREQ_PHY2_MSB, (u8)(t >> 8)); + + return 0; +} + +static int tda10048_set_wref(struct dvb_frontend *fe, u32 sample_freq_hz, + u32 bw) +{ + struct tda10048_state *state = fe->demodulator_priv; + u64 t, z; + + dprintk(1, "%s()\n", __func__); + + if (sample_freq_hz == 0) + return -EINVAL; + + /* WREF = (B / (7 * fs)) * 2^31 */ + t = bw * 10; + /* avoid warning: this decimal constant is unsigned only in ISO C90 */ + /* t *= 2147483648 on 32bit platforms */ + t *= (2048 * 1024); + t *= 1024; + z = 7 * sample_freq_hz; + do_div(t, z); + t += 5; + do_div(t, 10); + + tda10048_writereg(state, TDA10048_TIME_WREF_LSB, (u8)t); + tda10048_writereg(state, TDA10048_TIME_WREF_MID1, (u8)(t >> 8)); + tda10048_writereg(state, TDA10048_TIME_WREF_MID2, (u8)(t >> 16)); + tda10048_writereg(state, TDA10048_TIME_WREF_MSB, (u8)(t >> 24)); + + return 0; +} + +static int tda10048_set_invwref(struct dvb_frontend *fe, u32 sample_freq_hz, + u32 bw) +{ + struct tda10048_state *state = fe->demodulator_priv; + u64 t; + + dprintk(1, "%s()\n", __func__); + + if (sample_freq_hz == 0) + return -EINVAL; + + /* INVWREF = ((7 * fs) / B) * 2^5 */ + t = sample_freq_hz; + t *= 7; + t *= 32; + t *= 10; + do_div(t, bw); + t += 5; + do_div(t, 10); + + tda10048_writereg(state, TDA10048_TIME_INVWREF_LSB, (u8)t); + tda10048_writereg(state, TDA10048_TIME_INVWREF_MSB, (u8)(t >> 8)); + + return 0; +} + +static int tda10048_set_bandwidth(struct dvb_frontend *fe, + u32 bw) +{ + struct tda10048_state *state = fe->demodulator_priv; + dprintk(1, "%s(bw=%d)\n", __func__, bw); + + /* Bandwidth setting may need to be adjusted */ + switch (bw) { + case 6000000: + case 7000000: + case 8000000: + tda10048_set_wref(fe, state->sample_freq, bw); + tda10048_set_invwref(fe, state->sample_freq, bw); + break; + default: + printk(KERN_ERR "%s() invalid bandwidth\n", __func__); + return -EINVAL; + } + + state->bandwidth = bw; + + return 0; +} + +static int tda10048_set_if(struct dvb_frontend *fe, u32 bw) +{ + struct tda10048_state *state = fe->demodulator_priv; + struct tda10048_config *config = &state->config; + int i; + u32 if_freq_khz; + + dprintk(1, "%s(bw = %d)\n", __func__, bw); + + /* based on target bandwidth and clk we calculate pll factors */ + switch (bw) { + case 6000000: + if_freq_khz = config->dtv6_if_freq_khz; + break; + case 7000000: + if_freq_khz = config->dtv7_if_freq_khz; + break; + case 8000000: + if_freq_khz = config->dtv8_if_freq_khz; + break; + default: + printk(KERN_ERR "%s() no default\n", __func__); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(pll_tab); i++) { + if ((pll_tab[i].clk_freq_khz == config->clk_freq_khz) && + (pll_tab[i].if_freq_khz == if_freq_khz)) { + + state->freq_if_hz = pll_tab[i].if_freq_khz * 1000; + state->xtal_hz = pll_tab[i].clk_freq_khz * 1000; + break; + } + } + if (i == ARRAY_SIZE(pll_tab)) { + printk(KERN_ERR "%s() Incorrect attach settings\n", + __func__); + return -EINVAL; + } + + dprintk(1, "- freq_if_hz = %d\n", state->freq_if_hz); + dprintk(1, "- xtal_hz = %d\n", state->xtal_hz); + dprintk(1, "- pll_mfactor = %d\n", state->pll_mfactor); + dprintk(1, "- pll_nfactor = %d\n", state->pll_nfactor); + dprintk(1, "- pll_pfactor = %d\n", state->pll_pfactor); + + /* Calculate the sample frequency */ + state->sample_freq = state->xtal_hz * (state->pll_mfactor + 45); + state->sample_freq /= (state->pll_nfactor + 1); + state->sample_freq /= (state->pll_pfactor + 4); + dprintk(1, "- sample_freq = %d\n", state->sample_freq); + + /* Update the I/F */ + tda10048_set_phy2(fe, state->sample_freq, state->freq_if_hz); + + return 0; +} + +static int tda10048_firmware_upload(struct dvb_frontend *fe) +{ + struct tda10048_state *state = fe->demodulator_priv; + struct tda10048_config *config = &state->config; + const struct firmware *fw; + int ret; + int pos = 0; + int cnt; + u8 wlen = config->fwbulkwritelen; + + if ((wlen != TDA10048_BULKWRITE_200) && (wlen != TDA10048_BULKWRITE_50)) + wlen = TDA10048_BULKWRITE_200; + + /* request the firmware, this will block and timeout */ + printk(KERN_INFO "%s: waiting for firmware upload (%s)...\n", + __func__, + TDA10048_DEFAULT_FIRMWARE); + + ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE, + state->i2c->dev.parent); + if (ret) { + printk(KERN_ERR "%s: Upload failed. (file not found?)\n", + __func__); + return -EIO; + } else { + printk(KERN_INFO "%s: firmware read %Zu bytes.\n", + __func__, + fw->size); + ret = 0; + } + + if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) { + printk(KERN_ERR "%s: firmware incorrect size\n", __func__); + ret = -EIO; + } else { + printk(KERN_INFO "%s: firmware uploading\n", __func__); + + /* Soft reset */ + tda10048_writereg(state, TDA10048_CONF_TRISTATE1, + tda10048_readreg(state, TDA10048_CONF_TRISTATE1) + & 0xfe); + tda10048_writereg(state, TDA10048_CONF_TRISTATE1, + tda10048_readreg(state, TDA10048_CONF_TRISTATE1) + | 0x01); + + /* Put the demod into host download mode */ + tda10048_writereg(state, TDA10048_CONF_C4_1, + tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xf9); + + /* Boot the DSP */ + tda10048_writereg(state, TDA10048_CONF_C4_1, + tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x08); + + /* Prepare for download */ + tda10048_writereg(state, TDA10048_DSP_CODE_CPT, 0); + + /* Download the firmware payload */ + while (pos < fw->size) { + + if ((fw->size - pos) > wlen) + cnt = wlen; + else + cnt = fw->size - pos; + + tda10048_writeregbulk(state, TDA10048_DSP_CODE_IN, + &fw->data[pos], cnt); + + pos += cnt; + } + + ret = -EIO; + /* Wait up to 250ms for the DSP to boot */ + for (cnt = 0; cnt < 250 ; cnt += 10) { + + msleep(10); + + if (tda10048_readreg(state, TDA10048_SYNC_STATUS) + & 0x40) { + ret = 0; + break; + } + } + } + + release_firmware(fw); + + if (ret == 0) { + printk(KERN_INFO "%s: firmware uploaded\n", __func__); + state->fwloaded = 1; + } else + printk(KERN_ERR "%s: firmware upload failed\n", __func__); + + return ret; +} + +static int tda10048_set_inversion(struct dvb_frontend *fe, int inversion) +{ + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s(%d)\n", __func__, inversion); + + if (inversion == TDA10048_INVERSION_ON) + tda10048_writereg(state, TDA10048_CONF_C1_1, + tda10048_readreg(state, TDA10048_CONF_C1_1) | 0x20); + else + tda10048_writereg(state, TDA10048_CONF_C1_1, + tda10048_readreg(state, TDA10048_CONF_C1_1) & 0xdf); + + return 0; +} + +/* Retrieve the demod settings */ +static int tda10048_get_tps(struct tda10048_state *state, + struct dtv_frontend_properties *p) +{ + u8 val; + + /* Make sure the TPS regs are valid */ + if (!(tda10048_readreg(state, TDA10048_AUTO) & 0x01)) + return -EAGAIN; + + val = tda10048_readreg(state, TDA10048_OUT_CONF2); + switch ((val & 0x60) >> 5) { + case 0: + p->modulation = QPSK; + break; + case 1: + p->modulation = QAM_16; + break; + case 2: + p->modulation = QAM_64; + break; + } + switch ((val & 0x18) >> 3) { + case 0: + p->hierarchy = HIERARCHY_NONE; + break; + case 1: + p->hierarchy = HIERARCHY_1; + break; + case 2: + p->hierarchy = HIERARCHY_2; + break; + case 3: + p->hierarchy = HIERARCHY_4; + break; + } + switch (val & 0x07) { + case 0: + p->code_rate_HP = FEC_1_2; + break; + case 1: + p->code_rate_HP = FEC_2_3; + break; + case 2: + p->code_rate_HP = FEC_3_4; + break; + case 3: + p->code_rate_HP = FEC_5_6; + break; + case 4: + p->code_rate_HP = FEC_7_8; + break; + } + + val = tda10048_readreg(state, TDA10048_OUT_CONF3); + switch (val & 0x07) { + case 0: + p->code_rate_LP = FEC_1_2; + break; + case 1: + p->code_rate_LP = FEC_2_3; + break; + case 2: + p->code_rate_LP = FEC_3_4; + break; + case 3: + p->code_rate_LP = FEC_5_6; + break; + case 4: + p->code_rate_LP = FEC_7_8; + break; + } + + val = tda10048_readreg(state, TDA10048_OUT_CONF1); + switch ((val & 0x0c) >> 2) { + case 0: + p->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->guard_interval = GUARD_INTERVAL_1_4; + break; + } + switch (val & 0x03) { + case 0: + p->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->transmission_mode = TRANSMISSION_MODE_8K; + break; + } + + return 0; +} + +static int tda10048_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct tda10048_state *state = fe->demodulator_priv; + struct tda10048_config *config = &state->config; + dprintk(1, "%s(%d)\n", __func__, enable); + + if (config->disable_gate_access) + return 0; + + if (enable) + return tda10048_writereg(state, TDA10048_CONF_C4_1, + tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x02); + else + return tda10048_writereg(state, TDA10048_CONF_C4_1, + tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xfd); +} + +static int tda10048_output_mode(struct dvb_frontend *fe, int serial) +{ + struct tda10048_state *state = fe->demodulator_priv; + dprintk(1, "%s(%d)\n", __func__, serial); + + /* Ensure pins are out of tri-state */ + tda10048_writereg(state, TDA10048_CONF_TRISTATE1, 0x21); + tda10048_writereg(state, TDA10048_CONF_TRISTATE2, 0x00); + + if (serial) { + tda10048_writereg(state, TDA10048_IC_MODE, 0x80 | 0x20); + tda10048_writereg(state, TDA10048_CONF_TS2, 0xc0); + } else { + tda10048_writereg(state, TDA10048_IC_MODE, 0x00); + tda10048_writereg(state, TDA10048_CONF_TS2, 0x01); + } + + return 0; +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +/* TODO: Support manual tuning with specific params */ +static int tda10048_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s(frequency=%d)\n", __func__, p->frequency); + + /* Update the I/F pll's if the bandwidth changes */ + if (p->bandwidth_hz != state->bandwidth) { + tda10048_set_if(fe, p->bandwidth_hz); + tda10048_set_bandwidth(fe, p->bandwidth_hz); + } + + if (fe->ops.tuner_ops.set_params) { + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.set_params(fe); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* Enable demod TPS auto detection and begin acquisition */ + tda10048_writereg(state, TDA10048_AUTO, 0x57); + /* trigger cber and vber acquisition */ + tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x3B); + + return 0; +} + +/* Establish sane defaults and load firmware. */ +static int tda10048_init(struct dvb_frontend *fe) +{ + struct tda10048_state *state = fe->demodulator_priv; + struct tda10048_config *config = &state->config; + int ret = 0, i; + + dprintk(1, "%s()\n", __func__); + + /* PLL */ + init_tab[4].data = (u8)(state->pll_mfactor); + init_tab[5].data = (u8)(state->pll_nfactor) | 0x40; + + /* Apply register defaults */ + for (i = 0; i < ARRAY_SIZE(init_tab); i++) + tda10048_writereg(state, init_tab[i].reg, init_tab[i].data); + + if (state->fwloaded == 0) + ret = tda10048_firmware_upload(fe); + + /* Set either serial or parallel */ + tda10048_output_mode(fe, config->output_mode); + + /* Set inversion */ + tda10048_set_inversion(fe, config->inversion); + + /* Establish default RF values */ + tda10048_set_if(fe, 8000000); + tda10048_set_bandwidth(fe, 8000000); + + /* Ensure we leave the gate closed */ + tda10048_i2c_gate_ctrl(fe, 0); + + return ret; +} + +static int tda10048_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct tda10048_state *state = fe->demodulator_priv; + u8 reg; + + *status = 0; + + reg = tda10048_readreg(state, TDA10048_SYNC_STATUS); + + dprintk(1, "%s() status =0x%02x\n", __func__, reg); + + if (reg & 0x02) + *status |= FE_HAS_CARRIER; + + if (reg & 0x04) + *status |= FE_HAS_SIGNAL; + + if (reg & 0x08) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + *status |= FE_HAS_SYNC; + } + + return 0; +} + +static int tda10048_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct tda10048_state *state = fe->demodulator_priv; + static u32 cber_current; + u32 cber_nmax; + u64 cber_tmp; + + dprintk(1, "%s()\n", __func__); + + /* update cber on interrupt */ + if (tda10048_readreg(state, TDA10048_SOFT_IT_C3) & 0x01) { + cber_tmp = tda10048_readreg(state, TDA10048_CBER_MSB) << 8 | + tda10048_readreg(state, TDA10048_CBER_LSB); + cber_nmax = tda10048_readreg(state, TDA10048_CBER_NMAX_MSB) << 8 | + tda10048_readreg(state, TDA10048_CBER_NMAX_LSB); + cber_tmp *= 100000000; + cber_tmp *= 2; + cber_tmp = div_u64(cber_tmp, (cber_nmax * 32) + 1); + cber_current = (u32)cber_tmp; + /* retrigger cber acquisition */ + tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x39); + } + /* actual cber is (*ber)/1e8 */ + *ber = cber_current; + + return 0; +} + +static int tda10048_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + struct tda10048_state *state = fe->demodulator_priv; + u8 v; + + dprintk(1, "%s()\n", __func__); + + *signal_strength = 65535; + + v = tda10048_readreg(state, TDA10048_NP_OUT); + if (v > 0) + *signal_strength -= (v << 8) | v; + + return 0; +} + +/* SNR lookup table */ +static struct snr_tab { + u8 val; + u8 data; +} snr_tab[] = { + { 0, 0 }, + { 1, 246 }, + { 2, 215 }, + { 3, 198 }, + { 4, 185 }, + { 5, 176 }, + { 6, 168 }, + { 7, 161 }, + { 8, 155 }, + { 9, 150 }, + { 10, 146 }, + { 11, 141 }, + { 12, 138 }, + { 13, 134 }, + { 14, 131 }, + { 15, 128 }, + { 16, 125 }, + { 17, 122 }, + { 18, 120 }, + { 19, 118 }, + { 20, 115 }, + { 21, 113 }, + { 22, 111 }, + { 23, 109 }, + { 24, 107 }, + { 25, 106 }, + { 26, 104 }, + { 27, 102 }, + { 28, 101 }, + { 29, 99 }, + { 30, 98 }, + { 31, 96 }, + { 32, 95 }, + { 33, 94 }, + { 34, 92 }, + { 35, 91 }, + { 36, 90 }, + { 37, 89 }, + { 38, 88 }, + { 39, 86 }, + { 40, 85 }, + { 41, 84 }, + { 42, 83 }, + { 43, 82 }, + { 44, 81 }, + { 45, 80 }, + { 46, 79 }, + { 47, 78 }, + { 48, 77 }, + { 49, 76 }, + { 50, 76 }, + { 51, 75 }, + { 52, 74 }, + { 53, 73 }, + { 54, 72 }, + { 56, 71 }, + { 57, 70 }, + { 58, 69 }, + { 60, 68 }, + { 61, 67 }, + { 63, 66 }, + { 64, 65 }, + { 66, 64 }, + { 67, 63 }, + { 68, 62 }, + { 69, 62 }, + { 70, 61 }, + { 72, 60 }, + { 74, 59 }, + { 75, 58 }, + { 77, 57 }, + { 79, 56 }, + { 81, 55 }, + { 83, 54 }, + { 85, 53 }, + { 87, 52 }, + { 89, 51 }, + { 91, 50 }, + { 93, 49 }, + { 95, 48 }, + { 97, 47 }, + { 100, 46 }, + { 102, 45 }, + { 104, 44 }, + { 107, 43 }, + { 109, 42 }, + { 112, 41 }, + { 114, 40 }, + { 117, 39 }, + { 120, 38 }, + { 123, 37 }, + { 125, 36 }, + { 128, 35 }, + { 131, 34 }, + { 134, 33 }, + { 138, 32 }, + { 141, 31 }, + { 144, 30 }, + { 147, 29 }, + { 151, 28 }, + { 154, 27 }, + { 158, 26 }, + { 162, 25 }, + { 165, 24 }, + { 169, 23 }, + { 173, 22 }, + { 177, 21 }, + { 181, 20 }, + { 186, 19 }, + { 190, 18 }, + { 194, 17 }, + { 199, 16 }, + { 204, 15 }, + { 208, 14 }, + { 213, 13 }, + { 218, 12 }, + { 223, 11 }, + { 229, 10 }, + { 234, 9 }, + { 239, 8 }, + { 245, 7 }, + { 251, 6 }, + { 255, 5 }, +}; + +static int tda10048_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct tda10048_state *state = fe->demodulator_priv; + u8 v; + int i, ret = -EINVAL; + + dprintk(1, "%s()\n", __func__); + + v = tda10048_readreg(state, TDA10048_NP_OUT); + for (i = 0; i < ARRAY_SIZE(snr_tab); i++) { + if (v <= snr_tab[i].val) { + *snr = snr_tab[i].data; + ret = 0; + break; + } + } + + return ret; +} + +static int tda10048_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s()\n", __func__); + + *ucblocks = tda10048_readreg(state, TDA10048_UNCOR_CPT_MSB) << 8 | + tda10048_readreg(state, TDA10048_UNCOR_CPT_LSB); + /* clear the uncorrected TS packets counter when saturated */ + if (*ucblocks == 0xFFFF) + tda10048_writereg(state, TDA10048_UNCOR_CTRL, 0x80); + + return 0; +} + +static int tda10048_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s()\n", __func__); + + p->inversion = tda10048_readreg(state, TDA10048_CONF_C1_1) + & 0x20 ? INVERSION_ON : INVERSION_OFF; + + return tda10048_get_tps(state, p); +} + +static int tda10048_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void tda10048_release(struct dvb_frontend *fe) +{ + struct tda10048_state *state = fe->demodulator_priv; + dprintk(1, "%s()\n", __func__); + kfree(state); +} + +static void tda10048_establish_defaults(struct dvb_frontend *fe) +{ + struct tda10048_state *state = fe->demodulator_priv; + struct tda10048_config *config = &state->config; + + /* Validate/default the config */ + if (config->dtv6_if_freq_khz == 0) { + config->dtv6_if_freq_khz = TDA10048_IF_4300; + printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz " + "is not set (defaulting to %d)\n", + __func__, + config->dtv6_if_freq_khz); + } + + if (config->dtv7_if_freq_khz == 0) { + config->dtv7_if_freq_khz = TDA10048_IF_4300; + printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz " + "is not set (defaulting to %d)\n", + __func__, + config->dtv7_if_freq_khz); + } + + if (config->dtv8_if_freq_khz == 0) { + config->dtv8_if_freq_khz = TDA10048_IF_4300; + printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz " + "is not set (defaulting to %d)\n", + __func__, + config->dtv8_if_freq_khz); + } + + if (config->clk_freq_khz == 0) { + config->clk_freq_khz = TDA10048_CLK_16000; + printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz " + "is not set (defaulting to %d)\n", + __func__, + config->clk_freq_khz); + } +} + +static struct dvb_frontend_ops tda10048_ops; + +struct dvb_frontend *tda10048_attach(const struct tda10048_config *config, + struct i2c_adapter *i2c) +{ + struct tda10048_state *state = NULL; + + dprintk(1, "%s()\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state and clone the config */ + memcpy(&state->config, config, sizeof(*config)); + state->i2c = i2c; + state->fwloaded = config->no_firmware; + state->bandwidth = 8000000; + + /* check if the demod is present */ + if (tda10048_readreg(state, TDA10048_IDENTITY) != 0x048) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda10048_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + /* set pll */ + if (config->set_pll) { + state->pll_mfactor = config->pll_m; + state->pll_nfactor = config->pll_n; + state->pll_pfactor = config->pll_p; + } else { + state->pll_mfactor = 10; + state->pll_nfactor = 3; + state->pll_pfactor = 0; + } + + /* Establish any defaults the the user didn't pass */ + tda10048_establish_defaults(&state->frontend); + + /* Set the xtal and freq defaults */ + if (tda10048_set_if(&state->frontend, 8000000) != 0) + goto error; + + /* Default bandwidth */ + if (tda10048_set_bandwidth(&state->frontend, 8000000) != 0) + goto error; + + /* Leave the gate closed */ + tda10048_i2c_gate_ctrl(&state->frontend, 0); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(tda10048_attach); + +static struct dvb_frontend_ops tda10048_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "NXP TDA10048HN DVB-T", + .frequency_min = 177000000, + .frequency_max = 858000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER + }, + + .release = tda10048_release, + .init = tda10048_init, + .i2c_gate_ctrl = tda10048_i2c_gate_ctrl, + .set_frontend = tda10048_set_frontend, + .get_frontend = tda10048_get_frontend, + .get_tune_settings = tda10048_get_tune_settings, + .read_status = tda10048_read_status, + .read_ber = tda10048_read_ber, + .read_signal_strength = tda10048_read_signal_strength, + .read_snr = tda10048_read_snr, + .read_ucblocks = tda10048_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("NXP TDA10048HN DVB-T Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/tda10048.h b/drivers/media/dvb-frontends/tda10048.h new file mode 100644 index 00000000..5e7bf4e4 --- /dev/null +++ b/drivers/media/dvb-frontends/tda10048.h @@ -0,0 +1,90 @@ +/* + NXP TDA10048HN DVB OFDM demodulator driver + + Copyright (C) 2009 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef TDA10048_H +#define TDA10048_H + +#include +#include +#include + +struct tda10048_config { + + /* the demodulator's i2c address */ + u8 demod_address; + + /* serial/parallel output */ +#define TDA10048_PARALLEL_OUTPUT 0 +#define TDA10048_SERIAL_OUTPUT 1 + u8 output_mode; + +#define TDA10048_BULKWRITE_200 200 +#define TDA10048_BULKWRITE_50 50 + u8 fwbulkwritelen; + + /* Spectral Inversion */ +#define TDA10048_INVERSION_OFF 0 +#define TDA10048_INVERSION_ON 1 + u8 inversion; + +#define TDA10048_IF_3300 3300 +#define TDA10048_IF_3500 3500 +#define TDA10048_IF_3800 3800 +#define TDA10048_IF_4000 4000 +#define TDA10048_IF_4300 4300 +#define TDA10048_IF_4500 4500 +#define TDA10048_IF_4750 4750 +#define TDA10048_IF_5000 5000 +#define TDA10048_IF_36130 36130 + u16 dtv6_if_freq_khz; + u16 dtv7_if_freq_khz; + u16 dtv8_if_freq_khz; + +#define TDA10048_CLK_4000 4000 +#define TDA10048_CLK_16000 16000 + u16 clk_freq_khz; + + /* Disable I2C gate access */ + u8 disable_gate_access; + + bool no_firmware; + + bool set_pll; + u8 pll_m; + u8 pll_p; + u8 pll_n; +}; + +#if IS_ENABLED(CONFIG_DVB_TDA10048) +extern struct dvb_frontend *tda10048_attach( + const struct tda10048_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *tda10048_attach( + const struct tda10048_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_TDA10048 */ + +#endif /* TDA10048_H */ diff --git a/drivers/media/dvb-frontends/tda1004x.c b/drivers/media/dvb-frontends/tda1004x.c new file mode 100644 index 00000000..a2631be7 --- /dev/null +++ b/drivers/media/dvb-frontends/tda1004x.c @@ -0,0 +1,1385 @@ + /* + Driver for Philips tda1004xh OFDM Demodulator + + (c) 2003, 2004 Andrew de Quincey & Robert Schlabbach + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ +/* + * This driver needs external firmware. Please use the commands + * "/Documentation/dvb/get_dvb_firmware tda10045", + * "/Documentation/dvb/get_dvb_firmware tda10046" to + * download/extract them, and then copy them to /usr/lib/hotplug/firmware + * or /lib/firmware (depending on configuration of firmware hotplug). + */ +#define TDA10045_DEFAULT_FIRMWARE "dvb-fe-tda10045.fw" +#define TDA10046_DEFAULT_FIRMWARE "dvb-fe-tda10046.fw" + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "tda1004x.h" + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "tda1004x: " args); \ + } while (0) + +#define TDA1004X_CHIPID 0x00 +#define TDA1004X_AUTO 0x01 +#define TDA1004X_IN_CONF1 0x02 +#define TDA1004X_IN_CONF2 0x03 +#define TDA1004X_OUT_CONF1 0x04 +#define TDA1004X_OUT_CONF2 0x05 +#define TDA1004X_STATUS_CD 0x06 +#define TDA1004X_CONFC4 0x07 +#define TDA1004X_DSSPARE2 0x0C +#define TDA10045H_CODE_IN 0x0D +#define TDA10045H_FWPAGE 0x0E +#define TDA1004X_SCAN_CPT 0x10 +#define TDA1004X_DSP_CMD 0x11 +#define TDA1004X_DSP_ARG 0x12 +#define TDA1004X_DSP_DATA1 0x13 +#define TDA1004X_DSP_DATA2 0x14 +#define TDA1004X_CONFADC1 0x15 +#define TDA1004X_CONFC1 0x16 +#define TDA10045H_S_AGC 0x1a +#define TDA10046H_AGC_TUN_LEVEL 0x1a +#define TDA1004X_SNR 0x1c +#define TDA1004X_CONF_TS1 0x1e +#define TDA1004X_CONF_TS2 0x1f +#define TDA1004X_CBER_RESET 0x20 +#define TDA1004X_CBER_MSB 0x21 +#define TDA1004X_CBER_LSB 0x22 +#define TDA1004X_CVBER_LUT 0x23 +#define TDA1004X_VBER_MSB 0x24 +#define TDA1004X_VBER_MID 0x25 +#define TDA1004X_VBER_LSB 0x26 +#define TDA1004X_UNCOR 0x27 + +#define TDA10045H_CONFPLL_P 0x2D +#define TDA10045H_CONFPLL_M_MSB 0x2E +#define TDA10045H_CONFPLL_M_LSB 0x2F +#define TDA10045H_CONFPLL_N 0x30 + +#define TDA10046H_CONFPLL1 0x2D +#define TDA10046H_CONFPLL2 0x2F +#define TDA10046H_CONFPLL3 0x30 +#define TDA10046H_TIME_WREF1 0x31 +#define TDA10046H_TIME_WREF2 0x32 +#define TDA10046H_TIME_WREF3 0x33 +#define TDA10046H_TIME_WREF4 0x34 +#define TDA10046H_TIME_WREF5 0x35 + +#define TDA10045H_UNSURW_MSB 0x31 +#define TDA10045H_UNSURW_LSB 0x32 +#define TDA10045H_WREF_MSB 0x33 +#define TDA10045H_WREF_MID 0x34 +#define TDA10045H_WREF_LSB 0x35 +#define TDA10045H_MUXOUT 0x36 +#define TDA1004X_CONFADC2 0x37 + +#define TDA10045H_IOFFSET 0x38 + +#define TDA10046H_CONF_TRISTATE1 0x3B +#define TDA10046H_CONF_TRISTATE2 0x3C +#define TDA10046H_CONF_POLARITY 0x3D +#define TDA10046H_FREQ_OFFSET 0x3E +#define TDA10046H_GPIO_OUT_SEL 0x41 +#define TDA10046H_GPIO_SELECT 0x42 +#define TDA10046H_AGC_CONF 0x43 +#define TDA10046H_AGC_THR 0x44 +#define TDA10046H_AGC_RENORM 0x45 +#define TDA10046H_AGC_GAINS 0x46 +#define TDA10046H_AGC_TUN_MIN 0x47 +#define TDA10046H_AGC_TUN_MAX 0x48 +#define TDA10046H_AGC_IF_MIN 0x49 +#define TDA10046H_AGC_IF_MAX 0x4A + +#define TDA10046H_FREQ_PHY2_MSB 0x4D +#define TDA10046H_FREQ_PHY2_LSB 0x4E + +#define TDA10046H_CVBER_CTRL 0x4F +#define TDA10046H_AGC_IF_LEVEL 0x52 +#define TDA10046H_CODE_CPT 0x57 +#define TDA10046H_CODE_IN 0x58 + + +static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 }; + + dprintk("%s: reg=0x%x, data=0x%x\n", __func__, reg, data); + + msg.addr = state->config->demod_address; + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n", + __func__, reg, data, ret); + + dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__, + reg, data, ret); + return (ret != 1) ? -1 : 0; +} + +static int tda1004x_read_byte(struct tda1004x_state *state, int reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 }, + { .flags = I2C_M_RD, .buf = b1, .len = 1 }}; + + dprintk("%s: reg=0x%x\n", __func__, reg); + + msg[0].addr = state->config->demod_address; + msg[1].addr = state->config->demod_address; + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, + ret); + return -EINVAL; + } + + dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__, + reg, b1[0], ret); + return b1[0]; +} + +static int tda1004x_write_mask(struct tda1004x_state *state, int reg, int mask, int data) +{ + int val; + dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __func__, reg, + mask, data); + + // read a byte and check + val = tda1004x_read_byte(state, reg); + if (val < 0) + return val; + + // mask if off + val = val & ~mask; + val |= data & 0xff; + + // write it out again + return tda1004x_write_byteI(state, reg, val); +} + +static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned char *buf, int len) +{ + int i; + int result; + + dprintk("%s: reg=0x%x, len=0x%x\n", __func__, reg, len); + + result = 0; + for (i = 0; i < len; i++) { + result = tda1004x_write_byteI(state, reg + i, buf[i]); + if (result != 0) + break; + } + + return result; +} + +static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state) +{ + int result; + dprintk("%s\n", __func__); + + result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2); + msleep(20); + return result; +} + +static int tda1004x_disable_tuner_i2c(struct tda1004x_state *state) +{ + dprintk("%s\n", __func__); + + return tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 0); +} + +static int tda10045h_set_bandwidth(struct tda1004x_state *state, + u32 bandwidth) +{ + static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f }; + static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb }; + static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 }; + + switch (bandwidth) { + case 6000000: + tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz)); + break; + + case 7000000: + tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz)); + break; + + case 8000000: + tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz)); + break; + + default: + return -EINVAL; + } + + tda1004x_write_byteI(state, TDA10045H_IOFFSET, 0); + + return 0; +} + +static int tda10046h_set_bandwidth(struct tda1004x_state *state, + u32 bandwidth) +{ + static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 }; + static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f }; + static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d }; + + static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 }; + static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab }; + static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 }; + int tda10046_clk53m; + + if ((state->config->if_freq == TDA10046_FREQ_045) || + (state->config->if_freq == TDA10046_FREQ_052)) + tda10046_clk53m = 0; + else + tda10046_clk53m = 1; + switch (bandwidth) { + case 6000000: + if (tda10046_clk53m) + tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M, + sizeof(bandwidth_6mhz_53M)); + else + tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M, + sizeof(bandwidth_6mhz_48M)); + if (state->config->if_freq == TDA10046_FREQ_045) { + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab); + } + break; + + case 7000000: + if (tda10046_clk53m) + tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M, + sizeof(bandwidth_7mhz_53M)); + else + tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M, + sizeof(bandwidth_7mhz_48M)); + if (state->config->if_freq == TDA10046_FREQ_045) { + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00); + } + break; + + case 8000000: + if (tda10046_clk53m) + tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M, + sizeof(bandwidth_8mhz_53M)); + else + tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M, + sizeof(bandwidth_8mhz_48M)); + if (state->config->if_freq == TDA10046_FREQ_045) { + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55); + } + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int tda1004x_do_upload(struct tda1004x_state *state, + const unsigned char *mem, unsigned int len, + u8 dspCodeCounterReg, u8 dspCodeInReg) +{ + u8 buf[65]; + struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 }; + int tx_size; + int pos = 0; + + /* clear code counter */ + tda1004x_write_byteI(state, dspCodeCounterReg, 0); + fw_msg.addr = state->config->demod_address; + + i2c_lock_adapter(state->i2c); + buf[0] = dspCodeInReg; + while (pos != len) { + // work out how much to send this time + tx_size = len - pos; + if (tx_size > 0x10) + tx_size = 0x10; + + // send the chunk + memcpy(buf + 1, mem + pos, tx_size); + fw_msg.len = tx_size + 1; + if (__i2c_transfer(state->i2c, &fw_msg, 1) != 1) { + printk(KERN_ERR "tda1004x: Error during firmware upload\n"); + i2c_unlock_adapter(state->i2c); + return -EIO; + } + pos += tx_size; + + dprintk("%s: fw_pos=0x%x\n", __func__, pos); + } + i2c_unlock_adapter(state->i2c); + + /* give the DSP a chance to settle 03/10/05 Hac */ + msleep(100); + + return 0; +} + +static int tda1004x_check_upload_ok(struct tda1004x_state *state) +{ + u8 data1, data2; + unsigned long timeout; + + if (state->demod_type == TDA1004X_DEMOD_TDA10046) { + timeout = jiffies + 2 * HZ; + while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n"); + break; + } + msleep(1); + } + } else + msleep(100); + + // check upload was OK + tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP + tda1004x_write_byteI(state, TDA1004X_DSP_CMD, 0x67); + + data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1); + data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2); + if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) { + printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2); + return -EIO; + } + printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2); + return 0; +} + +static int tda10045_fwupload(struct dvb_frontend* fe) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int ret; + const struct firmware *fw; + + /* don't re-upload unless necessary */ + if (tda1004x_check_upload_ok(state) == 0) + return 0; + + /* request the firmware, this will block until someone uploads it */ + printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); + ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); + if (ret) { + printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); + return ret; + } + + /* reset chip */ + tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); + tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); + tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0); + msleep(10); + + /* set parameters */ + tda10045h_set_bandwidth(state, 8000000); + + ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN); + release_firmware(fw); + if (ret) + return ret; + printk(KERN_INFO "tda1004x: firmware upload complete\n"); + + /* wait for DSP to initialise */ + /* DSPREADY doesn't seem to work on the TDA10045H */ + msleep(100); + + return tda1004x_check_upload_ok(state); +} + +static void tda10046_init_plls(struct dvb_frontend* fe) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int tda10046_clk53m; + + if ((state->config->if_freq == TDA10046_FREQ_045) || + (state->config->if_freq == TDA10046_FREQ_052)) + tda10046_clk53m = 0; + else + tda10046_clk53m = 1; + + tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0); + if(tda10046_clk53m) { + printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n"); + tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8 + } else { + printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n"); + tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3 + } + if (state->config->xtal_freq == TDA10046_XTAL_4M ) { + dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __func__); + tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0 + } else { + dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __func__); + tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3 + } + if(tda10046_clk53m) + tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67); + else + tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72); + /* Note clock frequency is handled implicitly */ + switch (state->config->if_freq) { + case TDA10046_FREQ_045: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00); + break; + case TDA10046_FREQ_052: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7); + break; + case TDA10046_FREQ_3617: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59); + break; + case TDA10046_FREQ_3613: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f); + break; + } + tda10046h_set_bandwidth(state, 8000000); /* default bandwidth 8 MHz */ + /* let the PLLs settle */ + msleep(120); +} + +static int tda10046_fwupload(struct dvb_frontend* fe) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int ret, confc4; + const struct firmware *fw; + + /* reset + wake up chip */ + if (state->config->xtal_freq == TDA10046_XTAL_4M) { + confc4 = 0; + } else { + dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __func__); + confc4 = 0x80; + } + tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4); + + tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0); + /* set GPIO 1 and 3 */ + if (state->config->gpio_config != TDA10046_GPTRI) { + tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33); + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f); + } + /* let the clocks recover from sleep */ + msleep(10); + + /* The PLLs need to be reprogrammed after sleep */ + tda10046_init_plls(fe); + tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0); + + /* don't re-upload unless necessary */ + if (tda1004x_check_upload_ok(state) == 0) + return 0; + + /* + For i2c normal work, we need to slow down the bus speed. + However, the slow down breaks the eeprom firmware load. + So, use normal speed for eeprom booting and then restore the + i2c speed after that. Tested with MSI TV @nyware A/D board, + that comes with firmware version 29 inside their eeprom. + + It should also be noticed that no other I2C transfer should + be in course while booting from eeprom, otherwise, tda10046 + goes into an instable state. So, proper locking are needed + at the i2c bus master. + */ + printk(KERN_INFO "tda1004x: trying to boot from eeprom\n"); + tda1004x_write_byteI(state, TDA1004X_CONFC4, 4); + msleep(300); + tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4); + + /* Checks if eeprom firmware went without troubles */ + if (tda1004x_check_upload_ok(state) == 0) + return 0; + + /* eeprom firmware didn't work. Load one manually. */ + + if (state->config->request_firmware != NULL) { + /* request the firmware, this will block until someone uploads it */ + printk(KERN_INFO "tda1004x: waiting for firmware upload...\n"); + ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE); + if (ret) { + /* remain compatible to old bug: try to load with tda10045 image name */ + ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); + if (ret) { + printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); + return ret; + } else { + printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n", + TDA10046_DEFAULT_FIRMWARE); + } + } + } else { + printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n"); + return -EIO; + } + tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST + ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN); + release_firmware(fw); + return tda1004x_check_upload_ok(state); +} + +static int tda1004x_encode_fec(int fec) +{ + // convert known FEC values + switch (fec) { + case FEC_1_2: + return 0; + case FEC_2_3: + return 1; + case FEC_3_4: + return 2; + case FEC_5_6: + return 3; + case FEC_7_8: + return 4; + } + + // unsupported + return -EINVAL; +} + +static int tda1004x_decode_fec(int tdafec) +{ + // convert known FEC values + switch (tdafec) { + case 0: + return FEC_1_2; + case 1: + return FEC_2_3; + case 2: + return FEC_3_4; + case 3: + return FEC_5_6; + case 4: + return FEC_7_8; + } + + // unsupported + return -1; +} + +static int tda1004x_write(struct dvb_frontend* fe, const u8 buf[], int len) +{ + struct tda1004x_state* state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return tda1004x_write_byteI(state, buf[0], buf[1]); +} + +static int tda10045_init(struct dvb_frontend* fe) +{ + struct tda1004x_state* state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (tda10045_fwupload(fe)) { + printk("tda1004x: firmware upload failed\n"); + return -EIO; + } + + tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0); // wake up the ADC + + // tda setup + tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer + tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream + tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0); // set polarity of VAGC signal + tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0x80); // enable pulse killer + tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10); // enable auto offset + tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0x0); // no frequency offset + tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 0); // setup MPEG2 TS interface + tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0); // setup MPEG2 TS interface + tda1004x_write_mask(state, TDA1004X_VBER_MSB, 0xe0, 0xa0); // 10^6 VBER measurement bits + tda1004x_write_mask(state, TDA1004X_CONFC1, 0x10, 0); // VAGC polarity + tda1004x_write_byteI(state, TDA1004X_CONFADC1, 0x2e); + + tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk); + + return 0; +} + +static int tda10046_init(struct dvb_frontend* fe) +{ + struct tda1004x_state* state = fe->demodulator_priv; + dprintk("%s\n", __func__); + + if (tda10046_fwupload(fe)) { + printk("tda1004x: firmware upload failed\n"); + return -EIO; + } + + // tda setup + tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer + tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87); // 100 ppm crystal, select HP stream + tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88); // enable pulse killer + + switch (state->config->agc_config) { + case TDA10046_AGC_DEFAULT: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities + break; + case TDA10046_AGC_IFO_AUTO_NEG: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities + break; + case TDA10046_AGC_IFO_AUTO_POS: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00); // set AGC polarities + break; + case TDA10046_AGC_TDA827X: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup + tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold + tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities + break; + } + if (state->config->ts_mode == 0) { + tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x40); + tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7); + } else { + tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x80); + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x10, + state->config->invert_oclk << 4); + } + tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38); + tda1004x_write_mask (state, TDA10046H_CONF_TRISTATE1, 0x3e, 0x38); // Turn IF AGC output on + tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // } + tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values + tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // } + tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff); // } + tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1 + tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits + tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config + tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config + // tda1004x_write_mask(state, 0x50, 0x80, 0x80); // handle out of guard echoes + + return 0; +} + +static int tda1004x_set_fe(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache; + struct tda1004x_state* state = fe->demodulator_priv; + int tmp; + int inversion; + + dprintk("%s\n", __func__); + + if (state->demod_type == TDA1004X_DEMOD_TDA10046) { + // setup auto offset + tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x80, 0); + tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0); + + // disable agc_conf[2] + tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 0); + } + + // set frequency + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + // Hardcoded to use auto as much as possible on the TDA10045 as it + // is very unreliable if AUTO mode is _not_ used. + if (state->demod_type == TDA1004X_DEMOD_TDA10045) { + fe_params->code_rate_HP = FEC_AUTO; + fe_params->guard_interval = GUARD_INTERVAL_AUTO; + fe_params->transmission_mode = TRANSMISSION_MODE_AUTO; + } + + // Set standard params.. or put them to auto + if ((fe_params->code_rate_HP == FEC_AUTO) || + (fe_params->code_rate_LP == FEC_AUTO) || + (fe_params->modulation == QAM_AUTO) || + (fe_params->hierarchy == HIERARCHY_AUTO)) { + tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1); // enable auto + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0); /* turn off modulation bits */ + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0); // turn off hierarchy bits + tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x3f, 0); // turn off FEC bits + } else { + tda1004x_write_mask(state, TDA1004X_AUTO, 1, 0); // disable auto + + // set HP FEC + tmp = tda1004x_encode_fec(fe_params->code_rate_HP); + if (tmp < 0) + return tmp; + tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp); + + // set LP FEC + tmp = tda1004x_encode_fec(fe_params->code_rate_LP); + if (tmp < 0) + return tmp; + tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3); + + /* set modulation */ + switch (fe_params->modulation) { + case QPSK: + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 0); + break; + + case QAM_16: + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 1); + break; + + case QAM_64: + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 2); + break; + + default: + return -EINVAL; + } + + // set hierarchy + switch (fe_params->hierarchy) { + case HIERARCHY_NONE: + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0 << 5); + break; + + case HIERARCHY_1: + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 1 << 5); + break; + + case HIERARCHY_2: + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 2 << 5); + break; + + case HIERARCHY_4: + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 3 << 5); + break; + + default: + return -EINVAL; + } + } + + // set bandwidth + switch (state->demod_type) { + case TDA1004X_DEMOD_TDA10045: + tda10045h_set_bandwidth(state, fe_params->bandwidth_hz); + break; + + case TDA1004X_DEMOD_TDA10046: + tda10046h_set_bandwidth(state, fe_params->bandwidth_hz); + break; + } + + // set inversion + inversion = fe_params->inversion; + if (state->config->invert) + inversion = inversion ? INVERSION_OFF : INVERSION_ON; + switch (inversion) { + case INVERSION_OFF: + tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0); + break; + + case INVERSION_ON: + tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0x20); + break; + + default: + return -EINVAL; + } + + // set guard interval + switch (fe_params->guard_interval) { + case GUARD_INTERVAL_1_32: + tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2); + break; + + case GUARD_INTERVAL_1_16: + tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 1 << 2); + break; + + case GUARD_INTERVAL_1_8: + tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 2 << 2); + break; + + case GUARD_INTERVAL_1_4: + tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 3 << 2); + break; + + case GUARD_INTERVAL_AUTO: + tda1004x_write_mask(state, TDA1004X_AUTO, 2, 2); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2); + break; + + default: + return -EINVAL; + } + + // set transmission mode + switch (fe_params->transmission_mode) { + case TRANSMISSION_MODE_2K: + tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0 << 4); + break; + + case TRANSMISSION_MODE_8K: + tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 1 << 4); + break; + + case TRANSMISSION_MODE_AUTO: + tda1004x_write_mask(state, TDA1004X_AUTO, 4, 4); + tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0); + break; + + default: + return -EINVAL; + } + + // start the lock + switch (state->demod_type) { + case TDA1004X_DEMOD_TDA10045: + tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); + tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0); + break; + + case TDA1004X_DEMOD_TDA10046: + tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40); + msleep(1); + tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1); + break; + } + + msleep(10); + + return 0; +} + +static int tda1004x_get_fe(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache; + struct tda1004x_state* state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + // inversion status + fe_params->inversion = INVERSION_OFF; + if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20) + fe_params->inversion = INVERSION_ON; + if (state->config->invert) + fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON; + + // bandwidth + switch (state->demod_type) { + case TDA1004X_DEMOD_TDA10045: + switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) { + case 0x14: + fe_params->bandwidth_hz = 8000000; + break; + case 0xdb: + fe_params->bandwidth_hz = 7000000; + break; + case 0x4f: + fe_params->bandwidth_hz = 6000000; + break; + } + break; + case TDA1004X_DEMOD_TDA10046: + switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) { + case 0x5c: + case 0x54: + fe_params->bandwidth_hz = 8000000; + break; + case 0x6a: + case 0x60: + fe_params->bandwidth_hz = 7000000; + break; + case 0x7b: + case 0x70: + fe_params->bandwidth_hz = 6000000; + break; + } + break; + } + + // FEC + fe_params->code_rate_HP = + tda1004x_decode_fec(tda1004x_read_byte(state, TDA1004X_OUT_CONF2) & 7); + fe_params->code_rate_LP = + tda1004x_decode_fec((tda1004x_read_byte(state, TDA1004X_OUT_CONF2) >> 3) & 7); + + /* modulation */ + switch (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 3) { + case 0: + fe_params->modulation = QPSK; + break; + case 1: + fe_params->modulation = QAM_16; + break; + case 2: + fe_params->modulation = QAM_64; + break; + } + + // transmission mode + fe_params->transmission_mode = TRANSMISSION_MODE_2K; + if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10) + fe_params->transmission_mode = TRANSMISSION_MODE_8K; + + // guard interval + switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) { + case 0: + fe_params->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + fe_params->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + fe_params->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + fe_params->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + // hierarchy + switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x60) >> 5) { + case 0: + fe_params->hierarchy = HIERARCHY_NONE; + break; + case 1: + fe_params->hierarchy = HIERARCHY_1; + break; + case 2: + fe_params->hierarchy = HIERARCHY_2; + break; + case 3: + fe_params->hierarchy = HIERARCHY_4; + break; + } + + return 0; +} + +static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int status; + int cber; + int vber; + + dprintk("%s\n", __func__); + + // read status + status = tda1004x_read_byte(state, TDA1004X_STATUS_CD); + if (status == -1) + return -EIO; + + // decode + *fe_status = 0; + if (status & 4) + *fe_status |= FE_HAS_SIGNAL; + if (status & 2) + *fe_status |= FE_HAS_CARRIER; + if (status & 8) + *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + + // if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi + // is getting anything valid + if (!(*fe_status & FE_HAS_VITERBI)) { + // read the CBER + cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB); + if (cber == -1) + return -EIO; + status = tda1004x_read_byte(state, TDA1004X_CBER_MSB); + if (status == -1) + return -EIO; + cber |= (status << 8); + // The address 0x20 should be read to cope with a TDA10046 bug + tda1004x_read_byte(state, TDA1004X_CBER_RESET); + + if (cber != 65535) + *fe_status |= FE_HAS_VITERBI; + } + + // if we DO have some valid VITERBI output, but don't already have SYNC + // bytes (i.e. not LOCKED), see if the RS decoder is getting anything valid. + if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) { + // read the VBER + vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB); + if (vber == -1) + return -EIO; + status = tda1004x_read_byte(state, TDA1004X_VBER_MID); + if (status == -1) + return -EIO; + vber |= (status << 8); + status = tda1004x_read_byte(state, TDA1004X_VBER_MSB); + if (status == -1) + return -EIO; + vber |= (status & 0x0f) << 16; + // The CVBER_LUT should be read to cope with TDA10046 hardware bug + tda1004x_read_byte(state, TDA1004X_CVBER_LUT); + + // if RS has passed some valid TS packets, then we must be + // getting some SYNC bytes + if (vber < 16632) + *fe_status |= FE_HAS_SYNC; + } + + // success + dprintk("%s: fe_status=0x%x\n", __func__, *fe_status); + return 0; +} + +static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int tmp; + int reg = 0; + + dprintk("%s\n", __func__); + + // determine the register to use + switch (state->demod_type) { + case TDA1004X_DEMOD_TDA10045: + reg = TDA10045H_S_AGC; + break; + + case TDA1004X_DEMOD_TDA10046: + reg = TDA10046H_AGC_IF_LEVEL; + break; + } + + // read it + tmp = tda1004x_read_byte(state, reg); + if (tmp < 0) + return -EIO; + + *signal = (tmp << 8) | tmp; + dprintk("%s: signal=0x%x\n", __func__, *signal); + return 0; +} + +static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int tmp; + + dprintk("%s\n", __func__); + + // read it + tmp = tda1004x_read_byte(state, TDA1004X_SNR); + if (tmp < 0) + return -EIO; + tmp = 255 - tmp; + + *snr = ((tmp << 8) | tmp); + dprintk("%s: snr=0x%x\n", __func__, *snr); + return 0; +} + +static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int tmp; + int tmp2; + int counter; + + dprintk("%s\n", __func__); + + // read the UCBLOCKS and reset + counter = 0; + tmp = tda1004x_read_byte(state, TDA1004X_UNCOR); + if (tmp < 0) + return -EIO; + tmp &= 0x7f; + while (counter++ < 5) { + tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0); + tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0); + tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0); + + tmp2 = tda1004x_read_byte(state, TDA1004X_UNCOR); + if (tmp2 < 0) + return -EIO; + tmp2 &= 0x7f; + if ((tmp2 < tmp) || (tmp2 == 0)) + break; + } + + if (tmp != 0x7f) + *ucblocks = tmp; + else + *ucblocks = 0xffffffff; + + dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks); + return 0; +} + +static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int tmp; + + dprintk("%s\n", __func__); + + // read it in + tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB); + if (tmp < 0) + return -EIO; + *ber = tmp << 1; + tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB); + if (tmp < 0) + return -EIO; + *ber |= (tmp << 9); + // The address 0x20 should be read to cope with a TDA10046 bug + tda1004x_read_byte(state, TDA1004X_CBER_RESET); + + dprintk("%s: ber=0x%x\n", __func__, *ber); + return 0; +} + +static int tda1004x_sleep(struct dvb_frontend* fe) +{ + struct tda1004x_state* state = fe->demodulator_priv; + int gpio_conf; + + switch (state->demod_type) { + case TDA1004X_DEMOD_TDA10045: + tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10); + break; + + case TDA1004X_DEMOD_TDA10046: + /* set outputs to tristate */ + tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff); + /* invert GPIO 1 and 3 if desired*/ + gpio_conf = state->config->gpio_config; + if (gpio_conf >= TDA10046_GP00_I) + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, + (gpio_conf & 0x0f) ^ 0x0a); + + tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0xc0); + tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1); + break; + } + + return 0; +} + +static int tda1004x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct tda1004x_state* state = fe->demodulator_priv; + + if (enable) { + return tda1004x_enable_tuner_i2c(state); + } else { + return tda1004x_disable_tuner_i2c(state); + } +} + +static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 800; + /* Drift compensation makes no sense for DVB-T */ + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static void tda1004x_release(struct dvb_frontend* fe) +{ + struct tda1004x_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops tda10045_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Philips TDA10045H DVB-T", + .frequency_min = 51000000, + .frequency_max = 858000000, + .frequency_stepsize = 166667, + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO + }, + + .release = tda1004x_release, + + .init = tda10045_init, + .sleep = tda1004x_sleep, + .write = tda1004x_write, + .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl, + + .set_frontend = tda1004x_set_fe, + .get_frontend = tda1004x_get_fe, + .get_tune_settings = tda1004x_get_tune_settings, + + .read_status = tda1004x_read_status, + .read_ber = tda1004x_read_ber, + .read_signal_strength = tda1004x_read_signal_strength, + .read_snr = tda1004x_read_snr, + .read_ucblocks = tda1004x_read_ucblocks, +}; + +struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, + struct i2c_adapter* i2c) +{ + struct tda1004x_state *state; + int id; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL); + if (!state) { + printk(KERN_ERR "Can't allocate memory for tda10045 state\n"); + return NULL; + } + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->demod_type = TDA1004X_DEMOD_TDA10045; + + /* check if the demod is there */ + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } + + if (id != 0x25) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); + kfree(state); + return NULL; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda10045_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +static struct dvb_frontend_ops tda10046_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Philips TDA10046H DVB-T", + .frequency_min = 51000000, + .frequency_max = 858000000, + .frequency_stepsize = 166667, + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO + }, + + .release = tda1004x_release, + + .init = tda10046_init, + .sleep = tda1004x_sleep, + .write = tda1004x_write, + .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl, + + .set_frontend = tda1004x_set_fe, + .get_frontend = tda1004x_get_fe, + .get_tune_settings = tda1004x_get_tune_settings, + + .read_status = tda1004x_read_status, + .read_ber = tda1004x_read_ber, + .read_signal_strength = tda1004x_read_signal_strength, + .read_snr = tda1004x_read_snr, + .read_ucblocks = tda1004x_read_ucblocks, +}; + +struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, + struct i2c_adapter* i2c) +{ + struct tda1004x_state *state; + int id; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL); + if (!state) { + printk(KERN_ERR "Can't allocate memory for tda10046 state\n"); + return NULL; + } + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->demod_type = TDA1004X_DEMOD_TDA10046; + + /* check if the demod is there */ + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } + if (id != 0x46) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); + kfree(state); + return NULL; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda10046_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Philips TDA10045H & TDA10046H DVB-T Demodulator"); +MODULE_AUTHOR("Andrew de Quincey & Robert Schlabbach"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(tda10045_attach); +EXPORT_SYMBOL(tda10046_attach); diff --git a/drivers/media/dvb-frontends/tda1004x.h b/drivers/media/dvb-frontends/tda1004x.h new file mode 100644 index 00000000..dd283fbb --- /dev/null +++ b/drivers/media/dvb-frontends/tda1004x.h @@ -0,0 +1,149 @@ + /* + Driver for Philips tda1004xh OFDM Frontend + + (c) 2004 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#ifndef TDA1004X_H +#define TDA1004X_H + +#include +#include + +enum tda10046_xtal { + TDA10046_XTAL_4M, + TDA10046_XTAL_16M, +}; + +enum tda10046_agc { + TDA10046_AGC_DEFAULT, /* original configuration */ + TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */ + TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */ + TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */ +}; + +/* Many (hybrid) boards use GPIO 1 and 3 + GPIO1 analog - dvb switch + GPIO3 firmware eeprom address switch +*/ +enum tda10046_gpio { + TDA10046_GPTRI = 0x00, /* All GPIOs tristate */ + TDA10046_GP00 = 0x40, /* GPIO3=0, GPIO1=0 */ + TDA10046_GP01 = 0x42, /* GPIO3=0, GPIO1=1 */ + TDA10046_GP10 = 0x48, /* GPIO3=1, GPIO1=0 */ + TDA10046_GP11 = 0x4a, /* GPIO3=1, GPIO1=1 */ + TDA10046_GP00_I = 0x80, /* GPIO3=0, GPIO1=0, invert in sleep mode*/ + TDA10046_GP01_I = 0x82, /* GPIO3=0, GPIO1=1, invert in sleep mode */ + TDA10046_GP10_I = 0x88, /* GPIO3=1, GPIO1=0, invert in sleep mode */ + TDA10046_GP11_I = 0x8a, /* GPIO3=1, GPIO1=1, invert in sleep mode */ +}; + +enum tda10046_if { + TDA10046_FREQ_3617, /* original config, 36,166 MHZ */ + TDA10046_FREQ_3613, /* 36,13 MHZ */ + TDA10046_FREQ_045, /* low IF, 4.0, 4.5, or 5.0 MHZ */ + TDA10046_FREQ_052, /* low IF, 5.1667 MHZ for tda9889 */ +}; + +enum tda10046_tsout { + TDA10046_TS_PARALLEL = 0x00, /* parallel transport stream, default */ + TDA10046_TS_SERIAL = 0x01, /* serial transport stream */ +}; + +struct tda1004x_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* does the "inversion" need inverted? */ + u8 invert; + + /* Does the OCLK signal need inverted? */ + u8 invert_oclk; + + /* parallel or serial transport stream */ + enum tda10046_tsout ts_mode; + + /* Xtal frequency, 4 or 16MHz*/ + enum tda10046_xtal xtal_freq; + + /* IF frequency */ + enum tda10046_if if_freq; + + /* AGC configuration */ + enum tda10046_agc agc_config; + + /* setting of GPIO1 and 3 */ + enum tda10046_gpio gpio_config; + + /* slave address and configuration of the tuner */ + u8 tuner_address; + u8 antenna_switch; + + /* if the board uses another I2c Bridge (tda8290), its address */ + u8 i2c_gate; + + /* request firmware for device */ + int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); +}; + +enum tda1004x_demod { + TDA1004X_DEMOD_TDA10045, + TDA1004X_DEMOD_TDA10046, +}; + +struct tda1004x_state { + struct i2c_adapter* i2c; + const struct tda1004x_config* config; + struct dvb_frontend frontend; + + /* private demod data */ + enum tda1004x_demod demod_type; +}; + +#if IS_ENABLED(CONFIG_DVB_TDA1004X) +extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, + struct i2c_adapter* i2c); + +extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_TDA1004X + +static inline int tda1004x_writereg(struct dvb_frontend *fe, u8 reg, u8 val) { + int r = 0; + u8 buf[] = {reg, val}; + if (fe->ops.write) + r = fe->ops.write(fe, buf, 2); + return r; +} + +#endif // TDA1004X_H diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c new file mode 100644 index 00000000..def7812d --- /dev/null +++ b/drivers/media/dvb-frontends/tda10071.c @@ -0,0 +1,1322 @@ +/* + * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver + * + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "tda10071_priv.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +static struct dvb_frontend_ops tda10071_ops; + +/* write multiple registers */ +static int tda10071_wr_regs(struct tda10071_priv *priv, u8 reg, u8 *val, + int len) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg.demod_i2c_addr, + .flags = 0, + .len = 1 + len, + .buf = buf, + } + }; + + if (1 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + buf[0] = reg; + memcpy(&buf[1], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple registers */ +static int tda10071_rd_regs(struct tda10071_priv *priv, u8 reg, u8 *val, + int len) +{ + int ret; + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg[2] = { + { + .addr = priv->cfg.demod_i2c_addr, + .flags = 0, + .len = 1, + .buf = ®, + }, { + .addr = priv->cfg.demod_i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = buf, + } + }; + + if (len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + memcpy(val, buf, len); + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* write single register */ +static int tda10071_wr_reg(struct tda10071_priv *priv, u8 reg, u8 val) +{ + return tda10071_wr_regs(priv, reg, &val, 1); +} + +/* read single register */ +static int tda10071_rd_reg(struct tda10071_priv *priv, u8 reg, u8 *val) +{ + return tda10071_rd_regs(priv, reg, val, 1); +} + +/* write single register with mask */ +static int tda10071_wr_reg_mask(struct tda10071_priv *priv, + u8 reg, u8 val, u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = tda10071_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return tda10071_wr_regs(priv, reg, &val, 1); +} + +/* read single register with mask */ +static int tda10071_rd_reg_mask(struct tda10071_priv *priv, + u8 reg, u8 *val, u8 mask) +{ + int ret, i; + u8 tmp; + + ret = tda10071_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + tmp &= mask; + + /* find position of the first bit */ + for (i = 0; i < 8; i++) { + if ((mask >> i) & 0x01) + break; + } + *val = tmp >> i; + + return 0; +} + +/* execute firmware command */ +static int tda10071_cmd_execute(struct tda10071_priv *priv, + struct tda10071_cmd *cmd) +{ + int ret, i; + u8 tmp; + + if (!priv->warm) { + ret = -EFAULT; + goto error; + } + + /* write cmd and args for firmware */ + ret = tda10071_wr_regs(priv, 0x00, cmd->args, cmd->len); + if (ret) + goto error; + + /* start cmd execution */ + ret = tda10071_wr_reg(priv, 0x1f, 1); + if (ret) + goto error; + + /* wait cmd execution terminate */ + for (i = 1000, tmp = 1; i && tmp; i--) { + ret = tda10071_rd_reg(priv, 0x1f, &tmp); + if (ret) + goto error; + + usleep_range(200, 5000); + } + + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); + + if (i == 0) { + ret = -ETIMEDOUT; + goto error; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_set_tone(struct dvb_frontend *fe, + fe_sec_tone_mode_t fe_sec_tone_mode) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret; + u8 tone; + + if (!priv->warm) { + ret = -EFAULT; + goto error; + } + + dev_dbg(&priv->i2c->dev, "%s: tone_mode=%d\n", __func__, + fe_sec_tone_mode); + + switch (fe_sec_tone_mode) { + case SEC_TONE_ON: + tone = 1; + break; + case SEC_TONE_OFF: + tone = 0; + break; + default: + dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_tone_mode\n", + __func__); + ret = -EINVAL; + goto error; + } + + cmd.args[0] = CMD_LNB_PCB_CONFIG; + cmd.args[1] = 0; + cmd.args[2] = 0x00; + cmd.args[3] = 0x00; + cmd.args[4] = tone; + cmd.len = 5; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t fe_sec_voltage) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret; + u8 voltage; + + if (!priv->warm) { + ret = -EFAULT; + goto error; + } + + dev_dbg(&priv->i2c->dev, "%s: voltage=%d\n", __func__, fe_sec_voltage); + + switch (fe_sec_voltage) { + case SEC_VOLTAGE_13: + voltage = 0; + break; + case SEC_VOLTAGE_18: + voltage = 1; + break; + case SEC_VOLTAGE_OFF: + voltage = 0; + break; + default: + dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_voltage\n", + __func__); + ret = -EINVAL; + goto error; + } + + cmd.args[0] = CMD_LNB_SET_DC_LEVEL; + cmd.args[1] = 0; + cmd.args[2] = voltage; + cmd.len = 3; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_diseqc_send_master_cmd(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *diseqc_cmd) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret, i; + u8 tmp; + + if (!priv->warm) { + ret = -EFAULT; + goto error; + } + + dev_dbg(&priv->i2c->dev, "%s: msg_len=%d\n", __func__, + diseqc_cmd->msg_len); + + if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 6) { + ret = -EINVAL; + goto error; + } + + /* wait LNB TX */ + for (i = 500, tmp = 0; i && !tmp; i--) { + ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x01); + if (ret) + goto error; + + usleep_range(10000, 20000); + } + + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); + + if (i == 0) { + ret = -ETIMEDOUT; + goto error; + } + + ret = tda10071_wr_reg_mask(priv, 0x47, 0x00, 0x01); + if (ret) + goto error; + + cmd.args[0] = CMD_LNB_SEND_DISEQC; + cmd.args[1] = 0; + cmd.args[2] = 0; + cmd.args[3] = 0; + cmd.args[4] = 2; + cmd.args[5] = 0; + cmd.args[6] = diseqc_cmd->msg_len; + memcpy(&cmd.args[7], diseqc_cmd->msg, diseqc_cmd->msg_len); + cmd.len = 7 + diseqc_cmd->msg_len; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_diseqc_recv_slave_reply(struct dvb_frontend *fe, + struct dvb_diseqc_slave_reply *reply) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret, i; + u8 tmp; + + if (!priv->warm) { + ret = -EFAULT; + goto error; + } + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + /* wait LNB RX */ + for (i = 500, tmp = 0; i && !tmp; i--) { + ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x02); + if (ret) + goto error; + + usleep_range(10000, 20000); + } + + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); + + if (i == 0) { + ret = -ETIMEDOUT; + goto error; + } + + /* reply len */ + ret = tda10071_rd_reg(priv, 0x46, &tmp); + if (ret) + goto error; + + reply->msg_len = tmp & 0x1f; /* [4:0] */ + if (reply->msg_len > sizeof(reply->msg)) + reply->msg_len = sizeof(reply->msg); /* truncate API max */ + + /* read reply */ + cmd.args[0] = CMD_LNB_UPDATE_REPLY; + cmd.args[1] = 0; + cmd.len = 2; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + ret = tda10071_rd_regs(priv, cmd.len, reply->msg, reply->msg_len); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t fe_sec_mini_cmd) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret, i; + u8 tmp, burst; + + if (!priv->warm) { + ret = -EFAULT; + goto error; + } + + dev_dbg(&priv->i2c->dev, "%s: fe_sec_mini_cmd=%d\n", __func__, + fe_sec_mini_cmd); + + switch (fe_sec_mini_cmd) { + case SEC_MINI_A: + burst = 0; + break; + case SEC_MINI_B: + burst = 1; + break; + default: + dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_mini_cmd\n", + __func__); + ret = -EINVAL; + goto error; + } + + /* wait LNB TX */ + for (i = 500, tmp = 0; i && !tmp; i--) { + ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x01); + if (ret) + goto error; + + usleep_range(10000, 20000); + } + + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); + + if (i == 0) { + ret = -ETIMEDOUT; + goto error; + } + + ret = tda10071_wr_reg_mask(priv, 0x47, 0x00, 0x01); + if (ret) + goto error; + + cmd.args[0] = CMD_LNB_SEND_TONEBURST; + cmd.args[1] = 0; + cmd.args[2] = burst; + cmd.len = 3; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + int ret; + u8 tmp; + + *status = 0; + + if (!priv->warm) { + ret = 0; + goto error; + } + + ret = tda10071_rd_reg(priv, 0x39, &tmp); + if (ret) + goto error; + + if (tmp & 0x01) /* tuner PLL */ + *status |= FE_HAS_SIGNAL; + if (tmp & 0x02) /* demod PLL */ + *status |= FE_HAS_CARRIER; + if (tmp & 0x04) /* viterbi or LDPC*/ + *status |= FE_HAS_VITERBI; + if (tmp & 0x08) /* RS or BCH */ + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + + priv->fe_status = *status; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; + + if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) { + *snr = 0; + ret = 0; + goto error; + } + + ret = tda10071_rd_regs(priv, 0x3a, buf, 2); + if (ret) + goto error; + + /* Es/No dBx10 */ + *snr = buf[0] << 8 | buf[1]; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret; + u8 tmp; + + if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) { + *strength = 0; + ret = 0; + goto error; + } + + cmd.args[0] = CMD_GET_AGCACC; + cmd.args[1] = 0; + cmd.len = 2; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + /* input power estimate dBm */ + ret = tda10071_rd_reg(priv, 0x50, &tmp); + if (ret) + goto error; + + if (tmp < 181) + tmp = 181; /* -75 dBm */ + else if (tmp > 236) + tmp = 236; /* -20 dBm */ + + /* scale value to 0x0000-0xffff */ + *strength = (tmp-181) * 0xffff / (236-181); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret, i, len; + u8 tmp, reg, buf[8]; + + if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) { + *ber = priv->ber = 0; + ret = 0; + goto error; + } + + switch (priv->delivery_system) { + case SYS_DVBS: + reg = 0x4c; + len = 8; + i = 1; + break; + case SYS_DVBS2: + reg = 0x4d; + len = 4; + i = 0; + break; + default: + *ber = priv->ber = 0; + return 0; + } + + ret = tda10071_rd_reg(priv, reg, &tmp); + if (ret) + goto error; + + if (priv->meas_count[i] == tmp) { + dev_dbg(&priv->i2c->dev, "%s: meas not ready=%02x\n", __func__, + tmp); + *ber = priv->ber; + return 0; + } else { + priv->meas_count[i] = tmp; + } + + cmd.args[0] = CMD_BER_UPDATE_COUNTERS; + cmd.args[1] = 0; + cmd.args[2] = i; + cmd.len = 3; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + ret = tda10071_rd_regs(priv, cmd.len, buf, len); + if (ret) + goto error; + + if (priv->delivery_system == SYS_DVBS) { + *ber = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3]; + priv->ucb += (buf[4] << 8) | buf[5]; + } else { + *ber = (buf[0] << 8) | buf[1]; + } + priv->ber = *ber; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + int ret = 0; + + if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) { + *ucblocks = 0; + goto error; + } + + /* UCB is updated when BER is read. Assume BER is read anyway. */ + + *ucblocks = priv->ucb; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_set_frontend(struct dvb_frontend *fe) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i; + u8 mode, rolloff, pilot, inversion, div; + fe_modulation_t modulation; + + dev_dbg(&priv->i2c->dev, "%s: delivery_system=%d modulation=%d " \ + "frequency=%d symbol_rate=%d inversion=%d pilot=%d " \ + "rolloff=%d\n", __func__, c->delivery_system, c->modulation, + c->frequency, c->symbol_rate, c->inversion, c->pilot, + c->rolloff); + + priv->delivery_system = SYS_UNDEFINED; + + if (!priv->warm) { + ret = -EFAULT; + goto error; + } + + switch (c->inversion) { + case INVERSION_OFF: + inversion = 1; + break; + case INVERSION_ON: + inversion = 0; + break; + case INVERSION_AUTO: + /* 2 = auto; try first on then off + * 3 = auto; try first off then on */ + inversion = 3; + break; + default: + dev_dbg(&priv->i2c->dev, "%s: invalid inversion\n", __func__); + ret = -EINVAL; + goto error; + } + + switch (c->delivery_system) { + case SYS_DVBS: + modulation = QPSK; + rolloff = 0; + pilot = 2; + break; + case SYS_DVBS2: + modulation = c->modulation; + + switch (c->rolloff) { + case ROLLOFF_20: + rolloff = 2; + break; + case ROLLOFF_25: + rolloff = 1; + break; + case ROLLOFF_35: + rolloff = 0; + break; + case ROLLOFF_AUTO: + default: + dev_dbg(&priv->i2c->dev, "%s: invalid rolloff\n", + __func__); + ret = -EINVAL; + goto error; + } + + switch (c->pilot) { + case PILOT_OFF: + pilot = 0; + break; + case PILOT_ON: + pilot = 1; + break; + case PILOT_AUTO: + pilot = 2; + break; + default: + dev_dbg(&priv->i2c->dev, "%s: invalid pilot\n", + __func__); + ret = -EINVAL; + goto error; + } + break; + default: + dev_dbg(&priv->i2c->dev, "%s: invalid delivery_system\n", + __func__); + ret = -EINVAL; + goto error; + } + + for (i = 0, mode = 0xff; i < ARRAY_SIZE(TDA10071_MODCOD); i++) { + if (c->delivery_system == TDA10071_MODCOD[i].delivery_system && + modulation == TDA10071_MODCOD[i].modulation && + c->fec_inner == TDA10071_MODCOD[i].fec) { + mode = TDA10071_MODCOD[i].val; + dev_dbg(&priv->i2c->dev, "%s: mode found=%02x\n", + __func__, mode); + break; + } + } + + if (mode == 0xff) { + dev_dbg(&priv->i2c->dev, "%s: invalid parameter combination\n", + __func__); + ret = -EINVAL; + goto error; + } + + if (c->symbol_rate <= 5000000) + div = 14; + else + div = 4; + + ret = tda10071_wr_reg(priv, 0x81, div); + if (ret) + goto error; + + ret = tda10071_wr_reg(priv, 0xe3, div); + if (ret) + goto error; + + cmd.args[0] = CMD_CHANGE_CHANNEL; + cmd.args[1] = 0; + cmd.args[2] = mode; + cmd.args[3] = (c->frequency >> 16) & 0xff; + cmd.args[4] = (c->frequency >> 8) & 0xff; + cmd.args[5] = (c->frequency >> 0) & 0xff; + cmd.args[6] = ((c->symbol_rate / 1000) >> 8) & 0xff; + cmd.args[7] = ((c->symbol_rate / 1000) >> 0) & 0xff; + cmd.args[8] = (tda10071_ops.info.frequency_tolerance >> 8) & 0xff; + cmd.args[9] = (tda10071_ops.info.frequency_tolerance >> 0) & 0xff; + cmd.args[10] = rolloff; + cmd.args[11] = inversion; + cmd.args[12] = pilot; + cmd.args[13] = 0x00; + cmd.args[14] = 0x00; + cmd.len = 15; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + priv->delivery_system = c->delivery_system; + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_get_frontend(struct dvb_frontend *fe) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i; + u8 buf[5], tmp; + + if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) { + ret = -EFAULT; + goto error; + } + + ret = tda10071_rd_regs(priv, 0x30, buf, 5); + if (ret) + goto error; + + tmp = buf[0] & 0x3f; + for (i = 0; i < ARRAY_SIZE(TDA10071_MODCOD); i++) { + if (tmp == TDA10071_MODCOD[i].val) { + c->modulation = TDA10071_MODCOD[i].modulation; + c->fec_inner = TDA10071_MODCOD[i].fec; + c->delivery_system = TDA10071_MODCOD[i].delivery_system; + } + } + + switch ((buf[1] >> 0) & 0x01) { + case 0: + c->inversion = INVERSION_OFF; + break; + case 1: + c->inversion = INVERSION_ON; + break; + } + + switch ((buf[1] >> 7) & 0x01) { + case 0: + c->pilot = PILOT_OFF; + break; + case 1: + c->pilot = PILOT_ON; + break; + } + + c->frequency = (buf[2] << 16) | (buf[3] << 8) | (buf[4] << 0); + + ret = tda10071_rd_regs(priv, 0x52, buf, 3); + if (ret) + goto error; + + c->symbol_rate = (buf[0] << 16) | (buf[1] << 8) | (buf[2] << 0); + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_init(struct dvb_frontend *fe) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret, i, len, remaining, fw_size; + const struct firmware *fw; + u8 *fw_file = TDA10071_FIRMWARE; + u8 tmp, buf[4]; + struct tda10071_reg_val_mask tab[] = { + { 0xcd, 0x00, 0x07 }, + { 0x80, 0x00, 0x02 }, + { 0xcd, 0x00, 0xc0 }, + { 0xce, 0x00, 0x1b }, + { 0x9d, 0x00, 0x01 }, + { 0x9d, 0x00, 0x02 }, + { 0x9e, 0x00, 0x01 }, + { 0x87, 0x00, 0x80 }, + { 0xce, 0x00, 0x08 }, + { 0xce, 0x00, 0x10 }, + }; + struct tda10071_reg_val_mask tab2[] = { + { 0xf1, 0x70, 0xff }, + { 0x88, priv->cfg.pll_multiplier, 0x3f }, + { 0x89, 0x00, 0x10 }, + { 0x89, 0x10, 0x10 }, + { 0xc0, 0x01, 0x01 }, + { 0xc0, 0x00, 0x01 }, + { 0xe0, 0xff, 0xff }, + { 0xe0, 0x00, 0xff }, + { 0x96, 0x1e, 0x7e }, + { 0x8b, 0x08, 0x08 }, + { 0x8b, 0x00, 0x08 }, + { 0x8f, 0x1a, 0x7e }, + { 0x8c, 0x68, 0xff }, + { 0x8d, 0x08, 0xff }, + { 0x8e, 0x4c, 0xff }, + { 0x8f, 0x01, 0x01 }, + { 0x8b, 0x04, 0x04 }, + { 0x8b, 0x00, 0x04 }, + { 0x87, 0x05, 0x07 }, + { 0x80, 0x00, 0x20 }, + { 0xc8, 0x01, 0xff }, + { 0xb4, 0x47, 0xff }, + { 0xb5, 0x9c, 0xff }, + { 0xb6, 0x7d, 0xff }, + { 0xba, 0x00, 0x03 }, + { 0xb7, 0x47, 0xff }, + { 0xb8, 0x9c, 0xff }, + { 0xb9, 0x7d, 0xff }, + { 0xba, 0x00, 0x0c }, + { 0xc8, 0x00, 0xff }, + { 0xcd, 0x00, 0x04 }, + { 0xcd, 0x00, 0x20 }, + { 0xe8, 0x02, 0xff }, + { 0xcf, 0x20, 0xff }, + { 0x9b, 0xd7, 0xff }, + { 0x9a, 0x01, 0x03 }, + { 0xa8, 0x05, 0x0f }, + { 0xa8, 0x65, 0xf0 }, + { 0xa6, 0xa0, 0xf0 }, + { 0x9d, 0x50, 0xfc }, + { 0x9e, 0x20, 0xe0 }, + { 0xa3, 0x1c, 0x7c }, + { 0xd5, 0x03, 0x03 }, + }; + + /* firmware status */ + ret = tda10071_rd_reg(priv, 0x51, &tmp); + if (ret) + goto error; + + if (!tmp) { + /* warm state - wake up device from sleep */ + priv->warm = 1; + + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = tda10071_wr_reg_mask(priv, tab[i].reg, + tab[i].val, tab[i].mask); + if (ret) + goto error; + } + + cmd.args[0] = CMD_SET_SLEEP_MODE; + cmd.args[1] = 0; + cmd.args[2] = 0; + cmd.len = 3; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + } else { + /* cold state - try to download firmware */ + priv->warm = 0; + + /* request the firmware, this will block and timeout */ + ret = request_firmware(&fw, fw_file, priv->i2c->dev.parent); + if (ret) { + dev_err(&priv->i2c->dev, "%s: did not find the " \ + "firmware file. (%s) Please see " \ + "linux/Documentation/dvb/ for more " \ + "details on firmware-problems. (%d)\n", + KBUILD_MODNAME, fw_file, ret); + goto error; + } + + /* init */ + for (i = 0; i < ARRAY_SIZE(tab2); i++) { + ret = tda10071_wr_reg_mask(priv, tab2[i].reg, + tab2[i].val, tab2[i].mask); + if (ret) + goto error_release_firmware; + } + + /* download firmware */ + ret = tda10071_wr_reg(priv, 0xe0, 0x7f); + if (ret) + goto error_release_firmware; + + ret = tda10071_wr_reg(priv, 0xf7, 0x81); + if (ret) + goto error_release_firmware; + + ret = tda10071_wr_reg(priv, 0xf8, 0x00); + if (ret) + goto error_release_firmware; + + ret = tda10071_wr_reg(priv, 0xf9, 0x00); + if (ret) + goto error_release_firmware; + + dev_info(&priv->i2c->dev, "%s: found a '%s' in cold state, " \ + "will try to load a firmware\n", KBUILD_MODNAME, + tda10071_ops.info.name); + dev_info(&priv->i2c->dev, "%s: downloading firmware from " \ + "file '%s'\n", KBUILD_MODNAME, fw_file); + + /* do not download last byte */ + fw_size = fw->size - 1; + + for (remaining = fw_size; remaining > 0; + remaining -= (priv->cfg.i2c_wr_max - 1)) { + len = remaining; + if (len > (priv->cfg.i2c_wr_max - 1)) + len = (priv->cfg.i2c_wr_max - 1); + + ret = tda10071_wr_regs(priv, 0xfa, + (u8 *) &fw->data[fw_size - remaining], len); + if (ret) { + dev_err(&priv->i2c->dev, "%s: firmware " \ + "download failed=%d\n", + KBUILD_MODNAME, ret); + if (ret) + goto error_release_firmware; + } + } + release_firmware(fw); + + ret = tda10071_wr_reg(priv, 0xf7, 0x0c); + if (ret) + goto error; + + ret = tda10071_wr_reg(priv, 0xe0, 0x00); + if (ret) + goto error; + + /* wait firmware start */ + msleep(250); + + /* firmware status */ + ret = tda10071_rd_reg(priv, 0x51, &tmp); + if (ret) + goto error; + + if (tmp) { + dev_info(&priv->i2c->dev, "%s: firmware did not run\n", + KBUILD_MODNAME); + ret = -EFAULT; + goto error; + } else { + priv->warm = 1; + } + + cmd.args[0] = CMD_GET_FW_VERSION; + cmd.len = 1; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + ret = tda10071_rd_regs(priv, cmd.len, buf, 4); + if (ret) + goto error; + + dev_info(&priv->i2c->dev, "%s: firmware version %d.%d.%d.%d\n", + KBUILD_MODNAME, buf[0], buf[1], buf[2], buf[3]); + dev_info(&priv->i2c->dev, "%s: found a '%s' in warm state\n", + KBUILD_MODNAME, tda10071_ops.info.name); + + ret = tda10071_rd_regs(priv, 0x81, buf, 2); + if (ret) + goto error; + + cmd.args[0] = CMD_DEMOD_INIT; + cmd.args[1] = ((priv->cfg.xtal / 1000) >> 8) & 0xff; + cmd.args[2] = ((priv->cfg.xtal / 1000) >> 0) & 0xff; + cmd.args[3] = buf[0]; + cmd.args[4] = buf[1]; + cmd.args[5] = priv->cfg.pll_multiplier; + cmd.args[6] = priv->cfg.spec_inv; + cmd.args[7] = 0x00; + cmd.len = 8; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + cmd.args[0] = CMD_TUNER_INIT; + cmd.args[1] = 0x00; + cmd.args[2] = 0x00; + cmd.args[3] = 0x00; + cmd.args[4] = 0x00; + cmd.args[5] = (priv->cfg.tuner_i2c_addr) ? priv->cfg.tuner_i2c_addr : 0x14; + cmd.args[6] = 0x00; + cmd.args[7] = 0x03; + cmd.args[8] = 0x02; + cmd.args[9] = 0x02; + cmd.args[10] = 0x00; + cmd.args[11] = 0x00; + cmd.args[12] = 0x00; + cmd.args[13] = 0x00; + cmd.args[14] = 0x00; + cmd.len = 15; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + cmd.args[0] = CMD_MPEG_CONFIG; + cmd.args[1] = 0; + cmd.args[2] = priv->cfg.ts_mode; + cmd.args[3] = 0x00; + cmd.args[4] = 0x04; + cmd.args[5] = 0x00; + cmd.len = 6; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + ret = tda10071_wr_reg_mask(priv, 0xf0, 0x01, 0x01); + if (ret) + goto error; + + cmd.args[0] = CMD_LNB_CONFIG; + cmd.args[1] = 0; + cmd.args[2] = 150; + cmd.args[3] = 3; + cmd.args[4] = 22; + cmd.args[5] = 1; + cmd.args[6] = 1; + cmd.args[7] = 30; + cmd.args[8] = 30; + cmd.args[9] = 30; + cmd.args[10] = 30; + cmd.len = 11; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + cmd.args[0] = CMD_BER_CONTROL; + cmd.args[1] = 0; + cmd.args[2] = 14; + cmd.args[3] = 14; + cmd.len = 4; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + } + + return ret; +error_release_firmware: + release_firmware(fw); +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_sleep(struct dvb_frontend *fe) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + struct tda10071_cmd cmd; + int ret, i; + struct tda10071_reg_val_mask tab[] = { + { 0xcd, 0x07, 0x07 }, + { 0x80, 0x02, 0x02 }, + { 0xcd, 0xc0, 0xc0 }, + { 0xce, 0x1b, 0x1b }, + { 0x9d, 0x01, 0x01 }, + { 0x9d, 0x02, 0x02 }, + { 0x9e, 0x01, 0x01 }, + { 0x87, 0x80, 0x80 }, + { 0xce, 0x08, 0x08 }, + { 0xce, 0x10, 0x10 }, + }; + + if (!priv->warm) { + ret = -EFAULT; + goto error; + } + + cmd.args[0] = CMD_SET_SLEEP_MODE; + cmd.args[1] = 0; + cmd.args[2] = 1; + cmd.len = 3; + ret = tda10071_cmd_execute(priv, &cmd); + if (ret) + goto error; + + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = tda10071_wr_reg_mask(priv, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret) + goto error; + } + + return ret; +error: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int tda10071_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 8000; + s->step_size = 0; + s->max_drift = 0; + + return 0; +} + +static void tda10071_release(struct dvb_frontend *fe) +{ + struct tda10071_priv *priv = fe->demodulator_priv; + kfree(priv); +} + +struct dvb_frontend *tda10071_attach(const struct tda10071_config *config, + struct i2c_adapter *i2c) +{ + int ret; + struct tda10071_priv *priv = NULL; + u8 tmp; + + /* allocate memory for the internal priv */ + priv = kzalloc(sizeof(struct tda10071_priv), GFP_KERNEL); + if (priv == NULL) { + ret = -ENOMEM; + goto error; + } + + /* make sure demod i2c address is specified */ + if (!config->demod_i2c_addr) { + dev_dbg(&i2c->dev, "%s: invalid demod i2c address!\n", __func__); + ret = -EINVAL; + goto error; + } + + /* make sure tuner i2c address is specified */ + if (!config->tuner_i2c_addr) { + dev_dbg(&i2c->dev, "%s: invalid tuner i2c address!\n", __func__); + ret = -EINVAL; + goto error; + } + + /* setup the priv */ + priv->i2c = i2c; + memcpy(&priv->cfg, config, sizeof(struct tda10071_config)); + + /* chip ID */ + ret = tda10071_rd_reg(priv, 0xff, &tmp); + if (ret || tmp != 0x0f) + goto error; + + /* chip type */ + ret = tda10071_rd_reg(priv, 0xdd, &tmp); + if (ret || tmp != 0x00) + goto error; + + /* chip version */ + ret = tda10071_rd_reg(priv, 0xfe, &tmp); + if (ret || tmp != 0x01) + goto error; + + /* create dvb_frontend */ + memcpy(&priv->fe.ops, &tda10071_ops, sizeof(struct dvb_frontend_ops)); + priv->fe.demodulator_priv = priv; + + return &priv->fe; +error: + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(tda10071_attach); + +static struct dvb_frontend_ops tda10071_ops = { + .delsys = { SYS_DVBS, SYS_DVBS2 }, + .info = { + .name = "NXP TDA10071", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_8_9 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_RECOVER | + FE_CAN_2G_MODULATION + }, + + .release = tda10071_release, + + .get_tune_settings = tda10071_get_tune_settings, + + .init = tda10071_init, + .sleep = tda10071_sleep, + + .set_frontend = tda10071_set_frontend, + .get_frontend = tda10071_get_frontend, + + .read_status = tda10071_read_status, + .read_snr = tda10071_read_snr, + .read_signal_strength = tda10071_read_signal_strength, + .read_ber = tda10071_read_ber, + .read_ucblocks = tda10071_read_ucblocks, + + .diseqc_send_master_cmd = tda10071_diseqc_send_master_cmd, + .diseqc_recv_slave_reply = tda10071_diseqc_recv_slave_reply, + .diseqc_send_burst = tda10071_diseqc_send_burst, + + .set_tone = tda10071_set_tone, + .set_voltage = tda10071_set_voltage, +}; + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("NXP TDA10071 DVB-S/S2 demodulator driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(TDA10071_FIRMWARE); diff --git a/drivers/media/dvb-frontends/tda10071.h b/drivers/media/dvb-frontends/tda10071.h new file mode 100644 index 00000000..f9542f68 --- /dev/null +++ b/drivers/media/dvb-frontends/tda10071.h @@ -0,0 +1,87 @@ +/* + * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver + * + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef TDA10071_H +#define TDA10071_H + +#include +#include + +struct tda10071_config { + /* Demodulator I2C address. + * Default: none, must set + * Values: 0x55, + */ + u8 demod_i2c_addr; + + /* Tuner I2C address. + * Default: none, must set + * Values: 0x14, 0x54, ... + */ + u8 tuner_i2c_addr; + + /* Max bytes I2C provider can write at once. + * Note: Buffer is taken from the stack currently! + * Default: none, must set + * Values: + */ + u16 i2c_wr_max; + + /* TS output mode. + * Default: TDA10071_TS_SERIAL + * Values: + */ +#define TDA10071_TS_SERIAL 0 +#define TDA10071_TS_PARALLEL 1 + u8 ts_mode; + + /* Input spectrum inversion. + * Default: 0 + * Values: 0, 1 + */ + bool spec_inv; + + /* Xtal frequency Hz + * Default: none, must set + * Values: + */ + u32 xtal; + + /* PLL multiplier. + * Default: none, must set + * Values: + */ + u8 pll_multiplier; +}; + + +#if IS_ENABLED(CONFIG_DVB_TDA10071) +extern struct dvb_frontend *tda10071_attach( + const struct tda10071_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *tda10071_attach( + const struct tda10071_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* TDA10071_H */ diff --git a/drivers/media/dvb-frontends/tda10071_priv.h b/drivers/media/dvb-frontends/tda10071_priv.h new file mode 100644 index 00000000..4baf14bf --- /dev/null +++ b/drivers/media/dvb-frontends/tda10071_priv.h @@ -0,0 +1,109 @@ +/* + * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver + * + * Copyright (C) 2011 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef TDA10071_PRIV +#define TDA10071_PRIV + +#include "dvb_frontend.h" +#include "tda10071.h" +#include + +struct tda10071_priv { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct tda10071_config cfg; + + u8 meas_count[2]; + u32 ber; + u32 ucb; + fe_status_t fe_status; + fe_delivery_system_t delivery_system; + bool warm; /* FW running */ +}; + +static struct tda10071_modcod { + fe_delivery_system_t delivery_system; + fe_modulation_t modulation; + fe_code_rate_t fec; + u8 val; +} TDA10071_MODCOD[] = { + /* NBC-QPSK */ + { SYS_DVBS2, QPSK, FEC_AUTO, 0x00 }, + { SYS_DVBS2, QPSK, FEC_1_2, 0x04 }, + { SYS_DVBS2, QPSK, FEC_3_5, 0x05 }, + { SYS_DVBS2, QPSK, FEC_2_3, 0x06 }, + { SYS_DVBS2, QPSK, FEC_3_4, 0x07 }, + { SYS_DVBS2, QPSK, FEC_4_5, 0x08 }, + { SYS_DVBS2, QPSK, FEC_5_6, 0x09 }, + { SYS_DVBS2, QPSK, FEC_8_9, 0x0a }, + { SYS_DVBS2, QPSK, FEC_9_10, 0x0b }, + /* 8PSK */ + { SYS_DVBS2, PSK_8, FEC_3_5, 0x0c }, + { SYS_DVBS2, PSK_8, FEC_2_3, 0x0d }, + { SYS_DVBS2, PSK_8, FEC_3_4, 0x0e }, + { SYS_DVBS2, PSK_8, FEC_5_6, 0x0f }, + { SYS_DVBS2, PSK_8, FEC_8_9, 0x10 }, + { SYS_DVBS2, PSK_8, FEC_9_10, 0x11 }, + /* QPSK */ + { SYS_DVBS, QPSK, FEC_AUTO, 0x2d }, + { SYS_DVBS, QPSK, FEC_1_2, 0x2e }, + { SYS_DVBS, QPSK, FEC_2_3, 0x2f }, + { SYS_DVBS, QPSK, FEC_3_4, 0x30 }, + { SYS_DVBS, QPSK, FEC_5_6, 0x31 }, + { SYS_DVBS, QPSK, FEC_7_8, 0x32 }, +}; + +struct tda10071_reg_val_mask { + u8 reg; + u8 val; + u8 mask; +}; + +/* firmware filename */ +#define TDA10071_FIRMWARE "dvb-fe-tda10071.fw" + +/* firmware commands */ +#define CMD_DEMOD_INIT 0x10 +#define CMD_CHANGE_CHANNEL 0x11 +#define CMD_MPEG_CONFIG 0x13 +#define CMD_TUNER_INIT 0x15 +#define CMD_GET_AGCACC 0x1a + +#define CMD_LNB_CONFIG 0x20 +#define CMD_LNB_SEND_DISEQC 0x21 +#define CMD_LNB_SET_DC_LEVEL 0x22 +#define CMD_LNB_PCB_CONFIG 0x23 +#define CMD_LNB_SEND_TONEBURST 0x24 +#define CMD_LNB_UPDATE_REPLY 0x25 + +#define CMD_GET_FW_VERSION 0x35 +#define CMD_SET_SLEEP_MODE 0x36 +#define CMD_BER_CONTROL 0x3e +#define CMD_BER_UPDATE_COUNTERS 0x3f + +/* firmare command struct */ +#define TDA10071_ARGLEN 30 +struct tda10071_cmd { + u8 args[TDA10071_ARGLEN]; + u8 len; +}; + + +#endif /* TDA10071_PRIV */ diff --git a/drivers/media/dvb-frontends/tda10086.c b/drivers/media/dvb-frontends/tda10086.c new file mode 100644 index 00000000..fcfe2e08 --- /dev/null +++ b/drivers/media/dvb-frontends/tda10086.c @@ -0,0 +1,777 @@ + /* + Driver for Philips tda10086 DVBS Demodulator + + (c) 2006 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "tda10086.h" + +#define SACLK 96000000 + +struct tda10086_state { + struct i2c_adapter* i2c; + const struct tda10086_config* config; + struct dvb_frontend frontend; + + /* private demod data */ + u32 frequency; + u32 symbol_rate; + bool has_lock; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "tda10086: " args); \ + } while (0) + +static int tda10086_write_byte(struct tda10086_state *state, int reg, int data) +{ + int ret; + u8 b0[] = { reg, data }; + struct i2c_msg msg = { .flags = 0, .buf = b0, .len = 2 }; + + msg.addr = state->config->demod_address; + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n", + __func__, reg, data, ret); + + return (ret != 1) ? ret : 0; +} + +static int tda10086_read_byte(struct tda10086_state *state, int reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 }, + { .flags = I2C_M_RD, .buf = b1, .len = 1 }}; + + msg[0].addr = state->config->demod_address; + msg[1].addr = state->config->demod_address; + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, + ret); + return ret; + } + + return b1[0]; +} + +static int tda10086_write_mask(struct tda10086_state *state, int reg, int mask, int data) +{ + int val; + + /* read a byte and check */ + val = tda10086_read_byte(state, reg); + if (val < 0) + return val; + + /* mask if off */ + val = val & ~mask; + val |= data & 0xff; + + /* write it out again */ + return tda10086_write_byte(state, reg, val); +} + +static int tda10086_init(struct dvb_frontend* fe) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 t22k_off = 0x80; + + dprintk ("%s\n", __func__); + + if (state->config->diseqc_tone) + t22k_off = 0; + /* reset */ + tda10086_write_byte(state, 0x00, 0x00); + msleep(10); + + /* misc setup */ + tda10086_write_byte(state, 0x01, 0x94); + tda10086_write_byte(state, 0x02, 0x35); /* NOTE: TT drivers appear to disable CSWP */ + tda10086_write_byte(state, 0x03, 0xe4); + tda10086_write_byte(state, 0x04, 0x43); + tda10086_write_byte(state, 0x0c, 0x0c); + tda10086_write_byte(state, 0x1b, 0xb0); /* noise threshold */ + tda10086_write_byte(state, 0x20, 0x89); /* misc */ + tda10086_write_byte(state, 0x30, 0x04); /* acquisition period length */ + tda10086_write_byte(state, 0x32, 0x00); /* irq off */ + tda10086_write_byte(state, 0x31, 0x56); /* setup AFC */ + + /* setup PLL (this assumes SACLK = 96MHz) */ + tda10086_write_byte(state, 0x55, 0x2c); /* misc PLL setup */ + if (state->config->xtal_freq == TDA10086_XTAL_16M) { + tda10086_write_byte(state, 0x3a, 0x0b); /* M=12 */ + tda10086_write_byte(state, 0x3b, 0x01); /* P=2 */ + } else { + tda10086_write_byte(state, 0x3a, 0x17); /* M=24 */ + tda10086_write_byte(state, 0x3b, 0x00); /* P=1 */ + } + tda10086_write_mask(state, 0x55, 0x20, 0x00); /* powerup PLL */ + + /* setup TS interface */ + tda10086_write_byte(state, 0x11, 0x81); + tda10086_write_byte(state, 0x12, 0x81); + tda10086_write_byte(state, 0x19, 0x40); /* parallel mode A + MSBFIRST */ + tda10086_write_byte(state, 0x56, 0x80); /* powerdown WPLL - unused in the mode we use */ + tda10086_write_byte(state, 0x57, 0x08); /* bypass WPLL - unused in the mode we use */ + tda10086_write_byte(state, 0x10, 0x2a); + + /* setup ADC */ + tda10086_write_byte(state, 0x58, 0x61); /* ADC setup */ + tda10086_write_mask(state, 0x58, 0x01, 0x00); /* powerup ADC */ + + /* setup AGC */ + tda10086_write_byte(state, 0x05, 0x0B); + tda10086_write_byte(state, 0x37, 0x63); + tda10086_write_byte(state, 0x3f, 0x0a); /* NOTE: flydvb varies it */ + tda10086_write_byte(state, 0x40, 0x64); + tda10086_write_byte(state, 0x41, 0x4f); + tda10086_write_byte(state, 0x42, 0x43); + + /* setup viterbi */ + tda10086_write_byte(state, 0x1a, 0x11); /* VBER 10^6, DVB, QPSK */ + + /* setup carrier recovery */ + tda10086_write_byte(state, 0x3d, 0x80); + + /* setup SEC */ + tda10086_write_byte(state, 0x36, t22k_off); /* all SEC off, 22k tone */ + tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); + tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); + + return 0; +} + +static void tda10086_diseqc_wait(struct tda10086_state *state) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(200); + while (!(tda10086_read_byte(state, 0x50) & 0x01)) { + if(time_after(jiffies, timeout)) { + printk("%s: diseqc queue not ready, command may be lost.\n", __func__); + break; + } + msleep(10); + } +} + +static int tda10086_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 t22k_off = 0x80; + + dprintk ("%s\n", __func__); + + if (state->config->diseqc_tone) + t22k_off = 0; + + switch (tone) { + case SEC_TONE_OFF: + tda10086_write_byte(state, 0x36, t22k_off); + break; + + case SEC_TONE_ON: + tda10086_write_byte(state, 0x36, 0x01 + t22k_off); + break; + } + + return 0; +} + +static int tda10086_send_master_cmd (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd* cmd) +{ + struct tda10086_state* state = fe->demodulator_priv; + int i; + u8 oldval; + u8 t22k_off = 0x80; + + dprintk ("%s\n", __func__); + + if (state->config->diseqc_tone) + t22k_off = 0; + + if (cmd->msg_len > 6) + return -EINVAL; + oldval = tda10086_read_byte(state, 0x36); + + for(i=0; i< cmd->msg_len; i++) { + tda10086_write_byte(state, 0x48+i, cmd->msg[i]); + } + tda10086_write_byte(state, 0x36, (0x08 + t22k_off) + | ((cmd->msg_len - 1) << 4)); + + tda10086_diseqc_wait(state); + + tda10086_write_byte(state, 0x36, oldval); + + return 0; +} + +static int tda10086_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 oldval = tda10086_read_byte(state, 0x36); + u8 t22k_off = 0x80; + + dprintk ("%s\n", __func__); + + if (state->config->diseqc_tone) + t22k_off = 0; + + switch(minicmd) { + case SEC_MINI_A: + tda10086_write_byte(state, 0x36, 0x04 + t22k_off); + break; + + case SEC_MINI_B: + tda10086_write_byte(state, 0x36, 0x06 + t22k_off); + break; + } + + tda10086_diseqc_wait(state); + + tda10086_write_byte(state, 0x36, oldval); + + return 0; +} + +static int tda10086_set_inversion(struct tda10086_state *state, + struct dtv_frontend_properties *fe_params) +{ + u8 invval = 0x80; + + dprintk ("%s %i %i\n", __func__, fe_params->inversion, state->config->invert); + + switch(fe_params->inversion) { + case INVERSION_OFF: + if (state->config->invert) + invval = 0x40; + break; + case INVERSION_ON: + if (!state->config->invert) + invval = 0x40; + break; + case INVERSION_AUTO: + invval = 0x00; + break; + } + tda10086_write_mask(state, 0x0c, 0xc0, invval); + + return 0; +} + +static int tda10086_set_symbol_rate(struct tda10086_state *state, + struct dtv_frontend_properties *fe_params) +{ + u8 dfn = 0; + u8 afs = 0; + u8 byp = 0; + u8 reg37 = 0x43; + u8 reg42 = 0x43; + u64 big; + u32 tmp; + u32 bdr; + u32 bdri; + u32 symbol_rate = fe_params->symbol_rate; + + dprintk ("%s %i\n", __func__, symbol_rate); + + /* setup the decimation and anti-aliasing filters.. */ + if (symbol_rate < (u32) (SACLK * 0.0137)) { + dfn=4; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.0208)) { + dfn=4; + afs=0; + } else if (symbol_rate < (u32) (SACLK * 0.0270)) { + dfn=3; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.0416)) { + dfn=3; + afs=0; + } else if (symbol_rate < (u32) (SACLK * 0.0550)) { + dfn=2; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.0833)) { + dfn=2; + afs=0; + } else if (symbol_rate < (u32) (SACLK * 0.1100)) { + dfn=1; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.1666)) { + dfn=1; + afs=0; + } else if (symbol_rate < (u32) (SACLK * 0.2200)) { + dfn=0; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.3333)) { + dfn=0; + afs=0; + } else { + reg37 = 0x63; + reg42 = 0x4f; + byp=1; + } + + /* calculate BDR */ + big = (1ULL<<21) * ((u64) symbol_rate/1000ULL) * (1ULL<> 8); + tda10086_write_byte(state, 0x08, bdr >> 16); + tda10086_write_byte(state, 0x09, bdri); + tda10086_write_byte(state, 0x37, reg37); + tda10086_write_byte(state, 0x42, reg42); + + return 0; +} + +static int tda10086_set_fec(struct tda10086_state *state, + struct dtv_frontend_properties *fe_params) +{ + u8 fecval; + + dprintk("%s %i\n", __func__, fe_params->fec_inner); + + switch (fe_params->fec_inner) { + case FEC_1_2: + fecval = 0x00; + break; + case FEC_2_3: + fecval = 0x01; + break; + case FEC_3_4: + fecval = 0x02; + break; + case FEC_4_5: + fecval = 0x03; + break; + case FEC_5_6: + fecval = 0x04; + break; + case FEC_6_7: + fecval = 0x05; + break; + case FEC_7_8: + fecval = 0x06; + break; + case FEC_8_9: + fecval = 0x07; + break; + case FEC_AUTO: + fecval = 0x08; + break; + default: + return -1; + } + tda10086_write_byte(state, 0x0d, fecval); + + return 0; +} + +static int tda10086_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache; + struct tda10086_state *state = fe->demodulator_priv; + int ret; + u32 freq = 0; + int freqoff; + + dprintk ("%s\n", __func__); + + /* modify parameters for tuning */ + tda10086_write_byte(state, 0x02, 0x35); + state->has_lock = false; + + /* set params */ + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (fe->ops.tuner_ops.get_frequency) + fe->ops.tuner_ops.get_frequency(fe, &freq); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* calcluate the frequency offset (in *Hz* not kHz) */ + freqoff = fe_params->frequency - freq; + freqoff = ((1<<16) * freqoff) / (SACLK/1000); + tda10086_write_byte(state, 0x3d, 0x80 | ((freqoff >> 8) & 0x7f)); + tda10086_write_byte(state, 0x3e, freqoff); + + if ((ret = tda10086_set_inversion(state, fe_params)) < 0) + return ret; + if ((ret = tda10086_set_symbol_rate(state, fe_params)) < 0) + return ret; + if ((ret = tda10086_set_fec(state, fe_params)) < 0) + return ret; + + /* soft reset + disable TS output until lock */ + tda10086_write_mask(state, 0x10, 0x40, 0x40); + tda10086_write_mask(state, 0x00, 0x01, 0x00); + + state->symbol_rate = fe_params->symbol_rate; + state->frequency = fe_params->frequency; + return 0; +} + +static int tda10086_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache; + struct tda10086_state* state = fe->demodulator_priv; + u8 val; + int tmp; + u64 tmp64; + + dprintk ("%s\n", __func__); + + /* check for invalid symbol rate */ + if (fe_params->symbol_rate < 500000) + return -EINVAL; + + /* calculate the updated frequency (note: we convert from Hz->kHz) */ + tmp64 = tda10086_read_byte(state, 0x52); + tmp64 |= (tda10086_read_byte(state, 0x51) << 8); + if (tmp64 & 0x8000) + tmp64 |= 0xffffffffffff0000ULL; + tmp64 = (tmp64 * (SACLK/1000ULL)); + do_div(tmp64, (1ULL<<15) * (1ULL<<1)); + fe_params->frequency = (int) state->frequency + (int) tmp64; + + /* the inversion */ + val = tda10086_read_byte(state, 0x0c); + if (val & 0x80) { + switch(val & 0x40) { + case 0x00: + fe_params->inversion = INVERSION_OFF; + if (state->config->invert) + fe_params->inversion = INVERSION_ON; + break; + default: + fe_params->inversion = INVERSION_ON; + if (state->config->invert) + fe_params->inversion = INVERSION_OFF; + break; + } + } else { + tda10086_read_byte(state, 0x0f); + switch(val & 0x02) { + case 0x00: + fe_params->inversion = INVERSION_OFF; + if (state->config->invert) + fe_params->inversion = INVERSION_ON; + break; + default: + fe_params->inversion = INVERSION_ON; + if (state->config->invert) + fe_params->inversion = INVERSION_OFF; + break; + } + } + + /* calculate the updated symbol rate */ + tmp = tda10086_read_byte(state, 0x1d); + if (tmp & 0x80) + tmp |= 0xffffff00; + tmp = (tmp * 480 * (1<<1)) / 128; + tmp = ((state->symbol_rate/1000) * tmp) / (1000000/1000); + fe_params->symbol_rate = state->symbol_rate + tmp; + + /* the FEC */ + val = (tda10086_read_byte(state, 0x0d) & 0x70) >> 4; + switch(val) { + case 0x00: + fe_params->fec_inner = FEC_1_2; + break; + case 0x01: + fe_params->fec_inner = FEC_2_3; + break; + case 0x02: + fe_params->fec_inner = FEC_3_4; + break; + case 0x03: + fe_params->fec_inner = FEC_4_5; + break; + case 0x04: + fe_params->fec_inner = FEC_5_6; + break; + case 0x05: + fe_params->fec_inner = FEC_6_7; + break; + case 0x06: + fe_params->fec_inner = FEC_7_8; + break; + case 0x07: + fe_params->fec_inner = FEC_8_9; + break; + } + + return 0; +} + +static int tda10086_read_status(struct dvb_frontend* fe, fe_status_t *fe_status) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 val; + + dprintk ("%s\n", __func__); + + val = tda10086_read_byte(state, 0x0e); + *fe_status = 0; + if (val & 0x01) + *fe_status |= FE_HAS_SIGNAL; + if (val & 0x02) + *fe_status |= FE_HAS_CARRIER; + if (val & 0x04) + *fe_status |= FE_HAS_VITERBI; + if (val & 0x08) + *fe_status |= FE_HAS_SYNC; + if (val & 0x10) { + *fe_status |= FE_HAS_LOCK; + if (!state->has_lock) { + state->has_lock = true; + /* modify parameters for stable reception */ + tda10086_write_byte(state, 0x02, 0x00); + } + } + + return 0; +} + +static int tda10086_read_signal_strength(struct dvb_frontend* fe, u16 * signal) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 _str; + + dprintk ("%s\n", __func__); + + _str = 0xff - tda10086_read_byte(state, 0x43); + *signal = (_str << 8) | _str; + + return 0; +} + +static int tda10086_read_snr(struct dvb_frontend* fe, u16 * snr) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 _snr; + + dprintk ("%s\n", __func__); + + _snr = 0xff - tda10086_read_byte(state, 0x1c); + *snr = (_snr << 8) | _snr; + + return 0; +} + +static int tda10086_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __func__); + + /* read it */ + *ucblocks = tda10086_read_byte(state, 0x18) & 0x7f; + + /* reset counter */ + tda10086_write_byte(state, 0x18, 0x00); + tda10086_write_byte(state, 0x18, 0x80); + + return 0; +} + +static int tda10086_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __func__); + + /* read it */ + *ber = 0; + *ber |= tda10086_read_byte(state, 0x15); + *ber |= tda10086_read_byte(state, 0x16) << 8; + *ber |= (tda10086_read_byte(state, 0x17) & 0xf) << 16; + + return 0; +} + +static int tda10086_sleep(struct dvb_frontend* fe) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __func__); + + tda10086_write_mask(state, 0x00, 0x08, 0x08); + + return 0; +} + +static int tda10086_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __func__); + + if (enable) { + tda10086_write_mask(state, 0x00, 0x10, 0x10); + } else { + tda10086_write_mask(state, 0x00, 0x10, 0x00); + } + + return 0; +} + +static int tda10086_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + + if (p->symbol_rate > 20000000) { + fesettings->min_delay_ms = 50; + fesettings->step_size = 2000; + fesettings->max_drift = 8000; + } else if (p->symbol_rate > 12000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 1500; + fesettings->max_drift = 9000; + } else if (p->symbol_rate > 8000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 1000; + fesettings->max_drift = 8000; + } else if (p->symbol_rate > 4000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 500; + fesettings->max_drift = 7000; + } else if (p->symbol_rate > 2000000) { + fesettings->min_delay_ms = 200; + fesettings->step_size = p->symbol_rate / 8000; + fesettings->max_drift = 14 * fesettings->step_size; + } else { + fesettings->min_delay_ms = 200; + fesettings->step_size = p->symbol_rate / 8000; + fesettings->max_drift = 18 * fesettings->step_size; + } + + return 0; +} + +static void tda10086_release(struct dvb_frontend* fe) +{ + struct tda10086_state *state = fe->demodulator_priv; + tda10086_sleep(fe); + kfree(state); +} + +static struct dvb_frontend_ops tda10086_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Philips TDA10086 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK + }, + + .release = tda10086_release, + + .init = tda10086_init, + .sleep = tda10086_sleep, + .i2c_gate_ctrl = tda10086_i2c_gate_ctrl, + + .set_frontend = tda10086_set_frontend, + .get_frontend = tda10086_get_frontend, + .get_tune_settings = tda10086_get_tune_settings, + + .read_status = tda10086_read_status, + .read_ber = tda10086_read_ber, + .read_signal_strength = tda10086_read_signal_strength, + .read_snr = tda10086_read_snr, + .read_ucblocks = tda10086_read_ucblocks, + + .diseqc_send_master_cmd = tda10086_send_master_cmd, + .diseqc_send_burst = tda10086_send_burst, + .set_tone = tda10086_set_tone, +}; + +struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, + struct i2c_adapter* i2c) +{ + struct tda10086_state *state; + + dprintk ("%s\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct tda10086_state), GFP_KERNEL); + if (!state) + return NULL; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* check if the demod is there */ + if (tda10086_read_byte(state, 0x1e) != 0xe1) { + kfree(state); + return NULL; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda10086_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Philips TDA10086 DVB-S Demodulator"); +MODULE_AUTHOR("Andrew de Quincey"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(tda10086_attach); diff --git a/drivers/media/dvb-frontends/tda10086.h b/drivers/media/dvb-frontends/tda10086.h new file mode 100644 index 00000000..458fe91c --- /dev/null +++ b/drivers/media/dvb-frontends/tda10086.h @@ -0,0 +1,61 @@ + /* + Driver for Philips tda10086 DVBS Frontend + + (c) 2006 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#ifndef TDA10086_H +#define TDA10086_H + +#include +#include + +enum tda10086_xtal { + TDA10086_XTAL_16M, + TDA10086_XTAL_4M +}; + +struct tda10086_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* does the "inversion" need inverted? */ + u8 invert; + + /* do we need the diseqc signal with carrier? */ + u8 diseqc_tone; + + /* frequency of the reference xtal */ + enum tda10086_xtal xtal_freq; +}; + +#if IS_ENABLED(CONFIG_DVB_TDA10086) +extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_TDA10086 */ + +#endif /* TDA10086_H */ diff --git a/drivers/media/dvb-frontends/tda18271c2dd.c b/drivers/media/dvb-frontends/tda18271c2dd.c new file mode 100644 index 00000000..2c54586a --- /dev/null +++ b/drivers/media/dvb-frontends/tda18271c2dd.c @@ -0,0 +1,1257 @@ +/* + * tda18271c2dd: Driver for the TDA18271C2 tuner + * + * Copyright (C) 2010 Digital Devices GmbH + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "tda18271c2dd.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +struct SStandardParam { + s32 m_IFFrequency; + u32 m_BandWidth; + u8 m_EP3_4_0; + u8 m_EB22; +}; + +struct SMap { + u32 m_Frequency; + u8 m_Param; +}; + +struct SMapI { + u32 m_Frequency; + s32 m_Param; +}; + +struct SMap2 { + u32 m_Frequency; + u8 m_Param1; + u8 m_Param2; +}; + +struct SRFBandMap { + u32 m_RF_max; + u32 m_RF1_Default; + u32 m_RF2_Default; + u32 m_RF3_Default; +}; + +enum ERegister { + ID = 0, + TM, + PL, + EP1, EP2, EP3, EP4, EP5, + CPD, CD1, CD2, CD3, + MPD, MD1, MD2, MD3, + EB1, EB2, EB3, EB4, EB5, EB6, EB7, EB8, EB9, EB10, + EB11, EB12, EB13, EB14, EB15, EB16, EB17, EB18, EB19, EB20, + EB21, EB22, EB23, + NUM_REGS +}; + +struct tda_state { + struct i2c_adapter *i2c; + u8 adr; + + u32 m_Frequency; + u32 IF; + + u8 m_IFLevelAnalog; + u8 m_IFLevelDigital; + u8 m_IFLevelDVBC; + u8 m_IFLevelDVBT; + + u8 m_EP4; + u8 m_EP3_Standby; + + bool m_bMaster; + + s32 m_SettlingTime; + + u8 m_Regs[NUM_REGS]; + + /* Tracking filter settings for band 0..6 */ + u32 m_RF1[7]; + s32 m_RF_A1[7]; + s32 m_RF_B1[7]; + u32 m_RF2[7]; + s32 m_RF_A2[7]; + s32 m_RF_B2[7]; + u32 m_RF3[7]; + + u8 m_TMValue_RFCal; /* Calibration temperatur */ + + bool m_bFMInput; /* true to use Pin 8 for FM Radio */ + +}; + +static int PowerScan(struct tda_state *state, + u8 RFBand, u32 RF_in, + u32 *pRF_Out, bool *pbcal); + +static int i2c_readn(struct i2c_adapter *adapter, u8 adr, u8 *data, int len) +{ + struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD, + .buf = data, .len = len} }; + return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1; +} + +static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len) +{ + struct i2c_msg msg = {.addr = adr, .flags = 0, + .buf = data, .len = len}; + + if (i2c_transfer(adap, &msg, 1) != 1) { + printk(KERN_ERR "tda18271c2dd: i2c write error at addr %i\n", adr); + return -1; + } + return 0; +} + +static int WriteRegs(struct tda_state *state, + u8 SubAddr, u8 *Regs, u16 nRegs) +{ + u8 data[MAX_XFER_SIZE]; + + if (1 + nRegs > sizeof(data)) { + printk(KERN_WARNING + "%s: i2c wr: len=%d is too big!\n", + KBUILD_MODNAME, nRegs); + return -EINVAL; + } + + data[0] = SubAddr; + memcpy(data + 1, Regs, nRegs); + return i2c_write(state->i2c, state->adr, data, nRegs + 1); +} + +static int WriteReg(struct tda_state *state, u8 SubAddr, u8 Reg) +{ + u8 msg[2] = {SubAddr, Reg}; + + return i2c_write(state->i2c, state->adr, msg, 2); +} + +static int Read(struct tda_state *state, u8 * Regs) +{ + return i2c_readn(state->i2c, state->adr, Regs, 16); +} + +static int ReadExtented(struct tda_state *state, u8 * Regs) +{ + return i2c_readn(state->i2c, state->adr, Regs, NUM_REGS); +} + +static int UpdateRegs(struct tda_state *state, u8 RegFrom, u8 RegTo) +{ + return WriteRegs(state, RegFrom, + &state->m_Regs[RegFrom], RegTo-RegFrom+1); +} +static int UpdateReg(struct tda_state *state, u8 Reg) +{ + return WriteReg(state, Reg, state->m_Regs[Reg]); +} + +#include "tda18271c2dd_maps.h" + +static void reset(struct tda_state *state) +{ + u32 ulIFLevelAnalog = 0; + u32 ulIFLevelDigital = 2; + u32 ulIFLevelDVBC = 7; + u32 ulIFLevelDVBT = 6; + u32 ulXTOut = 0; + u32 ulStandbyMode = 0x06; /* Send in stdb, but leave osc on */ + u32 ulSlave = 0; + u32 ulFMInput = 0; + u32 ulSettlingTime = 100; + + state->m_Frequency = 0; + state->m_SettlingTime = 100; + state->m_IFLevelAnalog = (ulIFLevelAnalog & 0x07) << 2; + state->m_IFLevelDigital = (ulIFLevelDigital & 0x07) << 2; + state->m_IFLevelDVBC = (ulIFLevelDVBC & 0x07) << 2; + state->m_IFLevelDVBT = (ulIFLevelDVBT & 0x07) << 2; + + state->m_EP4 = 0x20; + if (ulXTOut != 0) + state->m_EP4 |= 0x40; + + state->m_EP3_Standby = ((ulStandbyMode & 0x07) << 5) | 0x0F; + state->m_bMaster = (ulSlave == 0); + + state->m_SettlingTime = ulSettlingTime; + + state->m_bFMInput = (ulFMInput == 2); +} + +static bool SearchMap1(struct SMap Map[], + u32 Frequency, u8 *pParam) +{ + int i = 0; + + while ((Map[i].m_Frequency != 0) && (Frequency > Map[i].m_Frequency)) + i += 1; + if (Map[i].m_Frequency == 0) + return false; + *pParam = Map[i].m_Param; + return true; +} + +static bool SearchMap2(struct SMapI Map[], + u32 Frequency, s32 *pParam) +{ + int i = 0; + + while ((Map[i].m_Frequency != 0) && + (Frequency > Map[i].m_Frequency)) + i += 1; + if (Map[i].m_Frequency == 0) + return false; + *pParam = Map[i].m_Param; + return true; +} + +static bool SearchMap3(struct SMap2 Map[], u32 Frequency, + u8 *pParam1, u8 *pParam2) +{ + int i = 0; + + while ((Map[i].m_Frequency != 0) && + (Frequency > Map[i].m_Frequency)) + i += 1; + if (Map[i].m_Frequency == 0) + return false; + *pParam1 = Map[i].m_Param1; + *pParam2 = Map[i].m_Param2; + return true; +} + +static bool SearchMap4(struct SRFBandMap Map[], + u32 Frequency, u8 *pRFBand) +{ + int i = 0; + + while (i < 7 && (Frequency > Map[i].m_RF_max)) + i += 1; + if (i == 7) + return false; + *pRFBand = i; + return true; +} + +static int ThermometerRead(struct tda_state *state, u8 *pTM_Value) +{ + int status = 0; + + do { + u8 Regs[16]; + state->m_Regs[TM] |= 0x10; + status = UpdateReg(state, TM); + if (status < 0) + break; + status = Read(state, Regs); + if (status < 0) + break; + if (((Regs[TM] & 0x0F) == 0 && (Regs[TM] & 0x20) == 0x20) || + ((Regs[TM] & 0x0F) == 8 && (Regs[TM] & 0x20) == 0x00)) { + state->m_Regs[TM] ^= 0x20; + status = UpdateReg(state, TM); + if (status < 0) + break; + msleep(10); + status = Read(state, Regs); + if (status < 0) + break; + } + *pTM_Value = (Regs[TM] & 0x20) + ? m_Thermometer_Map_2[Regs[TM] & 0x0F] + : m_Thermometer_Map_1[Regs[TM] & 0x0F] ; + state->m_Regs[TM] &= ~0x10; /* Thermometer off */ + status = UpdateReg(state, TM); + if (status < 0) + break; + state->m_Regs[EP4] &= ~0x03; /* CAL_mode = 0 ????????? */ + status = UpdateReg(state, EP4); + if (status < 0) + break; + } while (0); + + return status; +} + +static int StandBy(struct tda_state *state) +{ + int status = 0; + do { + state->m_Regs[EB12] &= ~0x20; /* PD_AGC1_Det = 0 */ + status = UpdateReg(state, EB12); + if (status < 0) + break; + state->m_Regs[EB18] &= ~0x83; /* AGC1_loop_off = 0, AGC1_Gain = 6 dB */ + status = UpdateReg(state, EB18); + if (status < 0) + break; + state->m_Regs[EB21] |= 0x03; /* AGC2_Gain = -6 dB */ + state->m_Regs[EP3] = state->m_EP3_Standby; + status = UpdateReg(state, EP3); + if (status < 0) + break; + state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LP_Fc[2] = 0 */ + status = UpdateRegs(state, EB21, EB23); + if (status < 0) + break; + } while (0); + return status; +} + +static int CalcMainPLL(struct tda_state *state, u32 freq) +{ + + u8 PostDiv; + u8 Div; + u64 OscFreq; + u32 MainDiv; + + if (!SearchMap3(m_Main_PLL_Map, freq, &PostDiv, &Div)) + return -EINVAL; + + OscFreq = (u64) freq * (u64) Div; + OscFreq *= (u64) 16384; + do_div(OscFreq, (u64)16000000); + MainDiv = OscFreq; + + state->m_Regs[MPD] = PostDiv & 0x77; + state->m_Regs[MD1] = ((MainDiv >> 16) & 0x7F); + state->m_Regs[MD2] = ((MainDiv >> 8) & 0xFF); + state->m_Regs[MD3] = (MainDiv & 0xFF); + + return UpdateRegs(state, MPD, MD3); +} + +static int CalcCalPLL(struct tda_state *state, u32 freq) +{ + u8 PostDiv; + u8 Div; + u64 OscFreq; + u32 CalDiv; + + if (!SearchMap3(m_Cal_PLL_Map, freq, &PostDiv, &Div)) + return -EINVAL; + + OscFreq = (u64)freq * (u64)Div; + /* CalDiv = u32( OscFreq * 16384 / 16000000 ); */ + OscFreq *= (u64)16384; + do_div(OscFreq, (u64)16000000); + CalDiv = OscFreq; + + state->m_Regs[CPD] = PostDiv; + state->m_Regs[CD1] = ((CalDiv >> 16) & 0xFF); + state->m_Regs[CD2] = ((CalDiv >> 8) & 0xFF); + state->m_Regs[CD3] = (CalDiv & 0xFF); + + return UpdateRegs(state, CPD, CD3); +} + +static int CalibrateRF(struct tda_state *state, + u8 RFBand, u32 freq, s32 *pCprog) +{ + int status = 0; + u8 Regs[NUM_REGS]; + do { + u8 BP_Filter = 0; + u8 GainTaper = 0; + u8 RFC_K = 0; + u8 RFC_M = 0; + + state->m_Regs[EP4] &= ~0x03; /* CAL_mode = 0 */ + status = UpdateReg(state, EP4); + if (status < 0) + break; + state->m_Regs[EB18] |= 0x03; /* AGC1_Gain = 3 */ + status = UpdateReg(state, EB18); + if (status < 0) + break; + + /* Switching off LT (as datasheet says) causes calibration on C1 to fail */ + /* (Readout of Cprog is allways 255) */ + if (state->m_Regs[ID] != 0x83) /* C1: ID == 83, C2: ID == 84 */ + state->m_Regs[EP3] |= 0x40; /* SM_LT = 1 */ + + if (!(SearchMap1(m_BP_Filter_Map, freq, &BP_Filter) && + SearchMap1(m_GainTaper_Map, freq, &GainTaper) && + SearchMap3(m_KM_Map, freq, &RFC_K, &RFC_M))) + return -EINVAL; + + state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | BP_Filter; + state->m_Regs[EP2] = (RFBand << 5) | GainTaper; + + state->m_Regs[EB13] = (state->m_Regs[EB13] & ~0x7C) | (RFC_K << 4) | (RFC_M << 2); + + status = UpdateRegs(state, EP1, EP3); + if (status < 0) + break; + status = UpdateReg(state, EB13); + if (status < 0) + break; + + state->m_Regs[EB4] |= 0x20; /* LO_ForceSrce = 1 */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + + state->m_Regs[EB7] |= 0x20; /* CAL_ForceSrce = 1 */ + status = UpdateReg(state, EB7); + if (status < 0) + break; + + state->m_Regs[EB14] = 0; /* RFC_Cprog = 0 */ + status = UpdateReg(state, EB14); + if (status < 0) + break; + + state->m_Regs[EB20] &= ~0x20; /* ForceLock = 0; */ + status = UpdateReg(state, EB20); + if (status < 0) + break; + + state->m_Regs[EP4] |= 0x03; /* CAL_Mode = 3 */ + status = UpdateRegs(state, EP4, EP5); + if (status < 0) + break; + + status = CalcCalPLL(state, freq); + if (status < 0) + break; + status = CalcMainPLL(state, freq + 1000000); + if (status < 0) + break; + + msleep(5); + status = UpdateReg(state, EP2); + if (status < 0) + break; + status = UpdateReg(state, EP1); + if (status < 0) + break; + status = UpdateReg(state, EP2); + if (status < 0) + break; + status = UpdateReg(state, EP1); + if (status < 0) + break; + + state->m_Regs[EB4] &= ~0x20; /* LO_ForceSrce = 0 */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + + state->m_Regs[EB7] &= ~0x20; /* CAL_ForceSrce = 0 */ + status = UpdateReg(state, EB7); + if (status < 0) + break; + msleep(10); + + state->m_Regs[EB20] |= 0x20; /* ForceLock = 1; */ + status = UpdateReg(state, EB20); + if (status < 0) + break; + msleep(60); + + state->m_Regs[EP4] &= ~0x03; /* CAL_Mode = 0 */ + state->m_Regs[EP3] &= ~0x40; /* SM_LT = 0 */ + state->m_Regs[EB18] &= ~0x03; /* AGC1_Gain = 0 */ + status = UpdateReg(state, EB18); + if (status < 0) + break; + status = UpdateRegs(state, EP3, EP4); + if (status < 0) + break; + status = UpdateReg(state, EP1); + if (status < 0) + break; + + status = ReadExtented(state, Regs); + if (status < 0) + break; + + *pCprog = Regs[EB14]; + + } while (0); + return status; +} + +static int RFTrackingFiltersInit(struct tda_state *state, + u8 RFBand) +{ + int status = 0; + + u32 RF1 = m_RF_Band_Map[RFBand].m_RF1_Default; + u32 RF2 = m_RF_Band_Map[RFBand].m_RF2_Default; + u32 RF3 = m_RF_Band_Map[RFBand].m_RF3_Default; + bool bcal = false; + + s32 Cprog_cal1 = 0; + s32 Cprog_table1 = 0; + s32 Cprog_cal2 = 0; + s32 Cprog_table2 = 0; + s32 Cprog_cal3 = 0; + s32 Cprog_table3 = 0; + + state->m_RF_A1[RFBand] = 0; + state->m_RF_B1[RFBand] = 0; + state->m_RF_A2[RFBand] = 0; + state->m_RF_B2[RFBand] = 0; + + do { + status = PowerScan(state, RFBand, RF1, &RF1, &bcal); + if (status < 0) + break; + if (bcal) { + status = CalibrateRF(state, RFBand, RF1, &Cprog_cal1); + if (status < 0) + break; + } + SearchMap2(m_RF_Cal_Map, RF1, &Cprog_table1); + if (!bcal) + Cprog_cal1 = Cprog_table1; + state->m_RF_B1[RFBand] = Cprog_cal1 - Cprog_table1; + /* state->m_RF_A1[RF_Band] = ???? */ + + if (RF2 == 0) + break; + + status = PowerScan(state, RFBand, RF2, &RF2, &bcal); + if (status < 0) + break; + if (bcal) { + status = CalibrateRF(state, RFBand, RF2, &Cprog_cal2); + if (status < 0) + break; + } + SearchMap2(m_RF_Cal_Map, RF2, &Cprog_table2); + if (!bcal) + Cprog_cal2 = Cprog_table2; + + state->m_RF_A1[RFBand] = + (Cprog_cal2 - Cprog_table2 - Cprog_cal1 + Cprog_table1) / + ((s32)(RF2) - (s32)(RF1)); + + if (RF3 == 0) + break; + + status = PowerScan(state, RFBand, RF3, &RF3, &bcal); + if (status < 0) + break; + if (bcal) { + status = CalibrateRF(state, RFBand, RF3, &Cprog_cal3); + if (status < 0) + break; + } + SearchMap2(m_RF_Cal_Map, RF3, &Cprog_table3); + if (!bcal) + Cprog_cal3 = Cprog_table3; + state->m_RF_A2[RFBand] = (Cprog_cal3 - Cprog_table3 - Cprog_cal2 + Cprog_table2) / ((s32)(RF3) - (s32)(RF2)); + state->m_RF_B2[RFBand] = Cprog_cal2 - Cprog_table2; + + } while (0); + + state->m_RF1[RFBand] = RF1; + state->m_RF2[RFBand] = RF2; + state->m_RF3[RFBand] = RF3; + +#if 0 + printk(KERN_ERR "tda18271c2dd: %s %d RF1 = %d A1 = %d B1 = %d RF2 = %d A2 = %d B2 = %d RF3 = %d\n", __func__, + RFBand, RF1, state->m_RF_A1[RFBand], state->m_RF_B1[RFBand], RF2, + state->m_RF_A2[RFBand], state->m_RF_B2[RFBand], RF3); +#endif + + return status; +} + +static int PowerScan(struct tda_state *state, + u8 RFBand, u32 RF_in, u32 *pRF_Out, bool *pbcal) +{ + int status = 0; + do { + u8 Gain_Taper = 0; + s32 RFC_Cprog = 0; + u8 CID_Target = 0; + u8 CountLimit = 0; + u32 freq_MainPLL; + u8 Regs[NUM_REGS]; + u8 CID_Gain; + s32 Count = 0; + int sign = 1; + bool wait = false; + + if (!(SearchMap2(m_RF_Cal_Map, RF_in, &RFC_Cprog) && + SearchMap1(m_GainTaper_Map, RF_in, &Gain_Taper) && + SearchMap3(m_CID_Target_Map, RF_in, &CID_Target, &CountLimit))) { + + printk(KERN_ERR "tda18271c2dd: %s Search map failed\n", __func__); + return -EINVAL; + } + + state->m_Regs[EP2] = (RFBand << 5) | Gain_Taper; + state->m_Regs[EB14] = (RFC_Cprog); + status = UpdateReg(state, EP2); + if (status < 0) + break; + status = UpdateReg(state, EB14); + if (status < 0) + break; + + freq_MainPLL = RF_in + 1000000; + status = CalcMainPLL(state, freq_MainPLL); + if (status < 0) + break; + msleep(5); + state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x03) | 1; /* CAL_mode = 1 */ + status = UpdateReg(state, EP4); + if (status < 0) + break; + status = UpdateReg(state, EP2); /* Launch power measurement */ + if (status < 0) + break; + status = ReadExtented(state, Regs); + if (status < 0) + break; + CID_Gain = Regs[EB10] & 0x3F; + state->m_Regs[ID] = Regs[ID]; /* Chip version, (needed for C1 workarround in CalibrateRF) */ + + *pRF_Out = RF_in; + + while (CID_Gain < CID_Target) { + freq_MainPLL = RF_in + sign * Count + 1000000; + status = CalcMainPLL(state, freq_MainPLL); + if (status < 0) + break; + msleep(wait ? 5 : 1); + wait = false; + status = UpdateReg(state, EP2); /* Launch power measurement */ + if (status < 0) + break; + status = ReadExtented(state, Regs); + if (status < 0) + break; + CID_Gain = Regs[EB10] & 0x3F; + Count += 200000; + + if (Count < CountLimit * 100000) + continue; + if (sign < 0) + break; + + sign = -sign; + Count = 200000; + wait = true; + } + status = status; + if (status < 0) + break; + if (CID_Gain >= CID_Target) { + *pbcal = true; + *pRF_Out = freq_MainPLL - 1000000; + } else + *pbcal = false; + } while (0); + + return status; +} + +static int PowerScanInit(struct tda_state *state) +{ + int status = 0; + do { + state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | 0x12; + state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x1F); /* If level = 0, Cal mode = 0 */ + status = UpdateRegs(state, EP3, EP4); + if (status < 0) + break; + state->m_Regs[EB18] = (state->m_Regs[EB18] & ~0x03); /* AGC 1 Gain = 0 */ + status = UpdateReg(state, EB18); + if (status < 0) + break; + state->m_Regs[EB21] = (state->m_Regs[EB21] & ~0x03); /* AGC 2 Gain = 0 (Datasheet = 3) */ + state->m_Regs[EB23] = (state->m_Regs[EB23] | 0x06); /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */ + status = UpdateRegs(state, EB21, EB23); + if (status < 0) + break; + } while (0); + return status; +} + +static int CalcRFFilterCurve(struct tda_state *state) +{ + int status = 0; + do { + msleep(200); /* Temperature stabilisation */ + status = PowerScanInit(state); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 0); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 1); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 2); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 3); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 4); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 5); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 6); + if (status < 0) + break; + status = ThermometerRead(state, &state->m_TMValue_RFCal); /* also switches off Cal mode !!! */ + if (status < 0) + break; + } while (0); + + return status; +} + +static int FixedContentsI2CUpdate(struct tda_state *state) +{ + static u8 InitRegs[] = { + 0x08, 0x80, 0xC6, + 0xDF, 0x16, 0x60, 0x80, + 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0xFC, 0x01, 0x84, 0x41, + 0x01, 0x84, 0x40, 0x07, + 0x00, 0x00, 0x96, 0x3F, + 0xC1, 0x00, 0x8F, 0x00, + 0x00, 0x8C, 0x00, 0x20, + 0xB3, 0x48, 0xB0, + }; + int status = 0; + memcpy(&state->m_Regs[TM], InitRegs, EB23 - TM + 1); + do { + status = UpdateRegs(state, TM, EB23); + if (status < 0) + break; + + /* AGC1 gain setup */ + state->m_Regs[EB17] = 0x00; + status = UpdateReg(state, EB17); + if (status < 0) + break; + state->m_Regs[EB17] = 0x03; + status = UpdateReg(state, EB17); + if (status < 0) + break; + state->m_Regs[EB17] = 0x43; + status = UpdateReg(state, EB17); + if (status < 0) + break; + state->m_Regs[EB17] = 0x4C; + status = UpdateReg(state, EB17); + if (status < 0) + break; + + /* IRC Cal Low band */ + state->m_Regs[EP3] = 0x1F; + state->m_Regs[EP4] = 0x66; + state->m_Regs[EP5] = 0x81; + state->m_Regs[CPD] = 0xCC; + state->m_Regs[CD1] = 0x6C; + state->m_Regs[CD2] = 0x00; + state->m_Regs[CD3] = 0x00; + state->m_Regs[MPD] = 0xC5; + state->m_Regs[MD1] = 0x77; + state->m_Regs[MD2] = 0x08; + state->m_Regs[MD3] = 0x00; + status = UpdateRegs(state, EP2, MD3); /* diff between sw and datasheet (ep3-md3) */ + if (status < 0) + break; + +#if 0 + state->m_Regs[EB4] = 0x61; /* missing in sw */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + msleep(1); + state->m_Regs[EB4] = 0x41; + status = UpdateReg(state, EB4); + if (status < 0) + break; +#endif + + msleep(5); + status = UpdateReg(state, EP1); + if (status < 0) + break; + msleep(5); + + state->m_Regs[EP5] = 0x85; + state->m_Regs[CPD] = 0xCB; + state->m_Regs[CD1] = 0x66; + state->m_Regs[CD2] = 0x70; + status = UpdateRegs(state, EP3, CD3); + if (status < 0) + break; + msleep(5); + status = UpdateReg(state, EP2); + if (status < 0) + break; + msleep(30); + + /* IRC Cal mid band */ + state->m_Regs[EP5] = 0x82; + state->m_Regs[CPD] = 0xA8; + state->m_Regs[CD2] = 0x00; + state->m_Regs[MPD] = 0xA1; /* Datasheet = 0xA9 */ + state->m_Regs[MD1] = 0x73; + state->m_Regs[MD2] = 0x1A; + status = UpdateRegs(state, EP3, MD3); + if (status < 0) + break; + + msleep(5); + status = UpdateReg(state, EP1); + if (status < 0) + break; + msleep(5); + + state->m_Regs[EP5] = 0x86; + state->m_Regs[CPD] = 0xA8; + state->m_Regs[CD1] = 0x66; + state->m_Regs[CD2] = 0xA0; + status = UpdateRegs(state, EP3, CD3); + if (status < 0) + break; + msleep(5); + status = UpdateReg(state, EP2); + if (status < 0) + break; + msleep(30); + + /* IRC Cal high band */ + state->m_Regs[EP5] = 0x83; + state->m_Regs[CPD] = 0x98; + state->m_Regs[CD1] = 0x65; + state->m_Regs[CD2] = 0x00; + state->m_Regs[MPD] = 0x91; /* Datasheet = 0x91 */ + state->m_Regs[MD1] = 0x71; + state->m_Regs[MD2] = 0xCD; + status = UpdateRegs(state, EP3, MD3); + if (status < 0) + break; + msleep(5); + status = UpdateReg(state, EP1); + if (status < 0) + break; + msleep(5); + state->m_Regs[EP5] = 0x87; + state->m_Regs[CD1] = 0x65; + state->m_Regs[CD2] = 0x50; + status = UpdateRegs(state, EP3, CD3); + if (status < 0) + break; + msleep(5); + status = UpdateReg(state, EP2); + if (status < 0) + break; + msleep(30); + + /* Back to normal */ + state->m_Regs[EP4] = 0x64; + status = UpdateReg(state, EP4); + if (status < 0) + break; + status = UpdateReg(state, EP1); + if (status < 0) + break; + + } while (0); + return status; +} + +static int InitCal(struct tda_state *state) +{ + int status = 0; + + do { + status = FixedContentsI2CUpdate(state); + if (status < 0) + break; + status = CalcRFFilterCurve(state); + if (status < 0) + break; + status = StandBy(state); + if (status < 0) + break; + /* m_bInitDone = true; */ + } while (0); + return status; +}; + +static int RFTrackingFiltersCorrection(struct tda_state *state, + u32 Frequency) +{ + int status = 0; + s32 Cprog_table; + u8 RFBand; + u8 dCoverdT; + + if (!SearchMap2(m_RF_Cal_Map, Frequency, &Cprog_table) || + !SearchMap4(m_RF_Band_Map, Frequency, &RFBand) || + !SearchMap1(m_RF_Cal_DC_Over_DT_Map, Frequency, &dCoverdT)) + + return -EINVAL; + + do { + u8 TMValue_Current; + u32 RF1 = state->m_RF1[RFBand]; + u32 RF2 = state->m_RF1[RFBand]; + u32 RF3 = state->m_RF1[RFBand]; + s32 RF_A1 = state->m_RF_A1[RFBand]; + s32 RF_B1 = state->m_RF_B1[RFBand]; + s32 RF_A2 = state->m_RF_A2[RFBand]; + s32 RF_B2 = state->m_RF_B2[RFBand]; + s32 Capprox = 0; + int TComp; + + state->m_Regs[EP3] &= ~0xE0; /* Power up */ + status = UpdateReg(state, EP3); + if (status < 0) + break; + + status = ThermometerRead(state, &TMValue_Current); + if (status < 0) + break; + + if (RF3 == 0 || Frequency < RF2) + Capprox = RF_A1 * ((s32)(Frequency) - (s32)(RF1)) + RF_B1 + Cprog_table; + else + Capprox = RF_A2 * ((s32)(Frequency) - (s32)(RF2)) + RF_B2 + Cprog_table; + + TComp = (int)(dCoverdT) * ((int)(TMValue_Current) - (int)(state->m_TMValue_RFCal))/1000; + + Capprox += TComp; + + if (Capprox < 0) + Capprox = 0; + else if (Capprox > 255) + Capprox = 255; + + + /* TODO Temperature compensation. There is defenitely a scale factor */ + /* missing in the datasheet, so leave it out for now. */ + state->m_Regs[EB14] = Capprox; + + status = UpdateReg(state, EB14); + if (status < 0) + break; + + } while (0); + return status; +} + +static int ChannelConfiguration(struct tda_state *state, + u32 Frequency, int Standard) +{ + + s32 IntermediateFrequency = m_StandardTable[Standard].m_IFFrequency; + int status = 0; + + u8 BP_Filter = 0; + u8 RF_Band = 0; + u8 GainTaper = 0; + u8 IR_Meas = 0; + + state->IF = IntermediateFrequency; + /* printk("tda18271c2dd: %s Freq = %d Standard = %d IF = %d\n", __func__, Frequency, Standard, IntermediateFrequency); */ + /* get values from tables */ + + if (!(SearchMap1(m_BP_Filter_Map, Frequency, &BP_Filter) && + SearchMap1(m_GainTaper_Map, Frequency, &GainTaper) && + SearchMap1(m_IR_Meas_Map, Frequency, &IR_Meas) && + SearchMap4(m_RF_Band_Map, Frequency, &RF_Band))) { + + printk(KERN_ERR "tda18271c2dd: %s SearchMap failed\n", __func__); + return -EINVAL; + } + + do { + state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | m_StandardTable[Standard].m_EP3_4_0; + state->m_Regs[EP3] &= ~0x04; /* switch RFAGC to high speed mode */ + + /* m_EP4 default for XToutOn, CAL_Mode (0) */ + state->m_Regs[EP4] = state->m_EP4 | ((Standard > HF_AnalogMax) ? state->m_IFLevelDigital : state->m_IFLevelAnalog); + /* state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital; */ + if (Standard <= HF_AnalogMax) + state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelAnalog; + else if (Standard <= HF_ATSC) + state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBT; + else if (Standard <= HF_DVBC) + state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBC; + else + state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital; + + if ((Standard == HF_FM_Radio) && state->m_bFMInput) + state->m_Regs[EP4] |= 80; + + state->m_Regs[MPD] &= ~0x80; + if (Standard > HF_AnalogMax) + state->m_Regs[MPD] |= 0x80; /* Add IF_notch for digital */ + + state->m_Regs[EB22] = m_StandardTable[Standard].m_EB22; + + /* Note: This is missing from flowchart in TDA18271 specification ( 1.5 MHz cutoff for FM ) */ + if (Standard == HF_FM_Radio) + state->m_Regs[EB23] |= 0x06; /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */ + else + state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LPFc[2] = 0 */ + + status = UpdateRegs(state, EB22, EB23); + if (status < 0) + break; + + state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | 0x40 | BP_Filter; /* Dis_Power_level = 1, Filter */ + state->m_Regs[EP5] = (state->m_Regs[EP5] & ~0x07) | IR_Meas; + state->m_Regs[EP2] = (RF_Band << 5) | GainTaper; + + state->m_Regs[EB1] = (state->m_Regs[EB1] & ~0x07) | + (state->m_bMaster ? 0x04 : 0x00); /* CALVCO_FortLOn = MS */ + /* AGC1_always_master = 0 */ + /* AGC_firstn = 0 */ + status = UpdateReg(state, EB1); + if (status < 0) + break; + + if (state->m_bMaster) { + status = CalcMainPLL(state, Frequency + IntermediateFrequency); + if (status < 0) + break; + status = UpdateRegs(state, TM, EP5); + if (status < 0) + break; + state->m_Regs[EB4] |= 0x20; /* LO_forceSrce = 1 */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + msleep(1); + state->m_Regs[EB4] &= ~0x20; /* LO_forceSrce = 0 */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + } else { + u8 PostDiv = 0; + u8 Div; + status = CalcCalPLL(state, Frequency + IntermediateFrequency); + if (status < 0) + break; + + SearchMap3(m_Cal_PLL_Map, Frequency + IntermediateFrequency, &PostDiv, &Div); + state->m_Regs[MPD] = (state->m_Regs[MPD] & ~0x7F) | (PostDiv & 0x77); + status = UpdateReg(state, MPD); + if (status < 0) + break; + status = UpdateRegs(state, TM, EP5); + if (status < 0) + break; + + state->m_Regs[EB7] |= 0x20; /* CAL_forceSrce = 1 */ + status = UpdateReg(state, EB7); + if (status < 0) + break; + msleep(1); + state->m_Regs[EB7] &= ~0x20; /* CAL_forceSrce = 0 */ + status = UpdateReg(state, EB7); + if (status < 0) + break; + } + msleep(20); + if (Standard != HF_FM_Radio) + state->m_Regs[EP3] |= 0x04; /* RFAGC to normal mode */ + status = UpdateReg(state, EP3); + if (status < 0) + break; + + } while (0); + return status; +} + +static int sleep(struct dvb_frontend *fe) +{ + struct tda_state *state = fe->tuner_priv; + + StandBy(state); + return 0; +} + +static int init(struct dvb_frontend *fe) +{ + return 0; +} + +static int release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + + +static int set_params(struct dvb_frontend *fe) +{ + struct tda_state *state = fe->tuner_priv; + int status = 0; + int Standard; + u32 bw = fe->dtv_property_cache.bandwidth_hz; + u32 delsys = fe->dtv_property_cache.delivery_system; + + state->m_Frequency = fe->dtv_property_cache.frequency; + + switch (delsys) { + case SYS_DVBT: + case SYS_DVBT2: + switch (bw) { + case 6000000: + Standard = HF_DVBT_6MHZ; + break; + case 7000000: + Standard = HF_DVBT_7MHZ; + break; + case 8000000: + Standard = HF_DVBT_8MHZ; + break; + default: + return -EINVAL; + } + case SYS_DVBC_ANNEX_A: + case SYS_DVBC_ANNEX_C: + if (bw <= 6000000) + Standard = HF_DVBC_6MHZ; + else if (bw <= 7000000) + Standard = HF_DVBC_7MHZ; + else + Standard = HF_DVBC_8MHZ; + break; + default: + return -EINVAL; + } + do { + status = RFTrackingFiltersCorrection(state, state->m_Frequency); + if (status < 0) + break; + status = ChannelConfiguration(state, state->m_Frequency, + Standard); + if (status < 0) + break; + + msleep(state->m_SettlingTime); /* Allow AGC's to settle down */ + } while (0); + return status; +} + +#if 0 +static int GetSignalStrength(s32 *pSignalStrength, u32 RFAgc, u32 IFAgc) +{ + if (IFAgc < 500) { + /* Scale this from 0 to 50000 */ + *pSignalStrength = IFAgc * 100; + } else { + /* Scale range 500-1500 to 50000-80000 */ + *pSignalStrength = 50000 + (IFAgc - 500) * 30; + } + + return 0; +} +#endif + +static int get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct tda_state *state = fe->tuner_priv; + + *frequency = state->IF; + return 0; +} + +static int get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + /* struct tda_state *state = fe->tuner_priv; */ + /* *bandwidth = priv->bandwidth; */ + return 0; +} + + +static struct dvb_tuner_ops tuner_ops = { + .info = { + .name = "NXP TDA18271C2D", + .frequency_min = 47125000, + .frequency_max = 865000000, + .frequency_step = 62500 + }, + .init = init, + .sleep = sleep, + .set_params = set_params, + .release = release, + .get_if_frequency = get_if_frequency, + .get_bandwidth = get_bandwidth, +}; + +struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 adr) +{ + struct tda_state *state; + + state = kzalloc(sizeof(struct tda_state), GFP_KERNEL); + if (!state) + return NULL; + + fe->tuner_priv = state; + state->adr = adr; + state->i2c = i2c; + memcpy(&fe->ops.tuner_ops, &tuner_ops, sizeof(struct dvb_tuner_ops)); + reset(state); + InitCal(state); + + return fe; +} +EXPORT_SYMBOL_GPL(tda18271c2dd_attach); + +MODULE_DESCRIPTION("TDA18271C2 driver"); +MODULE_AUTHOR("DD"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/tda18271c2dd.h b/drivers/media/dvb-frontends/tda18271c2dd.h new file mode 100644 index 00000000..dd84f7b6 --- /dev/null +++ b/drivers/media/dvb-frontends/tda18271c2dd.h @@ -0,0 +1,18 @@ +#ifndef _TDA18271C2DD_H_ +#define _TDA18271C2DD_H_ + +#include + +#if IS_ENABLED(CONFIG_DVB_TDA18271C2DD) +struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 adr); +#else +static inline struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 adr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb-frontends/tda18271c2dd_maps.h b/drivers/media/dvb-frontends/tda18271c2dd_maps.h new file mode 100644 index 00000000..b87661b9 --- /dev/null +++ b/drivers/media/dvb-frontends/tda18271c2dd_maps.h @@ -0,0 +1,814 @@ +enum HF_S { + HF_None = 0, HF_B, HF_DK, HF_G, HF_I, HF_L, HF_L1, HF_MN, HF_FM_Radio, + HF_AnalogMax, HF_DVBT_6MHZ, HF_DVBT_7MHZ, HF_DVBT_8MHZ, + HF_DVBT, HF_ATSC, HF_DVBC_6MHZ, HF_DVBC_7MHZ, + HF_DVBC_8MHZ, HF_DVBC +}; + +struct SStandardParam m_StandardTable[] = { + { 0, 0, 0x00, 0x00 }, /* HF_None */ + { 6000000, 7000000, 0x1D, 0x2C }, /* HF_B, */ + { 6900000, 8000000, 0x1E, 0x2C }, /* HF_DK, */ + { 7100000, 8000000, 0x1E, 0x2C }, /* HF_G, */ + { 7250000, 8000000, 0x1E, 0x2C }, /* HF_I, */ + { 6900000, 8000000, 0x1E, 0x2C }, /* HF_L, */ + { 1250000, 8000000, 0x1E, 0x2C }, /* HF_L1, */ + { 5400000, 6000000, 0x1C, 0x2C }, /* HF_MN, */ + { 1250000, 500000, 0x18, 0x2C }, /* HF_FM_Radio, */ + { 0, 0, 0x00, 0x00 }, /* HF_AnalogMax (Unused) */ + { 3300000, 6000000, 0x1C, 0x58 }, /* HF_DVBT_6MHZ */ + { 3500000, 7000000, 0x1C, 0x37 }, /* HF_DVBT_7MHZ */ + { 4000000, 8000000, 0x1D, 0x37 }, /* HF_DVBT_8MHZ */ + { 0, 0, 0x00, 0x00 }, /* HF_DVBT (Unused) */ + { 5000000, 6000000, 0x1C, 0x37 }, /* HF_ATSC (center = 3.25 MHz) */ + { 4000000, 6000000, 0x1D, 0x58 }, /* HF_DVBC_6MHZ (Chicago) */ + { 4500000, 7000000, 0x1E, 0x37 }, /* HF_DVBC_7MHZ (not documented by NXP) */ + { 5000000, 8000000, 0x1F, 0x37 }, /* HF_DVBC_8MHZ */ + { 0, 0, 0x00, 0x00 }, /* HF_DVBC (Unused) */ +}; + +struct SMap m_BP_Filter_Map[] = { + { 62000000, 0x00 }, + { 84000000, 0x01 }, + { 100000000, 0x02 }, + { 140000000, 0x03 }, + { 170000000, 0x04 }, + { 180000000, 0x05 }, + { 865000000, 0x06 }, + { 0, 0x00 }, /* Table End */ +}; + +static struct SMapI m_RF_Cal_Map[] = { + { 41000000, 0x0F }, + { 43000000, 0x1C }, + { 45000000, 0x2F }, + { 46000000, 0x39 }, + { 47000000, 0x40 }, + { 47900000, 0x50 }, + { 49100000, 0x16 }, + { 50000000, 0x18 }, + { 51000000, 0x20 }, + { 53000000, 0x28 }, + { 55000000, 0x2B }, + { 56000000, 0x32 }, + { 57000000, 0x35 }, + { 58000000, 0x3E }, + { 59000000, 0x43 }, + { 60000000, 0x4E }, + { 61100000, 0x55 }, + { 63000000, 0x0F }, + { 64000000, 0x11 }, + { 65000000, 0x12 }, + { 66000000, 0x15 }, + { 67000000, 0x16 }, + { 68000000, 0x17 }, + { 70000000, 0x19 }, + { 71000000, 0x1C }, + { 72000000, 0x1D }, + { 73000000, 0x1F }, + { 74000000, 0x20 }, + { 75000000, 0x21 }, + { 76000000, 0x24 }, + { 77000000, 0x25 }, + { 78000000, 0x27 }, + { 80000000, 0x28 }, + { 81000000, 0x29 }, + { 82000000, 0x2D }, + { 83000000, 0x2E }, + { 84000000, 0x2F }, + { 85000000, 0x31 }, + { 86000000, 0x33 }, + { 87000000, 0x34 }, + { 88000000, 0x35 }, + { 89000000, 0x37 }, + { 90000000, 0x38 }, + { 91000000, 0x39 }, + { 93000000, 0x3C }, + { 94000000, 0x3E }, + { 95000000, 0x3F }, + { 96000000, 0x40 }, + { 97000000, 0x42 }, + { 99000000, 0x45 }, + { 100000000, 0x46 }, + { 102000000, 0x48 }, + { 103000000, 0x4A }, + { 105000000, 0x4D }, + { 106000000, 0x4E }, + { 107000000, 0x50 }, + { 108000000, 0x51 }, + { 110000000, 0x54 }, + { 111000000, 0x56 }, + { 112000000, 0x57 }, + { 113000000, 0x58 }, + { 114000000, 0x59 }, + { 115000000, 0x5C }, + { 116000000, 0x5D }, + { 117000000, 0x5F }, + { 119000000, 0x60 }, + { 120000000, 0x64 }, + { 121000000, 0x65 }, + { 122000000, 0x66 }, + { 123000000, 0x68 }, + { 124000000, 0x69 }, + { 125000000, 0x6C }, + { 126000000, 0x6D }, + { 127000000, 0x6E }, + { 128000000, 0x70 }, + { 129000000, 0x71 }, + { 130000000, 0x75 }, + { 131000000, 0x77 }, + { 132000000, 0x78 }, + { 133000000, 0x7B }, + { 134000000, 0x7E }, + { 135000000, 0x81 }, + { 136000000, 0x82 }, + { 137000000, 0x87 }, + { 138000000, 0x88 }, + { 139000000, 0x8D }, + { 140000000, 0x8E }, + { 141000000, 0x91 }, + { 142000000, 0x95 }, + { 143000000, 0x9A }, + { 144000000, 0x9D }, + { 145000000, 0xA1 }, + { 146000000, 0xA2 }, + { 147000000, 0xA4 }, + { 148000000, 0xA9 }, + { 149000000, 0xAE }, + { 150000000, 0xB0 }, + { 151000000, 0xB1 }, + { 152000000, 0xB7 }, + { 152600000, 0xBD }, + { 154000000, 0x20 }, + { 155000000, 0x22 }, + { 156000000, 0x24 }, + { 157000000, 0x25 }, + { 158000000, 0x27 }, + { 159000000, 0x29 }, + { 160000000, 0x2C }, + { 161000000, 0x2D }, + { 163000000, 0x2E }, + { 164000000, 0x2F }, + { 164700000, 0x30 }, + { 166000000, 0x11 }, + { 167000000, 0x12 }, + { 168000000, 0x13 }, + { 169000000, 0x14 }, + { 170000000, 0x15 }, + { 172000000, 0x16 }, + { 173000000, 0x17 }, + { 174000000, 0x18 }, + { 175000000, 0x1A }, + { 176000000, 0x1B }, + { 178000000, 0x1D }, + { 179000000, 0x1E }, + { 180000000, 0x1F }, + { 181000000, 0x20 }, + { 182000000, 0x21 }, + { 183000000, 0x22 }, + { 184000000, 0x24 }, + { 185000000, 0x25 }, + { 186000000, 0x26 }, + { 187000000, 0x27 }, + { 188000000, 0x29 }, + { 189000000, 0x2A }, + { 190000000, 0x2C }, + { 191000000, 0x2D }, + { 192000000, 0x2E }, + { 193000000, 0x2F }, + { 194000000, 0x30 }, + { 195000000, 0x33 }, + { 196000000, 0x35 }, + { 198000000, 0x36 }, + { 200000000, 0x38 }, + { 201000000, 0x3C }, + { 202000000, 0x3D }, + { 203500000, 0x3E }, + { 206000000, 0x0E }, + { 208000000, 0x0F }, + { 212000000, 0x10 }, + { 216000000, 0x11 }, + { 217000000, 0x12 }, + { 218000000, 0x13 }, + { 220000000, 0x14 }, + { 222000000, 0x15 }, + { 225000000, 0x16 }, + { 228000000, 0x17 }, + { 231000000, 0x18 }, + { 234000000, 0x19 }, + { 235000000, 0x1A }, + { 236000000, 0x1B }, + { 237000000, 0x1C }, + { 240000000, 0x1D }, + { 242000000, 0x1E }, + { 244000000, 0x1F }, + { 247000000, 0x20 }, + { 249000000, 0x21 }, + { 252000000, 0x22 }, + { 253000000, 0x23 }, + { 254000000, 0x24 }, + { 256000000, 0x25 }, + { 259000000, 0x26 }, + { 262000000, 0x27 }, + { 264000000, 0x28 }, + { 267000000, 0x29 }, + { 269000000, 0x2A }, + { 271000000, 0x2B }, + { 273000000, 0x2C }, + { 275000000, 0x2D }, + { 277000000, 0x2E }, + { 279000000, 0x2F }, + { 282000000, 0x30 }, + { 284000000, 0x31 }, + { 286000000, 0x32 }, + { 287000000, 0x33 }, + { 290000000, 0x34 }, + { 293000000, 0x35 }, + { 295000000, 0x36 }, + { 297000000, 0x37 }, + { 300000000, 0x38 }, + { 303000000, 0x39 }, + { 305000000, 0x3A }, + { 306000000, 0x3B }, + { 307000000, 0x3C }, + { 310000000, 0x3D }, + { 312000000, 0x3E }, + { 315000000, 0x3F }, + { 318000000, 0x40 }, + { 320000000, 0x41 }, + { 323000000, 0x42 }, + { 324000000, 0x43 }, + { 325000000, 0x44 }, + { 327000000, 0x45 }, + { 331000000, 0x46 }, + { 334000000, 0x47 }, + { 337000000, 0x48 }, + { 339000000, 0x49 }, + { 340000000, 0x4A }, + { 341000000, 0x4B }, + { 343000000, 0x4C }, + { 345000000, 0x4D }, + { 349000000, 0x4E }, + { 352000000, 0x4F }, + { 353000000, 0x50 }, + { 355000000, 0x51 }, + { 357000000, 0x52 }, + { 359000000, 0x53 }, + { 361000000, 0x54 }, + { 362000000, 0x55 }, + { 364000000, 0x56 }, + { 368000000, 0x57 }, + { 370000000, 0x58 }, + { 372000000, 0x59 }, + { 375000000, 0x5A }, + { 376000000, 0x5B }, + { 377000000, 0x5C }, + { 379000000, 0x5D }, + { 382000000, 0x5E }, + { 384000000, 0x5F }, + { 385000000, 0x60 }, + { 386000000, 0x61 }, + { 388000000, 0x62 }, + { 390000000, 0x63 }, + { 393000000, 0x64 }, + { 394000000, 0x65 }, + { 396000000, 0x66 }, + { 397000000, 0x67 }, + { 398000000, 0x68 }, + { 400000000, 0x69 }, + { 402000000, 0x6A }, + { 403000000, 0x6B }, + { 407000000, 0x6C }, + { 408000000, 0x6D }, + { 409000000, 0x6E }, + { 410000000, 0x6F }, + { 411000000, 0x70 }, + { 412000000, 0x71 }, + { 413000000, 0x72 }, + { 414000000, 0x73 }, + { 417000000, 0x74 }, + { 418000000, 0x75 }, + { 420000000, 0x76 }, + { 422000000, 0x77 }, + { 423000000, 0x78 }, + { 424000000, 0x79 }, + { 427000000, 0x7A }, + { 428000000, 0x7B }, + { 429000000, 0x7D }, + { 432000000, 0x7F }, + { 434000000, 0x80 }, + { 435000000, 0x81 }, + { 436000000, 0x83 }, + { 437000000, 0x84 }, + { 438000000, 0x85 }, + { 439000000, 0x86 }, + { 440000000, 0x87 }, + { 441000000, 0x88 }, + { 442000000, 0x89 }, + { 445000000, 0x8A }, + { 446000000, 0x8B }, + { 447000000, 0x8C }, + { 448000000, 0x8E }, + { 449000000, 0x8F }, + { 450000000, 0x90 }, + { 452000000, 0x91 }, + { 453000000, 0x93 }, + { 454000000, 0x94 }, + { 456000000, 0x96 }, + { 457800000, 0x98 }, + { 461000000, 0x11 }, + { 468000000, 0x12 }, + { 472000000, 0x13 }, + { 473000000, 0x14 }, + { 474000000, 0x15 }, + { 481000000, 0x16 }, + { 486000000, 0x17 }, + { 491000000, 0x18 }, + { 498000000, 0x19 }, + { 499000000, 0x1A }, + { 501000000, 0x1B }, + { 506000000, 0x1C }, + { 511000000, 0x1D }, + { 516000000, 0x1E }, + { 520000000, 0x1F }, + { 521000000, 0x20 }, + { 525000000, 0x21 }, + { 529000000, 0x22 }, + { 533000000, 0x23 }, + { 539000000, 0x24 }, + { 541000000, 0x25 }, + { 547000000, 0x26 }, + { 549000000, 0x27 }, + { 551000000, 0x28 }, + { 556000000, 0x29 }, + { 561000000, 0x2A }, + { 563000000, 0x2B }, + { 565000000, 0x2C }, + { 569000000, 0x2D }, + { 571000000, 0x2E }, + { 577000000, 0x2F }, + { 580000000, 0x30 }, + { 582000000, 0x31 }, + { 584000000, 0x32 }, + { 588000000, 0x33 }, + { 591000000, 0x34 }, + { 596000000, 0x35 }, + { 598000000, 0x36 }, + { 603000000, 0x37 }, + { 604000000, 0x38 }, + { 606000000, 0x39 }, + { 612000000, 0x3A }, + { 615000000, 0x3B }, + { 617000000, 0x3C }, + { 621000000, 0x3D }, + { 622000000, 0x3E }, + { 625000000, 0x3F }, + { 632000000, 0x40 }, + { 633000000, 0x41 }, + { 634000000, 0x42 }, + { 642000000, 0x43 }, + { 643000000, 0x44 }, + { 647000000, 0x45 }, + { 650000000, 0x46 }, + { 652000000, 0x47 }, + { 657000000, 0x48 }, + { 661000000, 0x49 }, + { 662000000, 0x4A }, + { 665000000, 0x4B }, + { 667000000, 0x4C }, + { 670000000, 0x4D }, + { 673000000, 0x4E }, + { 676000000, 0x4F }, + { 677000000, 0x50 }, + { 681000000, 0x51 }, + { 683000000, 0x52 }, + { 686000000, 0x53 }, + { 688000000, 0x54 }, + { 689000000, 0x55 }, + { 691000000, 0x56 }, + { 695000000, 0x57 }, + { 698000000, 0x58 }, + { 703000000, 0x59 }, + { 704000000, 0x5A }, + { 705000000, 0x5B }, + { 707000000, 0x5C }, + { 710000000, 0x5D }, + { 712000000, 0x5E }, + { 717000000, 0x5F }, + { 718000000, 0x60 }, + { 721000000, 0x61 }, + { 722000000, 0x62 }, + { 723000000, 0x63 }, + { 725000000, 0x64 }, + { 727000000, 0x65 }, + { 730000000, 0x66 }, + { 732000000, 0x67 }, + { 735000000, 0x68 }, + { 740000000, 0x69 }, + { 741000000, 0x6A }, + { 742000000, 0x6B }, + { 743000000, 0x6C }, + { 745000000, 0x6D }, + { 747000000, 0x6E }, + { 748000000, 0x6F }, + { 750000000, 0x70 }, + { 752000000, 0x71 }, + { 754000000, 0x72 }, + { 757000000, 0x73 }, + { 758000000, 0x74 }, + { 760000000, 0x75 }, + { 763000000, 0x76 }, + { 764000000, 0x77 }, + { 766000000, 0x78 }, + { 767000000, 0x79 }, + { 768000000, 0x7A }, + { 773000000, 0x7B }, + { 774000000, 0x7C }, + { 776000000, 0x7D }, + { 777000000, 0x7E }, + { 778000000, 0x7F }, + { 779000000, 0x80 }, + { 781000000, 0x81 }, + { 783000000, 0x82 }, + { 784000000, 0x83 }, + { 785000000, 0x84 }, + { 786000000, 0x85 }, + { 793000000, 0x86 }, + { 794000000, 0x87 }, + { 795000000, 0x88 }, + { 797000000, 0x89 }, + { 799000000, 0x8A }, + { 801000000, 0x8B }, + { 802000000, 0x8C }, + { 803000000, 0x8D }, + { 804000000, 0x8E }, + { 810000000, 0x90 }, + { 811000000, 0x91 }, + { 812000000, 0x92 }, + { 814000000, 0x93 }, + { 816000000, 0x94 }, + { 817000000, 0x96 }, + { 818000000, 0x97 }, + { 820000000, 0x98 }, + { 821000000, 0x99 }, + { 822000000, 0x9A }, + { 828000000, 0x9B }, + { 829000000, 0x9D }, + { 830000000, 0x9F }, + { 831000000, 0xA0 }, + { 833000000, 0xA1 }, + { 835000000, 0xA2 }, + { 836000000, 0xA3 }, + { 837000000, 0xA4 }, + { 838000000, 0xA6 }, + { 840000000, 0xA8 }, + { 842000000, 0xA9 }, + { 845000000, 0xAA }, + { 846000000, 0xAB }, + { 847000000, 0xAD }, + { 848000000, 0xAE }, + { 852000000, 0xAF }, + { 853000000, 0xB0 }, + { 858000000, 0xB1 }, + { 860000000, 0xB2 }, + { 861000000, 0xB3 }, + { 862000000, 0xB4 }, + { 863000000, 0xB6 }, + { 864000000, 0xB8 }, + { 865000000, 0xB9 }, + { 0, 0x00 }, /* Table End */ +}; + + +static struct SMap2 m_KM_Map[] = { + { 47900000, 3, 2 }, + { 61100000, 3, 1 }, + { 350000000, 3, 0 }, + { 720000000, 2, 1 }, + { 865000000, 3, 3 }, + { 0, 0x00 }, /* Table End */ +}; + +static struct SMap2 m_Main_PLL_Map[] = { + { 33125000, 0x57, 0xF0 }, + { 35500000, 0x56, 0xE0 }, + { 38188000, 0x55, 0xD0 }, + { 41375000, 0x54, 0xC0 }, + { 45125000, 0x53, 0xB0 }, + { 49688000, 0x52, 0xA0 }, + { 55188000, 0x51, 0x90 }, + { 62125000, 0x50, 0x80 }, + { 66250000, 0x47, 0x78 }, + { 71000000, 0x46, 0x70 }, + { 76375000, 0x45, 0x68 }, + { 82750000, 0x44, 0x60 }, + { 90250000, 0x43, 0x58 }, + { 99375000, 0x42, 0x50 }, + { 110375000, 0x41, 0x48 }, + { 124250000, 0x40, 0x40 }, + { 132500000, 0x37, 0x3C }, + { 142000000, 0x36, 0x38 }, + { 152750000, 0x35, 0x34 }, + { 165500000, 0x34, 0x30 }, + { 180500000, 0x33, 0x2C }, + { 198750000, 0x32, 0x28 }, + { 220750000, 0x31, 0x24 }, + { 248500000, 0x30, 0x20 }, + { 265000000, 0x27, 0x1E }, + { 284000000, 0x26, 0x1C }, + { 305500000, 0x25, 0x1A }, + { 331000000, 0x24, 0x18 }, + { 361000000, 0x23, 0x16 }, + { 397500000, 0x22, 0x14 }, + { 441500000, 0x21, 0x12 }, + { 497000000, 0x20, 0x10 }, + { 530000000, 0x17, 0x0F }, + { 568000000, 0x16, 0x0E }, + { 611000000, 0x15, 0x0D }, + { 662000000, 0x14, 0x0C }, + { 722000000, 0x13, 0x0B }, + { 795000000, 0x12, 0x0A }, + { 883000000, 0x11, 0x09 }, + { 994000000, 0x10, 0x08 }, + { 0, 0x00, 0x00 }, /* Table End */ +}; + +static struct SMap2 m_Cal_PLL_Map[] = { + { 33813000, 0xDD, 0xD0 }, + { 36625000, 0xDC, 0xC0 }, + { 39938000, 0xDB, 0xB0 }, + { 43938000, 0xDA, 0xA0 }, + { 48813000, 0xD9, 0x90 }, + { 54938000, 0xD8, 0x80 }, + { 62813000, 0xD3, 0x70 }, + { 67625000, 0xCD, 0x68 }, + { 73250000, 0xCC, 0x60 }, + { 79875000, 0xCB, 0x58 }, + { 87875000, 0xCA, 0x50 }, + { 97625000, 0xC9, 0x48 }, + { 109875000, 0xC8, 0x40 }, + { 125625000, 0xC3, 0x38 }, + { 135250000, 0xBD, 0x34 }, + { 146500000, 0xBC, 0x30 }, + { 159750000, 0xBB, 0x2C }, + { 175750000, 0xBA, 0x28 }, + { 195250000, 0xB9, 0x24 }, + { 219750000, 0xB8, 0x20 }, + { 251250000, 0xB3, 0x1C }, + { 270500000, 0xAD, 0x1A }, + { 293000000, 0xAC, 0x18 }, + { 319500000, 0xAB, 0x16 }, + { 351500000, 0xAA, 0x14 }, + { 390500000, 0xA9, 0x12 }, + { 439500000, 0xA8, 0x10 }, + { 502500000, 0xA3, 0x0E }, + { 541000000, 0x9D, 0x0D }, + { 586000000, 0x9C, 0x0C }, + { 639000000, 0x9B, 0x0B }, + { 703000000, 0x9A, 0x0A }, + { 781000000, 0x99, 0x09 }, + { 879000000, 0x98, 0x08 }, + { 0, 0x00, 0x00 }, /* Table End */ +}; + +static struct SMap m_GainTaper_Map[] = { + { 45400000, 0x1F }, + { 45800000, 0x1E }, + { 46200000, 0x1D }, + { 46700000, 0x1C }, + { 47100000, 0x1B }, + { 47500000, 0x1A }, + { 47900000, 0x19 }, + { 49600000, 0x17 }, + { 51200000, 0x16 }, + { 52900000, 0x15 }, + { 54500000, 0x14 }, + { 56200000, 0x13 }, + { 57800000, 0x12 }, + { 59500000, 0x11 }, + { 61100000, 0x10 }, + { 67600000, 0x0D }, + { 74200000, 0x0C }, + { 80700000, 0x0B }, + { 87200000, 0x0A }, + { 93800000, 0x09 }, + { 100300000, 0x08 }, + { 106900000, 0x07 }, + { 113400000, 0x06 }, + { 119900000, 0x05 }, + { 126500000, 0x04 }, + { 133000000, 0x03 }, + { 139500000, 0x02 }, + { 146100000, 0x01 }, + { 152600000, 0x00 }, + { 154300000, 0x1F }, + { 156100000, 0x1E }, + { 157800000, 0x1D }, + { 159500000, 0x1C }, + { 161200000, 0x1B }, + { 163000000, 0x1A }, + { 164700000, 0x19 }, + { 170200000, 0x17 }, + { 175800000, 0x16 }, + { 181300000, 0x15 }, + { 186900000, 0x14 }, + { 192400000, 0x13 }, + { 198000000, 0x12 }, + { 203500000, 0x11 }, + { 216200000, 0x14 }, + { 228900000, 0x13 }, + { 241600000, 0x12 }, + { 254400000, 0x11 }, + { 267100000, 0x10 }, + { 279800000, 0x0F }, + { 292500000, 0x0E }, + { 305200000, 0x0D }, + { 317900000, 0x0C }, + { 330700000, 0x0B }, + { 343400000, 0x0A }, + { 356100000, 0x09 }, + { 368800000, 0x08 }, + { 381500000, 0x07 }, + { 394200000, 0x06 }, + { 406900000, 0x05 }, + { 419700000, 0x04 }, + { 432400000, 0x03 }, + { 445100000, 0x02 }, + { 457800000, 0x01 }, + { 476300000, 0x19 }, + { 494800000, 0x18 }, + { 513300000, 0x17 }, + { 531800000, 0x16 }, + { 550300000, 0x15 }, + { 568900000, 0x14 }, + { 587400000, 0x13 }, + { 605900000, 0x12 }, + { 624400000, 0x11 }, + { 642900000, 0x10 }, + { 661400000, 0x0F }, + { 679900000, 0x0E }, + { 698400000, 0x0D }, + { 716900000, 0x0C }, + { 735400000, 0x0B }, + { 753900000, 0x0A }, + { 772500000, 0x09 }, + { 791000000, 0x08 }, + { 809500000, 0x07 }, + { 828000000, 0x06 }, + { 846500000, 0x05 }, + { 865000000, 0x04 }, + { 0, 0x00 }, /* Table End */ +}; + +static struct SMap m_RF_Cal_DC_Over_DT_Map[] = { + { 47900000, 0x00 }, + { 55000000, 0x00 }, + { 61100000, 0x0A }, + { 64000000, 0x0A }, + { 82000000, 0x14 }, + { 84000000, 0x19 }, + { 119000000, 0x1C }, + { 124000000, 0x20 }, + { 129000000, 0x2A }, + { 134000000, 0x32 }, + { 139000000, 0x39 }, + { 144000000, 0x3E }, + { 149000000, 0x3F }, + { 152600000, 0x40 }, + { 154000000, 0x40 }, + { 164700000, 0x41 }, + { 203500000, 0x32 }, + { 353000000, 0x19 }, + { 356000000, 0x1A }, + { 359000000, 0x1B }, + { 363000000, 0x1C }, + { 366000000, 0x1D }, + { 369000000, 0x1E }, + { 373000000, 0x1F }, + { 376000000, 0x20 }, + { 379000000, 0x21 }, + { 383000000, 0x22 }, + { 386000000, 0x23 }, + { 389000000, 0x24 }, + { 393000000, 0x25 }, + { 396000000, 0x26 }, + { 399000000, 0x27 }, + { 402000000, 0x28 }, + { 404000000, 0x29 }, + { 407000000, 0x2A }, + { 409000000, 0x2B }, + { 412000000, 0x2C }, + { 414000000, 0x2D }, + { 417000000, 0x2E }, + { 419000000, 0x2F }, + { 422000000, 0x30 }, + { 424000000, 0x31 }, + { 427000000, 0x32 }, + { 429000000, 0x33 }, + { 432000000, 0x34 }, + { 434000000, 0x35 }, + { 437000000, 0x36 }, + { 439000000, 0x37 }, + { 442000000, 0x38 }, + { 444000000, 0x39 }, + { 447000000, 0x3A }, + { 449000000, 0x3B }, + { 457800000, 0x3C }, + { 465000000, 0x0F }, + { 477000000, 0x12 }, + { 483000000, 0x14 }, + { 502000000, 0x19 }, + { 508000000, 0x1B }, + { 519000000, 0x1C }, + { 522000000, 0x1D }, + { 524000000, 0x1E }, + { 534000000, 0x1F }, + { 549000000, 0x20 }, + { 554000000, 0x22 }, + { 584000000, 0x24 }, + { 589000000, 0x26 }, + { 658000000, 0x27 }, + { 664000000, 0x2C }, + { 669000000, 0x2D }, + { 699000000, 0x2E }, + { 704000000, 0x30 }, + { 709000000, 0x31 }, + { 714000000, 0x32 }, + { 724000000, 0x33 }, + { 729000000, 0x36 }, + { 739000000, 0x38 }, + { 744000000, 0x39 }, + { 749000000, 0x3B }, + { 754000000, 0x3C }, + { 759000000, 0x3D }, + { 764000000, 0x3E }, + { 769000000, 0x3F }, + { 774000000, 0x40 }, + { 779000000, 0x41 }, + { 784000000, 0x43 }, + { 789000000, 0x46 }, + { 794000000, 0x48 }, + { 799000000, 0x4B }, + { 804000000, 0x4F }, + { 809000000, 0x54 }, + { 814000000, 0x59 }, + { 819000000, 0x5D }, + { 824000000, 0x61 }, + { 829000000, 0x68 }, + { 834000000, 0x6E }, + { 839000000, 0x75 }, + { 844000000, 0x7E }, + { 849000000, 0x82 }, + { 854000000, 0x84 }, + { 859000000, 0x8F }, + { 865000000, 0x9A }, + { 0, 0x00 }, /* Table End */ +}; + + +static struct SMap m_IR_Meas_Map[] = { + { 200000000, 0x05 }, + { 400000000, 0x06 }, + { 865000000, 0x07 }, + { 0, 0x00 }, /* Table End */ +}; + +static struct SMap2 m_CID_Target_Map[] = { + { 46000000, 0x04, 18 }, + { 52200000, 0x0A, 15 }, + { 70100000, 0x01, 40 }, + { 136800000, 0x18, 40 }, + { 156700000, 0x18, 40 }, + { 186250000, 0x0A, 40 }, + { 230000000, 0x0A, 40 }, + { 345000000, 0x18, 40 }, + { 426000000, 0x0E, 40 }, + { 489500000, 0x1E, 40 }, + { 697500000, 0x32, 40 }, + { 842000000, 0x3A, 40 }, + { 0, 0x00, 0 }, /* Table End */ +}; + +static struct SRFBandMap m_RF_Band_Map[7] = { + { 47900000, 46000000, 0, 0}, + { 61100000, 52200000, 0, 0}, + { 152600000, 70100000, 136800000, 0}, + { 164700000, 156700000, 0, 0}, + { 203500000, 186250000, 0, 0}, + { 457800000, 230000000, 345000000, 426000000}, + { 865000000, 489500000, 697500000, 842000000}, +}; + +u8 m_Thermometer_Map_1[16] = { + 60, 62, 66, 64, + 74, 72, 68, 70, + 90, 88, 84, 86, + 76, 78, 82, 80, +}; + +u8 m_Thermometer_Map_2[16] = { + 92, 94, 98, 96, + 106, 104, 100, 102, + 122, 120, 116, 118, + 108, 110, 114, 112, +}; diff --git a/drivers/media/dvb-frontends/tda665x.c b/drivers/media/dvb-frontends/tda665x.c new file mode 100644 index 00000000..63cc1237 --- /dev/null +++ b/drivers/media/dvb-frontends/tda665x.c @@ -0,0 +1,254 @@ +/* + TDA665x tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "tda665x.h" + +struct tda665x_state { + struct dvb_frontend *fe; + struct i2c_adapter *i2c; + const struct tda665x_config *config; + + u32 frequency; + u32 bandwidth; +}; + +static int tda665x_read(struct tda665x_state *state, u8 *buf) +{ + const struct tda665x_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 }; + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) + goto exit; + + return err; +exit: + printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); + return err; +} + +static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length) +{ + const struct tda665x_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length }; + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) + goto exit; + + return err; +exit: + printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); + return err; +} + +static int tda665x_get_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda665x_state *state = fe->tuner_priv; + int err = 0; + + switch (param) { + case DVBFE_TUNER_FREQUENCY: + tstate->frequency = state->frequency; + break; + case DVBFE_TUNER_BANDWIDTH: + break; + default: + printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param); + err = -EINVAL; + break; + } + + return err; +} + +static int tda665x_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct tda665x_state *state = fe->tuner_priv; + u8 result = 0; + int err = 0; + + *status = 0; + + err = tda665x_read(state, &result); + if (err < 0) + goto exit; + + if ((result >> 6) & 0x01) { + printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__); + *status = 1; + } + + return err; +exit: + printk(KERN_ERR "%s: I/O Error\n", __func__); + return err; +} + +static int tda665x_set_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda665x_state *state = fe->tuner_priv; + const struct tda665x_config *config = state->config; + u32 frequency, status = 0; + u8 buf[4]; + int err = 0; + + if (param & DVBFE_TUNER_FREQUENCY) { + + frequency = tstate->frequency; + if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) { + printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); + return -EINVAL; + } + + frequency += config->frequency_offst; + frequency *= config->ref_multiplier; + frequency += config->ref_divider >> 1; + frequency /= config->ref_divider; + + buf[0] = (u8) ((frequency & 0x7f00) >> 8); + buf[1] = (u8) (frequency & 0x00ff) >> 0; + buf[2] = 0x80 | 0x40 | 0x02; + buf[3] = 0x00; + + /* restore frequency */ + frequency = tstate->frequency; + + if (frequency < 153000000) { + /* VHF-L */ + buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */ + if (frequency < 68000000) + buf[3] |= 0x40; /* 83uA */ + if (frequency < 1040000000) + buf[3] |= 0x60; /* 122uA */ + if (frequency < 1250000000) + buf[3] |= 0x80; /* 163uA */ + else + buf[3] |= 0xa0; /* 254uA */ + } else if (frequency < 438000000) { + /* VHF-H */ + buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */ + if (frequency < 230000000) + buf[3] |= 0x40; + if (frequency < 300000000) + buf[3] |= 0x60; + else + buf[3] |= 0x80; + } else { + /* UHF */ + buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */ + if (frequency < 470000000) + buf[3] |= 0x60; + if (frequency < 526000000) + buf[3] |= 0x80; + else + buf[3] |= 0xa0; + } + + /* Set params */ + err = tda665x_write(state, buf, 5); + if (err < 0) + goto exit; + + /* sleep for some time */ + printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__); + msleep(20); + /* check status */ + err = tda665x_get_status(fe, &status); + if (err < 0) + goto exit; + + if (status == 1) { + printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status); + state->frequency = frequency; /* cache successful state */ + } else { + printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status); + } + } else { + printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param); + return -EINVAL; + } + + return 0; +exit: + printk(KERN_ERR "%s: I/O Error\n", __func__); + return err; +} + +static int tda665x_release(struct dvb_frontend *fe) +{ + struct tda665x_state *state = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(state); + return 0; +} + +static struct dvb_tuner_ops tda665x_ops = { + + .set_state = tda665x_set_state, + .get_state = tda665x_get_state, + .get_status = tda665x_get_status, + .release = tda665x_release +}; + +struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c) +{ + struct tda665x_state *state = NULL; + struct dvb_tuner_info *info; + + state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->i2c = i2c; + state->fe = fe; + fe->tuner_priv = state; + fe->ops.tuner_ops = tda665x_ops; + info = &fe->ops.tuner_ops.info; + + memcpy(info->name, config->name, sizeof(config->name)); + info->frequency_min = config->frequency_min; + info->frequency_max = config->frequency_max; + info->frequency_step = config->frequency_offst; + + printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name); + + return fe; +} +EXPORT_SYMBOL(tda665x_attach); + +MODULE_DESCRIPTION("TDA665x driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/tda665x.h b/drivers/media/dvb-frontends/tda665x.h new file mode 100644 index 00000000..03a0da6d --- /dev/null +++ b/drivers/media/dvb-frontends/tda665x.h @@ -0,0 +1,52 @@ +/* + TDA665x tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __TDA665x_H +#define __TDA665x_H + +struct tda665x_config { + char name[128]; + + u8 addr; + u32 frequency_min; + u32 frequency_max; + u32 frequency_offst; + u32 ref_multiplier; + u32 ref_divider; +}; + +#if IS_ENABLED(CONFIG_DVB_TDA665x) + +extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c); + +#else + +static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_TDA665x */ + +#endif /* __TDA665x_H */ diff --git a/drivers/media/dvb-frontends/tda8083.c b/drivers/media/dvb-frontends/tda8083.c new file mode 100644 index 00000000..9d08350f --- /dev/null +++ b/drivers/media/dvb-frontends/tda8083.c @@ -0,0 +1,487 @@ +/* + Driver for Philips TDA8083 based QPSK Demodulator + + Copyright (C) 2001 Convergence Integrated Media GmbH + + written by Ralph Metzler + + adoption to the new DVB frontend API and diagnostic ioctl's + by Holger Waechtler + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "tda8083.h" + + +struct tda8083_state { + struct i2c_adapter* i2c; + /* configuration settings */ + const struct tda8083_config* config; + struct dvb_frontend frontend; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "tda8083: " args); \ + } while (0) + + +static u8 tda8083_init_tab [] = { + 0x04, 0x00, 0x4a, 0x79, 0x04, 0x00, 0xff, 0xea, + 0x48, 0x42, 0x79, 0x60, 0x70, 0x52, 0x9a, 0x10, + 0x0e, 0x10, 0xf2, 0xa7, 0x93, 0x0b, 0x05, 0xc8, + 0x9d, 0x00, 0x42, 0x80, 0x00, 0x60, 0x40, 0x00, + 0x00, 0x75, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00 +}; + + +static int tda8083_writereg (struct tda8083_state* state, u8 reg, u8 data) +{ + int ret; + u8 buf [] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk ("%s: writereg error (reg %02x, ret == %i)\n", + __func__, reg, ret); + + return (ret != 1) ? -1 : 0; +} + +static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len) +{ + int ret; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = ®1, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = len } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk ("%s: readreg error (reg %02x, ret == %i)\n", + __func__, reg1, ret); + + return ret == 2 ? 0 : -1; +} + +static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg) +{ + u8 val; + + tda8083_readregs (state, reg, &val, 1); + + return val; +} + +static int tda8083_set_inversion (struct tda8083_state* state, fe_spectral_inversion_t inversion) +{ + /* XXX FIXME: implement other modes than FEC_AUTO */ + if (inversion == INVERSION_AUTO) + return 0; + + return -EINVAL; +} + +static int tda8083_set_fec (struct tda8083_state* state, fe_code_rate_t fec) +{ + if (fec == FEC_AUTO) + return tda8083_writereg (state, 0x07, 0xff); + + if (fec >= FEC_1_2 && fec <= FEC_8_9) + return tda8083_writereg (state, 0x07, 1 << (FEC_8_9 - fec)); + + return -EINVAL; +} + +static fe_code_rate_t tda8083_get_fec (struct tda8083_state* state) +{ + u8 index; + static fe_code_rate_t fec_tab [] = { FEC_8_9, FEC_1_2, FEC_2_3, FEC_3_4, + FEC_4_5, FEC_5_6, FEC_6_7, FEC_7_8 }; + + index = tda8083_readreg(state, 0x0e) & 0x07; + + return fec_tab [index]; +} + +static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate) +{ + u32 ratio; + u32 tmp; + u8 filter; + + if (srate > 32000000) + srate = 32000000; + if (srate < 500000) + srate = 500000; + + filter = 0; + if (srate < 24000000) + filter = 2; + if (srate < 16000000) + filter = 3; + + tmp = 31250 << 16; + ratio = tmp / srate; + + tmp = (tmp % srate) << 8; + ratio = (ratio << 8) + tmp / srate; + + tmp = (tmp % srate) << 8; + ratio = (ratio << 8) + tmp / srate; + + dprintk("tda8083: ratio == %08x\n", (unsigned int) ratio); + + tda8083_writereg (state, 0x05, filter); + tda8083_writereg (state, 0x02, (ratio >> 16) & 0xff); + tda8083_writereg (state, 0x03, (ratio >> 8) & 0xff); + tda8083_writereg (state, 0x04, (ratio ) & 0xff); + + tda8083_writereg (state, 0x00, 0x3c); + tda8083_writereg (state, 0x00, 0x04); + + return 1; +} + +static void tda8083_wait_diseqc_fifo (struct tda8083_state* state, int timeout) +{ + unsigned long start = jiffies; + + while (jiffies - start < timeout && + !(tda8083_readreg(state, 0x02) & 0x80)) + { + msleep(50); + } +} + +static int tda8083_set_tone (struct tda8083_state* state, fe_sec_tone_mode_t tone) +{ + tda8083_writereg (state, 0x26, 0xf1); + + switch (tone) { + case SEC_TONE_OFF: + return tda8083_writereg (state, 0x29, 0x00); + case SEC_TONE_ON: + return tda8083_writereg (state, 0x29, 0x80); + default: + return -EINVAL; + }; +} + +static int tda8083_set_voltage (struct tda8083_state* state, fe_sec_voltage_t voltage) +{ + switch (voltage) { + case SEC_VOLTAGE_13: + return tda8083_writereg (state, 0x20, 0x00); + case SEC_VOLTAGE_18: + return tda8083_writereg (state, 0x20, 0x11); + default: + return -EINVAL; + }; +} + +static int tda8083_send_diseqc_burst (struct tda8083_state* state, fe_sec_mini_cmd_t burst) +{ + switch (burst) { + case SEC_MINI_A: + tda8083_writereg (state, 0x29, (5 << 2)); /* send burst A */ + break; + case SEC_MINI_B: + tda8083_writereg (state, 0x29, (7 << 2)); /* send B */ + break; + default: + return -EINVAL; + } + + tda8083_wait_diseqc_fifo (state, 100); + + return 0; +} + +static int tda8083_send_diseqc_msg (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd *m) +{ + struct tda8083_state* state = fe->demodulator_priv; + int i; + + tda8083_writereg (state, 0x29, (m->msg_len - 3) | (1 << 2)); /* enable */ + + for (i=0; imsg_len; i++) + tda8083_writereg (state, 0x23 + i, m->msg[i]); + + tda8083_writereg (state, 0x29, (m->msg_len - 3) | (3 << 2)); /* send!! */ + + tda8083_wait_diseqc_fifo (state, 100); + + return 0; +} + +static int tda8083_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct tda8083_state* state = fe->demodulator_priv; + + u8 signal = ~tda8083_readreg (state, 0x01); + u8 sync = tda8083_readreg (state, 0x02); + + *status = 0; + + if (signal > 10) + *status |= FE_HAS_SIGNAL; + + if (sync & 0x01) + *status |= FE_HAS_CARRIER; + + if (sync & 0x02) + *status |= FE_HAS_VITERBI; + + if (sync & 0x10) + *status |= FE_HAS_SYNC; + + if (sync & 0x20) /* frontend can not lock */ + *status |= FE_TIMEDOUT; + + if ((sync & 0x1f) == 0x1f) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int tda8083_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct tda8083_state* state = fe->demodulator_priv; + int ret; + u8 buf[3]; + + if ((ret = tda8083_readregs(state, 0x0b, buf, sizeof(buf)))) + return ret; + + *ber = ((buf[0] & 0x1f) << 16) | (buf[1] << 8) | buf[2]; + + return 0; +} + +static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct tda8083_state* state = fe->demodulator_priv; + + u8 signal = ~tda8083_readreg (state, 0x01); + *strength = (signal << 8) | signal; + + return 0; +} + +static int tda8083_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct tda8083_state* state = fe->demodulator_priv; + + u8 _snr = tda8083_readreg (state, 0x08); + *snr = (_snr << 8) | _snr; + + return 0; +} + +static int tda8083_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct tda8083_state* state = fe->demodulator_priv; + + *ucblocks = tda8083_readreg(state, 0x0f); + if (*ucblocks == 0xff) + *ucblocks = 0xffffffff; + + return 0; +} + +static int tda8083_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct tda8083_state* state = fe->demodulator_priv; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + tda8083_set_inversion (state, p->inversion); + tda8083_set_fec(state, p->fec_inner); + tda8083_set_symbolrate(state, p->symbol_rate); + + tda8083_writereg (state, 0x00, 0x3c); + tda8083_writereg (state, 0x00, 0x04); + + return 0; +} + +static int tda8083_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct tda8083_state* state = fe->demodulator_priv; + + /* FIXME: get symbolrate & frequency offset...*/ + /*p->frequency = ???;*/ + p->inversion = (tda8083_readreg (state, 0x0e) & 0x80) ? + INVERSION_ON : INVERSION_OFF; + p->fec_inner = tda8083_get_fec(state); + /*p->symbol_rate = tda8083_get_symbolrate (state);*/ + + return 0; +} + +static int tda8083_sleep(struct dvb_frontend* fe) +{ + struct tda8083_state* state = fe->demodulator_priv; + + tda8083_writereg (state, 0x00, 0x02); + return 0; +} + +static int tda8083_init(struct dvb_frontend* fe) +{ + struct tda8083_state* state = fe->demodulator_priv; + int i; + + for (i=0; i<44; i++) + tda8083_writereg (state, i, tda8083_init_tab[i]); + + tda8083_writereg (state, 0x00, 0x3c); + tda8083_writereg (state, 0x00, 0x04); + + return 0; +} + +static int tda8083_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +{ + struct tda8083_state* state = fe->demodulator_priv; + + tda8083_send_diseqc_burst (state, burst); + tda8083_writereg (state, 0x00, 0x3c); + tda8083_writereg (state, 0x00, 0x04); + + return 0; +} + +static int tda8083_diseqc_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct tda8083_state* state = fe->demodulator_priv; + + tda8083_set_tone (state, tone); + tda8083_writereg (state, 0x00, 0x3c); + tda8083_writereg (state, 0x00, 0x04); + + return 0; +} + +static int tda8083_diseqc_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct tda8083_state* state = fe->demodulator_priv; + + tda8083_set_voltage (state, voltage); + tda8083_writereg (state, 0x00, 0x3c); + tda8083_writereg (state, 0x00, 0x04); + + return 0; +} + +static void tda8083_release(struct dvb_frontend* fe) +{ + struct tda8083_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops tda8083_ops; + +struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, + struct i2c_adapter* i2c) +{ + struct tda8083_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* check if the demod is there */ + if ((tda8083_readreg(state, 0x00)) != 0x05) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda8083_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops tda8083_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Philips TDA8083 DVB-S", + .frequency_min = 920000, /* TDA8060 */ + .frequency_max = 2200000, /* TDA8060 */ + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + /* .frequency_tolerance = ???,*/ + .symbol_rate_min = 12000000, + .symbol_rate_max = 30000000, + /* .symbol_rate_tolerance = ???,*/ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_MUTE_TS + }, + + .release = tda8083_release, + + .init = tda8083_init, + .sleep = tda8083_sleep, + + .set_frontend = tda8083_set_frontend, + .get_frontend = tda8083_get_frontend, + + .read_status = tda8083_read_status, + .read_signal_strength = tda8083_read_signal_strength, + .read_snr = tda8083_read_snr, + .read_ber = tda8083_read_ber, + .read_ucblocks = tda8083_read_ucblocks, + + .diseqc_send_master_cmd = tda8083_send_diseqc_msg, + .diseqc_send_burst = tda8083_diseqc_send_burst, + .set_tone = tda8083_diseqc_set_tone, + .set_voltage = tda8083_diseqc_set_voltage, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Philips TDA8083 DVB-S Demodulator"); +MODULE_AUTHOR("Ralph Metzler, Holger Waechtler"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(tda8083_attach); diff --git a/drivers/media/dvb-frontends/tda8083.h b/drivers/media/dvb-frontends/tda8083.h new file mode 100644 index 00000000..de6b1860 --- /dev/null +++ b/drivers/media/dvb-frontends/tda8083.h @@ -0,0 +1,50 @@ +/* + Driver for Grundig 29504-491, a Philips TDA8083 based QPSK Frontend + + Copyright (C) 2001 Convergence Integrated Media GmbH + + written by Ralph Metzler + + adoption to the new DVB frontend API and diagnostic ioctl's + by Holger Waechtler + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef TDA8083_H +#define TDA8083_H + +#include + +struct tda8083_config +{ + /* the demodulator's i2c address */ + u8 demod_address; +}; + +#if IS_ENABLED(CONFIG_DVB_TDA8083) +extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_TDA8083 + +#endif // TDA8083_H diff --git a/drivers/media/dvb-frontends/tda8261.c b/drivers/media/dvb-frontends/tda8261.c new file mode 100644 index 00000000..19c48881 --- /dev/null +++ b/drivers/media/dvb-frontends/tda8261.c @@ -0,0 +1,230 @@ +/* + TDA8261 8PSK/QPSK tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "tda8261.h" + +struct tda8261_state { + struct dvb_frontend *fe; + struct i2c_adapter *i2c; + const struct tda8261_config *config; + + /* state cache */ + u32 frequency; + u32 bandwidth; +}; + +static int tda8261_read(struct tda8261_state *state, u8 *buf) +{ + const struct tda8261_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD,.buf = buf, .len = 1 }; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) + pr_err("%s: read error, err=%d\n", __func__, err); + + return err; +} + +static int tda8261_write(struct tda8261_state *state, u8 *buf) +{ + const struct tda8261_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = 4 }; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) + pr_err("%s: write error, err=%d\n", __func__, err); + + return err; +} + +static int tda8261_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct tda8261_state *state = fe->tuner_priv; + u8 result = 0; + int err = 0; + + *status = 0; + + if ((err = tda8261_read(state, &result)) < 0) { + pr_err("%s: I/O Error\n", __func__); + return err; + } + if ((result >> 6) & 0x01) { + pr_debug("%s: Tuner Phase Locked\n", __func__); + *status = 1; + } + + return err; +} + +static const u32 div_tab[] = { 2000, 1000, 500, 250, 125 }; /* kHz */ +static const u8 ref_div[] = { 0x00, 0x01, 0x02, 0x05, 0x07 }; + +static int tda8261_get_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda8261_state *state = fe->tuner_priv; + int err = 0; + + switch (param) { + case DVBFE_TUNER_FREQUENCY: + tstate->frequency = state->frequency; + break; + case DVBFE_TUNER_BANDWIDTH: + tstate->bandwidth = 40000000; /* FIXME! need to calculate Bandwidth */ + break; + default: + pr_err("%s: Unknown parameter (param=%d)\n", __func__, param); + err = -EINVAL; + break; + } + + return err; +} + +static int tda8261_set_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda8261_state *state = fe->tuner_priv; + const struct tda8261_config *config = state->config; + u32 frequency, N, status = 0; + u8 buf[4]; + int err = 0; + + if (param & DVBFE_TUNER_FREQUENCY) { + /** + * N = Max VCO Frequency / Channel Spacing + * Max VCO Frequency = VCO frequency + (channel spacing - 1) + * (to account for half channel spacing on either side) + */ + frequency = tstate->frequency; + if ((frequency < 950000) || (frequency > 2150000)) { + pr_warn("%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); + return -EINVAL; + } + N = (frequency + (div_tab[config->step_size] - 1)) / div_tab[config->step_size]; + pr_debug("%s: Step size=%d, Divider=%d, PG=0x%02x (%d)\n", + __func__, config->step_size, div_tab[config->step_size], N, N); + + buf[0] = (N >> 8) & 0xff; + buf[1] = N & 0xff; + buf[2] = (0x01 << 7) | ((ref_div[config->step_size] & 0x07) << 1); + + if (frequency < 1450000) + buf[3] = 0x00; + else if (frequency < 2000000) + buf[3] = 0x40; + else if (frequency < 2150000) + buf[3] = 0x80; + + /* Set params */ + if ((err = tda8261_write(state, buf)) < 0) { + pr_err("%s: I/O Error\n", __func__); + return err; + } + /* sleep for some time */ + pr_debug("%s: Waiting to Phase LOCK\n", __func__); + msleep(20); + /* check status */ + if ((err = tda8261_get_status(fe, &status)) < 0) { + pr_err("%s: I/O Error\n", __func__); + return err; + } + if (status == 1) { + pr_debug("%s: Tuner Phase locked: status=%d\n", __func__, status); + state->frequency = frequency; /* cache successful state */ + } else { + pr_debug("%s: No Phase lock: status=%d\n", __func__, status); + } + } else { + pr_err("%s: Unknown parameter (param=%d)\n", __func__, param); + return -EINVAL; + } + + return 0; +} + +static int tda8261_release(struct dvb_frontend *fe) +{ + struct tda8261_state *state = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(state); + return 0; +} + +static struct dvb_tuner_ops tda8261_ops = { + + .info = { + .name = "TDA8261", +// .tuner_name = NULL, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_step = 0 + }, + + .set_state = tda8261_set_state, + .get_state = tda8261_get_state, + .get_status = tda8261_get_status, + .release = tda8261_release +}; + +struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe, + const struct tda8261_config *config, + struct i2c_adapter *i2c) +{ + struct tda8261_state *state = NULL; + + if ((state = kzalloc(sizeof (struct tda8261_state), GFP_KERNEL)) == NULL) + goto exit; + + state->config = config; + state->i2c = i2c; + state->fe = fe; + fe->tuner_priv = state; + fe->ops.tuner_ops = tda8261_ops; + + fe->ops.tuner_ops.info.frequency_step = div_tab[config->step_size]; +// fe->ops.tuner_ops.tuner_name = &config->buf; + +// printk("%s: Attaching %s TDA8261 8PSK/QPSK tuner\n", +// __func__, fe->ops.tuner_ops.tuner_name); + pr_info("%s: Attaching TDA8261 8PSK/QPSK tuner\n", __func__); + + return fe; + +exit: + kfree(state); + return NULL; +} + +EXPORT_SYMBOL(tda8261_attach); + +MODULE_AUTHOR("Manu Abraham"); +MODULE_DESCRIPTION("TDA8261 8PSK/QPSK Tuner"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/tda8261.h b/drivers/media/dvb-frontends/tda8261.h new file mode 100644 index 00000000..55cf4ffc --- /dev/null +++ b/drivers/media/dvb-frontends/tda8261.h @@ -0,0 +1,55 @@ +/* + TDA8261 8PSK/QPSK tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __TDA8261_H +#define __TDA8261_H + +enum tda8261_step { + TDA8261_STEP_2000 = 0, /* 2000 kHz */ + TDA8261_STEP_1000, /* 1000 kHz */ + TDA8261_STEP_500, /* 500 kHz */ + TDA8261_STEP_250, /* 250 kHz */ + TDA8261_STEP_125 /* 125 kHz */ +}; + +struct tda8261_config { +// u8 buf[16]; + u8 addr; + enum tda8261_step step_size; +}; + +#if IS_ENABLED(CONFIG_DVB_TDA8261) + +extern struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe, + const struct tda8261_config *config, + struct i2c_adapter *i2c); + +#else + +static inline struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe, + const struct tda8261_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif //CONFIG_DVB_TDA8261 + +#endif// __TDA8261_H diff --git a/drivers/media/dvb-frontends/tda8261_cfg.h b/drivers/media/dvb-frontends/tda8261_cfg.h new file mode 100644 index 00000000..46710744 --- /dev/null +++ b/drivers/media/dvb-frontends/tda8261_cfg.h @@ -0,0 +1,84 @@ +/* + TDA8261 8PSK/QPSK tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +static int tda8261_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state t_state; + int err = 0; + + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->get_state) { + if ((err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &t_state)) < 0) { + printk("%s: Invalid parameter\n", __func__); + return err; + } + *frequency = t_state.frequency; + printk("%s: Frequency=%d\n", __func__, t_state.frequency); + } + return 0; +} + +static int tda8261_set_frequency(struct dvb_frontend *fe, u32 frequency) +{ + struct dvb_frontend_ops *frontend_ops = NULL; + struct dvb_tuner_ops *tuner_ops = NULL; + struct tuner_state t_state; + int err = 0; + + t_state.frequency = frequency; + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->set_state) { + if ((err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &t_state)) < 0) { + printk("%s: Invalid parameter\n", __func__); + return err; + } + } + printk("%s: Frequency=%d\n", __func__, t_state.frequency); + return 0; +} + +static int tda8261_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct dvb_frontend_ops *frontend_ops = &fe->ops; + struct dvb_tuner_ops *tuner_ops = &frontend_ops->tuner_ops; + struct tuner_state t_state; + int err = 0; + + if (&fe->ops) + frontend_ops = &fe->ops; + if (&frontend_ops->tuner_ops) + tuner_ops = &frontend_ops->tuner_ops; + if (tuner_ops->get_state) { + if ((err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state)) < 0) { + printk("%s: Invalid parameter\n", __func__); + return err; + } + *bandwidth = t_state.bandwidth; + printk("%s: Bandwidth=%d\n", __func__, t_state.bandwidth); + } + return 0; +} diff --git a/drivers/media/dvb-frontends/tda826x.c b/drivers/media/dvb-frontends/tda826x.c new file mode 100644 index 00000000..04bbcc24 --- /dev/null +++ b/drivers/media/dvb-frontends/tda826x.c @@ -0,0 +1,188 @@ + /* + Driver for Philips tda8262/tda8263 DVBS Silicon tuners + + (c) 2006 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#include +#include +#include +#include + +#include "tda826x.h" + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "tda826x: " args); \ + } while (0) + +struct tda826x_priv { + /* i2c details */ + int i2c_address; + struct i2c_adapter *i2c; + u8 has_loopthrough:1; + u32 frequency; +}; + +static int tda826x_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int tda826x_sleep(struct dvb_frontend *fe) +{ + struct tda826x_priv *priv = fe->tuner_priv; + int ret; + u8 buf [] = { 0x00, 0x8d }; + struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 2 }; + + dprintk("%s:\n", __func__); + + if (!priv->has_loopthrough) + buf[1] = 0xad; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) { + dprintk("%s: i2c error\n", __func__); + } + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret == 1) ? 0 : ret; +} + +static int tda826x_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct tda826x_priv *priv = fe->tuner_priv; + int ret; + u32 div; + u32 ksyms; + u32 bandwidth; + u8 buf [11]; + struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 11 }; + + dprintk("%s:\n", __func__); + + div = (p->frequency + (1000-1)) / 1000; + + /* BW = ((1 + RO) * SR/2 + 5) * 1.3 [SR in MSPS, BW in MHz] */ + /* with R0 = 0.35 and some transformations: */ + ksyms = p->symbol_rate / 1000; + bandwidth = (878 * ksyms + 6500000) / 1000000 + 1; + if (bandwidth < 5) + bandwidth = 5; + else if (bandwidth > 36) + bandwidth = 36; + + buf[0] = 0x00; // subaddress + buf[1] = 0x09; // powerdown RSSI + the magic value 1 + if (!priv->has_loopthrough) + buf[1] |= 0x20; // power down loopthrough if not needed + buf[2] = (1<<5) | 0x0b; // 1Mhz + 0.45 VCO + buf[3] = div >> 7; + buf[4] = div << 1; + buf[5] = ((bandwidth - 5) << 3) | 7; /* baseband cut-off */ + buf[6] = 0xfe; // baseband gain 9 db + no RF attenuation + buf[7] = 0x83; // charge pumps at high, tests off + buf[8] = 0x80; // recommended value 4 for AMPVCO + disable ports. + buf[9] = 0x1a; // normal caltime + recommended values for SELTH + SELVTL + buf[10] = 0xd4; // recommended value 13 for BBIAS + unknown bit set on + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) { + dprintk("%s: i2c error\n", __func__); + } + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + priv->frequency = div * 1000; + + return (ret == 1) ? 0 : ret; +} + +static int tda826x_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct tda826x_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static struct dvb_tuner_ops tda826x_tuner_ops = { + .info = { + .name = "Philips TDA826X", + .frequency_min = 950000, + .frequency_max = 2175000 + }, + .release = tda826x_release, + .sleep = tda826x_sleep, + .set_params = tda826x_set_params, + .get_frequency = tda826x_get_frequency, +}; + +struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough) +{ + struct tda826x_priv *priv = NULL; + u8 b1 [] = { 0, 0 }; + struct i2c_msg msg[2] = { + { .addr = addr, .flags = 0, .buf = NULL, .len = 0 }, + { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } + }; + int ret; + + dprintk("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + ret = i2c_transfer (i2c, msg, 2); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (ret != 2) + return NULL; + if (!(b1[1] & 0x80)) + return NULL; + + priv = kzalloc(sizeof(struct tda826x_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = addr; + priv->i2c = i2c; + priv->has_loopthrough = has_loopthrough; + + memcpy(&fe->ops.tuner_ops, &tda826x_tuner_ops, sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = priv; + + return fe; +} +EXPORT_SYMBOL(tda826x_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("DVB TDA826x driver"); +MODULE_AUTHOR("Andrew de Quincey"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/tda826x.h b/drivers/media/dvb-frontends/tda826x.h new file mode 100644 index 00000000..5f0f20e7 --- /dev/null +++ b/drivers/media/dvb-frontends/tda826x.h @@ -0,0 +1,53 @@ + /* + Driver for Philips tda8262/tda8263 DVBS Silicon tuners + + (c) 2006 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#ifndef __DVB_TDA826X_H__ +#define __DVB_TDA826X_H__ + +#include +#include "dvb_frontend.h" + +/** + * Attach a tda826x tuner to the supplied frontend structure. + * + * @param fe Frontend to attach to. + * @param addr i2c address of the tuner. + * @param i2c i2c adapter to use. + * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector. + * @return FE pointer on success, NULL on failure. + */ +#if IS_ENABLED(CONFIG_DVB_TDA826X) +extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr, + struct i2c_adapter *i2c, + int has_loopthrough); +#else +static inline struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, + int addr, + struct i2c_adapter *i2c, + int has_loopthrough) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_TDA826X + +#endif // __DVB_TDA826X_H__ diff --git a/drivers/media/dvb-frontends/tdhd1.h b/drivers/media/dvb-frontends/tdhd1.h new file mode 100644 index 00000000..17750985 --- /dev/null +++ b/drivers/media/dvb-frontends/tdhd1.h @@ -0,0 +1,74 @@ +/* + * tdhd1.h - ALPS TDHD1-204A tuner support + * + * Copyright (C) 2008 Oliver Endriss + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * The project's page is at http://www.linuxtv.org + */ + +#ifndef TDHD1_H +#define TDHD1_H + +#include "tda1004x.h" + +static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name); + +static struct tda1004x_config alps_tdhd1_204a_config = { + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = alps_tdhd1_204_request_firmware +}; + +static int alps_tdhd1_204a_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct i2c_adapter *i2c = fe->tuner_priv; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + u32 div; + + div = (p->frequency + 36166666) / 166666; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x85; + + if (p->frequency >= 174000000 && p->frequency <= 230000000) + data[3] = 0x02; + else if (p->frequency >= 470000000 && p->frequency <= 823000000) + data[3] = 0x0C; + else if (p->frequency > 823000000 && p->frequency <= 862000000) + data[3] = 0x8C; + else + return -EINVAL; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(i2c, &msg, 1) != 1) + return -EIO; + + return 0; +} + +#endif /* TDHD1_H */ diff --git a/drivers/media/dvb-frontends/ts2020.c b/drivers/media/dvb-frontends/ts2020.c new file mode 100644 index 00000000..ad7ad857 --- /dev/null +++ b/drivers/media/dvb-frontends/ts2020.c @@ -0,0 +1,373 @@ +/* + Montage Technology TS2020 - Silicon Tuner driver + Copyright (C) 2009-2012 Konstantin Dimitrov + + Copyright (C) 2009-2012 TurboSight.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "dvb_frontend.h" +#include "ts2020.h" + +#define TS2020_XTAL_FREQ 27000 /* in kHz */ +#define FREQ_OFFSET_LOW_SYM_RATE 3000 + +struct ts2020_priv { + /* i2c details */ + int i2c_address; + struct i2c_adapter *i2c; + u8 clk_out_div; + u32 frequency; +}; + +static int ts2020_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int ts2020_writereg(struct dvb_frontend *fe, int reg, int data) +{ + struct ts2020_priv *priv = fe->tuner_priv; + u8 buf[] = { reg, data }; + struct i2c_msg msg[] = { + { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 2 + } + }; + int err; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + err = i2c_transfer(priv->i2c, msg, 1); + if (err != 1) { + printk(KERN_ERR + "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n", + __func__, err, reg, data); + return -EREMOTEIO; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int ts2020_readreg(struct dvb_frontend *fe, u8 reg) +{ + struct ts2020_priv *priv = fe->tuner_priv; + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = priv->i2c_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = priv->i2c_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, msg, 2); + + if (ret != 2) { + printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", + __func__, reg, ret); + return ret; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return b1[0]; +} + +static int ts2020_sleep(struct dvb_frontend *fe) +{ + struct ts2020_priv *priv = fe->tuner_priv; + int ret; + u8 buf[] = { 10, 0 }; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + printk(KERN_ERR "%s: i2c error\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret == 1) ? 0 : ret; +} + +static int ts2020_init(struct dvb_frontend *fe) +{ + struct ts2020_priv *priv = fe->tuner_priv; + + ts2020_writereg(fe, 0x42, 0x73); + ts2020_writereg(fe, 0x05, priv->clk_out_div); + ts2020_writereg(fe, 0x20, 0x27); + ts2020_writereg(fe, 0x07, 0x02); + ts2020_writereg(fe, 0x11, 0xff); + ts2020_writereg(fe, 0x60, 0xf9); + ts2020_writereg(fe, 0x08, 0x01); + ts2020_writereg(fe, 0x00, 0x41); + + return 0; +} + +static int ts2020_tuner_gate_ctrl(struct dvb_frontend *fe, u8 offset) +{ + int ret; + ret = ts2020_writereg(fe, 0x51, 0x1f - offset); + ret |= ts2020_writereg(fe, 0x51, 0x1f); + ret |= ts2020_writereg(fe, 0x50, offset); + ret |= ts2020_writereg(fe, 0x50, 0x00); + msleep(20); + return ret; +} + +static int ts2020_set_tuner_rf(struct dvb_frontend *fe) +{ + int reg; + + reg = ts2020_readreg(fe, 0x3d); + reg &= 0x7f; + if (reg < 0x16) + reg = 0xa1; + else if (reg == 0x16) + reg = 0x99; + else + reg = 0xf9; + + ts2020_writereg(fe, 0x60, reg); + reg = ts2020_tuner_gate_ctrl(fe, 0x08); + + return reg; +} + +static int ts2020_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct ts2020_priv *priv = fe->tuner_priv; + int ret; + u32 frequency = c->frequency; + s32 offset_khz; + u32 symbol_rate = (c->symbol_rate / 1000); + u32 f3db, gdiv28; + u16 value, ndiv, lpf_coeff; + u8 lpf_mxdiv, mlpf_max, mlpf_min, nlpf; + u8 lo = 0x01, div4 = 0x0; + + /* Calculate frequency divider */ + if (frequency < 1060000) { + lo |= 0x10; + div4 = 0x1; + ndiv = (frequency * 14 * 4) / TS2020_XTAL_FREQ; + } else + ndiv = (frequency * 14 * 2) / TS2020_XTAL_FREQ; + ndiv = ndiv + ndiv % 2; + ndiv = ndiv - 1024; + + ret = ts2020_writereg(fe, 0x10, 0x80 | lo); + + /* Set frequency divider */ + ret |= ts2020_writereg(fe, 0x01, (ndiv >> 8) & 0xf); + ret |= ts2020_writereg(fe, 0x02, ndiv & 0xff); + + ret |= ts2020_writereg(fe, 0x03, 0x06); + ret |= ts2020_tuner_gate_ctrl(fe, 0x10); + if (ret < 0) + return -ENODEV; + + /* Tuner Frequency Range */ + ret = ts2020_writereg(fe, 0x10, lo); + + ret |= ts2020_tuner_gate_ctrl(fe, 0x08); + + /* Tuner RF */ + ret |= ts2020_set_tuner_rf(fe); + + gdiv28 = (TS2020_XTAL_FREQ / 1000 * 1694 + 500) / 1000; + ret |= ts2020_writereg(fe, 0x04, gdiv28 & 0xff); + ret |= ts2020_tuner_gate_ctrl(fe, 0x04); + if (ret < 0) + return -ENODEV; + + value = ts2020_readreg(fe, 0x26); + + f3db = (symbol_rate * 135) / 200 + 2000; + f3db += FREQ_OFFSET_LOW_SYM_RATE; + if (f3db < 7000) + f3db = 7000; + if (f3db > 40000) + f3db = 40000; + + gdiv28 = gdiv28 * 207 / (value * 2 + 151); + mlpf_max = gdiv28 * 135 / 100; + mlpf_min = gdiv28 * 78 / 100; + if (mlpf_max > 63) + mlpf_max = 63; + + lpf_coeff = 2766; + + nlpf = (f3db * gdiv28 * 2 / lpf_coeff / + (TS2020_XTAL_FREQ / 1000) + 1) / 2; + if (nlpf > 23) + nlpf = 23; + if (nlpf < 1) + nlpf = 1; + + lpf_mxdiv = (nlpf * (TS2020_XTAL_FREQ / 1000) + * lpf_coeff * 2 / f3db + 1) / 2; + + if (lpf_mxdiv < mlpf_min) { + nlpf++; + lpf_mxdiv = (nlpf * (TS2020_XTAL_FREQ / 1000) + * lpf_coeff * 2 / f3db + 1) / 2; + } + + if (lpf_mxdiv > mlpf_max) + lpf_mxdiv = mlpf_max; + + ret = ts2020_writereg(fe, 0x04, lpf_mxdiv); + ret |= ts2020_writereg(fe, 0x06, nlpf); + + ret |= ts2020_tuner_gate_ctrl(fe, 0x04); + + ret |= ts2020_tuner_gate_ctrl(fe, 0x01); + + msleep(80); + /* calculate offset assuming 96000kHz*/ + offset_khz = (ndiv - ndiv % 2 + 1024) * TS2020_XTAL_FREQ + / (6 + 8) / (div4 + 1) / 2; + + priv->frequency = offset_khz; + + return (ret < 0) ? -EINVAL : 0; +} + +static int ts2020_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct ts2020_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +/* read TS2020 signal strength */ +static int ts2020_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + u16 sig_reading, sig_strength; + u8 rfgain, bbgain; + + rfgain = ts2020_readreg(fe, 0x3d) & 0x1f; + bbgain = ts2020_readreg(fe, 0x21) & 0x1f; + + if (rfgain > 15) + rfgain = 15; + if (bbgain > 13) + bbgain = 13; + + sig_reading = rfgain * 2 + bbgain * 3; + + sig_strength = 40 + (64 - sig_reading) * 50 / 64 ; + + /* cook the value to be suitable for szap-s2 human readable output */ + *signal_strength = sig_strength * 1000; + + return 0; +} + +static struct dvb_tuner_ops ts2020_tuner_ops = { + .info = { + .name = "TS2020", + .frequency_min = 950000, + .frequency_max = 2150000 + }, + .init = ts2020_init, + .release = ts2020_release, + .sleep = ts2020_sleep, + .set_params = ts2020_set_params, + .get_frequency = ts2020_get_frequency, + .get_rf_strength = ts2020_read_signal_strength, +}; + +struct dvb_frontend *ts2020_attach(struct dvb_frontend *fe, + const struct ts2020_config *config, + struct i2c_adapter *i2c) +{ + struct ts2020_priv *priv = NULL; + u8 buf; + + priv = kzalloc(sizeof(struct ts2020_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = config->tuner_address; + priv->i2c = i2c; + priv->clk_out_div = config->clk_out_div; + fe->tuner_priv = priv; + + /* Wake Up the tuner */ + if ((0x03 & ts2020_readreg(fe, 0x00)) == 0x00) { + ts2020_writereg(fe, 0x00, 0x01); + msleep(2); + } + + ts2020_writereg(fe, 0x00, 0x03); + msleep(2); + + /* Check the tuner version */ + buf = ts2020_readreg(fe, 0x00); + if ((buf == 0x01) || (buf == 0x41) || (buf == 0x81)) + printk(KERN_INFO "%s: Find tuner TS2020!\n", __func__); + else { + printk(KERN_ERR "%s: Read tuner reg[0] = %d\n", __func__, buf); + kfree(priv); + return NULL; + } + + memcpy(&fe->ops.tuner_ops, &ts2020_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + return fe; +} +EXPORT_SYMBOL(ts2020_attach); + +MODULE_AUTHOR("Konstantin Dimitrov "); +MODULE_DESCRIPTION("Montage Technology TS2020 - Silicon tuner driver module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/ts2020.h b/drivers/media/dvb-frontends/ts2020.h new file mode 100644 index 00000000..5bcb9a71 --- /dev/null +++ b/drivers/media/dvb-frontends/ts2020.h @@ -0,0 +1,50 @@ +/* + Montage Technology TS2020 - Silicon Tuner driver + Copyright (C) 2009-2012 Konstantin Dimitrov + + Copyright (C) 2009-2012 TurboSight.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef TS2020_H +#define TS2020_H + +#include +#include + +struct ts2020_config { + u8 tuner_address; + u8 clk_out_div; +}; + +#if IS_ENABLED(CONFIG_DVB_TS2020) + +extern struct dvb_frontend *ts2020_attach( + struct dvb_frontend *fe, + const struct ts2020_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *ts2020_attach( + struct dvb_frontend *fe, + const struct ts2020_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* TS2020_H */ diff --git a/drivers/media/dvb-frontends/tua6100.c b/drivers/media/dvb-frontends/tua6100.c new file mode 100644 index 00000000..029384d1 --- /dev/null +++ b/drivers/media/dvb-frontends/tua6100.c @@ -0,0 +1,206 @@ +/** + * Driver for Infineon tua6100 pll. + * + * (c) 2006 Andrew de Quincey + * + * Based on code found in budget-av.c, which has the following: + * Compiled from various sources by Michael Hunold + * + * CI interface support (c) 2004 Olivier Gournet & + * Andrew de Quincey + * + * Copyright (C) 2002 Ralph Metzler + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "tua6100.h" + +struct tua6100_priv { + /* i2c details */ + int i2c_address; + struct i2c_adapter *i2c; + u32 frequency; +}; + +static int tua6100_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int tua6100_sleep(struct dvb_frontend *fe) +{ + struct tua6100_priv *priv = fe->tuner_priv; + int ret; + u8 reg0[] = { 0x00, 0x00 }; + struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = reg0, .len = 2 }; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) { + printk("%s: i2c error\n", __func__); + } + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret == 1) ? 0 : ret; +} + +static int tua6100_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct tua6100_priv *priv = fe->tuner_priv; + u32 div; + u32 prediv; + u8 reg0[] = { 0x00, 0x00 }; + u8 reg1[] = { 0x01, 0x00, 0x00, 0x00 }; + u8 reg2[] = { 0x02, 0x00, 0x00 }; + struct i2c_msg msg0 = { .addr = priv->i2c_address, .flags = 0, .buf = reg0, .len = 2 }; + struct i2c_msg msg1 = { .addr = priv->i2c_address, .flags = 0, .buf = reg1, .len = 4 }; + struct i2c_msg msg2 = { .addr = priv->i2c_address, .flags = 0, .buf = reg2, .len = 3 }; + +#define _R 4 +#define _P 32 +#define _ri 4000000 + + // setup register 0 + if (c->frequency < 2000000) + reg0[1] = 0x03; + else + reg0[1] = 0x07; + + // setup register 1 + if (c->frequency < 1630000) + reg1[1] = 0x2c; + else + reg1[1] = 0x0c; + + if (_P == 64) + reg1[1] |= 0x40; + if (c->frequency >= 1525000) + reg1[1] |= 0x80; + + // register 2 + reg2[1] = (_R >> 8) & 0x03; + reg2[2] = _R; + if (c->frequency < 1455000) + reg2[1] |= 0x1c; + else if (c->frequency < 1630000) + reg2[1] |= 0x0c; + else + reg2[1] |= 0x1c; + + /* + * The N divisor ratio (note: c->frequency is in kHz, but we + * need it in Hz) + */ + prediv = (c->frequency * _R) / (_ri / 1000); + div = prediv / _P; + reg1[1] |= (div >> 9) & 0x03; + reg1[2] = div >> 1; + reg1[3] = (div << 7); + priv->frequency = ((div * _P) * (_ri / 1000)) / _R; + + // Finally, calculate and store the value for A + reg1[3] |= (prediv - (div*_P)) & 0x7f; + +#undef _R +#undef _P +#undef _ri + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(priv->i2c, &msg0, 1) != 1) + return -EIO; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(priv->i2c, &msg2, 1) != 1) + return -EIO; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(priv->i2c, &msg1, 1) != 1) + return -EIO; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int tua6100_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct tua6100_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static struct dvb_tuner_ops tua6100_tuner_ops = { + .info = { + .name = "Infineon TUA6100", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_step = 1000, + }, + .release = tua6100_release, + .sleep = tua6100_sleep, + .set_params = tua6100_set_params, + .get_frequency = tua6100_get_frequency, +}; + +struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c) +{ + struct tua6100_priv *priv = NULL; + u8 b1 [] = { 0x80 }; + u8 b2 [] = { 0x00 }; + struct i2c_msg msg [] = { { .addr = addr, .flags = 0, .buf = b1, .len = 1 }, + { .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 } }; + int ret; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + ret = i2c_transfer (i2c, msg, 2); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (ret != 2) + return NULL; + + priv = kzalloc(sizeof(struct tua6100_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = addr; + priv->i2c = i2c; + + memcpy(&fe->ops.tuner_ops, &tua6100_tuner_ops, sizeof(struct dvb_tuner_ops)); + fe->tuner_priv = priv; + return fe; +} +EXPORT_SYMBOL(tua6100_attach); + +MODULE_DESCRIPTION("DVB tua6100 driver"); +MODULE_AUTHOR("Andrew de Quincey"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/tua6100.h b/drivers/media/dvb-frontends/tua6100.h new file mode 100644 index 00000000..83a9c30e --- /dev/null +++ b/drivers/media/dvb-frontends/tua6100.h @@ -0,0 +1,47 @@ +/** + * Driver for Infineon tua6100 PLL. + * + * (c) 2006 Andrew de Quincey + * + * Based on code found in budget-av.c, which has the following: + * Compiled from various sources by Michael Hunold + * + * CI interface support (c) 2004 Olivier Gournet & + * Andrew de Quincey + * + * Copyright (C) 2002 Ralph Metzler + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __DVB_TUA6100_H__ +#define __DVB_TUA6100_H__ + +#include +#include "dvb_frontend.h" + +#if IS_ENABLED(CONFIG_DVB_TUA6100) +extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend* tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_TUA6100 + +#endif diff --git a/drivers/media/dvb-frontends/ves1820.c b/drivers/media/dvb-frontends/ves1820.c new file mode 100644 index 00000000..bb42b563 --- /dev/null +++ b/drivers/media/dvb-frontends/ves1820.c @@ -0,0 +1,447 @@ +/* + VES1820 - Single Chip Cable Channel Receiver driver module + + Copyright (C) 1999 Convergence Integrated Media GmbH + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "ves1820.h" + + + +struct ves1820_state { + struct i2c_adapter* i2c; + /* configuration settings */ + const struct ves1820_config* config; + struct dvb_frontend frontend; + + /* private demodulator data */ + u8 reg0; + u8 pwm; +}; + + +static int verbose; + +static u8 ves1820_inittab[] = { + 0x69, 0x6A, 0x93, 0x1A, 0x12, 0x46, 0x26, 0x1A, + 0x43, 0x6A, 0xAA, 0xAA, 0x1E, 0x85, 0x43, 0x20, + 0xE0, 0x00, 0xA1, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x40 +}; + +static int ves1820_writereg(struct ves1820_state *state, u8 reg, u8 data) +{ + u8 buf[] = { 0x00, reg, data }; + struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 3 }; + int ret; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk("ves1820: %s(): writereg error (reg == 0x%02x, " + "val == 0x%02x, ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static u8 ves1820_readreg(struct ves1820_state *state, u8 reg) +{ + u8 b0[] = { 0x00, reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 2}, + {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1} + }; + int ret; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk("ves1820: %s(): readreg error (reg == 0x%02x, " + "ret == %i)\n", __func__, reg, ret); + + return b1[0]; +} + +static int ves1820_setup_reg0(struct ves1820_state *state, u8 reg0, fe_spectral_inversion_t inversion) +{ + reg0 |= state->reg0 & 0x62; + + if (INVERSION_ON == inversion) { + if (!state->config->invert) reg0 |= 0x20; + else reg0 &= ~0x20; + } else if (INVERSION_OFF == inversion) { + if (!state->config->invert) reg0 &= ~0x20; + else reg0 |= 0x20; + } + + ves1820_writereg(state, 0x00, reg0 & 0xfe); + ves1820_writereg(state, 0x00, reg0 | 0x01); + + state->reg0 = reg0; + + return 0; +} + +static int ves1820_set_symbolrate(struct ves1820_state *state, u32 symbolrate) +{ + s32 BDR; + s32 BDRI; + s16 SFIL = 0; + u16 NDEC = 0; + u32 ratio; + u32 fin; + u32 tmp; + u64 fptmp; + u64 fpxin; + + if (symbolrate > state->config->xin / 2) + symbolrate = state->config->xin / 2; + + if (symbolrate < 500000) + symbolrate = 500000; + + if (symbolrate < state->config->xin / 16) + NDEC = 1; + if (symbolrate < state->config->xin / 32) + NDEC = 2; + if (symbolrate < state->config->xin / 64) + NDEC = 3; + + /* yeuch! */ + fpxin = state->config->xin * 10; + fptmp = fpxin; do_div(fptmp, 123); + if (symbolrate < fptmp) + SFIL = 1; + fptmp = fpxin; do_div(fptmp, 160); + if (symbolrate < fptmp) + SFIL = 0; + fptmp = fpxin; do_div(fptmp, 246); + if (symbolrate < fptmp) + SFIL = 1; + fptmp = fpxin; do_div(fptmp, 320); + if (symbolrate < fptmp) + SFIL = 0; + fptmp = fpxin; do_div(fptmp, 492); + if (symbolrate < fptmp) + SFIL = 1; + fptmp = fpxin; do_div(fptmp, 640); + if (symbolrate < fptmp) + SFIL = 0; + fptmp = fpxin; do_div(fptmp, 984); + if (symbolrate < fptmp) + SFIL = 1; + + fin = state->config->xin >> 4; + symbolrate <<= NDEC; + ratio = (symbolrate << 4) / fin; + tmp = ((symbolrate << 4) % fin) << 8; + ratio = (ratio << 8) + tmp / fin; + tmp = (tmp % fin) << 8; + ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, fin); + + BDR = ratio; + BDRI = (((state->config->xin << 5) / symbolrate) + 1) / 2; + + if (BDRI > 0xFF) + BDRI = 0xFF; + + SFIL = (SFIL << 4) | ves1820_inittab[0x0E]; + + NDEC = (NDEC << 6) | ves1820_inittab[0x03]; + + ves1820_writereg(state, 0x03, NDEC); + ves1820_writereg(state, 0x0a, BDR & 0xff); + ves1820_writereg(state, 0x0b, (BDR >> 8) & 0xff); + ves1820_writereg(state, 0x0c, (BDR >> 16) & 0x3f); + + ves1820_writereg(state, 0x0d, BDRI); + ves1820_writereg(state, 0x0e, SFIL); + + return 0; +} + +static int ves1820_init(struct dvb_frontend* fe) +{ + struct ves1820_state* state = fe->demodulator_priv; + int i; + + ves1820_writereg(state, 0, 0); + + for (i = 0; i < sizeof(ves1820_inittab); i++) + ves1820_writereg(state, i, ves1820_inittab[i]); + if (state->config->selagc) + ves1820_writereg(state, 2, ves1820_inittab[2] | 0x08); + + ves1820_writereg(state, 0x34, state->pwm); + + return 0; +} + +static int ves1820_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct ves1820_state* state = fe->demodulator_priv; + static const u8 reg0x00[] = { 0x00, 0x04, 0x08, 0x0c, 0x10 }; + static const u8 reg0x01[] = { 140, 140, 106, 100, 92 }; + static const u8 reg0x05[] = { 135, 100, 70, 54, 38 }; + static const u8 reg0x08[] = { 162, 116, 67, 52, 35 }; + static const u8 reg0x09[] = { 145, 150, 106, 126, 107 }; + int real_qam = p->modulation - QAM_16; + + if (real_qam < 0 || real_qam > 4) + return -EINVAL; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + ves1820_set_symbolrate(state, p->symbol_rate); + ves1820_writereg(state, 0x34, state->pwm); + + ves1820_writereg(state, 0x01, reg0x01[real_qam]); + ves1820_writereg(state, 0x05, reg0x05[real_qam]); + ves1820_writereg(state, 0x08, reg0x08[real_qam]); + ves1820_writereg(state, 0x09, reg0x09[real_qam]); + + ves1820_setup_reg0(state, reg0x00[real_qam], p->inversion); + ves1820_writereg(state, 2, ves1820_inittab[2] | (state->config->selagc ? 0x08 : 0)); + return 0; +} + +static int ves1820_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct ves1820_state* state = fe->demodulator_priv; + int sync; + + *status = 0; + sync = ves1820_readreg(state, 0x11); + + if (sync & 1) + *status |= FE_HAS_SIGNAL; + + if (sync & 2) + *status |= FE_HAS_CARRIER; + + if (sync & 2) /* XXX FIXME! */ + *status |= FE_HAS_VITERBI; + + if (sync & 4) + *status |= FE_HAS_SYNC; + + if (sync & 8) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int ves1820_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct ves1820_state* state = fe->demodulator_priv; + + u32 _ber = ves1820_readreg(state, 0x14) | + (ves1820_readreg(state, 0x15) << 8) | + ((ves1820_readreg(state, 0x16) & 0x0f) << 16); + *ber = 10 * _ber; + + return 0; +} + +static int ves1820_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct ves1820_state* state = fe->demodulator_priv; + + u8 gain = ves1820_readreg(state, 0x17); + *strength = (gain << 8) | gain; + + return 0; +} + +static int ves1820_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct ves1820_state* state = fe->demodulator_priv; + + u8 quality = ~ves1820_readreg(state, 0x18); + *snr = (quality << 8) | quality; + + return 0; +} + +static int ves1820_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct ves1820_state* state = fe->demodulator_priv; + + *ucblocks = ves1820_readreg(state, 0x13) & 0x7f; + if (*ucblocks == 0x7f) + *ucblocks = 0xffffffff; + + /* reset uncorrected block counter */ + ves1820_writereg(state, 0x10, ves1820_inittab[0x10] & 0xdf); + ves1820_writereg(state, 0x10, ves1820_inittab[0x10]); + + return 0; +} + +static int ves1820_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct ves1820_state* state = fe->demodulator_priv; + int sync; + s8 afc = 0; + + sync = ves1820_readreg(state, 0x11); + afc = ves1820_readreg(state, 0x19); + if (verbose) { + /* AFC only valid when carrier has been recovered */ + printk(sync & 2 ? "ves1820: AFC (%d) %dHz\n" : + "ves1820: [AFC (%d) %dHz]\n", afc, -((s32) p->symbol_rate * afc) >> 10); + } + + if (!state->config->invert) { + p->inversion = (state->reg0 & 0x20) ? INVERSION_ON : INVERSION_OFF; + } else { + p->inversion = (!(state->reg0 & 0x20)) ? INVERSION_ON : INVERSION_OFF; + } + + p->modulation = ((state->reg0 >> 2) & 7) + QAM_16; + + p->fec_inner = FEC_NONE; + + p->frequency = ((p->frequency + 31250) / 62500) * 62500; + if (sync & 2) + p->frequency -= ((s32) p->symbol_rate * afc) >> 10; + + return 0; +} + +static int ves1820_sleep(struct dvb_frontend* fe) +{ + struct ves1820_state* state = fe->demodulator_priv; + + ves1820_writereg(state, 0x1b, 0x02); /* pdown ADC */ + ves1820_writereg(state, 0x00, 0x80); /* standby */ + + return 0; +} + +static int ves1820_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + + fesettings->min_delay_ms = 200; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static void ves1820_release(struct dvb_frontend* fe) +{ + struct ves1820_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops ves1820_ops; + +struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, + struct i2c_adapter* i2c, + u8 pwm) +{ + struct ves1820_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->reg0 = ves1820_inittab[0]; + state->config = config; + state->i2c = i2c; + state->pwm = pwm; + + /* check if the demod is there */ + if ((ves1820_readreg(state, 0x1a) & 0xf0) != 0x70) + goto error; + + if (verbose) + printk("ves1820: pwm=0x%02x\n", state->pwm); + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &ves1820_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.ops.info.symbol_rate_min = (state->config->xin / 2) / 64; /* SACLK/64 == (XIN/2)/64 */ + state->frontend.ops.info.symbol_rate_max = (state->config->xin / 2) / 4; /* SACLK/4 */ + state->frontend.demodulator_priv = state; + + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops ves1820_ops = { + .delsys = { SYS_DVBC_ANNEX_A }, + .info = { + .name = "VLSI VES1820 DVB-C", + .frequency_stepsize = 62500, + .frequency_min = 47000000, + .frequency_max = 862000000, + .caps = FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_FEC_AUTO + }, + + .release = ves1820_release, + + .init = ves1820_init, + .sleep = ves1820_sleep, + + .set_frontend = ves1820_set_parameters, + .get_frontend = ves1820_get_frontend, + .get_tune_settings = ves1820_get_tune_settings, + + .read_status = ves1820_read_status, + .read_ber = ves1820_read_ber, + .read_signal_strength = ves1820_read_signal_strength, + .read_snr = ves1820_read_snr, + .read_ucblocks = ves1820_read_ucblocks, +}; + +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting"); + +MODULE_DESCRIPTION("VLSI VES1820 DVB-C Demodulator driver"); +MODULE_AUTHOR("Ralph Metzler, Holger Waechtler"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(ves1820_attach); diff --git a/drivers/media/dvb-frontends/ves1820.h b/drivers/media/dvb-frontends/ves1820.h new file mode 100644 index 00000000..c073f353 --- /dev/null +++ b/drivers/media/dvb-frontends/ves1820.h @@ -0,0 +1,56 @@ +/* + VES1820 - Single Chip Cable Channel Receiver driver module + + Copyright (C) 1999 Convergence Integrated Media GmbH + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef VES1820_H +#define VES1820_H + +#include + +#define VES1820_SELAGC_PWM 0 +#define VES1820_SELAGC_SIGNAMPERR 1 + +struct ves1820_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* value of XIN to use */ + u32 xin; + + /* does inversion need inverted? */ + u8 invert:1; + + /* SELAGC control */ + u8 selagc:1; +}; + +#if IS_ENABLED(CONFIG_DVB_VES1820) +extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, + struct i2c_adapter* i2c, u8 pwm); +#else +static inline struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, + struct i2c_adapter* i2c, u8 pwm) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_VES1820 + +#endif // VES1820_H diff --git a/drivers/media/dvb-frontends/ves1x93.c b/drivers/media/dvb-frontends/ves1x93.c new file mode 100644 index 00000000..9c17eaca --- /dev/null +++ b/drivers/media/dvb-frontends/ves1x93.c @@ -0,0 +1,553 @@ +/* + Driver for VES1893 and VES1993 QPSK Demodulators + + Copyright (C) 1999 Convergence Integrated Media GmbH + Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de> + Copyright (C) 2002 Dennis Noermann + Copyright (C) 2002-2003 Andreas Oberritter + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "ves1x93.h" + + +struct ves1x93_state { + struct i2c_adapter* i2c; + /* configuration settings */ + const struct ves1x93_config* config; + struct dvb_frontend frontend; + + /* previous uncorrected block counter */ + fe_spectral_inversion_t inversion; + u8 *init_1x93_tab; + u8 *init_1x93_wtab; + u8 tab_size; + u8 demod_type; + u32 frequency; +}; + +static int debug; +#define dprintk if (debug) printk + +#define DEMOD_VES1893 0 +#define DEMOD_VES1993 1 + +static u8 init_1893_tab [] = { + 0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4, + 0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00, + 0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00, + 0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x55, 0x00, 0x00, 0x7f, 0x00 +}; + +static u8 init_1993_tab [] = { + 0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c, + 0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00, + 0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10, + 0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03, + 0x00, 0x00, 0x0e, 0x80, 0x00 +}; + +static u8 init_1893_wtab[] = +{ + 1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0, + 0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1, + 1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0, + 1,1,1,0,1,1 +}; + +static u8 init_1993_wtab[] = +{ + 1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0, + 0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1, + 1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0, + 1,1,1,0,1,1,1,1, 1,1,1,1,1 +}; + +static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data) +{ + u8 buf [] = { 0x00, reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 }; + int err; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg) +{ + int ret; + u8 b0 [] = { 0x00, reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + ret = i2c_transfer (state->i2c, msg, 2); + + if (ret != 2) return ret; + + return b1[0]; +} + +static int ves1x93_clr_bit (struct ves1x93_state* state) +{ + msleep(10); + ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe); + ves1x93_writereg (state, 0, state->init_1x93_tab[0]); + msleep(50); + return 0; +} + +static int ves1x93_set_inversion (struct ves1x93_state* state, fe_spectral_inversion_t inversion) +{ + u8 val; + + /* + * inversion on/off are interchanged because i and q seem to + * be swapped on the hardware + */ + + switch (inversion) { + case INVERSION_OFF: + val = 0xc0; + break; + case INVERSION_ON: + val = 0x80; + break; + case INVERSION_AUTO: + val = 0x00; + break; + default: + return -EINVAL; + } + + return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val); +} + +static int ves1x93_set_fec (struct ves1x93_state* state, fe_code_rate_t fec) +{ + if (fec == FEC_AUTO) + return ves1x93_writereg (state, 0x0d, 0x08); + else if (fec < FEC_1_2 || fec > FEC_8_9) + return -EINVAL; + else + return ves1x93_writereg (state, 0x0d, fec - FEC_1_2); +} + +static fe_code_rate_t ves1x93_get_fec (struct ves1x93_state* state) +{ + return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7); +} + +static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate) +{ + u32 BDR; + u32 ratio; + u8 ADCONF, FCONF, FNR, AGCR; + u32 BDRI; + u32 tmp; + u32 FIN; + + dprintk("%s: srate == %d\n", __func__, (unsigned int) srate); + + if (srate > state->config->xin/2) + srate = state->config->xin/2; + + if (srate < 500000) + srate = 500000; + +#define MUL (1UL<<26) + + FIN = (state->config->xin + 6000) >> 4; + + tmp = srate << 6; + ratio = tmp / FIN; + + tmp = (tmp % FIN) << 8; + ratio = (ratio << 8) + tmp / FIN; + + tmp = (tmp % FIN) << 8; + ratio = (ratio << 8) + tmp / FIN; + + FNR = 0xff; + + if (ratio < MUL/3) FNR = 0; + if (ratio < (MUL*11)/50) FNR = 1; + if (ratio < MUL/6) FNR = 2; + if (ratio < MUL/9) FNR = 3; + if (ratio < MUL/12) FNR = 4; + if (ratio < (MUL*11)/200) FNR = 5; + if (ratio < MUL/24) FNR = 6; + if (ratio < (MUL*27)/1000) FNR = 7; + if (ratio < MUL/48) FNR = 8; + if (ratio < (MUL*137)/10000) FNR = 9; + + if (FNR == 0xff) { + ADCONF = 0x89; + FCONF = 0x80; + FNR = 0; + } else { + ADCONF = 0x81; + FCONF = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5); + /*FCONF = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/ + } + + BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1; + BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1; + + dprintk("FNR= %d\n", FNR); + dprintk("ratio= %08x\n", (unsigned int) ratio); + dprintk("BDR= %08x\n", (unsigned int) BDR); + dprintk("BDRI= %02x\n", (unsigned int) BDRI); + + if (BDRI > 0xff) + BDRI = 0xff; + + ves1x93_writereg (state, 0x06, 0xff & BDR); + ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8)); + ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16)); + + ves1x93_writereg (state, 0x09, BDRI); + ves1x93_writereg (state, 0x20, ADCONF); + ves1x93_writereg (state, 0x21, FCONF); + + AGCR = state->init_1x93_tab[0x05]; + if (state->config->invert_pwm) + AGCR |= 0x20; + + if (srate < 6000000) + AGCR |= 0x80; + else + AGCR &= ~0x80; + + ves1x93_writereg (state, 0x05, AGCR); + + /* ves1993 hates this, will lose lock */ + if (state->demod_type != DEMOD_VES1993) + ves1x93_clr_bit (state); + + return 0; +} + +static int ves1x93_init (struct dvb_frontend* fe) +{ + struct ves1x93_state* state = fe->demodulator_priv; + int i; + int val; + + dprintk("%s: init chip\n", __func__); + + for (i = 0; i < state->tab_size; i++) { + if (state->init_1x93_wtab[i]) { + val = state->init_1x93_tab[i]; + + if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */ + ves1x93_writereg (state, i, val); + } + } + + return 0; +} + +static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + switch (voltage) { + case SEC_VOLTAGE_13: + return ves1x93_writereg (state, 0x1f, 0x20); + case SEC_VOLTAGE_18: + return ves1x93_writereg (state, 0x1f, 0x30); + case SEC_VOLTAGE_OFF: + return ves1x93_writereg (state, 0x1f, 0x00); + default: + return -EINVAL; + } +} + +static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + u8 sync = ves1x93_readreg (state, 0x0e); + + /* + * The ves1893 sometimes returns sync values that make no sense, + * because, e.g., the SIGNAL bit is 0, while some of the higher + * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?). + * Tests showed that the VITERBI and SYNC bits are returned + * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong. + * If such a case occurs, we read the value again, until we get a + * valid value. + */ + int maxtry = 10; /* just for safety - let's not get stuck here */ + while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) { + msleep(10); + sync = ves1x93_readreg (state, 0x0e); + } + + *status = 0; + + if (sync & 1) + *status |= FE_HAS_SIGNAL; + + if (sync & 2) + *status |= FE_HAS_CARRIER; + + if (sync & 4) + *status |= FE_HAS_VITERBI; + + if (sync & 8) + *status |= FE_HAS_SYNC; + + if ((sync & 0x1f) == 0x1f) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + *ber = ves1x93_readreg (state, 0x15); + *ber |= (ves1x93_readreg (state, 0x16) << 8); + *ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16); + *ber *= 10; + + return 0; +} + +static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + u8 signal = ~ves1x93_readreg (state, 0x0b); + *strength = (signal << 8) | signal; + + return 0; +} + +static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + u8 _snr = ~ves1x93_readreg (state, 0x1c); + *snr = (_snr << 8) | _snr; + + return 0; +} + +static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + *ucblocks = ves1x93_readreg (state, 0x18) & 0x7f; + + if (*ucblocks == 0x7f) + *ucblocks = 0xffffffff; /* counter overflow... */ + + ves1x93_writereg (state, 0x18, 0x00); /* reset the counter */ + ves1x93_writereg (state, 0x18, 0x80); /* dto. */ + + return 0; +} + +static int ves1x93_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct ves1x93_state* state = fe->demodulator_priv; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + ves1x93_set_inversion (state, p->inversion); + ves1x93_set_fec(state, p->fec_inner); + ves1x93_set_symbolrate(state, p->symbol_rate); + state->inversion = p->inversion; + state->frequency = p->frequency; + + return 0; +} + +static int ves1x93_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct ves1x93_state* state = fe->demodulator_priv; + int afc; + + afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2; + afc = (afc * (int)(p->symbol_rate/1000/8))/16; + + p->frequency = state->frequency - afc; + + /* + * inversion indicator is only valid + * if auto inversion was used + */ + if (state->inversion == INVERSION_AUTO) + p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ? + INVERSION_OFF : INVERSION_ON; + p->fec_inner = ves1x93_get_fec(state); + /* XXX FIXME: timing offset !! */ + + return 0; +} + +static int ves1x93_sleep(struct dvb_frontend* fe) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + return ves1x93_writereg (state, 0x00, 0x08); +} + +static void ves1x93_release(struct dvb_frontend* fe) +{ + struct ves1x93_state* state = fe->demodulator_priv; + kfree(state); +} + +static int ves1x93_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + if (enable) { + return ves1x93_writereg(state, 0x00, 0x11); + } else { + return ves1x93_writereg(state, 0x00, 0x01); + } +} + +static struct dvb_frontend_ops ves1x93_ops; + +struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, + struct i2c_adapter* i2c) +{ + struct ves1x93_state* state = NULL; + u8 identity; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->inversion = INVERSION_OFF; + + /* check if the demod is there + identify it */ + identity = ves1x93_readreg(state, 0x1e); + switch (identity) { + case 0xdc: /* VES1893A rev1 */ + printk("ves1x93: Detected ves1893a rev1\n"); + state->demod_type = DEMOD_VES1893; + state->init_1x93_tab = init_1893_tab; + state->init_1x93_wtab = init_1893_wtab; + state->tab_size = sizeof(init_1893_tab); + break; + + case 0xdd: /* VES1893A rev2 */ + printk("ves1x93: Detected ves1893a rev2\n"); + state->demod_type = DEMOD_VES1893; + state->init_1x93_tab = init_1893_tab; + state->init_1x93_wtab = init_1893_wtab; + state->tab_size = sizeof(init_1893_tab); + break; + + case 0xde: /* VES1993 */ + printk("ves1x93: Detected ves1993\n"); + state->demod_type = DEMOD_VES1993; + state->init_1x93_tab = init_1993_tab; + state->init_1x93_wtab = init_1993_wtab; + state->tab_size = sizeof(init_1993_tab); + break; + + default: + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops ves1x93_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "VLSI VES1x93 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .frequency_tolerance = 29500, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + /* .symbol_rate_tolerance = ???,*/ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK + }, + + .release = ves1x93_release, + + .init = ves1x93_init, + .sleep = ves1x93_sleep, + .i2c_gate_ctrl = ves1x93_i2c_gate_ctrl, + + .set_frontend = ves1x93_set_frontend, + .get_frontend = ves1x93_get_frontend, + + .read_status = ves1x93_read_status, + .read_ber = ves1x93_read_ber, + .read_signal_strength = ves1x93_read_signal_strength, + .read_snr = ves1x93_read_snr, + .read_ucblocks = ves1x93_read_ucblocks, + + .set_voltage = ves1x93_set_voltage, +}; + +module_param(debug, int, 0644); + +MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver"); +MODULE_AUTHOR("Ralph Metzler"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(ves1x93_attach); diff --git a/drivers/media/dvb-frontends/ves1x93.h b/drivers/media/dvb-frontends/ves1x93.h new file mode 100644 index 00000000..2307caea --- /dev/null +++ b/drivers/media/dvb-frontends/ves1x93.h @@ -0,0 +1,55 @@ +/* + Driver for VES1893 and VES1993 QPSK Demodulators + + Copyright (C) 1999 Convergence Integrated Media GmbH + Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de> + Copyright (C) 2002 Dennis Noermann + Copyright (C) 2002-2003 Andreas Oberritter + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef VES1X93_H +#define VES1X93_H + +#include + +struct ves1x93_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* value of XIN to use */ + u32 xin; + + /* should PWM be inverted? */ + u8 invert_pwm:1; +}; + +#if IS_ENABLED(CONFIG_DVB_VES1X93) +extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif // CONFIG_DVB_VES1X93 + +#endif // VES1X93_H diff --git a/drivers/media/dvb-frontends/z0194a.h b/drivers/media/dvb-frontends/z0194a.h new file mode 100644 index 00000000..96d86d6e --- /dev/null +++ b/drivers/media/dvb-frontends/z0194a.h @@ -0,0 +1,85 @@ +/* z0194a.h Sharp z0194a tuner support +* +* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation, version 2. +* +* see Documentation/dvb/README.dvb-usb for more information +*/ + +#ifndef Z0194A +#define Z0194A + +static int sharp_z0194a_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; bclk = 0x47; } + else if (srate < 3000000) { + aclk = 0xb7; bclk = 0x4b; } + else if (srate < 7000000) { + aclk = 0xb7; bclk = 0x4f; } + else if (srate < 14000000) { + aclk = 0xb7; bclk = 0x53; } + else if (srate < 30000000) { + aclk = 0xb6; bclk = 0x53; } + else if (srate < 45000000) { + aclk = 0xb4; bclk = 0x51; } + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + + return 0; +} + +static u8 sharp_z0194a_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, /* AGC2 0x3d */ + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, /* lock detector threshold */ + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, /* out imp: normal out type: parallel FEC mode:0 */ + 0x29, 0x1e, /* 1/2 threshold */ + 0x2a, 0x14, /* 2/3 threshold */ + 0x2b, 0x0f, /* 3/4 threshold */ + 0x2c, 0x09, /* 5/6 threshold */ + 0x2d, 0x05, /* 7/8 threshold */ + 0x2e, 0x01, + 0x31, 0x1f, /* test all FECs */ + 0x32, 0x19, /* viterbi and synchro search */ + 0x33, 0xfc, /* rs control */ + 0x34, 0x93, /* error control */ + 0x0f, 0x52, + 0xff, 0xff +}; + +#endif diff --git a/drivers/media/dvb-frontends/zl10036.c b/drivers/media/dvb-frontends/zl10036.c new file mode 100644 index 00000000..0903d461 --- /dev/null +++ b/drivers/media/dvb-frontends/zl10036.c @@ -0,0 +1,520 @@ +/** + * Driver for Zarlink zl10036 DVB-S silicon tuner + * + * Copyright (C) 2006 Tino Reichardt + * Copyright (C) 2007-2009 Matthias Schwarzott + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License Version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ** + * The data sheet for this tuner can be found at: + * http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf + * + * This one is working: (at my Avermedia DVB-S Pro) + * - zl10036 (40pin, FTA) + * + * A driver for zl10038 should be very similar. + */ + +#include +#include +#include +#include + +#include "zl10036.h" + +static int zl10036_debug; +#define dprintk(level, args...) \ + do { if (zl10036_debug & level) printk(KERN_DEBUG "zl10036: " args); \ + } while (0) + +#define deb_info(args...) dprintk(0x01, args) +#define deb_i2c(args...) dprintk(0x02, args) + +struct zl10036_state { + struct i2c_adapter *i2c; + const struct zl10036_config *config; + u32 frequency; + u8 br, bf; +}; + + +/* This driver assumes the tuner is driven by a 10.111MHz Cristal */ +#define _XTAL 10111 + +/* Some of the possible dividers: + * 64, (write 0x05 to reg), freq step size 158kHz + * 10, (write 0x0a to reg), freq step size 1.011kHz (used here) + * 5, (write 0x09 to reg), freq step size 2.022kHz + */ + +#define _RDIV 10 +#define _RDIV_REG 0x0a +#define _FR (_XTAL/_RDIV) + +#define STATUS_POR 0x80 /* Power on Reset */ +#define STATUS_FL 0x40 /* Frequency & Phase Lock */ + +/* read/write for zl10036 and zl10038 */ + +static int zl10036_read_status_reg(struct zl10036_state *state) +{ + u8 status; + struct i2c_msg msg[1] = { + { .addr = state->config->tuner_address, .flags = I2C_M_RD, + .buf = &status, .len = sizeof(status) }, + }; + + if (i2c_transfer(state->i2c, msg, 1) != 1) { + printk(KERN_ERR "%s: i2c read failed at addr=%02x\n", + __func__, state->config->tuner_address); + return -EIO; + } + + deb_i2c("R(status): %02x [FL=%d]\n", status, + (status & STATUS_FL) ? 1 : 0); + if (status & STATUS_POR) + deb_info("%s: Power-On-Reset bit enabled - " + "need to initialize the tuner\n", __func__); + + return status; +} + +static int zl10036_write(struct zl10036_state *state, u8 buf[], u8 count) +{ + struct i2c_msg msg[1] = { + { .addr = state->config->tuner_address, .flags = 0, + .buf = buf, .len = count }, + }; + u8 reg = 0; + int ret; + + if (zl10036_debug & 0x02) { + /* every 8bit-value satisifes this! + * so only check for debug log */ + if ((buf[0] & 0x80) == 0x00) + reg = 2; + else if ((buf[0] & 0xc0) == 0x80) + reg = 4; + else if ((buf[0] & 0xf0) == 0xc0) + reg = 6; + else if ((buf[0] & 0xf0) == 0xd0) + reg = 8; + else if ((buf[0] & 0xf0) == 0xe0) + reg = 10; + else if ((buf[0] & 0xf0) == 0xf0) + reg = 12; + + deb_i2c("W(%d):", reg); + { + int i; + for (i = 0; i < count; i++) + printk(KERN_CONT " %02x", buf[i]); + printk(KERN_CONT "\n"); + } + } + + ret = i2c_transfer(state->i2c, msg, 1); + if (ret != 1) { + printk(KERN_ERR "%s: i2c error, ret=%d\n", __func__, ret); + return -EIO; + } + + return 0; +} + +static int zl10036_release(struct dvb_frontend *fe) +{ + struct zl10036_state *state = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(state); + + return 0; +} + +static int zl10036_sleep(struct dvb_frontend *fe) +{ + struct zl10036_state *state = fe->tuner_priv; + u8 buf[] = { 0xf0, 0x80 }; /* regs 12/13 */ + int ret; + + deb_info("%s\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + + ret = zl10036_write(state, buf, sizeof(buf)); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + + return ret; +} + +/** + * register map of the ZL10036/ZL10038 + * + * reg[default] content + * 2[0x00]: 0 | N14 | N13 | N12 | N11 | N10 | N9 | N8 + * 3[0x00]: N7 | N6 | N5 | N4 | N3 | N2 | N1 | N0 + * 4[0x80]: 1 | 0 | RFG | BA1 | BA0 | BG1 | BG0 | LEN + * 5[0x00]: P0 | C1 | C0 | R4 | R3 | R2 | R1 | R0 + * 6[0xc0]: 1 | 1 | 0 | 0 | RSD | 0 | 0 | 0 + * 7[0x20]: P1 | BF6 | BF5 | BF4 | BF3 | BF2 | BF1 | 0 + * 8[0xdb]: 1 | 1 | 0 | 1 | 0 | CC | 1 | 1 + * 9[0x30]: VSD | V2 | V1 | V0 | S3 | S2 | S1 | S0 + * 10[0xe1]: 1 | 1 | 1 | 0 | 0 | LS2 | LS1 | LS0 + * 11[0xf5]: WS | WH2 | WH1 | WH0 | WL2 | WL1 | WL0 | WRE + * 12[0xf0]: 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 + * 13[0x28]: PD | BR4 | BR3 | BR2 | BR1 | BR0 | CLR | TL + */ + +static int zl10036_set_frequency(struct zl10036_state *state, u32 frequency) +{ + u8 buf[2]; + u32 div, foffset; + + div = (frequency + _FR/2) / _FR; + state->frequency = div * _FR; + + foffset = frequency - state->frequency; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + + deb_info("%s: ftodo=%u fpriv=%u ferr=%d div=%u\n", __func__, + frequency, state->frequency, foffset, div); + + return zl10036_write(state, buf, sizeof(buf)); +} + +static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw) +{ + /* fbw is measured in kHz */ + u8 br, bf; + int ret; + u8 buf_bf[] = { + 0xc0, 0x00, /* 6/7: rsd=0 bf=0 */ + }; + u8 buf_br[] = { + 0xf0, 0x00, /* 12/13: br=0xa clr=0 tl=0*/ + }; + u8 zl10036_rsd_off[] = { 0xc8 }; /* set RSD=1 */ + + /* ensure correct values */ + if (fbw > 35000) + fbw = 35000; + if (fbw < 8000) + fbw = 8000; + +#define _BR_MAXIMUM (_XTAL/575) /* _XTAL / 575kHz = 17 */ + + /* <= 28,82 MHz */ + if (fbw <= 28820) { + br = _BR_MAXIMUM; + } else { + /** + * f(bw)=34,6MHz f(xtal)=10.111MHz + * br = (10111/34600) * 63 * 1/K = 14; + */ + br = ((_XTAL * 21 * 1000) / (fbw * 419)); + } + + /* ensure correct values */ + if (br < 4) + br = 4; + if (br > _BR_MAXIMUM) + br = _BR_MAXIMUM; + + /* + * k = 1.257 + * bf = fbw/_XTAL * br * k - 1 */ + + bf = (fbw * br * 1257) / (_XTAL * 1000) - 1; + + /* ensure correct values */ + if (bf > 62) + bf = 62; + + buf_bf[1] = (bf << 1) & 0x7e; + buf_br[1] = (br << 2) & 0x7c; + deb_info("%s: BW=%d br=%u bf=%u\n", __func__, fbw, br, bf); + + if (br != state->br) { + ret = zl10036_write(state, buf_br, sizeof(buf_br)); + if (ret < 0) + return ret; + } + + if (bf != state->bf) { + ret = zl10036_write(state, buf_bf, sizeof(buf_bf)); + if (ret < 0) + return ret; + + /* time = br/(32* fxtal) */ + /* minimal sleep time to be calculated + * maximum br is 63 -> max time = 2 /10 MHz = 2e-7 */ + msleep(1); + + ret = zl10036_write(state, zl10036_rsd_off, + sizeof(zl10036_rsd_off)); + if (ret < 0) + return ret; + } + + state->br = br; + state->bf = bf; + + return 0; +} + +static int zl10036_set_gain_params(struct zl10036_state *state, + int c) +{ + u8 buf[2]; + u8 rfg, ba, bg; + + /* default values */ + rfg = 0; /* enable when using an lna */ + ba = 1; + bg = 1; + + /* reg 4 */ + buf[0] = 0x80 | ((rfg << 5) & 0x20) + | ((ba << 3) & 0x18) | ((bg << 1) & 0x06); + + if (!state->config->rf_loop_enable) + buf[0] |= 0x01; + + /* P0=0 */ + buf[1] = _RDIV_REG | ((c << 5) & 0x60); + + deb_info("%s: c=%u rfg=%u ba=%u bg=%u\n", __func__, c, rfg, ba, bg); + return zl10036_write(state, buf, sizeof(buf)); +} + +static int zl10036_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct zl10036_state *state = fe->tuner_priv; + int ret = 0; + u32 frequency = p->frequency; + u32 fbw; + int i; + u8 c; + + /* ensure correct values + * maybe redundant as core already checks this */ + if ((frequency < fe->ops.info.frequency_min) + || (frequency > fe->ops.info.frequency_max)) + return -EINVAL; + + /** + * alpha = 1.35 for dvb-s + * fBW = (alpha*symbolrate)/(2*0.8) + * 1.35 / (2*0.8) = 27 / 32 + */ + fbw = (27 * p->symbol_rate) / 32; + + /* scale to kHz */ + fbw /= 1000; + + /* Add safe margin of 3MHz */ + fbw += 3000; + + /* setting the charge pump - guessed values */ + if (frequency < 950000) + return -EINVAL; + else if (frequency < 1250000) + c = 0; + else if (frequency < 1750000) + c = 1; + else if (frequency < 2175000) + c = 2; + else + return -EINVAL; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + + ret = zl10036_set_gain_params(state, c); + if (ret < 0) + goto error; + + ret = zl10036_set_frequency(state, p->frequency); + if (ret < 0) + goto error; + + ret = zl10036_set_bandwidth(state, fbw); + if (ret < 0) + goto error; + + /* wait for tuner lock - no idea if this is really needed */ + for (i = 0; i < 20; i++) { + ret = zl10036_read_status_reg(state); + if (ret < 0) + goto error; + + /* check Frequency & Phase Lock Bit */ + if (ret & STATUS_FL) + break; + + msleep(10); + } + +error: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + + return ret; +} + +static int zl10036_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct zl10036_state *state = fe->tuner_priv; + + *frequency = state->frequency; + + return 0; +} + +static int zl10036_init_regs(struct zl10036_state *state) +{ + int ret; + int i; + + /* could also be one block from reg 2 to 13 and additional 10/11 */ + u8 zl10036_init_tab[][2] = { + { 0x04, 0x00 }, /* 2/3: div=0x400 - arbitrary value */ + { 0x8b, _RDIV_REG }, /* 4/5: rfg=0 ba=1 bg=1 len=? */ + /* p0=0 c=0 r=_RDIV_REG */ + { 0xc0, 0x20 }, /* 6/7: rsd=0 bf=0x10 */ + { 0xd3, 0x40 }, /* 8/9: from datasheet */ + { 0xe3, 0x5b }, /* 10/11: lock window level */ + { 0xf0, 0x28 }, /* 12/13: br=0xa clr=0 tl=0*/ + { 0xe3, 0xf9 }, /* 10/11: unlock window level */ + }; + + /* invalid values to trigger writing */ + state->br = 0xff; + state->bf = 0xff; + + if (!state->config->rf_loop_enable) + zl10036_init_tab[1][0] |= 0x01; + + deb_info("%s\n", __func__); + + for (i = 0; i < ARRAY_SIZE(zl10036_init_tab); i++) { + ret = zl10036_write(state, zl10036_init_tab[i], 2); + if (ret < 0) + return ret; + } + + return 0; +} + +static int zl10036_init(struct dvb_frontend *fe) +{ + struct zl10036_state *state = fe->tuner_priv; + int ret = 0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + + ret = zl10036_read_status_reg(state); + if (ret < 0) + return ret; + + /* Only init if Power-on-Reset bit is set? */ + ret = zl10036_init_regs(state); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + + return ret; +} + +static struct dvb_tuner_ops zl10036_tuner_ops = { + .info = { + .name = "Zarlink ZL10036", + .frequency_min = 950000, + .frequency_max = 2175000 + }, + .init = zl10036_init, + .release = zl10036_release, + .sleep = zl10036_sleep, + .set_params = zl10036_set_params, + .get_frequency = zl10036_get_frequency, +}; + +struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe, + const struct zl10036_config *config, + struct i2c_adapter *i2c) +{ + struct zl10036_state *state; + int ret; + + if (!config) { + printk(KERN_ERR "%s: no config specified", __func__); + return NULL; + } + + state = kzalloc(sizeof(struct zl10036_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->i2c = i2c; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + + ret = zl10036_read_status_reg(state); + if (ret < 0) { + printk(KERN_ERR "%s: No zl10036 found\n", __func__); + goto error; + } + + ret = zl10036_init_regs(state); + if (ret < 0) { + printk(KERN_ERR "%s: tuner initialization failed\n", + __func__); + goto error; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + + fe->tuner_priv = state; + + memcpy(&fe->ops.tuner_ops, &zl10036_tuner_ops, + sizeof(struct dvb_tuner_ops)); + printk(KERN_INFO "%s: tuner initialization (%s addr=0x%02x) ok\n", + __func__, fe->ops.tuner_ops.info.name, config->tuner_address); + + return fe; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(zl10036_attach); + +module_param_named(debug, zl10036_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); +MODULE_DESCRIPTION("DVB ZL10036 driver"); +MODULE_AUTHOR("Tino Reichardt"); +MODULE_AUTHOR("Matthias Schwarzott"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/zl10036.h b/drivers/media/dvb-frontends/zl10036.h new file mode 100644 index 00000000..5f1e8217 --- /dev/null +++ b/drivers/media/dvb-frontends/zl10036.h @@ -0,0 +1,53 @@ +/** + * Driver for Zarlink ZL10036 DVB-S silicon tuner + * + * Copyright (C) 2006 Tino Reichardt + * Copyright (C) 2007-2009 Matthias Schwarzott + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License Version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef DVB_ZL10036_H +#define DVB_ZL10036_H + +#include +#include +#include "dvb_frontend.h" + +/** + * Attach a zl10036 tuner to the supplied frontend structure. + * + * @param fe Frontend to attach to. + * @param config zl10036_config structure + * @return FE pointer on success, NULL on failure. + */ + +struct zl10036_config { + u8 tuner_address; + int rf_loop_enable; +}; + +#if IS_ENABLED(CONFIG_DVB_ZL10036) +extern struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe, + const struct zl10036_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe, + const struct zl10036_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* DVB_ZL10036_H */ diff --git a/drivers/media/dvb-frontends/zl10039.c b/drivers/media/dvb-frontends/zl10039.c new file mode 100644 index 00000000..91b6b2e9 --- /dev/null +++ b/drivers/media/dvb-frontends/zl10039.c @@ -0,0 +1,317 @@ +/* + * Driver for Zarlink ZL10039 DVB-S tuner + * + * Copyright 2007 Jan D. Louw + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "zl10039.h" + +static int debug; + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG args); \ + } while (0) + +enum zl10039_model_id { + ID_ZL10039 = 1 +}; + +struct zl10039_state { + struct i2c_adapter *i2c; + u8 i2c_addr; + u8 id; +}; + +enum zl10039_reg_addr { + PLL0 = 0, + PLL1, + PLL2, + PLL3, + RFFE, + BASE0, + BASE1, + BASE2, + LO0, + LO1, + LO2, + LO3, + LO4, + LO5, + LO6, + GENERAL +}; + +static int zl10039_read(const struct zl10039_state *state, + const enum zl10039_reg_addr reg, u8 *buf, + const size_t count) +{ + u8 regbuf[] = { reg }; + struct i2c_msg msg[] = { + {/* Write register address */ + .addr = state->i2c_addr, + .flags = 0, + .buf = regbuf, + .len = 1, + }, {/* Read count bytes */ + .addr = state->i2c_addr, + .flags = I2C_M_RD, + .buf = buf, + .len = count, + }, + }; + + dprintk("%s\n", __func__); + + if (i2c_transfer(state->i2c, msg, 2) != 2) { + dprintk("%s: i2c read error\n", __func__); + return -EREMOTEIO; + } + + return 0; /* Success */ +} + +static int zl10039_write(struct zl10039_state *state, + const enum zl10039_reg_addr reg, const u8 *src, + const size_t count) +{ + u8 buf[MAX_XFER_SIZE]; + struct i2c_msg msg = { + .addr = state->i2c_addr, + .flags = 0, + .buf = buf, + .len = count + 1, + }; + + if (1 + count > sizeof(buf)) { + printk(KERN_WARNING + "%s: i2c wr reg=%04x: len=%zd is too big!\n", + KBUILD_MODNAME, reg, count); + return -EINVAL; + } + + dprintk("%s\n", __func__); + /* Write register address and data in one go */ + buf[0] = reg; + memcpy(&buf[1], src, count); + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + dprintk("%s: i2c write error\n", __func__); + return -EREMOTEIO; + } + + return 0; /* Success */ +} + +static inline int zl10039_readreg(struct zl10039_state *state, + const enum zl10039_reg_addr reg, u8 *val) +{ + return zl10039_read(state, reg, val, 1); +} + +static inline int zl10039_writereg(struct zl10039_state *state, + const enum zl10039_reg_addr reg, + const u8 val) +{ + return zl10039_write(state, reg, &val, 1); +} + +static int zl10039_init(struct dvb_frontend *fe) +{ + struct zl10039_state *state = fe->tuner_priv; + int ret; + + dprintk("%s\n", __func__); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + /* Reset logic */ + ret = zl10039_writereg(state, GENERAL, 0x40); + if (ret < 0) { + dprintk("Note: i2c write error normal when resetting the " + "tuner\n"); + } + /* Wake up */ + ret = zl10039_writereg(state, GENERAL, 0x01); + if (ret < 0) { + dprintk("Tuner power up failed\n"); + return ret; + } + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int zl10039_sleep(struct dvb_frontend *fe) +{ + struct zl10039_state *state = fe->tuner_priv; + int ret; + + dprintk("%s\n", __func__); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + ret = zl10039_writereg(state, GENERAL, 0x80); + if (ret < 0) { + dprintk("Tuner sleep failed\n"); + return ret; + } + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int zl10039_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct zl10039_state *state = fe->tuner_priv; + u8 buf[6]; + u8 bf; + u32 fbw; + u32 div; + int ret; + + dprintk("%s\n", __func__); + dprintk("Set frequency = %d, symbol rate = %d\n", + c->frequency, c->symbol_rate); + + /* Assumed 10.111 MHz crystal oscillator */ + /* Cancelled num/den 80 to prevent overflow */ + div = (c->frequency * 1000) / 126387; + fbw = (c->symbol_rate * 27) / 32000; + /* Cancelled num/den 10 to prevent overflow */ + bf = ((fbw * 5088) / 1011100) - 1; + + /*PLL divider*/ + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + /*Reference divider*/ + /* Select reference ratio of 80 */ + buf[2] = 0x1D; + /*PLL test modes*/ + buf[3] = 0x40; + /*RF Control register*/ + buf[4] = 0x6E; /* Bypass enable */ + /*Baseband filter cutoff */ + buf[5] = bf; + + /* Open i2c gate */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + /* BR = 10, Enable filter adjustment */ + ret = zl10039_writereg(state, BASE1, 0x0A); + if (ret < 0) + goto error; + /* Write new config values */ + ret = zl10039_write(state, PLL0, buf, sizeof(buf)); + if (ret < 0) + goto error; + /* BR = 10, Disable filter adjustment */ + ret = zl10039_writereg(state, BASE1, 0x6A); + if (ret < 0) + goto error; + + /* Close i2c gate */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + return 0; +error: + dprintk("Error setting tuner\n"); + return ret; +} + +static int zl10039_release(struct dvb_frontend *fe) +{ + struct zl10039_state *state = fe->tuner_priv; + + dprintk("%s\n", __func__); + kfree(state); + fe->tuner_priv = NULL; + return 0; +} + +static struct dvb_tuner_ops zl10039_ops = { + .release = zl10039_release, + .init = zl10039_init, + .sleep = zl10039_sleep, + .set_params = zl10039_set_params, +}; + +struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, + u8 i2c_addr, struct i2c_adapter *i2c) +{ + struct zl10039_state *state = NULL; + + dprintk("%s\n", __func__); + state = kmalloc(sizeof(struct zl10039_state), GFP_KERNEL); + if (state == NULL) + goto error; + + state->i2c = i2c; + state->i2c_addr = i2c_addr; + + /* Open i2c gate */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + /* check if this is a valid tuner */ + if (zl10039_readreg(state, GENERAL, &state->id) < 0) { + /* Close i2c gate */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + goto error; + } + /* Close i2c gate */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + state->id = state->id & 0x0f; + switch (state->id) { + case ID_ZL10039: + strcpy(fe->ops.tuner_ops.info.name, + "Zarlink ZL10039 DVB-S tuner"); + break; + default: + dprintk("Chip ID=%x does not match a known type\n", state->id); + goto error; + } + + memcpy(&fe->ops.tuner_ops, &zl10039_ops, sizeof(struct dvb_tuner_ops)); + fe->tuner_priv = state; + dprintk("Tuner attached @ i2c address 0x%02x\n", i2c_addr); + return fe; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(zl10039_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); +MODULE_DESCRIPTION("Zarlink ZL10039 DVB-S tuner driver"); +MODULE_AUTHOR("Jan D. Louw "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/zl10039.h b/drivers/media/dvb-frontends/zl10039.h new file mode 100644 index 00000000..750b9bca --- /dev/null +++ b/drivers/media/dvb-frontends/zl10039.h @@ -0,0 +1,41 @@ +/* + Driver for Zarlink ZL10039 DVB-S tuner + + Copyright (C) 2007 Jan D. Louw + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef ZL10039_H +#define ZL10039_H + +#include + +#if IS_ENABLED(CONFIG_DVB_ZL10039) +struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, + u8 i2c_addr, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, + u8 i2c_addr, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_ZL10039 */ + +#endif /* ZL10039_H */ diff --git a/drivers/media/dvb-frontends/zl10353.c b/drivers/media/dvb-frontends/zl10353.c new file mode 100644 index 00000000..82946cd5 --- /dev/null +++ b/drivers/media/dvb-frontends/zl10353.c @@ -0,0 +1,684 @@ +/* + * Driver for Zarlink DVB-T ZL10353 demodulator + * + * Copyright (C) 2006, 2007 Christopher Pascoe + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "zl10353_priv.h" +#include "zl10353.h" + +struct zl10353_state { + struct i2c_adapter *i2c; + struct dvb_frontend frontend; + + struct zl10353_config config; + + u32 bandwidth; + u32 ucblocks; + u32 frequency; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "zl10353: " args); \ + } while (0) + +static int debug_regs; + +static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val) +{ + struct zl10353_state *state = fe->demodulator_priv; + u8 buf[2] = { reg, val }; + struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0, + .buf = buf, .len = 2 }; + int err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + printk("zl10353: write to reg %x failed (err = %d)!\n", reg, err); + return err; + } + return 0; +} + +static int zl10353_write(struct dvb_frontend *fe, const u8 ibuf[], int ilen) +{ + int err, i; + for (i = 0; i < ilen - 1; i++) + if ((err = zl10353_single_write(fe, ibuf[0] + i, ibuf[i + 1]))) + return err; + + return 0; +} + +static int zl10353_read_register(struct zl10353_state *state, u8 reg) +{ + int ret; + u8 b0[1] = { reg }; + u8 b1[1] = { 0 }; + struct i2c_msg msg[2] = { { .addr = state->config.demod_address, + .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config.demod_address, + .flags = I2C_M_RD, + .buf = b1, .len = 1 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + printk("%s: readreg error (reg=%d, ret==%i)\n", + __func__, reg, ret); + return ret; + } + + return b1[0]; +} + +static void zl10353_dump_regs(struct dvb_frontend *fe) +{ + struct zl10353_state *state = fe->demodulator_priv; + int ret; + u8 reg; + + /* Dump all registers. */ + for (reg = 0; ; reg++) { + if (reg % 16 == 0) { + if (reg) + printk(KERN_CONT "\n"); + printk(KERN_DEBUG "%02x:", reg); + } + ret = zl10353_read_register(state, reg); + if (ret >= 0) + printk(KERN_CONT " %02x", (u8)ret); + else + printk(KERN_CONT " --"); + if (reg == 0xff) + break; + } + printk(KERN_CONT "\n"); +} + +static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, + u32 bandwidth, + u16 *nominal_rate) +{ + struct zl10353_state *state = fe->demodulator_priv; + u32 adc_clock = 450560; /* 45.056 MHz */ + u64 value; + u8 bw = bandwidth / 1000000; + + if (state->config.adc_clock) + adc_clock = state->config.adc_clock; + + value = (u64)10 * (1 << 23) / 7 * 125; + value = (bw * value) + adc_clock / 2; + do_div(value, adc_clock); + *nominal_rate = value; + + dprintk("%s: bw %d, adc_clock %d => 0x%x\n", + __func__, bw, adc_clock, *nominal_rate); +} + +static void zl10353_calc_input_freq(struct dvb_frontend *fe, + u16 *input_freq) +{ + struct zl10353_state *state = fe->demodulator_priv; + u32 adc_clock = 450560; /* 45.056 MHz */ + int if2 = 361667; /* 36.1667 MHz */ + int ife; + u64 value; + + if (state->config.adc_clock) + adc_clock = state->config.adc_clock; + if (state->config.if2) + if2 = state->config.if2; + + if (adc_clock >= if2 * 2) + ife = if2; + else { + ife = adc_clock - (if2 % adc_clock); + if (ife > adc_clock / 2) + ife = adc_clock - ife; + } + value = (u64)65536 * ife + adc_clock / 2; + do_div(value, adc_clock); + *input_freq = -value; + + dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n", + __func__, if2, ife, adc_clock, -(int)value, *input_freq); +} + +static int zl10353_sleep(struct dvb_frontend *fe) +{ + static u8 zl10353_softdown[] = { 0x50, 0x0C, 0x44 }; + + zl10353_write(fe, zl10353_softdown, sizeof(zl10353_softdown)); + return 0; +} + +static int zl10353_set_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct zl10353_state *state = fe->demodulator_priv; + u16 nominal_rate, input_freq; + u8 pllbuf[6] = { 0x67 }, acq_ctl = 0; + u16 tps = 0; + + state->frequency = c->frequency; + + zl10353_single_write(fe, RESET, 0x80); + udelay(200); + zl10353_single_write(fe, 0xEA, 0x01); + udelay(200); + zl10353_single_write(fe, 0xEA, 0x00); + + zl10353_single_write(fe, AGC_TARGET, 0x28); + + if (c->transmission_mode != TRANSMISSION_MODE_AUTO) + acq_ctl |= (1 << 0); + if (c->guard_interval != GUARD_INTERVAL_AUTO) + acq_ctl |= (1 << 1); + zl10353_single_write(fe, ACQ_CTL, acq_ctl); + + switch (c->bandwidth_hz) { + case 6000000: + /* These are extrapolated from the 7 and 8MHz values */ + zl10353_single_write(fe, MCLK_RATIO, 0x97); + zl10353_single_write(fe, 0x64, 0x34); + zl10353_single_write(fe, 0xcc, 0xdd); + break; + case 7000000: + zl10353_single_write(fe, MCLK_RATIO, 0x86); + zl10353_single_write(fe, 0x64, 0x35); + zl10353_single_write(fe, 0xcc, 0x73); + break; + default: + c->bandwidth_hz = 8000000; + /* fall though */ + case 8000000: + zl10353_single_write(fe, MCLK_RATIO, 0x75); + zl10353_single_write(fe, 0x64, 0x36); + zl10353_single_write(fe, 0xcc, 0x73); + } + + zl10353_calc_nominal_rate(fe, c->bandwidth_hz, &nominal_rate); + zl10353_single_write(fe, TRL_NOMINAL_RATE_1, msb(nominal_rate)); + zl10353_single_write(fe, TRL_NOMINAL_RATE_0, lsb(nominal_rate)); + state->bandwidth = c->bandwidth_hz; + + zl10353_calc_input_freq(fe, &input_freq); + zl10353_single_write(fe, INPUT_FREQ_1, msb(input_freq)); + zl10353_single_write(fe, INPUT_FREQ_0, lsb(input_freq)); + + /* Hint at TPS settings */ + switch (c->code_rate_HP) { + case FEC_2_3: + tps |= (1 << 7); + break; + case FEC_3_4: + tps |= (2 << 7); + break; + case FEC_5_6: + tps |= (3 << 7); + break; + case FEC_7_8: + tps |= (4 << 7); + break; + case FEC_1_2: + case FEC_AUTO: + break; + default: + return -EINVAL; + } + + switch (c->code_rate_LP) { + case FEC_2_3: + tps |= (1 << 4); + break; + case FEC_3_4: + tps |= (2 << 4); + break; + case FEC_5_6: + tps |= (3 << 4); + break; + case FEC_7_8: + tps |= (4 << 4); + break; + case FEC_1_2: + case FEC_AUTO: + break; + case FEC_NONE: + if (c->hierarchy == HIERARCHY_AUTO || + c->hierarchy == HIERARCHY_NONE) + break; + default: + return -EINVAL; + } + + switch (c->modulation) { + case QPSK: + break; + case QAM_AUTO: + case QAM_16: + tps |= (1 << 13); + break; + case QAM_64: + tps |= (2 << 13); + break; + default: + return -EINVAL; + } + + switch (c->transmission_mode) { + case TRANSMISSION_MODE_2K: + case TRANSMISSION_MODE_AUTO: + break; + case TRANSMISSION_MODE_8K: + tps |= (1 << 0); + break; + default: + return -EINVAL; + } + + switch (c->guard_interval) { + case GUARD_INTERVAL_1_32: + case GUARD_INTERVAL_AUTO: + break; + case GUARD_INTERVAL_1_16: + tps |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + tps |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + tps |= (3 << 2); + break; + default: + return -EINVAL; + } + + switch (c->hierarchy) { + case HIERARCHY_AUTO: + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + tps |= (1 << 10); + break; + case HIERARCHY_2: + tps |= (2 << 10); + break; + case HIERARCHY_4: + tps |= (3 << 10); + break; + default: + return -EINVAL; + } + + zl10353_single_write(fe, TPS_GIVEN_1, msb(tps)); + zl10353_single_write(fe, TPS_GIVEN_0, lsb(tps)); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + /* + * If there is no tuner attached to the secondary I2C bus, we call + * set_params to program a potential tuner attached somewhere else. + * Otherwise, we update the PLL registers via calc_regs. + */ + if (state->config.no_tuner) { + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + } else if (fe->ops.tuner_ops.calc_regs) { + fe->ops.tuner_ops.calc_regs(fe, pllbuf + 1, 5); + pllbuf[1] <<= 1; + zl10353_write(fe, pllbuf, sizeof(pllbuf)); + } + + zl10353_single_write(fe, 0x5F, 0x13); + + /* If no attached tuner or invalid PLL registers, just start the FSM. */ + if (state->config.no_tuner || fe->ops.tuner_ops.calc_regs == NULL) + zl10353_single_write(fe, FSM_GO, 0x01); + else + zl10353_single_write(fe, TUNER_GO, 0x01); + + return 0; +} + +static int zl10353_get_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct zl10353_state *state = fe->demodulator_priv; + int s6, s9; + u16 tps; + static const u8 tps_fec_to_api[8] = { + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_5_6, + FEC_7_8, + FEC_AUTO, + FEC_AUTO, + FEC_AUTO + }; + + s6 = zl10353_read_register(state, STATUS_6); + s9 = zl10353_read_register(state, STATUS_9); + if (s6 < 0 || s9 < 0) + return -EREMOTEIO; + if ((s6 & (1 << 5)) == 0 || (s9 & (1 << 4)) == 0) + return -EINVAL; /* no FE or TPS lock */ + + tps = zl10353_read_register(state, TPS_RECEIVED_1) << 8 | + zl10353_read_register(state, TPS_RECEIVED_0); + + c->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7]; + c->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7]; + + switch ((tps >> 13) & 3) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + default: + c->modulation = QAM_AUTO; + break; + } + + c->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : + TRANSMISSION_MODE_2K; + + switch ((tps >> 2) & 3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + default: + c->guard_interval = GUARD_INTERVAL_AUTO; + break; + } + + switch ((tps >> 10) & 7) { + case 0: + c->hierarchy = HIERARCHY_NONE; + break; + case 1: + c->hierarchy = HIERARCHY_1; + break; + case 2: + c->hierarchy = HIERARCHY_2; + break; + case 3: + c->hierarchy = HIERARCHY_4; + break; + default: + c->hierarchy = HIERARCHY_AUTO; + break; + } + + c->frequency = state->frequency; + c->bandwidth_hz = state->bandwidth; + c->inversion = INVERSION_AUTO; + + return 0; +} + +static int zl10353_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct zl10353_state *state = fe->demodulator_priv; + int s6, s7, s8; + + if ((s6 = zl10353_read_register(state, STATUS_6)) < 0) + return -EREMOTEIO; + if ((s7 = zl10353_read_register(state, STATUS_7)) < 0) + return -EREMOTEIO; + if ((s8 = zl10353_read_register(state, STATUS_8)) < 0) + return -EREMOTEIO; + + *status = 0; + if (s6 & (1 << 2)) + *status |= FE_HAS_CARRIER; + if (s6 & (1 << 1)) + *status |= FE_HAS_VITERBI; + if (s6 & (1 << 5)) + *status |= FE_HAS_LOCK; + if (s7 & (1 << 4)) + *status |= FE_HAS_SYNC; + if (s8 & (1 << 6)) + *status |= FE_HAS_SIGNAL; + + if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != + (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) + *status &= ~FE_HAS_LOCK; + + return 0; +} + +static int zl10353_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct zl10353_state *state = fe->demodulator_priv; + + *ber = zl10353_read_register(state, RS_ERR_CNT_2) << 16 | + zl10353_read_register(state, RS_ERR_CNT_1) << 8 | + zl10353_read_register(state, RS_ERR_CNT_0); + + return 0; +} + +static int zl10353_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct zl10353_state *state = fe->demodulator_priv; + + u16 signal = zl10353_read_register(state, AGC_GAIN_1) << 10 | + zl10353_read_register(state, AGC_GAIN_0) << 2 | 3; + + *strength = ~signal; + + return 0; +} + +static int zl10353_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct zl10353_state *state = fe->demodulator_priv; + u8 _snr; + + if (debug_regs) + zl10353_dump_regs(fe); + + _snr = zl10353_read_register(state, SNR); + *snr = 10 * _snr / 8; + + return 0; +} + +static int zl10353_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct zl10353_state *state = fe->demodulator_priv; + u32 ubl = 0; + + ubl = zl10353_read_register(state, RS_UBC_1) << 8 | + zl10353_read_register(state, RS_UBC_0); + + state->ucblocks += ubl; + *ucblocks = state->ucblocks; + + return 0; +} + +static int zl10353_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings + *fe_tune_settings) +{ + fe_tune_settings->min_delay_ms = 1000; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + + return 0; +} + +static int zl10353_init(struct dvb_frontend *fe) +{ + struct zl10353_state *state = fe->demodulator_priv; + u8 zl10353_reset_attach[6] = { 0x50, 0x03, 0x64, 0x46, 0x15, 0x0F }; + + if (debug_regs) + zl10353_dump_regs(fe); + if (state->config.parallel_ts) + zl10353_reset_attach[2] &= ~0x20; + if (state->config.clock_ctl_1) + zl10353_reset_attach[3] = state->config.clock_ctl_1; + if (state->config.pll_0) + zl10353_reset_attach[4] = state->config.pll_0; + + /* Do a "hard" reset if not already done */ + if (zl10353_read_register(state, 0x50) != zl10353_reset_attach[1] || + zl10353_read_register(state, 0x51) != zl10353_reset_attach[2]) { + zl10353_write(fe, zl10353_reset_attach, + sizeof(zl10353_reset_attach)); + if (debug_regs) + zl10353_dump_regs(fe); + } + + return 0; +} + +static int zl10353_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct zl10353_state *state = fe->demodulator_priv; + u8 val = 0x0a; + + if (state->config.disable_i2c_gate_ctrl) { + /* No tuner attached to the internal I2C bus */ + /* If set enable I2C bridge, the main I2C bus stopped hardly */ + return 0; + } + + if (enable) + val |= 0x10; + + return zl10353_single_write(fe, 0x62, val); +} + +static void zl10353_release(struct dvb_frontend *fe) +{ + struct zl10353_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops zl10353_ops; + +struct dvb_frontend *zl10353_attach(const struct zl10353_config *config, + struct i2c_adapter *i2c) +{ + struct zl10353_state *state = NULL; + int id; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct zl10353_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = i2c; + memcpy(&state->config, config, sizeof(struct zl10353_config)); + + /* check if the demod is there */ + id = zl10353_read_register(state, CHIP_ID); + if ((id != ID_ZL10353) && (id != ID_CE6230) && (id != ID_CE6231)) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &zl10353_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops zl10353_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Zarlink ZL10353 DVB-T", + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 166667, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = zl10353_release, + + .init = zl10353_init, + .sleep = zl10353_sleep, + .i2c_gate_ctrl = zl10353_i2c_gate_ctrl, + .write = zl10353_write, + + .set_frontend = zl10353_set_parameters, + .get_frontend = zl10353_get_parameters, + .get_tune_settings = zl10353_get_tune_settings, + + .read_status = zl10353_read_status, + .read_ber = zl10353_read_ber, + .read_signal_strength = zl10353_read_signal_strength, + .read_snr = zl10353_read_snr, + .read_ucblocks = zl10353_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +module_param(debug_regs, int, 0644); +MODULE_PARM_DESC(debug_regs, "Turn on/off frontend register dumps (default:off)."); + +MODULE_DESCRIPTION("Zarlink ZL10353 DVB-T demodulator driver"); +MODULE_AUTHOR("Chris Pascoe"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(zl10353_attach); diff --git a/drivers/media/dvb-frontends/zl10353.h b/drivers/media/dvb-frontends/zl10353.h new file mode 100644 index 00000000..50c1004a --- /dev/null +++ b/drivers/media/dvb-frontends/zl10353.h @@ -0,0 +1,62 @@ +/* + * Driver for Zarlink DVB-T ZL10353 demodulator + * + * Copyright (C) 2006, 2007 Christopher Pascoe + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef ZL10353_H +#define ZL10353_H + +#include + +struct zl10353_config +{ + /* demodulator's I2C address */ + u8 demod_address; + + /* frequencies in units of 0.1kHz */ + int adc_clock; /* default: 450560 (45.056 MHz) */ + int if2; /* default: 361667 (36.1667 MHz) */ + + /* set if no pll is connected to the secondary i2c bus */ + int no_tuner; + + /* set if parallel ts output is required */ + int parallel_ts; + + /* set if i2c_gate_ctrl disable is required */ + u8 disable_i2c_gate_ctrl:1; + + /* clock control registers (0x51-0x54) */ + u8 clock_ctl_1; /* default: 0x46 */ + u8 pll_0; /* default: 0x15 */ +}; + +#if IS_ENABLED(CONFIG_DVB_ZL10353) +extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend* zl10353_attach(const struct zl10353_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_ZL10353 */ + +#endif /* ZL10353_H */ diff --git a/drivers/media/dvb-frontends/zl10353_priv.h b/drivers/media/dvb-frontends/zl10353_priv.h new file mode 100644 index 00000000..e0dd1d3e --- /dev/null +++ b/drivers/media/dvb-frontends/zl10353_priv.h @@ -0,0 +1,79 @@ +/* + * Driver for Zarlink DVB-T ZL10353 demodulator + * + * Copyright (C) 2006, 2007 Christopher Pascoe + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ZL10353_PRIV_ +#define _ZL10353_PRIV_ + +#define ID_ZL10353 0x14 /* Zarlink ZL10353 */ +#define ID_CE6230 0x18 /* Intel CE6230 */ +#define ID_CE6231 0x19 /* Intel CE6231 */ + +#define msb(x) (((x) >> 8) & 0xff) +#define lsb(x) ((x) & 0xff) + +enum zl10353_reg_addr { + INTERRUPT_0 = 0x00, + INTERRUPT_1 = 0x01, + INTERRUPT_2 = 0x02, + INTERRUPT_3 = 0x03, + INTERRUPT_4 = 0x04, + INTERRUPT_5 = 0x05, + STATUS_6 = 0x06, + STATUS_7 = 0x07, + STATUS_8 = 0x08, + STATUS_9 = 0x09, + AGC_GAIN_1 = 0x0A, + AGC_GAIN_0 = 0x0B, + SNR = 0x10, + RS_ERR_CNT_2 = 0x11, + RS_ERR_CNT_1 = 0x12, + RS_ERR_CNT_0 = 0x13, + RS_UBC_1 = 0x14, + RS_UBC_0 = 0x15, + TPS_RECEIVED_1 = 0x1D, + TPS_RECEIVED_0 = 0x1E, + TPS_CURRENT_1 = 0x1F, + TPS_CURRENT_0 = 0x20, + CLOCK_CTL_0 = 0x51, + CLOCK_CTL_1 = 0x52, + PLL_0 = 0x53, + PLL_1 = 0x54, + RESET = 0x55, + AGC_TARGET = 0x56, + MCLK_RATIO = 0x5C, + ACQ_CTL = 0x5E, + TRL_NOMINAL_RATE_1 = 0x65, + TRL_NOMINAL_RATE_0 = 0x66, + INPUT_FREQ_1 = 0x6C, + INPUT_FREQ_0 = 0x6D, + TPS_GIVEN_1 = 0x6E, + TPS_GIVEN_0 = 0x6F, + TUNER_GO = 0x70, + FSM_GO = 0x71, + CHIP_ID = 0x7F, + CHAN_STEP_1 = 0xE4, + CHAN_STEP_0 = 0xE5, + OFDM_LOCK_TIME = 0xE7, + FEC_LOCK_TIME = 0xE8, + ACQ_DELAY = 0xE9, +}; + +#endif /* _ZL10353_PRIV_ */ diff --git a/drivers/media/firewire/Kconfig b/drivers/media/firewire/Kconfig new file mode 100644 index 00000000..f3e9448c --- /dev/null +++ b/drivers/media/firewire/Kconfig @@ -0,0 +1,19 @@ +config DVB_FIREDTV + tristate "FireDTV and FloppyDTV" + depends on DVB_CORE && FIREWIRE + help + Support for DVB receivers from Digital Everywhere + which are connected via IEEE 1394 (FireWire). + + These devices don't have an MPEG decoder built in, + so you need an external software decoder to watch TV. + + To compile this driver as a module, say M here: + the module will be called firedtv. + +if DVB_FIREDTV + +config DVB_FIREDTV_INPUT + def_bool INPUT = y || (INPUT = m && DVB_FIREDTV = m) + +endif # DVB_FIREDTV diff --git a/drivers/media/firewire/Makefile b/drivers/media/firewire/Makefile new file mode 100644 index 00000000..23948134 --- /dev/null +++ b/drivers/media/firewire/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_DVB_FIREDTV) += firedtv.o + +firedtv-y += firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o firedtv-fw.o +firedtv-$(CONFIG_DVB_FIREDTV_INPUT) += firedtv-rc.o + +ccflags-y += -Idrivers/media/dvb-core diff --git a/drivers/media/firewire/firedtv-avc.c b/drivers/media/firewire/firedtv-avc.c new file mode 100644 index 00000000..d1a1a132 --- /dev/null +++ b/drivers/media/firewire/firedtv-avc.c @@ -0,0 +1,1457 @@ +/* + * FireDTV driver (formerly known as FireSAT) + * + * Copyright (C) 2004 Andreas Monitzer + * Copyright (C) 2008 Ben Backx + * Copyright (C) 2008 Henrik Kurelid + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "firedtv.h" + +#define FCP_COMMAND_REGISTER 0xfffff0000b00ULL + +#define AVC_CTYPE_CONTROL 0x0 +#define AVC_CTYPE_STATUS 0x1 +#define AVC_CTYPE_NOTIFY 0x3 + +#define AVC_RESPONSE_ACCEPTED 0x9 +#define AVC_RESPONSE_STABLE 0xc +#define AVC_RESPONSE_CHANGED 0xd +#define AVC_RESPONSE_INTERIM 0xf + +#define AVC_SUBUNIT_TYPE_TUNER (0x05 << 3) +#define AVC_SUBUNIT_TYPE_UNIT (0x1f << 3) + +#define AVC_OPCODE_VENDOR 0x00 +#define AVC_OPCODE_READ_DESCRIPTOR 0x09 +#define AVC_OPCODE_DSIT 0xc8 +#define AVC_OPCODE_DSD 0xcb + +#define DESCRIPTOR_TUNER_STATUS 0x80 +#define DESCRIPTOR_SUBUNIT_IDENTIFIER 0x00 + +#define SFE_VENDOR_DE_COMPANYID_0 0x00 /* OUI of Digital Everywhere */ +#define SFE_VENDOR_DE_COMPANYID_1 0x12 +#define SFE_VENDOR_DE_COMPANYID_2 0x87 + +#define SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL 0x0a +#define SFE_VENDOR_OPCODE_LNB_CONTROL 0x52 +#define SFE_VENDOR_OPCODE_TUNE_QPSK 0x58 /* for DVB-S */ + +#define SFE_VENDOR_OPCODE_GET_FIRMWARE_VERSION 0x00 +#define SFE_VENDOR_OPCODE_HOST2CA 0x56 +#define SFE_VENDOR_OPCODE_CA2HOST 0x57 +#define SFE_VENDOR_OPCODE_CISTATUS 0x59 +#define SFE_VENDOR_OPCODE_TUNE_QPSK2 0x60 /* for DVB-S2 */ + +#define SFE_VENDOR_TAG_CA_RESET 0x00 +#define SFE_VENDOR_TAG_CA_APPLICATION_INFO 0x01 +#define SFE_VENDOR_TAG_CA_PMT 0x02 +#define SFE_VENDOR_TAG_CA_DATE_TIME 0x04 +#define SFE_VENDOR_TAG_CA_MMI 0x05 +#define SFE_VENDOR_TAG_CA_ENTER_MENU 0x07 + +#define EN50221_LIST_MANAGEMENT_ONLY 0x03 +#define EN50221_TAG_APP_INFO 0x9f8021 +#define EN50221_TAG_CA_INFO 0x9f8031 + +struct avc_command_frame { + u8 ctype; + u8 subunit; + u8 opcode; + u8 operand[509]; +}; + +struct avc_response_frame { + u8 response; + u8 subunit; + u8 opcode; + u8 operand[509]; +}; + +#define LAST_OPERAND (509 - 1) + +static inline void clear_operands(struct avc_command_frame *c, int from, int to) +{ + memset(&c->operand[from], 0, to - from + 1); +} + +static void pad_operands(struct avc_command_frame *c, int from) +{ + int to = ALIGN(from, 4); + + if (from <= to && to <= LAST_OPERAND) + clear_operands(c, from, to); +} + +#define AVC_DEBUG_READ_DESCRIPTOR 0x0001 +#define AVC_DEBUG_DSIT 0x0002 +#define AVC_DEBUG_DSD 0x0004 +#define AVC_DEBUG_REGISTER_REMOTE_CONTROL 0x0008 +#define AVC_DEBUG_LNB_CONTROL 0x0010 +#define AVC_DEBUG_TUNE_QPSK 0x0020 +#define AVC_DEBUG_TUNE_QPSK2 0x0040 +#define AVC_DEBUG_HOST2CA 0x0080 +#define AVC_DEBUG_CA2HOST 0x0100 +#define AVC_DEBUG_APPLICATION_PMT 0x4000 +#define AVC_DEBUG_FCP_PAYLOADS 0x8000 + +static int avc_debug; +module_param_named(debug, avc_debug, int, 0644); +MODULE_PARM_DESC(debug, "Verbose logging (none = 0" + ", FCP subactions" + ": READ DESCRIPTOR = " __stringify(AVC_DEBUG_READ_DESCRIPTOR) + ", DSIT = " __stringify(AVC_DEBUG_DSIT) + ", REGISTER_REMOTE_CONTROL = " __stringify(AVC_DEBUG_REGISTER_REMOTE_CONTROL) + ", LNB CONTROL = " __stringify(AVC_DEBUG_LNB_CONTROL) + ", TUNE QPSK = " __stringify(AVC_DEBUG_TUNE_QPSK) + ", TUNE QPSK2 = " __stringify(AVC_DEBUG_TUNE_QPSK2) + ", HOST2CA = " __stringify(AVC_DEBUG_HOST2CA) + ", CA2HOST = " __stringify(AVC_DEBUG_CA2HOST) + "; Application sent PMT = " __stringify(AVC_DEBUG_APPLICATION_PMT) + ", FCP payloads = " __stringify(AVC_DEBUG_FCP_PAYLOADS) + ", or a combination, or all = -1)"); + +/* + * This is a workaround since there is no vendor specific command to retrieve + * ca_info using AVC. If this parameter is not used, ca_system_id will be + * filled with application_manufacturer from ca_app_info. + * Digital Everywhere have said that adding ca_info is on their TODO list. + */ +static unsigned int num_fake_ca_system_ids; +static int fake_ca_system_ids[4] = { -1, -1, -1, -1 }; +module_param_array(fake_ca_system_ids, int, &num_fake_ca_system_ids, 0644); +MODULE_PARM_DESC(fake_ca_system_ids, "If your CAM application manufacturer " + "does not have the same ca_system_id as your CAS, you can " + "override what ca_system_ids are presented to the " + "application by setting this field to an array of ids."); + +static const char *debug_fcp_ctype(unsigned int ctype) +{ + static const char *ctypes[] = { + [0x0] = "CONTROL", [0x1] = "STATUS", + [0x2] = "SPECIFIC INQUIRY", [0x3] = "NOTIFY", + [0x4] = "GENERAL INQUIRY", [0x8] = "NOT IMPLEMENTED", + [0x9] = "ACCEPTED", [0xa] = "REJECTED", + [0xb] = "IN TRANSITION", [0xc] = "IMPLEMENTED/STABLE", + [0xd] = "CHANGED", [0xf] = "INTERIM", + }; + const char *ret = ctype < ARRAY_SIZE(ctypes) ? ctypes[ctype] : NULL; + + return ret ? ret : "?"; +} + +static const char *debug_fcp_opcode(unsigned int opcode, + const u8 *data, int length) +{ + switch (opcode) { + case AVC_OPCODE_VENDOR: + break; + case AVC_OPCODE_READ_DESCRIPTOR: + return avc_debug & AVC_DEBUG_READ_DESCRIPTOR ? + "ReadDescriptor" : NULL; + case AVC_OPCODE_DSIT: + return avc_debug & AVC_DEBUG_DSIT ? + "DirectSelectInfo.Type" : NULL; + case AVC_OPCODE_DSD: + return avc_debug & AVC_DEBUG_DSD ? "DirectSelectData" : NULL; + default: + return "Unknown"; + } + + if (length < 7 || + data[3] != SFE_VENDOR_DE_COMPANYID_0 || + data[4] != SFE_VENDOR_DE_COMPANYID_1 || + data[5] != SFE_VENDOR_DE_COMPANYID_2) + return "Vendor/Unknown"; + + switch (data[6]) { + case SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL: + return avc_debug & AVC_DEBUG_REGISTER_REMOTE_CONTROL ? + "RegisterRC" : NULL; + case SFE_VENDOR_OPCODE_LNB_CONTROL: + return avc_debug & AVC_DEBUG_LNB_CONTROL ? "LNBControl" : NULL; + case SFE_VENDOR_OPCODE_TUNE_QPSK: + return avc_debug & AVC_DEBUG_TUNE_QPSK ? "TuneQPSK" : NULL; + case SFE_VENDOR_OPCODE_TUNE_QPSK2: + return avc_debug & AVC_DEBUG_TUNE_QPSK2 ? "TuneQPSK2" : NULL; + case SFE_VENDOR_OPCODE_HOST2CA: + return avc_debug & AVC_DEBUG_HOST2CA ? "Host2CA" : NULL; + case SFE_VENDOR_OPCODE_CA2HOST: + return avc_debug & AVC_DEBUG_CA2HOST ? "CA2Host" : NULL; + } + return "Vendor/Unknown"; +} + +static void debug_fcp(const u8 *data, int length) +{ + unsigned int subunit_type, subunit_id, opcode; + const char *op, *prefix; + + prefix = data[0] > 7 ? "FCP <- " : "FCP -> "; + subunit_type = data[1] >> 3; + subunit_id = data[1] & 7; + opcode = subunit_type == 0x1e || subunit_id == 5 ? ~0 : data[2]; + op = debug_fcp_opcode(opcode, data, length); + + if (op) { + printk(KERN_INFO "%ssu=%x.%x l=%d: %-8s - %s\n", + prefix, subunit_type, subunit_id, length, + debug_fcp_ctype(data[0]), op); + if (avc_debug & AVC_DEBUG_FCP_PAYLOADS) + print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_NONE, + 16, 1, data, length, false); + } +} + +static void debug_pmt(char *msg, int length) +{ + printk(KERN_INFO "APP PMT -> l=%d\n", length); + print_hex_dump(KERN_INFO, "APP PMT -> ", DUMP_PREFIX_NONE, + 16, 1, msg, length, false); +} + +static int avc_write(struct firedtv *fdtv) +{ + int err, retry; + + fdtv->avc_reply_received = false; + + for (retry = 0; retry < 6; retry++) { + if (unlikely(avc_debug)) + debug_fcp(fdtv->avc_data, fdtv->avc_data_length); + + err = fdtv_write(fdtv, FCP_COMMAND_REGISTER, + fdtv->avc_data, fdtv->avc_data_length); + if (err) { + dev_err(fdtv->device, "FCP command write failed\n"); + + return err; + } + + /* + * AV/C specs say that answers should be sent within 150 ms. + * Time out after 200 ms. + */ + if (wait_event_timeout(fdtv->avc_wait, + fdtv->avc_reply_received, + msecs_to_jiffies(200)) != 0) + return 0; + } + dev_err(fdtv->device, "FCP response timed out\n"); + + return -ETIMEDOUT; +} + +static bool is_register_rc(struct avc_response_frame *r) +{ + return r->opcode == AVC_OPCODE_VENDOR && + r->operand[0] == SFE_VENDOR_DE_COMPANYID_0 && + r->operand[1] == SFE_VENDOR_DE_COMPANYID_1 && + r->operand[2] == SFE_VENDOR_DE_COMPANYID_2 && + r->operand[3] == SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL; +} + +int avc_recv(struct firedtv *fdtv, void *data, size_t length) +{ + struct avc_response_frame *r = data; + + if (unlikely(avc_debug)) + debug_fcp(data, length); + + if (length >= 8 && is_register_rc(r)) { + switch (r->response) { + case AVC_RESPONSE_CHANGED: + fdtv_handle_rc(fdtv, r->operand[4] << 8 | r->operand[5]); + schedule_work(&fdtv->remote_ctrl_work); + break; + case AVC_RESPONSE_INTERIM: + if (is_register_rc((void *)fdtv->avc_data)) + goto wake; + break; + default: + dev_info(fdtv->device, + "remote control result = %d\n", r->response); + } + return 0; + } + + if (fdtv->avc_reply_received) { + dev_err(fdtv->device, "out-of-order AVC response, ignored\n"); + return -EIO; + } + + memcpy(fdtv->avc_data, data, length); + fdtv->avc_data_length = length; +wake: + fdtv->avc_reply_received = true; + wake_up(&fdtv->avc_wait); + + return 0; +} + +static int add_pid_filter(struct firedtv *fdtv, u8 *operand) +{ + int i, n, pos = 1; + + for (i = 0, n = 0; i < 16; i++) { + if (test_bit(i, &fdtv->channel_active)) { + operand[pos++] = 0x13; /* flowfunction relay */ + operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */ + operand[pos++] = (fdtv->channel_pid[i] >> 8) & 0x1f; + operand[pos++] = fdtv->channel_pid[i] & 0xff; + operand[pos++] = 0x00; /* tableID */ + operand[pos++] = 0x00; /* filter_length */ + n++; + } + } + operand[0] = n; + + return pos; +} + +/* + * tuning command for setting the relative LNB frequency + * (not supported by the AVC standard) + */ +static int avc_tuner_tuneqpsk(struct firedtv *fdtv, + struct dtv_frontend_properties *p) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + if (fdtv->type == FIREDTV_DVB_S2) + c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK2; + else + c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK; + + c->operand[4] = (p->frequency >> 24) & 0xff; + c->operand[5] = (p->frequency >> 16) & 0xff; + c->operand[6] = (p->frequency >> 8) & 0xff; + c->operand[7] = p->frequency & 0xff; + + c->operand[8] = ((p->symbol_rate / 1000) >> 8) & 0xff; + c->operand[9] = (p->symbol_rate / 1000) & 0xff; + + switch (p->fec_inner) { + case FEC_1_2: c->operand[10] = 0x1; break; + case FEC_2_3: c->operand[10] = 0x2; break; + case FEC_3_4: c->operand[10] = 0x3; break; + case FEC_5_6: c->operand[10] = 0x4; break; + case FEC_7_8: c->operand[10] = 0x5; break; + case FEC_4_5: + case FEC_8_9: + case FEC_AUTO: + default: c->operand[10] = 0x0; + } + + if (fdtv->voltage == 0xff) + c->operand[11] = 0xff; + else if (fdtv->voltage == SEC_VOLTAGE_18) /* polarisation */ + c->operand[11] = 0; + else + c->operand[11] = 1; + + if (fdtv->tone == 0xff) + c->operand[12] = 0xff; + else if (fdtv->tone == SEC_TONE_ON) /* band */ + c->operand[12] = 1; + else + c->operand[12] = 0; + + if (fdtv->type == FIREDTV_DVB_S2) { + if (fdtv->fe.dtv_property_cache.delivery_system == SYS_DVBS2) { + switch (fdtv->fe.dtv_property_cache.modulation) { + case QAM_16: c->operand[13] = 0x1; break; + case QPSK: c->operand[13] = 0x2; break; + case PSK_8: c->operand[13] = 0x3; break; + default: c->operand[13] = 0x2; break; + } + switch (fdtv->fe.dtv_property_cache.rolloff) { + case ROLLOFF_35: c->operand[14] = 0x2; break; + case ROLLOFF_20: c->operand[14] = 0x0; break; + case ROLLOFF_25: c->operand[14] = 0x1; break; + case ROLLOFF_AUTO: + default: c->operand[14] = 0x2; break; + /* case ROLLOFF_NONE: c->operand[14] = 0xff; break; */ + } + switch (fdtv->fe.dtv_property_cache.pilot) { + case PILOT_AUTO: c->operand[15] = 0x0; break; + case PILOT_OFF: c->operand[15] = 0x0; break; + case PILOT_ON: c->operand[15] = 0x1; break; + } + } else { + c->operand[13] = 0x1; /* auto modulation */ + c->operand[14] = 0xff; /* disable rolloff */ + c->operand[15] = 0xff; /* disable pilot */ + } + return 16; + } else { + return 13; + } +} + +static int avc_tuner_dsd_dvb_c(struct firedtv *fdtv, + struct dtv_frontend_properties *p) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + + c->opcode = AVC_OPCODE_DSD; + + c->operand[0] = 0; /* source plug */ + c->operand[1] = 0xd2; /* subfunction replace */ + c->operand[2] = 0x20; /* system id = DVB */ + c->operand[3] = 0x00; /* antenna number */ + c->operand[4] = 0x11; /* system_specific_multiplex selection_length */ + + /* multiplex_valid_flags, high byte */ + c->operand[5] = 0 << 7 /* reserved */ + | 0 << 6 /* Polarisation */ + | 0 << 5 /* Orbital_Pos */ + | 1 << 4 /* Frequency */ + | 1 << 3 /* Symbol_Rate */ + | 0 << 2 /* FEC_outer */ + | (p->fec_inner != FEC_AUTO ? 1 << 1 : 0) + | (p->modulation != QAM_AUTO ? 1 << 0 : 0); + + /* multiplex_valid_flags, low byte */ + c->operand[6] = 0 << 7 /* NetworkID */ + | 0 << 0 /* reserved */ ; + + c->operand[7] = 0x00; + c->operand[8] = 0x00; + c->operand[9] = 0x00; + c->operand[10] = 0x00; + + c->operand[11] = (((p->frequency / 4000) >> 16) & 0xff) | (2 << 6); + c->operand[12] = ((p->frequency / 4000) >> 8) & 0xff; + c->operand[13] = (p->frequency / 4000) & 0xff; + c->operand[14] = ((p->symbol_rate / 1000) >> 12) & 0xff; + c->operand[15] = ((p->symbol_rate / 1000) >> 4) & 0xff; + c->operand[16] = ((p->symbol_rate / 1000) << 4) & 0xf0; + c->operand[17] = 0x00; + + switch (p->fec_inner) { + case FEC_1_2: c->operand[18] = 0x1; break; + case FEC_2_3: c->operand[18] = 0x2; break; + case FEC_3_4: c->operand[18] = 0x3; break; + case FEC_5_6: c->operand[18] = 0x4; break; + case FEC_7_8: c->operand[18] = 0x5; break; + case FEC_8_9: c->operand[18] = 0x6; break; + case FEC_4_5: c->operand[18] = 0x8; break; + case FEC_AUTO: + default: c->operand[18] = 0x0; + } + + switch (p->modulation) { + case QAM_16: c->operand[19] = 0x08; break; + case QAM_32: c->operand[19] = 0x10; break; + case QAM_64: c->operand[19] = 0x18; break; + case QAM_128: c->operand[19] = 0x20; break; + case QAM_256: c->operand[19] = 0x28; break; + case QAM_AUTO: + default: c->operand[19] = 0x00; + } + + c->operand[20] = 0x00; + c->operand[21] = 0x00; + + return 22 + add_pid_filter(fdtv, &c->operand[22]); +} + +static int avc_tuner_dsd_dvb_t(struct firedtv *fdtv, + struct dtv_frontend_properties *p) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + + c->opcode = AVC_OPCODE_DSD; + + c->operand[0] = 0; /* source plug */ + c->operand[1] = 0xd2; /* subfunction replace */ + c->operand[2] = 0x20; /* system id = DVB */ + c->operand[3] = 0x00; /* antenna number */ + c->operand[4] = 0x0c; /* system_specific_multiplex selection_length */ + + /* multiplex_valid_flags, high byte */ + c->operand[5] = + 0 << 7 /* reserved */ + | 1 << 6 /* CenterFrequency */ + | (p->bandwidth_hz != 0 ? 1 << 5 : 0) + | (p->modulation != QAM_AUTO ? 1 << 4 : 0) + | (p->hierarchy != HIERARCHY_AUTO ? 1 << 3 : 0) + | (p->code_rate_HP != FEC_AUTO ? 1 << 2 : 0) + | (p->code_rate_LP != FEC_AUTO ? 1 << 1 : 0) + | (p->guard_interval != GUARD_INTERVAL_AUTO ? 1 << 0 : 0); + + /* multiplex_valid_flags, low byte */ + c->operand[6] = + 0 << 7 /* NetworkID */ + | (p->transmission_mode != TRANSMISSION_MODE_AUTO ? 1 << 6 : 0) + | 0 << 5 /* OtherFrequencyFlag */ + | 0 << 0 /* reserved */ ; + + c->operand[7] = 0x0; + c->operand[8] = (p->frequency / 10) >> 24; + c->operand[9] = ((p->frequency / 10) >> 16) & 0xff; + c->operand[10] = ((p->frequency / 10) >> 8) & 0xff; + c->operand[11] = (p->frequency / 10) & 0xff; + + switch (p->bandwidth_hz) { + case 7000000: c->operand[12] = 0x20; break; + case 8000000: + case 6000000: /* not defined by AVC spec */ + case 0: + default: c->operand[12] = 0x00; + } + + switch (p->modulation) { + case QAM_16: c->operand[13] = 1 << 6; break; + case QAM_64: c->operand[13] = 2 << 6; break; + case QPSK: + default: c->operand[13] = 0x00; + } + + switch (p->hierarchy) { + case HIERARCHY_1: c->operand[13] |= 1 << 3; break; + case HIERARCHY_2: c->operand[13] |= 2 << 3; break; + case HIERARCHY_4: c->operand[13] |= 3 << 3; break; + case HIERARCHY_AUTO: + case HIERARCHY_NONE: + default: break; + } + + switch (p->code_rate_HP) { + case FEC_2_3: c->operand[13] |= 1; break; + case FEC_3_4: c->operand[13] |= 2; break; + case FEC_5_6: c->operand[13] |= 3; break; + case FEC_7_8: c->operand[13] |= 4; break; + case FEC_1_2: + default: break; + } + + switch (p->code_rate_LP) { + case FEC_2_3: c->operand[14] = 1 << 5; break; + case FEC_3_4: c->operand[14] = 2 << 5; break; + case FEC_5_6: c->operand[14] = 3 << 5; break; + case FEC_7_8: c->operand[14] = 4 << 5; break; + case FEC_1_2: + default: c->operand[14] = 0x00; break; + } + + switch (p->guard_interval) { + case GUARD_INTERVAL_1_16: c->operand[14] |= 1 << 3; break; + case GUARD_INTERVAL_1_8: c->operand[14] |= 2 << 3; break; + case GUARD_INTERVAL_1_4: c->operand[14] |= 3 << 3; break; + case GUARD_INTERVAL_1_32: + case GUARD_INTERVAL_AUTO: + default: break; + } + + switch (p->transmission_mode) { + case TRANSMISSION_MODE_8K: c->operand[14] |= 1 << 1; break; + case TRANSMISSION_MODE_2K: + case TRANSMISSION_MODE_AUTO: + default: break; + } + + c->operand[15] = 0x00; /* network_ID[0] */ + c->operand[16] = 0x00; /* network_ID[1] */ + + return 17 + add_pid_filter(fdtv, &c->operand[17]); +} + +int avc_tuner_dsd(struct firedtv *fdtv, + struct dtv_frontend_properties *p) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + int pos, ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + + switch (fdtv->type) { + case FIREDTV_DVB_S: + case FIREDTV_DVB_S2: pos = avc_tuner_tuneqpsk(fdtv, p); break; + case FIREDTV_DVB_C: pos = avc_tuner_dsd_dvb_c(fdtv, p); break; + case FIREDTV_DVB_T: pos = avc_tuner_dsd_dvb_t(fdtv, p); break; + default: + BUG(); + } + pad_operands(c, pos); + + fdtv->avc_data_length = ALIGN(3 + pos, 4); + ret = avc_write(fdtv); +#if 0 + /* + * FIXME: + * u8 *status was an out-parameter of avc_tuner_dsd, unused by caller. + * Check for AVC_RESPONSE_ACCEPTED here instead? + */ + if (status) + *status = r->operand[2]; +#endif + mutex_unlock(&fdtv->avc_mutex); + + if (ret == 0) + msleep(500); + + return ret; +} + +int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[]) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + int ret, pos, k; + + if (pidc > 16 && pidc != 0xff) + return -EINVAL; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_DSD; + + c->operand[0] = 0; /* source plug */ + c->operand[1] = 0xd2; /* subfunction replace */ + c->operand[2] = 0x20; /* system id = DVB */ + c->operand[3] = 0x00; /* antenna number */ + c->operand[4] = 0x00; /* system_specific_multiplex selection_length */ + c->operand[5] = pidc; /* Nr_of_dsd_sel_specs */ + + pos = 6; + if (pidc != 0xff) + for (k = 0; k < pidc; k++) { + c->operand[pos++] = 0x13; /* flowfunction relay */ + c->operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */ + c->operand[pos++] = (pid[k] >> 8) & 0x1f; + c->operand[pos++] = pid[k] & 0xff; + c->operand[pos++] = 0x00; /* tableID */ + c->operand[pos++] = 0x00; /* filter_length */ + } + pad_operands(c, pos); + + fdtv->avc_data_length = ALIGN(3 + pos, 4); + ret = avc_write(fdtv); + + /* FIXME: check response code? */ + + mutex_unlock(&fdtv->avc_mutex); + + if (ret == 0) + msleep(50); + + return ret; +} + +int avc_tuner_get_ts(struct firedtv *fdtv) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + int ret, sl; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_DSIT; + + sl = fdtv->type == FIREDTV_DVB_T ? 0x0c : 0x11; + + c->operand[0] = 0; /* source plug */ + c->operand[1] = 0xd2; /* subfunction replace */ + c->operand[2] = 0xff; /* status */ + c->operand[3] = 0x20; /* system id = DVB */ + c->operand[4] = 0x00; /* antenna number */ + c->operand[5] = 0x0; /* system_specific_search_flags */ + c->operand[6] = sl; /* system_specific_multiplex selection_length */ + /* + * operand[7]: valid_flags[0] + * operand[8]: valid_flags[1] + * operand[7 + sl]: nr_of_dsit_sel_specs (always 0) + */ + clear_operands(c, 7, 24); + + fdtv->avc_data_length = fdtv->type == FIREDTV_DVB_T ? 24 : 28; + ret = avc_write(fdtv); + + /* FIXME: check response code? */ + + mutex_unlock(&fdtv->avc_mutex); + + if (ret == 0) + msleep(250); + + return ret; +} + +int avc_identify_subunit(struct firedtv *fdtv) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + struct avc_response_frame *r = (void *)fdtv->avc_data; + int ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_READ_DESCRIPTOR; + + c->operand[0] = DESCRIPTOR_SUBUNIT_IDENTIFIER; + c->operand[1] = 0xff; + c->operand[2] = 0x00; + c->operand[3] = 0x00; /* length highbyte */ + c->operand[4] = 0x08; /* length lowbyte */ + c->operand[5] = 0x00; /* offset highbyte */ + c->operand[6] = 0x0d; /* offset lowbyte */ + clear_operands(c, 7, 8); /* padding */ + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + if (ret < 0) + goto out; + + if ((r->response != AVC_RESPONSE_STABLE && + r->response != AVC_RESPONSE_ACCEPTED) || + (r->operand[3] << 8) + r->operand[4] != 8) { + dev_err(fdtv->device, "cannot read subunit identifier\n"); + ret = -EINVAL; + } +out: + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +#define SIZEOF_ANTENNA_INPUT_INFO 22 + +int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + struct avc_response_frame *r = (void *)fdtv->avc_data; + int length, ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_READ_DESCRIPTOR; + + c->operand[0] = DESCRIPTOR_TUNER_STATUS; + c->operand[1] = 0xff; /* read_result_status */ + /* + * operand[2]: reserved + * operand[3]: SIZEOF_ANTENNA_INPUT_INFO >> 8 + * operand[4]: SIZEOF_ANTENNA_INPUT_INFO & 0xff + */ + clear_operands(c, 2, 31); + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + if (ret < 0) + goto out; + + if (r->response != AVC_RESPONSE_STABLE && + r->response != AVC_RESPONSE_ACCEPTED) { + dev_err(fdtv->device, "cannot read tuner status\n"); + ret = -EINVAL; + goto out; + } + + length = r->operand[9]; + if (r->operand[1] != 0x10 || length != SIZEOF_ANTENNA_INPUT_INFO) { + dev_err(fdtv->device, "got invalid tuner status\n"); + ret = -EINVAL; + goto out; + } + + stat->active_system = r->operand[10]; + stat->searching = r->operand[11] >> 7 & 1; + stat->moving = r->operand[11] >> 6 & 1; + stat->no_rf = r->operand[11] >> 5 & 1; + stat->input = r->operand[12] >> 7 & 1; + stat->selected_antenna = r->operand[12] & 0x7f; + stat->ber = r->operand[13] << 24 | + r->operand[14] << 16 | + r->operand[15] << 8 | + r->operand[16]; + stat->signal_strength = r->operand[17]; + stat->raster_frequency = r->operand[18] >> 6 & 2; + stat->rf_frequency = (r->operand[18] & 0x3f) << 16 | + r->operand[19] << 8 | + r->operand[20]; + stat->man_dep_info_length = r->operand[21]; + stat->front_end_error = r->operand[22] >> 4 & 1; + stat->antenna_error = r->operand[22] >> 3 & 1; + stat->front_end_power_status = r->operand[22] >> 1 & 1; + stat->power_supply = r->operand[22] & 1; + stat->carrier_noise_ratio = r->operand[23] << 8 | + r->operand[24]; + stat->power_supply_voltage = r->operand[27]; + stat->antenna_voltage = r->operand[28]; + stat->firewire_bus_voltage = r->operand[29]; + stat->ca_mmi = r->operand[30] & 1; + stat->ca_pmt_reply = r->operand[31] >> 7 & 1; + stat->ca_date_time_request = r->operand[31] >> 6 & 1; + stat->ca_application_info = r->operand[31] >> 5 & 1; + stat->ca_module_present_status = r->operand[31] >> 4 & 1; + stat->ca_dvb_flag = r->operand[31] >> 3 & 1; + stat->ca_error_flag = r->operand[31] >> 2 & 1; + stat->ca_initialization_status = r->operand[31] >> 1 & 1; +out: + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst, + char conttone, char nrdiseq, + struct dvb_diseqc_master_cmd *diseqcmd) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + struct avc_response_frame *r = (void *)fdtv->avc_data; + int pos, j, k, ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_LNB_CONTROL; + c->operand[4] = voltage; + c->operand[5] = nrdiseq; + + pos = 6; + for (j = 0; j < nrdiseq; j++) { + c->operand[pos++] = diseqcmd[j].msg_len; + + for (k = 0; k < diseqcmd[j].msg_len; k++) + c->operand[pos++] = diseqcmd[j].msg[k]; + } + c->operand[pos++] = burst; + c->operand[pos++] = conttone; + pad_operands(c, pos); + + fdtv->avc_data_length = ALIGN(3 + pos, 4); + ret = avc_write(fdtv); + if (ret < 0) + goto out; + + if (r->response != AVC_RESPONSE_ACCEPTED) { + dev_err(fdtv->device, "LNB control failed\n"); + ret = -EINVAL; + } +out: + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +int avc_register_remote_control(struct firedtv *fdtv) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + int ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_NOTIFY; + c->subunit = AVC_SUBUNIT_TYPE_UNIT | 7; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL; + c->operand[4] = 0; /* padding */ + + fdtv->avc_data_length = 8; + ret = avc_write(fdtv); + + /* FIXME: check response code? */ + + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +void avc_remote_ctrl_work(struct work_struct *work) +{ + struct firedtv *fdtv = + container_of(work, struct firedtv, remote_ctrl_work); + + /* Should it be rescheduled in failure cases? */ + avc_register_remote_control(fdtv); +} + +#if 0 /* FIXME: unused */ +int avc_tuner_host2ca(struct firedtv *fdtv) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + int ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA; + c->operand[4] = 0; /* slot */ + c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */ + clear_operands(c, 6, 8); + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + + /* FIXME: check response code? */ + + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} +#endif + +static int get_ca_object_pos(struct avc_response_frame *r) +{ + int length = 1; + + /* Check length of length field */ + if (r->operand[7] & 0x80) + length = (r->operand[7] & 0x7f) + 1; + return length + 7; +} + +static int get_ca_object_length(struct avc_response_frame *r) +{ +#if 0 /* FIXME: unused */ + int size = 0; + int i; + + if (r->operand[7] & 0x80) + for (i = 0; i < (r->operand[7] & 0x7f); i++) { + size <<= 8; + size += r->operand[8 + i]; + } +#endif + return r->operand[7]; +} + +int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + struct avc_response_frame *r = (void *)fdtv->avc_data; + int pos, ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_STATUS; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST; + c->operand[4] = 0; /* slot */ + c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */ + clear_operands(c, 6, LAST_OPERAND); + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + if (ret < 0) + goto out; + + /* FIXME: check response code and validate response data */ + + pos = get_ca_object_pos(r); + app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff; + app_info[1] = (EN50221_TAG_APP_INFO >> 8) & 0xff; + app_info[2] = (EN50221_TAG_APP_INFO >> 0) & 0xff; + app_info[3] = 6 + r->operand[pos + 4]; + app_info[4] = 0x01; + memcpy(&app_info[5], &r->operand[pos], 5 + r->operand[pos + 4]); + *len = app_info[3] + 4; +out: + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + struct avc_response_frame *r = (void *)fdtv->avc_data; + int i, pos, ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_STATUS; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST; + c->operand[4] = 0; /* slot */ + c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */ + clear_operands(c, 6, LAST_OPERAND); + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + if (ret < 0) + goto out; + + /* FIXME: check response code and validate response data */ + + pos = get_ca_object_pos(r); + app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff; + app_info[1] = (EN50221_TAG_CA_INFO >> 8) & 0xff; + app_info[2] = (EN50221_TAG_CA_INFO >> 0) & 0xff; + if (num_fake_ca_system_ids == 0) { + app_info[3] = 2; + app_info[4] = r->operand[pos + 0]; + app_info[5] = r->operand[pos + 1]; + } else { + app_info[3] = num_fake_ca_system_ids * 2; + for (i = 0; i < num_fake_ca_system_ids; i++) { + app_info[4 + i * 2] = + (fake_ca_system_ids[i] >> 8) & 0xff; + app_info[5 + i * 2] = fake_ca_system_ids[i] & 0xff; + } + } + *len = app_info[3] + 4; +out: + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +int avc_ca_reset(struct firedtv *fdtv) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + int ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA; + c->operand[4] = 0; /* slot */ + c->operand[5] = SFE_VENDOR_TAG_CA_RESET; /* ca tag */ + c->operand[6] = 0; /* more/last */ + c->operand[7] = 1; /* length */ + c->operand[8] = 0; /* force hardware reset */ + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + + /* FIXME: check response code? */ + + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + struct avc_response_frame *r = (void *)fdtv->avc_data; + int list_management; + int program_info_length; + int pmt_cmd_id; + int read_pos; + int write_pos; + int es_info_length; + int crc32_csum; + int ret; + + if (unlikely(avc_debug & AVC_DEBUG_APPLICATION_PMT)) + debug_pmt(msg, length); + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_CONTROL; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + if (msg[0] != EN50221_LIST_MANAGEMENT_ONLY) { + dev_info(fdtv->device, "forcing list_management to ONLY\n"); + msg[0] = EN50221_LIST_MANAGEMENT_ONLY; + } + /* We take the cmd_id from the programme level only! */ + list_management = msg[0]; + program_info_length = ((msg[4] & 0x0f) << 8) + msg[5]; + if (program_info_length > 0) + program_info_length--; /* Remove pmt_cmd_id */ + pmt_cmd_id = msg[6]; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA; + c->operand[4] = 0; /* slot */ + c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */ + c->operand[6] = 0; /* more/last */ + /* Use three bytes for length field in case length > 127 */ + c->operand[10] = list_management; + c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */ + + /* TS program map table */ + + c->operand[12] = 0x02; /* Table id=2 */ + c->operand[13] = 0x80; /* Section syntax + length */ + + c->operand[15] = msg[1]; /* Program number */ + c->operand[16] = msg[2]; + c->operand[17] = msg[3]; /* Version number and current/next */ + c->operand[18] = 0x00; /* Section number=0 */ + c->operand[19] = 0x00; /* Last section number=0 */ + c->operand[20] = 0x1f; /* PCR_PID=1FFF */ + c->operand[21] = 0xff; + c->operand[22] = (program_info_length >> 8); /* Program info length */ + c->operand[23] = (program_info_length & 0xff); + + /* CA descriptors at programme level */ + read_pos = 6; + write_pos = 24; + if (program_info_length > 0) { + pmt_cmd_id = msg[read_pos++]; + if (pmt_cmd_id != 1 && pmt_cmd_id != 4) + dev_err(fdtv->device, + "invalid pmt_cmd_id %d\n", pmt_cmd_id); + + memcpy(&c->operand[write_pos], &msg[read_pos], + program_info_length); + read_pos += program_info_length; + write_pos += program_info_length; + } + while (read_pos < length) { + c->operand[write_pos++] = msg[read_pos++]; + c->operand[write_pos++] = msg[read_pos++]; + c->operand[write_pos++] = msg[read_pos++]; + es_info_length = + ((msg[read_pos] & 0x0f) << 8) + msg[read_pos + 1]; + read_pos += 2; + if (es_info_length > 0) + es_info_length--; /* Remove pmt_cmd_id */ + c->operand[write_pos++] = es_info_length >> 8; + c->operand[write_pos++] = es_info_length & 0xff; + if (es_info_length > 0) { + pmt_cmd_id = msg[read_pos++]; + if (pmt_cmd_id != 1 && pmt_cmd_id != 4) + dev_err(fdtv->device, "invalid pmt_cmd_id %d " + "at stream level\n", pmt_cmd_id); + + memcpy(&c->operand[write_pos], &msg[read_pos], + es_info_length); + read_pos += es_info_length; + write_pos += es_info_length; + } + } + write_pos += 4; /* CRC */ + + c->operand[7] = 0x82; + c->operand[8] = (write_pos - 10) >> 8; + c->operand[9] = (write_pos - 10) & 0xff; + c->operand[14] = write_pos - 15; + + crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1); + c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff; + c->operand[write_pos - 3] = (crc32_csum >> 16) & 0xff; + c->operand[write_pos - 2] = (crc32_csum >> 8) & 0xff; + c->operand[write_pos - 1] = (crc32_csum >> 0) & 0xff; + pad_operands(c, write_pos); + + fdtv->avc_data_length = ALIGN(3 + write_pos, 4); + ret = avc_write(fdtv); + if (ret < 0) + goto out; + + if (r->response != AVC_RESPONSE_ACCEPTED) { + dev_err(fdtv->device, + "CA PMT failed with response 0x%x\n", r->response); + ret = -EACCES; + } +out: + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +int avc_ca_get_time_date(struct firedtv *fdtv, int *interval) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + struct avc_response_frame *r = (void *)fdtv->avc_data; + int ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_STATUS; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST; + c->operand[4] = 0; /* slot */ + c->operand[5] = SFE_VENDOR_TAG_CA_DATE_TIME; /* ca tag */ + clear_operands(c, 6, LAST_OPERAND); + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + if (ret < 0) + goto out; + + /* FIXME: check response code and validate response data */ + + *interval = r->operand[get_ca_object_pos(r)]; +out: + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +int avc_ca_enter_menu(struct firedtv *fdtv) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + int ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_STATUS; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA; + c->operand[4] = 0; /* slot */ + c->operand[5] = SFE_VENDOR_TAG_CA_ENTER_MENU; + clear_operands(c, 6, 8); + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + + /* FIXME: check response code? */ + + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len) +{ + struct avc_command_frame *c = (void *)fdtv->avc_data; + struct avc_response_frame *r = (void *)fdtv->avc_data; + int ret; + + mutex_lock(&fdtv->avc_mutex); + + c->ctype = AVC_CTYPE_STATUS; + c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit; + c->opcode = AVC_OPCODE_VENDOR; + + c->operand[0] = SFE_VENDOR_DE_COMPANYID_0; + c->operand[1] = SFE_VENDOR_DE_COMPANYID_1; + c->operand[2] = SFE_VENDOR_DE_COMPANYID_2; + c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST; + c->operand[4] = 0; /* slot */ + c->operand[5] = SFE_VENDOR_TAG_CA_MMI; + clear_operands(c, 6, LAST_OPERAND); + + fdtv->avc_data_length = 12; + ret = avc_write(fdtv); + if (ret < 0) + goto out; + + /* FIXME: check response code and validate response data */ + + *len = get_ca_object_length(r); + memcpy(mmi_object, &r->operand[get_ca_object_pos(r)], *len); +out: + mutex_unlock(&fdtv->avc_mutex); + + return ret; +} + +#define CMP_OUTPUT_PLUG_CONTROL_REG_0 0xfffff0000904ULL + +static int cmp_read(struct firedtv *fdtv, u64 addr, __be32 *data) +{ + int ret; + + ret = fdtv_read(fdtv, addr, data); + if (ret < 0) + dev_err(fdtv->device, "CMP: read I/O error\n"); + + return ret; +} + +static int cmp_lock(struct firedtv *fdtv, u64 addr, __be32 data[]) +{ + int ret; + + ret = fdtv_lock(fdtv, addr, data); + if (ret < 0) + dev_err(fdtv->device, "CMP: lock I/O error\n"); + + return ret; +} + +static inline u32 get_opcr(__be32 opcr, u32 mask, u32 shift) +{ + return (be32_to_cpu(opcr) >> shift) & mask; +} + +static inline void set_opcr(__be32 *opcr, u32 value, u32 mask, u32 shift) +{ + *opcr &= ~cpu_to_be32(mask << shift); + *opcr |= cpu_to_be32((value & mask) << shift); +} + +#define get_opcr_online(v) get_opcr((v), 0x1, 31) +#define get_opcr_p2p_connections(v) get_opcr((v), 0x3f, 24) +#define get_opcr_channel(v) get_opcr((v), 0x3f, 16) + +#define set_opcr_p2p_connections(p, v) set_opcr((p), (v), 0x3f, 24) +#define set_opcr_channel(p, v) set_opcr((p), (v), 0x3f, 16) +#define set_opcr_data_rate(p, v) set_opcr((p), (v), 0x3, 14) +#define set_opcr_overhead_id(p, v) set_opcr((p), (v), 0xf, 10) + +int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel) +{ + __be32 old_opcr, opcr[2]; + u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2); + int attempts = 0; + int ret; + + ret = cmp_read(fdtv, opcr_address, opcr); + if (ret < 0) + return ret; + +repeat: + if (!get_opcr_online(*opcr)) { + dev_err(fdtv->device, "CMP: output offline\n"); + return -EBUSY; + } + + old_opcr = *opcr; + + if (get_opcr_p2p_connections(*opcr)) { + if (get_opcr_channel(*opcr) != channel) { + dev_err(fdtv->device, "CMP: cannot change channel\n"); + return -EBUSY; + } + dev_info(fdtv->device, "CMP: overlaying connection\n"); + + /* We don't allocate isochronous resources. */ + } else { + set_opcr_channel(opcr, channel); + set_opcr_data_rate(opcr, 2); /* S400 */ + + /* FIXME: this is for the worst case - optimize */ + set_opcr_overhead_id(opcr, 0); + + /* FIXME: allocate isochronous channel and bandwidth at IRM */ + } + + set_opcr_p2p_connections(opcr, get_opcr_p2p_connections(*opcr) + 1); + + opcr[1] = *opcr; + opcr[0] = old_opcr; + + ret = cmp_lock(fdtv, opcr_address, opcr); + if (ret < 0) + return ret; + + if (old_opcr != *opcr) { + /* + * FIXME: if old_opcr.P2P_Connections > 0, + * deallocate isochronous channel and bandwidth at IRM + */ + + if (++attempts < 6) /* arbitrary limit */ + goto repeat; + return -EBUSY; + } + + return 0; +} + +void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel) +{ + __be32 old_opcr, opcr[2]; + u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2); + int attempts = 0; + + if (cmp_read(fdtv, opcr_address, opcr) < 0) + return; + +repeat: + if (!get_opcr_online(*opcr) || !get_opcr_p2p_connections(*opcr) || + get_opcr_channel(*opcr) != channel) { + dev_err(fdtv->device, "CMP: no connection to break\n"); + return; + } + + old_opcr = *opcr; + set_opcr_p2p_connections(opcr, get_opcr_p2p_connections(*opcr) - 1); + + opcr[1] = *opcr; + opcr[0] = old_opcr; + + if (cmp_lock(fdtv, opcr_address, opcr) < 0) + return; + + if (old_opcr != *opcr) { + /* + * FIXME: if old_opcr.P2P_Connections == 1, i.e. we were last + * owner, deallocate isochronous channel and bandwidth at IRM + * if (...) + * fdtv->backend->dealloc_resources(fdtv, channel, bw); + */ + + if (++attempts < 6) /* arbitrary limit */ + goto repeat; + } +} diff --git a/drivers/media/firewire/firedtv-ci.c b/drivers/media/firewire/firedtv-ci.c new file mode 100644 index 00000000..e5ebdbfe --- /dev/null +++ b/drivers/media/firewire/firedtv-ci.c @@ -0,0 +1,258 @@ +/* + * FireDTV driver (formerly known as FireSAT) + * + * Copyright (C) 2004 Andreas Monitzer + * Copyright (C) 2008 Henrik Kurelid + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include + +#include + +#include "firedtv.h" + +#define EN50221_TAG_APP_INFO_ENQUIRY 0x9f8020 +#define EN50221_TAG_CA_INFO_ENQUIRY 0x9f8030 +#define EN50221_TAG_CA_PMT 0x9f8032 +#define EN50221_TAG_ENTER_MENU 0x9f8022 + +static int fdtv_ca_ready(struct firedtv_tuner_status *stat) +{ + return stat->ca_initialization_status == 1 && + stat->ca_error_flag == 0 && + stat->ca_dvb_flag == 1 && + stat->ca_module_present_status == 1; +} + +static int fdtv_get_ca_flags(struct firedtv_tuner_status *stat) +{ + int flags = 0; + + if (stat->ca_module_present_status == 1) + flags |= CA_CI_MODULE_PRESENT; + if (stat->ca_initialization_status == 1 && + stat->ca_error_flag == 0 && + stat->ca_dvb_flag == 1) + flags |= CA_CI_MODULE_READY; + return flags; +} + +static int fdtv_ca_get_caps(void *arg) +{ + struct ca_caps *cap = arg; + + cap->slot_num = 1; + cap->slot_type = CA_CI; + cap->descr_num = 1; + cap->descr_type = CA_ECD; + return 0; +} + +static int fdtv_ca_get_slot_info(struct firedtv *fdtv, void *arg) +{ + struct firedtv_tuner_status stat; + struct ca_slot_info *slot = arg; + int err; + + err = avc_tuner_status(fdtv, &stat); + if (err) + return err; + + if (slot->num != 0) + return -EACCES; + + slot->type = CA_CI; + slot->flags = fdtv_get_ca_flags(&stat); + return 0; +} + +static int fdtv_ca_app_info(struct firedtv *fdtv, void *arg) +{ + struct ca_msg *reply = arg; + + return avc_ca_app_info(fdtv, reply->msg, &reply->length); +} + +static int fdtv_ca_info(struct firedtv *fdtv, void *arg) +{ + struct ca_msg *reply = arg; + + return avc_ca_info(fdtv, reply->msg, &reply->length); +} + +static int fdtv_ca_get_mmi(struct firedtv *fdtv, void *arg) +{ + struct ca_msg *reply = arg; + + return avc_ca_get_mmi(fdtv, reply->msg, &reply->length); +} + +static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg) +{ + struct firedtv_tuner_status stat; + int err; + + switch (fdtv->ca_last_command) { + case EN50221_TAG_APP_INFO_ENQUIRY: + err = fdtv_ca_app_info(fdtv, arg); + break; + case EN50221_TAG_CA_INFO_ENQUIRY: + err = fdtv_ca_info(fdtv, arg); + break; + default: + err = avc_tuner_status(fdtv, &stat); + if (err) + break; + if (stat.ca_mmi == 1) + err = fdtv_ca_get_mmi(fdtv, arg); + else { + dev_info(fdtv->device, "unhandled CA message 0x%08x\n", + fdtv->ca_last_command); + err = -EACCES; + } + } + fdtv->ca_last_command = 0; + return err; +} + +static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg) +{ + struct ca_msg *msg = arg; + int data_pos; + int data_length; + int i; + + data_pos = 4; + if (msg->msg[3] & 0x80) { + data_length = 0; + for (i = 0; i < (msg->msg[3] & 0x7f); i++) + data_length = (data_length << 8) + msg->msg[data_pos++]; + } else { + data_length = msg->msg[3]; + } + + return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length); +} + +static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg) +{ + struct ca_msg *msg = arg; + int err; + + /* Do we need a semaphore for this? */ + fdtv->ca_last_command = + (msg->msg[0] << 16) + (msg->msg[1] << 8) + msg->msg[2]; + switch (fdtv->ca_last_command) { + case EN50221_TAG_CA_PMT: + err = fdtv_ca_pmt(fdtv, arg); + break; + case EN50221_TAG_APP_INFO_ENQUIRY: + /* handled in ca_get_msg */ + err = 0; + break; + case EN50221_TAG_CA_INFO_ENQUIRY: + /* handled in ca_get_msg */ + err = 0; + break; + case EN50221_TAG_ENTER_MENU: + err = avc_ca_enter_menu(fdtv); + break; + default: + dev_err(fdtv->device, "unhandled CA message 0x%08x\n", + fdtv->ca_last_command); + err = -EACCES; + } + return err; +} + +static int fdtv_ca_ioctl(struct file *file, unsigned int cmd, void *arg) +{ + struct dvb_device *dvbdev = file->private_data; + struct firedtv *fdtv = dvbdev->priv; + struct firedtv_tuner_status stat; + int err; + + switch (cmd) { + case CA_RESET: + err = avc_ca_reset(fdtv); + break; + case CA_GET_CAP: + err = fdtv_ca_get_caps(arg); + break; + case CA_GET_SLOT_INFO: + err = fdtv_ca_get_slot_info(fdtv, arg); + break; + case CA_GET_MSG: + err = fdtv_ca_get_msg(fdtv, arg); + break; + case CA_SEND_MSG: + err = fdtv_ca_send_msg(fdtv, arg); + break; + default: + dev_info(fdtv->device, "unhandled CA ioctl %u\n", cmd); + err = -EOPNOTSUPP; + } + + /* FIXME Is this necessary? */ + avc_tuner_status(fdtv, &stat); + + return err; +} + +static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait) +{ + return POLLIN; +} + +static const struct file_operations fdtv_ca_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = dvb_generic_ioctl, + .open = dvb_generic_open, + .release = dvb_generic_release, + .poll = fdtv_ca_io_poll, + .llseek = noop_llseek, +}; + +static struct dvb_device fdtv_ca = { + .users = 1, + .readers = 1, + .writers = 1, + .fops = &fdtv_ca_fops, + .kernel_ioctl = fdtv_ca_ioctl, +}; + +int fdtv_ca_register(struct firedtv *fdtv) +{ + struct firedtv_tuner_status stat; + int err; + + if (avc_tuner_status(fdtv, &stat)) + return -EINVAL; + + if (!fdtv_ca_ready(&stat)) + return -EFAULT; + + err = dvb_register_device(&fdtv->adapter, &fdtv->cadev, + &fdtv_ca, fdtv, DVB_DEVICE_CA); + + if (stat.ca_application_info == 0) + dev_err(fdtv->device, "CaApplicationInfo is not set\n"); + if (stat.ca_date_time_request == 1) + avc_ca_get_time_date(fdtv, &fdtv->ca_time_interval); + + return err; +} + +void fdtv_ca_release(struct firedtv *fdtv) +{ + if (fdtv->cadev) + dvb_unregister_device(fdtv->cadev); +} diff --git a/drivers/media/firewire/firedtv-dvb.c b/drivers/media/firewire/firedtv-dvb.c new file mode 100644 index 00000000..f710e179 --- /dev/null +++ b/drivers/media/firewire/firedtv-dvb.c @@ -0,0 +1,248 @@ +/* + * FireDTV driver (formerly known as FireSAT) + * + * Copyright (C) 2004 Andreas Monitzer + * Copyright (C) 2008 Henrik Kurelid + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "firedtv.h" + +static int alloc_channel(struct firedtv *fdtv) +{ + int i; + + for (i = 0; i < 16; i++) + if (!__test_and_set_bit(i, &fdtv->channel_active)) + break; + return i; +} + +static void collect_channels(struct firedtv *fdtv, int *pidc, u16 pid[]) +{ + int i, n; + + for (i = 0, n = 0; i < 16; i++) + if (test_bit(i, &fdtv->channel_active)) + pid[n++] = fdtv->channel_pid[i]; + *pidc = n; +} + +static inline void dealloc_channel(struct firedtv *fdtv, int i) +{ + __clear_bit(i, &fdtv->channel_active); +} + +int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct firedtv *fdtv = dvbdmxfeed->demux->priv; + int pidc, c, ret; + u16 pids[16]; + + switch (dvbdmxfeed->type) { + case DMX_TYPE_TS: + case DMX_TYPE_SEC: + break; + default: + dev_err(fdtv->device, "can't start dmx feed: invalid type %u\n", + dvbdmxfeed->type); + return -EINVAL; + } + + if (mutex_lock_interruptible(&fdtv->demux_mutex)) + return -EINTR; + + if (dvbdmxfeed->type == DMX_TYPE_TS) { + switch (dvbdmxfeed->pes_type) { + case DMX_PES_VIDEO: + case DMX_PES_AUDIO: + case DMX_PES_TELETEXT: + case DMX_PES_PCR: + case DMX_PES_OTHER: + c = alloc_channel(fdtv); + break; + default: + dev_err(fdtv->device, + "can't start dmx feed: invalid pes type %u\n", + dvbdmxfeed->pes_type); + ret = -EINVAL; + goto out; + } + } else { + c = alloc_channel(fdtv); + } + + if (c > 15) { + dev_err(fdtv->device, "can't start dmx feed: busy\n"); + ret = -EBUSY; + goto out; + } + + dvbdmxfeed->priv = (typeof(dvbdmxfeed->priv))(unsigned long)c; + fdtv->channel_pid[c] = dvbdmxfeed->pid; + collect_channels(fdtv, &pidc, pids); + + if (dvbdmxfeed->pid == 8192) { + ret = avc_tuner_get_ts(fdtv); + if (ret) { + dealloc_channel(fdtv, c); + dev_err(fdtv->device, "can't get TS\n"); + goto out; + } + } else { + ret = avc_tuner_set_pids(fdtv, pidc, pids); + if (ret) { + dealloc_channel(fdtv, c); + dev_err(fdtv->device, "can't set PIDs\n"); + goto out; + } + } +out: + mutex_unlock(&fdtv->demux_mutex); + + return ret; +} + +int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *demux = dvbdmxfeed->demux; + struct firedtv *fdtv = demux->priv; + int pidc, c, ret; + u16 pids[16]; + + if (dvbdmxfeed->type == DMX_TYPE_TS && + !((dvbdmxfeed->ts_type & TS_PACKET) && + (demux->dmx.frontend->source != DMX_MEMORY_FE))) { + + if (dvbdmxfeed->ts_type & TS_DECODER) { + if (dvbdmxfeed->pes_type >= DMX_PES_OTHER || + !demux->pesfilter[dvbdmxfeed->pes_type]) + return -EINVAL; + + demux->pids[dvbdmxfeed->pes_type] |= 0x8000; + demux->pesfilter[dvbdmxfeed->pes_type] = NULL; + } + + if (!(dvbdmxfeed->ts_type & TS_DECODER && + dvbdmxfeed->pes_type < DMX_PES_OTHER)) + return 0; + } + + if (mutex_lock_interruptible(&fdtv->demux_mutex)) + return -EINTR; + + c = (unsigned long)dvbdmxfeed->priv; + dealloc_channel(fdtv, c); + collect_channels(fdtv, &pidc, pids); + + ret = avc_tuner_set_pids(fdtv, pidc, pids); + + mutex_unlock(&fdtv->demux_mutex); + + return ret; +} + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int fdtv_dvb_register(struct firedtv *fdtv, const char *name) +{ + int err; + + err = dvb_register_adapter(&fdtv->adapter, name, + THIS_MODULE, fdtv->device, adapter_nr); + if (err < 0) + goto fail_log; + + /*DMX_TS_FILTERING | DMX_SECTION_FILTERING*/ + fdtv->demux.dmx.capabilities = 0; + + fdtv->demux.priv = fdtv; + fdtv->demux.filternum = 16; + fdtv->demux.feednum = 16; + fdtv->demux.start_feed = fdtv_start_feed; + fdtv->demux.stop_feed = fdtv_stop_feed; + fdtv->demux.write_to_decoder = NULL; + + err = dvb_dmx_init(&fdtv->demux); + if (err) + goto fail_unreg_adapter; + + fdtv->dmxdev.filternum = 16; + fdtv->dmxdev.demux = &fdtv->demux.dmx; + fdtv->dmxdev.capabilities = 0; + + err = dvb_dmxdev_init(&fdtv->dmxdev, &fdtv->adapter); + if (err) + goto fail_dmx_release; + + fdtv->frontend.source = DMX_FRONTEND_0; + + err = fdtv->demux.dmx.add_frontend(&fdtv->demux.dmx, &fdtv->frontend); + if (err) + goto fail_dmxdev_release; + + err = fdtv->demux.dmx.connect_frontend(&fdtv->demux.dmx, + &fdtv->frontend); + if (err) + goto fail_rem_frontend; + + err = dvb_net_init(&fdtv->adapter, &fdtv->dvbnet, &fdtv->demux.dmx); + if (err) + goto fail_disconnect_frontend; + + fdtv_frontend_init(fdtv, name); + err = dvb_register_frontend(&fdtv->adapter, &fdtv->fe); + if (err) + goto fail_net_release; + + err = fdtv_ca_register(fdtv); + if (err) + dev_info(fdtv->device, + "Conditional Access Module not enabled\n"); + return 0; + +fail_net_release: + dvb_net_release(&fdtv->dvbnet); +fail_disconnect_frontend: + fdtv->demux.dmx.close(&fdtv->demux.dmx); +fail_rem_frontend: + fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend); +fail_dmxdev_release: + dvb_dmxdev_release(&fdtv->dmxdev); +fail_dmx_release: + dvb_dmx_release(&fdtv->demux); +fail_unreg_adapter: + dvb_unregister_adapter(&fdtv->adapter); +fail_log: + dev_err(fdtv->device, "DVB initialization failed\n"); + return err; +} + +void fdtv_dvb_unregister(struct firedtv *fdtv) +{ + fdtv_ca_release(fdtv); + dvb_unregister_frontend(&fdtv->fe); + dvb_net_release(&fdtv->dvbnet); + fdtv->demux.dmx.close(&fdtv->demux.dmx); + fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend); + dvb_dmxdev_release(&fdtv->dmxdev); + dvb_dmx_release(&fdtv->demux); + dvb_unregister_adapter(&fdtv->adapter); +} diff --git a/drivers/media/firewire/firedtv-fe.c b/drivers/media/firewire/firedtv-fe.c new file mode 100644 index 00000000..6fe9793b --- /dev/null +++ b/drivers/media/firewire/firedtv-fe.c @@ -0,0 +1,254 @@ +/* + * FireDTV driver (formerly known as FireSAT) + * + * Copyright (C) 2004 Andreas Monitzer + * Copyright (C) 2008 Henrik Kurelid + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include + +#include "firedtv.h" + +static int fdtv_dvb_init(struct dvb_frontend *fe) +{ + struct firedtv *fdtv = fe->sec_priv; + int err; + + /* FIXME - allocate free channel at IRM */ + fdtv->isochannel = fdtv->adapter.num; + + err = cmp_establish_pp_connection(fdtv, fdtv->subunit, + fdtv->isochannel); + if (err) { + dev_err(fdtv->device, + "could not establish point to point connection\n"); + return err; + } + + return fdtv_start_iso(fdtv); +} + +static int fdtv_sleep(struct dvb_frontend *fe) +{ + struct firedtv *fdtv = fe->sec_priv; + + fdtv_stop_iso(fdtv); + cmp_break_pp_connection(fdtv, fdtv->subunit, fdtv->isochannel); + fdtv->isochannel = -1; + return 0; +} + +#define LNBCONTROL_DONTCARE 0xff + +static int fdtv_diseqc_send_master_cmd(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) +{ + struct firedtv *fdtv = fe->sec_priv; + + return avc_lnb_control(fdtv, LNBCONTROL_DONTCARE, LNBCONTROL_DONTCARE, + LNBCONTROL_DONTCARE, 1, cmd); +} + +static int fdtv_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t minicmd) +{ + return 0; +} + +static int fdtv_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct firedtv *fdtv = fe->sec_priv; + + fdtv->tone = tone; + return 0; +} + +static int fdtv_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct firedtv *fdtv = fe->sec_priv; + + fdtv->voltage = voltage; + return 0; +} + +static int fdtv_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct firedtv *fdtv = fe->sec_priv; + struct firedtv_tuner_status stat; + + if (avc_tuner_status(fdtv, &stat)) + return -EINVAL; + + if (stat.no_rf) + *status = 0; + else + *status = FE_HAS_SIGNAL | FE_HAS_VITERBI | FE_HAS_SYNC | + FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; +} + +static int fdtv_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct firedtv *fdtv = fe->sec_priv; + struct firedtv_tuner_status stat; + + if (avc_tuner_status(fdtv, &stat)) + return -EINVAL; + + *ber = stat.ber; + return 0; +} + +static int fdtv_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct firedtv *fdtv = fe->sec_priv; + struct firedtv_tuner_status stat; + + if (avc_tuner_status(fdtv, &stat)) + return -EINVAL; + + *strength = stat.signal_strength << 8; + return 0; +} + +static int fdtv_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct firedtv *fdtv = fe->sec_priv; + struct firedtv_tuner_status stat; + + if (avc_tuner_status(fdtv, &stat)) + return -EINVAL; + + /* C/N[dB] = -10 * log10(snr / 65535) */ + *snr = stat.carrier_noise_ratio * 257; + return 0; +} + +static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + return -EOPNOTSUPP; +} + +static int fdtv_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct firedtv *fdtv = fe->sec_priv; + + return avc_tuner_dsd(fdtv, p); +} + +void fdtv_frontend_init(struct firedtv *fdtv, const char *name) +{ + struct dvb_frontend_ops *ops = &fdtv->fe.ops; + struct dvb_frontend_info *fi = &ops->info; + + ops->init = fdtv_dvb_init; + ops->sleep = fdtv_sleep; + + ops->set_frontend = fdtv_set_frontend; + + ops->read_status = fdtv_read_status; + ops->read_ber = fdtv_read_ber; + ops->read_signal_strength = fdtv_read_signal_strength; + ops->read_snr = fdtv_read_snr; + ops->read_ucblocks = fdtv_read_uncorrected_blocks; + + ops->diseqc_send_master_cmd = fdtv_diseqc_send_master_cmd; + ops->diseqc_send_burst = fdtv_diseqc_send_burst; + ops->set_tone = fdtv_set_tone; + ops->set_voltage = fdtv_set_voltage; + + switch (fdtv->type) { + case FIREDTV_DVB_S: + ops->delsys[0] = SYS_DVBS; + + fi->frequency_min = 950000; + fi->frequency_max = 2150000; + fi->frequency_stepsize = 125; + fi->symbol_rate_min = 1000000; + fi->symbol_rate_max = 40000000; + + fi->caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK; + break; + + case FIREDTV_DVB_S2: + ops->delsys[0] = SYS_DVBS; + ops->delsys[1] = SYS_DVBS2; + + fi->frequency_min = 950000; + fi->frequency_max = 2150000; + fi->frequency_stepsize = 125; + fi->symbol_rate_min = 1000000; + fi->symbol_rate_max = 40000000; + + fi->caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_2G_MODULATION; + break; + + case FIREDTV_DVB_C: + ops->delsys[0] = SYS_DVBC_ANNEX_A; + + fi->frequency_min = 47000000; + fi->frequency_max = 866000000; + fi->frequency_stepsize = 62500; + fi->symbol_rate_min = 870000; + fi->symbol_rate_max = 6900000; + + fi->caps = FE_CAN_INVERSION_AUTO | + FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_QAM_AUTO; + break; + + case FIREDTV_DVB_T: + ops->delsys[0] = SYS_DVBT; + + fi->frequency_min = 49000000; + fi->frequency_max = 861000000; + fi->frequency_stepsize = 62500; + + fi->caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_2_3 | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO; + break; + + default: + dev_err(fdtv->device, "no frontend for model type %d\n", + fdtv->type); + } + strcpy(fi->name, name); + + fdtv->fe.dvb = &fdtv->adapter; + fdtv->fe.sec_priv = fdtv; +} diff --git a/drivers/media/firewire/firedtv-fw.c b/drivers/media/firewire/firedtv-fw.c new file mode 100644 index 00000000..e24ec539 --- /dev/null +++ b/drivers/media/firewire/firedtv-fw.c @@ -0,0 +1,429 @@ +/* + * FireDTV driver -- firewire I/O backend + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include "firedtv.h" + +static LIST_HEAD(node_list); +static DEFINE_SPINLOCK(node_list_lock); + +static inline struct fw_device *device_of(struct firedtv *fdtv) +{ + return fw_device(fdtv->device->parent); +} + +static int node_req(struct firedtv *fdtv, u64 addr, void *data, size_t len, + int tcode) +{ + struct fw_device *device = device_of(fdtv); + int rcode, generation = device->generation; + + smp_rmb(); /* node_id vs. generation */ + + rcode = fw_run_transaction(device->card, tcode, device->node_id, + generation, device->max_speed, addr, data, len); + + return rcode != RCODE_COMPLETE ? -EIO : 0; +} + +int fdtv_lock(struct firedtv *fdtv, u64 addr, void *data) +{ + return node_req(fdtv, addr, data, 8, TCODE_LOCK_COMPARE_SWAP); +} + +int fdtv_read(struct firedtv *fdtv, u64 addr, void *data) +{ + return node_req(fdtv, addr, data, 4, TCODE_READ_QUADLET_REQUEST); +} + +int fdtv_write(struct firedtv *fdtv, u64 addr, void *data, size_t len) +{ + return node_req(fdtv, addr, data, len, TCODE_WRITE_BLOCK_REQUEST); +} + +#define ISO_HEADER_SIZE 4 +#define CIP_HEADER_SIZE 8 +#define MPEG2_TS_HEADER_SIZE 4 +#define MPEG2_TS_SOURCE_PACKET_SIZE (4 + 188) + +#define MAX_PACKET_SIZE 1024 /* 776, rounded up to 2^n */ +#define PACKETS_PER_PAGE (PAGE_SIZE / MAX_PACKET_SIZE) +#define N_PACKETS 64 /* buffer size */ +#define N_PAGES DIV_ROUND_UP(N_PACKETS, PACKETS_PER_PAGE) +#define IRQ_INTERVAL 16 + +struct fdtv_ir_context { + struct fw_iso_context *context; + struct fw_iso_buffer buffer; + int interrupt_packet; + int current_packet; + char *pages[N_PAGES]; +}; + +static int queue_iso(struct fdtv_ir_context *ctx, int index) +{ + struct fw_iso_packet p; + + p.payload_length = MAX_PACKET_SIZE; + p.interrupt = !(++ctx->interrupt_packet & (IRQ_INTERVAL - 1)); + p.skip = 0; + p.header_length = ISO_HEADER_SIZE; + + return fw_iso_context_queue(ctx->context, &p, &ctx->buffer, + index * MAX_PACKET_SIZE); +} + +static void handle_iso(struct fw_iso_context *context, u32 cycle, + size_t header_length, void *header, void *data) +{ + struct firedtv *fdtv = data; + struct fdtv_ir_context *ctx = fdtv->ir_context; + __be32 *h, *h_end; + int length, err, i = ctx->current_packet; + char *p, *p_end; + + for (h = header, h_end = h + header_length / 4; h < h_end; h++) { + length = be32_to_cpup(h) >> 16; + if (unlikely(length > MAX_PACKET_SIZE)) { + dev_err(fdtv->device, "length = %d\n", length); + length = MAX_PACKET_SIZE; + } + + p = ctx->pages[i / PACKETS_PER_PAGE] + + (i % PACKETS_PER_PAGE) * MAX_PACKET_SIZE; + p_end = p + length; + + for (p += CIP_HEADER_SIZE + MPEG2_TS_HEADER_SIZE; p < p_end; + p += MPEG2_TS_SOURCE_PACKET_SIZE) + dvb_dmx_swfilter_packets(&fdtv->demux, p, 1); + + err = queue_iso(ctx, i); + if (unlikely(err)) + dev_err(fdtv->device, "requeue failed\n"); + + i = (i + 1) & (N_PACKETS - 1); + } + fw_iso_context_queue_flush(ctx->context); + ctx->current_packet = i; +} + +int fdtv_start_iso(struct firedtv *fdtv) +{ + struct fdtv_ir_context *ctx; + struct fw_device *device = device_of(fdtv); + int i, err; + + ctx = kmalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->context = fw_iso_context_create(device->card, + FW_ISO_CONTEXT_RECEIVE, fdtv->isochannel, + device->max_speed, ISO_HEADER_SIZE, handle_iso, fdtv); + if (IS_ERR(ctx->context)) { + err = PTR_ERR(ctx->context); + goto fail_free; + } + + err = fw_iso_buffer_init(&ctx->buffer, device->card, + N_PAGES, DMA_FROM_DEVICE); + if (err) + goto fail_context_destroy; + + ctx->interrupt_packet = 0; + ctx->current_packet = 0; + + for (i = 0; i < N_PAGES; i++) + ctx->pages[i] = page_address(ctx->buffer.pages[i]); + + for (i = 0; i < N_PACKETS; i++) { + err = queue_iso(ctx, i); + if (err) + goto fail; + } + + err = fw_iso_context_start(ctx->context, -1, 0, + FW_ISO_CONTEXT_MATCH_ALL_TAGS); + if (err) + goto fail; + + fdtv->ir_context = ctx; + + return 0; +fail: + fw_iso_buffer_destroy(&ctx->buffer, device->card); +fail_context_destroy: + fw_iso_context_destroy(ctx->context); +fail_free: + kfree(ctx); + + return err; +} + +void fdtv_stop_iso(struct firedtv *fdtv) +{ + struct fdtv_ir_context *ctx = fdtv->ir_context; + + fw_iso_context_stop(ctx->context); + fw_iso_buffer_destroy(&ctx->buffer, device_of(fdtv)->card); + fw_iso_context_destroy(ctx->context); + kfree(ctx); +} + +static void handle_fcp(struct fw_card *card, struct fw_request *request, + int tcode, int destination, int source, int generation, + unsigned long long offset, void *payload, size_t length, + void *callback_data) +{ + struct firedtv *f, *fdtv = NULL; + struct fw_device *device; + unsigned long flags; + int su; + + if (length < 2 || (((u8 *)payload)[0] & 0xf0) != 0) + return; + + su = ((u8 *)payload)[1] & 0x7; + + spin_lock_irqsave(&node_list_lock, flags); + list_for_each_entry(f, &node_list, list) { + device = device_of(f); + if (device->generation != generation) + continue; + + smp_rmb(); /* node_id vs. generation */ + + if (device->card == card && + device->node_id == source && + (f->subunit == su || (f->subunit == 0 && su == 0x7))) { + fdtv = f; + break; + } + } + spin_unlock_irqrestore(&node_list_lock, flags); + + if (fdtv) + avc_recv(fdtv, payload, length); +} + +static struct fw_address_handler fcp_handler = { + .length = CSR_FCP_END - CSR_FCP_RESPONSE, + .address_callback = handle_fcp, +}; + +static const struct fw_address_region fcp_region = { + .start = CSR_REGISTER_BASE + CSR_FCP_RESPONSE, + .end = CSR_REGISTER_BASE + CSR_FCP_END, +}; + +static const char * const model_names[] = { + [FIREDTV_UNKNOWN] = "unknown type", + [FIREDTV_DVB_S] = "FireDTV S/CI", + [FIREDTV_DVB_C] = "FireDTV C/CI", + [FIREDTV_DVB_T] = "FireDTV T/CI", + [FIREDTV_DVB_S2] = "FireDTV S2 ", +}; + +/* Adjust the template string if models with longer names appear. */ +#define MAX_MODEL_NAME_LEN sizeof("FireDTV ????") + +static int node_probe(struct device *dev) +{ + struct firedtv *fdtv; + char name[MAX_MODEL_NAME_LEN]; + int name_len, i, err; + + fdtv = kzalloc(sizeof(*fdtv), GFP_KERNEL); + if (!fdtv) + return -ENOMEM; + + dev_set_drvdata(dev, fdtv); + fdtv->device = dev; + fdtv->isochannel = -1; + fdtv->voltage = 0xff; + fdtv->tone = 0xff; + + mutex_init(&fdtv->avc_mutex); + init_waitqueue_head(&fdtv->avc_wait); + mutex_init(&fdtv->demux_mutex); + INIT_WORK(&fdtv->remote_ctrl_work, avc_remote_ctrl_work); + + name_len = fw_csr_string(fw_unit(dev)->directory, CSR_MODEL, + name, sizeof(name)); + for (i = ARRAY_SIZE(model_names); --i; ) + if (strlen(model_names[i]) <= name_len && + strncmp(name, model_names[i], name_len) == 0) + break; + fdtv->type = i; + + err = fdtv_register_rc(fdtv, dev); + if (err) + goto fail_free; + + spin_lock_irq(&node_list_lock); + list_add_tail(&fdtv->list, &node_list); + spin_unlock_irq(&node_list_lock); + + err = avc_identify_subunit(fdtv); + if (err) + goto fail; + + err = fdtv_dvb_register(fdtv, model_names[fdtv->type]); + if (err) + goto fail; + + avc_register_remote_control(fdtv); + + return 0; +fail: + spin_lock_irq(&node_list_lock); + list_del(&fdtv->list); + spin_unlock_irq(&node_list_lock); + fdtv_unregister_rc(fdtv); +fail_free: + kfree(fdtv); + + return err; +} + +static int node_remove(struct device *dev) +{ + struct firedtv *fdtv = dev_get_drvdata(dev); + + fdtv_dvb_unregister(fdtv); + + spin_lock_irq(&node_list_lock); + list_del(&fdtv->list); + spin_unlock_irq(&node_list_lock); + + fdtv_unregister_rc(fdtv); + + kfree(fdtv); + return 0; +} + +static void node_update(struct fw_unit *unit) +{ + struct firedtv *fdtv = dev_get_drvdata(&unit->device); + + if (fdtv->isochannel >= 0) + cmp_establish_pp_connection(fdtv, fdtv->subunit, + fdtv->isochannel); +} + +#define MATCH_FLAGS (IEEE1394_MATCH_VENDOR_ID | IEEE1394_MATCH_MODEL_ID | \ + IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION) + +#define DIGITAL_EVERYWHERE_OUI 0x001287 +#define AVC_UNIT_SPEC_ID_ENTRY 0x00a02d +#define AVC_SW_VERSION_ENTRY 0x010001 + +static const struct ieee1394_device_id fdtv_id_table[] = { + { + /* FloppyDTV S/CI and FloppyDTV S2 */ + .match_flags = MATCH_FLAGS, + .vendor_id = DIGITAL_EVERYWHERE_OUI, + .model_id = 0x000024, + .specifier_id = AVC_UNIT_SPEC_ID_ENTRY, + .version = AVC_SW_VERSION_ENTRY, + }, { + /* FloppyDTV T/CI */ + .match_flags = MATCH_FLAGS, + .vendor_id = DIGITAL_EVERYWHERE_OUI, + .model_id = 0x000025, + .specifier_id = AVC_UNIT_SPEC_ID_ENTRY, + .version = AVC_SW_VERSION_ENTRY, + }, { + /* FloppyDTV C/CI */ + .match_flags = MATCH_FLAGS, + .vendor_id = DIGITAL_EVERYWHERE_OUI, + .model_id = 0x000026, + .specifier_id = AVC_UNIT_SPEC_ID_ENTRY, + .version = AVC_SW_VERSION_ENTRY, + }, { + /* FireDTV S/CI and FloppyDTV S2 */ + .match_flags = MATCH_FLAGS, + .vendor_id = DIGITAL_EVERYWHERE_OUI, + .model_id = 0x000034, + .specifier_id = AVC_UNIT_SPEC_ID_ENTRY, + .version = AVC_SW_VERSION_ENTRY, + }, { + /* FireDTV T/CI */ + .match_flags = MATCH_FLAGS, + .vendor_id = DIGITAL_EVERYWHERE_OUI, + .model_id = 0x000035, + .specifier_id = AVC_UNIT_SPEC_ID_ENTRY, + .version = AVC_SW_VERSION_ENTRY, + }, { + /* FireDTV C/CI */ + .match_flags = MATCH_FLAGS, + .vendor_id = DIGITAL_EVERYWHERE_OUI, + .model_id = 0x000036, + .specifier_id = AVC_UNIT_SPEC_ID_ENTRY, + .version = AVC_SW_VERSION_ENTRY, + }, {} +}; +MODULE_DEVICE_TABLE(ieee1394, fdtv_id_table); + +static struct fw_driver fdtv_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "firedtv", + .bus = &fw_bus_type, + .probe = node_probe, + .remove = node_remove, + }, + .update = node_update, + .id_table = fdtv_id_table, +}; + +static int __init fdtv_init(void) +{ + int ret; + + ret = fw_core_add_address_handler(&fcp_handler, &fcp_region); + if (ret < 0) + return ret; + + ret = driver_register(&fdtv_driver.driver); + if (ret < 0) + fw_core_remove_address_handler(&fcp_handler); + + return ret; +} + +static void __exit fdtv_exit(void) +{ + driver_unregister(&fdtv_driver.driver); + fw_core_remove_address_handler(&fcp_handler); +} + +module_init(fdtv_init); +module_exit(fdtv_exit); + +MODULE_AUTHOR("Andreas Monitzer "); +MODULE_AUTHOR("Ben Backx "); +MODULE_DESCRIPTION("FireDTV DVB Driver"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("FireDTV DVB"); diff --git a/drivers/media/firewire/firedtv-rc.c b/drivers/media/firewire/firedtv-rc.c new file mode 100644 index 00000000..f82d4a93 --- /dev/null +++ b/drivers/media/firewire/firedtv-rc.c @@ -0,0 +1,196 @@ +/* + * FireDTV driver (formerly known as FireSAT) + * + * Copyright (C) 2004 Andreas Monitzer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "firedtv.h" + +/* fixed table with older keycodes, geared towards MythTV */ +static const u16 oldtable[] = { + + /* code from device: 0x4501...0x451f */ + + KEY_ESC, + KEY_F9, + KEY_1, + KEY_2, + KEY_3, + KEY_4, + KEY_5, + KEY_6, + KEY_7, + KEY_8, + KEY_9, + KEY_I, + KEY_0, + KEY_ENTER, + KEY_RED, + KEY_UP, + KEY_GREEN, + KEY_F10, + KEY_SPACE, + KEY_F11, + KEY_YELLOW, + KEY_DOWN, + KEY_BLUE, + KEY_Z, + KEY_P, + KEY_PAGEDOWN, + KEY_LEFT, + KEY_W, + KEY_RIGHT, + KEY_P, + KEY_M, + + /* code from device: 0x4540...0x4542 */ + + KEY_R, + KEY_V, + KEY_C, +}; + +/* user-modifiable table for a remote as sold in 2008 */ +static const u16 keytable[] = { + + /* code from device: 0x0300...0x031f */ + + [0x00] = KEY_POWER, + [0x01] = KEY_SLEEP, + [0x02] = KEY_STOP, + [0x03] = KEY_OK, + [0x04] = KEY_RIGHT, + [0x05] = KEY_1, + [0x06] = KEY_2, + [0x07] = KEY_3, + [0x08] = KEY_LEFT, + [0x09] = KEY_4, + [0x0a] = KEY_5, + [0x0b] = KEY_6, + [0x0c] = KEY_UP, + [0x0d] = KEY_7, + [0x0e] = KEY_8, + [0x0f] = KEY_9, + [0x10] = KEY_DOWN, + [0x11] = KEY_TITLE, /* "OSD" - fixme */ + [0x12] = KEY_0, + [0x13] = KEY_F20, /* "16:9" - fixme */ + [0x14] = KEY_SCREEN, /* "FULL" - fixme */ + [0x15] = KEY_MUTE, + [0x16] = KEY_SUBTITLE, + [0x17] = KEY_RECORD, + [0x18] = KEY_TEXT, + [0x19] = KEY_AUDIO, + [0x1a] = KEY_RED, + [0x1b] = KEY_PREVIOUS, + [0x1c] = KEY_REWIND, + [0x1d] = KEY_PLAYPAUSE, + [0x1e] = KEY_NEXT, + [0x1f] = KEY_VOLUMEUP, + + /* code from device: 0x0340...0x0354 */ + + [0x20] = KEY_CHANNELUP, + [0x21] = KEY_F21, /* "4:3" - fixme */ + [0x22] = KEY_TV, + [0x23] = KEY_DVD, + [0x24] = KEY_VCR, + [0x25] = KEY_AUX, + [0x26] = KEY_GREEN, + [0x27] = KEY_YELLOW, + [0x28] = KEY_BLUE, + [0x29] = KEY_CHANNEL, /* "CH.LIST" */ + [0x2a] = KEY_VENDOR, /* "CI" - fixme */ + [0x2b] = KEY_VOLUMEDOWN, + [0x2c] = KEY_CHANNELDOWN, + [0x2d] = KEY_LAST, + [0x2e] = KEY_INFO, + [0x2f] = KEY_FORWARD, + [0x30] = KEY_LIST, + [0x31] = KEY_FAVORITES, + [0x32] = KEY_MENU, + [0x33] = KEY_EPG, + [0x34] = KEY_EXIT, +}; + +int fdtv_register_rc(struct firedtv *fdtv, struct device *dev) +{ + struct input_dev *idev; + int i, err; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + fdtv->remote_ctrl_dev = idev; + idev->name = "FireDTV remote control"; + idev->dev.parent = dev; + idev->evbit[0] = BIT_MASK(EV_KEY); + idev->keycode = kmemdup(keytable, sizeof(keytable), GFP_KERNEL); + if (!idev->keycode) { + err = -ENOMEM; + goto fail; + } + idev->keycodesize = sizeof(keytable[0]); + idev->keycodemax = ARRAY_SIZE(keytable); + + for (i = 0; i < ARRAY_SIZE(keytable); i++) + set_bit(keytable[i], idev->keybit); + + err = input_register_device(idev); + if (err) + goto fail_free_keymap; + + return 0; + +fail_free_keymap: + kfree(idev->keycode); +fail: + input_free_device(idev); + return err; +} + +void fdtv_unregister_rc(struct firedtv *fdtv) +{ + cancel_work_sync(&fdtv->remote_ctrl_work); + kfree(fdtv->remote_ctrl_dev->keycode); + input_unregister_device(fdtv->remote_ctrl_dev); +} + +void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) +{ + struct input_dev *idev = fdtv->remote_ctrl_dev; + u16 *keycode = idev->keycode; + + if (code >= 0x0300 && code <= 0x031f) + code = keycode[code - 0x0300]; + else if (code >= 0x0340 && code <= 0x0354) + code = keycode[code - 0x0320]; + else if (code >= 0x4501 && code <= 0x451f) + code = oldtable[code - 0x4501]; + else if (code >= 0x4540 && code <= 0x4542) + code = oldtable[code - 0x4521]; + else { + printk(KERN_DEBUG "firedtv: invalid key code 0x%04x " + "from remote control\n", code); + return; + } + + input_report_key(idev, code, 1); + input_sync(idev); + input_report_key(idev, code, 0); + input_sync(idev); +} diff --git a/drivers/media/firewire/firedtv.h b/drivers/media/firewire/firedtv.h new file mode 100644 index 00000000..c2ba085e --- /dev/null +++ b/drivers/media/firewire/firedtv.h @@ -0,0 +1,169 @@ +/* + * FireDTV driver (formerly known as FireSAT) + * + * Copyright (C) 2004 Andreas Monitzer + * Copyright (C) 2008 Henrik Kurelid + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef _FIREDTV_H +#define _FIREDTV_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +struct firedtv_tuner_status { + unsigned active_system:8; + unsigned searching:1; + unsigned moving:1; + unsigned no_rf:1; + unsigned input:1; + unsigned selected_antenna:7; + unsigned ber:32; + unsigned signal_strength:8; + unsigned raster_frequency:2; + unsigned rf_frequency:22; + unsigned man_dep_info_length:8; + unsigned front_end_error:1; + unsigned antenna_error:1; + unsigned front_end_power_status:1; + unsigned power_supply:1; + unsigned carrier_noise_ratio:16; + unsigned power_supply_voltage:8; + unsigned antenna_voltage:8; + unsigned firewire_bus_voltage:8; + unsigned ca_mmi:1; + unsigned ca_pmt_reply:1; + unsigned ca_date_time_request:1; + unsigned ca_application_info:1; + unsigned ca_module_present_status:1; + unsigned ca_dvb_flag:1; + unsigned ca_error_flag:1; + unsigned ca_initialization_status:1; +}; + +enum model_type { + FIREDTV_UNKNOWN = 0, + FIREDTV_DVB_S = 1, + FIREDTV_DVB_C = 2, + FIREDTV_DVB_T = 3, + FIREDTV_DVB_S2 = 4, +}; + +struct device; +struct input_dev; +struct fdtv_ir_context; + +struct firedtv { + struct device *device; + struct list_head list; + + struct dvb_adapter adapter; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dmx_frontend frontend; + struct dvb_net dvbnet; + struct dvb_frontend fe; + + struct dvb_device *cadev; + int ca_last_command; + int ca_time_interval; + + struct mutex avc_mutex; + wait_queue_head_t avc_wait; + bool avc_reply_received; + struct work_struct remote_ctrl_work; + struct input_dev *remote_ctrl_dev; + + enum model_type type; + char subunit; + char isochannel; + struct fdtv_ir_context *ir_context; + + fe_sec_voltage_t voltage; + fe_sec_tone_mode_t tone; + + struct mutex demux_mutex; + unsigned long channel_active; + u16 channel_pid[16]; + + int avc_data_length; + u8 avc_data[512]; +}; + +/* firedtv-avc.c */ +int avc_recv(struct firedtv *fdtv, void *data, size_t length); +int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat); +struct dtv_frontend_properties; +int avc_tuner_dsd(struct firedtv *fdtv, struct dtv_frontend_properties *params); +int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[]); +int avc_tuner_get_ts(struct firedtv *fdtv); +int avc_identify_subunit(struct firedtv *fdtv); +struct dvb_diseqc_master_cmd; +int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst, + char conttone, char nrdiseq, + struct dvb_diseqc_master_cmd *diseqcmd); +void avc_remote_ctrl_work(struct work_struct *work); +int avc_register_remote_control(struct firedtv *fdtv); +int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len); +int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len); +int avc_ca_reset(struct firedtv *fdtv); +int avc_ca_pmt(struct firedtv *fdtv, char *app_info, int length); +int avc_ca_get_time_date(struct firedtv *fdtv, int *interval); +int avc_ca_enter_menu(struct firedtv *fdtv); +int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len); +int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel); +void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel); + +/* firedtv-ci.c */ +int fdtv_ca_register(struct firedtv *fdtv); +void fdtv_ca_release(struct firedtv *fdtv); + +/* firedtv-dvb.c */ +int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed); +int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed); +int fdtv_dvb_register(struct firedtv *fdtv, const char *name); +void fdtv_dvb_unregister(struct firedtv *fdtv); + +/* firedtv-fe.c */ +void fdtv_frontend_init(struct firedtv *fdtv, const char *name); + +/* firedtv-fw.c */ +int fdtv_lock(struct firedtv *fdtv, u64 addr, void *data); +int fdtv_read(struct firedtv *fdtv, u64 addr, void *data); +int fdtv_write(struct firedtv *fdtv, u64 addr, void *data, size_t len); +int fdtv_start_iso(struct firedtv *fdtv); +void fdtv_stop_iso(struct firedtv *fdtv); + +/* firedtv-rc.c */ +#ifdef CONFIG_DVB_FIREDTV_INPUT +int fdtv_register_rc(struct firedtv *fdtv, struct device *dev); +void fdtv_unregister_rc(struct firedtv *fdtv); +void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code); +#else +static inline int fdtv_register_rc(struct firedtv *fdtv, + struct device *dev) { return 0; } +static inline void fdtv_unregister_rc(struct firedtv *fdtv) {} +static inline void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) {} +#endif + +#endif /* _FIREDTV_H */ diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig new file mode 100644 index 00000000..f981d50a --- /dev/null +++ b/drivers/media/i2c/Kconfig @@ -0,0 +1,637 @@ +# +# Multimedia Video device configuration +# + +if VIDEO_V4L2 + +config VIDEO_IR_I2C + tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT + depends on I2C && RC_CORE + default y + ---help--- + Most boards have an IR chip directly connected via GPIO. However, + some video boards have the IR connected via I2C bus. + + If your board doesn't have an I2C IR chip, you may disable this + option. + + In doubt, say Y. + +# +# Encoder / Decoder module configuration +# + +menu "Encoders, decoders, sensors and other helper chips" + visible if !MEDIA_SUBDRV_AUTOSELECT + +comment "Audio decoders, processors and mixers" + +config VIDEO_TVAUDIO + tristate "Simple audio decoder chips" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for several audio decoder chips found on some bt8xx boards: + Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, + tea6320, tea6420, tda8425, ta8874z. + Microchip: pic16c54 based design on ProVideo PV951 board. + + To compile this driver as a module, choose M here: the + module will be called tvaudio. + +config VIDEO_TDA7432 + tristate "Philips TDA7432 audio processor" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for tda7432 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tda7432. + +config VIDEO_TDA9840 + tristate "Philips TDA9840 audio processor" + depends on I2C + ---help--- + Support for tda9840 audio decoder chip found on some Zoran boards. + + To compile this driver as a module, choose M here: the + module will be called tda9840. + +config VIDEO_TEA6415C + tristate "Philips TEA6415C audio processor" + depends on I2C + ---help--- + Support for tea6415c audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6415c. + +config VIDEO_TEA6420 + tristate "Philips TEA6420 audio processor" + depends on I2C + ---help--- + Support for tea6420 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6420. + +config VIDEO_MSP3400 + tristate "Micronas MSP34xx audio decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Micronas MSP34xx series of audio decoders. + + To compile this driver as a module, choose M here: the + module will be called msp3400. + +config VIDEO_CS5345 + tristate "Cirrus Logic CS5345 audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Cirrus Logic CS5345 24-bit, 192 kHz + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs5345. + +config VIDEO_CS53L32A + tristate "Cirrus Logic CS53L32A audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Cirrus Logic CS53L32A low voltage + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs53l32a. + +config VIDEO_TLV320AIC23B + tristate "Texas Instruments TLV320AIC23B audio codec" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TLV320AIC23B audio codec. + + To compile this driver as a module, choose M here: the + module will be called tlv320aic23b. + +config VIDEO_UDA1342 + tristate "Philips UDA1342 audio codec" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips UDA1342 audio codec. + + To compile this driver as a module, choose M here: the + module will be called uda1342. + +config VIDEO_WM8775 + tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Wolfson Microelectronics WM8775 high + performance stereo A/D Converter with a 4 channel input mixer. + + To compile this driver as a module, choose M here: the + module will be called wm8775. + +config VIDEO_WM8739 + tristate "Wolfson Microelectronics WM8739 stereo audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Wolfson Microelectronics WM8739 + stereo A/D Converter. + + To compile this driver as a module, choose M here: the + module will be called wm8739. + +config VIDEO_VP27SMPX + tristate "Panasonic VP27's internal MPX" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the internal MPX of the Panasonic VP27s tuner. + + To compile this driver as a module, choose M here: the + module will be called vp27smpx. + +config VIDEO_SONY_BTF_MPX + tristate "Sony BTF's internal MPX" + depends on VIDEO_V4L2 && I2C + help + Support for the internal MPX of the Sony BTF-PG472Z tuner. + + To compile this driver as a module, choose M here: the + module will be called sony-btf-mpx. + +comment "RDS decoders" + +config VIDEO_SAA6588 + tristate "SAA6588 Radio Chip RDS decoder support" + depends on VIDEO_V4L2 && I2C + + help + Support for this Radio Data System (RDS) decoder. This allows + seeing radio station identification transmitted using this + standard. + + To compile this driver as a module, choose M here: the + module will be called saa6588. + +comment "Video decoders" + +config VIDEO_ADV7180 + tristate "Analog Devices ADV7180 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7180 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7180. + +config VIDEO_ADV7183 + tristate "Analog Devices ADV7183 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + V4l2 subdevice driver for the Analog Devices + ADV7183 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7183. + +config VIDEO_ADV7604 + tristate "Analog Devices ADV7604 decoder" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + ---help--- + Support for the Analog Devices ADV7604 video decoder. + + This is a Analog Devices Component/Graphics Digitizer + with 4:1 Multiplexed HDMI Receiver. + + To compile this driver as a module, choose M here: the + module will be called adv7604. + +config VIDEO_BT819 + tristate "BT819A VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT819A video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt819. + +config VIDEO_BT856 + tristate "BT856 VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT856 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt856. + +config VIDEO_BT866 + tristate "BT866 VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT866 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt866. + +config VIDEO_KS0127 + tristate "KS0127 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for KS0127 video decoder. + + This chip is used on AverMedia AVS6EYES Zoran-based MJPEG + cards. + + To compile this driver as a module, choose M here: the + module will be called ks0127. + +config VIDEO_SAA7110 + tristate "Philips SAA7110 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7110 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7110. + +config VIDEO_SAA711X + tristate "Philips SAA7111/3/4/5 video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7111/3/4/5 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7115. + +config VIDEO_SAA7191 + tristate "Philips SAA7191 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7191 video decoder. + + To compile this driver as a module, choose M here: the + module will be called saa7191. + +config VIDEO_TVP514X + tristate "Texas Instruments TVP514x video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 + decoder. It is currently working with the TI OMAP3 camera + controller. + + To compile this driver as a module, choose M here: the + module will be called tvp514x. + +config VIDEO_TVP5150 + tristate "Texas Instruments TVP5150 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP5150 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp5150. + +config VIDEO_TVP7002 + tristate "Texas Instruments TVP7002 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP7002 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp7002. + +config VIDEO_TW2804 + tristate "Techwell TW2804 multiple video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Techwell tw2804 multiple video decoder. + + To compile this driver as a module, choose M here: the + module will be called tw2804. + +config VIDEO_TW9903 + tristate "Techwell TW9903 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Techwell tw9903 multi-standard video decoder + with high quality down scaler. + + To compile this driver as a module, choose M here: the + module will be called tw9903. + +config VIDEO_TW9906 + tristate "Techwell TW9906 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Techwell tw9906 enhanced multi-standard comb filter + video decoder with YCbCr input support. + + To compile this driver as a module, choose M here: the + module will be called tw9906. + +config VIDEO_VPX3220 + tristate "vpx3220a, vpx3216b & vpx3214c video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for VPX322x video decoders. + + To compile this driver as a module, choose M here: the + module will be called vpx3220. + +comment "Video and audio decoders" + +config VIDEO_SAA717X + tristate "Philips SAA7171/3/4 audio/video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7171/3/4 audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa717x. + +source "drivers/media/i2c/cx25840/Kconfig" + +comment "Video encoders" + +config VIDEO_SAA7127 + tristate "Philips SAA7127/9 digital video encoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7127/9 digital video encoders. + + To compile this driver as a module, choose M here: the + module will be called saa7127. + +config VIDEO_SAA7185 + tristate "Philips SAA7185 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7185 video encoder. + + To compile this driver as a module, choose M here: the + module will be called saa7185. + +config VIDEO_ADV7170 + tristate "Analog Devices ADV7170 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7170 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7170. + +config VIDEO_ADV7175 + tristate "Analog Devices ADV7175 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7175 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7175. + +config VIDEO_ADV7343 + tristate "ADV7343 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7343 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7343. + +config VIDEO_ADV7393 + tristate "ADV7393 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7393 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7393. + +config VIDEO_AD9389B + tristate "Analog Devices AD9389B encoder" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + ---help--- + Support for the Analog Devices AD9389B video encoder. + + This is a Analog Devices HDMI transmitter. + + To compile this driver as a module, choose M here: the + module will be called ad9389b. + +config VIDEO_AK881X + tristate "AK8813/AK8814 video encoders" + depends on I2C + help + Video output driver for AKM AK8813 and AK8814 TV encoders + +comment "Camera sensor devices" + +config VIDEO_APTINA_PLL + tristate + +config VIDEO_SMIAPP_PLL + tristate + +config VIDEO_OV7640 + tristate "OmniVision OV7640 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV7640 camera. + + To compile this driver as a module, choose M here: the + module will be called ov7640. + +config VIDEO_OV7670 + tristate "OmniVision OV7670 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV7670 VGA camera. It currently only works with the M88ALP01 + controller. + +config VIDEO_OV9650 + tristate "OmniVision OV9650/OV9652 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for the Omnivision + OV9650 and OV9652 camera sensors. + +config VIDEO_VS6624 + tristate "ST VS6624 sensor support" + depends on VIDEO_V4L2 && I2C + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the ST VS6624 + camera. + + To compile this driver as a module, choose M here: the + module will be called vs6624. + +config VIDEO_MT9M032 + tristate "MT9M032 camera sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_APTINA_PLL + ---help--- + This driver supports MT9M032 camera sensors from Aptina, monochrome + models only. + +config VIDEO_MT9P031 + tristate "Aptina MT9P031 support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_APTINA_PLL + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt9p031 5 Mpixel camera. + +config VIDEO_MT9T001 + tristate "Aptina MT9T001 support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt0t001 3 Mpixel camera. + +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + +config VIDEO_MT9V032 + tristate "Micron MT9V032 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + MT9V032 752x480 CMOS sensor. + +config VIDEO_TCM825X + tristate "TCM825x camera sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_INT_DEVICE + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the Toshiba TCM825x VGA camera sensor. + It is used for example in Nokia N800. + +config VIDEO_SR030PC30 + tristate "Siliconfile SR030PC30 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports SR030PC30 VGA camera from Siliconfile + +config VIDEO_NOON010PC30 + tristate "Siliconfile NOON010PC30 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports NOON010PC30 CIF camera from Siliconfile + +source "drivers/media/i2c/m5mols/Kconfig" + +config VIDEO_S5K6AA + tristate "Samsung S5K6AAFX sensor support" + depends on MEDIA_CAMERA_SUPPORT + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M + camera sensor with an embedded SoC image signal processor. + +config VIDEO_S5K4ECGX + tristate "Samsung S5K4ECGX sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M + camera sensor with an embedded SoC image signal processor. + +source "drivers/media/i2c/smiapp/Kconfig" + +config VIDEO_S5C73M3 + tristate "Samsung S5C73M3 sensor support" + depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5C73M3 + 8 Mpixel camera. + +comment "Flash devices" + +config VIDEO_ADP1653 + tristate "ADP1653 flash support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the ADP1653 flash controller. It is used for + example in Nokia N900. + +config VIDEO_AS3645A + tristate "AS3645A flash driver support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the AS3645A and LM3555 flash controllers. It has + build in control for flash, torch and indicator LEDs. + +comment "Video improvement chips" + +config VIDEO_UPD64031A + tristate "NEC Electronics uPD64031A Ghost Reduction" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the NEC Electronics uPD64031A Ghost Reduction + video chip. It is most often found in NTSC TV cards made for + Japan and is used to reduce the 'ghosting' effect that can + be present in analog TV broadcasts. + + To compile this driver as a module, choose M here: the + module will be called upd64031a. + +config VIDEO_UPD64083 + tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the NEC Electronics uPD64083 3-Dimensional Y/C + separation video chip. It is used to improve the quality of + the colors of a composite signal. + + To compile this driver as a module, choose M here: the + module will be called upd64083. + +comment "Miscelaneous helper chips" + +config VIDEO_THS7303 + tristate "THS7303/53 Video Amplifier" + depends on VIDEO_V4L2 && I2C + help + Support for TI THS7303/53 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + +config VIDEO_M52790 + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Mitsubishi M52790 A/V switch. + + To compile this driver as a module, choose M here: the + module will be called m52790. +endmenu + +menu "Sensors used on soc_camera driver" + +if SOC_CAMERA + source "drivers/media/i2c/soc_camera/Kconfig" +endif + +endmenu + +endif diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile new file mode 100644 index 00000000..720f42d9 --- /dev/null +++ b/drivers/media/i2c/Makefile @@ -0,0 +1,72 @@ +msp3400-objs := msp3400-driver.o msp3400-kthreads.o +obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o + +obj-$(CONFIG_VIDEO_SMIAPP) += smiapp/ +obj-$(CONFIG_VIDEO_CX25840) += cx25840/ +obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ +obj-y += soc_camera/ + +obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o +obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o +obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o +obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o +obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o +obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o +obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o +obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o +obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o +obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o +obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o +obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o +obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o +obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o +obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o +obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o +obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o +obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o +obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o +obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o +obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o +obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o +obj-$(CONFIG_VIDEO_VS6624) += vs6624.o +obj-$(CONFIG_VIDEO_BT819) += bt819.o +obj-$(CONFIG_VIDEO_BT856) += bt856.o +obj-$(CONFIG_VIDEO_BT866) += bt866.o +obj-$(CONFIG_VIDEO_KS0127) += ks0127.o +obj-$(CONFIG_VIDEO_THS7303) += ths7303.o +obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o +obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o +obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o +obj-$(CONFIG_VIDEO_TW2804) += tw2804.o +obj-$(CONFIG_VIDEO_TW9903) += tw9903.o +obj-$(CONFIG_VIDEO_TW9906) += tw9906.o +obj-$(CONFIG_VIDEO_CS5345) += cs5345.o +obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o +obj-$(CONFIG_VIDEO_M52790) += m52790.o +obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o +obj-$(CONFIG_VIDEO_UDA1342) += uda1342.o +obj-$(CONFIG_VIDEO_WM8775) += wm8775.o +obj-$(CONFIG_VIDEO_WM8739) += wm8739.o +obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o +obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o +obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o +obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o +obj-$(CONFIG_VIDEO_OV7640) += ov7640.o +obj-$(CONFIG_VIDEO_OV7670) += ov7670.o +obj-$(CONFIG_VIDEO_OV9650) += ov9650.o +obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o +obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o +obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o +obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o +obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o +obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o +obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o +obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o +obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o +obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/ +obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o +obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o +obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o +obj-$(CONFIG_VIDEO_AK881X) += ak881x.o +obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o diff --git a/drivers/media/i2c/ad9389b.c b/drivers/media/i2c/ad9389b.c new file mode 100644 index 00000000..58344b6c --- /dev/null +++ b/drivers/media/i2c/ad9389b.c @@ -0,0 +1,1328 @@ +/* + * Analog Devices AD9389B/AD9889B video encoder driver + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * References (c = chapter, p = page): + * REF_01 - Analog Devices, Programming Guide, AD9889B/AD9389B, + * HDMI Transitter, Rev. A, October 2010 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +MODULE_DESCRIPTION("Analog Devices AD9389B/AD9889B video encoder driver"); +MODULE_AUTHOR("Hans Verkuil "); +MODULE_AUTHOR("Martin Bugge "); +MODULE_LICENSE("GPL"); + +#define MASK_AD9389B_EDID_RDY_INT 0x04 +#define MASK_AD9389B_MSEN_INT 0x40 +#define MASK_AD9389B_HPD_INT 0x80 + +#define MASK_AD9389B_HPD_DETECT 0x40 +#define MASK_AD9389B_MSEN_DETECT 0x20 +#define MASK_AD9389B_EDID_RDY 0x10 + +#define EDID_MAX_RETRIES (8) +#define EDID_DELAY 250 +#define EDID_MAX_SEGM 8 + +/* +********************************************************************** +* +* Arrays with configuration parameters for the AD9389B +* +********************************************************************** +*/ + +struct i2c_reg_value { + u8 reg; + u8 value; +}; + +struct ad9389b_state_edid { + /* total number of blocks */ + u32 blocks; + /* Number of segments read */ + u32 segments; + u8 data[EDID_MAX_SEGM * 256]; + /* Number of EDID read retries left */ + unsigned read_retries; +}; + +struct ad9389b_state { + struct ad9389b_platform_data pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + int chip_revision; + /* Is the ad9389b powered on? */ + bool power_on; + /* Did we receive hotplug and rx-sense signals? */ + bool have_monitor; + /* timings from s_dv_timings */ + struct v4l2_dv_timings dv_timings; + /* controls */ + struct v4l2_ctrl *hdmi_mode_ctrl; + struct v4l2_ctrl *hotplug_ctrl; + struct v4l2_ctrl *rx_sense_ctrl; + struct v4l2_ctrl *have_edid0_ctrl; + struct v4l2_ctrl *rgb_quantization_range_ctrl; + struct i2c_client *edid_i2c_client; + struct ad9389b_state_edid edid; + /* Running counter of the number of detected EDIDs (for debugging) */ + unsigned edid_detect_counter; + struct workqueue_struct *work_queue; + struct delayed_work edid_handler; /* work entry */ +}; + +static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd); +static bool ad9389b_check_edid_status(struct v4l2_subdev *sd); +static void ad9389b_setup(struct v4l2_subdev *sd); +static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq); +static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq); + +static inline struct ad9389b_state *get_ad9389b_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ad9389b_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ad9389b_state, hdl)->sd; +} + +/* ------------------------ I2C ----------------------------------------------- */ + +static int ad9389b_rd(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int ad9389b_wr(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret == 0) + return 0; + } + v4l2_err(sd, "I2C Write Problem\n"); + return ret; +} + +/* To set specific bits in the register, a clear-mask is given (to be AND-ed), + and then the value-mask (to be OR-ed). */ +static inline void ad9389b_wr_and_or(struct v4l2_subdev *sd, u8 reg, + u8 clr_mask, u8 val_mask) +{ + ad9389b_wr(sd, reg, (ad9389b_rd(sd, reg) & clr_mask) | val_mask); +} + +static void ad9389b_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + int i; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + for (i = 0; i < len; i++) + buf[i] = i2c_smbus_read_byte_data(state->edid_i2c_client, i); +} + +static inline bool ad9389b_have_hotplug(struct v4l2_subdev *sd) +{ + return ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT; +} + +static inline bool ad9389b_have_rx_sense(struct v4l2_subdev *sd) +{ + return ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT; +} + +static void ad9389b_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode) +{ + ad9389b_wr_and_or(sd, 0x17, 0xe7, (mode & 0x3)<<3); + ad9389b_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5); +} + +static void ad9389b_csc_coeff(struct v4l2_subdev *sd, + u16 A1, u16 A2, u16 A3, u16 A4, + u16 B1, u16 B2, u16 B3, u16 B4, + u16 C1, u16 C2, u16 C3, u16 C4) +{ + /* A */ + ad9389b_wr_and_or(sd, 0x18, 0xe0, A1>>8); + ad9389b_wr(sd, 0x19, A1); + ad9389b_wr_and_or(sd, 0x1A, 0xe0, A2>>8); + ad9389b_wr(sd, 0x1B, A2); + ad9389b_wr_and_or(sd, 0x1c, 0xe0, A3>>8); + ad9389b_wr(sd, 0x1d, A3); + ad9389b_wr_and_or(sd, 0x1e, 0xe0, A4>>8); + ad9389b_wr(sd, 0x1f, A4); + + /* B */ + ad9389b_wr_and_or(sd, 0x20, 0xe0, B1>>8); + ad9389b_wr(sd, 0x21, B1); + ad9389b_wr_and_or(sd, 0x22, 0xe0, B2>>8); + ad9389b_wr(sd, 0x23, B2); + ad9389b_wr_and_or(sd, 0x24, 0xe0, B3>>8); + ad9389b_wr(sd, 0x25, B3); + ad9389b_wr_and_or(sd, 0x26, 0xe0, B4>>8); + ad9389b_wr(sd, 0x27, B4); + + /* C */ + ad9389b_wr_and_or(sd, 0x28, 0xe0, C1>>8); + ad9389b_wr(sd, 0x29, C1); + ad9389b_wr_and_or(sd, 0x2A, 0xe0, C2>>8); + ad9389b_wr(sd, 0x2B, C2); + ad9389b_wr_and_or(sd, 0x2C, 0xe0, C3>>8); + ad9389b_wr(sd, 0x2D, C3); + ad9389b_wr_and_or(sd, 0x2E, 0xe0, C4>>8); + ad9389b_wr(sd, 0x2F, C4); +} + +static void ad9389b_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable) +{ + if (enable) { + u8 csc_mode = 0; + + ad9389b_csc_conversion_mode(sd, csc_mode); + ad9389b_csc_coeff(sd, + 4096-564, 0, 0, 256, + 0, 4096-564, 0, 256, + 0, 0, 4096-564, 256); + /* enable CSC */ + ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x1); + /* AVI infoframe: Limited range RGB (16-235) */ + ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x02); + } else { + /* disable CSC */ + ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x0); + /* AVI infoframe: Full range RGB (0-255) */ + ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x04); + } +} + +static void ad9389b_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + /* CEA format, not IT */ + ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x00); + } else { + /* IT format */ + ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x40); + } +} + +static int ad9389b_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + switch (ctrl->val) { + case V4L2_DV_RGB_RANGE_AUTO: + /* automatic */ + if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + /* cea format, RGB limited range (16-235) */ + ad9389b_csc_rgb_full2limit(sd, true); + } else { + /* not cea format, RGB full range (0-255) */ + ad9389b_csc_rgb_full2limit(sd, false); + } + break; + case V4L2_DV_RGB_RANGE_LIMITED: + /* RGB limited range (16-235) */ + ad9389b_csc_rgb_full2limit(sd, true); + break; + case V4L2_DV_RGB_RANGE_FULL: + /* RGB full range (0-255) */ + ad9389b_csc_rgb_full2limit(sd, false); + break; + default: + return -EINVAL; + } + return 0; +} + +static void ad9389b_set_manual_pll_gear(struct v4l2_subdev *sd, u32 pixelclock) +{ + u8 gear; + + /* Workaround for TMDS PLL problem + * The TMDS PLL in AD9389b change gear when the chip is heated above a + * certain temperature. The output is disabled when the PLL change gear + * so the monitor has to lock on the signal again. A workaround for + * this is to use the manual PLL gears. This is a solution from Analog + * Devices that is not documented in the datasheets. + * 0x98 [7] = enable manual gearing. 0x98 [6:4] = gear + * + * The pixel frequency ranges are based on readout of the gear the + * automatic gearing selects for different pixel clocks + * (read from 0x9e [3:1]). + */ + + if (pixelclock > 140000000) + gear = 0xc0; /* 4th gear */ + else if (pixelclock > 117000000) + gear = 0xb0; /* 3rd gear */ + else if (pixelclock > 87000000) + gear = 0xa0; /* 2nd gear */ + else if (pixelclock > 60000000) + gear = 0x90; /* 1st gear */ + else + gear = 0x80; /* 0th gear */ + + ad9389b_wr_and_or(sd, 0x98, 0x0f, gear); +} + +/* ------------------------------ CTRL OPS ------------------------------ */ + +static int ad9389b_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, + "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val); + + if (state->hdmi_mode_ctrl == ctrl) { + /* Set HDMI or DVI-D */ + ad9389b_wr_and_or(sd, 0xaf, 0xfd, + ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00); + return 0; + } + if (state->rgb_quantization_range_ctrl == ctrl) + return ad9389b_set_rgb_quantization_mode(sd, ctrl); + return -EINVAL; +} + +static const struct v4l2_ctrl_ops ad9389b_ctrl_ops = { + .s_ctrl = ad9389b_s_ctrl, +}; + +/* ---------------------------- CORE OPS ------------------------------------------- */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ad9389b_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = ad9389b_rd(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int ad9389b_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + ad9389b_wr(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int ad9389b_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_AD9389B, 0); +} + +static int ad9389b_log_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_state_edid *edid = &state->edid; + + static const char * const states[] = { + "in reset", + "reading EDID", + "idle", + "initializing HDCP", + "HDCP enabled", + "initializing HDCP repeater", + "6", "7", "8", "9", "A", "B", "C", "D", "E", "F" + }; + static const char * const errors[] = { + "no error", + "bad receiver BKSV", + "Ri mismatch", + "Pj mismatch", + "i2c error", + "timed out", + "max repeater cascade exceeded", + "hash check failed", + "too many devices", + "9", "A", "B", "C", "D", "E", "F" + }; + + u8 manual_gear; + + v4l2_info(sd, "chip revision %d\n", state->chip_revision); + v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off"); + v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n", + (ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT) ? + "detected" : "no", + (ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT) ? + "detected" : "no", + edid->segments ? "found" : "no", edid->blocks); + if (state->have_monitor) { + v4l2_info(sd, "%s output %s\n", + (ad9389b_rd(sd, 0xaf) & 0x02) ? + "HDMI" : "DVI-D", + (ad9389b_rd(sd, 0xa1) & 0x3c) ? + "disabled" : "enabled"); + } + v4l2_info(sd, "ad9389b: %s\n", (ad9389b_rd(sd, 0xb8) & 0x40) ? + "encrypted" : "no encryption"); + v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n", + states[ad9389b_rd(sd, 0xc8) & 0xf], + errors[ad9389b_rd(sd, 0xc8) >> 4], + state->edid_detect_counter, + ad9389b_rd(sd, 0x94), ad9389b_rd(sd, 0x96)); + manual_gear = ad9389b_rd(sd, 0x98) & 0x80; + v4l2_info(sd, "ad9389b: RGB quantization: %s range\n", + ad9389b_rd(sd, 0x3b) & 0x01 ? "limited" : "full"); + v4l2_info(sd, "ad9389b: %s gear %d\n", + manual_gear ? "manual" : "automatic", + manual_gear ? ((ad9389b_rd(sd, 0x98) & 0x70) >> 4) : + ((ad9389b_rd(sd, 0x9e) & 0x0e) >> 1)); + if (state->have_monitor) { + if (ad9389b_rd(sd, 0xaf) & 0x02) { + /* HDMI only */ + u8 manual_cts = ad9389b_rd(sd, 0x0a) & 0x80; + u32 N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | + ad9389b_rd(sd, 0x02) << 8 | + ad9389b_rd(sd, 0x03); + u8 vic_detect = ad9389b_rd(sd, 0x3e) >> 2; + u8 vic_sent = ad9389b_rd(sd, 0x3d) & 0x3f; + u32 CTS; + + if (manual_cts) + CTS = (ad9389b_rd(sd, 0x07) & 0xf) << 16 | + ad9389b_rd(sd, 0x08) << 8 | + ad9389b_rd(sd, 0x09); + else + CTS = (ad9389b_rd(sd, 0x04) & 0xf) << 16 | + ad9389b_rd(sd, 0x05) << 8 | + ad9389b_rd(sd, 0x06); + N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | + ad9389b_rd(sd, 0x02) << 8 | + ad9389b_rd(sd, 0x03); + + v4l2_info(sd, "ad9389b: CTS %s mode: N %d, CTS %d\n", + manual_cts ? "manual" : "automatic", N, CTS); + + v4l2_info(sd, "ad9389b: VIC: detected %d, sent %d\n", + vic_detect, vic_sent); + } + } + if (state->dv_timings.type == V4L2_DV_BT_656_1120) { + struct v4l2_bt_timings *bt = bt = &state->dv_timings.bt; + u32 frame_width = bt->width + bt->hfrontporch + + bt->hsync + bt->hbackporch; + u32 frame_height = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + u32 frame_size = frame_width * frame_height; + + v4l2_info(sd, "timings: %ux%u%s%u (%ux%u). Pix freq. = %u Hz. Polarities = 0x%x\n", + bt->width, bt->height, bt->interlaced ? "i" : "p", + frame_size > 0 ? (unsigned)bt->pixelclock / frame_size : 0, + frame_width, frame_height, + (unsigned)bt->pixelclock, bt->polarities); + } else { + v4l2_info(sd, "no timings set\n"); + } + return 0; +} + +/* Power up/down ad9389b */ +static int ad9389b_s_power(struct v4l2_subdev *sd, int on) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_platform_data *pdata = &state->pdata; + const int retries = 20; + int i; + + v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off"); + + state->power_on = on; + + if (!on) { + /* Power down */ + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); + return true; + } + + /* Power up */ + /* The ad9389b does not always come up immediately. + Retry multiple times. */ + for (i = 0; i < retries; i++) { + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x0); + if ((ad9389b_rd(sd, 0x41) & 0x40) == 0) + break; + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); + msleep(10); + } + if (i == retries) { + v4l2_dbg(1, debug, sd, "failed to powerup the ad9389b\n"); + ad9389b_s_power(sd, 0); + return false; + } + if (i > 1) + v4l2_dbg(1, debug, sd, + "needed %d retries to powerup the ad9389b\n", i); + + /* Select chip: AD9389B */ + ad9389b_wr_and_or(sd, 0xba, 0xef, 0x10); + + /* Reserved registers that must be set according to REF_01 p. 11*/ + ad9389b_wr_and_or(sd, 0x98, 0xf0, 0x07); + ad9389b_wr(sd, 0x9c, 0x38); + ad9389b_wr_and_or(sd, 0x9d, 0xfc, 0x01); + + /* Differential output drive strength */ + if (pdata->diff_data_drive_strength > 0) + ad9389b_wr(sd, 0xa2, pdata->diff_data_drive_strength); + else + ad9389b_wr(sd, 0xa2, 0x87); + + if (pdata->diff_clk_drive_strength > 0) + ad9389b_wr(sd, 0xa3, pdata->diff_clk_drive_strength); + else + ad9389b_wr(sd, 0xa3, 0x87); + + ad9389b_wr(sd, 0x0a, 0x01); + ad9389b_wr(sd, 0xbb, 0xff); + + /* Set number of attempts to read the EDID */ + ad9389b_wr(sd, 0xc9, 0xf); + return true; +} + +/* Enable interrupts */ +static void ad9389b_set_isr(struct v4l2_subdev *sd, bool enable) +{ + u8 irqs = MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT; + u8 irqs_rd; + int retries = 100; + + /* The datasheet says that the EDID ready interrupt should be + disabled if there is no hotplug. */ + if (!enable) + irqs = 0; + else if (ad9389b_have_hotplug(sd)) + irqs |= MASK_AD9389B_EDID_RDY_INT; + + /* + * This i2c write can fail (approx. 1 in 1000 writes). But it + * is essential that this register is correct, so retry it + * multiple times. + * + * Note that the i2c write does not report an error, but the readback + * clearly shows the wrong value. + */ + do { + ad9389b_wr(sd, 0x94, irqs); + irqs_rd = ad9389b_rd(sd, 0x94); + } while (retries-- && irqs_rd != irqs); + + if (irqs_rd != irqs) + v4l2_err(sd, "Could not set interrupts: hw failure?\n"); +} + +/* Interrupt handler */ +static int ad9389b_isr(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + u8 irq_status; + + /* disable interrupts to prevent a race condition */ + ad9389b_set_isr(sd, false); + irq_status = ad9389b_rd(sd, 0x96); + /* clear detected interrupts */ + ad9389b_wr(sd, 0x96, irq_status); + + if (irq_status & (MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT)) + ad9389b_check_monitor_present_status(sd); + if (irq_status & MASK_AD9389B_EDID_RDY_INT) + ad9389b_check_edid_status(sd); + + /* enable interrupts */ + ad9389b_set_isr(sd, true); + *handled = true; + return 0; +} + +static const struct v4l2_subdev_core_ops ad9389b_core_ops = { + .log_status = ad9389b_log_status, + .g_chip_ident = ad9389b_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ad9389b_g_register, + .s_register = ad9389b_s_register, +#endif + .s_power = ad9389b_s_power, + .interrupt_service_routine = ad9389b_isr, +}; + +/* ------------------------------ PAD OPS ------------------------------ */ + +static int ad9389b_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + if (edid->pad != 0) + return -EINVAL; + if (edid->blocks == 0 || edid->blocks > 256) + return -EINVAL; + if (!edid->edid) + return -EINVAL; + if (!state->edid.segments) { + v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n"); + return -ENODATA; + } + if (edid->start_block >= state->edid.segments * 2) + return -E2BIG; + if (edid->blocks + edid->start_block >= state->edid.segments * 2) + edid->blocks = state->edid.segments * 2 - edid->start_block; + memcpy(edid->edid, &state->edid.data[edid->start_block * 128], + 128 * edid->blocks); + return 0; +} + +static const struct v4l2_subdev_pad_ops ad9389b_pad_ops = { + .get_edid = ad9389b_get_edid, +}; + +/* ------------------------------ VIDEO OPS ------------------------------ */ + +/* Enable/disable ad9389b output */ +static int ad9389b_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + + ad9389b_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c)); + if (enable) { + ad9389b_check_monitor_present_status(sd); + } else { + ad9389b_s_power(sd, 0); + state->have_monitor = false; + } + return 0; +} + +static const struct v4l2_dv_timings ad9389b_timings[] = { + V4L2_DV_BT_CEA_720X480P59_94, + V4L2_DV_BT_CEA_720X576P50, + V4L2_DV_BT_CEA_1280X720P24, + V4L2_DV_BT_CEA_1280X720P25, + V4L2_DV_BT_CEA_1280X720P30, + V4L2_DV_BT_CEA_1280X720P50, + V4L2_DV_BT_CEA_1280X720P60, + V4L2_DV_BT_CEA_1920X1080P24, + V4L2_DV_BT_CEA_1920X1080P25, + V4L2_DV_BT_CEA_1920X1080P30, + V4L2_DV_BT_CEA_1920X1080P50, + V4L2_DV_BT_CEA_1920X1080P60, + + V4L2_DV_BT_DMT_640X350P85, + V4L2_DV_BT_DMT_640X400P85, + V4L2_DV_BT_DMT_720X400P85, + V4L2_DV_BT_DMT_640X480P60, + V4L2_DV_BT_DMT_640X480P72, + V4L2_DV_BT_DMT_640X480P75, + V4L2_DV_BT_DMT_640X480P85, + V4L2_DV_BT_DMT_800X600P56, + V4L2_DV_BT_DMT_800X600P60, + V4L2_DV_BT_DMT_800X600P72, + V4L2_DV_BT_DMT_800X600P75, + V4L2_DV_BT_DMT_800X600P85, + V4L2_DV_BT_DMT_848X480P60, + V4L2_DV_BT_DMT_1024X768P60, + V4L2_DV_BT_DMT_1024X768P70, + V4L2_DV_BT_DMT_1024X768P75, + V4L2_DV_BT_DMT_1024X768P85, + V4L2_DV_BT_DMT_1152X864P75, + V4L2_DV_BT_DMT_1280X768P60_RB, + V4L2_DV_BT_DMT_1280X768P60, + V4L2_DV_BT_DMT_1280X768P75, + V4L2_DV_BT_DMT_1280X768P85, + V4L2_DV_BT_DMT_1280X800P60_RB, + V4L2_DV_BT_DMT_1280X800P60, + V4L2_DV_BT_DMT_1280X800P75, + V4L2_DV_BT_DMT_1280X800P85, + V4L2_DV_BT_DMT_1280X960P60, + V4L2_DV_BT_DMT_1280X960P85, + V4L2_DV_BT_DMT_1280X1024P60, + V4L2_DV_BT_DMT_1280X1024P75, + V4L2_DV_BT_DMT_1280X1024P85, + V4L2_DV_BT_DMT_1360X768P60, + V4L2_DV_BT_DMT_1400X1050P60_RB, + V4L2_DV_BT_DMT_1400X1050P60, + V4L2_DV_BT_DMT_1400X1050P75, + V4L2_DV_BT_DMT_1400X1050P85, + V4L2_DV_BT_DMT_1440X900P60_RB, + V4L2_DV_BT_DMT_1440X900P60, + V4L2_DV_BT_DMT_1600X1200P60, + V4L2_DV_BT_DMT_1680X1050P60_RB, + V4L2_DV_BT_DMT_1680X1050P60, + V4L2_DV_BT_DMT_1792X1344P60, + V4L2_DV_BT_DMT_1856X1392P60, + V4L2_DV_BT_DMT_1920X1200P60_RB, + V4L2_DV_BT_DMT_1366X768P60, + V4L2_DV_BT_DMT_1920X1080P60, + {}, +}; + +static int ad9389b_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + int i; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + /* quick sanity check */ + if (timings->type != V4L2_DV_BT_656_1120) + return -EINVAL; + + if (timings->bt.interlaced) + return -EINVAL; + if (timings->bt.pixelclock < 27000000 || + timings->bt.pixelclock > 170000000) + return -EINVAL; + + /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings + if the format is listed in ad9389b_timings[] */ + for (i = 0; ad9389b_timings[i].bt.width; i++) { + if (v4l_match_dv_timings(timings, &ad9389b_timings[i], 0)) { + *timings = ad9389b_timings[i]; + break; + } + } + + timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS; + + /* save timings */ + state->dv_timings = *timings; + + /* update quantization range based on new dv_timings */ + ad9389b_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); + + /* update PLL gear based on new dv_timings */ + if (state->pdata.tmds_pll_gear == AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC) + ad9389b_set_manual_pll_gear(sd, (u32)timings->bt.pixelclock); + + /* update AVI infoframe */ + ad9389b_set_IT_content_AVI_InfoFrame(sd); + + return 0; +} + +static int ad9389b_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (!timings) + return -EINVAL; + + *timings = state->dv_timings; + + return 0; +} + +static int ad9389b_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + if (timings->index >= ARRAY_SIZE(ad9389b_timings)) + return -EINVAL; + + memset(timings->reserved, 0, sizeof(timings->reserved)); + timings->timings = ad9389b_timings[timings->index]; + return 0; +} + +static int ad9389b_dv_timings_cap(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap) +{ + cap->type = V4L2_DV_BT_656_1120; + cap->bt.max_width = 1920; + cap->bt.max_height = 1200; + cap->bt.min_pixelclock = 27000000; + cap->bt.max_pixelclock = 170000000; + cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | + V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT; + cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | + V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM; + return 0; +} + +static const struct v4l2_subdev_video_ops ad9389b_video_ops = { + .s_stream = ad9389b_s_stream, + .s_dv_timings = ad9389b_s_dv_timings, + .g_dv_timings = ad9389b_g_dv_timings, + .enum_dv_timings = ad9389b_enum_dv_timings, + .dv_timings_cap = ad9389b_dv_timings_cap, +}; + +static int ad9389b_s_audio_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + + if (enable) + ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x80); + else + ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x40); + + return 0; +} + +static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 N; + + switch (freq) { + case 32000: N = 4096; break; + case 44100: N = 6272; break; + case 48000: N = 6144; break; + case 88200: N = 12544; break; + case 96000: N = 12288; break; + case 176400: N = 25088; break; + case 192000: N = 24576; break; + default: + return -EINVAL; + } + + /* Set N (used with CTS to regenerate the audio clock) */ + ad9389b_wr(sd, 0x01, (N >> 16) & 0xf); + ad9389b_wr(sd, 0x02, (N >> 8) & 0xff); + ad9389b_wr(sd, 0x03, N & 0xff); + + return 0; +} + +static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 i2s_sf; + + switch (freq) { + case 32000: i2s_sf = 0x30; break; + case 44100: i2s_sf = 0x00; break; + case 48000: i2s_sf = 0x20; break; + case 88200: i2s_sf = 0x80; break; + case 96000: i2s_sf = 0xa0; break; + case 176400: i2s_sf = 0xc0; break; + case 192000: i2s_sf = 0xe0; break; + default: + return -EINVAL; + } + + /* Set sampling frequency for I2S audio to 48 kHz */ + ad9389b_wr_and_or(sd, 0x15, 0xf, i2s_sf); + + return 0; +} + +static int ad9389b_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) +{ + /* TODO based on input/output/config */ + /* TODO See datasheet "Programmers guide" p. 39-40 */ + + /* Only 2 channels in use for application */ + ad9389b_wr_and_or(sd, 0x50, 0x1f, 0x20); + /* Speaker mapping */ + ad9389b_wr(sd, 0x51, 0x00); + + /* TODO Where should this be placed? */ + /* 16 bit audio word length */ + ad9389b_wr_and_or(sd, 0x14, 0xf0, 0x02); + + return 0; +} + +static const struct v4l2_subdev_audio_ops ad9389b_audio_ops = { + .s_stream = ad9389b_s_audio_stream, + .s_clock_freq = ad9389b_s_clock_freq, + .s_i2s_clock_freq = ad9389b_s_i2s_clock_freq, + .s_routing = ad9389b_s_routing, +}; + +/* --------------------- SUBDEV OPS --------------------------------------- */ + +static const struct v4l2_subdev_ops ad9389b_ops = { + .core = &ad9389b_core_ops, + .video = &ad9389b_video_ops, + .audio = &ad9389b_audio_ops, + .pad = &ad9389b_pad_ops, +}; + +/* ----------------------------------------------------------------------- */ +static void ad9389b_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, + int segment, u8 *buf) +{ + int i, j; + + if (debug < lvl) + return; + + v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment); + for (i = 0; i < 256; i += 16) { + u8 b[128]; + u8 *bp = b; + + if (i == 128) + v4l2_dbg(lvl, debug, sd, "\n"); + for (j = i; j < i + 16; j++) { + sprintf(bp, "0x%02x, ", buf[j]); + bp += 6; + } + bp[0] = '\0'; + v4l2_dbg(lvl, debug, sd, "%s\n", b); + } +} + +static void ad9389b_edid_handler(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct ad9389b_state *state = container_of(dwork, + struct ad9389b_state, edid_handler); + struct v4l2_subdev *sd = &state->sd; + struct ad9389b_edid_detect ed; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (ad9389b_check_edid_status(sd)) { + /* Return if we received the EDID. */ + return; + } + + if (ad9389b_have_hotplug(sd)) { + /* We must retry reading the EDID several times, it is possible + * that initially the EDID couldn't be read due to i2c errors + * (DVI connectors are particularly prone to this problem). */ + if (state->edid.read_retries) { + state->edid.read_retries--; + /* EDID read failed, trigger a retry */ + ad9389b_wr(sd, 0xc9, 0xf); + queue_delayed_work(state->work_queue, + &state->edid_handler, EDID_DELAY); + return; + } + } + + /* We failed to read the EDID, so send an event for this. */ + ed.present = false; + ed.segment = ad9389b_rd(sd, 0xc4); + v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); + v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); +} + +static void ad9389b_audio_setup(struct v4l2_subdev *sd) +{ + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + ad9389b_s_i2s_clock_freq(sd, 48000); + ad9389b_s_clock_freq(sd, 48000); + ad9389b_s_routing(sd, 0, 0, 0); +} + +/* Initial setup of AD9389b */ + +/* Configure hdmi transmitter. */ +static void ad9389b_setup(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* Input format: RGB 4:4:4 */ + ad9389b_wr_and_or(sd, 0x15, 0xf1, 0x0); + /* Output format: RGB 4:4:4 */ + ad9389b_wr_and_or(sd, 0x16, 0x3f, 0x0); + /* CSC fixed point: +/-2, 1st order interpolation 4:2:2 -> 4:4:4 up + conversion, Aspect ratio: 16:9 */ + ad9389b_wr_and_or(sd, 0x17, 0xe1, 0x0e); + /* Disable pixel repetition and CSC */ + ad9389b_wr_and_or(sd, 0x3b, 0x9e, 0x0); + /* Output format: RGB 4:4:4, Active Format Information is valid. */ + ad9389b_wr_and_or(sd, 0x45, 0xc7, 0x08); + /* Underscanned */ + ad9389b_wr_and_or(sd, 0x46, 0x3f, 0x80); + /* Setup video format */ + ad9389b_wr(sd, 0x3c, 0x0); + /* Active format aspect ratio: same as picure. */ + ad9389b_wr(sd, 0x47, 0x80); + /* No encryption */ + ad9389b_wr_and_or(sd, 0xaf, 0xef, 0x0); + /* Positive clk edge capture for input video clock */ + ad9389b_wr_and_or(sd, 0xba, 0x1f, 0x60); + + ad9389b_audio_setup(sd); + + v4l2_ctrl_handler_setup(&state->hdl); + + ad9389b_set_IT_content_AVI_InfoFrame(sd); +} + +static void ad9389b_notify_monitor_detect(struct v4l2_subdev *sd) +{ + struct ad9389b_monitor_detect mdt; + struct ad9389b_state *state = get_ad9389b_state(sd); + + mdt.present = state->have_monitor; + v4l2_subdev_notify(sd, AD9389B_MONITOR_DETECT, (void *)&mdt); +} + +static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + /* read hotplug and rx-sense state */ + u8 status = ad9389b_rd(sd, 0x42); + + v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n", + __func__, + status, + status & MASK_AD9389B_HPD_DETECT ? ", hotplug" : "", + status & MASK_AD9389B_MSEN_DETECT ? ", rx-sense" : ""); + + if ((status & MASK_AD9389B_HPD_DETECT) && + ((status & MASK_AD9389B_MSEN_DETECT) || state->edid.segments)) { + v4l2_dbg(1, debug, sd, + "%s: hotplug and (rx-sense or edid)\n", __func__); + if (!state->have_monitor) { + v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__); + state->have_monitor = true; + ad9389b_set_isr(sd, true); + if (!ad9389b_s_power(sd, true)) { + v4l2_dbg(1, debug, sd, + "%s: monitor detected, powerup failed\n", __func__); + return; + } + ad9389b_setup(sd); + ad9389b_notify_monitor_detect(sd); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, + &state->edid_handler, EDID_DELAY); + } + } else if (status & MASK_AD9389B_HPD_DETECT) { + v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, + &state->edid_handler, EDID_DELAY); + } else if (!(status & MASK_AD9389B_HPD_DETECT)) { + v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__); + if (state->have_monitor) { + v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__); + state->have_monitor = false; + ad9389b_notify_monitor_detect(sd); + } + ad9389b_s_power(sd, false); + memset(&state->edid, 0, sizeof(struct ad9389b_state_edid)); + } + + /* update read only ctrls */ + v4l2_ctrl_s_ctrl(state->hotplug_ctrl, ad9389b_have_hotplug(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, ad9389b_have_rx_sense(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); +} + +static bool edid_block_verify_crc(u8 *edid_block) +{ + int i; + u8 sum = 0; + + for (i = 0; i < 127; i++) + sum += *(edid_block + i); + return ((255 - sum + 1) == edid_block[127]); +} + +static bool edid_segment_verify_crc(struct v4l2_subdev *sd, u32 segment) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + u32 blocks = state->edid.blocks; + u8 *data = state->edid.data; + + if (edid_block_verify_crc(&data[segment * 256])) { + if ((segment + 1) * 2 <= blocks) + return edid_block_verify_crc(&data[segment * 256 + 128]); + return true; + } + return false; +} + +static bool ad9389b_check_edid_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_edid_detect ed; + int segment; + u8 edidRdy = ad9389b_rd(sd, 0xc5); + + v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", + __func__, EDID_MAX_RETRIES - state->edid.read_retries); + + if (!(edidRdy & MASK_AD9389B_EDID_RDY)) + return false; + + segment = ad9389b_rd(sd, 0xc4); + if (segment >= EDID_MAX_SEGM) { + v4l2_err(sd, "edid segment number too big\n"); + return false; + } + v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment); + ad9389b_edid_rd(sd, 256, &state->edid.data[segment * 256]); + ad9389b_dbg_dump_edid(2, debug, sd, segment, + &state->edid.data[segment * 256]); + if (segment == 0) { + state->edid.blocks = state->edid.data[0x7e] + 1; + v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", + __func__, state->edid.blocks); + } + if (!edid_segment_verify_crc(sd, segment)) { + /* edid crc error, force reread of edid segment */ + ad9389b_s_power(sd, false); + ad9389b_s_power(sd, true); + return false; + } + /* one more segment read ok */ + state->edid.segments = segment + 1; + if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) { + /* Request next EDID segment */ + v4l2_dbg(1, debug, sd, "%s: request segment %d\n", + __func__, state->edid.segments); + ad9389b_wr(sd, 0xc9, 0xf); + ad9389b_wr(sd, 0xc4, state->edid.segments); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, + &state->edid_handler, EDID_DELAY); + return false; + } + + /* report when we have all segments but report only for segment 0 */ + ed.present = true; + ed.segment = 0; + v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); + state->edid_detect_counter++; + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); + return ed.present; +} + +/* ----------------------------------------------------------------------- */ + +static void ad9389b_init_setup(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_state_edid *edid = &state->edid; + + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* clear all interrupts */ + ad9389b_wr(sd, 0x96, 0xff); + + memset(edid, 0, sizeof(struct ad9389b_state_edid)); + state->have_monitor = false; + ad9389b_set_isr(sd, false); +} + +static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + const struct v4l2_dv_timings dv1080p60 = V4L2_DV_BT_CEA_1920X1080P60; + struct ad9389b_state *state; + struct ad9389b_platform_data *pdata = client->dev.platform_data; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + int err = -EIO; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_dbg(1, debug, client, "detecting ad9389b client on address 0x%x\n", + client->addr << 1); + + state = kzalloc(sizeof(struct ad9389b_state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + /* Platform data */ + if (pdata == NULL) { + v4l_err(client, "No platform data!\n"); + err = -ENODEV; + goto err_free; + } + memcpy(&state->pdata, pdata, sizeof(state->pdata)); + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &ad9389b_ops); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 5); + + /* private controls */ + + state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, + V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI, + 0, V4L2_DV_TX_MODE_DVI_D); + state->hdmi_mode_ctrl->is_private = true; + state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0); + state->hotplug_ctrl->is_private = true; + state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0); + state->rx_sense_ctrl->is_private = true; + state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0); + state->have_edid0_ctrl->is_private = true; + state->rgb_quantization_range_ctrl = + v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, + V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, + 0, V4L2_DV_RGB_RANGE_AUTO); + state->rgb_quantization_range_ctrl->is_private = true; + sd->ctrl_handler = hdl; + if (hdl->error) { + err = hdl->error; + + goto err_hdl; + } + + state->pad.flags = MEDIA_PAD_FL_SINK; + err = media_entity_init(&sd->entity, 1, &state->pad, 0); + if (err) + goto err_hdl; + + state->chip_revision = ad9389b_rd(sd, 0x0); + if (state->chip_revision != 2) { + v4l2_err(sd, "chip_revision %d != 2\n", state->chip_revision); + err = -EIO; + goto err_entity; + } + v4l2_dbg(1, debug, sd, "reg 0x41 0x%x, chip version (reg 0x00) 0x%x\n", + ad9389b_rd(sd, 0x41), state->chip_revision); + + state->edid_i2c_client = i2c_new_dummy(client->adapter, (0x7e>>1)); + if (state->edid_i2c_client == NULL) { + v4l2_err(sd, "failed to register edid i2c client\n"); + goto err_entity; + } + + state->work_queue = create_singlethread_workqueue(sd->name); + if (state->work_queue == NULL) { + v4l2_err(sd, "could not create workqueue\n"); + goto err_unreg; + } + + INIT_DELAYED_WORK(&state->edid_handler, ad9389b_edid_handler); + state->dv_timings = dv1080p60; + + ad9389b_init_setup(sd); + ad9389b_set_isr(sd, true); + + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + return 0; + +err_unreg: + i2c_unregister_device(state->edid_i2c_client); +err_entity: + media_entity_cleanup(&sd->entity); +err_hdl: + v4l2_ctrl_handler_free(&state->hdl); +err_free: + kfree(state); + return err; +} + +/* ----------------------------------------------------------------------- */ + +static int ad9389b_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ad9389b_state *state = get_ad9389b_state(sd); + + state->chip_revision = -1; + + v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + + ad9389b_s_stream(sd, false); + ad9389b_s_audio_stream(sd, false); + ad9389b_init_setup(sd); + cancel_delayed_work(&state->edid_handler); + i2c_unregister_device(state->edid_i2c_client); + destroy_workqueue(state->work_queue); + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(sd->ctrl_handler); + kfree(get_ad9389b_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_device_id ad9389b_id[] = { + { "ad9389b", V4L2_IDENT_AD9389B }, + { "ad9889b", V4L2_IDENT_AD9389B }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad9389b_id); + +static struct i2c_driver ad9389b_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ad9389b", + }, + .probe = ad9389b_probe, + .remove = ad9389b_remove, + .id_table = ad9389b_id, +}; + +module_i2c_driver(ad9389b_driver); diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c new file mode 100644 index 00000000..ef75abe5 --- /dev/null +++ b/drivers/media/i2c/adp1653.c @@ -0,0 +1,487 @@ +/* + * drivers/media/i2c/adp1653.c + * + * Copyright (C) 2008--2011 Nokia Corporation + * + * Contact: Sakari Ailus + * + * Contributors: + * Sakari Ailus + * Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * TODO: + * - fault interrupt handling + * - hardware strobe + * - power doesn't need to be ON if all lights are off + * + */ + +#include +#include +#include +#include +#include +#include + +#define TIMEOUT_MAX 820000 +#define TIMEOUT_STEP 54600 +#define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \ + * TIMEOUT_STEP) +#define TIMEOUT_US_TO_CODE(t) ((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \ + / TIMEOUT_STEP) +#define TIMEOUT_CODE_TO_US(c) (TIMEOUT_MAX - (c) * TIMEOUT_STEP) + +/* Write values into ADP1653 registers. */ +static int adp1653_update_hw(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + u8 out_sel; + u8 config = 0; + int rval; + + out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( + flash->indicator_intensity->val) + << ADP1653_REG_OUT_SEL_ILED_SHIFT; + + switch (flash->led_mode->val) { + case V4L2_FLASH_LED_MODE_NONE: + break; + case V4L2_FLASH_LED_MODE_FLASH: + /* Flash mode, light on with strobe, duration from timer */ + config = ADP1653_REG_CONFIG_TMR_CFG; + config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val) + << ADP1653_REG_CONFIG_TMR_SET_SHIFT; + break; + case V4L2_FLASH_LED_MODE_TORCH: + /* Torch mode, light immediately on, duration indefinite */ + out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( + flash->torch_intensity->val) + << ADP1653_REG_OUT_SEL_HPLED_SHIFT; + break; + } + + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); + if (rval < 0) + return rval; + + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config); + if (rval < 0) + return rval; + + return 0; +} + +static int adp1653_get_fault(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int fault; + int rval; + + fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT); + if (IS_ERR_VALUE(fault)) + return fault; + + flash->fault |= fault; + + if (!flash->fault) + return 0; + + /* Clear faults. */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); + if (IS_ERR_VALUE(rval)) + return rval; + + flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE; + + rval = adp1653_update_hw(flash); + if (IS_ERR_VALUE(rval)) + return rval; + + return flash->fault; +} + +static int adp1653_strobe(struct adp1653_flash *flash, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( + flash->indicator_intensity->val) + << ADP1653_REG_OUT_SEL_ILED_SHIFT; + int rval; + + if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + if (!enable) + return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, + out_sel); + + out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( + flash->flash_intensity->val) + << ADP1653_REG_OUT_SEL_HPLED_SHIFT; + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); + if (rval) + return rval; + + /* Software strobe using i2c */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, + ADP1653_REG_SW_STROBE_SW_STROBE); + if (rval) + return rval; + return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0); +} + +/* -------------------------------------------------------------------------- + * V4L2 controls + */ + +static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl) +{ + struct adp1653_flash *flash = + container_of(ctrl->handler, struct adp1653_flash, ctrls); + int rval; + + rval = adp1653_get_fault(flash); + if (IS_ERR_VALUE(rval)) + return rval; + + ctrl->cur.val = 0; + + if (flash->fault & ADP1653_REG_FAULT_FLT_SCP) + ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; + if (flash->fault & ADP1653_REG_FAULT_FLT_OT) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; + if (flash->fault & ADP1653_REG_FAULT_FLT_TMR) + ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; + if (flash->fault & ADP1653_REG_FAULT_FLT_OV) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; + + flash->fault = 0; + + return 0; +} + +static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct adp1653_flash *flash = + container_of(ctrl->handler, struct adp1653_flash, ctrls); + int rval; + + rval = adp1653_get_fault(flash); + if (IS_ERR_VALUE(rval)) + return rval; + if ((rval & (ADP1653_REG_FAULT_FLT_SCP | + ADP1653_REG_FAULT_FLT_OT | + ADP1653_REG_FAULT_FLT_OV)) && + (ctrl->id == V4L2_CID_FLASH_STROBE || + ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY || + ctrl->id == V4L2_CID_FLASH_LED_MODE)) + return -EBUSY; + + switch (ctrl->id) { + case V4L2_CID_FLASH_STROBE: + return adp1653_strobe(flash, 1); + case V4L2_CID_FLASH_STROBE_STOP: + return adp1653_strobe(flash, 0); + } + + return adp1653_update_hw(flash); +} + +static const struct v4l2_ctrl_ops adp1653_ctrl_ops = { + .g_volatile_ctrl = adp1653_get_ctrl, + .s_ctrl = adp1653_set_ctrl, +}; + +static int adp1653_init_controls(struct adp1653_flash *flash) +{ + struct v4l2_ctrl *fault; + + v4l2_ctrl_handler_init(&flash->ctrls, 9); + + flash->led_mode = + v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_LED_MODE, + V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0); + v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE_SOURCE, + V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0); + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); + flash->flash_timeout = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN, + flash->platform_data->max_flash_timeout, + TIMEOUT_STEP, + flash->platform_data->max_flash_timeout); + flash->flash_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_INTENSITY, + ADP1653_FLASH_INTENSITY_MIN, + flash->platform_data->max_flash_intensity, + 1, flash->platform_data->max_flash_intensity); + flash->torch_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_TORCH_INTENSITY, + ADP1653_TORCH_INTENSITY_MIN, + flash->platform_data->max_torch_intensity, + ADP1653_FLASH_INTENSITY_STEP, + flash->platform_data->max_torch_intensity); + flash->indicator_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_INDICATOR_INTENSITY, + ADP1653_INDICATOR_INTENSITY_MIN, + flash->platform_data->max_indicator_intensity, + ADP1653_INDICATOR_INTENSITY_STEP, + ADP1653_INDICATOR_INTENSITY_MIN); + fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_FAULT, 0, + V4L2_FLASH_FAULT_OVER_VOLTAGE + | V4L2_FLASH_FAULT_OVER_TEMPERATURE + | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); + + if (flash->ctrls.error) + return flash->ctrls.error; + + fault->flags |= V4L2_CTRL_FLAG_VOLATILE; + + flash->subdev.ctrl_handler = &flash->ctrls; + return 0; +} + +/* -------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static int +adp1653_init_device(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + /* Clear FAULT register by writing zero to OUT_SEL */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); + if (rval < 0) { + dev_err(&client->dev, "failed writing fault register\n"); + return -EIO; + } + + mutex_lock(flash->ctrls.lock); + /* Reset faults before reading new ones. */ + flash->fault = 0; + rval = adp1653_get_fault(flash); + mutex_unlock(flash->ctrls.lock); + if (rval > 0) { + dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval); + return -EIO; + } + + mutex_lock(flash->ctrls.lock); + rval = adp1653_update_hw(flash); + mutex_unlock(flash->ctrls.lock); + if (rval) { + dev_err(&client->dev, + "adp1653_update_hw failed at %s\n", __func__); + return -EIO; + } + + return 0; +} + +static int +__adp1653_set_power(struct adp1653_flash *flash, int on) +{ + int ret; + + ret = flash->platform_data->power(&flash->subdev, on); + if (ret < 0) + return ret; + + if (!on) + return 0; + + ret = adp1653_init_device(flash); + if (ret < 0) + flash->platform_data->power(&flash->subdev, 0); + + return ret; +} + +static int +adp1653_set_power(struct v4l2_subdev *subdev, int on) +{ + struct adp1653_flash *flash = to_adp1653_flash(subdev); + int ret = 0; + + mutex_lock(&flash->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (flash->power_count == !on) { + ret = __adp1653_set_power(flash, !!on); + if (ret < 0) + goto done; + } + + /* Update the power count. */ + flash->power_count += on ? 1 : -1; + WARN_ON(flash->power_count < 0); + +done: + mutex_unlock(&flash->power_lock); + return ret; +} + +static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return adp1653_set_power(sd, 1); +} + +static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return adp1653_set_power(sd, 0); +} + +static const struct v4l2_subdev_core_ops adp1653_core_ops = { + .s_power = adp1653_set_power, +}; + +static const struct v4l2_subdev_ops adp1653_ops = { + .core = &adp1653_core_ops, +}; + +static const struct v4l2_subdev_internal_ops adp1653_internal_ops = { + .open = adp1653_open, + .close = adp1653_close, +}; + +/* -------------------------------------------------------------------------- + * I2C driver + */ +#ifdef CONFIG_PM + +static int adp1653_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + if (!flash->power_count) + return 0; + + return __adp1653_set_power(flash, 0); +} + +static int adp1653_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + if (!flash->power_count) + return 0; + + return __adp1653_set_power(flash, 1); +} + +#else + +#define adp1653_suspend NULL +#define adp1653_resume NULL + +#endif /* CONFIG_PM */ + +static int adp1653_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct adp1653_flash *flash; + int ret; + + /* we couldn't work without platform data */ + if (client->dev.platform_data == NULL) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_KERNEL); + if (flash == NULL) + return -ENOMEM; + + flash->platform_data = client->dev.platform_data; + + mutex_init(&flash->power_lock); + + v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops); + flash->subdev.internal_ops = &adp1653_internal_ops; + flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + ret = adp1653_init_controls(flash); + if (ret) + goto free_and_quit; + + ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); + if (ret < 0) + goto free_and_quit; + + flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + + return 0; + +free_and_quit: + v4l2_ctrl_handler_free(&flash->ctrls); + kfree(flash); + return ret; +} + +static int adp1653_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + v4l2_device_unregister_subdev(&flash->subdev); + v4l2_ctrl_handler_free(&flash->ctrls); + media_entity_cleanup(&flash->subdev.entity); + kfree(flash); + return 0; +} + +static const struct i2c_device_id adp1653_id_table[] = { + { ADP1653_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp1653_id_table); + +static struct dev_pm_ops adp1653_pm_ops = { + .suspend = adp1653_suspend, + .resume = adp1653_resume, +}; + +static struct i2c_driver adp1653_i2c_driver = { + .driver = { + .name = ADP1653_NAME, + .pm = &adp1653_pm_ops, + }, + .probe = adp1653_probe, + .remove = adp1653_remove, + .id_table = adp1653_id_table, +}; + +module_i2c_driver(adp1653_i2c_driver); + +MODULE_AUTHOR("Sakari Ailus "); +MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/adv7170.c b/drivers/media/i2c/adv7170.c new file mode 100644 index 00000000..6bc01fb9 --- /dev/null +++ b/drivers/media/i2c/adv7170.c @@ -0,0 +1,410 @@ +/* + * adv7170 - adv7170, adv7171 video encoder driver version 0.0.1 + * + * Copyright (C) 2002 Maxim Yevtyushkin + * + * Based on adv7176 driver by: + * + * Copyright (C) 1998 Dave Perks + * Copyright (C) 1999 Wolfgang Scherr + * Copyright (C) 2000 Serguei Miridonov + * - some corrections for Pinnacle Systems Inc. DC10plus card. + * + * Changes by Ronald Bultje + * - moved over to linux>=2.4.x i2c protocol (1/1/2003) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Analog Devices ADV7170 video encoder driver"); +MODULE_AUTHOR("Maxim Yevtyushkin"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* ----------------------------------------------------------------------- */ + +struct adv7170 { + struct v4l2_subdev sd; + unsigned char reg[128]; + + v4l2_std_id norm; + int input; +}; + +static inline struct adv7170 *to_adv7170(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7170, sd); +} + +static char *inputs[] = { "pass_through", "play_back" }; + +static enum v4l2_mbus_pixelcode adv7170_codes[] = { + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_UYVY8_1X16, +}; + +/* ----------------------------------------------------------------------- */ + +static inline int adv7170_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct adv7170 *encoder = to_adv7170(sd); + + encoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int adv7170_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int adv7170_write_block(struct v4l2_subdev *sd, + const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct adv7170 *encoder = to_adv7170(sd); + int ret = -1; + u8 reg; + + /* the adv7170 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + u8 block_data[32]; + int block_len; + + while (len >= 2) { + block_len = 0; + block_data[block_len++] = reg = data[0]; + do { + block_data[block_len++] = + encoder->reg[reg++] = data[1]; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + ret = adv7170_write(sd, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + } + return ret; +} + +/* ----------------------------------------------------------------------- */ + +#define TR0MODE 0x4c +#define TR0RST 0x80 + +#define TR1CAPT 0x00 +#define TR1PLAY 0x00 + +static const unsigned char init_NTSC[] = { + 0x00, 0x10, /* MR0 */ + 0x01, 0x20, /* MR1 */ + 0x02, 0x0e, /* MR2 RTC control: bits 2 and 1 */ + 0x03, 0x80, /* MR3 */ + 0x04, 0x30, /* MR4 */ + 0x05, 0x00, /* Reserved */ + 0x06, 0x00, /* Reserved */ + 0x07, TR0MODE, /* TM0 */ + 0x08, TR1CAPT, /* TM1 */ + 0x09, 0x16, /* Fsc0 */ + 0x0a, 0x7c, /* Fsc1 */ + 0x0b, 0xf0, /* Fsc2 */ + 0x0c, 0x21, /* Fsc3 */ + 0x0d, 0x00, /* Subcarrier Phase */ + 0x0e, 0x00, /* Closed Capt. Ext 0 */ + 0x0f, 0x00, /* Closed Capt. Ext 1 */ + 0x10, 0x00, /* Closed Capt. 0 */ + 0x11, 0x00, /* Closed Capt. 1 */ + 0x12, 0x00, /* Pedestal Ctl 0 */ + 0x13, 0x00, /* Pedestal Ctl 1 */ + 0x14, 0x00, /* Pedestal Ctl 2 */ + 0x15, 0x00, /* Pedestal Ctl 3 */ + 0x16, 0x00, /* CGMS_WSS_0 */ + 0x17, 0x00, /* CGMS_WSS_1 */ + 0x18, 0x00, /* CGMS_WSS_2 */ + 0x19, 0x00, /* Teletext Ctl */ +}; + +static const unsigned char init_PAL[] = { + 0x00, 0x71, /* MR0 */ + 0x01, 0x20, /* MR1 */ + 0x02, 0x0e, /* MR2 RTC control: bits 2 and 1 */ + 0x03, 0x80, /* MR3 */ + 0x04, 0x30, /* MR4 */ + 0x05, 0x00, /* Reserved */ + 0x06, 0x00, /* Reserved */ + 0x07, TR0MODE, /* TM0 */ + 0x08, TR1CAPT, /* TM1 */ + 0x09, 0xcb, /* Fsc0 */ + 0x0a, 0x8a, /* Fsc1 */ + 0x0b, 0x09, /* Fsc2 */ + 0x0c, 0x2a, /* Fsc3 */ + 0x0d, 0x00, /* Subcarrier Phase */ + 0x0e, 0x00, /* Closed Capt. Ext 0 */ + 0x0f, 0x00, /* Closed Capt. Ext 1 */ + 0x10, 0x00, /* Closed Capt. 0 */ + 0x11, 0x00, /* Closed Capt. 1 */ + 0x12, 0x00, /* Pedestal Ctl 0 */ + 0x13, 0x00, /* Pedestal Ctl 1 */ + 0x14, 0x00, /* Pedestal Ctl 2 */ + 0x15, 0x00, /* Pedestal Ctl 3 */ + 0x16, 0x00, /* CGMS_WSS_0 */ + 0x17, 0x00, /* CGMS_WSS_1 */ + 0x18, 0x00, /* CGMS_WSS_2 */ + 0x19, 0x00, /* Teletext Ctl */ +}; + + +static int adv7170_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7170 *encoder = to_adv7170(sd); + + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + if (std & V4L2_STD_NTSC) { + adv7170_write_block(sd, init_NTSC, sizeof(init_NTSC)); + if (encoder->input == 0) + adv7170_write(sd, 0x02, 0x0e); /* Enable genlock */ + adv7170_write(sd, 0x07, TR0MODE | TR0RST); + adv7170_write(sd, 0x07, TR0MODE); + } else if (std & V4L2_STD_PAL) { + adv7170_write_block(sd, init_PAL, sizeof(init_PAL)); + if (encoder->input == 0) + adv7170_write(sd, 0x02, 0x0e); /* Enable genlock */ + adv7170_write(sd, 0x07, TR0MODE | TR0RST); + adv7170_write(sd, 0x07, TR0MODE); + } else { + v4l2_dbg(1, debug, sd, "illegal norm: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + v4l2_dbg(1, debug, sd, "switched to %llx\n", (unsigned long long)std); + encoder->norm = std; + return 0; +} + +static int adv7170_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7170 *encoder = to_adv7170(sd); + + /* RJ: input = 0: input is from decoder + input = 1: input is from ZR36060 + input = 2: color bar */ + + v4l2_dbg(1, debug, sd, "set input from %s\n", + input == 0 ? "decoder" : "ZR36060"); + + switch (input) { + case 0: + adv7170_write(sd, 0x01, 0x20); + adv7170_write(sd, 0x08, TR1CAPT); /* TR1 */ + adv7170_write(sd, 0x02, 0x0e); /* Enable genlock */ + adv7170_write(sd, 0x07, TR0MODE | TR0RST); + adv7170_write(sd, 0x07, TR0MODE); + /* udelay(10); */ + break; + + case 1: + adv7170_write(sd, 0x01, 0x00); + adv7170_write(sd, 0x08, TR1PLAY); /* TR1 */ + adv7170_write(sd, 0x02, 0x08); + adv7170_write(sd, 0x07, TR0MODE | TR0RST); + adv7170_write(sd, 0x07, TR0MODE); + /* udelay(10); */ + break; + + default: + v4l2_dbg(1, debug, sd, "illegal input: %d\n", input); + return -EINVAL; + } + v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]); + encoder->input = input; + return 0; +} + +static int adv7170_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(adv7170_codes)) + return -EINVAL; + + *code = adv7170_codes[index]; + return 0; +} + +static int adv7170_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7170_read(sd, 0x7); + + if ((val & 0x40) == (1 << 6)) + mf->code = V4L2_MBUS_FMT_UYVY8_1X16; + else + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + + mf->colorspace = V4L2_COLORSPACE_SMPTE170M; + mf->width = 0; + mf->height = 0; + mf->field = V4L2_FIELD_ANY; + + return 0; +} + +static int adv7170_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7170_read(sd, 0x7); + int ret; + + switch (mf->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + val &= ~0x40; + break; + + case V4L2_MBUS_FMT_UYVY8_1X16: + val |= 0x40; + break; + + default: + v4l2_dbg(1, debug, sd, + "illegal v4l2_mbus_framefmt code: %d\n", mf->code); + return -EINVAL; + } + + ret = adv7170_write(sd, 0x7, val); + + return ret; +} + +static int adv7170_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7170, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops adv7170_core_ops = { + .g_chip_ident = adv7170_g_chip_ident, +}; + +static const struct v4l2_subdev_video_ops adv7170_video_ops = { + .s_std_output = adv7170_s_std_output, + .s_routing = adv7170_s_routing, + .s_mbus_fmt = adv7170_s_fmt, + .g_mbus_fmt = adv7170_g_fmt, + .enum_mbus_fmt = adv7170_enum_fmt, +}; + +static const struct v4l2_subdev_ops adv7170_ops = { + .core = &adv7170_core_ops, + .video = &adv7170_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int adv7170_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7170 *encoder; + struct v4l2_subdev *sd; + int i; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(struct adv7170), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &adv7170_ops); + encoder->norm = V4L2_STD_NTSC; + encoder->input = 0; + + i = adv7170_write_block(sd, init_NTSC, sizeof(init_NTSC)); + if (i >= 0) { + i = adv7170_write(sd, 0x07, TR0MODE | TR0RST); + i = adv7170_write(sd, 0x07, TR0MODE); + i = adv7170_read(sd, 0x12); + v4l2_dbg(1, debug, sd, "revision %d\n", i & 1); + } + if (i < 0) + v4l2_dbg(1, debug, sd, "init error 0x%x\n", i); + return 0; +} + +static int adv7170_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_adv7170(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id adv7170_id[] = { + { "adv7170", 0 }, + { "adv7171", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7170_id); + +static struct i2c_driver adv7170_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7170", + }, + .probe = adv7170_probe, + .remove = adv7170_remove, + .id_table = adv7170_id, +}; + +module_i2c_driver(adv7170_driver); diff --git a/drivers/media/i2c/adv7175.c b/drivers/media/i2c/adv7175.c new file mode 100644 index 00000000..c7640fab --- /dev/null +++ b/drivers/media/i2c/adv7175.c @@ -0,0 +1,460 @@ +/* + * adv7175 - adv7175a video encoder driver version 0.0.3 + * + * Copyright (C) 1998 Dave Perks + * Copyright (C) 1999 Wolfgang Scherr + * Copyright (C) 2000 Serguei Miridonov + * - some corrections for Pinnacle Systems Inc. DC10plus card. + * + * Changes by Ronald Bultje + * - moved over to linux>=2.4.x i2c protocol (9/9/2002) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Analog Devices ADV7175 video encoder driver"); +MODULE_AUTHOR("Dave Perks"); +MODULE_LICENSE("GPL"); + +#define I2C_ADV7175 0xd4 +#define I2C_ADV7176 0x54 + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* ----------------------------------------------------------------------- */ + +struct adv7175 { + struct v4l2_subdev sd; + v4l2_std_id norm; + int input; +}; + +static inline struct adv7175 *to_adv7175(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7175, sd); +} + +static char *inputs[] = { "pass_through", "play_back", "color_bar" }; + +static enum v4l2_mbus_pixelcode adv7175_codes[] = { + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_UYVY8_1X16, +}; + +/* ----------------------------------------------------------------------- */ + +static inline int adv7175_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int adv7175_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int adv7175_write_block(struct v4l2_subdev *sd, + const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = -1; + u8 reg; + + /* the adv7175 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + u8 block_data[32]; + int block_len; + + while (len >= 2) { + block_len = 0; + block_data[block_len++] = reg = data[0]; + do { + block_data[block_len++] = data[1]; + reg++; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + ret = adv7175_write(sd, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + } + + return ret; +} + +static void set_subcarrier_freq(struct v4l2_subdev *sd, int pass_through) +{ + /* for some reason pass_through NTSC needs + * a different sub-carrier freq to remain stable. */ + if (pass_through) + adv7175_write(sd, 0x02, 0x00); + else + adv7175_write(sd, 0x02, 0x55); + + adv7175_write(sd, 0x03, 0x55); + adv7175_write(sd, 0x04, 0x55); + adv7175_write(sd, 0x05, 0x25); +} + +/* ----------------------------------------------------------------------- */ +/* Output filter: S-Video Composite */ + +#define MR050 0x11 /* 0x09 */ +#define MR060 0x14 /* 0x0c */ + +/* ----------------------------------------------------------------------- */ + +#define TR0MODE 0x46 +#define TR0RST 0x80 + +#define TR1CAPT 0x80 +#define TR1PLAY 0x00 + +static const unsigned char init_common[] = { + + 0x00, MR050, /* MR0, PAL enabled */ + 0x01, 0x00, /* MR1 */ + 0x02, 0x0c, /* subc. freq. */ + 0x03, 0x8c, /* subc. freq. */ + 0x04, 0x79, /* subc. freq. */ + 0x05, 0x26, /* subc. freq. */ + 0x06, 0x40, /* subc. phase */ + + 0x07, TR0MODE, /* TR0, 16bit */ + 0x08, 0x21, /* */ + 0x09, 0x00, /* */ + 0x0a, 0x00, /* */ + 0x0b, 0x00, /* */ + 0x0c, TR1CAPT, /* TR1 */ + 0x0d, 0x4f, /* MR2 */ + 0x0e, 0x00, /* */ + 0x0f, 0x00, /* */ + 0x10, 0x00, /* */ + 0x11, 0x00, /* */ +}; + +static const unsigned char init_pal[] = { + 0x00, MR050, /* MR0, PAL enabled */ + 0x01, 0x00, /* MR1 */ + 0x02, 0x0c, /* subc. freq. */ + 0x03, 0x8c, /* subc. freq. */ + 0x04, 0x79, /* subc. freq. */ + 0x05, 0x26, /* subc. freq. */ + 0x06, 0x40, /* subc. phase */ +}; + +static const unsigned char init_ntsc[] = { + 0x00, MR060, /* MR0, NTSC enabled */ + 0x01, 0x00, /* MR1 */ + 0x02, 0x55, /* subc. freq. */ + 0x03, 0x55, /* subc. freq. */ + 0x04, 0x55, /* subc. freq. */ + 0x05, 0x25, /* subc. freq. */ + 0x06, 0x1a, /* subc. phase */ +}; + +static int adv7175_init(struct v4l2_subdev *sd, u32 val) +{ + /* This is just for testing!!! */ + adv7175_write_block(sd, init_common, sizeof(init_common)); + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + return 0; +} + +static int adv7175_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7175 *encoder = to_adv7175(sd); + + if (std & V4L2_STD_NTSC) { + adv7175_write_block(sd, init_ntsc, sizeof(init_ntsc)); + if (encoder->input == 0) + adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + } else if (std & V4L2_STD_PAL) { + adv7175_write_block(sd, init_pal, sizeof(init_pal)); + if (encoder->input == 0) + adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + } else if (std & V4L2_STD_SECAM) { + /* This is an attempt to convert + * SECAM->PAL (typically it does not work + * due to genlock: when decoder is in SECAM + * and encoder in in PAL the subcarrier can + * not be syncronized with horizontal + * quency) */ + adv7175_write_block(sd, init_pal, sizeof(init_pal)); + if (encoder->input == 0) + adv7175_write(sd, 0x0d, 0x49); /* Disable genlock */ + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + } else { + v4l2_dbg(1, debug, sd, "illegal norm: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + v4l2_dbg(1, debug, sd, "switched to %llx\n", (unsigned long long)std); + encoder->norm = std; + return 0; +} + +static int adv7175_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7175 *encoder = to_adv7175(sd); + + /* RJ: input = 0: input is from decoder + input = 1: input is from ZR36060 + input = 2: color bar */ + + switch (input) { + case 0: + adv7175_write(sd, 0x01, 0x00); + + if (encoder->norm & V4L2_STD_NTSC) + set_subcarrier_freq(sd, 1); + + adv7175_write(sd, 0x0c, TR1CAPT); /* TR1 */ + if (encoder->norm & V4L2_STD_SECAM) + adv7175_write(sd, 0x0d, 0x49); /* Disable genlock */ + else + adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + /*udelay(10);*/ + break; + + case 1: + adv7175_write(sd, 0x01, 0x00); + + if (encoder->norm & V4L2_STD_NTSC) + set_subcarrier_freq(sd, 0); + + adv7175_write(sd, 0x0c, TR1PLAY); /* TR1 */ + adv7175_write(sd, 0x0d, 0x49); + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + /* udelay(10); */ + break; + + case 2: + adv7175_write(sd, 0x01, 0x80); + + if (encoder->norm & V4L2_STD_NTSC) + set_subcarrier_freq(sd, 0); + + adv7175_write(sd, 0x0d, 0x49); + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + /* udelay(10); */ + break; + + default: + v4l2_dbg(1, debug, sd, "illegal input: %d\n", input); + return -EINVAL; + } + v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]); + encoder->input = input; + return 0; +} + +static int adv7175_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(adv7175_codes)) + return -EINVAL; + + *code = adv7175_codes[index]; + return 0; +} + +static int adv7175_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7175_read(sd, 0x7); + + if ((val & 0x40) == (1 << 6)) + mf->code = V4L2_MBUS_FMT_UYVY8_1X16; + else + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + + mf->colorspace = V4L2_COLORSPACE_SMPTE170M; + mf->width = 0; + mf->height = 0; + mf->field = V4L2_FIELD_ANY; + + return 0; +} + +static int adv7175_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7175_read(sd, 0x7); + int ret; + + switch (mf->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + val &= ~0x40; + break; + + case V4L2_MBUS_FMT_UYVY8_1X16: + val |= 0x40; + break; + + default: + v4l2_dbg(1, debug, sd, + "illegal v4l2_mbus_framefmt code: %d\n", mf->code); + return -EINVAL; + } + + ret = adv7175_write(sd, 0x7, val); + + return ret; +} + +static int adv7175_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7175, 0); +} + +static int adv7175_s_power(struct v4l2_subdev *sd, int on) +{ + if (on) + adv7175_write(sd, 0x01, 0x00); + else + adv7175_write(sd, 0x01, 0x78); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops adv7175_core_ops = { + .g_chip_ident = adv7175_g_chip_ident, + .init = adv7175_init, + .s_power = adv7175_s_power, +}; + +static const struct v4l2_subdev_video_ops adv7175_video_ops = { + .s_std_output = adv7175_s_std_output, + .s_routing = adv7175_s_routing, + .s_mbus_fmt = adv7175_s_fmt, + .g_mbus_fmt = adv7175_g_fmt, + .enum_mbus_fmt = adv7175_enum_fmt, +}; + +static const struct v4l2_subdev_ops adv7175_ops = { + .core = &adv7175_core_ops, + .video = &adv7175_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int adv7175_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i; + struct adv7175 *encoder; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(struct adv7175), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &adv7175_ops); + encoder->norm = V4L2_STD_NTSC; + encoder->input = 0; + + i = adv7175_write_block(sd, init_common, sizeof(init_common)); + if (i >= 0) { + i = adv7175_write(sd, 0x07, TR0MODE | TR0RST); + i = adv7175_write(sd, 0x07, TR0MODE); + i = adv7175_read(sd, 0x12); + v4l2_dbg(1, debug, sd, "revision %d\n", i & 1); + } + if (i < 0) + v4l2_dbg(1, debug, sd, "init error 0x%x\n", i); + return 0; +} + +static int adv7175_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_adv7175(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id adv7175_id[] = { + { "adv7175", 0 }, + { "adv7176", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7175_id); + +static struct i2c_driver adv7175_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7175", + }, + .probe = adv7175_probe, + .remove = adv7175_remove, + .id_table = adv7175_id, +}; + +module_i2c_driver(adv7175_driver); diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c new file mode 100644 index 00000000..afd561ab --- /dev/null +++ b/drivers/media/i2c/adv7180.c @@ -0,0 +1,668 @@ +/* + * adv7180.c Analog Devices ADV7180 video decoder driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ADV7180_INPUT_CONTROL_REG 0x00 +#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM 0x00 +#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10 +#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_J_SECAM 0x20 +#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_M_SECAM 0x30 +#define ADV7180_INPUT_CONTROL_NTSC_J 0x40 +#define ADV7180_INPUT_CONTROL_NTSC_M 0x50 +#define ADV7180_INPUT_CONTROL_PAL60 0x60 +#define ADV7180_INPUT_CONTROL_NTSC_443 0x70 +#define ADV7180_INPUT_CONTROL_PAL_BG 0x80 +#define ADV7180_INPUT_CONTROL_PAL_N 0x90 +#define ADV7180_INPUT_CONTROL_PAL_M 0xa0 +#define ADV7180_INPUT_CONTROL_PAL_M_PED 0xb0 +#define ADV7180_INPUT_CONTROL_PAL_COMB_N 0xc0 +#define ADV7180_INPUT_CONTROL_PAL_COMB_N_PED 0xd0 +#define ADV7180_INPUT_CONTROL_PAL_SECAM 0xe0 +#define ADV7180_INPUT_CONTROL_PAL_SECAM_PED 0xf0 +#define ADV7180_INPUT_CONTROL_INSEL_MASK 0x0f + +#define ADV7180_EXTENDED_OUTPUT_CONTROL_REG 0x04 +#define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS 0xC5 + +#define ADV7180_AUTODETECT_ENABLE_REG 0x07 +#define ADV7180_AUTODETECT_DEFAULT 0x7f +/* Contrast */ +#define ADV7180_CON_REG 0x08 /*Unsigned */ +#define ADV7180_CON_MIN 0 +#define ADV7180_CON_DEF 128 +#define ADV7180_CON_MAX 255 +/* Brightness*/ +#define ADV7180_BRI_REG 0x0a /*Signed */ +#define ADV7180_BRI_MIN -128 +#define ADV7180_BRI_DEF 0 +#define ADV7180_BRI_MAX 127 +/* Hue */ +#define ADV7180_HUE_REG 0x0b /*Signed, inverted */ +#define ADV7180_HUE_MIN -127 +#define ADV7180_HUE_DEF 0 +#define ADV7180_HUE_MAX 128 + +#define ADV7180_ADI_CTRL_REG 0x0e +#define ADV7180_ADI_CTRL_IRQ_SPACE 0x20 + +#define ADV7180_PWR_MAN_REG 0x0f +#define ADV7180_PWR_MAN_ON 0x04 +#define ADV7180_PWR_MAN_OFF 0x24 +#define ADV7180_PWR_MAN_RES 0x80 + +#define ADV7180_STATUS1_REG 0x10 +#define ADV7180_STATUS1_IN_LOCK 0x01 +#define ADV7180_STATUS1_AUTOD_MASK 0x70 +#define ADV7180_STATUS1_AUTOD_NTSM_M_J 0x00 +#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10 +#define ADV7180_STATUS1_AUTOD_PAL_M 0x20 +#define ADV7180_STATUS1_AUTOD_PAL_60 0x30 +#define ADV7180_STATUS1_AUTOD_PAL_B_G 0x40 +#define ADV7180_STATUS1_AUTOD_SECAM 0x50 +#define ADV7180_STATUS1_AUTOD_PAL_COMB 0x60 +#define ADV7180_STATUS1_AUTOD_SECAM_525 0x70 + +#define ADV7180_IDENT_REG 0x11 +#define ADV7180_ID_7180 0x18 + +#define ADV7180_ICONF1_ADI 0x40 +#define ADV7180_ICONF1_ACTIVE_LOW 0x01 +#define ADV7180_ICONF1_PSYNC_ONLY 0x10 +#define ADV7180_ICONF1_ACTIVE_TO_CLR 0xC0 +/* Saturation */ +#define ADV7180_SD_SAT_CB_REG 0xe3 /*Unsigned */ +#define ADV7180_SD_SAT_CR_REG 0xe4 /*Unsigned */ +#define ADV7180_SAT_MIN 0 +#define ADV7180_SAT_DEF 128 +#define ADV7180_SAT_MAX 255 + +#define ADV7180_IRQ1_LOCK 0x01 +#define ADV7180_IRQ1_UNLOCK 0x02 +#define ADV7180_ISR1_ADI 0x42 +#define ADV7180_ICR1_ADI 0x43 +#define ADV7180_IMR1_ADI 0x44 +#define ADV7180_IMR2_ADI 0x48 +#define ADV7180_IRQ3_AD_CHANGE 0x08 +#define ADV7180_ISR3_ADI 0x4A +#define ADV7180_ICR3_ADI 0x4B +#define ADV7180_IMR3_ADI 0x4C +#define ADV7180_IMR4_ADI 0x50 + +#define ADV7180_NTSC_V_BIT_END_REG 0xE6 +#define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND 0x4F + +struct adv7180_state { + struct v4l2_ctrl_handler ctrl_hdl; + struct v4l2_subdev sd; + struct work_struct work; + struct mutex mutex; /* mutual excl. when accessing chip */ + int irq; + v4l2_std_id curr_norm; + bool autodetect; + u8 input; +}; +#define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler, \ + struct adv7180_state, \ + ctrl_hdl)->sd) + +static v4l2_std_id adv7180_std_to_v4l2(u8 status1) +{ + /* in case V4L2_IN_ST_NO_SIGNAL */ + if (!(status1 & ADV7180_STATUS1_IN_LOCK)) + return V4L2_STD_UNKNOWN; + + switch (status1 & ADV7180_STATUS1_AUTOD_MASK) { + case ADV7180_STATUS1_AUTOD_NTSM_M_J: + return V4L2_STD_NTSC; + case ADV7180_STATUS1_AUTOD_NTSC_4_43: + return V4L2_STD_NTSC_443; + case ADV7180_STATUS1_AUTOD_PAL_M: + return V4L2_STD_PAL_M; + case ADV7180_STATUS1_AUTOD_PAL_60: + return V4L2_STD_PAL_60; + case ADV7180_STATUS1_AUTOD_PAL_B_G: + return V4L2_STD_PAL; + case ADV7180_STATUS1_AUTOD_SECAM: + return V4L2_STD_SECAM; + case ADV7180_STATUS1_AUTOD_PAL_COMB: + return V4L2_STD_PAL_Nc | V4L2_STD_PAL_N; + case ADV7180_STATUS1_AUTOD_SECAM_525: + return V4L2_STD_SECAM; + default: + return V4L2_STD_UNKNOWN; + } +} + +static int v4l2_std_to_adv7180(v4l2_std_id std) +{ + if (std == V4L2_STD_PAL_60) + return ADV7180_INPUT_CONTROL_PAL60; + if (std == V4L2_STD_NTSC_443) + return ADV7180_INPUT_CONTROL_NTSC_443; + if (std == V4L2_STD_PAL_N) + return ADV7180_INPUT_CONTROL_PAL_N; + if (std == V4L2_STD_PAL_M) + return ADV7180_INPUT_CONTROL_PAL_M; + if (std == V4L2_STD_PAL_Nc) + return ADV7180_INPUT_CONTROL_PAL_COMB_N; + + if (std & V4L2_STD_PAL) + return ADV7180_INPUT_CONTROL_PAL_BG; + if (std & V4L2_STD_NTSC) + return ADV7180_INPUT_CONTROL_NTSC_M; + if (std & V4L2_STD_SECAM) + return ADV7180_INPUT_CONTROL_PAL_SECAM; + + return -EINVAL; +} + +static u32 adv7180_status_to_v4l2(u8 status1) +{ + if (!(status1 & ADV7180_STATUS1_IN_LOCK)) + return V4L2_IN_ST_NO_SIGNAL; + + return 0; +} + +static int __adv7180_status(struct i2c_client *client, u32 *status, + v4l2_std_id *std) +{ + int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG); + + if (status1 < 0) + return status1; + + if (status) + *status = adv7180_status_to_v4l2(status1); + if (std) + *std = adv7180_std_to_v4l2(status1); + + return 0; +} + +static inline struct adv7180_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7180_state, sd); +} + +static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7180_state *state = to_state(sd); + int err = mutex_lock_interruptible(&state->mutex); + if (err) + return err; + + /* when we are interrupt driven we know the state */ + if (!state->autodetect || state->irq > 0) + *std = state->curr_norm; + else + err = __adv7180_status(v4l2_get_subdevdata(sd), NULL, std); + + mutex_unlock(&state->mutex); + return err; +} + +static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input, + u32 output, u32 config) +{ + struct adv7180_state *state = to_state(sd); + int ret = mutex_lock_interruptible(&state->mutex); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (ret) + return ret; + + /* We cannot discriminate between LQFP and 40-pin LFCSP, so accept + * all inputs and let the card driver take care of validation + */ + if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input) + goto out; + + ret = i2c_smbus_read_byte_data(client, ADV7180_INPUT_CONTROL_REG); + + if (ret < 0) + goto out; + + ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK; + ret = i2c_smbus_write_byte_data(client, + ADV7180_INPUT_CONTROL_REG, ret | input); + state->input = input; +out: + mutex_unlock(&state->mutex); + return ret; +} + +static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct adv7180_state *state = to_state(sd); + int ret = mutex_lock_interruptible(&state->mutex); + if (ret) + return ret; + + ret = __adv7180_status(v4l2_get_subdevdata(sd), status, NULL); + mutex_unlock(&state->mutex); + return ret; +} + +static int adv7180_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0); +} + +static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7180_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = mutex_lock_interruptible(&state->mutex); + if (ret) + return ret; + + /* all standards -> autodetect */ + if (std == V4L2_STD_ALL) { + ret = + i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, + ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM + | state->input); + if (ret < 0) + goto out; + + __adv7180_status(client, NULL, &state->curr_norm); + state->autodetect = true; + } else { + ret = v4l2_std_to_adv7180(std); + if (ret < 0) + goto out; + + ret = i2c_smbus_write_byte_data(client, + ADV7180_INPUT_CONTROL_REG, + ret | state->input); + if (ret < 0) + goto out; + + state->curr_norm = std; + state->autodetect = false; + } + ret = 0; +out: + mutex_unlock(&state->mutex); + return ret; +} + +static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_adv7180_sd(ctrl); + struct adv7180_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = mutex_lock_interruptible(&state->mutex); + int val; + + if (ret) + return ret; + val = ctrl->val; + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val); + break; + case V4L2_CID_HUE: + /*Hue is inverted according to HSL chart */ + ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val); + break; + case V4L2_CID_CONTRAST: + ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val); + break; + case V4L2_CID_SATURATION: + /* + *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE + *Let's not confuse the user, everybody understands saturation + */ + ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG, + val); + if (ret < 0) + break; + ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG, + val); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&state->mutex); + return ret; +} + +static const struct v4l2_ctrl_ops adv7180_ctrl_ops = { + .s_ctrl = adv7180_s_ctrl, +}; + +static int adv7180_init_controls(struct adv7180_state *state) +{ + v4l2_ctrl_handler_init(&state->ctrl_hdl, 4); + + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, + V4L2_CID_BRIGHTNESS, ADV7180_BRI_MIN, + ADV7180_BRI_MAX, 1, ADV7180_BRI_DEF); + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, + V4L2_CID_CONTRAST, ADV7180_CON_MIN, + ADV7180_CON_MAX, 1, ADV7180_CON_DEF); + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, + V4L2_CID_SATURATION, ADV7180_SAT_MIN, + ADV7180_SAT_MAX, 1, ADV7180_SAT_DEF); + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, + V4L2_CID_HUE, ADV7180_HUE_MIN, + ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF); + state->sd.ctrl_handler = &state->ctrl_hdl; + if (state->ctrl_hdl.error) { + int err = state->ctrl_hdl.error; + + v4l2_ctrl_handler_free(&state->ctrl_hdl); + return err; + } + v4l2_ctrl_handler_setup(&state->ctrl_hdl); + + return 0; +} +static void adv7180_exit_controls(struct adv7180_state *state) +{ + v4l2_ctrl_handler_free(&state->ctrl_hdl); +} + +static const struct v4l2_subdev_video_ops adv7180_video_ops = { + .querystd = adv7180_querystd, + .g_input_status = adv7180_g_input_status, + .s_routing = adv7180_s_routing, +}; + +static const struct v4l2_subdev_core_ops adv7180_core_ops = { + .g_chip_ident = adv7180_g_chip_ident, + .s_std = adv7180_s_std, +}; + +static const struct v4l2_subdev_ops adv7180_ops = { + .core = &adv7180_core_ops, + .video = &adv7180_video_ops, +}; + +static void adv7180_work(struct work_struct *work) +{ + struct adv7180_state *state = container_of(work, struct adv7180_state, + work); + struct i2c_client *client = v4l2_get_subdevdata(&state->sd); + u8 isr3; + + mutex_lock(&state->mutex); + i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, + ADV7180_ADI_CTRL_IRQ_SPACE); + isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI); + /* clear */ + i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3); + i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0); + + if (isr3 & ADV7180_IRQ3_AD_CHANGE && state->autodetect) + __adv7180_status(client, NULL, &state->curr_norm); + mutex_unlock(&state->mutex); + + enable_irq(state->irq); +} + +static irqreturn_t adv7180_irq(int irq, void *devid) +{ + struct adv7180_state *state = devid; + + schedule_work(&state->work); + + disable_irq_nosync(state->irq); + + return IRQ_HANDLED; +} + +static int init_device(struct i2c_client *client, struct adv7180_state *state) +{ + int ret; + + /* Initialize adv7180 */ + /* Enable autodetection */ + if (state->autodetect) { + ret = + i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, + ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM + | state->input); + if (ret < 0) + return ret; + + ret = + i2c_smbus_write_byte_data(client, + ADV7180_AUTODETECT_ENABLE_REG, + ADV7180_AUTODETECT_DEFAULT); + if (ret < 0) + return ret; + } else { + ret = v4l2_std_to_adv7180(state->curr_norm); + if (ret < 0) + return ret; + + ret = + i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, + ret | state->input); + if (ret < 0) + return ret; + + } + /* ITU-R BT.656-4 compatible */ + ret = i2c_smbus_write_byte_data(client, + ADV7180_EXTENDED_OUTPUT_CONTROL_REG, + ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS); + if (ret < 0) + return ret; + + /* Manually set V bit end position in NTSC mode */ + ret = i2c_smbus_write_byte_data(client, + ADV7180_NTSC_V_BIT_END_REG, + ADV7180_NTSC_V_BIT_END_MANUAL_NVEND); + if (ret < 0) + return ret; + + /* read current norm */ + __adv7180_status(client, NULL, &state->curr_norm); + + /* register for interrupts */ + if (state->irq > 0) { + ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME, + state); + if (ret) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, + ADV7180_ADI_CTRL_IRQ_SPACE); + if (ret < 0) + return ret; + + /* config the Interrupt pin to be active low */ + ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI, + ADV7180_ICONF1_ACTIVE_LOW | + ADV7180_ICONF1_PSYNC_ONLY); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0); + if (ret < 0) + return ret; + + /* enable AD change interrupts interrupts */ + ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI, + ADV7180_IRQ3_AD_CHANGE); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, + 0); + if (ret < 0) + return ret; + } + + return 0; +} + +static int adv7180_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7180_state *state; + struct v4l2_subdev *sd; + int ret; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr, client->adapter->name); + + state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL); + if (state == NULL) { + ret = -ENOMEM; + goto err; + } + + state->irq = client->irq; + INIT_WORK(&state->work, adv7180_work); + mutex_init(&state->mutex); + state->autodetect = true; + state->input = 0; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &adv7180_ops); + + ret = adv7180_init_controls(state); + if (ret) + goto err_unreg_subdev; + ret = init_device(client, state); + if (ret) + goto err_free_ctrl; + return 0; + +err_free_ctrl: + adv7180_exit_controls(state); +err_unreg_subdev: + mutex_destroy(&state->mutex); + v4l2_device_unregister_subdev(sd); + kfree(state); +err: + printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret); + return ret; +} + +static int adv7180_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7180_state *state = to_state(sd); + + if (state->irq > 0) { + free_irq(client->irq, state); + if (cancel_work_sync(&state->work)) { + /* + * Work was pending, therefore we need to enable + * IRQ here to balance the disable_irq() done in the + * interrupt handler. + */ + enable_irq(state->irq); + } + } + + mutex_destroy(&state->mutex); + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id adv7180_id[] = { + {KBUILD_MODNAME, 0}, + {}, +}; + +#ifdef CONFIG_PM +static int adv7180_suspend(struct i2c_client *client, pm_message_t state) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG, + ADV7180_PWR_MAN_OFF); + if (ret < 0) + return ret; + return 0; +} + +static int adv7180_resume(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7180_state *state = to_state(sd); + int ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG, + ADV7180_PWR_MAN_ON); + if (ret < 0) + return ret; + ret = init_device(client, state); + if (ret < 0) + return ret; + return 0; +} +#endif + +MODULE_DEVICE_TABLE(i2c, adv7180_id); + +static struct i2c_driver adv7180_driver = { + .driver = { + .owner = THIS_MODULE, + .name = KBUILD_MODNAME, + }, + .probe = adv7180_probe, + .remove = adv7180_remove, +#ifdef CONFIG_PM + .suspend = adv7180_suspend, + .resume = adv7180_resume, +#endif + .id_table = adv7180_id, +}; + +module_i2c_driver(adv7180_driver); + +MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver"); +MODULE_AUTHOR("Mocean Laboratories"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/adv7183.c b/drivers/media/i2c/adv7183.c new file mode 100644 index 00000000..56a1fa4a --- /dev/null +++ b/drivers/media/i2c/adv7183.c @@ -0,0 +1,688 @@ +/* + * adv7183.c Analog Devices ADV7183 video decoder driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "adv7183_regs.h" + +struct adv7183 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + + v4l2_std_id std; /* Current set standard */ + u32 input; + u32 output; + unsigned reset_pin; + unsigned oe_pin; + struct v4l2_mbus_framefmt fmt; +}; + +/* EXAMPLES USING 27 MHz CLOCK + * Mode 1 CVBS Input (Composite Video on AIN5) + * All standards are supported through autodetect, 8-bit, 4:2:2, ITU-R BT.656 output on P15 to P8. + */ +static const unsigned char adv7183_init_regs[] = { + ADV7183_IN_CTRL, 0x04, /* CVBS input on AIN5 */ + ADV7183_DIGI_CLAMP_CTRL_1, 0x00, /* Slow down digital clamps */ + ADV7183_SHAP_FILT_CTRL, 0x41, /* Set CSFM to SH1 */ + ADV7183_ADC_CTRL, 0x16, /* Power down ADC 1 and ADC 2 */ + ADV7183_CTI_DNR_CTRL_4, 0x04, /* Set DNR threshold to 4 for flat response */ + /* ADI recommended programming sequence */ + ADV7183_ADI_CTRL, 0x80, + ADV7183_CTI_DNR_CTRL_4, 0x20, + 0x52, 0x18, + 0x58, 0xED, + 0x77, 0xC5, + 0x7C, 0x93, + 0x7D, 0x00, + 0xD0, 0x48, + 0xD5, 0xA0, + 0xD7, 0xEA, + ADV7183_SD_SATURATION_CR, 0x3E, + ADV7183_PAL_V_END, 0x3E, + ADV7183_PAL_F_TOGGLE, 0x0F, + ADV7183_ADI_CTRL, 0x00, +}; + +static inline struct adv7183 *to_adv7183(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7183, sd); +} +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7183, hdl)->sd; +} + +static inline int adv7183_read(struct v4l2_subdev *sd, unsigned char reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int adv7183_write(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int adv7183_writeregs(struct v4l2_subdev *sd, + const unsigned char *regs, unsigned int num) +{ + unsigned char reg, data; + unsigned int cnt = 0; + + if (num & 0x1) { + v4l2_err(sd, "invalid regs array\n"); + return -1; + } + + while (cnt < num) { + reg = *regs++; + data = *regs++; + cnt += 2; + + adv7183_write(sd, reg, data); + } + return 0; +} + +static int adv7183_log_status(struct v4l2_subdev *sd) +{ + struct adv7183 *decoder = to_adv7183(sd); + + v4l2_info(sd, "adv7183: Input control = 0x%02x\n", + adv7183_read(sd, ADV7183_IN_CTRL)); + v4l2_info(sd, "adv7183: Video selection = 0x%02x\n", + adv7183_read(sd, ADV7183_VD_SEL)); + v4l2_info(sd, "adv7183: Output control = 0x%02x\n", + adv7183_read(sd, ADV7183_OUT_CTRL)); + v4l2_info(sd, "adv7183: Extended output control = 0x%02x\n", + adv7183_read(sd, ADV7183_EXT_OUT_CTRL)); + v4l2_info(sd, "adv7183: Autodetect enable = 0x%02x\n", + adv7183_read(sd, ADV7183_AUTO_DET_EN)); + v4l2_info(sd, "adv7183: Contrast = 0x%02x\n", + adv7183_read(sd, ADV7183_CONTRAST)); + v4l2_info(sd, "adv7183: Brightness = 0x%02x\n", + adv7183_read(sd, ADV7183_BRIGHTNESS)); + v4l2_info(sd, "adv7183: Hue = 0x%02x\n", + adv7183_read(sd, ADV7183_HUE)); + v4l2_info(sd, "adv7183: Default value Y = 0x%02x\n", + adv7183_read(sd, ADV7183_DEF_Y)); + v4l2_info(sd, "adv7183: Default value C = 0x%02x\n", + adv7183_read(sd, ADV7183_DEF_C)); + v4l2_info(sd, "adv7183: ADI control = 0x%02x\n", + adv7183_read(sd, ADV7183_ADI_CTRL)); + v4l2_info(sd, "adv7183: Power Management = 0x%02x\n", + adv7183_read(sd, ADV7183_POW_MANAGE)); + v4l2_info(sd, "adv7183: Status 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_STATUS_1), + adv7183_read(sd, ADV7183_STATUS_2), + adv7183_read(sd, ADV7183_STATUS_3)); + v4l2_info(sd, "adv7183: Ident = 0x%02x\n", + adv7183_read(sd, ADV7183_IDENT)); + v4l2_info(sd, "adv7183: Analog clamp control = 0x%02x\n", + adv7183_read(sd, ADV7183_ANAL_CLAMP_CTRL)); + v4l2_info(sd, "adv7183: Digital clamp control 1 = 0x%02x\n", + adv7183_read(sd, ADV7183_DIGI_CLAMP_CTRL_1)); + v4l2_info(sd, "adv7183: Shaping filter control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SHAP_FILT_CTRL), + adv7183_read(sd, ADV7183_SHAP_FILT_CTRL_2)); + v4l2_info(sd, "adv7183: Comb filter control = 0x%02x\n", + adv7183_read(sd, ADV7183_COMB_FILT_CTRL)); + v4l2_info(sd, "adv7183: ADI control 2 = 0x%02x\n", + adv7183_read(sd, ADV7183_ADI_CTRL_2)); + v4l2_info(sd, "adv7183: Pixel delay control = 0x%02x\n", + adv7183_read(sd, ADV7183_PIX_DELAY_CTRL)); + v4l2_info(sd, "adv7183: Misc gain control = 0x%02x\n", + adv7183_read(sd, ADV7183_MISC_GAIN_CTRL)); + v4l2_info(sd, "adv7183: AGC mode control = 0x%02x\n", + adv7183_read(sd, ADV7183_AGC_MODE_CTRL)); + v4l2_info(sd, "adv7183: Chroma gain control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_1), + adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_2)); + v4l2_info(sd, "adv7183: Luma gain control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_1), + adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_2)); + v4l2_info(sd, "adv7183: Vsync field control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_1), + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_2), + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_3)); + v4l2_info(sd, "adv7183: Hsync positon control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_HS_POS_CTRL_1), + adv7183_read(sd, ADV7183_HS_POS_CTRL_2), + adv7183_read(sd, ADV7183_HS_POS_CTRL_3)); + v4l2_info(sd, "adv7183: Polarity = 0x%02x\n", + adv7183_read(sd, ADV7183_POLARITY)); + v4l2_info(sd, "adv7183: ADC control = 0x%02x\n", + adv7183_read(sd, ADV7183_ADC_CTRL)); + v4l2_info(sd, "adv7183: SD offset Cb and Cr = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SD_OFFSET_CB), + adv7183_read(sd, ADV7183_SD_OFFSET_CR)); + v4l2_info(sd, "adv7183: SD saturation Cb and Cr = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SD_SATURATION_CB), + adv7183_read(sd, ADV7183_SD_SATURATION_CR)); + v4l2_info(sd, "adv7183: Drive strength = 0x%02x\n", + adv7183_read(sd, ADV7183_DRIVE_STR)); + v4l2_ctrl_handler_log_status(&decoder->hdl, sd->name); + return 0; +} + +static int adv7183_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7183 *decoder = to_adv7183(sd); + + *std = decoder->std; + return 0; +} + +static int adv7183_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF; + if (std == V4L2_STD_PAL_60) + reg |= 0x60; + else if (std == V4L2_STD_NTSC_443) + reg |= 0x70; + else if (std == V4L2_STD_PAL_N) + reg |= 0x90; + else if (std == V4L2_STD_PAL_M) + reg |= 0xA0; + else if (std == V4L2_STD_PAL_Nc) + reg |= 0xC0; + else if (std & V4L2_STD_PAL) + reg |= 0x80; + else if (std & V4L2_STD_NTSC) + reg |= 0x50; + else if (std & V4L2_STD_SECAM) + reg |= 0xE0; + else + return -EINVAL; + adv7183_write(sd, ADV7183_IN_CTRL, reg); + + decoder->std = std; + + return 0; +} + +static int adv7183_reset(struct v4l2_subdev *sd, u32 val) +{ + int reg; + + reg = adv7183_read(sd, ADV7183_POW_MANAGE) | 0x80; + adv7183_write(sd, ADV7183_POW_MANAGE, reg); + /* wait 5ms before any further i2c writes are performed */ + usleep_range(5000, 10000); + return 0; +} + +static int adv7183_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + if ((input > ADV7183_COMPONENT1) || (output > ADV7183_16BIT_OUT)) + return -EINVAL; + + if (input != decoder->input) { + decoder->input = input; + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF0; + switch (input) { + case ADV7183_COMPOSITE1: + reg |= 0x1; + break; + case ADV7183_COMPOSITE2: + reg |= 0x2; + break; + case ADV7183_COMPOSITE3: + reg |= 0x3; + break; + case ADV7183_COMPOSITE4: + reg |= 0x4; + break; + case ADV7183_COMPOSITE5: + reg |= 0x5; + break; + case ADV7183_COMPOSITE6: + reg |= 0xB; + break; + case ADV7183_COMPOSITE7: + reg |= 0xC; + break; + case ADV7183_COMPOSITE8: + reg |= 0xD; + break; + case ADV7183_COMPOSITE9: + reg |= 0xE; + break; + case ADV7183_COMPOSITE10: + reg |= 0xF; + break; + case ADV7183_SVIDEO0: + reg |= 0x6; + break; + case ADV7183_SVIDEO1: + reg |= 0x7; + break; + case ADV7183_SVIDEO2: + reg |= 0x8; + break; + case ADV7183_COMPONENT0: + reg |= 0x9; + break; + case ADV7183_COMPONENT1: + reg |= 0xA; + break; + default: + break; + } + adv7183_write(sd, ADV7183_IN_CTRL, reg); + } + + if (output != decoder->output) { + decoder->output = output; + reg = adv7183_read(sd, ADV7183_OUT_CTRL) & 0xC0; + switch (output) { + case ADV7183_16BIT_OUT: + reg |= 0x9; + break; + default: + reg |= 0xC; + break; + } + adv7183_write(sd, ADV7183_OUT_CTRL, reg); + } + + return 0; +} + +static int adv7183_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + int val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (val < 0) + val = 127 - val; + adv7183_write(sd, ADV7183_BRIGHTNESS, val); + break; + case V4L2_CID_CONTRAST: + adv7183_write(sd, ADV7183_CONTRAST, val); + break; + case V4L2_CID_SATURATION: + adv7183_write(sd, ADV7183_SD_SATURATION_CB, val >> 8); + adv7183_write(sd, ADV7183_SD_SATURATION_CR, (val & 0xFF)); + break; + case V4L2_CID_HUE: + adv7183_write(sd, ADV7183_SD_OFFSET_CB, val >> 8); + adv7183_write(sd, ADV7183_SD_OFFSET_CR, (val & 0xFF)); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int adv7183_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + /* enable autodetection block */ + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF; + adv7183_write(sd, ADV7183_IN_CTRL, reg); + + /* wait autodetection switch */ + mdelay(10); + + /* get autodetection result */ + reg = adv7183_read(sd, ADV7183_STATUS_1); + switch ((reg >> 0x4) & 0x7) { + case 0: + *std = V4L2_STD_NTSC; + break; + case 1: + *std = V4L2_STD_NTSC_443; + break; + case 2: + *std = V4L2_STD_PAL_M; + break; + case 3: + *std = V4L2_STD_PAL_60; + break; + case 4: + *std = V4L2_STD_PAL; + break; + case 5: + *std = V4L2_STD_SECAM; + break; + case 6: + *std = V4L2_STD_PAL_Nc; + break; + case 7: + *std = V4L2_STD_SECAM; + break; + default: + *std = V4L2_STD_UNKNOWN; + break; + } + + /* after std detection, write back user set std */ + adv7183_s_std(sd, decoder->std); + return 0; +} + +static int adv7183_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + int reg; + + *status = V4L2_IN_ST_NO_SIGNAL; + reg = adv7183_read(sd, ADV7183_STATUS_1); + if (reg < 0) + return reg; + if (reg & 0x1) + *status = 0; + return 0; +} + +static int adv7183_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index > 0) + return -EINVAL; + + *code = V4L2_MBUS_FMT_UYVY8_2X8; + return 0; +} + +static int adv7183_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + fmt->code = V4L2_MBUS_FMT_UYVY8_2X8; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + if (decoder->std & V4L2_STD_525_60) { + fmt->field = V4L2_FIELD_SEQ_TB; + fmt->width = 720; + fmt->height = 480; + } else { + fmt->field = V4L2_FIELD_SEQ_BT; + fmt->width = 720; + fmt->height = 576; + } + return 0; +} + +static int adv7183_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + adv7183_try_mbus_fmt(sd, fmt); + decoder->fmt = *fmt; + return 0; +} + +static int adv7183_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + *fmt = decoder->fmt; + return 0; +} + +static int adv7183_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct adv7183 *decoder = to_adv7183(sd); + + if (enable) + gpio_direction_output(decoder->oe_pin, 0); + else + gpio_direction_output(decoder->oe_pin, 1); + udelay(1); + return 0; +} + +static int adv7183_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* 0x11 for adv7183, 0x13 for adv7183b */ + rev = adv7183_read(sd, ADV7183_IDENT); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7183, rev); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int adv7183_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = adv7183_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int adv7183_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + adv7183_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops adv7183_ctrl_ops = { + .s_ctrl = adv7183_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7183_core_ops = { + .log_status = adv7183_log_status, + .g_std = adv7183_g_std, + .s_std = adv7183_s_std, + .reset = adv7183_reset, + .g_chip_ident = adv7183_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = adv7183_g_register, + .s_register = adv7183_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops adv7183_video_ops = { + .s_routing = adv7183_s_routing, + .querystd = adv7183_querystd, + .g_input_status = adv7183_g_input_status, + .enum_mbus_fmt = adv7183_enum_mbus_fmt, + .try_mbus_fmt = adv7183_try_mbus_fmt, + .s_mbus_fmt = adv7183_s_mbus_fmt, + .g_mbus_fmt = adv7183_g_mbus_fmt, + .s_stream = adv7183_s_stream, +}; + +static const struct v4l2_subdev_ops adv7183_ops = { + .core = &adv7183_core_ops, + .video = &adv7183_video_ops, +}; + +static int adv7183_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7183 *decoder; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + int ret; + struct v4l2_mbus_framefmt fmt; + const unsigned *pin_array; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + pin_array = client->dev.platform_data; + if (pin_array == NULL) + return -EINVAL; + + decoder = kzalloc(sizeof(struct adv7183), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + + decoder->reset_pin = pin_array[0]; + decoder->oe_pin = pin_array[1]; + + if (gpio_request(decoder->reset_pin, "ADV7183 Reset")) { + v4l_err(client, "failed to request GPIO %d\n", decoder->reset_pin); + ret = -EBUSY; + goto err_free_decoder; + } + + if (gpio_request(decoder->oe_pin, "ADV7183 Output Enable")) { + v4l_err(client, "failed to request GPIO %d\n", decoder->oe_pin); + ret = -EBUSY; + goto err_free_reset; + } + + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &adv7183_ops); + + hdl = &decoder->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x80); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xFFFF, 1, 0x8080); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_HUE, 0, 0xFFFF, 1, 0x8080); + /* hook the control handler into the driver */ + sd->ctrl_handler = hdl; + if (hdl->error) { + ret = hdl->error; + + v4l2_ctrl_handler_free(hdl); + goto err_free_oe; + } + + /* v4l2 doesn't support an autodetect standard, pick PAL as default */ + decoder->std = V4L2_STD_PAL; + decoder->input = ADV7183_COMPOSITE4; + decoder->output = ADV7183_8BIT_OUT; + + gpio_direction_output(decoder->oe_pin, 1); + /* reset chip */ + gpio_direction_output(decoder->reset_pin, 0); + /* reset pulse width at least 5ms */ + mdelay(10); + gpio_direction_output(decoder->reset_pin, 1); + /* wait 5ms before any further i2c writes are performed */ + mdelay(5); + + adv7183_writeregs(sd, adv7183_init_regs, ARRAY_SIZE(adv7183_init_regs)); + adv7183_s_std(sd, decoder->std); + fmt.width = 720; + fmt.height = 576; + adv7183_s_mbus_fmt(sd, &fmt); + + /* initialize the hardware to the default control values */ + ret = v4l2_ctrl_handler_setup(hdl); + if (ret) { + v4l2_ctrl_handler_free(hdl); + goto err_free_oe; + } + + return 0; +err_free_oe: + gpio_free(decoder->oe_pin); +err_free_reset: + gpio_free(decoder->reset_pin); +err_free_decoder: + kfree(decoder); + return ret; +} + +static int adv7183_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7183 *decoder = to_adv7183(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + gpio_free(decoder->oe_pin); + gpio_free(decoder->reset_pin); + kfree(decoder); + return 0; +} + +static const struct i2c_device_id adv7183_id[] = { + {"adv7183", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, adv7183_id); + +static struct i2c_driver adv7183_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7183", + }, + .probe = adv7183_probe, + .remove = adv7183_remove, + .id_table = adv7183_id, +}; + +module_i2c_driver(adv7183_driver); + +MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver"); +MODULE_AUTHOR("Scott Jiang "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/adv7183_regs.h b/drivers/media/i2c/adv7183_regs.h new file mode 100644 index 00000000..4a5b7d21 --- /dev/null +++ b/drivers/media/i2c/adv7183_regs.h @@ -0,0 +1,107 @@ +/* + * adv7183 - Analog Devices ADV7183 video decoder registers + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ADV7183_REGS_H_ +#define _ADV7183_REGS_H_ + +#define ADV7183_IN_CTRL 0x00 /* Input control */ +#define ADV7183_VD_SEL 0x01 /* Video selection */ +#define ADV7183_OUT_CTRL 0x03 /* Output control */ +#define ADV7183_EXT_OUT_CTRL 0x04 /* Extended output control */ +#define ADV7183_AUTO_DET_EN 0x07 /* Autodetect enable */ +#define ADV7183_CONTRAST 0x08 /* Contrast */ +#define ADV7183_BRIGHTNESS 0x0A /* Brightness */ +#define ADV7183_HUE 0x0B /* Hue */ +#define ADV7183_DEF_Y 0x0C /* Default value Y */ +#define ADV7183_DEF_C 0x0D /* Default value C */ +#define ADV7183_ADI_CTRL 0x0E /* ADI control */ +#define ADV7183_POW_MANAGE 0x0F /* Power Management */ +#define ADV7183_STATUS_1 0x10 /* Status 1 */ +#define ADV7183_IDENT 0x11 /* Ident */ +#define ADV7183_STATUS_2 0x12 /* Status 2 */ +#define ADV7183_STATUS_3 0x13 /* Status 3 */ +#define ADV7183_ANAL_CLAMP_CTRL 0x14 /* Analog clamp control */ +#define ADV7183_DIGI_CLAMP_CTRL_1 0x15 /* Digital clamp control 1 */ +#define ADV7183_SHAP_FILT_CTRL 0x17 /* Shaping filter control */ +#define ADV7183_SHAP_FILT_CTRL_2 0x18 /* Shaping filter control 2 */ +#define ADV7183_COMB_FILT_CTRL 0x19 /* Comb filter control */ +#define ADV7183_ADI_CTRL_2 0x1D /* ADI control 2 */ +#define ADV7183_PIX_DELAY_CTRL 0x27 /* Pixel delay control */ +#define ADV7183_MISC_GAIN_CTRL 0x2B /* Misc gain control */ +#define ADV7183_AGC_MODE_CTRL 0x2C /* AGC mode control */ +#define ADV7183_CHRO_GAIN_CTRL_1 0x2D /* Chroma gain control 1 */ +#define ADV7183_CHRO_GAIN_CTRL_2 0x2E /* Chroma gain control 2 */ +#define ADV7183_LUMA_GAIN_CTRL_1 0x2F /* Luma gain control 1 */ +#define ADV7183_LUMA_GAIN_CTRL_2 0x30 /* Luma gain control 2 */ +#define ADV7183_VS_FIELD_CTRL_1 0x31 /* Vsync field control 1 */ +#define ADV7183_VS_FIELD_CTRL_2 0x32 /* Vsync field control 2 */ +#define ADV7183_VS_FIELD_CTRL_3 0x33 /* Vsync field control 3 */ +#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync positon control 1 */ +#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync positon control 2 */ +#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync positon control 3 */ +#define ADV7183_POLARITY 0x37 /* Polarity */ +#define ADV7183_NTSC_COMB_CTRL 0x38 /* NTSC comb control */ +#define ADV7183_PAL_COMB_CTRL 0x39 /* PAL comb control */ +#define ADV7183_ADC_CTRL 0x3A /* ADC control */ +#define ADV7183_MAN_WIN_CTRL 0x3D /* Manual window control */ +#define ADV7183_RESAMPLE_CTRL 0x41 /* Resample control */ +#define ADV7183_GEMSTAR_CTRL_1 0x48 /* Gemstar ctrl 1 */ +#define ADV7183_GEMSTAR_CTRL_2 0x49 /* Gemstar ctrl 2 */ +#define ADV7183_GEMSTAR_CTRL_3 0x4A /* Gemstar ctrl 3 */ +#define ADV7183_GEMSTAR_CTRL_4 0x4B /* Gemstar ctrl 4 */ +#define ADV7183_GEMSTAR_CTRL_5 0x4C /* Gemstar ctrl 5 */ +#define ADV7183_CTI_DNR_CTRL_1 0x4D /* CTI DNR ctrl 1 */ +#define ADV7183_CTI_DNR_CTRL_2 0x4E /* CTI DNR ctrl 2 */ +#define ADV7183_CTI_DNR_CTRL_4 0x50 /* CTI DNR ctrl 4 */ +#define ADV7183_LOCK_CNT 0x51 /* Lock count */ +#define ADV7183_FREE_LINE_LEN 0x8F /* Free-Run line length 1 */ +#define ADV7183_VBI_INFO 0x90 /* VBI info */ +#define ADV7183_WSS_1 0x91 /* WSS 1 */ +#define ADV7183_WSS_2 0x92 /* WSS 2 */ +#define ADV7183_EDTV_1 0x93 /* EDTV 1 */ +#define ADV7183_EDTV_2 0x94 /* EDTV 2 */ +#define ADV7183_EDTV_3 0x95 /* EDTV 3 */ +#define ADV7183_CGMS_1 0x96 /* CGMS 1 */ +#define ADV7183_CGMS_2 0x97 /* CGMS 2 */ +#define ADV7183_CGMS_3 0x98 /* CGMS 3 */ +#define ADV7183_CCAP_1 0x99 /* CCAP 1 */ +#define ADV7183_CCAP_2 0x9A /* CCAP 2 */ +#define ADV7183_LETTERBOX_1 0x9B /* Letterbox 1 */ +#define ADV7183_LETTERBOX_2 0x9C /* Letterbox 2 */ +#define ADV7183_LETTERBOX_3 0x9D /* Letterbox 3 */ +#define ADV7183_CRC_EN 0xB2 /* CRC enable */ +#define ADV7183_ADC_SWITCH_1 0xC3 /* ADC switch 1 */ +#define ADV7183_ADC_SWITCH_2 0xC4 /* ADC swithc 2 */ +#define ADV7183_LETTERBOX_CTRL_1 0xDC /* Letterbox control 1 */ +#define ADV7183_LETTERBOX_CTRL_2 0xDD /* Letterbox control 2 */ +#define ADV7183_SD_OFFSET_CB 0xE1 /* SD offset Cb */ +#define ADV7183_SD_OFFSET_CR 0xE2 /* SD offset Cr */ +#define ADV7183_SD_SATURATION_CB 0xE3 /* SD saturation Cb */ +#define ADV7183_SD_SATURATION_CR 0xE4 /* SD saturation Cr */ +#define ADV7183_NTSC_V_BEGIN 0xE5 /* NTSC V bit begin */ +#define ADV7183_NTSC_V_END 0xE6 /* NTSC V bit end */ +#define ADV7183_NTSC_F_TOGGLE 0xE7 /* NTSC F bit toggle */ +#define ADV7183_PAL_V_BEGIN 0xE8 /* PAL V bit begin */ +#define ADV7183_PAL_V_END 0xE9 /* PAL V bit end */ +#define ADV7183_PAL_F_TOGGLE 0xEA /* PAL F bit toggle */ +#define ADV7183_DRIVE_STR 0xF4 /* Drive strength */ +#define ADV7183_IF_COMP_CTRL 0xF8 /* IF comp control */ +#define ADV7183_VS_MODE_CTRL 0xF9 /* VS mode control */ + +#endif diff --git a/drivers/media/i2c/adv7343.c b/drivers/media/i2c/adv7343.c new file mode 100644 index 00000000..9fc2b985 --- /dev/null +++ b/drivers/media/i2c/adv7343.c @@ -0,0 +1,499 @@ +/* + * adv7343 - ADV7343 Video Encoder Driver + * + * The encoder hardware does not support SECAM. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "adv7343_regs.h" + +MODULE_DESCRIPTION("ADV7343 video encoder driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +struct adv7343_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + const struct adv7343_platform_data *pdata; + u8 reg00; + u8 reg01; + u8 reg02; + u8 reg35; + u8 reg80; + u8 reg82; + u32 output; + v4l2_std_id std; +}; + +static inline struct adv7343_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7343_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7343_state, hdl)->sd; +} + +static inline int adv7343_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static const u8 adv7343_init_reg_val[] = { + ADV7343_SOFT_RESET, ADV7343_SOFT_RESET_DEFAULT, + ADV7343_POWER_MODE_REG, ADV7343_POWER_MODE_REG_DEFAULT, + + ADV7343_HD_MODE_REG1, ADV7343_HD_MODE_REG1_DEFAULT, + ADV7343_HD_MODE_REG2, ADV7343_HD_MODE_REG2_DEFAULT, + ADV7343_HD_MODE_REG3, ADV7343_HD_MODE_REG3_DEFAULT, + ADV7343_HD_MODE_REG4, ADV7343_HD_MODE_REG4_DEFAULT, + ADV7343_HD_MODE_REG5, ADV7343_HD_MODE_REG5_DEFAULT, + ADV7343_HD_MODE_REG6, ADV7343_HD_MODE_REG6_DEFAULT, + ADV7343_HD_MODE_REG7, ADV7343_HD_MODE_REG7_DEFAULT, + + ADV7343_SD_MODE_REG1, ADV7343_SD_MODE_REG1_DEFAULT, + ADV7343_SD_MODE_REG2, ADV7343_SD_MODE_REG2_DEFAULT, + ADV7343_SD_MODE_REG3, ADV7343_SD_MODE_REG3_DEFAULT, + ADV7343_SD_MODE_REG4, ADV7343_SD_MODE_REG4_DEFAULT, + ADV7343_SD_MODE_REG5, ADV7343_SD_MODE_REG5_DEFAULT, + ADV7343_SD_MODE_REG6, ADV7343_SD_MODE_REG6_DEFAULT, + ADV7343_SD_MODE_REG7, ADV7343_SD_MODE_REG7_DEFAULT, + ADV7343_SD_MODE_REG8, ADV7343_SD_MODE_REG8_DEFAULT, + + ADV7343_SD_HUE_REG, ADV7343_SD_HUE_REG_DEFAULT, + ADV7343_SD_CGMS_WSS0, ADV7343_SD_CGMS_WSS0_DEFAULT, + ADV7343_SD_BRIGHTNESS_WSS, ADV7343_SD_BRIGHTNESS_WSS_DEFAULT, +}; + +/* + * 2^32 + * FSC(reg) = FSC (HZ) * -------- + * 27000000 + */ +static const struct adv7343_std_info stdinfo[] = { + { + /* FSC(Hz) = 3,579,545.45 Hz */ + SD_STD_NTSC, 569408542, V4L2_STD_NTSC, + }, { + /* FSC(Hz) = 3,575,611.00 Hz */ + SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M, + }, { + /* FSC(Hz) = 3,582,056.00 */ + SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60, + }, +}; + +static int adv7343_setstd(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7343_state *state = to_state(sd); + struct adv7343_std_info *std_info; + int num_std; + char *fsc_ptr; + u8 reg, val; + int err = 0; + int i = 0; + + std_info = (struct adv7343_std_info *)stdinfo; + num_std = ARRAY_SIZE(stdinfo); + + for (i = 0; i < num_std; i++) { + if (std_info[i].stdid & std) + break; + } + + if (i == num_std) { + v4l2_dbg(1, debug, sd, + "Invalid std or std is not supported: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + + /* Set the standard */ + val = state->reg80 & (~(SD_STD_MASK)); + val |= std_info[i].standard_val3; + err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val); + if (err < 0) + goto setstd_exit; + + state->reg80 = val; + + /* Configure the input mode register */ + val = state->reg01 & (~((u8) INPUT_MODE_MASK)); + val |= SD_INPUT_MODE; + err = adv7343_write(sd, ADV7343_MODE_SELECT_REG, val); + if (err < 0) + goto setstd_exit; + + state->reg01 = val; + + /* Program the sub carrier frequency registers */ + fsc_ptr = (unsigned char *)&std_info[i].fsc_val; + reg = ADV7343_FSC_REG0; + for (i = 0; i < 4; i++, reg++, fsc_ptr++) { + err = adv7343_write(sd, reg, *fsc_ptr); + if (err < 0) + goto setstd_exit; + } + + val = state->reg80; + + /* Filter settings */ + if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443)) + val &= 0x03; + else if (std & ~V4L2_STD_SECAM) + val |= 0x04; + + err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val); + if (err < 0) + goto setstd_exit; + + state->reg80 = val; + +setstd_exit: + if (err != 0) + v4l2_err(sd, "Error setting std, write failed\n"); + + return err; +} + +static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type) +{ + struct adv7343_state *state = to_state(sd); + unsigned char val; + int err = 0; + + if (output_type > ADV7343_SVIDEO_ID) { + v4l2_dbg(1, debug, sd, + "Invalid output type or output type not supported:%d\n", + output_type); + return -EINVAL; + } + + /* Enable Appropriate DAC */ + val = state->reg00 & 0x03; + + /* configure default configuration */ + if (!state->pdata) + if (output_type == ADV7343_COMPOSITE_ID) + val |= ADV7343_COMPOSITE_POWER_VALUE; + else if (output_type == ADV7343_COMPONENT_ID) + val |= ADV7343_COMPONENT_POWER_VALUE; + else + val |= ADV7343_SVIDEO_POWER_VALUE; + else + val = state->pdata->mode_config.sleep_mode << 0 | + state->pdata->mode_config.pll_control << 1 | + state->pdata->mode_config.dac_3 << 2 | + state->pdata->mode_config.dac_2 << 3 | + state->pdata->mode_config.dac_1 << 4 | + state->pdata->mode_config.dac_6 << 5 | + state->pdata->mode_config.dac_5 << 6 | + state->pdata->mode_config.dac_4 << 7; + + err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val); + if (err < 0) + goto setoutput_exit; + + state->reg00 = val; + + /* Enable YUV output */ + val = state->reg02 | YUV_OUTPUT_SELECT; + err = adv7343_write(sd, ADV7343_MODE_REG0, val); + if (err < 0) + goto setoutput_exit; + + state->reg02 = val; + + /* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */ + val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI); + + if (state->pdata && state->pdata->sd_config.sd_dac_out1) + val = val | (state->pdata->sd_config.sd_dac_out1 << 1); + else if (state->pdata && !state->pdata->sd_config.sd_dac_out1) + val = val & ~(state->pdata->sd_config.sd_dac_out1 << 1); + + if (state->pdata && state->pdata->sd_config.sd_dac_out2) + val = val | (state->pdata->sd_config.sd_dac_out2 << 2); + else if (state->pdata && !state->pdata->sd_config.sd_dac_out2) + val = val & ~(state->pdata->sd_config.sd_dac_out2 << 2); + + err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val); + if (err < 0) + goto setoutput_exit; + + state->reg82 = val; + + /* configure ED/HD Color DAC Swap and ED/HD RGB Input Enable bit to + * zero */ + val = state->reg35 & (HD_RGB_INPUT_DI & HD_DAC_SWAP_DI); + err = adv7343_write(sd, ADV7343_HD_MODE_REG6, val); + if (err < 0) + goto setoutput_exit; + + state->reg35 = val; + +setoutput_exit: + if (err != 0) + v4l2_err(sd, "Error setting output, write failed\n"); + + return err; +} + +static int adv7343_log_status(struct v4l2_subdev *sd) +{ + struct adv7343_state *state = to_state(sd); + + v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std); + v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" : + ((state->output == 1) ? "Component" : "S-Video")); + return 0; +} + +static int adv7343_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + return adv7343_write(sd, ADV7343_SD_BRIGHTNESS_WSS, + ctrl->val); + + case V4L2_CID_HUE: + return adv7343_write(sd, ADV7343_SD_HUE_REG, ctrl->val); + + case V4L2_CID_GAIN: + return adv7343_write(sd, ADV7343_DAC2_OUTPUT_LEVEL, ctrl->val); + } + return -EINVAL; +} + +static int adv7343_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7343, 0); +} + +static const struct v4l2_ctrl_ops adv7343_ctrl_ops = { + .s_ctrl = adv7343_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7343_core_ops = { + .log_status = adv7343_log_status, + .g_chip_ident = adv7343_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static int adv7343_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + + if (state->std == std) + return 0; + + err = adv7343_setstd(sd, std); + if (!err) + state->std = std; + + return err; +} + +static int adv7343_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + + if (state->output == output) + return 0; + + err = adv7343_setoutput(sd, output); + if (!err) + state->output = output; + + return err; +} + +static const struct v4l2_subdev_video_ops adv7343_video_ops = { + .s_std_output = adv7343_s_std_output, + .s_routing = adv7343_s_routing, +}; + +static const struct v4l2_subdev_ops adv7343_ops = { + .core = &adv7343_core_ops, + .video = &adv7343_video_ops, +}; + +static int adv7343_initialize(struct v4l2_subdev *sd) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(adv7343_init_reg_val); i += 2) { + + err = adv7343_write(sd, adv7343_init_reg_val[i], + adv7343_init_reg_val[i+1]); + if (err) { + v4l2_err(sd, "Error initializing\n"); + return err; + } + } + + /* Configure for default video standard */ + err = adv7343_setoutput(sd, state->output); + if (err < 0) { + v4l2_err(sd, "Error setting output during init\n"); + return -EINVAL; + } + + err = adv7343_setstd(sd, state->std); + if (err < 0) { + v4l2_err(sd, "Error setting std during init\n"); + return -EINVAL; + } + + return err; +} + +static int adv7343_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7343_state *state; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = devm_kzalloc(&client->dev, sizeof(struct adv7343_state), + GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + /* Copy board specific information here */ + state->pdata = client->dev.platform_data; + + state->reg00 = 0x80; + state->reg01 = 0x00; + state->reg02 = 0x20; + state->reg35 = 0x00; + state->reg80 = ADV7343_SD_MODE_REG1_DEFAULT; + state->reg82 = ADV7343_SD_MODE_REG2_DEFAULT; + + state->output = ADV7343_COMPOSITE_ID; + state->std = V4L2_STD_NTSC; + + v4l2_i2c_subdev_init(&state->sd, client, &adv7343_ops); + + v4l2_ctrl_handler_init(&state->hdl, 2); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_BRIGHTNESS, ADV7343_BRIGHTNESS_MIN, + ADV7343_BRIGHTNESS_MAX, 1, + ADV7343_BRIGHTNESS_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_HUE, ADV7343_HUE_MIN, + ADV7343_HUE_MAX, 1, + ADV7343_HUE_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_GAIN, ADV7343_GAIN_MIN, + ADV7343_GAIN_MAX, 1, + ADV7343_GAIN_DEF); + state->sd.ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + return err; + } + v4l2_ctrl_handler_setup(&state->hdl); + + err = adv7343_initialize(&state->sd); + if (err) + v4l2_ctrl_handler_free(&state->hdl); + return err; +} + +static int adv7343_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7343_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + + return 0; +} + +static const struct i2c_device_id adv7343_id[] = { + {"adv7343", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, adv7343_id); + +static struct i2c_driver adv7343_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7343", + }, + .probe = adv7343_probe, + .remove = adv7343_remove, + .id_table = adv7343_id, +}; + +module_i2c_driver(adv7343_driver); diff --git a/drivers/media/i2c/adv7343_regs.h b/drivers/media/i2c/adv7343_regs.h new file mode 100644 index 00000000..44660676 --- /dev/null +++ b/drivers/media/i2c/adv7343_regs.h @@ -0,0 +1,181 @@ +/* + * ADV7343 encoder related structure and register definitions + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ADV7343_REG_H +#define ADV7343_REGS_H + +struct adv7343_std_info { + u32 standard_val3; + u32 fsc_val; + v4l2_std_id stdid; +}; + +/* Register offset macros */ +#define ADV7343_POWER_MODE_REG (0x00) +#define ADV7343_MODE_SELECT_REG (0x01) +#define ADV7343_MODE_REG0 (0x02) + +#define ADV7343_DAC2_OUTPUT_LEVEL (0x0b) + +#define ADV7343_SOFT_RESET (0x17) + +#define ADV7343_HD_MODE_REG1 (0x30) +#define ADV7343_HD_MODE_REG2 (0x31) +#define ADV7343_HD_MODE_REG3 (0x32) +#define ADV7343_HD_MODE_REG4 (0x33) +#define ADV7343_HD_MODE_REG5 (0x34) +#define ADV7343_HD_MODE_REG6 (0x35) + +#define ADV7343_HD_MODE_REG7 (0x39) + +#define ADV7343_SD_MODE_REG1 (0x80) +#define ADV7343_SD_MODE_REG2 (0x82) +#define ADV7343_SD_MODE_REG3 (0x83) +#define ADV7343_SD_MODE_REG4 (0x84) +#define ADV7343_SD_MODE_REG5 (0x86) +#define ADV7343_SD_MODE_REG6 (0x87) +#define ADV7343_SD_MODE_REG7 (0x88) +#define ADV7343_SD_MODE_REG8 (0x89) + +#define ADV7343_FSC_REG0 (0x8C) +#define ADV7343_FSC_REG1 (0x8D) +#define ADV7343_FSC_REG2 (0x8E) +#define ADV7343_FSC_REG3 (0x8F) + +#define ADV7343_SD_CGMS_WSS0 (0x99) + +#define ADV7343_SD_HUE_REG (0xA0) +#define ADV7343_SD_BRIGHTNESS_WSS (0xA1) + +/* Default values for the registers */ +#define ADV7343_POWER_MODE_REG_DEFAULT (0x10) +#define ADV7343_HD_MODE_REG1_DEFAULT (0x3C) /* Changed Default + 720p EAVSAV code*/ +#define ADV7343_HD_MODE_REG2_DEFAULT (0x01) /* Changed Pixel data + valid */ +#define ADV7343_HD_MODE_REG3_DEFAULT (0x00) /* Color delay 0 clks */ +#define ADV7343_HD_MODE_REG4_DEFAULT (0xE8) /* Changed */ +#define ADV7343_HD_MODE_REG5_DEFAULT (0x08) +#define ADV7343_HD_MODE_REG6_DEFAULT (0x00) +#define ADV7343_HD_MODE_REG7_DEFAULT (0x00) +#define ADV7343_SD_MODE_REG8_DEFAULT (0x00) +#define ADV7343_SOFT_RESET_DEFAULT (0x02) +#define ADV7343_COMPOSITE_POWER_VALUE (0x80) +#define ADV7343_COMPONENT_POWER_VALUE (0x1C) +#define ADV7343_SVIDEO_POWER_VALUE (0x60) +#define ADV7343_SD_HUE_REG_DEFAULT (127) +#define ADV7343_SD_BRIGHTNESS_WSS_DEFAULT (0x03) + +#define ADV7343_SD_CGMS_WSS0_DEFAULT (0x10) + +#define ADV7343_SD_MODE_REG1_DEFAULT (0x00) +#define ADV7343_SD_MODE_REG2_DEFAULT (0xC9) +#define ADV7343_SD_MODE_REG3_DEFAULT (0x10) +#define ADV7343_SD_MODE_REG4_DEFAULT (0x01) +#define ADV7343_SD_MODE_REG5_DEFAULT (0x02) +#define ADV7343_SD_MODE_REG6_DEFAULT (0x0C) +#define ADV7343_SD_MODE_REG7_DEFAULT (0x04) +#define ADV7343_SD_MODE_REG8_DEFAULT (0x00) + +/* Bit masks for Mode Select Register */ +#define INPUT_MODE_MASK (0x70) +#define SD_INPUT_MODE (0x00) +#define HD_720P_INPUT_MODE (0x10) +#define HD_1080I_INPUT_MODE (0x10) + +/* Bit masks for Mode Register 0 */ +#define TEST_PATTERN_BLACK_BAR_EN (0x04) +#define YUV_OUTPUT_SELECT (0x20) +#define RGB_OUTPUT_SELECT (0xDF) + +/* Bit masks for DAC output levels */ +#define DAC_OUTPUT_LEVEL_MASK (0xFF) + +/* Bit masks for soft reset register */ +#define SOFT_RESET (0x02) + +/* Bit masks for HD Mode Register 1 */ +#define OUTPUT_STD_MASK (0x03) +#define OUTPUT_STD_SHIFT (0) +#define OUTPUT_STD_EIA0_2 (0x00) +#define OUTPUT_STD_EIA0_1 (0x01) +#define OUTPUT_STD_FULL (0x02) +#define EMBEDDED_SYNC (0x04) +#define EXTERNAL_SYNC (0xFB) +#define STD_MODE_SHIFT (3) +#define STD_MODE_MASK (0x1F) +#define STD_MODE_720P (0x05) +#define STD_MODE_720P_25 (0x08) +#define STD_MODE_720P_30 (0x07) +#define STD_MODE_720P_50 (0x06) +#define STD_MODE_1080I (0x0D) +#define STD_MODE_1080I_25fps (0x0E) +#define STD_MODE_1080P_24 (0x12) +#define STD_MODE_1080P_25 (0x10) +#define STD_MODE_1080P_30 (0x0F) +#define STD_MODE_525P (0x00) +#define STD_MODE_625P (0x03) + +/* Bit masks for SD Mode Register 1 */ +#define SD_STD_MASK (0x03) +#define SD_STD_NTSC (0x00) +#define SD_STD_PAL_BDGHI (0x01) +#define SD_STD_PAL_M (0x02) +#define SD_STD_PAL_N (0x03) +#define SD_LUMA_FLTR_MASK (0x7) +#define SD_LUMA_FLTR_SHIFT (0x2) +#define SD_CHROMA_FLTR_MASK (0x7) +#define SD_CHROMA_FLTR_SHIFT (0x5) + +/* Bit masks for SD Mode Register 2 */ +#define SD_PBPR_SSAF_EN (0x01) +#define SD_PBPR_SSAF_DI (0xFE) +#define SD_DAC_1_DI (0xFD) +#define SD_DAC_2_DI (0xFB) +#define SD_PEDESTAL_EN (0x08) +#define SD_PEDESTAL_DI (0xF7) +#define SD_SQUARE_PIXEL_EN (0x10) +#define SD_SQUARE_PIXEL_DI (0xEF) +#define SD_PIXEL_DATA_VALID (0x40) +#define SD_ACTIVE_EDGE_EN (0x80) +#define SD_ACTIVE_EDGE_DI (0x7F) + +/* Bit masks for HD Mode Register 6 */ +#define HD_RGB_INPUT_EN (0x02) +#define HD_RGB_INPUT_DI (0xFD) +#define HD_PBPR_SYNC_EN (0x04) +#define HD_PBPR_SYNC_DI (0xFB) +#define HD_DAC_SWAP_EN (0x08) +#define HD_DAC_SWAP_DI (0xF7) +#define HD_GAMMA_CURVE_A (0xEF) +#define HD_GAMMA_CURVE_B (0x10) +#define HD_GAMMA_EN (0x20) +#define HD_GAMMA_DI (0xDF) +#define HD_ADPT_FLTR_MODEB (0x40) +#define HD_ADPT_FLTR_MODEA (0xBF) +#define HD_ADPT_FLTR_EN (0x80) +#define HD_ADPT_FLTR_DI (0x7F) + +#define ADV7343_BRIGHTNESS_MAX (127) +#define ADV7343_BRIGHTNESS_MIN (0) +#define ADV7343_BRIGHTNESS_DEF (3) +#define ADV7343_HUE_MAX (255) +#define ADV7343_HUE_MIN (0) +#define ADV7343_HUE_DEF (127) +#define ADV7343_GAIN_MAX (64) +#define ADV7343_GAIN_MIN (-64) +#define ADV7343_GAIN_DEF (0) + +#endif diff --git a/drivers/media/i2c/adv7393.c b/drivers/media/i2c/adv7393.c new file mode 100644 index 00000000..3dc6098c --- /dev/null +++ b/drivers/media/i2c/adv7393.c @@ -0,0 +1,487 @@ +/* + * adv7393 - ADV7393 Video Encoder Driver + * + * The encoder hardware does not support SECAM. + * + * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/ + * Benoît Thébaudeau + * + * Based on ADV7343 driver, + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "adv7393_regs.h" + +MODULE_DESCRIPTION("ADV7393 video encoder driver"); +MODULE_LICENSE("GPL"); + +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +struct adv7393_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + u8 reg00; + u8 reg01; + u8 reg02; + u8 reg35; + u8 reg80; + u8 reg82; + u32 output; + v4l2_std_id std; +}; + +static inline struct adv7393_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7393_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7393_state, hdl)->sd; +} + +static inline int adv7393_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static const u8 adv7393_init_reg_val[] = { + ADV7393_SOFT_RESET, ADV7393_SOFT_RESET_DEFAULT, + ADV7393_POWER_MODE_REG, ADV7393_POWER_MODE_REG_DEFAULT, + + ADV7393_HD_MODE_REG1, ADV7393_HD_MODE_REG1_DEFAULT, + ADV7393_HD_MODE_REG2, ADV7393_HD_MODE_REG2_DEFAULT, + ADV7393_HD_MODE_REG3, ADV7393_HD_MODE_REG3_DEFAULT, + ADV7393_HD_MODE_REG4, ADV7393_HD_MODE_REG4_DEFAULT, + ADV7393_HD_MODE_REG5, ADV7393_HD_MODE_REG5_DEFAULT, + ADV7393_HD_MODE_REG6, ADV7393_HD_MODE_REG6_DEFAULT, + ADV7393_HD_MODE_REG7, ADV7393_HD_MODE_REG7_DEFAULT, + + ADV7393_SD_MODE_REG1, ADV7393_SD_MODE_REG1_DEFAULT, + ADV7393_SD_MODE_REG2, ADV7393_SD_MODE_REG2_DEFAULT, + ADV7393_SD_MODE_REG3, ADV7393_SD_MODE_REG3_DEFAULT, + ADV7393_SD_MODE_REG4, ADV7393_SD_MODE_REG4_DEFAULT, + ADV7393_SD_MODE_REG5, ADV7393_SD_MODE_REG5_DEFAULT, + ADV7393_SD_MODE_REG6, ADV7393_SD_MODE_REG6_DEFAULT, + ADV7393_SD_MODE_REG7, ADV7393_SD_MODE_REG7_DEFAULT, + ADV7393_SD_MODE_REG8, ADV7393_SD_MODE_REG8_DEFAULT, + + ADV7393_SD_TIMING_REG0, ADV7393_SD_TIMING_REG0_DEFAULT, + + ADV7393_SD_HUE_ADJUST, ADV7393_SD_HUE_ADJUST_DEFAULT, + ADV7393_SD_CGMS_WSS0, ADV7393_SD_CGMS_WSS0_DEFAULT, + ADV7393_SD_BRIGHTNESS_WSS, ADV7393_SD_BRIGHTNESS_WSS_DEFAULT, +}; + +/* + * 2^32 + * FSC(reg) = FSC (HZ) * -------- + * 27000000 + */ +static const struct adv7393_std_info stdinfo[] = { + { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443, + }, { + /* FSC(Hz) = 3,579,545.45 Hz */ + SD_STD_NTSC, 569408542, V4L2_STD_NTSC, + }, { + /* FSC(Hz) = 3,575,611.00 Hz */ + SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M, + }, { + /* FSC(Hz) = 3,582,056.00 Hz */ + SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL, + }, +}; + +static int adv7393_setstd(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7393_state *state = to_state(sd); + const struct adv7393_std_info *std_info; + int num_std; + u8 reg; + u32 val; + int err = 0; + int i; + + num_std = ARRAY_SIZE(stdinfo); + + for (i = 0; i < num_std; i++) { + if (stdinfo[i].stdid & std) + break; + } + + if (i == num_std) { + v4l2_dbg(1, debug, sd, + "Invalid std or std is not supported: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + + std_info = &stdinfo[i]; + + /* Set the standard */ + val = state->reg80 & ~SD_STD_MASK; + val |= std_info->standard_val3; + err = adv7393_write(sd, ADV7393_SD_MODE_REG1, val); + if (err < 0) + goto setstd_exit; + + state->reg80 = val; + + /* Configure the input mode register */ + val = state->reg01 & ~INPUT_MODE_MASK; + val |= SD_INPUT_MODE; + err = adv7393_write(sd, ADV7393_MODE_SELECT_REG, val); + if (err < 0) + goto setstd_exit; + + state->reg01 = val; + + /* Program the sub carrier frequency registers */ + val = std_info->fsc_val; + for (reg = ADV7393_FSC_REG0; reg <= ADV7393_FSC_REG3; reg++) { + err = adv7393_write(sd, reg, val); + if (err < 0) + goto setstd_exit; + val >>= 8; + } + + val = state->reg82; + + /* Pedestal settings */ + if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443)) + val |= SD_PEDESTAL_EN; + else + val &= SD_PEDESTAL_DI; + + err = adv7393_write(sd, ADV7393_SD_MODE_REG2, val); + if (err < 0) + goto setstd_exit; + + state->reg82 = val; + +setstd_exit: + if (err != 0) + v4l2_err(sd, "Error setting std, write failed\n"); + + return err; +} + +static int adv7393_setoutput(struct v4l2_subdev *sd, u32 output_type) +{ + struct adv7393_state *state = to_state(sd); + u8 val; + int err = 0; + + if (output_type > ADV7393_SVIDEO_ID) { + v4l2_dbg(1, debug, sd, + "Invalid output type or output type not supported:%d\n", + output_type); + return -EINVAL; + } + + /* Enable Appropriate DAC */ + val = state->reg00 & 0x03; + + if (output_type == ADV7393_COMPOSITE_ID) + val |= ADV7393_COMPOSITE_POWER_VALUE; + else if (output_type == ADV7393_COMPONENT_ID) + val |= ADV7393_COMPONENT_POWER_VALUE; + else + val |= ADV7393_SVIDEO_POWER_VALUE; + + err = adv7393_write(sd, ADV7393_POWER_MODE_REG, val); + if (err < 0) + goto setoutput_exit; + + state->reg00 = val; + + /* Enable YUV output */ + val = state->reg02 | YUV_OUTPUT_SELECT; + err = adv7393_write(sd, ADV7393_MODE_REG0, val); + if (err < 0) + goto setoutput_exit; + + state->reg02 = val; + + /* configure SD DAC Output 1 bit */ + val = state->reg82; + if (output_type == ADV7393_COMPONENT_ID) + val &= SD_DAC_OUT1_DI; + else + val |= SD_DAC_OUT1_EN; + err = adv7393_write(sd, ADV7393_SD_MODE_REG2, val); + if (err < 0) + goto setoutput_exit; + + state->reg82 = val; + + /* configure ED/HD Color DAC Swap bit to zero */ + val = state->reg35 & HD_DAC_SWAP_DI; + err = adv7393_write(sd, ADV7393_HD_MODE_REG6, val); + if (err < 0) + goto setoutput_exit; + + state->reg35 = val; + +setoutput_exit: + if (err != 0) + v4l2_err(sd, "Error setting output, write failed\n"); + + return err; +} + +static int adv7393_log_status(struct v4l2_subdev *sd) +{ + struct adv7393_state *state = to_state(sd); + + v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std); + v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" : + ((state->output == 1) ? "Component" : "S-Video")); + return 0; +} + +static int adv7393_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + return adv7393_write(sd, ADV7393_SD_BRIGHTNESS_WSS, + ctrl->val & SD_BRIGHTNESS_VALUE_MASK); + + case V4L2_CID_HUE: + return adv7393_write(sd, ADV7393_SD_HUE_ADJUST, + ctrl->val - ADV7393_HUE_MIN); + + case V4L2_CID_GAIN: + return adv7393_write(sd, ADV7393_DAC123_OUTPUT_LEVEL, + ctrl->val); + } + return -EINVAL; +} + +static int adv7393_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7393, 0); +} + +static const struct v4l2_ctrl_ops adv7393_ctrl_ops = { + .s_ctrl = adv7393_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7393_core_ops = { + .log_status = adv7393_log_status, + .g_chip_ident = adv7393_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static int adv7393_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7393_state *state = to_state(sd); + int err = 0; + + if (state->std == std) + return 0; + + err = adv7393_setstd(sd, std); + if (!err) + state->std = std; + + return err; +} + +static int adv7393_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7393_state *state = to_state(sd); + int err = 0; + + if (state->output == output) + return 0; + + err = adv7393_setoutput(sd, output); + if (!err) + state->output = output; + + return err; +} + +static const struct v4l2_subdev_video_ops adv7393_video_ops = { + .s_std_output = adv7393_s_std_output, + .s_routing = adv7393_s_routing, +}; + +static const struct v4l2_subdev_ops adv7393_ops = { + .core = &adv7393_core_ops, + .video = &adv7393_video_ops, +}; + +static int adv7393_initialize(struct v4l2_subdev *sd) +{ + struct adv7393_state *state = to_state(sd); + int err = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(adv7393_init_reg_val); i += 2) { + + err = adv7393_write(sd, adv7393_init_reg_val[i], + adv7393_init_reg_val[i+1]); + if (err) { + v4l2_err(sd, "Error initializing\n"); + return err; + } + } + + /* Configure for default video standard */ + err = adv7393_setoutput(sd, state->output); + if (err < 0) { + v4l2_err(sd, "Error setting output during init\n"); + return -EINVAL; + } + + err = adv7393_setstd(sd, state->std); + if (err < 0) { + v4l2_err(sd, "Error setting std during init\n"); + return -EINVAL; + } + + return err; +} + +static int adv7393_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7393_state *state; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct adv7393_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + state->reg00 = ADV7393_POWER_MODE_REG_DEFAULT; + state->reg01 = 0x00; + state->reg02 = 0x20; + state->reg35 = ADV7393_HD_MODE_REG6_DEFAULT; + state->reg80 = ADV7393_SD_MODE_REG1_DEFAULT; + state->reg82 = ADV7393_SD_MODE_REG2_DEFAULT; + + state->output = ADV7393_COMPOSITE_ID; + state->std = V4L2_STD_NTSC; + + v4l2_i2c_subdev_init(&state->sd, client, &adv7393_ops); + + v4l2_ctrl_handler_init(&state->hdl, 3); + v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops, + V4L2_CID_BRIGHTNESS, ADV7393_BRIGHTNESS_MIN, + ADV7393_BRIGHTNESS_MAX, 1, + ADV7393_BRIGHTNESS_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops, + V4L2_CID_HUE, ADV7393_HUE_MIN, + ADV7393_HUE_MAX, 1, + ADV7393_HUE_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops, + V4L2_CID_GAIN, ADV7393_GAIN_MIN, + ADV7393_GAIN_MAX, 1, + ADV7393_GAIN_DEF); + state->sd.ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_handler_setup(&state->hdl); + + err = adv7393_initialize(&state->sd); + if (err) { + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + } + return err; +} + +static int adv7393_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7393_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + + return 0; +} + +static const struct i2c_device_id adv7393_id[] = { + {"adv7393", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, adv7393_id); + +static struct i2c_driver adv7393_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7393", + }, + .probe = adv7393_probe, + .remove = adv7393_remove, + .id_table = adv7393_id, +}; +module_i2c_driver(adv7393_driver); diff --git a/drivers/media/i2c/adv7393_regs.h b/drivers/media/i2c/adv7393_regs.h new file mode 100644 index 00000000..78968330 --- /dev/null +++ b/drivers/media/i2c/adv7393_regs.h @@ -0,0 +1,188 @@ +/* + * ADV7393 encoder related structure and register definitions + * + * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/ + * Benoît Thébaudeau + * + * Based on ADV7343 driver, + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ADV7393_REGS_H +#define ADV7393_REGS_H + +struct adv7393_std_info { + u32 standard_val3; + u32 fsc_val; + v4l2_std_id stdid; +}; + +/* Register offset macros */ +#define ADV7393_POWER_MODE_REG (0x00) +#define ADV7393_MODE_SELECT_REG (0x01) +#define ADV7393_MODE_REG0 (0x02) + +#define ADV7393_DAC123_OUTPUT_LEVEL (0x0B) + +#define ADV7393_SOFT_RESET (0x17) + +#define ADV7393_HD_MODE_REG1 (0x30) +#define ADV7393_HD_MODE_REG2 (0x31) +#define ADV7393_HD_MODE_REG3 (0x32) +#define ADV7393_HD_MODE_REG4 (0x33) +#define ADV7393_HD_MODE_REG5 (0x34) +#define ADV7393_HD_MODE_REG6 (0x35) + +#define ADV7393_HD_MODE_REG7 (0x39) + +#define ADV7393_SD_MODE_REG1 (0x80) +#define ADV7393_SD_MODE_REG2 (0x82) +#define ADV7393_SD_MODE_REG3 (0x83) +#define ADV7393_SD_MODE_REG4 (0x84) +#define ADV7393_SD_MODE_REG5 (0x86) +#define ADV7393_SD_MODE_REG6 (0x87) +#define ADV7393_SD_MODE_REG7 (0x88) +#define ADV7393_SD_MODE_REG8 (0x89) + +#define ADV7393_SD_TIMING_REG0 (0x8A) + +#define ADV7393_FSC_REG0 (0x8C) +#define ADV7393_FSC_REG1 (0x8D) +#define ADV7393_FSC_REG2 (0x8E) +#define ADV7393_FSC_REG3 (0x8F) + +#define ADV7393_SD_CGMS_WSS0 (0x99) + +#define ADV7393_SD_HUE_ADJUST (0xA0) +#define ADV7393_SD_BRIGHTNESS_WSS (0xA1) + +/* Default values for the registers */ +#define ADV7393_POWER_MODE_REG_DEFAULT (0x10) +#define ADV7393_HD_MODE_REG1_DEFAULT (0x3C) /* Changed Default + 720p EAV/SAV code*/ +#define ADV7393_HD_MODE_REG2_DEFAULT (0x01) /* Changed Pixel data + valid */ +#define ADV7393_HD_MODE_REG3_DEFAULT (0x00) /* Color delay 0 clks */ +#define ADV7393_HD_MODE_REG4_DEFAULT (0xEC) /* Changed */ +#define ADV7393_HD_MODE_REG5_DEFAULT (0x08) +#define ADV7393_HD_MODE_REG6_DEFAULT (0x00) +#define ADV7393_HD_MODE_REG7_DEFAULT (0x00) +#define ADV7393_SOFT_RESET_DEFAULT (0x02) +#define ADV7393_COMPOSITE_POWER_VALUE (0x10) +#define ADV7393_COMPONENT_POWER_VALUE (0x1C) +#define ADV7393_SVIDEO_POWER_VALUE (0x0C) +#define ADV7393_SD_HUE_ADJUST_DEFAULT (0x80) +#define ADV7393_SD_BRIGHTNESS_WSS_DEFAULT (0x00) + +#define ADV7393_SD_CGMS_WSS0_DEFAULT (0x10) + +#define ADV7393_SD_MODE_REG1_DEFAULT (0x10) +#define ADV7393_SD_MODE_REG2_DEFAULT (0xC9) +#define ADV7393_SD_MODE_REG3_DEFAULT (0x00) +#define ADV7393_SD_MODE_REG4_DEFAULT (0x00) +#define ADV7393_SD_MODE_REG5_DEFAULT (0x02) +#define ADV7393_SD_MODE_REG6_DEFAULT (0x8C) +#define ADV7393_SD_MODE_REG7_DEFAULT (0x14) +#define ADV7393_SD_MODE_REG8_DEFAULT (0x00) + +#define ADV7393_SD_TIMING_REG0_DEFAULT (0x0C) + +/* Bit masks for Mode Select Register */ +#define INPUT_MODE_MASK (0x70) +#define SD_INPUT_MODE (0x00) +#define HD_720P_INPUT_MODE (0x10) +#define HD_1080I_INPUT_MODE (0x10) + +/* Bit masks for Mode Register 0 */ +#define TEST_PATTERN_BLACK_BAR_EN (0x04) +#define YUV_OUTPUT_SELECT (0x20) +#define RGB_OUTPUT_SELECT (0xDF) + +/* Bit masks for SD brightness/WSS */ +#define SD_BRIGHTNESS_VALUE_MASK (0x7F) +#define SD_BLANK_WSS_DATA_MASK (0x80) + +/* Bit masks for soft reset register */ +#define SOFT_RESET (0x02) + +/* Bit masks for HD Mode Register 1 */ +#define OUTPUT_STD_MASK (0x03) +#define OUTPUT_STD_SHIFT (0) +#define OUTPUT_STD_EIA0_2 (0x00) +#define OUTPUT_STD_EIA0_1 (0x01) +#define OUTPUT_STD_FULL (0x02) +#define EMBEDDED_SYNC (0x04) +#define EXTERNAL_SYNC (0xFB) +#define STD_MODE_MASK (0x1F) +#define STD_MODE_SHIFT (3) +#define STD_MODE_720P (0x05) +#define STD_MODE_720P_25 (0x08) +#define STD_MODE_720P_30 (0x07) +#define STD_MODE_720P_50 (0x06) +#define STD_MODE_1080I (0x0D) +#define STD_MODE_1080I_25 (0x0E) +#define STD_MODE_1080P_24 (0x11) +#define STD_MODE_1080P_25 (0x10) +#define STD_MODE_1080P_30 (0x0F) +#define STD_MODE_525P (0x00) +#define STD_MODE_625P (0x03) + +/* Bit masks for SD Mode Register 1 */ +#define SD_STD_MASK (0x03) +#define SD_STD_NTSC (0x00) +#define SD_STD_PAL_BDGHI (0x01) +#define SD_STD_PAL_M (0x02) +#define SD_STD_PAL_N (0x03) +#define SD_LUMA_FLTR_MASK (0x07) +#define SD_LUMA_FLTR_SHIFT (2) +#define SD_CHROMA_FLTR_MASK (0x07) +#define SD_CHROMA_FLTR_SHIFT (5) + +/* Bit masks for SD Mode Register 2 */ +#define SD_PRPB_SSAF_EN (0x01) +#define SD_PRPB_SSAF_DI (0xFE) +#define SD_DAC_OUT1_EN (0x02) +#define SD_DAC_OUT1_DI (0xFD) +#define SD_PEDESTAL_EN (0x08) +#define SD_PEDESTAL_DI (0xF7) +#define SD_SQUARE_PIXEL_EN (0x10) +#define SD_SQUARE_PIXEL_DI (0xEF) +#define SD_PIXEL_DATA_VALID (0x40) +#define SD_ACTIVE_EDGE_EN (0x80) +#define SD_ACTIVE_EDGE_DI (0x7F) + +/* Bit masks for HD Mode Register 6 */ +#define HD_PRPB_SYNC_EN (0x04) +#define HD_PRPB_SYNC_DI (0xFB) +#define HD_DAC_SWAP_EN (0x08) +#define HD_DAC_SWAP_DI (0xF7) +#define HD_GAMMA_CURVE_A (0xEF) +#define HD_GAMMA_CURVE_B (0x10) +#define HD_GAMMA_EN (0x20) +#define HD_GAMMA_DI (0xDF) +#define HD_ADPT_FLTR_MODEA (0xBF) +#define HD_ADPT_FLTR_MODEB (0x40) +#define HD_ADPT_FLTR_EN (0x80) +#define HD_ADPT_FLTR_DI (0x7F) + +#define ADV7393_BRIGHTNESS_MAX (63) +#define ADV7393_BRIGHTNESS_MIN (-64) +#define ADV7393_BRIGHTNESS_DEF (0) +#define ADV7393_HUE_MAX (127) +#define ADV7393_HUE_MIN (-128) +#define ADV7393_HUE_DEF (0) +#define ADV7393_GAIN_MAX (64) +#define ADV7393_GAIN_MIN (-64) +#define ADV7393_GAIN_DEF (0) + +#endif diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c new file mode 100644 index 00000000..31a63c93 --- /dev/null +++ b/drivers/media/i2c/adv7604.c @@ -0,0 +1,2136 @@ +/* + * adv7604 - Analog Devices ADV7604 video decoder driver + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +/* + * References (c = chapter, p = page): + * REF_01 - Analog devices, ADV7604, Register Settings Recommendations, + * Revision 2.5, June 2010 + * REF_02 - Analog devices, Register map documentation, Documentation of + * the register maps, Software manual, Rev. F, June 2010 + * REF_03 - Analog devices, ADV7604, Hardware Manual, Rev. F, August 2010 + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +MODULE_DESCRIPTION("Analog Devices ADV7604 video decoder driver"); +MODULE_AUTHOR("Hans Verkuil "); +MODULE_AUTHOR("Mats Randgaard "); +MODULE_LICENSE("GPL"); + +/* ADV7604 system clock frequency */ +#define ADV7604_fsc (28636360) + +#define DIGITAL_INPUT (state->mode == ADV7604_MODE_HDMI) + +/* + ********************************************************************** + * + * Arrays with configuration parameters for the ADV7604 + * + ********************************************************************** + */ +struct adv7604_state { + struct adv7604_platform_data pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + enum adv7604_mode mode; + struct v4l2_dv_timings timings; + u8 edid[256]; + unsigned edid_blocks; + struct v4l2_fract aspect_ratio; + u32 rgb_quantization_range; + struct workqueue_struct *work_queues; + struct delayed_work delayed_work_enable_hotplug; + bool connector_hdmi; + bool restart_stdi_once; + + /* i2c clients */ + struct i2c_client *i2c_avlink; + struct i2c_client *i2c_cec; + struct i2c_client *i2c_infoframe; + struct i2c_client *i2c_esdp; + struct i2c_client *i2c_dpp; + struct i2c_client *i2c_afe; + struct i2c_client *i2c_repeater; + struct i2c_client *i2c_edid; + struct i2c_client *i2c_hdmi; + struct i2c_client *i2c_test; + struct i2c_client *i2c_cp; + struct i2c_client *i2c_vdp; + + /* controls */ + struct v4l2_ctrl *detect_tx_5v_ctrl; + struct v4l2_ctrl *analog_sampling_phase_ctrl; + struct v4l2_ctrl *free_run_color_manual_ctrl; + struct v4l2_ctrl *free_run_color_ctrl; + struct v4l2_ctrl *rgb_quantization_range_ctrl; +}; + +/* Supported CEA and DMT timings */ +static const struct v4l2_dv_timings adv7604_timings[] = { + V4L2_DV_BT_CEA_720X480P59_94, + V4L2_DV_BT_CEA_720X576P50, + V4L2_DV_BT_CEA_1280X720P24, + V4L2_DV_BT_CEA_1280X720P25, + V4L2_DV_BT_CEA_1280X720P50, + V4L2_DV_BT_CEA_1280X720P60, + V4L2_DV_BT_CEA_1920X1080P24, + V4L2_DV_BT_CEA_1920X1080P25, + V4L2_DV_BT_CEA_1920X1080P30, + V4L2_DV_BT_CEA_1920X1080P50, + V4L2_DV_BT_CEA_1920X1080P60, + + /* sorted by DMT ID */ + V4L2_DV_BT_DMT_640X350P85, + V4L2_DV_BT_DMT_640X400P85, + V4L2_DV_BT_DMT_720X400P85, + V4L2_DV_BT_DMT_640X480P60, + V4L2_DV_BT_DMT_640X480P72, + V4L2_DV_BT_DMT_640X480P75, + V4L2_DV_BT_DMT_640X480P85, + V4L2_DV_BT_DMT_800X600P56, + V4L2_DV_BT_DMT_800X600P60, + V4L2_DV_BT_DMT_800X600P72, + V4L2_DV_BT_DMT_800X600P75, + V4L2_DV_BT_DMT_800X600P85, + V4L2_DV_BT_DMT_848X480P60, + V4L2_DV_BT_DMT_1024X768P60, + V4L2_DV_BT_DMT_1024X768P70, + V4L2_DV_BT_DMT_1024X768P75, + V4L2_DV_BT_DMT_1024X768P85, + V4L2_DV_BT_DMT_1152X864P75, + V4L2_DV_BT_DMT_1280X768P60_RB, + V4L2_DV_BT_DMT_1280X768P60, + V4L2_DV_BT_DMT_1280X768P75, + V4L2_DV_BT_DMT_1280X768P85, + V4L2_DV_BT_DMT_1280X800P60_RB, + V4L2_DV_BT_DMT_1280X800P60, + V4L2_DV_BT_DMT_1280X800P75, + V4L2_DV_BT_DMT_1280X800P85, + V4L2_DV_BT_DMT_1280X960P60, + V4L2_DV_BT_DMT_1280X960P85, + V4L2_DV_BT_DMT_1280X1024P60, + V4L2_DV_BT_DMT_1280X1024P75, + V4L2_DV_BT_DMT_1280X1024P85, + V4L2_DV_BT_DMT_1360X768P60, + V4L2_DV_BT_DMT_1400X1050P60_RB, + V4L2_DV_BT_DMT_1400X1050P60, + V4L2_DV_BT_DMT_1400X1050P75, + V4L2_DV_BT_DMT_1400X1050P85, + V4L2_DV_BT_DMT_1440X900P60_RB, + V4L2_DV_BT_DMT_1440X900P60, + V4L2_DV_BT_DMT_1600X1200P60, + V4L2_DV_BT_DMT_1680X1050P60_RB, + V4L2_DV_BT_DMT_1680X1050P60, + V4L2_DV_BT_DMT_1792X1344P60, + V4L2_DV_BT_DMT_1856X1392P60, + V4L2_DV_BT_DMT_1920X1200P60_RB, + V4L2_DV_BT_DMT_1366X768P60, + V4L2_DV_BT_DMT_1920X1080P60, + { }, +}; + +struct adv7604_video_standards { + struct v4l2_dv_timings timings; + u8 vid_std; + u8 v_freq; +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_comp[] = { + /* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */ + { V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 }, + { V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 }, + { V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 }, + { V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 }, + { V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 }, + { V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 }, + { V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 }, + { V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 }, + /* TODO add 1920x1080P60_RB (CVT timing) */ + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_gr[] = { + { V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 }, + { V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 }, + { V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 }, + { V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 }, + { V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 }, + { V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 }, + { V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 }, + { V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 }, + { V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 }, + { V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 }, + { V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 }, + { V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 }, + { V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 }, + { V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */ + /* TODO add 1600X1200P60_RB (not a DMT timing) */ + { V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 }, + { V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */ + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_hdmi_comp[] = { + { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, + { V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 }, + { V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 }, + { V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 }, + { V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 }, + { V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 }, + { V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 }, + { V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 }, + { V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 }, + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_hdmi_gr[] = { + { V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 }, + { V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 }, + { V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 }, + { V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 }, + { V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 }, + { V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 }, + { V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 }, + { V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 }, + { V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 }, + { }, +}; + +/* ----------------------------------------------------------------------- */ + +static inline struct adv7604_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7604_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7604_state, hdl)->sd; +} + +static inline unsigned hblanking(const struct v4l2_bt_timings *t) +{ + return t->hfrontporch + t->hsync + t->hbackporch; +} + +static inline unsigned htotal(const struct v4l2_bt_timings *t) +{ + return t->width + t->hfrontporch + t->hsync + t->hbackporch; +} + +static inline unsigned vblanking(const struct v4l2_bt_timings *t) +{ + return t->vfrontporch + t->vsync + t->vbackporch; +} + +static inline unsigned vtotal(const struct v4l2_bt_timings *t) +{ + return t->height + t->vfrontporch + t->vsync + t->vbackporch; +} + +/* ----------------------------------------------------------------------- */ + +static s32 adv_smbus_read_byte_data_check(struct i2c_client *client, + u8 command, bool check) +{ + union i2c_smbus_data data; + + if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data)) + return data.byte; + if (check) + v4l_err(client, "error reading %02x, %02x\n", + client->addr, command); + return -EIO; +} + +static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command) +{ + return adv_smbus_read_byte_data_check(client, command, true); +} + +static s32 adv_smbus_write_byte_data(struct i2c_client *client, + u8 command, u8 value) +{ + union i2c_smbus_data data; + int err; + int i; + + data.byte = value; + for (i = 0; i < 3; i++) { + err = i2c_smbus_xfer(client->adapter, client->addr, + client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BYTE_DATA, &data); + if (!err) + break; + } + if (err < 0) + v4l_err(client, "error writing %02x, %02x, %02x\n", + client->addr, command, value); + return err; +} + +static s32 adv_smbus_write_i2c_block_data(struct i2c_client *client, + u8 command, unsigned length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(data.block + 1, values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); +} + +/* ----------------------------------------------------------------------- */ + +static inline int io_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return adv_smbus_read_byte_data(client, reg); +} + +static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return adv_smbus_write_byte_data(client, reg, val); +} + +static inline int io_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) +{ + return io_write(sd, reg, (io_read(sd, reg) & mask) | val); +} + +static inline int avlink_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_avlink, reg); +} + +static inline int avlink_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_avlink, reg, val); +} + +static inline int cec_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_cec, reg); +} + +static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_cec, reg, val); +} + +static inline int cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) +{ + return cec_write(sd, reg, (cec_read(sd, reg) & mask) | val); +} + +static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_infoframe, reg); +} + +static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_infoframe, reg, val); +} + +static inline int esdp_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_esdp, reg); +} + +static inline int esdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_esdp, reg, val); +} + +static inline int dpp_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_dpp, reg); +} + +static inline int dpp_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_dpp, reg, val); +} + +static inline int afe_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_afe, reg); +} + +static inline int afe_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_afe, reg, val); +} + +static inline int rep_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_repeater, reg); +} + +static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_repeater, reg, val); +} + +static inline int rep_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) +{ + return rep_write(sd, reg, (rep_read(sd, reg) & mask) | val); +} + +static inline int edid_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_edid, reg); +} + +static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_edid, reg, val); +} + +static inline int edid_read_block(struct v4l2_subdev *sd, unsigned len, u8 *val) +{ + struct adv7604_state *state = to_state(sd); + struct i2c_client *client = state->i2c_edid; + u8 msgbuf0[1] = { 0 }; + u8 msgbuf1[256]; + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .len = 1, + .buf = msgbuf0 + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = msgbuf1 + }, + }; + + if (i2c_transfer(client->adapter, msg, 2) < 0) + return -EIO; + memcpy(val, msgbuf1, len); + return 0; +} + +static void adv7604_delayed_work_enable_hotplug(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct adv7604_state *state = container_of(dwork, struct adv7604_state, + delayed_work_enable_hotplug); + struct v4l2_subdev *sd = &state->sd; + + v4l2_dbg(2, debug, sd, "%s: enable hotplug\n", __func__); + + v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)1); +} + +static inline int edid_write_block(struct v4l2_subdev *sd, + unsigned len, const u8 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct adv7604_state *state = to_state(sd); + int err = 0; + int i; + + v4l2_dbg(2, debug, sd, "%s: write EDID block (%d byte)\n", __func__, len); + + v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); + + /* Disables I2C access to internal EDID ram from DDC port */ + rep_write_and_or(sd, 0x77, 0xf0, 0x0); + + for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX) + err = adv_smbus_write_i2c_block_data(state->i2c_edid, i, + I2C_SMBUS_BLOCK_MAX, val + i); + if (err) + return err; + + /* adv7604 calculates the checksums and enables I2C access to internal + EDID ram from DDC port. */ + rep_write_and_or(sd, 0x77, 0xf0, 0x1); + + for (i = 0; i < 1000; i++) { + if (rep_read(sd, 0x7d) & 1) + break; + mdelay(1); + } + if (i == 1000) { + v4l_err(client, "error enabling edid\n"); + return -EIO; + } + + /* enable hotplug after 100 ms */ + queue_delayed_work(state->work_queues, + &state->delayed_work_enable_hotplug, HZ / 10); + return 0; +} + +static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_hdmi, reg); +} + +static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_hdmi, reg, val); +} + +static inline int test_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_test, reg); +} + +static inline int test_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_test, reg, val); +} + +static inline int cp_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_cp, reg); +} + +static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_cp, reg, val); +} + +static inline int cp_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) +{ + return cp_write(sd, reg, (cp_read(sd, reg) & mask) | val); +} + +static inline int vdp_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_vdp, reg); +} + +static inline int vdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_vdp, reg, val); +} + +/* ----------------------------------------------------------------------- */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static void adv7604_inv_register(struct v4l2_subdev *sd) +{ + v4l2_info(sd, "0x000-0x0ff: IO Map\n"); + v4l2_info(sd, "0x100-0x1ff: AVLink Map\n"); + v4l2_info(sd, "0x200-0x2ff: CEC Map\n"); + v4l2_info(sd, "0x300-0x3ff: InfoFrame Map\n"); + v4l2_info(sd, "0x400-0x4ff: ESDP Map\n"); + v4l2_info(sd, "0x500-0x5ff: DPP Map\n"); + v4l2_info(sd, "0x600-0x6ff: AFE Map\n"); + v4l2_info(sd, "0x700-0x7ff: Repeater Map\n"); + v4l2_info(sd, "0x800-0x8ff: EDID Map\n"); + v4l2_info(sd, "0x900-0x9ff: HDMI Map\n"); + v4l2_info(sd, "0xa00-0xaff: Test Map\n"); + v4l2_info(sd, "0xb00-0xbff: CP Map\n"); + v4l2_info(sd, "0xc00-0xcff: VDP Map\n"); +} + +static int adv7604_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 1; + switch (reg->reg >> 8) { + case 0: + reg->val = io_read(sd, reg->reg & 0xff); + break; + case 1: + reg->val = avlink_read(sd, reg->reg & 0xff); + break; + case 2: + reg->val = cec_read(sd, reg->reg & 0xff); + break; + case 3: + reg->val = infoframe_read(sd, reg->reg & 0xff); + break; + case 4: + reg->val = esdp_read(sd, reg->reg & 0xff); + break; + case 5: + reg->val = dpp_read(sd, reg->reg & 0xff); + break; + case 6: + reg->val = afe_read(sd, reg->reg & 0xff); + break; + case 7: + reg->val = rep_read(sd, reg->reg & 0xff); + break; + case 8: + reg->val = edid_read(sd, reg->reg & 0xff); + break; + case 9: + reg->val = hdmi_read(sd, reg->reg & 0xff); + break; + case 0xa: + reg->val = test_read(sd, reg->reg & 0xff); + break; + case 0xb: + reg->val = cp_read(sd, reg->reg & 0xff); + break; + case 0xc: + reg->val = vdp_read(sd, reg->reg & 0xff); + break; + default: + v4l2_info(sd, "Register %03llx not supported\n", reg->reg); + adv7604_inv_register(sd); + break; + } + return 0; +} + +static int adv7604_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + switch (reg->reg >> 8) { + case 0: + io_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 1: + avlink_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 2: + cec_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 3: + infoframe_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 4: + esdp_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 5: + dpp_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 6: + afe_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 7: + rep_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 8: + edid_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 9: + hdmi_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 0xa: + test_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 0xb: + cp_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 0xc: + vdp_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + default: + v4l2_info(sd, "Register %03llx not supported\n", reg->reg); + adv7604_inv_register(sd); + break; + } + return 0; +} +#endif + +static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + + /* port A only */ + return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, + ((io_read(sd, 0x6f) & 0x10) >> 4)); +} + +static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd, + u8 prim_mode, + const struct adv7604_video_standards *predef_vid_timings, + const struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + int i; + + for (i = 0; predef_vid_timings[i].timings.bt.width; i++) { + if (!v4l_match_dv_timings(timings, &predef_vid_timings[i].timings, + DIGITAL_INPUT ? 250000 : 1000000)) + continue; + io_write(sd, 0x00, predef_vid_timings[i].vid_std); /* video std */ + io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) + + prim_mode); /* v_freq and prim mode */ + return 0; + } + + return -1; +} + +static int configure_predefined_video_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + int err; + + v4l2_dbg(1, debug, sd, "%s", __func__); + + /* reset to default values */ + io_write(sd, 0x16, 0x43); + io_write(sd, 0x17, 0x5a); + /* disable embedded syncs for auto graphics mode */ + cp_write_and_or(sd, 0x81, 0xef, 0x00); + cp_write(sd, 0x8f, 0x00); + cp_write(sd, 0x90, 0x00); + cp_write(sd, 0xa2, 0x00); + cp_write(sd, 0xa3, 0x00); + cp_write(sd, 0xa4, 0x00); + cp_write(sd, 0xa5, 0x00); + cp_write(sd, 0xa6, 0x00); + cp_write(sd, 0xa7, 0x00); + cp_write(sd, 0xab, 0x00); + cp_write(sd, 0xac, 0x00); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: + err = find_and_set_predefined_video_timings(sd, + 0x01, adv7604_prim_mode_comp, timings); + if (err) + err = find_and_set_predefined_video_timings(sd, + 0x02, adv7604_prim_mode_gr, timings); + break; + case ADV7604_MODE_HDMI: + err = find_and_set_predefined_video_timings(sd, + 0x05, adv7604_prim_mode_hdmi_comp, timings); + if (err) + err = find_and_set_predefined_video_timings(sd, + 0x06, adv7604_prim_mode_hdmi_gr, timings); + break; + default: + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); + err = -1; + break; + } + + + return err; +} + +static void configure_custom_video_timings(struct v4l2_subdev *sd, + const struct v4l2_bt_timings *bt) +{ + struct adv7604_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u32 width = htotal(bt); + u32 height = vtotal(bt); + u16 cp_start_sav = bt->hsync + bt->hbackporch - 4; + u16 cp_start_eav = width - bt->hfrontporch; + u16 cp_start_vbi = height - bt->vfrontporch; + u16 cp_end_vbi = bt->vsync + bt->vbackporch; + u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ? + ((width * (ADV7604_fsc / 100)) / ((u32)bt->pixelclock / 100)) : 0; + const u8 pll[2] = { + 0xc0 | ((width >> 8) & 0x1f), + width & 0xff + }; + + v4l2_dbg(2, debug, sd, "%s\n", __func__); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: + /* auto graphics */ + io_write(sd, 0x00, 0x07); /* video std */ + io_write(sd, 0x01, 0x02); /* prim mode */ + /* enable embedded syncs for auto graphics mode */ + cp_write_and_or(sd, 0x81, 0xef, 0x10); + + /* Should only be set in auto-graphics mode [REF_02, p. 91-92] */ + /* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */ + /* IO-map reg. 0x16 and 0x17 should be written in sequence */ + if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) { + v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n"); + break; + } + + /* active video - horizontal timing */ + cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff); + cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | + ((cp_start_eav >> 8) & 0x0f)); + cp_write(sd, 0xa4, cp_start_eav & 0xff); + + /* active video - vertical timing */ + cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff); + cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | + ((cp_end_vbi >> 8) & 0xf)); + cp_write(sd, 0xa7, cp_end_vbi & 0xff); + break; + case ADV7604_MODE_HDMI: + /* set default prim_mode/vid_std for HDMI + accoring to [REF_03, c. 4.2] */ + io_write(sd, 0x00, 0x02); /* video std */ + io_write(sd, 0x01, 0x06); /* prim mode */ + break; + default: + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); + break; + } + + cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); + cp_write(sd, 0x90, ch1_fr_ll & 0xff); + cp_write(sd, 0xab, (height >> 4) & 0xff); + cp_write(sd, 0xac, (height & 0x0f) << 4); +} + +static void set_rgb_quantization_range(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + + switch (state->rgb_quantization_range) { + case V4L2_DV_RGB_RANGE_AUTO: + /* automatic */ + if (DIGITAL_INPUT && !(hdmi_read(sd, 0x05) & 0x80)) { + /* receiving DVI-D signal */ + + /* ADV7604 selects RGB limited range regardless of + input format (CE/IT) in automatic mode */ + if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + /* RGB limited range (16-235) */ + io_write_and_or(sd, 0x02, 0x0f, 0x00); + + } else { + /* RGB full range (0-255) */ + io_write_and_or(sd, 0x02, 0x0f, 0x10); + } + } else { + /* receiving HDMI or analog signal, set automode */ + io_write_and_or(sd, 0x02, 0x0f, 0xf0); + } + break; + case V4L2_DV_RGB_RANGE_LIMITED: + /* RGB limited range (16-235) */ + io_write_and_or(sd, 0x02, 0x0f, 0x00); + break; + case V4L2_DV_RGB_RANGE_FULL: + /* RGB full range (0-255) */ + io_write_and_or(sd, 0x02, 0x0f, 0x10); + break; + } +} + + +static int adv7604_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct adv7604_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + cp_write(sd, 0x3c, ctrl->val); + return 0; + case V4L2_CID_CONTRAST: + cp_write(sd, 0x3a, ctrl->val); + return 0; + case V4L2_CID_SATURATION: + cp_write(sd, 0x3b, ctrl->val); + return 0; + case V4L2_CID_HUE: + cp_write(sd, 0x3d, ctrl->val); + return 0; + case V4L2_CID_DV_RX_RGB_RANGE: + state->rgb_quantization_range = ctrl->val; + set_rgb_quantization_range(sd); + return 0; + case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE: + /* Set the analog sampling phase. This is needed to find the + best sampling phase for analog video: an application or + driver has to try a number of phases and analyze the picture + quality before settling on the best performing phase. */ + afe_write(sd, 0xc8, ctrl->val); + return 0; + case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL: + /* Use the default blue color for free running mode, + or supply your own. */ + cp_write_and_or(sd, 0xbf, ~0x04, (ctrl->val << 2)); + return 0; + case V4L2_CID_ADV_RX_FREE_RUN_COLOR: + cp_write(sd, 0xc0, (ctrl->val & 0xff0000) >> 16); + cp_write(sd, 0xc1, (ctrl->val & 0x00ff00) >> 8); + cp_write(sd, 0xc2, (u8)(ctrl->val & 0x0000ff)); + return 0; + } + return -EINVAL; +} + +static int adv7604_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7604, 0); +} + +/* ----------------------------------------------------------------------- */ + +static inline bool no_power(struct v4l2_subdev *sd) +{ + /* Entire chip or CP powered off */ + return io_read(sd, 0x0c) & 0x24; +} + +static inline bool no_signal_tmds(struct v4l2_subdev *sd) +{ + /* TODO port B, C and D */ + return !(io_read(sd, 0x6a) & 0x10); +} + +static inline bool no_lock_tmds(struct v4l2_subdev *sd) +{ + return (io_read(sd, 0x6a) & 0xe0) != 0xe0; +} + +static inline bool no_lock_sspd(struct v4l2_subdev *sd) +{ + /* TODO channel 2 */ + return ((cp_read(sd, 0xb5) & 0xd0) != 0xd0); +} + +static inline bool no_lock_stdi(struct v4l2_subdev *sd) +{ + /* TODO channel 2 */ + return !(cp_read(sd, 0xb1) & 0x80); +} + +static inline bool no_signal(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + bool ret; + + ret = no_power(sd); + + ret |= no_lock_stdi(sd); + ret |= no_lock_sspd(sd); + + if (DIGITAL_INPUT) { + ret |= no_lock_tmds(sd); + ret |= no_signal_tmds(sd); + } + + return ret; +} + +static inline bool no_lock_cp(struct v4l2_subdev *sd) +{ + /* CP has detected a non standard number of lines on the incoming + video compared to what it is configured to receive by s_dv_timings */ + return io_read(sd, 0x12) & 0x01; +} + +static int adv7604_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct adv7604_state *state = to_state(sd); + + *status = 0; + *status |= no_power(sd) ? V4L2_IN_ST_NO_POWER : 0; + *status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0; + if (no_lock_cp(sd)) + *status |= DIGITAL_INPUT ? V4L2_IN_ST_NO_SYNC : V4L2_IN_ST_NO_H_LOCK; + + v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static void adv7604_print_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings, const char *txt, bool detailed) +{ + struct v4l2_bt_timings *bt = &timings->bt; + u32 htot, vtot; + + if (timings->type != V4L2_DV_BT_656_1120) + return; + + htot = htotal(bt); + vtot = vtotal(bt); + + v4l2_info(sd, "%s %dx%d%s%d (%dx%d)", + txt, bt->width, bt->height, bt->interlaced ? "i" : "p", + (htot * vtot) > 0 ? ((u32)bt->pixelclock / + (htot * vtot)) : 0, + htot, vtot); + + if (detailed) { + v4l2_info(sd, " horizontal: fp = %d, %ssync = %d, bp = %d\n", + bt->hfrontporch, + (bt->polarities & V4L2_DV_HSYNC_POS_POL) ? "+" : "-", + bt->hsync, bt->hbackporch); + v4l2_info(sd, " vertical: fp = %d, %ssync = %d, bp = %d\n", + bt->vfrontporch, + (bt->polarities & V4L2_DV_VSYNC_POS_POL) ? "+" : "-", + bt->vsync, bt->vbackporch); + v4l2_info(sd, " pixelclock: %lld, flags: 0x%x, standards: 0x%x\n", + bt->pixelclock, bt->flags, bt->standards); + } +} + +struct stdi_readback { + u16 bl, lcf, lcvs; + u8 hs_pol, vs_pol; + bool interlaced; +}; + +static int stdi2dv_timings(struct v4l2_subdev *sd, + struct stdi_readback *stdi, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + u32 hfreq = (ADV7604_fsc * 8) / stdi->bl; + u32 pix_clk; + int i; + + for (i = 0; adv7604_timings[i].bt.height; i++) { + if (vtotal(&adv7604_timings[i].bt) != stdi->lcf + 1) + continue; + if (adv7604_timings[i].bt.vsync != stdi->lcvs) + continue; + + pix_clk = hfreq * htotal(&adv7604_timings[i].bt); + + if ((pix_clk < adv7604_timings[i].bt.pixelclock + 1000000) && + (pix_clk > adv7604_timings[i].bt.pixelclock - 1000000)) { + *timings = adv7604_timings[i]; + return 0; + } + } + + if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs, + (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | + (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), + timings)) + return 0; + if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs, + (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | + (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), + state->aspect_ratio, timings)) + return 0; + + v4l2_dbg(2, debug, sd, + "%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n", + __func__, stdi->lcvs, stdi->lcf, stdi->bl, + stdi->hs_pol, stdi->vs_pol); + return -1; +} + +static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi) +{ + if (no_lock_stdi(sd) || no_lock_sspd(sd)) { + v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n", __func__); + return -1; + } + + /* read STDI */ + stdi->bl = ((cp_read(sd, 0xb1) & 0x3f) << 8) | cp_read(sd, 0xb2); + stdi->lcf = ((cp_read(sd, 0xb3) & 0x7) << 8) | cp_read(sd, 0xb4); + stdi->lcvs = cp_read(sd, 0xb3) >> 3; + stdi->interlaced = io_read(sd, 0x12) & 0x10; + + /* read SSPD */ + if ((cp_read(sd, 0xb5) & 0x03) == 0x01) { + stdi->hs_pol = ((cp_read(sd, 0xb5) & 0x10) ? + ((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x'); + stdi->vs_pol = ((cp_read(sd, 0xb5) & 0x40) ? + ((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x'); + } else { + stdi->hs_pol = 'x'; + stdi->vs_pol = 'x'; + } + + if (no_lock_stdi(sd) || no_lock_sspd(sd)) { + v4l2_dbg(2, debug, sd, + "%s: signal lost during readout of STDI/SSPD\n", __func__); + return -1; + } + + if (stdi->lcf < 239 || stdi->bl < 8 || stdi->bl == 0x3fff) { + v4l2_dbg(2, debug, sd, "%s: invalid signal\n", __func__); + memset(stdi, 0, sizeof(struct stdi_readback)); + return -1; + } + + v4l2_dbg(2, debug, sd, + "%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n", + __func__, stdi->lcf, stdi->bl, stdi->lcvs, + stdi->hs_pol, stdi->vs_pol, + stdi->interlaced ? "interlaced" : "progressive"); + + return 0; +} + +static int adv7604_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + if (timings->index >= ARRAY_SIZE(adv7604_timings) - 1) + return -EINVAL; + memset(timings->reserved, 0, sizeof(timings->reserved)); + timings->timings = adv7604_timings[timings->index]; + return 0; +} + +static int adv7604_dv_timings_cap(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap) +{ + struct adv7604_state *state = to_state(sd); + + cap->type = V4L2_DV_BT_656_1120; + cap->bt.max_width = 1920; + cap->bt.max_height = 1200; + cap->bt.min_pixelclock = 27000000; + if (DIGITAL_INPUT) + cap->bt.max_pixelclock = 225000000; + else + cap->bt.max_pixelclock = 170000000; + cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | + V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT; + cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | + V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM; + return 0; +} + +/* Fill the optional fields .standards and .flags in struct v4l2_dv_timings + if the format is listed in adv7604_timings[] */ +static void adv7604_fill_optional_dv_timings_fields(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + int i; + + for (i = 0; adv7604_timings[i].bt.width; i++) { + if (v4l_match_dv_timings(timings, &adv7604_timings[i], + DIGITAL_INPUT ? 250000 : 1000000)) { + *timings = adv7604_timings[i]; + break; + } + } +} + +static int adv7604_query_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + struct v4l2_bt_timings *bt = &timings->bt; + struct stdi_readback stdi; + + if (!timings) + return -EINVAL; + + memset(timings, 0, sizeof(struct v4l2_dv_timings)); + + if (no_signal(sd)) { + v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__); + return -ENOLINK; + } + + /* read STDI */ + if (read_stdi(sd, &stdi)) { + v4l2_dbg(1, debug, sd, "%s: STDI/SSPD not locked\n", __func__); + return -ENOLINK; + } + bt->interlaced = stdi.interlaced ? + V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE; + + if (DIGITAL_INPUT) { + timings->type = V4L2_DV_BT_656_1120; + + bt->width = (hdmi_read(sd, 0x07) & 0x0f) * 256 + hdmi_read(sd, 0x08); + bt->height = (hdmi_read(sd, 0x09) & 0x0f) * 256 + hdmi_read(sd, 0x0a); + bt->pixelclock = (hdmi_read(sd, 0x06) * 1000000) + + ((hdmi_read(sd, 0x3b) & 0x30) >> 4) * 250000; + bt->hfrontporch = (hdmi_read(sd, 0x20) & 0x03) * 256 + + hdmi_read(sd, 0x21); + bt->hsync = (hdmi_read(sd, 0x22) & 0x03) * 256 + + hdmi_read(sd, 0x23); + bt->hbackporch = (hdmi_read(sd, 0x24) & 0x03) * 256 + + hdmi_read(sd, 0x25); + bt->vfrontporch = ((hdmi_read(sd, 0x2a) & 0x1f) * 256 + + hdmi_read(sd, 0x2b)) / 2; + bt->vsync = ((hdmi_read(sd, 0x2e) & 0x1f) * 256 + + hdmi_read(sd, 0x2f)) / 2; + bt->vbackporch = ((hdmi_read(sd, 0x32) & 0x1f) * 256 + + hdmi_read(sd, 0x33)) / 2; + bt->polarities = ((hdmi_read(sd, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL : 0) | + ((hdmi_read(sd, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL : 0); + if (bt->interlaced == V4L2_DV_INTERLACED) { + bt->height += (hdmi_read(sd, 0x0b) & 0x0f) * 256 + + hdmi_read(sd, 0x0c); + bt->il_vfrontporch = ((hdmi_read(sd, 0x2c) & 0x1f) * 256 + + hdmi_read(sd, 0x2d)) / 2; + bt->il_vsync = ((hdmi_read(sd, 0x30) & 0x1f) * 256 + + hdmi_read(sd, 0x31)) / 2; + bt->vbackporch = ((hdmi_read(sd, 0x34) & 0x1f) * 256 + + hdmi_read(sd, 0x35)) / 2; + } + adv7604_fill_optional_dv_timings_fields(sd, timings); + } else { + /* find format + * Since LCVS values are inaccurate [REF_03, p. 275-276], + * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails. + */ + if (!stdi2dv_timings(sd, &stdi, timings)) + goto found; + stdi.lcvs += 1; + v4l2_dbg(1, debug, sd, "%s: lcvs + 1 = %d\n", __func__, stdi.lcvs); + if (!stdi2dv_timings(sd, &stdi, timings)) + goto found; + stdi.lcvs -= 2; + v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs); + if (stdi2dv_timings(sd, &stdi, timings)) { + /* + * The STDI block may measure wrong values, especially + * for lcvs and lcf. If the driver can not find any + * valid timing, the STDI block is restarted to measure + * the video timings again. The function will return an + * error, but the restart of STDI will generate a new + * STDI interrupt and the format detection process will + * restart. + */ + if (state->restart_stdi_once) { + v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__); + /* TODO restart STDI for Sync Channel 2 */ + /* enter one-shot mode */ + cp_write_and_or(sd, 0x86, 0xf9, 0x00); + /* trigger STDI restart */ + cp_write_and_or(sd, 0x86, 0xf9, 0x04); + /* reset to continuous mode */ + cp_write_and_or(sd, 0x86, 0xf9, 0x02); + state->restart_stdi_once = false; + return -ENOLINK; + } + v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__); + return -ERANGE; + } + state->restart_stdi_once = true; + } +found: + + if (no_signal(sd)) { + v4l2_dbg(1, debug, sd, "%s: signal lost during readout\n", __func__); + memset(timings, 0, sizeof(struct v4l2_dv_timings)); + return -ENOLINK; + } + + if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || + (DIGITAL_INPUT && bt->pixelclock > 225000000)) { + v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", + __func__, (u32)bt->pixelclock); + return -ERANGE; + } + + if (debug > 1) + adv7604_print_timings(sd, timings, + "adv7604_query_dv_timings:", true); + + return 0; +} + +static int adv7604_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + struct v4l2_bt_timings *bt; + int err; + + if (!timings) + return -EINVAL; + + bt = &timings->bt; + + if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || + (DIGITAL_INPUT && bt->pixelclock > 225000000)) { + v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", + __func__, (u32)bt->pixelclock); + return -ERANGE; + } + + adv7604_fill_optional_dv_timings_fields(sd, timings); + + state->timings = *timings; + + cp_write(sd, 0x91, bt->interlaced ? 0x50 : 0x10); + + /* Use prim_mode and vid_std when available */ + err = configure_predefined_video_timings(sd, timings); + if (err) { + /* custom settings when the video format + does not have prim_mode/vid_std */ + configure_custom_video_timings(sd, bt); + } + + set_rgb_quantization_range(sd); + + + if (debug > 1) + adv7604_print_timings(sd, timings, + "adv7604_s_dv_timings:", true); + return 0; +} + +static int adv7604_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + + *timings = state->timings; + return 0; +} + +static void enable_input(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: + /* enable */ + io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */ + break; + case ADV7604_MODE_HDMI: + /* enable */ + hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */ + hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */ + io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */ + break; + default: + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); + break; + } +} + +static void disable_input(struct v4l2_subdev *sd) +{ + /* disable */ + io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */ + hdmi_write(sd, 0x1a, 0x1a); /* Mute audio */ + hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */ +} + +static void select_input(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: + /* reset ADI recommended settings for HDMI: */ + /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ + hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */ + hdmi_write(sd, 0x3d, 0x00); /* DDC bus active pull-up control */ + hdmi_write(sd, 0x3e, 0x74); /* TMDS PLL optimization */ + hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ + hdmi_write(sd, 0x57, 0x74); /* TMDS PLL optimization */ + hdmi_write(sd, 0x58, 0x63); /* TMDS PLL optimization */ + hdmi_write(sd, 0x8d, 0x18); /* equaliser */ + hdmi_write(sd, 0x8e, 0x34); /* equaliser */ + hdmi_write(sd, 0x93, 0x88); /* equaliser */ + hdmi_write(sd, 0x94, 0x2e); /* equaliser */ + hdmi_write(sd, 0x96, 0x00); /* enable automatic EQ changing */ + + afe_write(sd, 0x00, 0x08); /* power up ADC */ + afe_write(sd, 0x01, 0x06); /* power up Analog Front End */ + afe_write(sd, 0xc8, 0x00); /* phase control */ + + /* set ADI recommended settings for digitizer */ + /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ + afe_write(sd, 0x12, 0x7b); /* ADC noise shaping filter controls */ + afe_write(sd, 0x0c, 0x1f); /* CP core gain controls */ + cp_write(sd, 0x3e, 0x04); /* CP core pre-gain control */ + cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ + cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */ + break; + + case ADV7604_MODE_HDMI: + /* set ADI recommended settings for HDMI: */ + /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ + hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */ + hdmi_write(sd, 0x3d, 0x10); /* DDC bus active pull-up control */ + hdmi_write(sd, 0x3e, 0x39); /* TMDS PLL optimization */ + hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ + hdmi_write(sd, 0x57, 0xb6); /* TMDS PLL optimization */ + hdmi_write(sd, 0x58, 0x03); /* TMDS PLL optimization */ + hdmi_write(sd, 0x8d, 0x18); /* equaliser */ + hdmi_write(sd, 0x8e, 0x34); /* equaliser */ + hdmi_write(sd, 0x93, 0x8b); /* equaliser */ + hdmi_write(sd, 0x94, 0x2d); /* equaliser */ + hdmi_write(sd, 0x96, 0x01); /* enable automatic EQ changing */ + + afe_write(sd, 0x00, 0xff); /* power down ADC */ + afe_write(sd, 0x01, 0xfe); /* power down Analog Front End */ + afe_write(sd, 0xc8, 0x40); /* phase control */ + + /* reset ADI recommended settings for digitizer */ + /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ + afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */ + afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */ + cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */ + cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ + cp_write(sd, 0x40, 0x80); /* CP core pre-gain control. Graphics mode */ + + break; + default: + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); + break; + } +} + +static int adv7604_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7604_state *state = to_state(sd); + + v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input); + + state->mode = input; + + disable_input(sd); + + select_input(sd); + + enable_input(sd); + + return 0; +} + +static int adv7604_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + /* Good enough for now */ + *code = V4L2_MBUS_FMT_FIXED; + return 0; +} + +static int adv7604_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7604_state *state = to_state(sd); + + fmt->width = state->timings.bt.width; + fmt->height = state->timings.bt.height; + fmt->code = V4L2_MBUS_FMT_FIXED; + fmt->field = V4L2_FIELD_NONE; + if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + fmt->colorspace = (state->timings.bt.height <= 576) ? + V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709; + } + return 0; +} + +static int adv7604_isr(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + struct adv7604_state *state = to_state(sd); + u8 fmt_change, fmt_change_digital, tx_5v; + + /* format change */ + fmt_change = io_read(sd, 0x43) & 0x98; + if (fmt_change) + io_write(sd, 0x44, fmt_change); + fmt_change_digital = DIGITAL_INPUT ? (io_read(sd, 0x6b) & 0xc0) : 0; + if (fmt_change_digital) + io_write(sd, 0x6c, fmt_change_digital); + if (fmt_change || fmt_change_digital) { + v4l2_dbg(1, debug, sd, + "%s: ADV7604_FMT_CHANGE, fmt_change = 0x%x, fmt_change_digital = 0x%x\n", + __func__, fmt_change, fmt_change_digital); + v4l2_subdev_notify(sd, ADV7604_FMT_CHANGE, NULL); + if (handled) + *handled = true; + } + /* tx 5v detect */ + tx_5v = io_read(sd, 0x70) & 0x10; + if (tx_5v) { + v4l2_dbg(1, debug, sd, "%s: tx_5v: 0x%x\n", __func__, tx_5v); + io_write(sd, 0x71, tx_5v); + adv7604_s_detect_tx_5v_ctrl(sd); + if (handled) + *handled = true; + } + return 0; +} + +static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) +{ + struct adv7604_state *state = to_state(sd); + + if (edid->pad != 0) + return -EINVAL; + if (edid->blocks == 0) + return -EINVAL; + if (edid->start_block >= state->edid_blocks) + return -EINVAL; + if (edid->start_block + edid->blocks > state->edid_blocks) + edid->blocks = state->edid_blocks - edid->start_block; + if (!edid->edid) + return -EINVAL; + memcpy(edid->edid + edid->start_block * 128, + state->edid + edid->start_block * 128, + edid->blocks * 128); + return 0; +} + +static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) +{ + struct adv7604_state *state = to_state(sd); + int err; + + if (edid->pad != 0) + return -EINVAL; + if (edid->start_block != 0) + return -EINVAL; + if (edid->blocks == 0) { + /* Pull down the hotplug pin */ + v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); + /* Disables I2C access to internal EDID ram from DDC port */ + rep_write_and_or(sd, 0x77, 0xf0, 0x0); + state->edid_blocks = 0; + /* Fall back to a 16:9 aspect ratio */ + state->aspect_ratio.numerator = 16; + state->aspect_ratio.denominator = 9; + return 0; + } + if (edid->blocks > 2) + return -E2BIG; + if (!edid->edid) + return -EINVAL; + memcpy(state->edid, edid->edid, 128 * edid->blocks); + state->edid_blocks = edid->blocks; + state->aspect_ratio = v4l2_calc_aspect_ratio(edid->edid[0x15], + edid->edid[0x16]); + err = edid_write_block(sd, 128 * edid->blocks, state->edid); + if (err < 0) + v4l2_err(sd, "error %d writing edid\n", err); + return err; +} + +/*********** avi info frame CEA-861-E **************/ + +static void print_avi_infoframe(struct v4l2_subdev *sd) +{ + int i; + u8 buf[14]; + u8 avi_len; + u8 avi_ver; + + if (!(hdmi_read(sd, 0x05) & 0x80)) { + v4l2_info(sd, "receive DVI-D signal (AVI infoframe not supported)\n"); + return; + } + if (!(io_read(sd, 0x60) & 0x01)) { + v4l2_info(sd, "AVI infoframe not received\n"); + return; + } + + if (io_read(sd, 0x83) & 0x01) { + v4l2_info(sd, "AVI infoframe checksum error has occurred earlier\n"); + io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ + if (io_read(sd, 0x83) & 0x01) { + v4l2_info(sd, "AVI infoframe checksum error still present\n"); + io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ + } + } + + avi_len = infoframe_read(sd, 0xe2); + avi_ver = infoframe_read(sd, 0xe1); + v4l2_info(sd, "AVI infoframe version %d (%d byte)\n", + avi_ver, avi_len); + + if (avi_ver != 0x02) + return; + + for (i = 0; i < 14; i++) + buf[i] = infoframe_read(sd, i); + + v4l2_info(sd, + "\t%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[10], buf[11], buf[12], buf[13]); +} + +static int adv7604_log_status(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + struct v4l2_dv_timings timings; + struct stdi_readback stdi; + u8 reg_io_0x02 = io_read(sd, 0x02); + + char *csc_coeff_sel_rb[16] = { + "bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB", + "reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709", + "reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709", + "reserved", "reserved", "reserved", "reserved", "manual" + }; + char *input_color_space_txt[16] = { + "RGB limited range (16-235)", "RGB full range (0-255)", + "YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)", + "XvYCC Bt.601", "XvYCC Bt.709", + "YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)", + "invalid", "invalid", "invalid", "invalid", "invalid", + "invalid", "invalid", "automatic" + }; + char *rgb_quantization_range_txt[] = { + "Automatic", + "RGB limited range (16-235)", + "RGB full range (0-255)", + }; + + v4l2_info(sd, "-----Chip status-----\n"); + v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on"); + v4l2_info(sd, "Connector type: %s\n", state->connector_hdmi ? + "HDMI" : (DIGITAL_INPUT ? "DVI-D" : "DVI-A")); + v4l2_info(sd, "EDID: %s\n", ((rep_read(sd, 0x7d) & 0x01) && + (rep_read(sd, 0x77) & 0x01)) ? "enabled" : "disabled "); + v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ? + "enabled" : "disabled"); + + v4l2_info(sd, "-----Signal status-----\n"); + v4l2_info(sd, "Cable detected (+5V power): %s\n", + (io_read(sd, 0x6f) & 0x10) ? "true" : "false"); + v4l2_info(sd, "TMDS signal detected: %s\n", + no_signal_tmds(sd) ? "false" : "true"); + v4l2_info(sd, "TMDS signal locked: %s\n", + no_lock_tmds(sd) ? "false" : "true"); + v4l2_info(sd, "SSPD locked: %s\n", no_lock_sspd(sd) ? "false" : "true"); + v4l2_info(sd, "STDI locked: %s\n", no_lock_stdi(sd) ? "false" : "true"); + v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true"); + v4l2_info(sd, "CP free run: %s\n", + (!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off")); + v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n", + io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f, + (io_read(sd, 0x01) & 0x70) >> 4); + + v4l2_info(sd, "-----Video Timings-----\n"); + if (read_stdi(sd, &stdi)) + v4l2_info(sd, "STDI: not locked\n"); + else + v4l2_info(sd, "STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %s, %chsync, %cvsync\n", + stdi.lcf, stdi.bl, stdi.lcvs, + stdi.interlaced ? "interlaced" : "progressive", + stdi.hs_pol, stdi.vs_pol); + if (adv7604_query_dv_timings(sd, &timings)) + v4l2_info(sd, "No video detected\n"); + else + adv7604_print_timings(sd, &timings, "Detected format:", true); + adv7604_print_timings(sd, &state->timings, "Configured format:", true); + + v4l2_info(sd, "-----Color space-----\n"); + v4l2_info(sd, "RGB quantization range ctrl: %s\n", + rgb_quantization_range_txt[state->rgb_quantization_range]); + v4l2_info(sd, "Input color space: %s\n", + input_color_space_txt[reg_io_0x02 >> 4]); + v4l2_info(sd, "Output color space: %s %s, saturator %s\n", + (reg_io_0x02 & 0x02) ? "RGB" : "YCbCr", + (reg_io_0x02 & 0x04) ? "(16-235)" : "(0-255)", + ((reg_io_0x02 & 0x04) ^ (reg_io_0x02 & 0x01)) ? + "enabled" : "disabled"); + v4l2_info(sd, "Color space conversion: %s\n", + csc_coeff_sel_rb[cp_read(sd, 0xfc) >> 4]); + + /* Digital video */ + if (DIGITAL_INPUT) { + v4l2_info(sd, "-----HDMI status-----\n"); + v4l2_info(sd, "HDCP encrypted content: %s\n", + hdmi_read(sd, 0x05) & 0x40 ? "true" : "false"); + + print_avi_infoframe(sd); + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops adv7604_ctrl_ops = { + .s_ctrl = adv7604_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7604_core_ops = { + .log_status = adv7604_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .g_chip_ident = adv7604_g_chip_ident, + .interrupt_service_routine = adv7604_isr, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = adv7604_g_register, + .s_register = adv7604_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops adv7604_video_ops = { + .s_routing = adv7604_s_routing, + .g_input_status = adv7604_g_input_status, + .s_dv_timings = adv7604_s_dv_timings, + .g_dv_timings = adv7604_g_dv_timings, + .query_dv_timings = adv7604_query_dv_timings, + .enum_dv_timings = adv7604_enum_dv_timings, + .dv_timings_cap = adv7604_dv_timings_cap, + .enum_mbus_fmt = adv7604_enum_mbus_fmt, + .g_mbus_fmt = adv7604_g_mbus_fmt, + .try_mbus_fmt = adv7604_g_mbus_fmt, + .s_mbus_fmt = adv7604_g_mbus_fmt, +}; + +static const struct v4l2_subdev_pad_ops adv7604_pad_ops = { + .get_edid = adv7604_get_edid, + .set_edid = adv7604_set_edid, +}; + +static const struct v4l2_subdev_ops adv7604_ops = { + .core = &adv7604_core_ops, + .video = &adv7604_video_ops, + .pad = &adv7604_pad_ops, +}; + +/* -------------------------- custom ctrls ---------------------------------- */ + +static const struct v4l2_ctrl_config adv7604_ctrl_analog_sampling_phase = { + .ops = &adv7604_ctrl_ops, + .id = V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE, + .name = "Analog Sampling Phase", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 0x1f, + .step = 1, + .def = 0, +}; + +static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color_manual = { + .ops = &adv7604_ctrl_ops, + .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL, + .name = "Free Running Color, Manual", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = false, + .max = true, + .step = 1, + .def = false, +}; + +static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color = { + .ops = &adv7604_ctrl_ops, + .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR, + .name = "Free Running Color", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0x0, + .max = 0xffffff, + .step = 0x1, + .def = 0x0, +}; + +/* ----------------------------------------------------------------------- */ + +static int adv7604_core_init(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + struct adv7604_platform_data *pdata = &state->pdata; + + hdmi_write(sd, 0x48, + (pdata->disable_pwrdnb ? 0x80 : 0) | + (pdata->disable_cable_det_rst ? 0x40 : 0)); + + disable_input(sd); + + /* power */ + io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */ + io_write(sd, 0x0b, 0x44); /* Power down ESDP block */ + cp_write(sd, 0xcf, 0x01); /* Power down macrovision */ + + /* video format */ + io_write_and_or(sd, 0x02, 0xf0, + pdata->alt_gamma << 3 | + pdata->op_656_range << 2 | + pdata->rgb_out << 1 | + pdata->alt_data_sat << 0); + io_write(sd, 0x03, pdata->op_format_sel); + io_write_and_or(sd, 0x04, 0x1f, pdata->op_ch_sel << 5); + io_write_and_or(sd, 0x05, 0xf0, pdata->blank_data << 3 | + pdata->insert_av_codes << 2 | + pdata->replicate_av_codes << 1 | + pdata->invert_cbcr << 0); + + /* TODO from platform data */ + cp_write(sd, 0x69, 0x30); /* Enable CP CSC */ + io_write(sd, 0x06, 0xa6); /* positive VS and HS */ + io_write(sd, 0x14, 0x7f); /* Drive strength adjusted to max */ + cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */ + cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */ + cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold - + ADI recommended setting [REF_01, c. 2.3.3] */ + cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold - + ADI recommended setting [REF_01, c. 2.3.3] */ + cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution + for digital formats */ + + /* TODO from platform data */ + afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */ + + afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */ + io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4); + + /* interrupts */ + io_write(sd, 0x40, 0xc2); /* Configure INT1 */ + io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */ + io_write(sd, 0x46, 0x98); /* Enable SSPD, STDI and CP unlocked interrupts */ + io_write(sd, 0x6e, 0xc0); /* Enable V_LOCKED and DE_REGEN_LCK interrupts */ + io_write(sd, 0x73, 0x10); /* Enable CABLE_DET_A_ST (+5v) interrupt */ + + return v4l2_ctrl_handler_setup(sd->ctrl_handler); +} + +static void adv7604_unregister_clients(struct adv7604_state *state) +{ + if (state->i2c_avlink) + i2c_unregister_device(state->i2c_avlink); + if (state->i2c_cec) + i2c_unregister_device(state->i2c_cec); + if (state->i2c_infoframe) + i2c_unregister_device(state->i2c_infoframe); + if (state->i2c_esdp) + i2c_unregister_device(state->i2c_esdp); + if (state->i2c_dpp) + i2c_unregister_device(state->i2c_dpp); + if (state->i2c_afe) + i2c_unregister_device(state->i2c_afe); + if (state->i2c_repeater) + i2c_unregister_device(state->i2c_repeater); + if (state->i2c_edid) + i2c_unregister_device(state->i2c_edid); + if (state->i2c_hdmi) + i2c_unregister_device(state->i2c_hdmi); + if (state->i2c_test) + i2c_unregister_device(state->i2c_test); + if (state->i2c_cp) + i2c_unregister_device(state->i2c_cp); + if (state->i2c_vdp) + i2c_unregister_device(state->i2c_vdp); +} + +static struct i2c_client *adv7604_dummy_client(struct v4l2_subdev *sd, + u8 addr, u8 io_reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (addr) + io_write(sd, io_reg, addr << 1); + return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1); +} + +static int adv7604_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7604_state *state; + struct adv7604_platform_data *pdata = client->dev.platform_data; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + int err; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + v4l_dbg(1, debug, client, "detecting adv7604 client on address 0x%x\n", + client->addr << 1); + + state = kzalloc(sizeof(struct adv7604_state), GFP_KERNEL); + if (!state) { + v4l_err(client, "Could not allocate adv7604_state memory!\n"); + return -ENOMEM; + } + + /* platform data */ + if (!pdata) { + v4l_err(client, "No platform data!\n"); + err = -ENODEV; + goto err_state; + } + memcpy(&state->pdata, pdata, sizeof(state->pdata)); + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &adv7604_ops); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + state->connector_hdmi = pdata->connector_hdmi; + + /* i2c access to adv7604? */ + if (adv_smbus_read_byte_data_check(client, 0xfb, false) != 0x68) { + v4l2_info(sd, "not an adv7604 on address 0x%x\n", + client->addr << 1); + err = -ENODEV; + goto err_state; + } + + /* control handlers */ + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 9); + + v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, + V4L2_CID_HUE, 0, 128, 1, 0); + + /* private controls */ + state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0); + state->detect_tx_5v_ctrl->is_private = true; + state->rgb_quantization_range_ctrl = + v4l2_ctrl_new_std_menu(hdl, &adv7604_ctrl_ops, + V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, + 0, V4L2_DV_RGB_RANGE_AUTO); + state->rgb_quantization_range_ctrl->is_private = true; + + /* custom controls */ + state->analog_sampling_phase_ctrl = + v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_analog_sampling_phase, NULL); + state->analog_sampling_phase_ctrl->is_private = true; + state->free_run_color_manual_ctrl = + v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color_manual, NULL); + state->free_run_color_manual_ctrl->is_private = true; + state->free_run_color_ctrl = + v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color, NULL); + state->free_run_color_ctrl->is_private = true; + + sd->ctrl_handler = hdl; + if (hdl->error) { + err = hdl->error; + goto err_hdl; + } + if (adv7604_s_detect_tx_5v_ctrl(sd)) { + err = -ENODEV; + goto err_hdl; + } + + state->i2c_avlink = adv7604_dummy_client(sd, pdata->i2c_avlink, 0xf3); + state->i2c_cec = adv7604_dummy_client(sd, pdata->i2c_cec, 0xf4); + state->i2c_infoframe = adv7604_dummy_client(sd, pdata->i2c_infoframe, 0xf5); + state->i2c_esdp = adv7604_dummy_client(sd, pdata->i2c_esdp, 0xf6); + state->i2c_dpp = adv7604_dummy_client(sd, pdata->i2c_dpp, 0xf7); + state->i2c_afe = adv7604_dummy_client(sd, pdata->i2c_afe, 0xf8); + state->i2c_repeater = adv7604_dummy_client(sd, pdata->i2c_repeater, 0xf9); + state->i2c_edid = adv7604_dummy_client(sd, pdata->i2c_edid, 0xfa); + state->i2c_hdmi = adv7604_dummy_client(sd, pdata->i2c_hdmi, 0xfb); + state->i2c_test = adv7604_dummy_client(sd, pdata->i2c_test, 0xfc); + state->i2c_cp = adv7604_dummy_client(sd, pdata->i2c_cp, 0xfd); + state->i2c_vdp = adv7604_dummy_client(sd, pdata->i2c_vdp, 0xfe); + if (!state->i2c_avlink || !state->i2c_cec || !state->i2c_infoframe || + !state->i2c_esdp || !state->i2c_dpp || !state->i2c_afe || + !state->i2c_repeater || !state->i2c_edid || !state->i2c_hdmi || + !state->i2c_test || !state->i2c_cp || !state->i2c_vdp) { + err = -ENOMEM; + v4l2_err(sd, "failed to create all i2c clients\n"); + goto err_i2c; + } + state->restart_stdi_once = true; + + /* work queues */ + state->work_queues = create_singlethread_workqueue(client->name); + if (!state->work_queues) { + v4l2_err(sd, "Could not create work queue\n"); + err = -ENOMEM; + goto err_i2c; + } + + INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug, + adv7604_delayed_work_enable_hotplug); + + state->pad.flags = MEDIA_PAD_FL_SOURCE; + err = media_entity_init(&sd->entity, 1, &state->pad, 0); + if (err) + goto err_work_queues; + + err = adv7604_core_init(sd); + if (err) + goto err_entity; + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + return 0; + +err_entity: + media_entity_cleanup(&sd->entity); +err_work_queues: + cancel_delayed_work(&state->delayed_work_enable_hotplug); + destroy_workqueue(state->work_queues); +err_i2c: + adv7604_unregister_clients(state); +err_hdl: + v4l2_ctrl_handler_free(hdl); +err_state: + kfree(state); + return err; +} + +/* ----------------------------------------------------------------------- */ + +static int adv7604_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7604_state *state = to_state(sd); + + cancel_delayed_work(&state->delayed_work_enable_hotplug); + destroy_workqueue(state->work_queues); + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + adv7604_unregister_clients(to_state(sd)); + v4l2_ctrl_handler_free(sd->ctrl_handler); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_device_id adv7604_id[] = { + { "adv7604", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7604_id); + +static struct i2c_driver adv7604_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7604", + }, + .probe = adv7604_probe, + .remove = adv7604_remove, + .id_table = adv7604_id, +}; + +module_i2c_driver(adv7604_driver); diff --git a/drivers/media/i2c/ak881x.c b/drivers/media/i2c/ak881x.c new file mode 100644 index 00000000..fd47465e --- /dev/null +++ b/drivers/media/i2c/ak881x.c @@ -0,0 +1,359 @@ +/* + * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM) + * + * Copyright (C) 2010, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define AK881X_INTERFACE_MODE 0 +#define AK881X_VIDEO_PROCESS1 1 +#define AK881X_VIDEO_PROCESS2 2 +#define AK881X_VIDEO_PROCESS3 3 +#define AK881X_DAC_MODE 5 +#define AK881X_STATUS 0x24 +#define AK881X_DEVICE_ID 0x25 +#define AK881X_DEVICE_REVISION 0x26 + +struct ak881x { + struct v4l2_subdev subdev; + struct ak881x_pdata *pdata; + unsigned int lines; + int id; /* DEVICE_ID code V4L2_IDENT_AK881X code from v4l2-chip-ident.h */ + char revision; /* DEVICE_REVISION content */ +}; + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u8 data) +{ + return i2c_smbus_write_byte_data(client, reg, data); +} + +static int reg_set(struct i2c_client *client, const u8 reg, + const u8 data, u8 mask) +{ + int ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, (ret & ~mask) | (data & mask)); +} + +static struct ak881x *to_ak881x(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct ak881x, subdev); +} + +static int ak881x_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = ak881x->id; + id->revision = ak881x->revision; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ak881x_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int ak881x_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + + v4l_bound_align_image(&mf->width, 0, 720, 2, + &mf->height, 0, ak881x->lines, 1, 0); + mf->field = V4L2_FIELD_INTERLACED; + mf->code = V4L2_MBUS_FMT_YUYV8_2X8; + mf->colorspace = V4L2_COLORSPACE_SMPTE170M; + + return 0; +} + +static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + if (mf->field != V4L2_FIELD_INTERLACED || + mf->code != V4L2_MBUS_FMT_YUYV8_2X8) + return -EINVAL; + + return ak881x_try_g_mbus_fmt(sd, mf); +} + +static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_YUYV8_2X8; + return 0; +} + +static int ak881x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = 720; + a->bounds.height = ak881x->lines; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + u8 vp1; + + if (std == V4L2_STD_NTSC_443) { + vp1 = 3; + ak881x->lines = 480; + } else if (std == V4L2_STD_PAL_M) { + vp1 = 5; + ak881x->lines = 480; + } else if (std == V4L2_STD_PAL_60) { + vp1 = 7; + ak881x->lines = 480; + } else if (std && !(std & ~V4L2_STD_PAL)) { + vp1 = 0xf; + ak881x->lines = 576; + } else if (std && !(std & ~V4L2_STD_NTSC)) { + vp1 = 0; + ak881x->lines = 480; + } else { + /* No SECAM or PAL_N/Nc supported */ + return -EINVAL; + } + + reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf); + + return 0; +} + +static int ak881x_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + + if (enable) { + u8 dac; + /* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */ + /* Default: composite output */ + if (ak881x->pdata->flags & AK881X_COMPONENT) + dac = 3; + else + dac = 4; + /* Turn on the DAC(s) */ + reg_write(client, AK881X_DAC_MODE, dac); + dev_dbg(&client->dev, "chip status 0x%x\n", + reg_read(client, AK881X_STATUS)); + } else { + /* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */ + reg_write(client, AK881X_DAC_MODE, 0); + dev_dbg(&client->dev, "chip status 0x%x\n", + reg_read(client, AK881X_STATUS)); + } + + return 0; +} + +static struct v4l2_subdev_core_ops ak881x_subdev_core_ops = { + .g_chip_ident = ak881x_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ak881x_g_register, + .s_register = ak881x_s_register, +#endif +}; + +static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = { + .s_mbus_fmt = ak881x_s_mbus_fmt, + .g_mbus_fmt = ak881x_try_g_mbus_fmt, + .try_mbus_fmt = ak881x_try_g_mbus_fmt, + .cropcap = ak881x_cropcap, + .enum_mbus_fmt = ak881x_enum_mbus_fmt, + .s_std_output = ak881x_s_std_output, + .s_stream = ak881x_s_stream, +}; + +static struct v4l2_subdev_ops ak881x_subdev_ops = { + .core = &ak881x_subdev_core_ops, + .video = &ak881x_subdev_video_ops, +}; + +static int ak881x_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct ak881x *ak881x; + u8 ifmode, data; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + ak881x = kzalloc(sizeof(struct ak881x), GFP_KERNEL); + if (!ak881x) + return -ENOMEM; + + v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops); + + data = reg_read(client, AK881X_DEVICE_ID); + + switch (data) { + case 0x13: + ak881x->id = V4L2_IDENT_AK8813; + break; + case 0x14: + ak881x->id = V4L2_IDENT_AK8814; + break; + default: + dev_err(&client->dev, + "No ak881x chip detected, register read %x\n", data); + kfree(ak881x); + return -ENODEV; + } + + ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION); + ak881x->pdata = client->dev.platform_data; + + if (ak881x->pdata) { + if (ak881x->pdata->flags & AK881X_FIELD) + ifmode = 4; + else + ifmode = 0; + + switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) { + case AK881X_IF_MODE_BT656: + ifmode |= 1; + break; + case AK881X_IF_MODE_MASTER: + ifmode |= 2; + break; + case AK881X_IF_MODE_SLAVE: + default: + break; + } + + dev_dbg(&client->dev, "IF mode %x\n", ifmode); + + /* + * "Line Blanking No." seems to be the same as the number of + * "black" lines on, e.g., SuperH VOU, whose default value of 20 + * "incidentally" matches ak881x' default + */ + reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3)); + } + + /* Hardware default: NTSC-M */ + ak881x->lines = 480; + + dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n", + data, ak881x->revision); + + return 0; +} + +static int ak881x_remove(struct i2c_client *client) +{ + struct ak881x *ak881x = to_ak881x(client); + + v4l2_device_unregister_subdev(&ak881x->subdev); + kfree(ak881x); + + return 0; +} + +static const struct i2c_device_id ak881x_id[] = { + { "ak8813", 0 }, + { "ak8814", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ak881x_id); + +static struct i2c_driver ak881x_i2c_driver = { + .driver = { + .name = "ak881x", + }, + .probe = ak881x_probe, + .remove = ak881x_remove, + .id_table = ak881x_id, +}; + +module_i2c_driver(ak881x_i2c_driver); + +MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/aptina-pll.c b/drivers/media/i2c/aptina-pll.c new file mode 100644 index 00000000..8153a449 --- /dev/null +++ b/drivers/media/i2c/aptina-pll.c @@ -0,0 +1,173 @@ +/* + * Aptina Sensor PLL Configuration + * + * Copyright (C) 2012 Laurent Pinchart + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +#include "aptina-pll.h" + +int aptina_pll_calculate(struct device *dev, + const struct aptina_pll_limits *limits, + struct aptina_pll *pll) +{ + unsigned int mf_min; + unsigned int mf_max; + unsigned int p1_min; + unsigned int p1_max; + unsigned int p1; + unsigned int div; + + dev_dbg(dev, "PLL: ext clock %u pix clock %u\n", + pll->ext_clock, pll->pix_clock); + + if (pll->ext_clock < limits->ext_clock_min || + pll->ext_clock > limits->ext_clock_max) { + dev_err(dev, "pll: invalid external clock frequency.\n"); + return -EINVAL; + } + + if (pll->pix_clock == 0 || pll->pix_clock > limits->pix_clock_max) { + dev_err(dev, "pll: invalid pixel clock frequency.\n"); + return -EINVAL; + } + + /* Compute the multiplier M and combined N*P1 divisor. */ + div = gcd(pll->pix_clock, pll->ext_clock); + pll->m = pll->pix_clock / div; + div = pll->ext_clock / div; + + /* We now have the smallest M and N*P1 values that will result in the + * desired pixel clock frequency, but they might be out of the valid + * range. Compute the factor by which we should multiply them given the + * following constraints: + * + * - minimum/maximum multiplier + * - minimum/maximum multiplier output clock frequency assuming the + * minimum/maximum N value + * - minimum/maximum combined N*P1 divisor + */ + mf_min = DIV_ROUND_UP(limits->m_min, pll->m); + mf_min = max(mf_min, limits->out_clock_min / + (pll->ext_clock / limits->n_min * pll->m)); + mf_min = max(mf_min, limits->n_min * limits->p1_min / div); + mf_max = limits->m_max / pll->m; + mf_max = min(mf_max, limits->out_clock_max / + (pll->ext_clock / limits->n_max * pll->m)); + mf_max = min(mf_max, DIV_ROUND_UP(limits->n_max * limits->p1_max, div)); + + dev_dbg(dev, "pll: mf min %u max %u\n", mf_min, mf_max); + if (mf_min > mf_max) { + dev_err(dev, "pll: no valid combined N*P1 divisor.\n"); + return -EINVAL; + } + + /* + * We're looking for the highest acceptable P1 value for which a + * multiplier factor MF exists that fulfills the following conditions: + * + * 1. p1 is in the [p1_min, p1_max] range given by the limits and is + * even + * 2. mf is in the [mf_min, mf_max] range computed above + * 3. div * mf is a multiple of p1, in order to compute + * n = div * mf / p1 + * m = pll->m * mf + * 4. the internal clock frequency, given by ext_clock / n, is in the + * [int_clock_min, int_clock_max] range given by the limits + * 5. the output clock frequency, given by ext_clock / n * m, is in the + * [out_clock_min, out_clock_max] range given by the limits + * + * The first naive approach is to iterate over all p1 values acceptable + * according to (1) and all mf values acceptable according to (2), and + * stop at the first combination that fulfills (3), (4) and (5). This + * has a O(n^2) complexity. + * + * Instead of iterating over all mf values in the [mf_min, mf_max] range + * we can compute the mf increment between two acceptable values + * according to (3) with + * + * mf_inc = p1 / gcd(div, p1) (6) + * + * and round the minimum up to the nearest multiple of mf_inc. This will + * restrict the number of mf values to be checked. + * + * Furthermore, conditions (4) and (5) only restrict the range of + * acceptable p1 and mf values by modifying the minimum and maximum + * limits. (5) can be expressed as + * + * ext_clock / (div * mf / p1) * m * mf >= out_clock_min + * ext_clock / (div * mf / p1) * m * mf <= out_clock_max + * + * or + * + * p1 >= out_clock_min * div / (ext_clock * m) (7) + * p1 <= out_clock_max * div / (ext_clock * m) + * + * Similarly, (4) can be expressed as + * + * mf >= ext_clock * p1 / (int_clock_max * div) (8) + * mf <= ext_clock * p1 / (int_clock_min * div) + * + * We can thus iterate over the restricted p1 range defined by the + * combination of (1) and (7), and then compute the restricted mf range + * defined by the combination of (2), (6) and (8). If the resulting mf + * range is not empty, any value in the mf range is acceptable. We thus + * select the mf lwoer bound and the corresponding p1 value. + */ + if (limits->p1_min == 0) { + dev_err(dev, "pll: P1 minimum value must be >0.\n"); + return -EINVAL; + } + + p1_min = max(limits->p1_min, DIV_ROUND_UP(limits->out_clock_min * div, + pll->ext_clock * pll->m)); + p1_max = min(limits->p1_max, limits->out_clock_max * div / + (pll->ext_clock * pll->m)); + + for (p1 = p1_max & ~1; p1 >= p1_min; p1 -= 2) { + unsigned int mf_inc = p1 / gcd(div, p1); + unsigned int mf_high; + unsigned int mf_low; + + mf_low = roundup(max(mf_min, DIV_ROUND_UP(pll->ext_clock * p1, + limits->int_clock_max * div)), mf_inc); + mf_high = min(mf_max, pll->ext_clock * p1 / + (limits->int_clock_min * div)); + + if (mf_low > mf_high) + continue; + + pll->n = div * mf_low / p1; + pll->m *= mf_low; + pll->p1 = p1; + dev_dbg(dev, "PLL: N %u M %u P1 %u\n", pll->n, pll->m, pll->p1); + return 0; + } + + dev_err(dev, "pll: no valid N and P1 divisors found.\n"); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(aptina_pll_calculate); + +MODULE_DESCRIPTION("Aptina PLL Helpers"); +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/aptina-pll.h b/drivers/media/i2c/aptina-pll.h new file mode 100644 index 00000000..b370e341 --- /dev/null +++ b/drivers/media/i2c/aptina-pll.h @@ -0,0 +1,56 @@ +/* + * Aptina Sensor PLL Configuration + * + * Copyright (C) 2012 Laurent Pinchart + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __APTINA_PLL_H +#define __APTINA_PLL_H + +struct aptina_pll { + unsigned int ext_clock; + unsigned int pix_clock; + + unsigned int n; + unsigned int m; + unsigned int p1; +}; + +struct aptina_pll_limits { + unsigned int ext_clock_min; + unsigned int ext_clock_max; + unsigned int int_clock_min; + unsigned int int_clock_max; + unsigned int out_clock_min; + unsigned int out_clock_max; + unsigned int pix_clock_max; + + unsigned int n_min; + unsigned int n_max; + unsigned int m_min; + unsigned int m_max; + unsigned int p1_min; + unsigned int p1_max; +}; + +struct device; + +int aptina_pll_calculate(struct device *dev, + const struct aptina_pll_limits *limits, + struct aptina_pll *pll); + +#endif /* __APTINA_PLL_H */ diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c new file mode 100644 index 00000000..58d523f2 --- /dev/null +++ b/drivers/media/i2c/as3645a.c @@ -0,0 +1,888 @@ +/* + * drivers/media/i2c/as3645a.c - AS3645A and LM3555 flash controllers driver + * + * Copyright (C) 2008-2011 Nokia Corporation + * Copyright (c) 2011, Intel Corporation. + * + * Contact: Laurent Pinchart + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * TODO: + * - Check hardware FSTROBE control when sensor driver add support for this + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#define AS_TIMER_MS_TO_CODE(t) (((t) - 100) / 50) +#define AS_TIMER_CODE_TO_MS(c) (50 * (c) + 100) + +/* Register definitions */ + +/* Read-only Design info register: Reset state: xxxx 0001 */ +#define AS_DESIGN_INFO_REG 0x00 +#define AS_DESIGN_INFO_FACTORY(x) (((x) >> 4)) +#define AS_DESIGN_INFO_MODEL(x) ((x) & 0x0f) + +/* Read-only Version control register: Reset state: 0000 0000 + * for first engineering samples + */ +#define AS_VERSION_CONTROL_REG 0x01 +#define AS_VERSION_CONTROL_RFU(x) (((x) >> 4)) +#define AS_VERSION_CONTROL_VERSION(x) ((x) & 0x0f) + +/* Read / Write (Indicator and timer register): Reset state: 0000 1111 */ +#define AS_INDICATOR_AND_TIMER_REG 0x02 +#define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT 0 +#define AS_INDICATOR_AND_TIMER_VREF_SHIFT 4 +#define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT 6 + +/* Read / Write (Current set register): Reset state: 0110 1001 */ +#define AS_CURRENT_SET_REG 0x03 +#define AS_CURRENT_ASSIST_LIGHT_SHIFT 0 +#define AS_CURRENT_LED_DET_ON (1 << 3) +#define AS_CURRENT_FLASH_CURRENT_SHIFT 4 + +/* Read / Write (Control register): Reset state: 1011 0100 */ +#define AS_CONTROL_REG 0x04 +#define AS_CONTROL_MODE_SETTING_SHIFT 0 +#define AS_CONTROL_STROBE_ON (1 << 2) +#define AS_CONTROL_OUT_ON (1 << 3) +#define AS_CONTROL_EXT_TORCH_ON (1 << 4) +#define AS_CONTROL_STROBE_TYPE_EDGE (0 << 5) +#define AS_CONTROL_STROBE_TYPE_LEVEL (1 << 5) +#define AS_CONTROL_COIL_PEAK_SHIFT 6 + +/* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000 */ +#define AS_FAULT_INFO_REG 0x05 +#define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT (1 << 1) +#define AS_FAULT_INFO_INDICATOR_LED (1 << 2) +#define AS_FAULT_INFO_LED_AMOUNT (1 << 3) +#define AS_FAULT_INFO_TIMEOUT (1 << 4) +#define AS_FAULT_INFO_OVER_TEMPERATURE (1 << 5) +#define AS_FAULT_INFO_SHORT_CIRCUIT (1 << 6) +#define AS_FAULT_INFO_OVER_VOLTAGE (1 << 7) + +/* Boost register */ +#define AS_BOOST_REG 0x0d +#define AS_BOOST_CURRENT_DISABLE (0 << 0) +#define AS_BOOST_CURRENT_ENABLE (1 << 0) + +/* Password register is used to unlock boost register writing */ +#define AS_PASSWORD_REG 0x0f +#define AS_PASSWORD_UNLOCK_VALUE 0x55 + +enum as_mode { + AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT, +}; + +/* + * struct as3645a + * + * @subdev: V4L2 subdev + * @pdata: Flash platform data + * @power_lock: Protects power_count + * @power_count: Power reference count + * @led_mode: V4L2 flash LED mode + * @timeout: Flash timeout in microseconds + * @flash_current: Flash current (0=200mA ... 15=500mA). Maximum + * values are 400mA for two LEDs and 500mA for one LED. + * @assist_current: Torch/Assist light current (0=20mA, 1=40mA ... 7=160mA) + * @indicator_current: Indicator LED current (0=0mA, 1=2.5mA ... 4=10mA) + * @strobe_source: Flash strobe source (software or external) + */ +struct as3645a { + struct v4l2_subdev subdev; + const struct as3645a_platform_data *pdata; + + struct mutex power_lock; + int power_count; + + /* Controls */ + struct v4l2_ctrl_handler ctrls; + + enum v4l2_flash_led_mode led_mode; + unsigned int timeout; + u8 flash_current; + u8 assist_current; + u8 indicator_current; + enum v4l2_flash_strobe_source strobe_source; +}; + +#define to_as3645a(sd) container_of(sd, struct as3645a, subdev) + +/* Return negative errno else zero on success */ +static int as3645a_write(struct as3645a *flash, u8 addr, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + rval = i2c_smbus_write_byte_data(client, addr, val); + + dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val, + rval < 0 ? "fail" : "ok"); + + return rval; +} + +/* Return negative errno else a data byte received from the device. */ +static int as3645a_read(struct as3645a *flash, u8 addr) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + rval = i2c_smbus_read_byte_data(client, addr); + + dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval, + rval < 0 ? "fail" : "ok"); + + return rval; +} + +/* ----------------------------------------------------------------------------- + * Hardware configuration and trigger + */ + +/* + * as3645a_set_config - Set flash configuration registers + * @flash: The flash + * + * Configure the hardware with flash, assist and indicator currents, as well as + * flash timeout. + * + * Return 0 on success, or a negative error code if an I2C communication error + * occurred. + */ +static int as3645a_set_config(struct as3645a *flash) +{ + int ret; + u8 val; + + val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT) + | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT) + | AS_CURRENT_LED_DET_ON; + + ret = as3645a_write(flash, AS_CURRENT_SET_REG, val); + if (ret < 0) + return ret; + + val = AS_TIMER_MS_TO_CODE(flash->timeout / 1000) + << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT; + + val |= (flash->pdata->vref << AS_INDICATOR_AND_TIMER_VREF_SHIFT) + | ((flash->indicator_current ? flash->indicator_current - 1 : 0) + << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT); + + return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val); +} + +/* + * as3645a_set_control - Set flash control register + * @flash: The flash + * @mode: Desired output mode + * @on: Desired output state + * + * Configure the hardware with output mode and state. + * + * Return 0 on success, or a negative error code if an I2C communication error + * occurred. + */ +static int +as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on) +{ + u8 reg; + + /* Configure output parameters and operation mode. */ + reg = (flash->pdata->peak << AS_CONTROL_COIL_PEAK_SHIFT) + | (on ? AS_CONTROL_OUT_ON : 0) + | mode; + + if (flash->led_mode == V4L2_FLASH_LED_MODE_FLASH && + flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) { + reg |= AS_CONTROL_STROBE_TYPE_LEVEL + | AS_CONTROL_STROBE_ON; + } + + return as3645a_write(flash, AS_CONTROL_REG, reg); +} + +/* + * as3645a_set_output - Configure output and operation mode + * @flash: Flash controller + * @strobe: Strobe the flash (only valid in flash mode) + * + * Turn the LEDs output on/off and set the operation mode based on the current + * parameters. + * + * The AS3645A can't control the indicator LED independently of the flash/torch + * LED. If the flash controller is in V4L2_FLASH_LED_MODE_NONE mode, set the + * chip to indicator mode. Otherwise set it to assist light (torch) or flash + * mode. + * + * In indicator and assist modes, turn the output on/off based on the indicator + * and torch currents. In software strobe flash mode, turn the output on/off + * based on the strobe parameter. + */ +static int as3645a_set_output(struct as3645a *flash, bool strobe) +{ + enum as_mode mode; + bool on; + + switch (flash->led_mode) { + case V4L2_FLASH_LED_MODE_NONE: + on = flash->indicator_current != 0; + mode = AS_MODE_INDICATOR; + break; + case V4L2_FLASH_LED_MODE_TORCH: + on = true; + mode = AS_MODE_ASSIST; + break; + case V4L2_FLASH_LED_MODE_FLASH: + on = strobe; + mode = AS_MODE_FLASH; + break; + default: + BUG(); + } + + /* Configure output parameters and operation mode. */ + return as3645a_set_control(flash, mode, on); +} + +/* ----------------------------------------------------------------------------- + * V4L2 controls + */ + +static int as3645a_is_active(struct as3645a *flash) +{ + int ret; + + ret = as3645a_read(flash, AS_CONTROL_REG); + return ret < 0 ? ret : !!(ret & AS_CONTROL_OUT_ON); +} + +static int as3645a_read_fault(struct as3645a *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + /* NOTE: reading register clear fault status */ + rval = as3645a_read(flash, AS_FAULT_INFO_REG); + if (rval < 0) + return rval; + + if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) + dev_dbg(&client->dev, "Inductor Peak limit fault\n"); + + if (rval & AS_FAULT_INFO_INDICATOR_LED) + dev_dbg(&client->dev, "Indicator LED fault: " + "Short circuit or open loop\n"); + + dev_dbg(&client->dev, "%u connected LEDs\n", + rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1); + + if (rval & AS_FAULT_INFO_TIMEOUT) + dev_dbg(&client->dev, "Timeout fault\n"); + + if (rval & AS_FAULT_INFO_OVER_TEMPERATURE) + dev_dbg(&client->dev, "Over temperature fault\n"); + + if (rval & AS_FAULT_INFO_SHORT_CIRCUIT) + dev_dbg(&client->dev, "Short circuit fault\n"); + + if (rval & AS_FAULT_INFO_OVER_VOLTAGE) + dev_dbg(&client->dev, "Over voltage fault: " + "Indicates missing capacitor or open connection\n"); + + return rval; +} + +static int as3645a_get_ctrl(struct v4l2_ctrl *ctrl) +{ + struct as3645a *flash = + container_of(ctrl->handler, struct as3645a, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int value; + + switch (ctrl->id) { + case V4L2_CID_FLASH_FAULT: + value = as3645a_read_fault(flash); + if (value < 0) + return value; + + ctrl->cur.val = 0; + if (value & AS_FAULT_INFO_SHORT_CIRCUIT) + ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; + if (value & AS_FAULT_INFO_OVER_TEMPERATURE) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; + if (value & AS_FAULT_INFO_TIMEOUT) + ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; + if (value & AS_FAULT_INFO_OVER_VOLTAGE) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; + if (value & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_CURRENT; + if (value & AS_FAULT_INFO_INDICATOR_LED) + ctrl->cur.val |= V4L2_FLASH_FAULT_INDICATOR; + break; + + case V4L2_CID_FLASH_STROBE_STATUS: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) { + ctrl->cur.val = 0; + break; + } + + value = as3645a_is_active(flash); + if (value < 0) + return value; + + ctrl->cur.val = value; + break; + } + + dev_dbg(&client->dev, "G_CTRL %08x:%d\n", ctrl->id, ctrl->cur.val); + + return 0; +} + +static int as3645a_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct as3645a *flash = + container_of(ctrl->handler, struct as3645a, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int ret; + + dev_dbg(&client->dev, "S_CTRL %08x:%d\n", ctrl->id, ctrl->val); + + /* If a control that doesn't apply to the current mode is modified, + * we store the value and return immediately. The setting will be + * applied when the LED mode is changed. Otherwise we apply the setting + * immediately. + */ + + switch (ctrl->id) { + case V4L2_CID_FLASH_LED_MODE: + if (flash->indicator_current) + return -EBUSY; + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + flash->led_mode = ctrl->val; + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_STROBE_SOURCE: + flash->strobe_source = ctrl->val; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_STROBE: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + return as3645a_set_output(flash, true); + + case V4L2_CID_FLASH_STROBE_STOP: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_TIMEOUT: + flash->timeout = ctrl->val; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_INTENSITY: + flash->flash_current = (ctrl->val - AS3645A_FLASH_INTENSITY_MIN) + / AS3645A_FLASH_INTENSITY_STEP; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_TORCH_INTENSITY: + flash->assist_current = + (ctrl->val - AS3645A_TORCH_INTENSITY_MIN) + / AS3645A_TORCH_INTENSITY_STEP; + + /* Applies to torch mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_TORCH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_INDICATOR_INTENSITY: + if (flash->led_mode != V4L2_FLASH_LED_MODE_NONE) + return -EBUSY; + + flash->indicator_current = + (ctrl->val - AS3645A_INDICATOR_INTENSITY_MIN) + / AS3645A_INDICATOR_INTENSITY_STEP; + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + if ((ctrl->val == 0) == (ctrl->cur.val == 0)) + break; + + return as3645a_set_output(flash, false); + } + + return 0; +} + +static const struct v4l2_ctrl_ops as3645a_ctrl_ops = { + .g_volatile_ctrl = as3645a_get_ctrl, + .s_ctrl = as3645a_set_ctrl, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +/* Put device into know state. */ +static int as3645a_setup(struct as3645a *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int ret; + + /* clear errors */ + ret = as3645a_read(flash, AS_FAULT_INFO_REG); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "Fault info: %02x\n", ret); + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + ret = as3645a_set_output(flash, false); + if (ret < 0) + return ret; + + /* read status */ + ret = as3645a_read_fault(flash); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n", + as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG)); + dev_dbg(&client->dev, "AS_CURRENT_SET_REG: %02x\n", + as3645a_read(flash, AS_CURRENT_SET_REG)); + dev_dbg(&client->dev, "AS_CONTROL_REG: %02x\n", + as3645a_read(flash, AS_CONTROL_REG)); + + return ret & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0; +} + +static int __as3645a_set_power(struct as3645a *flash, int on) +{ + int ret; + + if (!on) + as3645a_set_control(flash, AS_MODE_EXT_TORCH, false); + + if (flash->pdata->set_power) { + ret = flash->pdata->set_power(&flash->subdev, on); + if (ret < 0) + return ret; + } + + if (!on) + return 0; + + ret = as3645a_setup(flash); + if (ret < 0) { + if (flash->pdata->set_power) + flash->pdata->set_power(&flash->subdev, 0); + } + + return ret; +} + +static int as3645a_set_power(struct v4l2_subdev *sd, int on) +{ + struct as3645a *flash = to_as3645a(sd); + int ret = 0; + + mutex_lock(&flash->power_lock); + + if (flash->power_count == !on) { + ret = __as3645a_set_power(flash, !!on); + if (ret < 0) + goto done; + } + + flash->power_count += on ? 1 : -1; + WARN_ON(flash->power_count < 0); + +done: + mutex_unlock(&flash->power_lock); + return ret; +} + +static int as3645a_registered(struct v4l2_subdev *sd) +{ + struct as3645a *flash = to_as3645a(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int rval, man, model, rfu, version; + const char *vendor; + + /* Power up the flash driver and read manufacturer ID, model ID, RFU + * and version. + */ + rval = as3645a_set_power(&flash->subdev, 1); + if (rval < 0) + return rval; + + rval = as3645a_read(flash, AS_DESIGN_INFO_REG); + if (rval < 0) + goto power_off; + + man = AS_DESIGN_INFO_FACTORY(rval); + model = AS_DESIGN_INFO_MODEL(rval); + + rval = as3645a_read(flash, AS_VERSION_CONTROL_REG); + if (rval < 0) + goto power_off; + + rfu = AS_VERSION_CONTROL_RFU(rval); + version = AS_VERSION_CONTROL_VERSION(rval); + + /* Verify the chip model and version. */ + if (model != 0x01 || rfu != 0x00) { + dev_err(&client->dev, "AS3645A not detected " + "(model %d rfu %d)\n", model, rfu); + rval = -ENODEV; + goto power_off; + } + + switch (man) { + case 1: + vendor = "AMS, Austria Micro Systems"; + break; + case 2: + vendor = "ADI, Analog Devices Inc."; + break; + case 3: + vendor = "NSC, National Semiconductor"; + break; + case 4: + vendor = "NXP"; + break; + case 5: + vendor = "TI, Texas Instrument"; + break; + default: + vendor = "Unknown"; + } + + dev_info(&client->dev, "Chip vendor: %s (%d) Version: %d\n", vendor, + man, version); + + rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE); + if (rval < 0) + goto power_off; + + rval = as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE); + if (rval < 0) + goto power_off; + + /* Setup default values. This makes sure that the chip is in a known + * state, in case the power rail can't be controlled. + */ + rval = as3645a_setup(flash); + +power_off: + as3645a_set_power(&flash->subdev, 0); + + return rval; +} + +static int as3645a_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return as3645a_set_power(sd, 1); +} + +static int as3645a_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return as3645a_set_power(sd, 0); +} + +static const struct v4l2_subdev_core_ops as3645a_core_ops = { + .s_power = as3645a_set_power, +}; + +static const struct v4l2_subdev_ops as3645a_ops = { + .core = &as3645a_core_ops, +}; + +static const struct v4l2_subdev_internal_ops as3645a_internal_ops = { + .registered = as3645a_registered, + .open = as3645a_open, + .close = as3645a_close, +}; + +/* ----------------------------------------------------------------------------- + * I2C driver + */ +#ifdef CONFIG_PM + +static int as3645a_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + int rval; + + if (flash->power_count == 0) + return 0; + + rval = __as3645a_set_power(flash, 0); + + dev_dbg(&client->dev, "Suspend %s\n", rval < 0 ? "failed" : "ok"); + + return rval; +} + +static int as3645a_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + int rval; + + if (flash->power_count == 0) + return 0; + + rval = __as3645a_set_power(flash, 1); + + dev_dbg(&client->dev, "Resume %s\n", rval < 0 ? "fail" : "ok"); + + return rval; +} + +#else + +#define as3645a_suspend NULL +#define as3645a_resume NULL + +#endif /* CONFIG_PM */ + +/* + * as3645a_init_controls - Create controls + * @flash: The flash + * + * The number of LEDs reported in platform data is used to compute default + * limits. Parameters passed through platform data can override those limits. + */ +static int as3645a_init_controls(struct as3645a *flash) +{ + const struct as3645a_platform_data *pdata = flash->pdata; + struct v4l2_ctrl *ctrl; + int maximum; + + v4l2_ctrl_handler_init(&flash->ctrls, 10); + + /* V4L2_CID_FLASH_LED_MODE */ + v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_LED_MODE, 2, ~7, + V4L2_FLASH_LED_MODE_NONE); + + /* V4L2_CID_FLASH_STROBE_SOURCE */ + v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_SOURCE, + pdata->ext_strobe ? 1 : 0, + pdata->ext_strobe ? ~3 : ~1, + V4L2_FLASH_STROBE_SOURCE_SOFTWARE); + + flash->strobe_source = V4L2_FLASH_STROBE_SOURCE_SOFTWARE; + + /* V4L2_CID_FLASH_STROBE */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); + + /* V4L2_CID_FLASH_STROBE_STOP */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); + + /* V4L2_CID_FLASH_STROBE_STATUS */ + ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_STATUS, 0, 1, 1, 1); + if (ctrl != NULL) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + /* V4L2_CID_FLASH_TIMEOUT */ + maximum = pdata->timeout_max; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_TIMEOUT, AS3645A_FLASH_TIMEOUT_MIN, + maximum, AS3645A_FLASH_TIMEOUT_STEP, maximum); + + flash->timeout = maximum; + + /* V4L2_CID_FLASH_INTENSITY */ + maximum = pdata->flash_max_current; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_INTENSITY, AS3645A_FLASH_INTENSITY_MIN, + maximum, AS3645A_FLASH_INTENSITY_STEP, maximum); + + flash->flash_current = (maximum - AS3645A_FLASH_INTENSITY_MIN) + / AS3645A_FLASH_INTENSITY_STEP; + + /* V4L2_CID_FLASH_TORCH_INTENSITY */ + maximum = pdata->torch_max_current; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_TORCH_INTENSITY, + AS3645A_TORCH_INTENSITY_MIN, maximum, + AS3645A_TORCH_INTENSITY_STEP, + AS3645A_TORCH_INTENSITY_MIN); + + flash->assist_current = 0; + + /* V4L2_CID_FLASH_INDICATOR_INTENSITY */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_INDICATOR_INTENSITY, + AS3645A_INDICATOR_INTENSITY_MIN, + AS3645A_INDICATOR_INTENSITY_MAX, + AS3645A_INDICATOR_INTENSITY_STEP, + AS3645A_INDICATOR_INTENSITY_MIN); + + flash->indicator_current = 0; + + /* V4L2_CID_FLASH_FAULT */ + ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_FAULT, 0, + V4L2_FLASH_FAULT_OVER_VOLTAGE | + V4L2_FLASH_FAULT_TIMEOUT | + V4L2_FLASH_FAULT_OVER_TEMPERATURE | + V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); + if (ctrl != NULL) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + flash->subdev.ctrl_handler = &flash->ctrls; + + return flash->ctrls.error; +} + +static int as3645a_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct as3645a *flash; + int ret; + + if (client->dev.platform_data == NULL) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_KERNEL); + if (flash == NULL) + return -ENOMEM; + + flash->pdata = client->dev.platform_data; + + v4l2_i2c_subdev_init(&flash->subdev, client, &as3645a_ops); + flash->subdev.internal_ops = &as3645a_internal_ops; + flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + ret = as3645a_init_controls(flash); + if (ret < 0) + goto done; + + ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); + if (ret < 0) + goto done; + + flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + + mutex_init(&flash->power_lock); + + flash->led_mode = V4L2_FLASH_LED_MODE_NONE; + +done: + if (ret < 0) { + v4l2_ctrl_handler_free(&flash->ctrls); + kfree(flash); + } + + return ret; +} + +static int as3645a_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + + v4l2_device_unregister_subdev(subdev); + v4l2_ctrl_handler_free(&flash->ctrls); + media_entity_cleanup(&flash->subdev.entity); + mutex_destroy(&flash->power_lock); + kfree(flash); + + return 0; +} + +static const struct i2c_device_id as3645a_id_table[] = { + { AS3645A_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, as3645a_id_table); + +static const struct dev_pm_ops as3645a_pm_ops = { + .suspend = as3645a_suspend, + .resume = as3645a_resume, +}; + +static struct i2c_driver as3645a_i2c_driver = { + .driver = { + .name = AS3645A_NAME, + .pm = &as3645a_pm_ops, + }, + .probe = as3645a_probe, + .remove = as3645a_remove, + .id_table = as3645a_id_table, +}; + +module_i2c_driver(as3645a_i2c_driver); + +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/bt819.c b/drivers/media/i2c/bt819.c new file mode 100644 index 00000000..377bf05b --- /dev/null +++ b/drivers/media/i2c/bt819.c @@ -0,0 +1,517 @@ +/* + * bt819 - BT819A VideoStream Decoder (Rockwell Part) + * + * Copyright (C) 1999 Mike Bernson + * Copyright (C) 1998 Dave Perks + * + * Modifications for LML33/DC10plus unified driver + * Copyright (C) 2000 Serguei Miridonov + * + * Changes by Ronald Bultje + * - moved over to linux>=2.4.x i2c protocol (9/9/2002) + * + * This code was modify/ported from the saa7111 driver written + * by Dave Perks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Brooktree-819 video decoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +struct bt819 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + unsigned char reg[32]; + + v4l2_std_id norm; + int ident; + int input; + int enable; +}; + +static inline struct bt819 *to_bt819(struct v4l2_subdev *sd) +{ + return container_of(sd, struct bt819, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct bt819, hdl)->sd; +} + +struct timing { + int hactive; + int hdelay; + int vactive; + int vdelay; + int hscale; + int vscale; +}; + +/* for values, see the bt819 datasheet */ +static struct timing timing_data[] = { + {864 - 24, 20, 625 - 2, 1, 0x0504, 0x0000}, + {858 - 24, 20, 525 - 2, 1, 0x00f8, 0x0000}, +}; + +/* ----------------------------------------------------------------------- */ + +static inline int bt819_write(struct bt819 *decoder, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd); + + decoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int bt819_setbit(struct bt819 *decoder, u8 reg, u8 bit, u8 value) +{ + return bt819_write(decoder, reg, + (decoder->reg[reg] & ~(1 << bit)) | (value ? (1 << bit) : 0)); +} + +static int bt819_write_block(struct bt819 *decoder, const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd); + int ret = -1; + u8 reg; + + /* the bt819 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + u8 block_data[32]; + int block_len; + + while (len >= 2) { + block_len = 0; + block_data[block_len++] = reg = data[0]; + do { + block_data[block_len++] = + decoder->reg[reg++] = data[1]; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + ret = bt819_write(decoder, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + } + + return ret; +} + +static inline int bt819_read(struct bt819 *decoder, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int bt819_init(struct v4l2_subdev *sd) +{ + static unsigned char init[] = { + /*0x1f, 0x00,*/ /* Reset */ + 0x01, 0x59, /* 0x01 input format */ + 0x02, 0x00, /* 0x02 temporal decimation */ + 0x03, 0x12, /* 0x03 Cropping msb */ + 0x04, 0x16, /* 0x04 Vertical Delay, lsb */ + 0x05, 0xe0, /* 0x05 Vertical Active lsb */ + 0x06, 0x80, /* 0x06 Horizontal Delay lsb */ + 0x07, 0xd0, /* 0x07 Horizontal Active lsb */ + 0x08, 0x00, /* 0x08 Horizontal Scaling msb */ + 0x09, 0xf8, /* 0x09 Horizontal Scaling lsb */ + 0x0a, 0x00, /* 0x0a Brightness control */ + 0x0b, 0x30, /* 0x0b Miscellaneous control */ + 0x0c, 0xd8, /* 0x0c Luma Gain lsb */ + 0x0d, 0xfe, /* 0x0d Chroma Gain (U) lsb */ + 0x0e, 0xb4, /* 0x0e Chroma Gain (V) msb */ + 0x0f, 0x00, /* 0x0f Hue control */ + 0x12, 0x04, /* 0x12 Output Format */ + 0x13, 0x20, /* 0x13 Vertial Scaling msb 0x00 + chroma comb OFF, line drop scaling, interlace scaling + BUG? Why does turning the chroma comb on fuck up color? + Bug in the bt819 stepping on my board? + */ + 0x14, 0x00, /* 0x14 Vertial Scaling lsb */ + 0x16, 0x07, /* 0x16 Video Timing Polarity + ACTIVE=active low + FIELD: high=odd, + vreset=active high, + hreset=active high */ + 0x18, 0x68, /* 0x18 AGC Delay */ + 0x19, 0x5d, /* 0x19 Burst Gate Delay */ + 0x1a, 0x80, /* 0x1a ADC Interface */ + }; + + struct bt819 *decoder = to_bt819(sd); + struct timing *timing = &timing_data[(decoder->norm & V4L2_STD_525_60) ? 1 : 0]; + + init[0x03 * 2 - 1] = + (((timing->vdelay >> 8) & 0x03) << 6) | + (((timing->vactive >> 8) & 0x03) << 4) | + (((timing->hdelay >> 8) & 0x03) << 2) | + ((timing->hactive >> 8) & 0x03); + init[0x04 * 2 - 1] = timing->vdelay & 0xff; + init[0x05 * 2 - 1] = timing->vactive & 0xff; + init[0x06 * 2 - 1] = timing->hdelay & 0xff; + init[0x07 * 2 - 1] = timing->hactive & 0xff; + init[0x08 * 2 - 1] = timing->hscale >> 8; + init[0x09 * 2 - 1] = timing->hscale & 0xff; + /* 0x15 in array is address 0x19 */ + init[0x15 * 2 - 1] = (decoder->norm & V4L2_STD_625_50) ? 115 : 93; /* Chroma burst delay */ + /* reset */ + bt819_write(decoder, 0x1f, 0x00); + mdelay(1); + + /* init */ + return bt819_write_block(decoder, init, sizeof(init)); +} + +/* ----------------------------------------------------------------------- */ + +static int bt819_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd) +{ + struct bt819 *decoder = to_bt819(sd); + int status = bt819_read(decoder, 0x00); + int res = V4L2_IN_ST_NO_SIGNAL; + v4l2_std_id std; + + if ((status & 0x80)) + res = 0; + + if ((status & 0x10)) + std = V4L2_STD_PAL; + else + std = V4L2_STD_NTSC; + if (pstd) + *pstd = std; + if (pstatus) + *pstatus = res; + + v4l2_dbg(1, debug, sd, "get status %x\n", status); + return 0; +} + +static int bt819_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + return bt819_status(sd, NULL, std); +} + +static int bt819_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + return bt819_status(sd, status, NULL); +} + +static int bt819_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct bt819 *decoder = to_bt819(sd); + struct timing *timing = NULL; + + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL) + v4l2_err(sd, "no notify found!\n"); + + if (std & V4L2_STD_NTSC) { + v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL); + bt819_setbit(decoder, 0x01, 0, 1); + bt819_setbit(decoder, 0x01, 1, 0); + bt819_setbit(decoder, 0x01, 5, 0); + bt819_write(decoder, 0x18, 0x68); + bt819_write(decoder, 0x19, 0x5d); + /* bt819_setbit(decoder, 0x1a, 5, 1); */ + timing = &timing_data[1]; + } else if (std & V4L2_STD_PAL) { + v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL); + bt819_setbit(decoder, 0x01, 0, 1); + bt819_setbit(decoder, 0x01, 1, 1); + bt819_setbit(decoder, 0x01, 5, 1); + bt819_write(decoder, 0x18, 0x7f); + bt819_write(decoder, 0x19, 0x72); + /* bt819_setbit(decoder, 0x1a, 5, 0); */ + timing = &timing_data[0]; + } else { + v4l2_dbg(1, debug, sd, "unsupported norm %llx\n", + (unsigned long long)std); + return -EINVAL; + } + bt819_write(decoder, 0x03, + (((timing->vdelay >> 8) & 0x03) << 6) | + (((timing->vactive >> 8) & 0x03) << 4) | + (((timing->hdelay >> 8) & 0x03) << 2) | + ((timing->hactive >> 8) & 0x03)); + bt819_write(decoder, 0x04, timing->vdelay & 0xff); + bt819_write(decoder, 0x05, timing->vactive & 0xff); + bt819_write(decoder, 0x06, timing->hdelay & 0xff); + bt819_write(decoder, 0x07, timing->hactive & 0xff); + bt819_write(decoder, 0x08, (timing->hscale >> 8) & 0xff); + bt819_write(decoder, 0x09, timing->hscale & 0xff); + decoder->norm = std; + v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL); + return 0; +} + +static int bt819_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct bt819 *decoder = to_bt819(sd); + + v4l2_dbg(1, debug, sd, "set input %x\n", input); + + if (input > 7) + return -EINVAL; + + if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL) + v4l2_err(sd, "no notify found!\n"); + + if (decoder->input != input) { + v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL); + decoder->input = input; + /* select mode */ + if (decoder->input == 0) { + bt819_setbit(decoder, 0x0b, 6, 0); + bt819_setbit(decoder, 0x1a, 1, 1); + } else { + bt819_setbit(decoder, 0x0b, 6, 1); + bt819_setbit(decoder, 0x1a, 1, 0); + } + v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL); + } + return 0; +} + +static int bt819_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct bt819 *decoder = to_bt819(sd); + + v4l2_dbg(1, debug, sd, "enable output %x\n", enable); + + if (decoder->enable != enable) { + decoder->enable = enable; + bt819_setbit(decoder, 0x16, 7, !enable); + } + return 0; +} + +static int bt819_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct bt819 *decoder = to_bt819(sd); + int temp; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + bt819_write(decoder, 0x0a, ctrl->val); + break; + + case V4L2_CID_CONTRAST: + bt819_write(decoder, 0x0c, ctrl->val & 0xff); + bt819_setbit(decoder, 0x0b, 2, ((ctrl->val >> 8) & 0x01)); + break; + + case V4L2_CID_SATURATION: + bt819_write(decoder, 0x0d, (ctrl->val >> 7) & 0xff); + bt819_setbit(decoder, 0x0b, 1, ((ctrl->val >> 15) & 0x01)); + + /* Ratio between U gain and V gain must stay the same as + the ratio between the default U and V gain values. */ + temp = (ctrl->val * 180) / 254; + bt819_write(decoder, 0x0e, (temp >> 7) & 0xff); + bt819_setbit(decoder, 0x0b, 0, (temp >> 15) & 0x01); + break; + + case V4L2_CID_HUE: + bt819_write(decoder, 0x0f, ctrl->val); + break; + + default: + return -EINVAL; + } + return 0; +} + +static int bt819_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct bt819 *decoder = to_bt819(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, decoder->ident, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops bt819_ctrl_ops = { + .s_ctrl = bt819_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops bt819_core_ops = { + .g_chip_ident = bt819_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = bt819_s_std, +}; + +static const struct v4l2_subdev_video_ops bt819_video_ops = { + .s_routing = bt819_s_routing, + .s_stream = bt819_s_stream, + .querystd = bt819_querystd, + .g_input_status = bt819_g_input_status, +}; + +static const struct v4l2_subdev_ops bt819_ops = { + .core = &bt819_core_ops, + .video = &bt819_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int bt819_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i, ver; + struct bt819 *decoder; + struct v4l2_subdev *sd; + const char *name; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + decoder = kzalloc(sizeof(struct bt819), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &bt819_ops); + + ver = bt819_read(decoder, 0x17); + switch (ver & 0xf0) { + case 0x70: + name = "bt819a"; + decoder->ident = V4L2_IDENT_BT819A; + break; + case 0x60: + name = "bt817a"; + decoder->ident = V4L2_IDENT_BT817A; + break; + case 0x20: + name = "bt815a"; + decoder->ident = V4L2_IDENT_BT815A; + break; + default: + v4l2_dbg(1, debug, sd, + "unknown chip version 0x%02x\n", ver); + return -ENODEV; + } + + v4l_info(client, "%s found @ 0x%x (%s)\n", name, + client->addr << 1, client->adapter->name); + + decoder->norm = V4L2_STD_NTSC; + decoder->input = 0; + decoder->enable = 1; + + i = bt819_init(sd); + if (i < 0) + v4l2_dbg(1, debug, sd, "init status %d\n", i); + + v4l2_ctrl_handler_init(&decoder->hdl, 4); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_CONTRAST, 0, 511, 1, 0xd8); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_SATURATION, 0, 511, 1, 0xfe); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + return 0; +} + +static int bt819_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct bt819 *decoder = to_bt819(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id bt819_id[] = { + { "bt819a", 0 }, + { "bt817a", 0 }, + { "bt815a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt819_id); + +static struct i2c_driver bt819_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "bt819", + }, + .probe = bt819_probe, + .remove = bt819_remove, + .id_table = bt819_id, +}; + +module_i2c_driver(bt819_driver); diff --git a/drivers/media/i2c/bt856.c b/drivers/media/i2c/bt856.c new file mode 100644 index 00000000..7e5bd365 --- /dev/null +++ b/drivers/media/i2c/bt856.c @@ -0,0 +1,273 @@ +/* + * bt856 - BT856A Digital Video Encoder (Rockwell Part) + * + * Copyright (C) 1999 Mike Bernson + * Copyright (C) 1998 Dave Perks + * + * Modifications for LML33/DC10plus unified driver + * Copyright (C) 2000 Serguei Miridonov + * + * This code was modify/ported from the saa7111 driver written + * by Dave Perks. + * + * Changes by Ronald Bultje + * - moved over to linux>=2.4.x i2c protocol (9/9/2002) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Brooktree-856A video encoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +#define BT856_REG_OFFSET 0xDA +#define BT856_NR_REG 6 + +struct bt856 { + struct v4l2_subdev sd; + unsigned char reg[BT856_NR_REG]; + + v4l2_std_id norm; +}; + +static inline struct bt856 *to_bt856(struct v4l2_subdev *sd) +{ + return container_of(sd, struct bt856, sd); +} + +/* ----------------------------------------------------------------------- */ + +static inline int bt856_write(struct bt856 *encoder, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd); + + encoder->reg[reg - BT856_REG_OFFSET] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int bt856_setbit(struct bt856 *encoder, u8 reg, u8 bit, u8 value) +{ + return bt856_write(encoder, reg, + (encoder->reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) | + (value ? (1 << bit) : 0)); +} + +static void bt856_dump(struct bt856 *encoder) +{ + int i; + + v4l2_info(&encoder->sd, "register dump:\n"); + for (i = 0; i < BT856_NR_REG; i += 2) + printk(KERN_CONT " %02x", encoder->reg[i]); + printk(KERN_CONT "\n"); +} + +/* ----------------------------------------------------------------------- */ + +static int bt856_init(struct v4l2_subdev *sd, u32 arg) +{ + struct bt856 *encoder = to_bt856(sd); + + /* This is just for testing!!! */ + v4l2_dbg(1, debug, sd, "init\n"); + bt856_write(encoder, 0xdc, 0x18); + bt856_write(encoder, 0xda, 0); + bt856_write(encoder, 0xde, 0); + + bt856_setbit(encoder, 0xdc, 3, 1); + /*bt856_setbit(encoder, 0xdc, 6, 0);*/ + bt856_setbit(encoder, 0xdc, 4, 1); + + if (encoder->norm & V4L2_STD_NTSC) + bt856_setbit(encoder, 0xdc, 2, 0); + else + bt856_setbit(encoder, 0xdc, 2, 1); + + bt856_setbit(encoder, 0xdc, 1, 1); + bt856_setbit(encoder, 0xde, 4, 0); + bt856_setbit(encoder, 0xde, 3, 1); + if (debug != 0) + bt856_dump(encoder); + return 0; +} + +static int bt856_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct bt856 *encoder = to_bt856(sd); + + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + if (std & V4L2_STD_NTSC) { + bt856_setbit(encoder, 0xdc, 2, 0); + } else if (std & V4L2_STD_PAL) { + bt856_setbit(encoder, 0xdc, 2, 1); + bt856_setbit(encoder, 0xda, 0, 0); + /*bt856_setbit(encoder, 0xda, 0, 1);*/ + } else { + return -EINVAL; + } + encoder->norm = std; + if (debug != 0) + bt856_dump(encoder); + return 0; +} + +static int bt856_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct bt856 *encoder = to_bt856(sd); + + v4l2_dbg(1, debug, sd, "set input %d\n", input); + + /* We only have video bus. + * input= 0: input is from bt819 + * input= 1: input is from ZR36060 */ + switch (input) { + case 0: + bt856_setbit(encoder, 0xde, 4, 0); + bt856_setbit(encoder, 0xde, 3, 1); + bt856_setbit(encoder, 0xdc, 3, 1); + bt856_setbit(encoder, 0xdc, 6, 0); + break; + case 1: + bt856_setbit(encoder, 0xde, 4, 0); + bt856_setbit(encoder, 0xde, 3, 1); + bt856_setbit(encoder, 0xdc, 3, 1); + bt856_setbit(encoder, 0xdc, 6, 1); + break; + case 2: /* Color bar */ + bt856_setbit(encoder, 0xdc, 3, 0); + bt856_setbit(encoder, 0xde, 4, 1); + break; + default: + return -EINVAL; + } + + if (debug != 0) + bt856_dump(encoder); + return 0; +} + +static int bt856_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT856, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops bt856_core_ops = { + .g_chip_ident = bt856_g_chip_ident, + .init = bt856_init, +}; + +static const struct v4l2_subdev_video_ops bt856_video_ops = { + .s_std_output = bt856_s_std_output, + .s_routing = bt856_s_routing, +}; + +static const struct v4l2_subdev_ops bt856_ops = { + .core = &bt856_core_ops, + .video = &bt856_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int bt856_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bt856 *encoder; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &bt856_ops); + encoder->norm = V4L2_STD_NTSC; + + bt856_write(encoder, 0xdc, 0x18); + bt856_write(encoder, 0xda, 0); + bt856_write(encoder, 0xde, 0); + + bt856_setbit(encoder, 0xdc, 3, 1); + /*bt856_setbit(encoder, 0xdc, 6, 0);*/ + bt856_setbit(encoder, 0xdc, 4, 1); + + if (encoder->norm & V4L2_STD_NTSC) + bt856_setbit(encoder, 0xdc, 2, 0); + else + bt856_setbit(encoder, 0xdc, 2, 1); + + bt856_setbit(encoder, 0xdc, 1, 1); + bt856_setbit(encoder, 0xde, 4, 0); + bt856_setbit(encoder, 0xde, 3, 1); + + if (debug != 0) + bt856_dump(encoder); + return 0; +} + +static int bt856_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_bt856(sd)); + return 0; +} + +static const struct i2c_device_id bt856_id[] = { + { "bt856", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt856_id); + +static struct i2c_driver bt856_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "bt856", + }, + .probe = bt856_probe, + .remove = bt856_remove, + .id_table = bt856_id, +}; + +module_i2c_driver(bt856_driver); diff --git a/drivers/media/i2c/bt866.c b/drivers/media/i2c/bt866.c new file mode 100644 index 00000000..905320b6 --- /dev/null +++ b/drivers/media/i2c/bt866.c @@ -0,0 +1,243 @@ +/* + bt866 - BT866 Digital Video Encoder (Rockwell Part) + + Copyright (C) 1999 Mike Bernson + Copyright (C) 1998 Dave Perks + + Modifications for LML33/DC10plus unified driver + Copyright (C) 2000 Serguei Miridonov + + This code was modify/ported from the saa7111 driver written + by Dave Perks. + + This code was adapted for the bt866 by Christer Weinigel and ported + to 2.6 by Martin Samuelsson. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Brooktree-866 video encoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +struct bt866 { + struct v4l2_subdev sd; + u8 reg[256]; +}; + +static inline struct bt866 *to_bt866(struct v4l2_subdev *sd) +{ + return container_of(sd, struct bt866, sd); +} + +static int bt866_write(struct bt866 *encoder, u8 subaddr, u8 data) +{ + struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd); + u8 buffer[2]; + int err; + + buffer[0] = subaddr; + buffer[1] = data; + + encoder->reg[subaddr] = data; + + v4l_dbg(1, debug, client, "write 0x%02x = 0x%02x\n", subaddr, data); + + for (err = 0; err < 3;) { + if (i2c_master_send(client, buffer, 2) == 2) + break; + err++; + v4l_warn(client, "error #%d writing to 0x%02x\n", + err, subaddr); + schedule_timeout_interruptible(msecs_to_jiffies(100)); + } + if (err == 3) { + v4l_warn(client, "giving up\n"); + return -1; + } + + return 0; +} + +static int bt866_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + /* Only PAL supported by this driver at the moment! */ + if (!(std & V4L2_STD_NTSC)) + return -EINVAL; + return 0; +} + +static int bt866_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + static const __u8 init[] = { + 0xc8, 0xcc, /* CRSCALE */ + 0xca, 0x91, /* CBSCALE */ + 0xcc, 0x24, /* YC16 | OSDNUM */ + 0xda, 0x00, /* */ + 0xdc, 0x24, /* SETMODE | PAL */ + 0xde, 0x02, /* EACTIVE */ + + /* overlay colors */ + 0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */ + 0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */ + 0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */ + 0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */ + 0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */ + 0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */ + 0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */ + 0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */ + + 0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */ + 0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */ + 0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */ + 0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */ + 0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */ + 0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */ + 0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */ + 0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */ + }; + struct bt866 *encoder = to_bt866(sd); + u8 val; + int i; + + for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) + bt866_write(encoder, init[i], init[i+1]); + + val = encoder->reg[0xdc]; + + if (input == 0) + val |= 0x40; /* CBSWAP */ + else + val &= ~0x40; /* !CBSWAP */ + + bt866_write(encoder, 0xdc, val); + + val = encoder->reg[0xcc]; + if (input == 2) + val |= 0x01; /* OSDBAR */ + else + val &= ~0x01; /* !OSDBAR */ + bt866_write(encoder, 0xcc, val); + + v4l2_dbg(1, debug, sd, "set input %d\n", input); + + switch (input) { + case 0: + case 1: + case 2: + break; + default: + return -EINVAL; + } + return 0; +} + +#if 0 +/* Code to setup square pixels, might be of some use in the future, + but is currently unused. */ + val = encoder->reg[0xdc]; + if (*iarg) + val |= 1; /* SQUARE */ + else + val &= ~1; /* !SQUARE */ + bt866_write(client, 0xdc, val); +#endif + +static int bt866_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT866, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops bt866_core_ops = { + .g_chip_ident = bt866_g_chip_ident, +}; + +static const struct v4l2_subdev_video_ops bt866_video_ops = { + .s_std_output = bt866_s_std_output, + .s_routing = bt866_s_routing, +}; + +static const struct v4l2_subdev_ops bt866_ops = { + .core = &bt866_core_ops, + .video = &bt866_video_ops, +}; + +static int bt866_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bt866 *encoder; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(*encoder), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &bt866_ops); + return 0; +} + +static int bt866_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_bt866(sd)); + return 0; +} + +static const struct i2c_device_id bt866_id[] = { + { "bt866", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt866_id); + +static struct i2c_driver bt866_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "bt866", + }, + .probe = bt866_probe, + .remove = bt866_remove, + .id_table = bt866_id, +}; + +module_i2c_driver(bt866_driver); diff --git a/drivers/media/i2c/cs5345.c b/drivers/media/i2c/cs5345.c new file mode 100644 index 00000000..1d2f7c85 --- /dev/null +++ b/drivers/media/i2c/cs5345.c @@ -0,0 +1,252 @@ +/* + * cs5345 Cirrus Logic 24-bit, 192 kHz Stereo Audio ADC + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("i2c device driver for cs5345 Audio ADC"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static bool debug; + +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); + +struct cs5345_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; +}; + +static inline struct cs5345_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct cs5345_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cs5345_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ + +static inline int cs5345_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int cs5345_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int cs5345_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + if ((input & 0xf) > 6) { + v4l2_err(sd, "Invalid input %d.\n", input); + return -EINVAL; + } + cs5345_write(sd, 0x09, input & 0xf); + cs5345_write(sd, 0x05, input & 0xf0); + return 0; +} + +static int cs5345_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + cs5345_write(sd, 0x04, ctrl->val ? 0x80 : 0); + return 0; + case V4L2_CID_AUDIO_VOLUME: + cs5345_write(sd, 0x07, ((u8)ctrl->val) & 0x3f); + cs5345_write(sd, 0x08, ((u8)ctrl->val) & 0x3f); + return 0; + } + return -EINVAL; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cs5345_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 1; + reg->val = cs5345_read(sd, reg->reg & 0x1f); + return 0; +} + +static int cs5345_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cs5345_write(sd, reg->reg & 0x1f, reg->val & 0xff); + return 0; +} +#endif + +static int cs5345_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_CS5345, 0); +} + +static int cs5345_log_status(struct v4l2_subdev *sd) +{ + u8 v = cs5345_read(sd, 0x09) & 7; + u8 m = cs5345_read(sd, 0x04); + int vol = cs5345_read(sd, 0x08) & 0x3f; + + v4l2_info(sd, "Input: %d%s\n", v, + (m & 0x80) ? " (muted)" : ""); + if (vol >= 32) + vol = vol - 64; + v4l2_info(sd, "Volume: %d dB\n", vol); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops cs5345_ctrl_ops = { + .s_ctrl = cs5345_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops cs5345_core_ops = { + .log_status = cs5345_log_status, + .g_chip_ident = cs5345_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = cs5345_g_register, + .s_register = cs5345_s_register, +#endif +}; + +static const struct v4l2_subdev_audio_ops cs5345_audio_ops = { + .s_routing = cs5345_s_routing, +}; + +static const struct v4l2_subdev_ops cs5345_ops = { + .core = &cs5345_core_ops, + .audio = &cs5345_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int cs5345_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cs5345_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct cs5345_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &cs5345_ops); + + v4l2_ctrl_handler_init(&state->hdl, 2); + v4l2_ctrl_new_std(&state->hdl, &cs5345_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cs5345_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, -24, 24, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + /* set volume/mute */ + v4l2_ctrl_handler_setup(&state->hdl); + + cs5345_write(sd, 0x02, 0x00); + cs5345_write(sd, 0x04, 0x01); + cs5345_write(sd, 0x09, 0x01); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int cs5345_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct cs5345_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id cs5345_id[] = { + { "cs5345", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cs5345_id); + +static struct i2c_driver cs5345_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "cs5345", + }, + .probe = cs5345_probe, + .remove = cs5345_remove, + .id_table = cs5345_id, +}; + +module_i2c_driver(cs5345_driver); diff --git a/drivers/media/i2c/cs53l32a.c b/drivers/media/i2c/cs53l32a.c new file mode 100644 index 00000000..b2939122 --- /dev/null +++ b/drivers/media/i2c/cs53l32a.c @@ -0,0 +1,251 @@ +/* + * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver. + * Copyright (C) 2005 Martin Vaughan + * + * Audio source switching for Adaptec AVC-2410 added by Trev Jackson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC"); +MODULE_AUTHOR("Martin Vaughan"); +MODULE_LICENSE("GPL"); + +static bool debug; + +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); + + +struct cs53l32a_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; +}; + +static inline struct cs53l32a_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct cs53l32a_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cs53l32a_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ + +static int cs53l32a_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int cs53l32a_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int cs53l32a_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + /* There are 2 physical inputs, but the second input can be + placed in two modes, the first mode bypasses the PGA (gain), + the second goes through the PGA. Hence there are three + possible inputs to choose from. */ + if (input > 2) { + v4l2_err(sd, "Invalid input %d.\n", input); + return -EINVAL; + } + cs53l32a_write(sd, 0x01, 0x01 + (input << 4)); + return 0; +} + +static int cs53l32a_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + cs53l32a_write(sd, 0x03, ctrl->val ? 0xf0 : 0x30); + return 0; + case V4L2_CID_AUDIO_VOLUME: + cs53l32a_write(sd, 0x04, (u8)ctrl->val); + cs53l32a_write(sd, 0x05, (u8)ctrl->val); + return 0; + } + return -EINVAL; +} + +static int cs53l32a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, + chip, V4L2_IDENT_CS53l32A, 0); +} + +static int cs53l32a_log_status(struct v4l2_subdev *sd) +{ + struct cs53l32a_state *state = to_state(sd); + u8 v = cs53l32a_read(sd, 0x01); + + v4l2_info(sd, "Input: %d\n", (v >> 4) & 3); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops cs53l32a_ctrl_ops = { + .s_ctrl = cs53l32a_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops cs53l32a_core_ops = { + .log_status = cs53l32a_log_status, + .g_chip_ident = cs53l32a_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_audio_ops cs53l32a_audio_ops = { + .s_routing = cs53l32a_s_routing, +}; + +static const struct v4l2_subdev_ops cs53l32a_ops = { + .core = &cs53l32a_core_ops, + .audio = &cs53l32a_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static int cs53l32a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cs53l32a_state *state; + struct v4l2_subdev *sd; + int i; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + if (!id) + strlcpy(client->name, "cs53l32a", sizeof(client->name)); + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct cs53l32a_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &cs53l32a_ops); + + for (i = 1; i <= 7; i++) { + u8 v = cs53l32a_read(sd, i); + + v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v); + } + + v4l2_ctrl_handler_init(&state->hdl, 2); + v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, -96, 12, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + + /* Set cs53l32a internal register for Adaptec 2010/2410 setup */ + + cs53l32a_write(sd, 0x01, 0x21); + cs53l32a_write(sd, 0x02, 0x29); + cs53l32a_write(sd, 0x03, 0x30); + cs53l32a_write(sd, 0x04, 0x00); + cs53l32a_write(sd, 0x05, 0x00); + cs53l32a_write(sd, 0x06, 0x00); + cs53l32a_write(sd, 0x07, 0x00); + + /* Display results, should be 0x21,0x29,0x30,0x00,0x00,0x00,0x00 */ + + for (i = 1; i <= 7; i++) { + u8 v = cs53l32a_read(sd, i); + + v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v); + } + return 0; +} + +static int cs53l32a_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct cs53l32a_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +static const struct i2c_device_id cs53l32a_id[] = { + { "cs53l32a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cs53l32a_id); + +static struct i2c_driver cs53l32a_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "cs53l32a", + }, + .probe = cs53l32a_probe, + .remove = cs53l32a_remove, + .id_table = cs53l32a_id, +}; + +module_i2c_driver(cs53l32a_driver); diff --git a/drivers/media/i2c/cx25840/Kconfig b/drivers/media/i2c/cx25840/Kconfig new file mode 100644 index 00000000..451133ad --- /dev/null +++ b/drivers/media/i2c/cx25840/Kconfig @@ -0,0 +1,8 @@ +config VIDEO_CX25840 + tristate "Conexant CX2584x audio/video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Conexant CX2584x audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called cx25840 diff --git a/drivers/media/i2c/cx25840/Makefile b/drivers/media/i2c/cx25840/Makefile new file mode 100644 index 00000000..898eb133 --- /dev/null +++ b/drivers/media/i2c/cx25840/Makefile @@ -0,0 +1,6 @@ +cx25840-objs := cx25840-core.o cx25840-audio.o cx25840-firmware.o \ + cx25840-vbi.o cx25840-ir.o + +obj-$(CONFIG_VIDEO_CX25840) += cx25840.o + +ccflags-y += -Idrivers/media/i2c diff --git a/drivers/media/i2c/cx25840/cx25840-audio.c b/drivers/media/i2c/cx25840/cx25840-audio.c new file mode 100644 index 00000000..34b96c7c --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-audio.c @@ -0,0 +1,571 @@ +/* cx25840 audio functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include +#include + +#include "cx25840-core.h" + +/* + * Note: The PLL and SRC parameters are based on a reference frequency that + * would ideally be: + * + * NTSC Color subcarrier freq * 8 = 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz + * + * However, it's not the exact reference frequency that matters, only that the + * firmware and modules that comprise the driver for a particular board all + * use the same value (close to the ideal value). + * + * Comments below will note which reference frequency is assumed for various + * parameters. They will usually be one of + * + * ref_freq = 28.636360 MHz + * or + * ref_freq = 28.636363 MHz + */ + +static int cx25840_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x06, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x1006040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x1bb39ee + * 28636363 * 0x6.dd9cf70/0x10 = 32000 * 384 + * 196.6 MHz pre-postdivide + * FIXME < 200 MHz is out of specified valid range + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x01bb39ee); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */ + cx25840_write4(client, 0x900, 0x0801f77f); + cx25840_write4(client, 0x904, 0x0801f77f); + cx25840_write4(client, 0x90c, 0x0801f77f); + break; + + case 44100: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x1009040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x0ec6bd6 + * 28636363 * 0x9.7635eb0/0x10 = 44100 * 384 + * 271 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x00ec6bd6); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */ + cx25840_write4(client, 0x900, 0x08016d59); + cx25840_write4(client, 0x904, 0x08016d59); + cx25840_write4(client, 0x90c, 0x08016d59); + break; + + case 48000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x100a040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x098d6e5 + * 28636363 * 0xa.4c6b728/0x10 = 48000 * 384 + * 295 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x0098d6e5); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } else { + switch (freq) { + case 32000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x08, AUX PLL Post Divider = 0x1e + */ + cx25840_write4(client, 0x108, 0x1e08040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x12a0869 + * 28636363 * 0x8.9504348/0x1e = 32000 * 256 + * 246 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x012a0869); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x14 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x54); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.0000 = 32000/32000 */ + cx25840_write4(client, 0x8f8, 0x08010000); + + /* src3/4/6_ctl */ + /* 0x2.0000 = 2 * (32000/32000) */ + cx25840_write4(client, 0x900, 0x08020000); + cx25840_write4(client, 0x904, 0x08020000); + cx25840_write4(client, 0x90c, 0x08020000); + break; + + case 44100: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x18 + */ + cx25840_write4(client, 0x108, 0x1809040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x0ec6bd6 + * 28636363 * 0x9.7635eb0/0x18 = 44100 * 256 + * 271 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x00ec6bd6); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.60cd = 44100/32000 */ + cx25840_write4(client, 0x8f8, 0x080160cd); + + /* src3/4/6_ctl */ + /* 0x1.7385 = 2 * (32000/44100) */ + cx25840_write4(client, 0x900, 0x08017385); + cx25840_write4(client, 0x904, 0x08017385); + cx25840_write4(client, 0x90c, 0x08017385); + break; + + case 48000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x18 + */ + cx25840_write4(client, 0x108, 0x180a040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x098d6e5 + * 28636363 * 0xa.4c6b728/0x18 = 48000 * 256 + * 295 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x0098d6e5); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.8000 = 48000/32000 */ + cx25840_write4(client, 0x8f8, 0x08018000); + + /* src3/4/6_ctl */ + /* 0x1.5555 = 2 * (32000/48000) */ + cx25840_write4(client, 0x900, 0x08015555); + cx25840_write4(client, 0x904, 0x08015555); + cx25840_write4(client, 0x90c, 0x08015555); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static inline int cx25836_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + return cx25840_set_audclk_freq(client, freq); +} + +static int cx23885_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + case 44100: + case 48000: + /* We don't have register values + * so avoid destroying registers. */ + /* FIXME return -EINVAL; */ + break; + } + } else { + switch (freq) { + case 32000: + case 44100: + /* We don't have register values + * so avoid destroying registers. */ + /* FIXME return -EINVAL; */ + break; + + case 48000: + /* src1_ctl */ + /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */ + cx25840_write4(client, 0x8f8, 0x0801867c); + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static int cx231xx_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + /* src3/4/6_ctl */ + /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */ + cx25840_write4(client, 0x900, 0x0801f77f); + cx25840_write4(client, 0x904, 0x0801f77f); + cx25840_write4(client, 0x90c, 0x0801f77f); + break; + + case 44100: + /* src3/4/6_ctl */ + /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */ + cx25840_write4(client, 0x900, 0x08016d59); + cx25840_write4(client, 0x904, 0x08016d59); + cx25840_write4(client, 0x90c, 0x08016d59); + break; + + case 48000: + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } else { + switch (freq) { + /* FIXME These cases make different assumptions about audclk */ + case 32000: + /* src1_ctl */ + /* 0x1.0000 = 32000/32000 */ + cx25840_write4(client, 0x8f8, 0x08010000); + + /* src3/4/6_ctl */ + /* 0x2.0000 = 2 * (32000/32000) */ + cx25840_write4(client, 0x900, 0x08020000); + cx25840_write4(client, 0x904, 0x08020000); + cx25840_write4(client, 0x90c, 0x08020000); + break; + + case 44100: + /* src1_ctl */ + /* 0x1.60cd = 44100/32000 */ + cx25840_write4(client, 0x8f8, 0x080160cd); + + /* src3/4/6_ctl */ + /* 0x1.7385 = 2 * (32000/44100) */ + cx25840_write4(client, 0x900, 0x08017385); + cx25840_write4(client, 0x904, 0x08017385); + cx25840_write4(client, 0x90c, 0x08017385); + break; + + case 48000: + /* src1_ctl */ + /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */ + cx25840_write4(client, 0x8f8, 0x0801867c); + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static int set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (freq != 32000 && freq != 44100 && freq != 48000) + return -EINVAL; + + if (is_cx231xx(state)) + return cx231xx_set_audclk_freq(client, freq); + + if (is_cx2388x(state)) + return cx23885_set_audclk_freq(client, freq); + + if (is_cx2583x(state)) + return cx25836_set_audclk_freq(client, freq); + + return cx25840_set_audclk_freq(client, freq); +} + +void cx25840_audio_set_path(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (!is_cx2583x(state)) { + /* assert soft reset */ + cx25840_and_or(client, 0x810, ~0x1, 0x01); + + /* stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0); + + /* Mute everything to prevent the PFFT! */ + cx25840_write(client, 0x8d3, 0x1f); + + if (state->aud_input == CX25840_AUDIO_SERIAL) { + /* Set Path1 to Serial Audio Input */ + cx25840_write4(client, 0x8d0, 0x01011012); + + /* The microcontroller should not be started for the + * non-tuner inputs: autodetection is specific for + * TV audio. */ + } else { + /* Set Path1 to Analog Demod Main Channel */ + cx25840_write4(client, 0x8d0, 0x1f063870); + } + } + + set_audclk_freq(client, state->audclk_freq); + + if (!is_cx2583x(state)) { + if (state->aud_input != CX25840_AUDIO_SERIAL) { + /* When the microcontroller detects the + * audio format, it will unmute the lines */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } + + /* deassert soft reset */ + cx25840_and_or(client, 0x810, ~0x1, 0x00); + + /* Ensure the controller is running when we exit */ + if (is_cx2388x(state) || is_cx231xx(state)) + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } +} + +static void set_volume(struct i2c_client *client, int volume) +{ + int vol; + + /* Convert the volume to msp3400 values (0-127) */ + vol = volume >> 9; + + /* now scale it up to cx25840 values + * -114dB to -96dB maps to 0 + * this should be 19, but in my testing that was 4dB too loud */ + if (vol <= 23) { + vol = 0; + } else { + vol -= 23; + } + + /* PATH1_VOLUME */ + cx25840_write(client, 0x8d4, 228 - (vol * 2)); +} + +static void set_balance(struct i2c_client *client, int balance) +{ + int bal = balance >> 8; + if (bal > 0x80) { + /* PATH1_BAL_LEFT */ + cx25840_and_or(client, 0x8d5, 0x7f, 0x80); + /* PATH1_BAL_LEVEL */ + cx25840_and_or(client, 0x8d5, ~0x7f, bal & 0x7f); + } else { + /* PATH1_BAL_LEFT */ + cx25840_and_or(client, 0x8d5, 0x7f, 0x00); + /* PATH1_BAL_LEVEL */ + cx25840_and_or(client, 0x8d5, ~0x7f, 0x80 - bal); + } +} + +int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + int retval; + + if (!is_cx2583x(state)) + cx25840_and_or(client, 0x810, ~0x1, 1); + if (state->aud_input != CX25840_AUDIO_SERIAL) { + cx25840_and_or(client, 0x803, ~0x10, 0); + cx25840_write(client, 0x8d3, 0x1f); + } + retval = set_audclk_freq(client, freq); + if (state->aud_input != CX25840_AUDIO_SERIAL) + cx25840_and_or(client, 0x803, ~0x10, 0x10); + if (!is_cx2583x(state)) + cx25840_and_or(client, 0x810, ~0x1, 0); + return retval; +} + +static int cx25840_audio_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + if (state->mute->val) + set_volume(client, 0); + else + set_volume(client, state->volume->val); + break; + case V4L2_CID_AUDIO_BASS: + /* PATH1_EQ_BASS_VOL */ + cx25840_and_or(client, 0x8d9, ~0x3f, + 48 - (ctrl->val * 48 / 0xffff)); + break; + case V4L2_CID_AUDIO_TREBLE: + /* PATH1_EQ_TREBLE_VOL */ + cx25840_and_or(client, 0x8db, ~0x3f, + 48 - (ctrl->val * 48 / 0xffff)); + break; + case V4L2_CID_AUDIO_BALANCE: + set_balance(client, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops = { + .s_ctrl = cx25840_audio_s_ctrl, +}; diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c new file mode 100644 index 00000000..12fb9b2e --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -0,0 +1,5340 @@ +/* cx25840 - Conexant CX25840 audio/video decoder driver + * + * Copyright (C) 2004 Ulf Eklund + * + * Based on the saa7115 driver and on the first version of Chris Kennedy's + * cx25840 driver. + * + * Changes by Tyler Trafford + * - cleanup/rewrite for V4L2 API (2005) + * + * VBI support by Hans Verkuil . + * + * NTSC sliced VBI support by Christopher Neufeld + * with additional fixes by Hans Verkuil . + * + * CX23885 support by Steven Toth . + * + * CX2388[578] IRQ handling, IO Pin mux configuration and other small fixes are + * Copyright (C) 2010 Andy Walls + * + * CX23888 DIF support for the HVR1850 + * Copyright (C) 2011 Steven Toth + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx25840-core.h" + +MODULE_DESCRIPTION("Conexant CX25840 audio/video decoder driver"); +MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford"); +MODULE_LICENSE("GPL"); + +#define CX25840_VID_INT_STAT_REG 0x410 +#define CX25840_VID_INT_STAT_BITS 0x0000ffff +#define CX25840_VID_INT_MASK_BITS 0xffff0000 +#define CX25840_VID_INT_MASK_SHFT 16 +#define CX25840_VID_INT_MASK_REG 0x412 + +#define CX23885_AUD_MC_INT_MASK_REG 0x80c +#define CX23885_AUD_MC_INT_STAT_BITS 0xffff0000 +#define CX23885_AUD_MC_INT_CTRL_BITS 0x0000ffff +#define CX23885_AUD_MC_INT_STAT_SHFT 16 + +#define CX25840_AUD_INT_CTRL_REG 0x812 +#define CX25840_AUD_INT_STAT_REG 0x813 + +#define CX23885_PIN_CTRL_IRQ_REG 0x123 +#define CX23885_PIN_CTRL_IRQ_IR_STAT 0x40 +#define CX23885_PIN_CTRL_IRQ_AUD_STAT 0x20 +#define CX23885_PIN_CTRL_IRQ_VID_STAT 0x10 + +#define CX25840_IR_STATS_REG 0x210 +#define CX25840_IR_IRQEN_REG 0x214 + +static int cx25840_debug; + +module_param_named(debug,cx25840_debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debugging messages [0=Off (default) 1=On]"); + + +/* ----------------------------------------------------------------------- */ +static void cx23888_std_setup(struct i2c_client *client); + +int cx25840_write(struct i2c_client *client, u16 addr, u8 value) +{ + u8 buffer[3]; + buffer[0] = addr >> 8; + buffer[1] = addr & 0xff; + buffer[2] = value; + return i2c_master_send(client, buffer, 3); +} + +int cx25840_write4(struct i2c_client *client, u16 addr, u32 value) +{ + u8 buffer[6]; + buffer[0] = addr >> 8; + buffer[1] = addr & 0xff; + buffer[2] = value & 0xff; + buffer[3] = (value >> 8) & 0xff; + buffer[4] = (value >> 16) & 0xff; + buffer[5] = value >> 24; + return i2c_master_send(client, buffer, 6); +} + +u8 cx25840_read(struct i2c_client * client, u16 addr) +{ + struct i2c_msg msgs[2]; + u8 tx_buf[2], rx_buf[1]; + + /* Write register address */ + tx_buf[0] = addr >> 8; + tx_buf[1] = addr & 0xff; + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = 2; + msgs[0].buf = (char *) tx_buf; + + /* Read data from register */ + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = 1; + msgs[1].buf = (char *) rx_buf; + + if (i2c_transfer(client->adapter, msgs, 2) < 2) + return 0; + + return rx_buf[0]; +} + +u32 cx25840_read4(struct i2c_client * client, u16 addr) +{ + struct i2c_msg msgs[2]; + u8 tx_buf[2], rx_buf[4]; + + /* Write register address */ + tx_buf[0] = addr >> 8; + tx_buf[1] = addr & 0xff; + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = 2; + msgs[0].buf = (char *) tx_buf; + + /* Read data from registers */ + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = 4; + msgs[1].buf = (char *) rx_buf; + + if (i2c_transfer(client->adapter, msgs, 2) < 2) + return 0; + + return (rx_buf[3] << 24) | (rx_buf[2] << 16) | (rx_buf[1] << 8) | + rx_buf[0]; +} + +int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask, + u8 or_value) +{ + return cx25840_write(client, addr, + (cx25840_read(client, addr) & and_mask) | + or_value); +} + +int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask, + u32 or_value) +{ + return cx25840_write4(client, addr, + (cx25840_read4(client, addr) & and_mask) | + or_value); +} + +/* ----------------------------------------------------------------------- */ + +static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input, + enum cx25840_audio_input aud_input); + +/* ----------------------------------------------------------------------- */ + +static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n, + struct v4l2_subdev_io_pin_config *p) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + u32 pin_ctrl; + u8 gpio_oe, gpio_data, strength; + + pin_ctrl = cx25840_read4(client, 0x120); + gpio_oe = cx25840_read(client, 0x160); + gpio_data = cx25840_read(client, 0x164); + + for (i = 0; i < n; i++) { + strength = p[i].strength; + if (strength > CX25840_PIN_DRIVE_FAST) + strength = CX25840_PIN_DRIVE_FAST; + + switch (p[i].pin) { + case CX23885_PIN_IRQ_N_GPIO16: + if (p[i].function != CX23885_PAD_IRQ_N) { + /* GPIO16 */ + pin_ctrl &= ~(0x1 << 25); + } else { + /* IRQ_N */ + if (p[i].flags & + (V4L2_SUBDEV_IO_PIN_DISABLE | + V4L2_SUBDEV_IO_PIN_INPUT)) { + pin_ctrl &= ~(0x1 << 25); + } else { + pin_ctrl |= (0x1 << 25); + } + if (p[i].flags & + V4L2_SUBDEV_IO_PIN_ACTIVE_LOW) { + pin_ctrl &= ~(0x1 << 24); + } else { + pin_ctrl |= (0x1 << 24); + } + } + break; + case CX23885_PIN_IR_RX_GPIO19: + if (p[i].function != CX23885_PAD_GPIO19) { + /* IR_RX */ + gpio_oe |= (0x1 << 0); + pin_ctrl &= ~(0x3 << 18); + pin_ctrl |= (strength << 18); + } else { + /* GPIO19 */ + gpio_oe &= ~(0x1 << 0); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 0); + gpio_data |= ((p[i].value & 0x1) << 0); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + case CX23885_PIN_IR_TX_GPIO20: + if (p[i].function != CX23885_PAD_GPIO20) { + /* IR_TX */ + gpio_oe |= (0x1 << 1); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_DISABLE) + pin_ctrl &= ~(0x1 << 10); + else + pin_ctrl |= (0x1 << 10); + pin_ctrl &= ~(0x3 << 18); + pin_ctrl |= (strength << 18); + } else { + /* GPIO20 */ + gpio_oe &= ~(0x1 << 1); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 1); + gpio_data |= ((p[i].value & 0x1) << 1); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + case CX23885_PIN_I2S_SDAT_GPIO21: + if (p[i].function != CX23885_PAD_GPIO21) { + /* I2S_SDAT */ + /* TODO: Input or Output config */ + gpio_oe |= (0x1 << 2); + pin_ctrl &= ~(0x3 << 22); + pin_ctrl |= (strength << 22); + } else { + /* GPIO21 */ + gpio_oe &= ~(0x1 << 2); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 2); + gpio_data |= ((p[i].value & 0x1) << 2); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + case CX23885_PIN_I2S_WCLK_GPIO22: + if (p[i].function != CX23885_PAD_GPIO22) { + /* I2S_WCLK */ + /* TODO: Input or Output config */ + gpio_oe |= (0x1 << 3); + pin_ctrl &= ~(0x3 << 22); + pin_ctrl |= (strength << 22); + } else { + /* GPIO22 */ + gpio_oe &= ~(0x1 << 3); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 3); + gpio_data |= ((p[i].value & 0x1) << 3); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + case CX23885_PIN_I2S_BCLK_GPIO23: + if (p[i].function != CX23885_PAD_GPIO23) { + /* I2S_BCLK */ + /* TODO: Input or Output config */ + gpio_oe |= (0x1 << 4); + pin_ctrl &= ~(0x3 << 22); + pin_ctrl |= (strength << 22); + } else { + /* GPIO23 */ + gpio_oe &= ~(0x1 << 4); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 4); + gpio_data |= ((p[i].value & 0x1) << 4); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + } + } + + cx25840_write(client, 0x164, gpio_data); + cx25840_write(client, 0x160, gpio_oe); + cx25840_write4(client, 0x120, pin_ctrl); + return 0; +} + +static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n, + struct v4l2_subdev_io_pin_config *pincfg) +{ + struct cx25840_state *state = to_state(sd); + + if (is_cx2388x(state)) + return cx23885_s_io_pin_config(sd, n, pincfg); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static void init_dll1(struct i2c_client *client) +{ + /* This is the Hauppauge sequence used to + * initialize the Delay Lock Loop 1 (ADC DLL). */ + cx25840_write(client, 0x159, 0x23); + cx25840_write(client, 0x15a, 0x87); + cx25840_write(client, 0x15b, 0x06); + udelay(10); + cx25840_write(client, 0x159, 0xe1); + udelay(10); + cx25840_write(client, 0x15a, 0x86); + cx25840_write(client, 0x159, 0xe0); + cx25840_write(client, 0x159, 0xe1); + cx25840_write(client, 0x15b, 0x10); +} + +static void init_dll2(struct i2c_client *client) +{ + /* This is the Hauppauge sequence used to + * initialize the Delay Lock Loop 2 (ADC DLL). */ + cx25840_write(client, 0x15d, 0xe3); + cx25840_write(client, 0x15e, 0x86); + cx25840_write(client, 0x15f, 0x06); + udelay(10); + cx25840_write(client, 0x15d, 0xe1); + cx25840_write(client, 0x15d, 0xe0); + cx25840_write(client, 0x15d, 0xe1); +} + +static void cx25836_initialize(struct i2c_client *client) +{ + /* reset configuration is described on page 3-77 of the CX25836 datasheet */ + /* 2. */ + cx25840_and_or(client, 0x000, ~0x01, 0x01); + cx25840_and_or(client, 0x000, ~0x01, 0x00); + /* 3a. */ + cx25840_and_or(client, 0x15a, ~0x70, 0x00); + /* 3b. */ + cx25840_and_or(client, 0x15b, ~0x1e, 0x06); + /* 3c. */ + cx25840_and_or(client, 0x159, ~0x02, 0x02); + /* 3d. */ + udelay(10); + /* 3e. */ + cx25840_and_or(client, 0x159, ~0x02, 0x00); + /* 3f. */ + cx25840_and_or(client, 0x159, ~0xc0, 0xc0); + /* 3g. */ + cx25840_and_or(client, 0x159, ~0x01, 0x00); + cx25840_and_or(client, 0x159, ~0x01, 0x01); + /* 3h. */ + cx25840_and_or(client, 0x15b, ~0x1e, 0x10); +} + +static void cx25840_work_handler(struct work_struct *work) +{ + struct cx25840_state *state = container_of(work, struct cx25840_state, fw_work); + cx25840_loadfw(state->c); + wake_up(&state->fw_wait); +} + +static void cx25840_initialize(struct i2c_client *client) +{ + DEFINE_WAIT(wait); + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + struct workqueue_struct *q; + + /* datasheet startup in numbered steps, refer to page 3-77 */ + /* 2. */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + /* The default of this register should be 4, but I get 0 instead. + * Set this register to 4 manually. */ + cx25840_write(client, 0x000, 0x04); + /* 3. */ + init_dll1(client); + init_dll2(client); + cx25840_write(client, 0x136, 0x0a); + /* 4. */ + cx25840_write(client, 0x13c, 0x01); + cx25840_write(client, 0x13c, 0x00); + /* 5. */ + /* Do the firmware load in a work handler to prevent. + Otherwise the kernel is blocked waiting for the + bit-banging i2c interface to finish uploading the + firmware. */ + INIT_WORK(&state->fw_work, cx25840_work_handler); + init_waitqueue_head(&state->fw_wait); + q = create_singlethread_workqueue("cx25840_fw"); + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + + /* 6. */ + cx25840_write(client, 0x115, 0x8c); + cx25840_write(client, 0x116, 0x07); + cx25840_write(client, 0x118, 0x02); + /* 7. */ + cx25840_write(client, 0x4a5, 0x80); + cx25840_write(client, 0x4a5, 0x00); + cx25840_write(client, 0x402, 0x00); + /* 8. */ + cx25840_and_or(client, 0x401, ~0x18, 0); + cx25840_and_or(client, 0x4a2, ~0x10, 0x10); + /* steps 8c and 8d are done in change_input() */ + /* 10. */ + cx25840_write(client, 0x8d3, 0x1f); + cx25840_write(client, 0x8e3, 0x03); + + cx25840_std_setup(client); + + /* trial and error says these are needed to get audio */ + cx25840_write(client, 0x914, 0xa0); + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + + /* stereo preferred */ + cx25840_write(client, 0x809, 0x04); + /* AC97 shift */ + cx25840_write(client, 0x8cf, 0x0f); + + /* (re)set input */ + set_input(client, state->vid_input, state->aud_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); +} + +static void cx23885_initialize(struct i2c_client *client) +{ + DEFINE_WAIT(wait); + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + struct workqueue_struct *q; + + /* + * Come out of digital power down + * The CX23888, at least, needs this, otherwise registers aside from + * 0x0-0x2 can't be read or written. + */ + cx25840_write(client, 0x000, 0); + + /* Internal Reset */ + cx25840_and_or(client, 0x102, ~0x01, 0x01); + cx25840_and_or(client, 0x102, ~0x01, 0x00); + + /* Stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + + /* DIF in reset? */ + cx25840_write(client, 0x398, 0); + + /* + * Trust the default xtal, no division + * '885: 28.636363... MHz + * '887: 25.000000 MHz + * '888: 50.000000 MHz + */ + cx25840_write(client, 0x2, 0x76); + + /* Power up all the PLL's and DLL */ + cx25840_write(client, 0x1, 0x40); + + /* Sys PLL */ + switch (state->id) { + case V4L2_IDENT_CX23888_AV: + /* + * 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz + * 572.73 MHz before post divide + */ + /* HVR1850 or 50MHz xtal */ + cx25840_write(client, 0x2, 0x71); + cx25840_write4(client, 0x11c, 0x01d1744c); + cx25840_write4(client, 0x118, 0x00000416); + cx25840_write4(client, 0x404, 0x0010253e); + cx25840_write4(client, 0x42c, 0x42600000); + cx25840_write4(client, 0x44c, 0x161f1000); + break; + case V4L2_IDENT_CX23887_AV: + /* + * 25.0 MHz * (0x16 + 0x1d1744c/0x2000000)/4 = 5 * 28.636363 MHz + * 572.73 MHz before post divide + */ + cx25840_write4(client, 0x11c, 0x01d1744c); + cx25840_write4(client, 0x118, 0x00000416); + break; + case V4L2_IDENT_CX23885_AV: + default: + /* + * 28.636363 MHz * (0x14 + 0x0/0x2000000)/4 = 5 * 28.636363 MHz + * 572.73 MHz before post divide + */ + cx25840_write4(client, 0x11c, 0x00000000); + cx25840_write4(client, 0x118, 0x00000414); + break; + } + + /* Disable DIF bypass */ + cx25840_write4(client, 0x33c, 0x00000001); + + /* DIF Src phase inc */ + cx25840_write4(client, 0x340, 0x0df7df83); + + /* + * Vid PLL + * Setup for a BT.656 pixel clock of 13.5 Mpixels/second + * + * 28.636363 MHz * (0xf + 0x02be2c9/0x2000000)/4 = 8 * 13.5 MHz + * 432.0 MHz before post divide + */ + + /* HVR1850 */ + switch (state->id) { + case V4L2_IDENT_CX23888_AV: + /* 888/HVR1250 specific */ + cx25840_write4(client, 0x10c, 0x13333333); + cx25840_write4(client, 0x108, 0x00000515); + break; + default: + cx25840_write4(client, 0x10c, 0x002be2c9); + cx25840_write4(client, 0x108, 0x0000040f); + } + + /* Luma */ + cx25840_write4(client, 0x414, 0x00107d12); + + /* Chroma */ + cx25840_write4(client, 0x420, 0x3d008282); + + /* + * Aux PLL + * Initial setup for audio sample clock: + * 48 ksps, 16 bits/sample, x160 multiplier = 122.88 MHz + * Initial I2S output/master clock(?): + * 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz + */ + switch (state->id) { + case V4L2_IDENT_CX23888_AV: + /* + * 50.0 MHz * (0x7 + 0x0bedfa4/0x2000000)/3 = 122.88 MHz + * 368.64 MHz before post divide + * 122.88 MHz / 0xa = 12.288 MHz + */ + /* HVR1850 or 50MHz xtal */ + cx25840_write4(client, 0x114, 0x017dbf48); + cx25840_write4(client, 0x110, 0x000a030e); + break; + case V4L2_IDENT_CX23887_AV: + /* + * 25.0 MHz * (0xe + 0x17dbf48/0x2000000)/3 = 122.88 MHz + * 368.64 MHz before post divide + * 122.88 MHz / 0xa = 12.288 MHz + */ + cx25840_write4(client, 0x114, 0x017dbf48); + cx25840_write4(client, 0x110, 0x000a030e); + break; + case V4L2_IDENT_CX23885_AV: + default: + /* + * 28.636363 MHz * (0xc + 0x1bf0c9e/0x2000000)/3 = 122.88 MHz + * 368.64 MHz before post divide + * 122.88 MHz / 0xa = 12.288 MHz + */ + cx25840_write4(client, 0x114, 0x01bf0c9e); + cx25840_write4(client, 0x110, 0x000a030c); + break; + } + + /* ADC2 input select */ + cx25840_write(client, 0x102, 0x10); + + /* VIN1 & VIN5 */ + cx25840_write(client, 0x103, 0x11); + + /* Enable format auto detect */ + cx25840_write(client, 0x400, 0); + /* Fast subchroma lock */ + /* White crush, Chroma AGC & Chroma Killer enabled */ + cx25840_write(client, 0x401, 0xe8); + + /* Select AFE clock pad output source */ + cx25840_write(client, 0x144, 0x05); + + /* Drive GPIO2 direction and values for HVR1700 + * where an onboard mux selects the output of demodulator + * vs the 417. Failure to set this results in no DTV. + * It's safe to set this across all Hauppauge boards + * currently, regardless of the board type. + */ + cx25840_write(client, 0x160, 0x1d); + cx25840_write(client, 0x164, 0x00); + + /* Do the firmware load in a work handler to prevent. + Otherwise the kernel is blocked waiting for the + bit-banging i2c interface to finish uploading the + firmware. */ + INIT_WORK(&state->fw_work, cx25840_work_handler); + init_waitqueue_head(&state->fw_wait); + q = create_singlethread_workqueue("cx25840_fw"); + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + + /* Call the cx23888 specific std setup func, we no longer rely on + * the generic cx24840 func. + */ + if (is_cx23888(state)) + cx23888_std_setup(client); + else + cx25840_std_setup(client); + + /* (re)set input */ + set_input(client, state->vid_input, state->aud_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + + /* Disable and clear video interrupts - we don't use them */ + cx25840_write4(client, CX25840_VID_INT_STAT_REG, 0xffffffff); + + /* Disable and clear audio interrupts - we don't use them */ + cx25840_write(client, CX25840_AUD_INT_CTRL_REG, 0xff); + cx25840_write(client, CX25840_AUD_INT_STAT_REG, 0xff); + + /* CC raw enable */ + /* - VIP 1.1 control codes - 10bit, blue field enable. + * - enable raw data during vertical blanking. + * - enable ancillary Data insertion for 656 or VIP. + */ + cx25840_write4(client, 0x404, 0x0010253e); + + /* CC on - Undocumented Register */ + cx25840_write(client, 0x42f, 0x66); + + /* HVR-1250 / HVR1850 DIF related */ + /* Power everything up */ + cx25840_write4(client, 0x130, 0x0); + + /* Undocumented */ + cx25840_write4(client, 0x478, 0x6628021F); + + /* AFE_CLK_OUT_CTRL - Select the clock output source as output */ + cx25840_write4(client, 0x144, 0x5); + + /* I2C_OUT_CTL - I2S output configuration as + * Master, Sony, Left justified, left sample on WS=1 + */ + cx25840_write4(client, 0x918, 0x1a0); + + /* AFE_DIAG_CTRL1 */ + cx25840_write4(client, 0x134, 0x000a1800); + + /* AFE_DIAG_CTRL3 - Inverted Polarity for Audio and Video */ + cx25840_write4(client, 0x13c, 0x00310000); +} + +/* ----------------------------------------------------------------------- */ + +static void cx231xx_initialize(struct i2c_client *client) +{ + DEFINE_WAIT(wait); + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + struct workqueue_struct *q; + + /* Internal Reset */ + cx25840_and_or(client, 0x102, ~0x01, 0x01); + cx25840_and_or(client, 0x102, ~0x01, 0x00); + + /* Stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + + /* DIF in reset? */ + cx25840_write(client, 0x398, 0); + + /* Trust the default xtal, no division */ + /* This changes for the cx23888 products */ + cx25840_write(client, 0x2, 0x76); + + /* Bring down the regulator for AUX clk */ + cx25840_write(client, 0x1, 0x40); + + /* Disable DIF bypass */ + cx25840_write4(client, 0x33c, 0x00000001); + + /* DIF Src phase inc */ + cx25840_write4(client, 0x340, 0x0df7df83); + + /* Luma */ + cx25840_write4(client, 0x414, 0x00107d12); + + /* Chroma */ + cx25840_write4(client, 0x420, 0x3d008282); + + /* ADC2 input select */ + cx25840_write(client, 0x102, 0x10); + + /* VIN1 & VIN5 */ + cx25840_write(client, 0x103, 0x11); + + /* Enable format auto detect */ + cx25840_write(client, 0x400, 0); + /* Fast subchroma lock */ + /* White crush, Chroma AGC & Chroma Killer enabled */ + cx25840_write(client, 0x401, 0xe8); + + /* Do the firmware load in a work handler to prevent. + Otherwise the kernel is blocked waiting for the + bit-banging i2c interface to finish uploading the + firmware. */ + INIT_WORK(&state->fw_work, cx25840_work_handler); + init_waitqueue_head(&state->fw_wait); + q = create_singlethread_workqueue("cx25840_fw"); + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + + cx25840_std_setup(client); + + /* (re)set input */ + set_input(client, state->vid_input, state->aud_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + + /* CC raw enable */ + cx25840_write(client, 0x404, 0x0b); + + /* CC on */ + cx25840_write(client, 0x42f, 0x66); + cx25840_write4(client, 0x474, 0x1e1e601a); +} + +/* ----------------------------------------------------------------------- */ + +void cx25840_std_setup(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + v4l2_std_id std = state->std; + int hblank, hactive, burst, vblank, vactive, sc; + int vblank656, src_decimation; + int luma_lpf, uv_lpf, comb; + u32 pll_int, pll_frac, pll_post; + + /* datasheet startup, step 8d */ + if (std & ~V4L2_STD_NTSC) + cx25840_write(client, 0x49f, 0x11); + else + cx25840_write(client, 0x49f, 0x14); + + if (std & V4L2_STD_625_50) { + hblank = 132; + hactive = 720; + burst = 93; + vblank = 36; + vactive = 580; + vblank656 = 40; + src_decimation = 0x21f; + luma_lpf = 2; + + if (std & V4L2_STD_SECAM) { + uv_lpf = 0; + comb = 0; + sc = 0x0a425f; + } else if (std == V4L2_STD_PAL_Nc) { + uv_lpf = 1; + comb = 0x20; + sc = 556453; + } else { + uv_lpf = 1; + comb = 0x20; + sc = 688739; + } + } else { + hactive = 720; + hblank = 122; + vactive = 487; + luma_lpf = 1; + uv_lpf = 1; + + src_decimation = 0x21f; + if (std == V4L2_STD_PAL_60) { + vblank = 26; + vblank656 = 26; + burst = 0x5b; + luma_lpf = 2; + comb = 0x20; + sc = 688739; + } else if (std == V4L2_STD_PAL_M) { + vblank = 20; + vblank656 = 24; + burst = 0x61; + comb = 0x20; + sc = 555452; + } else { + vblank = 26; + vblank656 = 26; + burst = 0x5b; + comb = 0x66; + sc = 556063; + } + } + + /* DEBUG: Displays configured PLL frequency */ + if (!is_cx231xx(state)) { + pll_int = cx25840_read(client, 0x108); + pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff; + pll_post = cx25840_read(client, 0x109); + v4l_dbg(1, cx25840_debug, client, + "PLL regs = int: %u, frac: %u, post: %u\n", + pll_int, pll_frac, pll_post); + + if (pll_post) { + int fin, fsc; + int pll = (28636363L * ((((u64)pll_int) << 25L) + pll_frac)) >> 25L; + + pll /= pll_post; + v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n", + pll / 1000000, pll % 1000000); + v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n", + pll / 8000000, (pll / 8) % 1000000); + + fin = ((u64)src_decimation * pll) >> 12; + v4l_dbg(1, cx25840_debug, client, + "ADC Sampling freq = %d.%06d MHz\n", + fin / 1000000, fin % 1000000); + + fsc = (((u64)sc) * pll) >> 24L; + v4l_dbg(1, cx25840_debug, client, + "Chroma sub-carrier freq = %d.%06d MHz\n", + fsc / 1000000, fsc % 1000000); + + v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, " + "vblank %i, vactive %i, vblank656 %i, src_dec %i, " + "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, " + "sc 0x%06x\n", + hblank, hactive, vblank, vactive, vblank656, + src_decimation, burst, luma_lpf, uv_lpf, comb, sc); + } + } + + /* Sets horizontal blanking delay and active lines */ + cx25840_write(client, 0x470, hblank); + cx25840_write(client, 0x471, + 0xff & (((hblank >> 8) & 0x3) | (hactive << 4))); + cx25840_write(client, 0x472, hactive >> 4); + + /* Sets burst gate delay */ + cx25840_write(client, 0x473, burst); + + /* Sets vertical blanking delay and active duration */ + cx25840_write(client, 0x474, vblank); + cx25840_write(client, 0x475, + 0xff & (((vblank >> 8) & 0x3) | (vactive << 4))); + cx25840_write(client, 0x476, vactive >> 4); + cx25840_write(client, 0x477, vblank656); + + /* Sets src decimation rate */ + cx25840_write(client, 0x478, 0xff & src_decimation); + cx25840_write(client, 0x479, 0xff & (src_decimation >> 8)); + + /* Sets Luma and UV Low pass filters */ + cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30)); + + /* Enables comb filters */ + cx25840_write(client, 0x47b, comb); + + /* Sets SC Step*/ + cx25840_write(client, 0x47c, sc); + cx25840_write(client, 0x47d, 0xff & sc >> 8); + cx25840_write(client, 0x47e, 0xff & sc >> 16); + + /* Sets VBI parameters */ + if (std & V4L2_STD_625_50) { + cx25840_write(client, 0x47f, 0x01); + state->vbi_line_offset = 5; + } else { + cx25840_write(client, 0x47f, 0x00); + state->vbi_line_offset = 8; + } +} + +/* ----------------------------------------------------------------------- */ + +static void input_change(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + v4l2_std_id std = state->std; + + /* Follow step 8c and 8d of section 3.16 in the cx25840 datasheet */ + if (std & V4L2_STD_SECAM) { + cx25840_write(client, 0x402, 0); + } + else { + cx25840_write(client, 0x402, 0x04); + cx25840_write(client, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); + } + cx25840_and_or(client, 0x401, ~0x60, 0); + cx25840_and_or(client, 0x401, ~0x60, 0x60); + + /* Don't write into audio registers on cx2583x chips */ + if (is_cx2583x(state)) + return; + + cx25840_and_or(client, 0x810, ~0x01, 1); + + if (state->radio) { + cx25840_write(client, 0x808, 0xf9); + cx25840_write(client, 0x80b, 0x00); + } + else if (std & V4L2_STD_525_60) { + /* Certain Hauppauge PVR150 models have a hardware bug + that causes audio to drop out. For these models the + audio standard must be set explicitly. + To be precise: it affects cards with tuner models + 85, 99 and 112 (model numbers from tveeprom). */ + int hw_fix = state->pvr150_workaround; + + if (std == V4L2_STD_NTSC_M_JP) { + /* Japan uses EIAJ audio standard */ + cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7); + } else if (std == V4L2_STD_NTSC_M_KR) { + /* South Korea uses A2 audio standard */ + cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8); + } else { + /* Others use the BTSC audio standard */ + cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6); + } + cx25840_write(client, 0x80b, 0x00); + } else if (std & V4L2_STD_PAL) { + /* Autodetect audio standard and audio system */ + cx25840_write(client, 0x808, 0xff); + /* Since system PAL-L is pretty much non-existent and + not used by any public broadcast network, force + 6.5 MHz carrier to be interpreted as System DK, + this avoids DK audio detection instability */ + cx25840_write(client, 0x80b, 0x00); + } else if (std & V4L2_STD_SECAM) { + /* Autodetect audio standard and audio system */ + cx25840_write(client, 0x808, 0xff); + /* If only one of SECAM-DK / SECAM-L is required, then force + 6.5MHz carrier, else autodetect it */ + if ((std & V4L2_STD_SECAM_DK) && + !(std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) { + /* 6.5 MHz carrier to be interpreted as System DK */ + cx25840_write(client, 0x80b, 0x00); + } else if (!(std & V4L2_STD_SECAM_DK) && + (std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) { + /* 6.5 MHz carrier to be interpreted as System L */ + cx25840_write(client, 0x80b, 0x08); + } else { + /* 6.5 MHz carrier to be autodetected */ + cx25840_write(client, 0x80b, 0x10); + } + } + + cx25840_and_or(client, 0x810, ~0x01, 0); +} + +static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input, + enum cx25840_audio_input aud_input) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u8 is_composite = (vid_input >= CX25840_COMPOSITE1 && + vid_input <= CX25840_COMPOSITE8); + u8 is_component = (vid_input & CX25840_COMPONENT_ON) == + CX25840_COMPONENT_ON; + u8 is_dif = (vid_input & CX25840_DIF_ON) == + CX25840_DIF_ON; + u8 is_svideo = (vid_input & CX25840_SVIDEO_ON) == + CX25840_SVIDEO_ON; + int luma = vid_input & 0xf0; + int chroma = vid_input & 0xf00; + u8 reg; + u32 val; + + v4l_dbg(1, cx25840_debug, client, + "decoder set video input %d, audio input %d\n", + vid_input, aud_input); + + if (vid_input >= CX25840_VIN1_CH1) { + v4l_dbg(1, cx25840_debug, client, "vid_input 0x%x\n", + vid_input); + reg = vid_input & 0xff; + is_composite = !is_component && + ((vid_input & CX25840_SVIDEO_ON) != CX25840_SVIDEO_ON); + + v4l_dbg(1, cx25840_debug, client, "mux cfg 0x%x comp=%d\n", + reg, is_composite); + } else if (is_composite) { + reg = 0xf0 + (vid_input - CX25840_COMPOSITE1); + } else { + if ((vid_input & ~0xff0) || + luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 || + chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) { + v4l_err(client, "0x%04x is not a valid video input!\n", + vid_input); + return -EINVAL; + } + reg = 0xf0 + ((luma - CX25840_SVIDEO_LUMA1) >> 4); + if (chroma >= CX25840_SVIDEO_CHROMA7) { + reg &= 0x3f; + reg |= (chroma - CX25840_SVIDEO_CHROMA7) >> 2; + } else { + reg &= 0xcf; + reg |= (chroma - CX25840_SVIDEO_CHROMA4) >> 4; + } + } + + /* The caller has previously prepared the correct routing + * configuration in reg (for the cx23885) so we have no + * need to attempt to flip bits for earlier av decoders. + */ + if (!is_cx2388x(state) && !is_cx231xx(state)) { + switch (aud_input) { + case CX25840_AUDIO_SERIAL: + /* do nothing, use serial audio input */ + break; + case CX25840_AUDIO4: reg &= ~0x30; break; + case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break; + case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break; + case CX25840_AUDIO7: reg &= ~0xc0; break; + case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break; + + default: + v4l_err(client, "0x%04x is not a valid audio input!\n", + aud_input); + return -EINVAL; + } + } + + cx25840_write(client, 0x103, reg); + + /* Set INPUT_MODE to Composite, S-Video or Component */ + if (is_component) + cx25840_and_or(client, 0x401, ~0x6, 0x6); + else + cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02); + + if (is_cx2388x(state)) { + + /* Enable or disable the DIF for tuner use */ + if (is_dif) { + cx25840_and_or(client, 0x102, ~0x80, 0x80); + + /* Set of defaults for NTSC and PAL */ + cx25840_write4(client, 0x31c, 0xc2262600); + cx25840_write4(client, 0x320, 0xc2262600); + + /* 18271 IF - Nobody else yet uses a different + * tuner with the DIF, so these are reasonable + * assumptions (HVR1250 and HVR1850 specific). + */ + cx25840_write4(client, 0x318, 0xda262600); + cx25840_write4(client, 0x33c, 0x2a24c800); + cx25840_write4(client, 0x104, 0x0704dd00); + } else { + cx25840_write4(client, 0x300, 0x015c28f5); + + cx25840_and_or(client, 0x102, ~0x80, 0); + cx25840_write4(client, 0x340, 0xdf7df83); + cx25840_write4(client, 0x104, 0x0704dd80); + cx25840_write4(client, 0x314, 0x22400600); + cx25840_write4(client, 0x318, 0x40002600); + cx25840_write4(client, 0x324, 0x40002600); + cx25840_write4(client, 0x32c, 0x0250e620); + cx25840_write4(client, 0x39c, 0x01FF0B00); + + cx25840_write4(client, 0x410, 0xffff0dbf); + cx25840_write4(client, 0x414, 0x00137d03); + + /* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is + CHROMA_CTRL */ + if (is_cx23888(state)) + cx25840_write4(client, 0x418, 0x01008080); + else + cx25840_write4(client, 0x418, 0x01000000); + + cx25840_write4(client, 0x41c, 0x00000000); + + /* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is + CRUSH_CTRL */ + if (is_cx23888(state)) + cx25840_write4(client, 0x420, 0x001c3e0f); + else + cx25840_write4(client, 0x420, 0x001c8282); + + cx25840_write4(client, 0x42c, 0x42600000); + cx25840_write4(client, 0x430, 0x0000039b); + cx25840_write4(client, 0x438, 0x00000000); + + cx25840_write4(client, 0x440, 0xF8E3E824); + cx25840_write4(client, 0x444, 0x401040dc); + cx25840_write4(client, 0x448, 0xcd3f02a0); + cx25840_write4(client, 0x44c, 0x161f1000); + cx25840_write4(client, 0x450, 0x00000802); + + cx25840_write4(client, 0x91c, 0x01000000); + cx25840_write4(client, 0x8e0, 0x03063870); + cx25840_write4(client, 0x8d4, 0x7FFF0024); + cx25840_write4(client, 0x8d0, 0x00063073); + + cx25840_write4(client, 0x8c8, 0x00010000); + cx25840_write4(client, 0x8cc, 0x00080023); + + /* DIF BYPASS */ + cx25840_write4(client, 0x33c, 0x2a04c800); + } + + /* Reset the DIF */ + cx25840_write4(client, 0x398, 0); + } + + if (!is_cx2388x(state) && !is_cx231xx(state)) { + /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ + cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); + /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */ + if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) + cx25840_and_or(client, 0x102, ~0x4, 4); + else + cx25840_and_or(client, 0x102, ~0x4, 0); + } else { + /* Set DUAL_MODE_ADC2 to 1 if component*/ + cx25840_and_or(client, 0x102, ~0x4, is_component ? 0x4 : 0x0); + if (is_composite) { + /* ADC2 input select channel 2 */ + cx25840_and_or(client, 0x102, ~0x2, 0); + } else if (!is_component) { + /* S-Video */ + if (chroma >= CX25840_SVIDEO_CHROMA7) { + /* ADC2 input select channel 3 */ + cx25840_and_or(client, 0x102, ~0x2, 2); + } else { + /* ADC2 input select channel 2 */ + cx25840_and_or(client, 0x102, ~0x2, 0); + } + } + + /* cx23885 / SVIDEO */ + if (is_cx2388x(state) && is_svideo) { +#define AFE_CTRL (0x104) +#define MODE_CTRL (0x400) + cx25840_and_or(client, 0x102, ~0x2, 0x2); + + val = cx25840_read4(client, MODE_CTRL); + val &= 0xFFFFF9FF; + + /* YC */ + val |= 0x00000200; + val &= ~0x2000; + cx25840_write4(client, MODE_CTRL, val); + + val = cx25840_read4(client, AFE_CTRL); + + /* Chroma in select */ + val |= 0x00001000; + val &= 0xfffffe7f; + /* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8). + * This sets them to use video rather than audio. + * Only one of the two will be in use. + */ + cx25840_write4(client, AFE_CTRL, val); + } else + cx25840_and_or(client, 0x102, ~0x2, 0); + } + + state->vid_input = vid_input; + state->aud_input = aud_input; + cx25840_audio_set_path(client); + input_change(client); + + if (is_cx2388x(state)) { + /* Audio channel 1 src : Parallel 1 */ + cx25840_write(client, 0x124, 0x03); + + /* Select AFE clock pad output source */ + cx25840_write(client, 0x144, 0x05); + + /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */ + cx25840_write(client, 0x914, 0xa0); + + /* I2S_OUT_CTL: + * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 + * I2S_OUT_MASTER_MODE = Master + */ + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + } else if (is_cx231xx(state)) { + /* Audio channel 1 src : Parallel 1 */ + cx25840_write(client, 0x124, 0x03); + + /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */ + cx25840_write(client, 0x914, 0xa0); + + /* I2S_OUT_CTL: + * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 + * I2S_OUT_MASTER_MODE = Master + */ + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + } + + if (is_cx2388x(state) && ((aud_input == CX25840_AUDIO7) || + (aud_input == CX25840_AUDIO6))) { + /* Configure audio from LR1 or LR2 input */ + cx25840_write4(client, 0x910, 0); + cx25840_write4(client, 0x8d0, 0x63073); + } else + if (is_cx2388x(state) && (aud_input == CX25840_AUDIO8)) { + /* Configure audio from tuner/sif input */ + cx25840_write4(client, 0x910, 0x12b000c9); + cx25840_write4(client, 0x8d0, 0x1f063870); + } + + if (is_cx23888(state)) { + /* HVR1850 */ + /* AUD_IO_CTRL - I2S Input, Parallel1*/ + /* - Channel 1 src - Parallel1 (Merlin out) */ + /* - Channel 2 src - Parallel2 (Merlin out) */ + /* - Channel 3 src - Parallel3 (Merlin AC97 out) */ + /* - I2S source and dir - Merlin, output */ + cx25840_write4(client, 0x124, 0x100); + + if (!is_dif) { + /* Stop microcontroller if we don't need it + * to avoid audio popping on svideo/composite use. + */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + } + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int set_v4lstd(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u8 fmt = 0; /* zero is autodetect */ + u8 pal_m = 0; + + /* First tests should be against specific std */ + if (state->std == V4L2_STD_NTSC_M_JP) { + fmt = 0x2; + } else if (state->std == V4L2_STD_NTSC_443) { + fmt = 0x3; + } else if (state->std == V4L2_STD_PAL_M) { + pal_m = 1; + fmt = 0x5; + } else if (state->std == V4L2_STD_PAL_N) { + fmt = 0x6; + } else if (state->std == V4L2_STD_PAL_Nc) { + fmt = 0x7; + } else if (state->std == V4L2_STD_PAL_60) { + fmt = 0x8; + } else { + /* Then, test against generic ones */ + if (state->std & V4L2_STD_NTSC) + fmt = 0x1; + else if (state->std & V4L2_STD_PAL) + fmt = 0x4; + else if (state->std & V4L2_STD_SECAM) + fmt = 0xc; + } + + v4l_dbg(1, cx25840_debug, client, "changing video std to fmt %i\n",fmt); + + /* Follow step 9 of section 3.16 in the cx25840 datasheet. + Without this PAL may display a vertical ghosting effect. + This happens for example with the Yuan MPC622. */ + if (fmt >= 4 && fmt < 8) { + /* Set format to NTSC-M */ + cx25840_and_or(client, 0x400, ~0xf, 1); + /* Turn off LCOMB */ + cx25840_and_or(client, 0x47b, ~6, 0); + } + cx25840_and_or(client, 0x400, ~0xf, fmt); + cx25840_and_or(client, 0x403, ~0x3, pal_m); + if (is_cx23888(state)) + cx23888_std_setup(client); + else + cx25840_std_setup(client); + if (!is_cx2583x(state)) + input_change(client); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + cx25840_write(client, 0x414, ctrl->val - 128); + break; + + case V4L2_CID_CONTRAST: + cx25840_write(client, 0x415, ctrl->val << 1); + break; + + case V4L2_CID_SATURATION: + if (is_cx23888(state)) { + cx25840_write(client, 0x418, ctrl->val << 1); + cx25840_write(client, 0x419, ctrl->val << 1); + } else { + cx25840_write(client, 0x420, ctrl->val << 1); + cx25840_write(client, 0x421, ctrl->val << 1); + } + break; + + case V4L2_CID_HUE: + if (is_cx23888(state)) + cx25840_write(client, 0x41a, ctrl->val); + else + cx25840_write(client, 0x422, ctrl->val); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int HSC, VSC, Vsrc, Hsrc, filter, Vlines; + int is_50Hz = !(state->std & V4L2_STD_525_60); + + if (fmt->code != V4L2_MBUS_FMT_FIXED) + return -EINVAL; + + fmt->field = V4L2_FIELD_INTERLACED; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + + if (is_cx23888(state)) { + Vsrc = (cx25840_read(client, 0x42a) & 0x3f) << 4; + Vsrc |= (cx25840_read(client, 0x429) & 0xf0) >> 4; + } else { + Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4; + Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4; + } + + if (is_cx23888(state)) { + Hsrc = (cx25840_read(client, 0x426) & 0x3f) << 4; + Hsrc |= (cx25840_read(client, 0x425) & 0xf0) >> 4; + } else { + Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4; + Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4; + } + + Vlines = fmt->height + (is_50Hz ? 4 : 7); + + if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) || + (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) { + v4l_err(client, "%dx%d is not a valid size!\n", + fmt->width, fmt->height); + return -ERANGE; + } + + HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20); + VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); + VSC &= 0x1fff; + + if (fmt->width >= 385) + filter = 0; + else if (fmt->width > 192) + filter = 1; + else if (fmt->width > 96) + filter = 2; + else + filter = 3; + + v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale %ux%u\n", + fmt->width, fmt->height, HSC, VSC); + + /* HSCALE=HSC */ + cx25840_write(client, 0x418, HSC & 0xff); + cx25840_write(client, 0x419, (HSC >> 8) & 0xff); + cx25840_write(client, 0x41a, HSC >> 16); + /* VSCALE=VSC */ + cx25840_write(client, 0x41c, VSC & 0xff); + cx25840_write(client, 0x41d, VSC >> 8); + /* VS_INTRLACE=1 VFILT=filter */ + cx25840_write(client, 0x41e, 0x8 | filter); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static void log_video_status(struct i2c_client *client) +{ + static const char *const fmt_strs[] = { + "0x0", + "NTSC-M", "NTSC-J", "NTSC-4.43", + "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60", + "0x9", "0xA", "0xB", + "SECAM", + "0xD", "0xE", "0xF" + }; + + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u8 vidfmt_sel = cx25840_read(client, 0x400) & 0xf; + u8 gen_stat1 = cx25840_read(client, 0x40d); + u8 gen_stat2 = cx25840_read(client, 0x40e); + int vid_input = state->vid_input; + + v4l_info(client, "Video signal: %spresent\n", + (gen_stat2 & 0x20) ? "" : "not "); + v4l_info(client, "Detected format: %s\n", + fmt_strs[gen_stat1 & 0xf]); + + v4l_info(client, "Specified standard: %s\n", + vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection"); + + if (vid_input >= CX25840_COMPOSITE1 && + vid_input <= CX25840_COMPOSITE8) { + v4l_info(client, "Specified video input: Composite %d\n", + vid_input - CX25840_COMPOSITE1 + 1); + } else { + v4l_info(client, "Specified video input: S-Video (Luma In%d, Chroma In%d)\n", + (vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8); + } + + v4l_info(client, "Specified audioclock freq: %d Hz\n", state->audclk_freq); +} + +/* ----------------------------------------------------------------------- */ + +static void log_audio_status(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u8 download_ctl = cx25840_read(client, 0x803); + u8 mod_det_stat0 = cx25840_read(client, 0x804); + u8 mod_det_stat1 = cx25840_read(client, 0x805); + u8 audio_config = cx25840_read(client, 0x808); + u8 pref_mode = cx25840_read(client, 0x809); + u8 afc0 = cx25840_read(client, 0x80b); + u8 mute_ctl = cx25840_read(client, 0x8d3); + int aud_input = state->aud_input; + char *p; + + switch (mod_det_stat0) { + case 0x00: p = "mono"; break; + case 0x01: p = "stereo"; break; + case 0x02: p = "dual"; break; + case 0x04: p = "tri"; break; + case 0x10: p = "mono with SAP"; break; + case 0x11: p = "stereo with SAP"; break; + case 0x12: p = "dual with SAP"; break; + case 0x14: p = "tri with SAP"; break; + case 0xfe: p = "forced mode"; break; + default: p = "not defined"; + } + v4l_info(client, "Detected audio mode: %s\n", p); + + switch (mod_det_stat1) { + case 0x00: p = "not defined"; break; + case 0x01: p = "EIAJ"; break; + case 0x02: p = "A2-M"; break; + case 0x03: p = "A2-BG"; break; + case 0x04: p = "A2-DK1"; break; + case 0x05: p = "A2-DK2"; break; + case 0x06: p = "A2-DK3"; break; + case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x08: p = "AM-L"; break; + case 0x09: p = "NICAM-BG"; break; + case 0x0a: p = "NICAM-DK"; break; + case 0x0b: p = "NICAM-I"; break; + case 0x0c: p = "NICAM-L"; break; + case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "high-deviation FM"; break; + case 0x11: p = "very high-deviation FM"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; + case 0xff: p = "no detected audio standard"; break; + default: p = "not defined"; + } + v4l_info(client, "Detected audio standard: %s\n", p); + v4l_info(client, "Audio microcontroller: %s\n", + (download_ctl & 0x10) ? + ((mute_ctl & 0x2) ? "detecting" : "running") : "stopped"); + + switch (audio_config >> 4) { + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; + case 0x0f: p = "automatic detection"; break; + default: p = "undefined"; + } + v4l_info(client, "Configured audio standard: %s\n", p); + + if ((audio_config >> 4) < 0xF) { + switch (audio_config & 0xF) { + case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break; + case 0x01: p = "MONO2 (LANGUAGE B)"; break; + case 0x02: p = "MONO3 (STEREO forced MONO)"; break; + case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; + case 0x04: p = "STEREO"; break; + case 0x05: p = "DUAL1 (AB)"; break; + case 0x06: p = "DUAL2 (AC) (FM)"; break; + case 0x07: p = "DUAL3 (BC) (FM)"; break; + case 0x08: p = "DUAL4 (AC) (AM)"; break; + case 0x09: p = "DUAL5 (BC) (AM)"; break; + case 0x0a: p = "SAP"; break; + default: p = "undefined"; + } + v4l_info(client, "Configured audio mode: %s\n", p); + } else { + switch (audio_config & 0xF) { + case 0x00: p = "BG"; break; + case 0x01: p = "DK1"; break; + case 0x02: p = "DK2"; break; + case 0x03: p = "DK3"; break; + case 0x04: p = "I"; break; + case 0x05: p = "L"; break; + case 0x06: p = "BTSC"; break; + case 0x07: p = "EIAJ"; break; + case 0x08: p = "A2-M"; break; + case 0x09: p = "FM Radio"; break; + case 0x0f: p = "automatic standard and mode detection"; break; + default: p = "undefined"; + } + v4l_info(client, "Configured audio system: %s\n", p); + } + + if (aud_input) { + v4l_info(client, "Specified audio input: Tuner (In%d)\n", aud_input); + } else { + v4l_info(client, "Specified audio input: External\n"); + } + + switch (pref_mode & 0xf) { + case 0: p = "mono/language A"; break; + case 1: p = "language B"; break; + case 2: p = "language C"; break; + case 3: p = "analog fallback"; break; + case 4: p = "stereo"; break; + case 5: p = "language AC"; break; + case 6: p = "language BC"; break; + case 7: p = "language AB"; break; + default: p = "undefined"; + } + v4l_info(client, "Preferred audio mode: %s\n", p); + + if ((audio_config & 0xf) == 0xf) { + switch ((afc0 >> 3) & 0x3) { + case 0: p = "system DK"; break; + case 1: p = "system L"; break; + case 2: p = "autodetect"; break; + default: p = "undefined"; + } + v4l_info(client, "Selected 65 MHz format: %s\n", p); + + switch (afc0 & 0x7) { + case 0: p = "chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; + } + v4l_info(client, "Selected 45 MHz format: %s\n", p); + } +} + +/* ----------------------------------------------------------------------- */ + +/* This load_fw operation must be called to load the driver's firmware. + Without this the audio standard detection will fail and you will + only get mono. + + Since loading the firmware is often problematic when the driver is + compiled into the kernel I recommend postponing calling this function + until the first open of the video device. Another reason for + postponing it is that loading this firmware takes a long time (seconds) + due to the slow i2c bus speed. So it will speed up the boot process if + you can avoid loading the fw as long as the video device isn't used. */ +static int cx25840_load_fw(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!state->is_initialized) { + /* initialize and load firmware */ + state->is_initialized = 1; + if (is_cx2583x(state)) + cx25836_initialize(client); + else if (is_cx2388x(state)) + cx23885_initialize(client); + else if (is_cx231xx(state)) + cx231xx_initialize(client); + else + cx25840_initialize(client); + } + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cx25840_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 1; + reg->val = cx25840_read(client, reg->reg & 0x0fff); + return 0; +} + +static int cx25840_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cx25840_write(client, reg->reg & 0x0fff, reg->val & 0xff); + return 0; +} +#endif + +static int cx25840_s_audio_stream(struct v4l2_subdev *sd, int enable) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 v; + + if (is_cx2583x(state) || is_cx2388x(state) || is_cx231xx(state)) + return 0; + + v4l_dbg(1, cx25840_debug, client, "%s audio output\n", + enable ? "enable" : "disable"); + + if (enable) { + v = cx25840_read(client, 0x115) | 0x80; + cx25840_write(client, 0x115, v); + v = cx25840_read(client, 0x116) | 0x03; + cx25840_write(client, 0x116, v); + } else { + v = cx25840_read(client, 0x115) & ~(0x80); + cx25840_write(client, 0x115, v); + v = cx25840_read(client, 0x116) & ~(0x03); + cx25840_write(client, 0x116, v); + } + return 0; +} + +static int cx25840_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 v; + + v4l_dbg(1, cx25840_debug, client, "%s video output\n", + enable ? "enable" : "disable"); + if (enable) { + if (is_cx2388x(state) || is_cx231xx(state)) { + v = cx25840_read(client, 0x421) | 0x0b; + cx25840_write(client, 0x421, v); + } else { + v = cx25840_read(client, 0x115) | 0x0c; + cx25840_write(client, 0x115, v); + v = cx25840_read(client, 0x116) | 0x04; + cx25840_write(client, 0x116, v); + } + } else { + if (is_cx2388x(state) || is_cx231xx(state)) { + v = cx25840_read(client, 0x421) & ~(0x0b); + cx25840_write(client, 0x421, v); + } else { + v = cx25840_read(client, 0x115) & ~(0x0c); + cx25840_write(client, 0x115, v); + v = cx25840_read(client, 0x116) & ~(0x04); + cx25840_write(client, 0x116, v); + } + } + return 0; +} + +/* Query the current detected video format */ +static int cx25840_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + v4l2_std_id stds[] = { + /* 0000 */ V4L2_STD_UNKNOWN, + + /* 0001 */ V4L2_STD_NTSC_M, + /* 0010 */ V4L2_STD_NTSC_M_JP, + /* 0011 */ V4L2_STD_NTSC_443, + /* 0100 */ V4L2_STD_PAL, + /* 0101 */ V4L2_STD_PAL_M, + /* 0110 */ V4L2_STD_PAL_N, + /* 0111 */ V4L2_STD_PAL_Nc, + /* 1000 */ V4L2_STD_PAL_60, + + /* 1001 */ V4L2_STD_UNKNOWN, + /* 1010 */ V4L2_STD_UNKNOWN, + /* 1001 */ V4L2_STD_UNKNOWN, + /* 1010 */ V4L2_STD_UNKNOWN, + /* 1011 */ V4L2_STD_UNKNOWN, + /* 1110 */ V4L2_STD_UNKNOWN, + /* 1111 */ V4L2_STD_UNKNOWN + }; + + u32 fmt = (cx25840_read4(client, 0x40c) >> 8) & 0xf; + *std = stds[ fmt ]; + + v4l_dbg(1, cx25840_debug, client, "g_std fmt = %x, v4l2_std_id = 0x%x\n", + fmt, (unsigned int)stds[ fmt ]); + + return 0; +} + +static int cx25840_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* A limited function that checks for signal status and returns + * the state. + */ + + /* Check for status of Horizontal lock (SRC lock isn't reliable) */ + if ((cx25840_read4(client, 0x40c) & 0x00010000) == 0) + *status |= V4L2_IN_ST_NO_SIGNAL; + + return 0; +} + +static int cx25840_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (state->radio == 0 && state->std == std) + return 0; + state->radio = 0; + state->std = std; + return set_v4lstd(client); +} + +static int cx25840_s_radio(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + + state->radio = 1; + return 0; +} + +static int cx25840_s_video_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (is_cx23888(state)) + cx23888_std_setup(client); + + return set_input(client, input, state->aud_input); +} + +static int cx25840_s_audio_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (is_cx23888(state)) + cx23888_std_setup(client); + return set_input(client, state->vid_input, input); +} + +static int cx25840_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + input_change(client); + return 0; +} + +static int cx25840_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 vpres = cx25840_read(client, 0x40e) & 0x20; + u8 mode; + int val = 0; + + if (state->radio) + return 0; + + vt->signal = vpres ? 0xffff : 0x0; + if (is_cx2583x(state)) + return 0; + + vt->capability |= + V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; + + mode = cx25840_read(client, 0x804); + + /* get rxsubchans and audmode */ + if ((mode & 0xf) == 1) + val |= V4L2_TUNER_SUB_STEREO; + else + val |= V4L2_TUNER_SUB_MONO; + + if (mode == 2 || mode == 4) + val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + + if (mode & 0x10) + val |= V4L2_TUNER_SUB_SAP; + + vt->rxsubchans = val; + vt->audmode = state->audmode; + return 0; +} + +static int cx25840_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (state->radio || is_cx2583x(state)) + return 0; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + /* mono -> mono + stereo -> mono + bilingual -> lang1 */ + cx25840_and_or(client, 0x809, ~0xf, 0x00); + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + /* mono -> mono + stereo -> stereo + bilingual -> lang1 */ + cx25840_and_or(client, 0x809, ~0xf, 0x04); + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang1/lang2 */ + cx25840_and_or(client, 0x809, ~0xf, 0x07); + break; + case V4L2_TUNER_MODE_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang2 */ + cx25840_and_or(client, 0x809, ~0xf, 0x01); + break; + default: + return -EINVAL; + } + state->audmode = vt->audmode; + return 0; +} + +static int cx25840_reset(struct v4l2_subdev *sd, u32 val) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (is_cx2583x(state)) + cx25836_initialize(client); + else if (is_cx2388x(state)) + cx23885_initialize(client); + else if (is_cx231xx(state)) + cx231xx_initialize(client); + else + cx25840_initialize(client); + return 0; +} + +static int cx25840_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev); +} + +static int cx25840_log_status(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + log_video_status(client); + if (!is_cx2583x(state)) + log_audio_status(client); + cx25840_ir_log_status(sd); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status, + bool *handled) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *c = v4l2_get_subdevdata(sd); + u8 irq_stat, aud_stat, aud_en, ir_stat, ir_en; + u32 vid_stat, aud_mc_stat; + bool block_handled; + int ret = 0; + + irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG); + v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (entry): %s %s %s\n", + irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : " ", + irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : " ", + irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : " "); + + if ((is_cx23885(state) || is_cx23887(state))) { + ir_stat = cx25840_read(c, CX25840_IR_STATS_REG); + ir_en = cx25840_read(c, CX25840_IR_IRQEN_REG); + v4l_dbg(2, cx25840_debug, c, + "AV Core ir IRQ status: %#04x disables: %#04x\n", + ir_stat, ir_en); + if (irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT) { + block_handled = false; + ret = cx25840_ir_irq_handler(sd, + status, &block_handled); + if (block_handled) + *handled = true; + } + } + + aud_stat = cx25840_read(c, CX25840_AUD_INT_STAT_REG); + aud_en = cx25840_read(c, CX25840_AUD_INT_CTRL_REG); + v4l_dbg(2, cx25840_debug, c, + "AV Core audio IRQ status: %#04x disables: %#04x\n", + aud_stat, aud_en); + aud_mc_stat = cx25840_read4(c, CX23885_AUD_MC_INT_MASK_REG); + v4l_dbg(2, cx25840_debug, c, + "AV Core audio MC IRQ status: %#06x enables: %#06x\n", + aud_mc_stat >> CX23885_AUD_MC_INT_STAT_SHFT, + aud_mc_stat & CX23885_AUD_MC_INT_CTRL_BITS); + if (irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT) { + if (aud_stat) { + cx25840_write(c, CX25840_AUD_INT_STAT_REG, aud_stat); + *handled = true; + } + } + + vid_stat = cx25840_read4(c, CX25840_VID_INT_STAT_REG); + v4l_dbg(2, cx25840_debug, c, + "AV Core video IRQ status: %#06x disables: %#06x\n", + vid_stat & CX25840_VID_INT_STAT_BITS, + vid_stat >> CX25840_VID_INT_MASK_SHFT); + if (irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT) { + if (vid_stat & CX25840_VID_INT_STAT_BITS) { + cx25840_write4(c, CX25840_VID_INT_STAT_REG, vid_stat); + *handled = true; + } + } + + irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG); + v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (exit): %s %s %s\n", + irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : " ", + irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : " ", + irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : " "); + + return ret; +} + +static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status, + bool *handled) +{ + struct cx25840_state *state = to_state(sd); + + *handled = false; + + /* Only support the CX2388[578] AV Core for now */ + if (is_cx2388x(state)) + return cx23885_irq_handler(sd, status, handled); + + return -ENODEV; +} + +/* ----------------------------------------------------------------------- */ + +#define DIF_PLL_FREQ_WORD (0x300) +#define DIF_BPF_COEFF01 (0x348) +#define DIF_BPF_COEFF23 (0x34c) +#define DIF_BPF_COEFF45 (0x350) +#define DIF_BPF_COEFF67 (0x354) +#define DIF_BPF_COEFF89 (0x358) +#define DIF_BPF_COEFF1011 (0x35c) +#define DIF_BPF_COEFF1213 (0x360) +#define DIF_BPF_COEFF1415 (0x364) +#define DIF_BPF_COEFF1617 (0x368) +#define DIF_BPF_COEFF1819 (0x36c) +#define DIF_BPF_COEFF2021 (0x370) +#define DIF_BPF_COEFF2223 (0x374) +#define DIF_BPF_COEFF2425 (0x378) +#define DIF_BPF_COEFF2627 (0x37c) +#define DIF_BPF_COEFF2829 (0x380) +#define DIF_BPF_COEFF3031 (0x384) +#define DIF_BPF_COEFF3233 (0x388) +#define DIF_BPF_COEFF3435 (0x38c) +#define DIF_BPF_COEFF36 (0x390) + +static void cx23885_dif_setup(struct i2c_client *client, u32 ifHz) +{ + u64 pll_freq; + u32 pll_freq_word; + + v4l_dbg(1, cx25840_debug, client, "%s(%d)\n", __func__, ifHz); + + /* Assuming TV */ + /* Calculate the PLL frequency word based on the adjusted ifHz */ + pll_freq = div_u64((u64)ifHz * 268435456, 50000000); + pll_freq_word = (u32)pll_freq; + + cx25840_write4(client, DIF_PLL_FREQ_WORD, pll_freq_word); + + /* Round down to the nearest 100KHz */ + ifHz = (ifHz / 100000) * 100000; + + if (ifHz < 3000000) + ifHz = 3000000; + + if (ifHz > 16000000) + ifHz = 16000000; + + v4l_dbg(1, cx25840_debug, client, "%s(%d) again\n", __func__, ifHz); + + switch (ifHz) { + case 3000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0024); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001bfff8); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffb4ff50); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed8fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe24fe34); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfebaffc7); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d031f); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04f0065d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07010688); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x04c901d6); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe00f9d3); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f342); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf235f337); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf64efb22); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0105070f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0c460fce); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00070012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00220032); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00370026); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff0ff91); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff0efe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01fdcc); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe0afedb); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440224); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0434060c); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0738074e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06090361); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff99fb39); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef3b6); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21af2a5); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf573fa33); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0034067d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0bfb0fb9); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0004000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00200038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004c004f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x002fffdf); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff5cfeb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0dfd92); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd7ffe03); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36010a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x03410575); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x072607d2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x071804d5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0134fcb7); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff451); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf223f22e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4a7f94b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xff6405e8); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0bae0fa4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00000008); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001a0036); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0056006d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00670030); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffbdff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe46fd8d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd25fd4f); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35ffe0); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0224049f); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c9080e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x07ef0627); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c9fe45); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f513); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf250f1d2); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3ecf869); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe930552); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0b5f0f8f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd0001); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000f002c); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0054007d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0093007c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0024ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea6fdbb); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd03fcca); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51feb9); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x00eb0392); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06270802); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08880750); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x044dffdb); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf5f8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a0f193); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf342f78f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc404b9); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0b0e0f78); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff9); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0002001b); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0046007d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00ad00ba); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00870000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff26fe1a); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd1bfc7e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fda4); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xffa5025c); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x054507ad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08dd0847); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b80172); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef6ff); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf313f170); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2abf6bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6041f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0abc0f61); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff3); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff50006); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002f006c); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b200e3); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00dc007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffb9fea0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd6bfc71); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fcb1); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe65010b); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x042d0713); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08ec0906); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07020302); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff823); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3a7f16a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf228f5f5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfc2a0384); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0a670f4a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7ffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe9fff1); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0010004d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a100f2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x011a00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0053ff44); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdedfca2); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fbef); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd39ffae); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x02ea0638); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08b50987); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08230483); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f960); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf45bf180); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1b8f537); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfb6102e7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0a110f32); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffdd); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff00024); + cx25840_write4(client, DIF_BPF_COEFF89, 0x007c00e5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013a014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00e6fff8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe98fd0f); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fb67); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc32fe54); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x01880525); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x083909c7); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x091505ee); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7fab3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf52df1b4); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf15df484); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfa9b0249); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x09ba0f19); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbfff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffcf); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1fff6); + cx25840_write4(client, DIF_BPF_COEFF89, 0x004800be); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01390184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x016300ac); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff5efdb1); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fb23); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb5cfd0d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x001703e4); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x077b09c4); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x09d2073c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251fc18); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf61cf203); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf118f3dc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf9d801aa); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x09600eff); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffefff4); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffca); + cx25840_write4(client, DIF_BPF_COEFF89, 0x000b0082); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01170198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01c10152); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0030fe7b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fb24); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfac3fbe9); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfea5027f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0683097f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a560867); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2fd89); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf723f26f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0e8f341); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf919010a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x09060ee5); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0002fffb); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe8ffca); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffa4); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffcd0036); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d70184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f601dc); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00ffff60); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb6d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa6efaf5); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd410103); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x055708f9); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a9e0969); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543ff02); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf842f2f5); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0cef2b2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf85e006b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x08aa0ecb); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00050003); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff3ffd3); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaff8b); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff95ffe5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0080014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fe023f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01ba0050); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fbf8); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa62fa3b); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbf9ff7e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x04010836); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aa90a3d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f007f); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf975f395); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0cbf231); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf7a9ffcb); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x084c0eaf); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000a); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0000ffe4); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ff81); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff6aff96); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x001c00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01d70271); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0254013b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fcbd); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa9ff9c5); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfadbfdfe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x028c073b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a750adf); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e101fa); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfab8f44e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0ddf1be); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf6f9ff2b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x07ed0e94); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0009000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000efff8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ff87); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff52ff54); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffb5007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01860270); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c00210); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fdb2); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb22f997); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9f2fc90); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0102060f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a050b4c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902036e); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfc0af51e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf106f15a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf64efe8b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x078d0e77); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0019000e); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff9e); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4fff25); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff560000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0112023b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f702c0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfec8); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbe5f9b3); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf947fb41); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xff7004b9); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x095a0b81); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a0004d8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfd65f603); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf144f104); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf5aafdec); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x072b0e5a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00060012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00200022); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ffc1); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff61ff10); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff09ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x008601d7); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f50340); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fff0); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcddfa19); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8e2fa1e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfde30343); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08790b7f); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50631); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfec7f6fc); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf198f0bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf50dfd4e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x06c90e3d); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00220030); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ffed); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff87ff15); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed6ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffed014c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b90386); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110119); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfdfefac4); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8c6f92f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc6701b7); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07670b44); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0776); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x002df807); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf200f086); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf477fcb1); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x06650e1e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0009); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003f001b); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffbcff36); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec2feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff5600a5); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0248038d); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00232); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff39fbab); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8f4f87f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb060020); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x062a0ad2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf908a3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0192f922); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf27df05e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf3e8fc14); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x06000e00); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc0002); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00160037); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00510046); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff9ff6d); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed0fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfecefff0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01aa0356); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413032b); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x007ffcc5); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf96cf812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9cefe87); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x04c90a2c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c4309b4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x02f3fa4a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf30ef046); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf361fb7a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x059b0de0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffa); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000a002d); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00570067); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0037ffb5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfefffe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe62ff3d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00ec02e3); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x043503f6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x01befe05); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa27f7ee); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8c6fcf8); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x034c0954); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5c0aa4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x044cfb7e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3b1f03f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf2e2fae1); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x05340dc0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff4); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffd001e); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0051007b); + cx25840_write4(client, DIF_BPF_COEFF89, 0x006e0006); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff48fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe1bfe9a); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x001d023e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130488); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x02e6ff5b); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb1ef812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7f7fb7f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x01bc084e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c430b72); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x059afcba); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf467f046); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf26cfa4a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x04cd0da0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8ffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff00009); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003f007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00980056); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffa5feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe00fe15); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff4b0170); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b004d7); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x03e800b9); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc48f87f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf768fa23); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0022071f); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf90c1b); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x06dafdfd); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf52df05e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf1fef9b5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x04640d7f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe6fff3); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00250072); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00af009c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x000cff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe13fdb8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe870089); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x031104e1); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04b8020f); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd98f92f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf71df8f0); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe8805ce); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0c9c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0808ff44); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf603f086); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf19af922); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x03fb0d5e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffe0); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00050056); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b000d1); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0071ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe53fd8c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfddfff99); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104a3); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x054a034d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xff01fa1e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf717f7ed); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfcf50461); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50cf4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0921008d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf6e7f0bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf13ff891); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x03920d3b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffffff3); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffd1); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5002f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x009c00ed); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00cb0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfebafd94); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd61feb0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d0422); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05970464); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0074fb41); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf759f721); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfb7502de); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000d21); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a2201d4); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf7d9f104); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0edf804); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x03280d19); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003fffa); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe3ffc9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc90002); + cx25840_write4(client, DIF_BPF_COEFF89, 0x007500ef); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x010e007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff3dfdcf); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd16fddd); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440365); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x059b0548); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x01e3fc90); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7dff691); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa0f014d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x09020d23); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b0a0318); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf8d7f15a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0a5f779); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x02bd0cf6); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00060001); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffecffc9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ffd4); + cx25840_write4(client, DIF_BPF_COEFF89, 0x004000d5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013600f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffd3fe39); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd04fd31); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff360277); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x055605ef); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x033efdfe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8a5f642); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf8cbffb6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e10cfb); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0bd50456); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf9dff1be); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf067f6f2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x02520cd2); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080009); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff8ffd2); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaffac); + cx25840_write4(client, DIF_BPF_COEFF89, 0x000200a3); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013c014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x006dfec9); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd2bfcb7); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe350165); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04cb0651); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0477ff7e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9a5f635); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7b1fe20); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0ca8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c81058b); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfaf0f231); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf033f66d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x01e60cae); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0009000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0005ffe1); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffacff90); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffc5005f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01210184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00fcff72); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd8afc77); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51003f); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04020669); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05830103); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfad7f66b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6c8fc93); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430c2b); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d0d06b5); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfc08f2b2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf00af5ec); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x017b0c89); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00070012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0012fff5); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaff82); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff8e000f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e80198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01750028); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe18fc75); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99ff15); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x03050636); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0656027f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc32f6e2); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf614fb17); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20b87); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d7707d2); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfd26f341); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefeaf56f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x010f0c64); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00050012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001c000b); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1ff84); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff66ffbe); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00960184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01cd00da); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfeccfcb2); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fdf9); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x01e005bc); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06e703e4); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfdabf798); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf599f9b3); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x02510abd); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dbf08df); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfe48f3dc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefd5f4f6); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x00a20c3e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0002000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0021001f); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0ff97); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff50ff74); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0034014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fa0179); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff97fd2a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fcfa); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x00a304fe); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07310525); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xff37f886); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55cf86e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c709d0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de209db); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xff6df484); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefcbf481); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x00360c18); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffe000a); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0021002f); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0010ffb8); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff50ff3b); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffcc00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fa01fa); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0069fdd4); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fc26); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff5d0407); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07310638); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x00c9f9a8); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55cf74e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff3908c3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de20ac3); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0093f537); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefcbf410); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xffca0bf2); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffb0003); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001c0037); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002fffe2); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff66ff17); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff6a007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01cd0251); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0134fea5); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fb8b); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe2002e0); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06e70713); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0255faf5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf599f658); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaf0799); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dbf0b96); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x01b8f5f5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefd5f3a3); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xff5e0bca); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffb); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00120037); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00460010); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff8eff0f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff180000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01750276); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01e8ff8d); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fb31); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcfb0198); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x065607ad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x03cefc64); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf614f592); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2e0656); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d770c52); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x02daf6bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefeaf33b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfef10ba3); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7fff5); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0005002f); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0054003c); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffc5ff22); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedfff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00fc0267); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0276007e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb1c); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbfe003e); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05830802); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0529fdec); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6c8f4fe); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabd04ff); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d0d0cf6); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x03f8f78f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf00af2d7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfe850b7b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff80020); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00560060); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0002ff4e); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec4ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x006d0225); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02d50166); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb4e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb35fee1); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0477080e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x065bff82); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7b1f4a0); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf9610397); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c810d80); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0510f869); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf033f278); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfe1a0b52); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffaffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffec000c); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0078); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0040ff8e); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecafeb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffd301b6); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fc0235); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fbc5); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaaafd90); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x033e07d2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x075b011b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf8cbf47a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81f0224); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0bd50def); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0621f94b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf067f21e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfdae0b29); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffdffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe3fff6); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0037007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0075ffdc); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef2fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff3d0122); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02ea02dd); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fc79); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa65fc5d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x01e3074e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x082102ad); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa0ff48c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fe00a9); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b0a0e43); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0729fa33); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0a5f1c9); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfd430b00); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0001fff3); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffe2); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001b0076); + cx25840_write4(client, DIF_BPF_COEFF89, 0x009c002d); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff35fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfeba0076); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x029f0352); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfd60); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa69fb53); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x00740688); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08a7042d); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfb75f4d6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600ff2d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a220e7a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0827fb22); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0edf17a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfcd80ad6); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0004fff9); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffd2); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfffb005e); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b0007a); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff8ffe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe53ffc1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0221038c); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fe6e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfab6fa80); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xff010587); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08e90590); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfcf5f556); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bfdb3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x09210e95); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0919fc15); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf13ff12f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfc6e0aab); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00070000); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe6ffc9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffdb0039); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00af00b8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfff4feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe13ff10); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01790388); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311ff92); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb48f9ed); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd980453); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08e306cd); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe88f60a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482fc40); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x08080e93); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x09fdfd0c); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf19af0ea); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfc050a81); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080008); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff0ffc9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1000d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x009800e2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x005bff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe00fe74); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00b50345); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b000bc); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc18f9a1); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc4802f9); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x089807dc); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0022f6f0); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407fada); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x06da0e74); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ad3fe06); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf1fef0ab); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfb9c0a55); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffdffd0); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffafffdf); + cx25840_write4(client, DIF_BPF_COEFF89, 0x006e00f2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00b8ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe1bfdf8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xffe302c8); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x041301dc); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd1af99e); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb1e0183); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x080908b5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x01bcf801); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdf985); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x059a0e38); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b99ff03); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf26cf071); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfb330a2a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00070011); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000affdf); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffa9ffb5); + cx25840_write4(client, DIF_BPF_COEFF89, 0x003700e6); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01010000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe62fda8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff140219); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x043502e1); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe42f9e6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa270000); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x073a0953); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x034cf939); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3a4f845); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x044c0de1); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c4f0000); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf2e2f03c); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfacc09fe); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00040012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0016fff3); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffafff95); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff900c0); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0130007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfecefd89); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe560146); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x041303bc); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff81fa76); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf96cfe7d); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x063209b1); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x04c9fa93); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdf71e); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x02f30d6e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cf200fd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf361f00e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfa6509d1); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00010010); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0008); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1ff84); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffbc0084); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013e00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff56fd9f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdb8005c); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00460); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x00c7fb45); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8f4fd07); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x04fa09ce); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x062afc07); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407f614); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x01920ce0); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d8301fa); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf3e8efe5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfa0009a4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd000b); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0022001d); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffdbff82); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff870039); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x012a014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffedfde7); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd47ff6b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x031104c6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0202fc4c); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8c6fbad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x039909a7); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0767fd8e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482f52b); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x002d0c39); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e0002f4); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf477efc2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf99b0977); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa0004); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0020002d); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfffbff91); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff61ffe8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f70184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0086fe5c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd0bfe85); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104e5); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0323fd7d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8e2fa79); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x021d093f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0879ff22); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bf465); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfec70b79); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e6803eb); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf50defa5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf937094a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fffd); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00190036); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001bffaf); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4fff99); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00aa0198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0112fef3); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd09fdb9); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d04be); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x041bfecc); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf947f978); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x00900897); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x095a00b9); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f3c5); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfd650aa3); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ebc04de); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf5aaef8e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf8d5091c); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7fff6); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000e0038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0037ffd7); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff52ff56); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x004b0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0186ffa1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd40fd16); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440452); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04de0029); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9f2f8b2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfefe07b5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a05024d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef34d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfc0a09b8); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0efa05cd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf64eef7d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf87308ed); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00000031); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0005); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff6aff27); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffe4014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01d70057); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdacfca6); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3603a7); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05610184); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfadbf82e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd74069f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a7503d6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff2ff); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfab808b9); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f2306b5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf6f9ef72); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf81308bf); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff30022); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00560032); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff95ff10); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff8000f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fe0106); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe46fc71); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3502c7); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x059e02ce); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbf9f7f2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfbff055b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aa9054c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f2db); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf97507aa); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f350797); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf7a9ef6d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf7b40890); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffeffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe8000f); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00540058); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffcdff14); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff29007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f6019e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff01fc7c); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd5101bf); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x059203f6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd41f7fe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfaa903f3); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a9e06a9); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf2e2); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf842068b); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f320871); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf85eef6e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf7560860); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0002fff2); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1fff9); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00460073); + cx25840_write4(client, DIF_BPF_COEFF89, 0x000bff34); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfee90000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01c10215); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xffd0fcc5); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99009d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x053d04f1); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfea5f853); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf97d0270); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a5607e4); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef314); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf723055f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f180943); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf919ef75); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf6fa0830); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0005fff8); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffe4); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002f007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0048ff6b); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec7ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0163025f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00a2fd47); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17ff73); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04a405b2); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0017f8ed); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf88500dc); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x09d208f9); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff370); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf61c0429); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ee80a0b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf9d8ef82); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf6a00800); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007ffff); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffd4); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0010007a); + cx25840_write4(client, DIF_BPF_COEFF89, 0x007cffb2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec6ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00e60277); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0168fdf9); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fe50); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x03ce0631); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0188f9c8); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7c7ff43); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x091509e3); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f3f6); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf52d02ea); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ea30ac9); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfa9bef95); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf64607d0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00090007); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe9ffca); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff00065); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a10003); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfee6feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0053025b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0213fed0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fd46); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x02c70668); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x02eafadb); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf74bfdae); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08230a9c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7f4a3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf45b01a6); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e480b7c); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfb61efae); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf5ef079f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000d); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff5ffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd10043); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b20053); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff24fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffb9020c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0295ffbb); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fc64); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x019b0654); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x042dfc1c); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf714fc2a); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07020b21); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251f575); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3a7005e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0dd80c24); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfc2aefcd); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf599076e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00060011); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0002ffcf); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffba0018); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00ad009a); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff79fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff260192); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02e500ab); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fbb6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x005b05f7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0545fd81); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf723fabf); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b80b70); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2f669); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf313ff15); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d550cbf); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6eff2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf544073d); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00030012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000fffdd); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffea); + cx25840_write4(client, DIF_BPF_COEFF89, 0x009300cf); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffdcfe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea600f7); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fd0190); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb46); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff150554); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0627fefd); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf778f978); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x044d0b87); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543f77d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a0fdcf); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cbe0d4e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc4f01d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4f2070b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00000010); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001afff0); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaffbf); + cx25840_write4(client, DIF_BPF_COEFF89, 0x006700ed); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0043feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe460047); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02db0258); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb1b); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfddc0473); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c90082); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf811f85e); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c90b66); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069ff8ad); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf250fc8d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c140dcf); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe93f04d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4a106d9); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc000c); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00200006); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ff9c); + cx25840_write4(client, DIF_BPF_COEFF89, 0x002f00ef); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00a4ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0dff92); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x028102f7); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb37); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcbf035e); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07260202); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8e8f778); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x01340b0d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1f9f4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf223fb51); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b590e42); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xff64f083); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf45206a7); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff90005); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0022001a); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ff86); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff000d7); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f2ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01fee5); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01f60362); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb99); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbcc0222); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07380370); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9f7f6cc); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff990a7e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902fb50); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21afa1f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0a8d0ea6); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0034f0bf); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4050675); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fffe); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001e002b); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff81); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffb400a5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01280000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe24fe50); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01460390); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfc3a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb1000ce); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x070104bf); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb37f65f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe0009bc); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a00fcbb); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf235f8f8); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x09b20efc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0105f101); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf3ba0642); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff7); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00150036); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ff8c); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff810061); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013d007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe71fddf); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x007c0380); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fd13); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa94ff70); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x068005e2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc9bf633); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfc7308ca); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad5fe30); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf274f7e0); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x08c90f43); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x01d4f147); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf371060f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fff1); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00090038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ffa7); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff5e0012); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013200f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfee3fd9b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xffaa0331); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fe15); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa60fe18); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05bd06d1); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe1bf64a); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfafa07ae); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7effab); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2d5f6d7); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x07d30f7a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x02a3f194); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf32905dc); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffb0032); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003fffcd); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4effc1); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0106014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff6efd8a); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfedd02aa); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0ff34); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa74fcd7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x04bf0781); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xffaaf6a3); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf99e066b); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf90128); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf359f5e1); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x06d20fa2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0370f1e5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2e405a8); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffffffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffef0024); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0051fffa); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff54ff77); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00be0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0006fdad); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe2701f3); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413005e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfad1fbba); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x039007ee); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x013bf73d); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf868050a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c4302a1); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3fdf4fe); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x05c70fba); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x043bf23c); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2a10575); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003fff1); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe50011); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00570027); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff70ff3c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00620198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x009efe01); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd95011a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04350183); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb71fad0); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x023c0812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x02c3f811); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf75e0390); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5c0411); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf4c1f432); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x04b30fc1); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0503f297); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2610541); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0006fff7); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdffffc); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00510050); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff9dff18); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfffc0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0128fe80); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd32002e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130292); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc4dfa21); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x00d107ee); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0435f91c); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6850205); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c430573); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf5a1f37d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x03990fba); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x05c7f2f8); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf222050d); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffe); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdfffe7); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003f006e); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffd6ff0f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff96014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0197ff1f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd05ff3e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0037c); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd59f9b7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xff5d0781); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0585fa56); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5e4006f); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf906c4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf69df2e0); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x02790fa2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0688f35d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1e604d8); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00090005); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe4ffd6); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0025007e); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0014ff20); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff3c00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e1ffd0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd12fe5c); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110433); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe88f996); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfdf106d1); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06aafbb7); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf57efed8); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e07ff); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf7b0f25e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x01560f7a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0745f3c7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1ac04a4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000c); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffedffcb); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0005007d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0050ff4c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef6007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01ff0086); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd58fd97); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104ad); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xffcaf9c0); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc9905e2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x079afd35); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf555fd46); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50920); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf8d9f1f6); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x00310f43); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x07fdf435); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf174046f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00050011); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffaffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5006b); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0082ff8c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecc0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f00130); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdd2fcfc); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d04e3); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x010efa32); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb6404bf); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x084efec5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf569fbc2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000a23); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfa15f1ab); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xff0b0efc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x08b0f4a7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf13f043a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00020012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0007ffcd); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9004c); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a4ffd9); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec3ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01b401c1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe76fc97); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x004404d2); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0245fae8); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa5f0370); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08c1005f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5bcfa52); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x09020b04); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfb60f17b); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfde70ea6); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x095df51e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf10c0405); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0011); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0014ffdb); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb40023); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b2002a); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedbff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0150022d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff38fc6f); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36047b); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x035efbda); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9940202); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08ee01f5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf649f8fe); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e10bc2); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfcb6f169); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfcc60e42); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0a04f599); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0db03d0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffb000d); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001dffed); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaafff5); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00aa0077); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff13feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00ce026b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x000afc85); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3503e3); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x044cfcfb); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf90c0082); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08d5037f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf710f7cc); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0c59); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfe16f173); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfbaa0dcf); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0aa5f617); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0ad039b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff90006); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00210003); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffc8); + cx25840_write4(client, DIF_BPF_COEFF89, 0x008e00b6); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff63fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x003a0275); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00dafcda); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd510313); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0501fe40); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8cbfefd); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x087604f0); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf80af6c2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430cc8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xff7af19a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfa940d4e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0b3ff699); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0810365); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8ffff); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00210018); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffa3); + cx25840_write4(client, DIF_BPF_COEFF89, 0x006000e1); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffc4fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffa0024b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x019afd66); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc990216); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0575ff99); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8d4fd81); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x07d40640); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf932f5e6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20d0d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x00dff1de); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf9860cbf); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0bd1f71e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf058032f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff8); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001b0029); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1ff8a); + cx25840_write4(client, DIF_BPF_COEFF89, 0x002600f2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x002cfe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff0f01f0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x023bfe20); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc1700fa); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05a200f7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf927fc1c); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06f40765); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa82f53b); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x02510d27); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0243f23d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf8810c24); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0c5cf7a7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf03102fa); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff2); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00110035); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0ff81); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffe700e7); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x008ffeb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe94016d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b0fefb); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3ffd1); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05850249); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9c1fadb); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x05de0858); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfbf2f4c4); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c70d17); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x03a0f2b8); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf7870b7c); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0cdff833); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf00d02c4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffdffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00040038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0010ff88); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffac00c2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e2ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe3900cb); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f1ffe9); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3feaa); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05210381); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa9cf9c8); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x04990912); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfd7af484); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff390cdb); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x04f4f34d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf69a0ac9); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0d5af8c1); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefec028e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0000ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff60033); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002fff9f); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff7b0087); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x011eff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe080018); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f900d8); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fd96); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04790490); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbadf8ed); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x032f098e); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff10f47d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaf0c75); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x063cf3fc); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf5ba0a0b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0dccf952); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefcd0258); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0004fff1); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffea0026); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0046ffc3); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff5a003c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013b0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe04ff63); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c801b8); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fca6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0397056a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfcecf853); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x01ad09c9); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x00acf4ad); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2e0be7); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0773f4c2); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4e90943); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e35f9e6); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefb10221); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007fff6); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe20014); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0054ffee); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4effeb); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0137007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2efebb); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0260027a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fbe6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x02870605); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfe4af7fe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x001d09c1); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0243f515); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabd0b32); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0897f59e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4280871); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e95fa7c); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef9701eb); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffd); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffff); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0056001d); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff57ff9c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x011300f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe82fe2e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01ca0310); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb62); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0155065a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xffbaf7f2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe8c0977); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x03cef5b2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf9610a58); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x09a5f68f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3790797); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0eebfb14); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef8001b5); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080004); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffe9); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0047); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff75ff58); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d1014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfef9fdc8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0111036f); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb21); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x00120665); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x012df82e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd0708ec); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0542f682); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81f095c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a9af792); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2db06b5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f38fbad); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef6c017e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007000b); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe7ffd8); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00370068); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffa4ff28); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00790184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff87fd91); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00430392); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb26); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfece0626); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0294f8b2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb990825); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0698f77f); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fe0842); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b73f8a7); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf25105cd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f7bfc48); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef5a0148); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00050010); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff2ffcc); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001b007b); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffdfff10); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00140198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0020fd8e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff710375); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfb73); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd9a059f); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x03e0f978); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfa4e0726); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07c8f8a7); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600070c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c2ff9c9); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1db04de); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fb4fce5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef4b0111); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00010012); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffffffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfffb007e); + cx25840_write4(client, DIF_BPF_COEFF89, 0x001dff14); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffad0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00b7fdbe); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfea9031b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fc01); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc8504d6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0504fa79); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf93005f6); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08caf9f2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52b05c0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0ccbfaf9); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf17903eb); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fe3fd83); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3f00db); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffe0011); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000cffcc); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffdb0071); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0058ff32); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff4f014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x013cfe1f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdfb028a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fcc9); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb9d03d6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05f4fbad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf848049d); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0999fb5b); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf4820461); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d46fc32); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf12d02f4); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x1007fe21); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3600a4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0017ffd9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc10055); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0088ff68); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff0400f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01a6fea7); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd7501cc); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0fdc0); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaef02a8); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06a7fd07); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf79d0326); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a31fcda); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf40702f3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d9ffd72); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0f601fa); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x1021fec0); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2f006d); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80007); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001fffeb); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaf002d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a8ffb0); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed3007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e9ff4c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd2000ee); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413fed8); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa82015c); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0715fe7d); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7340198); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a8dfe69); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bd017c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dd5feb8); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0d500fd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x1031ff60); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2b0037); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff70000); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00220000); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffa90000); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b30000); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec20000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x02000000); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd030000); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04350000); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa5e0000); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x073b0000); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7110000); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aac0000); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3a40000); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de70000); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0c90000); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x10360000); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef290000); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff9); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001f0015); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffafffd3); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a80050); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed3ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e900b4); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd20ff12); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130128); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa82fea4); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07150183); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf734fe68); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a8d0197); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdfe84); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dd50148); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0d5ff03); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x103100a0); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2bffc9); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff2); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00170027); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1ffab); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00880098); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff04ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01a60159); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd75fe34); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00240); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaeffd58); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06a702f9); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf79dfcda); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a310326); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407fd0d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d9f028e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0f6fe06); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x10210140); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2fff93); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffeffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000c0034); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffdbff8f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x005800ce); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff4ffeb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x013c01e1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdfbfd76); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110337); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb9dfc2a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05f40453); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf848fb63); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x099904a5); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482fb9f); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d4603ce); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf12dfd0c); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x100701df); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef36ff5c); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0001ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffff0038); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfffbff82); + cx25840_write4(client, DIF_BPF_COEFF89, 0x001d00ec); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffadfe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00b70242); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfea9fce5); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024103ff); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc85fb2a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05040587); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf930fa0a); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08ca060e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bfa40); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0ccb0507); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf179fc15); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fe3027d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3fff25); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0005fff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff20034); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001bff85); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffdf00f0); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0014fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00200272); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff71fc8b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d048d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd9afa61); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x03e00688); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfa4ef8da); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07c80759); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f8f4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c2f0637); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1dbfb22); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fb4031b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef4bfeef); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007fff5); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe70028); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0037ff98); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffa400d8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0079fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff87026f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0043fc6e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x004404da); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfecef9da); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0294074e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb99f7db); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x06980881); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef7be); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b730759); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf251fa33); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f7b03b8); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef5afeb8); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffc); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe00017); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004cffb9); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff7500a8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d1feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfef90238); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0111fc91); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3604df); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0012f99b); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x012d07d2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd07f714); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0542097e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff6a4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a9a086e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2dbf94b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f380453); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef6cfe82); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080003); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffde0001); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0056ffe3); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff570064); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0113ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe8201d2); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01cafcf0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35049e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0155f9a6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xffba080e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe8cf689); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x03ce0a4e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f5a8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x09a50971); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf379f869); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0eeb04ec); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef80fe4b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007000a); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe2ffec); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00540012); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4e0015); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0137ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2e0145); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0260fd86); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51041a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0287f9fb); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfe4a0802); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x001df63f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x02430aeb); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf4ce); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x08970a62); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf428f78f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e950584); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef97fe15); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0004000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffeaffda); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0046003d); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff5affc4); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013b0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe04009d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c8fe48); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99035a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0397fa96); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfcec07ad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x01adf637); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x00ac0b53); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef419); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x07730b3e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4e9f6bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e35061a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefb1fddf); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00000012); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff6ffcd); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002f0061); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff7bff79); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x011e007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe08ffe8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f9ff28); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17026a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0479fb70); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbad0713); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x032ff672); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff100b83); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff38b); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x063c0c04); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf5baf5f5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0dcc06ae); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefcdfda8); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd0012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0004ffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00100078); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffacff3e); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e200f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe39ff35); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f10017); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd30156); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0521fc7f); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa9c0638); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0499f6ee); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfd7a0b7c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f325); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x04f40cb3); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf69af537); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0d5a073f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefecfd72); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0011ffcb); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffe7ff19); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x008f014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe94fe93); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b00105); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3002f); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0585fdb7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9c10525); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x05def7a8); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfbf20b3c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7f2e9); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x03a00d48); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf787f484); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0cdf07cd); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf00dfd3c); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80008); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001bffd7); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd10076); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0026ff0e); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x002c0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff0ffe10); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x023b01e0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17ff06); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05a2ff09); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf92703e4); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06f4f89b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa820ac5); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251f2d9); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x02430dc3); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf881f3dc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0c5c0859); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf031fd06); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80001); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0021ffe8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffba005d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0060ff1f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffc40198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffa0fdb5); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x019a029a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fdea); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05750067); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8d4027f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x07d4f9c0); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf9320a1a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2f2f3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x00df0e22); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf986f341); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0bd108e2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf058fcd1); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffa); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0021fffd); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffac0038); + cx25840_write4(client, DIF_BPF_COEFF89, 0x008eff4a); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff630184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x003afd8b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00da0326); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fced); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x050101c0); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8cb0103); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0876fb10); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf80a093e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543f338); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xff7a0e66); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfa94f2b2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0b3f0967); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf081fc9b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbfff3); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001d0013); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaa000b); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00aaff89); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff13014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00cefd95); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x000a037b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fc1d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x044c0305); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf90cff7e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08d5fc81); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7100834); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069ff3a7); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfe160e8d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfbaaf231); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0aa509e9); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0adfc65); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffffffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00140025); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ffdd); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b2ffd6); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedb00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0150fdd3); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff380391); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb85); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x035e0426); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf994fdfe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08eefe0b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6490702); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1f43e); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfcb60e97); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfcc6f1be); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0a040a67); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0dbfc30); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0002ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00070033); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ffb4); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a40027); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec3007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01b4fe3f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe760369); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb2e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x02450518); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa5ffc90); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08c1ffa1); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5bc05ae); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902f4fc); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfb600e85); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfde7f15a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x095d0ae2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf10cfbfb); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0005ffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffa0038); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff95); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00820074); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecc0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f0fed0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdd20304); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfb1d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x010e05ce); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb64fb41); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x084e013b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf569043e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a00f5dd); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfa150e55); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xff0bf104); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x08b00b59); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf13ffbc6); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fff4); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffed0035); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ff83); + cx25840_write4(client, DIF_BPF_COEFF89, 0x005000b4); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef6ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01ffff7a); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd580269); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fb53); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xffca0640); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc99fa1e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x079a02cb); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55502ba); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad5f6e0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf8d90e0a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0031f0bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x07fd0bcb); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf174fb91); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0009fffb); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe4002a); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ff82); + cx25840_write4(client, DIF_BPF_COEFF89, 0x001400e0); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff3cff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e10030); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd1201a4); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fbcd); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe88066a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfdf1f92f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06aa0449); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf57e0128); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7ef801); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf7b00da2); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0156f086); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x07450c39); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1acfb5c); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080002); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdf0019); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003fff92); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffd600f1); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff96feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x019700e1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd0500c2); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0fc84); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd590649); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xff5df87f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x058505aa); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5e4ff91); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf9f93c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf69d0d20); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0279f05e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x06880ca3); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1e6fb28); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00060009); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdf0004); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0051ffb0); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff9d00e8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfffcfe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01280180); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd32ffd2); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413fd6e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc4d05df); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x00d1f812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x043506e4); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf685fdfb); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c43fa8d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf5a10c83); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0399f046); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x05c70d08); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf222faf3); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe5ffef); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0057ffd9); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff7000c4); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0062fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x009e01ff); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd95fee6); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0435fe7d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb710530); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x023cf7ee); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x02c307ef); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf75efc70); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5cfbef); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf4c10bce); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x04b3f03f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x05030d69); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf261fabf); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0012); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffefffdc); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00510006); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff540089); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00befe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00060253); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe27fe0d); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413ffa2); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfad10446); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0390f812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x013b08c3); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf868faf6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c43fd5f); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3fd0b02); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x05c7f046); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x043b0dc4); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2a1fa8b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc0012); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffbffce); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003f0033); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4e003f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0106feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff6e0276); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfeddfd56); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b000cc); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa740329); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x04bff87f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xffaa095d); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf99ef995); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf9fed8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3590a1f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x06d2f05e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x03700e1b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2e4fa58); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0009ffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00250059); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff5effee); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0132ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfee30265); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xffaafccf); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x031101eb); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa6001e8); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05bdf92f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe1b09b6); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfafaf852); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0055); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2d50929); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x07d3f086); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x02a30e6c); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf329fa24); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80009); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0015ffca); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00050074); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff81ff9f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013dff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe710221); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x007cfc80); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024102ed); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa940090); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0680fa1e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc9b09cd); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfc73f736); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad501d0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2740820); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x08c9f0bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x01d40eb9); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf371f9f1); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80002); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001effd5); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffb4ff5b); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01280000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2401b0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0146fc70); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d03c6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb10ff32); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0701fb41); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb3709a1); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe00f644); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000345); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2350708); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x09b2f104); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x01050eff); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf3baf9be); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffb); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0022ffe6); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9007a); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff0ff29); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f2007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01011b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01f6fc9e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440467); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbccfdde); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0738fc90); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9f70934); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff99f582); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x090204b0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21a05e1); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0a8df15a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x00340f41); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf405f98b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcfff4); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0020fffa); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb40064); + cx25840_write4(client, DIF_BPF_COEFF89, 0x002fff11); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00a400f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0d006e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0281fd09); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3604c9); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcbffca2); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0726fdfe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8e80888); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0134f4f3); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1060c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf22304af); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b59f1be); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xff640f7d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf452f959); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0000fff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001a0010); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaa0041); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0067ff13); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0043014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe46ffb9); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02dbfda8); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3504e5); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfddcfb8d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c9ff7e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf81107a2); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c9f49a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0753); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2500373); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c14f231); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe930fb3); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4a1f927); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000f0023); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffac0016); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0093ff31); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffdc0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea6ff09); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fdfe70); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd5104ba); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff15faac); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06270103); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7780688); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x044df479); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430883); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a00231); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cbef2b2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc40fe3); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4f2f8f5); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 16000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0006ffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00020031); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffe8); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00adff66); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff790198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff26fe6e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02e5ff55); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99044a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x005bfa09); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0545027f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7230541); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b8f490); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20997); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf31300eb); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d55f341); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6100e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf544f8c3); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + } +} + +static void cx23888_std_setup(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + v4l2_std_id std = state->std; + u32 ifHz; + + cx25840_write4(client, 0x478, 0x6628021F); + cx25840_write4(client, 0x400, 0x0); + cx25840_write4(client, 0x4b4, 0x20524030); + cx25840_write4(client, 0x47c, 0x010a8263); + + if (std & V4L2_STD_NTSC) { + v4l_dbg(1, cx25840_debug, client, "%s() Selecting NTSC", + __func__); + + /* Horiz / vert timing */ + cx25840_write4(client, 0x428, 0x1e1e601a); + cx25840_write4(client, 0x424, 0x5b2d007a); + + /* DIF NTSC */ + cx25840_write4(client, 0x304, 0x6503bc0c); + cx25840_write4(client, 0x308, 0xbd038c85); + cx25840_write4(client, 0x30c, 0x1db4640a); + cx25840_write4(client, 0x310, 0x00008800); + cx25840_write4(client, 0x314, 0x44400400); + cx25840_write4(client, 0x32c, 0x0c800800); + cx25840_write4(client, 0x330, 0x27000100); + cx25840_write4(client, 0x334, 0x1f296e1f); + cx25840_write4(client, 0x338, 0x009f50c1); + cx25840_write4(client, 0x340, 0x1befbf06); + cx25840_write4(client, 0x344, 0x000035e8); + + /* DIF I/F */ + ifHz = 5400000; + + } else { + v4l_dbg(1, cx25840_debug, client, "%s() Selecting PAL-BG", + __func__); + + /* Horiz / vert timing */ + cx25840_write4(client, 0x428, 0x28244024); + cx25840_write4(client, 0x424, 0x5d2d0084); + + /* DIF */ + cx25840_write4(client, 0x304, 0x6503bc0c); + cx25840_write4(client, 0x308, 0xbd038c85); + cx25840_write4(client, 0x30c, 0x1db4640a); + cx25840_write4(client, 0x310, 0x00008800); + cx25840_write4(client, 0x314, 0x44400600); + cx25840_write4(client, 0x32c, 0x0c800800); + cx25840_write4(client, 0x330, 0x27000100); + cx25840_write4(client, 0x334, 0x213530ec); + cx25840_write4(client, 0x338, 0x00a65ba8); + cx25840_write4(client, 0x340, 0x1befbf06); + cx25840_write4(client, 0x344, 0x000035e8); + + /* DIF I/F */ + ifHz = 6000000; + } + + cx23885_dif_setup(client, ifHz); + + /* Explicitly ensure the inputs are reconfigured after + * a standard change. + */ + set_input(client, state->vid_input, state->aud_input); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops cx25840_ctrl_ops = { + .s_ctrl = cx25840_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops cx25840_core_ops = { + .log_status = cx25840_log_status, + .g_chip_ident = cx25840_g_chip_ident, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = cx25840_s_std, + .g_std = cx25840_g_std, + .reset = cx25840_reset, + .load_fw = cx25840_load_fw, + .s_io_pin_config = common_s_io_pin_config, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = cx25840_g_register, + .s_register = cx25840_s_register, +#endif + .interrupt_service_routine = cx25840_irq_handler, +}; + +static const struct v4l2_subdev_tuner_ops cx25840_tuner_ops = { + .s_frequency = cx25840_s_frequency, + .s_radio = cx25840_s_radio, + .g_tuner = cx25840_g_tuner, + .s_tuner = cx25840_s_tuner, +}; + +static const struct v4l2_subdev_audio_ops cx25840_audio_ops = { + .s_clock_freq = cx25840_s_clock_freq, + .s_routing = cx25840_s_audio_routing, + .s_stream = cx25840_s_audio_stream, +}; + +static const struct v4l2_subdev_video_ops cx25840_video_ops = { + .s_routing = cx25840_s_video_routing, + .s_mbus_fmt = cx25840_s_mbus_fmt, + .s_stream = cx25840_s_stream, + .g_input_status = cx25840_g_input_status, +}; + +static const struct v4l2_subdev_vbi_ops cx25840_vbi_ops = { + .decode_vbi_line = cx25840_decode_vbi_line, + .s_raw_fmt = cx25840_s_raw_fmt, + .s_sliced_fmt = cx25840_s_sliced_fmt, + .g_sliced_fmt = cx25840_g_sliced_fmt, +}; + +static const struct v4l2_subdev_ops cx25840_ops = { + .core = &cx25840_core_ops, + .tuner = &cx25840_tuner_ops, + .audio = &cx25840_audio_ops, + .video = &cx25840_video_ops, + .vbi = &cx25840_vbi_ops, + .ir = &cx25840_ir_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static u32 get_cx2388x_ident(struct i2c_client *client) +{ + u32 ret; + + /* Come out of digital power down */ + cx25840_write(client, 0x000, 0); + + /* Detecting whether the part is cx23885/7/8 is more + * difficult than it needs to be. No ID register. Instead we + * probe certain registers indicated in the datasheets to look + * for specific defaults that differ between the silicon designs. */ + + /* It's either 885/7 if the IR Tx Clk Divider register exists */ + if (cx25840_read4(client, 0x204) & 0xffff) { + /* CX23885 returns bogus repetitive byte values for the DIF, + * which doesn't exist for it. (Ex. 8a8a8a8a or 31313131) */ + ret = cx25840_read4(client, 0x300); + if (((ret & 0xffff0000) >> 16) == (ret & 0xffff)) { + /* No DIF */ + ret = V4L2_IDENT_CX23885_AV; + } else { + /* CX23887 has a broken DIF, but the registers + * appear valid (but unused), good enough to detect. */ + ret = V4L2_IDENT_CX23887_AV; + } + } else if (cx25840_read4(client, 0x300) & 0x0fffffff) { + /* DIF PLL Freq Word reg exists; chip must be a CX23888 */ + ret = V4L2_IDENT_CX23888_AV; + } else { + v4l_err(client, "Unable to detect h/w, assuming cx23887\n"); + ret = V4L2_IDENT_CX23887_AV; + } + + /* Back into digital power down */ + cx25840_write(client, 0x000, 2); + return ret; +} + +static int cx25840_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct cx25840_state *state; + struct v4l2_subdev *sd; + int default_volume; + u32 id = V4L2_IDENT_NONE; + u16 device_id; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_dbg(1, cx25840_debug, client, "detecting cx25840 client on address 0x%x\n", client->addr << 1); + + device_id = cx25840_read(client, 0x101) << 8; + device_id |= cx25840_read(client, 0x100); + v4l_dbg(1, cx25840_debug, client, "device_id = 0x%04x\n", device_id); + + /* The high byte of the device ID should be + * 0x83 for the cx2583x and 0x84 for the cx2584x */ + if ((device_id & 0xff00) == 0x8300) { + id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6; + } else if ((device_id & 0xff00) == 0x8400) { + id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf); + } else if (device_id == 0x0000) { + id = get_cx2388x_ident(client); + } else if ((device_id & 0xfff0) == 0x5A30) { + /* The CX23100 (0x5A3C = 23100) doesn't have an A/V decoder */ + id = V4L2_IDENT_CX2310X_AV; + } else if ((device_id & 0xff) == (device_id >> 8)) { + v4l_err(client, + "likely a confused/unresponsive cx2388[578] A/V decoder" + " found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + v4l_err(client, "A method to reset it from the cx25840 driver" + " software is not known at this time\n"); + return -ENODEV; + } else { + v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n"); + return -ENODEV; + } + + state = kzalloc(sizeof(struct cx25840_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &cx25840_ops); + + switch (id) { + case V4L2_IDENT_CX23885_AV: + v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX23887_AV: + v4l_info(client, "cx23887 A/V decoder found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX23888_AV: + v4l_info(client, "cx23888 A/V decoder found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX2310X_AV: + v4l_info(client, "cx%d A/V decoder found @ 0x%x (%s)\n", + device_id, client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX25840: + case V4L2_IDENT_CX25841: + case V4L2_IDENT_CX25842: + case V4L2_IDENT_CX25843: + /* Note: revision '(device_id & 0x0f) == 2' was never built. The + marking skips from 0x1 == 22 to 0x3 == 23. */ + v4l_info(client, "cx25%3x-2%x found @ 0x%x (%s)\n", + (device_id & 0xfff0) >> 4, + (device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1 + : (device_id & 0x0f), + client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX25836: + case V4L2_IDENT_CX25837: + default: + v4l_info(client, "cx25%3x-%x found @ 0x%x (%s)\n", + (device_id & 0xfff0) >> 4, device_id & 0x0f, + client->addr << 1, client->adapter->name); + break; + } + + state->c = client; + state->vid_input = CX25840_COMPOSITE7; + state->aud_input = CX25840_AUDIO8; + state->audclk_freq = 48000; + state->audmode = V4L2_TUNER_MODE_LANG1; + state->vbi_line_offset = 8; + state->id = id; + state->rev = device_id; + v4l2_ctrl_handler_init(&state->hdl, 9); + v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + if (!is_cx2583x(state)) { + default_volume = cx25840_read(client, 0x8d4); + /* + * Enforce the legacy PVR-350/MSP3400 to PVR-150/CX25843 volume + * scale mapping limits to avoid -ERANGE errors when + * initializing the volume control + */ + if (default_volume > 228) { + /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */ + default_volume = 228; + cx25840_write(client, 0x8d4, 228); + } + else if (default_volume < 20) { + /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */ + default_volume = 20; + cx25840_write(client, 0x8d4, 20); + } + default_volume = (((228 - default_volume) >> 1) + 23) << 9; + + state->volume = v4l2_ctrl_new_std(&state->hdl, + &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME, + 0, 65535, 65535 / 100, default_volume); + state->mute = v4l2_ctrl_new_std(&state->hdl, + &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE, + 0, 1, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, + V4L2_CID_AUDIO_BASS, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, + 0, 65535, 65535 / 100, 32768); + } + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + if (!is_cx2583x(state)) + v4l2_ctrl_cluster(2, &state->volume); + v4l2_ctrl_handler_setup(&state->hdl); + + if (client->dev.platform_data) { + struct cx25840_platform_data *pdata = client->dev.platform_data; + + state->pvr150_workaround = pdata->pvr150_workaround; + } + + cx25840_ir_probe(sd); + return 0; +} + +static int cx25840_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct cx25840_state *state = to_state(sd); + + cx25840_ir_remove(sd); + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +static const struct i2c_device_id cx25840_id[] = { + { "cx25840", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cx25840_id); + +static struct i2c_driver cx25840_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "cx25840", + }, + .probe = cx25840_probe, + .remove = cx25840_remove, + .id_table = cx25840_id, +}; + +module_i2c_driver(cx25840_driver); diff --git a/drivers/media/i2c/cx25840/cx25840-core.h b/drivers/media/i2c/cx25840/cx25840-core.h new file mode 100644 index 00000000..bd4ada28 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-core.h @@ -0,0 +1,137 @@ +/* cx25840 internal API header + * + * Copyright (C) 2003-2004 Chris Kennedy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef _CX25840_CORE_H_ +#define _CX25840_CORE_H_ + + +#include +#include +#include +#include +#include + +struct cx25840_ir_state; + +struct cx25840_state { + struct i2c_client *c; + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct { + /* volume cluster */ + struct v4l2_ctrl *volume; + struct v4l2_ctrl *mute; + }; + int pvr150_workaround; + int radio; + v4l2_std_id std; + enum cx25840_video_input vid_input; + enum cx25840_audio_input aud_input; + u32 audclk_freq; + int audmode; + int vbi_line_offset; + u32 id; + u32 rev; + int is_initialized; + wait_queue_head_t fw_wait; /* wake up when the fw load is finished */ + struct work_struct fw_work; /* work entry for fw load */ + struct cx25840_ir_state *ir_state; +}; + +static inline struct cx25840_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct cx25840_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cx25840_state, hdl)->sd; +} + +static inline bool is_cx2583x(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX25836 || + state->id == V4L2_IDENT_CX25837; +} + +static inline bool is_cx231xx(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX2310X_AV; +} + +static inline bool is_cx2388x(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX23885_AV || + state->id == V4L2_IDENT_CX23887_AV || + state->id == V4L2_IDENT_CX23888_AV; +} + +static inline bool is_cx23885(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX23885_AV; +} + +static inline bool is_cx23887(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX23887_AV; +} + +static inline bool is_cx23888(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX23888_AV; +} + +/* ----------------------------------------------------------------------- */ +/* cx25850-core.c */ +int cx25840_write(struct i2c_client *client, u16 addr, u8 value); +int cx25840_write4(struct i2c_client *client, u16 addr, u32 value); +u8 cx25840_read(struct i2c_client *client, u16 addr); +u32 cx25840_read4(struct i2c_client *client, u16 addr); +int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value); +int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask, + u32 or_value); +void cx25840_std_setup(struct i2c_client *client); + +/* ----------------------------------------------------------------------- */ +/* cx25850-firmware.c */ +int cx25840_loadfw(struct i2c_client *client); + +/* ----------------------------------------------------------------------- */ +/* cx25850-audio.c */ +void cx25840_audio_set_path(struct i2c_client *client); +int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq); + +extern const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops; + +/* ----------------------------------------------------------------------- */ +/* cx25850-vbi.c */ +int cx25840_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt); +int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); +int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); +int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi); + +/* ----------------------------------------------------------------------- */ +/* cx25850-ir.c */ +extern const struct v4l2_subdev_ir_ops cx25840_ir_ops; +int cx25840_ir_log_status(struct v4l2_subdev *sd); +int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled); +int cx25840_ir_probe(struct v4l2_subdev *sd); +int cx25840_ir_remove(struct v4l2_subdev *sd); + +#endif diff --git a/drivers/media/i2c/cx25840/cx25840-firmware.c b/drivers/media/i2c/cx25840/cx25840-firmware.c new file mode 100644 index 00000000..b3169f94 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-firmware.c @@ -0,0 +1,175 @@ +/* cx25840 firmware functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +#include "cx25840-core.h" + +/* + * Mike Isely - The FWSEND parameter controls the + * size of the firmware chunks sent down the I2C bus to the chip. + * Previously this had been set to 1024 but unfortunately some I2C + * implementations can't transfer data in such big gulps. + * Specifically, the pvrusb2 driver has a hard limit of around 60 + * bytes, due to the encapsulation there of I2C traffic into USB + * messages. So we have to significantly reduce this parameter. + */ +#define FWSEND 48 + +#define FWDEV(x) &((x)->dev) + +static char *firmware = ""; + +module_param(firmware, charp, 0444); + +MODULE_PARM_DESC(firmware, "Firmware image to load"); + +static void start_fw_load(struct i2c_client *client) +{ + /* DL_ADDR_LB=0 DL_ADDR_HB=0 */ + cx25840_write(client, 0x800, 0x00); + cx25840_write(client, 0x801, 0x00); + // DL_MAP=3 DL_AUTO_INC=0 DL_ENABLE=1 + cx25840_write(client, 0x803, 0x0b); + /* AUTO_INC_DIS=1 */ + cx25840_write(client, 0x000, 0x20); +} + +static void end_fw_load(struct i2c_client *client) +{ + /* AUTO_INC_DIS=0 */ + cx25840_write(client, 0x000, 0x00); + /* DL_ENABLE=0 */ + cx25840_write(client, 0x803, 0x03); +} + +#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw" +#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw" +#define CX25840_FIRMWARE "v4l-cx25840.fw" + +static const char *get_fw_name(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (firmware[0]) + return firmware; + if (is_cx2388x(state)) + return CX2388x_FIRMWARE; + if (is_cx231xx(state)) + return CX231xx_FIRMWARE; + return CX25840_FIRMWARE; +} + +static int check_fw_load(struct i2c_client *client, int size) +{ + /* DL_ADDR_HB DL_ADDR_LB */ + int s = cx25840_read(client, 0x801) << 8; + s |= cx25840_read(client, 0x800); + + if (size != s) { + v4l_err(client, "firmware %s load failed\n", + get_fw_name(client)); + return -EINVAL; + } + + v4l_info(client, "loaded %s firmware (%d bytes)\n", + get_fw_name(client), size); + return 0; +} + +static int fw_write(struct i2c_client *client, const u8 *data, int size) +{ + if (i2c_master_send(client, data, size) < size) { + v4l_err(client, "firmware load i2c failure\n"); + return -ENOSYS; + } + + return 0; +} + +int cx25840_loadfw(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + const struct firmware *fw = NULL; + u8 buffer[FWSEND]; + const u8 *ptr; + const char *fwname = get_fw_name(client); + int size, retval; + int MAX_BUF_SIZE = FWSEND; + u32 gpio_oe = 0, gpio_da = 0; + + if (is_cx2388x(state)) { + /* Preserve the GPIO OE and output bits */ + gpio_oe = cx25840_read(client, 0x160); + gpio_da = cx25840_read(client, 0x164); + } + + if (is_cx231xx(state) && MAX_BUF_SIZE > 16) { + v4l_err(client, " Firmware download size changed to 16 bytes max length\n"); + MAX_BUF_SIZE = 16; /* cx231xx cannot accept more than 16 bytes at a time */ + } + + if (request_firmware(&fw, fwname, FWDEV(client)) != 0) { + v4l_err(client, "unable to open firmware %s\n", fwname); + return -EINVAL; + } + + start_fw_load(client); + + buffer[0] = 0x08; + buffer[1] = 0x02; + + size = fw->size; + ptr = fw->data; + while (size > 0) { + int len = min(MAX_BUF_SIZE - 2, size); + + memcpy(buffer + 2, ptr, len); + + retval = fw_write(client, buffer, len + 2); + + if (retval < 0) { + release_firmware(fw); + return retval; + } + + size -= len; + ptr += len; + } + + end_fw_load(client); + + size = fw->size; + release_firmware(fw); + + if (is_cx2388x(state)) { + /* Restore GPIO configuration after f/w load */ + cx25840_write(client, 0x160, gpio_oe); + cx25840_write(client, 0x164, gpio_da); + } + + return check_fw_load(client, size); +} + +MODULE_FIRMWARE(CX2388x_FIRMWARE); +MODULE_FIRMWARE(CX231xx_FIRMWARE); +MODULE_FIRMWARE(CX25840_FIRMWARE); + diff --git a/drivers/media/i2c/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c new file mode 100644 index 00000000..9ae977b5 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-ir.c @@ -0,0 +1,1279 @@ +/* + * Driver for the Conexant CX2584x Audio/Video decoder chip and related cores + * + * Integrated Consumer Infrared Controller + * + * Copyright (C) 2010 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +#include "cx25840-core.h" + +static unsigned int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable integrated IR debug messages"); + +#define CX25840_IR_REG_BASE 0x200 + +#define CX25840_IR_CNTRL_REG 0x200 +#define CNTRL_WIN_3_3 0x00000000 +#define CNTRL_WIN_4_3 0x00000001 +#define CNTRL_WIN_3_4 0x00000002 +#define CNTRL_WIN_4_4 0x00000003 +#define CNTRL_WIN 0x00000003 +#define CNTRL_EDG_NONE 0x00000000 +#define CNTRL_EDG_FALL 0x00000004 +#define CNTRL_EDG_RISE 0x00000008 +#define CNTRL_EDG_BOTH 0x0000000C +#define CNTRL_EDG 0x0000000C +#define CNTRL_DMD 0x00000010 +#define CNTRL_MOD 0x00000020 +#define CNTRL_RFE 0x00000040 +#define CNTRL_TFE 0x00000080 +#define CNTRL_RXE 0x00000100 +#define CNTRL_TXE 0x00000200 +#define CNTRL_RIC 0x00000400 +#define CNTRL_TIC 0x00000800 +#define CNTRL_CPL 0x00001000 +#define CNTRL_LBM 0x00002000 +#define CNTRL_R 0x00004000 + +#define CX25840_IR_TXCLK_REG 0x204 +#define TXCLK_TCD 0x0000FFFF + +#define CX25840_IR_RXCLK_REG 0x208 +#define RXCLK_RCD 0x0000FFFF + +#define CX25840_IR_CDUTY_REG 0x20C +#define CDUTY_CDC 0x0000000F + +#define CX25840_IR_STATS_REG 0x210 +#define STATS_RTO 0x00000001 +#define STATS_ROR 0x00000002 +#define STATS_RBY 0x00000004 +#define STATS_TBY 0x00000008 +#define STATS_RSR 0x00000010 +#define STATS_TSR 0x00000020 + +#define CX25840_IR_IRQEN_REG 0x214 +#define IRQEN_RTE 0x00000001 +#define IRQEN_ROE 0x00000002 +#define IRQEN_RSE 0x00000010 +#define IRQEN_TSE 0x00000020 +#define IRQEN_MSK 0x00000033 + +#define CX25840_IR_FILTR_REG 0x218 +#define FILTR_LPF 0x0000FFFF + +#define CX25840_IR_FIFO_REG 0x23C +#define FIFO_RXTX 0x0000FFFF +#define FIFO_RXTX_LVL 0x00010000 +#define FIFO_RXTX_RTO 0x0001FFFF +#define FIFO_RX_NDV 0x00020000 +#define FIFO_RX_DEPTH 8 +#define FIFO_TX_DEPTH 8 + +#define CX25840_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */ +#define CX25840_IR_REFCLK_FREQ (CX25840_VIDCLK_FREQ / 2) + +/* + * We use this union internally for convenience, but callers to tx_write + * and rx_read will be expecting records of type struct ir_raw_event. + * Always ensure the size of this union is dictated by struct ir_raw_event. + */ +union cx25840_ir_fifo_rec { + u32 hw_fifo_data; + struct ir_raw_event ir_core_data; +}; + +#define CX25840_IR_RX_KFIFO_SIZE (256 * sizeof(union cx25840_ir_fifo_rec)) +#define CX25840_IR_TX_KFIFO_SIZE (256 * sizeof(union cx25840_ir_fifo_rec)) + +struct cx25840_ir_state { + struct i2c_client *c; + + struct v4l2_subdev_ir_parameters rx_params; + struct mutex rx_params_lock; /* protects Rx parameter settings cache */ + atomic_t rxclk_divider; + atomic_t rx_invert; + + struct kfifo rx_kfifo; + spinlock_t rx_kfifo_lock; /* protect Rx data kfifo */ + + struct v4l2_subdev_ir_parameters tx_params; + struct mutex tx_params_lock; /* protects Tx parameter settings cache */ + atomic_t txclk_divider; +}; + +static inline struct cx25840_ir_state *to_ir_state(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + return state ? state->ir_state : NULL; +} + + +/* + * Rx and Tx Clock Divider register computations + * + * Note the largest clock divider value of 0xffff corresponds to: + * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns + * which fits in 21 bits, so we'll use unsigned int for time arguments. + */ +static inline u16 count_to_clock_divider(unsigned int d) +{ + if (d > RXCLK_RCD + 1) + d = RXCLK_RCD; + else if (d < 2) + d = 1; + else + d--; + return (u16) d; +} + +static inline u16 ns_to_clock_divider(unsigned int ns) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000)); +} + +static inline unsigned int clock_divider_to_ns(unsigned int divider) +{ + /* Period of the Rx or Tx clock in ns */ + return DIV_ROUND_CLOSEST((divider + 1) * 1000, + CX25840_IR_REFCLK_FREQ / 1000000); +} + +static inline u16 carrier_freq_to_clock_divider(unsigned int freq) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * 16)); +} + +static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider) +{ + return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, (divider + 1) * 16); +} + +static inline u16 freq_to_clock_divider(unsigned int freq, + unsigned int rollovers) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * rollovers)); +} + +static inline unsigned int clock_divider_to_freq(unsigned int divider, + unsigned int rollovers) +{ + return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, + (divider + 1) * rollovers); +} + +/* + * Low Pass Filter register calculations + * + * Note the largest count value of 0xffff corresponds to: + * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns + * which fits in 21 bits, so we'll use unsigned int for time arguments. + */ +static inline u16 count_to_lpf_count(unsigned int d) +{ + if (d > FILTR_LPF) + d = FILTR_LPF; + else if (d < 4) + d = 0; + return (u16) d; +} + +static inline u16 ns_to_lpf_count(unsigned int ns) +{ + return count_to_lpf_count( + DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000)); +} + +static inline unsigned int lpf_count_to_ns(unsigned int count) +{ + /* Duration of the Low Pass Filter rejection window in ns */ + return DIV_ROUND_CLOSEST(count * 1000, + CX25840_IR_REFCLK_FREQ / 1000000); +} + +static inline unsigned int lpf_count_to_us(unsigned int count) +{ + /* Duration of the Low Pass Filter rejection window in us */ + return DIV_ROUND_CLOSEST(count, CX25840_IR_REFCLK_FREQ / 1000000); +} + +/* + * FIFO register pulse width count compuations + */ +static u32 clock_divider_to_resolution(u16 divider) +{ + /* + * Resolution is the duration of 1 tick of the readable portion of + * of the pulse width counter as read from the FIFO. The two lsb's are + * not readable, hence the << 2. This function returns ns. + */ + return DIV_ROUND_CLOSEST((1 << 2) * ((u32) divider + 1) * 1000, + CX25840_IR_REFCLK_FREQ / 1000000); +} + +static u64 pulse_width_count_to_ns(u16 count, u16 divider) +{ + u64 n; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not readable, hence + * the (count << 2) | 0x3 + */ + n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */ + rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => ns */ + if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2) + n++; + return n; +} + +#if 0 +/* Keep as we will need this for Transmit functionality */ +static u16 ns_to_pulse_width_count(u32 ns, u16 divider) +{ + u64 n; + u32 d; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not accessible, hence + * the (1 << 2) + */ + n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */ + d = (1 << 2) * ((u32) divider + 1) * 1000; /* millicycles/count */ + rem = do_div(n, d); + if (rem >= d / 2) + n++; + + if (n > FIFO_RXTX) + n = FIFO_RXTX; + else if (n == 0) + n = 1; + return (u16) n; +} + +#endif +static unsigned int pulse_width_count_to_us(u16 count, u16 divider) +{ + u64 n; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not readable, hence + * the (count << 2) | 0x3 + */ + n = (((u64) count << 2) | 0x3) * (divider + 1); /* cycles */ + rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => us */ + if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2) + n++; + return (unsigned int) n; +} + +/* + * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts + * + * The total pulse clock count is an 18 bit pulse width timer count as the most + * significant part and (up to) 16 bit clock divider count as a modulus. + * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse + * width timer count's least significant bit. + */ +static u64 ns_to_pulse_clocks(u32 ns) +{ + u64 clocks; + u32 rem; + clocks = CX25840_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles */ + rem = do_div(clocks, 1000); /* /1000 = cycles */ + if (rem >= 1000 / 2) + clocks++; + return clocks; +} + +static u16 pulse_clocks_to_clock_divider(u64 count) +{ + do_div(count, (FIFO_RXTX << 2) | 0x3); + + /* net result needs to be rounded down and decremented by 1 */ + if (count > RXCLK_RCD + 1) + count = RXCLK_RCD; + else if (count < 2) + count = 1; + else + count--; + return (u16) count; +} + +/* + * IR Control Register helpers + */ +enum tx_fifo_watermark { + TX_FIFO_HALF_EMPTY = 0, + TX_FIFO_EMPTY = CNTRL_TIC, +}; + +enum rx_fifo_watermark { + RX_FIFO_HALF_FULL = 0, + RX_FIFO_NOT_EMPTY = CNTRL_RIC, +}; + +static inline void control_tx_irq_watermark(struct i2c_client *c, + enum tx_fifo_watermark level) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_TIC, level); +} + +static inline void control_rx_irq_watermark(struct i2c_client *c, + enum rx_fifo_watermark level) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_RIC, level); +} + +static inline void control_tx_enable(struct i2c_client *c, bool enable) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE), + enable ? (CNTRL_TXE | CNTRL_TFE) : 0); +} + +static inline void control_rx_enable(struct i2c_client *c, bool enable) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE), + enable ? (CNTRL_RXE | CNTRL_RFE) : 0); +} + +static inline void control_tx_modulation_enable(struct i2c_client *c, + bool enable) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_MOD, + enable ? CNTRL_MOD : 0); +} + +static inline void control_rx_demodulation_enable(struct i2c_client *c, + bool enable) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_DMD, + enable ? CNTRL_DMD : 0); +} + +static inline void control_rx_s_edge_detection(struct i2c_client *c, + u32 edge_types) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_EDG_BOTH, + edge_types & CNTRL_EDG_BOTH); +} + +static void control_rx_s_carrier_window(struct i2c_client *c, + unsigned int carrier, + unsigned int *carrier_range_low, + unsigned int *carrier_range_high) +{ + u32 v; + unsigned int c16 = carrier * 16; + + if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) { + v = CNTRL_WIN_3_4; + *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4); + } else { + v = CNTRL_WIN_3_3; + *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3); + } + + if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) { + v |= CNTRL_WIN_4_3; + *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4); + } else { + v |= CNTRL_WIN_3_3; + *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3); + } + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_WIN, v); +} + +static inline void control_tx_polarity_invert(struct i2c_client *c, + bool invert) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_CPL, + invert ? CNTRL_CPL : 0); +} + +/* + * IR Rx & Tx Clock Register helpers + */ +static unsigned int txclk_tx_s_carrier(struct i2c_client *c, + unsigned int freq, + u16 *divider) +{ + *divider = carrier_freq_to_clock_divider(freq); + cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider); + return clock_divider_to_carrier_freq(*divider); +} + +static unsigned int rxclk_rx_s_carrier(struct i2c_client *c, + unsigned int freq, + u16 *divider) +{ + *divider = carrier_freq_to_clock_divider(freq); + cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider); + return clock_divider_to_carrier_freq(*divider); +} + +static u32 txclk_tx_s_max_pulse_width(struct i2c_client *c, u32 ns, + u16 *divider) +{ + u64 pulse_clocks; + + if (ns > IR_MAX_DURATION) + ns = IR_MAX_DURATION; + pulse_clocks = ns_to_pulse_clocks(ns); + *divider = pulse_clocks_to_clock_divider(pulse_clocks); + cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider); + return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider); +} + +static u32 rxclk_rx_s_max_pulse_width(struct i2c_client *c, u32 ns, + u16 *divider) +{ + u64 pulse_clocks; + + if (ns > IR_MAX_DURATION) + ns = IR_MAX_DURATION; + pulse_clocks = ns_to_pulse_clocks(ns); + *divider = pulse_clocks_to_clock_divider(pulse_clocks); + cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider); + return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider); +} + +/* + * IR Tx Carrier Duty Cycle register helpers + */ +static unsigned int cduty_tx_s_duty_cycle(struct i2c_client *c, + unsigned int duty_cycle) +{ + u32 n; + n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */ + if (n != 0) + n--; + if (n > 15) + n = 15; + cx25840_write4(c, CX25840_IR_CDUTY_REG, n); + return DIV_ROUND_CLOSEST((n + 1) * 100, 16); +} + +/* + * IR Filter Register helpers + */ +static u32 filter_rx_s_min_width(struct i2c_client *c, u32 min_width_ns) +{ + u32 count = ns_to_lpf_count(min_width_ns); + cx25840_write4(c, CX25840_IR_FILTR_REG, count); + return lpf_count_to_ns(count); +} + +/* + * IR IRQ Enable Register helpers + */ +static inline void irqenable_rx(struct v4l2_subdev *sd, u32 mask) +{ + struct cx25840_state *state = to_state(sd); + + if (is_cx23885(state) || is_cx23887(state)) + mask ^= IRQEN_MSK; + mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE); + cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG, + ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask); +} + +static inline void irqenable_tx(struct v4l2_subdev *sd, u32 mask) +{ + struct cx25840_state *state = to_state(sd); + + if (is_cx23885(state) || is_cx23887(state)) + mask ^= IRQEN_MSK; + mask &= IRQEN_TSE; + cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG, ~IRQEN_TSE, mask); +} + +/* + * V4L2 Subdevice IR Ops + */ +int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + struct cx25840_state *state = to_state(sd); + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c = NULL; + unsigned long flags; + + union cx25840_ir_fifo_rec rx_data[FIFO_RX_DEPTH]; + unsigned int i, j, k; + u32 events, v; + int tsr, rsr, rto, ror, tse, rse, rte, roe, kror; + u32 cntrl, irqen, stats; + + *handled = false; + if (ir_state == NULL) + return -ENODEV; + + c = ir_state->c; + + /* Only support the IR controller for the CX2388[57] AV Core for now */ + if (!(is_cx23885(state) || is_cx23887(state))) + return -ENODEV; + + cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG); + irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG); + if (is_cx23885(state) || is_cx23887(state)) + irqen ^= IRQEN_MSK; + stats = cx25840_read4(c, CX25840_IR_STATS_REG); + + tsr = stats & STATS_TSR; /* Tx FIFO Service Request */ + rsr = stats & STATS_RSR; /* Rx FIFO Service Request */ + rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */ + ror = stats & STATS_ROR; /* Rx FIFO Over Run */ + + tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */ + rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */ + rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */ + roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */ + + v4l2_dbg(2, ir_debug, sd, "IR IRQ Status: %s %s %s %s %s %s\n", + tsr ? "tsr" : " ", rsr ? "rsr" : " ", + rto ? "rto" : " ", ror ? "ror" : " ", + stats & STATS_TBY ? "tby" : " ", + stats & STATS_RBY ? "rby" : " "); + + v4l2_dbg(2, ir_debug, sd, "IR IRQ Enables: %s %s %s %s\n", + tse ? "tse" : " ", rse ? "rse" : " ", + rte ? "rte" : " ", roe ? "roe" : " "); + + /* + * Transmitter interrupt service + */ + if (tse && tsr) { + /* + * TODO: + * Check the watermark threshold setting + * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo + * Push the data to the hardware FIFO. + * If there was nothing more to send in the tx_kfifo, disable + * the TSR IRQ and notify the v4l2_device. + * If there was something in the tx_kfifo, check the tx_kfifo + * level and notify the v4l2_device, if it is low. + */ + /* For now, inhibit TSR interrupt until Tx is implemented */ + irqenable_tx(sd, 0); + events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ; + v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events); + *handled = true; + } + + /* + * Receiver interrupt service + */ + kror = 0; + if ((rse && rsr) || (rte && rto)) { + /* + * Receive data on RSR to clear the STATS_RSR. + * Receive data on RTO, since we may not have yet hit the RSR + * watermark when we receive the RTO. + */ + for (i = 0, v = FIFO_RX_NDV; + (v & FIFO_RX_NDV) && !kror; i = 0) { + for (j = 0; + (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) { + v = cx25840_read4(c, CX25840_IR_FIFO_REG); + rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV; + i++; + } + if (i == 0) + break; + j = i * sizeof(union cx25840_ir_fifo_rec); + k = kfifo_in_locked(&ir_state->rx_kfifo, + (unsigned char *) rx_data, j, + &ir_state->rx_kfifo_lock); + if (k != j) + kror++; /* rx_kfifo over run */ + } + *handled = true; + } + + events = 0; + v = 0; + if (kror) { + events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN; + v4l2_err(sd, "IR receiver software FIFO overrun\n"); + } + if (roe && ror) { + /* + * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear + * the Rx FIFO Over Run status (STATS_ROR) + */ + v |= CNTRL_RFE; + events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN; + v4l2_err(sd, "IR receiver hardware FIFO overrun\n"); + } + if (rte && rto) { + /* + * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear + * the Rx Pulse Width Timer Time Out (STATS_RTO) + */ + v |= CNTRL_RXE; + events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED; + } + if (v) { + /* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */ + cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl & ~v); + cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl); + *handled = true; + } + spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags); + if (kfifo_len(&ir_state->rx_kfifo) >= CX25840_IR_RX_KFIFO_SIZE / 2) + events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ; + spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags); + + if (events) + v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events); + return 0; +} + +/* Receiver */ +static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + bool invert; + u16 divider; + unsigned int i, n; + union cx25840_ir_fifo_rec *p; + unsigned u, v, w; + + if (ir_state == NULL) + return -ENODEV; + + invert = (bool) atomic_read(&ir_state->rx_invert); + divider = (u16) atomic_read(&ir_state->rxclk_divider); + + n = count / sizeof(union cx25840_ir_fifo_rec) + * sizeof(union cx25840_ir_fifo_rec); + if (n == 0) { + *num = 0; + return 0; + } + + n = kfifo_out_locked(&ir_state->rx_kfifo, buf, n, + &ir_state->rx_kfifo_lock); + + n /= sizeof(union cx25840_ir_fifo_rec); + *num = n * sizeof(union cx25840_ir_fifo_rec); + + for (p = (union cx25840_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) { + + if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) { + /* Assume RTO was because of no IR light input */ + u = 0; + w = 1; + } else { + u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0; + if (invert) + u = u ? 0 : 1; + w = 0; + } + + v = (unsigned) pulse_width_count_to_ns( + (u16) (p->hw_fifo_data & FIFO_RXTX), divider); + if (v > IR_MAX_DURATION) + v = IR_MAX_DURATION; + + init_ir_raw_event(&p->ir_core_data); + p->ir_core_data.pulse = u; + p->ir_core_data.duration = v; + p->ir_core_data.timeout = w; + + v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns %s %s\n", + v, u ? "mark" : "space", w ? "(timed out)" : ""); + if (w) + v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n"); + } + return 0; +} + +static int cx25840_ir_rx_g_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + + if (ir_state == NULL) + return -ENODEV; + + mutex_lock(&ir_state->rx_params_lock); + memcpy(p, &ir_state->rx_params, + sizeof(struct v4l2_subdev_ir_parameters)); + mutex_unlock(&ir_state->rx_params_lock); + return 0; +} + +static int cx25840_ir_rx_shutdown(struct v4l2_subdev *sd) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c; + + if (ir_state == NULL) + return -ENODEV; + + c = ir_state->c; + mutex_lock(&ir_state->rx_params_lock); + + /* Disable or slow down all IR Rx circuits and counters */ + irqenable_rx(sd, 0); + control_rx_enable(c, false); + control_rx_demodulation_enable(c, false); + control_rx_s_edge_detection(c, CNTRL_EDG_NONE); + filter_rx_s_min_width(c, 0); + cx25840_write4(c, CX25840_IR_RXCLK_REG, RXCLK_RCD); + + ir_state->rx_params.shutdown = true; + + mutex_unlock(&ir_state->rx_params_lock); + return 0; +} + +static int cx25840_ir_rx_s_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c; + struct v4l2_subdev_ir_parameters *o; + u16 rxclk_divider; + + if (ir_state == NULL) + return -ENODEV; + + if (p->shutdown) + return cx25840_ir_rx_shutdown(sd); + + if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH) + return -ENOSYS; + + c = ir_state->c; + o = &ir_state->rx_params; + + mutex_lock(&ir_state->rx_params_lock); + + o->shutdown = p->shutdown; + + p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + o->mode = p->mode; + + p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec); + o->bytes_per_data_element = p->bytes_per_data_element; + + /* Before we tweak the hardware, we have to disable the receiver */ + irqenable_rx(sd, 0); + control_rx_enable(c, false); + + control_rx_demodulation_enable(c, p->modulation); + o->modulation = p->modulation; + + if (p->modulation) { + p->carrier_freq = rxclk_rx_s_carrier(c, p->carrier_freq, + &rxclk_divider); + + o->carrier_freq = p->carrier_freq; + + p->duty_cycle = 50; + o->duty_cycle = p->duty_cycle; + + control_rx_s_carrier_window(c, p->carrier_freq, + &p->carrier_range_lower, + &p->carrier_range_upper); + o->carrier_range_lower = p->carrier_range_lower; + o->carrier_range_upper = p->carrier_range_upper; + + p->max_pulse_width = + (u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider); + } else { + p->max_pulse_width = + rxclk_rx_s_max_pulse_width(c, p->max_pulse_width, + &rxclk_divider); + } + o->max_pulse_width = p->max_pulse_width; + atomic_set(&ir_state->rxclk_divider, rxclk_divider); + + p->noise_filter_min_width = + filter_rx_s_min_width(c, p->noise_filter_min_width); + o->noise_filter_min_width = p->noise_filter_min_width; + + p->resolution = clock_divider_to_resolution(rxclk_divider); + o->resolution = p->resolution; + + /* FIXME - make this dependent on resolution for better performance */ + control_rx_irq_watermark(c, RX_FIFO_HALF_FULL); + + control_rx_s_edge_detection(c, CNTRL_EDG_BOTH); + + o->invert_level = p->invert_level; + atomic_set(&ir_state->rx_invert, p->invert_level); + + o->interrupt_enable = p->interrupt_enable; + o->enable = p->enable; + if (p->enable) { + unsigned long flags; + + spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags); + kfifo_reset(&ir_state->rx_kfifo); + spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags); + if (p->interrupt_enable) + irqenable_rx(sd, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE); + control_rx_enable(c, p->enable); + } + + mutex_unlock(&ir_state->rx_params_lock); + return 0; +} + +/* Transmitter */ +static int cx25840_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + + if (ir_state == NULL) + return -ENODEV; + +#if 0 + /* + * FIXME - the code below is an incomplete and untested sketch of what + * may need to be done. The critical part is to get 4 (or 8) pulses + * from the tx_kfifo, or converted from ns to the proper units from the + * input, and push them off to the hardware Tx FIFO right away, if the + * HW TX fifo needs service. The rest can be pushed to the tx_kfifo in + * a less critical timeframe. Also watch out for overruning the + * tx_kfifo - don't let it happen and let the caller know not all his + * pulses were written. + */ + u32 *ns_pulse = (u32 *) buf; + unsigned int n; + u32 fifo_pulse[FIFO_TX_DEPTH]; + u32 mark; + + /* Compute how much we can fit in the tx kfifo */ + n = CX25840_IR_TX_KFIFO_SIZE - kfifo_len(ir_state->tx_kfifo); + n = min(n, (unsigned int) count); + n /= sizeof(u32); + + /* FIXME - turn on Tx Fifo service interrupt + * check hardware fifo level, and other stuff + */ + for (i = 0; i < n; ) { + for (j = 0; j < FIFO_TX_DEPTH / 2 && i < n; j++) { + mark = ns_pulse[i] & LEVEL_MASK; + fifo_pulse[j] = ns_to_pulse_width_count( + ns_pulse[i] & + ~LEVEL_MASK, + ir_state->txclk_divider); + if (mark) + fifo_pulse[j] &= FIFO_RXTX_LVL; + i++; + } + kfifo_put(ir_state->tx_kfifo, (u8 *) fifo_pulse, + j * sizeof(u32)); + } + *num = n * sizeof(u32); +#else + /* For now enable the Tx FIFO Service interrupt & pretend we did work */ + irqenable_tx(sd, IRQEN_TSE); + *num = count; +#endif + return 0; +} + +static int cx25840_ir_tx_g_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + + if (ir_state == NULL) + return -ENODEV; + + mutex_lock(&ir_state->tx_params_lock); + memcpy(p, &ir_state->tx_params, + sizeof(struct v4l2_subdev_ir_parameters)); + mutex_unlock(&ir_state->tx_params_lock); + return 0; +} + +static int cx25840_ir_tx_shutdown(struct v4l2_subdev *sd) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c; + + if (ir_state == NULL) + return -ENODEV; + + c = ir_state->c; + mutex_lock(&ir_state->tx_params_lock); + + /* Disable or slow down all IR Tx circuits and counters */ + irqenable_tx(sd, 0); + control_tx_enable(c, false); + control_tx_modulation_enable(c, false); + cx25840_write4(c, CX25840_IR_TXCLK_REG, TXCLK_TCD); + + ir_state->tx_params.shutdown = true; + + mutex_unlock(&ir_state->tx_params_lock); + return 0; +} + +static int cx25840_ir_tx_s_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c; + struct v4l2_subdev_ir_parameters *o; + u16 txclk_divider; + + if (ir_state == NULL) + return -ENODEV; + + if (p->shutdown) + return cx25840_ir_tx_shutdown(sd); + + if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH) + return -ENOSYS; + + c = ir_state->c; + o = &ir_state->tx_params; + mutex_lock(&ir_state->tx_params_lock); + + o->shutdown = p->shutdown; + + p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + o->mode = p->mode; + + p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec); + o->bytes_per_data_element = p->bytes_per_data_element; + + /* Before we tweak the hardware, we have to disable the transmitter */ + irqenable_tx(sd, 0); + control_tx_enable(c, false); + + control_tx_modulation_enable(c, p->modulation); + o->modulation = p->modulation; + + if (p->modulation) { + p->carrier_freq = txclk_tx_s_carrier(c, p->carrier_freq, + &txclk_divider); + o->carrier_freq = p->carrier_freq; + + p->duty_cycle = cduty_tx_s_duty_cycle(c, p->duty_cycle); + o->duty_cycle = p->duty_cycle; + + p->max_pulse_width = + (u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider); + } else { + p->max_pulse_width = + txclk_tx_s_max_pulse_width(c, p->max_pulse_width, + &txclk_divider); + } + o->max_pulse_width = p->max_pulse_width; + atomic_set(&ir_state->txclk_divider, txclk_divider); + + p->resolution = clock_divider_to_resolution(txclk_divider); + o->resolution = p->resolution; + + /* FIXME - make this dependent on resolution for better performance */ + control_tx_irq_watermark(c, TX_FIFO_HALF_EMPTY); + + control_tx_polarity_invert(c, p->invert_carrier_sense); + o->invert_carrier_sense = p->invert_carrier_sense; + + /* + * FIXME: we don't have hardware help for IO pin level inversion + * here like we have on the CX23888. + * Act on this with some mix of logical inversion of data levels, + * carrier polarity, and carrier duty cycle. + */ + o->invert_level = p->invert_level; + + o->interrupt_enable = p->interrupt_enable; + o->enable = p->enable; + if (p->enable) { + /* reset tx_fifo here */ + if (p->interrupt_enable) + irqenable_tx(sd, IRQEN_TSE); + control_tx_enable(c, p->enable); + } + + mutex_unlock(&ir_state->tx_params_lock); + return 0; +} + + +/* + * V4L2 Subdevice Core Ops support + */ +int cx25840_ir_log_status(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *c = state->c; + char *s; + int i, j; + u32 cntrl, txclk, rxclk, cduty, stats, irqen, filtr; + + /* The CX23888 chip doesn't have an IR controller on the A/V core */ + if (is_cx23888(state)) + return 0; + + cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG); + txclk = cx25840_read4(c, CX25840_IR_TXCLK_REG) & TXCLK_TCD; + rxclk = cx25840_read4(c, CX25840_IR_RXCLK_REG) & RXCLK_RCD; + cduty = cx25840_read4(c, CX25840_IR_CDUTY_REG) & CDUTY_CDC; + stats = cx25840_read4(c, CX25840_IR_STATS_REG); + irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG); + if (is_cx23885(state) || is_cx23887(state)) + irqen ^= IRQEN_MSK; + filtr = cx25840_read4(c, CX25840_IR_FILTR_REG) & FILTR_LPF; + + v4l2_info(sd, "IR Receiver:\n"); + v4l2_info(sd, "\tEnabled: %s\n", + cntrl & CNTRL_RXE ? "yes" : "no"); + v4l2_info(sd, "\tDemodulation from a carrier: %s\n", + cntrl & CNTRL_DMD ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO: %s\n", + cntrl & CNTRL_RFE ? "enabled" : "disabled"); + switch (cntrl & CNTRL_EDG) { + case CNTRL_EDG_NONE: + s = "disabled"; + break; + case CNTRL_EDG_FALL: + s = "falling edge"; + break; + case CNTRL_EDG_RISE: + s = "rising edge"; + break; + case CNTRL_EDG_BOTH: + s = "rising & falling edges"; + break; + default: + s = "??? edge"; + break; + } + v4l2_info(sd, "\tPulse timers' start/stop trigger: %s\n", s); + v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n", + cntrl & CNTRL_R ? "not loaded" : "overflow marker"); + v4l2_info(sd, "\tFIFO interrupt watermark: %s\n", + cntrl & CNTRL_RIC ? "not empty" : "half full or greater"); + v4l2_info(sd, "\tLoopback mode: %s\n", + cntrl & CNTRL_LBM ? "loopback active" : "normal receive"); + if (cntrl & CNTRL_DMD) { + v4l2_info(sd, "\tExpected carrier (16 clocks): %u Hz\n", + clock_divider_to_carrier_freq(rxclk)); + switch (cntrl & CNTRL_WIN) { + case CNTRL_WIN_3_3: + i = 3; + j = 3; + break; + case CNTRL_WIN_4_3: + i = 4; + j = 3; + break; + case CNTRL_WIN_3_4: + i = 3; + j = 4; + break; + case CNTRL_WIN_4_4: + i = 4; + j = 4; + break; + default: + i = 0; + j = 0; + break; + } + v4l2_info(sd, "\tNext carrier edge window: 16 clocks " + "-%1d/+%1d, %u to %u Hz\n", i, j, + clock_divider_to_freq(rxclk, 16 + j), + clock_divider_to_freq(rxclk, 16 - i)); + } + v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n", + pulse_width_count_to_us(FIFO_RXTX, rxclk), + pulse_width_count_to_ns(FIFO_RXTX, rxclk)); + v4l2_info(sd, "\tLow pass filter: %s\n", + filtr ? "enabled" : "disabled"); + if (filtr) + v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, " + "%u ns\n", + lpf_count_to_us(filtr), + lpf_count_to_ns(filtr)); + v4l2_info(sd, "\tPulse width timer timed-out: %s\n", + stats & STATS_RTO ? "yes" : "no"); + v4l2_info(sd, "\tPulse width timer time-out intr: %s\n", + irqen & IRQEN_RTE ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO overrun: %s\n", + stats & STATS_ROR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO overrun interrupt: %s\n", + irqen & IRQEN_ROE ? "enabled" : "disabled"); + v4l2_info(sd, "\tBusy: %s\n", + stats & STATS_RBY ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service requested: %s\n", + stats & STATS_RSR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service request interrupt: %s\n", + irqen & IRQEN_RSE ? "enabled" : "disabled"); + + v4l2_info(sd, "IR Transmitter:\n"); + v4l2_info(sd, "\tEnabled: %s\n", + cntrl & CNTRL_TXE ? "yes" : "no"); + v4l2_info(sd, "\tModulation onto a carrier: %s\n", + cntrl & CNTRL_MOD ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO: %s\n", + cntrl & CNTRL_TFE ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO interrupt watermark: %s\n", + cntrl & CNTRL_TIC ? "not empty" : "half full or less"); + v4l2_info(sd, "\tCarrier polarity: %s\n", + cntrl & CNTRL_CPL ? "space:burst mark:noburst" + : "space:noburst mark:burst"); + if (cntrl & CNTRL_MOD) { + v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n", + clock_divider_to_carrier_freq(txclk)); + v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n", + cduty + 1); + } + v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n", + pulse_width_count_to_us(FIFO_RXTX, txclk), + pulse_width_count_to_ns(FIFO_RXTX, txclk)); + v4l2_info(sd, "\tBusy: %s\n", + stats & STATS_TBY ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service requested: %s\n", + stats & STATS_TSR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service request interrupt: %s\n", + irqen & IRQEN_TSE ? "enabled" : "disabled"); + + return 0; +} + + +const struct v4l2_subdev_ir_ops cx25840_ir_ops = { + .rx_read = cx25840_ir_rx_read, + .rx_g_parameters = cx25840_ir_rx_g_parameters, + .rx_s_parameters = cx25840_ir_rx_s_parameters, + + .tx_write = cx25840_ir_tx_write, + .tx_g_parameters = cx25840_ir_tx_g_parameters, + .tx_s_parameters = cx25840_ir_tx_s_parameters, +}; + + +static const struct v4l2_subdev_ir_parameters default_rx_params = { + .bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec), + .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, + + .enable = false, + .interrupt_enable = false, + .shutdown = true, + + .modulation = true, + .carrier_freq = 36000, /* 36 kHz - RC-5, and RC-6 carrier */ + + /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */ + /* RC-6: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */ + .noise_filter_min_width = 333333, /* ns */ + .carrier_range_lower = 35000, + .carrier_range_upper = 37000, + .invert_level = false, +}; + +static const struct v4l2_subdev_ir_parameters default_tx_params = { + .bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec), + .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, + + .enable = false, + .interrupt_enable = false, + .shutdown = true, + + .modulation = true, + .carrier_freq = 36000, /* 36 kHz - RC-5 carrier */ + .duty_cycle = 25, /* 25 % - RC-5 carrier */ + .invert_level = false, + .invert_carrier_sense = false, +}; + +int cx25840_ir_probe(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct cx25840_ir_state *ir_state; + struct v4l2_subdev_ir_parameters default_params; + + /* Only init the IR controller for the CX2388[57] AV Core for now */ + if (!(is_cx23885(state) || is_cx23887(state))) + return 0; + + ir_state = kzalloc(sizeof(struct cx25840_ir_state), GFP_KERNEL); + if (ir_state == NULL) + return -ENOMEM; + + spin_lock_init(&ir_state->rx_kfifo_lock); + if (kfifo_alloc(&ir_state->rx_kfifo, + CX25840_IR_RX_KFIFO_SIZE, GFP_KERNEL)) { + kfree(ir_state); + return -ENOMEM; + } + + ir_state->c = state->c; + state->ir_state = ir_state; + + /* Ensure no interrupts arrive yet */ + if (is_cx23885(state) || is_cx23887(state)) + cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, IRQEN_MSK); + else + cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, 0); + + mutex_init(&ir_state->rx_params_lock); + default_params = default_rx_params; + v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params); + + mutex_init(&ir_state->tx_params_lock); + default_params = default_tx_params; + v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params); + + return 0; +} + +int cx25840_ir_remove(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct cx25840_ir_state *ir_state = to_ir_state(sd); + + if (ir_state == NULL) + return -ENODEV; + + cx25840_ir_rx_shutdown(sd); + cx25840_ir_tx_shutdown(sd); + + kfifo_free(&ir_state->rx_kfifo); + kfree(ir_state); + state->ir_state = NULL; + return 0; +} diff --git a/drivers/media/i2c/cx25840/cx25840-vbi.c b/drivers/media/i2c/cx25840/cx25840-vbi.c new file mode 100644 index 00000000..c39e91dc --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-vbi.c @@ -0,0 +1,257 @@ +/* cx25840 VBI functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include +#include + +#include "cx25840-core.h" + +static int odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static int decode_vps(u8 * dst, u8 * p) +{ + static const u8 biphase_tbl[] = { + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, + 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, + 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, + 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, + 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, + 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, + 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + }; + + u8 c, err = 0; + int i; + + for (i = 0; i < 2 * 13; i += 2) { + err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; + c = (biphase_tbl[p[i + 1]] & 0xf) | + ((biphase_tbl[p[i]] & 0xf) << 4); + dst[i / 2] = c; + } + + return err & 0xf0; +} + +int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + static const u16 lcr2vbi[] = { + 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_WSS_625, 0, /* 4 */ + V4L2_SLICED_CAPTION_525, /* 6 */ + 0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */ + 0, 0, 0, 0 + }; + int is_pal = !(state->std & V4L2_STD_525_60); + int i; + + memset(svbi->service_lines, 0, sizeof(svbi->service_lines)); + svbi->service_set = 0; + /* we're done if raw VBI is active */ + if ((cx25840_read(client, 0x404) & 0x10) == 0) + return 0; + + if (is_pal) { + for (i = 7; i <= 23; i++) { + u8 v = cx25840_read(client, 0x424 + i - 7); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= svbi->service_lines[0][i] | + svbi->service_lines[1][i]; + } + } else { + for (i = 10; i <= 21; i++) { + u8 v = cx25840_read(client, 0x424 + i - 10); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= svbi->service_lines[0][i] | + svbi->service_lines[1][i]; + } + } + return 0; +} + +int cx25840_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + int is_pal = !(state->std & V4L2_STD_525_60); + int vbi_offset = is_pal ? 1 : 0; + + /* Setup standard */ + cx25840_std_setup(client); + + /* VBI Offset */ + cx25840_write(client, 0x47f, vbi_offset); + cx25840_write(client, 0x404, 0x2e); + return 0; +} + +int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + int is_pal = !(state->std & V4L2_STD_525_60); + int vbi_offset = is_pal ? 1 : 0; + int i, x; + u8 lcr[24]; + + for (x = 0; x <= 23; x++) + lcr[x] = 0x00; + + /* Setup standard */ + cx25840_std_setup(client); + + /* Sliced VBI */ + cx25840_write(client, 0x404, 0x32); /* Ancillary data */ + cx25840_write(client, 0x406, 0x13); + cx25840_write(client, 0x47f, vbi_offset); + + if (is_pal) { + for (i = 0; i <= 6; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } else { + for (i = 0; i <= 9; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + + for (i = 22; i <= 23; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } + + for (i = 7; i <= 23; i++) { + for (x = 0; x <= 1; x++) { + switch (svbi->service_lines[1-x][i]) { + case V4L2_SLICED_TELETEXT_B: + lcr[i] |= 1 << (4 * x); + break; + case V4L2_SLICED_WSS_625: + lcr[i] |= 4 << (4 * x); + break; + case V4L2_SLICED_CAPTION_525: + lcr[i] |= 6 << (4 * x); + break; + case V4L2_SLICED_VPS: + lcr[i] |= 9 << (4 * x); + break; + } + } + } + + if (is_pal) { + for (x = 1, i = 0x424; i <= 0x434; i++, x++) + cx25840_write(client, i, lcr[6 + x]); + } else { + for (x = 1, i = 0x424; i <= 0x430; i++, x++) + cx25840_write(client, i, lcr[9 + x]); + for (i = 0x431; i <= 0x434; i++) + cx25840_write(client, i, 0); + } + + cx25840_write(client, 0x43c, 0x16); + cx25840_write(client, 0x474, is_pal ? 0x2a : 0x22); + return 0; +} + +int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi) +{ + struct cx25840_state *state = to_state(sd); + u8 *p = vbi->p; + int id1, id2, l, err = 0; + + if (p[0] || p[1] != 0xff || p[2] != 0xff || + (p[3] != 0x55 && p[3] != 0x91)) { + vbi->line = vbi->type = 0; + return 0; + } + + p += 4; + id1 = p[-1]; + id2 = p[0] & 0xf; + l = p[2] & 0x3f; + l += state->vbi_line_offset; + p += 4; + + switch (id2) { + case 1: + id2 = V4L2_SLICED_TELETEXT_B; + break; + case 4: + id2 = V4L2_SLICED_WSS_625; + break; + case 6: + id2 = V4L2_SLICED_CAPTION_525; + err = !odd_parity(p[0]) || !odd_parity(p[1]); + break; + case 9: + id2 = V4L2_SLICED_VPS; + if (decode_vps(p, p) != 0) + err = 1; + break; + default: + id2 = 0; + err = 1; + break; + } + + vbi->type = err ? 0 : id2; + vbi->line = err ? 0 : l; + vbi->is_second_field = err ? 0 : (id1 == 0x55); + vbi->p = p; + return 0; +} diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c new file mode 100644 index 00000000..8e2f79cb --- /dev/null +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -0,0 +1,501 @@ +/* + * + * keyboard input driver for i2c IR remote controls + * + * Copyright (c) 2000-2003 Gerd Knorr + * modified for PixelView (BT878P+W/FM) by + * Michal Kochanowicz + * Christoph Bartelmus + * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by + * Ulrich Mueller + * modified for em2820 based USB TV tuners by + * Markus Rechberger + * modified for DViCO Fusion HDTV 5 RT GOLD by + * Chaogui Zhang + * modified for MSI TV@nywhere Plus by + * Henry Wong + * Mark Schultz + * Brian Rogers + * modified for AVerMedia Cardbus by + * Oldrich Jedlicka + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* ----------------------------------------------------------------------- */ +/* insmod parameters */ + +static int debug; +module_param(debug, int, 0644); /* debug level (0,1,2) */ + + +#define MODULE_NAME "ir-kbd-i2c" +#define dprintk(level, fmt, arg...) if (debug >= level) \ + printk(KERN_DEBUG MODULE_NAME ": " fmt , ## arg) + +/* ----------------------------------------------------------------------- */ + +static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, + int size, int offset) +{ + unsigned char buf[6]; + int start, range, toggle, dev, code, ircode; + + /* poll IR chip */ + if (size != i2c_master_recv(ir->c, buf, size)) + return -EIO; + + /* split rc5 data block ... */ + start = (buf[offset] >> 7) & 1; + range = (buf[offset] >> 6) & 1; + toggle = (buf[offset] >> 5) & 1; + dev = buf[offset] & 0x1f; + code = (buf[offset+1] >> 2) & 0x3f; + + /* rc5 has two start bits + * the first bit must be one + * the second bit defines the command range (1 = 0-63, 0 = 64 - 127) + */ + if (!start) + /* no key pressed */ + return 0; + /* + * Hauppauge remotes (black/silver) always use + * specific device ids. If we do not filter the + * device ids then messages destined for devices + * such as TVs (id=0) will get through causing + * mis-fired events. + * + * We also filter out invalid key presses which + * produce annoying debug log entries. + */ + ircode= (start << 12) | (toggle << 11) | (dev << 6) | code; + if ((ircode & 0x1fff)==0x1fff) + /* invalid key press */ + return 0; + + if (!range) + code += 64; + + dprintk(1,"ir hauppauge (rc5): s%d r%d t%d dev=%d code=%d\n", + start, range, toggle, dev, code); + + /* return key */ + *ir_key = (dev << 8) | code; + *ir_raw = ircode; + return 1; +} + +static int get_key_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + return get_key_haup_common (ir, ir_key, ir_raw, 3, 0); +} + +static int get_key_haup_xvr(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + int ret; + unsigned char buf[1] = { 0 }; + + /* + * This is the same apparent "are you ready?" poll command observed + * watching Windows driver traffic and implemented in lirc_zilog. With + * this added, we get far saner remote behavior with z8 chips on usb + * connected devices, even with the default polling interval of 100ms. + */ + ret = i2c_master_send(ir->c, buf, 1); + if (ret != 1) + return (ret < 0) ? ret : -EINVAL; + + return get_key_haup_common (ir, ir_key, ir_raw, 6, 3); +} + +static int get_key_pixelview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(ir->c, &b, 1)) { + dprintk(1,"read error\n"); + return -EIO; + } + *ir_key = b; + *ir_raw = b; + return 1; +} + +static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char buf[4]; + + /* poll IR chip */ + if (4 != i2c_master_recv(ir->c, buf, 4)) { + dprintk(1,"read error\n"); + return -EIO; + } + + if(buf[0] !=0 || buf[1] !=0 || buf[2] !=0 || buf[3] != 0) + dprintk(2, "%s: 0x%2x 0x%2x 0x%2x 0x%2x\n", __func__, + buf[0], buf[1], buf[2], buf[3]); + + /* no key pressed or signal from other ir remote */ + if(buf[0] != 0x1 || buf[1] != 0xfe) + return 0; + + *ir_key = buf[2]; + *ir_raw = (buf[2] << 8) | buf[3]; + + return 1; +} + +static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(ir->c, &b, 1)) { + dprintk(1,"read error\n"); + return -EIO; + } + + /* it seems that 0xFE indicates that a button is still hold + down, while 0xff indicates that no button is hold + down. 0xfe sequences are sometimes interrupted by 0xFF */ + + dprintk(2,"key %02x\n", b); + + if (b == 0xff) + return 0; + + if (b == 0xfe) + /* keep old data */ + return 1; + + *ir_key = b; + *ir_raw = b; + return 1; +} + +static int get_key_avermedia_cardbus(struct IR_i2c *ir, + u32 *ir_key, u32 *ir_raw) +{ + unsigned char subaddr, key, keygroup; + struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, + .buf = &subaddr, .len = 1}, + { .addr = ir->c->addr, .flags = I2C_M_RD, + .buf = &key, .len = 1} }; + subaddr = 0x0d; + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { + dprintk(1, "read error\n"); + return -EIO; + } + + if (key == 0xff) + return 0; + + subaddr = 0x0b; + msg[1].buf = &keygroup; + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { + dprintk(1, "read error\n"); + return -EIO; + } + + if (keygroup == 0xff) + return 0; + + dprintk(1, "read key 0x%02x/0x%02x\n", key, keygroup); + if (keygroup < 2 || keygroup > 4) { + /* Only a warning */ + dprintk(1, "warning: invalid key group 0x%02x for key 0x%02x\n", + keygroup, key); + } + key |= (keygroup & 1) << 6; + + *ir_key = key; + *ir_raw = key; + if (!strcmp(ir->ir_codes, RC_MAP_AVERMEDIA_M733A_RM_K6)) { + *ir_key |= keygroup << 8; + *ir_raw |= keygroup << 8; + } + return 1; +} + +/* ----------------------------------------------------------------------- */ + +static int ir_key_poll(struct IR_i2c *ir) +{ + static u32 ir_key, ir_raw; + int rc; + + dprintk(3, "%s\n", __func__); + rc = ir->get_key(ir, &ir_key, &ir_raw); + if (rc < 0) { + dprintk(2,"error\n"); + return rc; + } + + if (rc) { + dprintk(1, "%s: keycode = 0x%04x\n", __func__, ir_key); + rc_keydown(ir->rc, ir_key, 0); + } + return 0; +} + +static void ir_work(struct work_struct *work) +{ + int rc; + struct IR_i2c *ir = container_of(work, struct IR_i2c, work.work); + + rc = ir_key_poll(ir); + if (rc == -ENODEV) { + rc_unregister_device(ir->rc); + ir->rc = NULL; + return; + } + + schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling_interval)); +} + +/* ----------------------------------------------------------------------- */ + +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + char *ir_codes = NULL; + const char *name = NULL; + u64 rc_type = RC_BIT_UNKNOWN; + struct IR_i2c *ir; + struct rc_dev *rc = NULL; + struct i2c_adapter *adap = client->adapter; + unsigned short addr = client->addr; + int err; + + ir = kzalloc(sizeof(struct IR_i2c), GFP_KERNEL); + if (!ir) + return -ENOMEM; + + ir->c = client; + ir->polling_interval = DEFAULT_POLLING_INTERVAL; + i2c_set_clientdata(client, ir); + + switch(addr) { + case 0x64: + name = "Pixelview"; + ir->get_key = get_key_pixelview; + rc_type = RC_BIT_OTHER; + ir_codes = RC_MAP_EMPTY; + break; + case 0x18: + case 0x1f: + case 0x1a: + name = "Hauppauge"; + ir->get_key = get_key_haup; + rc_type = RC_BIT_RC5; + ir_codes = RC_MAP_HAUPPAUGE; + break; + case 0x30: + name = "KNC One"; + ir->get_key = get_key_knc1; + rc_type = RC_BIT_OTHER; + ir_codes = RC_MAP_EMPTY; + break; + case 0x6b: + name = "FusionHDTV"; + ir->get_key = get_key_fusionhdtv; + rc_type = RC_BIT_RC5; + ir_codes = RC_MAP_FUSIONHDTV_MCE; + break; + case 0x40: + name = "AVerMedia Cardbus remote"; + ir->get_key = get_key_avermedia_cardbus; + rc_type = RC_BIT_OTHER; + ir_codes = RC_MAP_AVERMEDIA_CARDBUS; + break; + case 0x41: + name = "AVerMedia EM78P153"; + ir->get_key = get_key_avermedia_cardbus; + rc_type = RC_BIT_OTHER; + /* RM-KV remote, seems to be same as RM-K6 */ + ir_codes = RC_MAP_AVERMEDIA_M733A_RM_K6; + break; + case 0x71: + name = "Hauppauge/Zilog Z8"; + ir->get_key = get_key_haup_xvr; + rc_type = RC_BIT_RC5; + ir_codes = RC_MAP_HAUPPAUGE; + break; + } + + /* Let the caller override settings */ + if (client->dev.platform_data) { + const struct IR_i2c_init_data *init_data = + client->dev.platform_data; + + ir_codes = init_data->ir_codes; + rc = init_data->rc_dev; + + name = init_data->name; + if (init_data->type) + rc_type = init_data->type; + + if (init_data->polling_interval) + ir->polling_interval = init_data->polling_interval; + + switch (init_data->internal_get_key_func) { + case IR_KBD_GET_KEY_CUSTOM: + /* The bridge driver provided us its own function */ + ir->get_key = init_data->get_key; + break; + case IR_KBD_GET_KEY_PIXELVIEW: + ir->get_key = get_key_pixelview; + break; + case IR_KBD_GET_KEY_HAUP: + ir->get_key = get_key_haup; + break; + case IR_KBD_GET_KEY_KNC1: + ir->get_key = get_key_knc1; + break; + case IR_KBD_GET_KEY_FUSIONHDTV: + ir->get_key = get_key_fusionhdtv; + break; + case IR_KBD_GET_KEY_HAUP_XVR: + ir->get_key = get_key_haup_xvr; + break; + case IR_KBD_GET_KEY_AVERMEDIA_CARDBUS: + ir->get_key = get_key_avermedia_cardbus; + break; + } + } + + if (!rc) { + /* + * If platform_data doesn't specify rc_dev, initilize it + * internally + */ + rc = rc_allocate_device(); + if (!rc) { + err = -ENOMEM; + goto err_out_free; + } + } + ir->rc = rc; + + /* Make sure we are all setup before going on */ + if (!name || !ir->get_key || !rc_type || !ir_codes) { + dprintk(1, ": Unsupported device at address 0x%02x\n", + addr); + err = -ENODEV; + goto err_out_free; + } + + /* Sets name */ + snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name); + ir->ir_codes = ir_codes; + + snprintf(ir->phys, sizeof(ir->phys), "%s/%s/ir0", + dev_name(&adap->dev), + dev_name(&client->dev)); + + /* + * Initialize input_dev fields + * It doesn't make sense to allow overriding them via platform_data + */ + rc->input_id.bustype = BUS_I2C; + rc->input_phys = ir->phys; + rc->input_name = ir->name; + + /* + * Initialize the other fields of rc_dev + */ + rc->map_name = ir->ir_codes; + rc->allowed_protos = rc_type; + rc->enabled_protocols = rc_type; + if (!rc->driver_name) + rc->driver_name = MODULE_NAME; + + err = rc_register_device(rc); + if (err) + goto err_out_free; + + printk(MODULE_NAME ": %s detected at %s [%s]\n", + ir->name, ir->phys, adap->name); + + /* start polling via eventd */ + INIT_DELAYED_WORK(&ir->work, ir_work); + schedule_delayed_work(&ir->work, 0); + + return 0; + + err_out_free: + /* Only frees rc if it were allocated internally */ + rc_free_device(rc); + kfree(ir); + return err; +} + +static int ir_remove(struct i2c_client *client) +{ + struct IR_i2c *ir = i2c_get_clientdata(client); + + /* kill outstanding polls */ + cancel_delayed_work_sync(&ir->work); + + /* unregister device */ + if (ir->rc) + rc_unregister_device(ir->rc); + + /* free memory */ + kfree(ir); + return 0; +} + +static const struct i2c_device_id ir_kbd_id[] = { + /* Generic entry for any IR receiver */ + { "ir_video", 0 }, + /* IR device specific entries should be added here */ + { "ir_rx_z8f0811_haup", 0 }, + { "ir_rx_z8f0811_hdpvr", 0 }, + { } +}; + +static struct i2c_driver ir_kbd_driver = { + .driver = { + .name = "ir-kbd-i2c", + }, + .probe = ir_probe, + .remove = ir_remove, + .id_table = ir_kbd_id, +}; + +module_i2c_driver(ir_kbd_driver); + +/* ----------------------------------------------------------------------- */ + +MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller"); +MODULE_DESCRIPTION("input driver for i2c IR remote controls"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/ks0127.c b/drivers/media/i2c/ks0127.c new file mode 100644 index 00000000..04a6efa3 --- /dev/null +++ b/drivers/media/i2c/ks0127.c @@ -0,0 +1,733 @@ +/* + * Video Capture Driver (Video for Linux 1/2) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ***************************************************************************** + * + * Modified and extended by + * Mike Bernson + * Gerard v.d. Horst + * Leon van Stuivenberg + * Gernot Ziegler + * + * Version History: + * V1.0 Ryan Drake Initial version by Ryan Drake + * V1.1 Gerard v.d. Horst Added some debugoutput, reset the video-standard + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ks0127.h" + +MODULE_DESCRIPTION("KS0127 video decoder driver"); +MODULE_AUTHOR("Ryan Drake"); +MODULE_LICENSE("GPL"); + +/* Addresses */ +#define I2C_KS0127_ADDON 0xD8 +#define I2C_KS0127_ONBOARD 0xDA + + +/* ks0127 control registers */ +#define KS_STAT 0x00 +#define KS_CMDA 0x01 +#define KS_CMDB 0x02 +#define KS_CMDC 0x03 +#define KS_CMDD 0x04 +#define KS_HAVB 0x05 +#define KS_HAVE 0x06 +#define KS_HS1B 0x07 +#define KS_HS1E 0x08 +#define KS_HS2B 0x09 +#define KS_HS2E 0x0a +#define KS_AGC 0x0b +#define KS_HXTRA 0x0c +#define KS_CDEM 0x0d +#define KS_PORTAB 0x0e +#define KS_LUMA 0x0f +#define KS_CON 0x10 +#define KS_BRT 0x11 +#define KS_CHROMA 0x12 +#define KS_CHROMB 0x13 +#define KS_DEMOD 0x14 +#define KS_SAT 0x15 +#define KS_HUE 0x16 +#define KS_VERTIA 0x17 +#define KS_VERTIB 0x18 +#define KS_VERTIC 0x19 +#define KS_HSCLL 0x1a +#define KS_HSCLH 0x1b +#define KS_VSCLL 0x1c +#define KS_VSCLH 0x1d +#define KS_OFMTA 0x1e +#define KS_OFMTB 0x1f +#define KS_VBICTL 0x20 +#define KS_CCDAT2 0x21 +#define KS_CCDAT1 0x22 +#define KS_VBIL30 0x23 +#define KS_VBIL74 0x24 +#define KS_VBIL118 0x25 +#define KS_VBIL1512 0x26 +#define KS_TTFRAM 0x27 +#define KS_TESTA 0x28 +#define KS_UVOFFH 0x29 +#define KS_UVOFFL 0x2a +#define KS_UGAIN 0x2b +#define KS_VGAIN 0x2c +#define KS_VAVB 0x2d +#define KS_VAVE 0x2e +#define KS_CTRACK 0x2f +#define KS_POLCTL 0x30 +#define KS_REFCOD 0x31 +#define KS_INVALY 0x32 +#define KS_INVALU 0x33 +#define KS_INVALV 0x34 +#define KS_UNUSEY 0x35 +#define KS_UNUSEU 0x36 +#define KS_UNUSEV 0x37 +#define KS_USRSAV 0x38 +#define KS_USREAV 0x39 +#define KS_SHS1A 0x3a +#define KS_SHS1B 0x3b +#define KS_SHS1C 0x3c +#define KS_CMDE 0x3d +#define KS_VSDEL 0x3e +#define KS_CMDF 0x3f +#define KS_GAMMA0 0x40 +#define KS_GAMMA1 0x41 +#define KS_GAMMA2 0x42 +#define KS_GAMMA3 0x43 +#define KS_GAMMA4 0x44 +#define KS_GAMMA5 0x45 +#define KS_GAMMA6 0x46 +#define KS_GAMMA7 0x47 +#define KS_GAMMA8 0x48 +#define KS_GAMMA9 0x49 +#define KS_GAMMA10 0x4a +#define KS_GAMMA11 0x4b +#define KS_GAMMA12 0x4c +#define KS_GAMMA13 0x4d +#define KS_GAMMA14 0x4e +#define KS_GAMMA15 0x4f +#define KS_GAMMA16 0x50 +#define KS_GAMMA17 0x51 +#define KS_GAMMA18 0x52 +#define KS_GAMMA19 0x53 +#define KS_GAMMA20 0x54 +#define KS_GAMMA21 0x55 +#define KS_GAMMA22 0x56 +#define KS_GAMMA23 0x57 +#define KS_GAMMA24 0x58 +#define KS_GAMMA25 0x59 +#define KS_GAMMA26 0x5a +#define KS_GAMMA27 0x5b +#define KS_GAMMA28 0x5c +#define KS_GAMMA29 0x5d +#define KS_GAMMA30 0x5e +#define KS_GAMMA31 0x5f +#define KS_GAMMAD0 0x60 +#define KS_GAMMAD1 0x61 +#define KS_GAMMAD2 0x62 +#define KS_GAMMAD3 0x63 +#define KS_GAMMAD4 0x64 +#define KS_GAMMAD5 0x65 +#define KS_GAMMAD6 0x66 +#define KS_GAMMAD7 0x67 +#define KS_GAMMAD8 0x68 +#define KS_GAMMAD9 0x69 +#define KS_GAMMAD10 0x6a +#define KS_GAMMAD11 0x6b +#define KS_GAMMAD12 0x6c +#define KS_GAMMAD13 0x6d +#define KS_GAMMAD14 0x6e +#define KS_GAMMAD15 0x6f +#define KS_GAMMAD16 0x70 +#define KS_GAMMAD17 0x71 +#define KS_GAMMAD18 0x72 +#define KS_GAMMAD19 0x73 +#define KS_GAMMAD20 0x74 +#define KS_GAMMAD21 0x75 +#define KS_GAMMAD22 0x76 +#define KS_GAMMAD23 0x77 +#define KS_GAMMAD24 0x78 +#define KS_GAMMAD25 0x79 +#define KS_GAMMAD26 0x7a +#define KS_GAMMAD27 0x7b +#define KS_GAMMAD28 0x7c +#define KS_GAMMAD29 0x7d +#define KS_GAMMAD30 0x7e +#define KS_GAMMAD31 0x7f + + +/**************************************************************************** +* mga_dev : represents one ks0127 chip. +****************************************************************************/ + +struct adjust { + int contrast; + int bright; + int hue; + int ugain; + int vgain; +}; + +struct ks0127 { + struct v4l2_subdev sd; + v4l2_std_id norm; + int ident; + u8 regs[256]; +}; + +static inline struct ks0127 *to_ks0127(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ks0127, sd); +} + + +static int debug; /* insmod parameter */ + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug output"); + +static u8 reg_defaults[64]; + +static void init_reg_defaults(void) +{ + static int initialized; + u8 *table = reg_defaults; + + if (initialized) + return; + initialized = 1; + + table[KS_CMDA] = 0x2c; /* VSE=0, CCIR 601, autodetect standard */ + table[KS_CMDB] = 0x12; /* VALIGN=0, AGC control and input */ + table[KS_CMDC] = 0x00; /* Test options */ + /* clock & input select, write 1 to PORTA */ + table[KS_CMDD] = 0x01; + table[KS_HAVB] = 0x00; /* HAV Start Control */ + table[KS_HAVE] = 0x00; /* HAV End Control */ + table[KS_HS1B] = 0x10; /* HS1 Start Control */ + table[KS_HS1E] = 0x00; /* HS1 End Control */ + table[KS_HS2B] = 0x00; /* HS2 Start Control */ + table[KS_HS2E] = 0x00; /* HS2 End Control */ + table[KS_AGC] = 0x53; /* Manual setting for AGC */ + table[KS_HXTRA] = 0x00; /* Extra Bits for HAV and HS1/2 */ + table[KS_CDEM] = 0x00; /* Chroma Demodulation Control */ + table[KS_PORTAB] = 0x0f; /* port B is input, port A output GPPORT */ + table[KS_LUMA] = 0x01; /* Luma control */ + table[KS_CON] = 0x00; /* Contrast Control */ + table[KS_BRT] = 0x00; /* Brightness Control */ + table[KS_CHROMA] = 0x2a; /* Chroma control A */ + table[KS_CHROMB] = 0x90; /* Chroma control B */ + table[KS_DEMOD] = 0x00; /* Chroma Demodulation Control & Status */ + table[KS_SAT] = 0x00; /* Color Saturation Control*/ + table[KS_HUE] = 0x00; /* Hue Control */ + table[KS_VERTIA] = 0x00; /* Vertical Processing Control A */ + /* Vertical Processing Control B, luma 1 line delayed */ + table[KS_VERTIB] = 0x12; + table[KS_VERTIC] = 0x0b; /* Vertical Processing Control C */ + table[KS_HSCLL] = 0x00; /* Horizontal Scaling Ratio Low */ + table[KS_HSCLH] = 0x00; /* Horizontal Scaling Ratio High */ + table[KS_VSCLL] = 0x00; /* Vertical Scaling Ratio Low */ + table[KS_VSCLH] = 0x00; /* Vertical Scaling Ratio High */ + /* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */ + table[KS_OFMTA] = 0x30; + table[KS_OFMTB] = 0x00; /* Output Control B */ + /* VBI Decoder Control; 4bit fmt: avoid Y overflow */ + table[KS_VBICTL] = 0x5d; + table[KS_CCDAT2] = 0x00; /* Read Only register */ + table[KS_CCDAT1] = 0x00; /* Read Only register */ + table[KS_VBIL30] = 0xa8; /* VBI data decoding options */ + table[KS_VBIL74] = 0xaa; /* VBI data decoding options */ + table[KS_VBIL118] = 0x2a; /* VBI data decoding options */ + table[KS_VBIL1512] = 0x00; /* VBI data decoding options */ + table[KS_TTFRAM] = 0x00; /* Teletext frame alignment pattern */ + table[KS_TESTA] = 0x00; /* test register, shouldn't be written */ + table[KS_UVOFFH] = 0x00; /* UV Offset Adjustment High */ + table[KS_UVOFFL] = 0x00; /* UV Offset Adjustment Low */ + table[KS_UGAIN] = 0x00; /* U Component Gain Adjustment */ + table[KS_VGAIN] = 0x00; /* V Component Gain Adjustment */ + table[KS_VAVB] = 0x07; /* VAV Begin */ + table[KS_VAVE] = 0x00; /* VAV End */ + table[KS_CTRACK] = 0x00; /* Chroma Tracking Control */ + table[KS_POLCTL] = 0x41; /* Timing Signal Polarity Control */ + table[KS_REFCOD] = 0x80; /* Reference Code Insertion Control */ + table[KS_INVALY] = 0x10; /* Invalid Y Code */ + table[KS_INVALU] = 0x80; /* Invalid U Code */ + table[KS_INVALV] = 0x80; /* Invalid V Code */ + table[KS_UNUSEY] = 0x10; /* Unused Y Code */ + table[KS_UNUSEU] = 0x80; /* Unused U Code */ + table[KS_UNUSEV] = 0x80; /* Unused V Code */ + table[KS_USRSAV] = 0x00; /* reserved */ + table[KS_USREAV] = 0x00; /* reserved */ + table[KS_SHS1A] = 0x00; /* User Defined SHS1 A */ + /* User Defined SHS1 B, ALT656=1 on 0127B */ + table[KS_SHS1B] = 0x80; + table[KS_SHS1C] = 0x00; /* User Defined SHS1 C */ + table[KS_CMDE] = 0x00; /* Command Register E */ + table[KS_VSDEL] = 0x00; /* VS Delay Control */ + /* Command Register F, update -immediately- */ + /* (there might come no vsync)*/ + table[KS_CMDF] = 0x02; +} + + +/* We need to manually read because of a bug in the KS0127 chip. + * + * An explanation from kayork@mail.utexas.edu: + * + * During I2C reads, the KS0127 only samples for a stop condition + * during the place where the acknowledge bit should be. Any standard + * I2C implementation (correctly) throws in another clock transition + * at the 9th bit, and the KS0127 will not recognize the stop condition + * and will continue to clock out data. + * + * So we have to do the read ourself. Big deal. + * workaround in i2c-algo-bit + */ + + +static u8 ks0127_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + char val = 0; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .len = sizeof(reg), + .buf = ® + }, + { + .addr = client->addr, + .flags = I2C_M_RD | I2C_M_NO_RD_ACK, + .len = sizeof(val), + .buf = &val + } + }; + int ret; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) + v4l2_dbg(1, debug, sd, "read error\n"); + + return val; +} + + +static void ks0127_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ks0127 *ks = to_ks0127(sd); + char msg[] = { reg, val }; + + if (i2c_master_send(client, msg, sizeof(msg)) != sizeof(msg)) + v4l2_dbg(1, debug, sd, "write error\n"); + + ks->regs[reg] = val; +} + + +/* generic bit-twiddling */ +static void ks0127_and_or(struct v4l2_subdev *sd, u8 reg, u8 and_v, u8 or_v) +{ + struct ks0127 *ks = to_ks0127(sd); + + u8 val = ks->regs[reg]; + val = (val & and_v) | or_v; + ks0127_write(sd, reg, val); +} + + + +/**************************************************************************** +* ks0127 private api +****************************************************************************/ +static void ks0127_init(struct v4l2_subdev *sd) +{ + struct ks0127 *ks = to_ks0127(sd); + u8 *table = reg_defaults; + int i; + + ks->ident = V4L2_IDENT_KS0127; + + v4l2_dbg(1, debug, sd, "reset\n"); + msleep(1); + + /* initialize all registers to known values */ + /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */ + + for (i = 1; i < 33; i++) + ks0127_write(sd, i, table[i]); + + for (i = 35; i < 40; i++) + ks0127_write(sd, i, table[i]); + + for (i = 41; i < 56; i++) + ks0127_write(sd, i, table[i]); + + for (i = 58; i < 64; i++) + ks0127_write(sd, i, table[i]); + + + if ((ks0127_read(sd, KS_STAT) & 0x80) == 0) { + ks->ident = V4L2_IDENT_KS0122S; + v4l2_dbg(1, debug, sd, "ks0122s found\n"); + return; + } + + switch (ks0127_read(sd, KS_CMDE) & 0x0f) { + case 0: + v4l2_dbg(1, debug, sd, "ks0127 found\n"); + break; + + case 9: + ks->ident = V4L2_IDENT_KS0127B; + v4l2_dbg(1, debug, sd, "ks0127B Revision A found\n"); + break; + + default: + v4l2_dbg(1, debug, sd, "unknown revision\n"); + break; + } +} + +static int ks0127_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct ks0127 *ks = to_ks0127(sd); + + switch (input) { + case KS_INPUT_COMPOSITE_1: + case KS_INPUT_COMPOSITE_2: + case KS_INPUT_COMPOSITE_3: + case KS_INPUT_COMPOSITE_4: + case KS_INPUT_COMPOSITE_5: + case KS_INPUT_COMPOSITE_6: + v4l2_dbg(1, debug, sd, + "s_routing %d: Composite\n", input); + /* autodetect 50/60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(sd, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(sd, KS_CMDB, 0xb0, input); + /* non-freerunning mode */ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00); + /* chroma trap, HYBWR=1 */ + ks0127_and_or(sd, KS_LUMA, 0x00, + (reg_defaults[KS_LUMA])|0x0c); + /* scaler fullbw, luma comb off */ + ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81); + /* manual chroma comb .25 .5 .25 */ + ks0127_and_or(sd, KS_VERTIC, 0x0f, 0x90); + + /* chroma path delay */ + ks0127_and_or(sd, KS_CHROMB, 0x0f, 0x90); + + ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_SVIDEO_1: + case KS_INPUT_SVIDEO_2: + case KS_INPUT_SVIDEO_3: + v4l2_dbg(1, debug, sd, + "s_routing %d: S-Video\n", input); + /* autodetect 50/60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(sd, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(sd, KS_CMDB, 0xb0, input); + /* non-freerunning mode */ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(sd, KS_LUMA, 0x00, + reg_defaults[KS_LUMA]); + /* disable luma comb */ + ks0127_and_or(sd, KS_VERTIA, 0x08, + (reg_defaults[KS_VERTIA]&0xf0)|0x01); + ks0127_and_or(sd, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + ks0127_and_or(sd, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_YUV656: + v4l2_dbg(1, debug, sd, "s_routing 15: YUV656\n"); + if (ks->norm & V4L2_STD_525_60) + /* force 60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x03); + else + /* force 50 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x02); + + ks0127_and_or(sd, KS_CMDA, 0xff, 0x40); /* VSE=1 */ + /* set input line and VALIGN */ + ks0127_and_or(sd, KS_CMDB, 0xb0, (input | 0x40)); + /* freerunning mode, */ + /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0 VMEM=1*/ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x87); + /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x08); + /* disable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x30); + /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */ + ks0127_and_or(sd, KS_LUMA, 0x00, 0x71); + ks0127_and_or(sd, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + /* scaler fullbw, luma comb off */ + ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81); + + ks0127_and_or(sd, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_and_or(sd, KS_CON, 0x00, 0x00); + ks0127_and_or(sd, KS_BRT, 0x00, 32); /* spec: 34 */ + /* spec: 229 (e5) */ + ks0127_and_or(sd, KS_SAT, 0x00, 0xe8); + ks0127_and_or(sd, KS_HUE, 0x00, 0); + + ks0127_and_or(sd, KS_UGAIN, 0x00, 238); + ks0127_and_or(sd, KS_VGAIN, 0x00, 0x00); + + /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */ + ks0127_and_or(sd, KS_UVOFFH, 0x00, 0x4f); + ks0127_and_or(sd, KS_UVOFFL, 0x00, 0x00); + break; + + default: + v4l2_dbg(1, debug, sd, + "s_routing: Unknown input %d\n", input); + break; + } + + /* hack: CDMLPF sometimes spontaneously switches on; */ + /* force back off */ + ks0127_write(sd, KS_DEMOD, reg_defaults[KS_DEMOD]); + return 0; +} + +static int ks0127_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct ks0127 *ks = to_ks0127(sd); + + /* Set to automatic SECAM/Fsc mode */ + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00); + + ks->norm = std; + if (std & V4L2_STD_NTSC) { + v4l2_dbg(1, debug, sd, + "s_std: NTSC_M\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20); + } else if (std & V4L2_STD_PAL_N) { + v4l2_dbg(1, debug, sd, + "s_std: NTSC_N (fixme)\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40); + } else if (std & V4L2_STD_PAL) { + v4l2_dbg(1, debug, sd, + "s_std: PAL_N\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20); + } else if (std & V4L2_STD_PAL_M) { + v4l2_dbg(1, debug, sd, + "s_std: PAL_M (fixme)\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40); + } else if (std & V4L2_STD_SECAM) { + v4l2_dbg(1, debug, sd, + "s_std: SECAM\n"); + + /* set to secam autodetection */ + ks0127_and_or(sd, KS_CHROMA, 0xdf, 0x20); + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00); + schedule_timeout_interruptible(HZ/10+1); + + /* did it autodetect? */ + if (!(ks0127_read(sd, KS_DEMOD) & 0x40)) + /* force to secam mode */ + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x0f); + } else { + v4l2_dbg(1, debug, sd, "s_std: Unknown norm %llx\n", + (unsigned long long)std); + } + return 0; +} + +static int ks0127_s_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "s_stream(%d)\n", enable); + if (enable) { + /* All output pins on */ + ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x30); + /* Obey the OEN pin */ + ks0127_and_or(sd, KS_CDEM, 0x7f, 0x00); + } else { + /* Video output pins off */ + ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x00); + /* Ignore the OEN pin */ + ks0127_and_or(sd, KS_CDEM, 0x7f, 0x80); + } + return 0; +} + +static int ks0127_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd) +{ + int stat = V4L2_IN_ST_NO_SIGNAL; + u8 status; + v4l2_std_id std = V4L2_STD_ALL; + + status = ks0127_read(sd, KS_STAT); + if (!(status & 0x20)) /* NOVID not set */ + stat = 0; + if (!(status & 0x01)) /* CLOCK set */ + stat |= V4L2_IN_ST_NO_COLOR; + if ((status & 0x08)) /* PALDET set */ + std = V4L2_STD_PAL; + else + std = V4L2_STD_NTSC; + if (pstd) + *pstd = std; + if (pstatus) + *pstatus = stat; + return 0; +} + +static int ks0127_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + v4l2_dbg(1, debug, sd, "querystd\n"); + return ks0127_status(sd, NULL, std); +} + +static int ks0127_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + v4l2_dbg(1, debug, sd, "g_input_status\n"); + return ks0127_status(sd, status, NULL); +} + +static int ks0127_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ks0127 *ks = to_ks0127(sd); + + return v4l2_chip_ident_i2c_client(client, chip, ks->ident, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops ks0127_core_ops = { + .g_chip_ident = ks0127_g_chip_ident, + .s_std = ks0127_s_std, +}; + +static const struct v4l2_subdev_video_ops ks0127_video_ops = { + .s_routing = ks0127_s_routing, + .s_stream = ks0127_s_stream, + .querystd = ks0127_querystd, + .g_input_status = ks0127_g_input_status, +}; + +static const struct v4l2_subdev_ops ks0127_ops = { + .core = &ks0127_core_ops, + .video = &ks0127_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + + +static int ks0127_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct ks0127 *ks; + struct v4l2_subdev *sd; + + v4l_info(client, "%s chip found @ 0x%x (%s)\n", + client->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board", + client->addr << 1, client->adapter->name); + + ks = kzalloc(sizeof(*ks), GFP_KERNEL); + if (ks == NULL) + return -ENOMEM; + sd = &ks->sd; + v4l2_i2c_subdev_init(sd, client, &ks0127_ops); + + /* power up */ + init_reg_defaults(); + ks0127_write(sd, KS_CMDA, 0x2c); + mdelay(10); + + /* reset the device */ + ks0127_init(sd); + return 0; +} + +static int ks0127_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + ks0127_write(sd, KS_OFMTA, 0x20); /* tristate */ + ks0127_write(sd, KS_CMDA, 0x2c | 0x80); /* power down */ + kfree(to_ks0127(sd)); + return 0; +} + +static const struct i2c_device_id ks0127_id[] = { + { "ks0127", 0 }, + { "ks0127b", 0 }, + { "ks0122s", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ks0127_id); + +static struct i2c_driver ks0127_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ks0127", + }, + .probe = ks0127_probe, + .remove = ks0127_remove, + .id_table = ks0127_id, +}; + +module_i2c_driver(ks0127_driver); diff --git a/drivers/media/i2c/ks0127.h b/drivers/media/i2c/ks0127.h new file mode 100644 index 00000000..cb8abd54 --- /dev/null +++ b/drivers/media/i2c/ks0127.h @@ -0,0 +1,51 @@ +/* + * Video Capture Driver ( Video for Linux 1/2 ) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef KS0127_H +#define KS0127_H + +/* input channels */ +#define KS_INPUT_COMPOSITE_1 0 +#define KS_INPUT_COMPOSITE_2 1 +#define KS_INPUT_COMPOSITE_3 2 +#define KS_INPUT_COMPOSITE_4 4 +#define KS_INPUT_COMPOSITE_5 5 +#define KS_INPUT_COMPOSITE_6 6 + +#define KS_INPUT_SVIDEO_1 8 +#define KS_INPUT_SVIDEO_2 9 +#define KS_INPUT_SVIDEO_3 10 + +#define KS_INPUT_YUV656 15 +#define KS_INPUT_COUNT 10 + +/* output channels */ +#define KS_OUTPUT_YUV656E 0 +#define KS_OUTPUT_EXV 1 + +/* video standards */ +#define KS_STD_NTSC_N 112 /* 50 Hz NTSC */ +#define KS_STD_PAL_M 113 /* 60 Hz PAL */ + +#endif /* KS0127_H */ + diff --git a/drivers/media/i2c/m52790.c b/drivers/media/i2c/m52790.c new file mode 100644 index 00000000..39f50fd2 --- /dev/null +++ b/drivers/media/i2c/m52790.c @@ -0,0 +1,216 @@ +/* + * m52790 i2c ivtv driver. + * Copyright (C) 2007 Hans Verkuil + * + * A/V source switching Mitsubishi M52790SP/FP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("i2c device driver for m52790 A/V switch"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + + +struct m52790_state { + struct v4l2_subdev sd; + u16 input; + u16 output; +}; + +static inline struct m52790_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct m52790_state, sd); +} + +/* ----------------------------------------------------------------------- */ + +static int m52790_write(struct v4l2_subdev *sd) +{ + struct m52790_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + u8 sw1 = (state->input | state->output) & 0xff; + u8 sw2 = (state->input | state->output) >> 8; + + return i2c_smbus_write_byte_data(client, sw1, sw2); +} + +/* Note: audio and video are linked and cannot be switched separately. + So audio and video routing commands are identical for this chip. + In theory the video amplifier and audio modes could be handled + separately for the output, but that seems to be overkill right now. + The same holds for implementing an audio mute control, this is now + part of the audio output routing. The normal case is that another + chip takes care of the actual muting so making it part of the + output routing seems to be the right thing to do for now. */ +static int m52790_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct m52790_state *state = to_state(sd); + + state->input = input; + state->output = output; + m52790_write(sd); + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int m52790_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct m52790_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (reg->reg != 0) + return -EINVAL; + reg->size = 1; + reg->val = state->input | state->output; + return 0; +} + +static int m52790_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct m52790_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (reg->reg != 0) + return -EINVAL; + state->input = reg->val & 0x0303; + state->output = reg->val & ~0x0303; + m52790_write(sd); + return 0; +} +#endif + +static int m52790_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_M52790, 0); +} + +static int m52790_log_status(struct v4l2_subdev *sd) +{ + struct m52790_state *state = to_state(sd); + + v4l2_info(sd, "Switch 1: %02x\n", + (state->input | state->output) & 0xff); + v4l2_info(sd, "Switch 2: %02x\n", + (state->input | state->output) >> 8); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops m52790_core_ops = { + .log_status = m52790_log_status, + .g_chip_ident = m52790_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = m52790_g_register, + .s_register = m52790_s_register, +#endif +}; + +static const struct v4l2_subdev_audio_ops m52790_audio_ops = { + .s_routing = m52790_s_routing, +}; + +static const struct v4l2_subdev_video_ops m52790_video_ops = { + .s_routing = m52790_s_routing, +}; + +static const struct v4l2_subdev_ops m52790_ops = { + .core = &m52790_core_ops, + .audio = &m52790_audio_ops, + .video = &m52790_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +static int m52790_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct m52790_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct m52790_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &m52790_ops); + state->input = M52790_IN_TUNER; + state->output = M52790_OUT_STEREO; + m52790_write(sd); + return 0; +} + +static int m52790_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id m52790_id[] = { + { "m52790", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, m52790_id); + +static struct i2c_driver m52790_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "m52790", + }, + .probe = m52790_probe, + .remove = m52790_remove, + .id_table = m52790_id, +}; + +module_i2c_driver(m52790_driver); diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig new file mode 100644 index 00000000..dc8c2505 --- /dev/null +++ b/drivers/media/i2c/m5mols/Kconfig @@ -0,0 +1,6 @@ +config VIDEO_M5MOLS + tristate "Fujitsu M-5MOLS 8MP sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports Fujitsu M-5MOLS camera sensor with ISP diff --git a/drivers/media/i2c/m5mols/Makefile b/drivers/media/i2c/m5mols/Makefile new file mode 100644 index 00000000..0a44e028 --- /dev/null +++ b/drivers/media/i2c/m5mols/Makefile @@ -0,0 +1,3 @@ +m5mols-objs := m5mols_core.o m5mols_controls.o m5mols_capture.o + +obj-$(CONFIG_VIDEO_M5MOLS) += m5mols.o diff --git a/drivers/media/i2c/m5mols/m5mols.h b/drivers/media/i2c/m5mols/m5mols.h new file mode 100644 index 00000000..90a6c520 --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols.h @@ -0,0 +1,348 @@ +/* + * Header for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef M5MOLS_H +#define M5MOLS_H + +#include +#include +#include "m5mols_reg.h" + + +/* An amount of data transmitted in addition to the value + * determined by CAPP_JPEG_SIZE_MAX register. + */ +#define M5MOLS_JPEG_TAGS_SIZE 0x20000 +#define M5MOLS_MAIN_JPEG_SIZE_MAX (5 * SZ_1M) + +extern int m5mols_debug; + +enum m5mols_restype { + M5MOLS_RESTYPE_MONITOR, + M5MOLS_RESTYPE_CAPTURE, + M5MOLS_RESTYPE_MAX, +}; + +/** + * struct m5mols_resolution - structure for the resolution + * @type: resolution type according to the pixel code + * @width: width of the resolution + * @height: height of the resolution + * @reg: resolution preset register value + */ +struct m5mols_resolution { + u8 reg; + enum m5mols_restype type; + u16 width; + u16 height; +}; + +/** + * struct m5mols_exif - structure for the EXIF information of M-5MOLS + * @exposure_time: exposure time register value + * @shutter_speed: speed of the shutter register value + * @aperture: aperture register value + * @exposure_bias: it calls also EV bias + * @iso_speed: ISO register value + * @flash: status register value of the flash + * @sdr: status register value of the Subject Distance Range + * @qval: not written exact meaning in document + */ +struct m5mols_exif { + u32 exposure_time; + u32 shutter_speed; + u32 aperture; + u32 brightness; + u32 exposure_bias; + u16 iso_speed; + u16 flash; + u16 sdr; + u16 qval; +}; + +/** + * struct m5mols_capture - Structure for the capture capability + * @exif: EXIF information + * @buf_size: internal JPEG frame buffer size, in bytes + * @main: size in bytes of the main image + * @thumb: size in bytes of the thumb image, if it was accompanied + * @total: total size in bytes of the produced image + */ +struct m5mols_capture { + struct m5mols_exif exif; + unsigned int buf_size; + u32 main; + u32 thumb; + u32 total; +}; + +/** + * struct m5mols_scenemode - structure for the scenemode capability + * @metering: metering light register value + * @ev_bias: EV bias register value + * @wb_mode: mode which means the WhiteBalance is Auto or Manual + * @wb_preset: whitebalance preset register value in the Manual mode + * @chroma_en: register value whether the Chroma capability is enabled or not + * @chroma_lvl: chroma's level register value + * @edge_en: register value Whether the Edge capability is enabled or not + * @edge_lvl: edge's level register value + * @af_range: Auto Focus's range + * @fd_mode: Face Detection mode + * @mcc: Multi-axis Color Conversion which means emotion color + * @light: status of the Light + * @flash: status of the Flash + * @tone: Tone color which means Contrast + * @iso: ISO register value + * @capt_mode: Mode of the Image Stabilization while the camera capturing + * @wdr: Wide Dynamic Range register value + * + * The each value according to each scenemode is recommended in the documents. + */ +struct m5mols_scenemode { + u8 metering; + u8 ev_bias; + u8 wb_mode; + u8 wb_preset; + u8 chroma_en; + u8 chroma_lvl; + u8 edge_en; + u8 edge_lvl; + u8 af_range; + u8 fd_mode; + u8 mcc; + u8 light; + u8 flash; + u8 tone; + u8 iso; + u8 capt_mode; + u8 wdr; +}; + +/** + * struct m5mols_version - firmware version information + * @customer: customer information + * @project: version of project information according to customer + * @fw: firmware revision + * @hw: hardware revision + * @param: version of the parameter + * @awb: Auto WhiteBalance algorithm version + * @str: information about manufacturer and packaging vendor + * @af: Auto Focus version + * + * The register offset starts the customer version at 0x0, and it ends + * the awb version at 0x09. The customer, project information occupies 1 bytes + * each. And also the fw, hw, param, awb each requires 2 bytes. The str is + * unique string associated with firmware's version. It includes information + * about manufacturer and the vendor of the sensor's packaging. The least + * significant 2 bytes of the string indicate packaging manufacturer. + */ +#define VERSION_STRING_SIZE 22 +struct m5mols_version { + u8 customer; + u8 project; + u16 fw; + u16 hw; + u16 param; + u16 awb; + u8 str[VERSION_STRING_SIZE]; + u8 af; +}; + +/** + * struct m5mols_info - M-5MOLS driver data structure + * @pdata: platform data + * @sd: v4l-subdev instance + * @pad: media pad + * @irq_waitq: waitqueue for the capture + * @irq_done: set to 1 in the interrupt handler + * @handle: control handler + * @auto_exposure: auto/manual exposure control + * @exposure_bias: exposure compensation control + * @exposure: manual exposure control + * @metering: exposure metering control + * @auto_iso: auto/manual ISO sensitivity control + * @iso: manual ISO sensitivity control + * @auto_wb: auto white balance control + * @lock_3a: 3A lock control + * @colorfx: color effect control + * @saturation: saturation control + * @zoom: zoom control + * @wdr: wide dynamic range control + * @stabilization: image stabilization control + * @jpeg_quality: JPEG compression quality control + * @set_power: optional power callback to the board code + * @lock: mutex protecting the structure fields below + * @ffmt: current fmt according to resolution type + * @res_type: current resolution type + * @ver: information of the version + * @cap: the capture mode attributes + * @isp_ready: 1 when the ISP controller has completed booting + * @power: current sensor's power status + * @ctrl_sync: 1 when the control handler state is restored in H/W + * @resolution: register value for current resolution + * @mode: register value for current operation mode + */ +struct m5mols_info { + const struct m5mols_platform_data *pdata; + struct v4l2_subdev sd; + struct media_pad pad; + + wait_queue_head_t irq_waitq; + atomic_t irq_done; + + struct v4l2_ctrl_handler handle; + struct { + /* exposure/exposure bias/auto exposure cluster */ + struct v4l2_ctrl *auto_exposure; + struct v4l2_ctrl *exposure_bias; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *metering; + }; + struct { + /* iso/auto iso cluster */ + struct v4l2_ctrl *auto_iso; + struct v4l2_ctrl *iso; + }; + struct v4l2_ctrl *auto_wb; + + struct v4l2_ctrl *lock_3a; + struct v4l2_ctrl *colorfx; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *zoom; + struct v4l2_ctrl *wdr; + struct v4l2_ctrl *stabilization; + struct v4l2_ctrl *jpeg_quality; + + int (*set_power)(struct device *dev, int on); + + struct mutex lock; + + struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; + int res_type; + + struct m5mols_version ver; + struct m5mols_capture cap; + + unsigned int isp_ready:1; + unsigned int power:1; + unsigned int ctrl_sync:1; + + u8 resolution; + u8 mode; +}; + +#define is_available_af(__info) (__info->ver.af) +#define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code) +#define is_manufacturer(__info, __manufacturer) \ + (__info->ver.str[0] == __manufacturer[0] && \ + __info->ver.str[1] == __manufacturer[1]) +/* + * I2C operation of the M-5MOLS + * + * The I2C read operation of the M-5MOLS requires 2 messages. The first + * message sends the information about the command, command category, and total + * message size. The second message is used to retrieve the data specifed in + * the first message + * + * 1st message 2nd message + * +-------+---+----------+-----+-------+ +------+------+------+------+ + * | size1 | R | category | cmd | size2 | | d[0] | d[1] | d[2] | d[3] | + * +-------+---+----------+-----+-------+ +------+------+------+------+ + * - size1: message data size(5 in this case) + * - size2: desired buffer size of the 2nd message + * - d[0..3]: according to size2 + * + * The I2C write operation needs just one message. The message includes + * category, command, total size, and desired data. + * + * 1st message + * +-------+---+----------+-----+------+------+------+------+ + * | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] | + * +-------+---+----------+-----+------+------+------+------+ + * - d[0..3]: according to size1 + */ +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val); +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val); +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); +int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val); + +int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask, + int timeout); + +/* Mask value for busy waiting until M-5MOLS I2C interface is initialized */ +#define M5MOLS_I2C_RDY_WAIT_FL (1 << 16) +/* ISP state transition timeout, in ms */ +#define M5MOLS_MODE_CHANGE_TIMEOUT 200 +#define M5MOLS_BUSY_WAIT_DEF_TIMEOUT 250 + +/* + * Mode operation of the M-5MOLS + * + * Changing the mode of the M-5MOLS is needed right executing order. + * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed + * by user. There are various categories associated with each mode. + * + * +============================================================+ + * | mode | category | + * +============================================================+ + * | FLASH | FLASH(only after Stand-by or Power-on) | + * | SYSTEM | SYSTEM(only after sensor arm-booting) | + * | PARAMETER | PARAMETER | + * | MONITOR | MONITOR(preview), Auto Focus, Face Detection | + * | CAPTURE | Single CAPTURE, Preview(recording) | + * +============================================================+ + * + * The available executing order between each modes are as follows: + * PARAMETER <---> MONITOR <---> CAPTURE + */ +int m5mols_set_mode(struct m5mols_info *info, u8 mode); + +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg); +int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 condition, u32 timeout); +int m5mols_restore_controls(struct m5mols_info *info); +int m5mols_start_capture(struct m5mols_info *info); +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode); +int m5mols_lock_3a(struct m5mols_info *info, bool lock); +int m5mols_set_ctrl(struct v4l2_ctrl *ctrl); +int m5mols_init_controls(struct v4l2_subdev *sd); + +/* The firmware function */ +int m5mols_update_fw(struct v4l2_subdev *sd, + int (*set_power)(struct m5mols_info *, bool)); + +static inline struct m5mols_info *to_m5mols(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct m5mols_info, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + struct m5mols_info *info = container_of(ctrl->handler, + struct m5mols_info, handle); + return &info->sd; +} + +static inline void m5mols_set_ctrl_mode(struct v4l2_ctrl *ctrl, + unsigned int mode) +{ + ctrl->priv = (void *)(uintptr_t)mode; +} + +static inline unsigned int m5mols_get_ctrl_mode(struct v4l2_ctrl *ctrl) +{ + return (unsigned int)(uintptr_t)ctrl->priv; +} + +#endif /* M5MOLS_H */ diff --git a/drivers/media/i2c/m5mols/m5mols_capture.c b/drivers/media/i2c/m5mols/m5mols_capture.c new file mode 100644 index 00000000..ab34cced --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols_capture.c @@ -0,0 +1,158 @@ + +/* + * The Capture code for Fujitsu M-5MOLS ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "m5mols.h" +#include "m5mols_reg.h" + +/** + * m5mols_read_rational - I2C read of a rational number + * + * Read numerator and denominator from registers @addr_num and @addr_den + * respectively and return the division result in @val. + */ +static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num, + u32 addr_den, u32 *val) +{ + u32 num, den; + + int ret = m5mols_read_u32(sd, addr_num, &num); + if (!ret) + ret = m5mols_read_u32(sd, addr_den, &den); + if (ret) + return ret; + *val = den == 0 ? 0 : num / den; + return ret; +} + +/** + * m5mols_capture_info - Gather captured image information + * + * For now it gathers only EXIF information and file size. + */ +static int m5mols_capture_info(struct m5mols_info *info) +{ + struct m5mols_exif *exif = &info->cap.exif; + struct v4l2_subdev *sd = &info->sd; + int ret; + + ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU, + EXIF_INFO_EXPTIME_DE, &exif->exposure_time); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE, + &exif->shutter_speed); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE, + &exif->aperture); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE, + &exif->brightness); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE, + &exif->exposure_bias); + if (ret) + return ret; + + ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed); + if (!ret) + ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash); + if (!ret) + ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr); + if (!ret) + ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval); + if (ret) + return ret; + + if (!ret) + ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main); + if (!ret) + ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb); + if (!ret) + info->cap.total = info->cap.main + info->cap.thumb; + + return ret; +} + +int m5mols_start_capture(struct m5mols_info *info) +{ + unsigned int framesize = info->cap.buf_size - M5MOLS_JPEG_TAGS_SIZE; + struct v4l2_subdev *sd = &info->sd; + int ret; + + /* + * Synchronize the controls, set the capture frame resolution and color + * format. The frame capture is initiated during switching from Monitor + * to Capture mode. + */ + ret = m5mols_set_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_restore_controls(info); + if (!ret) + ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG); + if (!ret) + ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, info->resolution); + if (!ret) + ret = m5mols_write(sd, CAPP_JPEG_SIZE_MAX, framesize); + if (!ret) + ret = m5mols_set_mode(info, REG_CAPTURE); + if (!ret) + /* Wait until a frame is captured to ISP internal memory */ + ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000); + if (ret) + return ret; + + /* + * Initiate the captured data transfer to a MIPI-CSI receiver. + */ + ret = m5mols_write(sd, CAPC_SEL_FRAME, 1); + if (!ret) + ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN); + if (!ret) { + bool captured = false; + unsigned int size; + + /* Wait for the capture completion interrupt */ + ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000); + if (!ret) { + captured = true; + ret = m5mols_capture_info(info); + } + size = captured ? info->cap.main : 0; + v4l2_dbg(1, m5mols_debug, sd, "%s: size: %d, thumb.: %d B\n", + __func__, size, info->cap.thumb); + + v4l2_subdev_notify(sd, S5P_FIMC_TX_END_NOTIFY, &size); + } + + return ret; +} diff --git a/drivers/media/i2c/m5mols/m5mols_controls.c b/drivers/media/i2c/m5mols/m5mols_controls.c new file mode 100644 index 00000000..f34429e4 --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols_controls.c @@ -0,0 +1,628 @@ +/* + * Controls for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include + +#include "m5mols.h" +#include "m5mols_reg.h" + +static struct m5mols_scenemode m5mols_default_scenemode[] = { + [REG_SCENE_NORMAL] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_NORMAL, REG_LIGHT_OFF, REG_FLASH_OFF, + 5, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_PORTRAIT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 4, + REG_AF_NORMAL, BIT_FD_EN | BIT_FD_DRAW_FACE_FRAME, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_LANDSCAPE] = { + REG_AE_ALL, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 6, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_SPORTS] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_PARTY_INDOOR] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_200, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_BEACH_SNOW] = { + REG_AE_CENTER, REG_AE_INDEX_10_POS, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_SUNSET] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET, + REG_AWB_DAYLIGHT, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_DAWN_DUSK] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET, + REG_AWB_FLUORESCENT_1, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_FALL] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 5, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_NIGHT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_AGAINST_LIGHT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_FIRE] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_TEXT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 7, + REG_AF_MACRO, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_ANTI_SHAKE, REG_WDR_ON, + }, + [REG_SCENE_CANDLE] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, +}; + +/** + * m5mols_do_scenemode() - Change current scenemode + * @mode: Desired mode of the scenemode + * + * WARNING: The execution order is important. Do not change the order. + */ +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode) +{ + struct v4l2_subdev *sd = &info->sd; + struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode]; + int ret; + + if (mode > REG_SCENE_CANDLE) + return -EINVAL; + + ret = v4l2_ctrl_s_ctrl(info->lock_3a, 0); + if (!ret) + ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, mode); + if (!ret) + ret = m5mols_write(sd, AE_EV_PRESET_CAPTURE, mode); + if (!ret) + ret = m5mols_write(sd, AE_MODE, scenemode.metering); + if (!ret) + ret = m5mols_write(sd, AE_INDEX, scenemode.ev_bias); + if (!ret) + ret = m5mols_write(sd, AWB_MODE, scenemode.wb_mode); + if (!ret) + ret = m5mols_write(sd, AWB_MANUAL, scenemode.wb_preset); + if (!ret) + ret = m5mols_write(sd, MON_CHROMA_EN, scenemode.chroma_en); + if (!ret) + ret = m5mols_write(sd, MON_CHROMA_LVL, scenemode.chroma_lvl); + if (!ret) + ret = m5mols_write(sd, MON_EDGE_EN, scenemode.edge_en); + if (!ret) + ret = m5mols_write(sd, MON_EDGE_LVL, scenemode.edge_lvl); + if (!ret && is_available_af(info)) + ret = m5mols_write(sd, AF_MODE, scenemode.af_range); + if (!ret && is_available_af(info)) + ret = m5mols_write(sd, FD_CTL, scenemode.fd_mode); + if (!ret) + ret = m5mols_write(sd, MON_TONE_CTL, scenemode.tone); + if (!ret) + ret = m5mols_write(sd, AE_ISO, scenemode.iso); + if (!ret) + ret = m5mols_set_mode(info, REG_CAPTURE); + if (!ret) + ret = m5mols_write(sd, CAPP_WDR_EN, scenemode.wdr); + if (!ret) + ret = m5mols_write(sd, CAPP_MCC_MODE, scenemode.mcc); + if (!ret) + ret = m5mols_write(sd, CAPP_LIGHT_CTRL, scenemode.light); + if (!ret) + ret = m5mols_write(sd, CAPP_FLASH_CTRL, scenemode.flash); + if (!ret) + ret = m5mols_write(sd, CAPC_MODE, scenemode.capt_mode); + if (!ret) + ret = m5mols_set_mode(info, REG_MONITOR); + + return ret; +} + +static int m5mols_3a_lock(struct m5mols_info *info, struct v4l2_ctrl *ctrl) +{ + bool af_lock = ctrl->val & V4L2_LOCK_FOCUS; + int ret = 0; + + if ((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_EXPOSURE) { + bool ae_lock = ctrl->val & V4L2_LOCK_EXPOSURE; + + ret = m5mols_write(&info->sd, AE_LOCK, ae_lock ? + REG_AE_LOCK : REG_AE_UNLOCK); + if (ret) + return ret; + } + + if (((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_WHITE_BALANCE) + && info->auto_wb->val) { + bool awb_lock = ctrl->val & V4L2_LOCK_WHITE_BALANCE; + + ret = m5mols_write(&info->sd, AWB_LOCK, awb_lock ? + REG_AWB_LOCK : REG_AWB_UNLOCK); + if (ret) + return ret; + } + + if (!info->ver.af || !af_lock) + return ret; + + if ((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_FOCUS) + ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP); + + return ret; +} + +static int m5mols_set_metering_mode(struct m5mols_info *info, int mode) +{ + unsigned int metering; + + switch (mode) { + case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED: + metering = REG_AE_CENTER; + break; + case V4L2_EXPOSURE_METERING_SPOT: + metering = REG_AE_SPOT; + break; + default: + metering = REG_AE_ALL; + break; + } + + return m5mols_write(&info->sd, AE_MODE, metering); +} + +static int m5mols_set_exposure(struct m5mols_info *info, int exposure) +{ + struct v4l2_subdev *sd = &info->sd; + int ret = 0; + + if (exposure == V4L2_EXPOSURE_AUTO) { + /* Unlock auto exposure */ + info->lock_3a->val &= ~V4L2_LOCK_EXPOSURE; + m5mols_3a_lock(info, info->lock_3a); + + ret = m5mols_set_metering_mode(info, info->metering->val); + if (ret < 0) + return ret; + + v4l2_dbg(1, m5mols_debug, sd, + "%s: exposure bias: %#x, metering: %#x\n", + __func__, info->exposure_bias->val, + info->metering->val); + + return m5mols_write(sd, AE_INDEX, info->exposure_bias->val); + } + + if (exposure == V4L2_EXPOSURE_MANUAL) { + ret = m5mols_write(sd, AE_MODE, REG_AE_OFF); + if (ret == 0) + ret = m5mols_write(sd, AE_MAN_GAIN_MON, + info->exposure->val); + if (ret == 0) + ret = m5mols_write(sd, AE_MAN_GAIN_CAP, + info->exposure->val); + + v4l2_dbg(1, m5mols_debug, sd, "%s: exposure: %#x\n", + __func__, info->exposure->val); + } + + return ret; +} + +static int m5mols_set_white_balance(struct m5mols_info *info, int val) +{ + static const unsigned short wb[][2] = { + { V4L2_WHITE_BALANCE_INCANDESCENT, REG_AWB_INCANDESCENT }, + { V4L2_WHITE_BALANCE_FLUORESCENT, REG_AWB_FLUORESCENT_1 }, + { V4L2_WHITE_BALANCE_FLUORESCENT_H, REG_AWB_FLUORESCENT_2 }, + { V4L2_WHITE_BALANCE_HORIZON, REG_AWB_HORIZON }, + { V4L2_WHITE_BALANCE_DAYLIGHT, REG_AWB_DAYLIGHT }, + { V4L2_WHITE_BALANCE_FLASH, REG_AWB_LEDLIGHT }, + { V4L2_WHITE_BALANCE_CLOUDY, REG_AWB_CLOUDY }, + { V4L2_WHITE_BALANCE_SHADE, REG_AWB_SHADE }, + { V4L2_WHITE_BALANCE_AUTO, REG_AWB_AUTO }, + }; + int i; + struct v4l2_subdev *sd = &info->sd; + int ret = -EINVAL; + + for (i = 0; i < ARRAY_SIZE(wb); i++) { + int awb; + if (wb[i][0] != val) + continue; + + v4l2_dbg(1, m5mols_debug, sd, + "Setting white balance to: %#x\n", wb[i][0]); + + awb = wb[i][0] == V4L2_WHITE_BALANCE_AUTO; + ret = m5mols_write(sd, AWB_MODE, awb ? REG_AWB_AUTO : + REG_AWB_PRESET); + if (ret < 0) + return ret; + + if (!awb) + ret = m5mols_write(sd, AWB_MANUAL, wb[i][1]); + } + + return ret; +} + +static int m5mols_set_saturation(struct m5mols_info *info, int val) +{ + int ret = m5mols_write(&info->sd, MON_CHROMA_LVL, val); + if (ret < 0) + return ret; + + return m5mols_write(&info->sd, MON_CHROMA_EN, REG_CHROMA_ON); +} + +static int m5mols_set_color_effect(struct m5mols_info *info, int val) +{ + unsigned int m_effect = REG_COLOR_EFFECT_OFF; + unsigned int p_effect = REG_EFFECT_OFF; + unsigned int cfix_r = 0, cfix_b = 0; + struct v4l2_subdev *sd = &info->sd; + int ret = 0; + + switch (val) { + case V4L2_COLORFX_BW: + m_effect = REG_COLOR_EFFECT_ON; + break; + case V4L2_COLORFX_NEGATIVE: + p_effect = REG_EFFECT_NEGA; + break; + case V4L2_COLORFX_EMBOSS: + p_effect = REG_EFFECT_EMBOSS; + break; + case V4L2_COLORFX_SEPIA: + m_effect = REG_COLOR_EFFECT_ON; + cfix_r = REG_CFIXR_SEPIA; + cfix_b = REG_CFIXB_SEPIA; + break; + } + + ret = m5mols_write(sd, PARM_EFFECT, p_effect); + if (!ret) + ret = m5mols_write(sd, MON_EFFECT, m_effect); + + if (ret == 0 && m_effect == REG_COLOR_EFFECT_ON) { + ret = m5mols_write(sd, MON_CFIXR, cfix_r); + if (!ret) + ret = m5mols_write(sd, MON_CFIXB, cfix_b); + } + + v4l2_dbg(1, m5mols_debug, sd, + "p_effect: %#x, m_effect: %#x, r: %#x, b: %#x (%d)\n", + p_effect, m_effect, cfix_r, cfix_b, ret); + + return ret; +} + +static int m5mols_set_iso(struct m5mols_info *info, int auto_iso) +{ + u32 iso = auto_iso ? 0 : info->iso->val + 1; + + return m5mols_write(&info->sd, AE_ISO, iso); +} + +static int m5mols_set_wdr(struct m5mols_info *info, int wdr) +{ + int ret; + + ret = m5mols_write(&info->sd, MON_TONE_CTL, wdr ? 9 : 5); + if (ret < 0) + return ret; + + ret = m5mols_set_mode(info, REG_CAPTURE); + if (ret < 0) + return ret; + + return m5mols_write(&info->sd, CAPP_WDR_EN, wdr); +} + +static int m5mols_set_stabilization(struct m5mols_info *info, int val) +{ + struct v4l2_subdev *sd = &info->sd; + unsigned int evp = val ? 0xe : 0x0; + int ret; + + ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, evp); + if (ret < 0) + return ret; + + return m5mols_write(sd, AE_EV_PRESET_CAPTURE, evp); +} + +static int m5mols_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct m5mols_info *info = to_m5mols(sd); + int ret = 0; + u8 status; + + v4l2_dbg(1, m5mols_debug, sd, "%s: ctrl: %s (%d)\n", + __func__, ctrl->name, info->isp_ready); + + if (!info->isp_ready) + return -EBUSY; + + switch (ctrl->id) { + case V4L2_CID_ISO_SENSITIVITY_AUTO: + ret = m5mols_read_u8(sd, AE_ISO, &status); + if (ret == 0) + ctrl->val = !status; + if (status != REG_ISO_AUTO) + info->iso->val = status - 1; + break; + + case V4L2_CID_3A_LOCK: + ctrl->val &= ~0x7; + + ret = m5mols_read_u8(sd, AE_LOCK, &status); + if (ret) + return ret; + if (status) + info->lock_3a->val |= V4L2_LOCK_EXPOSURE; + + ret = m5mols_read_u8(sd, AWB_LOCK, &status); + if (ret) + return ret; + if (status) + info->lock_3a->val |= V4L2_LOCK_EXPOSURE; + + ret = m5mols_read_u8(sd, AF_EXECUTE, &status); + if (!status) + info->lock_3a->val |= V4L2_LOCK_EXPOSURE; + break; + } + + return ret; +} + +static int m5mols_s_ctrl(struct v4l2_ctrl *ctrl) +{ + unsigned int ctrl_mode = m5mols_get_ctrl_mode(ctrl); + struct v4l2_subdev *sd = to_sd(ctrl); + struct m5mols_info *info = to_m5mols(sd); + int last_mode = info->mode; + int ret = 0; + + /* + * If needed, defer restoring the controls until + * the device is fully initialized. + */ + if (!info->isp_ready) { + info->ctrl_sync = 0; + return 0; + } + + v4l2_dbg(1, m5mols_debug, sd, "%s: %s, val: %d, priv: %p\n", + __func__, ctrl->name, ctrl->val, ctrl->priv); + + if (ctrl_mode && ctrl_mode != info->mode) { + ret = m5mols_set_mode(info, ctrl_mode); + if (ret < 0) + return ret; + } + + switch (ctrl->id) { + case V4L2_CID_3A_LOCK: + ret = m5mols_3a_lock(info, ctrl); + break; + + case V4L2_CID_ZOOM_ABSOLUTE: + ret = m5mols_write(sd, MON_ZOOM, ctrl->val); + break; + + case V4L2_CID_EXPOSURE_AUTO: + ret = m5mols_set_exposure(info, ctrl->val); + break; + + case V4L2_CID_ISO_SENSITIVITY: + ret = m5mols_set_iso(info, ctrl->val); + break; + + case V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE: + ret = m5mols_set_white_balance(info, ctrl->val); + break; + + case V4L2_CID_SATURATION: + ret = m5mols_set_saturation(info, ctrl->val); + break; + + case V4L2_CID_COLORFX: + ret = m5mols_set_color_effect(info, ctrl->val); + break; + + case V4L2_CID_WIDE_DYNAMIC_RANGE: + ret = m5mols_set_wdr(info, ctrl->val); + break; + + case V4L2_CID_IMAGE_STABILIZATION: + ret = m5mols_set_stabilization(info, ctrl->val); + break; + + case V4L2_CID_JPEG_COMPRESSION_QUALITY: + ret = m5mols_write(sd, CAPP_JPEG_RATIO, ctrl->val); + break; + } + + if (ret == 0 && info->mode != last_mode) + ret = m5mols_set_mode(info, last_mode); + + return ret; +} + +static const struct v4l2_ctrl_ops m5mols_ctrl_ops = { + .g_volatile_ctrl = m5mols_g_volatile_ctrl, + .s_ctrl = m5mols_s_ctrl, +}; + +/* Supported manual ISO values */ +static const s64 iso_qmenu[] = { + /* AE_ISO: 0x01...0x07 (ISO: 50...3200) */ + 50000, 100000, 200000, 400000, 800000, 1600000, 3200000 +}; + +/* Supported Exposure Bias values, -2.0EV...+2.0EV */ +static const s64 ev_bias_qmenu[] = { + /* AE_INDEX: 0x00...0x08 */ + -2000, -1500, -1000, -500, 0, 500, 1000, 1500, 2000 +}; + +int m5mols_init_controls(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + u16 exposure_max; + u16 zoom_step; + int ret; + + /* Determine the firmware dependant control range and step values */ + ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &exposure_max); + if (ret < 0) + return ret; + + zoom_step = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1; + v4l2_ctrl_handler_init(&info->handle, 20); + + info->auto_wb = v4l2_ctrl_new_std_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, + 9, ~0x3fe, V4L2_WHITE_BALANCE_AUTO); + + /* Exposure control cluster */ + info->auto_exposure = v4l2_ctrl_new_std_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, + 1, ~0x03, V4L2_EXPOSURE_AUTO); + + info->exposure = v4l2_ctrl_new_std(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_EXPOSURE, + 0, exposure_max, 1, exposure_max / 2); + + info->exposure_bias = v4l2_ctrl_new_int_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_AUTO_EXPOSURE_BIAS, + ARRAY_SIZE(ev_bias_qmenu) - 1, + ARRAY_SIZE(ev_bias_qmenu)/2 - 1, + ev_bias_qmenu); + + info->metering = v4l2_ctrl_new_std_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_EXPOSURE_METERING, + 2, ~0x7, V4L2_EXPOSURE_METERING_AVERAGE); + + /* ISO control cluster */ + info->auto_iso = v4l2_ctrl_new_std_menu(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_ISO_SENSITIVITY_AUTO, 1, ~0x03, 1); + + info->iso = v4l2_ctrl_new_int_menu(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_ISO_SENSITIVITY, ARRAY_SIZE(iso_qmenu) - 1, + ARRAY_SIZE(iso_qmenu)/2 - 1, iso_qmenu); + + info->saturation = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_SATURATION, 1, 5, 1, 3); + + info->zoom = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_ZOOM_ABSOLUTE, 1, 70, zoom_step, 1); + + info->colorfx = v4l2_ctrl_new_std_menu(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_COLORFX, 4, 0, V4L2_COLORFX_NONE); + + info->wdr = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_WIDE_DYNAMIC_RANGE, 0, 1, 1, 0); + + info->stabilization = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_IMAGE_STABILIZATION, 0, 1, 1, 0); + + info->jpeg_quality = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, 1, 100, 1, 80); + + info->lock_3a = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_3A_LOCK, 0, 0x7, 0, 0); + + if (info->handle.error) { + int ret = info->handle.error; + v4l2_err(sd, "Failed to initialize controls: %d\n", ret); + v4l2_ctrl_handler_free(&info->handle); + return ret; + } + + v4l2_ctrl_auto_cluster(4, &info->auto_exposure, 1, false); + info->auto_iso->flags |= V4L2_CTRL_FLAG_VOLATILE | + V4L2_CTRL_FLAG_UPDATE; + v4l2_ctrl_auto_cluster(2, &info->auto_iso, 0, false); + + info->lock_3a->flags |= V4L2_CTRL_FLAG_VOLATILE; + + m5mols_set_ctrl_mode(info->auto_exposure, REG_PARAMETER); + m5mols_set_ctrl_mode(info->auto_wb, REG_PARAMETER); + m5mols_set_ctrl_mode(info->colorfx, REG_MONITOR); + + sd->ctrl_handler = &info->handle; + + return 0; +} diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c new file mode 100644 index 00000000..0b899cb6 --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -0,0 +1,1057 @@ +/* + * Driver for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "m5mols.h" +#include "m5mols_reg.h" + +int m5mols_debug; +module_param(m5mols_debug, int, 0644); + +#define MODULE_NAME "M5MOLS" +#define M5MOLS_I2C_CHECK_RETRY 500 + +/* The regulator consumer names for external voltage regulators */ +static struct regulator_bulk_data supplies[] = { + { + .supply = "core", /* ARM core power, 1.2V */ + }, { + .supply = "dig_18", /* digital power 1, 1.8V */ + }, { + .supply = "d_sensor", /* sensor power 1, 1.8V */ + }, { + .supply = "dig_28", /* digital power 2, 2.8V */ + }, { + .supply = "a_sensor", /* analog power */ + }, { + .supply = "dig_12", /* digital power 3, 1.2V */ + }, +}; + +static struct v4l2_mbus_framefmt m5mols_default_ffmt[M5MOLS_RESTYPE_MAX] = { + [M5MOLS_RESTYPE_MONITOR] = { + .width = 1920, + .height = 1080, + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + [M5MOLS_RESTYPE_CAPTURE] = { + .width = 1920, + .height = 1080, + .code = V4L2_MBUS_FMT_JPEG_1X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, + }, +}; +#define SIZE_DEFAULT_FFMT ARRAY_SIZE(m5mols_default_ffmt) + +static const struct m5mols_resolution m5mols_reg_res[] = { + { 0x01, M5MOLS_RESTYPE_MONITOR, 128, 96 }, /* SUB-QCIF */ + { 0x03, M5MOLS_RESTYPE_MONITOR, 160, 120 }, /* QQVGA */ + { 0x05, M5MOLS_RESTYPE_MONITOR, 176, 144 }, /* QCIF */ + { 0x06, M5MOLS_RESTYPE_MONITOR, 176, 176 }, + { 0x08, M5MOLS_RESTYPE_MONITOR, 240, 320 }, /* QVGA */ + { 0x09, M5MOLS_RESTYPE_MONITOR, 320, 240 }, /* QVGA */ + { 0x0c, M5MOLS_RESTYPE_MONITOR, 240, 400 }, /* WQVGA */ + { 0x0d, M5MOLS_RESTYPE_MONITOR, 400, 240 }, /* WQVGA */ + { 0x0e, M5MOLS_RESTYPE_MONITOR, 352, 288 }, /* CIF */ + { 0x13, M5MOLS_RESTYPE_MONITOR, 480, 360 }, + { 0x15, M5MOLS_RESTYPE_MONITOR, 640, 360 }, /* qHD */ + { 0x17, M5MOLS_RESTYPE_MONITOR, 640, 480 }, /* VGA */ + { 0x18, M5MOLS_RESTYPE_MONITOR, 720, 480 }, + { 0x1a, M5MOLS_RESTYPE_MONITOR, 800, 480 }, /* WVGA */ + { 0x1f, M5MOLS_RESTYPE_MONITOR, 800, 600 }, /* SVGA */ + { 0x21, M5MOLS_RESTYPE_MONITOR, 1280, 720 }, /* HD */ + { 0x25, M5MOLS_RESTYPE_MONITOR, 1920, 1080 }, /* 1080p */ + { 0x29, M5MOLS_RESTYPE_MONITOR, 3264, 2448 }, /* 2.63fps 8M */ + { 0x39, M5MOLS_RESTYPE_MONITOR, 800, 602 }, /* AHS_MON debug */ + + { 0x02, M5MOLS_RESTYPE_CAPTURE, 320, 240 }, /* QVGA */ + { 0x04, M5MOLS_RESTYPE_CAPTURE, 400, 240 }, /* WQVGA */ + { 0x07, M5MOLS_RESTYPE_CAPTURE, 480, 360 }, + { 0x08, M5MOLS_RESTYPE_CAPTURE, 640, 360 }, /* qHD */ + { 0x09, M5MOLS_RESTYPE_CAPTURE, 640, 480 }, /* VGA */ + { 0x0a, M5MOLS_RESTYPE_CAPTURE, 800, 480 }, /* WVGA */ + { 0x10, M5MOLS_RESTYPE_CAPTURE, 1280, 720 }, /* HD */ + { 0x14, M5MOLS_RESTYPE_CAPTURE, 1280, 960 }, /* 1M */ + { 0x17, M5MOLS_RESTYPE_CAPTURE, 1600, 1200 }, /* 2M */ + { 0x19, M5MOLS_RESTYPE_CAPTURE, 1920, 1080 }, /* Full-HD */ + { 0x1a, M5MOLS_RESTYPE_CAPTURE, 2048, 1152 }, /* 3Mega */ + { 0x1b, M5MOLS_RESTYPE_CAPTURE, 2048, 1536 }, + { 0x1c, M5MOLS_RESTYPE_CAPTURE, 2560, 1440 }, /* 4Mega */ + { 0x1d, M5MOLS_RESTYPE_CAPTURE, 2560, 1536 }, + { 0x1f, M5MOLS_RESTYPE_CAPTURE, 2560, 1920 }, /* 5Mega */ + { 0x21, M5MOLS_RESTYPE_CAPTURE, 3264, 1836 }, /* 6Mega */ + { 0x22, M5MOLS_RESTYPE_CAPTURE, 3264, 1960 }, + { 0x25, M5MOLS_RESTYPE_CAPTURE, 3264, 2448 }, /* 8Mega */ +}; + +/** + * m5mols_swap_byte - an byte array to integer conversion function + * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet + * + * Convert I2C data byte array with performing any required byte + * reordering to assure proper values for each data type, regardless + * of the architecture endianness. + */ +static u32 m5mols_swap_byte(u8 *data, u8 length) +{ + if (length == 1) + return *data; + else if (length == 2) + return be16_to_cpu(*((u16 *)data)); + else + return be32_to_cpu(*((u32 *)data)); +} + +/** + * m5mols_read - I2C read function + * @reg: combination of size, category and command for the I2C packet + * @size: desired size of I2C packet + * @val: read value + * + * Returns 0 on success, or else negative errno. + */ +static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct m5mols_info *info = to_m5mols(sd); + u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1]; + u8 category = I2C_CATEGORY(reg); + u8 cmd = I2C_COMMAND(reg); + struct i2c_msg msg[2]; + u8 wbuf[5]; + int ret; + + if (!client->adapter) + return -ENODEV; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 5; + msg[0].buf = wbuf; + wbuf[0] = 5; + wbuf[1] = M5MOLS_BYTE_READ; + wbuf[2] = category; + wbuf[3] = cmd; + wbuf[4] = size; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = size + 1; + msg[1].buf = rbuf; + + /* minimum stabilization time */ + usleep_range(200, 200); + + ret = i2c_transfer(client->adapter, msg, 2); + + if (ret == 2) { + *val = m5mols_swap_byte(&rbuf[1], size); + return 0; + } + + if (info->isp_ready) + v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n", + size, category, cmd, ret); + + return ret < 0 ? ret : -EIO; +} + +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val) +{ + u32 val_32; + int ret; + + if (I2C_SIZE(reg) != 1) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); + if (ret) + return ret; + + *val = (u8)val_32; + return ret; +} + +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val) +{ + u32 val_32; + int ret; + + if (I2C_SIZE(reg) != 2) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); + if (ret) + return ret; + + *val = (u16)val_32; + return ret; +} + +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val) +{ + if (I2C_SIZE(reg) != 4) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + return m5mols_read(sd, I2C_SIZE(reg), reg, val); +} + +/** + * m5mols_write - I2C command write function + * @reg: combination of size, category and command for the I2C packet + * @val: value to write + * + * Returns 0 on success, or else negative errno. + */ +int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct m5mols_info *info = to_m5mols(sd); + u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4]; + u8 category = I2C_CATEGORY(reg); + u8 cmd = I2C_COMMAND(reg); + u8 size = I2C_SIZE(reg); + u32 *buf = (u32 *)&wbuf[4]; + struct i2c_msg msg[1]; + int ret; + + if (!client->adapter) + return -ENODEV; + + if (size != 1 && size != 2 && size != 4) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + msg->addr = client->addr; + msg->flags = 0; + msg->len = (u16)size + 4; + msg->buf = wbuf; + wbuf[0] = size + 4; + wbuf[1] = M5MOLS_BYTE_WRITE; + wbuf[2] = category; + wbuf[3] = cmd; + + *buf = m5mols_swap_byte((u8 *)&val, size); + + usleep_range(200, 200); + + ret = i2c_transfer(client->adapter, msg, 1); + if (ret == 1) + return 0; + + if (info->isp_ready) + v4l2_err(sd, "write failed: cat:%02x cmd:%02x ret:%d\n", + category, cmd, ret); + + return ret < 0 ? ret : -EIO; +} + +/** + * m5mols_busy_wait - Busy waiting with I2C register polling + * @reg: the I2C_REG() address of an 8-bit status register to check + * @value: expected status register value + * @mask: bit mask for the read status register value + * @timeout: timeout in miliseconds, or -1 for default timeout + * + * The @reg register value is ORed with @mask before comparing with @value. + * + * Return: 0 if the requested condition became true within less than + * @timeout ms, or else negative errno. + */ +int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask, + int timeout) +{ + int ms = timeout < 0 ? M5MOLS_BUSY_WAIT_DEF_TIMEOUT : timeout; + unsigned long end = jiffies + msecs_to_jiffies(ms); + u8 status; + + do { + int ret = m5mols_read_u8(sd, reg, &status); + + if (ret < 0 && !(mask & M5MOLS_I2C_RDY_WAIT_FL)) + return ret; + if (!ret && (status & mask & 0xff) == (value & 0xff)) + return 0; + usleep_range(100, 250); + } while (ms > 0 && time_is_after_jiffies(end)); + + return -EBUSY; +} + +/** + * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts + * + * Before writing desired interrupt value the INT_FACTOR register should + * be read to clear pending interrupts. + */ +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg) +{ + struct m5mols_info *info = to_m5mols(sd); + u8 mask = is_available_af(info) ? REG_INT_AF : 0; + u8 dummy; + int ret; + + ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy); + if (!ret) + ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask); + return ret; +} + +int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 irq_mask, u32 timeout) +{ + struct m5mols_info *info = to_m5mols(sd); + + int ret = wait_event_interruptible_timeout(info->irq_waitq, + atomic_add_unless(&info->irq_done, -1, 0), + msecs_to_jiffies(timeout)); + if (ret <= 0) + return ret ? ret : -ETIMEDOUT; + + return m5mols_busy_wait(sd, SYSTEM_INT_FACTOR, irq_mask, + M5MOLS_I2C_RDY_WAIT_FL | irq_mask, -1); +} + +/** + * m5mols_reg_mode - Write the mode and check busy status + * + * It always accompanies a little delay changing the M-5MOLS mode, so it is + * needed checking current busy status to guarantee right mode. + */ +static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode) +{ + int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode); + if (ret < 0) + return ret; + return m5mols_busy_wait(sd, SYSTEM_SYSMODE, mode, 0xff, + M5MOLS_MODE_CHANGE_TIMEOUT); +} + +/** + * m5mols_set_mode - set the M-5MOLS controller mode + * @mode: the required operation mode + * + * The commands of M-5MOLS are grouped into specific modes. Each functionality + * can be guaranteed only when the sensor is operating in mode which a command + * belongs to. + */ +int m5mols_set_mode(struct m5mols_info *info, u8 mode) +{ + struct v4l2_subdev *sd = &info->sd; + int ret = -EINVAL; + u8 reg; + + if (mode < REG_PARAMETER || mode > REG_CAPTURE) + return ret; + + ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®); + if (ret || reg == mode) + return ret; + + switch (reg) { + case REG_PARAMETER: + ret = m5mols_reg_mode(sd, REG_MONITOR); + if (mode == REG_MONITOR) + break; + if (!ret) + ret = m5mols_reg_mode(sd, REG_CAPTURE); + break; + + case REG_MONITOR: + if (mode == REG_PARAMETER) { + ret = m5mols_reg_mode(sd, REG_PARAMETER); + break; + } + + ret = m5mols_reg_mode(sd, REG_CAPTURE); + break; + + case REG_CAPTURE: + ret = m5mols_reg_mode(sd, REG_MONITOR); + if (mode == REG_MONITOR) + break; + if (!ret) + ret = m5mols_reg_mode(sd, REG_PARAMETER); + break; + + default: + v4l2_warn(sd, "Wrong mode: %d\n", mode); + } + + if (!ret) + info->mode = mode; + + return ret; +} + +/** + * m5mols_get_version - retrieve full revisions information of M-5MOLS + * + * The version information includes revisions of hardware and firmware, + * AutoFocus alghorithm version and the version string. + */ +static int m5mols_get_version(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + struct m5mols_version *ver = &info->ver; + u8 *str = ver->str; + int i; + int ret; + + ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer); + if (!ret) + ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb); + if (!ret) + ret = m5mols_read_u8(sd, AF_VERSION, &ver->af); + if (ret) + return ret; + + for (i = 0; i < VERSION_STRING_SIZE; i++) { + ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]); + if (ret) + return ret; + } + + ver->fw = be16_to_cpu(ver->fw); + ver->hw = be16_to_cpu(ver->hw); + ver->param = be16_to_cpu(ver->param); + ver->awb = be16_to_cpu(ver->awb); + + v4l2_info(sd, "Manufacturer\t[%s]\n", + is_manufacturer(info, REG_SAMSUNG_ELECTRO) ? + "Samsung Electro-Machanics" : + is_manufacturer(info, REG_SAMSUNG_OPTICS) ? + "Samsung Fiber-Optics" : + is_manufacturer(info, REG_SAMSUNG_TECHWIN) ? + "Samsung Techwin" : "None"); + v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n", + info->ver.customer, info->ver.project); + + if (!is_available_af(info)) + v4l2_info(sd, "No support Auto Focus on this firmware\n"); + + return ret; +} + +/** + * __find_restype - Lookup M-5MOLS resolution type according to pixel code + * @code: pixel code + */ +static enum m5mols_restype __find_restype(enum v4l2_mbus_pixelcode code) +{ + enum m5mols_restype type = M5MOLS_RESTYPE_MONITOR; + + do { + if (code == m5mols_default_ffmt[type].code) + return type; + } while (type++ != SIZE_DEFAULT_FFMT); + + return 0; +} + +/** + * __find_resolution - Lookup preset and type of M-5MOLS's resolution + * @mf: pixel format to find/negotiate the resolution preset for + * @type: M-5MOLS resolution type + * @resolution: M-5MOLS resolution preset register value + * + * Find nearest resolution matching resolution preset and adjust mf + * to supported values. + */ +static int __find_resolution(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf, + enum m5mols_restype *type, + u32 *resolution) +{ + const struct m5mols_resolution *fsize = &m5mols_reg_res[0]; + const struct m5mols_resolution *match = NULL; + enum m5mols_restype stype = __find_restype(mf->code); + int i = ARRAY_SIZE(m5mols_reg_res); + unsigned int min_err = ~0; + + while (i--) { + int err; + if (stype == fsize->type) { + err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + + if (err < min_err) { + min_err = err; + match = fsize; + } + } + fsize++; + } + if (match) { + mf->width = match->width; + mf->height = match->height; + *resolution = match->reg; + *type = stype; + return 0; + } + + return -EINVAL; +} + +static struct v4l2_mbus_framefmt *__find_format(struct m5mols_info *info, + struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which, + enum m5mols_restype type) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return fh ? v4l2_subdev_get_try_format(fh, 0) : NULL; + + return &info->ffmt[type]; +} + +static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct m5mols_info *info = to_m5mols(sd); + struct v4l2_mbus_framefmt *format; + int ret = 0; + + mutex_lock(&info->lock); + + format = __find_format(info, fh, fmt->which, info->res_type); + if (format) + fmt->format = *format; + else + ret = -EINVAL; + + mutex_unlock(&info->lock); + return ret; +} + +static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct m5mols_info *info = to_m5mols(sd); + struct v4l2_mbus_framefmt *format = &fmt->format; + struct v4l2_mbus_framefmt *sfmt; + enum m5mols_restype type; + u32 resolution = 0; + int ret; + + ret = __find_resolution(sd, format, &type, &resolution); + if (ret < 0) + return ret; + + sfmt = __find_format(info, fh, fmt->which, type); + if (!sfmt) + return 0; + + mutex_lock(&info->lock); + + format->code = m5mols_default_ffmt[type].code; + format->colorspace = V4L2_COLORSPACE_JPEG; + format->field = V4L2_FIELD_NONE; + + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + *sfmt = *format; + info->resolution = resolution; + info->res_type = type; + } + + mutex_unlock(&info->lock); + return ret; +} + +static int m5mols_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd) +{ + struct m5mols_info *info = to_m5mols(sd); + + if (pad != 0 || fd == NULL) + return -EINVAL; + + mutex_lock(&info->lock); + /* + * .get_frame_desc is only used for compressed formats, + * thus we always return the capture frame parameters here. + */ + fd->entry[0].length = info->cap.buf_size; + fd->entry[0].pixelcode = info->ffmt[M5MOLS_RESTYPE_CAPTURE].code; + mutex_unlock(&info->lock); + + fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX; + fd->num_entries = 1; + + return 0; +} + +static int m5mols_set_frame_desc(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd) +{ + struct m5mols_info *info = to_m5mols(sd); + struct v4l2_mbus_framefmt *mf = &info->ffmt[M5MOLS_RESTYPE_CAPTURE]; + + if (pad != 0 || fd == NULL) + return -EINVAL; + + fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX; + fd->num_entries = 1; + fd->entry[0].length = clamp_t(u32, fd->entry[0].length, + mf->width * mf->height, + M5MOLS_MAIN_JPEG_SIZE_MAX); + mutex_lock(&info->lock); + info->cap.buf_size = fd->entry[0].length; + mutex_unlock(&info->lock); + + return 0; +} + + +static int m5mols_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (!code || code->index >= SIZE_DEFAULT_FFMT) + return -EINVAL; + + code->code = m5mols_default_ffmt[code->index].code; + + return 0; +} + +static struct v4l2_subdev_pad_ops m5mols_pad_ops = { + .enum_mbus_code = m5mols_enum_mbus_code, + .get_fmt = m5mols_get_fmt, + .set_fmt = m5mols_set_fmt, + .get_frame_desc = m5mols_get_frame_desc, + .set_frame_desc = m5mols_set_frame_desc, +}; + +/** + * m5mols_restore_controls - Apply current control values to the registers + * + * m5mols_do_scenemode() handles all parameters for which there is yet no + * individual control. It should be replaced at some point by setting each + * control individually, in required register set up order. + */ +int m5mols_restore_controls(struct m5mols_info *info) +{ + int ret; + + if (info->ctrl_sync) + return 0; + + ret = m5mols_do_scenemode(info, REG_SCENE_NORMAL); + if (ret) + return ret; + + ret = v4l2_ctrl_handler_setup(&info->handle); + info->ctrl_sync = !ret; + + return ret; +} + +/** + * m5mols_start_monitor - Start the monitor mode + * + * Before applying the controls setup the resolution and frame rate + * in PARAMETER mode, and then switch over to MONITOR mode. + */ +static int m5mols_start_monitor(struct m5mols_info *info) +{ + struct v4l2_subdev *sd = &info->sd; + int ret; + + ret = m5mols_set_mode(info, REG_PARAMETER); + if (!ret) + ret = m5mols_write(sd, PARM_MON_SIZE, info->resolution); + if (!ret) + ret = m5mols_write(sd, PARM_MON_FPS, REG_FPS_30); + if (!ret) + ret = m5mols_set_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_restore_controls(info); + + return ret; +} + +static int m5mols_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct m5mols_info *info = to_m5mols(sd); + u32 code; + int ret; + + mutex_lock(&info->lock); + code = info->ffmt[info->res_type].code; + + if (enable) { + if (is_code(code, M5MOLS_RESTYPE_MONITOR)) + ret = m5mols_start_monitor(info); + else if (is_code(code, M5MOLS_RESTYPE_CAPTURE)) + ret = m5mols_start_capture(info); + else + ret = -EINVAL; + } else { + ret = m5mols_set_mode(info, REG_PARAMETER); + } + + mutex_unlock(&info->lock); + return ret; +} + +static const struct v4l2_subdev_video_ops m5mols_video_ops = { + .s_stream = m5mols_s_stream, +}; + +static int m5mols_sensor_power(struct m5mols_info *info, bool enable) +{ + struct v4l2_subdev *sd = &info->sd; + struct i2c_client *client = v4l2_get_subdevdata(sd); + const struct m5mols_platform_data *pdata = info->pdata; + int ret; + + if (info->power == enable) + return 0; + + if (enable) { + if (info->set_power) { + ret = info->set_power(&client->dev, 1); + if (ret) + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies); + if (ret) { + info->set_power(&client->dev, 0); + return ret; + } + + gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity); + info->power = 1; + + return ret; + } + + ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies); + if (ret) + return ret; + + if (info->set_power) + info->set_power(&client->dev, 0); + + gpio_set_value(pdata->gpio_reset, pdata->reset_polarity); + + info->isp_ready = 0; + info->power = 0; + + return ret; +} + +/* m5mols_update_fw - optional firmware update routine */ +int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd, + int (*set_power)(struct m5mols_info *, bool)) +{ + return 0; +} + +/** + * m5mols_fw_start - M-5MOLS internal ARM controller initialization + * + * Execute the M-5MOLS internal ARM controller initialization sequence. + * This function should be called after the supply voltage has been + * applied and before any requests to the device are made. + */ +static int m5mols_fw_start(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + int ret; + + atomic_set(&info->irq_done, 0); + /* Wait until I2C slave is initialized in Flash Writer mode */ + ret = m5mols_busy_wait(sd, FLASH_CAM_START, REG_IN_FLASH_MODE, + M5MOLS_I2C_RDY_WAIT_FL | 0xff, -1); + if (!ret) + ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT); + if (!ret) + ret = m5mols_wait_interrupt(sd, REG_INT_MODE, 2000); + if (ret < 0) + return ret; + + info->isp_ready = 1; + + ret = m5mols_get_version(sd); + if (!ret) + ret = m5mols_update_fw(sd, m5mols_sensor_power); + if (ret) + return ret; + + v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n"); + + ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI); + if (!ret) + ret = m5mols_enable_interrupt(sd, + REG_INT_AF | REG_INT_CAPTURE); + + return ret; +} + +/* Execute the lens soft-landing algorithm */ +static int m5mols_auto_focus_stop(struct m5mols_info *info) +{ + int ret; + + ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP); + if (!ret) + ret = m5mols_write(&info->sd, AF_MODE, REG_AF_POWEROFF); + if (!ret) + ret = m5mols_busy_wait(&info->sd, SYSTEM_STATUS, REG_AF_IDLE, + 0xff, -1); + return ret; +} + +/** + * m5mols_s_power - Main sensor power control function + * + * To prevent breaking the lens when the sensor is powered off the Soft-Landing + * algorithm is called where available. The Soft-Landing algorithm availability + * dependends on the firmware provider. + */ +static int m5mols_s_power(struct v4l2_subdev *sd, int on) +{ + struct m5mols_info *info = to_m5mols(sd); + int ret; + + mutex_lock(&info->lock); + + if (on) { + ret = m5mols_sensor_power(info, true); + if (!ret) + ret = m5mols_fw_start(sd); + } else { + if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) { + ret = m5mols_set_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_auto_focus_stop(info); + if (ret < 0) + v4l2_warn(sd, "Soft landing lens failed\n"); + } + ret = m5mols_sensor_power(info, false); + + info->ctrl_sync = 0; + } + + mutex_unlock(&info->lock); + return ret; +} + +static int m5mols_log_status(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + + v4l2_ctrl_handler_log_status(&info->handle, sd->name); + + return 0; +} + +static const struct v4l2_subdev_core_ops m5mols_core_ops = { + .s_power = m5mols_s_power, + .log_status = m5mols_log_status, +}; + +/* + * V4L2 subdev internal operations + */ +static int m5mols_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); + + *format = m5mols_default_ffmt[0]; + return 0; +} + +static const struct v4l2_subdev_internal_ops m5mols_subdev_internal_ops = { + .open = m5mols_open, +}; + +static const struct v4l2_subdev_ops m5mols_ops = { + .core = &m5mols_core_ops, + .pad = &m5mols_pad_ops, + .video = &m5mols_video_ops, +}; + +static irqreturn_t m5mols_irq_handler(int irq, void *data) +{ + struct m5mols_info *info = to_m5mols(data); + + atomic_set(&info->irq_done, 1); + wake_up_interruptible(&info->irq_waitq); + + return IRQ_HANDLED; +} + +static int m5mols_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct m5mols_platform_data *pdata = client->dev.platform_data; + struct m5mols_info *info; + struct v4l2_subdev *sd; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!gpio_is_valid(pdata->gpio_reset)) { + dev_err(&client->dev, "No valid RESET GPIO specified\n"); + return -EINVAL; + } + + if (!client->irq) { + dev_err(&client->dev, "Interrupt not assigned\n"); + return -EINVAL; + } + + info = kzalloc(sizeof(struct m5mols_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pdata = pdata; + info->set_power = pdata->set_power; + + ret = gpio_request(pdata->gpio_reset, "M5MOLS_NRST"); + if (ret) { + dev_err(&client->dev, "Failed to request gpio: %d\n", ret); + goto out_free; + } + gpio_direction_output(pdata->gpio_reset, pdata->reset_polarity); + + ret = regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), supplies); + if (ret) { + dev_err(&client->dev, "Failed to get regulators: %d\n", ret); + goto out_gpio; + } + + sd = &info->sd; + v4l2_i2c_subdev_init(sd, client, &m5mols_ops); + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + sd->internal_ops = &m5mols_subdev_internal_ops; + info->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sd->entity, 1, &info->pad, 0); + if (ret < 0) + goto out_reg; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + + init_waitqueue_head(&info->irq_waitq); + mutex_init(&info->lock); + + ret = request_irq(client->irq, m5mols_irq_handler, + IRQF_TRIGGER_RISING, MODULE_NAME, sd); + if (ret) { + dev_err(&client->dev, "Interrupt request failed: %d\n", ret); + goto out_me; + } + info->res_type = M5MOLS_RESTYPE_MONITOR; + info->ffmt[0] = m5mols_default_ffmt[0]; + info->ffmt[1] = m5mols_default_ffmt[1]; + + ret = m5mols_sensor_power(info, true); + if (ret) + goto out_irq; + + ret = m5mols_fw_start(sd); + if (!ret) + ret = m5mols_init_controls(sd); + + ret = m5mols_sensor_power(info, false); + if (!ret) + return 0; +out_irq: + free_irq(client->irq, sd); +out_me: + media_entity_cleanup(&sd->entity); +out_reg: + regulator_bulk_free(ARRAY_SIZE(supplies), supplies); +out_gpio: + gpio_free(pdata->gpio_reset); +out_free: + kfree(info); + return ret; +} + +static int m5mols_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct m5mols_info *info = to_m5mols(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + free_irq(client->irq, sd); + + regulator_bulk_free(ARRAY_SIZE(supplies), supplies); + gpio_free(info->pdata->gpio_reset); + media_entity_cleanup(&sd->entity); + kfree(info); + return 0; +} + +static const struct i2c_device_id m5mols_id[] = { + { MODULE_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, m5mols_id); + +static struct i2c_driver m5mols_i2c_driver = { + .driver = { + .name = MODULE_NAME, + }, + .probe = m5mols_probe, + .remove = m5mols_remove, + .id_table = m5mols_id, +}; + +module_i2c_driver(m5mols_i2c_driver); + +MODULE_AUTHOR("HeungJun Kim "); +MODULE_AUTHOR("Dongsoo Kim "); +MODULE_DESCRIPTION("Fujitsu M-5MOLS 8M Pixel camera driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/m5mols/m5mols_reg.h b/drivers/media/i2c/m5mols/m5mols_reg.h new file mode 100644 index 00000000..58d80275 --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols_reg.h @@ -0,0 +1,363 @@ +/* + * Register map for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef M5MOLS_REG_H +#define M5MOLS_REG_H + +#define M5MOLS_I2C_MAX_SIZE 4 +#define M5MOLS_BYTE_READ 0x01 +#define M5MOLS_BYTE_WRITE 0x02 + +#define I2C_CATEGORY(__cat) ((__cat >> 16) & 0xff) +#define I2C_COMMAND(__comm) ((__comm >> 8) & 0xff) +#define I2C_SIZE(__reg_s) ((__reg_s) & 0xff) +#define I2C_REG(__cat, __cmd, __reg_s) ((__cat << 16) | (__cmd << 8) | __reg_s) + +/* + * Category section register + * + * The category means set including relevant command of M-5MOLS. + */ +#define CAT_SYSTEM 0x00 +#define CAT_PARAM 0x01 +#define CAT_MONITOR 0x02 +#define CAT_AE 0x03 +#define CAT_WB 0x06 +#define CAT_EXIF 0x07 +#define CAT_FD 0x09 +#define CAT_LENS 0x0a +#define CAT_CAPT_PARM 0x0b +#define CAT_CAPT_CTRL 0x0c +#define CAT_FLASH 0x0f /* related to FW, revisions, booting */ + +/* + * Category 0 - SYSTEM mode + * + * The SYSTEM mode in the M-5MOLS means area available to handle with the whole + * & all-round system of sensor. It deals with version/interrupt/setting mode & + * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by + * packaging & manufacturer, even the customer and project code. And the + * function details may vary among them. The version information helps to + * determine what methods shall be used in the driver. + * + * There is many registers between customer version address and awb one. For + * more specific contents, see definition if file m5mols.h. + */ +#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, 0x00, 1) +#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, 0x01, 1) +#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, 0x02, 2) +#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, 0x04, 2) +#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, 0x06, 2) +#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, 0x08, 2) + +#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, 0x0b, 1) +#define REG_SYSINIT 0x00 /* SYSTEM mode */ +#define REG_PARAMETER 0x01 /* PARAMETER mode */ +#define REG_MONITOR 0x02 /* MONITOR mode */ +#define REG_CAPTURE 0x03 /* CAPTURE mode */ + +#define SYSTEM_CMD(__cmd) I2C_REG(CAT_SYSTEM, cmd, 1) +#define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, 0x0a, 1) +#define REG_SAMSUNG_ELECTRO "SE" /* Samsung Electro-Mechanics */ +#define REG_SAMSUNG_OPTICS "OP" /* Samsung Fiber-Optics */ +#define REG_SAMSUNG_TECHWIN "TB" /* Samsung Techwin */ +/* SYSTEM mode status */ +#define SYSTEM_STATUS I2C_REG(CAT_SYSTEM, 0x0c, 1) + +/* Interrupt pending register */ +#define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, 0x10, 1) +/* interrupt enable register */ +#define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, 0x11, 1) +#define REG_INT_MODE (1 << 0) +#define REG_INT_AF (1 << 1) +#define REG_INT_ZOOM (1 << 2) +#define REG_INT_CAPTURE (1 << 3) +#define REG_INT_FRAMESYNC (1 << 4) +#define REG_INT_FD (1 << 5) +#define REG_INT_LENS_INIT (1 << 6) +#define REG_INT_SOUND (1 << 7) +#define REG_INT_MASK 0x0f + +/* + * category 1 - PARAMETER mode + * + * This category supports function of camera features of M-5MOLS. It means we + * can handle with preview(MONITOR) resolution size/frame per second/interface + * between the sensor and the Application Processor/even the image effect. + */ + +/* Resolution in the MONITOR mode */ +#define PARM_MON_SIZE I2C_REG(CAT_PARAM, 0x01, 1) + +/* Frame rate */ +#define PARM_MON_FPS I2C_REG(CAT_PARAM, 0x02, 1) +#define REG_FPS_30 0x02 + +/* Video bus between the sensor and a host processor */ +#define PARM_INTERFACE I2C_REG(CAT_PARAM, 0x00, 1) +#define REG_INTERFACE_MIPI 0x02 + +/* Image effects */ +#define PARM_EFFECT I2C_REG(CAT_PARAM, 0x0b, 1) +#define REG_EFFECT_OFF 0x00 +#define REG_EFFECT_NEGA 0x01 +#define REG_EFFECT_EMBOSS 0x06 +#define REG_EFFECT_OUTLINE 0x07 +#define REG_EFFECT_WATERCOLOR 0x08 + +/* + * Category 2 - MONITOR mode + * + * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another + * mode named "Preview", but this preview mode is used at the case specific + * vider-recording mode. This mmode supports only YUYV format. On the other + * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are + * another options like zoom/color effect(different with effect in PARAMETER + * mode)/anti hand shaking algorithm. + */ + +/* Target digital zoom position */ +#define MON_ZOOM I2C_REG(CAT_MONITOR, 0x01, 1) + +/* CR value for color effect */ +#define MON_CFIXR I2C_REG(CAT_MONITOR, 0x0a, 1) +/* CB value for color effect */ +#define MON_CFIXB I2C_REG(CAT_MONITOR, 0x09, 1) +#define REG_CFIXB_SEPIA 0xd8 +#define REG_CFIXR_SEPIA 0x18 + +#define MON_EFFECT I2C_REG(CAT_MONITOR, 0x0b, 1) +#define REG_COLOR_EFFECT_OFF 0x00 +#define REG_COLOR_EFFECT_ON 0x01 + +/* Chroma enable */ +#define MON_CHROMA_EN I2C_REG(CAT_MONITOR, 0x10, 1) +/* Chroma level */ +#define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, 0x0f, 1) +#define REG_CHROMA_OFF 0x00 +#define REG_CHROMA_ON 0x01 + +/* Sharpness on/off */ +#define MON_EDGE_EN I2C_REG(CAT_MONITOR, 0x12, 1) +/* Sharpness level */ +#define MON_EDGE_LVL I2C_REG(CAT_MONITOR, 0x11, 1) +#define REG_EDGE_OFF 0x00 +#define REG_EDGE_ON 0x01 + +/* Set color tone (contrast) */ +#define MON_TONE_CTL I2C_REG(CAT_MONITOR, 0x25, 1) + +/* + * Category 3 - Auto Exposure + * + * The M-5MOLS exposure capbility is detailed as which is similar to digital + * camera. This category supports AE locking/various AE mode(range of exposure) + * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the + * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be + * different. So, this category also provide getting the max/min values. And, + * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values. + */ + +/* Auto Exposure locking */ +#define AE_LOCK I2C_REG(CAT_AE, 0x00, 1) +#define REG_AE_UNLOCK 0x00 +#define REG_AE_LOCK 0x01 + +/* Auto Exposure algorithm mode */ +#define AE_MODE I2C_REG(CAT_AE, 0x01, 1) +#define REG_AE_OFF 0x00 /* AE off */ +#define REG_AE_ALL 0x01 /* calc AE in all block integral */ +#define REG_AE_CENTER 0x03 /* calc AE in center weighted */ +#define REG_AE_SPOT 0x06 /* calc AE in specific spot */ + +#define AE_ISO I2C_REG(CAT_AE, 0x05, 1) +#define REG_ISO_AUTO 0x00 +#define REG_ISO_50 0x01 +#define REG_ISO_100 0x02 +#define REG_ISO_200 0x03 +#define REG_ISO_400 0x04 +#define REG_ISO_800 0x05 + +/* EV (scenemode) preset for MONITOR */ +#define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, 0x0a, 1) +/* EV (scenemode) preset for CAPTURE */ +#define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, 0x0b, 1) +#define REG_SCENE_NORMAL 0x00 +#define REG_SCENE_PORTRAIT 0x01 +#define REG_SCENE_LANDSCAPE 0x02 +#define REG_SCENE_SPORTS 0x03 +#define REG_SCENE_PARTY_INDOOR 0x04 +#define REG_SCENE_BEACH_SNOW 0x05 +#define REG_SCENE_SUNSET 0x06 +#define REG_SCENE_DAWN_DUSK 0x07 +#define REG_SCENE_FALL 0x08 +#define REG_SCENE_NIGHT 0x09 +#define REG_SCENE_AGAINST_LIGHT 0x0a +#define REG_SCENE_FIRE 0x0b +#define REG_SCENE_TEXT 0x0c +#define REG_SCENE_CANDLE 0x0d + +/* Manual gain in MONITOR mode */ +#define AE_MAN_GAIN_MON I2C_REG(CAT_AE, 0x12, 2) +/* Maximum gain in MONITOR mode */ +#define AE_MAX_GAIN_MON I2C_REG(CAT_AE, 0x1a, 2) +/* Manual gain in CAPTURE mode */ +#define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, 0x26, 2) + +#define AE_INDEX I2C_REG(CAT_AE, 0x38, 1) +#define REG_AE_INDEX_20_NEG 0x00 +#define REG_AE_INDEX_15_NEG 0x01 +#define REG_AE_INDEX_10_NEG 0x02 +#define REG_AE_INDEX_05_NEG 0x03 +#define REG_AE_INDEX_00 0x04 +#define REG_AE_INDEX_05_POS 0x05 +#define REG_AE_INDEX_10_POS 0x06 +#define REG_AE_INDEX_15_POS 0x07 +#define REG_AE_INDEX_20_POS 0x08 + +/* + * Category 6 - White Balance + */ + +/* Auto Whitebalance locking */ +#define AWB_LOCK I2C_REG(CAT_WB, 0x00, 1) +#define REG_AWB_UNLOCK 0x00 +#define REG_AWB_LOCK 0x01 + +#define AWB_MODE I2C_REG(CAT_WB, 0x02, 1) +#define REG_AWB_AUTO 0x01 /* AWB off */ +#define REG_AWB_PRESET 0x02 /* AWB preset */ + +/* Manual WB (preset) */ +#define AWB_MANUAL I2C_REG(CAT_WB, 0x03, 1) +#define REG_AWB_INCANDESCENT 0x01 +#define REG_AWB_FLUORESCENT_1 0x02 +#define REG_AWB_FLUORESCENT_2 0x03 +#define REG_AWB_DAYLIGHT 0x04 +#define REG_AWB_CLOUDY 0x05 +#define REG_AWB_SHADE 0x06 +#define REG_AWB_HORIZON 0x07 +#define REG_AWB_LEDLIGHT 0x09 + +/* + * Category 7 - EXIF information + */ +#define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, 0x00, 4) +#define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, 0x04, 4) +#define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, 0x08, 4) +#define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, 0x0c, 4) +#define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, 0x10, 4) +#define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, 0x14, 4) +#define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, 0x18, 4) +#define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, 0x1c, 4) +#define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, 0x20, 4) +#define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, 0x24, 4) +#define EXIF_INFO_ISO I2C_REG(CAT_EXIF, 0x28, 2) +#define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, 0x2a, 2) +#define EXIF_INFO_SDR I2C_REG(CAT_EXIF, 0x2c, 2) +#define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, 0x2e, 2) + +/* + * Category 9 - Face Detection + */ +#define FD_CTL I2C_REG(CAT_FD, 0x00, 1) +#define BIT_FD_EN 0 +#define BIT_FD_DRAW_FACE_FRAME 4 +#define BIT_FD_DRAW_SMILE_LVL 6 +#define REG_FD(shift) (1 << shift) +#define REG_FD_OFF 0x0 + +/* + * Category A - Lens Parameter + */ +#define AF_MODE I2C_REG(CAT_LENS, 0x01, 1) +#define REG_AF_NORMAL 0x00 /* Normal AF, one time */ +#define REG_AF_MACRO 0x01 /* Macro AF, one time */ +#define REG_AF_POWEROFF 0x07 + +#define AF_EXECUTE I2C_REG(CAT_LENS, 0x02, 1) +#define REG_AF_STOP 0x00 +#define REG_AF_EXE_AUTO 0x01 +#define REG_AF_EXE_CAF 0x02 + +#define AF_STATUS I2C_REG(CAT_LENS, 0x03, 1) +#define REG_AF_FAIL 0x00 +#define REG_AF_SUCCESS 0x02 +#define REG_AF_IDLE 0x04 +#define REG_AF_BUSY 0x05 + +#define AF_VERSION I2C_REG(CAT_LENS, 0x0a, 1) + +/* + * Category B - CAPTURE Parameter + */ +#define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, 0x00, 1) +#define REG_YUV422 0x00 +#define REG_BAYER10 0x05 +#define REG_BAYER8 0x06 +#define REG_JPEG 0x10 + +#define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, 0x01, 1) +#define CAPP_JPEG_SIZE_MAX I2C_REG(CAT_CAPT_PARM, 0x0f, 4) +#define CAPP_JPEG_RATIO I2C_REG(CAT_CAPT_PARM, 0x17, 1) + +#define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, 0x1d, 1) +#define REG_MCC_OFF 0x00 +#define REG_MCC_NORMAL 0x01 + +#define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, 0x2c, 1) +#define REG_WDR_OFF 0x00 +#define REG_WDR_ON 0x01 +#define REG_WDR_AUTO 0x02 + +#define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, 0x40, 1) +#define REG_LIGHT_OFF 0x00 +#define REG_LIGHT_ON 0x01 +#define REG_LIGHT_AUTO 0x02 + +#define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, 0x41, 1) +#define REG_FLASH_OFF 0x00 +#define REG_FLASH_ON 0x01 +#define REG_FLASH_AUTO 0x02 + +/* + * Category C - CAPTURE Control + */ +#define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, 0x00, 1) +#define REG_CAP_NONE 0x00 +#define REG_CAP_ANTI_SHAKE 0x02 + +/* Select single- or multi-shot capture */ +#define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, 0x06, 1) + +#define CAPC_START I2C_REG(CAT_CAPT_CTRL, 0x09, 1) +#define REG_CAP_START_MAIN 0x01 +#define REG_CAP_START_THUMB 0x03 + +#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, 0x0d, 4) +#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, 0x11, 4) + +/* + * Category F - Flash + * + * This mode provides functions about internal flash stuff and system startup. + */ + +/* Starts internal ARM core booting after power-up */ +#define FLASH_CAM_START I2C_REG(CAT_FLASH, 0x12, 1) +#define REG_START_ARM_BOOT 0x01 /* write value */ +#define REG_IN_FLASH_MODE 0x00 /* read value */ + +#endif /* M5MOLS_REG_H */ diff --git a/drivers/media/i2c/msp3400-driver.c b/drivers/media/i2c/msp3400-driver.c new file mode 100644 index 00000000..54a9dd39 --- /dev/null +++ b/drivers/media/i2c/msp3400-driver.c @@ -0,0 +1,927 @@ +/* + * Programming the mspx4xx sound processor family + * + * (c) 1997-2001 Gerd Knorr + * + * what works and what doesn't: + * + * AM-Mono + * Support for Hauppauge cards added (decoding handled by tuner) added by + * Frederic Crozat + * + * FM-Mono + * should work. The stereo modes are backward compatible to FM-mono, + * therefore FM-Mono should be allways available. + * + * FM-Stereo (B/G, used in germany) + * should work, with autodetect + * + * FM-Stereo (satellite) + * should work, no autodetect (i.e. default is mono, but you can + * switch to stereo -- untested) + * + * NICAM (B/G, L , used in UK, Scandinavia, Spain and France) + * should work, with autodetect. Support for NICAM was added by + * Pekka Pietikainen + * + * TODO: + * - better SAT support + * + * 980623 Thomas Sailer (sailer@ife.ee.ethz.ch) + * using soundcore instead of OSS + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "msp3400-driver.h" + +/* ---------------------------------------------------------------------- */ + +MODULE_DESCRIPTION("device driver for msp34xx TV sound processor"); +MODULE_AUTHOR("Gerd Knorr"); +MODULE_LICENSE("GPL"); + +/* module parameters */ +static int opmode = OPMODE_AUTO; +int msp_debug; /* msp_debug output */ +bool msp_once; /* no continuous stereo monitoring */ +bool msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), + the autoscan seems work well only with FM... */ +int msp_standard = 1; /* Override auto detect of audio msp_standard, + if needed. */ +bool msp_dolby; + +int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual + (msp34xxg only) 0x00a0-0x03c0 */ + +/* read-only */ +module_param(opmode, int, 0444); + +/* read-write */ +module_param_named(once, msp_once, bool, 0644); +module_param_named(debug, msp_debug, int, 0644); +module_param_named(stereo_threshold, msp_stereo_thresh, int, 0644); +module_param_named(standard, msp_standard, int, 0644); +module_param_named(amsound, msp_amsound, bool, 0644); +module_param_named(dolby, msp_dolby, bool, 0644); + +MODULE_PARM_DESC(opmode, "Forces a MSP3400 opmode. 0=Manual, 1=Autodetect, 2=Autodetect and autoselect"); +MODULE_PARM_DESC(once, "No continuous stereo monitoring"); +MODULE_PARM_DESC(debug, "Enable debug messages [0-3]"); +MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo"); +MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect"); +MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan"); +MODULE_PARM_DESC(dolby, "Activates Dolby processing"); + +/* ---------------------------------------------------------------------- */ + +/* control subaddress */ +#define I2C_MSP_CONTROL 0x00 +/* demodulator unit subaddress */ +#define I2C_MSP_DEM 0x10 +/* DSP unit subaddress */ +#define I2C_MSP_DSP 0x12 + + +/* ----------------------------------------------------------------------- */ +/* functions for talking to the MSP3400C Sound processor */ + +int msp_reset(struct i2c_client *client) +{ + /* reset and read revision code */ + static u8 reset_off[3] = { I2C_MSP_CONTROL, 0x80, 0x00 }; + static u8 reset_on[3] = { I2C_MSP_CONTROL, 0x00, 0x00 }; + static u8 write[3] = { I2C_MSP_DSP + 1, 0x00, 0x1e }; + u8 read[2]; + struct i2c_msg reset[2] = { + { + .addr = client->addr, + .flags = I2C_M_IGNORE_NAK, + .len = 3, + .buf = reset_off + }, + { + .addr = client->addr, + .flags = I2C_M_IGNORE_NAK, + .len = 3, + .buf = reset_on + }, + }; + struct i2c_msg test[2] = { + { + .addr = client->addr, + .len = 3, + .buf = write + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 2, + .buf = read + }, + }; + + v4l_dbg(3, msp_debug, client, "msp_reset\n"); + if (i2c_transfer(client->adapter, &reset[0], 1) != 1 || + i2c_transfer(client->adapter, &reset[1], 1) != 1 || + i2c_transfer(client->adapter, test, 2) != 2) { + v4l_err(client, "chip reset failed\n"); + return -1; + } + return 0; +} + +static int msp_read(struct i2c_client *client, int dev, int addr) +{ + int err, retval; + u8 write[3]; + u8 read[2]; + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .len = 3, + .buf = write + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 2, + .buf = read + } + }; + + write[0] = dev + 1; + write[1] = addr >> 8; + write[2] = addr & 0xff; + + for (err = 0; err < 3; err++) { + if (i2c_transfer(client->adapter, msgs, 2) == 2) + break; + v4l_warn(client, "I/O error #%d (read 0x%02x/0x%02x)\n", err, + dev, addr); + schedule_timeout_interruptible(msecs_to_jiffies(10)); + } + if (err == 3) { + v4l_warn(client, "resetting chip, sound will go off.\n"); + msp_reset(client); + return -1; + } + retval = read[0] << 8 | read[1]; + v4l_dbg(3, msp_debug, client, "msp_read(0x%x, 0x%x): 0x%x\n", + dev, addr, retval); + return retval; +} + +int msp_read_dem(struct i2c_client *client, int addr) +{ + return msp_read(client, I2C_MSP_DEM, addr); +} + +int msp_read_dsp(struct i2c_client *client, int addr) +{ + return msp_read(client, I2C_MSP_DSP, addr); +} + +static int msp_write(struct i2c_client *client, int dev, int addr, int val) +{ + int err; + u8 buffer[5]; + + buffer[0] = dev; + buffer[1] = addr >> 8; + buffer[2] = addr & 0xff; + buffer[3] = val >> 8; + buffer[4] = val & 0xff; + + v4l_dbg(3, msp_debug, client, "msp_write(0x%x, 0x%x, 0x%x)\n", + dev, addr, val); + for (err = 0; err < 3; err++) { + if (i2c_master_send(client, buffer, 5) == 5) + break; + v4l_warn(client, "I/O error #%d (write 0x%02x/0x%02x)\n", err, + dev, addr); + schedule_timeout_interruptible(msecs_to_jiffies(10)); + } + if (err == 3) { + v4l_warn(client, "resetting chip, sound will go off.\n"); + msp_reset(client); + return -1; + } + return 0; +} + +int msp_write_dem(struct i2c_client *client, int addr, int val) +{ + return msp_write(client, I2C_MSP_DEM, addr, val); +} + +int msp_write_dsp(struct i2c_client *client, int addr, int val) +{ + return msp_write(client, I2C_MSP_DSP, addr, val); +} + +/* ----------------------------------------------------------------------- * + * bits 9 8 5 - SCART DSP input Select: + * 0 0 0 - SCART 1 to DSP input (reset position) + * 0 1 0 - MONO to DSP input + * 1 0 0 - SCART 2 to DSP input + * 1 1 1 - Mute DSP input + * + * bits 11 10 6 - SCART 1 Output Select: + * 0 0 0 - undefined (reset position) + * 0 1 0 - SCART 2 Input to SCART 1 Output (for devices with 2 SCARTS) + * 1 0 0 - MONO input to SCART 1 Output + * 1 1 0 - SCART 1 DA to SCART 1 Output + * 0 0 1 - SCART 2 DA to SCART 1 Output + * 0 1 1 - SCART 1 Input to SCART 1 Output + * 1 1 1 - Mute SCART 1 Output + * + * bits 13 12 7 - SCART 2 Output Select (for devices with 2 Output SCART): + * 0 0 0 - SCART 1 DA to SCART 2 Output (reset position) + * 0 1 0 - SCART 1 Input to SCART 2 Output + * 1 0 0 - MONO input to SCART 2 Output + * 0 0 1 - SCART 2 DA to SCART 2 Output + * 0 1 1 - SCART 2 Input to SCART 2 Output + * 1 1 0 - Mute SCART 2 Output + * + * Bits 4 to 0 should be zero. + * ----------------------------------------------------------------------- */ + +static int scarts[3][9] = { + /* MASK IN1 IN2 IN3 IN4 IN1_DA IN2_DA MONO MUTE */ + /* SCART DSP Input select */ + { 0x0320, 0x0000, 0x0200, 0x0300, 0x0020, -1, -1, 0x0100, 0x0320 }, + /* SCART1 Output select */ + { 0x0c40, 0x0440, 0x0400, 0x0000, 0x0840, 0x0c00, 0x0040, 0x0800, 0x0c40 }, + /* SCART2 Output select */ + { 0x3080, 0x1000, 0x1080, 0x2080, 0x3080, 0x0000, 0x0080, 0x2000, 0x3000 }, +}; + +static char *scart_names[] = { + "in1", "in2", "in3", "in4", "in1 da", "in2 da", "mono", "mute" +}; + +void msp_set_scart(struct i2c_client *client, int in, int out) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + state->in_scart = in; + + if (in >= 0 && in <= 7 && out >= 0 && out <= 2) { + if (-1 == scarts[out][in + 1]) + return; + + state->acb &= ~scarts[out][0]; + state->acb |= scarts[out][in + 1]; + } else + state->acb = 0xf60; /* Mute Input and SCART 1 Output */ + + v4l_dbg(1, msp_debug, client, "scart switch: %s => %d (ACB=0x%04x)\n", + scart_names[in], out, state->acb); + msp_write_dsp(client, 0x13, state->acb); + + /* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */ + if (state->has_i2s_conf) + msp_write_dem(client, 0x40, state->i2s_mode); +} + +/* ------------------------------------------------------------------------ */ + +static void msp_wake_thread(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (NULL == state->kthread) + return; + state->watch_stereo = 0; + state->restart = 1; + wake_up_interruptible(&state->wq); +} + +int msp_sleep(struct msp_state *state, int timeout) +{ + DECLARE_WAITQUEUE(wait, current); + + add_wait_queue(&state->wq, &wait); + if (!kthread_should_stop()) { + if (timeout < 0) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } else { + schedule_timeout_interruptible + (msecs_to_jiffies(timeout)); + } + } + + remove_wait_queue(&state->wq, &wait); + try_to_freeze(); + return state->restart; +} + +/* ------------------------------------------------------------------------ */ + +static int msp_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct msp_state *state = ctrl_to_state(ctrl); + struct i2c_client *client = v4l2_get_subdevdata(&state->sd); + int val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: { + /* audio volume cluster */ + int reallymuted = state->muted->val | state->scan_in_progress; + + if (!reallymuted) + val = (val * 0x7f / 65535) << 8; + + v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n", + state->muted->val ? "on" : "off", + state->scan_in_progress ? "yes" : "no", + state->volume->val); + + msp_write_dsp(client, 0x0000, val); + msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1)); + if (state->has_scart2_out_volume) + msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1)); + if (state->has_headphones) + msp_write_dsp(client, 0x0006, val); + break; + } + + case V4L2_CID_AUDIO_BASS: + val = ((val - 32768) * 0x60 / 65535) << 8; + msp_write_dsp(client, 0x0002, val); + if (state->has_headphones) + msp_write_dsp(client, 0x0031, val); + break; + + case V4L2_CID_AUDIO_TREBLE: + val = ((val - 32768) * 0x60 / 65535) << 8; + msp_write_dsp(client, 0x0003, val); + if (state->has_headphones) + msp_write_dsp(client, 0x0032, val); + break; + + case V4L2_CID_AUDIO_LOUDNESS: + val = val ? ((5 * 4) << 8) : 0; + msp_write_dsp(client, 0x0004, val); + if (state->has_headphones) + msp_write_dsp(client, 0x0033, val); + break; + + case V4L2_CID_AUDIO_BALANCE: + val = (u8)((val / 256) - 128); + msp_write_dsp(client, 0x0001, val << 8); + if (state->has_headphones) + msp_write_dsp(client, 0x0030, val << 8); + break; + + default: + return -EINVAL; + } + return 0; +} + +void msp_update_volume(struct msp_state *state) +{ + /* Force an update of the volume/mute cluster */ + v4l2_ctrl_lock(state->volume); + state->volume->val = state->volume->cur.val; + state->muted->val = state->muted->cur.val; + msp_s_ctrl(state->volume); + v4l2_ctrl_unlock(state->volume); +} + +/* --- v4l2 ioctls --- */ +static int msp_s_radio(struct v4l2_subdev *sd) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (state->radio) + return 0; + state->radio = 1; + v4l_dbg(1, msp_debug, client, "switching to radio mode\n"); + state->watch_stereo = 0; + switch (state->opmode) { + case OPMODE_MANUAL: + /* set msp3400 to FM radio mode */ + msp3400c_set_mode(client, MSP_MODE_FM_RADIO); + msp3400c_set_carrier(client, MSP_CARRIER(10.7), + MSP_CARRIER(10.7)); + msp_update_volume(state); + break; + case OPMODE_AUTODETECT: + case OPMODE_AUTOSELECT: + /* the thread will do for us */ + msp_wake_thread(client); + break; + } + return 0; +} + +static int msp_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* new channel -- kick audio carrier scan */ + msp_wake_thread(client); + return 0; +} + +static int msp_querystd(struct v4l2_subdev *sd, v4l2_std_id *id) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + *id &= state->detected_std; + + v4l_dbg(2, msp_debug, client, + "detected standard: %s(0x%08Lx)\n", + msp_standard_std_name(state->std), state->detected_std); + + return 0; +} + +static int msp_s_std(struct v4l2_subdev *sd, v4l2_std_id id) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int update = state->radio || state->v4l2_std != id; + + state->v4l2_std = id; + state->radio = 0; + if (update) + msp_wake_thread(client); + return 0; +} + +static int msp_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int tuner = (input >> 3) & 1; + int sc_in = input & 0x7; + int sc1_out = output & 0xf; + int sc2_out = (output >> 4) & 0xf; + u16 val, reg; + int i; + int extern_input = 1; + + if (state->route_in == input && state->route_out == output) + return 0; + state->route_in = input; + state->route_out = output; + /* check if the tuner input is used */ + for (i = 0; i < 5; i++) { + if (((input >> (4 + i * 4)) & 0xf) == 0) + extern_input = 0; + } + state->mode = extern_input ? MSP_MODE_EXTERN : MSP_MODE_AM_DETECT; + state->rxsubchans = V4L2_TUNER_SUB_STEREO; + msp_set_scart(client, sc_in, 0); + msp_set_scart(client, sc1_out, 1); + msp_set_scart(client, sc2_out, 2); + msp_set_audmode(client); + reg = (state->opmode == OPMODE_AUTOSELECT) ? 0x30 : 0xbb; + val = msp_read_dem(client, reg); + msp_write_dem(client, reg, (val & ~0x100) | (tuner << 8)); + /* wake thread when a new input is chosen */ + msp_wake_thread(client); + return 0; +} + +static int msp_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (vt->type != V4L2_TUNER_ANALOG_TV) + return 0; + if (!state->radio) { + if (state->opmode == OPMODE_AUTOSELECT) + msp_detect_stereo(client); + vt->rxsubchans = state->rxsubchans; + } + vt->audmode = state->audmode; + vt->capability |= V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; + return 0; +} + +static int msp_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (state->radio) /* TODO: add mono/stereo support for radio */ + return 0; + if (state->audmode == vt->audmode) + return 0; + state->audmode = vt->audmode; + /* only set audmode */ + msp_set_audmode(client); + return 0; +} + +static int msp_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + v4l_dbg(1, msp_debug, client, "Setting I2S speed to %d\n", freq); + + switch (freq) { + case 1024000: + state->i2s_mode = 0; + break; + case 2048000: + state->i2s_mode = 1; + break; + default: + return -EINVAL; + } + return 0; +} + +static int msp_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->ident, + (state->rev1 << 16) | state->rev2); +} + +static int msp_log_status(struct v4l2_subdev *sd) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + const char *p; + char prefix[V4L2_SUBDEV_NAME_SIZE + 20]; + + if (state->opmode == OPMODE_AUTOSELECT) + msp_detect_stereo(client); + v4l_info(client, "%s rev1 = 0x%04x rev2 = 0x%04x\n", + client->name, state->rev1, state->rev2); + snprintf(prefix, sizeof(prefix), "%s: Audio: ", sd->name); + v4l2_ctrl_handler_log_status(&state->hdl, prefix); + switch (state->mode) { + case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break; + case MSP_MODE_FM_RADIO: p = "FM Radio"; break; + case MSP_MODE_FM_TERRA: p = "Terrestrial FM-mono/stereo"; break; + case MSP_MODE_FM_SAT: p = "Satellite FM-mono"; break; + case MSP_MODE_FM_NICAM1: p = "NICAM/FM (B/G, D/K)"; break; + case MSP_MODE_FM_NICAM2: p = "NICAM/FM (I)"; break; + case MSP_MODE_AM_NICAM: p = "NICAM/AM (L)"; break; + case MSP_MODE_BTSC: p = "BTSC"; break; + case MSP_MODE_EXTERN: p = "External input"; break; + default: p = "unknown"; break; + } + if (state->mode == MSP_MODE_EXTERN) { + v4l_info(client, "Mode: %s\n", p); + } else if (state->opmode == OPMODE_MANUAL) { + v4l_info(client, "Mode: %s (%s%s)\n", p, + (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono", + (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : ""); + } else { + if (state->opmode == OPMODE_AUTODETECT) + v4l_info(client, "Mode: %s\n", p); + v4l_info(client, "Standard: %s (%s%s)\n", + msp_standard_std_name(state->std), + (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono", + (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : ""); + } + v4l_info(client, "Audmode: 0x%04x\n", state->audmode); + v4l_info(client, "Routing: 0x%08x (input) 0x%08x (output)\n", + state->route_in, state->route_out); + v4l_info(client, "ACB: 0x%04x\n", state->acb); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int msp_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + v4l_dbg(1, msp_debug, client, "suspend\n"); + msp_reset(client); + return 0; +} + +static int msp_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + v4l_dbg(1, msp_debug, client, "resume\n"); + msp_wake_thread(client); + return 0; +} +#endif + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops msp_ctrl_ops = { + .s_ctrl = msp_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops msp_core_ops = { + .log_status = msp_log_status, + .g_chip_ident = msp_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = msp_s_std, +}; + +static const struct v4l2_subdev_video_ops msp_video_ops = { + .querystd = msp_querystd, +}; + +static const struct v4l2_subdev_tuner_ops msp_tuner_ops = { + .s_frequency = msp_s_frequency, + .g_tuner = msp_g_tuner, + .s_tuner = msp_s_tuner, + .s_radio = msp_s_radio, +}; + +static const struct v4l2_subdev_audio_ops msp_audio_ops = { + .s_routing = msp_s_routing, + .s_i2s_clock_freq = msp_s_i2s_clock_freq, +}; + +static const struct v4l2_subdev_ops msp_ops = { + .core = &msp_core_ops, + .video = &msp_video_ops, + .tuner = &msp_tuner_ops, + .audio = &msp_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct msp_state *state; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + int (*thread_func)(void *data) = NULL; + int msp_hard; + int msp_family; + int msp_revision; + int msp_product, msp_prod_hi, msp_prod_lo; + int msp_rom; + + if (!id) + strlcpy(client->name, "msp3400", sizeof(client->name)); + + if (msp_reset(client) == -1) { + v4l_dbg(1, msp_debug, client, "msp3400 not found\n"); + return -ENODEV; + } + + state = kzalloc(sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &msp_ops); + + state->v4l2_std = V4L2_STD_NTSC; + state->detected_std = V4L2_STD_ALL; + state->audmode = V4L2_TUNER_MODE_STEREO; + state->input = -1; + state->i2s_mode = 0; + init_waitqueue_head(&state->wq); + /* These are the reset input/output positions */ + state->route_in = MSP_INPUT_DEFAULT; + state->route_out = MSP_OUTPUT_DEFAULT; + + state->rev1 = msp_read_dsp(client, 0x1e); + if (state->rev1 != -1) + state->rev2 = msp_read_dsp(client, 0x1f); + v4l_dbg(1, msp_debug, client, "rev1=0x%04x, rev2=0x%04x\n", + state->rev1, state->rev2); + if (state->rev1 == -1 || (state->rev1 == 0 && state->rev2 == 0)) { + v4l_dbg(1, msp_debug, client, + "not an msp3400 (cannot read chip version)\n"); + kfree(state); + return -ENODEV; + } + + msp_family = ((state->rev1 >> 4) & 0x0f) + 3; + msp_product = (state->rev2 >> 8) & 0xff; + msp_prod_hi = msp_product / 10; + msp_prod_lo = msp_product % 10; + msp_revision = (state->rev1 & 0x0f) + '@'; + msp_hard = ((state->rev1 >> 8) & 0xff) + '@'; + msp_rom = state->rev2 & 0x1f; + /* Rev B=2, C=3, D=4, G=7 */ + state->ident = msp_family * 10000 + 4000 + msp_product * 10 + + msp_revision - '@'; + + /* Has NICAM support: all mspx41x and mspx45x products have NICAM */ + state->has_nicam = + msp_prod_hi == 1 || msp_prod_hi == 5; + /* Has radio support: was added with revision G */ + state->has_radio = + msp_revision >= 'G'; + /* Has headphones output: not for stripped down products */ + state->has_headphones = + msp_prod_lo < 5; + /* Has scart2 input: not in stripped down products of the '3' family */ + state->has_scart2 = + msp_family >= 4 || msp_prod_lo < 7; + /* Has scart3 input: not in stripped down products of the '3' family */ + state->has_scart3 = + msp_family >= 4 || msp_prod_lo < 5; + /* Has scart4 input: not in pre D revisions, not in stripped D revs */ + state->has_scart4 = + msp_family >= 4 || (msp_revision >= 'D' && msp_prod_lo < 5); + /* Has scart2 output: not in stripped down products of + * the '3' family */ + state->has_scart2_out = + msp_family >= 4 || msp_prod_lo < 5; + /* Has scart2 a volume control? Not in pre-D revisions. */ + state->has_scart2_out_volume = + msp_revision > 'C' && state->has_scart2_out; + /* Has a configurable i2s out? */ + state->has_i2s_conf = + msp_revision >= 'G' && msp_prod_lo < 7; + /* Has subwoofer output: not in pre-D revs and not in stripped down + * products */ + state->has_subwoofer = + msp_revision >= 'D' && msp_prod_lo < 5; + /* Has soundprocessing (bass/treble/balance/loudness/equalizer): + * not in stripped down products */ + state->has_sound_processing = + msp_prod_lo < 7; + /* Has Virtual Dolby Surround: only in msp34x1 */ + state->has_virtual_dolby_surround = + msp_revision == 'G' && msp_prod_lo == 1; + /* Has Virtual Dolby Surround & Dolby Pro Logic: only in msp34x2 */ + state->has_dolby_pro_logic = + msp_revision == 'G' && msp_prod_lo == 2; + /* The msp343xG supports BTSC only and cannot do Automatic Standard + * Detection. */ + state->force_btsc = + msp_family == 3 && msp_revision == 'G' && msp_prod_hi == 3; + + state->opmode = opmode; + if (state->opmode == OPMODE_AUTO) { + /* MSP revision G and up have both autodetect and autoselect */ + if (msp_revision >= 'G') + state->opmode = OPMODE_AUTOSELECT; + /* MSP revision D and up have autodetect */ + else if (msp_revision >= 'D') + state->opmode = OPMODE_AUTODETECT; + else + state->opmode = OPMODE_MANUAL; + } + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 6); + if (state->has_sound_processing) { + v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_BASS, 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 0); + } + state->volume = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 58880); + v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768); + state->muted = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(state); + return err; + } + + v4l2_ctrl_cluster(2, &state->volume); + v4l2_ctrl_handler_setup(hdl); + + /* hello world :-) */ + v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n", + msp_family, msp_product, + msp_revision, msp_hard, msp_rom, + client->addr << 1, client->adapter->name); + v4l_info(client, "%s ", client->name); + if (state->has_nicam && state->has_radio) + printk(KERN_CONT "supports nicam and radio, "); + else if (state->has_nicam) + printk(KERN_CONT "supports nicam, "); + else if (state->has_radio) + printk(KERN_CONT "supports radio, "); + printk(KERN_CONT "mode is "); + + /* version-specific initialization */ + switch (state->opmode) { + case OPMODE_MANUAL: + printk(KERN_CONT "manual"); + thread_func = msp3400c_thread; + break; + case OPMODE_AUTODETECT: + printk(KERN_CONT "autodetect"); + thread_func = msp3410d_thread; + break; + case OPMODE_AUTOSELECT: + printk(KERN_CONT "autodetect and autoselect"); + thread_func = msp34xxg_thread; + break; + } + printk(KERN_CONT "\n"); + + /* startup control thread if needed */ + if (thread_func) { + state->kthread = kthread_run(thread_func, client, "msp34xx"); + + if (IS_ERR(state->kthread)) + v4l_warn(client, "kernel_thread() failed\n"); + msp_wake_thread(client); + } + return 0; +} + +static int msp_remove(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + v4l2_device_unregister_subdev(&state->sd); + /* shutdown control thread */ + if (state->kthread) { + state->restart = 1; + kthread_stop(state->kthread); + } + msp_reset(client); + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct dev_pm_ops msp3400_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(msp_suspend, msp_resume) +}; + +static const struct i2c_device_id msp_id[] = { + { "msp3400", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, msp_id); + +static struct i2c_driver msp_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "msp3400", + .pm = &msp3400_pm_ops, + }, + .probe = msp_probe, + .remove = msp_remove, + .id_table = msp_id, +}; + +module_i2c_driver(msp_driver); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/i2c/msp3400-driver.h b/drivers/media/i2c/msp3400-driver.h new file mode 100644 index 00000000..fbe5e071 --- /dev/null +++ b/drivers/media/i2c/msp3400-driver.h @@ -0,0 +1,137 @@ +/* + */ + +#ifndef MSP3400_DRIVER_H +#define MSP3400_DRIVER_H + +#include +#include +#include + +/* ---------------------------------------------------------------------- */ + +/* This macro is allowed for *constants* only, gcc must calculate it + at compile time. Remember -- no floats in kernel mode */ +#define MSP_CARRIER(freq) ((int)((float)(freq / 18.432) * (1 << 24))) + +#define MSP_MODE_AM_DETECT 0 +#define MSP_MODE_FM_RADIO 2 +#define MSP_MODE_FM_TERRA 3 +#define MSP_MODE_FM_SAT 4 +#define MSP_MODE_FM_NICAM1 5 +#define MSP_MODE_FM_NICAM2 6 +#define MSP_MODE_AM_NICAM 7 +#define MSP_MODE_BTSC 8 +#define MSP_MODE_EXTERN 9 + +#define SCART_IN1 0 +#define SCART_IN2 1 +#define SCART_IN3 2 +#define SCART_IN4 3 +#define SCART_IN1_DA 4 +#define SCART_IN2_DA 5 +#define SCART_MONO 6 +#define SCART_MUTE 7 + +#define SCART_DSP_IN 0 +#define SCART1_OUT 1 +#define SCART2_OUT 2 + +#define OPMODE_AUTO -1 +#define OPMODE_MANUAL 0 +#define OPMODE_AUTODETECT 1 /* use autodetect (>= msp3410 only) */ +#define OPMODE_AUTOSELECT 2 /* use autodetect & autoselect (>= msp34xxG) */ + +/* module parameters */ +extern int msp_debug; +extern bool msp_once; +extern bool msp_amsound; +extern int msp_standard; +extern bool msp_dolby; +extern int msp_stereo_thresh; + +struct msp_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + int rev1, rev2; + int ident; + u8 has_nicam; + u8 has_radio; + u8 has_headphones; + u8 has_ntsc_jp_d_k3; + u8 has_scart2; + u8 has_scart3; + u8 has_scart4; + u8 has_scart2_out; + u8 has_scart2_out_volume; + u8 has_i2s_conf; + u8 has_subwoofer; + u8 has_sound_processing; + u8 has_virtual_dolby_surround; + u8 has_dolby_pro_logic; + u8 force_btsc; + + int radio; + int opmode; + int std; + int mode; + v4l2_std_id v4l2_std, detected_std; + int nicam_on; + int acb; + int in_scart; + int i2s_mode; + int main, second; /* sound carrier */ + int input; + u32 route_in; + u32 route_out; + + /* v4l2 */ + int audmode; + int rxsubchans; + + struct { + /* volume cluster */ + struct v4l2_ctrl *volume; + struct v4l2_ctrl *muted; + }; + + int scan_in_progress; + + /* thread */ + struct task_struct *kthread; + wait_queue_head_t wq; + unsigned int restart:1; + unsigned int watch_stereo:1; +}; + +static inline struct msp_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct msp_state, sd); +} + +static inline struct msp_state *ctrl_to_state(struct v4l2_ctrl *ctrl) +{ + return container_of(ctrl->handler, struct msp_state, hdl); +} + +/* msp3400-driver.c */ +int msp_write_dem(struct i2c_client *client, int addr, int val); +int msp_write_dsp(struct i2c_client *client, int addr, int val); +int msp_read_dem(struct i2c_client *client, int addr); +int msp_read_dsp(struct i2c_client *client, int addr); +int msp_reset(struct i2c_client *client); +void msp_set_scart(struct i2c_client *client, int in, int out); +void msp_update_volume(struct msp_state *state); +int msp_sleep(struct msp_state *state, int timeout); + +/* msp3400-kthreads.c */ +const char *msp_standard_std_name(int std); +void msp_set_audmode(struct i2c_client *client); +int msp_detect_stereo(struct i2c_client *client); +int msp3400c_thread(void *data); +int msp3410d_thread(void *data); +int msp34xxg_thread(void *data); +void msp3400c_set_mode(struct i2c_client *client, int mode); +void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2); + +#endif /* MSP3400_DRIVER_H */ diff --git a/drivers/media/i2c/msp3400-kthreads.c b/drivers/media/i2c/msp3400-kthreads.c new file mode 100644 index 00000000..f8b51714 --- /dev/null +++ b/drivers/media/i2c/msp3400-kthreads.c @@ -0,0 +1,1165 @@ +/* + * Programming the mspx4xx sound processor family + * + * (c) 1997-2001 Gerd Knorr + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "msp3400-driver.h" + +/* this one uses the automatic sound standard detection of newer msp34xx + chip versions */ +static struct { + int retval; + int main, second; + char *name; + v4l2_std_id std; +} msp_stdlist[] = { + { 0x0000, 0, 0, "could not detect sound standard", V4L2_STD_ALL }, + { 0x0001, 0, 0, "autodetect start", V4L2_STD_ALL }, + { 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72), + "4.5/4.72 M Dual FM-Stereo", V4L2_STD_MN }, + { 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875), + "5.5/5.74 B/G Dual FM-Stereo", V4L2_STD_BG }, + { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), + "6.5/6.25 D/K1 Dual FM-Stereo", V4L2_STD_DK }, + { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), + "6.5/6.74 D/K2 Dual FM-Stereo", V4L2_STD_DK }, + { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), + "6.5 D/K FM-Mono (HDEV3)", V4L2_STD_DK }, + { 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875), + "6.5/5.74 D/K3 Dual FM-Stereo", V4L2_STD_DK }, + { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), + "5.5/5.85 B/G NICAM FM", V4L2_STD_BG }, + { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), + "6.5/5.85 L NICAM AM", V4L2_STD_L }, + { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), + "6.0/6.55 I NICAM FM", V4L2_STD_PAL_I }, + { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), + "6.5/5.85 D/K NICAM FM", V4L2_STD_DK }, + { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), + "6.5/5.85 D/K NICAM FM (HDEV2)", V4L2_STD_DK }, + { 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85), + "6.5/5.85 D/K NICAM FM (HDEV3)", V4L2_STD_DK }, + { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), + "4.5 M BTSC-Stereo", V4L2_STD_MTS }, + { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), + "4.5 M BTSC-Mono + SAP", V4L2_STD_MTS }, + { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), + "4.5 M EIA-J Japan Stereo", V4L2_STD_NTSC_M_JP }, + { 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7), + "10.7 FM-Stereo Radio", V4L2_STD_ALL }, + { 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5), + "6.5 SAT-Mono", V4L2_STD_ALL }, + { 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20), + "7.02/7.20 SAT-Stereo", V4L2_STD_ALL }, + { 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2), + "7.2 SAT ADR", V4L2_STD_ALL }, + { -1, 0, 0, NULL, 0 }, /* EOF */ +}; + +static struct msp3400c_init_data_dem { + int fir1[6]; + int fir2[6]; + int cdo1; + int cdo2; + int ad_cv; + int mode_reg; + int dsp_src; + int dsp_matrix; +} msp3400c_init_data[] = { + { /* AM (for carrier detect / msp3400) */ + {75, 19, 36, 35, 39, 40}, + {75, 19, 36, 35, 39, 40}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0500, 0x0020, 0x3000 + }, { /* AM (for carrier detect / msp3410) */ + {-1, -1, -8, 2, 59, 126}, + {-1, -1, -8, 2, 59, 126}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0100, 0x0020, 0x3000 + }, { /* FM Radio */ + {-8, -8, 4, 6, 78, 107}, + {-8, -8, 4, 6, 78, 107}, + MSP_CARRIER(10.7), MSP_CARRIER(10.7), + 0x00d0, 0x0480, 0x0020, 0x3000 + }, { /* Terrestrial FM-mono + FM-stereo */ + {3, 18, 27, 48, 66, 72}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0480, 0x0030, 0x3000 + }, { /* Sat FM-mono */ + { 1, 9, 14, 24, 33, 37}, + { 3, 18, 27, 48, 66, 72}, + MSP_CARRIER(6.5), MSP_CARRIER(6.5), + 0x00c6, 0x0480, 0x0000, 0x3000 + }, { /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */ + {-2, -8, -10, 10, 50, 86}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0040, 0x0120, 0x3000 + }, { /* NICAM/FM -- I (6.0/6.552) */ + {2, 4, -6, -4, 40, 94}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(6.0), MSP_CARRIER(6.0), + 0x00d0, 0x0040, 0x0120, 0x3000 + }, { /* NICAM/AM -- L (6.5/5.85) */ + {-2, -8, -10, 10, 50, 86}, + {-4, -12, -9, 23, 79, 126}, + MSP_CARRIER(6.5), MSP_CARRIER(6.5), + 0x00c6, 0x0140, 0x0120, 0x7c00 + }, +}; + +struct msp3400c_carrier_detect { + int cdo; + char *name; +}; + +static struct msp3400c_carrier_detect msp3400c_carrier_detect_main[] = { + /* main carrier */ + { MSP_CARRIER(4.5), "4.5 NTSC" }, + { MSP_CARRIER(5.5), "5.5 PAL B/G" }, + { MSP_CARRIER(6.0), "6.0 PAL I" }, + { MSP_CARRIER(6.5), "6.5 PAL D/K + SAT + SECAM" } +}; + +static struct msp3400c_carrier_detect msp3400c_carrier_detect_55[] = { + /* PAL B/G */ + { MSP_CARRIER(5.7421875), "5.742 PAL B/G FM-stereo" }, + { MSP_CARRIER(5.85), "5.85 PAL B/G NICAM" } +}; + +static struct msp3400c_carrier_detect msp3400c_carrier_detect_65[] = { + /* PAL SAT / SECAM */ + { MSP_CARRIER(5.85), "5.85 PAL D/K + SECAM NICAM" }, + { MSP_CARRIER(6.2578125), "6.25 PAL D/K1 FM-stereo" }, + { MSP_CARRIER(6.7421875), "6.74 PAL D/K2 FM-stereo" }, + { MSP_CARRIER(7.02), "7.02 PAL SAT FM-stereo s/b" }, + { MSP_CARRIER(7.20), "7.20 PAL SAT FM-stereo s" }, + { MSP_CARRIER(7.38), "7.38 PAL SAT FM-stereo b" }, +}; + +/* ------------------------------------------------------------------------ */ + +const char *msp_standard_std_name(int std) +{ + int i; + + for (i = 0; msp_stdlist[i].name != NULL; i++) + if (msp_stdlist[i].retval == std) + return msp_stdlist[i].name; + return "unknown"; +} + +static v4l2_std_id msp_standard_std(int std) +{ + int i; + + for (i = 0; msp_stdlist[i].name != NULL; i++) + if (msp_stdlist[i].retval == std) + return msp_stdlist[i].std; + return V4L2_STD_ALL; +} + +static void msp_set_source(struct i2c_client *client, u16 src) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (msp_dolby) { + msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */ + msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */ + } else { + msp_write_dsp(client, 0x0008, src); + msp_write_dsp(client, 0x0009, src); + } + msp_write_dsp(client, 0x000a, src); + msp_write_dsp(client, 0x000b, src); + msp_write_dsp(client, 0x000c, src); + if (state->has_scart2_out) + msp_write_dsp(client, 0x0041, src); +} + +void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2) +{ + msp_write_dem(client, 0x0093, cdo1 & 0xfff); + msp_write_dem(client, 0x009b, cdo1 >> 12); + msp_write_dem(client, 0x00a3, cdo2 & 0xfff); + msp_write_dem(client, 0x00ab, cdo2 >> 12); + msp_write_dem(client, 0x0056, 0); /* LOAD_REG_1/2 */ +} + +void msp3400c_set_mode(struct i2c_client *client, int mode) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode]; + int tuner = (state->route_in >> 3) & 1; + int i; + + v4l_dbg(1, msp_debug, client, "set_mode: %d\n", mode); + state->mode = mode; + state->rxsubchans = V4L2_TUNER_SUB_MONO; + + msp_write_dem(client, 0x00bb, data->ad_cv | (tuner ? 0x100 : 0)); + + for (i = 5; i >= 0; i--) /* fir 1 */ + msp_write_dem(client, 0x0001, data->fir1[i]); + + msp_write_dem(client, 0x0005, 0x0004); /* fir 2 */ + msp_write_dem(client, 0x0005, 0x0040); + msp_write_dem(client, 0x0005, 0x0000); + for (i = 5; i >= 0; i--) + msp_write_dem(client, 0x0005, data->fir2[i]); + + msp_write_dem(client, 0x0083, data->mode_reg); + + msp3400c_set_carrier(client, data->cdo1, data->cdo2); + + msp_set_source(client, data->dsp_src); + /* set prescales */ + + /* volume prescale for SCART (AM mono input) */ + msp_write_dsp(client, 0x000d, 0x1900); + msp_write_dsp(client, 0x000e, data->dsp_matrix); + if (state->has_nicam) /* nicam prescale */ + msp_write_dsp(client, 0x0010, 0x5a00); +} + +/* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP, + nor do they support stereo BTSC. */ +static void msp3400c_set_audmode(struct i2c_client *client) +{ + static char *strmode[] = { + "mono", "stereo", "lang2", "lang1", "lang1+lang2" + }; + struct msp_state *state = to_state(i2c_get_clientdata(client)); + char *modestr = (state->audmode >= 0 && state->audmode < 5) ? + strmode[state->audmode] : "unknown"; + int src = 0; /* channel source: FM/AM, nicam or SCART */ + int audmode = state->audmode; + + if (state->opmode == OPMODE_AUTOSELECT) { + /* this method would break everything, let's make sure + * it's never called + */ + v4l_dbg(1, msp_debug, client, + "set_audmode called with mode=%d instead of set_source (ignored)\n", + state->audmode); + return; + } + + /* Note: for the C and D revs no NTSC stereo + SAP is possible as + the hardware does not support SAP. So the rxsubchans combination + of STEREO | LANG2 does not occur. */ + + if (state->mode != MSP_MODE_EXTERN) { + /* switch to mono if only mono is available */ + if (state->rxsubchans == V4L2_TUNER_SUB_MONO) + audmode = V4L2_TUNER_MODE_MONO; + /* if bilingual */ + else if (state->rxsubchans & V4L2_TUNER_SUB_LANG2) { + /* and mono or stereo, then fallback to lang1 */ + if (audmode == V4L2_TUNER_MODE_MONO || + audmode == V4L2_TUNER_MODE_STEREO) + audmode = V4L2_TUNER_MODE_LANG1; + } + /* if stereo, and audmode is not mono, then switch to stereo */ + else if (audmode != V4L2_TUNER_MODE_MONO) + audmode = V4L2_TUNER_MODE_STEREO; + } + + /* switch demodulator */ + switch (state->mode) { + case MSP_MODE_FM_TERRA: + v4l_dbg(1, msp_debug, client, "FM set_audmode: %s\n", modestr); + switch (audmode) { + case V4L2_TUNER_MODE_STEREO: + msp_write_dsp(client, 0x000e, 0x3001); + break; + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + case V4L2_TUNER_MODE_LANG2: + case V4L2_TUNER_MODE_LANG1_LANG2: + msp_write_dsp(client, 0x000e, 0x3000); + break; + } + break; + case MSP_MODE_FM_SAT: + v4l_dbg(1, msp_debug, client, "SAT set_audmode: %s\n", modestr); + switch (audmode) { + case V4L2_TUNER_MODE_MONO: + msp3400c_set_carrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5)); + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + msp3400c_set_carrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02)); + break; + case V4L2_TUNER_MODE_LANG1: + msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02)); + break; + case V4L2_TUNER_MODE_LANG2: + msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02)); + break; + } + break; + case MSP_MODE_FM_NICAM1: + case MSP_MODE_FM_NICAM2: + case MSP_MODE_AM_NICAM: + v4l_dbg(1, msp_debug, client, + "NICAM set_audmode: %s\n", modestr); + if (state->nicam_on) + src = 0x0100; /* NICAM */ + break; + case MSP_MODE_BTSC: + v4l_dbg(1, msp_debug, client, + "BTSC set_audmode: %s\n", modestr); + break; + case MSP_MODE_EXTERN: + v4l_dbg(1, msp_debug, client, + "extern set_audmode: %s\n", modestr); + src = 0x0200; /* SCART */ + break; + case MSP_MODE_FM_RADIO: + v4l_dbg(1, msp_debug, client, + "FM-Radio set_audmode: %s\n", modestr); + break; + default: + v4l_dbg(1, msp_debug, client, "mono set_audmode\n"); + return; + } + + /* switch audio */ + v4l_dbg(1, msp_debug, client, "set audmode %d\n", audmode); + switch (audmode) { + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + src |= 0x0020; + break; + case V4L2_TUNER_MODE_MONO: + if (state->mode == MSP_MODE_AM_NICAM) { + v4l_dbg(1, msp_debug, client, "switching to AM mono\n"); + /* AM mono decoding is handled by tuner, not MSP chip */ + /* SCART switching control register */ + msp_set_scart(client, SCART_MONO, 0); + src = 0x0200; + break; + } + if (state->rxsubchans & V4L2_TUNER_SUB_STEREO) + src = 0x0030; + break; + case V4L2_TUNER_MODE_LANG1: + break; + case V4L2_TUNER_MODE_LANG2: + src |= 0x0010; + break; + } + v4l_dbg(1, msp_debug, client, + "set_audmode final source/matrix = 0x%x\n", src); + + msp_set_source(client, src); +} + +static void msp3400c_print_mode(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (state->main == state->second) + v4l_dbg(1, msp_debug, client, + "mono sound carrier: %d.%03d MHz\n", + state->main / 910000, (state->main / 910) % 1000); + else + v4l_dbg(1, msp_debug, client, + "main sound carrier: %d.%03d MHz\n", + state->main / 910000, (state->main / 910) % 1000); + if (state->mode == MSP_MODE_FM_NICAM1 || state->mode == MSP_MODE_FM_NICAM2) + v4l_dbg(1, msp_debug, client, + "NICAM/FM carrier : %d.%03d MHz\n", + state->second / 910000, (state->second/910) % 1000); + if (state->mode == MSP_MODE_AM_NICAM) + v4l_dbg(1, msp_debug, client, + "NICAM/AM carrier : %d.%03d MHz\n", + state->second / 910000, (state->second / 910) % 1000); + if (state->mode == MSP_MODE_FM_TERRA && state->main != state->second) { + v4l_dbg(1, msp_debug, client, + "FM-stereo carrier : %d.%03d MHz\n", + state->second / 910000, (state->second / 910) % 1000); + } +} + +/* ----------------------------------------------------------------------- */ + +static int msp3400c_detect_stereo(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int val; + int rxsubchans = state->rxsubchans; + int newnicam = state->nicam_on; + int update = 0; + + switch (state->mode) { + case MSP_MODE_FM_TERRA: + val = msp_read_dsp(client, 0x18); + if (val > 32767) + val -= 65536; + v4l_dbg(2, msp_debug, client, + "stereo detect register: %d\n", val); + if (val > 8192) { + rxsubchans = V4L2_TUNER_SUB_STEREO; + } else if (val < -4096) { + rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + } else { + rxsubchans = V4L2_TUNER_SUB_MONO; + } + newnicam = 0; + break; + case MSP_MODE_FM_NICAM1: + case MSP_MODE_FM_NICAM2: + case MSP_MODE_AM_NICAM: + val = msp_read_dem(client, 0x23); + v4l_dbg(2, msp_debug, client, "nicam sync=%d, mode=%d\n", + val & 1, (val & 0x1e) >> 1); + + if (val & 1) { + /* nicam synced */ + switch ((val & 0x1e) >> 1) { + case 0: + case 8: + rxsubchans = V4L2_TUNER_SUB_STEREO; + break; + case 1: + case 9: + rxsubchans = V4L2_TUNER_SUB_MONO; + break; + case 2: + case 10: + rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + break; + default: + rxsubchans = V4L2_TUNER_SUB_MONO; + break; + } + newnicam = 1; + } else { + newnicam = 0; + rxsubchans = V4L2_TUNER_SUB_MONO; + } + break; + } + if (rxsubchans != state->rxsubchans) { + update = 1; + v4l_dbg(1, msp_debug, client, + "watch: rxsubchans %02x => %02x\n", + state->rxsubchans, rxsubchans); + state->rxsubchans = rxsubchans; + } + if (newnicam != state->nicam_on) { + update = 1; + v4l_dbg(1, msp_debug, client, "watch: nicam %d => %d\n", + state->nicam_on, newnicam); + state->nicam_on = newnicam; + } + return update; +} + +/* + * A kernel thread for msp3400 control -- we don't want to block the + * in the ioctl while doing the sound carrier & stereo detect + */ +/* stereo/multilang monitoring */ +static void watch_stereo(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (msp_detect_stereo(client)) + msp_set_audmode(client); + + if (msp_once) + state->watch_stereo = 0; +} + +int msp3400c_thread(void *data) +{ + struct i2c_client *client = data; + struct msp_state *state = to_state(i2c_get_clientdata(client)); + struct msp3400c_carrier_detect *cd; + int count, max1, max2, val1, val2, val, i; + + v4l_dbg(1, msp_debug, client, "msp3400 daemon started\n"); + state->detected_std = V4L2_STD_ALL; + set_freezable(); + for (;;) { + v4l_dbg(2, msp_debug, client, "msp3400 thread: sleep\n"); + msp_sleep(state, -1); + v4l_dbg(2, msp_debug, client, "msp3400 thread: wakeup\n"); + +restart: + v4l_dbg(2, msp_debug, client, "thread: restart scan\n"); + state->restart = 0; + if (kthread_should_stop()) + break; + + if (state->radio || MSP_MODE_EXTERN == state->mode) { + /* no carrier scan, just unmute */ + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); + state->scan_in_progress = 0; + msp_update_volume(state); + continue; + } + + /* mute audio */ + state->scan_in_progress = 1; + msp_update_volume(state); + + msp3400c_set_mode(client, MSP_MODE_AM_DETECT); + val1 = val2 = 0; + max1 = max2 = -1; + state->watch_stereo = 0; + state->nicam_on = 0; + + /* wait for tuner to settle down after a channel change */ + if (msp_sleep(state, 200)) + goto restart; + + /* carrier detect pass #1 -- main carrier */ + cd = msp3400c_carrier_detect_main; + count = ARRAY_SIZE(msp3400c_carrier_detect_main); + + if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) { + /* autodetect doesn't work well with AM ... */ + max1 = 3; + count = 0; + v4l_dbg(1, msp_debug, client, "AM sound override\n"); + } + + for (i = 0; i < count; i++) { + msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo); + if (msp_sleep(state, 100)) + goto restart; + val = msp_read_dsp(client, 0x1b); + if (val > 32767) + val -= 65536; + if (val1 < val) + val1 = val, max1 = i; + v4l_dbg(1, msp_debug, client, + "carrier1 val: %5d / %s\n", val, cd[i].name); + } + + /* carrier detect pass #2 -- second (stereo) carrier */ + switch (max1) { + case 1: /* 5.5 */ + cd = msp3400c_carrier_detect_55; + count = ARRAY_SIZE(msp3400c_carrier_detect_55); + break; + case 3: /* 6.5 */ + cd = msp3400c_carrier_detect_65; + count = ARRAY_SIZE(msp3400c_carrier_detect_65); + break; + case 0: /* 4.5 */ + case 2: /* 6.0 */ + default: + cd = NULL; + count = 0; + break; + } + + if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) { + /* autodetect doesn't work well with AM ... */ + cd = NULL; + count = 0; + max2 = 0; + } + for (i = 0; i < count; i++) { + msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo); + if (msp_sleep(state, 100)) + goto restart; + val = msp_read_dsp(client, 0x1b); + if (val > 32767) + val -= 65536; + if (val2 < val) + val2 = val, max2 = i; + v4l_dbg(1, msp_debug, client, + "carrier2 val: %5d / %s\n", val, cd[i].name); + } + + /* program the msp3400 according to the results */ + state->main = msp3400c_carrier_detect_main[max1].cdo; + switch (max1) { + case 1: /* 5.5 */ + state->detected_std = V4L2_STD_BG | V4L2_STD_PAL_H; + if (max2 == 0) { + /* B/G FM-stereo */ + state->second = msp3400c_carrier_detect_55[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); + state->watch_stereo = 1; + } else if (max2 == 1 && state->has_nicam) { + /* B/G NICAM */ + state->second = msp3400c_carrier_detect_55[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_NICAM1); + state->nicam_on = 1; + state->watch_stereo = 1; + } else { + goto no_second; + } + break; + case 2: /* 6.0 */ + /* PAL I NICAM */ + state->detected_std = V4L2_STD_PAL_I; + state->second = MSP_CARRIER(6.552); + msp3400c_set_mode(client, MSP_MODE_FM_NICAM2); + state->nicam_on = 1; + state->watch_stereo = 1; + break; + case 3: /* 6.5 */ + if (max2 == 1 || max2 == 2) { + /* D/K FM-stereo */ + state->second = msp3400c_carrier_detect_65[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); + state->watch_stereo = 1; + state->detected_std = V4L2_STD_DK; + } else if (max2 == 0 && (state->v4l2_std & V4L2_STD_SECAM)) { + /* L NICAM or AM-mono */ + state->second = msp3400c_carrier_detect_65[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_AM_NICAM); + state->watch_stereo = 1; + state->detected_std = V4L2_STD_L; + } else if (max2 == 0 && state->has_nicam) { + /* D/K NICAM */ + state->second = msp3400c_carrier_detect_65[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_NICAM1); + state->nicam_on = 1; + state->watch_stereo = 1; + state->detected_std = V4L2_STD_DK; + } else { + goto no_second; + } + break; + case 0: /* 4.5 */ + state->detected_std = V4L2_STD_MN; + default: +no_second: + state->second = msp3400c_carrier_detect_main[max1].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); + break; + } + msp3400c_set_carrier(client, state->second, state->main); + + /* unmute */ + state->scan_in_progress = 0; + msp3400c_set_audmode(client); + msp_update_volume(state); + + if (msp_debug) + msp3400c_print_mode(client); + + /* monitor tv audio mode, the first time don't wait + so long to get a quick stereo/bilingual result */ + count = 3; + while (state->watch_stereo) { + if (msp_sleep(state, count ? 1000 : 5000)) + goto restart; + if (count) + count--; + watch_stereo(client); + } + } + v4l_dbg(1, msp_debug, client, "thread: exit\n"); + return 0; +} + + +int msp3410d_thread(void *data) +{ + struct i2c_client *client = data; + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int val, i, std, count; + + v4l_dbg(1, msp_debug, client, "msp3410 daemon started\n"); + state->detected_std = V4L2_STD_ALL; + set_freezable(); + for (;;) { + v4l_dbg(2, msp_debug, client, "msp3410 thread: sleep\n"); + msp_sleep(state, -1); + v4l_dbg(2, msp_debug, client, "msp3410 thread: wakeup\n"); + +restart: + v4l_dbg(2, msp_debug, client, "thread: restart scan\n"); + state->restart = 0; + if (kthread_should_stop()) + break; + + if (state->mode == MSP_MODE_EXTERN) { + /* no carrier scan needed, just unmute */ + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); + state->scan_in_progress = 0; + msp_update_volume(state); + continue; + } + + /* mute audio */ + state->scan_in_progress = 1; + msp_update_volume(state); + + /* start autodetect. Note: autodetect is not supported for + NTSC-M and radio, hence we force the standard in those + cases. */ + if (state->radio) + std = 0x40; + else + std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1; + state->watch_stereo = 0; + state->nicam_on = 0; + + /* wait for tuner to settle down after a channel change */ + if (msp_sleep(state, 200)) + goto restart; + + if (msp_debug) + v4l_dbg(2, msp_debug, client, + "setting standard: %s (0x%04x)\n", + msp_standard_std_name(std), std); + + if (std != 1) { + /* programmed some specific mode */ + val = std; + } else { + /* triggered autodetect */ + msp_write_dem(client, 0x20, std); + for (;;) { + if (msp_sleep(state, 100)) + goto restart; + + /* check results */ + val = msp_read_dem(client, 0x7e); + if (val < 0x07ff) + break; + v4l_dbg(2, msp_debug, client, + "detection still in progress\n"); + } + } + for (i = 0; msp_stdlist[i].name != NULL; i++) + if (msp_stdlist[i].retval == val) + break; + v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n", + msp_standard_std_name(val), val); + state->main = msp_stdlist[i].main; + state->second = msp_stdlist[i].second; + state->std = val; + state->rxsubchans = V4L2_TUNER_SUB_MONO; + + if (msp_amsound && !state->radio && + (state->v4l2_std & V4L2_STD_SECAM) && (val != 0x0009)) { + /* autodetection has failed, let backup */ + v4l_dbg(1, msp_debug, client, "autodetection failed," + " switching to backup standard: %s (0x%04x)\n", + msp_stdlist[8].name ? + msp_stdlist[8].name : "unknown", val); + state->std = val = 0x0009; + msp_write_dem(client, 0x20, val); + } else { + state->detected_std = msp_standard_std(state->std); + } + + /* set stereo */ + switch (val) { + case 0x0008: /* B/G NICAM */ + case 0x000a: /* I NICAM */ + case 0x000b: /* D/K NICAM */ + if (val == 0x000a) + state->mode = MSP_MODE_FM_NICAM2; + else + state->mode = MSP_MODE_FM_NICAM1; + /* just turn on stereo */ + state->nicam_on = 1; + state->watch_stereo = 1; + break; + case 0x0009: + state->mode = MSP_MODE_AM_NICAM; + state->nicam_on = 1; + state->watch_stereo = 1; + break; + case 0x0020: /* BTSC */ + /* The pre-'G' models only have BTSC-mono */ + state->mode = MSP_MODE_BTSC; + break; + case 0x0040: /* FM radio */ + state->mode = MSP_MODE_FM_RADIO; + state->rxsubchans = V4L2_TUNER_SUB_STEREO; + /* not needed in theory if we have radio, but + short programming enables carrier mute */ + msp3400c_set_mode(client, MSP_MODE_FM_RADIO); + msp3400c_set_carrier(client, MSP_CARRIER(10.7), + MSP_CARRIER(10.7)); + break; + case 0x0002: + case 0x0003: + case 0x0004: + case 0x0005: + state->mode = MSP_MODE_FM_TERRA; + state->watch_stereo = 1; + break; + } + + /* set various prescales */ + msp_write_dsp(client, 0x0d, 0x1900); /* scart */ + msp_write_dsp(client, 0x0e, 0x3000); /* FM */ + if (state->has_nicam) + msp_write_dsp(client, 0x10, 0x5a00); /* nicam */ + + if (state->has_i2s_conf) + msp_write_dem(client, 0x40, state->i2s_mode); + + /* unmute */ + msp3400c_set_audmode(client); + state->scan_in_progress = 0; + msp_update_volume(state); + + /* monitor tv audio mode, the first time don't wait + so long to get a quick stereo/bilingual result */ + count = 3; + while (state->watch_stereo) { + if (msp_sleep(state, count ? 1000 : 5000)) + goto restart; + if (count) + count--; + watch_stereo(client); + } + } + v4l_dbg(1, msp_debug, client, "thread: exit\n"); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* msp34xxG + (autoselect no-thread) + * this one uses both automatic standard detection and automatic sound + * select which are available in the newer G versions + * struct msp: only norm, acb and source are really used in this mode + */ + +static int msp34xxg_modus(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (state->radio) { + v4l_dbg(1, msp_debug, client, "selected radio modus\n"); + return 0x0001; + } + if (state->v4l2_std == V4L2_STD_NTSC_M_JP) { + v4l_dbg(1, msp_debug, client, "selected M (EIA-J) modus\n"); + return 0x4001; + } + if (state->v4l2_std == V4L2_STD_NTSC_M_KR) { + v4l_dbg(1, msp_debug, client, "selected M (A2) modus\n"); + return 0x0001; + } + if (state->v4l2_std == V4L2_STD_SECAM_L) { + v4l_dbg(1, msp_debug, client, "selected SECAM-L modus\n"); + return 0x6001; + } + if (state->v4l2_std & V4L2_STD_MN) { + v4l_dbg(1, msp_debug, client, "selected M (BTSC) modus\n"); + return 0x2001; + } + return 0x7001; +} + +static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in) + { + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int source, matrix; + + switch (state->audmode) { + case V4L2_TUNER_MODE_MONO: + source = 0; /* mono only */ + matrix = 0x30; + break; + case V4L2_TUNER_MODE_LANG2: + source = 4; /* stereo or B */ + matrix = 0x10; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + source = 1; /* stereo or A|B */ + matrix = 0x20; + break; + case V4L2_TUNER_MODE_LANG1: + source = 3; /* stereo or A */ + matrix = 0x00; + break; + case V4L2_TUNER_MODE_STEREO: + default: + source = 3; /* stereo or A */ + matrix = 0x20; + break; + } + + if (in == MSP_DSP_IN_TUNER) + source = (source << 8) | 0x20; + /* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14 + instead of 11, 12, 13. So we add one for that msp version. */ + else if (in >= MSP_DSP_IN_MAIN_AVC && state->has_dolby_pro_logic) + source = ((in + 1) << 8) | matrix; + else + source = (in << 8) | matrix; + + v4l_dbg(1, msp_debug, client, + "set source to %d (0x%x) for output %02x\n", in, source, reg); + msp_write_dsp(client, reg, source); +} + +static void msp34xxg_set_sources(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + u32 in = state->route_in; + + msp34xxg_set_source(client, 0x0008, (in >> 4) & 0xf); + /* quasi-peak detector is set to same input as the loudspeaker (MAIN) */ + msp34xxg_set_source(client, 0x000c, (in >> 4) & 0xf); + msp34xxg_set_source(client, 0x0009, (in >> 8) & 0xf); + msp34xxg_set_source(client, 0x000a, (in >> 12) & 0xf); + if (state->has_scart2_out) + msp34xxg_set_source(client, 0x0041, (in >> 16) & 0xf); + msp34xxg_set_source(client, 0x000b, (in >> 20) & 0xf); +} + +/* (re-)initialize the msp34xxg */ +static void msp34xxg_reset(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int tuner = (state->route_in >> 3) & 1; + int modus; + + /* initialize std to 1 (autodetect) to signal that no standard is + selected yet. */ + state->std = 1; + + msp_reset(client); + + if (state->has_i2s_conf) + msp_write_dem(client, 0x40, state->i2s_mode); + + /* step-by-step initialisation, as described in the manual */ + modus = msp34xxg_modus(client); + modus |= tuner ? 0x100 : 0; + msp_write_dem(client, 0x30, modus); + + /* write the dsps that may have an influence on + standard/audio autodetection right now */ + msp34xxg_set_sources(client); + + msp_write_dsp(client, 0x0d, 0x1900); /* scart */ + msp_write_dsp(client, 0x0e, 0x3000); /* FM */ + if (state->has_nicam) + msp_write_dsp(client, 0x10, 0x5a00); /* nicam */ + + /* set identification threshold. Personally, I + * I set it to a higher value than the default + * of 0x190 to ignore noisy stereo signals. + * this needs tuning. (recommended range 0x00a0-0x03c0) + * 0x7f0 = forced mono mode + * + * a2 threshold for stereo/bilingual. + * Note: this register is part of the Manual/Compatibility mode. + * It is supported by all 'G'-family chips. + */ + msp_write_dem(client, 0x22, msp_stereo_thresh); +} + +int msp34xxg_thread(void *data) +{ + struct i2c_client *client = data; + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int val, i; + + v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n"); + state->detected_std = V4L2_STD_ALL; + set_freezable(); + for (;;) { + v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n"); + msp_sleep(state, -1); + v4l_dbg(2, msp_debug, client, "msp34xxg thread: wakeup\n"); + +restart: + v4l_dbg(1, msp_debug, client, "thread: restart scan\n"); + state->restart = 0; + if (kthread_should_stop()) + break; + + if (state->mode == MSP_MODE_EXTERN) { + /* no carrier scan needed, just unmute */ + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); + state->scan_in_progress = 0; + msp_update_volume(state); + continue; + } + + /* setup the chip*/ + msp34xxg_reset(client); + state->std = state->radio ? 0x40 : + (state->force_btsc && msp_standard == 1) ? 32 : msp_standard; + msp_write_dem(client, 0x20, state->std); + /* start autodetect */ + if (state->std != 1) + goto unmute; + + /* watch autodetect */ + v4l_dbg(1, msp_debug, client, + "started autodetect, waiting for result\n"); + for (i = 0; i < 10; i++) { + if (msp_sleep(state, 100)) + goto restart; + + /* check results */ + val = msp_read_dem(client, 0x7e); + if (val < 0x07ff) { + state->std = val; + break; + } + v4l_dbg(2, msp_debug, client, + "detection still in progress\n"); + } + if (state->std == 1) { + v4l_dbg(1, msp_debug, client, + "detection still in progress after 10 tries. giving up.\n"); + continue; + } + +unmute: + v4l_dbg(1, msp_debug, client, + "detected standard: %s (0x%04x)\n", + msp_standard_std_name(state->std), state->std); + state->detected_std = msp_standard_std(state->std); + + if (state->std == 9) { + /* AM NICAM mode */ + msp_write_dsp(client, 0x0e, 0x7c00); + } + + /* unmute: dispatch sound to scart output, set scart volume */ + msp_update_volume(state); + + /* restore ACB */ + if (msp_write_dsp(client, 0x13, state->acb)) + return -1; + + /* the periodic stereo/SAP check is only relevant for + the 0x20 standard (BTSC) */ + if (state->std != 0x20) + continue; + + state->watch_stereo = 1; + + /* monitor tv audio mode, the first time don't wait + in order to get a quick stereo/SAP update */ + watch_stereo(client); + while (state->watch_stereo) { + watch_stereo(client); + if (msp_sleep(state, 5000)) + goto restart; + } + } + v4l_dbg(1, msp_debug, client, "thread: exit\n"); + return 0; +} + +static int msp34xxg_detect_stereo(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int status = msp_read_dem(client, 0x0200); + int is_bilingual = status & 0x100; + int is_stereo = status & 0x40; + int oldrx = state->rxsubchans; + + if (state->mode == MSP_MODE_EXTERN) + return 0; + + state->rxsubchans = 0; + if (is_stereo) + state->rxsubchans = V4L2_TUNER_SUB_STEREO; + else + state->rxsubchans = V4L2_TUNER_SUB_MONO; + if (is_bilingual) { + if (state->std == 0x20) + state->rxsubchans |= V4L2_TUNER_SUB_SAP; + else + state->rxsubchans = + V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + } + v4l_dbg(1, msp_debug, client, + "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n", + status, is_stereo, is_bilingual, state->rxsubchans); + return (oldrx != state->rxsubchans); +} + +static void msp34xxg_set_audmode(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (state->std == 0x20) { + if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) && + (state->audmode == V4L2_TUNER_MODE_LANG1_LANG2 || + state->audmode == V4L2_TUNER_MODE_LANG2)) { + msp_write_dem(client, 0x20, 0x21); + } else { + msp_write_dem(client, 0x20, 0x20); + } + } + + msp34xxg_set_sources(client); +} + +void msp_set_audmode(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + switch (state->opmode) { + case OPMODE_MANUAL: + case OPMODE_AUTODETECT: + msp3400c_set_audmode(client); + break; + case OPMODE_AUTOSELECT: + msp34xxg_set_audmode(client); + break; + } +} + +int msp_detect_stereo(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + switch (state->opmode) { + case OPMODE_MANUAL: + case OPMODE_AUTODETECT: + return msp3400c_detect_stereo(client); + case OPMODE_AUTOSELECT: + return msp34xxg_detect_stereo(client); + } + return 0; +} + diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c new file mode 100644 index 00000000..8edb3d8f --- /dev/null +++ b/drivers/media/i2c/mt9m032.c @@ -0,0 +1,900 @@ +/* + * Driver for MT9M032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund + * Author: Martin Hostettler + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "aptina-pll.h" + +/* + * width and height include active boundary and black parts + * + * column 0- 15 active boundary + * column 16-1455 image + * column 1456-1471 active boundary + * column 1472-1599 black + * + * row 0- 51 black + * row 53- 59 active boundary + * row 60-1139 image + * row 1140-1147 active boundary + * row 1148-1151 black + */ + +#define MT9M032_PIXEL_ARRAY_WIDTH 1600 +#define MT9M032_PIXEL_ARRAY_HEIGHT 1152 + +#define MT9M032_CHIP_VERSION 0x00 +#define MT9M032_CHIP_VERSION_VALUE 0x1402 +#define MT9M032_ROW_START 0x01 +#define MT9M032_ROW_START_MIN 0 +#define MT9M032_ROW_START_MAX 1152 +#define MT9M032_ROW_START_DEF 60 +#define MT9M032_COLUMN_START 0x02 +#define MT9M032_COLUMN_START_MIN 0 +#define MT9M032_COLUMN_START_MAX 1600 +#define MT9M032_COLUMN_START_DEF 16 +#define MT9M032_ROW_SIZE 0x03 +#define MT9M032_ROW_SIZE_MIN 32 +#define MT9M032_ROW_SIZE_MAX 1152 +#define MT9M032_ROW_SIZE_DEF 1080 +#define MT9M032_COLUMN_SIZE 0x04 +#define MT9M032_COLUMN_SIZE_MIN 32 +#define MT9M032_COLUMN_SIZE_MAX 1600 +#define MT9M032_COLUMN_SIZE_DEF 1440 +#define MT9M032_HBLANK 0x05 +#define MT9M032_VBLANK 0x06 +#define MT9M032_VBLANK_MAX 0x7ff +#define MT9M032_SHUTTER_WIDTH_HIGH 0x08 +#define MT9M032_SHUTTER_WIDTH_LOW 0x09 +#define MT9M032_SHUTTER_WIDTH_MIN 1 +#define MT9M032_SHUTTER_WIDTH_MAX 1048575 +#define MT9M032_SHUTTER_WIDTH_DEF 1943 +#define MT9M032_PIX_CLK_CTRL 0x0a +#define MT9M032_PIX_CLK_CTRL_INV_PIXCLK 0x8000 +#define MT9M032_RESTART 0x0b +#define MT9M032_RESET 0x0d +#define MT9M032_PLL_CONFIG1 0x11 +#define MT9M032_PLL_CONFIG1_PREDIV_MASK 0x3f +#define MT9M032_PLL_CONFIG1_MUL_SHIFT 8 +#define MT9M032_READ_MODE1 0x1e +#define MT9M032_READ_MODE1_OUTPUT_BAD_FRAMES (1 << 13) +#define MT9M032_READ_MODE1_MAINTAIN_FRAME_RATE (1 << 12) +#define MT9M032_READ_MODE1_XOR_LINE_VALID (1 << 11) +#define MT9M032_READ_MODE1_CONT_LINE_VALID (1 << 10) +#define MT9M032_READ_MODE1_INVERT_TRIGGER (1 << 9) +#define MT9M032_READ_MODE1_SNAPSHOT (1 << 8) +#define MT9M032_READ_MODE1_GLOBAL_RESET (1 << 7) +#define MT9M032_READ_MODE1_BULB_EXPOSURE (1 << 6) +#define MT9M032_READ_MODE1_INVERT_STROBE (1 << 5) +#define MT9M032_READ_MODE1_STROBE_ENABLE (1 << 4) +#define MT9M032_READ_MODE1_STROBE_START_TRIG1 (0 << 2) +#define MT9M032_READ_MODE1_STROBE_START_EXP (1 << 2) +#define MT9M032_READ_MODE1_STROBE_START_SHUTTER (2 << 2) +#define MT9M032_READ_MODE1_STROBE_START_TRIG2 (3 << 2) +#define MT9M032_READ_MODE1_STROBE_END_TRIG1 (0 << 0) +#define MT9M032_READ_MODE1_STROBE_END_EXP (1 << 0) +#define MT9M032_READ_MODE1_STROBE_END_SHUTTER (2 << 0) +#define MT9M032_READ_MODE1_STROBE_END_TRIG2 (3 << 0) +#define MT9M032_READ_MODE2 0x20 +#define MT9M032_READ_MODE2_VFLIP_SHIFT 15 +#define MT9M032_READ_MODE2_HFLIP_SHIFT 14 +#define MT9M032_READ_MODE2_ROW_BLC 0x40 +#define MT9M032_GAIN_GREEN1 0x2b +#define MT9M032_GAIN_BLUE 0x2c +#define MT9M032_GAIN_RED 0x2d +#define MT9M032_GAIN_GREEN2 0x2e + +/* write only */ +#define MT9M032_GAIN_ALL 0x35 +#define MT9M032_GAIN_DIGITAL_MASK 0x7f +#define MT9M032_GAIN_DIGITAL_SHIFT 8 +#define MT9M032_GAIN_AMUL_SHIFT 6 +#define MT9M032_GAIN_ANALOG_MASK 0x3f +#define MT9M032_FORMATTER1 0x9e +#define MT9M032_FORMATTER1_PLL_P1_6 (1 << 8) +#define MT9M032_FORMATTER1_PARALLEL (1 << 12) +#define MT9M032_FORMATTER2 0x9f +#define MT9M032_FORMATTER2_DOUT_EN 0x1000 +#define MT9M032_FORMATTER2_PIXCLK_EN 0x2000 + +/* + * The available MT9M032 datasheet is missing documentation for register 0x10 + * MT9P031 seems to be close enough, so use constants from that datasheet for + * now. + * But keep the name MT9P031 to remind us, that this isn't really confirmed + * for this sensor. + */ +#define MT9P031_PLL_CONTROL 0x10 +#define MT9P031_PLL_CONTROL_PWROFF 0x0050 +#define MT9P031_PLL_CONTROL_PWRON 0x0051 +#define MT9P031_PLL_CONTROL_USEPLL 0x0052 + +struct mt9m032 { + struct v4l2_subdev subdev; + struct media_pad pad; + struct mt9m032_platform_data *pdata; + + unsigned int pix_clock; + + struct v4l2_ctrl_handler ctrls; + struct { + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + }; + + struct mutex lock; /* Protects streaming, format, interval and crop */ + + bool streaming; + + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + struct v4l2_fract frame_interval; +}; + +#define to_mt9m032(sd) container_of(sd, struct mt9m032, subdev) +#define to_dev(sensor) \ + (&((struct i2c_client *)v4l2_get_subdevdata(&(sensor)->subdev))->dev) + +static int mt9m032_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int mt9m032_write(struct i2c_client *client, u8 reg, const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static u32 mt9m032_row_time(struct mt9m032 *sensor, unsigned int width) +{ + unsigned int effective_width; + u32 ns; + + effective_width = width + 716; /* empirical value */ + ns = div_u64(1000000000ULL * effective_width, sensor->pix_clock); + dev_dbg(to_dev(sensor), "MT9M032 line time: %u ns\n", ns); + return ns; +} + +static int mt9m032_update_timing(struct mt9m032 *sensor, + struct v4l2_fract *interval) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct v4l2_rect *crop = &sensor->crop; + unsigned int min_vblank; + unsigned int vblank; + u32 row_time; + + if (!interval) + interval = &sensor->frame_interval; + + row_time = mt9m032_row_time(sensor, crop->width); + + vblank = div_u64(1000000000ULL * interval->numerator, + (u64)row_time * interval->denominator) + - crop->height; + + if (vblank > MT9M032_VBLANK_MAX) { + /* hardware limits to 11 bit values */ + interval->denominator = 1000; + interval->numerator = + div_u64((crop->height + MT9M032_VBLANK_MAX) * + (u64)row_time * interval->denominator, + 1000000000ULL); + vblank = div_u64(1000000000ULL * interval->numerator, + (u64)row_time * interval->denominator) + - crop->height; + } + /* enforce minimal 1.6ms blanking time. */ + min_vblank = 1600000 / row_time; + vblank = clamp_t(unsigned int, vblank, min_vblank, MT9M032_VBLANK_MAX); + + return mt9m032_write(client, MT9M032_VBLANK, vblank); +} + +static int mt9m032_update_geom_timing(struct mt9m032 *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int ret; + + ret = mt9m032_write(client, MT9M032_COLUMN_SIZE, + sensor->crop.width - 1); + if (!ret) + ret = mt9m032_write(client, MT9M032_ROW_SIZE, + sensor->crop.height - 1); + if (!ret) + ret = mt9m032_write(client, MT9M032_COLUMN_START, + sensor->crop.left); + if (!ret) + ret = mt9m032_write(client, MT9M032_ROW_START, + sensor->crop.top); + if (!ret) + ret = mt9m032_update_timing(sensor, NULL); + return ret; +} + +static int update_formatter2(struct mt9m032 *sensor, bool streaming) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + u16 reg_val = MT9M032_FORMATTER2_DOUT_EN + | 0x0070; /* parts reserved! */ + /* possibly for changing to 14-bit mode */ + + if (streaming) + reg_val |= MT9M032_FORMATTER2_PIXCLK_EN; /* pixclock enable */ + + return mt9m032_write(client, MT9M032_FORMATTER2, reg_val); +} + +static int mt9m032_setup_pll(struct mt9m032 *sensor) +{ + static const struct aptina_pll_limits limits = { + .ext_clock_min = 8000000, + .ext_clock_max = 16500000, + .int_clock_min = 2000000, + .int_clock_max = 24000000, + .out_clock_min = 322000000, + .out_clock_max = 693000000, + .pix_clock_max = 99000000, + .n_min = 1, + .n_max = 64, + .m_min = 16, + .m_max = 255, + .p1_min = 6, + .p1_max = 7, + }; + + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct mt9m032_platform_data *pdata = sensor->pdata; + struct aptina_pll pll; + u16 reg_val; + int ret; + + pll.ext_clock = pdata->ext_clock; + pll.pix_clock = pdata->pix_clock; + + ret = aptina_pll_calculate(&client->dev, &limits, &pll); + if (ret < 0) + return ret; + + sensor->pix_clock = pdata->pix_clock; + + ret = mt9m032_write(client, MT9M032_PLL_CONFIG1, + (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT) | + ((pll.n - 1) & MT9M032_PLL_CONFIG1_PREDIV_MASK)); + if (!ret) + ret = mt9m032_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWRON | + MT9P031_PLL_CONTROL_USEPLL); + if (!ret) /* more reserved, Continuous, Master Mode */ + ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8000 | + MT9M032_READ_MODE1_STROBE_START_EXP | + MT9M032_READ_MODE1_STROBE_END_SHUTTER); + if (!ret) { + reg_val = (pll.p1 == 6 ? MT9M032_FORMATTER1_PLL_P1_6 : 0) + | MT9M032_FORMATTER1_PARALLEL | 0x001e; /* 14-bit */ + ret = mt9m032_write(client, MT9M032_FORMATTER1, reg_val); + } + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Subdev pad operations + */ + +static int mt9m032_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index != 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_Y8_1X8; + return 0; +} + +static int mt9m032_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index != 0 || fse->code != V4L2_MBUS_FMT_Y8_1X8) + return -EINVAL; + + fse->min_width = MT9M032_COLUMN_SIZE_DEF; + fse->max_width = MT9M032_COLUMN_SIZE_DEF; + fse->min_height = MT9M032_ROW_SIZE_DEF; + fse->max_height = MT9M032_ROW_SIZE_DEF; + + return 0; +} + +/** + * __mt9m032_get_pad_crop() - get crop rect + * @sensor: pointer to the sensor struct + * @fh: file handle for getting the try crop rect from + * @which: select try or active crop rect + * + * Returns a pointer the current active or fh relative try crop rect + */ +static struct v4l2_rect * +__mt9m032_get_pad_crop(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, 0); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->crop; + default: + return NULL; + } +} + +/** + * __mt9m032_get_pad_format() - get format + * @sensor: pointer to the sensor struct + * @fh: file handle for getting the try format from + * @which: select try or active format + * + * Returns a pointer the current active or fh relative try format + */ +static struct v4l2_mbus_framefmt * +__mt9m032_get_pad_format(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, 0); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->format; + default: + return NULL; + } +} + +static int mt9m032_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which); + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + ret = -EBUSY; + goto done; + } + + /* Scaling is not supported, the format is thus fixed. */ + fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which); + ret = 0; + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_get_pad_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + crop->rect = *__mt9m032_get_pad_crop(sensor, fh, crop->which); + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_pad_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + int ret = 0; + + mutex_lock(&sensor->lock); + + if (sensor->streaming && crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + ret = -EBUSY; + goto done; + } + + /* Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels to ensure a GRBG Bayer pattern. + */ + rect.left = clamp(ALIGN(crop->rect.left, 2), MT9M032_COLUMN_START_MIN, + MT9M032_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top, 2), MT9M032_ROW_START_MIN, + MT9M032_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), MT9M032_COLUMN_SIZE_MIN, + MT9M032_COLUMN_SIZE_MAX); + rect.height = clamp(ALIGN(crop->rect.height, 2), MT9M032_ROW_SIZE_MIN, + MT9M032_ROW_SIZE_MAX); + + rect.width = min(rect.width, MT9M032_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9M032_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9m032_get_pad_crop(sensor, fh, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + format = __mt9m032_get_pad_format(sensor, fh, crop->which); + format->width = rect.width; + format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ret = mt9m032_update_geom_timing(sensor); + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_get_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + memset(fi, 0, sizeof(*fi)); + fi->interval = sensor->frame_interval; + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming) { + ret = -EBUSY; + goto done; + } + + /* Avoid divisions by 0. */ + if (fi->interval.denominator == 0) + fi->interval.denominator = 1; + + ret = mt9m032_update_timing(sensor, &fi->interval); + if (!ret) + sensor->frame_interval = fi->interval; + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_s_stream(struct v4l2_subdev *subdev, int streaming) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + ret = update_formatter2(sensor, streaming); + if (!ret) + sensor->streaming = streaming; + mutex_unlock(&sensor->lock); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m032_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct mt9m032 *sensor = to_mt9m032(sd); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int val; + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + if (reg->match.addr != client->addr) + return -ENODEV; + + val = mt9m032_read(client, reg->reg); + if (val < 0) + return -EIO; + + reg->size = 2; + reg->val = val; + + return 0; +} + +static int mt9m032_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct mt9m032 *sensor = to_mt9m032(sd); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + return mt9m032_write(client, reg->reg, reg->val); +} +#endif + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +static int update_read_mode2(struct mt9m032 *sensor, bool vflip, bool hflip) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int reg_val = (vflip << MT9M032_READ_MODE2_VFLIP_SHIFT) + | (hflip << MT9M032_READ_MODE2_HFLIP_SHIFT) + | MT9M032_READ_MODE2_ROW_BLC + | 0x0007; + + return mt9m032_write(client, MT9M032_READ_MODE2, reg_val); +} + +static int mt9m032_set_gain(struct mt9m032 *sensor, s32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int digital_gain_val; /* in 1/8th (0..127) */ + int analog_mul; /* 0 or 1 */ + int analog_gain_val; /* in 1/16th. (0..63) */ + u16 reg_val; + + digital_gain_val = 51; /* from setup example */ + + if (val < 63) { + analog_mul = 0; + analog_gain_val = val; + } else { + analog_mul = 1; + analog_gain_val = val / 2; + } + + /* a_gain = (1 + analog_mul) + (analog_gain_val + 1) / 16 */ + /* overall_gain = a_gain * (1 + digital_gain_val / 8) */ + + reg_val = ((digital_gain_val & MT9M032_GAIN_DIGITAL_MASK) + << MT9M032_GAIN_DIGITAL_SHIFT) + | ((analog_mul & 1) << MT9M032_GAIN_AMUL_SHIFT) + | (analog_gain_val & MT9M032_GAIN_ANALOG_MASK); + + return mt9m032_write(client, MT9M032_GAIN_ALL, reg_val); +} + +static int mt9m032_try_ctrl(struct v4l2_ctrl *ctrl) +{ + if (ctrl->id == V4L2_CID_GAIN && ctrl->val >= 63) { + /* round because of multiplier used for values >= 63 */ + ctrl->val &= ~1; + } + + return 0; +} + +static int mt9m032_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m032 *sensor = + container_of(ctrl->handler, struct mt9m032, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int ret; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + return mt9m032_set_gain(sensor, ctrl->val); + + case V4L2_CID_HFLIP: + /* case V4L2_CID_VFLIP: -- In the same cluster */ + return update_read_mode2(sensor, sensor->vflip->val, + sensor->hflip->val); + + case V4L2_CID_EXPOSURE: + ret = mt9m032_write(client, MT9M032_SHUTTER_WIDTH_HIGH, + (ctrl->val >> 16) & 0xffff); + if (ret < 0) + return ret; + + return mt9m032_write(client, MT9M032_SHUTTER_WIDTH_LOW, + ctrl->val & 0xffff); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9m032_ctrl_ops = { + .s_ctrl = mt9m032_set_ctrl, + .try_ctrl = mt9m032_try_ctrl, +}; + +/* -------------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops mt9m032_core_ops = { +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9m032_g_register, + .s_register = mt9m032_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9m032_video_ops = { + .s_stream = mt9m032_s_stream, + .g_frame_interval = mt9m032_get_frame_interval, + .s_frame_interval = mt9m032_set_frame_interval, +}; + +static const struct v4l2_subdev_pad_ops mt9m032_pad_ops = { + .enum_mbus_code = mt9m032_enum_mbus_code, + .enum_frame_size = mt9m032_enum_frame_size, + .get_fmt = mt9m032_get_pad_format, + .set_fmt = mt9m032_set_pad_format, + .set_crop = mt9m032_set_pad_crop, + .get_crop = mt9m032_get_pad_crop, +}; + +static const struct v4l2_subdev_ops mt9m032_ops = { + .core = &mt9m032_core_ops, + .video = &mt9m032_video_ops, + .pad = &mt9m032_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * Driver initialization and probing + */ + +static int mt9m032_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct mt9m032_platform_data *pdata = client->dev.platform_data; + struct i2c_adapter *adapter = client->adapter; + struct mt9m032 *sensor; + int chip_version; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + if (!client->dev.platform_data) + return -ENODEV; + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) + return -ENOMEM; + + mutex_init(&sensor->lock); + + sensor->pdata = pdata; + + v4l2_i2c_subdev_init(&sensor->subdev, client, &mt9m032_ops); + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION); + if (chip_version != MT9M032_CHIP_VERSION_VALUE) { + dev_err(&client->dev, "MT9M032 not detected, wrong version " + "0x%04x\n", chip_version); + ret = -ENODEV; + goto error_sensor; + } + + dev_info(&client->dev, "MT9M032 detected at address 0x%02x\n", + client->addr); + + sensor->frame_interval.numerator = 1; + sensor->frame_interval.denominator = 30; + + sensor->crop.left = MT9M032_COLUMN_START_DEF; + sensor->crop.top = MT9M032_ROW_START_DEF; + sensor->crop.width = MT9M032_COLUMN_SIZE_DEF; + sensor->crop.height = MT9M032_ROW_SIZE_DEF; + + sensor->format.width = sensor->crop.width; + sensor->format.height = sensor->crop.height; + sensor->format.code = V4L2_MBUS_FMT_Y8_1X8; + sensor->format.field = V4L2_FIELD_NONE; + sensor->format.colorspace = V4L2_COLORSPACE_SRGB; + + v4l2_ctrl_handler_init(&sensor->ctrls, 5); + + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + + sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls, + &mt9m032_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls, + &mt9m032_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_EXPOSURE, MT9M032_SHUTTER_WIDTH_MIN, + MT9M032_SHUTTER_WIDTH_MAX, 1, + MT9M032_SHUTTER_WIDTH_DEF); + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_PIXEL_RATE, pdata->pix_clock, + pdata->pix_clock, 1, pdata->pix_clock); + + if (sensor->ctrls.error) { + ret = sensor->ctrls.error; + dev_err(&client->dev, "control initialization error %d\n", ret); + goto error_ctrl; + } + + v4l2_ctrl_cluster(2, &sensor->hflip); + + sensor->subdev.ctrl_handler = &sensor->ctrls; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad, 0); + if (ret < 0) + goto error_ctrl; + + ret = mt9m032_write(client, MT9M032_RESET, 1); /* reset on */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, MT9M032_RESET, 0); /* reset off */ + if (ret < 0) + goto error_entity; + + ret = mt9m032_setup_pll(sensor); + if (ret < 0) + goto error_entity; + usleep_range(10000, 11000); + + ret = v4l2_ctrl_handler_setup(&sensor->ctrls); + if (ret < 0) + goto error_entity; + + /* SIZE */ + ret = mt9m032_update_geom_timing(sensor); + if (ret < 0) + goto error_entity; + + ret = mt9m032_write(client, 0x41, 0x0000); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x42, 0x0003); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x43, 0x0003); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x7f, 0x0000); /* reserved !!! */ + if (ret < 0) + goto error_entity; + if (sensor->pdata->invert_pixclock) { + ret = mt9m032_write(client, MT9M032_PIX_CLK_CTRL, + MT9M032_PIX_CLK_CTRL_INV_PIXCLK); + if (ret < 0) + goto error_entity; + } + + ret = mt9m032_write(client, MT9M032_RESTART, 1); /* Restart on */ + if (ret < 0) + goto error_entity; + msleep(100); + ret = mt9m032_write(client, MT9M032_RESTART, 0); /* Restart off */ + if (ret < 0) + goto error_entity; + msleep(100); + ret = update_formatter2(sensor, false); + if (ret < 0) + goto error_entity; + + return ret; + +error_entity: + media_entity_cleanup(&sensor->subdev.entity); +error_ctrl: + v4l2_ctrl_handler_free(&sensor->ctrls); +error_sensor: + mutex_destroy(&sensor->lock); + kfree(sensor); + return ret; +} + +static int mt9m032_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9m032 *sensor = to_mt9m032(subdev); + + v4l2_device_unregister_subdev(subdev); + v4l2_ctrl_handler_free(&sensor->ctrls); + media_entity_cleanup(&subdev->entity); + mutex_destroy(&sensor->lock); + kfree(sensor); + return 0; +} + +static const struct i2c_device_id mt9m032_id_table[] = { + { MT9M032_NAME, 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, mt9m032_id_table); + +static struct i2c_driver mt9m032_i2c_driver = { + .driver = { + .name = MT9M032_NAME, + }, + .probe = mt9m032_probe, + .remove = mt9m032_remove, + .id_table = mt9m032_id_table, +}; + +module_i2c_driver(mt9m032_i2c_driver); + +MODULE_AUTHOR("Martin Hostettler "); +MODULE_DESCRIPTION("MT9M032 camera sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c new file mode 100644 index 00000000..28cf95b3 --- /dev/null +++ b/drivers/media/i2c/mt9p031.c @@ -0,0 +1,1086 @@ +/* + * Driver for MT9P031 CMOS Image Sensor from Aptina + * + * Copyright (C) 2011, Laurent Pinchart + * Copyright (C) 2011, Javier Martin + * Copyright (C) 2011, Guennadi Liakhovetski + * + * Based on the MT9V032 driver and Bastian Hecht's code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "aptina-pll.h" + +#define MT9P031_PIXEL_ARRAY_WIDTH 2752 +#define MT9P031_PIXEL_ARRAY_HEIGHT 2004 + +#define MT9P031_CHIP_VERSION 0x00 +#define MT9P031_CHIP_VERSION_VALUE 0x1801 +#define MT9P031_ROW_START 0x01 +#define MT9P031_ROW_START_MIN 0 +#define MT9P031_ROW_START_MAX 2004 +#define MT9P031_ROW_START_DEF 54 +#define MT9P031_COLUMN_START 0x02 +#define MT9P031_COLUMN_START_MIN 0 +#define MT9P031_COLUMN_START_MAX 2750 +#define MT9P031_COLUMN_START_DEF 16 +#define MT9P031_WINDOW_HEIGHT 0x03 +#define MT9P031_WINDOW_HEIGHT_MIN 2 +#define MT9P031_WINDOW_HEIGHT_MAX 2006 +#define MT9P031_WINDOW_HEIGHT_DEF 1944 +#define MT9P031_WINDOW_WIDTH 0x04 +#define MT9P031_WINDOW_WIDTH_MIN 2 +#define MT9P031_WINDOW_WIDTH_MAX 2752 +#define MT9P031_WINDOW_WIDTH_DEF 2592 +#define MT9P031_HORIZONTAL_BLANK 0x05 +#define MT9P031_HORIZONTAL_BLANK_MIN 0 +#define MT9P031_HORIZONTAL_BLANK_MAX 4095 +#define MT9P031_VERTICAL_BLANK 0x06 +#define MT9P031_VERTICAL_BLANK_MIN 1 +#define MT9P031_VERTICAL_BLANK_MAX 4096 +#define MT9P031_VERTICAL_BLANK_DEF 26 +#define MT9P031_OUTPUT_CONTROL 0x07 +#define MT9P031_OUTPUT_CONTROL_CEN 2 +#define MT9P031_OUTPUT_CONTROL_SYN 1 +#define MT9P031_OUTPUT_CONTROL_DEF 0x1f82 +#define MT9P031_SHUTTER_WIDTH_UPPER 0x08 +#define MT9P031_SHUTTER_WIDTH_LOWER 0x09 +#define MT9P031_SHUTTER_WIDTH_MIN 1 +#define MT9P031_SHUTTER_WIDTH_MAX 1048575 +#define MT9P031_SHUTTER_WIDTH_DEF 1943 +#define MT9P031_PLL_CONTROL 0x10 +#define MT9P031_PLL_CONTROL_PWROFF 0x0050 +#define MT9P031_PLL_CONTROL_PWRON 0x0051 +#define MT9P031_PLL_CONTROL_USEPLL 0x0052 +#define MT9P031_PLL_CONFIG_1 0x11 +#define MT9P031_PLL_CONFIG_2 0x12 +#define MT9P031_PIXEL_CLOCK_CONTROL 0x0a +#define MT9P031_FRAME_RESTART 0x0b +#define MT9P031_SHUTTER_DELAY 0x0c +#define MT9P031_RST 0x0d +#define MT9P031_RST_ENABLE 1 +#define MT9P031_RST_DISABLE 0 +#define MT9P031_READ_MODE_1 0x1e +#define MT9P031_READ_MODE_2 0x20 +#define MT9P031_READ_MODE_2_ROW_MIR (1 << 15) +#define MT9P031_READ_MODE_2_COL_MIR (1 << 14) +#define MT9P031_READ_MODE_2_ROW_BLC (1 << 6) +#define MT9P031_ROW_ADDRESS_MODE 0x22 +#define MT9P031_COLUMN_ADDRESS_MODE 0x23 +#define MT9P031_GLOBAL_GAIN 0x35 +#define MT9P031_GLOBAL_GAIN_MIN 8 +#define MT9P031_GLOBAL_GAIN_MAX 1024 +#define MT9P031_GLOBAL_GAIN_DEF 8 +#define MT9P031_GLOBAL_GAIN_MULT (1 << 6) +#define MT9P031_ROW_BLACK_TARGET 0x49 +#define MT9P031_ROW_BLACK_DEF_OFFSET 0x4b +#define MT9P031_GREEN1_OFFSET 0x60 +#define MT9P031_GREEN2_OFFSET 0x61 +#define MT9P031_BLACK_LEVEL_CALIBRATION 0x62 +#define MT9P031_BLC_MANUAL_BLC (1 << 0) +#define MT9P031_RED_OFFSET 0x63 +#define MT9P031_BLUE_OFFSET 0x64 +#define MT9P031_TEST_PATTERN 0xa0 +#define MT9P031_TEST_PATTERN_SHIFT 3 +#define MT9P031_TEST_PATTERN_ENABLE (1 << 0) +#define MT9P031_TEST_PATTERN_DISABLE (0 << 0) +#define MT9P031_TEST_PATTERN_GREEN 0xa1 +#define MT9P031_TEST_PATTERN_RED 0xa2 +#define MT9P031_TEST_PATTERN_BLUE 0xa3 + +enum mt9p031_model { + MT9P031_MODEL_COLOR, + MT9P031_MODEL_MONOCHROME, +}; + +struct mt9p031 { + struct v4l2_subdev subdev; + struct media_pad pad; + struct v4l2_rect crop; /* Sensor window */ + struct v4l2_mbus_framefmt format; + struct mt9p031_platform_data *pdata; + struct mutex power_lock; /* lock to protect power_count */ + int power_count; + + struct clk *clk; + struct regulator *vaa; + struct regulator *vdd; + struct regulator *vdd_io; + + enum mt9p031_model model; + struct aptina_pll pll; + int reset; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *blc_auto; + struct v4l2_ctrl *blc_offset; + + /* Registers cache */ + u16 output_control; + u16 mode2; +}; + +static struct mt9p031 *to_mt9p031(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9p031, subdev); +} + +static int mt9p031_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int mt9p031_write(struct i2c_client *client, u8 reg, u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int mt9p031_set_output_control(struct mt9p031 *mt9p031, u16 clear, + u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + u16 value = (mt9p031->output_control & ~clear) | set; + int ret; + + ret = mt9p031_write(client, MT9P031_OUTPUT_CONTROL, value); + if (ret < 0) + return ret; + + mt9p031->output_control = value; + return 0; +} + +static int mt9p031_set_mode2(struct mt9p031 *mt9p031, u16 clear, u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + u16 value = (mt9p031->mode2 & ~clear) | set; + int ret; + + ret = mt9p031_write(client, MT9P031_READ_MODE_2, value); + if (ret < 0) + return ret; + + mt9p031->mode2 = value; + return 0; +} + +static int mt9p031_reset(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + int ret; + + /* Disable chip output, synchronous option update */ + ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_ENABLE); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_DISABLE); + if (ret < 0) + return ret; + + return mt9p031_set_output_control(mt9p031, MT9P031_OUTPUT_CONTROL_CEN, + 0); +} + +static int mt9p031_clk_setup(struct mt9p031 *mt9p031) +{ + static const struct aptina_pll_limits limits = { + .ext_clock_min = 6000000, + .ext_clock_max = 27000000, + .int_clock_min = 2000000, + .int_clock_max = 13500000, + .out_clock_min = 180000000, + .out_clock_max = 360000000, + .pix_clock_max = 96000000, + .n_min = 1, + .n_max = 64, + .m_min = 16, + .m_max = 255, + .p1_min = 1, + .p1_max = 128, + }; + + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + struct mt9p031_platform_data *pdata = mt9p031->pdata; + + mt9p031->clk = devm_clk_get(&client->dev, NULL); + if (IS_ERR(mt9p031->clk)) + return PTR_ERR(mt9p031->clk); + + clk_set_rate(mt9p031->clk, pdata->ext_freq); + + mt9p031->pll.ext_clock = pdata->ext_freq; + mt9p031->pll.pix_clock = pdata->target_freq; + + return aptina_pll_calculate(&client->dev, &limits, &mt9p031->pll); +} + +static int mt9p031_pll_enable(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + int ret; + + ret = mt9p031_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWRON); + if (ret < 0) + return ret; + + ret = mt9p031_write(client, MT9P031_PLL_CONFIG_1, + (mt9p031->pll.m << 8) | (mt9p031->pll.n - 1)); + if (ret < 0) + return ret; + + ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll.p1 - 1); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + ret = mt9p031_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWRON | + MT9P031_PLL_CONTROL_USEPLL); + return ret; +} + +static inline int mt9p031_pll_disable(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + + return mt9p031_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWROFF); +} + +static int mt9p031_power_on(struct mt9p031 *mt9p031) +{ + /* Ensure RESET_BAR is low */ + if (mt9p031->reset != -1) { + gpio_set_value(mt9p031->reset, 0); + usleep_range(1000, 2000); + } + + /* Bring up the supplies */ + regulator_enable(mt9p031->vdd); + regulator_enable(mt9p031->vdd_io); + regulator_enable(mt9p031->vaa); + + /* Emable clock */ + if (mt9p031->clk) + clk_prepare_enable(mt9p031->clk); + + /* Now RESET_BAR must be high */ + if (mt9p031->reset != -1) { + gpio_set_value(mt9p031->reset, 1); + usleep_range(1000, 2000); + } + + return 0; +} + +static void mt9p031_power_off(struct mt9p031 *mt9p031) +{ + if (mt9p031->reset != -1) { + gpio_set_value(mt9p031->reset, 0); + usleep_range(1000, 2000); + } + + regulator_disable(mt9p031->vaa); + regulator_disable(mt9p031->vdd_io); + regulator_disable(mt9p031->vdd); + + if (mt9p031->clk) + clk_disable_unprepare(mt9p031->clk); +} + +static int __mt9p031_set_power(struct mt9p031 *mt9p031, bool on) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + int ret; + + if (!on) { + mt9p031_power_off(mt9p031); + return 0; + } + + ret = mt9p031_power_on(mt9p031); + if (ret < 0) + return ret; + + ret = mt9p031_reset(mt9p031); + if (ret < 0) { + dev_err(&client->dev, "Failed to reset the camera\n"); + return ret; + } + + return v4l2_ctrl_handler_setup(&mt9p031->ctrls); +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev video operations + */ + +static int mt9p031_set_params(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + struct v4l2_mbus_framefmt *format = &mt9p031->format; + const struct v4l2_rect *crop = &mt9p031->crop; + unsigned int hblank; + unsigned int vblank; + unsigned int xskip; + unsigned int yskip; + unsigned int xbin; + unsigned int ybin; + int ret; + + /* Windows position and size. + * + * TODO: Make sure the start coordinates and window size match the + * skipping, binning and mirroring (see description of registers 2 and 4 + * in table 13, and Binning section on page 41). + */ + ret = mt9p031_write(client, MT9P031_COLUMN_START, crop->left); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_ROW_START, crop->top); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_WINDOW_WIDTH, crop->width - 1); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_WINDOW_HEIGHT, crop->height - 1); + if (ret < 0) + return ret; + + /* Row and column binning and skipping. Use the maximum binning value + * compatible with the skipping settings. + */ + xskip = DIV_ROUND_CLOSEST(crop->width, format->width); + yskip = DIV_ROUND_CLOSEST(crop->height, format->height); + xbin = 1 << (ffs(xskip) - 1); + ybin = 1 << (ffs(yskip) - 1); + + ret = mt9p031_write(client, MT9P031_COLUMN_ADDRESS_MODE, + ((xbin - 1) << 4) | (xskip - 1)); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_ROW_ADDRESS_MODE, + ((ybin - 1) << 4) | (yskip - 1)); + if (ret < 0) + return ret; + + /* Blanking - use minimum value for horizontal blanking and default + * value for vertical blanking. + */ + hblank = 346 * ybin + 64 + (80 >> min_t(unsigned int, xbin, 3)); + vblank = MT9P031_VERTICAL_BLANK_DEF; + + ret = mt9p031_write(client, MT9P031_HORIZONTAL_BLANK, hblank - 1); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_VERTICAL_BLANK, vblank - 1); + if (ret < 0) + return ret; + + return ret; +} + +static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + int ret; + + if (!enable) { + /* Stop sensor readout */ + ret = mt9p031_set_output_control(mt9p031, + MT9P031_OUTPUT_CONTROL_CEN, 0); + if (ret < 0) + return ret; + + return mt9p031_pll_disable(mt9p031); + } + + ret = mt9p031_set_params(mt9p031); + if (ret < 0) + return ret; + + /* Switch to master "normal" mode */ + ret = mt9p031_set_output_control(mt9p031, 0, + MT9P031_OUTPUT_CONTROL_CEN); + if (ret < 0) + return ret; + + return mt9p031_pll_enable(mt9p031); +} + +static int mt9p031_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + if (code->pad || code->index) + return -EINVAL; + + code->code = mt9p031->format.code; + return 0; +} + +static int mt9p031_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + if (fse->index >= 8 || fse->code != mt9p031->format.code) + return -EINVAL; + + fse->min_width = MT9P031_WINDOW_WIDTH_DEF + / min_t(unsigned int, 7, fse->index + 1); + fse->max_width = fse->min_width; + fse->min_height = MT9P031_WINDOW_HEIGHT_DEF / (fse->index + 1); + fse->max_height = fse->min_height; + + return 0; +} + +static struct v4l2_mbus_framefmt * +__mt9p031_get_pad_format(struct mt9p031 *mt9p031, struct v4l2_subdev_fh *fh, + unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9p031->format; + default: + return NULL; + } +} + +static struct v4l2_rect * +__mt9p031_get_pad_crop(struct mt9p031 *mt9p031, struct v4l2_subdev_fh *fh, + unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9p031->crop; + default: + return NULL; + } +} + +static int mt9p031_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + fmt->format = *__mt9p031_get_pad_format(mt9p031, fh, fmt->pad, + fmt->which); + return 0; +} + +static int mt9p031_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + unsigned int width; + unsigned int height; + unsigned int hratio; + unsigned int vratio; + + __crop = __mt9p031_get_pad_crop(mt9p031, fh, format->pad, + format->which); + + /* Clamp the width and height to avoid dividing by zero. */ + width = clamp_t(unsigned int, ALIGN(format->format.width, 2), + max(__crop->width / 7, MT9P031_WINDOW_WIDTH_MIN), + __crop->width); + height = clamp_t(unsigned int, ALIGN(format->format.height, 2), + max(__crop->height / 8, MT9P031_WINDOW_HEIGHT_MIN), + __crop->height); + + hratio = DIV_ROUND_CLOSEST(__crop->width, width); + vratio = DIV_ROUND_CLOSEST(__crop->height, height); + + __format = __mt9p031_get_pad_format(mt9p031, fh, format->pad, + format->which); + __format->width = __crop->width / hratio; + __format->height = __crop->height / vratio; + + format->format = *__format; + + return 0; +} + +static int mt9p031_get_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + crop->rect = *__mt9p031_get_pad_crop(mt9p031, fh, crop->pad, + crop->which); + return 0; +} + +static int mt9p031_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + + /* Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels to ensure a GRBG Bayer pattern. + */ + rect.left = clamp(ALIGN(crop->rect.left, 2), MT9P031_COLUMN_START_MIN, + MT9P031_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top, 2), MT9P031_ROW_START_MIN, + MT9P031_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), + MT9P031_WINDOW_WIDTH_MIN, + MT9P031_WINDOW_WIDTH_MAX); + rect.height = clamp(ALIGN(crop->rect.height, 2), + MT9P031_WINDOW_HEIGHT_MIN, + MT9P031_WINDOW_HEIGHT_MAX); + + rect.width = min(rect.width, MT9P031_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9P031_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9p031_get_pad_crop(mt9p031, fh, crop->pad, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + __format = __mt9p031_get_pad_format(mt9p031, fh, crop->pad, + crop->which); + __format->width = rect.width; + __format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +#define V4L2_CID_BLC_AUTO (V4L2_CID_USER_BASE | 0x1002) +#define V4L2_CID_BLC_TARGET_LEVEL (V4L2_CID_USER_BASE | 0x1003) +#define V4L2_CID_BLC_ANALOG_OFFSET (V4L2_CID_USER_BASE | 0x1004) +#define V4L2_CID_BLC_DIGITAL_OFFSET (V4L2_CID_USER_BASE | 0x1005) + +static int mt9p031_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9p031 *mt9p031 = + container_of(ctrl->handler, struct mt9p031, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + u16 data; + int ret; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + ret = mt9p031_write(client, MT9P031_SHUTTER_WIDTH_UPPER, + (ctrl->val >> 16) & 0xffff); + if (ret < 0) + return ret; + + return mt9p031_write(client, MT9P031_SHUTTER_WIDTH_LOWER, + ctrl->val & 0xffff); + + case V4L2_CID_GAIN: + /* Gain is controlled by 2 analog stages and a digital stage. + * Valid values for the 3 stages are + * + * Stage Min Max Step + * ------------------------------------------ + * First analog stage x1 x2 1 + * Second analog stage x1 x4 0.125 + * Digital stage x1 x16 0.125 + * + * To minimize noise, the gain stages should be used in the + * second analog stage, first analog stage, digital stage order. + * Gain from a previous stage should be pushed to its maximum + * value before the next stage is used. + */ + if (ctrl->val <= 32) { + data = ctrl->val; + } else if (ctrl->val <= 64) { + ctrl->val &= ~1; + data = (1 << 6) | (ctrl->val >> 1); + } else { + ctrl->val &= ~7; + data = ((ctrl->val - 64) << 5) | (1 << 6) | 32; + } + + return mt9p031_write(client, MT9P031_GLOBAL_GAIN, data); + + case V4L2_CID_HFLIP: + if (ctrl->val) + return mt9p031_set_mode2(mt9p031, + 0, MT9P031_READ_MODE_2_COL_MIR); + else + return mt9p031_set_mode2(mt9p031, + MT9P031_READ_MODE_2_COL_MIR, 0); + + case V4L2_CID_VFLIP: + if (ctrl->val) + return mt9p031_set_mode2(mt9p031, + 0, MT9P031_READ_MODE_2_ROW_MIR); + else + return mt9p031_set_mode2(mt9p031, + MT9P031_READ_MODE_2_ROW_MIR, 0); + + case V4L2_CID_TEST_PATTERN: + if (!ctrl->val) { + /* Restore the black level compensation settings. */ + if (mt9p031->blc_auto->cur.val != 0) { + ret = mt9p031_s_ctrl(mt9p031->blc_auto); + if (ret < 0) + return ret; + } + if (mt9p031->blc_offset->cur.val != 0) { + ret = mt9p031_s_ctrl(mt9p031->blc_offset); + if (ret < 0) + return ret; + } + return mt9p031_write(client, MT9P031_TEST_PATTERN, + MT9P031_TEST_PATTERN_DISABLE); + } + + ret = mt9p031_write(client, MT9P031_TEST_PATTERN_GREEN, 0x05a0); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_TEST_PATTERN_RED, 0x0a50); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_TEST_PATTERN_BLUE, 0x0aa0); + if (ret < 0) + return ret; + + /* Disable digital black level compensation when using a test + * pattern. + */ + ret = mt9p031_set_mode2(mt9p031, MT9P031_READ_MODE_2_ROW_BLC, + 0); + if (ret < 0) + return ret; + + ret = mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET, 0); + if (ret < 0) + return ret; + + return mt9p031_write(client, MT9P031_TEST_PATTERN, + ((ctrl->val - 1) << MT9P031_TEST_PATTERN_SHIFT) + | MT9P031_TEST_PATTERN_ENABLE); + + case V4L2_CID_BLC_AUTO: + ret = mt9p031_set_mode2(mt9p031, + ctrl->val ? 0 : MT9P031_READ_MODE_2_ROW_BLC, + ctrl->val ? MT9P031_READ_MODE_2_ROW_BLC : 0); + if (ret < 0) + return ret; + + return mt9p031_write(client, MT9P031_BLACK_LEVEL_CALIBRATION, + ctrl->val ? 0 : MT9P031_BLC_MANUAL_BLC); + + case V4L2_CID_BLC_TARGET_LEVEL: + return mt9p031_write(client, MT9P031_ROW_BLACK_TARGET, + ctrl->val); + + case V4L2_CID_BLC_ANALOG_OFFSET: + data = ctrl->val & ((1 << 9) - 1); + + ret = mt9p031_write(client, MT9P031_GREEN1_OFFSET, data); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_GREEN2_OFFSET, data); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_RED_OFFSET, data); + if (ret < 0) + return ret; + return mt9p031_write(client, MT9P031_BLUE_OFFSET, data); + + case V4L2_CID_BLC_DIGITAL_OFFSET: + return mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET, + ctrl->val & ((1 << 12) - 1)); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9p031_ctrl_ops = { + .s_ctrl = mt9p031_s_ctrl, +}; + +static const char * const mt9p031_test_pattern_menu[] = { + "Disabled", + "Color Field", + "Horizontal Gradient", + "Vertical Gradient", + "Diagonal Gradient", + "Classic Test Pattern", + "Walking 1s", + "Monochrome Horizontal Bars", + "Monochrome Vertical Bars", + "Vertical Color Bars", +}; + +static const struct v4l2_ctrl_config mt9p031_ctrls[] = { + { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_BLC_AUTO, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "BLC, Auto", + .min = 0, + .max = 1, + .step = 1, + .def = 1, + .flags = 0, + }, { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_BLC_TARGET_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "BLC Target Level", + .min = 0, + .max = 4095, + .step = 1, + .def = 168, + .flags = 0, + }, { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_BLC_ANALOG_OFFSET, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "BLC Analog Offset", + .min = -255, + .max = 255, + .step = 1, + .def = 32, + .flags = 0, + }, { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_BLC_DIGITAL_OFFSET, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "BLC Digital Offset", + .min = -2048, + .max = 2047, + .step = 1, + .def = 40, + .flags = 0, + } +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +static int mt9p031_set_power(struct v4l2_subdev *subdev, int on) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + int ret = 0; + + mutex_lock(&mt9p031->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (mt9p031->power_count == !on) { + ret = __mt9p031_set_power(mt9p031, !!on); + if (ret < 0) + goto out; + } + + /* Update the power count. */ + mt9p031->power_count += on ? 1 : -1; + WARN_ON(mt9p031->power_count < 0); + +out: + mutex_unlock(&mt9p031->power_lock); + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev internal operations + */ + +static int mt9p031_registered(struct v4l2_subdev *subdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + s32 data; + int ret; + + ret = mt9p031_power_on(mt9p031); + if (ret < 0) { + dev_err(&client->dev, "MT9P031 power up failed\n"); + return ret; + } + + /* Read out the chip version register */ + data = mt9p031_read(client, MT9P031_CHIP_VERSION); + if (data != MT9P031_CHIP_VERSION_VALUE) { + dev_err(&client->dev, "MT9P031 not detected, wrong version " + "0x%04x\n", data); + return -ENODEV; + } + + mt9p031_power_off(mt9p031); + + dev_info(&client->dev, "MT9P031 detected at address 0x%02x\n", + client->addr); + + return ret; +} + +static int mt9p031_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + crop = v4l2_subdev_get_try_crop(fh, 0); + crop->left = MT9P031_COLUMN_START_DEF; + crop->top = MT9P031_ROW_START_DEF; + crop->width = MT9P031_WINDOW_WIDTH_DEF; + crop->height = MT9P031_WINDOW_HEIGHT_DEF; + + format = v4l2_subdev_get_try_format(fh, 0); + + if (mt9p031->model == MT9P031_MODEL_MONOCHROME) + format->code = V4L2_MBUS_FMT_Y12_1X12; + else + format->code = V4L2_MBUS_FMT_SGRBG12_1X12; + + format->width = MT9P031_WINDOW_WIDTH_DEF; + format->height = MT9P031_WINDOW_HEIGHT_DEF; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + return mt9p031_set_power(subdev, 1); +} + +static int mt9p031_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + return mt9p031_set_power(subdev, 0); +} + +static struct v4l2_subdev_core_ops mt9p031_subdev_core_ops = { + .s_power = mt9p031_set_power, +}; + +static struct v4l2_subdev_video_ops mt9p031_subdev_video_ops = { + .s_stream = mt9p031_s_stream, +}; + +static struct v4l2_subdev_pad_ops mt9p031_subdev_pad_ops = { + .enum_mbus_code = mt9p031_enum_mbus_code, + .enum_frame_size = mt9p031_enum_frame_size, + .get_fmt = mt9p031_get_format, + .set_fmt = mt9p031_set_format, + .get_crop = mt9p031_get_crop, + .set_crop = mt9p031_set_crop, +}; + +static struct v4l2_subdev_ops mt9p031_subdev_ops = { + .core = &mt9p031_subdev_core_ops, + .video = &mt9p031_subdev_video_ops, + .pad = &mt9p031_subdev_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = { + .registered = mt9p031_registered, + .open = mt9p031_open, + .close = mt9p031_close, +}; + +/* ----------------------------------------------------------------------------- + * Driver initialization and probing + */ + +static int mt9p031_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9p031_platform_data *pdata = client->dev.platform_data; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct mt9p031 *mt9p031; + unsigned int i; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9p031 = devm_kzalloc(&client->dev, sizeof(*mt9p031), GFP_KERNEL); + if (mt9p031 == NULL) + return -ENOMEM; + + mt9p031->pdata = pdata; + mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; + mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; + mt9p031->model = did->driver_data; + mt9p031->reset = -1; + + mt9p031->vaa = devm_regulator_get(&client->dev, "vaa"); + mt9p031->vdd = devm_regulator_get(&client->dev, "vdd"); + mt9p031->vdd_io = devm_regulator_get(&client->dev, "vdd_io"); + + if (IS_ERR(mt9p031->vaa) || IS_ERR(mt9p031->vdd) || + IS_ERR(mt9p031->vdd_io)) { + dev_err(&client->dev, "Unable to get regulators\n"); + return -ENODEV; + } + + v4l2_ctrl_handler_init(&mt9p031->ctrls, ARRAY_SIZE(mt9p031_ctrls) + 6); + + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_EXPOSURE, MT9P031_SHUTTER_WIDTH_MIN, + MT9P031_SHUTTER_WIDTH_MAX, 1, + MT9P031_SHUTTER_WIDTH_DEF); + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_GAIN, MT9P031_GLOBAL_GAIN_MIN, + MT9P031_GLOBAL_GAIN_MAX, 1, MT9P031_GLOBAL_GAIN_DEF); + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_PIXEL_RATE, pdata->target_freq, + pdata->target_freq, 1, pdata->target_freq); + v4l2_ctrl_new_std_menu_items(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(mt9p031_test_pattern_menu) - 1, 0, + 0, mt9p031_test_pattern_menu); + + for (i = 0; i < ARRAY_SIZE(mt9p031_ctrls); ++i) + v4l2_ctrl_new_custom(&mt9p031->ctrls, &mt9p031_ctrls[i], NULL); + + mt9p031->subdev.ctrl_handler = &mt9p031->ctrls; + + if (mt9p031->ctrls.error) { + printk(KERN_INFO "%s: control initialization error %d\n", + __func__, mt9p031->ctrls.error); + ret = mt9p031->ctrls.error; + goto done; + } + + mt9p031->blc_auto = v4l2_ctrl_find(&mt9p031->ctrls, V4L2_CID_BLC_AUTO); + mt9p031->blc_offset = v4l2_ctrl_find(&mt9p031->ctrls, + V4L2_CID_BLC_DIGITAL_OFFSET); + + mutex_init(&mt9p031->power_lock); + v4l2_i2c_subdev_init(&mt9p031->subdev, client, &mt9p031_subdev_ops); + mt9p031->subdev.internal_ops = &mt9p031_subdev_internal_ops; + + mt9p031->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&mt9p031->subdev.entity, 1, &mt9p031->pad, 0); + if (ret < 0) + goto done; + + mt9p031->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + mt9p031->crop.width = MT9P031_WINDOW_WIDTH_DEF; + mt9p031->crop.height = MT9P031_WINDOW_HEIGHT_DEF; + mt9p031->crop.left = MT9P031_COLUMN_START_DEF; + mt9p031->crop.top = MT9P031_ROW_START_DEF; + + if (mt9p031->model == MT9P031_MODEL_MONOCHROME) + mt9p031->format.code = V4L2_MBUS_FMT_Y12_1X12; + else + mt9p031->format.code = V4L2_MBUS_FMT_SGRBG12_1X12; + + mt9p031->format.width = MT9P031_WINDOW_WIDTH_DEF; + mt9p031->format.height = MT9P031_WINDOW_HEIGHT_DEF; + mt9p031->format.field = V4L2_FIELD_NONE; + mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB; + + if (pdata->reset != -1) { + ret = devm_gpio_request_one(&client->dev, pdata->reset, + GPIOF_OUT_INIT_LOW, "mt9p031_rst"); + if (ret < 0) + goto done; + + mt9p031->reset = pdata->reset; + } + + ret = mt9p031_clk_setup(mt9p031); + +done: + if (ret < 0) { + v4l2_ctrl_handler_free(&mt9p031->ctrls); + media_entity_cleanup(&mt9p031->subdev.entity); + } + + return ret; +} + +static int mt9p031_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + v4l2_ctrl_handler_free(&mt9p031->ctrls); + v4l2_device_unregister_subdev(subdev); + media_entity_cleanup(&subdev->entity); + + return 0; +} + +static const struct i2c_device_id mt9p031_id[] = { + { "mt9p031", MT9P031_MODEL_COLOR }, + { "mt9p031m", MT9P031_MODEL_MONOCHROME }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9p031_id); + +static struct i2c_driver mt9p031_i2c_driver = { + .driver = { + .name = "mt9p031", + }, + .probe = mt9p031_probe, + .remove = mt9p031_remove, + .id_table = mt9p031_id, +}; + +module_i2c_driver(mt9p031_i2c_driver); + +MODULE_DESCRIPTION("Aptina MT9P031 Camera driver"); +MODULE_AUTHOR("Bastian Hecht "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/mt9t001.c b/drivers/media/i2c/mt9t001.c new file mode 100644 index 00000000..2e189d8b --- /dev/null +++ b/drivers/media/i2c/mt9t001.c @@ -0,0 +1,841 @@ +/* + * Driver for MT9T001 CMOS Image Sensor from Aptina (Micron) + * + * Copyright (C) 2010-2011, Laurent Pinchart + * + * Based on the MT9M001 driver, + * + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define MT9T001_PIXEL_ARRAY_HEIGHT 1568 +#define MT9T001_PIXEL_ARRAY_WIDTH 2112 + +#define MT9T001_CHIP_VERSION 0x00 +#define MT9T001_CHIP_ID 0x1621 +#define MT9T001_ROW_START 0x01 +#define MT9T001_ROW_START_MIN 0 +#define MT9T001_ROW_START_DEF 20 +#define MT9T001_ROW_START_MAX 1534 +#define MT9T001_COLUMN_START 0x02 +#define MT9T001_COLUMN_START_MIN 0 +#define MT9T001_COLUMN_START_DEF 32 +#define MT9T001_COLUMN_START_MAX 2046 +#define MT9T001_WINDOW_HEIGHT 0x03 +#define MT9T001_WINDOW_HEIGHT_MIN 1 +#define MT9T001_WINDOW_HEIGHT_DEF 1535 +#define MT9T001_WINDOW_HEIGHT_MAX 1567 +#define MT9T001_WINDOW_WIDTH 0x04 +#define MT9T001_WINDOW_WIDTH_MIN 1 +#define MT9T001_WINDOW_WIDTH_DEF 2047 +#define MT9T001_WINDOW_WIDTH_MAX 2111 +#define MT9T001_HORIZONTAL_BLANKING 0x05 +#define MT9T001_HORIZONTAL_BLANKING_MIN 21 +#define MT9T001_HORIZONTAL_BLANKING_MAX 1023 +#define MT9T001_VERTICAL_BLANKING 0x06 +#define MT9T001_VERTICAL_BLANKING_MIN 3 +#define MT9T001_VERTICAL_BLANKING_MAX 1023 +#define MT9T001_OUTPUT_CONTROL 0x07 +#define MT9T001_OUTPUT_CONTROL_SYNC (1 << 0) +#define MT9T001_OUTPUT_CONTROL_CHIP_ENABLE (1 << 1) +#define MT9T001_OUTPUT_CONTROL_TEST_DATA (1 << 6) +#define MT9T001_SHUTTER_WIDTH_HIGH 0x08 +#define MT9T001_SHUTTER_WIDTH_LOW 0x09 +#define MT9T001_SHUTTER_WIDTH_MIN 1 +#define MT9T001_SHUTTER_WIDTH_DEF 1561 +#define MT9T001_SHUTTER_WIDTH_MAX (1024 * 1024) +#define MT9T001_PIXEL_CLOCK 0x0a +#define MT9T001_PIXEL_CLOCK_INVERT (1 << 15) +#define MT9T001_PIXEL_CLOCK_SHIFT_MASK (7 << 8) +#define MT9T001_PIXEL_CLOCK_SHIFT_SHIFT 8 +#define MT9T001_PIXEL_CLOCK_DIVIDE_MASK (0x7f << 0) +#define MT9T001_FRAME_RESTART 0x0b +#define MT9T001_SHUTTER_DELAY 0x0c +#define MT9T001_SHUTTER_DELAY_MAX 2047 +#define MT9T001_RESET 0x0d +#define MT9T001_READ_MODE1 0x1e +#define MT9T001_READ_MODE_SNAPSHOT (1 << 8) +#define MT9T001_READ_MODE_STROBE_ENABLE (1 << 9) +#define MT9T001_READ_MODE_STROBE_WIDTH (1 << 10) +#define MT9T001_READ_MODE_STROBE_OVERRIDE (1 << 11) +#define MT9T001_READ_MODE2 0x20 +#define MT9T001_READ_MODE_BAD_FRAMES (1 << 0) +#define MT9T001_READ_MODE_LINE_VALID_CONTINUOUS (1 << 9) +#define MT9T001_READ_MODE_LINE_VALID_FRAME (1 << 10) +#define MT9T001_READ_MODE3 0x21 +#define MT9T001_READ_MODE_GLOBAL_RESET (1 << 0) +#define MT9T001_READ_MODE_GHST_CTL (1 << 1) +#define MT9T001_ROW_ADDRESS_MODE 0x22 +#define MT9T001_ROW_SKIP_MASK (7 << 0) +#define MT9T001_ROW_BIN_MASK (3 << 3) +#define MT9T001_ROW_BIN_SHIFT 3 +#define MT9T001_COLUMN_ADDRESS_MODE 0x23 +#define MT9T001_COLUMN_SKIP_MASK (7 << 0) +#define MT9T001_COLUMN_BIN_MASK (3 << 3) +#define MT9T001_COLUMN_BIN_SHIFT 3 +#define MT9T001_GREEN1_GAIN 0x2b +#define MT9T001_BLUE_GAIN 0x2c +#define MT9T001_RED_GAIN 0x2d +#define MT9T001_GREEN2_GAIN 0x2e +#define MT9T001_TEST_DATA 0x32 +#define MT9T001_GLOBAL_GAIN 0x35 +#define MT9T001_GLOBAL_GAIN_MIN 8 +#define MT9T001_GLOBAL_GAIN_MAX 1024 +#define MT9T001_BLACK_LEVEL 0x49 +#define MT9T001_ROW_BLACK_DEFAULT_OFFSET 0x4b +#define MT9T001_BLC_DELTA_THRESHOLDS 0x5d +#define MT9T001_CAL_THRESHOLDS 0x5f +#define MT9T001_GREEN1_OFFSET 0x60 +#define MT9T001_GREEN2_OFFSET 0x61 +#define MT9T001_BLACK_LEVEL_CALIBRATION 0x62 +#define MT9T001_BLACK_LEVEL_OVERRIDE (1 << 0) +#define MT9T001_BLACK_LEVEL_DISABLE_OFFSET (1 << 1) +#define MT9T001_BLACK_LEVEL_RECALCULATE (1 << 12) +#define MT9T001_BLACK_LEVEL_LOCK_RED_BLUE (1 << 13) +#define MT9T001_BLACK_LEVEL_LOCK_GREEN (1 << 14) +#define MT9T001_RED_OFFSET 0x63 +#define MT9T001_BLUE_OFFSET 0x64 + +struct mt9t001 { + struct v4l2_subdev subdev; + struct media_pad pad; + + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *gains[4]; + + u16 output_control; + u16 black_level; +}; + +static inline struct mt9t001 *to_mt9t001(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9t001, subdev); +} + +static int mt9t001_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int mt9t001_write(struct i2c_client *client, u8 reg, u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int mt9t001_set_output_control(struct mt9t001 *mt9t001, u16 clear, + u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev); + u16 value = (mt9t001->output_control & ~clear) | set; + int ret; + + if (value == mt9t001->output_control) + return 0; + + ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, value); + if (ret < 0) + return ret; + + mt9t001->output_control = value; + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev video operations + */ + +static struct v4l2_mbus_framefmt * +__mt9t001_get_pad_format(struct mt9t001 *mt9t001, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9t001->format; + default: + return NULL; + } +} + +static struct v4l2_rect * +__mt9t001_get_pad_crop(struct mt9t001 *mt9t001, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9t001->crop; + default: + return NULL; + } +} + +static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable) +{ + const u16 mode = MT9T001_OUTPUT_CONTROL_CHIP_ENABLE; + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + struct v4l2_mbus_framefmt *format = &mt9t001->format; + struct v4l2_rect *crop = &mt9t001->crop; + unsigned int hratio; + unsigned int vratio; + int ret; + + if (!enable) + return mt9t001_set_output_control(mt9t001, mode, 0); + + /* Configure the window size and row/column bin */ + hratio = DIV_ROUND_CLOSEST(crop->width, format->width); + vratio = DIV_ROUND_CLOSEST(crop->height, format->height); + + ret = mt9t001_write(client, MT9T001_ROW_ADDRESS_MODE, hratio - 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_COLUMN_ADDRESS_MODE, vratio - 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_COLUMN_START, crop->left); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_ROW_START, crop->top); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_WINDOW_WIDTH, crop->width - 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_WINDOW_HEIGHT, crop->height - 1); + if (ret < 0) + return ret; + + /* Switch to master "normal" mode */ + return mt9t001_set_output_control(mt9t001, 0, mode); +} + +static int mt9t001_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index > 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_SGRBG10_1X10; + return 0; +} + +static int mt9t001_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index >= 8 || fse->code != V4L2_MBUS_FMT_SGRBG10_1X10) + return -EINVAL; + + fse->min_width = (MT9T001_WINDOW_WIDTH_DEF + 1) / fse->index; + fse->max_width = fse->min_width; + fse->min_height = (MT9T001_WINDOW_HEIGHT_DEF + 1) / fse->index; + fse->max_height = fse->min_height; + + return 0; +} + +static int mt9t001_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + + format->format = *__mt9t001_get_pad_format(mt9t001, fh, format->pad, + format->which); + return 0; +} + +static int mt9t001_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + unsigned int width; + unsigned int height; + unsigned int hratio; + unsigned int vratio; + + __crop = __mt9t001_get_pad_crop(mt9t001, fh, format->pad, + format->which); + + /* Clamp the width and height to avoid dividing by zero. */ + width = clamp_t(unsigned int, ALIGN(format->format.width, 2), + max(__crop->width / 8, MT9T001_WINDOW_HEIGHT_MIN + 1), + __crop->width); + height = clamp_t(unsigned int, ALIGN(format->format.height, 2), + max(__crop->height / 8, MT9T001_WINDOW_HEIGHT_MIN + 1), + __crop->height); + + hratio = DIV_ROUND_CLOSEST(__crop->width, width); + vratio = DIV_ROUND_CLOSEST(__crop->height, height); + + __format = __mt9t001_get_pad_format(mt9t001, fh, format->pad, + format->which); + __format->width = __crop->width / hratio; + __format->height = __crop->height / vratio; + + format->format = *__format; + + return 0; +} + +static int mt9t001_get_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + + crop->rect = *__mt9t001_get_pad_crop(mt9t001, fh, crop->pad, + crop->which); + return 0; +} + +static int mt9t001_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + + /* Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels. + */ + rect.left = clamp(ALIGN(crop->rect.left, 2), + MT9T001_COLUMN_START_MIN, + MT9T001_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top, 2), + MT9T001_ROW_START_MIN, + MT9T001_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), + MT9T001_WINDOW_WIDTH_MIN + 1, + MT9T001_WINDOW_WIDTH_MAX + 1); + rect.height = clamp(ALIGN(crop->rect.height, 2), + MT9T001_WINDOW_HEIGHT_MIN + 1, + MT9T001_WINDOW_HEIGHT_MAX + 1); + + rect.width = min(rect.width, MT9T001_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9T001_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9t001_get_pad_crop(mt9t001, fh, crop->pad, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + __format = __mt9t001_get_pad_format(mt9t001, fh, crop->pad, + crop->which); + __format->width = rect.width; + __format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +#define V4L2_CID_TEST_PATTERN_COLOR (V4L2_CID_USER_BASE | 0x1001) +#define V4L2_CID_BLACK_LEVEL_AUTO (V4L2_CID_USER_BASE | 0x1002) +#define V4L2_CID_BLACK_LEVEL_OFFSET (V4L2_CID_USER_BASE | 0x1003) +#define V4L2_CID_BLACK_LEVEL_CALIBRATE (V4L2_CID_USER_BASE | 0x1004) + +#define V4L2_CID_GAIN_RED (V4L2_CTRL_CLASS_CAMERA | 0x1001) +#define V4L2_CID_GAIN_GREEN_RED (V4L2_CTRL_CLASS_CAMERA | 0x1002) +#define V4L2_CID_GAIN_GREEN_BLUE (V4L2_CTRL_CLASS_CAMERA | 0x1003) +#define V4L2_CID_GAIN_BLUE (V4L2_CTRL_CLASS_CAMERA | 0x1004) + +static u16 mt9t001_gain_value(s32 *gain) +{ + /* Gain is controlled by 2 analog stages and a digital stage. Valid + * values for the 3 stages are + * + * Stage Min Max Step + * ------------------------------------------ + * First analog stage x1 x2 1 + * Second analog stage x1 x4 0.125 + * Digital stage x1 x16 0.125 + * + * To minimize noise, the gain stages should be used in the second + * analog stage, first analog stage, digital stage order. Gain from a + * previous stage should be pushed to its maximum value before the next + * stage is used. + */ + if (*gain <= 32) + return *gain; + + if (*gain <= 64) { + *gain &= ~1; + return (1 << 6) | (*gain >> 1); + } + + *gain &= ~7; + return ((*gain - 64) << 5) | (1 << 6) | 32; +} + +static int mt9t001_ctrl_freeze(struct mt9t001 *mt9t001, bool freeze) +{ + return mt9t001_set_output_control(mt9t001, + freeze ? 0 : MT9T001_OUTPUT_CONTROL_SYNC, + freeze ? MT9T001_OUTPUT_CONTROL_SYNC : 0); +} + +static int mt9t001_s_ctrl(struct v4l2_ctrl *ctrl) +{ + static const u8 gains[4] = { + MT9T001_RED_GAIN, MT9T001_GREEN1_GAIN, + MT9T001_GREEN2_GAIN, MT9T001_BLUE_GAIN + }; + + struct mt9t001 *mt9t001 = + container_of(ctrl->handler, struct mt9t001, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev); + unsigned int count; + unsigned int i; + u16 value; + int ret; + + switch (ctrl->id) { + case V4L2_CID_GAIN_RED: + case V4L2_CID_GAIN_GREEN_RED: + case V4L2_CID_GAIN_GREEN_BLUE: + case V4L2_CID_GAIN_BLUE: + + /* Disable control updates if more than one control has changed + * in the cluster. + */ + for (i = 0, count = 0; i < 4; ++i) { + struct v4l2_ctrl *gain = mt9t001->gains[i]; + + if (gain->val != gain->cur.val) + count++; + } + + if (count > 1) { + ret = mt9t001_ctrl_freeze(mt9t001, true); + if (ret < 0) + return ret; + } + + /* Update the gain controls. */ + for (i = 0; i < 4; ++i) { + struct v4l2_ctrl *gain = mt9t001->gains[i]; + + if (gain->val == gain->cur.val) + continue; + + value = mt9t001_gain_value(&gain->val); + ret = mt9t001_write(client, gains[i], value); + if (ret < 0) { + mt9t001_ctrl_freeze(mt9t001, false); + return ret; + } + } + + /* Enable control updates. */ + if (count > 1) { + ret = mt9t001_ctrl_freeze(mt9t001, false); + if (ret < 0) + return ret; + } + + break; + + case V4L2_CID_EXPOSURE: + ret = mt9t001_write(client, MT9T001_SHUTTER_WIDTH_LOW, + ctrl->val & 0xffff); + if (ret < 0) + return ret; + + return mt9t001_write(client, MT9T001_SHUTTER_WIDTH_HIGH, + ctrl->val >> 16); + + case V4L2_CID_TEST_PATTERN: + return mt9t001_set_output_control(mt9t001, + ctrl->val ? 0 : MT9T001_OUTPUT_CONTROL_TEST_DATA, + ctrl->val ? MT9T001_OUTPUT_CONTROL_TEST_DATA : 0); + + case V4L2_CID_TEST_PATTERN_COLOR: + return mt9t001_write(client, MT9T001_TEST_DATA, ctrl->val << 2); + + case V4L2_CID_BLACK_LEVEL_AUTO: + value = ctrl->val ? 0 : MT9T001_BLACK_LEVEL_OVERRIDE; + ret = mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION, + value); + if (ret < 0) + return ret; + + mt9t001->black_level = value; + break; + + case V4L2_CID_BLACK_LEVEL_OFFSET: + ret = mt9t001_write(client, MT9T001_GREEN1_OFFSET, ctrl->val); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_GREEN2_OFFSET, ctrl->val); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_RED_OFFSET, ctrl->val); + if (ret < 0) + return ret; + + return mt9t001_write(client, MT9T001_BLUE_OFFSET, ctrl->val); + + case V4L2_CID_BLACK_LEVEL_CALIBRATE: + return mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION, + MT9T001_BLACK_LEVEL_RECALCULATE | + mt9t001->black_level); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9t001_ctrl_ops = { + .s_ctrl = mt9t001_s_ctrl, +}; + +static const char * const mt9t001_test_pattern_menu[] = { + "Disabled", + "Enabled", +}; + +static const struct v4l2_ctrl_config mt9t001_ctrls[] = { + { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_TEST_PATTERN_COLOR, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Test Pattern Color", + .min = 0, + .max = 1023, + .step = 1, + .def = 0, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_BLACK_LEVEL_AUTO, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Black Level, Auto", + .min = 0, + .max = 1, + .step = 1, + .def = 1, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_BLACK_LEVEL_OFFSET, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Black Level, Offset", + .min = -256, + .max = 255, + .step = 1, + .def = 32, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_BLACK_LEVEL_CALIBRATE, + .type = V4L2_CTRL_TYPE_BUTTON, + .name = "Black Level, Calibrate", + .min = 0, + .max = 0, + .step = 0, + .def = 0, + .flags = V4L2_CTRL_FLAG_WRITE_ONLY, + }, +}; + +static const struct v4l2_ctrl_config mt9t001_gains[] = { + { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_GAIN_RED, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Red", + .min = MT9T001_GLOBAL_GAIN_MIN, + .max = MT9T001_GLOBAL_GAIN_MAX, + .step = 1, + .def = MT9T001_GLOBAL_GAIN_MIN, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_GAIN_GREEN_RED, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Green (R)", + .min = MT9T001_GLOBAL_GAIN_MIN, + .max = MT9T001_GLOBAL_GAIN_MAX, + .step = 1, + .def = MT9T001_GLOBAL_GAIN_MIN, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_GAIN_GREEN_BLUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Green (B)", + .min = MT9T001_GLOBAL_GAIN_MIN, + .max = MT9T001_GLOBAL_GAIN_MAX, + .step = 1, + .def = MT9T001_GLOBAL_GAIN_MIN, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_GAIN_BLUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Blue", + .min = MT9T001_GLOBAL_GAIN_MIN, + .max = MT9T001_GLOBAL_GAIN_MAX, + .step = 1, + .def = MT9T001_GLOBAL_GAIN_MIN, + .flags = 0, + }, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev internal operations + */ + +static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + crop = v4l2_subdev_get_try_crop(fh, 0); + crop->left = MT9T001_COLUMN_START_DEF; + crop->top = MT9T001_ROW_START_DEF; + crop->width = MT9T001_WINDOW_WIDTH_DEF + 1; + crop->height = MT9T001_WINDOW_HEIGHT_DEF + 1; + + format = v4l2_subdev_get_try_format(fh, 0); + format->code = V4L2_MBUS_FMT_SGRBG10_1X10; + format->width = MT9T001_WINDOW_WIDTH_DEF + 1; + format->height = MT9T001_WINDOW_HEIGHT_DEF + 1; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static struct v4l2_subdev_video_ops mt9t001_subdev_video_ops = { + .s_stream = mt9t001_s_stream, +}; + +static struct v4l2_subdev_pad_ops mt9t001_subdev_pad_ops = { + .enum_mbus_code = mt9t001_enum_mbus_code, + .enum_frame_size = mt9t001_enum_frame_size, + .get_fmt = mt9t001_get_format, + .set_fmt = mt9t001_set_format, + .get_crop = mt9t001_get_crop, + .set_crop = mt9t001_set_crop, +}; + +static struct v4l2_subdev_ops mt9t001_subdev_ops = { + .video = &mt9t001_subdev_video_ops, + .pad = &mt9t001_subdev_pad_ops, +}; + +static struct v4l2_subdev_internal_ops mt9t001_subdev_internal_ops = { + .open = mt9t001_open, +}; + +static int mt9t001_video_probe(struct i2c_client *client) +{ + struct mt9t001_platform_data *pdata = client->dev.platform_data; + s32 data; + int ret; + + dev_info(&client->dev, "Probing MT9T001 at address 0x%02x\n", + client->addr); + + /* Reset the chip and stop data read out */ + ret = mt9t001_write(client, MT9T001_RESET, 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_RESET, 0); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, 0); + if (ret < 0) + return ret; + + /* Configure the pixel clock polarity */ + if (pdata->clk_pol) { + ret = mt9t001_write(client, MT9T001_PIXEL_CLOCK, + MT9T001_PIXEL_CLOCK_INVERT); + if (ret < 0) + return ret; + } + + /* Read and check the sensor version */ + data = mt9t001_read(client, MT9T001_CHIP_VERSION); + if (data != MT9T001_CHIP_ID) { + dev_err(&client->dev, "MT9T001 not detected, wrong version " + "0x%04x\n", data); + return -ENODEV; + } + + dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n", + client->addr); + + return ret; +} + +static int mt9t001_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9t001_platform_data *pdata = client->dev.platform_data; + struct mt9t001 *mt9t001; + unsigned int i; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + ret = mt9t001_video_probe(client); + if (ret < 0) + return ret; + + mt9t001 = kzalloc(sizeof(*mt9t001), GFP_KERNEL); + if (!mt9t001) + return -ENOMEM; + + v4l2_ctrl_handler_init(&mt9t001->ctrls, ARRAY_SIZE(mt9t001_ctrls) + + ARRAY_SIZE(mt9t001_gains) + 4); + + v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops, + V4L2_CID_EXPOSURE, MT9T001_SHUTTER_WIDTH_MIN, + MT9T001_SHUTTER_WIDTH_MAX, 1, + MT9T001_SHUTTER_WIDTH_DEF); + v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops, + V4L2_CID_BLACK_LEVEL, 1, 1, 1, 1); + v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops, + V4L2_CID_PIXEL_RATE, pdata->ext_clk, pdata->ext_clk, + 1, pdata->ext_clk); + v4l2_ctrl_new_std_menu_items(&mt9t001->ctrls, &mt9t001_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(mt9t001_test_pattern_menu) - 1, 0, + 0, mt9t001_test_pattern_menu); + + for (i = 0; i < ARRAY_SIZE(mt9t001_ctrls); ++i) + v4l2_ctrl_new_custom(&mt9t001->ctrls, &mt9t001_ctrls[i], NULL); + + for (i = 0; i < ARRAY_SIZE(mt9t001_gains); ++i) + mt9t001->gains[i] = v4l2_ctrl_new_custom(&mt9t001->ctrls, + &mt9t001_gains[i], NULL); + + v4l2_ctrl_cluster(ARRAY_SIZE(mt9t001_gains), mt9t001->gains); + + mt9t001->subdev.ctrl_handler = &mt9t001->ctrls; + + if (mt9t001->ctrls.error) { + printk(KERN_INFO "%s: control initialization error %d\n", + __func__, mt9t001->ctrls.error); + ret = -EINVAL; + goto done; + } + + mt9t001->crop.left = MT9T001_COLUMN_START_DEF; + mt9t001->crop.top = MT9T001_ROW_START_DEF; + mt9t001->crop.width = MT9T001_WINDOW_WIDTH_DEF + 1; + mt9t001->crop.height = MT9T001_WINDOW_HEIGHT_DEF + 1; + + mt9t001->format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + mt9t001->format.width = MT9T001_WINDOW_WIDTH_DEF + 1; + mt9t001->format.height = MT9T001_WINDOW_HEIGHT_DEF + 1; + mt9t001->format.field = V4L2_FIELD_NONE; + mt9t001->format.colorspace = V4L2_COLORSPACE_SRGB; + + v4l2_i2c_subdev_init(&mt9t001->subdev, client, &mt9t001_subdev_ops); + mt9t001->subdev.internal_ops = &mt9t001_subdev_internal_ops; + mt9t001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + mt9t001->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&mt9t001->subdev.entity, 1, &mt9t001->pad, 0); + +done: + if (ret < 0) { + v4l2_ctrl_handler_free(&mt9t001->ctrls); + media_entity_cleanup(&mt9t001->subdev.entity); + kfree(mt9t001); + } + + return ret; +} + +static int mt9t001_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + + v4l2_ctrl_handler_free(&mt9t001->ctrls); + v4l2_device_unregister_subdev(subdev); + media_entity_cleanup(&subdev->entity); + kfree(mt9t001); + return 0; +} + +static const struct i2c_device_id mt9t001_id[] = { + { "mt9t001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9t001_id); + +static struct i2c_driver mt9t001_driver = { + .driver = { + .name = "mt9t001", + }, + .probe = mt9t001_probe, + .remove = mt9t001_remove, + .id_table = mt9t001_id, +}; + +module_i2c_driver(mt9t001_driver); + +MODULE_DESCRIPTION("Aptina (Micron) MT9T001 Camera driver"); +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/mt9v011.c b/drivers/media/i2c/mt9v011.c new file mode 100644 index 00000000..3f415fd1 --- /dev/null +++ b/drivers/media/i2c/mt9v011.c @@ -0,0 +1,623 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab "); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8232 +#define MT9V011_REV_B_VERSION 0x8243 + +struct mt9v011 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler ctrls; + unsigned width, height; + unsigned xtal; + unsigned hflip:1; + unsigned vflip:1; + + u16 global_gain, exposure; + s16 red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + + { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */ +}; + + +static u16 calc_mt9v011_gain(s16 lineargain) +{ + + u16 digitalgain = 0; + u16 analogmult = 0; + u16 analoginit = 0; + + if (lineargain < 0) + lineargain = 0; + + /* recommended minimum */ + lineargain += 0x0020; + + if (lineargain > 2047) + lineargain = 2047; + + if (lineargain > 1023) { + digitalgain = 3; + analogmult = 3; + analoginit = lineargain / 16; + } else if (lineargain > 511) { + digitalgain = 1; + analogmult = 3; + analoginit = lineargain / 8; + } else if (lineargain > 255) { + analogmult = 3; + analoginit = lineargain / 4; + } else if (lineargain > 127) { + analogmult = 1; + analoginit = lineargain / 2; + } else + analoginit = lineargain; + + return analoginit + (analogmult << 7) + (digitalgain << 9); + +} + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green_gain, blue_gain, red_gain; + u16 exposure; + s16 bal; + + exposure = core->exposure; + + green_gain = calc_mt9v011_gain(core->global_gain); + + bal = core->global_gain; + bal += (core->blue_bal * core->global_gain / (1 << 7)); + blue_gain = calc_mt9v011_gain(bal); + + bal = core->global_gain; + bal += (core->red_bal * core->global_gain / (1 << 7)); + red_gain = calc_mt9v011_gain(bal); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); + mt9v011_write(sd, R09_MT9V011_SHUTTER_WIDTH, exposure); +} + +static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned height, width, hblank, vblank, speed; + unsigned row_time, t_time; + u64 frames_per_ms; + unsigned tmp; + + height = mt9v011_read(sd, R03_MT9V011_HEIGHT); + width = mt9v011_read(sd, R04_MT9V011_WIDTH); + hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); + vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); + speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED); + + row_time = (width + 113 + hblank) * (speed + 2); + t_time = row_time * (height + vblank + 1); + + frames_per_ms = core->xtal * 1000l; + do_div(frames_per_ms, t_time); + tmp = frames_per_ms; + + v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n", + tmp / 1000, tmp % 1000, t_time); + + if (numerator && denominator) { + *numerator = 1000; + *denominator = (u32)frames_per_ms; + } +} + +static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned height, width, hblank, vblank; + unsigned row_time, line_time; + u64 t_time, speed; + + /* Avoid bogus calculus */ + if (!numerator || !denominator) + return 0; + + height = mt9v011_read(sd, R03_MT9V011_HEIGHT); + width = mt9v011_read(sd, R04_MT9V011_WIDTH); + hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); + vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); + + row_time = width + 113 + hblank; + line_time = height + vblank + 1; + + t_time = core->xtal * ((u64)numerator); + /* round to the closest value */ + t_time += denominator / 2; + do_div(t_time, denominator); + + speed = t_time; + do_div(speed, row_time * line_time); + + /* Avoid having a negative value for speed */ + if (speed < 2) + speed = 0; + else + speed -= 2; + + /* Avoid speed overflow */ + if (speed > 15) + return 15; + + return (u16)speed; +} + +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. + */ + + hstart = 20 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (480 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); + + calc_fps(sd, NULL, NULL); +}; + +static void set_read_mode(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned mode = 0x1000; + + if (core->hflip) + mode |= 0x4000; + + if (core->vflip) + mode |= 0x8000; + + mt9v011_write(sd, R20_MT9V011_READ_MODE, mode); +} + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + set_res(sd); + set_read_mode(sd); + + return 0; +} + +static int mt9v011_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index > 0) + return -EINVAL; + + *code = V4L2_MBUS_FMT_SGRBG8_1X8; + return 0; +} + +static int mt9v011_try_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + if (fmt->code != V4L2_MBUS_FMT_SGRBG8_1X8) + return -EINVAL; + + v4l_bound_align_image(&fmt->width, 48, 639, 1, + &fmt->height, 32, 480, 1, 0); + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(struct v4l2_captureparm)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + calc_fps(sd, + &cp->timeperframe.numerator, + &cp->timeperframe.denominator); + + return 0; +} + +static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + u16 speed; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + speed = calc_speed(sd, tpf->numerator, tpf->denominator); + + mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed); + v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed); + + /* Recalculate and update fps info */ + calc_fps(sd, &tpf->numerator, &tpf->denominator); + + return 0; +} + +static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_mbus_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = fmt->width; + core->height = fmt->height; + + set_res(sd); + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + u16 version; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + version); +} + +static int mt9v011_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9v011 *core = + container_of(ctrl->handler, struct mt9v011, ctrls); + struct v4l2_subdev *sd = &core->sd; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->val; + break; + case V4L2_CID_EXPOSURE: + core->exposure = ctrl->val; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->val; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->val; + break; + case V4L2_CID_HFLIP: + core->hflip = ctrl->val; + set_read_mode(sd); + return 0; + case V4L2_CID_VFLIP: + core->vflip = ctrl->val; + set_read_mode(sd); + return 0; + default: + return -EINVAL; + } + + set_balance(sd); + return 0; +} + +static struct v4l2_ctrl_ops mt9v011_ctrl_ops = { + .s_ctrl = mt9v011_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .reset = mt9v011_reset, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_mbus_fmt = mt9v011_enum_mbus_fmt, + .try_mbus_fmt = mt9v011_try_mbus_fmt, + .s_mbus_fmt = mt9v011_s_mbus_fmt, + .g_parm = mt9v011_g_parm, + .s_parm = mt9v011_s_parm, +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + u16 version; + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if ((version != MT9V011_VERSION) && + (version != MT9V011_REV_B_VERSION)) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n", + version); + kfree(core); + return -EINVAL; + } + + v4l2_ctrl_handler_init(&core->ctrls, 5); + v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, + V4L2_CID_GAIN, 0, (1 << 12) - 1 - 0x20, 1, 0x20); + v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, + V4L2_CID_EXPOSURE, 0, 2047, 1, 0x01fc); + v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, + V4L2_CID_RED_BALANCE, -(1 << 9), (1 << 9) - 1, 1, 0); + v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, + V4L2_CID_BLUE_BALANCE, -(1 << 9), (1 << 9) - 1, 1, 0); + v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + if (core->ctrls.error) { + int ret = core->ctrls.error; + + v4l2_err(sd, "control initialization error %d\n", ret); + v4l2_ctrl_handler_free(&core->ctrls); + kfree(core); + return ret; + } + core->sd.ctrl_handler = &core->ctrls; + + core->global_gain = 0x0024; + core->exposure = 0x01fc; + core->width = 640; + core->height = 480; + core->xtal = 27000000; /* Hz */ + + if (c->dev.platform_data) { + struct mt9v011_platform_data *pdata = c->dev.platform_data; + + core->xtal = pdata->xtal; + v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", + core->xtal / 1000000, (core->xtal / 1000) % 1000); + } + + v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n", + c->addr << 1, c->adapter->name, version); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&core->ctrls); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +static struct i2c_driver mt9v011_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "mt9v011", + }, + .probe = mt9v011_probe, + .remove = mt9v011_remove, + .id_table = mt9v011_id, +}; + +module_i2c_driver(mt9v011_driver); diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c new file mode 100644 index 00000000..3f356cb2 --- /dev/null +++ b/drivers/media/i2c/mt9v032.c @@ -0,0 +1,869 @@ +/* + * Driver for MT9V032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010, Laurent Pinchart + * + * Based on the MT9M001 driver, + * + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define MT9V032_PIXEL_ARRAY_HEIGHT 492 +#define MT9V032_PIXEL_ARRAY_WIDTH 782 + +#define MT9V032_SYSCLK_FREQ_DEF 26600000 + +#define MT9V032_CHIP_VERSION 0x00 +#define MT9V032_CHIP_ID_REV1 0x1311 +#define MT9V032_CHIP_ID_REV3 0x1313 +#define MT9V032_COLUMN_START 0x01 +#define MT9V032_COLUMN_START_MIN 1 +#define MT9V032_COLUMN_START_DEF 1 +#define MT9V032_COLUMN_START_MAX 752 +#define MT9V032_ROW_START 0x02 +#define MT9V032_ROW_START_MIN 4 +#define MT9V032_ROW_START_DEF 5 +#define MT9V032_ROW_START_MAX 482 +#define MT9V032_WINDOW_HEIGHT 0x03 +#define MT9V032_WINDOW_HEIGHT_MIN 1 +#define MT9V032_WINDOW_HEIGHT_DEF 480 +#define MT9V032_WINDOW_HEIGHT_MAX 480 +#define MT9V032_WINDOW_WIDTH 0x04 +#define MT9V032_WINDOW_WIDTH_MIN 1 +#define MT9V032_WINDOW_WIDTH_DEF 752 +#define MT9V032_WINDOW_WIDTH_MAX 752 +#define MT9V032_HORIZONTAL_BLANKING 0x05 +#define MT9V032_HORIZONTAL_BLANKING_MIN 43 +#define MT9V032_HORIZONTAL_BLANKING_DEF 94 +#define MT9V032_HORIZONTAL_BLANKING_MAX 1023 +#define MT9V032_VERTICAL_BLANKING 0x06 +#define MT9V032_VERTICAL_BLANKING_MIN 4 +#define MT9V032_VERTICAL_BLANKING_DEF 45 +#define MT9V032_VERTICAL_BLANKING_MAX 3000 +#define MT9V032_CHIP_CONTROL 0x07 +#define MT9V032_CHIP_CONTROL_MASTER_MODE (1 << 3) +#define MT9V032_CHIP_CONTROL_DOUT_ENABLE (1 << 7) +#define MT9V032_CHIP_CONTROL_SEQUENTIAL (1 << 8) +#define MT9V032_SHUTTER_WIDTH1 0x08 +#define MT9V032_SHUTTER_WIDTH2 0x09 +#define MT9V032_SHUTTER_WIDTH_CONTROL 0x0a +#define MT9V032_TOTAL_SHUTTER_WIDTH 0x0b +#define MT9V032_TOTAL_SHUTTER_WIDTH_MIN 1 +#define MT9V032_TOTAL_SHUTTER_WIDTH_DEF 480 +#define MT9V032_TOTAL_SHUTTER_WIDTH_MAX 32767 +#define MT9V032_RESET 0x0c +#define MT9V032_READ_MODE 0x0d +#define MT9V032_READ_MODE_ROW_BIN_MASK (3 << 0) +#define MT9V032_READ_MODE_ROW_BIN_SHIFT 0 +#define MT9V032_READ_MODE_COLUMN_BIN_MASK (3 << 2) +#define MT9V032_READ_MODE_COLUMN_BIN_SHIFT 2 +#define MT9V032_READ_MODE_ROW_FLIP (1 << 4) +#define MT9V032_READ_MODE_COLUMN_FLIP (1 << 5) +#define MT9V032_READ_MODE_DARK_COLUMNS (1 << 6) +#define MT9V032_READ_MODE_DARK_ROWS (1 << 7) +#define MT9V032_PIXEL_OPERATION_MODE 0x0f +#define MT9V032_PIXEL_OPERATION_MODE_COLOR (1 << 2) +#define MT9V032_PIXEL_OPERATION_MODE_HDR (1 << 6) +#define MT9V032_ANALOG_GAIN 0x35 +#define MT9V032_ANALOG_GAIN_MIN 16 +#define MT9V032_ANALOG_GAIN_DEF 16 +#define MT9V032_ANALOG_GAIN_MAX 64 +#define MT9V032_MAX_ANALOG_GAIN 0x36 +#define MT9V032_MAX_ANALOG_GAIN_MAX 127 +#define MT9V032_FRAME_DARK_AVERAGE 0x42 +#define MT9V032_DARK_AVG_THRESH 0x46 +#define MT9V032_DARK_AVG_LOW_THRESH_MASK (255 << 0) +#define MT9V032_DARK_AVG_LOW_THRESH_SHIFT 0 +#define MT9V032_DARK_AVG_HIGH_THRESH_MASK (255 << 8) +#define MT9V032_DARK_AVG_HIGH_THRESH_SHIFT 8 +#define MT9V032_ROW_NOISE_CORR_CONTROL 0x70 +#define MT9V032_ROW_NOISE_CORR_ENABLE (1 << 5) +#define MT9V032_ROW_NOISE_CORR_USE_BLK_AVG (1 << 7) +#define MT9V032_PIXEL_CLOCK 0x74 +#define MT9V032_PIXEL_CLOCK_INV_LINE (1 << 0) +#define MT9V032_PIXEL_CLOCK_INV_FRAME (1 << 1) +#define MT9V032_PIXEL_CLOCK_XOR_LINE (1 << 2) +#define MT9V032_PIXEL_CLOCK_CONT_LINE (1 << 3) +#define MT9V032_PIXEL_CLOCK_INV_PXL_CLK (1 << 4) +#define MT9V032_TEST_PATTERN 0x7f +#define MT9V032_TEST_PATTERN_DATA_MASK (1023 << 0) +#define MT9V032_TEST_PATTERN_DATA_SHIFT 0 +#define MT9V032_TEST_PATTERN_USE_DATA (1 << 10) +#define MT9V032_TEST_PATTERN_GRAY_MASK (3 << 11) +#define MT9V032_TEST_PATTERN_GRAY_NONE (0 << 11) +#define MT9V032_TEST_PATTERN_GRAY_VERTICAL (1 << 11) +#define MT9V032_TEST_PATTERN_GRAY_HORIZONTAL (2 << 11) +#define MT9V032_TEST_PATTERN_GRAY_DIAGONAL (3 << 11) +#define MT9V032_TEST_PATTERN_ENABLE (1 << 13) +#define MT9V032_TEST_PATTERN_FLIP (1 << 14) +#define MT9V032_AEC_AGC_ENABLE 0xaf +#define MT9V032_AEC_ENABLE (1 << 0) +#define MT9V032_AGC_ENABLE (1 << 1) +#define MT9V032_THERMAL_INFO 0xc1 + +struct mt9v032 { + struct v4l2_subdev subdev; + struct media_pad pad; + + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + + struct v4l2_ctrl_handler ctrls; + struct { + struct v4l2_ctrl *link_freq; + struct v4l2_ctrl *pixel_rate; + }; + + struct mutex power_lock; + int power_count; + + struct mt9v032_platform_data *pdata; + + u32 sysclk; + u16 chip_control; + u16 aec_agc; + u16 hblank; + struct { + struct v4l2_ctrl *test_pattern; + struct v4l2_ctrl *test_pattern_color; + }; +}; + +static struct mt9v032 *to_mt9v032(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v032, subdev); +} + +static int mt9v032_read(struct i2c_client *client, const u8 reg) +{ + s32 data = i2c_smbus_read_word_swapped(client, reg); + dev_dbg(&client->dev, "%s: read 0x%04x from 0x%02x\n", __func__, + data, reg); + return data; +} + +static int mt9v032_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + dev_dbg(&client->dev, "%s: writing 0x%04x to 0x%02x\n", __func__, + data, reg); + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int mt9v032_set_chip_control(struct mt9v032 *mt9v032, u16 clear, u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + u16 value = (mt9v032->chip_control & ~clear) | set; + int ret; + + ret = mt9v032_write(client, MT9V032_CHIP_CONTROL, value); + if (ret < 0) + return ret; + + mt9v032->chip_control = value; + return 0; +} + +static int +mt9v032_update_aec_agc(struct mt9v032 *mt9v032, u16 which, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + u16 value = mt9v032->aec_agc; + int ret; + + if (enable) + value |= which; + else + value &= ~which; + + ret = mt9v032_write(client, MT9V032_AEC_AGC_ENABLE, value); + if (ret < 0) + return ret; + + mt9v032->aec_agc = value; + return 0; +} + +static int +mt9v032_update_hblank(struct mt9v032 *mt9v032) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + struct v4l2_rect *crop = &mt9v032->crop; + + return mt9v032_write(client, MT9V032_HORIZONTAL_BLANKING, + max_t(s32, mt9v032->hblank, 660 - crop->width)); +} + +#define EXT_CLK 25000000 + +static int mt9v032_power_on(struct mt9v032 *mt9v032) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + int ret; + + if (mt9v032->pdata->set_clock) { + mt9v032->pdata->set_clock(&mt9v032->subdev, mt9v032->sysclk); + udelay(1); + } + + /* Reset the chip and stop data read out */ + ret = mt9v032_write(client, MT9V032_RESET, 1); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_RESET, 0); + if (ret < 0) + return ret; + + return mt9v032_write(client, MT9V032_CHIP_CONTROL, 0); +} + +static void mt9v032_power_off(struct mt9v032 *mt9v032) +{ + if (mt9v032->pdata->set_clock) + mt9v032->pdata->set_clock(&mt9v032->subdev, 0); +} + +static int __mt9v032_set_power(struct mt9v032 *mt9v032, bool on) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + int ret; + + if (!on) { + mt9v032_power_off(mt9v032); + return 0; + } + + ret = mt9v032_power_on(mt9v032); + if (ret < 0) + return ret; + + /* Configure the pixel clock polarity */ + if (mt9v032->pdata && mt9v032->pdata->clk_pol) { + ret = mt9v032_write(client, MT9V032_PIXEL_CLOCK, + MT9V032_PIXEL_CLOCK_INV_PXL_CLK); + if (ret < 0) + return ret; + } + + /* Disable the noise correction algorithm and restore the controls. */ + ret = mt9v032_write(client, MT9V032_ROW_NOISE_CORR_CONTROL, 0); + if (ret < 0) + return ret; + + return v4l2_ctrl_handler_setup(&mt9v032->ctrls); +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev video operations + */ + +static struct v4l2_mbus_framefmt * +__mt9v032_get_pad_format(struct mt9v032 *mt9v032, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9v032->format; + default: + return NULL; + } +} + +static struct v4l2_rect * +__mt9v032_get_pad_crop(struct mt9v032 *mt9v032, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9v032->crop; + default: + return NULL; + } +} + +static int mt9v032_s_stream(struct v4l2_subdev *subdev, int enable) +{ + const u16 mode = MT9V032_CHIP_CONTROL_MASTER_MODE + | MT9V032_CHIP_CONTROL_DOUT_ENABLE + | MT9V032_CHIP_CONTROL_SEQUENTIAL; + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + struct v4l2_mbus_framefmt *format = &mt9v032->format; + struct v4l2_rect *crop = &mt9v032->crop; + unsigned int hratio; + unsigned int vratio; + int ret; + + if (!enable) + return mt9v032_set_chip_control(mt9v032, mode, 0); + + /* Configure the window size and row/column bin */ + hratio = DIV_ROUND_CLOSEST(crop->width, format->width); + vratio = DIV_ROUND_CLOSEST(crop->height, format->height); + + ret = mt9v032_write(client, MT9V032_READ_MODE, + (hratio - 1) << MT9V032_READ_MODE_ROW_BIN_SHIFT | + (vratio - 1) << MT9V032_READ_MODE_COLUMN_BIN_SHIFT); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_COLUMN_START, crop->left); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_ROW_START, crop->top); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_WINDOW_WIDTH, crop->width); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_WINDOW_HEIGHT, crop->height); + if (ret < 0) + return ret; + + ret = mt9v032_update_hblank(mt9v032); + if (ret < 0) + return ret; + + /* Switch to master "normal" mode */ + return mt9v032_set_chip_control(mt9v032, 0, mode); +} + +static int mt9v032_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index > 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_SGRBG10_1X10; + return 0; +} + +static int mt9v032_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index >= 8 || fse->code != V4L2_MBUS_FMT_SGRBG10_1X10) + return -EINVAL; + + fse->min_width = MT9V032_WINDOW_WIDTH_DEF / fse->index; + fse->max_width = fse->min_width; + fse->min_height = MT9V032_WINDOW_HEIGHT_DEF / fse->index; + fse->max_height = fse->min_height; + + return 0; +} + +static int mt9v032_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + + format->format = *__mt9v032_get_pad_format(mt9v032, fh, format->pad, + format->which); + return 0; +} + +static void mt9v032_configure_pixel_rate(struct mt9v032 *mt9v032, + unsigned int hratio) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + int ret; + + ret = v4l2_ctrl_s_ctrl_int64(mt9v032->pixel_rate, + mt9v032->sysclk / hratio); + if (ret < 0) + dev_warn(&client->dev, "failed to set pixel rate (%d)\n", ret); +} + +static int mt9v032_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + unsigned int width; + unsigned int height; + unsigned int hratio; + unsigned int vratio; + + __crop = __mt9v032_get_pad_crop(mt9v032, fh, format->pad, + format->which); + + /* Clamp the width and height to avoid dividing by zero. */ + width = clamp_t(unsigned int, ALIGN(format->format.width, 2), + max(__crop->width / 8, MT9V032_WINDOW_WIDTH_MIN), + __crop->width); + height = clamp_t(unsigned int, ALIGN(format->format.height, 2), + max(__crop->height / 8, MT9V032_WINDOW_HEIGHT_MIN), + __crop->height); + + hratio = DIV_ROUND_CLOSEST(__crop->width, width); + vratio = DIV_ROUND_CLOSEST(__crop->height, height); + + __format = __mt9v032_get_pad_format(mt9v032, fh, format->pad, + format->which); + __format->width = __crop->width / hratio; + __format->height = __crop->height / vratio; + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + mt9v032_configure_pixel_rate(mt9v032, hratio); + + format->format = *__format; + + return 0; +} + +static int mt9v032_get_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + + crop->rect = *__mt9v032_get_pad_crop(mt9v032, fh, crop->pad, + crop->which); + return 0; +} + +static int mt9v032_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + + /* Clamp the crop rectangle boundaries and align them to a non multiple + * of 2 pixels to ensure a GRBG Bayer pattern. + */ + rect.left = clamp(ALIGN(crop->rect.left + 1, 2) - 1, + MT9V032_COLUMN_START_MIN, + MT9V032_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top + 1, 2) - 1, + MT9V032_ROW_START_MIN, + MT9V032_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), + MT9V032_WINDOW_WIDTH_MIN, + MT9V032_WINDOW_WIDTH_MAX); + rect.height = clamp(ALIGN(crop->rect.height, 2), + MT9V032_WINDOW_HEIGHT_MIN, + MT9V032_WINDOW_HEIGHT_MAX); + + rect.width = min(rect.width, MT9V032_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9V032_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9v032_get_pad_crop(mt9v032, fh, crop->pad, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + __format = __mt9v032_get_pad_format(mt9v032, fh, crop->pad, + crop->which); + __format->width = rect.width; + __format->height = rect.height; + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) + mt9v032_configure_pixel_rate(mt9v032, 1); + } + + *__crop = rect; + crop->rect = rect; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +#define V4L2_CID_TEST_PATTERN_COLOR (V4L2_CID_USER_BASE | 0x1001) + +static int mt9v032_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9v032 *mt9v032 = + container_of(ctrl->handler, struct mt9v032, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + u32 freq; + u16 data; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + return mt9v032_update_aec_agc(mt9v032, MT9V032_AGC_ENABLE, + ctrl->val); + + case V4L2_CID_GAIN: + return mt9v032_write(client, MT9V032_ANALOG_GAIN, ctrl->val); + + case V4L2_CID_EXPOSURE_AUTO: + return mt9v032_update_aec_agc(mt9v032, MT9V032_AEC_ENABLE, + !ctrl->val); + + case V4L2_CID_EXPOSURE: + return mt9v032_write(client, MT9V032_TOTAL_SHUTTER_WIDTH, + ctrl->val); + + case V4L2_CID_HBLANK: + mt9v032->hblank = ctrl->val; + return mt9v032_update_hblank(mt9v032); + + case V4L2_CID_VBLANK: + return mt9v032_write(client, MT9V032_VERTICAL_BLANKING, + ctrl->val); + + case V4L2_CID_PIXEL_RATE: + case V4L2_CID_LINK_FREQ: + if (mt9v032->link_freq == NULL) + break; + + freq = mt9v032->pdata->link_freqs[mt9v032->link_freq->val]; + mt9v032->pixel_rate->val64 = freq; + mt9v032->sysclk = freq; + break; + + case V4L2_CID_TEST_PATTERN: + switch (mt9v032->test_pattern->val) { + case 0: + data = 0; + break; + case 1: + data = MT9V032_TEST_PATTERN_GRAY_VERTICAL + | MT9V032_TEST_PATTERN_ENABLE; + break; + case 2: + data = MT9V032_TEST_PATTERN_GRAY_HORIZONTAL + | MT9V032_TEST_PATTERN_ENABLE; + break; + case 3: + data = MT9V032_TEST_PATTERN_GRAY_DIAGONAL + | MT9V032_TEST_PATTERN_ENABLE; + break; + default: + data = (mt9v032->test_pattern_color->val << + MT9V032_TEST_PATTERN_DATA_SHIFT) + | MT9V032_TEST_PATTERN_USE_DATA + | MT9V032_TEST_PATTERN_ENABLE + | MT9V032_TEST_PATTERN_FLIP; + break; + } + return mt9v032_write(client, MT9V032_TEST_PATTERN, data); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9v032_ctrl_ops = { + .s_ctrl = mt9v032_s_ctrl, +}; + +static const char * const mt9v032_test_pattern_menu[] = { + "Disabled", + "Gray Vertical Shade", + "Gray Horizontal Shade", + "Gray Diagonal Shade", + "Plain", +}; + +static const struct v4l2_ctrl_config mt9v032_test_pattern_color = { + .ops = &mt9v032_ctrl_ops, + .id = V4L2_CID_TEST_PATTERN_COLOR, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Test Pattern Color", + .min = 0, + .max = 1023, + .step = 1, + .def = 0, + .flags = 0, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +static int mt9v032_set_power(struct v4l2_subdev *subdev, int on) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + int ret = 0; + + mutex_lock(&mt9v032->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (mt9v032->power_count == !on) { + ret = __mt9v032_set_power(mt9v032, !!on); + if (ret < 0) + goto done; + } + + /* Update the power count. */ + mt9v032->power_count += on ? 1 : -1; + WARN_ON(mt9v032->power_count < 0); + +done: + mutex_unlock(&mt9v032->power_lock); + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev internal operations + */ + +static int mt9v032_registered(struct v4l2_subdev *subdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + s32 data; + int ret; + + dev_info(&client->dev, "Probing MT9V032 at address 0x%02x\n", + client->addr); + + ret = mt9v032_power_on(mt9v032); + if (ret < 0) { + dev_err(&client->dev, "MT9V032 power up failed\n"); + return ret; + } + + /* Read and check the sensor version */ + data = mt9v032_read(client, MT9V032_CHIP_VERSION); + if (data != MT9V032_CHIP_ID_REV1 && data != MT9V032_CHIP_ID_REV3) { + dev_err(&client->dev, "MT9V032 not detected, wrong version " + "0x%04x\n", data); + return -ENODEV; + } + + mt9v032_power_off(mt9v032); + + dev_info(&client->dev, "MT9V032 detected at address 0x%02x\n", + client->addr); + + mt9v032_configure_pixel_rate(mt9v032, 1); + + return ret; +} + +static int mt9v032_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + crop = v4l2_subdev_get_try_crop(fh, 0); + crop->left = MT9V032_COLUMN_START_DEF; + crop->top = MT9V032_ROW_START_DEF; + crop->width = MT9V032_WINDOW_WIDTH_DEF; + crop->height = MT9V032_WINDOW_HEIGHT_DEF; + + format = v4l2_subdev_get_try_format(fh, 0); + format->code = V4L2_MBUS_FMT_SGRBG10_1X10; + format->width = MT9V032_WINDOW_WIDTH_DEF; + format->height = MT9V032_WINDOW_HEIGHT_DEF; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + return mt9v032_set_power(subdev, 1); +} + +static int mt9v032_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + return mt9v032_set_power(subdev, 0); +} + +static struct v4l2_subdev_core_ops mt9v032_subdev_core_ops = { + .s_power = mt9v032_set_power, +}; + +static struct v4l2_subdev_video_ops mt9v032_subdev_video_ops = { + .s_stream = mt9v032_s_stream, +}; + +static struct v4l2_subdev_pad_ops mt9v032_subdev_pad_ops = { + .enum_mbus_code = mt9v032_enum_mbus_code, + .enum_frame_size = mt9v032_enum_frame_size, + .get_fmt = mt9v032_get_format, + .set_fmt = mt9v032_set_format, + .get_crop = mt9v032_get_crop, + .set_crop = mt9v032_set_crop, +}; + +static struct v4l2_subdev_ops mt9v032_subdev_ops = { + .core = &mt9v032_subdev_core_ops, + .video = &mt9v032_subdev_video_ops, + .pad = &mt9v032_subdev_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops mt9v032_subdev_internal_ops = { + .registered = mt9v032_registered, + .open = mt9v032_open, + .close = mt9v032_close, +}; + +/* ----------------------------------------------------------------------------- + * Driver initialization and probing + */ + +static int mt9v032_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9v032_platform_data *pdata = client->dev.platform_data; + struct mt9v032 *mt9v032; + unsigned int i; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9v032 = kzalloc(sizeof(*mt9v032), GFP_KERNEL); + if (!mt9v032) + return -ENOMEM; + + mutex_init(&mt9v032->power_lock); + mt9v032->pdata = pdata; + + v4l2_ctrl_handler_init(&mt9v032->ctrls, 10); + + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_GAIN, MT9V032_ANALOG_GAIN_MIN, + MT9V032_ANALOG_GAIN_MAX, 1, MT9V032_ANALOG_GAIN_DEF); + v4l2_ctrl_new_std_menu(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, 0, + V4L2_EXPOSURE_AUTO); + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_EXPOSURE, MT9V032_TOTAL_SHUTTER_WIDTH_MIN, + MT9V032_TOTAL_SHUTTER_WIDTH_MAX, 1, + MT9V032_TOTAL_SHUTTER_WIDTH_DEF); + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_HBLANK, MT9V032_HORIZONTAL_BLANKING_MIN, + MT9V032_HORIZONTAL_BLANKING_MAX, 1, + MT9V032_HORIZONTAL_BLANKING_DEF); + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_VBLANK, MT9V032_VERTICAL_BLANKING_MIN, + MT9V032_VERTICAL_BLANKING_MAX, 1, + MT9V032_VERTICAL_BLANKING_DEF); + mt9v032->test_pattern = v4l2_ctrl_new_std_menu_items(&mt9v032->ctrls, + &mt9v032_ctrl_ops, V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(mt9v032_test_pattern_menu) - 1, 0, 0, + mt9v032_test_pattern_menu); + mt9v032->test_pattern_color = v4l2_ctrl_new_custom(&mt9v032->ctrls, + &mt9v032_test_pattern_color, NULL); + + v4l2_ctrl_cluster(2, &mt9v032->test_pattern); + + mt9v032->pixel_rate = + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_PIXEL_RATE, 0, 0, 1, 0); + + if (pdata && pdata->link_freqs) { + unsigned int def = 0; + + for (i = 0; pdata->link_freqs[i]; ++i) { + if (pdata->link_freqs[i] == pdata->link_def_freq) + def = i; + } + + mt9v032->link_freq = + v4l2_ctrl_new_int_menu(&mt9v032->ctrls, + &mt9v032_ctrl_ops, + V4L2_CID_LINK_FREQ, i - 1, def, + pdata->link_freqs); + v4l2_ctrl_cluster(2, &mt9v032->link_freq); + } + + + mt9v032->subdev.ctrl_handler = &mt9v032->ctrls; + + if (mt9v032->ctrls.error) + printk(KERN_INFO "%s: control initialization error %d\n", + __func__, mt9v032->ctrls.error); + + mt9v032->crop.left = MT9V032_COLUMN_START_DEF; + mt9v032->crop.top = MT9V032_ROW_START_DEF; + mt9v032->crop.width = MT9V032_WINDOW_WIDTH_DEF; + mt9v032->crop.height = MT9V032_WINDOW_HEIGHT_DEF; + + mt9v032->format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + mt9v032->format.width = MT9V032_WINDOW_WIDTH_DEF; + mt9v032->format.height = MT9V032_WINDOW_HEIGHT_DEF; + mt9v032->format.field = V4L2_FIELD_NONE; + mt9v032->format.colorspace = V4L2_COLORSPACE_SRGB; + + mt9v032->aec_agc = MT9V032_AEC_ENABLE | MT9V032_AGC_ENABLE; + mt9v032->hblank = MT9V032_HORIZONTAL_BLANKING_DEF; + mt9v032->sysclk = MT9V032_SYSCLK_FREQ_DEF; + + v4l2_i2c_subdev_init(&mt9v032->subdev, client, &mt9v032_subdev_ops); + mt9v032->subdev.internal_ops = &mt9v032_subdev_internal_ops; + mt9v032->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + mt9v032->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&mt9v032->subdev.entity, 1, &mt9v032->pad, 0); + if (ret < 0) + kfree(mt9v032); + + return ret; +} + +static int mt9v032_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + + v4l2_device_unregister_subdev(subdev); + media_entity_cleanup(&subdev->entity); + kfree(mt9v032); + return 0; +} + +static const struct i2c_device_id mt9v032_id[] = { + { "mt9v032", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v032_id); + +static struct i2c_driver mt9v032_driver = { + .driver = { + .name = "mt9v032", + }, + .probe = mt9v032_probe, + .remove = mt9v032_remove, + .id_table = mt9v032_id, +}; + +module_i2c_driver(mt9v032_driver); + +MODULE_DESCRIPTION("Aptina MT9V032 Camera driver"); +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/noon010pc30.c b/drivers/media/i2c/noon010pc30.c new file mode 100644 index 00000000..8554b47f --- /dev/null +++ b/drivers/media/i2c/noon010pc30.c @@ -0,0 +1,844 @@ +/* + * Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP + * + * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. + * Contact: Sylwester Nawrocki, + * + * Initial register configuration based on a driver authored by + * HeungJun Kim . + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable module debug trace. Set to 1 to enable."); + +#define MODULE_NAME "NOON010PC30" + +/* + * Register offsets within a page + * b15..b8 - page id, b7..b0 - register address + */ +#define POWER_CTRL_REG 0x0001 +#define PAGEMODE_REG 0x03 +#define DEVICE_ID_REG 0x0004 +#define NOON010PC30_ID 0x86 +#define VDO_CTL_REG(n) (0x0010 + (n)) +#define SYNC_CTL_REG 0x0012 +/* Window size and position */ +#define WIN_ROWH_REG 0x0013 +#define WIN_ROWL_REG 0x0014 +#define WIN_COLH_REG 0x0015 +#define WIN_COLL_REG 0x0016 +#define WIN_HEIGHTH_REG 0x0017 +#define WIN_HEIGHTL_REG 0x0018 +#define WIN_WIDTHH_REG 0x0019 +#define WIN_WIDTHL_REG 0x001A +#define HBLANKH_REG 0x001B +#define HBLANKL_REG 0x001C +#define VSYNCH_REG 0x001D +#define VSYNCL_REG 0x001E +/* VSYNC control */ +#define VS_CTL_REG(n) (0x00A1 + (n)) +/* page 1 */ +#define ISP_CTL_REG(n) (0x0110 + (n)) +#define YOFS_REG 0x0119 +#define DARK_YOFS_REG 0x011A +#define SAT_CTL_REG 0x0120 +#define BSAT_REG 0x0121 +#define RSAT_REG 0x0122 +/* Color correction */ +#define CMC_CTL_REG 0x0130 +#define CMC_OFSGH_REG 0x0133 +#define CMC_OFSGL_REG 0x0135 +#define CMC_SIGN_REG 0x0136 +#define CMC_GOFS_REG 0x0137 +#define CMC_COEF_REG(n) (0x0138 + (n)) +#define CMC_OFS_REG(n) (0x0141 + (n)) +/* Gamma correction */ +#define GMA_CTL_REG 0x0160 +#define GMA_COEF_REG(n) (0x0161 + (n)) +/* Lens Shading */ +#define LENS_CTRL_REG 0x01D0 +#define LENS_XCEN_REG 0x01D1 +#define LENS_YCEN_REG 0x01D2 +#define LENS_RC_REG 0x01D3 +#define LENS_GC_REG 0x01D4 +#define LENS_BC_REG 0x01D5 +#define L_AGON_REG 0x01D6 +#define L_AGOFF_REG 0x01D7 +/* Page 3 - Auto Exposure */ +#define AE_CTL_REG(n) (0x0310 + (n)) +#define AE_CTL9_REG 0x032C +#define AE_CTL10_REG 0x032D +#define AE_YLVL_REG 0x031C +#define AE_YTH_REG(n) (0x031D + (n)) +#define AE_WGT_REG 0x0326 +#define EXP_TIMEH_REG 0x0333 +#define EXP_TIMEM_REG 0x0334 +#define EXP_TIMEL_REG 0x0335 +#define EXP_MMINH_REG 0x0336 +#define EXP_MMINL_REG 0x0337 +#define EXP_MMAXH_REG 0x0338 +#define EXP_MMAXM_REG 0x0339 +#define EXP_MMAXL_REG 0x033A +/* Page 4 - Auto White Balance */ +#define AWB_CTL_REG(n) (0x0410 + (n)) +#define AWB_ENABE 0x80 +#define AWB_WGHT_REG 0x0419 +#define BGAIN_PAR_REG(n) (0x044F + (n)) +/* Manual white balance, when AWB_CTL2[0]=1 */ +#define MWB_RGAIN_REG 0x0466 +#define MWB_BGAIN_REG 0x0467 + +/* The token to mark an array end */ +#define REG_TERM 0xFFFF + +struct noon010_format { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; + u16 ispctl1_reg; +}; + +struct noon010_frmsize { + u16 width; + u16 height; + int vid_ctl1; +}; + +static const char * const noon010_supply_name[] = { + "vdd_core", "vddio", "vdda" +}; + +#define NOON010_NUM_SUPPLIES ARRAY_SIZE(noon010_supply_name) + +struct noon010_info { + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES]; + u32 gpio_nreset; + u32 gpio_nstby; + + /* Protects the struct members below */ + struct mutex lock; + + const struct noon010_format *curr_fmt; + const struct noon010_frmsize *curr_win; + unsigned int apply_new_cfg:1; + unsigned int streaming:1; + unsigned int hflip:1; + unsigned int vflip:1; + unsigned int power:1; + u8 i2c_reg_page; +}; + +struct i2c_regval { + u16 addr; + u16 val; +}; + +/* Supported resolutions. */ +static const struct noon010_frmsize noon010_sizes[] = { + { + .width = 352, + .height = 288, + .vid_ctl1 = 0, + }, { + .width = 176, + .height = 144, + .vid_ctl1 = 0x10, + }, { + .width = 88, + .height = 72, + .vid_ctl1 = 0x20, + }, +}; + +/* Supported pixel formats. */ +static const struct noon010_format noon010_formats[] = { + { + .code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x03, + }, { + .code = V4L2_MBUS_FMT_YVYU8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x02, + }, { + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0, + }, { + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x01, + }, { + .code = V4L2_MBUS_FMT_RGB565_2X8_BE, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x40, + }, +}; + +static const struct i2c_regval noon010_base_regs[] = { + { WIN_COLL_REG, 0x06 }, { HBLANKL_REG, 0x7C }, + /* Color corection and saturation */ + { ISP_CTL_REG(0), 0x30 }, { ISP_CTL_REG(2), 0x30 }, + { YOFS_REG, 0x80 }, { DARK_YOFS_REG, 0x04 }, + { SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 }, + { CMC_CTL_REG, 0x0F }, { CMC_OFSGH_REG, 0x3C }, + { CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x3F }, + { CMC_COEF_REG(0), 0x79 }, { CMC_OFS_REG(0), 0x00 }, + { CMC_COEF_REG(1), 0x39 }, { CMC_OFS_REG(1), 0x00 }, + { CMC_COEF_REG(2), 0x00 }, { CMC_OFS_REG(2), 0x00 }, + { CMC_COEF_REG(3), 0x11 }, { CMC_OFS_REG(3), 0x8B }, + { CMC_COEF_REG(4), 0x65 }, { CMC_OFS_REG(4), 0x07 }, + { CMC_COEF_REG(5), 0x14 }, { CMC_OFS_REG(5), 0x04 }, + { CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x9C }, + { CMC_COEF_REG(7), 0x33 }, { CMC_OFS_REG(7), 0x89 }, + { CMC_COEF_REG(8), 0x74 }, { CMC_OFS_REG(8), 0x25 }, + /* Automatic white balance */ + { AWB_CTL_REG(0), 0x78 }, { AWB_CTL_REG(1), 0x2E }, + { AWB_CTL_REG(2), 0x20 }, { AWB_CTL_REG(3), 0x85 }, + /* Auto exposure */ + { AE_CTL_REG(0), 0xDC }, { AE_CTL_REG(1), 0x81 }, + { AE_CTL_REG(2), 0x30 }, { AE_CTL_REG(3), 0xA5 }, + { AE_CTL_REG(4), 0x40 }, { AE_CTL_REG(5), 0x51 }, + { AE_CTL_REG(6), 0x33 }, { AE_CTL_REG(7), 0x7E }, + { AE_CTL9_REG, 0x00 }, { AE_CTL10_REG, 0x02 }, + { AE_YLVL_REG, 0x44 }, { AE_YTH_REG(0), 0x34 }, + { AE_YTH_REG(1), 0x30 }, { AE_WGT_REG, 0xD5 }, + /* Lens shading compensation */ + { LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 }, + { LENS_YCEN_REG, 0x70 }, { LENS_RC_REG, 0x53 }, + { LENS_GC_REG, 0x40 }, { LENS_BC_REG, 0x3E }, + { REG_TERM, 0 }, +}; + +static inline struct noon010_info *to_noon010(struct v4l2_subdev *sd) +{ + return container_of(sd, struct noon010_info, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct noon010_info, hdl)->sd; +} + +static inline int set_i2c_page(struct noon010_info *info, + struct i2c_client *client, unsigned int reg) +{ + u32 page = reg >> 8 & 0xFF; + int ret = 0; + + if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { + ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); + if (!ret) + info->i2c_reg_page = page; + } + return ret; +} + +static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct noon010_info *info = to_noon010(sd); + int ret = set_i2c_page(info, client, reg_addr); + + if (ret) + return ret; + return i2c_smbus_read_byte_data(client, reg_addr & 0xFF); +} + +static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct noon010_info *info = to_noon010(sd); + int ret = set_i2c_page(info, client, reg_addr); + + if (ret) + return ret; + return i2c_smbus_write_byte_data(client, reg_addr & 0xFF, val); +} + +static inline int noon010_bulk_write_reg(struct v4l2_subdev *sd, + const struct i2c_regval *msg) +{ + while (msg->addr != REG_TERM) { + int ret = cam_i2c_write(sd, msg->addr, msg->val); + + if (ret) + return ret; + msg++; + } + return 0; +} + +/* Device reset and sleep mode control */ +static int noon010_power_ctrl(struct v4l2_subdev *sd, bool reset, bool sleep) +{ + struct noon010_info *info = to_noon010(sd); + u8 reg = sleep ? 0xF1 : 0xF0; + int ret = 0; + + if (reset) { + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); + udelay(20); + } + if (!ret) { + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); + if (reset && !ret) + info->i2c_reg_page = -1; + } + return ret; +} + +/* Automatic white balance control */ +static int noon010_enable_autowhitebalance(struct v4l2_subdev *sd, int on) +{ + int ret; + + ret = cam_i2c_write(sd, AWB_CTL_REG(1), on ? 0x2E : 0x2F); + if (!ret) + ret = cam_i2c_write(sd, AWB_CTL_REG(0), on ? 0xFB : 0x7B); + return ret; +} + +/* Called with struct noon010_info.lock mutex held */ +static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip) +{ + struct noon010_info *info = to_noon010(sd); + int reg, ret; + + reg = cam_i2c_read(sd, VDO_CTL_REG(1)); + if (reg < 0) + return reg; + + reg &= 0x7C; + if (hflip) + reg |= 0x01; + if (vflip) + reg |= 0x02; + + ret = cam_i2c_write(sd, VDO_CTL_REG(1), reg | 0x80); + if (!ret) { + info->hflip = hflip; + info->vflip = vflip; + } + return ret; +} + +/* Configure resolution and color format */ +static int noon010_set_params(struct v4l2_subdev *sd) +{ + struct noon010_info *info = to_noon010(sd); + + int ret = cam_i2c_write(sd, VDO_CTL_REG(0), + info->curr_win->vid_ctl1); + if (ret) + return ret; + return cam_i2c_write(sd, ISP_CTL_REG(0), + info->curr_fmt->ispctl1_reg); +} + +/* Find nearest matching image pixel size. */ +static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf, + const struct noon010_frmsize **size) +{ + unsigned int min_err = ~0; + int i = ARRAY_SIZE(noon010_sizes); + const struct noon010_frmsize *fsize = &noon010_sizes[0], + *match = NULL; + + while (i--) { + int err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + + if (err < min_err) { + min_err = err; + match = fsize; + } + fsize++; + } + if (match) { + mf->width = match->width; + mf->height = match->height; + if (size) + *size = match; + return 0; + } + return -EINVAL; +} + +/* Called with info.lock mutex held */ +static int power_enable(struct noon010_info *info) +{ + int ret; + + if (info->power) { + v4l2_info(&info->sd, "%s: sensor is already on\n", __func__); + return 0; + } + + if (gpio_is_valid(info->gpio_nstby)) + gpio_set_value(info->gpio_nstby, 0); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_set_value(info->gpio_nreset, 0); + + ret = regulator_bulk_enable(NOON010_NUM_SUPPLIES, info->supply); + if (ret) + return ret; + + if (gpio_is_valid(info->gpio_nreset)) { + msleep(50); + gpio_set_value(info->gpio_nreset, 1); + } + if (gpio_is_valid(info->gpio_nstby)) { + udelay(1000); + gpio_set_value(info->gpio_nstby, 1); + } + if (gpio_is_valid(info->gpio_nreset)) { + udelay(1000); + gpio_set_value(info->gpio_nreset, 0); + msleep(100); + gpio_set_value(info->gpio_nreset, 1); + msleep(20); + } + info->power = 1; + + v4l2_dbg(1, debug, &info->sd, "%s: sensor is on\n", __func__); + return 0; +} + +/* Called with info.lock mutex held */ +static int power_disable(struct noon010_info *info) +{ + int ret; + + if (!info->power) { + v4l2_info(&info->sd, "%s: sensor is already off\n", __func__); + return 0; + } + + ret = regulator_bulk_disable(NOON010_NUM_SUPPLIES, info->supply); + if (ret) + return ret; + + if (gpio_is_valid(info->gpio_nstby)) + gpio_set_value(info->gpio_nstby, 0); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_set_value(info->gpio_nreset, 0); + + info->power = 0; + + v4l2_dbg(1, debug, &info->sd, "%s: sensor is off\n", __func__); + + return 0; +} + +static int noon010_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct noon010_info *info = to_noon010(sd); + int ret = 0; + + v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", + __func__, ctrl->id, ctrl->val); + + mutex_lock(&info->lock); + /* + * If the device is not powered up by the host driver do + * not apply any controls to H/W at this time. Instead + * the controls will be restored right after power-up. + */ + if (!info->power) + goto unlock; + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = noon010_enable_autowhitebalance(sd, ctrl->val); + break; + case V4L2_CID_BLUE_BALANCE: + ret = cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val); + break; + case V4L2_CID_RED_BALANCE: + ret = cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val); + break; + default: + ret = -EINVAL; + } +unlock: + mutex_unlock(&info->lock); + return ret; +} + +static int noon010_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(noon010_formats)) + return -EINVAL; + + code->code = noon010_formats[code->index].code; + return 0; +} + +static int noon010_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct noon010_info *info = to_noon010(sd); + struct v4l2_mbus_framefmt *mf; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh) { + mf = v4l2_subdev_get_try_format(fh, 0); + fmt->format = *mf; + } + return 0; + } + mf = &fmt->format; + + mutex_lock(&info->lock); + mf->width = info->curr_win->width; + mf->height = info->curr_win->height; + mf->code = info->curr_fmt->code; + mf->colorspace = info->curr_fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + mutex_unlock(&info->lock); + return 0; +} + +/* Return nearest media bus frame format. */ +static const struct noon010_format *noon010_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + int i = ARRAY_SIZE(noon010_formats); + + while (--i) + if (mf->code == noon010_formats[i].code) + break; + mf->code = noon010_formats[i].code; + + return &noon010_formats[i]; +} + +static int noon010_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct noon010_info *info = to_noon010(sd); + const struct noon010_frmsize *size = NULL; + const struct noon010_format *nf; + struct v4l2_mbus_framefmt *mf; + int ret = 0; + + nf = noon010_try_fmt(sd, &fmt->format); + noon010_try_frame_size(&fmt->format, &size); + fmt->format.colorspace = V4L2_COLORSPACE_JPEG; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh) { + mf = v4l2_subdev_get_try_format(fh, 0); + *mf = fmt->format; + } + return 0; + } + mutex_lock(&info->lock); + if (!info->streaming) { + info->apply_new_cfg = 1; + info->curr_fmt = nf; + info->curr_win = size; + } else { + ret = -EBUSY; + } + mutex_unlock(&info->lock); + return ret; +} + +/* Called with struct noon010_info.lock mutex held */ +static int noon010_base_config(struct v4l2_subdev *sd) +{ + int ret = noon010_bulk_write_reg(sd, noon010_base_regs); + if (!ret) + ret = noon010_set_params(sd); + if (!ret) + ret = noon010_set_flip(sd, 1, 0); + + return ret; +} + +static int noon010_s_power(struct v4l2_subdev *sd, int on) +{ + struct noon010_info *info = to_noon010(sd); + int ret; + + mutex_lock(&info->lock); + if (on) { + ret = power_enable(info); + if (!ret) + ret = noon010_base_config(sd); + } else { + noon010_power_ctrl(sd, false, true); + ret = power_disable(info); + } + mutex_unlock(&info->lock); + + /* Restore the controls state */ + if (!ret && on) + ret = v4l2_ctrl_handler_setup(&info->hdl); + + return ret; +} + +static int noon010_s_stream(struct v4l2_subdev *sd, int on) +{ + struct noon010_info *info = to_noon010(sd); + int ret = 0; + + mutex_lock(&info->lock); + if (!info->streaming != !on) { + ret = noon010_power_ctrl(sd, false, !on); + if (!ret) + info->streaming = on; + } + if (!ret && on && info->apply_new_cfg) { + ret = noon010_set_params(sd); + if (!ret) + info->apply_new_cfg = 0; + } + mutex_unlock(&info->lock); + return ret; +} + +static int noon010_log_status(struct v4l2_subdev *sd) +{ + struct noon010_info *info = to_noon010(sd); + + v4l2_ctrl_handler_log_status(&info->hdl, sd->name); + return 0; +} + +static int noon010_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(fh, 0); + + mf->width = noon010_sizes[0].width; + mf->height = noon010_sizes[0].height; + mf->code = noon010_formats[0].code; + mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->field = V4L2_FIELD_NONE; + return 0; +} + +static const struct v4l2_subdev_internal_ops noon010_subdev_internal_ops = { + .open = noon010_open, +}; + +static const struct v4l2_ctrl_ops noon010_ctrl_ops = { + .s_ctrl = noon010_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops noon010_core_ops = { + .s_power = noon010_s_power, + .log_status = noon010_log_status, +}; + +static struct v4l2_subdev_pad_ops noon010_pad_ops = { + .enum_mbus_code = noon010_enum_mbus_code, + .get_fmt = noon010_get_fmt, + .set_fmt = noon010_set_fmt, +}; + +static struct v4l2_subdev_video_ops noon010_video_ops = { + .s_stream = noon010_s_stream, +}; + +static const struct v4l2_subdev_ops noon010_ops = { + .core = &noon010_core_ops, + .pad = &noon010_pad_ops, + .video = &noon010_video_ops, +}; + +/* Return 0 if NOON010PC30L sensor type was detected or -ENODEV otherwise. */ +static int noon010_detect(struct i2c_client *client, struct noon010_info *info) +{ + int ret; + + ret = power_enable(info); + if (ret) + return ret; + + ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); + if (ret < 0) + dev_err(&client->dev, "I2C read failed: 0x%X\n", ret); + + power_disable(info); + + return ret == NOON010PC30_ID ? 0 : -ENODEV; +} + +static int noon010_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct noon010_info *info; + struct v4l2_subdev *sd; + const struct noon010pc30_platform_data *pdata + = client->dev.platform_data; + int ret; + int i; + + if (!pdata) { + dev_err(&client->dev, "No platform data!\n"); + return -EIO; + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + mutex_init(&info->lock); + sd = &info->sd; + v4l2_i2c_subdev_init(sd, client, &noon010_ops); + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); + + sd->internal_ops = &noon010_subdev_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + v4l2_ctrl_handler_init(&info->hdl, 3); + + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_RED_BALANCE, 0, 127, 1, 64); + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64); + + sd->ctrl_handler = &info->hdl; + + ret = info->hdl.error; + if (ret) + goto np_err; + + info->i2c_reg_page = -1; + info->gpio_nreset = -EINVAL; + info->gpio_nstby = -EINVAL; + info->curr_fmt = &noon010_formats[0]; + info->curr_win = &noon010_sizes[0]; + + if (gpio_is_valid(pdata->gpio_nreset)) { + ret = gpio_request(pdata->gpio_nreset, "NOON010PC30 NRST"); + if (ret) { + dev_err(&client->dev, "GPIO request error: %d\n", ret); + goto np_err; + } + info->gpio_nreset = pdata->gpio_nreset; + gpio_direction_output(info->gpio_nreset, 0); + gpio_export(info->gpio_nreset, 0); + } + + if (gpio_is_valid(pdata->gpio_nstby)) { + ret = gpio_request(pdata->gpio_nstby, "NOON010PC30 NSTBY"); + if (ret) { + dev_err(&client->dev, "GPIO request error: %d\n", ret); + goto np_gpio_err; + } + info->gpio_nstby = pdata->gpio_nstby; + gpio_direction_output(info->gpio_nstby, 0); + gpio_export(info->gpio_nstby, 0); + } + + for (i = 0; i < NOON010_NUM_SUPPLIES; i++) + info->supply[i].supply = noon010_supply_name[i]; + + ret = regulator_bulk_get(&client->dev, NOON010_NUM_SUPPLIES, + info->supply); + if (ret) + goto np_reg_err; + + info->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + ret = media_entity_init(&sd->entity, 1, &info->pad, 0); + if (ret < 0) + goto np_me_err; + + ret = noon010_detect(client, info); + if (!ret) + return 0; + +np_me_err: + regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply); +np_reg_err: + if (gpio_is_valid(info->gpio_nstby)) + gpio_free(info->gpio_nstby); +np_gpio_err: + if (gpio_is_valid(info->gpio_nreset)) + gpio_free(info->gpio_nreset); +np_err: + v4l2_ctrl_handler_free(&info->hdl); + v4l2_device_unregister_subdev(sd); + kfree(info); + return ret; +} + +static int noon010_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct noon010_info *info = to_noon010(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&info->hdl); + + regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_free(info->gpio_nreset); + + if (gpio_is_valid(info->gpio_nstby)) + gpio_free(info->gpio_nstby); + + media_entity_cleanup(&sd->entity); + kfree(info); + return 0; +} + +static const struct i2c_device_id noon010_id[] = { + { MODULE_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, noon010_id); + + +static struct i2c_driver noon010_i2c_driver = { + .driver = { + .name = MODULE_NAME + }, + .probe = noon010_probe, + .remove = noon010_remove, + .id_table = noon010_id, +}; + +module_i2c_driver(noon010_i2c_driver); + +MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver"); +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/ov7640.c b/drivers/media/i2c/ov7640.c new file mode 100644 index 00000000..b0cc927e --- /dev/null +++ b/drivers/media/i2c/ov7640.c @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("OmniVision ov7640 sensor driver"); +MODULE_LICENSE("GPL v2"); + +static const u8 initial_registers[] = { + 0x12, 0x80, + 0x12, 0x54, + 0x14, 0x24, + 0x15, 0x01, + 0x28, 0x20, + 0x75, 0x82, + 0xFF, 0xFF, /* Terminator (reg 0xFF is unused) */ +}; + +static int write_regs(struct i2c_client *client, const u8 *regs) +{ + int i; + + for (i = 0; regs[i] != 0xFF; i += 2) + if (i2c_smbus_write_byte_data(client, regs[i], regs[i + 1]) < 0) + return -1; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_ops ov7640_ops; + +static int ov7640_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct v4l2_subdev *sd; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + v4l2_i2c_subdev_init(sd, client, &ov7640_ops); + + client->flags = I2C_CLIENT_SCCB; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + if (write_regs(client, initial_registers) < 0) { + v4l_err(client, "error initializing OV7640\n"); + kfree(sd); + return -ENODEV; + } + + return 0; +} + + +static int ov7640_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + return 0; +} + +static const struct i2c_device_id ov7640_id[] = { + { "ov7640", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov7640_id); + +static struct i2c_driver ov7640_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ov7640", + }, + .probe = ov7640_probe, + .remove = ov7640_remove, + .id_table = ov7640_id, +}; +module_i2c_driver(ov7640_driver); diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c new file mode 100644 index 00000000..3ead3a83 --- /dev/null +++ b/drivers/media/i2c/ov7670.c @@ -0,0 +1,1683 @@ +/* + * A V4L2 driver for OmniVision OV7670 cameras. + * + * Copyright 2006 One Laptop Per Child Association, Inc. Written + * by Jonathan Corbet with substantial inspiration from Mark + * McClelland's ovcamchip code. + * + * Copyright 2006-7 Jonathan Corbet + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Jonathan Corbet "); +MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors"); +MODULE_LICENSE("GPL"); + +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* + * Basic window sizes. These probably belong somewhere more globally + * useful. + */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 + +/* + * The 7670 sits on i2c with ID 0x42 + */ +#define OV7670_I2C_ADDR 0x42 + +#define PLL_FACTOR 4 + +/* Registers */ +#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */ +#define REG_BLUE 0x01 /* blue gain */ +#define REG_RED 0x02 /* red gain */ +#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */ +#define REG_COM1 0x04 /* Control 1 */ +#define COM1_CCIR656 0x40 /* CCIR656 enable */ +#define REG_BAVE 0x05 /* U/B Average level */ +#define REG_GbAVE 0x06 /* Y/Gb Average level */ +#define REG_AECHH 0x07 /* AEC MS 5 bits */ +#define REG_RAVE 0x08 /* V/R Average level */ +#define REG_COM2 0x09 /* Control 2 */ +#define COM2_SSLEEP 0x10 /* Soft sleep mode */ +#define REG_PID 0x0a /* Product ID MSB */ +#define REG_VER 0x0b /* Product ID LSB */ +#define REG_COM3 0x0c /* Control 3 */ +#define COM3_SWAP 0x40 /* Byte swap */ +#define COM3_SCALEEN 0x08 /* Enable scaling */ +#define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */ +#define REG_COM4 0x0d /* Control 4 */ +#define REG_COM5 0x0e /* All "reserved" */ +#define REG_COM6 0x0f /* Control 6 */ +#define REG_AECH 0x10 /* More bits of AEC value */ +#define REG_CLKRC 0x11 /* Clocl control */ +#define CLK_EXT 0x40 /* Use external clock directly */ +#define CLK_SCALE 0x3f /* Mask for internal clock scale */ +#define REG_COM7 0x12 /* Control 7 */ +#define COM7_RESET 0x80 /* Register reset */ +#define COM7_FMT_MASK 0x38 +#define COM7_FMT_VGA 0x00 +#define COM7_FMT_CIF 0x20 /* CIF format */ +#define COM7_FMT_QVGA 0x10 /* QVGA format */ +#define COM7_FMT_QCIF 0x08 /* QCIF format */ +#define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */ +#define COM7_YUV 0x00 /* YUV */ +#define COM7_BAYER 0x01 /* Bayer format */ +#define COM7_PBAYER 0x05 /* "Processed bayer" */ +#define REG_COM8 0x13 /* Control 8 */ +#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ +#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ +#define COM8_BFILT 0x20 /* Band filter enable */ +#define COM8_AGC 0x04 /* Auto gain enable */ +#define COM8_AWB 0x02 /* White balance enable */ +#define COM8_AEC 0x01 /* Auto exposure enable */ +#define REG_COM9 0x14 /* Control 9 - gain ceiling */ +#define REG_COM10 0x15 /* Control 10 */ +#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ +#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ +#define COM10_HREF_REV 0x08 /* Reverse HREF */ +#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ +#define COM10_VS_NEG 0x02 /* VSYNC negative */ +#define COM10_HS_NEG 0x01 /* HSYNC negative */ +#define REG_HSTART 0x17 /* Horiz start high bits */ +#define REG_HSTOP 0x18 /* Horiz stop high bits */ +#define REG_VSTART 0x19 /* Vert start high bits */ +#define REG_VSTOP 0x1a /* Vert stop high bits */ +#define REG_PSHFT 0x1b /* Pixel delay after HREF */ +#define REG_MIDH 0x1c /* Manuf. ID high */ +#define REG_MIDL 0x1d /* Manuf. ID low */ +#define REG_MVFP 0x1e /* Mirror / vflip */ +#define MVFP_MIRROR 0x20 /* Mirror image */ +#define MVFP_FLIP 0x10 /* Vertical flip */ + +#define REG_AEW 0x24 /* AGC upper limit */ +#define REG_AEB 0x25 /* AGC lower limit */ +#define REG_VPT 0x26 /* AGC/AEC fast mode op region */ +#define REG_HSYST 0x30 /* HSYNC rising edge delay */ +#define REG_HSYEN 0x31 /* HSYNC falling edge delay */ +#define REG_HREF 0x32 /* HREF pieces */ +#define REG_TSLB 0x3a /* lots of stuff */ +#define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */ +#define REG_COM11 0x3b /* Control 11 */ +#define COM11_NIGHT 0x80 /* NIght mode enable */ +#define COM11_NMFR 0x60 /* Two bit NM frame rate */ +#define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */ +#define COM11_50HZ 0x08 /* Manual 50Hz select */ +#define COM11_EXP 0x02 +#define REG_COM12 0x3c /* Control 12 */ +#define COM12_HREF 0x80 /* HREF always */ +#define REG_COM13 0x3d /* Control 13 */ +#define COM13_GAMMA 0x80 /* Gamma enable */ +#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ +#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ +#define REG_COM14 0x3e /* Control 14 */ +#define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */ +#define REG_EDGE 0x3f /* Edge enhancement factor */ +#define REG_COM15 0x40 /* Control 15 */ +#define COM15_R10F0 0x00 /* Data range 10 to F0 */ +#define COM15_R01FE 0x80 /* 01 to FE */ +#define COM15_R00FF 0xc0 /* 00 to FF */ +#define COM15_RGB565 0x10 /* RGB565 output */ +#define COM15_RGB555 0x30 /* RGB555 output */ +#define REG_COM16 0x41 /* Control 16 */ +#define COM16_AWBGAIN 0x08 /* AWB gain enable */ +#define REG_COM17 0x42 /* Control 17 */ +#define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */ +#define COM17_CBAR 0x08 /* DSP Color bar */ + +/* + * This matrix defines how the colors are generated, must be + * tweaked to adjust hue and saturation. + * + * Order: v-red, v-green, v-blue, u-red, u-green, u-blue + * + * They are nine-bit signed quantities, with the sign bit + * stored in 0x58. Sign for v-red is bit 0, and up from there. + */ +#define REG_CMATRIX_BASE 0x4f +#define CMATRIX_LEN 6 +#define REG_CMATRIX_SIGN 0x58 + + +#define REG_BRIGHT 0x55 /* Brightness */ +#define REG_CONTRAS 0x56 /* Contrast control */ + +#define REG_GFIX 0x69 /* Fix gain control */ + +#define REG_DBLV 0x6b /* PLL control an debugging */ +#define DBLV_BYPASS 0x00 /* Bypass PLL */ +#define DBLV_X4 0x01 /* clock x4 */ +#define DBLV_X6 0x10 /* clock x6 */ +#define DBLV_X8 0x11 /* clock x8 */ + +#define REG_REG76 0x76 /* OV's name */ +#define R76_BLKPCOR 0x80 /* Black pixel correction enable */ +#define R76_WHTPCOR 0x40 /* White pixel correction enable */ + +#define REG_RGB444 0x8c /* RGB 444 control */ +#define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */ +#define R444_RGBX 0x01 /* Empty nibble at end */ + +#define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */ +#define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */ + +#define REG_BD50MAX 0xa5 /* 50hz banding step limit */ +#define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */ +#define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */ +#define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */ +#define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */ +#define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ +#define REG_BD60MAX 0xab /* 60hz banding step limit */ + +enum ov7670_model { + MODEL_OV7670 = 0, + MODEL_OV7675, +}; + +struct ov7670_win_size { + int width; + int height; + unsigned char com7_bit; + int hstart; /* Start/stop values for the camera. Note */ + int hstop; /* that they do not always make complete */ + int vstart; /* sense to humans, but evidently the sensor */ + int vstop; /* will do the right thing... */ + struct regval_list *regs; /* Regs to tweak */ +}; + +struct ov7670_devtype { + /* formats supported for each model */ + struct ov7670_win_size *win_sizes; + unsigned int n_win_sizes; + /* callbacks for frame rate control */ + int (*set_framerate)(struct v4l2_subdev *, struct v4l2_fract *); + void (*get_framerate)(struct v4l2_subdev *, struct v4l2_fract *); +}; + +/* + * Information we maintain about a known sensor. + */ +struct ov7670_format_struct; /* coming later */ +struct ov7670_info { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct { + /* gain cluster */ + struct v4l2_ctrl *auto_gain; + struct v4l2_ctrl *gain; + }; + struct { + /* exposure cluster */ + struct v4l2_ctrl *auto_exposure; + struct v4l2_ctrl *exposure; + }; + struct { + /* saturation/hue cluster */ + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *hue; + }; + struct ov7670_format_struct *fmt; /* Current format */ + int min_width; /* Filter out smaller sizes */ + int min_height; /* Filter out smaller sizes */ + int clock_speed; /* External clock speed (MHz) */ + u8 clkrc; /* Clock divider value */ + bool use_smbus; /* Use smbus I/O instead of I2C */ + bool pll_bypass; + bool pclk_hb_disable; + const struct ov7670_devtype *devtype; /* Device specifics */ +}; + +static inline struct ov7670_info *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov7670_info, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ov7670_info, hdl)->sd; +} + + + +/* + * The default register settings, as obtained from OmniVision. There + * is really no making sense of most of these - lots of "reserved" values + * and such. + * + * These settings give VGA YUYV. + */ + +struct regval_list { + unsigned char reg_num; + unsigned char value; +}; + +static struct regval_list ov7670_default_regs[] = { + { REG_COM7, COM7_RESET }, +/* + * Clock scale: 3 = 15fps + * 2 = 20fps + * 1 = 30fps + */ + { REG_CLKRC, 0x1 }, /* OV: clock scale (30 fps) */ + { REG_TSLB, 0x04 }, /* OV */ + { REG_COM7, 0 }, /* VGA */ + /* + * Set the hardware window. These values from OV don't entirely + * make sense - hstop is less than hstart. But they work... + */ + { REG_HSTART, 0x13 }, { REG_HSTOP, 0x01 }, + { REG_HREF, 0xb6 }, { REG_VSTART, 0x02 }, + { REG_VSTOP, 0x7a }, { REG_VREF, 0x0a }, + + { REG_COM3, 0 }, { REG_COM14, 0 }, + /* Mystery scaling numbers */ + { 0x70, 0x3a }, { 0x71, 0x35 }, + { 0x72, 0x11 }, { 0x73, 0xf0 }, + { 0xa2, 0x02 }, { REG_COM10, 0x0 }, + + /* Gamma curve values */ + { 0x7a, 0x20 }, { 0x7b, 0x10 }, + { 0x7c, 0x1e }, { 0x7d, 0x35 }, + { 0x7e, 0x5a }, { 0x7f, 0x69 }, + { 0x80, 0x76 }, { 0x81, 0x80 }, + { 0x82, 0x88 }, { 0x83, 0x8f }, + { 0x84, 0x96 }, { 0x85, 0xa3 }, + { 0x86, 0xaf }, { 0x87, 0xc4 }, + { 0x88, 0xd7 }, { 0x89, 0xe8 }, + + /* AGC and AEC parameters. Note we start by disabling those features, + then turn them only after tweaking the values. */ + { REG_COM8, COM8_FASTAEC | COM8_AECSTEP | COM8_BFILT }, + { REG_GAIN, 0 }, { REG_AECH, 0 }, + { REG_COM4, 0x40 }, /* magic reserved bit */ + { REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ + { REG_BD50MAX, 0x05 }, { REG_BD60MAX, 0x07 }, + { REG_AEW, 0x95 }, { REG_AEB, 0x33 }, + { REG_VPT, 0xe3 }, { REG_HAECC1, 0x78 }, + { REG_HAECC2, 0x68 }, { 0xa1, 0x03 }, /* magic */ + { REG_HAECC3, 0xd8 }, { REG_HAECC4, 0xd8 }, + { REG_HAECC5, 0xf0 }, { REG_HAECC6, 0x90 }, + { REG_HAECC7, 0x94 }, + { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC }, + + /* Almost all of these are magic "reserved" values. */ + { REG_COM5, 0x61 }, { REG_COM6, 0x4b }, + { 0x16, 0x02 }, { REG_MVFP, 0x07 }, + { 0x21, 0x02 }, { 0x22, 0x91 }, + { 0x29, 0x07 }, { 0x33, 0x0b }, + { 0x35, 0x0b }, { 0x37, 0x1d }, + { 0x38, 0x71 }, { 0x39, 0x2a }, + { REG_COM12, 0x78 }, { 0x4d, 0x40 }, + { 0x4e, 0x20 }, { REG_GFIX, 0 }, + { 0x6b, 0x4a }, { 0x74, 0x10 }, + { 0x8d, 0x4f }, { 0x8e, 0 }, + { 0x8f, 0 }, { 0x90, 0 }, + { 0x91, 0 }, { 0x96, 0 }, + { 0x9a, 0 }, { 0xb0, 0x84 }, + { 0xb1, 0x0c }, { 0xb2, 0x0e }, + { 0xb3, 0x82 }, { 0xb8, 0x0a }, + + /* More reserved magic, some of which tweaks white balance */ + { 0x43, 0x0a }, { 0x44, 0xf0 }, + { 0x45, 0x34 }, { 0x46, 0x58 }, + { 0x47, 0x28 }, { 0x48, 0x3a }, + { 0x59, 0x88 }, { 0x5a, 0x88 }, + { 0x5b, 0x44 }, { 0x5c, 0x67 }, + { 0x5d, 0x49 }, { 0x5e, 0x0e }, + { 0x6c, 0x0a }, { 0x6d, 0x55 }, + { 0x6e, 0x11 }, { 0x6f, 0x9f }, /* "9e for advance AWB" */ + { 0x6a, 0x40 }, { REG_BLUE, 0x40 }, + { REG_RED, 0x60 }, + { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC|COM8_AWB }, + + /* Matrix coefficients */ + { 0x4f, 0x80 }, { 0x50, 0x80 }, + { 0x51, 0 }, { 0x52, 0x22 }, + { 0x53, 0x5e }, { 0x54, 0x80 }, + { 0x58, 0x9e }, + + { REG_COM16, COM16_AWBGAIN }, { REG_EDGE, 0 }, + { 0x75, 0x05 }, { 0x76, 0xe1 }, + { 0x4c, 0 }, { 0x77, 0x01 }, + { REG_COM13, 0xc3 }, { 0x4b, 0x09 }, + { 0xc9, 0x60 }, { REG_COM16, 0x38 }, + { 0x56, 0x40 }, + + { 0x34, 0x11 }, { REG_COM11, COM11_EXP|COM11_HZAUTO }, + { 0xa4, 0x88 }, { 0x96, 0 }, + { 0x97, 0x30 }, { 0x98, 0x20 }, + { 0x99, 0x30 }, { 0x9a, 0x84 }, + { 0x9b, 0x29 }, { 0x9c, 0x03 }, + { 0x9d, 0x4c }, { 0x9e, 0x3f }, + { 0x78, 0x04 }, + + /* Extra-weird stuff. Some sort of multiplexor register */ + { 0x79, 0x01 }, { 0xc8, 0xf0 }, + { 0x79, 0x0f }, { 0xc8, 0x00 }, + { 0x79, 0x10 }, { 0xc8, 0x7e }, + { 0x79, 0x0a }, { 0xc8, 0x80 }, + { 0x79, 0x0b }, { 0xc8, 0x01 }, + { 0x79, 0x0c }, { 0xc8, 0x0f }, + { 0x79, 0x0d }, { 0xc8, 0x20 }, + { 0x79, 0x09 }, { 0xc8, 0x80 }, + { 0x79, 0x02 }, { 0xc8, 0xc0 }, + { 0x79, 0x03 }, { 0xc8, 0x40 }, + { 0x79, 0x05 }, { 0xc8, 0x30 }, + { 0x79, 0x26 }, + + { 0xff, 0xff }, /* END MARKER */ +}; + + +/* + * Here we'll try to encapsulate the changes for just the output + * video format. + * + * RGB656 and YUV422 come from OV; RGB444 is homebrewed. + * + * IMPORTANT RULE: the first entry must be for COM7, see ov7670_s_fmt for why. + */ + + +static struct regval_list ov7670_fmt_yuv422[] = { + { REG_COM7, 0x0 }, /* Selects YUV mode */ + { REG_RGB444, 0 }, /* No RGB444 please */ + { REG_COM1, 0 }, /* CCIR601 */ + { REG_COM15, COM15_R00FF }, + { REG_COM9, 0x48 }, /* 32x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0x80 }, /* "matrix coefficient 1" */ + { 0x50, 0x80 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x22 }, /* "matrix coefficient 4" */ + { 0x53, 0x5e }, /* "matrix coefficient 5" */ + { 0x54, 0x80 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT }, + { 0xff, 0xff }, +}; + +static struct regval_list ov7670_fmt_rgb565[] = { + { REG_COM7, COM7_RGB }, /* Selects RGB mode */ + { REG_RGB444, 0 }, /* No RGB444 please */ + { REG_COM1, 0x0 }, /* CCIR601 */ + { REG_COM15, COM15_RGB565 }, + { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ + { 0x50, 0xb3 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x3d }, /* "matrix coefficient 4" */ + { 0x53, 0xa7 }, /* "matrix coefficient 5" */ + { 0x54, 0xe4 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT }, + { 0xff, 0xff }, +}; + +static struct regval_list ov7670_fmt_rgb444[] = { + { REG_COM7, COM7_RGB }, /* Selects RGB mode */ + { REG_RGB444, R444_ENABLE }, /* Enable xxxxrrrr ggggbbbb */ + { REG_COM1, 0x0 }, /* CCIR601 */ + { REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */ + { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ + { 0x50, 0xb3 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x3d }, /* "matrix coefficient 4" */ + { 0x53, 0xa7 }, /* "matrix coefficient 5" */ + { 0x54, 0xe4 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT|0x2 }, /* Magic rsvd bit */ + { 0xff, 0xff }, +}; + +static struct regval_list ov7670_fmt_raw[] = { + { REG_COM7, COM7_BAYER }, + { REG_COM13, 0x08 }, /* No gamma, magic rsvd bit */ + { REG_COM16, 0x3d }, /* Edge enhancement, denoise */ + { REG_REG76, 0xe1 }, /* Pix correction, magic rsvd */ + { 0xff, 0xff }, +}; + + + +/* + * Low-level register I/O. + * + * Note that there are two versions of these. On the XO 1, the + * i2c controller only does SMBUS, so that's what we use. The + * ov7670 is not really an SMBUS device, though, so the communication + * is not always entirely reliable. + */ +static int ov7670_read_smbus(struct v4l2_subdev *sd, unsigned char reg, + unsigned char *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret >= 0) { + *value = (unsigned char)ret; + ret = 0; + } + return ret; +} + + +static int ov7670_write_smbus(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = i2c_smbus_write_byte_data(client, reg, value); + + if (reg == REG_COM7 && (value & COM7_RESET)) + msleep(5); /* Wait for reset to run */ + return ret; +} + +/* + * On most platforms, we'd rather do straight i2c I/O. + */ +static int ov7670_read_i2c(struct v4l2_subdev *sd, unsigned char reg, + unsigned char *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 data = reg; + struct i2c_msg msg; + int ret; + + /* + * Send out the register address... + */ + msg.addr = client->addr; + msg.flags = 0; + msg.len = 1; + msg.buf = &data; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + printk(KERN_ERR "Error %d on register write\n", ret); + return ret; + } + /* + * ...then read back the result. + */ + msg.flags = I2C_M_RD; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret >= 0) { + *value = data; + ret = 0; + } + return ret; +} + + +static int ov7670_write_i2c(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_msg msg; + unsigned char data[2] = { reg, value }; + int ret; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2; + msg.buf = data; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret > 0) + ret = 0; + if (reg == REG_COM7 && (value & COM7_RESET)) + msleep(5); /* Wait for reset to run */ + return ret; +} + +static int ov7670_read(struct v4l2_subdev *sd, unsigned char reg, + unsigned char *value) +{ + struct ov7670_info *info = to_state(sd); + if (info->use_smbus) + return ov7670_read_smbus(sd, reg, value); + else + return ov7670_read_i2c(sd, reg, value); +} + +static int ov7670_write(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct ov7670_info *info = to_state(sd); + if (info->use_smbus) + return ov7670_write_smbus(sd, reg, value); + else + return ov7670_write_i2c(sd, reg, value); +} + +/* + * Write a list of register settings; ff/ff stops the process. + */ +static int ov7670_write_array(struct v4l2_subdev *sd, struct regval_list *vals) +{ + while (vals->reg_num != 0xff || vals->value != 0xff) { + int ret = ov7670_write(sd, vals->reg_num, vals->value); + if (ret < 0) + return ret; + vals++; + } + return 0; +} + + +/* + * Stuff that knows about the sensor. + */ +static int ov7670_reset(struct v4l2_subdev *sd, u32 val) +{ + ov7670_write(sd, REG_COM7, COM7_RESET); + msleep(1); + return 0; +} + + +static int ov7670_init(struct v4l2_subdev *sd, u32 val) +{ + return ov7670_write_array(sd, ov7670_default_regs); +} + + + +static int ov7670_detect(struct v4l2_subdev *sd) +{ + unsigned char v; + int ret; + + ret = ov7670_init(sd, 0); + if (ret < 0) + return ret; + ret = ov7670_read(sd, REG_MIDH, &v); + if (ret < 0) + return ret; + if (v != 0x7f) /* OV manuf. id. */ + return -ENODEV; + ret = ov7670_read(sd, REG_MIDL, &v); + if (ret < 0) + return ret; + if (v != 0xa2) + return -ENODEV; + /* + * OK, we know we have an OmniVision chip...but which one? + */ + ret = ov7670_read(sd, REG_PID, &v); + if (ret < 0) + return ret; + if (v != 0x76) /* PID + VER = 0x76 / 0x73 */ + return -ENODEV; + ret = ov7670_read(sd, REG_VER, &v); + if (ret < 0) + return ret; + if (v != 0x73) /* PID + VER = 0x76 / 0x73 */ + return -ENODEV; + return 0; +} + + +/* + * Store information about the video data format. The color matrix + * is deeply tied into the format, so keep the relevant values here. + * The magic matrix numbers come from OmniVision. + */ +static struct ov7670_format_struct { + enum v4l2_mbus_pixelcode mbus_code; + enum v4l2_colorspace colorspace; + struct regval_list *regs; + int cmatrix[CMATRIX_LEN]; +} ov7670_formats[] = { + { + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .regs = ov7670_fmt_yuv422, + .cmatrix = { 128, -128, 0, -34, -94, 128 }, + }, + { + .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .regs = ov7670_fmt_rgb444, + .cmatrix = { 179, -179, 0, -61, -176, 228 }, + }, + { + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .regs = ov7670_fmt_rgb565, + .cmatrix = { 179, -179, 0, -61, -176, 228 }, + }, + { + .mbus_code = V4L2_MBUS_FMT_SBGGR8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .regs = ov7670_fmt_raw, + .cmatrix = { 0, 0, 0, 0, 0, 0 }, + }, +}; +#define N_OV7670_FMTS ARRAY_SIZE(ov7670_formats) + + +/* + * Then there is the issue of window sizes. Try to capture the info here. + */ + +/* + * QCIF mode is done (by OV) in a very strange way - it actually looks like + * VGA with weird scaling options - they do *not* use the canned QCIF mode + * which is allegedly provided by the sensor. So here's the weird register + * settings. + */ +static struct regval_list ov7670_qcif_regs[] = { + { REG_COM3, COM3_SCALEEN|COM3_DCWEN }, + { REG_COM3, COM3_DCWEN }, + { REG_COM14, COM14_DCWEN | 0x01}, + { 0x73, 0xf1 }, + { 0xa2, 0x52 }, + { 0x7b, 0x1c }, + { 0x7c, 0x28 }, + { 0x7d, 0x3c }, + { 0x7f, 0x69 }, + { REG_COM9, 0x38 }, + { 0xa1, 0x0b }, + { 0x74, 0x19 }, + { 0x9a, 0x80 }, + { 0x43, 0x14 }, + { REG_COM13, 0xc0 }, + { 0xff, 0xff }, +}; + +static struct ov7670_win_size ov7670_win_sizes[] = { + /* VGA */ + { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .com7_bit = COM7_FMT_VGA, + .hstart = 158, /* These values from */ + .hstop = 14, /* Omnivision */ + .vstart = 10, + .vstop = 490, + .regs = NULL, + }, + /* CIF */ + { + .width = CIF_WIDTH, + .height = CIF_HEIGHT, + .com7_bit = COM7_FMT_CIF, + .hstart = 170, /* Empirically determined */ + .hstop = 90, + .vstart = 14, + .vstop = 494, + .regs = NULL, + }, + /* QVGA */ + { + .width = QVGA_WIDTH, + .height = QVGA_HEIGHT, + .com7_bit = COM7_FMT_QVGA, + .hstart = 168, /* Empirically determined */ + .hstop = 24, + .vstart = 12, + .vstop = 492, + .regs = NULL, + }, + /* QCIF */ + { + .width = QCIF_WIDTH, + .height = QCIF_HEIGHT, + .com7_bit = COM7_FMT_VGA, /* see comment above */ + .hstart = 456, /* Empirically determined */ + .hstop = 24, + .vstart = 14, + .vstop = 494, + .regs = ov7670_qcif_regs, + } +}; + +static struct ov7670_win_size ov7675_win_sizes[] = { + /* + * Currently, only VGA is supported. Theoretically it could be possible + * to support CIF, QVGA and QCIF too. Taking values for ov7670 as a + * base and tweak them empirically could be required. + */ + { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .com7_bit = COM7_FMT_VGA, + .hstart = 158, /* These values from */ + .hstop = 14, /* Omnivision */ + .vstart = 14, /* Empirically determined */ + .vstop = 494, + .regs = NULL, + } +}; + +static void ov7675_get_framerate(struct v4l2_subdev *sd, + struct v4l2_fract *tpf) +{ + struct ov7670_info *info = to_state(sd); + u32 clkrc = info->clkrc; + int pll_factor; + + if (info->pll_bypass) + pll_factor = 1; + else + pll_factor = PLL_FACTOR; + + clkrc++; + if (info->fmt->mbus_code == V4L2_MBUS_FMT_SBGGR8_1X8) + clkrc = (clkrc >> 1); + + tpf->numerator = 1; + tpf->denominator = (5 * pll_factor * info->clock_speed) / + (4 * clkrc); +} + +static int ov7675_set_framerate(struct v4l2_subdev *sd, + struct v4l2_fract *tpf) +{ + struct ov7670_info *info = to_state(sd); + u32 clkrc; + int pll_factor; + int ret; + + /* + * The formula is fps = 5/4*pixclk for YUV/RGB and + * fps = 5/2*pixclk for RAW. + * + * pixclk = clock_speed / (clkrc + 1) * PLLfactor + * + */ + if (info->pll_bypass) { + pll_factor = 1; + ret = ov7670_write(sd, REG_DBLV, DBLV_BYPASS); + } else { + pll_factor = PLL_FACTOR; + ret = ov7670_write(sd, REG_DBLV, DBLV_X4); + } + if (ret < 0) + return ret; + + if (tpf->numerator == 0 || tpf->denominator == 0) { + clkrc = 0; + } else { + clkrc = (5 * pll_factor * info->clock_speed * tpf->numerator) / + (4 * tpf->denominator); + if (info->fmt->mbus_code == V4L2_MBUS_FMT_SBGGR8_1X8) + clkrc = (clkrc << 1); + clkrc--; + } + + /* + * The datasheet claims that clkrc = 0 will divide the input clock by 1 + * but we've checked with an oscilloscope that it divides by 2 instead. + * So, if clkrc = 0 just bypass the divider. + */ + if (clkrc <= 0) + clkrc = CLK_EXT; + else if (clkrc > CLK_SCALE) + clkrc = CLK_SCALE; + info->clkrc = clkrc; + + /* Recalculate frame rate */ + ov7675_get_framerate(sd, tpf); + + ret = ov7670_write(sd, REG_CLKRC, info->clkrc); + if (ret < 0) + return ret; + + return ov7670_write(sd, REG_DBLV, DBLV_X4); +} + +static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd, + struct v4l2_fract *tpf) +{ + struct ov7670_info *info = to_state(sd); + + tpf->numerator = 1; + tpf->denominator = info->clock_speed; + if ((info->clkrc & CLK_EXT) == 0 && (info->clkrc & CLK_SCALE) > 1) + tpf->denominator /= (info->clkrc & CLK_SCALE); +} + +static int ov7670_set_framerate_legacy(struct v4l2_subdev *sd, + struct v4l2_fract *tpf) +{ + struct ov7670_info *info = to_state(sd); + int div; + + if (tpf->numerator == 0 || tpf->denominator == 0) + div = 1; /* Reset to full rate */ + else + div = (tpf->numerator * info->clock_speed) / tpf->denominator; + if (div == 0) + div = 1; + else if (div > CLK_SCALE) + div = CLK_SCALE; + info->clkrc = (info->clkrc & 0x80) | div; + tpf->numerator = 1; + tpf->denominator = info->clock_speed / div; + return ov7670_write(sd, REG_CLKRC, info->clkrc); +} + +/* + * Store a set of start/stop values into the camera. + */ +static int ov7670_set_hw(struct v4l2_subdev *sd, int hstart, int hstop, + int vstart, int vstop) +{ + int ret; + unsigned char v; +/* + * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of + * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is + * a mystery "edge offset" value in the top two bits of href. + */ + ret = ov7670_write(sd, REG_HSTART, (hstart >> 3) & 0xff); + ret += ov7670_write(sd, REG_HSTOP, (hstop >> 3) & 0xff); + ret += ov7670_read(sd, REG_HREF, &v); + v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7); + msleep(10); + ret += ov7670_write(sd, REG_HREF, v); +/* + * Vertical: similar arrangement, but only 10 bits. + */ + ret += ov7670_write(sd, REG_VSTART, (vstart >> 2) & 0xff); + ret += ov7670_write(sd, REG_VSTOP, (vstop >> 2) & 0xff); + ret += ov7670_read(sd, REG_VREF, &v); + v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3); + msleep(10); + ret += ov7670_write(sd, REG_VREF, v); + return ret; +} + + +static int ov7670_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= N_OV7670_FMTS) + return -EINVAL; + + *code = ov7670_formats[index].mbus_code; + return 0; +} + +static int ov7670_try_fmt_internal(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt, + struct ov7670_format_struct **ret_fmt, + struct ov7670_win_size **ret_wsize) +{ + int index, i; + struct ov7670_win_size *wsize; + struct ov7670_info *info = to_state(sd); + unsigned int n_win_sizes = info->devtype->n_win_sizes; + unsigned int win_sizes_limit = n_win_sizes; + + for (index = 0; index < N_OV7670_FMTS; index++) + if (ov7670_formats[index].mbus_code == fmt->code) + break; + if (index >= N_OV7670_FMTS) { + /* default to first format */ + index = 0; + fmt->code = ov7670_formats[0].mbus_code; + } + if (ret_fmt != NULL) + *ret_fmt = ov7670_formats + index; + /* + * Fields: the OV devices claim to be progressive. + */ + fmt->field = V4L2_FIELD_NONE; + + /* + * Don't consider values that don't match min_height and min_width + * constraints. + */ + if (info->min_width || info->min_height) + for (i = 0; i < n_win_sizes; i++) { + wsize = info->devtype->win_sizes + i; + + if (wsize->width < info->min_width || + wsize->height < info->min_height) { + win_sizes_limit = i; + break; + } + } + /* + * Round requested image size down to the nearest + * we support, but not below the smallest. + */ + for (wsize = info->devtype->win_sizes; + wsize < info->devtype->win_sizes + win_sizes_limit; wsize++) + if (fmt->width >= wsize->width && fmt->height >= wsize->height) + break; + if (wsize >= info->devtype->win_sizes + win_sizes_limit) + wsize--; /* Take the smallest one */ + if (ret_wsize != NULL) + *ret_wsize = wsize; + /* + * Note the size we'll actually handle. + */ + fmt->width = wsize->width; + fmt->height = wsize->height; + fmt->colorspace = ov7670_formats[index].colorspace; + return 0; +} + +static int ov7670_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + return ov7670_try_fmt_internal(sd, fmt, NULL, NULL); +} + +/* + * Set a format. + */ +static int ov7670_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct ov7670_format_struct *ovfmt; + struct ov7670_win_size *wsize; + struct ov7670_info *info = to_state(sd); + unsigned char com7; + int ret; + + ret = ov7670_try_fmt_internal(sd, fmt, &ovfmt, &wsize); + + if (ret) + return ret; + /* + * COM7 is a pain in the ass, it doesn't like to be read then + * quickly written afterward. But we have everything we need + * to set it absolutely here, as long as the format-specific + * register sets list it first. + */ + com7 = ovfmt->regs[0].value; + com7 |= wsize->com7_bit; + ov7670_write(sd, REG_COM7, com7); + /* + * Now write the rest of the array. Also store start/stops + */ + ov7670_write_array(sd, ovfmt->regs + 1); + ov7670_set_hw(sd, wsize->hstart, wsize->hstop, wsize->vstart, + wsize->vstop); + ret = 0; + if (wsize->regs) + ret = ov7670_write_array(sd, wsize->regs); + info->fmt = ovfmt; + + /* + * If we're running RGB565, we must rewrite clkrc after setting + * the other parameters or the image looks poor. If we're *not* + * doing RGB565, we must not rewrite clkrc or the image looks + * *really* poor. + * + * (Update) Now that we retain clkrc state, we should be able + * to write it unconditionally, and that will make the frame + * rate persistent too. + */ + if (ret == 0) + ret = ov7670_write(sd, REG_CLKRC, info->clkrc); + return 0; +} + +/* + * Implement G/S_PARM. There is a "high quality" mode we could try + * to do someday; for now, we just do the frame rate tweak. + */ +static int ov7670_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + struct ov7670_info *info = to_state(sd); + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(struct v4l2_captureparm)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + info->devtype->get_framerate(sd, &cp->timeperframe); + + return 0; +} + +static int ov7670_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + struct ov7670_info *info = to_state(sd); + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + return info->devtype->set_framerate(sd, tpf); +} + + +/* + * Frame intervals. Since frame rates are controlled with the clock + * divider, we can only do 30/n for integer n values. So no continuous + * or stepwise options. Here we just pick a handful of logical values. + */ + +static int ov7670_frame_rates[] = { 30, 15, 10, 5, 1 }; + +static int ov7670_enum_frameintervals(struct v4l2_subdev *sd, + struct v4l2_frmivalenum *interval) +{ + if (interval->index >= ARRAY_SIZE(ov7670_frame_rates)) + return -EINVAL; + interval->type = V4L2_FRMIVAL_TYPE_DISCRETE; + interval->discrete.numerator = 1; + interval->discrete.denominator = ov7670_frame_rates[interval->index]; + return 0; +} + +/* + * Frame size enumeration + */ +static int ov7670_enum_framesizes(struct v4l2_subdev *sd, + struct v4l2_frmsizeenum *fsize) +{ + struct ov7670_info *info = to_state(sd); + int i; + int num_valid = -1; + __u32 index = fsize->index; + unsigned int n_win_sizes = info->devtype->n_win_sizes; + + /* + * If a minimum width/height was requested, filter out the capture + * windows that fall outside that. + */ + for (i = 0; i < n_win_sizes; i++) { + struct ov7670_win_size *win = &info->devtype->win_sizes[i]; + if (info->min_width && win->width < info->min_width) + continue; + if (info->min_height && win->height < info->min_height) + continue; + if (index == ++num_valid) { + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = win->width; + fsize->discrete.height = win->height; + return 0; + } + } + + return -EINVAL; +} + +/* + * Code for dealing with controls. + */ + +static int ov7670_store_cmatrix(struct v4l2_subdev *sd, + int matrix[CMATRIX_LEN]) +{ + int i, ret; + unsigned char signbits = 0; + + /* + * Weird crap seems to exist in the upper part of + * the sign bits register, so let's preserve it. + */ + ret = ov7670_read(sd, REG_CMATRIX_SIGN, &signbits); + signbits &= 0xc0; + + for (i = 0; i < CMATRIX_LEN; i++) { + unsigned char raw; + + if (matrix[i] < 0) { + signbits |= (1 << i); + if (matrix[i] < -255) + raw = 0xff; + else + raw = (-1 * matrix[i]) & 0xff; + } + else { + if (matrix[i] > 255) + raw = 0xff; + else + raw = matrix[i] & 0xff; + } + ret += ov7670_write(sd, REG_CMATRIX_BASE + i, raw); + } + ret += ov7670_write(sd, REG_CMATRIX_SIGN, signbits); + return ret; +} + + +/* + * Hue also requires messing with the color matrix. It also requires + * trig functions, which tend not to be well supported in the kernel. + * So here is a simple table of sine values, 0-90 degrees, in steps + * of five degrees. Values are multiplied by 1000. + * + * The following naive approximate trig functions require an argument + * carefully limited to -180 <= theta <= 180. + */ +#define SIN_STEP 5 +static const int ov7670_sin_table[] = { + 0, 87, 173, 258, 342, 422, + 499, 573, 642, 707, 766, 819, + 866, 906, 939, 965, 984, 996, + 1000 +}; + +static int ov7670_sine(int theta) +{ + int chs = 1; + int sine; + + if (theta < 0) { + theta = -theta; + chs = -1; + } + if (theta <= 90) + sine = ov7670_sin_table[theta/SIN_STEP]; + else { + theta -= 90; + sine = 1000 - ov7670_sin_table[theta/SIN_STEP]; + } + return sine*chs; +} + +static int ov7670_cosine(int theta) +{ + theta = 90 - theta; + if (theta > 180) + theta -= 360; + else if (theta < -180) + theta += 360; + return ov7670_sine(theta); +} + + + + +static void ov7670_calc_cmatrix(struct ov7670_info *info, + int matrix[CMATRIX_LEN], int sat, int hue) +{ + int i; + /* + * Apply the current saturation setting first. + */ + for (i = 0; i < CMATRIX_LEN; i++) + matrix[i] = (info->fmt->cmatrix[i] * sat) >> 7; + /* + * Then, if need be, rotate the hue value. + */ + if (hue != 0) { + int sinth, costh, tmpmatrix[CMATRIX_LEN]; + + memcpy(tmpmatrix, matrix, CMATRIX_LEN*sizeof(int)); + sinth = ov7670_sine(hue); + costh = ov7670_cosine(hue); + + matrix[0] = (matrix[3]*sinth + matrix[0]*costh)/1000; + matrix[1] = (matrix[4]*sinth + matrix[1]*costh)/1000; + matrix[2] = (matrix[5]*sinth + matrix[2]*costh)/1000; + matrix[3] = (matrix[3]*costh - matrix[0]*sinth)/1000; + matrix[4] = (matrix[4]*costh - matrix[1]*sinth)/1000; + matrix[5] = (matrix[5]*costh - matrix[2]*sinth)/1000; + } +} + + + +static int ov7670_s_sat_hue(struct v4l2_subdev *sd, int sat, int hue) +{ + struct ov7670_info *info = to_state(sd); + int matrix[CMATRIX_LEN]; + int ret; + + ov7670_calc_cmatrix(info, matrix, sat, hue); + ret = ov7670_store_cmatrix(sd, matrix); + return ret; +} + + +/* + * Some weird registers seem to store values in a sign/magnitude format! + */ + +static unsigned char ov7670_abs_to_sm(unsigned char v) +{ + if (v > 127) + return v & 0x7f; + return (128 - v) | 0x80; +} + +static int ov7670_s_brightness(struct v4l2_subdev *sd, int value) +{ + unsigned char com8 = 0, v; + int ret; + + ov7670_read(sd, REG_COM8, &com8); + com8 &= ~COM8_AEC; + ov7670_write(sd, REG_COM8, com8); + v = ov7670_abs_to_sm(value); + ret = ov7670_write(sd, REG_BRIGHT, v); + return ret; +} + +static int ov7670_s_contrast(struct v4l2_subdev *sd, int value) +{ + return ov7670_write(sd, REG_CONTRAS, (unsigned char) value); +} + +static int ov7670_s_hflip(struct v4l2_subdev *sd, int value) +{ + unsigned char v = 0; + int ret; + + ret = ov7670_read(sd, REG_MVFP, &v); + if (value) + v |= MVFP_MIRROR; + else + v &= ~MVFP_MIRROR; + msleep(10); /* FIXME */ + ret += ov7670_write(sd, REG_MVFP, v); + return ret; +} + +static int ov7670_s_vflip(struct v4l2_subdev *sd, int value) +{ + unsigned char v = 0; + int ret; + + ret = ov7670_read(sd, REG_MVFP, &v); + if (value) + v |= MVFP_FLIP; + else + v &= ~MVFP_FLIP; + msleep(10); /* FIXME */ + ret += ov7670_write(sd, REG_MVFP, v); + return ret; +} + +/* + * GAIN is split between REG_GAIN and REG_VREF[7:6]. If one believes + * the data sheet, the VREF parts should be the most significant, but + * experience shows otherwise. There seems to be little value in + * messing with the VREF bits, so we leave them alone. + */ +static int ov7670_g_gain(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char gain; + + ret = ov7670_read(sd, REG_GAIN, &gain); + *value = gain; + return ret; +} + +static int ov7670_s_gain(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com8; + + ret = ov7670_write(sd, REG_GAIN, value & 0xff); + /* Have to turn off AGC as well */ + if (ret == 0) { + ret = ov7670_read(sd, REG_COM8, &com8); + ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AGC); + } + return ret; +} + +/* + * Tweak autogain. + */ +static int ov7670_s_autogain(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com8; + + ret = ov7670_read(sd, REG_COM8, &com8); + if (ret == 0) { + if (value) + com8 |= COM8_AGC; + else + com8 &= ~COM8_AGC; + ret = ov7670_write(sd, REG_COM8, com8); + } + return ret; +} + +static int ov7670_s_exp(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com1, com8, aech, aechh; + + ret = ov7670_read(sd, REG_COM1, &com1) + + ov7670_read(sd, REG_COM8, &com8); + ov7670_read(sd, REG_AECHH, &aechh); + if (ret) + return ret; + + com1 = (com1 & 0xfc) | (value & 0x03); + aech = (value >> 2) & 0xff; + aechh = (aechh & 0xc0) | ((value >> 10) & 0x3f); + ret = ov7670_write(sd, REG_COM1, com1) + + ov7670_write(sd, REG_AECH, aech) + + ov7670_write(sd, REG_AECHH, aechh); + /* Have to turn off AEC as well */ + if (ret == 0) + ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AEC); + return ret; +} + +/* + * Tweak autoexposure. + */ +static int ov7670_s_autoexp(struct v4l2_subdev *sd, + enum v4l2_exposure_auto_type value) +{ + int ret; + unsigned char com8; + + ret = ov7670_read(sd, REG_COM8, &com8); + if (ret == 0) { + if (value == V4L2_EXPOSURE_AUTO) + com8 |= COM8_AEC; + else + com8 &= ~COM8_AEC; + ret = ov7670_write(sd, REG_COM8, com8); + } + return ret; +} + + +static int ov7670_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct ov7670_info *info = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + return ov7670_g_gain(sd, &info->gain->val); + } + return -EINVAL; +} + +static int ov7670_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct ov7670_info *info = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + return ov7670_s_brightness(sd, ctrl->val); + case V4L2_CID_CONTRAST: + return ov7670_s_contrast(sd, ctrl->val); + case V4L2_CID_SATURATION: + return ov7670_s_sat_hue(sd, + info->saturation->val, info->hue->val); + case V4L2_CID_VFLIP: + return ov7670_s_vflip(sd, ctrl->val); + case V4L2_CID_HFLIP: + return ov7670_s_hflip(sd, ctrl->val); + case V4L2_CID_AUTOGAIN: + /* Only set manual gain if auto gain is not explicitly + turned on. */ + if (!ctrl->val) { + /* ov7670_s_gain turns off auto gain */ + return ov7670_s_gain(sd, info->gain->val); + } + return ov7670_s_autogain(sd, ctrl->val); + case V4L2_CID_EXPOSURE_AUTO: + /* Only set manual exposure if auto exposure is not explicitly + turned on. */ + if (ctrl->val == V4L2_EXPOSURE_MANUAL) { + /* ov7670_s_exp turns off auto exposure */ + return ov7670_s_exp(sd, info->exposure->val); + } + return ov7670_s_autoexp(sd, ctrl->val); + } + return -EINVAL; +} + +static const struct v4l2_ctrl_ops ov7670_ctrl_ops = { + .s_ctrl = ov7670_s_ctrl, + .g_volatile_ctrl = ov7670_g_volatile_ctrl, +}; + +static int ov7670_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov7670_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + unsigned char val = 0; + int ret; + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + ret = ov7670_read(sd, reg->reg & 0xff, &val); + reg->val = val; + reg->size = 1; + return ret; +} + +static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + ov7670_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops ov7670_core_ops = { + .g_chip_ident = ov7670_g_chip_ident, + .reset = ov7670_reset, + .init = ov7670_init, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov7670_g_register, + .s_register = ov7670_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops ov7670_video_ops = { + .enum_mbus_fmt = ov7670_enum_mbus_fmt, + .try_mbus_fmt = ov7670_try_mbus_fmt, + .s_mbus_fmt = ov7670_s_mbus_fmt, + .s_parm = ov7670_s_parm, + .g_parm = ov7670_g_parm, + .enum_frameintervals = ov7670_enum_frameintervals, + .enum_framesizes = ov7670_enum_framesizes, +}; + +static const struct v4l2_subdev_ops ov7670_ops = { + .core = &ov7670_core_ops, + .video = &ov7670_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static const struct ov7670_devtype ov7670_devdata[] = { + [MODEL_OV7670] = { + .win_sizes = ov7670_win_sizes, + .n_win_sizes = ARRAY_SIZE(ov7670_win_sizes), + .set_framerate = ov7670_set_framerate_legacy, + .get_framerate = ov7670_get_framerate_legacy, + }, + [MODEL_OV7675] = { + .win_sizes = ov7675_win_sizes, + .n_win_sizes = ARRAY_SIZE(ov7675_win_sizes), + .set_framerate = ov7675_set_framerate, + .get_framerate = ov7675_get_framerate, + }, +}; + +static int ov7670_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_fract tpf; + struct v4l2_subdev *sd; + struct ov7670_info *info; + int ret; + + info = kzalloc(sizeof(struct ov7670_info), GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + sd = &info->sd; + v4l2_i2c_subdev_init(sd, client, &ov7670_ops); + + info->clock_speed = 30; /* default: a guess */ + if (client->dev.platform_data) { + struct ov7670_config *config = client->dev.platform_data; + + /* + * Must apply configuration before initializing device, because it + * selects I/O method. + */ + info->min_width = config->min_width; + info->min_height = config->min_height; + info->use_smbus = config->use_smbus; + + if (config->clock_speed) + info->clock_speed = config->clock_speed; + + /* + * It should be allowed for ov7670 too when it is migrated to + * the new frame rate formula. + */ + if (config->pll_bypass && id->driver_data != MODEL_OV7670) + info->pll_bypass = true; + + if (config->pclk_hb_disable) + info->pclk_hb_disable = true; + } + + /* Make sure it's an ov7670 */ + ret = ov7670_detect(sd); + if (ret) { + v4l_dbg(1, debug, client, + "chip found @ 0x%x (%s) is not an ov7670 chip.\n", + client->addr << 1, client->adapter->name); + kfree(info); + return ret; + } + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + info->devtype = &ov7670_devdata[id->driver_data]; + info->fmt = &ov7670_formats[0]; + info->clkrc = 0; + + /* Set default frame rate to 30 fps */ + tpf.numerator = 1; + tpf.denominator = 30; + info->devtype->set_framerate(sd, &tpf); + + if (info->pclk_hb_disable) + ov7670_write(sd, REG_COM10, COM10_PCLK_HB); + + v4l2_ctrl_handler_init(&info->hdl, 10); + v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + info->saturation = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_SATURATION, 0, 256, 1, 128); + info->hue = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_HUE, -180, 180, 5, 0); + info->gain = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_GAIN, 0, 255, 1, 128); + info->auto_gain = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + info->exposure = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_EXPOSURE, 0, 65535, 1, 500); + info->auto_exposure = v4l2_ctrl_new_std_menu(&info->hdl, &ov7670_ctrl_ops, + V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, 0, + V4L2_EXPOSURE_AUTO); + sd->ctrl_handler = &info->hdl; + if (info->hdl.error) { + int err = info->hdl.error; + + v4l2_ctrl_handler_free(&info->hdl); + kfree(info); + return err; + } + /* + * We have checked empirically that hw allows to read back the gain + * value chosen by auto gain but that's not the case for auto exposure. + */ + v4l2_ctrl_auto_cluster(2, &info->auto_gain, 0, true); + v4l2_ctrl_auto_cluster(2, &info->auto_exposure, + V4L2_EXPOSURE_MANUAL, false); + v4l2_ctrl_cluster(2, &info->saturation); + v4l2_ctrl_handler_setup(&info->hdl); + + return 0; +} + + +static int ov7670_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov7670_info *info = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&info->hdl); + kfree(info); + return 0; +} + +static const struct i2c_device_id ov7670_id[] = { + { "ov7670", MODEL_OV7670 }, + { "ov7675", MODEL_OV7675 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov7670_id); + +static struct i2c_driver ov7670_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ov7670", + }, + .probe = ov7670_probe, + .remove = ov7670_remove, + .id_table = ov7670_id, +}; + +module_i2c_driver(ov7670_driver); diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c new file mode 100644 index 00000000..1dbb8118 --- /dev/null +++ b/drivers/media/i2c/ov9650.c @@ -0,0 +1,1562 @@ +/* + * Omnivision OV9650/OV9652 CMOS Image Sensor driver + * + * Copyright (C) 2013, Sylwester Nawrocki + * + * Register definitions and initial settings based on a driver written + * by Vladimir Fonov. + * Copyright (c) 2010, Vladimir Fonov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +#define DRIVER_NAME "OV9650" + +/* + * OV9650/OV9652 register definitions + */ +#define REG_GAIN 0x00 /* Gain control, AGC[7:0] */ +#define REG_BLUE 0x01 /* AWB - Blue chanel gain */ +#define REG_RED 0x02 /* AWB - Red chanel gain */ +#define REG_VREF 0x03 /* [7:6] - AGC[9:8], [5:3]/[2:0] */ +#define VREF_GAIN_MASK 0xc0 /* - VREF end/start low 3 bits */ +#define REG_COM1 0x04 +#define COM1_CCIR656 0x40 +#define REG_B_AVE 0x05 +#define REG_GB_AVE 0x06 +#define REG_GR_AVE 0x07 +#define REG_R_AVE 0x08 +#define REG_COM2 0x09 +#define REG_PID 0x0a /* Product ID MSB */ +#define REG_VER 0x0b /* Product ID LSB */ +#define REG_COM3 0x0c +#define COM3_SWAP 0x40 +#define COM3_VARIOPIXEL1 0x04 +#define REG_COM4 0x0d /* Vario Pixels */ +#define COM4_VARIOPIXEL2 0x80 +#define REG_COM5 0x0e /* System clock options */ +#define COM5_SLAVE_MODE 0x10 +#define COM5_SYSTEMCLOCK48MHZ 0x80 +#define REG_COM6 0x0f /* HREF & ADBLC options */ +#define REG_AECH 0x10 /* Exposure value, AEC[9:2] */ +#define REG_CLKRC 0x11 /* Clock control */ +#define CLK_EXT 0x40 /* Use external clock directly */ +#define CLK_SCALE 0x3f /* Mask for internal clock scale */ +#define REG_COM7 0x12 /* SCCB reset, output format */ +#define COM7_RESET 0x80 +#define COM7_FMT_MASK 0x38 +#define COM7_FMT_VGA 0x40 +#define COM7_FMT_CIF 0x20 +#define COM7_FMT_QVGA 0x10 +#define COM7_FMT_QCIF 0x08 +#define COM7_RGB 0x04 +#define COM7_YUV 0x00 +#define COM7_BAYER 0x01 +#define COM7_PBAYER 0x05 +#define REG_COM8 0x13 /* AGC/AEC options */ +#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ +#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ +#define COM8_BFILT 0x20 /* Band filter enable */ +#define COM8_AGC 0x04 /* Auto gain enable */ +#define COM8_AWB 0x02 /* White balance enable */ +#define COM8_AEC 0x01 /* Auto exposure enable */ +#define REG_COM9 0x14 /* Gain ceiling */ +#define COM9_GAIN_CEIL_MASK 0x70 /* */ +#define REG_COM10 0x15 /* PCLK, HREF, HSYNC signals polarity */ +#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ +#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ +#define COM10_HREF_REV 0x08 /* Reverse HREF */ +#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ +#define COM10_VS_NEG 0x02 /* VSYNC negative */ +#define COM10_HS_NEG 0x01 /* HSYNC negative */ +#define REG_HSTART 0x17 /* Horiz start high bits */ +#define REG_HSTOP 0x18 /* Horiz stop high bits */ +#define REG_VSTART 0x19 /* Vert start high bits */ +#define REG_VSTOP 0x1a /* Vert stop high bits */ +#define REG_PSHFT 0x1b /* Pixel delay after HREF */ +#define REG_MIDH 0x1c /* Manufacturer ID MSB */ +#define REG_MIDL 0x1d /* Manufufacturer ID LSB */ +#define REG_MVFP 0x1e /* Image mirror/flip */ +#define MVFP_MIRROR 0x20 /* Mirror image */ +#define MVFP_FLIP 0x10 /* Vertical flip */ +#define REG_BOS 0x20 /* B channel Offset */ +#define REG_GBOS 0x21 /* Gb channel Offset */ +#define REG_GROS 0x22 /* Gr channel Offset */ +#define REG_ROS 0x23 /* R channel Offset */ +#define REG_AEW 0x24 /* AGC upper limit */ +#define REG_AEB 0x25 /* AGC lower limit */ +#define REG_VPT 0x26 /* AGC/AEC fast mode op region */ +#define REG_BBIAS 0x27 /* B channel output bias */ +#define REG_GBBIAS 0x28 /* Gb channel output bias */ +#define REG_GRCOM 0x29 /* Analog BLC & regulator */ +#define REG_EXHCH 0x2a /* Dummy pixel insert MSB */ +#define REG_EXHCL 0x2b /* Dummy pixel insert LSB */ +#define REG_RBIAS 0x2c /* R channel output bias */ +#define REG_ADVFL 0x2d /* LSB of dummy line insert */ +#define REG_ADVFH 0x2e /* MSB of dummy line insert */ +#define REG_YAVE 0x2f /* Y/G channel average value */ +#define REG_HSYST 0x30 /* HSYNC rising edge delay LSB*/ +#define REG_HSYEN 0x31 /* HSYNC falling edge delay LSB*/ +#define REG_HREF 0x32 /* HREF pieces */ +#define REG_CHLF 0x33 /* reserved */ +#define REG_ADC 0x37 /* reserved */ +#define REG_ACOM 0x38 /* reserved */ +#define REG_OFON 0x39 /* Power down register */ +#define OFON_PWRDN 0x08 /* Power down bit */ +#define REG_TSLB 0x3a /* YUVU format */ +#define TSLB_YUYV_MASK 0x0c /* UYVY or VYUY - see com13 */ +#define REG_COM11 0x3b /* Night mode, banding filter enable */ +#define COM11_NIGHT 0x80 /* Night mode enable */ +#define COM11_NMFR 0x60 /* Two bit NM frame rate */ +#define COM11_BANDING 0x01 /* Banding filter */ +#define COM11_AEC_REF_MASK 0x18 /* AEC reference area selection */ +#define REG_COM12 0x3c /* HREF option, UV average */ +#define COM12_HREF 0x80 /* HREF always */ +#define REG_COM13 0x3d /* Gamma selection, Color matrix en. */ +#define COM13_GAMMA 0x80 /* Gamma enable */ +#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ +#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ +#define REG_COM14 0x3e /* Edge enhancement options */ +#define COM14_EDGE_EN 0x02 +#define COM14_EEF_X2 0x01 +#define REG_EDGE 0x3f /* Edge enhancement factor */ +#define EDGE_FACTOR_MASK 0x0f +#define REG_COM15 0x40 /* Output range, RGB 555/565 */ +#define COM15_R10F0 0x00 /* Data range 10 to F0 */ +#define COM15_R01FE 0x80 /* 01 to FE */ +#define COM15_R00FF 0xc0 /* 00 to FF */ +#define COM15_RGB565 0x10 /* RGB565 output */ +#define COM15_RGB555 0x30 /* RGB555 output */ +#define COM15_SWAPRB 0x04 /* Swap R&B */ +#define REG_COM16 0x41 /* Color matrix coeff options */ +#define REG_COM17 0x42 /* Single frame out, banding filter */ +/* n = 1...9, 0x4f..0x57 */ +#define REG_MTX(__n) (0x4f + (__n) - 1) +#define REG_MTXS 0x58 +/* Lens Correction Option 1...5, __n = 0...5 */ +#define REG_LCC(__n) (0x62 + (__n) - 1) +#define LCC5_LCC_ENABLE 0x01 /* LCC5, enable lens correction */ +#define LCC5_LCC_COLOR 0x04 +#define REG_MANU 0x67 /* Manual U value */ +#define REG_MANV 0x68 /* Manual V value */ +#define REG_HV 0x69 /* Manual banding filter MSB */ +#define REG_MBD 0x6a /* Manual banding filter value */ +#define REG_DBLV 0x6b /* reserved */ +#define REG_GSP 0x6c /* Gamma curve */ +#define GSP_LEN 15 +#define REG_GST 0x7c /* Gamma curve */ +#define GST_LEN 15 +#define REG_COM21 0x8b +#define REG_COM22 0x8c /* Edge enhancement, denoising */ +#define COM22_WHTPCOR 0x02 /* White pixel correction enable */ +#define COM22_WHTPCOROPT 0x01 /* White pixel correction option */ +#define COM22_DENOISE 0x10 /* White pixel correction option */ +#define REG_COM23 0x8d /* Color bar test, color gain */ +#define COM23_TEST_MODE 0x10 +#define REG_DBLC1 0x8f /* Digital BLC */ +#define REG_DBLC_B 0x90 /* Digital BLC B channel offset */ +#define REG_DBLC_R 0x91 /* Digital BLC R channel offset */ +#define REG_DM_LNL 0x92 /* Dummy line low 8 bits */ +#define REG_DM_LNH 0x93 /* Dummy line high 8 bits */ +#define REG_LCCFB 0x9d /* Lens Correction B channel */ +#define REG_LCCFR 0x9e /* Lens Correction R channel */ +#define REG_DBLC_GB 0x9f /* Digital BLC GB chan offset */ +#define REG_DBLC_GR 0xa0 /* Digital BLC GR chan offset */ +#define REG_AECHM 0xa1 /* Exposure value - bits AEC[15:10] */ +#define REG_BD50ST 0xa2 /* Banding filter value for 50Hz */ +#define REG_BD60ST 0xa3 /* Banding filter value for 60Hz */ +#define REG_NULL 0xff /* Array end token */ + +#define DEF_CLKRC 0x80 + +#define OV965X_ID(_msb, _lsb) ((_msb) << 8 | (_lsb)) +#define OV9650_ID 0x9650 +#define OV9652_ID 0x9652 + +struct ov965x_ctrls { + struct v4l2_ctrl_handler handler; + struct { + struct v4l2_ctrl *auto_exp; + struct v4l2_ctrl *exposure; + }; + struct { + struct v4l2_ctrl *auto_wb; + struct v4l2_ctrl *blue_balance; + struct v4l2_ctrl *red_balance; + }; + struct { + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + }; + struct { + struct v4l2_ctrl *auto_gain; + struct v4l2_ctrl *gain; + }; + struct v4l2_ctrl *brightness; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *sharpness; + struct v4l2_ctrl *light_freq; + u8 update; +}; + +struct ov965x_framesize { + u16 width; + u16 height; + u16 max_exp_lines; + const u8 *regs; +}; + +struct ov965x_interval { + struct v4l2_fract interval; + /* Maximum resolution for this interval */ + struct v4l2_frmsize_discrete size; + u8 clkrc_div; +}; + +enum gpio_id { + GPIO_PWDN, + GPIO_RST, + NUM_GPIOS, +}; + +struct ov965x { + struct v4l2_subdev sd; + struct media_pad pad; + enum v4l2_mbus_type bus_type; + int gpios[NUM_GPIOS]; + /* External master clock frequency */ + unsigned long mclk_frequency; + + /* Protects the struct fields below */ + struct mutex lock; + + struct i2c_client *client; + + /* Exposure row interval in us */ + unsigned int exp_row_interval; + + unsigned short id; + const struct ov965x_framesize *frame_size; + /* YUYV sequence (pixel format) control register */ + u8 tslb_reg; + struct v4l2_mbus_framefmt format; + + struct ov965x_ctrls ctrls; + /* Pointer to frame rate control data structure */ + const struct ov965x_interval *fiv; + + int streaming; + int power; + + u8 apply_frame_fmt; +}; + +struct i2c_rv { + u8 addr; + u8 value; +}; + +static const struct i2c_rv ov965x_init_regs[] = { + { REG_COM2, 0x10 }, /* Set soft sleep mode */ + { REG_COM5, 0x00 }, /* System clock options */ + { REG_COM2, 0x01 }, /* Output drive, soft sleep mode */ + { REG_COM10, 0x00 }, /* Slave mode, HREF vs HSYNC, signals negate */ + { REG_EDGE, 0xa6 }, /* Edge enhancement treshhold and factor */ + { REG_COM16, 0x02 }, /* Color matrix coeff double option */ + { REG_COM17, 0x08 }, /* Single frame out, banding filter */ + { 0x16, 0x06 }, + { REG_CHLF, 0xc0 }, /* Reserved */ + { 0x34, 0xbf }, + { 0xa8, 0x80 }, + { 0x96, 0x04 }, + { 0x8e, 0x00 }, + { REG_COM12, 0x77 }, /* HREF option, UV average */ + { 0x8b, 0x06 }, + { 0x35, 0x91 }, + { 0x94, 0x88 }, + { 0x95, 0x88 }, + { REG_COM15, 0xc1 }, /* Output range, RGB 555/565 */ + { REG_GRCOM, 0x2f }, /* Analog BLC & regulator */ + { REG_COM6, 0x43 }, /* HREF & ADBLC options */ + { REG_COM8, 0xe5 }, /* AGC/AEC options */ + { REG_COM13, 0x90 }, /* Gamma selection, colour matrix, UV delay */ + { REG_HV, 0x80 }, /* Manual banding filter MSB */ + { 0x5c, 0x96 }, /* Reserved up to 0xa5 */ + { 0x5d, 0x96 }, + { 0x5e, 0x10 }, + { 0x59, 0xeb }, + { 0x5a, 0x9c }, + { 0x5b, 0x55 }, + { 0x43, 0xf0 }, + { 0x44, 0x10 }, + { 0x45, 0x55 }, + { 0x46, 0x86 }, + { 0x47, 0x64 }, + { 0x48, 0x86 }, + { 0x5f, 0xe0 }, + { 0x60, 0x8c }, + { 0x61, 0x20 }, + { 0xa5, 0xd9 }, + { 0xa4, 0x74 }, /* reserved */ + { REG_COM23, 0x02 }, /* Color gain analog/_digital_ */ + { REG_COM8, 0xe7 }, /* Enable AEC, AWB, AEC */ + { REG_COM22, 0x23 }, /* Edge enhancement, denoising */ + { 0xa9, 0xb8 }, + { 0xaa, 0x92 }, + { 0xab, 0x0a }, + { REG_DBLC1, 0xdf }, /* Digital BLC */ + { REG_DBLC_B, 0x00 }, /* Digital BLC B chan offset */ + { REG_DBLC_R, 0x00 }, /* Digital BLC R chan offset */ + { REG_DBLC_GB, 0x00 }, /* Digital BLC GB chan offset */ + { REG_DBLC_GR, 0x00 }, + { REG_COM9, 0x3a }, /* Gain ceiling 16x */ + { REG_NULL, 0 } +}; + +#define NUM_FMT_REGS 14 +/* + * COM7, COM3, COM4, HSTART, HSTOP, HREF, VSTART, VSTOP, VREF, + * EXHCH, EXHCL, ADC, OCOM, OFON + */ +static const u8 frame_size_reg_addr[NUM_FMT_REGS] = { + 0x12, 0x0c, 0x0d, 0x17, 0x18, 0x32, 0x19, 0x1a, 0x03, + 0x2a, 0x2b, 0x37, 0x38, 0x39, +}; + +static const u8 ov965x_sxga_regs[NUM_FMT_REGS] = { + 0x00, 0x00, 0x00, 0x1e, 0xbe, 0xbf, 0x01, 0x81, 0x12, + 0x10, 0x34, 0x81, 0x93, 0x51, +}; + +static const u8 ov965x_vga_regs[NUM_FMT_REGS] = { + 0x40, 0x04, 0x80, 0x26, 0xc6, 0xed, 0x01, 0x3d, 0x00, + 0x10, 0x40, 0x91, 0x12, 0x43, +}; + +/* Determined empirically. */ +static const u8 ov965x_qvga_regs[NUM_FMT_REGS] = { + 0x10, 0x04, 0x80, 0x25, 0xc5, 0xbf, 0x00, 0x80, 0x12, + 0x10, 0x40, 0x91, 0x12, 0x43, +}; + +static const struct ov965x_framesize ov965x_framesizes[] = { + { + .width = SXGA_WIDTH, + .height = SXGA_HEIGHT, + .regs = ov965x_sxga_regs, + .max_exp_lines = 1048, + }, { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .regs = ov965x_vga_regs, + .max_exp_lines = 498, + }, { + .width = QVGA_WIDTH, + .height = QVGA_HEIGHT, + .regs = ov965x_qvga_regs, + .max_exp_lines = 248, + }, +}; + +struct ov965x_pixfmt { + enum v4l2_mbus_pixelcode code; + u32 colorspace; + /* REG_TSLB value, only bits [3:2] may be set. */ + u8 tslb_reg; +}; + +static const struct ov965x_pixfmt ov965x_formats[] = { + { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 0x00}, + { V4L2_MBUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG, 0x04}, + { V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG, 0x0c}, + { V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG, 0x08}, +}; + +/* + * This table specifies possible frame resolution and interval + * combinations. Default CLKRC[5:0] divider values are valid + * only for 24 MHz external clock frequency. + */ +static struct ov965x_interval ov965x_intervals[] = { + {{ 100, 625 }, { SXGA_WIDTH, SXGA_HEIGHT }, 0 }, /* 6.25 fps */ + {{ 10, 125 }, { VGA_WIDTH, VGA_HEIGHT }, 1 }, /* 12.5 fps */ + {{ 10, 125 }, { QVGA_WIDTH, QVGA_HEIGHT }, 3 }, /* 12.5 fps */ + {{ 1, 25 }, { VGA_WIDTH, VGA_HEIGHT }, 0 }, /* 25 fps */ + {{ 1, 25 }, { QVGA_WIDTH, QVGA_HEIGHT }, 1 }, /* 25 fps */ +}; + +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ov965x, ctrls.handler)->sd; +} + +static inline struct ov965x *to_ov965x(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov965x, sd); +} + +static int ov965x_read(struct i2c_client *client, u8 addr, u8 *val) +{ + u8 buf = addr; + struct i2c_msg msg = { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &buf + }; + int ret; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret == 1) { + msg.flags = I2C_M_RD; + ret = i2c_transfer(client->adapter, &msg, 1); + + if (ret == 1) + *val = buf; + } + + v4l2_dbg(2, debug, client, "%s: 0x%02x @ 0x%02x. (%d)\n", + __func__, *val, addr, ret); + + return ret == 1 ? 0 : ret; +} + +static int ov965x_write(struct i2c_client *client, u8 addr, u8 val) +{ + u8 buf[2] = { addr, val }; + + int ret = i2c_master_send(client, buf, 2); + + v4l2_dbg(2, debug, client, "%s: 0x%02x @ 0x%02X (%d)\n", + __func__, val, addr, ret); + + return ret == 2 ? 0 : ret; +} + +static int ov965x_write_array(struct i2c_client *client, + const struct i2c_rv *regs) +{ + int i, ret = 0; + + for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++) + ret = ov965x_write(client, regs[i].addr, regs[i].value); + + return ret; +} + +static int ov965x_set_default_gamma_curve(struct ov965x *ov965x) +{ + static const u8 gamma_curve[] = { + /* Values taken from OV application note. */ + 0x40, 0x30, 0x4b, 0x60, 0x70, 0x70, 0x70, 0x70, + 0x60, 0x60, 0x50, 0x48, 0x3a, 0x2e, 0x28, 0x22, + 0x04, 0x07, 0x10, 0x28, 0x36, 0x44, 0x52, 0x60, + 0x6c, 0x78, 0x8c, 0x9e, 0xbb, 0xd2, 0xe6 + }; + u8 addr = REG_GSP; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gamma_curve); i++) { + int ret = ov965x_write(ov965x->client, addr, gamma_curve[i]); + if (ret < 0) + return ret; + addr++; + } + + return 0; +}; + +static int ov965x_set_color_matrix(struct ov965x *ov965x) +{ + static const u8 mtx[] = { + /* MTX1..MTX9, MTXS */ + 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38, 0x40, 0x40, 0x40, 0x0d + }; + u8 addr = REG_MTX(1); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(mtx); i++) { + int ret = ov965x_write(ov965x->client, addr, mtx[i]); + if (ret < 0) + return ret; + addr++; + } + + return 0; +} + +static void ov965x_gpio_set(int gpio, int val) +{ + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, val); +} + +static void __ov965x_set_power(struct ov965x *ov965x, int on) +{ + if (on) { + ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 0); + ov965x_gpio_set(ov965x->gpios[GPIO_RST], 0); + usleep_range(25000, 26000); + } else { + ov965x_gpio_set(ov965x->gpios[GPIO_RST], 1); + ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 1); + } + + ov965x->streaming = 0; +} + +static int ov965x_s_power(struct v4l2_subdev *sd, int on) +{ + struct ov965x *ov965x = to_ov965x(sd); + struct i2c_client *client = ov965x->client; + int ret = 0; + + v4l2_dbg(1, debug, client, "%s: on: %d\n", __func__, on); + + mutex_lock(&ov965x->lock); + if (ov965x->power == !on) { + __ov965x_set_power(ov965x, on); + if (on) { + ret = ov965x_write_array(client, + ov965x_init_regs); + ov965x->apply_frame_fmt = 1; + ov965x->ctrls.update = 1; + } + } + if (!ret) + ov965x->power += on ? 1 : -1; + + WARN_ON(ov965x->power < 0); + mutex_unlock(&ov965x->lock); + return ret; +} + +/* + * V4L2 controls + */ + +static void ov965x_update_exposure_ctrl(struct ov965x *ov965x) +{ + struct v4l2_ctrl *ctrl = ov965x->ctrls.exposure; + unsigned long fint, trow; + int min, max, def; + u8 clkrc; + + mutex_lock(&ov965x->lock); + if (WARN_ON(!ctrl || !ov965x->frame_size)) { + mutex_unlock(&ov965x->lock); + return; + } + clkrc = DEF_CLKRC + ov965x->fiv->clkrc_div; + /* Calculate internal clock frequency */ + fint = ov965x->mclk_frequency * ((clkrc >> 7) + 1) / + ((2 * ((clkrc & 0x3f) + 1))); + /* and the row interval (in us). */ + trow = (2 * 1520 * 1000000UL) / fint; + max = ov965x->frame_size->max_exp_lines * trow; + ov965x->exp_row_interval = trow; + mutex_unlock(&ov965x->lock); + + v4l2_dbg(1, debug, &ov965x->sd, "clkrc: %#x, fi: %lu, tr: %lu, %d\n", + clkrc, fint, trow, max); + + /* Update exposure time range to match current frame format. */ + min = (trow + 100) / 100; + max = (max - 100) / 100; + def = min + (max - min) / 2; + + if (v4l2_ctrl_modify_range(ctrl, min, max, 1, def)) + v4l2_err(&ov965x->sd, "Exposure ctrl range update failed\n"); +} + +static int ov965x_set_banding_filter(struct ov965x *ov965x, int value) +{ + unsigned long mbd, light_freq; + int ret; + u8 reg; + + ret = ov965x_read(ov965x->client, REG_COM8, ®); + if (!ret) { + if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED) + reg &= ~COM8_BFILT; + else + reg |= COM8_BFILT; + ret = ov965x_write(ov965x->client, REG_COM8, reg); + } + if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED) + return 0; + if (WARN_ON(ov965x->fiv == NULL)) + return -EINVAL; + /* Set minimal exposure time for 50/60 HZ lighting */ + if (value == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) + light_freq = 50; + else + light_freq = 60; + mbd = (1000UL * ov965x->fiv->interval.denominator * + ov965x->frame_size->max_exp_lines) / + ov965x->fiv->interval.numerator; + mbd = ((mbd / (light_freq * 2)) + 500) / 1000UL; + + return ov965x_write(ov965x->client, REG_MBD, mbd); +} + +static int ov965x_set_white_balance(struct ov965x *ov965x, int awb) +{ + int ret; + u8 reg; + + ret = ov965x_read(ov965x->client, REG_COM8, ®); + if (!ret) { + reg = awb ? reg | REG_COM8 : reg & ~REG_COM8; + ret = ov965x_write(ov965x->client, REG_COM8, reg); + } + if (!ret && !awb) { + ret = ov965x_write(ov965x->client, REG_BLUE, + ov965x->ctrls.blue_balance->val); + if (ret < 0) + return ret; + ret = ov965x_write(ov965x->client, REG_RED, + ov965x->ctrls.red_balance->val); + } + return ret; +} + +#define NUM_BR_LEVELS 7 +#define NUM_BR_REGS 3 + +static int ov965x_set_brightness(struct ov965x *ov965x, int val) +{ + static const u8 regs[NUM_BR_LEVELS + 1][NUM_BR_REGS] = { + { REG_AEW, REG_AEB, REG_VPT }, + { 0x1c, 0x12, 0x50 }, /* -3 */ + { 0x3d, 0x30, 0x71 }, /* -2 */ + { 0x50, 0x44, 0x92 }, /* -1 */ + { 0x70, 0x64, 0xc3 }, /* 0 */ + { 0x90, 0x84, 0xd4 }, /* +1 */ + { 0xc4, 0xbf, 0xf9 }, /* +2 */ + { 0xd8, 0xd0, 0xfa }, /* +3 */ + }; + int i, ret = 0; + + val += (NUM_BR_LEVELS / 2 + 1); + if (val > NUM_BR_LEVELS) + return -EINVAL; + + for (i = 0; i < NUM_BR_REGS && !ret; i++) + ret = ov965x_write(ov965x->client, regs[0][i], + regs[val][i]); + return ret; +} + +static int ov965x_set_gain(struct ov965x *ov965x, int auto_gain) +{ + struct i2c_client *client = ov965x->client; + struct ov965x_ctrls *ctrls = &ov965x->ctrls; + int ret = 0; + u8 reg; + /* + * For manual mode we need to disable AGC first, so + * gain value in REG_VREF, REG_GAIN is not overwritten. + */ + if (ctrls->auto_gain->is_new) { + ret = ov965x_read(client, REG_COM8, ®); + if (ret < 0) + return ret; + if (ctrls->auto_gain->val) + reg |= COM8_AGC; + else + reg &= ~COM8_AGC; + ret = ov965x_write(client, REG_COM8, reg); + if (ret < 0) + return ret; + } + + if (ctrls->gain->is_new && !auto_gain) { + unsigned int gain = ctrls->gain->val; + unsigned int rgain; + int m; + /* + * Convert gain control value to the sensor's gain + * registers (VREF[7:6], GAIN[7:0]) format. + */ + for (m = 6; m >= 0; m--) + if (gain >= (1 << m) * 16) + break; + rgain = (gain - ((1 << m) * 16)) / (1 << m); + rgain |= (((1 << m) - 1) << 4); + + ret = ov965x_write(client, REG_GAIN, rgain & 0xff); + if (ret < 0) + return ret; + ret = ov965x_read(client, REG_VREF, ®); + if (ret < 0) + return ret; + reg &= ~VREF_GAIN_MASK; + reg |= (((rgain >> 8) & 0x3) << 6); + ret = ov965x_write(client, REG_VREF, reg); + if (ret < 0) + return ret; + /* Return updated control's value to userspace */ + ctrls->gain->val = (1 << m) * (16 + (rgain & 0xf)); + } + + return ret; +} + +static int ov965x_set_sharpness(struct ov965x *ov965x, unsigned int value) +{ + u8 com14, edge; + int ret; + + ret = ov965x_read(ov965x->client, REG_COM14, &com14); + if (ret < 0) + return ret; + ret = ov965x_read(ov965x->client, REG_EDGE, &edge); + if (ret < 0) + return ret; + com14 = value ? com14 | COM14_EDGE_EN : com14 & ~COM14_EDGE_EN; + value--; + if (value > 0x0f) { + com14 |= COM14_EEF_X2; + value >>= 1; + } else { + com14 &= ~COM14_EEF_X2; + } + ret = ov965x_write(ov965x->client, REG_COM14, com14); + if (ret < 0) + return ret; + + edge &= ~EDGE_FACTOR_MASK; + edge |= ((u8)value & 0x0f); + + return ov965x_write(ov965x->client, REG_EDGE, edge); +} + +static int ov965x_set_exposure(struct ov965x *ov965x, int exp) +{ + struct i2c_client *client = ov965x->client; + struct ov965x_ctrls *ctrls = &ov965x->ctrls; + bool auto_exposure = (exp == V4L2_EXPOSURE_AUTO); + int ret; + u8 reg; + + if (ctrls->auto_exp->is_new) { + ret = ov965x_read(client, REG_COM8, ®); + if (ret < 0) + return ret; + if (auto_exposure) + reg |= (COM8_AEC | COM8_AGC); + else + reg &= ~(COM8_AEC | COM8_AGC); + ret = ov965x_write(client, REG_COM8, reg); + if (ret < 0) + return ret; + } + + if (!auto_exposure && ctrls->exposure->is_new) { + unsigned int exposure = (ctrls->exposure->val * 100) + / ov965x->exp_row_interval; + /* + * Manual exposure value + * [b15:b0] - AECHM (b15:b10), AECH (b9:b2), COM1 (b1:b0) + */ + ret = ov965x_write(client, REG_COM1, exposure & 0x3); + if (!ret) + ret = ov965x_write(client, REG_AECH, + (exposure >> 2) & 0xff); + if (!ret) + ret = ov965x_write(client, REG_AECHM, + (exposure >> 10) & 0x3f); + /* Update the value to minimize rounding errors */ + ctrls->exposure->val = ((exposure * ov965x->exp_row_interval) + + 50) / 100; + if (ret < 0) + return ret; + } + + v4l2_ctrl_activate(ov965x->ctrls.brightness, !exp); + return 0; +} + +static int ov965x_set_flip(struct ov965x *ov965x) +{ + u8 mvfp = 0; + + if (ov965x->ctrls.hflip->val) + mvfp |= MVFP_MIRROR; + + if (ov965x->ctrls.vflip->val) + mvfp |= MVFP_FLIP; + + return ov965x_write(ov965x->client, REG_MVFP, mvfp); +} + +#define NUM_SAT_LEVELS 5 +#define NUM_SAT_REGS 6 + +static int ov965x_set_saturation(struct ov965x *ov965x, int val) +{ + static const u8 regs[NUM_SAT_LEVELS][NUM_SAT_REGS] = { + /* MTX(1)...MTX(6) */ + { 0x1d, 0x1f, 0x02, 0x09, 0x13, 0x1c }, /* -2 */ + { 0x2e, 0x31, 0x02, 0x0e, 0x1e, 0x2d }, /* -1 */ + { 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38 }, /* 0 */ + { 0x46, 0x49, 0x04, 0x16, 0x2e, 0x43 }, /* +1 */ + { 0x57, 0x5c, 0x05, 0x1b, 0x39, 0x54 }, /* +2 */ + }; + u8 addr = REG_MTX(1); + int i, ret = 0; + + val += (NUM_SAT_LEVELS / 2); + if (val >= NUM_SAT_LEVELS) + return -EINVAL; + + for (i = 0; i < NUM_SAT_REGS && !ret; i++) + ret = ov965x_write(ov965x->client, addr + i, regs[val][i]); + + return ret; +} + +static int ov965x_set_test_pattern(struct ov965x *ov965x, int value) +{ + int ret; + u8 reg; + + ret = ov965x_read(ov965x->client, REG_COM23, ®); + if (ret < 0) + return ret; + reg = value ? reg | COM23_TEST_MODE : reg & ~COM23_TEST_MODE; + return ov965x_write(ov965x->client, REG_COM23, reg); +} + +static int __g_volatile_ctrl(struct ov965x *ov965x, struct v4l2_ctrl *ctrl) +{ + struct i2c_client *client = ov965x->client; + unsigned int exposure, gain, m; + u8 reg0, reg1, reg2; + int ret; + + if (!ov965x->power) + return 0; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + if (!ctrl->val) + return 0; + ret = ov965x_read(client, REG_GAIN, ®0); + if (ret < 0) + return ret; + ret = ov965x_read(client, REG_VREF, ®1); + if (ret < 0) + return ret; + gain = ((reg1 >> 6) << 8) | reg0; + m = 0x01 << fls(gain >> 4); + ov965x->ctrls.gain->val = m * (16 + (gain & 0xf)); + break; + + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->val == V4L2_EXPOSURE_MANUAL) + return 0; + ret = ov965x_read(client, REG_COM1, ®0); + if (!ret) + ret = ov965x_read(client, REG_AECH, ®1); + if (!ret) + ret = ov965x_read(client, REG_AECHM, ®2); + if (ret < 0) + return ret; + exposure = ((reg2 & 0x3f) << 10) | (reg1 << 2) | + (reg0 & 0x3); + ov965x->ctrls.exposure->val = ((exposure * + ov965x->exp_row_interval) + 50) / 100; + break; + } + + return 0; +} + +static int ov965x_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct ov965x *ov965x = to_ov965x(sd); + int ret; + + v4l2_dbg(1, debug, sd, "g_ctrl: %s\n", ctrl->name); + + mutex_lock(&ov965x->lock); + ret = __g_volatile_ctrl(ov965x, ctrl); + mutex_unlock(&ov965x->lock); + return ret; +} + +static int ov965x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct ov965x *ov965x = to_ov965x(sd); + int ret = -EINVAL; + + v4l2_dbg(1, debug, sd, "s_ctrl: %s, value: %d. power: %d\n", + ctrl->name, ctrl->val, ov965x->power); + + mutex_lock(&ov965x->lock); + /* + * If the device is not powered up now postpone applying control's + * value to the hardware, until it is ready to accept commands. + */ + if (ov965x->power == 0) { + mutex_unlock(&ov965x->lock); + return 0; + } + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = ov965x_set_white_balance(ov965x, ctrl->val); + break; + + case V4L2_CID_BRIGHTNESS: + ret = ov965x_set_brightness(ov965x, ctrl->val); + break; + + case V4L2_CID_EXPOSURE_AUTO: + ret = ov965x_set_exposure(ov965x, ctrl->val); + break; + + case V4L2_CID_AUTOGAIN: + ret = ov965x_set_gain(ov965x, ctrl->val); + break; + + case V4L2_CID_HFLIP: + ret = ov965x_set_flip(ov965x); + break; + + case V4L2_CID_POWER_LINE_FREQUENCY: + ret = ov965x_set_banding_filter(ov965x, ctrl->val); + break; + + case V4L2_CID_SATURATION: + ret = ov965x_set_saturation(ov965x, ctrl->val); + break; + + case V4L2_CID_SHARPNESS: + ret = ov965x_set_sharpness(ov965x, ctrl->val); + break; + + case V4L2_CID_TEST_PATTERN: + ret = ov965x_set_test_pattern(ov965x, ctrl->val); + break; + } + + mutex_unlock(&ov965x->lock); + return ret; +} + +static const struct v4l2_ctrl_ops ov965x_ctrl_ops = { + .g_volatile_ctrl = ov965x_g_volatile_ctrl, + .s_ctrl = ov965x_s_ctrl, +}; + +static const char * const test_pattern_menu[] = { + "Disabled", + "Color bars", + NULL +}; + +static int ov965x_initialize_controls(struct ov965x *ov965x) +{ + const struct v4l2_ctrl_ops *ops = &ov965x_ctrl_ops; + struct ov965x_ctrls *ctrls = &ov965x->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + int ret; + + ret = v4l2_ctrl_handler_init(hdl, 16); + if (ret < 0) + return ret; + + /* Auto/manual white balance */ + ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_AUTO_WHITE_BALANCE, + 0, 1, 1, 1); + ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE, + 0, 0xff, 1, 0x80); + ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE, + 0, 0xff, 1, 0x80); + /* Auto/manual exposure */ + ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_EXPOSURE_AUTO, + V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); + /* Exposure time, in 100 us units. min/max is updated dynamically. */ + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_EXPOSURE_ABSOLUTE, + 2, 1500, 1, 500); + /* Auto/manual gain */ + ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN, + 0, 1, 1, 1); + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, + 16, 64 * (16 + 15), 1, 64 * 16); + + ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, + -2, 2, 1, 0); + ctrls->brightness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, + -3, 3, 1, 0); + ctrls->sharpness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, + 0, 32, 1, 6); + + ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0); + ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0); + + ctrls->light_freq = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_POWER_LINE_FREQUENCY, + V4L2_CID_POWER_LINE_FREQUENCY_60HZ, ~0x7, + V4L2_CID_POWER_LINE_FREQUENCY_50HZ); + + v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(test_pattern_menu) - 1, 0, 0, + test_pattern_menu); + if (hdl->error) { + ret = hdl->error; + v4l2_ctrl_handler_free(hdl); + return ret; + } + + ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE; + ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE; + + v4l2_ctrl_auto_cluster(3, &ctrls->auto_wb, 0, false); + v4l2_ctrl_auto_cluster(3, &ctrls->auto_gain, 0, true); + v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 1, true); + v4l2_ctrl_cluster(2, &ctrls->hflip); + + ov965x->sd.ctrl_handler = hdl; + return 0; +} + +/* + * V4L2 subdev video and pad level operations + */ +static void ov965x_get_default_format(struct v4l2_mbus_framefmt *mf) +{ + mf->width = ov965x_framesizes[0].width; + mf->height = ov965x_framesizes[0].height; + mf->colorspace = ov965x_formats[0].colorspace; + mf->code = ov965x_formats[0].code; + mf->field = V4L2_FIELD_NONE; +} + +static int ov965x_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(ov965x_formats)) + return -EINVAL; + + code->code = ov965x_formats[code->index].code; + return 0; +} + +static int ov965x_enum_frame_sizes(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + int i = ARRAY_SIZE(ov965x_formats); + + if (fse->index > ARRAY_SIZE(ov965x_framesizes)) + return -EINVAL; + + while (--i) + if (fse->code == ov965x_formats[i].code) + break; + + fse->code = ov965x_formats[i].code; + + fse->min_width = ov965x_framesizes[fse->index].width; + fse->max_width = fse->min_width; + fse->max_height = ov965x_framesizes[fse->index].height; + fse->min_height = fse->max_height; + + return 0; +} + +static int ov965x_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct ov965x *ov965x = to_ov965x(sd); + + mutex_lock(&ov965x->lock); + fi->interval = ov965x->fiv->interval; + mutex_unlock(&ov965x->lock); + + return 0; +} + +static int __ov965x_set_frame_interval(struct ov965x *ov965x, + struct v4l2_subdev_frame_interval *fi) +{ + struct v4l2_mbus_framefmt *mbus_fmt = &ov965x->format; + const struct ov965x_interval *fiv = &ov965x_intervals[0]; + u64 req_int, err, min_err = ~0ULL; + unsigned int i; + + + if (fi->interval.denominator == 0) + return -EINVAL; + + req_int = (u64)(fi->interval.numerator * 10000) / + fi->interval.denominator; + + for (i = 0; i < ARRAY_SIZE(ov965x_intervals); i++) { + const struct ov965x_interval *iv = &ov965x_intervals[i]; + + if (mbus_fmt->width != iv->size.width || + mbus_fmt->height != iv->size.height) + continue; + err = abs64((u64)(iv->interval.numerator * 10000) / + iv->interval.denominator - req_int); + if (err < min_err) { + fiv = iv; + min_err = err; + } + } + ov965x->fiv = fiv; + + v4l2_dbg(1, debug, &ov965x->sd, "Changed frame interval to %u us\n", + fiv->interval.numerator * 1000000 / fiv->interval.denominator); + + return 0; +} + +static int ov965x_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct ov965x *ov965x = to_ov965x(sd); + int ret; + + v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n", + fi->interval.numerator, fi->interval.denominator); + + mutex_lock(&ov965x->lock); + ret = __ov965x_set_frame_interval(ov965x, fi); + ov965x->apply_frame_fmt = 1; + mutex_unlock(&ov965x->lock); + return ret; +} + +static int ov965x_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct ov965x *ov965x = to_ov965x(sd); + struct v4l2_mbus_framefmt *mf; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, 0); + fmt->format = *mf; + return 0; + } + + mutex_lock(&ov965x->lock); + fmt->format = ov965x->format; + mutex_unlock(&ov965x->lock); + + return 0; +} + +static void __ov965x_try_frame_size(struct v4l2_mbus_framefmt *mf, + const struct ov965x_framesize **size) +{ + const struct ov965x_framesize *fsize = &ov965x_framesizes[0], + *match = NULL; + int i = ARRAY_SIZE(ov965x_framesizes); + unsigned int min_err = UINT_MAX; + + while (i--) { + int err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + if (err < min_err) { + min_err = err; + match = fsize; + } + fsize++; + } + if (!match) + match = &ov965x_framesizes[0]; + mf->width = match->width; + mf->height = match->height; + if (size) + *size = match; +} + +static int ov965x_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + unsigned int index = ARRAY_SIZE(ov965x_formats); + struct v4l2_mbus_framefmt *mf = &fmt->format; + struct ov965x *ov965x = to_ov965x(sd); + const struct ov965x_framesize *size = NULL; + int ret = 0; + + __ov965x_try_frame_size(mf, &size); + + while (--index) + if (ov965x_formats[index].code == mf->code) + break; + + mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->code = ov965x_formats[index].code; + mf->field = V4L2_FIELD_NONE; + + mutex_lock(&ov965x->lock); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh != NULL) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + *mf = fmt->format; + } + } else { + if (ov965x->streaming) { + ret = -EBUSY; + } else { + ov965x->frame_size = size; + ov965x->format = fmt->format; + ov965x->tslb_reg = ov965x_formats[index].tslb_reg; + ov965x->apply_frame_fmt = 1; + } + } + + if (!ret && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + struct v4l2_subdev_frame_interval fiv = { + .interval = { 0, 1 } + }; + /* Reset to minimum possible frame interval */ + __ov965x_set_frame_interval(ov965x, &fiv); + } + mutex_unlock(&ov965x->lock); + + if (!ret) + ov965x_update_exposure_ctrl(ov965x); + + return ret; +} + +static int ov965x_set_frame_size(struct ov965x *ov965x) +{ + int i, ret = 0; + + for (i = 0; ret == 0 && i < NUM_FMT_REGS; i++) + ret = ov965x_write(ov965x->client, frame_size_reg_addr[i], + ov965x->frame_size->regs[i]); + return ret; +} + +static int __ov965x_set_params(struct ov965x *ov965x) +{ + struct i2c_client *client = ov965x->client; + struct ov965x_ctrls *ctrls = &ov965x->ctrls; + int ret = 0; + u8 reg; + + if (ov965x->apply_frame_fmt) { + reg = DEF_CLKRC + ov965x->fiv->clkrc_div; + ret = ov965x_write(client, REG_CLKRC, reg); + if (ret < 0) + return ret; + ret = ov965x_set_frame_size(ov965x); + if (ret < 0) + return ret; + ret = ov965x_read(client, REG_TSLB, ®); + if (ret < 0) + return ret; + reg &= ~TSLB_YUYV_MASK; + reg |= ov965x->tslb_reg; + ret = ov965x_write(client, REG_TSLB, reg); + if (ret < 0) + return ret; + } + ret = ov965x_set_default_gamma_curve(ov965x); + if (ret < 0) + return ret; + ret = ov965x_set_color_matrix(ov965x); + if (ret < 0) + return ret; + /* + * Select manual banding filter, the filter will + * be enabled further if required. + */ + ret = ov965x_read(client, REG_COM11, ®); + if (!ret) + reg |= COM11_BANDING; + ret = ov965x_write(client, REG_COM11, reg); + if (ret < 0) + return ret; + /* + * Banding filter (REG_MBD value) needs to match selected + * resolution and frame rate, so it's always updated here. + */ + return ov965x_set_banding_filter(ov965x, ctrls->light_freq->val); +} + +static int ov965x_s_stream(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov965x *ov965x = to_ov965x(sd); + struct ov965x_ctrls *ctrls = &ov965x->ctrls; + int ret = 0; + + v4l2_dbg(1, debug, client, "%s: on: %d\n", __func__, on); + + mutex_lock(&ov965x->lock); + if (ov965x->streaming == !on) { + if (on) + ret = __ov965x_set_params(ov965x); + + if (!ret && ctrls->update) { + /* + * ov965x_s_ctrl callback takes the mutex + * so it needs to be released here. + */ + mutex_unlock(&ov965x->lock); + ret = v4l2_ctrl_handler_setup(&ctrls->handler); + + mutex_lock(&ov965x->lock); + if (!ret) + ctrls->update = 0; + } + if (!ret) + ret = ov965x_write(client, REG_COM2, + on ? 0x01 : 0x11); + } + if (!ret) + ov965x->streaming += on ? 1 : -1; + + WARN_ON(ov965x->streaming < 0); + mutex_unlock(&ov965x->lock); + + return ret; +} + +/* + * V4L2 subdev internal operations + */ +static int ov965x_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(fh, 0); + + ov965x_get_default_format(mf); + return 0; +} + +static const struct v4l2_subdev_pad_ops ov965x_pad_ops = { + .enum_mbus_code = ov965x_enum_mbus_code, + .enum_frame_size = ov965x_enum_frame_sizes, + .get_fmt = ov965x_get_fmt, + .set_fmt = ov965x_set_fmt, +}; + +static const struct v4l2_subdev_video_ops ov965x_video_ops = { + .s_stream = ov965x_s_stream, + .g_frame_interval = ov965x_g_frame_interval, + .s_frame_interval = ov965x_s_frame_interval, + +}; + +static const struct v4l2_subdev_internal_ops ov965x_sd_internal_ops = { + .open = ov965x_open, +}; + +static const struct v4l2_subdev_core_ops ov965x_core_ops = { + .s_power = ov965x_s_power, + .log_status = v4l2_ctrl_subdev_log_status, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_ops ov965x_subdev_ops = { + .core = &ov965x_core_ops, + .pad = &ov965x_pad_ops, + .video = &ov965x_video_ops, +}; + +/* + * Reset and power down GPIOs configuration + */ +static int ov965x_configure_gpios(struct ov965x *ov965x, + const struct ov9650_platform_data *pdata) +{ + int ret, i; + + ov965x->gpios[GPIO_PWDN] = pdata->gpio_pwdn; + ov965x->gpios[GPIO_RST] = pdata->gpio_reset; + + for (i = 0; i < ARRAY_SIZE(ov965x->gpios); i++) { + int gpio = ov965x->gpios[i]; + + if (!gpio_is_valid(gpio)) + continue; + ret = devm_gpio_request_one(&ov965x->client->dev, gpio, + GPIOF_OUT_INIT_HIGH, "OV965X"); + if (ret < 0) + return ret; + v4l2_dbg(1, debug, &ov965x->sd, "set gpio %d to 1\n", gpio); + + gpio_set_value(gpio, 1); + gpio_export(gpio, 0); + ov965x->gpios[i] = gpio; + } + + return 0; +} + +static int ov965x_detect_sensor(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov965x *ov965x = to_ov965x(sd); + u8 pid, ver; + int ret; + + mutex_lock(&ov965x->lock); + __ov965x_set_power(ov965x, 1); + usleep_range(25000, 26000); + + /* Check sensor revision */ + ret = ov965x_read(client, REG_PID, &pid); + if (!ret) + ret = ov965x_read(client, REG_VER, &ver); + + __ov965x_set_power(ov965x, 0); + + if (!ret) { + ov965x->id = OV965X_ID(pid, ver); + if (ov965x->id == OV9650_ID || ov965x->id == OV9652_ID) { + v4l2_info(sd, "Found OV%04X sensor\n", ov965x->id); + } else { + v4l2_err(sd, "Sensor detection failed (%04X, %d)\n", + ov965x->id, ret); + ret = -ENODEV; + } + } + mutex_unlock(&ov965x->lock); + + return ret; +} + +static int ov965x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct ov9650_platform_data *pdata = client->dev.platform_data; + struct v4l2_subdev *sd; + struct ov965x *ov965x; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "platform data not specified\n"); + return -EINVAL; + } + + if (pdata->mclk_frequency == 0) { + dev_err(&client->dev, "MCLK frequency not specified\n"); + return -EINVAL; + } + + ov965x = devm_kzalloc(&client->dev, sizeof(*ov965x), GFP_KERNEL); + if (!ov965x) + return -ENOMEM; + + mutex_init(&ov965x->lock); + ov965x->client = client; + ov965x->mclk_frequency = pdata->mclk_frequency; + + sd = &ov965x->sd; + v4l2_i2c_subdev_init(sd, client, &ov965x_subdev_ops); + strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name)); + + sd->internal_ops = &ov965x_sd_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS; + + ret = ov965x_configure_gpios(ov965x, pdata); + if (ret < 0) + return ret; + + ov965x->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + ret = media_entity_init(&sd->entity, 1, &ov965x->pad, 0); + if (ret < 0) + return ret; + + ret = ov965x_initialize_controls(ov965x); + if (ret < 0) + goto err_me; + + ov965x_get_default_format(&ov965x->format); + ov965x->frame_size = &ov965x_framesizes[0]; + ov965x->fiv = &ov965x_intervals[0]; + + ret = ov965x_detect_sensor(sd); + if (ret < 0) + goto err_ctrls; + + /* Update exposure time min/max to match frame format */ + ov965x_update_exposure_ctrl(ov965x); + + return 0; +err_ctrls: + v4l2_ctrl_handler_free(sd->ctrl_handler); +err_me: + media_entity_cleanup(&sd->entity); + return ret; +} + +static int ov965x_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + media_entity_cleanup(&sd->entity); + + return 0; +} + +static const struct i2c_device_id ov965x_id[] = { + { "OV9650", 0 }, + { "OV9652", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, ov965x_id); + +static struct i2c_driver ov965x_i2c_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = ov965x_probe, + .remove = ov965x_remove, + .id_table = ov965x_id, +}; + +module_i2c_driver(ov965x_i2c_driver); + +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_DESCRIPTION("OV9650/OV9652 CMOS Image Sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/s5c73m3/Makefile b/drivers/media/i2c/s5c73m3/Makefile new file mode 100644 index 00000000..fa4df342 --- /dev/null +++ b/drivers/media/i2c/s5c73m3/Makefile @@ -0,0 +1,2 @@ +s5c73m3-objs := s5c73m3-core.o s5c73m3-spi.o s5c73m3-ctrls.o +obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3.o diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c new file mode 100644 index 00000000..9eac5310 --- /dev/null +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -0,0 +1,1715 @@ +/* + * Samsung LSI S5C73M3 8M pixel camera driver + * + * Copyright (C) 2012, Samsung Electronics, Co., Ltd. + * Sylwester Nawrocki + * Andrzej Hajda + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "s5c73m3.h" + +int s5c73m3_dbg; +module_param_named(debug, s5c73m3_dbg, int, 0644); + +static int boot_from_rom = 1; +module_param(boot_from_rom, int, 0644); + +static int update_fw; +module_param(update_fw, int, 0644); + +#define S5C73M3_EMBEDDED_DATA_MAXLEN SZ_4K + +static const char * const s5c73m3_supply_names[S5C73M3_MAX_SUPPLIES] = { + "vdd-int", /* Digital Core supply (1.2V), CAM_ISP_CORE_1.2V */ + "vdda", /* Analog Core supply (1.2V), CAM_SENSOR_CORE_1.2V */ + "vdd-reg", /* Regulator input supply (2.8V), CAM_SENSOR_A2.8V */ + "vddio-host", /* Digital Host I/O power supply (1.8V...2.8V), + CAM_ISP_SENSOR_1.8V */ + "vddio-cis", /* Digital CIS I/O power (1.2V...1.8V), + CAM_ISP_MIPI_1.2V */ + "vdd-af", /* Lens, CAM_AF_2.8V */ +}; + +static const struct s5c73m3_frame_size s5c73m3_isp_resolutions[] = { + { 320, 240, COMM_CHG_MODE_YUV_320_240 }, + { 352, 288, COMM_CHG_MODE_YUV_352_288 }, + { 640, 480, COMM_CHG_MODE_YUV_640_480 }, + { 880, 720, COMM_CHG_MODE_YUV_880_720 }, + { 960, 720, COMM_CHG_MODE_YUV_960_720 }, + { 1008, 672, COMM_CHG_MODE_YUV_1008_672 }, + { 1184, 666, COMM_CHG_MODE_YUV_1184_666 }, + { 1280, 720, COMM_CHG_MODE_YUV_1280_720 }, + { 1536, 864, COMM_CHG_MODE_YUV_1536_864 }, + { 1600, 1200, COMM_CHG_MODE_YUV_1600_1200 }, + { 1632, 1224, COMM_CHG_MODE_YUV_1632_1224 }, + { 1920, 1080, COMM_CHG_MODE_YUV_1920_1080 }, + { 1920, 1440, COMM_CHG_MODE_YUV_1920_1440 }, + { 2304, 1296, COMM_CHG_MODE_YUV_2304_1296 }, + { 3264, 2448, COMM_CHG_MODE_YUV_3264_2448 }, +}; + +static const struct s5c73m3_frame_size s5c73m3_jpeg_resolutions[] = { + { 640, 480, COMM_CHG_MODE_JPEG_640_480 }, + { 800, 450, COMM_CHG_MODE_JPEG_800_450 }, + { 800, 600, COMM_CHG_MODE_JPEG_800_600 }, + { 1024, 768, COMM_CHG_MODE_JPEG_1024_768 }, + { 1280, 720, COMM_CHG_MODE_JPEG_1280_720 }, + { 1280, 960, COMM_CHG_MODE_JPEG_1280_960 }, + { 1600, 900, COMM_CHG_MODE_JPEG_1600_900 }, + { 1600, 1200, COMM_CHG_MODE_JPEG_1600_1200 }, + { 2048, 1152, COMM_CHG_MODE_JPEG_2048_1152 }, + { 2048, 1536, COMM_CHG_MODE_JPEG_2048_1536 }, + { 2560, 1440, COMM_CHG_MODE_JPEG_2560_1440 }, + { 2560, 1920, COMM_CHG_MODE_JPEG_2560_1920 }, + { 3264, 1836, COMM_CHG_MODE_JPEG_3264_1836 }, + { 3264, 2176, COMM_CHG_MODE_JPEG_3264_2176 }, + { 3264, 2448, COMM_CHG_MODE_JPEG_3264_2448 }, +}; + +static const struct s5c73m3_frame_size * const s5c73m3_resolutions[] = { + [RES_ISP] = s5c73m3_isp_resolutions, + [RES_JPEG] = s5c73m3_jpeg_resolutions +}; + +static const int s5c73m3_resolutions_len[] = { + [RES_ISP] = ARRAY_SIZE(s5c73m3_isp_resolutions), + [RES_JPEG] = ARRAY_SIZE(s5c73m3_jpeg_resolutions) +}; + +static const struct s5c73m3_interval s5c73m3_intervals[] = { + { COMM_FRAME_RATE_FIXED_7FPS, {142857, 1000000}, {3264, 2448} }, + { COMM_FRAME_RATE_FIXED_15FPS, {66667, 1000000}, {3264, 2448} }, + { COMM_FRAME_RATE_FIXED_20FPS, {50000, 1000000}, {2304, 1296} }, + { COMM_FRAME_RATE_FIXED_30FPS, {33333, 1000000}, {2304, 1296} }, +}; + +#define S5C73M3_DEFAULT_FRAME_INTERVAL 3 /* 30 fps */ + +static void s5c73m3_fill_mbus_fmt(struct v4l2_mbus_framefmt *mf, + const struct s5c73m3_frame_size *fs, + u32 code) +{ + mf->width = fs->width; + mf->height = fs->height; + mf->code = code; + mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->field = V4L2_FIELD_NONE; +} + +static int s5c73m3_i2c_write(struct i2c_client *client, u16 addr, u16 data) +{ + u8 buf[4] = { addr >> 8, addr & 0xff, data >> 8, data & 0xff }; + + int ret = i2c_master_send(client, buf, sizeof(buf)); + + v4l_dbg(4, s5c73m3_dbg, client, "%s: addr 0x%04x, data 0x%04x\n", + __func__, addr, data); + + if (ret == 4) + return 0; + + return ret < 0 ? ret : -EREMOTEIO; +} + +static int s5c73m3_i2c_read(struct i2c_client *client, u16 addr, u16 *data) +{ + int ret; + u8 rbuf[2], wbuf[2] = { addr >> 8, addr & 0xff }; + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = 0, + .len = sizeof(wbuf), + .buf = wbuf + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = sizeof(rbuf), + .buf = rbuf + } + }; + /* + * Issue repeated START after writing 2 address bytes and + * just one STOP only after reading the data bytes. + */ + ret = i2c_transfer(client->adapter, msg, 2); + if (ret == 2) { + *data = be16_to_cpup((u16 *)rbuf); + v4l2_dbg(4, s5c73m3_dbg, client, + "%s: addr: 0x%04x, data: 0x%04x\n", + __func__, addr, *data); + return 0; + } + + v4l2_err(client, "I2C read failed: addr: %04x, (%d)\n", addr, ret); + + return ret >= 0 ? -EREMOTEIO : ret; +} + +int s5c73m3_write(struct s5c73m3 *state, u32 addr, u16 data) +{ + struct i2c_client *client = state->i2c_client; + int ret; + + if ((addr ^ state->i2c_write_address) & 0xffff0000) { + ret = s5c73m3_i2c_write(client, REG_CMDWR_ADDRH, addr >> 16); + if (ret < 0) { + state->i2c_write_address = 0; + return ret; + } + } + + if ((addr ^ state->i2c_write_address) & 0xffff) { + ret = s5c73m3_i2c_write(client, REG_CMDWR_ADDRL, addr & 0xffff); + if (ret < 0) { + state->i2c_write_address = 0; + return ret; + } + } + + state->i2c_write_address = addr; + + ret = s5c73m3_i2c_write(client, REG_CMDBUF_ADDR, data); + if (ret < 0) + return ret; + + state->i2c_write_address += 2; + + return ret; +} + +int s5c73m3_read(struct s5c73m3 *state, u32 addr, u16 *data) +{ + struct i2c_client *client = state->i2c_client; + int ret; + + if ((addr ^ state->i2c_read_address) & 0xffff0000) { + ret = s5c73m3_i2c_write(client, REG_CMDRD_ADDRH, addr >> 16); + if (ret < 0) { + state->i2c_read_address = 0; + return ret; + } + } + + if ((addr ^ state->i2c_read_address) & 0xffff) { + ret = s5c73m3_i2c_write(client, REG_CMDRD_ADDRL, addr & 0xffff); + if (ret < 0) { + state->i2c_read_address = 0; + return ret; + } + } + + state->i2c_read_address = addr; + + ret = s5c73m3_i2c_read(client, REG_CMDBUF_ADDR, data); + if (ret < 0) + return ret; + + state->i2c_read_address += 2; + + return ret; +} + +static int s5c73m3_check_status(struct s5c73m3 *state, unsigned int value) +{ + unsigned long start = jiffies; + unsigned long end = start + msecs_to_jiffies(2000); + int ret = 0; + u16 status; + int count = 0; + + while (time_is_after_jiffies(end)) { + ret = s5c73m3_read(state, REG_STATUS, &status); + if (ret < 0 || status == value) + break; + usleep_range(500, 1000); + ++count; + } + + if (count > 0) + v4l2_dbg(1, s5c73m3_dbg, &state->sensor_sd, + "status check took %dms\n", + jiffies_to_msecs(jiffies - start)); + + if (ret == 0 && status != value) { + u16 i2c_status = 0; + u16 i2c_seq_status = 0; + + s5c73m3_read(state, REG_I2C_STATUS, &i2c_status); + s5c73m3_read(state, REG_I2C_SEQ_STATUS, &i2c_seq_status); + + v4l2_err(&state->sensor_sd, + "wrong status %#x, expected: %#x, i2c_status: %#x/%#x\n", + status, value, i2c_status, i2c_seq_status); + + return -ETIMEDOUT; + } + + return ret; +} + +int s5c73m3_isp_command(struct s5c73m3 *state, u16 command, u16 data) +{ + int ret; + + ret = s5c73m3_check_status(state, REG_STATUS_ISP_COMMAND_COMPLETED); + if (ret < 0) + return ret; + + ret = s5c73m3_write(state, 0x00095000, command); + if (ret < 0) + return ret; + + ret = s5c73m3_write(state, 0x00095002, data); + if (ret < 0) + return ret; + + return s5c73m3_write(state, REG_STATUS, 0x0001); +} + +static int s5c73m3_isp_comm_result(struct s5c73m3 *state, u16 command, + u16 *data) +{ + return s5c73m3_read(state, COMM_RESULT_OFFSET + command, data); +} + +static int s5c73m3_set_af_softlanding(struct s5c73m3 *state) +{ + unsigned long start = jiffies; + u16 af_softlanding; + int count = 0; + int ret; + const char *msg; + + ret = s5c73m3_isp_command(state, COMM_AF_SOFTLANDING, + COMM_AF_SOFTLANDING_ON); + if (ret < 0) { + v4l2_info(&state->sensor_sd, "AF soft-landing failed\n"); + return ret; + } + + for (;;) { + ret = s5c73m3_isp_comm_result(state, COMM_AF_SOFTLANDING, + &af_softlanding); + if (ret < 0) { + msg = "failed"; + break; + } + if (af_softlanding == COMM_AF_SOFTLANDING_RES_COMPLETE) { + msg = "succeeded"; + break; + } + if (++count > 100) { + ret = -ETIME; + msg = "timed out"; + break; + } + msleep(25); + } + + v4l2_info(&state->sensor_sd, "AF soft-landing %s after %dms\n", + msg, jiffies_to_msecs(jiffies - start)); + + return ret; +} + +static int s5c73m3_load_fw(struct v4l2_subdev *sd) +{ + struct s5c73m3 *state = sensor_sd_to_s5c73m3(sd); + struct i2c_client *client = state->i2c_client; + const struct firmware *fw; + int ret; + char fw_name[20]; + + snprintf(fw_name, sizeof(fw_name), "SlimISP_%.2s.bin", + state->fw_file_version); + ret = request_firmware(&fw, fw_name, &client->dev); + if (ret < 0) { + v4l2_err(sd, "Firmware request failed (%s)\n", fw_name); + return -EINVAL; + } + + v4l2_info(sd, "Loading firmware (%s, %zu B)\n", fw_name, fw->size); + + ret = s5c73m3_spi_write(state, fw->data, fw->size, 64); + + if (ret >= 0) + state->isp_ready = 1; + else + v4l2_err(sd, "SPI write failed\n"); + + release_firmware(fw); + + return ret; +} + +static int s5c73m3_set_frame_size(struct s5c73m3 *state) +{ + const struct s5c73m3_frame_size *prev_size = + state->sensor_pix_size[RES_ISP]; + const struct s5c73m3_frame_size *cap_size = + state->sensor_pix_size[RES_JPEG]; + unsigned int chg_mode; + + v4l2_dbg(1, s5c73m3_dbg, &state->sensor_sd, + "Preview size: %dx%d, reg_val: 0x%x\n", + prev_size->width, prev_size->height, prev_size->reg_val); + + chg_mode = prev_size->reg_val | COMM_CHG_MODE_NEW; + + if (state->mbus_code == S5C73M3_JPEG_FMT) { + v4l2_dbg(1, s5c73m3_dbg, &state->sensor_sd, + "Capture size: %dx%d, reg_val: 0x%x\n", + cap_size->width, cap_size->height, cap_size->reg_val); + chg_mode |= cap_size->reg_val; + } + + return s5c73m3_isp_command(state, COMM_CHG_MODE, chg_mode); +} + +static int s5c73m3_set_frame_rate(struct s5c73m3 *state) +{ + int ret; + + if (state->ctrls.stabilization->val) + return 0; + + if (WARN_ON(state->fiv == NULL)) + return -EINVAL; + + ret = s5c73m3_isp_command(state, COMM_FRAME_RATE, state->fiv->fps_reg); + if (!ret) + state->apply_fiv = 0; + + return ret; +} + +static int __s5c73m3_s_stream(struct s5c73m3 *state, struct v4l2_subdev *sd, + int on) +{ + u16 mode; + int ret; + + if (on && state->apply_fmt) { + if (state->mbus_code == S5C73M3_JPEG_FMT) + mode = COMM_IMG_OUTPUT_INTERLEAVED; + else + mode = COMM_IMG_OUTPUT_YUV; + + ret = s5c73m3_isp_command(state, COMM_IMG_OUTPUT, mode); + if (!ret) + ret = s5c73m3_set_frame_size(state); + if (ret) + return ret; + state->apply_fmt = 0; + } + + ret = s5c73m3_isp_command(state, COMM_SENSOR_STREAMING, !!on); + if (ret) + return ret; + + state->streaming = !!on; + + if (!on) + return ret; + + if (state->apply_fiv) { + ret = s5c73m3_set_frame_rate(state); + if (ret < 0) + v4l2_err(sd, "Error setting frame rate(%d)\n", ret); + } + + return s5c73m3_check_status(state, REG_STATUS_ISP_COMMAND_COMPLETED); +} + +static int s5c73m3_oif_s_stream(struct v4l2_subdev *sd, int on) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + int ret; + + mutex_lock(&state->lock); + ret = __s5c73m3_s_stream(state, sd, on); + mutex_unlock(&state->lock); + + return ret; +} + +static int s5c73m3_system_status_wait(struct s5c73m3 *state, u32 value, + unsigned int delay, unsigned int steps) +{ + u16 reg = 0; + + while (steps-- > 0) { + int ret = s5c73m3_read(state, 0x30100010, ®); + if (ret < 0) + return ret; + if (reg == value) + return 0; + usleep_range(delay, delay + 25); + } + return -ETIMEDOUT; +} + +static int s5c73m3_read_fw_version(struct s5c73m3 *state) +{ + struct v4l2_subdev *sd = &state->sensor_sd; + int i, ret; + u16 data[2]; + int offset; + + offset = state->isp_ready ? 0x60 : 0; + + for (i = 0; i < S5C73M3_SENSOR_FW_LEN / 2; i++) { + ret = s5c73m3_read(state, offset + i * 2, data); + if (ret < 0) + return ret; + state->sensor_fw[i * 2] = (char)(*data & 0xff); + state->sensor_fw[i * 2 + 1] = (char)(*data >> 8); + } + state->sensor_fw[S5C73M3_SENSOR_FW_LEN] = '\0'; + + + for (i = 0; i < S5C73M3_SENSOR_TYPE_LEN / 2; i++) { + ret = s5c73m3_read(state, offset + 6 + i * 2, data); + if (ret < 0) + return ret; + state->sensor_type[i * 2] = (char)(*data & 0xff); + state->sensor_type[i * 2 + 1] = (char)(*data >> 8); + } + state->sensor_type[S5C73M3_SENSOR_TYPE_LEN] = '\0'; + + ret = s5c73m3_read(state, offset + 0x14, data); + if (ret >= 0) { + ret = s5c73m3_read(state, offset + 0x16, data + 1); + if (ret >= 0) + state->fw_size = data[0] + (data[1] << 16); + } + + v4l2_info(sd, "Sensor type: %s, FW version: %s\n", + state->sensor_type, state->sensor_fw); + return ret; +} + +static int s5c73m3_fw_update_from(struct s5c73m3 *state) +{ + struct v4l2_subdev *sd = &state->sensor_sd; + u16 status = COMM_FW_UPDATE_NOT_READY; + int ret; + int count = 0; + + v4l2_warn(sd, "Updating F-ROM firmware.\n"); + do { + if (status == COMM_FW_UPDATE_NOT_READY) { + ret = s5c73m3_isp_command(state, COMM_FW_UPDATE, 0); + if (ret < 0) + return ret; + } + + ret = s5c73m3_read(state, 0x00095906, &status); + if (ret < 0) + return ret; + switch (status) { + case COMM_FW_UPDATE_FAIL: + v4l2_warn(sd, "Updating F-ROM firmware failed.\n"); + return -EIO; + case COMM_FW_UPDATE_SUCCESS: + v4l2_warn(sd, "Updating F-ROM firmware finished.\n"); + return 0; + } + ++count; + msleep(20); + } while (count < 500); + + v4l2_warn(sd, "Updating F-ROM firmware timed-out.\n"); + return -ETIMEDOUT; +} + +static int s5c73m3_spi_boot(struct s5c73m3 *state, bool load_fw) +{ + struct v4l2_subdev *sd = &state->sensor_sd; + int ret; + + /* Run ARM MCU */ + ret = s5c73m3_write(state, 0x30000004, 0xffff); + if (ret < 0) + return ret; + + usleep_range(400, 500); + + /* Check booting status */ + ret = s5c73m3_system_status_wait(state, 0x0c, 100, 3); + if (ret < 0) { + v4l2_err(sd, "booting failed: %d\n", ret); + return ret; + } + + /* P,M,S and Boot Mode */ + ret = s5c73m3_write(state, 0x30100014, 0x2146); + if (ret < 0) + return ret; + + ret = s5c73m3_write(state, 0x30100010, 0x210c); + if (ret < 0) + return ret; + + usleep_range(200, 250); + + /* Check SPI status */ + ret = s5c73m3_system_status_wait(state, 0x210d, 100, 300); + if (ret < 0) + v4l2_err(sd, "SPI not ready: %d\n", ret); + + /* Firmware download over SPI */ + if (load_fw) + s5c73m3_load_fw(sd); + + /* MCU reset */ + ret = s5c73m3_write(state, 0x30000004, 0xfffd); + if (ret < 0) + return ret; + + /* Remap */ + ret = s5c73m3_write(state, 0x301000a4, 0x0183); + if (ret < 0) + return ret; + + /* MCU restart */ + ret = s5c73m3_write(state, 0x30000004, 0xffff); + if (ret < 0 || !load_fw) + return ret; + + ret = s5c73m3_read_fw_version(state); + if (ret < 0) + return ret; + + if (load_fw && update_fw) { + ret = s5c73m3_fw_update_from(state); + update_fw = 0; + } + + return ret; +} + +static int s5c73m3_set_timing_register_for_vdd(struct s5c73m3 *state) +{ + static const u32 regs[][2] = { + { 0x30100018, 0x0618 }, + { 0x3010001c, 0x10c1 }, + { 0x30100020, 0x249e } + }; + int ret; + int i; + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + ret = s5c73m3_write(state, regs[i][0], regs[i][1]); + if (ret < 0) + return ret; + } + + return 0; +} + +static void s5c73m3_set_fw_file_version(struct s5c73m3 *state) +{ + switch (state->sensor_fw[0]) { + case 'G': + case 'O': + state->fw_file_version[0] = 'G'; + break; + case 'S': + case 'Z': + state->fw_file_version[0] = 'Z'; + break; + } + + switch (state->sensor_fw[1]) { + case 'C'...'F': + state->fw_file_version[1] = state->sensor_fw[1]; + break; + } +} + +static int s5c73m3_get_fw_version(struct s5c73m3 *state) +{ + struct v4l2_subdev *sd = &state->sensor_sd; + int ret; + + /* Run ARM MCU */ + ret = s5c73m3_write(state, 0x30000004, 0xffff); + if (ret < 0) + return ret; + usleep_range(400, 500); + + /* Check booting status */ + ret = s5c73m3_system_status_wait(state, 0x0c, 100, 3); + if (ret < 0) { + + v4l2_err(sd, "%s: booting failed: %d\n", __func__, ret); + return ret; + } + + /* Change I/O Driver Current in order to read from F-ROM */ + ret = s5c73m3_write(state, 0x30100120, 0x0820); + ret = s5c73m3_write(state, 0x30100124, 0x0820); + + /* Offset Setting */ + ret = s5c73m3_write(state, 0x00010418, 0x0008); + + /* P,M,S and Boot Mode */ + ret = s5c73m3_write(state, 0x30100014, 0x2146); + if (ret < 0) + return ret; + ret = s5c73m3_write(state, 0x30100010, 0x230c); + if (ret < 0) + return ret; + + usleep_range(200, 250); + + /* Check SPI status */ + ret = s5c73m3_system_status_wait(state, 0x230e, 100, 300); + if (ret < 0) + v4l2_err(sd, "SPI not ready: %d\n", ret); + + /* ARM reset */ + ret = s5c73m3_write(state, 0x30000004, 0xfffd); + if (ret < 0) + return ret; + + /* Remap */ + ret = s5c73m3_write(state, 0x301000a4, 0x0183); + if (ret < 0) + return ret; + + s5c73m3_set_timing_register_for_vdd(state); + + ret = s5c73m3_read_fw_version(state); + + s5c73m3_set_fw_file_version(state); + + return ret; +} + +static int s5c73m3_rom_boot(struct s5c73m3 *state, bool load_fw) +{ + static const u32 boot_regs[][2] = { + { 0x3100010c, 0x0044 }, + { 0x31000108, 0x000d }, + { 0x31000304, 0x0001 }, + { 0x00010000, 0x5800 }, + { 0x00010002, 0x0002 }, + { 0x31000000, 0x0001 }, + { 0x30100014, 0x1b85 }, + { 0x30100010, 0x230c } + }; + struct v4l2_subdev *sd = &state->sensor_sd; + int i, ret; + + /* Run ARM MCU */ + ret = s5c73m3_write(state, 0x30000004, 0xffff); + if (ret < 0) + return ret; + usleep_range(400, 450); + + /* Check booting status */ + ret = s5c73m3_system_status_wait(state, 0x0c, 100, 4); + if (ret < 0) { + v4l2_err(sd, "Booting failed: %d\n", ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(boot_regs); i++) { + ret = s5c73m3_write(state, boot_regs[i][0], boot_regs[i][1]); + if (ret < 0) + return ret; + } + msleep(200); + + /* Check the binary read status */ + ret = s5c73m3_system_status_wait(state, 0x230e, 1000, 150); + if (ret < 0) { + v4l2_err(sd, "Binary read failed: %d\n", ret); + return ret; + } + + /* ARM reset */ + ret = s5c73m3_write(state, 0x30000004, 0xfffd); + if (ret < 0) + return ret; + /* Remap */ + ret = s5c73m3_write(state, 0x301000a4, 0x0183); + if (ret < 0) + return ret; + /* MCU re-start */ + ret = s5c73m3_write(state, 0x30000004, 0xffff); + if (ret < 0) + return ret; + + state->isp_ready = 1; + + return s5c73m3_read_fw_version(state); +} + +static int s5c73m3_isp_init(struct s5c73m3 *state) +{ + int ret; + + state->i2c_read_address = 0; + state->i2c_write_address = 0; + + ret = s5c73m3_i2c_write(state->i2c_client, AHB_MSB_ADDR_PTR, 0x3310); + if (ret < 0) + return ret; + + if (boot_from_rom) + return s5c73m3_rom_boot(state, true); + else + return s5c73m3_spi_boot(state, true); +} + +static const struct s5c73m3_frame_size *s5c73m3_find_frame_size( + struct v4l2_mbus_framefmt *fmt, + enum s5c73m3_resolution_types idx) +{ + const struct s5c73m3_frame_size *fs; + const struct s5c73m3_frame_size *best_fs; + int best_dist = INT_MAX; + int i; + + fs = s5c73m3_resolutions[idx]; + best_fs = NULL; + for (i = 0; i < s5c73m3_resolutions_len[idx]; ++i) { + int dist = abs(fs->width - fmt->width) + + abs(fs->height - fmt->height); + if (dist < best_dist) { + best_dist = dist; + best_fs = fs; + } + ++fs; + } + + return best_fs; +} + +static void s5c73m3_oif_try_format(struct s5c73m3 *state, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt, + const struct s5c73m3_frame_size **fs) +{ + u32 code; + + switch (fmt->pad) { + case OIF_ISP_PAD: + *fs = s5c73m3_find_frame_size(&fmt->format, RES_ISP); + code = S5C73M3_ISP_FMT; + break; + case OIF_JPEG_PAD: + *fs = s5c73m3_find_frame_size(&fmt->format, RES_JPEG); + code = S5C73M3_JPEG_FMT; + break; + case OIF_SOURCE_PAD: + default: + if (fmt->format.code == S5C73M3_JPEG_FMT) + code = S5C73M3_JPEG_FMT; + else + code = S5C73M3_ISP_FMT; + + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + *fs = state->oif_pix_size[RES_ISP]; + else + *fs = s5c73m3_find_frame_size( + v4l2_subdev_get_try_format(fh, + OIF_ISP_PAD), + RES_ISP); + break; + } + + s5c73m3_fill_mbus_fmt(&fmt->format, *fs, code); +} + +static void s5c73m3_try_format(struct s5c73m3 *state, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt, + const struct s5c73m3_frame_size **fs) +{ + u32 code; + + if (fmt->pad == S5C73M3_ISP_PAD) { + *fs = s5c73m3_find_frame_size(&fmt->format, RES_ISP); + code = S5C73M3_ISP_FMT; + } else { + *fs = s5c73m3_find_frame_size(&fmt->format, RES_JPEG); + code = S5C73M3_JPEG_FMT; + } + + s5c73m3_fill_mbus_fmt(&fmt->format, *fs, code); +} + +static int s5c73m3_oif_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + + if (fi->pad != OIF_SOURCE_PAD) + return -EINVAL; + + mutex_lock(&state->lock); + fi->interval = state->fiv->interval; + mutex_unlock(&state->lock); + + return 0; +} + +static int __s5c73m3_set_frame_interval(struct s5c73m3 *state, + struct v4l2_subdev_frame_interval *fi) +{ + const struct s5c73m3_frame_size *prev_size = + state->sensor_pix_size[RES_ISP]; + const struct s5c73m3_interval *fiv = &s5c73m3_intervals[0]; + unsigned int ret, min_err = UINT_MAX; + unsigned int i, fr_time; + + if (fi->interval.denominator == 0) + return -EINVAL; + + fr_time = fi->interval.numerator * 1000 / fi->interval.denominator; + + for (i = 0; i < ARRAY_SIZE(s5c73m3_intervals); i++) { + const struct s5c73m3_interval *iv = &s5c73m3_intervals[i]; + + if (prev_size->width > iv->size.width || + prev_size->height > iv->size.height) + continue; + + ret = abs(iv->interval.numerator / 1000 - fr_time); + if (ret < min_err) { + fiv = iv; + min_err = ret; + } + } + state->fiv = fiv; + + v4l2_dbg(1, s5c73m3_dbg, &state->sensor_sd, + "Changed frame interval to %u us\n", fiv->interval.numerator); + return 0; +} + +static int s5c73m3_oif_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + int ret; + + if (fi->pad != OIF_SOURCE_PAD) + return -EINVAL; + + v4l2_dbg(1, s5c73m3_dbg, sd, "Setting %d/%d frame interval\n", + fi->interval.numerator, fi->interval.denominator); + + mutex_lock(&state->lock); + + ret = __s5c73m3_set_frame_interval(state, fi); + if (!ret) { + if (state->streaming) + ret = s5c73m3_set_frame_rate(state); + else + state->apply_fiv = 1; + } + mutex_unlock(&state->lock); + return ret; +} + +static int s5c73m3_oif_enum_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_interval_enum *fie) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + const struct s5c73m3_interval *fi; + int ret = 0; + + if (fie->pad != OIF_SOURCE_PAD) + return -EINVAL; + if (fie->index >= ARRAY_SIZE(s5c73m3_intervals)) + return -EINVAL; + + mutex_lock(&state->lock); + fi = &s5c73m3_intervals[fie->index]; + if (fie->width > fi->size.width || fie->height > fi->size.height) + ret = -EINVAL; + else + fie->interval = fi->interval; + mutex_unlock(&state->lock); + + return ret; +} + +static int s5c73m3_oif_get_pad_code(int pad, int index) +{ + if (pad == OIF_SOURCE_PAD) { + if (index > 1) + return -EINVAL; + return (index == 0) ? S5C73M3_ISP_FMT : S5C73M3_JPEG_FMT; + } + + if (index > 0) + return -EINVAL; + + return (pad == OIF_ISP_PAD) ? S5C73M3_ISP_FMT : S5C73M3_JPEG_FMT; +} + +static int s5c73m3_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5c73m3 *state = sensor_sd_to_s5c73m3(sd); + const struct s5c73m3_frame_size *fs; + u32 code; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad); + return 0; + } + + mutex_lock(&state->lock); + + switch (fmt->pad) { + case S5C73M3_ISP_PAD: + code = S5C73M3_ISP_FMT; + fs = state->sensor_pix_size[RES_ISP]; + break; + case S5C73M3_JPEG_PAD: + code = S5C73M3_JPEG_FMT; + fs = state->sensor_pix_size[RES_JPEG]; + break; + default: + mutex_unlock(&state->lock); + return -EINVAL; + } + s5c73m3_fill_mbus_fmt(&fmt->format, fs, code); + + mutex_unlock(&state->lock); + return 0; +} + +static int s5c73m3_oif_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + const struct s5c73m3_frame_size *fs; + u32 code; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad); + return 0; + } + + mutex_lock(&state->lock); + + switch (fmt->pad) { + case OIF_ISP_PAD: + code = S5C73M3_ISP_FMT; + fs = state->oif_pix_size[RES_ISP]; + break; + case OIF_JPEG_PAD: + code = S5C73M3_JPEG_FMT; + fs = state->oif_pix_size[RES_JPEG]; + break; + case OIF_SOURCE_PAD: + code = state->mbus_code; + fs = state->oif_pix_size[RES_ISP]; + break; + default: + mutex_unlock(&state->lock); + return -EINVAL; + } + s5c73m3_fill_mbus_fmt(&fmt->format, fs, code); + + mutex_unlock(&state->lock); + return 0; +} + +static int s5c73m3_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + const struct s5c73m3_frame_size *frame_size = NULL; + struct s5c73m3 *state = sensor_sd_to_s5c73m3(sd); + struct v4l2_mbus_framefmt *mf; + int ret = 0; + + mutex_lock(&state->lock); + + s5c73m3_try_format(state, fh, fmt, &frame_size); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + *mf = fmt->format; + } else { + switch (fmt->pad) { + case S5C73M3_ISP_PAD: + state->sensor_pix_size[RES_ISP] = frame_size; + break; + case S5C73M3_JPEG_PAD: + state->sensor_pix_size[RES_JPEG] = frame_size; + break; + default: + ret = -EBUSY; + } + + if (state->streaming) + ret = -EBUSY; + else + state->apply_fmt = 1; + } + + mutex_unlock(&state->lock); + + return ret; +} + +static int s5c73m3_oif_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + const struct s5c73m3_frame_size *frame_size = NULL; + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + struct v4l2_mbus_framefmt *mf; + int ret = 0; + + mutex_lock(&state->lock); + + s5c73m3_oif_try_format(state, fh, fmt, &frame_size); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + *mf = fmt->format; + } else { + switch (fmt->pad) { + case OIF_ISP_PAD: + state->oif_pix_size[RES_ISP] = frame_size; + break; + case OIF_JPEG_PAD: + state->oif_pix_size[RES_JPEG] = frame_size; + break; + case OIF_SOURCE_PAD: + state->mbus_code = fmt->format.code; + break; + default: + ret = -EBUSY; + } + + if (state->streaming) + ret = -EBUSY; + else + state->apply_fmt = 1; + } + + mutex_unlock(&state->lock); + + return ret; +} + +static int s5c73m3_oif_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + int i; + + if (pad != OIF_SOURCE_PAD || fd == NULL) + return -EINVAL; + + mutex_lock(&state->lock); + fd->num_entries = 2; + for (i = 0; i < fd->num_entries; i++) + fd->entry[i] = state->frame_desc.entry[i]; + mutex_unlock(&state->lock); + + return 0; +} + +static int s5c73m3_oif_set_frame_desc(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + struct v4l2_mbus_frame_desc *frame_desc = &state->frame_desc; + int i; + + if (pad != OIF_SOURCE_PAD || fd == NULL) + return -EINVAL; + + fd->entry[0].length = 10 * SZ_1M; + fd->entry[1].length = max_t(u32, fd->entry[1].length, + S5C73M3_EMBEDDED_DATA_MAXLEN); + fd->num_entries = 2; + + mutex_lock(&state->lock); + for (i = 0; i < fd->num_entries; i++) + frame_desc->entry[i] = fd->entry[i]; + mutex_unlock(&state->lock); + + return 0; +} + +static int s5c73m3_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + static const int codes[] = { + [S5C73M3_ISP_PAD] = S5C73M3_ISP_FMT, + [S5C73M3_JPEG_PAD] = S5C73M3_JPEG_FMT}; + + if (code->index > 0 || code->pad >= S5C73M3_NUM_PADS) + return -EINVAL; + + code->code = codes[code->pad]; + + return 0; +} + +static int s5c73m3_oif_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + int ret; + + ret = s5c73m3_oif_get_pad_code(code->pad, code->index); + if (ret < 0) + return ret; + + code->code = ret; + + return 0; +} + +static int s5c73m3_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + int idx; + + if (fse->pad == S5C73M3_ISP_PAD) { + if (fse->code != S5C73M3_ISP_FMT) + return -EINVAL; + idx = RES_ISP; + } else{ + if (fse->code != S5C73M3_JPEG_FMT) + return -EINVAL; + idx = RES_JPEG; + } + + if (fse->index >= s5c73m3_resolutions_len[idx]) + return -EINVAL; + + fse->min_width = s5c73m3_resolutions[idx][fse->index].width; + fse->max_width = fse->min_width; + fse->max_height = s5c73m3_resolutions[idx][fse->index].height; + fse->min_height = fse->max_height; + + return 0; +} + +static int s5c73m3_oif_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + int idx; + + if (fse->pad == OIF_SOURCE_PAD) { + if (fse->index > 0) + return -EINVAL; + + switch (fse->code) { + case S5C73M3_JPEG_FMT: + case S5C73M3_ISP_FMT: { + struct v4l2_mbus_framefmt *mf = + v4l2_subdev_get_try_format(fh, OIF_ISP_PAD); + + fse->max_width = fse->min_width = mf->width; + fse->max_height = fse->min_height = mf->height; + return 0; + } + default: + return -EINVAL; + } + } + + if (fse->code != s5c73m3_oif_get_pad_code(fse->pad, 0)) + return -EINVAL; + + if (fse->pad == OIF_JPEG_PAD) + idx = RES_JPEG; + else + idx = RES_ISP; + + if (fse->index >= s5c73m3_resolutions_len[idx]) + return -EINVAL; + + fse->min_width = s5c73m3_resolutions[idx][fse->index].width; + fse->max_width = fse->min_width; + fse->max_height = s5c73m3_resolutions[idx][fse->index].height; + fse->min_height = fse->max_height; + + return 0; +} + +static int s5c73m3_oif_log_status(struct v4l2_subdev *sd) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + + v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name); + + v4l2_info(sd, "power: %d, apply_fmt: %d\n", state->power, + state->apply_fmt); + + return 0; +} + +static int s5c73m3_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *mf; + + mf = v4l2_subdev_get_try_format(fh, S5C73M3_ISP_PAD); + s5c73m3_fill_mbus_fmt(mf, &s5c73m3_isp_resolutions[1], + S5C73M3_ISP_FMT); + + mf = v4l2_subdev_get_try_format(fh, S5C73M3_JPEG_PAD); + s5c73m3_fill_mbus_fmt(mf, &s5c73m3_jpeg_resolutions[1], + S5C73M3_JPEG_FMT); + + return 0; +} + +static int s5c73m3_oif_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *mf; + + mf = v4l2_subdev_get_try_format(fh, OIF_ISP_PAD); + s5c73m3_fill_mbus_fmt(mf, &s5c73m3_isp_resolutions[1], + S5C73M3_ISP_FMT); + + mf = v4l2_subdev_get_try_format(fh, OIF_JPEG_PAD); + s5c73m3_fill_mbus_fmt(mf, &s5c73m3_jpeg_resolutions[1], + S5C73M3_JPEG_FMT); + + mf = v4l2_subdev_get_try_format(fh, OIF_SOURCE_PAD); + s5c73m3_fill_mbus_fmt(mf, &s5c73m3_isp_resolutions[1], + S5C73M3_ISP_FMT); + return 0; +} + +static int s5c73m3_gpio_set_value(struct s5c73m3 *priv, int id, u32 val) +{ + if (!gpio_is_valid(priv->gpio[id].gpio)) + return 0; + gpio_set_value(priv->gpio[id].gpio, !!val); + return 1; +} + +static int s5c73m3_gpio_assert(struct s5c73m3 *priv, int id) +{ + return s5c73m3_gpio_set_value(priv, id, priv->gpio[id].level); +} + +static int s5c73m3_gpio_deassert(struct s5c73m3 *priv, int id) +{ + return s5c73m3_gpio_set_value(priv, id, !priv->gpio[id].level); +} + +static int __s5c73m3_power_on(struct s5c73m3 *state) +{ + int i, ret; + + for (i = 0; i < S5C73M3_MAX_SUPPLIES; i++) { + ret = regulator_enable(state->supplies[i].consumer); + if (ret) + goto err; + } + + s5c73m3_gpio_deassert(state, STBY); + usleep_range(100, 200); + + s5c73m3_gpio_deassert(state, RST); + usleep_range(50, 100); + + return 0; +err: + for (--i; i >= 0; i--) + regulator_disable(state->supplies[i].consumer); + return ret; +} + +static int __s5c73m3_power_off(struct s5c73m3 *state) +{ + int i, ret; + + if (s5c73m3_gpio_assert(state, RST)) + usleep_range(10, 50); + + if (s5c73m3_gpio_assert(state, STBY)) + usleep_range(100, 200); + state->streaming = 0; + state->isp_ready = 0; + + for (i = S5C73M3_MAX_SUPPLIES - 1; i >= 0; i--) { + ret = regulator_disable(state->supplies[i].consumer); + if (ret) + goto err; + } + return 0; +err: + for (++i; i < S5C73M3_MAX_SUPPLIES; i++) + regulator_enable(state->supplies[i].consumer); + + return ret; +} + +static int s5c73m3_oif_set_power(struct v4l2_subdev *sd, int on) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + int ret = 0; + + mutex_lock(&state->lock); + + if (on && !state->power) { + ret = __s5c73m3_power_on(state); + if (!ret) + ret = s5c73m3_isp_init(state); + if (!ret) { + state->apply_fiv = 1; + state->apply_fmt = 1; + } + } else if (!on == state->power) { + ret = s5c73m3_set_af_softlanding(state); + if (!ret) + ret = __s5c73m3_power_off(state); + else + v4l2_err(sd, "Soft landing lens failed\n"); + } + if (!ret) + state->power += on ? 1 : -1; + + v4l2_dbg(1, s5c73m3_dbg, sd, "%s: power: %d\n", + __func__, state->power); + + mutex_unlock(&state->lock); + return ret; +} + +static int s5c73m3_oif_registered(struct v4l2_subdev *sd) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + int ret; + + ret = v4l2_device_register_subdev(sd->v4l2_dev, &state->sensor_sd); + if (ret) { + v4l2_err(sd->v4l2_dev, "Failed to register %s\n", + state->oif_sd.name); + return ret; + } + + ret = media_entity_create_link(&state->sensor_sd.entity, + S5C73M3_ISP_PAD, &state->oif_sd.entity, OIF_ISP_PAD, + MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); + + ret = media_entity_create_link(&state->sensor_sd.entity, + S5C73M3_JPEG_PAD, &state->oif_sd.entity, OIF_JPEG_PAD, + MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); + + mutex_lock(&state->lock); + ret = __s5c73m3_power_on(state); + if (ret == 0) + s5c73m3_get_fw_version(state); + + __s5c73m3_power_off(state); + mutex_unlock(&state->lock); + + v4l2_dbg(1, s5c73m3_dbg, sd, "%s: Booting %s (%d)\n", + __func__, ret ? "failed" : "succeded", ret); + + return ret; +} + +static void s5c73m3_oif_unregistered(struct v4l2_subdev *sd) +{ + struct s5c73m3 *state = oif_sd_to_s5c73m3(sd); + v4l2_device_unregister_subdev(&state->sensor_sd); +} + +static const struct v4l2_subdev_internal_ops s5c73m3_internal_ops = { + .open = s5c73m3_open, +}; + +static const struct v4l2_subdev_pad_ops s5c73m3_pad_ops = { + .enum_mbus_code = s5c73m3_enum_mbus_code, + .enum_frame_size = s5c73m3_enum_frame_size, + .get_fmt = s5c73m3_get_fmt, + .set_fmt = s5c73m3_set_fmt, +}; + +static const struct v4l2_subdev_ops s5c73m3_subdev_ops = { + .pad = &s5c73m3_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops oif_internal_ops = { + .registered = s5c73m3_oif_registered, + .unregistered = s5c73m3_oif_unregistered, + .open = s5c73m3_oif_open, +}; + +static const struct v4l2_subdev_pad_ops s5c73m3_oif_pad_ops = { + .enum_mbus_code = s5c73m3_oif_enum_mbus_code, + .enum_frame_size = s5c73m3_oif_enum_frame_size, + .enum_frame_interval = s5c73m3_oif_enum_frame_interval, + .get_fmt = s5c73m3_oif_get_fmt, + .set_fmt = s5c73m3_oif_set_fmt, + .get_frame_desc = s5c73m3_oif_get_frame_desc, + .set_frame_desc = s5c73m3_oif_set_frame_desc, +}; + +static const struct v4l2_subdev_core_ops s5c73m3_oif_core_ops = { + .s_power = s5c73m3_oif_set_power, + .log_status = s5c73m3_oif_log_status, +}; + +static const struct v4l2_subdev_video_ops s5c73m3_oif_video_ops = { + .s_stream = s5c73m3_oif_s_stream, + .g_frame_interval = s5c73m3_oif_g_frame_interval, + .s_frame_interval = s5c73m3_oif_s_frame_interval, +}; + +static const struct v4l2_subdev_ops oif_subdev_ops = { + .core = &s5c73m3_oif_core_ops, + .pad = &s5c73m3_oif_pad_ops, + .video = &s5c73m3_oif_video_ops, +}; + +static int s5c73m3_configure_gpio(int nr, int val, const char *name) +{ + unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + int ret; + + if (!gpio_is_valid(nr)) + return 0; + ret = gpio_request_one(nr, flags, name); + if (!ret) + gpio_export(nr, 0); + return ret; +} + +static int s5c73m3_free_gpios(struct s5c73m3 *state) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(state->gpio); i++) { + if (!gpio_is_valid(state->gpio[i].gpio)) + continue; + gpio_free(state->gpio[i].gpio); + state->gpio[i].gpio = -EINVAL; + } + return 0; +} + +static int s5c73m3_configure_gpios(struct s5c73m3 *state, + const struct s5c73m3_platform_data *pdata) +{ + const struct s5c73m3_gpio *gpio = &pdata->gpio_stby; + int ret; + + state->gpio[STBY].gpio = -EINVAL; + state->gpio[RST].gpio = -EINVAL; + + ret = s5c73m3_configure_gpio(gpio->gpio, gpio->level, "S5C73M3_STBY"); + if (ret) { + s5c73m3_free_gpios(state); + return ret; + } + state->gpio[STBY] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + gpio = &pdata->gpio_reset; + ret = s5c73m3_configure_gpio(gpio->gpio, gpio->level, "S5C73M3_RST"); + if (ret) { + s5c73m3_free_gpios(state); + return ret; + } + state->gpio[RST] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + return 0; +} + +static int s5c73m3_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + const struct s5c73m3_platform_data *pdata = client->dev.platform_data; + struct v4l2_subdev *sd; + struct v4l2_subdev *oif_sd; + struct s5c73m3 *state; + int ret, i; + + if (pdata == NULL) { + dev_err(&client->dev, "Platform data not specified\n"); + return -EINVAL; + } + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + mutex_init(&state->lock); + sd = &state->sensor_sd; + oif_sd = &state->oif_sd; + + v4l2_subdev_init(sd, &s5c73m3_subdev_ops); + sd->owner = client->driver->driver.owner; + v4l2_set_subdevdata(sd, state); + strlcpy(sd->name, "S5C73M3", sizeof(sd->name)); + + sd->internal_ops = &s5c73m3_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + state->sensor_pads[S5C73M3_JPEG_PAD].flags = MEDIA_PAD_FL_SOURCE; + state->sensor_pads[S5C73M3_ISP_PAD].flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV; + + ret = media_entity_init(&sd->entity, S5C73M3_NUM_PADS, + state->sensor_pads, 0); + if (ret < 0) + return ret; + + v4l2_i2c_subdev_init(oif_sd, client, &oif_subdev_ops); + strcpy(oif_sd->name, "S5C73M3-OIF"); + + oif_sd->internal_ops = &oif_internal_ops; + oif_sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + state->oif_pads[OIF_ISP_PAD].flags = MEDIA_PAD_FL_SINK; + state->oif_pads[OIF_JPEG_PAD].flags = MEDIA_PAD_FL_SINK; + state->oif_pads[OIF_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE; + oif_sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV; + + ret = media_entity_init(&oif_sd->entity, OIF_NUM_PADS, + state->oif_pads, 0); + if (ret < 0) + return ret; + + state->mclk_frequency = pdata->mclk_frequency; + state->bus_type = pdata->bus_type; + + ret = s5c73m3_configure_gpios(state, pdata); + if (ret) + goto out_err1; + + for (i = 0; i < S5C73M3_MAX_SUPPLIES; i++) + state->supplies[i].supply = s5c73m3_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, S5C73M3_MAX_SUPPLIES, + state->supplies); + if (ret) { + dev_err(dev, "failed to get regulators\n"); + goto out_err2; + } + + ret = s5c73m3_init_controls(state); + if (ret) + goto out_err2; + + state->sensor_pix_size[RES_ISP] = &s5c73m3_isp_resolutions[1]; + state->sensor_pix_size[RES_JPEG] = &s5c73m3_jpeg_resolutions[1]; + state->oif_pix_size[RES_ISP] = state->sensor_pix_size[RES_ISP]; + state->oif_pix_size[RES_JPEG] = state->sensor_pix_size[RES_JPEG]; + + state->mbus_code = S5C73M3_ISP_FMT; + + state->fiv = &s5c73m3_intervals[S5C73M3_DEFAULT_FRAME_INTERVAL]; + + state->fw_file_version[0] = 'G'; + state->fw_file_version[1] = 'C'; + + ret = s5c73m3_register_spi_driver(state); + if (ret < 0) + goto out_err2; + + state->i2c_client = client; + + v4l2_info(sd, "%s: completed succesfully\n", __func__); + return 0; + +out_err2: + s5c73m3_free_gpios(state); +out_err1: + media_entity_cleanup(&sd->entity); + return ret; +} + +static int s5c73m3_remove(struct i2c_client *client) +{ + struct v4l2_subdev *oif_sd = i2c_get_clientdata(client); + struct s5c73m3 *state = oif_sd_to_s5c73m3(oif_sd); + struct v4l2_subdev *sensor_sd = &state->sensor_sd; + + v4l2_device_unregister_subdev(oif_sd); + + v4l2_ctrl_handler_free(oif_sd->ctrl_handler); + media_entity_cleanup(&oif_sd->entity); + + v4l2_device_unregister_subdev(sensor_sd); + media_entity_cleanup(&sensor_sd->entity); + + s5c73m3_unregister_spi_driver(state); + s5c73m3_free_gpios(state); + + return 0; +} + +static const struct i2c_device_id s5c73m3_id[] = { + { DRIVER_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, s5c73m3_id); + +static struct i2c_driver s5c73m3_i2c_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = s5c73m3_probe, + .remove = s5c73m3_remove, + .id_table = s5c73m3_id, +}; + +module_i2c_driver(s5c73m3_i2c_driver); + +MODULE_DESCRIPTION("Samsung S5C73M3 camera driver"); +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-ctrls.c b/drivers/media/i2c/s5c73m3/s5c73m3-ctrls.c new file mode 100644 index 00000000..8001cde1 --- /dev/null +++ b/drivers/media/i2c/s5c73m3/s5c73m3-ctrls.c @@ -0,0 +1,563 @@ +/* + * Samsung LSI S5C73M3 8M pixel camera driver + * + * Copyright (C) 2012, Samsung Electronics, Co., Ltd. + * Sylwester Nawrocki + * Andrzej Hajda + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "s5c73m3.h" + +static int s5c73m3_get_af_status(struct s5c73m3 *state, struct v4l2_ctrl *ctrl) +{ + u16 reg = REG_AF_STATUS_UNFOCUSED; + + int ret = s5c73m3_read(state, REG_AF_STATUS, ®); + + switch (reg) { + case REG_CAF_STATUS_FIND_SEARCH_DIR: + case REG_AF_STATUS_FOCUSING: + case REG_CAF_STATUS_FOCUSING: + ctrl->val = V4L2_AUTO_FOCUS_STATUS_BUSY; + break; + case REG_CAF_STATUS_FOCUSED: + case REG_AF_STATUS_FOCUSED: + ctrl->val = V4L2_AUTO_FOCUS_STATUS_REACHED; + break; + default: + v4l2_info(&state->sensor_sd, "Unknown AF status %#x\n", reg); + /* Fall through */ + case REG_CAF_STATUS_UNFOCUSED: + case REG_AF_STATUS_UNFOCUSED: + case REG_AF_STATUS_INVALID: + ctrl->val = V4L2_AUTO_FOCUS_STATUS_FAILED; + break; + } + + return ret; +} + +static int s5c73m3_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sensor_sd(ctrl); + struct s5c73m3 *state = sensor_sd_to_s5c73m3(sd); + int ret; + + if (state->power == 0) + return -EBUSY; + + switch (ctrl->id) { + case V4L2_CID_FOCUS_AUTO: + ret = s5c73m3_get_af_status(state, state->ctrls.af_status); + if (ret) + return ret; + break; + } + + return 0; +} + +static int s5c73m3_set_colorfx(struct s5c73m3 *state, int val) +{ + static const unsigned short colorfx[][2] = { + { V4L2_COLORFX_NONE, COMM_IMAGE_EFFECT_NONE }, + { V4L2_COLORFX_BW, COMM_IMAGE_EFFECT_MONO }, + { V4L2_COLORFX_SEPIA, COMM_IMAGE_EFFECT_SEPIA }, + { V4L2_COLORFX_NEGATIVE, COMM_IMAGE_EFFECT_NEGATIVE }, + { V4L2_COLORFX_AQUA, COMM_IMAGE_EFFECT_AQUA }, + }; + int i; + + for (i = 0; i < ARRAY_SIZE(colorfx); i++) { + if (colorfx[i][0] != val) + continue; + + v4l2_dbg(1, s5c73m3_dbg, &state->sensor_sd, + "Setting %s color effect\n", + v4l2_ctrl_get_menu(state->ctrls.colorfx->id)[i]); + + return s5c73m3_isp_command(state, COMM_IMAGE_EFFECT, + colorfx[i][1]); + } + return -EINVAL; +} + +/* Set exposure metering/exposure bias */ +static int s5c73m3_set_exposure(struct s5c73m3 *state, int auto_exp) +{ + struct v4l2_subdev *sd = &state->sensor_sd; + struct s5c73m3_ctrls *ctrls = &state->ctrls; + int ret = 0; + + if (ctrls->exposure_metering->is_new) { + u16 metering; + + switch (ctrls->exposure_metering->val) { + case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED: + metering = COMM_METERING_CENTER; + break; + case V4L2_EXPOSURE_METERING_SPOT: + metering = COMM_METERING_SPOT; + break; + default: + metering = COMM_METERING_AVERAGE; + break; + } + + ret = s5c73m3_isp_command(state, COMM_METERING, metering); + } + + if (!ret && ctrls->exposure_bias->is_new) { + u16 exp_bias = ctrls->exposure_bias->val; + ret = s5c73m3_isp_command(state, COMM_EV, exp_bias); + } + + v4l2_dbg(1, s5c73m3_dbg, sd, + "%s: exposure bias: %#x, metering: %#x (%d)\n", __func__, + ctrls->exposure_bias->val, ctrls->exposure_metering->val, ret); + + return ret; +} + +static int s5c73m3_set_white_balance(struct s5c73m3 *state, int val) +{ + static const unsigned short wb[][2] = { + { V4L2_WHITE_BALANCE_INCANDESCENT, COMM_AWB_MODE_INCANDESCENT}, + { V4L2_WHITE_BALANCE_FLUORESCENT, COMM_AWB_MODE_FLUORESCENT1}, + { V4L2_WHITE_BALANCE_FLUORESCENT_H, COMM_AWB_MODE_FLUORESCENT2}, + { V4L2_WHITE_BALANCE_CLOUDY, COMM_AWB_MODE_CLOUDY}, + { V4L2_WHITE_BALANCE_DAYLIGHT, COMM_AWB_MODE_DAYLIGHT}, + { V4L2_WHITE_BALANCE_AUTO, COMM_AWB_MODE_AUTO}, + }; + int i; + + for (i = 0; i < ARRAY_SIZE(wb); i++) { + if (wb[i][0] != val) + continue; + + v4l2_dbg(1, s5c73m3_dbg, &state->sensor_sd, + "Setting white balance to: %s\n", + v4l2_ctrl_get_menu(state->ctrls.auto_wb->id)[i]); + + return s5c73m3_isp_command(state, COMM_AWB_MODE, wb[i][1]); + } + + return -EINVAL; +} + +static int s5c73m3_af_run(struct s5c73m3 *state, bool on) +{ + struct s5c73m3_ctrls *c = &state->ctrls; + + if (!on) + return s5c73m3_isp_command(state, COMM_AF_CON, + COMM_AF_CON_STOP); + + if (c->focus_auto->val) + return s5c73m3_isp_command(state, COMM_AF_MODE, + COMM_AF_MODE_PREVIEW_CAF_START); + + return s5c73m3_isp_command(state, COMM_AF_CON, COMM_AF_CON_START); +} + +static int s5c73m3_3a_lock(struct s5c73m3 *state, struct v4l2_ctrl *ctrl) +{ + bool awb_lock = ctrl->val & V4L2_LOCK_WHITE_BALANCE; + bool ae_lock = ctrl->val & V4L2_LOCK_EXPOSURE; + bool af_lock = ctrl->val & V4L2_LOCK_FOCUS; + int ret = 0; + + if ((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_EXPOSURE) { + ret = s5c73m3_isp_command(state, COMM_AE_CON, + ae_lock ? COMM_AE_STOP : COMM_AE_START); + if (ret) + return ret; + } + + if (((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_WHITE_BALANCE) + && state->ctrls.auto_wb->val) { + ret = s5c73m3_isp_command(state, COMM_AWB_CON, + awb_lock ? COMM_AWB_STOP : COMM_AWB_START); + if (ret) + return ret; + } + + if ((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_FOCUS) + ret = s5c73m3_af_run(state, ~af_lock); + + return ret; +} + +static int s5c73m3_set_auto_focus(struct s5c73m3 *state, int caf) +{ + struct s5c73m3_ctrls *c = &state->ctrls; + int ret = 1; + + if (c->af_distance->is_new) { + u16 mode = (c->af_distance->val == V4L2_AUTO_FOCUS_RANGE_MACRO) + ? COMM_AF_MODE_MACRO : COMM_AF_MODE_NORMAL; + ret = s5c73m3_isp_command(state, COMM_AF_MODE, mode); + if (ret != 0) + return ret; + } + + if (!ret || (c->focus_auto->is_new && c->focus_auto->val) || + c->af_start->is_new) + ret = s5c73m3_af_run(state, 1); + else if ((c->focus_auto->is_new && !c->focus_auto->val) || + c->af_stop->is_new) + ret = s5c73m3_af_run(state, 0); + else + ret = 0; + + return ret; +} + +static int s5c73m3_set_contrast(struct s5c73m3 *state, int val) +{ + u16 reg = (val < 0) ? -val + 2 : val; + return s5c73m3_isp_command(state, COMM_CONTRAST, reg); +} + +static int s5c73m3_set_saturation(struct s5c73m3 *state, int val) +{ + u16 reg = (val < 0) ? -val + 2 : val; + return s5c73m3_isp_command(state, COMM_SATURATION, reg); +} + +static int s5c73m3_set_sharpness(struct s5c73m3 *state, int val) +{ + u16 reg = (val < 0) ? -val + 2 : val; + return s5c73m3_isp_command(state, COMM_SHARPNESS, reg); +} + +static int s5c73m3_set_iso(struct s5c73m3 *state, int val) +{ + u32 iso; + + if (val == V4L2_ISO_SENSITIVITY_MANUAL) + iso = state->ctrls.iso->val + 1; + else + iso = 0; + + return s5c73m3_isp_command(state, COMM_ISO, iso); +} + +static int s5c73m3_set_stabilization(struct s5c73m3 *state, int val) +{ + struct v4l2_subdev *sd = &state->sensor_sd; + + v4l2_dbg(1, s5c73m3_dbg, sd, "Image stabilization: %d\n", val); + + return s5c73m3_isp_command(state, COMM_FRAME_RATE, val ? + COMM_FRAME_RATE_ANTI_SHAKE : COMM_FRAME_RATE_AUTO_SET); +} + +static int s5c73m3_set_jpeg_quality(struct s5c73m3 *state, int quality) +{ + int reg; + + if (quality <= 65) + reg = COMM_IMAGE_QUALITY_NORMAL; + else if (quality <= 75) + reg = COMM_IMAGE_QUALITY_FINE; + else + reg = COMM_IMAGE_QUALITY_SUPERFINE; + + return s5c73m3_isp_command(state, COMM_IMAGE_QUALITY, reg); +} + +static int s5c73m3_set_scene_program(struct s5c73m3 *state, int val) +{ + static const unsigned short scene_lookup[] = { + COMM_SCENE_MODE_NONE, /* V4L2_SCENE_MODE_NONE */ + COMM_SCENE_MODE_AGAINST_LIGHT,/* V4L2_SCENE_MODE_BACKLIGHT */ + COMM_SCENE_MODE_BEACH, /* V4L2_SCENE_MODE_BEACH_SNOW */ + COMM_SCENE_MODE_CANDLE, /* V4L2_SCENE_MODE_CANDLE_LIGHT */ + COMM_SCENE_MODE_DAWN, /* V4L2_SCENE_MODE_DAWN_DUSK */ + COMM_SCENE_MODE_FALL, /* V4L2_SCENE_MODE_FALL_COLORS */ + COMM_SCENE_MODE_FIRE, /* V4L2_SCENE_MODE_FIREWORKS */ + COMM_SCENE_MODE_LANDSCAPE, /* V4L2_SCENE_MODE_LANDSCAPE */ + COMM_SCENE_MODE_NIGHT, /* V4L2_SCENE_MODE_NIGHT */ + COMM_SCENE_MODE_INDOOR, /* V4L2_SCENE_MODE_PARTY_INDOOR */ + COMM_SCENE_MODE_PORTRAIT, /* V4L2_SCENE_MODE_PORTRAIT */ + COMM_SCENE_MODE_SPORTS, /* V4L2_SCENE_MODE_SPORTS */ + COMM_SCENE_MODE_SUNSET, /* V4L2_SCENE_MODE_SUNSET */ + COMM_SCENE_MODE_TEXT, /* V4L2_SCENE_MODE_TEXT */ + }; + + v4l2_dbg(1, s5c73m3_dbg, &state->sensor_sd, "Setting %s scene mode\n", + v4l2_ctrl_get_menu(state->ctrls.scene_mode->id)[val]); + + return s5c73m3_isp_command(state, COMM_SCENE_MODE, scene_lookup[val]); +} + +static int s5c73m3_set_power_line_freq(struct s5c73m3 *state, int val) +{ + unsigned int pwr_line_freq = COMM_FLICKER_NONE; + + switch (val) { + case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED: + pwr_line_freq = COMM_FLICKER_NONE; + break; + case V4L2_CID_POWER_LINE_FREQUENCY_50HZ: + pwr_line_freq = COMM_FLICKER_AUTO_50HZ; + break; + case V4L2_CID_POWER_LINE_FREQUENCY_60HZ: + pwr_line_freq = COMM_FLICKER_AUTO_60HZ; + break; + default: + case V4L2_CID_POWER_LINE_FREQUENCY_AUTO: + pwr_line_freq = COMM_FLICKER_NONE; + } + + return s5c73m3_isp_command(state, COMM_FLICKER_MODE, pwr_line_freq); +} + +static int s5c73m3_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sensor_sd(ctrl); + struct s5c73m3 *state = sensor_sd_to_s5c73m3(sd); + int ret = 0; + + v4l2_dbg(1, s5c73m3_dbg, sd, "set_ctrl: %s, value: %d\n", + ctrl->name, ctrl->val); + + mutex_lock(&state->lock); + /* + * If the device is not powered up by the host driver do + * not apply any controls to H/W at this time. Instead + * the controls will be restored right after power-up. + */ + if (state->power == 0) + goto unlock; + + if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) { + ret = -EINVAL; + goto unlock; + } + + switch (ctrl->id) { + case V4L2_CID_3A_LOCK: + ret = s5c73m3_3a_lock(state, ctrl); + break; + + case V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE: + ret = s5c73m3_set_white_balance(state, ctrl->val); + break; + + case V4L2_CID_CONTRAST: + ret = s5c73m3_set_contrast(state, ctrl->val); + break; + + case V4L2_CID_COLORFX: + ret = s5c73m3_set_colorfx(state, ctrl->val); + break; + + case V4L2_CID_EXPOSURE_AUTO: + ret = s5c73m3_set_exposure(state, ctrl->val); + break; + + case V4L2_CID_FOCUS_AUTO: + ret = s5c73m3_set_auto_focus(state, ctrl->val); + break; + + case V4L2_CID_IMAGE_STABILIZATION: + ret = s5c73m3_set_stabilization(state, ctrl->val); + break; + + case V4L2_CID_ISO_SENSITIVITY: + ret = s5c73m3_set_iso(state, ctrl->val); + break; + + case V4L2_CID_JPEG_COMPRESSION_QUALITY: + ret = s5c73m3_set_jpeg_quality(state, ctrl->val); + break; + + case V4L2_CID_POWER_LINE_FREQUENCY: + ret = s5c73m3_set_power_line_freq(state, ctrl->val); + break; + + case V4L2_CID_SATURATION: + ret = s5c73m3_set_saturation(state, ctrl->val); + break; + + case V4L2_CID_SCENE_MODE: + ret = s5c73m3_set_scene_program(state, ctrl->val); + break; + + case V4L2_CID_SHARPNESS: + ret = s5c73m3_set_sharpness(state, ctrl->val); + break; + + case V4L2_CID_WIDE_DYNAMIC_RANGE: + ret = s5c73m3_isp_command(state, COMM_WDR, !!ctrl->val); + break; + + case V4L2_CID_ZOOM_ABSOLUTE: + ret = s5c73m3_isp_command(state, COMM_ZOOM_STEP, ctrl->val); + break; + } +unlock: + mutex_unlock(&state->lock); + return ret; +} + +static const struct v4l2_ctrl_ops s5c73m3_ctrl_ops = { + .g_volatile_ctrl = s5c73m3_g_volatile_ctrl, + .s_ctrl = s5c73m3_s_ctrl, +}; + +/* Supported manual ISO values */ +static const s64 iso_qmenu[] = { + /* COMM_ISO: 0x0001...0x0004 */ + 100, 200, 400, 800, +}; + +/* Supported exposure bias values (-2.0EV...+2.0EV) */ +static const s64 ev_bias_qmenu[] = { + /* COMM_EV: 0x0000...0x0008 */ + -2000, -1500, -1000, -500, 0, 500, 1000, 1500, 2000 +}; + +int s5c73m3_init_controls(struct s5c73m3 *state) +{ + const struct v4l2_ctrl_ops *ops = &s5c73m3_ctrl_ops; + struct s5c73m3_ctrls *ctrls = &state->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + + int ret = v4l2_ctrl_handler_init(hdl, 22); + if (ret) + return ret; + + /* White balance */ + ctrls->auto_wb = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, + 9, ~0x15e, V4L2_WHITE_BALANCE_AUTO); + + /* Exposure (only automatic exposure) */ + ctrls->auto_exposure = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_EXPOSURE_AUTO, 0, ~0x01, V4L2_EXPOSURE_AUTO); + + ctrls->exposure_bias = v4l2_ctrl_new_int_menu(hdl, ops, + V4L2_CID_AUTO_EXPOSURE_BIAS, + ARRAY_SIZE(ev_bias_qmenu) - 1, + ARRAY_SIZE(ev_bias_qmenu)/2 - 1, + ev_bias_qmenu); + + ctrls->exposure_metering = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_EXPOSURE_METERING, + 2, ~0x7, V4L2_EXPOSURE_METERING_AVERAGE); + + /* Auto focus */ + ctrls->focus_auto = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_FOCUS_AUTO, 0, 1, 1, 0); + + ctrls->af_start = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_AUTO_FOCUS_START, 0, 1, 1, 0); + + ctrls->af_stop = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_AUTO_FOCUS_STOP, 0, 1, 1, 0); + + ctrls->af_status = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_AUTO_FOCUS_STATUS, 0, + (V4L2_AUTO_FOCUS_STATUS_BUSY | + V4L2_AUTO_FOCUS_STATUS_REACHED | + V4L2_AUTO_FOCUS_STATUS_FAILED), + 0, V4L2_AUTO_FOCUS_STATUS_IDLE); + + ctrls->af_distance = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_AUTO_FOCUS_RANGE, + V4L2_AUTO_FOCUS_RANGE_MACRO, + ~(1 << V4L2_AUTO_FOCUS_RANGE_NORMAL | + 1 << V4L2_AUTO_FOCUS_RANGE_MACRO), + V4L2_AUTO_FOCUS_RANGE_NORMAL); + /* ISO sensitivity */ + ctrls->auto_iso = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_ISO_SENSITIVITY_AUTO, 1, 0, + V4L2_ISO_SENSITIVITY_AUTO); + + ctrls->iso = v4l2_ctrl_new_int_menu(hdl, ops, + V4L2_CID_ISO_SENSITIVITY, ARRAY_SIZE(iso_qmenu) - 1, + ARRAY_SIZE(iso_qmenu)/2 - 1, iso_qmenu); + + ctrls->contrast = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_CONTRAST, -2, 2, 1, 0); + + ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_SATURATION, -2, 2, 1, 0); + + ctrls->sharpness = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_SHARPNESS, -2, 2, 1, 0); + + ctrls->zoom = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_ZOOM_ABSOLUTE, 0, 30, 1, 0); + + ctrls->colorfx = v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX, + V4L2_COLORFX_AQUA, ~0x40f, V4L2_COLORFX_NONE); + + ctrls->wdr = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_WIDE_DYNAMIC_RANGE, 0, 1, 1, 0); + + ctrls->stabilization = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_IMAGE_STABILIZATION, 0, 1, 1, 0); + + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO); + + ctrls->jpeg_quality = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, 1, 100, 1, 80); + + ctrls->scene_mode = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_SCENE_MODE, V4L2_SCENE_MODE_TEXT, ~0x3fff, + V4L2_SCENE_MODE_NONE); + + ctrls->aaa_lock = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_3A_LOCK, 0, 0x7, 0, 0); + + if (hdl->error) { + ret = hdl->error; + v4l2_ctrl_handler_free(hdl); + return ret; + } + + v4l2_ctrl_auto_cluster(3, &ctrls->auto_exposure, 0, false); + ctrls->auto_iso->flags |= V4L2_CTRL_FLAG_VOLATILE | + V4L2_CTRL_FLAG_UPDATE; + v4l2_ctrl_auto_cluster(2, &ctrls->auto_iso, 0, false); + ctrls->af_status->flags |= V4L2_CTRL_FLAG_VOLATILE; + v4l2_ctrl_cluster(6, &ctrls->focus_auto); + + state->sensor_sd.ctrl_handler = hdl; + + return 0; +} diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c new file mode 100644 index 00000000..6f3a9c00 --- /dev/null +++ b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c @@ -0,0 +1,156 @@ +/* + * Samsung LSI S5C73M3 8M pixel camera driver + * + * Copyright (C) 2012, Samsung Electronics, Co., Ltd. + * Sylwester Nawrocki + * Andrzej Hajda + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "s5c73m3.h" + +#define S5C73M3_SPI_DRV_NAME "S5C73M3-SPI" + +enum spi_direction { + SPI_DIR_RX, + SPI_DIR_TX +}; + +static int spi_xmit(struct spi_device *spi_dev, void *addr, const int len, + enum spi_direction dir) +{ + struct spi_message msg; + int r; + struct spi_transfer xfer = { + .len = len, + }; + + if (dir == SPI_DIR_TX) + xfer.tx_buf = addr; + else + xfer.rx_buf = addr; + + if (spi_dev == NULL) { + dev_err(&spi_dev->dev, "SPI device is uninitialized\n"); + return -ENODEV; + } + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + r = spi_sync(spi_dev, &msg); + if (r < 0) + dev_err(&spi_dev->dev, "%s spi_sync failed %d\n", __func__, r); + + return r; +} + +int s5c73m3_spi_write(struct s5c73m3 *state, const void *addr, + const unsigned int len, const unsigned int tx_size) +{ + struct spi_device *spi_dev = state->spi_dev; + u32 count = len / tx_size; + u32 extra = len % tx_size; + unsigned int i, j = 0; + u8 padding[32]; + int r = 0; + + memset(padding, 0, sizeof(padding)); + + for (i = 0; i < count ; i++) { + r = spi_xmit(spi_dev, (void *)addr + j, tx_size, SPI_DIR_TX); + if (r < 0) + return r; + j += tx_size; + } + + if (extra > 0) { + r = spi_xmit(spi_dev, (void *)addr + j, extra, SPI_DIR_TX); + if (r < 0) + return r; + } + + return spi_xmit(spi_dev, padding, sizeof(padding), SPI_DIR_TX); +} + +int s5c73m3_spi_read(struct s5c73m3 *state, void *addr, + const unsigned int len, const unsigned int tx_size) +{ + struct spi_device *spi_dev = state->spi_dev; + u32 count = len / tx_size; + u32 extra = len % tx_size; + unsigned int i, j = 0; + int r = 0; + + for (i = 0; i < count ; i++) { + r = spi_xmit(spi_dev, addr + j, tx_size, SPI_DIR_RX); + if (r < 0) + return r; + j += tx_size; + } + + if (extra > 0) + return spi_xmit(spi_dev, addr + j, extra, SPI_DIR_RX); + + return 0; +} + +static int s5c73m3_spi_probe(struct spi_device *spi) +{ + int r; + struct s5c73m3 *state = container_of(spi->dev.driver, struct s5c73m3, + spidrv.driver); + spi->bits_per_word = 32; + + r = spi_setup(spi); + if (r < 0) { + dev_err(&spi->dev, "spi_setup() failed\n"); + return r; + } + + mutex_lock(&state->lock); + state->spi_dev = spi; + mutex_unlock(&state->lock); + + v4l2_info(&state->sensor_sd, "S5C73M3 SPI probed successfully\n"); + return 0; +} + +static int s5c73m3_spi_remove(struct spi_device *spi) +{ + return 0; +} + +int s5c73m3_register_spi_driver(struct s5c73m3 *state) +{ + struct spi_driver *spidrv = &state->spidrv; + + spidrv->remove = s5c73m3_spi_remove; + spidrv->probe = s5c73m3_spi_probe; + spidrv->driver.name = S5C73M3_SPI_DRV_NAME; + spidrv->driver.bus = &spi_bus_type; + spidrv->driver.owner = THIS_MODULE; + + return spi_register_driver(spidrv); +} + +void s5c73m3_unregister_spi_driver(struct s5c73m3 *state) +{ + spi_unregister_driver(&state->spidrv); +} diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h new file mode 100644 index 00000000..9d2c0865 --- /dev/null +++ b/drivers/media/i2c/s5c73m3/s5c73m3.h @@ -0,0 +1,459 @@ +/* + * Samsung LSI S5C73M3 8M pixel camera driver + * + * Copyright (C) 2012, Samsung Electronics, Co., Ltd. + * Sylwester Nawrocki + * Andrzej Hajda + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef S5C73M3_H_ +#define S5C73M3_H_ + +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "S5C73M3" + +#define S5C73M3_ISP_FMT V4L2_MBUS_FMT_VYUY8_2X8 +#define S5C73M3_JPEG_FMT V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 + +/* Subdevs pad index definitions */ +enum s5c73m3_pads { + S5C73M3_ISP_PAD, + S5C73M3_JPEG_PAD, + S5C73M3_NUM_PADS +}; + +enum s5c73m3_oif_pads { + OIF_ISP_PAD, + OIF_JPEG_PAD, + OIF_SOURCE_PAD, + OIF_NUM_PADS +}; + +#define S5C73M3_SENSOR_FW_LEN 6 +#define S5C73M3_SENSOR_TYPE_LEN 12 + +#define S5C73M3_REG(_addrh, _addrl) (((_addrh) << 16) | _addrl) + +#define AHB_MSB_ADDR_PTR 0xfcfc +#define REG_CMDWR_ADDRH 0x0050 +#define REG_CMDWR_ADDRL 0x0054 +#define REG_CMDRD_ADDRH 0x0058 +#define REG_CMDRD_ADDRL 0x005c +#define REG_CMDBUF_ADDR 0x0f14 + +#define REG_I2C_SEQ_STATUS S5C73M3_REG(0x0009, 0x59A6) +#define SEQ_END_PLL (1<<0x0) +#define SEQ_END_SENSOR (1<<0x1) +#define SEQ_END_GPIO (1<<0x2) +#define SEQ_END_FROM (1<<0x3) +#define SEQ_END_STABLE_AE_AWB (1<<0x4) +#define SEQ_END_READY_I2C_CMD (1<<0x5) + +#define REG_I2C_STATUS S5C73M3_REG(0x0009, 0x599E) +#define I2C_STATUS_CIS_I2C (1<<0x0) +#define I2C_STATUS_AF_INIT (1<<0x1) +#define I2C_STATUS_CAL_DATA (1<<0x2) +#define I2C_STATUS_FRAME_COUNT (1<<0x3) +#define I2C_STATUS_FROM_INIT (1<<0x4) +#define I2C_STATUS_I2C_CIS_STREAM_OFF (1<<0x5) +#define I2C_STATUS_I2C_N_CMD_OVER (1<<0x6) +#define I2C_STATUS_I2C_N_CMD_MISMATCH (1<<0x7) +#define I2C_STATUS_CHECK_BIN_CRC (1<<0x8) +#define I2C_STATUS_EXCEPTION (1<<0x9) +#define I2C_STATUS_INIF_INIT_STATE (0x8) + +#define REG_STATUS S5C73M3_REG(0x0009, 0x5080) +#define REG_STATUS_BOOT_SUB_MAIN_ENTER 0xff01 +#define REG_STATUS_BOOT_SRAM_TIMING_OK 0xff02 +#define REG_STATUS_BOOT_INTERRUPTS_EN 0xff03 +#define REG_STATUS_BOOT_R_PLL_DONE 0xff04 +#define REG_STATUS_BOOT_R_PLL_LOCKTIME_DONE 0xff05 +#define REG_STATUS_BOOT_DELAY_COUNT_DONE 0xff06 +#define REG_STATUS_BOOT_I_PLL_DONE 0xff07 +#define REG_STATUS_BOOT_I_PLL_LOCKTIME_DONE 0xff08 +#define REG_STATUS_BOOT_PLL_INIT_OK 0xff09 +#define REG_STATUS_BOOT_SENSOR_INIT_OK 0xff0a +#define REG_STATUS_BOOT_GPIO_SETTING_OK 0xff0b +#define REG_STATUS_BOOT_READ_CAL_DATA_OK 0xff0c +#define REG_STATUS_BOOT_STABLE_AE_AWB_OK 0xff0d +#define REG_STATUS_ISP_COMMAND_COMPLETED 0xffff +#define REG_STATUS_EXCEPTION_OCCURED 0xdead + +#define COMM_RESULT_OFFSET S5C73M3_REG(0x0009, 0x5000) + +#define COMM_IMG_OUTPUT 0x0902 +#define COMM_IMG_OUTPUT_HDR 0x0008 +#define COMM_IMG_OUTPUT_YUV 0x0009 +#define COMM_IMG_OUTPUT_INTERLEAVED 0x000d + +#define COMM_STILL_PRE_FLASH 0x0a00 +#define COMM_STILL_PRE_FLASH_FIRE 0x0000 +#define COMM_STILL_PRE_FLASH_NON_FIRED 0x0000 +#define COMM_STILL_PRE_FLASH_FIRED 0x0001 + +#define COMM_STILL_MAIN_FLASH 0x0a02 +#define COMM_STILL_MAIN_FLASH_CANCEL 0x0001 +#define COMM_STILL_MAIN_FLASH_FIRE 0x0002 + +#define COMM_ZOOM_STEP 0x0b00 + +#define COMM_IMAGE_EFFECT 0x0b0a +#define COMM_IMAGE_EFFECT_NONE 0x0001 +#define COMM_IMAGE_EFFECT_NEGATIVE 0x0002 +#define COMM_IMAGE_EFFECT_AQUA 0x0003 +#define COMM_IMAGE_EFFECT_SEPIA 0x0004 +#define COMM_IMAGE_EFFECT_MONO 0x0005 + +#define COMM_IMAGE_QUALITY 0x0b0c +#define COMM_IMAGE_QUALITY_SUPERFINE 0x0000 +#define COMM_IMAGE_QUALITY_FINE 0x0001 +#define COMM_IMAGE_QUALITY_NORMAL 0x0002 + +#define COMM_FLASH_MODE 0x0b0e +#define COMM_FLASH_MODE_OFF 0x0000 +#define COMM_FLASH_MODE_ON 0x0001 +#define COMM_FLASH_MODE_AUTO 0x0002 + +#define COMM_FLASH_STATUS 0x0b80 +#define COMM_FLASH_STATUS_OFF 0x0001 +#define COMM_FLASH_STATUS_ON 0x0002 +#define COMM_FLASH_STATUS_AUTO 0x0003 + +#define COMM_FLASH_TORCH 0x0b12 +#define COMM_FLASH_TORCH_OFF 0x0000 +#define COMM_FLASH_TORCH_ON 0x0001 + +#define COMM_AE_NEEDS_FLASH 0x0cba +#define COMM_AE_NEEDS_FLASH_OFF 0x0000 +#define COMM_AE_NEEDS_FLASH_ON 0x0001 + +#define COMM_CHG_MODE 0x0b10 +#define COMM_CHG_MODE_NEW 0x8000 +#define COMM_CHG_MODE_SUBSAMPLING_HALF 0x2000 +#define COMM_CHG_MODE_SUBSAMPLING_QUARTER 0x4000 + +#define COMM_CHG_MODE_YUV_320_240 0x0001 +#define COMM_CHG_MODE_YUV_640_480 0x0002 +#define COMM_CHG_MODE_YUV_880_720 0x0003 +#define COMM_CHG_MODE_YUV_960_720 0x0004 +#define COMM_CHG_MODE_YUV_1184_666 0x0005 +#define COMM_CHG_MODE_YUV_1280_720 0x0006 +#define COMM_CHG_MODE_YUV_1536_864 0x0007 +#define COMM_CHG_MODE_YUV_1600_1200 0x0008 +#define COMM_CHG_MODE_YUV_1632_1224 0x0009 +#define COMM_CHG_MODE_YUV_1920_1080 0x000a +#define COMM_CHG_MODE_YUV_1920_1440 0x000b +#define COMM_CHG_MODE_YUV_2304_1296 0x000c +#define COMM_CHG_MODE_YUV_3264_2448 0x000d +#define COMM_CHG_MODE_YUV_352_288 0x000e +#define COMM_CHG_MODE_YUV_1008_672 0x000f + +#define COMM_CHG_MODE_JPEG_640_480 0x0010 +#define COMM_CHG_MODE_JPEG_800_450 0x0020 +#define COMM_CHG_MODE_JPEG_800_600 0x0030 +#define COMM_CHG_MODE_JPEG_1280_720 0x0040 +#define COMM_CHG_MODE_JPEG_1280_960 0x0050 +#define COMM_CHG_MODE_JPEG_1600_900 0x0060 +#define COMM_CHG_MODE_JPEG_1600_1200 0x0070 +#define COMM_CHG_MODE_JPEG_2048_1152 0x0080 +#define COMM_CHG_MODE_JPEG_2048_1536 0x0090 +#define COMM_CHG_MODE_JPEG_2560_1440 0x00a0 +#define COMM_CHG_MODE_JPEG_2560_1920 0x00b0 +#define COMM_CHG_MODE_JPEG_3264_2176 0x00c0 +#define COMM_CHG_MODE_JPEG_1024_768 0x00d0 +#define COMM_CHG_MODE_JPEG_3264_1836 0x00e0 +#define COMM_CHG_MODE_JPEG_3264_2448 0x00f0 + +#define COMM_AF_CON 0x0e00 +#define COMM_AF_CON_STOP 0x0000 +#define COMM_AF_CON_SCAN 0x0001 /* Full Search */ +#define COMM_AF_CON_START 0x0002 /* Fast Search */ + +#define COMM_AF_CAL 0x0e06 +#define COMM_AF_TOUCH_AF 0x0e0a + +#define REG_AF_STATUS S5C73M3_REG(0x0009, 0x5e80) +#define REG_CAF_STATUS_FIND_SEARCH_DIR 0x0001 +#define REG_CAF_STATUS_FOCUSING 0x0002 +#define REG_CAF_STATUS_FOCUSED 0x0003 +#define REG_CAF_STATUS_UNFOCUSED 0x0004 +#define REG_AF_STATUS_INVALID 0x0010 +#define REG_AF_STATUS_FOCUSING 0x0020 +#define REG_AF_STATUS_FOCUSED 0x0030 +#define REG_AF_STATUS_UNFOCUSED 0x0040 + +#define REG_AF_TOUCH_POSITION S5C73M3_REG(0x0009, 0x5e8e) +#define COMM_AF_FACE_ZOOM 0x0e10 + +#define COMM_AF_MODE 0x0e02 +#define COMM_AF_MODE_NORMAL 0x0000 +#define COMM_AF_MODE_MACRO 0x0001 +#define COMM_AF_MODE_MOVIE_CAF_START 0x0002 +#define COMM_AF_MODE_MOVIE_CAF_STOP 0x0003 +#define COMM_AF_MODE_PREVIEW_CAF_START 0x0004 +#define COMM_AF_MODE_PREVIEW_CAF_STOP 0x0005 + +#define COMM_AF_SOFTLANDING 0x0e16 +#define COMM_AF_SOFTLANDING_ON 0x0000 +#define COMM_AF_SOFTLANDING_RES_COMPLETE 0x0001 + +#define COMM_FACE_DET 0x0e0c +#define COMM_FACE_DET_OFF 0x0000 +#define COMM_FACE_DET_ON 0x0001 + +#define COMM_FACE_DET_OSD 0x0e0e +#define COMM_FACE_DET_OSD_OFF 0x0000 +#define COMM_FACE_DET_OSD_ON 0x0001 + +#define COMM_AE_CON 0x0c00 +#define COMM_AE_STOP 0x0000 /* lock */ +#define COMM_AE_START 0x0001 /* unlock */ + +#define COMM_ISO 0x0c02 +#define COMM_ISO_AUTO 0x0000 +#define COMM_ISO_100 0x0001 +#define COMM_ISO_200 0x0002 +#define COMM_ISO_400 0x0003 +#define COMM_ISO_800 0x0004 +#define COMM_ISO_SPORTS 0x0005 +#define COMM_ISO_NIGHT 0x0006 +#define COMM_ISO_INDOOR 0x0007 + +/* 0x00000 (-2.0 EV)...0x0008 (2.0 EV), 0.5EV step */ +#define COMM_EV 0x0c04 + +#define COMM_METERING 0x0c06 +#define COMM_METERING_CENTER 0x0000 +#define COMM_METERING_SPOT 0x0001 +#define COMM_METERING_AVERAGE 0x0002 +#define COMM_METERING_SMART 0x0003 + +#define COMM_WDR 0x0c08 +#define COMM_WDR_OFF 0x0000 +#define COMM_WDR_ON 0x0001 + +#define COMM_FLICKER_MODE 0x0c12 +#define COMM_FLICKER_NONE 0x0000 +#define COMM_FLICKER_MANUAL_50HZ 0x0001 +#define COMM_FLICKER_MANUAL_60HZ 0x0002 +#define COMM_FLICKER_AUTO 0x0003 +#define COMM_FLICKER_AUTO_50HZ 0x0004 +#define COMM_FLICKER_AUTO_60HZ 0x0005 + +#define COMM_FRAME_RATE 0x0c1e +#define COMM_FRAME_RATE_AUTO_SET 0x0000 +#define COMM_FRAME_RATE_FIXED_30FPS 0x0002 +#define COMM_FRAME_RATE_FIXED_20FPS 0x0003 +#define COMM_FRAME_RATE_FIXED_15FPS 0x0004 +#define COMM_FRAME_RATE_FIXED_60FPS 0x0007 +#define COMM_FRAME_RATE_FIXED_120FPS 0x0008 +#define COMM_FRAME_RATE_FIXED_7FPS 0x0009 +#define COMM_FRAME_RATE_FIXED_10FPS 0x000a +#define COMM_FRAME_RATE_FIXED_90FPS 0x000b +#define COMM_FRAME_RATE_ANTI_SHAKE 0x0013 + +/* 0x0000...0x0004 -> sharpness: 0, 1, 2, -1, -2 */ +#define COMM_SHARPNESS 0x0c14 + +/* 0x0000...0x0004 -> saturation: 0, 1, 2, -1, -2 */ +#define COMM_SATURATION 0x0c16 + +/* 0x0000...0x0004 -> contrast: 0, 1, 2, -1, -2 */ +#define COMM_CONTRAST 0x0c18 + +#define COMM_SCENE_MODE 0x0c1a +#define COMM_SCENE_MODE_NONE 0x0000 +#define COMM_SCENE_MODE_PORTRAIT 0x0001 +#define COMM_SCENE_MODE_LANDSCAPE 0x0002 +#define COMM_SCENE_MODE_SPORTS 0x0003 +#define COMM_SCENE_MODE_INDOOR 0x0004 +#define COMM_SCENE_MODE_BEACH 0x0005 +#define COMM_SCENE_MODE_SUNSET 0x0006 +#define COMM_SCENE_MODE_DAWN 0x0007 +#define COMM_SCENE_MODE_FALL 0x0008 +#define COMM_SCENE_MODE_NIGHT 0x0009 +#define COMM_SCENE_MODE_AGAINST_LIGHT 0x000a +#define COMM_SCENE_MODE_FIRE 0x000b +#define COMM_SCENE_MODE_TEXT 0x000c +#define COMM_SCENE_MODE_CANDLE 0x000d + +#define COMM_AE_AUTO_BRACKET 0x0b14 +#define COMM_AE_AUTO_BRAKET_EV05 0x0080 +#define COMM_AE_AUTO_BRAKET_EV10 0x0100 +#define COMM_AE_AUTO_BRAKET_EV15 0x0180 +#define COMM_AE_AUTO_BRAKET_EV20 0x0200 + +#define COMM_SENSOR_STREAMING 0x090a +#define COMM_SENSOR_STREAMING_OFF 0x0000 +#define COMM_SENSOR_STREAMING_ON 0x0001 + +#define COMM_AWB_MODE 0x0d02 +#define COMM_AWB_MODE_INCANDESCENT 0x0000 +#define COMM_AWB_MODE_FLUORESCENT1 0x0001 +#define COMM_AWB_MODE_FLUORESCENT2 0x0002 +#define COMM_AWB_MODE_DAYLIGHT 0x0003 +#define COMM_AWB_MODE_CLOUDY 0x0004 +#define COMM_AWB_MODE_AUTO 0x0005 + +#define COMM_AWB_CON 0x0d00 +#define COMM_AWB_STOP 0x0000 /* lock */ +#define COMM_AWB_START 0x0001 /* unlock */ + +#define COMM_FW_UPDATE 0x0906 +#define COMM_FW_UPDATE_NOT_READY 0x0000 +#define COMM_FW_UPDATE_SUCCESS 0x0005 +#define COMM_FW_UPDATE_FAIL 0x0007 +#define COMM_FW_UPDATE_BUSY 0xffff + + +#define S5C73M3_MAX_SUPPLIES 6 + +struct s5c73m3_ctrls { + struct v4l2_ctrl_handler handler; + struct { + /* exposure/exposure bias cluster */ + struct v4l2_ctrl *auto_exposure; + struct v4l2_ctrl *exposure_bias; + struct v4l2_ctrl *exposure_metering; + }; + struct { + /* iso/auto iso cluster */ + struct v4l2_ctrl *auto_iso; + struct v4l2_ctrl *iso; + }; + struct v4l2_ctrl *auto_wb; + struct { + /* continuous auto focus/auto focus cluster */ + struct v4l2_ctrl *focus_auto; + struct v4l2_ctrl *af_start; + struct v4l2_ctrl *af_stop; + struct v4l2_ctrl *af_status; + struct v4l2_ctrl *af_distance; + }; + + struct v4l2_ctrl *aaa_lock; + struct v4l2_ctrl *colorfx; + struct v4l2_ctrl *contrast; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *sharpness; + struct v4l2_ctrl *zoom; + struct v4l2_ctrl *wdr; + struct v4l2_ctrl *stabilization; + struct v4l2_ctrl *jpeg_quality; + struct v4l2_ctrl *scene_mode; +}; + +enum s5c73m3_gpio_id { + STBY, + RST, + GPIO_NUM, +}; + +enum s5c73m3_resolution_types { + RES_ISP, + RES_JPEG, +}; + +struct s5c73m3_interval { + u16 fps_reg; + struct v4l2_fract interval; + /* Maximum rectangle for the interval */ + struct v4l2_frmsize_discrete size; +}; + +struct s5c73m3 { + struct v4l2_subdev sensor_sd; + struct media_pad sensor_pads[S5C73M3_NUM_PADS]; + + struct v4l2_subdev oif_sd; + struct media_pad oif_pads[OIF_NUM_PADS]; + + struct spi_driver spidrv; + struct spi_device *spi_dev; + struct i2c_client *i2c_client; + u32 i2c_write_address; + u32 i2c_read_address; + + struct regulator_bulk_data supplies[S5C73M3_MAX_SUPPLIES]; + struct s5c73m3_gpio gpio[GPIO_NUM]; + + /* External master clock frequency */ + u32 mclk_frequency; + /* Video bus type - MIPI-CSI2/paralell */ + enum v4l2_mbus_type bus_type; + + const struct s5c73m3_frame_size *sensor_pix_size[2]; + const struct s5c73m3_frame_size *oif_pix_size[2]; + enum v4l2_mbus_pixelcode mbus_code; + + const struct s5c73m3_interval *fiv; + + struct v4l2_mbus_frame_desc frame_desc; + /* protects the struct members below */ + struct mutex lock; + + struct s5c73m3_ctrls ctrls; + + u8 streaming:1; + u8 apply_fmt:1; + u8 apply_fiv:1; + u8 isp_ready:1; + + short power; + + char sensor_fw[S5C73M3_SENSOR_FW_LEN + 2]; + char sensor_type[S5C73M3_SENSOR_TYPE_LEN + 2]; + char fw_file_version[2]; + unsigned int fw_size; +}; + +struct s5c73m3_frame_size { + u32 width; + u32 height; + u8 reg_val; +}; + +extern int s5c73m3_dbg; + +int s5c73m3_register_spi_driver(struct s5c73m3 *state); +void s5c73m3_unregister_spi_driver(struct s5c73m3 *state); +int s5c73m3_spi_write(struct s5c73m3 *state, const void *addr, + const unsigned int len, const unsigned int tx_size); +int s5c73m3_spi_read(struct s5c73m3 *state, void *addr, + const unsigned int len, const unsigned int tx_size); + +int s5c73m3_read(struct s5c73m3 *state, u32 addr, u16 *data); +int s5c73m3_write(struct s5c73m3 *state, u32 addr, u16 data); +int s5c73m3_isp_command(struct s5c73m3 *state, u16 command, u16 data); +int s5c73m3_init_controls(struct s5c73m3 *state); + +static inline struct v4l2_subdev *ctrl_to_sensor_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct s5c73m3, + ctrls.handler)->sensor_sd; +} + +static inline struct s5c73m3 *sensor_sd_to_s5c73m3(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s5c73m3, sensor_sd); +} + +static inline struct s5c73m3 *oif_sd_to_s5c73m3(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s5c73m3, oif_sd); +} +#endif /* S5C73M3_H_ */ diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c new file mode 100644 index 00000000..2750de63 --- /dev/null +++ b/drivers/media/i2c/s5k4ecgx.c @@ -0,0 +1,1036 @@ +/* + * Driver for Samsung S5K4ECGX 1/4" 5Mp CMOS Image Sensor SoC + * with an Embedded Image Signal Processor. + * + * Copyright (C) 2012, Linaro, Sangwook Lee + * Copyright (C) 2012, Insignal Co,. Ltd, Homin Lee + * + * Based on s5k6aa and noon010pc30 driver + * Copyright (C) 2011, Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); + +#define S5K4ECGX_DRIVER_NAME "s5k4ecgx" +#define S5K4ECGX_FIRMWARE "s5k4ecgx.bin" + +/* Firmware revision information */ +#define REG_FW_REVISION 0x700001a6 +#define REG_FW_VERSION 0x700001a4 +#define S5K4ECGX_REVISION_1_1 0x11 +#define S5K4ECGX_FW_VERSION 0x4ec0 + +/* General purpose parameters */ +#define REG_USER_BRIGHTNESS 0x7000022c +#define REG_USER_CONTRAST 0x7000022e +#define REG_USER_SATURATION 0x70000230 + +#define REG_G_ENABLE_PREV 0x7000023e +#define REG_G_ENABLE_PREV_CHG 0x70000240 +#define REG_G_NEW_CFG_SYNC 0x7000024a +#define REG_G_PREV_IN_WIDTH 0x70000250 +#define REG_G_PREV_IN_HEIGHT 0x70000252 +#define REG_G_PREV_IN_XOFFS 0x70000254 +#define REG_G_PREV_IN_YOFFS 0x70000256 +#define REG_G_CAP_IN_WIDTH 0x70000258 +#define REG_G_CAP_IN_HEIGHT 0x7000025a +#define REG_G_CAP_IN_XOFFS 0x7000025c +#define REG_G_CAP_IN_YOFFS 0x7000025e +#define REG_G_INPUTS_CHANGE_REQ 0x70000262 +#define REG_G_ACTIVE_PREV_CFG 0x70000266 +#define REG_G_PREV_CFG_CHG 0x70000268 +#define REG_G_PREV_OPEN_AFTER_CH 0x7000026a + +/* Preview context register sets. n = 0...4. */ +#define PREG(n, x) ((n) * 0x30 + (x)) +#define REG_P_OUT_WIDTH(n) PREG(n, 0x700002a6) +#define REG_P_OUT_HEIGHT(n) PREG(n, 0x700002a8) +#define REG_P_FMT(n) PREG(n, 0x700002aa) +#define REG_P_PVI_MASK(n) PREG(n, 0x700002b4) +#define REG_P_FR_TIME_TYPE(n) PREG(n, 0x700002be) +#define FR_TIME_DYNAMIC 0 +#define FR_TIME_FIXED 1 +#define FR_TIME_FIXED_ACCURATE 2 +#define REG_P_FR_TIME_Q_TYPE(n) PREG(n, 0x700002c0) +#define FR_TIME_Q_DYNAMIC 0 +#define FR_TIME_Q_BEST_FRRATE 1 +#define FR_TIME_Q_BEST_QUALITY 2 + +/* Frame period in 0.1 ms units */ +#define REG_P_MAX_FR_TIME(n) PREG(n, 0x700002c2) +#define REG_P_MIN_FR_TIME(n) PREG(n, 0x700002c4) +#define US_TO_FR_TIME(__t) ((__t) / 100) +#define REG_P_PREV_MIRROR(n) PREG(n, 0x700002d0) +#define REG_P_CAP_MIRROR(n) PREG(n, 0x700002d2) + +#define REG_G_PREVZOOM_IN_WIDTH 0x70000494 +#define REG_G_PREVZOOM_IN_HEIGHT 0x70000496 +#define REG_G_PREVZOOM_IN_XOFFS 0x70000498 +#define REG_G_PREVZOOM_IN_YOFFS 0x7000049a +#define REG_G_CAPZOOM_IN_WIDTH 0x7000049c +#define REG_G_CAPZOOM_IN_HEIGHT 0x7000049e +#define REG_G_CAPZOOM_IN_XOFFS 0x700004a0 +#define REG_G_CAPZOOM_IN_YOFFS 0x700004a2 + +/* n = 0...4 */ +#define REG_USER_SHARPNESS(n) (0x70000a28 + (n) * 0xb6) + +/* Reduce sharpness range for user space API */ +#define SHARPNESS_DIV 8208 +#define TOK_TERM 0xffffffff + +/* + * FIXME: This is copied from s5k6aa, because of no information + * in the S5K4ECGX datasheet. + * H/W register Interface (0xd0000000 - 0xd0000fff) + */ +#define AHB_MSB_ADDR_PTR 0xfcfc +#define GEN_REG_OFFSH 0xd000 +#define REG_CMDWR_ADDRH 0x0028 +#define REG_CMDWR_ADDRL 0x002a +#define REG_CMDRD_ADDRH 0x002c +#define REG_CMDRD_ADDRL 0x002e +#define REG_CMDBUF0_ADDR 0x0f12 + +struct s5k4ecgx_frmsize { + struct v4l2_frmsize_discrete size; + /* Fixed sensor matrix crop rectangle */ + struct v4l2_rect input_window; +}; + +struct regval_list { + u32 addr; + u16 val; +}; + +/* + * TODO: currently only preview is supported and snapshot (capture) + * is not implemented yet + */ +static const struct s5k4ecgx_frmsize s5k4ecgx_prev_sizes[] = { + { + .size = { 176, 144 }, + .input_window = { 0x00, 0x00, 0x928, 0x780 }, + }, { + .size = { 352, 288 }, + .input_window = { 0x00, 0x00, 0x928, 0x780 }, + }, { + .size = { 640, 480 }, + .input_window = { 0x00, 0x00, 0xa00, 0x780 }, + }, { + .size = { 720, 480 }, + .input_window = { 0x00, 0x00, 0xa00, 0x6a8 }, + } +}; + +#define S5K4ECGX_NUM_PREV ARRAY_SIZE(s5k4ecgx_prev_sizes) + +struct s5k4ecgx_pixfmt { + enum v4l2_mbus_pixelcode code; + u32 colorspace; + /* REG_TC_PCFG_Format register value */ + u16 reg_p_format; +}; + +/* By default value, output from sensor will be YUV422 0-255 */ +static const struct s5k4ecgx_pixfmt s5k4ecgx_formats[] = { + { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 }, +}; + +static const char * const s5k4ecgx_supply_names[] = { + /* + * Usually 2.8V is used for analog power (vdda) + * and digital IO (vddio, vdddcore) + */ + "vdda", + "vddio", + "vddcore", + "vddreg", /* The internal s5k4ecgx regulator's supply (1.8V) */ +}; + +#define S5K4ECGX_NUM_SUPPLIES ARRAY_SIZE(s5k4ecgx_supply_names) + +enum s5k4ecgx_gpio_id { + STBY, + RST, + GPIO_NUM, +}; + +struct s5k4ecgx { + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler handler; + + struct s5k4ecgx_platform_data *pdata; + const struct s5k4ecgx_pixfmt *curr_pixfmt; + const struct s5k4ecgx_frmsize *curr_frmsize; + struct mutex lock; + u8 streaming; + u8 set_params; + + struct regulator_bulk_data supplies[S5K4ECGX_NUM_SUPPLIES]; + struct s5k4ecgx_gpio gpio[GPIO_NUM]; +}; + +static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s5k4ecgx, sd); +} + +static int s5k4ecgx_i2c_read(struct i2c_client *client, u16 addr, u16 *val) +{ + u8 wbuf[2] = { addr >> 8, addr & 0xff }; + struct i2c_msg msg[2]; + u8 rbuf[2]; + int ret; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 2; + msg[0].buf = wbuf; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 2; + msg[1].buf = rbuf; + + ret = i2c_transfer(client->adapter, msg, 2); + *val = be16_to_cpu(*((u16 *)rbuf)); + + v4l2_dbg(4, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val); + + return ret == 2 ? 0 : ret; +} + +static int s5k4ecgx_i2c_write(struct i2c_client *client, u16 addr, u16 val) +{ + u8 buf[4] = { addr >> 8, addr & 0xff, val >> 8, val & 0xff }; + + int ret = i2c_master_send(client, buf, 4); + v4l2_dbg(4, debug, client, "i2c_write: 0x%04x : 0x%04x\n", addr, val); + + return ret == 4 ? 0 : ret; +} + +static int s5k4ecgx_write(struct i2c_client *client, u32 addr, u16 val) +{ + u16 high = addr >> 16, low = addr & 0xffff; + int ret; + + v4l2_dbg(3, debug, client, "write: 0x%08x : 0x%04x\n", addr, val); + + ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRH, high); + if (!ret) + ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRL, low); + if (!ret) + ret = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val); + + return ret; +} + +static int s5k4ecgx_read(struct i2c_client *client, u32 addr, u16 *val) +{ + u16 high = addr >> 16, low = addr & 0xffff; + int ret; + + ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRH, high); + if (!ret) + ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRL, low); + if (!ret) + ret = s5k4ecgx_i2c_read(client, REG_CMDBUF0_ADDR, val); + if (!ret) + dev_err(&client->dev, "Failed to execute read command\n"); + + return ret; +} + +static int s5k4ecgx_read_fw_ver(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u16 hw_rev, fw_ver = 0; + int ret; + + ret = s5k4ecgx_read(client, REG_FW_VERSION, &fw_ver); + if (ret < 0 || fw_ver != S5K4ECGX_FW_VERSION) { + v4l2_err(sd, "FW version check failed!\n"); + return -ENODEV; + } + + ret = s5k4ecgx_read(client, REG_FW_REVISION, &hw_rev); + if (ret < 0) + return ret; + + v4l2_info(sd, "chip found FW ver: 0x%x, HW rev: 0x%x\n", + fw_ver, hw_rev); + return 0; +} + +static int s5k4ecgx_set_ahb_address(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + /* Set APB peripherals start address */ + ret = s5k4ecgx_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH); + if (ret < 0) + return ret; + /* + * FIXME: This is copied from s5k6aa, because of no information + * in s5k4ecgx's datasheet. + * sw_reset is activated to put device into idle status + */ + ret = s5k4ecgx_i2c_write(client, 0x0010, 0x0001); + if (ret < 0) + return ret; + + ret = s5k4ecgx_i2c_write(client, 0x1030, 0x0000); + if (ret < 0) + return ret; + /* Halt ARM CPU */ + return s5k4ecgx_i2c_write(client, 0x0014, 0x0001); +} + +#define FW_CRC_SIZE 4 +/* Register address, value are 4, 2 bytes */ +#define FW_RECORD_SIZE 6 +/* + * The firmware has following format: + * < total number of records (4 bytes + 2 bytes padding) N >, + * < record 0 >, ..., < record N - 1 >, < CRC32-CCITT (4-bytes) >, + * where "record" is a 4-byte register address followed by 2-byte + * register value (little endian). + * The firmware generator can be found in following git repository: + * git://git.linaro.org/people/sangwook/fimc-v4l2-app.git + */ +static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + const struct firmware *fw; + const u8 *ptr; + int err, i, regs_num; + u32 addr, crc, crc_file, addr_inc = 0; + u16 val; + + err = request_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev); + if (err) { + v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE); + return err; + } + regs_num = le32_to_cpu(get_unaligned_le32(fw->data)); + + v4l2_dbg(3, debug, sd, "FW: %s size %zu register sets %d\n", + S5K4ECGX_FIRMWARE, fw->size, regs_num); + + regs_num++; /* Add header */ + if (fw->size != regs_num * FW_RECORD_SIZE + FW_CRC_SIZE) { + err = -EINVAL; + goto fw_out; + } + crc_file = le32_to_cpu(get_unaligned_le32(fw->data + + regs_num * FW_RECORD_SIZE)); + crc = crc32_le(~0, fw->data, regs_num * FW_RECORD_SIZE); + if (crc != crc_file) { + v4l2_err(sd, "FW: invalid crc (%#x:%#x)\n", crc, crc_file); + err = -EINVAL; + goto fw_out; + } + ptr = fw->data + FW_RECORD_SIZE; + for (i = 1; i < regs_num; i++) { + addr = le32_to_cpu(get_unaligned_le32(ptr)); + ptr += sizeof(u32); + val = le16_to_cpu(get_unaligned_le16(ptr)); + ptr += sizeof(u16); + if (addr - addr_inc != 2) + err = s5k4ecgx_write(client, addr, val); + else + err = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val); + if (err) + break; + addr_inc = addr; + } +fw_out: + release_firmware(fw); + return err; +} + +/* Set preview and capture input window */ +static int s5k4ecgx_set_input_window(struct i2c_client *c, + const struct v4l2_rect *r) +{ + int ret; + + ret = s5k4ecgx_write(c, REG_G_PREV_IN_WIDTH, r->width); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREV_IN_HEIGHT, r->height); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREV_IN_XOFFS, r->left); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREV_IN_YOFFS, r->top); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAP_IN_WIDTH, r->width); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAP_IN_HEIGHT, r->height); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAP_IN_XOFFS, r->left); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAP_IN_YOFFS, r->top); + + return ret; +} + +/* Set preview and capture zoom input window */ +static int s5k4ecgx_set_zoom_window(struct i2c_client *c, + const struct v4l2_rect *r) +{ + int ret; + + ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_WIDTH, r->width); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_HEIGHT, r->height); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_XOFFS, r->left); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_YOFFS, r->top); + + return ret; +} + +static int s5k4ecgx_set_output_framefmt(struct s5k4ecgx *priv) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + int ret; + + ret = s5k4ecgx_write(client, REG_P_OUT_WIDTH(0), + priv->curr_frmsize->size.width); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_OUT_HEIGHT(0), + priv->curr_frmsize->size.height); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_FMT(0), + priv->curr_pixfmt->reg_p_format); + return ret; +} + +static int s5k4ecgx_init_sensor(struct v4l2_subdev *sd) +{ + int ret; + + ret = s5k4ecgx_set_ahb_address(sd); + + /* The delay is from manufacturer's settings */ + msleep(100); + + if (!ret) + ret = s5k4ecgx_load_firmware(sd); + if (ret) + v4l2_err(sd, "Failed to write initial settings\n"); + + return ret; +} + +static int s5k4ecgx_gpio_set_value(struct s5k4ecgx *priv, int id, u32 val) +{ + if (!gpio_is_valid(priv->gpio[id].gpio)) + return 0; + gpio_set_value(priv->gpio[id].gpio, val); + + return 1; +} + +static int __s5k4ecgx_power_on(struct s5k4ecgx *priv) +{ + int ret; + + ret = regulator_bulk_enable(S5K4ECGX_NUM_SUPPLIES, priv->supplies); + if (ret) + return ret; + usleep_range(30, 50); + + /* The polarity of STBY is controlled by TSP */ + if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level)) + usleep_range(30, 50); + + if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level)) + usleep_range(30, 50); + + return 0; +} + +static int __s5k4ecgx_power_off(struct s5k4ecgx *priv) +{ + if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level)) + usleep_range(30, 50); + + if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level)) + usleep_range(30, 50); + + priv->streaming = 0; + + return regulator_bulk_disable(S5K4ECGX_NUM_SUPPLIES, priv->supplies); +} + +/* Find nearest matching image pixel size. */ +static int s5k4ecgx_try_frame_size(struct v4l2_mbus_framefmt *mf, + const struct s5k4ecgx_frmsize **size) +{ + unsigned int min_err = ~0; + int i = ARRAY_SIZE(s5k4ecgx_prev_sizes); + const struct s5k4ecgx_frmsize *fsize = &s5k4ecgx_prev_sizes[0], + *match = NULL; + + while (i--) { + int err = abs(fsize->size.width - mf->width) + + abs(fsize->size.height - mf->height); + if (err < min_err) { + min_err = err; + match = fsize; + } + fsize++; + } + if (match) { + mf->width = match->size.width; + mf->height = match->size.height; + if (size) + *size = match; + return 0; + } + + return -EINVAL; +} + +static int s5k4ecgx_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(s5k4ecgx_formats)) + return -EINVAL; + code->code = s5k4ecgx_formats[code->index].code; + + return 0; +} + +static int s5k4ecgx_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + struct v4l2_mbus_framefmt *mf; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh) { + mf = v4l2_subdev_get_try_format(fh, 0); + fmt->format = *mf; + } + return 0; + } + + mf = &fmt->format; + + mutex_lock(&priv->lock); + mf->width = priv->curr_frmsize->size.width; + mf->height = priv->curr_frmsize->size.height; + mf->code = priv->curr_pixfmt->code; + mf->colorspace = priv->curr_pixfmt->colorspace; + mf->field = V4L2_FIELD_NONE; + mutex_unlock(&priv->lock); + + return 0; +} + +static const struct s5k4ecgx_pixfmt *s5k4ecgx_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + int i = ARRAY_SIZE(s5k4ecgx_formats); + + while (--i) + if (mf->code == s5k4ecgx_formats[i].code) + break; + mf->code = s5k4ecgx_formats[i].code; + + return &s5k4ecgx_formats[i]; +} + +static int s5k4ecgx_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + const struct s5k4ecgx_frmsize *fsize = NULL; + const struct s5k4ecgx_pixfmt *pf; + struct v4l2_mbus_framefmt *mf; + int ret = 0; + + pf = s5k4ecgx_try_fmt(sd, &fmt->format); + s5k4ecgx_try_frame_size(&fmt->format, &fsize); + fmt->format.colorspace = V4L2_COLORSPACE_JPEG; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh) { + mf = v4l2_subdev_get_try_format(fh, 0); + *mf = fmt->format; + } + return 0; + } + + mutex_lock(&priv->lock); + if (!priv->streaming) { + priv->curr_frmsize = fsize; + priv->curr_pixfmt = pf; + priv->set_params = 1; + } else { + ret = -EBUSY; + } + mutex_unlock(&priv->lock); + + return ret; +} + +static const struct v4l2_subdev_pad_ops s5k4ecgx_pad_ops = { + .enum_mbus_code = s5k4ecgx_enum_mbus_code, + .get_fmt = s5k4ecgx_get_fmt, + .set_fmt = s5k4ecgx_set_fmt, +}; + +/* + * V4L2 subdev controls + */ +static int s5k4ecgx_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = &container_of(ctrl->handler, struct s5k4ecgx, + handler)->sd; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + unsigned int i; + int err = 0; + + v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val); + + mutex_lock(&priv->lock); + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + err = s5k4ecgx_write(client, REG_USER_CONTRAST, ctrl->val); + break; + + case V4L2_CID_SATURATION: + err = s5k4ecgx_write(client, REG_USER_SATURATION, ctrl->val); + break; + + case V4L2_CID_SHARPNESS: + /* TODO: Revisit, is this setting for all presets ? */ + for (i = 0; i < 4 && !err; i++) + err = s5k4ecgx_write(client, REG_USER_SHARPNESS(i), + ctrl->val * SHARPNESS_DIV); + break; + + case V4L2_CID_BRIGHTNESS: + err = s5k4ecgx_write(client, REG_USER_BRIGHTNESS, ctrl->val); + break; + } + mutex_unlock(&priv->lock); + if (err < 0) + v4l2_err(sd, "Failed to write s_ctrl err %d\n", err); + + return err; +} + +static const struct v4l2_ctrl_ops s5k4ecgx_ctrl_ops = { + .s_ctrl = s5k4ecgx_s_ctrl, +}; + +/* + * Reading s5k4ecgx version information + */ +static int s5k4ecgx_registered(struct v4l2_subdev *sd) +{ + int ret; + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + + mutex_lock(&priv->lock); + ret = __s5k4ecgx_power_on(priv); + if (!ret) { + ret = s5k4ecgx_read_fw_ver(sd); + __s5k4ecgx_power_off(priv); + } + mutex_unlock(&priv->lock); + + return ret; +} + +/* + * V4L2 subdev internal operations + */ +static int s5k4ecgx_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(fh, 0); + + mf->width = s5k4ecgx_prev_sizes[0].size.width; + mf->height = s5k4ecgx_prev_sizes[0].size.height; + mf->code = s5k4ecgx_formats[0].code; + mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static const struct v4l2_subdev_internal_ops s5k4ecgx_subdev_internal_ops = { + .registered = s5k4ecgx_registered, + .open = s5k4ecgx_open, +}; + +static int s5k4ecgx_s_power(struct v4l2_subdev *sd, int on) +{ + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + int ret; + + v4l2_dbg(1, debug, sd, "Switching %s\n", on ? "on" : "off"); + + if (on) { + ret = __s5k4ecgx_power_on(priv); + if (ret < 0) + return ret; + /* Time to stabilize sensor */ + msleep(100); + ret = s5k4ecgx_init_sensor(sd); + if (ret < 0) + __s5k4ecgx_power_off(priv); + else + priv->set_params = 1; + } else { + ret = __s5k4ecgx_power_off(priv); + } + + return ret; +} + +static int s5k4ecgx_log_status(struct v4l2_subdev *sd) +{ + v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name); + + return 0; +} + +static const struct v4l2_subdev_core_ops s5k4ecgx_core_ops = { + .s_power = s5k4ecgx_s_power, + .log_status = s5k4ecgx_log_status, +}; + +static int __s5k4ecgx_s_params(struct s5k4ecgx *priv) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + const struct v4l2_rect *crop_rect = &priv->curr_frmsize->input_window; + int ret; + + ret = s5k4ecgx_set_input_window(client, crop_rect); + if (!ret) + ret = s5k4ecgx_set_zoom_window(client, crop_rect); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_INPUTS_CHANGE_REQ, 1); + if (!ret) + ret = s5k4ecgx_write(client, 0x70000a1e, 0x28); + if (!ret) + ret = s5k4ecgx_write(client, 0x70000ad4, 0x3c); + if (!ret) + ret = s5k4ecgx_set_output_framefmt(priv); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_PVI_MASK(0), 0x52); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_FR_TIME_TYPE(0), + FR_TIME_DYNAMIC); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_FR_TIME_Q_TYPE(0), + FR_TIME_Q_BEST_FRRATE); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_MIN_FR_TIME(0), + US_TO_FR_TIME(33300)); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_MAX_FR_TIME(0), + US_TO_FR_TIME(66600)); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_PREV_MIRROR(0), 0); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_CAP_MIRROR(0), 0); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_ACTIVE_PREV_CFG, 0); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_PREV_OPEN_AFTER_CH, 1); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_NEW_CFG_SYNC, 1); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_PREV_CFG_CHG, 1); + + return ret; +} + +static int __s5k4ecgx_s_stream(struct s5k4ecgx *priv, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + int ret; + + if (on && priv->set_params) { + ret = __s5k4ecgx_s_params(priv); + if (ret < 0) + return ret; + priv->set_params = 0; + } + /* + * This enables/disables preview stream only. Capture requests + * are not supported yet. + */ + ret = s5k4ecgx_write(client, REG_G_ENABLE_PREV, on); + if (ret < 0) + return ret; + return s5k4ecgx_write(client, REG_G_ENABLE_PREV_CHG, 1); +} + +static int s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on) +{ + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + int ret = 0; + + v4l2_dbg(1, debug, sd, "Turn streaming %s\n", on ? "on" : "off"); + + mutex_lock(&priv->lock); + + if (priv->streaming == !on) { + ret = __s5k4ecgx_s_stream(priv, on); + if (!ret) + priv->streaming = on & 1; + } + + mutex_unlock(&priv->lock); + return ret; +} + +static const struct v4l2_subdev_video_ops s5k4ecgx_video_ops = { + .s_stream = s5k4ecgx_s_stream, +}; + +static const struct v4l2_subdev_ops s5k4ecgx_ops = { + .core = &s5k4ecgx_core_ops, + .pad = &s5k4ecgx_pad_ops, + .video = &s5k4ecgx_video_ops, +}; + +/* + * GPIO setup + */ +static int s5k4ecgx_config_gpio(int nr, int val, const char *name) +{ + unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + int ret; + + if (!gpio_is_valid(nr)) + return 0; + ret = gpio_request_one(nr, flags, name); + if (!ret) + gpio_export(nr, 0); + + return ret; +} + +static void s5k4ecgx_free_gpios(struct s5k4ecgx *priv) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(priv->gpio); i++) { + if (!gpio_is_valid(priv->gpio[i].gpio)) + continue; + gpio_free(priv->gpio[i].gpio); + priv->gpio[i].gpio = -EINVAL; + } +} + +static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv, + const struct s5k4ecgx_platform_data *pdata) +{ + const struct s5k4ecgx_gpio *gpio = &pdata->gpio_stby; + int ret; + + priv->gpio[STBY].gpio = -EINVAL; + priv->gpio[RST].gpio = -EINVAL; + + ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY"); + + if (ret) { + s5k4ecgx_free_gpios(priv); + return ret; + } + priv->gpio[STBY] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + gpio = &pdata->gpio_reset; + + ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_RST"); + if (ret) { + s5k4ecgx_free_gpios(priv); + return ret; + } + priv->gpio[RST] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + return 0; +} + +static int s5k4ecgx_init_v4l2_ctrls(struct s5k4ecgx *priv) +{ + const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops; + struct v4l2_ctrl_handler *hdl = &priv->handler; + int ret; + + ret = v4l2_ctrl_handler_init(hdl, 4); + if (ret) + return ret; + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -208, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0); + + /* Sharpness default is 24612, and then (24612/SHARPNESS_DIV) = 2 */ + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -32704/SHARPNESS_DIV, + 24612/SHARPNESS_DIV, 1, 2); + if (hdl->error) { + ret = hdl->error; + v4l2_ctrl_handler_free(hdl); + return ret; + } + priv->sd.ctrl_handler = hdl; + + return 0; +}; + +static int s5k4ecgx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct s5k4ecgx_platform_data *pdata = client->dev.platform_data; + struct v4l2_subdev *sd; + struct s5k4ecgx *priv; + int ret, i; + + if (pdata == NULL) { + dev_err(&client->dev, "platform data is missing!\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&client->dev, sizeof(struct s5k4ecgx), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->lock); + priv->streaming = 0; + + sd = &priv->sd; + /* Registering subdev */ + v4l2_i2c_subdev_init(sd, client, &s5k4ecgx_ops); + strlcpy(sd->name, S5K4ECGX_DRIVER_NAME, sizeof(sd->name)); + + sd->internal_ops = &s5k4ecgx_subdev_internal_ops; + /* Support v4l2 sub-device user space API */ + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + priv->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + ret = media_entity_init(&sd->entity, 1, &priv->pad, 0); + if (ret) + return ret; + + ret = s5k4ecgx_config_gpios(priv, pdata); + if (ret) { + dev_err(&client->dev, "Failed to set gpios\n"); + goto out_err1; + } + for (i = 0; i < S5K4ECGX_NUM_SUPPLIES; i++) + priv->supplies[i].supply = s5k4ecgx_supply_names[i]; + + ret = devm_regulator_bulk_get(&client->dev, S5K4ECGX_NUM_SUPPLIES, + priv->supplies); + if (ret) { + dev_err(&client->dev, "Failed to get regulators\n"); + goto out_err2; + } + ret = s5k4ecgx_init_v4l2_ctrls(priv); + if (ret) + goto out_err2; + + priv->curr_pixfmt = &s5k4ecgx_formats[0]; + priv->curr_frmsize = &s5k4ecgx_prev_sizes[0]; + + return 0; + +out_err2: + s5k4ecgx_free_gpios(priv); +out_err1: + media_entity_cleanup(&priv->sd.entity); + + return ret; +} + +static int s5k4ecgx_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + + mutex_destroy(&priv->lock); + s5k4ecgx_free_gpios(priv); + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&priv->handler); + media_entity_cleanup(&sd->entity); + + return 0; +} + +static const struct i2c_device_id s5k4ecgx_id[] = { + { S5K4ECGX_DRIVER_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, s5k4ecgx_id); + +static struct i2c_driver v4l2_i2c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = S5K4ECGX_DRIVER_NAME, + }, + .probe = s5k4ecgx_probe, + .remove = s5k4ecgx_remove, + .id_table = s5k4ecgx_id, +}; + +module_i2c_driver(v4l2_i2c_driver); + +MODULE_DESCRIPTION("Samsung S5K4ECGX 5MP SOC camera"); +MODULE_AUTHOR("Sangwook Lee "); +MODULE_AUTHOR("Seok-Young Jang "); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(S5K4ECGX_FIRMWARE); diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c new file mode 100644 index 00000000..bdf5e3db --- /dev/null +++ b/drivers/media/i2c/s5k6aa.c @@ -0,0 +1,1661 @@ +/* + * Driver for Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor + * with embedded SoC ISP. + * + * Copyright (C) 2011, Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * Based on a driver authored by Dongsoo Nathaniel Kim. + * Copyright (C) 2009, Dongsoo Nathaniel Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); + +#define DRIVER_NAME "S5K6AA" + +/* The token to indicate array termination */ +#define S5K6AA_TERM 0xffff +#define S5K6AA_OUT_WIDTH_DEF 640 +#define S5K6AA_OUT_HEIGHT_DEF 480 +#define S5K6AA_WIN_WIDTH_MAX 1280 +#define S5K6AA_WIN_HEIGHT_MAX 1024 +#define S5K6AA_WIN_WIDTH_MIN 8 +#define S5K6AA_WIN_HEIGHT_MIN 8 + +/* + * H/W register Interface (0xD0000000 - 0xD0000FFF) + */ +#define AHB_MSB_ADDR_PTR 0xfcfc +#define GEN_REG_OFFSH 0xd000 +#define REG_CMDWR_ADDRH 0x0028 +#define REG_CMDWR_ADDRL 0x002a +#define REG_CMDRD_ADDRH 0x002c +#define REG_CMDRD_ADDRL 0x002e +#define REG_CMDBUF0_ADDR 0x0f12 +#define REG_CMDBUF1_ADDR 0x0f10 + +/* + * Host S/W Register interface (0x70000000 - 0x70002000) + * The value of the two most significant address bytes is 0x7000, + * (HOST_SWIF_OFFS_H). The register addresses below specify 2 LSBs. + */ +#define HOST_SWIF_OFFSH 0x7000 + +/* Initialization parameters */ +/* Master clock frequency in KHz */ +#define REG_I_INCLK_FREQ_L 0x01b8 +#define REG_I_INCLK_FREQ_H 0x01ba +#define MIN_MCLK_FREQ_KHZ 6000U +#define MAX_MCLK_FREQ_KHZ 27000U +#define REG_I_USE_NPVI_CLOCKS 0x01c6 +#define REG_I_USE_NMIPI_CLOCKS 0x01c8 + +/* Clock configurations, n = 0..2. REG_I_* frequency unit is 4 kHz. */ +#define REG_I_OPCLK_4KHZ(n) ((n) * 6 + 0x01cc) +#define REG_I_MIN_OUTRATE_4KHZ(n) ((n) * 6 + 0x01ce) +#define REG_I_MAX_OUTRATE_4KHZ(n) ((n) * 6 + 0x01d0) +#define SYS_PLL_OUT_FREQ (48000000 / 4000) +#define PCLK_FREQ_MIN (24000000 / 4000) +#define PCLK_FREQ_MAX (48000000 / 4000) +#define REG_I_INIT_PARAMS_UPDATED 0x01e0 +#define REG_I_ERROR_INFO 0x01e2 + +/* General purpose parameters */ +#define REG_USER_BRIGHTNESS 0x01e4 +#define REG_USER_CONTRAST 0x01e6 +#define REG_USER_SATURATION 0x01e8 +#define REG_USER_SHARPBLUR 0x01ea + +#define REG_G_SPEC_EFFECTS 0x01ee +#define REG_G_ENABLE_PREV 0x01f0 +#define REG_G_ENABLE_PREV_CHG 0x01f2 +#define REG_G_NEW_CFG_SYNC 0x01f8 +#define REG_G_PREVZOOM_IN_WIDTH 0x020a +#define REG_G_PREVZOOM_IN_HEIGHT 0x020c +#define REG_G_PREVZOOM_IN_XOFFS 0x020e +#define REG_G_PREVZOOM_IN_YOFFS 0x0210 +#define REG_G_INPUTS_CHANGE_REQ 0x021a +#define REG_G_ACTIVE_PREV_CFG 0x021c +#define REG_G_PREV_CFG_CHG 0x021e +#define REG_G_PREV_OPEN_AFTER_CH 0x0220 +#define REG_G_PREV_CFG_ERROR 0x0222 + +/* Preview control section. n = 0...4. */ +#define PREG(n, x) ((n) * 0x26 + x) +#define REG_P_OUT_WIDTH(n) PREG(n, 0x0242) +#define REG_P_OUT_HEIGHT(n) PREG(n, 0x0244) +#define REG_P_FMT(n) PREG(n, 0x0246) +#define REG_P_MAX_OUT_RATE(n) PREG(n, 0x0248) +#define REG_P_MIN_OUT_RATE(n) PREG(n, 0x024a) +#define REG_P_PVI_MASK(n) PREG(n, 0x024c) +#define REG_P_CLK_INDEX(n) PREG(n, 0x024e) +#define REG_P_FR_RATE_TYPE(n) PREG(n, 0x0250) +#define FR_RATE_DYNAMIC 0 +#define FR_RATE_FIXED 1 +#define FR_RATE_FIXED_ACCURATE 2 +#define REG_P_FR_RATE_Q_TYPE(n) PREG(n, 0x0252) +#define FR_RATE_Q_BEST_FRRATE 1 /* Binning enabled */ +#define FR_RATE_Q_BEST_QUALITY 2 /* Binning disabled */ +/* Frame period in 0.1 ms units */ +#define REG_P_MAX_FR_TIME(n) PREG(n, 0x0254) +#define REG_P_MIN_FR_TIME(n) PREG(n, 0x0256) +/* Conversion to REG_P_[MAX/MIN]_FR_TIME value; __t: time in us */ +#define US_TO_FR_TIME(__t) ((__t) / 100) +#define S5K6AA_MIN_FR_TIME 33300 /* us */ +#define S5K6AA_MAX_FR_TIME 650000 /* us */ +#define S5K6AA_MAX_HIGHRES_FR_TIME 666 /* x100 us */ +/* The below 5 registers are for "device correction" values */ +#define REG_P_COLORTEMP(n) PREG(n, 0x025e) +#define REG_P_PREV_MIRROR(n) PREG(n, 0x0262) + +/* Extended image property controls */ +/* Exposure time in 10 us units */ +#define REG_SF_USR_EXPOSURE_L 0x03c6 +#define REG_SF_USR_EXPOSURE_H 0x03c8 +#define REG_SF_USR_EXPOSURE_CHG 0x03ca +#define REG_SF_USR_TOT_GAIN 0x03cc +#define REG_SF_USR_TOT_GAIN_CHG 0x03ce +#define REG_SF_RGAIN 0x03d0 +#define REG_SF_RGAIN_CHG 0x03d2 +#define REG_SF_GGAIN 0x03d4 +#define REG_SF_GGAIN_CHG 0x03d6 +#define REG_SF_BGAIN 0x03d8 +#define REG_SF_BGAIN_CHG 0x03da +#define REG_SF_FLICKER_QUANT 0x03dc +#define REG_SF_FLICKER_QUANT_CHG 0x03de + +/* Output interface (parallel/MIPI) setup */ +#define REG_OIF_EN_MIPI_LANES 0x03fa +#define REG_OIF_EN_PACKETS 0x03fc +#define REG_OIF_CFG_CHG 0x03fe + +/* Auto-algorithms enable mask */ +#define REG_DBG_AUTOALG_EN 0x0400 +#define AALG_ALL_EN_MASK (1 << 0) +#define AALG_AE_EN_MASK (1 << 1) +#define AALG_DIVLEI_EN_MASK (1 << 2) +#define AALG_WB_EN_MASK (1 << 3) +#define AALG_FLICKER_EN_MASK (1 << 5) +#define AALG_FIT_EN_MASK (1 << 6) +#define AALG_WRHW_EN_MASK (1 << 7) + +/* Firmware revision information */ +#define REG_FW_APIVER 0x012e +#define S5K6AAFX_FW_APIVER 0x0001 +#define REG_FW_REVISION 0x0130 + +/* For now we use only one user configuration register set */ +#define S5K6AA_MAX_PRESETS 1 + +static const char * const s5k6aa_supply_names[] = { + "vdd_core", /* Digital core supply 1.5V (1.4V to 1.6V) */ + "vdda", /* Analog power supply 2.8V (2.6V to 3.0V) */ + "vdd_reg", /* Regulator input power 1.8V (1.7V to 1.9V) + or 2.8V (2.6V to 3.0) */ + "vddio", /* I/O supply 1.8V (1.65V to 1.95V) + or 2.8V (2.5V to 3.1V) */ +}; +#define S5K6AA_NUM_SUPPLIES ARRAY_SIZE(s5k6aa_supply_names) + +enum s5k6aa_gpio_id { + STBY, + RST, + GPIO_NUM, +}; + +struct s5k6aa_regval { + u16 addr; + u16 val; +}; + +struct s5k6aa_pixfmt { + enum v4l2_mbus_pixelcode code; + u32 colorspace; + /* REG_P_FMT(x) register value */ + u16 reg_p_fmt; +}; + +struct s5k6aa_preset { + /* output pixel format and resolution */ + struct v4l2_mbus_framefmt mbus_fmt; + u8 clk_id; + u8 index; +}; + +struct s5k6aa_ctrls { + struct v4l2_ctrl_handler handler; + /* Auto / manual white balance cluster */ + struct v4l2_ctrl *awb; + struct v4l2_ctrl *gain_red; + struct v4l2_ctrl *gain_blue; + struct v4l2_ctrl *gain_green; + /* Mirror cluster */ + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + /* Auto exposure / manual exposure and gain cluster */ + struct v4l2_ctrl *auto_exp; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *gain; +}; + +struct s5k6aa_interval { + u16 reg_fr_time; + struct v4l2_fract interval; + /* Maximum rectangle for the interval */ + struct v4l2_frmsize_discrete size; +}; + +struct s5k6aa { + struct v4l2_subdev sd; + struct media_pad pad; + + enum v4l2_mbus_type bus_type; + u8 mipi_lanes; + + int (*s_power)(int enable); + struct regulator_bulk_data supplies[S5K6AA_NUM_SUPPLIES]; + struct s5k6aa_gpio gpio[GPIO_NUM]; + + /* external master clock frequency */ + unsigned long mclk_frequency; + /* ISP internal master clock frequency */ + u16 clk_fop; + /* output pixel clock frequency range */ + u16 pclk_fmin; + u16 pclk_fmax; + + unsigned int inv_hflip:1; + unsigned int inv_vflip:1; + + /* protects the struct members below */ + struct mutex lock; + + /* sensor matrix scan window */ + struct v4l2_rect ccd_rect; + + struct s5k6aa_ctrls ctrls; + struct s5k6aa_preset presets[S5K6AA_MAX_PRESETS]; + struct s5k6aa_preset *preset; + const struct s5k6aa_interval *fiv; + + unsigned int streaming:1; + unsigned int apply_cfg:1; + unsigned int apply_crop:1; + unsigned int power; +}; + +static struct s5k6aa_regval s5k6aa_analog_config[] = { + /* Analog settings */ + { 0x112a, 0x0000 }, { 0x1132, 0x0000 }, + { 0x113e, 0x0000 }, { 0x115c, 0x0000 }, + { 0x1164, 0x0000 }, { 0x1174, 0x0000 }, + { 0x1178, 0x0000 }, { 0x077a, 0x0000 }, + { 0x077c, 0x0000 }, { 0x077e, 0x0000 }, + { 0x0780, 0x0000 }, { 0x0782, 0x0000 }, + { 0x0784, 0x0000 }, { 0x0786, 0x0000 }, + { 0x0788, 0x0000 }, { 0x07a2, 0x0000 }, + { 0x07a4, 0x0000 }, { 0x07a6, 0x0000 }, + { 0x07a8, 0x0000 }, { 0x07b6, 0x0000 }, + { 0x07b8, 0x0002 }, { 0x07ba, 0x0004 }, + { 0x07bc, 0x0004 }, { 0x07be, 0x0005 }, + { 0x07c0, 0x0005 }, { S5K6AA_TERM, 0 }, +}; + +/* TODO: Add RGB888 and Bayer format */ +static const struct s5k6aa_pixfmt s5k6aa_formats[] = { + { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 }, + /* range 16-240 */ + { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_REC709, 6 }, + { V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_JPEG, 0 }, +}; + +static const struct s5k6aa_interval s5k6aa_intervals[] = { + { 1000, {10000, 1000000}, {1280, 1024} }, /* 10 fps */ + { 666, {15000, 1000000}, {1280, 1024} }, /* 15 fps */ + { 500, {20000, 1000000}, {1280, 720} }, /* 20 fps */ + { 400, {25000, 1000000}, {640, 480} }, /* 25 fps */ + { 333, {33300, 1000000}, {640, 480} }, /* 30 fps */ +}; + +#define S5K6AA_INTERVAL_DEF_INDEX 1 /* 15 fps */ + +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct s5k6aa, ctrls.handler)->sd; +} + +static inline struct s5k6aa *to_s5k6aa(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s5k6aa, sd); +} + +/* Set initial values for all preview presets */ +static void s5k6aa_presets_data_init(struct s5k6aa *s5k6aa) +{ + struct s5k6aa_preset *preset = &s5k6aa->presets[0]; + int i; + + for (i = 0; i < S5K6AA_MAX_PRESETS; i++) { + preset->mbus_fmt.width = S5K6AA_OUT_WIDTH_DEF; + preset->mbus_fmt.height = S5K6AA_OUT_HEIGHT_DEF; + preset->mbus_fmt.code = s5k6aa_formats[0].code; + preset->index = i; + preset->clk_id = 0; + preset++; + } + + s5k6aa->fiv = &s5k6aa_intervals[S5K6AA_INTERVAL_DEF_INDEX]; + s5k6aa->preset = &s5k6aa->presets[0]; +} + +static int s5k6aa_i2c_read(struct i2c_client *client, u16 addr, u16 *val) +{ + u8 wbuf[2] = {addr >> 8, addr & 0xFF}; + struct i2c_msg msg[2]; + u8 rbuf[2]; + int ret; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 2; + msg[0].buf = wbuf; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 2; + msg[1].buf = rbuf; + + ret = i2c_transfer(client->adapter, msg, 2); + *val = be16_to_cpu(*((u16 *)rbuf)); + + v4l2_dbg(3, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val); + + return ret == 2 ? 0 : ret; +} + +static int s5k6aa_i2c_write(struct i2c_client *client, u16 addr, u16 val) +{ + u8 buf[4] = {addr >> 8, addr & 0xFF, val >> 8, val & 0xFF}; + + int ret = i2c_master_send(client, buf, 4); + v4l2_dbg(3, debug, client, "i2c_write: 0x%04X : 0x%04x\n", addr, val); + + return ret == 4 ? 0 : ret; +} + +/* The command register write, assumes Command_Wr_addH = 0x7000. */ +static int s5k6aa_write(struct i2c_client *c, u16 addr, u16 val) +{ + int ret = s5k6aa_i2c_write(c, REG_CMDWR_ADDRL, addr); + if (ret) + return ret; + return s5k6aa_i2c_write(c, REG_CMDBUF0_ADDR, val); +} + +/* The command register read, assumes Command_Rd_addH = 0x7000. */ +static int s5k6aa_read(struct i2c_client *client, u16 addr, u16 *val) +{ + int ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRL, addr); + if (ret) + return ret; + return s5k6aa_i2c_read(client, REG_CMDBUF0_ADDR, val); +} + +static int s5k6aa_write_array(struct v4l2_subdev *sd, + const struct s5k6aa_regval *msg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u16 addr_incr = 0; + int ret = 0; + + while (msg->addr != S5K6AA_TERM) { + if (addr_incr != 2) + ret = s5k6aa_i2c_write(client, REG_CMDWR_ADDRL, + msg->addr); + if (ret) + break; + ret = s5k6aa_i2c_write(client, REG_CMDBUF0_ADDR, msg->val); + if (ret) + break; + /* Assume that msg->addr is always less than 0xfffc */ + addr_incr = (msg + 1)->addr - msg->addr; + msg++; + } + + return ret; +} + +/* Configure the AHB high address bytes for GTG registers access */ +static int s5k6aa_set_ahb_address(struct i2c_client *client) +{ + int ret = s5k6aa_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH); + if (ret) + return ret; + ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRH, HOST_SWIF_OFFSH); + if (ret) + return ret; + return s5k6aa_i2c_write(client, REG_CMDWR_ADDRH, HOST_SWIF_OFFSH); +} + +/** + * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration + * + * Configure the internal ISP PLL for the required output frequency. + * Locking: called with s5k6aa.lock mutex held. + */ +static int s5k6aa_configure_pixel_clocks(struct s5k6aa *s5k6aa) +{ + struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd); + unsigned long fmclk = s5k6aa->mclk_frequency / 1000; + u16 status; + int ret; + + if (WARN(fmclk < MIN_MCLK_FREQ_KHZ || fmclk > MAX_MCLK_FREQ_KHZ, + "Invalid clock frequency: %ld\n", fmclk)) + return -EINVAL; + + s5k6aa->pclk_fmin = PCLK_FREQ_MIN; + s5k6aa->pclk_fmax = PCLK_FREQ_MAX; + s5k6aa->clk_fop = SYS_PLL_OUT_FREQ; + + /* External input clock frequency in kHz */ + ret = s5k6aa_write(c, REG_I_INCLK_FREQ_H, fmclk >> 16); + if (!ret) + ret = s5k6aa_write(c, REG_I_INCLK_FREQ_L, fmclk & 0xFFFF); + if (!ret) + ret = s5k6aa_write(c, REG_I_USE_NPVI_CLOCKS, 1); + /* Internal PLL frequency */ + if (!ret) + ret = s5k6aa_write(c, REG_I_OPCLK_4KHZ(0), s5k6aa->clk_fop); + if (!ret) + ret = s5k6aa_write(c, REG_I_MIN_OUTRATE_4KHZ(0), + s5k6aa->pclk_fmin); + if (!ret) + ret = s5k6aa_write(c, REG_I_MAX_OUTRATE_4KHZ(0), + s5k6aa->pclk_fmax); + if (!ret) + ret = s5k6aa_write(c, REG_I_INIT_PARAMS_UPDATED, 1); + if (!ret) + ret = s5k6aa_read(c, REG_I_ERROR_INFO, &status); + + return ret ? ret : (status ? -EINVAL : 0); +} + +/* Set horizontal and vertical image flipping */ +static int s5k6aa_set_mirror(struct s5k6aa *s5k6aa, int horiz_flip) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + int index = s5k6aa->preset->index; + + unsigned int vflip = s5k6aa->ctrls.vflip->val ^ s5k6aa->inv_vflip; + unsigned int flip = (horiz_flip ^ s5k6aa->inv_hflip) | (vflip << 1); + + return s5k6aa_write(client, REG_P_PREV_MIRROR(index), flip); +} + +/* Configure auto/manual white balance and R/G/B gains */ +static int s5k6aa_set_awb(struct s5k6aa *s5k6aa, int awb) +{ + struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd); + struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls; + u16 reg; + + int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, ®); + + if (!ret && !awb) { + ret = s5k6aa_write(c, REG_SF_RGAIN, ctrls->gain_red->val); + if (!ret) + ret = s5k6aa_write(c, REG_SF_RGAIN_CHG, 1); + if (ret) + return ret; + + ret = s5k6aa_write(c, REG_SF_GGAIN, ctrls->gain_green->val); + if (!ret) + ret = s5k6aa_write(c, REG_SF_GGAIN_CHG, 1); + if (ret) + return ret; + + ret = s5k6aa_write(c, REG_SF_BGAIN, ctrls->gain_blue->val); + if (!ret) + ret = s5k6aa_write(c, REG_SF_BGAIN_CHG, 1); + } + if (!ret) { + reg = awb ? reg | AALG_WB_EN_MASK : reg & ~AALG_WB_EN_MASK; + ret = s5k6aa_write(c, REG_DBG_AUTOALG_EN, reg); + } + + return ret; +} + +/* Program FW with exposure time, 'exposure' in us units */ +static int s5k6aa_set_user_exposure(struct i2c_client *client, int exposure) +{ + unsigned int time = exposure / 10; + + int ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_L, time & 0xffff); + if (!ret) + ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_H, time >> 16); + if (ret) + return ret; + return s5k6aa_write(client, REG_SF_USR_EXPOSURE_CHG, 1); +} + +static int s5k6aa_set_user_gain(struct i2c_client *client, int gain) +{ + int ret = s5k6aa_write(client, REG_SF_USR_TOT_GAIN, gain); + if (ret) + return ret; + return s5k6aa_write(client, REG_SF_USR_TOT_GAIN_CHG, 1); +} + +/* Set auto/manual exposure and total gain */ +static int s5k6aa_set_auto_exposure(struct s5k6aa *s5k6aa, int value) +{ + struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd); + unsigned int exp_time = s5k6aa->ctrls.exposure->val; + u16 auto_alg; + + int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &auto_alg); + if (ret) + return ret; + + v4l2_dbg(1, debug, c, "man_exp: %d, auto_exp: %d, a_alg: 0x%x\n", + exp_time, value, auto_alg); + + if (value == V4L2_EXPOSURE_AUTO) { + auto_alg |= AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK; + } else { + ret = s5k6aa_set_user_exposure(c, exp_time); + if (ret) + return ret; + ret = s5k6aa_set_user_gain(c, s5k6aa->ctrls.gain->val); + if (ret) + return ret; + auto_alg &= ~(AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK); + } + + return s5k6aa_write(c, REG_DBG_AUTOALG_EN, auto_alg); +} + +static int s5k6aa_set_anti_flicker(struct s5k6aa *s5k6aa, int value) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + u16 auto_alg; + int ret; + + ret = s5k6aa_read(client, REG_DBG_AUTOALG_EN, &auto_alg); + if (ret) + return ret; + + if (value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) { + auto_alg |= AALG_FLICKER_EN_MASK; + } else { + auto_alg &= ~AALG_FLICKER_EN_MASK; + /* The V4L2_CID_LINE_FREQUENCY control values match + * the register values */ + ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT, value); + if (ret) + return ret; + ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT_CHG, 1); + if (ret) + return ret; + } + + return s5k6aa_write(client, REG_DBG_AUTOALG_EN, auto_alg); +} + +static int s5k6aa_set_colorfx(struct s5k6aa *s5k6aa, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + static const struct v4l2_control colorfx[] = { + { V4L2_COLORFX_NONE, 0 }, + { V4L2_COLORFX_BW, 1 }, + { V4L2_COLORFX_NEGATIVE, 2 }, + { V4L2_COLORFX_SEPIA, 3 }, + { V4L2_COLORFX_SKY_BLUE, 4 }, + { V4L2_COLORFX_SKETCH, 5 }, + }; + int i; + + for (i = 0; i < ARRAY_SIZE(colorfx); i++) { + if (colorfx[i].id == val) + return s5k6aa_write(client, REG_G_SPEC_EFFECTS, + colorfx[i].value); + } + return -EINVAL; +} + +static int s5k6aa_preview_config_status(struct i2c_client *client) +{ + u16 error = 0; + int ret = s5k6aa_read(client, REG_G_PREV_CFG_ERROR, &error); + + v4l2_dbg(1, debug, client, "error: 0x%x (%d)\n", error, ret); + return ret ? ret : (error ? -EINVAL : 0); +} + +static int s5k6aa_get_pixfmt_index(struct s5k6aa *s5k6aa, + struct v4l2_mbus_framefmt *mf) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s5k6aa_formats); i++) + if (mf->colorspace == s5k6aa_formats[i].colorspace && + mf->code == s5k6aa_formats[i].code) + return i; + return 0; +} + +static int s5k6aa_set_output_framefmt(struct s5k6aa *s5k6aa, + struct s5k6aa_preset *preset) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + int fmt_index = s5k6aa_get_pixfmt_index(s5k6aa, &preset->mbus_fmt); + int ret; + + ret = s5k6aa_write(client, REG_P_OUT_WIDTH(preset->index), + preset->mbus_fmt.width); + if (!ret) + ret = s5k6aa_write(client, REG_P_OUT_HEIGHT(preset->index), + preset->mbus_fmt.height); + if (!ret) + ret = s5k6aa_write(client, REG_P_FMT(preset->index), + s5k6aa_formats[fmt_index].reg_p_fmt); + return ret; +} + +static int s5k6aa_set_input_params(struct s5k6aa *s5k6aa) +{ + struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd); + struct v4l2_rect *r = &s5k6aa->ccd_rect; + int ret; + + ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width); + if (!ret) + ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height); + if (!ret) + ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left); + if (!ret) + ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top); + if (!ret) + ret = s5k6aa_write(c, REG_G_INPUTS_CHANGE_REQ, 1); + if (!ret) + s5k6aa->apply_crop = 0; + + return ret; +} + +/** + * s5k6aa_configure_video_bus - configure the video output interface + * @bus_type: video bus type: parallel or MIPI-CSI + * @nlanes: number of MIPI lanes to be used (MIPI-CSI only) + * + * Note: Only parallel bus operation has been tested. + */ +static int s5k6aa_configure_video_bus(struct s5k6aa *s5k6aa, + enum v4l2_mbus_type bus_type, int nlanes) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + u16 cfg = 0; + int ret; + + /* + * TODO: The sensor is supposed to support BT.601 and BT.656 + * but there is nothing indicating how to switch between both + * in the datasheet. For now default BT.601 interface is assumed. + */ + if (bus_type == V4L2_MBUS_CSI2) + cfg = nlanes; + else if (bus_type != V4L2_MBUS_PARALLEL) + return -EINVAL; + + ret = s5k6aa_write(client, REG_OIF_EN_MIPI_LANES, cfg); + if (ret) + return ret; + return s5k6aa_write(client, REG_OIF_CFG_CHG, 1); +} + +/* This function should be called when switching to new user configuration set*/ +static int s5k6aa_new_config_sync(struct i2c_client *client, int timeout, + int cid) +{ + unsigned long end = jiffies + msecs_to_jiffies(timeout); + u16 reg = 1; + int ret; + + ret = s5k6aa_write(client, REG_G_ACTIVE_PREV_CFG, cid); + if (!ret) + ret = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1); + if (!ret) + ret = s5k6aa_write(client, REG_G_NEW_CFG_SYNC, 1); + if (timeout == 0) + return ret; + + while (ret >= 0 && time_is_after_jiffies(end)) { + ret = s5k6aa_read(client, REG_G_NEW_CFG_SYNC, ®); + if (!reg) + return 0; + usleep_range(1000, 5000); + } + return ret ? ret : -ETIMEDOUT; +} + +/** + * s5k6aa_set_prev_config - write user preview register set + * + * Configure output resolution and color fromat, pixel clock + * frequency range, device frame rate type and frame period range. + */ +static int s5k6aa_set_prev_config(struct s5k6aa *s5k6aa, + struct s5k6aa_preset *preset) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + int idx = preset->index; + u16 frame_rate_q; + int ret; + + if (s5k6aa->fiv->reg_fr_time >= S5K6AA_MAX_HIGHRES_FR_TIME) + frame_rate_q = FR_RATE_Q_BEST_FRRATE; + else + frame_rate_q = FR_RATE_Q_BEST_QUALITY; + + ret = s5k6aa_set_output_framefmt(s5k6aa, preset); + if (!ret) + ret = s5k6aa_write(client, REG_P_MAX_OUT_RATE(idx), + s5k6aa->pclk_fmax); + if (!ret) + ret = s5k6aa_write(client, REG_P_MIN_OUT_RATE(idx), + s5k6aa->pclk_fmin); + if (!ret) + ret = s5k6aa_write(client, REG_P_CLK_INDEX(idx), + preset->clk_id); + if (!ret) + ret = s5k6aa_write(client, REG_P_FR_RATE_TYPE(idx), + FR_RATE_DYNAMIC); + if (!ret) + ret = s5k6aa_write(client, REG_P_FR_RATE_Q_TYPE(idx), + frame_rate_q); + if (!ret) + ret = s5k6aa_write(client, REG_P_MAX_FR_TIME(idx), + s5k6aa->fiv->reg_fr_time + 33); + if (!ret) + ret = s5k6aa_write(client, REG_P_MIN_FR_TIME(idx), + s5k6aa->fiv->reg_fr_time - 33); + if (!ret) + ret = s5k6aa_new_config_sync(client, 250, idx); + if (!ret) + ret = s5k6aa_preview_config_status(client); + if (!ret) + s5k6aa->apply_cfg = 0; + + v4l2_dbg(1, debug, client, "Frame interval: %d +/- 3.3ms. (%d)\n", + s5k6aa->fiv->reg_fr_time, ret); + return ret; +} + +/** + * s5k6aa_initialize_isp - basic ISP MCU initialization + * + * Configure AHB addresses for registers read/write; configure PLLs for + * required output pixel clock. The ISP power supply needs to be already + * enabled, with an optional H/W reset. + * Locking: called with s5k6aa.lock mutex held. + */ +static int s5k6aa_initialize_isp(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret; + + s5k6aa->apply_crop = 1; + s5k6aa->apply_cfg = 1; + msleep(100); + + ret = s5k6aa_set_ahb_address(client); + if (ret) + return ret; + ret = s5k6aa_configure_video_bus(s5k6aa, s5k6aa->bus_type, + s5k6aa->mipi_lanes); + if (ret) + return ret; + ret = s5k6aa_write_array(sd, s5k6aa_analog_config); + if (ret) + return ret; + msleep(20); + + return s5k6aa_configure_pixel_clocks(s5k6aa); +} + +static int s5k6aa_gpio_set_value(struct s5k6aa *priv, int id, u32 val) +{ + if (!gpio_is_valid(priv->gpio[id].gpio)) + return 0; + gpio_set_value(priv->gpio[id].gpio, !!val); + return 1; +} + +static int s5k6aa_gpio_assert(struct s5k6aa *priv, int id) +{ + return s5k6aa_gpio_set_value(priv, id, priv->gpio[id].level); +} + +static int s5k6aa_gpio_deassert(struct s5k6aa *priv, int id) +{ + return s5k6aa_gpio_set_value(priv, id, !priv->gpio[id].level); +} + +static int __s5k6aa_power_on(struct s5k6aa *s5k6aa) +{ + int ret; + + ret = regulator_bulk_enable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies); + if (ret) + return ret; + if (s5k6aa_gpio_deassert(s5k6aa, STBY)) + usleep_range(150, 200); + + if (s5k6aa->s_power) + ret = s5k6aa->s_power(1); + usleep_range(4000, 4000); + + if (s5k6aa_gpio_deassert(s5k6aa, RST)) + msleep(20); + + return ret; +} + +static int __s5k6aa_power_off(struct s5k6aa *s5k6aa) +{ + int ret; + + if (s5k6aa_gpio_assert(s5k6aa, RST)) + usleep_range(100, 150); + + if (s5k6aa->s_power) { + ret = s5k6aa->s_power(0); + if (ret) + return ret; + } + if (s5k6aa_gpio_assert(s5k6aa, STBY)) + usleep_range(50, 100); + s5k6aa->streaming = 0; + + return regulator_bulk_disable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies); +} + +/* + * V4L2 subdev core and video operations + */ +static int s5k6aa_set_power(struct v4l2_subdev *sd, int on) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret = 0; + + mutex_lock(&s5k6aa->lock); + + if (!on == s5k6aa->power) { + if (on) { + ret = __s5k6aa_power_on(s5k6aa); + if (!ret) + ret = s5k6aa_initialize_isp(sd); + } else { + ret = __s5k6aa_power_off(s5k6aa); + } + + if (!ret) + s5k6aa->power += on ? 1 : -1; + } + + mutex_unlock(&s5k6aa->lock); + + if (!on || ret || s5k6aa->power != 1) + return ret; + + return v4l2_ctrl_handler_setup(sd->ctrl_handler); +} + +static int __s5k6aa_stream(struct s5k6aa *s5k6aa, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + int ret = 0; + + ret = s5k6aa_write(client, REG_G_ENABLE_PREV, enable); + if (!ret) + ret = s5k6aa_write(client, REG_G_ENABLE_PREV_CHG, 1); + if (!ret) + s5k6aa->streaming = enable; + + return ret; +} + +static int s5k6aa_s_stream(struct v4l2_subdev *sd, int on) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret = 0; + + mutex_lock(&s5k6aa->lock); + + if (s5k6aa->streaming == !on) { + if (!ret && s5k6aa->apply_cfg) + ret = s5k6aa_set_prev_config(s5k6aa, s5k6aa->preset); + if (s5k6aa->apply_crop) + ret = s5k6aa_set_input_params(s5k6aa); + if (!ret) + ret = __s5k6aa_stream(s5k6aa, !!on); + } + mutex_unlock(&s5k6aa->lock); + + return ret; +} + +static int s5k6aa_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + + mutex_lock(&s5k6aa->lock); + fi->interval = s5k6aa->fiv->interval; + mutex_unlock(&s5k6aa->lock); + + return 0; +} + +static int __s5k6aa_set_frame_interval(struct s5k6aa *s5k6aa, + struct v4l2_subdev_frame_interval *fi) +{ + struct v4l2_mbus_framefmt *mbus_fmt = &s5k6aa->preset->mbus_fmt; + const struct s5k6aa_interval *fiv = &s5k6aa_intervals[0]; + unsigned int err, min_err = UINT_MAX; + unsigned int i, fr_time; + + if (fi->interval.denominator == 0) + return -EINVAL; + + fr_time = fi->interval.numerator * 10000 / fi->interval.denominator; + + for (i = 0; i < ARRAY_SIZE(s5k6aa_intervals); i++) { + const struct s5k6aa_interval *iv = &s5k6aa_intervals[i]; + + if (mbus_fmt->width > iv->size.width || + mbus_fmt->height > iv->size.height) + continue; + + err = abs(iv->reg_fr_time - fr_time); + if (err < min_err) { + fiv = iv; + min_err = err; + } + } + s5k6aa->fiv = fiv; + + v4l2_dbg(1, debug, &s5k6aa->sd, "Changed frame interval to %d us\n", + fiv->reg_fr_time * 100); + return 0; +} + +static int s5k6aa_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret; + + v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n", + fi->interval.numerator, fi->interval.denominator); + + mutex_lock(&s5k6aa->lock); + ret = __s5k6aa_set_frame_interval(s5k6aa, fi); + s5k6aa->apply_cfg = 1; + + mutex_unlock(&s5k6aa->lock); + return ret; +} + +/* + * V4L2 subdev pad level and video operations + */ +static int s5k6aa_enum_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_interval_enum *fie) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + const struct s5k6aa_interval *fi; + int ret = 0; + + if (fie->index > ARRAY_SIZE(s5k6aa_intervals)) + return -EINVAL; + + v4l_bound_align_image(&fie->width, S5K6AA_WIN_WIDTH_MIN, + S5K6AA_WIN_WIDTH_MAX, 1, + &fie->height, S5K6AA_WIN_HEIGHT_MIN, + S5K6AA_WIN_HEIGHT_MAX, 1, 0); + + mutex_lock(&s5k6aa->lock); + fi = &s5k6aa_intervals[fie->index]; + if (fie->width > fi->size.width || fie->height > fi->size.height) + ret = -EINVAL; + else + fie->interval = fi->interval; + mutex_unlock(&s5k6aa->lock); + + return ret; +} + +static int s5k6aa_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(s5k6aa_formats)) + return -EINVAL; + + code->code = s5k6aa_formats[code->index].code; + return 0; +} + +static int s5k6aa_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + int i = ARRAY_SIZE(s5k6aa_formats); + + if (fse->index > 0) + return -EINVAL; + + while (--i) + if (fse->code == s5k6aa_formats[i].code) + break; + + fse->code = s5k6aa_formats[i].code; + fse->min_width = S5K6AA_WIN_WIDTH_MIN; + fse->max_width = S5K6AA_WIN_WIDTH_MAX; + fse->max_height = S5K6AA_WIN_HEIGHT_MIN; + fse->min_height = S5K6AA_WIN_HEIGHT_MAX; + + return 0; +} + +static struct v4l2_rect * +__s5k6aa_get_crop_rect(struct s5k6aa *s5k6aa, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) + return &s5k6aa->ccd_rect; + + WARN_ON(which != V4L2_SUBDEV_FORMAT_TRY); + return v4l2_subdev_get_try_crop(fh, 0); +} + +static void s5k6aa_try_format(struct s5k6aa *s5k6aa, + struct v4l2_mbus_framefmt *mf) +{ + unsigned int index; + + v4l_bound_align_image(&mf->width, S5K6AA_WIN_WIDTH_MIN, + S5K6AA_WIN_WIDTH_MAX, 1, + &mf->height, S5K6AA_WIN_HEIGHT_MIN, + S5K6AA_WIN_HEIGHT_MAX, 1, 0); + + if (mf->colorspace != V4L2_COLORSPACE_JPEG && + mf->colorspace != V4L2_COLORSPACE_REC709) + mf->colorspace = V4L2_COLORSPACE_JPEG; + + index = s5k6aa_get_pixfmt_index(s5k6aa, mf); + + mf->colorspace = s5k6aa_formats[index].colorspace; + mf->code = s5k6aa_formats[index].code; + mf->field = V4L2_FIELD_NONE; +} + +static int s5k6aa_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + struct v4l2_mbus_framefmt *mf; + + memset(fmt->reserved, 0, sizeof(fmt->reserved)); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, 0); + fmt->format = *mf; + return 0; + } + + mutex_lock(&s5k6aa->lock); + fmt->format = s5k6aa->preset->mbus_fmt; + mutex_unlock(&s5k6aa->lock); + + return 0; +} + +static int s5k6aa_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + struct s5k6aa_preset *preset = s5k6aa->preset; + struct v4l2_mbus_framefmt *mf; + struct v4l2_rect *crop; + int ret = 0; + + mutex_lock(&s5k6aa->lock); + s5k6aa_try_format(s5k6aa, &fmt->format); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + crop = v4l2_subdev_get_try_crop(fh, 0); + } else { + if (s5k6aa->streaming) { + ret = -EBUSY; + } else { + mf = &preset->mbus_fmt; + crop = &s5k6aa->ccd_rect; + s5k6aa->apply_cfg = 1; + } + } + + if (ret == 0) { + struct v4l2_subdev_frame_interval fiv = { + .interval = {0, 1} + }; + + *mf = fmt->format; + /* + * Make sure the crop window is valid, i.e. its size is + * greater than the output window, as the ISP supports + * only down-scaling. + */ + crop->width = clamp_t(unsigned int, crop->width, mf->width, + S5K6AA_WIN_WIDTH_MAX); + crop->height = clamp_t(unsigned int, crop->height, mf->height, + S5K6AA_WIN_HEIGHT_MAX); + crop->left = clamp_t(unsigned int, crop->left, 0, + S5K6AA_WIN_WIDTH_MAX - crop->width); + crop->top = clamp_t(unsigned int, crop->top, 0, + S5K6AA_WIN_HEIGHT_MAX - crop->height); + + /* Reset to minimum possible frame interval */ + ret = __s5k6aa_set_frame_interval(s5k6aa, &fiv); + } + mutex_unlock(&s5k6aa->lock); + + return ret; +} + +static int s5k6aa_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + struct v4l2_rect *rect; + + memset(crop->reserved, 0, sizeof(crop->reserved)); + + mutex_lock(&s5k6aa->lock); + rect = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which); + crop->rect = *rect; + mutex_unlock(&s5k6aa->lock); + + v4l2_dbg(1, debug, sd, "Current crop rectangle: (%d,%d)/%dx%d\n", + rect->left, rect->top, rect->width, rect->height); + + return 0; +} + +static int s5k6aa_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + struct v4l2_mbus_framefmt *mf; + unsigned int max_x, max_y; + struct v4l2_rect *crop_r; + + mutex_lock(&s5k6aa->lock); + crop_r = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which); + + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + mf = &s5k6aa->preset->mbus_fmt; + s5k6aa->apply_crop = 1; + } else { + mf = v4l2_subdev_get_try_format(fh, 0); + } + v4l_bound_align_image(&crop->rect.width, mf->width, + S5K6AA_WIN_WIDTH_MAX, 1, + &crop->rect.height, mf->height, + S5K6AA_WIN_HEIGHT_MAX, 1, 0); + + max_x = (S5K6AA_WIN_WIDTH_MAX - crop->rect.width) & ~1; + max_y = (S5K6AA_WIN_HEIGHT_MAX - crop->rect.height) & ~1; + + crop->rect.left = clamp_t(unsigned int, crop->rect.left, 0, max_x); + crop->rect.top = clamp_t(unsigned int, crop->rect.top, 0, max_y); + + *crop_r = crop->rect; + + mutex_unlock(&s5k6aa->lock); + + v4l2_dbg(1, debug, sd, "Set crop rectangle: (%d,%d)/%dx%d\n", + crop_r->left, crop_r->top, crop_r->width, crop_r->height); + + return 0; +} + +static const struct v4l2_subdev_pad_ops s5k6aa_pad_ops = { + .enum_mbus_code = s5k6aa_enum_mbus_code, + .enum_frame_size = s5k6aa_enum_frame_size, + .enum_frame_interval = s5k6aa_enum_frame_interval, + .get_fmt = s5k6aa_get_fmt, + .set_fmt = s5k6aa_set_fmt, + .get_crop = s5k6aa_get_crop, + .set_crop = s5k6aa_set_crop, +}; + +static const struct v4l2_subdev_video_ops s5k6aa_video_ops = { + .g_frame_interval = s5k6aa_g_frame_interval, + .s_frame_interval = s5k6aa_s_frame_interval, + .s_stream = s5k6aa_s_stream, +}; + +/* + * V4L2 subdev controls + */ + +static int s5k6aa_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int idx, err = 0; + + v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val); + + mutex_lock(&s5k6aa->lock); + /* + * If the device is not powered up by the host driver do + * not apply any controls to H/W at this time. Instead + * the controls will be restored right after power-up. + */ + if (s5k6aa->power == 0) + goto unlock; + idx = s5k6aa->preset->index; + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + err = s5k6aa_set_awb(s5k6aa, ctrl->val); + break; + + case V4L2_CID_BRIGHTNESS: + err = s5k6aa_write(client, REG_USER_BRIGHTNESS, ctrl->val); + break; + + case V4L2_CID_COLORFX: + err = s5k6aa_set_colorfx(s5k6aa, ctrl->val); + break; + + case V4L2_CID_CONTRAST: + err = s5k6aa_write(client, REG_USER_CONTRAST, ctrl->val); + break; + + case V4L2_CID_EXPOSURE_AUTO: + err = s5k6aa_set_auto_exposure(s5k6aa, ctrl->val); + break; + + case V4L2_CID_HFLIP: + err = s5k6aa_set_mirror(s5k6aa, ctrl->val); + if (err) + break; + err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1); + break; + + case V4L2_CID_POWER_LINE_FREQUENCY: + err = s5k6aa_set_anti_flicker(s5k6aa, ctrl->val); + break; + + case V4L2_CID_SATURATION: + err = s5k6aa_write(client, REG_USER_SATURATION, ctrl->val); + break; + + case V4L2_CID_SHARPNESS: + err = s5k6aa_write(client, REG_USER_SHARPBLUR, ctrl->val); + break; + + case V4L2_CID_WHITE_BALANCE_TEMPERATURE: + err = s5k6aa_write(client, REG_P_COLORTEMP(idx), ctrl->val); + if (err) + break; + err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1); + break; + } +unlock: + mutex_unlock(&s5k6aa->lock); + return err; +} + +static const struct v4l2_ctrl_ops s5k6aa_ctrl_ops = { + .s_ctrl = s5k6aa_s_ctrl, +}; + +static int s5k6aa_log_status(struct v4l2_subdev *sd) +{ + v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name); + return 0; +} + +#define V4L2_CID_RED_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1001) +#define V4L2_CID_GREEN_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1002) +#define V4L2_CID_BLUE_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1003) + +static const struct v4l2_ctrl_config s5k6aa_ctrls[] = { + { + .ops = &s5k6aa_ctrl_ops, + .id = V4L2_CID_RED_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Red", + .min = 0, + .max = 256, + .def = 127, + .step = 1, + }, { + .ops = &s5k6aa_ctrl_ops, + .id = V4L2_CID_GREEN_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Green", + .min = 0, + .max = 256, + .def = 127, + .step = 1, + }, { + .ops = &s5k6aa_ctrl_ops, + .id = V4L2_CID_BLUE_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Blue", + .min = 0, + .max = 256, + .def = 127, + .step = 1, + }, +}; + +static int s5k6aa_initialize_ctrls(struct s5k6aa *s5k6aa) +{ + const struct v4l2_ctrl_ops *ops = &s5k6aa_ctrl_ops; + struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + + int ret = v4l2_ctrl_handler_init(hdl, 16); + if (ret) + return ret; + /* Auto white balance cluster */ + ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE, + 0, 1, 1, 1); + ctrls->gain_red = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[0], NULL); + ctrls->gain_green = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[1], NULL); + ctrls->gain_blue = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[2], NULL); + v4l2_ctrl_auto_cluster(4, &ctrls->awb, 0, false); + + ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0); + ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_cluster(2, &ctrls->hflip); + + ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_EXPOSURE_AUTO, + V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); + /* Exposure time: x 1 us */ + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, + 0, 6000000U, 1, 100000U); + /* Total gain: 256 <=> 1x */ + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, + 0, 256, 1, 256); + v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false); + + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO); + + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX, + V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE); + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE, + 0, 256, 1, 0); + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0); + + if (hdl->error) { + ret = hdl->error; + v4l2_ctrl_handler_free(hdl); + return ret; + } + + s5k6aa->sd.ctrl_handler = hdl; + return 0; +} + +/* + * V4L2 subdev internal operations + */ +static int s5k6aa_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); + struct v4l2_rect *crop = v4l2_subdev_get_try_crop(fh, 0); + + format->colorspace = s5k6aa_formats[0].colorspace; + format->code = s5k6aa_formats[0].code; + format->width = S5K6AA_OUT_WIDTH_DEF; + format->height = S5K6AA_OUT_HEIGHT_DEF; + format->field = V4L2_FIELD_NONE; + + crop->width = S5K6AA_WIN_WIDTH_MAX; + crop->height = S5K6AA_WIN_HEIGHT_MAX; + crop->left = 0; + crop->top = 0; + + return 0; +} + +static int s5k6aa_check_fw_revision(struct s5k6aa *s5k6aa) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + u16 api_ver = 0, fw_rev = 0; + + int ret = s5k6aa_set_ahb_address(client); + + if (!ret) + ret = s5k6aa_read(client, REG_FW_APIVER, &api_ver); + if (!ret) + ret = s5k6aa_read(client, REG_FW_REVISION, &fw_rev); + if (ret) { + v4l2_err(&s5k6aa->sd, "FW revision check failed!\n"); + return ret; + } + + v4l2_info(&s5k6aa->sd, "FW API ver.: 0x%X, FW rev.: 0x%X\n", + api_ver, fw_rev); + + return api_ver == S5K6AAFX_FW_APIVER ? 0 : -ENODEV; +} + +static int s5k6aa_registered(struct v4l2_subdev *sd) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret; + + mutex_lock(&s5k6aa->lock); + ret = __s5k6aa_power_on(s5k6aa); + if (!ret) { + msleep(100); + ret = s5k6aa_check_fw_revision(s5k6aa); + __s5k6aa_power_off(s5k6aa); + } + mutex_unlock(&s5k6aa->lock); + + return ret; +} + +static const struct v4l2_subdev_internal_ops s5k6aa_subdev_internal_ops = { + .registered = s5k6aa_registered, + .open = s5k6aa_open, +}; + +static const struct v4l2_subdev_core_ops s5k6aa_core_ops = { + .s_power = s5k6aa_set_power, + .log_status = s5k6aa_log_status, +}; + +static const struct v4l2_subdev_ops s5k6aa_subdev_ops = { + .core = &s5k6aa_core_ops, + .pad = &s5k6aa_pad_ops, + .video = &s5k6aa_video_ops, +}; + +/* + * GPIO setup + */ +static int s5k6aa_configure_gpio(int nr, int val, const char *name) +{ + unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + int ret; + + if (!gpio_is_valid(nr)) + return 0; + ret = gpio_request_one(nr, flags, name); + if (!ret) + gpio_export(nr, 0); + return ret; +} + +static void s5k6aa_free_gpios(struct s5k6aa *s5k6aa) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s5k6aa->gpio); i++) { + if (!gpio_is_valid(s5k6aa->gpio[i].gpio)) + continue; + gpio_free(s5k6aa->gpio[i].gpio); + s5k6aa->gpio[i].gpio = -EINVAL; + } +} + +static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa, + const struct s5k6aa_platform_data *pdata) +{ + const struct s5k6aa_gpio *gpio = &pdata->gpio_stby; + int ret; + + s5k6aa->gpio[STBY].gpio = -EINVAL; + s5k6aa->gpio[RST].gpio = -EINVAL; + + ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_STBY"); + if (ret) { + s5k6aa_free_gpios(s5k6aa); + return ret; + } + s5k6aa->gpio[STBY] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + gpio = &pdata->gpio_reset; + ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_RST"); + if (ret) { + s5k6aa_free_gpios(s5k6aa); + return ret; + } + s5k6aa->gpio[RST] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + return 0; +} + +static int s5k6aa_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct s5k6aa_platform_data *pdata = client->dev.platform_data; + struct v4l2_subdev *sd; + struct s5k6aa *s5k6aa; + int i, ret; + + if (pdata == NULL) { + dev_err(&client->dev, "Platform data not specified\n"); + return -EINVAL; + } + + if (pdata->mclk_frequency == 0) { + dev_err(&client->dev, "MCLK frequency not specified\n"); + return -EINVAL; + } + + s5k6aa = devm_kzalloc(&client->dev, sizeof(*s5k6aa), GFP_KERNEL); + if (!s5k6aa) + return -ENOMEM; + + mutex_init(&s5k6aa->lock); + + s5k6aa->mclk_frequency = pdata->mclk_frequency; + s5k6aa->bus_type = pdata->bus_type; + s5k6aa->mipi_lanes = pdata->nlanes; + s5k6aa->s_power = pdata->set_power; + s5k6aa->inv_hflip = pdata->horiz_flip; + s5k6aa->inv_vflip = pdata->vert_flip; + + sd = &s5k6aa->sd; + v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops); + strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name)); + + sd->internal_ops = &s5k6aa_subdev_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad, 0); + if (ret) + return ret; + + ret = s5k6aa_configure_gpios(s5k6aa, pdata); + if (ret) + goto out_err2; + + for (i = 0; i < S5K6AA_NUM_SUPPLIES; i++) + s5k6aa->supplies[i].supply = s5k6aa_supply_names[i]; + + ret = devm_regulator_bulk_get(&client->dev, S5K6AA_NUM_SUPPLIES, + s5k6aa->supplies); + if (ret) { + dev_err(&client->dev, "Failed to get regulators\n"); + goto out_err3; + } + + ret = s5k6aa_initialize_ctrls(s5k6aa); + if (ret) + goto out_err3; + + s5k6aa_presets_data_init(s5k6aa); + + s5k6aa->ccd_rect.width = S5K6AA_WIN_WIDTH_MAX; + s5k6aa->ccd_rect.height = S5K6AA_WIN_HEIGHT_MAX; + s5k6aa->ccd_rect.left = 0; + s5k6aa->ccd_rect.top = 0; + + return 0; + +out_err3: + s5k6aa_free_gpios(s5k6aa); +out_err2: + media_entity_cleanup(&s5k6aa->sd.entity); + return ret; +} + +static int s5k6aa_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + media_entity_cleanup(&sd->entity); + s5k6aa_free_gpios(s5k6aa); + + return 0; +} + +static const struct i2c_device_id s5k6aa_id[] = { + { DRIVER_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, s5k6aa_id); + + +static struct i2c_driver s5k6aa_i2c_driver = { + .driver = { + .name = DRIVER_NAME + }, + .probe = s5k6aa_probe, + .remove = s5k6aa_remove, + .id_table = s5k6aa_id, +}; + +module_i2c_driver(s5k6aa_i2c_driver); + +MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver"); +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/saa6588.c b/drivers/media/i2c/saa6588.c new file mode 100644 index 00000000..b4e1ccbd --- /dev/null +++ b/drivers/media/i2c/saa6588.c @@ -0,0 +1,542 @@ +/* + Driver for SAA6588 RDS decoder + + (c) 2005 Hans J. Koch + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + + +/* insmod options */ +static unsigned int debug; +static unsigned int xtal; +static unsigned int mmbs; +static unsigned int plvl; +static unsigned int bufblocks = 100; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); +module_param(xtal, int, 0); +MODULE_PARM_DESC(xtal, "select oscillator frequency (0..3), default 0"); +module_param(mmbs, int, 0); +MODULE_PARM_DESC(mmbs, "enable MMBS mode: 0=off (default), 1=on"); +module_param(plvl, int, 0); +MODULE_PARM_DESC(plvl, "select pause level (0..3), default 0"); +module_param(bufblocks, int, 0); +MODULE_PARM_DESC(bufblocks, "number of buffered blocks, default 100"); + +MODULE_DESCRIPTION("v4l2 driver module for SAA6588 RDS decoder"); +MODULE_AUTHOR("Hans J. Koch "); + +MODULE_LICENSE("GPL"); + +/* ---------------------------------------------------------------------- */ + +#define UNSET (-1U) +#define PREFIX "saa6588: " +#define dprintk if (debug) printk + +struct saa6588 { + struct v4l2_subdev sd; + struct delayed_work work; + spinlock_t lock; + unsigned char *buffer; + unsigned int buf_size; + unsigned int rd_index; + unsigned int wr_index; + unsigned int block_count; + unsigned char last_blocknum; + wait_queue_head_t read_queue; + int data_available_for_read; + u8 sync; +}; + +static inline struct saa6588 *to_saa6588(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa6588, sd); +} + +/* ---------------------------------------------------------------------- */ + +/* + * SAA6588 defines + */ + +/* Initialization and mode control byte (0w) */ + +/* bit 0+1 (DAC0/DAC1) */ +#define cModeStandard 0x00 +#define cModeFastPI 0x01 +#define cModeReducedRequest 0x02 +#define cModeInvalid 0x03 + +/* bit 2 (RBDS) */ +#define cProcessingModeRDS 0x00 +#define cProcessingModeRBDS 0x04 + +/* bit 3+4 (SYM0/SYM1) */ +#define cErrCorrectionNone 0x00 +#define cErrCorrection2Bits 0x08 +#define cErrCorrection5Bits 0x10 +#define cErrCorrectionNoneRBDS 0x18 + +/* bit 5 (NWSY) */ +#define cSyncNormal 0x00 +#define cSyncRestart 0x20 + +/* bit 6 (TSQD) */ +#define cSigQualityDetectOFF 0x00 +#define cSigQualityDetectON 0x40 + +/* bit 7 (SQCM) */ +#define cSigQualityTriggered 0x00 +#define cSigQualityContinous 0x80 + +/* Pause level and flywheel control byte (1w) */ + +/* bits 0..5 (FEB0..FEB5) */ +#define cFlywheelMaxBlocksMask 0x3F +#define cFlywheelDefault 0x20 + +/* bits 6+7 (PL0/PL1) */ +#define cPauseLevel_11mV 0x00 +#define cPauseLevel_17mV 0x40 +#define cPauseLevel_27mV 0x80 +#define cPauseLevel_43mV 0xC0 + +/* Pause time/oscillator frequency/quality detector control byte (1w) */ + +/* bits 0..4 (SQS0..SQS4) */ +#define cQualityDetectSensMask 0x1F +#define cQualityDetectDefault 0x0F + +/* bit 5 (SOSC) */ +#define cSelectOscFreqOFF 0x00 +#define cSelectOscFreqON 0x20 + +/* bit 6+7 (PTF0/PTF1) */ +#define cOscFreq_4332kHz 0x00 +#define cOscFreq_8664kHz 0x40 +#define cOscFreq_12996kHz 0x80 +#define cOscFreq_17328kHz 0xC0 + +/* ---------------------------------------------------------------------- */ + +static int block_to_user_buf(struct saa6588 *s, unsigned char __user *user_buf) +{ + int i; + + if (s->rd_index == s->wr_index) { + if (debug > 2) + dprintk(PREFIX "Read: buffer empty.\n"); + return 0; + } + + if (debug > 2) { + dprintk(PREFIX "Read: "); + for (i = s->rd_index; i < s->rd_index + 3; i++) + dprintk("0x%02x ", s->buffer[i]); + } + + if (copy_to_user(user_buf, &s->buffer[s->rd_index], 3)) + return -EFAULT; + + s->rd_index += 3; + if (s->rd_index >= s->buf_size) + s->rd_index = 0; + s->block_count--; + + if (debug > 2) + dprintk("%d blocks total.\n", s->block_count); + + return 1; +} + +static void read_from_buf(struct saa6588 *s, struct saa6588_command *a) +{ + unsigned long flags; + + unsigned char __user *buf_ptr = a->buffer; + unsigned int i; + unsigned int rd_blocks; + + a->result = 0; + if (!a->buffer) + return; + + while (!s->data_available_for_read) { + int ret = wait_event_interruptible(s->read_queue, + s->data_available_for_read); + if (ret == -ERESTARTSYS) { + a->result = -EINTR; + return; + } + } + + spin_lock_irqsave(&s->lock, flags); + rd_blocks = a->block_count; + if (rd_blocks > s->block_count) + rd_blocks = s->block_count; + + if (!rd_blocks) { + spin_unlock_irqrestore(&s->lock, flags); + return; + } + + for (i = 0; i < rd_blocks; i++) { + if (block_to_user_buf(s, buf_ptr)) { + buf_ptr += 3; + a->result++; + } else + break; + } + a->result *= 3; + s->data_available_for_read = (s->block_count > 0); + spin_unlock_irqrestore(&s->lock, flags); +} + +static void block_to_buf(struct saa6588 *s, unsigned char *blockbuf) +{ + unsigned int i; + + if (debug > 3) + dprintk(PREFIX "New block: "); + + for (i = 0; i < 3; ++i) { + if (debug > 3) + dprintk("0x%02x ", blockbuf[i]); + s->buffer[s->wr_index] = blockbuf[i]; + s->wr_index++; + } + + if (s->wr_index >= s->buf_size) + s->wr_index = 0; + + if (s->wr_index == s->rd_index) { + s->rd_index += 3; + if (s->rd_index >= s->buf_size) + s->rd_index = 0; + } else + s->block_count++; + + if (debug > 3) + dprintk("%d blocks total.\n", s->block_count); +} + +static void saa6588_i2c_poll(struct saa6588 *s) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s->sd); + unsigned long flags; + unsigned char tmpbuf[6]; + unsigned char blocknum; + unsigned char tmp; + + /* Although we only need 3 bytes, we have to read at least 6. + SAA6588 returns garbage otherwise. */ + if (6 != i2c_master_recv(client, &tmpbuf[0], 6)) { + if (debug > 1) + dprintk(PREFIX "read error!\n"); + return; + } + + s->sync = tmpbuf[0] & 0x10; + if (!s->sync) + return; + blocknum = tmpbuf[0] >> 5; + if (blocknum == s->last_blocknum) { + if (debug > 3) + dprintk("Saw block %d again.\n", blocknum); + return; + } + + s->last_blocknum = blocknum; + + /* + Byte order according to v4l2 specification: + + Byte 0: Least Significant Byte of RDS Block + Byte 1: Most Significant Byte of RDS Block + Byte 2 Bit 7: Error bit. Indicates that an uncorrectable error + occurred during reception of this block. + Bit 6: Corrected bit. Indicates that an error was + corrected for this data block. + Bits 5-3: Same as bits 0-2. + Bits 2-0: Block number. + + SAA6588 byte order is Status-MSB-LSB, so we have to swap the + first and the last of the 3 bytes block. + */ + + tmp = tmpbuf[2]; + tmpbuf[2] = tmpbuf[0]; + tmpbuf[0] = tmp; + + /* Map 'Invalid block E' to 'Invalid Block' */ + if (blocknum == 6) + blocknum = V4L2_RDS_BLOCK_INVALID; + /* And if are not in mmbs mode, then 'Block E' is also mapped + to 'Invalid Block'. As far as I can tell MMBS is discontinued, + and if there is ever a need to support E blocks, then please + contact the linux-media mailinglist. */ + else if (!mmbs && blocknum == 5) + blocknum = V4L2_RDS_BLOCK_INVALID; + tmp = blocknum; + tmp |= blocknum << 3; /* Received offset == Offset Name (OK ?) */ + if ((tmpbuf[2] & 0x03) == 0x03) + tmp |= V4L2_RDS_BLOCK_ERROR; /* uncorrectable error */ + else if ((tmpbuf[2] & 0x03) != 0x00) + tmp |= V4L2_RDS_BLOCK_CORRECTED; /* corrected error */ + tmpbuf[2] = tmp; /* Is this enough ? Should we also check other bits ? */ + + spin_lock_irqsave(&s->lock, flags); + block_to_buf(s, tmpbuf); + spin_unlock_irqrestore(&s->lock, flags); + s->data_available_for_read = 1; + wake_up_interruptible(&s->read_queue); +} + +static void saa6588_work(struct work_struct *work) +{ + struct saa6588 *s = container_of(work, struct saa6588, work.work); + + saa6588_i2c_poll(s); + schedule_delayed_work(&s->work, msecs_to_jiffies(20)); +} + +static void saa6588_configure(struct saa6588 *s) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s->sd); + unsigned char buf[3]; + int rc; + + buf[0] = cSyncRestart; + if (mmbs) + buf[0] |= cProcessingModeRBDS; + + buf[1] = cFlywheelDefault; + switch (plvl) { + case 0: + buf[1] |= cPauseLevel_11mV; + break; + case 1: + buf[1] |= cPauseLevel_17mV; + break; + case 2: + buf[1] |= cPauseLevel_27mV; + break; + case 3: + buf[1] |= cPauseLevel_43mV; + break; + default: /* nothing */ + break; + } + + buf[2] = cQualityDetectDefault | cSelectOscFreqON; + + switch (xtal) { + case 0: + buf[2] |= cOscFreq_4332kHz; + break; + case 1: + buf[2] |= cOscFreq_8664kHz; + break; + case 2: + buf[2] |= cOscFreq_12996kHz; + break; + case 3: + buf[2] |= cOscFreq_17328kHz; + break; + default: /* nothing */ + break; + } + + dprintk(PREFIX "writing: 0w=0x%02x 1w=0x%02x 2w=0x%02x\n", + buf[0], buf[1], buf[2]); + + rc = i2c_master_send(client, buf, 3); + if (rc != 3) + printk(PREFIX "i2c i/o error: rc == %d (should be 3)\n", rc); +} + +/* ---------------------------------------------------------------------- */ + +static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct saa6588 *s = to_saa6588(sd); + struct saa6588_command *a = arg; + + switch (cmd) { + /* --- open() for /dev/radio --- */ + case SAA6588_CMD_OPEN: + a->result = 0; /* return error if chip doesn't work ??? */ + break; + /* --- close() for /dev/radio --- */ + case SAA6588_CMD_CLOSE: + s->data_available_for_read = 1; + wake_up_interruptible(&s->read_queue); + a->result = 0; + break; + /* --- read() for /dev/radio --- */ + case SAA6588_CMD_READ: + read_from_buf(s, a); + break; + /* --- poll() for /dev/radio --- */ + case SAA6588_CMD_POLL: + a->result = 0; + if (s->data_available_for_read) { + a->result |= POLLIN | POLLRDNORM; + } + poll_wait(a->instance, &s->read_queue, a->event_list); + break; + + default: + /* nothing */ + return -ENOIOCTLCMD; + } + return 0; +} + +static int saa6588_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa6588 *s = to_saa6588(sd); + + vt->capability |= V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO; + if (s->sync) + vt->rxsubchans |= V4L2_TUNER_SUB_RDS; + return 0; +} + +static int saa6588_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct saa6588 *s = to_saa6588(sd); + + saa6588_configure(s); + return 0; +} + +static int saa6588_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA6588, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa6588_core_ops = { + .g_chip_ident = saa6588_g_chip_ident, + .ioctl = saa6588_ioctl, +}; + +static const struct v4l2_subdev_tuner_ops saa6588_tuner_ops = { + .g_tuner = saa6588_g_tuner, + .s_tuner = saa6588_s_tuner, +}; + +static const struct v4l2_subdev_ops saa6588_ops = { + .core = &saa6588_core_ops, + .tuner = &saa6588_tuner_ops, +}; + +/* ---------------------------------------------------------------------- */ + +static int saa6588_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa6588 *s; + struct v4l2_subdev *sd; + + v4l_info(client, "saa6588 found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (s == NULL) + return -ENOMEM; + + s->buf_size = bufblocks * 3; + + s->buffer = kmalloc(s->buf_size, GFP_KERNEL); + if (s->buffer == NULL) { + kfree(s); + return -ENOMEM; + } + sd = &s->sd; + v4l2_i2c_subdev_init(sd, client, &saa6588_ops); + spin_lock_init(&s->lock); + s->block_count = 0; + s->wr_index = 0; + s->rd_index = 0; + s->last_blocknum = 0xff; + init_waitqueue_head(&s->read_queue); + s->data_available_for_read = 0; + + saa6588_configure(s); + + /* start polling via eventd */ + INIT_DELAYED_WORK(&s->work, saa6588_work); + schedule_delayed_work(&s->work, 0); + return 0; +} + +static int saa6588_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct saa6588 *s = to_saa6588(sd); + + v4l2_device_unregister_subdev(sd); + + cancel_delayed_work_sync(&s->work); + + kfree(s->buffer); + kfree(s); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa6588_id[] = { + { "saa6588", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa6588_id); + +static struct i2c_driver saa6588_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa6588", + }, + .probe = saa6588_probe, + .remove = saa6588_remove, + .id_table = saa6588_id, +}; + +module_i2c_driver(saa6588_driver); diff --git a/drivers/media/i2c/saa7110.c b/drivers/media/i2c/saa7110.c new file mode 100644 index 00000000..51cd4c8f --- /dev/null +++ b/drivers/media/i2c/saa7110.c @@ -0,0 +1,494 @@ +/* + * saa7110 - Philips SAA7110(A) video decoder driver + * + * Copyright (C) 1998 Pauline Middelink + * + * Copyright (C) 1999 Wolfgang Scherr + * Copyright (C) 2000 Serguei Miridonov + * - some corrections for Pinnacle Systems Inc. DC10plus card. + * + * Changes by Ronald Bultje + * - moved over to linux>=2.4.x i2c protocol (1/1/2003) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Philips SAA7110 video decoder driver"); +MODULE_AUTHOR("Pauline Middelink"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */ +#define SAA7110_MAX_OUTPUT 1 /* 1 YUV */ + +#define SAA7110_NR_REG 0x35 + +struct saa7110 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + u8 reg[SAA7110_NR_REG]; + + v4l2_std_id norm; + int input; + int enable; + + wait_queue_head_t wq; +}; + +static inline struct saa7110 *to_saa7110(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa7110, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct saa7110, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ +/* I2C support functions */ +/* ----------------------------------------------------------------------- */ + +static int saa7110_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7110 *decoder = to_saa7110(sd); + + decoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int saa7110_write_block(struct v4l2_subdev *sd, const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7110 *decoder = to_saa7110(sd); + int ret = -1; + u8 reg = *data; /* first register to write to */ + + /* Sanity check */ + if (reg + (len - 1) > SAA7110_NR_REG) + return ret; + + /* the saa7110 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + ret = i2c_master_send(client, data, len); + + /* Cache the written data */ + memcpy(decoder->reg + reg, data + 1, len - 1); + } else { + for (++data, --len; len; len--) { + ret = saa7110_write(sd, reg++, *data++); + if (ret < 0) + break; + } + } + + return ret; +} + +static inline int saa7110_read(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte(client); +} + +/* ----------------------------------------------------------------------- */ +/* SAA7110 functions */ +/* ----------------------------------------------------------------------- */ + +#define FRESP_06H_COMPST 0x03 /*0x13*/ +#define FRESP_06H_SVIDEO 0x83 /*0xC0*/ + + +static int saa7110_selmux(struct v4l2_subdev *sd, int chan) +{ + static const unsigned char modes[9][8] = { + /* mode 0 */ + {FRESP_06H_COMPST, 0xD9, 0x17, 0x40, 0x03, + 0x44, 0x75, 0x16}, + /* mode 1 */ + {FRESP_06H_COMPST, 0xD8, 0x17, 0x40, 0x03, + 0x44, 0x75, 0x16}, + /* mode 2 */ + {FRESP_06H_COMPST, 0xBA, 0x07, 0x91, 0x03, + 0x60, 0xB5, 0x05}, + /* mode 3 */ + {FRESP_06H_COMPST, 0xB8, 0x07, 0x91, 0x03, + 0x60, 0xB5, 0x05}, + /* mode 4 */ + {FRESP_06H_COMPST, 0x7C, 0x07, 0xD2, 0x83, + 0x60, 0xB5, 0x03}, + /* mode 5 */ + {FRESP_06H_COMPST, 0x78, 0x07, 0xD2, 0x83, + 0x60, 0xB5, 0x03}, + /* mode 6 */ + {FRESP_06H_SVIDEO, 0x59, 0x17, 0x42, 0xA3, + 0x44, 0x75, 0x12}, + /* mode 7 */ + {FRESP_06H_SVIDEO, 0x9A, 0x17, 0xB1, 0x13, + 0x60, 0xB5, 0x14}, + /* mode 8 */ + {FRESP_06H_SVIDEO, 0x3C, 0x27, 0xC1, 0x23, + 0x44, 0x75, 0x21} + }; + struct saa7110 *decoder = to_saa7110(sd); + const unsigned char *ptr = modes[chan]; + + saa7110_write(sd, 0x06, ptr[0]); /* Luminance control */ + saa7110_write(sd, 0x20, ptr[1]); /* Analog Control #1 */ + saa7110_write(sd, 0x21, ptr[2]); /* Analog Control #2 */ + saa7110_write(sd, 0x22, ptr[3]); /* Mixer Control #1 */ + saa7110_write(sd, 0x2C, ptr[4]); /* Mixer Control #2 */ + saa7110_write(sd, 0x30, ptr[5]); /* ADCs gain control */ + saa7110_write(sd, 0x31, ptr[6]); /* Mixer Control #3 */ + saa7110_write(sd, 0x21, ptr[7]); /* Analog Control #2 */ + decoder->input = chan; + + return 0; +} + +static const unsigned char initseq[1 + SAA7110_NR_REG] = { + 0, 0x4C, 0x3C, 0x0D, 0xEF, 0xBD, 0xF2, 0x03, 0x00, + /* 0x08 */ 0xF8, 0xF8, 0x60, 0x60, 0x00, 0x86, 0x18, 0x90, + /* 0x10 */ 0x00, 0x59, 0x40, 0x46, 0x42, 0x1A, 0xFF, 0xDA, + /* 0x18 */ 0xF2, 0x8B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x20 */ 0xD9, 0x16, 0x40, 0x41, 0x80, 0x41, 0x80, 0x4F, + /* 0x28 */ 0xFE, 0x01, 0xCF, 0x0F, 0x03, 0x01, 0x03, 0x0C, + /* 0x30 */ 0x44, 0x71, 0x02, 0x8C, 0x02 +}; + +static v4l2_std_id determine_norm(struct v4l2_subdev *sd) +{ + DEFINE_WAIT(wait); + struct saa7110 *decoder = to_saa7110(sd); + int status; + + /* mode changed, start automatic detection */ + saa7110_write_block(sd, initseq, sizeof(initseq)); + saa7110_selmux(sd, decoder->input); + prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE); + schedule_timeout(msecs_to_jiffies(250)); + finish_wait(&decoder->wq, &wait); + status = saa7110_read(sd); + if (status & 0x40) { + v4l2_dbg(1, debug, sd, "status=0x%02x (no signal)\n", status); + return decoder->norm; /* no change*/ + } + if ((status & 3) == 0) { + saa7110_write(sd, 0x06, 0x83); + if (status & 0x20) { + v4l2_dbg(1, debug, sd, "status=0x%02x (NTSC/no color)\n", status); + /*saa7110_write(sd,0x2E,0x81);*/ + return V4L2_STD_NTSC; + } + v4l2_dbg(1, debug, sd, "status=0x%02x (PAL/no color)\n", status); + /*saa7110_write(sd,0x2E,0x9A);*/ + return V4L2_STD_PAL; + } + /*saa7110_write(sd,0x06,0x03);*/ + if (status & 0x20) { /* 60Hz */ + v4l2_dbg(1, debug, sd, "status=0x%02x (NTSC)\n", status); + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x50); + saa7110_write(sd, 0x11, 0x2C); + /*saa7110_write(sd,0x2E,0x81);*/ + return V4L2_STD_NTSC; + } + + /* 50Hz -> PAL/SECAM */ + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x10); + saa7110_write(sd, 0x11, 0x59); + /*saa7110_write(sd,0x2E,0x9A);*/ + + prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE); + schedule_timeout(msecs_to_jiffies(250)); + finish_wait(&decoder->wq, &wait); + + status = saa7110_read(sd); + if ((status & 0x03) == 0x01) { + v4l2_dbg(1, debug, sd, "status=0x%02x (SECAM)\n", status); + saa7110_write(sd, 0x0D, 0x87); + return V4L2_STD_SECAM; + } + v4l2_dbg(1, debug, sd, "status=0x%02x (PAL)\n", status); + return V4L2_STD_PAL; +} + +static int saa7110_g_input_status(struct v4l2_subdev *sd, u32 *pstatus) +{ + struct saa7110 *decoder = to_saa7110(sd); + int res = V4L2_IN_ST_NO_SIGNAL; + int status = saa7110_read(sd); + + v4l2_dbg(1, debug, sd, "status=0x%02x norm=%llx\n", + status, (unsigned long long)decoder->norm); + if (!(status & 0x40)) + res = 0; + if (!(status & 0x03)) + res |= V4L2_IN_ST_NO_COLOR; + + *pstatus = res; + return 0; +} + +static int saa7110_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + *(v4l2_std_id *)std = determine_norm(sd); + return 0; +} + +static int saa7110_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa7110 *decoder = to_saa7110(sd); + + if (decoder->norm != std) { + decoder->norm = std; + /*saa7110_write(sd, 0x06, 0x03);*/ + if (std & V4L2_STD_NTSC) { + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x50); + saa7110_write(sd, 0x11, 0x2C); + /*saa7110_write(sd, 0x2E, 0x81);*/ + v4l2_dbg(1, debug, sd, "switched to NTSC\n"); + } else if (std & V4L2_STD_PAL) { + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x10); + saa7110_write(sd, 0x11, 0x59); + /*saa7110_write(sd, 0x2E, 0x9A);*/ + v4l2_dbg(1, debug, sd, "switched to PAL\n"); + } else if (std & V4L2_STD_SECAM) { + saa7110_write(sd, 0x0D, 0x87); + saa7110_write(sd, 0x0F, 0x10); + saa7110_write(sd, 0x11, 0x59); + /*saa7110_write(sd, 0x2E, 0x9A);*/ + v4l2_dbg(1, debug, sd, "switched to SECAM\n"); + } else { + return -EINVAL; + } + } + return 0; +} + +static int saa7110_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa7110 *decoder = to_saa7110(sd); + + if (input >= SAA7110_MAX_INPUT) { + v4l2_dbg(1, debug, sd, "input=%d not available\n", input); + return -EINVAL; + } + if (decoder->input != input) { + saa7110_selmux(sd, input); + v4l2_dbg(1, debug, sd, "switched to input=%d\n", input); + } + return 0; +} + +static int saa7110_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct saa7110 *decoder = to_saa7110(sd); + + if (decoder->enable != enable) { + decoder->enable = enable; + saa7110_write(sd, 0x0E, enable ? 0x18 : 0x80); + v4l2_dbg(1, debug, sd, "YUV %s\n", enable ? "on" : "off"); + } + return 0; +} + +static int saa7110_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + saa7110_write(sd, 0x19, ctrl->val); + break; + case V4L2_CID_CONTRAST: + saa7110_write(sd, 0x13, ctrl->val); + break; + case V4L2_CID_SATURATION: + saa7110_write(sd, 0x12, ctrl->val); + break; + case V4L2_CID_HUE: + saa7110_write(sd, 0x07, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +static int saa7110_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7110, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops saa7110_ctrl_ops = { + .s_ctrl = saa7110_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops saa7110_core_ops = { + .g_chip_ident = saa7110_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = saa7110_s_std, +}; + +static const struct v4l2_subdev_video_ops saa7110_video_ops = { + .s_routing = saa7110_s_routing, + .s_stream = saa7110_s_stream, + .querystd = saa7110_querystd, + .g_input_status = saa7110_g_input_status, +}; + +static const struct v4l2_subdev_ops saa7110_ops = { + .core = &saa7110_core_ops, + .video = &saa7110_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int saa7110_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa7110 *decoder; + struct v4l2_subdev *sd; + int rv; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &saa7110_ops); + decoder->norm = V4L2_STD_PAL; + decoder->input = 0; + decoder->enable = 1; + v4l2_ctrl_handler_init(&decoder->hdl, 2); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + + init_waitqueue_head(&decoder->wq); + + rv = saa7110_write_block(sd, initseq, sizeof(initseq)); + if (rv < 0) { + v4l2_dbg(1, debug, sd, "init status %d\n", rv); + } else { + int ver, status; + saa7110_write(sd, 0x21, 0x10); + saa7110_write(sd, 0x0e, 0x18); + saa7110_write(sd, 0x0D, 0x04); + ver = saa7110_read(sd); + saa7110_write(sd, 0x0D, 0x06); + /*mdelay(150);*/ + status = saa7110_read(sd); + v4l2_dbg(1, debug, sd, "version %x, status=0x%02x\n", + ver, status); + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x10); + saa7110_write(sd, 0x11, 0x59); + /*saa7110_write(sd, 0x2E, 0x9A);*/ + } + + /*saa7110_selmux(sd,0);*/ + /*determine_norm(sd);*/ + /* setup and implicit mode 0 select has been performed */ + + return 0; +} + +static int saa7110_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct saa7110 *decoder = to_saa7110(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa7110_id[] = { + { "saa7110", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7110_id); + +static struct i2c_driver saa7110_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7110", + }, + .probe = saa7110_probe, + .remove = saa7110_remove, + .id_table = saa7110_id, +}; + +module_i2c_driver(saa7110_driver); diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c new file mode 100644 index 00000000..52c717d9 --- /dev/null +++ b/drivers/media/i2c/saa7115.c @@ -0,0 +1,1740 @@ +/* saa711x - Philips SAA711x video decoder driver + * This driver can work with saa7111, saa7111a, saa7113, saa7114, + * saa7115 and saa7118. + * + * Based on saa7114 driver by Maxim Yevtyushkin, which is based on + * the saa7111 driver by Dave Perks. + * + * Copyright (C) 1998 Dave Perks + * Copyright (C) 2002 Maxim Yevtyushkin + * + * Slight changes for video timing and attachment output by + * Wolfgang Scherr + * + * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003) + * by Ronald Bultje + * + * Added saa7115 support by Kevin Thayer + * (2/17/2003) + * + * VBI support (2004) and cleanups (2005) by Hans Verkuil + * + * Copyright (c) 2005-2006 Mauro Carvalho Chehab + * SAA7111, SAA7113 and SAA7118 support + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include "saa711x_regs.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VRES_60HZ (480+16) + +MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver"); +MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " + "Hans Verkuil, Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL"); + +static bool debug; +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +struct saa711x_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + + struct { + /* chroma gain control cluster */ + struct v4l2_ctrl *agc; + struct v4l2_ctrl *gain; + }; + + v4l2_std_id std; + int input; + int output; + int enable; + int radio; + int width; + int height; + u32 ident; + u32 audclk_freq; + u32 crystal_freq; + bool ucgc; + u8 cgcdiv; + bool apll; + bool double_asclk; +}; + +static inline struct saa711x_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa711x_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ + +static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* Sanity routine to check if a register is present */ +static int saa711x_has_reg(const int id, const u8 reg) +{ + if (id == V4L2_IDENT_SAA7111) + return reg < 0x20 && reg != 0x01 && reg != 0x0f && + (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e; + if (id == V4L2_IDENT_SAA7111A) + return reg < 0x20 && reg != 0x01 && reg != 0x0f && + reg != 0x14 && reg != 0x18 && reg != 0x19 && + reg != 0x1d && reg != 0x1e; + + /* common for saa7113/4/5/8 */ + if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f || + reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) || + reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) || + reg == 0x82 || (reg >= 0x89 && reg <= 0x8e))) + return 0; + + switch (id) { + case V4L2_IDENT_SAA7113: + return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && + reg != 0x5d && reg < 0x63; + case V4L2_IDENT_SAA7114: + return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) && + (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 && + reg != 0x81 && reg < 0xf0; + case V4L2_IDENT_SAA7115: + return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe); + case V4L2_IDENT_SAA7118: + return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) && + (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 && + (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0; + } + return 1; +} + +static int saa711x_writeregs(struct v4l2_subdev *sd, const unsigned char *regs) +{ + struct saa711x_state *state = to_state(sd); + unsigned char reg, data; + + while (*regs != 0x00) { + reg = *(regs++); + data = *(regs++); + + /* According with datasheets, reserved regs should be + filled with 0 - seems better not to touch on they */ + if (saa711x_has_reg(state->ident, reg)) { + if (saa711x_write(sd, reg, data) < 0) + return -1; + } else { + v4l2_dbg(1, debug, sd, "tried to access reserved reg 0x%02x\n", reg); + } + } + return 0; +} + +static inline int saa711x_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +/* ----------------------------------------------------------------------- */ + +/* SAA7111 initialization table */ +static const unsigned char saa7111_init[] = { + R_01_INC_DELAY, 0x00, /* reserved */ + + /*front end */ + R_02_INPUT_CNTL_1, 0xd0, /* FUSE=3, GUDL=2, MODE=0 */ + R_03_INPUT_CNTL_2, 0x23, /* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, + * GAFIX=0, GAI1=256, GAI2=256 */ + R_04_INPUT_CNTL_3, 0x00, /* GAI1=256 */ + R_05_INPUT_CNTL_4, 0x00, /* GAI2=256 */ + + /* decoder */ + R_06_H_SYNC_START, 0xf3, /* HSB at 13(50Hz) / 17(60Hz) + * pixels after end of last line */ + R_07_H_SYNC_STOP, 0xe8, /* HSS seems to be needed to + * work with NTSC, too */ + R_08_SYNC_CNTL, 0xc8, /* AUFD=1, FSEL=1, EXFIL=0, + * VTRC=1, HPLL=0, VNOI=0 */ + R_09_LUMA_CNTL, 0x01, /* BYPS=0, PREF=0, BPSS=0, + * VBLB=0, UPTCV=0, APER=1 */ + R_0A_LUMA_BRIGHT_CNTL, 0x80, + R_0B_LUMA_CONTRAST_CNTL, 0x47, /* 0b - CONT=1.109 */ + R_0C_CHROMA_SAT_CNTL, 0x40, + R_0D_CHROMA_HUE_CNTL, 0x00, + R_0E_CHROMA_CNTL_1, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, + * FCTC=0, CHBW=1 */ + R_0F_CHROMA_GAIN_CNTL, 0x00, /* reserved */ + R_10_CHROMA_CNTL_2, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */ + R_11_MODE_DELAY_CNTL, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1, + * OEYC=1, OEHV=1, VIPB=0, COLO=0 */ + R_12_RT_SIGNAL_CNTL, 0x00, /* 12 - output control 2 */ + R_13_RT_X_PORT_OUT_CNTL, 0x00, /* 13 - output control 3 */ + R_14_ANAL_ADC_COMPAT_CNTL, 0x00, + R_15_VGATE_START_FID_CHG, 0x00, + R_16_VGATE_STOP, 0x00, + R_17_MISC_VGATE_CONF_AND_MSB, 0x00, + + 0x00, 0x00 +}; + +/* SAA7113 init codes */ +static const unsigned char saa7113_init[] = { + R_01_INC_DELAY, 0x08, + R_02_INPUT_CNTL_1, 0xc2, + R_03_INPUT_CNTL_2, 0x30, + R_04_INPUT_CNTL_3, 0x00, + R_05_INPUT_CNTL_4, 0x00, + R_06_H_SYNC_START, 0x89, + R_07_H_SYNC_STOP, 0x0d, + R_08_SYNC_CNTL, 0x88, + R_09_LUMA_CNTL, 0x01, + R_0A_LUMA_BRIGHT_CNTL, 0x80, + R_0B_LUMA_CONTRAST_CNTL, 0x47, + R_0C_CHROMA_SAT_CNTL, 0x40, + R_0D_CHROMA_HUE_CNTL, 0x00, + R_0E_CHROMA_CNTL_1, 0x01, + R_0F_CHROMA_GAIN_CNTL, 0x2a, + R_10_CHROMA_CNTL_2, 0x08, + R_11_MODE_DELAY_CNTL, 0x0c, + R_12_RT_SIGNAL_CNTL, 0x07, + R_13_RT_X_PORT_OUT_CNTL, 0x00, + R_14_ANAL_ADC_COMPAT_CNTL, 0x00, + R_15_VGATE_START_FID_CHG, 0x00, + R_16_VGATE_STOP, 0x00, + R_17_MISC_VGATE_CONF_AND_MSB, 0x00, + + 0x00, 0x00 +}; + +/* If a value differs from the Hauppauge driver values, then the comment starts with + 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the + Hauppauge driver sets. */ + +/* SAA7114 and SAA7115 initialization table */ +static const unsigned char saa7115_init_auto_input[] = { + /* Front-End Part */ + R_01_INC_DELAY, 0x48, /* white peak control disabled */ + R_03_INPUT_CNTL_2, 0x20, /* was 0x30. 0x20: long vertical blanking */ + R_04_INPUT_CNTL_3, 0x90, /* analog gain set to 0 */ + R_05_INPUT_CNTL_4, 0x90, /* analog gain set to 0 */ + /* Decoder Part */ + R_06_H_SYNC_START, 0xeb, /* horiz sync begin = -21 */ + R_07_H_SYNC_STOP, 0xe0, /* horiz sync stop = -17 */ + R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */ + R_0A_LUMA_BRIGHT_CNTL, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ + R_0B_LUMA_CONTRAST_CNTL, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */ + R_0C_CHROMA_SAT_CNTL, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */ + R_0D_CHROMA_HUE_CNTL, 0x00, + R_0F_CHROMA_GAIN_CNTL, 0x00, /* use automatic gain */ + R_10_CHROMA_CNTL_2, 0x06, /* chroma: active adaptive combfilter */ + R_11_MODE_DELAY_CNTL, 0x00, + R_12_RT_SIGNAL_CNTL, 0x9d, /* RTS0 output control: VGATE */ + R_13_RT_X_PORT_OUT_CNTL, 0x80, /* ITU656 standard mode, RTCO output enable RTCE */ + R_14_ANAL_ADC_COMPAT_CNTL, 0x00, + R_18_RAW_DATA_GAIN_CNTL, 0x40, /* gain 0x00 = nominal */ + R_19_RAW_DATA_OFF_CNTL, 0x80, + R_1A_COLOR_KILL_LVL_CNTL, 0x77, /* recommended value */ + R_1B_MISC_TVVCRDET, 0x42, /* recommended value */ + R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */ + R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */ + + + R_80_GLOBAL_CNTL_1, 0x0, /* No tasks enabled at init */ + + /* Power Device Control */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */ + 0x00, 0x00 +}; + +/* Used to reset saa7113, saa7114 and saa7115 */ +static const unsigned char saa7115_cfg_reset_scaler[] = { + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* disable I-port output */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* enable I-port output */ + 0x00, 0x00 +}; + +/* ============== SAA7715 VIDEO templates ============= */ + +static const unsigned char saa7115_cfg_60hz_video[] = { + R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + + R_15_VGATE_START_FID_CHG, 0x03, + R_16_VGATE_STOP, 0x11, + R_17_MISC_VGATE_CONF_AND_MSB, 0x9c, + + R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */ + R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */ + + R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */ + + /* Task A */ + R_90_A_TASK_HANDLING_CNTL, 0x80, + R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, + R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, + R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, + + /* hoffset low (input), 0x0002 is minimum */ + R_94_A_HORIZ_INPUT_WINDOW_START, 0x01, + R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, + + /* hsize low (input), 0x02d0 = 720 */ + R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, + R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, + + R_98_A_VERT_INPUT_WINDOW_START, 0x05, + R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, + + R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c, + R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, + + R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, + R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, + + R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c, + R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, + + /* Task B */ + R_C0_B_TASK_HANDLING_CNTL, 0x00, + R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, + R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, + R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, + + /* 0x0002 is minimum */ + R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02, + R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, + + /* 0x02d0 = 720 */ + R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, + R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, + + /* vwindow start 0x12 = 18 */ + R_C8_B_VERT_INPUT_WINDOW_START, 0x12, + R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, + + /* vwindow length 0xf8 = 248 */ + R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1, + R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9, + + /* hwindow 0x02d0 = 720 */ + R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, + R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, + + R_F0_LFCO_PER_LINE, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */ + R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0 */ + R_F5_PULSGEN_LINE_LENGTH, 0xad, + R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, + + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_50hz_video[] = { + R_80_GLOBAL_CNTL_1, 0x00, + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + + R_15_VGATE_START_FID_CHG, 0x37, /* VGATE start */ + R_16_VGATE_STOP, 0x16, + R_17_MISC_VGATE_CONF_AND_MSB, 0x99, + + R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */ + R_0E_CHROMA_CNTL_1, 0x07, + + R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */ + + /* Task A */ + R_90_A_TASK_HANDLING_CNTL, 0x81, + R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, + R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, + R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, + + /* This is weird: the datasheet says that you should use 2 as the minimum value, */ + /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ + /* hoffset low (input), 0x0002 is minimum */ + R_94_A_HORIZ_INPUT_WINDOW_START, 0x00, + R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, + + /* hsize low (input), 0x02d0 = 720 */ + R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, + R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, + + R_98_A_VERT_INPUT_WINDOW_START, 0x03, + R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, + + /* vsize 0x12 = 18 */ + R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12, + R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, + + /* hsize 0x05a0 = 1440 */ + R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, + R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, /* hsize hi (output) */ + R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12, /* vsize low (output), 0x12 = 18 */ + R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, /* vsize hi (output) */ + + /* Task B */ + R_C0_B_TASK_HANDLING_CNTL, 0x00, + R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, + R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, + R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, + + /* This is weird: the datasheet says that you should use 2 as the minimum value, */ + /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ + /* hoffset low (input), 0x0002 is minimum. See comment above. */ + R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00, + R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, + + /* hsize 0x02d0 = 720 */ + R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, + R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, + + /* voffset 0x16 = 22 */ + R_C8_B_VERT_INPUT_WINDOW_START, 0x16, + R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, + + /* vsize 0x0120 = 288 */ + R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20, + R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01, + + /* hsize 0x02d0 = 720 */ + R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, + R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, + + R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */ + R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */ + R_F5_PULSGEN_LINE_LENGTH, 0xb0, + R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, + + 0x00, 0x00 +}; + +/* ============== SAA7715 VIDEO templates (end) ======= */ + +static const unsigned char saa7115_cfg_vbi_on[] = { + R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + R_80_GLOBAL_CNTL_1, 0x30, /* Activate both tasks */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ + + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_vbi_off[] = { + R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ + + 0x00, 0x00 +}; + + +static const unsigned char saa7115_init_misc[] = { + R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01, + R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01, + R_84_I_PORT_SIGNAL_DEF, 0x20, + R_85_I_PORT_SIGNAL_POLAR, 0x21, + R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5, + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, + + /* Task A */ + R_A0_A_HORIZ_PRESCALING, 0x01, + R_A1_A_ACCUMULATION_LENGTH, 0x00, + R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, + + /* Configure controls at nominal value*/ + R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80, + R_A5_A_LUMA_CONTRAST_CNTL, 0x40, + R_A6_A_CHROMA_SATURATION_CNTL, 0x40, + + /* note: 2 x zoom ensures that VBI lines have same length as video lines. */ + R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00, + R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02, + + R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00, + + /* must be horiz lum scaling / 2 */ + R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00, + R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01, + + /* must be offset luma / 2 */ + R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00, + + R_B0_A_VERT_LUMA_SCALING_INC, 0x00, + R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04, + + R_B2_A_VERT_CHROMA_SCALING_INC, 0x00, + R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04, + + R_B4_A_VERT_SCALING_MODE_CNTL, 0x01, + + R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00, + R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00, + R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00, + R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00, + + R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00, + R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00, + R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00, + R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00, + + /* Task B */ + R_D0_B_HORIZ_PRESCALING, 0x01, + R_D1_B_ACCUMULATION_LENGTH, 0x00, + R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, + + /* Configure controls at nominal value*/ + R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80, + R_D5_B_LUMA_CONTRAST_CNTL, 0x40, + R_D6_B_CHROMA_SATURATION_CNTL, 0x40, + + /* hor lum scaling 0x0400 = 1 */ + R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00, + R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04, + + R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00, + + /* must be hor lum scaling / 2 */ + R_DC_B_HORIZ_CHROMA_SCALING, 0x00, + R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02, + + /* must be offset luma / 2 */ + R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00, + + R_E0_B_VERT_LUMA_SCALING_INC, 0x00, + R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04, + + R_E2_B_VERT_CHROMA_SCALING_INC, 0x00, + R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04, + + R_E4_B_VERT_SCALING_MODE_CNTL, 0x01, + + R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00, + R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00, + R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00, + R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00, + + R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00, + R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00, + R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00, + R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00, + + R_F2_NOMINAL_PLL2_DTO, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */ + R_F3_PLL_INCREMENT, 0x46, + R_F4_PLL2_STATUS, 0x00, + R_F7_PULSE_A_POS_MSB, 0x4b, /* not the recommended settings! */ + R_F8_PULSE_B_POS, 0x00, + R_F9_PULSE_B_POS_MSB, 0x4b, + R_FA_PULSE_C_POS, 0x00, + R_FB_PULSE_C_POS_MSB, 0x4b, + + /* PLL2 lock detection settings: 71 lines 50% phase error */ + R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88, + + /* Turn off VBI */ + R_40_SLICER_CNTL_1, 0x20, /* No framing code errors allowed. */ + R_41_LCR_BASE, 0xff, + R_41_LCR_BASE+1, 0xff, + R_41_LCR_BASE+2, 0xff, + R_41_LCR_BASE+3, 0xff, + R_41_LCR_BASE+4, 0xff, + R_41_LCR_BASE+5, 0xff, + R_41_LCR_BASE+6, 0xff, + R_41_LCR_BASE+7, 0xff, + R_41_LCR_BASE+8, 0xff, + R_41_LCR_BASE+9, 0xff, + R_41_LCR_BASE+10, 0xff, + R_41_LCR_BASE+11, 0xff, + R_41_LCR_BASE+12, 0xff, + R_41_LCR_BASE+13, 0xff, + R_41_LCR_BASE+14, 0xff, + R_41_LCR_BASE+15, 0xff, + R_41_LCR_BASE+16, 0xff, + R_41_LCR_BASE+17, 0xff, + R_41_LCR_BASE+18, 0xff, + R_41_LCR_BASE+19, 0xff, + R_41_LCR_BASE+20, 0xff, + R_41_LCR_BASE+21, 0xff, + R_41_LCR_BASE+22, 0xff, + R_58_PROGRAM_FRAMING_CODE, 0x40, + R_59_H_OFF_FOR_SLICER, 0x47, + R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83, + R_5D_DID, 0xbd, + R_5E_SDID, 0x35, + + R_02_INPUT_CNTL_1, 0xc4, /* input tuner -> input 4, amplifier active */ + + R_80_GLOBAL_CNTL_1, 0x20, /* enable task B */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, + 0x00, 0x00 +}; + +static int saa711x_odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static int saa711x_decode_vps(u8 *dst, u8 *p) +{ + static const u8 biphase_tbl[] = { + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, + 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, + 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, + 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, + 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, + 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, + 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + }; + int i; + u8 c, err = 0; + + for (i = 0; i < 2 * 13; i += 2) { + err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; + c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4); + dst[i / 2] = c; + } + return err & 0xf0; +} + +static int saa711x_decode_wss(u8 *p) +{ + static const int wss_bits[8] = { + 0, 0, 0, 1, 0, 1, 1, 1 + }; + unsigned char parity; + int wss = 0; + int i; + + for (i = 0; i < 16; i++) { + int b1 = wss_bits[p[i] & 7]; + int b2 = wss_bits[(p[i] >> 3) & 7]; + + if (b1 == b2) + return -1; + wss |= b2 << i; + } + parity = wss & 15; + parity ^= parity >> 2; + parity ^= parity >> 1; + + if (!(parity & 1)) + return -1; + + return wss; +} + +static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct saa711x_state *state = to_state(sd); + u32 acpf; + u32 acni; + u32 hz; + u64 f; + u8 acc = 0; /* reg 0x3a, audio clock control */ + + /* Checks for chips that don't have audio clock (saa7111, saa7113) */ + if (!saa711x_has_reg(state->ident, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD)) + return 0; + + v4l2_dbg(1, debug, sd, "set audio clock freq: %d\n", freq); + + /* sanity check */ + if (freq < 32000 || freq > 48000) + return -EINVAL; + + /* hz is the refresh rate times 100 */ + hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000; + /* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */ + acpf = (25600 * freq) / hz; + /* acni = (256 * freq * 2^23) / crystal_frequency = + (freq * 2^(8+23)) / crystal_frequency = + (freq << 31) / crystal_frequency */ + f = freq; + f = f << 31; + do_div(f, state->crystal_freq); + acni = f; + if (state->ucgc) { + acpf = acpf * state->cgcdiv / 16; + acni = acni * state->cgcdiv / 16; + acc = 0x80; + if (state->cgcdiv == 3) + acc |= 0x40; + } + if (state->apll) + acc |= 0x08; + + if (state->double_asclk) { + acpf <<= 1; + acni <<= 1; + } + saa711x_write(sd, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03); + saa711x_write(sd, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10 << state->double_asclk); + saa711x_write(sd, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc); + + saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff); + saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1, + (acpf >> 8) & 0xff); + saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2, + (acpf >> 16) & 0x03); + + saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff); + saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff); + saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f); + state->audclk_freq = freq; + return 0; +} + +static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct saa711x_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_CHROMA_AGC: + /* chroma gain cluster */ + if (state->agc->val) + state->gain->val = + saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f; + break; + } + return 0; +} + +static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct saa711x_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val); + break; + + case V4L2_CID_CONTRAST: + saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val); + break; + + case V4L2_CID_SATURATION: + saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val); + break; + + case V4L2_CID_HUE: + saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val); + break; + + case V4L2_CID_CHROMA_AGC: + /* chroma gain cluster */ + if (state->agc->val) + saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val); + else + saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int saa711x_set_size(struct v4l2_subdev *sd, int width, int height) +{ + struct saa711x_state *state = to_state(sd); + int HPSC, HFSC; + int VSCY; + int res; + int is_50hz = state->std & V4L2_STD_625_50; + int Vsrc = is_50hz ? 576 : 480; + + v4l2_dbg(1, debug, sd, "decoder set size to %ix%i\n", width, height); + + /* FIXME need better bounds checking here */ + if ((width < 1) || (width > 1440)) + return -EINVAL; + if ((height < 1) || (height > Vsrc)) + return -EINVAL; + + if (!saa711x_has_reg(state->ident, R_D0_B_HORIZ_PRESCALING)) { + /* Decoder only supports 720 columns and 480 or 576 lines */ + if (width != 720) + return -EINVAL; + if (height != Vsrc) + return -EINVAL; + } + + state->width = width; + state->height = height; + + if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH)) + return 0; + + /* probably have a valid size, let's set it */ + /* Set output width/height */ + /* width */ + + saa711x_write(sd, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, + (u8) (width & 0xff)); + saa711x_write(sd, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, + (u8) ((width >> 8) & 0xff)); + + /* Vertical Scaling uses height/2 */ + res = height / 2; + + /* On 60Hz, it is using a higher Vertical Output Size */ + if (!is_50hz) + res += (VRES_60HZ - 480) >> 1; + + /* height */ + saa711x_write(sd, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, + (u8) (res & 0xff)); + saa711x_write(sd, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, + (u8) ((res >> 8) & 0xff)); + + /* Scaling settings */ + /* Hprescaler is floor(inres/outres) */ + HPSC = (int)(720 / width); + /* 0 is not allowed (div. by zero) */ + HPSC = HPSC ? HPSC : 1; + HFSC = (int)((1024 * 720) / (HPSC * width)); + /* FIXME hardcodes to "Task B" + * write H prescaler integer */ + saa711x_write(sd, R_D0_B_HORIZ_PRESCALING, + (u8) (HPSC & 0x3f)); + + v4l2_dbg(1, debug, sd, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); + /* write H fine-scaling (luminance) */ + saa711x_write(sd, R_D8_B_HORIZ_LUMA_SCALING_INC, + (u8) (HFSC & 0xff)); + saa711x_write(sd, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, + (u8) ((HFSC >> 8) & 0xff)); + /* write H fine-scaling (chrominance) + * must be lum/2, so i'll just bitshift :) */ + saa711x_write(sd, R_DC_B_HORIZ_CHROMA_SCALING, + (u8) ((HFSC >> 1) & 0xff)); + saa711x_write(sd, R_DD_B_HORIZ_CHROMA_SCALING_MSB, + (u8) ((HFSC >> 9) & 0xff)); + + VSCY = (int)((1024 * Vsrc) / height); + v4l2_dbg(1, debug, sd, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); + + /* Correct Contrast and Luminance */ + saa711x_write(sd, R_D5_B_LUMA_CONTRAST_CNTL, + (u8) (64 * 1024 / VSCY)); + saa711x_write(sd, R_D6_B_CHROMA_SATURATION_CNTL, + (u8) (64 * 1024 / VSCY)); + + /* write V fine-scaling (luminance) */ + saa711x_write(sd, R_E0_B_VERT_LUMA_SCALING_INC, + (u8) (VSCY & 0xff)); + saa711x_write(sd, R_E1_B_VERT_LUMA_SCALING_INC_MSB, + (u8) ((VSCY >> 8) & 0xff)); + /* write V fine-scaling (chrominance) */ + saa711x_write(sd, R_E2_B_VERT_CHROMA_SCALING_INC, + (u8) (VSCY & 0xff)); + saa711x_write(sd, R_E3_B_VERT_CHROMA_SCALING_INC_MSB, + (u8) ((VSCY >> 8) & 0xff)); + + saa711x_writeregs(sd, saa7115_cfg_reset_scaler); + + /* Activates task "B" */ + saa711x_write(sd, R_80_GLOBAL_CNTL_1, + saa711x_read(sd, R_80_GLOBAL_CNTL_1) | 0x20); + + return 0; +} + +static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa711x_state *state = to_state(sd); + + /* Prevent unnecessary standard changes. During a standard + change the I-Port is temporarily disabled. Any devices + reading from that port can get confused. + Note that s_std is also used to switch from + radio to TV mode, so if a s_std is broadcast to + all I2C devices then you do not want to have an unwanted + side-effect here. */ + if (std == state->std) + return; + + state->std = std; + + // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. + if (std & V4L2_STD_525_60) { + v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n"); + saa711x_writeregs(sd, saa7115_cfg_60hz_video); + saa711x_set_size(sd, 720, 480); + } else { + v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n"); + saa711x_writeregs(sd, saa7115_cfg_50hz_video); + saa711x_set_size(sd, 720, 576); + } + + /* Register 0E - Bits D6-D4 on NO-AUTO mode + (SAA7111 and SAA7113 doesn't have auto mode) + 50 Hz / 625 lines 60 Hz / 525 lines + 000 PAL BGDHI (4.43Mhz) NTSC M (3.58MHz) + 001 NTSC 4.43 (50 Hz) PAL 4.43 (60 Hz) + 010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz) + 011 NTSC N (3.58MHz) PAL M (3.58MHz) + 100 reserved NTSC-Japan (3.58MHz) + */ + if (state->ident <= V4L2_IDENT_SAA7113) { + u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f; + + if (std == V4L2_STD_PAL_M) { + reg |= 0x30; + } else if (std == V4L2_STD_PAL_Nc) { + reg |= 0x20; + } else if (std == V4L2_STD_PAL_60) { + reg |= 0x10; + } else if (std == V4L2_STD_NTSC_M_JP) { + reg |= 0x40; + } else if (std & V4L2_STD_SECAM) { + reg |= 0x50; + } + saa711x_write(sd, R_0E_CHROMA_CNTL_1, reg); + } else { + /* restart task B if needed */ + int taskb = saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10; + + if (taskb && state->ident == V4L2_IDENT_SAA7114) { + saa711x_writeregs(sd, saa7115_cfg_vbi_on); + } + + /* switch audio mode too! */ + saa711x_s_clock_freq(sd, state->audclk_freq); + } +} + +/* setup the sliced VBI lcr registers according to the sliced VBI format */ +static void saa711x_set_lcr(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) +{ + struct saa711x_state *state = to_state(sd); + int is_50hz = (state->std & V4L2_STD_625_50); + u8 lcr[24]; + int i, x; + +#if 1 + /* saa7113/7114/7118 VBI support are experimental */ + if (!saa711x_has_reg(state->ident, R_41_LCR_BASE)) + return; + +#else + /* SAA7113 and SAA7118 also should support VBI - Need testing */ + if (state->ident != V4L2_IDENT_SAA7115) + return; +#endif + + for (i = 0; i <= 23; i++) + lcr[i] = 0xff; + + if (fmt == NULL) { + /* raw VBI */ + if (is_50hz) + for (i = 6; i <= 23; i++) + lcr[i] = 0xdd; + else + for (i = 10; i <= 21; i++) + lcr[i] = 0xdd; + } else { + /* sliced VBI */ + /* first clear lines that cannot be captured */ + if (is_50hz) { + for (i = 0; i <= 5; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + } + else { + for (i = 0; i <= 9; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + for (i = 22; i <= 23; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + } + + /* Now set the lcr values according to the specified service */ + for (i = 6; i <= 23; i++) { + lcr[i] = 0; + for (x = 0; x <= 1; x++) { + switch (fmt->service_lines[1-x][i]) { + case 0: + lcr[i] |= 0xf << (4 * x); + break; + case V4L2_SLICED_TELETEXT_B: + lcr[i] |= 1 << (4 * x); + break; + case V4L2_SLICED_CAPTION_525: + lcr[i] |= 4 << (4 * x); + break; + case V4L2_SLICED_WSS_625: + lcr[i] |= 5 << (4 * x); + break; + case V4L2_SLICED_VPS: + lcr[i] |= 7 << (4 * x); + break; + } + } + } + } + + /* write the lcr registers */ + for (i = 2; i <= 23; i++) { + saa711x_write(sd, i - 2 + R_41_LCR_BASE, lcr[i]); + } + + /* enable/disable raw VBI capturing */ + saa711x_writeregs(sd, fmt == NULL ? + saa7115_cfg_vbi_on : + saa7115_cfg_vbi_off); +} + +static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *sliced) +{ + static u16 lcr2vbi[] = { + 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_CAPTION_525, /* 4 */ + V4L2_SLICED_WSS_625, 0, /* 5 */ + V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */ + 0, 0, 0, 0 + }; + int i; + + memset(sliced->service_lines, 0, sizeof(sliced->service_lines)); + sliced->service_set = 0; + /* done if using raw VBI */ + if (saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10) + return 0; + for (i = 2; i <= 23; i++) { + u8 v = saa711x_read(sd, i - 2 + R_41_LCR_BASE); + + sliced->service_lines[0][i] = lcr2vbi[v >> 4]; + sliced->service_lines[1][i] = lcr2vbi[v & 0xf]; + sliced->service_set |= + sliced->service_lines[0][i] | sliced->service_lines[1][i]; + } + return 0; +} + +static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) +{ + saa711x_set_lcr(sd, NULL); + return 0; +} + +static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) +{ + saa711x_set_lcr(sd, fmt); + return 0; +} + +static int saa711x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + if (fmt->code != V4L2_MBUS_FMT_FIXED) + return -EINVAL; + fmt->field = V4L2_FIELD_INTERLACED; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + return saa711x_set_size(sd, fmt->width, fmt->height); +} + +/* Decode the sliced VBI data stream as created by the saa7115. + The format is described in the saa7115 datasheet in Tables 25 and 26 + and in Figure 33. + The current implementation uses SAV/EAV codes and not the ancillary data + headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV + code. */ +static int saa711x_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi) +{ + struct saa711x_state *state = to_state(sd); + static const char vbi_no_data_pattern[] = { + 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0 + }; + u8 *p = vbi->p; + u32 wss; + int id1, id2; /* the ID1 and ID2 bytes from the internal header */ + + vbi->type = 0; /* mark result as a failure */ + id1 = p[2]; + id2 = p[3]; + /* Note: the field bit is inverted for 60 Hz video */ + if (state->std & V4L2_STD_525_60) + id1 ^= 0x40; + + /* Skip internal header, p now points to the start of the payload */ + p += 4; + vbi->p = p; + + /* calculate field and line number of the VBI packet (1-23) */ + vbi->is_second_field = ((id1 & 0x40) != 0); + vbi->line = (id1 & 0x3f) << 3; + vbi->line |= (id2 & 0x70) >> 4; + + /* Obtain data type */ + id2 &= 0xf; + + /* If the VBI slicer does not detect any signal it will fill up + the payload buffer with 0xa0 bytes. */ + if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern))) + return 0; + + /* decode payloads */ + switch (id2) { + case 1: + vbi->type = V4L2_SLICED_TELETEXT_B; + break; + case 4: + if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1])) + return 0; + vbi->type = V4L2_SLICED_CAPTION_525; + break; + case 5: + wss = saa711x_decode_wss(p); + if (wss == -1) + return 0; + p[0] = wss & 0xff; + p[1] = wss >> 8; + vbi->type = V4L2_SLICED_WSS_625; + break; + case 7: + if (saa711x_decode_vps(p, p) != 0) + return 0; + vbi->type = V4L2_SLICED_VPS; + break; + default: + break; + } + return 0; +} + +/* ============ SAA7115 AUDIO settings (end) ============= */ + +static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa711x_state *state = to_state(sd); + int status; + + if (state->radio) + return 0; + status = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + + v4l2_dbg(1, debug, sd, "status: 0x%02x\n", status); + vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0; + return 0; +} + +static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa711x_state *state = to_state(sd); + + state->radio = 0; + saa711x_set_v4lstd(sd, std); + return 0; +} + +static int saa711x_s_radio(struct v4l2_subdev *sd) +{ + struct saa711x_state *state = to_state(sd); + + state->radio = 1; + return 0; +} + +static int saa711x_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa711x_state *state = to_state(sd); + u8 mask = (state->ident <= V4L2_IDENT_SAA7111A) ? 0xf8 : 0xf0; + + v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n", + input, output); + + /* saa7111/3 does not have these inputs */ + if (state->ident <= V4L2_IDENT_SAA7113 && + (input == SAA7115_COMPOSITE4 || + input == SAA7115_COMPOSITE5)) { + return -EINVAL; + } + if (input > SAA7115_SVIDEO3) + return -EINVAL; + if (state->input == input && state->output == output) + return 0; + v4l2_dbg(1, debug, sd, "now setting %s input %s output\n", + (input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", + (output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); + state->input = input; + + /* saa7111 has slightly different input numbering */ + if (state->ident <= V4L2_IDENT_SAA7111A) { + if (input >= SAA7115_COMPOSITE4) + input -= 2; + /* saa7111 specific */ + saa711x_write(sd, R_10_CHROMA_CNTL_2, + (saa711x_read(sd, R_10_CHROMA_CNTL_2) & 0x3f) | + ((output & 0xc0) ^ 0x40)); + saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, + (saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | + ((output & 2) ? 0x0a : 0)); + } + + /* select mode */ + saa711x_write(sd, R_02_INPUT_CNTL_1, + (saa711x_read(sd, R_02_INPUT_CNTL_1) & mask) | + input); + + /* bypass chrominance trap for S-Video modes */ + saa711x_write(sd, R_09_LUMA_CNTL, + (saa711x_read(sd, R_09_LUMA_CNTL) & 0x7f) | + (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0)); + + state->output = output; + if (state->ident == V4L2_IDENT_SAA7114 || + state->ident == V4L2_IDENT_SAA7115) { + saa711x_write(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK, + (saa711x_read(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) | + (state->output & 0x01)); + } + if (state->ident > V4L2_IDENT_SAA7111A) { + if (config & SAA7115_IDQ_IS_DEFAULT) + saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x20); + else + saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x21); + } + return 0; +} + +static int saa711x_s_gpio(struct v4l2_subdev *sd, u32 val) +{ + struct saa711x_state *state = to_state(sd); + + if (state->ident > V4L2_IDENT_SAA7111A) + return -EINVAL; + saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) | + (val ? 0x80 : 0)); + return 0; +} + +static int saa711x_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct saa711x_state *state = to_state(sd); + + v4l2_dbg(1, debug, sd, "%s output\n", + enable ? "enable" : "disable"); + + if (state->enable == enable) + return 0; + state->enable = enable; + if (!saa711x_has_reg(state->ident, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED)) + return 0; + saa711x_write(sd, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, state->enable); + return 0; +} + +static int saa711x_s_crystal_freq(struct v4l2_subdev *sd, u32 freq, u32 flags) +{ + struct saa711x_state *state = to_state(sd); + + if (freq != SAA7115_FREQ_32_11_MHZ && freq != SAA7115_FREQ_24_576_MHZ) + return -EINVAL; + state->crystal_freq = freq; + state->double_asclk = flags & SAA7115_FREQ_FL_DOUBLE_ASCLK; + state->cgcdiv = (flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4; + state->ucgc = flags & SAA7115_FREQ_FL_UCGC; + state->apll = flags & SAA7115_FREQ_FL_APLL; + saa711x_s_clock_freq(sd, state->audclk_freq); + return 0; +} + +static int saa711x_reset(struct v4l2_subdev *sd, u32 val) +{ + v4l2_dbg(1, debug, sd, "decoder RESET\n"); + saa711x_writeregs(sd, saa7115_cfg_reset_scaler); + return 0; +} + +static int saa711x_g_vbi_data(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *data) +{ + /* Note: the internal field ID is inverted for NTSC, + so data->field 0 maps to the saa7115 even field, + whereas for PAL it maps to the saa7115 odd field. */ + switch (data->id) { + case V4L2_SLICED_WSS_625: + if (saa711x_read(sd, 0x6b) & 0xc0) + return -EIO; + data->data[0] = saa711x_read(sd, 0x6c); + data->data[1] = saa711x_read(sd, 0x6d); + return 0; + case V4L2_SLICED_CAPTION_525: + if (data->field == 0) { + /* CC */ + if (saa711x_read(sd, 0x66) & 0x30) + return -EIO; + data->data[0] = saa711x_read(sd, 0x69); + data->data[1] = saa711x_read(sd, 0x6a); + return 0; + } + /* XDS */ + if (saa711x_read(sd, 0x66) & 0xc0) + return -EIO; + data->data[0] = saa711x_read(sd, 0x67); + data->data[1] = saa711x_read(sd, 0x68); + return 0; + default: + return -EINVAL; + } +} + +static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct saa711x_state *state = to_state(sd); + int reg1f, reg1e; + + /* + * The V4L2 core already initializes std with all supported + * Standards. All driver needs to do is to mask it, to remove + * standards that don't apply from the mask + */ + + reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + + if (state->ident == V4L2_IDENT_SAA7115) { + reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); + + v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e); + + switch (reg1e & 0x03) { + case 1: + *std &= V4L2_STD_NTSC; + break; + case 2: + /* + * V4L2_STD_PAL just cover the european PAL standards. + * This is wrong, as the device could also be using an + * other PAL standard. + */ + *std &= V4L2_STD_PAL | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | + V4L2_STD_PAL_M | V4L2_STD_PAL_60; + break; + case 3: + *std &= V4L2_STD_SECAM; + break; + default: + /* Can't detect anything */ + break; + } + } + + v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f); + + /* horizontal/vertical not locked */ + if (reg1f & 0x40) + goto ret; + + if (reg1f & 0x20) + *std &= V4L2_STD_525_60; + else + *std &= V4L2_STD_625_50; + +ret: + v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std); + + return 0; +} + +static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct saa711x_state *state = to_state(sd); + int reg1e = 0x80; + int reg1f; + + *status = V4L2_IN_ST_NO_SIGNAL; + if (state->ident == V4L2_IDENT_SAA7115) + reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); + reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + if ((reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80) + *status = 0; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = saa711x_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int saa711x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa711x_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int saa711x_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct saa711x_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->ident, 0); +} + +static int saa711x_log_status(struct v4l2_subdev *sd) +{ + struct saa711x_state *state = to_state(sd); + int reg1e, reg1f; + int signalOk; + int vcr; + + v4l2_info(sd, "Audio frequency: %d Hz\n", state->audclk_freq); + if (state->ident != V4L2_IDENT_SAA7115) { + /* status for the saa7114 */ + reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + signalOk = (reg1f & 0xc1) == 0x81; + v4l2_info(sd, "Video signal: %s\n", signalOk ? "ok" : "bad"); + v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); + return 0; + } + + /* status for the saa7115 */ + reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); + reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + + signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80; + vcr = !(reg1f & 0x10); + + if (state->input >= 6) + v4l2_info(sd, "Input: S-Video %d\n", state->input - 6); + else + v4l2_info(sd, "Input: Composite %d\n", state->input); + v4l2_info(sd, "Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad"); + v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); + + switch (reg1e & 0x03) { + case 1: + v4l2_info(sd, "Detected format: NTSC\n"); + break; + case 2: + v4l2_info(sd, "Detected format: PAL\n"); + break; + case 3: + v4l2_info(sd, "Detected format: SECAM\n"); + break; + default: + v4l2_info(sd, "Detected format: BW/No color\n"); + break; + } + v4l2_info(sd, "Width, Height: %d, %d\n", state->width, state->height); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops saa711x_ctrl_ops = { + .s_ctrl = saa711x_s_ctrl, + .g_volatile_ctrl = saa711x_g_volatile_ctrl, +}; + +static const struct v4l2_subdev_core_ops saa711x_core_ops = { + .log_status = saa711x_log_status, + .g_chip_ident = saa711x_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = saa711x_s_std, + .reset = saa711x_reset, + .s_gpio = saa711x_s_gpio, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = saa711x_g_register, + .s_register = saa711x_s_register, +#endif +}; + +static const struct v4l2_subdev_tuner_ops saa711x_tuner_ops = { + .s_radio = saa711x_s_radio, + .g_tuner = saa711x_g_tuner, +}; + +static const struct v4l2_subdev_audio_ops saa711x_audio_ops = { + .s_clock_freq = saa711x_s_clock_freq, +}; + +static const struct v4l2_subdev_video_ops saa711x_video_ops = { + .s_routing = saa711x_s_routing, + .s_crystal_freq = saa711x_s_crystal_freq, + .s_mbus_fmt = saa711x_s_mbus_fmt, + .s_stream = saa711x_s_stream, + .querystd = saa711x_querystd, + .g_input_status = saa711x_g_input_status, +}; + +static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops = { + .g_vbi_data = saa711x_g_vbi_data, + .decode_vbi_line = saa711x_decode_vbi_line, + .g_sliced_fmt = saa711x_g_sliced_fmt, + .s_sliced_fmt = saa711x_s_sliced_fmt, + .s_raw_fmt = saa711x_s_raw_fmt, +}; + +static const struct v4l2_subdev_ops saa711x_ops = { + .core = &saa711x_core_ops, + .tuner = &saa711x_tuner_ops, + .audio = &saa711x_audio_ops, + .video = &saa711x_video_ops, + .vbi = &saa711x_vbi_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int saa711x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa711x_state *state; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + int i; + char name[17]; + char chip_id; + int autodetect = !id || id->driver_data == 1; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + for (i = 0; i < 0x0f; i++) { + i2c_smbus_write_byte_data(client, 0, i); + name[i] = (i2c_smbus_read_byte_data(client, 0) & 0x0f) + '0'; + if (name[i] > '9') + name[i] += 'a' - '9' - 1; + } + name[i] = '\0'; + + chip_id = name[5]; + + /* Check whether this chip is part of the saa711x series */ + if (memcmp(name + 1, "f711", 4)) { + v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n", + client->addr << 1, name); + return -ENODEV; + } + + /* Safety check */ + if (!autodetect && id->name[6] != chip_id) { + v4l_warn(client, "found saa711%c while %s was expected\n", + chip_id, id->name); + } + snprintf(client->name, sizeof(client->name), "saa711%c", chip_id); + v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name, + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &saa711x_ops); + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 6); + /* add in ascending ID order */ + v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_CHROMA_AGC, 0, 1, 1, 1); + state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(state); + return err; + } + v4l2_ctrl_auto_cluster(2, &state->agc, 0, true); + + state->input = -1; + state->output = SAA7115_IPORT_ON; + state->enable = 1; + state->radio = 0; + switch (chip_id) { + case '1': + state->ident = V4L2_IDENT_SAA7111; + if (saa711x_read(sd, R_00_CHIP_VERSION) & 0xf0) { + v4l_info(client, "saa7111a variant found\n"); + state->ident = V4L2_IDENT_SAA7111A; + } + break; + case '3': + state->ident = V4L2_IDENT_SAA7113; + break; + case '4': + state->ident = V4L2_IDENT_SAA7114; + break; + case '5': + state->ident = V4L2_IDENT_SAA7115; + break; + case '8': + state->ident = V4L2_IDENT_SAA7118; + break; + default: + state->ident = V4L2_IDENT_SAA7111; + v4l2_info(sd, "WARNING: Chip is not known - Falling back to saa7111\n"); + break; + } + + state->audclk_freq = 48000; + + v4l2_dbg(1, debug, sd, "writing init values\n"); + + /* init to 60hz/48khz */ + state->crystal_freq = SAA7115_FREQ_24_576_MHZ; + switch (state->ident) { + case V4L2_IDENT_SAA7111: + case V4L2_IDENT_SAA7111A: + saa711x_writeregs(sd, saa7111_init); + break; + case V4L2_IDENT_SAA7113: + saa711x_writeregs(sd, saa7113_init); + break; + default: + state->crystal_freq = SAA7115_FREQ_32_11_MHZ; + saa711x_writeregs(sd, saa7115_init_auto_input); + } + if (state->ident > V4L2_IDENT_SAA7111A) + saa711x_writeregs(sd, saa7115_init_misc); + saa711x_set_v4lstd(sd, V4L2_STD_NTSC); + v4l2_ctrl_handler_setup(hdl); + + v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n", + saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC), + saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa711x_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id saa711x_id[] = { + { "saa7115_auto", 1 }, /* autodetect */ + { "saa7111", 0 }, + { "saa7113", 0 }, + { "saa7114", 0 }, + { "saa7115", 0 }, + { "saa7118", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa711x_id); + +static struct i2c_driver saa711x_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7115", + }, + .probe = saa711x_probe, + .remove = saa711x_remove, + .id_table = saa711x_id, +}; + +module_i2c_driver(saa711x_driver); diff --git a/drivers/media/i2c/saa711x_regs.h b/drivers/media/i2c/saa711x_regs.h new file mode 100644 index 00000000..4e5f2eb0 --- /dev/null +++ b/drivers/media/i2c/saa711x_regs.h @@ -0,0 +1,549 @@ +/* saa711x - Philips SAA711x video decoder register specifications + * + * Copyright (c) 2006 Mauro Carvalho Chehab + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define R_00_CHIP_VERSION 0x00 +/* Video Decoder */ + /* Video Decoder - Frontend part */ +#define R_01_INC_DELAY 0x01 +#define R_02_INPUT_CNTL_1 0x02 +#define R_03_INPUT_CNTL_2 0x03 +#define R_04_INPUT_CNTL_3 0x04 +#define R_05_INPUT_CNTL_4 0x05 + /* Video Decoder - Decoder part */ +#define R_06_H_SYNC_START 0x06 +#define R_07_H_SYNC_STOP 0x07 +#define R_08_SYNC_CNTL 0x08 +#define R_09_LUMA_CNTL 0x09 +#define R_0A_LUMA_BRIGHT_CNTL 0x0a +#define R_0B_LUMA_CONTRAST_CNTL 0x0b +#define R_0C_CHROMA_SAT_CNTL 0x0c +#define R_0D_CHROMA_HUE_CNTL 0x0d +#define R_0E_CHROMA_CNTL_1 0x0e +#define R_0F_CHROMA_GAIN_CNTL 0x0f +#define R_10_CHROMA_CNTL_2 0x10 +#define R_11_MODE_DELAY_CNTL 0x11 +#define R_12_RT_SIGNAL_CNTL 0x12 +#define R_13_RT_X_PORT_OUT_CNTL 0x13 +#define R_14_ANAL_ADC_COMPAT_CNTL 0x14 +#define R_15_VGATE_START_FID_CHG 0x15 +#define R_16_VGATE_STOP 0x16 +#define R_17_MISC_VGATE_CONF_AND_MSB 0x17 +#define R_18_RAW_DATA_GAIN_CNTL 0x18 +#define R_19_RAW_DATA_OFF_CNTL 0x19 +#define R_1A_COLOR_KILL_LVL_CNTL 0x1a +#define R_1B_MISC_TVVCRDET 0x1b +#define R_1C_ENHAN_COMB_CTRL1 0x1c +#define R_1D_ENHAN_COMB_CTRL2 0x1d +#define R_1E_STATUS_BYTE_1_VD_DEC 0x1e +#define R_1F_STATUS_BYTE_2_VD_DEC 0x1f + +/* Component processing and interrupt masking part */ +#define R_23_INPUT_CNTL_5 0x23 +#define R_24_INPUT_CNTL_6 0x24 +#define R_25_INPUT_CNTL_7 0x25 +#define R_29_COMP_DELAY 0x29 +#define R_2A_COMP_BRIGHT_CNTL 0x2a +#define R_2B_COMP_CONTRAST_CNTL 0x2b +#define R_2C_COMP_SAT_CNTL 0x2c +#define R_2D_INTERRUPT_MASK_1 0x2d +#define R_2E_INTERRUPT_MASK_2 0x2e +#define R_2F_INTERRUPT_MASK_3 0x2f + +/* Audio clock generator part */ +#define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD 0x30 +#define R_34_AUD_MAST_CLK_NOMINAL_INC 0x34 +#define R_38_CLK_RATIO_AMXCLK_TO_ASCLK 0x38 +#define R_39_CLK_RATIO_ASCLK_TO_ALRCLK 0x39 +#define R_3A_AUD_CLK_GEN_BASIC_SETUP 0x3a + +/* General purpose VBI data slicer part */ +#define R_40_SLICER_CNTL_1 0x40 +#define R_41_LCR_BASE 0x41 +#define R_58_PROGRAM_FRAMING_CODE 0x58 +#define R_59_H_OFF_FOR_SLICER 0x59 +#define R_5A_V_OFF_FOR_SLICER 0x5a +#define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF 0x5b +#define R_5D_DID 0x5d +#define R_5E_SDID 0x5e +#define R_60_SLICER_STATUS_BYTE_0 0x60 +#define R_61_SLICER_STATUS_BYTE_1 0x61 +#define R_62_SLICER_STATUS_BYTE_2 0x62 + +/* X port, I port and the scaler part */ + /* Task independent global settings */ +#define R_80_GLOBAL_CNTL_1 0x80 +#define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F 0x81 +#define R_83_X_PORT_I_O_ENA_AND_OUT_CLK 0x83 +#define R_84_I_PORT_SIGNAL_DEF 0x84 +#define R_85_I_PORT_SIGNAL_POLAR 0x85 +#define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT 0x86 +#define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED 0x87 +#define R_88_POWER_SAVE_ADC_PORT_CNTL 0x88 +#define R_8F_STATUS_INFO_SCALER 0x8f + /* Task A definition */ + /* Basic settings and acquisition window definition */ +#define R_90_A_TASK_HANDLING_CNTL 0x90 +#define R_91_A_X_PORT_FORMATS_AND_CONF 0x91 +#define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL 0x92 +#define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF 0x93 +#define R_94_A_HORIZ_INPUT_WINDOW_START 0x94 +#define R_95_A_HORIZ_INPUT_WINDOW_START_MSB 0x95 +#define R_96_A_HORIZ_INPUT_WINDOW_LENGTH 0x96 +#define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB 0x97 +#define R_98_A_VERT_INPUT_WINDOW_START 0x98 +#define R_99_A_VERT_INPUT_WINDOW_START_MSB 0x99 +#define R_9A_A_VERT_INPUT_WINDOW_LENGTH 0x9a +#define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB 0x9b +#define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH 0x9c +#define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0x9d +#define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH 0x9e +#define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB 0x9f + /* FIR filtering and prescaling */ +#define R_A0_A_HORIZ_PRESCALING 0xa0 +#define R_A1_A_ACCUMULATION_LENGTH 0xa1 +#define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xa2 +#define R_A4_A_LUMA_BRIGHTNESS_CNTL 0xa4 +#define R_A5_A_LUMA_CONTRAST_CNTL 0xa5 +#define R_A6_A_CHROMA_SATURATION_CNTL 0xa6 + /* Horizontal phase scaling */ +#define R_A8_A_HORIZ_LUMA_SCALING_INC 0xa8 +#define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB 0xa9 +#define R_AA_A_HORIZ_LUMA_PHASE_OFF 0xaa +#define R_AC_A_HORIZ_CHROMA_SCALING_INC 0xac +#define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB 0xad +#define R_AE_A_HORIZ_CHROMA_PHASE_OFF 0xae +#define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB 0xaf + /* Vertical scaling */ +#define R_B0_A_VERT_LUMA_SCALING_INC 0xb0 +#define R_B1_A_VERT_LUMA_SCALING_INC_MSB 0xb1 +#define R_B2_A_VERT_CHROMA_SCALING_INC 0xb2 +#define R_B3_A_VERT_CHROMA_SCALING_INC_MSB 0xb3 +#define R_B4_A_VERT_SCALING_MODE_CNTL 0xb4 +#define R_B8_A_VERT_CHROMA_PHASE_OFF_00 0xb8 +#define R_B9_A_VERT_CHROMA_PHASE_OFF_01 0xb9 +#define R_BA_A_VERT_CHROMA_PHASE_OFF_10 0xba +#define R_BB_A_VERT_CHROMA_PHASE_OFF_11 0xbb +#define R_BC_A_VERT_LUMA_PHASE_OFF_00 0xbc +#define R_BD_A_VERT_LUMA_PHASE_OFF_01 0xbd +#define R_BE_A_VERT_LUMA_PHASE_OFF_10 0xbe +#define R_BF_A_VERT_LUMA_PHASE_OFF_11 0xbf + /* Task B definition */ + /* Basic settings and acquisition window definition */ +#define R_C0_B_TASK_HANDLING_CNTL 0xc0 +#define R_C1_B_X_PORT_FORMATS_AND_CONF 0xc1 +#define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION 0xc2 +#define R_C3_B_I_PORT_FORMATS_AND_CONF 0xc3 +#define R_C4_B_HORIZ_INPUT_WINDOW_START 0xc4 +#define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB 0xc5 +#define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH 0xc6 +#define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB 0xc7 +#define R_C8_B_VERT_INPUT_WINDOW_START 0xc8 +#define R_C9_B_VERT_INPUT_WINDOW_START_MSB 0xc9 +#define R_CA_B_VERT_INPUT_WINDOW_LENGTH 0xca +#define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB 0xcb +#define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH 0xcc +#define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0xcd +#define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH 0xce +#define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB 0xcf + /* FIR filtering and prescaling */ +#define R_D0_B_HORIZ_PRESCALING 0xd0 +#define R_D1_B_ACCUMULATION_LENGTH 0xd1 +#define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xd2 +#define R_D4_B_LUMA_BRIGHTNESS_CNTL 0xd4 +#define R_D5_B_LUMA_CONTRAST_CNTL 0xd5 +#define R_D6_B_CHROMA_SATURATION_CNTL 0xd6 + /* Horizontal phase scaling */ +#define R_D8_B_HORIZ_LUMA_SCALING_INC 0xd8 +#define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB 0xd9 +#define R_DA_B_HORIZ_LUMA_PHASE_OFF 0xda +#define R_DC_B_HORIZ_CHROMA_SCALING 0xdc +#define R_DD_B_HORIZ_CHROMA_SCALING_MSB 0xdd +#define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA 0xde + /* Vertical scaling */ +#define R_E0_B_VERT_LUMA_SCALING_INC 0xe0 +#define R_E1_B_VERT_LUMA_SCALING_INC_MSB 0xe1 +#define R_E2_B_VERT_CHROMA_SCALING_INC 0xe2 +#define R_E3_B_VERT_CHROMA_SCALING_INC_MSB 0xe3 +#define R_E4_B_VERT_SCALING_MODE_CNTL 0xe4 +#define R_E8_B_VERT_CHROMA_PHASE_OFF_00 0xe8 +#define R_E9_B_VERT_CHROMA_PHASE_OFF_01 0xe9 +#define R_EA_B_VERT_CHROMA_PHASE_OFF_10 0xea +#define R_EB_B_VERT_CHROMA_PHASE_OFF_11 0xeb +#define R_EC_B_VERT_LUMA_PHASE_OFF_00 0xec +#define R_ED_B_VERT_LUMA_PHASE_OFF_01 0xed +#define R_EE_B_VERT_LUMA_PHASE_OFF_10 0xee +#define R_EF_B_VERT_LUMA_PHASE_OFF_11 0xef + +/* second PLL (PLL2) and Pulsegenerator Programming */ +#define R_F0_LFCO_PER_LINE 0xf0 +#define R_F1_P_I_PARAM_SELECT 0xf1 +#define R_F2_NOMINAL_PLL2_DTO 0xf2 +#define R_F3_PLL_INCREMENT 0xf3 +#define R_F4_PLL2_STATUS 0xf4 +#define R_F5_PULSGEN_LINE_LENGTH 0xf5 +#define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG 0xf6 +#define R_F7_PULSE_A_POS_MSB 0xf7 +#define R_F8_PULSE_B_POS 0xf8 +#define R_F9_PULSE_B_POS_MSB 0xf9 +#define R_FA_PULSE_C_POS 0xfa +#define R_FB_PULSE_C_POS_MSB 0xfb +#define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff + +#if 0 +/* Those structs will be used in the future for debug purposes */ +struct saa711x_reg_descr { + u8 reg; + int count; + char *name; +}; + +struct saa711x_reg_descr saa711x_regs[] = { + /* REG COUNT NAME */ + {R_00_CHIP_VERSION,1, + "Chip version"}, + + /* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */ + + /* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */ + {R_01_INC_DELAY,1, + "Increment delay"}, + {R_02_INPUT_CNTL_1,1, + "Analog input control 1"}, + {R_03_INPUT_CNTL_2,1, + "Analog input control 2"}, + {R_04_INPUT_CNTL_3,1, + "Analog input control 3"}, + {R_05_INPUT_CNTL_4,1, + "Analog input control 4"}, + + /* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */ + {R_06_H_SYNC_START,1, + "Horizontal sync start"}, + {R_07_H_SYNC_STOP,1, + "Horizontal sync stop"}, + {R_08_SYNC_CNTL,1, + "Sync control"}, + {R_09_LUMA_CNTL,1, + "Luminance control"}, + {R_0A_LUMA_BRIGHT_CNTL,1, + "Luminance brightness control"}, + {R_0B_LUMA_CONTRAST_CNTL,1, + "Luminance contrast control"}, + {R_0C_CHROMA_SAT_CNTL,1, + "Chrominance saturation control"}, + {R_0D_CHROMA_HUE_CNTL,1, + "Chrominance hue control"}, + {R_0E_CHROMA_CNTL_1,1, + "Chrominance control 1"}, + {R_0F_CHROMA_GAIN_CNTL,1, + "Chrominance gain control"}, + {R_10_CHROMA_CNTL_2,1, + "Chrominance control 2"}, + {R_11_MODE_DELAY_CNTL,1, + "Mode/delay control"}, + {R_12_RT_SIGNAL_CNTL,1, + "RT signal control"}, + {R_13_RT_X_PORT_OUT_CNTL,1, + "RT/X port output control"}, + {R_14_ANAL_ADC_COMPAT_CNTL,1, + "Analog/ADC/compatibility control"}, + {R_15_VGATE_START_FID_CHG, 1, + "VGATE start FID change"}, + {R_16_VGATE_STOP,1, + "VGATE stop"}, + {R_17_MISC_VGATE_CONF_AND_MSB, 1, + "Miscellaneous VGATE configuration and MSBs"}, + {R_18_RAW_DATA_GAIN_CNTL,1, + "Raw data gain control",}, + {R_19_RAW_DATA_OFF_CNTL,1, + "Raw data offset control",}, + {R_1A_COLOR_KILL_LVL_CNTL,1, + "Color Killer Level Control"}, + { R_1B_MISC_TVVCRDET, 1, + "MISC /TVVCRDET"}, + { R_1C_ENHAN_COMB_CTRL1, 1, + "Enhanced comb ctrl1"}, + { R_1D_ENHAN_COMB_CTRL2, 1, + "Enhanced comb ctrl1"}, + {R_1E_STATUS_BYTE_1_VD_DEC,1, + "Status byte 1 video decoder"}, + {R_1F_STATUS_BYTE_2_VD_DEC,1, + "Status byte 2 video decoder"}, + + /* Component processing and interrupt masking part: 0x20h to R_2F_INTERRUPT_MASK_3 */ + /* 0x20 to 0x22 - Reserved */ + {R_23_INPUT_CNTL_5,1, + "Analog input control 5"}, + {R_24_INPUT_CNTL_6,1, + "Analog input control 6"}, + {R_25_INPUT_CNTL_7,1, + "Analog input control 7"}, + /* 0x26 to 0x28 - Reserved */ + {R_29_COMP_DELAY,1, + "Component delay"}, + {R_2A_COMP_BRIGHT_CNTL,1, + "Component brightness control"}, + {R_2B_COMP_CONTRAST_CNTL,1, + "Component contrast control"}, + {R_2C_COMP_SAT_CNTL,1, + "Component saturation control"}, + {R_2D_INTERRUPT_MASK_1,1, + "Interrupt mask 1"}, + {R_2E_INTERRUPT_MASK_2,1, + "Interrupt mask 2"}, + {R_2F_INTERRUPT_MASK_3,1, + "Interrupt mask 3"}, + + /* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */ + {R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3, + "Audio master clock cycles per field"}, + /* 0x33 - Reserved */ + {R_34_AUD_MAST_CLK_NOMINAL_INC,3, + "Audio master clock nominal increment"}, + /* 0x37 - Reserved */ + {R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1, + "Clock ratio AMXCLK to ASCLK"}, + {R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1, + "Clock ratio ASCLK to ALRCLK"}, + {R_3A_AUD_CLK_GEN_BASIC_SETUP,1, + "Audio clock generator basic setup"}, + /* 0x3b-0x3f - Reserved */ + + /* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */ + {R_40_SLICER_CNTL_1,1, + "Slicer control 1"}, + {R_41_LCR,23, + "R_41_LCR"}, + {R_58_PROGRAM_FRAMING_CODE,1, + "Programmable framing code"}, + {R_59_H_OFF_FOR_SLICER,1, + "Horizontal offset for slicer"}, + {R_5A_V_OFF_FOR_SLICER,1, + "Vertical offset for slicer"}, + {R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1, + "Field offset and MSBs for horizontal and vertical offset"}, + {R_5D_DID,1, + "Header and data identification (R_5D_DID)"}, + {R_5E_SDID,1, + "Sliced data identification (R_5E_SDID) code"}, + {R_60_SLICER_STATUS_BYTE_0,1, + "Slicer status byte 0"}, + {R_61_SLICER_STATUS_BYTE_1,1, + "Slicer status byte 1"}, + {R_62_SLICER_STATUS_BYTE_2,1, + "Slicer status byte 2"}, + /* 0x63-0x7f - Reserved */ + + /* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */ + /* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */ + {R_80_GLOBAL_CNTL_1,1, + "Global control 1"}, + {R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1, + "Vertical sync and Field ID source selection, retimed V and F signals"}, + /* 0x82 - Reserved */ + {R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1, + "X port I/O enable and output clock"}, + {R_84_I_PORT_SIGNAL_DEF,1, + "I port signal definitions"}, + {R_85_I_PORT_SIGNAL_POLAR,1, + "I port signal polarities"}, + {R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1, + "I port FIFO flag control and arbitration"}, + {R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 1, + "I port I/O enable output clock and gated"}, + {R_88_POWER_SAVE_ADC_PORT_CNTL,1, + "Power save/ADC port control"}, + /* 089-0x8e - Reserved */ + {R_8F_STATUS_INFO_SCALER,1, + "Status information scaler part"}, + + /* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */ + /* Task A: Basic settings and acquisition window definition */ + {R_90_A_TASK_HANDLING_CNTL,1, + "Task A: Task handling control"}, + {R_91_A_X_PORT_FORMATS_AND_CONF,1, + "Task A: X port formats and configuration"}, + {R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1, + "Task A: X port input reference signal definition"}, + {R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1, + "Task A: I port output formats and configuration"}, + {R_94_A_HORIZ_INPUT_WINDOW_START,2, + "Task A: Horizontal input window start"}, + {R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2, + "Task A: Horizontal input window length"}, + {R_98_A_VERT_INPUT_WINDOW_START,2, + "Task A: Vertical input window start"}, + {R_9A_A_VERT_INPUT_WINDOW_LENGTH,2, + "Task A: Vertical input window length"}, + {R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2, + "Task A: Horizontal output window length"}, + {R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2, + "Task A: Vertical output window length"}, + + /* Task A: FIR filtering and prescaling */ + {R_A0_A_HORIZ_PRESCALING,1, + "Task A: Horizontal prescaling"}, + {R_A1_A_ACCUMULATION_LENGTH,1, + "Task A: Accumulation length"}, + {R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1, + "Task A: Prescaler DC gain and FIR prefilter"}, + /* 0xa3 - Reserved */ + {R_A4_A_LUMA_BRIGHTNESS_CNTL,1, + "Task A: Luminance brightness control"}, + {R_A5_A_LUMA_CONTRAST_CNTL,1, + "Task A: Luminance contrast control"}, + {R_A6_A_CHROMA_SATURATION_CNTL,1, + "Task A: Chrominance saturation control"}, + /* 0xa7 - Reserved */ + + /* Task A: Horizontal phase scaling */ + {R_A8_A_HORIZ_LUMA_SCALING_INC,2, + "Task A: Horizontal luminance scaling increment"}, + {R_AA_A_HORIZ_LUMA_PHASE_OFF,1, + "Task A: Horizontal luminance phase offset"}, + /* 0xab - Reserved */ + {R_AC_A_HORIZ_CHROMA_SCALING_INC,2, + "Task A: Horizontal chrominance scaling increment"}, + {R_AE_A_HORIZ_CHROMA_PHASE_OFF,1, + "Task A: Horizontal chrominance phase offset"}, + /* 0xaf - Reserved */ + + /* Task A: Vertical scaling */ + {R_B0_A_VERT_LUMA_SCALING_INC,2, + "Task A: Vertical luminance scaling increment"}, + {R_B2_A_VERT_CHROMA_SCALING_INC,2, + "Task A: Vertical chrominance scaling increment"}, + {R_B4_A_VERT_SCALING_MODE_CNTL,1, + "Task A: Vertical scaling mode control"}, + /* 0xb5-0xb7 - Reserved */ + {R_B8_A_VERT_CHROMA_PHASE_OFF_00,1, + "Task A: Vertical chrominance phase offset '00'"}, + {R_B9_A_VERT_CHROMA_PHASE_OFF_01,1, + "Task A: Vertical chrominance phase offset '01'"}, + {R_BA_A_VERT_CHROMA_PHASE_OFF_10,1, + "Task A: Vertical chrominance phase offset '10'"}, + {R_BB_A_VERT_CHROMA_PHASE_OFF_11,1, + "Task A: Vertical chrominance phase offset '11'"}, + {R_BC_A_VERT_LUMA_PHASE_OFF_00,1, + "Task A: Vertical luminance phase offset '00'"}, + {R_BD_A_VERT_LUMA_PHASE_OFF_01,1, + "Task A: Vertical luminance phase offset '01'"}, + {R_BE_A_VERT_LUMA_PHASE_OFF_10,1, + "Task A: Vertical luminance phase offset '10'"}, + {R_BF_A_VERT_LUMA_PHASE_OFF_11,1, + "Task A: Vertical luminance phase offset '11'"}, + + /* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */ + /* Task B: Basic settings and acquisition window definition */ + {R_C0_B_TASK_HANDLING_CNTL,1, + "Task B: Task handling control"}, + {R_C1_B_X_PORT_FORMATS_AND_CONF,1, + "Task B: X port formats and configuration"}, + {R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1, + "Task B: Input reference signal definition"}, + {R_C3_B_I_PORT_FORMATS_AND_CONF,1, + "Task B: I port formats and configuration"}, + {R_C4_B_HORIZ_INPUT_WINDOW_START,2, + "Task B: Horizontal input window start"}, + {R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2, + "Task B: Horizontal input window length"}, + {R_C8_B_VERT_INPUT_WINDOW_START,2, + "Task B: Vertical input window start"}, + {R_CA_B_VERT_INPUT_WINDOW_LENGTH,2, + "Task B: Vertical input window length"}, + {R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2, + "Task B: Horizontal output window length"}, + {R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2, + "Task B: Vertical output window length"}, + + /* Task B: FIR filtering and prescaling */ + {R_D0_B_HORIZ_PRESCALING,1, + "Task B: Horizontal prescaling"}, + {R_D1_B_ACCUMULATION_LENGTH,1, + "Task B: Accumulation length"}, + {R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1, + "Task B: Prescaler DC gain and FIR prefilter"}, + /* 0xd3 - Reserved */ + {R_D4_B_LUMA_BRIGHTNESS_CNTL,1, + "Task B: Luminance brightness control"}, + {R_D5_B_LUMA_CONTRAST_CNTL,1, + "Task B: Luminance contrast control"}, + {R_D6_B_CHROMA_SATURATION_CNTL,1, + "Task B: Chrominance saturation control"}, + /* 0xd7 - Reserved */ + + /* Task B: Horizontal phase scaling */ + {R_D8_B_HORIZ_LUMA_SCALING_INC,2, + "Task B: Horizontal luminance scaling increment"}, + {R_DA_B_HORIZ_LUMA_PHASE_OFF,1, + "Task B: Horizontal luminance phase offset"}, + /* 0xdb - Reserved */ + {R_DC_B_HORIZ_CHROMA_SCALING,2, + "Task B: Horizontal chrominance scaling"}, + {R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1, + "Task B: Horizontal Phase Offset Chroma"}, + /* 0xdf - Reserved */ + + /* Task B: Vertical scaling */ + {R_E0_B_VERT_LUMA_SCALING_INC,2, + "Task B: Vertical luminance scaling increment"}, + {R_E2_B_VERT_CHROMA_SCALING_INC,2, + "Task B: Vertical chrominance scaling increment"}, + {R_E4_B_VERT_SCALING_MODE_CNTL,1, + "Task B: Vertical scaling mode control"}, + /* 0xe5-0xe7 - Reserved */ + {R_E8_B_VERT_CHROMA_PHASE_OFF_00,1, + "Task B: Vertical chrominance phase offset '00'"}, + {R_E9_B_VERT_CHROMA_PHASE_OFF_01,1, + "Task B: Vertical chrominance phase offset '01'"}, + {R_EA_B_VERT_CHROMA_PHASE_OFF_10,1, + "Task B: Vertical chrominance phase offset '10'"}, + {R_EB_B_VERT_CHROMA_PHASE_OFF_11,1, + "Task B: Vertical chrominance phase offset '11'"}, + {R_EC_B_VERT_LUMA_PHASE_OFF_00,1, + "Task B: Vertical luminance phase offset '00'"}, + {R_ED_B_VERT_LUMA_PHASE_OFF_01,1, + "Task B: Vertical luminance phase offset '01'"}, + {R_EE_B_VERT_LUMA_PHASE_OFF_10,1, + "Task B: Vertical luminance phase offset '10'"}, + {R_EF_B_VERT_LUMA_PHASE_OFF_11,1, + "Task B: Vertical luminance phase offset '11'"}, + + /* second PLL (PLL2) and Pulsegenerator Programming */ + { R_F0_LFCO_PER_LINE, 1, + "LFCO's per line"}, + { R_F1_P_I_PARAM_SELECT,1, + "P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"}, + { R_F2_NOMINAL_PLL2_DTO,1, + "Nominal PLL2 DTO"}, + {R_F3_PLL_INCREMENT,1, + "PLL2 Increment"}, + {R_F4_PLL2_STATUS,1, + "PLL2 Status"}, + {R_F5_PULSGEN_LINE_LENGTH,1, + "Pulsgen. line length"}, + {R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1, + "Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"}, + {R_F7_PULSE_A_POS_MSB,1, + "Pulse A Position"}, + {R_F8_PULSE_B_POS,2, + "Pulse B Position"}, + {R_FA_PULSE_C_POS,2, + "Pulse C Position"}, + /* 0xfc to 0xfe - Reserved */ + {R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1, + "S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"}, +}; +#endif diff --git a/drivers/media/i2c/saa7127.c b/drivers/media/i2c/saa7127.c new file mode 100644 index 00000000..8a47ac10 --- /dev/null +++ b/drivers/media/i2c/saa7127.c @@ -0,0 +1,852 @@ +/* + * saa7127 - Philips SAA7127/SAA7129 video encoder driver + * + * Copyright (C) 2003 Roy Bulter + * + * Based on SAA7126 video encoder driver by Gillem & Andreas Oberritter + * + * Copyright (C) 2000-2001 Gillem + * Copyright (C) 2002 Andreas Oberritter + * + * Based on Stadis 4:2:2 MPEG-2 Decoder Driver by Nathan Laredo + * + * Copyright (C) 1999 Nathan Laredo + * + * This driver is designed for the Hauppauge 250/350 Linux driver + * from the ivtv Project + * + * Copyright (C) 2003 Kevin Thayer + * + * Dual output support: + * Copyright (C) 2004 Eric Varsanyi + * + * NTSC Tuning and 7.5 IRE Setup + * Copyright (C) 2004 Chris Kennedy + * + * VBI additions & cleanup: + * Copyright (C) 2004, 2005 Hans Verkuil + * + * Note: the saa7126 is identical to the saa7127, and the saa7128 is + * identical to the saa7129, except that the saa7126 and saa7128 have + * macrovision anti-taping support. This driver will almost certainly + * work fine for those chips, except of course for the missing anti-taping + * support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +static int test_image; + +MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver"); +MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); +MODULE_LICENSE("GPL"); +module_param(debug, int, 0644); +module_param(test_image, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); +MODULE_PARM_DESC(test_image, "test_image (0-1)"); + + +/* + * SAA7127 registers + */ + +#define SAA7127_REG_STATUS 0x00 +#define SAA7127_REG_WIDESCREEN_CONFIG 0x26 +#define SAA7127_REG_WIDESCREEN_ENABLE 0x27 +#define SAA7127_REG_BURST_START 0x28 +#define SAA7127_REG_BURST_END 0x29 +#define SAA7127_REG_COPYGEN_0 0x2a +#define SAA7127_REG_COPYGEN_1 0x2b +#define SAA7127_REG_COPYGEN_2 0x2c +#define SAA7127_REG_OUTPUT_PORT_CONTROL 0x2d +#define SAA7127_REG_GAIN_LUMINANCE_RGB 0x38 +#define SAA7127_REG_GAIN_COLORDIFF_RGB 0x39 +#define SAA7127_REG_INPUT_PORT_CONTROL_1 0x3a +#define SAA7129_REG_FADE_KEY_COL2 0x4f +#define SAA7127_REG_CHROMA_PHASE 0x5a +#define SAA7127_REG_GAINU 0x5b +#define SAA7127_REG_GAINV 0x5c +#define SAA7127_REG_BLACK_LEVEL 0x5d +#define SAA7127_REG_BLANKING_LEVEL 0x5e +#define SAA7127_REG_VBI_BLANKING 0x5f +#define SAA7127_REG_DAC_CONTROL 0x61 +#define SAA7127_REG_BURST_AMP 0x62 +#define SAA7127_REG_SUBC3 0x63 +#define SAA7127_REG_SUBC2 0x64 +#define SAA7127_REG_SUBC1 0x65 +#define SAA7127_REG_SUBC0 0x66 +#define SAA7127_REG_LINE_21_ODD_0 0x67 +#define SAA7127_REG_LINE_21_ODD_1 0x68 +#define SAA7127_REG_LINE_21_EVEN_0 0x69 +#define SAA7127_REG_LINE_21_EVEN_1 0x6a +#define SAA7127_REG_RCV_PORT_CONTROL 0x6b +#define SAA7127_REG_VTRIG 0x6c +#define SAA7127_REG_HTRIG_HI 0x6d +#define SAA7127_REG_MULTI 0x6e +#define SAA7127_REG_CLOSED_CAPTION 0x6f +#define SAA7127_REG_RCV2_OUTPUT_START 0x70 +#define SAA7127_REG_RCV2_OUTPUT_END 0x71 +#define SAA7127_REG_RCV2_OUTPUT_MSBS 0x72 +#define SAA7127_REG_TTX_REQUEST_H_START 0x73 +#define SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH 0x74 +#define SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT 0x75 +#define SAA7127_REG_TTX_ODD_REQ_VERT_START 0x76 +#define SAA7127_REG_TTX_ODD_REQ_VERT_END 0x77 +#define SAA7127_REG_TTX_EVEN_REQ_VERT_START 0x78 +#define SAA7127_REG_TTX_EVEN_REQ_VERT_END 0x79 +#define SAA7127_REG_FIRST_ACTIVE 0x7a +#define SAA7127_REG_LAST_ACTIVE 0x7b +#define SAA7127_REG_MSB_VERTICAL 0x7c +#define SAA7127_REG_DISABLE_TTX_LINE_LO_0 0x7e +#define SAA7127_REG_DISABLE_TTX_LINE_LO_1 0x7f + +/* + ********************************************************************** + * + * Arrays with configuration parameters for the SAA7127 + * + ********************************************************************** + */ + +struct i2c_reg_value { + unsigned char reg; + unsigned char value; +}; + +static const struct i2c_reg_value saa7129_init_config_extra[] = { + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x38 }, + { SAA7127_REG_VTRIG, 0xfa }, + { 0, 0 } +}; + +static const struct i2c_reg_value saa7127_init_config_common[] = { + { SAA7127_REG_WIDESCREEN_CONFIG, 0x0d }, + { SAA7127_REG_WIDESCREEN_ENABLE, 0x00 }, + { SAA7127_REG_COPYGEN_0, 0x77 }, + { SAA7127_REG_COPYGEN_1, 0x41 }, + { SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */ + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0xbf }, + { SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 }, + { SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 }, + { SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */ + { SAA7127_REG_LINE_21_ODD_0, 0x77 }, + { SAA7127_REG_LINE_21_ODD_1, 0x41 }, + { SAA7127_REG_LINE_21_EVEN_0, 0x88 }, + { SAA7127_REG_LINE_21_EVEN_1, 0x41 }, + { SAA7127_REG_RCV_PORT_CONTROL, 0x12 }, + { SAA7127_REG_VTRIG, 0xf9 }, + { SAA7127_REG_HTRIG_HI, 0x00 }, + { SAA7127_REG_RCV2_OUTPUT_START, 0x41 }, + { SAA7127_REG_RCV2_OUTPUT_END, 0xc3 }, + { SAA7127_REG_RCV2_OUTPUT_MSBS, 0x00 }, + { SAA7127_REG_TTX_REQUEST_H_START, 0x3e }, + { SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH, 0xb8 }, + { SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT, 0x03 }, + { SAA7127_REG_TTX_ODD_REQ_VERT_START, 0x15 }, + { SAA7127_REG_TTX_ODD_REQ_VERT_END, 0x16 }, + { SAA7127_REG_TTX_EVEN_REQ_VERT_START, 0x15 }, + { SAA7127_REG_TTX_EVEN_REQ_VERT_END, 0x16 }, + { SAA7127_REG_FIRST_ACTIVE, 0x1a }, + { SAA7127_REG_LAST_ACTIVE, 0x01 }, + { SAA7127_REG_MSB_VERTICAL, 0xc0 }, + { SAA7127_REG_DISABLE_TTX_LINE_LO_0, 0x00 }, + { SAA7127_REG_DISABLE_TTX_LINE_LO_1, 0x00 }, + { 0, 0 } +}; + +#define SAA7127_60HZ_DAC_CONTROL 0x15 +static const struct i2c_reg_value saa7127_init_config_60hz[] = { + { SAA7127_REG_BURST_START, 0x19 }, + /* BURST_END is also used as a chip ID in saa7127_probe */ + { SAA7127_REG_BURST_END, 0x1d }, + { SAA7127_REG_CHROMA_PHASE, 0xa3 }, + { SAA7127_REG_GAINU, 0x98 }, + { SAA7127_REG_GAINV, 0xd3 }, + { SAA7127_REG_BLACK_LEVEL, 0x39 }, + { SAA7127_REG_BLANKING_LEVEL, 0x2e }, + { SAA7127_REG_VBI_BLANKING, 0x2e }, + { SAA7127_REG_DAC_CONTROL, 0x15 }, + { SAA7127_REG_BURST_AMP, 0x4d }, + { SAA7127_REG_SUBC3, 0x1f }, + { SAA7127_REG_SUBC2, 0x7c }, + { SAA7127_REG_SUBC1, 0xf0 }, + { SAA7127_REG_SUBC0, 0x21 }, + { SAA7127_REG_MULTI, 0x90 }, + { SAA7127_REG_CLOSED_CAPTION, 0x11 }, + { 0, 0 } +}; + +#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02 +static struct i2c_reg_value saa7127_init_config_50hz_pal[] = { + { SAA7127_REG_BURST_START, 0x21 }, + /* BURST_END is also used as a chip ID in saa7127_probe */ + { SAA7127_REG_BURST_END, 0x1d }, + { SAA7127_REG_CHROMA_PHASE, 0x3f }, + { SAA7127_REG_GAINU, 0x7d }, + { SAA7127_REG_GAINV, 0xaf }, + { SAA7127_REG_BLACK_LEVEL, 0x33 }, + { SAA7127_REG_BLANKING_LEVEL, 0x35 }, + { SAA7127_REG_VBI_BLANKING, 0x35 }, + { SAA7127_REG_DAC_CONTROL, 0x02 }, + { SAA7127_REG_BURST_AMP, 0x2f }, + { SAA7127_REG_SUBC3, 0xcb }, + { SAA7127_REG_SUBC2, 0x8a }, + { SAA7127_REG_SUBC1, 0x09 }, + { SAA7127_REG_SUBC0, 0x2a }, + { SAA7127_REG_MULTI, 0xa0 }, + { SAA7127_REG_CLOSED_CAPTION, 0x00 }, + { 0, 0 } +}; + +#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08 +static struct i2c_reg_value saa7127_init_config_50hz_secam[] = { + { SAA7127_REG_BURST_START, 0x21 }, + /* BURST_END is also used as a chip ID in saa7127_probe */ + { SAA7127_REG_BURST_END, 0x1d }, + { SAA7127_REG_CHROMA_PHASE, 0x3f }, + { SAA7127_REG_GAINU, 0x6a }, + { SAA7127_REG_GAINV, 0x81 }, + { SAA7127_REG_BLACK_LEVEL, 0x33 }, + { SAA7127_REG_BLANKING_LEVEL, 0x35 }, + { SAA7127_REG_VBI_BLANKING, 0x35 }, + { SAA7127_REG_DAC_CONTROL, 0x08 }, + { SAA7127_REG_BURST_AMP, 0x2f }, + { SAA7127_REG_SUBC3, 0xb2 }, + { SAA7127_REG_SUBC2, 0x3b }, + { SAA7127_REG_SUBC1, 0xa3 }, + { SAA7127_REG_SUBC0, 0x28 }, + { SAA7127_REG_MULTI, 0x90 }, + { SAA7127_REG_CLOSED_CAPTION, 0x00 }, + { 0, 0 } +}; + +/* + ********************************************************************** + * + * Encoder Struct, holds the configuration state of the encoder + * + ********************************************************************** + */ + +struct saa7127_state { + struct v4l2_subdev sd; + v4l2_std_id std; + u32 ident; + enum saa7127_input_type input_type; + enum saa7127_output_type output_type; + int video_enable; + int wss_enable; + u16 wss_mode; + int cc_enable; + u16 cc_data; + int xds_enable; + u16 xds_data; + int vps_enable; + u8 vps_data[5]; + u8 reg_2d; + u8 reg_3a; + u8 reg_3a_cb; /* colorbar bit */ + u8 reg_61; +}; + +static inline struct saa7127_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa7127_state, sd); +} + +static const char * const output_strs[] = +{ + "S-Video + Composite", + "Composite", + "S-Video", + "RGB", + "YUV C", + "YUV V" +}; + +static const char * const wss_strs[] = { + "invalid", + "letterbox 14:9 center", + "letterbox 14:9 top", + "invalid", + "letterbox 16:9 top", + "invalid", + "invalid", + "16:9 full format anamorphic", + "4:3 full format", + "invalid", + "invalid", + "letterbox 16:9 center", + "invalid", + "letterbox >16:9 center", + "14:9 full format center", + "invalid", +}; + +/* ----------------------------------------------------------------------- */ + +static int saa7127_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + + for (i = 0; i < 3; i++) { + if (i2c_smbus_write_byte_data(client, reg, val) == 0) + return 0; + } + v4l2_err(sd, "I2C Write Problem\n"); + return -1; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_write_inittab(struct v4l2_subdev *sd, + const struct i2c_reg_value *regs) +{ + while (regs->reg != 0) { + saa7127_write(sd, regs->reg, regs->value); + regs++; + } + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_vps(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = to_state(sd); + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 16)) + return -EINVAL; + if (state->vps_enable != enable) { + v4l2_dbg(1, debug, sd, "Turn VPS Signal %s\n", enable ? "on" : "off"); + saa7127_write(sd, 0x54, enable << 7); + state->vps_enable = enable; + } + if (!enable) + return 0; + + state->vps_data[0] = data->data[2]; + state->vps_data[1] = data->data[8]; + state->vps_data[2] = data->data[9]; + state->vps_data[3] = data->data[10]; + state->vps_data[4] = data->data[11]; + v4l2_dbg(1, debug, sd, "Set VPS data %*ph\n", 5, state->vps_data); + saa7127_write(sd, 0x55, state->vps_data[0]); + saa7127_write(sd, 0x56, state->vps_data[1]); + saa7127_write(sd, 0x57, state->vps_data[2]); + saa7127_write(sd, 0x58, state->vps_data[3]); + saa7127_write(sd, 0x59, state->vps_data[4]); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_cc(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = to_state(sd); + u16 cc = data->data[1] << 8 | data->data[0]; + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 21)) + return -EINVAL; + if (state->cc_enable != enable) { + v4l2_dbg(1, debug, sd, + "Turn CC %s\n", enable ? "on" : "off"); + saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION, + (state->xds_enable << 7) | (enable << 6) | 0x11); + state->cc_enable = enable; + } + if (!enable) + return 0; + + v4l2_dbg(2, debug, sd, "CC data: %04x\n", cc); + saa7127_write(sd, SAA7127_REG_LINE_21_ODD_0, cc & 0xff); + saa7127_write(sd, SAA7127_REG_LINE_21_ODD_1, cc >> 8); + state->cc_data = cc; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_xds(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = to_state(sd); + u16 xds = data->data[1] << 8 | data->data[0]; + int enable = (data->line != 0); + + if (enable && (data->field != 1 || data->line != 21)) + return -EINVAL; + if (state->xds_enable != enable) { + v4l2_dbg(1, debug, sd, "Turn XDS %s\n", enable ? "on" : "off"); + saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION, + (enable << 7) | (state->cc_enable << 6) | 0x11); + state->xds_enable = enable; + } + if (!enable) + return 0; + + v4l2_dbg(2, debug, sd, "XDS data: %04x\n", xds); + saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff); + saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_1, xds >> 8); + state->xds_data = xds; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_wss(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = to_state(sd); + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 23)) + return -EINVAL; + if (state->wss_enable != enable) { + v4l2_dbg(1, debug, sd, "Turn WSS %s\n", enable ? "on" : "off"); + saa7127_write(sd, 0x27, enable << 7); + state->wss_enable = enable; + } + if (!enable) + return 0; + + saa7127_write(sd, 0x26, data->data[0]); + saa7127_write(sd, 0x27, 0x80 | (data->data[1] & 0x3f)); + v4l2_dbg(1, debug, sd, + "WSS mode: %s\n", wss_strs[data->data[0] & 0xf]); + state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0]; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_video_enable(struct v4l2_subdev *sd, int enable) +{ + struct saa7127_state *state = to_state(sd); + + if (enable) { + v4l2_dbg(1, debug, sd, "Enable Video Output\n"); + saa7127_write(sd, 0x2d, state->reg_2d); + saa7127_write(sd, 0x61, state->reg_61); + } else { + v4l2_dbg(1, debug, sd, "Disable Video Output\n"); + saa7127_write(sd, 0x2d, (state->reg_2d & 0xf0)); + saa7127_write(sd, 0x61, (state->reg_61 | 0xc0)); + } + state->video_enable = enable; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa7127_state *state = to_state(sd); + const struct i2c_reg_value *inittab; + + if (std & V4L2_STD_525_60) { + v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n"); + inittab = saa7127_init_config_60hz; + state->reg_61 = SAA7127_60HZ_DAC_CONTROL; + + } else if (state->ident == V4L2_IDENT_SAA7129 && + (std & V4L2_STD_SECAM) && + !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) { + + /* If and only if SECAM, with a SAA712[89] */ + v4l2_dbg(1, debug, sd, + "Selecting 50 Hz SECAM video Standard\n"); + inittab = saa7127_init_config_50hz_secam; + state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL; + + } else { + v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n"); + inittab = saa7127_init_config_50hz_pal; + state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL; + } + + /* Write Table */ + saa7127_write_inittab(sd, inittab); + state->std = std; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) +{ + struct saa7127_state *state = to_state(sd); + + switch (output) { + case SAA7127_OUTPUT_TYPE_RGB: + state->reg_2d = 0x0f; /* RGB + CVBS (for sync) */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_COMPOSITE: + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x20; /* CVBS only */ + else + state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_SVIDEO: + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x18; /* Y + C */ + else + state->reg_2d = 0xff; /*11111111 croma -> R, luma -> CVBS + G + B */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_YUV_V: + state->reg_2d = 0x4f; /* reg 2D = 01001111, all DAC's on, RGB + VBS */ + state->reg_3a = 0x0b; /* reg 3A = 00001011, bypass RGB-matrix */ + break; + + case SAA7127_OUTPUT_TYPE_YUV_C: + state->reg_2d = 0x0f; /* reg 2D = 00001111, all DAC's on, RGB + CVBS */ + state->reg_3a = 0x0b; /* reg 3A = 00001011, bypass RGB-matrix */ + break; + + case SAA7127_OUTPUT_TYPE_BOTH: + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x38; + else + state->reg_2d = 0xbf; + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + default: + return -EINVAL; + } + v4l2_dbg(1, debug, sd, + "Selecting %s output type\n", output_strs[output]); + + /* Configure Encoder */ + saa7127_write(sd, 0x2d, state->reg_2d); + saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb); + state->output_type = output; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_input_type(struct v4l2_subdev *sd, int input) +{ + struct saa7127_state *state = to_state(sd); + + switch (input) { + case SAA7127_INPUT_TYPE_NORMAL: /* avia */ + v4l2_dbg(1, debug, sd, "Selecting Normal Encoder Input\n"); + state->reg_3a_cb = 0; + break; + + case SAA7127_INPUT_TYPE_TEST_IMAGE: /* color bar */ + v4l2_dbg(1, debug, sd, "Selecting Color Bar generator\n"); + state->reg_3a_cb = 0x80; + break; + + default: + return -EINVAL; + } + saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb); + state->input_type = input; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa7127_state *state = to_state(sd); + + if (state->std == std) + return 0; + return saa7127_set_std(sd, std); +} + +static int saa7127_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa7127_state *state = to_state(sd); + int rc = 0; + + if (state->input_type != input) + rc = saa7127_set_input_type(sd, input); + if (rc == 0 && state->output_type != output) + rc = saa7127_set_output_type(sd, output); + return rc; +} + +static int saa7127_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct saa7127_state *state = to_state(sd); + + if (state->video_enable == enable) + return 0; + return saa7127_set_video_enable(sd, enable); +} + +static int saa7127_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) +{ + struct saa7127_state *state = to_state(sd); + + memset(fmt->service_lines, 0, sizeof(fmt->service_lines)); + if (state->vps_enable) + fmt->service_lines[0][16] = V4L2_SLICED_VPS; + if (state->wss_enable) + fmt->service_lines[0][23] = V4L2_SLICED_WSS_625; + if (state->cc_enable) { + fmt->service_lines[0][21] = V4L2_SLICED_CAPTION_525; + fmt->service_lines[1][21] = V4L2_SLICED_CAPTION_525; + } + fmt->service_set = + (state->vps_enable ? V4L2_SLICED_VPS : 0) | + (state->wss_enable ? V4L2_SLICED_WSS_625 : 0) | + (state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0); + return 0; +} + +static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + switch (data->id) { + case V4L2_SLICED_WSS_625: + return saa7127_set_wss(sd, data); + case V4L2_SLICED_VPS: + return saa7127_set_vps(sd, data); + case V4L2_SLICED_CAPTION_525: + if (data->field == 0) + return saa7127_set_cc(sd, data); + return saa7127_set_xds(sd, data); + default: + return -EINVAL; + } + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int saa7127_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = saa7127_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int saa7127_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa7127_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int saa7127_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct saa7127_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->ident, 0); +} + +static int saa7127_log_status(struct v4l2_subdev *sd) +{ + struct saa7127_state *state = to_state(sd); + + v4l2_info(sd, "Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz"); + v4l2_info(sd, "Input: %s\n", state->input_type ? "color bars" : "normal"); + v4l2_info(sd, "Output: %s\n", state->video_enable ? + output_strs[state->output_type] : "disabled"); + v4l2_info(sd, "WSS: %s\n", state->wss_enable ? + wss_strs[state->wss_mode] : "disabled"); + v4l2_info(sd, "VPS: %s\n", state->vps_enable ? "enabled" : "disabled"); + v4l2_info(sd, "CC: %s\n", state->cc_enable ? "enabled" : "disabled"); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa7127_core_ops = { + .log_status = saa7127_log_status, + .g_chip_ident = saa7127_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = saa7127_g_register, + .s_register = saa7127_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops saa7127_video_ops = { + .s_std_output = saa7127_s_std_output, + .s_routing = saa7127_s_routing, + .s_stream = saa7127_s_stream, +}; + +static const struct v4l2_subdev_vbi_ops saa7127_vbi_ops = { + .s_vbi_data = saa7127_s_vbi_data, + .g_sliced_fmt = saa7127_g_sliced_fmt, +}; + +static const struct v4l2_subdev_ops saa7127_ops = { + .core = &saa7127_core_ops, + .video = &saa7127_video_ops, + .vbi = &saa7127_vbi_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int saa7127_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa7127_state *state; + struct v4l2_subdev *sd; + struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 }; /* set to disabled */ + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n", + client->addr << 1); + + state = kzalloc(sizeof(struct saa7127_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &saa7127_ops); + + /* First test register 0: Bits 5-7 are a version ID (should be 0), + and bit 2 should also be 0. + This is rather general, so the second test is more specific and + looks at the 'ending point of burst in clock cycles' which is + 0x1d after a reset and not expected to ever change. */ + if ((saa7127_read(sd, 0) & 0xe4) != 0 || + (saa7127_read(sd, 0x29) & 0x3f) != 0x1d) { + v4l2_dbg(1, debug, sd, "saa7127 not found\n"); + kfree(state); + return -ENODEV; + } + + if (id->driver_data) { /* Chip type is already known */ + state->ident = id->driver_data; + } else { /* Needs detection */ + int read_result; + + /* Detect if it's an saa7129 */ + read_result = saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2); + saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, 0xaa); + if (saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2) == 0xaa) { + saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, + read_result); + state->ident = V4L2_IDENT_SAA7129; + strlcpy(client->name, "saa7129", I2C_NAME_SIZE); + } else { + state->ident = V4L2_IDENT_SAA7127; + strlcpy(client->name, "saa7127", I2C_NAME_SIZE); + } + } + + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + + v4l2_dbg(1, debug, sd, "Configuring encoder\n"); + saa7127_write_inittab(sd, saa7127_init_config_common); + saa7127_set_std(sd, V4L2_STD_NTSC); + saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); + saa7127_set_vps(sd, &vbi); + saa7127_set_wss(sd, &vbi); + saa7127_set_cc(sd, &vbi); + saa7127_set_xds(sd, &vbi); + if (test_image == 1) + /* The Encoder has an internal Colorbar generator */ + /* This can be used for debugging */ + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); + else + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); + saa7127_set_video_enable(sd, 1); + + if (state->ident == V4L2_IDENT_SAA7129) + saa7127_write_inittab(sd, saa7129_init_config_extra); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + /* Turn off TV output */ + saa7127_set_video_enable(sd, 0); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_device_id saa7127_id[] = { + { "saa7127_auto", 0 }, /* auto-detection */ + { "saa7126", V4L2_IDENT_SAA7127 }, + { "saa7127", V4L2_IDENT_SAA7127 }, + { "saa7128", V4L2_IDENT_SAA7129 }, + { "saa7129", V4L2_IDENT_SAA7129 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7127_id); + +static struct i2c_driver saa7127_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7127", + }, + .probe = saa7127_probe, + .remove = saa7127_remove, + .id_table = saa7127_id, +}; + +module_i2c_driver(saa7127_driver); diff --git a/drivers/media/i2c/saa717x.c b/drivers/media/i2c/saa717x.c new file mode 100644 index 00000000..cf3a0aa7 --- /dev/null +++ b/drivers/media/i2c/saa717x.c @@ -0,0 +1,1378 @@ +/* + * saa717x - Philips SAA717xHL video decoder driver + * + * Based on the saa7115 driver + * + * Changes by Ohta Kyuma + * - Apply to SAA717x,NEC uPD64031,uPD64083. (1/31/2004) + * + * Changes by T.Adachi (tadachi@tadachi-net.com) + * - support audio, video scaler etc, and checked the initialize sequence. + * + * Cleaned up by Hans Verkuil + * + * Note: this is a reversed engineered driver based on captures from + * the I2C bus under Windows. This chip is very similar to the saa7134, + * though. Unfortunately, this driver is currently only working for NTSC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +MODULE_DESCRIPTION("Philips SAA717x audio/video decoder driver"); +MODULE_AUTHOR("K. Ohta, T. Adachi, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +struct saa717x_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + v4l2_std_id std; + int input; + int enable; + int radio; + int playback; + int audio; + int tuner_audio_mode; + int audio_main_mute; + int audio_main_vol_r; + int audio_main_vol_l; + u16 audio_main_bass; + u16 audio_main_treble; + u16 audio_main_volume; + u16 audio_main_balance; + int audio_input; +}; + +static inline struct saa717x_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa717x_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct saa717x_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ + +/* for audio mode */ +#define TUNER_AUDIO_MONO 0 /* LL */ +#define TUNER_AUDIO_STEREO 1 /* LR */ +#define TUNER_AUDIO_LANG1 2 /* LL */ +#define TUNER_AUDIO_LANG2 3 /* RR */ + +#define SAA717X_NTSC_WIDTH (704) +#define SAA717X_NTSC_HEIGHT (480) + +/* ----------------------------------------------------------------------- */ + +static int saa717x_write(struct v4l2_subdev *sd, u32 reg, u32 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_adapter *adap = client->adapter; + int fw_addr = reg == 0x454 || (reg >= 0x464 && reg <= 0x478) || reg == 0x480 || reg == 0x488; + unsigned char mm1[6]; + struct i2c_msg msg; + + msg.flags = 0; + msg.addr = client->addr; + mm1[0] = (reg >> 8) & 0xff; + mm1[1] = reg & 0xff; + + if (fw_addr) { + mm1[4] = (value >> 16) & 0xff; + mm1[3] = (value >> 8) & 0xff; + mm1[2] = value & 0xff; + } else { + mm1[2] = value & 0xff; + } + msg.len = fw_addr ? 5 : 3; /* Long Registers have *only* three bytes! */ + msg.buf = mm1; + v4l2_dbg(2, debug, sd, "wrote: reg 0x%03x=%08x\n", reg, value); + return i2c_transfer(adap, &msg, 1) == 1; +} + +static void saa717x_write_regs(struct v4l2_subdev *sd, u32 *data) +{ + while (data[0] || data[1]) { + saa717x_write(sd, data[0], data[1]); + data += 2; + } +} + +static u32 saa717x_read(struct v4l2_subdev *sd, u32 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_adapter *adap = client->adapter; + int fw_addr = (reg >= 0x404 && reg <= 0x4b8) || reg == 0x528; + unsigned char mm1[2]; + unsigned char mm2[4] = { 0, 0, 0, 0 }; + struct i2c_msg msgs[2]; + u32 value; + + msgs[0].flags = 0; + msgs[1].flags = I2C_M_RD; + msgs[0].addr = msgs[1].addr = client->addr; + mm1[0] = (reg >> 8) & 0xff; + mm1[1] = reg & 0xff; + msgs[0].len = 2; + msgs[0].buf = mm1; + msgs[1].len = fw_addr ? 3 : 1; /* Multibyte Registers contains *only* 3 bytes */ + msgs[1].buf = mm2; + i2c_transfer(adap, msgs, 2); + + if (fw_addr) + value = (mm2[2] & 0xff) | ((mm2[1] & 0xff) >> 8) | ((mm2[0] & 0xff) >> 16); + else + value = mm2[0] & 0xff; + + v4l2_dbg(2, debug, sd, "read: reg 0x%03x=0x%08x\n", reg, value); + return value; +} + +/* ----------------------------------------------------------------------- */ + +static u32 reg_init_initialize[] = +{ + /* from linux driver */ + 0x101, 0x008, /* Increment delay */ + + 0x103, 0x000, /* Analog input control 2 */ + 0x104, 0x090, /* Analog input control 3 */ + 0x105, 0x090, /* Analog input control 4 */ + 0x106, 0x0eb, /* Horizontal sync start */ + 0x107, 0x0e0, /* Horizontal sync stop */ + 0x109, 0x055, /* Luminance control */ + + 0x10f, 0x02a, /* Chroma gain control */ + 0x110, 0x000, /* Chroma control 2 */ + + 0x114, 0x045, /* analog/ADC */ + + 0x118, 0x040, /* RAW data gain */ + 0x119, 0x080, /* RAW data offset */ + + 0x044, 0x000, /* VBI horizontal input window start (L) TASK A */ + 0x045, 0x000, /* VBI horizontal input window start (H) TASK A */ + 0x046, 0x0cf, /* VBI horizontal input window stop (L) TASK A */ + 0x047, 0x002, /* VBI horizontal input window stop (H) TASK A */ + + 0x049, 0x000, /* VBI vertical input window start (H) TASK A */ + + 0x04c, 0x0d0, /* VBI horizontal output length (L) TASK A */ + 0x04d, 0x002, /* VBI horizontal output length (H) TASK A */ + + 0x064, 0x080, /* Lumina brightness TASK A */ + 0x065, 0x040, /* Luminance contrast TASK A */ + 0x066, 0x040, /* Chroma saturation TASK A */ + /* 067H: Reserved */ + 0x068, 0x000, /* VBI horizontal scaling increment (L) TASK A */ + 0x069, 0x004, /* VBI horizontal scaling increment (H) TASK A */ + 0x06a, 0x000, /* VBI phase offset TASK A */ + + 0x06e, 0x000, /* Horizontal phase offset Luma TASK A */ + 0x06f, 0x000, /* Horizontal phase offset Chroma TASK A */ + + 0x072, 0x000, /* Vertical filter mode TASK A */ + + 0x084, 0x000, /* VBI horizontal input window start (L) TAKS B */ + 0x085, 0x000, /* VBI horizontal input window start (H) TAKS B */ + 0x086, 0x0cf, /* VBI horizontal input window stop (L) TAKS B */ + 0x087, 0x002, /* VBI horizontal input window stop (H) TAKS B */ + + 0x089, 0x000, /* VBI vertical input window start (H) TAKS B */ + + 0x08c, 0x0d0, /* VBI horizontal output length (L) TASK B */ + 0x08d, 0x002, /* VBI horizontal output length (H) TASK B */ + + 0x0a4, 0x080, /* Lumina brightness TASK B */ + 0x0a5, 0x040, /* Luminance contrast TASK B */ + 0x0a6, 0x040, /* Chroma saturation TASK B */ + /* 0A7H reserved */ + 0x0a8, 0x000, /* VBI horizontal scaling increment (L) TASK B */ + 0x0a9, 0x004, /* VBI horizontal scaling increment (H) TASK B */ + 0x0aa, 0x000, /* VBI phase offset TASK B */ + + 0x0ae, 0x000, /* Horizontal phase offset Luma TASK B */ + 0x0af, 0x000, /*Horizontal phase offset Chroma TASK B */ + + 0x0b2, 0x000, /* Vertical filter mode TASK B */ + + 0x00c, 0x000, /* Start point GREEN path */ + 0x00d, 0x000, /* Start point BLUE path */ + 0x00e, 0x000, /* Start point RED path */ + + 0x010, 0x010, /* GREEN path gamma curve --- */ + 0x011, 0x020, + 0x012, 0x030, + 0x013, 0x040, + 0x014, 0x050, + 0x015, 0x060, + 0x016, 0x070, + 0x017, 0x080, + 0x018, 0x090, + 0x019, 0x0a0, + 0x01a, 0x0b0, + 0x01b, 0x0c0, + 0x01c, 0x0d0, + 0x01d, 0x0e0, + 0x01e, 0x0f0, + 0x01f, 0x0ff, /* --- GREEN path gamma curve */ + + 0x020, 0x010, /* BLUE path gamma curve --- */ + 0x021, 0x020, + 0x022, 0x030, + 0x023, 0x040, + 0x024, 0x050, + 0x025, 0x060, + 0x026, 0x070, + 0x027, 0x080, + 0x028, 0x090, + 0x029, 0x0a0, + 0x02a, 0x0b0, + 0x02b, 0x0c0, + 0x02c, 0x0d0, + 0x02d, 0x0e0, + 0x02e, 0x0f0, + 0x02f, 0x0ff, /* --- BLUE path gamma curve */ + + 0x030, 0x010, /* RED path gamma curve --- */ + 0x031, 0x020, + 0x032, 0x030, + 0x033, 0x040, + 0x034, 0x050, + 0x035, 0x060, + 0x036, 0x070, + 0x037, 0x080, + 0x038, 0x090, + 0x039, 0x0a0, + 0x03a, 0x0b0, + 0x03b, 0x0c0, + 0x03c, 0x0d0, + 0x03d, 0x0e0, + 0x03e, 0x0f0, + 0x03f, 0x0ff, /* --- RED path gamma curve */ + + 0x109, 0x085, /* Luminance control */ + + /**** from app start ****/ + 0x584, 0x000, /* AGC gain control */ + 0x585, 0x000, /* Program count */ + 0x586, 0x003, /* Status reset */ + 0x588, 0x0ff, /* Number of audio samples (L) */ + 0x589, 0x00f, /* Number of audio samples (M) */ + 0x58a, 0x000, /* Number of audio samples (H) */ + 0x58b, 0x000, /* Audio select */ + 0x58c, 0x010, /* Audio channel assign1 */ + 0x58d, 0x032, /* Audio channel assign2 */ + 0x58e, 0x054, /* Audio channel assign3 */ + 0x58f, 0x023, /* Audio format */ + 0x590, 0x000, /* SIF control */ + + 0x595, 0x000, /* ?? */ + 0x596, 0x000, /* ?? */ + 0x597, 0x000, /* ?? */ + + 0x464, 0x00, /* Digital input crossbar1 */ + + 0x46c, 0xbbbb10, /* Digital output selection1-3 */ + 0x470, 0x101010, /* Digital output selection4-6 */ + + 0x478, 0x00, /* Sound feature control */ + + 0x474, 0x18, /* Softmute control */ + + 0x454, 0x0425b9, /* Sound Easy programming(reset) */ + 0x454, 0x042539, /* Sound Easy programming(reset) */ + + + /**** common setting( of DVD play, including scaler commands) ****/ + 0x042, 0x003, /* Data path configuration for VBI (TASK A) */ + + 0x082, 0x003, /* Data path configuration for VBI (TASK B) */ + + 0x108, 0x0f8, /* Sync control */ + 0x2a9, 0x0fd, /* ??? */ + 0x102, 0x089, /* select video input "mode 9" */ + 0x111, 0x000, /* Mode/delay control */ + + 0x10e, 0x00a, /* Chroma control 1 */ + + 0x594, 0x002, /* SIF, analog I/O select */ + + 0x454, 0x0425b9, /* Sound */ + 0x454, 0x042539, + + 0x111, 0x000, + 0x10e, 0x00a, + 0x464, 0x000, + 0x300, 0x000, + 0x301, 0x006, + 0x302, 0x000, + 0x303, 0x006, + 0x308, 0x040, + 0x309, 0x000, + 0x30a, 0x000, + 0x30b, 0x000, + 0x000, 0x002, + 0x001, 0x000, + 0x002, 0x000, + 0x003, 0x000, + 0x004, 0x033, + 0x040, 0x01d, + 0x041, 0x001, + 0x042, 0x004, + 0x043, 0x000, + 0x080, 0x01e, + 0x081, 0x001, + 0x082, 0x004, + 0x083, 0x000, + 0x190, 0x018, + 0x115, 0x000, + 0x116, 0x012, + 0x117, 0x018, + 0x04a, 0x011, + 0x08a, 0x011, + 0x04b, 0x000, + 0x08b, 0x000, + 0x048, 0x000, + 0x088, 0x000, + 0x04e, 0x012, + 0x08e, 0x012, + 0x058, 0x012, + 0x098, 0x012, + 0x059, 0x000, + 0x099, 0x000, + 0x05a, 0x003, + 0x09a, 0x003, + 0x05b, 0x001, + 0x09b, 0x001, + 0x054, 0x008, + 0x094, 0x008, + 0x055, 0x000, + 0x095, 0x000, + 0x056, 0x0c7, + 0x096, 0x0c7, + 0x057, 0x002, + 0x097, 0x002, + 0x0ff, 0x0ff, + 0x060, 0x001, + 0x0a0, 0x001, + 0x061, 0x000, + 0x0a1, 0x000, + 0x062, 0x000, + 0x0a2, 0x000, + 0x063, 0x000, + 0x0a3, 0x000, + 0x070, 0x000, + 0x0b0, 0x000, + 0x071, 0x004, + 0x0b1, 0x004, + 0x06c, 0x0e9, + 0x0ac, 0x0e9, + 0x06d, 0x003, + 0x0ad, 0x003, + 0x05c, 0x0d0, + 0x09c, 0x0d0, + 0x05d, 0x002, + 0x09d, 0x002, + 0x05e, 0x0f2, + 0x09e, 0x0f2, + 0x05f, 0x000, + 0x09f, 0x000, + 0x074, 0x000, + 0x0b4, 0x000, + 0x075, 0x000, + 0x0b5, 0x000, + 0x076, 0x000, + 0x0b6, 0x000, + 0x077, 0x000, + 0x0b7, 0x000, + 0x195, 0x008, + 0x0ff, 0x0ff, + 0x108, 0x0f8, + 0x111, 0x000, + 0x10e, 0x00a, + 0x2a9, 0x0fd, + 0x464, 0x001, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + + + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x193, 0x000, + 0x300, 0x000, + 0x301, 0x006, + 0x302, 0x000, + 0x303, 0x006, + 0x308, 0x040, + 0x309, 0x000, + 0x30a, 0x000, + 0x30b, 0x000, + 0x000, 0x002, + 0x001, 0x000, + 0x002, 0x000, + 0x003, 0x000, + 0x004, 0x033, + 0x040, 0x01d, + 0x041, 0x001, + 0x042, 0x004, + 0x043, 0x000, + 0x080, 0x01e, + 0x081, 0x001, + 0x082, 0x004, + 0x083, 0x000, + 0x190, 0x018, + 0x115, 0x000, + 0x116, 0x012, + 0x117, 0x018, + 0x04a, 0x011, + 0x08a, 0x011, + 0x04b, 0x000, + 0x08b, 0x000, + 0x048, 0x000, + 0x088, 0x000, + 0x04e, 0x012, + 0x08e, 0x012, + 0x058, 0x012, + 0x098, 0x012, + 0x059, 0x000, + 0x099, 0x000, + 0x05a, 0x003, + 0x09a, 0x003, + 0x05b, 0x001, + 0x09b, 0x001, + 0x054, 0x008, + 0x094, 0x008, + 0x055, 0x000, + 0x095, 0x000, + 0x056, 0x0c7, + 0x096, 0x0c7, + 0x057, 0x002, + 0x097, 0x002, + 0x060, 0x001, + 0x0a0, 0x001, + 0x061, 0x000, + 0x0a1, 0x000, + 0x062, 0x000, + 0x0a2, 0x000, + 0x063, 0x000, + 0x0a3, 0x000, + 0x070, 0x000, + 0x0b0, 0x000, + 0x071, 0x004, + 0x0b1, 0x004, + 0x06c, 0x0e9, + 0x0ac, 0x0e9, + 0x06d, 0x003, + 0x0ad, 0x003, + 0x05c, 0x0d0, + 0x09c, 0x0d0, + 0x05d, 0x002, + 0x09d, 0x002, + 0x05e, 0x0f2, + 0x09e, 0x0f2, + 0x05f, 0x000, + 0x09f, 0x000, + 0x074, 0x000, + 0x0b4, 0x000, + 0x075, 0x000, + 0x0b5, 0x000, + 0x076, 0x000, + 0x0b6, 0x000, + 0x077, 0x000, + 0x0b7, 0x000, + 0x195, 0x008, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x193, 0x0a6, + 0x108, 0x0f8, + 0x042, 0x003, + 0x082, 0x003, + 0x454, 0x0425b9, + 0x454, 0x042539, + 0x193, 0x000, + 0x193, 0x0a6, + 0x464, 0x000, + + 0, 0 +}; + +/* Tuner */ +static u32 reg_init_tuner_input[] = { + 0x108, 0x0f8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x00a, /* Chroma control 1 */ + 0, 0 +}; + +/* Composite */ +static u32 reg_init_composite_input[] = { + 0x108, 0x0e8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x04a, /* Chroma control 1 */ + 0, 0 +}; + +/* S-Video */ +static u32 reg_init_svideo_input[] = { + 0x108, 0x0e8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x04a, /* Chroma control 1 */ + 0, 0 +}; + +static u32 reg_set_audio_template[4][2] = +{ + { /* for MONO + tadachi 6/29 DMA audio output select? + Register 0x46c + 7-4: DMA2, 3-0: DMA1 ch. DMA4, DMA3 DMA2, DMA1 + 0: MAIN left, 1: MAIN right + 2: AUX1 left, 3: AUX1 right + 4: AUX2 left, 5: AUX2 right + 6: DPL left, 7: DPL right + 8: DPL center, 9: DPL surround + A: monitor output, B: digital sense */ + 0xbbbb00, + + /* tadachi 6/29 DAC and I2S output select? + Register 0x470 + 7-4:DAC right ch. 3-0:DAC left ch. + I2S1 right,left I2S2 right,left */ + 0x00, + }, + { /* for STEREO */ + 0xbbbb10, 0x101010, + }, + { /* for LANG1 */ + 0xbbbb00, 0x00, + }, + { /* for LANG2/SAP */ + 0xbbbb11, 0x111111, + } +}; + + +/* Get detected audio flags (from saa7134 driver) */ +static void get_inf_dev_status(struct v4l2_subdev *sd, + int *dual_flag, int *stereo_flag) +{ + u32 reg_data3; + + static char *stdres[0x20] = { + [0x00] = "no standard detected", + [0x01] = "B/G (in progress)", + [0x02] = "D/K (in progress)", + [0x03] = "M (in progress)", + + [0x04] = "B/G A2", + [0x05] = "B/G NICAM", + [0x06] = "D/K A2 (1)", + [0x07] = "D/K A2 (2)", + [0x08] = "D/K A2 (3)", + [0x09] = "D/K NICAM", + [0x0a] = "L NICAM", + [0x0b] = "I NICAM", + + [0x0c] = "M Korea", + [0x0d] = "M BTSC ", + [0x0e] = "M EIAJ", + + [0x0f] = "FM radio / IF 10.7 / 50 deemp", + [0x10] = "FM radio / IF 10.7 / 75 deemp", + [0x11] = "FM radio / IF sel / 50 deemp", + [0x12] = "FM radio / IF sel / 75 deemp", + + [0x13 ... 0x1e] = "unknown", + [0x1f] = "??? [in progress]", + }; + + + *dual_flag = *stereo_flag = 0; + + /* (demdec status: 0x528) */ + + /* read current status */ + reg_data3 = saa717x_read(sd, 0x0528); + + v4l2_dbg(1, debug, sd, "tvaudio thread status: 0x%x [%s%s%s]\n", + reg_data3, stdres[reg_data3 & 0x1f], + (reg_data3 & 0x000020) ? ",stereo" : "", + (reg_data3 & 0x000040) ? ",dual" : ""); + v4l2_dbg(1, debug, sd, "detailed status: " + "%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n", + (reg_data3 & 0x000080) ? " A2/EIAJ pilot tone " : "", + (reg_data3 & 0x000100) ? " A2/EIAJ dual " : "", + (reg_data3 & 0x000200) ? " A2/EIAJ stereo " : "", + (reg_data3 & 0x000400) ? " A2/EIAJ noise mute " : "", + + (reg_data3 & 0x000800) ? " BTSC/FM radio pilot " : "", + (reg_data3 & 0x001000) ? " SAP carrier " : "", + (reg_data3 & 0x002000) ? " BTSC stereo noise mute " : "", + (reg_data3 & 0x004000) ? " SAP noise mute " : "", + (reg_data3 & 0x008000) ? " VDSP " : "", + + (reg_data3 & 0x010000) ? " NICST " : "", + (reg_data3 & 0x020000) ? " NICDU " : "", + (reg_data3 & 0x040000) ? " NICAM muted " : "", + (reg_data3 & 0x080000) ? " NICAM reserve sound " : "", + + (reg_data3 & 0x100000) ? " init done " : ""); + + if (reg_data3 & 0x000220) { + v4l2_dbg(1, debug, sd, "ST!!!\n"); + *stereo_flag = 1; + } + + if (reg_data3 & 0x000140) { + v4l2_dbg(1, debug, sd, "DUAL!!!\n"); + *dual_flag = 1; + } +} + +/* regs write to set audio mode */ +static void set_audio_mode(struct v4l2_subdev *sd, int audio_mode) +{ + v4l2_dbg(1, debug, sd, "writing registers to set audio mode by set %d\n", + audio_mode); + + saa717x_write(sd, 0x46c, reg_set_audio_template[audio_mode][0]); + saa717x_write(sd, 0x470, reg_set_audio_template[audio_mode][1]); +} + +/* write regs to set audio volume, bass and treble */ +static int set_audio_regs(struct v4l2_subdev *sd, + struct saa717x_state *decoder) +{ + u8 mute = 0xac; /* -84 dB */ + u32 val; + unsigned int work_l, work_r; + + /* set SIF analog I/O select */ + saa717x_write(sd, 0x0594, decoder->audio_input); + v4l2_dbg(1, debug, sd, "set audio input %d\n", + decoder->audio_input); + + /* normalize ( 65535 to 0 -> 24 to -40 (not -84)) */ + work_l = (min(65536 - decoder->audio_main_balance, 32768) * decoder->audio_main_volume) / 32768; + work_r = (min(decoder->audio_main_balance, (u16)32768) * decoder->audio_main_volume) / 32768; + decoder->audio_main_vol_l = (long)work_l * (24 - (-40)) / 65535 - 40; + decoder->audio_main_vol_r = (long)work_r * (24 - (-40)) / 65535 - 40; + + /* set main volume */ + /* main volume L[7-0],R[7-0],0x00 24=24dB,-83dB, -84(mute) */ + /* def:0dB->6dB(MPG600GR) */ + /* if mute is on, set mute */ + if (decoder->audio_main_mute) { + val = mute | (mute << 8); + } else { + val = (u8)decoder->audio_main_vol_l | + ((u8)decoder->audio_main_vol_r << 8); + } + + saa717x_write(sd, 0x480, val); + + /* set bass and treble */ + val = decoder->audio_main_bass & 0x1f; + val |= (decoder->audio_main_treble & 0x1f) << 5; + saa717x_write(sd, 0x488, val); + return 0; +} + +/********** scaling staff ***********/ +static void set_h_prescale(struct v4l2_subdev *sd, + int task, int prescale) +{ + static const struct { + int xpsc; + int xacl; + int xc2_1; + int xdcg; + int vpfy; + } vals[] = { + /* XPSC XACL XC2_1 XDCG VPFY */ + { 1, 0, 0, 0, 0 }, + { 2, 2, 1, 2, 2 }, + { 3, 4, 1, 3, 2 }, + { 4, 8, 1, 4, 2 }, + { 5, 8, 1, 4, 2 }, + { 6, 8, 1, 4, 3 }, + { 7, 8, 1, 4, 3 }, + { 8, 15, 0, 4, 3 }, + { 9, 15, 0, 4, 3 }, + { 10, 16, 1, 5, 3 }, + }; + static const int count = ARRAY_SIZE(vals); + int i, task_shift; + + task_shift = task * 0x40; + for (i = 0; i < count; i++) + if (vals[i].xpsc == prescale) + break; + if (i == count) + return; + + /* horizonal prescaling */ + saa717x_write(sd, 0x60 + task_shift, vals[i].xpsc); + /* accumulation length */ + saa717x_write(sd, 0x61 + task_shift, vals[i].xacl); + /* level control */ + saa717x_write(sd, 0x62 + task_shift, + (vals[i].xc2_1 << 3) | vals[i].xdcg); + /*FIR prefilter control */ + saa717x_write(sd, 0x63 + task_shift, + (vals[i].vpfy << 2) | vals[i].vpfy); +} + +/********** scaling staff ***********/ +static void set_v_scale(struct v4l2_subdev *sd, int task, int yscale) +{ + int task_shift; + + task_shift = task * 0x40; + /* Vertical scaling ratio (LOW) */ + saa717x_write(sd, 0x70 + task_shift, yscale & 0xff); + /* Vertical scaling ratio (HI) */ + saa717x_write(sd, 0x71 + task_shift, yscale >> 8); +} + +static int saa717x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct saa717x_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + saa717x_write(sd, 0x10a, ctrl->val); + return 0; + + case V4L2_CID_CONTRAST: + saa717x_write(sd, 0x10b, ctrl->val); + return 0; + + case V4L2_CID_SATURATION: + saa717x_write(sd, 0x10c, ctrl->val); + return 0; + + case V4L2_CID_HUE: + saa717x_write(sd, 0x10d, ctrl->val); + return 0; + + case V4L2_CID_AUDIO_MUTE: + state->audio_main_mute = ctrl->val; + break; + + case V4L2_CID_AUDIO_VOLUME: + state->audio_main_volume = ctrl->val; + break; + + case V4L2_CID_AUDIO_BALANCE: + state->audio_main_balance = ctrl->val; + break; + + case V4L2_CID_AUDIO_TREBLE: + state->audio_main_treble = ctrl->val; + break; + + case V4L2_CID_AUDIO_BASS: + state->audio_main_bass = ctrl->val; + break; + + default: + return 0; + } + set_audio_regs(sd, state); + return 0; +} + +static int saa717x_s_video_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa717x_state *decoder = to_state(sd); + int is_tuner = input & 0x80; /* tuner input flag */ + + input &= 0x7f; + + v4l2_dbg(1, debug, sd, "decoder set input (%d)\n", input); + /* inputs from 0-9 are available*/ + /* saa717x have mode0-mode9 but mode5 is reserved. */ + if (input > 9 || input == 5) + return -EINVAL; + + if (decoder->input != input) { + int input_line = input; + + decoder->input = input_line; + v4l2_dbg(1, debug, sd, "now setting %s input %d\n", + input_line >= 6 ? "S-Video" : "Composite", + input_line); + + /* select mode */ + saa717x_write(sd, 0x102, + (saa717x_read(sd, 0x102) & 0xf0) | + input_line); + + /* bypass chrominance trap for modes 6..9 */ + saa717x_write(sd, 0x109, + (saa717x_read(sd, 0x109) & 0x7f) | + (input_line < 6 ? 0x0 : 0x80)); + + /* change audio_mode */ + if (is_tuner) { + /* tuner */ + set_audio_mode(sd, decoder->tuner_audio_mode); + } else { + /* Force to STEREO mode if Composite or + * S-Video were chosen */ + set_audio_mode(sd, TUNER_AUDIO_STEREO); + } + /* change initialize procedure (Composite/S-Video) */ + if (is_tuner) + saa717x_write_regs(sd, reg_init_tuner_input); + else if (input_line >= 6) + saa717x_write_regs(sd, reg_init_svideo_input); + else + saa717x_write_regs(sd, reg_init_composite_input); + } + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int saa717x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = saa717x_read(sd, reg->reg); + reg->size = 1; + return 0; +} + +static int saa717x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u16 addr = reg->reg & 0xffff; + u8 val = reg->val & 0xff; + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa717x_write(sd, addr, val); + return 0; +} +#endif + +static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + int prescale, h_scale, v_scale; + + v4l2_dbg(1, debug, sd, "decoder set size\n"); + + if (fmt->code != V4L2_MBUS_FMT_FIXED) + return -EINVAL; + + /* FIXME need better bounds checking here */ + if (fmt->width < 1 || fmt->width > 1440) + return -EINVAL; + if (fmt->height < 1 || fmt->height > 960) + return -EINVAL; + + fmt->field = V4L2_FIELD_INTERLACED; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + + /* scaling setting */ + /* NTSC and interlace only */ + prescale = SAA717X_NTSC_WIDTH / fmt->width; + if (prescale == 0) + prescale = 1; + h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / fmt->width; + /* interlace */ + v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / fmt->height; + + /* Horizontal prescaling etc */ + set_h_prescale(sd, 0, prescale); + set_h_prescale(sd, 1, prescale); + + /* Horizontal scaling increment */ + /* TASK A */ + saa717x_write(sd, 0x6C, (u8)(h_scale & 0xFF)); + saa717x_write(sd, 0x6D, (u8)((h_scale >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(sd, 0xAC, (u8)(h_scale & 0xFF)); + saa717x_write(sd, 0xAD, (u8)((h_scale >> 8) & 0xFF)); + + /* Vertical prescaling etc */ + set_v_scale(sd, 0, v_scale); + set_v_scale(sd, 1, v_scale); + + /* set video output size */ + /* video number of pixels at output */ + /* TASK A */ + saa717x_write(sd, 0x5C, (u8)(fmt->width & 0xFF)); + saa717x_write(sd, 0x5D, (u8)((fmt->width >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(sd, 0x9C, (u8)(fmt->width & 0xFF)); + saa717x_write(sd, 0x9D, (u8)((fmt->width >> 8) & 0xFF)); + + /* video number of lines at output */ + /* TASK A */ + saa717x_write(sd, 0x5E, (u8)(fmt->height & 0xFF)); + saa717x_write(sd, 0x5F, (u8)((fmt->height >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(sd, 0x9E, (u8)(fmt->height & 0xFF)); + saa717x_write(sd, 0x9F, (u8)((fmt->height >> 8) & 0xFF)); + return 0; +} + +static int saa717x_s_radio(struct v4l2_subdev *sd) +{ + struct saa717x_state *decoder = to_state(sd); + + decoder->radio = 1; + return 0; +} + +static int saa717x_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa717x_state *decoder = to_state(sd); + + v4l2_dbg(1, debug, sd, "decoder set norm "); + v4l2_dbg(1, debug, sd, "(not yet implementd)\n"); + + decoder->radio = 0; + decoder->std = std; + return 0; +} + +static int saa717x_s_audio_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa717x_state *decoder = to_state(sd); + + if (input < 3) { /* FIXME! --tadachi */ + decoder->audio_input = input; + v4l2_dbg(1, debug, sd, + "set decoder audio input to %d\n", + decoder->audio_input); + set_audio_regs(sd, decoder); + return 0; + } + return -ERANGE; +} + +static int saa717x_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct saa717x_state *decoder = to_state(sd); + + v4l2_dbg(1, debug, sd, "decoder %s output\n", + enable ? "enable" : "disable"); + decoder->enable = enable; + saa717x_write(sd, 0x193, enable ? 0xa6 : 0x26); + return 0; +} + +/* change audio mode */ +static int saa717x_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct saa717x_state *decoder = to_state(sd); + int audio_mode; + char *mes[4] = { + "MONO", "STEREO", "LANG1", "LANG2/SAP" + }; + + audio_mode = TUNER_AUDIO_STEREO; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + audio_mode = TUNER_AUDIO_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + audio_mode = TUNER_AUDIO_STEREO; + break; + case V4L2_TUNER_MODE_LANG2: + audio_mode = TUNER_AUDIO_LANG2; + break; + case V4L2_TUNER_MODE_LANG1: + audio_mode = TUNER_AUDIO_LANG1; + break; + } + + v4l2_dbg(1, debug, sd, "change audio mode to %s\n", + mes[audio_mode]); + decoder->tuner_audio_mode = audio_mode; + /* The registers are not changed here. */ + /* See DECODER_ENABLE_OUTPUT section. */ + set_audio_mode(sd, decoder->tuner_audio_mode); + return 0; +} + +static int saa717x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa717x_state *decoder = to_state(sd); + int dual_f, stereo_f; + + if (decoder->radio) + return 0; + get_inf_dev_status(sd, &dual_f, &stereo_f); + + v4l2_dbg(1, debug, sd, "DETECT==st:%d dual:%d\n", + stereo_f, dual_f); + + /* mono */ + if ((dual_f == 0) && (stereo_f == 0)) { + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + v4l2_dbg(1, debug, sd, "DETECT==MONO\n"); + } + + /* stereo */ + if (stereo_f == 1) { + if (vt->audmode == V4L2_TUNER_MODE_STEREO || + vt->audmode == V4L2_TUNER_MODE_LANG1) { + vt->rxsubchans = V4L2_TUNER_SUB_STEREO; + v4l2_dbg(1, debug, sd, "DETECT==ST(ST)\n"); + } else { + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + v4l2_dbg(1, debug, sd, "DETECT==ST(MONO)\n"); + } + } + + /* dual */ + if (dual_f == 1) { + if (vt->audmode == V4L2_TUNER_MODE_LANG2) { + vt->rxsubchans = V4L2_TUNER_SUB_LANG2 | V4L2_TUNER_SUB_MONO; + v4l2_dbg(1, debug, sd, "DETECT==DUAL1\n"); + } else { + vt->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_MONO; + v4l2_dbg(1, debug, sd, "DETECT==DUAL2\n"); + } + } + return 0; +} + +static int saa717x_log_status(struct v4l2_subdev *sd) +{ + struct saa717x_state *state = to_state(sd); + + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops saa717x_ctrl_ops = { + .s_ctrl = saa717x_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops saa717x_core_ops = { +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = saa717x_g_register, + .s_register = saa717x_s_register, +#endif + .s_std = saa717x_s_std, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .log_status = saa717x_log_status, +}; + +static const struct v4l2_subdev_tuner_ops saa717x_tuner_ops = { + .g_tuner = saa717x_g_tuner, + .s_tuner = saa717x_s_tuner, + .s_radio = saa717x_s_radio, +}; + +static const struct v4l2_subdev_video_ops saa717x_video_ops = { + .s_routing = saa717x_s_video_routing, + .s_mbus_fmt = saa717x_s_mbus_fmt, + .s_stream = saa717x_s_stream, +}; + +static const struct v4l2_subdev_audio_ops saa717x_audio_ops = { + .s_routing = saa717x_s_audio_routing, +}; + +static const struct v4l2_subdev_ops saa717x_ops = { + .core = &saa717x_core_ops, + .tuner = &saa717x_tuner_ops, + .audio = &saa717x_audio_ops, + .video = &saa717x_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + + +/* i2c implementation */ + +/* ----------------------------------------------------------------------- */ +static int saa717x_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct saa717x_state *decoder; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + u8 id = 0; + char *p = ""; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + decoder = kzalloc(sizeof(struct saa717x_state), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &saa717x_ops); + + if (saa717x_write(sd, 0x5a4, 0xfe) && + saa717x_write(sd, 0x5a5, 0x0f) && + saa717x_write(sd, 0x5a6, 0x00) && + saa717x_write(sd, 0x5a7, 0x01)) + id = saa717x_read(sd, 0x5a0); + if (id != 0xc2 && id != 0x32 && id != 0xf2 && id != 0x6c) { + v4l2_dbg(1, debug, sd, "saa717x not found (id=%02x)\n", id); + kfree(decoder); + return -ENODEV; + } + if (id == 0xc2) + p = "saa7173"; + else if (id == 0x32) + p = "saa7174A"; + else if (id == 0x6c) + p = "saa7174HL"; + else + p = "saa7171"; + v4l2_info(sd, "%s found @ 0x%x (%s)\n", p, + client->addr << 1, client->adapter->name); + + hdl = &decoder->hdl; + v4l2_ctrl_handler_init(hdl, 9); + /* add in ascending ID order */ + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 68); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 64); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 42000); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_BASS, -16, 15, 1, 0); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, -16, 15, 1, 0); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(decoder); + return err; + } + + decoder->std = V4L2_STD_NTSC; + decoder->input = -1; + decoder->enable = 1; + + /* FIXME!! */ + decoder->playback = 0; /* initially capture mode used */ + decoder->audio = 1; /* DECODER_AUDIO_48_KHZ */ + + decoder->audio_input = 2; /* FIXME!! */ + + decoder->tuner_audio_mode = TUNER_AUDIO_STEREO; + /* set volume, bass and treble */ + decoder->audio_main_vol_l = 6; + decoder->audio_main_vol_r = 6; + + v4l2_dbg(1, debug, sd, "writing init values\n"); + + /* FIXME!! */ + saa717x_write_regs(sd, reg_init_initialize); + + v4l2_ctrl_handler_setup(hdl); + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2*HZ); + return 0; +} + +static int saa717x_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa717x_id[] = { + { "saa717x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa717x_id); + +static struct i2c_driver saa717x_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa717x", + }, + .probe = saa717x_probe, + .remove = saa717x_remove, + .id_table = saa717x_id, +}; + +module_i2c_driver(saa717x_driver); diff --git a/drivers/media/i2c/saa7185.c b/drivers/media/i2c/saa7185.c new file mode 100644 index 00000000..2c6b65c7 --- /dev/null +++ b/drivers/media/i2c/saa7185.c @@ -0,0 +1,377 @@ +/* + * saa7185 - Philips SAA7185B video encoder driver version 0.0.3 + * + * Copyright (C) 1998 Dave Perks + * + * Slight changes for video timing and attachment output by + * Wolfgang Scherr + * + * Changes by Ronald Bultje + * - moved over to linux>=2.4.x i2c protocol (1/1/2003) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Philips SAA7185 video encoder driver"); +MODULE_AUTHOR("Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +struct saa7185 { + struct v4l2_subdev sd; + unsigned char reg[128]; + + v4l2_std_id norm; +}; + +static inline struct saa7185 *to_saa7185(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa7185, sd); +} + +/* ----------------------------------------------------------------------- */ + +static inline int saa7185_read(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte(client); +} + +static int saa7185_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7185 *encoder = to_saa7185(sd); + + v4l2_dbg(1, debug, sd, "%02x set to %02x\n", reg, value); + encoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int saa7185_write_block(struct v4l2_subdev *sd, + const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7185 *encoder = to_saa7185(sd); + int ret = -1; + u8 reg; + + /* the adv7175 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + u8 block_data[32]; + int block_len; + + while (len >= 2) { + block_len = 0; + block_data[block_len++] = reg = data[0]; + do { + block_data[block_len++] = + encoder->reg[reg++] = data[1]; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + ret = saa7185_write(sd, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + } + + return ret; +} + +/* ----------------------------------------------------------------------- */ + +static const unsigned char init_common[] = { + 0x3a, 0x0f, /* CBENB=0, V656=0, VY2C=1, + * YUV2C=1, MY2C=1, MUV2C=1 */ + + 0x42, 0x6b, /* OVLY0=107 */ + 0x43, 0x00, /* OVLU0=0 white */ + 0x44, 0x00, /* OVLV0=0 */ + 0x45, 0x22, /* OVLY1=34 */ + 0x46, 0xac, /* OVLU1=172 yellow */ + 0x47, 0x0e, /* OVLV1=14 */ + 0x48, 0x03, /* OVLY2=3 */ + 0x49, 0x1d, /* OVLU2=29 cyan */ + 0x4a, 0xac, /* OVLV2=172 */ + 0x4b, 0xf0, /* OVLY3=240 */ + 0x4c, 0xc8, /* OVLU3=200 green */ + 0x4d, 0xb9, /* OVLV3=185 */ + 0x4e, 0xd4, /* OVLY4=212 */ + 0x4f, 0x38, /* OVLU4=56 magenta */ + 0x50, 0x47, /* OVLV4=71 */ + 0x51, 0xc1, /* OVLY5=193 */ + 0x52, 0xe3, /* OVLU5=227 red */ + 0x53, 0x54, /* OVLV5=84 */ + 0x54, 0xa3, /* OVLY6=163 */ + 0x55, 0x54, /* OVLU6=84 blue */ + 0x56, 0xf2, /* OVLV6=242 */ + 0x57, 0x90, /* OVLY7=144 */ + 0x58, 0x00, /* OVLU7=0 black */ + 0x59, 0x00, /* OVLV7=0 */ + + 0x5a, 0x00, /* CHPS=0 */ + 0x5b, 0x76, /* GAINU=118 */ + 0x5c, 0xa5, /* GAINV=165 */ + 0x5d, 0x3c, /* BLCKL=60 */ + 0x5e, 0x3a, /* BLNNL=58 */ + 0x5f, 0x3a, /* CCRS=0, BLNVB=58 */ + 0x60, 0x00, /* NULL */ + + /* 0x61 - 0x66 set according to norm */ + + 0x67, 0x00, /* 0 : caption 1st byte odd field */ + 0x68, 0x00, /* 0 : caption 2nd byte odd field */ + 0x69, 0x00, /* 0 : caption 1st byte even field */ + 0x6a, 0x00, /* 0 : caption 2nd byte even field */ + + 0x6b, 0x91, /* MODIN=2, PCREF=0, SCCLN=17 */ + 0x6c, 0x20, /* SRCV1=0, TRCV2=1, ORCV1=0, PRCV1=0, + * CBLF=0, ORCV2=0, PRCV2=0 */ + 0x6d, 0x00, /* SRCM1=0, CCEN=0 */ + + 0x6e, 0x0e, /* HTRIG=0x005, approx. centered, at + * least for PAL */ + 0x6f, 0x00, /* HTRIG upper bits */ + 0x70, 0x20, /* PHRES=0, SBLN=1, VTRIG=0 */ + + /* The following should not be needed */ + + 0x71, 0x15, /* BMRQ=0x115 */ + 0x72, 0x90, /* EMRQ=0x690 */ + 0x73, 0x61, /* EMRQ=0x690, BMRQ=0x115 */ + 0x74, 0x00, /* NULL */ + 0x75, 0x00, /* NULL */ + 0x76, 0x00, /* NULL */ + 0x77, 0x15, /* BRCV=0x115 */ + 0x78, 0x90, /* ERCV=0x690 */ + 0x79, 0x61, /* ERCV=0x690, BRCV=0x115 */ + + /* Field length controls */ + + 0x7a, 0x70, /* FLC=0 */ + + /* The following should not be needed if SBLN = 1 */ + + 0x7b, 0x16, /* FAL=22 */ + 0x7c, 0x35, /* LAL=244 */ + 0x7d, 0x20, /* LAL=244, FAL=22 */ +}; + +static const unsigned char init_pal[] = { + 0x61, 0x1e, /* FISE=0, PAL=1, SCBW=1, RTCE=1, + * YGS=1, INPI=0, DOWN=0 */ + 0x62, 0xc8, /* DECTYP=1, BSTA=72 */ + 0x63, 0xcb, /* FSC0 */ + 0x64, 0x8a, /* FSC1 */ + 0x65, 0x09, /* FSC2 */ + 0x66, 0x2a, /* FSC3 */ +}; + +static const unsigned char init_ntsc[] = { + 0x61, 0x1d, /* FISE=1, PAL=0, SCBW=1, RTCE=1, + * YGS=1, INPI=0, DOWN=0 */ + 0x62, 0xe6, /* DECTYP=1, BSTA=102 */ + 0x63, 0x1f, /* FSC0 */ + 0x64, 0x7c, /* FSC1 */ + 0x65, 0xf0, /* FSC2 */ + 0x66, 0x21, /* FSC3 */ +}; + + +static int saa7185_init(struct v4l2_subdev *sd, u32 val) +{ + struct saa7185 *encoder = to_saa7185(sd); + + saa7185_write_block(sd, init_common, sizeof(init_common)); + if (encoder->norm & V4L2_STD_NTSC) + saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc)); + else + saa7185_write_block(sd, init_pal, sizeof(init_pal)); + return 0; +} + +static int saa7185_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa7185 *encoder = to_saa7185(sd); + + if (std & V4L2_STD_NTSC) + saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc)); + else if (std & V4L2_STD_PAL) + saa7185_write_block(sd, init_pal, sizeof(init_pal)); + else + return -EINVAL; + encoder->norm = std; + return 0; +} + +static int saa7185_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa7185 *encoder = to_saa7185(sd); + + /* RJ: input = 0: input is from SA7111 + input = 1: input is from ZR36060 */ + + switch (input) { + case 0: + /* turn off colorbar */ + saa7185_write(sd, 0x3a, 0x0f); + /* Switch RTCE to 1 */ + saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x08); + saa7185_write(sd, 0x6e, 0x01); + break; + + case 1: + /* turn off colorbar */ + saa7185_write(sd, 0x3a, 0x0f); + /* Switch RTCE to 0 */ + saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x00); + /* SW: a slight sync problem... */ + saa7185_write(sd, 0x6e, 0x00); + break; + + case 2: + /* turn on colorbar */ + saa7185_write(sd, 0x3a, 0x8f); + /* Switch RTCE to 0 */ + saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x08); + /* SW: a slight sync problem... */ + saa7185_write(sd, 0x6e, 0x01); + break; + + default: + return -EINVAL; + } + return 0; +} + +static int saa7185_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7185, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa7185_core_ops = { + .g_chip_ident = saa7185_g_chip_ident, + .init = saa7185_init, +}; + +static const struct v4l2_subdev_video_ops saa7185_video_ops = { + .s_std_output = saa7185_s_std_output, + .s_routing = saa7185_s_routing, +}; + +static const struct v4l2_subdev_ops saa7185_ops = { + .core = &saa7185_core_ops, + .video = &saa7185_video_ops, +}; + + +/* ----------------------------------------------------------------------- */ + +static int saa7185_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i; + struct saa7185 *encoder; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(struct saa7185), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + encoder->norm = V4L2_STD_NTSC; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &saa7185_ops); + + i = saa7185_write_block(sd, init_common, sizeof(init_common)); + if (i >= 0) + i = saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc)); + if (i < 0) + v4l2_dbg(1, debug, sd, "init error %d\n", i); + else + v4l2_dbg(1, debug, sd, "revision 0x%x\n", + saa7185_read(sd) >> 5); + return 0; +} + +static int saa7185_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct saa7185 *encoder = to_saa7185(sd); + + v4l2_device_unregister_subdev(sd); + /* SW: output off is active */ + saa7185_write(sd, 0x61, (encoder->reg[0x61]) | 0x40); + kfree(encoder); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa7185_id[] = { + { "saa7185", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7185_id); + +static struct i2c_driver saa7185_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7185", + }, + .probe = saa7185_probe, + .remove = saa7185_remove, + .id_table = saa7185_id, +}; + +module_i2c_driver(saa7185_driver); diff --git a/drivers/media/i2c/saa7191.c b/drivers/media/i2c/saa7191.c new file mode 100644 index 00000000..d7d1670e --- /dev/null +++ b/drivers/media/i2c/saa7191.c @@ -0,0 +1,659 @@ +/* + * saa7191.c - Philips SAA7191 video decoder driver + * + * Copyright (C) 2003 Ladislav Michl + * Copyright (C) 2004,2005 Mikael Nousiainen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "saa7191.h" + +#define SAA7191_MODULE_VERSION "0.0.5" + +MODULE_DESCRIPTION("Philips SAA7191 video decoder driver"); +MODULE_VERSION(SAA7191_MODULE_VERSION); +MODULE_AUTHOR("Mikael Nousiainen "); +MODULE_LICENSE("GPL"); + + +// #define SAA7191_DEBUG + +#ifdef SAA7191_DEBUG +#define dprintk(x...) printk("SAA7191: " x); +#else +#define dprintk(x...) +#endif + +#define SAA7191_SYNC_COUNT 30 +#define SAA7191_SYNC_DELAY 100 /* milliseconds */ + +struct saa7191 { + struct v4l2_subdev sd; + + /* the register values are stored here as the actual + * I2C-registers are write-only */ + u8 reg[25]; + + int input; + v4l2_std_id norm; +}; + +static inline struct saa7191 *to_saa7191(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa7191, sd); +} + +static const u8 initseq[] = { + 0, /* Subaddress */ + + 0x50, /* (0x50) SAA7191_REG_IDEL */ + + /* 50 Hz signal timing */ + 0x30, /* (0x30) SAA7191_REG_HSYB */ + 0x00, /* (0x00) SAA7191_REG_HSYS */ + 0xe8, /* (0xe8) SAA7191_REG_HCLB */ + 0xb6, /* (0xb6) SAA7191_REG_HCLS */ + 0xf4, /* (0xf4) SAA7191_REG_HPHI */ + + /* control */ + SAA7191_LUMA_APER_1, /* (0x01) SAA7191_REG_LUMA - CVBS mode */ + 0x00, /* (0x00) SAA7191_REG_HUEC */ + 0xf8, /* (0xf8) SAA7191_REG_CKTQ */ + 0xf8, /* (0xf8) SAA7191_REG_CKTS */ + 0x90, /* (0x90) SAA7191_REG_PLSE */ + 0x90, /* (0x90) SAA7191_REG_SESE */ + 0x00, /* (0x00) SAA7191_REG_GAIN */ + SAA7191_STDC_NFEN | SAA7191_STDC_HRMV, /* (0x0c) SAA7191_REG_STDC + * - not SECAM, + * slow time constant */ + SAA7191_IOCK_OEDC | SAA7191_IOCK_OEHS | SAA7191_IOCK_OEVS + | SAA7191_IOCK_OEDY, /* (0x78) SAA7191_REG_IOCK + * - chroma from CVBS, GPSW1 & 2 off */ + SAA7191_CTL3_AUFD | SAA7191_CTL3_SCEN | SAA7191_CTL3_OFTS + | SAA7191_CTL3_YDEL0, /* (0x99) SAA7191_REG_CTL3 + * - automatic field detection */ + 0x00, /* (0x00) SAA7191_REG_CTL4 */ + 0x2c, /* (0x2c) SAA7191_REG_CHCV - PAL nominal value */ + 0x00, /* unused */ + 0x00, /* unused */ + + /* 60 Hz signal timing */ + 0x34, /* (0x34) SAA7191_REG_HS6B */ + 0x0a, /* (0x0a) SAA7191_REG_HS6S */ + 0xf4, /* (0xf4) SAA7191_REG_HC6B */ + 0xce, /* (0xce) SAA7191_REG_HC6S */ + 0xf4, /* (0xf4) SAA7191_REG_HP6I */ +}; + +/* SAA7191 register handling */ + +static u8 saa7191_read_reg(struct v4l2_subdev *sd, u8 reg) +{ + return to_saa7191(sd)->reg[reg]; +} + +static int saa7191_read_status(struct v4l2_subdev *sd, u8 *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + ret = i2c_master_recv(client, value, 1); + if (ret < 0) { + printk(KERN_ERR "SAA7191: saa7191_read_status(): read failed\n"); + return ret; + } + + return 0; +} + + +static int saa7191_write_reg(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + to_saa7191(sd)->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* the first byte of data must be the first subaddress number (register) */ +static int saa7191_write_block(struct v4l2_subdev *sd, + u8 length, const u8 *data) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7191 *decoder = to_saa7191(sd); + int i; + int ret; + + for (i = 0; i < (length - 1); i++) { + decoder->reg[data[0] + i] = data[i + 1]; + } + + ret = i2c_master_send(client, data, length); + if (ret < 0) { + printk(KERN_ERR "SAA7191: saa7191_write_block(): " + "write failed\n"); + return ret; + } + + return 0; +} + +/* Helper functions */ + +static int saa7191_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa7191 *decoder = to_saa7191(sd); + u8 luma = saa7191_read_reg(sd, SAA7191_REG_LUMA); + u8 iock = saa7191_read_reg(sd, SAA7191_REG_IOCK); + int err; + + switch (input) { + case SAA7191_INPUT_COMPOSITE: /* Set Composite input */ + iock &= ~(SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW1 + | SAA7191_IOCK_GPSW2); + /* Chrominance trap active */ + luma &= ~SAA7191_LUMA_BYPS; + break; + case SAA7191_INPUT_SVIDEO: /* Set S-Video input */ + iock |= SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW2; + /* Chrominance trap bypassed */ + luma |= SAA7191_LUMA_BYPS; + break; + default: + return -EINVAL; + } + + err = saa7191_write_reg(sd, SAA7191_REG_LUMA, luma); + if (err) + return -EIO; + err = saa7191_write_reg(sd, SAA7191_REG_IOCK, iock); + if (err) + return -EIO; + + decoder->input = input; + + return 0; +} + +static int saa7191_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct saa7191 *decoder = to_saa7191(sd); + u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC); + u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3); + u8 chcv = saa7191_read_reg(sd, SAA7191_REG_CHCV); + int err; + + if (norm & V4L2_STD_PAL) { + stdc &= ~SAA7191_STDC_SECS; + ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL); + chcv = SAA7191_CHCV_PAL; + } else if (norm & V4L2_STD_NTSC) { + stdc &= ~SAA7191_STDC_SECS; + ctl3 &= ~SAA7191_CTL3_AUFD; + ctl3 |= SAA7191_CTL3_FSEL; + chcv = SAA7191_CHCV_NTSC; + } else if (norm & V4L2_STD_SECAM) { + stdc |= SAA7191_STDC_SECS; + ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL); + chcv = SAA7191_CHCV_PAL; + } else { + return -EINVAL; + } + + err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); + if (err) + return -EIO; + err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc); + if (err) + return -EIO; + err = saa7191_write_reg(sd, SAA7191_REG_CHCV, chcv); + if (err) + return -EIO; + + decoder->norm = norm; + + dprintk("ctl3: %02x stdc: %02x chcv: %02x\n", ctl3, + stdc, chcv); + dprintk("norm: %llx\n", norm); + + return 0; +} + +static int saa7191_wait_for_signal(struct v4l2_subdev *sd, u8 *status) +{ + int i = 0; + + dprintk("Checking for signal...\n"); + + for (i = 0; i < SAA7191_SYNC_COUNT; i++) { + if (saa7191_read_status(sd, status)) + return -EIO; + + if (((*status) & SAA7191_STATUS_HLCK) == 0) { + dprintk("Signal found\n"); + return 0; + } + + msleep(SAA7191_SYNC_DELAY); + } + + dprintk("No signal\n"); + + return -EBUSY; +} + +static int saa7191_querystd(struct v4l2_subdev *sd, v4l2_std_id *norm) +{ + struct saa7191 *decoder = to_saa7191(sd); + u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC); + u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3); + u8 status; + v4l2_std_id old_norm = decoder->norm; + int err = 0; + + dprintk("SAA7191 extended signal auto-detection...\n"); + + *norm = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM; + stdc &= ~SAA7191_STDC_SECS; + ctl3 &= ~(SAA7191_CTL3_FSEL); + + err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc); + if (err) { + err = -EIO; + goto out; + } + err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); + if (err) { + err = -EIO; + goto out; + } + + ctl3 |= SAA7191_CTL3_AUFD; + err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); + if (err) { + err = -EIO; + goto out; + } + + msleep(SAA7191_SYNC_DELAY); + + err = saa7191_wait_for_signal(sd, &status); + if (err) + goto out; + + if (status & SAA7191_STATUS_FIDT) { + /* 60Hz signal -> NTSC */ + dprintk("60Hz signal: NTSC\n"); + *norm = V4L2_STD_NTSC; + return 0; + } + + /* 50Hz signal */ + dprintk("50Hz signal: Trying PAL...\n"); + + /* try PAL first */ + err = saa7191_s_std(sd, V4L2_STD_PAL); + if (err) + goto out; + + msleep(SAA7191_SYNC_DELAY); + + err = saa7191_wait_for_signal(sd, &status); + if (err) + goto out; + + /* not 50Hz ? */ + if (status & SAA7191_STATUS_FIDT) { + dprintk("No 50Hz signal\n"); + saa7191_s_std(sd, old_norm); + return -EAGAIN; + } + + if (status & SAA7191_STATUS_CODE) { + dprintk("PAL\n"); + *norm = V4L2_STD_PAL; + return saa7191_s_std(sd, old_norm); + } + + dprintk("No color detected with PAL - Trying SECAM...\n"); + + /* no color detected ? -> try SECAM */ + err = saa7191_s_std(sd, V4L2_STD_SECAM); + if (err) + goto out; + + msleep(SAA7191_SYNC_DELAY); + + err = saa7191_wait_for_signal(sd, &status); + if (err) + goto out; + + /* not 50Hz ? */ + if (status & SAA7191_STATUS_FIDT) { + dprintk("No 50Hz signal\n"); + err = -EAGAIN; + goto out; + } + + if (status & SAA7191_STATUS_CODE) { + /* Color detected -> SECAM */ + dprintk("SECAM\n"); + *norm = V4L2_STD_SECAM; + return saa7191_s_std(sd, old_norm); + } + + dprintk("No color detected with SECAM - Going back to PAL.\n"); + +out: + return saa7191_s_std(sd, old_norm); +} + +static int saa7191_autodetect_norm(struct v4l2_subdev *sd) +{ + u8 status; + + dprintk("SAA7191 signal auto-detection...\n"); + + dprintk("Reading status...\n"); + + if (saa7191_read_status(sd, &status)) + return -EIO; + + dprintk("Checking for signal...\n"); + + /* no signal ? */ + if (status & SAA7191_STATUS_HLCK) { + dprintk("No signal\n"); + return -EBUSY; + } + + dprintk("Signal found\n"); + + if (status & SAA7191_STATUS_FIDT) { + /* 60hz signal -> NTSC */ + dprintk("NTSC\n"); + return saa7191_s_std(sd, V4L2_STD_NTSC); + } else { + /* 50hz signal -> PAL */ + dprintk("PAL\n"); + return saa7191_s_std(sd, V4L2_STD_PAL); + } +} + +static int saa7191_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + u8 reg; + int ret = 0; + + switch (ctrl->id) { + case SAA7191_CONTROL_BANDPASS: + case SAA7191_CONTROL_BANDPASS_WEIGHT: + case SAA7191_CONTROL_CORING: + reg = saa7191_read_reg(sd, SAA7191_REG_LUMA); + switch (ctrl->id) { + case SAA7191_CONTROL_BANDPASS: + ctrl->value = ((s32)reg & SAA7191_LUMA_BPSS_MASK) + >> SAA7191_LUMA_BPSS_SHIFT; + break; + case SAA7191_CONTROL_BANDPASS_WEIGHT: + ctrl->value = ((s32)reg & SAA7191_LUMA_APER_MASK) + >> SAA7191_LUMA_APER_SHIFT; + break; + case SAA7191_CONTROL_CORING: + ctrl->value = ((s32)reg & SAA7191_LUMA_CORI_MASK) + >> SAA7191_LUMA_CORI_SHIFT; + break; + } + break; + case SAA7191_CONTROL_FORCE_COLOUR: + case SAA7191_CONTROL_CHROMA_GAIN: + reg = saa7191_read_reg(sd, SAA7191_REG_GAIN); + if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR) + ctrl->value = ((s32)reg & SAA7191_GAIN_COLO) ? 1 : 0; + else + ctrl->value = ((s32)reg & SAA7191_GAIN_LFIS_MASK) + >> SAA7191_GAIN_LFIS_SHIFT; + break; + case V4L2_CID_HUE: + reg = saa7191_read_reg(sd, SAA7191_REG_HUEC); + if (reg < 0x80) + reg += 0x80; + else + reg -= 0x80; + ctrl->value = (s32)reg; + break; + case SAA7191_CONTROL_VTRC: + reg = saa7191_read_reg(sd, SAA7191_REG_STDC); + ctrl->value = ((s32)reg & SAA7191_STDC_VTRC) ? 1 : 0; + break; + case SAA7191_CONTROL_LUMA_DELAY: + reg = saa7191_read_reg(sd, SAA7191_REG_CTL3); + ctrl->value = ((s32)reg & SAA7191_CTL3_YDEL_MASK) + >> SAA7191_CTL3_YDEL_SHIFT; + if (ctrl->value >= 4) + ctrl->value -= 8; + break; + case SAA7191_CONTROL_VNR: + reg = saa7191_read_reg(sd, SAA7191_REG_CTL4); + ctrl->value = ((s32)reg & SAA7191_CTL4_VNOI_MASK) + >> SAA7191_CTL4_VNOI_SHIFT; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int saa7191_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + u8 reg; + int ret = 0; + + switch (ctrl->id) { + case SAA7191_CONTROL_BANDPASS: + case SAA7191_CONTROL_BANDPASS_WEIGHT: + case SAA7191_CONTROL_CORING: + reg = saa7191_read_reg(sd, SAA7191_REG_LUMA); + switch (ctrl->id) { + case SAA7191_CONTROL_BANDPASS: + reg &= ~SAA7191_LUMA_BPSS_MASK; + reg |= (ctrl->value << SAA7191_LUMA_BPSS_SHIFT) + & SAA7191_LUMA_BPSS_MASK; + break; + case SAA7191_CONTROL_BANDPASS_WEIGHT: + reg &= ~SAA7191_LUMA_APER_MASK; + reg |= (ctrl->value << SAA7191_LUMA_APER_SHIFT) + & SAA7191_LUMA_APER_MASK; + break; + case SAA7191_CONTROL_CORING: + reg &= ~SAA7191_LUMA_CORI_MASK; + reg |= (ctrl->value << SAA7191_LUMA_CORI_SHIFT) + & SAA7191_LUMA_CORI_MASK; + break; + } + ret = saa7191_write_reg(sd, SAA7191_REG_LUMA, reg); + break; + case SAA7191_CONTROL_FORCE_COLOUR: + case SAA7191_CONTROL_CHROMA_GAIN: + reg = saa7191_read_reg(sd, SAA7191_REG_GAIN); + if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR) { + if (ctrl->value) + reg |= SAA7191_GAIN_COLO; + else + reg &= ~SAA7191_GAIN_COLO; + } else { + reg &= ~SAA7191_GAIN_LFIS_MASK; + reg |= (ctrl->value << SAA7191_GAIN_LFIS_SHIFT) + & SAA7191_GAIN_LFIS_MASK; + } + ret = saa7191_write_reg(sd, SAA7191_REG_GAIN, reg); + break; + case V4L2_CID_HUE: + reg = ctrl->value & 0xff; + if (reg < 0x80) + reg += 0x80; + else + reg -= 0x80; + ret = saa7191_write_reg(sd, SAA7191_REG_HUEC, reg); + break; + case SAA7191_CONTROL_VTRC: + reg = saa7191_read_reg(sd, SAA7191_REG_STDC); + if (ctrl->value) + reg |= SAA7191_STDC_VTRC; + else + reg &= ~SAA7191_STDC_VTRC; + ret = saa7191_write_reg(sd, SAA7191_REG_STDC, reg); + break; + case SAA7191_CONTROL_LUMA_DELAY: { + s32 value = ctrl->value; + if (value < 0) + value += 8; + reg = saa7191_read_reg(sd, SAA7191_REG_CTL3); + reg &= ~SAA7191_CTL3_YDEL_MASK; + reg |= (value << SAA7191_CTL3_YDEL_SHIFT) + & SAA7191_CTL3_YDEL_MASK; + ret = saa7191_write_reg(sd, SAA7191_REG_CTL3, reg); + break; + } + case SAA7191_CONTROL_VNR: + reg = saa7191_read_reg(sd, SAA7191_REG_CTL4); + reg &= ~SAA7191_CTL4_VNOI_MASK; + reg |= (ctrl->value << SAA7191_CTL4_VNOI_SHIFT) + & SAA7191_CTL4_VNOI_MASK; + ret = saa7191_write_reg(sd, SAA7191_REG_CTL4, reg); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +/* I2C-interface */ + +static int saa7191_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + u8 status_reg; + int res = V4L2_IN_ST_NO_SIGNAL; + + if (saa7191_read_status(sd, &status_reg)) + return -EIO; + if ((status_reg & SAA7191_STATUS_HLCK) == 0) + res = 0; + if (!(status_reg & SAA7191_STATUS_CODE)) + res |= V4L2_IN_ST_NO_COLOR; + *status = res; + return 0; +} + + +static int saa7191_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7191, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa7191_core_ops = { + .g_chip_ident = saa7191_g_chip_ident, + .g_ctrl = saa7191_g_ctrl, + .s_ctrl = saa7191_s_ctrl, + .s_std = saa7191_s_std, +}; + +static const struct v4l2_subdev_video_ops saa7191_video_ops = { + .s_routing = saa7191_s_routing, + .querystd = saa7191_querystd, + .g_input_status = saa7191_g_input_status, +}; + +static const struct v4l2_subdev_ops saa7191_ops = { + .core = &saa7191_core_ops, + .video = &saa7191_video_ops, +}; + +static int saa7191_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err = 0; + struct saa7191 *decoder; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &saa7191_ops); + + err = saa7191_write_block(sd, sizeof(initseq), initseq); + if (err) { + printk(KERN_ERR "SAA7191 initialization failed\n"); + kfree(decoder); + return err; + } + + printk(KERN_INFO "SAA7191 initialized\n"); + + decoder->input = SAA7191_INPUT_COMPOSITE; + decoder->norm = V4L2_STD_PAL; + + err = saa7191_autodetect_norm(sd); + if (err && (err != -EBUSY)) + printk(KERN_ERR "SAA7191: Signal auto-detection failed\n"); + + return 0; +} + +static int saa7191_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_saa7191(sd)); + return 0; +} + +static const struct i2c_device_id saa7191_id[] = { + { "saa7191", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7191_id); + +static struct i2c_driver saa7191_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7191", + }, + .probe = saa7191_probe, + .remove = saa7191_remove, + .id_table = saa7191_id, +}; + +module_i2c_driver(saa7191_driver); diff --git a/drivers/media/i2c/saa7191.h b/drivers/media/i2c/saa7191.h new file mode 100644 index 00000000..803c74d6 --- /dev/null +++ b/drivers/media/i2c/saa7191.h @@ -0,0 +1,245 @@ +/* + * saa7191.h - Philips SAA7191 video decoder driver + * + * Copyright (C) 2003 Ladislav Michl + * Copyright (C) 2004,2005 Mikael Nousiainen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _SAA7191_H_ +#define _SAA7191_H_ + +/* Philips SAA7191 DMSD I2C bus address */ +#define SAA7191_ADDR 0x8a + +/* Register subaddresses. */ +#define SAA7191_REG_IDEL 0x00 +#define SAA7191_REG_HSYB 0x01 +#define SAA7191_REG_HSYS 0x02 +#define SAA7191_REG_HCLB 0x03 +#define SAA7191_REG_HCLS 0x04 +#define SAA7191_REG_HPHI 0x05 +#define SAA7191_REG_LUMA 0x06 +#define SAA7191_REG_HUEC 0x07 +#define SAA7191_REG_CKTQ 0x08 /* bits 3-7 */ +#define SAA7191_REG_CKTS 0x09 /* bits 3-7 */ +#define SAA7191_REG_PLSE 0x0a +#define SAA7191_REG_SESE 0x0b +#define SAA7191_REG_GAIN 0x0c +#define SAA7191_REG_STDC 0x0d +#define SAA7191_REG_IOCK 0x0e +#define SAA7191_REG_CTL3 0x0f +#define SAA7191_REG_CTL4 0x10 +#define SAA7191_REG_CHCV 0x11 +#define SAA7191_REG_HS6B 0x14 +#define SAA7191_REG_HS6S 0x15 +#define SAA7191_REG_HC6B 0x16 +#define SAA7191_REG_HC6S 0x17 +#define SAA7191_REG_HP6I 0x18 +#define SAA7191_REG_STATUS 0xff /* not really a subaddress */ + +/* Status Register definitions */ +#define SAA7191_STATUS_CODE 0x01 /* color detected flag */ +#define SAA7191_STATUS_FIDT 0x20 /* signal type 50/60 Hz */ +#define SAA7191_STATUS_HLCK 0x40 /* PLL unlocked(1)/locked(0) */ +#define SAA7191_STATUS_STTC 0x80 /* tv/vtr time constant */ + +/* Luminance Control Register definitions */ +/* input mode select bit: + * 0=CVBS (chrominance trap active), 1=S-Video (trap bypassed) */ +#define SAA7191_LUMA_BYPS 0x80 +/* pre-filter (only when chrominance trap is active) */ +#define SAA7191_LUMA_PREF 0x40 +/* aperture bandpass to select different characteristics with maximums + * (bits 4-5) */ +#define SAA7191_LUMA_BPSS_MASK 0x30 +#define SAA7191_LUMA_BPSS_SHIFT 4 +#define SAA7191_LUMA_BPSS_3 0x30 +#define SAA7191_LUMA_BPSS_2 0x20 +#define SAA7191_LUMA_BPSS_1 0x10 +#define SAA7191_LUMA_BPSS_0 0x00 +/* coring range for high frequency components according to 8-bit luminance + * (bits 2-3) + * 0=coring off, n= (+-)n LSB */ +#define SAA7191_LUMA_CORI_MASK 0x0c +#define SAA7191_LUMA_CORI_SHIFT 2 +#define SAA7191_LUMA_CORI_3 0x0c +#define SAA7191_LUMA_CORI_2 0x08 +#define SAA7191_LUMA_CORI_1 0x04 +#define SAA7191_LUMA_CORI_0 0x00 +/* aperture bandpass filter weights high frequency components of luminance + * signal (bits 0-1) + * 0=factor 0, 1=0.25, 2=0.5, 3=1 */ +#define SAA7191_LUMA_APER_MASK 0x03 +#define SAA7191_LUMA_APER_SHIFT 0 +#define SAA7191_LUMA_APER_3 0x03 +#define SAA7191_LUMA_APER_2 0x02 +#define SAA7191_LUMA_APER_1 0x01 +#define SAA7191_LUMA_APER_0 0x00 + +/* Chrominance Gain Control Settings Register definitions */ +/* colour on: 0=automatic colour-killer enabled, 1=forced colour on */ +#define SAA7191_GAIN_COLO 0x80 +/* chrominance gain control (AGC filter) + * 0=loop filter time constant slow, 1=medium, 2=fast, 3=actual gain */ +#define SAA7191_GAIN_LFIS_MASK 0x60 +#define SAA7191_GAIN_LFIS_SHIFT 5 +#define SAA7191_GAIN_LFIS_3 0x60 +#define SAA7191_GAIN_LFIS_2 0x40 +#define SAA7191_GAIN_LFIS_1 0x20 +#define SAA7191_GAIN_LFIS_0 0x00 + +/* Standard/Mode Control Register definitions */ +/* tv/vtr mode bit: 0=TV mode (slow time constant), + * 1=VTR mode (fast time constant) */ +#define SAA7191_STDC_VTRC 0x80 +/* SAA7191B-specific functions enable (RTCO, ODD and GPSW0 outputs) + * 0=outputs set to high-impedance (circuit equals SAA7191), 1=enabled */ +#define SAA7191_STDC_NFEN 0x08 +/* HREF generation: 0=like SAA7191, 1=HREF is 8xLLC2 clocks earlier */ +#define SAA7191_STDC_HRMV 0x04 +/* general purpose switch 0 + * (not used with VINO afaik) */ +#define SAA7191_STDC_GPSW0 0x02 +/* SECAM mode bit: 0=other standards, 1=SECAM */ +#define SAA7191_STDC_SECS 0x01 + +/* I/O and Clock Control Register definitions */ +/* horizontal clock PLL: 0=PLL closed, + * 1=PLL circuit open and horizontal freq fixed */ +#define SAA7191_IOCK_HPLL 0x80 +/* colour-difference output enable (outputs UV0-UV7) */ +#define SAA7191_IOCK_OEDC 0x40 +/* H-sync output enable */ +#define SAA7191_IOCK_OEHS 0x20 +/* V-sync output enable */ +#define SAA7191_IOCK_OEVS 0x10 +/* luminance output enable (outputs Y0-Y7) */ +#define SAA7191_IOCK_OEDY 0x08 +/* S-VHS bit (chrominance from CVBS or from chrominance input): + * 0=controlled by BYPS-bit, 1=from chrominance input */ +#define SAA7191_IOCK_CHRS 0x04 +/* general purpose switch 2 + * VINO-specific: 0=used with CVBS, 1=used with S-Video */ +#define SAA7191_IOCK_GPSW2 0x02 +/* general purpose switch 1 */ +/* VINO-specific: 0=always, 1=not used!*/ +#define SAA7191_IOCK_GPSW1 0x01 + +/* Miscellaneous Control #1 Register definitions */ +/* automatic field detection (50/60Hz standard) */ +#define SAA7191_CTL3_AUFD 0x80 +/* field select: (if AUFD=0) + * 0=50Hz (625 lines), 1=60Hz (525 lines) */ +#define SAA7191_CTL3_FSEL 0x40 +/* SECAM cross-colour reduction enable */ +#define SAA7191_CTL3_SXCR 0x20 +/* sync and clamping pulse enable (HCL and HSY outputs) */ +#define SAA7191_CTL3_SCEN 0x10 +/* output format: 0=4:1:1, 1=4:2:2 (4:2:2 for VINO) */ +#define SAA7191_CTL3_OFTS 0x08 +/* luminance delay compensation + * 0=0*2/LLC, 1=+1*2/LLC, 2=+2*2/LLC, 3=+3*2/LLC, + * 4=-4*2/LLC, 5=-3*2/LLC, 6=-2*2/LLC, 7=-1*2/LLC + * step size = 2/LLC = 67.8ns for 50Hz, 81.5ns for 60Hz */ +#define SAA7191_CTL3_YDEL_MASK 0x07 +#define SAA7191_CTL3_YDEL_SHIFT 0 +#define SAA7191_CTL3_YDEL2 0x04 +#define SAA7191_CTL3_YDEL1 0x02 +#define SAA7191_CTL3_YDEL0 0x01 + +/* Miscellaneous Control #2 Register definitions */ +/* select HREF position + * 0=normal, HREF is matched to YUV output port, + * 1=HREF is matched to CVBS input port */ +#define SAA7191_CTL4_HRFS 0x04 +/* vertical noise reduction + * 0=normal, 1=searching window, 2=auto-deflection, 3=reduction bypassed */ +#define SAA7191_CTL4_VNOI_MASK 0x03 +#define SAA7191_CTL4_VNOI_SHIFT 0 +#define SAA7191_CTL4_VNOI_3 0x03 +#define SAA7191_CTL4_VNOI_2 0x02 +#define SAA7191_CTL4_VNOI_1 0x01 +#define SAA7191_CTL4_VNOI_0 0x00 + +/* Chrominance Gain Control Register definitions + * - for QAM-modulated input signals, effects output amplitude + * (SECAM gain fixed) + * (nominal values for UV CCIR level) */ +#define SAA7191_CHCV_NTSC 0x2c +#define SAA7191_CHCV_PAL 0x59 + +/* Driver interface definitions */ +#define SAA7191_INPUT_COMPOSITE 0 +#define SAA7191_INPUT_SVIDEO 1 + +#define SAA7191_NORM_PAL 1 +#define SAA7191_NORM_NTSC 2 +#define SAA7191_NORM_SECAM 3 + +struct saa7191_status { + /* 0=no signal, 1=signal detected */ + int signal; + /* 0=50hz (pal) signal, 1=60hz (ntsc) signal */ + int signal_60hz; + /* 0=no color detected, 1=color detected */ + int color; + + /* current SAA7191_INPUT_ */ + int input; + /* current SAA7191_NORM_ */ + int norm; +}; + +#define SAA7191_BANDPASS_MIN 0x00 +#define SAA7191_BANDPASS_MAX 0x03 +#define SAA7191_BANDPASS_DEFAULT 0x00 + +#define SAA7191_BANDPASS_WEIGHT_MIN 0x00 +#define SAA7191_BANDPASS_WEIGHT_MAX 0x03 +#define SAA7191_BANDPASS_WEIGHT_DEFAULT 0x01 + +#define SAA7191_CORING_MIN 0x00 +#define SAA7191_CORING_MAX 0x03 +#define SAA7191_CORING_DEFAULT 0x00 + +#define SAA7191_HUE_MIN 0x00 +#define SAA7191_HUE_MAX 0xff +#define SAA7191_HUE_DEFAULT 0x80 + +#define SAA7191_VTRC_MIN 0x00 +#define SAA7191_VTRC_MAX 0x01 +#define SAA7191_VTRC_DEFAULT 0x00 + +#define SAA7191_FORCE_COLOUR_MIN 0x00 +#define SAA7191_FORCE_COLOUR_MAX 0x01 +#define SAA7191_FORCE_COLOUR_DEFAULT 0x00 + +#define SAA7191_CHROMA_GAIN_MIN 0x00 +#define SAA7191_CHROMA_GAIN_MAX 0x03 +#define SAA7191_CHROMA_GAIN_DEFAULT 0x00 + +#define SAA7191_LUMA_DELAY_MIN -0x04 +#define SAA7191_LUMA_DELAY_MAX 0x03 +#define SAA7191_LUMA_DELAY_DEFAULT 0x01 + +#define SAA7191_VNR_MIN 0x00 +#define SAA7191_VNR_MAX 0x03 +#define SAA7191_VNR_DEFAULT 0x00 + +#define SAA7191_CONTROL_BANDPASS (V4L2_CID_PRIVATE_BASE + 0) +#define SAA7191_CONTROL_BANDPASS_WEIGHT (V4L2_CID_PRIVATE_BASE + 1) +#define SAA7191_CONTROL_CORING (V4L2_CID_PRIVATE_BASE + 2) +#define SAA7191_CONTROL_FORCE_COLOUR (V4L2_CID_PRIVATE_BASE + 3) +#define SAA7191_CONTROL_CHROMA_GAIN (V4L2_CID_PRIVATE_BASE + 4) +#define SAA7191_CONTROL_VTRC (V4L2_CID_PRIVATE_BASE + 5) +#define SAA7191_CONTROL_LUMA_DELAY (V4L2_CID_PRIVATE_BASE + 6) +#define SAA7191_CONTROL_VNR (V4L2_CID_PRIVATE_BASE + 7) + +#define DECODER_SAA7191_GET_STATUS _IOR('d', 195, struct saa7191_status) +#define DECODER_SAA7191_SET_NORM _IOW('d', 196, int) + +#endif diff --git a/drivers/media/i2c/smiapp-pll.c b/drivers/media/i2c/smiapp-pll.c new file mode 100644 index 00000000..d8d5da7c --- /dev/null +++ b/drivers/media/i2c/smiapp-pll.c @@ -0,0 +1,443 @@ +/* + * drivers/media/i2c/smiapp-pll.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include + +#include "smiapp-pll.h" + +/* Return an even number or one. */ +static inline uint32_t clk_div_even(uint32_t a) +{ + return max_t(uint32_t, 1, a & ~1); +} + +/* Return an even number or one. */ +static inline uint32_t clk_div_even_up(uint32_t a) +{ + if (a == 1) + return 1; + return (a + 1) & ~1; +} + +static inline uint32_t is_one_or_even(uint32_t a) +{ + if (a == 1) + return 1; + if (a & 1) + return 0; + + return 1; +} + +static int bounds_check(struct device *dev, uint32_t val, + uint32_t min, uint32_t max, char *str) +{ + if (val >= min && val <= max) + return 0; + + dev_dbg(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max); + + return -EINVAL; +} + +static void print_pll(struct device *dev, struct smiapp_pll *pll) +{ + dev_dbg(dev, "pre_pll_clk_div\t%d\n", pll->pre_pll_clk_div); + dev_dbg(dev, "pll_multiplier \t%d\n", pll->pll_multiplier); + if (pll->flags != SMIAPP_PLL_FLAG_NO_OP_CLOCKS) { + dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div); + dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div); + } + dev_dbg(dev, "vt_sys_clk_div \t%d\n", pll->vt_sys_clk_div); + dev_dbg(dev, "vt_pix_clk_div \t%d\n", pll->vt_pix_clk_div); + + dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz); + dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz); + dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz); + if (pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS) { + dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n", + pll->op_sys_clk_freq_hz); + dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n", + pll->op_pix_clk_freq_hz); + } + dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz); + dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz); +} + +static int __smiapp_pll_calculate(struct device *dev, + const struct smiapp_pll_limits *limits, + struct smiapp_pll *pll, uint32_t mul, + uint32_t div, uint32_t lane_op_clock_ratio) +{ + uint32_t sys_div; + uint32_t best_pix_div = INT_MAX >> 1; + uint32_t vt_op_binning_div; + uint32_t more_mul_min, more_mul_max; + uint32_t more_mul_factor; + uint32_t min_vt_div, max_vt_div, vt_div; + uint32_t min_sys_div, max_sys_div; + unsigned int i; + int rval; + + /* + * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be + * too high. + */ + dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div); + + /* Don't go above max pll multiplier. */ + more_mul_max = limits->max_pll_multiplier / mul; + dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n", + more_mul_max); + /* Don't go above max pll op frequency. */ + more_mul_max = + min_t(uint32_t, + more_mul_max, + limits->max_pll_op_freq_hz + / (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul)); + dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n", + more_mul_max); + /* Don't go above the division capability of op sys clock divider. */ + more_mul_max = min(more_mul_max, + limits->op.max_sys_clk_div * pll->pre_pll_clk_div + / div); + dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n", + more_mul_max); + /* Ensure we won't go above min_pll_multiplier. */ + more_mul_max = min(more_mul_max, + DIV_ROUND_UP(limits->max_pll_multiplier, mul)); + dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n", + more_mul_max); + + /* Ensure we won't go below min_pll_op_freq_hz. */ + more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz, + pll->ext_clk_freq_hz / pll->pre_pll_clk_div + * mul); + dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n", + more_mul_min); + /* Ensure we won't go below min_pll_multiplier. */ + more_mul_min = max(more_mul_min, + DIV_ROUND_UP(limits->min_pll_multiplier, mul)); + dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n", + more_mul_min); + + if (more_mul_min > more_mul_max) { + dev_dbg(dev, + "unable to compute more_mul_min and more_mul_max\n"); + return -EINVAL; + } + + more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div; + dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor); + more_mul_factor = lcm(more_mul_factor, limits->op.min_sys_clk_div); + dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n", + more_mul_factor); + i = roundup(more_mul_min, more_mul_factor); + if (!is_one_or_even(i)) + i <<= 1; + + dev_dbg(dev, "final more_mul: %d\n", i); + if (i > more_mul_max) { + dev_dbg(dev, "final more_mul is bad, max %d\n", more_mul_max); + return -EINVAL; + } + + pll->pll_multiplier = mul * i; + pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div; + dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div); + + pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz + / pll->pre_pll_clk_div; + + pll->pll_op_clk_freq_hz = pll->pll_ip_clk_freq_hz + * pll->pll_multiplier; + + /* Derive pll_op_clk_freq_hz. */ + pll->op_sys_clk_freq_hz = + pll->pll_op_clk_freq_hz / pll->op_sys_clk_div; + + pll->op_pix_clk_div = pll->bits_per_pixel; + dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div); + + pll->op_pix_clk_freq_hz = + pll->op_sys_clk_freq_hz / pll->op_pix_clk_div; + + /* + * Some sensors perform analogue binning and some do this + * digitally. The ones doing this digitally can be roughly be + * found out using this formula. The ones doing this digitally + * should run at higher clock rate, so smaller divisor is used + * on video timing side. + */ + if (limits->min_line_length_pck_bin > limits->min_line_length_pck + / pll->binning_horizontal) + vt_op_binning_div = pll->binning_horizontal; + else + vt_op_binning_div = 1; + dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div); + + /* + * Profile 2 supports vt_pix_clk_div E [4, 10] + * + * Horizontal binning can be used as a base for difference in + * divisors. One must make sure that horizontal blanking is + * enough to accommodate the CSI-2 sync codes. + * + * Take scaling factor into account as well. + * + * Find absolute limits for the factor of vt divider. + */ + dev_dbg(dev, "scale_m: %d\n", pll->scale_m); + min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div + * pll->scale_n, + lane_op_clock_ratio * vt_op_binning_div + * pll->scale_m); + + /* Find smallest and biggest allowed vt divisor. */ + dev_dbg(dev, "min_vt_div: %d\n", min_vt_div); + min_vt_div = max(min_vt_div, + DIV_ROUND_UP(pll->pll_op_clk_freq_hz, + limits->vt.max_pix_clk_freq_hz)); + dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n", + min_vt_div); + min_vt_div = max_t(uint32_t, min_vt_div, + limits->vt.min_pix_clk_div + * limits->vt.min_sys_clk_div); + dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div); + + max_vt_div = limits->vt.max_sys_clk_div * limits->vt.max_pix_clk_div; + dev_dbg(dev, "max_vt_div: %d\n", max_vt_div); + max_vt_div = min(max_vt_div, + DIV_ROUND_UP(pll->pll_op_clk_freq_hz, + limits->vt.min_pix_clk_freq_hz)); + dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n", + max_vt_div); + + /* + * Find limitsits for sys_clk_div. Not all values are possible + * with all values of pix_clk_div. + */ + min_sys_div = limits->vt.min_sys_clk_div; + dev_dbg(dev, "min_sys_div: %d\n", min_sys_div); + min_sys_div = max(min_sys_div, + DIV_ROUND_UP(min_vt_div, + limits->vt.max_pix_clk_div)); + dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div); + min_sys_div = max(min_sys_div, + pll->pll_op_clk_freq_hz + / limits->vt.max_sys_clk_freq_hz); + dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div); + min_sys_div = clk_div_even_up(min_sys_div); + dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div); + + max_sys_div = limits->vt.max_sys_clk_div; + dev_dbg(dev, "max_sys_div: %d\n", max_sys_div); + max_sys_div = min(max_sys_div, + DIV_ROUND_UP(max_vt_div, + limits->vt.min_pix_clk_div)); + dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div); + max_sys_div = min(max_sys_div, + DIV_ROUND_UP(pll->pll_op_clk_freq_hz, + limits->vt.min_pix_clk_freq_hz)); + dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div); + + /* + * Find pix_div such that a legal pix_div * sys_div results + * into a value which is not smaller than div, the desired + * divisor. + */ + for (vt_div = min_vt_div; vt_div <= max_vt_div; + vt_div += 2 - (vt_div & 1)) { + for (sys_div = min_sys_div; + sys_div <= max_sys_div; + sys_div += 2 - (sys_div & 1)) { + uint16_t pix_div = DIV_ROUND_UP(vt_div, sys_div); + + if (pix_div < limits->vt.min_pix_clk_div + || pix_div > limits->vt.max_pix_clk_div) { + dev_dbg(dev, + "pix_div %d too small or too big (%d--%d)\n", + pix_div, + limits->vt.min_pix_clk_div, + limits->vt.max_pix_clk_div); + continue; + } + + /* Check if this one is better. */ + if (pix_div * sys_div + <= roundup(min_vt_div, best_pix_div)) + best_pix_div = pix_div; + } + if (best_pix_div < INT_MAX >> 1) + break; + } + + pll->vt_sys_clk_div = DIV_ROUND_UP(min_vt_div, best_pix_div); + pll->vt_pix_clk_div = best_pix_div; + + pll->vt_sys_clk_freq_hz = + pll->pll_op_clk_freq_hz / pll->vt_sys_clk_div; + pll->vt_pix_clk_freq_hz = + pll->vt_sys_clk_freq_hz / pll->vt_pix_clk_div; + + pll->pixel_rate_csi = + pll->op_pix_clk_freq_hz * lane_op_clock_ratio; + + rval = bounds_check(dev, pll->pll_ip_clk_freq_hz, + limits->min_pll_ip_freq_hz, + limits->max_pll_ip_freq_hz, + "pll_ip_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->pll_multiplier, + limits->min_pll_multiplier, limits->max_pll_multiplier, + "pll_multiplier"); + if (!rval) + rval = bounds_check( + dev, pll->pll_op_clk_freq_hz, + limits->min_pll_op_freq_hz, limits->max_pll_op_freq_hz, + "pll_op_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->op_sys_clk_div, + limits->op.min_sys_clk_div, limits->op.max_sys_clk_div, + "op_sys_clk_div"); + if (!rval) + rval = bounds_check( + dev, pll->op_pix_clk_div, + limits->op.min_pix_clk_div, limits->op.max_pix_clk_div, + "op_pix_clk_div"); + if (!rval) + rval = bounds_check( + dev, pll->op_sys_clk_freq_hz, + limits->op.min_sys_clk_freq_hz, + limits->op.max_sys_clk_freq_hz, + "op_sys_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->op_pix_clk_freq_hz, + limits->op.min_pix_clk_freq_hz, + limits->op.max_pix_clk_freq_hz, + "op_pix_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->vt_sys_clk_freq_hz, + limits->vt.min_sys_clk_freq_hz, + limits->vt.max_sys_clk_freq_hz, + "vt_sys_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->vt_pix_clk_freq_hz, + limits->vt.min_pix_clk_freq_hz, + limits->vt.max_pix_clk_freq_hz, + "vt_pix_clk_freq_hz"); + + return rval; +} + +int smiapp_pll_calculate(struct device *dev, + const struct smiapp_pll_limits *limits, + struct smiapp_pll *pll) +{ + uint16_t min_pre_pll_clk_div; + uint16_t max_pre_pll_clk_div; + uint32_t lane_op_clock_ratio; + uint32_t mul, div; + unsigned int i; + int rval = -EINVAL; + + if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE) + lane_op_clock_ratio = pll->csi2.lanes; + else + lane_op_clock_ratio = 1; + dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio); + + dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal, + pll->binning_vertical); + + switch (pll->bus_type) { + case SMIAPP_PLL_BUS_TYPE_CSI2: + /* CSI transfers 2 bits per clock per lane; thus times 2 */ + pll->pll_op_clk_freq_hz = pll->link_freq * 2 + * (pll->csi2.lanes / lane_op_clock_ratio); + break; + case SMIAPP_PLL_BUS_TYPE_PARALLEL: + pll->pll_op_clk_freq_hz = pll->link_freq * pll->bits_per_pixel + / DIV_ROUND_UP(pll->bits_per_pixel, + pll->parallel.bus_width); + break; + default: + return -EINVAL; + } + + /* Figure out limits for pre-pll divider based on extclk */ + dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n", + limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div); + max_pre_pll_clk_div = + min_t(uint16_t, limits->max_pre_pll_clk_div, + clk_div_even(pll->ext_clk_freq_hz / + limits->min_pll_ip_freq_hz)); + min_pre_pll_clk_div = + max_t(uint16_t, limits->min_pre_pll_clk_div, + clk_div_even_up( + DIV_ROUND_UP(pll->ext_clk_freq_hz, + limits->max_pll_ip_freq_hz))); + dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n", + min_pre_pll_clk_div, max_pre_pll_clk_div); + + i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz); + mul = div_u64(pll->pll_op_clk_freq_hz, i); + div = pll->ext_clk_freq_hz / i; + dev_dbg(dev, "mul %d / div %d\n", mul, div); + + min_pre_pll_clk_div = + max_t(uint16_t, min_pre_pll_clk_div, + clk_div_even_up( + DIV_ROUND_UP(mul * pll->ext_clk_freq_hz, + limits->max_pll_op_freq_hz))); + dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n", + min_pre_pll_clk_div, max_pre_pll_clk_div); + + for (pll->pre_pll_clk_div = min_pre_pll_clk_div; + pll->pre_pll_clk_div <= max_pre_pll_clk_div; + pll->pre_pll_clk_div += 2 - (pll->pre_pll_clk_div & 1)) { + rval = __smiapp_pll_calculate(dev, limits, pll, mul, div, + lane_op_clock_ratio); + if (rval) + continue; + + print_pll(dev, pll); + return 0; + } + + dev_info(dev, "unable to compute pre_pll divisor\n"); + return rval; +} +EXPORT_SYMBOL_GPL(smiapp_pll_calculate); + +MODULE_AUTHOR("Sakari Ailus "); +MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/smiapp-pll.h b/drivers/media/i2c/smiapp-pll.h new file mode 100644 index 00000000..a4a64983 --- /dev/null +++ b/drivers/media/i2c/smiapp-pll.h @@ -0,0 +1,114 @@ +/* + * drivers/media/i2c/smiapp-pll.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef SMIAPP_PLL_H +#define SMIAPP_PLL_H + +#include + +/* CSI-2 or CCP-2 */ +#define SMIAPP_PLL_BUS_TYPE_CSI2 0x00 +#define SMIAPP_PLL_BUS_TYPE_PARALLEL 0x01 + +/* op pix clock is for all lanes in total normally */ +#define SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0) +#define SMIAPP_PLL_FLAG_NO_OP_CLOCKS (1 << 1) + +struct smiapp_pll { + /* input values */ + uint8_t bus_type; + union { + struct { + uint8_t lanes; + } csi2; + struct { + uint8_t bus_width; + } parallel; + }; + uint8_t flags; + uint8_t binning_horizontal; + uint8_t binning_vertical; + uint8_t scale_m; + uint8_t scale_n; + uint8_t bits_per_pixel; + uint32_t link_freq; + + /* output values */ + uint16_t pre_pll_clk_div; + uint16_t pll_multiplier; + uint16_t op_sys_clk_div; + uint16_t op_pix_clk_div; + uint16_t vt_sys_clk_div; + uint16_t vt_pix_clk_div; + + uint32_t ext_clk_freq_hz; + uint32_t pll_ip_clk_freq_hz; + uint32_t pll_op_clk_freq_hz; + uint32_t op_sys_clk_freq_hz; + uint32_t op_pix_clk_freq_hz; + uint32_t vt_sys_clk_freq_hz; + uint32_t vt_pix_clk_freq_hz; + + uint32_t pixel_rate_csi; +}; + +struct smiapp_pll_branch_limits { + uint16_t min_sys_clk_div; + uint16_t max_sys_clk_div; + uint32_t min_sys_clk_freq_hz; + uint32_t max_sys_clk_freq_hz; + uint16_t min_pix_clk_div; + uint16_t max_pix_clk_div; + uint32_t min_pix_clk_freq_hz; + uint32_t max_pix_clk_freq_hz; +}; + +struct smiapp_pll_limits { + /* Strict PLL limits */ + uint32_t min_ext_clk_freq_hz; + uint32_t max_ext_clk_freq_hz; + uint16_t min_pre_pll_clk_div; + uint16_t max_pre_pll_clk_div; + uint32_t min_pll_ip_freq_hz; + uint32_t max_pll_ip_freq_hz; + uint16_t min_pll_multiplier; + uint16_t max_pll_multiplier; + uint32_t min_pll_op_freq_hz; + uint32_t max_pll_op_freq_hz; + + struct smiapp_pll_branch_limits vt; + struct smiapp_pll_branch_limits op; + + /* Other relevant limits */ + uint32_t min_line_length_pck_bin; + uint32_t min_line_length_pck; +}; + +struct device; + +int smiapp_pll_calculate(struct device *dev, + const struct smiapp_pll_limits *limits, + struct smiapp_pll *pll); + +#endif /* SMIAPP_PLL_H */ diff --git a/drivers/media/i2c/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig new file mode 100644 index 00000000..3149cda1 --- /dev/null +++ b/drivers/media/i2c/smiapp/Kconfig @@ -0,0 +1,7 @@ +config VIDEO_SMIAPP + tristate "SMIA++/SMIA sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_SMIAPP_PLL + ---help--- + This is a generic driver for SMIA++/SMIA camera modules. diff --git a/drivers/media/i2c/smiapp/Makefile b/drivers/media/i2c/smiapp/Makefile new file mode 100644 index 00000000..f45a003c --- /dev/null +++ b/drivers/media/i2c/smiapp/Makefile @@ -0,0 +1,5 @@ +smiapp-objs += smiapp-core.o smiapp-regs.o \ + smiapp-quirk.o smiapp-limits.o +obj-$(CONFIG_VIDEO_SMIAPP) += smiapp.o + +ccflags-y += -Idrivers/media/i2c diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c new file mode 100644 index 00000000..b280216d --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -0,0 +1,2892 @@ +/* + * drivers/media/i2c/smiapp/smiapp-core.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2010--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * Based on smiapp driver by Vimarsh Zutshi + * Based on jt8ev1.c by Vimarsh Zutshi + * Based on smia-sensor.c by Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "smiapp.h" + +#define SMIAPP_ALIGN_DIM(dim, flags) \ + ((flags) & V4L2_SEL_FLAG_GE \ + ? ALIGN((dim), 2) \ + : (dim) & ~1) + +/* + * smiapp_module_idents - supported camera modules + */ +static const struct smiapp_module_ident smiapp_module_idents[] = { + SMIAPP_IDENT_L(0x01, 0x022b, -1, "vs6555"), + SMIAPP_IDENT_L(0x01, 0x022e, -1, "vw6558"), + SMIAPP_IDENT_L(0x07, 0x7698, -1, "ovm7698"), + SMIAPP_IDENT_L(0x0b, 0x4242, -1, "smiapp-003"), + SMIAPP_IDENT_L(0x0c, 0x208a, -1, "tcm8330md"), + SMIAPP_IDENT_LQ(0x0c, 0x2134, -1, "tcm8500md", &smiapp_tcm8500md_quirk), + SMIAPP_IDENT_L(0x0c, 0x213e, -1, "et8en2"), + SMIAPP_IDENT_L(0x0c, 0x2184, -1, "tcm8580md"), + SMIAPP_IDENT_LQ(0x0c, 0x560f, -1, "jt8ew9", &smiapp_jt8ew9_quirk), + SMIAPP_IDENT_LQ(0x10, 0x4141, -1, "jt8ev1", &smiapp_jt8ev1_quirk), + SMIAPP_IDENT_LQ(0x10, 0x4241, -1, "imx125es", &smiapp_imx125es_quirk), +}; + +/* + * + * Dynamic Capability Identification + * + */ + +static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc; + unsigned int i; + int rval; + int line_count = 0; + int embedded_start = -1, embedded_end = -1; + int image_start = 0; + + rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE, + &fmt_model_type); + if (rval) + return rval; + + rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE, + &fmt_model_subtype); + if (rval) + return rval; + + ncol_desc = (fmt_model_subtype + & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK) + >> SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT; + nrow_desc = fmt_model_subtype + & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK; + + dev_dbg(&client->dev, "format_model_type %s\n", + fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE + ? "2 byte" : + fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE + ? "4 byte" : "is simply bad"); + + for (i = 0; i < ncol_desc + nrow_desc; i++) { + u32 desc; + u32 pixelcode; + u32 pixels; + char *which; + char *what; + + if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) { + rval = smiapp_read( + sensor, + SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i), + &desc); + if (rval) + return rval; + + pixelcode = + (desc + & SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK) + >> SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT; + pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK; + } else if (fmt_model_type + == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) { + rval = smiapp_read( + sensor, + SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i), + &desc); + if (rval) + return rval; + + pixelcode = + (desc + & SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK) + >> SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT; + pixels = desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK; + } else { + dev_dbg(&client->dev, + "invalid frame format model type %d\n", + fmt_model_type); + return -EINVAL; + } + + if (i < ncol_desc) + which = "columns"; + else + which = "rows"; + + switch (pixelcode) { + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED: + what = "embedded"; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY: + what = "dummy"; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK: + what = "black"; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK: + what = "dark"; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE: + what = "visible"; + break; + default: + what = "invalid"; + dev_dbg(&client->dev, "pixelcode %d\n", pixelcode); + break; + } + + dev_dbg(&client->dev, "%s pixels: %d %s\n", + what, pixels, which); + + if (i < ncol_desc) + continue; + + /* Handle row descriptors */ + if (pixelcode + == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED) { + embedded_start = line_count; + } else { + if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE + || pixels >= sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES] / 2) + image_start = line_count; + if (embedded_start != -1 && embedded_end == -1) + embedded_end = line_count; + } + line_count += pixels; + } + + if (embedded_start == -1 || embedded_end == -1) { + embedded_start = 0; + embedded_end = 0; + } + + dev_dbg(&client->dev, "embedded data from lines %d to %d\n", + embedded_start, embedded_end); + dev_dbg(&client->dev, "image data starts at line %d\n", image_start); + + return 0; +} + +static int smiapp_pll_configure(struct smiapp_sensor *sensor) +{ + struct smiapp_pll *pll = &sensor->pll; + int rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_VT_PIX_CLK_DIV, pll->vt_pix_clk_div); + if (rval < 0) + return rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_VT_SYS_CLK_DIV, pll->vt_sys_clk_div); + if (rval < 0) + return rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_PRE_PLL_CLK_DIV, pll->pre_pll_clk_div); + if (rval < 0) + return rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_PLL_MULTIPLIER, pll->pll_multiplier); + if (rval < 0) + return rval; + + /* Lane op clock ratio does not apply here. */ + rval = smiapp_write( + sensor, SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS, + DIV_ROUND_UP(pll->op_sys_clk_freq_hz, 1000000 / 256 / 256)); + if (rval < 0 || sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) + return rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_OP_PIX_CLK_DIV, pll->op_pix_clk_div); + if (rval < 0) + return rval; + + return smiapp_write( + sensor, SMIAPP_REG_U16_OP_SYS_CLK_DIV, pll->op_sys_clk_div); +} + +static int smiapp_pll_update(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + struct smiapp_pll_limits lim = { + .min_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV], + .max_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV], + .min_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ], + .max_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ], + .min_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MIN_PLL_MULTIPLIER], + .max_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MAX_PLL_MULTIPLIER], + .min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ], + .max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ], + + .op.min_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV], + .op.max_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV], + .op.min_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV], + .op.max_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV], + .op.min_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ], + .op.max_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ], + .op.min_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ], + .op.max_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ], + + .vt.min_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV], + .vt.max_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV], + .vt.min_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV], + .vt.max_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV], + .vt.min_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ], + .vt.max_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ], + .vt.min_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ], + .vt.max_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ], + + .min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN], + .min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK], + }; + struct smiapp_pll *pll = &sensor->pll; + int rval; + + if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) { + /* + * Fill in operational clock divisors limits from the + * video timing ones. On profile 0 sensors the + * requirements regarding them are essentially the + * same as on VT ones. + */ + lim.op = lim.vt; + } + + pll->binning_horizontal = sensor->binning_horizontal; + pll->binning_vertical = sensor->binning_vertical; + pll->link_freq = + sensor->link_freq->qmenu_int[sensor->link_freq->val]; + pll->scale_m = sensor->scale_m; + pll->bits_per_pixel = sensor->csi_format->compressed; + + rval = smiapp_pll_calculate(&client->dev, &lim, pll); + if (rval < 0) + return rval; + + sensor->pixel_rate_parray->cur.val64 = pll->vt_pix_clk_freq_hz; + sensor->pixel_rate_csi->cur.val64 = pll->pixel_rate_csi; + + return 0; +} + + +/* + * + * V4L2 Controls handling + * + */ + +static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor) +{ + struct v4l2_ctrl *ctrl = sensor->exposure; + int max; + + max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + + sensor->vblank->val + - sensor->limits[SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN]; + + ctrl->maximum = max; + if (ctrl->default_value > max) + ctrl->default_value = max; + if (ctrl->val > max) + ctrl->val = max; + if (ctrl->cur.val > max) + ctrl->cur.val = max; +} + +/* + * Order matters. + * + * 1. Bits-per-pixel, descending. + * 2. Bits-per-pixel compressed, descending. + * 3. Pixel order, same as in pixel_order_str. Formats for all four pixel + * orders must be defined. + */ +static const struct smiapp_csi_data_format smiapp_csi_data_formats[] = { + { V4L2_MBUS_FMT_SGRBG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GRBG, }, + { V4L2_MBUS_FMT_SRGGB12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_RGGB, }, + { V4L2_MBUS_FMT_SBGGR12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_BGGR, }, + { V4L2_MBUS_FMT_SGBRG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GBRG, }, + { V4L2_MBUS_FMT_SGRBG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GRBG, }, + { V4L2_MBUS_FMT_SRGGB10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_RGGB, }, + { V4L2_MBUS_FMT_SBGGR10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_BGGR, }, + { V4L2_MBUS_FMT_SGBRG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GBRG, }, + { V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GRBG, }, + { V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_RGGB, }, + { V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_BGGR, }, + { V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GBRG, }, + { V4L2_MBUS_FMT_SGRBG8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_GRBG, }, + { V4L2_MBUS_FMT_SRGGB8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_RGGB, }, + { V4L2_MBUS_FMT_SBGGR8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_BGGR, }, + { V4L2_MBUS_FMT_SGBRG8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_GBRG, }, +}; + +const char *pixel_order_str[] = { "GRBG", "RGGB", "BGGR", "GBRG" }; + +#define to_csi_format_idx(fmt) (((unsigned long)(fmt) \ + - (unsigned long)smiapp_csi_data_formats) \ + / sizeof(*smiapp_csi_data_formats)) + +static u32 smiapp_pixel_order(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int flip = 0; + + if (sensor->hflip) { + if (sensor->hflip->val) + flip |= SMIAPP_IMAGE_ORIENTATION_HFLIP; + + if (sensor->vflip->val) + flip |= SMIAPP_IMAGE_ORIENTATION_VFLIP; + } + + flip ^= sensor->hvflip_inv_mask; + + dev_dbg(&client->dev, "flip %d\n", flip); + return sensor->default_pixel_order ^ flip; +} + +static void smiapp_update_mbus_formats(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int csi_format_idx = + to_csi_format_idx(sensor->csi_format) & ~3; + unsigned int internal_csi_format_idx = + to_csi_format_idx(sensor->internal_csi_format) & ~3; + unsigned int pixel_order = smiapp_pixel_order(sensor); + + sensor->mbus_frame_fmts = + sensor->default_mbus_frame_fmts << pixel_order; + sensor->csi_format = + &smiapp_csi_data_formats[csi_format_idx + pixel_order]; + sensor->internal_csi_format = + &smiapp_csi_data_formats[internal_csi_format_idx + + pixel_order]; + + BUG_ON(max(internal_csi_format_idx, csi_format_idx) + pixel_order + >= ARRAY_SIZE(smiapp_csi_data_formats)); + BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0); + + dev_dbg(&client->dev, "new pixel order %s\n", + pixel_order_str[pixel_order]); +} + +static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct smiapp_sensor *sensor = + container_of(ctrl->handler, struct smiapp_subdev, ctrl_handler) + ->sensor; + u32 orient = 0; + int exposure; + int rval; + + switch (ctrl->id) { + case V4L2_CID_ANALOGUE_GAIN: + return smiapp_write( + sensor, + SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL, ctrl->val); + + case V4L2_CID_EXPOSURE: + return smiapp_write( + sensor, + SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val); + + case V4L2_CID_HFLIP: + case V4L2_CID_VFLIP: + if (sensor->streaming) + return -EBUSY; + + if (sensor->hflip->val) + orient |= SMIAPP_IMAGE_ORIENTATION_HFLIP; + + if (sensor->vflip->val) + orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP; + + orient ^= sensor->hvflip_inv_mask; + rval = smiapp_write(sensor, + SMIAPP_REG_U8_IMAGE_ORIENTATION, + orient); + if (rval < 0) + return rval; + + smiapp_update_mbus_formats(sensor); + + return 0; + + case V4L2_CID_VBLANK: + exposure = sensor->exposure->val; + + __smiapp_update_exposure_limits(sensor); + + if (exposure > sensor->exposure->maximum) { + sensor->exposure->val = + sensor->exposure->maximum; + rval = smiapp_set_ctrl( + sensor->exposure); + if (rval < 0) + return rval; + } + + return smiapp_write( + sensor, SMIAPP_REG_U16_FRAME_LENGTH_LINES, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + + ctrl->val); + + case V4L2_CID_HBLANK: + return smiapp_write( + sensor, SMIAPP_REG_U16_LINE_LENGTH_PCK, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width + + ctrl->val); + + case V4L2_CID_LINK_FREQ: + if (sensor->streaming) + return -EBUSY; + + return smiapp_pll_update(sensor); + + default: + return -EINVAL; + } +} + +static const struct v4l2_ctrl_ops smiapp_ctrl_ops = { + .s_ctrl = smiapp_set_ctrl, +}; + +static int smiapp_init_controls(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int max; + int rval; + + rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 7); + if (rval) + return rval; + sensor->pixel_array->ctrl_handler.lock = &sensor->mutex; + + sensor->analog_gain = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_ANALOGUE_GAIN, + sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN], + sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX], + max(sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP], 1U), + sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN]); + + /* Exposure limits will be updated soon, use just something here. */ + sensor->exposure = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_EXPOSURE, 0, 0, 1, 0); + + sensor->hflip = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + sensor->vflip = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + sensor->vblank = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_VBLANK, 0, 1, 1, 0); + + if (sensor->vblank) + sensor->vblank->flags |= V4L2_CTRL_FLAG_UPDATE; + + sensor->hblank = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_HBLANK, 0, 1, 1, 0); + + if (sensor->hblank) + sensor->hblank->flags |= V4L2_CTRL_FLAG_UPDATE; + + sensor->pixel_rate_parray = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_PIXEL_RATE, 0, 0, 1, 0); + + if (sensor->pixel_array->ctrl_handler.error) { + dev_err(&client->dev, + "pixel array controls initialization failed (%d)\n", + sensor->pixel_array->ctrl_handler.error); + rval = sensor->pixel_array->ctrl_handler.error; + goto error; + } + + sensor->pixel_array->sd.ctrl_handler = + &sensor->pixel_array->ctrl_handler; + + v4l2_ctrl_cluster(2, &sensor->hflip); + + rval = v4l2_ctrl_handler_init(&sensor->src->ctrl_handler, 0); + if (rval) + goto error; + sensor->src->ctrl_handler.lock = &sensor->mutex; + + for (max = 0; sensor->platform_data->op_sys_clock[max + 1]; max++); + + sensor->link_freq = v4l2_ctrl_new_int_menu( + &sensor->src->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_LINK_FREQ, max, 0, + sensor->platform_data->op_sys_clock); + + sensor->pixel_rate_csi = v4l2_ctrl_new_std( + &sensor->src->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_PIXEL_RATE, 0, 0, 1, 0); + + if (sensor->src->ctrl_handler.error) { + dev_err(&client->dev, + "src controls initialization failed (%d)\n", + sensor->src->ctrl_handler.error); + rval = sensor->src->ctrl_handler.error; + goto error; + } + + sensor->src->sd.ctrl_handler = + &sensor->src->ctrl_handler; + + return 0; + +error: + v4l2_ctrl_handler_free(&sensor->pixel_array->ctrl_handler); + v4l2_ctrl_handler_free(&sensor->src->ctrl_handler); + + return rval; +} + +static void smiapp_free_controls(struct smiapp_sensor *sensor) +{ + unsigned int i; + + for (i = 0; i < sensor->ssds_used; i++) + v4l2_ctrl_handler_free(&sensor->ssds[i].ctrl_handler); +} + +static int smiapp_get_limits(struct smiapp_sensor *sensor, int const *limit, + unsigned int n) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int i; + u32 val; + int rval; + + for (i = 0; i < n; i++) { + rval = smiapp_read( + sensor, smiapp_reg_limits[limit[i]].addr, &val); + if (rval) + return rval; + sensor->limits[limit[i]] = val; + dev_dbg(&client->dev, "0x%8.8x \"%s\" = %d, 0x%x\n", + smiapp_reg_limits[limit[i]].addr, + smiapp_reg_limits[limit[i]].what, val, val); + } + + return 0; +} + +static int smiapp_get_all_limits(struct smiapp_sensor *sensor) +{ + unsigned int i; + int rval; + + for (i = 0; i < SMIAPP_LIMIT_LAST; i++) { + rval = smiapp_get_limits(sensor, &i, 1); + if (rval < 0) + return rval; + } + + if (sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] == 0) + smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16); + + return 0; +} + +static int smiapp_get_limits_binning(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + static u32 const limits[] = { + SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN, + SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN, + SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN, + SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN, + SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, + SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN, + SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, + }; + static u32 const limits_replace[] = { + SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES, + SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES, + SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK, + SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK, + SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK, + SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN, + SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN, + }; + unsigned int i; + int rval; + + if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY] == + SMIAPP_BINNING_CAPABILITY_NO) { + for (i = 0; i < ARRAY_SIZE(limits); i++) + sensor->limits[limits[i]] = + sensor->limits[limits_replace[i]]; + + return 0; + } + + rval = smiapp_get_limits(sensor, limits, ARRAY_SIZE(limits)); + if (rval < 0) + return rval; + + /* + * Sanity check whether the binning limits are valid. If not, + * use the non-binning ones. + */ + if (sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] + && sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] + && sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]) + return 0; + + for (i = 0; i < ARRAY_SIZE(limits); i++) { + dev_dbg(&client->dev, + "replace limit 0x%8.8x \"%s\" = %d, 0x%x\n", + smiapp_reg_limits[limits[i]].addr, + smiapp_reg_limits[limits[i]].what, + sensor->limits[limits_replace[i]], + sensor->limits[limits_replace[i]]); + sensor->limits[limits[i]] = + sensor->limits[limits_replace[i]]; + } + + return 0; +} + +static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int type, n; + unsigned int i, pixel_order; + int rval; + + rval = smiapp_read( + sensor, SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE, &type); + if (rval) + return rval; + + dev_dbg(&client->dev, "data_format_model_type %d\n", type); + + rval = smiapp_read(sensor, SMIAPP_REG_U8_PIXEL_ORDER, + &pixel_order); + if (rval) + return rval; + + if (pixel_order >= ARRAY_SIZE(pixel_order_str)) { + dev_dbg(&client->dev, "bad pixel order %d\n", pixel_order); + return -EINVAL; + } + + dev_dbg(&client->dev, "pixel order %d (%s)\n", pixel_order, + pixel_order_str[pixel_order]); + + switch (type) { + case SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL: + n = SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N; + break; + case SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED: + n = SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N; + break; + default: + return -EINVAL; + } + + sensor->default_pixel_order = pixel_order; + sensor->mbus_frame_fmts = 0; + + for (i = 0; i < n; i++) { + unsigned int fmt, j; + + rval = smiapp_read( + sensor, + SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(i), &fmt); + if (rval) + return rval; + + dev_dbg(&client->dev, "bpp %d, compressed %d\n", + fmt >> 8, (u8)fmt); + + for (j = 0; j < ARRAY_SIZE(smiapp_csi_data_formats); j++) { + const struct smiapp_csi_data_format *f = + &smiapp_csi_data_formats[j]; + + if (f->pixel_order != SMIAPP_PIXEL_ORDER_GRBG) + continue; + + if (f->width != fmt >> 8 || f->compressed != (u8)fmt) + continue; + + dev_dbg(&client->dev, "jolly good! %d\n", j); + + sensor->default_mbus_frame_fmts |= 1 << j; + if (!sensor->csi_format + || f->width > sensor->csi_format->width + || (f->width == sensor->csi_format->width + && f->compressed + > sensor->csi_format->compressed)) { + sensor->csi_format = f; + sensor->internal_csi_format = f; + } + } + } + + if (!sensor->csi_format) { + dev_err(&client->dev, "no supported mbus code found\n"); + return -EINVAL; + } + + smiapp_update_mbus_formats(sensor); + + return 0; +} + +static void smiapp_update_blanking(struct smiapp_sensor *sensor) +{ + struct v4l2_ctrl *vblank = sensor->vblank; + struct v4l2_ctrl *hblank = sensor->hblank; + + vblank->minimum = + max_t(int, + sensor->limits[SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES], + sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] - + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height); + vblank->maximum = + sensor->limits[SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN] - + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height; + + vblank->val = clamp_t(int, vblank->val, + vblank->minimum, vblank->maximum); + vblank->default_value = vblank->minimum; + vblank->val = vblank->val; + vblank->cur.val = vblank->val; + + hblank->minimum = + max_t(int, + sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] - + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width, + sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]); + hblank->maximum = + sensor->limits[SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN] - + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width; + + hblank->val = clamp_t(int, hblank->val, + hblank->minimum, hblank->maximum); + hblank->default_value = hblank->minimum; + hblank->val = hblank->val; + hblank->cur.val = hblank->val; + + __smiapp_update_exposure_limits(sensor); +} + +static int smiapp_update_mode(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int binning_mode; + int rval; + + dev_dbg(&client->dev, "frame size: %dx%d\n", + sensor->src->crop[SMIAPP_PAD_SRC].width, + sensor->src->crop[SMIAPP_PAD_SRC].height); + dev_dbg(&client->dev, "csi format width: %d\n", + sensor->csi_format->width); + + /* Binning has to be set up here; it affects limits */ + if (sensor->binning_horizontal == 1 && + sensor->binning_vertical == 1) { + binning_mode = 0; + } else { + u8 binning_type = + (sensor->binning_horizontal << 4) + | sensor->binning_vertical; + + rval = smiapp_write( + sensor, SMIAPP_REG_U8_BINNING_TYPE, binning_type); + if (rval < 0) + return rval; + + binning_mode = 1; + } + rval = smiapp_write(sensor, SMIAPP_REG_U8_BINNING_MODE, binning_mode); + if (rval < 0) + return rval; + + /* Get updated limits due to binning */ + rval = smiapp_get_limits_binning(sensor); + if (rval < 0) + return rval; + + rval = smiapp_pll_update(sensor); + if (rval < 0) + return rval; + + /* Output from pixel array, including blanking */ + smiapp_update_blanking(sensor); + + dev_dbg(&client->dev, "vblank\t\t%d\n", sensor->vblank->val); + dev_dbg(&client->dev, "hblank\t\t%d\n", sensor->hblank->val); + + dev_dbg(&client->dev, "real timeperframe\t100/%d\n", + sensor->pll.vt_pix_clk_freq_hz / + ((sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width + + sensor->hblank->val) * + (sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + + sensor->vblank->val) / 100)); + + return 0; +} + +/* + * + * SMIA++ NVM handling + * + */ +static int smiapp_read_nvm(struct smiapp_sensor *sensor, + unsigned char *nvm) +{ + u32 i, s, p, np, v; + int rval = 0, rval2; + + np = sensor->nvm_size / SMIAPP_NVM_PAGE_SIZE; + for (p = 0; p < np; p++) { + rval = smiapp_write( + sensor, + SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT, p); + if (rval) + goto out; + + rval = smiapp_write(sensor, + SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, + SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN | + SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN); + if (rval) + goto out; + + for (i = 0; i < 1000; i++) { + rval = smiapp_read( + sensor, + SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s); + + if (rval) + goto out; + + if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY) + break; + + if (--i == 0) { + rval = -ETIMEDOUT; + goto out; + } + + } + + for (i = 0; i < SMIAPP_NVM_PAGE_SIZE; i++) { + rval = smiapp_read( + sensor, + SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 + i, + &v); + if (rval) + goto out; + + *nvm++ = v; + } + } + +out: + rval2 = smiapp_write(sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, 0); + if (rval < 0) + return rval; + else + return rval2; +} + +/* + * + * SMIA++ CCI address control + * + */ +static int smiapp_change_cci_addr(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + u32 val; + + client->addr = sensor->platform_data->i2c_addr_dfl; + + rval = smiapp_write(sensor, + SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, + sensor->platform_data->i2c_addr_alt << 1); + if (rval) + return rval; + + client->addr = sensor->platform_data->i2c_addr_alt; + + /* verify addr change went ok */ + rval = smiapp_read(sensor, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, &val); + if (rval) + return rval; + + if (val != sensor->platform_data->i2c_addr_alt << 1) + return -ENODEV; + + return 0; +} + +/* + * + * SMIA++ Mode Control + * + */ +static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor) +{ + struct smiapp_flash_strobe_parms *strobe_setup; + unsigned int ext_freq = sensor->platform_data->ext_clk; + u32 tmp; + u32 strobe_adjustment; + u32 strobe_width_high_rs; + int rval; + + strobe_setup = sensor->platform_data->strobe_setup; + + /* + * How to calculate registers related to strobe length. Please + * do not change, or if you do at least know what you're + * doing. :-) + * + * Sakari Ailus 2010-10-25 + * + * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl + * / EXTCLK freq [Hz]) * flash_strobe_adjustment + * + * tFlash_strobe_width_ctrl E N, [1 - 0xffff] + * flash_strobe_adjustment E N, [1 - 0xff] + * + * The formula above is written as below to keep it on one + * line: + * + * l / 10^6 = w / e * a + * + * Let's mark w * a by x: + * + * x = w * a + * + * Thus, we get: + * + * x = l * e / 10^6 + * + * The strobe width must be at least as long as requested, + * thus rounding upwards is needed. + * + * x = (l * e + 10^6 - 1) / 10^6 + * ----------------------------- + * + * Maximum possible accuracy is wanted at all times. Thus keep + * a as small as possible. + * + * Calculate a, assuming maximum w, with rounding upwards: + * + * a = (x + (2^16 - 1) - 1) / (2^16 - 1) + * ------------------------------------- + * + * Thus, we also get w, with that a, with rounding upwards: + * + * w = (x + a - 1) / a + * ------------------- + * + * To get limits: + * + * x E [1, (2^16 - 1) * (2^8 - 1)] + * + * Substituting maximum x to the original formula (with rounding), + * the maximum l is thus + * + * (2^16 - 1) * (2^8 - 1) * 10^6 = l * e + 10^6 - 1 + * + * l = (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / e + * -------------------------------------------------- + * + * flash_strobe_length must be clamped between 1 and + * (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / EXTCLK freq. + * + * Then, + * + * flash_strobe_adjustment = ((flash_strobe_length * + * EXTCLK freq + 10^6 - 1) / 10^6 + (2^16 - 1) - 1) / (2^16 - 1) + * + * tFlash_strobe_width_ctrl = ((flash_strobe_length * + * EXTCLK freq + 10^6 - 1) / 10^6 + + * flash_strobe_adjustment - 1) / flash_strobe_adjustment + */ + tmp = div_u64(1000000ULL * ((1 << 16) - 1) * ((1 << 8) - 1) - + 1000000 + 1, ext_freq); + strobe_setup->strobe_width_high_us = + clamp_t(u32, strobe_setup->strobe_width_high_us, 1, tmp); + + tmp = div_u64(((u64)strobe_setup->strobe_width_high_us * (u64)ext_freq + + 1000000 - 1), 1000000ULL); + strobe_adjustment = (tmp + (1 << 16) - 1 - 1) / ((1 << 16) - 1); + strobe_width_high_rs = (tmp + strobe_adjustment - 1) / + strobe_adjustment; + + rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_MODE_RS, + strobe_setup->mode); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT, + strobe_adjustment); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL, + strobe_width_high_rs); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL, + strobe_setup->strobe_delay); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U16_FLASH_STROBE_START_POINT, + strobe_setup->stobe_start_point); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_TRIGGER_RS, + strobe_setup->trigger); + +out: + sensor->platform_data->strobe_setup->trigger = 0; + + return rval; +} + +/* ----------------------------------------------------------------------------- + * Power management + */ + +static int smiapp_power_on(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int sleep; + int rval; + + rval = regulator_enable(sensor->vana); + if (rval) { + dev_err(&client->dev, "failed to enable vana regulator\n"); + return rval; + } + usleep_range(1000, 1000); + + if (sensor->platform_data->set_xclk) + rval = sensor->platform_data->set_xclk( + &sensor->src->sd, sensor->platform_data->ext_clk); + else + rval = clk_enable(sensor->ext_clk); + if (rval < 0) { + dev_dbg(&client->dev, "failed to set xclk\n"); + goto out_xclk_fail; + } + usleep_range(1000, 1000); + + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_set_value(sensor->platform_data->xshutdown, 1); + + sleep = SMIAPP_RESET_DELAY(sensor->platform_data->ext_clk); + usleep_range(sleep, sleep); + + /* + * Failures to respond to the address change command have been noticed. + * Those failures seem to be caused by the sensor requiring a longer + * boot time than advertised. An additional 10ms delay seems to work + * around the issue, but the SMIA++ I2C write retry hack makes the delay + * unnecessary. The failures need to be investigated to find a proper + * fix, and a delay will likely need to be added here if the I2C write + * retry hack is reverted before the root cause of the boot time issue + * is found. + */ + + if (sensor->platform_data->i2c_addr_alt) { + rval = smiapp_change_cci_addr(sensor); + if (rval) { + dev_err(&client->dev, "cci address change error\n"); + goto out_cci_addr_fail; + } + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_SOFTWARE_RESET, + SMIAPP_SOFTWARE_RESET); + if (rval < 0) { + dev_err(&client->dev, "software reset failed\n"); + goto out_cci_addr_fail; + } + + if (sensor->platform_data->i2c_addr_alt) { + rval = smiapp_change_cci_addr(sensor); + if (rval) { + dev_err(&client->dev, "cci address change error\n"); + goto out_cci_addr_fail; + } + } + + rval = smiapp_write(sensor, SMIAPP_REG_U16_COMPRESSION_MODE, + SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR); + if (rval) { + dev_err(&client->dev, "compression mode set failed\n"); + goto out_cci_addr_fail; + } + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ, + sensor->platform_data->ext_clk / (1000000 / (1 << 8))); + if (rval) { + dev_err(&client->dev, "extclk frequency set failed\n"); + goto out_cci_addr_fail; + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_LANE_MODE, + sensor->platform_data->lanes - 1); + if (rval) { + dev_err(&client->dev, "csi lane mode set failed\n"); + goto out_cci_addr_fail; + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_FAST_STANDBY_CTRL, + SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE); + if (rval) { + dev_err(&client->dev, "fast standby set failed\n"); + goto out_cci_addr_fail; + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_SIGNALLING_MODE, + sensor->platform_data->csi_signalling_mode); + if (rval) { + dev_err(&client->dev, "csi signalling mode set failed\n"); + goto out_cci_addr_fail; + } + + /* DPHY control done by sensor based on requested link rate */ + rval = smiapp_write(sensor, SMIAPP_REG_U8_DPHY_CTRL, + SMIAPP_DPHY_CTRL_UI); + if (rval < 0) + return rval; + + rval = smiapp_call_quirk(sensor, post_poweron); + if (rval) { + dev_err(&client->dev, "post_poweron quirks failed\n"); + goto out_cci_addr_fail; + } + + /* Are we still initialising...? If yes, return here. */ + if (!sensor->pixel_array) + return 0; + + rval = v4l2_ctrl_handler_setup( + &sensor->pixel_array->ctrl_handler); + if (rval) + goto out_cci_addr_fail; + + rval = v4l2_ctrl_handler_setup(&sensor->src->ctrl_handler); + if (rval) + goto out_cci_addr_fail; + + mutex_lock(&sensor->mutex); + rval = smiapp_update_mode(sensor); + mutex_unlock(&sensor->mutex); + if (rval < 0) + goto out_cci_addr_fail; + + return 0; + +out_cci_addr_fail: + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_set_value(sensor->platform_data->xshutdown, 0); + if (sensor->platform_data->set_xclk) + sensor->platform_data->set_xclk(&sensor->src->sd, 0); + else + clk_disable(sensor->ext_clk); + +out_xclk_fail: + regulator_disable(sensor->vana); + return rval; +} + +static void smiapp_power_off(struct smiapp_sensor *sensor) +{ + /* + * Currently power/clock to lens are enable/disabled separately + * but they are essentially the same signals. So if the sensor is + * powered off while the lens is powered on the sensor does not + * really see a power off and next time the cci address change + * will fail. So do a soft reset explicitly here. + */ + if (sensor->platform_data->i2c_addr_alt) + smiapp_write(sensor, + SMIAPP_REG_U8_SOFTWARE_RESET, + SMIAPP_SOFTWARE_RESET); + + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_set_value(sensor->platform_data->xshutdown, 0); + if (sensor->platform_data->set_xclk) + sensor->platform_data->set_xclk(&sensor->src->sd, 0); + else + clk_disable(sensor->ext_clk); + usleep_range(5000, 5000); + regulator_disable(sensor->vana); + sensor->streaming = 0; +} + +static int smiapp_set_power(struct v4l2_subdev *subdev, int on) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int ret = 0; + + mutex_lock(&sensor->power_mutex); + + /* + * If the power count is modified from 0 to != 0 or from != 0 + * to 0, update the power state. + */ + if (!sensor->power_count == !on) + goto out; + + if (on) { + /* Power on and perform initialisation. */ + ret = smiapp_power_on(sensor); + if (ret < 0) + goto out; + } else { + smiapp_power_off(sensor); + } + + /* Update the power count. */ + sensor->power_count += on ? 1 : -1; + WARN_ON(sensor->power_count < 0); + +out: + mutex_unlock(&sensor->power_mutex); + return ret; +} + +/* ----------------------------------------------------------------------------- + * Video stream management + */ + +static int smiapp_start_streaming(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + + mutex_lock(&sensor->mutex); + + rval = smiapp_write(sensor, SMIAPP_REG_U16_CSI_DATA_FORMAT, + (sensor->csi_format->width << 8) | + sensor->csi_format->compressed); + if (rval) + goto out; + + rval = smiapp_pll_configure(sensor); + if (rval) + goto out; + + /* Analog crop start coordinates */ + rval = smiapp_write(sensor, SMIAPP_REG_U16_X_ADDR_START, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U16_Y_ADDR_START, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top); + if (rval < 0) + goto out; + + /* Analog crop end coordinates */ + rval = smiapp_write( + sensor, SMIAPP_REG_U16_X_ADDR_END, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left + + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width - 1); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_Y_ADDR_END, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top + + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height - 1); + if (rval < 0) + goto out; + + /* + * Output from pixel array, including blanking, is set using + * controls below. No need to set here. + */ + + /* Digital crop */ + if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY] + == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) { + rval = smiapp_write( + sensor, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET, + sensor->scaler->crop[SMIAPP_PAD_SINK].left); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET, + sensor->scaler->crop[SMIAPP_PAD_SINK].top); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH, + sensor->scaler->crop[SMIAPP_PAD_SINK].width); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT, + sensor->scaler->crop[SMIAPP_PAD_SINK].height); + if (rval < 0) + goto out; + } + + /* Scaling */ + if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + != SMIAPP_SCALING_CAPABILITY_NONE) { + rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALING_MODE, + sensor->scaling_mode); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALE_M, + sensor->scale_m); + if (rval < 0) + goto out; + } + + /* Output size from sensor */ + rval = smiapp_write(sensor, SMIAPP_REG_U16_X_OUTPUT_SIZE, + sensor->src->crop[SMIAPP_PAD_SRC].width); + if (rval < 0) + goto out; + rval = smiapp_write(sensor, SMIAPP_REG_U16_Y_OUTPUT_SIZE, + sensor->src->crop[SMIAPP_PAD_SRC].height); + if (rval < 0) + goto out; + + if ((sensor->flash_capability & + (SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE | + SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) && + sensor->platform_data->strobe_setup != NULL && + sensor->platform_data->strobe_setup->trigger != 0) { + rval = smiapp_setup_flash_strobe(sensor); + if (rval) + goto out; + } + + rval = smiapp_call_quirk(sensor, pre_streamon); + if (rval) { + dev_err(&client->dev, "pre_streamon quirks failed\n"); + goto out; + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_MODE_SELECT, + SMIAPP_MODE_SELECT_STREAMING); + +out: + mutex_unlock(&sensor->mutex); + + return rval; +} + +static int smiapp_stop_streaming(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + + mutex_lock(&sensor->mutex); + rval = smiapp_write(sensor, SMIAPP_REG_U8_MODE_SELECT, + SMIAPP_MODE_SELECT_SOFTWARE_STANDBY); + if (rval) + goto out; + + rval = smiapp_call_quirk(sensor, post_streamoff); + if (rval) + dev_err(&client->dev, "post_streamoff quirks failed\n"); + +out: + mutex_unlock(&sensor->mutex); + return rval; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev video operations + */ + +static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int rval; + + if (sensor->streaming == enable) + return 0; + + if (enable) { + sensor->streaming = 1; + rval = smiapp_start_streaming(sensor); + if (rval < 0) + sensor->streaming = 0; + } else { + rval = smiapp_stop_streaming(sensor); + sensor->streaming = 0; + } + + return rval; +} + +static int smiapp_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int i; + int idx = -1; + int rval = -EINVAL; + + mutex_lock(&sensor->mutex); + + dev_err(&client->dev, "subdev %s, pad %d, index %d\n", + subdev->name, code->pad, code->index); + + if (subdev != &sensor->src->sd || code->pad != SMIAPP_PAD_SRC) { + if (code->index) + goto out; + + code->code = sensor->internal_csi_format->code; + rval = 0; + goto out; + } + + for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { + if (sensor->mbus_frame_fmts & (1 << i)) + idx++; + + if (idx == code->index) { + code->code = smiapp_csi_data_formats[i].code; + dev_err(&client->dev, "found index %d, i %d, code %x\n", + code->index, i, code->code); + rval = 0; + break; + } + } + +out: + mutex_unlock(&sensor->mutex); + + return rval; +} + +static u32 __smiapp_get_mbus_code(struct v4l2_subdev *subdev, + unsigned int pad) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + + if (subdev == &sensor->src->sd && pad == SMIAPP_PAD_SRC) + return sensor->csi_format->code; + else + return sensor->internal_csi_format->code; +} + +static int __smiapp_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad); + } else { + struct v4l2_rect *r; + + if (fmt->pad == ssd->source_pad) + r = &ssd->crop[ssd->source_pad]; + else + r = &ssd->sink_fmt; + + fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad); + fmt->format.width = r->width; + fmt->format.height = r->height; + } + + return 0; +} + +static int smiapp_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int rval; + + mutex_lock(&sensor->mutex); + rval = __smiapp_get_format(subdev, fh, fmt); + mutex_unlock(&sensor->mutex); + + return rval; +} + +static void smiapp_get_crop_compose(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_rect **crops, + struct v4l2_rect **comps, int which) +{ + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + unsigned int i; + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { + if (crops) + for (i = 0; i < subdev->entity.num_pads; i++) + crops[i] = &ssd->crop[i]; + if (comps) + *comps = &ssd->compose; + } else { + if (crops) { + for (i = 0; i < subdev->entity.num_pads; i++) { + crops[i] = v4l2_subdev_get_try_crop(fh, i); + BUG_ON(!crops[i]); + } + } + if (comps) { + *comps = v4l2_subdev_get_try_compose(fh, + SMIAPP_PAD_SINK); + BUG_ON(!*comps); + } + } +} + +/* Changes require propagation only on sink pad. */ +static void smiapp_propagate(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, int which, + int target) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *comp, *crops[SMIAPP_PADS]; + + smiapp_get_crop_compose(subdev, fh, crops, &comp, which); + + switch (target) { + case V4L2_SEL_TGT_CROP: + comp->width = crops[SMIAPP_PAD_SINK]->width; + comp->height = crops[SMIAPP_PAD_SINK]->height; + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { + if (ssd == sensor->scaler) { + sensor->scale_m = + sensor->limits[ + SMIAPP_LIMIT_SCALER_N_MIN]; + sensor->scaling_mode = + SMIAPP_SCALING_MODE_NONE; + } else if (ssd == sensor->binner) { + sensor->binning_horizontal = 1; + sensor->binning_vertical = 1; + } + } + /* Fall through */ + case V4L2_SEL_TGT_COMPOSE: + *crops[SMIAPP_PAD_SRC] = *comp; + break; + default: + BUG(); + } +} + +static const struct smiapp_csi_data_format +*smiapp_validate_csi_data_format(struct smiapp_sensor *sensor, u32 code) +{ + const struct smiapp_csi_data_format *csi_format = sensor->csi_format; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { + if (sensor->mbus_frame_fmts & (1 << i) + && smiapp_csi_data_formats[i].code == code) + return &smiapp_csi_data_formats[i]; + } + + return csi_format; +} + +static int smiapp_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *crops[SMIAPP_PADS]; + + mutex_lock(&sensor->mutex); + + /* + * Media bus code is changeable on src subdev's source pad. On + * other source pads we just get format here. + */ + if (fmt->pad == ssd->source_pad) { + u32 code = fmt->format.code; + int rval = __smiapp_get_format(subdev, fh, fmt); + + if (!rval && subdev == &sensor->src->sd) { + const struct smiapp_csi_data_format *csi_format = + smiapp_validate_csi_data_format(sensor, code); + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + sensor->csi_format = csi_format; + fmt->format.code = csi_format->code; + } + + mutex_unlock(&sensor->mutex); + return rval; + } + + /* Sink pad. Width and height are changeable here. */ + fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad); + fmt->format.width &= ~1; + fmt->format.height &= ~1; + + fmt->format.width = + clamp(fmt->format.width, + sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE], + sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]); + fmt->format.height = + clamp(fmt->format.height, + sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE], + sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]); + + smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which); + + crops[ssd->sink_pad]->left = 0; + crops[ssd->sink_pad]->top = 0; + crops[ssd->sink_pad]->width = fmt->format.width; + crops[ssd->sink_pad]->height = fmt->format.height; + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ssd->sink_fmt = *crops[ssd->sink_pad]; + smiapp_propagate(subdev, fh, fmt->which, + V4L2_SEL_TGT_CROP); + + mutex_unlock(&sensor->mutex); + + return 0; +} + +/* + * Calculate goodness of scaled image size compared to expected image + * size and flags provided. + */ +#define SCALING_GOODNESS 100000 +#define SCALING_GOODNESS_EXTREME 100000000 +static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w, + int h, int ask_h, u32 flags) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + int val = 0; + + w &= ~1; + ask_w &= ~1; + h &= ~1; + ask_h &= ~1; + + if (flags & V4L2_SEL_FLAG_GE) { + if (w < ask_w) + val -= SCALING_GOODNESS; + if (h < ask_h) + val -= SCALING_GOODNESS; + } + + if (flags & V4L2_SEL_FLAG_LE) { + if (w > ask_w) + val -= SCALING_GOODNESS; + if (h > ask_h) + val -= SCALING_GOODNESS; + } + + val -= abs(w - ask_w); + val -= abs(h - ask_h); + + if (w < sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE]) + val -= SCALING_GOODNESS_EXTREME; + + dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n", + w, ask_h, h, ask_h, val); + + return val; +} + +static void smiapp_set_compose_binner(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel, + struct v4l2_rect **crops, + struct v4l2_rect *comp) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int i; + unsigned int binh = 1, binv = 1; + unsigned int best = scaling_goodness( + subdev, + crops[SMIAPP_PAD_SINK]->width, sel->r.width, + crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags); + + for (i = 0; i < sensor->nbinning_subtypes; i++) { + int this = scaling_goodness( + subdev, + crops[SMIAPP_PAD_SINK]->width + / sensor->binning_subtypes[i].horizontal, + sel->r.width, + crops[SMIAPP_PAD_SINK]->height + / sensor->binning_subtypes[i].vertical, + sel->r.height, sel->flags); + + if (this > best) { + binh = sensor->binning_subtypes[i].horizontal; + binv = sensor->binning_subtypes[i].vertical; + best = this; + } + } + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + sensor->binning_vertical = binv; + sensor->binning_horizontal = binh; + } + + sel->r.width = (crops[SMIAPP_PAD_SINK]->width / binh) & ~1; + sel->r.height = (crops[SMIAPP_PAD_SINK]->height / binv) & ~1; +} + +/* + * Calculate best scaling ratio and mode for given output resolution. + * + * Try all of these: horizontal ratio, vertical ratio and smallest + * size possible (horizontally). + * + * Also try whether horizontal scaler or full scaler gives a better + * result. + */ +static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel, + struct v4l2_rect **crops, + struct v4l2_rect *comp) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + u32 min, max, a, b, max_m; + u32 scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + int mode = SMIAPP_SCALING_MODE_HORIZONTAL; + u32 try[4]; + u32 ntry = 0; + unsigned int i; + int best = INT_MIN; + + sel->r.width = min_t(unsigned int, sel->r.width, + crops[SMIAPP_PAD_SINK]->width); + sel->r.height = min_t(unsigned int, sel->r.height, + crops[SMIAPP_PAD_SINK]->height); + + a = crops[SMIAPP_PAD_SINK]->width + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.width; + b = crops[SMIAPP_PAD_SINK]->height + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.height; + max_m = crops[SMIAPP_PAD_SINK]->width + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] + / sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE]; + + a = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX], + max(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN])); + b = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX], + max(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN])); + max_m = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX], + max(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN])); + + dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m); + + min = min(max_m, min(a, b)); + max = min(max_m, max(a, b)); + + try[ntry] = min; + ntry++; + if (min != max) { + try[ntry] = max; + ntry++; + } + if (max != max_m) { + try[ntry] = min + 1; + ntry++; + if (min != max) { + try[ntry] = max + 1; + ntry++; + } + } + + for (i = 0; i < ntry; i++) { + int this = scaling_goodness( + subdev, + crops[SMIAPP_PAD_SINK]->width + / try[i] + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN], + sel->r.width, + crops[SMIAPP_PAD_SINK]->height, + sel->r.height, + sel->flags); + + dev_dbg(&client->dev, "trying factor %d (%d)\n", try[i], i); + + if (this > best) { + scale_m = try[i]; + mode = SMIAPP_SCALING_MODE_HORIZONTAL; + best = this; + } + + if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + == SMIAPP_SCALING_CAPABILITY_HORIZONTAL) + continue; + + this = scaling_goodness( + subdev, crops[SMIAPP_PAD_SINK]->width + / try[i] + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN], + sel->r.width, + crops[SMIAPP_PAD_SINK]->height + / try[i] + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN], + sel->r.height, + sel->flags); + + if (this > best) { + scale_m = try[i]; + mode = SMIAPP_SCALING_MODE_BOTH; + best = this; + } + } + + sel->r.width = + (crops[SMIAPP_PAD_SINK]->width + / scale_m + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) & ~1; + if (mode == SMIAPP_SCALING_MODE_BOTH) + sel->r.height = + (crops[SMIAPP_PAD_SINK]->height + / scale_m + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) + & ~1; + else + sel->r.height = crops[SMIAPP_PAD_SINK]->height; + + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + sensor->scale_m = scale_m; + sensor->scaling_mode = mode; + } +} +/* We're only called on source pads. This function sets scaling. */ +static int smiapp_set_compose(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *comp, *crops[SMIAPP_PADS]; + + smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which); + + sel->r.top = 0; + sel->r.left = 0; + + if (ssd == sensor->binner) + smiapp_set_compose_binner(subdev, fh, sel, crops, comp); + else + smiapp_set_compose_scaler(subdev, fh, sel, crops, comp); + + *comp = sel->r; + smiapp_propagate(subdev, fh, sel->which, + V4L2_SEL_TGT_COMPOSE); + + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) + return smiapp_update_mode(sensor); + + return 0; +} + +static int __smiapp_sel_supported(struct v4l2_subdev *subdev, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + + /* We only implement crop in three places. */ + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + case V4L2_SEL_TGT_CROP_BOUNDS: + if (ssd == sensor->pixel_array + && sel->pad == SMIAPP_PA_PAD_SRC) + return 0; + if (ssd == sensor->src + && sel->pad == SMIAPP_PAD_SRC) + return 0; + if (ssd == sensor->scaler + && sel->pad == SMIAPP_PAD_SINK + && sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY] + == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) + return 0; + return -EINVAL; + case V4L2_SEL_TGT_COMPOSE: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + if (sel->pad == ssd->source_pad) + return -EINVAL; + if (ssd == sensor->binner) + return 0; + if (ssd == sensor->scaler + && sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + != SMIAPP_SCALING_CAPABILITY_NONE) + return 0; + /* Fall through */ + default: + return -EINVAL; + } +} + +static int smiapp_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *src_size, *crops[SMIAPP_PADS]; + struct v4l2_rect _r; + + smiapp_get_crop_compose(subdev, fh, crops, NULL, sel->which); + + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + if (sel->pad == ssd->sink_pad) + src_size = &ssd->sink_fmt; + else + src_size = &ssd->compose; + } else { + if (sel->pad == ssd->sink_pad) { + _r.left = 0; + _r.top = 0; + _r.width = v4l2_subdev_get_try_format(fh, sel->pad) + ->width; + _r.height = v4l2_subdev_get_try_format(fh, sel->pad) + ->height; + src_size = &_r; + } else { + src_size = + v4l2_subdev_get_try_compose( + fh, ssd->sink_pad); + } + } + + if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) { + sel->r.left = 0; + sel->r.top = 0; + } + + sel->r.width = min(sel->r.width, src_size->width); + sel->r.height = min(sel->r.height, src_size->height); + + sel->r.left = min(sel->r.left, src_size->width - sel->r.width); + sel->r.top = min(sel->r.top, src_size->height - sel->r.height); + + *crops[sel->pad] = sel->r; + + if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK) + smiapp_propagate(subdev, fh, sel->which, + V4L2_SEL_TGT_CROP); + + return 0; +} + +static int __smiapp_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *comp, *crops[SMIAPP_PADS]; + struct v4l2_rect sink_fmt; + int ret; + + ret = __smiapp_sel_supported(subdev, sel); + if (ret) + return ret; + + smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which); + + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + sink_fmt = ssd->sink_fmt; + } else { + struct v4l2_mbus_framefmt *fmt = + v4l2_subdev_get_try_format(fh, ssd->sink_pad); + + sink_fmt.left = 0; + sink_fmt.top = 0; + sink_fmt.width = fmt->width; + sink_fmt.height = fmt->height; + } + + switch (sel->target) { + case V4L2_SEL_TGT_CROP_BOUNDS: + if (ssd == sensor->pixel_array) { + sel->r.width = + sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; + sel->r.height = + sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; + } else if (sel->pad == ssd->sink_pad) { + sel->r = sink_fmt; + } else { + sel->r = *comp; + } + break; + case V4L2_SEL_TGT_CROP: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + sel->r = *crops[sel->pad]; + break; + case V4L2_SEL_TGT_COMPOSE: + sel->r = *comp; + break; + } + + return 0; +} + +static int smiapp_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int rval; + + mutex_lock(&sensor->mutex); + rval = __smiapp_get_selection(subdev, fh, sel); + mutex_unlock(&sensor->mutex); + + return rval; +} +static int smiapp_set_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int ret; + + ret = __smiapp_sel_supported(subdev, sel); + if (ret) + return ret; + + mutex_lock(&sensor->mutex); + + sel->r.left = max(0, sel->r.left & ~1); + sel->r.top = max(0, sel->r.top & ~1); + sel->r.width = max(0, SMIAPP_ALIGN_DIM(sel->r.width, sel->flags)); + sel->r.height = max(0, SMIAPP_ALIGN_DIM(sel->r.height, sel->flags)); + + sel->r.width = max_t(unsigned int, + sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE], + sel->r.width); + sel->r.height = max_t(unsigned int, + sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE], + sel->r.height); + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + ret = smiapp_set_crop(subdev, fh, sel); + break; + case V4L2_SEL_TGT_COMPOSE: + ret = smiapp_set_compose(subdev, fh, sel); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&sensor->mutex); + return ret; +} + +static int smiapp_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + + *frames = sensor->frame_skip; + return 0; +} + +/* ----------------------------------------------------------------------------- + * sysfs attributes + */ + +static ssize_t +smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev)); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int nbytes; + + if (!sensor->dev_init_done) + return -EBUSY; + + if (!sensor->nvm_size) { + /* NVM not read yet - read it now */ + sensor->nvm_size = sensor->platform_data->nvm_size; + if (smiapp_set_power(subdev, 1) < 0) + return -ENODEV; + if (smiapp_read_nvm(sensor, sensor->nvm)) { + dev_err(&client->dev, "nvm read failed\n"); + return -ENODEV; + } + smiapp_set_power(subdev, 0); + } + /* + * NVM is still way below a PAGE_SIZE, so we can safely + * assume this for now. + */ + nbytes = min_t(unsigned int, sensor->nvm_size, PAGE_SIZE); + memcpy(buf, sensor->nvm, nbytes); + + return nbytes; +} +static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL); + +static ssize_t +smiapp_sysfs_ident_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev)); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_module_info *minfo = &sensor->minfo; + + return snprintf(buf, PAGE_SIZE, "%2.2x%4.4x%2.2x\n", + minfo->manufacturer_id, minfo->model_id, + minfo->revision_number_major) + 1; +} + +static DEVICE_ATTR(ident, S_IRUGO, smiapp_sysfs_ident_read, NULL); + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +static int smiapp_identify_module(struct v4l2_subdev *subdev) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_module_info *minfo = &sensor->minfo; + unsigned int i; + int rval = 0; + + minfo->name = SMIAPP_NAME; + + /* Module info */ + rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MANUFACTURER_ID, + &minfo->manufacturer_id); + if (!rval) + rval = smiapp_read_8only(sensor, SMIAPP_REG_U16_MODEL_ID, + &minfo->model_id); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_REVISION_NUMBER_MAJOR, + &minfo->revision_number_major); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_REVISION_NUMBER_MINOR, + &minfo->revision_number_minor); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_MODULE_DATE_YEAR, + &minfo->module_year); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_MODULE_DATE_MONTH, + &minfo->module_month); + if (!rval) + rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MODULE_DATE_DAY, + &minfo->module_day); + + /* Sensor info */ + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID, + &minfo->sensor_manufacturer_id); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U16_SENSOR_MODEL_ID, + &minfo->sensor_model_id); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_SENSOR_REVISION_NUMBER, + &minfo->sensor_revision_number); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION, + &minfo->sensor_firmware_version); + + /* SMIA */ + if (!rval) + rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SMIA_VERSION, + &minfo->smia_version); + if (!rval) + rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SMIAPP_VERSION, + &minfo->smiapp_version); + + if (rval) { + dev_err(&client->dev, "sensor detection failed\n"); + return -ENODEV; + } + + dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n", + minfo->manufacturer_id, minfo->model_id); + + dev_dbg(&client->dev, + "module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n", + minfo->revision_number_major, minfo->revision_number_minor, + minfo->module_year, minfo->module_month, minfo->module_day); + + dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n", + minfo->sensor_manufacturer_id, minfo->sensor_model_id); + + dev_dbg(&client->dev, + "sensor revision 0x%2.2x firmware version 0x%2.2x\n", + minfo->sensor_revision_number, minfo->sensor_firmware_version); + + dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n", + minfo->smia_version, minfo->smiapp_version); + + /* + * Some modules have bad data in the lvalues below. Hope the + * rvalues have better stuff. The lvalues are module + * parameters whereas the rvalues are sensor parameters. + */ + if (!minfo->manufacturer_id && !minfo->model_id) { + minfo->manufacturer_id = minfo->sensor_manufacturer_id; + minfo->model_id = minfo->sensor_model_id; + minfo->revision_number_major = minfo->sensor_revision_number; + } + + for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) { + if (smiapp_module_idents[i].manufacturer_id + != minfo->manufacturer_id) + continue; + if (smiapp_module_idents[i].model_id != minfo->model_id) + continue; + if (smiapp_module_idents[i].flags + & SMIAPP_MODULE_IDENT_FLAG_REV_LE) { + if (smiapp_module_idents[i].revision_number_major + < minfo->revision_number_major) + continue; + } else { + if (smiapp_module_idents[i].revision_number_major + != minfo->revision_number_major) + continue; + } + + minfo->name = smiapp_module_idents[i].name; + minfo->quirk = smiapp_module_idents[i].quirk; + break; + } + + if (i >= ARRAY_SIZE(smiapp_module_idents)) + dev_warn(&client->dev, + "no quirks for this module; let's hope it's fully compliant\n"); + + dev_dbg(&client->dev, "the sensor is called %s, ident %2.2x%4.4x%2.2x\n", + minfo->name, minfo->manufacturer_id, minfo->model_id, + minfo->revision_number_major); + + strlcpy(subdev->name, sensor->minfo.name, sizeof(subdev->name)); + + return 0; +} + +static const struct v4l2_subdev_ops smiapp_ops; +static const struct v4l2_subdev_internal_ops smiapp_internal_ops; +static const struct media_entity_operations smiapp_entity_ops; + +static int smiapp_registered(struct v4l2_subdev *subdev) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_pll *pll = &sensor->pll; + struct smiapp_subdev *last = NULL; + u32 tmp; + unsigned int i; + int rval; + + sensor->vana = devm_regulator_get(&client->dev, "VANA"); + if (IS_ERR(sensor->vana)) { + dev_err(&client->dev, "could not get regulator for vana\n"); + return -ENODEV; + } + + if (!sensor->platform_data->set_xclk) { + sensor->ext_clk = devm_clk_get(&client->dev, + sensor->platform_data->ext_clk_name); + if (IS_ERR(sensor->ext_clk)) { + dev_err(&client->dev, "could not get clock %s\n", + sensor->platform_data->ext_clk_name); + return -ENODEV; + } + + rval = clk_set_rate(sensor->ext_clk, + sensor->platform_data->ext_clk); + if (rval < 0) { + dev_err(&client->dev, + "unable to set clock %s freq to %u\n", + sensor->platform_data->ext_clk_name, + sensor->platform_data->ext_clk); + return -ENODEV; + } + } + + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) { + if (gpio_request_one(sensor->platform_data->xshutdown, 0, + "SMIA++ xshutdown") != 0) { + dev_err(&client->dev, + "unable to acquire reset gpio %d\n", + sensor->platform_data->xshutdown); + return -ENODEV; + } + } + + rval = smiapp_power_on(sensor); + if (rval) { + rval = -ENODEV; + goto out_smiapp_power_on; + } + + rval = smiapp_identify_module(subdev); + if (rval) { + rval = -ENODEV; + goto out_power_off; + } + + rval = smiapp_get_all_limits(sensor); + if (rval) { + rval = -ENODEV; + goto out_power_off; + } + + /* + * Handle Sensor Module orientation on the board. + * + * The application of H-FLIP and V-FLIP on the sensor is modified by + * the sensor orientation on the board. + * + * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set + * both H-FLIP and V-FLIP for normal operation which also implies + * that a set/unset operation for user space HFLIP and VFLIP v4l2 + * controls will need to be internally inverted. + * + * Rotation also changes the bayer pattern. + */ + if (sensor->platform_data->module_board_orient == + SMIAPP_MODULE_BOARD_ORIENT_180) + sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP | + SMIAPP_IMAGE_ORIENTATION_VFLIP; + + rval = smiapp_get_mbus_formats(sensor); + if (rval) { + rval = -ENODEV; + goto out_power_off; + } + + if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) { + u32 val; + + rval = smiapp_read(sensor, + SMIAPP_REG_U8_BINNING_SUBTYPES, &val); + if (rval < 0) { + rval = -ENODEV; + goto out_power_off; + } + sensor->nbinning_subtypes = min_t(u8, val, + SMIAPP_BINNING_SUBTYPES); + + for (i = 0; i < sensor->nbinning_subtypes; i++) { + rval = smiapp_read( + sensor, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val); + if (rval < 0) { + rval = -ENODEV; + goto out_power_off; + } + sensor->binning_subtypes[i] = + *(struct smiapp_binning_subtype *)&val; + + dev_dbg(&client->dev, "binning %xx%x\n", + sensor->binning_subtypes[i].horizontal, + sensor->binning_subtypes[i].vertical); + } + } + sensor->binning_horizontal = 1; + sensor->binning_vertical = 1; + + if (device_create_file(&client->dev, &dev_attr_ident) != 0) { + dev_err(&client->dev, "sysfs ident entry creation failed\n"); + rval = -ENOENT; + goto out_power_off; + } + /* SMIA++ NVM initialization - it will be read from the sensor + * when it is first requested by userspace. + */ + if (sensor->minfo.smiapp_version && sensor->platform_data->nvm_size) { + sensor->nvm = devm_kzalloc(&client->dev, + sensor->platform_data->nvm_size, GFP_KERNEL); + if (sensor->nvm == NULL) { + dev_err(&client->dev, "nvm buf allocation failed\n"); + rval = -ENOMEM; + goto out_ident_release; + } + + if (device_create_file(&client->dev, &dev_attr_nvm) != 0) { + dev_err(&client->dev, "sysfs nvm entry failed\n"); + rval = -EBUSY; + goto out_ident_release; + } + } + + rval = smiapp_call_quirk(sensor, limits); + if (rval) { + dev_err(&client->dev, "limits quirks failed\n"); + goto out_nvm_release; + } + + /* We consider this as profile 0 sensor if any of these are zero. */ + if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) { + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0; + } else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + != SMIAPP_SCALING_CAPABILITY_NONE) { + if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + == SMIAPP_SCALING_CAPABILITY_HORIZONTAL) + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1; + else + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2; + sensor->scaler = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + } else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY] + == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) { + sensor->scaler = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + } + sensor->binner = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + sensor->pixel_array = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + + sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + + for (i = 0; i < SMIAPP_SUBDEVS; i++) { + struct { + struct smiapp_subdev *ssd; + char *name; + } const __this[] = { + { sensor->scaler, "scaler", }, + { sensor->binner, "binner", }, + { sensor->pixel_array, "pixel array", }, + }, *_this = &__this[i]; + struct smiapp_subdev *this = _this->ssd; + + if (!this) + continue; + + if (this != sensor->src) + v4l2_subdev_init(&this->sd, &smiapp_ops); + + this->sensor = sensor; + + if (this == sensor->pixel_array) { + this->npads = 1; + } else { + this->npads = 2; + this->source_pad = 1; + } + + snprintf(this->sd.name, + sizeof(this->sd.name), "%s %s", + sensor->minfo.name, _this->name); + + this->sink_fmt.width = + sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; + this->sink_fmt.height = + sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; + this->compose.width = this->sink_fmt.width; + this->compose.height = this->sink_fmt.height; + this->crop[this->source_pad] = this->compose; + this->pads[this->source_pad].flags = MEDIA_PAD_FL_SOURCE; + if (this != sensor->pixel_array) { + this->crop[this->sink_pad] = this->compose; + this->pads[this->sink_pad].flags = MEDIA_PAD_FL_SINK; + } + + this->sd.entity.ops = &smiapp_entity_ops; + + if (last == NULL) { + last = this; + continue; + } + + this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + this->sd.internal_ops = &smiapp_internal_ops; + this->sd.owner = NULL; + v4l2_set_subdevdata(&this->sd, client); + + rval = media_entity_init(&this->sd.entity, + this->npads, this->pads, 0); + if (rval) { + dev_err(&client->dev, + "media_entity_init failed\n"); + goto out_nvm_release; + } + + rval = media_entity_create_link(&this->sd.entity, + this->source_pad, + &last->sd.entity, + last->sink_pad, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (rval) { + dev_err(&client->dev, + "media_entity_create_link failed\n"); + goto out_nvm_release; + } + + rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev, + &this->sd); + if (rval) { + dev_err(&client->dev, + "v4l2_device_register_subdev failed\n"); + goto out_nvm_release; + } + + last = this; + } + + dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile); + + sensor->pixel_array->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + + /* final steps */ + smiapp_read_frame_fmt(sensor); + rval = smiapp_init_controls(sensor); + if (rval < 0) + goto out_nvm_release; + + /* prepare PLL configuration input values */ + pll->bus_type = SMIAPP_PLL_BUS_TYPE_CSI2; + pll->csi2.lanes = sensor->platform_data->lanes; + pll->ext_clk_freq_hz = sensor->platform_data->ext_clk; + /* Profile 0 sensors have no separate OP clock branch. */ + if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) + pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS; + if (smiapp_needs_quirk(sensor, + SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE)) + pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE; + pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + + rval = smiapp_update_mode(sensor); + if (rval) { + dev_err(&client->dev, "update mode failed\n"); + goto out_nvm_release; + } + + sensor->streaming = false; + sensor->dev_init_done = true; + + /* check flash capability */ + rval = smiapp_read(sensor, SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, &tmp); + sensor->flash_capability = tmp; + if (rval) + goto out_nvm_release; + + smiapp_power_off(sensor); + + return 0; + +out_nvm_release: + device_remove_file(&client->dev, &dev_attr_nvm); + +out_ident_release: + device_remove_file(&client->dev, &dev_attr_ident); + +out_power_off: + smiapp_power_off(sensor); + +out_smiapp_power_on: + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_free(sensor->platform_data->xshutdown); + + return rval; +} + +static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct smiapp_subdev *ssd = to_smiapp_subdev(sd); + struct smiapp_sensor *sensor = ssd->sensor; + u32 mbus_code = + smiapp_csi_data_formats[smiapp_pixel_order(sensor)].code; + unsigned int i; + + mutex_lock(&sensor->mutex); + + for (i = 0; i < ssd->npads; i++) { + struct v4l2_mbus_framefmt *try_fmt = + v4l2_subdev_get_try_format(fh, i); + struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(fh, i); + struct v4l2_rect *try_comp; + + try_fmt->width = sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; + try_fmt->height = sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; + try_fmt->code = mbus_code; + + try_crop->top = 0; + try_crop->left = 0; + try_crop->width = try_fmt->width; + try_crop->height = try_fmt->height; + + if (ssd != sensor->pixel_array) + continue; + + try_comp = v4l2_subdev_get_try_compose(fh, i); + *try_comp = *try_crop; + } + + mutex_unlock(&sensor->mutex); + + return smiapp_set_power(sd, 1); +} + +static int smiapp_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return smiapp_set_power(sd, 0); +} + +static const struct v4l2_subdev_video_ops smiapp_video_ops = { + .s_stream = smiapp_set_stream, +}; + +static const struct v4l2_subdev_core_ops smiapp_core_ops = { + .s_power = smiapp_set_power, +}; + +static const struct v4l2_subdev_pad_ops smiapp_pad_ops = { + .enum_mbus_code = smiapp_enum_mbus_code, + .get_fmt = smiapp_get_format, + .set_fmt = smiapp_set_format, + .get_selection = smiapp_get_selection, + .set_selection = smiapp_set_selection, +}; + +static const struct v4l2_subdev_sensor_ops smiapp_sensor_ops = { + .g_skip_frames = smiapp_get_skip_frames, +}; + +static const struct v4l2_subdev_ops smiapp_ops = { + .core = &smiapp_core_ops, + .video = &smiapp_video_ops, + .pad = &smiapp_pad_ops, + .sensor = &smiapp_sensor_ops, +}; + +static const struct media_entity_operations smiapp_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = { + .registered = smiapp_registered, + .open = smiapp_open, + .close = smiapp_close, +}; + +static const struct v4l2_subdev_internal_ops smiapp_internal_ops = { + .open = smiapp_open, + .close = smiapp_close, +}; + +/* ----------------------------------------------------------------------------- + * I2C Driver + */ + +#ifdef CONFIG_PM + +static int smiapp_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + bool streaming; + + BUG_ON(mutex_is_locked(&sensor->mutex)); + + if (sensor->power_count == 0) + return 0; + + if (sensor->streaming) + smiapp_stop_streaming(sensor); + + streaming = sensor->streaming; + + smiapp_power_off(sensor); + + /* save state for resume */ + sensor->streaming = streaming; + + return 0; +} + +static int smiapp_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int rval; + + if (sensor->power_count == 0) + return 0; + + rval = smiapp_power_on(sensor); + if (rval) + return rval; + + if (sensor->streaming) + rval = smiapp_start_streaming(sensor); + + return rval; +} + +#else + +#define smiapp_suspend NULL +#define smiapp_resume NULL + +#endif /* CONFIG_PM */ + +static int smiapp_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct smiapp_sensor *sensor; + + if (client->dev.platform_data == NULL) + return -ENODEV; + + sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) + return -ENOMEM; + + sensor->platform_data = client->dev.platform_data; + mutex_init(&sensor->mutex); + mutex_init(&sensor->power_mutex); + sensor->src = &sensor->ssds[sensor->ssds_used]; + + v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops); + sensor->src->sd.internal_ops = &smiapp_internal_src_ops; + sensor->src->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sensor->src->sensor = sensor; + + sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE; + return media_entity_init(&sensor->src->sd.entity, 2, + sensor->src->pads, 0); +} + +static int smiapp_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int i; + + if (sensor->power_count) { + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_set_value(sensor->platform_data->xshutdown, 0); + if (sensor->platform_data->set_xclk) + sensor->platform_data->set_xclk(&sensor->src->sd, 0); + else + clk_disable(sensor->ext_clk); + sensor->power_count = 0; + } + + device_remove_file(&client->dev, &dev_attr_ident); + if (sensor->nvm) + device_remove_file(&client->dev, &dev_attr_nvm); + + for (i = 0; i < sensor->ssds_used; i++) { + media_entity_cleanup(&sensor->ssds[i].sd.entity); + v4l2_device_unregister_subdev(&sensor->ssds[i].sd); + } + smiapp_free_controls(sensor); + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_free(sensor->platform_data->xshutdown); + + return 0; +} + +static const struct i2c_device_id smiapp_id_table[] = { + { SMIAPP_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, smiapp_id_table); + +static const struct dev_pm_ops smiapp_pm_ops = { + .suspend = smiapp_suspend, + .resume = smiapp_resume, +}; + +static struct i2c_driver smiapp_i2c_driver = { + .driver = { + .name = SMIAPP_NAME, + .pm = &smiapp_pm_ops, + }, + .probe = smiapp_probe, + .remove = smiapp_remove, + .id_table = smiapp_id_table, +}; + +module_i2c_driver(smiapp_i2c_driver); + +MODULE_AUTHOR("Sakari Ailus "); +MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/smiapp/smiapp-limits.c b/drivers/media/i2c/smiapp/smiapp-limits.c new file mode 100644 index 00000000..847cb235 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-limits.c @@ -0,0 +1,132 @@ +/* + * drivers/media/i2c/smiapp/smiapp-limits.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "smiapp.h" + +struct smiapp_reg_limits smiapp_reg_limits[] = { + { SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY, "analogue_gain_capability" }, /* 0 */ + { SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN, "analogue_gain_code_min" }, + { SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX, "analogue_gain_code_max" }, + { SMIAPP_REG_U8_THS_ZERO_MIN, "ths_zero_min" }, + { SMIAPP_REG_U8_TCLK_TRAIL_MIN, "tclk_trail_min" }, + { SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY, "integration_time_capability" }, /* 5 */ + { SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN, "coarse_integration_time_min" }, + { SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN, "coarse_integration_time_max_margin" }, + { SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN, "fine_integration_time_min" }, + { SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN, "fine_integration_time_max_margin" }, + { SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY, "digital_gain_capability" }, /* 10 */ + { SMIAPP_REG_U16_DIGITAL_GAIN_MIN, "digital_gain_min" }, + { SMIAPP_REG_U16_DIGITAL_GAIN_MAX, "digital_gain_max" }, + { SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ, "min_ext_clk_freq_hz" }, + { SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ, "max_ext_clk_freq_hz" }, + { SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV, "min_pre_pll_clk_div" }, /* 15 */ + { SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV, "max_pre_pll_clk_div" }, + { SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ, "min_pll_ip_freq_hz" }, + { SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ, "max_pll_ip_freq_hz" }, + { SMIAPP_REG_U16_MIN_PLL_MULTIPLIER, "min_pll_multiplier" }, + { SMIAPP_REG_U16_MAX_PLL_MULTIPLIER, "max_pll_multiplier" }, /* 20 */ + { SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ, "min_pll_op_freq_hz" }, + { SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ, "max_pll_op_freq_hz" }, + { SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV, "min_vt_sys_clk_div" }, + { SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV, "max_vt_sys_clk_div" }, + { SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ, "min_vt_sys_clk_freq_hz" }, /* 25 */ + { SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ, "max_vt_sys_clk_freq_hz" }, + { SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ, "min_vt_pix_clk_freq_hz" }, + { SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ, "max_vt_pix_clk_freq_hz" }, + { SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV, "min_vt_pix_clk_div" }, + { SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV, "max_vt_pix_clk_div" }, /* 30 */ + { SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES, "min_frame_length_lines" }, + { SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES, "max_frame_length_lines" }, + { SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK, "min_line_length_pck" }, + { SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK, "max_line_length_pck" }, + { SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK, "min_line_blanking_pck" }, /* 35 */ + { SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES, "min_frame_blanking_lines" }, + { SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE, "min_line_length_pck_step_size" }, + { SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV, "min_op_sys_clk_div" }, + { SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV, "max_op_sys_clk_div" }, + { SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ, "min_op_sys_clk_freq_hz" }, /* 40 */ + { SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ, "max_op_sys_clk_freq_hz" }, + { SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV, "min_op_pix_clk_div" }, + { SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV, "max_op_pix_clk_div" }, + { SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ, "min_op_pix_clk_freq_hz" }, + { SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ, "max_op_pix_clk_freq_hz" }, /* 45 */ + { SMIAPP_REG_U16_X_ADDR_MIN, "x_addr_min" }, + { SMIAPP_REG_U16_Y_ADDR_MIN, "y_addr_min" }, + { SMIAPP_REG_U16_X_ADDR_MAX, "x_addr_max" }, + { SMIAPP_REG_U16_Y_ADDR_MAX, "y_addr_max" }, + { SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE, "min_x_output_size" }, /* 50 */ + { SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE, "min_y_output_size" }, + { SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE, "max_x_output_size" }, + { SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE, "max_y_output_size" }, + { SMIAPP_REG_U16_MIN_EVEN_INC, "min_even_inc" }, + { SMIAPP_REG_U16_MAX_EVEN_INC, "max_even_inc" }, /* 55 */ + { SMIAPP_REG_U16_MIN_ODD_INC, "min_odd_inc" }, + { SMIAPP_REG_U16_MAX_ODD_INC, "max_odd_inc" }, + { SMIAPP_REG_U16_SCALING_CAPABILITY, "scaling_capability" }, + { SMIAPP_REG_U16_SCALER_M_MIN, "scaler_m_min" }, + { SMIAPP_REG_U16_SCALER_M_MAX, "scaler_m_max" }, /* 60 */ + { SMIAPP_REG_U16_SCALER_N_MIN, "scaler_n_min" }, + { SMIAPP_REG_U16_SCALER_N_MAX, "scaler_n_max" }, + { SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY, "spatial_sampling_capability" }, + { SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY, "digital_crop_capability" }, + { SMIAPP_REG_U16_COMPRESSION_CAPABILITY, "compression_capability" }, /* 65 */ + { SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY, "fifo_support_capability" }, + { SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY, "dphy_ctrl_capability" }, + { SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY, "csi_lane_mode_capability" }, + { SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY, "csi_signalling_mode_capability" }, + { SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY, "fast_standby_capability" }, /* 70 */ + { SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY, "cci_address_control_capability" }, + { SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS, "max_per_lane_bitrate_1_lane_mode_mbps" }, + { SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS, "max_per_lane_bitrate_2_lane_mode_mbps" }, + { SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS, "max_per_lane_bitrate_3_lane_mode_mbps" }, + { SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS, "max_per_lane_bitrate_4_lane_mode_mbps" }, /* 75 */ + { SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY, "temp_sensor_capability" }, + { SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN, "min_frame_length_lines_bin" }, + { SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN, "max_frame_length_lines_bin" }, + { SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN, "min_line_length_pck_bin" }, + { SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN, "max_line_length_pck_bin" }, /* 80 */ + { SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN, "min_line_blanking_pck_bin" }, + { SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN, "fine_integration_time_min_bin" }, + { SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, "fine_integration_time_max_margin_bin" }, + { SMIAPP_REG_U8_BINNING_CAPABILITY, "binning_capability" }, + { SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY, "binning_weighting_capability" }, /* 85 */ + { SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY, "data_transfer_if_capability" }, + { SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY, "shading_correction_capability" }, + { SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY, "green_imbalance_capability" }, + { SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY, "black_level_capability" }, + { SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY, "module_specific_correction_capability" }, /* 90 */ + { SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY, "defect_correction_capability" }, + { SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2, "defect_correction_capability_2" }, + { SMIAPP_REG_U8_EDOF_CAPABILITY, "edof_capability" }, + { SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY, "colour_feedback_capability" }, + { SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY, "estimation_mode_capability" }, /* 95 */ + { SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY, "estimation_zone_capability" }, + { SMIAPP_REG_U16_CAPABILITY_TRDY_MIN, "capability_trdy_min" }, + { SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, "flash_mode_capability" }, + { SMIAPP_REG_U8_ACTUATOR_CAPABILITY, "actuator_capability" }, + { SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1, "bracketing_lut_capability_1" }, /* 100 */ + { SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2, "bracketing_lut_capability_2" }, + { SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP, "analogue_gain_code_step" }, + { 0, NULL }, +}; diff --git a/drivers/media/i2c/smiapp/smiapp-limits.h b/drivers/media/i2c/smiapp/smiapp-limits.h new file mode 100644 index 00000000..343e9c38 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-limits.h @@ -0,0 +1,128 @@ +/* + * drivers/media/i2c/smiapp/smiapp-limits.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#define SMIAPP_LIMIT_ANALOGUE_GAIN_CAPABILITY 0 +#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN 1 +#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX 2 +#define SMIAPP_LIMIT_THS_ZERO_MIN 3 +#define SMIAPP_LIMIT_TCLK_TRAIL_MIN 4 +#define SMIAPP_LIMIT_INTEGRATION_TIME_CAPABILITY 5 +#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MIN 6 +#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN 7 +#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN 8 +#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN 9 +#define SMIAPP_LIMIT_DIGITAL_GAIN_CAPABILITY 10 +#define SMIAPP_LIMIT_DIGITAL_GAIN_MIN 11 +#define SMIAPP_LIMIT_DIGITAL_GAIN_MAX 12 +#define SMIAPP_LIMIT_MIN_EXT_CLK_FREQ_HZ 13 +#define SMIAPP_LIMIT_MAX_EXT_CLK_FREQ_HZ 14 +#define SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV 15 +#define SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV 16 +#define SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ 17 +#define SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ 18 +#define SMIAPP_LIMIT_MIN_PLL_MULTIPLIER 19 +#define SMIAPP_LIMIT_MAX_PLL_MULTIPLIER 20 +#define SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ 21 +#define SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ 22 +#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV 23 +#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV 24 +#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ 25 +#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ 26 +#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ 27 +#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ 28 +#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV 29 +#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV 30 +#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES 31 +#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES 32 +#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK 33 +#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK 34 +#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK 35 +#define SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES 36 +#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_STEP_SIZE 37 +#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV 38 +#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV 39 +#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ 40 +#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ 41 +#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV 42 +#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV 43 +#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ 44 +#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ 45 +#define SMIAPP_LIMIT_X_ADDR_MIN 46 +#define SMIAPP_LIMIT_Y_ADDR_MIN 47 +#define SMIAPP_LIMIT_X_ADDR_MAX 48 +#define SMIAPP_LIMIT_Y_ADDR_MAX 49 +#define SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE 50 +#define SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE 51 +#define SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE 52 +#define SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE 53 +#define SMIAPP_LIMIT_MIN_EVEN_INC 54 +#define SMIAPP_LIMIT_MAX_EVEN_INC 55 +#define SMIAPP_LIMIT_MIN_ODD_INC 56 +#define SMIAPP_LIMIT_MAX_ODD_INC 57 +#define SMIAPP_LIMIT_SCALING_CAPABILITY 58 +#define SMIAPP_LIMIT_SCALER_M_MIN 59 +#define SMIAPP_LIMIT_SCALER_M_MAX 60 +#define SMIAPP_LIMIT_SCALER_N_MIN 61 +#define SMIAPP_LIMIT_SCALER_N_MAX 62 +#define SMIAPP_LIMIT_SPATIAL_SAMPLING_CAPABILITY 63 +#define SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY 64 +#define SMIAPP_LIMIT_COMPRESSION_CAPABILITY 65 +#define SMIAPP_LIMIT_FIFO_SUPPORT_CAPABILITY 66 +#define SMIAPP_LIMIT_DPHY_CTRL_CAPABILITY 67 +#define SMIAPP_LIMIT_CSI_LANE_MODE_CAPABILITY 68 +#define SMIAPP_LIMIT_CSI_SIGNALLING_MODE_CAPABILITY 69 +#define SMIAPP_LIMIT_FAST_STANDBY_CAPABILITY 70 +#define SMIAPP_LIMIT_CCI_ADDRESS_CONTROL_CAPABILITY 71 +#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS 72 +#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS 73 +#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS 74 +#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS 75 +#define SMIAPP_LIMIT_TEMP_SENSOR_CAPABILITY 76 +#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN 77 +#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN 78 +#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN 79 +#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN 80 +#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN 81 +#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN 82 +#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN 83 +#define SMIAPP_LIMIT_BINNING_CAPABILITY 84 +#define SMIAPP_LIMIT_BINNING_WEIGHTING_CAPABILITY 85 +#define SMIAPP_LIMIT_DATA_TRANSFER_IF_CAPABILITY 86 +#define SMIAPP_LIMIT_SHADING_CORRECTION_CAPABILITY 87 +#define SMIAPP_LIMIT_GREEN_IMBALANCE_CAPABILITY 88 +#define SMIAPP_LIMIT_BLACK_LEVEL_CAPABILITY 89 +#define SMIAPP_LIMIT_MODULE_SPECIFIC_CORRECTION_CAPABILITY 90 +#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY 91 +#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY_2 92 +#define SMIAPP_LIMIT_EDOF_CAPABILITY 93 +#define SMIAPP_LIMIT_COLOUR_FEEDBACK_CAPABILITY 94 +#define SMIAPP_LIMIT_ESTIMATION_MODE_CAPABILITY 95 +#define SMIAPP_LIMIT_ESTIMATION_ZONE_CAPABILITY 96 +#define SMIAPP_LIMIT_CAPABILITY_TRDY_MIN 97 +#define SMIAPP_LIMIT_FLASH_MODE_CAPABILITY 98 +#define SMIAPP_LIMIT_ACTUATOR_CAPABILITY 99 +#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_1 100 +#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_2 101 +#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP 102 +#define SMIAPP_LIMIT_LAST 103 diff --git a/drivers/media/i2c/smiapp/smiapp-quirk.c b/drivers/media/i2c/smiapp/smiapp-quirk.c new file mode 100644 index 00000000..bb8c506e --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-quirk.c @@ -0,0 +1,286 @@ +/* + * drivers/media/i2c/smiapp/smiapp-quirk.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include + +#include "smiapp.h" + +static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val) +{ + return smiapp_write(sensor, (SMIA_REG_8BIT << 16) | reg, val); +} + +static int smiapp_write_8s(struct smiapp_sensor *sensor, + struct smiapp_reg_8 *regs, int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + + for (; len > 0; len--, regs++) { + rval = smiapp_write_8(sensor, regs->reg, regs->val); + if (rval < 0) { + dev_err(&client->dev, + "error %d writing reg 0x%4.4x, val 0x%2.2x", + rval, regs->reg, regs->val); + return rval; + } + } + + return 0; +} + +void smiapp_replace_limit(struct smiapp_sensor *sensor, + u32 limit, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + + dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n", + smiapp_reg_limits[limit].addr, + smiapp_reg_limits[limit].what, val, val); + sensor->limits[limit] = val; +} + +bool smiapp_quirk_reg(struct smiapp_sensor *sensor, + u32 reg, u32 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + const struct smia_reg *sreg; + + if (!sensor->minfo.quirk) + return false; + + sreg = sensor->minfo.quirk->regs; + + if (!sreg) + return false; + + while (sreg->type) { + u16 type = reg >> 16; + u16 reg16 = reg; + + if (sreg->type != type || sreg->reg != reg16) { + sreg++; + continue; + } + + switch ((u8)type) { + case SMIA_REG_8BIT: + dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%2.2x\n", + reg, sreg->val); + break; + case SMIA_REG_16BIT: + dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%4.4x\n", + reg, sreg->val); + break; + case SMIA_REG_32BIT: + dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%8.8x\n", + reg, sreg->val); + break; + } + + *val = sreg->val; + + return true; + } + + return false; +} + +static int jt8ew9_limits(struct smiapp_sensor *sensor) +{ + if (sensor->minfo.revision_number_major < 0x03) + sensor->frame_skip = 1; + + /* Below 24 gain doesn't have effect at all, */ + /* but ~59 is needed for full dynamic range */ + smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59); + smiapp_replace_limit( + sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000); + + return 0; +} + +static int jt8ew9_post_poweron(struct smiapp_sensor *sensor) +{ + struct smiapp_reg_8 regs[] = { + { 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */ + { 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */ + { 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */ + { 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */ + { 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */ + { 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */ + { 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */ + { 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */ + { 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */ + { 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */ + { 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */ + { 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */ + { 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */ + { 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */ + { 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */ + { 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */ + { 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */ + /* Taken from v03. No idea what the rest are. */ + { 0x32e0, 0x05 }, + { 0x32e1, 0x05 }, + { 0x32e2, 0x04 }, + { 0x32e5, 0x04 }, + { 0x32e6, 0x04 }, + + }; + + return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs)); +} + +const struct smiapp_quirk smiapp_jt8ew9_quirk = { + .limits = jt8ew9_limits, + .post_poweron = jt8ew9_post_poweron, +}; + +static int imx125es_post_poweron(struct smiapp_sensor *sensor) +{ + /* Taken from v02. No idea what the other two are. */ + struct smiapp_reg_8 regs[] = { + /* + * 0x3302: clk during frame blanking: + * 0x00 - HS mode, 0x01 - LP11 + */ + { 0x3302, 0x01 }, + { 0x302d, 0x00 }, + { 0x3b08, 0x8c }, + }; + + return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs)); +} + +const struct smiapp_quirk smiapp_imx125es_quirk = { + .post_poweron = imx125es_post_poweron, +}; + +static int jt8ev1_limits(struct smiapp_sensor *sensor) +{ + smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271); + smiapp_replace_limit(sensor, + SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184); + + return 0; +} + +static int jt8ev1_post_poweron(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + + struct smiapp_reg_8 regs[] = { + { 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */ + { 0x30a3, 0xd0 }, /* FLASH STROBE enable */ + { 0x3237, 0x00 }, /* For control of pulse timing for ADC */ + { 0x3238, 0x43 }, + { 0x3301, 0x06 }, /* For analog bias for sensor */ + { 0x3302, 0x06 }, + { 0x3304, 0x00 }, + { 0x3305, 0x88 }, + { 0x332a, 0x14 }, + { 0x332c, 0x6b }, + { 0x3336, 0x01 }, + { 0x333f, 0x1f }, + { 0x3355, 0x00 }, + { 0x3356, 0x20 }, + { 0x33bf, 0x20 }, /* Adjust the FBC speed */ + { 0x33c9, 0x20 }, + { 0x33ce, 0x30 }, /* Adjust the parameter for logic function */ + { 0x33cf, 0xec }, /* For Black sun */ + { 0x3328, 0x80 }, /* Ugh. No idea what's this. */ + }; + + struct smiapp_reg_8 regs_96[] = { + { 0x30ae, 0x00 }, /* For control of ADC clock */ + { 0x30af, 0xd0 }, + { 0x30b0, 0x01 }, + }; + + rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs)); + if (rval < 0) + return rval; + + switch (sensor->platform_data->ext_clk) { + case 9600000: + return smiapp_write_8s(sensor, regs_96, + ARRAY_SIZE(regs_96)); + default: + dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n", + sensor->platform_data->ext_clk); + return 0; + } +} + +static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor) +{ + return smiapp_write_8(sensor, 0x3328, 0x00); +} + +static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor) +{ + int rval; + + /* Workaround: allows fast standby to work properly */ + rval = smiapp_write_8(sensor, 0x3205, 0x04); + if (rval < 0) + return rval; + + /* Wait for 1 ms + one line => 2 ms is likely enough */ + usleep_range(2000, 2000); + + /* Restore it */ + rval = smiapp_write_8(sensor, 0x3205, 0x00); + if (rval < 0) + return rval; + + return smiapp_write_8(sensor, 0x3328, 0x80); +} + +const struct smiapp_quirk smiapp_jt8ev1_quirk = { + .limits = jt8ev1_limits, + .post_poweron = jt8ev1_post_poweron, + .pre_streamon = jt8ev1_pre_streamon, + .post_streamoff = jt8ev1_post_streamoff, + .flags = SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE, +}; + +static int tcm8500md_limits(struct smiapp_sensor *sensor) +{ + smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000); + + return 0; +} + +const struct smiapp_quirk smiapp_tcm8500md_quirk = { + .limits = tcm8500md_limits, +}; diff --git a/drivers/media/i2c/smiapp/smiapp-quirk.h b/drivers/media/i2c/smiapp/smiapp-quirk.h new file mode 100644 index 00000000..504a6d80 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-quirk.h @@ -0,0 +1,83 @@ +/* + * drivers/media/i2c/smiapp/smiapp-quirk.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __SMIAPP_QUIRK__ +#define __SMIAPP_QUIRK__ + +struct smiapp_sensor; + +/** + * struct smiapp_quirk - quirks for sensors that deviate from SMIA++ standard + * + * @limits: Replace sensor->limits with values which can't be read from + * sensor registers. Called the first time the sensor is powered up. + * @post_poweron: Called always after the sensor has been fully powered on. + * @pre_streamon: Called just before streaming is enabled. + * @post_streamon: Called right after stopping streaming. + */ +struct smiapp_quirk { + int (*limits)(struct smiapp_sensor *sensor); + int (*post_poweron)(struct smiapp_sensor *sensor); + int (*pre_streamon)(struct smiapp_sensor *sensor); + int (*post_streamoff)(struct smiapp_sensor *sensor); + const struct smia_reg *regs; + unsigned long flags; +}; + +/* op pix clock is for all lanes in total normally */ +#define SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0) +#define SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY (1 << 1) + +struct smiapp_reg_8 { + u16 reg; + u8 val; +}; + +void smiapp_replace_limit(struct smiapp_sensor *sensor, + u32 limit, u32 val); +bool smiapp_quirk_reg(struct smiapp_sensor *sensor, + u32 reg, u32 *val); + +#define SMIAPP_MK_QUIRK_REG(_reg, _val) \ + { \ + .type = (_reg >> 16), \ + .reg = (u16)_reg, \ + .val = _val, \ + } + +#define smiapp_call_quirk(_sensor, _quirk, ...) \ + (_sensor->minfo.quirk && \ + _sensor->minfo.quirk->_quirk ? \ + _sensor->minfo.quirk->_quirk(_sensor, ##__VA_ARGS__) : 0) + +#define smiapp_needs_quirk(_sensor, _quirk) \ + (_sensor->minfo.quirk ? \ + _sensor->minfo.quirk->flags & _quirk : 0) + +extern const struct smiapp_quirk smiapp_jt8ev1_quirk; +extern const struct smiapp_quirk smiapp_imx125es_quirk; +extern const struct smiapp_quirk smiapp_jt8ew9_quirk; +extern const struct smiapp_quirk smiapp_tcm8500md_quirk; + +#endif /* __SMIAPP_QUIRK__ */ diff --git a/drivers/media/i2c/smiapp/smiapp-reg-defs.h b/drivers/media/i2c/smiapp/smiapp-reg-defs.h new file mode 100644 index 00000000..3aa0ca94 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-reg-defs.h @@ -0,0 +1,503 @@ +/* + * drivers/media/i2c/smiapp/smiapp-reg-defs.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#define SMIAPP_REG_MK_U8(r) ((SMIA_REG_8BIT << 16) | (r)) +#define SMIAPP_REG_MK_U16(r) ((SMIA_REG_16BIT << 16) | (r)) +#define SMIAPP_REG_MK_U32(r) ((SMIA_REG_32BIT << 16) | (r)) + +#define SMIAPP_REG_MK_F32(r) (SMIA_REG_FLAG_FLOAT | (SMIA_REG_32BIT << 16) | (r)) + +#define SMIAPP_REG_U16_MODEL_ID SMIAPP_REG_MK_U16(0x0000) +#define SMIAPP_REG_U8_REVISION_NUMBER_MAJOR SMIAPP_REG_MK_U8(0x0002) +#define SMIAPP_REG_U8_MANUFACTURER_ID SMIAPP_REG_MK_U8(0x0003) +#define SMIAPP_REG_U8_SMIA_VERSION SMIAPP_REG_MK_U8(0x0004) +#define SMIAPP_REG_U8_FRAME_COUNT SMIAPP_REG_MK_U8(0x0005) +#define SMIAPP_REG_U8_PIXEL_ORDER SMIAPP_REG_MK_U8(0x0006) +#define SMIAPP_REG_U16_DATA_PEDESTAL SMIAPP_REG_MK_U16(0x0008) +#define SMIAPP_REG_U8_PIXEL_DEPTH SMIAPP_REG_MK_U8(0x000c) +#define SMIAPP_REG_U8_REVISION_NUMBER_MINOR SMIAPP_REG_MK_U8(0x0010) +#define SMIAPP_REG_U8_SMIAPP_VERSION SMIAPP_REG_MK_U8(0x0011) +#define SMIAPP_REG_U8_MODULE_DATE_YEAR SMIAPP_REG_MK_U8(0x0012) +#define SMIAPP_REG_U8_MODULE_DATE_MONTH SMIAPP_REG_MK_U8(0x0013) +#define SMIAPP_REG_U8_MODULE_DATE_DAY SMIAPP_REG_MK_U8(0x0014) +#define SMIAPP_REG_U8_MODULE_DATE_PHASE SMIAPP_REG_MK_U8(0x0015) +#define SMIAPP_REG_U16_SENSOR_MODEL_ID SMIAPP_REG_MK_U16(0x0016) +#define SMIAPP_REG_U8_SENSOR_REVISION_NUMBER SMIAPP_REG_MK_U8(0x0018) +#define SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID SMIAPP_REG_MK_U8(0x0019) +#define SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION SMIAPP_REG_MK_U8(0x001a) +#define SMIAPP_REG_U32_SERIAL_NUMBER SMIAPP_REG_MK_U32(0x001c) +#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE SMIAPP_REG_MK_U8(0x0040) +#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE SMIAPP_REG_MK_U8(0x0041) +#define SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(n) SMIAPP_REG_MK_U16(0x0042 + ((n) << 1)) /* 0 <= n <= 14 */ +#define SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(n) SMIAPP_REG_MK_U32(0x0060 + ((n) << 2)) /* 0 <= n <= 7 */ +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY SMIAPP_REG_MK_U16(0x0080) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN SMIAPP_REG_MK_U16(0x0084) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX SMIAPP_REG_MK_U16(0x0086) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP SMIAPP_REG_MK_U16(0x0088) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_TYPE SMIAPP_REG_MK_U16(0x008a) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_M0 SMIAPP_REG_MK_U16(0x008c) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_C0 SMIAPP_REG_MK_U16(0x008e) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_M1 SMIAPP_REG_MK_U16(0x0090) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_C1 SMIAPP_REG_MK_U16(0x0092) +#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE SMIAPP_REG_MK_U8(0x00c0) +#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_SUBTYPE SMIAPP_REG_MK_U8(0x00c1) +#define SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(n) SMIAPP_REG_MK_U16(0x00c2 + ((n) << 1)) +#define SMIAPP_REG_U8_MODE_SELECT SMIAPP_REG_MK_U8(0x0100) +#define SMIAPP_REG_U8_IMAGE_ORIENTATION SMIAPP_REG_MK_U8(0x0101) +#define SMIAPP_REG_U8_SOFTWARE_RESET SMIAPP_REG_MK_U8(0x0103) +#define SMIAPP_REG_U8_GROUPED_PARAMETER_HOLD SMIAPP_REG_MK_U8(0x0104) +#define SMIAPP_REG_U8_MASK_CORRUPTED_FRAMES SMIAPP_REG_MK_U8(0x0105) +#define SMIAPP_REG_U8_FAST_STANDBY_CTRL SMIAPP_REG_MK_U8(0x0106) +#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL SMIAPP_REG_MK_U8(0x0107) +#define SMIAPP_REG_U8_2ND_CCI_IF_CONTROL SMIAPP_REG_MK_U8(0x0108) +#define SMIAPP_REG_U8_2ND_CCI_ADDRESS_CONTROL SMIAPP_REG_MK_U8(0x0109) +#define SMIAPP_REG_U8_CSI_CHANNEL_IDENTIFIER SMIAPP_REG_MK_U8(0x0110) +#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE SMIAPP_REG_MK_U8(0x0111) +#define SMIAPP_REG_U16_CSI_DATA_FORMAT SMIAPP_REG_MK_U16(0x0112) +#define SMIAPP_REG_U8_CSI_LANE_MODE SMIAPP_REG_MK_U8(0x0114) +#define SMIAPP_REG_U8_CSI2_10_TO_8_DT SMIAPP_REG_MK_U8(0x0115) +#define SMIAPP_REG_U8_CSI2_10_TO_7_DT SMIAPP_REG_MK_U8(0x0116) +#define SMIAPP_REG_U8_CSI2_10_TO_6_DT SMIAPP_REG_MK_U8(0x0117) +#define SMIAPP_REG_U8_CSI2_12_TO_8_DT SMIAPP_REG_MK_U8(0x0118) +#define SMIAPP_REG_U8_CSI2_12_TO_7_DT SMIAPP_REG_MK_U8(0x0119) +#define SMIAPP_REG_U8_CSI2_12_TO_6_DT SMIAPP_REG_MK_U8(0x011a) +#define SMIAPP_REG_U8_CSI2_14_TO_10_DT SMIAPP_REG_MK_U8(0x011b) +#define SMIAPP_REG_U8_CSI2_14_TO_8_DT SMIAPP_REG_MK_U8(0x011c) +#define SMIAPP_REG_U8_CSI2_16_TO_10_DT SMIAPP_REG_MK_U8(0x011d) +#define SMIAPP_REG_U8_CSI2_16_TO_8_DT SMIAPP_REG_MK_U8(0x011e) +#define SMIAPP_REG_U8_GAIN_MODE SMIAPP_REG_MK_U8(0x0120) +#define SMIAPP_REG_U16_VANA_VOLTAGE SMIAPP_REG_MK_U16(0x0130) +#define SMIAPP_REG_U16_VDIG_VOLTAGE SMIAPP_REG_MK_U16(0x0132) +#define SMIAPP_REG_U16_VIO_VOLTAGE SMIAPP_REG_MK_U16(0x0134) +#define SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ SMIAPP_REG_MK_U16(0x0136) +#define SMIAPP_REG_U8_TEMP_SENSOR_CONTROL SMIAPP_REG_MK_U8(0x0138) +#define SMIAPP_REG_U8_TEMP_SENSOR_MODE SMIAPP_REG_MK_U8(0x0139) +#define SMIAPP_REG_U8_TEMP_SENSOR_OUTPUT SMIAPP_REG_MK_U8(0x013a) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME SMIAPP_REG_MK_U16(0x0200) +#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME SMIAPP_REG_MK_U16(0x0202) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL SMIAPP_REG_MK_U16(0x0204) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENR SMIAPP_REG_MK_U16(0x0206) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_RED SMIAPP_REG_MK_U16(0x0208) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_BLUE SMIAPP_REG_MK_U16(0x020a) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENB SMIAPP_REG_MK_U16(0x020c) +#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENR SMIAPP_REG_MK_U16(0x020e) +#define SMIAPP_REG_U16_DIGITAL_GAIN_RED SMIAPP_REG_MK_U16(0x0210) +#define SMIAPP_REG_U16_DIGITAL_GAIN_BLUE SMIAPP_REG_MK_U16(0x0212) +#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENB SMIAPP_REG_MK_U16(0x0214) +#define SMIAPP_REG_U16_VT_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x0300) +#define SMIAPP_REG_U16_VT_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x0302) +#define SMIAPP_REG_U16_PRE_PLL_CLK_DIV SMIAPP_REG_MK_U16(0x0304) +#define SMIAPP_REG_U16_PLL_MULTIPLIER SMIAPP_REG_MK_U16(0x0306) +#define SMIAPP_REG_U16_OP_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x0308) +#define SMIAPP_REG_U16_OP_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x030a) +#define SMIAPP_REG_U16_FRAME_LENGTH_LINES SMIAPP_REG_MK_U16(0x0340) +#define SMIAPP_REG_U16_LINE_LENGTH_PCK SMIAPP_REG_MK_U16(0x0342) +#define SMIAPP_REG_U16_X_ADDR_START SMIAPP_REG_MK_U16(0x0344) +#define SMIAPP_REG_U16_Y_ADDR_START SMIAPP_REG_MK_U16(0x0346) +#define SMIAPP_REG_U16_X_ADDR_END SMIAPP_REG_MK_U16(0x0348) +#define SMIAPP_REG_U16_Y_ADDR_END SMIAPP_REG_MK_U16(0x034a) +#define SMIAPP_REG_U16_X_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x034c) +#define SMIAPP_REG_U16_Y_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x034e) +#define SMIAPP_REG_U16_X_EVEN_INC SMIAPP_REG_MK_U16(0x0380) +#define SMIAPP_REG_U16_X_ODD_INC SMIAPP_REG_MK_U16(0x0382) +#define SMIAPP_REG_U16_Y_EVEN_INC SMIAPP_REG_MK_U16(0x0384) +#define SMIAPP_REG_U16_Y_ODD_INC SMIAPP_REG_MK_U16(0x0386) +#define SMIAPP_REG_U16_SCALING_MODE SMIAPP_REG_MK_U16(0x0400) +#define SMIAPP_REG_U16_SPATIAL_SAMPLING SMIAPP_REG_MK_U16(0x0402) +#define SMIAPP_REG_U16_SCALE_M SMIAPP_REG_MK_U16(0x0404) +#define SMIAPP_REG_U16_SCALE_N SMIAPP_REG_MK_U16(0x0406) +#define SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET SMIAPP_REG_MK_U16(0x0408) +#define SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET SMIAPP_REG_MK_U16(0x040a) +#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH SMIAPP_REG_MK_U16(0x040c) +#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT SMIAPP_REG_MK_U16(0x040e) +#define SMIAPP_REG_U16_COMPRESSION_MODE SMIAPP_REG_MK_U16(0x0500) +#define SMIAPP_REG_U16_TEST_PATTERN_MODE SMIAPP_REG_MK_U16(0x0600) +#define SMIAPP_REG_U16_TEST_DATA_RED SMIAPP_REG_MK_U16(0x0602) +#define SMIAPP_REG_U16_TEST_DATA_GREENR SMIAPP_REG_MK_U16(0x0604) +#define SMIAPP_REG_U16_TEST_DATA_BLUE SMIAPP_REG_MK_U16(0x0606) +#define SMIAPP_REG_U16_TEST_DATA_GREENB SMIAPP_REG_MK_U16(0x0608) +#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_WIDTH SMIAPP_REG_MK_U16(0x060a) +#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_POSITION SMIAPP_REG_MK_U16(0x060c) +#define SMIAPP_REG_U16_VERTICAL_CURSOR_WIDTH SMIAPP_REG_MK_U16(0x060e) +#define SMIAPP_REG_U16_VERTICAL_CURSOR_POSITION SMIAPP_REG_MK_U16(0x0610) +#define SMIAPP_REG_U16_FIFO_WATER_MARK_PIXELS SMIAPP_REG_MK_U16(0x0700) +#define SMIAPP_REG_U8_TCLK_POST SMIAPP_REG_MK_U8(0x0800) +#define SMIAPP_REG_U8_THS_PREPARE SMIAPP_REG_MK_U8(0x0801) +#define SMIAPP_REG_U8_THS_ZERO_MIN SMIAPP_REG_MK_U8(0x0802) +#define SMIAPP_REG_U8_THS_TRAIL SMIAPP_REG_MK_U8(0x0803) +#define SMIAPP_REG_U8_TCLK_TRAIL_MIN SMIAPP_REG_MK_U8(0x0804) +#define SMIAPP_REG_U8_TCLK_PREPARE SMIAPP_REG_MK_U8(0x0805) +#define SMIAPP_REG_U8_TCLK_ZERO SMIAPP_REG_MK_U8(0x0806) +#define SMIAPP_REG_U8_TLPX SMIAPP_REG_MK_U8(0x0807) +#define SMIAPP_REG_U8_DPHY_CTRL SMIAPP_REG_MK_U8(0x0808) +#define SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS SMIAPP_REG_MK_U32(0x0820) +#define SMIAPP_REG_U8_BINNING_MODE SMIAPP_REG_MK_U8(0x0900) +#define SMIAPP_REG_U8_BINNING_TYPE SMIAPP_REG_MK_U8(0x0901) +#define SMIAPP_REG_U8_BINNING_WEIGHTING SMIAPP_REG_MK_U8(0x0902) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL SMIAPP_REG_MK_U8(0x0a00) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS SMIAPP_REG_MK_U8(0x0a01) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT SMIAPP_REG_MK_U8(0x0a02) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 SMIAPP_REG_MK_U8(0x0a04) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_1 SMIAPP_REG_MK_U8(0x0a05) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_2 SMIAPP_REG_MK_U8(0x0a06) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_3 SMIAPP_REG_MK_U8(0x0a07) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_4 SMIAPP_REG_MK_U8(0x0a08) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_5 SMIAPP_REG_MK_U8(0x0a09) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_12 SMIAPP_REG_MK_U8(0x0a10) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_13 SMIAPP_REG_MK_U8(0x0a11) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_14 SMIAPP_REG_MK_U8(0x0a12) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_15 SMIAPP_REG_MK_U8(0x0a13) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_16 SMIAPP_REG_MK_U8(0x0a14) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_17 SMIAPP_REG_MK_U8(0x0a15) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_18 SMIAPP_REG_MK_U8(0x0a16) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_19 SMIAPP_REG_MK_U8(0x0a17) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_20 SMIAPP_REG_MK_U8(0x0a18) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_21 SMIAPP_REG_MK_U8(0x0a19) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_22 SMIAPP_REG_MK_U8(0x0a1a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_23 SMIAPP_REG_MK_U8(0x0a1b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_24 SMIAPP_REG_MK_U8(0x0a1c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_25 SMIAPP_REG_MK_U8(0x0a1d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_26 SMIAPP_REG_MK_U8(0x0a1e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_27 SMIAPP_REG_MK_U8(0x0a1f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_28 SMIAPP_REG_MK_U8(0x0a20) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_29 SMIAPP_REG_MK_U8(0x0a21) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_30 SMIAPP_REG_MK_U8(0x0a22) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_31 SMIAPP_REG_MK_U8(0x0a23) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_32 SMIAPP_REG_MK_U8(0x0a24) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_33 SMIAPP_REG_MK_U8(0x0a25) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_34 SMIAPP_REG_MK_U8(0x0a26) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_35 SMIAPP_REG_MK_U8(0x0a27) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_36 SMIAPP_REG_MK_U8(0x0a28) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_37 SMIAPP_REG_MK_U8(0x0a29) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_38 SMIAPP_REG_MK_U8(0x0a2a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_39 SMIAPP_REG_MK_U8(0x0a2b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_40 SMIAPP_REG_MK_U8(0x0a2c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_41 SMIAPP_REG_MK_U8(0x0a2d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_42 SMIAPP_REG_MK_U8(0x0a2e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_43 SMIAPP_REG_MK_U8(0x0a2f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_44 SMIAPP_REG_MK_U8(0x0a30) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_45 SMIAPP_REG_MK_U8(0x0a31) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_46 SMIAPP_REG_MK_U8(0x0a32) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_47 SMIAPP_REG_MK_U8(0x0a33) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_48 SMIAPP_REG_MK_U8(0x0a34) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_49 SMIAPP_REG_MK_U8(0x0a35) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_50 SMIAPP_REG_MK_U8(0x0a36) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_51 SMIAPP_REG_MK_U8(0x0a37) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_52 SMIAPP_REG_MK_U8(0x0a38) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_53 SMIAPP_REG_MK_U8(0x0a39) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_54 SMIAPP_REG_MK_U8(0x0a3a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_55 SMIAPP_REG_MK_U8(0x0a3b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_56 SMIAPP_REG_MK_U8(0x0a3c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_57 SMIAPP_REG_MK_U8(0x0a3d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_58 SMIAPP_REG_MK_U8(0x0a3e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_59 SMIAPP_REG_MK_U8(0x0a3f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_60 SMIAPP_REG_MK_U8(0x0a40) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_61 SMIAPP_REG_MK_U8(0x0a41) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_62 SMIAPP_REG_MK_U8(0x0a42) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_63 SMIAPP_REG_MK_U8(0x0a43) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_CTRL SMIAPP_REG_MK_U8(0x0a44) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_STATUS SMIAPP_REG_MK_U8(0x0a45) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_PAGE_SELECT SMIAPP_REG_MK_U8(0x0a46) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_0 SMIAPP_REG_MK_U8(0x0a48) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_1 SMIAPP_REG_MK_U8(0x0a49) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_2 SMIAPP_REG_MK_U8(0x0a4a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_3 SMIAPP_REG_MK_U8(0x0a4b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_4 SMIAPP_REG_MK_U8(0x0a4c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_5 SMIAPP_REG_MK_U8(0x0a4d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_6 SMIAPP_REG_MK_U8(0x0a4e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_7 SMIAPP_REG_MK_U8(0x0a4f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_8 SMIAPP_REG_MK_U8(0x0a50) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_9 SMIAPP_REG_MK_U8(0x0a51) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_10 SMIAPP_REG_MK_U8(0x0a52) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_11 SMIAPP_REG_MK_U8(0x0a53) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_12 SMIAPP_REG_MK_U8(0x0a54) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_13 SMIAPP_REG_MK_U8(0x0a55) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_14 SMIAPP_REG_MK_U8(0x0a56) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_15 SMIAPP_REG_MK_U8(0x0a57) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_16 SMIAPP_REG_MK_U8(0x0a58) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_17 SMIAPP_REG_MK_U8(0x0a59) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_18 SMIAPP_REG_MK_U8(0x0a5a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_19 SMIAPP_REG_MK_U8(0x0a5b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_20 SMIAPP_REG_MK_U8(0x0a5c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_21 SMIAPP_REG_MK_U8(0x0a5d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_22 SMIAPP_REG_MK_U8(0x0a5e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_23 SMIAPP_REG_MK_U8(0x0a5f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_24 SMIAPP_REG_MK_U8(0x0a60) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_25 SMIAPP_REG_MK_U8(0x0a61) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_26 SMIAPP_REG_MK_U8(0x0a62) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_27 SMIAPP_REG_MK_U8(0x0a63) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_28 SMIAPP_REG_MK_U8(0x0a64) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_29 SMIAPP_REG_MK_U8(0x0a65) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_30 SMIAPP_REG_MK_U8(0x0a66) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_31 SMIAPP_REG_MK_U8(0x0a67) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_32 SMIAPP_REG_MK_U8(0x0a68) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_33 SMIAPP_REG_MK_U8(0x0a69) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_34 SMIAPP_REG_MK_U8(0x0a6a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_35 SMIAPP_REG_MK_U8(0x0a6b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_36 SMIAPP_REG_MK_U8(0x0a6c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_37 SMIAPP_REG_MK_U8(0x0a6d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_38 SMIAPP_REG_MK_U8(0x0a6e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_39 SMIAPP_REG_MK_U8(0x0a6f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_40 SMIAPP_REG_MK_U8(0x0a70) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_41 SMIAPP_REG_MK_U8(0x0a71) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_42 SMIAPP_REG_MK_U8(0x0a72) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_43 SMIAPP_REG_MK_U8(0x0a73) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_44 SMIAPP_REG_MK_U8(0x0a74) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_45 SMIAPP_REG_MK_U8(0x0a75) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_46 SMIAPP_REG_MK_U8(0x0a76) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_47 SMIAPP_REG_MK_U8(0x0a77) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_48 SMIAPP_REG_MK_U8(0x0a78) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_49 SMIAPP_REG_MK_U8(0x0a79) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_50 SMIAPP_REG_MK_U8(0x0a7a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_51 SMIAPP_REG_MK_U8(0x0a7b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_52 SMIAPP_REG_MK_U8(0x0a7c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_53 SMIAPP_REG_MK_U8(0x0a7d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_54 SMIAPP_REG_MK_U8(0x0a7e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_55 SMIAPP_REG_MK_U8(0x0a7f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_56 SMIAPP_REG_MK_U8(0x0a80) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_57 SMIAPP_REG_MK_U8(0x0a81) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_58 SMIAPP_REG_MK_U8(0x0a82) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_59 SMIAPP_REG_MK_U8(0x0a83) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_60 SMIAPP_REG_MK_U8(0x0a84) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_61 SMIAPP_REG_MK_U8(0x0a85) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_62 SMIAPP_REG_MK_U8(0x0a86) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_63 SMIAPP_REG_MK_U8(0x0a87) +#define SMIAPP_REG_U8_SHADING_CORRECTION_ENABLE SMIAPP_REG_MK_U8(0x0b00) +#define SMIAPP_REG_U8_LUMINANCE_CORRECTION_LEVEL SMIAPP_REG_MK_U8(0x0b01) +#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_ENABLE SMIAPP_REG_MK_U8(0x0b02) +#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_WEIGHT SMIAPP_REG_MK_U8(0x0b03) +#define SMIAPP_REG_U8_BLACK_LEVEL_CORRECTION_ENABLE SMIAPP_REG_MK_U8(0x0b04) +#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b05) +#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b06) +#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_WEIGHT SMIAPP_REG_MK_U8(0x0b07) +#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b08) +#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_WEIGHT SMIAPP_REG_MK_U8(0x0b09) +#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b0a) +#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_WEIGHT SMIAPP_REG_MK_U8(0x0b0b) +#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_ENABLE SMIAPP_REG_MK_U8(0x0b0c) +#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_WEIGHT SMIAPP_REG_MK_U8(0x0b0d) +#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b0e) +#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b0f) +#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b10) +#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b11) +#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b12) +#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b13) +#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b14) +#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b15) +#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b16) +#define SMIAPP_REG_U8_EDOF_MODE SMIAPP_REG_MK_U8(0x0b80) +#define SMIAPP_REG_U8_SHARPNESS SMIAPP_REG_MK_U8(0x0b83) +#define SMIAPP_REG_U8_DENOISING SMIAPP_REG_MK_U8(0x0b84) +#define SMIAPP_REG_U8_MODULE_SPECIFIC SMIAPP_REG_MK_U8(0x0b85) +#define SMIAPP_REG_U16_DEPTH_OF_FIELD SMIAPP_REG_MK_U16(0x0b86) +#define SMIAPP_REG_U16_FOCUS_DISTANCE SMIAPP_REG_MK_U16(0x0b88) +#define SMIAPP_REG_U8_ESTIMATION_MODE_CTRL SMIAPP_REG_MK_U8(0x0b8a) +#define SMIAPP_REG_U16_COLOUR_TEMPERATURE SMIAPP_REG_MK_U16(0x0b8c) +#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENR SMIAPP_REG_MK_U16(0x0b8e) +#define SMIAPP_REG_U16_ABSOLUTE_GAIN_RED SMIAPP_REG_MK_U16(0x0b90) +#define SMIAPP_REG_U16_ABSOLUTE_GAIN_BLUE SMIAPP_REG_MK_U16(0x0b92) +#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENB SMIAPP_REG_MK_U16(0x0b94) +#define SMIAPP_REG_U8_ESTIMATION_ZONE_MODE SMIAPP_REG_MK_U8(0x0bc0) +#define SMIAPP_REG_U16_FIXED_ZONE_WEIGHTING SMIAPP_REG_MK_U16(0x0bc2) +#define SMIAPP_REG_U16_CUSTOM_ZONE_X_START SMIAPP_REG_MK_U16(0x0bc4) +#define SMIAPP_REG_U16_CUSTOM_ZONE_Y_START SMIAPP_REG_MK_U16(0x0bc6) +#define SMIAPP_REG_U16_CUSTOM_ZONE_WIDTH SMIAPP_REG_MK_U16(0x0bc8) +#define SMIAPP_REG_U16_CUSTOM_ZONE_HEIGHT SMIAPP_REG_MK_U16(0x0bca) +#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL1 SMIAPP_REG_MK_U8(0x0c00) +#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL2 SMIAPP_REG_MK_U8(0x0c01) +#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_1 SMIAPP_REG_MK_U8(0x0c02) +#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_2 SMIAPP_REG_MK_U8(0x0c03) +#define SMIAPP_REG_U16_TRDY_CTRL SMIAPP_REG_MK_U16(0x0c04) +#define SMIAPP_REG_U16_TRDOUT_CTRL SMIAPP_REG_MK_U16(0x0c06) +#define SMIAPP_REG_U16_TSHUTTER_STROBE_DELAY_CTRL SMIAPP_REG_MK_U16(0x0c08) +#define SMIAPP_REG_U16_TSHUTTER_STROBE_WIDTH_CTRL SMIAPP_REG_MK_U16(0x0c0a) +#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_CTRL SMIAPP_REG_MK_U16(0x0c0c) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_CTRL SMIAPP_REG_MK_U16(0x0c0e) +#define SMIAPP_REG_U16_TGRST_INTERVAL_CTRL SMIAPP_REG_MK_U16(0x0c10) +#define SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT SMIAPP_REG_MK_U8(0x0c12) +#define SMIAPP_REG_U16_FLASH_STROBE_START_POINT SMIAPP_REG_MK_U16(0x0c14) +#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL SMIAPP_REG_MK_U16(0x0c16) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL SMIAPP_REG_MK_U16(0x0c18) +#define SMIAPP_REG_U8_FLASH_MODE_RS SMIAPP_REG_MK_U8(0x0c1a) +#define SMIAPP_REG_U8_FLASH_TRIGGER_RS SMIAPP_REG_MK_U8(0x0c1b) +#define SMIAPP_REG_U8_FLASH_STATUS SMIAPP_REG_MK_U8(0x0c1c) +#define SMIAPP_REG_U8_SA_STROBE_MODE SMIAPP_REG_MK_U8(0x0c1d) +#define SMIAPP_REG_U16_SA_STROBE_START_POINT SMIAPP_REG_MK_U16(0x0c1e) +#define SMIAPP_REG_U16_TSA_STROBE_DELAY_CTRL SMIAPP_REG_MK_U16(0x0c20) +#define SMIAPP_REG_U16_TSA_STROBE_WIDTH_CTRL SMIAPP_REG_MK_U16(0x0c22) +#define SMIAPP_REG_U8_SA_STROBE_TRIGGER SMIAPP_REG_MK_U8(0x0c24) +#define SMIAPP_REG_U8_SPECIAL_ACTUATOR_STATUS SMIAPP_REG_MK_U8(0x0c25) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_RS_CTRL SMIAPP_REG_MK_U16(0x0c26) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_RS_CTRL SMIAPP_REG_MK_U16(0x0c28) +#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_RS_CTRL SMIAPP_REG_MK_U8(0x0c2a) +#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_CTRL SMIAPP_REG_MK_U8(0x0c2b) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_CTRL SMIAPP_REG_MK_U16(0x0c2c) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_CTRL SMIAPP_REG_MK_U16(0x0c2e) +#define SMIAPP_REG_U8_LOW_LEVEL_CTRL SMIAPP_REG_MK_U8(0x0c80) +#define SMIAPP_REG_U16_MAIN_TRIGGER_REF_POINT SMIAPP_REG_MK_U16(0x0c82) +#define SMIAPP_REG_U16_MAIN_TRIGGER_T3 SMIAPP_REG_MK_U16(0x0c84) +#define SMIAPP_REG_U8_MAIN_TRIGGER_COUNT SMIAPP_REG_MK_U8(0x0c86) +#define SMIAPP_REG_U16_PHASE1_TRIGGER_T3 SMIAPP_REG_MK_U16(0x0c88) +#define SMIAPP_REG_U8_PHASE1_TRIGGER_COUNT SMIAPP_REG_MK_U8(0x0c8a) +#define SMIAPP_REG_U16_PHASE2_TRIGGER_T3 SMIAPP_REG_MK_U16(0x0c8c) +#define SMIAPP_REG_U8_PHASE2_TRIGGER_COUNT SMIAPP_REG_MK_U8(0x0c8e) +#define SMIAPP_REG_U8_MECH_SHUTTER_CTRL SMIAPP_REG_MK_U8(0x0d00) +#define SMIAPP_REG_U8_OPERATION_MODE SMIAPP_REG_MK_U8(0x0d01) +#define SMIAPP_REG_U8_ACT_STATE1 SMIAPP_REG_MK_U8(0x0d02) +#define SMIAPP_REG_U8_ACT_STATE2 SMIAPP_REG_MK_U8(0x0d03) +#define SMIAPP_REG_U16_FOCUS_CHANGE SMIAPP_REG_MK_U16(0x0d80) +#define SMIAPP_REG_U16_FOCUS_CHANGE_CONTROL SMIAPP_REG_MK_U16(0x0d82) +#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE1 SMIAPP_REG_MK_U16(0x0d84) +#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE2 SMIAPP_REG_MK_U16(0x0d86) +#define SMIAPP_REG_U8_STROBE_COUNT_PHASE1 SMIAPP_REG_MK_U8(0x0d88) +#define SMIAPP_REG_U8_STROBE_COUNT_PHASE2 SMIAPP_REG_MK_U8(0x0d89) +#define SMIAPP_REG_U8_POSITION SMIAPP_REG_MK_U8(0x0d8a) +#define SMIAPP_REG_U8_BRACKETING_LUT_CONTROL SMIAPP_REG_MK_U8(0x0e00) +#define SMIAPP_REG_U8_BRACKETING_LUT_MODE SMIAPP_REG_MK_U8(0x0e01) +#define SMIAPP_REG_U8_BRACKETING_LUT_ENTRY_CONTROL SMIAPP_REG_MK_U8(0x0e02) +#define SMIAPP_REG_U8_LUT_PARAMETERS_START SMIAPP_REG_MK_U8(0x0e10) +#define SMIAPP_REG_U8_LUT_PARAMETERS_END SMIAPP_REG_MK_U8(0x0eff) +#define SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY SMIAPP_REG_MK_U16(0x1000) +#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN SMIAPP_REG_MK_U16(0x1004) +#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN SMIAPP_REG_MK_U16(0x1006) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN SMIAPP_REG_MK_U16(0x1008) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN SMIAPP_REG_MK_U16(0x100a) +#define SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY SMIAPP_REG_MK_U16(0x1080) +#define SMIAPP_REG_U16_DIGITAL_GAIN_MIN SMIAPP_REG_MK_U16(0x1084) +#define SMIAPP_REG_U16_DIGITAL_GAIN_MAX SMIAPP_REG_MK_U16(0x1086) +#define SMIAPP_REG_U16_DIGITAL_GAIN_STEP_SIZE SMIAPP_REG_MK_U16(0x1088) +#define SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1100) +#define SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1104) +#define SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV SMIAPP_REG_MK_U16(0x1108) +#define SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV SMIAPP_REG_MK_U16(0x110a) +#define SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ SMIAPP_REG_MK_F32(0x110c) +#define SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ SMIAPP_REG_MK_F32(0x1110) +#define SMIAPP_REG_U16_MIN_PLL_MULTIPLIER SMIAPP_REG_MK_U16(0x1114) +#define SMIAPP_REG_U16_MAX_PLL_MULTIPLIER SMIAPP_REG_MK_U16(0x1116) +#define SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ SMIAPP_REG_MK_F32(0x1118) +#define SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ SMIAPP_REG_MK_F32(0x111c) +#define SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x1120) +#define SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x1122) +#define SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1124) +#define SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1128) +#define SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x112c) +#define SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1130) +#define SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x1134) +#define SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x1136) +#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES SMIAPP_REG_MK_U16(0x1140) +#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES SMIAPP_REG_MK_U16(0x1142) +#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK SMIAPP_REG_MK_U16(0x1144) +#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK SMIAPP_REG_MK_U16(0x1146) +#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK SMIAPP_REG_MK_U16(0x1148) +#define SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES SMIAPP_REG_MK_U16(0x114a) +#define SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE SMIAPP_REG_MK_U8(0x114c) +#define SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x1160) +#define SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x1162) +#define SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1164) +#define SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1168) +#define SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x116c) +#define SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x116e) +#define SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1170) +#define SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1174) +#define SMIAPP_REG_U16_X_ADDR_MIN SMIAPP_REG_MK_U16(0x1180) +#define SMIAPP_REG_U16_Y_ADDR_MIN SMIAPP_REG_MK_U16(0x1182) +#define SMIAPP_REG_U16_X_ADDR_MAX SMIAPP_REG_MK_U16(0x1184) +#define SMIAPP_REG_U16_Y_ADDR_MAX SMIAPP_REG_MK_U16(0x1186) +#define SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x1188) +#define SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x118a) +#define SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x118c) +#define SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x118e) +#define SMIAPP_REG_U16_MIN_EVEN_INC SMIAPP_REG_MK_U16(0x11c0) +#define SMIAPP_REG_U16_MAX_EVEN_INC SMIAPP_REG_MK_U16(0x11c2) +#define SMIAPP_REG_U16_MIN_ODD_INC SMIAPP_REG_MK_U16(0x11c4) +#define SMIAPP_REG_U16_MAX_ODD_INC SMIAPP_REG_MK_U16(0x11c6) +#define SMIAPP_REG_U16_SCALING_CAPABILITY SMIAPP_REG_MK_U16(0x1200) +#define SMIAPP_REG_U16_SCALER_M_MIN SMIAPP_REG_MK_U16(0x1204) +#define SMIAPP_REG_U16_SCALER_M_MAX SMIAPP_REG_MK_U16(0x1206) +#define SMIAPP_REG_U16_SCALER_N_MIN SMIAPP_REG_MK_U16(0x1208) +#define SMIAPP_REG_U16_SCALER_N_MAX SMIAPP_REG_MK_U16(0x120a) +#define SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY SMIAPP_REG_MK_U16(0x120c) +#define SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY SMIAPP_REG_MK_U8(0x120e) +#define SMIAPP_REG_U16_COMPRESSION_CAPABILITY SMIAPP_REG_MK_U16(0x1300) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINRED SMIAPP_REG_MK_U16(0x1400) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINRED SMIAPP_REG_MK_U16(0x1402) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINRED SMIAPP_REG_MK_U16(0x1404) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINGREEN SMIAPP_REG_MK_U16(0x1406) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINGREEN SMIAPP_REG_MK_U16(0x1408) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINGREEN SMIAPP_REG_MK_U16(0x140a) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINBLUE SMIAPP_REG_MK_U16(0x140c) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINBLUE SMIAPP_REG_MK_U16(0x140e) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINBLUE SMIAPP_REG_MK_U16(0x1410) +#define SMIAPP_REG_U16_FIFO_SIZE_PIXELS SMIAPP_REG_MK_U16(0x1500) +#define SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY SMIAPP_REG_MK_U8(0x1502) +#define SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY SMIAPP_REG_MK_U8(0x1600) +#define SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY SMIAPP_REG_MK_U8(0x1601) +#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY SMIAPP_REG_MK_U8(0x1602) +#define SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY SMIAPP_REG_MK_U8(0x1603) +#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY SMIAPP_REG_MK_U8(0x1604) +#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS SMIAPP_REG_MK_U32(0x1608) +#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS SMIAPP_REG_MK_U32(0x160c) +#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS SMIAPP_REG_MK_U32(0x1610) +#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS SMIAPP_REG_MK_U32(0x1614) +#define SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY SMIAPP_REG_MK_U8(0x1618) +#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN SMIAPP_REG_MK_U16(0x1700) +#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN SMIAPP_REG_MK_U16(0x1702) +#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN SMIAPP_REG_MK_U16(0x1704) +#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN SMIAPP_REG_MK_U16(0x1706) +#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN SMIAPP_REG_MK_U16(0x1708) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN SMIAPP_REG_MK_U16(0x170a) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN SMIAPP_REG_MK_U16(0x170c) +#define SMIAPP_REG_U8_BINNING_CAPABILITY SMIAPP_REG_MK_U8(0x1710) +#define SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY SMIAPP_REG_MK_U8(0x1711) +#define SMIAPP_REG_U8_BINNING_SUBTYPES SMIAPP_REG_MK_U8(0x1712) +#define SMIAPP_REG_U8_BINNING_TYPE_n(n) SMIAPP_REG_MK_U8(0x1713 + (n)) /* 1 <= n <= 237 */ +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY SMIAPP_REG_MK_U8(0x1800) +#define SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY SMIAPP_REG_MK_U8(0x1900) +#define SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY SMIAPP_REG_MK_U8(0x1901) +#define SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY SMIAPP_REG_MK_U8(0x1902) +#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY SMIAPP_REG_MK_U8(0x1903) +#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY SMIAPP_REG_MK_U16(0x1904) +#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2 SMIAPP_REG_MK_U16(0x1906) +#define SMIAPP_REG_U8_EDOF_CAPABILITY SMIAPP_REG_MK_U8(0x1980) +#define SMIAPP_REG_U8_ESTIMATION_FRAMES SMIAPP_REG_MK_U8(0x1981) +#define SMIAPP_REG_U8_SUPPORTS_SHARPNESS_ADJ SMIAPP_REG_MK_U8(0x1982) +#define SMIAPP_REG_U8_SUPPORTS_DENOISING_ADJ SMIAPP_REG_MK_U8(0x1983) +#define SMIAPP_REG_U8_SUPPORTS_MODULE_SPECIFIC_ADJ SMIAPP_REG_MK_U8(0x1984) +#define SMIAPP_REG_U8_SUPPORTS_DEPTH_OF_FIELD_ADJ SMIAPP_REG_MK_U8(0x1985) +#define SMIAPP_REG_U8_SUPPORTS_FOCUS_DISTANCE_ADJ SMIAPP_REG_MK_U8(0x1986) +#define SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY SMIAPP_REG_MK_U8(0x1987) +#define SMIAPP_REG_U8_EDOF_SUPPORT_AB_NXM SMIAPP_REG_MK_U8(0x1988) +#define SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY SMIAPP_REG_MK_U8(0x19c0) +#define SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY SMIAPP_REG_MK_U8(0x19c1) +#define SMIAPP_REG_U16_EST_DEPTH_OF_FIELD SMIAPP_REG_MK_U16(0x19c2) +#define SMIAPP_REG_U16_EST_FOCUS_DISTANCE SMIAPP_REG_MK_U16(0x19c4) +#define SMIAPP_REG_U16_CAPABILITY_TRDY_MIN SMIAPP_REG_MK_U16(0x1a00) +#define SMIAPP_REG_U8_FLASH_MODE_CAPABILITY SMIAPP_REG_MK_U8(0x1a02) +#define SMIAPP_REG_U16_MECH_SHUT_AND_ACT_START_ADDR SMIAPP_REG_MK_U16(0x1b02) +#define SMIAPP_REG_U8_ACTUATOR_CAPABILITY SMIAPP_REG_MK_U8(0x1b04) +#define SMIAPP_REG_U16_ACTUATOR_TYPE SMIAPP_REG_MK_U16(0x1b40) +#define SMIAPP_REG_U8_AF_DEVICE_ADDRESS SMIAPP_REG_MK_U8(0x1b42) +#define SMIAPP_REG_U16_FOCUS_CHANGE_ADDRESS SMIAPP_REG_MK_U16(0x1b44) +#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1 SMIAPP_REG_MK_U8(0x1c00) +#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2 SMIAPP_REG_MK_U8(0x1c01) +#define SMIAPP_REG_U8_BRACKETING_LUT_SIZE SMIAPP_REG_MK_U8(0x1c02) diff --git a/drivers/media/i2c/smiapp/smiapp-reg.h b/drivers/media/i2c/smiapp/smiapp-reg.h new file mode 100644 index 00000000..b0dcbb8f --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-reg.h @@ -0,0 +1,122 @@ +/* + * drivers/media/i2c/smiapp/smiapp-reg.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __SMIAPP_REG_H_ +#define __SMIAPP_REG_H_ + +#include "smiapp-reg-defs.h" + +/* Bits for above register */ +#define SMIAPP_IMAGE_ORIENTATION_HFLIP (1 << 0) +#define SMIAPP_IMAGE_ORIENTATION_VFLIP (1 << 1) + +#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN (1 << 0) +#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN (0 << 1) +#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN (1 << 1) +#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR (1 << 2) +#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY (1 << 0) +#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY (1 << 1) +#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA (1 << 2) +#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE (1 << 3) + +#define SMIAPP_SOFTWARE_RESET (1 << 0) + +#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE (1 << 0) +#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE (1 << 1) + +#define SMIAPP_DPHY_CTRL_AUTOMATIC 0 +/* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */ +#define SMIAPP_DPHY_CTRL_UI 1 +#define SMIAPP_DPHY_CTRL_REGISTER 2 + +#define SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR 1 +#define SMIAPP_COMPRESSION_MODE_ADVANCED_PREDICTOR 2 + +#define SMIAPP_MODE_SELECT_SOFTWARE_STANDBY 0 +#define SMIAPP_MODE_SELECT_STREAMING 1 + +#define SMIAPP_SCALING_MODE_NONE 0 +#define SMIAPP_SCALING_MODE_HORIZONTAL 1 +#define SMIAPP_SCALING_MODE_BOTH 2 + +#define SMIAPP_SCALING_CAPABILITY_NONE 0 +#define SMIAPP_SCALING_CAPABILITY_HORIZONTAL 1 +#define SMIAPP_SCALING_CAPABILITY_BOTH 2 /* horizontal/both */ + +/* digital crop right before scaler */ +#define SMIAPP_DIGITAL_CROP_CAPABILITY_NONE 0 +#define SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP 1 + +#define SMIAPP_BINNING_CAPABILITY_NO 0 +#define SMIAPP_BINNING_CAPABILITY_YES 1 + +/* Maximum number of binning subtypes */ +#define SMIAPP_BINNING_SUBTYPES 253 + +#define SMIAPP_PIXEL_ORDER_GRBG 0 +#define SMIAPP_PIXEL_ORDER_RGGB 1 +#define SMIAPP_PIXEL_ORDER_BGGR 2 +#define SMIAPP_PIXEL_ORDER_GBRG 3 + +#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL 1 +#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED 2 +#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N 8 +#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N 16 + +#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE 0x01 +#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE 0x02 +#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK 0x0f +#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK 0xf0 +#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT 4 + +#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK 0xf000 +#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT 12 +#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK 0x0fff + +#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK 0xf0000000 +#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT 28 +#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK 0x0000ffff + +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED 1 +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY 2 +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK 3 +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK 4 +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE 5 + +#define SMIAPP_FAST_STANDBY_CTRL_COMPLETE_FRAMES 0 +#define SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE 1 + +/* Scaling N factor */ +#define SMIAPP_SCALE_N 16 + +/* Image statistics registers */ +/* Registers 0x2000 to 0x2fff are reserved for future + * use for statistics features. + */ + +/* Manufacturer Specific Registers: 0x3000 to 0x3fff + * The manufacturer specifies these as a black box. + */ + +#endif /* __SMIAPP_REG_H_ */ diff --git a/drivers/media/i2c/smiapp/smiapp-regs.c b/drivers/media/i2c/smiapp/smiapp-regs.c new file mode 100644 index 00000000..4fac32cf --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-regs.c @@ -0,0 +1,273 @@ +/* + * drivers/media/i2c/smiapp/smiapp-regs.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include "smiapp.h" +#include "smiapp-regs.h" + +static uint32_t float_to_u32_mul_1000000(struct i2c_client *client, + uint32_t phloat) +{ + int32_t exp; + uint64_t man; + + if (phloat >= 0x80000000) { + dev_err(&client->dev, "this is a negative number\n"); + return 0; + } + + if (phloat == 0x7f800000) + return ~0; /* Inf. */ + + if ((phloat & 0x7f800000) == 0x7f800000) { + dev_err(&client->dev, "NaN or other special number\n"); + return 0; + } + + /* Valid cases begin here */ + if (phloat == 0) + return 0; /* Valid zero */ + + if (phloat > 0x4f800000) + return ~0; /* larger than 4294967295 */ + + /* + * Unbias exponent (note how phloat is now guaranteed to + * have 0 in the high bit) + */ + exp = ((int32_t)phloat >> 23) - 127; + + /* Extract mantissa, add missing '1' bit and it's in MHz */ + man = ((phloat & 0x7fffff) | 0x800000) * 1000000ULL; + + if (exp < 0) + man >>= -exp; + else + man <<= exp; + + man >>= 23; /* Remove mantissa bias */ + + return man & 0xffffffff; +} + + +/* + * Read a 8/16/32-bit i2c register. The value is returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int ____smiapp_read(struct smiapp_sensor *sensor, u16 reg, + u16 len, u32 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + struct i2c_msg msg; + unsigned char data[4]; + u16 offset = reg; + int r; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2; + msg.buf = data; + + /* high byte goes out first */ + data[0] = (u8) (offset >> 8); + data[1] = (u8) offset; + r = i2c_transfer(client->adapter, &msg, 1); + if (r != 1) { + if (r >= 0) + r = -EBUSY; + goto err; + } + + msg.len = len; + msg.flags = I2C_M_RD; + r = i2c_transfer(client->adapter, &msg, 1); + if (r != 1) { + if (r >= 0) + r = -EBUSY; + goto err; + } + + *val = 0; + /* high byte comes first */ + switch (len) { + case SMIA_REG_32BIT: + *val = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) + + data[3]; + break; + case SMIA_REG_16BIT: + *val = (data[0] << 8) + data[1]; + break; + case SMIA_REG_8BIT: + *val = data[0]; + break; + default: + BUG(); + } + + return 0; + +err: + dev_err(&client->dev, "read from offset 0x%x error %d\n", offset, r); + + return r; +} + +/* Read a register using 8-bit access only. */ +static int ____smiapp_read_8only(struct smiapp_sensor *sensor, u16 reg, + u16 len, u32 *val) +{ + unsigned int i; + int rval; + + *val = 0; + + for (i = 0; i < len; i++) { + u32 val8; + + rval = ____smiapp_read(sensor, reg + i, 1, &val8); + if (rval < 0) + return rval; + *val |= val8 << ((len - i - 1) << 3); + } + + return 0; +} + +/* + * Read a 8/16/32-bit i2c register. The value is returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int __smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val, + bool only8) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int len = (u8)(reg >> 16); + int rval; + + if (len != SMIA_REG_8BIT && len != SMIA_REG_16BIT + && len != SMIA_REG_32BIT) + return -EINVAL; + + if (smiapp_quirk_reg(sensor, reg, val)) + goto found_quirk; + + if (len == SMIA_REG_8BIT && !only8) + rval = ____smiapp_read(sensor, (u16)reg, len, val); + else + rval = ____smiapp_read_8only(sensor, (u16)reg, len, val); + if (rval < 0) + return rval; + +found_quirk: + if (reg & SMIA_REG_FLAG_FLOAT) + *val = float_to_u32_mul_1000000(client, *val); + + return 0; +} + +int smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val) +{ + return __smiapp_read( + sensor, reg, val, + smiapp_needs_quirk(sensor, + SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY)); +} + +int smiapp_read_8only(struct smiapp_sensor *sensor, u32 reg, u32 *val) +{ + return __smiapp_read(sensor, reg, val, true); +} + +/* + * Write to a 8/16-bit register. + * Returns zero if successful, or non-zero otherwise. + */ +int smiapp_write(struct smiapp_sensor *sensor, u32 reg, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + struct i2c_msg msg; + unsigned char data[6]; + unsigned int retries; + unsigned int flags = reg >> 24; + unsigned int len = (u8)(reg >> 16); + u16 offset = reg; + int r; + + if ((len != SMIA_REG_8BIT && len != SMIA_REG_16BIT && + len != SMIA_REG_32BIT) || flags) + return -EINVAL; + + msg.addr = client->addr; + msg.flags = 0; /* Write */ + msg.len = 2 + len; + msg.buf = data; + + /* high byte goes out first */ + data[0] = (u8) (reg >> 8); + data[1] = (u8) (reg & 0xff); + + switch (len) { + case SMIA_REG_8BIT: + data[2] = val; + break; + case SMIA_REG_16BIT: + data[2] = val >> 8; + data[3] = val; + break; + case SMIA_REG_32BIT: + data[2] = val >> 24; + data[3] = val >> 16; + data[4] = val >> 8; + data[5] = val; + break; + default: + BUG(); + } + + for (retries = 0; retries < 5; retries++) { + /* + * Due to unknown reason sensor stops responding. This + * loop is a temporaty solution until the root cause + * is found. + */ + r = i2c_transfer(client->adapter, &msg, 1); + if (r == 1) { + if (retries) + dev_err(&client->dev, + "sensor i2c stall encountered. " + "retries: %d\n", retries); + return 0; + } + + usleep_range(2000, 2000); + } + + dev_err(&client->dev, + "wrote 0x%x to offset 0x%x error %d\n", val, offset, r); + + return r; +} diff --git a/drivers/media/i2c/smiapp/smiapp-regs.h b/drivers/media/i2c/smiapp/smiapp-regs.h new file mode 100644 index 00000000..eefc6c84 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-regs.h @@ -0,0 +1,49 @@ +/* + * include/media/smiapp/smiapp-regs.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef SMIAPP_REGS_H +#define SMIAPP_REGS_H + +#include +#include + +/* Use upper 8 bits of the type field for flags */ +#define SMIA_REG_FLAG_FLOAT (1 << 24) + +#define SMIA_REG_8BIT 1 +#define SMIA_REG_16BIT 2 +#define SMIA_REG_32BIT 4 +struct smia_reg { + u16 type; + u16 reg; /* 16-bit offset */ + u32 val; /* 8/16/32-bit value */ +}; + +struct smiapp_sensor; + +int smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val); +int smiapp_read_8only(struct smiapp_sensor *sensor, u32 reg, u32 *val); +int smiapp_write(struct smiapp_sensor *sensor, u32 reg, u32 val); + +#endif diff --git a/drivers/media/i2c/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h new file mode 100644 index 00000000..7cc5aae6 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp.h @@ -0,0 +1,252 @@ +/* + * drivers/media/i2c/smiapp/smiapp.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2010--2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __SMIAPP_PRIV_H_ +#define __SMIAPP_PRIV_H_ + +#include +#include +#include +#include + +#include "smiapp-pll.h" +#include "smiapp-reg.h" +#include "smiapp-regs.h" +#include "smiapp-quirk.h" + +/* + * Standard SMIA++ constants + */ +#define SMIA_VERSION_1 10 +#define SMIAPP_VERSION_0_8 8 /* Draft 0.8 */ +#define SMIAPP_VERSION_0_9 9 /* Draft 0.9 */ +#define SMIAPP_VERSION_1 10 + +#define SMIAPP_PROFILE_0 0 +#define SMIAPP_PROFILE_1 1 +#define SMIAPP_PROFILE_2 2 + +#define SMIAPP_NVM_PAGE_SIZE 64 /* bytes */ + +#define SMIAPP_RESET_DELAY_CLOCKS 2400 +#define SMIAPP_RESET_DELAY(clk) \ + (1000 + (SMIAPP_RESET_DELAY_CLOCKS * 1000 \ + + (clk) / 1000 - 1) / ((clk) / 1000)) + +#include "smiapp-limits.h" + +struct smiapp_quirk; + +#define SMIAPP_MODULE_IDENT_FLAG_REV_LE (1 << 0) + +struct smiapp_module_ident { + u8 manufacturer_id; + u16 model_id; + u8 revision_number_major; + + u8 flags; + + char *name; + const struct smiapp_quirk *quirk; +}; + +struct smiapp_module_info { + u32 manufacturer_id; + u32 model_id; + u32 revision_number_major; + u32 revision_number_minor; + + u32 module_year; + u32 module_month; + u32 module_day; + + u32 sensor_manufacturer_id; + u32 sensor_model_id; + u32 sensor_revision_number; + u32 sensor_firmware_version; + + u32 smia_version; + u32 smiapp_version; + + u32 smiapp_profile; + + char *name; + const struct smiapp_quirk *quirk; +}; + +#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = fl, \ + .name = _name, \ + .quirk = _quirk, } + +#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \ + .name = _name, \ + .quirk = _quirk, } + +#define SMIAPP_IDENT_L(manufacturer, model, rev, _name) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \ + .name = _name, } + +#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = 0, \ + .name = _name, \ + .quirk = _quirk, } + +#define SMIAPP_IDENT(manufacturer, model, rev, _name) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = 0, \ + .name = _name, } + +struct smiapp_reg_limits { + u32 addr; + char *what; +}; + +extern struct smiapp_reg_limits smiapp_reg_limits[]; + +struct smiapp_csi_data_format { + u32 code; + u8 width; + u8 compressed; + u8 pixel_order; +}; + +#define SMIAPP_SUBDEVS 3 + +#define SMIAPP_PA_PAD_SRC 0 +#define SMIAPP_PAD_SINK 0 +#define SMIAPP_PAD_SRC 1 +#define SMIAPP_PADS 2 + +struct smiapp_binning_subtype { + u8 horizontal:4; + u8 vertical:4; +} __packed; + +struct smiapp_subdev { + struct v4l2_subdev sd; + struct media_pad pads[2]; + struct v4l2_rect sink_fmt; + struct v4l2_rect crop[2]; + struct v4l2_rect compose; /* compose on sink */ + unsigned short sink_pad; + unsigned short source_pad; + int npads; + struct smiapp_sensor *sensor; + struct v4l2_ctrl_handler ctrl_handler; +}; + +/* + * struct smiapp_sensor - Main device structure + */ +struct smiapp_sensor { + /* + * "mutex" is used to serialise access to all fields here + * except v4l2_ctrls at the end of the struct. "mutex" is also + * used to serialise access to file handle specific + * information. The exception to this rule is the power_mutex + * below. + */ + struct mutex mutex; + /* + * power_mutex is used to serialise power management related + * activities. Acquiring "mutex" at that time isn't necessary + * since there are no other users anyway. + */ + struct mutex power_mutex; + struct smiapp_subdev ssds[SMIAPP_SUBDEVS]; + u32 ssds_used; + struct smiapp_subdev *src; + struct smiapp_subdev *binner; + struct smiapp_subdev *scaler; + struct smiapp_subdev *pixel_array; + struct smiapp_platform_data *platform_data; + struct regulator *vana; + struct clk *ext_clk; + u32 limits[SMIAPP_LIMIT_LAST]; + u8 nbinning_subtypes; + struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES]; + u32 mbus_frame_fmts; + const struct smiapp_csi_data_format *csi_format; + const struct smiapp_csi_data_format *internal_csi_format; + u32 default_mbus_frame_fmts; + int default_pixel_order; + + u8 binning_horizontal; + u8 binning_vertical; + + u8 scale_m; + u8 scaling_mode; + + u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */ + u8 flash_capability; + u8 frame_skip; + + int power_count; + + bool streaming; + bool dev_init_done; + + u8 *nvm; /* nvm memory buffer */ + unsigned int nvm_size; /* bytes */ + + struct smiapp_module_info minfo; + + struct smiapp_pll pll; + + /* Pixel array controls */ + struct v4l2_ctrl *analog_gain; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *vblank; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *pixel_rate_parray; + /* src controls */ + struct v4l2_ctrl *link_freq; + struct v4l2_ctrl *pixel_rate_csi; +}; + +#define to_smiapp_subdev(_sd) \ + container_of(_sd, struct smiapp_subdev, sd) + +#define to_smiapp_sensor(_sd) \ + (to_smiapp_subdev(_sd)->sensor) + +#endif /* __SMIAPP_PRIV_H_ */ diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig new file mode 100644 index 00000000..23d352f0 --- /dev/null +++ b/drivers/media/i2c/soc_camera/Kconfig @@ -0,0 +1,87 @@ +comment "soc_camera sensor drivers" + +config SOC_CAMERA_IMX074 + tristate "imx074 support" + depends on SOC_CAMERA && I2C + help + This driver supports IMX074 cameras from Sony + +config SOC_CAMERA_MT9M001 + tristate "mt9m001 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config SOC_CAMERA_MT9M111 + tristate "mt9m111, mt9m112 and mt9m131 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9M111, MT9M112 and MT9M131 cameras from + Micron/Aptina + +config SOC_CAMERA_MT9T031 + tristate "mt9t031 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9T031 cameras from Micron. + +config SOC_CAMERA_MT9T112 + tristate "mt9t112 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9T112 cameras from Aptina. + +config SOC_CAMERA_MT9V022 + tristate "mt9v022 and mt9v024 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9V022 cameras from Micron + +config SOC_CAMERA_OV2640 + tristate "ov2640 camera support" + depends on SOC_CAMERA && I2C + help + This is a ov2640 camera driver + +config SOC_CAMERA_OV5642 + tristate "ov5642 camera support" + depends on SOC_CAMERA && I2C + help + This is a V4L2 camera driver for the OmniVision OV5642 sensor + +config SOC_CAMERA_OV6650 + tristate "ov6650 sensor support" + depends on SOC_CAMERA && I2C + ---help--- + This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor + +config SOC_CAMERA_OV772X + tristate "ov772x camera support" + depends on SOC_CAMERA && I2C + help + This is a ov772x camera driver + +config SOC_CAMERA_OV9640 + tristate "ov9640 camera support" + depends on SOC_CAMERA && I2C + help + This is a ov9640 camera driver + +config SOC_CAMERA_OV9740 + tristate "ov9740 camera support" + depends on SOC_CAMERA && I2C + help + This is a ov9740 camera driver + +config SOC_CAMERA_RJ54N1 + tristate "rj54n1cb0c support" + depends on SOC_CAMERA && I2C + help + This is a rj54n1cb0c video driver + +config SOC_CAMERA_TW9910 + tristate "tw9910 support" + depends on SOC_CAMERA && I2C + help + This is a tw9910 video driver diff --git a/drivers/media/i2c/soc_camera/Makefile b/drivers/media/i2c/soc_camera/Makefile new file mode 100644 index 00000000..d0421fea --- /dev/null +++ b/drivers/media/i2c/soc_camera/Makefile @@ -0,0 +1,14 @@ +obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o +obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o +obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o +obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o +obj-$(CONFIG_SOC_CAMERA_MT9T112) += mt9t112.o +obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o +obj-$(CONFIG_SOC_CAMERA_OV2640) += ov2640.o +obj-$(CONFIG_SOC_CAMERA_OV5642) += ov5642.o +obj-$(CONFIG_SOC_CAMERA_OV6650) += ov6650.o +obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o +obj-$(CONFIG_SOC_CAMERA_OV9640) += ov9640.o +obj-$(CONFIG_SOC_CAMERA_OV9740) += ov9740.o +obj-$(CONFIG_SOC_CAMERA_RJ54N1) += rj54n1cb0c.o +obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o diff --git a/drivers/media/i2c/soc_camera/imx074.c b/drivers/media/i2c/soc_camera/imx074.c new file mode 100644 index 00000000..a2a5cbbd --- /dev/null +++ b/drivers/media/i2c/soc_camera/imx074.c @@ -0,0 +1,486 @@ +/* + * Driver for IMX074 CMOS Image Sensor from Sony + * + * Copyright (C) 2010, Guennadi Liakhovetski + * + * Partially inspired by the IMX074 driver from the Android / MSM tree + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* IMX074 registers */ + +#define MODE_SELECT 0x0100 +#define IMAGE_ORIENTATION 0x0101 +#define GROUPED_PARAMETER_HOLD 0x0104 + +/* Integration Time */ +#define COARSE_INTEGRATION_TIME_HI 0x0202 +#define COARSE_INTEGRATION_TIME_LO 0x0203 +/* Gain */ +#define ANALOGUE_GAIN_CODE_GLOBAL_HI 0x0204 +#define ANALOGUE_GAIN_CODE_GLOBAL_LO 0x0205 + +/* PLL registers */ +#define PRE_PLL_CLK_DIV 0x0305 +#define PLL_MULTIPLIER 0x0307 +#define PLSTATIM 0x302b +#define VNDMY_ABLMGSHLMT 0x300a +#define Y_OPBADDR_START_DI 0x3014 +/* mode setting */ +#define FRAME_LENGTH_LINES_HI 0x0340 +#define FRAME_LENGTH_LINES_LO 0x0341 +#define LINE_LENGTH_PCK_HI 0x0342 +#define LINE_LENGTH_PCK_LO 0x0343 +#define YADDR_START 0x0347 +#define YADDR_END 0x034b +#define X_OUTPUT_SIZE_MSB 0x034c +#define X_OUTPUT_SIZE_LSB 0x034d +#define Y_OUTPUT_SIZE_MSB 0x034e +#define Y_OUTPUT_SIZE_LSB 0x034f +#define X_EVEN_INC 0x0381 +#define X_ODD_INC 0x0383 +#define Y_EVEN_INC 0x0385 +#define Y_ODD_INC 0x0387 + +#define HMODEADD 0x3001 +#define VMODEADD 0x3016 +#define VAPPLINE_START 0x3069 +#define VAPPLINE_END 0x306b +#define SHUTTER 0x3086 +#define HADDAVE 0x30e8 +#define LANESEL 0x3301 + +/* IMX074 supported geometry */ +#define IMX074_WIDTH 1052 +#define IMX074_HEIGHT 780 + +/* IMX074 has only one fixed colorspace per pixelcode */ +struct imx074_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +struct imx074 { + struct v4l2_subdev subdev; + const struct imx074_datafmt *fmt; +}; + +static const struct imx074_datafmt imx074_colour_fmts[] = { + {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, +}; + +static struct imx074 *to_imx074(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct imx074, subdev); +} + +/* Find a data format by a pixel code in an array */ +static const struct imx074_datafmt *imx074_find_datafmt(enum v4l2_mbus_pixelcode code) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(imx074_colour_fmts); i++) + if (imx074_colour_fmts[i].code == code) + return imx074_colour_fmts + i; + + return NULL; +} + +static int reg_write(struct i2c_client *client, const u16 addr, const u8 data) +{ + struct i2c_adapter *adap = client->adapter; + struct i2c_msg msg; + unsigned char tx[3]; + int ret; + + msg.addr = client->addr; + msg.buf = tx; + msg.len = 3; + msg.flags = 0; + + tx[0] = addr >> 8; + tx[1] = addr & 0xff; + tx[2] = data; + + ret = i2c_transfer(adap, &msg, 1); + + mdelay(2); + + return ret == 1 ? 0 : -EIO; +} + +static int reg_read(struct i2c_client *client, const u16 addr) +{ + u8 buf[2] = {addr >> 8, addr & 0xff}; + int ret; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = 2, + .buf = buf, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 2, + .buf = buf, + }, + }; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) { + dev_warn(&client->dev, "Reading register %x from %x failed\n", + addr, client->addr); + return ret; + } + + return buf[0] & 0xff; /* no sign-extension */ +} + +static int imx074_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + const struct imx074_datafmt *fmt = imx074_find_datafmt(mf->code); + + dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code); + + if (!fmt) { + mf->code = imx074_colour_fmts[0].code; + mf->colorspace = imx074_colour_fmts[0].colorspace; + } + + mf->width = IMX074_WIDTH; + mf->height = IMX074_HEIGHT; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int imx074_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct imx074 *priv = to_imx074(client); + + dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code); + + /* MIPI CSI could have changed the format, double-check */ + if (!imx074_find_datafmt(mf->code)) + return -EINVAL; + + imx074_try_fmt(sd, mf); + + priv->fmt = imx074_find_datafmt(mf->code); + + return 0; +} + +static int imx074_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct imx074 *priv = to_imx074(client); + + const struct imx074_datafmt *fmt = priv->fmt; + + mf->code = fmt->code; + mf->colorspace = fmt->colorspace; + mf->width = IMX074_WIDTH; + mf->height = IMX074_HEIGHT; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int imx074_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct v4l2_rect *rect = &a->c; + + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + rect->top = 0; + rect->left = 0; + rect->width = IMX074_WIDTH; + rect->height = IMX074_HEIGHT; + + return 0; +} + +static int imx074_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = IMX074_WIDTH; + a->bounds.height = IMX074_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int imx074_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if ((unsigned int)index >= ARRAY_SIZE(imx074_colour_fmts)) + return -EINVAL; + + *code = imx074_colour_fmts[index].code; + return 0; +} + +static int imx074_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* MODE_SELECT: stream or standby */ + return reg_write(client, MODE_SELECT, !!enable); +} + +static int imx074_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = V4L2_IDENT_IMX074; + id->revision = 0; + + return 0; +} + +static int imx074_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +static int imx074_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + cfg->type = V4L2_MBUS_CSI2; + cfg->flags = V4L2_MBUS_CSI2_2_LANE | + V4L2_MBUS_CSI2_CHANNEL_0 | + V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; + + return 0; +} + +static struct v4l2_subdev_video_ops imx074_subdev_video_ops = { + .s_stream = imx074_s_stream, + .s_mbus_fmt = imx074_s_fmt, + .g_mbus_fmt = imx074_g_fmt, + .try_mbus_fmt = imx074_try_fmt, + .enum_mbus_fmt = imx074_enum_fmt, + .g_crop = imx074_g_crop, + .cropcap = imx074_cropcap, + .g_mbus_config = imx074_g_mbus_config, +}; + +static struct v4l2_subdev_core_ops imx074_subdev_core_ops = { + .g_chip_ident = imx074_g_chip_ident, + .s_power = imx074_s_power, +}; + +static struct v4l2_subdev_ops imx074_subdev_ops = { + .core = &imx074_subdev_core_ops, + .video = &imx074_subdev_video_ops, +}; + +static int imx074_video_probe(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + int ret; + u16 id; + + ret = imx074_s_power(subdev, 1); + if (ret < 0) + return ret; + + /* Read sensor Model ID */ + ret = reg_read(client, 0); + if (ret < 0) + goto done; + + id = ret << 8; + + ret = reg_read(client, 1); + if (ret < 0) + goto done; + + id |= ret; + + dev_info(&client->dev, "Chip ID 0x%04x detected\n", id); + + if (id != 0x74) { + ret = -ENODEV; + goto done; + } + + /* PLL Setting EXTCLK=24MHz, 22.5times */ + reg_write(client, PLL_MULTIPLIER, 0x2D); + reg_write(client, PRE_PLL_CLK_DIV, 0x02); + reg_write(client, PLSTATIM, 0x4B); + + /* 2-lane mode */ + reg_write(client, 0x3024, 0x00); + + reg_write(client, IMAGE_ORIENTATION, 0x00); + + /* select RAW mode: + * 0x08+0x08 = top 8 bits + * 0x0a+0x08 = compressed 8-bits + * 0x0a+0x0a = 10 bits + */ + reg_write(client, 0x0112, 0x08); + reg_write(client, 0x0113, 0x08); + + /* Base setting for High frame mode */ + reg_write(client, VNDMY_ABLMGSHLMT, 0x80); + reg_write(client, Y_OPBADDR_START_DI, 0x08); + reg_write(client, 0x3015, 0x37); + reg_write(client, 0x301C, 0x01); + reg_write(client, 0x302C, 0x05); + reg_write(client, 0x3031, 0x26); + reg_write(client, 0x3041, 0x60); + reg_write(client, 0x3051, 0x24); + reg_write(client, 0x3053, 0x34); + reg_write(client, 0x3057, 0xC0); + reg_write(client, 0x305C, 0x09); + reg_write(client, 0x305D, 0x07); + reg_write(client, 0x3060, 0x30); + reg_write(client, 0x3065, 0x00); + reg_write(client, 0x30AA, 0x08); + reg_write(client, 0x30AB, 0x1C); + reg_write(client, 0x30B0, 0x32); + reg_write(client, 0x30B2, 0x83); + reg_write(client, 0x30D3, 0x04); + reg_write(client, 0x3106, 0x78); + reg_write(client, 0x310C, 0x82); + reg_write(client, 0x3304, 0x05); + reg_write(client, 0x3305, 0x04); + reg_write(client, 0x3306, 0x11); + reg_write(client, 0x3307, 0x02); + reg_write(client, 0x3308, 0x0C); + reg_write(client, 0x3309, 0x06); + reg_write(client, 0x330A, 0x08); + reg_write(client, 0x330B, 0x04); + reg_write(client, 0x330C, 0x08); + reg_write(client, 0x330D, 0x06); + reg_write(client, 0x330E, 0x01); + reg_write(client, 0x3381, 0x00); + + /* V : 1/2V-addition (1,3), H : 1/2H-averaging (1,3) -> Full HD */ + /* 1608 = 1560 + 48 (black lines) */ + reg_write(client, FRAME_LENGTH_LINES_HI, 0x06); + reg_write(client, FRAME_LENGTH_LINES_LO, 0x48); + reg_write(client, YADDR_START, 0x00); + reg_write(client, YADDR_END, 0x2F); + /* 0x838 == 2104 */ + reg_write(client, X_OUTPUT_SIZE_MSB, 0x08); + reg_write(client, X_OUTPUT_SIZE_LSB, 0x38); + /* 0x618 == 1560 */ + reg_write(client, Y_OUTPUT_SIZE_MSB, 0x06); + reg_write(client, Y_OUTPUT_SIZE_LSB, 0x18); + reg_write(client, X_EVEN_INC, 0x01); + reg_write(client, X_ODD_INC, 0x03); + reg_write(client, Y_EVEN_INC, 0x01); + reg_write(client, Y_ODD_INC, 0x03); + reg_write(client, HMODEADD, 0x00); + reg_write(client, VMODEADD, 0x16); + reg_write(client, VAPPLINE_START, 0x24); + reg_write(client, VAPPLINE_END, 0x53); + reg_write(client, SHUTTER, 0x00); + reg_write(client, HADDAVE, 0x80); + + reg_write(client, LANESEL, 0x00); + + reg_write(client, GROUPED_PARAMETER_HOLD, 0x00); /* off */ + + ret = 0; + +done: + imx074_s_power(subdev, 0); + return ret; +} + +static int imx074_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct imx074 *priv; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + if (!ssdd) { + dev_err(&client->dev, "IMX074: missing platform data!\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n"); + return -EIO; + } + + priv = devm_kzalloc(&client->dev, sizeof(struct imx074), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + v4l2_i2c_subdev_init(&priv->subdev, client, &imx074_subdev_ops); + + priv->fmt = &imx074_colour_fmts[0]; + + return imx074_video_probe(client); +} + +static int imx074_remove(struct i2c_client *client) +{ + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + if (ssdd->free_bus) + ssdd->free_bus(ssdd); + + return 0; +} + +static const struct i2c_device_id imx074_id[] = { + { "imx074", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, imx074_id); + +static struct i2c_driver imx074_i2c_driver = { + .driver = { + .name = "imx074", + }, + .probe = imx074_probe, + .remove = imx074_remove, + .id_table = imx074_id, +}; + +module_i2c_driver(imx074_i2c_driver); + +MODULE_DESCRIPTION("Sony IMX074 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/mt9m001.c b/drivers/media/i2c/soc_camera/mt9m001.c new file mode 100644 index 00000000..dd908980 --- /dev/null +++ b/drivers/media/i2c/soc_camera/mt9m001.c @@ -0,0 +1,751 @@ +/* + * Driver for MT9M001 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * mt9m001 i2c address 0x5d + * The platform has to define struct i2c_board_info objects and link to them + * from struct soc_camera_host_desc + */ + +/* mt9m001 selected register addresses */ +#define MT9M001_CHIP_VERSION 0x00 +#define MT9M001_ROW_START 0x01 +#define MT9M001_COLUMN_START 0x02 +#define MT9M001_WINDOW_HEIGHT 0x03 +#define MT9M001_WINDOW_WIDTH 0x04 +#define MT9M001_HORIZONTAL_BLANKING 0x05 +#define MT9M001_VERTICAL_BLANKING 0x06 +#define MT9M001_OUTPUT_CONTROL 0x07 +#define MT9M001_SHUTTER_WIDTH 0x09 +#define MT9M001_FRAME_RESTART 0x0b +#define MT9M001_SHUTTER_DELAY 0x0c +#define MT9M001_RESET 0x0d +#define MT9M001_READ_OPTIONS1 0x1e +#define MT9M001_READ_OPTIONS2 0x20 +#define MT9M001_GLOBAL_GAIN 0x35 +#define MT9M001_CHIP_ENABLE 0xF1 + +#define MT9M001_MAX_WIDTH 1280 +#define MT9M001_MAX_HEIGHT 1024 +#define MT9M001_MIN_WIDTH 48 +#define MT9M001_MIN_HEIGHT 32 +#define MT9M001_COLUMN_SKIP 20 +#define MT9M001_ROW_SKIP 12 + +/* MT9M001 has only one fixed colorspace per pixelcode */ +struct mt9m001_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +/* Find a data format by a pixel code in an array */ +static const struct mt9m001_datafmt *mt9m001_find_datafmt( + enum v4l2_mbus_pixelcode code, const struct mt9m001_datafmt *fmt, + int n) +{ + int i; + for (i = 0; i < n; i++) + if (fmt[i].code == code) + return fmt + i; + + return NULL; +} + +static const struct mt9m001_datafmt mt9m001_colour_fmts[] = { + /* + * Order important: first natively supported, + * second supported with a GPIO extender + */ + {V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, +}; + +static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = { + /* Order important - see above */ + {V4L2_MBUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, +}; + +struct mt9m001 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct { + /* exposure/auto-exposure cluster */ + struct v4l2_ctrl *autoexposure; + struct v4l2_ctrl *exposure; + }; + struct v4l2_rect rect; /* Sensor window */ + const struct mt9m001_datafmt *fmt; + const struct mt9m001_datafmt *fmts; + int num_fmts; + int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */ + unsigned int total_h; + unsigned short y_skip_top; /* Lines to skip at the top */ +}; + +static struct mt9m001 *to_mt9m001(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct mt9m001, subdev); +} + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int reg_set(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret | data); +} + +static int reg_clear(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret & ~data); +} + +static int mt9m001_init(struct i2c_client *client) +{ + int ret; + + dev_dbg(&client->dev, "%s\n", __func__); + + /* + * We don't know, whether platform provides reset, issue a soft reset + * too. This returns all registers to their default values. + */ + ret = reg_write(client, MT9M001_RESET, 1); + if (!ret) + ret = reg_write(client, MT9M001_RESET, 0); + + /* Disable chip, synchronous option update */ + if (!ret) + ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 0); + + return ret; +} + +static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* Switch to master "normal" mode or stop sensor readout */ + if (reg_write(client, MT9M001_OUTPUT_CONTROL, enable ? 2 : 0) < 0) + return -EIO; + return 0; +} + +static int mt9m001_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_rect rect = a->c; + int ret; + const u16 hblank = 9, vblank = 25; + + if (mt9m001->fmts == mt9m001_colour_fmts) + /* + * Bayer format - even number of rows for simplicity, + * but let the user play with the top row. + */ + rect.height = ALIGN(rect.height, 2); + + /* Datasheet requirement: see register description */ + rect.width = ALIGN(rect.width, 2); + rect.left = ALIGN(rect.left, 2); + + soc_camera_limit_side(&rect.left, &rect.width, + MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT); + + mt9m001->total_h = rect.height + mt9m001->y_skip_top + vblank; + + /* Blanking and start values - default... */ + ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank); + if (!ret) + ret = reg_write(client, MT9M001_VERTICAL_BLANKING, vblank); + + /* + * The caller provides a supported format, as verified per + * call to .try_mbus_fmt() + */ + if (!ret) + ret = reg_write(client, MT9M001_COLUMN_START, rect.left); + if (!ret) + ret = reg_write(client, MT9M001_ROW_START, rect.top); + if (!ret) + ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect.width - 1); + if (!ret) + ret = reg_write(client, MT9M001_WINDOW_HEIGHT, + rect.height + mt9m001->y_skip_top - 1); + if (!ret && v4l2_ctrl_g_ctrl(mt9m001->autoexposure) == V4L2_EXPOSURE_AUTO) + ret = reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h); + + if (!ret) + mt9m001->rect = rect; + + return ret; +} + +static int mt9m001_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + a->c = mt9m001->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9m001_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9M001_COLUMN_SKIP; + a->bounds.top = MT9M001_ROW_SKIP; + a->bounds.width = MT9M001_MAX_WIDTH; + a->bounds.height = MT9M001_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9m001_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + mf->width = mt9m001->rect.width; + mf->height = mt9m001->rect.height; + mf->code = mt9m001->fmt->code; + mf->colorspace = mt9m001->fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9m001_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_crop a = { + .c = { + .left = mt9m001->rect.left, + .top = mt9m001->rect.top, + .width = mf->width, + .height = mf->height, + }, + }; + int ret; + + /* No support for scaling so far, just crop. TODO: use skipping */ + ret = mt9m001_s_crop(sd, &a); + if (!ret) { + mf->width = mt9m001->rect.width; + mf->height = mt9m001->rect.height; + mt9m001->fmt = mt9m001_find_datafmt(mf->code, + mt9m001->fmts, mt9m001->num_fmts); + mf->colorspace = mt9m001->fmt->colorspace; + } + + return ret; +} + +static int mt9m001_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + const struct mt9m001_datafmt *fmt; + + v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH, + MT9M001_MAX_WIDTH, 1, + &mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top, + MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0); + + if (mt9m001->fmts == mt9m001_colour_fmts) + mf->height = ALIGN(mf->height - 1, 2); + + fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts, + mt9m001->num_fmts); + if (!fmt) { + fmt = mt9m001->fmt; + mf->code = fmt->code; + } + + mf->colorspace = fmt->colorspace; + + return 0; +} + +static int mt9m001_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = mt9m001->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m001_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + reg->size = 2; + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9m001_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int mt9m001_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m001 *mt9m001 = container_of(ctrl->handler, + struct mt9m001, hdl); + s32 min, max; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE_AUTO: + min = mt9m001->exposure->minimum; + max = mt9m001->exposure->maximum; + mt9m001->exposure->val = + (524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min; + break; + } + return 0; +} + +static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m001 *mt9m001 = container_of(ctrl->handler, + struct mt9m001, hdl); + struct v4l2_subdev *sd = &mt9m001->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct v4l2_ctrl *exp = mt9m001->exposure; + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->val) + data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000); + else + data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000); + if (data < 0) + return -EIO; + return 0; + + case V4L2_CID_GAIN: + /* See Datasheet Table 7, Gain settings. */ + if (ctrl->val <= ctrl->default_value) { + /* Pack it into 0..1 step 0.125, register values 0..8 */ + unsigned long range = ctrl->default_value - ctrl->minimum; + data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range; + + dev_dbg(&client->dev, "Setting gain %d\n", data); + data = reg_write(client, MT9M001_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } else { + /* Pack it into 1.125..15 variable step, register values 9..67 */ + /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ + unsigned long range = ctrl->maximum - ctrl->default_value - 1; + unsigned long gain = ((ctrl->val - ctrl->default_value - 1) * + 111 + range / 2) / range + 9; + + if (gain <= 32) + data = gain; + else if (gain <= 64) + data = ((gain - 32) * 16 + 16) / 32 + 80; + else + data = ((gain - 64) * 7 + 28) / 56 + 96; + + dev_dbg(&client->dev, "Setting gain from %d to %d\n", + reg_read(client, MT9M001_GLOBAL_GAIN), data); + data = reg_write(client, MT9M001_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } + return 0; + + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->val == V4L2_EXPOSURE_MANUAL) { + unsigned long range = exp->maximum - exp->minimum; + unsigned long shutter = ((exp->val - exp->minimum) * 1048 + + range / 2) / range + 1; + + dev_dbg(&client->dev, + "Setting shutter width from %d to %lu\n", + reg_read(client, MT9M001_SHUTTER_WIDTH), shutter); + if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0) + return -EIO; + } else { + const u16 vblank = 25; + + mt9m001->total_h = mt9m001->rect.height + + mt9m001->y_skip_top + vblank; + if (reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h) < 0) + return -EIO; + } + return 0; + } + return -EINVAL; +} + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd, + struct i2c_client *client) +{ + struct mt9m001 *mt9m001 = to_mt9m001(client); + s32 data; + unsigned long flags; + int ret; + + ret = mt9m001_s_power(&mt9m001->subdev, 1); + if (ret < 0) + return ret; + + /* Enable the chip */ + data = reg_write(client, MT9M001_CHIP_ENABLE, 1); + dev_dbg(&client->dev, "write: %d\n", data); + + /* Read out the chip version register */ + data = reg_read(client, MT9M001_CHIP_VERSION); + + /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ + switch (data) { + case 0x8411: + case 0x8421: + mt9m001->model = V4L2_IDENT_MT9M001C12ST; + mt9m001->fmts = mt9m001_colour_fmts; + break; + case 0x8431: + mt9m001->model = V4L2_IDENT_MT9M001C12STM; + mt9m001->fmts = mt9m001_monochrome_fmts; + break; + default: + dev_err(&client->dev, + "No MT9M001 chip detected, register read %x\n", data); + ret = -ENODEV; + goto done; + } + + mt9m001->num_fmts = 0; + + /* + * This is a 10bit sensor, so by default we only allow 10bit. + * The platform may support different bus widths due to + * different routing of the data lines. + */ + if (ssdd->query_bus_param) + flags = ssdd->query_bus_param(ssdd); + else + flags = SOCAM_DATAWIDTH_10; + + if (flags & SOCAM_DATAWIDTH_10) + mt9m001->num_fmts++; + else + mt9m001->fmts++; + + if (flags & SOCAM_DATAWIDTH_8) + mt9m001->num_fmts++; + + mt9m001->fmt = &mt9m001->fmts[0]; + + dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, + data == 0x8431 ? "C12STM" : "C12ST"); + + ret = mt9m001_init(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to initialise the camera\n"); + goto done; + } + + /* mt9m001_init() has reset the chip, returning registers to defaults */ + ret = v4l2_ctrl_handler_setup(&mt9m001->hdl); + +done: + mt9m001_s_power(&mt9m001->subdev, 0); + return ret; +} + +static void mt9m001_video_remove(struct soc_camera_subdev_desc *ssdd) +{ + if (ssdd->free_bus) + ssdd->free_bus(ssdd); +} + +static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + *lines = mt9m001->y_skip_top; + + return 0; +} + +static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = { + .g_volatile_ctrl = mt9m001_g_volatile_ctrl, + .s_ctrl = mt9m001_s_ctrl, +}; + +static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { + .g_chip_ident = mt9m001_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9m001_g_register, + .s_register = mt9m001_s_register, +#endif + .s_power = mt9m001_s_power, +}; + +static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + if (index >= mt9m001->num_fmts) + return -EINVAL; + + *code = mt9m001->fmts[index].code; + return 0; +} + +static int mt9m001_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + /* MT9M001 has all capture_format parameters fixed */ + cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static int mt9m001_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + const struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct mt9m001 *mt9m001 = to_mt9m001(client); + unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample; + + if (ssdd->set_bus_param) + return ssdd->set_bus_param(ssdd, 1 << (bps - 1)); + + /* + * Without board specific bus width settings we only support the + * sensors native bus width + */ + return bps == 10 ? 0 : -EINVAL; +} + +static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { + .s_stream = mt9m001_s_stream, + .s_mbus_fmt = mt9m001_s_fmt, + .g_mbus_fmt = mt9m001_g_fmt, + .try_mbus_fmt = mt9m001_try_fmt, + .s_crop = mt9m001_s_crop, + .g_crop = mt9m001_g_crop, + .cropcap = mt9m001_cropcap, + .enum_mbus_fmt = mt9m001_enum_fmt, + .g_mbus_config = mt9m001_g_mbus_config, + .s_mbus_config = mt9m001_s_mbus_config, +}; + +static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { + .g_skip_top_lines = mt9m001_g_skip_top_lines, +}; + +static struct v4l2_subdev_ops mt9m001_subdev_ops = { + .core = &mt9m001_subdev_core_ops, + .video = &mt9m001_subdev_video_ops, + .sensor = &mt9m001_subdev_sensor_ops, +}; + +static int mt9m001_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9m001 *mt9m001; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + int ret; + + if (!ssdd) { + dev_err(&client->dev, "MT9M001 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9m001 = devm_kzalloc(&client->dev, sizeof(struct mt9m001), GFP_KERNEL); + if (!mt9m001) + return -ENOMEM; + + v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops); + v4l2_ctrl_handler_init(&mt9m001->hdl, 4); + v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_EXPOSURE, 1, 255, 1, 255); + /* + * Simulated autoexposure. If enabled, we calculate shutter width + * ourselves in the driver based on vertical blanking and frame width + */ + mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl, + &mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, + V4L2_EXPOSURE_AUTO); + mt9m001->subdev.ctrl_handler = &mt9m001->hdl; + if (mt9m001->hdl.error) + return mt9m001->hdl.error; + + v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure, + V4L2_EXPOSURE_MANUAL, true); + + /* Second stage probe - when a capture adapter is there */ + mt9m001->y_skip_top = 0; + mt9m001->rect.left = MT9M001_COLUMN_SKIP; + mt9m001->rect.top = MT9M001_ROW_SKIP; + mt9m001->rect.width = MT9M001_MAX_WIDTH; + mt9m001->rect.height = MT9M001_MAX_HEIGHT; + + ret = mt9m001_video_probe(ssdd, client); + if (ret) + v4l2_ctrl_handler_free(&mt9m001->hdl); + + return ret; +} + +static int mt9m001_remove(struct i2c_client *client) +{ + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + v4l2_device_unregister_subdev(&mt9m001->subdev); + v4l2_ctrl_handler_free(&mt9m001->hdl); + mt9m001_video_remove(ssdd); + + return 0; +} + +static const struct i2c_device_id mt9m001_id[] = { + { "mt9m001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9m001_id); + +static struct i2c_driver mt9m001_i2c_driver = { + .driver = { + .name = "mt9m001", + }, + .probe = mt9m001_probe, + .remove = mt9m001_remove, + .id_table = mt9m001_id, +}; + +module_i2c_driver(mt9m001_i2c_driver); + +MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/soc_camera/mt9m111.c b/drivers/media/i2c/soc_camera/mt9m111.c new file mode 100644 index 00000000..8bd4e0d2 --- /dev/null +++ b/drivers/media/i2c/soc_camera/mt9m111.c @@ -0,0 +1,1041 @@ +/* + * Driver for MT9M111/MT9M112/MT9M131 CMOS Image Sensor from Micron/Aptina + * + * Copyright (C) 2008, Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * MT9M111, MT9M112 and MT9M131: + * i2c address is 0x48 or 0x5d (depending on SADDR pin) + * The platform has to define struct i2c_board_info objects and link to them + * from struct soc_camera_host_desc + */ + +/* + * Sensor core register addresses (0x000..0x0ff) + */ +#define MT9M111_CHIP_VERSION 0x000 +#define MT9M111_ROW_START 0x001 +#define MT9M111_COLUMN_START 0x002 +#define MT9M111_WINDOW_HEIGHT 0x003 +#define MT9M111_WINDOW_WIDTH 0x004 +#define MT9M111_HORIZONTAL_BLANKING_B 0x005 +#define MT9M111_VERTICAL_BLANKING_B 0x006 +#define MT9M111_HORIZONTAL_BLANKING_A 0x007 +#define MT9M111_VERTICAL_BLANKING_A 0x008 +#define MT9M111_SHUTTER_WIDTH 0x009 +#define MT9M111_ROW_SPEED 0x00a +#define MT9M111_EXTRA_DELAY 0x00b +#define MT9M111_SHUTTER_DELAY 0x00c +#define MT9M111_RESET 0x00d +#define MT9M111_READ_MODE_B 0x020 +#define MT9M111_READ_MODE_A 0x021 +#define MT9M111_FLASH_CONTROL 0x023 +#define MT9M111_GREEN1_GAIN 0x02b +#define MT9M111_BLUE_GAIN 0x02c +#define MT9M111_RED_GAIN 0x02d +#define MT9M111_GREEN2_GAIN 0x02e +#define MT9M111_GLOBAL_GAIN 0x02f +#define MT9M111_CONTEXT_CONTROL 0x0c8 +#define MT9M111_PAGE_MAP 0x0f0 +#define MT9M111_BYTE_WISE_ADDR 0x0f1 + +#define MT9M111_RESET_SYNC_CHANGES (1 << 15) +#define MT9M111_RESET_RESTART_BAD_FRAME (1 << 9) +#define MT9M111_RESET_SHOW_BAD_FRAMES (1 << 8) +#define MT9M111_RESET_RESET_SOC (1 << 5) +#define MT9M111_RESET_OUTPUT_DISABLE (1 << 4) +#define MT9M111_RESET_CHIP_ENABLE (1 << 3) +#define MT9M111_RESET_ANALOG_STANDBY (1 << 2) +#define MT9M111_RESET_RESTART_FRAME (1 << 1) +#define MT9M111_RESET_RESET_MODE (1 << 0) + +#define MT9M111_RM_FULL_POWER_RD (0 << 10) +#define MT9M111_RM_LOW_POWER_RD (1 << 10) +#define MT9M111_RM_COL_SKIP_4X (1 << 5) +#define MT9M111_RM_ROW_SKIP_4X (1 << 4) +#define MT9M111_RM_COL_SKIP_2X (1 << 3) +#define MT9M111_RM_ROW_SKIP_2X (1 << 2) +#define MT9M111_RMB_MIRROR_COLS (1 << 1) +#define MT9M111_RMB_MIRROR_ROWS (1 << 0) +#define MT9M111_CTXT_CTRL_RESTART (1 << 15) +#define MT9M111_CTXT_CTRL_DEFECTCOR_B (1 << 12) +#define MT9M111_CTXT_CTRL_RESIZE_B (1 << 10) +#define MT9M111_CTXT_CTRL_CTRL2_B (1 << 9) +#define MT9M111_CTXT_CTRL_GAMMA_B (1 << 8) +#define MT9M111_CTXT_CTRL_XENON_EN (1 << 7) +#define MT9M111_CTXT_CTRL_READ_MODE_B (1 << 3) +#define MT9M111_CTXT_CTRL_LED_FLASH_EN (1 << 2) +#define MT9M111_CTXT_CTRL_VBLANK_SEL_B (1 << 1) +#define MT9M111_CTXT_CTRL_HBLANK_SEL_B (1 << 0) + +/* + * Colorpipe register addresses (0x100..0x1ff) + */ +#define MT9M111_OPER_MODE_CTRL 0x106 +#define MT9M111_OUTPUT_FORMAT_CTRL 0x108 +#define MT9M111_REDUCER_XZOOM_B 0x1a0 +#define MT9M111_REDUCER_XSIZE_B 0x1a1 +#define MT9M111_REDUCER_YZOOM_B 0x1a3 +#define MT9M111_REDUCER_YSIZE_B 0x1a4 +#define MT9M111_REDUCER_XZOOM_A 0x1a6 +#define MT9M111_REDUCER_XSIZE_A 0x1a7 +#define MT9M111_REDUCER_YZOOM_A 0x1a9 +#define MT9M111_REDUCER_YSIZE_A 0x1aa + +#define MT9M111_OUTPUT_FORMAT_CTRL2_A 0x13a +#define MT9M111_OUTPUT_FORMAT_CTRL2_B 0x19b + +#define MT9M111_OPMODE_AUTOEXPO_EN (1 << 14) +#define MT9M111_OPMODE_AUTOWHITEBAL_EN (1 << 1) +#define MT9M111_OUTFMT_FLIP_BAYER_COL (1 << 9) +#define MT9M111_OUTFMT_FLIP_BAYER_ROW (1 << 8) +#define MT9M111_OUTFMT_PROCESSED_BAYER (1 << 14) +#define MT9M111_OUTFMT_BYPASS_IFP (1 << 10) +#define MT9M111_OUTFMT_INV_PIX_CLOCK (1 << 9) +#define MT9M111_OUTFMT_RGB (1 << 8) +#define MT9M111_OUTFMT_RGB565 (0 << 6) +#define MT9M111_OUTFMT_RGB555 (1 << 6) +#define MT9M111_OUTFMT_RGB444x (2 << 6) +#define MT9M111_OUTFMT_RGBx444 (3 << 6) +#define MT9M111_OUTFMT_TST_RAMP_OFF (0 << 4) +#define MT9M111_OUTFMT_TST_RAMP_COL (1 << 4) +#define MT9M111_OUTFMT_TST_RAMP_ROW (2 << 4) +#define MT9M111_OUTFMT_TST_RAMP_FRAME (3 << 4) +#define MT9M111_OUTFMT_SHIFT_3_UP (1 << 3) +#define MT9M111_OUTFMT_AVG_CHROMA (1 << 2) +#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN (1 << 1) +#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B (1 << 0) + +/* + * Camera control register addresses (0x200..0x2ff not implemented) + */ + +#define reg_read(reg) mt9m111_reg_read(client, MT9M111_##reg) +#define reg_write(reg, val) mt9m111_reg_write(client, MT9M111_##reg, (val)) +#define reg_set(reg, val) mt9m111_reg_set(client, MT9M111_##reg, (val)) +#define reg_clear(reg, val) mt9m111_reg_clear(client, MT9M111_##reg, (val)) +#define reg_mask(reg, val, mask) mt9m111_reg_mask(client, MT9M111_##reg, \ + (val), (mask)) + +#define MT9M111_MIN_DARK_ROWS 8 +#define MT9M111_MIN_DARK_COLS 26 +#define MT9M111_MAX_HEIGHT 1024 +#define MT9M111_MAX_WIDTH 1280 + +struct mt9m111_context { + u16 read_mode; + u16 blanking_h; + u16 blanking_v; + u16 reducer_xzoom; + u16 reducer_yzoom; + u16 reducer_xsize; + u16 reducer_ysize; + u16 output_fmt_ctrl2; + u16 control; +}; + +static struct mt9m111_context context_a = { + .read_mode = MT9M111_READ_MODE_A, + .blanking_h = MT9M111_HORIZONTAL_BLANKING_A, + .blanking_v = MT9M111_VERTICAL_BLANKING_A, + .reducer_xzoom = MT9M111_REDUCER_XZOOM_A, + .reducer_yzoom = MT9M111_REDUCER_YZOOM_A, + .reducer_xsize = MT9M111_REDUCER_XSIZE_A, + .reducer_ysize = MT9M111_REDUCER_YSIZE_A, + .output_fmt_ctrl2 = MT9M111_OUTPUT_FORMAT_CTRL2_A, + .control = MT9M111_CTXT_CTRL_RESTART, +}; + +static struct mt9m111_context context_b = { + .read_mode = MT9M111_READ_MODE_B, + .blanking_h = MT9M111_HORIZONTAL_BLANKING_B, + .blanking_v = MT9M111_VERTICAL_BLANKING_B, + .reducer_xzoom = MT9M111_REDUCER_XZOOM_B, + .reducer_yzoom = MT9M111_REDUCER_YZOOM_B, + .reducer_xsize = MT9M111_REDUCER_XSIZE_B, + .reducer_ysize = MT9M111_REDUCER_YSIZE_B, + .output_fmt_ctrl2 = MT9M111_OUTPUT_FORMAT_CTRL2_B, + .control = MT9M111_CTXT_CTRL_RESTART | + MT9M111_CTXT_CTRL_DEFECTCOR_B | MT9M111_CTXT_CTRL_RESIZE_B | + MT9M111_CTXT_CTRL_CTRL2_B | MT9M111_CTXT_CTRL_GAMMA_B | + MT9M111_CTXT_CTRL_READ_MODE_B | MT9M111_CTXT_CTRL_VBLANK_SEL_B | + MT9M111_CTXT_CTRL_HBLANK_SEL_B, +}; + +/* MT9M111 has only one fixed colorspace per pixelcode */ +struct mt9m111_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +static const struct mt9m111_datafmt mt9m111_colour_fmts[] = { + {V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_BGR565_2X8_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_BGR565_2X8_BE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB}, +}; + +struct mt9m111 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct v4l2_ctrl *gain; + int model; /* V4L2_IDENT_MT9M111 or V4L2_IDENT_MT9M112 code + * from v4l2-chip-ident.h */ + struct mt9m111_context *ctx; + struct v4l2_rect rect; /* cropping rectangle */ + int width; /* output */ + int height; /* sizes */ + struct mutex power_lock; /* lock to protect power_count */ + int power_count; + const struct mt9m111_datafmt *fmt; + int lastpage; /* PageMap cache value */ +}; + +/* Find a data format by a pixel code */ +static const struct mt9m111_datafmt *mt9m111_find_datafmt(struct mt9m111 *mt9m111, + enum v4l2_mbus_pixelcode code) +{ + int i; + for (i = 0; i < ARRAY_SIZE(mt9m111_colour_fmts); i++) + if (mt9m111_colour_fmts[i].code == code) + return mt9m111_colour_fmts + i; + + return mt9m111->fmt; +} + +static struct mt9m111 *to_mt9m111(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct mt9m111, subdev); +} + +static int reg_page_map_set(struct i2c_client *client, const u16 reg) +{ + int ret; + u16 page; + struct mt9m111 *mt9m111 = to_mt9m111(client); + + page = (reg >> 8); + if (page == mt9m111->lastpage) + return 0; + if (page > 2) + return -EINVAL; + + ret = i2c_smbus_write_word_swapped(client, MT9M111_PAGE_MAP, page); + if (!ret) + mt9m111->lastpage = page; + return ret; +} + +static int mt9m111_reg_read(struct i2c_client *client, const u16 reg) +{ + int ret; + + ret = reg_page_map_set(client, reg); + if (!ret) + ret = i2c_smbus_read_word_swapped(client, reg & 0xff); + + dev_dbg(&client->dev, "read reg.%03x -> %04x\n", reg, ret); + return ret; +} + +static int mt9m111_reg_write(struct i2c_client *client, const u16 reg, + const u16 data) +{ + int ret; + + ret = reg_page_map_set(client, reg); + if (!ret) + ret = i2c_smbus_write_word_swapped(client, reg & 0xff, data); + dev_dbg(&client->dev, "write reg.%03x = %04x -> %d\n", reg, data, ret); + return ret; +} + +static int mt9m111_reg_set(struct i2c_client *client, const u16 reg, + const u16 data) +{ + int ret; + + ret = mt9m111_reg_read(client, reg); + if (ret >= 0) + ret = mt9m111_reg_write(client, reg, ret | data); + return ret; +} + +static int mt9m111_reg_clear(struct i2c_client *client, const u16 reg, + const u16 data) +{ + int ret; + + ret = mt9m111_reg_read(client, reg); + if (ret >= 0) + ret = mt9m111_reg_write(client, reg, ret & ~data); + return ret; +} + +static int mt9m111_reg_mask(struct i2c_client *client, const u16 reg, + const u16 data, const u16 mask) +{ + int ret; + + ret = mt9m111_reg_read(client, reg); + if (ret >= 0) + ret = mt9m111_reg_write(client, reg, (ret & ~mask) | data); + return ret; +} + +static int mt9m111_set_context(struct mt9m111 *mt9m111, + struct mt9m111_context *ctx) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + return reg_write(CONTEXT_CONTROL, ctx->control); +} + +static int mt9m111_setup_rect_ctx(struct mt9m111 *mt9m111, + struct mt9m111_context *ctx, struct v4l2_rect *rect, + unsigned int width, unsigned int height) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + int ret = mt9m111_reg_write(client, ctx->reducer_xzoom, rect->width); + if (!ret) + ret = mt9m111_reg_write(client, ctx->reducer_yzoom, rect->height); + if (!ret) + ret = mt9m111_reg_write(client, ctx->reducer_xsize, width); + if (!ret) + ret = mt9m111_reg_write(client, ctx->reducer_ysize, height); + return ret; +} + +static int mt9m111_setup_geometry(struct mt9m111 *mt9m111, struct v4l2_rect *rect, + int width, int height, enum v4l2_mbus_pixelcode code) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + int ret; + + ret = reg_write(COLUMN_START, rect->left); + if (!ret) + ret = reg_write(ROW_START, rect->top); + + if (!ret) + ret = reg_write(WINDOW_WIDTH, rect->width); + if (!ret) + ret = reg_write(WINDOW_HEIGHT, rect->height); + + if (code != V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE) { + /* IFP in use, down-scaling possible */ + if (!ret) + ret = mt9m111_setup_rect_ctx(mt9m111, &context_b, + rect, width, height); + if (!ret) + ret = mt9m111_setup_rect_ctx(mt9m111, &context_a, + rect, width, height); + } + + dev_dbg(&client->dev, "%s(%x): %ux%u@%u:%u -> %ux%u = %d\n", + __func__, code, rect->width, rect->height, rect->left, rect->top, + width, height, ret); + + return ret; +} + +static int mt9m111_enable(struct mt9m111 *mt9m111) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + return reg_write(RESET, MT9M111_RESET_CHIP_ENABLE); +} + +static int mt9m111_reset(struct mt9m111 *mt9m111) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + int ret; + + ret = reg_set(RESET, MT9M111_RESET_RESET_MODE); + if (!ret) + ret = reg_set(RESET, MT9M111_RESET_RESET_SOC); + if (!ret) + ret = reg_clear(RESET, MT9M111_RESET_RESET_MODE + | MT9M111_RESET_RESET_SOC); + + return ret; +} + +static int mt9m111_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct v4l2_rect rect = a->c; + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + int width, height; + int ret; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (mt9m111->fmt->code == V4L2_MBUS_FMT_SBGGR8_1X8 || + mt9m111->fmt->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE) { + /* Bayer format - even size lengths */ + rect.width = ALIGN(rect.width, 2); + rect.height = ALIGN(rect.height, 2); + /* Let the user play with the starting pixel */ + } + + /* FIXME: the datasheet doesn't specify minimum sizes */ + soc_camera_limit_side(&rect.left, &rect.width, + MT9M111_MIN_DARK_COLS, 2, MT9M111_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9M111_MIN_DARK_ROWS, 2, MT9M111_MAX_HEIGHT); + + width = min(mt9m111->width, rect.width); + height = min(mt9m111->height, rect.height); + + ret = mt9m111_setup_geometry(mt9m111, &rect, width, height, mt9m111->fmt->code); + if (!ret) { + mt9m111->rect = rect; + mt9m111->width = width; + mt9m111->height = height; + } + + return ret; +} + +static int mt9m111_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + + a->c = mt9m111->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + a->bounds.left = MT9M111_MIN_DARK_COLS; + a->bounds.top = MT9M111_MIN_DARK_ROWS; + a->bounds.width = MT9M111_MAX_WIDTH; + a->bounds.height = MT9M111_MAX_HEIGHT; + a->defrect = a->bounds; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9m111_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + + mf->width = mt9m111->width; + mf->height = mt9m111->height; + mf->code = mt9m111->fmt->code; + mf->colorspace = mt9m111->fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111, + enum v4l2_mbus_pixelcode code) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + u16 data_outfmt2, mask_outfmt2 = MT9M111_OUTFMT_PROCESSED_BAYER | + MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_RGB | + MT9M111_OUTFMT_RGB565 | MT9M111_OUTFMT_RGB555 | + MT9M111_OUTFMT_RGB444x | MT9M111_OUTFMT_RGBx444 | + MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN | + MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; + int ret; + + switch (code) { + case V4L2_MBUS_FMT_SBGGR8_1X8: + data_outfmt2 = MT9M111_OUTFMT_PROCESSED_BAYER | + MT9M111_OUTFMT_RGB; + break; + case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE: + data_outfmt2 = MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_RGB; + break; + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555 | + MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN; + break; + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555; + break; + case V4L2_MBUS_FMT_RGB565_2X8_LE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 | + MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN; + break; + case V4L2_MBUS_FMT_RGB565_2X8_BE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565; + break; + case V4L2_MBUS_FMT_BGR565_2X8_BE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 | + MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; + break; + case V4L2_MBUS_FMT_BGR565_2X8_LE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 | + MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN | + MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; + break; + case V4L2_MBUS_FMT_UYVY8_2X8: + data_outfmt2 = 0; + break; + case V4L2_MBUS_FMT_VYUY8_2X8: + data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; + break; + case V4L2_MBUS_FMT_YUYV8_2X8: + data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN; + break; + case V4L2_MBUS_FMT_YVYU8_2X8: + data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN | + MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; + break; + default: + dev_err(&client->dev, "Pixel format not handled: %x\n", code); + return -EINVAL; + } + + ret = mt9m111_reg_mask(client, context_a.output_fmt_ctrl2, + data_outfmt2, mask_outfmt2); + if (!ret) + ret = mt9m111_reg_mask(client, context_b.output_fmt_ctrl2, + data_outfmt2, mask_outfmt2); + + return ret; +} + +static int mt9m111_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + const struct mt9m111_datafmt *fmt; + struct v4l2_rect *rect = &mt9m111->rect; + bool bayer; + + fmt = mt9m111_find_datafmt(mt9m111, mf->code); + + bayer = fmt->code == V4L2_MBUS_FMT_SBGGR8_1X8 || + fmt->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE; + + /* + * With Bayer format enforce even side lengths, but let the user play + * with the starting pixel + */ + if (bayer) { + rect->width = ALIGN(rect->width, 2); + rect->height = ALIGN(rect->height, 2); + } + + if (fmt->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE) { + /* IFP bypass mode, no scaling */ + mf->width = rect->width; + mf->height = rect->height; + } else { + /* No upscaling */ + if (mf->width > rect->width) + mf->width = rect->width; + if (mf->height > rect->height) + mf->height = rect->height; + } + + dev_dbg(&client->dev, "%s(): %ux%u, code=%x\n", __func__, + mf->width, mf->height, fmt->code); + + mf->code = fmt->code; + mf->colorspace = fmt->colorspace; + + return 0; +} + +static int mt9m111_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + const struct mt9m111_datafmt *fmt; + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + struct v4l2_rect *rect = &mt9m111->rect; + int ret; + + mt9m111_try_fmt(sd, mf); + fmt = mt9m111_find_datafmt(mt9m111, mf->code); + /* try_fmt() guarantees fmt != NULL && fmt->code == mf->code */ + + ret = mt9m111_setup_geometry(mt9m111, rect, mf->width, mf->height, mf->code); + if (!ret) + ret = mt9m111_set_pixfmt(mt9m111, mf->code); + if (!ret) { + mt9m111->width = mf->width; + mt9m111->height = mf->height; + mt9m111->fmt = fmt; + } + + return ret; +} + +static int mt9m111_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = mt9m111->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m111_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int val; + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff) + return -EINVAL; + if (reg->match.addr != client->addr) + return -ENODEV; + + val = mt9m111_reg_read(client, reg->reg); + reg->size = 2; + reg->val = (u64)val; + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9m111_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (mt9m111_reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int mt9m111_set_flip(struct mt9m111 *mt9m111, int flip, int mask) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + int ret; + + if (flip) + ret = mt9m111_reg_set(client, mt9m111->ctx->read_mode, mask); + else + ret = mt9m111_reg_clear(client, mt9m111->ctx->read_mode, mask); + + return ret; +} + +static int mt9m111_get_global_gain(struct mt9m111 *mt9m111) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + int data; + + data = reg_read(GLOBAL_GAIN); + if (data >= 0) + return (data & 0x2f) * (1 << ((data >> 10) & 1)) * + (1 << ((data >> 9) & 1)); + return data; +} + +static int mt9m111_set_global_gain(struct mt9m111 *mt9m111, int gain) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + u16 val; + + if (gain > 63 * 2 * 2) + return -EINVAL; + + if ((gain >= 64 * 2) && (gain < 63 * 2 * 2)) + val = (1 << 10) | (1 << 9) | (gain / 4); + else if ((gain >= 64) && (gain < 64 * 2)) + val = (1 << 9) | (gain / 2); + else + val = gain; + + return reg_write(GLOBAL_GAIN, val); +} + +static int mt9m111_set_autoexposure(struct mt9m111 *mt9m111, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + + if (val == V4L2_EXPOSURE_AUTO) + return reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN); + return reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN); +} + +static int mt9m111_set_autowhitebalance(struct mt9m111 *mt9m111, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + + if (on) + return reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN); + return reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN); +} + +static int mt9m111_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m111 *mt9m111 = container_of(ctrl->handler, + struct mt9m111, hdl); + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + return mt9m111_set_flip(mt9m111, ctrl->val, + MT9M111_RMB_MIRROR_ROWS); + case V4L2_CID_HFLIP: + return mt9m111_set_flip(mt9m111, ctrl->val, + MT9M111_RMB_MIRROR_COLS); + case V4L2_CID_GAIN: + return mt9m111_set_global_gain(mt9m111, ctrl->val); + case V4L2_CID_EXPOSURE_AUTO: + return mt9m111_set_autoexposure(mt9m111, ctrl->val); + case V4L2_CID_AUTO_WHITE_BALANCE: + return mt9m111_set_autowhitebalance(mt9m111, ctrl->val); + } + + return -EINVAL; +} + +static int mt9m111_suspend(struct mt9m111 *mt9m111) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + int ret; + + v4l2_ctrl_s_ctrl(mt9m111->gain, mt9m111_get_global_gain(mt9m111)); + + ret = reg_set(RESET, MT9M111_RESET_RESET_MODE); + if (!ret) + ret = reg_set(RESET, MT9M111_RESET_RESET_SOC | + MT9M111_RESET_OUTPUT_DISABLE | + MT9M111_RESET_ANALOG_STANDBY); + if (!ret) + ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE); + + return ret; +} + +static void mt9m111_restore_state(struct mt9m111 *mt9m111) +{ + mt9m111_set_context(mt9m111, mt9m111->ctx); + mt9m111_set_pixfmt(mt9m111, mt9m111->fmt->code); + mt9m111_setup_geometry(mt9m111, &mt9m111->rect, + mt9m111->width, mt9m111->height, mt9m111->fmt->code); + v4l2_ctrl_handler_setup(&mt9m111->hdl); +} + +static int mt9m111_resume(struct mt9m111 *mt9m111) +{ + int ret = mt9m111_enable(mt9m111); + if (!ret) + ret = mt9m111_reset(mt9m111); + if (!ret) + mt9m111_restore_state(mt9m111); + + return ret; +} + +static int mt9m111_init(struct mt9m111 *mt9m111) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + int ret; + + ret = mt9m111_enable(mt9m111); + if (!ret) + ret = mt9m111_reset(mt9m111); + if (!ret) + ret = mt9m111_set_context(mt9m111, mt9m111->ctx); + if (ret) + dev_err(&client->dev, "mt9m111 init failed: %d\n", ret); + return ret; +} + +static int mt9m111_power_on(struct mt9m111 *mt9m111) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + int ret; + + ret = soc_camera_power_on(&client->dev, ssdd); + if (ret < 0) + return ret; + + ret = mt9m111_resume(mt9m111); + if (ret < 0) { + dev_err(&client->dev, "Failed to resume the sensor: %d\n", ret); + soc_camera_power_off(&client->dev, ssdd); + } + + return ret; +} + +static void mt9m111_power_off(struct mt9m111 *mt9m111) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + mt9m111_suspend(mt9m111); + soc_camera_power_off(&client->dev, ssdd); +} + +static int mt9m111_s_power(struct v4l2_subdev *sd, int on) +{ + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + int ret = 0; + + mutex_lock(&mt9m111->power_lock); + + /* + * If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (mt9m111->power_count == !on) { + if (on) + ret = mt9m111_power_on(mt9m111); + else + mt9m111_power_off(mt9m111); + } + + if (!ret) { + /* Update the power count. */ + mt9m111->power_count += on ? 1 : -1; + WARN_ON(mt9m111->power_count < 0); + } + + mutex_unlock(&mt9m111->power_lock); + return ret; +} + +static const struct v4l2_ctrl_ops mt9m111_ctrl_ops = { + .s_ctrl = mt9m111_s_ctrl, +}; + +static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = { + .g_chip_ident = mt9m111_g_chip_ident, + .s_power = mt9m111_s_power, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9m111_g_register, + .s_register = mt9m111_s_register, +#endif +}; + +static int mt9m111_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(mt9m111_colour_fmts)) + return -EINVAL; + + *code = mt9m111_colour_fmts[index].code; + return 0; +} + +static int mt9m111_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = { + .s_mbus_fmt = mt9m111_s_fmt, + .g_mbus_fmt = mt9m111_g_fmt, + .try_mbus_fmt = mt9m111_try_fmt, + .s_crop = mt9m111_s_crop, + .g_crop = mt9m111_g_crop, + .cropcap = mt9m111_cropcap, + .enum_mbus_fmt = mt9m111_enum_fmt, + .g_mbus_config = mt9m111_g_mbus_config, +}; + +static struct v4l2_subdev_ops mt9m111_subdev_ops = { + .core = &mt9m111_subdev_core_ops, + .video = &mt9m111_subdev_video_ops, +}; + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9m111_video_probe(struct i2c_client *client) +{ + struct mt9m111 *mt9m111 = to_mt9m111(client); + s32 data; + int ret; + + ret = mt9m111_s_power(&mt9m111->subdev, 1); + if (ret < 0) + return ret; + + data = reg_read(CHIP_VERSION); + + switch (data) { + case 0x143a: /* MT9M111 or MT9M131 */ + mt9m111->model = V4L2_IDENT_MT9M111; + dev_info(&client->dev, + "Detected a MT9M111/MT9M131 chip ID %x\n", data); + break; + case 0x148c: /* MT9M112 */ + mt9m111->model = V4L2_IDENT_MT9M112; + dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data); + break; + default: + dev_err(&client->dev, + "No MT9M111/MT9M112/MT9M131 chip detected register read %x\n", + data); + ret = -ENODEV; + goto done; + } + + ret = mt9m111_init(mt9m111); + if (ret) + goto done; + + ret = v4l2_ctrl_handler_setup(&mt9m111->hdl); + +done: + mt9m111_s_power(&mt9m111->subdev, 0); + return ret; +} + +static int mt9m111_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9m111 *mt9m111; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + int ret; + + if (!ssdd) { + dev_err(&client->dev, "mt9m111: driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9m111 = devm_kzalloc(&client->dev, sizeof(struct mt9m111), GFP_KERNEL); + if (!mt9m111) + return -ENOMEM; + + /* Default HIGHPOWER context */ + mt9m111->ctx = &context_b; + + v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops); + v4l2_ctrl_handler_init(&mt9m111->hdl, 5); + v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, + V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); + mt9m111->gain = v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, + V4L2_CID_GAIN, 0, 63 * 2 * 2, 1, 32); + v4l2_ctrl_new_std_menu(&mt9m111->hdl, + &mt9m111_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, + V4L2_EXPOSURE_AUTO); + mt9m111->subdev.ctrl_handler = &mt9m111->hdl; + if (mt9m111->hdl.error) + return mt9m111->hdl.error; + + /* Second stage probe - when a capture adapter is there */ + mt9m111->rect.left = MT9M111_MIN_DARK_COLS; + mt9m111->rect.top = MT9M111_MIN_DARK_ROWS; + mt9m111->rect.width = MT9M111_MAX_WIDTH; + mt9m111->rect.height = MT9M111_MAX_HEIGHT; + mt9m111->fmt = &mt9m111_colour_fmts[0]; + mt9m111->lastpage = -1; + mutex_init(&mt9m111->power_lock); + + ret = mt9m111_video_probe(client); + if (ret) + v4l2_ctrl_handler_free(&mt9m111->hdl); + + return ret; +} + +static int mt9m111_remove(struct i2c_client *client) +{ + struct mt9m111 *mt9m111 = to_mt9m111(client); + + v4l2_device_unregister_subdev(&mt9m111->subdev); + v4l2_ctrl_handler_free(&mt9m111->hdl); + + return 0; +} + +static const struct i2c_device_id mt9m111_id[] = { + { "mt9m111", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9m111_id); + +static struct i2c_driver mt9m111_i2c_driver = { + .driver = { + .name = "mt9m111", + }, + .probe = mt9m111_probe, + .remove = mt9m111_remove, + .id_table = mt9m111_id, +}; + +module_i2c_driver(mt9m111_i2c_driver); + +MODULE_DESCRIPTION("Micron/Aptina MT9M111/MT9M112/MT9M131 Camera driver"); +MODULE_AUTHOR("Robert Jarzmik"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/soc_camera/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c new file mode 100644 index 00000000..26a15b87 --- /dev/null +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -0,0 +1,851 @@ +/* + * Driver for MT9T031 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * ATTENTION: this driver still cannot be used outside of the soc-camera + * framework because of its PM implementation, using the video_device node. + * If hardware becomes available for testing, alternative PM approaches shall + * be considered and tested. + */ + +/* + * mt9t031 i2c address 0x5d + * The platform has to define struct i2c_board_info objects and link to them + * from struct soc_camera_host_desc + */ + +/* mt9t031 selected register addresses */ +#define MT9T031_CHIP_VERSION 0x00 +#define MT9T031_ROW_START 0x01 +#define MT9T031_COLUMN_START 0x02 +#define MT9T031_WINDOW_HEIGHT 0x03 +#define MT9T031_WINDOW_WIDTH 0x04 +#define MT9T031_HORIZONTAL_BLANKING 0x05 +#define MT9T031_VERTICAL_BLANKING 0x06 +#define MT9T031_OUTPUT_CONTROL 0x07 +#define MT9T031_SHUTTER_WIDTH_UPPER 0x08 +#define MT9T031_SHUTTER_WIDTH 0x09 +#define MT9T031_PIXEL_CLOCK_CONTROL 0x0a +#define MT9T031_FRAME_RESTART 0x0b +#define MT9T031_SHUTTER_DELAY 0x0c +#define MT9T031_RESET 0x0d +#define MT9T031_READ_MODE_1 0x1e +#define MT9T031_READ_MODE_2 0x20 +#define MT9T031_READ_MODE_3 0x21 +#define MT9T031_ROW_ADDRESS_MODE 0x22 +#define MT9T031_COLUMN_ADDRESS_MODE 0x23 +#define MT9T031_GLOBAL_GAIN 0x35 +#define MT9T031_CHIP_ENABLE 0xF8 + +#define MT9T031_MAX_HEIGHT 1536 +#define MT9T031_MAX_WIDTH 2048 +#define MT9T031_MIN_HEIGHT 2 +#define MT9T031_MIN_WIDTH 18 +#define MT9T031_HORIZONTAL_BLANK 142 +#define MT9T031_VERTICAL_BLANK 25 +#define MT9T031_COLUMN_SKIP 32 +#define MT9T031_ROW_SKIP 20 + +struct mt9t031 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct { + /* exposure/auto-exposure cluster */ + struct v4l2_ctrl *autoexposure; + struct v4l2_ctrl *exposure; + }; + struct v4l2_rect rect; /* Sensor window */ + int model; /* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */ + u16 xskip; + u16 yskip; + unsigned int total_h; + unsigned short y_skip_top; /* Lines to skip at the top */ +}; + +static struct mt9t031 *to_mt9t031(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct mt9t031, subdev); +} + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int reg_set(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret | data); +} + +static int reg_clear(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret & ~data); +} + +static int set_shutter(struct i2c_client *client, const u32 data) +{ + int ret; + + ret = reg_write(client, MT9T031_SHUTTER_WIDTH_UPPER, data >> 16); + + if (ret >= 0) + ret = reg_write(client, MT9T031_SHUTTER_WIDTH, data & 0xffff); + + return ret; +} + +static int get_shutter(struct i2c_client *client, u32 *data) +{ + int ret; + + ret = reg_read(client, MT9T031_SHUTTER_WIDTH_UPPER); + *data = ret << 16; + + if (ret >= 0) + ret = reg_read(client, MT9T031_SHUTTER_WIDTH); + *data |= ret & 0xffff; + + return ret < 0 ? ret : 0; +} + +static int mt9t031_idle(struct i2c_client *client) +{ + int ret; + + /* Disable chip output, synchronous option update */ + ret = reg_write(client, MT9T031_RESET, 1); + if (ret >= 0) + ret = reg_write(client, MT9T031_RESET, 0); + if (ret >= 0) + ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2); + + return ret >= 0 ? 0 : -EIO; +} + +static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + if (enable) + /* Switch to master "normal" mode */ + ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 2); + else + /* Stop sensor readout */ + ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2); + + if (ret < 0) + return -EIO; + + return 0; +} + +/* target must be _even_ */ +static u16 mt9t031_skip(s32 *source, s32 target, s32 max) +{ + unsigned int skip; + + if (*source < target + target / 2) { + *source = target; + return 1; + } + + skip = min(max, *source + target / 2) / target; + if (skip > 8) + skip = 8; + *source = target * skip; + + return skip; +} + +/* rect is the sensor rectangle, the caller guarantees parameter validity */ +static int mt9t031_set_params(struct i2c_client *client, + struct v4l2_rect *rect, u16 xskip, u16 yskip) +{ + struct mt9t031 *mt9t031 = to_mt9t031(client); + int ret; + u16 xbin, ybin; + const u16 hblank = MT9T031_HORIZONTAL_BLANK, + vblank = MT9T031_VERTICAL_BLANK; + + xbin = min(xskip, (u16)3); + ybin = min(yskip, (u16)3); + + /* + * Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper. + * There is always a valid suitably aligned value. The worst case is + * xbin = 3, width = 2048. Then we will start at 36, the last read out + * pixel will be 2083, which is < 2085 - first black pixel. + * + * MT9T031 datasheet imposes window left border alignment, depending on + * the selected xskip. Failing to conform to this requirement produces + * dark horizontal stripes in the image. However, even obeying to this + * requirement doesn't eliminate the stripes in all configurations. They + * appear "locally reproducibly," but can differ between tests under + * different lighting conditions. + */ + switch (xbin) { + case 1: + rect->left &= ~1; + break; + case 2: + rect->left &= ~3; + break; + case 3: + rect->left = rect->left > roundup(MT9T031_COLUMN_SKIP, 6) ? + (rect->left / 6) * 6 : roundup(MT9T031_COLUMN_SKIP, 6); + } + + rect->top &= ~1; + + dev_dbg(&client->dev, "skip %u:%u, rect %ux%u@%u:%u\n", + xskip, yskip, rect->width, rect->height, rect->left, rect->top); + + /* Disable register update, reconfigure atomically */ + ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 1); + if (ret < 0) + return ret; + + /* Blanking and start values - default... */ + ret = reg_write(client, MT9T031_HORIZONTAL_BLANKING, hblank); + if (ret >= 0) + ret = reg_write(client, MT9T031_VERTICAL_BLANKING, vblank); + + if (yskip != mt9t031->yskip || xskip != mt9t031->xskip) { + /* Binning, skipping */ + if (ret >= 0) + ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE, + ((xbin - 1) << 4) | (xskip - 1)); + if (ret >= 0) + ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE, + ((ybin - 1) << 4) | (yskip - 1)); + } + dev_dbg(&client->dev, "new physical left %u, top %u\n", + rect->left, rect->top); + + /* + * The caller provides a supported format, as guaranteed by + * .try_mbus_fmt(), soc_camera_s_crop() and soc_camera_cropcap() + */ + if (ret >= 0) + ret = reg_write(client, MT9T031_COLUMN_START, rect->left); + if (ret >= 0) + ret = reg_write(client, MT9T031_ROW_START, rect->top); + if (ret >= 0) + ret = reg_write(client, MT9T031_WINDOW_WIDTH, rect->width - 1); + if (ret >= 0) + ret = reg_write(client, MT9T031_WINDOW_HEIGHT, + rect->height + mt9t031->y_skip_top - 1); + if (ret >= 0 && v4l2_ctrl_g_ctrl(mt9t031->autoexposure) == V4L2_EXPOSURE_AUTO) { + mt9t031->total_h = rect->height + mt9t031->y_skip_top + vblank; + + ret = set_shutter(client, mt9t031->total_h); + } + + /* Re-enable register update, commit all changes */ + if (ret >= 0) + ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 1); + + if (ret >= 0) { + mt9t031->rect = *rect; + mt9t031->xskip = xskip; + mt9t031->yskip = yskip; + } + + return ret < 0 ? ret : 0; +} + +static int mt9t031_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct v4l2_rect rect = a->c; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + rect.width = ALIGN(rect.width, 2); + rect.height = ALIGN(rect.height, 2); + + soc_camera_limit_side(&rect.left, &rect.width, + MT9T031_COLUMN_SKIP, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9T031_ROW_SKIP, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT); + + return mt9t031_set_params(client, &rect, mt9t031->xskip, mt9t031->yskip); +} + +static int mt9t031_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + a->c = mt9t031->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9t031_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9T031_COLUMN_SKIP; + a->bounds.top = MT9T031_ROW_SKIP; + a->bounds.width = MT9T031_MAX_WIDTH; + a->bounds.height = MT9T031_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9t031_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + mf->width = mt9t031->rect.width / mt9t031->xskip; + mf->height = mt9t031->rect.height / mt9t031->yskip; + mf->code = V4L2_MBUS_FMT_SBGGR10_1X10; + mf->colorspace = V4L2_COLORSPACE_SRGB; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9t031_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + u16 xskip, yskip; + struct v4l2_rect rect = mt9t031->rect; + + /* + * try_fmt has put width and height within limits. + * S_FMT: use binning and skipping for scaling + */ + xskip = mt9t031_skip(&rect.width, mf->width, MT9T031_MAX_WIDTH); + yskip = mt9t031_skip(&rect.height, mf->height, MT9T031_MAX_HEIGHT); + + mf->code = V4L2_MBUS_FMT_SBGGR10_1X10; + mf->colorspace = V4L2_COLORSPACE_SRGB; + + /* mt9t031_set_params() doesn't change width and height */ + return mt9t031_set_params(client, &rect, xskip, yskip); +} + +/* + * If a user window larger than sensor window is requested, we'll increase the + * sensor window. + */ +static int mt9t031_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + v4l_bound_align_image( + &mf->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1, + &mf->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0); + + mf->code = V4L2_MBUS_FMT_SBGGR10_1X10; + mf->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static int mt9t031_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = mt9t031->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9t031_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9t031_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int mt9t031_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9t031 *mt9t031 = container_of(ctrl->handler, + struct mt9t031, hdl); + const u32 shutter_max = MT9T031_MAX_HEIGHT + MT9T031_VERTICAL_BLANK; + s32 min, max; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE_AUTO: + min = mt9t031->exposure->minimum; + max = mt9t031->exposure->maximum; + mt9t031->exposure->val = + (shutter_max / 2 + (mt9t031->total_h - 1) * (max - min)) + / shutter_max + min; + break; + } + return 0; +} + +static int mt9t031_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9t031 *mt9t031 = container_of(ctrl->handler, + struct mt9t031, hdl); + struct v4l2_subdev *sd = &mt9t031->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct v4l2_ctrl *exp = mt9t031->exposure; + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->val) + data = reg_set(client, MT9T031_READ_MODE_2, 0x8000); + else + data = reg_clear(client, MT9T031_READ_MODE_2, 0x8000); + if (data < 0) + return -EIO; + return 0; + case V4L2_CID_HFLIP: + if (ctrl->val) + data = reg_set(client, MT9T031_READ_MODE_2, 0x4000); + else + data = reg_clear(client, MT9T031_READ_MODE_2, 0x4000); + if (data < 0) + return -EIO; + return 0; + case V4L2_CID_GAIN: + /* See Datasheet Table 7, Gain settings. */ + if (ctrl->val <= ctrl->default_value) { + /* Pack it into 0..1 step 0.125, register values 0..8 */ + unsigned long range = ctrl->default_value - ctrl->minimum; + data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range; + + dev_dbg(&client->dev, "Setting gain %d\n", data); + data = reg_write(client, MT9T031_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } else { + /* Pack it into 1.125..128 variable step, register values 9..0x7860 */ + /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ + unsigned long range = ctrl->maximum - ctrl->default_value - 1; + /* calculated gain: map 65..127 to 9..1024 step 0.125 */ + unsigned long gain = ((ctrl->val - ctrl->default_value - 1) * + 1015 + range / 2) / range + 9; + + if (gain <= 32) /* calculated gain 9..32 -> 9..32 */ + data = gain; + else if (gain <= 64) /* calculated gain 33..64 -> 0x51..0x60 */ + data = ((gain - 32) * 16 + 16) / 32 + 80; + else + /* calculated gain 65..1024 -> (1..120) << 8 + 0x60 */ + data = (((gain - 64 + 7) * 32) & 0xff00) | 0x60; + + dev_dbg(&client->dev, "Set gain from 0x%x to 0x%x\n", + reg_read(client, MT9T031_GLOBAL_GAIN), data); + data = reg_write(client, MT9T031_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } + return 0; + + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->val == V4L2_EXPOSURE_MANUAL) { + unsigned int range = exp->maximum - exp->minimum; + unsigned int shutter = ((exp->val - exp->minimum) * 1048 + + range / 2) / range + 1; + u32 old; + + get_shutter(client, &old); + dev_dbg(&client->dev, "Set shutter from %u to %u\n", + old, shutter); + if (set_shutter(client, shutter) < 0) + return -EIO; + } else { + const u16 vblank = MT9T031_VERTICAL_BLANK; + mt9t031->total_h = mt9t031->rect.height + + mt9t031->y_skip_top + vblank; + + if (set_shutter(client, mt9t031->total_h) < 0) + return -EIO; + } + return 0; + default: + return -EINVAL; + } + return 0; +} + +/* + * Power Management: + * This function does nothing for now but must be present for pm to work + */ +static int mt9t031_runtime_suspend(struct device *dev) +{ + return 0; +} + +/* + * Power Management: + * COLUMN_ADDRESS_MODE and ROW_ADDRESS_MODE are not rewritten if unchanged + * they are however changed at reset if the platform hook is present + * thus we rewrite them with the values stored by the driver + */ +static int mt9t031_runtime_resume(struct device *dev) +{ + struct video_device *vdev = to_video_device(dev); + struct v4l2_subdev *sd = soc_camera_vdev_to_subdev(vdev); + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + int ret; + u16 xbin, ybin; + + xbin = min(mt9t031->xskip, (u16)3); + ybin = min(mt9t031->yskip, (u16)3); + + ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE, + ((xbin - 1) << 4) | (mt9t031->xskip - 1)); + if (ret < 0) + return ret; + + ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE, + ((ybin - 1) << 4) | (mt9t031->yskip - 1)); + if (ret < 0) + return ret; + + return 0; +} + +static struct dev_pm_ops mt9t031_dev_pm_ops = { + .runtime_suspend = mt9t031_runtime_suspend, + .runtime_resume = mt9t031_runtime_resume, +}; + +static struct device_type mt9t031_dev_type = { + .name = "MT9T031", + .pm = &mt9t031_dev_pm_ops, +}; + +static int mt9t031_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct video_device *vdev = soc_camera_i2c_to_vdev(client); + int ret; + + if (on) { + ret = soc_camera_power_on(&client->dev, ssdd); + if (ret < 0) + return ret; + vdev->dev.type = &mt9t031_dev_type; + } else { + vdev->dev.type = NULL; + soc_camera_power_off(&client->dev, ssdd); + } + + return 0; +} + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9t031_video_probe(struct i2c_client *client) +{ + struct mt9t031 *mt9t031 = to_mt9t031(client); + s32 data; + int ret; + + ret = mt9t031_s_power(&mt9t031->subdev, 1); + if (ret < 0) + return ret; + + ret = mt9t031_idle(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to initialise the camera\n"); + goto done; + } + + /* Read out the chip version register */ + data = reg_read(client, MT9T031_CHIP_VERSION); + + switch (data) { + case 0x1621: + mt9t031->model = V4L2_IDENT_MT9T031; + break; + default: + dev_err(&client->dev, + "No MT9T031 chip detected, register read %x\n", data); + ret = -ENODEV; + goto done; + } + + dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data); + + ret = v4l2_ctrl_handler_setup(&mt9t031->hdl); + +done: + mt9t031_s_power(&mt9t031->subdev, 0); + + return ret; +} + +static int mt9t031_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + *lines = mt9t031->y_skip_top; + + return 0; +} + +static const struct v4l2_ctrl_ops mt9t031_ctrl_ops = { + .g_volatile_ctrl = mt9t031_g_volatile_ctrl, + .s_ctrl = mt9t031_s_ctrl, +}; + +static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = { + .g_chip_ident = mt9t031_g_chip_ident, + .s_power = mt9t031_s_power, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9t031_g_register, + .s_register = mt9t031_s_register, +#endif +}; + +static int mt9t031_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_SBGGR10_1X10; + return 0; +} + +static int mt9t031_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static int mt9t031_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + if (soc_camera_apply_board_flags(ssdd, cfg) & + V4L2_MBUS_PCLK_SAMPLE_FALLING) + return reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000); + else + return reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000); +} + +static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = { + .s_stream = mt9t031_s_stream, + .s_mbus_fmt = mt9t031_s_fmt, + .g_mbus_fmt = mt9t031_g_fmt, + .try_mbus_fmt = mt9t031_try_fmt, + .s_crop = mt9t031_s_crop, + .g_crop = mt9t031_g_crop, + .cropcap = mt9t031_cropcap, + .enum_mbus_fmt = mt9t031_enum_fmt, + .g_mbus_config = mt9t031_g_mbus_config, + .s_mbus_config = mt9t031_s_mbus_config, +}; + +static struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = { + .g_skip_top_lines = mt9t031_g_skip_top_lines, +}; + +static struct v4l2_subdev_ops mt9t031_subdev_ops = { + .core = &mt9t031_subdev_core_ops, + .video = &mt9t031_subdev_video_ops, + .sensor = &mt9t031_subdev_sensor_ops, +}; + +static int mt9t031_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9t031 *mt9t031; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + int ret; + + if (!ssdd) { + dev_err(&client->dev, "MT9T031 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9t031 = devm_kzalloc(&client->dev, sizeof(struct mt9t031), GFP_KERNEL); + if (!mt9t031) + return -ENOMEM; + + v4l2_i2c_subdev_init(&mt9t031->subdev, client, &mt9t031_subdev_ops); + v4l2_ctrl_handler_init(&mt9t031->hdl, 5); + v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + + /* + * Simulated autoexposure. If enabled, we calculate shutter width + * ourselves in the driver based on vertical blanking and frame width + */ + mt9t031->autoexposure = v4l2_ctrl_new_std_menu(&mt9t031->hdl, + &mt9t031_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, + V4L2_EXPOSURE_AUTO); + mt9t031->exposure = v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops, + V4L2_CID_EXPOSURE, 1, 255, 1, 255); + + mt9t031->subdev.ctrl_handler = &mt9t031->hdl; + if (mt9t031->hdl.error) + return mt9t031->hdl.error; + + v4l2_ctrl_auto_cluster(2, &mt9t031->autoexposure, + V4L2_EXPOSURE_MANUAL, true); + + mt9t031->y_skip_top = 0; + mt9t031->rect.left = MT9T031_COLUMN_SKIP; + mt9t031->rect.top = MT9T031_ROW_SKIP; + mt9t031->rect.width = MT9T031_MAX_WIDTH; + mt9t031->rect.height = MT9T031_MAX_HEIGHT; + + mt9t031->xskip = 1; + mt9t031->yskip = 1; + + ret = mt9t031_video_probe(client); + if (ret) + v4l2_ctrl_handler_free(&mt9t031->hdl); + + return ret; +} + +static int mt9t031_remove(struct i2c_client *client) +{ + struct mt9t031 *mt9t031 = to_mt9t031(client); + + v4l2_device_unregister_subdev(&mt9t031->subdev); + v4l2_ctrl_handler_free(&mt9t031->hdl); + + return 0; +} + +static const struct i2c_device_id mt9t031_id[] = { + { "mt9t031", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9t031_id); + +static struct i2c_driver mt9t031_i2c_driver = { + .driver = { + .name = "mt9t031", + }, + .probe = mt9t031_probe, + .remove = mt9t031_remove, + .id_table = mt9t031_id, +}; + +module_i2c_driver(mt9t031_i2c_driver); + +MODULE_DESCRIPTION("Micron MT9T031 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/mt9t112.c b/drivers/media/i2c/soc_camera/mt9t112.c new file mode 100644 index 00000000..a7256b73 --- /dev/null +++ b/drivers/media/i2c/soc_camera/mt9t112.c @@ -0,0 +1,1145 @@ +/* + * mt9t112 Camera Driver + * + * Copyright (C) 2009 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on ov772x driver, mt9m111 driver, + * + * Copyright (C) 2008 Kuninori Morimoto + * Copyright (C) 2008, Robert Jarzmik + * Copyright 2006-7 Jonathan Corbet + * Copyright (C) 2008 Magnus Damm + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* you can check PLL/clock info */ +/* #define EXT_CLOCK 24000000 */ + +/************************************************************************ + macro +************************************************************************/ +/* + * frame size + */ +#define MAX_WIDTH 2048 +#define MAX_HEIGHT 1536 + +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 + +/* + * macro of read/write + */ +#define ECHECKER(ret, x) \ + do { \ + (ret) = (x); \ + if ((ret) < 0) \ + return (ret); \ + } while (0) + +#define mt9t112_reg_write(ret, client, a, b) \ + ECHECKER(ret, __mt9t112_reg_write(client, a, b)) +#define mt9t112_mcu_write(ret, client, a, b) \ + ECHECKER(ret, __mt9t112_mcu_write(client, a, b)) + +#define mt9t112_reg_mask_set(ret, client, a, b, c) \ + ECHECKER(ret, __mt9t112_reg_mask_set(client, a, b, c)) +#define mt9t112_mcu_mask_set(ret, client, a, b, c) \ + ECHECKER(ret, __mt9t112_mcu_mask_set(client, a, b, c)) + +#define mt9t112_reg_read(ret, client, a) \ + ECHECKER(ret, __mt9t112_reg_read(client, a)) + +/* + * Logical address + */ +#define _VAR(id, offset, base) (base | (id & 0x1f) << 10 | (offset & 0x3ff)) +#define VAR(id, offset) _VAR(id, offset, 0x0000) +#define VAR8(id, offset) _VAR(id, offset, 0x8000) + +/************************************************************************ + struct +************************************************************************/ +struct mt9t112_format { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; + u16 fmt; + u16 order; +}; + +struct mt9t112_priv { + struct v4l2_subdev subdev; + struct mt9t112_camera_info *info; + struct i2c_client *client; + struct v4l2_rect frame; + const struct mt9t112_format *format; + int model; + int num_formats; + u32 flags; +/* for flags */ +#define INIT_DONE (1 << 0) +#define PCLK_RISING (1 << 1) +}; + +/************************************************************************ + supported format +************************************************************************/ + +static const struct mt9t112_format mt9t112_cfmts[] = { + { + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .fmt = 1, + .order = 0, + }, { + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .fmt = 1, + .order = 1, + }, { + .code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .fmt = 1, + .order = 2, + }, { + .code = V4L2_MBUS_FMT_YVYU8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .fmt = 1, + .order = 3, + }, { + .code = V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .fmt = 8, + .order = 2, + }, { + .code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .fmt = 4, + .order = 2, + }, +}; + +/************************************************************************ + general function +************************************************************************/ +static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), + struct mt9t112_priv, + subdev); +} + +static int __mt9t112_reg_read(const struct i2c_client *client, u16 command) +{ + struct i2c_msg msg[2]; + u8 buf[2]; + int ret; + + command = swab16(command); + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 2; + msg[0].buf = (u8 *)&command; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 2; + msg[1].buf = buf; + + /* + * if return value of this function is < 0, + * it mean error. + * else, under 16bit is valid data. + */ + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) + return ret; + + memcpy(&ret, buf, 2); + return swab16(ret); +} + +static int __mt9t112_reg_write(const struct i2c_client *client, + u16 command, u16 data) +{ + struct i2c_msg msg; + u8 buf[4]; + int ret; + + command = swab16(command); + data = swab16(data); + + memcpy(buf + 0, &command, 2); + memcpy(buf + 2, &data, 2); + + msg.addr = client->addr; + msg.flags = 0; + msg.len = 4; + msg.buf = buf; + + /* + * i2c_transfer return message length, + * but this function should return 0 if correct case + */ + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret >= 0) + ret = 0; + + return ret; +} + +static int __mt9t112_reg_mask_set(const struct i2c_client *client, + u16 command, + u16 mask, + u16 set) +{ + int val = __mt9t112_reg_read(client, command); + if (val < 0) + return val; + + val &= ~mask; + val |= set & mask; + + return __mt9t112_reg_write(client, command, val); +} + +/* mcu access */ +static int __mt9t112_mcu_read(const struct i2c_client *client, u16 command) +{ + int ret; + + ret = __mt9t112_reg_write(client, 0x098E, command); + if (ret < 0) + return ret; + + return __mt9t112_reg_read(client, 0x0990); +} + +static int __mt9t112_mcu_write(const struct i2c_client *client, + u16 command, u16 data) +{ + int ret; + + ret = __mt9t112_reg_write(client, 0x098E, command); + if (ret < 0) + return ret; + + return __mt9t112_reg_write(client, 0x0990, data); +} + +static int __mt9t112_mcu_mask_set(const struct i2c_client *client, + u16 command, + u16 mask, + u16 set) +{ + int val = __mt9t112_mcu_read(client, command); + if (val < 0) + return val; + + val &= ~mask; + val |= set & mask; + + return __mt9t112_mcu_write(client, command, val); +} + +static int mt9t112_reset(const struct i2c_client *client) +{ + int ret; + + mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0001); + msleep(1); + mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0000); + + return ret; +} + +#ifndef EXT_CLOCK +#define CLOCK_INFO(a, b) +#else +#define CLOCK_INFO(a, b) mt9t112_clock_info(a, b) +static int mt9t112_clock_info(const struct i2c_client *client, u32 ext) +{ + int m, n, p1, p2, p3, p4, p5, p6, p7; + u32 vco, clk; + char *enable; + + ext /= 1000; /* kbyte order */ + + mt9t112_reg_read(n, client, 0x0012); + p1 = n & 0x000f; + n = n >> 4; + p2 = n & 0x000f; + n = n >> 4; + p3 = n & 0x000f; + + mt9t112_reg_read(n, client, 0x002a); + p4 = n & 0x000f; + n = n >> 4; + p5 = n & 0x000f; + n = n >> 4; + p6 = n & 0x000f; + + mt9t112_reg_read(n, client, 0x002c); + p7 = n & 0x000f; + + mt9t112_reg_read(n, client, 0x0010); + m = n & 0x00ff; + n = (n >> 8) & 0x003f; + + enable = ((6000 > ext) || (54000 < ext)) ? "X" : ""; + dev_dbg(&client->dev, "EXTCLK : %10u K %s\n", ext, enable); + + vco = 2 * m * ext / (n+1); + enable = ((384000 > vco) || (768000 < vco)) ? "X" : ""; + dev_dbg(&client->dev, "VCO : %10u K %s\n", vco, enable); + + clk = vco / (p1+1) / (p2+1); + enable = (96000 < clk) ? "X" : ""; + dev_dbg(&client->dev, "PIXCLK : %10u K %s\n", clk, enable); + + clk = vco / (p3+1); + enable = (768000 < clk) ? "X" : ""; + dev_dbg(&client->dev, "MIPICLK : %10u K %s\n", clk, enable); + + clk = vco / (p6+1); + enable = (96000 < clk) ? "X" : ""; + dev_dbg(&client->dev, "MCU CLK : %10u K %s\n", clk, enable); + + clk = vco / (p5+1); + enable = (54000 < clk) ? "X" : ""; + dev_dbg(&client->dev, "SOC CLK : %10u K %s\n", clk, enable); + + clk = vco / (p4+1); + enable = (70000 < clk) ? "X" : ""; + dev_dbg(&client->dev, "Sensor CLK : %10u K %s\n", clk, enable); + + clk = vco / (p7+1); + dev_dbg(&client->dev, "External sensor : %10u K\n", clk); + + clk = ext / (n+1); + enable = ((2000 > clk) || (24000 < clk)) ? "X" : ""; + dev_dbg(&client->dev, "PFD : %10u K %s\n", clk, enable); + + return 0; +} +#endif + +static void mt9t112_frame_check(u32 *width, u32 *height, u32 *left, u32 *top) +{ + soc_camera_limit_side(left, width, 0, 0, MAX_WIDTH); + soc_camera_limit_side(top, height, 0, 0, MAX_HEIGHT); +} + +static int mt9t112_set_a_frame_size(const struct i2c_client *client, + u16 width, + u16 height) +{ + int ret; + u16 wstart = (MAX_WIDTH - width) / 2; + u16 hstart = (MAX_HEIGHT - height) / 2; + + /* (Context A) Image Width/Height */ + mt9t112_mcu_write(ret, client, VAR(26, 0), width); + mt9t112_mcu_write(ret, client, VAR(26, 2), height); + + /* (Context A) Output Width/Height */ + mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + width); + mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + height); + + /* (Context A) Start Row/Column */ + mt9t112_mcu_write(ret, client, VAR(18, 2), 4 + hstart); + mt9t112_mcu_write(ret, client, VAR(18, 4), 4 + wstart); + + /* (Context A) End Row/Column */ + mt9t112_mcu_write(ret, client, VAR(18, 6), 11 + height + hstart); + mt9t112_mcu_write(ret, client, VAR(18, 8), 11 + width + wstart); + + mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); + + return ret; +} + +static int mt9t112_set_pll_dividers(const struct i2c_client *client, + u8 m, u8 n, + u8 p1, u8 p2, u8 p3, + u8 p4, u8 p5, u8 p6, + u8 p7) +{ + int ret; + u16 val; + + /* N/M */ + val = (n << 8) | + (m << 0); + mt9t112_reg_mask_set(ret, client, 0x0010, 0x3fff, val); + + /* P1/P2/P3 */ + val = ((p3 & 0x0F) << 8) | + ((p2 & 0x0F) << 4) | + ((p1 & 0x0F) << 0); + mt9t112_reg_mask_set(ret, client, 0x0012, 0x0fff, val); + + /* P4/P5/P6 */ + val = (0x7 << 12) | + ((p6 & 0x0F) << 8) | + ((p5 & 0x0F) << 4) | + ((p4 & 0x0F) << 0); + mt9t112_reg_mask_set(ret, client, 0x002A, 0x7fff, val); + + /* P7 */ + val = (0x1 << 12) | + ((p7 & 0x0F) << 0); + mt9t112_reg_mask_set(ret, client, 0x002C, 0x100f, val); + + return ret; +} + +static int mt9t112_init_pll(const struct i2c_client *client) +{ + struct mt9t112_priv *priv = to_mt9t112(client); + int data, i, ret; + + mt9t112_reg_mask_set(ret, client, 0x0014, 0x003, 0x0001); + + /* PLL control: BYPASS PLL = 8517 */ + mt9t112_reg_write(ret, client, 0x0014, 0x2145); + + /* Replace these registers when new timing parameters are generated */ + mt9t112_set_pll_dividers(client, + priv->info->divider.m, + priv->info->divider.n, + priv->info->divider.p1, + priv->info->divider.p2, + priv->info->divider.p3, + priv->info->divider.p4, + priv->info->divider.p5, + priv->info->divider.p6, + priv->info->divider.p7); + + /* + * TEST_BYPASS on + * PLL_ENABLE on + * SEL_LOCK_DET on + * TEST_BYPASS off + */ + mt9t112_reg_write(ret, client, 0x0014, 0x2525); + mt9t112_reg_write(ret, client, 0x0014, 0x2527); + mt9t112_reg_write(ret, client, 0x0014, 0x3427); + mt9t112_reg_write(ret, client, 0x0014, 0x3027); + + mdelay(10); + + /* + * PLL_BYPASS off + * Reference clock count + * I2C Master Clock Divider + */ + mt9t112_reg_write(ret, client, 0x0014, 0x3046); + mt9t112_reg_write(ret, client, 0x0016, 0x0400); /* JPEG initialization workaround */ + mt9t112_reg_write(ret, client, 0x0022, 0x0190); + mt9t112_reg_write(ret, client, 0x3B84, 0x0212); + + /* External sensor clock is PLL bypass */ + mt9t112_reg_write(ret, client, 0x002E, 0x0500); + + mt9t112_reg_mask_set(ret, client, 0x0018, 0x0002, 0x0002); + mt9t112_reg_mask_set(ret, client, 0x3B82, 0x0004, 0x0004); + + /* MCU disabled */ + mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0x0004); + + /* out of standby */ + mt9t112_reg_mask_set(ret, client, 0x0018, 0x0001, 0); + + mdelay(50); + + /* + * Standby Workaround + * Disable Secondary I2C Pads + */ + mt9t112_reg_write(ret, client, 0x0614, 0x0001); + mdelay(1); + mt9t112_reg_write(ret, client, 0x0614, 0x0001); + mdelay(1); + mt9t112_reg_write(ret, client, 0x0614, 0x0001); + mdelay(1); + mt9t112_reg_write(ret, client, 0x0614, 0x0001); + mdelay(1); + mt9t112_reg_write(ret, client, 0x0614, 0x0001); + mdelay(1); + mt9t112_reg_write(ret, client, 0x0614, 0x0001); + mdelay(1); + + /* poll to verify out of standby. Must Poll this bit */ + for (i = 0; i < 100; i++) { + mt9t112_reg_read(data, client, 0x0018); + if (!(0x4000 & data)) + break; + + mdelay(10); + } + + return ret; +} + +static int mt9t112_init_setting(const struct i2c_client *client) +{ + + int ret; + + /* Adaptive Output Clock (A) */ + mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000); + + /* Read Mode (A) */ + mt9t112_mcu_write(ret, client, VAR(18, 12), 0x0024); + + /* Fine Correction (A) */ + mt9t112_mcu_write(ret, client, VAR(18, 15), 0x00CC); + + /* Fine IT Min (A) */ + mt9t112_mcu_write(ret, client, VAR(18, 17), 0x01f1); + + /* Fine IT Max Margin (A) */ + mt9t112_mcu_write(ret, client, VAR(18, 19), 0x00fF); + + /* Base Frame Lines (A) */ + mt9t112_mcu_write(ret, client, VAR(18, 29), 0x032D); + + /* Min Line Length (A) */ + mt9t112_mcu_write(ret, client, VAR(18, 31), 0x073a); + + /* Line Length (A) */ + mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07d0); + + /* Adaptive Output Clock (B) */ + mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000); + + /* Row Start (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 74), 0x004); + + /* Column Start (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 76), 0x004); + + /* Row End (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 78), 0x60B); + + /* Column End (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 80), 0x80B); + + /* Fine Correction (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 87), 0x008C); + + /* Fine IT Min (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 89), 0x01F1); + + /* Fine IT Max Margin (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 91), 0x00FF); + + /* Base Frame Lines (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 101), 0x0668); + + /* Min Line Length (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0AF0); + + /* Line Length (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0AF0); + + /* + * Flicker Dectection registers + * This section should be replaced whenever new Timing file is generated + * All the following registers need to be replaced + * Following registers are generated from Register Wizard but user can + * modify them. For detail see auto flicker detection tuning + */ + + /* FD_FDPERIOD_SELECT */ + mt9t112_mcu_write(ret, client, VAR8(8, 5), 0x01); + + /* PRI_B_CONFIG_FD_ALGO_RUN */ + mt9t112_mcu_write(ret, client, VAR(27, 17), 0x0003); + + /* PRI_A_CONFIG_FD_ALGO_RUN */ + mt9t112_mcu_write(ret, client, VAR(26, 17), 0x0003); + + /* + * AFD range detection tuning registers + */ + + /* search_f1_50 */ + mt9t112_mcu_write(ret, client, VAR8(18, 165), 0x25); + + /* search_f2_50 */ + mt9t112_mcu_write(ret, client, VAR8(18, 166), 0x28); + + /* search_f1_60 */ + mt9t112_mcu_write(ret, client, VAR8(18, 167), 0x2C); + + /* search_f2_60 */ + mt9t112_mcu_write(ret, client, VAR8(18, 168), 0x2F); + + /* period_50Hz (A) */ + mt9t112_mcu_write(ret, client, VAR8(18, 68), 0xBA); + + /* secret register by aptina */ + /* period_50Hz (A MSB) */ + mt9t112_mcu_write(ret, client, VAR8(18, 303), 0x00); + + /* period_60Hz (A) */ + mt9t112_mcu_write(ret, client, VAR8(18, 69), 0x9B); + + /* secret register by aptina */ + /* period_60Hz (A MSB) */ + mt9t112_mcu_write(ret, client, VAR8(18, 301), 0x00); + + /* period_50Hz (B) */ + mt9t112_mcu_write(ret, client, VAR8(18, 140), 0x82); + + /* secret register by aptina */ + /* period_50Hz (B) MSB */ + mt9t112_mcu_write(ret, client, VAR8(18, 304), 0x00); + + /* period_60Hz (B) */ + mt9t112_mcu_write(ret, client, VAR8(18, 141), 0x6D); + + /* secret register by aptina */ + /* period_60Hz (B) MSB */ + mt9t112_mcu_write(ret, client, VAR8(18, 302), 0x00); + + /* FD Mode */ + mt9t112_mcu_write(ret, client, VAR8(8, 2), 0x10); + + /* Stat_min */ + mt9t112_mcu_write(ret, client, VAR8(8, 9), 0x02); + + /* Stat_max */ + mt9t112_mcu_write(ret, client, VAR8(8, 10), 0x03); + + /* Min_amplitude */ + mt9t112_mcu_write(ret, client, VAR8(8, 12), 0x0A); + + /* RX FIFO Watermark (A) */ + mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0014); + + /* RX FIFO Watermark (B) */ + mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0014); + + /* MCLK: 16MHz + * PCLK: 73MHz + * CorePixCLK: 36.5 MHz + */ + mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 133); + mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 110); + mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 130); + mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 108); + + mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 27); + mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 30); + mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 32); + mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 35); + + return ret; +} + +static int mt9t112_auto_focus_setting(const struct i2c_client *client) +{ + int ret; + + mt9t112_mcu_write(ret, client, VAR(12, 13), 0x000F); + mt9t112_mcu_write(ret, client, VAR(12, 23), 0x0F0F); + mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); + + mt9t112_reg_write(ret, client, 0x0614, 0x0000); + + mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05); + mt9t112_mcu_write(ret, client, VAR8(12, 2), 0x02); + mt9t112_mcu_write(ret, client, VAR(12, 3), 0x0002); + mt9t112_mcu_write(ret, client, VAR(17, 3), 0x8001); + mt9t112_mcu_write(ret, client, VAR(17, 11), 0x0025); + mt9t112_mcu_write(ret, client, VAR(17, 13), 0x0193); + mt9t112_mcu_write(ret, client, VAR8(17, 33), 0x18); + mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05); + + return ret; +} + +static int mt9t112_auto_focus_trigger(const struct i2c_client *client) +{ + int ret; + + mt9t112_mcu_write(ret, client, VAR8(12, 25), 0x01); + + return ret; +} + +static int mt9t112_init_camera(const struct i2c_client *client) +{ + int ret; + + ECHECKER(ret, mt9t112_reset(client)); + + ECHECKER(ret, mt9t112_init_pll(client)); + + ECHECKER(ret, mt9t112_init_setting(client)); + + ECHECKER(ret, mt9t112_auto_focus_setting(client)); + + mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0); + + /* Analog setting B */ + mt9t112_reg_write(ret, client, 0x3084, 0x2409); + mt9t112_reg_write(ret, client, 0x3092, 0x0A49); + mt9t112_reg_write(ret, client, 0x3094, 0x4949); + mt9t112_reg_write(ret, client, 0x3096, 0x4950); + + /* + * Disable adaptive clock + * PRI_A_CONFIG_JPEG_OB_TX_CONTROL_VAR + * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR + */ + mt9t112_mcu_write(ret, client, VAR(26, 160), 0x0A2E); + mt9t112_mcu_write(ret, client, VAR(27, 160), 0x0A2E); + + /* Configure STatus in Status_before_length Format and enable header */ + /* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */ + mt9t112_mcu_write(ret, client, VAR(27, 144), 0x0CB4); + + /* Enable JPEG in context B */ + /* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */ + mt9t112_mcu_write(ret, client, VAR8(27, 142), 0x01); + + /* Disable Dac_TXLO */ + mt9t112_reg_write(ret, client, 0x316C, 0x350F); + + /* Set max slew rates */ + mt9t112_reg_write(ret, client, 0x1E, 0x777); + + return ret; +} + +/************************************************************************ + v4l2_subdev_core_ops +************************************************************************/ +static int mt9t112_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t112_priv *priv = to_mt9t112(client); + + id->ident = priv->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9t112_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + reg->size = 2; + mt9t112_reg_read(ret, client, reg->reg); + + reg->val = (__u64)ret; + + return 0; +} + +static int mt9t112_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + mt9t112_reg_write(ret, client, reg->reg, reg->val); + + return ret; +} +#endif + +static int mt9t112_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +static struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = { + .g_chip_ident = mt9t112_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9t112_g_register, + .s_register = mt9t112_s_register, +#endif + .s_power = mt9t112_s_power, +}; + + +/************************************************************************ + v4l2_subdev_video_ops +************************************************************************/ +static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t112_priv *priv = to_mt9t112(client); + int ret = 0; + + if (!enable) { + /* FIXME + * + * If user selected large output size, + * and used it long time, + * mt9t112 camera will be very warm. + * + * But current driver can not stop mt9t112 camera. + * So, set small size here to solve this problem. + */ + mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT); + return ret; + } + + if (!(priv->flags & INIT_DONE)) { + u16 param = PCLK_RISING & priv->flags ? 0x0001 : 0x0000; + + ECHECKER(ret, mt9t112_init_camera(client)); + + /* Invert PCLK (Data sampled on falling edge of pixclk) */ + mt9t112_reg_write(ret, client, 0x3C20, param); + + mdelay(5); + + priv->flags |= INIT_DONE; + } + + mt9t112_mcu_write(ret, client, VAR(26, 7), priv->format->fmt); + mt9t112_mcu_write(ret, client, VAR(26, 9), priv->format->order); + mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); + + mt9t112_set_a_frame_size(client, + priv->frame.width, + priv->frame.height); + + ECHECKER(ret, mt9t112_auto_focus_trigger(client)); + + dev_dbg(&client->dev, "format : %d\n", priv->format->code); + dev_dbg(&client->dev, "size : %d x %d\n", + priv->frame.width, + priv->frame.height); + + CLOCK_INFO(client, EXT_CLOCK); + + return ret; +} + +static int mt9t112_set_params(struct mt9t112_priv *priv, + const struct v4l2_rect *rect, + enum v4l2_mbus_pixelcode code) +{ + int i; + + /* + * get color format + */ + for (i = 0; i < priv->num_formats; i++) + if (mt9t112_cfmts[i].code == code) + break; + + if (i == priv->num_formats) + return -EINVAL; + + priv->frame = *rect; + + /* + * frame size check + */ + mt9t112_frame_check(&priv->frame.width, &priv->frame.height, + &priv->frame.left, &priv->frame.top); + + priv->format = mt9t112_cfmts + i; + + return 0; +} + +static int mt9t112_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = MAX_WIDTH; + a->bounds.height = MAX_HEIGHT; + a->defrect.left = 0; + a->defrect.top = 0; + a->defrect.width = VGA_WIDTH; + a->defrect.height = VGA_HEIGHT; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9t112_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t112_priv *priv = to_mt9t112(client); + + a->c = priv->frame; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9t112_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t112_priv *priv = to_mt9t112(client); + const struct v4l2_rect *rect = &a->c; + + return mt9t112_set_params(priv, rect, priv->format->code); +} + +static int mt9t112_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t112_priv *priv = to_mt9t112(client); + + mf->width = priv->frame.width; + mf->height = priv->frame.height; + mf->colorspace = priv->format->colorspace; + mf->code = priv->format->code; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9t112_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t112_priv *priv = to_mt9t112(client); + struct v4l2_rect rect = { + .width = mf->width, + .height = mf->height, + .left = priv->frame.left, + .top = priv->frame.top, + }; + int ret; + + ret = mt9t112_set_params(priv, &rect, mf->code); + + if (!ret) + mf->colorspace = priv->format->colorspace; + + return ret; +} + +static int mt9t112_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t112_priv *priv = to_mt9t112(client); + unsigned int top, left; + int i; + + for (i = 0; i < priv->num_formats; i++) + if (mt9t112_cfmts[i].code == mf->code) + break; + + if (i == priv->num_formats) { + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + mf->colorspace = V4L2_COLORSPACE_JPEG; + } else { + mf->colorspace = mt9t112_cfmts[i].colorspace; + } + + mt9t112_frame_check(&mf->width, &mf->height, &left, &top); + + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9t112_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t112_priv *priv = to_mt9t112(client); + + if (index >= priv->num_formats) + return -EINVAL; + + *code = mt9t112_cfmts[index].code; + + return 0; +} + +static int mt9t112_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_VSYNC_ACTIVE_HIGH | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH | + V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static int mt9t112_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct mt9t112_priv *priv = to_mt9t112(client); + + if (soc_camera_apply_board_flags(ssdd, cfg) & V4L2_MBUS_PCLK_SAMPLE_RISING) + priv->flags |= PCLK_RISING; + + return 0; +} + +static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { + .s_stream = mt9t112_s_stream, + .g_mbus_fmt = mt9t112_g_fmt, + .s_mbus_fmt = mt9t112_s_fmt, + .try_mbus_fmt = mt9t112_try_fmt, + .cropcap = mt9t112_cropcap, + .g_crop = mt9t112_g_crop, + .s_crop = mt9t112_s_crop, + .enum_mbus_fmt = mt9t112_enum_fmt, + .g_mbus_config = mt9t112_g_mbus_config, + .s_mbus_config = mt9t112_s_mbus_config, +}; + +/************************************************************************ + i2c driver +************************************************************************/ +static struct v4l2_subdev_ops mt9t112_subdev_ops = { + .core = &mt9t112_subdev_core_ops, + .video = &mt9t112_subdev_video_ops, +}; + +static int mt9t112_camera_probe(struct i2c_client *client) +{ + struct mt9t112_priv *priv = to_mt9t112(client); + const char *devname; + int chipid; + int ret; + + ret = mt9t112_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + + /* + * check and show chip ID + */ + mt9t112_reg_read(chipid, client, 0x0000); + + switch (chipid) { + case 0x2680: + devname = "mt9t111"; + priv->model = V4L2_IDENT_MT9T111; + priv->num_formats = 1; + break; + case 0x2682: + devname = "mt9t112"; + priv->model = V4L2_IDENT_MT9T112; + priv->num_formats = ARRAY_SIZE(mt9t112_cfmts); + break; + default: + dev_err(&client->dev, "Product ID error %04x\n", chipid); + ret = -ENODEV; + goto done; + } + + dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid); + +done: + mt9t112_s_power(&priv->subdev, 0); + return ret; +} + +static int mt9t112_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9t112_priv *priv; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct v4l2_rect rect = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .left = (MAX_WIDTH - VGA_WIDTH) / 2, + .top = (MAX_HEIGHT - VGA_HEIGHT) / 2, + }; + int ret; + + if (!ssdd || !ssdd->drv_priv) { + dev_err(&client->dev, "mt9t112: missing platform data!\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->info = ssdd->drv_priv; + + v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops); + + ret = mt9t112_camera_probe(client); + if (ret) + return ret; + + /* Cannot fail: using the default supported pixel code */ + mt9t112_set_params(priv, &rect, V4L2_MBUS_FMT_UYVY8_2X8); + + return ret; +} + +static int mt9t112_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct i2c_device_id mt9t112_id[] = { + { "mt9t112", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9t112_id); + +static struct i2c_driver mt9t112_i2c_driver = { + .driver = { + .name = "mt9t112", + }, + .probe = mt9t112_probe, + .remove = mt9t112_remove, + .id_table = mt9t112_id, +}; + +module_i2c_driver(mt9t112_i2c_driver); + +MODULE_DESCRIPTION("SoC Camera driver for mt9t112"); +MODULE_AUTHOR("Kuninori Morimoto"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/mt9v022.c b/drivers/media/i2c/soc_camera/mt9v022.c new file mode 100644 index 00000000..a295e598 --- /dev/null +++ b/drivers/media/i2c/soc_camera/mt9v022.c @@ -0,0 +1,998 @@ +/* + * Driver for MT9V022 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* + * mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c + * The platform has to define struct i2c_board_info objects and link to them + * from struct soc_camera_host_desc + */ + +static char *sensor_type; +module_param(sensor_type, charp, S_IRUGO); +MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\""); + +/* mt9v022 selected register addresses */ +#define MT9V022_CHIP_VERSION 0x00 +#define MT9V022_COLUMN_START 0x01 +#define MT9V022_ROW_START 0x02 +#define MT9V022_WINDOW_HEIGHT 0x03 +#define MT9V022_WINDOW_WIDTH 0x04 +#define MT9V022_HORIZONTAL_BLANKING 0x05 +#define MT9V022_VERTICAL_BLANKING 0x06 +#define MT9V022_CHIP_CONTROL 0x07 +#define MT9V022_SHUTTER_WIDTH1 0x08 +#define MT9V022_SHUTTER_WIDTH2 0x09 +#define MT9V022_SHUTTER_WIDTH_CTRL 0x0a +#define MT9V022_TOTAL_SHUTTER_WIDTH 0x0b +#define MT9V022_RESET 0x0c +#define MT9V022_READ_MODE 0x0d +#define MT9V022_MONITOR_MODE 0x0e +#define MT9V022_PIXEL_OPERATION_MODE 0x0f +#define MT9V022_LED_OUT_CONTROL 0x1b +#define MT9V022_ADC_MODE_CONTROL 0x1c +#define MT9V022_REG32 0x20 +#define MT9V022_ANALOG_GAIN 0x35 +#define MT9V022_BLACK_LEVEL_CALIB_CTRL 0x47 +#define MT9V022_PIXCLK_FV_LV 0x74 +#define MT9V022_DIGITAL_TEST_PATTERN 0x7f +#define MT9V022_AEC_AGC_ENABLE 0xAF +#define MT9V022_MAX_TOTAL_SHUTTER_WIDTH 0xBD + +/* mt9v024 partial list register addresses changes with respect to mt9v022 */ +#define MT9V024_PIXCLK_FV_LV 0x72 +#define MT9V024_MAX_TOTAL_SHUTTER_WIDTH 0xAD + +/* Progressive scan, master, defaults */ +#define MT9V022_CHIP_CONTROL_DEFAULT 0x188 + +#define MT9V022_MAX_WIDTH 752 +#define MT9V022_MAX_HEIGHT 480 +#define MT9V022_MIN_WIDTH 48 +#define MT9V022_MIN_HEIGHT 32 +#define MT9V022_COLUMN_SKIP 1 +#define MT9V022_ROW_SKIP 4 + +#define MT9V022_HORIZONTAL_BLANKING_MIN 43 +#define MT9V022_HORIZONTAL_BLANKING_MAX 1023 +#define MT9V022_HORIZONTAL_BLANKING_DEF 94 +#define MT9V022_VERTICAL_BLANKING_MIN 2 +#define MT9V022_VERTICAL_BLANKING_MAX 3000 +#define MT9V022_VERTICAL_BLANKING_DEF 45 + +#define is_mt9v022_rev3(id) (id == 0x1313) +#define is_mt9v024(id) (id == 0x1324) + +/* MT9V022 has only one fixed colorspace per pixelcode */ +struct mt9v022_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +/* Find a data format by a pixel code in an array */ +static const struct mt9v022_datafmt *mt9v022_find_datafmt( + enum v4l2_mbus_pixelcode code, const struct mt9v022_datafmt *fmt, + int n) +{ + int i; + for (i = 0; i < n; i++) + if (fmt[i].code == code) + return fmt + i; + + return NULL; +} + +static const struct mt9v022_datafmt mt9v022_colour_fmts[] = { + /* + * Order important: first natively supported, + * second supported with a GPIO extender + */ + {V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, +}; + +static const struct mt9v022_datafmt mt9v022_monochrome_fmts[] = { + /* Order important - see above */ + {V4L2_MBUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, +}; + +/* only registers with different addresses on different mt9v02x sensors */ +struct mt9v02x_register { + u8 max_total_shutter_width; + u8 pixclk_fv_lv; +}; + +static const struct mt9v02x_register mt9v022_register = { + .max_total_shutter_width = MT9V022_MAX_TOTAL_SHUTTER_WIDTH, + .pixclk_fv_lv = MT9V022_PIXCLK_FV_LV, +}; + +static const struct mt9v02x_register mt9v024_register = { + .max_total_shutter_width = MT9V024_MAX_TOTAL_SHUTTER_WIDTH, + .pixclk_fv_lv = MT9V024_PIXCLK_FV_LV, +}; + +struct mt9v022 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct { + /* exposure/auto-exposure cluster */ + struct v4l2_ctrl *autoexposure; + struct v4l2_ctrl *exposure; + }; + struct { + /* gain/auto-gain cluster */ + struct v4l2_ctrl *autogain; + struct v4l2_ctrl *gain; + }; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *vblank; + struct v4l2_rect rect; /* Sensor window */ + const struct mt9v022_datafmt *fmt; + const struct mt9v022_datafmt *fmts; + const struct mt9v02x_register *reg; + int num_fmts; + int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */ + u16 chip_control; + u16 chip_version; + unsigned short y_skip_top; /* Lines to skip at the top */ +}; + +static struct mt9v022 *to_mt9v022(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct mt9v022, subdev); +} + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int reg_set(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret | data); +} + +static int reg_clear(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret & ~data); +} + +static int mt9v022_init(struct i2c_client *client) +{ + struct mt9v022 *mt9v022 = to_mt9v022(client); + int ret; + + /* + * Almost the default mode: master, parallel, simultaneous, and an + * undocumented bit 0x200, which is present in table 7, but not in 8, + * plus snapshot mode to disable scan for now + */ + mt9v022->chip_control |= 0x10; + ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control); + if (!ret) + ret = reg_write(client, MT9V022_READ_MODE, 0x300); + + /* All defaults */ + if (!ret) + /* AEC, AGC on */ + ret = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x3); + if (!ret) + ret = reg_write(client, MT9V022_ANALOG_GAIN, 16); + if (!ret) + ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, 480); + if (!ret) + ret = reg_write(client, mt9v022->reg->max_total_shutter_width, 480); + if (!ret) + /* default - auto */ + ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1); + if (!ret) + ret = reg_write(client, MT9V022_DIGITAL_TEST_PATTERN, 0); + if (!ret) + return v4l2_ctrl_handler_setup(&mt9v022->hdl); + + return ret; +} + +static int mt9v022_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + + if (enable) { + /* Switch to master "normal" mode */ + mt9v022->chip_control &= ~0x10; + if (is_mt9v022_rev3(mt9v022->chip_version) || + is_mt9v024(mt9v022->chip_version)) { + /* + * Unset snapshot mode specific settings: clear bit 9 + * and bit 2 in reg. 0x20 when in normal mode. + */ + if (reg_clear(client, MT9V022_REG32, 0x204)) + return -EIO; + } + } else { + /* Switch to snapshot mode */ + mt9v022->chip_control |= 0x10; + if (is_mt9v022_rev3(mt9v022->chip_version) || + is_mt9v024(mt9v022->chip_version)) { + /* + * Required settings for snapshot mode: set bit 9 + * (RST enable) and bit 2 (CR enable) in reg. 0x20 + * See TechNote TN0960 or TN-09-225. + */ + if (reg_set(client, MT9V022_REG32, 0x204)) + return -EIO; + } + } + + if (reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control) < 0) + return -EIO; + return 0; +} + +static int mt9v022_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + struct v4l2_rect rect = a->c; + int min_row, min_blank; + int ret; + + /* Bayer format - even size lengths */ + if (mt9v022->fmts == mt9v022_colour_fmts) { + rect.width = ALIGN(rect.width, 2); + rect.height = ALIGN(rect.height, 2); + /* Let the user play with the starting pixel */ + } + + soc_camera_limit_side(&rect.left, &rect.width, + MT9V022_COLUMN_SKIP, MT9V022_MIN_WIDTH, MT9V022_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9V022_ROW_SKIP, MT9V022_MIN_HEIGHT, MT9V022_MAX_HEIGHT); + + /* Like in example app. Contradicts the datasheet though */ + ret = reg_read(client, MT9V022_AEC_AGC_ENABLE); + if (ret >= 0) { + if (ret & 1) /* Autoexposure */ + ret = reg_write(client, mt9v022->reg->max_total_shutter_width, + rect.height + mt9v022->y_skip_top + 43); + /* + * If autoexposure is off, there is no need to set + * MT9V022_TOTAL_SHUTTER_WIDTH here. Autoexposure can be off + * only if the user has set exposure manually, using the + * V4L2_CID_EXPOSURE_AUTO with the value V4L2_EXPOSURE_MANUAL. + * In this case the register MT9V022_TOTAL_SHUTTER_WIDTH + * already contains the correct value. + */ + } + /* Setup frame format: defaults apart from width and height */ + if (!ret) + ret = reg_write(client, MT9V022_COLUMN_START, rect.left); + if (!ret) + ret = reg_write(client, MT9V022_ROW_START, rect.top); + /* + * mt9v022: min total row time is 660 columns, min blanking is 43 + * mt9v024: min total row time is 690 columns, min blanking is 61 + */ + if (is_mt9v024(mt9v022->chip_version)) { + min_row = 690; + min_blank = 61; + } else { + min_row = 660; + min_blank = 43; + } + if (!ret) + ret = v4l2_ctrl_s_ctrl(mt9v022->hblank, + rect.width > min_row - min_blank ? + min_blank : min_row - rect.width); + if (!ret) + ret = v4l2_ctrl_s_ctrl(mt9v022->vblank, 45); + if (!ret) + ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect.width); + if (!ret) + ret = reg_write(client, MT9V022_WINDOW_HEIGHT, + rect.height + mt9v022->y_skip_top); + + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "Frame %dx%d pixel\n", rect.width, rect.height); + + mt9v022->rect = rect; + + return 0; +} + +static int mt9v022_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + + a->c = mt9v022->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9v022_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9V022_COLUMN_SKIP; + a->bounds.top = MT9V022_ROW_SKIP; + a->bounds.width = MT9V022_MAX_WIDTH; + a->bounds.height = MT9V022_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9v022_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + + mf->width = mt9v022->rect.width; + mf->height = mt9v022->rect.height; + mf->code = mt9v022->fmt->code; + mf->colorspace = mt9v022->fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9v022_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + struct v4l2_crop a = { + .c = { + .left = mt9v022->rect.left, + .top = mt9v022->rect.top, + .width = mf->width, + .height = mf->height, + }, + }; + int ret; + + /* + * The caller provides a supported format, as verified per call to + * .try_mbus_fmt(), datawidth is from our supported format list + */ + switch (mf->code) { + case V4L2_MBUS_FMT_Y8_1X8: + case V4L2_MBUS_FMT_Y10_1X10: + if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM) + return -EINVAL; + break; + case V4L2_MBUS_FMT_SBGGR8_1X8: + case V4L2_MBUS_FMT_SBGGR10_1X10: + if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC) + return -EINVAL; + break; + default: + return -EINVAL; + } + + /* No support for scaling on this camera, just crop. */ + ret = mt9v022_s_crop(sd, &a); + if (!ret) { + mf->width = mt9v022->rect.width; + mf->height = mt9v022->rect.height; + mt9v022->fmt = mt9v022_find_datafmt(mf->code, + mt9v022->fmts, mt9v022->num_fmts); + mf->colorspace = mt9v022->fmt->colorspace; + } + + return ret; +} + +static int mt9v022_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + const struct mt9v022_datafmt *fmt; + int align = mf->code == V4L2_MBUS_FMT_SBGGR8_1X8 || + mf->code == V4L2_MBUS_FMT_SBGGR10_1X10; + + v4l_bound_align_image(&mf->width, MT9V022_MIN_WIDTH, + MT9V022_MAX_WIDTH, align, + &mf->height, MT9V022_MIN_HEIGHT + mt9v022->y_skip_top, + MT9V022_MAX_HEIGHT + mt9v022->y_skip_top, align, 0); + + fmt = mt9v022_find_datafmt(mf->code, mt9v022->fmts, + mt9v022->num_fmts); + if (!fmt) { + fmt = mt9v022->fmt; + mf->code = fmt->code; + } + + mf->colorspace = fmt->colorspace; + + return 0; +} + +static int mt9v022_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = mt9v022->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v022_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + reg->size = 2; + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9v022_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int mt9v022_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +static int mt9v022_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9v022 *mt9v022 = container_of(ctrl->handler, + struct mt9v022, hdl); + struct v4l2_subdev *sd = &mt9v022->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct v4l2_ctrl *gain = mt9v022->gain; + struct v4l2_ctrl *exp = mt9v022->exposure; + unsigned long range; + int data; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + data = reg_read(client, MT9V022_ANALOG_GAIN); + if (data < 0) + return -EIO; + + range = gain->maximum - gain->minimum; + gain->val = ((data - 16) * range + 24) / 48 + gain->minimum; + return 0; + case V4L2_CID_EXPOSURE_AUTO: + data = reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH); + if (data < 0) + return -EIO; + + range = exp->maximum - exp->minimum; + exp->val = ((data - 1) * range + 239) / 479 + exp->minimum; + return 0; + case V4L2_CID_HBLANK: + data = reg_read(client, MT9V022_HORIZONTAL_BLANKING); + if (data < 0) + return -EIO; + ctrl->val = data; + return 0; + case V4L2_CID_VBLANK: + data = reg_read(client, MT9V022_VERTICAL_BLANKING); + if (data < 0) + return -EIO; + ctrl->val = data; + return 0; + } + return -EINVAL; +} + +static int mt9v022_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9v022 *mt9v022 = container_of(ctrl->handler, + struct mt9v022, hdl); + struct v4l2_subdev *sd = &mt9v022->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->val) + data = reg_set(client, MT9V022_READ_MODE, 0x10); + else + data = reg_clear(client, MT9V022_READ_MODE, 0x10); + if (data < 0) + return -EIO; + return 0; + case V4L2_CID_HFLIP: + if (ctrl->val) + data = reg_set(client, MT9V022_READ_MODE, 0x20); + else + data = reg_clear(client, MT9V022_READ_MODE, 0x20); + if (data < 0) + return -EIO; + return 0; + case V4L2_CID_AUTOGAIN: + if (ctrl->val) { + if (reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0) + return -EIO; + } else { + struct v4l2_ctrl *gain = mt9v022->gain; + /* mt9v022 has minimum == default */ + unsigned long range = gain->maximum - gain->minimum; + /* Valid values 16 to 64, 32 to 64 must be even. */ + unsigned long gain_val = ((gain->val - gain->minimum) * + 48 + range / 2) / range + 16; + + if (gain_val >= 32) + gain_val &= ~1; + + /* + * The user wants to set gain manually, hope, she + * knows, what she's doing... Switch AGC off. + */ + if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0) + return -EIO; + + dev_dbg(&client->dev, "Setting gain from %d to %lu\n", + reg_read(client, MT9V022_ANALOG_GAIN), gain_val); + if (reg_write(client, MT9V022_ANALOG_GAIN, gain_val) < 0) + return -EIO; + } + return 0; + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->val == V4L2_EXPOSURE_AUTO) { + data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1); + } else { + struct v4l2_ctrl *exp = mt9v022->exposure; + unsigned long range = exp->maximum - exp->minimum; + unsigned long shutter = ((exp->val - exp->minimum) * + 479 + range / 2) / range + 1; + + /* + * The user wants to set shutter width manually, hope, + * she knows, what she's doing... Switch AEC off. + */ + data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1); + if (data < 0) + return -EIO; + dev_dbg(&client->dev, "Shutter width from %d to %lu\n", + reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH), + shutter); + if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, + shutter) < 0) + return -EIO; + } + return 0; + case V4L2_CID_HBLANK: + if (reg_write(client, MT9V022_HORIZONTAL_BLANKING, + ctrl->val) < 0) + return -EIO; + return 0; + case V4L2_CID_VBLANK: + if (reg_write(client, MT9V022_VERTICAL_BLANKING, + ctrl->val) < 0) + return -EIO; + return 0; + } + return -EINVAL; +} + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9v022_video_probe(struct i2c_client *client) +{ + struct mt9v022 *mt9v022 = to_mt9v022(client); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + s32 data; + int ret; + unsigned long flags; + + ret = mt9v022_s_power(&mt9v022->subdev, 1); + if (ret < 0) + return ret; + + /* Read out the chip version register */ + data = reg_read(client, MT9V022_CHIP_VERSION); + + /* must be 0x1311, 0x1313 or 0x1324 */ + if (data != 0x1311 && data != 0x1313 && data != 0x1324) { + ret = -ENODEV; + dev_info(&client->dev, "No MT9V022 found, ID register 0x%x\n", + data); + goto ei2c; + } + + mt9v022->chip_version = data; + + mt9v022->reg = is_mt9v024(data) ? &mt9v024_register : + &mt9v022_register; + + /* Soft reset */ + ret = reg_write(client, MT9V022_RESET, 1); + if (ret < 0) + goto ei2c; + /* 15 clock cycles */ + udelay(200); + if (reg_read(client, MT9V022_RESET)) { + dev_err(&client->dev, "Resetting MT9V022 failed!\n"); + if (ret > 0) + ret = -EIO; + goto ei2c; + } + + /* Set monochrome or colour sensor type */ + if (sensor_type && (!strcmp("colour", sensor_type) || + !strcmp("color", sensor_type))) { + ret = reg_write(client, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11); + mt9v022->model = V4L2_IDENT_MT9V022IX7ATC; + mt9v022->fmts = mt9v022_colour_fmts; + } else { + ret = reg_write(client, MT9V022_PIXEL_OPERATION_MODE, 0x11); + mt9v022->model = V4L2_IDENT_MT9V022IX7ATM; + mt9v022->fmts = mt9v022_monochrome_fmts; + } + + if (ret < 0) + goto ei2c; + + mt9v022->num_fmts = 0; + + /* + * This is a 10bit sensor, so by default we only allow 10bit. + * The platform may support different bus widths due to + * different routing of the data lines. + */ + if (ssdd->query_bus_param) + flags = ssdd->query_bus_param(ssdd); + else + flags = SOCAM_DATAWIDTH_10; + + if (flags & SOCAM_DATAWIDTH_10) + mt9v022->num_fmts++; + else + mt9v022->fmts++; + + if (flags & SOCAM_DATAWIDTH_8) + mt9v022->num_fmts++; + + mt9v022->fmt = &mt9v022->fmts[0]; + + dev_info(&client->dev, "Detected a MT9V022 chip ID %x, %s sensor\n", + data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ? + "monochrome" : "colour"); + + ret = mt9v022_init(client); + if (ret < 0) + dev_err(&client->dev, "Failed to initialise the camera\n"); + +ei2c: + mt9v022_s_power(&mt9v022->subdev, 0); + return ret; +} + +static int mt9v022_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + + *lines = mt9v022->y_skip_top; + + return 0; +} + +static const struct v4l2_ctrl_ops mt9v022_ctrl_ops = { + .g_volatile_ctrl = mt9v022_g_volatile_ctrl, + .s_ctrl = mt9v022_s_ctrl, +}; + +static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = { + .g_chip_ident = mt9v022_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v022_g_register, + .s_register = mt9v022_s_register, +#endif + .s_power = mt9v022_s_power, +}; + +static int mt9v022_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9v022 *mt9v022 = to_mt9v022(client); + + if (index >= mt9v022->num_fmts) + return -EINVAL; + + *code = mt9v022->fmts[index].code; + return 0; +} + +static int mt9v022_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE | + V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static int mt9v022_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct mt9v022 *mt9v022 = to_mt9v022(client); + unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg); + unsigned int bps = soc_mbus_get_fmtdesc(mt9v022->fmt->code)->bits_per_sample; + int ret; + u16 pixclk = 0; + + if (ssdd->set_bus_param) { + ret = ssdd->set_bus_param(ssdd, 1 << (bps - 1)); + if (ret) + return ret; + } else if (bps != 10) { + /* + * Without board specific bus width settings we only support the + * sensors native bus width + */ + return -EINVAL; + } + + if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) + pixclk |= 0x10; + + if (!(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)) + pixclk |= 0x1; + + if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)) + pixclk |= 0x2; + + ret = reg_write(client, mt9v022->reg->pixclk_fv_lv, pixclk); + if (ret < 0) + return ret; + + if (!(flags & V4L2_MBUS_MASTER)) + mt9v022->chip_control &= ~0x8; + + ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n", + pixclk, mt9v022->chip_control); + + return 0; +} + +static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = { + .s_stream = mt9v022_s_stream, + .s_mbus_fmt = mt9v022_s_fmt, + .g_mbus_fmt = mt9v022_g_fmt, + .try_mbus_fmt = mt9v022_try_fmt, + .s_crop = mt9v022_s_crop, + .g_crop = mt9v022_g_crop, + .cropcap = mt9v022_cropcap, + .enum_mbus_fmt = mt9v022_enum_fmt, + .g_mbus_config = mt9v022_g_mbus_config, + .s_mbus_config = mt9v022_s_mbus_config, +}; + +static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = { + .g_skip_top_lines = mt9v022_g_skip_top_lines, +}; + +static struct v4l2_subdev_ops mt9v022_subdev_ops = { + .core = &mt9v022_subdev_core_ops, + .video = &mt9v022_subdev_video_ops, + .sensor = &mt9v022_subdev_sensor_ops, +}; + +static int mt9v022_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9v022 *mt9v022; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct mt9v022_platform_data *pdata; + int ret; + + if (!ssdd) { + dev_err(&client->dev, "MT9V022 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9v022 = devm_kzalloc(&client->dev, sizeof(struct mt9v022), GFP_KERNEL); + if (!mt9v022) + return -ENOMEM; + + pdata = ssdd->drv_priv; + v4l2_i2c_subdev_init(&mt9v022->subdev, client, &mt9v022_subdev_ops); + v4l2_ctrl_handler_init(&mt9v022->hdl, 6); + v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + mt9v022->autogain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + mt9v022->gain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + + /* + * Simulated autoexposure. If enabled, we calculate shutter width + * ourselves in the driver based on vertical blanking and frame width + */ + mt9v022->autoexposure = v4l2_ctrl_new_std_menu(&mt9v022->hdl, + &mt9v022_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, + V4L2_EXPOSURE_AUTO); + mt9v022->exposure = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops, + V4L2_CID_EXPOSURE, 1, 255, 1, 255); + + mt9v022->hblank = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops, + V4L2_CID_HBLANK, MT9V022_HORIZONTAL_BLANKING_MIN, + MT9V022_HORIZONTAL_BLANKING_MAX, 1, + MT9V022_HORIZONTAL_BLANKING_DEF); + + mt9v022->vblank = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops, + V4L2_CID_VBLANK, MT9V022_VERTICAL_BLANKING_MIN, + MT9V022_VERTICAL_BLANKING_MAX, 1, + MT9V022_VERTICAL_BLANKING_DEF); + + mt9v022->subdev.ctrl_handler = &mt9v022->hdl; + if (mt9v022->hdl.error) { + int err = mt9v022->hdl.error; + + dev_err(&client->dev, "control initialisation err %d\n", err); + return err; + } + v4l2_ctrl_auto_cluster(2, &mt9v022->autoexposure, + V4L2_EXPOSURE_MANUAL, true); + v4l2_ctrl_auto_cluster(2, &mt9v022->autogain, 0, true); + + mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT; + + /* + * On some platforms the first read out line is corrupted. + * Workaround it by skipping if indicated by platform data. + */ + mt9v022->y_skip_top = pdata ? pdata->y_skip_top : 0; + mt9v022->rect.left = MT9V022_COLUMN_SKIP; + mt9v022->rect.top = MT9V022_ROW_SKIP; + mt9v022->rect.width = MT9V022_MAX_WIDTH; + mt9v022->rect.height = MT9V022_MAX_HEIGHT; + + ret = mt9v022_video_probe(client); + if (ret) + v4l2_ctrl_handler_free(&mt9v022->hdl); + + return ret; +} + +static int mt9v022_remove(struct i2c_client *client) +{ + struct mt9v022 *mt9v022 = to_mt9v022(client); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + v4l2_device_unregister_subdev(&mt9v022->subdev); + if (ssdd->free_bus) + ssdd->free_bus(ssdd); + v4l2_ctrl_handler_free(&mt9v022->hdl); + + return 0; +} +static const struct i2c_device_id mt9v022_id[] = { + { "mt9v022", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v022_id); + +static struct i2c_driver mt9v022_i2c_driver = { + .driver = { + .name = "mt9v022", + }, + .probe = mt9v022_probe, + .remove = mt9v022_remove, + .id_table = mt9v022_id, +}; + +module_i2c_driver(mt9v022_i2c_driver); + +MODULE_DESCRIPTION("Micron MT9V022 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/soc_camera/ov2640.c b/drivers/media/i2c/soc_camera/ov2640.c new file mode 100644 index 00000000..e3168424 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov2640.c @@ -0,0 +1,1153 @@ +/* + * ov2640 Camera Driver + * + * Copyright (C) 2010 Alberto Panizzo + * + * Based on ov772x, ov9640 drivers and previous non merged implementations. + * + * Copyright 2005-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2006, OmniVision + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define VAL_SET(x, mask, rshift, lshift) \ + ((((x) >> rshift) & mask) << lshift) +/* + * DSP registers + * register offset for BANK_SEL == BANK_SEL_DSP + */ +#define R_BYPASS 0x05 /* Bypass DSP */ +#define R_BYPASS_DSP_BYPAS 0x01 /* Bypass DSP, sensor out directly */ +#define R_BYPASS_USE_DSP 0x00 /* Use the internal DSP */ +#define QS 0x44 /* Quantization Scale Factor */ +#define CTRLI 0x50 +#define CTRLI_LP_DP 0x80 +#define CTRLI_ROUND 0x40 +#define CTRLI_V_DIV_SET(x) VAL_SET(x, 0x3, 0, 3) +#define CTRLI_H_DIV_SET(x) VAL_SET(x, 0x3, 0, 0) +#define HSIZE 0x51 /* H_SIZE[7:0] (real/4) */ +#define HSIZE_SET(x) VAL_SET(x, 0xFF, 2, 0) +#define VSIZE 0x52 /* V_SIZE[7:0] (real/4) */ +#define VSIZE_SET(x) VAL_SET(x, 0xFF, 2, 0) +#define XOFFL 0x53 /* OFFSET_X[7:0] */ +#define XOFFL_SET(x) VAL_SET(x, 0xFF, 0, 0) +#define YOFFL 0x54 /* OFFSET_Y[7:0] */ +#define YOFFL_SET(x) VAL_SET(x, 0xFF, 0, 0) +#define VHYX 0x55 /* Offset and size completion */ +#define VHYX_VSIZE_SET(x) VAL_SET(x, 0x1, (8+2), 7) +#define VHYX_HSIZE_SET(x) VAL_SET(x, 0x1, (8+2), 3) +#define VHYX_YOFF_SET(x) VAL_SET(x, 0x3, 8, 4) +#define VHYX_XOFF_SET(x) VAL_SET(x, 0x3, 8, 0) +#define DPRP 0x56 +#define TEST 0x57 /* Horizontal size completion */ +#define TEST_HSIZE_SET(x) VAL_SET(x, 0x1, (9+2), 7) +#define ZMOW 0x5A /* Zoom: Out Width OUTW[7:0] (real/4) */ +#define ZMOW_OUTW_SET(x) VAL_SET(x, 0xFF, 2, 0) +#define ZMOH 0x5B /* Zoom: Out Height OUTH[7:0] (real/4) */ +#define ZMOH_OUTH_SET(x) VAL_SET(x, 0xFF, 2, 0) +#define ZMHH 0x5C /* Zoom: Speed and H&W completion */ +#define ZMHH_ZSPEED_SET(x) VAL_SET(x, 0x0F, 0, 4) +#define ZMHH_OUTH_SET(x) VAL_SET(x, 0x1, (8+2), 2) +#define ZMHH_OUTW_SET(x) VAL_SET(x, 0x3, (8+2), 0) +#define BPADDR 0x7C /* SDE Indirect Register Access: Address */ +#define BPDATA 0x7D /* SDE Indirect Register Access: Data */ +#define CTRL2 0x86 /* DSP Module enable 2 */ +#define CTRL2_DCW_EN 0x20 +#define CTRL2_SDE_EN 0x10 +#define CTRL2_UV_ADJ_EN 0x08 +#define CTRL2_UV_AVG_EN 0x04 +#define CTRL2_CMX_EN 0x01 +#define CTRL3 0x87 /* DSP Module enable 3 */ +#define CTRL3_BPC_EN 0x80 +#define CTRL3_WPC_EN 0x40 +#define SIZEL 0x8C /* Image Size Completion */ +#define SIZEL_HSIZE8_11_SET(x) VAL_SET(x, 0x1, 11, 6) +#define SIZEL_HSIZE8_SET(x) VAL_SET(x, 0x7, 0, 3) +#define SIZEL_VSIZE8_SET(x) VAL_SET(x, 0x7, 0, 0) +#define HSIZE8 0xC0 /* Image Horizontal Size HSIZE[10:3] */ +#define HSIZE8_SET(x) VAL_SET(x, 0xFF, 3, 0) +#define VSIZE8 0xC1 /* Image Vertical Size VSIZE[10:3] */ +#define VSIZE8_SET(x) VAL_SET(x, 0xFF, 3, 0) +#define CTRL0 0xC2 /* DSP Module enable 0 */ +#define CTRL0_AEC_EN 0x80 +#define CTRL0_AEC_SEL 0x40 +#define CTRL0_STAT_SEL 0x20 +#define CTRL0_VFIRST 0x10 +#define CTRL0_YUV422 0x08 +#define CTRL0_YUV_EN 0x04 +#define CTRL0_RGB_EN 0x02 +#define CTRL0_RAW_EN 0x01 +#define CTRL1 0xC3 /* DSP Module enable 1 */ +#define CTRL1_CIP 0x80 +#define CTRL1_DMY 0x40 +#define CTRL1_RAW_GMA 0x20 +#define CTRL1_DG 0x10 +#define CTRL1_AWB 0x08 +#define CTRL1_AWB_GAIN 0x04 +#define CTRL1_LENC 0x02 +#define CTRL1_PRE 0x01 +#define R_DVP_SP 0xD3 /* DVP output speed control */ +#define R_DVP_SP_AUTO_MODE 0x80 +#define R_DVP_SP_DVP_MASK 0x3F /* DVP PCLK = sysclk (48)/[6:0] (YUV0); + * = sysclk (48)/(2*[6:0]) (RAW);*/ +#define IMAGE_MODE 0xDA /* Image Output Format Select */ +#define IMAGE_MODE_Y8_DVP_EN 0x40 +#define IMAGE_MODE_JPEG_EN 0x10 +#define IMAGE_MODE_YUV422 0x00 +#define IMAGE_MODE_RAW10 0x04 /* (DVP) */ +#define IMAGE_MODE_RGB565 0x08 +#define IMAGE_MODE_HREF_VSYNC 0x02 /* HREF timing select in DVP JPEG output + * mode (0 for HREF is same as sensor) */ +#define IMAGE_MODE_LBYTE_FIRST 0x01 /* Byte swap enable for DVP + * 1: Low byte first UYVY (C2[4] =0) + * VYUY (C2[4] =1) + * 0: High byte first YUYV (C2[4]=0) + * YVYU (C2[4] = 1) */ +#define RESET 0xE0 /* Reset */ +#define RESET_MICROC 0x40 +#define RESET_SCCB 0x20 +#define RESET_JPEG 0x10 +#define RESET_DVP 0x04 +#define RESET_IPU 0x02 +#define RESET_CIF 0x01 +#define REGED 0xED /* Register ED */ +#define REGED_CLK_OUT_DIS 0x10 +#define MS_SP 0xF0 /* SCCB Master Speed */ +#define SS_ID 0xF7 /* SCCB Slave ID */ +#define SS_CTRL 0xF8 /* SCCB Slave Control */ +#define SS_CTRL_ADD_AUTO_INC 0x20 +#define SS_CTRL_EN 0x08 +#define SS_CTRL_DELAY_CLK 0x04 +#define SS_CTRL_ACC_EN 0x02 +#define SS_CTRL_SEN_PASS_THR 0x01 +#define MC_BIST 0xF9 /* Microcontroller misc register */ +#define MC_BIST_RESET 0x80 /* Microcontroller Reset */ +#define MC_BIST_BOOT_ROM_SEL 0x40 +#define MC_BIST_12KB_SEL 0x20 +#define MC_BIST_12KB_MASK 0x30 +#define MC_BIST_512KB_SEL 0x08 +#define MC_BIST_512KB_MASK 0x0C +#define MC_BIST_BUSY_BIT_R 0x02 +#define MC_BIST_MC_RES_ONE_SH_W 0x02 +#define MC_BIST_LAUNCH 0x01 +#define BANK_SEL 0xFF /* Register Bank Select */ +#define BANK_SEL_DSP 0x00 +#define BANK_SEL_SENS 0x01 + +/* + * Sensor registers + * register offset for BANK_SEL == BANK_SEL_SENS + */ +#define GAIN 0x00 /* AGC - Gain control gain setting */ +#define COM1 0x03 /* Common control 1 */ +#define COM1_1_DUMMY_FR 0x40 +#define COM1_3_DUMMY_FR 0x80 +#define COM1_7_DUMMY_FR 0xC0 +#define COM1_VWIN_LSB_UXGA 0x0F +#define COM1_VWIN_LSB_SVGA 0x0A +#define COM1_VWIN_LSB_CIF 0x06 +#define REG04 0x04 /* Register 04 */ +#define REG04_DEF 0x20 /* Always set */ +#define REG04_HFLIP_IMG 0x80 /* Horizontal mirror image ON/OFF */ +#define REG04_VFLIP_IMG 0x40 /* Vertical flip image ON/OFF */ +#define REG04_VREF_EN 0x10 +#define REG04_HREF_EN 0x08 +#define REG04_AEC_SET(x) VAL_SET(x, 0x3, 0, 0) +#define REG08 0x08 /* Frame Exposure One-pin Control Pre-charge Row Num */ +#define COM2 0x09 /* Common control 2 */ +#define COM2_SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */ + /* Output drive capability */ +#define COM2_OCAP_Nx_SET(N) (((N) - 1) & 0x03) /* N = [1x .. 4x] */ +#define PID 0x0A /* Product ID Number MSB */ +#define VER 0x0B /* Product ID Number LSB */ +#define COM3 0x0C /* Common control 3 */ +#define COM3_BAND_50H 0x04 /* 0 For Banding at 60H */ +#define COM3_BAND_AUTO 0x02 /* Auto Banding */ +#define COM3_SING_FR_SNAPSH 0x01 /* 0 For enable live video output after the + * snapshot sequence*/ +#define AEC 0x10 /* AEC[9:2] Exposure Value */ +#define CLKRC 0x11 /* Internal clock */ +#define CLKRC_EN 0x80 +#define CLKRC_DIV_SET(x) (((x) - 1) & 0x1F) /* CLK = XVCLK/(x) */ +#define COM7 0x12 /* Common control 7 */ +#define COM7_SRST 0x80 /* Initiates system reset. All registers are + * set to factory default values after which + * the chip resumes normal operation */ +#define COM7_RES_UXGA 0x00 /* Resolution selectors for UXGA */ +#define COM7_RES_SVGA 0x40 /* SVGA */ +#define COM7_RES_CIF 0x20 /* CIF */ +#define COM7_ZOOM_EN 0x04 /* Enable Zoom mode */ +#define COM7_COLOR_BAR_TEST 0x02 /* Enable Color Bar Test Pattern */ +#define COM8 0x13 /* Common control 8 */ +#define COM8_DEF 0xC0 /* Banding filter ON/OFF */ +#define COM8_BNDF_EN 0x20 /* Banding filter ON/OFF */ +#define COM8_AGC_EN 0x04 /* AGC Auto/Manual control selection */ +#define COM8_AEC_EN 0x01 /* Auto/Manual Exposure control */ +#define COM9 0x14 /* Common control 9 + * Automatic gain ceiling - maximum AGC value [7:5]*/ +#define COM9_AGC_GAIN_2x 0x00 /* 000 : 2x */ +#define COM9_AGC_GAIN_4x 0x20 /* 001 : 4x */ +#define COM9_AGC_GAIN_8x 0x40 /* 010 : 8x */ +#define COM9_AGC_GAIN_16x 0x60 /* 011 : 16x */ +#define COM9_AGC_GAIN_32x 0x80 /* 100 : 32x */ +#define COM9_AGC_GAIN_64x 0xA0 /* 101 : 64x */ +#define COM9_AGC_GAIN_128x 0xC0 /* 110 : 128x */ +#define COM10 0x15 /* Common control 10 */ +#define COM10_PCLK_HREF 0x20 /* PCLK output qualified by HREF */ +#define COM10_PCLK_RISE 0x10 /* Data is updated at the rising edge of + * PCLK (user can latch data at the next + * falling edge of PCLK). + * 0 otherwise. */ +#define COM10_HREF_INV 0x08 /* Invert HREF polarity: + * HREF negative for valid data*/ +#define COM10_VSINC_INV 0x02 /* Invert VSYNC polarity */ +#define HSTART 0x17 /* Horizontal Window start MSB 8 bit */ +#define HEND 0x18 /* Horizontal Window end MSB 8 bit */ +#define VSTART 0x19 /* Vertical Window start MSB 8 bit */ +#define VEND 0x1A /* Vertical Window end MSB 8 bit */ +#define MIDH 0x1C /* Manufacturer ID byte - high */ +#define MIDL 0x1D /* Manufacturer ID byte - low */ +#define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */ +#define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */ +#define VV 0x26 /* AGC/AEC Fast mode operating region */ +#define VV_HIGH_TH_SET(x) VAL_SET(x, 0xF, 0, 4) +#define VV_LOW_TH_SET(x) VAL_SET(x, 0xF, 0, 0) +#define REG2A 0x2A /* Dummy pixel insert MSB */ +#define FRARL 0x2B /* Dummy pixel insert LSB */ +#define ADDVFL 0x2D /* LSB of insert dummy lines in Vertical direction */ +#define ADDVFH 0x2E /* MSB of insert dummy lines in Vertical direction */ +#define YAVG 0x2F /* Y/G Channel Average value */ +#define REG32 0x32 /* Common Control 32 */ +#define REG32_PCLK_DIV_2 0x80 /* PCLK freq divided by 2 */ +#define REG32_PCLK_DIV_4 0xC0 /* PCLK freq divided by 4 */ +#define ARCOM2 0x34 /* Zoom: Horizontal start point */ +#define REG45 0x45 /* Register 45 */ +#define FLL 0x46 /* Frame Length Adjustment LSBs */ +#define FLH 0x47 /* Frame Length Adjustment MSBs */ +#define COM19 0x48 /* Zoom: Vertical start point */ +#define ZOOMS 0x49 /* Zoom: Vertical start point */ +#define COM22 0x4B /* Flash light control */ +#define COM25 0x4E /* For Banding operations */ +#define BD50 0x4F /* 50Hz Banding AEC 8 LSBs */ +#define BD60 0x50 /* 60Hz Banding AEC 8 LSBs */ +#define REG5D 0x5D /* AVGsel[7:0], 16-zone average weight option */ +#define REG5E 0x5E /* AVGsel[15:8], 16-zone average weight option */ +#define REG5F 0x5F /* AVGsel[23:16], 16-zone average weight option */ +#define REG60 0x60 /* AVGsel[31:24], 16-zone average weight option */ +#define HISTO_LOW 0x61 /* Histogram Algorithm Low Level */ +#define HISTO_HIGH 0x62 /* Histogram Algorithm High Level */ + +/* + * ID + */ +#define MANUFACTURER_ID 0x7FA2 +#define PID_OV2640 0x2642 +#define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF)) + +/* + * Struct + */ +struct regval_list { + u8 reg_num; + u8 value; +}; + +/* Supported resolutions */ +enum ov2640_width { + W_QCIF = 176, + W_QVGA = 320, + W_CIF = 352, + W_VGA = 640, + W_SVGA = 800, + W_XGA = 1024, + W_SXGA = 1280, + W_UXGA = 1600, +}; + +enum ov2640_height { + H_QCIF = 144, + H_QVGA = 240, + H_CIF = 288, + H_VGA = 480, + H_SVGA = 600, + H_XGA = 768, + H_SXGA = 1024, + H_UXGA = 1200, +}; + +struct ov2640_win_size { + char *name; + enum ov2640_width width; + enum ov2640_height height; + const struct regval_list *regs; +}; + + +struct ov2640_priv { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + enum v4l2_mbus_pixelcode cfmt_code; + const struct ov2640_win_size *win; + int model; +}; + +/* + * Registers settings + */ + +#define ENDMARKER { 0xff, 0xff } + +static const struct regval_list ov2640_init_regs[] = { + { BANK_SEL, BANK_SEL_DSP }, + { 0x2c, 0xff }, + { 0x2e, 0xdf }, + { BANK_SEL, BANK_SEL_SENS }, + { 0x3c, 0x32 }, + { CLKRC, CLKRC_DIV_SET(1) }, + { COM2, COM2_OCAP_Nx_SET(3) }, + { REG04, REG04_DEF | REG04_HREF_EN }, + { COM8, COM8_DEF | COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN }, + { COM9, COM9_AGC_GAIN_8x | 0x08}, + { 0x2c, 0x0c }, + { 0x33, 0x78 }, + { 0x3a, 0x33 }, + { 0x3b, 0xfb }, + { 0x3e, 0x00 }, + { 0x43, 0x11 }, + { 0x16, 0x10 }, + { 0x39, 0x02 }, + { 0x35, 0x88 }, + { 0x22, 0x0a }, + { 0x37, 0x40 }, + { 0x23, 0x00 }, + { ARCOM2, 0xa0 }, + { 0x06, 0x02 }, + { 0x06, 0x88 }, + { 0x07, 0xc0 }, + { 0x0d, 0xb7 }, + { 0x0e, 0x01 }, + { 0x4c, 0x00 }, + { 0x4a, 0x81 }, + { 0x21, 0x99 }, + { AEW, 0x40 }, + { AEB, 0x38 }, + { VV, VV_HIGH_TH_SET(0x08) | VV_LOW_TH_SET(0x02) }, + { 0x5c, 0x00 }, + { 0x63, 0x00 }, + { FLL, 0x22 }, + { COM3, 0x38 | COM3_BAND_AUTO }, + { REG5D, 0x55 }, + { REG5E, 0x7d }, + { REG5F, 0x7d }, + { REG60, 0x55 }, + { HISTO_LOW, 0x70 }, + { HISTO_HIGH, 0x80 }, + { 0x7c, 0x05 }, + { 0x20, 0x80 }, + { 0x28, 0x30 }, + { 0x6c, 0x00 }, + { 0x6d, 0x80 }, + { 0x6e, 0x00 }, + { 0x70, 0x02 }, + { 0x71, 0x94 }, + { 0x73, 0xc1 }, + { 0x3d, 0x34 }, + { COM7, COM7_RES_UXGA | COM7_ZOOM_EN }, + { 0x5a, 0x57 }, + { BD50, 0xbb }, + { BD60, 0x9c }, + { BANK_SEL, BANK_SEL_DSP }, + { 0xe5, 0x7f }, + { MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL }, + { 0x41, 0x24 }, + { RESET, RESET_JPEG | RESET_DVP }, + { 0x76, 0xff }, + { 0x33, 0xa0 }, + { 0x42, 0x20 }, + { 0x43, 0x18 }, + { 0x4c, 0x00 }, + { CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 }, + { 0x88, 0x3f }, + { 0xd7, 0x03 }, + { 0xd9, 0x10 }, + { R_DVP_SP , R_DVP_SP_AUTO_MODE | 0x2 }, + { 0xc8, 0x08 }, + { 0xc9, 0x80 }, + { BPADDR, 0x00 }, + { BPDATA, 0x00 }, + { BPADDR, 0x03 }, + { BPDATA, 0x48 }, + { BPDATA, 0x48 }, + { BPADDR, 0x08 }, + { BPDATA, 0x20 }, + { BPDATA, 0x10 }, + { BPDATA, 0x0e }, + { 0x90, 0x00 }, + { 0x91, 0x0e }, + { 0x91, 0x1a }, + { 0x91, 0x31 }, + { 0x91, 0x5a }, + { 0x91, 0x69 }, + { 0x91, 0x75 }, + { 0x91, 0x7e }, + { 0x91, 0x88 }, + { 0x91, 0x8f }, + { 0x91, 0x96 }, + { 0x91, 0xa3 }, + { 0x91, 0xaf }, + { 0x91, 0xc4 }, + { 0x91, 0xd7 }, + { 0x91, 0xe8 }, + { 0x91, 0x20 }, + { 0x92, 0x00 }, + { 0x93, 0x06 }, + { 0x93, 0xe3 }, + { 0x93, 0x03 }, + { 0x93, 0x03 }, + { 0x93, 0x00 }, + { 0x93, 0x02 }, + { 0x93, 0x00 }, + { 0x93, 0x00 }, + { 0x93, 0x00 }, + { 0x93, 0x00 }, + { 0x93, 0x00 }, + { 0x93, 0x00 }, + { 0x93, 0x00 }, + { 0x96, 0x00 }, + { 0x97, 0x08 }, + { 0x97, 0x19 }, + { 0x97, 0x02 }, + { 0x97, 0x0c }, + { 0x97, 0x24 }, + { 0x97, 0x30 }, + { 0x97, 0x28 }, + { 0x97, 0x26 }, + { 0x97, 0x02 }, + { 0x97, 0x98 }, + { 0x97, 0x80 }, + { 0x97, 0x00 }, + { 0x97, 0x00 }, + { 0xa4, 0x00 }, + { 0xa8, 0x00 }, + { 0xc5, 0x11 }, + { 0xc6, 0x51 }, + { 0xbf, 0x80 }, + { 0xc7, 0x10 }, + { 0xb6, 0x66 }, + { 0xb8, 0xA5 }, + { 0xb7, 0x64 }, + { 0xb9, 0x7C }, + { 0xb3, 0xaf }, + { 0xb4, 0x97 }, + { 0xb5, 0xFF }, + { 0xb0, 0xC5 }, + { 0xb1, 0x94 }, + { 0xb2, 0x0f }, + { 0xc4, 0x5c }, + { 0xa6, 0x00 }, + { 0xa7, 0x20 }, + { 0xa7, 0xd8 }, + { 0xa7, 0x1b }, + { 0xa7, 0x31 }, + { 0xa7, 0x00 }, + { 0xa7, 0x18 }, + { 0xa7, 0x20 }, + { 0xa7, 0xd8 }, + { 0xa7, 0x19 }, + { 0xa7, 0x31 }, + { 0xa7, 0x00 }, + { 0xa7, 0x18 }, + { 0xa7, 0x20 }, + { 0xa7, 0xd8 }, + { 0xa7, 0x19 }, + { 0xa7, 0x31 }, + { 0xa7, 0x00 }, + { 0xa7, 0x18 }, + { 0x7f, 0x00 }, + { 0xe5, 0x1f }, + { 0xe1, 0x77 }, + { 0xdd, 0x7f }, + { CTRL0, CTRL0_YUV422 | CTRL0_YUV_EN | CTRL0_RGB_EN }, + ENDMARKER, +}; + +/* + * Register settings for window size + * The preamble, setup the internal DSP to input an UXGA (1600x1200) image. + * Then the different zooming configurations will setup the output image size. + */ +static const struct regval_list ov2640_size_change_preamble_regs[] = { + { BANK_SEL, BANK_SEL_DSP }, + { RESET, RESET_DVP }, + { HSIZE8, HSIZE8_SET(W_UXGA) }, + { VSIZE8, VSIZE8_SET(H_UXGA) }, + { CTRL2, CTRL2_DCW_EN | CTRL2_SDE_EN | + CTRL2_UV_AVG_EN | CTRL2_CMX_EN | CTRL2_UV_ADJ_EN }, + { HSIZE, HSIZE_SET(W_UXGA) }, + { VSIZE, VSIZE_SET(H_UXGA) }, + { XOFFL, XOFFL_SET(0) }, + { YOFFL, YOFFL_SET(0) }, + { VHYX, VHYX_HSIZE_SET(W_UXGA) | VHYX_VSIZE_SET(H_UXGA) | + VHYX_XOFF_SET(0) | VHYX_YOFF_SET(0)}, + { TEST, TEST_HSIZE_SET(W_UXGA) }, + ENDMARKER, +}; + +#define PER_SIZE_REG_SEQ(x, y, v_div, h_div, pclk_div) \ + { CTRLI, CTRLI_LP_DP | CTRLI_V_DIV_SET(v_div) | \ + CTRLI_H_DIV_SET(h_div)}, \ + { ZMOW, ZMOW_OUTW_SET(x) }, \ + { ZMOH, ZMOH_OUTH_SET(y) }, \ + { ZMHH, ZMHH_OUTW_SET(x) | ZMHH_OUTH_SET(y) }, \ + { R_DVP_SP, pclk_div }, \ + { RESET, 0x00} + +static const struct regval_list ov2640_qcif_regs[] = { + PER_SIZE_REG_SEQ(W_QCIF, H_QCIF, 3, 3, 4), + ENDMARKER, +}; + +static const struct regval_list ov2640_qvga_regs[] = { + PER_SIZE_REG_SEQ(W_QVGA, H_QVGA, 2, 2, 4), + ENDMARKER, +}; + +static const struct regval_list ov2640_cif_regs[] = { + PER_SIZE_REG_SEQ(W_CIF, H_CIF, 2, 2, 8), + ENDMARKER, +}; + +static const struct regval_list ov2640_vga_regs[] = { + PER_SIZE_REG_SEQ(W_VGA, H_VGA, 0, 0, 2), + ENDMARKER, +}; + +static const struct regval_list ov2640_svga_regs[] = { + PER_SIZE_REG_SEQ(W_SVGA, H_SVGA, 1, 1, 2), + ENDMARKER, +}; + +static const struct regval_list ov2640_xga_regs[] = { + PER_SIZE_REG_SEQ(W_XGA, H_XGA, 0, 0, 2), + { CTRLI, 0x00}, + ENDMARKER, +}; + +static const struct regval_list ov2640_sxga_regs[] = { + PER_SIZE_REG_SEQ(W_SXGA, H_SXGA, 0, 0, 2), + { CTRLI, 0x00}, + { R_DVP_SP, 2 | R_DVP_SP_AUTO_MODE }, + ENDMARKER, +}; + +static const struct regval_list ov2640_uxga_regs[] = { + PER_SIZE_REG_SEQ(W_UXGA, H_UXGA, 0, 0, 0), + { CTRLI, 0x00}, + { R_DVP_SP, 0 | R_DVP_SP_AUTO_MODE }, + ENDMARKER, +}; + +#define OV2640_SIZE(n, w, h, r) \ + {.name = n, .width = w , .height = h, .regs = r } + +static const struct ov2640_win_size ov2640_supported_win_sizes[] = { + OV2640_SIZE("QCIF", W_QCIF, H_QCIF, ov2640_qcif_regs), + OV2640_SIZE("QVGA", W_QVGA, H_QVGA, ov2640_qvga_regs), + OV2640_SIZE("CIF", W_CIF, H_CIF, ov2640_cif_regs), + OV2640_SIZE("VGA", W_VGA, H_VGA, ov2640_vga_regs), + OV2640_SIZE("SVGA", W_SVGA, H_SVGA, ov2640_svga_regs), + OV2640_SIZE("XGA", W_XGA, H_XGA, ov2640_xga_regs), + OV2640_SIZE("SXGA", W_SXGA, H_SXGA, ov2640_sxga_regs), + OV2640_SIZE("UXGA", W_UXGA, H_UXGA, ov2640_uxga_regs), +}; + +/* + * Register settings for pixel formats + */ +static const struct regval_list ov2640_format_change_preamble_regs[] = { + { BANK_SEL, BANK_SEL_DSP }, + { R_BYPASS, R_BYPASS_USE_DSP }, + ENDMARKER, +}; + +static const struct regval_list ov2640_yuyv_regs[] = { + { IMAGE_MODE, IMAGE_MODE_YUV422 }, + { 0xd7, 0x03 }, + { 0x33, 0xa0 }, + { 0xe5, 0x1f }, + { 0xe1, 0x67 }, + { RESET, 0x00 }, + { R_BYPASS, R_BYPASS_USE_DSP }, + ENDMARKER, +}; + +static const struct regval_list ov2640_uyvy_regs[] = { + { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_YUV422 }, + { 0xd7, 0x01 }, + { 0x33, 0xa0 }, + { 0xe1, 0x67 }, + { RESET, 0x00 }, + { R_BYPASS, R_BYPASS_USE_DSP }, + ENDMARKER, +}; + +static const struct regval_list ov2640_rgb565_be_regs[] = { + { IMAGE_MODE, IMAGE_MODE_RGB565 }, + { 0xd7, 0x03 }, + { RESET, 0x00 }, + { R_BYPASS, R_BYPASS_USE_DSP }, + ENDMARKER, +}; + +static const struct regval_list ov2640_rgb565_le_regs[] = { + { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_RGB565 }, + { 0xd7, 0x03 }, + { RESET, 0x00 }, + { R_BYPASS, R_BYPASS_USE_DSP }, + ENDMARKER, +}; + +static enum v4l2_mbus_pixelcode ov2640_codes[] = { + V4L2_MBUS_FMT_YUYV8_2X8, + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_RGB565_2X8_BE, + V4L2_MBUS_FMT_RGB565_2X8_LE, +}; + +/* + * General functions + */ +static struct ov2640_priv *to_ov2640(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct ov2640_priv, + subdev); +} + +static int ov2640_write_array(struct i2c_client *client, + const struct regval_list *vals) +{ + int ret; + + while ((vals->reg_num != 0xff) || (vals->value != 0xff)) { + ret = i2c_smbus_write_byte_data(client, + vals->reg_num, vals->value); + dev_vdbg(&client->dev, "array: 0x%02x, 0x%02x", + vals->reg_num, vals->value); + + if (ret < 0) + return ret; + vals++; + } + return 0; +} + +static int ov2640_mask_set(struct i2c_client *client, + u8 reg, u8 mask, u8 set) +{ + s32 val = i2c_smbus_read_byte_data(client, reg); + if (val < 0) + return val; + + val &= ~mask; + val |= set & mask; + + dev_vdbg(&client->dev, "masks: 0x%02x, 0x%02x", reg, val); + + return i2c_smbus_write_byte_data(client, reg, val); +} + +static int ov2640_reset(struct i2c_client *client) +{ + int ret; + const struct regval_list reset_seq[] = { + {BANK_SEL, BANK_SEL_SENS}, + {COM7, COM7_SRST}, + ENDMARKER, + }; + + ret = ov2640_write_array(client, reset_seq); + if (ret) + goto err; + + msleep(5); +err: + dev_dbg(&client->dev, "%s: (ret %d)", __func__, ret); + return ret; +} + +/* + * soc_camera_ops functions + */ +static int ov2640_s_stream(struct v4l2_subdev *sd, int enable) +{ + return 0; +} + +static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = + &container_of(ctrl->handler, struct ov2640_priv, hdl)->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 val; + int ret; + + ret = i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS); + if (ret < 0) + return ret; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + val = ctrl->val ? REG04_VFLIP_IMG : 0x00; + return ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val); + case V4L2_CID_HFLIP: + val = ctrl->val ? REG04_HFLIP_IMG : 0x00; + return ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val); + } + + return -EINVAL; +} + +static int ov2640_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov2640_priv *priv = to_ov2640(client); + + id->ident = priv->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov2640_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + reg->size = 1; + if (reg->reg > 0xff) + return -EINVAL; + + ret = i2c_smbus_read_byte_data(client, reg->reg); + if (ret < 0) + return ret; + + reg->val = ret; + + return 0; +} + +static int ov2640_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg > 0xff || + reg->val > 0xff) + return -EINVAL; + + return i2c_smbus_write_byte_data(client, reg->reg, reg->val); +} +#endif + +static int ov2640_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +/* Select the nearest higher resolution for capture */ +static const struct ov2640_win_size *ov2640_select_win(u32 *width, u32 *height) +{ + int i, default_size = ARRAY_SIZE(ov2640_supported_win_sizes) - 1; + + for (i = 0; i < ARRAY_SIZE(ov2640_supported_win_sizes); i++) { + if (ov2640_supported_win_sizes[i].width >= *width && + ov2640_supported_win_sizes[i].height >= *height) { + *width = ov2640_supported_win_sizes[i].width; + *height = ov2640_supported_win_sizes[i].height; + return &ov2640_supported_win_sizes[i]; + } + } + + *width = ov2640_supported_win_sizes[default_size].width; + *height = ov2640_supported_win_sizes[default_size].height; + return &ov2640_supported_win_sizes[default_size]; +} + +static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height, + enum v4l2_mbus_pixelcode code) +{ + struct ov2640_priv *priv = to_ov2640(client); + const struct regval_list *selected_cfmt_regs; + int ret; + + /* select win */ + priv->win = ov2640_select_win(width, height); + + /* select format */ + priv->cfmt_code = 0; + switch (code) { + case V4L2_MBUS_FMT_RGB565_2X8_BE: + dev_dbg(&client->dev, "%s: Selected cfmt RGB565 BE", __func__); + selected_cfmt_regs = ov2640_rgb565_be_regs; + break; + case V4L2_MBUS_FMT_RGB565_2X8_LE: + dev_dbg(&client->dev, "%s: Selected cfmt RGB565 LE", __func__); + selected_cfmt_regs = ov2640_rgb565_le_regs; + break; + case V4L2_MBUS_FMT_YUYV8_2X8: + dev_dbg(&client->dev, "%s: Selected cfmt YUYV (YUV422)", __func__); + selected_cfmt_regs = ov2640_yuyv_regs; + break; + default: + case V4L2_MBUS_FMT_UYVY8_2X8: + dev_dbg(&client->dev, "%s: Selected cfmt UYVY", __func__); + selected_cfmt_regs = ov2640_uyvy_regs; + } + + /* reset hardware */ + ov2640_reset(client); + + /* initialize the sensor with default data */ + dev_dbg(&client->dev, "%s: Init default", __func__); + ret = ov2640_write_array(client, ov2640_init_regs); + if (ret < 0) + goto err; + + /* select preamble */ + dev_dbg(&client->dev, "%s: Set size to %s", __func__, priv->win->name); + ret = ov2640_write_array(client, ov2640_size_change_preamble_regs); + if (ret < 0) + goto err; + + /* set size win */ + ret = ov2640_write_array(client, priv->win->regs); + if (ret < 0) + goto err; + + /* cfmt preamble */ + dev_dbg(&client->dev, "%s: Set cfmt", __func__); + ret = ov2640_write_array(client, ov2640_format_change_preamble_regs); + if (ret < 0) + goto err; + + /* set cfmt */ + ret = ov2640_write_array(client, selected_cfmt_regs); + if (ret < 0) + goto err; + + priv->cfmt_code = code; + *width = priv->win->width; + *height = priv->win->height; + + return 0; + +err: + dev_err(&client->dev, "%s: Error %d", __func__, ret); + ov2640_reset(client); + priv->win = NULL; + + return ret; +} + +static int ov2640_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov2640_priv *priv = to_ov2640(client); + + if (!priv->win) { + u32 width = W_SVGA, height = H_SVGA; + priv->win = ov2640_select_win(&width, &height); + priv->cfmt_code = V4L2_MBUS_FMT_UYVY8_2X8; + } + + mf->width = priv->win->width; + mf->height = priv->win->height; + mf->code = priv->cfmt_code; + + switch (mf->code) { + case V4L2_MBUS_FMT_RGB565_2X8_BE: + case V4L2_MBUS_FMT_RGB565_2X8_LE: + mf->colorspace = V4L2_COLORSPACE_SRGB; + break; + default: + case V4L2_MBUS_FMT_YUYV8_2X8: + case V4L2_MBUS_FMT_UYVY8_2X8: + mf->colorspace = V4L2_COLORSPACE_JPEG; + } + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int ov2640_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + + switch (mf->code) { + case V4L2_MBUS_FMT_RGB565_2X8_BE: + case V4L2_MBUS_FMT_RGB565_2X8_LE: + mf->colorspace = V4L2_COLORSPACE_SRGB; + break; + default: + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + case V4L2_MBUS_FMT_YUYV8_2X8: + case V4L2_MBUS_FMT_UYVY8_2X8: + mf->colorspace = V4L2_COLORSPACE_JPEG; + } + + ret = ov2640_set_params(client, &mf->width, &mf->height, mf->code); + + return ret; +} + +static int ov2640_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + /* + * select suitable win, but don't store it + */ + ov2640_select_win(&mf->width, &mf->height); + + mf->field = V4L2_FIELD_NONE; + + switch (mf->code) { + case V4L2_MBUS_FMT_RGB565_2X8_BE: + case V4L2_MBUS_FMT_RGB565_2X8_LE: + mf->colorspace = V4L2_COLORSPACE_SRGB; + break; + default: + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + case V4L2_MBUS_FMT_YUYV8_2X8: + case V4L2_MBUS_FMT_UYVY8_2X8: + mf->colorspace = V4L2_COLORSPACE_JPEG; + } + + return 0; +} + +static int ov2640_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(ov2640_codes)) + return -EINVAL; + + *code = ov2640_codes[index]; + return 0; +} + +static int ov2640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + a->c.left = 0; + a->c.top = 0; + a->c.width = W_UXGA; + a->c.height = H_UXGA; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int ov2640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = W_UXGA; + a->bounds.height = H_UXGA; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ov2640_video_probe(struct i2c_client *client) +{ + struct ov2640_priv *priv = to_ov2640(client); + u8 pid, ver, midh, midl; + const char *devname; + int ret; + + ret = ov2640_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + + /* + * check and show product ID and manufacturer ID + */ + i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS); + pid = i2c_smbus_read_byte_data(client, PID); + ver = i2c_smbus_read_byte_data(client, VER); + midh = i2c_smbus_read_byte_data(client, MIDH); + midl = i2c_smbus_read_byte_data(client, MIDL); + + switch (VERSION(pid, ver)) { + case PID_OV2640: + devname = "ov2640"; + priv->model = V4L2_IDENT_OV2640; + break; + default: + dev_err(&client->dev, + "Product ID error %x:%x\n", pid, ver); + ret = -ENODEV; + goto done; + } + + dev_info(&client->dev, + "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", + devname, pid, ver, midh, midl); + + ret = v4l2_ctrl_handler_setup(&priv->hdl); + +done: + ov2640_s_power(&priv->subdev, 0); + return ret; +} + +static const struct v4l2_ctrl_ops ov2640_ctrl_ops = { + .s_ctrl = ov2640_s_ctrl, +}; + +static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = { + .g_chip_ident = ov2640_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov2640_g_register, + .s_register = ov2640_s_register, +#endif + .s_power = ov2640_s_power, +}; + +static int ov2640_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = { + .s_stream = ov2640_s_stream, + .g_mbus_fmt = ov2640_g_fmt, + .s_mbus_fmt = ov2640_s_fmt, + .try_mbus_fmt = ov2640_try_fmt, + .cropcap = ov2640_cropcap, + .g_crop = ov2640_g_crop, + .enum_mbus_fmt = ov2640_enum_fmt, + .g_mbus_config = ov2640_g_mbus_config, +}; + +static struct v4l2_subdev_ops ov2640_subdev_ops = { + .core = &ov2640_subdev_core_ops, + .video = &ov2640_subdev_video_ops, +}; + +/* + * i2c_driver functions + */ +static int ov2640_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov2640_priv *priv; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + int ret; + + if (!ssdd) { + dev_err(&adapter->dev, + "OV2640: Missing platform_data for driver\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&adapter->dev, + "OV2640: I2C-Adapter doesn't support SMBUS\n"); + return -EIO; + } + + priv = devm_kzalloc(&client->dev, sizeof(struct ov2640_priv), GFP_KERNEL); + if (!priv) { + dev_err(&adapter->dev, + "Failed to allocate memory for private data!\n"); + return -ENOMEM; + } + + v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops); + v4l2_ctrl_handler_init(&priv->hdl, 2); + v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + priv->subdev.ctrl_handler = &priv->hdl; + if (priv->hdl.error) + return priv->hdl.error; + + ret = ov2640_video_probe(client); + if (ret) + v4l2_ctrl_handler_free(&priv->hdl); + else + dev_info(&adapter->dev, "OV2640 Probed\n"); + + return ret; +} + +static int ov2640_remove(struct i2c_client *client) +{ + struct ov2640_priv *priv = to_ov2640(client); + + v4l2_device_unregister_subdev(&priv->subdev); + v4l2_ctrl_handler_free(&priv->hdl); + return 0; +} + +static const struct i2c_device_id ov2640_id[] = { + { "ov2640", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov2640_id); + +static struct i2c_driver ov2640_i2c_driver = { + .driver = { + .name = "ov2640", + }, + .probe = ov2640_probe, + .remove = ov2640_remove, + .id_table = ov2640_id, +}; + +module_i2c_driver(ov2640_i2c_driver); + +MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor"); +MODULE_AUTHOR("Alberto Panizzo"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c new file mode 100644 index 00000000..9aa56de6 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov5642.c @@ -0,0 +1,1077 @@ +/* + * Driver for OV5642 CMOS Image Sensor from Omnivision + * + * Copyright (C) 2011, Bastian Hecht + * + * Based on Sony IMX074 Camera Driver + * Copyright (C) 2010, Guennadi Liakhovetski + * + * Based on Omnivision OV7670 Camera Driver + * Copyright (C) 2006-7 Jonathan Corbet + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* OV5642 registers */ +#define REG_CHIP_ID_HIGH 0x300a +#define REG_CHIP_ID_LOW 0x300b + +#define REG_WINDOW_START_X_HIGH 0x3800 +#define REG_WINDOW_START_X_LOW 0x3801 +#define REG_WINDOW_START_Y_HIGH 0x3802 +#define REG_WINDOW_START_Y_LOW 0x3803 +#define REG_WINDOW_WIDTH_HIGH 0x3804 +#define REG_WINDOW_WIDTH_LOW 0x3805 +#define REG_WINDOW_HEIGHT_HIGH 0x3806 +#define REG_WINDOW_HEIGHT_LOW 0x3807 +#define REG_OUT_WIDTH_HIGH 0x3808 +#define REG_OUT_WIDTH_LOW 0x3809 +#define REG_OUT_HEIGHT_HIGH 0x380a +#define REG_OUT_HEIGHT_LOW 0x380b +#define REG_OUT_TOTAL_WIDTH_HIGH 0x380c +#define REG_OUT_TOTAL_WIDTH_LOW 0x380d +#define REG_OUT_TOTAL_HEIGHT_HIGH 0x380e +#define REG_OUT_TOTAL_HEIGHT_LOW 0x380f +#define REG_OUTPUT_FORMAT 0x4300 +#define REG_ISP_CTRL_01 0x5001 +#define REG_AVG_WINDOW_END_X_HIGH 0x5682 +#define REG_AVG_WINDOW_END_X_LOW 0x5683 +#define REG_AVG_WINDOW_END_Y_HIGH 0x5686 +#define REG_AVG_WINDOW_END_Y_LOW 0x5687 + +/* active pixel array size */ +#define OV5642_SENSOR_SIZE_X 2592 +#define OV5642_SENSOR_SIZE_Y 1944 + +/* + * About OV5642 resolution, cropping and binning: + * This sensor supports it all, at least in the feature description. + * Unfortunately, no combination of appropriate registers settings could make + * the chip work the intended way. As it works with predefined register lists, + * some undocumented registers are presumably changed there to achieve their + * goals. + * This driver currently only works for resolutions up to 720 lines with a + * 1:1 scale. Hopefully these restrictions will be removed in the future. + */ +#define OV5642_MAX_WIDTH OV5642_SENSOR_SIZE_X +#define OV5642_MAX_HEIGHT 720 + +/* default sizes */ +#define OV5642_DEFAULT_WIDTH 1280 +#define OV5642_DEFAULT_HEIGHT OV5642_MAX_HEIGHT + +/* minimum extra blanking */ +#define BLANKING_EXTRA_WIDTH 500 +#define BLANKING_EXTRA_HEIGHT 20 + +/* + * the sensor's autoexposure is buggy when setting total_height low. + * It tries to expose longer than 1 frame period without taking care of it + * and this leads to weird output. So we set 1000 lines as minimum. + */ +#define BLANKING_MIN_HEIGHT 1000 + +struct regval_list { + u16 reg_num; + u8 value; +}; + +static struct regval_list ov5642_default_regs_init[] = { + { 0x3103, 0x93 }, + { 0x3008, 0x82 }, + { 0x3017, 0x7f }, + { 0x3018, 0xfc }, + { 0x3810, 0xc2 }, + { 0x3615, 0xf0 }, + { 0x3000, 0x0 }, + { 0x3001, 0x0 }, + { 0x3002, 0x0 }, + { 0x3003, 0x0 }, + { 0x3004, 0xff }, + { 0x3030, 0x2b }, + { 0x3011, 0x8 }, + { 0x3010, 0x10 }, + { 0x3604, 0x60 }, + { 0x3622, 0x60 }, + { 0x3621, 0x9 }, + { 0x3709, 0x0 }, + { 0x4000, 0x21 }, + { 0x401d, 0x22 }, + { 0x3600, 0x54 }, + { 0x3605, 0x4 }, + { 0x3606, 0x3f }, + { 0x3c01, 0x80 }, + { 0x300d, 0x22 }, + { 0x3623, 0x22 }, + { 0x5000, 0x4f }, + { 0x5020, 0x4 }, + { 0x5181, 0x79 }, + { 0x5182, 0x0 }, + { 0x5185, 0x22 }, + { 0x5197, 0x1 }, + { 0x5500, 0xa }, + { 0x5504, 0x0 }, + { 0x5505, 0x7f }, + { 0x5080, 0x8 }, + { 0x300e, 0x18 }, + { 0x4610, 0x0 }, + { 0x471d, 0x5 }, + { 0x4708, 0x6 }, + { 0x370c, 0xa0 }, + { 0x5687, 0x94 }, + { 0x501f, 0x0 }, + { 0x5000, 0x4f }, + { 0x5001, 0xcf }, + { 0x4300, 0x30 }, + { 0x4300, 0x30 }, + { 0x460b, 0x35 }, + { 0x471d, 0x0 }, + { 0x3002, 0xc }, + { 0x3002, 0x0 }, + { 0x4713, 0x3 }, + { 0x471c, 0x50 }, + { 0x4721, 0x2 }, + { 0x4402, 0x90 }, + { 0x460c, 0x22 }, + { 0x3815, 0x44 }, + { 0x3503, 0x7 }, + { 0x3501, 0x73 }, + { 0x3502, 0x80 }, + { 0x350b, 0x0 }, + { 0x3818, 0xc8 }, + { 0x3824, 0x11 }, + { 0x3a00, 0x78 }, + { 0x3a1a, 0x4 }, + { 0x3a13, 0x30 }, + { 0x3a18, 0x0 }, + { 0x3a19, 0x7c }, + { 0x3a08, 0x12 }, + { 0x3a09, 0xc0 }, + { 0x3a0a, 0xf }, + { 0x3a0b, 0xa0 }, + { 0x350c, 0x7 }, + { 0x350d, 0xd0 }, + { 0x3a0d, 0x8 }, + { 0x3a0e, 0x6 }, + { 0x3500, 0x0 }, + { 0x3501, 0x0 }, + { 0x3502, 0x0 }, + { 0x350a, 0x0 }, + { 0x350b, 0x0 }, + { 0x3503, 0x0 }, + { 0x3a0f, 0x3c }, + { 0x3a10, 0x32 }, + { 0x3a1b, 0x3c }, + { 0x3a1e, 0x32 }, + { 0x3a11, 0x80 }, + { 0x3a1f, 0x20 }, + { 0x3030, 0x2b }, + { 0x3a02, 0x0 }, + { 0x3a03, 0x7d }, + { 0x3a04, 0x0 }, + { 0x3a14, 0x0 }, + { 0x3a15, 0x7d }, + { 0x3a16, 0x0 }, + { 0x3a00, 0x78 }, + { 0x3a08, 0x9 }, + { 0x3a09, 0x60 }, + { 0x3a0a, 0x7 }, + { 0x3a0b, 0xd0 }, + { 0x3a0d, 0x10 }, + { 0x3a0e, 0xd }, + { 0x4407, 0x4 }, + { 0x5193, 0x70 }, + { 0x589b, 0x0 }, + { 0x589a, 0xc0 }, + { 0x401e, 0x20 }, + { 0x4001, 0x42 }, + { 0x401c, 0x6 }, + { 0x3825, 0xac }, + { 0x3827, 0xc }, + { 0x528a, 0x1 }, + { 0x528b, 0x4 }, + { 0x528c, 0x8 }, + { 0x528d, 0x10 }, + { 0x528e, 0x20 }, + { 0x528f, 0x28 }, + { 0x5290, 0x30 }, + { 0x5292, 0x0 }, + { 0x5293, 0x1 }, + { 0x5294, 0x0 }, + { 0x5295, 0x4 }, + { 0x5296, 0x0 }, + { 0x5297, 0x8 }, + { 0x5298, 0x0 }, + { 0x5299, 0x10 }, + { 0x529a, 0x0 }, + { 0x529b, 0x20 }, + { 0x529c, 0x0 }, + { 0x529d, 0x28 }, + { 0x529e, 0x0 }, + { 0x529f, 0x30 }, + { 0x5282, 0x0 }, + { 0x5300, 0x0 }, + { 0x5301, 0x20 }, + { 0x5302, 0x0 }, + { 0x5303, 0x7c }, + { 0x530c, 0x0 }, + { 0x530d, 0xc }, + { 0x530e, 0x20 }, + { 0x530f, 0x80 }, + { 0x5310, 0x20 }, + { 0x5311, 0x80 }, + { 0x5308, 0x20 }, + { 0x5309, 0x40 }, + { 0x5304, 0x0 }, + { 0x5305, 0x30 }, + { 0x5306, 0x0 }, + { 0x5307, 0x80 }, + { 0x5314, 0x8 }, + { 0x5315, 0x20 }, + { 0x5319, 0x30 }, + { 0x5316, 0x10 }, + { 0x5317, 0x0 }, + { 0x5318, 0x2 }, + { 0x5380, 0x1 }, + { 0x5381, 0x0 }, + { 0x5382, 0x0 }, + { 0x5383, 0x4e }, + { 0x5384, 0x0 }, + { 0x5385, 0xf }, + { 0x5386, 0x0 }, + { 0x5387, 0x0 }, + { 0x5388, 0x1 }, + { 0x5389, 0x15 }, + { 0x538a, 0x0 }, + { 0x538b, 0x31 }, + { 0x538c, 0x0 }, + { 0x538d, 0x0 }, + { 0x538e, 0x0 }, + { 0x538f, 0xf }, + { 0x5390, 0x0 }, + { 0x5391, 0xab }, + { 0x5392, 0x0 }, + { 0x5393, 0xa2 }, + { 0x5394, 0x8 }, + { 0x5480, 0x14 }, + { 0x5481, 0x21 }, + { 0x5482, 0x36 }, + { 0x5483, 0x57 }, + { 0x5484, 0x65 }, + { 0x5485, 0x71 }, + { 0x5486, 0x7d }, + { 0x5487, 0x87 }, + { 0x5488, 0x91 }, + { 0x5489, 0x9a }, + { 0x548a, 0xaa }, + { 0x548b, 0xb8 }, + { 0x548c, 0xcd }, + { 0x548d, 0xdd }, + { 0x548e, 0xea }, + { 0x548f, 0x1d }, + { 0x5490, 0x5 }, + { 0x5491, 0x0 }, + { 0x5492, 0x4 }, + { 0x5493, 0x20 }, + { 0x5494, 0x3 }, + { 0x5495, 0x60 }, + { 0x5496, 0x2 }, + { 0x5497, 0xb8 }, + { 0x5498, 0x2 }, + { 0x5499, 0x86 }, + { 0x549a, 0x2 }, + { 0x549b, 0x5b }, + { 0x549c, 0x2 }, + { 0x549d, 0x3b }, + { 0x549e, 0x2 }, + { 0x549f, 0x1c }, + { 0x54a0, 0x2 }, + { 0x54a1, 0x4 }, + { 0x54a2, 0x1 }, + { 0x54a3, 0xed }, + { 0x54a4, 0x1 }, + { 0x54a5, 0xc5 }, + { 0x54a6, 0x1 }, + { 0x54a7, 0xa5 }, + { 0x54a8, 0x1 }, + { 0x54a9, 0x6c }, + { 0x54aa, 0x1 }, + { 0x54ab, 0x41 }, + { 0x54ac, 0x1 }, + { 0x54ad, 0x20 }, + { 0x54ae, 0x0 }, + { 0x54af, 0x16 }, + { 0x54b0, 0x1 }, + { 0x54b1, 0x20 }, + { 0x54b2, 0x0 }, + { 0x54b3, 0x10 }, + { 0x54b4, 0x0 }, + { 0x54b5, 0xf0 }, + { 0x54b6, 0x0 }, + { 0x54b7, 0xdf }, + { 0x5402, 0x3f }, + { 0x5403, 0x0 }, + { 0x3406, 0x0 }, + { 0x5180, 0xff }, + { 0x5181, 0x52 }, + { 0x5182, 0x11 }, + { 0x5183, 0x14 }, + { 0x5184, 0x25 }, + { 0x5185, 0x24 }, + { 0x5186, 0x6 }, + { 0x5187, 0x8 }, + { 0x5188, 0x8 }, + { 0x5189, 0x7c }, + { 0x518a, 0x60 }, + { 0x518b, 0xb2 }, + { 0x518c, 0xb2 }, + { 0x518d, 0x44 }, + { 0x518e, 0x3d }, + { 0x518f, 0x58 }, + { 0x5190, 0x46 }, + { 0x5191, 0xf8 }, + { 0x5192, 0x4 }, + { 0x5193, 0x70 }, + { 0x5194, 0xf0 }, + { 0x5195, 0xf0 }, + { 0x5196, 0x3 }, + { 0x5197, 0x1 }, + { 0x5198, 0x4 }, + { 0x5199, 0x12 }, + { 0x519a, 0x4 }, + { 0x519b, 0x0 }, + { 0x519c, 0x6 }, + { 0x519d, 0x82 }, + { 0x519e, 0x0 }, + { 0x5025, 0x80 }, + { 0x3a0f, 0x38 }, + { 0x3a10, 0x30 }, + { 0x3a1b, 0x3a }, + { 0x3a1e, 0x2e }, + { 0x3a11, 0x60 }, + { 0x3a1f, 0x10 }, + { 0x5688, 0xa6 }, + { 0x5689, 0x6a }, + { 0x568a, 0xea }, + { 0x568b, 0xae }, + { 0x568c, 0xa6 }, + { 0x568d, 0x6a }, + { 0x568e, 0x62 }, + { 0x568f, 0x26 }, + { 0x5583, 0x40 }, + { 0x5584, 0x40 }, + { 0x5580, 0x2 }, + { 0x5000, 0xcf }, + { 0x5800, 0x27 }, + { 0x5801, 0x19 }, + { 0x5802, 0x12 }, + { 0x5803, 0xf }, + { 0x5804, 0x10 }, + { 0x5805, 0x15 }, + { 0x5806, 0x1e }, + { 0x5807, 0x2f }, + { 0x5808, 0x15 }, + { 0x5809, 0xd }, + { 0x580a, 0xa }, + { 0x580b, 0x9 }, + { 0x580c, 0xa }, + { 0x580d, 0xc }, + { 0x580e, 0x12 }, + { 0x580f, 0x19 }, + { 0x5810, 0xb }, + { 0x5811, 0x7 }, + { 0x5812, 0x4 }, + { 0x5813, 0x3 }, + { 0x5814, 0x3 }, + { 0x5815, 0x6 }, + { 0x5816, 0xa }, + { 0x5817, 0xf }, + { 0x5818, 0xa }, + { 0x5819, 0x5 }, + { 0x581a, 0x1 }, + { 0x581b, 0x0 }, + { 0x581c, 0x0 }, + { 0x581d, 0x3 }, + { 0x581e, 0x8 }, + { 0x581f, 0xc }, + { 0x5820, 0xa }, + { 0x5821, 0x5 }, + { 0x5822, 0x1 }, + { 0x5823, 0x0 }, + { 0x5824, 0x0 }, + { 0x5825, 0x3 }, + { 0x5826, 0x8 }, + { 0x5827, 0xc }, + { 0x5828, 0xe }, + { 0x5829, 0x8 }, + { 0x582a, 0x6 }, + { 0x582b, 0x4 }, + { 0x582c, 0x5 }, + { 0x582d, 0x7 }, + { 0x582e, 0xb }, + { 0x582f, 0x12 }, + { 0x5830, 0x18 }, + { 0x5831, 0x10 }, + { 0x5832, 0xc }, + { 0x5833, 0xa }, + { 0x5834, 0xb }, + { 0x5835, 0xe }, + { 0x5836, 0x15 }, + { 0x5837, 0x19 }, + { 0x5838, 0x32 }, + { 0x5839, 0x1f }, + { 0x583a, 0x18 }, + { 0x583b, 0x16 }, + { 0x583c, 0x17 }, + { 0x583d, 0x1e }, + { 0x583e, 0x26 }, + { 0x583f, 0x53 }, + { 0x5840, 0x10 }, + { 0x5841, 0xf }, + { 0x5842, 0xd }, + { 0x5843, 0xc }, + { 0x5844, 0xe }, + { 0x5845, 0x9 }, + { 0x5846, 0x11 }, + { 0x5847, 0x10 }, + { 0x5848, 0x10 }, + { 0x5849, 0x10 }, + { 0x584a, 0x10 }, + { 0x584b, 0xe }, + { 0x584c, 0x10 }, + { 0x584d, 0x10 }, + { 0x584e, 0x11 }, + { 0x584f, 0x10 }, + { 0x5850, 0xf }, + { 0x5851, 0xc }, + { 0x5852, 0xf }, + { 0x5853, 0x10 }, + { 0x5854, 0x10 }, + { 0x5855, 0xf }, + { 0x5856, 0xe }, + { 0x5857, 0xb }, + { 0x5858, 0x10 }, + { 0x5859, 0xd }, + { 0x585a, 0xd }, + { 0x585b, 0xc }, + { 0x585c, 0xc }, + { 0x585d, 0xc }, + { 0x585e, 0xb }, + { 0x585f, 0xc }, + { 0x5860, 0xc }, + { 0x5861, 0xc }, + { 0x5862, 0xd }, + { 0x5863, 0x8 }, + { 0x5864, 0x11 }, + { 0x5865, 0x18 }, + { 0x5866, 0x18 }, + { 0x5867, 0x19 }, + { 0x5868, 0x17 }, + { 0x5869, 0x19 }, + { 0x586a, 0x16 }, + { 0x586b, 0x13 }, + { 0x586c, 0x13 }, + { 0x586d, 0x12 }, + { 0x586e, 0x13 }, + { 0x586f, 0x16 }, + { 0x5870, 0x14 }, + { 0x5871, 0x12 }, + { 0x5872, 0x10 }, + { 0x5873, 0x11 }, + { 0x5874, 0x11 }, + { 0x5875, 0x16 }, + { 0x5876, 0x14 }, + { 0x5877, 0x11 }, + { 0x5878, 0x10 }, + { 0x5879, 0xf }, + { 0x587a, 0x10 }, + { 0x587b, 0x14 }, + { 0x587c, 0x13 }, + { 0x587d, 0x12 }, + { 0x587e, 0x11 }, + { 0x587f, 0x11 }, + { 0x5880, 0x12 }, + { 0x5881, 0x15 }, + { 0x5882, 0x14 }, + { 0x5883, 0x15 }, + { 0x5884, 0x15 }, + { 0x5885, 0x15 }, + { 0x5886, 0x13 }, + { 0x5887, 0x17 }, + { 0x3710, 0x10 }, + { 0x3632, 0x51 }, + { 0x3702, 0x10 }, + { 0x3703, 0xb2 }, + { 0x3704, 0x18 }, + { 0x370b, 0x40 }, + { 0x370d, 0x3 }, + { 0x3631, 0x1 }, + { 0x3632, 0x52 }, + { 0x3606, 0x24 }, + { 0x3620, 0x96 }, + { 0x5785, 0x7 }, + { 0x3a13, 0x30 }, + { 0x3600, 0x52 }, + { 0x3604, 0x48 }, + { 0x3606, 0x1b }, + { 0x370d, 0xb }, + { 0x370f, 0xc0 }, + { 0x3709, 0x1 }, + { 0x3823, 0x0 }, + { 0x5007, 0x0 }, + { 0x5009, 0x0 }, + { 0x5011, 0x0 }, + { 0x5013, 0x0 }, + { 0x519e, 0x0 }, + { 0x5086, 0x0 }, + { 0x5087, 0x0 }, + { 0x5088, 0x0 }, + { 0x5089, 0x0 }, + { 0x302b, 0x0 }, + { 0x3503, 0x7 }, + { 0x3011, 0x8 }, + { 0x350c, 0x2 }, + { 0x350d, 0xe4 }, + { 0x3621, 0xc9 }, + { 0x370a, 0x81 }, + { 0xffff, 0xff }, +}; + +static struct regval_list ov5642_default_regs_finalise[] = { + { 0x3810, 0xc2 }, + { 0x3818, 0xc9 }, + { 0x381c, 0x10 }, + { 0x381d, 0xa0 }, + { 0x381e, 0x5 }, + { 0x381f, 0xb0 }, + { 0x3820, 0x0 }, + { 0x3821, 0x0 }, + { 0x3824, 0x11 }, + { 0x3a08, 0x1b }, + { 0x3a09, 0xc0 }, + { 0x3a0a, 0x17 }, + { 0x3a0b, 0x20 }, + { 0x3a0d, 0x2 }, + { 0x3a0e, 0x1 }, + { 0x401c, 0x4 }, + { 0x5682, 0x5 }, + { 0x5683, 0x0 }, + { 0x5686, 0x2 }, + { 0x5687, 0xcc }, + { 0x5001, 0x4f }, + { 0x589b, 0x6 }, + { 0x589a, 0xc5 }, + { 0x3503, 0x0 }, + { 0x460c, 0x20 }, + { 0x460b, 0x37 }, + { 0x471c, 0xd0 }, + { 0x471d, 0x5 }, + { 0x3815, 0x1 }, + { 0x3818, 0xc1 }, + { 0x501f, 0x0 }, + { 0x5002, 0xe0 }, + { 0x4300, 0x32 }, /* UYVY */ + { 0x3002, 0x1c }, + { 0x4800, 0x14 }, + { 0x4801, 0xf }, + { 0x3007, 0x3b }, + { 0x300e, 0x4 }, + { 0x4803, 0x50 }, + { 0x3815, 0x1 }, + { 0x4713, 0x2 }, + { 0x4842, 0x1 }, + { 0x300f, 0xe }, + { 0x3003, 0x3 }, + { 0x3003, 0x1 }, + { 0xffff, 0xff }, +}; + +struct ov5642_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +struct ov5642 { + struct v4l2_subdev subdev; + const struct ov5642_datafmt *fmt; + struct v4l2_rect crop_rect; + + /* blanking information */ + int total_width; + int total_height; +}; + +static const struct ov5642_datafmt ov5642_colour_fmts[] = { + {V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG}, +}; + +static struct ov5642 *to_ov5642(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct ov5642, subdev); +} + +/* Find a data format by a pixel code in an array */ +static const struct ov5642_datafmt + *ov5642_find_datafmt(enum v4l2_mbus_pixelcode code) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ov5642_colour_fmts); i++) + if (ov5642_colour_fmts[i].code == code) + return ov5642_colour_fmts + i; + + return NULL; +} + +static int reg_read(struct i2c_client *client, u16 reg, u8 *val) +{ + int ret; + /* We have 16-bit i2c addresses - care for endianess */ + unsigned char data[2] = { reg >> 8, reg & 0xff }; + + ret = i2c_master_send(client, data, 2); + if (ret < 2) { + dev_err(&client->dev, "%s: i2c read error, reg: %x\n", + __func__, reg); + return ret < 0 ? ret : -EIO; + } + + ret = i2c_master_recv(client, val, 1); + if (ret < 1) { + dev_err(&client->dev, "%s: i2c read error, reg: %x\n", + __func__, reg); + return ret < 0 ? ret : -EIO; + } + return 0; +} + +static int reg_write(struct i2c_client *client, u16 reg, u8 val) +{ + int ret; + unsigned char data[3] = { reg >> 8, reg & 0xff, val }; + + ret = i2c_master_send(client, data, 3); + if (ret < 3) { + dev_err(&client->dev, "%s: i2c write error, reg: %x\n", + __func__, reg); + return ret < 0 ? ret : -EIO; + } + + return 0; +} + +/* + * convenience function to write 16 bit register values that are split up + * into two consecutive high and low parts + */ +static int reg_write16(struct i2c_client *client, u16 reg, u16 val16) +{ + int ret; + + ret = reg_write(client, reg, val16 >> 8); + if (ret) + return ret; + return reg_write(client, reg + 1, val16 & 0x00ff); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov5642_get_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + u8 val; + + if (reg->reg & ~0xffff) + return -EINVAL; + + reg->size = 1; + + ret = reg_read(client, reg->reg, &val); + if (!ret) + reg->val = (__u64)val; + + return ret; +} + +static int ov5642_set_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg & ~0xffff || reg->val & ~0xff) + return -EINVAL; + + return reg_write(client, reg->reg, reg->val); +} +#endif + +static int ov5642_write_array(struct i2c_client *client, + struct regval_list *vals) +{ + while (vals->reg_num != 0xffff || vals->value != 0xff) { + int ret = reg_write(client, vals->reg_num, vals->value); + if (ret < 0) + return ret; + vals++; + } + dev_dbg(&client->dev, "Register list loaded\n"); + return 0; +} + +static int ov5642_set_resolution(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5642 *priv = to_ov5642(client); + int width = priv->crop_rect.width; + int height = priv->crop_rect.height; + int total_width = priv->total_width; + int total_height = priv->total_height; + int start_x = (OV5642_SENSOR_SIZE_X - width) / 2; + int start_y = (OV5642_SENSOR_SIZE_Y - height) / 2; + int ret; + + /* + * This should set the starting point for cropping. + * Doesn't work so far. + */ + ret = reg_write16(client, REG_WINDOW_START_X_HIGH, start_x); + if (!ret) + ret = reg_write16(client, REG_WINDOW_START_Y_HIGH, start_y); + if (!ret) { + priv->crop_rect.left = start_x; + priv->crop_rect.top = start_y; + } + + if (!ret) + ret = reg_write16(client, REG_WINDOW_WIDTH_HIGH, width); + if (!ret) + ret = reg_write16(client, REG_WINDOW_HEIGHT_HIGH, height); + if (ret) + return ret; + priv->crop_rect.width = width; + priv->crop_rect.height = height; + + /* Set the output window size. Only 1:1 scale is supported so far. */ + ret = reg_write16(client, REG_OUT_WIDTH_HIGH, width); + if (!ret) + ret = reg_write16(client, REG_OUT_HEIGHT_HIGH, height); + + /* Total width = output size + blanking */ + if (!ret) + ret = reg_write16(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width); + if (!ret) + ret = reg_write16(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height); + + /* Sets the window for AWB calculations */ + if (!ret) + ret = reg_write16(client, REG_AVG_WINDOW_END_X_HIGH, width); + if (!ret) + ret = reg_write16(client, REG_AVG_WINDOW_END_Y_HIGH, height); + + return ret; +} + +static int ov5642_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5642 *priv = to_ov5642(client); + const struct ov5642_datafmt *fmt = ov5642_find_datafmt(mf->code); + + mf->width = priv->crop_rect.width; + mf->height = priv->crop_rect.height; + + if (!fmt) { + mf->code = ov5642_colour_fmts[0].code; + mf->colorspace = ov5642_colour_fmts[0].colorspace; + } + + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int ov5642_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5642 *priv = to_ov5642(client); + + /* MIPI CSI could have changed the format, double-check */ + if (!ov5642_find_datafmt(mf->code)) + return -EINVAL; + + ov5642_try_fmt(sd, mf); + priv->fmt = ov5642_find_datafmt(mf->code); + + return 0; +} + +static int ov5642_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5642 *priv = to_ov5642(client); + + const struct ov5642_datafmt *fmt = priv->fmt; + + mf->code = fmt->code; + mf->colorspace = fmt->colorspace; + mf->width = priv->crop_rect.width; + mf->height = priv->crop_rect.height; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int ov5642_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(ov5642_colour_fmts)) + return -EINVAL; + + *code = ov5642_colour_fmts[index].code; + return 0; +} + +static int ov5642_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = V4L2_IDENT_OV5642; + id->revision = 0; + + return 0; +} + +static int ov5642_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5642 *priv = to_ov5642(client); + struct v4l2_rect rect = a->c; + int ret; + + v4l_bound_align_image(&rect.width, 48, OV5642_MAX_WIDTH, 1, + &rect.height, 32, OV5642_MAX_HEIGHT, 1, 0); + + priv->crop_rect.width = rect.width; + priv->crop_rect.height = rect.height; + priv->total_width = rect.width + BLANKING_EXTRA_WIDTH; + priv->total_height = max_t(int, rect.height + + BLANKING_EXTRA_HEIGHT, + BLANKING_MIN_HEIGHT); + priv->crop_rect.width = rect.width; + priv->crop_rect.height = rect.height; + + ret = ov5642_write_array(client, ov5642_default_regs_init); + if (!ret) + ret = ov5642_set_resolution(sd); + if (!ret) + ret = ov5642_write_array(client, ov5642_default_regs_finalise); + + return ret; +} + +static int ov5642_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5642 *priv = to_ov5642(client); + struct v4l2_rect *rect = &a->c; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + *rect = priv->crop_rect; + + return 0; +} + +static int ov5642_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = OV5642_MAX_WIDTH; + a->bounds.height = OV5642_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ov5642_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + cfg->type = V4L2_MBUS_CSI2; + cfg->flags = V4L2_MBUS_CSI2_2_LANE | V4L2_MBUS_CSI2_CHANNEL_0 | + V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; + + return 0; +} + +static int ov5642_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + int ret; + + if (!on) + return soc_camera_power_off(&client->dev, ssdd); + + ret = soc_camera_power_on(&client->dev, ssdd); + if (ret < 0) + return ret; + + ret = ov5642_write_array(client, ov5642_default_regs_init); + if (!ret) + ret = ov5642_set_resolution(sd); + if (!ret) + ret = ov5642_write_array(client, ov5642_default_regs_finalise); + + return ret; +} + +static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = { + .s_mbus_fmt = ov5642_s_fmt, + .g_mbus_fmt = ov5642_g_fmt, + .try_mbus_fmt = ov5642_try_fmt, + .enum_mbus_fmt = ov5642_enum_fmt, + .s_crop = ov5642_s_crop, + .g_crop = ov5642_g_crop, + .cropcap = ov5642_cropcap, + .g_mbus_config = ov5642_g_mbus_config, +}; + +static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = { + .s_power = ov5642_s_power, + .g_chip_ident = ov5642_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov5642_get_register, + .s_register = ov5642_set_register, +#endif +}; + +static struct v4l2_subdev_ops ov5642_subdev_ops = { + .core = &ov5642_subdev_core_ops, + .video = &ov5642_subdev_video_ops, +}; + +static int ov5642_video_probe(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + int ret; + u8 id_high, id_low; + u16 id; + + ret = ov5642_s_power(subdev, 1); + if (ret < 0) + return ret; + + /* Read sensor Model ID */ + ret = reg_read(client, REG_CHIP_ID_HIGH, &id_high); + if (ret < 0) + goto done; + + id = id_high << 8; + + ret = reg_read(client, REG_CHIP_ID_LOW, &id_low); + if (ret < 0) + goto done; + + id |= id_low; + + dev_info(&client->dev, "Chip ID 0x%04x detected\n", id); + + if (id != 0x5642) { + ret = -ENODEV; + goto done; + } + + ret = 0; + +done: + ov5642_s_power(subdev, 0); + return ret; +} + +static int ov5642_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov5642 *priv; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + if (!ssdd) { + dev_err(&client->dev, "OV5642: missing platform data!\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&client->dev, sizeof(struct ov5642), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + v4l2_i2c_subdev_init(&priv->subdev, client, &ov5642_subdev_ops); + + priv->fmt = &ov5642_colour_fmts[0]; + + priv->crop_rect.width = OV5642_DEFAULT_WIDTH; + priv->crop_rect.height = OV5642_DEFAULT_HEIGHT; + priv->crop_rect.left = (OV5642_MAX_WIDTH - OV5642_DEFAULT_WIDTH) / 2; + priv->crop_rect.top = (OV5642_MAX_HEIGHT - OV5642_DEFAULT_HEIGHT) / 2; + priv->total_width = OV5642_DEFAULT_WIDTH + BLANKING_EXTRA_WIDTH; + priv->total_height = BLANKING_MIN_HEIGHT; + + return ov5642_video_probe(client); +} + +static int ov5642_remove(struct i2c_client *client) +{ + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + if (ssdd->free_bus) + ssdd->free_bus(ssdd); + + return 0; +} + +static const struct i2c_device_id ov5642_id[] = { + { "ov5642", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov5642_id); + +static struct i2c_driver ov5642_i2c_driver = { + .driver = { + .name = "ov5642", + }, + .probe = ov5642_probe, + .remove = ov5642_remove, + .id_table = ov5642_id, +}; + +module_i2c_driver(ov5642_i2c_driver); + +MODULE_DESCRIPTION("Omnivision OV5642 Camera driver"); +MODULE_AUTHOR("Bastian Hecht "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/ov6650.c b/drivers/media/i2c/soc_camera/ov6650.c new file mode 100644 index 00000000..991202d4 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov6650.c @@ -0,0 +1,1063 @@ +/* + * V4L2 SoC Camera driver for OmniVision OV6650 Camera Sensor + * + * Copyright (C) 2010 Janusz Krzysztofik + * + * Based on OmniVision OV96xx Camera Driver + * Copyright (C) 2009 Marek Vasut + * + * Based on ov772x camera driver: + * Copyright (C) 2008 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on ov7670 and soc_camera_platform driver, + * Copyright 2006-7 Jonathan Corbet + * Copyright (C) 2008 Magnus Damm + * Copyright (C) 2008, Guennadi Liakhovetski + * + * Hardware specific bits initialy based on former work by Matt Callow + * drivers/media/video/omap/sensor_ov6650.c + * Copyright (C) 2006 Matt Callow + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* Register definitions */ +#define REG_GAIN 0x00 /* range 00 - 3F */ +#define REG_BLUE 0x01 +#define REG_RED 0x02 +#define REG_SAT 0x03 /* [7:4] saturation [0:3] reserved */ +#define REG_HUE 0x04 /* [7:6] rsrvd [5] hue en [4:0] hue */ + +#define REG_BRT 0x06 + +#define REG_PIDH 0x0a +#define REG_PIDL 0x0b + +#define REG_AECH 0x10 +#define REG_CLKRC 0x11 /* Data Format and Internal Clock */ + /* [7:6] Input system clock (MHz)*/ + /* 00=8, 01=12, 10=16, 11=24 */ + /* [5:0]: Internal Clock Pre-Scaler */ +#define REG_COMA 0x12 /* [7] Reset */ +#define REG_COMB 0x13 +#define REG_COMC 0x14 +#define REG_COMD 0x15 +#define REG_COML 0x16 +#define REG_HSTRT 0x17 +#define REG_HSTOP 0x18 +#define REG_VSTRT 0x19 +#define REG_VSTOP 0x1a +#define REG_PSHFT 0x1b +#define REG_MIDH 0x1c +#define REG_MIDL 0x1d +#define REG_HSYNS 0x1e +#define REG_HSYNE 0x1f +#define REG_COME 0x20 +#define REG_YOFF 0x21 +#define REG_UOFF 0x22 +#define REG_VOFF 0x23 +#define REG_AEW 0x24 +#define REG_AEB 0x25 +#define REG_COMF 0x26 +#define REG_COMG 0x27 +#define REG_COMH 0x28 +#define REG_COMI 0x29 + +#define REG_FRARL 0x2b +#define REG_COMJ 0x2c +#define REG_COMK 0x2d +#define REG_AVGY 0x2e +#define REG_REF0 0x2f +#define REG_REF1 0x30 +#define REG_REF2 0x31 +#define REG_FRAJH 0x32 +#define REG_FRAJL 0x33 +#define REG_FACT 0x34 +#define REG_L1AEC 0x35 +#define REG_AVGU 0x36 +#define REG_AVGV 0x37 + +#define REG_SPCB 0x60 +#define REG_SPCC 0x61 +#define REG_GAM1 0x62 +#define REG_GAM2 0x63 +#define REG_GAM3 0x64 +#define REG_SPCD 0x65 + +#define REG_SPCE 0x68 +#define REG_ADCL 0x69 + +#define REG_RMCO 0x6c +#define REG_GMCO 0x6d +#define REG_BMCO 0x6e + + +/* Register bits, values, etc. */ +#define OV6650_PIDH 0x66 /* high byte of product ID number */ +#define OV6650_PIDL 0x50 /* low byte of product ID number */ +#define OV6650_MIDH 0x7F /* high byte of mfg ID */ +#define OV6650_MIDL 0xA2 /* low byte of mfg ID */ + +#define DEF_GAIN 0x00 +#define DEF_BLUE 0x80 +#define DEF_RED 0x80 + +#define SAT_SHIFT 4 +#define SAT_MASK (0xf << SAT_SHIFT) +#define SET_SAT(x) (((x) << SAT_SHIFT) & SAT_MASK) + +#define HUE_EN BIT(5) +#define HUE_MASK 0x1f +#define DEF_HUE 0x10 +#define SET_HUE(x) (HUE_EN | ((x) & HUE_MASK)) + +#define DEF_AECH 0x4D + +#define CLKRC_6MHz 0x00 +#define CLKRC_12MHz 0x40 +#define CLKRC_16MHz 0x80 +#define CLKRC_24MHz 0xc0 +#define CLKRC_DIV_MASK 0x3f +#define GET_CLKRC_DIV(x) (((x) & CLKRC_DIV_MASK) + 1) + +#define COMA_RESET BIT(7) +#define COMA_QCIF BIT(5) +#define COMA_RAW_RGB BIT(4) +#define COMA_RGB BIT(3) +#define COMA_BW BIT(2) +#define COMA_WORD_SWAP BIT(1) +#define COMA_BYTE_SWAP BIT(0) +#define DEF_COMA 0x00 + +#define COMB_FLIP_V BIT(7) +#define COMB_FLIP_H BIT(5) +#define COMB_BAND_FILTER BIT(4) +#define COMB_AWB BIT(2) +#define COMB_AGC BIT(1) +#define COMB_AEC BIT(0) +#define DEF_COMB 0x5f + +#define COML_ONE_CHANNEL BIT(7) + +#define DEF_HSTRT 0x24 +#define DEF_HSTOP 0xd4 +#define DEF_VSTRT 0x04 +#define DEF_VSTOP 0x94 + +#define COMF_HREF_LOW BIT(4) + +#define COMJ_PCLK_RISING BIT(4) +#define COMJ_VSYNC_HIGH BIT(0) + +/* supported resolutions */ +#define W_QCIF (DEF_HSTOP - DEF_HSTRT) +#define W_CIF (W_QCIF << 1) +#define H_QCIF (DEF_VSTOP - DEF_VSTRT) +#define H_CIF (H_QCIF << 1) + +#define FRAME_RATE_MAX 30 + + +struct ov6650_reg { + u8 reg; + u8 val; +}; + +struct ov6650 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct { + /* exposure/autoexposure cluster */ + struct v4l2_ctrl *autoexposure; + struct v4l2_ctrl *exposure; + }; + struct { + /* gain/autogain cluster */ + struct v4l2_ctrl *autogain; + struct v4l2_ctrl *gain; + }; + struct { + /* blue/red/autowhitebalance cluster */ + struct v4l2_ctrl *autowb; + struct v4l2_ctrl *blue; + struct v4l2_ctrl *red; + }; + bool half_scale; /* scale down output by 2 */ + struct v4l2_rect rect; /* sensor cropping window */ + unsigned long pclk_limit; /* from host */ + unsigned long pclk_max; /* from resolution and format */ + struct v4l2_fract tpf; /* as requested with s_parm */ + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + + +static enum v4l2_mbus_pixelcode ov6650_codes[] = { + V4L2_MBUS_FMT_YUYV8_2X8, + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_YVYU8_2X8, + V4L2_MBUS_FMT_VYUY8_2X8, + V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_MBUS_FMT_Y8_1X8, +}; + +/* read a register */ +static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val) +{ + int ret; + u8 data = reg; + struct i2c_msg msg = { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &data, + }; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) + goto err; + + msg.flags = I2C_M_RD; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) + goto err; + + *val = data; + return 0; + +err: + dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg); + return ret; +} + +/* write a register */ +static int ov6650_reg_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret; + unsigned char data[2] = { reg, val }; + struct i2c_msg msg = { + .addr = client->addr, + .flags = 0, + .len = 2, + .buf = data, + }; + + ret = i2c_transfer(client->adapter, &msg, 1); + udelay(100); + + if (ret < 0) { + dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg); + return ret; + } + return 0; +} + + +/* Read a register, alter its bits, write it back */ +static int ov6650_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 mask) +{ + u8 val; + int ret; + + ret = ov6650_reg_read(client, reg, &val); + if (ret) { + dev_err(&client->dev, + "[Read]-Modify-Write of register 0x%02x failed!\n", + reg); + return ret; + } + + val &= ~mask; + val |= set; + + ret = ov6650_reg_write(client, reg, val); + if (ret) + dev_err(&client->dev, + "Read-Modify-[Write] of register 0x%02x failed!\n", + reg); + + return ret; +} + +static struct ov6650 *to_ov6650(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct ov6650, subdev); +} + +/* Start/Stop streaming from the device */ +static int ov6650_s_stream(struct v4l2_subdev *sd, int enable) +{ + return 0; +} + +/* Get status of additional camera capabilities */ +static int ov6550_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl); + struct v4l2_subdev *sd = &priv->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + uint8_t reg, reg2; + int ret; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + ret = ov6650_reg_read(client, REG_GAIN, ®); + if (!ret) + priv->gain->val = reg; + return ret; + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = ov6650_reg_read(client, REG_BLUE, ®); + if (!ret) + ret = ov6650_reg_read(client, REG_RED, ®2); + if (!ret) { + priv->blue->val = reg; + priv->red->val = reg2; + } + return ret; + case V4L2_CID_EXPOSURE_AUTO: + ret = ov6650_reg_read(client, REG_AECH, ®); + if (!ret) + priv->exposure->val = reg; + return ret; + } + return -EINVAL; +} + +/* Set status of additional camera capabilities */ +static int ov6550_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl); + struct v4l2_subdev *sd = &priv->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + ret = ov6650_reg_rmw(client, REG_COMB, + ctrl->val ? COMB_AGC : 0, COMB_AGC); + if (!ret && !ctrl->val) + ret = ov6650_reg_write(client, REG_GAIN, priv->gain->val); + return ret; + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = ov6650_reg_rmw(client, REG_COMB, + ctrl->val ? COMB_AWB : 0, COMB_AWB); + if (!ret && !ctrl->val) { + ret = ov6650_reg_write(client, REG_BLUE, priv->blue->val); + if (!ret) + ret = ov6650_reg_write(client, REG_RED, + priv->red->val); + } + return ret; + case V4L2_CID_SATURATION: + return ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->val), + SAT_MASK); + case V4L2_CID_HUE: + return ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->val), + HUE_MASK); + case V4L2_CID_BRIGHTNESS: + return ov6650_reg_write(client, REG_BRT, ctrl->val); + case V4L2_CID_EXPOSURE_AUTO: + ret = ov6650_reg_rmw(client, REG_COMB, ctrl->val == + V4L2_EXPOSURE_AUTO ? COMB_AEC : 0, COMB_AEC); + if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL) + ret = ov6650_reg_write(client, REG_AECH, + priv->exposure->val); + return ret; + case V4L2_CID_GAMMA: + return ov6650_reg_write(client, REG_GAM1, ctrl->val); + case V4L2_CID_VFLIP: + return ov6650_reg_rmw(client, REG_COMB, + ctrl->val ? COMB_FLIP_V : 0, COMB_FLIP_V); + case V4L2_CID_HFLIP: + return ov6650_reg_rmw(client, REG_COMB, + ctrl->val ? COMB_FLIP_H : 0, COMB_FLIP_H); + } + + return -EINVAL; +} + +/* Get chip identification */ +static int ov6650_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + id->ident = V4L2_IDENT_OV6650; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov6650_get_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + u8 val; + + if (reg->reg & ~0xff) + return -EINVAL; + + reg->size = 1; + + ret = ov6650_reg_read(client, reg->reg, &val); + if (!ret) + reg->val = (__u64)val; + + return ret; +} + +static int ov6650_set_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg & ~0xff || reg->val & ~0xff) + return -EINVAL; + + return ov6650_reg_write(client, reg->reg, reg->val); +} +#endif + +static int ov6650_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +static int ov6650_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov6650 *priv = to_ov6650(client); + + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->c = priv->rect; + + return 0; +} + +static int ov6650_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov6650 *priv = to_ov6650(client); + struct v4l2_rect rect = a->c; + int ret; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + rect.left = ALIGN(rect.left, 2); + rect.width = ALIGN(rect.width, 2); + rect.top = ALIGN(rect.top, 2); + rect.height = ALIGN(rect.height, 2); + soc_camera_limit_side(&rect.left, &rect.width, + DEF_HSTRT << 1, 2, W_CIF); + soc_camera_limit_side(&rect.top, &rect.height, + DEF_VSTRT << 1, 2, H_CIF); + + ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1); + if (!ret) { + priv->rect.left = rect.left; + ret = ov6650_reg_write(client, REG_HSTOP, + (rect.left + rect.width) >> 1); + } + if (!ret) { + priv->rect.width = rect.width; + ret = ov6650_reg_write(client, REG_VSTRT, rect.top >> 1); + } + if (!ret) { + priv->rect.top = rect.top; + ret = ov6650_reg_write(client, REG_VSTOP, + (rect.top + rect.height) >> 1); + } + if (!ret) + priv->rect.height = rect.height; + + return ret; +} + +static int ov6650_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + a->bounds.left = DEF_HSTRT << 1; + a->bounds.top = DEF_VSTRT << 1; + a->bounds.width = W_CIF; + a->bounds.height = H_CIF; + a->defrect = a->bounds; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ov6650_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov6650 *priv = to_ov6650(client); + + mf->width = priv->rect.width >> priv->half_scale; + mf->height = priv->rect.height >> priv->half_scale; + mf->code = priv->code; + mf->colorspace = priv->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect) +{ + return width > rect->width >> 1 || height > rect->height >> 1; +} + +static u8 to_clkrc(struct v4l2_fract *timeperframe, + unsigned long pclk_limit, unsigned long pclk_max) +{ + unsigned long pclk; + + if (timeperframe->numerator && timeperframe->denominator) + pclk = pclk_max * timeperframe->denominator / + (FRAME_RATE_MAX * timeperframe->numerator); + else + pclk = pclk_max; + + if (pclk_limit && pclk_limit < pclk) + pclk = pclk_limit; + + return (pclk_max - 1) / pclk; +} + +/* set the format we will capture in */ +static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd); + struct soc_camera_sense *sense = icd->sense; + struct ov6650 *priv = to_ov6650(client); + bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect); + struct v4l2_crop a = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .c = { + .left = priv->rect.left + (priv->rect.width >> 1) - + (mf->width >> (1 - half_scale)), + .top = priv->rect.top + (priv->rect.height >> 1) - + (mf->height >> (1 - half_scale)), + .width = mf->width << half_scale, + .height = mf->height << half_scale, + }, + }; + enum v4l2_mbus_pixelcode code = mf->code; + unsigned long mclk, pclk; + u8 coma_set = 0, coma_mask = 0, coml_set, coml_mask, clkrc; + int ret; + + /* select color matrix configuration for given color encoding */ + switch (code) { + case V4L2_MBUS_FMT_Y8_1X8: + dev_dbg(&client->dev, "pixel format GREY8_1X8\n"); + coma_mask |= COMA_RGB | COMA_WORD_SWAP | COMA_BYTE_SWAP; + coma_set |= COMA_BW; + break; + case V4L2_MBUS_FMT_YUYV8_2X8: + dev_dbg(&client->dev, "pixel format YUYV8_2X8_LE\n"); + coma_mask |= COMA_RGB | COMA_BW | COMA_BYTE_SWAP; + coma_set |= COMA_WORD_SWAP; + break; + case V4L2_MBUS_FMT_YVYU8_2X8: + dev_dbg(&client->dev, "pixel format YVYU8_2X8_LE (untested)\n"); + coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP | + COMA_BYTE_SWAP; + break; + case V4L2_MBUS_FMT_UYVY8_2X8: + dev_dbg(&client->dev, "pixel format YUYV8_2X8_BE\n"); + if (half_scale) { + coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP; + coma_set |= COMA_BYTE_SWAP; + } else { + coma_mask |= COMA_RGB | COMA_BW; + coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP; + } + break; + case V4L2_MBUS_FMT_VYUY8_2X8: + dev_dbg(&client->dev, "pixel format YVYU8_2X8_BE (untested)\n"); + if (half_scale) { + coma_mask |= COMA_RGB | COMA_BW; + coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP; + } else { + coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP; + coma_set |= COMA_BYTE_SWAP; + } + break; + case V4L2_MBUS_FMT_SBGGR8_1X8: + dev_dbg(&client->dev, "pixel format SBGGR8_1X8 (untested)\n"); + coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP; + coma_set |= COMA_RAW_RGB | COMA_RGB; + break; + default: + dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code); + return -EINVAL; + } + priv->code = code; + + if (code == V4L2_MBUS_FMT_Y8_1X8 || + code == V4L2_MBUS_FMT_SBGGR8_1X8) { + coml_mask = COML_ONE_CHANNEL; + coml_set = 0; + priv->pclk_max = 4000000; + } else { + coml_mask = 0; + coml_set = COML_ONE_CHANNEL; + priv->pclk_max = 8000000; + } + + if (code == V4L2_MBUS_FMT_SBGGR8_1X8) + priv->colorspace = V4L2_COLORSPACE_SRGB; + else if (code != 0) + priv->colorspace = V4L2_COLORSPACE_JPEG; + + if (half_scale) { + dev_dbg(&client->dev, "max resolution: QCIF\n"); + coma_set |= COMA_QCIF; + priv->pclk_max /= 2; + } else { + dev_dbg(&client->dev, "max resolution: CIF\n"); + coma_mask |= COMA_QCIF; + } + priv->half_scale = half_scale; + + if (sense) { + if (sense->master_clock == 8000000) { + dev_dbg(&client->dev, "8MHz input clock\n"); + clkrc = CLKRC_6MHz; + } else if (sense->master_clock == 12000000) { + dev_dbg(&client->dev, "12MHz input clock\n"); + clkrc = CLKRC_12MHz; + } else if (sense->master_clock == 16000000) { + dev_dbg(&client->dev, "16MHz input clock\n"); + clkrc = CLKRC_16MHz; + } else if (sense->master_clock == 24000000) { + dev_dbg(&client->dev, "24MHz input clock\n"); + clkrc = CLKRC_24MHz; + } else { + dev_err(&client->dev, + "unsupported input clock, check platform data\n"); + return -EINVAL; + } + mclk = sense->master_clock; + priv->pclk_limit = sense->pixel_clock_max; + } else { + clkrc = CLKRC_24MHz; + mclk = 24000000; + priv->pclk_limit = 0; + dev_dbg(&client->dev, "using default 24MHz input clock\n"); + } + + clkrc |= to_clkrc(&priv->tpf, priv->pclk_limit, priv->pclk_max); + + pclk = priv->pclk_max / GET_CLKRC_DIV(clkrc); + dev_dbg(&client->dev, "pixel clock divider: %ld.%ld\n", + mclk / pclk, 10 * mclk % pclk / pclk); + + ret = ov6650_s_crop(sd, &a); + if (!ret) + ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask); + if (!ret) + ret = ov6650_reg_write(client, REG_CLKRC, clkrc); + if (!ret) + ret = ov6650_reg_rmw(client, REG_COML, coml_set, coml_mask); + + if (!ret) { + mf->colorspace = priv->colorspace; + mf->width = priv->rect.width >> half_scale; + mf->height = priv->rect.height >> half_scale; + } + + return ret; +} + +static int ov6650_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov6650 *priv = to_ov6650(client); + + if (is_unscaled_ok(mf->width, mf->height, &priv->rect)) + v4l_bound_align_image(&mf->width, 2, W_CIF, 1, + &mf->height, 2, H_CIF, 1, 0); + + mf->field = V4L2_FIELD_NONE; + + switch (mf->code) { + case V4L2_MBUS_FMT_Y10_1X10: + mf->code = V4L2_MBUS_FMT_Y8_1X8; + case V4L2_MBUS_FMT_Y8_1X8: + case V4L2_MBUS_FMT_YVYU8_2X8: + case V4L2_MBUS_FMT_YUYV8_2X8: + case V4L2_MBUS_FMT_VYUY8_2X8: + case V4L2_MBUS_FMT_UYVY8_2X8: + mf->colorspace = V4L2_COLORSPACE_JPEG; + break; + default: + mf->code = V4L2_MBUS_FMT_SBGGR8_1X8; + case V4L2_MBUS_FMT_SBGGR8_1X8: + mf->colorspace = V4L2_COLORSPACE_SRGB; + break; + } + + return 0; +} + +static int ov6650_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(ov6650_codes)) + return -EINVAL; + + *code = ov6650_codes[index]; + return 0; +} + +static int ov6650_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov6650 *priv = to_ov6650(client); + struct v4l2_captureparm *cp = &parms->parm.capture; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(*cp)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + cp->timeperframe.numerator = GET_CLKRC_DIV(to_clkrc(&priv->tpf, + priv->pclk_limit, priv->pclk_max)); + cp->timeperframe.denominator = FRAME_RATE_MAX; + + dev_dbg(&client->dev, "Frame interval: %u/%u s\n", + cp->timeperframe.numerator, cp->timeperframe.denominator); + + return 0; +} + +static int ov6650_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov6650 *priv = to_ov6650(client); + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + int div, ret; + u8 clkrc; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (cp->extendedmode != 0) + return -EINVAL; + + if (tpf->numerator == 0 || tpf->denominator == 0) + div = 1; /* Reset to full rate */ + else + div = (tpf->numerator * FRAME_RATE_MAX) / tpf->denominator; + + if (div == 0) + div = 1; + else if (div > GET_CLKRC_DIV(CLKRC_DIV_MASK)) + div = GET_CLKRC_DIV(CLKRC_DIV_MASK); + + /* + * Keep result to be used as tpf limit + * for subseqent clock divider calculations + */ + priv->tpf.numerator = div; + priv->tpf.denominator = FRAME_RATE_MAX; + + clkrc = to_clkrc(&priv->tpf, priv->pclk_limit, priv->pclk_max); + + ret = ov6650_reg_rmw(client, REG_CLKRC, clkrc, CLKRC_DIV_MASK); + if (!ret) { + tpf->numerator = GET_CLKRC_DIV(clkrc); + tpf->denominator = FRAME_RATE_MAX; + } + + return ret; +} + +/* Soft reset the camera. This has nothing to do with the RESET pin! */ +static int ov6650_reset(struct i2c_client *client) +{ + int ret; + + dev_dbg(&client->dev, "reset\n"); + + ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0); + if (ret) + dev_err(&client->dev, + "An error occurred while entering soft reset!\n"); + + return ret; +} + +/* program default register values */ +static int ov6650_prog_dflt(struct i2c_client *client) +{ + int ret; + + dev_dbg(&client->dev, "initializing\n"); + + ret = ov6650_reg_write(client, REG_COMA, 0); /* ~COMA_RESET */ + if (!ret) + ret = ov6650_reg_rmw(client, REG_COMB, 0, COMB_BAND_FILTER); + + return ret; +} + +static int ov6650_video_probe(struct i2c_client *client) +{ + struct ov6650 *priv = to_ov6650(client); + u8 pidh, pidl, midh, midl; + int ret; + + ret = ov6650_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + + /* + * check and show product ID and manufacturer ID + */ + ret = ov6650_reg_read(client, REG_PIDH, &pidh); + if (!ret) + ret = ov6650_reg_read(client, REG_PIDL, &pidl); + if (!ret) + ret = ov6650_reg_read(client, REG_MIDH, &midh); + if (!ret) + ret = ov6650_reg_read(client, REG_MIDL, &midl); + + if (ret) + goto done; + + if ((pidh != OV6650_PIDH) || (pidl != OV6650_PIDL)) { + dev_err(&client->dev, "Product ID error 0x%02x:0x%02x\n", + pidh, pidl); + ret = -ENODEV; + goto done; + } + + dev_info(&client->dev, + "ov6650 Product ID 0x%02x:0x%02x Manufacturer ID 0x%02x:0x%02x\n", + pidh, pidl, midh, midl); + + ret = ov6650_reset(client); + if (!ret) + ret = ov6650_prog_dflt(client); + if (!ret) + ret = v4l2_ctrl_handler_setup(&priv->hdl); + +done: + ov6650_s_power(&priv->subdev, 0); + return ret; +} + +static const struct v4l2_ctrl_ops ov6550_ctrl_ops = { + .g_volatile_ctrl = ov6550_g_volatile_ctrl, + .s_ctrl = ov6550_s_ctrl, +}; + +static struct v4l2_subdev_core_ops ov6650_core_ops = { + .g_chip_ident = ov6650_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov6650_get_register, + .s_register = ov6650_set_register, +#endif + .s_power = ov6650_s_power, +}; + +/* Request bus settings on camera side */ +static int ov6650_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_MASTER | + V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +/* Alter bus settings on camera side */ +static int ov6650_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg); + int ret; + + if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0); + else + ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING); + if (ret) + return ret; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0); + else + ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW); + if (ret) + return ret; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) + ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0); + else + ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH); + + return ret; +} + +static struct v4l2_subdev_video_ops ov6650_video_ops = { + .s_stream = ov6650_s_stream, + .g_mbus_fmt = ov6650_g_fmt, + .s_mbus_fmt = ov6650_s_fmt, + .try_mbus_fmt = ov6650_try_fmt, + .enum_mbus_fmt = ov6650_enum_fmt, + .cropcap = ov6650_cropcap, + .g_crop = ov6650_g_crop, + .s_crop = ov6650_s_crop, + .g_parm = ov6650_g_parm, + .s_parm = ov6650_s_parm, + .g_mbus_config = ov6650_g_mbus_config, + .s_mbus_config = ov6650_s_mbus_config, +}; + +static struct v4l2_subdev_ops ov6650_subdev_ops = { + .core = &ov6650_core_ops, + .video = &ov6650_video_ops, +}; + +/* + * i2c_driver function + */ +static int ov6650_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov6650 *priv; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + int ret; + + if (!ssdd) { + dev_err(&client->dev, "Missing platform_data for driver\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&client->dev, + "Failed to allocate memory for private data!\n"); + return -ENOMEM; + } + + v4l2_i2c_subdev_init(&priv->subdev, client, &ov6650_subdev_ops); + v4l2_ctrl_handler_init(&priv->hdl, 13); + v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + priv->autogain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + priv->gain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_GAIN, 0, 0x3f, 1, DEF_GAIN); + priv->autowb = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); + priv->blue = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_BLUE_BALANCE, 0, 0xff, 1, DEF_BLUE); + priv->red = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_RED_BALANCE, 0, 0xff, 1, DEF_RED); + v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xf, 1, 0x8); + v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_HUE, 0, HUE_MASK, 1, DEF_HUE); + v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 0xff, 1, 0x80); + priv->autoexposure = v4l2_ctrl_new_std_menu(&priv->hdl, + &ov6550_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, + V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); + priv->exposure = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_EXPOSURE, 0, 0xff, 1, DEF_AECH); + v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, + V4L2_CID_GAMMA, 0, 0xff, 1, 0x12); + + priv->subdev.ctrl_handler = &priv->hdl; + if (priv->hdl.error) + return priv->hdl.error; + + v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true); + v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true); + v4l2_ctrl_auto_cluster(2, &priv->autoexposure, + V4L2_EXPOSURE_MANUAL, true); + + priv->rect.left = DEF_HSTRT << 1; + priv->rect.top = DEF_VSTRT << 1; + priv->rect.width = W_CIF; + priv->rect.height = H_CIF; + priv->half_scale = false; + priv->code = V4L2_MBUS_FMT_YUYV8_2X8; + priv->colorspace = V4L2_COLORSPACE_JPEG; + + ret = ov6650_video_probe(client); + if (ret) + v4l2_ctrl_handler_free(&priv->hdl); + + return ret; +} + +static int ov6650_remove(struct i2c_client *client) +{ + struct ov6650 *priv = to_ov6650(client); + + v4l2_device_unregister_subdev(&priv->subdev); + v4l2_ctrl_handler_free(&priv->hdl); + return 0; +} + +static const struct i2c_device_id ov6650_id[] = { + { "ov6650", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov6650_id); + +static struct i2c_driver ov6650_i2c_driver = { + .driver = { + .name = "ov6650", + }, + .probe = ov6650_probe, + .remove = ov6650_remove, + .id_table = ov6650_id, +}; + +module_i2c_driver(ov6650_i2c_driver); + +MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV6650"); +MODULE_AUTHOR("Janusz Krzysztofik "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/ov772x.c b/drivers/media/i2c/soc_camera/ov772x.c new file mode 100644 index 00000000..713d62e3 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov772x.c @@ -0,0 +1,1129 @@ +/* + * ov772x Camera Driver + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on ov7670 and soc_camera_platform driver, + * + * Copyright 2006-7 Jonathan Corbet + * Copyright (C) 2008 Magnus Damm + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * register offset + */ +#define GAIN 0x00 /* AGC - Gain control gain setting */ +#define BLUE 0x01 /* AWB - Blue channel gain setting */ +#define RED 0x02 /* AWB - Red channel gain setting */ +#define GREEN 0x03 /* AWB - Green channel gain setting */ +#define COM1 0x04 /* Common control 1 */ +#define BAVG 0x05 /* U/B Average Level */ +#define GAVG 0x06 /* Y/Gb Average Level */ +#define RAVG 0x07 /* V/R Average Level */ +#define AECH 0x08 /* Exposure Value - AEC MSBs */ +#define COM2 0x09 /* Common control 2 */ +#define PID 0x0A /* Product ID Number MSB */ +#define VER 0x0B /* Product ID Number LSB */ +#define COM3 0x0C /* Common control 3 */ +#define COM4 0x0D /* Common control 4 */ +#define COM5 0x0E /* Common control 5 */ +#define COM6 0x0F /* Common control 6 */ +#define AEC 0x10 /* Exposure Value */ +#define CLKRC 0x11 /* Internal clock */ +#define COM7 0x12 /* Common control 7 */ +#define COM8 0x13 /* Common control 8 */ +#define COM9 0x14 /* Common control 9 */ +#define COM10 0x15 /* Common control 10 */ +#define REG16 0x16 /* Register 16 */ +#define HSTART 0x17 /* Horizontal sensor size */ +#define HSIZE 0x18 /* Horizontal frame (HREF column) end high 8-bit */ +#define VSTART 0x19 /* Vertical frame (row) start high 8-bit */ +#define VSIZE 0x1A /* Vertical sensor size */ +#define PSHFT 0x1B /* Data format - pixel delay select */ +#define MIDH 0x1C /* Manufacturer ID byte - high */ +#define MIDL 0x1D /* Manufacturer ID byte - low */ +#define LAEC 0x1F /* Fine AEC value */ +#define COM11 0x20 /* Common control 11 */ +#define BDBASE 0x22 /* Banding filter Minimum AEC value */ +#define DBSTEP 0x23 /* Banding filter Maximum Setp */ +#define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */ +#define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */ +#define VPT 0x26 /* AGC/AEC Fast mode operating region */ +#define REG28 0x28 /* Register 28 */ +#define HOUTSIZE 0x29 /* Horizontal data output size MSBs */ +#define EXHCH 0x2A /* Dummy pixel insert MSB */ +#define EXHCL 0x2B /* Dummy pixel insert LSB */ +#define VOUTSIZE 0x2C /* Vertical data output size MSBs */ +#define ADVFL 0x2D /* LSB of insert dummy lines in Vertical direction */ +#define ADVFH 0x2E /* MSG of insert dummy lines in Vertical direction */ +#define YAVE 0x2F /* Y/G Channel Average value */ +#define LUMHTH 0x30 /* Histogram AEC/AGC Luminance high level threshold */ +#define LUMLTH 0x31 /* Histogram AEC/AGC Luminance low level threshold */ +#define HREF 0x32 /* Image start and size control */ +#define DM_LNL 0x33 /* Dummy line low 8 bits */ +#define DM_LNH 0x34 /* Dummy line high 8 bits */ +#define ADOFF_B 0x35 /* AD offset compensation value for B channel */ +#define ADOFF_R 0x36 /* AD offset compensation value for R channel */ +#define ADOFF_GB 0x37 /* AD offset compensation value for Gb channel */ +#define ADOFF_GR 0x38 /* AD offset compensation value for Gr channel */ +#define OFF_B 0x39 /* Analog process B channel offset value */ +#define OFF_R 0x3A /* Analog process R channel offset value */ +#define OFF_GB 0x3B /* Analog process Gb channel offset value */ +#define OFF_GR 0x3C /* Analog process Gr channel offset value */ +#define COM12 0x3D /* Common control 12 */ +#define COM13 0x3E /* Common control 13 */ +#define COM14 0x3F /* Common control 14 */ +#define COM15 0x40 /* Common control 15*/ +#define COM16 0x41 /* Common control 16 */ +#define TGT_B 0x42 /* BLC blue channel target value */ +#define TGT_R 0x43 /* BLC red channel target value */ +#define TGT_GB 0x44 /* BLC Gb channel target value */ +#define TGT_GR 0x45 /* BLC Gr channel target value */ +/* for ov7720 */ +#define LCC0 0x46 /* Lens correction control 0 */ +#define LCC1 0x47 /* Lens correction option 1 - X coordinate */ +#define LCC2 0x48 /* Lens correction option 2 - Y coordinate */ +#define LCC3 0x49 /* Lens correction option 3 */ +#define LCC4 0x4A /* Lens correction option 4 - radius of the circular */ +#define LCC5 0x4B /* Lens correction option 5 */ +#define LCC6 0x4C /* Lens correction option 6 */ +/* for ov7725 */ +#define LC_CTR 0x46 /* Lens correction control */ +#define LC_XC 0x47 /* X coordinate of lens correction center relative */ +#define LC_YC 0x48 /* Y coordinate of lens correction center relative */ +#define LC_COEF 0x49 /* Lens correction coefficient */ +#define LC_RADI 0x4A /* Lens correction radius */ +#define LC_COEFB 0x4B /* Lens B channel compensation coefficient */ +#define LC_COEFR 0x4C /* Lens R channel compensation coefficient */ + +#define FIXGAIN 0x4D /* Analog fix gain amplifer */ +#define AREF0 0x4E /* Sensor reference control */ +#define AREF1 0x4F /* Sensor reference current control */ +#define AREF2 0x50 /* Analog reference control */ +#define AREF3 0x51 /* ADC reference control */ +#define AREF4 0x52 /* ADC reference control */ +#define AREF5 0x53 /* ADC reference control */ +#define AREF6 0x54 /* Analog reference control */ +#define AREF7 0x55 /* Analog reference control */ +#define UFIX 0x60 /* U channel fixed value output */ +#define VFIX 0x61 /* V channel fixed value output */ +#define AWBB_BLK 0x62 /* AWB option for advanced AWB */ +#define AWB_CTRL0 0x63 /* AWB control byte 0 */ +#define DSP_CTRL1 0x64 /* DSP control byte 1 */ +#define DSP_CTRL2 0x65 /* DSP control byte 2 */ +#define DSP_CTRL3 0x66 /* DSP control byte 3 */ +#define DSP_CTRL4 0x67 /* DSP control byte 4 */ +#define AWB_BIAS 0x68 /* AWB BLC level clip */ +#define AWB_CTRL1 0x69 /* AWB control 1 */ +#define AWB_CTRL2 0x6A /* AWB control 2 */ +#define AWB_CTRL3 0x6B /* AWB control 3 */ +#define AWB_CTRL4 0x6C /* AWB control 4 */ +#define AWB_CTRL5 0x6D /* AWB control 5 */ +#define AWB_CTRL6 0x6E /* AWB control 6 */ +#define AWB_CTRL7 0x6F /* AWB control 7 */ +#define AWB_CTRL8 0x70 /* AWB control 8 */ +#define AWB_CTRL9 0x71 /* AWB control 9 */ +#define AWB_CTRL10 0x72 /* AWB control 10 */ +#define AWB_CTRL11 0x73 /* AWB control 11 */ +#define AWB_CTRL12 0x74 /* AWB control 12 */ +#define AWB_CTRL13 0x75 /* AWB control 13 */ +#define AWB_CTRL14 0x76 /* AWB control 14 */ +#define AWB_CTRL15 0x77 /* AWB control 15 */ +#define AWB_CTRL16 0x78 /* AWB control 16 */ +#define AWB_CTRL17 0x79 /* AWB control 17 */ +#define AWB_CTRL18 0x7A /* AWB control 18 */ +#define AWB_CTRL19 0x7B /* AWB control 19 */ +#define AWB_CTRL20 0x7C /* AWB control 20 */ +#define AWB_CTRL21 0x7D /* AWB control 21 */ +#define GAM1 0x7E /* Gamma Curve 1st segment input end point */ +#define GAM2 0x7F /* Gamma Curve 2nd segment input end point */ +#define GAM3 0x80 /* Gamma Curve 3rd segment input end point */ +#define GAM4 0x81 /* Gamma Curve 4th segment input end point */ +#define GAM5 0x82 /* Gamma Curve 5th segment input end point */ +#define GAM6 0x83 /* Gamma Curve 6th segment input end point */ +#define GAM7 0x84 /* Gamma Curve 7th segment input end point */ +#define GAM8 0x85 /* Gamma Curve 8th segment input end point */ +#define GAM9 0x86 /* Gamma Curve 9th segment input end point */ +#define GAM10 0x87 /* Gamma Curve 10th segment input end point */ +#define GAM11 0x88 /* Gamma Curve 11th segment input end point */ +#define GAM12 0x89 /* Gamma Curve 12th segment input end point */ +#define GAM13 0x8A /* Gamma Curve 13th segment input end point */ +#define GAM14 0x8B /* Gamma Curve 14th segment input end point */ +#define GAM15 0x8C /* Gamma Curve 15th segment input end point */ +#define SLOP 0x8D /* Gamma curve highest segment slope */ +#define DNSTH 0x8E /* De-noise threshold */ +#define EDGE_STRNGT 0x8F /* Edge strength control when manual mode */ +#define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */ +#define DNSOFF 0x91 /* Auto De-noise threshold control */ +#define EDGE_UPPER 0x92 /* Edge strength upper limit when Auto mode */ +#define EDGE_LOWER 0x93 /* Edge strength lower limit when Auto mode */ +#define MTX1 0x94 /* Matrix coefficient 1 */ +#define MTX2 0x95 /* Matrix coefficient 2 */ +#define MTX3 0x96 /* Matrix coefficient 3 */ +#define MTX4 0x97 /* Matrix coefficient 4 */ +#define MTX5 0x98 /* Matrix coefficient 5 */ +#define MTX6 0x99 /* Matrix coefficient 6 */ +#define MTX_CTRL 0x9A /* Matrix control */ +#define BRIGHT 0x9B /* Brightness control */ +#define CNTRST 0x9C /* Contrast contrast */ +#define CNTRST_CTRL 0x9D /* Contrast contrast center */ +#define UVAD_J0 0x9E /* Auto UV adjust contrast 0 */ +#define UVAD_J1 0x9F /* Auto UV adjust contrast 1 */ +#define SCAL0 0xA0 /* Scaling control 0 */ +#define SCAL1 0xA1 /* Scaling control 1 */ +#define SCAL2 0xA2 /* Scaling control 2 */ +#define FIFODLYM 0xA3 /* FIFO manual mode delay control */ +#define FIFODLYA 0xA4 /* FIFO auto mode delay control */ +#define SDE 0xA6 /* Special digital effect control */ +#define USAT 0xA7 /* U component saturation control */ +#define VSAT 0xA8 /* V component saturation control */ +/* for ov7720 */ +#define HUE0 0xA9 /* Hue control 0 */ +#define HUE1 0xAA /* Hue control 1 */ +/* for ov7725 */ +#define HUECOS 0xA9 /* Cosine value */ +#define HUESIN 0xAA /* Sine value */ + +#define SIGN 0xAB /* Sign bit for Hue and contrast */ +#define DSPAUTO 0xAC /* DSP auto function ON/OFF control */ + +/* + * register detail + */ + +/* COM2 */ +#define SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */ + /* Output drive capability */ +#define OCAP_1x 0x00 /* 1x */ +#define OCAP_2x 0x01 /* 2x */ +#define OCAP_3x 0x02 /* 3x */ +#define OCAP_4x 0x03 /* 4x */ + +/* COM3 */ +#define SWAP_MASK (SWAP_RGB | SWAP_YUV | SWAP_ML) +#define IMG_MASK (VFLIP_IMG | HFLIP_IMG) + +#define VFLIP_IMG 0x80 /* Vertical flip image ON/OFF selection */ +#define HFLIP_IMG 0x40 /* Horizontal mirror image ON/OFF selection */ +#define SWAP_RGB 0x20 /* Swap B/R output sequence in RGB mode */ +#define SWAP_YUV 0x10 /* Swap Y/UV output sequence in YUV mode */ +#define SWAP_ML 0x08 /* Swap output MSB/LSB */ + /* Tri-state option for output clock */ +#define NOTRI_CLOCK 0x04 /* 0: Tri-state at this period */ + /* 1: No tri-state at this period */ + /* Tri-state option for output data */ +#define NOTRI_DATA 0x02 /* 0: Tri-state at this period */ + /* 1: No tri-state at this period */ +#define SCOLOR_TEST 0x01 /* Sensor color bar test pattern */ + +/* COM4 */ + /* PLL frequency control */ +#define PLL_BYPASS 0x00 /* 00: Bypass PLL */ +#define PLL_4x 0x40 /* 01: PLL 4x */ +#define PLL_6x 0x80 /* 10: PLL 6x */ +#define PLL_8x 0xc0 /* 11: PLL 8x */ + /* AEC evaluate window */ +#define AEC_FULL 0x00 /* 00: Full window */ +#define AEC_1p2 0x10 /* 01: 1/2 window */ +#define AEC_1p4 0x20 /* 10: 1/4 window */ +#define AEC_2p3 0x30 /* 11: Low 2/3 window */ + +/* COM5 */ +#define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */ +#define AFR_SPPED 0x40 /* Auto frame rate control speed selection */ + /* Auto frame rate max rate control */ +#define AFR_NO_RATE 0x00 /* No reduction of frame rate */ +#define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */ +#define AFR_1p4 0x20 /* Max reduction to 1/4 frame rate */ +#define AFR_1p8 0x30 /* Max reduction to 1/8 frame rate */ + /* Auto frame rate active point control */ +#define AF_2x 0x00 /* Add frame when AGC reaches 2x gain */ +#define AF_4x 0x04 /* Add frame when AGC reaches 4x gain */ +#define AF_8x 0x08 /* Add frame when AGC reaches 8x gain */ +#define AF_16x 0x0c /* Add frame when AGC reaches 16x gain */ + /* AEC max step control */ +#define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */ + /* 1 : No limit to AEC increase step */ + +/* COM7 */ + /* SCCB Register Reset */ +#define SCCB_RESET 0x80 /* 0 : No change */ + /* 1 : Resets all registers to default */ + /* Resolution selection */ +#define SLCT_MASK 0x40 /* Mask of VGA or QVGA */ +#define SLCT_VGA 0x00 /* 0 : VGA */ +#define SLCT_QVGA 0x40 /* 1 : QVGA */ +#define ITU656_ON_OFF 0x20 /* ITU656 protocol ON/OFF selection */ +#define SENSOR_RAW 0x10 /* Sensor RAW */ + /* RGB output format control */ +#define FMT_MASK 0x0c /* Mask of color format */ +#define FMT_GBR422 0x00 /* 00 : GBR 4:2:2 */ +#define FMT_RGB565 0x04 /* 01 : RGB 565 */ +#define FMT_RGB555 0x08 /* 10 : RGB 555 */ +#define FMT_RGB444 0x0c /* 11 : RGB 444 */ + /* Output format control */ +#define OFMT_MASK 0x03 /* Mask of output format */ +#define OFMT_YUV 0x00 /* 00 : YUV */ +#define OFMT_P_BRAW 0x01 /* 01 : Processed Bayer RAW */ +#define OFMT_RGB 0x02 /* 10 : RGB */ +#define OFMT_BRAW 0x03 /* 11 : Bayer RAW */ + +/* COM8 */ +#define FAST_ALGO 0x80 /* Enable fast AGC/AEC algorithm */ + /* AEC Setp size limit */ +#define UNLMT_STEP 0x40 /* 0 : Step size is limited */ + /* 1 : Unlimited step size */ +#define BNDF_ON_OFF 0x20 /* Banding filter ON/OFF */ +#define AEC_BND 0x10 /* Enable AEC below banding value */ +#define AEC_ON_OFF 0x08 /* Fine AEC ON/OFF control */ +#define AGC_ON 0x04 /* AGC Enable */ +#define AWB_ON 0x02 /* AWB Enable */ +#define AEC_ON 0x01 /* AEC Enable */ + +/* COM9 */ +#define BASE_AECAGC 0x80 /* Histogram or average based AEC/AGC */ + /* Automatic gain ceiling - maximum AGC value */ +#define GAIN_2x 0x00 /* 000 : 2x */ +#define GAIN_4x 0x10 /* 001 : 4x */ +#define GAIN_8x 0x20 /* 010 : 8x */ +#define GAIN_16x 0x30 /* 011 : 16x */ +#define GAIN_32x 0x40 /* 100 : 32x */ +#define GAIN_64x 0x50 /* 101 : 64x */ +#define GAIN_128x 0x60 /* 110 : 128x */ +#define DROP_VSYNC 0x04 /* Drop VSYNC output of corrupt frame */ +#define DROP_HREF 0x02 /* Drop HREF output of corrupt frame */ + +/* COM11 */ +#define SGLF_ON_OFF 0x02 /* Single frame ON/OFF selection */ +#define SGLF_TRIG 0x01 /* Single frame transfer trigger */ + +/* HREF */ +#define HREF_VSTART_SHIFT 6 /* VSTART LSB */ +#define HREF_HSTART_SHIFT 4 /* HSTART 2 LSBs */ +#define HREF_VSIZE_SHIFT 2 /* VSIZE LSB */ +#define HREF_HSIZE_SHIFT 0 /* HSIZE 2 LSBs */ + +/* EXHCH */ +#define EXHCH_VSIZE_SHIFT 2 /* VOUTSIZE LSB */ +#define EXHCH_HSIZE_SHIFT 0 /* HOUTSIZE 2 LSBs */ + +/* DSP_CTRL1 */ +#define FIFO_ON 0x80 /* FIFO enable/disable selection */ +#define UV_ON_OFF 0x40 /* UV adjust function ON/OFF selection */ +#define YUV444_2_422 0x20 /* YUV444 to 422 UV channel option selection */ +#define CLR_MTRX_ON_OFF 0x10 /* Color matrix ON/OFF selection */ +#define INTPLT_ON_OFF 0x08 /* Interpolation ON/OFF selection */ +#define GMM_ON_OFF 0x04 /* Gamma function ON/OFF selection */ +#define AUTO_BLK_ON_OFF 0x02 /* Black defect auto correction ON/OFF */ +#define AUTO_WHT_ON_OFF 0x01 /* White define auto correction ON/OFF */ + +/* DSP_CTRL3 */ +#define UV_MASK 0x80 /* UV output sequence option */ +#define UV_ON 0x80 /* ON */ +#define UV_OFF 0x00 /* OFF */ +#define CBAR_MASK 0x20 /* DSP Color bar mask */ +#define CBAR_ON 0x20 /* ON */ +#define CBAR_OFF 0x00 /* OFF */ + +/* DSP_CTRL4 */ +#define DSP_OFMT_YUV 0x00 +#define DSP_OFMT_RGB 0x00 +#define DSP_OFMT_RAW8 0x02 +#define DSP_OFMT_RAW10 0x03 + +/* DSPAUTO (DSP Auto Function ON/OFF Control) */ +#define AWB_ACTRL 0x80 /* AWB auto threshold control */ +#define DENOISE_ACTRL 0x40 /* De-noise auto threshold control */ +#define EDGE_ACTRL 0x20 /* Edge enhancement auto strength control */ +#define UV_ACTRL 0x10 /* UV adjust auto slope control */ +#define SCAL0_ACTRL 0x08 /* Auto scaling factor control */ +#define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */ + +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define OV772X_MAX_WIDTH VGA_WIDTH +#define OV772X_MAX_HEIGHT VGA_HEIGHT + +/* + * ID + */ +#define OV7720 0x7720 +#define OV7725 0x7721 +#define VERSION(pid, ver) ((pid<<8)|(ver&0xFF)) + +/* + * struct + */ + +struct ov772x_color_format { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; + u8 dsp3; + u8 dsp4; + u8 com3; + u8 com7; +}; + +struct ov772x_win_size { + char *name; + unsigned char com7_bit; + struct v4l2_rect rect; +}; + +struct ov772x_priv { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct ov772x_camera_info *info; + const struct ov772x_color_format *cfmt; + const struct ov772x_win_size *win; + int model; + unsigned short flag_vflip:1; + unsigned short flag_hflip:1; + /* band_filter = COM8[5] ? 256 - BDBASE : 0 */ + unsigned short band_filter; +}; + +/* + * supported color format list + */ +static const struct ov772x_color_format ov772x_cfmts[] = { + { + .code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, + .com3 = SWAP_YUV, + .com7 = OFMT_YUV, + }, + { + .code = V4L2_MBUS_FMT_YVYU8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .dsp3 = UV_ON, + .dsp4 = DSP_OFMT_YUV, + .com3 = SWAP_YUV, + .com7 = OFMT_YUV, + }, + { + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, + .com3 = 0x0, + .com7 = OFMT_YUV, + }, + { + .code = V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, + .com3 = SWAP_RGB, + .com7 = FMT_RGB555 | OFMT_RGB, + }, + { + .code = V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, + .colorspace = V4L2_COLORSPACE_SRGB, + .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, + .com3 = 0x0, + .com7 = FMT_RGB555 | OFMT_RGB, + }, + { + .code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, + .com3 = SWAP_RGB, + .com7 = FMT_RGB565 | OFMT_RGB, + }, + { + .code = V4L2_MBUS_FMT_RGB565_2X8_BE, + .colorspace = V4L2_COLORSPACE_SRGB, + .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, + .com3 = 0x0, + .com7 = FMT_RGB565 | OFMT_RGB, + }, + { + /* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output, + * regardless of the COM7 value. We can thus only support 10-bit + * Bayer until someone figures it out. + */ + .code = V4L2_MBUS_FMT_SBGGR10_1X10, + .colorspace = V4L2_COLORSPACE_SRGB, + .dsp3 = 0x0, + .dsp4 = DSP_OFMT_RAW10, + .com3 = 0x0, + .com7 = SENSOR_RAW | OFMT_BRAW, + }, +}; + + +/* + * window size list + */ + +static const struct ov772x_win_size ov772x_win_sizes[] = { + { + .name = "VGA", + .com7_bit = SLCT_VGA, + .rect = { + .left = 140, + .top = 14, + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + }, + }, { + .name = "QVGA", + .com7_bit = SLCT_QVGA, + .rect = { + .left = 252, + .top = 6, + .width = QVGA_WIDTH, + .height = QVGA_HEIGHT, + }, + }, +}; + +/* + * general function + */ + +static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov772x_priv, subdev); +} + +static inline int ov772x_read(struct i2c_client *client, u8 addr) +{ + return i2c_smbus_read_byte_data(client, addr); +} + +static inline int ov772x_write(struct i2c_client *client, u8 addr, u8 value) +{ + return i2c_smbus_write_byte_data(client, addr, value); +} + +static int ov772x_mask_set(struct i2c_client *client, u8 command, u8 mask, + u8 set) +{ + s32 val = ov772x_read(client, command); + if (val < 0) + return val; + + val &= ~mask; + val |= set & mask; + + return ov772x_write(client, command, val); +} + +static int ov772x_reset(struct i2c_client *client) +{ + int ret; + + ret = ov772x_write(client, COM7, SCCB_RESET); + if (ret < 0) + return ret; + + msleep(1); + + return ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE); +} + +/* + * soc_camera_ops function + */ + +static int ov772x_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov772x_priv *priv = to_ov772x(sd); + + if (!enable) { + ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE); + return 0; + } + + ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0); + + dev_dbg(&client->dev, "format %d, win %s\n", + priv->cfmt->code, priv->win->name); + + return 0; +} + +static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov772x_priv *priv = container_of(ctrl->handler, + struct ov772x_priv, hdl); + struct v4l2_subdev *sd = &priv->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = 0; + u8 val; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + val = ctrl->val ? VFLIP_IMG : 0x00; + priv->flag_vflip = ctrl->val; + if (priv->info->flags & OV772X_FLAG_VFLIP) + val ^= VFLIP_IMG; + return ov772x_mask_set(client, COM3, VFLIP_IMG, val); + case V4L2_CID_HFLIP: + val = ctrl->val ? HFLIP_IMG : 0x00; + priv->flag_hflip = ctrl->val; + if (priv->info->flags & OV772X_FLAG_HFLIP) + val ^= HFLIP_IMG; + return ov772x_mask_set(client, COM3, HFLIP_IMG, val); + case V4L2_CID_BAND_STOP_FILTER: + if (!ctrl->val) { + /* Switch the filter off, it is on now */ + ret = ov772x_mask_set(client, BDBASE, 0xff, 0xff); + if (!ret) + ret = ov772x_mask_set(client, COM8, + BNDF_ON_OFF, 0); + } else { + /* Switch the filter on, set AEC low limit */ + val = 256 - ctrl->val; + ret = ov772x_mask_set(client, COM8, + BNDF_ON_OFF, BNDF_ON_OFF); + if (!ret) + ret = ov772x_mask_set(client, BDBASE, + 0xff, val); + } + if (!ret) + priv->band_filter = ctrl->val; + return ret; + } + + return -EINVAL; +} + +static int ov772x_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct ov772x_priv *priv = to_ov772x(sd); + + id->ident = priv->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov772x_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + reg->size = 1; + if (reg->reg > 0xff) + return -EINVAL; + + ret = ov772x_read(client, reg->reg); + if (ret < 0) + return ret; + + reg->val = (__u64)ret; + + return 0; +} + +static int ov772x_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg > 0xff || + reg->val > 0xff) + return -EINVAL; + + return ov772x_write(client, reg->reg, reg->val); +} +#endif + +static int ov772x_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height) +{ + const struct ov772x_win_size *win = &ov772x_win_sizes[0]; + u32 best_diff = UINT_MAX; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) { + u32 diff = abs(width - ov772x_win_sizes[i].rect.width) + + abs(height - ov772x_win_sizes[i].rect.height); + if (diff < best_diff) { + best_diff = diff; + win = &ov772x_win_sizes[i]; + } + } + + return win; +} + +static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf, + const struct ov772x_color_format **cfmt, + const struct ov772x_win_size **win) +{ + unsigned int i; + + /* Select a format. */ + *cfmt = &ov772x_cfmts[0]; + + for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) { + if (mf->code == ov772x_cfmts[i].code) { + *cfmt = &ov772x_cfmts[i]; + break; + } + } + + /* Select a window size. */ + *win = ov772x_select_win(mf->width, mf->height); +} + +static int ov772x_set_params(struct ov772x_priv *priv, + const struct ov772x_color_format *cfmt, + const struct ov772x_win_size *win) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); + int ret; + u8 val; + + /* + * reset hardware + */ + ov772x_reset(client); + + /* + * Edge Ctrl + */ + if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) { + + /* + * Manual Edge Control Mode + * + * Edge auto strength bit is set by default. + * Remove it when manual mode. + */ + + ret = ov772x_mask_set(client, DSPAUTO, EDGE_ACTRL, 0x00); + if (ret < 0) + goto ov772x_set_fmt_error; + + ret = ov772x_mask_set(client, + EDGE_TRSHLD, OV772X_EDGE_THRESHOLD_MASK, + priv->info->edgectrl.threshold); + if (ret < 0) + goto ov772x_set_fmt_error; + + ret = ov772x_mask_set(client, + EDGE_STRNGT, OV772X_EDGE_STRENGTH_MASK, + priv->info->edgectrl.strength); + if (ret < 0) + goto ov772x_set_fmt_error; + + } else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) { + /* + * Auto Edge Control Mode + * + * set upper and lower limit + */ + ret = ov772x_mask_set(client, + EDGE_UPPER, OV772X_EDGE_UPPER_MASK, + priv->info->edgectrl.upper); + if (ret < 0) + goto ov772x_set_fmt_error; + + ret = ov772x_mask_set(client, + EDGE_LOWER, OV772X_EDGE_LOWER_MASK, + priv->info->edgectrl.lower); + if (ret < 0) + goto ov772x_set_fmt_error; + } + + /* Format and window size */ + ret = ov772x_write(client, HSTART, win->rect.left >> 2); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, HSIZE, win->rect.width >> 2); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, VSTART, win->rect.top >> 1); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, VSIZE, win->rect.height >> 1); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, HOUTSIZE, win->rect.width >> 2); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, VOUTSIZE, win->rect.height >> 1); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, HREF, + ((win->rect.top & 1) << HREF_VSTART_SHIFT) | + ((win->rect.left & 3) << HREF_HSTART_SHIFT) | + ((win->rect.height & 1) << HREF_VSIZE_SHIFT) | + ((win->rect.width & 3) << HREF_HSIZE_SHIFT)); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, EXHCH, + ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) | + ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT)); + if (ret < 0) + goto ov772x_set_fmt_error; + + /* + * set DSP_CTRL3 + */ + val = cfmt->dsp3; + if (val) { + ret = ov772x_mask_set(client, + DSP_CTRL3, UV_MASK, val); + if (ret < 0) + goto ov772x_set_fmt_error; + } + + /* DSP_CTRL4: AEC reference point and DSP output format. */ + if (cfmt->dsp4) { + ret = ov772x_write(client, DSP_CTRL4, cfmt->dsp4); + if (ret < 0) + goto ov772x_set_fmt_error; + } + + /* + * set COM3 + */ + val = cfmt->com3; + if (priv->info->flags & OV772X_FLAG_VFLIP) + val |= VFLIP_IMG; + if (priv->info->flags & OV772X_FLAG_HFLIP) + val |= HFLIP_IMG; + if (priv->flag_vflip) + val ^= VFLIP_IMG; + if (priv->flag_hflip) + val ^= HFLIP_IMG; + + ret = ov772x_mask_set(client, + COM3, SWAP_MASK | IMG_MASK, val); + if (ret < 0) + goto ov772x_set_fmt_error; + + /* COM7: Sensor resolution and output format control. */ + ret = ov772x_write(client, COM7, win->com7_bit | cfmt->com7); + if (ret < 0) + goto ov772x_set_fmt_error; + + /* + * set COM8 + */ + if (priv->band_filter) { + ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1); + if (!ret) + ret = ov772x_mask_set(client, BDBASE, + 0xff, 256 - priv->band_filter); + if (ret < 0) + goto ov772x_set_fmt_error; + } + + return ret; + +ov772x_set_fmt_error: + + ov772x_reset(client); + + return ret; +} + +static int ov772x_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + a->c.left = 0; + a->c.top = 0; + a->c.width = VGA_WIDTH; + a->c.height = VGA_HEIGHT; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int ov772x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = OV772X_MAX_WIDTH; + a->bounds.height = OV772X_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ov772x_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct ov772x_priv *priv = to_ov772x(sd); + + mf->width = priv->win->rect.width; + mf->height = priv->win->rect.height; + mf->code = priv->cfmt->code; + mf->colorspace = priv->cfmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) +{ + struct ov772x_priv *priv = to_ov772x(sd); + const struct ov772x_color_format *cfmt; + const struct ov772x_win_size *win; + int ret; + + ov772x_select_params(mf, &cfmt, &win); + + ret = ov772x_set_params(priv, cfmt, win); + if (ret < 0) + return ret; + + priv->win = win; + priv->cfmt = cfmt; + + mf->code = cfmt->code; + mf->width = win->rect.width; + mf->height = win->rect.height; + mf->field = V4L2_FIELD_NONE; + mf->colorspace = cfmt->colorspace; + + return 0; +} + +static int ov772x_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + const struct ov772x_color_format *cfmt; + const struct ov772x_win_size *win; + + ov772x_select_params(mf, &cfmt, &win); + + mf->code = cfmt->code; + mf->width = win->rect.width; + mf->height = win->rect.height; + mf->field = V4L2_FIELD_NONE; + mf->colorspace = cfmt->colorspace; + + return 0; +} + +static int ov772x_video_probe(struct ov772x_priv *priv) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); + u8 pid, ver; + const char *devname; + int ret; + + ret = ov772x_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + + /* + * check and show product ID and manufacturer ID + */ + pid = ov772x_read(client, PID); + ver = ov772x_read(client, VER); + + switch (VERSION(pid, ver)) { + case OV7720: + devname = "ov7720"; + priv->model = V4L2_IDENT_OV7720; + break; + case OV7725: + devname = "ov7725"; + priv->model = V4L2_IDENT_OV7725; + break; + default: + dev_err(&client->dev, + "Product ID error %x:%x\n", pid, ver); + ret = -ENODEV; + goto done; + } + + dev_info(&client->dev, + "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", + devname, + pid, + ver, + ov772x_read(client, MIDH), + ov772x_read(client, MIDL)); + ret = v4l2_ctrl_handler_setup(&priv->hdl); + +done: + ov772x_s_power(&priv->subdev, 0); + return ret; +} + +static const struct v4l2_ctrl_ops ov772x_ctrl_ops = { + .s_ctrl = ov772x_s_ctrl, +}; + +static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = { + .g_chip_ident = ov772x_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov772x_g_register, + .s_register = ov772x_s_register, +#endif + .s_power = ov772x_s_power, +}; + +static int ov772x_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(ov772x_cfmts)) + return -EINVAL; + + *code = ov772x_cfmts[index].code; + return 0; +} + +static int ov772x_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { + .s_stream = ov772x_s_stream, + .g_mbus_fmt = ov772x_g_fmt, + .s_mbus_fmt = ov772x_s_fmt, + .try_mbus_fmt = ov772x_try_fmt, + .cropcap = ov772x_cropcap, + .g_crop = ov772x_g_crop, + .enum_mbus_fmt = ov772x_enum_fmt, + .g_mbus_config = ov772x_g_mbus_config, +}; + +static struct v4l2_subdev_ops ov772x_subdev_ops = { + .core = &ov772x_subdev_core_ops, + .video = &ov772x_subdev_video_ops, +}; + +/* + * i2c_driver function + */ + +static int ov772x_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov772x_priv *priv; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + int ret; + + if (!ssdd || !ssdd->drv_priv) { + dev_err(&client->dev, "OV772X: missing platform data!\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&adapter->dev, + "I2C-Adapter doesn't support " + "I2C_FUNC_SMBUS_BYTE_DATA\n"); + return -EIO; + } + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->info = ssdd->drv_priv; + + v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops); + v4l2_ctrl_handler_init(&priv->hdl, 3); + v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, + V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0); + priv->subdev.ctrl_handler = &priv->hdl; + if (priv->hdl.error) + return priv->hdl.error; + + ret = ov772x_video_probe(priv); + if (ret < 0) { + v4l2_ctrl_handler_free(&priv->hdl); + } else { + priv->cfmt = &ov772x_cfmts[0]; + priv->win = &ov772x_win_sizes[0]; + } + return ret; +} + +static int ov772x_remove(struct i2c_client *client) +{ + struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client)); + + v4l2_device_unregister_subdev(&priv->subdev); + v4l2_ctrl_handler_free(&priv->hdl); + return 0; +} + +static const struct i2c_device_id ov772x_id[] = { + { "ov772x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov772x_id); + +static struct i2c_driver ov772x_i2c_driver = { + .driver = { + .name = "ov772x", + }, + .probe = ov772x_probe, + .remove = ov772x_remove, + .id_table = ov772x_id, +}; + +module_i2c_driver(ov772x_i2c_driver); + +MODULE_DESCRIPTION("SoC Camera driver for ov772x"); +MODULE_AUTHOR("Kuninori Morimoto"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/ov9640.c b/drivers/media/i2c/soc_camera/ov9640.c new file mode 100644 index 00000000..20ca62d3 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov9640.c @@ -0,0 +1,756 @@ +/* + * OmniVision OV96xx Camera Driver + * + * Copyright (C) 2009 Marek Vasut + * + * Based on ov772x camera driver: + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on ov7670 and soc_camera_platform driver, + * + * Copyright 2006-7 Jonathan Corbet + * Copyright (C) 2008 Magnus Damm + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "ov9640.h" + +#define to_ov9640_sensor(sd) container_of(sd, struct ov9640_priv, subdev) + +/* default register setup */ +static const struct ov9640_reg ov9640_regs_dflt[] = { + { OV9640_COM5, OV9640_COM5_SYSCLK | OV9640_COM5_LONGEXP }, + { OV9640_COM6, OV9640_COM6_OPT_BLC | OV9640_COM6_ADBLC_BIAS | + OV9640_COM6_FMT_RST | OV9640_COM6_ADBLC_OPTEN }, + { OV9640_PSHFT, OV9640_PSHFT_VAL(0x01) }, + { OV9640_ACOM, OV9640_ACOM_2X_ANALOG | OV9640_ACOM_RSVD }, + { OV9640_TSLB, OV9640_TSLB_YUYV_UYVY }, + { OV9640_COM16, OV9640_COM16_RB_AVG }, + + /* Gamma curve P */ + { 0x6c, 0x40 }, { 0x6d, 0x30 }, { 0x6e, 0x4b }, { 0x6f, 0x60 }, + { 0x70, 0x70 }, { 0x71, 0x70 }, { 0x72, 0x70 }, { 0x73, 0x70 }, + { 0x74, 0x60 }, { 0x75, 0x60 }, { 0x76, 0x50 }, { 0x77, 0x48 }, + { 0x78, 0x3a }, { 0x79, 0x2e }, { 0x7a, 0x28 }, { 0x7b, 0x22 }, + + /* Gamma curve T */ + { 0x7c, 0x04 }, { 0x7d, 0x07 }, { 0x7e, 0x10 }, { 0x7f, 0x28 }, + { 0x80, 0x36 }, { 0x81, 0x44 }, { 0x82, 0x52 }, { 0x83, 0x60 }, + { 0x84, 0x6c }, { 0x85, 0x78 }, { 0x86, 0x8c }, { 0x87, 0x9e }, + { 0x88, 0xbb }, { 0x89, 0xd2 }, { 0x8a, 0xe6 }, +}; + +/* Configurations + * NOTE: for YUV, alter the following registers: + * COM12 |= OV9640_COM12_YUV_AVG + * + * for RGB, alter the following registers: + * COM7 |= OV9640_COM7_RGB + * COM13 |= OV9640_COM13_RGB_AVG + * COM15 |= proper RGB color encoding mode + */ +static const struct ov9640_reg ov9640_regs_qqcif[] = { + { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x0f) }, + { OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP }, + { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD }, + { OV9640_COM7, OV9640_COM7_QCIF }, + { OV9640_COM12, OV9640_COM12_RSVD }, + { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, + { OV9640_COM15, OV9640_COM15_OR_10F0 }, +}; + +static const struct ov9640_reg ov9640_regs_qqvga[] = { + { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) }, + { OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP }, + { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD }, + { OV9640_COM7, OV9640_COM7_QVGA }, + { OV9640_COM12, OV9640_COM12_RSVD }, + { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, + { OV9640_COM15, OV9640_COM15_OR_10F0 }, +}; + +static const struct ov9640_reg ov9640_regs_qcif[] = { + { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) }, + { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD }, + { OV9640_COM7, OV9640_COM7_QCIF }, + { OV9640_COM12, OV9640_COM12_RSVD }, + { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, + { OV9640_COM15, OV9640_COM15_OR_10F0 }, +}; + +static const struct ov9640_reg ov9640_regs_qvga[] = { + { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) }, + { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD }, + { OV9640_COM7, OV9640_COM7_QVGA }, + { OV9640_COM12, OV9640_COM12_RSVD }, + { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, + { OV9640_COM15, OV9640_COM15_OR_10F0 }, +}; + +static const struct ov9640_reg ov9640_regs_cif[] = { + { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) }, + { OV9640_COM3, OV9640_COM3_VP }, + { OV9640_COM7, OV9640_COM7_CIF }, + { OV9640_COM12, OV9640_COM12_RSVD }, + { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, + { OV9640_COM15, OV9640_COM15_OR_10F0 }, +}; + +static const struct ov9640_reg ov9640_regs_vga[] = { + { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) }, + { OV9640_COM3, OV9640_COM3_VP }, + { OV9640_COM7, OV9640_COM7_VGA }, + { OV9640_COM12, OV9640_COM12_RSVD }, + { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, + { OV9640_COM15, OV9640_COM15_OR_10F0 }, +}; + +static const struct ov9640_reg ov9640_regs_sxga[] = { + { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) }, + { OV9640_COM3, OV9640_COM3_VP }, + { OV9640_COM7, 0 }, + { OV9640_COM12, OV9640_COM12_RSVD }, + { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, + { OV9640_COM15, OV9640_COM15_OR_10F0 }, +}; + +static const struct ov9640_reg ov9640_regs_yuv[] = { + { OV9640_MTX1, 0x58 }, + { OV9640_MTX2, 0x48 }, + { OV9640_MTX3, 0x10 }, + { OV9640_MTX4, 0x28 }, + { OV9640_MTX5, 0x48 }, + { OV9640_MTX6, 0x70 }, + { OV9640_MTX7, 0x40 }, + { OV9640_MTX8, 0x40 }, + { OV9640_MTX9, 0x40 }, + { OV9640_MTXS, 0x0f }, +}; + +static const struct ov9640_reg ov9640_regs_rgb[] = { + { OV9640_MTX1, 0x71 }, + { OV9640_MTX2, 0x3e }, + { OV9640_MTX3, 0x0c }, + { OV9640_MTX4, 0x33 }, + { OV9640_MTX5, 0x72 }, + { OV9640_MTX6, 0x00 }, + { OV9640_MTX7, 0x2b }, + { OV9640_MTX8, 0x66 }, + { OV9640_MTX9, 0xd2 }, + { OV9640_MTXS, 0x65 }, +}; + +static enum v4l2_mbus_pixelcode ov9640_codes[] = { + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, + V4L2_MBUS_FMT_RGB565_2X8_LE, +}; + +/* read a register */ +static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val) +{ + int ret; + u8 data = reg; + struct i2c_msg msg = { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &data, + }; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) + goto err; + + msg.flags = I2C_M_RD; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) + goto err; + + *val = data; + return 0; + +err: + dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg); + return ret; +} + +/* write a register */ +static int ov9640_reg_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret; + u8 _val; + unsigned char data[2] = { reg, val }; + struct i2c_msg msg = { + .addr = client->addr, + .flags = 0, + .len = 2, + .buf = data, + }; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg); + return ret; + } + + /* we have to read the register back ... no idea why, maybe HW bug */ + ret = ov9640_reg_read(client, reg, &_val); + if (ret) + dev_err(&client->dev, + "Failed reading back register 0x%02x!\n", reg); + + return 0; +} + + +/* Read a register, alter its bits, write it back */ +static int ov9640_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 unset) +{ + u8 val; + int ret; + + ret = ov9640_reg_read(client, reg, &val); + if (ret) { + dev_err(&client->dev, + "[Read]-Modify-Write of register %02x failed!\n", reg); + return val; + } + + val |= set; + val &= ~unset; + + ret = ov9640_reg_write(client, reg, val); + if (ret) + dev_err(&client->dev, + "Read-Modify-[Write] of register %02x failed!\n", reg); + + return ret; +} + +/* Soft reset the camera. This has nothing to do with the RESET pin! */ +static int ov9640_reset(struct i2c_client *client) +{ + int ret; + + ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET); + if (ret) + dev_err(&client->dev, + "An error occurred while entering soft reset!\n"); + + return ret; +} + +/* Start/Stop streaming from the device */ +static int ov9640_s_stream(struct v4l2_subdev *sd, int enable) +{ + return 0; +} + +/* Set status of additional camera capabilities */ +static int ov9640_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov9640_priv *priv = container_of(ctrl->handler, struct ov9640_priv, hdl); + struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->val) + return ov9640_reg_rmw(client, OV9640_MVFP, + OV9640_MVFP_V, 0); + return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_V); + case V4L2_CID_HFLIP: + if (ctrl->val) + return ov9640_reg_rmw(client, OV9640_MVFP, + OV9640_MVFP_H, 0); + return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_H); + } + return -EINVAL; +} + +/* Get chip identification */ +static int ov9640_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct ov9640_priv *priv = to_ov9640_sensor(sd); + + id->ident = priv->model; + id->revision = priv->revision; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov9640_get_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + u8 val; + + if (reg->reg & ~0xff) + return -EINVAL; + + reg->size = 1; + + ret = ov9640_reg_read(client, reg->reg, &val); + if (ret) + return ret; + + reg->val = (__u64)val; + + return 0; +} + +static int ov9640_set_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg & ~0xff || reg->val & ~0xff) + return -EINVAL; + + return ov9640_reg_write(client, reg->reg, reg->val); +} +#endif + +static int ov9640_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +/* select nearest higher resolution for capture */ +static void ov9640_res_roundup(u32 *width, u32 *height) +{ + int i; + enum { QQCIF, QQVGA, QCIF, QVGA, CIF, VGA, SXGA }; + int res_x[] = { 88, 160, 176, 320, 352, 640, 1280 }; + int res_y[] = { 72, 120, 144, 240, 288, 480, 960 }; + + for (i = 0; i < ARRAY_SIZE(res_x); i++) { + if (res_x[i] >= *width && res_y[i] >= *height) { + *width = res_x[i]; + *height = res_y[i]; + return; + } + } + + *width = res_x[SXGA]; + *height = res_y[SXGA]; +} + +/* Prepare necessary register changes depending on color encoding */ +static void ov9640_alter_regs(enum v4l2_mbus_pixelcode code, + struct ov9640_reg_alt *alt) +{ + switch (code) { + default: + case V4L2_MBUS_FMT_UYVY8_2X8: + alt->com12 = OV9640_COM12_YUV_AVG; + alt->com13 = OV9640_COM13_Y_DELAY_EN | + OV9640_COM13_YUV_DLY(0x01); + break; + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE: + alt->com7 = OV9640_COM7_RGB; + alt->com13 = OV9640_COM13_RGB_AVG; + alt->com15 = OV9640_COM15_RGB_555; + break; + case V4L2_MBUS_FMT_RGB565_2X8_LE: + alt->com7 = OV9640_COM7_RGB; + alt->com13 = OV9640_COM13_RGB_AVG; + alt->com15 = OV9640_COM15_RGB_565; + break; + }; +} + +/* Setup registers according to resolution and color encoding */ +static int ov9640_write_regs(struct i2c_client *client, u32 width, + enum v4l2_mbus_pixelcode code, struct ov9640_reg_alt *alts) +{ + const struct ov9640_reg *ov9640_regs, *matrix_regs; + int ov9640_regs_len, matrix_regs_len; + int i, ret; + u8 val; + + /* select register configuration for given resolution */ + switch (width) { + case W_QQCIF: + ov9640_regs = ov9640_regs_qqcif; + ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqcif); + break; + case W_QQVGA: + ov9640_regs = ov9640_regs_qqvga; + ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqvga); + break; + case W_QCIF: + ov9640_regs = ov9640_regs_qcif; + ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qcif); + break; + case W_QVGA: + ov9640_regs = ov9640_regs_qvga; + ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qvga); + break; + case W_CIF: + ov9640_regs = ov9640_regs_cif; + ov9640_regs_len = ARRAY_SIZE(ov9640_regs_cif); + break; + case W_VGA: + ov9640_regs = ov9640_regs_vga; + ov9640_regs_len = ARRAY_SIZE(ov9640_regs_vga); + break; + case W_SXGA: + ov9640_regs = ov9640_regs_sxga; + ov9640_regs_len = ARRAY_SIZE(ov9640_regs_sxga); + break; + default: + dev_err(&client->dev, "Failed to select resolution!\n"); + return -EINVAL; + } + + /* select color matrix configuration for given color encoding */ + if (code == V4L2_MBUS_FMT_UYVY8_2X8) { + matrix_regs = ov9640_regs_yuv; + matrix_regs_len = ARRAY_SIZE(ov9640_regs_yuv); + } else { + matrix_regs = ov9640_regs_rgb; + matrix_regs_len = ARRAY_SIZE(ov9640_regs_rgb); + } + + /* write register settings into the module */ + for (i = 0; i < ov9640_regs_len; i++) { + val = ov9640_regs[i].val; + + switch (ov9640_regs[i].reg) { + case OV9640_COM7: + val |= alts->com7; + break; + case OV9640_COM12: + val |= alts->com12; + break; + case OV9640_COM13: + val |= alts->com13; + break; + case OV9640_COM15: + val |= alts->com15; + break; + } + + ret = ov9640_reg_write(client, ov9640_regs[i].reg, val); + if (ret) + return ret; + } + + /* write color matrix configuration into the module */ + for (i = 0; i < matrix_regs_len; i++) { + ret = ov9640_reg_write(client, matrix_regs[i].reg, + matrix_regs[i].val); + if (ret) + return ret; + } + + return 0; +} + +/* program default register values */ +static int ov9640_prog_dflt(struct i2c_client *client) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(ov9640_regs_dflt); i++) { + ret = ov9640_reg_write(client, ov9640_regs_dflt[i].reg, + ov9640_regs_dflt[i].val); + if (ret) + return ret; + } + + /* wait for the changes to actually happen, 140ms are not enough yet */ + mdelay(150); + + return 0; +} + +/* set the format we will capture in */ +static int ov9640_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov9640_reg_alt alts = {0}; + enum v4l2_colorspace cspace; + enum v4l2_mbus_pixelcode code = mf->code; + int ret; + + ov9640_res_roundup(&mf->width, &mf->height); + ov9640_alter_regs(mf->code, &alts); + + ov9640_reset(client); + + ret = ov9640_prog_dflt(client); + if (ret) + return ret; + + switch (code) { + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE: + case V4L2_MBUS_FMT_RGB565_2X8_LE: + cspace = V4L2_COLORSPACE_SRGB; + break; + default: + code = V4L2_MBUS_FMT_UYVY8_2X8; + case V4L2_MBUS_FMT_UYVY8_2X8: + cspace = V4L2_COLORSPACE_JPEG; + } + + ret = ov9640_write_regs(client, mf->width, code, &alts); + if (!ret) { + mf->code = code; + mf->colorspace = cspace; + } + + return ret; +} + +static int ov9640_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + ov9640_res_roundup(&mf->width, &mf->height); + + mf->field = V4L2_FIELD_NONE; + + switch (mf->code) { + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE: + case V4L2_MBUS_FMT_RGB565_2X8_LE: + mf->colorspace = V4L2_COLORSPACE_SRGB; + break; + default: + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + case V4L2_MBUS_FMT_UYVY8_2X8: + mf->colorspace = V4L2_COLORSPACE_JPEG; + } + + return 0; +} + +static int ov9640_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(ov9640_codes)) + return -EINVAL; + + *code = ov9640_codes[index]; + return 0; +} + +static int ov9640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + a->c.left = 0; + a->c.top = 0; + a->c.width = W_SXGA; + a->c.height = H_SXGA; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int ov9640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = W_SXGA; + a->bounds.height = H_SXGA; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ov9640_video_probe(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov9640_priv *priv = to_ov9640_sensor(sd); + u8 pid, ver, midh, midl; + const char *devname; + int ret; + + ret = ov9640_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + + /* + * check and show product ID and manufacturer ID + */ + + ret = ov9640_reg_read(client, OV9640_PID, &pid); + if (!ret) + ret = ov9640_reg_read(client, OV9640_VER, &ver); + if (!ret) + ret = ov9640_reg_read(client, OV9640_MIDH, &midh); + if (!ret) + ret = ov9640_reg_read(client, OV9640_MIDL, &midl); + if (ret) + goto done; + + switch (VERSION(pid, ver)) { + case OV9640_V2: + devname = "ov9640"; + priv->model = V4L2_IDENT_OV9640; + priv->revision = 2; + break; + case OV9640_V3: + devname = "ov9640"; + priv->model = V4L2_IDENT_OV9640; + priv->revision = 3; + break; + default: + dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver); + ret = -ENODEV; + goto done; + } + + dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", + devname, pid, ver, midh, midl); + + ret = v4l2_ctrl_handler_setup(&priv->hdl); + +done: + ov9640_s_power(&priv->subdev, 0); + return ret; +} + +static const struct v4l2_ctrl_ops ov9640_ctrl_ops = { + .s_ctrl = ov9640_s_ctrl, +}; + +static struct v4l2_subdev_core_ops ov9640_core_ops = { + .g_chip_ident = ov9640_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov9640_get_register, + .s_register = ov9640_set_register, +#endif + .s_power = ov9640_s_power, +}; + +/* Request bus settings on camera side */ +static int ov9640_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static struct v4l2_subdev_video_ops ov9640_video_ops = { + .s_stream = ov9640_s_stream, + .s_mbus_fmt = ov9640_s_fmt, + .try_mbus_fmt = ov9640_try_fmt, + .enum_mbus_fmt = ov9640_enum_fmt, + .cropcap = ov9640_cropcap, + .g_crop = ov9640_g_crop, + .g_mbus_config = ov9640_g_mbus_config, +}; + +static struct v4l2_subdev_ops ov9640_subdev_ops = { + .core = &ov9640_core_ops, + .video = &ov9640_video_ops, +}; + +/* + * i2c_driver function + */ +static int ov9640_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov9640_priv *priv; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + int ret; + + if (!ssdd) { + dev_err(&client->dev, "Missing platform_data for driver\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&client->dev, sizeof(struct ov9640_priv), GFP_KERNEL); + if (!priv) { + dev_err(&client->dev, + "Failed to allocate memory for private data!\n"); + return -ENOMEM; + } + + v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops); + + v4l2_ctrl_handler_init(&priv->hdl, 2); + v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + priv->subdev.ctrl_handler = &priv->hdl; + if (priv->hdl.error) + return priv->hdl.error; + + ret = ov9640_video_probe(client); + + if (ret) + v4l2_ctrl_handler_free(&priv->hdl); + + return ret; +} + +static int ov9640_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov9640_priv *priv = to_ov9640_sensor(sd); + + v4l2_device_unregister_subdev(&priv->subdev); + v4l2_ctrl_handler_free(&priv->hdl); + return 0; +} + +static const struct i2c_device_id ov9640_id[] = { + { "ov9640", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov9640_id); + +static struct i2c_driver ov9640_i2c_driver = { + .driver = { + .name = "ov9640", + }, + .probe = ov9640_probe, + .remove = ov9640_remove, + .id_table = ov9640_id, +}; + +module_i2c_driver(ov9640_i2c_driver); + +MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV96xx"); +MODULE_AUTHOR("Marek Vasut "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/ov9640.h b/drivers/media/i2c/soc_camera/ov9640.h new file mode 100644 index 00000000..6b33a972 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov9640.h @@ -0,0 +1,207 @@ +/* + * OmniVision OV96xx Camera Header File + * + * Copyright (C) 2009 Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DRIVERS_MEDIA_VIDEO_OV9640_H__ +#define __DRIVERS_MEDIA_VIDEO_OV9640_H__ + +/* Register definitions */ +#define OV9640_GAIN 0x00 +#define OV9640_BLUE 0x01 +#define OV9640_RED 0x02 +#define OV9640_VFER 0x03 +#define OV9640_COM1 0x04 +#define OV9640_BAVE 0x05 +#define OV9640_GEAVE 0x06 +#define OV9640_RSID 0x07 +#define OV9640_RAVE 0x08 +#define OV9640_COM2 0x09 +#define OV9640_PID 0x0a +#define OV9640_VER 0x0b +#define OV9640_COM3 0x0c +#define OV9640_COM4 0x0d +#define OV9640_COM5 0x0e +#define OV9640_COM6 0x0f +#define OV9640_AECH 0x10 +#define OV9640_CLKRC 0x11 +#define OV9640_COM7 0x12 +#define OV9640_COM8 0x13 +#define OV9640_COM9 0x14 +#define OV9640_COM10 0x15 +/* 0x16 - RESERVED */ +#define OV9640_HSTART 0x17 +#define OV9640_HSTOP 0x18 +#define OV9640_VSTART 0x19 +#define OV9640_VSTOP 0x1a +#define OV9640_PSHFT 0x1b +#define OV9640_MIDH 0x1c +#define OV9640_MIDL 0x1d +#define OV9640_MVFP 0x1e +#define OV9640_LAEC 0x1f +#define OV9640_BOS 0x20 +#define OV9640_GBOS 0x21 +#define OV9640_GROS 0x22 +#define OV9640_ROS 0x23 +#define OV9640_AEW 0x24 +#define OV9640_AEB 0x25 +#define OV9640_VPT 0x26 +#define OV9640_BBIAS 0x27 +#define OV9640_GBBIAS 0x28 +/* 0x29 - RESERVED */ +#define OV9640_EXHCH 0x2a +#define OV9640_EXHCL 0x2b +#define OV9640_RBIAS 0x2c +#define OV9640_ADVFL 0x2d +#define OV9640_ADVFH 0x2e +#define OV9640_YAVE 0x2f +#define OV9640_HSYST 0x30 +#define OV9640_HSYEN 0x31 +#define OV9640_HREF 0x32 +#define OV9640_CHLF 0x33 +#define OV9640_ARBLM 0x34 +/* 0x35..0x36 - RESERVED */ +#define OV9640_ADC 0x37 +#define OV9640_ACOM 0x38 +#define OV9640_OFON 0x39 +#define OV9640_TSLB 0x3a +#define OV9640_COM11 0x3b +#define OV9640_COM12 0x3c +#define OV9640_COM13 0x3d +#define OV9640_COM14 0x3e +#define OV9640_EDGE 0x3f +#define OV9640_COM15 0x40 +#define OV9640_COM16 0x41 +#define OV9640_COM17 0x42 +/* 0x43..0x4e - RESERVED */ +#define OV9640_MTX1 0x4f +#define OV9640_MTX2 0x50 +#define OV9640_MTX3 0x51 +#define OV9640_MTX4 0x52 +#define OV9640_MTX5 0x53 +#define OV9640_MTX6 0x54 +#define OV9640_MTX7 0x55 +#define OV9640_MTX8 0x56 +#define OV9640_MTX9 0x57 +#define OV9640_MTXS 0x58 +/* 0x59..0x61 - RESERVED */ +#define OV9640_LCC1 0x62 +#define OV9640_LCC2 0x63 +#define OV9640_LCC3 0x64 +#define OV9640_LCC4 0x65 +#define OV9640_LCC5 0x66 +#define OV9640_MANU 0x67 +#define OV9640_MANV 0x68 +#define OV9640_HV 0x69 +#define OV9640_MBD 0x6a +#define OV9640_DBLV 0x6b +#define OV9640_GSP 0x6c /* ... till 0x7b */ +#define OV9640_GST 0x7c /* ... till 0x8a */ + +#define OV9640_CLKRC_DPLL_EN 0x80 +#define OV9640_CLKRC_DIRECT 0x40 +#define OV9640_CLKRC_DIV(x) ((x) & 0x3f) + +#define OV9640_PSHFT_VAL(x) ((x) & 0xff) + +#define OV9640_ACOM_2X_ANALOG 0x80 +#define OV9640_ACOM_RSVD 0x12 + +#define OV9640_MVFP_V 0x10 +#define OV9640_MVFP_H 0x20 + +#define OV9640_COM1_HREF_NOSKIP 0x00 +#define OV9640_COM1_HREF_2SKIP 0x04 +#define OV9640_COM1_HREF_3SKIP 0x08 +#define OV9640_COM1_QQFMT 0x20 + +#define OV9640_COM2_SSM 0x10 + +#define OV9640_COM3_VP 0x04 + +#define OV9640_COM4_QQ_VP 0x80 +#define OV9640_COM4_RSVD 0x40 + +#define OV9640_COM5_SYSCLK 0x80 +#define OV9640_COM5_LONGEXP 0x01 + +#define OV9640_COM6_OPT_BLC 0x40 +#define OV9640_COM6_ADBLC_BIAS 0x08 +#define OV9640_COM6_FMT_RST 0x82 +#define OV9640_COM6_ADBLC_OPTEN 0x01 + +#define OV9640_COM7_RAW_RGB 0x01 +#define OV9640_COM7_RGB 0x04 +#define OV9640_COM7_QCIF 0x08 +#define OV9640_COM7_QVGA 0x10 +#define OV9640_COM7_CIF 0x20 +#define OV9640_COM7_VGA 0x40 +#define OV9640_COM7_SCCB_RESET 0x80 + +#define OV9640_TSLB_YVYU_YUYV 0x04 +#define OV9640_TSLB_YUYV_UYVY 0x08 + +#define OV9640_COM12_YUV_AVG 0x04 +#define OV9640_COM12_RSVD 0x40 + +#define OV9640_COM13_GAMMA_NONE 0x00 +#define OV9640_COM13_GAMMA_Y 0x40 +#define OV9640_COM13_GAMMA_RAW 0x80 +#define OV9640_COM13_RGB_AVG 0x20 +#define OV9640_COM13_MATRIX_EN 0x10 +#define OV9640_COM13_Y_DELAY_EN 0x08 +#define OV9640_COM13_YUV_DLY(x) ((x) & 0x07) + +#define OV9640_COM15_OR_00FF 0x00 +#define OV9640_COM15_OR_01FE 0x40 +#define OV9640_COM15_OR_10F0 0xc0 +#define OV9640_COM15_RGB_NORM 0x00 +#define OV9640_COM15_RGB_565 0x10 +#define OV9640_COM15_RGB_555 0x30 + +#define OV9640_COM16_RB_AVG 0x01 + +/* IDs */ +#define OV9640_V2 0x9648 +#define OV9640_V3 0x9649 +#define VERSION(pid, ver) (((pid) << 8) | ((ver) & 0xFF)) + +/* supported resolutions */ +enum { + W_QQCIF = 88, + W_QQVGA = 160, + W_QCIF = 176, + W_QVGA = 320, + W_CIF = 352, + W_VGA = 640, + W_SXGA = 1280 +}; +#define H_SXGA 960 + +/* Misc. structures */ +struct ov9640_reg_alt { + u8 com7; + u8 com12; + u8 com13; + u8 com15; +}; + +struct ov9640_reg { + u8 reg; + u8 val; +}; + +struct ov9640_priv { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + + int model; + int revision; +}; + +#endif /* __DRIVERS_MEDIA_VIDEO_OV9640_H__ */ diff --git a/drivers/media/i2c/soc_camera/ov9740.c b/drivers/media/i2c/soc_camera/ov9740.c new file mode 100644 index 00000000..012bd627 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov9740.c @@ -0,0 +1,1013 @@ +/* + * OmniVision OV9740 Camera Driver + * + * Copyright (C) 2011 NVIDIA Corporation + * + * Based on ov9640 camera driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#define to_ov9740(sd) container_of(sd, struct ov9740_priv, subdev) + +/* General Status Registers */ +#define OV9740_MODEL_ID_HI 0x0000 +#define OV9740_MODEL_ID_LO 0x0001 +#define OV9740_REVISION_NUMBER 0x0002 +#define OV9740_MANUFACTURER_ID 0x0003 +#define OV9740_SMIA_VERSION 0x0004 + +/* General Setup Registers */ +#define OV9740_MODE_SELECT 0x0100 +#define OV9740_IMAGE_ORT 0x0101 +#define OV9740_SOFTWARE_RESET 0x0103 +#define OV9740_GRP_PARAM_HOLD 0x0104 +#define OV9740_MSK_CORRUP_FM 0x0105 + +/* Timing Setting */ +#define OV9740_FRM_LENGTH_LN_HI 0x0340 /* VTS */ +#define OV9740_FRM_LENGTH_LN_LO 0x0341 /* VTS */ +#define OV9740_LN_LENGTH_PCK_HI 0x0342 /* HTS */ +#define OV9740_LN_LENGTH_PCK_LO 0x0343 /* HTS */ +#define OV9740_X_ADDR_START_HI 0x0344 +#define OV9740_X_ADDR_START_LO 0x0345 +#define OV9740_Y_ADDR_START_HI 0x0346 +#define OV9740_Y_ADDR_START_LO 0x0347 +#define OV9740_X_ADDR_END_HI 0x0348 +#define OV9740_X_ADDR_END_LO 0x0349 +#define OV9740_Y_ADDR_END_HI 0x034a +#define OV9740_Y_ADDR_END_LO 0x034b +#define OV9740_X_OUTPUT_SIZE_HI 0x034c +#define OV9740_X_OUTPUT_SIZE_LO 0x034d +#define OV9740_Y_OUTPUT_SIZE_HI 0x034e +#define OV9740_Y_OUTPUT_SIZE_LO 0x034f + +/* IO Control Registers */ +#define OV9740_IO_CREL00 0x3002 +#define OV9740_IO_CREL01 0x3004 +#define OV9740_IO_CREL02 0x3005 +#define OV9740_IO_OUTPUT_SEL01 0x3026 +#define OV9740_IO_OUTPUT_SEL02 0x3027 + +/* AWB Registers */ +#define OV9740_AWB_MANUAL_CTRL 0x3406 + +/* Analog Control Registers */ +#define OV9740_ANALOG_CTRL01 0x3601 +#define OV9740_ANALOG_CTRL02 0x3602 +#define OV9740_ANALOG_CTRL03 0x3603 +#define OV9740_ANALOG_CTRL04 0x3604 +#define OV9740_ANALOG_CTRL10 0x3610 +#define OV9740_ANALOG_CTRL12 0x3612 +#define OV9740_ANALOG_CTRL15 0x3615 +#define OV9740_ANALOG_CTRL20 0x3620 +#define OV9740_ANALOG_CTRL21 0x3621 +#define OV9740_ANALOG_CTRL22 0x3622 +#define OV9740_ANALOG_CTRL30 0x3630 +#define OV9740_ANALOG_CTRL31 0x3631 +#define OV9740_ANALOG_CTRL32 0x3632 +#define OV9740_ANALOG_CTRL33 0x3633 + +/* Sensor Control */ +#define OV9740_SENSOR_CTRL03 0x3703 +#define OV9740_SENSOR_CTRL04 0x3704 +#define OV9740_SENSOR_CTRL05 0x3705 +#define OV9740_SENSOR_CTRL07 0x3707 + +/* Timing Control */ +#define OV9740_TIMING_CTRL17 0x3817 +#define OV9740_TIMING_CTRL19 0x3819 +#define OV9740_TIMING_CTRL33 0x3833 +#define OV9740_TIMING_CTRL35 0x3835 + +/* Banding Filter */ +#define OV9740_AEC_MAXEXPO_60_H 0x3a02 +#define OV9740_AEC_MAXEXPO_60_L 0x3a03 +#define OV9740_AEC_B50_STEP_HI 0x3a08 +#define OV9740_AEC_B50_STEP_LO 0x3a09 +#define OV9740_AEC_B60_STEP_HI 0x3a0a +#define OV9740_AEC_B60_STEP_LO 0x3a0b +#define OV9740_AEC_CTRL0D 0x3a0d +#define OV9740_AEC_CTRL0E 0x3a0e +#define OV9740_AEC_MAXEXPO_50_H 0x3a14 +#define OV9740_AEC_MAXEXPO_50_L 0x3a15 + +/* AEC/AGC Control */ +#define OV9740_AEC_ENABLE 0x3503 +#define OV9740_GAIN_CEILING_01 0x3a18 +#define OV9740_GAIN_CEILING_02 0x3a19 +#define OV9740_AEC_HI_THRESHOLD 0x3a11 +#define OV9740_AEC_3A1A 0x3a1a +#define OV9740_AEC_CTRL1B_WPT2 0x3a1b +#define OV9740_AEC_CTRL0F_WPT 0x3a0f +#define OV9740_AEC_CTRL10_BPT 0x3a10 +#define OV9740_AEC_CTRL1E_BPT2 0x3a1e +#define OV9740_AEC_LO_THRESHOLD 0x3a1f + +/* BLC Control */ +#define OV9740_BLC_AUTO_ENABLE 0x4002 +#define OV9740_BLC_MODE 0x4005 + +/* VFIFO */ +#define OV9740_VFIFO_READ_START_HI 0x4608 +#define OV9740_VFIFO_READ_START_LO 0x4609 + +/* DVP Control */ +#define OV9740_DVP_VSYNC_CTRL02 0x4702 +#define OV9740_DVP_VSYNC_MODE 0x4704 +#define OV9740_DVP_VSYNC_CTRL06 0x4706 + +/* PLL Setting */ +#define OV9740_PLL_MODE_CTRL01 0x3104 +#define OV9740_PRE_PLL_CLK_DIV 0x0305 +#define OV9740_PLL_MULTIPLIER 0x0307 +#define OV9740_VT_SYS_CLK_DIV 0x0303 +#define OV9740_VT_PIX_CLK_DIV 0x0301 +#define OV9740_PLL_CTRL3010 0x3010 +#define OV9740_VFIFO_CTRL00 0x460e + +/* ISP Control */ +#define OV9740_ISP_CTRL00 0x5000 +#define OV9740_ISP_CTRL01 0x5001 +#define OV9740_ISP_CTRL03 0x5003 +#define OV9740_ISP_CTRL05 0x5005 +#define OV9740_ISP_CTRL12 0x5012 +#define OV9740_ISP_CTRL19 0x5019 +#define OV9740_ISP_CTRL1A 0x501a +#define OV9740_ISP_CTRL1E 0x501e +#define OV9740_ISP_CTRL1F 0x501f +#define OV9740_ISP_CTRL20 0x5020 +#define OV9740_ISP_CTRL21 0x5021 + +/* AWB */ +#define OV9740_AWB_CTRL00 0x5180 +#define OV9740_AWB_CTRL01 0x5181 +#define OV9740_AWB_CTRL02 0x5182 +#define OV9740_AWB_CTRL03 0x5183 +#define OV9740_AWB_ADV_CTRL01 0x5184 +#define OV9740_AWB_ADV_CTRL02 0x5185 +#define OV9740_AWB_ADV_CTRL03 0x5186 +#define OV9740_AWB_ADV_CTRL04 0x5187 +#define OV9740_AWB_ADV_CTRL05 0x5188 +#define OV9740_AWB_ADV_CTRL06 0x5189 +#define OV9740_AWB_ADV_CTRL07 0x518a +#define OV9740_AWB_ADV_CTRL08 0x518b +#define OV9740_AWB_ADV_CTRL09 0x518c +#define OV9740_AWB_ADV_CTRL10 0x518d +#define OV9740_AWB_ADV_CTRL11 0x518e +#define OV9740_AWB_CTRL0F 0x518f +#define OV9740_AWB_CTRL10 0x5190 +#define OV9740_AWB_CTRL11 0x5191 +#define OV9740_AWB_CTRL12 0x5192 +#define OV9740_AWB_CTRL13 0x5193 +#define OV9740_AWB_CTRL14 0x5194 + +/* MIPI Control */ +#define OV9740_MIPI_CTRL00 0x4800 +#define OV9740_MIPI_3837 0x3837 +#define OV9740_MIPI_CTRL01 0x4801 +#define OV9740_MIPI_CTRL03 0x4803 +#define OV9740_MIPI_CTRL05 0x4805 +#define OV9740_VFIFO_RD_CTRL 0x4601 +#define OV9740_MIPI_CTRL_3012 0x3012 +#define OV9740_SC_CMMM_MIPI_CTR 0x3014 + +#define OV9740_MAX_WIDTH 1280 +#define OV9740_MAX_HEIGHT 720 + +/* Misc. structures */ +struct ov9740_reg { + u16 reg; + u8 val; +}; + +struct ov9740_priv { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + + int ident; + u16 model; + u8 revision; + u8 manid; + u8 smiaver; + + bool flag_vflip; + bool flag_hflip; + + /* For suspend/resume. */ + struct v4l2_mbus_framefmt current_mf; + bool current_enable; +}; + +static const struct ov9740_reg ov9740_defaults[] = { + /* Software Reset */ + { OV9740_SOFTWARE_RESET, 0x01 }, + + /* Banding Filter */ + { OV9740_AEC_B50_STEP_HI, 0x00 }, + { OV9740_AEC_B50_STEP_LO, 0xe8 }, + { OV9740_AEC_CTRL0E, 0x03 }, + { OV9740_AEC_MAXEXPO_50_H, 0x15 }, + { OV9740_AEC_MAXEXPO_50_L, 0xc6 }, + { OV9740_AEC_B60_STEP_HI, 0x00 }, + { OV9740_AEC_B60_STEP_LO, 0xc0 }, + { OV9740_AEC_CTRL0D, 0x04 }, + { OV9740_AEC_MAXEXPO_60_H, 0x18 }, + { OV9740_AEC_MAXEXPO_60_L, 0x20 }, + + /* LC */ + { 0x5842, 0x02 }, { 0x5843, 0x5e }, { 0x5844, 0x04 }, { 0x5845, 0x32 }, + { 0x5846, 0x03 }, { 0x5847, 0x29 }, { 0x5848, 0x02 }, { 0x5849, 0xcc }, + + /* Un-documented OV9740 registers */ + { 0x5800, 0x29 }, { 0x5801, 0x25 }, { 0x5802, 0x20 }, { 0x5803, 0x21 }, + { 0x5804, 0x26 }, { 0x5805, 0x2e }, { 0x5806, 0x11 }, { 0x5807, 0x0c }, + { 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580a, 0x0e }, { 0x580b, 0x16 }, + { 0x580c, 0x06 }, { 0x580d, 0x02 }, { 0x580e, 0x00 }, { 0x580f, 0x00 }, + { 0x5810, 0x04 }, { 0x5811, 0x0a }, { 0x5812, 0x05 }, { 0x5813, 0x02 }, + { 0x5814, 0x00 }, { 0x5815, 0x00 }, { 0x5816, 0x03 }, { 0x5817, 0x09 }, + { 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581a, 0x07 }, { 0x581b, 0x08 }, + { 0x581c, 0x0b }, { 0x581d, 0x14 }, { 0x581e, 0x28 }, { 0x581f, 0x23 }, + { 0x5820, 0x1d }, { 0x5821, 0x1e }, { 0x5822, 0x24 }, { 0x5823, 0x2a }, + { 0x5824, 0x4f }, { 0x5825, 0x6f }, { 0x5826, 0x5f }, { 0x5827, 0x7f }, + { 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582a, 0x8f }, { 0x582b, 0x9e }, + { 0x582c, 0x8f }, { 0x582d, 0x9f }, { 0x582e, 0x4f }, { 0x582f, 0x87 }, + { 0x5830, 0x86 }, { 0x5831, 0x97 }, { 0x5832, 0xae }, { 0x5833, 0x3f }, + { 0x5834, 0x8e }, { 0x5835, 0x7c }, { 0x5836, 0x7e }, { 0x5837, 0xaf }, + { 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583a, 0x9f }, { 0x583b, 0x7f }, + { 0x583c, 0x5f }, + + /* Y Gamma */ + { 0x5480, 0x07 }, { 0x5481, 0x18 }, { 0x5482, 0x2c }, { 0x5483, 0x4e }, + { 0x5484, 0x5e }, { 0x5485, 0x6b }, { 0x5486, 0x77 }, { 0x5487, 0x82 }, + { 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548a, 0xa4 }, { 0x548b, 0xb1 }, + { 0x548c, 0xc6 }, { 0x548d, 0xd8 }, { 0x548e, 0xe9 }, + + /* UV Gamma */ + { 0x5490, 0x0f }, { 0x5491, 0xff }, { 0x5492, 0x0d }, { 0x5493, 0x05 }, + { 0x5494, 0x07 }, { 0x5495, 0x1a }, { 0x5496, 0x04 }, { 0x5497, 0x01 }, + { 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549a, 0x02 }, { 0x549b, 0xeb }, + { 0x549c, 0x02 }, { 0x549d, 0xa0 }, { 0x549e, 0x02 }, { 0x549f, 0x67 }, + { 0x54a0, 0x02 }, { 0x54a1, 0x3b }, { 0x54a2, 0x02 }, { 0x54a3, 0x18 }, + { 0x54a4, 0x01 }, { 0x54a5, 0xe7 }, { 0x54a6, 0x01 }, { 0x54a7, 0xc3 }, + { 0x54a8, 0x01 }, { 0x54a9, 0x94 }, { 0x54aa, 0x01 }, { 0x54ab, 0x72 }, + { 0x54ac, 0x01 }, { 0x54ad, 0x57 }, + + /* AWB */ + { OV9740_AWB_CTRL00, 0xf0 }, + { OV9740_AWB_CTRL01, 0x00 }, + { OV9740_AWB_CTRL02, 0x41 }, + { OV9740_AWB_CTRL03, 0x42 }, + { OV9740_AWB_ADV_CTRL01, 0x8a }, + { OV9740_AWB_ADV_CTRL02, 0x61 }, + { OV9740_AWB_ADV_CTRL03, 0xce }, + { OV9740_AWB_ADV_CTRL04, 0xa8 }, + { OV9740_AWB_ADV_CTRL05, 0x17 }, + { OV9740_AWB_ADV_CTRL06, 0x1f }, + { OV9740_AWB_ADV_CTRL07, 0x27 }, + { OV9740_AWB_ADV_CTRL08, 0x41 }, + { OV9740_AWB_ADV_CTRL09, 0x34 }, + { OV9740_AWB_ADV_CTRL10, 0xf0 }, + { OV9740_AWB_ADV_CTRL11, 0x10 }, + { OV9740_AWB_CTRL0F, 0xff }, + { OV9740_AWB_CTRL10, 0x00 }, + { OV9740_AWB_CTRL11, 0xff }, + { OV9740_AWB_CTRL12, 0x00 }, + { OV9740_AWB_CTRL13, 0xff }, + { OV9740_AWB_CTRL14, 0x00 }, + + /* CIP */ + { 0x530d, 0x12 }, + + /* CMX */ + { 0x5380, 0x01 }, { 0x5381, 0x00 }, { 0x5382, 0x00 }, { 0x5383, 0x17 }, + { 0x5384, 0x00 }, { 0x5385, 0x01 }, { 0x5386, 0x00 }, { 0x5387, 0x00 }, + { 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538a, 0x00 }, { 0x538b, 0x20 }, + { 0x538c, 0x00 }, { 0x538d, 0x00 }, { 0x538e, 0x00 }, { 0x538f, 0x16 }, + { 0x5390, 0x00 }, { 0x5391, 0x9c }, { 0x5392, 0x00 }, { 0x5393, 0xa0 }, + { 0x5394, 0x18 }, + + /* 50/60 Detection */ + { 0x3c0a, 0x9c }, { 0x3c0b, 0x3f }, + + /* Output Select */ + { OV9740_IO_OUTPUT_SEL01, 0x00 }, + { OV9740_IO_OUTPUT_SEL02, 0x00 }, + { OV9740_IO_CREL00, 0x00 }, + { OV9740_IO_CREL01, 0x00 }, + { OV9740_IO_CREL02, 0x00 }, + + /* AWB Control */ + { OV9740_AWB_MANUAL_CTRL, 0x00 }, + + /* Analog Control */ + { OV9740_ANALOG_CTRL03, 0xaa }, + { OV9740_ANALOG_CTRL32, 0x2f }, + { OV9740_ANALOG_CTRL20, 0x66 }, + { OV9740_ANALOG_CTRL21, 0xc0 }, + { OV9740_ANALOG_CTRL31, 0x52 }, + { OV9740_ANALOG_CTRL33, 0x50 }, + { OV9740_ANALOG_CTRL30, 0xca }, + { OV9740_ANALOG_CTRL04, 0x0c }, + { OV9740_ANALOG_CTRL01, 0x40 }, + { OV9740_ANALOG_CTRL02, 0x16 }, + { OV9740_ANALOG_CTRL10, 0xa1 }, + { OV9740_ANALOG_CTRL12, 0x24 }, + { OV9740_ANALOG_CTRL22, 0x9f }, + { OV9740_ANALOG_CTRL15, 0xf0 }, + + /* Sensor Control */ + { OV9740_SENSOR_CTRL03, 0x42 }, + { OV9740_SENSOR_CTRL04, 0x10 }, + { OV9740_SENSOR_CTRL05, 0x45 }, + { OV9740_SENSOR_CTRL07, 0x14 }, + + /* Timing Control */ + { OV9740_TIMING_CTRL33, 0x04 }, + { OV9740_TIMING_CTRL35, 0x02 }, + { OV9740_TIMING_CTRL19, 0x6e }, + { OV9740_TIMING_CTRL17, 0x94 }, + + /* AEC/AGC Control */ + { OV9740_AEC_ENABLE, 0x10 }, + { OV9740_GAIN_CEILING_01, 0x00 }, + { OV9740_GAIN_CEILING_02, 0x7f }, + { OV9740_AEC_HI_THRESHOLD, 0xa0 }, + { OV9740_AEC_3A1A, 0x05 }, + { OV9740_AEC_CTRL1B_WPT2, 0x50 }, + { OV9740_AEC_CTRL0F_WPT, 0x50 }, + { OV9740_AEC_CTRL10_BPT, 0x4c }, + { OV9740_AEC_CTRL1E_BPT2, 0x4c }, + { OV9740_AEC_LO_THRESHOLD, 0x26 }, + + /* BLC Control */ + { OV9740_BLC_AUTO_ENABLE, 0x45 }, + { OV9740_BLC_MODE, 0x18 }, + + /* DVP Control */ + { OV9740_DVP_VSYNC_CTRL02, 0x04 }, + { OV9740_DVP_VSYNC_MODE, 0x00 }, + { OV9740_DVP_VSYNC_CTRL06, 0x08 }, + + /* PLL Setting */ + { OV9740_PLL_MODE_CTRL01, 0x20 }, + { OV9740_PRE_PLL_CLK_DIV, 0x03 }, + { OV9740_PLL_MULTIPLIER, 0x4c }, + { OV9740_VT_SYS_CLK_DIV, 0x01 }, + { OV9740_VT_PIX_CLK_DIV, 0x08 }, + { OV9740_PLL_CTRL3010, 0x01 }, + { OV9740_VFIFO_CTRL00, 0x82 }, + + /* Timing Setting */ + /* VTS */ + { OV9740_FRM_LENGTH_LN_HI, 0x03 }, + { OV9740_FRM_LENGTH_LN_LO, 0x07 }, + /* HTS */ + { OV9740_LN_LENGTH_PCK_HI, 0x06 }, + { OV9740_LN_LENGTH_PCK_LO, 0x62 }, + + /* MIPI Control */ + { OV9740_MIPI_CTRL00, 0x44 }, /* 0x64 for discontinuous clk */ + { OV9740_MIPI_3837, 0x01 }, + { OV9740_MIPI_CTRL01, 0x0f }, + { OV9740_MIPI_CTRL03, 0x05 }, + { OV9740_MIPI_CTRL05, 0x10 }, + { OV9740_VFIFO_RD_CTRL, 0x16 }, + { OV9740_MIPI_CTRL_3012, 0x70 }, + { OV9740_SC_CMMM_MIPI_CTR, 0x01 }, + + /* YUYV order */ + { OV9740_ISP_CTRL19, 0x02 }, +}; + +static enum v4l2_mbus_pixelcode ov9740_codes[] = { + V4L2_MBUS_FMT_YUYV8_2X8, +}; + +/* read a register */ +static int ov9740_reg_read(struct i2c_client *client, u16 reg, u8 *val) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = 2, + .buf = (u8 *)®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 1, + .buf = val, + }, + }; + + reg = swab16(reg); + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) { + dev_err(&client->dev, "Failed reading register 0x%04x!\n", reg); + return ret; + } + + return 0; +} + +/* write a register */ +static int ov9740_reg_write(struct i2c_client *client, u16 reg, u8 val) +{ + struct i2c_msg msg; + struct { + u16 reg; + u8 val; + } __packed buf; + int ret; + + reg = swab16(reg); + + buf.reg = reg; + buf.val = val; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = 3; + msg.buf = (u8 *)&buf; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + dev_err(&client->dev, "Failed writing register 0x%04x!\n", reg); + return ret; + } + + return 0; +} + + +/* Read a register, alter its bits, write it back */ +static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset) +{ + u8 val; + int ret; + + ret = ov9740_reg_read(client, reg, &val); + if (ret < 0) { + dev_err(&client->dev, + "[Read]-Modify-Write of register 0x%04x failed!\n", + reg); + return ret; + } + + val |= set; + val &= ~unset; + + ret = ov9740_reg_write(client, reg, val); + if (ret < 0) { + dev_err(&client->dev, + "Read-Modify-[Write] of register 0x%04x failed!\n", + reg); + return ret; + } + + return 0; +} + +static int ov9740_reg_write_array(struct i2c_client *client, + const struct ov9740_reg *regarray, + int regarraylen) +{ + int i; + int ret; + + for (i = 0; i < regarraylen; i++) { + ret = ov9740_reg_write(client, + regarray[i].reg, regarray[i].val); + if (ret < 0) + return ret; + } + + return 0; +} + +/* Start/Stop streaming from the device */ +static int ov9740_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov9740_priv *priv = to_ov9740(sd); + int ret; + + /* Program orientation register. */ + if (priv->flag_vflip) + ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x2, 0); + else + ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x2); + if (ret < 0) + return ret; + + if (priv->flag_hflip) + ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x1, 0); + else + ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x1); + if (ret < 0) + return ret; + + if (enable) { + dev_dbg(&client->dev, "Enabling Streaming\n"); + /* Start Streaming */ + ret = ov9740_reg_write(client, OV9740_MODE_SELECT, 0x01); + + } else { + dev_dbg(&client->dev, "Disabling Streaming\n"); + /* Software Reset */ + ret = ov9740_reg_write(client, OV9740_SOFTWARE_RESET, 0x01); + if (!ret) + /* Setting Streaming to Standby */ + ret = ov9740_reg_write(client, OV9740_MODE_SELECT, + 0x00); + } + + priv->current_enable = enable; + + return ret; +} + +/* select nearest higher resolution for capture */ +static void ov9740_res_roundup(u32 *width, u32 *height) +{ + /* Width must be a multiple of 4 pixels. */ + *width = ALIGN(*width, 4); + + /* Max resolution is 1280x720 (720p). */ + if (*width > OV9740_MAX_WIDTH) + *width = OV9740_MAX_WIDTH; + + if (*height > OV9740_MAX_HEIGHT) + *height = OV9740_MAX_HEIGHT; +} + +/* Setup registers according to resolution and color encoding */ +static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height) +{ + u32 x_start; + u32 y_start; + u32 x_end; + u32 y_end; + bool scaling = 0; + u32 scale_input_x; + u32 scale_input_y; + int ret; + + if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT)) + scaling = 1; + + /* + * Try to use as much of the sensor area as possible when supporting + * smaller resolutions. Depending on the aspect ratio of the + * chosen resolution, we can either use the full width of the sensor, + * or the full height of the sensor (or both if the aspect ratio is + * the same as 1280x720. + */ + if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) { + scale_input_x = (OV9740_MAX_HEIGHT * width) / height; + scale_input_y = OV9740_MAX_HEIGHT; + } else { + scale_input_x = OV9740_MAX_WIDTH; + scale_input_y = (OV9740_MAX_WIDTH * height) / width; + } + + /* These describe the area of the sensor to use. */ + x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2; + y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2; + x_end = x_start + scale_input_x - 1; + y_end = y_start + scale_input_y - 1; + + ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff); + if (ret) + goto done; + + ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff); + if (ret) + goto done; + + ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff); + if (ret) + goto done; + + ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff); + if (ret) + goto done; + + ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI, + (scale_input_x - width) >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO, + (scale_input_x - width) & 0xff); + if (ret) + goto done; + + ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef | + (scaling << 4)); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff); + +done: + return ret; +} + +/* set the format we will capture in */ +static int ov9740_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov9740_priv *priv = to_ov9740(sd); + enum v4l2_colorspace cspace; + enum v4l2_mbus_pixelcode code = mf->code; + int ret; + + ov9740_res_roundup(&mf->width, &mf->height); + + switch (code) { + case V4L2_MBUS_FMT_YUYV8_2X8: + cspace = V4L2_COLORSPACE_SRGB; + break; + default: + return -EINVAL; + } + + ret = ov9740_reg_write_array(client, ov9740_defaults, + ARRAY_SIZE(ov9740_defaults)); + if (ret < 0) + return ret; + + ret = ov9740_set_res(client, mf->width, mf->height); + if (ret < 0) + return ret; + + mf->code = code; + mf->colorspace = cspace; + + memcpy(&priv->current_mf, mf, sizeof(struct v4l2_mbus_framefmt)); + + return ret; +} + +static int ov9740_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + ov9740_res_roundup(&mf->width, &mf->height); + + mf->field = V4L2_FIELD_NONE; + mf->code = V4L2_MBUS_FMT_YUYV8_2X8; + mf->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static int ov9740_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(ov9740_codes)) + return -EINVAL; + + *code = ov9740_codes[index]; + + return 0; +} + +static int ov9740_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = OV9740_MAX_WIDTH; + a->bounds.height = OV9740_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + a->c.left = 0; + a->c.top = 0; + a->c.width = OV9740_MAX_WIDTH; + a->c.height = OV9740_MAX_HEIGHT; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +/* Set status of additional camera capabilities */ +static int ov9740_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov9740_priv *priv = + container_of(ctrl->handler, struct ov9740_priv, hdl); + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + priv->flag_vflip = ctrl->val; + break; + case V4L2_CID_HFLIP: + priv->flag_hflip = ctrl->val; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* Get chip identification */ +static int ov9740_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct ov9740_priv *priv = to_ov9740(sd); + + id->ident = priv->ident; + id->revision = priv->revision; + + return 0; +} + +static int ov9740_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct ov9740_priv *priv = to_ov9740(sd); + int ret; + + if (on) { + ret = soc_camera_power_on(&client->dev, ssdd); + if (ret < 0) + return ret; + + if (priv->current_enable) { + ov9740_s_fmt(sd, &priv->current_mf); + ov9740_s_stream(sd, 1); + } + } else { + if (priv->current_enable) { + ov9740_s_stream(sd, 0); + priv->current_enable = true; + } + + soc_camera_power_off(&client->dev, ssdd); + } + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov9740_get_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + u8 val; + + if (reg->reg & ~0xffff) + return -EINVAL; + + reg->size = 2; + + ret = ov9740_reg_read(client, reg->reg, &val); + if (ret) + return ret; + + reg->val = (__u64)val; + + return ret; +} + +static int ov9740_set_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg & ~0xffff || reg->val & ~0xff) + return -EINVAL; + + return ov9740_reg_write(client, reg->reg, reg->val); +} +#endif + +static int ov9740_video_probe(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov9740_priv *priv = to_ov9740(sd); + u8 modelhi, modello; + int ret; + + ret = ov9740_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + + /* + * check and show product ID and manufacturer ID + */ + ret = ov9740_reg_read(client, OV9740_MODEL_ID_HI, &modelhi); + if (ret < 0) + goto done; + + ret = ov9740_reg_read(client, OV9740_MODEL_ID_LO, &modello); + if (ret < 0) + goto done; + + priv->model = (modelhi << 8) | modello; + + ret = ov9740_reg_read(client, OV9740_REVISION_NUMBER, &priv->revision); + if (ret < 0) + goto done; + + ret = ov9740_reg_read(client, OV9740_MANUFACTURER_ID, &priv->manid); + if (ret < 0) + goto done; + + ret = ov9740_reg_read(client, OV9740_SMIA_VERSION, &priv->smiaver); + if (ret < 0) + goto done; + + if (priv->model != 0x9740) { + ret = -ENODEV; + goto done; + } + + priv->ident = V4L2_IDENT_OV9740; + + dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, " + "Manufacturer 0x%02x, SMIA Version 0x%02x\n", + priv->model, priv->revision, priv->manid, priv->smiaver); + + ret = v4l2_ctrl_handler_setup(&priv->hdl); + +done: + ov9740_s_power(&priv->subdev, 0); + return ret; +} + +/* Request bus settings on camera side */ +static int ov9740_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static struct v4l2_subdev_video_ops ov9740_video_ops = { + .s_stream = ov9740_s_stream, + .s_mbus_fmt = ov9740_s_fmt, + .try_mbus_fmt = ov9740_try_fmt, + .enum_mbus_fmt = ov9740_enum_fmt, + .cropcap = ov9740_cropcap, + .g_crop = ov9740_g_crop, + .g_mbus_config = ov9740_g_mbus_config, +}; + +static struct v4l2_subdev_core_ops ov9740_core_ops = { + .g_chip_ident = ov9740_g_chip_ident, + .s_power = ov9740_s_power, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov9740_get_register, + .s_register = ov9740_set_register, +#endif +}; + +static struct v4l2_subdev_ops ov9740_subdev_ops = { + .core = &ov9740_core_ops, + .video = &ov9740_video_ops, +}; + +static const struct v4l2_ctrl_ops ov9740_ctrl_ops = { + .s_ctrl = ov9740_s_ctrl, +}; + +/* + * i2c_driver function + */ +static int ov9740_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov9740_priv *priv; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + int ret; + + if (!ssdd) { + dev_err(&client->dev, "Missing platform_data for driver\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&client->dev, sizeof(struct ov9740_priv), GFP_KERNEL); + if (!priv) { + dev_err(&client->dev, "Failed to allocate private data!\n"); + return -ENOMEM; + } + + v4l2_i2c_subdev_init(&priv->subdev, client, &ov9740_subdev_ops); + v4l2_ctrl_handler_init(&priv->hdl, 13); + v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + priv->subdev.ctrl_handler = &priv->hdl; + if (priv->hdl.error) + return priv->hdl.error; + + ret = ov9740_video_probe(client); + if (ret < 0) + v4l2_ctrl_handler_free(&priv->hdl); + + return ret; +} + +static int ov9740_remove(struct i2c_client *client) +{ + struct ov9740_priv *priv = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(&priv->subdev); + v4l2_ctrl_handler_free(&priv->hdl); + return 0; +} + +static const struct i2c_device_id ov9740_id[] = { + { "ov9740", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov9740_id); + +static struct i2c_driver ov9740_i2c_driver = { + .driver = { + .name = "ov9740", + }, + .probe = ov9740_probe, + .remove = ov9740_remove, + .id_table = ov9740_id, +}; + +module_i2c_driver(ov9740_i2c_driver); + +MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV9740"); +MODULE_AUTHOR("Andrew Chew "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/rj54n1cb0c.c b/drivers/media/i2c/soc_camera/rj54n1cb0c.c new file mode 100644 index 00000000..1f9ec3b0 --- /dev/null +++ b/drivers/media/i2c/soc_camera/rj54n1cb0c.c @@ -0,0 +1,1424 @@ +/* + * Driver for RJ54N1CB0C CMOS Image Sensor from Sharp + * + * Copyright (C) 2009, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define RJ54N1_DEV_CODE 0x0400 +#define RJ54N1_DEV_CODE2 0x0401 +#define RJ54N1_OUT_SEL 0x0403 +#define RJ54N1_XY_OUTPUT_SIZE_S_H 0x0404 +#define RJ54N1_X_OUTPUT_SIZE_S_L 0x0405 +#define RJ54N1_Y_OUTPUT_SIZE_S_L 0x0406 +#define RJ54N1_XY_OUTPUT_SIZE_P_H 0x0407 +#define RJ54N1_X_OUTPUT_SIZE_P_L 0x0408 +#define RJ54N1_Y_OUTPUT_SIZE_P_L 0x0409 +#define RJ54N1_LINE_LENGTH_PCK_S_H 0x040a +#define RJ54N1_LINE_LENGTH_PCK_S_L 0x040b +#define RJ54N1_LINE_LENGTH_PCK_P_H 0x040c +#define RJ54N1_LINE_LENGTH_PCK_P_L 0x040d +#define RJ54N1_RESIZE_N 0x040e +#define RJ54N1_RESIZE_N_STEP 0x040f +#define RJ54N1_RESIZE_STEP 0x0410 +#define RJ54N1_RESIZE_HOLD_H 0x0411 +#define RJ54N1_RESIZE_HOLD_L 0x0412 +#define RJ54N1_H_OBEN_OFS 0x0413 +#define RJ54N1_V_OBEN_OFS 0x0414 +#define RJ54N1_RESIZE_CONTROL 0x0415 +#define RJ54N1_STILL_CONTROL 0x0417 +#define RJ54N1_INC_USE_SEL_H 0x0425 +#define RJ54N1_INC_USE_SEL_L 0x0426 +#define RJ54N1_MIRROR_STILL_MODE 0x0427 +#define RJ54N1_INIT_START 0x0428 +#define RJ54N1_SCALE_1_2_LEV 0x0429 +#define RJ54N1_SCALE_4_LEV 0x042a +#define RJ54N1_Y_GAIN 0x04d8 +#define RJ54N1_APT_GAIN_UP 0x04fa +#define RJ54N1_RA_SEL_UL 0x0530 +#define RJ54N1_BYTE_SWAP 0x0531 +#define RJ54N1_OUT_SIGPO 0x053b +#define RJ54N1_WB_SEL_WEIGHT_I 0x054e +#define RJ54N1_BIT8_WB 0x0569 +#define RJ54N1_HCAPS_WB 0x056a +#define RJ54N1_VCAPS_WB 0x056b +#define RJ54N1_HCAPE_WB 0x056c +#define RJ54N1_VCAPE_WB 0x056d +#define RJ54N1_EXPOSURE_CONTROL 0x058c +#define RJ54N1_FRAME_LENGTH_S_H 0x0595 +#define RJ54N1_FRAME_LENGTH_S_L 0x0596 +#define RJ54N1_FRAME_LENGTH_P_H 0x0597 +#define RJ54N1_FRAME_LENGTH_P_L 0x0598 +#define RJ54N1_PEAK_H 0x05b7 +#define RJ54N1_PEAK_50 0x05b8 +#define RJ54N1_PEAK_60 0x05b9 +#define RJ54N1_PEAK_DIFF 0x05ba +#define RJ54N1_IOC 0x05ef +#define RJ54N1_TG_BYPASS 0x0700 +#define RJ54N1_PLL_L 0x0701 +#define RJ54N1_PLL_N 0x0702 +#define RJ54N1_PLL_EN 0x0704 +#define RJ54N1_RATIO_TG 0x0706 +#define RJ54N1_RATIO_T 0x0707 +#define RJ54N1_RATIO_R 0x0708 +#define RJ54N1_RAMP_TGCLK_EN 0x0709 +#define RJ54N1_OCLK_DSP 0x0710 +#define RJ54N1_RATIO_OP 0x0711 +#define RJ54N1_RATIO_O 0x0712 +#define RJ54N1_OCLK_SEL_EN 0x0713 +#define RJ54N1_CLK_RST 0x0717 +#define RJ54N1_RESET_STANDBY 0x0718 +#define RJ54N1_FWFLG 0x07fe + +#define E_EXCLK (1 << 7) +#define SOFT_STDBY (1 << 4) +#define SEN_RSTX (1 << 2) +#define TG_RSTX (1 << 1) +#define DSP_RSTX (1 << 0) + +#define RESIZE_HOLD_SEL (1 << 2) +#define RESIZE_GO (1 << 1) + +/* + * When cropping, the camera automatically centers the cropped region, there + * doesn't seem to be a way to specify an explicit location of the rectangle. + */ +#define RJ54N1_COLUMN_SKIP 0 +#define RJ54N1_ROW_SKIP 0 +#define RJ54N1_MAX_WIDTH 1600 +#define RJ54N1_MAX_HEIGHT 1200 + +#define PLL_L 2 +#define PLL_N 0x31 + +/* I2C addresses: 0x50, 0x51, 0x60, 0x61 */ + +/* RJ54N1CB0C has only one fixed colorspace per pixelcode */ +struct rj54n1_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +/* Find a data format by a pixel code in an array */ +static const struct rj54n1_datafmt *rj54n1_find_datafmt( + enum v4l2_mbus_pixelcode code, const struct rj54n1_datafmt *fmt, + int n) +{ + int i; + for (i = 0; i < n; i++) + if (fmt[i].code == code) + return fmt + i; + + return NULL; +} + +static const struct rj54n1_datafmt rj54n1_colour_fmts[] = { + {V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, +}; + +struct rj54n1_clock_div { + u8 ratio_tg; /* can be 0 or an odd number */ + u8 ratio_t; + u8 ratio_r; + u8 ratio_op; + u8 ratio_o; +}; + +struct rj54n1 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct rj54n1_clock_div clk_div; + const struct rj54n1_datafmt *fmt; + struct v4l2_rect rect; /* Sensor window */ + unsigned int tgclk_mhz; + bool auto_wb; + unsigned short width; /* Output window */ + unsigned short height; + unsigned short resize; /* Sensor * 1024 / resize = Output */ + unsigned short scale; + u8 bank; +}; + +struct rj54n1_reg_val { + u16 reg; + u8 val; +}; + +static const struct rj54n1_reg_val bank_4[] = { + {0x417, 0}, + {0x42c, 0}, + {0x42d, 0xf0}, + {0x42e, 0}, + {0x42f, 0x50}, + {0x430, 0xf5}, + {0x431, 0x16}, + {0x432, 0x20}, + {0x433, 0}, + {0x434, 0xc8}, + {0x43c, 8}, + {0x43e, 0x90}, + {0x445, 0x83}, + {0x4ba, 0x58}, + {0x4bb, 4}, + {0x4bc, 0x20}, + {0x4db, 4}, + {0x4fe, 2}, +}; + +static const struct rj54n1_reg_val bank_5[] = { + {0x514, 0}, + {0x516, 0}, + {0x518, 0}, + {0x51a, 0}, + {0x51d, 0xff}, + {0x56f, 0x28}, + {0x575, 0x40}, + {0x5bc, 0x48}, + {0x5c1, 6}, + {0x5e5, 0x11}, + {0x5e6, 0x43}, + {0x5e7, 0x33}, + {0x5e8, 0x21}, + {0x5e9, 0x30}, + {0x5ea, 0x0}, + {0x5eb, 0xa5}, + {0x5ec, 0xff}, + {0x5fe, 2}, +}; + +static const struct rj54n1_reg_val bank_7[] = { + {0x70a, 0}, + {0x714, 0xff}, + {0x715, 0xff}, + {0x716, 0x1f}, + {0x7FE, 2}, +}; + +static const struct rj54n1_reg_val bank_8[] = { + {0x800, 0x00}, + {0x801, 0x01}, + {0x802, 0x61}, + {0x805, 0x00}, + {0x806, 0x00}, + {0x807, 0x00}, + {0x808, 0x00}, + {0x809, 0x01}, + {0x80A, 0x61}, + {0x80B, 0x00}, + {0x80C, 0x01}, + {0x80D, 0x00}, + {0x80E, 0x00}, + {0x80F, 0x00}, + {0x810, 0x00}, + {0x811, 0x01}, + {0x812, 0x61}, + {0x813, 0x00}, + {0x814, 0x11}, + {0x815, 0x00}, + {0x816, 0x41}, + {0x817, 0x00}, + {0x818, 0x51}, + {0x819, 0x01}, + {0x81A, 0x1F}, + {0x81B, 0x00}, + {0x81C, 0x01}, + {0x81D, 0x00}, + {0x81E, 0x11}, + {0x81F, 0x00}, + {0x820, 0x41}, + {0x821, 0x00}, + {0x822, 0x51}, + {0x823, 0x00}, + {0x824, 0x00}, + {0x825, 0x00}, + {0x826, 0x47}, + {0x827, 0x01}, + {0x828, 0x4F}, + {0x829, 0x00}, + {0x82A, 0x00}, + {0x82B, 0x00}, + {0x82C, 0x30}, + {0x82D, 0x00}, + {0x82E, 0x40}, + {0x82F, 0x00}, + {0x830, 0xB3}, + {0x831, 0x00}, + {0x832, 0xE3}, + {0x833, 0x00}, + {0x834, 0x00}, + {0x835, 0x00}, + {0x836, 0x00}, + {0x837, 0x00}, + {0x838, 0x00}, + {0x839, 0x01}, + {0x83A, 0x61}, + {0x83B, 0x00}, + {0x83C, 0x01}, + {0x83D, 0x00}, + {0x83E, 0x00}, + {0x83F, 0x00}, + {0x840, 0x00}, + {0x841, 0x01}, + {0x842, 0x61}, + {0x843, 0x00}, + {0x844, 0x1D}, + {0x845, 0x00}, + {0x846, 0x00}, + {0x847, 0x00}, + {0x848, 0x00}, + {0x849, 0x01}, + {0x84A, 0x1F}, + {0x84B, 0x00}, + {0x84C, 0x05}, + {0x84D, 0x00}, + {0x84E, 0x19}, + {0x84F, 0x01}, + {0x850, 0x21}, + {0x851, 0x01}, + {0x852, 0x5D}, + {0x853, 0x00}, + {0x854, 0x00}, + {0x855, 0x00}, + {0x856, 0x19}, + {0x857, 0x01}, + {0x858, 0x21}, + {0x859, 0x00}, + {0x85A, 0x00}, + {0x85B, 0x00}, + {0x85C, 0x00}, + {0x85D, 0x00}, + {0x85E, 0x00}, + {0x85F, 0x00}, + {0x860, 0xB3}, + {0x861, 0x00}, + {0x862, 0xE3}, + {0x863, 0x00}, + {0x864, 0x00}, + {0x865, 0x00}, + {0x866, 0x00}, + {0x867, 0x00}, + {0x868, 0x00}, + {0x869, 0xE2}, + {0x86A, 0x00}, + {0x86B, 0x01}, + {0x86C, 0x06}, + {0x86D, 0x00}, + {0x86E, 0x00}, + {0x86F, 0x00}, + {0x870, 0x60}, + {0x871, 0x8C}, + {0x872, 0x10}, + {0x873, 0x00}, + {0x874, 0xE0}, + {0x875, 0x00}, + {0x876, 0x27}, + {0x877, 0x01}, + {0x878, 0x00}, + {0x879, 0x00}, + {0x87A, 0x00}, + {0x87B, 0x03}, + {0x87C, 0x00}, + {0x87D, 0x00}, + {0x87E, 0x00}, + {0x87F, 0x00}, + {0x880, 0x00}, + {0x881, 0x00}, + {0x882, 0x00}, + {0x883, 0x00}, + {0x884, 0x00}, + {0x885, 0x00}, + {0x886, 0xF8}, + {0x887, 0x00}, + {0x888, 0x03}, + {0x889, 0x00}, + {0x88A, 0x64}, + {0x88B, 0x00}, + {0x88C, 0x03}, + {0x88D, 0x00}, + {0x88E, 0xB1}, + {0x88F, 0x00}, + {0x890, 0x03}, + {0x891, 0x01}, + {0x892, 0x1D}, + {0x893, 0x00}, + {0x894, 0x03}, + {0x895, 0x01}, + {0x896, 0x4B}, + {0x897, 0x00}, + {0x898, 0xE5}, + {0x899, 0x00}, + {0x89A, 0x01}, + {0x89B, 0x00}, + {0x89C, 0x01}, + {0x89D, 0x04}, + {0x89E, 0xC8}, + {0x89F, 0x00}, + {0x8A0, 0x01}, + {0x8A1, 0x01}, + {0x8A2, 0x61}, + {0x8A3, 0x00}, + {0x8A4, 0x01}, + {0x8A5, 0x00}, + {0x8A6, 0x00}, + {0x8A7, 0x00}, + {0x8A8, 0x00}, + {0x8A9, 0x00}, + {0x8AA, 0x7F}, + {0x8AB, 0x03}, + {0x8AC, 0x00}, + {0x8AD, 0x00}, + {0x8AE, 0x00}, + {0x8AF, 0x00}, + {0x8B0, 0x00}, + {0x8B1, 0x00}, + {0x8B6, 0x00}, + {0x8B7, 0x01}, + {0x8B8, 0x00}, + {0x8B9, 0x00}, + {0x8BA, 0x02}, + {0x8BB, 0x00}, + {0x8BC, 0xFF}, + {0x8BD, 0x00}, + {0x8FE, 2}, +}; + +static const struct rj54n1_reg_val bank_10[] = { + {0x10bf, 0x69} +}; + +/* Clock dividers - these are default register values, divider = register + 1 */ +static const struct rj54n1_clock_div clk_div = { + .ratio_tg = 3 /* default: 5 */, + .ratio_t = 4 /* default: 1 */, + .ratio_r = 4 /* default: 0 */, + .ratio_op = 1 /* default: 5 */, + .ratio_o = 9 /* default: 0 */, +}; + +static struct rj54n1 *to_rj54n1(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct rj54n1, subdev); +} + +static int reg_read(struct i2c_client *client, const u16 reg) +{ + struct rj54n1 *rj54n1 = to_rj54n1(client); + int ret; + + /* set bank */ + if (rj54n1->bank != reg >> 8) { + dev_dbg(&client->dev, "[0x%x] = 0x%x\n", 0xff, reg >> 8); + ret = i2c_smbus_write_byte_data(client, 0xff, reg >> 8); + if (ret < 0) + return ret; + rj54n1->bank = reg >> 8; + } + return i2c_smbus_read_byte_data(client, reg & 0xff); +} + +static int reg_write(struct i2c_client *client, const u16 reg, + const u8 data) +{ + struct rj54n1 *rj54n1 = to_rj54n1(client); + int ret; + + /* set bank */ + if (rj54n1->bank != reg >> 8) { + dev_dbg(&client->dev, "[0x%x] = 0x%x\n", 0xff, reg >> 8); + ret = i2c_smbus_write_byte_data(client, 0xff, reg >> 8); + if (ret < 0) + return ret; + rj54n1->bank = reg >> 8; + } + dev_dbg(&client->dev, "[0x%x] = 0x%x\n", reg & 0xff, data); + return i2c_smbus_write_byte_data(client, reg & 0xff, data); +} + +static int reg_set(struct i2c_client *client, const u16 reg, + const u8 data, const u8 mask) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, (ret & ~mask) | (data & mask)); +} + +static int reg_write_multiple(struct i2c_client *client, + const struct rj54n1_reg_val *rv, const int n) +{ + int i, ret; + + for (i = 0; i < n; i++) { + ret = reg_write(client, rv->reg, rv->val); + if (ret < 0) + return ret; + rv++; + } + + return 0; +} + +static int rj54n1_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(rj54n1_colour_fmts)) + return -EINVAL; + + *code = rj54n1_colour_fmts[index].code; + return 0; +} + +static int rj54n1_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* Switch between preview and still shot modes */ + return reg_set(client, RJ54N1_STILL_CONTROL, (!enable) << 7, 0x80); +} + +static int rj54n1_set_rect(struct i2c_client *client, + u16 reg_x, u16 reg_y, u16 reg_xy, + u32 width, u32 height) +{ + int ret; + + ret = reg_write(client, reg_xy, + ((width >> 4) & 0x70) | + ((height >> 8) & 7)); + + if (!ret) + ret = reg_write(client, reg_x, width & 0xff); + if (!ret) + ret = reg_write(client, reg_y, height & 0xff); + + return ret; +} + +/* + * Some commands, specifically certain initialisation sequences, require + * a commit operation. + */ +static int rj54n1_commit(struct i2c_client *client) +{ + int ret = reg_write(client, RJ54N1_INIT_START, 1); + msleep(10); + if (!ret) + ret = reg_write(client, RJ54N1_INIT_START, 0); + return ret; +} + +static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h, + s32 *out_w, s32 *out_h); + +static int rj54n1_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct rj54n1 *rj54n1 = to_rj54n1(client); + const struct v4l2_rect *rect = &a->c; + int dummy = 0, output_w, output_h, + input_w = rect->width, input_h = rect->height; + int ret; + + /* arbitrary minimum width and height, edges unimportant */ + soc_camera_limit_side(&dummy, &input_w, + RJ54N1_COLUMN_SKIP, 8, RJ54N1_MAX_WIDTH); + + soc_camera_limit_side(&dummy, &input_h, + RJ54N1_ROW_SKIP, 8, RJ54N1_MAX_HEIGHT); + + output_w = (input_w * 1024 + rj54n1->resize / 2) / rj54n1->resize; + output_h = (input_h * 1024 + rj54n1->resize / 2) / rj54n1->resize; + + dev_dbg(&client->dev, "Scaling for %dx%d : %u = %dx%d\n", + input_w, input_h, rj54n1->resize, output_w, output_h); + + ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h); + if (ret < 0) + return ret; + + rj54n1->width = output_w; + rj54n1->height = output_h; + rj54n1->resize = ret; + rj54n1->rect.width = input_w; + rj54n1->rect.height = input_h; + + return 0; +} + +static int rj54n1_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct rj54n1 *rj54n1 = to_rj54n1(client); + + a->c = rj54n1->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int rj54n1_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = RJ54N1_COLUMN_SKIP; + a->bounds.top = RJ54N1_ROW_SKIP; + a->bounds.width = RJ54N1_MAX_WIDTH; + a->bounds.height = RJ54N1_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int rj54n1_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct rj54n1 *rj54n1 = to_rj54n1(client); + + mf->code = rj54n1->fmt->code; + mf->colorspace = rj54n1->fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + mf->width = rj54n1->width; + mf->height = rj54n1->height; + + return 0; +} + +/* + * The actual geometry configuration routine. It scales the input window into + * the output one, updates the window sizes and returns an error or the resize + * coefficient on success. Note: we only use the "Fixed Scaling" on this camera. + */ +static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h, + s32 *out_w, s32 *out_h) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct rj54n1 *rj54n1 = to_rj54n1(client); + unsigned int skip, resize, input_w = *in_w, input_h = *in_h, + output_w = *out_w, output_h = *out_h; + u16 inc_sel, wb_bit8, wb_left, wb_right, wb_top, wb_bottom; + unsigned int peak, peak_50, peak_60; + int ret; + + /* + * We have a problem with crops, where the window is larger than 512x384 + * and output window is larger than a half of the input one. In this + * case we have to either reduce the input window to equal or below + * 512x384 or the output window to equal or below 1/2 of the input. + */ + if (output_w > max(512U, input_w / 2)) { + if (2 * output_w > RJ54N1_MAX_WIDTH) { + input_w = RJ54N1_MAX_WIDTH; + output_w = RJ54N1_MAX_WIDTH / 2; + } else { + input_w = output_w * 2; + } + + dev_dbg(&client->dev, "Adjusted output width: in %u, out %u\n", + input_w, output_w); + } + + if (output_h > max(384U, input_h / 2)) { + if (2 * output_h > RJ54N1_MAX_HEIGHT) { + input_h = RJ54N1_MAX_HEIGHT; + output_h = RJ54N1_MAX_HEIGHT / 2; + } else { + input_h = output_h * 2; + } + + dev_dbg(&client->dev, "Adjusted output height: in %u, out %u\n", + input_h, output_h); + } + + /* Idea: use the read mode for snapshots, handle separate geometries */ + ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_S_L, + RJ54N1_Y_OUTPUT_SIZE_S_L, + RJ54N1_XY_OUTPUT_SIZE_S_H, output_w, output_h); + if (!ret) + ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_P_L, + RJ54N1_Y_OUTPUT_SIZE_P_L, + RJ54N1_XY_OUTPUT_SIZE_P_H, output_w, output_h); + + if (ret < 0) + return ret; + + if (output_w > input_w && output_h > input_h) { + input_w = output_w; + input_h = output_h; + + resize = 1024; + } else { + unsigned int resize_x, resize_y; + resize_x = (input_w * 1024 + output_w / 2) / output_w; + resize_y = (input_h * 1024 + output_h / 2) / output_h; + + /* We want max(resize_x, resize_y), check if it still fits */ + if (resize_x > resize_y && + (output_h * resize_x + 512) / 1024 > RJ54N1_MAX_HEIGHT) + resize = (RJ54N1_MAX_HEIGHT * 1024 + output_h / 2) / + output_h; + else if (resize_y > resize_x && + (output_w * resize_y + 512) / 1024 > RJ54N1_MAX_WIDTH) + resize = (RJ54N1_MAX_WIDTH * 1024 + output_w / 2) / + output_w; + else + resize = max(resize_x, resize_y); + + /* Prohibited value ranges */ + switch (resize) { + case 2040 ... 2047: + resize = 2039; + break; + case 4080 ... 4095: + resize = 4079; + break; + case 8160 ... 8191: + resize = 8159; + break; + case 16320 ... 16384: + resize = 16319; + } + } + + /* Set scaling */ + ret = reg_write(client, RJ54N1_RESIZE_HOLD_L, resize & 0xff); + if (!ret) + ret = reg_write(client, RJ54N1_RESIZE_HOLD_H, resize >> 8); + + if (ret < 0) + return ret; + + /* + * Configure a skipping bitmask. The sensor will select a skipping value + * among set bits automatically. This is very unclear in the datasheet + * too. I was told, in this register one enables all skipping values, + * that are required for a specific resize, and the camera selects + * automatically, which ones to use. But it is unclear how to identify, + * which cropping values are needed. Secondly, why don't we just set all + * bits and let the camera choose? Would it increase processing time and + * reduce the framerate? Using 0xfffc for INC_USE_SEL doesn't seem to + * improve the image quality or stability for larger frames (see comment + * above), but I didn't check the framerate. + */ + skip = min(resize / 1024, 15U); + + inc_sel = 1 << skip; + + if (inc_sel <= 2) + inc_sel = 0xc; + else if (resize & 1023 && skip < 15) + inc_sel |= 1 << (skip + 1); + + ret = reg_write(client, RJ54N1_INC_USE_SEL_L, inc_sel & 0xfc); + if (!ret) + ret = reg_write(client, RJ54N1_INC_USE_SEL_H, inc_sel >> 8); + + if (!rj54n1->auto_wb) { + /* Auto white balance window */ + wb_left = output_w / 16; + wb_right = (3 * output_w / 4 - 3) / 4; + wb_top = output_h / 16; + wb_bottom = (3 * output_h / 4 - 3) / 4; + wb_bit8 = ((wb_left >> 2) & 0x40) | ((wb_top >> 4) & 0x10) | + ((wb_right >> 6) & 4) | ((wb_bottom >> 8) & 1); + + if (!ret) + ret = reg_write(client, RJ54N1_BIT8_WB, wb_bit8); + if (!ret) + ret = reg_write(client, RJ54N1_HCAPS_WB, wb_left); + if (!ret) + ret = reg_write(client, RJ54N1_VCAPS_WB, wb_top); + if (!ret) + ret = reg_write(client, RJ54N1_HCAPE_WB, wb_right); + if (!ret) + ret = reg_write(client, RJ54N1_VCAPE_WB, wb_bottom); + } + + /* Antiflicker */ + peak = 12 * RJ54N1_MAX_WIDTH * (1 << 14) * resize / rj54n1->tgclk_mhz / + 10000; + peak_50 = peak / 6; + peak_60 = peak / 5; + + if (!ret) + ret = reg_write(client, RJ54N1_PEAK_H, + ((peak_50 >> 4) & 0xf0) | (peak_60 >> 8)); + if (!ret) + ret = reg_write(client, RJ54N1_PEAK_50, peak_50); + if (!ret) + ret = reg_write(client, RJ54N1_PEAK_60, peak_60); + if (!ret) + ret = reg_write(client, RJ54N1_PEAK_DIFF, peak / 150); + + /* Start resizing */ + if (!ret) + ret = reg_write(client, RJ54N1_RESIZE_CONTROL, + RESIZE_HOLD_SEL | RESIZE_GO | 1); + + if (ret < 0) + return ret; + + /* Constant taken from manufacturer's example */ + msleep(230); + + ret = reg_write(client, RJ54N1_RESIZE_CONTROL, RESIZE_HOLD_SEL | 1); + if (ret < 0) + return ret; + + *in_w = (output_w * resize + 512) / 1024; + *in_h = (output_h * resize + 512) / 1024; + *out_w = output_w; + *out_h = output_h; + + dev_dbg(&client->dev, "Scaled for %dx%d : %u = %ux%u, skip %u\n", + *in_w, *in_h, resize, output_w, output_h, skip); + + return resize; +} + +static int rj54n1_set_clock(struct i2c_client *client) +{ + struct rj54n1 *rj54n1 = to_rj54n1(client); + int ret; + + /* Enable external clock */ + ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK | SOFT_STDBY); + /* Leave stand-by. Note: use this when implementing suspend / resume */ + if (!ret) + ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK); + + if (!ret) + ret = reg_write(client, RJ54N1_PLL_L, PLL_L); + if (!ret) + ret = reg_write(client, RJ54N1_PLL_N, PLL_N); + + /* TGCLK dividers */ + if (!ret) + ret = reg_write(client, RJ54N1_RATIO_TG, + rj54n1->clk_div.ratio_tg); + if (!ret) + ret = reg_write(client, RJ54N1_RATIO_T, + rj54n1->clk_div.ratio_t); + if (!ret) + ret = reg_write(client, RJ54N1_RATIO_R, + rj54n1->clk_div.ratio_r); + + /* Enable TGCLK & RAMP */ + if (!ret) + ret = reg_write(client, RJ54N1_RAMP_TGCLK_EN, 3); + + /* Disable clock output */ + if (!ret) + ret = reg_write(client, RJ54N1_OCLK_DSP, 0); + + /* Set divisors */ + if (!ret) + ret = reg_write(client, RJ54N1_RATIO_OP, + rj54n1->clk_div.ratio_op); + if (!ret) + ret = reg_write(client, RJ54N1_RATIO_O, + rj54n1->clk_div.ratio_o); + + /* Enable OCLK */ + if (!ret) + ret = reg_write(client, RJ54N1_OCLK_SEL_EN, 1); + + /* Use PLL for Timing Generator, write 2 to reserved bits */ + if (!ret) + ret = reg_write(client, RJ54N1_TG_BYPASS, 2); + + /* Take sensor out of reset */ + if (!ret) + ret = reg_write(client, RJ54N1_RESET_STANDBY, + E_EXCLK | SEN_RSTX); + /* Enable PLL */ + if (!ret) + ret = reg_write(client, RJ54N1_PLL_EN, 1); + + /* Wait for PLL to stabilise */ + msleep(10); + + /* Enable clock to frequency divider */ + if (!ret) + ret = reg_write(client, RJ54N1_CLK_RST, 1); + + if (!ret) + ret = reg_read(client, RJ54N1_CLK_RST); + if (ret != 1) { + dev_err(&client->dev, + "Resetting RJ54N1CB0C clock failed: %d!\n", ret); + return -EIO; + } + + /* Start the PLL */ + ret = reg_set(client, RJ54N1_OCLK_DSP, 1, 1); + + /* Enable OCLK */ + if (!ret) + ret = reg_write(client, RJ54N1_OCLK_SEL_EN, 1); + + return ret; +} + +static int rj54n1_reg_init(struct i2c_client *client) +{ + struct rj54n1 *rj54n1 = to_rj54n1(client); + int ret = rj54n1_set_clock(client); + + if (!ret) + ret = reg_write_multiple(client, bank_7, ARRAY_SIZE(bank_7)); + if (!ret) + ret = reg_write_multiple(client, bank_10, ARRAY_SIZE(bank_10)); + + /* Set binning divisors */ + if (!ret) + ret = reg_write(client, RJ54N1_SCALE_1_2_LEV, 3 | (7 << 4)); + if (!ret) + ret = reg_write(client, RJ54N1_SCALE_4_LEV, 0xf); + + /* Switch to fixed resize mode */ + if (!ret) + ret = reg_write(client, RJ54N1_RESIZE_CONTROL, + RESIZE_HOLD_SEL | 1); + + /* Set gain */ + if (!ret) + ret = reg_write(client, RJ54N1_Y_GAIN, 0x84); + + /* + * Mirror the image back: default is upside down and left-to-right... + * Set manual preview / still shot switching + */ + if (!ret) + ret = reg_write(client, RJ54N1_MIRROR_STILL_MODE, 0x27); + + if (!ret) + ret = reg_write_multiple(client, bank_4, ARRAY_SIZE(bank_4)); + + /* Auto exposure area */ + if (!ret) + ret = reg_write(client, RJ54N1_EXPOSURE_CONTROL, 0x80); + /* Check current auto WB config */ + if (!ret) + ret = reg_read(client, RJ54N1_WB_SEL_WEIGHT_I); + if (ret >= 0) { + rj54n1->auto_wb = ret & 0x80; + ret = reg_write_multiple(client, bank_5, ARRAY_SIZE(bank_5)); + } + if (!ret) + ret = reg_write_multiple(client, bank_8, ARRAY_SIZE(bank_8)); + + if (!ret) + ret = reg_write(client, RJ54N1_RESET_STANDBY, + E_EXCLK | DSP_RSTX | SEN_RSTX); + + /* Commit init */ + if (!ret) + ret = rj54n1_commit(client); + + /* Take DSP, TG, sensor out of reset */ + if (!ret) + ret = reg_write(client, RJ54N1_RESET_STANDBY, + E_EXCLK | DSP_RSTX | TG_RSTX | SEN_RSTX); + + /* Start register update? Same register as 0x?FE in many bank_* sets */ + if (!ret) + ret = reg_write(client, RJ54N1_FWFLG, 2); + + /* Constant taken from manufacturer's example */ + msleep(700); + + return ret; +} + +static int rj54n1_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct rj54n1 *rj54n1 = to_rj54n1(client); + const struct rj54n1_datafmt *fmt; + int align = mf->code == V4L2_MBUS_FMT_SBGGR10_1X10 || + mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE || + mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE || + mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE || + mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE; + + dev_dbg(&client->dev, "%s: code = %d, width = %u, height = %u\n", + __func__, mf->code, mf->width, mf->height); + + fmt = rj54n1_find_datafmt(mf->code, rj54n1_colour_fmts, + ARRAY_SIZE(rj54n1_colour_fmts)); + if (!fmt) { + fmt = rj54n1->fmt; + mf->code = fmt->code; + } + + mf->field = V4L2_FIELD_NONE; + mf->colorspace = fmt->colorspace; + + v4l_bound_align_image(&mf->width, 112, RJ54N1_MAX_WIDTH, align, + &mf->height, 84, RJ54N1_MAX_HEIGHT, align, 0); + + return 0; +} + +static int rj54n1_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct rj54n1 *rj54n1 = to_rj54n1(client); + const struct rj54n1_datafmt *fmt; + int output_w, output_h, max_w, max_h, + input_w = rj54n1->rect.width, input_h = rj54n1->rect.height; + int ret; + + /* + * The host driver can call us without .try_fmt(), so, we have to take + * care ourseleves + */ + rj54n1_try_fmt(sd, mf); + + /* + * Verify if the sensor has just been powered on. TODO: replace this + * with proper PM, when a suitable API is available. + */ + ret = reg_read(client, RJ54N1_RESET_STANDBY); + if (ret < 0) + return ret; + + if (!(ret & E_EXCLK)) { + ret = rj54n1_reg_init(client); + if (ret < 0) + return ret; + } + + dev_dbg(&client->dev, "%s: code = %d, width = %u, height = %u\n", + __func__, mf->code, mf->width, mf->height); + + /* RA_SEL_UL is only relevant for raw modes, ignored otherwise. */ + switch (mf->code) { + case V4L2_MBUS_FMT_YUYV8_2X8: + ret = reg_write(client, RJ54N1_OUT_SEL, 0); + if (!ret) + ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8); + break; + case V4L2_MBUS_FMT_YVYU8_2X8: + ret = reg_write(client, RJ54N1_OUT_SEL, 0); + if (!ret) + ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8); + break; + case V4L2_MBUS_FMT_RGB565_2X8_LE: + ret = reg_write(client, RJ54N1_OUT_SEL, 0x11); + if (!ret) + ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8); + break; + case V4L2_MBUS_FMT_RGB565_2X8_BE: + ret = reg_write(client, RJ54N1_OUT_SEL, 0x11); + if (!ret) + ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8); + break; + case V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE: + ret = reg_write(client, RJ54N1_OUT_SEL, 4); + if (!ret) + ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8); + if (!ret) + ret = reg_write(client, RJ54N1_RA_SEL_UL, 0); + break; + case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE: + ret = reg_write(client, RJ54N1_OUT_SEL, 4); + if (!ret) + ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8); + if (!ret) + ret = reg_write(client, RJ54N1_RA_SEL_UL, 8); + break; + case V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE: + ret = reg_write(client, RJ54N1_OUT_SEL, 4); + if (!ret) + ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8); + if (!ret) + ret = reg_write(client, RJ54N1_RA_SEL_UL, 0); + break; + case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE: + ret = reg_write(client, RJ54N1_OUT_SEL, 4); + if (!ret) + ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8); + if (!ret) + ret = reg_write(client, RJ54N1_RA_SEL_UL, 8); + break; + case V4L2_MBUS_FMT_SBGGR10_1X10: + ret = reg_write(client, RJ54N1_OUT_SEL, 5); + break; + default: + ret = -EINVAL; + } + + /* Special case: a raw mode with 10 bits of data per clock tick */ + if (!ret) + ret = reg_set(client, RJ54N1_OCLK_SEL_EN, + (mf->code == V4L2_MBUS_FMT_SBGGR10_1X10) << 1, 2); + + if (ret < 0) + return ret; + + /* Supported scales 1:1 >= scale > 1:16 */ + max_w = mf->width * (16 * 1024 - 1) / 1024; + if (input_w > max_w) + input_w = max_w; + max_h = mf->height * (16 * 1024 - 1) / 1024; + if (input_h > max_h) + input_h = max_h; + + output_w = mf->width; + output_h = mf->height; + + ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h); + if (ret < 0) + return ret; + + fmt = rj54n1_find_datafmt(mf->code, rj54n1_colour_fmts, + ARRAY_SIZE(rj54n1_colour_fmts)); + + rj54n1->fmt = fmt; + rj54n1->resize = ret; + rj54n1->rect.width = input_w; + rj54n1->rect.height = input_h; + rj54n1->width = output_w; + rj54n1->height = output_h; + + mf->width = output_w; + mf->height = output_h; + mf->field = V4L2_FIELD_NONE; + mf->colorspace = fmt->colorspace; + + return 0; +} + +static int rj54n1_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = V4L2_IDENT_RJ54N1CB0C; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int rj54n1_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || + reg->reg < 0x400 || reg->reg > 0x1fff) + /* Registers > 0x0800 are only available from Sharp support */ + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + reg->size = 1; + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xff) + return -EIO; + + return 0; +} + +static int rj54n1_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || + reg->reg < 0x400 || reg->reg > 0x1fff) + /* Registers >= 0x0800 are only available from Sharp support */ + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int rj54n1_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +static int rj54n1_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct rj54n1 *rj54n1 = container_of(ctrl->handler, struct rj54n1, hdl); + struct v4l2_subdev *sd = &rj54n1->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->val) + data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 1); + else + data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 1, 1); + if (data < 0) + return -EIO; + return 0; + case V4L2_CID_HFLIP: + if (ctrl->val) + data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 2); + else + data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 2, 2); + if (data < 0) + return -EIO; + return 0; + case V4L2_CID_GAIN: + if (reg_write(client, RJ54N1_Y_GAIN, ctrl->val * 2) < 0) + return -EIO; + return 0; + case V4L2_CID_AUTO_WHITE_BALANCE: + /* Auto WB area - whole image */ + if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->val << 7, + 0x80) < 0) + return -EIO; + rj54n1->auto_wb = ctrl->val; + return 0; + } + + return -EINVAL; +} + +static const struct v4l2_ctrl_ops rj54n1_ctrl_ops = { + .s_ctrl = rj54n1_s_ctrl, +}; + +static struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = { + .g_chip_ident = rj54n1_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = rj54n1_g_register, + .s_register = rj54n1_s_register, +#endif + .s_power = rj54n1_s_power, +}; + +static int rj54n1_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = + V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static int rj54n1_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + /* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */ + if (soc_camera_apply_board_flags(ssdd, cfg) & + V4L2_MBUS_PCLK_SAMPLE_RISING) + return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4); + else + return reg_write(client, RJ54N1_OUT_SIGPO, 0); +} + +static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = { + .s_stream = rj54n1_s_stream, + .s_mbus_fmt = rj54n1_s_fmt, + .g_mbus_fmt = rj54n1_g_fmt, + .try_mbus_fmt = rj54n1_try_fmt, + .enum_mbus_fmt = rj54n1_enum_fmt, + .g_crop = rj54n1_g_crop, + .s_crop = rj54n1_s_crop, + .cropcap = rj54n1_cropcap, + .g_mbus_config = rj54n1_g_mbus_config, + .s_mbus_config = rj54n1_s_mbus_config, +}; + +static struct v4l2_subdev_ops rj54n1_subdev_ops = { + .core = &rj54n1_subdev_core_ops, + .video = &rj54n1_subdev_video_ops, +}; + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int rj54n1_video_probe(struct i2c_client *client, + struct rj54n1_pdata *priv) +{ + struct rj54n1 *rj54n1 = to_rj54n1(client); + int data1, data2; + int ret; + + ret = rj54n1_s_power(&rj54n1->subdev, 1); + if (ret < 0) + return ret; + + /* Read out the chip version register */ + data1 = reg_read(client, RJ54N1_DEV_CODE); + data2 = reg_read(client, RJ54N1_DEV_CODE2); + + if (data1 != 0x51 || data2 != 0x10) { + ret = -ENODEV; + dev_info(&client->dev, "No RJ54N1CB0C found, read 0x%x:0x%x\n", + data1, data2); + goto done; + } + + /* Configure IOCTL polarity from the platform data: 0 or 1 << 7. */ + ret = reg_write(client, RJ54N1_IOC, priv->ioctl_high << 7); + if (ret < 0) + goto done; + + dev_info(&client->dev, "Detected a RJ54N1CB0C chip ID 0x%x:0x%x\n", + data1, data2); + + ret = v4l2_ctrl_handler_setup(&rj54n1->hdl); + +done: + rj54n1_s_power(&rj54n1->subdev, 0); + return ret; +} + +static int rj54n1_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct rj54n1 *rj54n1; + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct rj54n1_pdata *rj54n1_priv; + int ret; + + if (!ssdd || !ssdd->drv_priv) { + dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n"); + return -EINVAL; + } + + rj54n1_priv = ssdd->drv_priv; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n"); + return -EIO; + } + + rj54n1 = devm_kzalloc(&client->dev, sizeof(struct rj54n1), GFP_KERNEL); + if (!rj54n1) + return -ENOMEM; + + v4l2_i2c_subdev_init(&rj54n1->subdev, client, &rj54n1_subdev_ops); + v4l2_ctrl_handler_init(&rj54n1->hdl, 4); + v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 66); + v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops, + V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); + rj54n1->subdev.ctrl_handler = &rj54n1->hdl; + if (rj54n1->hdl.error) + return rj54n1->hdl.error; + + rj54n1->clk_div = clk_div; + rj54n1->rect.left = RJ54N1_COLUMN_SKIP; + rj54n1->rect.top = RJ54N1_ROW_SKIP; + rj54n1->rect.width = RJ54N1_MAX_WIDTH; + rj54n1->rect.height = RJ54N1_MAX_HEIGHT; + rj54n1->width = RJ54N1_MAX_WIDTH; + rj54n1->height = RJ54N1_MAX_HEIGHT; + rj54n1->fmt = &rj54n1_colour_fmts[0]; + rj54n1->resize = 1024; + rj54n1->tgclk_mhz = (rj54n1_priv->mclk_freq / PLL_L * PLL_N) / + (clk_div.ratio_tg + 1) / (clk_div.ratio_t + 1); + + ret = rj54n1_video_probe(client, rj54n1_priv); + if (ret < 0) + v4l2_ctrl_handler_free(&rj54n1->hdl); + + return ret; +} + +static int rj54n1_remove(struct i2c_client *client) +{ + struct rj54n1 *rj54n1 = to_rj54n1(client); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + v4l2_device_unregister_subdev(&rj54n1->subdev); + if (ssdd->free_bus) + ssdd->free_bus(ssdd); + v4l2_ctrl_handler_free(&rj54n1->hdl); + + return 0; +} + +static const struct i2c_device_id rj54n1_id[] = { + { "rj54n1cb0c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rj54n1_id); + +static struct i2c_driver rj54n1_i2c_driver = { + .driver = { + .name = "rj54n1cb0c", + }, + .probe = rj54n1_probe, + .remove = rj54n1_remove, + .id_table = rj54n1_id, +}; + +module_i2c_driver(rj54n1_i2c_driver); + +MODULE_DESCRIPTION("Sharp RJ54N1CB0C Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/soc_camera/tw9910.c b/drivers/media/i2c/soc_camera/tw9910.c new file mode 100644 index 00000000..bad90b16 --- /dev/null +++ b/drivers/media/i2c/soc_camera/tw9910.c @@ -0,0 +1,965 @@ +/* + * tw9910 Video Driver + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on ov772x driver, + * + * Copyright (C) 2008 Kuninori Morimoto + * Copyright 2006-7 Jonathan Corbet + * Copyright (C) 2008 Magnus Damm + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define GET_ID(val) ((val & 0xF8) >> 3) +#define GET_REV(val) (val & 0x07) + +/* + * register offset + */ +#define ID 0x00 /* Product ID Code Register */ +#define STATUS1 0x01 /* Chip Status Register I */ +#define INFORM 0x02 /* Input Format */ +#define OPFORM 0x03 /* Output Format Control Register */ +#define DLYCTR 0x04 /* Hysteresis and HSYNC Delay Control */ +#define OUTCTR1 0x05 /* Output Control I */ +#define ACNTL1 0x06 /* Analog Control Register 1 */ +#define CROP_HI 0x07 /* Cropping Register, High */ +#define VDELAY_LO 0x08 /* Vertical Delay Register, Low */ +#define VACTIVE_LO 0x09 /* Vertical Active Register, Low */ +#define HDELAY_LO 0x0A /* Horizontal Delay Register, Low */ +#define HACTIVE_LO 0x0B /* Horizontal Active Register, Low */ +#define CNTRL1 0x0C /* Control Register I */ +#define VSCALE_LO 0x0D /* Vertical Scaling Register, Low */ +#define SCALE_HI 0x0E /* Scaling Register, High */ +#define HSCALE_LO 0x0F /* Horizontal Scaling Register, Low */ +#define BRIGHT 0x10 /* BRIGHTNESS Control Register */ +#define CONTRAST 0x11 /* CONTRAST Control Register */ +#define SHARPNESS 0x12 /* SHARPNESS Control Register I */ +#define SAT_U 0x13 /* Chroma (U) Gain Register */ +#define SAT_V 0x14 /* Chroma (V) Gain Register */ +#define HUE 0x15 /* Hue Control Register */ +#define CORING1 0x17 +#define CORING2 0x18 /* Coring and IF compensation */ +#define VBICNTL 0x19 /* VBI Control Register */ +#define ACNTL2 0x1A /* Analog Control 2 */ +#define OUTCTR2 0x1B /* Output Control 2 */ +#define SDT 0x1C /* Standard Selection */ +#define SDTR 0x1D /* Standard Recognition */ +#define TEST 0x1F /* Test Control Register */ +#define CLMPG 0x20 /* Clamping Gain */ +#define IAGC 0x21 /* Individual AGC Gain */ +#define AGCGAIN 0x22 /* AGC Gain */ +#define PEAKWT 0x23 /* White Peak Threshold */ +#define CLMPL 0x24 /* Clamp level */ +#define SYNCT 0x25 /* Sync Amplitude */ +#define MISSCNT 0x26 /* Sync Miss Count Register */ +#define PCLAMP 0x27 /* Clamp Position Register */ +#define VCNTL1 0x28 /* Vertical Control I */ +#define VCNTL2 0x29 /* Vertical Control II */ +#define CKILL 0x2A /* Color Killer Level Control */ +#define COMB 0x2B /* Comb Filter Control */ +#define LDLY 0x2C /* Luma Delay and H Filter Control */ +#define MISC1 0x2D /* Miscellaneous Control I */ +#define LOOP 0x2E /* LOOP Control Register */ +#define MISC2 0x2F /* Miscellaneous Control II */ +#define MVSN 0x30 /* Macrovision Detection */ +#define STATUS2 0x31 /* Chip STATUS II */ +#define HFREF 0x32 /* H monitor */ +#define CLMD 0x33 /* CLAMP MODE */ +#define IDCNTL 0x34 /* ID Detection Control */ +#define CLCNTL1 0x35 /* Clamp Control I */ +#define ANAPLLCTL 0x4C +#define VBIMIN 0x4D +#define HSLOWCTL 0x4E +#define WSS3 0x4F +#define FILLDATA 0x50 +#define SDID 0x51 +#define DID 0x52 +#define WSS1 0x53 +#define WSS2 0x54 +#define VVBI 0x55 +#define LCTL6 0x56 +#define LCTL7 0x57 +#define LCTL8 0x58 +#define LCTL9 0x59 +#define LCTL10 0x5A +#define LCTL11 0x5B +#define LCTL12 0x5C +#define LCTL13 0x5D +#define LCTL14 0x5E +#define LCTL15 0x5F +#define LCTL16 0x60 +#define LCTL17 0x61 +#define LCTL18 0x62 +#define LCTL19 0x63 +#define LCTL20 0x64 +#define LCTL21 0x65 +#define LCTL22 0x66 +#define LCTL23 0x67 +#define LCTL24 0x68 +#define LCTL25 0x69 +#define LCTL26 0x6A +#define HSBEGIN 0x6B +#define HSEND 0x6C +#define OVSDLY 0x6D +#define OVSEND 0x6E +#define VBIDELAY 0x6F + +/* + * register detail + */ + +/* INFORM */ +#define FC27_ON 0x40 /* 1 : Input crystal clock frequency is 27MHz */ +#define FC27_FF 0x00 /* 0 : Square pixel mode. */ + /* Must use 24.54MHz for 60Hz field rate */ + /* source or 29.5MHz for 50Hz field rate */ +#define IFSEL_S 0x10 /* 01 : S-video decoding */ +#define IFSEL_C 0x00 /* 00 : Composite video decoding */ + /* Y input video selection */ +#define YSEL_M0 0x00 /* 00 : Mux0 selected */ +#define YSEL_M1 0x04 /* 01 : Mux1 selected */ +#define YSEL_M2 0x08 /* 10 : Mux2 selected */ +#define YSEL_M3 0x10 /* 11 : Mux3 selected */ + +/* OPFORM */ +#define MODE 0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */ + /* 1 : ITU-R-656 compatible data sequence format */ +#define LEN 0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */ + /* 1 : 16-bit YCrCb 4:2:2 output format.*/ +#define LLCMODE 0x20 /* 1 : LLC output mode. */ + /* 0 : free-run output mode */ +#define AINC 0x10 /* Serial interface auto-indexing control */ + /* 0 : auto-increment */ + /* 1 : non-auto */ +#define VSCTL 0x08 /* 1 : Vertical out ctrl by DVALID */ + /* 0 : Vertical out ctrl by HACTIVE and DVALID */ +#define OEN_TRI_SEL_MASK 0x07 +#define OEN_TRI_SEL_ALL_ON 0x00 /* Enable output for Rev0/Rev1 */ +#define OEN_TRI_SEL_ALL_OFF_r0 0x06 /* All tri-stated for Rev0 */ +#define OEN_TRI_SEL_ALL_OFF_r1 0x07 /* All tri-stated for Rev1 */ + +/* OUTCTR1 */ +#define VSP_LO 0x00 /* 0 : VS pin output polarity is active low */ +#define VSP_HI 0x80 /* 1 : VS pin output polarity is active high. */ + /* VS pin output control */ +#define VSSL_VSYNC 0x00 /* 0 : VSYNC */ +#define VSSL_VACT 0x10 /* 1 : VACT */ +#define VSSL_FIELD 0x20 /* 2 : FIELD */ +#define VSSL_VVALID 0x30 /* 3 : VVALID */ +#define VSSL_ZERO 0x70 /* 7 : 0 */ +#define HSP_LOW 0x00 /* 0 : HS pin output polarity is active low */ +#define HSP_HI 0x08 /* 1 : HS pin output polarity is active high.*/ + /* HS pin output control */ +#define HSSL_HACT 0x00 /* 0 : HACT */ +#define HSSL_HSYNC 0x01 /* 1 : HSYNC */ +#define HSSL_DVALID 0x02 /* 2 : DVALID */ +#define HSSL_HLOCK 0x03 /* 3 : HLOCK */ +#define HSSL_ASYNCW 0x04 /* 4 : ASYNCW */ +#define HSSL_ZERO 0x07 /* 7 : 0 */ + +/* ACNTL1 */ +#define SRESET 0x80 /* resets the device to its default state + * but all register content remain unchanged. + * This bit is self-resetting. + */ +#define ACNTL1_PDN_MASK 0x0e +#define CLK_PDN 0x08 /* system clock power down */ +#define Y_PDN 0x04 /* Luma ADC power down */ +#define C_PDN 0x02 /* Chroma ADC power down */ + +/* ACNTL2 */ +#define ACNTL2_PDN_MASK 0x40 +#define PLL_PDN 0x40 /* PLL power down */ + +/* VBICNTL */ + +/* RTSEL : control the real time signal output from the MPOUT pin */ +#define RTSEL_MASK 0x07 +#define RTSEL_VLOSS 0x00 /* 0000 = Video loss */ +#define RTSEL_HLOCK 0x01 /* 0001 = H-lock */ +#define RTSEL_SLOCK 0x02 /* 0010 = S-lock */ +#define RTSEL_VLOCK 0x03 /* 0011 = V-lock */ +#define RTSEL_MONO 0x04 /* 0100 = MONO */ +#define RTSEL_DET50 0x05 /* 0101 = DET50 */ +#define RTSEL_FIELD 0x06 /* 0110 = FIELD */ +#define RTSEL_RTCO 0x07 /* 0111 = RTCO ( Real Time Control ) */ + +/* HSYNC start and end are constant for now */ +#define HSYNC_START 0x0260 +#define HSYNC_END 0x0300 + +/* + * structure + */ + +struct regval_list { + unsigned char reg_num; + unsigned char value; +}; + +struct tw9910_scale_ctrl { + char *name; + unsigned short width; + unsigned short height; + u16 hscale; + u16 vscale; +}; + +struct tw9910_priv { + struct v4l2_subdev subdev; + struct tw9910_video_info *info; + const struct tw9910_scale_ctrl *scale; + v4l2_std_id norm; + u32 revision; +}; + +static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = { + { + .name = "NTSC SQ", + .width = 640, + .height = 480, + .hscale = 0x0100, + .vscale = 0x0100, + }, + { + .name = "NTSC CCIR601", + .width = 720, + .height = 480, + .hscale = 0x0100, + .vscale = 0x0100, + }, + { + .name = "NTSC SQ (CIF)", + .width = 320, + .height = 240, + .hscale = 0x0200, + .vscale = 0x0200, + }, + { + .name = "NTSC CCIR601 (CIF)", + .width = 360, + .height = 240, + .hscale = 0x0200, + .vscale = 0x0200, + }, + { + .name = "NTSC SQ (QCIF)", + .width = 160, + .height = 120, + .hscale = 0x0400, + .vscale = 0x0400, + }, + { + .name = "NTSC CCIR601 (QCIF)", + .width = 180, + .height = 120, + .hscale = 0x0400, + .vscale = 0x0400, + }, +}; + +static const struct tw9910_scale_ctrl tw9910_pal_scales[] = { + { + .name = "PAL SQ", + .width = 768, + .height = 576, + .hscale = 0x0100, + .vscale = 0x0100, + }, + { + .name = "PAL CCIR601", + .width = 720, + .height = 576, + .hscale = 0x0100, + .vscale = 0x0100, + }, + { + .name = "PAL SQ (CIF)", + .width = 384, + .height = 288, + .hscale = 0x0200, + .vscale = 0x0200, + }, + { + .name = "PAL CCIR601 (CIF)", + .width = 360, + .height = 288, + .hscale = 0x0200, + .vscale = 0x0200, + }, + { + .name = "PAL SQ (QCIF)", + .width = 192, + .height = 144, + .hscale = 0x0400, + .vscale = 0x0400, + }, + { + .name = "PAL CCIR601 (QCIF)", + .width = 180, + .height = 144, + .hscale = 0x0400, + .vscale = 0x0400, + }, +}; + +/* + * general function + */ +static struct tw9910_priv *to_tw9910(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct tw9910_priv, + subdev); +} + +static int tw9910_mask_set(struct i2c_client *client, u8 command, + u8 mask, u8 set) +{ + s32 val = i2c_smbus_read_byte_data(client, command); + if (val < 0) + return val; + + val &= ~mask; + val |= set & mask; + + return i2c_smbus_write_byte_data(client, command, val); +} + +static int tw9910_set_scale(struct i2c_client *client, + const struct tw9910_scale_ctrl *scale) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, SCALE_HI, + (scale->vscale & 0x0F00) >> 4 | + (scale->hscale & 0x0F00) >> 8); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, HSCALE_LO, + scale->hscale & 0x00FF); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, VSCALE_LO, + scale->vscale & 0x00FF); + + return ret; +} + +static int tw9910_set_hsync(struct i2c_client *client) +{ + struct tw9910_priv *priv = to_tw9910(client); + int ret; + + /* bit 10 - 3 */ + ret = i2c_smbus_write_byte_data(client, HSBEGIN, + (HSYNC_START & 0x07F8) >> 3); + if (ret < 0) + return ret; + + /* bit 10 - 3 */ + ret = i2c_smbus_write_byte_data(client, HSEND, + (HSYNC_END & 0x07F8) >> 3); + if (ret < 0) + return ret; + + /* So far only revisions 0 and 1 have been seen */ + /* bit 2 - 0 */ + if (1 == priv->revision) + ret = tw9910_mask_set(client, HSLOWCTL, 0x77, + (HSYNC_START & 0x0007) << 4 | + (HSYNC_END & 0x0007)); + + return ret; +} + +static void tw9910_reset(struct i2c_client *client) +{ + tw9910_mask_set(client, ACNTL1, SRESET, SRESET); + msleep(1); +} + +static int tw9910_power(struct i2c_client *client, int enable) +{ + int ret; + u8 acntl1; + u8 acntl2; + + if (enable) { + acntl1 = 0; + acntl2 = 0; + } else { + acntl1 = CLK_PDN | Y_PDN | C_PDN; + acntl2 = PLL_PDN; + } + + ret = tw9910_mask_set(client, ACNTL1, ACNTL1_PDN_MASK, acntl1); + if (ret < 0) + return ret; + + return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2); +} + +static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm, + u32 width, u32 height) +{ + const struct tw9910_scale_ctrl *scale; + const struct tw9910_scale_ctrl *ret = NULL; + __u32 diff = 0xffffffff, tmp; + int size, i; + + if (norm & V4L2_STD_NTSC) { + scale = tw9910_ntsc_scales; + size = ARRAY_SIZE(tw9910_ntsc_scales); + } else if (norm & V4L2_STD_PAL) { + scale = tw9910_pal_scales; + size = ARRAY_SIZE(tw9910_pal_scales); + } else { + return NULL; + } + + for (i = 0; i < size; i++) { + tmp = abs(width - scale[i].width) + + abs(height - scale[i].height); + if (tmp < diff) { + diff = tmp; + ret = scale + i; + } + } + + return ret; +} + +/* + * subdevice operations + */ +static int tw9910_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + u8 val; + int ret; + + if (!enable) { + switch (priv->revision) { + case 0: + val = OEN_TRI_SEL_ALL_OFF_r0; + break; + case 1: + val = OEN_TRI_SEL_ALL_OFF_r1; + break; + default: + dev_err(&client->dev, "un-supported revision\n"); + return -EINVAL; + } + } else { + val = OEN_TRI_SEL_ALL_ON; + + if (!priv->scale) { + dev_err(&client->dev, "norm select error\n"); + return -EPERM; + } + + dev_dbg(&client->dev, "%s %dx%d\n", + priv->scale->name, + priv->scale->width, + priv->scale->height); + } + + ret = tw9910_mask_set(client, OPFORM, OEN_TRI_SEL_MASK, val); + if (ret < 0) + return ret; + + return tw9910_power(client, enable); +} + +static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + + *norm = priv->norm; + + return 0; +} + +static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + + if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL))) + return -EINVAL; + + priv->norm = norm; + + return 0; +} + +static int tw9910_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + + id->ident = V4L2_IDENT_TW9910; + id->revision = priv->revision; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int tw9910_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + if (reg->reg > 0xff) + return -EINVAL; + + ret = i2c_smbus_read_byte_data(client, reg->reg); + if (ret < 0) + return ret; + + /* + * ret = int + * reg->val = __u64 + */ + reg->val = (__u64)ret; + + return 0; +} + +static int tw9910_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg > 0xff || + reg->val > 0xff) + return -EINVAL; + + return i2c_smbus_write_byte_data(client, reg->reg, reg->val); +} +#endif + +static int tw9910_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + return soc_camera_set_power(&client->dev, ssdd, on); +} + +static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + int ret = -EINVAL; + u8 val; + + /* + * select suitable norm + */ + priv->scale = tw9910_select_norm(priv->norm, *width, *height); + if (!priv->scale) + goto tw9910_set_fmt_error; + + /* + * reset hardware + */ + tw9910_reset(client); + + /* + * set bus width + */ + val = 0x00; + if (SOCAM_DATAWIDTH_16 == priv->info->buswidth) + val = LEN; + + ret = tw9910_mask_set(client, OPFORM, LEN, val); + if (ret < 0) + goto tw9910_set_fmt_error; + + /* + * select MPOUT behavior + */ + switch (priv->info->mpout) { + case TW9910_MPO_VLOSS: + val = RTSEL_VLOSS; break; + case TW9910_MPO_HLOCK: + val = RTSEL_HLOCK; break; + case TW9910_MPO_SLOCK: + val = RTSEL_SLOCK; break; + case TW9910_MPO_VLOCK: + val = RTSEL_VLOCK; break; + case TW9910_MPO_MONO: + val = RTSEL_MONO; break; + case TW9910_MPO_DET50: + val = RTSEL_DET50; break; + case TW9910_MPO_FIELD: + val = RTSEL_FIELD; break; + case TW9910_MPO_RTCO: + val = RTSEL_RTCO; break; + default: + val = 0; + } + + ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val); + if (ret < 0) + goto tw9910_set_fmt_error; + + /* + * set scale + */ + ret = tw9910_set_scale(client, priv->scale); + if (ret < 0) + goto tw9910_set_fmt_error; + + /* + * set hsync + */ + ret = tw9910_set_hsync(client); + if (ret < 0) + goto tw9910_set_fmt_error; + + *width = priv->scale->width; + *height = priv->scale->height; + + return ret; + +tw9910_set_fmt_error: + + tw9910_reset(client); + priv->scale = NULL; + + return ret; +} + +static int tw9910_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + + a->c.left = 0; + a->c.top = 0; + if (priv->norm & V4L2_STD_NTSC) { + a->c.width = 640; + a->c.height = 480; + } else { + a->c.width = 768; + a->c.height = 576; + } + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int tw9910_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + + a->bounds.left = 0; + a->bounds.top = 0; + if (priv->norm & V4L2_STD_NTSC) { + a->bounds.width = 640; + a->bounds.height = 480; + } else { + a->bounds.width = 768; + a->bounds.height = 576; + } + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int tw9910_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + + if (!priv->scale) { + priv->scale = tw9910_select_norm(priv->norm, 640, 480); + if (!priv->scale) + return -EINVAL; + } + + mf->width = priv->scale->width; + mf->height = priv->scale->height; + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->field = V4L2_FIELD_INTERLACED_BT; + + return 0; +} + +static int tw9910_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u32 width = mf->width, height = mf->height; + int ret; + + WARN_ON(mf->field != V4L2_FIELD_ANY && + mf->field != V4L2_FIELD_INTERLACED_BT); + + /* + * check color format + */ + if (mf->code != V4L2_MBUS_FMT_UYVY8_2X8) + return -EINVAL; + + mf->colorspace = V4L2_COLORSPACE_JPEG; + + ret = tw9910_set_frame(sd, &width, &height); + if (!ret) { + mf->width = width; + mf->height = height; + } + return ret; +} + +static int tw9910_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tw9910_priv *priv = to_tw9910(client); + const struct tw9910_scale_ctrl *scale; + + if (V4L2_FIELD_ANY == mf->field) { + mf->field = V4L2_FIELD_INTERLACED_BT; + } else if (V4L2_FIELD_INTERLACED_BT != mf->field) { + dev_err(&client->dev, "Field type %d invalid.\n", mf->field); + return -EINVAL; + } + + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + mf->colorspace = V4L2_COLORSPACE_JPEG; + + /* + * select suitable norm + */ + scale = tw9910_select_norm(priv->norm, mf->width, mf->height); + if (!scale) + return -EINVAL; + + mf->width = scale->width; + mf->height = scale->height; + + return 0; +} + +static int tw9910_video_probe(struct i2c_client *client) +{ + struct tw9910_priv *priv = to_tw9910(client); + s32 id; + int ret; + + /* + * tw9910 only use 8 or 16 bit bus width + */ + if (SOCAM_DATAWIDTH_16 != priv->info->buswidth && + SOCAM_DATAWIDTH_8 != priv->info->buswidth) { + dev_err(&client->dev, "bus width error\n"); + return -ENODEV; + } + + ret = tw9910_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + + /* + * check and show Product ID + * So far only revisions 0 and 1 have been seen + */ + id = i2c_smbus_read_byte_data(client, ID); + priv->revision = GET_REV(id); + id = GET_ID(id); + + if (0x0B != id || + 0x01 < priv->revision) { + dev_err(&client->dev, + "Product ID error %x:%x\n", + id, priv->revision); + ret = -ENODEV; + goto done; + } + + dev_info(&client->dev, + "tw9910 Product ID %0x:%0x\n", id, priv->revision); + + priv->norm = V4L2_STD_NTSC; + +done: + tw9910_s_power(&priv->subdev, 0); + return ret; +} + +static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { + .g_chip_ident = tw9910_g_chip_ident, + .s_std = tw9910_s_std, + .g_std = tw9910_g_std, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = tw9910_g_register, + .s_register = tw9910_s_register, +#endif + .s_power = tw9910_s_power, +}; + +static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_UYVY8_2X8; + return 0; +} + +static int tw9910_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); + + return 0; +} + +static int tw9910_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + u8 val = VSSL_VVALID | HSSL_DVALID; + unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg); + + /* + * set OUTCTR1 + * + * We use VVALID and DVALID signals to control VSYNC and HSYNC + * outputs, in this mode their polarity is inverted. + */ + if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + val |= HSP_HI; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + val |= VSP_HI; + + return i2c_smbus_write_byte_data(client, OUTCTR1, val); +} + +static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { + .s_stream = tw9910_s_stream, + .g_mbus_fmt = tw9910_g_fmt, + .s_mbus_fmt = tw9910_s_fmt, + .try_mbus_fmt = tw9910_try_fmt, + .cropcap = tw9910_cropcap, + .g_crop = tw9910_g_crop, + .enum_mbus_fmt = tw9910_enum_fmt, + .g_mbus_config = tw9910_g_mbus_config, + .s_mbus_config = tw9910_s_mbus_config, +}; + +static struct v4l2_subdev_ops tw9910_subdev_ops = { + .core = &tw9910_subdev_core_ops, + .video = &tw9910_subdev_video_ops, +}; + +/* + * i2c_driver function + */ + +static int tw9910_probe(struct i2c_client *client, + const struct i2c_device_id *did) + +{ + struct tw9910_priv *priv; + struct tw9910_video_info *info; + struct i2c_adapter *adapter = + to_i2c_adapter(client->dev.parent); + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); + + if (!ssdd || !ssdd->drv_priv) { + dev_err(&client->dev, "TW9910: missing platform data!\n"); + return -EINVAL; + } + + info = ssdd->drv_priv; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, + "I2C-Adapter doesn't support " + "I2C_FUNC_SMBUS_BYTE_DATA\n"); + return -EIO; + } + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->info = info; + + v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops); + + return tw9910_video_probe(client); +} + +static int tw9910_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct i2c_device_id tw9910_id[] = { + { "tw9910", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tw9910_id); + +static struct i2c_driver tw9910_i2c_driver = { + .driver = { + .name = "tw9910", + }, + .probe = tw9910_probe, + .remove = tw9910_remove, + .id_table = tw9910_id, +}; + +module_i2c_driver(tw9910_i2c_driver); + +MODULE_DESCRIPTION("SoC Camera driver for tw9910"); +MODULE_AUTHOR("Kuninori Morimoto"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/sony-btf-mpx.c b/drivers/media/i2c/sony-btf-mpx.c new file mode 100644 index 00000000..38cbea98 --- /dev/null +++ b/drivers/media/i2c/sony-btf-mpx.c @@ -0,0 +1,399 @@ +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("sony-btf-mpx driver"); +MODULE_LICENSE("GPL v2"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level 0=off(default) 1=on\n"); + +/* #define MPX_DEBUG */ + +/* + * Note: + * + * AS(IF/MPX) pin: LOW HIGH/OPEN + * IF/MPX address: 0x42/0x40 0x43/0x44 + */ + + +static int force_mpx_mode = -1; +module_param(force_mpx_mode, int, 0644); + +struct sony_btf_mpx { + struct v4l2_subdev sd; + int mpxmode; + u32 audmode; +}; + +static inline struct sony_btf_mpx *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct sony_btf_mpx, sd); +} + +static int mpx_write(struct i2c_client *client, int dev, int addr, int val) +{ + u8 buffer[5]; + struct i2c_msg msg; + + buffer[0] = dev; + buffer[1] = addr >> 8; + buffer[2] = addr & 0xff; + buffer[3] = val >> 8; + buffer[4] = val & 0xff; + msg.addr = client->addr; + msg.flags = 0; + msg.len = 5; + msg.buf = buffer; + i2c_transfer(client->adapter, &msg, 1); + return 0; +} + +/* + * MPX register values for the BTF-PG472Z: + * + * FM_ NICAM_ SCART_ + * MODUS SOURCE ACB PRESCAL PRESCAL PRESCAL SYSTEM VOLUME + * 10/0030 12/0008 12/0013 12/000E 12/0010 12/0000 10/0020 12/0000 + * --------------------------------------------------------------- + * Auto 1003 0020 0100 2603 5000 XXXX 0001 7500 + * + * B/G + * Mono 1003 0020 0100 2603 5000 XXXX 0003 7500 + * A2 1003 0020 0100 2601 5000 XXXX 0003 7500 + * NICAM 1003 0120 0100 2603 5000 XXXX 0008 7500 + * + * I + * Mono 1003 0020 0100 2603 7900 XXXX 000A 7500 + * NICAM 1003 0120 0100 2603 7900 XXXX 000A 7500 + * + * D/K + * Mono 1003 0020 0100 2603 5000 XXXX 0004 7500 + * A2-1 1003 0020 0100 2601 5000 XXXX 0004 7500 + * A2-2 1003 0020 0100 2601 5000 XXXX 0005 7500 + * A2-3 1003 0020 0100 2601 5000 XXXX 0007 7500 + * NICAM 1003 0120 0100 2603 5000 XXXX 000B 7500 + * + * L/L' + * Mono 0003 0200 0100 7C03 5000 2200 0009 7500 + * NICAM 0003 0120 0100 7C03 5000 XXXX 0009 7500 + * + * M + * Mono 1003 0200 0100 2B03 5000 2B00 0002 7500 + * + * For Asia, replace the 0x26XX in FM_PRESCALE with 0x14XX. + * + * Bilingual selection in A2/NICAM: + * + * High byte of SOURCE Left chan Right chan + * 0x01 MAIN SUB + * 0x03 MAIN MAIN + * 0x04 SUB SUB + * + * Force mono in NICAM by setting the high byte of SOURCE to 0x02 (L/L') or + * 0x00 (all other bands). Force mono in A2 with FMONO_A2: + * + * FMONO_A2 + * 10/0022 + * -------- + * Forced mono ON 07F0 + * Forced mono OFF 0190 + */ + +static const struct { + enum { AUD_MONO, AUD_A2, AUD_NICAM, AUD_NICAM_L } audio_mode; + u16 modus; + u16 source; + u16 acb; + u16 fm_prescale; + u16 nicam_prescale; + u16 scart_prescale; + u16 system; + u16 volume; +} mpx_audio_modes[] = { + /* Auto */ { AUD_MONO, 0x1003, 0x0020, 0x0100, 0x2603, + 0x5000, 0x0000, 0x0001, 0x7500 }, + /* B/G Mono */ { AUD_MONO, 0x1003, 0x0020, 0x0100, 0x2603, + 0x5000, 0x0000, 0x0003, 0x7500 }, + /* B/G A2 */ { AUD_A2, 0x1003, 0x0020, 0x0100, 0x2601, + 0x5000, 0x0000, 0x0003, 0x7500 }, + /* B/G NICAM */ { AUD_NICAM, 0x1003, 0x0120, 0x0100, 0x2603, + 0x5000, 0x0000, 0x0008, 0x7500 }, + /* I Mono */ { AUD_MONO, 0x1003, 0x0020, 0x0100, 0x2603, + 0x7900, 0x0000, 0x000A, 0x7500 }, + /* I NICAM */ { AUD_NICAM, 0x1003, 0x0120, 0x0100, 0x2603, + 0x7900, 0x0000, 0x000A, 0x7500 }, + /* D/K Mono */ { AUD_MONO, 0x1003, 0x0020, 0x0100, 0x2603, + 0x5000, 0x0000, 0x0004, 0x7500 }, + /* D/K A2-1 */ { AUD_A2, 0x1003, 0x0020, 0x0100, 0x2601, + 0x5000, 0x0000, 0x0004, 0x7500 }, + /* D/K A2-2 */ { AUD_A2, 0x1003, 0x0020, 0x0100, 0x2601, + 0x5000, 0x0000, 0x0005, 0x7500 }, + /* D/K A2-3 */ { AUD_A2, 0x1003, 0x0020, 0x0100, 0x2601, + 0x5000, 0x0000, 0x0007, 0x7500 }, + /* D/K NICAM */ { AUD_NICAM, 0x1003, 0x0120, 0x0100, 0x2603, + 0x5000, 0x0000, 0x000B, 0x7500 }, + /* L/L' Mono */ { AUD_MONO, 0x0003, 0x0200, 0x0100, 0x7C03, + 0x5000, 0x2200, 0x0009, 0x7500 }, + /* L/L' NICAM */{ AUD_NICAM_L, 0x0003, 0x0120, 0x0100, 0x7C03, + 0x5000, 0x0000, 0x0009, 0x7500 }, +}; + +#define MPX_NUM_MODES ARRAY_SIZE(mpx_audio_modes) + +static int mpx_setup(struct sony_btf_mpx *t) +{ + struct i2c_client *client = v4l2_get_subdevdata(&t->sd); + u16 source = 0; + u8 buffer[3]; + struct i2c_msg msg; + int mode = t->mpxmode; + + /* reset MPX */ + buffer[0] = 0x00; + buffer[1] = 0x80; + buffer[2] = 0x00; + msg.addr = client->addr; + msg.flags = 0; + msg.len = 3; + msg.buf = buffer; + i2c_transfer(client->adapter, &msg, 1); + buffer[1] = 0x00; + i2c_transfer(client->adapter, &msg, 1); + + if (t->audmode != V4L2_TUNER_MODE_MONO) + mode++; + + if (mpx_audio_modes[mode].audio_mode != AUD_MONO) { + switch (t->audmode) { + case V4L2_TUNER_MODE_MONO: + switch (mpx_audio_modes[mode].audio_mode) { + case AUD_A2: + source = mpx_audio_modes[mode].source; + break; + case AUD_NICAM: + source = 0x0000; + break; + case AUD_NICAM_L: + source = 0x0200; + break; + default: + break; + } + break; + case V4L2_TUNER_MODE_STEREO: + source = mpx_audio_modes[mode].source; + break; + case V4L2_TUNER_MODE_LANG1: + source = 0x0300; + break; + case V4L2_TUNER_MODE_LANG2: + source = 0x0400; + break; + } + source |= mpx_audio_modes[mode].source & 0x00ff; + } else + source = mpx_audio_modes[mode].source; + + mpx_write(client, 0x10, 0x0030, mpx_audio_modes[mode].modus); + mpx_write(client, 0x12, 0x0008, source); + mpx_write(client, 0x12, 0x0013, mpx_audio_modes[mode].acb); + mpx_write(client, 0x12, 0x000e, + mpx_audio_modes[mode].fm_prescale); + mpx_write(client, 0x12, 0x0010, + mpx_audio_modes[mode].nicam_prescale); + mpx_write(client, 0x12, 0x000d, + mpx_audio_modes[mode].scart_prescale); + mpx_write(client, 0x10, 0x0020, mpx_audio_modes[mode].system); + mpx_write(client, 0x12, 0x0000, mpx_audio_modes[mode].volume); + if (mpx_audio_modes[mode].audio_mode == AUD_A2) + mpx_write(client, 0x10, 0x0022, + t->audmode == V4L2_TUNER_MODE_MONO ? 0x07f0 : 0x0190); + +#ifdef MPX_DEBUG + { + u8 buf1[3], buf2[2]; + struct i2c_msg msgs[2]; + + v4l2_info(client, + "MPX registers: %04x %04x %04x %04x %04x %04x %04x %04x\n", + mpx_audio_modes[mode].modus, + source, + mpx_audio_modes[mode].acb, + mpx_audio_modes[mode].fm_prescale, + mpx_audio_modes[mode].nicam_prescale, + mpx_audio_modes[mode].scart_prescale, + mpx_audio_modes[mode].system, + mpx_audio_modes[mode].volume); + buf1[0] = 0x11; + buf1[1] = 0x00; + buf1[2] = 0x7e; + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = 3; + msgs[0].buf = buf1; + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = 2; + msgs[1].buf = buf2; + i2c_transfer(client->adapter, msgs, 2); + v4l2_info(client, "MPX system: %02x%02x\n", + buf2[0], buf2[1]); + buf1[0] = 0x11; + buf1[1] = 0x02; + buf1[2] = 0x00; + i2c_transfer(client->adapter, msgs, 2); + v4l2_info(client, "MPX status: %02x%02x\n", + buf2[0], buf2[1]); + } +#endif + return 0; +} + + +static int sony_btf_mpx_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct sony_btf_mpx *t = to_state(sd); + int default_mpx_mode = 0; + + if (std & V4L2_STD_PAL_BG) + default_mpx_mode = 1; + else if (std & V4L2_STD_PAL_I) + default_mpx_mode = 4; + else if (std & V4L2_STD_PAL_DK) + default_mpx_mode = 6; + else if (std & V4L2_STD_SECAM_L) + default_mpx_mode = 11; + + if (default_mpx_mode != t->mpxmode) { + t->mpxmode = default_mpx_mode; + mpx_setup(t); + } + return 0; +} + +static int sony_btf_mpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct sony_btf_mpx *t = to_state(sd); + + vt->capability = V4L2_TUNER_CAP_NORM | + V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2; + vt->rxsubchans = V4L2_TUNER_SUB_MONO | + V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | + V4L2_TUNER_SUB_LANG2; + vt->audmode = t->audmode; + return 0; +} + +static int sony_btf_mpx_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct sony_btf_mpx *t = to_state(sd); + + if (vt->type != V4L2_TUNER_ANALOG_TV) + return -EINVAL; + + if (vt->audmode != t->audmode) { + t->audmode = vt->audmode; + mpx_setup(t); + } + return 0; +} + +/* --------------------------------------------------------------------------*/ + +static const struct v4l2_subdev_core_ops sony_btf_mpx_core_ops = { + .s_std = sony_btf_mpx_s_std, +}; + +static const struct v4l2_subdev_tuner_ops sony_btf_mpx_tuner_ops = { + .s_tuner = sony_btf_mpx_s_tuner, + .g_tuner = sony_btf_mpx_g_tuner, +}; + +static const struct v4l2_subdev_ops sony_btf_mpx_ops = { + .core = &sony_btf_mpx_core_ops, + .tuner = &sony_btf_mpx_tuner_ops, +}; + +/* --------------------------------------------------------------------------*/ + +static int sony_btf_mpx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sony_btf_mpx *t; + struct v4l2_subdev *sd; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + t = kzalloc(sizeof(struct sony_btf_mpx), GFP_KERNEL); + if (t == NULL) + return -ENOMEM; + + sd = &t->sd; + v4l2_i2c_subdev_init(sd, client, &sony_btf_mpx_ops); + + /* Initialize sony_btf_mpx */ + t->mpxmode = 0; + t->audmode = V4L2_TUNER_MODE_STEREO; + + return 0; +} + +static int sony_btf_mpx_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id sony_btf_mpx_id[] = { + { "sony-btf-mpx", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sony_btf_mpx_id); + +static struct i2c_driver sony_btf_mpx_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "sony-btf-mpx", + }, + .probe = sony_btf_mpx_probe, + .remove = sony_btf_mpx_remove, + .id_table = sony_btf_mpx_id, +}; +module_i2c_driver(sony_btf_mpx_driver); diff --git a/drivers/media/i2c/sr030pc30.c b/drivers/media/i2c/sr030pc30.c new file mode 100644 index 00000000..e9d95bda --- /dev/null +++ b/drivers/media/i2c/sr030pc30.c @@ -0,0 +1,871 @@ +/* + * Driver for SiliconFile SR030PC30 VGA (1/10-Inch) Image Sensor with ISP + * + * Copyright (C) 2010 Samsung Electronics Co., Ltd + * Author: Sylwester Nawrocki, s.nawrocki@samsung.com + * + * Based on original driver authored by Dongsoo Nathaniel Kim + * and HeungJun Kim . + * + * Based on mt9v011 Micron Digital Image Sensor driver + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); + +#define MODULE_NAME "SR030PC30" + +/* + * Register offsets within a page + * b15..b8 - page id, b7..b0 - register address + */ +#define POWER_CTRL_REG 0x0001 +#define PAGEMODE_REG 0x03 +#define DEVICE_ID_REG 0x0004 +#define NOON010PC30_ID 0x86 +#define SR030PC30_ID 0x8C +#define VDO_CTL1_REG 0x0010 +#define SUBSAMPL_NONE_VGA 0 +#define SUBSAMPL_QVGA 0x10 +#define SUBSAMPL_QQVGA 0x20 +#define VDO_CTL2_REG 0x0011 +#define SYNC_CTL_REG 0x0012 +#define WIN_ROWH_REG 0x0020 +#define WIN_ROWL_REG 0x0021 +#define WIN_COLH_REG 0x0022 +#define WIN_COLL_REG 0x0023 +#define WIN_HEIGHTH_REG 0x0024 +#define WIN_HEIGHTL_REG 0x0025 +#define WIN_WIDTHH_REG 0x0026 +#define WIN_WIDTHL_REG 0x0027 +#define HBLANKH_REG 0x0040 +#define HBLANKL_REG 0x0041 +#define VSYNCH_REG 0x0042 +#define VSYNCL_REG 0x0043 +/* page 10 */ +#define ISP_CTL_REG(n) (0x1010 + (n)) +#define YOFS_REG 0x1040 +#define DARK_YOFS_REG 0x1041 +#define AG_ABRTH_REG 0x1050 +#define SAT_CTL_REG 0x1060 +#define BSAT_REG 0x1061 +#define RSAT_REG 0x1062 +#define AG_SAT_TH_REG 0x1063 +/* page 11 */ +#define ZLPF_CTRL_REG 0x1110 +#define ZLPF_CTRL2_REG 0x1112 +#define ZLPF_AGH_THR_REG 0x1121 +#define ZLPF_THR_REG 0x1160 +#define ZLPF_DYN_THR_REG 0x1160 +/* page 12 */ +#define YCLPF_CTL1_REG 0x1240 +#define YCLPF_CTL2_REG 0x1241 +#define YCLPF_THR_REG 0x1250 +#define BLPF_CTL_REG 0x1270 +#define BLPF_THR1_REG 0x1274 +#define BLPF_THR2_REG 0x1275 +/* page 14 - Lens Shading Compensation */ +#define LENS_CTRL_REG 0x1410 +#define LENS_XCEN_REG 0x1420 +#define LENS_YCEN_REG 0x1421 +#define LENS_R_COMP_REG 0x1422 +#define LENS_G_COMP_REG 0x1423 +#define LENS_B_COMP_REG 0x1424 +/* page 15 - Color correction */ +#define CMC_CTL_REG 0x1510 +#define CMC_OFSGH_REG 0x1514 +#define CMC_OFSGL_REG 0x1516 +#define CMC_SIGN_REG 0x1517 +/* Color correction coefficients */ +#define CMC_COEF_REG(n) (0x1530 + (n)) +/* Color correction offset coefficients */ +#define CMC_OFS_REG(n) (0x1540 + (n)) +/* page 16 - Gamma correction */ +#define GMA_CTL_REG 0x1610 +/* Gamma correction coefficients 0.14 */ +#define GMA_COEF_REG(n) (0x1630 + (n)) +/* page 20 - Auto Exposure */ +#define AE_CTL1_REG 0x2010 +#define AE_CTL2_REG 0x2011 +#define AE_FRM_CTL_REG 0x2020 +#define AE_FINE_CTL_REG(n) (0x2028 + (n)) +#define EXP_TIMEH_REG 0x2083 +#define EXP_TIMEM_REG 0x2084 +#define EXP_TIMEL_REG 0x2085 +#define EXP_MMINH_REG 0x2086 +#define EXP_MMINL_REG 0x2087 +#define EXP_MMAXH_REG 0x2088 +#define EXP_MMAXM_REG 0x2089 +#define EXP_MMAXL_REG 0x208A +/* page 22 - Auto White Balance */ +#define AWB_CTL1_REG 0x2210 +#define AWB_ENABLE 0x80 +#define AWB_CTL2_REG 0x2211 +#define MWB_ENABLE 0x01 +/* RGB gain control (manual WB) when AWB_CTL1[7]=0 */ +#define AWB_RGAIN_REG 0x2280 +#define AWB_GGAIN_REG 0x2281 +#define AWB_BGAIN_REG 0x2282 +#define AWB_RMAX_REG 0x2283 +#define AWB_RMIN_REG 0x2284 +#define AWB_BMAX_REG 0x2285 +#define AWB_BMIN_REG 0x2286 +/* R, B gain range in bright light conditions */ +#define AWB_RMAXB_REG 0x2287 +#define AWB_RMINB_REG 0x2288 +#define AWB_BMAXB_REG 0x2289 +#define AWB_BMINB_REG 0x228A +/* manual white balance, when AWB_CTL2[0]=1 */ +#define MWB_RGAIN_REG 0x22B2 +#define MWB_BGAIN_REG 0x22B3 +/* the token to mark an array end */ +#define REG_TERM 0xFFFF + +/* Minimum and maximum exposure time in ms */ +#define EXPOS_MIN_MS 1 +#define EXPOS_MAX_MS 125 + +struct sr030pc30_info { + struct v4l2_subdev sd; + const struct sr030pc30_platform_data *pdata; + const struct sr030pc30_format *curr_fmt; + const struct sr030pc30_frmsize *curr_win; + unsigned int auto_wb:1; + unsigned int auto_exp:1; + unsigned int hflip:1; + unsigned int vflip:1; + unsigned int sleep:1; + unsigned int exposure; + u8 blue_balance; + u8 red_balance; + u8 i2c_reg_page; +}; + +struct sr030pc30_format { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; + u16 ispctl1_reg; +}; + +struct sr030pc30_frmsize { + u16 width; + u16 height; + int vid_ctl1; +}; + +struct i2c_regval { + u16 addr; + u16 val; +}; + +static const struct v4l2_queryctrl sr030pc30_ctrl[] = { + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto White Balance", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 64, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 64, + }, { + .id = V4L2_CID_EXPOSURE_AUTO, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Auto Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + }, { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = EXPOS_MIN_MS, + .maximum = EXPOS_MAX_MS, + .step = 1, + .default_value = 1, + }, { + } +}; + +/* supported resolutions */ +static const struct sr030pc30_frmsize sr030pc30_sizes[] = { + { + .width = 640, + .height = 480, + .vid_ctl1 = SUBSAMPL_NONE_VGA, + }, { + .width = 320, + .height = 240, + .vid_ctl1 = SUBSAMPL_QVGA, + }, { + .width = 160, + .height = 120, + .vid_ctl1 = SUBSAMPL_QQVGA, + }, +}; + +/* supported pixel formats */ +static const struct sr030pc30_format sr030pc30_formats[] = { + { + .code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x03, + }, { + .code = V4L2_MBUS_FMT_YVYU8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x02, + }, { + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0, + }, { + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x01, + }, { + .code = V4L2_MBUS_FMT_RGB565_2X8_BE, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x40, + }, +}; + +static const struct i2c_regval sr030pc30_base_regs[] = { + /* Window size and position within pixel matrix */ + { WIN_ROWH_REG, 0x00 }, { WIN_ROWL_REG, 0x06 }, + { WIN_COLH_REG, 0x00 }, { WIN_COLL_REG, 0x06 }, + { WIN_HEIGHTH_REG, 0x01 }, { WIN_HEIGHTL_REG, 0xE0 }, + { WIN_WIDTHH_REG, 0x02 }, { WIN_WIDTHL_REG, 0x80 }, + { HBLANKH_REG, 0x01 }, { HBLANKL_REG, 0x50 }, + { VSYNCH_REG, 0x00 }, { VSYNCL_REG, 0x14 }, + { SYNC_CTL_REG, 0 }, + /* Color corection and saturation */ + { ISP_CTL_REG(0), 0x30 }, { YOFS_REG, 0x80 }, + { DARK_YOFS_REG, 0x04 }, { AG_ABRTH_REG, 0x78 }, + { SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 }, + { AG_SAT_TH_REG, 0xF0 }, { 0x1064, 0x80 }, + { CMC_CTL_REG, 0x03 }, { CMC_OFSGH_REG, 0x3C }, + { CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x2F }, + { CMC_COEF_REG(0), 0xCB }, { CMC_OFS_REG(0), 0x87 }, + { CMC_COEF_REG(1), 0x61 }, { CMC_OFS_REG(1), 0x18 }, + { CMC_COEF_REG(2), 0x16 }, { CMC_OFS_REG(2), 0x91 }, + { CMC_COEF_REG(3), 0x23 }, { CMC_OFS_REG(3), 0x94 }, + { CMC_COEF_REG(4), 0xCE }, { CMC_OFS_REG(4), 0x9f }, + { CMC_COEF_REG(5), 0x2B }, { CMC_OFS_REG(5), 0x33 }, + { CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x00 }, + { CMC_COEF_REG(7), 0x34 }, { CMC_OFS_REG(7), 0x94 }, + { CMC_COEF_REG(8), 0x75 }, { CMC_OFS_REG(8), 0x14 }, + /* Color corection coefficients */ + { GMA_CTL_REG, 0x03 }, { GMA_COEF_REG(0), 0x00 }, + { GMA_COEF_REG(1), 0x19 }, { GMA_COEF_REG(2), 0x26 }, + { GMA_COEF_REG(3), 0x3B }, { GMA_COEF_REG(4), 0x5D }, + { GMA_COEF_REG(5), 0x79 }, { GMA_COEF_REG(6), 0x8E }, + { GMA_COEF_REG(7), 0x9F }, { GMA_COEF_REG(8), 0xAF }, + { GMA_COEF_REG(9), 0xBD }, { GMA_COEF_REG(10), 0xCA }, + { GMA_COEF_REG(11), 0xDD }, { GMA_COEF_REG(12), 0xEC }, + { GMA_COEF_REG(13), 0xF7 }, { GMA_COEF_REG(14), 0xFF }, + /* Noise reduction, Z-LPF, YC-LPF and BLPF filters setup */ + { ZLPF_CTRL_REG, 0x99 }, { ZLPF_CTRL2_REG, 0x0E }, + { ZLPF_AGH_THR_REG, 0x29 }, { ZLPF_THR_REG, 0x0F }, + { ZLPF_DYN_THR_REG, 0x63 }, { YCLPF_CTL1_REG, 0x23 }, + { YCLPF_CTL2_REG, 0x3B }, { YCLPF_THR_REG, 0x05 }, + { BLPF_CTL_REG, 0x1D }, { BLPF_THR1_REG, 0x05 }, + { BLPF_THR2_REG, 0x04 }, + /* Automatic white balance */ + { AWB_CTL1_REG, 0xFB }, { AWB_CTL2_REG, 0x26 }, + { AWB_RMAX_REG, 0x54 }, { AWB_RMIN_REG, 0x2B }, + { AWB_BMAX_REG, 0x57 }, { AWB_BMIN_REG, 0x29 }, + { AWB_RMAXB_REG, 0x50 }, { AWB_RMINB_REG, 0x43 }, + { AWB_BMAXB_REG, 0x30 }, { AWB_BMINB_REG, 0x22 }, + /* Auto exposure */ + { AE_CTL1_REG, 0x8C }, { AE_CTL2_REG, 0x04 }, + { AE_FRM_CTL_REG, 0x01 }, { AE_FINE_CTL_REG(0), 0x3F }, + { AE_FINE_CTL_REG(1), 0xA3 }, { AE_FINE_CTL_REG(3), 0x34 }, + /* Lens shading compensation */ + { LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 }, + { LENS_YCEN_REG, 0x70 }, { LENS_R_COMP_REG, 0x53 }, + { LENS_G_COMP_REG, 0x40 }, { LENS_B_COMP_REG, 0x3e }, + { REG_TERM, 0 }, +}; + +static inline struct sr030pc30_info *to_sr030pc30(struct v4l2_subdev *sd) +{ + return container_of(sd, struct sr030pc30_info, sd); +} + +static inline int set_i2c_page(struct sr030pc30_info *info, + struct i2c_client *client, unsigned int reg) +{ + int ret = 0; + u32 page = reg >> 8 & 0xFF; + + if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { + ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); + if (!ret) + info->i2c_reg_page = page; + } + return ret; +} + +static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct sr030pc30_info *info = to_sr030pc30(sd); + + int ret = set_i2c_page(info, client, reg_addr); + if (!ret) + ret = i2c_smbus_read_byte_data(client, reg_addr & 0xFF); + return ret; +} + +static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct sr030pc30_info *info = to_sr030pc30(sd); + + int ret = set_i2c_page(info, client, reg_addr); + if (!ret) + ret = i2c_smbus_write_byte_data( + client, reg_addr & 0xFF, val); + return ret; +} + +static inline int sr030pc30_bulk_write_reg(struct v4l2_subdev *sd, + const struct i2c_regval *msg) +{ + while (msg->addr != REG_TERM) { + int ret = cam_i2c_write(sd, msg->addr, msg->val); + if (ret) + return ret; + msg++; + } + return 0; +} + +/* Device reset and sleep mode control */ +static int sr030pc30_pwr_ctrl(struct v4l2_subdev *sd, + bool reset, bool sleep) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + u8 reg = sleep ? 0xF1 : 0xF0; + int ret = 0; + + if (reset) + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); + if (!ret) { + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); + if (!ret) { + info->sleep = sleep; + if (reset) + info->i2c_reg_page = -1; + } + } + return ret; +} + +static inline int sr030pc30_enable_autoexposure(struct v4l2_subdev *sd, int on) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + /* auto anti-flicker is also enabled here */ + int ret = cam_i2c_write(sd, AE_CTL1_REG, on ? 0xDC : 0x0C); + if (!ret) + info->auto_exp = on; + return ret; +} + +static int sr030pc30_set_exposure(struct v4l2_subdev *sd, int value) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + unsigned long expos = value * info->pdata->clk_rate / (8 * 1000); + + int ret = cam_i2c_write(sd, EXP_TIMEH_REG, expos >> 16 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_TIMEM_REG, expos >> 8 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_TIMEL_REG, expos & 0xFF); + if (!ret) { /* Turn off AE */ + info->exposure = value; + ret = sr030pc30_enable_autoexposure(sd, 0); + } + return ret; +} + +/* Automatic white balance control */ +static int sr030pc30_enable_autowhitebalance(struct v4l2_subdev *sd, int on) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + int ret = cam_i2c_write(sd, AWB_CTL2_REG, on ? 0x2E : 0x2F); + if (!ret) + ret = cam_i2c_write(sd, AWB_CTL1_REG, on ? 0xFB : 0x7B); + if (!ret) + info->auto_wb = on; + + return ret; +} + +static int sr030pc30_set_flip(struct v4l2_subdev *sd) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + s32 reg = cam_i2c_read(sd, VDO_CTL2_REG); + if (reg < 0) + return reg; + + reg &= 0x7C; + if (info->hflip) + reg |= 0x01; + if (info->vflip) + reg |= 0x02; + return cam_i2c_write(sd, VDO_CTL2_REG, reg | 0x80); +} + +/* Configure resolution, color format and image flip */ +static int sr030pc30_set_params(struct v4l2_subdev *sd) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + int ret; + + if (!info->curr_win) + return -EINVAL; + + /* Configure the resolution through subsampling */ + ret = cam_i2c_write(sd, VDO_CTL1_REG, + info->curr_win->vid_ctl1); + + if (!ret && info->curr_fmt) + ret = cam_i2c_write(sd, ISP_CTL_REG(0), + info->curr_fmt->ispctl1_reg); + if (!ret) + ret = sr030pc30_set_flip(sd); + + return ret; +} + +/* Find nearest matching image pixel size. */ +static int sr030pc30_try_frame_size(struct v4l2_mbus_framefmt *mf) +{ + unsigned int min_err = ~0; + int i = ARRAY_SIZE(sr030pc30_sizes); + const struct sr030pc30_frmsize *fsize = &sr030pc30_sizes[0], + *match = NULL; + while (i--) { + int err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + if (err < min_err) { + min_err = err; + match = fsize; + } + fsize++; + } + if (match) { + mf->width = match->width; + mf->height = match->height; + return 0; + } + return -EINVAL; +} + +static int sr030pc30_queryctrl(struct v4l2_subdev *sd, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++) + if (qc->id == sr030pc30_ctrl[i].id) { + *qc = sr030pc30_ctrl[i]; + v4l2_dbg(1, debug, sd, "%s id: %d\n", + __func__, qc->id); + return 0; + } + + return -EINVAL; +} + +static inline int sr030pc30_set_bluebalance(struct v4l2_subdev *sd, int value) +{ + int ret = cam_i2c_write(sd, MWB_BGAIN_REG, value); + if (!ret) + to_sr030pc30(sd)->blue_balance = value; + return ret; +} + +static inline int sr030pc30_set_redbalance(struct v4l2_subdev *sd, int value) +{ + int ret = cam_i2c_write(sd, MWB_RGAIN_REG, value); + if (!ret) + to_sr030pc30(sd)->red_balance = value; + return ret; +} + +static int sr030pc30_s_ctrl(struct v4l2_subdev *sd, + struct v4l2_control *ctrl) +{ + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++) + if (ctrl->id == sr030pc30_ctrl[i].id) + break; + + if (i == ARRAY_SIZE(sr030pc30_ctrl)) + return -EINVAL; + + if (ctrl->value < sr030pc30_ctrl[i].minimum || + ctrl->value > sr030pc30_ctrl[i].maximum) + return -ERANGE; + + v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", + __func__, ctrl->id, ctrl->value); + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + sr030pc30_enable_autowhitebalance(sd, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + ret = sr030pc30_set_bluebalance(sd, ctrl->value); + break; + case V4L2_CID_RED_BALANCE: + ret = sr030pc30_set_redbalance(sd, ctrl->value); + break; + case V4L2_CID_EXPOSURE_AUTO: + sr030pc30_enable_autoexposure(sd, + ctrl->value == V4L2_EXPOSURE_AUTO); + break; + case V4L2_CID_EXPOSURE: + ret = sr030pc30_set_exposure(sd, ctrl->value); + break; + default: + return -EINVAL; + } + + return ret; +} + +static int sr030pc30_g_ctrl(struct v4l2_subdev *sd, + struct v4l2_control *ctrl) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + v4l2_dbg(1, debug, sd, "%s: id: %d\n", __func__, ctrl->id); + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + ctrl->value = info->auto_wb; + break; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = info->blue_balance; + break; + case V4L2_CID_RED_BALANCE: + ctrl->value = info->red_balance; + break; + case V4L2_CID_EXPOSURE_AUTO: + ctrl->value = info->auto_exp; + break; + case V4L2_CID_EXPOSURE: + ctrl->value = info->exposure; + break; + default: + return -EINVAL; + } + return 0; +} + +static int sr030pc30_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (!code || index >= ARRAY_SIZE(sr030pc30_formats)) + return -EINVAL; + + *code = sr030pc30_formats[index].code; + return 0; +} + +static int sr030pc30_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + int ret; + + if (!mf) + return -EINVAL; + + if (!info->curr_win || !info->curr_fmt) { + ret = sr030pc30_set_params(sd); + if (ret) + return ret; + } + + mf->width = info->curr_win->width; + mf->height = info->curr_win->height; + mf->code = info->curr_fmt->code; + mf->colorspace = info->curr_fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +/* Return nearest media bus frame format. */ +static const struct sr030pc30_format *try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + int i = ARRAY_SIZE(sr030pc30_formats); + + sr030pc30_try_frame_size(mf); + + while (i--) + if (mf->code == sr030pc30_formats[i].code) + break; + + mf->code = sr030pc30_formats[i].code; + + return &sr030pc30_formats[i]; +} + +/* Return nearest media bus frame format. */ +static int sr030pc30_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + if (!sd || !mf) + return -EINVAL; + + try_fmt(sd, mf); + return 0; +} + +static int sr030pc30_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + if (!sd || !mf) + return -EINVAL; + + info->curr_fmt = try_fmt(sd, mf); + + return sr030pc30_set_params(sd); +} + +static int sr030pc30_base_config(struct v4l2_subdev *sd) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + int ret; + unsigned long expmin, expmax; + + ret = sr030pc30_bulk_write_reg(sd, sr030pc30_base_regs); + if (!ret) { + info->curr_fmt = &sr030pc30_formats[0]; + info->curr_win = &sr030pc30_sizes[0]; + ret = sr030pc30_set_params(sd); + } + if (!ret) + ret = sr030pc30_pwr_ctrl(sd, false, false); + + if (!ret && !info->pdata) + return ret; + + expmin = EXPOS_MIN_MS * info->pdata->clk_rate / (8 * 1000); + expmax = EXPOS_MAX_MS * info->pdata->clk_rate / (8 * 1000); + + v4l2_dbg(1, debug, sd, "%s: expmin= %lx, expmax= %lx", __func__, + expmin, expmax); + + /* Setting up manual exposure time range */ + ret = cam_i2c_write(sd, EXP_MMINH_REG, expmin >> 8 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_MMINL_REG, expmin & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_MMAXH_REG, expmax >> 16 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_MMAXM_REG, expmax >> 8 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_MMAXL_REG, expmax & 0xFF); + + return ret; +} + +static int sr030pc30_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct sr030pc30_info *info = to_sr030pc30(sd); + const struct sr030pc30_platform_data *pdata = info->pdata; + int ret; + + if (pdata == NULL) { + WARN(1, "No platform data!\n"); + return -EINVAL; + } + + /* + * Put sensor into power sleep mode before switching off + * power and disabling MCLK. + */ + if (!on) + sr030pc30_pwr_ctrl(sd, false, true); + + /* set_power controls sensor's power and clock */ + if (pdata->set_power) { + ret = pdata->set_power(&client->dev, on); + if (ret) + return ret; + } + + if (on) { + ret = sr030pc30_base_config(sd); + } else { + ret = 0; + info->curr_win = NULL; + info->curr_fmt = NULL; + } + + return ret; +} + +static const struct v4l2_subdev_core_ops sr030pc30_core_ops = { + .s_power = sr030pc30_s_power, + .queryctrl = sr030pc30_queryctrl, + .s_ctrl = sr030pc30_s_ctrl, + .g_ctrl = sr030pc30_g_ctrl, +}; + +static const struct v4l2_subdev_video_ops sr030pc30_video_ops = { + .g_mbus_fmt = sr030pc30_g_fmt, + .s_mbus_fmt = sr030pc30_s_fmt, + .try_mbus_fmt = sr030pc30_try_fmt, + .enum_mbus_fmt = sr030pc30_enum_fmt, +}; + +static const struct v4l2_subdev_ops sr030pc30_ops = { + .core = &sr030pc30_core_ops, + .video = &sr030pc30_video_ops, +}; + +/* + * Detect sensor type. Return 0 if SR030PC30 was detected + * or -ENODEV otherwise. + */ +static int sr030pc30_detect(struct i2c_client *client) +{ + const struct sr030pc30_platform_data *pdata + = client->dev.platform_data; + int ret; + + /* Enable sensor's power and clock */ + if (pdata->set_power) { + ret = pdata->set_power(&client->dev, 1); + if (ret) + return ret; + } + + ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); + + if (pdata->set_power) + pdata->set_power(&client->dev, 0); + + if (ret < 0) { + dev_err(&client->dev, "%s: I2C read failed\n", __func__); + return ret; + } + + return ret == SR030PC30_ID ? 0 : -ENODEV; +} + + +static int sr030pc30_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sr030pc30_info *info; + struct v4l2_subdev *sd; + const struct sr030pc30_platform_data *pdata + = client->dev.platform_data; + int ret; + + if (!pdata) { + dev_err(&client->dev, "No platform data!"); + return -EIO; + } + + ret = sr030pc30_detect(client); + if (ret) + return ret; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + sd = &info->sd; + strcpy(sd->name, MODULE_NAME); + info->pdata = client->dev.platform_data; + + v4l2_i2c_subdev_init(sd, client, &sr030pc30_ops); + + info->i2c_reg_page = -1; + info->hflip = 1; + info->auto_exp = 1; + info->exposure = 30; + + return 0; +} + +static int sr030pc30_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct sr030pc30_info *info = to_sr030pc30(sd); + + v4l2_device_unregister_subdev(sd); + kfree(info); + return 0; +} + +static const struct i2c_device_id sr030pc30_id[] = { + { MODULE_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sr030pc30_id); + + +static struct i2c_driver sr030pc30_i2c_driver = { + .driver = { + .name = MODULE_NAME + }, + .probe = sr030pc30_probe, + .remove = sr030pc30_remove, + .id_table = sr030pc30_id, +}; + +module_i2c_driver(sr030pc30_i2c_driver); + +MODULE_DESCRIPTION("Siliconfile SR030PC30 camera driver"); +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/tcm825x.c b/drivers/media/i2c/tcm825x.c new file mode 100644 index 00000000..9252529f --- /dev/null +++ b/drivers/media/i2c/tcm825x.c @@ -0,0 +1,937 @@ +/* + * drivers/media/i2c/tcm825x.c + * + * TCM825X camera sensor driver. + * + * Copyright (C) 2007 Nokia Corporation. + * + * Contact: Sakari Ailus + * + * Based on code from David Cohen + * + * This driver was based on ov9640 sensor driver from MontaVista + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include + +#include "tcm825x.h" + +/* + * The sensor has two fps modes: the lower one just gives half the fps + * at the same xclk than the high one. + */ +#define MAX_FPS 30 +#define MIN_FPS 8 +#define MAX_HALF_FPS (MAX_FPS / 2) +#define HIGH_FPS_MODE_LOWER_LIMIT 14 +#define DEFAULT_FPS MAX_HALF_FPS + +struct tcm825x_sensor { + const struct tcm825x_platform_data *platform_data; + struct v4l2_int_device *v4l2_int_device; + struct i2c_client *i2c_client; + struct v4l2_pix_format pix; + struct v4l2_fract timeperframe; +}; + +/* list of image formats supported by TCM825X sensor */ +static const struct v4l2_fmtdesc tcm825x_formats[] = { + { + .description = "YUYV (YUV 4:2:2), packed", + .pixelformat = V4L2_PIX_FMT_UYVY, + }, { + /* Note: V4L2 defines RGB565 as: + * + * Byte 0 Byte 1 + * g2 g1 g0 r4 r3 r2 r1 r0 b4 b3 b2 b1 b0 g5 g4 g3 + * + * We interpret RGB565 as: + * + * Byte 0 Byte 1 + * g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3 + */ + .description = "RGB565, le", + .pixelformat = V4L2_PIX_FMT_RGB565, + }, +}; + +#define TCM825X_NUM_CAPTURE_FORMATS ARRAY_SIZE(tcm825x_formats) + +/* + * TCM825X register configuration for all combinations of pixel format and + * image size + */ +static const struct tcm825x_reg subqcif = { 0x20, TCM825X_PICSIZ }; +static const struct tcm825x_reg qcif = { 0x18, TCM825X_PICSIZ }; +static const struct tcm825x_reg cif = { 0x14, TCM825X_PICSIZ }; +static const struct tcm825x_reg qqvga = { 0x0c, TCM825X_PICSIZ }; +static const struct tcm825x_reg qvga = { 0x04, TCM825X_PICSIZ }; +static const struct tcm825x_reg vga = { 0x00, TCM825X_PICSIZ }; + +static const struct tcm825x_reg yuv422 = { 0x00, TCM825X_PICFMT }; +static const struct tcm825x_reg rgb565 = { 0x02, TCM825X_PICFMT }; + +/* Our own specific controls */ +#define V4L2_CID_ALC V4L2_CID_PRIVATE_BASE +#define V4L2_CID_H_EDGE_EN V4L2_CID_PRIVATE_BASE + 1 +#define V4L2_CID_V_EDGE_EN V4L2_CID_PRIVATE_BASE + 2 +#define V4L2_CID_LENS V4L2_CID_PRIVATE_BASE + 3 +#define V4L2_CID_MAX_EXPOSURE_TIME V4L2_CID_PRIVATE_BASE + 4 +#define V4L2_CID_LAST_PRIV V4L2_CID_MAX_EXPOSURE_TIME + +/* Video controls */ +static struct vcontrol { + struct v4l2_queryctrl qc; + u16 reg; + u16 start_bit; +} video_control[] = { + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 63, + .step = 1, + }, + .reg = TCM825X_AG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = 0, + .maximum = 255, + .step = 1, + }, + .reg = TCM825X_MRG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = 0, + .maximum = 255, + .step = 1, + }, + .reg = TCM825X_MBG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto White Balance", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_AWBSW, + .start_bit = 7, + }, + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure Time", + .minimum = 0, + .maximum = 0x1fff, + .step = 1, + }, + .reg = TCM825X_ESRSPD_U, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror Image", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_H_INV, + .start_bit = 6, + }, + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vertical Flip", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_V_INV, + .start_bit = 7, + }, + /* Private controls */ + { + { + .id = V4L2_CID_ALC, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Luminance Control", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_ALCSW, + .start_bit = 7, + }, + { + { + .id = V4L2_CID_H_EDGE_EN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Horizontal Edge Enhancement", + .minimum = 0, + .maximum = 0xff, + .step = 1, + }, + .reg = TCM825X_HDTG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_V_EDGE_EN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Vertical Edge Enhancement", + .minimum = 0, + .maximum = 0xff, + .step = 1, + }, + .reg = TCM825X_VDTG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_LENS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Lens Shading Compensation", + .minimum = 0, + .maximum = 0x3f, + .step = 1, + }, + .reg = TCM825X_LENS, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_MAX_EXPOSURE_TIME, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Maximum Exposure Time", + .minimum = 0, + .maximum = 0x3, + .step = 1, + }, + .reg = TCM825X_ESRLIM, + .start_bit = 5, + }, +}; + + +static const struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] = +{ &subqcif, &qqvga, &qcif, &qvga, &cif, &vga }; + +static const struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] = +{ &yuv422, &rgb565 }; + +/* + * Read a value from a register in an TCM825X sensor device. The value is + * returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_read_reg(struct i2c_client *client, int reg) +{ + int err; + struct i2c_msg msg[2]; + u8 reg_buf, data_buf = 0; + + if (!client->adapter) + return -ENODEV; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = ®_buf; + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 1; + msg[1].buf = &data_buf; + + reg_buf = reg; + + err = i2c_transfer(client->adapter, msg, 2); + if (err < 0) + return err; + return data_buf; +} + +/* + * Write a value to a register in an TCM825X sensor device. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int err; + struct i2c_msg msg[1]; + unsigned char data[2]; + + if (!client->adapter) + return -ENODEV; + + msg->addr = client->addr; + msg->flags = 0; + msg->len = 2; + msg->buf = data; + data[0] = reg; + data[1] = val; + err = i2c_transfer(client->adapter, msg, 1); + if (err >= 0) + return 0; + return err; +} + +static int __tcm825x_write_reg_mask(struct i2c_client *client, + u8 reg, u8 val, u8 mask) +{ + int rc; + + /* need to do read - modify - write */ + rc = tcm825x_read_reg(client, reg); + if (rc < 0) + return rc; + + rc &= (~mask); /* Clear the masked bits */ + val &= mask; /* Enforce mask on value */ + val |= rc; + + /* write the new value to the register */ + rc = tcm825x_write_reg(client, reg, val); + if (rc) + return rc; + + return 0; +} + +#define tcm825x_write_reg_mask(client, regmask, val) \ + __tcm825x_write_reg_mask(client, TCM825X_ADDR((regmask)), val, \ + TCM825X_MASK((regmask))) + + +/* + * Initialize a list of TCM825X registers. + * The list of registers is terminated by the pair of values + * { TCM825X_REG_TERM, TCM825X_VAL_TERM }. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_write_default_regs(struct i2c_client *client, + const struct tcm825x_reg *reglist) +{ + int err; + const struct tcm825x_reg *next = reglist; + + while (!((next->reg == TCM825X_REG_TERM) + && (next->val == TCM825X_VAL_TERM))) { + err = tcm825x_write_reg(client, next->reg, next->val); + if (err) { + dev_err(&client->dev, "register writing failed\n"); + return err; + } + next++; + } + + return 0; +} + +static struct vcontrol *find_vctrl(int id) +{ + int i; + + if (id < V4L2_CID_BASE) + return NULL; + + for (i = 0; i < ARRAY_SIZE(video_control); i++) + if (video_control[i].qc.id == id) + return &video_control[i]; + + return NULL; +} + +/* + * Find the best match for a requested image capture size. The best match + * is chosen as the nearest match that has the same number or fewer pixels + * as the requested size, or the smallest image size if the requested size + * has fewer pixels than the smallest image. + */ +static enum image_size tcm825x_find_size(struct v4l2_int_device *s, + unsigned int width, + unsigned int height) +{ + enum image_size isize; + unsigned long pixels = width * height; + struct tcm825x_sensor *sensor = s->priv; + + for (isize = subQCIF; isize < VGA; isize++) { + if (tcm825x_sizes[isize + 1].height + * tcm825x_sizes[isize + 1].width > pixels) { + dev_dbg(&sensor->i2c_client->dev, "size %d\n", isize); + + return isize; + } + } + + dev_dbg(&sensor->i2c_client->dev, "format default VGA\n"); + + return VGA; +} + +/* + * Configure the TCM825X for current image size, pixel format, and + * frame period. fper is the frame period (in seconds) expressed as a + * fraction. Returns zero if successful, or non-zero otherwise. The + * actual frame period is returned in fper. + */ +static int tcm825x_configure(struct v4l2_int_device *s) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_pix_format *pix = &sensor->pix; + enum image_size isize = tcm825x_find_size(s, pix->width, pix->height); + struct v4l2_fract *fper = &sensor->timeperframe; + enum pixel_format pfmt; + int err; + u32 tgt_fps; + u8 val; + + /* common register initialization */ + err = tcm825x_write_default_regs( + sensor->i2c_client, sensor->platform_data->default_regs()); + if (err) + return err; + + /* configure image size */ + val = tcm825x_siz_reg[isize]->val; + dev_dbg(&sensor->i2c_client->dev, + "configuring image size %d\n", isize); + err = tcm825x_write_reg_mask(sensor->i2c_client, + tcm825x_siz_reg[isize]->reg, val); + if (err) + return err; + + /* configure pixel format */ + switch (pix->pixelformat) { + default: + case V4L2_PIX_FMT_RGB565: + pfmt = RGB565; + break; + case V4L2_PIX_FMT_UYVY: + pfmt = YUV422; + break; + } + + dev_dbg(&sensor->i2c_client->dev, + "configuring pixel format %d\n", pfmt); + val = tcm825x_fmt_reg[pfmt]->val; + + err = tcm825x_write_reg_mask(sensor->i2c_client, + tcm825x_fmt_reg[pfmt]->reg, val); + if (err) + return err; + + /* + * For frame rate < 15, the FPS reg (addr 0x02, bit 7) must be + * set. Frame rate will be halved from the normal. + */ + tgt_fps = fper->denominator / fper->numerator; + if (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) { + val = tcm825x_read_reg(sensor->i2c_client, 0x02); + val |= 0x80; + tcm825x_write_reg(sensor->i2c_client, 0x02, val); + } + + return 0; +} + +static int ioctl_queryctrl(struct v4l2_int_device *s, + struct v4l2_queryctrl *qc) +{ + struct vcontrol *control; + + control = find_vctrl(qc->id); + + if (control == NULL) + return -EINVAL; + + *qc = control->qc; + + return 0; +} + +static int ioctl_g_ctrl(struct v4l2_int_device *s, + struct v4l2_control *vc) +{ + struct tcm825x_sensor *sensor = s->priv; + struct i2c_client *client = sensor->i2c_client; + int val, r; + struct vcontrol *lvc; + + /* exposure time is special, spread across 2 registers */ + if (vc->id == V4L2_CID_EXPOSURE) { + int val_lower, val_upper; + + val_upper = tcm825x_read_reg(client, + TCM825X_ADDR(TCM825X_ESRSPD_U)); + if (val_upper < 0) + return val_upper; + val_lower = tcm825x_read_reg(client, + TCM825X_ADDR(TCM825X_ESRSPD_L)); + if (val_lower < 0) + return val_lower; + + vc->value = ((val_upper & 0x1f) << 8) | (val_lower); + return 0; + } + + lvc = find_vctrl(vc->id); + if (lvc == NULL) + return -EINVAL; + + r = tcm825x_read_reg(client, TCM825X_ADDR(lvc->reg)); + if (r < 0) + return r; + val = r & TCM825X_MASK(lvc->reg); + val >>= lvc->start_bit; + + if (val < 0) + return val; + + if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP) + val ^= sensor->platform_data->is_upside_down(); + + vc->value = val; + return 0; +} + +static int ioctl_s_ctrl(struct v4l2_int_device *s, + struct v4l2_control *vc) +{ + struct tcm825x_sensor *sensor = s->priv; + struct i2c_client *client = sensor->i2c_client; + struct vcontrol *lvc; + int val = vc->value; + + /* exposure time is special, spread across 2 registers */ + if (vc->id == V4L2_CID_EXPOSURE) { + int val_lower, val_upper; + val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L); + val_upper = (val >> 8) & TCM825X_MASK(TCM825X_ESRSPD_U); + + if (tcm825x_write_reg_mask(client, + TCM825X_ESRSPD_U, val_upper)) + return -EIO; + + if (tcm825x_write_reg_mask(client, + TCM825X_ESRSPD_L, val_lower)) + return -EIO; + + return 0; + } + + lvc = find_vctrl(vc->id); + if (lvc == NULL) + return -EINVAL; + + if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP) + val ^= sensor->platform_data->is_upside_down(); + + val = val << lvc->start_bit; + if (tcm825x_write_reg_mask(client, lvc->reg, val)) + return -EIO; + + return 0; +} + +static int ioctl_enum_fmt_cap(struct v4l2_int_device *s, + struct v4l2_fmtdesc *fmt) +{ + int index = fmt->index; + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (index >= TCM825X_NUM_CAPTURE_FORMATS) + return -EINVAL; + break; + + default: + return -EINVAL; + } + + fmt->flags = tcm825x_formats[index].flags; + strlcpy(fmt->description, tcm825x_formats[index].description, + sizeof(fmt->description)); + fmt->pixelformat = tcm825x_formats[index].pixelformat; + + return 0; +} + +static int ioctl_try_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + enum image_size isize; + int ifmt; + struct v4l2_pix_format *pix = &f->fmt.pix; + + isize = tcm825x_find_size(s, pix->width, pix->height); + dev_dbg(&sensor->i2c_client->dev, "isize = %d num_capture = %lu\n", + isize, (unsigned long)TCM825X_NUM_CAPTURE_FORMATS); + + pix->width = tcm825x_sizes[isize].width; + pix->height = tcm825x_sizes[isize].height; + + for (ifmt = 0; ifmt < TCM825X_NUM_CAPTURE_FORMATS; ifmt++) + if (pix->pixelformat == tcm825x_formats[ifmt].pixelformat) + break; + + if (ifmt == TCM825X_NUM_CAPTURE_FORMATS) + ifmt = 0; /* Default = YUV 4:2:2 */ + + pix->pixelformat = tcm825x_formats[ifmt].pixelformat; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = pix->width * TCM825X_BYTES_PER_PIXEL; + pix->sizeimage = pix->bytesperline * pix->height; + pix->priv = 0; + dev_dbg(&sensor->i2c_client->dev, "format = 0x%08x\n", + pix->pixelformat); + + switch (pix->pixelformat) { + case V4L2_PIX_FMT_UYVY: + default: + pix->colorspace = V4L2_COLORSPACE_JPEG; + break; + case V4L2_PIX_FMT_RGB565: + pix->colorspace = V4L2_COLORSPACE_SRGB; + break; + } + + return 0; +} + +static int ioctl_s_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_pix_format *pix = &f->fmt.pix; + int rval; + + rval = ioctl_try_fmt_cap(s, f); + if (rval) + return rval; + + rval = tcm825x_configure(s); + + sensor->pix = *pix; + + return rval; +} + +static int ioctl_g_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + + f->fmt.pix = sensor->pix; + + return 0; +} + +static int ioctl_g_parm(struct v4l2_int_device *s, + struct v4l2_streamparm *a) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_captureparm *cparm = &a->parm.capture; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(a, 0, sizeof(*a)); + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + cparm->capability = V4L2_CAP_TIMEPERFRAME; + cparm->timeperframe = sensor->timeperframe; + + return 0; +} + +static int ioctl_s_parm(struct v4l2_int_device *s, + struct v4l2_streamparm *a) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_fract *timeperframe = &a->parm.capture.timeperframe; + u32 tgt_fps; /* target frames per secound */ + int rval; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if ((timeperframe->numerator == 0) + || (timeperframe->denominator == 0)) { + timeperframe->denominator = DEFAULT_FPS; + timeperframe->numerator = 1; + } + + tgt_fps = timeperframe->denominator / timeperframe->numerator; + + if (tgt_fps > MAX_FPS) { + timeperframe->denominator = MAX_FPS; + timeperframe->numerator = 1; + } else if (tgt_fps < MIN_FPS) { + timeperframe->denominator = MIN_FPS; + timeperframe->numerator = 1; + } + + sensor->timeperframe = *timeperframe; + + rval = tcm825x_configure(s); + + return rval; +} + +static int ioctl_s_power(struct v4l2_int_device *s, int on) +{ + struct tcm825x_sensor *sensor = s->priv; + + return sensor->platform_data->power_set(on); +} + +/* + * Given the image capture format in pix, the nominal frame period in + * timeperframe, calculate the required xclk frequency. + * + * TCM825X input frequency characteristics are: + * Minimum 11.9 MHz, Typical 24.57 MHz and maximum 25/27 MHz + */ + +static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_fract *timeperframe = &sensor->timeperframe; + u32 tgt_xclk; /* target xclk */ + u32 tgt_fps; /* target frames per secound */ + int rval; + + rval = sensor->platform_data->ifparm(p); + if (rval) + return rval; + + tgt_fps = timeperframe->denominator / timeperframe->numerator; + + tgt_xclk = (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) ? + (2457 * tgt_fps) / MAX_HALF_FPS : + (2457 * tgt_fps) / MAX_FPS; + tgt_xclk *= 10000; + + tgt_xclk = min(tgt_xclk, (u32)TCM825X_XCLK_MAX); + tgt_xclk = max(tgt_xclk, (u32)TCM825X_XCLK_MIN); + + p->u.bt656.clock_curr = tgt_xclk; + + return 0; +} + +static int ioctl_g_needs_reset(struct v4l2_int_device *s, void *buf) +{ + struct tcm825x_sensor *sensor = s->priv; + + return sensor->platform_data->needs_reset(s, buf, &sensor->pix); +} + +static int ioctl_reset(struct v4l2_int_device *s) +{ + return -EBUSY; +} + +static int ioctl_init(struct v4l2_int_device *s) +{ + return tcm825x_configure(s); +} + +static int ioctl_dev_exit(struct v4l2_int_device *s) +{ + return 0; +} + +static int ioctl_dev_init(struct v4l2_int_device *s) +{ + struct tcm825x_sensor *sensor = s->priv; + int r; + + r = tcm825x_read_reg(sensor->i2c_client, 0x01); + if (r < 0) + return r; + if (r == 0) { + dev_err(&sensor->i2c_client->dev, "device not detected\n"); + return -EIO; + } + return 0; +} + +static struct v4l2_int_ioctl_desc tcm825x_ioctl_desc[] = { + { vidioc_int_dev_init_num, + (v4l2_int_ioctl_func *)ioctl_dev_init }, + { vidioc_int_dev_exit_num, + (v4l2_int_ioctl_func *)ioctl_dev_exit }, + { vidioc_int_s_power_num, + (v4l2_int_ioctl_func *)ioctl_s_power }, + { vidioc_int_g_ifparm_num, + (v4l2_int_ioctl_func *)ioctl_g_ifparm }, + { vidioc_int_g_needs_reset_num, + (v4l2_int_ioctl_func *)ioctl_g_needs_reset }, + { vidioc_int_reset_num, + (v4l2_int_ioctl_func *)ioctl_reset }, + { vidioc_int_init_num, + (v4l2_int_ioctl_func *)ioctl_init }, + { vidioc_int_enum_fmt_cap_num, + (v4l2_int_ioctl_func *)ioctl_enum_fmt_cap }, + { vidioc_int_try_fmt_cap_num, + (v4l2_int_ioctl_func *)ioctl_try_fmt_cap }, + { vidioc_int_g_fmt_cap_num, + (v4l2_int_ioctl_func *)ioctl_g_fmt_cap }, + { vidioc_int_s_fmt_cap_num, + (v4l2_int_ioctl_func *)ioctl_s_fmt_cap }, + { vidioc_int_g_parm_num, + (v4l2_int_ioctl_func *)ioctl_g_parm }, + { vidioc_int_s_parm_num, + (v4l2_int_ioctl_func *)ioctl_s_parm }, + { vidioc_int_queryctrl_num, + (v4l2_int_ioctl_func *)ioctl_queryctrl }, + { vidioc_int_g_ctrl_num, + (v4l2_int_ioctl_func *)ioctl_g_ctrl }, + { vidioc_int_s_ctrl_num, + (v4l2_int_ioctl_func *)ioctl_s_ctrl }, +}; + +static struct v4l2_int_slave tcm825x_slave = { + .ioctls = tcm825x_ioctl_desc, + .num_ioctls = ARRAY_SIZE(tcm825x_ioctl_desc), +}; + +static struct tcm825x_sensor tcm825x; + +static struct v4l2_int_device tcm825x_int_device = { + .module = THIS_MODULE, + .name = TCM825X_NAME, + .priv = &tcm825x, + .type = v4l2_int_type_slave, + .u = { + .slave = &tcm825x_slave, + }, +}; + +static int tcm825x_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct tcm825x_sensor *sensor = &tcm825x; + + if (i2c_get_clientdata(client)) + return -EBUSY; + + sensor->platform_data = client->dev.platform_data; + + if (sensor->platform_data == NULL + || !sensor->platform_data->is_okay()) + return -ENODEV; + + sensor->v4l2_int_device = &tcm825x_int_device; + + sensor->i2c_client = client; + i2c_set_clientdata(client, sensor); + + /* Make the default capture format QVGA RGB565 */ + sensor->pix.width = tcm825x_sizes[QVGA].width; + sensor->pix.height = tcm825x_sizes[QVGA].height; + sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565; + + return v4l2_int_device_register(sensor->v4l2_int_device); +} + +static int tcm825x_remove(struct i2c_client *client) +{ + struct tcm825x_sensor *sensor = i2c_get_clientdata(client); + + if (!client->adapter) + return -ENODEV; /* our client isn't attached */ + + v4l2_int_device_unregister(sensor->v4l2_int_device); + + return 0; +} + +static const struct i2c_device_id tcm825x_id[] = { + { "tcm825x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tcm825x_id); + +static struct i2c_driver tcm825x_i2c_driver = { + .driver = { + .name = TCM825X_NAME, + }, + .probe = tcm825x_probe, + .remove = tcm825x_remove, + .id_table = tcm825x_id, +}; + +static struct tcm825x_sensor tcm825x = { + .timeperframe = { + .numerator = 1, + .denominator = DEFAULT_FPS, + }, +}; + +static int __init tcm825x_init(void) +{ + int rval; + + rval = i2c_add_driver(&tcm825x_i2c_driver); + if (rval) + printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n", + __func__); + + return rval; +} + +static void __exit tcm825x_exit(void) +{ + i2c_del_driver(&tcm825x_i2c_driver); +} + +/* + * FIXME: Menelaus isn't ready (?) at module_init stage, so use + * late_initcall for now. + */ +late_initcall(tcm825x_init); +module_exit(tcm825x_exit); + +MODULE_AUTHOR("Sakari Ailus "); +MODULE_DESCRIPTION("TCM825x camera sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/tcm825x.h b/drivers/media/i2c/tcm825x.h new file mode 100644 index 00000000..8ebab953 --- /dev/null +++ b/drivers/media/i2c/tcm825x.h @@ -0,0 +1,200 @@ +/* + * drivers/media/i2c/tcm825x.h + * + * Register definitions for the TCM825X CameraChip. + * + * Author: David Cohen (david.cohen@indt.org.br) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + * This file was based on ov9640.h from MontaVista + */ + +#ifndef TCM825X_H +#define TCM825X_H + +#include + +#include + +#define TCM825X_NAME "tcm825x" + +#define TCM825X_MASK(x) x & 0x00ff +#define TCM825X_ADDR(x) (x & 0xff00) >> 8 + +/* The TCM825X I2C sensor chip has a fixed slave address of 0x3d. */ +#define TCM825X_I2C_ADDR 0x3d + +/* + * define register offsets for the TCM825X sensor chip + * OFFSET(8 bits) + MASK(8 bits) + * MASK bit 4 and 3 are used when the register uses more than one address + */ +#define TCM825X_FPS 0x0280 +#define TCM825X_ACF 0x0240 +#define TCM825X_DOUTBUF 0x020C +#define TCM825X_DCLKP 0x0202 +#define TCM825X_ACFDET 0x0201 +#define TCM825X_DOUTSW 0x0380 +#define TCM825X_DATAHZ 0x0340 +#define TCM825X_PICSIZ 0x033c +#define TCM825X_PICFMT 0x0302 +#define TCM825X_V_INV 0x0480 +#define TCM825X_H_INV 0x0440 +#define TCM825X_ESRLSW 0x0430 +#define TCM825X_V_LENGTH 0x040F +#define TCM825X_ALCSW 0x0580 +#define TCM825X_ESRLIM 0x0560 +#define TCM825X_ESRSPD_U 0x051F +#define TCM825X_ESRSPD_L 0x06FF +#define TCM825X_AG 0x07FF +#define TCM825X_ESRSPD2 0x06FF +#define TCM825X_ALCMODE 0x0830 +#define TCM825X_ALCH 0x080F +#define TCM825X_ALCL 0x09FF +#define TCM825X_AWBSW 0x0A80 +#define TCM825X_MRG 0x0BFF +#define TCM825X_MBG 0x0CFF +#define TCM825X_GAMSW 0x0D80 +#define TCM825X_HDTG 0x0EFF +#define TCM825X_VDTG 0x0FFF +#define TCM825X_HDTCORE 0x10F0 +#define TCM825X_VDTCORE 0x100F +#define TCM825X_CONT 0x11FF +#define TCM825X_BRIGHT 0x12FF +#define TCM825X_VHUE 0x137F +#define TCM825X_UHUE 0x147F +#define TCM825X_VGAIN 0x153F +#define TCM825X_UGAIN 0x163F +#define TCM825X_UVCORE 0x170F +#define TCM825X_SATU 0x187F +#define TCM825X_MHMODE 0x1980 +#define TCM825X_MHLPFSEL 0x1940 +#define TCM825X_YMODE 0x1930 +#define TCM825X_MIXHG 0x1907 +#define TCM825X_LENS 0x1A3F +#define TCM825X_AGLIM 0x1BE0 +#define TCM825X_LENSRPOL 0x1B10 +#define TCM825X_LENSRGAIN 0x1B0F +#define TCM825X_ES100S 0x1CFF +#define TCM825X_ES120S 0x1DFF +#define TCM825X_DMASK 0x1EC0 +#define TCM825X_CODESW 0x1E20 +#define TCM825X_CODESEL 0x1E10 +#define TCM825X_TESPIC 0x1E04 +#define TCM825X_PICSEL 0x1E03 +#define TCM825X_HNUM 0x20FF +#define TCM825X_VOUTPH 0x287F +#define TCM825X_ESROUT 0x327F +#define TCM825X_ESROUT2 0x33FF +#define TCM825X_AGOUT 0x34FF +#define TCM825X_DGOUT 0x353F +#define TCM825X_AGSLOW1 0x39C0 +#define TCM825X_FLLSMODE 0x3930 +#define TCM825X_FLLSLIM 0x390F +#define TCM825X_DETSEL 0x3AF0 +#define TCM825X_ACDETNC 0x3A0F +#define TCM825X_AGSLOW2 0x3BC0 +#define TCM825X_DG 0x3B3F +#define TCM825X_REJHLEV 0x3CFF +#define TCM825X_ALCLOCK 0x3D80 +#define TCM825X_FPSLNKSW 0x3D40 +#define TCM825X_ALCSPD 0x3D30 +#define TCM825X_REJH 0x3D03 +#define TCM825X_SHESRSW 0x3E80 +#define TCM825X_ESLIMSEL 0x3E40 +#define TCM825X_SHESRSPD 0x3E30 +#define TCM825X_ELSTEP 0x3E0C +#define TCM825X_ELSTART 0x3E03 +#define TCM825X_AGMIN 0x3FFF +#define TCM825X_PREGRG 0x423F +#define TCM825X_PREGBG 0x433F +#define TCM825X_PRERG 0x443F +#define TCM825X_PREBG 0x453F +#define TCM825X_MSKBR 0x477F +#define TCM825X_MSKGR 0x487F +#define TCM825X_MSKRB 0x497F +#define TCM825X_MSKGB 0x4A7F +#define TCM825X_MSKRG 0x4B7F +#define TCM825X_MSKBG 0x4C7F +#define TCM825X_HDTCSW 0x4D80 +#define TCM825X_VDTCSW 0x4D40 +#define TCM825X_DTCYL 0x4D3F +#define TCM825X_HDTPSW 0x4E80 +#define TCM825X_VDTPSW 0x4E40 +#define TCM825X_DTCGAIN 0x4E3F +#define TCM825X_DTLLIMSW 0x4F10 +#define TCM825X_DTLYLIM 0x4F0F +#define TCM825X_YLCUTLMSK 0x5080 +#define TCM825X_YLCUTL 0x503F +#define TCM825X_YLCUTHMSK 0x5180 +#define TCM825X_YLCUTH 0x513F +#define TCM825X_UVSKNC 0x527F +#define TCM825X_UVLJ 0x537F +#define TCM825X_WBGMIN 0x54FF +#define TCM825X_WBGMAX 0x55FF +#define TCM825X_WBSPDUP 0x5603 +#define TCM825X_ALLAREA 0x5820 +#define TCM825X_WBLOCK 0x5810 +#define TCM825X_WB2SP 0x580F +#define TCM825X_KIZUSW 0x5920 +#define TCM825X_PBRSW 0x5910 +#define TCM825X_ABCSW 0x5903 +#define TCM825X_PBDLV 0x5AFF +#define TCM825X_PBC1LV 0x5BFF + +#define TCM825X_NUM_REGS (TCM825X_ADDR(TCM825X_PBC1LV) + 1) + +#define TCM825X_BYTES_PER_PIXEL 2 + +#define TCM825X_REG_TERM 0xff /* terminating list entry for reg */ +#define TCM825X_VAL_TERM 0xff /* terminating list entry for val */ + +/* define a structure for tcm825x register initialization values */ +struct tcm825x_reg { + u8 val; + u16 reg; +}; + +enum image_size { subQCIF = 0, QQVGA, QCIF, QVGA, CIF, VGA }; +enum pixel_format { YUV422 = 0, RGB565 }; +#define NUM_IMAGE_SIZES 6 +#define NUM_PIXEL_FORMATS 2 + +#define TCM825X_XCLK_MIN 11900000 +#define TCM825X_XCLK_MAX 25000000 + +struct capture_size { + unsigned long width; + unsigned long height; +}; + +struct tcm825x_platform_data { + /* Is the sensor usable? Doesn't yet mean it's there, but you + * can try! */ + int (*is_okay)(void); + /* Set power state, zero is off, non-zero is on. */ + int (*power_set)(int power); + /* Default registers written after power-on or reset. */ + const struct tcm825x_reg *(*default_regs)(void); + int (*needs_reset)(struct v4l2_int_device *s, void *buf, + struct v4l2_pix_format *fmt); + int (*ifparm)(struct v4l2_ifparm *p); + int (*is_upside_down)(void); +}; + +/* Array of image sizes supported by TCM825X. These must be ordered from + * smallest image size to largest. + */ +static const struct capture_size tcm825x_sizes[] = { + { 128, 96 }, /* subQCIF */ + { 160, 120 }, /* QQVGA */ + { 176, 144 }, /* QCIF */ + { 320, 240 }, /* QVGA */ + { 352, 288 }, /* CIF */ + { 640, 480 }, /* VGA */ +}; + +#endif /* ifndef TCM825X_H */ diff --git a/drivers/media/i2c/tda7432.c b/drivers/media/i2c/tda7432.c new file mode 100644 index 00000000..09f4387d --- /dev/null +++ b/drivers/media/i2c/tda7432.c @@ -0,0 +1,429 @@ +/* + * For the STS-Thompson TDA7432 audio processor chip + * + * Handles audio functions: volume, balance, tone, loudness + * This driver will not complain if used with any + * other i2c device with the same address. + * + * Muting and tone control by Jonathan Isom + * + * Copyright (c) 2000 Eric Sandeen + * Copyright (c) 2006 Mauro Carvalho Chehab + * This code is placed under the terms of the GNU General Public License + * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) + * Which was based on tda8425.c by Greg Alexander (c) 1998 + * + * OPTIONS: + * debug - set to 1 if you'd like to see debug messages + * set to 2 if you'd like to be inundated with debug messages + * + * loudness - set between 0 and 15 for varying degrees of loudness effect + * + * maxvol - set maximium volume to +20db (1), default is 0db(0) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#ifndef VIDEO_AUDIO_BALANCE +# define VIDEO_AUDIO_BALANCE 32 +#endif + +MODULE_AUTHOR("Eric Sandeen "); +MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip"); +MODULE_LICENSE("GPL"); + +static int maxvol; +static int loudness; /* disable loudness by default */ +static int debug; /* insmod parameter */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0)."); +module_param(loudness, int, S_IRUGO); +MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0)."); +module_param(maxvol, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0)."); + + +/* Structure of address and subaddresses for the tda7432 */ + +struct tda7432 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct { + /* bass/treble cluster */ + struct v4l2_ctrl *bass; + struct v4l2_ctrl *treble; + }; + struct { + /* mute/balance cluster */ + struct v4l2_ctrl *mute; + struct v4l2_ctrl *balance; + }; +}; + +static inline struct tda7432 *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tda7432, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tda7432, hdl)->sd; +} + +/* The TDA7432 is made by STS-Thompson + * http://www.st.com + * http://us.st.com/stonline/books/pdf/docs/4056.pdf + * + * TDA7432: I2C-bus controlled basic audio processor + * + * The TDA7432 controls basic audio functions like volume, balance, + * and tone control (including loudness). It also has four channel + * output (for front and rear). Since most vidcap cards probably + * don't have 4 channel output, this driver will set front & rear + * together (no independent control). + */ + + /* Subaddresses for TDA7432 */ + +#define TDA7432_IN 0x00 /* Input select */ +#define TDA7432_VL 0x01 /* Volume */ +#define TDA7432_TN 0x02 /* Bass, Treble (Tone) */ +#define TDA7432_LF 0x03 /* Attenuation LF (Left Front) */ +#define TDA7432_LR 0x04 /* Attenuation LR (Left Rear) */ +#define TDA7432_RF 0x05 /* Attenuation RF (Right Front) */ +#define TDA7432_RR 0x06 /* Attenuation RR (Right Rear) */ +#define TDA7432_LD 0x07 /* Loudness */ + + + /* Masks for bits in TDA7432 subaddresses */ + +/* Many of these not used - just for documentation */ + +/* Subaddress 0x00 - Input selection and bass control */ + +/* Bits 0,1,2 control input: + * 0x00 - Stereo input + * 0x02 - Mono input + * 0x03 - Mute (Using Attenuators Plays better with modules) + * Mono probably isn't used - I'm guessing only the stereo + * input is connected on most cards, so we'll set it to stereo. + * + * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut + * Bit 4 controls bass range: 0/1 is extended/standard bass range + * + * Highest 3 bits not used + */ + +#define TDA7432_STEREO_IN 0 +#define TDA7432_MONO_IN 2 /* Probably won't be used */ +#define TDA7432_BASS_SYM 1 << 3 +#define TDA7432_BASS_NORM 1 << 4 + +/* Subaddress 0x01 - Volume */ + +/* Lower 7 bits control volume from -79dB to +32dB in 1dB steps + * Recommended maximum is +20 dB + * + * +32dB: 0x00 + * +20dB: 0x0c + * 0dB: 0x20 + * -79dB: 0x6f + * + * MSB (bit 7) controls loudness: 1/0 is loudness on/off + */ + +#define TDA7432_VOL_0DB 0x20 +#define TDA7432_LD_ON 1 << 7 + + +/* Subaddress 0x02 - Tone control */ + +/* Bits 0,1,2 control absolute treble gain from 0dB to 14dB + * 0x0 is 14dB, 0x7 is 0dB + * + * Bit 3 controls treble attenuation/gain (sign) + * 1 = gain (+) + * 0 = attenuation (-) + * + * Bits 4,5,6 control absolute bass gain from 0dB to 14dB + * (This is only true for normal base range, set in 0x00) + * 0x0 << 4 is 14dB, 0x7 is 0dB + * + * Bit 7 controls bass attenuation/gain (sign) + * 1 << 7 = gain (+) + * 0 << 7 = attenuation (-) + * + * Example: + * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble + */ + +#define TDA7432_TREBLE_0DB 0xf +#define TDA7432_TREBLE 7 +#define TDA7432_TREBLE_GAIN 1 << 3 +#define TDA7432_BASS_0DB 0xf +#define TDA7432_BASS 7 << 4 +#define TDA7432_BASS_GAIN 1 << 7 + + +/* Subaddress 0x03 - Left Front attenuation */ +/* Subaddress 0x04 - Left Rear attenuation */ +/* Subaddress 0x05 - Right Front attenuation */ +/* Subaddress 0x06 - Right Rear attenuation */ + +/* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB + * in 1.5dB steps. + * + * 0x00 is 0dB + * 0x1f is -37.5dB + * + * Bit 5 mutes that channel when set (1 = mute, 0 = unmute) + * We'll use the mute on the input, though (above) + * Bits 6,7 unused + */ + +#define TDA7432_ATTEN_0DB 0x00 +#define TDA7432_MUTE 0x1 << 5 + + +/* Subaddress 0x07 - Loudness Control */ + +/* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps + * when bit 4 is NOT set + * + * 0x0 is 0dB + * 0xf is -15dB + * + * If bit 4 is set, then there is a flat attenuation according to + * the lower 4 bits, as above. + * + * Bits 5,6,7 unused + */ + + + +/* Begin code */ + +static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + unsigned char buffer[2]; + + v4l2_dbg(2, debug, sd, "In tda7432_write\n"); + v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val); + buffer[0] = subaddr; + buffer[1] = val; + if (2 != i2c_master_send(client, buffer, 2)) { + v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n", + subaddr, val); + return -1; + } + return 0; +} + +static int tda7432_set(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + unsigned char buf[16]; + + buf[0] = TDA7432_IN; + buf[1] = TDA7432_STEREO_IN | /* Main (stereo) input */ + TDA7432_BASS_SYM | /* Symmetric bass cut */ + TDA7432_BASS_NORM; /* Normal bass range */ + buf[2] = 0x3b; + if (loudness) /* Turn loudness on? */ + buf[2] |= TDA7432_LD_ON; + buf[3] = TDA7432_TREBLE_0DB | (TDA7432_BASS_0DB << 4); + buf[4] = TDA7432_ATTEN_0DB; + buf[5] = TDA7432_ATTEN_0DB; + buf[6] = TDA7432_ATTEN_0DB; + buf[7] = TDA7432_ATTEN_0DB; + buf[8] = loudness; + if (9 != i2c_master_send(client, buf, 9)) { + v4l2_err(sd, "I/O error, trying tda7432_set\n"); + return -1; + } + + return 0; +} + +static int tda7432_log_status(struct v4l2_subdev *sd) +{ + struct tda7432 *state = to_state(sd); + + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +static int tda7432_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct tda7432 *t = to_state(sd); + u8 bass, treble, volume; + u8 lf, lr, rf, rr; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (t->balance->val < 0) { + /* shifted to left, attenuate right */ + rr = rf = -t->balance->val; + lr = lf = TDA7432_ATTEN_0DB; + } else if (t->balance->val > 0) { + /* shifted to right, attenuate left */ + rr = rf = TDA7432_ATTEN_0DB; + lr = lf = t->balance->val; + } else { + /* centered */ + rr = rf = TDA7432_ATTEN_0DB; + lr = lf = TDA7432_ATTEN_0DB; + } + if (t->mute->val) { + lf |= TDA7432_MUTE; + lr |= TDA7432_MUTE; + rf |= TDA7432_MUTE; + rr |= TDA7432_MUTE; + } + /* Mute & update balance*/ + tda7432_write(sd, TDA7432_LF, lf); + tda7432_write(sd, TDA7432_LR, lr); + tda7432_write(sd, TDA7432_RF, rf); + tda7432_write(sd, TDA7432_RR, rr); + return 0; + case V4L2_CID_AUDIO_VOLUME: + volume = 0x6f - ctrl->val; + if (loudness) /* Turn on the loudness bit */ + volume |= TDA7432_LD_ON; + + tda7432_write(sd, TDA7432_VL, volume); + return 0; + case V4L2_CID_AUDIO_BASS: + bass = t->bass->val; + treble = t->treble->val; + if (bass >= 0x8) + bass = 14 - (bass - 8); + if (treble >= 0x8) + treble = 14 - (treble - 8); + + tda7432_write(sd, TDA7432_TN, 0x10 | (bass << 4) | treble); + return 0; + } + return -EINVAL; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops tda7432_ctrl_ops = { + .s_ctrl = tda7432_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tda7432_core_ops = { + .log_status = tda7432_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_ops tda7432_ops = { + .core = &tda7432_core_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* *********************** * + * i2c interface functions * + * *********************** */ + +static int tda7432_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tda7432 *t; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + t = kzalloc(sizeof(*t), GFP_KERNEL); + if (!t) + return -ENOMEM; + sd = &t->sd; + v4l2_i2c_subdev_init(sd, client, &tda7432_ops); + v4l2_ctrl_handler_init(&t->hdl, 5); + v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, maxvol ? 0x68 : 0x4f, 1, maxvol ? 0x5d : 0x47); + t->mute = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + t->balance = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, -31, 31, 1, 0); + t->bass = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_BASS, 0, 14, 1, 7); + t->treble = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, 0, 14, 1, 7); + sd->ctrl_handler = &t->hdl; + if (t->hdl.error) { + int err = t->hdl.error; + + v4l2_ctrl_handler_free(&t->hdl); + kfree(t); + return err; + } + v4l2_ctrl_cluster(2, &t->bass); + v4l2_ctrl_cluster(2, &t->mute); + v4l2_ctrl_handler_setup(&t->hdl); + if (loudness < 0 || loudness > 15) { + v4l2_warn(sd, "loudness parameter must be between 0 and 15\n"); + if (loudness < 0) + loudness = 0; + if (loudness > 15) + loudness = 15; + } + + tda7432_set(sd); + return 0; +} + +static int tda7432_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tda7432 *t = to_state(sd); + + tda7432_set(sd); + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&t->hdl); + kfree(t); + return 0; +} + +static const struct i2c_device_id tda7432_id[] = { + { "tda7432", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tda7432_id); + +static struct i2c_driver tda7432_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tda7432", + }, + .probe = tda7432_probe, + .remove = tda7432_remove, + .id_table = tda7432_id, +}; + +module_i2c_driver(tda7432_driver); diff --git a/drivers/media/i2c/tda9840.c b/drivers/media/i2c/tda9840.c new file mode 100644 index 00000000..01441e35 --- /dev/null +++ b/drivers/media/i2c/tda9840.c @@ -0,0 +1,224 @@ + /* + tda9840 - i2c-driver for the tda9840 by SGS Thomson + + Copyright (C) 1998-2003 Michael Hunold + Copyright (C) 2008 Hans Verkuil + + The tda9840 is a stereo/dual sound processor with digital + identification. It can be found at address 0x84 on the i2c-bus. + + For detailed informations download the specifications directly + from SGS Thomson at http://www.st.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Michael Hunold "); +MODULE_DESCRIPTION("tda9840 driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#define SWITCH 0x00 +#define LEVEL_ADJUST 0x02 +#define STEREO_ADJUST 0x03 +#define TEST 0x04 + +#define TDA9840_SET_MUTE 0x00 +#define TDA9840_SET_MONO 0x10 +#define TDA9840_SET_STEREO 0x2a +#define TDA9840_SET_LANG1 0x12 +#define TDA9840_SET_LANG2 0x1e +#define TDA9840_SET_BOTH 0x1a +#define TDA9840_SET_BOTH_R 0x16 +#define TDA9840_SET_EXTERNAL 0x7a + + +static void tda9840_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (i2c_smbus_write_byte_data(client, reg, val)) + v4l2_dbg(1, debug, sd, "error writing %02x to %02x\n", + val, reg); +} + +static int tda9840_status(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 byte; + + if (1 != i2c_master_recv(client, &byte, 1)) { + v4l2_dbg(1, debug, sd, + "i2c_master_recv() failed\n"); + return -EIO; + } + + if (byte & 0x80) { + v4l2_dbg(1, debug, sd, + "TDA9840_DETECT: register contents invalid\n"); + return -EINVAL; + } + + v4l2_dbg(1, debug, sd, "TDA9840_DETECT: byte: 0x%02x\n", byte); + return byte & 0x60; +} + +static int tda9840_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *t) +{ + int stat = tda9840_status(sd); + int byte; + + if (t->index) + return -EINVAL; + + stat = stat < 0 ? 0 : stat; + if (stat == 0 || stat == 0x60) /* mono input */ + byte = TDA9840_SET_MONO; + else if (stat == 0x40) /* stereo input */ + byte = (t->audmode == V4L2_TUNER_MODE_MONO) ? + TDA9840_SET_MONO : TDA9840_SET_STEREO; + else { /* bilingual */ + switch (t->audmode) { + case V4L2_TUNER_MODE_LANG1_LANG2: + byte = TDA9840_SET_BOTH; + break; + case V4L2_TUNER_MODE_LANG2: + byte = TDA9840_SET_LANG2; + break; + default: + byte = TDA9840_SET_LANG1; + break; + } + } + v4l2_dbg(1, debug, sd, "TDA9840_SWITCH: 0x%02x\n", byte); + tda9840_write(sd, SWITCH, byte); + return 0; +} + +static int tda9840_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *t) +{ + int stat = tda9840_status(sd); + + if (stat < 0) + return stat; + + t->rxsubchans = V4L2_TUNER_SUB_MONO; + + switch (stat & 0x60) { + case 0x00: + t->rxsubchans = V4L2_TUNER_SUB_MONO; + break; + case 0x20: + t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + break; + case 0x40: + t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; + break; + default: /* Incorrect detect */ + t->rxsubchans = V4L2_TUNER_MODE_MONO; + break; + } + return 0; +} + +static int tda9840_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TDA9840, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops tda9840_core_ops = { + .g_chip_ident = tda9840_g_chip_ident, +}; + +static const struct v4l2_subdev_tuner_ops tda9840_tuner_ops = { + .s_tuner = tda9840_s_tuner, + .g_tuner = tda9840_g_tuner, +}; + +static const struct v4l2_subdev_ops tda9840_ops = { + .core = &tda9840_core_ops, + .tuner = &tda9840_tuner_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int tda9840_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + v4l2_i2c_subdev_init(sd, client, &tda9840_ops); + + /* set initial values for level & stereo - adjustment, mode */ + tda9840_write(sd, LEVEL_ADJUST, 0); + tda9840_write(sd, STEREO_ADJUST, 0); + tda9840_write(sd, SWITCH, TDA9840_SET_STEREO); + return 0; +} + +static int tda9840_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + return 0; +} + +static const struct i2c_device_id tda9840_id[] = { + { "tda9840", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tda9840_id); + +static struct i2c_driver tda9840_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tda9840", + }, + .probe = tda9840_probe, + .remove = tda9840_remove, + .id_table = tda9840_id, +}; + +module_i2c_driver(tda9840_driver); diff --git a/drivers/media/i2c/tea6415c.c b/drivers/media/i2c/tea6415c.c new file mode 100644 index 00000000..3d5b06a5 --- /dev/null +++ b/drivers/media/i2c/tea6415c.c @@ -0,0 +1,187 @@ + /* + tea6415c - i2c-driver for the tea6415c by SGS Thomson + + Copyright (C) 1998-2003 Michael Hunold + Copyright (C) 2008 Hans Verkuil + + The tea6415c is a bus controlled video-matrix-switch + with 8 inputs and 6 outputs. + It is cascadable, i.e. it can be found at the addresses + 0x86 and 0x06 on the i2c-bus. + + For detailed informations download the specifications directly + from SGS Thomson at http://www.st.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License vs published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include "tea6415c.h" + +MODULE_AUTHOR("Michael Hunold "); +MODULE_DESCRIPTION("tea6415c driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* makes a connection between the input-pin 'i' and the output-pin 'o' */ +static int tea6415c_s_routing(struct v4l2_subdev *sd, + u32 i, u32 o, u32 config) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 byte = 0; + int ret; + + v4l2_dbg(1, debug, sd, "i=%d, o=%d\n", i, o); + + /* check if the pins are valid */ + if (0 == ((1 == i || 3 == i || 5 == i || 6 == i || 8 == i || 10 == i || 20 == i || 11 == i) + && (18 == o || 17 == o || 16 == o || 15 == o || 14 == o || 13 == o))) + return -EINVAL; + + /* to understand this, have a look at the tea6415c-specs (p.5) */ + switch (o) { + case 18: + byte = 0x00; + break; + case 14: + byte = 0x20; + break; + case 16: + byte = 0x10; + break; + case 17: + byte = 0x08; + break; + case 15: + byte = 0x18; + break; + case 13: + byte = 0x28; + break; + } + + switch (i) { + case 5: + byte |= 0x00; + break; + case 8: + byte |= 0x04; + break; + case 3: + byte |= 0x02; + break; + case 20: + byte |= 0x06; + break; + case 6: + byte |= 0x01; + break; + case 10: + byte |= 0x05; + break; + case 1: + byte |= 0x03; + break; + case 11: + byte |= 0x07; + break; + } + + ret = i2c_smbus_write_byte(client, byte); + if (ret) { + v4l2_dbg(1, debug, sd, + "i2c_smbus_write_byte() failed, ret:%d\n", ret); + return -EIO; + } + return ret; +} + +static int tea6415c_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TEA6415C, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops tea6415c_core_ops = { + .g_chip_ident = tea6415c_g_chip_ident, +}; + +static const struct v4l2_subdev_video_ops tea6415c_video_ops = { + .s_routing = tea6415c_s_routing, +}; + +static const struct v4l2_subdev_ops tea6415c_ops = { + .core = &tea6415c_core_ops, + .video = &tea6415c_video_ops, +}; + +static int tea6415c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + v4l2_i2c_subdev_init(sd, client, &tea6415c_ops); + return 0; +} + +static int tea6415c_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + return 0; +} + +static const struct i2c_device_id tea6415c_id[] = { + { "tea6415c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tea6415c_id); + +static struct i2c_driver tea6415c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tea6415c", + }, + .probe = tea6415c_probe, + .remove = tea6415c_remove, + .id_table = tea6415c_id, +}; + +module_i2c_driver(tea6415c_driver); diff --git a/drivers/media/i2c/tea6415c.h b/drivers/media/i2c/tea6415c.h new file mode 100644 index 00000000..3a47d697 --- /dev/null +++ b/drivers/media/i2c/tea6415c.h @@ -0,0 +1,27 @@ +#ifndef __INCLUDED_TEA6415C__ +#define __INCLUDED_TEA6415C__ + +/* the tea6415c's design is quite brain-dead. although there are + 8 inputs and 6 outputs, these aren't enumerated in any way. because + I don't want to say "connect input pin 20 to output pin 17", I define + a "virtual" pin-order. */ + +/* input pins */ +#define TEA6415C_OUTPUT1 18 +#define TEA6415C_OUTPUT2 14 +#define TEA6415C_OUTPUT3 16 +#define TEA6415C_OUTPUT4 17 +#define TEA6415C_OUTPUT5 13 +#define TEA6415C_OUTPUT6 15 + +/* output pins */ +#define TEA6415C_INPUT1 5 +#define TEA6415C_INPUT2 8 +#define TEA6415C_INPUT3 3 +#define TEA6415C_INPUT4 20 +#define TEA6415C_INPUT5 6 +#define TEA6415C_INPUT6 10 +#define TEA6415C_INPUT7 1 +#define TEA6415C_INPUT8 11 + +#endif diff --git a/drivers/media/i2c/tea6420.c b/drivers/media/i2c/tea6420.c new file mode 100644 index 00000000..38757217 --- /dev/null +++ b/drivers/media/i2c/tea6420.c @@ -0,0 +1,169 @@ + /* + tea6420 - i2c-driver for the tea6420 by SGS Thomson + + Copyright (C) 1998-2003 Michael Hunold + Copyright (C) 2008 Hans Verkuil + + The tea6420 is a bus controlled audio-matrix with 5 stereo inputs, + 4 stereo outputs and gain control for each output. + It is cascadable, i.e. it can be found at the addresses 0x98 + and 0x9a on the i2c-bus. + + For detailed informations download the specifications directly + from SGS Thomson at http://www.st.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include "tea6420.h" + +MODULE_AUTHOR("Michael Hunold "); +MODULE_DESCRIPTION("tea6420 driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* make a connection between the input 'i' and the output 'o' + with gain 'g' (note: i = 6 means 'mute') */ +static int tea6420_s_routing(struct v4l2_subdev *sd, + u32 i, u32 o, u32 config) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int g = (o >> 4) & 0xf; + u8 byte; + int ret; + + o &= 0xf; + v4l2_dbg(1, debug, sd, "i=%d, o=%d, g=%d\n", i, o, g); + + /* check if the parameters are valid */ + if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0) + return -EINVAL; + + byte = ((o - 1) << 5); + byte |= (i - 1); + + /* to understand this, have a look at the tea6420-specs (p.5) */ + switch (g) { + case 0: + byte |= (3 << 3); + break; + case 2: + byte |= (2 << 3); + break; + case 4: + byte |= (1 << 3); + break; + case 6: + break; + } + + ret = i2c_smbus_write_byte(client, byte); + if (ret) { + v4l2_dbg(1, debug, sd, + "i2c_smbus_write_byte() failed, ret:%d\n", ret); + return -EIO; + } + return 0; +} + +static int tea6420_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TEA6420, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops tea6420_core_ops = { + .g_chip_ident = tea6420_g_chip_ident, +}; + +static const struct v4l2_subdev_audio_ops tea6420_audio_ops = { + .s_routing = tea6420_s_routing, +}; + +static const struct v4l2_subdev_ops tea6420_ops = { + .core = &tea6420_core_ops, + .audio = &tea6420_audio_ops, +}; + +static int tea6420_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + int err, i; + + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + v4l2_i2c_subdev_init(sd, client, &tea6420_ops); + + /* set initial values: set "mute"-input to all outputs at gain 0 */ + err = 0; + for (i = 1; i < 5; i++) + err += tea6420_s_routing(sd, 6, i, 0); + if (err) { + v4l_dbg(1, debug, client, "could not initialize tea6420\n"); + return -ENODEV; + } + return 0; +} + +static int tea6420_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + return 0; +} + +static const struct i2c_device_id tea6420_id[] = { + { "tea6420", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tea6420_id); + +static struct i2c_driver tea6420_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tea6420", + }, + .probe = tea6420_probe, + .remove = tea6420_remove, + .id_table = tea6420_id, +}; + +module_i2c_driver(tea6420_driver); diff --git a/drivers/media/i2c/tea6420.h b/drivers/media/i2c/tea6420.h new file mode 100644 index 00000000..4aa3edb3 --- /dev/null +++ b/drivers/media/i2c/tea6420.h @@ -0,0 +1,24 @@ +#ifndef __INCLUDED_TEA6420__ +#define __INCLUDED_TEA6420__ + +/* input pins */ +#define TEA6420_OUTPUT1 1 +#define TEA6420_OUTPUT2 2 +#define TEA6420_OUTPUT3 3 +#define TEA6420_OUTPUT4 4 + +/* output pins */ +#define TEA6420_INPUT1 1 +#define TEA6420_INPUT2 2 +#define TEA6420_INPUT3 3 +#define TEA6420_INPUT4 4 +#define TEA6420_INPUT5 5 +#define TEA6420_INPUT6 6 + +/* gain on the output pins, ORed with the output pin */ +#define TEA6420_GAIN0 0x00 +#define TEA6420_GAIN2 0x20 +#define TEA6420_GAIN4 0x40 +#define TEA6420_GAIN6 0x60 + +#endif diff --git a/drivers/media/i2c/ths7303.c b/drivers/media/i2c/ths7303.c new file mode 100644 index 00000000..c4339556 --- /dev/null +++ b/drivers/media/i2c/ths7303.c @@ -0,0 +1,446 @@ +/* + * ths7303/53- THS7303/53 Video Amplifier driver + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. + * + * Author: Chaithrika U S + * + * Contributors: + * Hans Verkuil + * Lad, Prabhakar + * Martin Bugge + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include +#include +#include + +#define THS7303_CHANNEL_1 1 +#define THS7303_CHANNEL_2 2 +#define THS7303_CHANNEL_3 3 + +struct ths7303_state { + struct v4l2_subdev sd; + struct ths7303_platform_data pdata; + struct v4l2_bt_timings bt; + int std_id; + int stream_on; + int driver_data; +}; + +enum ths7303_filter_mode { + THS7303_FILTER_MODE_480I_576I, + THS7303_FILTER_MODE_480P_576P, + THS7303_FILTER_MODE_720P_1080I, + THS7303_FILTER_MODE_1080P, + THS7303_FILTER_MODE_DISABLE +}; + +MODULE_DESCRIPTION("TI THS7303 video amplifier driver"); +MODULE_AUTHOR("Chaithrika U S"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +static inline struct ths7303_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ths7303_state, sd); +} + +static int ths7303_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int ths7303_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret == 0) + return 0; + } + return ret; +} + +/* following function is used to set ths7303 */ +int ths7303_setval(struct v4l2_subdev *sd, enum ths7303_filter_mode mode) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ths7303_state *state = to_state(sd); + struct ths7303_platform_data *pdata = &state->pdata; + u8 val, sel = 0; + int err, disable = 0; + + if (!client) + return -EINVAL; + + switch (mode) { + case THS7303_FILTER_MODE_1080P: + sel = 0x3; /*1080p and SXGA/UXGA */ + break; + case THS7303_FILTER_MODE_720P_1080I: + sel = 0x2; /*720p, 1080i and SVGA/XGA */ + break; + case THS7303_FILTER_MODE_480P_576P: + sel = 0x1; /* EDTV 480p/576p and VGA */ + break; + case THS7303_FILTER_MODE_480I_576I: + sel = 0x0; /* SDTV, S-Video, 480i/576i */ + break; + default: + /* disable all channels */ + disable = 1; + } + + val = (sel << 6) | (sel << 3); + if (!disable) + val |= (pdata->ch_1 & 0x27); + err = ths7303_write(sd, THS7303_CHANNEL_1, val); + if (err) + goto out; + + val = (sel << 6) | (sel << 3); + if (!disable) + val |= (pdata->ch_2 & 0x27); + err = ths7303_write(sd, THS7303_CHANNEL_2, val); + if (err) + goto out; + + val = (sel << 6) | (sel << 3); + if (!disable) + val |= (pdata->ch_3 & 0x27); + err = ths7303_write(sd, THS7303_CHANNEL_3, val); + if (err) + goto out; + + return 0; +out: + pr_info("write byte data failed\n"); + return err; +} + +static int ths7303_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct ths7303_state *state = to_state(sd); + + if (norm & (V4L2_STD_ALL & ~V4L2_STD_SECAM)) { + state->std_id = 1; + state->bt.pixelclock = 0; + return ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I); + } + + return ths7303_setval(sd, THS7303_FILTER_MODE_DISABLE); +} + +static int ths7303_config(struct v4l2_subdev *sd) +{ + struct ths7303_state *state = to_state(sd); + int res; + + if (!state->stream_on) { + ths7303_write(sd, THS7303_CHANNEL_1, + (ths7303_read(sd, THS7303_CHANNEL_1) & 0xf8) | + 0x00); + ths7303_write(sd, THS7303_CHANNEL_2, + (ths7303_read(sd, THS7303_CHANNEL_2) & 0xf8) | + 0x00); + ths7303_write(sd, THS7303_CHANNEL_3, + (ths7303_read(sd, THS7303_CHANNEL_3) & 0xf8) | + 0x00); + return 0; + } + + if (state->bt.pixelclock > 120000000) + res = ths7303_setval(sd, THS7303_FILTER_MODE_1080P); + else if (state->bt.pixelclock > 70000000) + res = ths7303_setval(sd, THS7303_FILTER_MODE_720P_1080I); + else if (state->bt.pixelclock > 20000000) + res = ths7303_setval(sd, THS7303_FILTER_MODE_480P_576P); + else if (state->std_id) + res = ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I); + else + /* disable all channels */ + res = ths7303_setval(sd, THS7303_FILTER_MODE_DISABLE); + + return res; + +} + +static int ths7303_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct ths7303_state *state = to_state(sd); + + state->stream_on = enable; + + return ths7303_config(sd); +} + +/* for setting filter for HD output */ +static int ths7303_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *dv_timings) +{ + struct ths7303_state *state = to_state(sd); + + if (!dv_timings || dv_timings->type != V4L2_DV_BT_656_1120) + return -EINVAL; + + state->bt = dv_timings->bt; + state->std_id = 0; + + return ths7303_config(sd); +} + +static int ths7303_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ths7303_state *state = to_state(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->driver_data, 0); +} + +static const struct v4l2_subdev_video_ops ths7303_video_ops = { + .s_stream = ths7303_s_stream, + .s_std_output = ths7303_s_std_output, + .s_dv_timings = ths7303_s_dv_timings, +}; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + +static int ths7303_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->size = 1; + reg->val = ths7303_read(sd, reg->reg); + return 0; +} + +static int ths7303_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + ths7303_write(sd, reg->reg, reg->val); + return 0; +} +#endif + +static const char * const stc_lpf_sel_txt[4] = { + "500-kHz Filter", + "2.5-MHz Filter", + "5-MHz Filter", + "5-MHz Filter", +}; + +static const char * const in_mux_sel_txt[2] = { + "Input A Select", + "Input B Select", +}; + +static const char * const lpf_freq_sel_txt[4] = { + "9-MHz LPF", + "16-MHz LPF", + "35-MHz LPF", + "Bypass LPF", +}; + +static const char * const in_bias_sel_dis_cont_txt[8] = { + "Disable Channel", + "Mute Function - No Output", + "DC Bias Select", + "DC Bias + 250 mV Offset Select", + "AC Bias Select", + "Sync Tip Clamp with low bias", + "Sync Tip Clamp with mid bias", + "Sync Tip Clamp with high bias", +}; + +static void ths7303_log_channel_status(struct v4l2_subdev *sd, u8 reg) +{ + u8 val = ths7303_read(sd, reg); + + if ((val & 0x7) == 0) { + v4l2_info(sd, "Channel %d Off\n", reg); + return; + } + + v4l2_info(sd, "Channel %d On\n", reg); + v4l2_info(sd, " value 0x%x\n", val); + v4l2_info(sd, " %s\n", stc_lpf_sel_txt[(val >> 6) & 0x3]); + v4l2_info(sd, " %s\n", in_mux_sel_txt[(val >> 5) & 0x1]); + v4l2_info(sd, " %s\n", lpf_freq_sel_txt[(val >> 3) & 0x3]); + v4l2_info(sd, " %s\n", in_bias_sel_dis_cont_txt[(val >> 0) & 0x7]); +} + +static int ths7303_log_status(struct v4l2_subdev *sd) +{ + struct ths7303_state *state = to_state(sd); + + v4l2_info(sd, "stream %s\n", state->stream_on ? "On" : "Off"); + + if (state->bt.pixelclock) { + struct v4l2_bt_timings *bt = bt = &state->bt; + u32 frame_width, frame_height; + + frame_width = bt->width + bt->hfrontporch + + bt->hsync + bt->hbackporch; + frame_height = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + v4l2_info(sd, + "timings: %dx%d%s%d (%dx%d). Pix freq. = %d Hz. Polarities = 0x%x\n", + bt->width, bt->height, bt->interlaced ? "i" : "p", + (frame_height * frame_width) > 0 ? + (int)bt->pixelclock / + (frame_height * frame_width) : 0, + frame_width, frame_height, + (int)bt->pixelclock, bt->polarities); + } else { + v4l2_info(sd, "no timings set\n"); + } + + ths7303_log_channel_status(sd, THS7303_CHANNEL_1); + ths7303_log_channel_status(sd, THS7303_CHANNEL_2); + ths7303_log_channel_status(sd, THS7303_CHANNEL_3); + + return 0; +} + +static const struct v4l2_subdev_core_ops ths7303_core_ops = { + .g_chip_ident = ths7303_g_chip_ident, + .log_status = ths7303_log_status, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ths7303_g_register, + .s_register = ths7303_s_register, +#endif +}; + +static const struct v4l2_subdev_ops ths7303_ops = { + .core = &ths7303_core_ops, + .video = &ths7303_video_ops, +}; + +static int ths7303_setup(struct v4l2_subdev *sd) +{ + struct ths7303_state *state = to_state(sd); + struct ths7303_platform_data *pdata = &state->pdata; + int ret; + u8 mask; + + state->stream_on = pdata->init_enable; + + mask = state->stream_on ? 0xff : 0xf8; + + ret = ths7303_write(sd, THS7303_CHANNEL_1, pdata->ch_1 & mask); + if (ret) + return ret; + + ret = ths7303_write(sd, THS7303_CHANNEL_2, pdata->ch_2 & mask); + if (ret) + return ret; + + ret = ths7303_write(sd, THS7303_CHANNEL_3, pdata->ch_3 & mask); + if (ret) + return ret; + + return 0; +} + +static int ths7303_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ths7303_platform_data *pdata = client->dev.platform_data; + struct ths7303_state *state; + struct v4l2_subdev *sd; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = devm_kzalloc(&client->dev, sizeof(struct ths7303_state), + GFP_KERNEL); + if (!state) + return -ENOMEM; + + if (!pdata) + v4l_warn(client, "No platform data, using default data!\n"); + else + state->pdata = *pdata; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &ths7303_ops); + + /* store the driver data to differntiate the chip */ + state->driver_data = (int)id->driver_data; + + if (ths7303_setup(sd) < 0) { + v4l_err(client, "init failed\n"); + return -EIO; + } + + return 0; +} + +static int ths7303_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + + return 0; +} + +static const struct i2c_device_id ths7303_id[] = { + {"ths7303", V4L2_IDENT_THS7303}, + {"ths7353", V4L2_IDENT_THS7353}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, ths7303_id); + +static struct i2c_driver ths7303_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ths73x3", + }, + .probe = ths7303_probe, + .remove = ths7303_remove, + .id_table = ths7303_id, +}; + +module_i2c_driver(ths7303_driver); diff --git a/drivers/media/i2c/tlv320aic23b.c b/drivers/media/i2c/tlv320aic23b.c new file mode 100644 index 00000000..809a75a5 --- /dev/null +++ b/drivers/media/i2c/tlv320aic23b.c @@ -0,0 +1,230 @@ +/* + * tlv320aic23b - driver version 0.0.1 + * + * Copyright (C) 2006 Scott Alfter + * + * Based on wm8775 driver + * + * Copyright (C) 2004 Ulf Eklund + * Copyright (C) 2005 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("tlv320aic23b driver"); +MODULE_AUTHOR("Scott Alfter, Ulf Eklund, Hans Verkuil"); +MODULE_LICENSE("GPL"); + + +/* ----------------------------------------------------------------------- */ + +struct tlv320aic23b_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; +}; + +static inline struct tlv320aic23b_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tlv320aic23b_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tlv320aic23b_state, hdl)->sd; +} + +static int tlv320aic23b_write(struct v4l2_subdev *sd, int reg, u16 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + + if ((reg < 0 || reg > 9) && (reg != 15)) { + v4l2_err(sd, "Invalid register R%d\n", reg); + return -1; + } + + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) + return 0; + v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg); + return -1; +} + +static int tlv320aic23b_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + switch (freq) { + case 32000: /* set sample rate to 32 kHz */ + tlv320aic23b_write(sd, 8, 0x018); + break; + case 44100: /* set sample rate to 44.1 kHz */ + tlv320aic23b_write(sd, 8, 0x022); + break; + case 48000: /* set sample rate to 48 kHz */ + tlv320aic23b_write(sd, 8, 0x000); + break; + default: + return -EINVAL; + } + return 0; +} + +static int tlv320aic23b_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + tlv320aic23b_write(sd, 0, 0x180); /* mute both channels */ + /* set gain on both channels to +3.0 dB */ + if (!ctrl->val) + tlv320aic23b_write(sd, 0, 0x119); + return 0; + } + return -EINVAL; +} + +static int tlv320aic23b_log_status(struct v4l2_subdev *sd) +{ + struct tlv320aic23b_state *state = to_state(sd); + + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops tlv320aic23b_ctrl_ops = { + .s_ctrl = tlv320aic23b_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tlv320aic23b_core_ops = { + .log_status = tlv320aic23b_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_audio_ops tlv320aic23b_audio_ops = { + .s_clock_freq = tlv320aic23b_s_clock_freq, +}; + +static const struct v4l2_subdev_ops tlv320aic23b_ops = { + .core = &tlv320aic23b_core_ops, + .audio = &tlv320aic23b_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static int tlv320aic23b_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tlv320aic23b_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct tlv320aic23b_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &tlv320aic23b_ops); + + /* Initialize tlv320aic23b */ + + /* RESET */ + tlv320aic23b_write(sd, 15, 0x000); + /* turn off DAC & mic input */ + tlv320aic23b_write(sd, 6, 0x00A); + /* left-justified, 24-bit, master mode */ + tlv320aic23b_write(sd, 7, 0x049); + /* set gain on both channels to +3.0 dB */ + tlv320aic23b_write(sd, 0, 0x119); + /* set sample rate to 48 kHz */ + tlv320aic23b_write(sd, 8, 0x000); + /* activate digital interface */ + tlv320aic23b_write(sd, 9, 0x001); + + v4l2_ctrl_handler_init(&state->hdl, 1); + v4l2_ctrl_new_std(&state->hdl, &tlv320aic23b_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_handler_setup(&state->hdl); + return 0; +} + +static int tlv320aic23b_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tlv320aic23b_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id tlv320aic23b_id[] = { + { "tlv320aic23b", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tlv320aic23b_id); + +static struct i2c_driver tlv320aic23b_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tlv320aic23b", + }, + .probe = tlv320aic23b_probe, + .remove = tlv320aic23b_remove, + .id_table = tlv320aic23b_id, +}; + +module_i2c_driver(tlv320aic23b_driver); diff --git a/drivers/media/i2c/tvaudio.c b/drivers/media/i2c/tvaudio.c new file mode 100644 index 00000000..b72a59d3 --- /dev/null +++ b/drivers/media/i2c/tvaudio.c @@ -0,0 +1,2069 @@ +/* + * Driver for simple i2c audio chips. + * + * Copyright (c) 2000 Gerd Knorr + * based on code by: + * Eric Sandeen (eric_sandeen@bigfoot.com) + * Steve VanDeBogart (vandebo@uclink.berkeley.edu) + * Greg Alexander (galexand@acm.org) + * + * For the TDA9875 part: + * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source + * and Eric Sandeen + * + * Copyright(c) 2005-2008 Mauro Carvalho Chehab + * - Some cleanups, code fixes, etc + * - Convert it to V4L2 API + * + * This code is placed under the terms of the GNU General Public License + * + * OPTIONS: + * debug - set to 1 if you'd like to see debug messages + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +/* ---------------------------------------------------------------------- */ +/* insmod args */ + +static int debug; /* insmod parameter */ +module_param(debug, int, 0644); + +MODULE_DESCRIPTION("device driver for various i2c TV sound decoder / audiomux chips"); +MODULE_AUTHOR("Eric Sandeen, Steve VanDeBogart, Greg Alexander, Gerd Knorr"); +MODULE_LICENSE("GPL"); + +#define UNSET (-1U) + +/* ---------------------------------------------------------------------- */ +/* our structs */ + +#define MAXREGS 256 + +struct CHIPSTATE; +typedef int (*getvalue)(int); +typedef int (*checkit)(struct CHIPSTATE*); +typedef int (*initialize)(struct CHIPSTATE*); +typedef int (*getrxsubchans)(struct CHIPSTATE *); +typedef void (*setaudmode)(struct CHIPSTATE*, int mode); + +/* i2c command */ +typedef struct AUDIOCMD { + int count; /* # of bytes to send */ + unsigned char bytes[MAXREGS+1]; /* addr, data, data, ... */ +} audiocmd; + +/* chip description */ +struct CHIPDESC { + char *name; /* chip name */ + int addr_lo, addr_hi; /* i2c address range */ + int registers; /* # of registers */ + + int *insmodopt; + checkit checkit; + initialize initialize; + int flags; +#define CHIP_HAS_VOLUME 1 +#define CHIP_HAS_BASSTREBLE 2 +#define CHIP_HAS_INPUTSEL 4 +#define CHIP_NEED_CHECKMODE 8 + + /* various i2c command sequences */ + audiocmd init; + + /* which register has which value */ + int leftreg, rightreg, treblereg, bassreg; + + /* initialize with (defaults to 65535/32768/32768 */ + int volinit, trebleinit, bassinit; + + /* functions to convert the values (v4l -> chip) */ + getvalue volfunc, treblefunc, bassfunc; + + /* get/set mode */ + getrxsubchans getrxsubchans; + setaudmode setaudmode; + + /* input switch register + values for v4l inputs */ + int inputreg; + int inputmap[4]; + int inputmute; + int inputmask; +}; + +/* current state of the chip */ +struct CHIPSTATE { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct { + /* volume/balance cluster */ + struct v4l2_ctrl *volume; + struct v4l2_ctrl *balance; + }; + + /* chip-specific description - should point to + an entry at CHIPDESC table */ + struct CHIPDESC *desc; + + /* shadow register set */ + audiocmd shadow; + + /* current settings */ + u16 muted; + int prevmode; + int radio; + int input; + + /* thread */ + struct task_struct *thread; + struct timer_list wt; + int audmode; +}; + +static inline struct CHIPSTATE *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct CHIPSTATE, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct CHIPSTATE, hdl)->sd; +} + + +/* ---------------------------------------------------------------------- */ +/* i2c I/O functions */ + +static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) +{ + struct v4l2_subdev *sd = &chip->sd; + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[2]; + + if (subaddr < 0) { + v4l2_dbg(1, debug, sd, "chip_write: 0x%x\n", val); + chip->shadow.bytes[1] = val; + buffer[0] = val; + if (1 != i2c_master_send(c, buffer, 1)) { + v4l2_warn(sd, "I/O error (write 0x%x)\n", val); + return -1; + } + } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l2_info(sd, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + + v4l2_dbg(1, debug, sd, "chip_write: reg%d=0x%x\n", + subaddr, val); + chip->shadow.bytes[subaddr+1] = val; + buffer[0] = subaddr; + buffer[1] = val; + if (2 != i2c_master_send(c, buffer, 2)) { + v4l2_warn(sd, "I/O error (write reg%d=0x%x)\n", + subaddr, val); + return -1; + } + } + return 0; +} + +static int chip_write_masked(struct CHIPSTATE *chip, + int subaddr, int val, int mask) +{ + struct v4l2_subdev *sd = &chip->sd; + + if (mask != 0) { + if (subaddr < 0) { + val = (chip->shadow.bytes[1] & ~mask) | (val & mask); + } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l2_info(sd, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + + val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask); + } + } + return chip_write(chip, subaddr, val); +} + +static int chip_read(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer; + + if (1 != i2c_master_recv(c, &buffer, 1)) { + v4l2_warn(sd, "I/O error (read)\n"); + return -1; + } + v4l2_dbg(1, debug, sd, "chip_read: 0x%x\n", buffer); + return buffer; +} + +static int chip_read2(struct CHIPSTATE *chip, int subaddr) +{ + struct v4l2_subdev *sd = &chip->sd; + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char write[1]; + unsigned char read[1]; + struct i2c_msg msgs[2] = { + { + .addr = c->addr, + .len = 1, + .buf = write + }, + { + .addr = c->addr, + .flags = I2C_M_RD, + .len = 1, + .buf = read + } + }; + + write[0] = subaddr; + + if (2 != i2c_transfer(c->adapter, msgs, 2)) { + v4l2_warn(sd, "I/O error (read2)\n"); + return -1; + } + v4l2_dbg(1, debug, sd, "chip_read2: reg%d=0x%x\n", + subaddr, read[0]); + return read[0]; +} + +static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) +{ + struct v4l2_subdev *sd = &chip->sd; + struct i2c_client *c = v4l2_get_subdevdata(sd); + int i; + + if (0 == cmd->count) + return 0; + + if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l2_info(sd, + "Tried to access a non-existent register range: %d to %d\n", + cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1); + return -EINVAL; + } + + /* FIXME: it seems that the shadow bytes are wrong bellow !*/ + + /* update our shadow register set; print bytes if (debug > 0) */ + v4l2_dbg(1, debug, sd, "chip_cmd(%s): reg=%d, data:", + name, cmd->bytes[0]); + for (i = 1; i < cmd->count; i++) { + if (debug) + printk(KERN_CONT " 0x%x", cmd->bytes[i]); + chip->shadow.bytes[i+cmd->bytes[0]] = cmd->bytes[i]; + } + if (debug) + printk(KERN_CONT "\n"); + + /* send data to the chip */ + if (cmd->count != i2c_master_send(c, cmd->bytes, cmd->count)) { + v4l2_warn(sd, "I/O error (%s)\n", name); + return -1; + } + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* kernel thread for doing i2c stuff asyncronly + * right now it is used only to check the audio mode (mono/stereo/whatever) + * some time after switching to another TV channel, then turn on stereo + * if available, ... + */ + +static void chip_thread_wake(unsigned long data) +{ + struct CHIPSTATE *chip = (struct CHIPSTATE*)data; + wake_up_process(chip->thread); +} + +static int chip_thread(void *data) +{ + struct CHIPSTATE *chip = data; + struct CHIPDESC *desc = chip->desc; + struct v4l2_subdev *sd = &chip->sd; + int mode, selected; + + v4l2_dbg(1, debug, sd, "thread started\n"); + set_freezable(); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + if (!kthread_should_stop()) + schedule(); + set_current_state(TASK_RUNNING); + try_to_freeze(); + if (kthread_should_stop()) + break; + v4l2_dbg(1, debug, sd, "thread wakeup\n"); + + /* don't do anything for radio */ + if (chip->radio) + continue; + + /* have a look what's going on */ + mode = desc->getrxsubchans(chip); + if (mode == chip->prevmode) + continue; + + /* chip detected a new audio mode - set it */ + v4l2_dbg(1, debug, sd, "thread checkmode\n"); + + chip->prevmode = mode; + + selected = V4L2_TUNER_MODE_MONO; + switch (chip->audmode) { + case V4L2_TUNER_MODE_MONO: + if (mode & V4L2_TUNER_SUB_LANG1) + selected = V4L2_TUNER_MODE_LANG1; + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + if (mode & V4L2_TUNER_SUB_LANG1) + selected = V4L2_TUNER_MODE_LANG1; + else if (mode & V4L2_TUNER_SUB_STEREO) + selected = V4L2_TUNER_MODE_STEREO; + break; + case V4L2_TUNER_MODE_LANG2: + if (mode & V4L2_TUNER_SUB_LANG2) + selected = V4L2_TUNER_MODE_LANG2; + else if (mode & V4L2_TUNER_SUB_STEREO) + selected = V4L2_TUNER_MODE_STEREO; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + if (mode & V4L2_TUNER_SUB_LANG2) + selected = V4L2_TUNER_MODE_LANG1_LANG2; + else if (mode & V4L2_TUNER_SUB_STEREO) + selected = V4L2_TUNER_MODE_STEREO; + } + desc->setaudmode(chip, selected); + + /* schedule next check */ + mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); + } + + v4l2_dbg(1, debug, sd, "thread exiting\n"); + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tda9840 */ + +#define TDA9840_SW 0x00 +#define TDA9840_LVADJ 0x02 +#define TDA9840_STADJ 0x03 +#define TDA9840_TEST 0x04 + +#define TDA9840_MONO 0x10 +#define TDA9840_STEREO 0x2a +#define TDA9840_DUALA 0x12 +#define TDA9840_DUALB 0x1e +#define TDA9840_DUALAB 0x1a +#define TDA9840_DUALBA 0x16 +#define TDA9840_EXTERNAL 0x7a + +#define TDA9840_DS_DUAL 0x20 /* Dual sound identified */ +#define TDA9840_ST_STEREO 0x40 /* Stereo sound identified */ +#define TDA9840_PONRES 0x80 /* Power-on reset detected if = 1 */ + +#define TDA9840_TEST_INT1SN 0x1 /* Integration time 0.5s when set */ +#define TDA9840_TEST_INTFU 0x02 /* Disables integrator function */ + +static int tda9840_getrxsubchans(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int val, mode; + + val = chip_read(chip); + mode = V4L2_TUNER_SUB_MONO; + if (val & TDA9840_DS_DUAL) + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + if (val & TDA9840_ST_STEREO) + mode = V4L2_TUNER_SUB_STEREO; + + v4l2_dbg(1, debug, sd, + "tda9840_getrxsubchans(): raw chip read: %d, return: %d\n", + val, mode); + return mode; +} + +static void tda9840_setaudmode(struct CHIPSTATE *chip, int mode) +{ + int update = 1; + int t = chip->shadow.bytes[TDA9840_SW + 1] & ~0x7e; + + switch (mode) { + case V4L2_TUNER_MODE_MONO: + t |= TDA9840_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + t |= TDA9840_STEREO; + break; + case V4L2_TUNER_MODE_LANG1: + t |= TDA9840_DUALA; + break; + case V4L2_TUNER_MODE_LANG2: + t |= TDA9840_DUALB; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + t |= TDA9840_DUALAB; + break; + default: + update = 0; + } + + if (update) + chip_write(chip, TDA9840_SW, t); +} + +static int tda9840_checkit(struct CHIPSTATE *chip) +{ + int rc; + rc = chip_read(chip); + /* lower 5 bits should be 0 */ + return ((rc & 0x1f) == 0) ? 1 : 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tda985x */ + +/* subaddresses for TDA9855 */ +#define TDA9855_VR 0x00 /* Volume, right */ +#define TDA9855_VL 0x01 /* Volume, left */ +#define TDA9855_BA 0x02 /* Bass */ +#define TDA9855_TR 0x03 /* Treble */ +#define TDA9855_SW 0x04 /* Subwoofer - not connected on DTV2000 */ + +/* subaddresses for TDA9850 */ +#define TDA9850_C4 0x04 /* Control 1 for TDA9850 */ + +/* subaddesses for both chips */ +#define TDA985x_C5 0x05 /* Control 2 for TDA9850, Control 1 for TDA9855 */ +#define TDA985x_C6 0x06 /* Control 3 for TDA9850, Control 2 for TDA9855 */ +#define TDA985x_C7 0x07 /* Control 4 for TDA9850, Control 3 for TDA9855 */ +#define TDA985x_A1 0x08 /* Alignment 1 for both chips */ +#define TDA985x_A2 0x09 /* Alignment 2 for both chips */ +#define TDA985x_A3 0x0a /* Alignment 3 for both chips */ + +/* Masks for bits in TDA9855 subaddresses */ +/* 0x00 - VR in TDA9855 */ +/* 0x01 - VL in TDA9855 */ +/* lower 7 bits control gain from -71dB (0x28) to 16dB (0x7f) + * in 1dB steps - mute is 0x27 */ + + +/* 0x02 - BA in TDA9855 */ +/* lower 5 bits control bass gain from -12dB (0x06) to 16.5dB (0x19) + * in .5dB steps - 0 is 0x0E */ + + +/* 0x03 - TR in TDA9855 */ +/* 4 bits << 1 control treble gain from -12dB (0x3) to 12dB (0xb) + * in 3dB steps - 0 is 0x7 */ + +/* Masks for bits in both chips' subaddresses */ +/* 0x04 - SW in TDA9855, C4/Control 1 in TDA9850 */ +/* Unique to TDA9855: */ +/* 4 bits << 2 control subwoofer/surround gain from -14db (0x1) to 14db (0xf) + * in 3dB steps - mute is 0x0 */ + +/* Unique to TDA9850: */ +/* lower 4 bits control stereo noise threshold, over which stereo turns off + * set to values of 0x00 through 0x0f for Ster1 through Ster16 */ + + +/* 0x05 - C5 - Control 1 in TDA9855 , Control 2 in TDA9850*/ +/* Unique to TDA9855: */ +#define TDA9855_MUTE 1<<7 /* GMU, Mute at outputs */ +#define TDA9855_AVL 1<<6 /* AVL, Automatic Volume Level */ +#define TDA9855_LOUD 1<<5 /* Loudness, 1==off */ +#define TDA9855_SUR 1<<3 /* Surround / Subwoofer 1==.5(L-R) 0==.5(L+R) */ + /* Bits 0 to 3 select various combinations + * of line in and line out, only the + * interesting ones are defined */ +#define TDA9855_EXT 1<<2 /* Selects inputs LIR and LIL. Pins 41 & 12 */ +#define TDA9855_INT 0 /* Selects inputs LOR and LOL. (internal) */ + +/* Unique to TDA9850: */ +/* lower 4 bits contol SAP noise threshold, over which SAP turns off + * set to values of 0x00 through 0x0f for SAP1 through SAP16 */ + + +/* 0x06 - C6 - Control 2 in TDA9855, Control 3 in TDA9850 */ +/* Common to TDA9855 and TDA9850: */ +#define TDA985x_SAP 3<<6 /* Selects SAP output, mute if not received */ +#define TDA985x_MONOSAP 2<<6 /* Selects Mono on left, SAP on right */ +#define TDA985x_STEREO 1<<6 /* Selects Stereo ouput, mono if not received */ +#define TDA985x_MONO 0 /* Forces Mono output */ +#define TDA985x_LMU 1<<3 /* Mute (LOR/LOL for 9855, OUTL/OUTR for 9850) */ + +/* Unique to TDA9855: */ +#define TDA9855_TZCM 1<<5 /* If set, don't mute till zero crossing */ +#define TDA9855_VZCM 1<<4 /* If set, don't change volume till zero crossing*/ +#define TDA9855_LINEAR 0 /* Linear Stereo */ +#define TDA9855_PSEUDO 1 /* Pseudo Stereo */ +#define TDA9855_SPAT_30 2 /* Spatial Stereo, 30% anti-phase crosstalk */ +#define TDA9855_SPAT_50 3 /* Spatial Stereo, 52% anti-phase crosstalk */ +#define TDA9855_E_MONO 7 /* Forced mono - mono select elseware, so useless*/ + +/* 0x07 - C7 - Control 3 in TDA9855, Control 4 in TDA9850 */ +/* Common to both TDA9855 and TDA9850: */ +/* lower 4 bits control input gain from -3.5dB (0x0) to 4dB (0xF) + * in .5dB steps - 0dB is 0x7 */ + +/* 0x08, 0x09 - A1 and A2 (read/write) */ +/* Common to both TDA9855 and TDA9850: */ +/* lower 5 bites are wideband and spectral expander alignment + * from 0x00 to 0x1f - nominal at 0x0f and 0x10 (read/write) */ +#define TDA985x_STP 1<<5 /* Stereo Pilot/detect (read-only) */ +#define TDA985x_SAPP 1<<6 /* SAP Pilot/detect (read-only) */ +#define TDA985x_STS 1<<7 /* Stereo trigger 1= <35mV 0= <30mV (write-only)*/ + +/* 0x0a - A3 */ +/* Common to both TDA9855 and TDA9850: */ +/* lower 3 bits control timing current for alignment: -30% (0x0), -20% (0x1), + * -10% (0x2), nominal (0x3), +10% (0x6), +20% (0x5), +30% (0x4) */ +#define TDA985x_ADJ 1<<7 /* Stereo adjust on/off (wideband and spectral */ + +static int tda9855_volume(int val) { return val/0x2e8+0x27; } +static int tda9855_bass(int val) { return val/0xccc+0x06; } +static int tda9855_treble(int val) { return (val/0x1c71+0x3)<<1; } + +static int tda985x_getrxsubchans(struct CHIPSTATE *chip) +{ + int mode, val; + + /* Add mono mode regardless of SAP and stereo */ + /* Allows forced mono */ + mode = V4L2_TUNER_SUB_MONO; + val = chip_read(chip); + if (val & TDA985x_STP) + mode = V4L2_TUNER_SUB_STEREO; + if (val & TDA985x_SAPP) + mode |= V4L2_TUNER_SUB_SAP; + return mode; +} + +static void tda985x_setaudmode(struct CHIPSTATE *chip, int mode) +{ + int update = 1; + int c6 = chip->shadow.bytes[TDA985x_C6+1] & 0x3f; + + switch (mode) { + case V4L2_TUNER_MODE_MONO: + c6 |= TDA985x_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + c6 |= TDA985x_STEREO; + break; + case V4L2_TUNER_MODE_SAP: + c6 |= TDA985x_SAP; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + c6 |= TDA985x_MONOSAP; + break; + default: + update = 0; + } + if (update) + chip_write(chip,TDA985x_C6,c6); +} + + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tda9873h */ + +/* Subaddresses for TDA9873H */ + +#define TDA9873_SW 0x00 /* Switching */ +#define TDA9873_AD 0x01 /* Adjust */ +#define TDA9873_PT 0x02 /* Port */ + +/* Subaddress 0x00: Switching Data + * B7..B0: + * + * B1, B0: Input source selection + * 0, 0 internal + * 1, 0 external stereo + * 0, 1 external mono + */ +#define TDA9873_INP_MASK 3 +#define TDA9873_INTERNAL 0 +#define TDA9873_EXT_STEREO 2 +#define TDA9873_EXT_MONO 1 + +/* B3, B2: output signal select + * B4 : transmission mode + * 0, 0, 1 Mono + * 1, 0, 0 Stereo + * 1, 1, 1 Stereo (reversed channel) + * 0, 0, 0 Dual AB + * 0, 0, 1 Dual AA + * 0, 1, 0 Dual BB + * 0, 1, 1 Dual BA + */ + +#define TDA9873_TR_MASK (7 << 2) +#define TDA9873_TR_MONO 4 +#define TDA9873_TR_STEREO 1 << 4 +#define TDA9873_TR_REVERSE ((1 << 3) | (1 << 2)) +#define TDA9873_TR_DUALA 1 << 2 +#define TDA9873_TR_DUALB 1 << 3 +#define TDA9873_TR_DUALAB 0 + +/* output level controls + * B5: output level switch (0 = reduced gain, 1 = normal gain) + * B6: mute (1 = muted) + * B7: auto-mute (1 = auto-mute enabled) + */ + +#define TDA9873_GAIN_NORMAL 1 << 5 +#define TDA9873_MUTE 1 << 6 +#define TDA9873_AUTOMUTE 1 << 7 + +/* Subaddress 0x01: Adjust/standard */ + +/* Lower 4 bits (C3..C0) control stereo adjustment on R channel (-0.6 - +0.7 dB) + * Recommended value is +0 dB + */ + +#define TDA9873_STEREO_ADJ 0x06 /* 0dB gain */ + +/* Bits C6..C4 control FM stantard + * C6, C5, C4 + * 0, 0, 0 B/G (PAL FM) + * 0, 0, 1 M + * 0, 1, 0 D/K(1) + * 0, 1, 1 D/K(2) + * 1, 0, 0 D/K(3) + * 1, 0, 1 I + */ +#define TDA9873_BG 0 +#define TDA9873_M 1 +#define TDA9873_DK1 2 +#define TDA9873_DK2 3 +#define TDA9873_DK3 4 +#define TDA9873_I 5 + +/* C7 controls identification response time (1=fast/0=normal) + */ +#define TDA9873_IDR_NORM 0 +#define TDA9873_IDR_FAST 1 << 7 + + +/* Subaddress 0x02: Port data */ + +/* E1, E0 free programmable ports P1/P2 + 0, 0 both ports low + 0, 1 P1 high + 1, 0 P2 high + 1, 1 both ports high +*/ + +#define TDA9873_PORTS 3 + +/* E2: test port */ +#define TDA9873_TST_PORT 1 << 2 + +/* E5..E3 control mono output channel (together with transmission mode bit B4) + * + * E5 E4 E3 B4 OUTM + * 0 0 0 0 mono + * 0 0 1 0 DUAL B + * 0 1 0 1 mono (from stereo decoder) + */ +#define TDA9873_MOUT_MONO 0 +#define TDA9873_MOUT_FMONO 0 +#define TDA9873_MOUT_DUALA 0 +#define TDA9873_MOUT_DUALB 1 << 3 +#define TDA9873_MOUT_ST 1 << 4 +#define TDA9873_MOUT_EXTM ((1 << 4) | (1 << 3)) +#define TDA9873_MOUT_EXTL 1 << 5 +#define TDA9873_MOUT_EXTR ((1 << 5) | (1 << 3)) +#define TDA9873_MOUT_EXTLR ((1 << 5) | (1 << 4)) +#define TDA9873_MOUT_MUTE ((1 << 5) | (1 << 4) | (1 << 3)) + +/* Status bits: (chip read) */ +#define TDA9873_PONR 0 /* Power-on reset detected if = 1 */ +#define TDA9873_STEREO 2 /* Stereo sound is identified */ +#define TDA9873_DUAL 4 /* Dual sound is identified */ + +static int tda9873_getrxsubchans(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int val,mode; + + val = chip_read(chip); + mode = V4L2_TUNER_SUB_MONO; + if (val & TDA9873_STEREO) + mode = V4L2_TUNER_SUB_STEREO; + if (val & TDA9873_DUAL) + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + v4l2_dbg(1, debug, sd, + "tda9873_getrxsubchans(): raw chip read: %d, return: %d\n", + val, mode); + return mode; +} + +static void tda9873_setaudmode(struct CHIPSTATE *chip, int mode) +{ + struct v4l2_subdev *sd = &chip->sd; + int sw_data = chip->shadow.bytes[TDA9873_SW+1] & ~ TDA9873_TR_MASK; + /* int adj_data = chip->shadow.bytes[TDA9873_AD+1] ; */ + + if ((sw_data & TDA9873_INP_MASK) != TDA9873_INTERNAL) { + v4l2_dbg(1, debug, sd, + "tda9873_setaudmode(): external input\n"); + return; + } + + v4l2_dbg(1, debug, sd, + "tda9873_setaudmode(): chip->shadow.bytes[%d] = %d\n", + TDA9873_SW+1, chip->shadow.bytes[TDA9873_SW+1]); + v4l2_dbg(1, debug, sd, "tda9873_setaudmode(): sw_data = %d\n", + sw_data); + + switch (mode) { + case V4L2_TUNER_MODE_MONO: + sw_data |= TDA9873_TR_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + sw_data |= TDA9873_TR_STEREO; + break; + case V4L2_TUNER_MODE_LANG1: + sw_data |= TDA9873_TR_DUALA; + break; + case V4L2_TUNER_MODE_LANG2: + sw_data |= TDA9873_TR_DUALB; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + sw_data |= TDA9873_TR_DUALAB; + break; + default: + return; + } + + chip_write(chip, TDA9873_SW, sw_data); + v4l2_dbg(1, debug, sd, + "tda9873_setaudmode(): req. mode %d; chip_write: %d\n", + mode, sw_data); +} + +static int tda9873_checkit(struct CHIPSTATE *chip) +{ + int rc; + + if (-1 == (rc = chip_read2(chip,254))) + return 0; + return (rc & ~0x1f) == 0x80; +} + + +/* ---------------------------------------------------------------------- */ +/* audio chip description - defines+functions for tda9874h and tda9874a */ +/* Dariusz Kowalewski */ + +/* Subaddresses for TDA9874H and TDA9874A (slave rx) */ +#define TDA9874A_AGCGR 0x00 /* AGC gain */ +#define TDA9874A_GCONR 0x01 /* general config */ +#define TDA9874A_MSR 0x02 /* monitor select */ +#define TDA9874A_C1FRA 0x03 /* carrier 1 freq. */ +#define TDA9874A_C1FRB 0x04 /* carrier 1 freq. */ +#define TDA9874A_C1FRC 0x05 /* carrier 1 freq. */ +#define TDA9874A_C2FRA 0x06 /* carrier 2 freq. */ +#define TDA9874A_C2FRB 0x07 /* carrier 2 freq. */ +#define TDA9874A_C2FRC 0x08 /* carrier 2 freq. */ +#define TDA9874A_DCR 0x09 /* demodulator config */ +#define TDA9874A_FMER 0x0a /* FM de-emphasis */ +#define TDA9874A_FMMR 0x0b /* FM dematrix */ +#define TDA9874A_C1OLAR 0x0c /* ch.1 output level adj. */ +#define TDA9874A_C2OLAR 0x0d /* ch.2 output level adj. */ +#define TDA9874A_NCONR 0x0e /* NICAM config */ +#define TDA9874A_NOLAR 0x0f /* NICAM output level adj. */ +#define TDA9874A_NLELR 0x10 /* NICAM lower error limit */ +#define TDA9874A_NUELR 0x11 /* NICAM upper error limit */ +#define TDA9874A_AMCONR 0x12 /* audio mute control */ +#define TDA9874A_SDACOSR 0x13 /* stereo DAC output select */ +#define TDA9874A_AOSR 0x14 /* analog output select */ +#define TDA9874A_DAICONR 0x15 /* digital audio interface config */ +#define TDA9874A_I2SOSR 0x16 /* I2S-bus output select */ +#define TDA9874A_I2SOLAR 0x17 /* I2S-bus output level adj. */ +#define TDA9874A_MDACOSR 0x18 /* mono DAC output select (tda9874a) */ +#define TDA9874A_ESP 0xFF /* easy standard progr. (tda9874a) */ + +/* Subaddresses for TDA9874H and TDA9874A (slave tx) */ +#define TDA9874A_DSR 0x00 /* device status */ +#define TDA9874A_NSR 0x01 /* NICAM status */ +#define TDA9874A_NECR 0x02 /* NICAM error count */ +#define TDA9874A_DR1 0x03 /* add. data LSB */ +#define TDA9874A_DR2 0x04 /* add. data MSB */ +#define TDA9874A_LLRA 0x05 /* monitor level read-out LSB */ +#define TDA9874A_LLRB 0x06 /* monitor level read-out MSB */ +#define TDA9874A_SIFLR 0x07 /* SIF level */ +#define TDA9874A_TR2 252 /* test reg. 2 */ +#define TDA9874A_TR1 253 /* test reg. 1 */ +#define TDA9874A_DIC 254 /* device id. code */ +#define TDA9874A_SIC 255 /* software id. code */ + + +static int tda9874a_mode = 1; /* 0: A2, 1: NICAM */ +static int tda9874a_GCONR = 0xc0; /* default config. input pin: SIFSEL=0 */ +static int tda9874a_NCONR = 0x01; /* default NICAM config.: AMSEL=0,AMUTE=1 */ +static int tda9874a_ESP = 0x07; /* default standard: NICAM D/K */ +static int tda9874a_dic = -1; /* device id. code */ + +/* insmod options for tda9874a */ +static unsigned int tda9874a_SIF = UNSET; +static unsigned int tda9874a_AMSEL = UNSET; +static unsigned int tda9874a_STD = UNSET; +module_param(tda9874a_SIF, int, 0444); +module_param(tda9874a_AMSEL, int, 0444); +module_param(tda9874a_STD, int, 0444); + +/* + * initialization table for tda9874 decoder: + * - carrier 1 freq. registers (3 bytes) + * - carrier 2 freq. registers (3 bytes) + * - demudulator config register + * - FM de-emphasis register (slow identification mode) + * Note: frequency registers must be written in single i2c transfer. + */ +static struct tda9874a_MODES { + char *name; + audiocmd cmd; +} tda9874a_modelist[9] = { + { "A2, B/G", /* default */ + { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} }, + { "A2, M (Korea)", + { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} }, + { "A2, D/K (1)", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x82,0x60,0x00, 0x00,0x00 }} }, + { "A2, D/K (2)", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x8C,0x75,0x55, 0x00,0x00 }} }, + { "A2, D/K (3)", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x77,0xA0,0x00, 0x00,0x00 }} }, + { "NICAM, I", + { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} }, + { "NICAM, B/G", + { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} }, + { "NICAM, D/K", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} }, + { "NICAM, L", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} } +}; + +static int tda9874a_setup(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + + chip_write(chip, TDA9874A_AGCGR, 0x00); /* 0 dB */ + chip_write(chip, TDA9874A_GCONR, tda9874a_GCONR); + chip_write(chip, TDA9874A_MSR, (tda9874a_mode) ? 0x03:0x02); + if(tda9874a_dic == 0x11) { + chip_write(chip, TDA9874A_FMMR, 0x80); + } else { /* dic == 0x07 */ + chip_cmd(chip,"tda9874_modelist",&tda9874a_modelist[tda9874a_STD].cmd); + chip_write(chip, TDA9874A_FMMR, 0x00); + } + chip_write(chip, TDA9874A_C1OLAR, 0x00); /* 0 dB */ + chip_write(chip, TDA9874A_C2OLAR, 0x00); /* 0 dB */ + chip_write(chip, TDA9874A_NCONR, tda9874a_NCONR); + chip_write(chip, TDA9874A_NOLAR, 0x00); /* 0 dB */ + /* Note: If signal quality is poor you may want to change NICAM */ + /* error limit registers (NLELR and NUELR) to some greater values. */ + /* Then the sound would remain stereo, but won't be so clear. */ + chip_write(chip, TDA9874A_NLELR, 0x14); /* default */ + chip_write(chip, TDA9874A_NUELR, 0x50); /* default */ + + if(tda9874a_dic == 0x11) { + chip_write(chip, TDA9874A_AMCONR, 0xf9); + chip_write(chip, TDA9874A_SDACOSR, (tda9874a_mode) ? 0x81:0x80); + chip_write(chip, TDA9874A_AOSR, 0x80); + chip_write(chip, TDA9874A_MDACOSR, (tda9874a_mode) ? 0x82:0x80); + chip_write(chip, TDA9874A_ESP, tda9874a_ESP); + } else { /* dic == 0x07 */ + chip_write(chip, TDA9874A_AMCONR, 0xfb); + chip_write(chip, TDA9874A_SDACOSR, (tda9874a_mode) ? 0x81:0x80); + chip_write(chip, TDA9874A_AOSR, 0x00); /* or 0x10 */ + } + v4l2_dbg(1, debug, sd, "tda9874a_setup(): %s [0x%02X].\n", + tda9874a_modelist[tda9874a_STD].name,tda9874a_STD); + return 1; +} + +static int tda9874a_getrxsubchans(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int dsr,nsr,mode; + int necr; /* just for debugging */ + + mode = V4L2_TUNER_SUB_MONO; + + if(-1 == (dsr = chip_read2(chip,TDA9874A_DSR))) + return mode; + if(-1 == (nsr = chip_read2(chip,TDA9874A_NSR))) + return mode; + if(-1 == (necr = chip_read2(chip,TDA9874A_NECR))) + return mode; + + /* need to store dsr/nsr somewhere */ + chip->shadow.bytes[MAXREGS-2] = dsr; + chip->shadow.bytes[MAXREGS-1] = nsr; + + if(tda9874a_mode) { + /* Note: DSR.RSSF and DSR.AMSTAT bits are also checked. + * If NICAM auto-muting is enabled, DSR.AMSTAT=1 indicates + * that sound has (temporarily) switched from NICAM to + * mono FM (or AM) on 1st sound carrier due to high NICAM bit + * error count. So in fact there is no stereo in this case :-( + * But changing the mode to V4L2_TUNER_MODE_MONO would switch + * external 4052 multiplexer in audio_hook(). + */ + if(nsr & 0x02) /* NSR.S/MB=1 */ + mode = V4L2_TUNER_SUB_STEREO; + if(nsr & 0x01) /* NSR.D/SB=1 */ + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + } else { + if(dsr & 0x02) /* DSR.IDSTE=1 */ + mode = V4L2_TUNER_SUB_STEREO; + if(dsr & 0x04) /* DSR.IDDUA=1 */ + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + } + + v4l2_dbg(1, debug, sd, + "tda9874a_getrxsubchans(): DSR=0x%X, NSR=0x%X, NECR=0x%X, return: %d.\n", + dsr, nsr, necr, mode); + return mode; +} + +static void tda9874a_setaudmode(struct CHIPSTATE *chip, int mode) +{ + struct v4l2_subdev *sd = &chip->sd; + + /* Disable/enable NICAM auto-muting (based on DSR.RSSF status bit). */ + /* If auto-muting is disabled, we can hear a signal of degrading quality. */ + if (tda9874a_mode) { + if(chip->shadow.bytes[MAXREGS-2] & 0x20) /* DSR.RSSF=1 */ + tda9874a_NCONR &= 0xfe; /* enable */ + else + tda9874a_NCONR |= 0x01; /* disable */ + chip_write(chip, TDA9874A_NCONR, tda9874a_NCONR); + } + + /* Note: TDA9874A supports automatic FM dematrixing (FMMR register) + * and has auto-select function for audio output (AOSR register). + * Old TDA9874H doesn't support these features. + * TDA9874A also has additional mono output pin (OUTM), which + * on same (all?) tv-cards is not used, anyway (as well as MONOIN). + */ + if(tda9874a_dic == 0x11) { + int aosr = 0x80; + int mdacosr = (tda9874a_mode) ? 0x82:0x80; + + switch(mode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_STEREO: + break; + case V4L2_TUNER_MODE_LANG1: + aosr = 0x80; /* auto-select, dual A/A */ + mdacosr = (tda9874a_mode) ? 0x82:0x80; + break; + case V4L2_TUNER_MODE_LANG2: + aosr = 0xa0; /* auto-select, dual B/B */ + mdacosr = (tda9874a_mode) ? 0x83:0x81; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + aosr = 0x00; /* always route L to L and R to R */ + mdacosr = (tda9874a_mode) ? 0x82:0x80; + break; + default: + return; + } + chip_write(chip, TDA9874A_AOSR, aosr); + chip_write(chip, TDA9874A_MDACOSR, mdacosr); + + v4l2_dbg(1, debug, sd, + "tda9874a_setaudmode(): req. mode %d; AOSR=0x%X, MDACOSR=0x%X.\n", + mode, aosr, mdacosr); + + } else { /* dic == 0x07 */ + int fmmr,aosr; + + switch(mode) { + case V4L2_TUNER_MODE_MONO: + fmmr = 0x00; /* mono */ + aosr = 0x10; /* A/A */ + break; + case V4L2_TUNER_MODE_STEREO: + if(tda9874a_mode) { + fmmr = 0x00; + aosr = 0x00; /* handled by NICAM auto-mute */ + } else { + fmmr = (tda9874a_ESP == 1) ? 0x05 : 0x04; /* stereo */ + aosr = 0x00; + } + break; + case V4L2_TUNER_MODE_LANG1: + fmmr = 0x02; /* dual */ + aosr = 0x10; /* dual A/A */ + break; + case V4L2_TUNER_MODE_LANG2: + fmmr = 0x02; /* dual */ + aosr = 0x20; /* dual B/B */ + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + fmmr = 0x02; /* dual */ + aosr = 0x00; /* dual A/B */ + break; + default: + return; + } + chip_write(chip, TDA9874A_FMMR, fmmr); + chip_write(chip, TDA9874A_AOSR, aosr); + + v4l2_dbg(1, debug, sd, + "tda9874a_setaudmode(): req. mode %d; FMMR=0x%X, AOSR=0x%X.\n", + mode, fmmr, aosr); + } +} + +static int tda9874a_checkit(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int dic,sic; /* device id. and software id. codes */ + + if(-1 == (dic = chip_read2(chip,TDA9874A_DIC))) + return 0; + if(-1 == (sic = chip_read2(chip,TDA9874A_SIC))) + return 0; + + v4l2_dbg(1, debug, sd, "tda9874a_checkit(): DIC=0x%X, SIC=0x%X.\n", dic, sic); + + if((dic == 0x11)||(dic == 0x07)) { + v4l2_info(sd, "found tda9874%s.\n", (dic == 0x11) ? "a" : "h"); + tda9874a_dic = dic; /* remember device id. */ + return 1; + } + return 0; /* not found */ +} + +static int tda9874a_initialize(struct CHIPSTATE *chip) +{ + if (tda9874a_SIF > 2) + tda9874a_SIF = 1; + if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist)) + tda9874a_STD = 0; + if(tda9874a_AMSEL > 1) + tda9874a_AMSEL = 0; + + if(tda9874a_SIF == 1) + tda9874a_GCONR = 0xc0; /* sound IF input 1 */ + else + tda9874a_GCONR = 0xc1; /* sound IF input 2 */ + + tda9874a_ESP = tda9874a_STD; + tda9874a_mode = (tda9874a_STD < 5) ? 0 : 1; + + if(tda9874a_AMSEL == 0) + tda9874a_NCONR = 0x01; /* auto-mute: analog mono input */ + else + tda9874a_NCONR = 0x05; /* auto-mute: 1st carrier FM or AM */ + + tda9874a_setup(chip); + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip description - defines+functions for tda9875 */ +/* The TDA9875 is made by Philips Semiconductor + * http://www.semiconductors.philips.com + * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator + * + */ + +/* subaddresses for TDA9875 */ +#define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/ +#define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */ +#define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/ +#define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/ + +#define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/ +#define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/ +#define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/ +#define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/ + +#define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/ +#define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/ +#define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/ +#define TDA9875_MVL 0x1a /* Main volume gauche */ +#define TDA9875_MVR 0x1b /* Main volume droite */ +#define TDA9875_MBA 0x1d /* Main Basse */ +#define TDA9875_MTR 0x1e /* Main treble */ +#define TDA9875_ACS 0x1f /* Auxiliary channel select (FM) 0b0000000*/ +#define TDA9875_AVL 0x20 /* Auxiliary volume gauche */ +#define TDA9875_AVR 0x21 /* Auxiliary volume droite */ +#define TDA9875_ABA 0x22 /* Auxiliary Basse */ +#define TDA9875_ATR 0x23 /* Auxiliary treble */ + +#define TDA9875_MSR 0x02 /* Monitor select register */ +#define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */ +#define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */ +#define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */ +#define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */ +#define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */ +#define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */ +#define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/ +#define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/ +#define TDA9875_FMAT 0x0b /* FM Matrix regirter*/ + +/* values */ +#define TDA9875_MUTE_ON 0xff /* general mute */ +#define TDA9875_MUTE_OFF 0xcc /* general no mute */ + +static int tda9875_initialize(struct CHIPSTATE *chip) +{ + chip_write(chip, TDA9875_CFG, 0xd0); /*reg de config 0 (reset)*/ + chip_write(chip, TDA9875_MSR, 0x03); /* Monitor 0b00000XXX*/ + chip_write(chip, TDA9875_C1MSB, 0x00); /*Car1(FM) MSB XMHz*/ + chip_write(chip, TDA9875_C1MIB, 0x00); /*Car1(FM) MIB XMHz*/ + chip_write(chip, TDA9875_C1LSB, 0x00); /*Car1(FM) LSB XMHz*/ + chip_write(chip, TDA9875_C2MSB, 0x00); /*Car2(NICAM) MSB XMHz*/ + chip_write(chip, TDA9875_C2MIB, 0x00); /*Car2(NICAM) MIB XMHz*/ + chip_write(chip, TDA9875_C2LSB, 0x00); /*Car2(NICAM) LSB XMHz*/ + chip_write(chip, TDA9875_DCR, 0x00); /*Demod config 0x00*/ + chip_write(chip, TDA9875_DEEM, 0x44); /*DE-Emph 0b0100 0100*/ + chip_write(chip, TDA9875_FMAT, 0x00); /*FM Matrix reg 0x00*/ + chip_write(chip, TDA9875_SC1, 0x00); /* SCART 1 (SC1)*/ + chip_write(chip, TDA9875_SC2, 0x01); /* SCART 2 (sc2)*/ + + chip_write(chip, TDA9875_CH1V, 0x10); /* Channel volume 1 mute*/ + chip_write(chip, TDA9875_CH2V, 0x10); /* Channel volume 2 mute */ + chip_write(chip, TDA9875_DACOS, 0x02); /* sig DAC i/o(in:nicam)*/ + chip_write(chip, TDA9875_ADCIS, 0x6f); /* sig ADC input(in:mono)*/ + chip_write(chip, TDA9875_LOSR, 0x00); /* line out (in:mono)*/ + chip_write(chip, TDA9875_AER, 0x00); /*06 Effect (AVL+PSEUDO) */ + chip_write(chip, TDA9875_MCS, 0x44); /* Main ch select (DAC) */ + chip_write(chip, TDA9875_MVL, 0x03); /* Vol Main left 10dB */ + chip_write(chip, TDA9875_MVR, 0x03); /* Vol Main right 10dB*/ + chip_write(chip, TDA9875_MBA, 0x00); /* Main Bass Main 0dB*/ + chip_write(chip, TDA9875_MTR, 0x00); /* Main Treble Main 0dB*/ + chip_write(chip, TDA9875_ACS, 0x44); /* Aux chan select (dac)*/ + chip_write(chip, TDA9875_AVL, 0x00); /* Vol Aux left 0dB*/ + chip_write(chip, TDA9875_AVR, 0x00); /* Vol Aux right 0dB*/ + chip_write(chip, TDA9875_ABA, 0x00); /* Aux Bass Main 0dB*/ + chip_write(chip, TDA9875_ATR, 0x00); /* Aux Aigus Main 0dB*/ + + chip_write(chip, TDA9875_MUT, 0xcc); /* General mute */ + return 0; +} + +static int tda9875_volume(int val) { return (unsigned char)(val / 602 - 84); } +static int tda9875_bass(int val) { return (unsigned char)(max(-12, val / 2115 - 15)); } +static int tda9875_treble(int val) { return (unsigned char)(val / 2622 - 12); } + +/* ----------------------------------------------------------------------- */ + + +/* *********************** * + * i2c interface functions * + * *********************** */ + +static int tda9875_checkit(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int dic, rev; + + dic = chip_read2(chip, 254); + rev = chip_read2(chip, 255); + + if (dic == 0 || dic == 2) { /* tda9875 and tda9875A */ + v4l2_info(sd, "found tda9875%s rev. %d.\n", + dic == 0 ? "" : "A", rev); + return 1; + } + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tea6420 */ + +#define TEA6300_VL 0x00 /* volume left */ +#define TEA6300_VR 0x01 /* volume right */ +#define TEA6300_BA 0x02 /* bass */ +#define TEA6300_TR 0x03 /* treble */ +#define TEA6300_FA 0x04 /* fader control */ +#define TEA6300_S 0x05 /* switch register */ + /* values for those registers: */ +#define TEA6300_S_SA 0x01 /* stereo A input */ +#define TEA6300_S_SB 0x02 /* stereo B */ +#define TEA6300_S_SC 0x04 /* stereo C */ +#define TEA6300_S_GMU 0x80 /* general mute */ + +#define TEA6320_V 0x00 /* volume (0-5)/loudness off (6)/zero crossing mute(7) */ +#define TEA6320_FFR 0x01 /* fader front right (0-5) */ +#define TEA6320_FFL 0x02 /* fader front left (0-5) */ +#define TEA6320_FRR 0x03 /* fader rear right (0-5) */ +#define TEA6320_FRL 0x04 /* fader rear left (0-5) */ +#define TEA6320_BA 0x05 /* bass (0-4) */ +#define TEA6320_TR 0x06 /* treble (0-4) */ +#define TEA6320_S 0x07 /* switch register */ + /* values for those registers: */ +#define TEA6320_S_SA 0x07 /* stereo A input */ +#define TEA6320_S_SB 0x06 /* stereo B */ +#define TEA6320_S_SC 0x05 /* stereo C */ +#define TEA6320_S_SD 0x04 /* stereo D */ +#define TEA6320_S_GMU 0x80 /* general mute */ + +#define TEA6420_S_SA 0x00 /* stereo A input */ +#define TEA6420_S_SB 0x01 /* stereo B */ +#define TEA6420_S_SC 0x02 /* stereo C */ +#define TEA6420_S_SD 0x03 /* stereo D */ +#define TEA6420_S_SE 0x04 /* stereo E */ +#define TEA6420_S_GMU 0x05 /* general mute */ + +static int tea6300_shift10(int val) { return val >> 10; } +static int tea6300_shift12(int val) { return val >> 12; } + +/* Assumes 16bit input (values 0x3f to 0x0c are unique, values less than */ +/* 0x0c mirror those immediately higher) */ +static int tea6320_volume(int val) { return (val / (65535/(63-12)) + 12) & 0x3f; } +static int tea6320_shift11(int val) { return val >> 11; } +static int tea6320_initialize(struct CHIPSTATE * chip) +{ + chip_write(chip, TEA6320_FFR, 0x3f); + chip_write(chip, TEA6320_FFL, 0x3f); + chip_write(chip, TEA6320_FRR, 0x3f); + chip_write(chip, TEA6320_FRL, 0x3f); + + return 0; +} + + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tda8425 */ + +#define TDA8425_VL 0x00 /* volume left */ +#define TDA8425_VR 0x01 /* volume right */ +#define TDA8425_BA 0x02 /* bass */ +#define TDA8425_TR 0x03 /* treble */ +#define TDA8425_S1 0x08 /* switch functions */ + /* values for those registers: */ +#define TDA8425_S1_OFF 0xEE /* audio off (mute on) */ +#define TDA8425_S1_CH1 0xCE /* audio channel 1 (mute off) - "linear stereo" mode */ +#define TDA8425_S1_CH2 0xCF /* audio channel 2 (mute off) - "linear stereo" mode */ +#define TDA8425_S1_MU 0x20 /* mute bit */ +#define TDA8425_S1_STEREO 0x18 /* stereo bits */ +#define TDA8425_S1_STEREO_SPATIAL 0x18 /* spatial stereo */ +#define TDA8425_S1_STEREO_LINEAR 0x08 /* linear stereo */ +#define TDA8425_S1_STEREO_PSEUDO 0x10 /* pseudo stereo */ +#define TDA8425_S1_STEREO_MONO 0x00 /* forced mono */ +#define TDA8425_S1_ML 0x06 /* language selector */ +#define TDA8425_S1_ML_SOUND_A 0x02 /* sound a */ +#define TDA8425_S1_ML_SOUND_B 0x04 /* sound b */ +#define TDA8425_S1_ML_STEREO 0x06 /* stereo */ +#define TDA8425_S1_IS 0x01 /* channel selector */ + + +static int tda8425_shift10(int val) { return (val >> 10) | 0xc0; } +static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } + +static void tda8425_setaudmode(struct CHIPSTATE *chip, int mode) +{ + int s1 = chip->shadow.bytes[TDA8425_S1+1] & 0xe1; + + switch (mode) { + case V4L2_TUNER_MODE_LANG1: + s1 |= TDA8425_S1_ML_SOUND_A; + s1 |= TDA8425_S1_STEREO_PSEUDO; + break; + case V4L2_TUNER_MODE_LANG2: + s1 |= TDA8425_S1_ML_SOUND_B; + s1 |= TDA8425_S1_STEREO_PSEUDO; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + s1 |= TDA8425_S1_ML_STEREO; + s1 |= TDA8425_S1_STEREO_LINEAR; + break; + case V4L2_TUNER_MODE_MONO: + s1 |= TDA8425_S1_ML_STEREO; + s1 |= TDA8425_S1_STEREO_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + s1 |= TDA8425_S1_ML_STEREO; + s1 |= TDA8425_S1_STEREO_SPATIAL; + break; + default: + return; + } + chip_write(chip,TDA8425_S1,s1); +} + + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for pic16c54 (PV951) */ + +/* the registers of 16C54, I2C sub address. */ +#define PIC16C54_REG_KEY_CODE 0x01 /* Not use. */ +#define PIC16C54_REG_MISC 0x02 + +/* bit definition of the RESET register, I2C data. */ +#define PIC16C54_MISC_RESET_REMOTE_CTL 0x01 /* bit 0, Reset to receive the key */ + /* code of remote controller */ +#define PIC16C54_MISC_MTS_MAIN 0x02 /* bit 1 */ +#define PIC16C54_MISC_MTS_SAP 0x04 /* bit 2 */ +#define PIC16C54_MISC_MTS_BOTH 0x08 /* bit 3 */ +#define PIC16C54_MISC_SND_MUTE 0x10 /* bit 4, Mute Audio(Line-in and Tuner) */ +#define PIC16C54_MISC_SND_NOTMUTE 0x20 /* bit 5 */ +#define PIC16C54_MISC_SWITCH_TUNER 0x40 /* bit 6 , Switch to Line-in */ +#define PIC16C54_MISC_SWITCH_LINE 0x80 /* bit 7 , Switch to Tuner */ + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for TA8874Z */ + +/* write 1st byte */ +#define TA8874Z_LED_STE 0x80 +#define TA8874Z_LED_BIL 0x40 +#define TA8874Z_LED_EXT 0x20 +#define TA8874Z_MONO_SET 0x10 +#define TA8874Z_MUTE 0x08 +#define TA8874Z_F_MONO 0x04 +#define TA8874Z_MODE_SUB 0x02 +#define TA8874Z_MODE_MAIN 0x01 + +/* write 2nd byte */ +/*#define TA8874Z_TI 0x80 */ /* test mode */ +#define TA8874Z_SEPARATION 0x3f +#define TA8874Z_SEPARATION_DEFAULT 0x10 + +/* read */ +#define TA8874Z_B1 0x80 +#define TA8874Z_B0 0x40 +#define TA8874Z_CHAG_FLAG 0x20 + +/* + * B1 B0 + * mono L H + * stereo L L + * BIL H L + */ +static int ta8874z_getrxsubchans(struct CHIPSTATE *chip) +{ + int val, mode; + + val = chip_read(chip); + mode = V4L2_TUNER_SUB_MONO; + if (val & TA8874Z_B1){ + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + }else if (!(val & TA8874Z_B0)){ + mode = V4L2_TUNER_SUB_STEREO; + } + /* v4l2_dbg(1, debug, &chip->sd, + "ta8874z_getrxsubchans(): raw chip read: 0x%02x, return: 0x%02x\n", + val, mode); */ + return mode; +} + +static audiocmd ta8874z_stereo = { 2, {0, TA8874Z_SEPARATION_DEFAULT}}; +static audiocmd ta8874z_mono = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}; +static audiocmd ta8874z_main = {2, { 0, TA8874Z_SEPARATION_DEFAULT}}; +static audiocmd ta8874z_sub = {2, { TA8874Z_MODE_SUB, TA8874Z_SEPARATION_DEFAULT}}; +static audiocmd ta8874z_both = {2, { TA8874Z_MODE_MAIN | TA8874Z_MODE_SUB, TA8874Z_SEPARATION_DEFAULT}}; + +static void ta8874z_setaudmode(struct CHIPSTATE *chip, int mode) +{ + struct v4l2_subdev *sd = &chip->sd; + int update = 1; + audiocmd *t = NULL; + + v4l2_dbg(1, debug, sd, "ta8874z_setaudmode(): mode: 0x%02x\n", mode); + + switch(mode){ + case V4L2_TUNER_MODE_MONO: + t = &ta8874z_mono; + break; + case V4L2_TUNER_MODE_STEREO: + t = &ta8874z_stereo; + break; + case V4L2_TUNER_MODE_LANG1: + t = &ta8874z_main; + break; + case V4L2_TUNER_MODE_LANG2: + t = &ta8874z_sub; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + t = &ta8874z_both; + break; + default: + update = 0; + } + + if(update) + chip_cmd(chip, "TA8874Z", t); +} + +static int ta8874z_checkit(struct CHIPSTATE *chip) +{ + int rc; + rc = chip_read(chip); + return ((rc & 0x1f) == 0x1f) ? 1 : 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - struct CHIPDESC */ + +/* insmod options to enable/disable individual audio chips */ +static int tda8425 = 1; +static int tda9840 = 1; +static int tda9850 = 1; +static int tda9855 = 1; +static int tda9873 = 1; +static int tda9874a = 1; +static int tda9875 = 1; +static int tea6300; /* default 0 - address clash with msp34xx */ +static int tea6320; /* default 0 - address clash with msp34xx */ +static int tea6420 = 1; +static int pic16c54 = 1; +static int ta8874z; /* default 0 - address clash with tda9840 */ + +module_param(tda8425, int, 0444); +module_param(tda9840, int, 0444); +module_param(tda9850, int, 0444); +module_param(tda9855, int, 0444); +module_param(tda9873, int, 0444); +module_param(tda9874a, int, 0444); +module_param(tda9875, int, 0444); +module_param(tea6300, int, 0444); +module_param(tea6320, int, 0444); +module_param(tea6420, int, 0444); +module_param(pic16c54, int, 0444); +module_param(ta8874z, int, 0444); + +static struct CHIPDESC chiplist[] = { + { + .name = "tda9840", + .insmodopt = &tda9840, + .addr_lo = I2C_ADDR_TDA9840 >> 1, + .addr_hi = I2C_ADDR_TDA9840 >> 1, + .registers = 5, + .flags = CHIP_NEED_CHECKMODE, + + /* callbacks */ + .checkit = tda9840_checkit, + .getrxsubchans = tda9840_getrxsubchans, + .setaudmode = tda9840_setaudmode, + + .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN + /* ,TDA9840_SW, TDA9840_MONO */} } + }, + { + .name = "tda9873h", + .insmodopt = &tda9873, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, + .registers = 3, + .flags = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE, + + /* callbacks */ + .checkit = tda9873_checkit, + .getrxsubchans = tda9873_getrxsubchans, + .setaudmode = tda9873_setaudmode, + + .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, + .inputreg = TDA9873_SW, + .inputmute = TDA9873_MUTE | TDA9873_AUTOMUTE, + .inputmap = {0xa0, 0xa2, 0xa0, 0xa0}, + .inputmask = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE, + + }, + { + .name = "tda9874h/a", + .insmodopt = &tda9874a, + .addr_lo = I2C_ADDR_TDA9874 >> 1, + .addr_hi = I2C_ADDR_TDA9874 >> 1, + .flags = CHIP_NEED_CHECKMODE, + + /* callbacks */ + .initialize = tda9874a_initialize, + .checkit = tda9874a_checkit, + .getrxsubchans = tda9874a_getrxsubchans, + .setaudmode = tda9874a_setaudmode, + }, + { + .name = "tda9875", + .insmodopt = &tda9875, + .addr_lo = I2C_ADDR_TDA9875 >> 1, + .addr_hi = I2C_ADDR_TDA9875 >> 1, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE, + + /* callbacks */ + .initialize = tda9875_initialize, + .checkit = tda9875_checkit, + .volfunc = tda9875_volume, + .bassfunc = tda9875_bass, + .treblefunc = tda9875_treble, + .leftreg = TDA9875_MVL, + .rightreg = TDA9875_MVR, + .bassreg = TDA9875_MBA, + .treblereg = TDA9875_MTR, + .volinit = 58880, + }, + { + .name = "tda9850", + .insmodopt = &tda9850, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, + .registers = 11, + + .getrxsubchans = tda985x_getrxsubchans, + .setaudmode = tda985x_setaudmode, + + .init = { 8, { TDA9850_C4, 0x08, 0x08, TDA985x_STEREO, 0x07, 0x10, 0x10, 0x03 } } + }, + { + .name = "tda9855", + .insmodopt = &tda9855, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, + .registers = 11, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE, + + .leftreg = TDA9855_VL, + .rightreg = TDA9855_VR, + .bassreg = TDA9855_BA, + .treblereg = TDA9855_TR, + + /* callbacks */ + .volfunc = tda9855_volume, + .bassfunc = tda9855_bass, + .treblefunc = tda9855_treble, + .getrxsubchans = tda985x_getrxsubchans, + .setaudmode = tda985x_setaudmode, + + .init = { 12, { 0, 0x6f, 0x6f, 0x0e, 0x07<<1, 0x8<<2, + TDA9855_MUTE | TDA9855_AVL | TDA9855_LOUD | TDA9855_INT, + TDA985x_STEREO | TDA9855_LINEAR | TDA9855_TZCM | TDA9855_VZCM, + 0x07, 0x10, 0x10, 0x03 }} + }, + { + .name = "tea6300", + .insmodopt = &tea6300, + .addr_lo = I2C_ADDR_TEA6300 >> 1, + .addr_hi = I2C_ADDR_TEA6300 >> 1, + .registers = 6, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, + + .leftreg = TEA6300_VR, + .rightreg = TEA6300_VL, + .bassreg = TEA6300_BA, + .treblereg = TEA6300_TR, + + /* callbacks */ + .volfunc = tea6300_shift10, + .bassfunc = tea6300_shift12, + .treblefunc = tea6300_shift12, + + .inputreg = TEA6300_S, + .inputmap = { TEA6300_S_SA, TEA6300_S_SB, TEA6300_S_SC }, + .inputmute = TEA6300_S_GMU, + }, + { + .name = "tea6320", + .insmodopt = &tea6320, + .addr_lo = I2C_ADDR_TEA6300 >> 1, + .addr_hi = I2C_ADDR_TEA6300 >> 1, + .registers = 8, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, + + .leftreg = TEA6320_V, + .rightreg = TEA6320_V, + .bassreg = TEA6320_BA, + .treblereg = TEA6320_TR, + + /* callbacks */ + .initialize = tea6320_initialize, + .volfunc = tea6320_volume, + .bassfunc = tea6320_shift11, + .treblefunc = tea6320_shift11, + + .inputreg = TEA6320_S, + .inputmap = { TEA6320_S_SA, TEA6420_S_SB, TEA6300_S_SC, TEA6320_S_SD }, + .inputmute = TEA6300_S_GMU, + }, + { + .name = "tea6420", + .insmodopt = &tea6420, + .addr_lo = I2C_ADDR_TEA6420 >> 1, + .addr_hi = I2C_ADDR_TEA6420 >> 1, + .registers = 1, + .flags = CHIP_HAS_INPUTSEL, + + .inputreg = -1, + .inputmap = { TEA6420_S_SA, TEA6420_S_SB, TEA6420_S_SC }, + .inputmute = TEA6420_S_GMU, + .inputmask = 0x07, + }, + { + .name = "tda8425", + .insmodopt = &tda8425, + .addr_lo = I2C_ADDR_TDA8425 >> 1, + .addr_hi = I2C_ADDR_TDA8425 >> 1, + .registers = 9, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, + + .leftreg = TDA8425_VL, + .rightreg = TDA8425_VR, + .bassreg = TDA8425_BA, + .treblereg = TDA8425_TR, + + /* callbacks */ + .volfunc = tda8425_shift10, + .bassfunc = tda8425_shift12, + .treblefunc = tda8425_shift12, + .setaudmode = tda8425_setaudmode, + + .inputreg = TDA8425_S1, + .inputmap = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 }, + .inputmute = TDA8425_S1_OFF, + + }, + { + .name = "pic16c54 (PV951)", + .insmodopt = &pic16c54, + .addr_lo = I2C_ADDR_PIC16C54 >> 1, + .addr_hi = I2C_ADDR_PIC16C54>> 1, + .registers = 2, + .flags = CHIP_HAS_INPUTSEL, + + .inputreg = PIC16C54_REG_MISC, + .inputmap = {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER, + PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE, + PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE, + PIC16C54_MISC_SND_MUTE}, + .inputmute = PIC16C54_MISC_SND_MUTE, + }, + { + .name = "ta8874z", + .checkit = ta8874z_checkit, + .insmodopt = &ta8874z, + .addr_lo = I2C_ADDR_TDA9840 >> 1, + .addr_hi = I2C_ADDR_TDA9840 >> 1, + .registers = 2, + + /* callbacks */ + .getrxsubchans = ta8874z_getrxsubchans, + .setaudmode = ta8874z_setaudmode, + + .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, + }, + { .name = NULL } /* EOF */ +}; + + +/* ---------------------------------------------------------------------- */ + +static int tvaudio_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + chip->muted = ctrl->val; + if (chip->muted) + chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask); + else + chip_write_masked(chip,desc->inputreg, + desc->inputmap[chip->input],desc->inputmask); + return 0; + case V4L2_CID_AUDIO_VOLUME: { + u32 volume, balance; + u32 left, right; + + volume = chip->volume->val; + balance = chip->balance->val; + left = (min(65536U - balance, 32768U) * volume) / 32768U; + right = (min(balance, 32768U) * volume) / 32768U; + + chip_write(chip, desc->leftreg, desc->volfunc(left)); + chip_write(chip, desc->rightreg, desc->volfunc(right)); + return 0; + } + case V4L2_CID_AUDIO_BASS: + chip_write(chip, desc->bassreg, desc->bassfunc(ctrl->val)); + return 0; + case V4L2_CID_AUDIO_TREBLE: + chip_write(chip, desc->treblereg, desc->treblefunc(ctrl->val)); + return 0; + } + return -EINVAL; +} + + +/* ---------------------------------------------------------------------- */ +/* video4linux interface */ + +static int tvaudio_s_radio(struct v4l2_subdev *sd) +{ + struct CHIPSTATE *chip = to_state(sd); + + chip->radio = 1; + /* del_timer(&chip->wt); */ + return 0; +} + +static int tvaudio_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + if (!(desc->flags & CHIP_HAS_INPUTSEL)) + return 0; + if (input >= 4) + return -EINVAL; + /* There are four inputs: tuner, radio, extern and intern. */ + chip->input = input; + if (chip->muted) + return 0; + chip_write_masked(chip, desc->inputreg, + desc->inputmap[chip->input], desc->inputmask); + return 0; +} + +static int tvaudio_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + if (!desc->setaudmode) + return 0; + if (chip->radio) + return 0; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + case V4L2_TUNER_MODE_LANG2: + case V4L2_TUNER_MODE_LANG1_LANG2: + break; + default: + return -EINVAL; + } + chip->audmode = vt->audmode; + + if (chip->thread) + wake_up_process(chip->thread); + else + desc->setaudmode(chip, vt->audmode); + + return 0; +} + +static int tvaudio_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + if (!desc->getrxsubchans) + return 0; + if (chip->radio) + return 0; + + vt->audmode = chip->audmode; + vt->rxsubchans = desc->getrxsubchans(chip); + vt->capability |= V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; + + return 0; +} + +static int tvaudio_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct CHIPSTATE *chip = to_state(sd); + + chip->radio = 0; + return 0; +} + +static int tvaudio_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *freq) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + /* For chips that provide getrxsubchans and setaudmode, and doesn't + automatically follows the stereo carrier, a kthread is + created to set the audio standard. In this case, when then + the video channel is changed, tvaudio starts on MONO mode. + After waiting for 2 seconds, the kernel thread is called, + to follow whatever audio standard is pointed by the + audio carrier. + */ + if (chip->thread) { + desc->setaudmode(chip, V4L2_TUNER_MODE_MONO); + chip->prevmode = -1; /* reset previous mode */ + mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); + } + return 0; +} + +static int tvaudio_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVAUDIO, 0); +} + +static int tvaudio_log_status(struct v4l2_subdev *sd) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + v4l2_info(sd, "Chip: %s\n", desc->name); + v4l2_ctrl_handler_log_status(&chip->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops tvaudio_ctrl_ops = { + .s_ctrl = tvaudio_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tvaudio_core_ops = { + .log_status = tvaudio_log_status, + .g_chip_ident = tvaudio_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = tvaudio_s_std, +}; + +static const struct v4l2_subdev_tuner_ops tvaudio_tuner_ops = { + .s_radio = tvaudio_s_radio, + .s_frequency = tvaudio_s_frequency, + .s_tuner = tvaudio_s_tuner, + .g_tuner = tvaudio_g_tuner, +}; + +static const struct v4l2_subdev_audio_ops tvaudio_audio_ops = { + .s_routing = tvaudio_s_routing, +}; + +static const struct v4l2_subdev_ops tvaudio_ops = { + .core = &tvaudio_core_ops, + .tuner = &tvaudio_tuner_ops, + .audio = &tvaudio_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + + +/* i2c registration */ + +static int tvaudio_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct CHIPSTATE *chip; + struct CHIPDESC *desc; + struct v4l2_subdev *sd; + + if (debug) { + printk(KERN_INFO "tvaudio: TV audio decoder + audio/video mux driver\n"); + printk(KERN_INFO "tvaudio: known chips: "); + for (desc = chiplist; desc->name != NULL; desc++) + printk("%s%s", (desc == chiplist) ? "" : ", ", desc->name); + printk("\n"); + } + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + sd = &chip->sd; + v4l2_i2c_subdev_init(sd, client, &tvaudio_ops); + + /* find description for the chip */ + v4l2_dbg(1, debug, sd, "chip found @ 0x%x\n", client->addr<<1); + for (desc = chiplist; desc->name != NULL; desc++) { + if (0 == *(desc->insmodopt)) + continue; + if (client->addr < desc->addr_lo || + client->addr > desc->addr_hi) + continue; + if (desc->checkit && !desc->checkit(chip)) + continue; + break; + } + if (desc->name == NULL) { + v4l2_dbg(1, debug, sd, "no matching chip description found\n"); + kfree(chip); + return -EIO; + } + v4l2_info(sd, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name); + if (desc->flags) { + v4l2_dbg(1, debug, sd, "matches:%s%s%s.\n", + (desc->flags & CHIP_HAS_VOLUME) ? " volume" : "", + (desc->flags & CHIP_HAS_BASSTREBLE) ? " bass/treble" : "", + (desc->flags & CHIP_HAS_INPUTSEL) ? " audiomux" : ""); + } + + /* fill required data structures */ + if (!id) + strlcpy(client->name, desc->name, I2C_NAME_SIZE); + chip->desc = desc; + chip->shadow.count = desc->registers+1; + chip->prevmode = -1; + chip->audmode = V4L2_TUNER_MODE_LANG1; + + /* initialization */ + if (desc->initialize != NULL) + desc->initialize(chip); + else + chip_cmd(chip, "init", &desc->init); + + v4l2_ctrl_handler_init(&chip->hdl, 5); + if (desc->flags & CHIP_HAS_INPUTSEL) + v4l2_ctrl_new_std(&chip->hdl, &tvaudio_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + if (desc->flags & CHIP_HAS_VOLUME) { + if (!desc->volfunc) { + /* This shouldn't be happen. Warn user, but keep working + without volume controls + */ + v4l2_info(sd, "volume callback undefined!\n"); + desc->flags &= ~CHIP_HAS_VOLUME; + } else { + chip->volume = v4l2_ctrl_new_std(&chip->hdl, + &tvaudio_ctrl_ops, V4L2_CID_AUDIO_VOLUME, + 0, 65535, 65535 / 100, + desc->volinit ? desc->volinit : 65535); + chip->balance = v4l2_ctrl_new_std(&chip->hdl, + &tvaudio_ctrl_ops, V4L2_CID_AUDIO_BALANCE, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_cluster(2, &chip->volume); + } + } + if (desc->flags & CHIP_HAS_BASSTREBLE) { + if (!desc->bassfunc || !desc->treblefunc) { + /* This shouldn't be happen. Warn user, but keep working + without bass/treble controls + */ + v4l2_info(sd, "bass/treble callbacks undefined!\n"); + desc->flags &= ~CHIP_HAS_BASSTREBLE; + } else { + v4l2_ctrl_new_std(&chip->hdl, + &tvaudio_ctrl_ops, V4L2_CID_AUDIO_BASS, + 0, 65535, 65535 / 100, + desc->bassinit ? desc->bassinit : 32768); + v4l2_ctrl_new_std(&chip->hdl, + &tvaudio_ctrl_ops, V4L2_CID_AUDIO_TREBLE, + 0, 65535, 65535 / 100, + desc->trebleinit ? desc->trebleinit : 32768); + } + } + + sd->ctrl_handler = &chip->hdl; + if (chip->hdl.error) { + int err = chip->hdl.error; + + v4l2_ctrl_handler_free(&chip->hdl); + kfree(chip); + return err; + } + /* set controls to the default values */ + v4l2_ctrl_handler_setup(&chip->hdl); + + chip->thread = NULL; + init_timer(&chip->wt); + if (desc->flags & CHIP_NEED_CHECKMODE) { + if (!desc->getrxsubchans || !desc->setaudmode) { + /* This shouldn't be happen. Warn user, but keep working + without kthread + */ + v4l2_info(sd, "set/get mode callbacks undefined!\n"); + return 0; + } + /* start async thread */ + chip->wt.function = chip_thread_wake; + chip->wt.data = (unsigned long)chip; + chip->thread = kthread_run(chip_thread, chip, client->name); + if (IS_ERR(chip->thread)) { + v4l2_warn(sd, "failed to create kthread\n"); + chip->thread = NULL; + } + } + return 0; +} + +static int tvaudio_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct CHIPSTATE *chip = to_state(sd); + + del_timer_sync(&chip->wt); + if (chip->thread) { + /* shutdown async thread */ + kthread_stop(chip->thread); + chip->thread = NULL; + } + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&chip->hdl); + kfree(chip); + return 0; +} + +/* This driver supports many devices and the idea is to let the driver + detect which device is present. So rather than listing all supported + devices here, we pretend to support a single, fake device type. */ +static const struct i2c_device_id tvaudio_id[] = { + { "tvaudio", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tvaudio_id); + +static struct i2c_driver tvaudio_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tvaudio", + }, + .probe = tvaudio_probe, + .remove = tvaudio_remove, + .id_table = tvaudio_id, +}; + +module_i2c_driver(tvaudio_driver); diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c new file mode 100644 index 00000000..ab8f3fee --- /dev/null +++ b/drivers/media/i2c/tvp514x.c @@ -0,0 +1,1244 @@ +/* + * drivers/media/i2c/tvp514x.c + * + * TI TVP5146/47 decoder driver + * + * Copyright (C) 2008 Texas Instruments Inc + * Author: Vaibhav Hiremath + * + * Contributors: + * Sivaraj R + * Brijesh R Jadav + * Hardik Shah + * Manjunath Hadli + * Karicheri Muralidharan + * Prabhakar Lad + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "tvp514x_regs.h" + +/* Private macros for TVP */ +#define I2C_RETRY_COUNT (5) +#define LOCK_RETRY_COUNT (5) +#define LOCK_RETRY_DELAY (200) + +/* Debug functions */ +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("TVP514X linux decoder driver"); +MODULE_LICENSE("GPL"); + +/* enum tvp514x_std - enum for supported standards */ +enum tvp514x_std { + STD_NTSC_MJ = 0, + STD_PAL_BDGHIN, + STD_INVALID +}; + +/** + * struct tvp514x_std_info - Structure to store standard informations + * @width: Line width in pixels + * @height:Number of active lines + * @video_std: Value to write in REG_VIDEO_STD register + * @standard: v4l2 standard structure information + */ +struct tvp514x_std_info { + unsigned long width; + unsigned long height; + u8 video_std; + struct v4l2_standard standard; +}; + +static struct tvp514x_reg tvp514x_reg_list_default[0x40]; + +static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable); +/** + * struct tvp514x_decoder - TVP5146/47 decoder object + * @sd: Subdevice Slave handle + * @tvp514x_regs: copy of hw's regs with preset values. + * @pdata: Board specific + * @ver: Chip version + * @streaming: TVP5146/47 decoder streaming - enabled or disabled. + * @pix: Current pixel format + * @num_fmts: Number of formats + * @fmt_list: Format list + * @current_std: Current standard + * @num_stds: Number of standards + * @std_list: Standards list + * @input: Input routing at chip level + * @output: Output routing at chip level + */ +struct tvp514x_decoder { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; + const struct tvp514x_platform_data *pdata; + + int ver; + int streaming; + + struct v4l2_pix_format pix; + int num_fmts; + const struct v4l2_fmtdesc *fmt_list; + + enum tvp514x_std current_std; + int num_stds; + const struct tvp514x_std_info *std_list; + /* Input and Output Routing parameters */ + u32 input; + u32 output; + + /* mc related members */ + struct media_pad pad; + struct v4l2_mbus_framefmt format; +}; + +/* TVP514x default register values */ +static struct tvp514x_reg tvp514x_reg_list_default[] = { + /* Composite selected */ + {TOK_WRITE, REG_INPUT_SEL, 0x05}, + {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, + /* Auto mode */ + {TOK_WRITE, REG_VIDEO_STD, 0x00}, + {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F}, + {TOK_WRITE, REG_COLOR_KILLER, 0x10}, + {TOK_WRITE, REG_LUMA_CONTROL1, 0x00}, + {TOK_WRITE, REG_LUMA_CONTROL2, 0x00}, + {TOK_WRITE, REG_LUMA_CONTROL3, 0x02}, + {TOK_WRITE, REG_BRIGHTNESS, 0x80}, + {TOK_WRITE, REG_CONTRAST, 0x80}, + {TOK_WRITE, REG_SATURATION, 0x80}, + {TOK_WRITE, REG_HUE, 0x00}, + {TOK_WRITE, REG_CHROMA_CONTROL1, 0x00}, + {TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E}, + /* Reserved */ + {TOK_SKIP, 0x0F, 0x00}, + {TOK_WRITE, REG_COMP_PR_SATURATION, 0x80}, + {TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80}, + {TOK_WRITE, REG_COMP_PB_SATURATION, 0x80}, + /* Reserved */ + {TOK_SKIP, 0x13, 0x00}, + {TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80}, + /* Reserved */ + {TOK_SKIP, 0x15, 0x00}, + /* NTSC timing */ + {TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55}, + {TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00}, + {TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25}, + {TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03}, + /* NTSC timing */ + {TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00}, + {TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00}, + {TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40}, + {TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00}, + /* NTSC timing */ + {TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04}, + {TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00}, + {TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07}, + {TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00}, + /* NTSC timing */ + {TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01}, + {TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00}, + {TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15}, + {TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x26, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x27, 0x00}, + {TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC}, + /* Reserved */ + {TOK_SKIP, 0x29, 0x00}, + {TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x2B, 0x00}, + {TOK_SKIP, REG_SCART_DELAY, 0x00}, + {TOK_SKIP, REG_CTI_DELAY, 0x00}, + {TOK_SKIP, REG_CTI_CONTROL, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x2F, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x30, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x31, 0x00}, + /* HS, VS active high */ + {TOK_WRITE, REG_SYNC_CONTROL, 0x00}, + /* 10-bit BT.656 */ + {TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00}, + /* Enable clk & data */ + {TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11}, + /* Enable AVID & FLD */ + {TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE}, + /* Enable VS & HS */ + {TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF}, + {TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF}, + {TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF}, + /* Clear status */ + {TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01}, + {TOK_TERM, 0, 0}, +}; + +/** + * List of image formats supported by TVP5146/47 decoder + * Currently we are using 8 bit mode only, but can be + * extended to 10/20 bit mode. + */ +static const struct v4l2_fmtdesc tvp514x_fmt_list[] = { + { + .index = 0, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .flags = 0, + .description = "8-bit UYVY 4:2:2 Format", + .pixelformat = V4L2_PIX_FMT_UYVY, + }, +}; + +/** + * Supported standards - + * + * Currently supports two standards only, need to add support for rest of the + * modes, like SECAM, etc... + */ +static const struct tvp514x_std_info tvp514x_std_list[] = { + /* Standard: STD_NTSC_MJ */ + [STD_NTSC_MJ] = { + .width = NTSC_NUM_ACTIVE_PIXELS, + .height = NTSC_NUM_ACTIVE_LINES, + .video_std = VIDEO_STD_NTSC_MJ_BIT, + .standard = { + .index = 0, + .id = V4L2_STD_NTSC, + .name = "NTSC", + .frameperiod = {1001, 30000}, + .framelines = 525 + }, + /* Standard: STD_PAL_BDGHIN */ + }, + [STD_PAL_BDGHIN] = { + .width = PAL_NUM_ACTIVE_PIXELS, + .height = PAL_NUM_ACTIVE_LINES, + .video_std = VIDEO_STD_PAL_BDGHIN_BIT, + .standard = { + .index = 1, + .id = V4L2_STD_PAL, + .name = "PAL", + .frameperiod = {1, 25}, + .framelines = 625 + }, + }, + /* Standard: need to add for additional standard */ +}; + + +static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tvp514x_decoder, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp514x_decoder, hdl)->sd; +} + + +/** + * tvp514x_read_reg() - Read a value from a register in an TVP5146/47. + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + * + * Returns value read if successful, or non-zero (-1) otherwise. + */ +static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg) +{ + int err, retry = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + +read_again: + + err = i2c_smbus_read_byte_data(client, reg); + if (err < 0) { + if (retry <= I2C_RETRY_COUNT) { + v4l2_warn(sd, "Read: retry ... %d\n", retry); + retry++; + msleep_interruptible(10); + goto read_again; + } + } + + return err; +} + +/** + * dump_reg() - dump the register content of TVP5146/47. + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + */ +static void dump_reg(struct v4l2_subdev *sd, u8 reg) +{ + u32 val; + + val = tvp514x_read_reg(sd, reg); + v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val); +} + +/** + * tvp514x_write_reg() - Write a value to a register in TVP5146/47 + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + * @val: value to be written to the register + * + * Write a value to a register in an TVP5146/47 decoder device. + * Returns zero if successful, or non-zero otherwise. + */ +static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + int err, retry = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + +write_again: + + err = i2c_smbus_write_byte_data(client, reg, val); + if (err) { + if (retry <= I2C_RETRY_COUNT) { + v4l2_warn(sd, "Write: retry ... %d\n", retry); + retry++; + msleep_interruptible(10); + goto write_again; + } + } + + return err; +} + +/** + * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers + * @sd: ptr to v4l2_subdev struct + * @reglist: list of TVP5146/47 registers and values + * + * Initializes a list of TVP5146/47 registers:- + * if token is TOK_TERM, then entire write operation terminates + * if token is TOK_DELAY, then a delay of 'val' msec is introduced + * if token is TOK_SKIP, then the register write is skipped + * if token is TOK_WRITE, then the register write is performed + * Returns zero if successful, or non-zero otherwise. + */ +static int tvp514x_write_regs(struct v4l2_subdev *sd, + const struct tvp514x_reg reglist[]) +{ + int err; + const struct tvp514x_reg *next = reglist; + + for (; next->token != TOK_TERM; next++) { + if (next->token == TOK_DELAY) { + msleep(next->val); + continue; + } + + if (next->token == TOK_SKIP) + continue; + + err = tvp514x_write_reg(sd, next->reg, (u8) next->val); + if (err) { + v4l2_err(sd, "Write failed. Err[%d]\n", err); + return err; + } + } + return 0; +} + +/** + * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47 + * @sd: ptr to v4l2_subdev struct + * + * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no + * standard detected. + */ +static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd) +{ + u8 std, std_status; + + std = tvp514x_read_reg(sd, REG_VIDEO_STD); + if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT) + /* use the standard status register */ + std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS); + else + /* use the standard register itself */ + std_status = std; + + switch (std_status & VIDEO_STD_MASK) { + case VIDEO_STD_NTSC_MJ_BIT: + return STD_NTSC_MJ; + + case VIDEO_STD_PAL_BDGHIN_BIT: + return STD_PAL_BDGHIN; + + default: + return STD_INVALID; + } + + return STD_INVALID; +} + +/* TVP5146/47 register dump function */ +static void tvp514x_reg_dump(struct v4l2_subdev *sd) +{ + dump_reg(sd, REG_INPUT_SEL); + dump_reg(sd, REG_AFE_GAIN_CTRL); + dump_reg(sd, REG_VIDEO_STD); + dump_reg(sd, REG_OPERATION_MODE); + dump_reg(sd, REG_COLOR_KILLER); + dump_reg(sd, REG_LUMA_CONTROL1); + dump_reg(sd, REG_LUMA_CONTROL2); + dump_reg(sd, REG_LUMA_CONTROL3); + dump_reg(sd, REG_BRIGHTNESS); + dump_reg(sd, REG_CONTRAST); + dump_reg(sd, REG_SATURATION); + dump_reg(sd, REG_HUE); + dump_reg(sd, REG_CHROMA_CONTROL1); + dump_reg(sd, REG_CHROMA_CONTROL2); + dump_reg(sd, REG_COMP_PR_SATURATION); + dump_reg(sd, REG_COMP_Y_CONTRAST); + dump_reg(sd, REG_COMP_PB_SATURATION); + dump_reg(sd, REG_COMP_Y_BRIGHTNESS); + dump_reg(sd, REG_AVID_START_PIXEL_LSB); + dump_reg(sd, REG_AVID_START_PIXEL_MSB); + dump_reg(sd, REG_AVID_STOP_PIXEL_LSB); + dump_reg(sd, REG_AVID_STOP_PIXEL_MSB); + dump_reg(sd, REG_HSYNC_START_PIXEL_LSB); + dump_reg(sd, REG_HSYNC_START_PIXEL_MSB); + dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB); + dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB); + dump_reg(sd, REG_VSYNC_START_LINE_LSB); + dump_reg(sd, REG_VSYNC_START_LINE_MSB); + dump_reg(sd, REG_VSYNC_STOP_LINE_LSB); + dump_reg(sd, REG_VSYNC_STOP_LINE_MSB); + dump_reg(sd, REG_VBLK_START_LINE_LSB); + dump_reg(sd, REG_VBLK_START_LINE_MSB); + dump_reg(sd, REG_VBLK_STOP_LINE_LSB); + dump_reg(sd, REG_VBLK_STOP_LINE_MSB); + dump_reg(sd, REG_SYNC_CONTROL); + dump_reg(sd, REG_OUTPUT_FORMATTER1); + dump_reg(sd, REG_OUTPUT_FORMATTER2); + dump_reg(sd, REG_OUTPUT_FORMATTER3); + dump_reg(sd, REG_OUTPUT_FORMATTER4); + dump_reg(sd, REG_OUTPUT_FORMATTER5); + dump_reg(sd, REG_OUTPUT_FORMATTER6); + dump_reg(sd, REG_CLEAR_LOST_LOCK); +} + +/** + * tvp514x_configure() - Configure the TVP5146/47 registers + * @sd: ptr to v4l2_subdev struct + * @decoder: ptr to tvp514x_decoder structure + * + * Returns zero if successful, or non-zero otherwise. + */ +static int tvp514x_configure(struct v4l2_subdev *sd, + struct tvp514x_decoder *decoder) +{ + int err; + + /* common register initialization */ + err = + tvp514x_write_regs(sd, decoder->tvp514x_regs); + if (err) + return err; + + if (debug) + tvp514x_reg_dump(sd); + + return 0; +} + +/** + * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision. + * @sd: pointer to standard V4L2 sub-device structure + * @decoder: pointer to tvp514x_decoder structure + * + * A device is considered to be detected if the chip ID (LSB and MSB) + * registers match the expected values. + * Any value of the rom version register is accepted. + * Returns ENODEV error number if no device is detected, or zero + * if a device is detected. + */ +static int tvp514x_detect(struct v4l2_subdev *sd, + struct tvp514x_decoder *decoder) +{ + u8 chip_id_msb, chip_id_lsb, rom_ver; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB); + chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB); + rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION); + + v4l2_dbg(1, debug, sd, + "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n", + chip_id_msb, chip_id_lsb, rom_ver); + if ((chip_id_msb != TVP514X_CHIP_ID_MSB) + || ((chip_id_lsb != TVP5146_CHIP_ID_LSB) + && (chip_id_lsb != TVP5147_CHIP_ID_LSB))) { + /* We didn't read the values we expected, so this must not be + * an TVP5146/47. + */ + v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n", + chip_id_msb, chip_id_lsb); + return -ENODEV; + } + + decoder->ver = rom_ver; + + v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n", + client->name, decoder->ver, + client->addr << 1, client->adapter->name); + return 0; +} + +/** + * tvp514x_querystd() - V4L2 decoder interface handler for querystd + * @sd: pointer to standard V4L2 sub-device structure + * @std_id: standard V4L2 std_id ioctl enum + * + * Returns the current standard detected by TVP5146/47. If no active input is + * detected then *std_id is set to 0 and the function returns 0. + */ +static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + enum tvp514x_std current_std; + enum tvp514x_input input_sel; + u8 sync_lock_status, lock_mask; + + if (std_id == NULL) + return -EINVAL; + + *std_id = V4L2_STD_UNKNOWN; + + /* To query the standard the TVP514x must power on the ADCs. */ + if (!decoder->streaming) { + tvp514x_s_stream(sd, 1); + msleep(LOCK_RETRY_DELAY); + } + + /* query the current standard */ + current_std = tvp514x_query_current_std(sd); + if (current_std == STD_INVALID) + return 0; + + input_sel = decoder->input; + + switch (input_sel) { + case INPUT_CVBS_VI1A: + case INPUT_CVBS_VI1B: + case INPUT_CVBS_VI1C: + case INPUT_CVBS_VI2A: + case INPUT_CVBS_VI2B: + case INPUT_CVBS_VI2C: + case INPUT_CVBS_VI3A: + case INPUT_CVBS_VI3B: + case INPUT_CVBS_VI3C: + case INPUT_CVBS_VI4A: + lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT | + STATUS_HORZ_SYNC_LOCK_BIT | + STATUS_VIRT_SYNC_LOCK_BIT; + break; + + case INPUT_SVIDEO_VI2A_VI1A: + case INPUT_SVIDEO_VI2B_VI1B: + case INPUT_SVIDEO_VI2C_VI1C: + case INPUT_SVIDEO_VI2A_VI3A: + case INPUT_SVIDEO_VI2B_VI3B: + case INPUT_SVIDEO_VI2C_VI3C: + case INPUT_SVIDEO_VI4A_VI1A: + case INPUT_SVIDEO_VI4A_VI1B: + case INPUT_SVIDEO_VI4A_VI1C: + case INPUT_SVIDEO_VI4A_VI3A: + case INPUT_SVIDEO_VI4A_VI3B: + case INPUT_SVIDEO_VI4A_VI3C: + lock_mask = STATUS_HORZ_SYNC_LOCK_BIT | + STATUS_VIRT_SYNC_LOCK_BIT; + break; + /*Need to add other interfaces*/ + default: + return -EINVAL; + } + /* check whether signal is locked */ + sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1); + if (lock_mask != (sync_lock_status & lock_mask)) + return 0; /* No input detected */ + + *std_id = decoder->std_list[current_std].standard.id; + + v4l2_dbg(1, debug, sd, "Current STD: %s\n", + decoder->std_list[current_std].standard.name); + return 0; +} + +/** + * tvp514x_s_std() - V4L2 decoder interface handler for s_std + * @sd: pointer to standard V4L2 sub-device structure + * @std_id: standard V4L2 v4l2_std_id ioctl enum + * + * If std_id is supported, sets the requested standard. Otherwise, returns + * -EINVAL + */ +static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + int err, i; + + for (i = 0; i < decoder->num_stds; i++) + if (std_id & decoder->std_list[i].standard.id) + break; + + if ((i == decoder->num_stds) || (i == STD_INVALID)) + return -EINVAL; + + err = tvp514x_write_reg(sd, REG_VIDEO_STD, + decoder->std_list[i].video_std); + if (err) + return err; + + decoder->current_std = i; + decoder->tvp514x_regs[REG_VIDEO_STD].val = + decoder->std_list[i].video_std; + + v4l2_dbg(1, debug, sd, "Standard set to: %s\n", + decoder->std_list[i].standard.name); + return 0; +} + +/** + * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing + * @sd: pointer to standard V4L2 sub-device structure + * @input: input selector for routing the signal + * @output: output selector for routing the signal + * @config: config value. Not used + * + * If index is valid, selects the requested input. Otherwise, returns -EINVAL if + * the input is not supported or there is no active signal present in the + * selected input. + */ +static int tvp514x_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + int err; + enum tvp514x_input input_sel; + enum tvp514x_output output_sel; + + if ((input >= INPUT_INVALID) || + (output >= OUTPUT_INVALID)) + /* Index out of bound */ + return -EINVAL; + + input_sel = input; + output_sel = output; + + err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel); + if (err) + return err; + + output_sel |= tvp514x_read_reg(sd, + REG_OUTPUT_FORMATTER1) & 0x7; + err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1, + output_sel); + if (err) + return err; + + decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel; + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel; + decoder->input = input; + decoder->output = output; + + v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel); + + return 0; +} + +/** + * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl + * @ctrl: pointer to v4l2_ctrl structure + * + * If the requested control is supported, sets the control's current + * value in HW. Otherwise, returns -EINVAL if the control is not supported. + */ +static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct tvp514x_decoder *decoder = to_decoder(sd); + int err = -EINVAL, value; + + value = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + err = tvp514x_write_reg(sd, REG_BRIGHTNESS, value); + if (!err) + decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; + break; + case V4L2_CID_CONTRAST: + err = tvp514x_write_reg(sd, REG_CONTRAST, value); + if (!err) + decoder->tvp514x_regs[REG_CONTRAST].val = value; + break; + case V4L2_CID_SATURATION: + err = tvp514x_write_reg(sd, REG_SATURATION, value); + if (!err) + decoder->tvp514x_regs[REG_SATURATION].val = value; + break; + case V4L2_CID_HUE: + if (value == 180) + value = 0x7F; + else if (value == -180) + value = 0x80; + err = tvp514x_write_reg(sd, REG_HUE, value); + if (!err) + decoder->tvp514x_regs[REG_HUE].val = value; + break; + case V4L2_CID_AUTOGAIN: + err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value ? 0x0f : 0x0c); + if (!err) + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; + break; + } + + v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n", + ctrl->id, ctrl->val); + return err; +} + +/** + * tvp514x_enum_mbus_fmt() - V4L2 decoder interface handler for enum_mbus_fmt + * @sd: pointer to standard V4L2 sub-device structure + * @index: index of pixelcode to retrieve + * @code: receives the pixelcode + * + * Enumerates supported mediabus formats + */ +static int +tvp514x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_YUYV10_2X10; + return 0; +} + +/** + * tvp514x_mbus_fmt() - V4L2 decoder interface handler for try/s/g_mbus_fmt + * @sd: pointer to standard V4L2 sub-device structure + * @f: pointer to the mediabus format structure + * + * Negotiates the image capture size and mediabus format. + */ +static int +tvp514x_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + enum tvp514x_std current_std; + + if (f == NULL) + return -EINVAL; + + /* Calculate height and width based on current standard */ + current_std = decoder->current_std; + + f->code = V4L2_MBUS_FMT_YUYV8_2X8; + f->width = decoder->std_list[current_std].width; + f->height = decoder->std_list[current_std].height; + f->field = V4L2_FIELD_INTERLACED; + f->colorspace = V4L2_COLORSPACE_SMPTE170M; + v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d\n", + f->width, f->height); + return 0; +} + +/** + * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm + * @sd: pointer to standard V4L2 sub-device structure + * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure + * + * Returns the decoder's video CAPTURE parameters. + */ +static int +tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + struct v4l2_captureparm *cparm; + enum tvp514x_std current_std; + + if (a == NULL) + return -EINVAL; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + /* only capture is supported */ + return -EINVAL; + + /* get the current standard */ + current_std = decoder->current_std; + + cparm = &a->parm.capture; + cparm->capability = V4L2_CAP_TIMEPERFRAME; + cparm->timeperframe = + decoder->std_list[current_std].standard.frameperiod; + + return 0; +} + +/** + * tvp514x_s_parm() - V4L2 decoder interface handler for s_parm + * @sd: pointer to standard V4L2 sub-device structure + * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure + * + * Configures the decoder to use the input parameters, if possible. If + * not possible, returns the appropriate error code. + */ +static int +tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + struct v4l2_fract *timeperframe; + enum tvp514x_std current_std; + + if (a == NULL) + return -EINVAL; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + /* only capture is supported */ + return -EINVAL; + + timeperframe = &a->parm.capture.timeperframe; + + /* get the current standard */ + current_std = decoder->current_std; + + *timeperframe = + decoder->std_list[current_std].standard.frameperiod; + + return 0; +} + +/** + * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream + * @sd: pointer to standard V4L2 sub-device structure + * @enable: streaming enable or disable + * + * Sets streaming to enable or disable, if possible. + */ +static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable) +{ + int err = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tvp514x_decoder *decoder = to_decoder(sd); + + if (decoder->streaming == enable) + return 0; + + switch (enable) { + case 0: + { + /* Power Down Sequence */ + err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01); + if (err) { + v4l2_err(sd, "Unable to turn off decoder\n"); + return err; + } + decoder->streaming = enable; + break; + } + case 1: + { + struct tvp514x_reg *int_seq = (struct tvp514x_reg *) + client->driver->id_table->driver_data; + + /* Power Up Sequence */ + err = tvp514x_write_regs(sd, int_seq); + if (err) { + v4l2_err(sd, "Unable to turn on decoder\n"); + return err; + } + /* Detect if not already detected */ + err = tvp514x_detect(sd, decoder); + if (err) { + v4l2_err(sd, "Unable to detect decoder\n"); + return err; + } + err = tvp514x_configure(sd, decoder); + if (err) { + v4l2_err(sd, "Unable to configure decoder\n"); + return err; + } + decoder->streaming = enable; + break; + } + default: + err = -ENODEV; + break; + } + + return err; +} + +static const struct v4l2_ctrl_ops tvp514x_ctrl_ops = { + .s_ctrl = tvp514x_s_ctrl, +}; + +/** + * tvp514x_enum_mbus_code() - V4L2 decoder interface handler for enum_mbus_code + * @sd: pointer to standard V4L2 sub-device structure + * @fh: file handle + * @code: pointer to v4l2_subdev_mbus_code_enum structure + * + * Enumertaes mbus codes supported + */ +static int tvp514x_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + u32 pad = code->pad; + u32 index = code->index; + + memset(code, 0, sizeof(*code)); + code->index = index; + code->pad = pad; + + if (index != 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_YUYV8_2X8; + + return 0; +} + +/** + * tvp514x_get_pad_format() - V4L2 decoder interface handler for get pad format + * @sd: pointer to standard V4L2 sub-device structure + * @fh: file handle + * @format: pointer to v4l2_subdev_format structure + * + * Retrieves pad format which is active or tried based on requirement + */ +static int tvp514x_get_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + __u32 which = format->which; + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { + format->format = decoder->format; + return 0; + } + + format->format.code = V4L2_MBUS_FMT_YUYV8_2X8; + format->format.width = tvp514x_std_list[decoder->current_std].width; + format->format.height = tvp514x_std_list[decoder->current_std].height; + format->format.colorspace = V4L2_COLORSPACE_SMPTE170M; + format->format.field = V4L2_FIELD_INTERLACED; + + return 0; +} + +/** + * tvp514x_set_pad_format() - V4L2 decoder interface handler for set pad format + * @sd: pointer to standard V4L2 sub-device structure + * @fh: file handle + * @format: pointer to v4l2_subdev_format structure + * + * Set pad format for the output pad + */ +static int tvp514x_set_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + + if (fmt->format.field != V4L2_FIELD_INTERLACED || + fmt->format.code != V4L2_MBUS_FMT_YUYV8_2X8 || + fmt->format.colorspace != V4L2_COLORSPACE_SMPTE170M || + fmt->format.width != tvp514x_std_list[decoder->current_std].width || + fmt->format.height != tvp514x_std_list[decoder->current_std].height) + return -EINVAL; + + decoder->format = fmt->format; + + return 0; +} + +static const struct v4l2_subdev_core_ops tvp514x_core_ops = { + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = tvp514x_s_std, +}; + +static const struct v4l2_subdev_video_ops tvp514x_video_ops = { + .s_routing = tvp514x_s_routing, + .querystd = tvp514x_querystd, + .enum_mbus_fmt = tvp514x_enum_mbus_fmt, + .g_mbus_fmt = tvp514x_mbus_fmt, + .try_mbus_fmt = tvp514x_mbus_fmt, + .s_mbus_fmt = tvp514x_mbus_fmt, + .g_parm = tvp514x_g_parm, + .s_parm = tvp514x_s_parm, + .s_stream = tvp514x_s_stream, +}; + +static const struct v4l2_subdev_pad_ops tvp514x_pad_ops = { + .enum_mbus_code = tvp514x_enum_mbus_code, + .get_fmt = tvp514x_get_pad_format, + .set_fmt = tvp514x_set_pad_format, +}; + +static const struct v4l2_subdev_ops tvp514x_ops = { + .core = &tvp514x_core_ops, + .video = &tvp514x_video_ops, + .pad = &tvp514x_pad_ops, +}; + +static struct tvp514x_decoder tvp514x_dev = { + .streaming = 0, + .fmt_list = tvp514x_fmt_list, + .num_fmts = ARRAY_SIZE(tvp514x_fmt_list), + .pix = { + /* Default to NTSC 8-bit YUV 422 */ + .width = NTSC_NUM_ACTIVE_PIXELS, + .height = NTSC_NUM_ACTIVE_LINES, + .pixelformat = V4L2_PIX_FMT_UYVY, + .field = V4L2_FIELD_INTERLACED, + .bytesperline = NTSC_NUM_ACTIVE_PIXELS * 2, + .sizeimage = NTSC_NUM_ACTIVE_PIXELS * 2 * + NTSC_NUM_ACTIVE_LINES, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + }, + .current_std = STD_NTSC_MJ, + .std_list = tvp514x_std_list, + .num_stds = ARRAY_SIZE(tvp514x_std_list), + +}; + +/** + * tvp514x_probe() - decoder driver i2c probe handler + * @client: i2c driver client device structure + * @id: i2c driver id table + * + * Register decoder as an i2c client device and V4L2 + * device. + */ +static int +tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct tvp514x_decoder *decoder; + struct v4l2_subdev *sd; + int ret; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + if (!client->dev.platform_data) { + v4l2_err(client, "No platform data!!\n"); + return -ENODEV; + } + + decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + + /* Initialize the tvp514x_decoder with default configuration */ + *decoder = tvp514x_dev; + /* Copy default register configuration */ + memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, + sizeof(tvp514x_reg_list_default)); + + /* Copy board specific information here */ + decoder->pdata = client->dev.platform_data; + + /** + * Fetch platform specific data, and configure the + * tvp514x_reg_list[] accordingly. Since this is one + * time configuration, no need to preserve. + */ + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |= + (decoder->pdata->clk_polarity << 1); + decoder->tvp514x_regs[REG_SYNC_CONTROL].val |= + ((decoder->pdata->hs_polarity << 2) | + (decoder->pdata->vs_polarity << 3)); + /* Set default standard to auto */ + decoder->tvp514x_regs[REG_VIDEO_STD].val = + VIDEO_STD_AUTO_SWITCH_BIT; + + /* Register with V4L2 layer as slave device */ + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &tvp514x_ops); + strlcpy(sd->name, TVP514X_MODULE_NAME, sizeof(sd->name)); + +#if defined(CONFIG_MEDIA_CONTROLLER) + decoder->pad.flags = MEDIA_PAD_FL_SOURCE; + decoder->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + decoder->sd.entity.flags |= MEDIA_ENT_T_V4L2_SUBDEV_DECODER; + + ret = media_entity_init(&decoder->sd.entity, 1, &decoder->pad, 0); + if (ret < 0) { + v4l2_err(sd, "%s decoder driver failed to register !!\n", + sd->name); + kfree(decoder); + return ret; + } +#endif + v4l2_ctrl_handler_init(&decoder->hdl, 5); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_HUE, -180, 180, 180, 0); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + ret = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + return ret; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + + v4l2_info(sd, "%s decoder driver registered !!\n", sd->name); + + return 0; + +} + +/** + * tvp514x_remove() - decoder driver i2c remove handler + * @client: i2c driver client device structure + * + * Unregister decoder as an i2c client device and V4L2 + * device. Complement of tvp514x_probe(). + */ +static int tvp514x_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tvp514x_decoder *decoder = to_decoder(sd); + + v4l2_device_unregister_subdev(sd); +#if defined(CONFIG_MEDIA_CONTROLLER) + media_entity_cleanup(&decoder->sd.entity); +#endif + v4l2_ctrl_handler_free(&decoder->hdl); + return 0; +} +/* TVP5146 Init/Power on Sequence */ +static const struct tvp514x_reg tvp5146_init_reg_seq[] = { + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00}, + {TOK_WRITE, REG_OPERATION_MODE, 0x01}, + {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, +}; + +/* TVP5147 Init/Power on Sequence */ +static const struct tvp514x_reg tvp5147_init_reg_seq[] = { + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x16}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xA0}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x16}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00}, + {TOK_WRITE, REG_OPERATION_MODE, 0x01}, + {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, +}; + +/* TVP5146M2/TVP5147M1 Init/Power on Sequence */ +static const struct tvp514x_reg tvp514xm_init_reg_seq[] = { + {TOK_WRITE, REG_OPERATION_MODE, 0x01}, + {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, +}; + +/** + * I2C Device Table - + * + * name - Name of the actual device/chip. + * driver_data - Driver data + */ +static const struct i2c_device_id tvp514x_id[] = { + {"tvp5146", (unsigned long)tvp5146_init_reg_seq}, + {"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq}, + {"tvp5147", (unsigned long)tvp5147_init_reg_seq}, + {"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, tvp514x_id); + +static struct i2c_driver tvp514x_driver = { + .driver = { + .owner = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + }, + .probe = tvp514x_probe, + .remove = tvp514x_remove, + .id_table = tvp514x_id, +}; + +module_i2c_driver(tvp514x_driver); diff --git a/drivers/media/i2c/tvp514x_regs.h b/drivers/media/i2c/tvp514x_regs.h new file mode 100644 index 00000000..d23aa2fb --- /dev/null +++ b/drivers/media/i2c/tvp514x_regs.h @@ -0,0 +1,287 @@ +/* + * drivers/media/i2c/tvp514x_regs.h + * + * Copyright (C) 2008 Texas Instruments Inc + * Author: Vaibhav Hiremath + * + * Contributors: + * Sivaraj R + * Brijesh R Jadav + * Hardik Shah + * Manjunath Hadli + * Karicheri Muralidharan + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _TVP514X_REGS_H +#define _TVP514X_REGS_H + +/* + * TVP5146/47 registers + */ +#define REG_INPUT_SEL (0x00) +#define REG_AFE_GAIN_CTRL (0x01) +#define REG_VIDEO_STD (0x02) +#define REG_OPERATION_MODE (0x03) +#define REG_AUTOSWITCH_MASK (0x04) + +#define REG_COLOR_KILLER (0x05) +#define REG_LUMA_CONTROL1 (0x06) +#define REG_LUMA_CONTROL2 (0x07) +#define REG_LUMA_CONTROL3 (0x08) + +#define REG_BRIGHTNESS (0x09) +#define REG_CONTRAST (0x0A) +#define REG_SATURATION (0x0B) +#define REG_HUE (0x0C) + +#define REG_CHROMA_CONTROL1 (0x0D) +#define REG_CHROMA_CONTROL2 (0x0E) + +/* 0x0F Reserved */ + +#define REG_COMP_PR_SATURATION (0x10) +#define REG_COMP_Y_CONTRAST (0x11) +#define REG_COMP_PB_SATURATION (0x12) + +/* 0x13 Reserved */ + +#define REG_COMP_Y_BRIGHTNESS (0x14) + +/* 0x15 Reserved */ + +#define REG_AVID_START_PIXEL_LSB (0x16) +#define REG_AVID_START_PIXEL_MSB (0x17) +#define REG_AVID_STOP_PIXEL_LSB (0x18) +#define REG_AVID_STOP_PIXEL_MSB (0x19) + +#define REG_HSYNC_START_PIXEL_LSB (0x1A) +#define REG_HSYNC_START_PIXEL_MSB (0x1B) +#define REG_HSYNC_STOP_PIXEL_LSB (0x1C) +#define REG_HSYNC_STOP_PIXEL_MSB (0x1D) + +#define REG_VSYNC_START_LINE_LSB (0x1E) +#define REG_VSYNC_START_LINE_MSB (0x1F) +#define REG_VSYNC_STOP_LINE_LSB (0x20) +#define REG_VSYNC_STOP_LINE_MSB (0x21) + +#define REG_VBLK_START_LINE_LSB (0x22) +#define REG_VBLK_START_LINE_MSB (0x23) +#define REG_VBLK_STOP_LINE_LSB (0x24) +#define REG_VBLK_STOP_LINE_MSB (0x25) + +/* 0x26 - 0x27 Reserved */ + +#define REG_FAST_SWTICH_CONTROL (0x28) + +/* 0x29 Reserved */ + +#define REG_FAST_SWTICH_SCART_DELAY (0x2A) + +/* 0x2B Reserved */ + +#define REG_SCART_DELAY (0x2C) +#define REG_CTI_DELAY (0x2D) +#define REG_CTI_CONTROL (0x2E) + +/* 0x2F - 0x31 Reserved */ + +#define REG_SYNC_CONTROL (0x32) +#define REG_OUTPUT_FORMATTER1 (0x33) +#define REG_OUTPUT_FORMATTER2 (0x34) +#define REG_OUTPUT_FORMATTER3 (0x35) +#define REG_OUTPUT_FORMATTER4 (0x36) +#define REG_OUTPUT_FORMATTER5 (0x37) +#define REG_OUTPUT_FORMATTER6 (0x38) +#define REG_CLEAR_LOST_LOCK (0x39) + +#define REG_STATUS1 (0x3A) +#define REG_STATUS2 (0x3B) + +#define REG_AGC_GAIN_STATUS_LSB (0x3C) +#define REG_AGC_GAIN_STATUS_MSB (0x3D) + +/* 0x3E Reserved */ + +#define REG_VIDEO_STD_STATUS (0x3F) +#define REG_GPIO_INPUT1 (0x40) +#define REG_GPIO_INPUT2 (0x41) + +/* 0x42 - 0x45 Reserved */ + +#define REG_AFE_COARSE_GAIN_CH1 (0x46) +#define REG_AFE_COARSE_GAIN_CH2 (0x47) +#define REG_AFE_COARSE_GAIN_CH3 (0x48) +#define REG_AFE_COARSE_GAIN_CH4 (0x49) + +#define REG_AFE_FINE_GAIN_PB_B_LSB (0x4A) +#define REG_AFE_FINE_GAIN_PB_B_MSB (0x4B) +#define REG_AFE_FINE_GAIN_Y_G_CHROMA_LSB (0x4C) +#define REG_AFE_FINE_GAIN_Y_G_CHROMA_MSB (0x4D) +#define REG_AFE_FINE_GAIN_PR_R_LSB (0x4E) +#define REG_AFE_FINE_GAIN_PR_R_MSB (0x4F) +#define REG_AFE_FINE_GAIN_CVBS_LUMA_LSB (0x50) +#define REG_AFE_FINE_GAIN_CVBS_LUMA_MSB (0x51) + +/* 0x52 - 0x68 Reserved */ + +#define REG_FBIT_VBIT_CONTROL1 (0x69) + +/* 0x6A - 0x6B Reserved */ + +#define REG_BACKEND_AGC_CONTROL (0x6C) + +/* 0x6D - 0x6E Reserved */ + +#define REG_AGC_DECREMENT_SPEED_CONTROL (0x6F) +#define REG_ROM_VERSION (0x70) + +/* 0x71 - 0x73 Reserved */ + +#define REG_AGC_WHITE_PEAK_PROCESSING (0x74) +#define REG_FBIT_VBIT_CONTROL2 (0x75) +#define REG_VCR_TRICK_MODE_CONTROL (0x76) +#define REG_HORIZONTAL_SHAKE_INCREMENT (0x77) +#define REG_AGC_INCREMENT_SPEED (0x78) +#define REG_AGC_INCREMENT_DELAY (0x79) + +/* 0x7A - 0x7F Reserved */ + +#define REG_CHIP_ID_MSB (0x80) +#define REG_CHIP_ID_LSB (0x81) + +/* 0x82 Reserved */ + +#define REG_CPLL_SPEED_CONTROL (0x83) + +/* 0x84 - 0x96 Reserved */ + +#define REG_STATUS_REQUEST (0x97) + +/* 0x98 - 0x99 Reserved */ + +#define REG_VERTICAL_LINE_COUNT_LSB (0x9A) +#define REG_VERTICAL_LINE_COUNT_MSB (0x9B) + +/* 0x9C - 0x9D Reserved */ + +#define REG_AGC_DECREMENT_DELAY (0x9E) + +/* 0x9F - 0xB0 Reserved */ + +#define REG_VDP_TTX_FILTER_1_MASK1 (0xB1) +#define REG_VDP_TTX_FILTER_1_MASK2 (0xB2) +#define REG_VDP_TTX_FILTER_1_MASK3 (0xB3) +#define REG_VDP_TTX_FILTER_1_MASK4 (0xB4) +#define REG_VDP_TTX_FILTER_1_MASK5 (0xB5) +#define REG_VDP_TTX_FILTER_2_MASK1 (0xB6) +#define REG_VDP_TTX_FILTER_2_MASK2 (0xB7) +#define REG_VDP_TTX_FILTER_2_MASK3 (0xB8) +#define REG_VDP_TTX_FILTER_2_MASK4 (0xB9) +#define REG_VDP_TTX_FILTER_2_MASK5 (0xBA) +#define REG_VDP_TTX_FILTER_CONTROL (0xBB) +#define REG_VDP_FIFO_WORD_COUNT (0xBC) +#define REG_VDP_FIFO_INTERRUPT_THRLD (0xBD) + +/* 0xBE Reserved */ + +#define REG_VDP_FIFO_RESET (0xBF) +#define REG_VDP_FIFO_OUTPUT_CONTROL (0xC0) +#define REG_VDP_LINE_NUMBER_INTERRUPT (0xC1) +#define REG_VDP_PIXEL_ALIGNMENT_LSB (0xC2) +#define REG_VDP_PIXEL_ALIGNMENT_MSB (0xC3) + +/* 0xC4 - 0xD5 Reserved */ + +#define REG_VDP_LINE_START (0xD6) +#define REG_VDP_LINE_STOP (0xD7) +#define REG_VDP_GLOBAL_LINE_MODE (0xD8) +#define REG_VDP_FULL_FIELD_ENABLE (0xD9) +#define REG_VDP_FULL_FIELD_MODE (0xDA) + +/* 0xDB - 0xDF Reserved */ + +#define REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR (0xE0) +#define REG_VBUS_DATA_ACCESS_VBUS_ADDR_INCR (0xE1) +#define REG_FIFO_READ_DATA (0xE2) + +/* 0xE3 - 0xE7 Reserved */ + +#define REG_VBUS_ADDRESS_ACCESS1 (0xE8) +#define REG_VBUS_ADDRESS_ACCESS2 (0xE9) +#define REG_VBUS_ADDRESS_ACCESS3 (0xEA) + +/* 0xEB - 0xEF Reserved */ + +#define REG_INTERRUPT_RAW_STATUS0 (0xF0) +#define REG_INTERRUPT_RAW_STATUS1 (0xF1) +#define REG_INTERRUPT_STATUS0 (0xF2) +#define REG_INTERRUPT_STATUS1 (0xF3) +#define REG_INTERRUPT_MASK0 (0xF4) +#define REG_INTERRUPT_MASK1 (0xF5) +#define REG_INTERRUPT_CLEAR0 (0xF6) +#define REG_INTERRUPT_CLEAR1 (0xF7) + +/* 0xF8 - 0xFF Reserved */ + +/* + * Mask and bit definitions of TVP5146/47 registers + */ +/* The ID values we are looking for */ +#define TVP514X_CHIP_ID_MSB (0x51) +#define TVP5146_CHIP_ID_LSB (0x46) +#define TVP5147_CHIP_ID_LSB (0x47) + +#define VIDEO_STD_MASK (0x07) +#define VIDEO_STD_AUTO_SWITCH_BIT (0x00) +#define VIDEO_STD_NTSC_MJ_BIT (0x01) +#define VIDEO_STD_PAL_BDGHIN_BIT (0x02) +#define VIDEO_STD_PAL_M_BIT (0x03) +#define VIDEO_STD_PAL_COMBINATION_N_BIT (0x04) +#define VIDEO_STD_NTSC_4_43_BIT (0x05) +#define VIDEO_STD_SECAM_BIT (0x06) +#define VIDEO_STD_PAL_60_BIT (0x07) + +/* + * Status bit + */ +#define STATUS_TV_VCR_BIT (1<<0) +#define STATUS_HORZ_SYNC_LOCK_BIT (1<<1) +#define STATUS_VIRT_SYNC_LOCK_BIT (1<<2) +#define STATUS_CLR_SUBCAR_LOCK_BIT (1<<3) +#define STATUS_LOST_LOCK_DETECT_BIT (1<<4) +#define STATUS_FEILD_RATE_BIT (1<<5) +#define STATUS_LINE_ALTERNATING_BIT (1<<6) +#define STATUS_PEAK_WHITE_DETECT_BIT (1<<7) + +/* Tokens for register write */ +#define TOK_WRITE (0) /* token for write operation */ +#define TOK_TERM (1) /* terminating token */ +#define TOK_DELAY (2) /* delay token for reg list */ +#define TOK_SKIP (3) /* token to skip a register */ +/** + * struct tvp514x_reg - Structure for TVP5146/47 register initialization values + * @token - Token: TOK_WRITE, TOK_TERM etc.. + * @reg - Register offset + * @val - Register Value for TOK_WRITE or delay in ms for TOK_DELAY + */ +struct tvp514x_reg { + u8 token; + u8 reg; + u32 val; +}; + +#endif /* ifndef _TVP514X_REGS_H */ diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c new file mode 100644 index 00000000..485159a3 --- /dev/null +++ b/drivers/media/i2c/tvp5150.c @@ -0,0 +1,1267 @@ +/* + * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver + * + * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tvp5150_reg.h" + +#define TVP5150_H_MAX 720 +#define TVP5150_V_MAX_525_60 480 +#define TVP5150_V_MAX_OTHERS 576 +#define TVP5150_MAX_CROP_LEFT 511 +#define TVP5150_MAX_CROP_TOP 127 +#define TVP5150_CROP_SHIFT 2 + +MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +struct tvp5150 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_rect rect; + + v4l2_std_id norm; /* Current set standard */ + u32 input; + u32 output; + int enable; +}; + +static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tvp5150, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp5150, hdl)->sd; +} + +static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[1]; + int rc; + + buffer[0] = addr; + + rc = i2c_master_send(c, buffer, 1); + if (rc < 0) { + v4l2_err(sd, "i2c i/o error: rc == %d (should be 1)\n", rc); + return rc; + } + + msleep(10); + + rc = i2c_master_recv(c, buffer, 1); + if (rc < 0) { + v4l2_err(sd, "i2c i/o error: rc == %d (should be 1)\n", rc); + return rc; + } + + v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]); + + return (buffer[0]); +} + +static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr, + unsigned char value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[2]; + int rc; + + buffer[0] = addr; + buffer[1] = value; + v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]); + if (2 != (rc = i2c_master_send(c, buffer, 2))) + v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc); +} + +static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init, + const u8 end, int max_line) +{ + int i = 0; + + while (init != (u8)(end + 1)) { + if ((i % max_line) == 0) { + if (i > 0) + printk("\n"); + printk("tvp5150: %s reg 0x%02x = ", s, init); + } + printk("%02x ", tvp5150_read(sd, init)); + + init++; + i++; + } + printk("\n"); +} + +static int tvp5150_log_status(struct v4l2_subdev *sd) +{ + printk("tvp5150: Video input source selection #1 = 0x%02x\n", + tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1)); + printk("tvp5150: Analog channel controls = 0x%02x\n", + tvp5150_read(sd, TVP5150_ANAL_CHL_CTL)); + printk("tvp5150: Operation mode controls = 0x%02x\n", + tvp5150_read(sd, TVP5150_OP_MODE_CTL)); + printk("tvp5150: Miscellaneous controls = 0x%02x\n", + tvp5150_read(sd, TVP5150_MISC_CTL)); + printk("tvp5150: Autoswitch mask= 0x%02x\n", + tvp5150_read(sd, TVP5150_AUTOSW_MSK)); + printk("tvp5150: Color killer threshold control = 0x%02x\n", + tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL)); + printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n", + tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1), + tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2), + tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3)); + printk("tvp5150: Brightness control = 0x%02x\n", + tvp5150_read(sd, TVP5150_BRIGHT_CTL)); + printk("tvp5150: Color saturation control = 0x%02x\n", + tvp5150_read(sd, TVP5150_SATURATION_CTL)); + printk("tvp5150: Hue control = 0x%02x\n", + tvp5150_read(sd, TVP5150_HUE_CTL)); + printk("tvp5150: Contrast control = 0x%02x\n", + tvp5150_read(sd, TVP5150_CONTRAST_CTL)); + printk("tvp5150: Outputs and data rates select = 0x%02x\n", + tvp5150_read(sd, TVP5150_DATA_RATE_SEL)); + printk("tvp5150: Configuration shared pins = 0x%02x\n", + tvp5150_read(sd, TVP5150_CONF_SHARED_PIN)); + printk("tvp5150: Active video cropping start = 0x%02x%02x\n", + tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB), + tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB)); + printk("tvp5150: Active video cropping stop = 0x%02x%02x\n", + tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB), + tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB)); + printk("tvp5150: Genlock/RTC = 0x%02x\n", + tvp5150_read(sd, TVP5150_GENLOCK)); + printk("tvp5150: Horizontal sync start = 0x%02x\n", + tvp5150_read(sd, TVP5150_HORIZ_SYNC_START)); + printk("tvp5150: Vertical blanking start = 0x%02x\n", + tvp5150_read(sd, TVP5150_VERT_BLANKING_START)); + printk("tvp5150: Vertical blanking stop = 0x%02x\n", + tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP)); + printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n", + tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1), + tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2)); + printk("tvp5150: Interrupt reset register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_RESET_REG_B)); + printk("tvp5150: Interrupt enable register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B)); + printk("tvp5150: Interrupt configuration register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B)); + printk("tvp5150: Video standard = 0x%02x\n", + tvp5150_read(sd, TVP5150_VIDEO_STD)); + printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n", + tvp5150_read(sd, TVP5150_CB_GAIN_FACT), + tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR)); + printk("tvp5150: Macrovision on counter = 0x%02x\n", + tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR)); + printk("tvp5150: Macrovision off counter = 0x%02x\n", + tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR)); + printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n", + (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4); + printk("tvp5150: Device ID = %02x%02x\n", + tvp5150_read(sd, TVP5150_MSB_DEV_ID), + tvp5150_read(sd, TVP5150_LSB_DEV_ID)); + printk("tvp5150: ROM version = (hex) %02x.%02x\n", + tvp5150_read(sd, TVP5150_ROM_MAJOR_VER), + tvp5150_read(sd, TVP5150_ROM_MINOR_VER)); + printk("tvp5150: Vertical line count = 0x%02x%02x\n", + tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB), + tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB)); + printk("tvp5150: Interrupt status register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_STATUS_REG_B)); + printk("tvp5150: Interrupt active register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B)); + printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n", + tvp5150_read(sd, TVP5150_STATUS_REG_1), + tvp5150_read(sd, TVP5150_STATUS_REG_2), + tvp5150_read(sd, TVP5150_STATUS_REG_3), + tvp5150_read(sd, TVP5150_STATUS_REG_4), + tvp5150_read(sd, TVP5150_STATUS_REG_5)); + + dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI, + TVP5150_TELETEXT_FIL1_END, 8); + dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI, + TVP5150_TELETEXT_FIL2_END, 8); + + printk("tvp5150: Teletext filter enable = 0x%02x\n", + tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA)); + printk("tvp5150: Interrupt status register A = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_STATUS_REG_A)); + printk("tvp5150: Interrupt enable register A = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A)); + printk("tvp5150: Interrupt configuration = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_CONF)); + printk("tvp5150: VDP status register = 0x%02x\n", + tvp5150_read(sd, TVP5150_VDP_STATUS_REG)); + printk("tvp5150: FIFO word count = 0x%02x\n", + tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT)); + printk("tvp5150: FIFO interrupt threshold = 0x%02x\n", + tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD)); + printk("tvp5150: FIFO reset = 0x%02x\n", + tvp5150_read(sd, TVP5150_FIFO_RESET)); + printk("tvp5150: Line number interrupt = 0x%02x\n", + tvp5150_read(sd, TVP5150_LINE_NUMBER_INT)); + printk("tvp5150: Pixel alignment register = 0x%02x%02x\n", + tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH), + tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW)); + printk("tvp5150: FIFO output control = 0x%02x\n", + tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL)); + printk("tvp5150: Full field enable = 0x%02x\n", + tvp5150_read(sd, TVP5150_FULL_FIELD_ENA)); + printk("tvp5150: Full field mode register = 0x%02x\n", + tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG)); + + dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI, + TVP5150_CC_DATA_END, 8); + + dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI, + TVP5150_WSS_DATA_END, 8); + + dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI, + TVP5150_VPS_DATA_END, 8); + + dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI, + TVP5150_VITC_DATA_END, 10); + + dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI, + TVP5150_LINE_MODE_END, 8); + return 0; +} + +/**************************************************************************** + Basic functions + ****************************************************************************/ + +static inline void tvp5150_selmux(struct v4l2_subdev *sd) +{ + int opmode = 0; + struct tvp5150 *decoder = to_tvp5150(sd); + int input = 0; + int val; + + if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable) + input = 8; + + switch (decoder->input) { + case TVP5150_COMPOSITE1: + input |= 2; + /* fall through */ + case TVP5150_COMPOSITE0: + break; + case TVP5150_SVIDEO: + default: + input |= 1; + break; + } + + v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i " + "=> tvp5150 input=%i, opmode=%i\n", + decoder->input, decoder->output, + input, opmode); + + tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode); + tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input); + + /* Svideo should enable YCrCb output and disable GPCL output + * For Composite and TV, it should be the reverse + */ + val = tvp5150_read(sd, TVP5150_MISC_CTL); + if (val < 0) { + v4l2_err(sd, "%s: failed with error = %d\n", __func__, val); + return; + } + + if (decoder->input == TVP5150_SVIDEO) + val = (val & ~0x40) | 0x10; + else + val = (val & ~0x10) | 0x40; + tvp5150_write(sd, TVP5150_MISC_CTL, val); +}; + +struct i2c_reg_value { + unsigned char reg; + unsigned char value; +}; + +/* Default values as sugested at TVP5150AM1 datasheet */ +static const struct i2c_reg_value tvp5150_init_default[] = { + { /* 0x00 */ + TVP5150_VD_IN_SRC_SEL_1,0x00 + }, + { /* 0x01 */ + TVP5150_ANAL_CHL_CTL,0x15 + }, + { /* 0x02 */ + TVP5150_OP_MODE_CTL,0x00 + }, + { /* 0x03 */ + TVP5150_MISC_CTL,0x01 + }, + { /* 0x06 */ + TVP5150_COLOR_KIL_THSH_CTL,0x10 + }, + { /* 0x07 */ + TVP5150_LUMA_PROC_CTL_1,0x60 + }, + { /* 0x08 */ + TVP5150_LUMA_PROC_CTL_2,0x00 + }, + { /* 0x09 */ + TVP5150_BRIGHT_CTL,0x80 + }, + { /* 0x0a */ + TVP5150_SATURATION_CTL,0x80 + }, + { /* 0x0b */ + TVP5150_HUE_CTL,0x00 + }, + { /* 0x0c */ + TVP5150_CONTRAST_CTL,0x80 + }, + { /* 0x0d */ + TVP5150_DATA_RATE_SEL,0x47 + }, + { /* 0x0e */ + TVP5150_LUMA_PROC_CTL_3,0x00 + }, + { /* 0x0f */ + TVP5150_CONF_SHARED_PIN,0x08 + }, + { /* 0x11 */ + TVP5150_ACT_VD_CROP_ST_MSB,0x00 + }, + { /* 0x12 */ + TVP5150_ACT_VD_CROP_ST_LSB,0x00 + }, + { /* 0x13 */ + TVP5150_ACT_VD_CROP_STP_MSB,0x00 + }, + { /* 0x14 */ + TVP5150_ACT_VD_CROP_STP_LSB,0x00 + }, + { /* 0x15 */ + TVP5150_GENLOCK,0x01 + }, + { /* 0x16 */ + TVP5150_HORIZ_SYNC_START,0x80 + }, + { /* 0x18 */ + TVP5150_VERT_BLANKING_START,0x00 + }, + { /* 0x19 */ + TVP5150_VERT_BLANKING_STOP,0x00 + }, + { /* 0x1a */ + TVP5150_CHROMA_PROC_CTL_1,0x0c + }, + { /* 0x1b */ + TVP5150_CHROMA_PROC_CTL_2,0x14 + }, + { /* 0x1c */ + TVP5150_INT_RESET_REG_B,0x00 + }, + { /* 0x1d */ + TVP5150_INT_ENABLE_REG_B,0x00 + }, + { /* 0x1e */ + TVP5150_INTT_CONFIG_REG_B,0x00 + }, + { /* 0x28 */ + TVP5150_VIDEO_STD,0x00 + }, + { /* 0x2e */ + TVP5150_MACROVISION_ON_CTR,0x0f + }, + { /* 0x2f */ + TVP5150_MACROVISION_OFF_CTR,0x01 + }, + { /* 0xbb */ + TVP5150_TELETEXT_FIL_ENA,0x00 + }, + { /* 0xc0 */ + TVP5150_INT_STATUS_REG_A,0x00 + }, + { /* 0xc1 */ + TVP5150_INT_ENABLE_REG_A,0x00 + }, + { /* 0xc2 */ + TVP5150_INT_CONF,0x04 + }, + { /* 0xc8 */ + TVP5150_FIFO_INT_THRESHOLD,0x80 + }, + { /* 0xc9 */ + TVP5150_FIFO_RESET,0x00 + }, + { /* 0xca */ + TVP5150_LINE_NUMBER_INT,0x00 + }, + { /* 0xcb */ + TVP5150_PIX_ALIGN_REG_LOW,0x4e + }, + { /* 0xcc */ + TVP5150_PIX_ALIGN_REG_HIGH,0x00 + }, + { /* 0xcd */ + TVP5150_FIFO_OUT_CTRL,0x01 + }, + { /* 0xcf */ + TVP5150_FULL_FIELD_ENA,0x00 + }, + { /* 0xd0 */ + TVP5150_LINE_MODE_INI,0x00 + }, + { /* 0xfc */ + TVP5150_FULL_FIELD_MODE_REG,0x7f + }, + { /* end of data */ + 0xff,0xff + } +}; + +/* Default values as sugested at TVP5150AM1 datasheet */ +static const struct i2c_reg_value tvp5150_init_enable[] = { + { + TVP5150_CONF_SHARED_PIN, 2 + },{ /* Automatic offset and AGC enabled */ + TVP5150_ANAL_CHL_CTL, 0x15 + },{ /* Activate YCrCb output 0x9 or 0xd ? */ + TVP5150_MISC_CTL, 0x6f + },{ /* Activates video std autodetection for all standards */ + TVP5150_AUTOSW_MSK, 0x0 + },{ /* Default format: 0x47. For 4:2:2: 0x40 */ + TVP5150_DATA_RATE_SEL, 0x47 + },{ + TVP5150_CHROMA_PROC_CTL_1, 0x0c + },{ + TVP5150_CHROMA_PROC_CTL_2, 0x54 + },{ /* Non documented, but initialized on WinTV USB2 */ + 0x27, 0x20 + },{ + 0xff,0xff + } +}; + +struct tvp5150_vbi_type { + unsigned int vbi_type; + unsigned int ini_line; + unsigned int end_line; + unsigned int by_field :1; +}; + +struct i2c_vbi_ram_value { + u16 reg; + struct tvp5150_vbi_type type; + unsigned char values[16]; +}; + +/* This struct have the values for each supported VBI Standard + * by + tvp5150_vbi_types should follow the same order as vbi_ram_default + * value 0 means rom position 0x10, value 1 means rom position 0x30 + * and so on. There are 16 possible locations from 0 to 15. + */ + +static struct i2c_vbi_ram_value vbi_ram_default[] = +{ + /* FIXME: Current api doesn't handle all VBI types, those not + yet supported are placed under #if 0 */ +#if 0 + {0x010, /* Teletext, SECAM, WST System A */ + {V4L2_SLICED_TELETEXT_SECAM,6,23,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26, + 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, +#endif + {0x030, /* Teletext, PAL, WST System B */ + {V4L2_SLICED_TELETEXT_B,6,22,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b, + 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, +#if 0 + {0x050, /* Teletext, PAL, WST System C */ + {V4L2_SLICED_TELETEXT_PAL_C,6,22,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, + 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, + {0x070, /* Teletext, NTSC, WST System B */ + {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, + {0x090, /* Tetetext, NTSC NABTS System C */ + {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 } + }, + {0x0b0, /* Teletext, NTSC-J, NABTS System D */ + {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, + {0x0d0, /* Closed Caption, PAL/SECAM */ + {V4L2_SLICED_CAPTION_625,22,22,1}, + { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, + 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } + }, +#endif + {0x0f0, /* Closed Caption, NTSC */ + {V4L2_SLICED_CAPTION_525,21,21,1}, + { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, + 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } + }, + {0x110, /* Wide Screen Signal, PAL/SECAM */ + {V4L2_SLICED_WSS_625,23,23,1}, + { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42, + 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 } + }, +#if 0 + {0x130, /* Wide Screen Signal, NTSC C */ + {V4L2_SLICED_WSS_525,20,20,1}, + { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43, + 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 } + }, + {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */ + {V4l2_SLICED_VITC_625,6,22,0}, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, + 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } + }, + {0x170, /* Vertical Interval Timecode (VITC), NTSC */ + {V4l2_SLICED_VITC_525,10,20,0}, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, + 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } + }, +#endif + {0x190, /* Video Program System (VPS), PAL */ + {V4L2_SLICED_VPS,16,16,0}, + { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d, + 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 } + }, + /* 0x1d0 User programmable */ + + /* End of struct */ + { (u16)-1 } +}; + +static int tvp5150_write_inittab(struct v4l2_subdev *sd, + const struct i2c_reg_value *regs) +{ + while (regs->reg != 0xff) { + tvp5150_write(sd, regs->reg, regs->value); + regs++; + } + return 0; +} + +static int tvp5150_vdp_init(struct v4l2_subdev *sd, + const struct i2c_vbi_ram_value *regs) +{ + unsigned int i; + + /* Disable Full Field */ + tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0); + + /* Before programming, Line mode should be at 0xff */ + for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++) + tvp5150_write(sd, i, 0xff); + + /* Load Ram Table */ + while (regs->reg != (u16)-1) { + tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8); + tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg); + + for (i = 0; i < 16; i++) + tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]); + + regs++; + } + return 0; +} + +/* Fills VBI capabilities based on i2c_vbi_ram_value struct */ +static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd, + struct v4l2_sliced_vbi_cap *cap) +{ + const struct i2c_vbi_ram_value *regs = vbi_ram_default; + int line; + + v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n"); + memset(cap, 0, sizeof *cap); + + while (regs->reg != (u16)-1 ) { + for (line=regs->type.ini_line;line<=regs->type.end_line;line++) { + cap->service_lines[0][line] |= regs->type.vbi_type; + } + cap->service_set |= regs->type.vbi_type; + + regs++; + } + return 0; +} + +/* Set vbi processing + * type - one of tvp5150_vbi_types + * line - line to gather data + * fields: bit 0 field1, bit 1, field2 + * flags (default=0xf0) is a bitmask, were set means: + * bit 7: enable filtering null bytes on CC + * bit 6: send data also to FIFO + * bit 5: don't allow data with errors on FIFO + * bit 4: enable ECC when possible + * pix_align = pix alignment: + * LSB = field1 + * MSB = field2 + */ +static int tvp5150_set_vbi(struct v4l2_subdev *sd, + const struct i2c_vbi_ram_value *regs, + unsigned int type,u8 flags, int line, + const int fields) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + v4l2_std_id std = decoder->norm; + u8 reg; + int pos=0; + + if (std == V4L2_STD_ALL) { + v4l2_err(sd, "VBI can't be configured without knowing number of lines\n"); + return 0; + } else if (std & V4L2_STD_625_50) { + /* Don't follow NTSC Line number convension */ + line += 3; + } + + if (line<6||line>27) + return 0; + + while (regs->reg != (u16)-1 ) { + if ((type & regs->type.vbi_type) && + (line>=regs->type.ini_line) && + (line<=regs->type.end_line)) { + type=regs->type.vbi_type; + break; + } + + regs++; + pos++; + } + if (regs->reg == (u16)-1) + return 0; + + type=pos | (flags & 0xf0); + reg=((line-6)<<1)+TVP5150_LINE_MODE_INI; + + if (fields&1) { + tvp5150_write(sd, reg, type); + } + + if (fields&2) { + tvp5150_write(sd, reg+1, type); + } + + return type; +} + +static int tvp5150_get_vbi(struct v4l2_subdev *sd, + const struct i2c_vbi_ram_value *regs, int line) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + v4l2_std_id std = decoder->norm; + u8 reg; + int pos, type = 0; + int i, ret = 0; + + if (std == V4L2_STD_ALL) { + v4l2_err(sd, "VBI can't be configured without knowing number of lines\n"); + return 0; + } else if (std & V4L2_STD_625_50) { + /* Don't follow NTSC Line number convension */ + line += 3; + } + + if (line < 6 || line > 27) + return 0; + + reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI; + + for (i = 0; i <= 1; i++) { + ret = tvp5150_read(sd, reg + i); + if (ret < 0) { + v4l2_err(sd, "%s: failed with error = %d\n", + __func__, ret); + return 0; + } + pos = ret & 0x0f; + if (pos < 0x0f) + type |= regs[pos].type.vbi_type; + } + + return type; +} + +static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + int fmt = 0; + + decoder->norm = std; + + /* First tests should be against specific std */ + + if (std == V4L2_STD_ALL) { + fmt = VIDEO_STD_AUTO_SWITCH_BIT; /* Autodetect mode */ + } else if (std & V4L2_STD_NTSC_443) { + fmt = VIDEO_STD_NTSC_4_43_BIT; + } else if (std & V4L2_STD_PAL_M) { + fmt = VIDEO_STD_PAL_M_BIT; + } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) { + fmt = VIDEO_STD_PAL_COMBINATION_N_BIT; + } else { + /* Then, test against generic ones */ + if (std & V4L2_STD_NTSC) + fmt = VIDEO_STD_NTSC_MJ_BIT; + else if (std & V4L2_STD_PAL) + fmt = VIDEO_STD_PAL_BDGHIN_BIT; + else if (std & V4L2_STD_SECAM) + fmt = VIDEO_STD_SECAM_BIT; + } + + v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt); + tvp5150_write(sd, TVP5150_VIDEO_STD, fmt); + return 0; +} + +static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + + if (decoder->norm == std) + return 0; + + /* Change cropping height limits */ + if (std & V4L2_STD_525_60) + decoder->rect.height = TVP5150_V_MAX_525_60; + else + decoder->rect.height = TVP5150_V_MAX_OTHERS; + + + return tvp5150_set_std(sd, std); +} + +static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + + /* Initializes TVP5150 to its default values */ + tvp5150_write_inittab(sd, tvp5150_init_default); + + /* Initializes VDP registers */ + tvp5150_vdp_init(sd, vbi_ram_default); + + /* Selects decoder input */ + tvp5150_selmux(sd); + + /* Initializes TVP5150 to stream enabled values */ + tvp5150_write_inittab(sd, tvp5150_init_enable); + + /* Initialize image preferences */ + v4l2_ctrl_handler_setup(&decoder->hdl); + + tvp5150_set_std(sd, decoder->norm); + return 0; +}; + +static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val); + return 0; + case V4L2_CID_CONTRAST: + tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val); + return 0; + case V4L2_CID_SATURATION: + tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val); + return 0; + case V4L2_CID_HUE: + tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val); + return 0; + } + return -EINVAL; +} + +static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd) +{ + int val = tvp5150_read(sd, TVP5150_STATUS_REG_5); + + switch (val & 0x0F) { + case 0x01: + return V4L2_STD_NTSC; + case 0x03: + return V4L2_STD_PAL; + case 0x05: + return V4L2_STD_PAL_M; + case 0x07: + return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc; + case 0x09: + return V4L2_STD_NTSC_443; + case 0xb: + return V4L2_STD_SECAM; + default: + return V4L2_STD_UNKNOWN; + } +} + +static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_UYVY8_2X8; + return 0; +} + +static int tvp5150_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *f) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + + if (f == NULL) + return -EINVAL; + + tvp5150_reset(sd, 0); + + f->width = decoder->rect.width; + f->height = decoder->rect.height; + + f->code = V4L2_MBUS_FMT_UYVY8_2X8; + f->field = V4L2_FIELD_SEQ_TB; + f->colorspace = V4L2_COLORSPACE_SMPTE170M; + + v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width, + f->height); + return 0; +} + +static int tvp5150_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct v4l2_rect rect = a->c; + struct tvp5150 *decoder = to_tvp5150(sd); + v4l2_std_id std; + int hmax; + + v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n", + __func__, rect.left, rect.top, rect.width, rect.height); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + /* tvp5150 has some special limits */ + rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT); + rect.width = clamp(rect.width, + TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left, + TVP5150_H_MAX - rect.left); + rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP); + + /* Calculate height based on current standard */ + if (decoder->norm == V4L2_STD_ALL) + std = tvp5150_read_std(sd); + else + std = decoder->norm; + + if (std & V4L2_STD_525_60) + hmax = TVP5150_V_MAX_525_60; + else + hmax = TVP5150_V_MAX_OTHERS; + + rect.height = clamp(rect.height, + hmax - TVP5150_MAX_CROP_TOP - rect.top, + hmax - rect.top); + + tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top); + tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, + rect.top + rect.height - hmax); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB, + rect.left >> TVP5150_CROP_SHIFT); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB, + rect.left | (1 << TVP5150_CROP_SHIFT)); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB, + (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >> + TVP5150_CROP_SHIFT); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB, + rect.left + rect.width - TVP5150_MAX_CROP_LEFT); + + decoder->rect = rect; + + return 0; +} + +static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); + + a->c = decoder->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); + v4l2_std_id std; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = TVP5150_H_MAX; + + /* Calculate height based on current standard */ + if (decoder->norm == V4L2_STD_ALL) + std = tvp5150_read_std(sd); + else + std = decoder->norm; + + if (std & V4L2_STD_525_60) + a->bounds.height = TVP5150_V_MAX_525_60; + else + a->bounds.height = TVP5150_V_MAX_OTHERS; + + a->defrect = a->bounds; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +/**************************************************************************** + I2C Command + ****************************************************************************/ + +static int tvp5150_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + + decoder->input = input; + decoder->output = output; + tvp5150_selmux(sd); + return 0; +} + +static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) +{ + /* this is for capturing 36 raw vbi lines + if there's a way to cut off the beginning 2 vbi lines + with the tvp5150 then the vbi line count could be lowered + to 17 lines/field again, although I couldn't find a register + which could do that cropping */ + if (fmt->sample_format == V4L2_PIX_FMT_GREY) + tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70); + if (fmt->count[0] == 18 && fmt->count[1] == 18) { + tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00); + tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01); + } + return 0; +} + +static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + int i; + + if (svbi->service_set != 0) { + for (i = 0; i <= 23; i++) { + svbi->service_lines[1][i] = 0; + svbi->service_lines[0][i] = + tvp5150_set_vbi(sd, vbi_ram_default, + svbi->service_lines[0][i], 0xf0, i, 3); + } + /* Enables FIFO */ + tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1); + } else { + /* Disables FIFO*/ + tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0); + + /* Disable Full Field */ + tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0); + + /* Disable Line modes */ + for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++) + tvp5150_write(sd, i, 0xff); + } + return 0; +} + +static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + int i, mask = 0; + + memset(svbi->service_lines, 0, sizeof(svbi->service_lines)); + + for (i = 0; i <= 23; i++) { + svbi->service_lines[0][i] = + tvp5150_get_vbi(sd, vbi_ram_default, i); + mask |= svbi->service_lines[0][i]; + } + svbi->service_set = mask; + return 0; +} + +static int tvp5150_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + rev = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER) << 8 | + tvp5150_read(sd, TVP5150_ROM_MINOR_VER); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP5150, + rev); +} + + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + int res; + + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + res = tvp5150_read(sd, reg->reg & 0xff); + if (res < 0) { + v4l2_err(sd, "%s: failed with error = %d\n", __func__, res); + return res; + } + + reg->val = res; + reg->size = 1; + return 0; +} + +static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + int status = tvp5150_read(sd, 0x88); + + vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = { + .s_ctrl = tvp5150_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tvp5150_core_ops = { + .log_status = tvp5150_log_status, + .s_std = tvp5150_s_std, + .reset = tvp5150_reset, + .g_chip_ident = tvp5150_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = tvp5150_g_register, + .s_register = tvp5150_s_register, +#endif +}; + +static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = { + .g_tuner = tvp5150_g_tuner, +}; + +static const struct v4l2_subdev_video_ops tvp5150_video_ops = { + .s_routing = tvp5150_s_routing, + .enum_mbus_fmt = tvp5150_enum_mbus_fmt, + .s_mbus_fmt = tvp5150_mbus_fmt, + .try_mbus_fmt = tvp5150_mbus_fmt, + .g_mbus_fmt = tvp5150_mbus_fmt, + .s_crop = tvp5150_s_crop, + .g_crop = tvp5150_g_crop, + .cropcap = tvp5150_cropcap, +}; + +static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { + .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap, + .g_sliced_fmt = tvp5150_g_sliced_fmt, + .s_sliced_fmt = tvp5150_s_sliced_fmt, + .s_raw_fmt = tvp5150_s_raw_fmt, +}; + +static const struct v4l2_subdev_ops tvp5150_ops = { + .core = &tvp5150_core_ops, + .tuner = &tvp5150_tuner_ops, + .video = &tvp5150_video_ops, + .vbi = &tvp5150_vbi_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int tvp5150_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + struct tvp5150 *core; + struct v4l2_subdev *sd; + int tvp5150_id[4]; + int i, res; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL); + if (!core) { + return -ENOMEM; + } + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &tvp5150_ops); + + /* + * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID, + * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER + */ + for (i = 0; i < 4; i++) { + res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i); + if (res < 0) + goto free_core; + tvp5150_id[i] = res; + } + + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + if (tvp5150_id[2] == 4 && tvp5150_id[3] == 0) { /* Is TVP5150AM1 */ + v4l2_info(sd, "tvp%02x%02xam1 detected.\n", + tvp5150_id[0], tvp5150_id[1]); + + /* ITU-T BT.656.4 timing */ + tvp5150_write(sd, TVP5150_REV_SELECT, 0); + } else { + /* Is TVP5150A */ + if (tvp5150_id[2] == 3 || tvp5150_id[3] == 0x21) { + v4l2_info(sd, "tvp%02x%02xa detected.\n", + tvp5150_id[2], tvp5150_id[3]); + } else { + v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n", + tvp5150_id[2], tvp5150_id[3]); + v4l2_info(sd, "*** Rom ver is %d.%d\n", + tvp5150_id[2], tvp5150_id[3]); + } + } + + core->norm = V4L2_STD_ALL; /* Default is autodetect */ + core->input = TVP5150_COMPOSITE1; + core->enable = 1; + + v4l2_ctrl_handler_init(&core->hdl, 4); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &core->hdl; + if (core->hdl.error) { + res = core->hdl.error; + v4l2_ctrl_handler_free(&core->hdl); + goto free_core; + } + v4l2_ctrl_handler_setup(&core->hdl); + + /* Default is no cropping */ + core->rect.top = 0; + if (tvp5150_read_std(sd) & V4L2_STD_525_60) + core->rect.height = TVP5150_V_MAX_525_60; + else + core->rect.height = TVP5150_V_MAX_OTHERS; + core->rect.left = 0; + core->rect.width = TVP5150_H_MAX; + + if (debug > 1) + tvp5150_log_status(sd); + return 0; + +free_core: + kfree(core); + return res; +} + +static int tvp5150_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + struct tvp5150 *decoder = to_tvp5150(sd); + + v4l2_dbg(1, debug, sd, + "tvp5150.c: removing tvp5150 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(to_tvp5150(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id tvp5150_id[] = { + { "tvp5150", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tvp5150_id); + +static struct i2c_driver tvp5150_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tvp5150", + }, + .probe = tvp5150_probe, + .remove = tvp5150_remove, + .id_table = tvp5150_id, +}; + +module_i2c_driver(tvp5150_driver); diff --git a/drivers/media/i2c/tvp5150_reg.h b/drivers/media/i2c/tvp5150_reg.h new file mode 100644 index 00000000..25a99494 --- /dev/null +++ b/drivers/media/i2c/tvp5150_reg.h @@ -0,0 +1,139 @@ +/* + * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder registers + * + * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#define TVP5150_VD_IN_SRC_SEL_1 0x00 /* Video input source selection #1 */ +#define TVP5150_ANAL_CHL_CTL 0x01 /* Analog channel controls */ +#define TVP5150_OP_MODE_CTL 0x02 /* Operation mode controls */ +#define TVP5150_MISC_CTL 0x03 /* Miscellaneous controls */ +#define TVP5150_AUTOSW_MSK 0x04 /* Autoswitch mask: TVP5150A / TVP5150AM */ + +/* Reserved 05h */ + +#define TVP5150_COLOR_KIL_THSH_CTL 0x06 /* Color killer threshold control */ +#define TVP5150_LUMA_PROC_CTL_1 0x07 /* Luminance processing control #1 */ +#define TVP5150_LUMA_PROC_CTL_2 0x08 /* Luminance processing control #2 */ +#define TVP5150_BRIGHT_CTL 0x09 /* Brightness control */ +#define TVP5150_SATURATION_CTL 0x0a /* Color saturation control */ +#define TVP5150_HUE_CTL 0x0b /* Hue control */ +#define TVP5150_CONTRAST_CTL 0x0c /* Contrast control */ +#define TVP5150_DATA_RATE_SEL 0x0d /* Outputs and data rates select */ +#define TVP5150_LUMA_PROC_CTL_3 0x0e /* Luminance processing control #3 */ +#define TVP5150_CONF_SHARED_PIN 0x0f /* Configuration shared pins */ + +/* Reserved 10h */ + +#define TVP5150_ACT_VD_CROP_ST_MSB 0x11 /* Active video cropping start MSB */ +#define TVP5150_ACT_VD_CROP_ST_LSB 0x12 /* Active video cropping start LSB */ +#define TVP5150_ACT_VD_CROP_STP_MSB 0x13 /* Active video cropping stop MSB */ +#define TVP5150_ACT_VD_CROP_STP_LSB 0x14 /* Active video cropping stop LSB */ +#define TVP5150_GENLOCK 0x15 /* Genlock/RTC */ +#define TVP5150_HORIZ_SYNC_START 0x16 /* Horizontal sync start */ + +/* Reserved 17h */ + +#define TVP5150_VERT_BLANKING_START 0x18 /* Vertical blanking start */ +#define TVP5150_VERT_BLANKING_STOP 0x19 /* Vertical blanking stop */ +#define TVP5150_CHROMA_PROC_CTL_1 0x1a /* Chrominance processing control #1 */ +#define TVP5150_CHROMA_PROC_CTL_2 0x1b /* Chrominance processing control #2 */ +#define TVP5150_INT_RESET_REG_B 0x1c /* Interrupt reset register B */ +#define TVP5150_INT_ENABLE_REG_B 0x1d /* Interrupt enable register B */ +#define TVP5150_INTT_CONFIG_REG_B 0x1e /* Interrupt configuration register B */ + +/* Reserved 1Fh-27h */ + +#define VIDEO_STD_MASK (0x07 >> 1) +#define TVP5150_VIDEO_STD 0x28 /* Video standard */ +#define VIDEO_STD_AUTO_SWITCH_BIT 0x00 +#define VIDEO_STD_NTSC_MJ_BIT 0x02 +#define VIDEO_STD_PAL_BDGHIN_BIT 0x04 +#define VIDEO_STD_PAL_M_BIT 0x06 +#define VIDEO_STD_PAL_COMBINATION_N_BIT 0x08 +#define VIDEO_STD_NTSC_4_43_BIT 0x0a +#define VIDEO_STD_SECAM_BIT 0x0c + +#define VIDEO_STD_NTSC_MJ_BIT_AS 0x01 +#define VIDEO_STD_PAL_BDGHIN_BIT_AS 0x03 +#define VIDEO_STD_PAL_M_BIT_AS 0x05 +#define VIDEO_STD_PAL_COMBINATION_N_BIT_AS 0x07 +#define VIDEO_STD_NTSC_4_43_BIT_AS 0x09 +#define VIDEO_STD_SECAM_BIT_AS 0x0b + +/* Reserved 29h-2bh */ + +#define TVP5150_CB_GAIN_FACT 0x2c /* Cb gain factor */ +#define TVP5150_CR_GAIN_FACTOR 0x2d /* Cr gain factor */ +#define TVP5150_MACROVISION_ON_CTR 0x2e /* Macrovision on counter */ +#define TVP5150_MACROVISION_OFF_CTR 0x2f /* Macrovision off counter */ +#define TVP5150_REV_SELECT 0x30 /* revision select (TVP5150AM1 only) */ + +/* Reserved 31h-7Fh */ + +#define TVP5150_MSB_DEV_ID 0x80 /* MSB of device ID */ +#define TVP5150_LSB_DEV_ID 0x81 /* LSB of device ID */ +#define TVP5150_ROM_MAJOR_VER 0x82 /* ROM major version */ +#define TVP5150_ROM_MINOR_VER 0x83 /* ROM minor version */ +#define TVP5150_VERT_LN_COUNT_MSB 0x84 /* Vertical line count MSB */ +#define TVP5150_VERT_LN_COUNT_LSB 0x85 /* Vertical line count LSB */ +#define TVP5150_INT_STATUS_REG_B 0x86 /* Interrupt status register B */ +#define TVP5150_INT_ACTIVE_REG_B 0x87 /* Interrupt active register B */ +#define TVP5150_STATUS_REG_1 0x88 /* Status register #1 */ +#define TVP5150_STATUS_REG_2 0x89 /* Status register #2 */ +#define TVP5150_STATUS_REG_3 0x8a /* Status register #3 */ +#define TVP5150_STATUS_REG_4 0x8b /* Status register #4 */ +#define TVP5150_STATUS_REG_5 0x8c /* Status register #5 */ +/* Reserved 8Dh-8Fh */ + /* Closed caption data registers */ +#define TVP5150_CC_DATA_INI 0x90 +#define TVP5150_CC_DATA_END 0x93 + + /* WSS data registers */ +#define TVP5150_WSS_DATA_INI 0x94 +#define TVP5150_WSS_DATA_END 0x99 + +/* VPS data registers */ +#define TVP5150_VPS_DATA_INI 0x9a +#define TVP5150_VPS_DATA_END 0xa6 + +/* VITC data registers */ +#define TVP5150_VITC_DATA_INI 0xa7 +#define TVP5150_VITC_DATA_END 0xaf + +#define TVP5150_VBI_FIFO_READ_DATA 0xb0 /* VBI FIFO read data */ + +/* Teletext filter 1 */ +#define TVP5150_TELETEXT_FIL1_INI 0xb1 +#define TVP5150_TELETEXT_FIL1_END 0xb5 + +/* Teletext filter 2 */ +#define TVP5150_TELETEXT_FIL2_INI 0xb6 +#define TVP5150_TELETEXT_FIL2_END 0xba + +#define TVP5150_TELETEXT_FIL_ENA 0xbb /* Teletext filter enable */ +/* Reserved BCh-BFh */ +#define TVP5150_INT_STATUS_REG_A 0xc0 /* Interrupt status register A */ +#define TVP5150_INT_ENABLE_REG_A 0xc1 /* Interrupt enable register A */ +#define TVP5150_INT_CONF 0xc2 /* Interrupt configuration */ +#define TVP5150_VDP_CONF_RAM_DATA 0xc3 /* VDP configuration RAM data */ +#define TVP5150_CONF_RAM_ADDR_LOW 0xc4 /* Configuration RAM address low byte */ +#define TVP5150_CONF_RAM_ADDR_HIGH 0xc5 /* Configuration RAM address high byte */ +#define TVP5150_VDP_STATUS_REG 0xc6 /* VDP status register */ +#define TVP5150_FIFO_WORD_COUNT 0xc7 /* FIFO word count */ +#define TVP5150_FIFO_INT_THRESHOLD 0xc8 /* FIFO interrupt threshold */ +#define TVP5150_FIFO_RESET 0xc9 /* FIFO reset */ +#define TVP5150_LINE_NUMBER_INT 0xca /* Line number interrupt */ +#define TVP5150_PIX_ALIGN_REG_LOW 0xcb /* Pixel alignment register low byte */ +#define TVP5150_PIX_ALIGN_REG_HIGH 0xcc /* Pixel alignment register high byte */ +#define TVP5150_FIFO_OUT_CTRL 0xcd /* FIFO output control */ +/* Reserved CEh */ +#define TVP5150_FULL_FIELD_ENA 0xcf /* Full field enable 1 */ + +/* Line mode registers */ +#define TVP5150_LINE_MODE_INI 0xd0 +#define TVP5150_LINE_MODE_END 0xfb + +#define TVP5150_FULL_FIELD_MODE_REG 0xfc /* Full field mode register */ +/* Reserved FDh-FFh */ diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c new file mode 100644 index 00000000..027809cc --- /dev/null +++ b/drivers/media/i2c/tvp7002.c @@ -0,0 +1,1049 @@ +/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics + * Digitizer with Horizontal PLL registers + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Santiago Nunez-Corrales + * + * This code is partially based upon the TVP5150 driver + * written by Mauro Carvalho Chehab (mchehab@infradead.org), + * the TVP514x driver written by Vaibhav Hiremath + * and the TVP7002 driver in the TI LSP 2.10.00.14. Revisions by + * Muralidharan Karicheri and Snehaprabha Narnakaje (TI). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tvp7002_reg.h" + +MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver"); +MODULE_AUTHOR("Santiago Nunez-Corrales "); +MODULE_LICENSE("GPL"); + +/* Module Name */ +#define TVP7002_MODULE_NAME "tvp7002" + +/* I2C retry attempts */ +#define I2C_RETRY_COUNT (5) + +/* End of registers */ +#define TVP7002_EOR 0x5c + +/* Read write definition for registers */ +#define TVP7002_READ 0 +#define TVP7002_WRITE 1 +#define TVP7002_RESERVED 2 + +/* Interlaced vs progressive mask and shift */ +#define TVP7002_IP_SHIFT 5 +#define TVP7002_INPR_MASK (0x01 << TVP7002_IP_SHIFT) + +/* Shift for CPL and LPF registers */ +#define TVP7002_CL_SHIFT 8 +#define TVP7002_CL_MASK 0x0f + +/* Debug functions */ +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* Structure for register values */ +struct i2c_reg_value { + u8 reg; + u8 value; + u8 type; +}; + +/* + * Register default values (according to tvp7002 datasheet) + * In the case of read-only registers, the value (0xff) is + * never written. R/W functionality is controlled by the + * writable bit in the register struct definition. + */ +static const struct i2c_reg_value tvp7002_init_default[] = { + { TVP7002_CHIP_REV, 0xff, TVP7002_READ }, + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE }, + { TVP7002_HPLL_PHASE_SEL, 0x80, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HSYNC_OUT_W, 0x60, TVP7002_WRITE }, + { TVP7002_B_FINE_GAIN, 0x00, TVP7002_WRITE }, + { TVP7002_G_FINE_GAIN, 0x00, TVP7002_WRITE }, + { TVP7002_R_FINE_GAIN, 0x00, TVP7002_WRITE }, + { TVP7002_B_FINE_OFF_MSBS, 0x80, TVP7002_WRITE }, + { TVP7002_G_FINE_OFF_MSBS, 0x80, TVP7002_WRITE }, + { TVP7002_R_FINE_OFF_MSBS, 0x80, TVP7002_WRITE }, + { TVP7002_SYNC_CTL_1, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_AND_CLAMP_CTL, 0x2e, TVP7002_WRITE }, + { TVP7002_SYNC_ON_G_THRS, 0x5d, TVP7002_WRITE }, + { TVP7002_SYNC_SEPARATOR_THRS, 0x47, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_SYNC_DETECT_STAT, 0xff, TVP7002_READ }, + { TVP7002_OUT_FORMATTER, 0x47, TVP7002_WRITE }, + { TVP7002_MISC_CTL_1, 0x01, TVP7002_WRITE }, + { TVP7002_MISC_CTL_2, 0x00, TVP7002_WRITE }, + { TVP7002_MISC_CTL_3, 0x01, TVP7002_WRITE }, + { TVP7002_IN_MUX_SEL_1, 0x00, TVP7002_WRITE }, + { TVP7002_IN_MUX_SEL_2, 0x67, TVP7002_WRITE }, + { TVP7002_B_AND_G_COARSE_GAIN, 0x77, TVP7002_WRITE }, + { TVP7002_R_COARSE_GAIN, 0x07, TVP7002_WRITE }, + { TVP7002_FINE_OFF_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_B_COARSE_OFF, 0x10, TVP7002_WRITE }, + { TVP7002_G_COARSE_OFF, 0x10, TVP7002_WRITE }, + { TVP7002_R_COARSE_OFF, 0x10, TVP7002_WRITE }, + { TVP7002_HSOUT_OUT_START, 0x08, TVP7002_WRITE }, + { TVP7002_MISC_CTL_4, 0x00, TVP7002_WRITE }, + { TVP7002_B_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_G_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_R_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_AUTO_LVL_CTL_ENABLE, 0x80, TVP7002_WRITE }, + { TVP7002_DGTL_ALC_OUT_MSBS, 0xff, TVP7002_READ }, + { TVP7002_AUTO_LVL_CTL_FILTER, 0x53, TVP7002_WRITE }, + { 0x29, 0x08, TVP7002_RESERVED }, + { TVP7002_FINE_CLAMP_CTL, 0x07, TVP7002_WRITE }, + /* PWR_CTL is controlled only by the probe and reset functions */ + { TVP7002_PWR_CTL, 0x00, TVP7002_RESERVED }, + { TVP7002_ADC_SETUP, 0x50, TVP7002_WRITE }, + { TVP7002_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE }, + { TVP7002_SOG_CLAMP, 0x80, TVP7002_WRITE }, + { TVP7002_RGB_COARSE_CLAMP_CTL, 0x8c, TVP7002_WRITE }, + { TVP7002_SOG_COARSE_CLAMP_CTL, 0x04, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { 0x32, 0x18, TVP7002_RESERVED }, + { 0x33, 0x60, TVP7002_RESERVED }, + { TVP7002_MVIS_STRIPPER_W, 0xff, TVP7002_RESERVED }, + { TVP7002_VSYNC_ALGN, 0x10, TVP7002_WRITE }, + { TVP7002_SYNC_BYPASS, 0x00, TVP7002_WRITE }, + { TVP7002_L_FRAME_STAT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_L_FRAME_STAT_MSBS, 0xff, TVP7002_READ }, + { TVP7002_CLK_L_STAT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_CLK_L_STAT_MSBS, 0xff, TVP7002_READ }, + { TVP7002_HSYNC_W, 0xff, TVP7002_READ }, + { TVP7002_VSYNC_W, 0xff, TVP7002_READ }, + { TVP7002_L_LENGTH_TOL, 0x03, TVP7002_WRITE }, + { 0x3e, 0x60, TVP7002_RESERVED }, + { TVP7002_VIDEO_BWTH_CTL, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x2c, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x06, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x2c, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x1e, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE }, + { TVP7002_FBIT_F_0_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_FBIT_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_YUV_Y_G_COEF_LSBS, 0xe3, TVP7002_WRITE }, + { TVP7002_YUV_Y_G_COEF_MSBS, 0x16, TVP7002_WRITE }, + { TVP7002_YUV_Y_B_COEF_LSBS, 0x4f, TVP7002_WRITE }, + { TVP7002_YUV_Y_B_COEF_MSBS, 0x02, TVP7002_WRITE }, + { TVP7002_YUV_Y_R_COEF_LSBS, 0xce, TVP7002_WRITE }, + { TVP7002_YUV_Y_R_COEF_MSBS, 0x06, TVP7002_WRITE }, + { TVP7002_YUV_U_G_COEF_LSBS, 0xab, TVP7002_WRITE }, + { TVP7002_YUV_U_G_COEF_MSBS, 0xf3, TVP7002_WRITE }, + { TVP7002_YUV_U_B_COEF_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_YUV_U_B_COEF_MSBS, 0x10, TVP7002_WRITE }, + { TVP7002_YUV_U_R_COEF_LSBS, 0x55, TVP7002_WRITE }, + { TVP7002_YUV_U_R_COEF_MSBS, 0xfc, TVP7002_WRITE }, + { TVP7002_YUV_V_G_COEF_LSBS, 0x78, TVP7002_WRITE }, + { TVP7002_YUV_V_G_COEF_MSBS, 0xf1, TVP7002_WRITE }, + { TVP7002_YUV_V_B_COEF_LSBS, 0x88, TVP7002_WRITE }, + { TVP7002_YUV_V_B_COEF_MSBS, 0xfe, TVP7002_WRITE }, + { TVP7002_YUV_V_R_COEF_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_YUV_V_R_COEF_MSBS, 0x10, TVP7002_WRITE }, + /* This signals end of register values */ + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 480P */ +static const struct i2c_reg_value tvp7002_parms_480P[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0xa0, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0B, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x03, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x01, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x13, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x13, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 576P */ +static const struct i2c_reg_value tvp7002_parms_576P[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x36, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x18, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x9B, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0F, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 1080I60 */ +static const struct i2c_reg_value tvp7002_parms_1080I60[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 1080P60 */ +static const struct i2c_reg_value tvp7002_parms_1080P60[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 1080I50 */ +static const struct i2c_reg_value tvp7002_parms_1080I50[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0xa5, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 720P60 */ +static const struct i2c_reg_value tvp7002_parms_720P60[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 720P50 */ +static const struct i2c_reg_value tvp7002_parms_720P50[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0xc0, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Timings definition for handling device operation */ +struct tvp7002_timings_definition { + struct v4l2_dv_timings timings; + const struct i2c_reg_value *p_settings; + enum v4l2_colorspace color_space; + enum v4l2_field scanmode; + u16 progressive; + u16 lines_per_frame; + u16 cpl_min; + u16 cpl_max; +}; + +/* Struct list for digital video timings */ +static const struct tvp7002_timings_definition tvp7002_timings[] = { + { + V4L2_DV_BT_CEA_1280X720P60, + tvp7002_parms_720P60, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_NONE, + 1, + 0x2EE, + 135, + 153 + }, + { + V4L2_DV_BT_CEA_1920X1080I60, + tvp7002_parms_1080I60, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_INTERLACED, + 0, + 0x465, + 181, + 205 + }, + { + V4L2_DV_BT_CEA_1920X1080I50, + tvp7002_parms_1080I50, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_INTERLACED, + 0, + 0x465, + 217, + 245 + }, + { + V4L2_DV_BT_CEA_1280X720P50, + tvp7002_parms_720P50, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_NONE, + 1, + 0x2EE, + 163, + 183 + }, + { + V4L2_DV_BT_CEA_1920X1080P60, + tvp7002_parms_1080P60, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_NONE, + 1, + 0x465, + 90, + 102 + }, + { + V4L2_DV_BT_CEA_720X480P59_94, + tvp7002_parms_480P, + V4L2_COLORSPACE_SMPTE170M, + V4L2_FIELD_NONE, + 1, + 0x20D, + 0xffff, + 0xffff + }, + { + V4L2_DV_BT_CEA_720X576P50, + tvp7002_parms_576P, + V4L2_COLORSPACE_SMPTE170M, + V4L2_FIELD_NONE, + 1, + 0x271, + 0xffff, + 0xffff + } +}; + +#define NUM_TIMINGS ARRAY_SIZE(tvp7002_timings) + +/* Device definition */ +struct tvp7002 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + const struct tvp7002_config *pdata; + + int ver; + int streaming; + + const struct tvp7002_timings_definition *current_timings; +}; + +/* + * to_tvp7002 - Obtain device handler TVP7002 + * @sd: ptr to v4l2_subdev struct + * + * Returns device handler tvp7002. + */ +static inline struct tvp7002 *to_tvp7002(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tvp7002, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp7002, hdl)->sd; +} + +/* + * tvp7002_read - Read a value from a register in an TVP7002 + * @sd: ptr to v4l2_subdev struct + * @addr: TVP7002 register address + * @dst: pointer to 8-bit destination + * + * Returns value read if successful, or non-zero (-1) otherwise. + */ +static int tvp7002_read(struct v4l2_subdev *sd, u8 addr, u8 *dst) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + int retry; + int error; + + for (retry = 0; retry < I2C_RETRY_COUNT; retry++) { + error = i2c_smbus_read_byte_data(c, addr); + + if (error >= 0) { + *dst = (u8)error; + return 0; + } + + msleep_interruptible(10); + } + v4l2_err(sd, "TVP7002 read error %d\n", error); + return error; +} + +/* + * tvp7002_read_err() - Read a register value with error code + * @sd: pointer to standard V4L2 sub-device structure + * @reg: destination register + * @val: value to be read + * @err: pointer to error value + * + * Read a value in a register and save error value in pointer. + * Also update the register table if successful + */ +static inline void tvp7002_read_err(struct v4l2_subdev *sd, u8 reg, + u8 *dst, int *err) +{ + if (!*err) + *err = tvp7002_read(sd, reg, dst); +} + +/* + * tvp7002_write() - Write a value to a register in TVP7002 + * @sd: ptr to v4l2_subdev struct + * @addr: TVP7002 register address + * @value: value to be written to the register + * + * Write a value to a register in an TVP7002 decoder device. + * Returns zero if successful, or non-zero otherwise. + */ +static int tvp7002_write(struct v4l2_subdev *sd, u8 addr, u8 value) +{ + struct i2c_client *c; + int retry; + int error; + + c = v4l2_get_subdevdata(sd); + + for (retry = 0; retry < I2C_RETRY_COUNT; retry++) { + error = i2c_smbus_write_byte_data(c, addr, value); + + if (error >= 0) + return 0; + + v4l2_warn(sd, "Write: retry ... %d\n", retry); + msleep_interruptible(10); + } + v4l2_err(sd, "TVP7002 write error %d\n", error); + return error; +} + +/* + * tvp7002_write_err() - Write a register value with error code + * @sd: pointer to standard V4L2 sub-device structure + * @reg: destination register + * @val: value to be written + * @err: pointer to error value + * + * Write a value in a register and save error value in pointer. + * Also update the register table if successful + */ +static inline void tvp7002_write_err(struct v4l2_subdev *sd, u8 reg, + u8 val, int *err) +{ + if (!*err) + *err = tvp7002_write(sd, reg, val); +} + +/* + * tvp7002_g_chip_ident() - Get chip identification number + * @sd: ptr to v4l2_subdev struct + * @chip: ptr to v4l2_dbg_chip_ident struct + * + * Obtains the chip's identification number. + * Returns zero or -EINVAL if read operation fails. + */ +static int tvp7002_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + u8 rev; + int error; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + error = tvp7002_read(sd, TVP7002_CHIP_REV, &rev); + + if (error < 0) + return error; + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP7002, rev); +} + +/* + * tvp7002_write_inittab() - Write initialization values + * @sd: ptr to v4l2_subdev struct + * @regs: ptr to i2c_reg_value struct + * + * Write initialization values. + * Returns zero or -EINVAL if read operation fails. + */ +static int tvp7002_write_inittab(struct v4l2_subdev *sd, + const struct i2c_reg_value *regs) +{ + int error = 0; + + /* Initialize the first (defined) registers */ + while (TVP7002_EOR != regs->reg) { + if (TVP7002_WRITE == regs->type) + tvp7002_write_err(sd, regs->reg, regs->value, &error); + regs++; + } + + return error; +} + +static int tvp7002_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *dv_timings) +{ + struct tvp7002 *device = to_tvp7002(sd); + const struct v4l2_bt_timings *bt = &dv_timings->bt; + int i; + + if (dv_timings->type != V4L2_DV_BT_656_1120) + return -EINVAL; + for (i = 0; i < NUM_TIMINGS; i++) { + const struct v4l2_bt_timings *t = &tvp7002_timings[i].timings.bt; + + if (!memcmp(bt, t, &bt->standards - &bt->width)) { + device->current_timings = &tvp7002_timings[i]; + return tvp7002_write_inittab(sd, tvp7002_timings[i].p_settings); + } + } + return -EINVAL; +} + +static int tvp7002_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *dv_timings) +{ + struct tvp7002 *device = to_tvp7002(sd); + + *dv_timings = device->current_timings->timings; + return 0; +} + +/* + * tvp7002_s_ctrl() - Set a control + * @ctrl: ptr to v4l2_ctrl struct + * + * Set a control in TVP7002 decoder device. + * Returns zero when successful or -EINVAL if register access fails. + */ +static int tvp7002_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + int error = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + tvp7002_write_err(sd, TVP7002_R_FINE_GAIN, ctrl->val, &error); + tvp7002_write_err(sd, TVP7002_G_FINE_GAIN, ctrl->val, &error); + tvp7002_write_err(sd, TVP7002_B_FINE_GAIN, ctrl->val, &error); + return error; + } + return -EINVAL; +} + +/* + * tvp7002_mbus_fmt() - V4L2 decoder interface handler for try/s/g_mbus_fmt + * @sd: pointer to standard V4L2 sub-device structure + * @f: pointer to mediabus format structure + * + * Negotiate the image capture size and mediabus format. + * There is only one possible format, so this single function works for + * get, set and try. + */ +static int tvp7002_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) +{ + struct tvp7002 *device = to_tvp7002(sd); + const struct v4l2_bt_timings *bt = &device->current_timings->timings.bt; + + f->width = bt->width; + f->height = bt->height; + f->code = V4L2_MBUS_FMT_YUYV10_1X20; + f->field = device->current_timings->scanmode; + f->colorspace = device->current_timings->color_space; + + v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d", + f->width, f->height); + return 0; +} + +/* + * tvp7002_query_dv() - query DV timings + * @sd: pointer to standard V4L2 sub-device structure + * @index: index into the tvp7002_timings array + * + * Returns the current DV timings detected by TVP7002. If no active input is + * detected, returns -EINVAL + */ +static int tvp7002_query_dv(struct v4l2_subdev *sd, int *index) +{ + const struct tvp7002_timings_definition *timings = tvp7002_timings; + u8 progressive; + u32 lpfr; + u32 cpln; + int error = 0; + u8 lpf_lsb; + u8 lpf_msb; + u8 cpl_lsb; + u8 cpl_msb; + + /* Return invalid index if no active input is detected */ + *index = NUM_TIMINGS; + + /* Read standards from device registers */ + tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_LSBS, &lpf_lsb, &error); + tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_MSBS, &lpf_msb, &error); + + if (error < 0) + return error; + + tvp7002_read_err(sd, TVP7002_CLK_L_STAT_LSBS, &cpl_lsb, &error); + tvp7002_read_err(sd, TVP7002_CLK_L_STAT_MSBS, &cpl_msb, &error); + + if (error < 0) + return error; + + /* Get lines per frame, clocks per line and interlaced/progresive */ + lpfr = lpf_lsb | ((TVP7002_CL_MASK & lpf_msb) << TVP7002_CL_SHIFT); + cpln = cpl_lsb | ((TVP7002_CL_MASK & cpl_msb) << TVP7002_CL_SHIFT); + progressive = (lpf_msb & TVP7002_INPR_MASK) >> TVP7002_IP_SHIFT; + + /* Do checking of video modes */ + for (*index = 0; *index < NUM_TIMINGS; (*index)++, timings++) + if (lpfr == timings->lines_per_frame && + progressive == timings->progressive) { + if (timings->cpl_min == 0xffff) + break; + if (cpln >= timings->cpl_min && cpln <= timings->cpl_max) + break; + } + + if (*index == NUM_TIMINGS) { + v4l2_dbg(1, debug, sd, "detection failed: lpf = %x, cpl = %x\n", + lpfr, cpln); + return -ENOLINK; + } + + /* Update lines per frame and clocks per line info */ + v4l2_dbg(1, debug, sd, "detected timings: %d\n", *index); + return 0; +} + +static int tvp7002_query_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + int index; + int err = tvp7002_query_dv(sd, &index); + + if (err) + return err; + *timings = tvp7002_timings[index].timings; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * tvp7002_g_register() - Get the value of a register + * @sd: ptr to v4l2_subdev struct + * @reg: ptr to v4l2_dbg_register struct + * + * Get the value of a TVP7002 decoder device register. + * Returns zero when successful, -EINVAL if register read fails or + * access to I2C client fails, -EPERM if the call is not allowed + * by disabled CAP_SYS_ADMIN. + */ +static int tvp7002_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 val; + int ret; + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + ret = tvp7002_read(sd, reg->reg & 0xff, &val); + reg->val = val; + return ret; +} + +/* + * tvp7002_s_register() - set a control + * @sd: ptr to v4l2_subdev struct + * @reg: ptr to v4l2_dbg_register struct + * + * Get the value of a TVP7002 decoder device register. + * Returns zero when successful, -EINVAL if register read fails or + * -EPERM if call not allowed. + */ +static int tvp7002_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + return tvp7002_write(sd, reg->reg & 0xff, reg->val & 0xff); +} +#endif + +/* + * tvp7002_enum_mbus_fmt() - Enum supported mediabus formats + * @sd: pointer to standard V4L2 sub-device structure + * @index: format index + * @code: pointer to mediabus format + * + * Enumerate supported mediabus formats. + */ + +static int tvp7002_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + /* Check requested format index is within range */ + if (index) + return -EINVAL; + *code = V4L2_MBUS_FMT_YUYV10_1X20; + return 0; +} + +/* + * tvp7002_s_stream() - V4L2 decoder i/f handler for s_stream + * @sd: pointer to standard V4L2 sub-device structure + * @enable: streaming enable or disable + * + * Sets streaming to enable or disable, if possible. + */ +static int tvp7002_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct tvp7002 *device = to_tvp7002(sd); + int error = 0; + + if (device->streaming == enable) + return 0; + + if (enable) { + /* Set output state on (low impedance means stream on) */ + error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x00); + device->streaming = enable; + } else { + /* Set output state off (high impedance means stream off) */ + error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x03); + if (error) + v4l2_dbg(1, debug, sd, "Unable to stop streaming\n"); + + device->streaming = enable; + } + + return error; +} + +/* + * tvp7002_log_status() - Print information about register settings + * @sd: ptr to v4l2_subdev struct + * + * Log register values of a TVP7002 decoder device. + * Returns zero or -EINVAL if read operation fails. + */ +static int tvp7002_log_status(struct v4l2_subdev *sd) +{ + struct tvp7002 *device = to_tvp7002(sd); + const struct v4l2_bt_timings *bt; + int detected; + + /* Find my current timings */ + tvp7002_query_dv(sd, &detected); + + bt = &device->current_timings->timings.bt; + v4l2_info(sd, "Selected DV Timings: %ux%u\n", bt->width, bt->height); + if (detected == NUM_TIMINGS) { + v4l2_info(sd, "Detected DV Timings: None\n"); + } else { + bt = &tvp7002_timings[detected].timings.bt; + v4l2_info(sd, "Detected DV Timings: %ux%u\n", + bt->width, bt->height); + } + v4l2_info(sd, "Streaming enabled: %s\n", + device->streaming ? "yes" : "no"); + + /* Print the current value of the gain control */ + v4l2_ctrl_handler_log_status(&device->hdl, sd->name); + + return 0; +} + +static int tvp7002_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + /* Check requested format index is within range */ + if (timings->index >= NUM_TIMINGS) + return -EINVAL; + + timings->timings = tvp7002_timings[timings->index].timings; + return 0; +} + +static const struct v4l2_ctrl_ops tvp7002_ctrl_ops = { + .s_ctrl = tvp7002_s_ctrl, +}; + +/* V4L2 core operation handlers */ +static const struct v4l2_subdev_core_ops tvp7002_core_ops = { + .g_chip_ident = tvp7002_g_chip_ident, + .log_status = tvp7002_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = tvp7002_g_register, + .s_register = tvp7002_s_register, +#endif +}; + +/* Specific video subsystem operation handlers */ +static const struct v4l2_subdev_video_ops tvp7002_video_ops = { + .g_dv_timings = tvp7002_g_dv_timings, + .s_dv_timings = tvp7002_s_dv_timings, + .enum_dv_timings = tvp7002_enum_dv_timings, + .query_dv_timings = tvp7002_query_dv_timings, + .s_stream = tvp7002_s_stream, + .g_mbus_fmt = tvp7002_mbus_fmt, + .try_mbus_fmt = tvp7002_mbus_fmt, + .s_mbus_fmt = tvp7002_mbus_fmt, + .enum_mbus_fmt = tvp7002_enum_mbus_fmt, +}; + +/* V4L2 top level operation handlers */ +static const struct v4l2_subdev_ops tvp7002_ops = { + .core = &tvp7002_core_ops, + .video = &tvp7002_video_ops, +}; + +/* + * tvp7002_probe - Probe a TVP7002 device + * @c: ptr to i2c_client struct + * @id: ptr to i2c_device_id struct + * + * Initialize the TVP7002 device + * Returns zero when successful, -EINVAL if register read fails or + * -EIO if i2c access is not available. + */ +static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + struct tvp7002 *device; + struct v4l2_dv_timings timings; + int polarity_a; + int polarity_b; + u8 revision; + + int error; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + if (!c->dev.platform_data) { + v4l_err(c, "No platform data!!\n"); + return -ENODEV; + } + + device = devm_kzalloc(&c->dev, sizeof(struct tvp7002), GFP_KERNEL); + + if (!device) + return -ENOMEM; + + sd = &device->sd; + device->pdata = c->dev.platform_data; + device->current_timings = tvp7002_timings; + + /* Tell v4l2 the device is ready */ + v4l2_i2c_subdev_init(sd, c, &tvp7002_ops); + v4l_info(c, "tvp7002 found @ 0x%02x (%s)\n", + c->addr, c->adapter->name); + + error = tvp7002_read(sd, TVP7002_CHIP_REV, &revision); + if (error < 0) + return error; + + /* Get revision number */ + v4l2_info(sd, "Rev. %02x detected.\n", revision); + if (revision != 0x02) + v4l2_info(sd, "Unknown revision detected.\n"); + + /* Initializes TVP7002 to its default values */ + error = tvp7002_write_inittab(sd, tvp7002_init_default); + + if (error < 0) + return error; + + /* Set polarity information after registers have been set */ + polarity_a = 0x20 | device->pdata->hs_polarity << 5 + | device->pdata->vs_polarity << 2; + error = tvp7002_write(sd, TVP7002_SYNC_CTL_1, polarity_a); + if (error < 0) + return error; + + polarity_b = 0x01 | device->pdata->fid_polarity << 2 + | device->pdata->sog_polarity << 1 + | device->pdata->clk_polarity; + error = tvp7002_write(sd, TVP7002_MISC_CTL_3, polarity_b); + if (error < 0) + return error; + + /* Set registers according to default video mode */ + timings = device->current_timings->timings; + error = tvp7002_s_dv_timings(sd, &timings); + + v4l2_ctrl_handler_init(&device->hdl, 1); + v4l2_ctrl_new_std(&device->hdl, &tvp7002_ctrl_ops, + V4L2_CID_GAIN, 0, 255, 1, 0); + sd->ctrl_handler = &device->hdl; + if (device->hdl.error) { + int err = device->hdl.error; + + v4l2_ctrl_handler_free(&device->hdl); + return err; + } + v4l2_ctrl_handler_setup(&device->hdl); + + return 0; +} + +/* + * tvp7002_remove - Remove TVP7002 device support + * @c: ptr to i2c_client struct + * + * Reset the TVP7002 device + * Returns zero. + */ +static int tvp7002_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + struct tvp7002 *device = to_tvp7002(sd); + + v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter" + "on address 0x%x\n", c->addr); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&device->hdl); + return 0; +} + +/* I2C Device ID table */ +static const struct i2c_device_id tvp7002_id[] = { + { "tvp7002", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tvp7002_id); + +/* I2C driver data */ +static struct i2c_driver tvp7002_driver = { + .driver = { + .owner = THIS_MODULE, + .name = TVP7002_MODULE_NAME, + }, + .probe = tvp7002_probe, + .remove = tvp7002_remove, + .id_table = tvp7002_id, +}; + +module_i2c_driver(tvp7002_driver); diff --git a/drivers/media/i2c/tvp7002_reg.h b/drivers/media/i2c/tvp7002_reg.h new file mode 100644 index 00000000..0e34ca9b --- /dev/null +++ b/drivers/media/i2c/tvp7002_reg.h @@ -0,0 +1,150 @@ +/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics + * Digitizer with Horizontal PLL registers + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Santiago Nunez-Corrales + * + * This code is partially based upon the TVP5150 driver + * written by Mauro Carvalho Chehab (mchehab@infradead.org), + * the TVP514x driver written by Vaibhav Hiremath + * and the TVP7002 driver in the TI LSP 2.10.00.14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Naming conventions + * ------------------ + * + * FDBK: Feedback + * DIV: Divider + * CTL: Control + * SEL: Select + * IN: Input + * OUT: Output + * R: Red + * G: Green + * B: Blue + * OFF: Offset + * THRS: Threshold + * DGTL: Digital + * LVL: Level + * PWR: Power + * MVIS: Macrovision + * W: Width + * H: Height + * ALGN: Alignment + * CLK: Clocks + * TOL: Tolerance + * BWTH: Bandwidth + * COEF: Coefficient + * STAT: Status + * AUTO: Automatic + * FLD: Field + * L: Line + */ + +#define TVP7002_CHIP_REV 0x00 +#define TVP7002_HPLL_FDBK_DIV_MSBS 0x01 +#define TVP7002_HPLL_FDBK_DIV_LSBS 0x02 +#define TVP7002_HPLL_CRTL 0x03 +#define TVP7002_HPLL_PHASE_SEL 0x04 +#define TVP7002_CLAMP_START 0x05 +#define TVP7002_CLAMP_W 0x06 +#define TVP7002_HSYNC_OUT_W 0x07 +#define TVP7002_B_FINE_GAIN 0x08 +#define TVP7002_G_FINE_GAIN 0x09 +#define TVP7002_R_FINE_GAIN 0x0a +#define TVP7002_B_FINE_OFF_MSBS 0x0b +#define TVP7002_G_FINE_OFF_MSBS 0x0c +#define TVP7002_R_FINE_OFF_MSBS 0x0d +#define TVP7002_SYNC_CTL_1 0x0e +#define TVP7002_HPLL_AND_CLAMP_CTL 0x0f +#define TVP7002_SYNC_ON_G_THRS 0x10 +#define TVP7002_SYNC_SEPARATOR_THRS 0x11 +#define TVP7002_HPLL_PRE_COAST 0x12 +#define TVP7002_HPLL_POST_COAST 0x13 +#define TVP7002_SYNC_DETECT_STAT 0x14 +#define TVP7002_OUT_FORMATTER 0x15 +#define TVP7002_MISC_CTL_1 0x16 +#define TVP7002_MISC_CTL_2 0x17 +#define TVP7002_MISC_CTL_3 0x18 +#define TVP7002_IN_MUX_SEL_1 0x19 +#define TVP7002_IN_MUX_SEL_2 0x1a +#define TVP7002_B_AND_G_COARSE_GAIN 0x1b +#define TVP7002_R_COARSE_GAIN 0x1c +#define TVP7002_FINE_OFF_LSBS 0x1d +#define TVP7002_B_COARSE_OFF 0x1e +#define TVP7002_G_COARSE_OFF 0x1f +#define TVP7002_R_COARSE_OFF 0x20 +#define TVP7002_HSOUT_OUT_START 0x21 +#define TVP7002_MISC_CTL_4 0x22 +#define TVP7002_B_DGTL_ALC_OUT_LSBS 0x23 +#define TVP7002_G_DGTL_ALC_OUT_LSBS 0x24 +#define TVP7002_R_DGTL_ALC_OUT_LSBS 0x25 +#define TVP7002_AUTO_LVL_CTL_ENABLE 0x26 +#define TVP7002_DGTL_ALC_OUT_MSBS 0x27 +#define TVP7002_AUTO_LVL_CTL_FILTER 0x28 +/* Reserved 0x29*/ +#define TVP7002_FINE_CLAMP_CTL 0x2a +#define TVP7002_PWR_CTL 0x2b +#define TVP7002_ADC_SETUP 0x2c +#define TVP7002_COARSE_CLAMP_CTL 0x2d +#define TVP7002_SOG_CLAMP 0x2e +#define TVP7002_RGB_COARSE_CLAMP_CTL 0x2f +#define TVP7002_SOG_COARSE_CLAMP_CTL 0x30 +#define TVP7002_ALC_PLACEMENT 0x31 +/* Reserved 0x32 */ +/* Reserved 0x33 */ +#define TVP7002_MVIS_STRIPPER_W 0x34 +#define TVP7002_VSYNC_ALGN 0x35 +#define TVP7002_SYNC_BYPASS 0x36 +#define TVP7002_L_FRAME_STAT_LSBS 0x37 +#define TVP7002_L_FRAME_STAT_MSBS 0x38 +#define TVP7002_CLK_L_STAT_LSBS 0x39 +#define TVP7002_CLK_L_STAT_MSBS 0x3a +#define TVP7002_HSYNC_W 0x3b +#define TVP7002_VSYNC_W 0x3c +#define TVP7002_L_LENGTH_TOL 0x3d +/* Reserved 0x3e */ +#define TVP7002_VIDEO_BWTH_CTL 0x3f +#define TVP7002_AVID_START_PIXEL_LSBS 0x40 +#define TVP7002_AVID_START_PIXEL_MSBS 0x41 +#define TVP7002_AVID_STOP_PIXEL_LSBS 0x42 +#define TVP7002_AVID_STOP_PIXEL_MSBS 0x43 +#define TVP7002_VBLK_F_0_START_L_OFF 0x44 +#define TVP7002_VBLK_F_1_START_L_OFF 0x45 +#define TVP7002_VBLK_F_0_DURATION 0x46 +#define TVP7002_VBLK_F_1_DURATION 0x47 +#define TVP7002_FBIT_F_0_START_L_OFF 0x48 +#define TVP7002_FBIT_F_1_START_L_OFF 0x49 +#define TVP7002_YUV_Y_G_COEF_LSBS 0x4a +#define TVP7002_YUV_Y_G_COEF_MSBS 0x4b +#define TVP7002_YUV_Y_B_COEF_LSBS 0x4c +#define TVP7002_YUV_Y_B_COEF_MSBS 0x4d +#define TVP7002_YUV_Y_R_COEF_LSBS 0x4e +#define TVP7002_YUV_Y_R_COEF_MSBS 0x4f +#define TVP7002_YUV_U_G_COEF_LSBS 0x50 +#define TVP7002_YUV_U_G_COEF_MSBS 0x51 +#define TVP7002_YUV_U_B_COEF_LSBS 0x52 +#define TVP7002_YUV_U_B_COEF_MSBS 0x53 +#define TVP7002_YUV_U_R_COEF_LSBS 0x54 +#define TVP7002_YUV_U_R_COEF_MSBS 0x55 +#define TVP7002_YUV_V_G_COEF_LSBS 0x56 +#define TVP7002_YUV_V_G_COEF_MSBS 0x57 +#define TVP7002_YUV_V_B_COEF_LSBS 0x58 +#define TVP7002_YUV_V_B_COEF_MSBS 0x59 +#define TVP7002_YUV_V_R_COEF_LSBS 0x5a +#define TVP7002_YUV_V_R_COEF_MSBS 0x5b + diff --git a/drivers/media/i2c/tw2804.c b/drivers/media/i2c/tw2804.c new file mode 100644 index 00000000..c5dc2c3b --- /dev/null +++ b/drivers/media/i2c/tw2804.c @@ -0,0 +1,453 @@ +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TW2804_REG_AUTOGAIN 0x02 +#define TW2804_REG_HUE 0x0f +#define TW2804_REG_SATURATION 0x10 +#define TW2804_REG_CONTRAST 0x11 +#define TW2804_REG_BRIGHTNESS 0x12 +#define TW2804_REG_COLOR_KILLER 0x14 +#define TW2804_REG_GAIN 0x3c +#define TW2804_REG_CHROMA_GAIN 0x3d +#define TW2804_REG_BLUE_BALANCE 0x3e +#define TW2804_REG_RED_BALANCE 0x3f + +struct tw2804 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + u8 channel:2; + u8 input:1; + int norm; +}; + +static const u8 global_registers[] = { + 0x39, 0x00, + 0x3a, 0xff, + 0x3b, 0x84, + 0x3c, 0x80, + 0x3d, 0x80, + 0x3e, 0x82, + 0x3f, 0x82, + 0x78, 0x00, + 0xff, 0xff, /* Terminator (reg 0xff does not exist) */ +}; + +static const u8 channel_registers[] = { + 0x01, 0xc4, + 0x02, 0xa5, + 0x03, 0x20, + 0x04, 0xd0, + 0x05, 0x20, + 0x06, 0xd0, + 0x07, 0x88, + 0x08, 0x20, + 0x09, 0x07, + 0x0a, 0xf0, + 0x0b, 0x07, + 0x0c, 0xf0, + 0x0d, 0x40, + 0x0e, 0xd2, + 0x0f, 0x80, + 0x10, 0x80, + 0x11, 0x80, + 0x12, 0x80, + 0x13, 0x1f, + 0x14, 0x00, + 0x15, 0x00, + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0xff, + 0x19, 0xff, + 0x1a, 0xff, + 0x1b, 0xff, + 0x1c, 0xff, + 0x1d, 0xff, + 0x1e, 0xff, + 0x1f, 0xff, + 0x20, 0x07, + 0x21, 0x07, + 0x22, 0x00, + 0x23, 0x91, + 0x24, 0x51, + 0x25, 0x03, + 0x26, 0x00, + 0x27, 0x00, + 0x28, 0x00, + 0x29, 0x00, + 0x2a, 0x00, + 0x2b, 0x00, + 0x2c, 0x00, + 0x2d, 0x00, + 0x2e, 0x00, + 0x2f, 0x00, + 0x30, 0x00, + 0x31, 0x00, + 0x32, 0x00, + 0x33, 0x00, + 0x34, 0x00, + 0x35, 0x00, + 0x36, 0x00, + 0x37, 0x00, + 0xff, 0xff, /* Terminator (reg 0xff does not exist) */ +}; + +static int write_reg(struct i2c_client *client, u8 reg, u8 value, u8 channel) +{ + return i2c_smbus_write_byte_data(client, reg | (channel << 6), value); +} + +static int write_regs(struct i2c_client *client, const u8 *regs, u8 channel) +{ + int ret; + int i; + + for (i = 0; regs[i] != 0xff; i += 2) { + ret = i2c_smbus_write_byte_data(client, + regs[i] | (channel << 6), regs[i + 1]); + if (ret < 0) + return ret; + } + return 0; +} + +static int read_reg(struct i2c_client *client, u8 reg, u8 channel) +{ + return i2c_smbus_read_byte_data(client, (reg) | (channel << 6)); +} + +static inline struct tw2804 *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tw2804, sd); +} + +static inline struct tw2804 *to_state_from_ctrl(struct v4l2_ctrl *ctrl) +{ + return container_of(ctrl->handler, struct tw2804, hdl); +} + +static int tw2804_log_status(struct v4l2_subdev *sd) +{ + struct tw2804 *state = to_state(sd); + + v4l2_info(sd, "Standard: %s\n", + state->norm & V4L2_STD_525_60 ? "60 Hz" : "50 Hz"); + v4l2_info(sd, "Channel: %d\n", state->channel); + v4l2_info(sd, "Input: %d\n", state->input); + return v4l2_ctrl_subdev_log_status(sd); +} + +/* + * These volatile controls are needed because all four channels share + * these controls. So a change made to them through one channel would + * require another channel to be updated. + * + * Normally this would have been done in a different way, but since the one + * board that uses this driver sees this single chip as if it was on four + * different i2c adapters (each adapter belonging to a separate instance of + * the same USB driver) there is no reliable method that I have found to let + * the instances know about each other. + * + * So implementing these global registers as volatile is the best we can do. + */ +static int tw2804_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct tw2804 *state = to_state_from_ctrl(ctrl); + struct i2c_client *client = v4l2_get_subdevdata(&state->sd); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->val = read_reg(client, TW2804_REG_GAIN, 0); + return 0; + + case V4L2_CID_CHROMA_GAIN: + ctrl->val = read_reg(client, TW2804_REG_CHROMA_GAIN, 0); + return 0; + + case V4L2_CID_BLUE_BALANCE: + ctrl->val = read_reg(client, TW2804_REG_BLUE_BALANCE, 0); + return 0; + + case V4L2_CID_RED_BALANCE: + ctrl->val = read_reg(client, TW2804_REG_RED_BALANCE, 0); + return 0; + } + return 0; +} + +static int tw2804_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct tw2804 *state = to_state_from_ctrl(ctrl); + struct i2c_client *client = v4l2_get_subdevdata(&state->sd); + int addr; + int reg; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + addr = TW2804_REG_AUTOGAIN; + reg = read_reg(client, addr, state->channel); + if (reg < 0) + return reg; + if (ctrl->val == 0) + reg &= ~(1 << 7); + else + reg |= 1 << 7; + return write_reg(client, addr, reg, state->channel); + + case V4L2_CID_COLOR_KILLER: + addr = TW2804_REG_COLOR_KILLER; + reg = read_reg(client, addr, state->channel); + if (reg < 0) + return reg; + reg = (reg & ~(0x03)) | (ctrl->val == 0 ? 0x02 : 0x03); + return write_reg(client, addr, reg, state->channel); + + case V4L2_CID_GAIN: + return write_reg(client, TW2804_REG_GAIN, ctrl->val, 0); + + case V4L2_CID_CHROMA_GAIN: + return write_reg(client, TW2804_REG_CHROMA_GAIN, ctrl->val, 0); + + case V4L2_CID_BLUE_BALANCE: + return write_reg(client, TW2804_REG_BLUE_BALANCE, ctrl->val, 0); + + case V4L2_CID_RED_BALANCE: + return write_reg(client, TW2804_REG_RED_BALANCE, ctrl->val, 0); + + case V4L2_CID_BRIGHTNESS: + return write_reg(client, TW2804_REG_BRIGHTNESS, + ctrl->val, state->channel); + + case V4L2_CID_CONTRAST: + return write_reg(client, TW2804_REG_CONTRAST, + ctrl->val, state->channel); + + case V4L2_CID_SATURATION: + return write_reg(client, TW2804_REG_SATURATION, + ctrl->val, state->channel); + + case V4L2_CID_HUE: + return write_reg(client, TW2804_REG_HUE, + ctrl->val, state->channel); + + default: + break; + } + return -EINVAL; +} + +static int tw2804_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct tw2804 *dec = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + bool is_60hz = norm & V4L2_STD_525_60; + u8 regs[] = { + 0x01, is_60hz ? 0xc4 : 0x84, + 0x09, is_60hz ? 0x07 : 0x04, + 0x0a, is_60hz ? 0xf0 : 0x20, + 0x0b, is_60hz ? 0x07 : 0x04, + 0x0c, is_60hz ? 0xf0 : 0x20, + 0x0d, is_60hz ? 0x40 : 0x4a, + 0x16, is_60hz ? 0x00 : 0x40, + 0x17, is_60hz ? 0x00 : 0x40, + 0x20, is_60hz ? 0x07 : 0x0f, + 0x21, is_60hz ? 0x07 : 0x0f, + 0xff, 0xff, + }; + + write_regs(client, regs, dec->channel); + dec->norm = norm; + return 0; +} + +static int tw2804_s_video_routing(struct v4l2_subdev *sd, u32 input, u32 output, + u32 config) +{ + struct tw2804 *dec = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int reg; + + if (config && config - 1 != dec->channel) { + if (config > 4) { + dev_err(&client->dev, + "channel %d is not between 1 and 4!\n", config); + return -EINVAL; + } + dec->channel = config - 1; + dev_dbg(&client->dev, "initializing TW2804 channel %d\n", + dec->channel); + if (dec->channel == 0 && + write_regs(client, global_registers, 0) < 0) { + dev_err(&client->dev, + "error initializing TW2804 global registers\n"); + return -EIO; + } + if (write_regs(client, channel_registers, dec->channel) < 0) { + dev_err(&client->dev, + "error initializing TW2804 channel %d\n", + dec->channel); + return -EIO; + } + } + + if (input > 1) + return -EINVAL; + + if (input == dec->input) + return 0; + + reg = read_reg(client, 0x22, dec->channel); + + if (reg >= 0) { + if (input == 0) + reg &= ~(1 << 2); + else + reg |= 1 << 2; + reg = write_reg(client, 0x22, reg, dec->channel); + } + + if (reg >= 0) + dec->input = input; + else + return reg; + return 0; +} + +static const struct v4l2_ctrl_ops tw2804_ctrl_ops = { + .g_volatile_ctrl = tw2804_g_volatile_ctrl, + .s_ctrl = tw2804_s_ctrl, +}; + +static const struct v4l2_subdev_video_ops tw2804_video_ops = { + .s_routing = tw2804_s_video_routing, +}; + +static const struct v4l2_subdev_core_ops tw2804_core_ops = { + .log_status = tw2804_log_status, + .s_std = tw2804_s_std, +}; + +static const struct v4l2_subdev_ops tw2804_ops = { + .core = &tw2804_core_ops, + .video = &tw2804_video_ops, +}; + +static int tw2804_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct tw2804 *state; + struct v4l2_subdev *sd; + struct v4l2_ctrl *ctrl; + int err; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + state = kzalloc(sizeof(struct tw2804), GFP_KERNEL); + + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &tw2804_ops); + state->channel = -1; + state->norm = V4L2_STD_NTSC; + + v4l2_ctrl_handler_init(&state->hdl, 10); + v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_HUE, 0, 255, 1, 128); + v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_COLOR_KILLER, 0, 1, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 0); + ctrl = v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_GAIN, 0, 255, 1, 128); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + ctrl = v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_CHROMA_GAIN, 0, 255, 1, 128); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + ctrl = v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_BLUE_BALANCE, 0, 255, 1, 122); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + ctrl = v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops, + V4L2_CID_RED_BALANCE, 0, 255, 1, 122); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + sd->ctrl_handler = &state->hdl; + err = state->hdl.error; + if (err) { + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + return 0; +} + +static int tw2804_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tw2804 *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +static const struct i2c_device_id tw2804_id[] = { + { "tw2804", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tw2804_id); + +static struct i2c_driver tw2804_driver = { + .driver = { + .name = "tw2804", + }, + .probe = tw2804_probe, + .remove = tw2804_remove, + .id_table = tw2804_id, +}; + +module_i2c_driver(tw2804_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TW2804/TW2802 V4L2 i2c driver"); +MODULE_AUTHOR("Micronas USA Inc"); diff --git a/drivers/media/i2c/tw9903.c b/drivers/media/i2c/tw9903.c new file mode 100644 index 00000000..87880b19 --- /dev/null +++ b/drivers/media/i2c/tw9903.c @@ -0,0 +1,279 @@ +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("TW9903 I2C subdev driver"); +MODULE_LICENSE("GPL v2"); + +/* + * This driver is based on the wis-tw9903.c source that was in + * drivers/staging/media/go7007. That source had commented out code for + * saturation and scaling (neither seemed to work). If anyone ever gets + * hardware to test this driver, then that code might be useful to look at. + * You need to get the kernel sources of, say, kernel 3.8 where that + * wis-tw9903 driver is still present. + */ + +struct tw9903 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + v4l2_std_id norm; +}; + +static inline struct tw9903 *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tw9903, sd); +} + +static const u8 initial_registers[] = { + 0x02, 0x44, /* input 1, composite */ + 0x03, 0x92, /* correct digital format */ + 0x04, 0x00, + 0x05, 0x80, /* or 0x00 for PAL */ + 0x06, 0x40, /* second internal current reference */ + 0x07, 0x02, /* window */ + 0x08, 0x14, /* window */ + 0x09, 0xf0, /* window */ + 0x0a, 0x81, /* window */ + 0x0b, 0xd0, /* window */ + 0x0c, 0x8c, + 0x0d, 0x00, /* scaling */ + 0x0e, 0x11, /* scaling */ + 0x0f, 0x00, /* scaling */ + 0x10, 0x00, /* brightness */ + 0x11, 0x60, /* contrast */ + 0x12, 0x01, /* sharpness */ + 0x13, 0x7f, /* U gain */ + 0x14, 0x5a, /* V gain */ + 0x15, 0x00, /* hue */ + 0x16, 0xc3, /* sharpness */ + 0x18, 0x00, + 0x19, 0x58, /* vbi */ + 0x1a, 0x80, + 0x1c, 0x0f, /* video norm */ + 0x1d, 0x7f, /* video norm */ + 0x20, 0xa0, /* clamping gain (working 0x50) */ + 0x21, 0x22, + 0x22, 0xf0, + 0x23, 0xfe, + 0x24, 0x3c, + 0x25, 0x38, + 0x26, 0x44, + 0x27, 0x20, + 0x28, 0x00, + 0x29, 0x15, + 0x2a, 0xa0, + 0x2b, 0x44, + 0x2c, 0x37, + 0x2d, 0x00, + 0x2e, 0xa5, /* burst PLL control (working: a9) */ + 0x2f, 0xe0, /* 0xea is blue test frame -- 0xe0 for normal */ + 0x31, 0x00, + 0x33, 0x22, + 0x34, 0x11, + 0x35, 0x35, + 0x3b, 0x05, + 0x06, 0xc0, /* reset device */ + 0x00, 0x00, /* Terminator (reg 0x00 is read-only) */ +}; + +static int write_reg(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int write_regs(struct v4l2_subdev *sd, const u8 *regs) +{ + int i; + + for (i = 0; regs[i] != 0x00; i += 2) + if (write_reg(sd, regs[i], regs[i + 1]) < 0) + return -1; + return 0; +} + +static int tw9903_s_video_routing(struct v4l2_subdev *sd, u32 input, + u32 output, u32 config) +{ + write_reg(sd, 0x02, 0x40 | (input << 1)); + return 0; +} + +static int tw9903_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct tw9903 *dec = to_state(sd); + bool is_60hz = norm & V4L2_STD_525_60; + static const u8 config_60hz[] = { + 0x05, 0x80, + 0x07, 0x02, + 0x08, 0x14, + 0x09, 0xf0, + 0, 0, + }; + static const u8 config_50hz[] = { + 0x05, 0x00, + 0x07, 0x12, + 0x08, 0x18, + 0x09, 0x20, + 0, 0, + }; + + write_regs(sd, is_60hz ? config_60hz : config_50hz); + dec->norm = norm; + return 0; +} + + +static int tw9903_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct tw9903 *dec = container_of(ctrl->handler, struct tw9903, hdl); + struct v4l2_subdev *sd = &dec->sd; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + write_reg(sd, 0x10, ctrl->val); + break; + case V4L2_CID_CONTRAST: + write_reg(sd, 0x11, ctrl->val); + break; + case V4L2_CID_HUE: + write_reg(sd, 0x15, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +static int tw9903_log_status(struct v4l2_subdev *sd) +{ + struct tw9903 *dec = to_state(sd); + bool is_60hz = dec->norm & V4L2_STD_525_60; + + v4l2_info(sd, "Standard: %d Hz\n", is_60hz ? 60 : 50); + v4l2_ctrl_subdev_log_status(sd); + return 0; +} + +/* --------------------------------------------------------------------------*/ + +static const struct v4l2_ctrl_ops tw9903_ctrl_ops = { + .s_ctrl = tw9903_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tw9903_core_ops = { + .log_status = tw9903_log_status, + .s_std = tw9903_s_std, +}; + +static const struct v4l2_subdev_video_ops tw9903_video_ops = { + .s_routing = tw9903_s_video_routing, +}; + +static const struct v4l2_subdev_ops tw9903_ops = { + .core = &tw9903_core_ops, + .video = &tw9903_video_ops, +}; + +/* --------------------------------------------------------------------------*/ + +static int tw9903_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tw9903 *dec; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + dec = kzalloc(sizeof(struct tw9903), GFP_KERNEL); + if (dec == NULL) + return -ENOMEM; + sd = &dec->sd; + v4l2_i2c_subdev_init(sd, client, &tw9903_ops); + hdl = &dec->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 0x60); + v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(dec); + return err; + } + + /* Initialize tw9903 */ + dec->norm = V4L2_STD_NTSC; + + if (write_regs(sd, initial_registers) < 0) { + v4l2_err(client, "error initializing TW9903\n"); + kfree(dec); + return -EINVAL; + } + + return 0; +} + +static int tw9903_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&to_state(sd)->hdl); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id tw9903_id[] = { + { "tw9903", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tw9903_id); + +static struct i2c_driver tw9903_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tw9903", + }, + .probe = tw9903_probe, + .remove = tw9903_remove, + .id_table = tw9903_id, +}; +module_i2c_driver(tw9903_driver); diff --git a/drivers/media/i2c/tw9906.c b/drivers/media/i2c/tw9906.c new file mode 100644 index 00000000..accd79e5 --- /dev/null +++ b/drivers/media/i2c/tw9906.c @@ -0,0 +1,247 @@ +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("TW9906 I2C subdev driver"); +MODULE_LICENSE("GPL v2"); + +struct tw9906 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + v4l2_std_id norm; +}; + +static inline struct tw9906 *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tw9906, sd); +} + +static const u8 initial_registers[] = { + 0x02, 0x40, /* input 0, composite */ + 0x03, 0xa2, /* correct digital format */ + 0x05, 0x81, /* or 0x01 for PAL */ + 0x07, 0x02, /* window */ + 0x08, 0x14, /* window */ + 0x09, 0xf0, /* window */ + 0x0a, 0x10, /* window */ + 0x0b, 0xd0, /* window */ + 0x0d, 0x00, /* scaling */ + 0x0e, 0x11, /* scaling */ + 0x0f, 0x00, /* scaling */ + 0x10, 0x00, /* brightness */ + 0x11, 0x60, /* contrast */ + 0x12, 0x11, /* sharpness */ + 0x13, 0x7e, /* U gain */ + 0x14, 0x7e, /* V gain */ + 0x15, 0x00, /* hue */ + 0x19, 0x57, /* vbi */ + 0x1a, 0x0f, + 0x1b, 0x40, + 0x29, 0x03, + 0x55, 0x00, + 0x6b, 0x26, + 0x6c, 0x36, + 0x6d, 0xf0, + 0x6e, 0x41, + 0x6f, 0x13, + 0xad, 0x70, + 0x00, 0x00, /* Terminator (reg 0x00 is read-only) */ +}; + +static int write_reg(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int write_regs(struct v4l2_subdev *sd, const u8 *regs) +{ + int i; + + for (i = 0; regs[i] != 0x00; i += 2) + if (write_reg(sd, regs[i], regs[i + 1]) < 0) + return -1; + return 0; +} + +static int tw9906_s_video_routing(struct v4l2_subdev *sd, u32 input, + u32 output, u32 config) +{ + write_reg(sd, 0x02, 0x40 | (input << 1)); + return 0; +} + +static int tw9906_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct tw9906 *dec = to_state(sd); + bool is_60hz = norm & V4L2_STD_525_60; + static const u8 config_60hz[] = { + 0x05, 0x81, + 0x07, 0x02, + 0x08, 0x14, + 0x09, 0xf0, + 0, 0, + }; + static const u8 config_50hz[] = { + 0x05, 0x01, + 0x07, 0x12, + 0x08, 0x18, + 0x09, 0x20, + 0, 0, + }; + + write_regs(sd, is_60hz ? config_60hz : config_50hz); + dec->norm = norm; + return 0; +} + +static int tw9906_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct tw9906 *dec = container_of(ctrl->handler, struct tw9906, hdl); + struct v4l2_subdev *sd = &dec->sd; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + write_reg(sd, 0x10, ctrl->val); + break; + case V4L2_CID_CONTRAST: + write_reg(sd, 0x11, ctrl->val); + break; + case V4L2_CID_HUE: + write_reg(sd, 0x15, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +static int tw9906_log_status(struct v4l2_subdev *sd) +{ + struct tw9906 *dec = to_state(sd); + bool is_60hz = dec->norm & V4L2_STD_525_60; + + v4l2_info(sd, "Standard: %d Hz\n", is_60hz ? 60 : 50); + v4l2_ctrl_subdev_log_status(sd); + return 0; +} + +/* --------------------------------------------------------------------------*/ + +static const struct v4l2_ctrl_ops tw9906_ctrl_ops = { + .s_ctrl = tw9906_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tw9906_core_ops = { + .log_status = tw9906_log_status, + .s_std = tw9906_s_std, +}; + +static const struct v4l2_subdev_video_ops tw9906_video_ops = { + .s_routing = tw9906_s_video_routing, +}; + +static const struct v4l2_subdev_ops tw9906_ops = { + .core = &tw9906_core_ops, + .video = &tw9906_video_ops, +}; + +static int tw9906_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tw9906 *dec; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + dec = kzalloc(sizeof(struct tw9906), GFP_KERNEL); + if (dec == NULL) + return -ENOMEM; + sd = &dec->sd; + v4l2_i2c_subdev_init(sd, client, &tw9906_ops); + hdl = &dec->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &tw9906_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &tw9906_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 0x60); + v4l2_ctrl_new_std(hdl, &tw9906_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(dec); + return err; + } + + /* Initialize tw9906 */ + dec->norm = V4L2_STD_NTSC; + + if (write_regs(sd, initial_registers) < 0) { + v4l2_err(client, "error initializing TW9906\n"); + kfree(dec); + return -EINVAL; + } + + return 0; +} + +static int tw9906_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&to_state(sd)->hdl); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id tw9906_id[] = { + { "tw9906", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tw9906_id); + +static struct i2c_driver tw9906_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tw9906", + }, + .probe = tw9906_probe, + .remove = tw9906_remove, + .id_table = tw9906_id, +}; +module_i2c_driver(tw9906_driver); diff --git a/drivers/media/i2c/uda1342.c b/drivers/media/i2c/uda1342.c new file mode 100644 index 00000000..3af40855 --- /dev/null +++ b/drivers/media/i2c/uda1342.c @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +static int write_reg(struct i2c_client *client, int reg, int value) +{ + /* UDA1342 wants MSB first, but SMBus sends LSB first */ + i2c_smbus_write_word_data(client, reg, swab16(value)); + return 0; +} + +static int uda1342_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + switch (input) { + case UDA1342_IN1: + write_reg(client, 0x00, 0x1241); /* select input 1 */ + break; + case UDA1342_IN2: + write_reg(client, 0x00, 0x1441); /* select input 2 */ + break; + default: + v4l2_err(sd, "input %d not supported\n", input); + break; + } + return 0; +} + +static const struct v4l2_subdev_audio_ops uda1342_audio_ops = { + .s_routing = uda1342_s_routing, +}; + +static const struct v4l2_subdev_ops uda1342_ops = { + .audio = &uda1342_audio_ops, +}; + +static int uda1342_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct v4l2_subdev *sd; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + dev_dbg(&client->dev, "initializing UDA1342 at address %d on %s\n", + client->addr, adapter->name); + + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + + v4l2_i2c_subdev_init(sd, client, &uda1342_ops); + + write_reg(client, 0x00, 0x8000); /* reset registers */ + write_reg(client, 0x00, 0x1241); /* select input 1 */ + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + return 0; +} + +static int uda1342_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + return 0; +} + +static const struct i2c_device_id uda1342_id[] = { + { "uda1342", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, uda1342_id); + +static struct i2c_driver uda1342_driver = { + .driver = { + .name = "uda1342", + }, + .probe = uda1342_probe, + .remove = uda1342_remove, + .id_table = uda1342_id, +}; + +module_i2c_driver(uda1342_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/upd64031a.c b/drivers/media/i2c/upd64031a.c new file mode 100644 index 00000000..f0a09214 --- /dev/null +++ b/drivers/media/i2c/upd64031a.c @@ -0,0 +1,274 @@ +/* + * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan + * + * 2003 by T.Adachi + * 2003 by Takeru KOMORIYA + * 2006 by Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +/* --------------------- read registers functions define -------------------- */ + +/* bit masks */ +#define GR_MODE_MASK 0xc0 +#define DIRECT_3DYCS_CONNECT_MASK 0xc0 +#define SYNC_CIRCUIT_MASK 0xa0 + +/* -------------------------------------------------------------------------- */ + +MODULE_DESCRIPTION("uPD64031A driver"); +MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +enum { + R00 = 0, R01, R02, R03, R04, + R05, R06, R07, R08, R09, + R0A, R0B, R0C, R0D, R0E, R0F, + /* unused registers + R10, R11, R12, R13, R14, + R15, R16, R17, + */ + TOT_REGS +}; + +struct upd64031a_state { + struct v4l2_subdev sd; + u8 regs[TOT_REGS]; + u8 gr_mode; + u8 direct_3dycs_connect; + u8 ext_comp_sync; + u8 ext_vert_sync; +}; + +static inline struct upd64031a_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct upd64031a_state, sd); +} + +static u8 upd64031a_init[] = { + 0x00, 0xb8, 0x48, 0xd2, 0xe6, + 0x03, 0x10, 0x0b, 0xaf, 0x7f, + 0x00, 0x00, 0x1d, 0x5e, 0x00, + 0xd0 +}; + +/* ------------------------------------------------------------------------ */ + +static u8 upd64031a_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + if (reg >= sizeof(buf)) + return 0xff; + i2c_master_recv(client, buf, 2); + return buf[reg]; +} + +/* ------------------------------------------------------------------------ */ + +static void upd64031a_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + v4l2_dbg(1, debug, sd, "write reg: %02X val: %02X\n", reg, val); + if (i2c_master_send(client, buf, 2) != 2) + v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val); +} + +/* ------------------------------------------------------------------------ */ + +/* The input changed due to new input or channel changed */ +static int upd64031a_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *freq) +{ + struct upd64031a_state *state = to_state(sd); + u8 reg = state->regs[R00]; + + v4l2_dbg(1, debug, sd, "changed input or channel\n"); + upd64031a_write(sd, R00, reg | 0x10); + upd64031a_write(sd, R00, reg & ~0x10); + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static int upd64031a_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct upd64031a_state *state = to_state(sd); + u8 r00, r05, r08; + + state->gr_mode = (input & 3) << 6; + state->direct_3dycs_connect = (input & 0xc) << 4; + state->ext_comp_sync = + (input & UPD64031A_COMPOSITE_EXTERNAL) << 1; + state->ext_vert_sync = + (input & UPD64031A_VERTICAL_EXTERNAL) << 2; + r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode; + r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) | + state->ext_comp_sync | state->ext_vert_sync; + r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) | + state->direct_3dycs_connect; + upd64031a_write(sd, R00, r00); + upd64031a_write(sd, R05, r05); + upd64031a_write(sd, R08, r08); + return upd64031a_s_frequency(sd, NULL); +} + +static int upd64031a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_UPD64031A, 0); +} + +static int upd64031a_log_status(struct v4l2_subdev *sd) +{ + v4l2_info(sd, "Status: SA00=0x%02x SA01=0x%02x\n", + upd64031a_read(sd, 0), upd64031a_read(sd, 1)); + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int upd64031a_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = upd64031a_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int upd64031a_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + upd64031a_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops upd64031a_core_ops = { + .log_status = upd64031a_log_status, + .g_chip_ident = upd64031a_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = upd64031a_g_register, + .s_register = upd64031a_s_register, +#endif +}; + +static const struct v4l2_subdev_tuner_ops upd64031a_tuner_ops = { + .s_frequency = upd64031a_s_frequency, +}; + +static const struct v4l2_subdev_video_ops upd64031a_video_ops = { + .s_routing = upd64031a_s_routing, +}; + +static const struct v4l2_subdev_ops upd64031a_ops = { + .core = &upd64031a_core_ops, + .tuner = &upd64031a_tuner_ops, + .video = &upd64031a_video_ops, +}; + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static int upd64031a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct upd64031a_state *state; + struct v4l2_subdev *sd; + int i; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct upd64031a_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &upd64031a_ops); + memcpy(state->regs, upd64031a_init, sizeof(state->regs)); + state->gr_mode = UPD64031A_GR_ON << 6; + state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4; + state->ext_comp_sync = state->ext_vert_sync = 0; + for (i = 0; i < TOT_REGS; i++) + upd64031a_write(sd, i, state->regs[i]); + return 0; +} + +static int upd64031a_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id upd64031a_id[] = { + { "upd64031a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, upd64031a_id); + +static struct i2c_driver upd64031a_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "upd64031a", + }, + .probe = upd64031a_probe, + .remove = upd64031a_remove, + .id_table = upd64031a_id, +}; + +module_i2c_driver(upd64031a_driver); diff --git a/drivers/media/i2c/upd64083.c b/drivers/media/i2c/upd64083.c new file mode 100644 index 00000000..343e0215 --- /dev/null +++ b/drivers/media/i2c/upd64083.c @@ -0,0 +1,246 @@ +/* + * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver + * + * 2003 by T.Adachi (tadachi@tadachi-net.com) + * 2003 by Takeru KOMORIYA + * 2006 by Hans Verkuil + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("uPD64083 driver"); +MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static bool debug; +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +enum { + R00 = 0, R01, R02, R03, R04, + R05, R06, R07, R08, R09, + R0A, R0B, R0C, R0D, R0E, R0F, + R10, R11, R12, R13, R14, + R15, R16, + TOT_REGS +}; + +struct upd64083_state { + struct v4l2_subdev sd; + u8 mode; + u8 ext_y_adc; + u8 regs[TOT_REGS]; +}; + +static inline struct upd64083_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct upd64083_state, sd); +} + +/* Initial values when used in combination with the + NEC upd64031a ghost reduction chip. */ +static u8 upd64083_init[] = { + 0x1f, 0x01, 0xa0, 0x2d, 0x29, /* we use EXCSS=0 */ + 0x36, 0xdd, 0x05, 0x56, 0x48, + 0x00, 0x3a, 0xa0, 0x05, 0x08, + 0x44, 0x60, 0x08, 0x52, 0xf8, + 0x53, 0x60, 0x10 +}; + +/* ------------------------------------------------------------------------ */ + +static void upd64083_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + v4l2_dbg(1, debug, sd, "write reg: %02x val: %02x\n", reg, val); + if (i2c_master_send(client, buf, 2) != 2) + v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val); +} + +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static u8 upd64083_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[7]; + + if (reg >= sizeof(buf)) + return 0xff; + i2c_master_recv(client, buf, sizeof(buf)); + return buf[reg]; +} +#endif + +/* ------------------------------------------------------------------------ */ + +static int upd64083_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct upd64083_state *state = to_state(sd); + u8 r00, r02; + + if (input > 7 || (input & 6) == 6) + return -EINVAL; + state->mode = (input & 3) << 6; + state->ext_y_adc = (input & UPD64083_EXT_Y_ADC) << 3; + r00 = (state->regs[R00] & ~(3 << 6)) | state->mode; + r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc; + upd64083_write(sd, R00, r00); + upd64083_write(sd, R02, r02); + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int upd64083_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = upd64083_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int upd64083_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + upd64083_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int upd64083_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_UPD64083, 0); +} + +static int upd64083_log_status(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[7]; + + i2c_master_recv(client, buf, 7); + v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x " + "SA04=%02x SA05=%02x SA06=%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops upd64083_core_ops = { + .log_status = upd64083_log_status, + .g_chip_ident = upd64083_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = upd64083_g_register, + .s_register = upd64083_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops upd64083_video_ops = { + .s_routing = upd64083_s_routing, +}; + +static const struct v4l2_subdev_ops upd64083_ops = { + .core = &upd64083_core_ops, + .video = &upd64083_video_ops, +}; + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static int upd64083_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct upd64083_state *state; + struct v4l2_subdev *sd; + int i; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct upd64083_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &upd64083_ops); + /* Initially assume that a ghost reduction chip is present */ + state->mode = 0; /* YCS mode */ + state->ext_y_adc = (1 << 5); + memcpy(state->regs, upd64083_init, TOT_REGS); + for (i = 0; i < TOT_REGS; i++) + upd64083_write(sd, i, state->regs[i]); + return 0; +} + +static int upd64083_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id upd64083_id[] = { + { "upd64083", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, upd64083_id); + +static struct i2c_driver upd64083_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "upd64083", + }, + .probe = upd64083_probe, + .remove = upd64083_remove, + .id_table = upd64083_id, +}; + +module_i2c_driver(upd64083_driver); diff --git a/drivers/media/i2c/vp27smpx.c b/drivers/media/i2c/vp27smpx.c new file mode 100644 index 00000000..e71f1396 --- /dev/null +++ b/drivers/media/i2c/vp27smpx.c @@ -0,0 +1,211 @@ +/* + * vp27smpx - driver version 0.0.1 + * + * Copyright (C) 2007 Hans Verkuil + * + * Based on a tvaudio patch from Takahiro Adachi + * and Kazuhiko Kawakami + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("vp27smpx driver"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + + +/* ----------------------------------------------------------------------- */ + +struct vp27smpx_state { + struct v4l2_subdev sd; + int radio; + u32 audmode; +}; + +static inline struct vp27smpx_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vp27smpx_state, sd); +} + +static void vp27smpx_set_audmode(struct v4l2_subdev *sd, u32 audmode) +{ + struct vp27smpx_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 data[3] = { 0x00, 0x00, 0x04 }; + + switch (audmode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + data[1] = 0x01; + break; + case V4L2_TUNER_MODE_LANG2: + data[1] = 0x02; + break; + } + + if (i2c_master_send(client, data, sizeof(data)) != sizeof(data)) + v4l2_err(sd, "I/O error setting audmode\n"); + else + state->audmode = audmode; +} + +static int vp27smpx_s_radio(struct v4l2_subdev *sd) +{ + struct vp27smpx_state *state = to_state(sd); + + state->radio = 1; + return 0; +} + +static int vp27smpx_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct vp27smpx_state *state = to_state(sd); + + state->radio = 0; + return 0; +} + +static int vp27smpx_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct vp27smpx_state *state = to_state(sd); + + if (!state->radio) + vp27smpx_set_audmode(sd, vt->audmode); + return 0; +} + +static int vp27smpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct vp27smpx_state *state = to_state(sd); + + if (state->radio) + return 0; + vt->audmode = state->audmode; + vt->capability = V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + return 0; +} + +static int vp27smpx_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_VP27SMPX, 0); +} + +static int vp27smpx_log_status(struct v4l2_subdev *sd) +{ + struct vp27smpx_state *state = to_state(sd); + + v4l2_info(sd, "Audio Mode: %u%s\n", state->audmode, + state->radio ? " (Radio)" : ""); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops vp27smpx_core_ops = { + .log_status = vp27smpx_log_status, + .g_chip_ident = vp27smpx_g_chip_ident, + .s_std = vp27smpx_s_std, +}; + +static const struct v4l2_subdev_tuner_ops vp27smpx_tuner_ops = { + .s_radio = vp27smpx_s_radio, + .s_tuner = vp27smpx_s_tuner, + .g_tuner = vp27smpx_g_tuner, +}; + +static const struct v4l2_subdev_ops vp27smpx_ops = { + .core = &vp27smpx_core_ops, + .tuner = &vp27smpx_tuner_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static int vp27smpx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vp27smpx_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct vp27smpx_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &vp27smpx_ops); + state->audmode = V4L2_TUNER_MODE_STEREO; + + /* initialize vp27smpx */ + vp27smpx_set_audmode(sd, state->audmode); + return 0; +} + +static int vp27smpx_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id vp27smpx_id[] = { + { "vp27smpx", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vp27smpx_id); + +static struct i2c_driver vp27smpx_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "vp27smpx", + }, + .probe = vp27smpx_probe, + .remove = vp27smpx_remove, + .id_table = vp27smpx_id, +}; + +module_i2c_driver(vp27smpx_driver); diff --git a/drivers/media/i2c/vpx3220.c b/drivers/media/i2c/vpx3220.c new file mode 100644 index 00000000..2f67b4c5 --- /dev/null +++ b/drivers/media/i2c/vpx3220.c @@ -0,0 +1,591 @@ +/* + * vpx3220a, vpx3216b & vpx3214c video decoder driver version 0.0.1 + * + * Copyright (C) 2001 Laurent Pinchart + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); +MODULE_AUTHOR("Laurent Pinchart"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +#define VPX_TIMEOUT_COUNT 10 + +/* ----------------------------------------------------------------------- */ + +struct vpx3220 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + unsigned char reg[255]; + + v4l2_std_id norm; + int ident; + int input; + int enable; +}; + +static inline struct vpx3220 *to_vpx3220(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vpx3220, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct vpx3220, hdl)->sd; +} + +static char *inputs[] = { "internal", "composite", "svideo" }; + +/* ----------------------------------------------------------------------- */ + +static inline int vpx3220_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct vpx3220 *decoder = i2c_get_clientdata(client); + + decoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int vpx3220_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int vpx3220_fp_status(struct v4l2_subdev *sd) +{ + unsigned char status; + unsigned int i; + + for (i = 0; i < VPX_TIMEOUT_COUNT; i++) { + status = vpx3220_read(sd, 0x29); + + if (!(status & 4)) + return 0; + + udelay(10); + + if (need_resched()) + cond_resched(); + } + + return -1; +} + +static int vpx3220_fp_write(struct v4l2_subdev *sd, u8 fpaddr, u16 data) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* Write the 16-bit address to the FPWR register */ + if (i2c_smbus_write_word_data(client, 0x27, swab16(fpaddr)) == -1) { + v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); + return -1; + } + + if (vpx3220_fp_status(sd) < 0) + return -1; + + /* Write the 16-bit data to the FPDAT register */ + if (i2c_smbus_write_word_data(client, 0x28, swab16(data)) == -1) { + v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); + return -1; + } + + return 0; +} + +static u16 vpx3220_fp_read(struct v4l2_subdev *sd, u16 fpaddr) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + s16 data; + + /* Write the 16-bit address to the FPRD register */ + if (i2c_smbus_write_word_data(client, 0x26, swab16(fpaddr)) == -1) { + v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); + return -1; + } + + if (vpx3220_fp_status(sd) < 0) + return -1; + + /* Read the 16-bit data from the FPDAT register */ + data = i2c_smbus_read_word_data(client, 0x28); + if (data == -1) { + v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); + return -1; + } + + return swab16(data); +} + +static int vpx3220_write_block(struct v4l2_subdev *sd, const u8 *data, unsigned int len) +{ + u8 reg; + int ret = -1; + + while (len >= 2) { + reg = *data++; + ret = vpx3220_write(sd, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + + return ret; +} + +static int vpx3220_write_fp_block(struct v4l2_subdev *sd, + const u16 *data, unsigned int len) +{ + u8 reg; + int ret = 0; + + while (len > 1) { + reg = *data++; + ret |= vpx3220_fp_write(sd, reg, *data++); + len -= 2; + } + + return ret; +} + +/* ---------------------------------------------------------------------- */ + +static const unsigned short init_ntsc[] = { + 0x1c, 0x00, /* NTSC tint angle */ + 0x88, 17, /* Window 1 vertical */ + 0x89, 240, /* Vertical lines in */ + 0x8a, 240, /* Vertical lines out */ + 0x8b, 000, /* Horizontal begin */ + 0x8c, 640, /* Horizontal length */ + 0x8d, 640, /* Number of pixels */ + 0x8f, 0xc00, /* Disable window 2 */ + 0xf0, 0x73, /* 13.5 MHz transport, Forced + * mode, latch windows */ + 0xf2, 0x13, /* NTSC M, composite input */ + 0xe7, 0x1e1, /* Enable vertical standard + * locking @ 240 lines */ +}; + +static const unsigned short init_pal[] = { + 0x88, 23, /* Window 1 vertical begin */ + 0x89, 288, /* Vertical lines in (16 lines + * skipped by the VFE) */ + 0x8a, 288, /* Vertical lines out (16 lines + * skipped by the VFE) */ + 0x8b, 16, /* Horizontal begin */ + 0x8c, 768, /* Horizontal length */ + 0x8d, 784, /* Number of pixels + * Must be >= Horizontal begin + Horizontal length */ + 0x8f, 0xc00, /* Disable window 2 */ + 0xf0, 0x77, /* 13.5 MHz transport, Forced + * mode, latch windows */ + 0xf2, 0x3d1, /* PAL B,G,H,I, composite input */ + 0xe7, 0x241, /* PAL/SECAM set to 288 lines */ +}; + +static const unsigned short init_secam[] = { + 0x88, 23, /* Window 1 vertical begin */ + 0x89, 288, /* Vertical lines in (16 lines + * skipped by the VFE) */ + 0x8a, 288, /* Vertical lines out (16 lines + * skipped by the VFE) */ + 0x8b, 16, /* Horizontal begin */ + 0x8c, 768, /* Horizontal length */ + 0x8d, 784, /* Number of pixels + * Must be >= Horizontal begin + Horizontal length */ + 0x8f, 0xc00, /* Disable window 2 */ + 0xf0, 0x77, /* 13.5 MHz transport, Forced + * mode, latch windows */ + 0xf2, 0x3d5, /* SECAM, composite input */ + 0xe7, 0x241, /* PAL/SECAM set to 288 lines */ +}; + +static const unsigned char init_common[] = { + 0xf2, 0x00, /* Disable all outputs */ + 0x33, 0x0d, /* Luma : VIN2, Chroma : CIN + * (clamp off) */ + 0xd8, 0xa8, /* HREF/VREF active high, VREF + * pulse = 2, Odd/Even flag */ + 0x20, 0x03, /* IF compensation 0dB/oct */ + 0xe0, 0xff, /* Open up all comparators */ + 0xe1, 0x00, + 0xe2, 0x7f, + 0xe3, 0x80, + 0xe4, 0x7f, + 0xe5, 0x80, + 0xe6, 0x00, /* Brightness set to 0 */ + 0xe7, 0xe0, /* Contrast to 1.0, noise shaping + * 10 to 8 2-bit error diffusion */ + 0xe8, 0xf8, /* YUV422, CbCr binary offset, + * ... (p.32) */ + 0xea, 0x18, /* LLC2 connected, output FIFO + * reset with VACTintern */ + 0xf0, 0x8a, /* Half full level to 10, bus + * shuffler [7:0, 23:16, 15:8] */ + 0xf1, 0x18, /* Single clock, sync mode, no + * FE delay, no HLEN counter */ + 0xf8, 0x12, /* Port A, PIXCLK, HF# & FE# + * strength to 2 */ + 0xf9, 0x24, /* Port B, HREF, VREF, PREF & + * ALPHA strength to 4 */ +}; + +static const unsigned short init_fp[] = { + 0x59, 0, + 0xa0, 2070, /* ACC reference */ + 0xa3, 0, + 0xa4, 0, + 0xa8, 30, + 0xb2, 768, + 0xbe, 27, + 0x58, 0, + 0x26, 0, + 0x4b, 0x298, /* PLL gain */ +}; + + +static int vpx3220_init(struct v4l2_subdev *sd, u32 val) +{ + struct vpx3220 *decoder = to_vpx3220(sd); + + vpx3220_write_block(sd, init_common, sizeof(init_common)); + vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1); + if (decoder->norm & V4L2_STD_NTSC) + vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1); + else if (decoder->norm & V4L2_STD_PAL) + vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); + else if (decoder->norm & V4L2_STD_SECAM) + vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1); + else + vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); + return 0; +} + +static int vpx3220_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd) +{ + int res = V4L2_IN_ST_NO_SIGNAL, status; + v4l2_std_id std = 0; + + status = vpx3220_fp_read(sd, 0x0f3); + + v4l2_dbg(1, debug, sd, "status: 0x%04x\n", status); + + if (status < 0) + return status; + + if ((status & 0x20) == 0) { + res = 0; + + switch (status & 0x18) { + case 0x00: + case 0x10: + case 0x14: + case 0x18: + std = V4L2_STD_PAL; + break; + + case 0x08: + std = V4L2_STD_SECAM; + break; + + case 0x04: + case 0x0c: + case 0x1c: + std = V4L2_STD_NTSC; + break; + } + } + if (pstd) + *pstd = std; + if (pstatus) + *pstatus = res; + return 0; +} + +static int vpx3220_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + v4l2_dbg(1, debug, sd, "querystd\n"); + return vpx3220_status(sd, NULL, std); +} + +static int vpx3220_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + v4l2_dbg(1, debug, sd, "g_input_status\n"); + return vpx3220_status(sd, status, NULL); +} + +static int vpx3220_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct vpx3220 *decoder = to_vpx3220(sd); + int temp_input; + + /* Here we back up the input selection because it gets + overwritten when we fill the registers with the + chosen video norm */ + temp_input = vpx3220_fp_read(sd, 0xf2); + + v4l2_dbg(1, debug, sd, "s_std %llx\n", (unsigned long long)std); + if (std & V4L2_STD_NTSC) { + vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1); + v4l2_dbg(1, debug, sd, "norm switched to NTSC\n"); + } else if (std & V4L2_STD_PAL) { + vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); + v4l2_dbg(1, debug, sd, "norm switched to PAL\n"); + } else if (std & V4L2_STD_SECAM) { + vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1); + v4l2_dbg(1, debug, sd, "norm switched to SECAM\n"); + } else { + return -EINVAL; + } + + decoder->norm = std; + + /* And here we set the backed up video input again */ + vpx3220_fp_write(sd, 0xf2, temp_input | 0x0010); + udelay(10); + return 0; +} + +static int vpx3220_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + int data; + + /* RJ: input = 0: ST8 (PCTV) input + input = 1: COMPOSITE input + input = 2: SVHS input */ + + const int input_vals[3][2] = { + {0x0c, 0}, + {0x0d, 0}, + {0x0e, 1} + }; + + if (input > 2) + return -EINVAL; + + v4l2_dbg(1, debug, sd, "input switched to %s\n", inputs[input]); + + vpx3220_write(sd, 0x33, input_vals[input][0]); + + data = vpx3220_fp_read(sd, 0xf2) & ~(0x0020); + if (data < 0) + return data; + /* 0x0010 is required to latch the setting */ + vpx3220_fp_write(sd, 0xf2, + data | (input_vals[input][1] << 5) | 0x0010); + + udelay(10); + return 0; +} + +static int vpx3220_s_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "s_stream %s\n", enable ? "on" : "off"); + + vpx3220_write(sd, 0xf2, (enable ? 0x1b : 0x00)); + return 0; +} + +static int vpx3220_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + vpx3220_write(sd, 0xe6, ctrl->val); + return 0; + case V4L2_CID_CONTRAST: + /* Bit 7 and 8 is for noise shaping */ + vpx3220_write(sd, 0xe7, ctrl->val + 192); + return 0; + case V4L2_CID_SATURATION: + vpx3220_fp_write(sd, 0xa0, ctrl->val); + return 0; + case V4L2_CID_HUE: + vpx3220_fp_write(sd, 0x1c, ctrl->val); + return 0; + } + return -EINVAL; +} + +static int vpx3220_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct vpx3220 *decoder = to_vpx3220(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, decoder->ident, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops vpx3220_ctrl_ops = { + .s_ctrl = vpx3220_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops vpx3220_core_ops = { + .g_chip_ident = vpx3220_g_chip_ident, + .init = vpx3220_init, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = vpx3220_s_std, +}; + +static const struct v4l2_subdev_video_ops vpx3220_video_ops = { + .s_routing = vpx3220_s_routing, + .s_stream = vpx3220_s_stream, + .querystd = vpx3220_querystd, + .g_input_status = vpx3220_g_input_status, +}; + +static const struct v4l2_subdev_ops vpx3220_ops = { + .core = &vpx3220_core_ops, + .video = &vpx3220_video_ops, +}; + +/* ----------------------------------------------------------------------- + * Client management code + */ + +static int vpx3220_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vpx3220 *decoder; + struct v4l2_subdev *sd; + const char *name = NULL; + u8 ver; + u16 pn; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + decoder = kzalloc(sizeof(struct vpx3220), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &vpx3220_ops); + decoder->norm = V4L2_STD_PAL; + decoder->input = 0; + decoder->enable = 1; + v4l2_ctrl_handler_init(&decoder->hdl, 4); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_CONTRAST, 0, 63, 1, 32); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_SATURATION, 0, 4095, 1, 2048); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_HUE, -512, 511, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + + ver = i2c_smbus_read_byte_data(client, 0x00); + pn = (i2c_smbus_read_byte_data(client, 0x02) << 8) + + i2c_smbus_read_byte_data(client, 0x01); + decoder->ident = V4L2_IDENT_VPX3220A; + if (ver == 0xec) { + switch (pn) { + case 0x4680: + name = "vpx3220a"; + break; + case 0x4260: + name = "vpx3216b"; + decoder->ident = V4L2_IDENT_VPX3216B; + break; + case 0x4280: + name = "vpx3214c"; + decoder->ident = V4L2_IDENT_VPX3214C; + break; + } + } + if (name) + v4l2_info(sd, "%s found @ 0x%x (%s)\n", name, + client->addr << 1, client->adapter->name); + else + v4l2_info(sd, "chip (%02x:%04x) found @ 0x%x (%s)\n", + ver, pn, client->addr << 1, client->adapter->name); + + vpx3220_write_block(sd, init_common, sizeof(init_common)); + vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1); + /* Default to PAL */ + vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); + return 0; +} + +static int vpx3220_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vpx3220 *decoder = to_vpx3220(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return 0; +} + +static const struct i2c_device_id vpx3220_id[] = { + { "vpx3220a", 0 }, + { "vpx3216b", 0 }, + { "vpx3214c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vpx3220_id); + +static struct i2c_driver vpx3220_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "vpx3220", + }, + .probe = vpx3220_probe, + .remove = vpx3220_remove, + .id_table = vpx3220_id, +}; + +module_i2c_driver(vpx3220_driver); diff --git a/drivers/media/i2c/vs6624.c b/drivers/media/i2c/vs6624.c new file mode 100644 index 00000000..f366fad6 --- /dev/null +++ b/drivers/media/i2c/vs6624.c @@ -0,0 +1,917 @@ +/* + * vs6624.c ST VS6624 CMOS image sensor driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "vs6624_regs.h" + +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define QQVGA_WIDTH 160 +#define QQVGA_HEIGHT 120 +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 +#define QQCIF_WIDTH 88 +#define QQCIF_HEIGHT 72 + +#define MAX_FRAME_RATE 30 + +struct vs6624 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_fract frame_rate; + struct v4l2_mbus_framefmt fmt; + unsigned ce_pin; +}; + +static const struct vs6624_format { + enum v4l2_mbus_pixelcode mbus_code; + enum v4l2_colorspace colorspace; +} vs6624_formats[] = { + { + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + { + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + { + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + }, +}; + +static struct v4l2_mbus_framefmt vs6624_default_fmt = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, +}; + +static const u16 vs6624_p1[] = { + 0x8104, 0x03, + 0x8105, 0x01, + 0xc900, 0x03, + 0xc904, 0x47, + 0xc905, 0x10, + 0xc906, 0x80, + 0xc907, 0x3a, + 0x903a, 0x02, + 0x903b, 0x47, + 0x903c, 0x15, + 0xc908, 0x31, + 0xc909, 0xdc, + 0xc90a, 0x80, + 0xc90b, 0x44, + 0x9044, 0x02, + 0x9045, 0x31, + 0x9046, 0xe2, + 0xc90c, 0x07, + 0xc90d, 0xe0, + 0xc90e, 0x80, + 0xc90f, 0x47, + 0x9047, 0x90, + 0x9048, 0x83, + 0x9049, 0x81, + 0x904a, 0xe0, + 0x904b, 0x60, + 0x904c, 0x08, + 0x904d, 0x90, + 0x904e, 0xc0, + 0x904f, 0x43, + 0x9050, 0x74, + 0x9051, 0x01, + 0x9052, 0xf0, + 0x9053, 0x80, + 0x9054, 0x05, + 0x9055, 0xE4, + 0x9056, 0x90, + 0x9057, 0xc0, + 0x9058, 0x43, + 0x9059, 0xf0, + 0x905a, 0x02, + 0x905b, 0x07, + 0x905c, 0xec, + 0xc910, 0x5d, + 0xc911, 0xca, + 0xc912, 0x80, + 0xc913, 0x5d, + 0x905d, 0xa3, + 0x905e, 0x04, + 0x905f, 0xf0, + 0x9060, 0xa3, + 0x9061, 0x04, + 0x9062, 0xf0, + 0x9063, 0x22, + 0xc914, 0x72, + 0xc915, 0x92, + 0xc916, 0x80, + 0xc917, 0x64, + 0x9064, 0x74, + 0x9065, 0x01, + 0x9066, 0x02, + 0x9067, 0x72, + 0x9068, 0x95, + 0xc918, 0x47, + 0xc919, 0xf2, + 0xc91a, 0x81, + 0xc91b, 0x69, + 0x9169, 0x74, + 0x916a, 0x02, + 0x916b, 0xf0, + 0x916c, 0xec, + 0x916d, 0xb4, + 0x916e, 0x10, + 0x916f, 0x0a, + 0x9170, 0x90, + 0x9171, 0x80, + 0x9172, 0x16, + 0x9173, 0xe0, + 0x9174, 0x70, + 0x9175, 0x04, + 0x9176, 0x90, + 0x9177, 0xd3, + 0x9178, 0xc4, + 0x9179, 0xf0, + 0x917a, 0x22, + 0xc91c, 0x0a, + 0xc91d, 0xbe, + 0xc91e, 0x80, + 0xc91f, 0x73, + 0x9073, 0xfc, + 0x9074, 0xa3, + 0x9075, 0xe0, + 0x9076, 0xf5, + 0x9077, 0x82, + 0x9078, 0x8c, + 0x9079, 0x83, + 0x907a, 0xa3, + 0x907b, 0xa3, + 0x907c, 0xe0, + 0x907d, 0xfc, + 0x907e, 0xa3, + 0x907f, 0xe0, + 0x9080, 0xc3, + 0x9081, 0x9f, + 0x9082, 0xff, + 0x9083, 0xec, + 0x9084, 0x9e, + 0x9085, 0xfe, + 0x9086, 0x02, + 0x9087, 0x0a, + 0x9088, 0xea, + 0xc920, 0x47, + 0xc921, 0x38, + 0xc922, 0x80, + 0xc923, 0x89, + 0x9089, 0xec, + 0x908a, 0xd3, + 0x908b, 0x94, + 0x908c, 0x20, + 0x908d, 0x40, + 0x908e, 0x01, + 0x908f, 0x1c, + 0x9090, 0x90, + 0x9091, 0xd3, + 0x9092, 0xd4, + 0x9093, 0xec, + 0x9094, 0xf0, + 0x9095, 0x02, + 0x9096, 0x47, + 0x9097, 0x3d, + 0xc924, 0x45, + 0xc925, 0xca, + 0xc926, 0x80, + 0xc927, 0x98, + 0x9098, 0x12, + 0x9099, 0x77, + 0x909a, 0xd6, + 0x909b, 0x02, + 0x909c, 0x45, + 0x909d, 0xcd, + 0xc928, 0x20, + 0xc929, 0xd5, + 0xc92a, 0x80, + 0xc92b, 0x9e, + 0x909e, 0x90, + 0x909f, 0x82, + 0x90a0, 0x18, + 0x90a1, 0xe0, + 0x90a2, 0xb4, + 0x90a3, 0x03, + 0x90a4, 0x0e, + 0x90a5, 0x90, + 0x90a6, 0x83, + 0x90a7, 0xbf, + 0x90a8, 0xe0, + 0x90a9, 0x60, + 0x90aa, 0x08, + 0x90ab, 0x90, + 0x90ac, 0x81, + 0x90ad, 0xfc, + 0x90ae, 0xe0, + 0x90af, 0xff, + 0x90b0, 0xc3, + 0x90b1, 0x13, + 0x90b2, 0xf0, + 0x90b3, 0x90, + 0x90b4, 0x81, + 0x90b5, 0xfc, + 0x90b6, 0xe0, + 0x90b7, 0xff, + 0x90b8, 0x02, + 0x90b9, 0x20, + 0x90ba, 0xda, + 0xc92c, 0x70, + 0xc92d, 0xbc, + 0xc92e, 0x80, + 0xc92f, 0xbb, + 0x90bb, 0x90, + 0x90bc, 0x82, + 0x90bd, 0x18, + 0x90be, 0xe0, + 0x90bf, 0xb4, + 0x90c0, 0x03, + 0x90c1, 0x06, + 0x90c2, 0x90, + 0x90c3, 0xc1, + 0x90c4, 0x06, + 0x90c5, 0x74, + 0x90c6, 0x05, + 0x90c7, 0xf0, + 0x90c8, 0x90, + 0x90c9, 0xd3, + 0x90ca, 0xa0, + 0x90cb, 0x02, + 0x90cc, 0x70, + 0x90cd, 0xbf, + 0xc930, 0x72, + 0xc931, 0x21, + 0xc932, 0x81, + 0xc933, 0x3b, + 0x913b, 0x7d, + 0x913c, 0x02, + 0x913d, 0x7f, + 0x913e, 0x7b, + 0x913f, 0x02, + 0x9140, 0x72, + 0x9141, 0x25, + 0xc934, 0x28, + 0xc935, 0xae, + 0xc936, 0x80, + 0xc937, 0xd2, + 0x90d2, 0xf0, + 0x90d3, 0x90, + 0x90d4, 0xd2, + 0x90d5, 0x0a, + 0x90d6, 0x02, + 0x90d7, 0x28, + 0x90d8, 0xb4, + 0xc938, 0x28, + 0xc939, 0xb1, + 0xc93a, 0x80, + 0xc93b, 0xd9, + 0x90d9, 0x90, + 0x90da, 0x83, + 0x90db, 0xba, + 0x90dc, 0xe0, + 0x90dd, 0xff, + 0x90de, 0x90, + 0x90df, 0xd2, + 0x90e0, 0x08, + 0x90e1, 0xe0, + 0x90e2, 0xe4, + 0x90e3, 0xef, + 0x90e4, 0xf0, + 0x90e5, 0xa3, + 0x90e6, 0xe0, + 0x90e7, 0x74, + 0x90e8, 0xff, + 0x90e9, 0xf0, + 0x90ea, 0x90, + 0x90eb, 0xd2, + 0x90ec, 0x0a, + 0x90ed, 0x02, + 0x90ee, 0x28, + 0x90ef, 0xb4, + 0xc93c, 0x29, + 0xc93d, 0x79, + 0xc93e, 0x80, + 0xc93f, 0xf0, + 0x90f0, 0xf0, + 0x90f1, 0x90, + 0x90f2, 0xd2, + 0x90f3, 0x0e, + 0x90f4, 0x02, + 0x90f5, 0x29, + 0x90f6, 0x7f, + 0xc940, 0x29, + 0xc941, 0x7c, + 0xc942, 0x80, + 0xc943, 0xf7, + 0x90f7, 0x90, + 0x90f8, 0x83, + 0x90f9, 0xba, + 0x90fa, 0xe0, + 0x90fb, 0xff, + 0x90fc, 0x90, + 0x90fd, 0xd2, + 0x90fe, 0x0c, + 0x90ff, 0xe0, + 0x9100, 0xe4, + 0x9101, 0xef, + 0x9102, 0xf0, + 0x9103, 0xa3, + 0x9104, 0xe0, + 0x9105, 0x74, + 0x9106, 0xff, + 0x9107, 0xf0, + 0x9108, 0x90, + 0x9109, 0xd2, + 0x910a, 0x0e, + 0x910b, 0x02, + 0x910c, 0x29, + 0x910d, 0x7f, + 0xc944, 0x2a, + 0xc945, 0x42, + 0xc946, 0x81, + 0xc947, 0x0e, + 0x910e, 0xf0, + 0x910f, 0x90, + 0x9110, 0xd2, + 0x9111, 0x12, + 0x9112, 0x02, + 0x9113, 0x2a, + 0x9114, 0x48, + 0xc948, 0x2a, + 0xc949, 0x45, + 0xc94a, 0x81, + 0xc94b, 0x15, + 0x9115, 0x90, + 0x9116, 0x83, + 0x9117, 0xba, + 0x9118, 0xe0, + 0x9119, 0xff, + 0x911a, 0x90, + 0x911b, 0xd2, + 0x911c, 0x10, + 0x911d, 0xe0, + 0x911e, 0xe4, + 0x911f, 0xef, + 0x9120, 0xf0, + 0x9121, 0xa3, + 0x9122, 0xe0, + 0x9123, 0x74, + 0x9124, 0xff, + 0x9125, 0xf0, + 0x9126, 0x90, + 0x9127, 0xd2, + 0x9128, 0x12, + 0x9129, 0x02, + 0x912a, 0x2a, + 0x912b, 0x48, + 0xc900, 0x01, + 0x0000, 0x00, +}; + +static const u16 vs6624_p2[] = { + 0x806f, 0x01, + 0x058c, 0x01, + 0x0000, 0x00, +}; + +static const u16 vs6624_run_setup[] = { + 0x1d18, 0x00, /* Enableconstrainedwhitebalance */ + VS6624_PEAK_MIN_OUT_G_MSB, 0x3c, /* Damper PeakGain Output MSB */ + VS6624_PEAK_MIN_OUT_G_LSB, 0x66, /* Damper PeakGain Output LSB */ + VS6624_CM_LOW_THR_MSB, 0x65, /* Damper Low MSB */ + VS6624_CM_LOW_THR_LSB, 0xd1, /* Damper Low LSB */ + VS6624_CM_HIGH_THR_MSB, 0x66, /* Damper High MSB */ + VS6624_CM_HIGH_THR_LSB, 0x62, /* Damper High LSB */ + VS6624_CM_MIN_OUT_MSB, 0x00, /* Damper Min output MSB */ + VS6624_CM_MIN_OUT_LSB, 0x00, /* Damper Min output LSB */ + VS6624_NORA_DISABLE, 0x00, /* Nora fDisable */ + VS6624_NORA_USAGE, 0x04, /* Nora usage */ + VS6624_NORA_LOW_THR_MSB, 0x63, /* Damper Low MSB Changed 0x63 to 0x65 */ + VS6624_NORA_LOW_THR_LSB, 0xd1, /* Damper Low LSB */ + VS6624_NORA_HIGH_THR_MSB, 0x68, /* Damper High MSB */ + VS6624_NORA_HIGH_THR_LSB, 0xdd, /* Damper High LSB */ + VS6624_NORA_MIN_OUT_MSB, 0x3a, /* Damper Min output MSB */ + VS6624_NORA_MIN_OUT_LSB, 0x00, /* Damper Min output LSB */ + VS6624_F2B_DISABLE, 0x00, /* Disable */ + 0x1d8a, 0x30, /* MAXWeightHigh */ + 0x1d91, 0x62, /* fpDamperLowThresholdHigh MSB */ + 0x1d92, 0x4a, /* fpDamperLowThresholdHigh LSB */ + 0x1d95, 0x65, /* fpDamperHighThresholdHigh MSB */ + 0x1d96, 0x0e, /* fpDamperHighThresholdHigh LSB */ + 0x1da1, 0x3a, /* fpMinimumDamperOutputLow MSB */ + 0x1da2, 0xb8, /* fpMinimumDamperOutputLow LSB */ + 0x1e08, 0x06, /* MAXWeightLow */ + 0x1e0a, 0x0a, /* MAXWeightHigh */ + 0x1601, 0x3a, /* Red A MSB */ + 0x1602, 0x14, /* Red A LSB */ + 0x1605, 0x3b, /* Blue A MSB */ + 0x1606, 0x85, /* BLue A LSB */ + 0x1609, 0x3b, /* RED B MSB */ + 0x160a, 0x85, /* RED B LSB */ + 0x160d, 0x3a, /* Blue B MSB */ + 0x160e, 0x14, /* Blue B LSB */ + 0x1611, 0x30, /* Max Distance from Locus MSB */ + 0x1612, 0x8f, /* Max Distance from Locus MSB */ + 0x1614, 0x01, /* Enable constrainer */ + 0x0000, 0x00, +}; + +static const u16 vs6624_default[] = { + VS6624_CONTRAST0, 0x84, + VS6624_SATURATION0, 0x75, + VS6624_GAMMA0, 0x11, + VS6624_CONTRAST1, 0x84, + VS6624_SATURATION1, 0x75, + VS6624_GAMMA1, 0x11, + VS6624_MAN_RG, 0x80, + VS6624_MAN_GG, 0x80, + VS6624_MAN_BG, 0x80, + VS6624_WB_MODE, 0x1, + VS6624_EXPO_COMPENSATION, 0xfe, + VS6624_EXPO_METER, 0x0, + VS6624_LIGHT_FREQ, 0x64, + VS6624_PEAK_GAIN, 0xe, + VS6624_PEAK_LOW_THR, 0x28, + VS6624_HMIRROR0, 0x0, + VS6624_VFLIP0, 0x0, + VS6624_ZOOM_HSTEP0_MSB, 0x0, + VS6624_ZOOM_HSTEP0_LSB, 0x1, + VS6624_ZOOM_VSTEP0_MSB, 0x0, + VS6624_ZOOM_VSTEP0_LSB, 0x1, + VS6624_PAN_HSTEP0_MSB, 0x0, + VS6624_PAN_HSTEP0_LSB, 0xf, + VS6624_PAN_VSTEP0_MSB, 0x0, + VS6624_PAN_VSTEP0_LSB, 0xf, + VS6624_SENSOR_MODE, 0x1, + VS6624_SYNC_CODE_SETUP, 0x21, + VS6624_DISABLE_FR_DAMPER, 0x0, + VS6624_FR_DEN, 0x1, + VS6624_FR_NUM_LSB, 0xf, + VS6624_INIT_PIPE_SETUP, 0x0, + VS6624_IMG_FMT0, 0x0, + VS6624_YUV_SETUP, 0x1, + VS6624_IMAGE_SIZE0, 0x2, + 0x0000, 0x00, +}; + +static inline struct vs6624 *to_vs6624(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vs6624, sd); +} +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct vs6624, hdl)->sd; +} + +static int vs6624_read(struct v4l2_subdev *sd, u16 index) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + buf[0] = index >> 8; + buf[1] = index; + i2c_master_send(client, buf, 2); + i2c_master_recv(client, buf, 1); + + return buf[0]; +} + +static int vs6624_write(struct v4l2_subdev *sd, u16 index, + u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[3]; + + buf[0] = index >> 8; + buf[1] = index; + buf[2] = value; + + return i2c_master_send(client, buf, 3); +} + +static int vs6624_writeregs(struct v4l2_subdev *sd, const u16 *regs) +{ + u16 reg; + u8 data; + + while (*regs != 0x00) { + reg = *regs++; + data = *regs++; + + vs6624_write(sd, reg, data); + } + return 0; +} + +static int vs6624_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + vs6624_write(sd, VS6624_CONTRAST0, ctrl->val); + break; + case V4L2_CID_SATURATION: + vs6624_write(sd, VS6624_SATURATION0, ctrl->val); + break; + case V4L2_CID_HFLIP: + vs6624_write(sd, VS6624_HMIRROR0, ctrl->val); + break; + case V4L2_CID_VFLIP: + vs6624_write(sd, VS6624_VFLIP0, ctrl->val); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vs6624_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(vs6624_formats)) + return -EINVAL; + + *code = vs6624_formats[index].mbus_code; + return 0; +} + +static int vs6624_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + int index; + + for (index = 0; index < ARRAY_SIZE(vs6624_formats); index++) + if (vs6624_formats[index].mbus_code == fmt->code) + break; + if (index >= ARRAY_SIZE(vs6624_formats)) { + /* default to first format */ + index = 0; + fmt->code = vs6624_formats[0].mbus_code; + } + + /* sensor mode is VGA */ + if (fmt->width > VGA_WIDTH) + fmt->width = VGA_WIDTH; + if (fmt->height > VGA_HEIGHT) + fmt->height = VGA_HEIGHT; + fmt->width = fmt->width & (~3); + fmt->height = fmt->height & (~3); + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = vs6624_formats[index].colorspace; + return 0; +} + +static int vs6624_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct vs6624 *sensor = to_vs6624(sd); + int ret; + + ret = vs6624_try_mbus_fmt(sd, fmt); + if (ret) + return ret; + + /* set image format */ + switch (fmt->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + vs6624_write(sd, VS6624_IMG_FMT0, 0x0); + vs6624_write(sd, VS6624_YUV_SETUP, 0x1); + break; + case V4L2_MBUS_FMT_YUYV8_2X8: + vs6624_write(sd, VS6624_IMG_FMT0, 0x0); + vs6624_write(sd, VS6624_YUV_SETUP, 0x3); + break; + case V4L2_MBUS_FMT_RGB565_2X8_LE: + vs6624_write(sd, VS6624_IMG_FMT0, 0x4); + vs6624_write(sd, VS6624_RGB_SETUP, 0x0); + break; + default: + return -EINVAL; + } + + /* set image size */ + if ((fmt->width == VGA_WIDTH) && (fmt->height == VGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x2); + else if ((fmt->width == QVGA_WIDTH) && (fmt->height == QVGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x4); + else if ((fmt->width == QQVGA_WIDTH) && (fmt->height == QQVGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x6); + else if ((fmt->width == CIF_WIDTH) && (fmt->height == CIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x3); + else if ((fmt->width == QCIF_WIDTH) && (fmt->height == QCIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x5); + else if ((fmt->width == QQCIF_WIDTH) && (fmt->height == QQCIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x7); + else { + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x8); + vs6624_write(sd, VS6624_MAN_HSIZE0_MSB, fmt->width >> 8); + vs6624_write(sd, VS6624_MAN_HSIZE0_LSB, fmt->width & 0xFF); + vs6624_write(sd, VS6624_MAN_VSIZE0_MSB, fmt->height >> 8); + vs6624_write(sd, VS6624_MAN_VSIZE0_LSB, fmt->height & 0xFF); + vs6624_write(sd, VS6624_CROP_CTRL0, 0x1); + } + + sensor->fmt = *fmt; + + return 0; +} + +static int vs6624_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct vs6624 *sensor = to_vs6624(sd); + + *fmt = sensor->fmt; + return 0; +} + +static int vs6624_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct vs6624 *sensor = to_vs6624(sd); + struct v4l2_captureparm *cp = &parms->parm.capture; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(*cp)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + cp->timeperframe.numerator = sensor->frame_rate.denominator; + cp->timeperframe.denominator = sensor->frame_rate.numerator; + return 0; +} + +static int vs6624_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct vs6624 *sensor = to_vs6624(sd); + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + if (tpf->numerator == 0 || tpf->denominator == 0 + || (tpf->denominator > tpf->numerator * MAX_FRAME_RATE)) { + /* reset to max frame rate */ + tpf->numerator = 1; + tpf->denominator = MAX_FRAME_RATE; + } + sensor->frame_rate.numerator = tpf->denominator; + sensor->frame_rate.denominator = tpf->numerator; + vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0); + vs6624_write(sd, VS6624_FR_NUM_MSB, + sensor->frame_rate.numerator >> 8); + vs6624_write(sd, VS6624_FR_NUM_LSB, + sensor->frame_rate.numerator & 0xFF); + vs6624_write(sd, VS6624_FR_DEN, + sensor->frame_rate.denominator & 0xFF); + return 0; +} + +static int vs6624_s_stream(struct v4l2_subdev *sd, int enable) +{ + if (enable) + vs6624_write(sd, VS6624_USER_CMD, 0x2); + else + vs6624_write(sd, VS6624_USER_CMD, 0x4); + udelay(100); + return 0; +} + +static int vs6624_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + rev = (vs6624_read(sd, VS6624_FW_VSN_MAJOR) << 8) + | vs6624_read(sd, VS6624_FW_VSN_MINOR); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_VS6624, rev); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vs6624_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = vs6624_read(sd, reg->reg & 0xffff); + reg->size = 1; + return 0; +} + +static int vs6624_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + vs6624_write(sd, reg->reg & 0xffff, reg->val & 0xff); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops vs6624_ctrl_ops = { + .s_ctrl = vs6624_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops vs6624_core_ops = { + .g_chip_ident = vs6624_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = vs6624_g_register, + .s_register = vs6624_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops vs6624_video_ops = { + .enum_mbus_fmt = vs6624_enum_mbus_fmt, + .try_mbus_fmt = vs6624_try_mbus_fmt, + .s_mbus_fmt = vs6624_s_mbus_fmt, + .g_mbus_fmt = vs6624_g_mbus_fmt, + .s_parm = vs6624_s_parm, + .g_parm = vs6624_g_parm, + .s_stream = vs6624_s_stream, +}; + +static const struct v4l2_subdev_ops vs6624_ops = { + .core = &vs6624_core_ops, + .video = &vs6624_video_ops, +}; + +static int vs6624_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vs6624 *sensor; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + const unsigned *ce; + int ret; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EIO; + + ce = client->dev.platform_data; + if (ce == NULL) + return -EINVAL; + + ret = gpio_request(*ce, "VS6624 Chip Enable"); + if (ret) { + v4l_err(client, "failed to request GPIO %d\n", *ce); + return ret; + } + gpio_direction_output(*ce, 1); + /* wait 100ms before any further i2c writes are performed */ + mdelay(100); + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) { + gpio_free(*ce); + return -ENOMEM; + } + + sd = &sensor->sd; + v4l2_i2c_subdev_init(sd, client, &vs6624_ops); + + vs6624_writeregs(sd, vs6624_p1); + vs6624_write(sd, VS6624_MICRO_EN, 0x2); + vs6624_write(sd, VS6624_DIO_EN, 0x1); + mdelay(10); + vs6624_writeregs(sd, vs6624_p2); + + vs6624_writeregs(sd, vs6624_default); + vs6624_write(sd, VS6624_HSYNC_SETUP, 0xF); + vs6624_writeregs(sd, vs6624_run_setup); + + /* set frame rate */ + sensor->frame_rate.numerator = MAX_FRAME_RATE; + sensor->frame_rate.denominator = 1; + vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0); + vs6624_write(sd, VS6624_FR_NUM_MSB, + sensor->frame_rate.numerator >> 8); + vs6624_write(sd, VS6624_FR_NUM_LSB, + sensor->frame_rate.numerator & 0xFF); + vs6624_write(sd, VS6624_FR_DEN, + sensor->frame_rate.denominator & 0xFF); + + sensor->fmt = vs6624_default_fmt; + sensor->ce_pin = *ce; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + hdl = &sensor->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x87); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xFF, 1, 0x78); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + /* hook the control handler into the driver */ + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(sensor); + gpio_free(*ce); + return err; + } + + /* initialize the hardware to the default control values */ + ret = v4l2_ctrl_handler_setup(hdl); + if (ret) { + v4l2_ctrl_handler_free(hdl); + kfree(sensor); + gpio_free(*ce); + } + return ret; +} + +static int vs6624_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vs6624 *sensor = to_vs6624(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + gpio_free(sensor->ce_pin); + kfree(sensor); + return 0; +} + +static const struct i2c_device_id vs6624_id[] = { + {"vs6624", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, vs6624_id); + +static struct i2c_driver vs6624_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "vs6624", + }, + .probe = vs6624_probe, + .remove = vs6624_remove, + .id_table = vs6624_id, +}; + +module_i2c_driver(vs6624_driver); + +MODULE_DESCRIPTION("VS6624 sensor driver"); +MODULE_AUTHOR("Scott Jiang "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/vs6624_regs.h b/drivers/media/i2c/vs6624_regs.h new file mode 100644 index 00000000..6ba2ee25 --- /dev/null +++ b/drivers/media/i2c/vs6624_regs.h @@ -0,0 +1,337 @@ +/* + * vs6624 - ST VS6624 CMOS image sensor registers + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _VS6624_REGS_H_ +#define _VS6624_REGS_H_ + +/* low level control registers */ +#define VS6624_MICRO_EN 0xC003 /* power enable for all MCU clock */ +#define VS6624_DIO_EN 0xC044 /* enable digital I/O */ +/* device parameters */ +#define VS6624_DEV_ID_MSB 0x0001 /* device id MSB */ +#define VS6624_DEV_ID_LSB 0x0002 /* device id LSB */ +#define VS6624_FW_VSN_MAJOR 0x0004 /* firmware version major */ +#define VS6624_FW_VSN_MINOR 0x0006 /* firmware version minor */ +#define VS6624_PATCH_VSN_MAJOR 0x0008 /* patch version major */ +#define VS6624_PATCH_VSN_MINOR 0x000A /* patch version minor */ +/* host interface manager control */ +#define VS6624_USER_CMD 0x0180 /* user level control of operating states */ +/* host interface manager status */ +#define VS6624_STATE 0x0202 /* current state of the mode manager */ +/* run mode control */ +#define VS6624_METER_ON 0x0280 /* if false AE and AWB are disabled */ +/* mode setup */ +#define VS6624_ACTIVE_PIPE_SETUP 0x0302 /* select the active bank for non view live mode */ +#define VS6624_SENSOR_MODE 0x0308 /* select the different sensor mode */ +/* pipe setup bank0 */ +#define VS6624_IMAGE_SIZE0 0x0380 /* required output dimension */ +#define VS6624_MAN_HSIZE0_MSB 0x0383 /* input required manual H size MSB */ +#define VS6624_MAN_HSIZE0_LSB 0x0384 /* input required manual H size LSB */ +#define VS6624_MAN_VSIZE0_MSB 0x0387 /* input required manual V size MSB */ +#define VS6624_MAN_VSIZE0_LSB 0x0388 /* input required manual V size LSB */ +#define VS6624_ZOOM_HSTEP0_MSB 0x038B /* set the zoom H step MSB */ +#define VS6624_ZOOM_HSTEP0_LSB 0x038C /* set the zoom H step LSB */ +#define VS6624_ZOOM_VSTEP0_MSB 0x038F /* set the zoom V step MSB */ +#define VS6624_ZOOM_VSTEP0_LSB 0x0390 /* set the zoom V step LSB */ +#define VS6624_ZOOM_CTRL0 0x0392 /* control zoon in, out and stop */ +#define VS6624_PAN_HSTEP0_MSB 0x0395 /* set the pan H step MSB */ +#define VS6624_PAN_HSTEP0_LSB 0x0396 /* set the pan H step LSB */ +#define VS6624_PAN_VSTEP0_MSB 0x0399 /* set the pan V step MSB */ +#define VS6624_PAN_VSTEP0_LSB 0x039A /* set the pan V step LSB */ +#define VS6624_PAN_CTRL0 0x039C /* control pan operation */ +#define VS6624_CROP_CTRL0 0x039E /* select cropping mode */ +#define VS6624_CROP_HSTART0_MSB 0x03A1 /* set the cropping H start address MSB */ +#define VS6624_CROP_HSTART0_LSB 0x03A2 /* set the cropping H start address LSB */ +#define VS6624_CROP_HSIZE0_MSB 0x03A5 /* set the cropping H size MSB */ +#define VS6624_CROP_HSIZE0_LSB 0x03A6 /* set the cropping H size LSB */ +#define VS6624_CROP_VSTART0_MSB 0x03A9 /* set the cropping V start address MSB */ +#define VS6624_CROP_VSTART0_LSB 0x03AA /* set the cropping V start address LSB */ +#define VS6624_CROP_VSIZE0_MSB 0x03AD /* set the cropping V size MSB */ +#define VS6624_CROP_VSIZE0_LSB 0x03AE /* set the cropping V size LSB */ +#define VS6624_IMG_FMT0 0x03B0 /* select required output image format */ +#define VS6624_BAYER_OUT_ALIGN0 0x03B2 /* set bayer output alignment */ +#define VS6624_CONTRAST0 0x03B4 /* contrast control for output */ +#define VS6624_SATURATION0 0x03B6 /* saturation control for output */ +#define VS6624_GAMMA0 0x03B8 /* gamma settings */ +#define VS6624_HMIRROR0 0x03BA /* horizontal image orientation flip */ +#define VS6624_VFLIP0 0x03BC /* vertical image orientation flip */ +#define VS6624_CHANNEL_ID0 0x03BE /* logical DMA channel number */ +/* pipe setup bank1 */ +#define VS6624_IMAGE_SIZE1 0x0400 /* required output dimension */ +#define VS6624_MAN_HSIZE1_MSB 0x0403 /* input required manual H size MSB */ +#define VS6624_MAN_HSIZE1_LSB 0x0404 /* input required manual H size LSB */ +#define VS6624_MAN_VSIZE1_MSB 0x0407 /* input required manual V size MSB */ +#define VS6624_MAN_VSIZE1_LSB 0x0408 /* input required manual V size LSB */ +#define VS6624_ZOOM_HSTEP1_MSB 0x040B /* set the zoom H step MSB */ +#define VS6624_ZOOM_HSTEP1_LSB 0x040C /* set the zoom H step LSB */ +#define VS6624_ZOOM_VSTEP1_MSB 0x040F /* set the zoom V step MSB */ +#define VS6624_ZOOM_VSTEP1_LSB 0x0410 /* set the zoom V step LSB */ +#define VS6624_ZOOM_CTRL1 0x0412 /* control zoon in, out and stop */ +#define VS6624_PAN_HSTEP1_MSB 0x0415 /* set the pan H step MSB */ +#define VS6624_PAN_HSTEP1_LSB 0x0416 /* set the pan H step LSB */ +#define VS6624_PAN_VSTEP1_MSB 0x0419 /* set the pan V step MSB */ +#define VS6624_PAN_VSTEP1_LSB 0x041A /* set the pan V step LSB */ +#define VS6624_PAN_CTRL1 0x041C /* control pan operation */ +#define VS6624_CROP_CTRL1 0x041E /* select cropping mode */ +#define VS6624_CROP_HSTART1_MSB 0x0421 /* set the cropping H start address MSB */ +#define VS6624_CROP_HSTART1_LSB 0x0422 /* set the cropping H start address LSB */ +#define VS6624_CROP_HSIZE1_MSB 0x0425 /* set the cropping H size MSB */ +#define VS6624_CROP_HSIZE1_LSB 0x0426 /* set the cropping H size LSB */ +#define VS6624_CROP_VSTART1_MSB 0x0429 /* set the cropping V start address MSB */ +#define VS6624_CROP_VSTART1_LSB 0x042A /* set the cropping V start address LSB */ +#define VS6624_CROP_VSIZE1_MSB 0x042D /* set the cropping V size MSB */ +#define VS6624_CROP_VSIZE1_LSB 0x042E /* set the cropping V size LSB */ +#define VS6624_IMG_FMT1 0x0430 /* select required output image format */ +#define VS6624_BAYER_OUT_ALIGN1 0x0432 /* set bayer output alignment */ +#define VS6624_CONTRAST1 0x0434 /* contrast control for output */ +#define VS6624_SATURATION1 0x0436 /* saturation control for output */ +#define VS6624_GAMMA1 0x0438 /* gamma settings */ +#define VS6624_HMIRROR1 0x043A /* horizontal image orientation flip */ +#define VS6624_VFLIP1 0x043C /* vertical image orientation flip */ +#define VS6624_CHANNEL_ID1 0x043E /* logical DMA channel number */ +/* view live control */ +#define VS6624_VIEW_LIVE_EN 0x0480 /* enable view live mode */ +#define VS6624_INIT_PIPE_SETUP 0x0482 /* select initial pipe setup bank */ +/* view live status */ +#define VS6624_CUR_PIPE_SETUP 0x0500 /* indicates most recently applied setup bank */ +/* power management */ +#define VS6624_TIME_TO_POWER_DOWN 0x0580 /* automatically transition time to stop mode */ +/* video timing parameter host inputs */ +#define VS6624_EXT_CLK_FREQ_NUM_MSB 0x0605 /* external clock frequency numerator MSB */ +#define VS6624_EXT_CLK_FREQ_NUM_LSB 0x0606 /* external clock frequency numerator LSB */ +#define VS6624_EXT_CLK_FREQ_DEN 0x0608 /* external clock frequency denominator */ +/* video timing control */ +#define VS6624_SYS_CLK_MODE 0x0880 /* decides system clock frequency */ +/* frame dimension parameter host inputs */ +#define VS6624_LIGHT_FREQ 0x0C80 /* AC frequency used for flicker free time */ +#define VS6624_FLICKER_COMPAT 0x0C82 /* flicker compatible frame length */ +/* static frame rate control */ +#define VS6624_FR_NUM_MSB 0x0D81 /* desired frame rate numerator MSB */ +#define VS6624_FR_NUM_LSB 0x0D82 /* desired frame rate numerator LSB */ +#define VS6624_FR_DEN 0x0D84 /* desired frame rate denominator */ +/* automatic frame rate control */ +#define VS6624_DISABLE_FR_DAMPER 0x0E80 /* defines frame rate mode */ +#define VS6624_MIN_DAMPER_OUT_MSB 0x0E8C /* minimum frame rate MSB */ +#define VS6624_MIN_DAMPER_OUT_LSB 0x0E8A /* minimum frame rate LSB */ +/* exposure controls */ +#define VS6624_EXPO_MODE 0x1180 /* exposure mode */ +#define VS6624_EXPO_METER 0x1182 /* weights to be associated with the zones */ +#define VS6624_EXPO_TIME_NUM 0x1184 /* exposure time numerator */ +#define VS6624_EXPO_TIME_DEN 0x1186 /* exposure time denominator */ +#define VS6624_EXPO_TIME_MSB 0x1189 /* exposure time for the Manual Mode MSB */ +#define VS6624_EXPO_TIME_LSB 0x118A /* exposure time for the Manual Mode LSB */ +#define VS6624_EXPO_COMPENSATION 0x1190 /* exposure compensation */ +#define VS6624_DIRECT_COARSE_MSB 0x1195 /* coarse integration lines for Direct Mode MSB */ +#define VS6624_DIRECT_COARSE_LSB 0x1196 /* coarse integration lines for Direct Mode LSB */ +#define VS6624_DIRECT_FINE_MSB 0x1199 /* fine integration pixels for Direct Mode MSB */ +#define VS6624_DIRECT_FINE_LSB 0x119A /* fine integration pixels for Direct Mode LSB */ +#define VS6624_DIRECT_ANAL_GAIN_MSB 0x119D /* analog gain for Direct Mode MSB */ +#define VS6624_DIRECT_ANAL_GAIN_LSB 0x119E /* analog gain for Direct Mode LSB */ +#define VS6624_DIRECT_DIGI_GAIN_MSB 0x11A1 /* digital gain for Direct Mode MSB */ +#define VS6624_DIRECT_DIGI_GAIN_LSB 0x11A2 /* digital gain for Direct Mode LSB */ +#define VS6624_FLASH_COARSE_MSB 0x11A5 /* coarse integration lines for Flash Gun Mode MSB */ +#define VS6624_FLASH_COARSE_LSB 0x11A6 /* coarse integration lines for Flash Gun Mode LSB */ +#define VS6624_FLASH_FINE_MSB 0x11A9 /* fine integration pixels for Flash Gun Mode MSB */ +#define VS6624_FLASH_FINE_LSB 0x11AA /* fine integration pixels for Flash Gun Mode LSB */ +#define VS6624_FLASH_ANAL_GAIN_MSB 0x11AD /* analog gain for Flash Gun Mode MSB */ +#define VS6624_FLASH_ANAL_GAIN_LSB 0x11AE /* analog gain for Flash Gun Mode LSB */ +#define VS6624_FLASH_DIGI_GAIN_MSB 0x11B1 /* digital gain for Flash Gun Mode MSB */ +#define VS6624_FLASH_DIGI_GAIN_LSB 0x11B2 /* digital gain for Flash Gun Mode LSB */ +#define VS6624_FREEZE_AE 0x11B4 /* freeze auto exposure */ +#define VS6624_MAX_INT_TIME_MSB 0x11B7 /* user maximum integration time MSB */ +#define VS6624_MAX_INT_TIME_LSB 0x11B8 /* user maximum integration time LSB */ +#define VS6624_FLASH_AG_THR_MSB 0x11BB /* recommend flash gun analog gain threshold MSB */ +#define VS6624_FLASH_AG_THR_LSB 0x11BC /* recommend flash gun analog gain threshold LSB */ +#define VS6624_ANTI_FLICKER_MODE 0x11C0 /* anti flicker mode */ +/* white balance control */ +#define VS6624_WB_MODE 0x1480 /* set white balance mode */ +#define VS6624_MAN_RG 0x1482 /* user setting for red channel gain */ +#define VS6624_MAN_GG 0x1484 /* user setting for green channel gain */ +#define VS6624_MAN_BG 0x1486 /* user setting for blue channel gain */ +#define VS6624_FLASH_RG_MSB 0x148B /* red gain for Flash Gun MSB */ +#define VS6624_FLASH_RG_LSB 0x148C /* red gain for Flash Gun LSB */ +#define VS6624_FLASH_GG_MSB 0x148F /* green gain for Flash Gun MSB */ +#define VS6624_FLASH_GG_LSB 0x1490 /* green gain for Flash Gun LSB */ +#define VS6624_FLASH_BG_MSB 0x1493 /* blue gain for Flash Gun MSB */ +#define VS6624_FLASH_BG_LSB 0x1494 /* blue gain for Flash Gun LSB */ +/* sensor setup */ +#define VS6624_BC_OFFSET 0x1990 /* Black Correction Offset */ +/* image stability */ +#define VS6624_STABLE_WB 0x1900 /* white balance stable */ +#define VS6624_STABLE_EXPO 0x1902 /* exposure stable */ +#define VS6624_STABLE 0x1906 /* system stable */ +/* flash control */ +#define VS6624_FLASH_MODE 0x1A80 /* flash mode */ +#define VS6624_FLASH_OFF_LINE_MSB 0x1A83 /* off line at flash pulse mode MSB */ +#define VS6624_FLASH_OFF_LINE_LSB 0x1A84 /* off line at flash pulse mode LSB */ +/* flash status */ +#define VS6624_FLASH_RECOM 0x1B00 /* flash gun is recommended */ +#define VS6624_FLASH_GRAB_COMPLETE 0x1B02 /* flash gun image has been grabbed */ +/* scythe filter controls */ +#define VS6624_SCYTHE_FILTER 0x1D80 /* disable scythe defect correction */ +/* jack filter controls */ +#define VS6624_JACK_FILTER 0x1E00 /* disable jack defect correction */ +/* demosaic control */ +#define VS6624_ANTI_ALIAS_FILTER 0x1E80 /* anti alias filter suppress */ +/* color matrix dampers */ +#define VS6624_CM_DISABLE 0x1F00 /* disable color matrix damper */ +#define VS6624_CM_LOW_THR_MSB 0x1F03 /* low threshold for exposure MSB */ +#define VS6624_CM_LOW_THR_LSB 0x1F04 /* low threshold for exposure LSB */ +#define VS6624_CM_HIGH_THR_MSB 0x1F07 /* high threshold for exposure MSB */ +#define VS6624_CM_HIGH_THR_LSB 0x1F08 /* high threshold for exposure LSB */ +#define VS6624_CM_MIN_OUT_MSB 0x1F0B /* minimum possible damper output MSB */ +#define VS6624_CM_MIN_OUT_LSB 0x1F0C /* minimum possible damper output LSB */ +/* peaking control */ +#define VS6624_PEAK_GAIN 0x2000 /* controls peaking gain */ +#define VS6624_PEAK_G_DISABLE 0x2002 /* disable peak gain damping */ +#define VS6624_PEAK_LOW_THR_G_MSB 0x2005 /* low threshold for exposure for gain MSB */ +#define VS6624_PEAK_LOW_THR_G_LSB 0x2006 /* low threshold for exposure for gain LSB */ +#define VS6624_PEAK_HIGH_THR_G_MSB 0x2009 /* high threshold for exposure for gain MSB */ +#define VS6624_PEAK_HIGH_THR_G_LSB 0x200A /* high threshold for exposure for gain LSB */ +#define VS6624_PEAK_MIN_OUT_G_MSB 0x200D /* minimum damper output for gain MSB */ +#define VS6624_PEAK_MIN_OUT_G_LSB 0x200E /* minimum damper output for gain LSB */ +#define VS6624_PEAK_LOW_THR 0x2010 /* adjust degree of coring */ +#define VS6624_PEAK_C_DISABLE 0x2012 /* disable coring damping */ +#define VS6624_PEAK_HIGH_THR 0x2014 /* adjust maximum gain */ +#define VS6624_PEAK_LOW_THR_C_MSB 0x2017 /* low threshold for exposure for coring MSB */ +#define VS6624_PEAK_LOW_THR_C_LSB 0x2018 /* low threshold for exposure for coring LSB */ +#define VS6624_PEAK_HIGH_THR_C_MSB 0x201B /* high threshold for exposure for coring MSB */ +#define VS6624_PEAK_HIGH_THR_C_LSB 0x201C /* high threshold for exposure for coring LSB */ +#define VS6624_PEAK_MIN_OUT_C_MSB 0x201F /* minimum damper output for coring MSB */ +#define VS6624_PEAK_MIN_OUT_C_LSB 0x2020 /* minimum damper output for coring LSB */ +/* pipe 0 RGB to YUV matrix manual control */ +#define VS6624_RYM0_MAN_CTRL 0x2180 /* enable manual RGB to YUV matrix */ +#define VS6624_RYM0_W00_MSB 0x2183 /* row 0 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W00_LSB 0x2184 /* row 0 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W01_MSB 0x2187 /* row 0 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W01_LSB 0x2188 /* row 0 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W02_MSB 0x218C /* row 0 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W02_LSB 0x218D /* row 0 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_W10_MSB 0x2190 /* row 1 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W10_LSB 0x218F /* row 1 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W11_MSB 0x2193 /* row 1 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W11_LSB 0x2194 /* row 1 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W12_MSB 0x2197 /* row 1 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W12_LSB 0x2198 /* row 1 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_W20_MSB 0x219B /* row 2 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W20_LSB 0x219C /* row 2 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W21_MSB 0x21A0 /* row 2 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W21_LSB 0x219F /* row 2 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W22_MSB 0x21A3 /* row 2 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W22_LSB 0x21A4 /* row 2 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_YINY_MSB 0x21A7 /* Y in Y MSB */ +#define VS6624_RYM0_YINY_LSB 0x21A8 /* Y in Y LSB */ +#define VS6624_RYM0_YINCB_MSB 0x21AB /* Y in Cb MSB */ +#define VS6624_RYM0_YINCB_LSB 0x21AC /* Y in Cb LSB */ +#define VS6624_RYM0_YINCR_MSB 0x21B0 /* Y in Cr MSB */ +#define VS6624_RYM0_YINCR_LSB 0x21AF /* Y in Cr LSB */ +/* pipe 1 RGB to YUV matrix manual control */ +#define VS6624_RYM1_MAN_CTRL 0x2200 /* enable manual RGB to YUV matrix */ +#define VS6624_RYM1_W00_MSB 0x2203 /* row 0 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W00_LSB 0x2204 /* row 0 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W01_MSB 0x2207 /* row 0 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W01_LSB 0x2208 /* row 0 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W02_MSB 0x220C /* row 0 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W02_LSB 0x220D /* row 0 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_W10_MSB 0x2210 /* row 1 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W10_LSB 0x220F /* row 1 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W11_MSB 0x2213 /* row 1 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W11_LSB 0x2214 /* row 1 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W12_MSB 0x2217 /* row 1 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W12_LSB 0x2218 /* row 1 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_W20_MSB 0x221B /* row 2 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W20_LSB 0x221C /* row 2 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W21_MSB 0x2220 /* row 2 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W21_LSB 0x221F /* row 2 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W22_MSB 0x2223 /* row 2 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W22_LSB 0x2224 /* row 2 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_YINY_MSB 0x2227 /* Y in Y MSB */ +#define VS6624_RYM1_YINY_LSB 0x2228 /* Y in Y LSB */ +#define VS6624_RYM1_YINCB_MSB 0x222B /* Y in Cb MSB */ +#define VS6624_RYM1_YINCB_LSB 0x222C /* Y in Cb LSB */ +#define VS6624_RYM1_YINCR_MSB 0x2220 /* Y in Cr MSB */ +#define VS6624_RYM1_YINCR_LSB 0x222F /* Y in Cr LSB */ +/* pipe 0 gamma manual control */ +#define VS6624_GAMMA_MAN_CTRL0 0x2280 /* enable manual gamma setup */ +#define VS6624_GAMMA_PEAK_R0 0x2282 /* peaked red channel gamma value */ +#define VS6624_GAMMA_PEAK_G0 0x2284 /* peaked green channel gamma value */ +#define VS6624_GAMMA_PEAK_B0 0x2286 /* peaked blue channel gamma value */ +#define VS6624_GAMMA_UNPEAK_R0 0x2288 /* unpeaked red channel gamma value */ +#define VS6624_GAMMA_UNPEAK_G0 0x228A /* unpeaked green channel gamma value */ +#define VS6624_GAMMA_UNPEAK_B0 0x228C /* unpeaked blue channel gamma value */ +/* pipe 1 gamma manual control */ +#define VS6624_GAMMA_MAN_CTRL1 0x2300 /* enable manual gamma setup */ +#define VS6624_GAMMA_PEAK_R1 0x2302 /* peaked red channel gamma value */ +#define VS6624_GAMMA_PEAK_G1 0x2304 /* peaked green channel gamma value */ +#define VS6624_GAMMA_PEAK_B1 0x2306 /* peaked blue channel gamma value */ +#define VS6624_GAMMA_UNPEAK_R1 0x2308 /* unpeaked red channel gamma value */ +#define VS6624_GAMMA_UNPEAK_G1 0x230A /* unpeaked green channel gamma value */ +#define VS6624_GAMMA_UNPEAK_B1 0x230C /* unpeaked blue channel gamma value */ +/* fade to black */ +#define VS6624_F2B_DISABLE 0x2480 /* disable fade to black */ +#define VS6624_F2B_BLACK_VAL_MSB 0x2483 /* black value MSB */ +#define VS6624_F2B_BLACK_VAL_LSB 0x2484 /* black value LSB */ +#define VS6624_F2B_LOW_THR_MSB 0x2487 /* low threshold for exposure MSB */ +#define VS6624_F2B_LOW_THR_LSB 0x2488 /* low threshold for exposure LSB */ +#define VS6624_F2B_HIGH_THR_MSB 0x248B /* high threshold for exposure MSB */ +#define VS6624_F2B_HIGH_THR_LSB 0x248C /* high threshold for exposure LSB */ +#define VS6624_F2B_MIN_OUT_MSB 0x248F /* minimum damper output MSB */ +#define VS6624_F2B_MIN_OUT_LSB 0x2490 /* minimum damper output LSB */ +/* output formatter control */ +#define VS6624_CODE_CK_EN 0x2580 /* code check enable */ +#define VS6624_BLANK_FMT 0x2582 /* blank format */ +#define VS6624_SYNC_CODE_SETUP 0x2584 /* sync code setup */ +#define VS6624_HSYNC_SETUP 0x2586 /* H sync setup */ +#define VS6624_VSYNC_SETUP 0x2588 /* V sync setup */ +#define VS6624_PCLK_SETUP 0x258A /* PCLK setup */ +#define VS6624_PCLK_EN 0x258C /* PCLK enable */ +#define VS6624_OPF_SP_SETUP 0x258E /* output formatter sp setup */ +#define VS6624_BLANK_DATA_MSB 0x2590 /* blank data MSB */ +#define VS6624_BLANK_DATA_LSB 0x2592 /* blank data LSB */ +#define VS6624_RGB_SETUP 0x2594 /* RGB setup */ +#define VS6624_YUV_SETUP 0x2596 /* YUV setup */ +#define VS6624_VSYNC_RIS_COARSE_H 0x2598 /* V sync rising coarse high */ +#define VS6624_VSYNC_RIS_COARSE_L 0x259A /* V sync rising coarse low */ +#define VS6624_VSYNC_RIS_FINE_H 0x259C /* V sync rising fine high */ +#define VS6624_VSYNC_RIS_FINE_L 0x259E /* V sync rising fine low */ +#define VS6624_VSYNC_FALL_COARSE_H 0x25A0 /* V sync falling coarse high */ +#define VS6624_VSYNC_FALL_COARSE_L 0x25A2 /* V sync falling coarse low */ +#define VS6624_VSYNC_FALL_FINE_H 0x25A4 /* V sync falling fine high */ +#define VS6624_VSYNC_FALL_FINE_L 0x25A6 /* V sync falling fine low */ +#define VS6624_HSYNC_RIS_H 0x25A8 /* H sync rising high */ +#define VS6624_HSYNC_RIS_L 0x25AA /* H sync rising low */ +#define VS6624_HSYNC_FALL_H 0x25AC /* H sync falling high */ +#define VS6624_HSYNC_FALL_L 0x25AE /* H sync falling low */ +#define VS6624_OUT_IF 0x25B0 /* output interface */ +#define VS6624_CCP_EXT_DATA 0x25B2 /* CCP extra data */ +/* NoRA controls */ +#define VS6624_NORA_DISABLE 0x2600 /* NoRA control mode */ +#define VS6624_NORA_USAGE 0x2602 /* usage */ +#define VS6624_NORA_SPLIT_KN 0x2604 /* split kn */ +#define VS6624_NORA_SPLIT_NI 0x2606 /* split ni */ +#define VS6624_NORA_TIGHT_G 0x2608 /* tight green */ +#define VS6624_NORA_DISABLE_NP 0x260A /* disable noro promoting */ +#define VS6624_NORA_LOW_THR_MSB 0x260D /* low threshold for exposure MSB */ +#define VS6624_NORA_LOW_THR_LSB 0x260E /* low threshold for exposure LSB */ +#define VS6624_NORA_HIGH_THR_MSB 0x2611 /* high threshold for exposure MSB */ +#define VS6624_NORA_HIGH_THR_LSB 0x2612 /* high threshold for exposure LSB */ +#define VS6624_NORA_MIN_OUT_MSB 0x2615 /* minimum damper output MSB */ +#define VS6624_NORA_MIN_OUT_LSB 0x2616 /* minimum damper output LSB */ + +#endif diff --git a/drivers/media/i2c/wm8739.c b/drivers/media/i2c/wm8739.c new file mode 100644 index 00000000..3bb99e93 --- /dev/null +++ b/drivers/media/i2c/wm8739.c @@ -0,0 +1,294 @@ +/* + * wm8739 + * + * Copyright (C) 2005 T. Adachi + * + * Copyright (C) 2005 Hans Verkuil + * - Cleanup + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("wm8739 driver"); +MODULE_AUTHOR("T. Adachi, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; + +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ------------------------------------------------------------------------ */ + +enum { + R0 = 0, R1, + R5 = 5, R6, R7, R8, R9, R15 = 15, + TOT_REGS +}; + +struct wm8739_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct { + /* audio cluster */ + struct v4l2_ctrl *volume; + struct v4l2_ctrl *mute; + struct v4l2_ctrl *balance; + }; + u32 clock_freq; +}; + +static inline struct wm8739_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct wm8739_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct wm8739_state, hdl)->sd; +} + +/* ------------------------------------------------------------------------ */ + +static int wm8739_write(struct v4l2_subdev *sd, int reg, u16 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + + if (reg < 0 || reg >= TOT_REGS) { + v4l2_err(sd, "Invalid register R%d\n", reg); + return -1; + } + + v4l2_dbg(1, debug, sd, "write: %02x %02x\n", reg, val); + + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) + return 0; + v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg); + return -1; +} + +static int wm8739_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct wm8739_state *state = to_state(sd); + unsigned int work_l, work_r; + u8 vol_l; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */ + u8 vol_r; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */ + u16 mute; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + break; + + default: + return -EINVAL; + } + + /* normalize ( 65535 to 0 -> 31 to 0 (12dB to -34.5dB) ) */ + work_l = (min(65536 - state->balance->val, 32768) * state->volume->val) / 32768; + work_r = (min(state->balance->val, 32768) * state->volume->val) / 32768; + + vol_l = (long)work_l * 31 / 65535; + vol_r = (long)work_r * 31 / 65535; + + /* set audio volume etc. */ + mute = state->mute->val ? 0x80 : 0; + + /* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB + * Default setting: 0x17 = 0 dB + */ + wm8739_write(sd, R0, (vol_l & 0x1f) | mute); + wm8739_write(sd, R1, (vol_r & 0x1f) | mute); + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static int wm8739_s_clock_freq(struct v4l2_subdev *sd, u32 audiofreq) +{ + struct wm8739_state *state = to_state(sd); + + state->clock_freq = audiofreq; + /* de-activate */ + wm8739_write(sd, R9, 0x000); + switch (audiofreq) { + case 44100: + /* 256fps, fs=44.1k */ + wm8739_write(sd, R8, 0x020); + break; + case 48000: + /* 256fps, fs=48k */ + wm8739_write(sd, R8, 0x000); + break; + case 32000: + /* 256fps, fs=32k */ + wm8739_write(sd, R8, 0x018); + break; + default: + break; + } + /* activate */ + wm8739_write(sd, R9, 0x001); + return 0; +} + +static int wm8739_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_WM8739, 0); +} + +static int wm8739_log_status(struct v4l2_subdev *sd) +{ + struct wm8739_state *state = to_state(sd); + + v4l2_info(sd, "Frequency: %u Hz\n", state->clock_freq); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops wm8739_ctrl_ops = { + .s_ctrl = wm8739_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops wm8739_core_ops = { + .log_status = wm8739_log_status, + .g_chip_ident = wm8739_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_audio_ops wm8739_audio_ops = { + .s_clock_freq = wm8739_s_clock_freq, +}; + +static const struct v4l2_subdev_ops wm8739_ops = { + .core = &wm8739_core_ops, + .audio = &wm8739_audio_ops, +}; + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static int wm8739_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct wm8739_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct wm8739_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &wm8739_ops); + v4l2_ctrl_handler_init(&state->hdl, 2); + state->volume = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 50736); + state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + state->balance = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_cluster(3, &state->volume); + + state->clock_freq = 48000; + + /* Initialize wm8739 */ + + /* reset */ + wm8739_write(sd, R15, 0x00); + /* filter setting, high path, offet clear */ + wm8739_write(sd, R5, 0x000); + /* ADC, OSC, Power Off mode Disable */ + wm8739_write(sd, R6, 0x000); + /* Digital Audio interface format: + Enable Master mode, 24 bit, MSB first/left justified */ + wm8739_write(sd, R7, 0x049); + /* sampling control: normal, 256fs, 48KHz sampling rate */ + wm8739_write(sd, R8, 0x000); + /* activate */ + wm8739_write(sd, R9, 0x001); + /* set volume/mute */ + v4l2_ctrl_handler_setup(&state->hdl); + return 0; +} + +static int wm8739_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct wm8739_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id wm8739_id[] = { + { "wm8739", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8739_id); + +static struct i2c_driver wm8739_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "wm8739", + }, + .probe = wm8739_probe, + .remove = wm8739_remove, + .id_table = wm8739_id, +}; + +module_i2c_driver(wm8739_driver); diff --git a/drivers/media/i2c/wm8775.c b/drivers/media/i2c/wm8775.c new file mode 100644 index 00000000..e5f3a78c --- /dev/null +++ b/drivers/media/i2c/wm8775.c @@ -0,0 +1,340 @@ +/* + * wm8775 - driver version 0.0.1 + * + * Copyright (C) 2004 Ulf Eklund + * + * Based on saa7115 driver + * + * Copyright (C) 2005 Hans Verkuil + * - Cleanup + * - V4L2 API update + * - sound fixes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("wm8775 driver"); +MODULE_AUTHOR("Ulf Eklund, Hans Verkuil"); +MODULE_LICENSE("GPL"); + + + +/* ----------------------------------------------------------------------- */ + +enum { + R7 = 7, R11 = 11, + R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R23 = 23, + TOT_REGS +}; + +#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */ +#define ALC_EN 0x100 /* R17: ALC enable */ + +struct wm8775_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_ctrl *mute; + struct v4l2_ctrl *vol; + struct v4l2_ctrl *bal; + struct v4l2_ctrl *loud; + u8 input; /* Last selected input (0-0xf) */ +}; + +static inline struct wm8775_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct wm8775_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct wm8775_state, hdl)->sd; +} + +static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + + if (reg < 0 || reg >= TOT_REGS) { + v4l2_err(sd, "Invalid register R%d\n", reg); + return -1; + } + + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) + return 0; + v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg); + return -1; +} + +static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly) +{ + struct wm8775_state *state = to_state(sd); + u8 vol_l, vol_r; + int muted = 0 != state->mute->val; + u16 volume = (u16)state->vol->val; + u16 balance = (u16)state->bal->val; + + /* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */ + vol_l = (min(65536 - balance, 32768) * volume) >> 23; + vol_r = (min(balance, (u16)32768) * volume) >> 23; + + /* Mute */ + if (muted || quietly) + wm8775_write(sd, R21, 0x0c0 | state->input); + + wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */ + wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */ + + /* Un-mute */ + if (!muted) + wm8775_write(sd, R21, state->input); +} + +static int wm8775_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct wm8775_state *state = to_state(sd); + + /* There are 4 inputs and one output. Zero or more inputs + are multiplexed together to the output. Hence there are + 16 combinations. + If only one input is active (the normal case) then the + input values 1, 2, 4 or 8 should be used. */ + if (input > 15) { + v4l2_err(sd, "Invalid input %d.\n", input); + return -EINVAL; + } + state->input = input; + if (v4l2_ctrl_g_ctrl(state->mute)) + return 0; + if (!v4l2_ctrl_g_ctrl(state->vol)) + return 0; + wm8775_set_audio(sd, 1); + return 0; +} + +static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BALANCE: + wm8775_set_audio(sd, 0); + return 0; + case V4L2_CID_AUDIO_LOUDNESS: + wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD); + return 0; + } + return -EINVAL; +} + +static int wm8775_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_WM8775, 0); +} + +static int wm8775_log_status(struct v4l2_subdev *sd) +{ + struct wm8775_state *state = to_state(sd); + + v4l2_info(sd, "Input: %d\n", state->input); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +static int wm8775_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *freq) +{ + wm8775_set_audio(sd, 0); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops wm8775_ctrl_ops = { + .s_ctrl = wm8775_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops wm8775_core_ops = { + .log_status = wm8775_log_status, + .g_chip_ident = wm8775_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_tuner_ops wm8775_tuner_ops = { + .s_frequency = wm8775_s_frequency, +}; + +static const struct v4l2_subdev_audio_ops wm8775_audio_ops = { + .s_routing = wm8775_s_routing, +}; + +static const struct v4l2_subdev_ops wm8775_ops = { + .core = &wm8775_core_ops, + .tuner = &wm8775_tuner_ops, + .audio = &wm8775_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static int wm8775_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct wm8775_state *state; + struct v4l2_subdev *sd; + int err; + bool is_nova_s = false; + + if (client->dev.platform_data) { + struct wm8775_platform_data *data = client->dev.platform_data; + is_nova_s = data->is_nova_s; + } + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct wm8775_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &wm8775_ops); + state->input = 2; + + v4l2_ctrl_handler_init(&state->hdl, 4); + state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/ + state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768); + state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1); + sd->ctrl_handler = &state->hdl; + err = state->hdl.error; + if (err) { + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + + /* Initialize wm8775 */ + + /* RESET */ + wm8775_write(sd, R23, 0x000); + /* Disable zero cross detect timeout */ + wm8775_write(sd, R7, 0x000); + /* HPF enable, left justified, 24-bit (Philips) mode */ + wm8775_write(sd, R11, 0x021); + /* Master mode, clock ratio 256fs */ + wm8775_write(sd, R12, 0x102); + /* Powered up */ + wm8775_write(sd, R13, 0x000); + + if (!is_nova_s) { + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(sd, R14, 0x1d4); + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(sd, R15, 0x1d4); + /* ALC Stereo, ALC target level -1dB FS max gain +8dB */ + wm8775_write(sd, R16, 0x1bf); + /* Enable gain control, use zero cross detection, + ALC hold time 42.6 ms */ + wm8775_write(sd, R17, 0x185); + } else { + /* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */ + wm8775_write(sd, R16, 0x1bb); + /* Set ALC mode and hold time */ + wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD); + } + /* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */ + wm8775_write(sd, R18, 0x0a2); + /* Enable noise gate, threshold -72dBfs */ + wm8775_write(sd, R19, 0x005); + if (!is_nova_s) { + /* Transient window 4ms, lower PGA gain limit -1dB */ + wm8775_write(sd, R20, 0x07a); + /* LRBOTH = 1, use input 2. */ + wm8775_write(sd, R21, 0x102); + } else { + /* Transient window 4ms, ALC min gain -5dB */ + wm8775_write(sd, R20, 0x0fb); + + wm8775_set_audio(sd, 1); /* set volume/mute/mux */ + } + return 0; +} + +static int wm8775_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct wm8775_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +static const struct i2c_device_id wm8775_id[] = { + { "wm8775", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8775_id); + +static struct i2c_driver wm8775_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "wm8775", + }, + .probe = wm8775_probe, + .remove = wm8775_remove, + .id_table = wm8775_id, +}; + +module_i2c_driver(wm8775_driver); diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c new file mode 100644 index 00000000..fdb5840f --- /dev/null +++ b/drivers/media/media-device.c @@ -0,0 +1,462 @@ +/* + * Media device + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart + * Sakari Ailus + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +/* ----------------------------------------------------------------------------- + * Userspace API + */ + +static int media_device_open(struct file *filp) +{ + return 0; +} + +static int media_device_close(struct file *filp) +{ + return 0; +} + +static int media_device_get_info(struct media_device *dev, + struct media_device_info __user *__info) +{ + struct media_device_info info; + + memset(&info, 0, sizeof(info)); + + strlcpy(info.driver, dev->dev->driver->name, sizeof(info.driver)); + strlcpy(info.model, dev->model, sizeof(info.model)); + strlcpy(info.serial, dev->serial, sizeof(info.serial)); + strlcpy(info.bus_info, dev->bus_info, sizeof(info.bus_info)); + + info.media_version = MEDIA_API_VERSION; + info.hw_revision = dev->hw_revision; + info.driver_version = dev->driver_version; + + if (copy_to_user(__info, &info, sizeof(*__info))) + return -EFAULT; + return 0; +} + +static struct media_entity *find_entity(struct media_device *mdev, u32 id) +{ + struct media_entity *entity; + int next = id & MEDIA_ENT_ID_FLAG_NEXT; + + id &= ~MEDIA_ENT_ID_FLAG_NEXT; + + spin_lock(&mdev->lock); + + media_device_for_each_entity(entity, mdev) { + if ((entity->id == id && !next) || + (entity->id > id && next)) { + spin_unlock(&mdev->lock); + return entity; + } + } + + spin_unlock(&mdev->lock); + + return NULL; +} + +static long media_device_enum_entities(struct media_device *mdev, + struct media_entity_desc __user *uent) +{ + struct media_entity *ent; + struct media_entity_desc u_ent; + + memset(&u_ent, 0, sizeof(u_ent)); + if (copy_from_user(&u_ent.id, &uent->id, sizeof(u_ent.id))) + return -EFAULT; + + ent = find_entity(mdev, u_ent.id); + + if (ent == NULL) + return -EINVAL; + + u_ent.id = ent->id; + if (ent->name) { + strncpy(u_ent.name, ent->name, sizeof(u_ent.name)); + u_ent.name[sizeof(u_ent.name) - 1] = '\0'; + } + u_ent.type = ent->type; + u_ent.revision = ent->revision; + u_ent.flags = ent->flags; + u_ent.group_id = ent->group_id; + u_ent.pads = ent->num_pads; + u_ent.links = ent->num_links - ent->num_backlinks; + memcpy(&u_ent.raw, &ent->info, sizeof(ent->info)); + if (copy_to_user(uent, &u_ent, sizeof(u_ent))) + return -EFAULT; + return 0; +} + +static void media_device_kpad_to_upad(const struct media_pad *kpad, + struct media_pad_desc *upad) +{ + upad->entity = kpad->entity->id; + upad->index = kpad->index; + upad->flags = kpad->flags; +} + +static long __media_device_enum_links(struct media_device *mdev, + struct media_links_enum *links) +{ + struct media_entity *entity; + + entity = find_entity(mdev, links->entity); + if (entity == NULL) + return -EINVAL; + + if (links->pads) { + unsigned int p; + + for (p = 0; p < entity->num_pads; p++) { + struct media_pad_desc pad; + media_device_kpad_to_upad(&entity->pads[p], &pad); + if (copy_to_user(&links->pads[p], &pad, sizeof(pad))) + return -EFAULT; + } + } + + if (links->links) { + struct media_link_desc __user *ulink; + unsigned int l; + + for (l = 0, ulink = links->links; l < entity->num_links; l++) { + struct media_link_desc link; + + /* Ignore backlinks. */ + if (entity->links[l].source->entity != entity) + continue; + + media_device_kpad_to_upad(entity->links[l].source, + &link.source); + media_device_kpad_to_upad(entity->links[l].sink, + &link.sink); + link.flags = entity->links[l].flags; + if (copy_to_user(ulink, &link, sizeof(*ulink))) + return -EFAULT; + ulink++; + } + } + + return 0; +} + +static long media_device_enum_links(struct media_device *mdev, + struct media_links_enum __user *ulinks) +{ + struct media_links_enum links; + int rval; + + if (copy_from_user(&links, ulinks, sizeof(links))) + return -EFAULT; + + rval = __media_device_enum_links(mdev, &links); + if (rval < 0) + return rval; + + if (copy_to_user(ulinks, &links, sizeof(*ulinks))) + return -EFAULT; + + return 0; +} + +static long media_device_setup_link(struct media_device *mdev, + struct media_link_desc __user *_ulink) +{ + struct media_link *link = NULL; + struct media_link_desc ulink; + struct media_entity *source; + struct media_entity *sink; + int ret; + + if (copy_from_user(&ulink, _ulink, sizeof(ulink))) + return -EFAULT; + + /* Find the source and sink entities and link. + */ + source = find_entity(mdev, ulink.source.entity); + sink = find_entity(mdev, ulink.sink.entity); + + if (source == NULL || sink == NULL) + return -EINVAL; + + if (ulink.source.index >= source->num_pads || + ulink.sink.index >= sink->num_pads) + return -EINVAL; + + link = media_entity_find_link(&source->pads[ulink.source.index], + &sink->pads[ulink.sink.index]); + if (link == NULL) + return -EINVAL; + + /* Setup the link on both entities. */ + ret = __media_entity_setup_link(link, ulink.flags); + + if (copy_to_user(_ulink, &ulink, sizeof(ulink))) + return -EFAULT; + + return ret; +} + +static long media_device_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct media_devnode *devnode = media_devnode_data(filp); + struct media_device *dev = to_media_device(devnode); + long ret; + + switch (cmd) { + case MEDIA_IOC_DEVICE_INFO: + ret = media_device_get_info(dev, + (struct media_device_info __user *)arg); + break; + + case MEDIA_IOC_ENUM_ENTITIES: + ret = media_device_enum_entities(dev, + (struct media_entity_desc __user *)arg); + break; + + case MEDIA_IOC_ENUM_LINKS: + mutex_lock(&dev->graph_mutex); + ret = media_device_enum_links(dev, + (struct media_links_enum __user *)arg); + mutex_unlock(&dev->graph_mutex); + break; + + case MEDIA_IOC_SETUP_LINK: + mutex_lock(&dev->graph_mutex); + ret = media_device_setup_link(dev, + (struct media_link_desc __user *)arg); + mutex_unlock(&dev->graph_mutex); + break; + + default: + ret = -ENOIOCTLCMD; + } + + return ret; +} + +#ifdef CONFIG_COMPAT + +struct media_links_enum32 { + __u32 entity; + compat_uptr_t pads; /* struct media_pad_desc * */ + compat_uptr_t links; /* struct media_link_desc * */ + __u32 reserved[4]; +}; + +static long media_device_enum_links32(struct media_device *mdev, + struct media_links_enum32 __user *ulinks) +{ + struct media_links_enum links; + compat_uptr_t pads_ptr, links_ptr; + + memset(&links, 0, sizeof(links)); + + if (get_user(links.entity, &ulinks->entity) + || get_user(pads_ptr, &ulinks->pads) + || get_user(links_ptr, &ulinks->links)) + return -EFAULT; + + links.pads = compat_ptr(pads_ptr); + links.links = compat_ptr(links_ptr); + + return __media_device_enum_links(mdev, &links); +} + +#define MEDIA_IOC_ENUM_LINKS32 _IOWR('|', 0x02, struct media_links_enum32) + +static long media_device_compat_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct media_devnode *devnode = media_devnode_data(filp); + struct media_device *dev = to_media_device(devnode); + long ret; + + switch (cmd) { + case MEDIA_IOC_DEVICE_INFO: + case MEDIA_IOC_ENUM_ENTITIES: + case MEDIA_IOC_SETUP_LINK: + return media_device_ioctl(filp, cmd, arg); + + case MEDIA_IOC_ENUM_LINKS32: + mutex_lock(&dev->graph_mutex); + ret = media_device_enum_links32(dev, + (struct media_links_enum32 __user *)arg); + mutex_unlock(&dev->graph_mutex); + break; + + default: + ret = -ENOIOCTLCMD; + } + + return ret; +} +#endif /* CONFIG_COMPAT */ + +static const struct media_file_operations media_device_fops = { + .owner = THIS_MODULE, + .open = media_device_open, + .ioctl = media_device_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = media_device_compat_ioctl, +#endif /* CONFIG_COMPAT */ + .release = media_device_close, +}; + +/* ----------------------------------------------------------------------------- + * sysfs + */ + +static ssize_t show_model(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct media_device *mdev = to_media_device(to_media_devnode(cd)); + + return sprintf(buf, "%.*s\n", (int)sizeof(mdev->model), mdev->model); +} + +static DEVICE_ATTR(model, S_IRUGO, show_model, NULL); + +/* ----------------------------------------------------------------------------- + * Registration/unregistration + */ + +static void media_device_release(struct media_devnode *mdev) +{ +} + +/** + * media_device_register - register a media device + * @mdev: The media device + * + * The caller is responsible for initializing the media device before + * registration. The following fields must be set: + * + * - dev must point to the parent device + * - model must be filled with the device model name + */ +int __must_check media_device_register(struct media_device *mdev) +{ + int ret; + + if (WARN_ON(mdev->dev == NULL || mdev->model[0] == 0)) + return -EINVAL; + + mdev->entity_id = 1; + INIT_LIST_HEAD(&mdev->entities); + spin_lock_init(&mdev->lock); + mutex_init(&mdev->graph_mutex); + + /* Register the device node. */ + mdev->devnode.fops = &media_device_fops; + mdev->devnode.parent = mdev->dev; + mdev->devnode.release = media_device_release; + ret = media_devnode_register(&mdev->devnode); + if (ret < 0) + return ret; + + ret = device_create_file(&mdev->devnode.dev, &dev_attr_model); + if (ret < 0) { + media_devnode_unregister(&mdev->devnode); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(media_device_register); + +/** + * media_device_unregister - unregister a media device + * @mdev: The media device + * + */ +void media_device_unregister(struct media_device *mdev) +{ + struct media_entity *entity; + struct media_entity *next; + + list_for_each_entry_safe(entity, next, &mdev->entities, list) + media_device_unregister_entity(entity); + + device_remove_file(&mdev->devnode.dev, &dev_attr_model); + media_devnode_unregister(&mdev->devnode); +} +EXPORT_SYMBOL_GPL(media_device_unregister); + +/** + * media_device_register_entity - Register an entity with a media device + * @mdev: The media device + * @entity: The entity + */ +int __must_check media_device_register_entity(struct media_device *mdev, + struct media_entity *entity) +{ + /* Warn if we apparently re-register an entity */ + WARN_ON(entity->parent != NULL); + entity->parent = mdev; + + spin_lock(&mdev->lock); + if (entity->id == 0) + entity->id = mdev->entity_id++; + else + mdev->entity_id = max(entity->id + 1, mdev->entity_id); + list_add_tail(&entity->list, &mdev->entities); + spin_unlock(&mdev->lock); + + return 0; +} +EXPORT_SYMBOL_GPL(media_device_register_entity); + +/** + * media_device_unregister_entity - Unregister an entity + * @entity: The entity + * + * If the entity has never been registered this function will return + * immediately. + */ +void media_device_unregister_entity(struct media_entity *entity) +{ + struct media_device *mdev = entity->parent; + + if (mdev == NULL) + return; + + spin_lock(&mdev->lock); + list_del(&entity->list); + spin_unlock(&mdev->lock); + entity->parent = NULL; +} +EXPORT_SYMBOL_GPL(media_device_unregister_entity); diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c new file mode 100644 index 00000000..fb0f0469 --- /dev/null +++ b/drivers/media/media-devnode.c @@ -0,0 +1,346 @@ +/* + * Media device node + * + * Copyright (C) 2010 Nokia Corporation + * + * Based on drivers/media/video/v4l2_dev.c code authored by + * Mauro Carvalho Chehab (version 2) + * Alan Cox, (version 1) + * + * Contacts: Laurent Pinchart + * Sakari Ailus + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * -- + * + * Generic media device node infrastructure to register and unregister + * character devices using a dynamic major number and proper reference + * counting. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MEDIA_NUM_DEVICES 256 +#define MEDIA_NAME "media" + +static dev_t media_dev_t; + +/* + * Active devices + */ +static DEFINE_MUTEX(media_devnode_lock); +static DECLARE_BITMAP(media_devnode_nums, MEDIA_NUM_DEVICES); + +/* Called when the last user of the media device exits. */ +static void media_devnode_release(struct device *cd) +{ + struct media_devnode *mdev = to_media_devnode(cd); + + mutex_lock(&media_devnode_lock); + + /* Delete the cdev on this minor as well */ + cdev_del(&mdev->cdev); + + /* Mark device node number as free */ + clear_bit(mdev->minor, media_devnode_nums); + + mutex_unlock(&media_devnode_lock); + + /* Release media_devnode and perform other cleanups as needed. */ + if (mdev->release) + mdev->release(mdev); +} + +static struct bus_type media_bus_type = { + .name = MEDIA_NAME, +}; + +static ssize_t media_read(struct file *filp, char __user *buf, + size_t sz, loff_t *off) +{ + struct media_devnode *mdev = media_devnode_data(filp); + + if (!mdev->fops->read) + return -EINVAL; + if (!media_devnode_is_registered(mdev)) + return -EIO; + return mdev->fops->read(filp, buf, sz, off); +} + +static ssize_t media_write(struct file *filp, const char __user *buf, + size_t sz, loff_t *off) +{ + struct media_devnode *mdev = media_devnode_data(filp); + + if (!mdev->fops->write) + return -EINVAL; + if (!media_devnode_is_registered(mdev)) + return -EIO; + return mdev->fops->write(filp, buf, sz, off); +} + +static unsigned int media_poll(struct file *filp, + struct poll_table_struct *poll) +{ + struct media_devnode *mdev = media_devnode_data(filp); + + if (!media_devnode_is_registered(mdev)) + return POLLERR | POLLHUP; + if (!mdev->fops->poll) + return DEFAULT_POLLMASK; + return mdev->fops->poll(filp, poll); +} + +static long +__media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg, + long (*ioctl_func)(struct file *filp, unsigned int cmd, + unsigned long arg)) +{ + struct media_devnode *mdev = media_devnode_data(filp); + + if (!ioctl_func) + return -ENOTTY; + + if (!media_devnode_is_registered(mdev)) + return -EIO; + + return ioctl_func(filp, cmd, arg); +} + +static long media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + struct media_devnode *mdev = media_devnode_data(filp); + + return __media_ioctl(filp, cmd, arg, mdev->fops->ioctl); +} + +#ifdef CONFIG_COMPAT + +static long media_compat_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct media_devnode *mdev = media_devnode_data(filp); + + return __media_ioctl(filp, cmd, arg, mdev->fops->compat_ioctl); +} + +#endif /* CONFIG_COMPAT */ + +/* Override for the open function */ +static int media_open(struct inode *inode, struct file *filp) +{ + struct media_devnode *mdev; + int ret; + + /* Check if the media device is available. This needs to be done with + * the media_devnode_lock held to prevent an open/unregister race: + * without the lock, the device could be unregistered and freed between + * the media_devnode_is_registered() and get_device() calls, leading to + * a crash. + */ + mutex_lock(&media_devnode_lock); + mdev = container_of(inode->i_cdev, struct media_devnode, cdev); + /* return ENXIO if the media device has been removed + already or if it is not registered anymore. */ + if (!media_devnode_is_registered(mdev)) { + mutex_unlock(&media_devnode_lock); + return -ENXIO; + } + /* and increase the device refcount */ + get_device(&mdev->dev); + mutex_unlock(&media_devnode_lock); + + filp->private_data = mdev; + + if (mdev->fops->open) { + ret = mdev->fops->open(filp); + if (ret) { + put_device(&mdev->dev); + return ret; + } + } + + return 0; +} + +/* Override for the release function */ +static int media_release(struct inode *inode, struct file *filp) +{ + struct media_devnode *mdev = media_devnode_data(filp); + int ret = 0; + + if (mdev->fops->release) + mdev->fops->release(filp); + + /* decrease the refcount unconditionally since the release() + return value is ignored. */ + put_device(&mdev->dev); + filp->private_data = NULL; + return ret; +} + +static const struct file_operations media_devnode_fops = { + .owner = THIS_MODULE, + .read = media_read, + .write = media_write, + .open = media_open, + .unlocked_ioctl = media_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = media_compat_ioctl, +#endif /* CONFIG_COMPAT */ + .release = media_release, + .poll = media_poll, + .llseek = no_llseek, +}; + +/** + * media_devnode_register - register a media device node + * @mdev: media device node structure we want to register + * + * The registration code assigns minor numbers and registers the new device node + * with the kernel. An error is returned if no free minor number can be found, + * or if the registration of the device node fails. + * + * Zero is returned on success. + * + * Note that if the media_devnode_register call fails, the release() callback of + * the media_devnode structure is *not* called, so the caller is responsible for + * freeing any data. + */ +int __must_check media_devnode_register(struct media_devnode *mdev) +{ + int minor; + int ret; + + /* Part 1: Find a free minor number */ + mutex_lock(&media_devnode_lock); + minor = find_next_zero_bit(media_devnode_nums, MEDIA_NUM_DEVICES, 0); + if (minor == MEDIA_NUM_DEVICES) { + mutex_unlock(&media_devnode_lock); + pr_err("could not get a free minor\n"); + return -ENFILE; + } + + set_bit(minor, media_devnode_nums); + mutex_unlock(&media_devnode_lock); + + mdev->minor = minor; + + /* Part 2: Initialize and register the character device */ + cdev_init(&mdev->cdev, &media_devnode_fops); + mdev->cdev.owner = mdev->fops->owner; + + ret = cdev_add(&mdev->cdev, MKDEV(MAJOR(media_dev_t), mdev->minor), 1); + if (ret < 0) { + pr_err("%s: cdev_add failed\n", __func__); + goto error; + } + + /* Part 3: Register the media device */ + mdev->dev.bus = &media_bus_type; + mdev->dev.devt = MKDEV(MAJOR(media_dev_t), mdev->minor); + mdev->dev.release = media_devnode_release; + if (mdev->parent) + mdev->dev.parent = mdev->parent; + dev_set_name(&mdev->dev, "media%d", mdev->minor); + ret = device_register(&mdev->dev); + if (ret < 0) { + pr_err("%s: device_register failed\n", __func__); + goto error; + } + + /* Part 4: Activate this minor. The char device can now be used. */ + set_bit(MEDIA_FLAG_REGISTERED, &mdev->flags); + + return 0; + +error: + cdev_del(&mdev->cdev); + clear_bit(mdev->minor, media_devnode_nums); + return ret; +} + +/** + * media_devnode_unregister - unregister a media device node + * @mdev: the device node to unregister + * + * This unregisters the passed device. Future open calls will be met with + * errors. + * + * This function can safely be called if the device node has never been + * registered or has already been unregistered. + */ +void media_devnode_unregister(struct media_devnode *mdev) +{ + /* Check if mdev was ever registered at all */ + if (!media_devnode_is_registered(mdev)) + return; + + mutex_lock(&media_devnode_lock); + clear_bit(MEDIA_FLAG_REGISTERED, &mdev->flags); + mutex_unlock(&media_devnode_lock); + device_unregister(&mdev->dev); +} + +/* + * Initialise media for linux + */ +static int __init media_devnode_init(void) +{ + int ret; + + pr_info("Linux media interface: v0.10\n"); + ret = alloc_chrdev_region(&media_dev_t, 0, MEDIA_NUM_DEVICES, + MEDIA_NAME); + if (ret < 0) { + pr_warn("unable to allocate major\n"); + return ret; + } + + ret = bus_register(&media_bus_type); + if (ret < 0) { + unregister_chrdev_region(media_dev_t, MEDIA_NUM_DEVICES); + pr_warn("bus_register failed\n"); + return -EIO; + } + + return 0; +} + +static void __exit media_devnode_exit(void) +{ + bus_unregister(&media_bus_type); + unregister_chrdev_region(media_dev_t, MEDIA_NUM_DEVICES); +} + +subsys_initcall(media_devnode_init); +module_exit(media_devnode_exit) + +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_DESCRIPTION("Device node registration for media drivers"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c new file mode 100644 index 00000000..e1cd1328 --- /dev/null +++ b/drivers/media/media-entity.c @@ -0,0 +1,593 @@ +/* + * Media entity + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart + * Sakari Ailus + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +/** + * media_entity_init - Initialize a media entity + * + * @num_pads: Total number of sink and source pads. + * @extra_links: Initial estimate of the number of extra links. + * @pads: Array of 'num_pads' pads. + * + * The total number of pads is an intrinsic property of entities known by the + * entity driver, while the total number of links depends on hardware design + * and is an extrinsic property unknown to the entity driver. However, in most + * use cases the entity driver can guess the number of links which can safely + * be assumed to be equal to or larger than the number of pads. + * + * For those reasons the links array can be preallocated based on the entity + * driver guess and will be reallocated later if extra links need to be + * created. + * + * This function allocates a links array with enough space to hold at least + * 'num_pads' + 'extra_links' elements. The media_entity::max_links field will + * be set to the number of allocated elements. + * + * The pads array is managed by the entity driver and passed to + * media_entity_init() where its pointer will be stored in the entity structure. + */ +int +media_entity_init(struct media_entity *entity, u16 num_pads, + struct media_pad *pads, u16 extra_links) +{ + struct media_link *links; + unsigned int max_links = num_pads + extra_links; + unsigned int i; + + links = kzalloc(max_links * sizeof(links[0]), GFP_KERNEL); + if (links == NULL) + return -ENOMEM; + + entity->group_id = 0; + entity->max_links = max_links; + entity->num_links = 0; + entity->num_backlinks = 0; + entity->num_pads = num_pads; + entity->pads = pads; + entity->links = links; + + for (i = 0; i < num_pads; i++) { + pads[i].entity = entity; + pads[i].index = i; + } + + return 0; +} +EXPORT_SYMBOL_GPL(media_entity_init); + +void +media_entity_cleanup(struct media_entity *entity) +{ + kfree(entity->links); +} +EXPORT_SYMBOL_GPL(media_entity_cleanup); + +/* ----------------------------------------------------------------------------- + * Graph traversal + */ + +static struct media_entity * +media_entity_other(struct media_entity *entity, struct media_link *link) +{ + if (link->source->entity == entity) + return link->sink->entity; + else + return link->source->entity; +} + +/* push an entity to traversal stack */ +static void stack_push(struct media_entity_graph *graph, + struct media_entity *entity) +{ + if (graph->top == MEDIA_ENTITY_ENUM_MAX_DEPTH - 1) { + WARN_ON(1); + return; + } + graph->top++; + graph->stack[graph->top].link = 0; + graph->stack[graph->top].entity = entity; +} + +static struct media_entity *stack_pop(struct media_entity_graph *graph) +{ + struct media_entity *entity; + + entity = graph->stack[graph->top].entity; + graph->top--; + + return entity; +} + +#define stack_peek(en) ((en)->stack[(en)->top - 1].entity) +#define link_top(en) ((en)->stack[(en)->top].link) +#define stack_top(en) ((en)->stack[(en)->top].entity) + +/** + * media_entity_graph_walk_start - Start walking the media graph at a given entity + * @graph: Media graph structure that will be used to walk the graph + * @entity: Starting entity + * + * This function initializes the graph traversal structure to walk the entities + * graph starting at the given entity. The traversal structure must not be + * modified by the caller during graph traversal. When done the structure can + * safely be freed. + */ +void media_entity_graph_walk_start(struct media_entity_graph *graph, + struct media_entity *entity) +{ + graph->top = 0; + graph->stack[graph->top].entity = NULL; + stack_push(graph, entity); +} +EXPORT_SYMBOL_GPL(media_entity_graph_walk_start); + +/** + * media_entity_graph_walk_next - Get the next entity in the graph + * @graph: Media graph structure + * + * Perform a depth-first traversal of the given media entities graph. + * + * The graph structure must have been previously initialized with a call to + * media_entity_graph_walk_start(). + * + * Return the next entity in the graph or NULL if the whole graph have been + * traversed. + */ +struct media_entity * +media_entity_graph_walk_next(struct media_entity_graph *graph) +{ + if (stack_top(graph) == NULL) + return NULL; + + /* + * Depth first search. Push entity to stack and continue from + * top of the stack until no more entities on the level can be + * found. + */ + while (link_top(graph) < stack_top(graph)->num_links) { + struct media_entity *entity = stack_top(graph); + struct media_link *link = &entity->links[link_top(graph)]; + struct media_entity *next; + + /* The link is not enabled so we do not follow. */ + if (!(link->flags & MEDIA_LNK_FL_ENABLED)) { + link_top(graph)++; + continue; + } + + /* Get the entity in the other end of the link . */ + next = media_entity_other(entity, link); + + /* Was it the entity we came here from? */ + if (next == stack_peek(graph)) { + link_top(graph)++; + continue; + } + + /* Push the new entity to stack and start over. */ + link_top(graph)++; + stack_push(graph, next); + } + + return stack_pop(graph); +} +EXPORT_SYMBOL_GPL(media_entity_graph_walk_next); + +/* ----------------------------------------------------------------------------- + * Pipeline management + */ + +/** + * media_entity_pipeline_start - Mark a pipeline as streaming + * @entity: Starting entity + * @pipe: Media pipeline to be assigned to all entities in the pipeline. + * + * Mark all entities connected to a given entity through enabled links, either + * directly or indirectly, as streaming. The given pipeline object is assigned to + * every entity in the pipeline and stored in the media_entity pipe field. + * + * Calls to this function can be nested, in which case the same number of + * media_entity_pipeline_stop() calls will be required to stop streaming. The + * pipeline pointer must be identical for all nested calls to + * media_entity_pipeline_start(). + */ +__must_check int media_entity_pipeline_start(struct media_entity *entity, + struct media_pipeline *pipe) +{ + struct media_device *mdev = entity->parent; + struct media_entity_graph graph; + struct media_entity *entity_err = entity; + int ret; + + mutex_lock(&mdev->graph_mutex); + + media_entity_graph_walk_start(&graph, entity); + + while ((entity = media_entity_graph_walk_next(&graph))) { + unsigned int i; + + entity->stream_count++; + WARN_ON(entity->pipe && entity->pipe != pipe); + entity->pipe = pipe; + + /* Already streaming --- no need to check. */ + if (entity->stream_count > 1) + continue; + + if (!entity->ops || !entity->ops->link_validate) + continue; + + for (i = 0; i < entity->num_links; i++) { + struct media_link *link = &entity->links[i]; + + /* Is this pad part of an enabled link? */ + if (!(link->flags & MEDIA_LNK_FL_ENABLED)) + continue; + + /* Are we the sink or not? */ + if (link->sink->entity != entity) + continue; + + ret = entity->ops->link_validate(link); + if (ret < 0 && ret != -ENOIOCTLCMD) + goto error; + } + } + + mutex_unlock(&mdev->graph_mutex); + + return 0; + +error: + /* + * Link validation on graph failed. We revert what we did and + * return the error. + */ + media_entity_graph_walk_start(&graph, entity_err); + + while ((entity_err = media_entity_graph_walk_next(&graph))) { + entity_err->stream_count--; + if (entity_err->stream_count == 0) + entity_err->pipe = NULL; + + /* + * We haven't increased stream_count further than this + * so we quit here. + */ + if (entity_err == entity) + break; + } + + mutex_unlock(&mdev->graph_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(media_entity_pipeline_start); + +/** + * media_entity_pipeline_stop - Mark a pipeline as not streaming + * @entity: Starting entity + * + * Mark all entities connected to a given entity through enabled links, either + * directly or indirectly, as not streaming. The media_entity pipe field is + * reset to NULL. + * + * If multiple calls to media_entity_pipeline_start() have been made, the same + * number of calls to this function are required to mark the pipeline as not + * streaming. + */ +void media_entity_pipeline_stop(struct media_entity *entity) +{ + struct media_device *mdev = entity->parent; + struct media_entity_graph graph; + + mutex_lock(&mdev->graph_mutex); + + media_entity_graph_walk_start(&graph, entity); + + while ((entity = media_entity_graph_walk_next(&graph))) { + entity->stream_count--; + if (entity->stream_count == 0) + entity->pipe = NULL; + } + + mutex_unlock(&mdev->graph_mutex); +} +EXPORT_SYMBOL_GPL(media_entity_pipeline_stop); + +/* ----------------------------------------------------------------------------- + * Module use count + */ + +/* + * media_entity_get - Get a reference to the parent module + * @entity: The entity + * + * Get a reference to the parent media device module. + * + * The function will return immediately if @entity is NULL. + * + * Return a pointer to the entity on success or NULL on failure. + */ +struct media_entity *media_entity_get(struct media_entity *entity) +{ + if (entity == NULL) + return NULL; + + if (entity->parent->dev && + !try_module_get(entity->parent->dev->driver->owner)) + return NULL; + + return entity; +} +EXPORT_SYMBOL_GPL(media_entity_get); + +/* + * media_entity_put - Release the reference to the parent module + * @entity: The entity + * + * Release the reference count acquired by media_entity_get(). + * + * The function will return immediately if @entity is NULL. + */ +void media_entity_put(struct media_entity *entity) +{ + if (entity == NULL) + return; + + if (entity->parent->dev) + module_put(entity->parent->dev->driver->owner); +} +EXPORT_SYMBOL_GPL(media_entity_put); + +/* ----------------------------------------------------------------------------- + * Links management + */ + +static struct media_link *media_entity_add_link(struct media_entity *entity) +{ + if (entity->num_links >= entity->max_links) { + struct media_link *links = entity->links; + unsigned int max_links = entity->max_links + 2; + unsigned int i; + + links = krealloc(links, max_links * sizeof(*links), GFP_KERNEL); + if (links == NULL) + return NULL; + + for (i = 0; i < entity->num_links; i++) + links[i].reverse->reverse = &links[i]; + + entity->max_links = max_links; + entity->links = links; + } + + return &entity->links[entity->num_links++]; +} + +int +media_entity_create_link(struct media_entity *source, u16 source_pad, + struct media_entity *sink, u16 sink_pad, u32 flags) +{ + struct media_link *link; + struct media_link *backlink; + + BUG_ON(source == NULL || sink == NULL); + BUG_ON(source_pad >= source->num_pads); + BUG_ON(sink_pad >= sink->num_pads); + + link = media_entity_add_link(source); + if (link == NULL) + return -ENOMEM; + + link->source = &source->pads[source_pad]; + link->sink = &sink->pads[sink_pad]; + link->flags = flags; + + /* Create the backlink. Backlinks are used to help graph traversal and + * are not reported to userspace. + */ + backlink = media_entity_add_link(sink); + if (backlink == NULL) { + source->num_links--; + return -ENOMEM; + } + + backlink->source = &source->pads[source_pad]; + backlink->sink = &sink->pads[sink_pad]; + backlink->flags = flags; + + link->reverse = backlink; + backlink->reverse = link; + + sink->num_backlinks++; + + return 0; +} +EXPORT_SYMBOL_GPL(media_entity_create_link); + +static int __media_entity_setup_link_notify(struct media_link *link, u32 flags) +{ + int ret; + + /* Notify both entities. */ + ret = media_entity_call(link->source->entity, link_setup, + link->source, link->sink, flags); + if (ret < 0 && ret != -ENOIOCTLCMD) + return ret; + + ret = media_entity_call(link->sink->entity, link_setup, + link->sink, link->source, flags); + if (ret < 0 && ret != -ENOIOCTLCMD) { + media_entity_call(link->source->entity, link_setup, + link->source, link->sink, link->flags); + return ret; + } + + link->flags = flags; + link->reverse->flags = link->flags; + + return 0; +} + +/** + * __media_entity_setup_link - Configure a media link + * @link: The link being configured + * @flags: Link configuration flags + * + * The bulk of link setup is handled by the two entities connected through the + * link. This function notifies both entities of the link configuration change. + * + * If the link is immutable or if the current and new configuration are + * identical, return immediately. + * + * The user is expected to hold link->source->parent->mutex. If not, + * media_entity_setup_link() should be used instead. + */ +int __media_entity_setup_link(struct media_link *link, u32 flags) +{ + const u32 mask = MEDIA_LNK_FL_ENABLED; + struct media_device *mdev; + struct media_entity *source, *sink; + int ret = -EBUSY; + + if (link == NULL) + return -EINVAL; + + /* The non-modifiable link flags must not be modified. */ + if ((link->flags & ~mask) != (flags & ~mask)) + return -EINVAL; + + if (link->flags & MEDIA_LNK_FL_IMMUTABLE) + return link->flags == flags ? 0 : -EINVAL; + + if (link->flags == flags) + return 0; + + source = link->source->entity; + sink = link->sink->entity; + + if (!(link->flags & MEDIA_LNK_FL_DYNAMIC) && + (source->stream_count || sink->stream_count)) + return -EBUSY; + + mdev = source->parent; + + if ((flags & MEDIA_LNK_FL_ENABLED) && mdev->link_notify) { + ret = mdev->link_notify(link->source, link->sink, + MEDIA_LNK_FL_ENABLED); + if (ret < 0) + return ret; + } + + ret = __media_entity_setup_link_notify(link, flags); + if (ret < 0) + goto err; + + if (!(flags & MEDIA_LNK_FL_ENABLED) && mdev->link_notify) + mdev->link_notify(link->source, link->sink, 0); + + return 0; + +err: + if ((flags & MEDIA_LNK_FL_ENABLED) && mdev->link_notify) + mdev->link_notify(link->source, link->sink, 0); + + return ret; +} + +int media_entity_setup_link(struct media_link *link, u32 flags) +{ + int ret; + + mutex_lock(&link->source->entity->parent->graph_mutex); + ret = __media_entity_setup_link(link, flags); + mutex_unlock(&link->source->entity->parent->graph_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(media_entity_setup_link); + +/** + * media_entity_find_link - Find a link between two pads + * @source: Source pad + * @sink: Sink pad + * + * Return a pointer to the link between the two entities. If no such link + * exists, return NULL. + */ +struct media_link * +media_entity_find_link(struct media_pad *source, struct media_pad *sink) +{ + struct media_link *link; + unsigned int i; + + for (i = 0; i < source->entity->num_links; ++i) { + link = &source->entity->links[i]; + + if (link->source->entity == source->entity && + link->source->index == source->index && + link->sink->entity == sink->entity && + link->sink->index == sink->index) + return link; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(media_entity_find_link); + +/** + * media_entity_remote_source - Find the source pad at the remote end of a link + * @pad: Sink pad at the local end of the link + * + * Search for a remote source pad connected to the given sink pad by iterating + * over all links originating or terminating at that pad until an enabled link + * is found. + * + * Return a pointer to the pad at the remote end of the first found enabled + * link, or NULL if no enabled link has been found. + */ +struct media_pad *media_entity_remote_source(struct media_pad *pad) +{ + unsigned int i; + + for (i = 0; i < pad->entity->num_links; i++) { + struct media_link *link = &pad->entity->links[i]; + + if (!(link->flags & MEDIA_LNK_FL_ENABLED)) + continue; + + if (link->source == pad) + return link->sink; + + if (link->sink == pad) + return link->source; + } + + return NULL; + +} +EXPORT_SYMBOL_GPL(media_entity_remote_source); diff --git a/drivers/media/mmc/Kconfig b/drivers/media/mmc/Kconfig new file mode 100644 index 00000000..8c30ada2 --- /dev/null +++ b/drivers/media/mmc/Kconfig @@ -0,0 +1,2 @@ +comment "Supported MMC/SDIO adapters" +source "drivers/media/mmc/siano/Kconfig" diff --git a/drivers/media/mmc/Makefile b/drivers/media/mmc/Makefile new file mode 100644 index 00000000..31e297a2 --- /dev/null +++ b/drivers/media/mmc/Makefile @@ -0,0 +1 @@ +obj-y += siano/ diff --git a/drivers/media/mmc/siano/Kconfig b/drivers/media/mmc/siano/Kconfig new file mode 100644 index 00000000..aa05ad3c --- /dev/null +++ b/drivers/media/mmc/siano/Kconfig @@ -0,0 +1,11 @@ +# +# Siano Mobile Silicon Digital TV device configuration +# + +config SMS_SDIO_DRV + tristate "Siano SMS1xxx based MDTV via SDIO interface" + depends on DVB_CORE && HAS_DMA + depends on MMC + select MEDIA_COMMON_OPTIONS + ---help--- + Choose if you would like to have Siano's support for SDIO interface diff --git a/drivers/media/mmc/siano/Makefile b/drivers/media/mmc/siano/Makefile new file mode 100644 index 00000000..0e01f973 --- /dev/null +++ b/drivers/media/mmc/siano/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o + +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/common/siano +ccflags-y += $(extra-cflags-y) $(extra-cflags-m) + diff --git a/drivers/media/mmc/siano/smssdio.c b/drivers/media/mmc/siano/smssdio.c new file mode 100644 index 00000000..912c2814 --- /dev/null +++ b/drivers/media/mmc/siano/smssdio.c @@ -0,0 +1,378 @@ +/* + * smssdio.c - Siano 1xxx SDIO interface driver + * + * Copyright 2008 Pierre Ossman + * + * Based on code by Siano Mobile Silicon, Inc., + * Copyright (C) 2006-2008, Uri Shkolnik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * + * This hardware is a bit odd in that all transfers should be done + * to/from the SMSSDIO_DATA register, yet the "increase address" bit + * always needs to be set. + * + * Also, buffers from the card are always aligned to 128 byte + * boundaries. + */ + +/* + * General cleanup notes: + * + * - only typedefs should be name *_t + * + * - use ERR_PTR and friends for smscore_register_device() + * + * - smscore_getbuffer should zero fields + * + * Fix stop command + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "smscoreapi.h" +#include "sms-cards.h" +#include "smsendian.h" + +/* Registers */ + +#define SMSSDIO_DATA 0x00 +#define SMSSDIO_INT 0x04 +#define SMSSDIO_BLOCK_SIZE 128 + +static const struct sdio_device_id smssdio_ids[] = { + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR), + .driver_data = SMS1XXX_BOARD_SIANO_STELLAR}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0), + .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0), + .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0), + .driver_data = SMS1XXX_BOARD_SIANO_VEGA}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE), + .driver_data = SMS1XXX_BOARD_SIANO_VEGA}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x302), + .driver_data = SMS1XXX_BOARD_SIANO_MING}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x500), + .driver_data = SMS1XXX_BOARD_SIANO_PELE}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x600), + .driver_data = SMS1XXX_BOARD_SIANO_RIO}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x700), + .driver_data = SMS1XXX_BOARD_SIANO_DENVER_2160}, + {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x800), + .driver_data = SMS1XXX_BOARD_SIANO_DENVER_1530}, + { /* end: all zeroes */ }, +}; + +MODULE_DEVICE_TABLE(sdio, smssdio_ids); + +struct smssdio_device { + struct sdio_func *func; + + struct smscore_device_t *coredev; + + struct smscore_buffer_t *split_cb; +}; + +/*******************************************************************/ +/* Siano core callbacks */ +/*******************************************************************/ + +static int smssdio_sendrequest(void *context, void *buffer, size_t size) +{ + int ret = 0; + struct smssdio_device *smsdev; + + smsdev = context; + + sdio_claim_host(smsdev->func); + + smsendian_handle_tx_message((struct sms_msg_data *) buffer); + while (size >= smsdev->func->cur_blksize) { + ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA, + buffer, smsdev->func->cur_blksize); + if (ret) + goto out; + + buffer += smsdev->func->cur_blksize; + size -= smsdev->func->cur_blksize; + } + + if (size) { + ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA, + buffer, size); + } + +out: + sdio_release_host(smsdev->func); + + return ret; +} + +/*******************************************************************/ +/* SDIO callbacks */ +/*******************************************************************/ + +static void smssdio_interrupt(struct sdio_func *func) +{ + int ret; + + struct smssdio_device *smsdev; + struct smscore_buffer_t *cb; + struct sms_msg_hdr *hdr; + size_t size; + + smsdev = sdio_get_drvdata(func); + + /* + * The interrupt register has no defined meaning. It is just + * a way of turning of the level triggered interrupt. + */ + (void)sdio_readb(func, SMSSDIO_INT, &ret); + if (ret) { + sms_err("Unable to read interrupt register!\n"); + return; + } + + if (smsdev->split_cb == NULL) { + cb = smscore_getbuffer(smsdev->coredev); + if (!cb) { + sms_err("Unable to allocate data buffer!\n"); + return; + } + + ret = sdio_memcpy_fromio(smsdev->func, + cb->p, + SMSSDIO_DATA, + SMSSDIO_BLOCK_SIZE); + if (ret) { + sms_err("Error %d reading initial block!\n", ret); + return; + } + + hdr = cb->p; + + if (hdr->msg_flags & MSG_HDR_FLAG_SPLIT_MSG) { + smsdev->split_cb = cb; + return; + } + + if (hdr->msg_length > smsdev->func->cur_blksize) + size = hdr->msg_length - smsdev->func->cur_blksize; + else + size = 0; + } else { + cb = smsdev->split_cb; + hdr = cb->p; + + size = hdr->msg_length - sizeof(struct sms_msg_hdr); + + smsdev->split_cb = NULL; + } + + if (size) { + void *buffer; + + buffer = cb->p + (hdr->msg_length - size); + size = ALIGN(size, SMSSDIO_BLOCK_SIZE); + + BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE); + + /* + * First attempt to transfer all of it in one go... + */ + ret = sdio_memcpy_fromio(smsdev->func, + buffer, + SMSSDIO_DATA, + size); + if (ret && ret != -EINVAL) { + smscore_putbuffer(smsdev->coredev, cb); + sms_err("Error %d reading data from card!\n", ret); + return; + } + + /* + * ..then fall back to one block at a time if that is + * not possible... + * + * (we have to do this manually because of the + * problem with the "increase address" bit) + */ + if (ret == -EINVAL) { + while (size) { + ret = sdio_memcpy_fromio(smsdev->func, + buffer, SMSSDIO_DATA, + smsdev->func->cur_blksize); + if (ret) { + smscore_putbuffer(smsdev->coredev, cb); + sms_err("Error %d reading " + "data from card!\n", ret); + return; + } + + buffer += smsdev->func->cur_blksize; + if (size > smsdev->func->cur_blksize) + size -= smsdev->func->cur_blksize; + else + size = 0; + } + } + } + + cb->size = hdr->msg_length; + cb->offset = 0; + + smsendian_handle_rx_message((struct sms_msg_data *) cb->p); + smscore_onresponse(smsdev->coredev, cb); +} + +static int smssdio_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + int ret; + + int board_id; + struct smssdio_device *smsdev; + struct smsdevice_params_t params; + + board_id = id->driver_data; + + smsdev = kzalloc(sizeof(struct smssdio_device), GFP_KERNEL); + if (!smsdev) + return -ENOMEM; + + smsdev->func = func; + + memset(¶ms, 0, sizeof(struct smsdevice_params_t)); + + params.device = &func->dev; + params.buffer_size = 0x5000; /* ?? */ + params.num_buffers = 22; /* ?? */ + params.context = smsdev; + + snprintf(params.devpath, sizeof(params.devpath), + "sdio\\%s", sdio_func_id(func)); + + params.sendrequest_handler = smssdio_sendrequest; + + params.device_type = sms_get_board(board_id)->type; + + if (params.device_type != SMS_STELLAR) + params.flags |= SMS_DEVICE_FAMILY2; + else { + /* + * FIXME: Stellar needs special handling... + */ + ret = -ENODEV; + goto free; + } + + ret = smscore_register_device(¶ms, &smsdev->coredev); + if (ret < 0) + goto free; + + smscore_set_board_id(smsdev->coredev, board_id); + + sdio_claim_host(func); + + ret = sdio_enable_func(func); + if (ret) + goto release; + + ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE); + if (ret) + goto disable; + + ret = sdio_claim_irq(func, smssdio_interrupt); + if (ret) + goto disable; + + sdio_set_drvdata(func, smsdev); + + sdio_release_host(func); + + ret = smscore_start_device(smsdev->coredev); + if (ret < 0) + goto reclaim; + + return 0; + +reclaim: + sdio_claim_host(func); + sdio_release_irq(func); +disable: + sdio_disable_func(func); +release: + sdio_release_host(func); + smscore_unregister_device(smsdev->coredev); +free: + kfree(smsdev); + + return ret; +} + +static void smssdio_remove(struct sdio_func *func) +{ + struct smssdio_device *smsdev; + + smsdev = sdio_get_drvdata(func); + + /* FIXME: racy! */ + if (smsdev->split_cb) + smscore_putbuffer(smsdev->coredev, smsdev->split_cb); + + smscore_unregister_device(smsdev->coredev); + + sdio_claim_host(func); + sdio_release_irq(func); + sdio_disable_func(func); + sdio_release_host(func); + + kfree(smsdev); +} + +static struct sdio_driver smssdio_driver = { + .name = "smssdio", + .id_table = smssdio_ids, + .probe = smssdio_probe, + .remove = smssdio_remove, +}; + +/*******************************************************************/ +/* Module functions */ +/*******************************************************************/ + +static int __init smssdio_module_init(void) +{ + int ret = 0; + + printk(KERN_INFO "smssdio: Siano SMS1xxx SDIO driver\n"); + printk(KERN_INFO "smssdio: Copyright Pierre Ossman\n"); + + ret = sdio_register_driver(&smssdio_driver); + + return ret; +} + +static void __exit smssdio_module_exit(void) +{ + sdio_unregister_driver(&smssdio_driver); +} + +module_init(smssdio_module_init); +module_exit(smssdio_module_exit); + +MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver"); +MODULE_AUTHOR("Pierre Ossman"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/parport/Kconfig b/drivers/media/parport/Kconfig new file mode 100644 index 00000000..948c981d --- /dev/null +++ b/drivers/media/parport/Kconfig @@ -0,0 +1,53 @@ +menuconfig MEDIA_PARPORT_SUPPORT + bool "ISA and parallel port devices" + depends on (ISA || PARPORT) && MEDIA_CAMERA_SUPPORT + help + Enables drivers for ISA and parallel port bus. If you + need media drivers using those legacy buses, say Y. + +if MEDIA_PARPORT_SUPPORT +config VIDEO_BWQCAM + tristate "Quickcam BW Video For Linux" + depends on PARPORT && VIDEO_V4L2 + select VIDEOBUF2_VMALLOC + help + Say Y have if you the black and white version of the QuickCam + camera. See the next option for the color version. + + To compile this driver as a module, choose M here: the + module will be called bw-qcam. + +config VIDEO_CQCAM + tristate "QuickCam Colour Video For Linux" + depends on PARPORT && VIDEO_V4L2 + help + This is the video4linux driver for the colour version of the + Connectix QuickCam. If you have one of these cameras, say Y here, + otherwise say N. This driver does not work with the original + monochrome QuickCam, QuickCam VC or QuickClip. It is also available + as a module (c-qcam). + Read for more information. + +config VIDEO_PMS + tristate "Mediavision Pro Movie Studio Video For Linux" + depends on ISA && VIDEO_V4L2 + help + Say Y if you have the ISA Mediavision Pro Movie Studio + capture card. + + To compile this driver as a module, choose M here: the + module will be called pms. + +config VIDEO_W9966 + tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" + depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 + help + Video4linux driver for Winbond's w9966 based Webcams. + Currently tested with the LifeView FlyCam Supra. + If you have one of these cameras, say Y here + otherwise say N. + This driver is also available as a module (w9966). + + Check out for more + information. +endif diff --git a/drivers/media/parport/Makefile b/drivers/media/parport/Makefile new file mode 100644 index 00000000..4eea06d7 --- /dev/null +++ b/drivers/media/parport/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o +obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o +obj-$(CONFIG_VIDEO_W9966) += w9966.o +obj-$(CONFIG_VIDEO_PMS) += pms.o diff --git a/drivers/media/parport/bw-qcam.c b/drivers/media/parport/bw-qcam.c new file mode 100644 index 00000000..06231b85 --- /dev/null +++ b/drivers/media/parport/bw-qcam.c @@ -0,0 +1,1176 @@ +/* + * QuickCam Driver For Video4Linux. + * + * Video4Linux conversion work by Alan Cox. + * Parport compatibility by Phil Blundell. + * Busy loop avoidance by Mark Cooke. + * + * Module parameters: + * + * maxpoll=<1 - 5000> + * + * When polling the QuickCam for a response, busy-wait for a + * maximum of this many loops. The default of 250 gives little + * impact on interactive response. + * + * NOTE: If this parameter is set too high, the processor + * will busy wait until this loop times out, and then + * slowly poll for a further 5 seconds before failing + * the transaction. You have been warned. + * + * yieldlines=<1 - 250> + * + * When acquiring a frame from the camera, the data gathering + * loop will yield back to the scheduler after completing + * this many lines. The default of 4 provides a trade-off + * between increased frame acquisition time and impact on + * interactive response. + */ + +/* qcam-lib.c -- Library for programming with the Connectix QuickCam. + * See the included documentation for usage instructions and details + * of the protocol involved. */ + + +/* Version 0.5, August 4, 1996 */ +/* Version 0.7, August 27, 1996 */ +/* Version 0.9, November 17, 1996 */ + + +/****************************************************************** + +Copyright (C) 1996 by Scott Laird + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice shall be +included in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL SCOTT LAIRD BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +******************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* One from column A... */ +#define QC_NOTSET 0 +#define QC_UNIDIR 1 +#define QC_BIDIR 2 +#define QC_SERIAL 3 + +/* ... and one from column B */ +#define QC_ANY 0x00 +#define QC_FORCE_UNIDIR 0x10 +#define QC_FORCE_BIDIR 0x20 +#define QC_FORCE_SERIAL 0x30 +/* in the port_mode member */ + +#define QC_MODE_MASK 0x07 +#define QC_FORCE_MASK 0x70 + +#define MAX_HEIGHT 243 +#define MAX_WIDTH 336 + +/* Bit fields for status flags */ +#define QC_PARAM_CHANGE 0x01 /* Camera status change has occurred */ + +struct qcam { + struct v4l2_device v4l2_dev; + struct video_device vdev; + struct v4l2_ctrl_handler hdl; + struct vb2_queue vb_vidq; + struct pardevice *pdev; + struct parport *pport; + struct mutex lock; + struct mutex queue_lock; + int width, height; + int bpp; + int mode; + int contrast, brightness, whitebal; + int port_mode; + int transfer_scale; + int top, left; + int status; + unsigned int saved_bits; + unsigned long in_use; +}; + +static unsigned int maxpoll = 250; /* Maximum busy-loop count for qcam I/O */ +static unsigned int yieldlines = 4; /* Yield after this many during capture */ +static int video_nr = -1; +static unsigned int force_init; /* Whether to probe aggressively */ + +module_param(maxpoll, int, 0); +module_param(yieldlines, int, 0); +module_param(video_nr, int, 0); + +/* Set force_init=1 to avoid detection by polling status register and + * immediately attempt to initialize qcam */ +module_param(force_init, int, 0); + +#define MAX_CAMS 4 +static struct qcam *qcams[MAX_CAMS]; +static unsigned int num_cams; + +static inline int read_lpstatus(struct qcam *q) +{ + return parport_read_status(q->pport); +} + +static inline int read_lpdata(struct qcam *q) +{ + return parport_read_data(q->pport); +} + +static inline void write_lpdata(struct qcam *q, int d) +{ + parport_write_data(q->pport, d); +} + +static void write_lpcontrol(struct qcam *q, int d) +{ + if (d & 0x20) { + /* Set bidirectional mode to reverse (data in) */ + parport_data_reverse(q->pport); + } else { + /* Set bidirectional mode to forward (data out) */ + parport_data_forward(q->pport); + } + + /* Now issue the regular port command, but strip out the + * direction flag */ + d &= ~0x20; + parport_write_control(q->pport, d); +} + + +/* qc_waithand busy-waits for a handshake signal from the QuickCam. + * Almost all communication with the camera requires handshaking. */ + +static int qc_waithand(struct qcam *q, int val) +{ + int status; + int runs = 0; + + if (val) { + while (!((status = read_lpstatus(q)) & 8)) { + /* 1000 is enough spins on the I/O for all normal + cases, at that point we start to poll slowly + until the camera wakes up. However, we are + busy blocked until the camera responds, so + setting it lower is much better for interactive + response. */ + + if (runs++ > maxpoll) + msleep_interruptible(5); + if (runs > (maxpoll + 1000)) /* 5 seconds */ + return -1; + } + } else { + while (((status = read_lpstatus(q)) & 8)) { + /* 1000 is enough spins on the I/O for all normal + cases, at that point we start to poll slowly + until the camera wakes up. However, we are + busy blocked until the camera responds, so + setting it lower is much better for interactive + response. */ + + if (runs++ > maxpoll) + msleep_interruptible(5); + if (runs++ > (maxpoll + 1000)) /* 5 seconds */ + return -1; + } + } + + return status; +} + +/* Waithand2 is used when the qcam is in bidirectional mode, and the + * handshaking signal is CamRdy2 (bit 0 of data reg) instead of CamRdy1 + * (bit 3 of status register). It also returns the last value read, + * since this data is useful. */ + +static unsigned int qc_waithand2(struct qcam *q, int val) +{ + unsigned int status; + int runs = 0; + + do { + status = read_lpdata(q); + /* 1000 is enough spins on the I/O for all normal + cases, at that point we start to poll slowly + until the camera wakes up. However, we are + busy blocked until the camera responds, so + setting it lower is much better for interactive + response. */ + + if (runs++ > maxpoll) + msleep_interruptible(5); + if (runs++ > (maxpoll + 1000)) /* 5 seconds */ + return 0; + } while ((status & 1) != val); + + return status; +} + +/* qc_command is probably a bit of a misnomer -- it's used to send + * bytes *to* the camera. Generally, these bytes are either commands + * or arguments to commands, so the name fits, but it still bugs me a + * bit. See the documentation for a list of commands. */ + +static int qc_command(struct qcam *q, int command) +{ + int n1, n2; + int cmd; + + write_lpdata(q, command); + write_lpcontrol(q, 6); + + n1 = qc_waithand(q, 1); + + write_lpcontrol(q, 0xe); + n2 = qc_waithand(q, 0); + + cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4); + return cmd; +} + +static int qc_readparam(struct qcam *q) +{ + int n1, n2; + int cmd; + + write_lpcontrol(q, 6); + n1 = qc_waithand(q, 1); + + write_lpcontrol(q, 0xe); + n2 = qc_waithand(q, 0); + + cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4); + return cmd; +} + + +/* Try to detect a QuickCam. It appears to flash the upper 4 bits of + the status register at 5-10 Hz. This is only used in the autoprobe + code. Be aware that this isn't the way Connectix detects the + camera (they send a reset and try to handshake), but this should be + almost completely safe, while their method screws up my printer if + I plug it in before the camera. */ + +static int qc_detect(struct qcam *q) +{ + int reg, lastreg; + int count = 0; + int i; + + if (force_init) + return 1; + + lastreg = reg = read_lpstatus(q) & 0xf0; + + for (i = 0; i < 500; i++) { + reg = read_lpstatus(q) & 0xf0; + if (reg != lastreg) + count++; + lastreg = reg; + mdelay(2); + } + + +#if 0 + /* Force camera detection during testing. Sometimes the camera + won't be flashing these bits. Possibly unloading the module + in the middle of a grab? Or some timeout condition? + I've seen this parameter as low as 19 on my 450Mhz box - mpc */ + printk(KERN_DEBUG "Debugging: QCam detection counter <30-200 counts as detected>: %d\n", count); + return 1; +#endif + + /* Be (even more) liberal in what you accept... */ + + if (count > 20 && count < 400) { + return 1; /* found */ + } else { + printk(KERN_ERR "No Quickcam found on port %s\n", + q->pport->name); + printk(KERN_DEBUG "Quickcam detection counter: %u\n", count); + return 0; /* not found */ + } +} + +/* Decide which scan mode to use. There's no real requirement that + * the scanmode match the resolution in q->height and q-> width -- the + * camera takes the picture at the resolution specified in the + * "scanmode" and then returns the image at the resolution specified + * with the resolution commands. If the scan is bigger than the + * requested resolution, the upper-left hand corner of the scan is + * returned. If the scan is smaller, then the rest of the image + * returned contains garbage. */ + +static int qc_setscanmode(struct qcam *q) +{ + int old_mode = q->mode; + + switch (q->transfer_scale) { + case 1: + q->mode = 0; + break; + case 2: + q->mode = 4; + break; + case 4: + q->mode = 8; + break; + } + + switch (q->bpp) { + case 4: + break; + case 6: + q->mode += 2; + break; + } + + switch (q->port_mode & QC_MODE_MASK) { + case QC_BIDIR: + q->mode += 1; + break; + case QC_NOTSET: + case QC_UNIDIR: + break; + } + + if (q->mode != old_mode) + q->status |= QC_PARAM_CHANGE; + + return 0; +} + + +/* Reset the QuickCam. This uses the same sequence the Windows + * QuickPic program uses. Someone with a bi-directional port should + * check that bi-directional mode is detected right, and then + * implement bi-directional mode in qc_readbyte(). */ + +static void qc_reset(struct qcam *q) +{ + switch (q->port_mode & QC_FORCE_MASK) { + case QC_FORCE_UNIDIR: + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; + break; + + case QC_FORCE_BIDIR: + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; + break; + + case QC_ANY: + write_lpcontrol(q, 0x20); + write_lpdata(q, 0x75); + + if (read_lpdata(q) != 0x75) + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; + else + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; + break; + } + + write_lpcontrol(q, 0xb); + udelay(250); + write_lpcontrol(q, 0xe); + qc_setscanmode(q); /* in case port_mode changed */ +} + + + +/* Reset the QuickCam and program for brightness, contrast, + * white-balance, and resolution. */ + +static void qc_set(struct qcam *q) +{ + int val; + int val2; + + /* Set the brightness. Yes, this is repetitive, but it works. + * Shorter versions seem to fail subtly. Feel free to try :-). */ + /* I think the problem was in qc_command, not here -- bls */ + + qc_command(q, 0xb); + qc_command(q, q->brightness); + + val = q->height / q->transfer_scale; + qc_command(q, 0x11); + qc_command(q, val); + if ((q->port_mode & QC_MODE_MASK) == QC_UNIDIR && q->bpp == 6) { + /* The normal "transfers per line" calculation doesn't seem to work + as expected here (and yet it works fine in qc_scan). No idea + why this case is the odd man out. Fortunately, Laird's original + working version gives me a good way to guess at working values. + -- bls */ + val = q->width; + val2 = q->transfer_scale * 4; + } else { + val = q->width * q->bpp; + val2 = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * + q->transfer_scale; + } + val = DIV_ROUND_UP(val, val2); + qc_command(q, 0x13); + qc_command(q, val); + + /* Setting top and left -- bls */ + qc_command(q, 0xd); + qc_command(q, q->top); + qc_command(q, 0xf); + qc_command(q, q->left / 2); + + qc_command(q, 0x19); + qc_command(q, q->contrast); + qc_command(q, 0x1f); + qc_command(q, q->whitebal); + + /* Clear flag that we must update the grabbing parameters on the camera + before we grab the next frame */ + q->status &= (~QC_PARAM_CHANGE); +} + +/* Qc_readbytes reads some bytes from the QC and puts them in + the supplied buffer. It returns the number of bytes read, + or -1 on error. */ + +static inline int qc_readbytes(struct qcam *q, char buffer[]) +{ + int ret = 1; + unsigned int hi, lo; + unsigned int hi2, lo2; + static int state; + + if (buffer == NULL) { + state = 0; + return 0; + } + + switch (q->port_mode & QC_MODE_MASK) { + case QC_BIDIR: /* Bi-directional Port */ + write_lpcontrol(q, 0x26); + lo = (qc_waithand2(q, 1) >> 1); + hi = (read_lpstatus(q) >> 3) & 0x1f; + write_lpcontrol(q, 0x2e); + lo2 = (qc_waithand2(q, 0) >> 1); + hi2 = (read_lpstatus(q) >> 3) & 0x1f; + switch (q->bpp) { + case 4: + buffer[0] = lo & 0xf; + buffer[1] = ((lo & 0x70) >> 4) | ((hi & 1) << 3); + buffer[2] = (hi & 0x1e) >> 1; + buffer[3] = lo2 & 0xf; + buffer[4] = ((lo2 & 0x70) >> 4) | ((hi2 & 1) << 3); + buffer[5] = (hi2 & 0x1e) >> 1; + ret = 6; + break; + case 6: + buffer[0] = lo & 0x3f; + buffer[1] = ((lo & 0x40) >> 6) | (hi << 1); + buffer[2] = lo2 & 0x3f; + buffer[3] = ((lo2 & 0x40) >> 6) | (hi2 << 1); + ret = 4; + break; + } + break; + + case QC_UNIDIR: /* Unidirectional Port */ + write_lpcontrol(q, 6); + lo = (qc_waithand(q, 1) & 0xf0) >> 4; + write_lpcontrol(q, 0xe); + hi = (qc_waithand(q, 0) & 0xf0) >> 4; + + switch (q->bpp) { + case 4: + buffer[0] = lo; + buffer[1] = hi; + ret = 2; + break; + case 6: + switch (state) { + case 0: + buffer[0] = (lo << 2) | ((hi & 0xc) >> 2); + q->saved_bits = (hi & 3) << 4; + state = 1; + ret = 1; + break; + case 1: + buffer[0] = lo | q->saved_bits; + q->saved_bits = hi << 2; + state = 2; + ret = 1; + break; + case 2: + buffer[0] = ((lo & 0xc) >> 2) | q->saved_bits; + buffer[1] = ((lo & 3) << 4) | hi; + state = 0; + ret = 2; + break; + } + break; + } + break; + } + return ret; +} + +/* requests a scan from the camera. It sends the correct instructions + * to the camera and then reads back the correct number of bytes. In + * previous versions of this routine the return structure contained + * the raw output from the camera, and there was a 'qc_convertscan' + * function that converted that to a useful format. In version 0.3 I + * rolled qc_convertscan into qc_scan and now I only return the + * converted scan. The format is just an one-dimensional array of + * characters, one for each pixel, with 0=black up to n=white, where + * n=2^(bit depth)-1. Ask me for more details if you don't understand + * this. */ + +static long qc_capture(struct qcam *q, u8 *buf, unsigned long len) +{ + int i, j, k, yield; + int bytes; + int linestotrans, transperline; + int divisor; + int pixels_per_line; + int pixels_read = 0; + int got = 0; + char buffer[6]; + int shift = 8 - q->bpp; + char invert; + + if (q->mode == -1) + return -ENXIO; + + qc_command(q, 0x7); + qc_command(q, q->mode); + + if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) { + write_lpcontrol(q, 0x2e); /* turn port around */ + write_lpcontrol(q, 0x26); + qc_waithand(q, 1); + write_lpcontrol(q, 0x2e); + qc_waithand(q, 0); + } + + /* strange -- should be 15:63 below, but 4bpp is odd */ + invert = (q->bpp == 4) ? 16 : 63; + + linestotrans = q->height / q->transfer_scale; + pixels_per_line = q->width / q->transfer_scale; + transperline = q->width * q->bpp; + divisor = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * + q->transfer_scale; + transperline = DIV_ROUND_UP(transperline, divisor); + + for (i = 0, yield = yieldlines; i < linestotrans; i++) { + for (pixels_read = j = 0; j < transperline; j++) { + bytes = qc_readbytes(q, buffer); + for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) { + int o; + if (buffer[k] == 0 && invert == 16) { + /* 4bpp is odd (again) -- inverter is 16, not 15, but output + must be 0-15 -- bls */ + buffer[k] = 16; + } + o = i * pixels_per_line + pixels_read + k; + if (o < len) { + u8 ch = invert - buffer[k]; + got++; + buf[o] = ch << shift; + } + } + pixels_read += bytes; + } + qc_readbytes(q, NULL); /* reset state machine */ + + /* Grabbing an entire frame from the quickcam is a lengthy + process. We don't (usually) want to busy-block the + processor for the entire frame. yieldlines is a module + parameter. If we yield every line, the minimum frame + time will be 240 / 200 = 1.2 seconds. The compile-time + default is to yield every 4 lines. */ + if (i >= yield) { + msleep_interruptible(5); + yield = i + yieldlines; + } + } + + if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) { + write_lpcontrol(q, 2); + write_lpcontrol(q, 6); + udelay(3); + write_lpcontrol(q, 0xe); + } + if (got < len) + return got; + return len; +} + +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ +static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct qcam *dev = vb2_get_drv_priv(vq); + + if (0 == *nbuffers) + *nbuffers = 3; + *nplanes = 1; + mutex_lock(&dev->lock); + if (fmt) + sizes[0] = fmt->fmt.pix.width * fmt->fmt.pix.height; + else + sizes[0] = (dev->width / dev->transfer_scale) * + (dev->height / dev->transfer_scale); + mutex_unlock(&dev->lock); + return 0; +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); +} + +static int buffer_finish(struct vb2_buffer *vb) +{ + struct qcam *qcam = vb2_get_drv_priv(vb->vb2_queue); + void *vbuf = vb2_plane_vaddr(vb, 0); + int size = vb->vb2_queue->plane_sizes[0]; + int len; + + mutex_lock(&qcam->lock); + parport_claim_or_block(qcam->pdev); + + qc_reset(qcam); + + /* Update the camera parameters if we need to */ + if (qcam->status & QC_PARAM_CHANGE) + qc_set(qcam); + + len = qc_capture(qcam, vbuf, size); + + parport_release(qcam->pdev); + mutex_unlock(&qcam->lock); + if (len != size) + vb->state = VB2_BUF_STATE_ERROR; + vb2_set_plane_payload(vb, 0, len); + return 0; +} + +static struct vb2_ops qcam_video_qops = { + .queue_setup = queue_setup, + .buf_queue = buffer_queue, + .buf_finish = buffer_finish, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +/* + * Video4linux interfacing + */ + +static int qcam_querycap(struct file *file, void *priv, + struct v4l2_capability *vcap) +{ + struct qcam *qcam = video_drvdata(file); + + strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver)); + strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card)); + strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info)); + vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING; + vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + if (vin->index > 0) + return -EINVAL; + strlcpy(vin->name, "Camera", sizeof(vin->name)); + vin->type = V4L2_INPUT_TYPE_CAMERA; + vin->audioset = 0; + vin->tuner = 0; + vin->std = 0; + vin->status = 0; + return 0; +} + +static int qcam_g_input(struct file *file, void *fh, unsigned int *inp) +{ + *inp = 0; + return 0; +} + +static int qcam_s_input(struct file *file, void *fh, unsigned int inp) +{ + return (inp > 0) ? -EINVAL : 0; +} + +static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct qcam *qcam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + pix->width = qcam->width / qcam->transfer_scale; + pix->height = qcam->height / qcam->transfer_scale; + pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = pix->width; + pix->sizeimage = pix->width * pix->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SRGB; + pix->priv = 0; + return 0; +} + +static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->height <= 60 || pix->width <= 80) { + pix->height = 60; + pix->width = 80; + } else if (pix->height <= 120 || pix->width <= 160) { + pix->height = 120; + pix->width = 160; + } else { + pix->height = 240; + pix->width = 320; + } + if (pix->pixelformat != V4L2_PIX_FMT_Y4 && + pix->pixelformat != V4L2_PIX_FMT_Y6) + pix->pixelformat = V4L2_PIX_FMT_Y4; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = pix->width; + pix->sizeimage = pix->width * pix->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SRGB; + pix->priv = 0; + return 0; +} + +static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct qcam *qcam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + int ret = qcam_try_fmt_vid_cap(file, fh, fmt); + + if (ret) + return ret; + if (vb2_is_busy(&qcam->vb_vidq)) + return -EBUSY; + qcam->width = 320; + qcam->height = 240; + if (pix->height == 60) + qcam->transfer_scale = 4; + else if (pix->height == 120) + qcam->transfer_scale = 2; + else + qcam->transfer_scale = 1; + if (pix->pixelformat == V4L2_PIX_FMT_Y6) + qcam->bpp = 6; + else + qcam->bpp = 4; + + qc_setscanmode(qcam); + /* We must update the camera before we grab. We could + just have changed the grab size */ + qcam->status |= QC_PARAM_CHANGE; + return 0; +} + +static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "4-Bit Monochrome", V4L2_PIX_FMT_Y4, + { 0, 0, 0, 0 } + }, + { 1, 0, 0, + "6-Bit Monochrome", V4L2_PIX_FMT_Y6, + { 0, 0, 0, 0 } + }, + }; + enum v4l2_buf_type type = fmt->type; + + if (fmt->index > 1) + return -EINVAL; + + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; +} + +static int qcam_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + static const struct v4l2_frmsize_discrete sizes[] = { + { 80, 60 }, + { 160, 120 }, + { 320, 240 }, + }; + + if (fsize->index > 2) + return -EINVAL; + if (fsize->pixel_format != V4L2_PIX_FMT_Y4 && + fsize->pixel_format != V4L2_PIX_FMT_Y6) + return -EINVAL; + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete = sizes[fsize->index]; + return 0; +} + +static int qcam_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct qcam *qcam = + container_of(ctrl->handler, struct qcam, hdl); + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + qcam->brightness = ctrl->val; + break; + case V4L2_CID_CONTRAST: + qcam->contrast = ctrl->val; + break; + case V4L2_CID_GAMMA: + qcam->whitebal = ctrl->val; + break; + default: + ret = -EINVAL; + break; + } + if (ret == 0) + qcam->status |= QC_PARAM_CHANGE; + return ret; +} + +static const struct v4l2_file_operations qcam_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, + .read = vb2_fop_read, + .mmap = vb2_fop_mmap, +}; + +static const struct v4l2_ioctl_ops qcam_ioctl_ops = { + .vidioc_querycap = qcam_querycap, + .vidioc_g_input = qcam_g_input, + .vidioc_s_input = qcam_s_input, + .vidioc_enum_input = qcam_enum_input, + .vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap, + .vidioc_enum_framesizes = qcam_enum_framesizes, + .vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_ctrl_ops qcam_ctrl_ops = { + .s_ctrl = qcam_s_ctrl, +}; + +/* Initialize the QuickCam driver control structure. This is where + * defaults are set for people who don't have a config file.*/ + +static struct qcam *qcam_init(struct parport *port) +{ + struct qcam *qcam; + struct v4l2_device *v4l2_dev; + struct vb2_queue *q; + int err; + + qcam = kzalloc(sizeof(struct qcam), GFP_KERNEL); + if (qcam == NULL) + return NULL; + + v4l2_dev = &qcam->v4l2_dev; + snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams); + + if (v4l2_device_register(port->dev, v4l2_dev) < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + kfree(qcam); + return NULL; + } + + v4l2_ctrl_handler_init(&qcam->hdl, 3); + v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 180); + v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 192); + v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops, + V4L2_CID_GAMMA, 0, 255, 1, 105); + if (qcam->hdl.error) { + v4l2_err(v4l2_dev, "couldn't register controls\n"); + goto exit; + } + + mutex_init(&qcam->lock); + mutex_init(&qcam->queue_lock); + + /* initialize queue */ + q = &qcam->vb_vidq; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; + q->drv_priv = qcam; + q->ops = &qcam_video_qops; + q->mem_ops = &vb2_vmalloc_memops; + err = vb2_queue_init(q); + if (err < 0) { + v4l2_err(v4l2_dev, "couldn't init vb2_queue for %s.\n", port->name); + goto exit; + } + qcam->vdev.queue = q; + qcam->vdev.queue->lock = &qcam->queue_lock; + + qcam->pport = port; + qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL, + NULL, 0, NULL); + if (qcam->pdev == NULL) { + v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name); + goto exit; + } + + strlcpy(qcam->vdev.name, "Connectix QuickCam", sizeof(qcam->vdev.name)); + qcam->vdev.v4l2_dev = v4l2_dev; + qcam->vdev.ctrl_handler = &qcam->hdl; + qcam->vdev.fops = &qcam_fops; + qcam->vdev.lock = &qcam->lock; + qcam->vdev.ioctl_ops = &qcam_ioctl_ops; + set_bit(V4L2_FL_USE_FH_PRIO, &qcam->vdev.flags); + qcam->vdev.release = video_device_release_empty; + video_set_drvdata(&qcam->vdev, qcam); + + qcam->port_mode = (QC_ANY | QC_NOTSET); + qcam->width = 320; + qcam->height = 240; + qcam->bpp = 4; + qcam->transfer_scale = 2; + qcam->contrast = 192; + qcam->brightness = 180; + qcam->whitebal = 105; + qcam->top = 1; + qcam->left = 14; + qcam->mode = -1; + qcam->status = QC_PARAM_CHANGE; + return qcam; + +exit: + v4l2_ctrl_handler_free(&qcam->hdl); + kfree(qcam); + return NULL; +} + +static int qc_calibrate(struct qcam *q) +{ + /* + * Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96 + * The white balance is an individual value for each + * quickcam. + */ + + int value; + int count = 0; + + qc_command(q, 27); /* AutoAdjustOffset */ + qc_command(q, 0); /* Dummy Parameter, ignored by the camera */ + + /* GetOffset (33) will read 255 until autocalibration */ + /* is finished. After that, a value of 1-254 will be */ + /* returned. */ + + do { + qc_command(q, 33); + value = qc_readparam(q); + mdelay(1); + schedule(); + count++; + } while (value == 0xff && count < 2048); + + q->whitebal = value; + return value; +} + +static int init_bwqcam(struct parport *port) +{ + struct qcam *qcam; + + if (num_cams == MAX_CAMS) { + printk(KERN_ERR "Too many Quickcams (max %d)\n", MAX_CAMS); + return -ENOSPC; + } + + qcam = qcam_init(port); + if (qcam == NULL) + return -ENODEV; + + parport_claim_or_block(qcam->pdev); + + qc_reset(qcam); + + if (qc_detect(qcam) == 0) { + parport_release(qcam->pdev); + parport_unregister_device(qcam->pdev); + kfree(qcam); + return -ENODEV; + } + qc_calibrate(qcam); + v4l2_ctrl_handler_setup(&qcam->hdl); + + parport_release(qcam->pdev); + + v4l2_info(&qcam->v4l2_dev, "Connectix Quickcam on %s\n", qcam->pport->name); + + if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { + parport_unregister_device(qcam->pdev); + kfree(qcam); + return -ENODEV; + } + + qcams[num_cams++] = qcam; + + return 0; +} + +static void close_bwqcam(struct qcam *qcam) +{ + video_unregister_device(&qcam->vdev); + v4l2_ctrl_handler_free(&qcam->hdl); + parport_unregister_device(qcam->pdev); + kfree(qcam); +} + +/* The parport parameter controls which parports will be scanned. + * Scanning all parports causes some printers to print a garbage page. + * -- March 14, 1999 Billy Donahue */ +#ifdef MODULE +static char *parport[MAX_CAMS] = { NULL, }; +module_param_array(parport, charp, NULL, 0); +#endif + +static int accept_bwqcam(struct parport *port) +{ +#ifdef MODULE + int n; + + if (parport[0] && strncmp(parport[0], "auto", 4) != 0) { + /* user gave parport parameters */ + for (n = 0; n < MAX_CAMS && parport[n]; n++) { + char *ep; + unsigned long r; + r = simple_strtoul(parport[n], &ep, 0); + if (ep == parport[n]) { + printk(KERN_ERR + "bw-qcam: bad port specifier \"%s\"\n", + parport[n]); + continue; + } + if (r == port->number) + return 1; + } + return 0; + } +#endif + return 1; +} + +static void bwqcam_attach(struct parport *port) +{ + if (accept_bwqcam(port)) + init_bwqcam(port); +} + +static void bwqcam_detach(struct parport *port) +{ + int i; + for (i = 0; i < num_cams; i++) { + struct qcam *qcam = qcams[i]; + if (qcam && qcam->pdev->port == port) { + qcams[i] = NULL; + close_bwqcam(qcam); + } + } +} + +static struct parport_driver bwqcam_driver = { + .name = "bw-qcam", + .attach = bwqcam_attach, + .detach = bwqcam_detach, +}; + +static void __exit exit_bw_qcams(void) +{ + parport_unregister_driver(&bwqcam_driver); +} + +static int __init init_bw_qcams(void) +{ +#ifdef MODULE + /* Do some sanity checks on the module parameters. */ + if (maxpoll > 5000) { + printk(KERN_INFO "Connectix Quickcam max-poll was above 5000. Using 5000.\n"); + maxpoll = 5000; + } + + if (yieldlines < 1) { + printk(KERN_INFO "Connectix Quickcam yieldlines was less than 1. Using 1.\n"); + yieldlines = 1; + } +#endif + return parport_register_driver(&bwqcam_driver); +} + +module_init(init_bw_qcams); +module_exit(exit_bw_qcams); + +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); diff --git a/drivers/media/parport/c-qcam.c b/drivers/media/parport/c-qcam.c new file mode 100644 index 00000000..ec51e1f1 --- /dev/null +++ b/drivers/media/parport/c-qcam.c @@ -0,0 +1,883 @@ +/* + * Video4Linux Colour QuickCam driver + * Copyright 1997-2000 Philip Blundell + * + * Module parameters: + * + * parport=auto -- probe all parports (default) + * parport=0 -- parport0 becomes qcam1 + * parport=2,0,1 -- parports 2,0,1 are tried in that order + * + * probe=0 -- do no probing, assume camera is present + * probe=1 -- use IEEE-1284 autoprobe data only (default) + * probe=2 -- probe aggressively for cameras + * + * force_rgb=1 -- force data format to RGB (default is BGR) + * + * The parport parameter controls which parports will be scanned. + * Scanning all parports causes some printers to print a garbage page. + * -- March 14, 1999 Billy Donahue + * + * Fixed data format to BGR, added force_rgb parameter. Added missing + * parport_unregister_driver() on module removal. + * -- May 28, 2000 Claudio Matsuoka + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct qcam { + struct v4l2_device v4l2_dev; + struct video_device vdev; + struct v4l2_ctrl_handler hdl; + struct pardevice *pdev; + struct parport *pport; + int width, height; + int ccd_width, ccd_height; + int mode; + int contrast, brightness, whitebal; + int top, left; + unsigned int bidirectional; + struct mutex lock; +}; + +/* cameras maximum */ +#define MAX_CAMS 4 + +/* The three possible QuickCam modes */ +#define QC_MILLIONS 0x18 +#define QC_BILLIONS 0x10 +#define QC_THOUSANDS 0x08 /* with VIDEC compression (not supported) */ + +/* The three possible decimations */ +#define QC_DECIMATION_1 0 +#define QC_DECIMATION_2 2 +#define QC_DECIMATION_4 4 + +#define BANNER "Colour QuickCam for Video4Linux v0.06" + +static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 }; +static int probe = 2; +static bool force_rgb; +static int video_nr = -1; + +/* FIXME: parport=auto would never have worked, surely? --RR */ +MODULE_PARM_DESC(parport, "parport= for port detection method\n" + "probe=<0|1|2> for camera detection method\n" + "force_rgb=<0|1> for RGB data format (default BGR)"); +module_param_array(parport, int, NULL, 0); +module_param(probe, int, 0); +module_param(force_rgb, bool, 0); +module_param(video_nr, int, 0); + +static struct qcam *qcams[MAX_CAMS]; +static unsigned int num_cams; + +static inline void qcam_set_ack(struct qcam *qcam, unsigned int i) +{ + /* note: the QC specs refer to the PCAck pin by voltage, not + software level. PC ports have builtin inverters. */ + parport_frob_control(qcam->pport, 8, i ? 8 : 0); +} + +static inline unsigned int qcam_ready1(struct qcam *qcam) +{ + return (parport_read_status(qcam->pport) & 0x8) ? 1 : 0; +} + +static inline unsigned int qcam_ready2(struct qcam *qcam) +{ + return (parport_read_data(qcam->pport) & 0x1) ? 1 : 0; +} + +static unsigned int qcam_await_ready1(struct qcam *qcam, int value) +{ + struct v4l2_device *v4l2_dev = &qcam->v4l2_dev; + unsigned long oldjiffies = jiffies; + unsigned int i; + + for (oldjiffies = jiffies; + time_before(jiffies, oldjiffies + msecs_to_jiffies(40));) + if (qcam_ready1(qcam) == value) + return 0; + + /* If the camera didn't respond within 1/25 second, poll slowly + for a while. */ + for (i = 0; i < 50; i++) { + if (qcam_ready1(qcam) == value) + return 0; + msleep_interruptible(100); + } + + /* Probably somebody pulled the plug out. Not much we can do. */ + v4l2_err(v4l2_dev, "ready1 timeout (%d) %x %x\n", value, + parport_read_status(qcam->pport), + parport_read_control(qcam->pport)); + return 1; +} + +static unsigned int qcam_await_ready2(struct qcam *qcam, int value) +{ + struct v4l2_device *v4l2_dev = &qcam->v4l2_dev; + unsigned long oldjiffies = jiffies; + unsigned int i; + + for (oldjiffies = jiffies; + time_before(jiffies, oldjiffies + msecs_to_jiffies(40));) + if (qcam_ready2(qcam) == value) + return 0; + + /* If the camera didn't respond within 1/25 second, poll slowly + for a while. */ + for (i = 0; i < 50; i++) { + if (qcam_ready2(qcam) == value) + return 0; + msleep_interruptible(100); + } + + /* Probably somebody pulled the plug out. Not much we can do. */ + v4l2_err(v4l2_dev, "ready2 timeout (%d) %x %x %x\n", value, + parport_read_status(qcam->pport), + parport_read_control(qcam->pport), + parport_read_data(qcam->pport)); + return 1; +} + +static int qcam_read_data(struct qcam *qcam) +{ + unsigned int idata; + + qcam_set_ack(qcam, 0); + if (qcam_await_ready1(qcam, 1)) + return -1; + idata = parport_read_status(qcam->pport) & 0xf0; + qcam_set_ack(qcam, 1); + if (qcam_await_ready1(qcam, 0)) + return -1; + idata |= parport_read_status(qcam->pport) >> 4; + return idata; +} + +static int qcam_write_data(struct qcam *qcam, unsigned int data) +{ + struct v4l2_device *v4l2_dev = &qcam->v4l2_dev; + unsigned int idata; + + parport_write_data(qcam->pport, data); + idata = qcam_read_data(qcam); + if (data != idata) { + v4l2_warn(v4l2_dev, "sent %x but received %x\n", data, + idata); + return 1; + } + return 0; +} + +static inline int qcam_set(struct qcam *qcam, unsigned int cmd, unsigned int data) +{ + if (qcam_write_data(qcam, cmd)) + return -1; + if (qcam_write_data(qcam, data)) + return -1; + return 0; +} + +static inline int qcam_get(struct qcam *qcam, unsigned int cmd) +{ + if (qcam_write_data(qcam, cmd)) + return -1; + return qcam_read_data(qcam); +} + +static int qc_detect(struct qcam *qcam) +{ + unsigned int stat, ostat, i, count = 0; + + /* The probe routine below is not very reliable. The IEEE-1284 + probe takes precedence. */ + /* XXX Currently parport provides no way to distinguish between + "the IEEE probe was not done" and "the probe was done, but + no device was found". Fix this one day. */ + if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA + && qcam->pport->probe_info[0].model + && !strcmp(qcam->pdev->port->probe_info[0].model, + "Color QuickCam 2.0")) { + printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n"); + return 1; + } + + if (probe < 2) + return 0; + + parport_write_control(qcam->pport, 0xc); + + /* look for a heartbeat */ + ostat = stat = parport_read_status(qcam->pport); + for (i = 0; i < 250; i++) { + mdelay(1); + stat = parport_read_status(qcam->pport); + if (ostat != stat) { + if (++count >= 3) + return 1; + ostat = stat; + } + } + + /* Reset the camera and try again */ + parport_write_control(qcam->pport, 0xc); + parport_write_control(qcam->pport, 0x8); + mdelay(1); + parport_write_control(qcam->pport, 0xc); + mdelay(1); + count = 0; + + ostat = stat = parport_read_status(qcam->pport); + for (i = 0; i < 250; i++) { + mdelay(1); + stat = parport_read_status(qcam->pport); + if (ostat != stat) { + if (++count >= 3) + return 1; + ostat = stat; + } + } + + /* no (or flatline) camera, give up */ + return 0; +} + +static void qc_reset(struct qcam *qcam) +{ + parport_write_control(qcam->pport, 0xc); + parport_write_control(qcam->pport, 0x8); + mdelay(1); + parport_write_control(qcam->pport, 0xc); + mdelay(1); +} + +/* Reset the QuickCam and program for brightness, contrast, + * white-balance, and resolution. */ + +static void qc_setup(struct qcam *qcam) +{ + qc_reset(qcam); + + /* Set the brightness. */ + qcam_set(qcam, 11, qcam->brightness); + + /* Set the height and width. These refer to the actual + CCD area *before* applying the selected decimation. */ + qcam_set(qcam, 17, qcam->ccd_height); + qcam_set(qcam, 19, qcam->ccd_width / 2); + + /* Set top and left. */ + qcam_set(qcam, 0xd, qcam->top); + qcam_set(qcam, 0xf, qcam->left); + + /* Set contrast and white balance. */ + qcam_set(qcam, 0x19, qcam->contrast); + qcam_set(qcam, 0x1f, qcam->whitebal); + + /* Set the speed. */ + qcam_set(qcam, 45, 2); +} + +/* Read some bytes from the camera and put them in the buffer. + nbytes should be a multiple of 3, because bidirectional mode gives + us three bytes at a time. */ + +static unsigned int qcam_read_bytes(struct qcam *qcam, unsigned char *buf, unsigned int nbytes) +{ + unsigned int bytes = 0; + + qcam_set_ack(qcam, 0); + if (qcam->bidirectional) { + /* It's a bidirectional port */ + while (bytes < nbytes) { + unsigned int lo1, hi1, lo2, hi2; + unsigned char r, g, b; + + if (qcam_await_ready2(qcam, 1)) + return bytes; + lo1 = parport_read_data(qcam->pport) >> 1; + hi1 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10; + qcam_set_ack(qcam, 1); + if (qcam_await_ready2(qcam, 0)) + return bytes; + lo2 = parport_read_data(qcam->pport) >> 1; + hi2 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10; + qcam_set_ack(qcam, 0); + r = lo1 | ((hi1 & 1) << 7); + g = ((hi1 & 0x1e) << 3) | ((hi2 & 0x1e) >> 1); + b = lo2 | ((hi2 & 1) << 7); + if (force_rgb) { + buf[bytes++] = r; + buf[bytes++] = g; + buf[bytes++] = b; + } else { + buf[bytes++] = b; + buf[bytes++] = g; + buf[bytes++] = r; + } + } + } else { + /* It's a unidirectional port */ + int i = 0, n = bytes; + unsigned char rgb[3]; + + while (bytes < nbytes) { + unsigned int hi, lo; + + if (qcam_await_ready1(qcam, 1)) + return bytes; + hi = (parport_read_status(qcam->pport) & 0xf0); + qcam_set_ack(qcam, 1); + if (qcam_await_ready1(qcam, 0)) + return bytes; + lo = (parport_read_status(qcam->pport) & 0xf0); + qcam_set_ack(qcam, 0); + /* flip some bits */ + rgb[(i = bytes++ % 3)] = (hi | (lo >> 4)) ^ 0x88; + if (i >= 2) { +get_fragment: + if (force_rgb) { + buf[n++] = rgb[0]; + buf[n++] = rgb[1]; + buf[n++] = rgb[2]; + } else { + buf[n++] = rgb[2]; + buf[n++] = rgb[1]; + buf[n++] = rgb[0]; + } + } + } + if (i) { + i = 0; + goto get_fragment; + } + } + return bytes; +} + +#define BUFSZ 150 + +static long qc_capture(struct qcam *qcam, char __user *buf, unsigned long len) +{ + struct v4l2_device *v4l2_dev = &qcam->v4l2_dev; + unsigned lines, pixelsperline; + unsigned int is_bi_dir = qcam->bidirectional; + size_t wantlen, outptr = 0; + char tmpbuf[BUFSZ]; + + if (!access_ok(VERIFY_WRITE, buf, len)) + return -EFAULT; + + /* Wait for camera to become ready */ + for (;;) { + int i = qcam_get(qcam, 41); + + if (i == -1) { + qc_setup(qcam); + return -EIO; + } + if ((i & 0x80) == 0) + break; + schedule(); + } + + if (qcam_set(qcam, 7, (qcam->mode | (is_bi_dir ? 1 : 0)) + 1)) + return -EIO; + + lines = qcam->height; + pixelsperline = qcam->width; + + if (is_bi_dir) { + /* Turn the port around */ + parport_data_reverse(qcam->pport); + mdelay(3); + qcam_set_ack(qcam, 0); + if (qcam_await_ready1(qcam, 1)) { + qc_setup(qcam); + return -EIO; + } + qcam_set_ack(qcam, 1); + if (qcam_await_ready1(qcam, 0)) { + qc_setup(qcam); + return -EIO; + } + } + + wantlen = lines * pixelsperline * 24 / 8; + + while (wantlen) { + size_t t, s; + + s = (wantlen > BUFSZ) ? BUFSZ : wantlen; + t = qcam_read_bytes(qcam, tmpbuf, s); + if (outptr < len) { + size_t sz = len - outptr; + + if (sz > t) + sz = t; + if (__copy_to_user(buf + outptr, tmpbuf, sz)) + break; + outptr += sz; + } + wantlen -= t; + if (t < s) + break; + cond_resched(); + } + + len = outptr; + + if (wantlen) { + v4l2_err(v4l2_dev, "short read.\n"); + if (is_bi_dir) + parport_data_forward(qcam->pport); + qc_setup(qcam); + return len; + } + + if (is_bi_dir) { + int l; + + do { + l = qcam_read_bytes(qcam, tmpbuf, 3); + cond_resched(); + } while (l && (tmpbuf[0] == 0x7e || tmpbuf[1] == 0x7e || tmpbuf[2] == 0x7e)); + if (force_rgb) { + if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf) + v4l2_err(v4l2_dev, "bad EOF\n"); + } else { + if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe) + v4l2_err(v4l2_dev, "bad EOF\n"); + } + qcam_set_ack(qcam, 0); + if (qcam_await_ready1(qcam, 1)) { + v4l2_err(v4l2_dev, "no ack after EOF\n"); + parport_data_forward(qcam->pport); + qc_setup(qcam); + return len; + } + parport_data_forward(qcam->pport); + mdelay(3); + qcam_set_ack(qcam, 1); + if (qcam_await_ready1(qcam, 0)) { + v4l2_err(v4l2_dev, "no ack to port turnaround\n"); + qc_setup(qcam); + return len; + } + } else { + int l; + + do { + l = qcam_read_bytes(qcam, tmpbuf, 1); + cond_resched(); + } while (l && tmpbuf[0] == 0x7e); + l = qcam_read_bytes(qcam, tmpbuf + 1, 2); + if (force_rgb) { + if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf) + v4l2_err(v4l2_dev, "bad EOF\n"); + } else { + if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe) + v4l2_err(v4l2_dev, "bad EOF\n"); + } + } + + qcam_write_data(qcam, 0); + return len; +} + +/* + * Video4linux interfacing + */ + +static int qcam_querycap(struct file *file, void *priv, + struct v4l2_capability *vcap) +{ + struct qcam *qcam = video_drvdata(file); + + strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver)); + strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card)); + strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); + vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; + vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + if (vin->index > 0) + return -EINVAL; + strlcpy(vin->name, "Camera", sizeof(vin->name)); + vin->type = V4L2_INPUT_TYPE_CAMERA; + vin->audioset = 0; + vin->tuner = 0; + vin->std = 0; + vin->status = 0; + return 0; +} + +static int qcam_g_input(struct file *file, void *fh, unsigned int *inp) +{ + *inp = 0; + return 0; +} + +static int qcam_s_input(struct file *file, void *fh, unsigned int inp) +{ + return (inp > 0) ? -EINVAL : 0; +} + +static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct qcam *qcam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + pix->width = qcam->width; + pix->height = qcam->height; + pix->pixelformat = V4L2_PIX_FMT_RGB24; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = 3 * qcam->width; + pix->sizeimage = 3 * qcam->width * qcam->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SRGB; + return 0; +} + +static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->height < 60 || pix->width < 80) { + pix->height = 60; + pix->width = 80; + } else if (pix->height < 120 || pix->width < 160) { + pix->height = 120; + pix->width = 160; + } else { + pix->height = 240; + pix->width = 320; + } + pix->pixelformat = V4L2_PIX_FMT_RGB24; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = 3 * pix->width; + pix->sizeimage = 3 * pix->width * pix->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SRGB; + return 0; +} + +static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct qcam *qcam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + int ret = qcam_try_fmt_vid_cap(file, fh, fmt); + + if (ret) + return ret; + switch (pix->height) { + case 60: + qcam->mode = QC_DECIMATION_4; + break; + case 120: + qcam->mode = QC_DECIMATION_2; + break; + default: + qcam->mode = QC_DECIMATION_1; + break; + } + + mutex_lock(&qcam->lock); + qcam->mode |= QC_MILLIONS; + qcam->height = pix->height; + qcam->width = pix->width; + parport_claim_or_block(qcam->pdev); + qc_setup(qcam); + parport_release(qcam->pdev); + mutex_unlock(&qcam->lock); + return 0; +} + +static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "RGB 8:8:8", V4L2_PIX_FMT_RGB24, + { 0, 0, 0, 0 } + }, + }; + enum v4l2_buf_type type = fmt->type; + + if (fmt->index > 0) + return -EINVAL; + + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; +} + +static ssize_t qcam_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct qcam *qcam = video_drvdata(file); + int len; + + mutex_lock(&qcam->lock); + parport_claim_or_block(qcam->pdev); + /* Probably should have a semaphore against multiple users */ + len = qc_capture(qcam, buf, count); + parport_release(qcam->pdev); + mutex_unlock(&qcam->lock); + return len; +} + +static int qcam_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct qcam *qcam = + container_of(ctrl->handler, struct qcam, hdl); + int ret = 0; + + mutex_lock(&qcam->lock); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + qcam->brightness = ctrl->val; + break; + case V4L2_CID_CONTRAST: + qcam->contrast = ctrl->val; + break; + case V4L2_CID_GAMMA: + qcam->whitebal = ctrl->val; + break; + default: + ret = -EINVAL; + break; + } + if (ret == 0) { + parport_claim_or_block(qcam->pdev); + qc_setup(qcam); + parport_release(qcam->pdev); + } + mutex_unlock(&qcam->lock); + return ret; +} + +static const struct v4l2_file_operations qcam_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, + .read = qcam_read, +}; + +static const struct v4l2_ioctl_ops qcam_ioctl_ops = { + .vidioc_querycap = qcam_querycap, + .vidioc_g_input = qcam_g_input, + .vidioc_s_input = qcam_s_input, + .vidioc_enum_input = qcam_enum_input, + .vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_ctrl_ops qcam_ctrl_ops = { + .s_ctrl = qcam_s_ctrl, +}; + +/* Initialize the QuickCam driver control structure. */ + +static struct qcam *qcam_init(struct parport *port) +{ + struct qcam *qcam; + struct v4l2_device *v4l2_dev; + + qcam = kzalloc(sizeof(*qcam), GFP_KERNEL); + if (qcam == NULL) + return NULL; + + v4l2_dev = &qcam->v4l2_dev; + strlcpy(v4l2_dev->name, "c-qcam", sizeof(v4l2_dev->name)); + + if (v4l2_device_register(NULL, v4l2_dev) < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + kfree(qcam); + return NULL; + } + + v4l2_ctrl_handler_init(&qcam->hdl, 3); + v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 240); + v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 192); + v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops, + V4L2_CID_GAMMA, 0, 255, 1, 128); + if (qcam->hdl.error) { + v4l2_err(v4l2_dev, "couldn't register controls\n"); + v4l2_ctrl_handler_free(&qcam->hdl); + kfree(qcam); + return NULL; + } + + qcam->pport = port; + qcam->pdev = parport_register_device(port, "c-qcam", NULL, NULL, + NULL, 0, NULL); + + qcam->bidirectional = (qcam->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0; + + if (qcam->pdev == NULL) { + v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name); + v4l2_ctrl_handler_free(&qcam->hdl); + kfree(qcam); + return NULL; + } + + strlcpy(qcam->vdev.name, "Colour QuickCam", sizeof(qcam->vdev.name)); + qcam->vdev.v4l2_dev = v4l2_dev; + qcam->vdev.fops = &qcam_fops; + qcam->vdev.ioctl_ops = &qcam_ioctl_ops; + qcam->vdev.release = video_device_release_empty; + qcam->vdev.ctrl_handler = &qcam->hdl; + set_bit(V4L2_FL_USE_FH_PRIO, &qcam->vdev.flags); + video_set_drvdata(&qcam->vdev, qcam); + + mutex_init(&qcam->lock); + qcam->width = qcam->ccd_width = 320; + qcam->height = qcam->ccd_height = 240; + qcam->mode = QC_MILLIONS | QC_DECIMATION_1; + qcam->contrast = 192; + qcam->brightness = 240; + qcam->whitebal = 128; + qcam->top = 1; + qcam->left = 14; + return qcam; +} + +static int init_cqcam(struct parport *port) +{ + struct qcam *qcam; + struct v4l2_device *v4l2_dev; + + if (parport[0] != -1) { + /* The user gave specific instructions */ + int i, found = 0; + + for (i = 0; i < MAX_CAMS && parport[i] != -1; i++) { + if (parport[0] == port->number) + found = 1; + } + if (!found) + return -ENODEV; + } + + if (num_cams == MAX_CAMS) + return -ENOSPC; + + qcam = qcam_init(port); + if (qcam == NULL) + return -ENODEV; + + v4l2_dev = &qcam->v4l2_dev; + + parport_claim_or_block(qcam->pdev); + + qc_reset(qcam); + + if (probe && qc_detect(qcam) == 0) { + parport_release(qcam->pdev); + parport_unregister_device(qcam->pdev); + kfree(qcam); + return -ENODEV; + } + + qc_setup(qcam); + + parport_release(qcam->pdev); + + if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { + v4l2_err(v4l2_dev, "Unable to register Colour QuickCam on %s\n", + qcam->pport->name); + parport_unregister_device(qcam->pdev); + kfree(qcam); + return -ENODEV; + } + + v4l2_info(v4l2_dev, "%s: Colour QuickCam found on %s\n", + video_device_node_name(&qcam->vdev), qcam->pport->name); + + qcams[num_cams++] = qcam; + + return 0; +} + +static void close_cqcam(struct qcam *qcam) +{ + video_unregister_device(&qcam->vdev); + v4l2_ctrl_handler_free(&qcam->hdl); + parport_unregister_device(qcam->pdev); + kfree(qcam); +} + +static void cq_attach(struct parport *port) +{ + init_cqcam(port); +} + +static void cq_detach(struct parport *port) +{ + /* Write this some day. */ +} + +static struct parport_driver cqcam_driver = { + .name = "cqcam", + .attach = cq_attach, + .detach = cq_detach, +}; + +static int __init cqcam_init(void) +{ + printk(KERN_INFO BANNER "\n"); + + return parport_register_driver(&cqcam_driver); +} + +static void __exit cqcam_cleanup(void) +{ + unsigned int i; + + for (i = 0; i < num_cams; i++) + close_cqcam(qcams[i]); + + parport_unregister_driver(&cqcam_driver); +} + +MODULE_AUTHOR("Philip Blundell "); +MODULE_DESCRIPTION(BANNER); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.4"); + +module_init(cqcam_init); +module_exit(cqcam_cleanup); diff --git a/drivers/media/parport/pms.c b/drivers/media/parport/pms.c new file mode 100644 index 00000000..66c957a0 --- /dev/null +++ b/drivers/media/parport/pms.c @@ -0,0 +1,1152 @@ +/* + * Media Vision Pro Movie Studio + * or + * "all you need is an I2C bus some RAM and a prayer" + * + * This draws heavily on code + * + * (c) Wolfgang Koehler, wolf@first.gmd.de, Dec. 1994 + * Kiefernring 15 + * 14478 Potsdam, Germany + * + * Most of this code is directly derived from his userspace driver. + * His driver works so send any reports to alan@lxorguk.ukuu.org.uk + * unless the userspace driver also doesn't work for you... + * + * Changes: + * 25-11-2009 Hans Verkuil + * - converted to version 2 of the V4L API. + * 08/07/2003 Daniele Bellucci + * - pms_capture: report back -EFAULT + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.5"); + +#define MOTOROLA 1 +#define PHILIPS2 2 /* SAA7191 */ +#define PHILIPS1 3 +#define MVVMEMORYWIDTH 0x40 /* 512 bytes */ + +struct i2c_info { + u8 slave; + u8 sub; + u8 data; + u8 hits; +}; + +struct pms { + struct v4l2_device v4l2_dev; + struct video_device vdev; + struct v4l2_ctrl_handler hdl; + int height; + int width; + int depth; + int input; + struct mutex lock; + int i2c_count; + struct i2c_info i2cinfo[64]; + + int decoder; + int standard; /* 0 - auto 1 - ntsc 2 - pal 3 - secam */ + v4l2_std_id std; + int io; + int data; + void __iomem *mem; +}; + +/* + * I/O ports and Shared Memory + */ + +static int io_port = 0x250; +module_param(io_port, int, 0); + +static int mem_base = 0xc8000; +module_param(mem_base, int, 0); + +static int video_nr = -1; +module_param(video_nr, int, 0); + + +static inline void mvv_write(struct pms *dev, u8 index, u8 value) +{ + outw(index | (value << 8), dev->io); +} + +static inline u8 mvv_read(struct pms *dev, u8 index) +{ + outb(index, dev->io); + return inb(dev->data); +} + +static int pms_i2c_stat(struct pms *dev, u8 slave) +{ + int counter = 0; + int i; + + outb(0x28, dev->io); + + while ((inb(dev->data) & 0x01) == 0) + if (counter++ == 256) + break; + + while ((inb(dev->data) & 0x01) != 0) + if (counter++ == 256) + break; + + outb(slave, dev->io); + + counter = 0; + while ((inb(dev->data) & 0x01) == 0) + if (counter++ == 256) + break; + + while ((inb(dev->data) & 0x01) != 0) + if (counter++ == 256) + break; + + for (i = 0; i < 12; i++) { + char st = inb(dev->data); + + if ((st & 2) != 0) + return -1; + if ((st & 1) == 0) + break; + } + outb(0x29, dev->io); + return inb(dev->data); +} + +static int pms_i2c_write(struct pms *dev, u16 slave, u16 sub, u16 data) +{ + int skip = 0; + int count; + int i; + + for (i = 0; i < dev->i2c_count; i++) { + if ((dev->i2cinfo[i].slave == slave) && + (dev->i2cinfo[i].sub == sub)) { + if (dev->i2cinfo[i].data == data) + skip = 1; + dev->i2cinfo[i].data = data; + i = dev->i2c_count + 1; + } + } + + if (i == dev->i2c_count && dev->i2c_count < 64) { + dev->i2cinfo[dev->i2c_count].slave = slave; + dev->i2cinfo[dev->i2c_count].sub = sub; + dev->i2cinfo[dev->i2c_count].data = data; + dev->i2c_count++; + } + + if (skip) + return 0; + + mvv_write(dev, 0x29, sub); + mvv_write(dev, 0x2A, data); + mvv_write(dev, 0x28, slave); + + outb(0x28, dev->io); + + count = 0; + while ((inb(dev->data) & 1) == 0) + if (count > 255) + break; + while ((inb(dev->data) & 1) != 0) + if (count > 255) + break; + + count = inb(dev->data); + + if (count & 2) + return -1; + return count; +} + +static int pms_i2c_read(struct pms *dev, int slave, int sub) +{ + int i; + + for (i = 0; i < dev->i2c_count; i++) { + if (dev->i2cinfo[i].slave == slave && dev->i2cinfo[i].sub == sub) + return dev->i2cinfo[i].data; + } + return 0; +} + + +static void pms_i2c_andor(struct pms *dev, int slave, int sub, int and, int or) +{ + u8 tmp; + + tmp = pms_i2c_read(dev, slave, sub); + tmp = (tmp & and) | or; + pms_i2c_write(dev, slave, sub, tmp); +} + +/* + * Control functions + */ + + +static void pms_videosource(struct pms *dev, short source) +{ + switch (dev->decoder) { + case MOTOROLA: + break; + case PHILIPS2: + pms_i2c_andor(dev, 0x8a, 0x06, 0x7f, source ? 0x80 : 0); + break; + case PHILIPS1: + break; + } + mvv_write(dev, 0x2E, 0x31); + /* Was: mvv_write(dev, 0x2E, source ? 0x31 : 0x30); + But could not make this work correctly. Only Composite input + worked for me. */ +} + +static void pms_hue(struct pms *dev, short hue) +{ + switch (dev->decoder) { + case MOTOROLA: + pms_i2c_write(dev, 0x8a, 0x00, hue); + break; + case PHILIPS2: + pms_i2c_write(dev, 0x8a, 0x07, hue); + break; + case PHILIPS1: + pms_i2c_write(dev, 0x42, 0x07, hue); + break; + } +} + +static void pms_saturation(struct pms *dev, short sat) +{ + switch (dev->decoder) { + case MOTOROLA: + pms_i2c_write(dev, 0x8a, 0x00, sat); + break; + case PHILIPS1: + pms_i2c_write(dev, 0x42, 0x12, sat); + break; + } +} + + +static void pms_contrast(struct pms *dev, short contrast) +{ + switch (dev->decoder) { + case MOTOROLA: + pms_i2c_write(dev, 0x8a, 0x00, contrast); + break; + case PHILIPS1: + pms_i2c_write(dev, 0x42, 0x13, contrast); + break; + } +} + +static void pms_brightness(struct pms *dev, short brightness) +{ + switch (dev->decoder) { + case MOTOROLA: + pms_i2c_write(dev, 0x8a, 0x00, brightness); + pms_i2c_write(dev, 0x8a, 0x00, brightness); + pms_i2c_write(dev, 0x8a, 0x00, brightness); + break; + case PHILIPS1: + pms_i2c_write(dev, 0x42, 0x19, brightness); + break; + } +} + + +static void pms_format(struct pms *dev, short format) +{ + int target; + + dev->standard = format; + + if (dev->decoder == PHILIPS1) + target = 0x42; + else if (dev->decoder == PHILIPS2) + target = 0x8a; + else + return; + + switch (format) { + case 0: /* Auto */ + pms_i2c_andor(dev, target, 0x0d, 0xfe, 0x00); + pms_i2c_andor(dev, target, 0x0f, 0x3f, 0x80); + break; + case 1: /* NTSC */ + pms_i2c_andor(dev, target, 0x0d, 0xfe, 0x00); + pms_i2c_andor(dev, target, 0x0f, 0x3f, 0x40); + break; + case 2: /* PAL */ + pms_i2c_andor(dev, target, 0x0d, 0xfe, 0x00); + pms_i2c_andor(dev, target, 0x0f, 0x3f, 0x00); + break; + case 3: /* SECAM */ + pms_i2c_andor(dev, target, 0x0d, 0xfe, 0x01); + pms_i2c_andor(dev, target, 0x0f, 0x3f, 0x00); + break; + } +} + +#ifdef FOR_FUTURE_EXPANSION + +/* + * These features of the PMS card are not currently exposes. They + * could become a private v4l ioctl for PMSCONFIG or somesuch if + * people need it. We also don't yet use the PMS interrupt. + */ + +static void pms_hstart(struct pms *dev, short start) +{ + switch (dev->decoder) { + case PHILIPS1: + pms_i2c_write(dev, 0x8a, 0x05, start); + pms_i2c_write(dev, 0x8a, 0x18, start); + break; + case PHILIPS2: + pms_i2c_write(dev, 0x42, 0x05, start); + pms_i2c_write(dev, 0x42, 0x18, start); + break; + } +} + +/* + * Bandpass filters + */ + +static void pms_bandpass(struct pms *dev, short pass) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x06, 0xcf, (pass & 0x03) << 4); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x06, 0xcf, (pass & 0x03) << 4); +} + +static void pms_antisnow(struct pms *dev, short snow) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x06, 0xf3, (snow & 0x03) << 2); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x06, 0xf3, (snow & 0x03) << 2); +} + +static void pms_sharpness(struct pms *dev, short sharp) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x06, 0xfc, sharp & 0x03); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x06, 0xfc, sharp & 0x03); +} + +static void pms_chromaagc(struct pms *dev, short agc) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x0c, 0x9f, (agc & 0x03) << 5); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x0c, 0x9f, (agc & 0x03) << 5); +} + +static void pms_vertnoise(struct pms *dev, short noise) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x10, 0xfc, noise & 3); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x10, 0xfc, noise & 3); +} + +static void pms_forcecolour(struct pms *dev, short colour) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x0c, 0x7f, (colour & 1) << 7); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x0c, 0x7, (colour & 1) << 7); +} + +static void pms_antigamma(struct pms *dev, short gamma) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0xb8, 0x00, 0x7f, (gamma & 1) << 7); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x20, 0x7, (gamma & 1) << 7); +} + +static void pms_prefilter(struct pms *dev, short filter) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x06, 0xbf, (filter & 1) << 6); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x06, 0xbf, (filter & 1) << 6); +} + +static void pms_hfilter(struct pms *dev, short filter) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0xb8, 0x04, 0x1f, (filter & 7) << 5); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x24, 0x1f, (filter & 7) << 5); +} + +static void pms_vfilter(struct pms *dev, short filter) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0xb8, 0x08, 0x9f, (filter & 3) << 5); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x28, 0x9f, (filter & 3) << 5); +} + +static void pms_killcolour(struct pms *dev, short colour) +{ + if (dev->decoder == PHILIPS2) { + pms_i2c_andor(dev, 0x8a, 0x08, 0x07, (colour & 0x1f) << 3); + pms_i2c_andor(dev, 0x8a, 0x09, 0x07, (colour & 0x1f) << 3); + } else if (dev->decoder == PHILIPS1) { + pms_i2c_andor(dev, 0x42, 0x08, 0x07, (colour & 0x1f) << 3); + pms_i2c_andor(dev, 0x42, 0x09, 0x07, (colour & 0x1f) << 3); + } +} + +static void pms_chromagain(struct pms *dev, short chroma) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_write(dev, 0x8a, 0x11, chroma); + else if (dev->decoder == PHILIPS1) + pms_i2c_write(dev, 0x42, 0x11, chroma); +} + + +static void pms_spacialcompl(struct pms *dev, short data) +{ + mvv_write(dev, 0x3b, data); +} + +static void pms_spacialcomph(struct pms *dev, short data) +{ + mvv_write(dev, 0x3a, data); +} + +static void pms_vstart(struct pms *dev, short start) +{ + mvv_write(dev, 0x16, start); + mvv_write(dev, 0x17, (start >> 8) & 0x01); +} + +#endif + +static void pms_secamcross(struct pms *dev, short cross) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x0f, 0xdf, (cross & 1) << 5); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x0f, 0xdf, (cross & 1) << 5); +} + + +static void pms_swsense(struct pms *dev, short sense) +{ + if (dev->decoder == PHILIPS2) { + pms_i2c_write(dev, 0x8a, 0x0a, sense); + pms_i2c_write(dev, 0x8a, 0x0b, sense); + } else if (dev->decoder == PHILIPS1) { + pms_i2c_write(dev, 0x42, 0x0a, sense); + pms_i2c_write(dev, 0x42, 0x0b, sense); + } +} + + +static void pms_framerate(struct pms *dev, short frr) +{ + int fps = (dev->std & V4L2_STD_525_60) ? 30 : 25; + + if (frr == 0) + return; + fps = fps/frr; + mvv_write(dev, 0x14, 0x80 | fps); + mvv_write(dev, 0x15, 1); +} + +static void pms_vert(struct pms *dev, u8 deciden, u8 decinum) +{ + mvv_write(dev, 0x1c, deciden); /* Denominator */ + mvv_write(dev, 0x1d, decinum); /* Numerator */ +} + +/* + * Turn 16bit ratios into best small ratio the chipset can grok + */ + +static void pms_vertdeci(struct pms *dev, unsigned short decinum, unsigned short deciden) +{ + /* Knock it down by / 5 once */ + if (decinum % 5 == 0) { + deciden /= 5; + decinum /= 5; + } + /* + * 3's + */ + while (decinum % 3 == 0 && deciden % 3 == 0) { + deciden /= 3; + decinum /= 3; + } + /* + * 2's + */ + while (decinum % 2 == 0 && deciden % 2 == 0) { + decinum /= 2; + deciden /= 2; + } + /* + * Fudgyify + */ + while (deciden > 32) { + deciden /= 2; + decinum = (decinum + 1) / 2; + } + if (deciden == 32) + deciden--; + pms_vert(dev, deciden, decinum); +} + +static void pms_horzdeci(struct pms *dev, short decinum, short deciden) +{ + if (decinum <= 512) { + if (decinum % 5 == 0) { + decinum /= 5; + deciden /= 5; + } + } else { + decinum = 512; + deciden = 640; /* 768 would be ideal */ + } + + while (((decinum | deciden) & 1) == 0) { + decinum >>= 1; + deciden >>= 1; + } + while (deciden > 32) { + deciden >>= 1; + decinum = (decinum + 1) >> 1; + } + if (deciden == 32) + deciden--; + + mvv_write(dev, 0x24, 0x80 | deciden); + mvv_write(dev, 0x25, decinum); +} + +static void pms_resolution(struct pms *dev, short width, short height) +{ + int fg_height; + + fg_height = height; + if (fg_height > 280) + fg_height = 280; + + mvv_write(dev, 0x18, fg_height); + mvv_write(dev, 0x19, fg_height >> 8); + + if (dev->std & V4L2_STD_525_60) { + mvv_write(dev, 0x1a, 0xfc); + mvv_write(dev, 0x1b, 0x00); + if (height > fg_height) + pms_vertdeci(dev, 240, 240); + else + pms_vertdeci(dev, fg_height, 240); + } else { + mvv_write(dev, 0x1a, 0x1a); + mvv_write(dev, 0x1b, 0x01); + if (fg_height > 256) + pms_vertdeci(dev, 270, 270); + else + pms_vertdeci(dev, fg_height, 270); + } + mvv_write(dev, 0x12, 0); + mvv_write(dev, 0x13, MVVMEMORYWIDTH); + mvv_write(dev, 0x42, 0x00); + mvv_write(dev, 0x43, 0x00); + mvv_write(dev, 0x44, MVVMEMORYWIDTH); + + mvv_write(dev, 0x22, width + 8); + mvv_write(dev, 0x23, (width + 8) >> 8); + + if (dev->std & V4L2_STD_525_60) + pms_horzdeci(dev, width, 640); + else + pms_horzdeci(dev, width + 8, 768); + + mvv_write(dev, 0x30, mvv_read(dev, 0x30) & 0xfe); + mvv_write(dev, 0x08, mvv_read(dev, 0x08) | 0x01); + mvv_write(dev, 0x01, mvv_read(dev, 0x01) & 0xfd); + mvv_write(dev, 0x32, 0x00); + mvv_write(dev, 0x33, MVVMEMORYWIDTH); +} + + +/* + * Set Input + */ + +static void pms_vcrinput(struct pms *dev, short input) +{ + if (dev->decoder == PHILIPS2) + pms_i2c_andor(dev, 0x8a, 0x0d, 0x7f, (input & 1) << 7); + else if (dev->decoder == PHILIPS1) + pms_i2c_andor(dev, 0x42, 0x0d, 0x7f, (input & 1) << 7); +} + + +static int pms_capture(struct pms *dev, char __user *buf, int rgb555, int count) +{ + int y; + int dw = 2 * dev->width; + char tmp[dw + 32]; /* using a temp buffer is faster than direct */ + int cnt = 0; + int len = 0; + unsigned char r8 = 0x5; /* value for reg8 */ + + if (rgb555) + r8 |= 0x20; /* else use untranslated rgb = 565 */ + mvv_write(dev, 0x08, r8); /* capture rgb555/565, init DRAM, PC enable */ + +/* printf("%d %d %d %d %d %x %x\n",width,height,voff,nom,den,mvv_buf); */ + + for (y = 0; y < dev->height; y++) { + writeb(0, dev->mem); /* synchronisiert neue Zeile */ + + /* + * This is in truth a fifo, be very careful as if you + * forgot this odd things will occur 8) + */ + + memcpy_fromio(tmp, dev->mem, dw + 32); /* discard 16 word */ + cnt -= dev->height; + while (cnt <= 0) { + /* + * Don't copy too far + */ + int dt = dw; + if (dt + len > count) + dt = count - len; + cnt += dev->height; + if (copy_to_user(buf, tmp + 32, dt)) + return len ? len : -EFAULT; + buf += dt; + len += dt; + } + } + return len; +} + + +/* + * Video4linux interfacing + */ + +static int pms_querycap(struct file *file, void *priv, + struct v4l2_capability *vcap) +{ + struct pms *dev = video_drvdata(file); + + strlcpy(vcap->driver, dev->v4l2_dev.name, sizeof(vcap->driver)); + strlcpy(vcap->card, "Mediavision PMS", sizeof(vcap->card)); + snprintf(vcap->bus_info, sizeof(vcap->bus_info), + "ISA:%s", dev->v4l2_dev.name); + vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; + vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int pms_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + static const char *inputs[4] = { + "Composite", + "S-Video", + "Composite (VCR)", + "S-Video (VCR)" + }; + + if (vin->index > 3) + return -EINVAL; + strlcpy(vin->name, inputs[vin->index], sizeof(vin->name)); + vin->type = V4L2_INPUT_TYPE_CAMERA; + vin->audioset = 0; + vin->tuner = 0; + vin->std = V4L2_STD_ALL; + vin->status = 0; + return 0; +} + +static int pms_g_input(struct file *file, void *fh, unsigned int *inp) +{ + struct pms *dev = video_drvdata(file); + + *inp = dev->input; + return 0; +} + +static int pms_s_input(struct file *file, void *fh, unsigned int inp) +{ + struct pms *dev = video_drvdata(file); + + if (inp > 3) + return -EINVAL; + + dev->input = inp; + pms_videosource(dev, inp & 1); + pms_vcrinput(dev, inp >> 1); + return 0; +} + +static int pms_g_std(struct file *file, void *fh, v4l2_std_id *std) +{ + struct pms *dev = video_drvdata(file); + + *std = dev->std; + return 0; +} + +static int pms_s_std(struct file *file, void *fh, v4l2_std_id std) +{ + struct pms *dev = video_drvdata(file); + int ret = 0; + + dev->std = std; + if (dev->std & V4L2_STD_NTSC) { + pms_framerate(dev, 30); + pms_secamcross(dev, 0); + pms_format(dev, 1); + } else if (dev->std & V4L2_STD_PAL) { + pms_framerate(dev, 25); + pms_secamcross(dev, 0); + pms_format(dev, 2); + } else if (dev->std & V4L2_STD_SECAM) { + pms_framerate(dev, 25); + pms_secamcross(dev, 1); + pms_format(dev, 2); + } else { + ret = -EINVAL; + } + /* + switch (v->mode) { + case VIDEO_MODE_AUTO: + pms_framerate(dev, 25); + pms_secamcross(dev, 0); + pms_format(dev, 0); + break; + }*/ + return ret; +} + +static int pms_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct pms *dev = container_of(ctrl->handler, struct pms, hdl); + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + pms_brightness(dev, ctrl->val); + break; + case V4L2_CID_CONTRAST: + pms_contrast(dev, ctrl->val); + break; + case V4L2_CID_SATURATION: + pms_saturation(dev, ctrl->val); + break; + case V4L2_CID_HUE: + pms_hue(dev, ctrl->val); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int pms_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct pms *dev = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + pix->width = dev->width; + pix->height = dev->height; + pix->pixelformat = dev->width == 15 ? + V4L2_PIX_FMT_RGB555 : V4L2_PIX_FMT_RGB565; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = 2 * dev->width; + pix->sizeimage = 2 * dev->width * dev->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SRGB; + return 0; +} + +static int pms_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->height < 16 || pix->height > 480) + return -EINVAL; + if (pix->width < 16 || pix->width > 640) + return -EINVAL; + if (pix->pixelformat != V4L2_PIX_FMT_RGB555 && + pix->pixelformat != V4L2_PIX_FMT_RGB565) + return -EINVAL; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = 2 * pix->width; + pix->sizeimage = 2 * pix->width * pix->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SRGB; + return 0; +} + +static int pms_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct pms *dev = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + int ret = pms_try_fmt_vid_cap(file, fh, fmt); + + if (ret) + return ret; + dev->width = pix->width; + dev->height = pix->height; + dev->depth = (pix->pixelformat == V4L2_PIX_FMT_RGB555) ? 15 : 16; + pms_resolution(dev, dev->width, dev->height); + /* Ok we figured out what to use from our wide choice */ + return 0; +} + +static int pms_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "RGB 5:5:5", V4L2_PIX_FMT_RGB555, + { 0, 0, 0, 0 } + }, + { 1, 0, 0, + "RGB 5:6:5", V4L2_PIX_FMT_RGB565, + { 0, 0, 0, 0 } + }, + }; + enum v4l2_buf_type type = fmt->type; + + if (fmt->index > 1) + return -EINVAL; + + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; +} + +static ssize_t pms_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct pms *dev = video_drvdata(file); + int len; + + len = pms_capture(dev, buf, (dev->depth == 15), count); + return len; +} + +static unsigned int pms_poll(struct file *file, struct poll_table_struct *wait) +{ + struct v4l2_fh *fh = file->private_data; + unsigned int res = POLLIN | POLLRDNORM; + + if (v4l2_event_pending(fh)) + res |= POLLPRI; + poll_wait(file, &fh->wait, wait); + return res; +} + +static const struct v4l2_file_operations pms_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = pms_poll, + .unlocked_ioctl = video_ioctl2, + .read = pms_read, +}; + +static const struct v4l2_ioctl_ops pms_ioctl_ops = { + .vidioc_querycap = pms_querycap, + .vidioc_g_input = pms_g_input, + .vidioc_s_input = pms_s_input, + .vidioc_enum_input = pms_enum_input, + .vidioc_g_std = pms_g_std, + .vidioc_s_std = pms_s_std, + .vidioc_enum_fmt_vid_cap = pms_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = pms_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = pms_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = pms_try_fmt_vid_cap, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/* + * Probe for and initialise the Mediavision PMS + */ + +static int init_mediavision(struct pms *dev) +{ + int idec, decst; + int i; + static const unsigned char i2c_defs[] = { + 0x4c, 0x30, 0x00, 0xe8, + 0xb6, 0xe2, 0x00, 0x00, + 0xff, 0xff, 0x00, 0x00, + 0x00, 0x00, 0x78, 0x98, + 0x00, 0x00, 0x00, 0x00, + 0x34, 0x0a, 0xf4, 0xce, + 0xe4 + }; + + dev->mem = ioremap(mem_base, 0x800); + if (!dev->mem) + return -ENOMEM; + + if (!request_region(0x9a01, 1, "Mediavision PMS config")) { + printk(KERN_WARNING "mediavision: unable to detect: 0x9a01 in use.\n"); + iounmap(dev->mem); + return -EBUSY; + } + if (!request_region(dev->io, 3, "Mediavision PMS")) { + printk(KERN_WARNING "mediavision: I/O port %d in use.\n", dev->io); + release_region(0x9a01, 1); + iounmap(dev->mem); + return -EBUSY; + } + outb(0xb8, 0x9a01); /* Unlock */ + outb(dev->io >> 4, 0x9a01); /* Set IO port */ + + + decst = pms_i2c_stat(dev, 0x43); + + if (decst != -1) + idec = 2; + else if (pms_i2c_stat(dev, 0xb9) != -1) + idec = 3; + else if (pms_i2c_stat(dev, 0x8b) != -1) + idec = 1; + else + idec = 0; + + printk(KERN_INFO "PMS type is %d\n", idec); + if (idec == 0) { + release_region(dev->io, 3); + release_region(0x9a01, 1); + iounmap(dev->mem); + return -ENODEV; + } + + /* + * Ok we have a PMS of some sort + */ + + mvv_write(dev, 0x04, mem_base >> 12); /* Set the memory area */ + + /* Ok now load the defaults */ + + for (i = 0; i < 0x19; i++) { + if (i2c_defs[i] == 0xff) + pms_i2c_andor(dev, 0x8a, i, 0x07, 0x00); + else + pms_i2c_write(dev, 0x8a, i, i2c_defs[i]); + } + + pms_i2c_write(dev, 0xb8, 0x00, 0x12); + pms_i2c_write(dev, 0xb8, 0x04, 0x00); + pms_i2c_write(dev, 0xb8, 0x07, 0x00); + pms_i2c_write(dev, 0xb8, 0x08, 0x00); + pms_i2c_write(dev, 0xb8, 0x09, 0xff); + pms_i2c_write(dev, 0xb8, 0x0a, 0x00); + pms_i2c_write(dev, 0xb8, 0x0b, 0x10); + pms_i2c_write(dev, 0xb8, 0x10, 0x03); + + mvv_write(dev, 0x01, 0x00); + mvv_write(dev, 0x05, 0xa0); + mvv_write(dev, 0x08, 0x25); + mvv_write(dev, 0x09, 0x00); + mvv_write(dev, 0x0a, 0x20 | MVVMEMORYWIDTH); + + mvv_write(dev, 0x10, 0x02); + mvv_write(dev, 0x1e, 0x0c); + mvv_write(dev, 0x1f, 0x03); + mvv_write(dev, 0x26, 0x06); + + mvv_write(dev, 0x2b, 0x00); + mvv_write(dev, 0x2c, 0x20); + mvv_write(dev, 0x2d, 0x00); + mvv_write(dev, 0x2f, 0x70); + mvv_write(dev, 0x32, 0x00); + mvv_write(dev, 0x33, MVVMEMORYWIDTH); + mvv_write(dev, 0x34, 0x00); + mvv_write(dev, 0x35, 0x00); + mvv_write(dev, 0x3a, 0x80); + mvv_write(dev, 0x3b, 0x10); + mvv_write(dev, 0x20, 0x00); + mvv_write(dev, 0x21, 0x00); + mvv_write(dev, 0x30, 0x22); + return 0; +} + +/* + * Initialization and module stuff + */ + +#ifndef MODULE +static int enable; +module_param(enable, int, 0); +#endif + +static const struct v4l2_ctrl_ops pms_ctrl_ops = { + .s_ctrl = pms_s_ctrl, +}; + +static int pms_probe(struct device *pdev, unsigned int card) +{ + struct pms *dev; + struct v4l2_device *v4l2_dev; + struct v4l2_ctrl_handler *hdl; + int res; + +#ifndef MODULE + if (!enable) { + pr_err("PMS: not enabled, use pms.enable=1 to probe\n"); + return -ENODEV; + } +#endif + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) + return -ENOMEM; + + dev->decoder = PHILIPS2; + dev->io = io_port; + dev->data = io_port + 1; + v4l2_dev = &dev->v4l2_dev; + hdl = &dev->hdl; + + res = v4l2_device_register(pdev, v4l2_dev); + if (res < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + goto free_dev; + } + v4l2_info(v4l2_dev, "Mediavision Pro Movie Studio driver 0.05\n"); + + res = init_mediavision(dev); + if (res) { + v4l2_err(v4l2_dev, "Board not found.\n"); + goto free_io; + } + + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &pms_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 139); + v4l2_ctrl_new_std(hdl, &pms_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 70); + v4l2_ctrl_new_std(hdl, &pms_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 64); + v4l2_ctrl_new_std(hdl, &pms_ctrl_ops, + V4L2_CID_HUE, 0, 255, 1, 0); + if (hdl->error) { + res = hdl->error; + goto free_hdl; + } + + mutex_init(&dev->lock); + strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); + dev->vdev.v4l2_dev = v4l2_dev; + dev->vdev.ctrl_handler = hdl; + dev->vdev.fops = &pms_fops; + dev->vdev.ioctl_ops = &pms_ioctl_ops; + dev->vdev.release = video_device_release_empty; + dev->vdev.lock = &dev->lock; + dev->vdev.tvnorms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM; + set_bit(V4L2_FL_USE_FH_PRIO, &dev->vdev.flags); + video_set_drvdata(&dev->vdev, dev); + dev->std = V4L2_STD_NTSC_M; + dev->height = 240; + dev->width = 320; + dev->depth = 16; + pms_swsense(dev, 75); + pms_resolution(dev, 320, 240); + pms_videosource(dev, 0); + pms_vcrinput(dev, 0); + v4l2_ctrl_handler_setup(hdl); + res = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, video_nr); + if (res >= 0) + return 0; + +free_hdl: + v4l2_ctrl_handler_free(hdl); + v4l2_device_unregister(&dev->v4l2_dev); +free_io: + release_region(dev->io, 3); + release_region(0x9a01, 1); + iounmap(dev->mem); +free_dev: + kfree(dev); + return res; +} + +static int pms_remove(struct device *pdev, unsigned int card) +{ + struct pms *dev = dev_get_drvdata(pdev); + + video_unregister_device(&dev->vdev); + v4l2_ctrl_handler_free(&dev->hdl); + release_region(dev->io, 3); + release_region(0x9a01, 1); + iounmap(dev->mem); + return 0; +} + +static struct isa_driver pms_driver = { + .probe = pms_probe, + .remove = pms_remove, + .driver = { + .name = "pms", + }, +}; + +static int __init pms_init(void) +{ + return isa_register_driver(&pms_driver, 1); +} + +static void __exit pms_exit(void) +{ + isa_unregister_driver(&pms_driver); +} + +module_init(pms_init); +module_exit(pms_exit); diff --git a/drivers/media/parport/w9966.c b/drivers/media/parport/w9966.c new file mode 100644 index 00000000..db2a6003 --- /dev/null +++ b/drivers/media/parport/w9966.c @@ -0,0 +1,981 @@ +/* + Winbond w9966cf Webcam parport driver. + + Version 0.33 + + Copyright (C) 2001 Jakob Kemi + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ +/* + Supported devices: + *Lifeview FlyCam Supra (using the Philips saa7111a chip) + + Does any other model using the w9966 interface chip exist ? + + Todo: + + *Add a working EPP mode, since DMA ECP read isn't implemented + in the parport drivers. (That's why it's so sloow) + + *Add support for other ccd-control chips than the saa7111 + please send me feedback on what kind of chips you have. + + *Add proper probing. I don't know what's wrong with the IEEE1284 + parport drivers but (IEEE1284_MODE_NIBBLE|IEEE1284_DEVICE_ID) + and nibble read seems to be broken for some peripherals. + + *Add probing for onboard SRAM, port directions etc. (if possible) + + *Add support for the hardware compressed modes (maybe using v4l2) + + *Fix better support for the capture window (no skewed images, v4l + interface to capt. window) + + *Probably some bugs that I don't know of + + Please support me by sending feedback! + + Changes: + + Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE + and owner support for newer module locks +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/*#define DEBUG*/ /* Undef me for production */ + +#ifdef DEBUG +#define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __func__ , ##a) +#else +#define DPRINTF(x...) +#endif + +/* + * Defines, simple typedefs etc. + */ + +#define W9966_DRIVERNAME "W9966CF Webcam" +#define W9966_MAXCAMS 4 /* Maximum number of cameras */ +#define W9966_RBUFFER 2048 /* Read buffer (must be an even number) */ +#define W9966_SRAMSIZE 131072 /* 128kb */ +#define W9966_SRAMID 0x02 /* check w9966cf.pdf */ + +/* Empirically determined window limits */ +#define W9966_WND_MIN_X 16 +#define W9966_WND_MIN_Y 14 +#define W9966_WND_MAX_X 705 +#define W9966_WND_MAX_Y 253 +#define W9966_WND_MAX_W (W9966_WND_MAX_X - W9966_WND_MIN_X) +#define W9966_WND_MAX_H (W9966_WND_MAX_Y - W9966_WND_MIN_Y) + +/* Keep track of our current state */ +#define W9966_STATE_PDEV 0x01 +#define W9966_STATE_CLAIMED 0x02 +#define W9966_STATE_VDEV 0x04 + +#define W9966_I2C_W_ID 0x48 +#define W9966_I2C_R_ID 0x49 +#define W9966_I2C_R_DATA 0x08 +#define W9966_I2C_R_CLOCK 0x04 +#define W9966_I2C_W_DATA 0x02 +#define W9966_I2C_W_CLOCK 0x01 + +struct w9966 { + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler hdl; + unsigned char dev_state; + unsigned char i2c_state; + unsigned short ppmode; + struct parport *pport; + struct pardevice *pdev; + struct video_device vdev; + unsigned short width; + unsigned short height; + unsigned char brightness; + signed char contrast; + signed char color; + signed char hue; + struct mutex lock; +}; + +/* + * Module specific properties + */ + +MODULE_AUTHOR("Jakob Kemi "); +MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.33.1"); + +#ifdef MODULE +static char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; +#else +static char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"}; +#endif +module_param_array(pardev, charp, NULL, 0); +MODULE_PARM_DESC(pardev, "pardev: where to search for\n" + "\teach camera. 'aggressive' means brute-force search.\n" + "\tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n" + "\tcam 1 to parport3 and search every parport for cam 2 etc..."); + +static int parmode; +module_param(parmode, int, 0); +MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp"); + +static int video_nr = -1; +module_param(video_nr, int, 0); + +static struct w9966 w9966_cams[W9966_MAXCAMS]; + +/* + * Private function defines + */ + + +/* Set camera phase flags, so we know what to uninit when terminating */ +static inline void w9966_set_state(struct w9966 *cam, int mask, int val) +{ + cam->dev_state = (cam->dev_state & ~mask) ^ val; +} + +/* Get camera phase flags */ +static inline int w9966_get_state(struct w9966 *cam, int mask, int val) +{ + return ((cam->dev_state & mask) == val); +} + +/* Claim parport for ourself */ +static void w9966_pdev_claim(struct w9966 *cam) +{ + if (w9966_get_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED)) + return; + parport_claim_or_block(cam->pdev); + w9966_set_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED); +} + +/* Release parport for others to use */ +static void w9966_pdev_release(struct w9966 *cam) +{ + if (w9966_get_state(cam, W9966_STATE_CLAIMED, 0)) + return; + parport_release(cam->pdev); + w9966_set_state(cam, W9966_STATE_CLAIMED, 0); +} + +/* Read register from W9966 interface-chip + Expects a claimed pdev + -1 on error, else register data (byte) */ +static int w9966_read_reg(struct w9966 *cam, int reg) +{ + /* ECP, read, regtransfer, REG, REG, REG, REG, REG */ + const unsigned char addr = 0x80 | (reg & 0x1f); + unsigned char val; + + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) + return -1; + if (parport_write(cam->pport, &addr, 1) != 1) + return -1; + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0) + return -1; + if (parport_read(cam->pport, &val, 1) != 1) + return -1; + + return val; +} + +/* Write register to W9966 interface-chip + Expects a claimed pdev + -1 on error */ +static int w9966_write_reg(struct w9966 *cam, int reg, int data) +{ + /* ECP, write, regtransfer, REG, REG, REG, REG, REG */ + const unsigned char addr = 0xc0 | (reg & 0x1f); + const unsigned char val = data; + + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) + return -1; + if (parport_write(cam->pport, &addr, 1) != 1) + return -1; + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0) + return -1; + if (parport_write(cam->pport, &val, 1) != 1) + return -1; + + return 0; +} + +/* + * Ugly and primitive i2c protocol functions + */ + +/* Sets the data line on the i2c bus. + Expects a claimed pdev. */ +static void w9966_i2c_setsda(struct w9966 *cam, int state) +{ + if (state) + cam->i2c_state |= W9966_I2C_W_DATA; + else + cam->i2c_state &= ~W9966_I2C_W_DATA; + + w9966_write_reg(cam, 0x18, cam->i2c_state); + udelay(5); +} + +/* Get peripheral clock line + Expects a claimed pdev. */ +static int w9966_i2c_getscl(struct w9966 *cam) +{ + const unsigned char state = w9966_read_reg(cam, 0x18); + return ((state & W9966_I2C_R_CLOCK) > 0); +} + +/* Sets the clock line on the i2c bus. + Expects a claimed pdev. -1 on error */ +static int w9966_i2c_setscl(struct w9966 *cam, int state) +{ + unsigned long timeout; + + if (state) + cam->i2c_state |= W9966_I2C_W_CLOCK; + else + cam->i2c_state &= ~W9966_I2C_W_CLOCK; + + w9966_write_reg(cam, 0x18, cam->i2c_state); + udelay(5); + + /* we go to high, we also expect the peripheral to ack. */ + if (state) { + timeout = jiffies + 100; + while (!w9966_i2c_getscl(cam)) { + if (time_after(jiffies, timeout)) + return -1; + } + } + return 0; +} + +#if 0 +/* Get peripheral data line + Expects a claimed pdev. */ +static int w9966_i2c_getsda(struct w9966 *cam) +{ + const unsigned char state = w9966_read_reg(cam, 0x18); + return ((state & W9966_I2C_R_DATA) > 0); +} +#endif + +/* Write a byte with ack to the i2c bus. + Expects a claimed pdev. -1 on error */ +static int w9966_i2c_wbyte(struct w9966 *cam, int data) +{ + int i; + + for (i = 7; i >= 0; i--) { + w9966_i2c_setsda(cam, (data >> i) & 0x01); + + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + w9966_i2c_setscl(cam, 0); + } + + w9966_i2c_setsda(cam, 1); + + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + w9966_i2c_setscl(cam, 0); + + return 0; +} + +/* Read a data byte with ack from the i2c-bus + Expects a claimed pdev. -1 on error */ +#if 0 +static int w9966_i2c_rbyte(struct w9966 *cam) +{ + unsigned char data = 0x00; + int i; + + w9966_i2c_setsda(cam, 1); + + for (i = 0; i < 8; i++) { + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + data = data << 1; + if (w9966_i2c_getsda(cam)) + data |= 0x01; + + w9966_i2c_setscl(cam, 0); + } + return data; +} +#endif + +/* Read a register from the i2c device. + Expects claimed pdev. -1 on error */ +#if 0 +static int w9966_read_reg_i2c(struct w9966 *cam, int reg) +{ + int data; + + w9966_i2c_setsda(cam, 0); + w9966_i2c_setscl(cam, 0); + + if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 || + w9966_i2c_wbyte(cam, reg) == -1) + return -1; + + w9966_i2c_setsda(cam, 1); + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + w9966_i2c_setsda(cam, 0); + w9966_i2c_setscl(cam, 0); + + if (w9966_i2c_wbyte(cam, W9966_I2C_R_ID) == -1) + return -1; + data = w9966_i2c_rbyte(cam); + if (data == -1) + return -1; + + w9966_i2c_setsda(cam, 0); + + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + w9966_i2c_setsda(cam, 1); + + return data; +} +#endif + +/* Write a register to the i2c device. + Expects claimed pdev. -1 on error */ +static int w9966_write_reg_i2c(struct w9966 *cam, int reg, int data) +{ + w9966_i2c_setsda(cam, 0); + w9966_i2c_setscl(cam, 0); + + if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 || + w9966_i2c_wbyte(cam, reg) == -1 || + w9966_i2c_wbyte(cam, data) == -1) + return -1; + + w9966_i2c_setsda(cam, 0); + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + + w9966_i2c_setsda(cam, 1); + + return 0; +} + +/* Find a good length for capture window (used both for W and H) + A bit ugly but pretty functional. The capture length + have to match the downscale */ +static int w9966_findlen(int near, int size, int maxlen) +{ + int bestlen = size; + int besterr = abs(near - bestlen); + int len; + + for (len = size + 1; len < maxlen; len++) { + int err; + if (((64 * size) % len) != 0) + continue; + + err = abs(near - len); + + /* Only continue as long as we keep getting better values */ + if (err > besterr) + break; + + besterr = err; + bestlen = len; + } + + return bestlen; +} + +/* Modify capture window (if necessary) + and calculate downscaling + Return -1 on error */ +static int w9966_calcscale(int size, int min, int max, int *beg, int *end, unsigned char *factor) +{ + int maxlen = max - min; + int len = *end - *beg + 1; + int newlen = w9966_findlen(len, size, maxlen); + int err = newlen - len; + + /* Check for bad format */ + if (newlen > maxlen || newlen < size) + return -1; + + /* Set factor (6 bit fixed) */ + *factor = (64 * size) / newlen; + if (*factor == 64) + *factor = 0x00; /* downscale is disabled */ + else + *factor |= 0x80; /* set downscale-enable bit */ + + /* Modify old beginning and end */ + *beg -= err / 2; + *end += err - (err / 2); + + /* Move window if outside borders */ + if (*beg < min) { + *end += min - *beg; + *beg += min - *beg; + } + if (*end > max) { + *beg -= *end - max; + *end -= *end - max; + } + + return 0; +} + +/* Setup the cameras capture window etc. + Expects a claimed pdev + return -1 on error */ +static int w9966_setup(struct w9966 *cam, int x1, int y1, int x2, int y2, int w, int h) +{ + unsigned int i; + unsigned int enh_s, enh_e; + unsigned char scale_x, scale_y; + unsigned char regs[0x1c]; + unsigned char saa7111_regs[] = { + 0x21, 0x00, 0xd8, 0x23, 0x00, 0x80, 0x80, 0x00, + 0x88, 0x10, 0x80, 0x40, 0x40, 0x00, 0x01, 0x00, + 0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0 + }; + + + if (w * h * 2 > W9966_SRAMSIZE) { + DPRINTF("capture window exceeds SRAM size!.\n"); + w = 200; h = 160; /* Pick default values */ + } + + w &= ~0x1; + if (w < 2) + w = 2; + if (h < 1) + h = 1; + if (w > W9966_WND_MAX_W) + w = W9966_WND_MAX_W; + if (h > W9966_WND_MAX_H) + h = W9966_WND_MAX_H; + + cam->width = w; + cam->height = h; + + enh_s = 0; + enh_e = w * h * 2; + + /* Modify capture window if necessary and calculate downscaling */ + if (w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 || + w9966_calcscale(h, W9966_WND_MIN_Y, W9966_WND_MAX_Y, &y1, &y2, &scale_y) != 0) + return -1; + + DPRINTF("%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n", + w, h, x1, x2, y1, y2, scale_x & ~0x80, scale_y & ~0x80); + + /* Setup registers */ + regs[0x00] = 0x00; /* Set normal operation */ + regs[0x01] = 0x18; /* Capture mode */ + regs[0x02] = scale_y; /* V-scaling */ + regs[0x03] = scale_x; /* H-scaling */ + + /* Capture window */ + regs[0x04] = (x1 & 0x0ff); /* X-start (8 low bits) */ + regs[0x05] = (x1 & 0x300)>>8; /* X-start (2 high bits) */ + regs[0x06] = (y1 & 0x0ff); /* Y-start (8 low bits) */ + regs[0x07] = (y1 & 0x300)>>8; /* Y-start (2 high bits) */ + regs[0x08] = (x2 & 0x0ff); /* X-end (8 low bits) */ + regs[0x09] = (x2 & 0x300)>>8; /* X-end (2 high bits) */ + regs[0x0a] = (y2 & 0x0ff); /* Y-end (8 low bits) */ + + regs[0x0c] = W9966_SRAMID; /* SRAM-banks (1x 128kb) */ + + /* Enhancement layer */ + regs[0x0d] = (enh_s & 0x000ff); /* Enh. start (0-7) */ + regs[0x0e] = (enh_s & 0x0ff00) >> 8; /* Enh. start (8-15) */ + regs[0x0f] = (enh_s & 0x70000) >> 16; /* Enh. start (16-17/18??) */ + regs[0x10] = (enh_e & 0x000ff); /* Enh. end (0-7) */ + regs[0x11] = (enh_e & 0x0ff00) >> 8; /* Enh. end (8-15) */ + regs[0x12] = (enh_e & 0x70000) >> 16; /* Enh. end (16-17/18??) */ + + /* Misc */ + regs[0x13] = 0x40; /* VEE control (raw 4:2:2) */ + regs[0x17] = 0x00; /* ??? */ + regs[0x18] = cam->i2c_state = 0x00; /* Serial bus */ + regs[0x19] = 0xff; /* I/O port direction control */ + regs[0x1a] = 0xff; /* I/O port data register */ + regs[0x1b] = 0x10; /* ??? */ + + /* SAA7111 chip settings */ + saa7111_regs[0x0a] = cam->brightness; + saa7111_regs[0x0b] = cam->contrast; + saa7111_regs[0x0c] = cam->color; + saa7111_regs[0x0d] = cam->hue; + + /* Reset (ECP-fifo & serial-bus) */ + if (w9966_write_reg(cam, 0x00, 0x03) == -1) + return -1; + + /* Write regs to w9966cf chip */ + for (i = 0; i < 0x1c; i++) + if (w9966_write_reg(cam, i, regs[i]) == -1) + return -1; + + /* Write regs to saa7111 chip */ + for (i = 0; i < 0x20; i++) + if (w9966_write_reg_i2c(cam, i, saa7111_regs[i]) == -1) + return -1; + + return 0; +} + +/* + * Video4linux interfacing + */ + +static int cam_querycap(struct file *file, void *priv, + struct v4l2_capability *vcap) +{ + struct w9966 *cam = video_drvdata(file); + + strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver)); + strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card)); + strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); + vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; + vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int cam_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + if (vin->index > 0) + return -EINVAL; + strlcpy(vin->name, "Camera", sizeof(vin->name)); + vin->type = V4L2_INPUT_TYPE_CAMERA; + vin->audioset = 0; + vin->tuner = 0; + vin->std = 0; + vin->status = 0; + return 0; +} + +static int cam_g_input(struct file *file, void *fh, unsigned int *inp) +{ + *inp = 0; + return 0; +} + +static int cam_s_input(struct file *file, void *fh, unsigned int inp) +{ + return (inp > 0) ? -EINVAL : 0; +} + +static int cam_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct w9966 *cam = + container_of(ctrl->handler, struct w9966, hdl); + int ret = 0; + + mutex_lock(&cam->lock); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + cam->brightness = ctrl->val; + break; + case V4L2_CID_CONTRAST: + cam->contrast = ctrl->val; + break; + case V4L2_CID_SATURATION: + cam->color = ctrl->val; + break; + case V4L2_CID_HUE: + cam->hue = ctrl->val; + break; + default: + ret = -EINVAL; + break; + } + + if (ret == 0) { + w9966_pdev_claim(cam); + + if (w9966_write_reg_i2c(cam, 0x0a, cam->brightness) == -1 || + w9966_write_reg_i2c(cam, 0x0b, cam->contrast) == -1 || + w9966_write_reg_i2c(cam, 0x0c, cam->color) == -1 || + w9966_write_reg_i2c(cam, 0x0d, cam->hue) == -1) { + ret = -EIO; + } + + w9966_pdev_release(cam); + } + mutex_unlock(&cam->lock); + return ret; +} + +static int cam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct w9966 *cam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + pix->width = cam->width; + pix->height = cam->height; + pix->pixelformat = V4L2_PIX_FMT_YUYV; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = 2 * cam->width; + pix->sizeimage = 2 * cam->width * cam->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int cam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->width < 2) + pix->width = 2; + if (pix->height < 1) + pix->height = 1; + if (pix->width > W9966_WND_MAX_W) + pix->width = W9966_WND_MAX_W; + if (pix->height > W9966_WND_MAX_H) + pix->height = W9966_WND_MAX_H; + pix->pixelformat = V4L2_PIX_FMT_YUYV; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = 2 * pix->width; + pix->sizeimage = 2 * pix->width * pix->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int cam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct w9966 *cam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + int ret = cam_try_fmt_vid_cap(file, fh, fmt); + + if (ret) + return ret; + + mutex_lock(&cam->lock); + /* Update camera regs */ + w9966_pdev_claim(cam); + ret = w9966_setup(cam, 0, 0, 1023, 1023, pix->width, pix->height); + w9966_pdev_release(cam); + mutex_unlock(&cam->lock); + return ret; +} + +static int cam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "YUV 4:2:2", V4L2_PIX_FMT_YUYV, + { 0, 0, 0, 0 } + }, + }; + enum v4l2_buf_type type = fmt->type; + + if (fmt->index > 0) + return -EINVAL; + + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; +} + +/* Capture data */ +static ssize_t w9966_v4l_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct w9966 *cam = video_drvdata(file); + unsigned char addr = 0xa0; /* ECP, read, CCD-transfer, 00000 */ + unsigned char __user *dest = (unsigned char __user *)buf; + unsigned long dleft = count; + unsigned char *tbuf; + + /* Why would anyone want more than this?? */ + if (count > cam->width * cam->height * 2) + return -EINVAL; + + mutex_lock(&cam->lock); + w9966_pdev_claim(cam); + w9966_write_reg(cam, 0x00, 0x02); /* Reset ECP-FIFO buffer */ + w9966_write_reg(cam, 0x00, 0x00); /* Return to normal operation */ + w9966_write_reg(cam, 0x01, 0x98); /* Enable capture */ + + /* write special capture-addr and negotiate into data transfer */ + if ((parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0) || + (parport_write(cam->pport, &addr, 1) != 1) || + (parport_negotiate(cam->pport, cam->ppmode|IEEE1284_DATA) != 0)) { + w9966_pdev_release(cam); + mutex_unlock(&cam->lock); + return -EFAULT; + } + + tbuf = kmalloc(W9966_RBUFFER, GFP_KERNEL); + if (tbuf == NULL) { + count = -ENOMEM; + goto out; + } + + while (dleft > 0) { + unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft; + + if (parport_read(cam->pport, tbuf, tsize) < tsize) { + count = -EFAULT; + goto out; + } + if (copy_to_user(dest, tbuf, tsize) != 0) { + count = -EFAULT; + goto out; + } + dest += tsize; + dleft -= tsize; + } + + w9966_write_reg(cam, 0x01, 0x18); /* Disable capture */ + +out: + kfree(tbuf); + w9966_pdev_release(cam); + mutex_unlock(&cam->lock); + + return count; +} + +static const struct v4l2_file_operations w9966_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, + .read = w9966_v4l_read, +}; + +static const struct v4l2_ioctl_ops w9966_ioctl_ops = { + .vidioc_querycap = cam_querycap, + .vidioc_g_input = cam_g_input, + .vidioc_s_input = cam_s_input, + .vidioc_enum_input = cam_enum_input, + .vidioc_enum_fmt_vid_cap = cam_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = cam_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = cam_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = cam_try_fmt_vid_cap, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_ctrl_ops cam_ctrl_ops = { + .s_ctrl = cam_s_ctrl, +}; + + +/* Initialize camera device. Setup all internal flags, set a + default video mode, setup ccd-chip, register v4l device etc.. + Also used for 'probing' of hardware. + -1 on error */ +static int w9966_init(struct w9966 *cam, struct parport *port) +{ + struct v4l2_device *v4l2_dev = &cam->v4l2_dev; + + if (cam->dev_state != 0) + return -1; + + strlcpy(v4l2_dev->name, "w9966", sizeof(v4l2_dev->name)); + + if (v4l2_device_register(NULL, v4l2_dev) < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + return -1; + } + + v4l2_ctrl_handler_init(&cam->hdl, 4); + v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, + V4L2_CID_CONTRAST, -64, 64, 1, 64); + v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, + V4L2_CID_SATURATION, -64, 64, 1, 64); + v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + if (cam->hdl.error) { + v4l2_err(v4l2_dev, "couldn't register controls\n"); + return -1; + } + cam->pport = port; + cam->brightness = 128; + cam->contrast = 64; + cam->color = 64; + cam->hue = 0; + + /* Select requested transfer mode */ + switch (parmode) { + default: /* Auto-detect (priority: hw-ecp, hw-epp, sw-ecp) */ + case 0: + if (port->modes & PARPORT_MODE_ECP) + cam->ppmode = IEEE1284_MODE_ECP; + else if (port->modes & PARPORT_MODE_EPP) + cam->ppmode = IEEE1284_MODE_EPP; + else + cam->ppmode = IEEE1284_MODE_ECP; + break; + case 1: /* hw- or sw-ecp */ + cam->ppmode = IEEE1284_MODE_ECP; + break; + case 2: /* hw- or sw-epp */ + cam->ppmode = IEEE1284_MODE_EPP; + break; + } + + /* Tell the parport driver that we exists */ + cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL); + if (cam->pdev == NULL) { + DPRINTF("parport_register_device() failed\n"); + return -1; + } + w9966_set_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV); + + w9966_pdev_claim(cam); + + /* Setup a default capture mode */ + if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) { + DPRINTF("w9966_setup() failed.\n"); + return -1; + } + + w9966_pdev_release(cam); + + /* Fill in the video_device struct and register us to v4l */ + strlcpy(cam->vdev.name, W9966_DRIVERNAME, sizeof(cam->vdev.name)); + cam->vdev.v4l2_dev = v4l2_dev; + cam->vdev.fops = &w9966_fops; + cam->vdev.ioctl_ops = &w9966_ioctl_ops; + cam->vdev.release = video_device_release_empty; + cam->vdev.ctrl_handler = &cam->hdl; + set_bit(V4L2_FL_USE_FH_PRIO, &cam->vdev.flags); + video_set_drvdata(&cam->vdev, cam); + + mutex_init(&cam->lock); + + if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) + return -1; + + w9966_set_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV); + + /* All ok */ + v4l2_info(v4l2_dev, "Found and initialized a webcam on %s.\n", + cam->pport->name); + return 0; +} + + +/* Terminate everything gracefully */ +static void w9966_term(struct w9966 *cam) +{ + /* Unregister from v4l */ + if (w9966_get_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV)) { + video_unregister_device(&cam->vdev); + w9966_set_state(cam, W9966_STATE_VDEV, 0); + } + + v4l2_ctrl_handler_free(&cam->hdl); + + /* Terminate from IEEE1284 mode and release pdev block */ + if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) { + w9966_pdev_claim(cam); + parport_negotiate(cam->pport, IEEE1284_MODE_COMPAT); + w9966_pdev_release(cam); + } + + /* Unregister from parport */ + if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) { + parport_unregister_device(cam->pdev); + w9966_set_state(cam, W9966_STATE_PDEV, 0); + } + memset(cam, 0, sizeof(*cam)); +} + + +/* Called once for every parport on init */ +static void w9966_attach(struct parport *port) +{ + int i; + + for (i = 0; i < W9966_MAXCAMS; i++) { + if (w9966_cams[i].dev_state != 0) /* Cam is already assigned */ + continue; + if (strcmp(pardev[i], "aggressive") == 0 || strcmp(pardev[i], port->name) == 0) { + if (w9966_init(&w9966_cams[i], port) != 0) + w9966_term(&w9966_cams[i]); + break; /* return */ + } + } +} + +/* Called once for every parport on termination */ +static void w9966_detach(struct parport *port) +{ + int i; + + for (i = 0; i < W9966_MAXCAMS; i++) + if (w9966_cams[i].dev_state != 0 && w9966_cams[i].pport == port) + w9966_term(&w9966_cams[i]); +} + + +static struct parport_driver w9966_ppd = { + .name = W9966_DRIVERNAME, + .attach = w9966_attach, + .detach = w9966_detach, +}; + +/* Module entry point */ +static int __init w9966_mod_init(void) +{ + int i; + + for (i = 0; i < W9966_MAXCAMS; i++) + w9966_cams[i].dev_state = 0; + + return parport_register_driver(&w9966_ppd); +} + +/* Module cleanup */ +static void __exit w9966_mod_term(void) +{ + parport_unregister_driver(&w9966_ppd); +} + +module_init(w9966_mod_init); +module_exit(w9966_mod_term); diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig new file mode 100644 index 00000000..53196f13 --- /dev/null +++ b/drivers/media/pci/Kconfig @@ -0,0 +1,49 @@ +if PCI && MEDIA_SUPPORT + +menuconfig MEDIA_PCI_SUPPORT + bool "Media PCI Adapters" + help + Enable media drivers for PCI/PCIe bus. + If you have such devices, say Y. + +if MEDIA_PCI_SUPPORT + +if MEDIA_CAMERA_SUPPORT + comment "Media capture support" +source "drivers/media/pci/meye/Kconfig" +source "drivers/media/pci/sta2x11/Kconfig" +endif + +if MEDIA_ANALOG_TV_SUPPORT + comment "Media capture/analog TV support" +source "drivers/media/pci/ivtv/Kconfig" +source "drivers/media/pci/zoran/Kconfig" +source "drivers/media/pci/saa7146/Kconfig" +endif + +if MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT + comment "Media capture/analog/hybrid TV support" +source "drivers/media/pci/cx18/Kconfig" +source "drivers/media/pci/cx23885/Kconfig" +source "drivers/media/pci/cx25821/Kconfig" +source "drivers/media/pci/cx88/Kconfig" +source "drivers/media/pci/bt8xx/Kconfig" +source "drivers/media/pci/saa7134/Kconfig" +source "drivers/media/pci/saa7164/Kconfig" + +endif + +if MEDIA_DIGITAL_TV_SUPPORT + comment "Media digital TV PCI Adapters" +source "drivers/media/pci/ttpci/Kconfig" +source "drivers/media/pci/b2c2/Kconfig" +source "drivers/media/pci/pluto2/Kconfig" +source "drivers/media/pci/dm1105/Kconfig" +source "drivers/media/pci/pt1/Kconfig" +source "drivers/media/pci/mantis/Kconfig" +source "drivers/media/pci/ngene/Kconfig" +source "drivers/media/pci/ddbridge/Kconfig" +endif + +endif #MEDIA_PCI_SUPPORT +endif #PCI diff --git a/drivers/media/pci/Makefile b/drivers/media/pci/Makefile new file mode 100644 index 00000000..35cc5786 --- /dev/null +++ b/drivers/media/pci/Makefile @@ -0,0 +1,26 @@ +# +# Makefile for the kernel multimedia device drivers. +# + +obj-y += ttpci/ \ + b2c2/ \ + pluto2/ \ + dm1105/ \ + pt1/ \ + mantis/ \ + ngene/ \ + ddbridge/ \ + b2c2/ \ + saa7146/ + +obj-$(CONFIG_VIDEO_IVTV) += ivtv/ +obj-$(CONFIG_VIDEO_ZORAN) += zoran/ +obj-$(CONFIG_VIDEO_CX18) += cx18/ +obj-$(CONFIG_VIDEO_CX23885) += cx23885/ +obj-$(CONFIG_VIDEO_CX25821) += cx25821/ +obj-$(CONFIG_VIDEO_CX88) += cx88/ +obj-$(CONFIG_VIDEO_BT848) += bt8xx/ +obj-$(CONFIG_VIDEO_SAA7134) += saa7134/ +obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ +obj-$(CONFIG_VIDEO_MEYE) += meye/ +obj-$(CONFIG_STA2X11_VIP) += sta2x11/ diff --git a/drivers/media/pci/b2c2/Kconfig b/drivers/media/pci/b2c2/Kconfig new file mode 100644 index 00000000..58761a21 --- /dev/null +++ b/drivers/media/pci/b2c2/Kconfig @@ -0,0 +1,15 @@ +config DVB_B2C2_FLEXCOP_PCI + tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI" + depends on DVB_CORE && I2C + help + Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2. + + Say Y if you own such a device and want to use it. + +config DVB_B2C2_FLEXCOP_PCI_DEBUG + bool "Enable debug for the B2C2 FlexCop drivers" + depends on DVB_B2C2_FLEXCOP_PCI + select DVB_B2C2_FLEXCOP_DEBUG + help + Say Y if you want to enable the module option to control debug messages + of all B2C2 FlexCop drivers. diff --git a/drivers/media/pci/b2c2/Makefile b/drivers/media/pci/b2c2/Makefile new file mode 100644 index 00000000..b894320a --- /dev/null +++ b/drivers/media/pci/b2c2/Makefile @@ -0,0 +1,9 @@ +ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),) +b2c2-flexcop-pci-objs += flexcop-dma.o +endif + +b2c2-flexcop-pci-objs += flexcop-pci.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o + +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/common/b2c2/ diff --git a/drivers/media/pci/b2c2/flexcop-dma.c b/drivers/media/pci/b2c2/flexcop-dma.c new file mode 100644 index 00000000..2881e0d9 --- /dev/null +++ b/drivers/media/pci/b2c2/flexcop-dma.c @@ -0,0 +1,172 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-dma.c - configuring and controlling the DMA of the FlexCop + * see flexcop.c for copyright information + */ +#include "flexcop.h" + +int flexcop_dma_allocate(struct pci_dev *pdev, + struct flexcop_dma *dma, u32 size) +{ + u8 *tcpu; + dma_addr_t tdma = 0; + + if (size % 2) { + err("dma buffersize has to be even."); + return -EINVAL; + } + + if ((tcpu = pci_alloc_consistent(pdev, size, &tdma)) != NULL) { + dma->pdev = pdev; + dma->cpu_addr0 = tcpu; + dma->dma_addr0 = tdma; + dma->cpu_addr1 = tcpu + size/2; + dma->dma_addr1 = tdma + size/2; + dma->size = size/2; + return 0; + } + return -ENOMEM; +} +EXPORT_SYMBOL(flexcop_dma_allocate); + +void flexcop_dma_free(struct flexcop_dma *dma) +{ + pci_free_consistent(dma->pdev, dma->size*2, + dma->cpu_addr0, dma->dma_addr0); + memset(dma,0,sizeof(struct flexcop_dma)); +} +EXPORT_SYMBOL(flexcop_dma_free); + +int flexcop_dma_config(struct flexcop_device *fc, + struct flexcop_dma *dma, + flexcop_dma_index_t dma_idx) +{ + flexcop_ibi_value v0x0,v0x4,v0xc; + v0x0.raw = v0x4.raw = v0xc.raw = 0; + + v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; + v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; + v0x4.dma_0x4_write.dma_addr_size = dma->size / 4; + + if ((dma_idx & FC_DMA_1) == dma_idx) { + fc->write_ibi_reg(fc,dma1_000,v0x0); + fc->write_ibi_reg(fc,dma1_004,v0x4); + fc->write_ibi_reg(fc,dma1_00c,v0xc); + } else if ((dma_idx & FC_DMA_2) == dma_idx) { + fc->write_ibi_reg(fc,dma2_010,v0x0); + fc->write_ibi_reg(fc,dma2_014,v0x4); + fc->write_ibi_reg(fc,dma2_01c,v0xc); + } else { + err("either DMA1 or DMA2 can be configured within one " + "flexcop_dma_config call."); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(flexcop_dma_config); + +/* start the DMA transfers, but not the DMA IRQs */ +int flexcop_dma_xfer_control(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + flexcop_dma_addr_index_t index, + int onoff) +{ + flexcop_ibi_value v0x0,v0xc; + flexcop_ibi_register r0x0,r0xc; + + if ((dma_idx & FC_DMA_1) == dma_idx) { + r0x0 = dma1_000; + r0xc = dma1_00c; + } else if ((dma_idx & FC_DMA_2) == dma_idx) { + r0x0 = dma2_010; + r0xc = dma2_01c; + } else { + err("either transfer DMA1 or DMA2 can be started within one " + "flexcop_dma_xfer_control call."); + return -EINVAL; + } + + v0x0 = fc->read_ibi_reg(fc,r0x0); + v0xc = fc->read_ibi_reg(fc,r0xc); + + deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw); + deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw); + + if (index & FC_DMA_SUBADDR_0) + v0x0.dma_0x0.dma_0start = onoff; + + if (index & FC_DMA_SUBADDR_1) + v0xc.dma_0xc.dma_1start = onoff; + + fc->write_ibi_reg(fc,r0x0,v0x0); + fc->write_ibi_reg(fc,r0xc,v0xc); + + deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw); + deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_xfer_control); + +static int flexcop_dma_remap(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + int onoff) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + deb_info("%s\n",__func__); + v.dma_0xc.remap_enable = onoff; + fc->write_ibi_reg(fc,r,v); + return 0; +} + +int flexcop_dma_control_size_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, + int onoff) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + + if (no & FC_DMA_1) + v.ctrl_208.DMA1_IRQ_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_IRQ_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_control_size_irq); + +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, + int onoff) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + + if (no & FC_DMA_1) + v.ctrl_208.DMA1_Timer_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_Timer_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_control_timer_irq); + +/* 1 cycles = 1.97 msec */ +int flexcop_dma_config_timer(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, u8 cycles) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + + flexcop_dma_remap(fc,dma_idx,0); + + deb_info("%s\n",__func__); + v.dma_0x4_write.dmatimer = cycles; + fc->write_ibi_reg(fc,r,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_config_timer); + diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c new file mode 100644 index 00000000..44f8fb5f --- /dev/null +++ b/drivers/media/pci/b2c2/flexcop-pci.c @@ -0,0 +1,450 @@ +/* + * Linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-pci.c - covers the PCI part including DMA transfers + * see flexcop.c for copyright information + */ + +#define FC_LOG_PREFIX "flexcop-pci" +#include "flexcop-common.h" + +static int enable_pid_filtering = 1; +module_param(enable_pid_filtering, int, 0444); +MODULE_PARM_DESC(enable_pid_filtering, + "enable hardware pid filtering: supported values: 0 (fullts), 1"); + +static int irq_chk_intv = 100; +module_param(irq_chk_intv, int, 0644); +MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog."); + +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((debug & level)) printk(args); } while (0) +#define DEBSTATUS "" +#else +#define dprintk(level,args...) +#define DEBSTATUS " (debugging is not enabled)" +#endif + +#define deb_info(args...) dprintk(0x01, args) +#define deb_reg(args...) dprintk(0x02, args) +#define deb_ts(args...) dprintk(0x04, args) +#define deb_irq(args...) dprintk(0x08, args) +#define deb_chk(args...) dprintk(0x10, args) + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))." + DEBSTATUS); + +#define DRIVER_VERSION "0.1" +#define DRIVER_NAME "flexcop-pci" +#define DRIVER_AUTHOR "Patrick Boettcher " + +struct flexcop_pci { + struct pci_dev *pdev; + +#define FC_PCI_INIT 0x01 +#define FC_PCI_DMA_INIT 0x02 + int init_state; + + void __iomem *io_mem; + u32 irq; + /* buffersize (at least for DMA1, need to be % 188 == 0, + * this logic is required */ +#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188) +#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188) + struct flexcop_dma dma[2]; + + int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */ + u32 last_dma1_cur_pos; + /* position of the pointer last time the timer/packet irq occurred */ + int count; + int count_prev; + int stream_problem; + + spinlock_t irq_lock; + unsigned long last_irq; + + struct delayed_work irq_check_work; + struct flexcop_device *fc_dev; +}; + +static int lastwreg, lastwval, lastrreg, lastrval; + +static flexcop_ibi_value flexcop_pci_read_ibi_reg(struct flexcop_device *fc, + flexcop_ibi_register r) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + flexcop_ibi_value v; + v.raw = readl(fc_pci->io_mem + r); + + if (lastrreg != r || lastrval != v.raw) { + lastrreg = r; lastrval = v.raw; + deb_reg("new rd: %3x: %08x\n", r, v.raw); + } + + return v; +} + +static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, + flexcop_ibi_register r, flexcop_ibi_value v) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + + if (lastwreg != r || lastwval != v.raw) { + lastwreg = r; lastwval = v.raw; + deb_reg("new wr: %3x: %08x\n", r, v.raw); + } + + writel(v.raw, fc_pci->io_mem + r); + return 0; +} + +static void flexcop_pci_irq_check_work(struct work_struct *work) +{ + struct flexcop_pci *fc_pci = + container_of(work, struct flexcop_pci, irq_check_work.work); + struct flexcop_device *fc = fc_pci->fc_dev; + + if (fc->feedcount) { + + if (fc_pci->count == fc_pci->count_prev) { + deb_chk("no IRQ since the last check\n"); + if (fc_pci->stream_problem++ == 3) { + struct dvb_demux_feed *feed; + deb_info("flexcop-pci: stream problem, resetting pid filter\n"); + + spin_lock_irq(&fc->demux.lock); + list_for_each_entry(feed, &fc->demux.feed_list, + list_head) { + flexcop_pid_feed_control(fc, feed, 0); + } + + list_for_each_entry(feed, &fc->demux.feed_list, + list_head) { + flexcop_pid_feed_control(fc, feed, 1); + } + spin_unlock_irq(&fc->demux.lock); + + fc_pci->stream_problem = 0; + } + } else { + fc_pci->stream_problem = 0; + fc_pci->count_prev = fc_pci->count; + } + } + + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); +} + +/* When PID filtering is turned on, we use the timer IRQ, because small amounts + * of data need to be passed to the user space instantly as well. When PID + * filtering is turned off, we use the page-change-IRQ */ +static irqreturn_t flexcop_pci_isr(int irq, void *dev_id) +{ + struct flexcop_pci *fc_pci = dev_id; + struct flexcop_device *fc = fc_pci->fc_dev; + unsigned long flags; + flexcop_ibi_value v; + irqreturn_t ret = IRQ_HANDLED; + + spin_lock_irqsave(&fc_pci->irq_lock, flags); + v = fc->read_ibi_reg(fc, irq_20c); + + /* errors */ + if (v.irq_20c.Data_receiver_error) + deb_chk("data receiver error\n"); + if (v.irq_20c.Continuity_error_flag) + deb_chk("Contunuity error flag is set\n"); + if (v.irq_20c.LLC_SNAP_FLAG_set) + deb_chk("LLC_SNAP_FLAG_set is set\n"); + if (v.irq_20c.Transport_Error) + deb_chk("Transport error\n"); + + if ((fc_pci->count % 1000) == 0) + deb_chk("%d valid irq took place so far\n", fc_pci->count); + + if (v.irq_20c.DMA1_IRQ_Status == 1) { + if (fc_pci->active_dma1_addr == 0) + flexcop_pass_dmx_packets(fc_pci->fc_dev, + fc_pci->dma[0].cpu_addr0, + fc_pci->dma[0].size / 188); + else + flexcop_pass_dmx_packets(fc_pci->fc_dev, + fc_pci->dma[0].cpu_addr1, + fc_pci->dma[0].size / 188); + + deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr); + fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr; + /* for the timer IRQ we only can use buffer dmx feeding, because we don't have + * complete TS packets when reading from the DMA memory */ + } else if (v.irq_20c.DMA1_Timer_Status == 1) { + dma_addr_t cur_addr = + fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2; + u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0; + + deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, " + "last_cur_pos: %08x ", + jiffies_to_usecs(jiffies - fc_pci->last_irq), + v.raw, (unsigned long long)cur_addr, cur_pos, + fc_pci->last_dma1_cur_pos); + fc_pci->last_irq = jiffies; + + /* buffer end was reached, restarted from the beginning + * pass the data from last_cur_pos to the buffer end to the demux + */ + if (cur_pos < fc_pci->last_dma1_cur_pos) { + deb_irq(" end was reached: passing %d bytes ", + (fc_pci->dma[0].size*2 - 1) - + fc_pci->last_dma1_cur_pos); + flexcop_pass_dmx_data(fc_pci->fc_dev, + fc_pci->dma[0].cpu_addr0 + + fc_pci->last_dma1_cur_pos, + (fc_pci->dma[0].size*2) - + fc_pci->last_dma1_cur_pos); + fc_pci->last_dma1_cur_pos = 0; + } + + if (cur_pos > fc_pci->last_dma1_cur_pos) { + deb_irq(" passing %d bytes ", + cur_pos - fc_pci->last_dma1_cur_pos); + flexcop_pass_dmx_data(fc_pci->fc_dev, + fc_pci->dma[0].cpu_addr0 + + fc_pci->last_dma1_cur_pos, + cur_pos - fc_pci->last_dma1_cur_pos); + } + deb_irq("\n"); + + fc_pci->last_dma1_cur_pos = cur_pos; + fc_pci->count++; + } else { + deb_irq("isr for flexcop called, " + "apparently without reason (%08x)\n", v.raw); + ret = IRQ_NONE; + } + + spin_unlock_irqrestore(&fc_pci->irq_lock, flags); + return ret; +} + +static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + if (onoff) { + flexcop_dma_config(fc, &fc_pci->dma[0], FC_DMA_1); + flexcop_dma_config(fc, &fc_pci->dma[1], FC_DMA_2); + flexcop_dma_config_timer(fc, FC_DMA_1, 0); + flexcop_dma_xfer_control(fc, FC_DMA_1, + FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 1); + deb_irq("DMA xfer enabled\n"); + + fc_pci->last_dma1_cur_pos = 0; + flexcop_dma_control_timer_irq(fc, FC_DMA_1, 1); + deb_irq("IRQ enabled\n"); + fc_pci->count_prev = fc_pci->count; + } else { + flexcop_dma_control_timer_irq(fc, FC_DMA_1, 0); + deb_irq("IRQ disabled\n"); + + flexcop_dma_xfer_control(fc, FC_DMA_1, + FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 0); + deb_irq("DMA xfer disabled\n"); + } + return 0; +} + +static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci) +{ + int ret; + ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[0], + FC_DEFAULT_DMA1_BUFSIZE); + if (ret != 0) + return ret; + + ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[1], + FC_DEFAULT_DMA2_BUFSIZE); + if (ret != 0) { + flexcop_dma_free(&fc_pci->dma[0]); + return ret; + } + + flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_MEDIA | + FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1); + flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_CAO | + FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2); + fc_pci->init_state |= FC_PCI_DMA_INIT; + return ret; +} + +static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci) +{ + if (fc_pci->init_state & FC_PCI_DMA_INIT) { + flexcop_dma_free(&fc_pci->dma[0]); + flexcop_dma_free(&fc_pci->dma[1]); + } + fc_pci->init_state &= ~FC_PCI_DMA_INIT; +} + +static int flexcop_pci_init(struct flexcop_pci *fc_pci) +{ + int ret; + + info("card revision %x", fc_pci->pdev->revision); + + if ((ret = pci_enable_device(fc_pci->pdev)) != 0) + return ret; + pci_set_master(fc_pci->pdev); + + if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0) + goto err_pci_disable_device; + + fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800); + + if (!fc_pci->io_mem) { + err("cannot map io memory\n"); + ret = -EIO; + goto err_pci_release_regions; + } + + pci_set_drvdata(fc_pci->pdev, fc_pci); + spin_lock_init(&fc_pci->irq_lock); + if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr, + IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0) + goto err_pci_iounmap; + + fc_pci->init_state |= FC_PCI_INIT; + return ret; + +err_pci_iounmap: + pci_iounmap(fc_pci->pdev, fc_pci->io_mem); + pci_set_drvdata(fc_pci->pdev, NULL); +err_pci_release_regions: + pci_release_regions(fc_pci->pdev); +err_pci_disable_device: + pci_disable_device(fc_pci->pdev); + return ret; +} + +static void flexcop_pci_exit(struct flexcop_pci *fc_pci) +{ + if (fc_pci->init_state & FC_PCI_INIT) { + free_irq(fc_pci->pdev->irq, fc_pci); + pci_iounmap(fc_pci->pdev, fc_pci->io_mem); + pci_set_drvdata(fc_pci->pdev, NULL); + pci_release_regions(fc_pci->pdev); + pci_disable_device(fc_pci->pdev); + } + fc_pci->init_state &= ~FC_PCI_INIT; +} + +static int flexcop_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct flexcop_device *fc; + struct flexcop_pci *fc_pci; + int ret = -ENOMEM; + + if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) { + err("out of memory\n"); + return -ENOMEM; + } + + /* general flexcop init */ + fc_pci = fc->bus_specific; + fc_pci->fc_dev = fc; + + fc->read_ibi_reg = flexcop_pci_read_ibi_reg; + fc->write_ibi_reg = flexcop_pci_write_ibi_reg; + fc->i2c_request = flexcop_i2c_request; + fc->get_mac_addr = flexcop_eeprom_check_mac_addr; + fc->stream_control = flexcop_pci_stream_control; + + if (enable_pid_filtering) + info("will use the HW PID filter."); + else + info("will pass the complete TS to the demuxer."); + + fc->pid_filtering = enable_pid_filtering; + fc->bus_type = FC_PCI; + fc->dev = &pdev->dev; + fc->owner = THIS_MODULE; + + /* bus specific part */ + fc_pci->pdev = pdev; + if ((ret = flexcop_pci_init(fc_pci)) != 0) + goto err_kfree; + + /* init flexcop */ + if ((ret = flexcop_device_initialize(fc)) != 0) + goto err_pci_exit; + + /* init dma */ + if ((ret = flexcop_pci_dma_init(fc_pci)) != 0) + goto err_fc_exit; + + INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work); + + if (irq_chk_intv > 0) + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? + 100 : + irq_chk_intv)); + return ret; + +err_fc_exit: + flexcop_device_exit(fc); +err_pci_exit: + flexcop_pci_exit(fc_pci); +err_kfree: + flexcop_device_kfree(fc); + return ret; +} + +/* in theory every _exit function should be called exactly two times, + * here and in the bail-out-part of the _init-function + */ +static void flexcop_pci_remove(struct pci_dev *pdev) +{ + struct flexcop_pci *fc_pci = pci_get_drvdata(pdev); + + if (irq_chk_intv > 0) + cancel_delayed_work(&fc_pci->irq_check_work); + + flexcop_pci_dma_exit(fc_pci); + flexcop_device_exit(fc_pci->fc_dev); + flexcop_pci_exit(fc_pci); + flexcop_device_kfree(fc_pci->fc_dev); +} + +static struct pci_device_id flexcop_pci_tbl[] = { + { PCI_DEVICE(0x13d0, 0x2103) }, + { }, +}; + +MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl); + +static struct pci_driver flexcop_pci_driver = { + .name = "b2c2_flexcop_pci", + .id_table = flexcop_pci_tbl, + .probe = flexcop_pci_probe, + .remove = flexcop_pci_remove, +}; + +static int __init flexcop_pci_module_init(void) +{ + return pci_register_driver(&flexcop_pci_driver); +} + +static void __exit flexcop_pci_module_exit(void) +{ + pci_unregister_driver(&flexcop_pci_driver); +} + +module_init(flexcop_pci_module_init); +module_exit(flexcop_pci_module_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig new file mode 100644 index 00000000..61d09e01 --- /dev/null +++ b/drivers/media/pci/bt8xx/Kconfig @@ -0,0 +1,43 @@ +config VIDEO_BT848 + tristate "BT848 Video For Linux" + depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 + select I2C_ALGOBIT + select VIDEO_BTCX + select VIDEOBUF_DMA_SG + depends on RC_CORE + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TVAUDIO if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TDA7432 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + Support for BT848 based frame grabber/overlay boards. This includes + the Miro, Hauppauge and STB boards. Please read the material in + for more information. + + To compile this driver as a module, choose M here: the + module will be called bttv. + +config DVB_BT8XX + tristate "DVB/ATSC Support for bt878 based TV cards" + depends on DVB_CORE && PCI && I2C && VIDEO_BT848 + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SP887X if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24110 if MEDIA_SUBDRV_AUTOSELECT + select DVB_OR51211 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + help + Support for PCI cards based on the Bt8xx PCI bridge. Examples are + the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, + the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and + some AVerMedia cards. + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y if you own such a device and want to use it. diff --git a/drivers/media/pci/bt8xx/Makefile b/drivers/media/pci/bt8xx/Makefile new file mode 100644 index 00000000..f9fe7c4e --- /dev/null +++ b/drivers/media/pci/bt8xx/Makefile @@ -0,0 +1,12 @@ +bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \ + bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \ + bttv-input.o bttv-audio-hook.o + +obj-$(CONFIG_VIDEO_BT848) += bttv.o +obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o + +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/common +ccflags-y += -Idrivers/media/tuners diff --git a/drivers/media/pci/bt8xx/bt848.h b/drivers/media/pci/bt8xx/bt848.h new file mode 100644 index 00000000..c37e6acf --- /dev/null +++ b/drivers/media/pci/bt8xx/bt848.h @@ -0,0 +1,369 @@ +/* + bt848.h - Bt848 register offsets + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _BT848_H_ +#define _BT848_H_ + +#ifndef PCI_VENDOR_ID_BROOKTREE +#define PCI_VENDOR_ID_BROOKTREE 0x109e +#endif +#ifndef PCI_DEVICE_ID_BT848 +#define PCI_DEVICE_ID_BT848 0x350 +#endif +#ifndef PCI_DEVICE_ID_BT849 +#define PCI_DEVICE_ID_BT849 0x351 +#endif +#ifndef PCI_DEVICE_ID_FUSION879 +#define PCI_DEVICE_ID_FUSION879 0x36c +#endif + +#ifndef PCI_DEVICE_ID_BT878 +#define PCI_DEVICE_ID_BT878 0x36e +#endif +#ifndef PCI_DEVICE_ID_BT879 +#define PCI_DEVICE_ID_BT879 0x36f +#endif + +/* Brooktree 848 registers */ + +#define BT848_DSTATUS 0x000 +#define BT848_DSTATUS_PRES (1<<7) +#define BT848_DSTATUS_HLOC (1<<6) +#define BT848_DSTATUS_FIELD (1<<5) +#define BT848_DSTATUS_NUML (1<<4) +#define BT848_DSTATUS_CSEL (1<<3) +#define BT848_DSTATUS_PLOCK (1<<2) +#define BT848_DSTATUS_LOF (1<<1) +#define BT848_DSTATUS_COF (1<<0) + +#define BT848_IFORM 0x004 +#define BT848_IFORM_HACTIVE (1<<7) +#define BT848_IFORM_MUXSEL (3<<5) +#define BT848_IFORM_MUX0 (2<<5) +#define BT848_IFORM_MUX1 (3<<5) +#define BT848_IFORM_MUX2 (1<<5) +#define BT848_IFORM_XTSEL (3<<3) +#define BT848_IFORM_XT0 (1<<3) +#define BT848_IFORM_XT1 (2<<3) +#define BT848_IFORM_XTAUTO (3<<3) +#define BT848_IFORM_XTBOTH (3<<3) +#define BT848_IFORM_NTSC 1 +#define BT848_IFORM_NTSC_J 2 +#define BT848_IFORM_PAL_BDGHI 3 +#define BT848_IFORM_PAL_M 4 +#define BT848_IFORM_PAL_N 5 +#define BT848_IFORM_SECAM 6 +#define BT848_IFORM_PAL_NC 7 +#define BT848_IFORM_AUTO 0 +#define BT848_IFORM_NORM 7 + +#define BT848_TDEC 0x008 +#define BT848_TDEC_DEC_FIELD (1<<7) +#define BT848_TDEC_FLDALIGN (1<<6) +#define BT848_TDEC_DEC_RAT (0x1f) + +#define BT848_E_CROP 0x00C +#define BT848_O_CROP 0x08C + +#define BT848_E_VDELAY_LO 0x010 +#define BT848_O_VDELAY_LO 0x090 + +#define BT848_E_VACTIVE_LO 0x014 +#define BT848_O_VACTIVE_LO 0x094 + +#define BT848_E_HDELAY_LO 0x018 +#define BT848_O_HDELAY_LO 0x098 + +#define BT848_E_HACTIVE_LO 0x01C +#define BT848_O_HACTIVE_LO 0x09C + +#define BT848_E_HSCALE_HI 0x020 +#define BT848_O_HSCALE_HI 0x0A0 + +#define BT848_E_HSCALE_LO 0x024 +#define BT848_O_HSCALE_LO 0x0A4 + +#define BT848_BRIGHT 0x028 + +#define BT848_E_CONTROL 0x02C +#define BT848_O_CONTROL 0x0AC +#define BT848_CONTROL_LNOTCH (1<<7) +#define BT848_CONTROL_COMP (1<<6) +#define BT848_CONTROL_LDEC (1<<5) +#define BT848_CONTROL_CBSENSE (1<<4) +#define BT848_CONTROL_CON_MSB (1<<2) +#define BT848_CONTROL_SAT_U_MSB (1<<1) +#define BT848_CONTROL_SAT_V_MSB (1<<0) + +#define BT848_CONTRAST_LO 0x030 +#define BT848_SAT_U_LO 0x034 +#define BT848_SAT_V_LO 0x038 +#define BT848_HUE 0x03C + +#define BT848_E_SCLOOP 0x040 +#define BT848_O_SCLOOP 0x0C0 +#define BT848_SCLOOP_CAGC (1<<6) +#define BT848_SCLOOP_CKILL (1<<5) +#define BT848_SCLOOP_HFILT_AUTO (0<<3) +#define BT848_SCLOOP_HFILT_CIF (1<<3) +#define BT848_SCLOOP_HFILT_QCIF (2<<3) +#define BT848_SCLOOP_HFILT_ICON (3<<3) + +#define BT848_SCLOOP_PEAK (1<<7) +#define BT848_SCLOOP_HFILT_MINP (1<<3) +#define BT848_SCLOOP_HFILT_MEDP (2<<3) +#define BT848_SCLOOP_HFILT_MAXP (3<<3) + + +#define BT848_OFORM 0x048 +#define BT848_OFORM_RANGE (1<<7) +#define BT848_OFORM_CORE0 (0<<5) +#define BT848_OFORM_CORE8 (1<<5) +#define BT848_OFORM_CORE16 (2<<5) +#define BT848_OFORM_CORE32 (3<<5) + +#define BT848_E_VSCALE_HI 0x04C +#define BT848_O_VSCALE_HI 0x0CC +#define BT848_VSCALE_YCOMB (1<<7) +#define BT848_VSCALE_COMB (1<<6) +#define BT848_VSCALE_INT (1<<5) +#define BT848_VSCALE_HI 15 + +#define BT848_E_VSCALE_LO 0x050 +#define BT848_O_VSCALE_LO 0x0D0 +#define BT848_TEST 0x054 +#define BT848_ADELAY 0x060 +#define BT848_BDELAY 0x064 + +#define BT848_ADC 0x068 +#define BT848_ADC_RESERVED (2<<6) +#define BT848_ADC_SYNC_T (1<<5) +#define BT848_ADC_AGC_EN (1<<4) +#define BT848_ADC_CLK_SLEEP (1<<3) +#define BT848_ADC_Y_SLEEP (1<<2) +#define BT848_ADC_C_SLEEP (1<<1) +#define BT848_ADC_CRUSH (1<<0) + +#define BT848_WC_UP 0x044 +#define BT848_WC_DOWN 0x078 + +#define BT848_E_VTC 0x06C +#define BT848_O_VTC 0x0EC +#define BT848_VTC_HSFMT (1<<7) +#define BT848_VTC_VFILT_2TAP 0 +#define BT848_VTC_VFILT_3TAP 1 +#define BT848_VTC_VFILT_4TAP 2 +#define BT848_VTC_VFILT_5TAP 3 + +#define BT848_SRESET 0x07C + +#define BT848_COLOR_FMT 0x0D4 +#define BT848_COLOR_FMT_O_RGB32 (0<<4) +#define BT848_COLOR_FMT_O_RGB24 (1<<4) +#define BT848_COLOR_FMT_O_RGB16 (2<<4) +#define BT848_COLOR_FMT_O_RGB15 (3<<4) +#define BT848_COLOR_FMT_O_YUY2 (4<<4) +#define BT848_COLOR_FMT_O_BtYUV (5<<4) +#define BT848_COLOR_FMT_O_Y8 (6<<4) +#define BT848_COLOR_FMT_O_RGB8 (7<<4) +#define BT848_COLOR_FMT_O_YCrCb422 (8<<4) +#define BT848_COLOR_FMT_O_YCrCb411 (9<<4) +#define BT848_COLOR_FMT_O_RAW (14<<4) +#define BT848_COLOR_FMT_E_RGB32 0 +#define BT848_COLOR_FMT_E_RGB24 1 +#define BT848_COLOR_FMT_E_RGB16 2 +#define BT848_COLOR_FMT_E_RGB15 3 +#define BT848_COLOR_FMT_E_YUY2 4 +#define BT848_COLOR_FMT_E_BtYUV 5 +#define BT848_COLOR_FMT_E_Y8 6 +#define BT848_COLOR_FMT_E_RGB8 7 +#define BT848_COLOR_FMT_E_YCrCb422 8 +#define BT848_COLOR_FMT_E_YCrCb411 9 +#define BT848_COLOR_FMT_E_RAW 14 + +#define BT848_COLOR_FMT_RGB32 0x00 +#define BT848_COLOR_FMT_RGB24 0x11 +#define BT848_COLOR_FMT_RGB16 0x22 +#define BT848_COLOR_FMT_RGB15 0x33 +#define BT848_COLOR_FMT_YUY2 0x44 +#define BT848_COLOR_FMT_BtYUV 0x55 +#define BT848_COLOR_FMT_Y8 0x66 +#define BT848_COLOR_FMT_RGB8 0x77 +#define BT848_COLOR_FMT_YCrCb422 0x88 +#define BT848_COLOR_FMT_YCrCb411 0x99 +#define BT848_COLOR_FMT_RAW 0xee + +#define BT848_VTOTAL_LO 0xB0 +#define BT848_VTOTAL_HI 0xB4 + +#define BT848_COLOR_CTL 0x0D8 +#define BT848_COLOR_CTL_EXT_FRMRATE (1<<7) +#define BT848_COLOR_CTL_COLOR_BARS (1<<6) +#define BT848_COLOR_CTL_RGB_DED (1<<5) +#define BT848_COLOR_CTL_GAMMA (1<<4) +#define BT848_COLOR_CTL_WSWAP_ODD (1<<3) +#define BT848_COLOR_CTL_WSWAP_EVEN (1<<2) +#define BT848_COLOR_CTL_BSWAP_ODD (1<<1) +#define BT848_COLOR_CTL_BSWAP_EVEN (1<<0) + +#define BT848_CAP_CTL 0x0DC +#define BT848_CAP_CTL_DITH_FRAME (1<<4) +#define BT848_CAP_CTL_CAPTURE_VBI_ODD (1<<3) +#define BT848_CAP_CTL_CAPTURE_VBI_EVEN (1<<2) +#define BT848_CAP_CTL_CAPTURE_ODD (1<<1) +#define BT848_CAP_CTL_CAPTURE_EVEN (1<<0) + +#define BT848_VBI_PACK_SIZE 0x0E0 + +#define BT848_VBI_PACK_DEL 0x0E4 +#define BT848_VBI_PACK_DEL_VBI_HDELAY 0xfc +#define BT848_VBI_PACK_DEL_EXT_FRAME 2 +#define BT848_VBI_PACK_DEL_VBI_PKT_HI 1 + + +#define BT848_INT_STAT 0x100 +#define BT848_INT_MASK 0x104 + +#define BT848_INT_ETBF (1<<23) + +#define BT848_INT_RISCS (0xf<<28) +#define BT848_INT_RISC_EN (1<<27) +#define BT848_INT_RACK (1<<25) +#define BT848_INT_FIELD (1<<24) +#define BT848_INT_SCERR (1<<19) +#define BT848_INT_OCERR (1<<18) +#define BT848_INT_PABORT (1<<17) +#define BT848_INT_RIPERR (1<<16) +#define BT848_INT_PPERR (1<<15) +#define BT848_INT_FDSR (1<<14) +#define BT848_INT_FTRGT (1<<13) +#define BT848_INT_FBUS (1<<12) +#define BT848_INT_RISCI (1<<11) +#define BT848_INT_GPINT (1<<9) +#define BT848_INT_I2CDONE (1<<8) +#define BT848_INT_VPRES (1<<5) +#define BT848_INT_HLOCK (1<<4) +#define BT848_INT_OFLOW (1<<3) +#define BT848_INT_HSYNC (1<<2) +#define BT848_INT_VSYNC (1<<1) +#define BT848_INT_FMTCHG (1<<0) + + +#define BT848_GPIO_DMA_CTL 0x10C +#define BT848_GPIO_DMA_CTL_GPINTC (1<<15) +#define BT848_GPIO_DMA_CTL_GPINTI (1<<14) +#define BT848_GPIO_DMA_CTL_GPWEC (1<<13) +#define BT848_GPIO_DMA_CTL_GPIOMODE (3<<11) +#define BT848_GPIO_DMA_CTL_GPCLKMODE (1<<10) +#define BT848_GPIO_DMA_CTL_PLTP23_4 (0<<6) +#define BT848_GPIO_DMA_CTL_PLTP23_8 (1<<6) +#define BT848_GPIO_DMA_CTL_PLTP23_16 (2<<6) +#define BT848_GPIO_DMA_CTL_PLTP23_32 (3<<6) +#define BT848_GPIO_DMA_CTL_PLTP1_4 (0<<4) +#define BT848_GPIO_DMA_CTL_PLTP1_8 (1<<4) +#define BT848_GPIO_DMA_CTL_PLTP1_16 (2<<4) +#define BT848_GPIO_DMA_CTL_PLTP1_32 (3<<4) +#define BT848_GPIO_DMA_CTL_PKTP_4 (0<<2) +#define BT848_GPIO_DMA_CTL_PKTP_8 (1<<2) +#define BT848_GPIO_DMA_CTL_PKTP_16 (2<<2) +#define BT848_GPIO_DMA_CTL_PKTP_32 (3<<2) +#define BT848_GPIO_DMA_CTL_RISC_ENABLE (1<<1) +#define BT848_GPIO_DMA_CTL_FIFO_ENABLE (1<<0) + +#define BT848_I2C 0x110 +#define BT878_I2C_MODE (1<<7) +#define BT878_I2C_RATE (1<<6) +#define BT878_I2C_NOSTOP (1<<5) +#define BT878_I2C_NOSTART (1<<4) +#define BT848_I2C_DIV (0xf<<4) +#define BT848_I2C_SYNC (1<<3) +#define BT848_I2C_W3B (1<<2) +#define BT848_I2C_SCL (1<<1) +#define BT848_I2C_SDA (1<<0) + +#define BT848_RISC_STRT_ADD 0x114 +#define BT848_GPIO_OUT_EN 0x118 +#define BT848_GPIO_REG_INP 0x11C +#define BT848_RISC_COUNT 0x120 +#define BT848_GPIO_DATA 0x200 + + +/* Bt848 RISC commands */ + +/* only for the SYNC RISC command */ +#define BT848_FIFO_STATUS_FM1 0x06 +#define BT848_FIFO_STATUS_FM3 0x0e +#define BT848_FIFO_STATUS_SOL 0x02 +#define BT848_FIFO_STATUS_EOL4 0x01 +#define BT848_FIFO_STATUS_EOL3 0x0d +#define BT848_FIFO_STATUS_EOL2 0x09 +#define BT848_FIFO_STATUS_EOL1 0x05 +#define BT848_FIFO_STATUS_VRE 0x04 +#define BT848_FIFO_STATUS_VRO 0x0c +#define BT848_FIFO_STATUS_PXV 0x00 + +#define BT848_RISC_RESYNC (1<<15) + +/* WRITE and SKIP */ +/* disable which bytes of each DWORD */ +#define BT848_RISC_BYTE0 (1U<<12) +#define BT848_RISC_BYTE1 (1U<<13) +#define BT848_RISC_BYTE2 (1U<<14) +#define BT848_RISC_BYTE3 (1U<<15) +#define BT848_RISC_BYTE_ALL (0x0fU<<12) +#define BT848_RISC_BYTE_NONE 0 +/* cause RISCI */ +#define BT848_RISC_IRQ (1U<<24) +/* RISC command is last one in this line */ +#define BT848_RISC_EOL (1U<<26) +/* RISC command is first one in this line */ +#define BT848_RISC_SOL (1U<<27) + +#define BT848_RISC_WRITE (0x01U<<28) +#define BT848_RISC_SKIP (0x02U<<28) +#define BT848_RISC_WRITEC (0x05U<<28) +#define BT848_RISC_JUMP (0x07U<<28) +#define BT848_RISC_SYNC (0x08U<<28) + +#define BT848_RISC_WRITE123 (0x09U<<28) +#define BT848_RISC_SKIP123 (0x0aU<<28) +#define BT848_RISC_WRITE1S23 (0x0bU<<28) + + +/* Bt848A and higher only !! */ +#define BT848_TGLB 0x080 +#define BT848_TGCTRL 0x084 +#define BT848_FCAP 0x0E8 +#define BT848_PLL_F_LO 0x0F0 +#define BT848_PLL_F_HI 0x0F4 + +#define BT848_PLL_XCI 0x0F8 +#define BT848_PLL_X (1<<7) +#define BT848_PLL_C (1<<6) + +#define BT848_DVSIF 0x0FC + +/* Bt878 register */ + +#define BT878_DEVCTRL 0x40 +#define BT878_EN_TBFX 0x02 +#define BT878_EN_VSFX 0x04 + +#endif diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c new file mode 100644 index 00000000..66eb0baa --- /dev/null +++ b/drivers/media/pci/bt8xx/bt878.c @@ -0,0 +1,608 @@ +/* + * bt878.c: part of the driver for the Pinnacle PCTV Sat DVB PCI card + * + * Copyright (C) 2002 Peter Hettkamp + * + * large parts based on the bttv driver + * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@metzlerbros.de) + * & Marcus Metzler (mocm@metzlerbros.de) + * (c) 1999,2000 Gerd Knorr + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "bt878.h" +#include "dst_priv.h" + + +/**************************************/ +/* Miscellaneous utility definitions */ +/**************************************/ + +static unsigned int bt878_verbose = 1; +static unsigned int bt878_debug; + +module_param_named(verbose, bt878_verbose, int, 0444); +MODULE_PARM_DESC(verbose, + "verbose startup messages, default is 1 (yes)"); +module_param_named(debug, bt878_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off)."); + +int bt878_num; +struct bt878 bt878[BT878_MAX]; + +EXPORT_SYMBOL(bt878_num); +EXPORT_SYMBOL(bt878); + +#define btwrite(dat,adr) bmtwrite((dat), (bt->bt878_mem+(adr))) +#define btread(adr) bmtread(bt->bt878_mem+(adr)) + +#define btand(dat,adr) btwrite((dat) & btread(adr), adr) +#define btor(dat,adr) btwrite((dat) | btread(adr), adr) +#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) + +#if defined(dprintk) +#undef dprintk +#endif +#define dprintk(fmt, arg...) \ + do { \ + if (bt878_debug) \ + printk(KERN_DEBUG fmt, ##arg); \ + } while (0) + +static void bt878_mem_free(struct bt878 *bt) +{ + if (bt->buf_cpu) { + pci_free_consistent(bt->dev, bt->buf_size, bt->buf_cpu, + bt->buf_dma); + bt->buf_cpu = NULL; + } + + if (bt->risc_cpu) { + pci_free_consistent(bt->dev, bt->risc_size, bt->risc_cpu, + bt->risc_dma); + bt->risc_cpu = NULL; + } +} + +static int bt878_mem_alloc(struct bt878 *bt) +{ + if (!bt->buf_cpu) { + bt->buf_size = 128 * 1024; + + bt->buf_cpu = + pci_alloc_consistent(bt->dev, bt->buf_size, + &bt->buf_dma); + + if (!bt->buf_cpu) + return -ENOMEM; + + memset(bt->buf_cpu, 0, bt->buf_size); + } + + if (!bt->risc_cpu) { + bt->risc_size = PAGE_SIZE; + bt->risc_cpu = + pci_alloc_consistent(bt->dev, bt->risc_size, + &bt->risc_dma); + + if (!bt->risc_cpu) { + bt878_mem_free(bt); + return -ENOMEM; + } + + memset(bt->risc_cpu, 0, bt->risc_size); + } + + return 0; +} + +/* RISC instructions */ +#define RISC_WRITE (0x01 << 28) +#define RISC_JUMP (0x07 << 28) +#define RISC_SYNC (0x08 << 28) + +/* RISC bits */ +#define RISC_WR_SOL (1 << 27) +#define RISC_WR_EOL (1 << 26) +#define RISC_IRQ (1 << 24) +#define RISC_STATUS(status) ((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16)) +#define RISC_SYNC_RESYNC (1 << 15) +#define RISC_SYNC_FM1 0x06 +#define RISC_SYNC_VRO 0x0C + +#define RISC_FLUSH() bt->risc_pos = 0 +#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr) + +static int bt878_make_risc(struct bt878 *bt) +{ + bt->block_bytes = bt->buf_size >> 4; + bt->block_count = 1 << 4; + bt->line_bytes = bt->block_bytes; + bt->line_count = bt->block_count; + + while (bt->line_bytes > 4095) { + bt->line_bytes >>= 1; + bt->line_count <<= 1; + } + + if (bt->line_count > 255) { + printk(KERN_ERR "bt878: buffer size error!\n"); + return -EINVAL; + } + return 0; +} + + +static void bt878_risc_program(struct bt878 *bt, u32 op_sync_orin) +{ + u32 buf_pos = 0; + u32 line; + + RISC_FLUSH(); + RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin); + RISC_INSTR(0); + + dprintk("bt878: risc len lines %u, bytes per line %u\n", + bt->line_count, bt->line_bytes); + for (line = 0; line < bt->line_count; line++) { + // At the beginning of every block we issue an IRQ with previous (finished) block number set + if (!(buf_pos % bt->block_bytes)) + RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL | + RISC_IRQ | + RISC_STATUS(((buf_pos / + bt->block_bytes) + + (bt->block_count - + 1)) % + bt->block_count) | bt-> + line_bytes); + else + RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL | + bt->line_bytes); + RISC_INSTR(bt->buf_dma + buf_pos); + buf_pos += bt->line_bytes; + } + + RISC_INSTR(RISC_SYNC | op_sync_orin | RISC_SYNC_VRO); + RISC_INSTR(0); + + RISC_INSTR(RISC_JUMP); + RISC_INSTR(bt->risc_dma); + + btwrite((bt->line_count << 16) | bt->line_bytes, BT878_APACK_LEN); +} + +/*****************************/ +/* Start/Stop grabbing funcs */ +/*****************************/ + +void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin, + u32 irq_err_ignore) +{ + u32 int_mask; + + dprintk("bt878 debug: bt878_start (ctl=%8.8x)\n", controlreg); + /* complete the writing of the risc dma program now we have + * the card specifics + */ + bt878_risc_program(bt, op_sync_orin); + controlreg &= ~0x1f; + controlreg |= 0x1b; + + btwrite(bt->risc_dma, BT878_ARISC_START); + + /* original int mask had : + * 6 2 8 4 0 + * 1111 1111 1000 0000 0000 + * SCERR|OCERR|PABORT|RIPERR|FDSR|FTRGT|FBUS|RISCI + * Hacked for DST to: + * SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI + */ + int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT | + BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT | + BT878_AFBUS | BT878_ARISCI; + + + /* ignore pesky bits */ + int_mask &= ~irq_err_ignore; + + btwrite(int_mask, BT878_AINT_MASK); + btwrite(controlreg, BT878_AGPIO_DMA_CTL); +} + +void bt878_stop(struct bt878 *bt) +{ + u32 stat; + int i = 0; + + dprintk("bt878 debug: bt878_stop\n"); + + btwrite(0, BT878_AINT_MASK); + btand(~0x13, BT878_AGPIO_DMA_CTL); + + do { + stat = btread(BT878_AINT_STAT); + if (!(stat & BT878_ARISC_EN)) + break; + i++; + } while (i < 500); + + dprintk("bt878(%d) debug: bt878_stop, i=%d, stat=0x%8.8x\n", + bt->nr, i, stat); +} + +EXPORT_SYMBOL(bt878_start); +EXPORT_SYMBOL(bt878_stop); + +/*****************************/ +/* Interrupt service routine */ +/*****************************/ + +static irqreturn_t bt878_irq(int irq, void *dev_id) +{ + u32 stat, astat, mask; + int count; + struct bt878 *bt; + + bt = (struct bt878 *) dev_id; + + count = 0; + while (1) { + stat = btread(BT878_AINT_STAT); + mask = btread(BT878_AINT_MASK); + if (!(astat = (stat & mask))) + return IRQ_NONE; /* this interrupt is not for me */ +/* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */ + btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */ + + + if (astat & (BT878_ASCERR | BT878_AOCERR)) { + if (bt878_verbose) { + printk(KERN_INFO + "bt878(%d): irq%s%s risc_pc=%08x\n", + bt->nr, + (astat & BT878_ASCERR) ? " SCERR" : + "", + (astat & BT878_AOCERR) ? " OCERR" : + "", btread(BT878_ARISC_PC)); + } + } + if (astat & (BT878_APABORT | BT878_ARIPERR | BT878_APPERR)) { + if (bt878_verbose) { + printk(KERN_INFO + "bt878(%d): irq%s%s%s risc_pc=%08x\n", + bt->nr, + (astat & BT878_APABORT) ? " PABORT" : + "", + (astat & BT878_ARIPERR) ? " RIPERR" : + "", + (astat & BT878_APPERR) ? " PPERR" : + "", btread(BT878_ARISC_PC)); + } + } + if (astat & (BT878_AFDSR | BT878_AFTRGT | BT878_AFBUS)) { + if (bt878_verbose) { + printk(KERN_INFO + "bt878(%d): irq%s%s%s risc_pc=%08x\n", + bt->nr, + (astat & BT878_AFDSR) ? " FDSR" : "", + (astat & BT878_AFTRGT) ? " FTRGT" : + "", + (astat & BT878_AFBUS) ? " FBUS" : "", + btread(BT878_ARISC_PC)); + } + } + if (astat & BT878_ARISCI) { + bt->finished_block = (stat & BT878_ARISCS) >> 28; + tasklet_schedule(&bt->tasklet); + break; + } + count++; + if (count > 20) { + btwrite(0, BT878_AINT_MASK); + printk(KERN_ERR + "bt878(%d): IRQ lockup, cleared int mask\n", + bt->nr); + break; + } + } + return IRQ_HANDLED; +} + +int +bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp) +{ + int retval; + + retval = 0; + if (mutex_lock_interruptible(&bt->gpio_lock)) + return -ERESTARTSYS; + /* special gpio signal */ + switch (cmd) { + case DST_IG_ENABLE: + // dprintk("dvb_bt8xx: dst enable mask 0x%02x enb 0x%02x \n", mp->dstg.enb.mask, mp->dstg.enb.enable); + retval = bttv_gpio_enable(bt->bttv_nr, + mp->enb.mask, + mp->enb.enable); + break; + case DST_IG_WRITE: + // dprintk("dvb_bt8xx: dst write gpio mask 0x%02x out 0x%02x\n", mp->dstg.outp.mask, mp->dstg.outp.highvals); + retval = bttv_write_gpio(bt->bttv_nr, + mp->outp.mask, + mp->outp.highvals); + + break; + case DST_IG_READ: + /* read */ + retval = bttv_read_gpio(bt->bttv_nr, &mp->rd.value); + // dprintk("dvb_bt8xx: dst read gpio 0x%02x\n", (unsigned)mp->dstg.rd.value); + break; + case DST_IG_TS: + /* Set packet size */ + bt->TS_Size = mp->psize; + break; + + default: + retval = -EINVAL; + break; + } + mutex_unlock(&bt->gpio_lock); + return retval; +} + +EXPORT_SYMBOL(bt878_device_control); + +#define BROOKTREE_878_DEVICE(vend, dev, name) \ + { \ + .vendor = PCI_VENDOR_ID_BROOKTREE, \ + .device = PCI_DEVICE_ID_BROOKTREE_878, \ + .subvendor = (vend), .subdevice = (dev), \ + .driver_data = (unsigned long) name \ + } + +static struct pci_device_id bt878_pci_tbl[] = { + BROOKTREE_878_DEVICE(0x0071, 0x0101, "Nebula Electronics DigiTV"), + BROOKTREE_878_DEVICE(0x1461, 0x0761, "AverMedia AverTV DVB-T 761"), + BROOKTREE_878_DEVICE(0x11bd, 0x001c, "Pinnacle PCTV Sat"), + BROOKTREE_878_DEVICE(0x11bd, 0x0026, "Pinnacle PCTV SAT CI"), + BROOKTREE_878_DEVICE(0x1822, 0x0001, "Twinhan VisionPlus DVB"), + BROOKTREE_878_DEVICE(0x270f, 0xfc00, + "ChainTech digitop DST-1000 DVB-S"), + BROOKTREE_878_DEVICE(0x1461, 0x0771, "AVermedia AverTV DVB-T 771"), + BROOKTREE_878_DEVICE(0x18ac, 0xdb10, "DViCO FusionHDTV DVB-T Lite"), + BROOKTREE_878_DEVICE(0x18ac, 0xdb11, "Ultraview DVB-T Lite"), + BROOKTREE_878_DEVICE(0x18ac, 0xd500, "DViCO FusionHDTV 5 Lite"), + BROOKTREE_878_DEVICE(0x7063, 0x2000, "pcHDTV HD-2000 TV"), + BROOKTREE_878_DEVICE(0x1822, 0x0026, "DNTV Live! Mini"), + { } +}; + +MODULE_DEVICE_TABLE(pci, bt878_pci_tbl); + +static const char * card_name(const struct pci_device_id *id) +{ + return id->driver_data ? (const char *)id->driver_data : "Unknown"; +} + +/***********************/ +/* PCI device handling */ +/***********************/ + +static int bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) +{ + int result = 0; + unsigned char lat; + struct bt878 *bt; +#if defined(__powerpc__) + unsigned int cmd; +#endif + unsigned int cardid; + + printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n", + bt878_num); + if (bt878_num >= BT878_MAX) { + printk(KERN_ERR "bt878: Too many devices inserted\n"); + result = -ENOMEM; + goto fail0; + } + if (pci_enable_device(dev)) + return -EIO; + + cardid = dev->subsystem_device << 16; + cardid |= dev->subsystem_vendor; + + printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n", + __func__, cardid, card_name(pci_id)); + + bt = &bt878[bt878_num]; + bt->dev = dev; + bt->nr = bt878_num; + bt->shutdown = 0; + + bt->id = dev->device; + bt->irq = dev->irq; + bt->bt878_adr = pci_resource_start(dev, 0); + if (!request_mem_region(pci_resource_start(dev, 0), + pci_resource_len(dev, 0), "bt878")) { + result = -EBUSY; + goto fail0; + } + + bt->revision = dev->revision; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + + + printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ", + bt878_num, bt->id, bt->revision, dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + printk("irq: %d, latency: %d, memory: 0x%lx\n", + bt->irq, lat, bt->bt878_adr); + + +#if defined(__powerpc__) + /* on OpenFirmware machines (PowerMac at least), PCI memory cycle */ + /* response on cards with no firmware is not enabled by OF */ + pci_read_config_dword(dev, PCI_COMMAND, &cmd); + cmd = (cmd | PCI_COMMAND_MEMORY); + pci_write_config_dword(dev, PCI_COMMAND, cmd); +#endif + +#ifdef __sparc__ + bt->bt878_mem = (unsigned char *) bt->bt878_adr; +#else + bt->bt878_mem = ioremap(bt->bt878_adr, 0x1000); +#endif + + /* clear interrupt mask */ + btwrite(0, BT848_INT_MASK); + + result = request_irq(bt->irq, bt878_irq, + IRQF_SHARED | IRQF_DISABLED, "bt878", + (void *) bt); + if (result == -EINVAL) { + printk(KERN_ERR "bt878(%d): Bad irq number or handler\n", + bt878_num); + goto fail1; + } + if (result == -EBUSY) { + printk(KERN_ERR + "bt878(%d): IRQ %d busy, change your PnP config in BIOS\n", + bt878_num, bt->irq); + goto fail1; + } + if (result < 0) + goto fail1; + + pci_set_master(dev); + pci_set_drvdata(dev, bt); + + if ((result = bt878_mem_alloc(bt))) { + printk(KERN_ERR "bt878: failed to allocate memory!\n"); + goto fail2; + } + + bt878_make_risc(bt); + btwrite(0, BT878_AINT_MASK); + bt878_num++; + + return 0; + + fail2: + free_irq(bt->irq, bt); + fail1: + release_mem_region(pci_resource_start(bt->dev, 0), + pci_resource_len(bt->dev, 0)); + fail0: + pci_disable_device(dev); + return result; +} + +static void bt878_remove(struct pci_dev *pci_dev) +{ + u8 command; + struct bt878 *bt = pci_get_drvdata(pci_dev); + + if (bt878_verbose) + printk(KERN_INFO "bt878(%d): unloading\n", bt->nr); + + /* turn off all capturing, DMA and IRQs */ + btand(~0x13, BT878_AGPIO_DMA_CTL); + + /* first disable interrupts before unmapping the memory! */ + btwrite(0, BT878_AINT_MASK); + btwrite(~0U, BT878_AINT_STAT); + + /* disable PCI bus-mastering */ + pci_read_config_byte(bt->dev, PCI_COMMAND, &command); + /* Should this be &=~ ?? */ + command &= ~PCI_COMMAND_MASTER; + pci_write_config_byte(bt->dev, PCI_COMMAND, command); + + free_irq(bt->irq, bt); + printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem); + if (bt->bt878_mem) + iounmap(bt->bt878_mem); + + release_mem_region(pci_resource_start(bt->dev, 0), + pci_resource_len(bt->dev, 0)); + /* wake up any waiting processes + because shutdown flag is set, no new processes (in this queue) + are expected + */ + bt->shutdown = 1; + bt878_mem_free(bt); + + pci_set_drvdata(pci_dev, NULL); + pci_disable_device(pci_dev); + return; +} + +static struct pci_driver bt878_pci_driver = { + .name = "bt878", + .id_table = bt878_pci_tbl, + .probe = bt878_probe, + .remove = bt878_remove, +}; + +/*******************************/ +/* Module management functions */ +/*******************************/ + +static int __init bt878_init_module(void) +{ + bt878_num = 0; + + printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n", + (BT878_VERSION_CODE >> 16) & 0xff, + (BT878_VERSION_CODE >> 8) & 0xff, + BT878_VERSION_CODE & 0xff); + + return pci_register_driver(&bt878_pci_driver); +} + +static void __exit bt878_cleanup_module(void) +{ + pci_unregister_driver(&bt878_pci_driver); +} + +module_init(bt878_init_module); +module_exit(bt878_cleanup_module); + +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/bt878.h b/drivers/media/pci/bt8xx/bt878.h new file mode 100644 index 00000000..d19b5929 --- /dev/null +++ b/drivers/media/pci/bt8xx/bt878.h @@ -0,0 +1,159 @@ +/* + bt878.h - Bt878 audio module (register offsets) + + Copyright (C) 2002 Peter Hettkamp + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _BT878_H_ +#define _BT878_H_ + +#include +#include +#include +#include +#include + +#include "bt848.h" +#include "bttv.h" + +#define BT878_VERSION_CODE 0x000000 + +#define BT878_AINT_STAT 0x100 +#define BT878_ARISCS (0xf<<28) +#define BT878_ARISC_EN (1<<27) +#define BT878_ASCERR (1<<19) +#define BT878_AOCERR (1<<18) +#define BT878_APABORT (1<<17) +#define BT878_ARIPERR (1<<16) +#define BT878_APPERR (1<<15) +#define BT878_AFDSR (1<<14) +#define BT878_AFTRGT (1<<13) +#define BT878_AFBUS (1<<12) +#define BT878_ARISCI (1<<11) +#define BT878_AOFLOW (1<<3) + +#define BT878_AINT_MASK 0x104 + +#define BT878_AGPIO_DMA_CTL 0x10c +#define BT878_A_GAIN (0xf<<28) +#define BT878_A_G2X (1<<27) +#define BT878_A_PWRDN (1<<26) +#define BT878_A_SEL (3<<24) +#define BT878_DA_SCE (1<<23) +#define BT878_DA_LRI (1<<22) +#define BT878_DA_MLB (1<<21) +#define BT878_DA_LRD (0x1f<<16) +#define BT878_DA_DPM (1<<15) +#define BT878_DA_SBR (1<<14) +#define BT878_DA_ES2 (1<<13) +#define BT878_DA_LMT (1<<12) +#define BT878_DA_SDR (0xf<<8) +#define BT878_DA_IOM (3<<6) +#define BT878_DA_APP (1<<5) +#define BT878_ACAP_EN (1<<4) +#define BT878_PKTP (3<<2) +#define BT878_RISC_EN (1<<1) +#define BT878_FIFO_EN 1 + +#define BT878_APACK_LEN 0x110 +#define BT878_AFP_LEN (0xff<<16) +#define BT878_ALP_LEN 0xfff + +#define BT878_ARISC_START 0x114 + +#define BT878_ARISC_PC 0x120 + +/* BT878 FUNCTION 0 REGISTERS */ +#define BT878_GPIO_DMA_CTL 0x10c + +/* Interrupt register */ +#define BT878_INT_STAT 0x100 +#define BT878_INT_MASK 0x104 +#define BT878_I2CRACK (1<<25) +#define BT878_I2CDONE (1<<8) + +#define BT878_MAX 4 + +#define BT878_RISC_SYNC_MASK (1 << 15) + + +#define BTTV_BOARD_UNKNOWN 0x00 +#define BTTV_BOARD_PINNACLESAT 0x5e +#define BTTV_BOARD_NEBULA_DIGITV 0x68 +#define BTTV_BOARD_PC_HDTV 0x70 +#define BTTV_BOARD_TWINHAN_DST 0x71 +#define BTTV_BOARD_AVDVBT_771 0x7b +#define BTTV_BOARD_AVDVBT_761 0x7c +#define BTTV_BOARD_DVICO_DVBT_LITE 0x80 +#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87 + +extern int bt878_num; + +struct bt878 { + struct mutex gpio_lock; + unsigned int nr; + unsigned int bttv_nr; + struct i2c_adapter *adapter; + struct pci_dev *dev; + unsigned int id; + unsigned int TS_Size; + unsigned char revision; + unsigned int irq; + unsigned long bt878_adr; + volatile void __iomem *bt878_mem; /* function 1 */ + + volatile u32 finished_block; + volatile u32 last_block; + u32 block_count; + u32 block_bytes; + u32 line_bytes; + u32 line_count; + + u32 buf_size; + u8 *buf_cpu; + dma_addr_t buf_dma; + + u32 risc_size; + __le32 *risc_cpu; + dma_addr_t risc_dma; + u32 risc_pos; + + struct tasklet_struct tasklet; + int shutdown; +}; + +extern struct bt878 bt878[BT878_MAX]; + +void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin, + u32 irq_err_ignore); +void bt878_stop(struct bt878 *bt); + +#if defined(__powerpc__) /* big-endian */ +static inline void io_st_le32(volatile unsigned __iomem *addr, unsigned val) +{ + st_le32(addr, val); + eieio(); +} + +#define bmtwrite(dat,adr) io_st_le32((adr),(dat)) +#define bmtread(adr) ld_le32((adr)) +#else +#define bmtwrite(dat,adr) writel((dat), (adr)) +#define bmtread(adr) readl(adr) +#endif + +#endif diff --git a/drivers/media/pci/bt8xx/bttv-audio-hook.c b/drivers/media/pci/bt8xx/bttv-audio-hook.c new file mode 100644 index 00000000..2364d165 --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-audio-hook.c @@ -0,0 +1,382 @@ +/* + * Handlers for board audio hooks, splitted from bttv-cards + * + * Copyright (c) 2006 Mauro Carvalho Chehab (mchehab@infradead.org) + * This code is placed under the terms of the GNU General Public License + */ + +#include "bttv-audio-hook.h" + +#include + +/* ----------------------------------------------------------------------- */ +/* winview */ + +void winview_volume(struct bttv *btv, __u16 volume) +{ + /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */ + int bits_out, loops, vol, data; + + /* 32 levels logarithmic */ + vol = 32 - ((volume>>11)); + /* units */ + bits_out = (PT2254_DBS_IN_2>>(vol%5)); + /* tens */ + bits_out |= (PT2254_DBS_IN_10>>(vol/5)); + bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL; + data = gpio_read(); + data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA| + WINVIEW_PT2254_STROBE); + for (loops = 17; loops >= 0 ; loops--) { + if (bits_out & (1<audmode & V4L2_TUNER_MODE_LANG1) + con = 0x000; + if (t->audmode & V4L2_TUNER_MODE_LANG2) + con = 0x300; + if (t->audmode & V4L2_TUNER_MODE_STEREO) + con = 0x200; +/* if (t->audmode & V4L2_TUNER_MODE_MONO) + * con = 0x100; */ + gpio_bits(0x300, con); + } else { + t->audmode = V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + } +} + +void gvbctv5pci_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + unsigned int val, con; + + if (btv->radio_user) + return; + + val = gpio_read(); + if (set) { + con = 0x000; + if (t->audmode & V4L2_TUNER_MODE_LANG2) { + if (t->audmode & V4L2_TUNER_MODE_LANG1) { + /* LANG1 + LANG2 */ + con = 0x100; + } + else { + /* LANG2 */ + con = 0x300; + } + } + if (con != (val & 0x300)) { + gpio_bits(0x300, con); + if (bttv_gpio) + bttv_gpio_tracking(btv,"gvbctv5pci"); + } + } else { + switch (val & 0x70) { + case 0x10: + t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + break; + case 0x30: + t->rxsubchans = V4L2_TUNER_SUB_LANG2; + break; + case 0x50: + t->rxsubchans = V4L2_TUNER_SUB_LANG1; + break; + case 0x60: + t->rxsubchans = V4L2_TUNER_SUB_STEREO; + break; + case 0x70: + t->rxsubchans = V4L2_TUNER_SUB_MONO; + break; + default: + t->rxsubchans = V4L2_TUNER_SUB_MONO | + V4L2_TUNER_SUB_STEREO | + V4L2_TUNER_SUB_LANG1 | + V4L2_TUNER_SUB_LANG2; + } + t->audmode = V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + } +} + +/* + * Mario Medina Nussbaum + * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo, + * 0xdde enables mono and 0xccd enables sap + * + * Petr Vandrovec + * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select + * input/output sound connection, so both must be set for output mode. + * + * Looks like it's needed only for the "tvphone", the "tvphone 98" + * handles this with a tda9840 + * + */ + +void avermedia_tvphone_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + int val = 0; + + if (set) { + if (t->audmode & V4L2_TUNER_MODE_LANG2) /* SAP */ + val = 0x02; + if (t->audmode & V4L2_TUNER_MODE_STEREO) + val = 0x01; + if (val) { + gpio_bits(0x03,val); + if (bttv_gpio) + bttv_gpio_tracking(btv,"avermedia"); + } + } else { + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1; + return; + } +} + + +void avermedia_tv_stereo_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + int val = 0; + + if (set) { + if (t->audmode & V4L2_TUNER_MODE_LANG2) /* SAP */ + val = 0x01; + if (t->audmode & V4L2_TUNER_MODE_STEREO) /* STEREO */ + val = 0x02; + btaor(val, ~0x03, BT848_GPIO_DATA); + if (bttv_gpio) + bttv_gpio_tracking(btv,"avermedia"); + } else { + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + return; + } +} + +/* Lifetec 9415 handling */ + +void lt9415_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + int val = 0; + + if (gpio_read() & 0x4000) { + t->audmode = V4L2_TUNER_MODE_MONO; + return; + } + + if (set) { + if (t->audmode & V4L2_TUNER_MODE_LANG2) /* A2 SAP */ + val = 0x0080; + if (t->audmode & V4L2_TUNER_MODE_STEREO) /* A2 stereo */ + val = 0x0880; + if ((t->audmode & V4L2_TUNER_MODE_LANG1) || + (t->audmode & V4L2_TUNER_MODE_MONO)) + val = 0; + gpio_bits(0x0880, val); + if (bttv_gpio) + bttv_gpio_tracking(btv,"lt9415"); + } else { + /* autodetect doesn't work with this card :-( */ + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + return; + } +} + +/* TDA9821 on TerraTV+ Bt848, Bt878 */ +void terratv_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + unsigned int con = 0; + + if (set) { + gpio_inout(0x180000,0x180000); + if (t->audmode & V4L2_TUNER_MODE_LANG2) + con = 0x080000; + if (t->audmode & V4L2_TUNER_MODE_STEREO) + con = 0x180000; + gpio_bits(0x180000, con); + if (bttv_gpio) + bttv_gpio_tracking(btv,"terratv"); + } else { + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + } +} + + +void winfast2000_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + unsigned long val = 0; + + if (set) { + /*btor (0xc32000, BT848_GPIO_OUT_EN);*/ + if (t->audmode & V4L2_TUNER_MODE_MONO) /* Mono */ + val = 0x420000; + if (t->audmode & V4L2_TUNER_MODE_LANG1) /* Mono */ + val = 0x420000; + if (t->audmode & V4L2_TUNER_MODE_LANG2) /* SAP */ + val = 0x410000; + if (t->audmode & V4L2_TUNER_MODE_STEREO) /* Stereo */ + val = 0x020000; + if (val) { + gpio_bits(0x430000, val); + if (bttv_gpio) + bttv_gpio_tracking(btv,"winfast2000"); + } + } else { + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + } +} + +/* + * Dariusz Kowalewski + * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM + * revision 9B has on-board TDA9874A sound decoder). + * + * Note: There are card variants without tda9874a. Forcing the "stereo sound route" + * will mute this cards. + */ +void pvbt878p9b_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + unsigned int val = 0; + + if (btv->radio_user) + return; + + if (set) { + if (t->audmode & V4L2_TUNER_MODE_MONO) { + val = 0x01; + } + if ((t->audmode & (V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2)) + || (t->audmode & V4L2_TUNER_MODE_STEREO)) { + val = 0x02; + } + if (val) { + gpio_bits(0x03,val); + if (bttv_gpio) + bttv_gpio_tracking(btv,"pvbt878p9b"); + } + } else { + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + } +} + +/* + * Dariusz Kowalewski + * sound control for FlyVideo 2000S (with tda9874 decoder) + * based on pvbt878p9b_audio() - this is not tested, please fix!!! + */ +void fv2000s_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + unsigned int val = 0xffff; + + if (btv->radio_user) + return; + + if (set) { + if (t->audmode & V4L2_TUNER_MODE_MONO) { + val = 0x0000; + } + if ((t->audmode & (V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2)) + || (t->audmode & V4L2_TUNER_MODE_STEREO)) { + val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */ + } + if (val != 0xffff) { + gpio_bits(0x1800, val); + if (bttv_gpio) + bttv_gpio_tracking(btv,"fv2000s"); + } + } else { + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + } +} + +/* + * sound control for Canopus WinDVR PCI + * Masaki Suzuki + */ +void windvr_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + unsigned long val = 0; + + if (set) { + if (t->audmode & V4L2_TUNER_MODE_MONO) + val = 0x040000; + if (t->audmode & V4L2_TUNER_MODE_LANG1) + val = 0; + if (t->audmode & V4L2_TUNER_MODE_LANG2) + val = 0x100000; + if (t->audmode & V4L2_TUNER_MODE_STEREO) + val = 0; + if (val) { + gpio_bits(0x140000, val); + if (bttv_gpio) + bttv_gpio_tracking(btv,"windvr"); + } + } else { + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + } +} + +/* + * sound control for AD-TVK503 + * Hiroshi Takekawa + */ +void adtvk503_audio(struct bttv *btv, struct v4l2_tuner *t, int set) +{ + unsigned int con = 0xffffff; + + /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */ + + if (set) { + /* btor(***, BT848_GPIO_OUT_EN); */ + if (t->audmode & V4L2_TUNER_MODE_LANG1) + con = 0x00000000; + if (t->audmode & V4L2_TUNER_MODE_LANG2) + con = 0x00180000; + if (t->audmode & V4L2_TUNER_MODE_STEREO) + con = 0x00000000; + if (t->audmode & V4L2_TUNER_MODE_MONO) + con = 0x00060000; + if (con != 0xffffff) { + gpio_bits(0x1e0000,con); + if (bttv_gpio) + bttv_gpio_tracking(btv, "adtvk503"); + } + } else { + t->audmode = V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO | + V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + } +} diff --git a/drivers/media/pci/bt8xx/bttv-audio-hook.h b/drivers/media/pci/bt8xx/bttv-audio-hook.h new file mode 100644 index 00000000..159d07ad --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-audio-hook.h @@ -0,0 +1,23 @@ +/* + * Handlers for board audio hooks, splitted from bttv-cards + * + * Copyright (c) 2006 Mauro Carvalho Chehab (mchehab@infradead.org) + * This code is placed under the terms of the GNU General Public License + */ + +#include "bttvp.h" + +void winview_volume (struct bttv *btv, __u16 volume); + +void lt9415_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void avermedia_tvphone_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void avermedia_tv_stereo_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void terratv_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void gvbctv3pci_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void gvbctv5pci_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void winfast2000_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void pvbt878p9b_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void fv2000s_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void windvr_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); +void adtvk503_audio(struct bttv *btv, struct v4l2_tuner *tuner, int set); + diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c new file mode 100644 index 00000000..b7dc921e --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-cards.c @@ -0,0 +1,4900 @@ +/* + + bttv-cards.c + + this file has configuration informations - card-specific stuff + like the big tvcards array for the most part + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) + (c) 1999-2001 Gerd Knorr + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "bttvp.h" +#include +#include +#include "bttv-audio-hook.h" + +/* fwd decl */ +static void boot_msp34xx(struct bttv *btv, int pin); +static void hauppauge_eeprom(struct bttv *btv); +static void avermedia_eeprom(struct bttv *btv); +static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); +static void modtec_eeprom(struct bttv *btv); +static void init_PXC200(struct bttv *btv); +static void init_RTV24(struct bttv *btv); + +static void rv605_muxsel(struct bttv *btv, unsigned int input); +static void eagle_muxsel(struct bttv *btv, unsigned int input); +static void xguard_muxsel(struct bttv *btv, unsigned int input); +static void ivc120_muxsel(struct bttv *btv, unsigned int input); +static void gvc1100_muxsel(struct bttv *btv, unsigned int input); + +static void PXC200_muxsel(struct bttv *btv, unsigned int input); + +static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); +static void picolo_tetra_init(struct bttv *btv); + +static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); +static void tibetCS16_init(struct bttv *btv); + +static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); +static void kodicom4400r_init(struct bttv *btv); + +static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); +static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); + +static void geovision_muxsel(struct bttv *btv, unsigned int input); + +static void phytec_muxsel(struct bttv *btv, unsigned int input); + +static void gv800s_muxsel(struct bttv *btv, unsigned int input); +static void gv800s_init(struct bttv *btv); + +static void td3116_muxsel(struct bttv *btv, unsigned int input); + +static int terratec_active_radio_upgrade(struct bttv *btv); +static int tea5757_read(struct bttv *btv); +static int tea5757_write(struct bttv *btv, int value); +static void identify_by_eeprom(struct bttv *btv, + unsigned char eeprom_data[256]); +static int pvr_boot(struct bttv *btv); + +/* config variables */ +static unsigned int triton1; +static unsigned int vsfx; +static unsigned int latency = UNSET; +int no_overlay=-1; + +static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int audiodev[BTTV_MAX]; +static unsigned int saa6588[BTTV_MAX]; +static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; +static unsigned int autoload = UNSET; +static unsigned int gpiomask = UNSET; +static unsigned int audioall = UNSET; +static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; + +/* insmod options */ +module_param(triton1, int, 0444); +module_param(vsfx, int, 0444); +module_param(no_overlay, int, 0444); +module_param(latency, int, 0444); +module_param(gpiomask, int, 0444); +module_param(audioall, int, 0444); +module_param(autoload, int, 0444); + +module_param_array(card, int, NULL, 0444); +module_param_array(pll, int, NULL, 0444); +module_param_array(tuner, int, NULL, 0444); +module_param_array(svhs, int, NULL, 0444); +module_param_array(remote, int, NULL, 0444); +module_param_array(audiodev, int, NULL, 0444); +module_param_array(audiomux, int, NULL, 0444); + +MODULE_PARM_DESC(triton1,"set ETBF pci config bit " + "[enable bug compatibility for triton1 + others]"); +MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " + "[yet another chipset flaw workaround]"); +MODULE_PARM_DESC(latency,"pci latency timer"); +MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); +MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); +MODULE_PARM_DESC(tuner,"specify installed tuner type"); +MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore"); +MODULE_PARM_DESC(audiodev, "specify audio device:\n" + "\t\t-1 = no audio\n" + "\t\t 0 = autodetect (default)\n" + "\t\t 1 = msp3400\n" + "\t\t 2 = tda7432\n" + "\t\t 3 = tvaudio"); +MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); +MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" + " [some VIA/SIS chipsets are known to have problem with overlay]"); + +/* ----------------------------------------------------------------------- */ +/* list of card IDs for bt878+ cards */ + +static struct CARD { + unsigned id; + int cardnr; + char *name; +} cards[] = { + { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, + { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, + { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, + { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, + { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, + { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, + { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, + { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, + { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, + + { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, + { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, + + { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, + { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, + { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, + { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, + { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, + { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, + { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, + { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, + + { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, + /* some cards ship with byteswapped IDs ... */ + { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, + { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, + /* this seems to happen as well ... */ + { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, + + { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, + { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, + { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, + + { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, + { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, + { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, + { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, + { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, + { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, + { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, + + { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, + { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, + { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, + { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, + { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, + + { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, + { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, + { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, + { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, + + { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, + { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, + /* clashes with FlyVideo + *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ + { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, + { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ + { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ + { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ + + { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, + { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, + { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + + { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, + { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, + { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, + { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, + { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, + + { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, + { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, + { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, + { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, + + { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, + { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, + { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, + { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, + + { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, + { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" }, + { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" }, + { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" }, + { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" }, + + { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, + { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, + + { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, + { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, + { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, + { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, + { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, + { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, + + { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, + { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, + + { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, + { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" }, + { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" }, + { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, + { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, + { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, + { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, + { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, + + { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, + { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, + + { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, + { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, + { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, + { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, + + { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, + + { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, + { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, + + /* likely broken, vendor id doesn't match the other magic views ... + * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ + + /* Duplicate PCI ID, reconfigure for this board during the eeprom read. + * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ + + { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"}, + + /* DVB cards (using pci function .1 for mpeg data xfer) */ + { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, + { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, + { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, + { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, + { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, + { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, + { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, + { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, + { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, + { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, + { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, + { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, + { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, + { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, + { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, + { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" }, + { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, + { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, + { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, + + { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" }, + { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" }, + { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" }, + { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" }, + { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" }, + { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, + { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, + { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, + { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, + { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" }, + { 0, -1, NULL } +}; + +/* ----------------------------------------------------------------------- */ +/* array with description for bt848 / bt878 tv/grabber cards */ + +struct tvcard bttv_tvcards[] = { + /* ---- card 0x00 ---------------------------------- */ + [BTTV_BOARD_UNKNOWN] = { + .name = " *** UNKNOWN/GENERIC *** ", + .video_inputs = 4, + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MIRO] = { + .name = "MIRO PCTV", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_HAUPPAUGE] = { + .name = "Hauppauge (bt848)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_STB] = { + .name = "STB, Gateway P/N 6000699 (bt848)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 4, 0, 2, 3 }, + .gpiomute = 1, + .no_msp34xx = 1, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + + /* ---- card 0x04 ---------------------------------- */ + [BTTV_BOARD_INTEL] = { + .name = "Intel Create and Share PCI/ Smart Video Recorder III", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 2, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_DIAMOND] = { + .name = "Diamond DTV2000", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 3, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0, 1, 0, 1 }, + .gpiomute = 3, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AVERMEDIA] = { + .name = "AVerMedia TVPhone", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 3, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomask = 0x0f, + .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, + /* 0x04 for some cards ?? */ + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= avermedia_tvphone_audio, + .has_remote = 1, + }, + [BTTV_BOARD_MATRIX_VISION] = { + .name = "MATRIX-Vision MV-Delta", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0, 0), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x08 ---------------------------------- */ + [BTTV_BOARD_FLYVIDEO] = { + .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xc00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0xc00, 0x800, 0x400 }, + .gpiomute = 0xc00, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TURBOTV] = { + .name = "IMS/IXmicro TurboTV", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 3, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 1, 2, 3 }, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_HAUPPAUGE878] = { + .name = "Hauppauge (bt878)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x0f, /* old: 7 */ + .muxsel = MUXSEL(2, 0, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MIROPRO] = { + .name = "MIRO PCTV pro", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3014f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20001,0x10001, 0, 0 }, + .gpiomute = 10, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x0c ---------------------------------- */ + [BTTV_BOARD_ADSTECH_TV] = { + .name = "ADS Technologies Channel Surfer TV (bt848)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 13, 14, 11, 7 }, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AVERMEDIA98] = { + .name = "AVerMedia TVCapture 98", + .video_inputs = 3, + /* .audio_inputs= 4, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 13, 14, 11, 7 }, + .msp34xx_alt = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= avermedia_tv_stereo_audio, + .no_gpioirq = 1, + }, + [BTTV_BOARD_VHX] = { + .name = "Aimslab Video Highway Xtreme (VHX)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ + .gpiomute = 4, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ZOLTRIX] = { + .name = "Zoltrix TV-Max", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 1, 0 }, + .gpiomute = 10, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x10 ---------------------------------- */ + [BTTV_BOARD_PIXVIEWPLAYTV] = { + .name = "Prolink Pixelview PlayTV (bt878)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x01fe00, + .muxsel = MUXSEL(2, 3, 1, 1), + /* 2003-10-20 by "Anton A. Arapov" */ + .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, + .gpiomute = 0x002000, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_WINVIEW_601] = { + .name = "Leadtek WinView 601", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x8300f8, + .muxsel = MUXSEL(2, 3, 1, 1, 0), + .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, + .gpiomute = 0xcfa007, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .volume_gpio = winview_volume, + .has_radio = 1, + }, + [BTTV_BOARD_AVEC_INTERCAP] = { + .name = "AVEC Intercapture", + .video_inputs = 3, + /* .audio_inputs= 2, */ + .svhs = 2, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 0, 0, 0 }, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_LIFE_FLYKIT] = { + .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 0x8dff00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x14 ---------------------------------- */ + [BTTV_BOARD_CEI_RAFFLES] = { + .name = "CEI Raffles Card", + .video_inputs = 3, + /* .audio_inputs= 3, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 1), + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_CONFERENCETV] = { + .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", + .video_inputs = 4, + /* .audio_inputs= 2, tuner, line in */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_PHOEBE_TVMAS] = { + .name = "Askey CPH050/ Phoebe Tv Master + FM", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xc00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 0x800, 0x400 }, + .gpiomute = 0xc00, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MODTEC_205] = { + .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .has_dig_in = 1, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */ + /* .digital_mode= DIGITAL_MODE_CAMERA, */ + .gpiomux = { 0, 0, 0, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ALPS_TSBB5_PAL_I, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x18 ---------------------------------- */ + [BTTV_BOARD_MAGICTVIEW061] = { + .name = "Askey CPH05X/06X (bt878) [many vendors]", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xe00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = {0x400, 0x400, 0x400, 0x400 }, + .gpiomute = 0xc00, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + .has_radio = 1, /* not every card has radio */ + }, + [BTTV_BOARD_VOBIS_BOOSTAR] = { + .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x1f0fff, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, + .gpiomute = 0x40000, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= terratv_audio, + }, + [BTTV_BOARD_HAUPPAUG_WCAM] = { + .name = "Hauppauge WinCam newer (bt878)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 7, + .muxsel = MUXSEL(2, 0, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MAXI] = { + .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", + .video_inputs = 4, + /* .audio_inputs= 2, */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_SECAM, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x1c ---------------------------------- */ + [BTTV_BOARD_TERRATV] = { + .name = "Terratec TerraTV+ Version 1.1 (bt878)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x1f0fff, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, + .gpiomute = 0x40000, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= terratv_audio, + /* GPIO wiring: + External 20 pin connector (for Active Radio Upgrade board) + gpio00: i2c-sda + gpio01: i2c-scl + gpio02: om5610-data + gpio03: om5610-clk + gpio04: om5610-wre + gpio05: om5610-stereo + gpio06: rds6588-davn + gpio07: Pin 7 n.c. + gpio08: nIOW + gpio09+10: nIOR, nSEL ?? (bt878) + gpio09: nIOR (bt848) + gpio10: nSEL (bt848) + Sound Routing: + gpio16: u2-A0 (1st 4052bt) + gpio17: u2-A1 + gpio18: u2-nEN + gpio19: u4-A0 (2nd 4052) + gpio20: u4-A1 + u4-nEN - GND + Btspy: + 00000 : Cdrom (internal audio input) + 10000 : ext. Video audio input + 20000 : TV Mono + a0000 : TV Mono/2 + 1a0000 : TV Stereo + 30000 : Radio + 40000 : Mute + */ + + }, + [BTTV_BOARD_PXC200] = { + /* Jannik Fritsch */ + .name = "Imagenation PXC200", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 1, /* was: 4 */ + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0, 0), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .muxsel_hook = PXC200_muxsel, + + }, + [BTTV_BOARD_FLYVIDEO_98] = { + .name = "Lifeview FlyVideo 98 LR50", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x1800, /* 0x8dfe00 */ + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_IPROTV] = { + .name = "Formac iProTV, Formac ProTV I (bt848)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 1, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 0, 0, 0 }, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x20 ---------------------------------- */ + [BTTV_BOARD_INTEL_C_S_PCI] = { + .name = "Intel Create and Share PCI/ Smart Video Recorder III", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 2, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TERRATVALUE] = { + .name = "Terratec TerraTValue Version Bt878", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xffff00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x500, 0, 0x300, 0x900 }, + .gpiomute = 0x900, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_WINFAST2000] = { + .name = "Leadtek WinFast 2000/ WinFast 2000 XP", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + /* TV, CVid, SVid, CVid over SVid connector */ + .muxsel = MUXSEL(2, 3, 1, 1, 0), + /* Alexander Varakin [stereo version] */ + .gpiomask = 0xb33000, + .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, + .gpiomute = 0x800000, + /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) + gpio23 -- hef4052:nEnable (0x800000) + gpio12 -- hef4052:A1 + gpio13 -- hef4052:A0 + 0x0000: external audio + 0x1000: FM + 0x2000: TV + 0x3000: n.c. + Note: There exists another variant "Winfast 2000" with tv stereo !? + Note: eeprom only contains FF and pci subsystem id 107d:6606 + */ + .pll = PLL_28, + .has_radio = 1, + .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= winfast2000_audio, + .has_remote = 1, + }, + [BTTV_BOARD_CHRONOS_VS2] = { + .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x24 ---------------------------------- */ + [BTTV_BOARD_TYPHOON_TVIEW] = { + .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + [BTTV_BOARD_PXELVWPLTVPRO] = { + .name = "Prolink PixelView PlayTV pro", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xff, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, + .gpiomute = 0x29, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MAGICTVIEW063] = { + .name = "Askey CPH06X TView99", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x551e00, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0x551400, 0x551200, 0, 0 }, + .gpiomute = 0x551c00, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + }, + [BTTV_BOARD_PINNACLE] = { + .name = "Pinnacle PCTV Studio/Rave", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x03000F, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0xd0001, 0, 0 }, + .gpiomute = 1, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x28 ---------------------------------- */ + [BTTV_BOARD_STB2] = { + .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 4, 0, 2, 3 }, + .gpiomute = 1, + .no_msp34xx = 1, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + [BTTV_BOARD_AVPHONE98] = { + .name = "AVerMedia TVPhone 98", + .video_inputs = 3, + /* .audio_inputs= 4, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 13, 4, 11, 7 }, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + .audio_mode_gpio= avermedia_tvphone_audio, + }, + [BTTV_BOARD_PV951] = { + .name = "ProVideo PV951", /* pic16c54 */ + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 0, 0}, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ONAIR_TV] = { + .name = "Little OnAir TV", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xe00b, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, + .gpiomute = 0xff3ffc, + .no_msp34xx = 1, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x2c ---------------------------------- */ + [BTTV_BOARD_SIGMA_TVII_FM] = { + .name = "Sigma TVII-FM", + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 3, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 1, 0, 2 }, + .gpiomute = 3, + .no_msp34xx = 1, + .pll = PLL_NONE, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MATRIX_VISION2] = { + .name = "MATRIX-Vision MV-Delta 2", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0, 0), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ZOLTRIX_GENIE] = { + .name = "Zoltrix Genie TV/FM", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xbcf03f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, + .gpiomute = 0xbcb03f, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4039FR5_NTSC, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TERRATVRADIO] = { + .name = "Terratec TV/Radio+", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x70000, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, + .gpiomute = 0x40000, + .no_msp34xx = 1, + .pll = PLL_35, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + + /* ---- card 0x30 ---------------------------------- */ + [BTTV_BOARD_DYNALINK] = { + .name = "Askey CPH03x/ Dynalink Magic TView", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = {2,0,0,0 }, + .gpiomute = 1, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GVBCTV3PCI] = { + .name = "IODATA GV-BCTV3/PCI", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x010f00, + .muxsel = MUXSEL(2, 3, 0, 0), + .gpiomux = {0x10000, 0, 0x10000, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ALPS_TSHC6_NTSC, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= gvbctv3pci_audio, + }, + [BTTV_BOARD_PXELVWPLTVPAK] = { + .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 3, + .has_dig_in = 1, + .gpiomask = 0xAA0000, + .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ + /* .digital_mode= DIGITAL_MODE_CAMERA, */ + .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, + .gpiomute = 0xa8000, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + /* GPIO wiring: (different from Rev.4C !) + GPIO17: U4.A0 (first hef4052bt) + GPIO19: U4.A1 + GPIO20: U5.A1 (second hef4052bt) + GPIO21: U4.nEN + GPIO22: BT832 Reset Line + GPIO23: A5,A0, U5,nEN + Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 + */ + }, + [BTTV_BOARD_EAGLE] = { + .name = "Eagle Wireless Capricorn2 (bt878A)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 0, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .pll = PLL_28, + .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x34 ---------------------------------- */ + [BTTV_BOARD_PINNACLEPRO] = { + /* David Härdeman */ + .name = "Pinnacle PCTV Studio Pro", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 0x03000F, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 0xd0001, 0, 0 }, + .gpiomute = 10, + /* sound path (5 sources): + MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) + 0= ext. Audio IN + 1= from MUX2 + 2= Mono TV sound from Tuner + 3= not connected + MUX2 (mask 0x30000): + 0,2,3= from MSP34xx + 1= FM stereo Radio from Tuner */ + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TVIEW_RDS_FM] = { + /* Claas Langbehn , + Sven Grothklags */ + .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 0x1c, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 0x10, 8 }, + .gpiomute = 4, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + [BTTV_BOARD_LIFETEC_9415] = { + /* Tim Röstermundt + in de.comp.os.unix.linux.hardware: + options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 + gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff + options tuner type=5 */ + .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x18e0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, + .gpiomute = 0x18e0, + /* For cards with tda9820/tda9821: + 0x0000: Tuner normal stereo + 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) + 0x0880: Tuner A2 stereo */ + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_BESTBUY_EASYTV] = { + /* Miguel Angel Alvarez + old Easy TV BT848 version (model CPH031) */ + .name = "Askey CPH031/ BESTBUY Easy TV", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xF, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x38 ---------------------------------- */ + [BTTV_BOARD_FLYVIDEO_98FM] = { + /* Gordon Heydon */ + [BTTV_BOARD_GRANDTEC] = { + .name = "GrandTec 'Grand Video Capture' (Bt848)", + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .gpiomask = 0, + .muxsel = MUXSEL(3, 1), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_35, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ASKEY_CPH060] = { + /* Daniel Herrington */ + .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xe00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, + .gpiomute = 0x800, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4036FY5_NTSC, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ASKEY_CPH03X] = { + /* Matti Mottus */ + .name = "Askey CPH03x TV Capturer", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x03000F, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 1, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + }, + + /* ---- card 0x3c ---------------------------------- */ + [BTTV_BOARD_MM100PCTV] = { + /* Philip Blundell */ + .name = "Modular Technology MM100PCTV", + .video_inputs = 2, + /* .audio_inputs= 2, */ + .svhs = NO_SVHS, + .gpiomask = 11, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0, 0, 1 }, + .gpiomute = 8, + .pll = PLL_35, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GMV1] = { + /* Adrian Cox + new Easy TV BT878 version (model CPH061) + special thanks to Informatica Mieres for providing the card */ + .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", + .video_inputs = 3, + /* .audio_inputs= 2, */ + .svhs = 2, + .gpiomask = 0xFF, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 1, 0, 4, 4 }, + .gpiomute = 9, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ATI_TVWONDER] = { + /* Lukas Gebauer */ + .name = "ATI TV-Wonder", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xf03f, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, + .gpiomute = 0xbffe, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x40 ---------------------------------- */ + [BTTV_BOARD_ATI_TVWONDERVE] = { + /* Lukas Gebauer */ + .name = "ATI TV-Wonder VE", + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 1, + .muxsel = MUXSEL(2, 3, 0, 1), + .gpiomux = { 0, 0, 1, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_FLYVIDEO2000] = { + /* DeeJay */ + .name = "IODATA GV-BCTV4/PCI", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x010f00, + .muxsel = MUXSEL(2, 3, 0, 0), + .gpiomux = {0x10000, 0, 0x10000, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= gvbctv3pci_audio, + }, + + /* ---- card 0x44 ---------------------------------- */ + [BTTV_BOARD_VOODOOTV_FM] = { + .name = "3Dfx VoodooTV FM (Euro)", + /* try "insmod msp3400 simple=0" if you have + * sound problems with this card. */ + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 0x4f8a00, + /* 0x100000: 1=MSP enabled (0=disable again) + * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ + .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, + .gpiomute = 0x947fff, + /* tvtuner, radio, external,internal, mute, stereo + * tuner, Composit, SVid, Composit-on-Svid-adapter */ + .muxsel = MUXSEL(2, 3, 0, 1), + .tuner_type = TUNER_MT2032, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + [BTTV_BOARD_VOODOOTV_200] = { + .name = "VoodooTV 200 (USA)", + /* try "insmod msp3400 simple=0" if you have + * sound problems with this card. */ + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 0x4f8a00, + /* 0x100000: 1=MSP enabled (0=disable again) + * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ + .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, + .gpiomute = 0x947fff, + /* tvtuner, radio, external,internal, mute, stereo + * tuner, Composit, SVid, Composit-on-Svid-adapter */ + .muxsel = MUXSEL(2, 3, 0, 1), + .tuner_type = TUNER_MT2032, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + [BTTV_BOARD_AIMMS] = { + /* Philip Blundell */ + .name = "Active Imaging AIMMS", + .video_inputs = 1, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .muxsel = MUXSEL(2), + .gpiomask = 0 + }, + [BTTV_BOARD_PV_BT878P_PLUS] = { + /* Tomasz Pyra */ + .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", + .video_inputs = 3, + /* .audio_inputs= 4, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ + .gpiomute = 13, + .pll = PLL_28, + .tuner_type = TUNER_LG_PAL_I_FM, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + /* GPIO wiring: + GPIO0: U4.A0 (hef4052bt) + GPIO1: U4.A1 + GPIO2: U4.A1 (second hef4052bt) + GPIO3: U4.nEN, U5.A0, A5.nEN + GPIO8-15: vrd866b ? + */ + }, + [BTTV_BOARD_FLYVIDEO98EZ] = { + .name = "Lifeview FlyVideo 98EZ (capture only) LR51", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 2, + /* AV1, AV2, SVHS, CVid adapter on SVHS */ + .muxsel = MUXSEL(2, 3, 1, 1), + .pll = PLL_28, + .no_msp34xx = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x48 ---------------------------------- */ + [BTTV_BOARD_PV_BT878P_9B] = { + /* Dariusz Kowalewski */ + .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, + .gpiomute = 0x09, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ + .has_radio = 1, /* Note: not all cards have radio */ + .has_remote = 1, + /* GPIO wiring: + GPIO0: A0 hef4052 + GPIO1: A1 hef4052 + GPIO3: nEN hef4052 + GPIO8-15: vrd866b + GPIO20,22,23: R30,R29,R28 + */ + }, + [BTTV_BOARD_SENSORAY311_611] = { + /* Clay Kunz */ + /* you must jumper JP5 for the 311 card (PC/104+) to work */ + .name = "Sensoray 311/611", + .video_inputs = 5, + /* .audio_inputs= 0, */ + .svhs = 4, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0, 0), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_RV605] = { + /* Miguel Freitas */ + .name = "RemoteVision MX (RV605)", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x00, + .gpiomask2 = 0x07ff, + .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), + .no_msp34xx = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .muxsel_hook = rv605_muxsel, + }, + [BTTV_BOARD_POWERCLR_MTV878] = { + .name = "Powercolor MTV878/ MTV878R/ MTV878F", + .video_inputs = 3, + /* .audio_inputs= 2, */ + .svhs = 2, + .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ + .muxsel = MUXSEL(2, 1, 1), + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 4, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + + /* ---- card 0x4c ---------------------------------- */ + [BTTV_BOARD_WINDVR] = { + /* Masaki Suzuki */ + .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x140007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= windvr_audio, + }, + [BTTV_BOARD_GRANDTEC_MULTI] = { + .name = "GrandTec Multi Capture Card (Bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_KWORLD] = { + .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 7, + /* Tuner, SVid, SVHS, SVid to SVHS connector */ + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! + * This card lacks external Audio In, so we mute it on Ext. & Int. + * The PCB can take a sbx1637/sbx1673, wiring unknown. + * This card lacks PCI subsystem ID, sigh. + * gpiomux =1: lower volume, 2+3: mute + * btwincap uses 0x80000/0x80003 + */ + .gpiomute = 4, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and + radio signal strength indicators work fine. */ + .has_radio = 1, + /* GPIO Info: + GPIO0,1: HEF4052 A0,A1 + GPIO2: HEF4052 nENABLE + GPIO3-7: n.c. + GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] + GPIO14,15: ?? + GPIO16-21: n.c. + GPIO22,23: ?? + ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ + }, + [BTTV_BOARD_DSP_TCVIDEO] = { + /* Arthur Tetzlaff-Deas, DSP Design Ltd */ + .name = "DSP Design TCVIDEO", + .video_inputs = 4, + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 1, 0), + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x50 ---------------------------------- */ + [BTTV_BOARD_HAUPPAUGEPVR] = { + .name = "Hauppauge WinTV PVR", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 0, 1, 1), + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + + .gpiomask = 7, + .gpiomux = {7}, + }, + [BTTV_BOARD_GVBCTV5PCI] = { + .name = "IODATA GV-BCTV5/PCI", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x0f0f80, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = {0x030000, 0x010000, 0, 0 }, + .gpiomute = 0x020000, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= gvbctv5pci_audio, + .has_radio = 1, + }, + [BTTV_BOARD_OSPREY1x0] = { + .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ + .video_inputs = 4, /* id-inputs-clock */ + /* .audio_inputs= 0, */ + .svhs = 3, + .muxsel = MUXSEL(3, 2, 0, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x0_848] = { + .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ + .video_inputs = 3, + /* .audio_inputs= 0, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + + /* ---- card 0x54 ---------------------------------- */ + [BTTV_BOARD_OSPREY101_848] = { + .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .muxsel = MUXSEL(3, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x1] = { + .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ + .video_inputs = 1, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(0), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x1_SVID] = { + .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .muxsel = MUXSEL(0, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY2xx] = { + .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ + .video_inputs = 1, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(0), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + + /* ---- card 0x58 ---------------------------------- */ + [BTTV_BOARD_OSPREY2x0_SVID] = { + .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = 1, + .muxsel = MUXSEL(0, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY2x0] = { + .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = 1, + .muxsel = MUXSEL(2, 3), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY500] = { + .name = "Osprey 500", /* 500 */ + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = 1, + .muxsel = MUXSEL(2, 3), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY540] = { + .name = "Osprey 540", /* 540 */ + .video_inputs = 4, + /* .audio_inputs= 1, */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + + /* ---- card 0x5C ---------------------------------- */ + [BTTV_BOARD_OSPREY2000] = { + .name = "Osprey 2000", /* 2000 */ + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = 1, + .muxsel = MUXSEL(2, 3), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ + }, + [BTTV_BOARD_IDS_EAGLE] = { + /* M G Berberich */ + .name = "IDS Eagle", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 2, 2, 2), + .muxsel_hook = eagle_muxsel, + .no_msp34xx = 1, + .pll = PLL_28, + }, + [BTTV_BOARD_PINNACLESAT] = { + .name = "Pinnacle PCTV Sat", + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel = MUXSEL(3, 1), + .pll = PLL_28, + .no_gpioirq = 1, + .has_dvb = 1, + }, + [BTTV_BOARD_FORMAC_PROTV] = { + .name = "Formac ProTV II (bt878)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 2, + /* TV, Comp1, Composite over SVID con, SVID */ + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 2, 0, 0 }, + .pll = PLL_28, + .has_radio = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + /* sound routing: + GPIO=0x00,0x01,0x03: mute (?) + 0x02: both TV and radio (tuner: FM1216/I) + The card has onboard audio connectors labeled "cdrom" and "board", + not soldered here, though unknown wiring. + Card lacks: external audio in, pci subsystem id. + */ + }, + + /* ---- card 0x60 ---------------------------------- */ + [BTTV_BOARD_MACHTV] = { + .name = "MachTV", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 3}, + .gpiomute = 4, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + }, + [BTTV_BOARD_EURESYS_PICOLO] = { + .name = "Euresys Picolo", + .video_inputs = 3, + /* .audio_inputs= 0, */ + .svhs = 2, + .gpiomask = 0, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel = MUXSEL(2, 0, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_PV150] = { + /* Luc Van Hoeylandt */ + .name = "ProVideo PV150", /* 0x4f */ + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AD_TVK503] = { + /* Hiroshi Takekawa */ + /* This card lacks subsystem ID */ + .name = "AD-TVK503", /* 0x63 */ + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x001e8007, + .muxsel = MUXSEL(2, 3, 1, 0), + /* Tuner, Radio, external, internal, off, on */ + .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, + .gpiomute = 0x0f, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= adtvk503_audio, + }, + + /* ---- card 0x64 ---------------------------------- */ + [BTTV_BOARD_HERCULES_SM_TV] = { + .name = "Hercules Smart TV Stereo", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x00, + .muxsel = MUXSEL(2, 3, 1, 1), + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + /* Notes: + - card lacks subsystem ID + - stereo variant w/ daughter board with tda9874a @0xb0 + - Audio Routing: + always from tda9874 independent of GPIO (?) + external line in: unknown + - Other chips: em78p156elp @ 0x96 (probably IR remote control) + hef4053 (instead 4052) for unknown function + */ + }, + [BTTV_BOARD_PACETV] = { + .name = "Pace TV & Radio Card", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + /* Tuner, CVid, SVid, CVid over SVid connector */ + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomask = 0, + .no_tda7432 = 1, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + .pll = PLL_28, + /* Bt878, Bt832, FI1246 tuner; no pci subsystem id + only internal line out: (4pin header) RGGL + Radio must be decoded by msp3410d (not routed through)*/ + /* + .digital_mode = DIGITAL_MODE_CAMERA, todo! + */ + }, + [BTTV_BOARD_IVC200] = { + /* Chris Willing */ + .name = "IVC-200", + .video_inputs = 1, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0xdf, + .muxsel = MUXSEL(2), + .pll = PLL_28, + }, + [BTTV_BOARD_IVCE8784] = { + .name = "IVCE-8784", + .video_inputs = 1, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0xdf, + .muxsel = MUXSEL(2), + .pll = PLL_28, + }, + [BTTV_BOARD_XGUARD] = { + .name = "Grand X-Guard / Trust 814PCI", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .gpiomask2 = 0xff, + .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), + .muxsel_hook = xguard_muxsel, + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + }, + + /* ---- card 0x68 ---------------------------------- */ + [BTTV_BOARD_NEBULA_DIGITV] = { + .name = "Nebula Electronics DigiTV", + .video_inputs = 1, + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 1, 0), + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .has_dvb = 1, + .has_remote = 1, + .gpiomask = 0x1b, + .no_gpioirq = 1, + }, + [BTTV_BOARD_PV143] = { + /* Jorge Boncompte - DTI2 */ + .name = "ProVideo PV143", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { + /* M.Klahr@phytec.de */ + .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009X1_VD011_COMBI] = { + .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x6c ---------------------------------- */ + [BTTV_BOARD_VD009_MINIDIN] = { + .name = "PHYTEC VD-009 MiniDIN (bt878)", + .video_inputs = 10, + /* .audio_inputs= 0, */ + .svhs = 9, + .gpiomask = 0x00, + .gpiomask2 = 0x03, /* used for external vodeo mux */ + .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), + .muxsel_hook = phytec_muxsel, + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009_COMBI] = { + .name = "PHYTEC VD-009 Combi (bt878)", + .video_inputs = 10, + /* .audio_inputs= 0, */ + .svhs = 9, + .gpiomask = 0x00, + .gpiomask2 = 0x03, /* used for external vodeo mux */ + .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), + .muxsel_hook = phytec_muxsel, + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_IVC100] = { + .name = "IVC-100", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0xdf, + .muxsel = MUXSEL(2, 3, 1, 0), + .pll = PLL_28, + }, + [BTTV_BOARD_IVC120] = { + /* IVC-120G - Alan Garfield */ + .name = "IVC-120G", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, /* card has no svhs */ + .no_msp34xx = 1, + .no_tda7432 = 1, + .gpiomask = 0x00, + .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), + .muxsel_hook = ivc120_muxsel, + .pll = PLL_28, + }, + + /* ---- card 0x70 ---------------------------------- */ + [BTTV_BOARD_PC_HDTV] = { + .name = "pcHDTV HD-2000 TV", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = TUNER_PHILIPS_FCV1236D, + .tuner_addr = ADDR_UNSET, + .has_dvb = 1, + }, + [BTTV_BOARD_TWINHAN_DST] = { + .name = "Twinhan DST + clones", + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_video = 1, + .has_dvb = 1, + }, + [BTTV_BOARD_WINFASTVC100] = { + .name = "Winfast VC100", + .video_inputs = 3, + /* .audio_inputs= 0, */ + .svhs = 1, + /* Vid In, SVid In, Vid over SVid in connector */ + .muxsel = MUXSEL(3, 1, 1, 3), + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + }, + [BTTV_BOARD_TEV560] = { + .name = "Teppro TEV-560/InterVision IV-560", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 3, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 1, 1, 1 }, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .pll = PLL_35, + }, + + /* ---- card 0x74 ---------------------------------- */ + [BTTV_BOARD_SIMUS_GVC1100] = { + .name = "SIMUS GVC1100", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .muxsel = MUXSEL(2, 2, 2, 2), + .gpiomask = 0x3F, + .muxsel_hook = gvc1100_muxsel, + }, + [BTTV_BOARD_NGSTV_PLUS] = { + /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ + .name = "NGS NGSTV+", + .video_inputs = 3, + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = MUXSEL(2, 3, 0, 0), + .gpiomux = { 0, 0, 0, 0 }, + .gpiomute = 0x000003, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + }, + [BTTV_BOARD_LMLBT4] = { + /* http://linuxmedialabs.com */ + .name = "LMLBT4", + .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 1, 0), + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TEKRAM_M205] = { + /* Helmroos Harri */ + .name = "Tekram M205 PRO", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .svhs = 2, + .gpiomask = 0x68, + .muxsel = MUXSEL(2, 3, 1), + .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, + .pll = PLL_28, + }, + + /* ---- card 0x78 ---------------------------------- */ + [BTTV_BOARD_CONTVFMI] = { + /* Javier Cendan Ares */ + /* bt878 TV + FM without subsystem ID */ + .name = "Conceptronic CONTVFMi", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 3, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + .has_radio = 1, + }, + [BTTV_BOARD_PICOLO_TETRA_CHIP] = { + /*Eric DEBIEF */ + /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ + /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ + /*0x79 in bttv.h*/ + .name = "Euresys Picolo Tetra", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ + .no_msp34xx = 1, + .no_tda7432 = 1, + /*878A input is always MUX0, see above.*/ + .muxsel = MUXSEL(2, 2, 2, 2), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_SPIRIT_TV] = { + /* Spirit TV Tuner from http://spiritmodems.com.au */ + /* Stafford Goodsell */ + .name = "Spirit TV Tuner", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x0000000f, + .muxsel = MUXSEL(2, 1, 1), + .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + }, + [BTTV_BOARD_AVDVBT_771] = { + /* Wolfram Joost */ + .name = "AVerMedia AVerTV DVB-T 771", + .video_inputs = 2, + .svhs = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .muxsel = MUXSEL(3, 3), + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .has_dvb = 1, + .no_gpioirq = 1, + .has_remote = 1, + }, + /* ---- card 0x7c ---------------------------------- */ + [BTTV_BOARD_AVDVBT_761] = { + /* Matt Jesson */ + /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ + .name = "AverMedia AverTV DVB-T 761", + .video_inputs = 2, + .svhs = 1, + .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .has_dvb = 1, + .no_gpioirq = 1, + .has_remote = 1, + }, + [BTTV_BOARD_MATRIX_VISIONSQ] = { + /* andre.schwarz@matrix-vision.de */ + .name = "MATRIX Vision Sigma-SQ", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x0, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3), + .muxsel_hook = sigmaSQ_muxsel, + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MATRIX_VISIONSLC] = { + /* andre.schwarz@matrix-vision.de */ + .name = "MATRIX Vision Sigma-SLC", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x0, + .muxsel = MUXSEL(2, 2, 2, 2), + .muxsel_hook = sigmaSLC_muxsel, + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + /* BTTV_BOARD_APAC_VIEWCOMP */ + [BTTV_BOARD_APAC_VIEWCOMP] = { + /* Attila Kondoros */ + /* bt878 TV + FM 0x00000000 subsystem ID */ + .name = "APAC Viewcomp 878(AMAX)", + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 0xFF, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ + .has_radio = 1, /* not every card has radio */ + }, + + /* ---- card 0x80 ---------------------------------- */ + [BTTV_BOARD_DVICO_DVBT_LITE] = { + /* Chris Pascoe */ + .name = "DViCO FusionHDTV DVB-T Lite", + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .no_video = 1, + .has_dvb = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VGEAR_MYVCD] = { + /* Steven */ + .name = "V-Gear MyVCD", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = {0x31, 0x31, 0x31, 0x31 }, + .gpiomute = 0x31, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .tuner_addr = ADDR_UNSET, + .has_radio = 0, + }, + [BTTV_BOARD_SUPER_TV] = { + /* Rick C */ + .name = "Super TV Tuner", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .gpiomask = 0x008007, + .gpiomux = { 0, 0x000001,0,0 }, + .has_radio = 1, + }, + [BTTV_BOARD_TIBET_CS16] = { + /* Chris Fanning */ + .name = "Tibet Systems 'Progress DVR' CS16", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .muxsel_hook = tibetCS16_muxsel, + }, + [BTTV_BOARD_KODICOM_4400R] = { + /* Bill Brack */ + /* + * Note that, because of the card's wiring, the "master" + * BT878A chip (i.e. the one which controls the analog switch + * and must use this card type) is the 2nd one detected. The + * other 3 chips should use card type 0x85, whose description + * follows this one. There is a EEPROM on the card (which is + * connected to the I2C of one of those other chips), but is + * not currently handled. There is also a facility for a + * "monitor", which is also not currently implemented. + */ + .name = "Kodicom 4400R (master)", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + /* GPIO bits 0-9 used for analog switch: + * 00 - 03: camera selector + * 04 - 06: channel (controller) selector + * 07: data (1->on, 0->off) + * 08: strobe + * 09: reset + * bit 16 is input from sync separator for the channel + */ + .gpiomask = 0x0003ff, + .no_gpioirq = 1, + .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel_hook = kodicom4400r_muxsel, + }, + [BTTV_BOARD_KODICOM_4400R_SL] = { + /* Bill Brack */ + /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the + * one which controls the analog switch, and must use the card type) + * is the 2nd one detected. The other 3 chips should use this card + * type + */ + .name = "Kodicom 4400R (slave)", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0x010000, + .no_gpioirq = 1, + .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel_hook = kodicom4400r_muxsel, + }, + /* ---- card 0x86---------------------------------- */ + [BTTV_BOARD_ADLINK_RTV24] = { + /* Michael Henson */ + /* Adlink RTV24 with special unlock codes */ + .name = "Adlink RTV24", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + }, + /* ---- card 0x87---------------------------------- */ + [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { + /* Michael Krufky */ + .name = "DViCO FusionHDTV 5 Lite", + .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ + .tuner_addr = ADDR_UNSET, + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1), + .gpiomask = 0x00e00007, + .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, + .gpiomute = 0x00c00007, + .no_msp34xx = 1, + .no_tda7432 = 1, + .has_dvb = 1, + }, + /* ---- card 0x88---------------------------------- */ + [BTTV_BOARD_ACORP_Y878F] = { + /* Mauro Carvalho Chehab */ + .name = "Acorp Y878F", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x01fe00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, + .gpiomute = 0x002000, + .pll = PLL_28, + .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, + .tuner_addr = 0xc1 >>1, + .has_radio = 1, + }, + /* ---- card 0x89 ---------------------------------- */ + [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { + .name = "Conceptronic CTVFMi v2", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x001c0007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 3, + .pll = PLL_28, + .tuner_type = TUNER_TENA_9533_DI, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + .has_radio = 1, + }, + /* ---- card 0x8a ---------------------------------- */ + [BTTV_BOARD_PV_BT878P_2E] = { + .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 3, + .has_dig_in = 1, + .gpiomask = 0x01fe00, + .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ + /* .digital_mode= DIGITAL_MODE_CAMERA, */ + .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, + .gpiomute = 0x12400, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_LG_PAL_FM, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + }, + /* ---- card 0x8b ---------------------------------- */ + [BTTV_BOARD_PV_M4900] = { + /* Sérgio Fortier */ + .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, + .gpiomute = 0x29, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_YMEC_TVF_5533MF, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + .has_remote = 1, + }, + /* ---- card 0x8c ---------------------------------- */ + /* Has four Bt878 chips behind a PCI bridge, each chip has: + one external BNC composite input (mux 2) + three internal composite inputs (unknown muxes) + an 18-bit stereo A/D (CS5331A), which has: + one external stereo unblanced (RCA) audio connection + one (or 3?) internal stereo balanced (XLR) audio connection + input is selected via gpio to a 14052B mux + (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) + gain is controlled via an X9221A chip on the I2C bus @0x28 + sample rate is controlled via gpio to an MK1413S + (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) + There is neither a tuner nor an svideo input. */ + [BTTV_BOARD_OSPREY440] = { + .name = "Osprey 440", + .video_inputs = 4, + /* .audio_inputs= 2, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */ + .gpiomask = 0x303, + .gpiomute = 0x000, /* int + 32kHz */ + .gpiomux = { 0, 0, 0x000, 0x100}, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + /* ---- card 0x8d ---------------------------------- */ + [BTTV_BOARD_ASOUND_SKYEYE] = { + .name = "Asound Skyeye PCTV", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + }, + /* ---- card 0x8e ---------------------------------- */ + [BTTV_BOARD_SABRENT_TVFM] = { + .name = "Sabrent TV-FM (bttv version)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x108007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 100000, 100002, 100002, 100000 }, + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = TUNER_TNF_5335MF, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + /* ---- card 0x8f ---------------------------------- */ + [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { + .name = "Hauppauge ImpactVCB (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x0f, /* old: 7 */ + .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MACHTV_MAGICTV] = { + /* Julian Calaby + * Slightly different from original MachTV definition (0x60) + + * FIXME: RegSpy says gpiomask should be "0x001c800f", but it + * stuffs up remote chip. Bug is a pin on the jaecs is not set + * properly (methinks) causing no keyup bits being set */ + + .name = "MagicTV", /* rebranded MachTV */ + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .tuner_type = TUNER_TEMIC_4009FR5_PAL, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + }, + [BTTV_BOARD_SSAI_SECURITY] = { + .name = "SSAI Security Video Interface", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(0, 1, 2, 3), + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_SSAI_ULTRASOUND] = { + .name = "SSAI Ultrasound Video Interface", + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .muxsel = MUXSEL(2, 0, 1, 3), + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + /* ---- card 0x94---------------------------------- */ + [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { + .name = "DViCO FusionHDTV 2", + .tuner_type = TUNER_PHILIPS_FCV1236D, + .tuner_addr = ADDR_UNSET, + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1), + .gpiomask = 0x00e00007, + .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, + .gpiomute = 0x00c00007, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + /* ---- card 0x95---------------------------------- */ + [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { + .name = "Typhoon TV-Tuner PCI (50684)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3014f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20001,0x10001, 0, 0 }, + .gpiomute = 10, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GEOVISION_GV600] = { + /* emhn@usb.ve */ + .name = "Geovision GV-600", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x0, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), + .muxsel_hook = geovision_muxsel, + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_KOZUMI_KTV_01C] = { + /* Mauro Lacy + * Based on MagicTV and Conceptronic CONTVFMi */ + + .name = "Kozumi KTV-01C", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ + .gpiomute = 3, /* CONTVFMi */ + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + }, + [BTTV_BOARD_ENLTV_FM_2] = { + /* Encore TV Tuner Pro ENL TV-FM-2 + Mauro Carvalho Chehab IR disabled + bit 18/17 = 00 -> mute + 01 -> enable external audio input + 10 -> internal audio input (mono?) + 11 -> internal audio input + */ + .gpiomask = 0x060040, + .muxsel = MUXSEL(2, 3, 3), + .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, + .gpiomute = 0, + .tuner_type = TUNER_TCL_MF02GIP_5N, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + }, + [BTTV_BOARD_VD012] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012 (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x00, + .muxsel = MUXSEL(0, 2, 3, 1), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD012_X1] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012-X1 (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = MUXSEL(2, 3, 1), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD012_X2] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012-X2 (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = MUXSEL(3, 2, 1), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GEOVISION_GV800S] = { + /* Bruno Christo + * + * GeoVision GV-800(S) has 4 Conexant Fusion 878A: + * 1 audio input per BT878A = 4 audio inputs + * 4 video inputs per BT878A = 16 video inputs + * This is the first BT878A chip of the GV-800(S). It's the + * "master" chip and it controls the video inputs through an + * analog multiplexer (a CD22M3494) via some GPIO pins. The + * slaves should use card type 0x9e (following this one). + * There is a EEPROM on the card which is currently not handled. + * The audio input is not working yet. + */ + .name = "Geovision GV-800(S) (master)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0xf107f, + .no_gpioirq = 1, + .muxsel = MUXSEL(2, 2, 2, 2), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel_hook = gv800s_muxsel, + }, + [BTTV_BOARD_GEOVISION_GV800S_SL] = { + /* Bruno Christo + * + * GeoVision GV-800(S) has 4 Conexant Fusion 878A: + * 1 audio input per BT878A = 4 audio inputs + * 4 video inputs per BT878A = 16 video inputs + * The 3 other BT878A chips are "slave" chips of the GV-800(S) + * and should use this card type. + * The audio input is not working yet. + */ + .name = "Geovision GV-800(S) (slave)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0x00, + .no_gpioirq = 1, + .muxsel = MUXSEL(2, 2, 2, 2), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel_hook = gv800s_muxsel, + }, + [BTTV_BOARD_PV183] = { + .name = "ProVideo PV183", /* 0x9f */ + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TVT_TD3116] = { + .name = "Tongwei Video Technology TD-3116", + .video_inputs = 16, + .gpiomask = 0xc00ff, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), + .muxsel_hook = td3116_muxsel, + .svhs = NO_SVHS, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + }, + [BTTV_BOARD_APOSONIC_WDVR] = { + .name = "Aposonic W-DVR", + .video_inputs = 4, + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = TUNER_ABSENT, + }, + +}; + +static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); + +/* ----------------------------------------------------------------------- */ + +static unsigned char eeprom_data[256]; + +/* + * identify card + */ +void bttv_idcard(struct bttv *btv) +{ + unsigned int gpiobits; + int i,type; + + /* read PCI subsystem ID */ + btv->cardid = btv->c.pci->subsystem_device << 16; + btv->cardid |= btv->c.pci->subsystem_vendor; + + if (0 != btv->cardid && 0xffffffff != btv->cardid) { + /* look for the card */ + for (type = -1, i = 0; cards[i].id != 0; i++) + if (cards[i].id == btv->cardid) + type = i; + + if (type != -1) { + /* found it */ + pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n", + btv->c.nr, cards[type].name, cards[type].cardnr, + btv->cardid & 0xffff, + (btv->cardid >> 16) & 0xffff); + btv->c.type = cards[type].cardnr; + } else { + /* 404 */ + pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n", + btv->c.nr, btv->cardid & 0xffff, + (btv->cardid >> 16) & 0xffff); + pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n"); + } + } + + /* let the user override the autodetected type */ + if (card[btv->c.nr] < bttv_num_tvcards) + btv->c.type=card[btv->c.nr]; + + /* print which card config we are using */ + pr_info("%d: using: %s [card=%d,%s]\n", + btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type, + card[btv->c.nr] < bttv_num_tvcards + ? "insmod option" : "autodetected"); + + /* overwrite gpio stuff ?? */ + if (UNSET == audioall && UNSET == audiomux[0]) + return; + + if (UNSET != audiomux[0]) { + gpiobits = 0; + for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { + bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; + gpiobits |= audiomux[i]; + } + } else { + gpiobits = audioall; + for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { + bttv_tvcards[btv->c.type].gpiomux[i] = audioall; + } + } + bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; + pr_info("%d: gpio config override: mask=0x%x, mux=", + btv->c.nr, bttv_tvcards[btv->c.type].gpiomask); + for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { + pr_cont("%s0x%x", + i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); + } + pr_cont("\n"); +} + +/* + * (most) board specific initialisations goes here + */ + +/* Some Modular Technology cards have an eeprom, but no subsystem ID */ +static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) +{ + int type = -1; + + if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) + type = BTTV_BOARD_MODTEC_205; + else if (0 == strncmp(eeprom_data+20,"Picolo",7)) + type = BTTV_BOARD_EURESYS_PICOLO; + else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) + type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ + + if (-1 != type) { + btv->c.type = type; + pr_info("%d: detected by eeprom: %s [card=%d]\n", + btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); + } +} + +static void flyvideo_gpio(struct bttv *btv) +{ + int gpio, has_remote, has_radio, is_capture_only; + int is_lr90, has_tda9820_tda9821; + int tuner_type = UNSET, ttype; + + gpio_inout(0xffffff, 0); + udelay(8); /* without this we would see the 0x1800 mask */ + gpio = gpio_read(); + /* FIXME: must restore OUR_EN ??? */ + + /* all cards provide GPIO info, some have an additional eeprom + * LR50: GPIO coding can be found lower right CP1 .. CP9 + * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. + * GPIO14-12: n.c. + * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) + + * lowest 3 bytes are remote control codes (no handshake needed) + * xxxFFF: No remote control chip soldered + * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered + * Note: Some bits are Audio_Mask ! + */ + ttype = (gpio & 0x0f0000) >> 16; + switch (ttype) { + case 0x0: + tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ + break; + case 0x2: + tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ + break; + case 0x4: + tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ + break; + case 0x6: + tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ + break; + case 0xC: + tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ + break; + default: + pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr); + break; + } + + has_remote = gpio & 0x800000; + has_radio = gpio & 0x400000; + /* unknown 0x200000; + * unknown2 0x100000; */ + is_capture_only = !(gpio & 0x008000); /* GPIO15 */ + has_tda9820_tda9821 = !(gpio & 0x004000); + is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ + /* + * gpio & 0x001000 output bit for audio routing */ + + if (is_capture_only) + tuner_type = TUNER_ABSENT; /* No tuner present */ + + pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", + btv->c.nr, has_radio ? "yes" : "no", + has_remote ? "yes" : "no", tuner_type, gpio); + pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", + btv->c.nr, is_lr90 ? "yes" : "no", + has_tda9820_tda9821 ? "yes" : "no", + is_capture_only ? "yes" : "no"); + + if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ + btv->tuner_type = tuner_type; + btv->has_radio = has_radio; + + /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 + * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 + * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ + if (has_tda9820_tda9821) + btv->audio_mode_gpio = lt9415_audio; + /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ +} + +static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, + 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; +static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, + 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; + +static void miro_pinnacle_gpio(struct bttv *btv) +{ + int id,msp,gpio; + char *info; + + gpio_inout(0xffffff, 0); + gpio = gpio_read(); + id = ((gpio>>10) & 63) -1; + msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); + if (id < 32) { + btv->tuner_type = miro_tunermap[id]; + if (0 == (gpio & 0x20)) { + btv->has_radio = 1; + if (!miro_fmtuner[id]) { + btv->has_matchbox = 1; + btv->mbox_we = (1<<6); + btv->mbox_most = (1<<7); + btv->mbox_clk = (1<<8); + btv->mbox_data = (1<<9); + btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9); + } + } else { + btv->has_radio = 0; + } + if (-1 != msp) { + if (btv->c.type == BTTV_BOARD_MIRO) + btv->c.type = BTTV_BOARD_MIROPRO; + if (btv->c.type == BTTV_BOARD_PINNACLE) + btv->c.type = BTTV_BOARD_PINNACLEPRO; + } + pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", + btv->c.nr, id+1, btv->tuner_type, + !btv->has_radio ? "no" : + (btv->has_matchbox ? "matchbox" : "fmtuner"), + (-1 == msp) ? "no" : "yes"); + } else { + /* new cards with microtune tuner */ + id = 63 - id; + btv->has_radio = 0; + switch (id) { + case 1: + info = "PAL / mono"; + btv->tda9887_conf = TDA9887_INTERCARRIER; + break; + case 2: + info = "PAL+SECAM / stereo"; + btv->has_radio = 1; + btv->tda9887_conf = TDA9887_QSS; + break; + case 3: + info = "NTSC / stereo"; + btv->has_radio = 1; + btv->tda9887_conf = TDA9887_QSS; + break; + case 4: + info = "PAL+SECAM / mono"; + btv->tda9887_conf = TDA9887_QSS; + break; + case 5: + info = "NTSC / mono"; + btv->tda9887_conf = TDA9887_INTERCARRIER; + break; + case 6: + info = "NTSC / stereo"; + btv->tda9887_conf = TDA9887_INTERCARRIER; + break; + case 7: + info = "PAL / stereo"; + btv->tda9887_conf = TDA9887_INTERCARRIER; + break; + default: + info = "oops: unknown card"; + break; + } + if (-1 != msp) + btv->c.type = BTTV_BOARD_PINNACLEPRO; + pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", + btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); + btv->tuner_type = TUNER_MT2032; + } +} + +/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ +#define LM1882_SYNC_DRIVE 0x200000L + +static void init_ids_eagle(struct bttv *btv) +{ + gpio_inout(0xffffff,0xFFFF37); + gpio_write(0x200020); + + /* flash strobe inverter ?! */ + gpio_write(0x200024); + + /* switch sync drive off */ + gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); + + /* set BT848 muxel to 2 */ + btaor((2)<<5, ~(2<<5), BT848_IFORM); +} + +/* Muxsel helper for the IDS Eagle. + * the eagles does not use the standard muxsel-bits but + * has its own multiplexer */ +static void eagle_muxsel(struct bttv *btv, unsigned int input) +{ + gpio_bits(3, input & 3); + + /* composite */ + /* set chroma ADC to sleep */ + btor(BT848_ADC_C_SLEEP, BT848_ADC); + /* set to composite video */ + btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); + btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); + + /* switch sync drive off */ + gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); +} + +static void gvc1100_muxsel(struct bttv *btv, unsigned int input) +{ + static const int masks[] = {0x30, 0x01, 0x12, 0x23}; + gpio_write(masks[input%4]); +} + +/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and + alarms output + + GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | + + IN - sensor inputs, INx - sensor inputs and TI XORed together + O1,O2,O3 - alarm outputs (relays) + + OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 + +*/ + +static void init_lmlbt4x(struct bttv *btv) +{ + pr_debug("LMLBT4x init\n"); + btwrite(0x000000, BT848_GPIO_REG_INP); + gpio_inout(0xffffff, 0x0006C0); + gpio_write(0x000000); +} + +static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int inmux = input % 8; + gpio_inout( 0xf, 0xf ); + gpio_bits( 0xf, inmux ); +} + +static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int inmux = input % 4; + gpio_inout( 3<<9, 3<<9 ); + gpio_bits( 3<<9, inmux<<9 ); +} + +static void geovision_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int inmux = input % 16; + gpio_inout(0xf, 0xf); + gpio_bits(0xf, inmux); +} + +/* + * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. + * The first 74HC4051 has the lower 8 inputs, the second one the higher 8. + * The muxes are controlled via a 74HC373 latch which is connected to + * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. + * Q0 of the latch is connected to the Enable (~E) input of the first + * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. + * Q4 - Q7 are connected to the second 74HC4051 in the same way. + */ + +static void td3116_latch_value(struct bttv *btv, u32 value) +{ + gpio_bits((1<<18) | 0xff, value); + gpio_bits((1<<18) | 0xff, (1<<18) | value); + udelay(1); + gpio_bits((1<<18) | 0xff, value); +} + +static void td3116_muxsel(struct bttv *btv, unsigned int input) +{ + u32 value; + u32 highbit; + + highbit = (input & 0x8) >> 3 ; + + /* Disable outputs and set value in the mux */ + value = 0x11; /* Disable outputs */ + value |= ((input & 0x7) << 1) << (4 * highbit); + td3116_latch_value(btv, value); + + /* Enable the correct output */ + value &= ~0x11; + value |= ((highbit ^ 0x1) << 4) | highbit; + td3116_latch_value(btv, value); +} + +/* ----------------------------------------------------------------------- */ + +static void bttv_reset_audio(struct bttv *btv) +{ + /* + * BT878A has a audio-reset register. + * 1. This register is an audio reset function but it is in + * function-0 (video capture) address space. + * 2. It is enough to do this once per power-up of the card. + * 3. There is a typo in the Conexant doc -- it is not at + * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). + * --//Shrikumar 030609 + */ + if (btv->id != 878) + return; + + if (bttv_debug) + pr_debug("%d: BT878A ARESET\n", btv->c.nr); + btwrite((1<<7), 0x058); + udelay(10); + btwrite( 0, 0x058); +} + +/* initialization part one -- before registering i2c bus */ +void bttv_init_card1(struct bttv *btv) +{ + switch (btv->c.type) { + case BTTV_BOARD_HAUPPAUGE: + case BTTV_BOARD_HAUPPAUGE878: + boot_msp34xx(btv,5); + break; + case BTTV_BOARD_VOODOOTV_200: + case BTTV_BOARD_VOODOOTV_FM: + boot_msp34xx(btv,20); + break; + case BTTV_BOARD_AVERMEDIA98: + boot_msp34xx(btv,11); + break; + case BTTV_BOARD_HAUPPAUGEPVR: + pvr_boot(btv); + break; + case BTTV_BOARD_TWINHAN_DST: + case BTTV_BOARD_AVDVBT_771: + case BTTV_BOARD_PINNACLESAT: + btv->use_i2c_hw = 1; + break; + case BTTV_BOARD_ADLINK_RTV24: + init_RTV24( btv ); + break; + + } + if (!bttv_tvcards[btv->c.type].has_dvb) + bttv_reset_audio(btv); +} + +/* initialization part two -- after registering i2c bus */ +void bttv_init_card2(struct bttv *btv) +{ + btv->tuner_type = UNSET; + + if (BTTV_BOARD_UNKNOWN == btv->c.type) { + bttv_readee(btv,eeprom_data,0xa0); + identify_by_eeprom(btv,eeprom_data); + } + + switch (btv->c.type) { + case BTTV_BOARD_MIRO: + case BTTV_BOARD_MIROPRO: + case BTTV_BOARD_PINNACLE: + case BTTV_BOARD_PINNACLEPRO: + /* miro/pinnacle */ + miro_pinnacle_gpio(btv); + break; + case BTTV_BOARD_FLYVIDEO_98: + case BTTV_BOARD_MAXI: + case BTTV_BOARD_LIFE_FLYKIT: + case BTTV_BOARD_FLYVIDEO: + case BTTV_BOARD_TYPHOON_TVIEW: + case BTTV_BOARD_CHRONOS_VS2: + case BTTV_BOARD_FLYVIDEO_98FM: + case BTTV_BOARD_FLYVIDEO2000: + case BTTV_BOARD_FLYVIDEO98EZ: + case BTTV_BOARD_CONFERENCETV: + case BTTV_BOARD_LIFETEC_9415: + flyvideo_gpio(btv); + break; + case BTTV_BOARD_HAUPPAUGE: + case BTTV_BOARD_HAUPPAUGE878: + case BTTV_BOARD_HAUPPAUGEPVR: + /* pick up some config infos from the eeprom */ + bttv_readee(btv,eeprom_data,0xa0); + hauppauge_eeprom(btv); + break; + case BTTV_BOARD_AVERMEDIA98: + case BTTV_BOARD_AVPHONE98: + bttv_readee(btv,eeprom_data,0xa0); + avermedia_eeprom(btv); + break; + case BTTV_BOARD_PXC200: + init_PXC200(btv); + break; + case BTTV_BOARD_PICOLO_TETRA_CHIP: + picolo_tetra_init(btv); + break; + case BTTV_BOARD_VHX: + btv->has_radio = 1; + btv->has_matchbox = 1; + btv->mbox_we = 0x20; + btv->mbox_most = 0; + btv->mbox_clk = 0x08; + btv->mbox_data = 0x10; + btv->mbox_mask = 0x38; + break; + case BTTV_BOARD_VOBIS_BOOSTAR: + case BTTV_BOARD_TERRATV: + terratec_active_radio_upgrade(btv); + break; + case BTTV_BOARD_MAGICTVIEW061: + if (btv->cardid == 0x3002144f) { + btv->has_radio=1; + pr_info("%d: radio detected by subsystem id (CPH05x)\n", + btv->c.nr); + } + break; + case BTTV_BOARD_STB2: + if (btv->cardid == 0x3060121a) { + /* Fix up entry for 3DFX VoodooTV 100, + which is an OEM STB card variant. */ + btv->has_radio=0; + btv->tuner_type=TUNER_TEMIC_NTSC; + } + break; + case BTTV_BOARD_OSPREY1x0: + case BTTV_BOARD_OSPREY1x0_848: + case BTTV_BOARD_OSPREY101_848: + case BTTV_BOARD_OSPREY1x1: + case BTTV_BOARD_OSPREY1x1_SVID: + case BTTV_BOARD_OSPREY2xx: + case BTTV_BOARD_OSPREY2x0_SVID: + case BTTV_BOARD_OSPREY2x0: + case BTTV_BOARD_OSPREY440: + case BTTV_BOARD_OSPREY500: + case BTTV_BOARD_OSPREY540: + case BTTV_BOARD_OSPREY2000: + bttv_readee(btv,eeprom_data,0xa0); + osprey_eeprom(btv, eeprom_data); + break; + case BTTV_BOARD_IDS_EAGLE: + init_ids_eagle(btv); + break; + case BTTV_BOARD_MODTEC_205: + bttv_readee(btv,eeprom_data,0xa0); + modtec_eeprom(btv); + break; + case BTTV_BOARD_LMLBT4: + init_lmlbt4x(btv); + break; + case BTTV_BOARD_TIBET_CS16: + tibetCS16_init(btv); + break; + case BTTV_BOARD_KODICOM_4400R: + kodicom4400r_init(btv); + break; + case BTTV_BOARD_GEOVISION_GV800S: + gv800s_init(btv); + break; + } + + /* pll configuration */ + if (!(btv->id==848 && btv->revision==0x11)) { + /* defaults from card list */ + if (PLL_28 == bttv_tvcards[btv->c.type].pll) { + btv->pll.pll_ifreq=28636363; + btv->pll.pll_crystal=BT848_IFORM_XT0; + } + if (PLL_35 == bttv_tvcards[btv->c.type].pll) { + btv->pll.pll_ifreq=35468950; + btv->pll.pll_crystal=BT848_IFORM_XT1; + } + /* insmod options can override */ + switch (pll[btv->c.nr]) { + case 0: /* none */ + btv->pll.pll_crystal = 0; + btv->pll.pll_ifreq = 0; + btv->pll.pll_ofreq = 0; + break; + case 1: /* 28 MHz */ + case 28: + btv->pll.pll_ifreq = 28636363; + btv->pll.pll_ofreq = 0; + btv->pll.pll_crystal = BT848_IFORM_XT0; + break; + case 2: /* 35 MHz */ + case 35: + btv->pll.pll_ifreq = 35468950; + btv->pll.pll_ofreq = 0; + btv->pll.pll_crystal = BT848_IFORM_XT1; + break; + } + } + btv->pll.pll_current = -1; + + /* tuner configuration (from card list / autodetect / insmod option) */ + if (UNSET != bttv_tvcards[btv->c.type].tuner_type) + if (UNSET == btv->tuner_type) + btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; + if (UNSET != tuner[btv->c.nr]) + btv->tuner_type = tuner[btv->c.nr]; + + if (btv->tuner_type == TUNER_ABSENT) + pr_info("%d: tuner absent\n", btv->c.nr); + else if (btv->tuner_type == UNSET) + pr_warn("%d: tuner type unset\n", btv->c.nr); + else + pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type); + + if (autoload != UNSET) { + pr_warn("%d: the autoload option is obsolete\n", btv->c.nr); + pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n", + btv->c.nr); + } + + if (UNSET == btv->tuner_type) + btv->tuner_type = TUNER_ABSENT; + + btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? + bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; + btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? + UNSET : bttv_tvcards[btv->c.type].svhs; + if (svhs[btv->c.nr] != UNSET) + btv->svhs = svhs[btv->c.nr]; + if (remote[btv->c.nr] != UNSET) + btv->has_remote = remote[btv->c.nr]; + + if (bttv_tvcards[btv->c.type].has_radio) + btv->has_radio = 1; + if (bttv_tvcards[btv->c.type].has_remote) + btv->has_remote = 1; + if (!bttv_tvcards[btv->c.type].no_gpioirq) + btv->gpioirq = 1; + if (bttv_tvcards[btv->c.type].volume_gpio) + btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; + if (bttv_tvcards[btv->c.type].audio_mode_gpio) + btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; + + if (btv->tuner_type == TUNER_ABSENT) + return; /* no tuner or related drivers to load */ + + if (btv->has_saa6588 || saa6588[btv->c.nr]) { + /* Probe for RDS receiver chip */ + static const unsigned short addrs[] = { + 0x20 >> 1, + 0x22 >> 1, + I2C_CLIENT_END + }; + struct v4l2_subdev *sd; + + sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "saa6588", 0, addrs); + btv->has_saa6588 = (sd != NULL); + } + + /* try to detect audio/fader chips */ + + /* First check if the user specified the audio chip via a module + option. */ + + switch (audiodev[btv->c.nr]) { + case -1: + return; /* do not load any audio module */ + + case 0: /* autodetect */ + break; + + case 1: { + /* The user specified that we should probe for msp3400 */ + static const unsigned short addrs[] = { + I2C_ADDR_MSP3400 >> 1, + I2C_ADDR_MSP3400_ALT >> 1, + I2C_CLIENT_END + }; + + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "msp3400", 0, addrs); + if (btv->sd_msp34xx) + return; + goto no_audio; + } + + case 2: { + /* The user specified that we should probe for tda7432 */ + static const unsigned short addrs[] = { + I2C_ADDR_TDA7432 >> 1, + I2C_CLIENT_END + }; + + if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tda7432", 0, addrs)) + return; + goto no_audio; + } + + case 3: { + /* The user specified that we should probe for tvaudio */ + btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); + if (btv->sd_tvaudio) + return; + goto no_audio; + } + + default: + pr_warn("%d: unknown audiodev value!\n", btv->c.nr); + return; + } + + /* There were no overrides, so now we try to discover this through the + card definition */ + + /* probe for msp3400 first: this driver can detect whether or not + it really is a msp3400, so it will return NULL when the device + found is really something else (e.g. a tea6300). */ + if (!bttv_tvcards[btv->c.type].no_msp34xx) { + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "msp3400", + 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); + } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "msp3400", + 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); + } + + /* If we found a msp34xx, then we're done. */ + if (btv->sd_msp34xx) + return; + + /* Now see if we can find one of the tvaudio devices. */ + btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); + if (btv->sd_tvaudio) { + /* There may be two tvaudio chips on the card, so try to + find another. */ + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); + } + + /* it might also be a tda7432. */ + if (!bttv_tvcards[btv->c.type].no_tda7432) { + static const unsigned short addrs[] = { + I2C_ADDR_TDA7432 >> 1, + I2C_CLIENT_END + }; + + btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tda7432", 0, addrs); + if (btv->sd_tda7432) + return; + } + if (btv->sd_tvaudio) + return; + +no_audio: + pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr); +} + + +/* initialize the tuner */ +void bttv_init_tuner(struct bttv *btv) +{ + int addr = ADDR_UNSET; + + if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) + addr = bttv_tvcards[btv->c.type].tuner_addr; + + if (btv->tuner_type != TUNER_ABSENT) { + struct tuner_setup tun_setup; + + /* Load tuner module before issuing tuner config call! */ + if (btv->has_radio) + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); + + tun_setup.mode_mask = T_ANALOG_TV; + tun_setup.type = btv->tuner_type; + tun_setup.addr = addr; + + if (btv->has_radio) + tun_setup.mode_mask |= T_RADIO; + + bttv_call_all(btv, tuner, s_type_addr, &tun_setup); + } + + if (btv->tda9887_conf) { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &btv->tda9887_conf; + + bttv_call_all(btv, tuner, s_config, &tda9887_cfg); + } +} + +/* ----------------------------------------------------------------------- */ + +static void modtec_eeprom(struct bttv *btv) +{ + if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { + btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", + btv->c.nr, &eeprom_data[0x1e]); + } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { + btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", + btv->c.nr, &eeprom_data[0x1e]); + } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { + btv->tuner_type=TUNER_PHILIPS_NTSC; + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", + btv->c.nr, &eeprom_data[0x1e]); + } else { + pr_info("%d: Modtec: Unknown TunerString: %s\n", + btv->c.nr, &eeprom_data[0x1e]); + } +} + +static void hauppauge_eeprom(struct bttv *btv) +{ + struct tveeprom tv; + + tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data); + btv->tuner_type = tv.tuner_type; + btv->has_radio = tv.has_radio; + + pr_info("%d: Hauppauge eeprom indicates model#%d\n", + btv->c.nr, tv.model); + + /* + * Some of the 878 boards have duplicate PCI IDs. Switch the board + * type based on model #. + */ + if(tv.model == 64900) { + pr_info("%d: Switching board type from %s to %s\n", + btv->c.nr, + bttv_tvcards[btv->c.type].name, + bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); + btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; + } + + /* The 61334 needs the msp3410 to do the radio demod to get sound */ + if (tv.model == 61334) + btv->radio_uses_msp_demodulator = 1; +} + +static int terratec_active_radio_upgrade(struct bttv *btv) +{ + int freq; + + btv->has_radio = 1; + btv->has_matchbox = 1; + btv->mbox_we = 0x10; + btv->mbox_most = 0x20; + btv->mbox_clk = 0x08; + btv->mbox_data = 0x04; + btv->mbox_mask = 0x3c; + + btv->mbox_iow = 1 << 8; + btv->mbox_ior = 1 << 9; + btv->mbox_csel = 1 << 10; + + freq=88000/62.5; + tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */ + if (0x1ed8 == tea5757_read(btv)) { + pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr); + btv->has_radio = 1; + btv->has_saa6588 = 1; + btv->has_matchbox = 1; + } else { + btv->has_radio = 0; + btv->has_matchbox = 0; + } + return 0; +} + + +/* ----------------------------------------------------------------------- */ + +/* + * minimal bootstrap for the WinTV/PVR -- upload altera firmware. + * + * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have + * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be + * unpacked with unzip). + */ +#define PVR_GPIO_DELAY 10 + +#define BTTV_ALT_DATA 0x000001 +#define BTTV_ALT_DCLK 0x100000 +#define BTTV_ALT_NCONFIG 0x800000 + +static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen) +{ + u32 n; + u8 bits; + int i; + + gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); + gpio_write(0); + udelay(PVR_GPIO_DELAY); + + gpio_write(BTTV_ALT_NCONFIG); + udelay(PVR_GPIO_DELAY); + + for (n = 0; n < microlen; n++) { + bits = micro[n]; + for (i = 0 ; i < 8 ; i++) { + gpio_bits(BTTV_ALT_DCLK,0); + if (bits & 0x01) + gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); + else + gpio_bits(BTTV_ALT_DATA,0); + gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); + bits >>= 1; + } + } + gpio_bits(BTTV_ALT_DCLK,0); + udelay(PVR_GPIO_DELAY); + + /* begin Altera init loop (Not necessary,but doesn't hurt) */ + for (i = 0 ; i < 30 ; i++) { + gpio_bits(BTTV_ALT_DCLK,0); + gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); + } + gpio_bits(BTTV_ALT_DCLK,0); + return 0; +} + +static int pvr_boot(struct bttv *btv) +{ + const struct firmware *fw_entry; + int rc; + + rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); + if (rc != 0) { + pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); + return rc; + } + rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); + pr_info("%d: altera firmware upload %s\n", + btv->c.nr, (rc < 0) ? "failed" : "ok"); + release_firmware(fw_entry); + return rc; +} + +/* ----------------------------------------------------------------------- */ +/* some osprey specific stuff */ + +static void osprey_eeprom(struct bttv *btv, const u8 ee[256]) +{ + int i; + u32 serial = 0; + int cardid = -1; + + /* This code will nevery actually get called in this case.... */ + if (btv->c.type == BTTV_BOARD_UNKNOWN) { + /* this might be an antique... check for MMAC label in eeprom */ + if (!strncmp(ee, "MMAC", 4)) { + u8 checksum = 0; + for (i = 0; i < 21; i++) + checksum += ee[i]; + if (checksum != ee[21]) + return; + cardid = BTTV_BOARD_OSPREY1x0_848; + for (i = 12; i < 21; i++) + serial *= 10, serial += ee[i] - '0'; + } + } else { + unsigned short type; + + for (i = 4*16; i < 8*16; i += 16) { + u16 checksum = ip_compute_csum(ee + i, 16); + + if ((checksum&0xff) + (checksum>>8) == 0xff) + break; + } + if (i >= 8*16) + return; + ee += i; + + /* found a valid descriptor */ + type = get_unaligned_be16((__be16 *)(ee+4)); + + switch(type) { + /* 848 based */ + case 0x0004: + cardid = BTTV_BOARD_OSPREY1x0_848; + break; + case 0x0005: + cardid = BTTV_BOARD_OSPREY101_848; + break; + + /* 878 based */ + case 0x0012: + case 0x0013: + cardid = BTTV_BOARD_OSPREY1x0; + break; + case 0x0014: + case 0x0015: + cardid = BTTV_BOARD_OSPREY1x1; + break; + case 0x0016: + case 0x0017: + case 0x0020: + cardid = BTTV_BOARD_OSPREY1x1_SVID; + break; + case 0x0018: + case 0x0019: + case 0x001E: + case 0x001F: + cardid = BTTV_BOARD_OSPREY2xx; + break; + case 0x001A: + case 0x001B: + cardid = BTTV_BOARD_OSPREY2x0_SVID; + break; + case 0x0040: + cardid = BTTV_BOARD_OSPREY500; + break; + case 0x0050: + case 0x0056: + cardid = BTTV_BOARD_OSPREY540; + /* bttv_osprey_540_init(btv); */ + break; + case 0x0060: + case 0x0070: + case 0x00A0: + cardid = BTTV_BOARD_OSPREY2x0; + /* enable output on select control lines */ + gpio_inout(0xffffff,0x000303); + break; + case 0x00D8: + cardid = BTTV_BOARD_OSPREY440; + break; + default: + /* unknown...leave generic, but get serial # */ + pr_info("%d: osprey eeprom: unknown card type 0x%04x\n", + btv->c.nr, type); + break; + } + serial = get_unaligned_be32((__be32 *)(ee+6)); + } + + pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n", + btv->c.nr, cardid, + cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial); + + if (cardid<0 || btv->c.type == cardid) + return; + + /* card type isn't set correctly */ + if (card[btv->c.nr] < bttv_num_tvcards) { + pr_warn("%d: osprey eeprom: Not overriding user specified card type\n", + btv->c.nr); + } else { + pr_info("%d: osprey eeprom: Changing card type from %d to %d\n", + btv->c.nr, btv->c.type, cardid); + btv->c.type = cardid; + } +} + +/* ----------------------------------------------------------------------- */ +/* AVermedia specific stuff, from bktr_card.c */ + +static int tuner_0_table[] = { + TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, + TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, + TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, + TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, + TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, + TUNER_PHILIPS_FM1216ME_MK3 }; + +static int tuner_1_table[] = { + TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, + TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, + TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, + TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ + TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; + +static void avermedia_eeprom(struct bttv *btv) +{ + int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; + + tuner_make = (eeprom_data[0x41] & 0x7); + tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; + tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; + btv->has_remote = (eeprom_data[0x42] & 0x01); + + if (tuner_make == 0 || tuner_make == 2) + if (tuner_format <= 0x0a) + tuner_type = tuner_0_table[tuner_format]; + if (tuner_make == 1) + if (tuner_format <= 9) + tuner_type = tuner_1_table[tuner_format]; + + if (tuner_make == 4) + if (tuner_format == 0x09) + tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ + + pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=", + btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); + if (tuner_type) { + btv->tuner_type = tuner_type; + pr_cont("%d", tuner_type); + } else + pr_cont("Unknown type"); + pr_cont(" radio:%s remote control:%s\n", + tuner_tv_fm ? "yes" : "no", + btv->has_remote ? "yes" : "no"); +} + +/* + * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 + * analog demod, which is not I2C controlled like the newer and more common + * TDA9887 series. Instead is has two tri-state input pins, S0 and S1, + * that control the IF for the video and audio. Apparently, bttv GPIO + * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I + * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). + */ +u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits) +{ + + if (btv->audio_input == TVAUDIO_INPUT_TUNER) { + if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN) + gpiobits |= 0x10000; + else + gpiobits &= ~0x10000; + } + + gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits); + return gpiobits; +} + + +/* + * reset/enable the MSP on some Hauppauge cards + * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! + * + * Hauppauge: pin 5 + * Voodoo: pin 20 + */ +static void boot_msp34xx(struct bttv *btv, int pin) +{ + int mask = (1 << pin); + + gpio_inout(mask,mask); + gpio_bits(mask,0); + mdelay(2); + udelay(500); + gpio_bits(mask,mask); + + if (bttv_gpio) + bttv_gpio_tracking(btv,"msp34xx"); + if (bttv_verbose) + pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n", + btv->c.nr, pin); +} + +/* ----------------------------------------------------------------------- */ +/* Imagenation L-Model PXC200 Framegrabber */ +/* This is basically the same procedure as + * used by Alessandro Rubini in his pxc200 + * driver, but using BTTV functions */ + +static void init_PXC200(struct bttv *btv) +{ + static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, + 0x03, 0x04, 0x05, 0x06, 0x00 }; + unsigned int i; + int tmp; + u32 val; + + /* Initialise GPIO-connevted stuff */ + gpio_inout(0xffffff, (1<<13)); + gpio_write(0); + udelay(3); + gpio_write(1<<13); + /* GPIO inputs are pulled up, so no need to drive + * reset pin any longer */ + gpio_bits(0xffffff, 0); + if (bttv_gpio) + bttv_gpio_tracking(btv,"pxc200"); + + /* we could/should try and reset/control the AD pots? but + right now we simply turned off the crushing. Without + this the AGC drifts drifts + remember the EN is reverse logic --> + setting BT848_ADC_AGC_EN disable the AGC + tboult@eecs.lehigh.edu + */ + + btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); + + /* Initialise MAX517 DAC */ + pr_info("Setting DAC reference voltage level ...\n"); + bttv_I2CWrite(btv,0x5E,0,0x80,1); + + /* Initialise 12C508 PIC */ + /* The I2CWrite and I2CRead commmands are actually to the + * same chips - but the R/W bit is included in the address + * argument so the numbers are different */ + + + pr_info("Initialising 12C508 PIC chip ...\n"); + + /* First of all, enable the clock line. This is used in the PXC200-F */ + val = btread(BT848_GPIO_DMA_CTL); + val |= BT848_GPIO_DMA_CTL_GPCLKMODE; + btwrite(val, BT848_GPIO_DMA_CTL); + + /* Then, push to 0 the reset pin long enough to reset the * + * device same as above for the reset line, but not the same + * value sent to the GPIO-connected stuff + * which one is the good one? */ + gpio_inout(0xffffff,(1<<2)); + gpio_write(0); + udelay(10); + gpio_write(1<<2); + + for (i = 0; i < ARRAY_SIZE(vals); i++) { + tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); + if (tmp != -1) { + pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", + vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); + } + } + + pr_info("PXC200 Initialised\n"); +} + + + +/* ----------------------------------------------------------------------- */ +/* + * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock + * it. This apparently involves the following procedure for each 878 chip: + * + * 1) write 0x00C3FEFF to the GPIO_OUT_EN register + * + * 2) write to GPIO_DATA + * - 0x0E + * - sleep 1ms + * - 0x10 + 0x0E + * - sleep 10ms + * - 0x0E + * read from GPIO_DATA into buf (uint_32) + * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) + * error. ERROR_CPLD_Check_Failed stop. + * + * 3) write to GPIO_DATA + * - write 0x4400 + 0x0E + * - sleep 10ms + * - write 0x4410 + 0x0E + * - sleep 1ms + * - write 0x0E + * read from GPIO_DATA into buf (uint_32) + * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) + * error. ERROR_CPLD_Check_Failed. + */ +/* ----------------------------------------------------------------------- */ +static void +init_RTV24 (struct bttv *btv) +{ + uint32_t dataRead = 0; + long watchdog_value = 0x0E; + + pr_info("%d: Adlink RTV-24 initialisation in progress ...\n", + btv->c.nr); + + btwrite (0x00c3feff, BT848_GPIO_OUT_EN); + + btwrite (0 + watchdog_value, BT848_GPIO_DATA); + msleep (1); + btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); + msleep (10); + btwrite (0 + watchdog_value, BT848_GPIO_DATA); + + dataRead = btread (BT848_GPIO_DATA); + + if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { + pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", + btv->c.nr, dataRead); + } + + btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); + msleep (10); + btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); + msleep (1); + btwrite (watchdog_value, BT848_GPIO_DATA); + msleep (1); + dataRead = btread (BT848_GPIO_DATA); + + if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { + pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", + btv->c.nr, dataRead); + + return; + } + + pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr); +} + + + +/* ----------------------------------------------------------------------- */ +/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */ +/* + * Copyright (c) 1999 Csaba Halasz + * This code is placed under the terms of the GNU General Public License + * + * Brutally hacked by Dan Sheridan djs52 8/3/00 + */ + +static void bus_low(struct bttv *btv, int bit) +{ + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + } + + gpio_bits(bit,0); + udelay(5); + + if (btv->mbox_ior) { + gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); + udelay(5); + } +} + +static void bus_high(struct bttv *btv, int bit) +{ + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + } + + gpio_bits(bit,bit); + udelay(5); + + if (btv->mbox_ior) { + gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); + udelay(5); + } +} + +static int bus_in(struct bttv *btv, int bit) +{ + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + + gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); + udelay(5); + } + return gpio_read() & (bit); +} + +/* TEA5757 register bits */ +#define TEA_FREQ 0:14 +#define TEA_BUFFER 15:15 + +#define TEA_SIGNAL_STRENGTH 16:17 + +#define TEA_PORT1 18:18 +#define TEA_PORT0 19:19 + +#define TEA_BAND 20:21 +#define TEA_BAND_FM 0 +#define TEA_BAND_MW 1 +#define TEA_BAND_LW 2 +#define TEA_BAND_SW 3 + +#define TEA_MONO 22:22 +#define TEA_ALLOW_STEREO 0 +#define TEA_FORCE_MONO 1 + +#define TEA_SEARCH_DIRECTION 23:23 +#define TEA_SEARCH_DOWN 0 +#define TEA_SEARCH_UP 1 + +#define TEA_STATUS 24:24 +#define TEA_STATUS_TUNED 0 +#define TEA_STATUS_SEARCHING 1 + +/* Low-level stuff */ +static int tea5757_read(struct bttv *btv) +{ + unsigned long timeout; + int value = 0; + int i; + + /* better safe than sorry */ + gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we); + + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + } + + if (bttv_gpio) + bttv_gpio_tracking(btv,"tea5757 read"); + + bus_low(btv,btv->mbox_we); + bus_low(btv,btv->mbox_clk); + + udelay(10); + timeout= jiffies + msecs_to_jiffies(1000); + + /* wait for DATA line to go low; error if it doesn't */ + while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout)) + schedule(); + if (bus_in(btv,btv->mbox_data)) { + pr_warn("%d: tea5757: read timeout\n", btv->c.nr); + return -1; + } + + dprintk("%d: tea5757:", btv->c.nr); + for (i = 0; i < 24; i++) { + udelay(5); + bus_high(btv,btv->mbox_clk); + udelay(5); + dprintk_cont("%c", + bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-'); + bus_low(btv,btv->mbox_clk); + value <<= 1; + value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */ + dprintk_cont("%c", + bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M'); + } + dprintk_cont("\n"); + dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value); + return value; +} + +static int tea5757_write(struct bttv *btv, int value) +{ + int i; + int reg = value; + + gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data); + + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + } + if (bttv_gpio) + bttv_gpio_tracking(btv,"tea5757 write"); + + dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value); + bus_low(btv,btv->mbox_clk); + bus_high(btv,btv->mbox_we); + for (i = 0; i < 25; i++) { + if (reg & 0x1000000) + bus_high(btv,btv->mbox_data); + else + bus_low(btv,btv->mbox_data); + reg <<= 1; + bus_high(btv,btv->mbox_clk); + udelay(10); + bus_low(btv,btv->mbox_clk); + udelay(10); + } + bus_low(btv,btv->mbox_we); /* unmute !!! */ + return 0; +} + +void tea5757_set_freq(struct bttv *btv, unsigned short freq) +{ + dprintk("tea5757_set_freq %d\n",freq); + tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */ +} + +/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] + * + * This is needed because rv605 don't use a normal multiplex, but a crosspoint + * switch instead (CD22M3494E). This IC can have multiple active connections + * between Xn (input) and Yn (output) pins. We need to clear any existing + * connection prior to establish a new one, pulsing the STROBE pin. + * + * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. + * GPIO pins are wired as: + * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) + * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) + * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) + * GPIO[8] - - P3[5] (microcontroller) + * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) + * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) + * GPINTR - - P3[4] (microcontroller) + * + * The microcontroller is a 80C32 like. It should be possible to change xpoint + * configuration either directly (as we are doing) or using the microcontroller + * which is also wired to I2C interface. I have no further info on the + * microcontroller features, one would need to disassembly the firmware. + * note: the vendor refused to give any information on this product, all + * that stuff was found using a multimeter! :) + */ +static void rv605_muxsel(struct bttv *btv, unsigned int input) +{ + static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0, + 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa }; + + gpio_bits(0x07f, muxgpio[input]); + + /* reset all conections */ + gpio_bits(0x200,0x200); + mdelay(1); + gpio_bits(0x200,0x000); + mdelay(1); + + /* create a new connection */ + gpio_bits(0x480,0x480); + mdelay(1); + gpio_bits(0x480,0x080); + mdelay(1); +} + +/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] + * + * The CS16 (available on eBay cheap) is a PCI board with four Fusion + * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator + * chips, ten eight input analog multiplexors, a not chip and a few + * other components. + * + * 16 inputs on a secondary bracket are provided and can be selected + * from each of the four capture chips. Two of the eight input + * multiplexors are used to select from any of the 16 input signals. + * + * Unsupported hardware capabilities: + * . A video output monitor on the secondary bracket can be selected from + * one of the 878A chips. + * . Another passthrough but I haven't spent any time investigating it. + * . Digital I/O (logic level connected to GPIO) is available from an + * onboard header. + * + * The on chip input mux should always be set to 2. + * GPIO[16:19] - Video input selection + * GPIO[0:3] - Video output monitor select (only available from one 878A) + * GPIO[?:?] - Digital I/O. + * + * There is an ATMEL microcontroller with an 8031 core on board. I have not + * determined what function (if any) it provides. With the microcontroller + * and sync separator chips a guess is that it might have to do with video + * switching and maybe some digital I/O. + */ +static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) +{ + /* video mux */ + gpio_bits(0x0f0000, input << 16); +} + +static void tibetCS16_init(struct bttv *btv) +{ + /* enable gpio bits, mask obtained via btSpy */ + gpio_inout(0xffffff, 0x0f7fff); + gpio_write(0x0f7fff); +} + +/* + * The following routines for the Kodicom-4400r get a little mind-twisting. + * There is a "master" controller and three "slave" controllers, together + * an analog switch which connects any of 16 cameras to any of the BT87A's. + * The analog switch is controlled by the "master", but the detection order + * of the four BT878A chips is in an order which I just don't understand. + * The "master" is actually the second controller to be detected. The + * logic on the board uses logical numbers for the 4 controllers, but + * those numbers are different from the detection sequence. When working + * with the analog switch, we need to "map" from the detection sequence + * over to the board's logical controller number. This mapping sequence + * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical + * unit 3, the second (which is the master) is logical unit 0, etc. + * We need to maintain the status of the analog switch (which of the 16 + * cameras is connected to which of the 4 controllers). Rather than + * add to the bttv structure for this, we use the data reserved for + * the mbox (unused for this card type). + */ + +/* + * First a routine to set the analog switch, which controls which camera + * is routed to which controller. The switch comprises an X-address + * (gpio bits 0-3, representing the camera, ranging from 0-15), and a + * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). + * A data value (gpio bit 7) of '1' enables the switch, and '0' disables + * the switch. A STROBE bit (gpio bit 8) latches the data value into the + * specified address. The idea is to set the address and data, then bring + * STROBE high, and finally bring STROBE back to low. + */ +static void kodicom4400r_write(struct bttv *btv, + unsigned char xaddr, + unsigned char yaddr, + unsigned char data) { + unsigned int udata; + + udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); + gpio_bits(0x1ff, udata); /* write ADDR and DAT */ + gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ + gpio_bits(0x1ff, udata); /* strobe low */ +} + +/* + * Next the mux select. Both the "master" and "slave" 'cards' (controllers) + * use this routine. The routine finds the "master" for the card, maps + * the controller number from the detected position over to the logical + * number, writes the appropriate data to the analog switch, and housekeeps + * the local copy of the switch information. The parameter 'input' is the + * requested camera number (0 - 15). + */ +static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) +{ + char *sw_status; + int xaddr, yaddr; + struct bttv *mctlr; + static unsigned char map[4] = {3, 0, 2, 1}; + + mctlr = master[btv->c.nr]; + if (mctlr == NULL) { /* ignore if master not yet detected */ + return; + } + yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ + yaddr = map[yaddr]; + sw_status = (char *)(&mctlr->mbox_we); + xaddr = input & 0xf; + /* Check if the controller/camera pair has changed, else ignore */ + if (sw_status[yaddr] != xaddr) + { + /* "open" the old switch, "close" the new one, save the new */ + kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0); + sw_status[yaddr] = xaddr; + kodicom4400r_write(mctlr, xaddr, yaddr, 1); + } +} + +/* + * During initialisation, we need to reset the analog switch. We + * also preset the switch to map the 4 connectors on the card to the + * *user's* (see above description of kodicom4400r_muxsel) channels + * 0 through 3 + */ +static void kodicom4400r_init(struct bttv *btv) +{ + char *sw_status = (char *)(&btv->mbox_we); + int ix; + + gpio_inout(0x0003ff, 0x0003ff); + gpio_write(1 << 9); /* reset MUX */ + gpio_write(0); + /* Preset camera 0 to the 4 controllers */ + for (ix = 0; ix < 4; ix++) { + sw_status[ix] = ix; + kodicom4400r_write(btv, ix, ix, 1); + } + /* + * Since this is the "master", we need to set up the + * other three controller chips' pointers to this structure + * for later use in the muxsel routine. + */ + if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) + return; + master[btv->c.nr-1] = btv; + master[btv->c.nr] = btv; + master[btv->c.nr+1] = btv; + master[btv->c.nr+2] = btv; +} + +/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel + * video multiplexers to provide up to 16 video inputs. These + * multiplexers are controlled by the lower 8 GPIO pins of the + * bt878. The multiplexers probably Pericom PI5V331Q or similar. + + * xxx0 is pin xxx of multiplexer U5, + * yyy1 is pin yyy of multiplexer U2 + */ +#define ENA0 0x01 +#define ENB0 0x02 +#define ENA1 0x04 +#define ENB1 0x08 + +#define IN10 0x10 +#define IN00 0x20 +#define IN11 0x40 +#define IN01 0x80 + +static void xguard_muxsel(struct bttv *btv, unsigned int input) +{ + static const int masks[] = { + ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, + ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, + ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, + ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, + }; + gpio_write(masks[input%16]); +} +static void picolo_tetra_init(struct bttv *btv) +{ + /*This is the video input redirection fonctionality : I DID NOT USED IT. */ + btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ + btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ +} +static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) +{ + + dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input); + /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ + /*GPIO[20]&GPIO[21] used to choose the right input*/ + btwrite (input<<20,BT848_GPIO_DATA); + +} + +/* + * ivc120_muxsel [Added by Alan Garfield ] + * + * The IVC120G security card has 4 i2c controlled TDA8540 matrix + * swichers to provide 16 channels to MUX0. The TDA8540's have + * 4 independent outputs and as such the IVC120G also has the + * optional "Monitor Out" bus. This allows the card to be looking + * at one input while the monitor is looking at another. + * + * Since I've couldn't be bothered figuring out how to add an + * independent muxsel for the monitor bus, I've just set it to + * whatever the card is looking at. + * + * OUT0 of the TDA8540's is connected to MUX0 (0x03) + * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) + * + * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) + * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) + * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) + * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) + * + */ + +/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ +#define I2C_TDA8540 0x90 +#define I2C_TDA8540_ALT1 0x92 +#define I2C_TDA8540_ALT2 0x94 +#define I2C_TDA8540_ALT3 0x96 +#define I2C_TDA8540_ALT4 0x98 +#define I2C_TDA8540_ALT5 0x9a +#define I2C_TDA8540_ALT6 0x9c + +static void ivc120_muxsel(struct bttv *btv, unsigned int input) +{ + /* Simple maths */ + int key = input % 4; + int matrix = input / 4; + + dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", + btv->c.nr, input, matrix, key); + + /* Handles the input selection on the TDA8540's */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, + ((matrix == 3) ? (key | key << 2) : 0x00), 1); + bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, + ((matrix == 0) ? (key | key << 2) : 0x00), 1); + bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, + ((matrix == 1) ? (key | key << 2) : 0x00), 1); + bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, + ((matrix == 2) ? (key | key << 2) : 0x00), 1); + + /* Handles the output enables on the TDA8540's */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, + ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, + ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, + ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, + ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ + + /* 878's MUX0 is already selected for input via muxsel values */ +} + + +/* PXC200 muxsel helper + * luke@syseng.anu.edu.au + * another transplant + * from Alessandro Rubini (rubini@linux.it) + * + * There are 4 kinds of cards: + * PXC200L which is bt848 + * PXC200F which is bt848 with PIC controlling mux + * PXC200AL which is bt878 + * PXC200AF which is bt878 with PIC controlling mux + */ +#define PX_CFG_PXC200F 0x01 +#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ +#define PX_I2C_PIC 0x0f +#define PX_PXC200A_CARDID 0x200a1295 +#define PX_I2C_CMD_CFG 0x00 + +static void PXC200_muxsel(struct bttv *btv, unsigned int input) +{ + int rc; + long mux; + int bitmask; + unsigned char buf[2]; + + /* Read PIC config to determine if this is a PXC200F */ + /* PX_I2C_CMD_CFG*/ + buf[0]=0; + buf[1]=0; + rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); + if (rc) { + pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n", + btv->c.nr, rc); + /* not PXC ? do nothing */ + return; + } + + rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); + if (!(rc & PX_CFG_PXC200F)) { + pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n", + btv->c.nr, rc); + return; + } + + + /* The multiplexer in the 200F is handled by the GPIO port */ + /* get correct mapping between inputs */ + /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ + /* ** not needed!? */ + mux = input; + + /* make sure output pins are enabled */ + /* bitmask=0x30f; */ + bitmask=0x302; + /* check whether we have a PXC200A */ + if (btv->cardid == PX_PXC200A_CARDID) { + bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ + bitmask |= 7<<4; /* the DAC */ + } + btwrite(bitmask, BT848_GPIO_OUT_EN); + + bitmask = btread(BT848_GPIO_DATA); + if (btv->cardid == PX_PXC200A_CARDID) + bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); + else /* older device */ + bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); + btwrite(bitmask,BT848_GPIO_DATA); + + /* + * Was "to be safe, set the bt848 to input 0" + * Actually, since it's ok at load time, better not messing + * with these bits (on PXC200AF you need to set mux 2 here) + * + * needed because bttv-driver sets mux before calling this function + */ + if (btv->cardid == PX_PXC200A_CARDID) + btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); + else /* older device */ + btand(~BT848_IFORM_MUXSEL,BT848_IFORM); + + pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux); +} + +static void phytec_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int mux = input % 4; + + if (input == btv->svhs) + mux = 0; + + gpio_bits(0x3, mux); +} + +/* + * GeoVision GV-800(S) functions + * Bruno Christo +*/ + +/* This is a function to control the analog switch, which determines which + * camera is routed to which controller. The switch comprises an X-address + * (gpio bits 0-3, representing the camera, ranging from 0-15), and a + * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). + * A data value (gpio bit 18) of '1' enables the switch, and '0' disables + * the switch. A STROBE bit (gpio bit 17) latches the data value into the + * specified address. There is also a chip select (gpio bit 16). + * The idea is to set the address and chip select together, bring + * STROBE high, write the data, and finally bring STROBE back to low. + */ +static void gv800s_write(struct bttv *btv, + unsigned char xaddr, + unsigned char yaddr, + unsigned char data) { + /* On the "master" 878A: + * GPIO bits 0-9 are used for the analog switch: + * 00 - 03: camera selector + * 04 - 06: 878A (controller) selector + * 16: cselect + * 17: strobe + * 18: data (1->on, 0->off) + * 19: reset + */ + const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4); + const u32 CSELECT = 1<<16; + const u32 STROBE = 1<<17; + const u32 DATA = data<<18; + + gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */ + gpio_bits(0x20000, STROBE); /* STROBE high */ + gpio_bits(0x40000, DATA); /* write DATA */ + gpio_bits(0x20000, ~STROBE); /* STROBE low */ +} + +/* + * GeoVision GV-800(S) muxsel + * + * Each of the 4 cards (controllers) use this function. + * The controller using this function selects the input through the GPIO pins + * of the "master" card. A pointer to this card is stored in master[btv->c.nr]. + * + * The parameter 'input' is the requested camera number (0-4) on the controller. + * The map array has the address of each input. Note that the addresses in the + * array are in the sequence the original GeoVision driver uses, that is, set + * every controller to input 0, then to input 1, 2, 3, repeat. This means that + * the physical "camera 1" connector corresponds to controller 0 input 0, + * "camera 2" corresponds to controller 1 input 0, and so on. + * + * After getting the input address, the function then writes the appropriate + * data to the analog switch, and housekeeps the local copy of the switch + * information. + */ +static void gv800s_muxsel(struct bttv *btv, unsigned int input) +{ + struct bttv *mctlr; + char *sw_status; + int xaddr, yaddr; + static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 }, + { 0x1, 0x5, 0xb, 0x7 }, + { 0x2, 0x8, 0xc, 0xe }, + { 0x3, 0x9, 0xd, 0xf } }; + input = input%4; + mctlr = master[btv->c.nr]; + if (mctlr == NULL) { + /* do nothing until the "master" is detected */ + return; + } + yaddr = (btv->c.nr - mctlr->c.nr) & 3; + sw_status = (char *)(&mctlr->mbox_we); + xaddr = map[yaddr][input] & 0xf; + + /* Check if the controller/camera pair has changed, ignore otherwise */ + if (sw_status[yaddr] != xaddr) { + /* disable the old switch, enable the new one and save status */ + gv800s_write(mctlr, sw_status[yaddr], yaddr, 0); + sw_status[yaddr] = xaddr; + gv800s_write(mctlr, xaddr, yaddr, 1); + } +} + +/* GeoVision GV-800(S) "master" chip init */ +static void gv800s_init(struct bttv *btv) +{ + char *sw_status = (char *)(&btv->mbox_we); + int ix; + + gpio_inout(0xf107f, 0xf107f); + gpio_write(1<<19); /* reset the analog MUX */ + gpio_write(0); + + /* Preset camera 0 to the 4 controllers */ + for (ix = 0; ix < 4; ix++) { + sw_status[ix] = ix; + gv800s_write(btv, ix, ix, 1); + } + + /* Inputs on the "master" controller need this brightness fix */ + bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1); + + if (btv->c.nr > BTTV_MAX-4) + return; + /* + * Store the "master" controller pointer in the master + * array for later use in the muxsel function. + */ + master[btv->c.nr] = btv; + master[btv->c.nr+1] = btv; + master[btv->c.nr+2] = btv; + master[btv->c.nr+3] = btv; +} + +/* ----------------------------------------------------------------------- */ +/* motherboard chipset specific stuff */ + +void __init bttv_check_chipset(void) +{ + int pcipci_fail = 0; + struct pci_dev *dev = NULL; + + if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */ + pcipci_fail = 1; + if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) + triton1 = 1; + if (pci_pci_problems & PCIPCI_VSFX) + vsfx = 1; +#ifdef PCIPCI_ALIMAGIK + if (pci_pci_problems & PCIPCI_ALIMAGIK) + latency = 0x0A; +#endif + + + /* print warnings about any quirks found */ + if (triton1) + pr_info("Host bridge needs ETBF enabled\n"); + if (vsfx) + pr_info("Host bridge needs VSFX enabled\n"); + if (pcipci_fail) { + pr_info("bttv and your chipset may not work together\n"); + if (!no_overlay) { + pr_info("overlay will be disabled\n"); + no_overlay = 1; + } else { + pr_info("overlay forced. Use this option at your own risk.\n"); + } + } + if (UNSET != latency) + pr_info("pci latency fixup [%d]\n", latency); + while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82441, dev))) { + unsigned char b; + pci_read_config_byte(dev, 0x53, &b); + if (bttv_debug) + pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n", + b); + } +} + +int bttv_handle_chipset(struct bttv *btv) +{ + unsigned char command; + + if (!triton1 && !vsfx && UNSET == latency) + return 0; + + if (bttv_verbose) { + if (triton1) + pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n", + btv->c.nr); + if (vsfx && btv->id >= 878) + pr_info("%d: enabling VSFX\n", btv->c.nr); + if (UNSET != latency) + pr_info("%d: setting pci timer to %d\n", + btv->c.nr, latency); + } + + if (btv->id < 878) { + /* bt848 (mis)uses a bit in the irq mask for etbf */ + if (triton1) + btv->triton1 = BT848_INT_ETBF; + } else { + /* bt878 has a bit in the pci config space for it */ + pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); + if (triton1) + command |= BT878_EN_TBFX; + if (vsfx) + command |= BT878_EN_VSFX; + pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); + } + if (UNSET != latency) + pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); + return 0; +} + + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c new file mode 100644 index 00000000..e2633d92 --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -0,0 +1,4481 @@ +/* + + bttv - Bt848 frame grabber driver + + Copyright (C) 1996,97,98 Ralph Metzler + & Marcus Metzler + (c) 1999-2002 Gerd Knorr + + some v4l2 code lines are taken from Justin's bttv2 driver which is + (c) 2000 Justin Schoeman + + V4L1 removal from: + (c) 2005-2006 Nickolay V. Shmyrev + + Fixes to be fully V4L2 compliant by + (c) 2006 Mauro Carvalho Chehab + + Cropping and overscan support + Copyright (C) 2005, 2006 Michael H. Schimek + Sponsored by OPQ Systems AB + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "bttvp.h" +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include + +#define BTTV_VERSION "0.9.19" + +unsigned int bttv_num; /* number of Bt848s in use */ +struct bttv *bttvs[BTTV_MAX]; + +unsigned int bttv_debug; +unsigned int bttv_verbose = 1; +unsigned int bttv_gpio; + +/* config variables */ +#ifdef __BIG_ENDIAN +static unsigned int bigendian=1; +#else +static unsigned int bigendian; +#endif +static unsigned int radio[BTTV_MAX]; +static unsigned int irq_debug; +static unsigned int gbuffers = 8; +static unsigned int gbufsize = 0x208000; +static unsigned int reset_crop = 1; + +static int video_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; +static int radio_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; +static int vbi_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; +static int debug_latency; +static int disable_ir; + +static unsigned int fdsr; + +/* options */ +static unsigned int combfilter; +static unsigned int lumafilter; +static unsigned int automute = 1; +static unsigned int chroma_agc; +static unsigned int agc_crush = 1; +static unsigned int whitecrush_upper = 0xCF; +static unsigned int whitecrush_lower = 0x7F; +static unsigned int vcr_hack; +static unsigned int irq_iswitch; +static unsigned int uv_ratio = 50; +static unsigned int full_luma_range; +static unsigned int coring; + +/* API features (turn on/off stuff for testing) */ +static unsigned int v4l2 = 1; + +/* insmod args */ +module_param(bttv_verbose, int, 0644); +module_param(bttv_gpio, int, 0644); +module_param(bttv_debug, int, 0644); +module_param(irq_debug, int, 0644); +module_param(debug_latency, int, 0644); +module_param(disable_ir, int, 0444); + +module_param(fdsr, int, 0444); +module_param(gbuffers, int, 0444); +module_param(gbufsize, int, 0444); +module_param(reset_crop, int, 0444); + +module_param(v4l2, int, 0644); +module_param(bigendian, int, 0644); +module_param(irq_iswitch, int, 0644); +module_param(combfilter, int, 0444); +module_param(lumafilter, int, 0444); +module_param(automute, int, 0444); +module_param(chroma_agc, int, 0444); +module_param(agc_crush, int, 0444); +module_param(whitecrush_upper, int, 0444); +module_param(whitecrush_lower, int, 0444); +module_param(vcr_hack, int, 0444); +module_param(uv_ratio, int, 0444); +module_param(full_luma_range, int, 0444); +module_param(coring, int, 0444); + +module_param_array(radio, int, NULL, 0444); +module_param_array(video_nr, int, NULL, 0444); +module_param_array(radio_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); + +MODULE_PARM_DESC(radio, "The TV card supports radio, default is 0 (no)"); +MODULE_PARM_DESC(bigendian, "byte order of the framebuffer, default is native endian"); +MODULE_PARM_DESC(bttv_verbose, "verbose startup messages, default is 1 (yes)"); +MODULE_PARM_DESC(bttv_gpio, "log gpio changes, default is 0 (no)"); +MODULE_PARM_DESC(bttv_debug, "debug messages, default is 0 (no)"); +MODULE_PARM_DESC(irq_debug, "irq handler debug messages, default is 0 (no)"); +MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); +MODULE_PARM_DESC(gbuffers, "number of capture buffers. range 2-32, default 8"); +MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 0x208000"); +MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default " + "is 1 (yes) for compatibility with older applications"); +MODULE_PARM_DESC(automute, "mute audio on bad/missing video signal, default is 1 (yes)"); +MODULE_PARM_DESC(chroma_agc, "enables the AGC of chroma signal, default is 0 (no)"); +MODULE_PARM_DESC(agc_crush, "enables the luminance AGC crush, default is 1 (yes)"); +MODULE_PARM_DESC(whitecrush_upper, "sets the white crush upper value, default is 207"); +MODULE_PARM_DESC(whitecrush_lower, "sets the white crush lower value, default is 127"); +MODULE_PARM_DESC(vcr_hack, "enables the VCR hack (improves synch on poor VCR tapes), default is 0 (no)"); +MODULE_PARM_DESC(irq_iswitch, "switch inputs in irq handler"); +MODULE_PARM_DESC(uv_ratio, "ratio between u and v gains, default is 50"); +MODULE_PARM_DESC(full_luma_range, "use the full luma range, default is 0 (no)"); +MODULE_PARM_DESC(coring, "set the luma coring level, default is 0 (no)"); +MODULE_PARM_DESC(video_nr, "video device numbers"); +MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); +MODULE_PARM_DESC(radio_nr, "radio device numbers"); + +MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards"); +MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(BTTV_VERSION); + +#define V4L2_CID_PRIVATE_COMBFILTER (V4L2_CID_USER_BTTV_BASE + 0) +#define V4L2_CID_PRIVATE_AUTOMUTE (V4L2_CID_USER_BTTV_BASE + 1) +#define V4L2_CID_PRIVATE_LUMAFILTER (V4L2_CID_USER_BTTV_BASE + 2) +#define V4L2_CID_PRIVATE_AGC_CRUSH (V4L2_CID_USER_BTTV_BASE + 3) +#define V4L2_CID_PRIVATE_VCR_HACK (V4L2_CID_USER_BTTV_BASE + 4) +#define V4L2_CID_PRIVATE_WHITECRUSH_LOWER (V4L2_CID_USER_BTTV_BASE + 5) +#define V4L2_CID_PRIVATE_WHITECRUSH_UPPER (V4L2_CID_USER_BTTV_BASE + 6) +#define V4L2_CID_PRIVATE_UV_RATIO (V4L2_CID_USER_BTTV_BASE + 7) +#define V4L2_CID_PRIVATE_FULL_LUMA_RANGE (V4L2_CID_USER_BTTV_BASE + 8) +#define V4L2_CID_PRIVATE_CORING (V4L2_CID_USER_BTTV_BASE + 9) + +/* ----------------------------------------------------------------------- */ +/* sysfs */ + +static ssize_t show_card(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vfd = container_of(cd, struct video_device, dev); + struct bttv *btv = video_get_drvdata(vfd); + return sprintf(buf, "%d\n", btv ? btv->c.type : UNSET); +} +static DEVICE_ATTR(card, S_IRUGO, show_card, NULL); + +/* ----------------------------------------------------------------------- */ +/* dvb auto-load setup */ +#if defined(CONFIG_MODULES) && defined(MODULE) +static void request_module_async(struct work_struct *work) +{ + request_module("dvb-bt8xx"); +} + +static void request_modules(struct bttv *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_modules(struct bttv *dev) +{ + flush_work(&dev->request_module_wk); +} +#else +#define request_modules(dev) +#define flush_request_modules(dev) do {} while(0) +#endif /* CONFIG_MODULES */ + + +/* ----------------------------------------------------------------------- */ +/* static data */ + +/* special timing tables from conexant... */ +static u8 SRAM_Table[][60] = +{ + /* PAL digital input over GPIO[7:0] */ + { + 45, // 45 bytes following + 0x36,0x11,0x01,0x00,0x90,0x02,0x05,0x10,0x04,0x16, + 0x12,0x05,0x11,0x00,0x04,0x12,0xC0,0x00,0x31,0x00, + 0x06,0x51,0x08,0x03,0x89,0x08,0x07,0xC0,0x44,0x00, + 0x81,0x01,0x01,0xA9,0x0D,0x02,0x02,0x50,0x03,0x37, + 0x37,0x00,0xAF,0x21,0x00 + }, + /* NTSC digital input over GPIO[7:0] */ + { + 51, // 51 bytes following + 0x0C,0xC0,0x00,0x00,0x90,0x02,0x03,0x10,0x03,0x06, + 0x10,0x04,0x12,0x12,0x05,0x02,0x13,0x04,0x19,0x00, + 0x04,0x39,0x00,0x06,0x59,0x08,0x03,0x83,0x08,0x07, + 0x03,0x50,0x00,0xC0,0x40,0x00,0x86,0x01,0x01,0xA6, + 0x0D,0x02,0x03,0x11,0x01,0x05,0x37,0x00,0xAC,0x21, + 0x00, + }, + // TGB_NTSC392 // quartzsight + // This table has been modified to be used for Fusion Rev D + { + 0x2A, // size of table = 42 + 0x06, 0x08, 0x04, 0x0a, 0xc0, 0x00, 0x18, 0x08, 0x03, 0x24, + 0x08, 0x07, 0x02, 0x90, 0x02, 0x08, 0x10, 0x04, 0x0c, 0x10, + 0x05, 0x2c, 0x11, 0x04, 0x55, 0x48, 0x00, 0x05, 0x50, 0x00, + 0xbf, 0x0c, 0x02, 0x2f, 0x3d, 0x00, 0x2f, 0x3f, 0x00, 0xc3, + 0x20, 0x00 + } +}; + +/* minhdelayx1 first video pixel we can capture on a line and + hdelayx1 start of active video, both relative to rising edge of + /HRESET pulse (0H) in 1 / fCLKx1. + swidth width of active video and + totalwidth total line width, both in 1 / fCLKx1. + sqwidth total line width in square pixels. + vdelay start of active video in 2 * field lines relative to + trailing edge of /VRESET pulse (VDELAY register). + sheight height of active video in 2 * field lines. + extraheight Added to sheight for cropcap.bounds.height only + videostart0 ITU-R frame line number of the line corresponding + to vdelay in the first field. */ +#define CROPCAP(minhdelayx1, hdelayx1, swidth, totalwidth, sqwidth, \ + vdelay, sheight, extraheight, videostart0) \ + .cropcap.bounds.left = minhdelayx1, \ + /* * 2 because vertically we count field lines times two, */ \ + /* e.g. 23 * 2 to 23 * 2 + 576 in PAL-BGHI defrect. */ \ + .cropcap.bounds.top = (videostart0) * 2 - (vdelay) + MIN_VDELAY, \ + /* 4 is a safety margin at the end of the line. */ \ + .cropcap.bounds.width = (totalwidth) - (minhdelayx1) - 4, \ + .cropcap.bounds.height = (sheight) + (extraheight) + (vdelay) - \ + MIN_VDELAY, \ + .cropcap.defrect.left = hdelayx1, \ + .cropcap.defrect.top = (videostart0) * 2, \ + .cropcap.defrect.width = swidth, \ + .cropcap.defrect.height = sheight, \ + .cropcap.pixelaspect.numerator = totalwidth, \ + .cropcap.pixelaspect.denominator = sqwidth, + +const struct bttv_tvnorm bttv_tvnorms[] = { + /* PAL-BDGHI */ + /* max. active video is actually 922, but 924 is divisible by 4 and 3! */ + /* actually, max active PAL with HSCALE=0 is 948, NTSC is 768 - nil */ + { + .v4l2_id = V4L2_STD_PAL, + .name = "PAL", + .Fsc = 35468950, + .swidth = 924, + .sheight = 576, + .totalwidth = 1135, + .adelay = 0x7f, + .bdelay = 0x72, + .iform = (BT848_IFORM_PAL_BDGHI|BT848_IFORM_XT1), + .scaledtwidth = 1135, + .hdelayx1 = 186, + .hactivex1 = 924, + .vdelay = 0x20, + .vbipack = 255, /* min (2048 / 4, 0x1ff) & 0xff */ + .sram = 0, + /* ITU-R frame line number of the first VBI line + we can capture, of the first and second field. + The last line is determined by cropcap.bounds. */ + .vbistart = { 7, 320 }, + CROPCAP(/* minhdelayx1 */ 68, + /* hdelayx1 */ 186, + /* Should be (768 * 1135 + 944 / 2) / 944. + cropcap.defrect is used for image width + checks, so we keep the old value 924. */ + /* swidth */ 924, + /* totalwidth */ 1135, + /* sqwidth */ 944, + /* vdelay */ 0x20, + /* sheight */ 576, + /* bt878 (and bt848?) can capture another + line below active video. */ + /* extraheight */ 2, + /* videostart0 */ 23) + },{ + .v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR, + .name = "NTSC", + .Fsc = 28636363, + .swidth = 768, + .sheight = 480, + .totalwidth = 910, + .adelay = 0x68, + .bdelay = 0x5d, + .iform = (BT848_IFORM_NTSC|BT848_IFORM_XT0), + .scaledtwidth = 910, + .hdelayx1 = 128, + .hactivex1 = 910, + .vdelay = 0x1a, + .vbipack = 144, /* min (1600 / 4, 0x1ff) & 0xff */ + .sram = 1, + .vbistart = { 10, 273 }, + CROPCAP(/* minhdelayx1 */ 68, + /* hdelayx1 */ 128, + /* Should be (640 * 910 + 780 / 2) / 780? */ + /* swidth */ 768, + /* totalwidth */ 910, + /* sqwidth */ 780, + /* vdelay */ 0x1a, + /* sheight */ 480, + /* extraheight */ 0, + /* videostart0 */ 23) + },{ + .v4l2_id = V4L2_STD_SECAM, + .name = "SECAM", + .Fsc = 35468950, + .swidth = 924, + .sheight = 576, + .totalwidth = 1135, + .adelay = 0x7f, + .bdelay = 0xb0, + .iform = (BT848_IFORM_SECAM|BT848_IFORM_XT1), + .scaledtwidth = 1135, + .hdelayx1 = 186, + .hactivex1 = 922, + .vdelay = 0x20, + .vbipack = 255, + .sram = 0, /* like PAL, correct? */ + .vbistart = { 7, 320 }, + CROPCAP(/* minhdelayx1 */ 68, + /* hdelayx1 */ 186, + /* swidth */ 924, + /* totalwidth */ 1135, + /* sqwidth */ 944, + /* vdelay */ 0x20, + /* sheight */ 576, + /* extraheight */ 0, + /* videostart0 */ 23) + },{ + .v4l2_id = V4L2_STD_PAL_Nc, + .name = "PAL-Nc", + .Fsc = 28636363, + .swidth = 640, + .sheight = 576, + .totalwidth = 910, + .adelay = 0x68, + .bdelay = 0x5d, + .iform = (BT848_IFORM_PAL_NC|BT848_IFORM_XT0), + .scaledtwidth = 780, + .hdelayx1 = 130, + .hactivex1 = 734, + .vdelay = 0x1a, + .vbipack = 144, + .sram = -1, + .vbistart = { 7, 320 }, + CROPCAP(/* minhdelayx1 */ 68, + /* hdelayx1 */ 130, + /* swidth */ (640 * 910 + 780 / 2) / 780, + /* totalwidth */ 910, + /* sqwidth */ 780, + /* vdelay */ 0x1a, + /* sheight */ 576, + /* extraheight */ 0, + /* videostart0 */ 23) + },{ + .v4l2_id = V4L2_STD_PAL_M, + .name = "PAL-M", + .Fsc = 28636363, + .swidth = 640, + .sheight = 480, + .totalwidth = 910, + .adelay = 0x68, + .bdelay = 0x5d, + .iform = (BT848_IFORM_PAL_M|BT848_IFORM_XT0), + .scaledtwidth = 780, + .hdelayx1 = 135, + .hactivex1 = 754, + .vdelay = 0x1a, + .vbipack = 144, + .sram = -1, + .vbistart = { 10, 273 }, + CROPCAP(/* minhdelayx1 */ 68, + /* hdelayx1 */ 135, + /* swidth */ (640 * 910 + 780 / 2) / 780, + /* totalwidth */ 910, + /* sqwidth */ 780, + /* vdelay */ 0x1a, + /* sheight */ 480, + /* extraheight */ 0, + /* videostart0 */ 23) + },{ + .v4l2_id = V4L2_STD_PAL_N, + .name = "PAL-N", + .Fsc = 35468950, + .swidth = 768, + .sheight = 576, + .totalwidth = 1135, + .adelay = 0x7f, + .bdelay = 0x72, + .iform = (BT848_IFORM_PAL_N|BT848_IFORM_XT1), + .scaledtwidth = 944, + .hdelayx1 = 186, + .hactivex1 = 922, + .vdelay = 0x20, + .vbipack = 144, + .sram = -1, + .vbistart = { 7, 320 }, + CROPCAP(/* minhdelayx1 */ 68, + /* hdelayx1 */ 186, + /* swidth */ (768 * 1135 + 944 / 2) / 944, + /* totalwidth */ 1135, + /* sqwidth */ 944, + /* vdelay */ 0x20, + /* sheight */ 576, + /* extraheight */ 0, + /* videostart0 */ 23) + },{ + .v4l2_id = V4L2_STD_NTSC_M_JP, + .name = "NTSC-JP", + .Fsc = 28636363, + .swidth = 640, + .sheight = 480, + .totalwidth = 910, + .adelay = 0x68, + .bdelay = 0x5d, + .iform = (BT848_IFORM_NTSC_J|BT848_IFORM_XT0), + .scaledtwidth = 780, + .hdelayx1 = 135, + .hactivex1 = 754, + .vdelay = 0x16, + .vbipack = 144, + .sram = -1, + .vbistart = { 10, 273 }, + CROPCAP(/* minhdelayx1 */ 68, + /* hdelayx1 */ 135, + /* swidth */ (640 * 910 + 780 / 2) / 780, + /* totalwidth */ 910, + /* sqwidth */ 780, + /* vdelay */ 0x16, + /* sheight */ 480, + /* extraheight */ 0, + /* videostart0 */ 23) + },{ + /* that one hopefully works with the strange timing + * which video recorders produce when playing a NTSC + * tape on a PAL TV ... */ + .v4l2_id = V4L2_STD_PAL_60, + .name = "PAL-60", + .Fsc = 35468950, + .swidth = 924, + .sheight = 480, + .totalwidth = 1135, + .adelay = 0x7f, + .bdelay = 0x72, + .iform = (BT848_IFORM_PAL_BDGHI|BT848_IFORM_XT1), + .scaledtwidth = 1135, + .hdelayx1 = 186, + .hactivex1 = 924, + .vdelay = 0x1a, + .vbipack = 255, + .vtotal = 524, + .sram = -1, + .vbistart = { 10, 273 }, + CROPCAP(/* minhdelayx1 */ 68, + /* hdelayx1 */ 186, + /* swidth */ 924, + /* totalwidth */ 1135, + /* sqwidth */ 944, + /* vdelay */ 0x1a, + /* sheight */ 480, + /* extraheight */ 0, + /* videostart0 */ 23) + } +}; +static const unsigned int BTTV_TVNORMS = ARRAY_SIZE(bttv_tvnorms); + +/* ----------------------------------------------------------------------- */ +/* bttv format list + packed pixel formats must come first */ +static const struct bttv_format formats[] = { + { + .name = "8 bpp, gray", + .fourcc = V4L2_PIX_FMT_GREY, + .btformat = BT848_COLOR_FMT_Y8, + .depth = 8, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "8 bpp, dithered color", + .fourcc = V4L2_PIX_FMT_HI240, + .btformat = BT848_COLOR_FMT_RGB8, + .depth = 8, + .flags = FORMAT_FLAGS_PACKED | FORMAT_FLAGS_DITHER, + },{ + .name = "15 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB555, + .btformat = BT848_COLOR_FMT_RGB15, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "15 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB555X, + .btformat = BT848_COLOR_FMT_RGB15, + .btswap = 0x03, /* byteswap */ + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "16 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB565, + .btformat = BT848_COLOR_FMT_RGB16, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "16 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB565X, + .btformat = BT848_COLOR_FMT_RGB16, + .btswap = 0x03, /* byteswap */ + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "24 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR24, + .btformat = BT848_COLOR_FMT_RGB24, + .depth = 24, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "32 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR32, + .btformat = BT848_COLOR_FMT_RGB32, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "32 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB32, + .btformat = BT848_COLOR_FMT_RGB32, + .btswap = 0x0f, /* byte+word swap */ + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .btformat = BT848_COLOR_FMT_YUY2, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .btformat = BT848_COLOR_FMT_YUY2, + .btswap = 0x03, /* byteswap */ + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "4:2:2, planar, Y-Cb-Cr", + .fourcc = V4L2_PIX_FMT_YUV422P, + .btformat = BT848_COLOR_FMT_YCrCb422, + .depth = 16, + .flags = FORMAT_FLAGS_PLANAR, + .hshift = 1, + .vshift = 0, + },{ + .name = "4:2:0, planar, Y-Cb-Cr", + .fourcc = V4L2_PIX_FMT_YUV420, + .btformat = BT848_COLOR_FMT_YCrCb422, + .depth = 12, + .flags = FORMAT_FLAGS_PLANAR, + .hshift = 1, + .vshift = 1, + },{ + .name = "4:2:0, planar, Y-Cr-Cb", + .fourcc = V4L2_PIX_FMT_YVU420, + .btformat = BT848_COLOR_FMT_YCrCb422, + .depth = 12, + .flags = FORMAT_FLAGS_PLANAR | FORMAT_FLAGS_CrCb, + .hshift = 1, + .vshift = 1, + },{ + .name = "4:1:1, planar, Y-Cb-Cr", + .fourcc = V4L2_PIX_FMT_YUV411P, + .btformat = BT848_COLOR_FMT_YCrCb411, + .depth = 12, + .flags = FORMAT_FLAGS_PLANAR, + .hshift = 2, + .vshift = 0, + },{ + .name = "4:1:0, planar, Y-Cb-Cr", + .fourcc = V4L2_PIX_FMT_YUV410, + .btformat = BT848_COLOR_FMT_YCrCb411, + .depth = 9, + .flags = FORMAT_FLAGS_PLANAR, + .hshift = 2, + .vshift = 2, + },{ + .name = "4:1:0, planar, Y-Cr-Cb", + .fourcc = V4L2_PIX_FMT_YVU410, + .btformat = BT848_COLOR_FMT_YCrCb411, + .depth = 9, + .flags = FORMAT_FLAGS_PLANAR | FORMAT_FLAGS_CrCb, + .hshift = 2, + .vshift = 2, + },{ + .name = "raw scanlines", + .fourcc = -1, + .btformat = BT848_COLOR_FMT_RAW, + .depth = 8, + .flags = FORMAT_FLAGS_RAW, + } +}; +static const unsigned int FORMATS = ARRAY_SIZE(formats); + +/* ----------------------------------------------------------------------- */ +/* resource management */ + +/* + RESOURCE_ allocated by freed by + + VIDEO_READ bttv_read 1) bttv_read 2) + + VIDEO_STREAM VIDIOC_STREAMON VIDIOC_STREAMOFF + VIDIOC_QBUF 1) bttv_release + VIDIOCMCAPTURE 1) + + OVERLAY VIDIOCCAPTURE on VIDIOCCAPTURE off + VIDIOC_OVERLAY on VIDIOC_OVERLAY off + 3) bttv_release + + VBI VIDIOC_STREAMON VIDIOC_STREAMOFF + VIDIOC_QBUF 1) bttv_release + bttv_read, bttv_poll 1) 4) + + 1) The resource must be allocated when we enter buffer prepare functions + and remain allocated while buffers are in the DMA queue. + 2) This is a single frame read. + 3) VIDIOC_S_FBUF and VIDIOC_S_FMT (OVERLAY) still work when + RESOURCE_OVERLAY is allocated. + 4) This is a continuous read, implies VIDIOC_STREAMON. + + Note this driver permits video input and standard changes regardless if + resources are allocated. +*/ + +#define VBI_RESOURCES (RESOURCE_VBI) +#define VIDEO_RESOURCES (RESOURCE_VIDEO_READ | \ + RESOURCE_VIDEO_STREAM | \ + RESOURCE_OVERLAY) + +static +int check_alloc_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bit) +{ + int xbits; /* mutual exclusive resources */ + + if (fh->resources & bit) + /* have it already allocated */ + return 1; + + xbits = bit; + if (bit & (RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM)) + xbits |= RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM; + + /* is it free? */ + if (btv->resources & xbits) { + /* no, someone else uses it */ + goto fail; + } + + if ((bit & VIDEO_RESOURCES) + && 0 == (btv->resources & VIDEO_RESOURCES)) { + /* Do crop - use current, don't - use default parameters. */ + __s32 top = btv->crop[!!fh->do_crop].rect.top; + + if (btv->vbi_end > top) + goto fail; + + /* We cannot capture the same line as video and VBI data. + Claim scan lines crop[].rect.top to bottom. */ + btv->crop_start = top; + } else if (bit & VBI_RESOURCES) { + __s32 end = fh->vbi_fmt.end; + + if (end > btv->crop_start) + goto fail; + + /* Claim scan lines above fh->vbi_fmt.end. */ + btv->vbi_end = end; + } + + /* it's free, grab it */ + fh->resources |= bit; + btv->resources |= bit; + return 1; + + fail: + return 0; +} + +static +int check_btres(struct bttv_fh *fh, int bit) +{ + return (fh->resources & bit); +} + +static +int locked_btres(struct bttv *btv, int bit) +{ + return (btv->resources & bit); +} + +/* Call with btv->lock down. */ +static void +disclaim_vbi_lines(struct bttv *btv) +{ + btv->vbi_end = 0; +} + +/* Call with btv->lock down. */ +static void +disclaim_video_lines(struct bttv *btv) +{ + const struct bttv_tvnorm *tvnorm; + u8 crop; + + tvnorm = &bttv_tvnorms[btv->tvnorm]; + btv->crop_start = tvnorm->cropcap.bounds.top + + tvnorm->cropcap.bounds.height; + + /* VBI capturing ends at VDELAY, start of video capturing, no + matter how many lines the VBI RISC program expects. When video + capturing is off, it shall no longer "preempt" VBI capturing, + so we set VDELAY to maximum. */ + crop = btread(BT848_E_CROP) | 0xc0; + btwrite(crop, BT848_E_CROP); + btwrite(0xfe, BT848_E_VDELAY_LO); + btwrite(crop, BT848_O_CROP); + btwrite(0xfe, BT848_O_VDELAY_LO); +} + +static +void free_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bits) +{ + if ((fh->resources & bits) != bits) { + /* trying to free resources not allocated by us ... */ + pr_err("BUG! (btres)\n"); + } + fh->resources &= ~bits; + btv->resources &= ~bits; + + bits = btv->resources; + + if (0 == (bits & VIDEO_RESOURCES)) + disclaim_video_lines(btv); + + if (0 == (bits & VBI_RESOURCES)) + disclaim_vbi_lines(btv); +} + +/* ----------------------------------------------------------------------- */ +/* If Bt848a or Bt849, use PLL for PAL/SECAM and crystal for NTSC */ + +/* Frequency = (F_input / PLL_X) * PLL_I.PLL_F/PLL_C + PLL_X = Reference pre-divider (0=1, 1=2) + PLL_C = Post divider (0=6, 1=4) + PLL_I = Integer input + PLL_F = Fractional input + + F_input = 28.636363 MHz: + PAL (CLKx2 = 35.46895 MHz): PLL_X = 1, PLL_I = 0x0E, PLL_F = 0xDCF9, PLL_C = 0 +*/ + +static void set_pll_freq(struct bttv *btv, unsigned int fin, unsigned int fout) +{ + unsigned char fl, fh, fi; + + /* prevent overflows */ + fin/=4; + fout/=4; + + fout*=12; + fi=fout/fin; + + fout=(fout%fin)*256; + fh=fout/fin; + + fout=(fout%fin)*256; + fl=fout/fin; + + btwrite(fl, BT848_PLL_F_LO); + btwrite(fh, BT848_PLL_F_HI); + btwrite(fi|BT848_PLL_X, BT848_PLL_XCI); +} + +static void set_pll(struct bttv *btv) +{ + int i; + + if (!btv->pll.pll_crystal) + return; + + if (btv->pll.pll_ofreq == btv->pll.pll_current) { + dprintk("%d: PLL: no change required\n", btv->c.nr); + return; + } + + if (btv->pll.pll_ifreq == btv->pll.pll_ofreq) { + /* no PLL needed */ + if (btv->pll.pll_current == 0) + return; + if (bttv_verbose) + pr_info("%d: PLL can sleep, using XTAL (%d)\n", + btv->c.nr, btv->pll.pll_ifreq); + btwrite(0x00,BT848_TGCTRL); + btwrite(0x00,BT848_PLL_XCI); + btv->pll.pll_current = 0; + return; + } + + if (bttv_verbose) + pr_info("%d: Setting PLL: %d => %d (needs up to 100ms)\n", + btv->c.nr, + btv->pll.pll_ifreq, btv->pll.pll_ofreq); + set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq); + + for (i=0; i<10; i++) { + /* Let other people run while the PLL stabilizes */ + msleep(10); + + if (btread(BT848_DSTATUS) & BT848_DSTATUS_PLOCK) { + btwrite(0,BT848_DSTATUS); + } else { + btwrite(0x08,BT848_TGCTRL); + btv->pll.pll_current = btv->pll.pll_ofreq; + if (bttv_verbose) + pr_info("PLL set ok\n"); + return; + } + } + btv->pll.pll_current = -1; + if (bttv_verbose) + pr_info("Setting PLL failed\n"); + return; +} + +/* used to switch between the bt848's analog/digital video capture modes */ +static void bt848A_set_timing(struct bttv *btv) +{ + int i, len; + int table_idx = bttv_tvnorms[btv->tvnorm].sram; + int fsc = bttv_tvnorms[btv->tvnorm].Fsc; + + if (btv->input == btv->dig) { + dprintk("%d: load digital timing table (table_idx=%d)\n", + btv->c.nr,table_idx); + + /* timing change...reset timing generator address */ + btwrite(0x00, BT848_TGCTRL); + btwrite(0x02, BT848_TGCTRL); + btwrite(0x00, BT848_TGCTRL); + + len=SRAM_Table[table_idx][0]; + for(i = 1; i <= len; i++) + btwrite(SRAM_Table[table_idx][i],BT848_TGLB); + btv->pll.pll_ofreq = 27000000; + + set_pll(btv); + btwrite(0x11, BT848_TGCTRL); + btwrite(0x41, BT848_DVSIF); + } else { + btv->pll.pll_ofreq = fsc; + set_pll(btv); + btwrite(0x0, BT848_DVSIF); + } +} + +/* ----------------------------------------------------------------------- */ + +static void bt848_bright(struct bttv *btv, int bright) +{ + int value; + + // printk("set bright: %d\n", bright); // DEBUG + btv->bright = bright; + + /* We want -128 to 127 we get 0-65535 */ + value = (bright >> 8) - 128; + btwrite(value & 0xff, BT848_BRIGHT); +} + +static void bt848_hue(struct bttv *btv, int hue) +{ + int value; + + btv->hue = hue; + + /* -128 to 127 */ + value = (hue >> 8) - 128; + btwrite(value & 0xff, BT848_HUE); +} + +static void bt848_contrast(struct bttv *btv, int cont) +{ + int value,hibit; + + btv->contrast = cont; + + /* 0-511 */ + value = (cont >> 7); + hibit = (value >> 6) & 4; + btwrite(value & 0xff, BT848_CONTRAST_LO); + btaor(hibit, ~4, BT848_E_CONTROL); + btaor(hibit, ~4, BT848_O_CONTROL); +} + +static void bt848_sat(struct bttv *btv, int color) +{ + int val_u,val_v,hibits; + + btv->saturation = color; + + /* 0-511 for the color */ + val_u = ((color * btv->opt_uv_ratio) / 50) >> 7; + val_v = (((color * (100 - btv->opt_uv_ratio) / 50) >>7)*180L)/254; + hibits = (val_u >> 7) & 2; + hibits |= (val_v >> 8) & 1; + btwrite(val_u & 0xff, BT848_SAT_U_LO); + btwrite(val_v & 0xff, BT848_SAT_V_LO); + btaor(hibits, ~3, BT848_E_CONTROL); + btaor(hibits, ~3, BT848_O_CONTROL); +} + +/* ----------------------------------------------------------------------- */ + +static int +video_mux(struct bttv *btv, unsigned int input) +{ + int mux,mask2; + + if (input >= bttv_tvcards[btv->c.type].video_inputs) + return -EINVAL; + + /* needed by RemoteVideo MX */ + mask2 = bttv_tvcards[btv->c.type].gpiomask2; + if (mask2) + gpio_inout(mask2,mask2); + + if (input == btv->svhs) { + btor(BT848_CONTROL_COMP, BT848_E_CONTROL); + btor(BT848_CONTROL_COMP, BT848_O_CONTROL); + } else { + btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); + btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); + } + mux = bttv_muxsel(btv, input); + btaor(mux<<5, ~(3<<5), BT848_IFORM); + dprintk("%d: video mux: input=%d mux=%d\n", btv->c.nr, input, mux); + + /* card specific hook */ + if(bttv_tvcards[btv->c.type].muxsel_hook) + bttv_tvcards[btv->c.type].muxsel_hook (btv, input); + return 0; +} + +static char *audio_modes[] = { + "audio: tuner", "audio: radio", "audio: extern", + "audio: intern", "audio: mute" +}; + +static void +audio_mux_gpio(struct bttv *btv, int input, int mute) +{ + int gpio_val, signal, mute_gpio; + + gpio_inout(bttv_tvcards[btv->c.type].gpiomask, + bttv_tvcards[btv->c.type].gpiomask); + signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC; + + /* automute */ + mute_gpio = mute || (btv->opt_automute && (!signal || !btv->users) + && !btv->has_radio_tuner); + + if (mute_gpio) + gpio_val = bttv_tvcards[btv->c.type].gpiomute; + else + gpio_val = bttv_tvcards[btv->c.type].gpiomux[input]; + + switch (btv->c.type) { + case BTTV_BOARD_VOODOOTV_FM: + case BTTV_BOARD_VOODOOTV_200: + gpio_val = bttv_tda9880_setnorm(btv, gpio_val); + break; + + default: + gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val); + } + + if (bttv_gpio) + bttv_gpio_tracking(btv, audio_modes[mute_gpio ? 4 : input]); +} + +static int +audio_mute(struct bttv *btv, int mute) +{ + struct v4l2_ctrl *ctrl; + + audio_mux_gpio(btv, btv->audio_input, mute); + + if (btv->sd_msp34xx) { + ctrl = v4l2_ctrl_find(btv->sd_msp34xx->ctrl_handler, V4L2_CID_AUDIO_MUTE); + if (ctrl) + v4l2_ctrl_s_ctrl(ctrl, mute); + } + if (btv->sd_tvaudio) { + ctrl = v4l2_ctrl_find(btv->sd_tvaudio->ctrl_handler, V4L2_CID_AUDIO_MUTE); + if (ctrl) + v4l2_ctrl_s_ctrl(ctrl, mute); + } + if (btv->sd_tda7432) { + ctrl = v4l2_ctrl_find(btv->sd_tda7432->ctrl_handler, V4L2_CID_AUDIO_MUTE); + if (ctrl) + v4l2_ctrl_s_ctrl(ctrl, mute); + } + return 0; +} + +static int +audio_input(struct bttv *btv, int input) +{ + audio_mux_gpio(btv, input, btv->mute); + + if (btv->sd_msp34xx) { + u32 in; + + /* Note: the inputs tuner/radio/extern/intern are translated + to msp routings. This assumes common behavior for all msp3400 + based TV cards. When this assumption fails, then the + specific MSP routing must be added to the card table. + For now this is sufficient. */ + switch (input) { + case TVAUDIO_INPUT_RADIO: + /* Some boards need the msp do to the radio demod */ + if (btv->radio_uses_msp_demodulator) { + in = MSP_INPUT_DEFAULT; + break; + } + in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); + break; + case TVAUDIO_INPUT_EXTERN: + in = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); + break; + case TVAUDIO_INPUT_INTERN: + /* Yes, this is the same input as for RADIO. I doubt + if this is ever used. The only board with an INTERN + input is the BTTV_BOARD_AVERMEDIA98. I wonder how + that was tested. My guess is that the whole INTERN + input does not work. */ + in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); + break; + case TVAUDIO_INPUT_TUNER: + default: + /* This is the only card that uses TUNER2, and afaik, + is the only difference between the VOODOOTV_FM + and VOODOOTV_200 */ + if (btv->c.type == BTTV_BOARD_VOODOOTV_200) + in = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER2, \ + MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER); + else + in = MSP_INPUT_DEFAULT; + break; + } + v4l2_subdev_call(btv->sd_msp34xx, audio, s_routing, + in, MSP_OUTPUT_DEFAULT, 0); + } + if (btv->sd_tvaudio) { + v4l2_subdev_call(btv->sd_tvaudio, audio, s_routing, + input, 0, 0); + } + return 0; +} + +static void +bttv_crop_calc_limits(struct bttv_crop *c) +{ + /* Scale factor min. 1:1, max. 16:1. Min. image size + 48 x 32. Scaled width must be a multiple of 4. */ + + if (1) { + /* For bug compatibility with VIDIOCGCAP and image + size checks in earlier driver versions. */ + c->min_scaled_width = 48; + c->min_scaled_height = 32; + } else { + c->min_scaled_width = + (max(48, c->rect.width >> 4) + 3) & ~3; + c->min_scaled_height = + max(32, c->rect.height >> 4); + } + + c->max_scaled_width = c->rect.width & ~3; + c->max_scaled_height = c->rect.height; +} + +static void +bttv_crop_reset(struct bttv_crop *c, unsigned int norm) +{ + c->rect = bttv_tvnorms[norm].cropcap.defrect; + bttv_crop_calc_limits(c); +} + +/* Call with btv->lock down. */ +static int +set_tvnorm(struct bttv *btv, unsigned int norm) +{ + const struct bttv_tvnorm *tvnorm; + v4l2_std_id id; + + BUG_ON(norm >= BTTV_TVNORMS); + BUG_ON(btv->tvnorm >= BTTV_TVNORMS); + + tvnorm = &bttv_tvnorms[norm]; + + if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, + sizeof (tvnorm->cropcap))) { + bttv_crop_reset(&btv->crop[0], norm); + btv->crop[1] = btv->crop[0]; /* current = default */ + + if (0 == (btv->resources & VIDEO_RESOURCES)) { + btv->crop_start = tvnorm->cropcap.bounds.top + + tvnorm->cropcap.bounds.height; + } + } + + btv->tvnorm = norm; + + btwrite(tvnorm->adelay, BT848_ADELAY); + btwrite(tvnorm->bdelay, BT848_BDELAY); + btaor(tvnorm->iform,~(BT848_IFORM_NORM|BT848_IFORM_XTBOTH), + BT848_IFORM); + btwrite(tvnorm->vbipack, BT848_VBI_PACK_SIZE); + btwrite(1, BT848_VBI_PACK_DEL); + bt848A_set_timing(btv); + + switch (btv->c.type) { + case BTTV_BOARD_VOODOOTV_FM: + case BTTV_BOARD_VOODOOTV_200: + bttv_tda9880_setnorm(btv, gpio_read()); + break; + } + id = tvnorm->v4l2_id; + bttv_call_all(btv, core, s_std, id); + + return 0; +} + +/* Call with btv->lock down. */ +static void +set_input(struct bttv *btv, unsigned int input, unsigned int norm) +{ + unsigned long flags; + + btv->input = input; + if (irq_iswitch) { + spin_lock_irqsave(&btv->s_lock,flags); + if (btv->curr.frame_irq) { + /* active capture -> delayed input switch */ + btv->new_input = input; + } else { + video_mux(btv,input); + } + spin_unlock_irqrestore(&btv->s_lock,flags); + } else { + video_mux(btv,input); + } + btv->audio_input = (btv->tuner_type != TUNER_ABSENT && input == 0) ? + TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN; + audio_input(btv, btv->audio_input); + set_tvnorm(btv, norm); +} + +static void init_irqreg(struct bttv *btv) +{ + /* clear status */ + btwrite(0xfffffUL, BT848_INT_STAT); + + if (bttv_tvcards[btv->c.type].no_video) { + /* i2c only */ + btwrite(BT848_INT_I2CDONE, + BT848_INT_MASK); + } else { + /* full video */ + btwrite((btv->triton1) | + (btv->gpioirq ? BT848_INT_GPINT : 0) | + BT848_INT_SCERR | + (fdsr ? BT848_INT_FDSR : 0) | + BT848_INT_RISCI | BT848_INT_OCERR | + BT848_INT_FMTCHG|BT848_INT_HLOCK| + BT848_INT_I2CDONE, + BT848_INT_MASK); + } +} + +static void init_bt848(struct bttv *btv) +{ + if (bttv_tvcards[btv->c.type].no_video) { + /* very basic init only */ + init_irqreg(btv); + return; + } + + btwrite(0x00, BT848_CAP_CTL); + btwrite(BT848_COLOR_CTL_GAMMA, BT848_COLOR_CTL); + btwrite(BT848_IFORM_XTAUTO | BT848_IFORM_AUTO, BT848_IFORM); + + /* set planar and packed mode trigger points and */ + /* set rising edge of inverted GPINTR pin as irq trigger */ + btwrite(BT848_GPIO_DMA_CTL_PKTP_32| + BT848_GPIO_DMA_CTL_PLTP1_16| + BT848_GPIO_DMA_CTL_PLTP23_16| + BT848_GPIO_DMA_CTL_GPINTC| + BT848_GPIO_DMA_CTL_GPINTI, + BT848_GPIO_DMA_CTL); + + btwrite(0x20, BT848_E_VSCALE_HI); + btwrite(0x20, BT848_O_VSCALE_HI); + + v4l2_ctrl_handler_setup(&btv->ctrl_handler); + + /* interrupt */ + init_irqreg(btv); +} + +static void bttv_reinit_bt848(struct bttv *btv) +{ + unsigned long flags; + + if (bttv_verbose) + pr_info("%d: reset, reinitialize\n", btv->c.nr); + spin_lock_irqsave(&btv->s_lock,flags); + btv->errors=0; + bttv_set_dma(btv,0); + spin_unlock_irqrestore(&btv->s_lock,flags); + + init_bt848(btv); + btv->pll.pll_current = -1; + set_input(btv, btv->input, btv->tvnorm); +} + +static int bttv_s_ctrl(struct v4l2_ctrl *c) +{ + struct bttv *btv = container_of(c->handler, struct bttv, ctrl_handler); + int val; + + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + bt848_bright(btv, c->val); + break; + case V4L2_CID_HUE: + bt848_hue(btv, c->val); + break; + case V4L2_CID_CONTRAST: + bt848_contrast(btv, c->val); + break; + case V4L2_CID_SATURATION: + bt848_sat(btv, c->val); + break; + case V4L2_CID_COLOR_KILLER: + if (c->val) { + btor(BT848_SCLOOP_CKILL, BT848_E_SCLOOP); + btor(BT848_SCLOOP_CKILL, BT848_O_SCLOOP); + } else { + btand(~BT848_SCLOOP_CKILL, BT848_E_SCLOOP); + btand(~BT848_SCLOOP_CKILL, BT848_O_SCLOOP); + } + break; + case V4L2_CID_AUDIO_MUTE: + audio_mute(btv, c->val); + btv->mute = c->val; + break; + case V4L2_CID_AUDIO_VOLUME: + btv->volume_gpio(btv, c->val); + break; + + case V4L2_CID_CHROMA_AGC: + val = c->val ? BT848_SCLOOP_CAGC : 0; + btwrite(val, BT848_E_SCLOOP); + btwrite(val, BT848_O_SCLOOP); + break; + case V4L2_CID_PRIVATE_COMBFILTER: + btv->opt_combfilter = c->val; + break; + case V4L2_CID_PRIVATE_LUMAFILTER: + if (c->val) { + btand(~BT848_CONTROL_LDEC, BT848_E_CONTROL); + btand(~BT848_CONTROL_LDEC, BT848_O_CONTROL); + } else { + btor(BT848_CONTROL_LDEC, BT848_E_CONTROL); + btor(BT848_CONTROL_LDEC, BT848_O_CONTROL); + } + break; + case V4L2_CID_PRIVATE_AUTOMUTE: + btv->opt_automute = c->val; + break; + case V4L2_CID_PRIVATE_AGC_CRUSH: + btwrite(BT848_ADC_RESERVED | + (c->val ? BT848_ADC_CRUSH : 0), + BT848_ADC); + break; + case V4L2_CID_PRIVATE_VCR_HACK: + btv->opt_vcr_hack = c->val; + break; + case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: + btwrite(c->val, BT848_WC_UP); + break; + case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: + btwrite(c->val, BT848_WC_DOWN); + break; + case V4L2_CID_PRIVATE_UV_RATIO: + btv->opt_uv_ratio = c->val; + bt848_sat(btv, btv->saturation); + break; + case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: + btaor((c->val << 7), ~BT848_OFORM_RANGE, BT848_OFORM); + break; + case V4L2_CID_PRIVATE_CORING: + btaor((c->val << 5), ~BT848_OFORM_CORE32, BT848_OFORM); + break; + default: + return -EINVAL; + } + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops bttv_ctrl_ops = { + .s_ctrl = bttv_s_ctrl, +}; + +static struct v4l2_ctrl_config bttv_ctrl_combfilter = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_COMBFILTER, + .name = "Comb Filter", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, + .def = 1, +}; + +static struct v4l2_ctrl_config bttv_ctrl_automute = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_AUTOMUTE, + .name = "Auto Mute", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, + .def = 1, +}; + +static struct v4l2_ctrl_config bttv_ctrl_lumafilter = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_LUMAFILTER, + .name = "Luma Decimation Filter", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, + .def = 1, +}; + +static struct v4l2_ctrl_config bttv_ctrl_agc_crush = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_AGC_CRUSH, + .name = "AGC Crush", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, + .def = 1, +}; + +static struct v4l2_ctrl_config bttv_ctrl_vcr_hack = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_VCR_HACK, + .name = "VCR Hack", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, + .def = 1, +}; + +static struct v4l2_ctrl_config bttv_ctrl_whitecrush_lower = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_WHITECRUSH_LOWER, + .name = "Whitecrush Lower", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 255, + .step = 1, + .def = 0x7f, +}; + +static struct v4l2_ctrl_config bttv_ctrl_whitecrush_upper = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_WHITECRUSH_UPPER, + .name = "Whitecrush Upper", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 255, + .step = 1, + .def = 0xcf, +}; + +static struct v4l2_ctrl_config bttv_ctrl_uv_ratio = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_UV_RATIO, + .name = "UV Ratio", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 100, + .step = 1, + .def = 50, +}; + +static struct v4l2_ctrl_config bttv_ctrl_full_luma = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_FULL_LUMA_RANGE, + .name = "Full Luma Range", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, +}; + +static struct v4l2_ctrl_config bttv_ctrl_coring = { + .ops = &bttv_ctrl_ops, + .id = V4L2_CID_PRIVATE_CORING, + .name = "Coring", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 3, + .step = 1, +}; + + +/* ----------------------------------------------------------------------- */ + +void bttv_gpio_tracking(struct bttv *btv, char *comment) +{ + unsigned int outbits, data; + outbits = btread(BT848_GPIO_OUT_EN); + data = btread(BT848_GPIO_DATA); + pr_debug("%d: gpio: en=%08x, out=%08x in=%08x [%s]\n", + btv->c.nr, outbits, data & outbits, data & ~outbits, comment); +} + +static void bttv_field_count(struct bttv *btv) +{ + int need_count = 0; + + if (btv->users) + need_count++; + + if (need_count) { + /* start field counter */ + btor(BT848_INT_VSYNC,BT848_INT_MASK); + } else { + /* stop field counter */ + btand(~BT848_INT_VSYNC,BT848_INT_MASK); + btv->field_count = 0; + } +} + +static const struct bttv_format* +format_by_fourcc(int fourcc) +{ + unsigned int i; + + for (i = 0; i < FORMATS; i++) { + if (-1 == formats[i].fourcc) + continue; + if (formats[i].fourcc == fourcc) + return formats+i; + } + return NULL; +} + +/* ----------------------------------------------------------------------- */ +/* misc helpers */ + +static int +bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh, + struct bttv_buffer *new) +{ + struct bttv_buffer *old; + unsigned long flags; + int retval = 0; + + dprintk("switch_overlay: enter [new=%p]\n", new); + if (new) + new->vb.state = VIDEOBUF_DONE; + spin_lock_irqsave(&btv->s_lock,flags); + old = btv->screen; + btv->screen = new; + btv->loop_irq |= 1; + bttv_set_dma(btv, 0x03); + spin_unlock_irqrestore(&btv->s_lock,flags); + if (NULL != old) { + dprintk("switch_overlay: old=%p state is %d\n", + old, old->vb.state); + bttv_dma_free(&fh->cap,btv, old); + kfree(old); + } + if (NULL == new) + free_btres_lock(btv,fh,RESOURCE_OVERLAY); + dprintk("switch_overlay: done\n"); + return retval; +} + +/* ----------------------------------------------------------------------- */ +/* video4linux (1) interface */ + +static int bttv_prepare_buffer(struct videobuf_queue *q,struct bttv *btv, + struct bttv_buffer *buf, + const struct bttv_format *fmt, + unsigned int width, unsigned int height, + enum v4l2_field field) +{ + struct bttv_fh *fh = q->priv_data; + int redo_dma_risc = 0; + struct bttv_crop c; + int norm; + int rc; + + /* check settings */ + if (NULL == fmt) + return -EINVAL; + if (fmt->btformat == BT848_COLOR_FMT_RAW) { + width = RAW_BPL; + height = RAW_LINES*2; + if (width*height > buf->vb.bsize) + return -EINVAL; + buf->vb.size = buf->vb.bsize; + + /* Make sure tvnorm and vbi_end remain consistent + until we're done. */ + + norm = btv->tvnorm; + + /* In this mode capturing always starts at defrect.top + (default VDELAY), ignoring cropping parameters. */ + if (btv->vbi_end > bttv_tvnorms[norm].cropcap.defrect.top) { + return -EINVAL; + } + + c.rect = bttv_tvnorms[norm].cropcap.defrect; + } else { + norm = btv->tvnorm; + c = btv->crop[!!fh->do_crop]; + + if (width < c.min_scaled_width || + width > c.max_scaled_width || + height < c.min_scaled_height) + return -EINVAL; + + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_ALTERNATE: + /* btv->crop counts frame lines. Max. scale + factor is 16:1 for frames, 8:1 for fields. */ + if (height * 2 > c.max_scaled_height) + return -EINVAL; + break; + + default: + if (height > c.max_scaled_height) + return -EINVAL; + break; + } + + buf->vb.size = (width * height * fmt->depth) >> 3; + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + } + + /* alloc + fill struct bttv_buffer (if changed) */ + if (buf->vb.width != width || buf->vb.height != height || + buf->vb.field != field || + buf->tvnorm != norm || buf->fmt != fmt || + buf->crop.top != c.rect.top || + buf->crop.left != c.rect.left || + buf->crop.width != c.rect.width || + buf->crop.height != c.rect.height) { + buf->vb.width = width; + buf->vb.height = height; + buf->vb.field = field; + buf->tvnorm = norm; + buf->fmt = fmt; + buf->crop = c.rect; + redo_dma_risc = 1; + } + + /* alloc risc memory */ + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + redo_dma_risc = 1; + if (0 != (rc = videobuf_iolock(q,&buf->vb,&btv->fbuf))) + goto fail; + } + + if (redo_dma_risc) + if (0 != (rc = bttv_buffer_risc(btv,buf))) + goto fail; + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + bttv_dma_free(q,btv,buf); + return rc; +} + +static int +buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + struct bttv_fh *fh = q->priv_data; + + *size = fh->fmt->depth*fh->width*fh->height >> 3; + if (0 == *count) + *count = gbuffers; + if (*size * *count > gbuffers * gbufsize) + *count = (gbuffers * gbufsize) / *size; + return 0; +} + +static int +buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); + struct bttv_fh *fh = q->priv_data; + + return bttv_prepare_buffer(q,fh->btv, buf, fh->fmt, + fh->width, fh->height, field); +} + +static void +buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); + struct bttv_fh *fh = q->priv_data; + struct bttv *btv = fh->btv; + + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue,&btv->capture); + if (!btv->curr.frame_irq) { + btv->loop_irq |= 1; + bttv_set_dma(btv, 0x03); + } +} + +static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); + struct bttv_fh *fh = q->priv_data; + + bttv_dma_free(q,fh->btv,buf); +} + +static struct videobuf_queue_ops bttv_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +static void radio_enable(struct bttv *btv) +{ + /* Switch to the radio tuner */ + if (!btv->has_radio_tuner) { + btv->has_radio_tuner = 1; + bttv_call_all(btv, tuner, s_radio); + btv->audio_input = TVAUDIO_INPUT_RADIO; + audio_input(btv, btv->audio_input); + } +} + +static int bttv_s_std(struct file *file, void *priv, v4l2_std_id id) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + unsigned int i; + int err = 0; + + for (i = 0; i < BTTV_TVNORMS; i++) + if (id & bttv_tvnorms[i].v4l2_id) + break; + if (i == BTTV_TVNORMS) { + err = -EINVAL; + goto err; + } + + btv->std = id; + set_tvnorm(btv, i); + +err: + + return err; +} + +static int bttv_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + *id = btv->std; + return 0; +} + +static int bttv_querystd(struct file *file, void *f, v4l2_std_id *id) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + if (btread(BT848_DSTATUS) & BT848_DSTATUS_NUML) + *id = V4L2_STD_625_50; + else + *id = V4L2_STD_525_60; + return 0; +} + +static int bttv_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int rc = 0; + + if (i->index >= bttv_tvcards[btv->c.type].video_inputs) { + rc = -EINVAL; + goto err; + } + + i->type = V4L2_INPUT_TYPE_CAMERA; + i->audioset = 0; + + if (btv->tuner_type != TUNER_ABSENT && i->index == 0) { + sprintf(i->name, "Television"); + i->type = V4L2_INPUT_TYPE_TUNER; + i->tuner = 0; + } else if (i->index == btv->svhs) { + sprintf(i->name, "S-Video"); + } else { + sprintf(i->name, "Composite%d", i->index); + } + + if (i->index == btv->input) { + __u32 dstatus = btread(BT848_DSTATUS); + if (0 == (dstatus & BT848_DSTATUS_PRES)) + i->status |= V4L2_IN_ST_NO_SIGNAL; + if (0 == (dstatus & BT848_DSTATUS_HLOC)) + i->status |= V4L2_IN_ST_NO_H_LOCK; + } + + i->std = BTTV_NORMS; + +err: + + return rc; +} + +static int bttv_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + *i = btv->input; + + return 0; +} + +static int bttv_s_input(struct file *file, void *priv, unsigned int i) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (i >= bttv_tvcards[btv->c.type].video_inputs) + return -EINVAL; + + set_input(btv, i, btv->tvnorm); + return 0; +} + +static int bttv_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (t->index) + return -EINVAL; + + bttv_call_all(btv, tuner, s_tuner, t); + + if (btv->audio_mode_gpio) { + struct v4l2_tuner copy = *t; + + btv->audio_mode_gpio(btv, ©, 1); + } + return 0; +} + +static int bttv_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (f->tuner) + return -EINVAL; + + if (f->type == V4L2_TUNER_RADIO) + radio_enable(btv); + f->frequency = f->type == V4L2_TUNER_RADIO ? + btv->radio_freq : btv->tv_freq; + + return 0; +} + +static void bttv_set_frequency(struct bttv *btv, const struct v4l2_frequency *f) +{ + struct v4l2_frequency new_freq = *f; + + bttv_call_all(btv, tuner, s_frequency, f); + /* s_frequency may clamp the frequency, so get the actual + frequency before assigning radio/tv_freq. */ + bttv_call_all(btv, tuner, g_frequency, &new_freq); + if (new_freq.type == V4L2_TUNER_RADIO) { + radio_enable(btv); + btv->radio_freq = new_freq.frequency; + if (btv->has_matchbox) + tea5757_set_freq(btv, btv->radio_freq); + } else { + btv->tv_freq = new_freq.frequency; + } +} + +static int bttv_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (f->tuner) + return -EINVAL; + + bttv_set_frequency(btv, f); + return 0; +} + +static int bttv_log_status(struct file *file, void *f) +{ + struct video_device *vdev = video_devdata(file); + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + v4l2_ctrl_handler_log_status(vdev->ctrl_handler, btv->c.v4l2_dev.name); + bttv_call_all(btv, core, log_status); + return 0; +} + +static int bttv_g_chip_ident(struct file *file, void *f, struct v4l2_dbg_chip_ident *chip) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type == V4L2_CHIP_MATCH_HOST) { + if (v4l2_chip_match_host(&chip->match)) { + chip->ident = btv->id; + if (chip->ident == PCI_DEVICE_ID_FUSION879) + chip->ident = V4L2_IDENT_BT879; + } + return 0; + } + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + /* TODO: is this correct? */ + return bttv_call_all_err(btv, core, g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int bttv_g_register(struct file *file, void *f, + struct v4l2_dbg_register *reg) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (!v4l2_chip_match_host(®->match)) { + /* TODO: subdev errors should not be ignored, this should become a + subdev helper function. */ + bttv_call_all(btv, core, g_register, reg); + return 0; + } + + /* bt848 has a 12-bit register space */ + reg->reg &= 0xfff; + reg->val = btread(reg->reg); + reg->size = 1; + + return 0; +} + +static int bttv_s_register(struct file *file, void *f, + const struct v4l2_dbg_register *reg) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (!v4l2_chip_match_host(®->match)) { + /* TODO: subdev errors should not be ignored, this should become a + subdev helper function. */ + bttv_call_all(btv, core, s_register, reg); + return 0; + } + + /* bt848 has a 12-bit register space */ + btwrite(reg->val, reg->reg & 0xfff); + + return 0; +} +#endif + +/* Given cropping boundaries b and the scaled width and height of a + single field or frame, which must not exceed hardware limits, this + function adjusts the cropping parameters c. */ +static void +bttv_crop_adjust (struct bttv_crop * c, + const struct v4l2_rect * b, + __s32 width, + __s32 height, + enum v4l2_field field) +{ + __s32 frame_height = height << !V4L2_FIELD_HAS_BOTH(field); + __s32 max_left; + __s32 max_top; + + if (width < c->min_scaled_width) { + /* Max. hor. scale factor 16:1. */ + c->rect.width = width * 16; + } else if (width > c->max_scaled_width) { + /* Min. hor. scale factor 1:1. */ + c->rect.width = width; + + max_left = b->left + b->width - width; + max_left = min(max_left, (__s32) MAX_HDELAY); + if (c->rect.left > max_left) + c->rect.left = max_left; + } + + if (height < c->min_scaled_height) { + /* Max. vert. scale factor 16:1, single fields 8:1. */ + c->rect.height = height * 16; + } else if (frame_height > c->max_scaled_height) { + /* Min. vert. scale factor 1:1. + Top and height count field lines times two. */ + c->rect.height = (frame_height + 1) & ~1; + + max_top = b->top + b->height - c->rect.height; + if (c->rect.top > max_top) + c->rect.top = max_top; + } + + bttv_crop_calc_limits(c); +} + +/* Returns an error if scaling to a frame or single field with the given + width and height is not possible with the current cropping parameters + and width aligned according to width_mask. If adjust_size is TRUE the + function may adjust the width and/or height instead, rounding width + to (width + width_bias) & width_mask. If adjust_crop is TRUE it may + also adjust the current cropping parameters to get closer to the + desired image size. */ +static int +limit_scaled_size_lock (struct bttv_fh * fh, + __s32 * width, + __s32 * height, + enum v4l2_field field, + unsigned int width_mask, + unsigned int width_bias, + int adjust_size, + int adjust_crop) +{ + struct bttv *btv = fh->btv; + const struct v4l2_rect *b; + struct bttv_crop *c; + __s32 min_width; + __s32 min_height; + __s32 max_width; + __s32 max_height; + int rc; + + BUG_ON((int) width_mask >= 0 || + width_bias >= (unsigned int) -width_mask); + + /* Make sure tvnorm, vbi_end and the current cropping parameters + remain consistent until we're done. */ + + b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds; + + /* Do crop - use current, don't - use default parameters. */ + c = &btv->crop[!!fh->do_crop]; + + if (fh->do_crop + && adjust_size + && adjust_crop + && !locked_btres(btv, VIDEO_RESOURCES)) { + min_width = 48; + min_height = 32; + + /* We cannot scale up. When the scaled image is larger + than crop.rect we adjust the crop.rect as required + by the V4L2 spec, hence cropcap.bounds are our limit. */ + max_width = min(b->width, (__s32) MAX_HACTIVE); + max_height = b->height; + + /* We cannot capture the same line as video and VBI data. + Note btv->vbi_end is really a minimum, see + bttv_vbi_try_fmt(). */ + if (btv->vbi_end > b->top) { + max_height -= btv->vbi_end - b->top; + rc = -EBUSY; + if (min_height > max_height) + goto fail; + } + } else { + rc = -EBUSY; + if (btv->vbi_end > c->rect.top) + goto fail; + + min_width = c->min_scaled_width; + min_height = c->min_scaled_height; + max_width = c->max_scaled_width; + max_height = c->max_scaled_height; + + adjust_crop = 0; + } + + min_width = (min_width - width_mask - 1) & width_mask; + max_width = max_width & width_mask; + + /* Max. scale factor is 16:1 for frames, 8:1 for fields. */ + min_height = min_height; + /* Min. scale factor is 1:1. */ + max_height >>= !V4L2_FIELD_HAS_BOTH(field); + + if (adjust_size) { + *width = clamp(*width, min_width, max_width); + *height = clamp(*height, min_height, max_height); + + /* Round after clamping to avoid overflow. */ + *width = (*width + width_bias) & width_mask; + + if (adjust_crop) { + bttv_crop_adjust(c, b, *width, *height, field); + + if (btv->vbi_end > c->rect.top) { + /* Move the crop window out of the way. */ + c->rect.top = btv->vbi_end; + } + } + } else { + rc = -EINVAL; + if (*width < min_width || + *height < min_height || + *width > max_width || + *height > max_height || + 0 != (*width & ~width_mask)) + goto fail; + } + + rc = 0; /* success */ + + fail: + + return rc; +} + +/* Returns an error if the given overlay window dimensions are not + possible with the current cropping parameters. If adjust_size is + TRUE the function may adjust the window width and/or height + instead, however it always rounds the horizontal position and + width as btcx_align() does. If adjust_crop is TRUE the function + may also adjust the current cropping parameters to get closer + to the desired window size. */ +static int +verify_window_lock(struct bttv_fh *fh, struct v4l2_window *win, + int adjust_size, int adjust_crop) +{ + enum v4l2_field field; + unsigned int width_mask; + int rc; + + if (win->w.width < 48) + win->w.width = 48; + if (win->w.height < 32) + win->w.height = 32; + if (win->clipcount > 2048) + win->clipcount = 2048; + + win->chromakey = 0; + win->global_alpha = 0; + field = win->field; + + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_INTERLACED: + break; + default: + field = V4L2_FIELD_ANY; + break; + } + if (V4L2_FIELD_ANY == field) { + __s32 height2; + + height2 = fh->btv->crop[!!fh->do_crop].rect.height >> 1; + field = (win->w.height > height2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_TOP; + } + win->field = field; + + if (NULL == fh->ovfmt) + return -EINVAL; + /* 4-byte alignment. */ + width_mask = ~0; + switch (fh->ovfmt->depth) { + case 8: + case 24: + width_mask = ~3; + break; + case 16: + width_mask = ~1; + break; + case 32: + break; + default: + BUG(); + } + + win->w.width -= win->w.left & ~width_mask; + win->w.left = (win->w.left - width_mask - 1) & width_mask; + + rc = limit_scaled_size_lock(fh, &win->w.width, &win->w.height, + field, width_mask, + /* width_bias: round down */ 0, + adjust_size, adjust_crop); + if (0 != rc) + return rc; + return 0; +} + +static int setup_window_lock(struct bttv_fh *fh, struct bttv *btv, + struct v4l2_window *win, int fixup) +{ + struct v4l2_clip *clips = NULL; + int n,size,retval = 0; + + if (NULL == fh->ovfmt) + return -EINVAL; + if (!(fh->ovfmt->flags & FORMAT_FLAGS_PACKED)) + return -EINVAL; + retval = verify_window_lock(fh, win, + /* adjust_size */ fixup, + /* adjust_crop */ fixup); + if (0 != retval) + return retval; + + /* copy clips -- luckily v4l1 + v4l2 are binary + compatible here ...*/ + n = win->clipcount; + size = sizeof(*clips)*(n+4); + clips = kmalloc(size,GFP_KERNEL); + if (NULL == clips) + return -ENOMEM; + if (n > 0) { + if (copy_from_user(clips,win->clips,sizeof(struct v4l2_clip)*n)) { + kfree(clips); + return -EFAULT; + } + } + + /* clip against screen */ + if (NULL != btv->fbuf.base) + n = btcx_screen_clips(btv->fbuf.fmt.width, btv->fbuf.fmt.height, + &win->w, clips, n); + btcx_sort_clips(clips,n); + + /* 4-byte alignments */ + switch (fh->ovfmt->depth) { + case 8: + case 24: + btcx_align(&win->w, clips, n, 3); + break; + case 16: + btcx_align(&win->w, clips, n, 1); + break; + case 32: + /* no alignment fixups needed */ + break; + default: + BUG(); + } + + kfree(fh->ov.clips); + fh->ov.clips = clips; + fh->ov.nclips = n; + + fh->ov.w = win->w; + fh->ov.field = win->field; + fh->ov.setup_ok = 1; + + btv->init.ov.w.width = win->w.width; + btv->init.ov.w.height = win->w.height; + btv->init.ov.field = win->field; + + /* update overlay if needed */ + retval = 0; + if (check_btres(fh, RESOURCE_OVERLAY)) { + struct bttv_buffer *new; + + new = videobuf_sg_alloc(sizeof(*new)); + new->crop = btv->crop[!!fh->do_crop].rect; + bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); + retval = bttv_switch_overlay(btv,fh,new); + } + return retval; +} + +/* ----------------------------------------------------------------------- */ + +static struct videobuf_queue* bttv_queue(struct bttv_fh *fh) +{ + struct videobuf_queue* q = NULL; + + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + q = &fh->cap; + break; + case V4L2_BUF_TYPE_VBI_CAPTURE: + q = &fh->vbi; + break; + default: + BUG(); + } + return q; +} + +static int bttv_resource(struct bttv_fh *fh) +{ + int res = 0; + + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + res = RESOURCE_VIDEO_STREAM; + break; + case V4L2_BUF_TYPE_VBI_CAPTURE: + res = RESOURCE_VBI; + break; + default: + BUG(); + } + return res; +} + +static int bttv_switch_type(struct bttv_fh *fh, enum v4l2_buf_type type) +{ + struct videobuf_queue *q = bttv_queue(fh); + int res = bttv_resource(fh); + + if (check_btres(fh,res)) + return -EBUSY; + if (videobuf_queue_is_busy(q)) + return -EBUSY; + fh->type = type; + return 0; +} + +static void +pix_format_set_size (struct v4l2_pix_format * f, + const struct bttv_format * fmt, + unsigned int width, + unsigned int height) +{ + f->width = width; + f->height = height; + + if (fmt->flags & FORMAT_FLAGS_PLANAR) { + f->bytesperline = width; /* Y plane */ + f->sizeimage = (width * height * fmt->depth) >> 3; + } else { + f->bytesperline = (width * fmt->depth) >> 3; + f->sizeimage = height * f->bytesperline; + } +} + +static int bttv_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct bttv_fh *fh = priv; + + pix_format_set_size(&f->fmt.pix, fh->fmt, + fh->width, fh->height); + f->fmt.pix.field = fh->cap.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + + return 0; +} + +static int bttv_g_fmt_vid_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct bttv_fh *fh = priv; + + f->fmt.win.w = fh->ov.w; + f->fmt.win.field = fh->ov.field; + + return 0; +} + +static int bttv_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + const struct bttv_format *fmt; + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + enum v4l2_field field; + __s32 width, height; + __s32 height2; + int rc; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + + field = f->fmt.pix.field; + + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_ALTERNATE: + case V4L2_FIELD_INTERLACED: + break; + case V4L2_FIELD_SEQ_BT: + case V4L2_FIELD_SEQ_TB: + if (!(fmt->flags & FORMAT_FLAGS_PLANAR)) { + field = V4L2_FIELD_SEQ_TB; + break; + } + /* fall through */ + default: /* FIELD_ANY case */ + height2 = btv->crop[!!fh->do_crop].rect.height >> 1; + field = (f->fmt.pix.height > height2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; + break; + } + + width = f->fmt.pix.width; + height = f->fmt.pix.height; + + rc = limit_scaled_size_lock(fh, &width, &height, field, + /* width_mask: 4 pixels */ ~3, + /* width_bias: nearest */ 2, + /* adjust_size */ 1, + /* adjust_crop */ 0); + if (0 != rc) + return rc; + + /* update data for the application */ + f->fmt.pix.field = field; + pix_format_set_size(&f->fmt.pix, fmt, width, height); + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + + return 0; +} + +static int bttv_try_fmt_vid_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct bttv_fh *fh = priv; + + verify_window_lock(fh, &f->fmt.win, + /* adjust_size */ 1, + /* adjust_crop */ 0); + return 0; +} + +static int bttv_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int retval; + const struct bttv_format *fmt; + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + __s32 width, height; + enum v4l2_field field; + + retval = bttv_switch_type(fh, f->type); + if (0 != retval) + return retval; + + retval = bttv_try_fmt_vid_cap(file, priv, f); + if (0 != retval) + return retval; + + width = f->fmt.pix.width; + height = f->fmt.pix.height; + field = f->fmt.pix.field; + + retval = limit_scaled_size_lock(fh, &width, &height, f->fmt.pix.field, + /* width_mask: 4 pixels */ ~3, + /* width_bias: nearest */ 2, + /* adjust_size */ 1, + /* adjust_crop */ 1); + if (0 != retval) + return retval; + + f->fmt.pix.field = field; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + + /* update our state informations */ + fh->fmt = fmt; + fh->cap.field = f->fmt.pix.field; + fh->cap.last = V4L2_FIELD_NONE; + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + btv->init.fmt = fmt; + btv->init.width = f->fmt.pix.width; + btv->init.height = f->fmt.pix.height; + + return 0; +} + +static int bttv_s_fmt_vid_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (no_overlay > 0) { + pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } + + return setup_window_lock(fh, btv, &f->fmt.win, 1); +} + +static int bttv_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct video_device *vdev = video_devdata(file); + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (0 == v4l2) + return -EINVAL; + + strlcpy(cap->driver, "bttv", sizeof(cap->driver)); + strlcpy(cap->card, btv->video_dev->name, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "PCI:%s", pci_name(btv->c.pci)); + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + V4L2_CAP_DEVICE_CAPS; + if (no_overlay <= 0) + cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; + if (btv->vbi_dev) + cap->capabilities |= V4L2_CAP_VBI_CAPTURE; + if (btv->radio_dev) + cap->capabilities |= V4L2_CAP_RADIO; + + /* + * No need to lock here: those vars are initialized during board + * probe and remains untouched during the rest of the driver lifecycle + */ + if (btv->has_saa6588) + cap->capabilities |= V4L2_CAP_RDS_CAPTURE; + if (btv->tuner_type != TUNER_ABSENT) + cap->capabilities |= V4L2_CAP_TUNER; + if (vdev->vfl_type == VFL_TYPE_GRABBER) + cap->device_caps = cap->capabilities & + (V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + V4L2_CAP_VIDEO_OVERLAY | + V4L2_CAP_TUNER); + else if (vdev->vfl_type == VFL_TYPE_VBI) + cap->device_caps = cap->capabilities & + (V4L2_CAP_VBI_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + V4L2_CAP_TUNER); + else { + cap->device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER; + if (btv->has_saa6588) + cap->device_caps |= V4L2_CAP_READWRITE | + V4L2_CAP_RDS_CAPTURE; + } + return 0; +} + +static int bttv_enum_fmt_cap_ovr(struct v4l2_fmtdesc *f) +{ + int index = -1, i; + + for (i = 0; i < FORMATS; i++) { + if (formats[i].fourcc != -1) + index++; + if ((unsigned int)index == f->index) + break; + } + if (FORMATS == i) + return -EINVAL; + + f->pixelformat = formats[i].fourcc; + strlcpy(f->description, formats[i].name, sizeof(f->description)); + + return i; +} + +static int bttv_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + int rc = bttv_enum_fmt_cap_ovr(f); + + if (rc < 0) + return rc; + + return 0; +} + +static int bttv_enum_fmt_vid_overlay(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + int rc; + + if (no_overlay > 0) { + pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } + + rc = bttv_enum_fmt_cap_ovr(f); + + if (rc < 0) + return rc; + + if (!(formats[rc].flags & FORMAT_FLAGS_PACKED)) + return -EINVAL; + + return 0; +} + +static int bttv_g_fbuf(struct file *file, void *f, + struct v4l2_framebuffer *fb) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + *fb = btv->fbuf; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; + fb->flags = V4L2_FBUF_FLAG_PRIMARY; + if (fh->ovfmt) + fb->fmt.pixelformat = fh->ovfmt->fourcc; + return 0; +} + +static int bttv_overlay(struct file *file, void *f, unsigned int on) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + struct bttv_buffer *new; + int retval = 0; + + if (on) { + /* verify args */ + if (unlikely(!btv->fbuf.base)) { + return -EINVAL; + } + if (unlikely(!fh->ov.setup_ok)) { + dprintk("%d: overlay: !setup_ok\n", btv->c.nr); + retval = -EINVAL; + } + if (retval) + return retval; + } + + if (!check_alloc_btres_lock(btv, fh, RESOURCE_OVERLAY)) + return -EBUSY; + + if (on) { + fh->ov.tvnorm = btv->tvnorm; + new = videobuf_sg_alloc(sizeof(*new)); + new->crop = btv->crop[!!fh->do_crop].rect; + bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); + } else { + new = NULL; + } + + /* switch over */ + retval = bttv_switch_overlay(btv, fh, new); + return retval; +} + +static int bttv_s_fbuf(struct file *file, void *f, + const struct v4l2_framebuffer *fb) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + const struct bttv_format *fmt; + int retval; + + if (!capable(CAP_SYS_ADMIN) && + !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* check args */ + fmt = format_by_fourcc(fb->fmt.pixelformat); + if (NULL == fmt) + return -EINVAL; + if (0 == (fmt->flags & FORMAT_FLAGS_PACKED)) + return -EINVAL; + + retval = -EINVAL; + if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { + __s32 width = fb->fmt.width; + __s32 height = fb->fmt.height; + + retval = limit_scaled_size_lock(fh, &width, &height, + V4L2_FIELD_INTERLACED, + /* width_mask */ ~3, + /* width_bias */ 2, + /* adjust_size */ 0, + /* adjust_crop */ 0); + if (0 != retval) + return retval; + } + + /* ok, accept it */ + btv->fbuf.base = fb->base; + btv->fbuf.fmt.width = fb->fmt.width; + btv->fbuf.fmt.height = fb->fmt.height; + if (0 != fb->fmt.bytesperline) + btv->fbuf.fmt.bytesperline = fb->fmt.bytesperline; + else + btv->fbuf.fmt.bytesperline = btv->fbuf.fmt.width*fmt->depth/8; + + retval = 0; + fh->ovfmt = fmt; + btv->init.ovfmt = fmt; + if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { + fh->ov.w.left = 0; + fh->ov.w.top = 0; + fh->ov.w.width = fb->fmt.width; + fh->ov.w.height = fb->fmt.height; + btv->init.ov.w.width = fb->fmt.width; + btv->init.ov.w.height = fb->fmt.height; + kfree(fh->ov.clips); + fh->ov.clips = NULL; + fh->ov.nclips = 0; + + if (check_btres(fh, RESOURCE_OVERLAY)) { + struct bttv_buffer *new; + + new = videobuf_sg_alloc(sizeof(*new)); + new->crop = btv->crop[!!fh->do_crop].rect; + bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); + retval = bttv_switch_overlay(btv, fh, new); + } + } + return retval; +} + +static int bttv_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct bttv_fh *fh = priv; + return videobuf_reqbufs(bttv_queue(fh), p); +} + +static int bttv_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct bttv_fh *fh = priv; + return videobuf_querybuf(bttv_queue(fh), b); +} + +static int bttv_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int res = bttv_resource(fh); + + if (!check_alloc_btres_lock(btv, fh, res)) + return -EBUSY; + + return videobuf_qbuf(bttv_queue(fh), b); +} + +static int bttv_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct bttv_fh *fh = priv; + return videobuf_dqbuf(bttv_queue(fh), b, + file->f_flags & O_NONBLOCK); +} + +static int bttv_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int res = bttv_resource(fh); + + if (!check_alloc_btres_lock(btv, fh, res)) + return -EBUSY; + return videobuf_streamon(bttv_queue(fh)); +} + + +static int bttv_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int retval; + int res = bttv_resource(fh); + + + retval = videobuf_streamoff(bttv_queue(fh)); + if (retval < 0) + return retval; + free_btres_lock(btv, fh, res); + return 0; +} + +static int bttv_g_parm(struct file *file, void *f, + struct v4l2_streamparm *parm) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + parm->parm.capture.readbuffers = gbuffers; + v4l2_video_std_frame_period(bttv_tvnorms[btv->tvnorm].v4l2_id, + &parm->parm.capture.timeperframe); + + return 0; +} + +static int bttv_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (0 != t->index) + return -EINVAL; + + t->rxsubchans = V4L2_TUNER_SUB_MONO; + t->capability = V4L2_TUNER_CAP_NORM; + bttv_call_all(btv, tuner, g_tuner, t); + strcpy(t->name, "Television"); + t->type = V4L2_TUNER_ANALOG_TV; + if (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC) + t->signal = 0xffff; + + if (btv->audio_mode_gpio) + btv->audio_mode_gpio(btv, t, 0); + + return 0; +} + +static int bttv_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cap) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + + *cap = bttv_tvnorms[btv->tvnorm].cropcap; + + return 0; +} + +static int bttv_g_crop(struct file *file, void *f, struct v4l2_crop *crop) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + + /* No fh->do_crop = 1; because btv->crop[1] may be + inconsistent with fh->width or fh->height and apps + do not expect a change here. */ + + crop->c = btv->crop[!!fh->do_crop].rect; + + return 0; +} + +static int bttv_s_crop(struct file *file, void *f, const struct v4l2_crop *crop) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + const struct v4l2_rect *b; + int retval; + struct bttv_crop c; + __s32 b_left; + __s32 b_top; + __s32 b_right; + __s32 b_bottom; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + + /* Make sure tvnorm, vbi_end and the current cropping + parameters remain consistent until we're done. Note + read() may change vbi_end in check_alloc_btres_lock(). */ + retval = -EBUSY; + + if (locked_btres(fh->btv, VIDEO_RESOURCES)) { + return retval; + } + + b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds; + + b_left = b->left; + b_right = b_left + b->width; + b_bottom = b->top + b->height; + + b_top = max(b->top, btv->vbi_end); + if (b_top + 32 >= b_bottom) { + return retval; + } + + /* Min. scaled size 48 x 32. */ + c.rect.left = clamp_t(s32, crop->c.left, b_left, b_right - 48); + c.rect.left = min(c.rect.left, (__s32) MAX_HDELAY); + + c.rect.width = clamp_t(s32, crop->c.width, + 48, b_right - c.rect.left); + + c.rect.top = clamp_t(s32, crop->c.top, b_top, b_bottom - 32); + /* Top and height must be a multiple of two. */ + c.rect.top = (c.rect.top + 1) & ~1; + + c.rect.height = clamp_t(s32, crop->c.height, + 32, b_bottom - c.rect.top); + c.rect.height = (c.rect.height + 1) & ~1; + + bttv_crop_calc_limits(&c); + + btv->crop[1] = c; + + fh->do_crop = 1; + + if (fh->width < c.min_scaled_width) { + fh->width = c.min_scaled_width; + btv->init.width = c.min_scaled_width; + } else if (fh->width > c.max_scaled_width) { + fh->width = c.max_scaled_width; + btv->init.width = c.max_scaled_width; + } + + if (fh->height < c.min_scaled_height) { + fh->height = c.min_scaled_height; + btv->init.height = c.min_scaled_height; + } else if (fh->height > c.max_scaled_height) { + fh->height = c.max_scaled_height; + btv->init.height = c.max_scaled_height; + } + + return 0; +} + +static ssize_t bttv_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct bttv_fh *fh = file->private_data; + int retval = 0; + + if (fh->btv->errors) + bttv_reinit_bt848(fh->btv); + dprintk("%d: read count=%d type=%s\n", + fh->btv->c.nr, (int)count, v4l2_type_names[fh->type]); + + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (!check_alloc_btres_lock(fh->btv, fh, RESOURCE_VIDEO_READ)) { + /* VIDEO_READ in use by another fh, + or VIDEO_STREAM by any fh. */ + return -EBUSY; + } + retval = videobuf_read_one(&fh->cap, data, count, ppos, + file->f_flags & O_NONBLOCK); + free_btres_lock(fh->btv, fh, RESOURCE_VIDEO_READ); + break; + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (!check_alloc_btres_lock(fh->btv,fh,RESOURCE_VBI)) + return -EBUSY; + retval = videobuf_read_stream(&fh->vbi, data, count, ppos, 1, + file->f_flags & O_NONBLOCK); + break; + default: + BUG(); + } + return retval; +} + +static unsigned int bttv_poll(struct file *file, poll_table *wait) +{ + struct bttv_fh *fh = file->private_data; + struct bttv_buffer *buf; + enum v4l2_field field; + unsigned int rc = 0; + unsigned long req_events = poll_requested_events(wait); + + if (v4l2_event_pending(&fh->fh)) + rc = POLLPRI; + else if (req_events & POLLPRI) + poll_wait(file, &fh->fh.wait, wait); + + if (!(req_events & (POLLIN | POLLRDNORM))) + return rc; + + if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { + if (!check_alloc_btres_lock(fh->btv,fh,RESOURCE_VBI)) + return rc | POLLERR; + return rc | videobuf_poll_stream(file, &fh->vbi, wait); + } + + if (check_btres(fh,RESOURCE_VIDEO_STREAM)) { + /* streaming capture */ + if (list_empty(&fh->cap.stream)) + return rc | POLLERR; + buf = list_entry(fh->cap.stream.next,struct bttv_buffer,vb.stream); + } else { + /* read() capture */ + if (NULL == fh->cap.read_buf) { + /* need to capture a new frame */ + if (locked_btres(fh->btv,RESOURCE_VIDEO_STREAM)) + return rc | POLLERR; + fh->cap.read_buf = videobuf_sg_alloc(fh->cap.msize); + if (NULL == fh->cap.read_buf) + return rc | POLLERR; + fh->cap.read_buf->memory = V4L2_MEMORY_USERPTR; + field = videobuf_next_field(&fh->cap); + if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,field)) { + kfree (fh->cap.read_buf); + fh->cap.read_buf = NULL; + return rc | POLLERR; + } + fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf); + fh->cap.read_off = 0; + } + buf = (struct bttv_buffer*)fh->cap.read_buf; + } + + poll_wait(file, &buf->vb.done, wait); + if (buf->vb.state == VIDEOBUF_DONE || + buf->vb.state == VIDEOBUF_ERROR) + rc = rc | POLLIN|POLLRDNORM; + return rc; +} + +static int bttv_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct bttv *btv = video_drvdata(file); + struct bttv_fh *fh; + enum v4l2_buf_type type = 0; + + dprintk("open dev=%s\n", video_device_node_name(vdev)); + + if (vdev->vfl_type == VFL_TYPE_GRABBER) { + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } else if (vdev->vfl_type == VFL_TYPE_VBI) { + type = V4L2_BUF_TYPE_VBI_CAPTURE; + } else { + WARN_ON(1); + return -ENODEV; + } + + dprintk("%d: open called (type=%s)\n", + btv->c.nr, v4l2_type_names[type]); + + /* allocate per filehandle data */ + fh = kmalloc(sizeof(*fh), GFP_KERNEL); + if (unlikely(!fh)) + return -ENOMEM; + btv->users++; + file->private_data = fh; + + *fh = btv->init; + v4l2_fh_init(&fh->fh, vdev); + + fh->type = type; + fh->ov.setup_ok = 0; + + videobuf_queue_sg_init(&fh->cap, &bttv_video_qops, + &btv->c.pci->dev, &btv->s_lock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct bttv_buffer), + fh, &btv->lock); + videobuf_queue_sg_init(&fh->vbi, &bttv_vbi_qops, + &btv->c.pci->dev, &btv->s_lock, + V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_FIELD_SEQ_TB, + sizeof(struct bttv_buffer), + fh, &btv->lock); + set_tvnorm(btv,btv->tvnorm); + set_input(btv, btv->input, btv->tvnorm); + audio_mute(btv, btv->mute); + + /* The V4L2 spec requires one global set of cropping parameters + which only change on request. These are stored in btv->crop[1]. + However for compatibility with V4L apps and cropping unaware + V4L2 apps we now reset the cropping parameters as seen through + this fh, which is to say VIDIOC_G_CROP and scaling limit checks + will use btv->crop[0], the default cropping parameters for the + current video standard, and VIDIOC_S_FMT will not implicitely + change the cropping parameters until VIDIOC_S_CROP has been + called. */ + fh->do_crop = !reset_crop; /* module parameter */ + + /* Likewise there should be one global set of VBI capture + parameters, but for compatibility with V4L apps and earlier + driver versions each fh has its own parameters. */ + bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm); + + bttv_field_count(btv); + v4l2_fh_add(&fh->fh); + return 0; +} + +static int bttv_release(struct file *file) +{ + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; + + /* turn off overlay */ + if (check_btres(fh, RESOURCE_OVERLAY)) + bttv_switch_overlay(btv,fh,NULL); + + /* stop video capture */ + if (check_btres(fh, RESOURCE_VIDEO_STREAM)) { + videobuf_streamoff(&fh->cap); + free_btres_lock(btv,fh,RESOURCE_VIDEO_STREAM); + } + if (fh->cap.read_buf) { + buffer_release(&fh->cap,fh->cap.read_buf); + kfree(fh->cap.read_buf); + } + if (check_btres(fh, RESOURCE_VIDEO_READ)) { + free_btres_lock(btv, fh, RESOURCE_VIDEO_READ); + } + + /* stop vbi capture */ + if (check_btres(fh, RESOURCE_VBI)) { + videobuf_stop(&fh->vbi); + free_btres_lock(btv,fh,RESOURCE_VBI); + } + + /* free stuff */ + + videobuf_mmap_free(&fh->cap); + videobuf_mmap_free(&fh->vbi); + file->private_data = NULL; + + btv->users--; + bttv_field_count(btv); + + if (!btv->users) + audio_mute(btv, btv->mute); + + v4l2_fh_del(&fh->fh); + v4l2_fh_exit(&fh->fh); + kfree(fh); + return 0; +} + +static int +bttv_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct bttv_fh *fh = file->private_data; + + dprintk("%d: mmap type=%s 0x%lx+%ld\n", + fh->btv->c.nr, v4l2_type_names[fh->type], + vma->vm_start, vma->vm_end - vma->vm_start); + return videobuf_mmap_mapper(bttv_queue(fh),vma); +} + +static const struct v4l2_file_operations bttv_fops = +{ + .owner = THIS_MODULE, + .open = bttv_open, + .release = bttv_release, + .unlocked_ioctl = video_ioctl2, + .read = bttv_read, + .mmap = bttv_mmap, + .poll = bttv_poll, +}; + +static const struct v4l2_ioctl_ops bttv_ioctl_ops = { + .vidioc_querycap = bttv_querycap, + .vidioc_enum_fmt_vid_cap = bttv_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = bttv_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = bttv_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = bttv_s_fmt_vid_cap, + .vidioc_enum_fmt_vid_overlay = bttv_enum_fmt_vid_overlay, + .vidioc_g_fmt_vid_overlay = bttv_g_fmt_vid_overlay, + .vidioc_try_fmt_vid_overlay = bttv_try_fmt_vid_overlay, + .vidioc_s_fmt_vid_overlay = bttv_s_fmt_vid_overlay, + .vidioc_g_fmt_vbi_cap = bttv_g_fmt_vbi_cap, + .vidioc_try_fmt_vbi_cap = bttv_try_fmt_vbi_cap, + .vidioc_s_fmt_vbi_cap = bttv_s_fmt_vbi_cap, + .vidioc_cropcap = bttv_cropcap, + .vidioc_reqbufs = bttv_reqbufs, + .vidioc_querybuf = bttv_querybuf, + .vidioc_qbuf = bttv_qbuf, + .vidioc_dqbuf = bttv_dqbuf, + .vidioc_s_std = bttv_s_std, + .vidioc_g_std = bttv_g_std, + .vidioc_enum_input = bttv_enum_input, + .vidioc_g_input = bttv_g_input, + .vidioc_s_input = bttv_s_input, + .vidioc_streamon = bttv_streamon, + .vidioc_streamoff = bttv_streamoff, + .vidioc_g_tuner = bttv_g_tuner, + .vidioc_s_tuner = bttv_s_tuner, + .vidioc_g_crop = bttv_g_crop, + .vidioc_s_crop = bttv_s_crop, + .vidioc_g_fbuf = bttv_g_fbuf, + .vidioc_s_fbuf = bttv_s_fbuf, + .vidioc_overlay = bttv_overlay, + .vidioc_g_parm = bttv_g_parm, + .vidioc_g_frequency = bttv_g_frequency, + .vidioc_s_frequency = bttv_s_frequency, + .vidioc_log_status = bttv_log_status, + .vidioc_querystd = bttv_querystd, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_g_chip_ident = bttv_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = bttv_g_register, + .vidioc_s_register = bttv_s_register, +#endif +}; + +static struct video_device bttv_video_template = { + .fops = &bttv_fops, + .ioctl_ops = &bttv_ioctl_ops, + .tvnorms = BTTV_NORMS, +}; + +/* ----------------------------------------------------------------------- */ +/* radio interface */ + +static int radio_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct bttv *btv = video_drvdata(file); + struct bttv_fh *fh; + + dprintk("open dev=%s\n", video_device_node_name(vdev)); + + dprintk("%d: open called (radio)\n", btv->c.nr); + + /* allocate per filehandle data */ + fh = kmalloc(sizeof(*fh), GFP_KERNEL); + if (unlikely(!fh)) + return -ENOMEM; + file->private_data = fh; + *fh = btv->init; + v4l2_fh_init(&fh->fh, vdev); + + btv->radio_user++; + audio_mute(btv, btv->mute); + + v4l2_fh_add(&fh->fh); + + return 0; +} + +static int radio_release(struct file *file) +{ + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; + struct saa6588_command cmd; + + file->private_data = NULL; + v4l2_fh_del(&fh->fh); + v4l2_fh_exit(&fh->fh); + kfree(fh); + + btv->radio_user--; + + bttv_call_all(btv, core, ioctl, SAA6588_CMD_CLOSE, &cmd); + + if (btv->radio_user == 0) + btv->has_radio_tuner = 0; + return 0; +} + +static int radio_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (0 != t->index) + return -EINVAL; + strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; + radio_enable(btv); + + bttv_call_all(btv, tuner, g_tuner, t); + + if (btv->audio_mode_gpio) + btv->audio_mode_gpio(btv, t, 0); + + return 0; +} + +static int radio_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (0 != t->index) + return -EINVAL; + + radio_enable(btv); + bttv_call_all(btv, tuner, s_tuner, t); + return 0; +} + +static ssize_t radio_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; + struct saa6588_command cmd; + cmd.block_count = count/3; + cmd.buffer = data; + cmd.instance = file; + cmd.result = -ENODEV; + radio_enable(btv); + + bttv_call_all(btv, core, ioctl, SAA6588_CMD_READ, &cmd); + + return cmd.result; +} + +static unsigned int radio_poll(struct file *file, poll_table *wait) +{ + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; + unsigned long req_events = poll_requested_events(wait); + struct saa6588_command cmd; + unsigned int res = 0; + + if (v4l2_event_pending(&fh->fh)) + res = POLLPRI; + else if (req_events & POLLPRI) + poll_wait(file, &fh->fh.wait, wait); + radio_enable(btv); + cmd.instance = file; + cmd.event_list = wait; + cmd.result = res; + bttv_call_all(btv, core, ioctl, SAA6588_CMD_POLL, &cmd); + + return cmd.result; +} + +static const struct v4l2_file_operations radio_fops = +{ + .owner = THIS_MODULE, + .open = radio_open, + .read = radio_read, + .release = radio_release, + .unlocked_ioctl = video_ioctl2, + .poll = radio_poll, +}; + +static const struct v4l2_ioctl_ops radio_ioctl_ops = { + .vidioc_querycap = bttv_querycap, + .vidioc_log_status = bttv_log_status, + .vidioc_g_tuner = radio_g_tuner, + .vidioc_s_tuner = radio_s_tuner, + .vidioc_g_frequency = bttv_g_frequency, + .vidioc_s_frequency = bttv_s_frequency, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static struct video_device radio_template = { + .fops = &radio_fops, + .ioctl_ops = &radio_ioctl_ops, +}; + +/* ----------------------------------------------------------------------- */ +/* some debug code */ + +static int bttv_risc_decode(u32 risc) +{ + static char *instr[16] = { + [ BT848_RISC_WRITE >> 28 ] = "write", + [ BT848_RISC_SKIP >> 28 ] = "skip", + [ BT848_RISC_WRITEC >> 28 ] = "writec", + [ BT848_RISC_JUMP >> 28 ] = "jump", + [ BT848_RISC_SYNC >> 28 ] = "sync", + [ BT848_RISC_WRITE123 >> 28 ] = "write123", + [ BT848_RISC_SKIP123 >> 28 ] = "skip123", + [ BT848_RISC_WRITE1S23 >> 28 ] = "write1s23", + }; + static int incr[16] = { + [ BT848_RISC_WRITE >> 28 ] = 2, + [ BT848_RISC_JUMP >> 28 ] = 2, + [ BT848_RISC_SYNC >> 28 ] = 2, + [ BT848_RISC_WRITE123 >> 28 ] = 5, + [ BT848_RISC_SKIP123 >> 28 ] = 2, + [ BT848_RISC_WRITE1S23 >> 28 ] = 3, + }; + static char *bits[] = { + "be0", "be1", "be2", "be3/resync", + "set0", "set1", "set2", "set3", + "clr0", "clr1", "clr2", "clr3", + "irq", "res", "eol", "sol", + }; + int i; + + pr_cont("0x%08x [ %s", risc, + instr[risc >> 28] ? instr[risc >> 28] : "INVALID"); + for (i = ARRAY_SIZE(bits)-1; i >= 0; i--) + if (risc & (1 << (i + 12))) + pr_cont(" %s", bits[i]); + pr_cont(" count=%d ]\n", risc & 0xfff); + return incr[risc >> 28] ? incr[risc >> 28] : 1; +} + +static void bttv_risc_disasm(struct bttv *btv, + struct btcx_riscmem *risc) +{ + unsigned int i,j,n; + + pr_info("%s: risc disasm: %p [dma=0x%08lx]\n", + btv->c.v4l2_dev.name, risc->cpu, (unsigned long)risc->dma); + for (i = 0; i < (risc->size >> 2); i += n) { + pr_info("%s: 0x%lx: ", + btv->c.v4l2_dev.name, + (unsigned long)(risc->dma + (i<<2))); + n = bttv_risc_decode(le32_to_cpu(risc->cpu[i])); + for (j = 1; j < n; j++) + pr_info("%s: 0x%lx: 0x%08x [ arg #%d ]\n", + btv->c.v4l2_dev.name, + (unsigned long)(risc->dma + ((i+j)<<2)), + risc->cpu[i+j], j); + if (0 == risc->cpu[i]) + break; + } +} + +static void bttv_print_riscaddr(struct bttv *btv) +{ + pr_info(" main: %08llx\n", (unsigned long long)btv->main.dma); + pr_info(" vbi : o=%08llx e=%08llx\n", + btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0, + btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0); + pr_info(" cap : o=%08llx e=%08llx\n", + btv->curr.top + ? (unsigned long long)btv->curr.top->top.dma : 0, + btv->curr.bottom + ? (unsigned long long)btv->curr.bottom->bottom.dma : 0); + pr_info(" scr : o=%08llx e=%08llx\n", + btv->screen ? (unsigned long long)btv->screen->top.dma : 0, + btv->screen ? (unsigned long long)btv->screen->bottom.dma : 0); + bttv_risc_disasm(btv, &btv->main); +} + +/* ----------------------------------------------------------------------- */ +/* irq handler */ + +static char *irq_name[] = { + "FMTCHG", // format change detected (525 vs. 625) + "VSYNC", // vertical sync (new field) + "HSYNC", // horizontal sync + "OFLOW", // chroma/luma AGC overflow + "HLOCK", // horizontal lock changed + "VPRES", // video presence changed + "6", "7", + "I2CDONE", // hw irc operation finished + "GPINT", // gpio port triggered irq + "10", + "RISCI", // risc instruction triggered irq + "FBUS", // pixel data fifo dropped data (high pci bus latencies) + "FTRGT", // pixel data fifo overrun + "FDSR", // fifo data stream resyncronisation + "PPERR", // parity error (data transfer) + "RIPERR", // parity error (read risc instructions) + "PABORT", // pci abort + "OCERR", // risc instruction error + "SCERR", // syncronisation error +}; + +static void bttv_print_irqbits(u32 print, u32 mark) +{ + unsigned int i; + + pr_cont("bits:"); + for (i = 0; i < ARRAY_SIZE(irq_name); i++) { + if (print & (1 << i)) + pr_cont(" %s", irq_name[i]); + if (mark & (1 << i)) + pr_cont("*"); + } +} + +static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc) +{ + pr_warn("%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n", + btv->c.nr, + (unsigned long)btv->main.dma, + (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_VBI+1]), + (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_FIELD+1]), + (unsigned long)rc); + + if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) { + pr_notice("%d: Oh, there (temporarily?) is no input signal. " + "Ok, then this is harmless, don't worry ;)\n", + btv->c.nr); + return; + } + pr_notice("%d: Uhm. Looks like we have unusual high IRQ latencies\n", + btv->c.nr); + pr_notice("%d: Lets try to catch the culpit red-handed ...\n", + btv->c.nr); + dump_stack(); +} + +static int +bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set) +{ + struct bttv_buffer *item; + + memset(set,0,sizeof(*set)); + + /* capture request ? */ + if (!list_empty(&btv->capture)) { + set->frame_irq = 1; + item = list_entry(btv->capture.next, struct bttv_buffer, vb.queue); + if (V4L2_FIELD_HAS_TOP(item->vb.field)) + set->top = item; + if (V4L2_FIELD_HAS_BOTTOM(item->vb.field)) + set->bottom = item; + + /* capture request for other field ? */ + if (!V4L2_FIELD_HAS_BOTH(item->vb.field) && + (item->vb.queue.next != &btv->capture)) { + item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue); + /* Mike Isely - Only check + * and set up the bottom field in the logic + * below. Don't ever do the top field. This + * of course means that if we set up the + * bottom field in the above code that we'll + * actually skip a field. But that's OK. + * Having processed only a single buffer this + * time, then the next time around the first + * available buffer should be for a top field. + * That will then cause us here to set up a + * top then a bottom field in the normal way. + * The alternative to this understanding is + * that we set up the second available buffer + * as a top field, but that's out of order + * since this driver always processes the top + * field first - the effect will be the two + * buffers being returned in the wrong order, + * with the second buffer also being delayed + * by one field time (owing to the fifo nature + * of videobuf). Worse still, we'll be stuck + * doing fields out of order now every time + * until something else causes a field to be + * dropped. By effectively forcing a field to + * drop this way then we always get back into + * sync within a single frame time. (Out of + * order fields can screw up deinterlacing + * algorithms.) */ + if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) { + if (NULL == set->bottom && + V4L2_FIELD_BOTTOM == item->vb.field) { + set->bottom = item; + } + if (NULL != set->top && NULL != set->bottom) + set->top_irq = 2; + } + } + } + + /* screen overlay ? */ + if (NULL != btv->screen) { + if (V4L2_FIELD_HAS_BOTH(btv->screen->vb.field)) { + if (NULL == set->top && NULL == set->bottom) { + set->top = btv->screen; + set->bottom = btv->screen; + } + } else { + if (V4L2_FIELD_TOP == btv->screen->vb.field && + NULL == set->top) { + set->top = btv->screen; + } + if (V4L2_FIELD_BOTTOM == btv->screen->vb.field && + NULL == set->bottom) { + set->bottom = btv->screen; + } + } + } + + dprintk("%d: next set: top=%p bottom=%p [screen=%p,irq=%d,%d]\n", + btv->c.nr, set->top, set->bottom, + btv->screen, set->frame_irq, set->top_irq); + return 0; +} + +static void +bttv_irq_wakeup_video(struct bttv *btv, struct bttv_buffer_set *wakeup, + struct bttv_buffer_set *curr, unsigned int state) +{ + struct timeval ts; + + v4l2_get_timestamp(&ts); + + if (wakeup->top == wakeup->bottom) { + if (NULL != wakeup->top && curr->top != wakeup->top) { + if (irq_debug > 1) + pr_debug("%d: wakeup: both=%p\n", + btv->c.nr, wakeup->top); + wakeup->top->vb.ts = ts; + wakeup->top->vb.field_count = btv->field_count; + wakeup->top->vb.state = state; + wake_up(&wakeup->top->vb.done); + } + } else { + if (NULL != wakeup->top && curr->top != wakeup->top) { + if (irq_debug > 1) + pr_debug("%d: wakeup: top=%p\n", + btv->c.nr, wakeup->top); + wakeup->top->vb.ts = ts; + wakeup->top->vb.field_count = btv->field_count; + wakeup->top->vb.state = state; + wake_up(&wakeup->top->vb.done); + } + if (NULL != wakeup->bottom && curr->bottom != wakeup->bottom) { + if (irq_debug > 1) + pr_debug("%d: wakeup: bottom=%p\n", + btv->c.nr, wakeup->bottom); + wakeup->bottom->vb.ts = ts; + wakeup->bottom->vb.field_count = btv->field_count; + wakeup->bottom->vb.state = state; + wake_up(&wakeup->bottom->vb.done); + } + } +} + +static void +bttv_irq_wakeup_vbi(struct bttv *btv, struct bttv_buffer *wakeup, + unsigned int state) +{ + struct timeval ts; + + if (NULL == wakeup) + return; + + v4l2_get_timestamp(&ts); + wakeup->vb.ts = ts; + wakeup->vb.field_count = btv->field_count; + wakeup->vb.state = state; + wake_up(&wakeup->vb.done); +} + +static void bttv_irq_timeout(unsigned long data) +{ + struct bttv *btv = (struct bttv *)data; + struct bttv_buffer_set old,new; + struct bttv_buffer *ovbi; + struct bttv_buffer *item; + unsigned long flags; + + if (bttv_verbose) { + pr_info("%d: timeout: drop=%d irq=%d/%d, risc=%08x, ", + btv->c.nr, btv->framedrop, btv->irq_me, btv->irq_total, + btread(BT848_RISC_COUNT)); + bttv_print_irqbits(btread(BT848_INT_STAT),0); + pr_cont("\n"); + } + + spin_lock_irqsave(&btv->s_lock,flags); + + /* deactivate stuff */ + memset(&new,0,sizeof(new)); + old = btv->curr; + ovbi = btv->cvbi; + btv->curr = new; + btv->cvbi = NULL; + btv->loop_irq = 0; + bttv_buffer_activate_video(btv, &new); + bttv_buffer_activate_vbi(btv, NULL); + bttv_set_dma(btv, 0); + + /* wake up */ + bttv_irq_wakeup_video(btv, &old, &new, VIDEOBUF_ERROR); + bttv_irq_wakeup_vbi(btv, ovbi, VIDEOBUF_ERROR); + + /* cancel all outstanding capture / vbi requests */ + while (!list_empty(&btv->capture)) { + item = list_entry(btv->capture.next, struct bttv_buffer, vb.queue); + list_del(&item->vb.queue); + item->vb.state = VIDEOBUF_ERROR; + wake_up(&item->vb.done); + } + while (!list_empty(&btv->vcapture)) { + item = list_entry(btv->vcapture.next, struct bttv_buffer, vb.queue); + list_del(&item->vb.queue); + item->vb.state = VIDEOBUF_ERROR; + wake_up(&item->vb.done); + } + + btv->errors++; + spin_unlock_irqrestore(&btv->s_lock,flags); +} + +static void +bttv_irq_wakeup_top(struct bttv *btv) +{ + struct bttv_buffer *wakeup = btv->curr.top; + + if (NULL == wakeup) + return; + + spin_lock(&btv->s_lock); + btv->curr.top_irq = 0; + btv->curr.top = NULL; + bttv_risc_hook(btv, RISC_SLOT_O_FIELD, NULL, 0); + + v4l2_get_timestamp(&wakeup->vb.ts); + wakeup->vb.field_count = btv->field_count; + wakeup->vb.state = VIDEOBUF_DONE; + wake_up(&wakeup->vb.done); + spin_unlock(&btv->s_lock); +} + +static inline int is_active(struct btcx_riscmem *risc, u32 rc) +{ + if (rc < risc->dma) + return 0; + if (rc > risc->dma + risc->size) + return 0; + return 1; +} + +static void +bttv_irq_switch_video(struct bttv *btv) +{ + struct bttv_buffer_set new; + struct bttv_buffer_set old; + dma_addr_t rc; + + spin_lock(&btv->s_lock); + + /* new buffer set */ + bttv_irq_next_video(btv, &new); + rc = btread(BT848_RISC_COUNT); + if ((btv->curr.top && is_active(&btv->curr.top->top, rc)) || + (btv->curr.bottom && is_active(&btv->curr.bottom->bottom, rc))) { + btv->framedrop++; + if (debug_latency) + bttv_irq_debug_low_latency(btv, rc); + spin_unlock(&btv->s_lock); + return; + } + + /* switch over */ + old = btv->curr; + btv->curr = new; + btv->loop_irq &= ~1; + bttv_buffer_activate_video(btv, &new); + bttv_set_dma(btv, 0); + + /* switch input */ + if (UNSET != btv->new_input) { + video_mux(btv,btv->new_input); + btv->new_input = UNSET; + } + + /* wake up finished buffers */ + bttv_irq_wakeup_video(btv, &old, &new, VIDEOBUF_DONE); + spin_unlock(&btv->s_lock); +} + +static void +bttv_irq_switch_vbi(struct bttv *btv) +{ + struct bttv_buffer *new = NULL; + struct bttv_buffer *old; + u32 rc; + + spin_lock(&btv->s_lock); + + if (!list_empty(&btv->vcapture)) + new = list_entry(btv->vcapture.next, struct bttv_buffer, vb.queue); + old = btv->cvbi; + + rc = btread(BT848_RISC_COUNT); + if (NULL != old && (is_active(&old->top, rc) || + is_active(&old->bottom, rc))) { + btv->framedrop++; + if (debug_latency) + bttv_irq_debug_low_latency(btv, rc); + spin_unlock(&btv->s_lock); + return; + } + + /* switch */ + btv->cvbi = new; + btv->loop_irq &= ~4; + bttv_buffer_activate_vbi(btv, new); + bttv_set_dma(btv, 0); + + bttv_irq_wakeup_vbi(btv, old, VIDEOBUF_DONE); + spin_unlock(&btv->s_lock); +} + +static irqreturn_t bttv_irq(int irq, void *dev_id) +{ + u32 stat,astat; + u32 dstat; + int count; + struct bttv *btv; + int handled = 0; + + btv=(struct bttv *)dev_id; + + count=0; + while (1) { + /* get/clear interrupt status bits */ + stat=btread(BT848_INT_STAT); + astat=stat&btread(BT848_INT_MASK); + if (!astat) + break; + handled = 1; + btwrite(stat,BT848_INT_STAT); + + /* get device status bits */ + dstat=btread(BT848_DSTATUS); + + if (irq_debug) { + pr_debug("%d: irq loop=%d fc=%d riscs=%x, riscc=%08x, ", + btv->c.nr, count, btv->field_count, + stat>>28, btread(BT848_RISC_COUNT)); + bttv_print_irqbits(stat,astat); + if (stat & BT848_INT_HLOCK) + pr_cont(" HLOC => %s", + dstat & BT848_DSTATUS_HLOC + ? "yes" : "no"); + if (stat & BT848_INT_VPRES) + pr_cont(" PRES => %s", + dstat & BT848_DSTATUS_PRES + ? "yes" : "no"); + if (stat & BT848_INT_FMTCHG) + pr_cont(" NUML => %s", + dstat & BT848_DSTATUS_NUML + ? "625" : "525"); + pr_cont("\n"); + } + + if (astat&BT848_INT_VSYNC) + btv->field_count++; + + if ((astat & BT848_INT_GPINT) && btv->remote) { + bttv_input_irq(btv); + } + + if (astat & BT848_INT_I2CDONE) { + btv->i2c_done = stat; + wake_up(&btv->i2c_queue); + } + + if ((astat & BT848_INT_RISCI) && (stat & (4<<28))) + bttv_irq_switch_vbi(btv); + + if ((astat & BT848_INT_RISCI) && (stat & (2<<28))) + bttv_irq_wakeup_top(btv); + + if ((astat & BT848_INT_RISCI) && (stat & (1<<28))) + bttv_irq_switch_video(btv); + + if ((astat & BT848_INT_HLOCK) && btv->opt_automute) + /* trigger automute */ + audio_mux_gpio(btv, btv->audio_input, btv->mute); + + if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) { + pr_info("%d: %s%s @ %08x,", + btv->c.nr, + (astat & BT848_INT_SCERR) ? "SCERR" : "", + (astat & BT848_INT_OCERR) ? "OCERR" : "", + btread(BT848_RISC_COUNT)); + bttv_print_irqbits(stat,astat); + pr_cont("\n"); + if (bttv_debug) + bttv_print_riscaddr(btv); + } + if (fdsr && astat & BT848_INT_FDSR) { + pr_info("%d: FDSR @ %08x\n", + btv->c.nr, btread(BT848_RISC_COUNT)); + if (bttv_debug) + bttv_print_riscaddr(btv); + } + + count++; + if (count > 4) { + + if (count > 8 || !(astat & BT848_INT_GPINT)) { + btwrite(0, BT848_INT_MASK); + + pr_err("%d: IRQ lockup, cleared int mask [", + btv->c.nr); + } else { + pr_err("%d: IRQ lockup, clearing GPINT from int mask [", + btv->c.nr); + + btwrite(btread(BT848_INT_MASK) & (-1 ^ BT848_INT_GPINT), + BT848_INT_MASK); + }; + + bttv_print_irqbits(stat,astat); + + pr_cont("]\n"); + } + } + btv->irq_total++; + if (handled) + btv->irq_me++; + return IRQ_RETVAL(handled); +} + + +/* ----------------------------------------------------------------------- */ +/* initialization */ + +static struct video_device *vdev_init(struct bttv *btv, + const struct video_device *template, + const char *type_name) +{ + struct video_device *vfd; + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + vfd->v4l2_dev = &btv->c.v4l2_dev; + vfd->release = video_device_release; + vfd->debug = bttv_debug; + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + video_set_drvdata(vfd, btv); + snprintf(vfd->name, sizeof(vfd->name), "BT%d%s %s (%s)", + btv->id, (btv->id==848 && btv->revision==0x12) ? "A" : "", + type_name, bttv_tvcards[btv->c.type].name); + if (btv->tuner_type == TUNER_ABSENT) { + v4l2_disable_ioctl(vfd, VIDIOC_G_FREQUENCY); + v4l2_disable_ioctl(vfd, VIDIOC_S_FREQUENCY); + v4l2_disable_ioctl(vfd, VIDIOC_G_TUNER); + v4l2_disable_ioctl(vfd, VIDIOC_S_TUNER); + } + return vfd; +} + +static void bttv_unregister_video(struct bttv *btv) +{ + if (btv->video_dev) { + if (video_is_registered(btv->video_dev)) + video_unregister_device(btv->video_dev); + else + video_device_release(btv->video_dev); + btv->video_dev = NULL; + } + if (btv->vbi_dev) { + if (video_is_registered(btv->vbi_dev)) + video_unregister_device(btv->vbi_dev); + else + video_device_release(btv->vbi_dev); + btv->vbi_dev = NULL; + } + if (btv->radio_dev) { + if (video_is_registered(btv->radio_dev)) + video_unregister_device(btv->radio_dev); + else + video_device_release(btv->radio_dev); + btv->radio_dev = NULL; + } +} + +/* register video4linux devices */ +static int bttv_register_video(struct bttv *btv) +{ + if (no_overlay > 0) + pr_notice("Overlay support disabled\n"); + + /* video */ + btv->video_dev = vdev_init(btv, &bttv_video_template, "video"); + + if (NULL == btv->video_dev) + goto err; + if (video_register_device(btv->video_dev, VFL_TYPE_GRABBER, + video_nr[btv->c.nr]) < 0) + goto err; + pr_info("%d: registered device %s\n", + btv->c.nr, video_device_node_name(btv->video_dev)); + if (device_create_file(&btv->video_dev->dev, + &dev_attr_card)<0) { + pr_err("%d: device_create_file 'card' failed\n", btv->c.nr); + goto err; + } + + /* vbi */ + btv->vbi_dev = vdev_init(btv, &bttv_video_template, "vbi"); + + if (NULL == btv->vbi_dev) + goto err; + if (video_register_device(btv->vbi_dev, VFL_TYPE_VBI, + vbi_nr[btv->c.nr]) < 0) + goto err; + pr_info("%d: registered device %s\n", + btv->c.nr, video_device_node_name(btv->vbi_dev)); + + if (!btv->has_radio) + return 0; + /* radio */ + btv->radio_dev = vdev_init(btv, &radio_template, "radio"); + if (NULL == btv->radio_dev) + goto err; + btv->radio_dev->ctrl_handler = &btv->radio_ctrl_handler; + if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO, + radio_nr[btv->c.nr]) < 0) + goto err; + pr_info("%d: registered device %s\n", + btv->c.nr, video_device_node_name(btv->radio_dev)); + + /* all done */ + return 0; + + err: + bttv_unregister_video(btv); + return -1; +} + + +/* on OpenFirmware machines (PowerMac at least), PCI memory cycle */ +/* response on cards with no firmware is not enabled by OF */ +static void pci_set_command(struct pci_dev *dev) +{ +#if defined(__powerpc__) + unsigned int cmd; + + pci_read_config_dword(dev, PCI_COMMAND, &cmd); + cmd = (cmd | PCI_COMMAND_MEMORY ); + pci_write_config_dword(dev, PCI_COMMAND, cmd); +#endif +} + +static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) +{ + struct v4l2_frequency init_freq = { + .tuner = 0, + .type = V4L2_TUNER_ANALOG_TV, + .frequency = 980, + }; + int result; + unsigned char lat; + struct bttv *btv; + struct v4l2_ctrl_handler *hdl; + + if (bttv_num == BTTV_MAX) + return -ENOMEM; + pr_info("Bt8xx card found (%d)\n", bttv_num); + bttvs[bttv_num] = btv = kzalloc(sizeof(*btv), GFP_KERNEL); + if (btv == NULL) { + pr_err("out of memory\n"); + return -ENOMEM; + } + btv->c.nr = bttv_num; + snprintf(btv->c.v4l2_dev.name, sizeof(btv->c.v4l2_dev.name), + "bttv%d", btv->c.nr); + + /* initialize structs / fill in defaults */ + mutex_init(&btv->lock); + spin_lock_init(&btv->s_lock); + spin_lock_init(&btv->gpio_lock); + init_waitqueue_head(&btv->i2c_queue); + INIT_LIST_HEAD(&btv->c.subs); + INIT_LIST_HEAD(&btv->capture); + INIT_LIST_HEAD(&btv->vcapture); + + init_timer(&btv->timeout); + btv->timeout.function = bttv_irq_timeout; + btv->timeout.data = (unsigned long)btv; + + btv->i2c_rc = -1; + btv->tuner_type = UNSET; + btv->new_input = UNSET; + btv->has_radio=radio[btv->c.nr]; + + /* pci stuff (init, get irq/mmio, ... */ + btv->c.pci = dev; + btv->id = dev->device; + if (pci_enable_device(dev)) { + pr_warn("%d: Can't enable device\n", btv->c.nr); + return -EIO; + } + if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) { + pr_warn("%d: No suitable DMA available\n", btv->c.nr); + return -EIO; + } + if (!request_mem_region(pci_resource_start(dev,0), + pci_resource_len(dev,0), + btv->c.v4l2_dev.name)) { + pr_warn("%d: can't request iomem (0x%llx)\n", + btv->c.nr, + (unsigned long long)pci_resource_start(dev, 0)); + return -EBUSY; + } + pci_set_master(dev); + pci_set_command(dev); + + result = v4l2_device_register(&dev->dev, &btv->c.v4l2_dev); + if (result < 0) { + pr_warn("%d: v4l2_device_register() failed\n", btv->c.nr); + goto fail0; + } + hdl = &btv->ctrl_handler; + v4l2_ctrl_handler_init(hdl, 20); + btv->c.v4l2_dev.ctrl_handler = hdl; + v4l2_ctrl_handler_init(&btv->radio_ctrl_handler, 6); + + btv->revision = dev->revision; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + pr_info("%d: Bt%d (rev %d) at %s, irq: %d, latency: %d, mmio: 0x%llx\n", + bttv_num, btv->id, btv->revision, pci_name(dev), + btv->c.pci->irq, lat, + (unsigned long long)pci_resource_start(dev, 0)); + schedule(); + + btv->bt848_mmio = ioremap(pci_resource_start(dev, 0), 0x1000); + if (NULL == btv->bt848_mmio) { + pr_err("%d: ioremap() failed\n", btv->c.nr); + result = -EIO; + goto fail1; + } + + /* identify card */ + bttv_idcard(btv); + + /* disable irqs, register irq handler */ + btwrite(0, BT848_INT_MASK); + result = request_irq(btv->c.pci->irq, bttv_irq, + IRQF_SHARED | IRQF_DISABLED, btv->c.v4l2_dev.name, (void *)btv); + if (result < 0) { + pr_err("%d: can't get IRQ %d\n", + bttv_num, btv->c.pci->irq); + goto fail1; + } + + if (0 != bttv_handle_chipset(btv)) { + result = -EIO; + goto fail2; + } + + /* init options from insmod args */ + btv->opt_combfilter = combfilter; + bttv_ctrl_combfilter.def = combfilter; + bttv_ctrl_lumafilter.def = lumafilter; + btv->opt_automute = automute; + bttv_ctrl_automute.def = automute; + bttv_ctrl_agc_crush.def = agc_crush; + btv->opt_vcr_hack = vcr_hack; + bttv_ctrl_vcr_hack.def = vcr_hack; + bttv_ctrl_whitecrush_upper.def = whitecrush_upper; + bttv_ctrl_whitecrush_lower.def = whitecrush_lower; + btv->opt_uv_ratio = uv_ratio; + bttv_ctrl_uv_ratio.def = uv_ratio; + bttv_ctrl_full_luma.def = full_luma_range; + bttv_ctrl_coring.def = coring; + + /* fill struct bttv with some useful defaults */ + btv->init.btv = btv; + btv->init.ov.w.width = 320; + btv->init.ov.w.height = 240; + btv->init.fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); + btv->init.width = 320; + btv->init.height = 240; + btv->init.ov.w.width = 320; + btv->init.ov.w.height = 240; + btv->init.ov.field = V4L2_FIELD_INTERLACED; + btv->input = 0; + + v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 0xff00, 0x100, 32768); + v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xff80, 0x80, 0x6c00); + v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xff80, 0x80, 32768); + v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, + V4L2_CID_COLOR_KILLER, 0, 1, 1, 0); + v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, + V4L2_CID_HUE, 0, 0xff00, 0x100, 32768); + v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, + V4L2_CID_CHROMA_AGC, 0, 1, 1, !!chroma_agc); + v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + if (btv->volume_gpio) + v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 0xff00, 0x100, 0xff00); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_combfilter, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_automute, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_lumafilter, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_agc_crush, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_vcr_hack, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_whitecrush_lower, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_whitecrush_upper, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_uv_ratio, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_full_luma, NULL); + v4l2_ctrl_new_custom(hdl, &bttv_ctrl_coring, NULL); + + /* initialize hardware */ + if (bttv_gpio) + bttv_gpio_tracking(btv,"pre-init"); + + bttv_risc_init_main(btv); + init_bt848(btv); + + /* gpio */ + btwrite(0x00, BT848_GPIO_REG_INP); + btwrite(0x00, BT848_GPIO_OUT_EN); + if (bttv_verbose) + bttv_gpio_tracking(btv,"init"); + + /* needs to be done before i2c is registered */ + bttv_init_card1(btv); + + /* register i2c + gpio */ + init_bttv_i2c(btv); + + /* some card-specific stuff (needs working i2c) */ + bttv_init_card2(btv); + bttv_init_tuner(btv); + if (btv->tuner_type != TUNER_ABSENT) { + bttv_set_frequency(btv, &init_freq); + btv->radio_freq = 90500 * 16; /* 90.5Mhz default */ + } + btv->std = V4L2_STD_PAL; + init_irqreg(btv); + if (!bttv_tvcards[btv->c.type].no_video) + v4l2_ctrl_handler_setup(hdl); + if (hdl->error) { + result = hdl->error; + goto fail2; + } + /* mute device */ + audio_mute(btv, 1); + + /* register video4linux + input */ + if (!bttv_tvcards[btv->c.type].no_video) { + v4l2_ctrl_add_handler(&btv->radio_ctrl_handler, hdl, + v4l2_ctrl_radio_filter); + if (btv->radio_ctrl_handler.error) { + result = btv->radio_ctrl_handler.error; + goto fail2; + } + set_input(btv, 0, btv->tvnorm); + bttv_crop_reset(&btv->crop[0], btv->tvnorm); + btv->crop[1] = btv->crop[0]; /* current = default */ + disclaim_vbi_lines(btv); + disclaim_video_lines(btv); + bttv_register_video(btv); + } + + /* add subdevices and autoload dvb-bt8xx if needed */ + if (bttv_tvcards[btv->c.type].has_dvb) { + bttv_sub_add_device(&btv->c, "dvb"); + request_modules(btv); + } + + if (!disable_ir) { + init_bttv_i2c_ir(btv); + bttv_input_init(btv); + } + + /* everything is fine */ + bttv_num++; + return 0; + +fail2: + free_irq(btv->c.pci->irq,btv); + +fail1: + v4l2_ctrl_handler_free(&btv->ctrl_handler); + v4l2_ctrl_handler_free(&btv->radio_ctrl_handler); + v4l2_device_unregister(&btv->c.v4l2_dev); + +fail0: + if (btv->bt848_mmio) + iounmap(btv->bt848_mmio); + release_mem_region(pci_resource_start(btv->c.pci,0), + pci_resource_len(btv->c.pci,0)); + return result; +} + +static void bttv_remove(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct bttv *btv = to_bttv(v4l2_dev); + + if (bttv_verbose) + pr_info("%d: unloading\n", btv->c.nr); + + if (bttv_tvcards[btv->c.type].has_dvb) + flush_request_modules(btv); + + /* shutdown everything (DMA+IRQs) */ + btand(~15, BT848_GPIO_DMA_CTL); + btwrite(0, BT848_INT_MASK); + btwrite(~0x0, BT848_INT_STAT); + btwrite(0x0, BT848_GPIO_OUT_EN); + if (bttv_gpio) + bttv_gpio_tracking(btv,"cleanup"); + + /* tell gpio modules we are leaving ... */ + btv->shutdown=1; + bttv_input_fini(btv); + bttv_sub_del_devices(&btv->c); + + /* unregister i2c_bus + input */ + fini_bttv_i2c(btv); + + /* unregister video4linux */ + bttv_unregister_video(btv); + + /* free allocated memory */ + v4l2_ctrl_handler_free(&btv->ctrl_handler); + v4l2_ctrl_handler_free(&btv->radio_ctrl_handler); + btcx_riscmem_free(btv->c.pci,&btv->main); + + /* free resources */ + free_irq(btv->c.pci->irq,btv); + iounmap(btv->bt848_mmio); + release_mem_region(pci_resource_start(btv->c.pci,0), + pci_resource_len(btv->c.pci,0)); + + v4l2_device_unregister(&btv->c.v4l2_dev); + bttvs[btv->c.nr] = NULL; + kfree(btv); + + return; +} + +#ifdef CONFIG_PM +static int bttv_suspend(struct pci_dev *pci_dev, pm_message_t state) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct bttv *btv = to_bttv(v4l2_dev); + struct bttv_buffer_set idle; + unsigned long flags; + + dprintk("%d: suspend %d\n", btv->c.nr, state.event); + + /* stop dma + irqs */ + spin_lock_irqsave(&btv->s_lock,flags); + memset(&idle, 0, sizeof(idle)); + btv->state.video = btv->curr; + btv->state.vbi = btv->cvbi; + btv->state.loop_irq = btv->loop_irq; + btv->curr = idle; + btv->loop_irq = 0; + bttv_buffer_activate_video(btv, &idle); + bttv_buffer_activate_vbi(btv, NULL); + bttv_set_dma(btv, 0); + btwrite(0, BT848_INT_MASK); + spin_unlock_irqrestore(&btv->s_lock,flags); + + /* save bt878 state */ + btv->state.gpio_enable = btread(BT848_GPIO_OUT_EN); + btv->state.gpio_data = gpio_read(); + + /* save pci state */ + pci_save_state(pci_dev); + if (0 != pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state))) { + pci_disable_device(pci_dev); + btv->state.disabled = 1; + } + return 0; +} + +static int bttv_resume(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct bttv *btv = to_bttv(v4l2_dev); + unsigned long flags; + int err; + + dprintk("%d: resume\n", btv->c.nr); + + /* restore pci state */ + if (btv->state.disabled) { + err=pci_enable_device(pci_dev); + if (err) { + pr_warn("%d: Can't enable device\n", btv->c.nr); + return err; + } + btv->state.disabled = 0; + } + err=pci_set_power_state(pci_dev, PCI_D0); + if (err) { + pci_disable_device(pci_dev); + pr_warn("%d: Can't enable device\n", btv->c.nr); + btv->state.disabled = 1; + return err; + } + + pci_restore_state(pci_dev); + + /* restore bt878 state */ + bttv_reinit_bt848(btv); + gpio_inout(0xffffff, btv->state.gpio_enable); + gpio_write(btv->state.gpio_data); + + /* restart dma */ + spin_lock_irqsave(&btv->s_lock,flags); + btv->curr = btv->state.video; + btv->cvbi = btv->state.vbi; + btv->loop_irq = btv->state.loop_irq; + bttv_buffer_activate_video(btv, &btv->curr); + bttv_buffer_activate_vbi(btv, btv->cvbi); + bttv_set_dma(btv, 0); + spin_unlock_irqrestore(&btv->s_lock,flags); + return 0; +} +#endif + +static struct pci_device_id bttv_pci_tbl[] = { + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT848), 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT849), 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT878), 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT879), 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_FUSION879), 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, bttv_pci_tbl); + +static struct pci_driver bttv_pci_driver = { + .name = "bttv", + .id_table = bttv_pci_tbl, + .probe = bttv_probe, + .remove = bttv_remove, +#ifdef CONFIG_PM + .suspend = bttv_suspend, + .resume = bttv_resume, +#endif +}; + +static int __init bttv_init_module(void) +{ + int ret; + + bttv_num = 0; + + pr_info("driver version %s loaded\n", BTTV_VERSION); + if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME) + gbuffers = 2; + if (gbufsize > BTTV_MAX_FBUF) + gbufsize = BTTV_MAX_FBUF; + gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK; + if (bttv_verbose) + pr_info("using %d buffers with %dk (%d pages) each for capture\n", + gbuffers, gbufsize >> 10, gbufsize >> PAGE_SHIFT); + + bttv_check_chipset(); + + ret = bus_register(&bttv_sub_bus_type); + if (ret < 0) { + pr_warn("bus_register error: %d\n", ret); + return ret; + } + ret = pci_register_driver(&bttv_pci_driver); + if (ret < 0) + bus_unregister(&bttv_sub_bus_type); + + return ret; +} + +static void __exit bttv_cleanup_module(void) +{ + pci_unregister_driver(&bttv_pci_driver); + bus_unregister(&bttv_sub_bus_type); +} + +module_init(bttv_init_module); +module_exit(bttv_cleanup_module); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/bttv-gpio.c b/drivers/media/pci/bt8xx/bttv-gpio.c new file mode 100644 index 00000000..922e8233 --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-gpio.c @@ -0,0 +1,189 @@ +/* + + bttv-gpio.c -- gpio sub drivers + + sysfs-based sub driver interface for bttv + mainly intended for gpio access + + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) + (c) 1999-2003 Gerd Knorr + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +#include "bttvp.h" + +/* ----------------------------------------------------------------------- */ +/* internal: the bttv "bus" */ + +static int bttv_sub_bus_match(struct device *dev, struct device_driver *drv) +{ + struct bttv_sub_driver *sub = to_bttv_sub_drv(drv); + int len = strlen(sub->wanted); + + if (0 == strncmp(dev_name(dev), sub->wanted, len)) + return 1; + return 0; +} + +static int bttv_sub_probe(struct device *dev) +{ + struct bttv_sub_device *sdev = to_bttv_sub_dev(dev); + struct bttv_sub_driver *sub = to_bttv_sub_drv(dev->driver); + + return sub->probe ? sub->probe(sdev) : -ENODEV; +} + +static int bttv_sub_remove(struct device *dev) +{ + struct bttv_sub_device *sdev = to_bttv_sub_dev(dev); + struct bttv_sub_driver *sub = to_bttv_sub_drv(dev->driver); + + if (sub->remove) + sub->remove(sdev); + return 0; +} + +struct bus_type bttv_sub_bus_type = { + .name = "bttv-sub", + .match = &bttv_sub_bus_match, + .probe = bttv_sub_probe, + .remove = bttv_sub_remove, +}; + +static void release_sub_device(struct device *dev) +{ + struct bttv_sub_device *sub = to_bttv_sub_dev(dev); + kfree(sub); +} + +int bttv_sub_add_device(struct bttv_core *core, char *name) +{ + struct bttv_sub_device *sub; + int err; + + sub = kzalloc(sizeof(*sub),GFP_KERNEL); + if (NULL == sub) + return -ENOMEM; + + sub->core = core; + sub->dev.parent = &core->pci->dev; + sub->dev.bus = &bttv_sub_bus_type; + sub->dev.release = release_sub_device; + dev_set_name(&sub->dev, "%s%d", name, core->nr); + + err = device_register(&sub->dev); + if (0 != err) { + kfree(sub); + return err; + } + pr_info("%d: add subdevice \"%s\"\n", core->nr, dev_name(&sub->dev)); + list_add_tail(&sub->list,&core->subs); + return 0; +} + +int bttv_sub_del_devices(struct bttv_core *core) +{ + struct bttv_sub_device *sub, *save; + + list_for_each_entry_safe(sub, save, &core->subs, list) { + list_del(&sub->list); + device_unregister(&sub->dev); + } + return 0; +} + +/* ----------------------------------------------------------------------- */ +/* external: sub-driver register/unregister */ + +int bttv_sub_register(struct bttv_sub_driver *sub, char *wanted) +{ + sub->drv.bus = &bttv_sub_bus_type; + snprintf(sub->wanted,sizeof(sub->wanted),"%s",wanted); + return driver_register(&sub->drv); +} +EXPORT_SYMBOL(bttv_sub_register); + +int bttv_sub_unregister(struct bttv_sub_driver *sub) +{ + driver_unregister(&sub->drv); + return 0; +} +EXPORT_SYMBOL(bttv_sub_unregister); + +/* ----------------------------------------------------------------------- */ +/* external: gpio access functions */ + +void bttv_gpio_inout(struct bttv_core *core, u32 mask, u32 outbits) +{ + struct bttv *btv = container_of(core, struct bttv, c); + unsigned long flags; + u32 data; + + spin_lock_irqsave(&btv->gpio_lock,flags); + data = btread(BT848_GPIO_OUT_EN); + data = data & ~mask; + data = data | (mask & outbits); + btwrite(data,BT848_GPIO_OUT_EN); + spin_unlock_irqrestore(&btv->gpio_lock,flags); +} + +u32 bttv_gpio_read(struct bttv_core *core) +{ + struct bttv *btv = container_of(core, struct bttv, c); + u32 value; + + value = btread(BT848_GPIO_DATA); + return value; +} + +void bttv_gpio_write(struct bttv_core *core, u32 value) +{ + struct bttv *btv = container_of(core, struct bttv, c); + + btwrite(value,BT848_GPIO_DATA); +} + +void bttv_gpio_bits(struct bttv_core *core, u32 mask, u32 bits) +{ + struct bttv *btv = container_of(core, struct bttv, c); + unsigned long flags; + u32 data; + + spin_lock_irqsave(&btv->gpio_lock,flags); + data = btread(BT848_GPIO_DATA); + data = data & ~mask; + data = data | (mask & bits); + btwrite(data,BT848_GPIO_DATA); + spin_unlock_irqrestore(&btv->gpio_lock,flags); +} + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/bttv-i2c.c b/drivers/media/pci/bt8xx/bttv-i2c.c new file mode 100644 index 00000000..d43911de --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-i2c.c @@ -0,0 +1,404 @@ +/* + + bttv-i2c.c -- all the i2c code is here + + bttv - Bt848 frame grabber driver + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) + (c) 1999-2003 Gerd Knorr + + (c) 2005 Mauro Carvalho Chehab + - Multituner support and i2c address binding + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include + +#include "bttvp.h" +#include +#include +#include + +static int i2c_debug; +static int i2c_hw; +static int i2c_scan; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug, "configure i2c debug level"); +module_param(i2c_hw, int, 0444); +MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, " + "instead of software bitbang"); +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); + +static unsigned int i2c_udelay = 5; +module_param(i2c_udelay, int, 0444); +MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs " + "(should be 5 or higher). Lower value means higher bus speed."); + +/* ----------------------------------------------------------------------- */ +/* I2C functions - bitbanging adapter (software i2c) */ + +static void bttv_bit_setscl(void *data, int state) +{ + struct bttv *btv = (struct bttv*)data; + + if (state) + btv->i2c_state |= 0x02; + else + btv->i2c_state &= ~0x02; + btwrite(btv->i2c_state, BT848_I2C); + btread(BT848_I2C); +} + +static void bttv_bit_setsda(void *data, int state) +{ + struct bttv *btv = (struct bttv*)data; + + if (state) + btv->i2c_state |= 0x01; + else + btv->i2c_state &= ~0x01; + btwrite(btv->i2c_state, BT848_I2C); + btread(BT848_I2C); +} + +static int bttv_bit_getscl(void *data) +{ + struct bttv *btv = (struct bttv*)data; + int state; + + state = btread(BT848_I2C) & 0x02 ? 1 : 0; + return state; +} + +static int bttv_bit_getsda(void *data) +{ + struct bttv *btv = (struct bttv*)data; + int state; + + state = btread(BT848_I2C) & 0x01; + return state; +} + +static struct i2c_algo_bit_data bttv_i2c_algo_bit_template = { + .setsda = bttv_bit_setsda, + .setscl = bttv_bit_setscl, + .getsda = bttv_bit_getsda, + .getscl = bttv_bit_getscl, + .udelay = 16, + .timeout = 200, +}; + +/* ----------------------------------------------------------------------- */ +/* I2C functions - hardware i2c */ + +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static int +bttv_i2c_wait_done(struct bttv *btv) +{ + int rc = 0; + + /* timeout */ + if (wait_event_interruptible_timeout(btv->i2c_queue, + btv->i2c_done, msecs_to_jiffies(85)) == -ERESTARTSYS) + rc = -EIO; + + if (btv->i2c_done & BT848_INT_RACK) + rc = 1; + btv->i2c_done = 0; + return rc; +} + +#define I2C_HW (BT878_I2C_MODE | BT848_I2C_SYNC |\ + BT848_I2C_SCL | BT848_I2C_SDA) + +static int +bttv_i2c_sendbytes(struct bttv *btv, const struct i2c_msg *msg, int last) +{ + u32 xmit; + int retval,cnt; + + /* sanity checks */ + if (0 == msg->len) + return -EINVAL; + + /* start, address + first byte */ + xmit = (msg->addr << 25) | (msg->buf[0] << 16) | I2C_HW; + if (msg->len > 1 || !last) + xmit |= BT878_I2C_NOSTOP; + btwrite(xmit, BT848_I2C); + retval = bttv_i2c_wait_done(btv); + if (retval < 0) + goto err; + if (retval == 0) + goto eio; + if (i2c_debug) { + pr_cont(" addr << 1, msg->buf[0]); + } + + for (cnt = 1; cnt < msg->len; cnt++ ) { + /* following bytes */ + xmit = (msg->buf[cnt] << 24) | I2C_HW | BT878_I2C_NOSTART; + if (cnt < msg->len-1 || !last) + xmit |= BT878_I2C_NOSTOP; + btwrite(xmit, BT848_I2C); + retval = bttv_i2c_wait_done(btv); + if (retval < 0) + goto err; + if (retval == 0) + goto eio; + if (i2c_debug) + pr_cont(" %02x", msg->buf[cnt]); + } + if (i2c_debug && !(xmit & BT878_I2C_NOSTOP)) + pr_cont(">\n"); + return msg->len; + + eio: + retval = -EIO; + err: + if (i2c_debug) + pr_cont(" ERR: %d\n",retval); + return retval; +} + +static int +bttv_i2c_readbytes(struct bttv *btv, const struct i2c_msg *msg, int last) +{ + u32 xmit; + u32 cnt; + int retval; + + for (cnt = 0; cnt < msg->len; cnt++) { + xmit = (msg->addr << 25) | (1 << 24) | I2C_HW; + if (cnt < msg->len-1) + xmit |= BT848_I2C_W3B; + if (cnt < msg->len-1 || !last) + xmit |= BT878_I2C_NOSTOP; + if (cnt) + xmit |= BT878_I2C_NOSTART; + + if (i2c_debug) { + if (!(xmit & BT878_I2C_NOSTART)) + pr_cont(" addr << 1) +1); + } + + btwrite(xmit, BT848_I2C); + retval = bttv_i2c_wait_done(btv); + if (retval < 0) + goto err; + if (retval == 0) + goto eio; + msg->buf[cnt] = ((u32)btread(BT848_I2C) >> 8) & 0xff; + if (i2c_debug) { + pr_cont(" =%02x", msg->buf[cnt]); + } + if (i2c_debug && !(xmit & BT878_I2C_NOSTOP)) + pr_cont(" >\n"); + } + + + return msg->len; + + eio: + retval = -EIO; + err: + if (i2c_debug) + pr_cont(" ERR: %d\n",retval); + return retval; +} + +static int bttv_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) +{ + struct v4l2_device *v4l2_dev = i2c_get_adapdata(i2c_adap); + struct bttv *btv = to_bttv(v4l2_dev); + int retval = 0; + int i; + + if (i2c_debug) + pr_debug("bt-i2c:"); + + btwrite(BT848_INT_I2CDONE|BT848_INT_RACK, BT848_INT_STAT); + for (i = 0 ; i < num; i++) { + if (msgs[i].flags & I2C_M_RD) { + /* read */ + retval = bttv_i2c_readbytes(btv, &msgs[i], i+1 == num); + if (retval < 0) + goto err; + } else { + /* write */ + retval = bttv_i2c_sendbytes(btv, &msgs[i], i+1 == num); + if (retval < 0) + goto err; + } + } + return num; + + err: + return retval; +} + +static const struct i2c_algorithm bttv_algo = { + .master_xfer = bttv_i2c_xfer, + .functionality = functionality, +}; + +/* ----------------------------------------------------------------------- */ +/* I2C functions - common stuff */ + +/* read I2C */ +int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for) +{ + unsigned char buffer = 0; + + if (0 != btv->i2c_rc) + return -1; + if (bttv_verbose && NULL != probe_for) + pr_info("%d: i2c: checking for %s @ 0x%02x... ", + btv->c.nr, probe_for, addr); + btv->i2c_client.addr = addr >> 1; + if (1 != i2c_master_recv(&btv->i2c_client, &buffer, 1)) { + if (NULL != probe_for) { + if (bttv_verbose) + pr_cont("not found\n"); + } else + pr_warn("%d: i2c read 0x%x: error\n", + btv->c.nr, addr); + return -1; + } + if (bttv_verbose && NULL != probe_for) + pr_cont("found\n"); + return buffer; +} + +/* write I2C */ +int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1, + unsigned char b2, int both) +{ + unsigned char buffer[2]; + int bytes = both ? 2 : 1; + + if (0 != btv->i2c_rc) + return -1; + btv->i2c_client.addr = addr >> 1; + buffer[0] = b1; + buffer[1] = b2; + if (bytes != i2c_master_send(&btv->i2c_client, buffer, bytes)) + return -1; + return 0; +} + +/* read EEPROM content */ +void bttv_readee(struct bttv *btv, unsigned char *eedata, int addr) +{ + memset(eedata, 0, 256); + if (0 != btv->i2c_rc) + return; + btv->i2c_client.addr = addr >> 1; + tveeprom_read(&btv->i2c_client, eedata, 256); +} + +static char *i2c_devs[128] = { + [ 0x1c >> 1 ] = "lgdt330x", + [ 0x30 >> 1 ] = "IR (hauppauge)", + [ 0x80 >> 1 ] = "msp34xx", + [ 0x86 >> 1 ] = "tda9887", + [ 0xa0 >> 1 ] = "eeprom", + [ 0xc0 >> 1 ] = "tuner (analog)", + [ 0xc2 >> 1 ] = "tuner (analog)", +}; + +static void do_i2c_scan(char *name, struct i2c_client *c) +{ + unsigned char buf; + int i,rc; + + for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) { + c->addr = i; + rc = i2c_master_recv(c,&buf,0); + if (rc < 0) + continue; + pr_info("%s: i2c scan: found device @ 0x%x [%s]\n", + name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); + } +} + +/* init + register i2c adapter */ +int init_bttv_i2c(struct bttv *btv) +{ + strlcpy(btv->i2c_client.name, "bttv internal", I2C_NAME_SIZE); + + if (i2c_hw) + btv->use_i2c_hw = 1; + if (btv->use_i2c_hw) { + /* bt878 */ + strlcpy(btv->c.i2c_adap.name, "bt878", + sizeof(btv->c.i2c_adap.name)); + btv->c.i2c_adap.algo = &bttv_algo; + } else { + /* bt848 */ + /* Prevents usage of invalid delay values */ + if (i2c_udelay<5) + i2c_udelay=5; + + strlcpy(btv->c.i2c_adap.name, "bttv", + sizeof(btv->c.i2c_adap.name)); + btv->i2c_algo = bttv_i2c_algo_bit_template; + btv->i2c_algo.udelay = i2c_udelay; + btv->i2c_algo.data = btv; + btv->c.i2c_adap.algo_data = &btv->i2c_algo; + } + btv->c.i2c_adap.owner = THIS_MODULE; + + btv->c.i2c_adap.dev.parent = &btv->c.pci->dev; + snprintf(btv->c.i2c_adap.name, sizeof(btv->c.i2c_adap.name), + "bt%d #%d [%s]", btv->id, btv->c.nr, + btv->use_i2c_hw ? "hw" : "sw"); + + i2c_set_adapdata(&btv->c.i2c_adap, &btv->c.v4l2_dev); + btv->i2c_client.adapter = &btv->c.i2c_adap; + + + if (btv->use_i2c_hw) { + btv->i2c_rc = i2c_add_adapter(&btv->c.i2c_adap); + } else { + bttv_bit_setscl(btv,1); + bttv_bit_setsda(btv,1); + btv->i2c_rc = i2c_bit_add_bus(&btv->c.i2c_adap); + } + if (0 == btv->i2c_rc && i2c_scan) + do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client); + + return btv->i2c_rc; +} + +int fini_bttv_i2c(struct bttv *btv) +{ + if (btv->i2c_rc == 0) + i2c_del_adapter(&btv->c.i2c_adap); + + return 0; +} diff --git a/drivers/media/pci/bt8xx/bttv-if.c b/drivers/media/pci/bt8xx/bttv-if.c new file mode 100644 index 00000000..a6a540dc --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-if.c @@ -0,0 +1,121 @@ +/* + + bttv-if.c -- old gpio interface to other kernel modules + don't use in new code, will go away in 2.7 + have a look at bttv-gpio.c instead. + + bttv - Bt848 frame grabber driver + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) + (c) 1999-2003 Gerd Knorr + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include + +#include "bttvp.h" + +EXPORT_SYMBOL(bttv_get_pcidev); +EXPORT_SYMBOL(bttv_gpio_enable); +EXPORT_SYMBOL(bttv_read_gpio); +EXPORT_SYMBOL(bttv_write_gpio); + +/* ----------------------------------------------------------------------- */ +/* Exported functions - for other modules which want to access the */ +/* gpio ports (IR for example) */ +/* see bttv.h for comments */ + +struct pci_dev* bttv_get_pcidev(unsigned int card) +{ + if (card >= bttv_num) + return NULL; + if (!bttvs[card]) + return NULL; + + return bttvs[card]->c.pci; +} + + +int bttv_gpio_enable(unsigned int card, unsigned long mask, unsigned long data) +{ + struct bttv *btv; + + if (card >= bttv_num) { + return -EINVAL; + } + + btv = bttvs[card]; + if (!btv) + return -ENODEV; + + gpio_inout(mask,data); + if (bttv_gpio) + bttv_gpio_tracking(btv,"extern enable"); + return 0; +} + +int bttv_read_gpio(unsigned int card, unsigned long *data) +{ + struct bttv *btv; + + if (card >= bttv_num) { + return -EINVAL; + } + + btv = bttvs[card]; + if (!btv) + return -ENODEV; + + if(btv->shutdown) { + return -ENODEV; + } + +/* prior setting BT848_GPIO_REG_INP is (probably) not needed + because we set direct input on init */ + *data = gpio_read(); + return 0; +} + +int bttv_write_gpio(unsigned int card, unsigned long mask, unsigned long data) +{ + struct bttv *btv; + + if (card >= bttv_num) { + return -EINVAL; + } + + btv = bttvs[card]; + if (!btv) + return -ENODEV; + +/* prior setting BT848_GPIO_REG_INP is (probably) not needed + because direct input is set on init */ + gpio_bits(mask,data); + if (bttv_gpio) + bttv_gpio_tracking(btv,"extern write"); + return 0; +} + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/bttv-input.c b/drivers/media/pci/bt8xx/bttv-input.c new file mode 100644 index 00000000..f3682136 --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-input.c @@ -0,0 +1,585 @@ +/* + * + * Copyright (c) 2003 Gerd Knorr + * Copyright (c) 2003 Pavel Machek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +#include "bttv.h" +#include "bttvp.h" + + +static int ir_debug; +module_param(ir_debug, int, 0644); + +static int ir_rc5_remote_gap = 885; +module_param(ir_rc5_remote_gap, int, 0644); + +#undef dprintk +#define dprintk(fmt, ...) \ +do { \ + if (ir_debug >= 1) \ + pr_info(fmt, ##__VA_ARGS__); \ +} while (0) + +#define DEVNAME "bttv-input" + +#define MODULE_NAME "bttv" + +/* ---------------------------------------------------------------------- */ + +static void ir_handle_key(struct bttv *btv) +{ + struct bttv_ir *ir = btv->remote; + u32 gpio,data; + + /* read gpio value */ + gpio = bttv_gpio_read(&btv->c); + if (ir->polling) { + if (ir->last_gpio == gpio) + return; + ir->last_gpio = gpio; + } + + /* extract data */ + data = ir_extract_bits(gpio, ir->mask_keycode); + dprintk("irq gpio=0x%x code=%d | %s%s%s\n", + gpio, data, + ir->polling ? "poll" : "irq", + (gpio & ir->mask_keydown) ? " down" : "", + (gpio & ir->mask_keyup) ? " up" : ""); + + if ((ir->mask_keydown && (gpio & ir->mask_keydown)) || + (ir->mask_keyup && !(gpio & ir->mask_keyup))) { + rc_keydown_notimeout(ir->dev, data, 0); + } else { + /* HACK: Probably, ir->mask_keydown is missing + for this board */ + if (btv->c.type == BTTV_BOARD_WINFAST2000) + rc_keydown_notimeout(ir->dev, data, 0); + + rc_keyup(ir->dev); + } +} + +static void ir_enltv_handle_key(struct bttv *btv) +{ + struct bttv_ir *ir = btv->remote; + u32 gpio, data, keyup; + + /* read gpio value */ + gpio = bttv_gpio_read(&btv->c); + + /* extract data */ + data = ir_extract_bits(gpio, ir->mask_keycode); + + /* Check if it is keyup */ + keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0; + + if ((ir->last_gpio & 0x7f) != data) { + dprintk("gpio=0x%x code=%d | %s\n", + gpio, data, + (gpio & ir->mask_keyup) ? " up" : "up/down"); + + rc_keydown_notimeout(ir->dev, data, 0); + if (keyup) + rc_keyup(ir->dev); + } else { + if ((ir->last_gpio & 1 << 31) == keyup) + return; + + dprintk("(cnt) gpio=0x%x code=%d | %s\n", + gpio, data, + (gpio & ir->mask_keyup) ? " up" : "down"); + + if (keyup) + rc_keyup(ir->dev); + else + rc_keydown_notimeout(ir->dev, data, 0); + } + + ir->last_gpio = data | keyup; +} + +static int bttv_rc5_irq(struct bttv *btv); + +void bttv_input_irq(struct bttv *btv) +{ + struct bttv_ir *ir = btv->remote; + + if (ir->rc5_gpio) + bttv_rc5_irq(btv); + else if (!ir->polling) + ir_handle_key(btv); +} + +static void bttv_input_timer(unsigned long data) +{ + struct bttv *btv = (struct bttv*)data; + struct bttv_ir *ir = btv->remote; + + if (btv->c.type == BTTV_BOARD_ENLTV_FM_2) + ir_enltv_handle_key(btv); + else + ir_handle_key(btv); + mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling)); +} + +/* + * FIXME: Nebula digi uses the legacy way to decode RC5, instead of relying + * on the rc-core way. As we need to be sure that both IRQ transitions are + * properly triggered, Better to touch it only with this hardware for + * testing. + */ + +#define RC5_START(x) (((x) >> 12) & 3) +#define RC5_TOGGLE(x) (((x) >> 11) & 1) +#define RC5_ADDR(x) (((x) >> 6) & 31) +#define RC5_INSTR(x) ((x) & 63) + +/* decode raw bit pattern to RC5 code */ +static u32 bttv_rc5_decode(unsigned int code) +{ + unsigned int org_code = code; + unsigned int pair; + unsigned int rc5 = 0; + int i; + + for (i = 0; i < 14; ++i) { + pair = code & 0x3; + code >>= 2; + + rc5 <<= 1; + switch (pair) { + case 0: + case 2: + break; + case 1: + rc5 |= 1; + break; + case 3: + dprintk("rc5_decode(%x) bad code\n", + org_code); + return 0; + } + } + dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, " + "instr=%x\n", rc5, org_code, RC5_START(rc5), + RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5)); + return rc5; +} + +static void bttv_rc5_timer_end(unsigned long data) +{ + struct bttv_ir *ir = (struct bttv_ir *)data; + struct timeval tv; + u32 gap; + u32 rc5 = 0; + + /* get time */ + do_gettimeofday(&tv); + + /* avoid overflow with gap >1s */ + if (tv.tv_sec - ir->base_time.tv_sec > 1) { + gap = 200000; + } else { + gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + + tv.tv_usec - ir->base_time.tv_usec; + } + + /* signal we're ready to start a new code */ + ir->active = false; + + /* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */ + if (gap < 28000) { + dprintk("spurious timer_end\n"); + return; + } + + if (ir->last_bit < 20) { + /* ignore spurious codes (caused by light/other remotes) */ + dprintk("short code: %x\n", ir->code); + } else { + ir->code = (ir->code << ir->shift_by) | 1; + rc5 = bttv_rc5_decode(ir->code); + + /* two start bits? */ + if (RC5_START(rc5) != ir->start) { + pr_info(DEVNAME ":" + " rc5 start bits invalid: %u\n", RC5_START(rc5)); + + /* right address? */ + } else if (RC5_ADDR(rc5) == ir->addr) { + u32 toggle = RC5_TOGGLE(rc5); + u32 instr = RC5_INSTR(rc5); + + /* Good code */ + rc_keydown(ir->dev, instr, toggle); + dprintk("instruction %x, toggle %x\n", + instr, toggle); + } + } +} + +static int bttv_rc5_irq(struct bttv *btv) +{ + struct bttv_ir *ir = btv->remote; + struct timeval tv; + u32 gpio; + u32 gap; + unsigned long current_jiffies; + + /* read gpio port */ + gpio = bttv_gpio_read(&btv->c); + + /* get time of bit */ + current_jiffies = jiffies; + do_gettimeofday(&tv); + + /* avoid overflow with gap >1s */ + if (tv.tv_sec - ir->base_time.tv_sec > 1) { + gap = 200000; + } else { + gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + + tv.tv_usec - ir->base_time.tv_usec; + } + + dprintk("RC5 IRQ: gap %d us for %s\n", + gap, (gpio & 0x20) ? "mark" : "space"); + + /* remote IRQ? */ + if (!(gpio & 0x20)) + return 0; + + /* active code => add bit */ + if (ir->active) { + /* only if in the code (otherwise spurious IRQ or timer + late) */ + if (ir->last_bit < 28) { + ir->last_bit = (gap - ir_rc5_remote_gap / 2) / + ir_rc5_remote_gap; + ir->code |= 1 << ir->last_bit; + } + /* starting new code */ + } else { + ir->active = true; + ir->code = 0; + ir->base_time = tv; + ir->last_bit = 0; + + mod_timer(&ir->timer, current_jiffies + msecs_to_jiffies(30)); + } + + /* toggle GPIO pin 4 to reset the irq */ + bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); + bttv_gpio_write(&btv->c, gpio | (1 << 4)); + return 1; +} + +/* ---------------------------------------------------------------------- */ + +static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir) +{ + if (ir->polling) { + setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv); + ir->timer.expires = jiffies + msecs_to_jiffies(1000); + add_timer(&ir->timer); + } else if (ir->rc5_gpio) { + /* set timer_end for code completion */ + setup_timer(&ir->timer, bttv_rc5_timer_end, (unsigned long)ir); + ir->shift_by = 1; + ir->start = 3; + ir->addr = 0x0; + ir->rc5_remote_gap = ir_rc5_remote_gap; + } +} + +static void bttv_ir_stop(struct bttv *btv) +{ + if (btv->remote->polling) + del_timer_sync(&btv->remote->timer); + + if (btv->remote->rc5_gpio) { + u32 gpio; + + del_timer_sync(&btv->remote->timer); + + gpio = bttv_gpio_read(&btv->c); + bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); + } +} + +/* + * Get_key functions used by I2C remotes + */ + +static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(ir->c, &b, 1)) { + dprintk("read error\n"); + return -EIO; + } + + /* ignore 0xaa */ + if (b==0xaa) + return 0; + dprintk("key %02x\n", b); + + /* + * NOTE: + * lirc_i2c maps the pv951 code as: + * addr = 0x61D6 + * cmd = bit_reverse (b) + * So, it seems that this device uses NEC extended + * I decided to not fix the table, due to two reasons: + * 1) Without the actual device, this is only a guess; + * 2) As the addr is not reported via I2C, nor can be changed, + * the device is bound to the vendor-provided RC. + */ + + *ir_key = b; + *ir_raw = b; + return 1; +} + +/* Instantiate the I2C IR receiver device, if present */ +void init_bttv_i2c_ir(struct bttv *btv) +{ + const unsigned short addr_list[] = { + 0x1a, 0x18, 0x64, 0x30, 0x71, + I2C_CLIENT_END + }; + struct i2c_board_info info; + struct i2c_client *i2c_dev; + + if (0 != btv->i2c_rc) + return; + + memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&btv->init_data, 0, sizeof(btv->init_data)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + + switch (btv->c.type) { + case BTTV_BOARD_PV951: + btv->init_data.name = "PV951"; + btv->init_data.get_key = get_key_pv951; + btv->init_data.ir_codes = RC_MAP_PV951; + info.addr = 0x4b; + break; + } + + if (btv->init_data.name) { + info.platform_data = &btv->init_data; + i2c_dev = i2c_new_device(&btv->c.i2c_adap, &info); + } else { + /* + * The external IR receiver is at i2c address 0x34 (0x35 for + * reads). Future Hauppauge cards will have an internal + * receiver at 0x30 (0x31 for reads). In theory, both can be + * fitted, and Hauppauge suggest an external overrides an + * internal. + * That's why we probe 0x1a (~0x34) first. CB + */ + i2c_dev = i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list, NULL); + } + if (NULL == i2c_dev) + return; + +#if defined(CONFIG_MODULES) && defined(MODULE) + request_module("ir-kbd-i2c"); +#endif +} + +int bttv_input_init(struct bttv *btv) +{ + struct bttv_ir *ir; + char *ir_codes = NULL; + struct rc_dev *rc; + int err = -ENOMEM; + + if (!btv->has_remote) + return -ENODEV; + + ir = kzalloc(sizeof(*ir),GFP_KERNEL); + rc = rc_allocate_device(); + if (!ir || !rc) + goto err_out_free; + + /* detect & configure */ + switch (btv->c.type) { + case BTTV_BOARD_AVERMEDIA: + case BTTV_BOARD_AVPHONE98: + case BTTV_BOARD_AVERMEDIA98: + ir_codes = RC_MAP_AVERMEDIA; + ir->mask_keycode = 0xf88000; + ir->mask_keydown = 0x010000; + ir->polling = 50; // ms + break; + + case BTTV_BOARD_AVDVBT_761: + case BTTV_BOARD_AVDVBT_771: + ir_codes = RC_MAP_AVERMEDIA_DVBT; + ir->mask_keycode = 0x0f00c0; + ir->mask_keydown = 0x000020; + ir->polling = 50; // ms + break; + + case BTTV_BOARD_PXELVWPLTVPAK: + ir_codes = RC_MAP_PIXELVIEW; + ir->mask_keycode = 0x003e00; + ir->mask_keyup = 0x010000; + ir->polling = 50; // ms + break; + case BTTV_BOARD_PV_M4900: + case BTTV_BOARD_PV_BT878P_9B: + case BTTV_BOARD_PV_BT878P_PLUS: + ir_codes = RC_MAP_PIXELVIEW; + ir->mask_keycode = 0x001f00; + ir->mask_keyup = 0x008000; + ir->polling = 50; // ms + break; + + case BTTV_BOARD_WINFAST2000: + ir_codes = RC_MAP_WINFAST; + ir->mask_keycode = 0x1f8; + break; + case BTTV_BOARD_MAGICTVIEW061: + case BTTV_BOARD_MAGICTVIEW063: + ir_codes = RC_MAP_WINFAST; + ir->mask_keycode = 0x0008e000; + ir->mask_keydown = 0x00200000; + break; + case BTTV_BOARD_APAC_VIEWCOMP: + ir_codes = RC_MAP_APAC_VIEWCOMP; + ir->mask_keycode = 0x001f00; + ir->mask_keyup = 0x008000; + ir->polling = 50; // ms + break; + case BTTV_BOARD_ASKEY_CPH03X: + case BTTV_BOARD_CONCEPTRONIC_CTVFMI2: + case BTTV_BOARD_CONTVFMI: + ir_codes = RC_MAP_PIXELVIEW; + ir->mask_keycode = 0x001F00; + ir->mask_keyup = 0x006000; + ir->polling = 50; // ms + break; + case BTTV_BOARD_NEBULA_DIGITV: + ir_codes = RC_MAP_NEBULA; + ir->rc5_gpio = true; + break; + case BTTV_BOARD_MACHTV_MAGICTV: + ir_codes = RC_MAP_APAC_VIEWCOMP; + ir->mask_keycode = 0x001F00; + ir->mask_keyup = 0x004000; + ir->polling = 50; /* ms */ + break; + case BTTV_BOARD_KOZUMI_KTV_01C: + ir_codes = RC_MAP_PCTV_SEDNA; + ir->mask_keycode = 0x001f00; + ir->mask_keyup = 0x006000; + ir->polling = 50; /* ms */ + break; + case BTTV_BOARD_ENLTV_FM_2: + ir_codes = RC_MAP_ENCORE_ENLTV2; + ir->mask_keycode = 0x00fd00; + ir->mask_keyup = 0x000080; + ir->polling = 1; /* ms */ + ir->last_gpio = ir_extract_bits(bttv_gpio_read(&btv->c), + ir->mask_keycode); + break; + } + if (NULL == ir_codes) { + dprintk("Ooops: IR config error [card=%d]\n", btv->c.type); + err = -ENODEV; + goto err_out_free; + } + + if (ir->rc5_gpio) { + u32 gpio; + /* enable remote irq */ + bttv_gpio_inout(&btv->c, (1 << 4), 1 << 4); + gpio = bttv_gpio_read(&btv->c); + bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); + bttv_gpio_write(&btv->c, gpio | (1 << 4)); + } else { + /* init hardware-specific stuff */ + bttv_gpio_inout(&btv->c, ir->mask_keycode | ir->mask_keydown, 0); + } + + /* init input device */ + ir->dev = rc; + + snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)", + btv->c.type); + snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", + pci_name(btv->c.pci)); + + rc->input_name = ir->name; + rc->input_phys = ir->phys; + rc->input_id.bustype = BUS_PCI; + rc->input_id.version = 1; + if (btv->c.pci->subsystem_vendor) { + rc->input_id.vendor = btv->c.pci->subsystem_vendor; + rc->input_id.product = btv->c.pci->subsystem_device; + } else { + rc->input_id.vendor = btv->c.pci->vendor; + rc->input_id.product = btv->c.pci->device; + } + rc->dev.parent = &btv->c.pci->dev; + rc->map_name = ir_codes; + rc->driver_name = MODULE_NAME; + + btv->remote = ir; + bttv_ir_start(btv, ir); + + /* all done */ + err = rc_register_device(rc); + if (err) + goto err_out_stop; + + return 0; + + err_out_stop: + bttv_ir_stop(btv); + btv->remote = NULL; + err_out_free: + rc_free_device(rc); + kfree(ir); + return err; +} + +void bttv_input_fini(struct bttv *btv) +{ + if (btv->remote == NULL) + return; + + bttv_ir_stop(btv); + rc_unregister_device(btv->remote->dev); + kfree(btv->remote); + btv->remote = NULL; +} diff --git a/drivers/media/pci/bt8xx/bttv-risc.c b/drivers/media/pci/bt8xx/bttv-risc.c new file mode 100644 index 00000000..82cc47d2 --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-risc.c @@ -0,0 +1,909 @@ +/* + + bttv-risc.c -- interfaces to other kernel modules + + bttv risc code handling + - memory management + - generation + + (c) 2000-2003 Gerd Knorr + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bttvp.h" + +#define VCR_HACK_LINES 4 + +/* ---------------------------------------------------------- */ +/* risc code generators */ + +int +bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int offset, unsigned int bpl, + unsigned int padding, unsigned int skip_lines, + unsigned int store_lines) +{ + u32 instructions,line,todo; + struct scatterlist *sg; + __le32 *rp; + int rc; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + sync + jump (all 2 dwords). padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + instructions = skip_lines * 4; + instructions += (1 + ((bpl + padding) * store_lines) + / PAGE_SIZE + store_lines) * 8; + instructions += 2 * 8; + if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,instructions)) < 0) + return rc; + + /* sync instruction */ + rp = risc->cpu; + *(rp++) = cpu_to_le32(BT848_RISC_SYNC|BT848_FIFO_STATUS_FM1); + *(rp++) = cpu_to_le32(0); + + while (skip_lines-- > 0) { + *(rp++) = cpu_to_le32(BT848_RISC_SKIP | BT848_RISC_SOL | + BT848_RISC_EOL | bpl); + } + + /* scan lines */ + sg = sglist; + for (line = 0; line < store_lines; line++) { + if ((btv->opt_vcr_hack) && + (line >= (store_lines - VCR_HACK_LINES))) + continue; + while (offset && offset >= sg_dma_len(sg)) { + offset -= sg_dma_len(sg); + sg++; + } + if (bpl <= sg_dma_len(sg)-offset) { + /* fits into current chunk */ + *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_SOL| + BT848_RISC_EOL|bpl); + *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); + offset+=bpl; + } else { + /* scanline needs to be splitted */ + todo = bpl; + *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_SOL| + (sg_dma_len(sg)-offset)); + *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); + todo -= (sg_dma_len(sg)-offset); + offset = 0; + sg++; + while (todo > sg_dma_len(sg)) { + *(rp++)=cpu_to_le32(BT848_RISC_WRITE| + sg_dma_len(sg)); + *(rp++)=cpu_to_le32(sg_dma_address(sg)); + todo -= sg_dma_len(sg); + sg++; + } + *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_EOL| + todo); + *(rp++)=cpu_to_le32(sg_dma_address(sg)); + offset += todo; + } + offset += padding; + } + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} + +static int +bttv_risc_planar(struct bttv *btv, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int yoffset, unsigned int ybpl, + unsigned int ypadding, unsigned int ylines, + unsigned int uoffset, unsigned int voffset, + unsigned int hshift, unsigned int vshift, + unsigned int cpadding) +{ + unsigned int instructions,line,todo,ylen,chroma; + __le32 *rp; + u32 ri; + struct scatterlist *ysg; + struct scatterlist *usg; + struct scatterlist *vsg; + int topfield = (0 == yoffset); + int rc; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line (5 dwords) + plus sync + jump (2 dwords) */ + instructions = ((3 + (ybpl + ypadding) * ylines * 2) + / PAGE_SIZE) + ylines; + instructions += 2; + if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,instructions*4*5)) < 0) + return rc; + + /* sync instruction */ + rp = risc->cpu; + *(rp++) = cpu_to_le32(BT848_RISC_SYNC|BT848_FIFO_STATUS_FM3); + *(rp++) = cpu_to_le32(0); + + /* scan lines */ + ysg = sglist; + usg = sglist; + vsg = sglist; + for (line = 0; line < ylines; line++) { + if ((btv->opt_vcr_hack) && + (line >= (ylines - VCR_HACK_LINES))) + continue; + switch (vshift) { + case 0: + chroma = 1; + break; + case 1: + if (topfield) + chroma = ((line & 1) == 0); + else + chroma = ((line & 1) == 1); + break; + case 2: + if (topfield) + chroma = ((line & 3) == 0); + else + chroma = ((line & 3) == 2); + break; + default: + chroma = 0; + break; + } + + for (todo = ybpl; todo > 0; todo -= ylen) { + /* go to next sg entry if needed */ + while (yoffset && yoffset >= sg_dma_len(ysg)) { + yoffset -= sg_dma_len(ysg); + ysg++; + } + while (uoffset && uoffset >= sg_dma_len(usg)) { + uoffset -= sg_dma_len(usg); + usg++; + } + while (voffset && voffset >= sg_dma_len(vsg)) { + voffset -= sg_dma_len(vsg); + vsg++; + } + + /* calculate max number of bytes we can write */ + ylen = todo; + if (yoffset + ylen > sg_dma_len(ysg)) + ylen = sg_dma_len(ysg) - yoffset; + if (chroma) { + if (uoffset + (ylen>>hshift) > sg_dma_len(usg)) + ylen = (sg_dma_len(usg) - uoffset) << hshift; + if (voffset + (ylen>>hshift) > sg_dma_len(vsg)) + ylen = (sg_dma_len(vsg) - voffset) << hshift; + ri = BT848_RISC_WRITE123; + } else { + ri = BT848_RISC_WRITE1S23; + } + if (ybpl == todo) + ri |= BT848_RISC_SOL; + if (ylen == todo) + ri |= BT848_RISC_EOL; + + /* write risc instruction */ + *(rp++)=cpu_to_le32(ri | ylen); + *(rp++)=cpu_to_le32(((ylen >> hshift) << 16) | + (ylen >> hshift)); + *(rp++)=cpu_to_le32(sg_dma_address(ysg)+yoffset); + yoffset += ylen; + if (chroma) { + *(rp++)=cpu_to_le32(sg_dma_address(usg)+uoffset); + uoffset += ylen >> hshift; + *(rp++)=cpu_to_le32(sg_dma_address(vsg)+voffset); + voffset += ylen >> hshift; + } + } + yoffset += ypadding; + if (chroma) { + uoffset += cpadding; + voffset += cpadding; + } + } + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} + +static int +bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc, + const struct bttv_format *fmt, struct bttv_overlay *ov, + int skip_even, int skip_odd) +{ + int dwords, rc, line, maxy, start, end; + unsigned skip, nskips; + struct btcx_skiplist *skips; + __le32 *rp; + u32 ri,ra; + u32 addr; + + /* skip list for window clipping */ + if (NULL == (skips = kmalloc(sizeof(*skips) * ov->nclips,GFP_KERNEL))) + return -ENOMEM; + + /* estimate risc mem: worst case is (1.5*clip+1) * lines instructions + + sync + jump (all 2 dwords) */ + dwords = (3 * ov->nclips + 2) * + ((skip_even || skip_odd) ? (ov->w.height+1)>>1 : ov->w.height); + dwords += 4; + if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,dwords*4)) < 0) { + kfree(skips); + return rc; + } + + /* sync instruction */ + rp = risc->cpu; + *(rp++) = cpu_to_le32(BT848_RISC_SYNC|BT848_FIFO_STATUS_FM1); + *(rp++) = cpu_to_le32(0); + + addr = (unsigned long)btv->fbuf.base; + addr += btv->fbuf.fmt.bytesperline * ov->w.top; + addr += (fmt->depth >> 3) * ov->w.left; + + /* scan lines */ + for (maxy = -1, line = 0; line < ov->w.height; + line++, addr += btv->fbuf.fmt.bytesperline) { + if ((btv->opt_vcr_hack) && + (line >= (ov->w.height - VCR_HACK_LINES))) + continue; + if ((line%2) == 0 && skip_even) + continue; + if ((line%2) == 1 && skip_odd) + continue; + + /* calculate clipping */ + if (line > maxy) + btcx_calc_skips(line, ov->w.width, &maxy, + skips, &nskips, ov->clips, ov->nclips); + + /* write out risc code */ + for (start = 0, skip = 0; start < ov->w.width; start = end) { + if (skip >= nskips) { + ri = BT848_RISC_WRITE; + end = ov->w.width; + } else if (start < skips[skip].start) { + ri = BT848_RISC_WRITE; + end = skips[skip].start; + } else { + ri = BT848_RISC_SKIP; + end = skips[skip].end; + skip++; + } + if (BT848_RISC_WRITE == ri) + ra = addr + (fmt->depth>>3)*start; + else + ra = 0; + + if (0 == start) + ri |= BT848_RISC_SOL; + if (ov->w.width == end) + ri |= BT848_RISC_EOL; + ri |= (fmt->depth>>3) * (end-start); + + *(rp++)=cpu_to_le32(ri); + if (0 != ra) + *(rp++)=cpu_to_le32(ra); + } + } + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + kfree(skips); + return 0; +} + +/* ---------------------------------------------------------- */ + +static void +bttv_calc_geo_old(struct bttv *btv, struct bttv_geometry *geo, + int width, int height, int interleaved, + const struct bttv_tvnorm *tvnorm) +{ + u32 xsf, sr; + int vdelay; + + int swidth = tvnorm->swidth; + int totalwidth = tvnorm->totalwidth; + int scaledtwidth = tvnorm->scaledtwidth; + + if (btv->input == btv->dig) { + swidth = 720; + totalwidth = 858; + scaledtwidth = 858; + } + + vdelay = tvnorm->vdelay; + + xsf = (width*scaledtwidth)/swidth; + geo->hscale = ((totalwidth*4096UL)/xsf-4096); + geo->hdelay = tvnorm->hdelayx1; + geo->hdelay = (geo->hdelay*width)/swidth; + geo->hdelay &= 0x3fe; + sr = ((tvnorm->sheight >> (interleaved?0:1))*512)/height - 512; + geo->vscale = (0x10000UL-sr) & 0x1fff; + geo->crop = ((width>>8)&0x03) | ((geo->hdelay>>6)&0x0c) | + ((tvnorm->sheight>>4)&0x30) | ((vdelay>>2)&0xc0); + geo->vscale |= interleaved ? (BT848_VSCALE_INT<<8) : 0; + geo->vdelay = vdelay; + geo->width = width; + geo->sheight = tvnorm->sheight; + geo->vtotal = tvnorm->vtotal; + + if (btv->opt_combfilter) { + geo->vtc = (width < 193) ? 2 : ((width < 385) ? 1 : 0); + geo->comb = (width < 769) ? 1 : 0; + } else { + geo->vtc = 0; + geo->comb = 0; + } +} + +static void +bttv_calc_geo (struct bttv * btv, + struct bttv_geometry * geo, + unsigned int width, + unsigned int height, + int both_fields, + const struct bttv_tvnorm * tvnorm, + const struct v4l2_rect * crop) +{ + unsigned int c_width; + unsigned int c_height; + u32 sr; + + if ((crop->left == tvnorm->cropcap.defrect.left + && crop->top == tvnorm->cropcap.defrect.top + && crop->width == tvnorm->cropcap.defrect.width + && crop->height == tvnorm->cropcap.defrect.height + && width <= tvnorm->swidth /* see PAL-Nc et al */) + || btv->input == btv->dig) { + bttv_calc_geo_old(btv, geo, width, height, + both_fields, tvnorm); + return; + } + + /* For bug compatibility the image size checks permit scale + factors > 16. See bttv_crop_calc_limits(). */ + c_width = min((unsigned int) crop->width, width * 16); + c_height = min((unsigned int) crop->height, height * 16); + + geo->width = width; + geo->hscale = (c_width * 4096U + (width >> 1)) / width - 4096; + /* Even to store Cb first, odd for Cr. */ + geo->hdelay = ((crop->left * width + c_width) / c_width) & ~1; + + geo->sheight = c_height; + geo->vdelay = crop->top - tvnorm->cropcap.bounds.top + MIN_VDELAY; + sr = c_height >> !both_fields; + sr = (sr * 512U + (height >> 1)) / height - 512; + geo->vscale = (0x10000UL - sr) & 0x1fff; + geo->vscale |= both_fields ? (BT848_VSCALE_INT << 8) : 0; + geo->vtotal = tvnorm->vtotal; + + geo->crop = (((geo->width >> 8) & 0x03) | + ((geo->hdelay >> 6) & 0x0c) | + ((geo->sheight >> 4) & 0x30) | + ((geo->vdelay >> 2) & 0xc0)); + + if (btv->opt_combfilter) { + geo->vtc = (width < 193) ? 2 : ((width < 385) ? 1 : 0); + geo->comb = (width < 769) ? 1 : 0; + } else { + geo->vtc = 0; + geo->comb = 0; + } +} + +static void +bttv_apply_geo(struct bttv *btv, struct bttv_geometry *geo, int odd) +{ + int off = odd ? 0x80 : 0x00; + + if (geo->comb) + btor(BT848_VSCALE_COMB, BT848_E_VSCALE_HI+off); + else + btand(~BT848_VSCALE_COMB, BT848_E_VSCALE_HI+off); + + btwrite(geo->vtc, BT848_E_VTC+off); + btwrite(geo->hscale >> 8, BT848_E_HSCALE_HI+off); + btwrite(geo->hscale & 0xff, BT848_E_HSCALE_LO+off); + btaor((geo->vscale>>8), 0xe0, BT848_E_VSCALE_HI+off); + btwrite(geo->vscale & 0xff, BT848_E_VSCALE_LO+off); + btwrite(geo->width & 0xff, BT848_E_HACTIVE_LO+off); + btwrite(geo->hdelay & 0xff, BT848_E_HDELAY_LO+off); + btwrite(geo->sheight & 0xff, BT848_E_VACTIVE_LO+off); + btwrite(geo->vdelay & 0xff, BT848_E_VDELAY_LO+off); + btwrite(geo->crop, BT848_E_CROP+off); + btwrite(geo->vtotal>>8, BT848_VTOTAL_HI); + btwrite(geo->vtotal & 0xff, BT848_VTOTAL_LO); +} + +/* ---------------------------------------------------------- */ +/* risc group / risc main loop / dma management */ + +void +bttv_set_dma(struct bttv *btv, int override) +{ + unsigned long cmd; + int capctl; + + btv->cap_ctl = 0; + if (NULL != btv->curr.top) btv->cap_ctl |= 0x02; + if (NULL != btv->curr.bottom) btv->cap_ctl |= 0x01; + if (NULL != btv->cvbi) btv->cap_ctl |= 0x0c; + + capctl = 0; + capctl |= (btv->cap_ctl & 0x03) ? 0x03 : 0x00; /* capture */ + capctl |= (btv->cap_ctl & 0x0c) ? 0x0c : 0x00; /* vbi data */ + capctl |= override; + + d2printk("%d: capctl=%x lirq=%d top=%08llx/%08llx even=%08llx/%08llx\n", + btv->c.nr,capctl,btv->loop_irq, + btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0, + btv->curr.top ? (unsigned long long)btv->curr.top->top.dma : 0, + btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0, + btv->curr.bottom ? (unsigned long long)btv->curr.bottom->bottom.dma : 0); + + cmd = BT848_RISC_JUMP; + if (btv->loop_irq) { + cmd |= BT848_RISC_IRQ; + cmd |= (btv->loop_irq & 0x0f) << 16; + cmd |= (~btv->loop_irq & 0x0f) << 20; + } + if (btv->curr.frame_irq || btv->loop_irq || btv->cvbi) { + mod_timer(&btv->timeout, jiffies+BTTV_TIMEOUT); + } else { + del_timer(&btv->timeout); + } + btv->main.cpu[RISC_SLOT_LOOP] = cpu_to_le32(cmd); + + btaor(capctl, ~0x0f, BT848_CAP_CTL); + if (capctl) { + if (btv->dma_on) + return; + btwrite(btv->main.dma, BT848_RISC_STRT_ADD); + btor(3, BT848_GPIO_DMA_CTL); + btv->dma_on = 1; + } else { + if (!btv->dma_on) + return; + btand(~3, BT848_GPIO_DMA_CTL); + btv->dma_on = 0; + } + return; +} + +int +bttv_risc_init_main(struct bttv *btv) +{ + int rc; + + if ((rc = btcx_riscmem_alloc(btv->c.pci,&btv->main,PAGE_SIZE)) < 0) + return rc; + dprintk("%d: risc main @ %08llx\n", + btv->c.nr, (unsigned long long)btv->main.dma); + + btv->main.cpu[0] = cpu_to_le32(BT848_RISC_SYNC | BT848_RISC_RESYNC | + BT848_FIFO_STATUS_VRE); + btv->main.cpu[1] = cpu_to_le32(0); + btv->main.cpu[2] = cpu_to_le32(BT848_RISC_JUMP); + btv->main.cpu[3] = cpu_to_le32(btv->main.dma + (4<<2)); + + /* top field */ + btv->main.cpu[4] = cpu_to_le32(BT848_RISC_JUMP); + btv->main.cpu[5] = cpu_to_le32(btv->main.dma + (6<<2)); + btv->main.cpu[6] = cpu_to_le32(BT848_RISC_JUMP); + btv->main.cpu[7] = cpu_to_le32(btv->main.dma + (8<<2)); + + btv->main.cpu[8] = cpu_to_le32(BT848_RISC_SYNC | BT848_RISC_RESYNC | + BT848_FIFO_STATUS_VRO); + btv->main.cpu[9] = cpu_to_le32(0); + + /* bottom field */ + btv->main.cpu[10] = cpu_to_le32(BT848_RISC_JUMP); + btv->main.cpu[11] = cpu_to_le32(btv->main.dma + (12<<2)); + btv->main.cpu[12] = cpu_to_le32(BT848_RISC_JUMP); + btv->main.cpu[13] = cpu_to_le32(btv->main.dma + (14<<2)); + + /* jump back to top field */ + btv->main.cpu[14] = cpu_to_le32(BT848_RISC_JUMP); + btv->main.cpu[15] = cpu_to_le32(btv->main.dma + (0<<2)); + + return 0; +} + +int +bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc, + int irqflags) +{ + unsigned long cmd; + unsigned long next = btv->main.dma + ((slot+2) << 2); + + if (NULL == risc) { + d2printk("%d: risc=%p slot[%d]=NULL\n", btv->c.nr, risc, slot); + btv->main.cpu[slot+1] = cpu_to_le32(next); + } else { + d2printk("%d: risc=%p slot[%d]=%08llx irq=%d\n", + btv->c.nr, risc, slot, + (unsigned long long)risc->dma, irqflags); + cmd = BT848_RISC_JUMP; + if (irqflags) { + cmd |= BT848_RISC_IRQ; + cmd |= (irqflags & 0x0f) << 16; + cmd |= (~irqflags & 0x0f) << 20; + } + risc->jmp[0] = cpu_to_le32(cmd); + risc->jmp[1] = cpu_to_le32(next); + btv->main.cpu[slot+1] = cpu_to_le32(risc->dma); + } + return 0; +} + +void +bttv_dma_free(struct videobuf_queue *q,struct bttv *btv, struct bttv_buffer *buf) +{ + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + BUG_ON(in_interrupt()); + videobuf_waiton(q, &buf->vb, 0, 0); + videobuf_dma_unmap(q->dev, dma); + videobuf_dma_free(dma); + btcx_riscmem_free(btv->c.pci,&buf->bottom); + btcx_riscmem_free(btv->c.pci,&buf->top); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +int +bttv_buffer_activate_vbi(struct bttv *btv, + struct bttv_buffer *vbi) +{ + struct btcx_riscmem *top; + struct btcx_riscmem *bottom; + int top_irq_flags; + int bottom_irq_flags; + + top = NULL; + bottom = NULL; + top_irq_flags = 0; + bottom_irq_flags = 0; + + if (vbi) { + unsigned int crop, vdelay; + + vbi->vb.state = VIDEOBUF_ACTIVE; + list_del(&vbi->vb.queue); + + /* VDELAY is start of video, end of VBI capturing. */ + crop = btread(BT848_E_CROP); + vdelay = btread(BT848_E_VDELAY_LO) + ((crop & 0xc0) << 2); + + if (vbi->geo.vdelay > vdelay) { + vdelay = vbi->geo.vdelay & 0xfe; + crop = (crop & 0x3f) | ((vbi->geo.vdelay >> 2) & 0xc0); + + btwrite(vdelay, BT848_E_VDELAY_LO); + btwrite(crop, BT848_E_CROP); + btwrite(vdelay, BT848_O_VDELAY_LO); + btwrite(crop, BT848_O_CROP); + } + + if (vbi->vbi_count[0] > 0) { + top = &vbi->top; + top_irq_flags = 4; + } + + if (vbi->vbi_count[1] > 0) { + top_irq_flags = 0; + bottom = &vbi->bottom; + bottom_irq_flags = 4; + } + } + + bttv_risc_hook(btv, RISC_SLOT_O_VBI, top, top_irq_flags); + bttv_risc_hook(btv, RISC_SLOT_E_VBI, bottom, bottom_irq_flags); + + return 0; +} + +int +bttv_buffer_activate_video(struct bttv *btv, + struct bttv_buffer_set *set) +{ + /* video capture */ + if (NULL != set->top && NULL != set->bottom) { + if (set->top == set->bottom) { + set->top->vb.state = VIDEOBUF_ACTIVE; + if (set->top->vb.queue.next) + list_del(&set->top->vb.queue); + } else { + set->top->vb.state = VIDEOBUF_ACTIVE; + set->bottom->vb.state = VIDEOBUF_ACTIVE; + if (set->top->vb.queue.next) + list_del(&set->top->vb.queue); + if (set->bottom->vb.queue.next) + list_del(&set->bottom->vb.queue); + } + bttv_apply_geo(btv, &set->top->geo, 1); + bttv_apply_geo(btv, &set->bottom->geo,0); + bttv_risc_hook(btv, RISC_SLOT_O_FIELD, &set->top->top, + set->top_irq); + bttv_risc_hook(btv, RISC_SLOT_E_FIELD, &set->bottom->bottom, + set->frame_irq); + btaor((set->top->btformat & 0xf0) | (set->bottom->btformat & 0x0f), + ~0xff, BT848_COLOR_FMT); + btaor((set->top->btswap & 0x0a) | (set->bottom->btswap & 0x05), + ~0x0f, BT848_COLOR_CTL); + } else if (NULL != set->top) { + set->top->vb.state = VIDEOBUF_ACTIVE; + if (set->top->vb.queue.next) + list_del(&set->top->vb.queue); + bttv_apply_geo(btv, &set->top->geo,1); + bttv_apply_geo(btv, &set->top->geo,0); + bttv_risc_hook(btv, RISC_SLOT_O_FIELD, &set->top->top, + set->frame_irq); + bttv_risc_hook(btv, RISC_SLOT_E_FIELD, NULL, 0); + btaor(set->top->btformat & 0xff, ~0xff, BT848_COLOR_FMT); + btaor(set->top->btswap & 0x0f, ~0x0f, BT848_COLOR_CTL); + } else if (NULL != set->bottom) { + set->bottom->vb.state = VIDEOBUF_ACTIVE; + if (set->bottom->vb.queue.next) + list_del(&set->bottom->vb.queue); + bttv_apply_geo(btv, &set->bottom->geo,1); + bttv_apply_geo(btv, &set->bottom->geo,0); + bttv_risc_hook(btv, RISC_SLOT_O_FIELD, NULL, 0); + bttv_risc_hook(btv, RISC_SLOT_E_FIELD, &set->bottom->bottom, + set->frame_irq); + btaor(set->bottom->btformat & 0xff, ~0xff, BT848_COLOR_FMT); + btaor(set->bottom->btswap & 0x0f, ~0x0f, BT848_COLOR_CTL); + } else { + bttv_risc_hook(btv, RISC_SLOT_O_FIELD, NULL, 0); + bttv_risc_hook(btv, RISC_SLOT_E_FIELD, NULL, 0); + } + return 0; +} + +/* ---------------------------------------------------------- */ + +/* calculate geometry, build risc code */ +int +bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf) +{ + const struct bttv_tvnorm *tvnorm = bttv_tvnorms + buf->tvnorm; + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + dprintk("%d: buffer field: %s format: %s size: %dx%d\n", + btv->c.nr, v4l2_field_names[buf->vb.field], + buf->fmt->name, buf->vb.width, buf->vb.height); + + /* packed pixel modes */ + if (buf->fmt->flags & FORMAT_FLAGS_PACKED) { + int bpl = (buf->fmt->depth >> 3) * buf->vb.width; + int bpf = bpl * (buf->vb.height >> 1); + + bttv_calc_geo(btv,&buf->geo,buf->vb.width,buf->vb.height, + V4L2_FIELD_HAS_BOTH(buf->vb.field), + tvnorm,&buf->crop); + + switch (buf->vb.field) { + case V4L2_FIELD_TOP: + bttv_risc_packed(btv,&buf->top,dma->sglist, + /* offset */ 0,bpl, + /* padding */ 0,/* skip_lines */ 0, + buf->vb.height); + break; + case V4L2_FIELD_BOTTOM: + bttv_risc_packed(btv,&buf->bottom,dma->sglist, + 0,bpl,0,0,buf->vb.height); + break; + case V4L2_FIELD_INTERLACED: + bttv_risc_packed(btv,&buf->top,dma->sglist, + 0,bpl,bpl,0,buf->vb.height >> 1); + bttv_risc_packed(btv,&buf->bottom,dma->sglist, + bpl,bpl,bpl,0,buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_TB: + bttv_risc_packed(btv,&buf->top,dma->sglist, + 0,bpl,0,0,buf->vb.height >> 1); + bttv_risc_packed(btv,&buf->bottom,dma->sglist, + bpf,bpl,0,0,buf->vb.height >> 1); + break; + default: + BUG(); + } + } + + /* planar modes */ + if (buf->fmt->flags & FORMAT_FLAGS_PLANAR) { + int uoffset, voffset; + int ypadding, cpadding, lines; + + /* calculate chroma offsets */ + uoffset = buf->vb.width * buf->vb.height; + voffset = buf->vb.width * buf->vb.height; + if (buf->fmt->flags & FORMAT_FLAGS_CrCb) { + /* Y-Cr-Cb plane order */ + uoffset >>= buf->fmt->hshift; + uoffset >>= buf->fmt->vshift; + uoffset += voffset; + } else { + /* Y-Cb-Cr plane order */ + voffset >>= buf->fmt->hshift; + voffset >>= buf->fmt->vshift; + voffset += uoffset; + } + + switch (buf->vb.field) { + case V4L2_FIELD_TOP: + bttv_calc_geo(btv,&buf->geo,buf->vb.width, + buf->vb.height,/* both_fields */ 0, + tvnorm,&buf->crop); + bttv_risc_planar(btv, &buf->top, dma->sglist, + 0,buf->vb.width,0,buf->vb.height, + uoffset,voffset,buf->fmt->hshift, + buf->fmt->vshift,0); + break; + case V4L2_FIELD_BOTTOM: + bttv_calc_geo(btv,&buf->geo,buf->vb.width, + buf->vb.height,0, + tvnorm,&buf->crop); + bttv_risc_planar(btv, &buf->bottom, dma->sglist, + 0,buf->vb.width,0,buf->vb.height, + uoffset,voffset,buf->fmt->hshift, + buf->fmt->vshift,0); + break; + case V4L2_FIELD_INTERLACED: + bttv_calc_geo(btv,&buf->geo,buf->vb.width, + buf->vb.height,1, + tvnorm,&buf->crop); + lines = buf->vb.height >> 1; + ypadding = buf->vb.width; + cpadding = buf->vb.width >> buf->fmt->hshift; + bttv_risc_planar(btv,&buf->top, + dma->sglist, + 0,buf->vb.width,ypadding,lines, + uoffset,voffset, + buf->fmt->hshift, + buf->fmt->vshift, + cpadding); + bttv_risc_planar(btv,&buf->bottom, + dma->sglist, + ypadding,buf->vb.width,ypadding,lines, + uoffset+cpadding, + voffset+cpadding, + buf->fmt->hshift, + buf->fmt->vshift, + cpadding); + break; + case V4L2_FIELD_SEQ_TB: + bttv_calc_geo(btv,&buf->geo,buf->vb.width, + buf->vb.height,1, + tvnorm,&buf->crop); + lines = buf->vb.height >> 1; + ypadding = buf->vb.width; + cpadding = buf->vb.width >> buf->fmt->hshift; + bttv_risc_planar(btv,&buf->top, + dma->sglist, + 0,buf->vb.width,0,lines, + uoffset >> 1, + voffset >> 1, + buf->fmt->hshift, + buf->fmt->vshift, + 0); + bttv_risc_planar(btv,&buf->bottom, + dma->sglist, + lines * ypadding,buf->vb.width,0,lines, + lines * ypadding + (uoffset >> 1), + lines * ypadding + (voffset >> 1), + buf->fmt->hshift, + buf->fmt->vshift, + 0); + break; + default: + BUG(); + } + } + + /* raw data */ + if (buf->fmt->flags & FORMAT_FLAGS_RAW) { + /* build risc code */ + buf->vb.field = V4L2_FIELD_SEQ_TB; + bttv_calc_geo(btv,&buf->geo,tvnorm->swidth,tvnorm->sheight, + 1,tvnorm,&buf->crop); + bttv_risc_packed(btv, &buf->top, dma->sglist, + /* offset */ 0, RAW_BPL, /* padding */ 0, + /* skip_lines */ 0, RAW_LINES); + bttv_risc_packed(btv, &buf->bottom, dma->sglist, + buf->vb.size/2 , RAW_BPL, 0, 0, RAW_LINES); + } + + /* copy format info */ + buf->btformat = buf->fmt->btformat; + buf->btswap = buf->fmt->btswap; + return 0; +} + +/* ---------------------------------------------------------- */ + +/* calculate geometry, build risc code */ +int +bttv_overlay_risc(struct bttv *btv, + struct bttv_overlay *ov, + const struct bttv_format *fmt, + struct bttv_buffer *buf) +{ + /* check interleave, bottom+top fields */ + dprintk("%d: overlay fields: %s format: %s size: %dx%d\n", + btv->c.nr, v4l2_field_names[buf->vb.field], + fmt->name, ov->w.width, ov->w.height); + + /* calculate geometry */ + bttv_calc_geo(btv,&buf->geo,ov->w.width,ov->w.height, + V4L2_FIELD_HAS_BOTH(ov->field), + &bttv_tvnorms[ov->tvnorm],&buf->crop); + + /* build risc code */ + switch (ov->field) { + case V4L2_FIELD_TOP: + bttv_risc_overlay(btv, &buf->top, fmt, ov, 0, 0); + break; + case V4L2_FIELD_BOTTOM: + bttv_risc_overlay(btv, &buf->bottom, fmt, ov, 0, 0); + break; + case V4L2_FIELD_INTERLACED: + bttv_risc_overlay(btv, &buf->top, fmt, ov, 0, 1); + bttv_risc_overlay(btv, &buf->bottom, fmt, ov, 1, 0); + break; + default: + BUG(); + } + + /* copy format info */ + buf->btformat = fmt->btformat; + buf->btswap = fmt->btswap; + buf->vb.field = ov->field; + return 0; +} + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/bttv-vbi.c b/drivers/media/pci/bt8xx/bttv-vbi.c new file mode 100644 index 00000000..b433267d --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-vbi.c @@ -0,0 +1,459 @@ +/* + + bttv - Bt848 frame grabber driver + vbi interface + + (c) 2002 Gerd Knorr + + Copyright (C) 2005, 2006 Michael H. Schimek + Sponsored by OPQ Systems AB + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include "bttvp.h" + +/* Offset from line sync pulse leading edge (0H) to start of VBI capture, + in fCLKx2 pixels. According to the datasheet, VBI capture starts + VBI_HDELAY fCLKx1 pixels from the tailing edgeof /HRESET, and /HRESET + is 64 fCLKx1 pixels wide. VBI_HDELAY is set to 0, so this should be + (64 + 0) * 2 = 128 fCLKx2 pixels. But it's not! The datasheet is + Just Plain Wrong. The real value appears to be different for + different revisions of the bt8x8 chips, and to be affected by the + horizontal scaling factor. Experimentally, the value is measured + to be about 244. */ +#define VBI_OFFSET 244 + +/* 2048 for compatibility with earlier driver versions. The driver + really stores 1024 + tvnorm->vbipack * 4 samples per line in the + buffer. Note tvnorm->vbipack is <= 0xFF (limit of VBIPACK_LO + HI + is 0x1FF DWORDs) and VBI read()s store a frame counter in the last + four bytes of the VBI image. */ +#define VBI_BPL 2048 + +/* Compatibility. */ +#define VBI_DEFLINES 16 + +static unsigned int vbibufs = 4; +static unsigned int vbi_debug; + +module_param(vbibufs, int, 0444); +module_param(vbi_debug, int, 0644); +MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32, default 4"); +MODULE_PARM_DESC(vbi_debug,"vbi code debug messages, default is 0 (no)"); + +#ifdef dprintk +# undef dprintk +#endif +#define dprintk(fmt, ...) \ +do { \ + if (vbi_debug) \ + pr_debug("%d: " fmt, btv->c.nr, ##__VA_ARGS__); \ +} while (0) + +#define IMAGE_SIZE(fmt) \ + (((fmt)->count[0] + (fmt)->count[1]) * (fmt)->samples_per_line) + +/* ----------------------------------------------------------------------- */ +/* vbi risc code + mm */ + +static int vbi_buffer_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct bttv_fh *fh = q->priv_data; + struct bttv *btv = fh->btv; + + if (0 == *count) + *count = vbibufs; + + *size = IMAGE_SIZE(&fh->vbi_fmt.fmt); + + dprintk("setup: samples=%u start=%d,%d count=%u,%u\n", + fh->vbi_fmt.fmt.samples_per_line, + fh->vbi_fmt.fmt.start[0], + fh->vbi_fmt.fmt.start[1], + fh->vbi_fmt.fmt.count[0], + fh->vbi_fmt.fmt.count[1]); + + return 0; +} + +static int vbi_buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct bttv_fh *fh = q->priv_data; + struct bttv *btv = fh->btv; + struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); + const struct bttv_tvnorm *tvnorm; + unsigned int skip_lines0, skip_lines1, min_vdelay; + int redo_dma_risc; + int rc; + + buf->vb.size = IMAGE_SIZE(&fh->vbi_fmt.fmt); + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + tvnorm = fh->vbi_fmt.tvnorm; + + /* There's no VBI_VDELAY register, RISC must skip the lines + we don't want. With default parameters we skip zero lines + as earlier driver versions did. The driver permits video + standard changes while capturing, so we use vbi_fmt.tvnorm + instead of btv->tvnorm to skip zero lines after video + standard changes as well. */ + + skip_lines0 = 0; + skip_lines1 = 0; + + if (fh->vbi_fmt.fmt.count[0] > 0) + skip_lines0 = max(0, (fh->vbi_fmt.fmt.start[0] + - tvnorm->vbistart[0])); + if (fh->vbi_fmt.fmt.count[1] > 0) + skip_lines1 = max(0, (fh->vbi_fmt.fmt.start[1] + - tvnorm->vbistart[1])); + + redo_dma_risc = 0; + + if (buf->vbi_skip[0] != skip_lines0 || + buf->vbi_skip[1] != skip_lines1 || + buf->vbi_count[0] != fh->vbi_fmt.fmt.count[0] || + buf->vbi_count[1] != fh->vbi_fmt.fmt.count[1]) { + buf->vbi_skip[0] = skip_lines0; + buf->vbi_skip[1] = skip_lines1; + buf->vbi_count[0] = fh->vbi_fmt.fmt.count[0]; + buf->vbi_count[1] = fh->vbi_fmt.fmt.count[1]; + redo_dma_risc = 1; + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + redo_dma_risc = 1; + if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL))) + goto fail; + } + + if (redo_dma_risc) { + unsigned int bpl, padding, offset; + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + bpl = 2044; /* max. vbipack */ + padding = VBI_BPL - bpl; + + if (fh->vbi_fmt.fmt.count[0] > 0) { + rc = bttv_risc_packed(btv, &buf->top, + dma->sglist, + /* offset */ 0, bpl, + padding, skip_lines0, + fh->vbi_fmt.fmt.count[0]); + if (0 != rc) + goto fail; + } + + if (fh->vbi_fmt.fmt.count[1] > 0) { + offset = fh->vbi_fmt.fmt.count[0] * VBI_BPL; + + rc = bttv_risc_packed(btv, &buf->bottom, + dma->sglist, + offset, bpl, + padding, skip_lines1, + fh->vbi_fmt.fmt.count[1]); + if (0 != rc) + goto fail; + } + } + + /* VBI capturing ends at VDELAY, start of video capturing, + no matter where the RISC program ends. VDELAY minimum is 2, + bounds.top is the corresponding first field line number + times two. VDELAY counts half field lines. */ + min_vdelay = MIN_VDELAY; + if (fh->vbi_fmt.end >= tvnorm->cropcap.bounds.top) + min_vdelay += fh->vbi_fmt.end - tvnorm->cropcap.bounds.top; + + /* For bttv_buffer_activate_vbi(). */ + buf->geo.vdelay = min_vdelay; + + buf->vb.state = VIDEOBUF_PREPARED; + buf->vb.field = field; + dprintk("buf prepare %p: top=%p bottom=%p field=%s\n", + vb, &buf->top, &buf->bottom, + v4l2_field_names[buf->vb.field]); + return 0; + + fail: + bttv_dma_free(q,btv,buf); + return rc; +} + +static void +vbi_buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct bttv_fh *fh = q->priv_data; + struct bttv *btv = fh->btv; + struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); + + dprintk("queue %p\n",vb); + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue,&btv->vcapture); + if (NULL == btv->cvbi) { + fh->btv->loop_irq |= 4; + bttv_set_dma(btv,0x0c); + } +} + +static void vbi_buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct bttv_fh *fh = q->priv_data; + struct bttv *btv = fh->btv; + struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); + + dprintk("free %p\n",vb); + bttv_dma_free(q,fh->btv,buf); +} + +struct videobuf_queue_ops bttv_vbi_qops = { + .buf_setup = vbi_buffer_setup, + .buf_prepare = vbi_buffer_prepare, + .buf_queue = vbi_buffer_queue, + .buf_release = vbi_buffer_release, +}; + +/* ----------------------------------------------------------------------- */ + +static int try_fmt(struct v4l2_vbi_format *f, const struct bttv_tvnorm *tvnorm, + __s32 crop_start) +{ + __s32 min_start, max_start, max_end, f2_offset; + unsigned int i; + + /* For compatibility with earlier driver versions we must pretend + the VBI and video capture window may overlap. In reality RISC + magic aborts VBI capturing at the first line of video capturing, + leaving the rest of the buffer unchanged, usually all zero. + VBI capturing must always start before video capturing. >> 1 + because cropping counts field lines times two. */ + min_start = tvnorm->vbistart[0]; + max_start = (crop_start >> 1) - 1; + max_end = (tvnorm->cropcap.bounds.top + + tvnorm->cropcap.bounds.height) >> 1; + + if (min_start > max_start) + return -EBUSY; + + BUG_ON(max_start >= max_end); + + f->sampling_rate = tvnorm->Fsc; + f->samples_per_line = VBI_BPL; + f->sample_format = V4L2_PIX_FMT_GREY; + f->offset = VBI_OFFSET; + + f2_offset = tvnorm->vbistart[1] - tvnorm->vbistart[0]; + + for (i = 0; i < 2; ++i) { + if (0 == f->count[i]) { + /* No data from this field. We leave f->start[i] + alone because VIDIOCSVBIFMT is w/o and EINVALs + when a driver does not support exactly the + requested parameters. */ + } else { + s64 start, count; + + start = clamp(f->start[i], min_start, max_start); + /* s64 to prevent overflow. */ + count = (s64) f->start[i] + f->count[i] - start; + f->start[i] = start; + f->count[i] = clamp(count, (s64) 1, + max_end - start); + } + + min_start += f2_offset; + max_start += f2_offset; + max_end += f2_offset; + } + + if (0 == (f->count[0] | f->count[1])) { + /* As in earlier driver versions. */ + f->start[0] = tvnorm->vbistart[0]; + f->start[1] = tvnorm->vbistart[1]; + f->count[0] = 1; + f->count[1] = 1; + } + + f->flags = 0; + + f->reserved[0] = 0; + f->reserved[1] = 0; + + return 0; +} + +int bttv_try_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + const struct bttv_tvnorm *tvnorm; + __s32 crop_start; + + mutex_lock(&btv->lock); + + tvnorm = &bttv_tvnorms[btv->tvnorm]; + crop_start = btv->crop_start; + + mutex_unlock(&btv->lock); + + return try_fmt(&frt->fmt.vbi, tvnorm, crop_start); +} + + +int bttv_s_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + const struct bttv_tvnorm *tvnorm; + __s32 start1, end; + int rc; + + mutex_lock(&btv->lock); + + rc = -EBUSY; + if (fh->resources & RESOURCE_VBI) + goto fail; + + tvnorm = &bttv_tvnorms[btv->tvnorm]; + + rc = try_fmt(&frt->fmt.vbi, tvnorm, btv->crop_start); + if (0 != rc) + goto fail; + + start1 = frt->fmt.vbi.start[1] - tvnorm->vbistart[1] + + tvnorm->vbistart[0]; + + /* First possible line of video capturing. Should be + max(f->start[0] + f->count[0], start1 + f->count[1]) * 2 + when capturing both fields. But for compatibility we must + pretend the VBI and video capture window may overlap, + so end = start + 1, the lowest possible value, times two + because vbi_fmt.end counts field lines times two. */ + end = max(frt->fmt.vbi.start[0], start1) * 2 + 2; + + mutex_lock(&fh->vbi.vb_lock); + + fh->vbi_fmt.fmt = frt->fmt.vbi; + fh->vbi_fmt.tvnorm = tvnorm; + fh->vbi_fmt.end = end; + + mutex_unlock(&fh->vbi.vb_lock); + + rc = 0; + + fail: + mutex_unlock(&btv->lock); + + return rc; +} + + +int bttv_g_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt) +{ + struct bttv_fh *fh = f; + const struct bttv_tvnorm *tvnorm; + + frt->fmt.vbi = fh->vbi_fmt.fmt; + + tvnorm = &bttv_tvnorms[fh->btv->tvnorm]; + + if (tvnorm != fh->vbi_fmt.tvnorm) { + __s32 max_end; + unsigned int i; + + /* As in vbi_buffer_prepare() this imitates the + behaviour of earlier driver versions after video + standard changes, with default parameters anyway. */ + + max_end = (tvnorm->cropcap.bounds.top + + tvnorm->cropcap.bounds.height) >> 1; + + frt->fmt.vbi.sampling_rate = tvnorm->Fsc; + + for (i = 0; i < 2; ++i) { + __s32 new_start; + + new_start = frt->fmt.vbi.start[i] + + tvnorm->vbistart[i] + - fh->vbi_fmt.tvnorm->vbistart[i]; + + frt->fmt.vbi.start[i] = min(new_start, max_end - 1); + frt->fmt.vbi.count[i] = + min((__s32) frt->fmt.vbi.count[i], + max_end - frt->fmt.vbi.start[i]); + + max_end += tvnorm->vbistart[1] + - tvnorm->vbistart[0]; + } + } + return 0; +} + +void bttv_vbi_fmt_reset(struct bttv_vbi_fmt *f, unsigned int norm) +{ + const struct bttv_tvnorm *tvnorm; + unsigned int real_samples_per_line; + unsigned int real_count; + + tvnorm = &bttv_tvnorms[norm]; + + f->fmt.sampling_rate = tvnorm->Fsc; + f->fmt.samples_per_line = VBI_BPL; + f->fmt.sample_format = V4L2_PIX_FMT_GREY; + f->fmt.offset = VBI_OFFSET; + f->fmt.start[0] = tvnorm->vbistart[0]; + f->fmt.start[1] = tvnorm->vbistart[1]; + f->fmt.count[0] = VBI_DEFLINES; + f->fmt.count[1] = VBI_DEFLINES; + f->fmt.flags = 0; + f->fmt.reserved[0] = 0; + f->fmt.reserved[1] = 0; + + /* For compatibility the buffer size must be 2 * VBI_DEFLINES * + VBI_BPL regardless of the current video standard. */ + real_samples_per_line = 1024 + tvnorm->vbipack * 4; + real_count = ((tvnorm->cropcap.defrect.top >> 1) + - tvnorm->vbistart[0]); + + BUG_ON(real_samples_per_line > VBI_BPL); + BUG_ON(real_count > VBI_DEFLINES); + + f->tvnorm = tvnorm; + + /* See bttv_vbi_fmt_set(). */ + f->end = tvnorm->vbistart[0] * 2 + 2; +} + +/* ----------------------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/bttv.h b/drivers/media/pci/bt8xx/bttv.h new file mode 100644 index 00000000..6139ce26 --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv.h @@ -0,0 +1,379 @@ +/* + * + * bttv - Bt848 frame grabber driver + * + * card ID's and external interfaces of the bttv driver + * basically stuff needed by other drivers (i2c, lirc, ...) + * and is supported not to change much over time. + * + * Copyright (C) 1996,97 Ralph Metzler (rjkm@thp.uni-koeln.de) + * (c) 1999,2000 Gerd Knorr + * + */ + +#ifndef _BTTV_H_ +#define _BTTV_H_ + +#include +#include +#include +#include +#include + +/* ---------------------------------------------------------- */ +/* exported by bttv-cards.c */ + +#define BTTV_BOARD_UNKNOWN 0x00 +#define BTTV_BOARD_MIRO 0x01 +#define BTTV_BOARD_HAUPPAUGE 0x02 +#define BTTV_BOARD_STB 0x03 +#define BTTV_BOARD_INTEL 0x04 +#define BTTV_BOARD_DIAMOND 0x05 +#define BTTV_BOARD_AVERMEDIA 0x06 +#define BTTV_BOARD_MATRIX_VISION 0x07 +#define BTTV_BOARD_FLYVIDEO 0x08 +#define BTTV_BOARD_TURBOTV 0x09 +#define BTTV_BOARD_HAUPPAUGE878 0x0a +#define BTTV_BOARD_MIROPRO 0x0b +#define BTTV_BOARD_ADSTECH_TV 0x0c +#define BTTV_BOARD_AVERMEDIA98 0x0d +#define BTTV_BOARD_VHX 0x0e +#define BTTV_BOARD_ZOLTRIX 0x0f +#define BTTV_BOARD_PIXVIEWPLAYTV 0x10 +#define BTTV_BOARD_WINVIEW_601 0x11 +#define BTTV_BOARD_AVEC_INTERCAP 0x12 +#define BTTV_BOARD_LIFE_FLYKIT 0x13 +#define BTTV_BOARD_CEI_RAFFLES 0x14 +#define BTTV_BOARD_CONFERENCETV 0x15 +#define BTTV_BOARD_PHOEBE_TVMAS 0x16 +#define BTTV_BOARD_MODTEC_205 0x17 +#define BTTV_BOARD_MAGICTVIEW061 0x18 +#define BTTV_BOARD_VOBIS_BOOSTAR 0x19 +#define BTTV_BOARD_HAUPPAUG_WCAM 0x1a +#define BTTV_BOARD_MAXI 0x1b +#define BTTV_BOARD_TERRATV 0x1c +#define BTTV_BOARD_PXC200 0x1d +#define BTTV_BOARD_FLYVIDEO_98 0x1e +#define BTTV_BOARD_IPROTV 0x1f +#define BTTV_BOARD_INTEL_C_S_PCI 0x20 +#define BTTV_BOARD_TERRATVALUE 0x21 +#define BTTV_BOARD_WINFAST2000 0x22 +#define BTTV_BOARD_CHRONOS_VS2 0x23 +#define BTTV_BOARD_TYPHOON_TVIEW 0x24 +#define BTTV_BOARD_PXELVWPLTVPRO 0x25 +#define BTTV_BOARD_MAGICTVIEW063 0x26 +#define BTTV_BOARD_PINNACLE 0x27 +#define BTTV_BOARD_STB2 0x28 +#define BTTV_BOARD_AVPHONE98 0x29 +#define BTTV_BOARD_PV951 0x2a +#define BTTV_BOARD_ONAIR_TV 0x2b +#define BTTV_BOARD_SIGMA_TVII_FM 0x2c +#define BTTV_BOARD_MATRIX_VISION2 0x2d +#define BTTV_BOARD_ZOLTRIX_GENIE 0x2e +#define BTTV_BOARD_TERRATVRADIO 0x2f +#define BTTV_BOARD_DYNALINK 0x30 +#define BTTV_BOARD_GVBCTV3PCI 0x31 +#define BTTV_BOARD_PXELVWPLTVPAK 0x32 +#define BTTV_BOARD_EAGLE 0x33 +#define BTTV_BOARD_PINNACLEPRO 0x34 +#define BTTV_BOARD_TVIEW_RDS_FM 0x35 +#define BTTV_BOARD_LIFETEC_9415 0x36 +#define BTTV_BOARD_BESTBUY_EASYTV 0x37 +#define BTTV_BOARD_FLYVIDEO_98FM 0x38 +#define BTTV_BOARD_GRANDTEC 0x39 +#define BTTV_BOARD_ASKEY_CPH060 0x3a +#define BTTV_BOARD_ASKEY_CPH03X 0x3b +#define BTTV_BOARD_MM100PCTV 0x3c +#define BTTV_BOARD_GMV1 0x3d +#define BTTV_BOARD_BESTBUY_EASYTV2 0x3e +#define BTTV_BOARD_ATI_TVWONDER 0x3f +#define BTTV_BOARD_ATI_TVWONDERVE 0x40 +#define BTTV_BOARD_FLYVIDEO2000 0x41 +#define BTTV_BOARD_TERRATVALUER 0x42 +#define BTTV_BOARD_GVBCTV4PCI 0x43 +#define BTTV_BOARD_VOODOOTV_FM 0x44 +#define BTTV_BOARD_AIMMS 0x45 +#define BTTV_BOARD_PV_BT878P_PLUS 0x46 +#define BTTV_BOARD_FLYVIDEO98EZ 0x47 +#define BTTV_BOARD_PV_BT878P_9B 0x48 +#define BTTV_BOARD_SENSORAY311_611 0x49 +#define BTTV_BOARD_RV605 0x4a +#define BTTV_BOARD_POWERCLR_MTV878 0x4b +#define BTTV_BOARD_WINDVR 0x4c +#define BTTV_BOARD_GRANDTEC_MULTI 0x4d +#define BTTV_BOARD_KWORLD 0x4e +#define BTTV_BOARD_DSP_TCVIDEO 0x4f +#define BTTV_BOARD_HAUPPAUGEPVR 0x50 +#define BTTV_BOARD_GVBCTV5PCI 0x51 +#define BTTV_BOARD_OSPREY1x0 0x52 +#define BTTV_BOARD_OSPREY1x0_848 0x53 +#define BTTV_BOARD_OSPREY101_848 0x54 +#define BTTV_BOARD_OSPREY1x1 0x55 +#define BTTV_BOARD_OSPREY1x1_SVID 0x56 +#define BTTV_BOARD_OSPREY2xx 0x57 +#define BTTV_BOARD_OSPREY2x0_SVID 0x58 +#define BTTV_BOARD_OSPREY2x0 0x59 +#define BTTV_BOARD_OSPREY500 0x5a +#define BTTV_BOARD_OSPREY540 0x5b +#define BTTV_BOARD_OSPREY2000 0x5c +#define BTTV_BOARD_IDS_EAGLE 0x5d +#define BTTV_BOARD_PINNACLESAT 0x5e +#define BTTV_BOARD_FORMAC_PROTV 0x5f +#define BTTV_BOARD_MACHTV 0x60 +#define BTTV_BOARD_EURESYS_PICOLO 0x61 +#define BTTV_BOARD_PV150 0x62 +#define BTTV_BOARD_AD_TVK503 0x63 +#define BTTV_BOARD_HERCULES_SM_TV 0x64 +#define BTTV_BOARD_PACETV 0x65 +#define BTTV_BOARD_IVC200 0x66 +#define BTTV_BOARD_XGUARD 0x67 +#define BTTV_BOARD_NEBULA_DIGITV 0x68 +#define BTTV_BOARD_PV143 0x69 +#define BTTV_BOARD_VD009X1_VD011_MINIDIN 0x6a +#define BTTV_BOARD_VD009X1_VD011_COMBI 0x6b +#define BTTV_BOARD_VD009_MINIDIN 0x6c +#define BTTV_BOARD_VD009_COMBI 0x6d +#define BTTV_BOARD_IVC100 0x6e +#define BTTV_BOARD_IVC120 0x6f +#define BTTV_BOARD_PC_HDTV 0x70 +#define BTTV_BOARD_TWINHAN_DST 0x71 +#define BTTV_BOARD_WINFASTVC100 0x72 +#define BTTV_BOARD_TEV560 0x73 +#define BTTV_BOARD_SIMUS_GVC1100 0x74 +#define BTTV_BOARD_NGSTV_PLUS 0x75 +#define BTTV_BOARD_LMLBT4 0x76 +#define BTTV_BOARD_TEKRAM_M205 0x77 +#define BTTV_BOARD_CONTVFMI 0x78 +#define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 +#define BTTV_BOARD_SPIRIT_TV 0x7a +#define BTTV_BOARD_AVDVBT_771 0x7b +#define BTTV_BOARD_AVDVBT_761 0x7c +#define BTTV_BOARD_MATRIX_VISIONSQ 0x7d +#define BTTV_BOARD_MATRIX_VISIONSLC 0x7e +#define BTTV_BOARD_APAC_VIEWCOMP 0x7f +#define BTTV_BOARD_DVICO_DVBT_LITE 0x80 +#define BTTV_BOARD_VGEAR_MYVCD 0x81 +#define BTTV_BOARD_SUPER_TV 0x82 +#define BTTV_BOARD_TIBET_CS16 0x83 +#define BTTV_BOARD_KODICOM_4400R 0x84 +#define BTTV_BOARD_KODICOM_4400R_SL 0x85 +#define BTTV_BOARD_ADLINK_RTV24 0x86 +#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87 +#define BTTV_BOARD_ACORP_Y878F 0x88 +#define BTTV_BOARD_CONCEPTRONIC_CTVFMI2 0x89 +#define BTTV_BOARD_PV_BT878P_2E 0x8a +#define BTTV_BOARD_PV_M4900 0x8b +#define BTTV_BOARD_OSPREY440 0x8c +#define BTTV_BOARD_ASOUND_SKYEYE 0x8d +#define BTTV_BOARD_SABRENT_TVFM 0x8e +#define BTTV_BOARD_HAUPPAUGE_IMPACTVCB 0x8f +#define BTTV_BOARD_MACHTV_MAGICTV 0x90 +#define BTTV_BOARD_SSAI_SECURITY 0x91 +#define BTTV_BOARD_SSAI_ULTRASOUND 0x92 +#define BTTV_BOARD_VOODOOTV_200 0x93 +#define BTTV_BOARD_DVICO_FUSIONHDTV_2 0x94 +#define BTTV_BOARD_TYPHOON_TVTUNERPCI 0x95 +#define BTTV_BOARD_GEOVISION_GV600 0x96 +#define BTTV_BOARD_KOZUMI_KTV_01C 0x97 +#define BTTV_BOARD_ENLTV_FM_2 0x98 +#define BTTV_BOARD_VD012 0x99 +#define BTTV_BOARD_VD012_X1 0x9a +#define BTTV_BOARD_VD012_X2 0x9b +#define BTTV_BOARD_IVCE8784 0x9c +#define BTTV_BOARD_GEOVISION_GV800S 0x9d +#define BTTV_BOARD_GEOVISION_GV800S_SL 0x9e +#define BTTV_BOARD_PV183 0x9f +#define BTTV_BOARD_TVT_TD3116 0xa0 +#define BTTV_BOARD_APOSONIC_WDVR 0xa1 + +/* more card-specific defines */ +#define PT2254_L_CHANNEL 0x10 +#define PT2254_R_CHANNEL 0x08 +#define PT2254_DBS_IN_2 0x400 +#define PT2254_DBS_IN_10 0x20000 +#define WINVIEW_PT2254_CLK 0x40 +#define WINVIEW_PT2254_DATA 0x20 +#define WINVIEW_PT2254_STROBE 0x80 + +struct bttv_core { + /* device structs */ + struct v4l2_device v4l2_dev; + struct pci_dev *pci; + struct i2c_adapter i2c_adap; + struct list_head subs; /* struct bttv_sub_device */ + + /* device config */ + unsigned int nr; /* dev nr (for printk("bttv%d: ..."); */ + unsigned int type; /* card type (pointer into tvcards[]) */ +}; + +struct bttv; + +struct tvcard { + char *name; + void (*volume_gpio)(struct bttv *btv, __u16 volume); + void (*audio_mode_gpio)(struct bttv *btv, struct v4l2_tuner *tuner, int set); + void (*muxsel_hook)(struct bttv *btv, unsigned int input); + + /* MUX bits for each input, two bits per input starting with the LSB */ + u32 muxsel; /* Use MUXSEL() to set */ + + u32 gpiomask; + u32 gpiomux[4]; /* Tuner, Radio, external, internal */ + u32 gpiomute; /* GPIO mute setting */ + u32 gpiomask2; /* GPIO MUX mask */ + + unsigned int tuner_type; + u8 tuner_addr; + u8 video_inputs; /* Number of inputs */ + unsigned int svhs:4; /* Which input is s-video */ +#define NO_SVHS 15 + unsigned int pll:2; +#define PLL_NONE 0 +#define PLL_28 1 +#define PLL_35 2 + + /* i2c audio flags */ + unsigned int no_msp34xx:1; + unsigned int no_tda7432:1; + unsigned int msp34xx_alt:1; + /* Note: currently no card definition needs to mark the presence + of a RDS saa6588 chip. If this is ever needed, then add a new + 'has_saa6588' bit here. */ + + unsigned int no_video:1; /* video pci function is unused */ + unsigned int has_dvb:1; + unsigned int has_remote:1; + unsigned int has_radio:1; + unsigned int has_dig_in:1; /* Has digital input (always last input) */ + unsigned int no_gpioirq:1; +}; + +extern struct tvcard bttv_tvcards[]; + +/* + * This bit of cpp voodoo is used to create a macro with a variable number of + * arguments (1 to 16). It will pack each argument into a word two bits at a + * time. It can't be a function because it needs to be compile time constant to + * initialize structures. Since each argument must fit in two bits, it's ok + * that they are changed to octal. One should not use hex number, macros, or + * anything else with this macro. Just use plain integers from 0 to 3. + */ +#define _MUXSELf(a) 0##a << 30 +#define _MUXSELe(a, b...) 0##a << 28 | _MUXSELf(b) +#define _MUXSELd(a, b...) 0##a << 26 | _MUXSELe(b) +#define _MUXSELc(a, b...) 0##a << 24 | _MUXSELd(b) +#define _MUXSELb(a, b...) 0##a << 22 | _MUXSELc(b) +#define _MUXSELa(a, b...) 0##a << 20 | _MUXSELb(b) +#define _MUXSEL9(a, b...) 0##a << 18 | _MUXSELa(b) +#define _MUXSEL8(a, b...) 0##a << 16 | _MUXSEL9(b) +#define _MUXSEL7(a, b...) 0##a << 14 | _MUXSEL8(b) +#define _MUXSEL6(a, b...) 0##a << 12 | _MUXSEL7(b) +#define _MUXSEL5(a, b...) 0##a << 10 | _MUXSEL6(b) +#define _MUXSEL4(a, b...) 0##a << 8 | _MUXSEL5(b) +#define _MUXSEL3(a, b...) 0##a << 6 | _MUXSEL4(b) +#define _MUXSEL2(a, b...) 0##a << 4 | _MUXSEL3(b) +#define _MUXSEL1(a, b...) 0##a << 2 | _MUXSEL2(b) +#define MUXSEL(a, b...) (a | _MUXSEL1(b)) + +/* identification / initialization of the card */ +extern void bttv_idcard(struct bttv *btv); +extern void bttv_init_card1(struct bttv *btv); +extern void bttv_init_card2(struct bttv *btv); +extern void bttv_init_tuner(struct bttv *btv); + +/* card-specific funtions */ +extern void tea5757_set_freq(struct bttv *btv, unsigned short freq); +extern u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits); + +/* extra tweaks for some chipsets */ +extern void bttv_check_chipset(void); +extern int bttv_handle_chipset(struct bttv *btv); + +/* ---------------------------------------------------------- */ +/* exported by bttv-if.c */ + +/* this obsolete -- please use the sysfs-based + interface below for new code */ + +extern struct pci_dev* bttv_get_pcidev(unsigned int card); + +/* sets GPOE register (BT848_GPIO_OUT_EN) to new value: + data | (current_GPOE_value & ~mask) + returns negative value if error occurred +*/ +extern int bttv_gpio_enable(unsigned int card, + unsigned long mask, unsigned long data); + +/* fills data with GPDATA register contents + returns negative value if error occurred +*/ +extern int bttv_read_gpio(unsigned int card, unsigned long *data); + +/* sets GPDATA register to new value: + (data & mask) | (current_GPDATA_value & ~mask) + returns negative value if error occurred +*/ +extern int bttv_write_gpio(unsigned int card, + unsigned long mask, unsigned long data); + + + + +/* ---------------------------------------------------------- */ +/* sysfs/driver-moded based gpio access interface */ + +struct bttv_sub_device { + struct device dev; + struct bttv_core *core; + struct list_head list; +}; +#define to_bttv_sub_dev(x) container_of((x), struct bttv_sub_device, dev) + +struct bttv_sub_driver { + struct device_driver drv; + char wanted[20]; + int (*probe)(struct bttv_sub_device *sub); + void (*remove)(struct bttv_sub_device *sub); +}; +#define to_bttv_sub_drv(x) container_of((x), struct bttv_sub_driver, drv) + +int bttv_sub_register(struct bttv_sub_driver *drv, char *wanted); +int bttv_sub_unregister(struct bttv_sub_driver *drv); + +/* gpio access functions */ +void bttv_gpio_inout(struct bttv_core *core, u32 mask, u32 outbits); +u32 bttv_gpio_read(struct bttv_core *core); +void bttv_gpio_write(struct bttv_core *core, u32 value); +void bttv_gpio_bits(struct bttv_core *core, u32 mask, u32 bits); + +#define gpio_inout(mask,bits) bttv_gpio_inout(&btv->c, mask, bits) +#define gpio_read() bttv_gpio_read(&btv->c) +#define gpio_write(value) bttv_gpio_write(&btv->c, value) +#define gpio_bits(mask,bits) bttv_gpio_bits(&btv->c, mask, bits) + + +/* ---------------------------------------------------------- */ +/* i2c */ + +#define bttv_call_all(btv, o, f, args...) \ + v4l2_device_call_all(&btv->c.v4l2_dev, 0, o, f, ##args) + +#define bttv_call_all_err(btv, o, f, args...) \ + v4l2_device_call_until_err(&btv->c.v4l2_dev, 0, o, f, ##args) + +extern int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for); +extern int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1, + unsigned char b2, int both); +extern void bttv_readee(struct bttv *btv, unsigned char *eedata, int addr); + +extern int bttv_input_init(struct bttv *dev); +extern void bttv_input_fini(struct bttv *dev); +extern void bttv_input_irq(struct bttv *dev); + +#endif /* _BTTV_H_ */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/bttvp.h b/drivers/media/pci/bt8xx/bttvp.h new file mode 100644 index 00000000..9c1cc2c5 --- /dev/null +++ b/drivers/media/pci/bt8xx/bttvp.h @@ -0,0 +1,538 @@ +/* + + bttv - Bt848 frame grabber driver + + bttv's *private* header file -- nobody other than bttv itself + should ever include this file. + + (c) 2000-2002 Gerd Knorr + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _BTTVP_H_ +#define _BTTVP_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bt848.h" +#include "bttv.h" +#include "btcx-risc.h" + +#ifdef __KERNEL__ + +#define FORMAT_FLAGS_DITHER 0x01 +#define FORMAT_FLAGS_PACKED 0x02 +#define FORMAT_FLAGS_PLANAR 0x04 +#define FORMAT_FLAGS_RAW 0x08 +#define FORMAT_FLAGS_CrCb 0x10 + +#define RISC_SLOT_O_VBI 4 +#define RISC_SLOT_O_FIELD 6 +#define RISC_SLOT_E_VBI 10 +#define RISC_SLOT_E_FIELD 12 +#define RISC_SLOT_LOOP 14 + +#define RESOURCE_OVERLAY 1 +#define RESOURCE_VIDEO_STREAM 2 +#define RESOURCE_VBI 4 +#define RESOURCE_VIDEO_READ 8 + +#define RAW_LINES 640 +#define RAW_BPL 1024 + +#define UNSET (-1U) + +/* Min. value in VDELAY register. */ +#define MIN_VDELAY 2 +/* Even to get Cb first, odd for Cr. */ +#define MAX_HDELAY (0x3FF & -2) +/* Limits scaled width, which must be a multiple of 4. */ +#define MAX_HACTIVE (0x3FF & -4) + +#define BTTV_NORMS (\ + V4L2_STD_PAL | V4L2_STD_PAL_N | \ + V4L2_STD_PAL_Nc | V4L2_STD_SECAM | \ + V4L2_STD_NTSC | V4L2_STD_PAL_M | \ + V4L2_STD_PAL_60) +/* ---------------------------------------------------------- */ + +struct bttv_tvnorm { + int v4l2_id; + char *name; + u32 Fsc; + u16 swidth, sheight; /* scaled standard width, height */ + u16 totalwidth; + u8 adelay, bdelay, iform; + u32 scaledtwidth; + u16 hdelayx1, hactivex1; + u16 vdelay; + u8 vbipack; + u16 vtotal; + int sram; + /* ITU-R frame line number of the first VBI line we can + capture, of the first and second field. The last possible line + is determined by cropcap.bounds. */ + u16 vbistart[2]; + /* Horizontally this counts fCLKx1 samples following the leading + edge of the horizontal sync pulse, vertically ITU-R frame line + numbers of the first field times two (2, 4, 6, ... 524 or 624). */ + struct v4l2_cropcap cropcap; +}; +extern const struct bttv_tvnorm bttv_tvnorms[]; + +struct bttv_format { + char *name; + int fourcc; /* video4linux 2 */ + int btformat; /* BT848_COLOR_FMT_* */ + int btswap; /* BT848_COLOR_CTL_* */ + int depth; /* bit/pixel */ + int flags; + int hshift,vshift; /* for planar modes */ +}; + +struct bttv_ir { + struct rc_dev *dev; + struct timer_list timer; + + char name[32]; + char phys[32]; + + /* Usual gpio signalling */ + u32 mask_keycode; + u32 mask_keydown; + u32 mask_keyup; + u32 polling; + u32 last_gpio; + int shift_by; + int start; // What should RC5_START() be + int addr; // What RC5_ADDR() should be. + int rc5_remote_gap; + + /* RC5 gpio */ + bool rc5_gpio; /* Is RC5 legacy GPIO enabled? */ + u32 last_bit; /* last raw bit seen */ + u32 code; /* raw code under construction */ + struct timeval base_time; /* time of last seen code */ + bool active; /* building raw code */ +}; + + +/* ---------------------------------------------------------- */ + +struct bttv_geometry { + u8 vtc,crop,comb; + u16 width,hscale,hdelay; + u16 sheight,vscale,vdelay,vtotal; +}; + +struct bttv_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + /* bttv specific */ + const struct bttv_format *fmt; + unsigned int tvnorm; + int btformat; + int btswap; + struct bttv_geometry geo; + struct btcx_riscmem top; + struct btcx_riscmem bottom; + struct v4l2_rect crop; + unsigned int vbi_skip[2]; + unsigned int vbi_count[2]; +}; + +struct bttv_buffer_set { + struct bttv_buffer *top; /* top field buffer */ + struct bttv_buffer *bottom; /* bottom field buffer */ + unsigned int top_irq; + unsigned int frame_irq; +}; + +struct bttv_overlay { + unsigned int tvnorm; + struct v4l2_rect w; + enum v4l2_field field; + struct v4l2_clip *clips; + int nclips; + int setup_ok; +}; + +struct bttv_vbi_fmt { + struct v4l2_vbi_format fmt; + + /* fmt.start[] and count[] refer to this video standard. */ + const struct bttv_tvnorm *tvnorm; + + /* Earliest possible start of video capturing with this + v4l2_vbi_format, in struct bttv_crop.rect units. */ + __s32 end; +}; + +/* bttv-vbi.c */ +void bttv_vbi_fmt_reset(struct bttv_vbi_fmt *f, unsigned int norm); + +struct bttv_crop { + /* A cropping rectangle in struct bttv_tvnorm.cropcap units. */ + struct v4l2_rect rect; + + /* Scaled image size limits with this crop rect. Divide + max_height, but not min_height, by two when capturing + single fields. See also bttv_crop_reset() and + bttv_crop_adjust() in bttv-driver.c. */ + __s32 min_scaled_width; + __s32 min_scaled_height; + __s32 max_scaled_width; + __s32 max_scaled_height; +}; + +struct bttv_fh { + /* This must be the first field in this struct */ + struct v4l2_fh fh; + + struct bttv *btv; + int resources; + enum v4l2_buf_type type; + + /* video capture */ + struct videobuf_queue cap; + const struct bttv_format *fmt; + int width; + int height; + + /* video overlay */ + const struct bttv_format *ovfmt; + struct bttv_overlay ov; + + /* Application called VIDIOC_S_CROP. */ + int do_crop; + + /* vbi capture */ + struct videobuf_queue vbi; + /* Current VBI capture window as seen through this fh (cannot + be global for compatibility with earlier drivers). Protected + by struct bttv.lock and struct bttv_fh.vbi.lock. */ + struct bttv_vbi_fmt vbi_fmt; +}; + +/* ---------------------------------------------------------- */ +/* bttv-risc.c */ + +/* risc code generators - capture */ +int bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int offset, unsigned int bpl, + unsigned int pitch, unsigned int skip_lines, + unsigned int store_lines); + +/* control dma register + risc main loop */ +void bttv_set_dma(struct bttv *btv, int override); +int bttv_risc_init_main(struct bttv *btv); +int bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc, + int irqflags); + +/* capture buffer handling */ +int bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf); +int bttv_buffer_activate_video(struct bttv *btv, + struct bttv_buffer_set *set); +int bttv_buffer_activate_vbi(struct bttv *btv, + struct bttv_buffer *vbi); +void bttv_dma_free(struct videobuf_queue *q, struct bttv *btv, + struct bttv_buffer *buf); + +/* overlay handling */ +int bttv_overlay_risc(struct bttv *btv, struct bttv_overlay *ov, + const struct bttv_format *fmt, + struct bttv_buffer *buf); + + +/* ---------------------------------------------------------- */ +/* bttv-vbi.c */ + +int bttv_try_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f); +int bttv_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f); +int bttv_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f); + +extern struct videobuf_queue_ops bttv_vbi_qops; + +/* ---------------------------------------------------------- */ +/* bttv-gpio.c */ + +extern struct bus_type bttv_sub_bus_type; +int bttv_sub_add_device(struct bttv_core *core, char *name); +int bttv_sub_del_devices(struct bttv_core *core); + +/* ---------------------------------------------------------- */ +/* bttv-cards.c */ + +extern int no_overlay; + +/* ---------------------------------------------------------- */ +/* bttv-input.c */ + +extern void init_bttv_i2c_ir(struct bttv *btv); + +/* ---------------------------------------------------------- */ +/* bttv-i2c.c */ +extern int init_bttv_i2c(struct bttv *btv); +extern int fini_bttv_i2c(struct bttv *btv); + +/* ---------------------------------------------------------- */ +/* bttv-driver.c */ + +/* insmod options */ +extern unsigned int bttv_verbose; +extern unsigned int bttv_debug; +extern unsigned int bttv_gpio; +extern void bttv_gpio_tracking(struct bttv *btv, char *comment); + +#define dprintk(fmt, ...) \ +do { \ + if (bttv_debug >= 1) \ + pr_debug(fmt, ##__VA_ARGS__); \ +} while (0) +#define dprintk_cont(fmt, ...) \ +do { \ + if (bttv_debug >= 1) \ + pr_cont(fmt, ##__VA_ARGS__); \ +} while (0) +#define d2printk(fmt, ...) \ +do { \ + if (bttv_debug >= 2) \ + printk(fmt, ##__VA_ARGS__); \ +} while (0) + +#define BTTV_MAX_FBUF 0x208000 +#define BTTV_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ +#define BTTV_FREE_IDLE msecs_to_jiffies(1000) /* one second */ + + +struct bttv_pll_info { + unsigned int pll_ifreq; /* PLL input frequency */ + unsigned int pll_ofreq; /* PLL output frequency */ + unsigned int pll_crystal; /* Crystal used for input */ + unsigned int pll_current; /* Currently programmed ofreq */ +}; + +/* for gpio-connected remote control */ +struct bttv_input { + struct input_dev *dev; + char name[32]; + char phys[32]; + u32 mask_keycode; + u32 mask_keydown; +}; + +struct bttv_suspend_state { + u32 gpio_enable; + u32 gpio_data; + int disabled; + int loop_irq; + struct bttv_buffer_set video; + struct bttv_buffer *vbi; +}; + +struct bttv { + struct bttv_core c; + + /* pci device config */ + unsigned short id; + unsigned char revision; + unsigned char __iomem *bt848_mmio; /* pointer to mmio */ + + /* card configuration info */ + unsigned int cardid; /* pci subsystem id (bt878 based ones) */ + unsigned int tuner_type; /* tuner chip type */ + unsigned int tda9887_conf; + unsigned int svhs, dig; + unsigned int has_saa6588:1; + struct bttv_pll_info pll; + int triton1; + int gpioirq; + + int use_i2c_hw; + + /* old gpio interface */ + int shutdown; + + void (*volume_gpio)(struct bttv *btv, __u16 volume); + void (*audio_mode_gpio)(struct bttv *btv, struct v4l2_tuner *tuner, int set); + + /* new gpio interface */ + spinlock_t gpio_lock; + + /* i2c layer */ + struct i2c_algo_bit_data i2c_algo; + struct i2c_client i2c_client; + int i2c_state, i2c_rc; + int i2c_done; + wait_queue_head_t i2c_queue; + struct v4l2_subdev *sd_msp34xx; + struct v4l2_subdev *sd_tvaudio; + struct v4l2_subdev *sd_tda7432; + + /* video4linux (1) */ + struct video_device *video_dev; + struct video_device *radio_dev; + struct video_device *vbi_dev; + + /* controls */ + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_ctrl_handler radio_ctrl_handler; + + /* infrared remote */ + int has_remote; + struct bttv_ir *remote; + + /* I2C remote data */ + struct IR_i2c_init_data init_data; + + /* locking */ + spinlock_t s_lock; + struct mutex lock; + int resources; + + /* video state */ + unsigned int input; + unsigned int audio_input; + unsigned int mute; + unsigned long tv_freq; + unsigned int tvnorm; + v4l2_std_id std; + int hue, contrast, bright, saturation; + struct v4l2_framebuffer fbuf; + unsigned int field_count; + + /* various options */ + int opt_combfilter; + int opt_automute; + int opt_vcr_hack; + int opt_uv_ratio; + + /* radio data/state */ + int has_radio; + int has_radio_tuner; + int radio_user; + int radio_uses_msp_demodulator; + unsigned long radio_freq; + + /* miro/pinnacle + Aimslab VHX + philips matchbox (tea5757 radio tuner) support */ + int has_matchbox; + int mbox_we; + int mbox_data; + int mbox_clk; + int mbox_most; + int mbox_mask; + + /* ISA stuff (Terratec Active Radio Upgrade) */ + int mbox_ior; + int mbox_iow; + int mbox_csel; + + /* risc memory management data + - must acquire s_lock before changing these + - only the irq handler is supported to touch top + bottom + vcurr */ + struct btcx_riscmem main; + struct bttv_buffer *screen; /* overlay */ + struct list_head capture; /* video capture queue */ + struct list_head vcapture; /* vbi capture queue */ + struct bttv_buffer_set curr; /* active buffers */ + struct bttv_buffer *cvbi; /* active vbi buffer */ + int loop_irq; + int new_input; + + unsigned long cap_ctl; + unsigned long dma_on; + struct timer_list timeout; + struct bttv_suspend_state state; + + /* stats */ + unsigned int errors; + unsigned int framedrop; + unsigned int irq_total; + unsigned int irq_me; + + unsigned int users; + struct bttv_fh init; + + /* used to make dvb-bt8xx autoloadable */ + struct work_struct request_module_wk; + + /* Default (0) and current (1) video capturing and overlay + cropping parameters in bttv_tvnorm.cropcap units. Protected + by bttv.lock. */ + struct bttv_crop crop[2]; + + /* Earliest possible start of video capturing in + bttv_tvnorm.cropcap line units. Set by check_alloc_btres() + and free_btres(). Protected by bttv.lock. */ + __s32 vbi_end; + + /* Latest possible end of VBI capturing (= crop[x].rect.top when + VIDEO_RESOURCES are locked). Set by check_alloc_btres() + and free_btres(). Protected by bttv.lock. */ + __s32 crop_start; +}; + +static inline struct bttv *to_bttv(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct bttv, c.v4l2_dev); +} + +/* our devices */ +#define BTTV_MAX 32 +extern unsigned int bttv_num; +extern struct bttv *bttvs[BTTV_MAX]; + +static inline unsigned int bttv_muxsel(const struct bttv *btv, + unsigned int input) +{ + return (bttv_tvcards[btv->c.type].muxsel >> (input * 2)) & 3; +} + +#endif + +#define btwrite(dat,adr) writel((dat), btv->bt848_mmio+(adr)) +#define btread(adr) readl(btv->bt848_mmio+(adr)) + +#define btand(dat,adr) btwrite((dat) & btread(adr), adr) +#define btor(dat,adr) btwrite((dat) | btread(adr), adr) +#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) + +#endif /* _BTTVP_H_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/bt8xx/dst.c b/drivers/media/pci/bt8xx/dst.c new file mode 100644 index 00000000..430b3eb1 --- /dev/null +++ b/drivers/media/pci/bt8xx/dst.c @@ -0,0 +1,1873 @@ +/* + Frontend/Card driver for TwinHan DST Frontend + Copyright (C) 2003 Jamie Honan + Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "dst_priv.h" +#include "dst_common.h" + +static unsigned int verbose = 1; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +static unsigned int dst_addons; +module_param(dst_addons, int, 0644); +MODULE_PARM_DESC(dst_addons, "CA daughterboard, default is 0 (No addons)"); + +static unsigned int dst_algo; +module_param(dst_algo, int, 0644); +MODULE_PARM_DESC(dst_algo, "tuning algo: default is 0=(SW), 1=(HW)"); + +#define HAS_LOCK 1 +#define ATTEMPT_TUNE 2 +#define HAS_POWER 4 + +#define DST_ERROR 0 +#define DST_NOTICE 1 +#define DST_INFO 2 +#define DST_DEBUG 3 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((x > DST_ERROR) && (x > y)) \ + printk(KERN_ERR "dst(%d) %s: " format "\n", \ + state->bt->nr, __func__ , ##arg); \ + else if ((x > DST_NOTICE) && (x > y)) \ + printk(KERN_NOTICE "dst(%d) %s: " format "\n", \ + state->bt->nr, __func__ , ##arg); \ + else if ((x > DST_INFO) && (x > y)) \ + printk(KERN_INFO "dst(%d) %s: " format "\n", \ + state->bt->nr, __func__ , ##arg); \ + else if ((x > DST_DEBUG) && (x > y)) \ + printk(KERN_DEBUG "dst(%d) %s: " format "\n", \ + state->bt->nr, __func__ , ##arg); \ + } else { \ + if (x > y) \ + printk(format, ##arg); \ + } \ +} while(0) + +static int dst_command(struct dst_state *state, u8 *data, u8 len); + +static void dst_packsize(struct dst_state *state, int psize) +{ + union dst_gpio_packet bits; + + bits.psize = psize; + bt878_device_control(state->bt, DST_IG_TS, &bits); +} + +static int dst_gpio_outb(struct dst_state *state, u32 mask, u32 enbb, + u32 outhigh, int delay) +{ + union dst_gpio_packet enb; + union dst_gpio_packet bits; + int err; + + enb.enb.mask = mask; + enb.enb.enable = enbb; + + dprintk(verbose, DST_INFO, 1, "mask=[%04x], enbb=[%04x], outhigh=[%04x]", mask, enbb, outhigh); + if ((err = bt878_device_control(state->bt, DST_IG_ENABLE, &enb)) < 0) { + dprintk(verbose, DST_INFO, 1, "dst_gpio_enb error (err == %i, mask == %02x, enb == %02x)", err, mask, enbb); + return -EREMOTEIO; + } + udelay(1000); + /* because complete disabling means no output, no need to do output packet */ + if (enbb == 0) + return 0; + if (delay) + msleep(10); + bits.outp.mask = enbb; + bits.outp.highvals = outhigh; + if ((err = bt878_device_control(state->bt, DST_IG_WRITE, &bits)) < 0) { + dprintk(verbose, DST_INFO, 1, "dst_gpio_outb error (err == %i, enbb == %02x, outhigh == %02x)", err, enbb, outhigh); + return -EREMOTEIO; + } + + return 0; +} + +static int dst_gpio_inb(struct dst_state *state, u8 *result) +{ + union dst_gpio_packet rd_packet; + int err; + + *result = 0; + if ((err = bt878_device_control(state->bt, DST_IG_READ, &rd_packet)) < 0) { + dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb error (err == %i)", err); + return -EREMOTEIO; + } + *result = (u8) rd_packet.rd.value; + + return 0; +} + +int rdc_reset_state(struct dst_state *state) +{ + dprintk(verbose, DST_INFO, 1, "Resetting state machine"); + if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, 0, NO_DELAY) < 0) { + dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); + return -1; + } + msleep(10); + if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, RDC_8820_INT, NO_DELAY) < 0) { + dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); + msleep(10); + return -1; + } + + return 0; +} +EXPORT_SYMBOL(rdc_reset_state); + +static int rdc_8820_reset(struct dst_state *state) +{ + dprintk(verbose, DST_DEBUG, 1, "Resetting DST"); + if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, 0, NO_DELAY) < 0) { + dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); + return -1; + } + udelay(1000); + if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, RDC_8820_RESET, DELAY) < 0) { + dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); + return -1; + } + + return 0; +} + +static int dst_pio_enable(struct dst_state *state) +{ + if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_ENABLE, 0, NO_DELAY) < 0) { + dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); + return -1; + } + udelay(1000); + + return 0; +} + +int dst_pio_disable(struct dst_state *state) +{ + if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_DISABLE, RDC_8820_PIO_0_DISABLE, NO_DELAY) < 0) { + dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); + return -1; + } + if (state->type_flags & DST_TYPE_HAS_FW_1) + udelay(1000); + + return 0; +} +EXPORT_SYMBOL(dst_pio_disable); + +int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode) +{ + u8 reply; + int i; + + for (i = 0; i < 200; i++) { + if (dst_gpio_inb(state, &reply) < 0) { + dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb ERROR !"); + return -1; + } + if ((reply & RDC_8820_PIO_0_ENABLE) == 0) { + dprintk(verbose, DST_INFO, 1, "dst wait ready after %d", i); + return 1; + } + msleep(10); + } + dprintk(verbose, DST_NOTICE, 1, "dst wait NOT ready after %d", i); + + return 0; +} +EXPORT_SYMBOL(dst_wait_dst_ready); + +int dst_error_recovery(struct dst_state *state) +{ + dprintk(verbose, DST_NOTICE, 1, "Trying to return from previous errors."); + dst_pio_disable(state); + msleep(10); + dst_pio_enable(state); + msleep(10); + + return 0; +} +EXPORT_SYMBOL(dst_error_recovery); + +int dst_error_bailout(struct dst_state *state) +{ + dprintk(verbose, DST_INFO, 1, "Trying to bailout from previous error."); + rdc_8820_reset(state); + dst_pio_disable(state); + msleep(10); + + return 0; +} +EXPORT_SYMBOL(dst_error_bailout); + +int dst_comm_init(struct dst_state *state) +{ + dprintk(verbose, DST_INFO, 1, "Initializing DST."); + if ((dst_pio_enable(state)) < 0) { + dprintk(verbose, DST_ERROR, 1, "PIO Enable Failed"); + return -1; + } + if ((rdc_reset_state(state)) < 0) { + dprintk(verbose, DST_ERROR, 1, "RDC 8820 State RESET Failed."); + return -1; + } + if (state->type_flags & DST_TYPE_HAS_FW_1) + msleep(100); + else + msleep(5); + + return 0; +} +EXPORT_SYMBOL(dst_comm_init); + +int write_dst(struct dst_state *state, u8 *data, u8 len) +{ + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = data, + .len = len + }; + + int err; + u8 cnt, i; + + dprintk(verbose, DST_NOTICE, 0, "writing [ "); + for (i = 0; i < len; i++) + dprintk(verbose, DST_NOTICE, 0, "%02x ", data[i]); + dprintk(verbose, DST_NOTICE, 0, "]\n"); + + for (cnt = 0; cnt < 2; cnt++) { + if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) { + dprintk(verbose, DST_INFO, 1, "_write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len, data[0]); + dst_error_recovery(state); + continue; + } else + break; + } + if (cnt >= 2) { + dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET"); + dst_error_bailout(state); + + return -1; + } + + return 0; +} +EXPORT_SYMBOL(write_dst); + +int read_dst(struct dst_state *state, u8 *ret, u8 len) +{ + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = ret, + .len = len + }; + + int err; + int cnt; + + for (cnt = 0; cnt < 2; cnt++) { + if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) { + dprintk(verbose, DST_INFO, 1, "read_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len, ret[0]); + dst_error_recovery(state); + continue; + } else + break; + } + if (cnt >= 2) { + dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET"); + dst_error_bailout(state); + + return -1; + } + dprintk(verbose, DST_DEBUG, 1, "reply is 0x%x", ret[0]); + for (err = 1; err < len; err++) + dprintk(verbose, DST_DEBUG, 0, " 0x%x", ret[err]); + if (err > 1) + dprintk(verbose, DST_DEBUG, 0, "\n"); + + return 0; +} +EXPORT_SYMBOL(read_dst); + +static int dst_set_polarization(struct dst_state *state) +{ + switch (state->voltage) { + case SEC_VOLTAGE_13: /* Vertical */ + dprintk(verbose, DST_INFO, 1, "Polarization=[Vertical]"); + state->tx_tuna[8] &= ~0x40; + break; + case SEC_VOLTAGE_18: /* Horizontal */ + dprintk(verbose, DST_INFO, 1, "Polarization=[Horizontal]"); + state->tx_tuna[8] |= 0x40; + break; + case SEC_VOLTAGE_OFF: + break; + } + + return 0; +} + +static int dst_set_freq(struct dst_state *state, u32 freq) +{ + state->frequency = freq; + dprintk(verbose, DST_INFO, 1, "set Frequency %u", freq); + + if (state->dst_type == DST_TYPE_IS_SAT) { + freq = freq / 1000; + if (freq < 950 || freq > 2150) + return -EINVAL; + state->tx_tuna[2] = (freq >> 8); + state->tx_tuna[3] = (u8) freq; + state->tx_tuna[4] = 0x01; + state->tx_tuna[8] &= ~0x04; + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) { + if (freq < 1531) + state->tx_tuna[8] |= 0x04; + } + } else if (state->dst_type == DST_TYPE_IS_TERR) { + freq = freq / 1000; + if (freq < 137000 || freq > 858000) + return -EINVAL; + state->tx_tuna[2] = (freq >> 16) & 0xff; + state->tx_tuna[3] = (freq >> 8) & 0xff; + state->tx_tuna[4] = (u8) freq; + } else if (state->dst_type == DST_TYPE_IS_CABLE) { + freq = freq / 1000; + state->tx_tuna[2] = (freq >> 16) & 0xff; + state->tx_tuna[3] = (freq >> 8) & 0xff; + state->tx_tuna[4] = (u8) freq; + } else if (state->dst_type == DST_TYPE_IS_ATSC) { + freq = freq / 1000; + if (freq < 51000 || freq > 858000) + return -EINVAL; + state->tx_tuna[2] = (freq >> 16) & 0xff; + state->tx_tuna[3] = (freq >> 8) & 0xff; + state->tx_tuna[4] = (u8) freq; + state->tx_tuna[5] = 0x00; /* ATSC */ + state->tx_tuna[6] = 0x00; + if (state->dst_hw_cap & DST_TYPE_HAS_ANALOG) + state->tx_tuna[7] = 0x00; /* Digital */ + } else + return -EINVAL; + + return 0; +} + +static int dst_set_bandwidth(struct dst_state *state, u32 bandwidth) +{ + state->bandwidth = bandwidth; + + if (state->dst_type != DST_TYPE_IS_TERR) + return -EOPNOTSUPP; + + switch (bandwidth) { + case 6000000: + if (state->dst_hw_cap & DST_TYPE_HAS_CA) + state->tx_tuna[7] = 0x06; + else { + state->tx_tuna[6] = 0x06; + state->tx_tuna[7] = 0x00; + } + break; + case 7000000: + if (state->dst_hw_cap & DST_TYPE_HAS_CA) + state->tx_tuna[7] = 0x07; + else { + state->tx_tuna[6] = 0x07; + state->tx_tuna[7] = 0x00; + } + break; + case 8000000: + if (state->dst_hw_cap & DST_TYPE_HAS_CA) + state->tx_tuna[7] = 0x08; + else { + state->tx_tuna[6] = 0x08; + state->tx_tuna[7] = 0x00; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static int dst_set_inversion(struct dst_state *state, fe_spectral_inversion_t inversion) +{ + state->inversion = inversion; + switch (inversion) { + case INVERSION_OFF: /* Inversion = Normal */ + state->tx_tuna[8] &= ~0x80; + break; + case INVERSION_ON: + state->tx_tuna[8] |= 0x80; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int dst_set_fec(struct dst_state *state, fe_code_rate_t fec) +{ + state->fec = fec; + return 0; +} + +static fe_code_rate_t dst_get_fec(struct dst_state *state) +{ + return state->fec; +} + +static int dst_set_symbolrate(struct dst_state *state, u32 srate) +{ + u32 symcalc; + u64 sval; + + state->symbol_rate = srate; + if (state->dst_type == DST_TYPE_IS_TERR) { + return -EOPNOTSUPP; + } + dprintk(verbose, DST_INFO, 1, "set symrate %u", srate); + srate /= 1000; + if (state->dst_type == DST_TYPE_IS_SAT) { + if (state->type_flags & DST_TYPE_HAS_SYMDIV) { + sval = srate; + sval <<= 20; + do_div(sval, 88000); + symcalc = (u32) sval; + dprintk(verbose, DST_INFO, 1, "set symcalc %u", symcalc); + state->tx_tuna[5] = (u8) (symcalc >> 12); + state->tx_tuna[6] = (u8) (symcalc >> 4); + state->tx_tuna[7] = (u8) (symcalc << 4); + } else { + state->tx_tuna[5] = (u8) (srate >> 16) & 0x7f; + state->tx_tuna[6] = (u8) (srate >> 8); + state->tx_tuna[7] = (u8) srate; + } + state->tx_tuna[8] &= ~0x20; + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) { + if (srate > 8000) + state->tx_tuna[8] |= 0x20; + } + } else if (state->dst_type == DST_TYPE_IS_CABLE) { + dprintk(verbose, DST_DEBUG, 1, "%s", state->fw_name); + if (!strncmp(state->fw_name, "DCTNEW", 6)) { + state->tx_tuna[5] = (u8) (srate >> 8); + state->tx_tuna[6] = (u8) srate; + state->tx_tuna[7] = 0x00; + } else if (!strncmp(state->fw_name, "DCT-CI", 6)) { + state->tx_tuna[5] = 0x00; + state->tx_tuna[6] = (u8) (srate >> 8); + state->tx_tuna[7] = (u8) srate; + } + } + return 0; +} + +static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation) +{ + if (state->dst_type != DST_TYPE_IS_CABLE) + return -EOPNOTSUPP; + + state->modulation = modulation; + switch (modulation) { + case QAM_16: + state->tx_tuna[8] = 0x10; + break; + case QAM_32: + state->tx_tuna[8] = 0x20; + break; + case QAM_64: + state->tx_tuna[8] = 0x40; + break; + case QAM_128: + state->tx_tuna[8] = 0x80; + break; + case QAM_256: + if (!strncmp(state->fw_name, "DCTNEW", 6)) + state->tx_tuna[8] = 0xff; + else if (!strncmp(state->fw_name, "DCT-CI", 6)) + state->tx_tuna[8] = 0x00; + break; + case QPSK: + case QAM_AUTO: + case VSB_8: + case VSB_16: + default: + return -EINVAL; + + } + + return 0; +} + +static fe_modulation_t dst_get_modulation(struct dst_state *state) +{ + return state->modulation; +} + + +u8 dst_check_sum(u8 *buf, u32 len) +{ + u32 i; + u8 val = 0; + if (!len) + return 0; + for (i = 0; i < len; i++) { + val += buf[i]; + } + return ((~val) + 1); +} +EXPORT_SYMBOL(dst_check_sum); + +static void dst_type_flags_print(struct dst_state *state) +{ + u32 type_flags = state->type_flags; + + dprintk(verbose, DST_ERROR, 0, "DST type flags :"); + if (type_flags & DST_TYPE_HAS_TS188) + dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner", DST_TYPE_HAS_TS188); + if (type_flags & DST_TYPE_HAS_NEWTUNE_2) + dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner 2", DST_TYPE_HAS_NEWTUNE_2); + if (type_flags & DST_TYPE_HAS_TS204) + dprintk(verbose, DST_ERROR, 0, " 0x%x ts204", DST_TYPE_HAS_TS204); + if (type_flags & DST_TYPE_HAS_VLF) + dprintk(verbose, DST_ERROR, 0, " 0x%x VLF", DST_TYPE_HAS_VLF); + if (type_flags & DST_TYPE_HAS_SYMDIV) + dprintk(verbose, DST_ERROR, 0, " 0x%x symdiv", DST_TYPE_HAS_SYMDIV); + if (type_flags & DST_TYPE_HAS_FW_1) + dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 1", DST_TYPE_HAS_FW_1); + if (type_flags & DST_TYPE_HAS_FW_2) + dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 2", DST_TYPE_HAS_FW_2); + if (type_flags & DST_TYPE_HAS_FW_3) + dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 3", DST_TYPE_HAS_FW_3); + dprintk(verbose, DST_ERROR, 0, "\n"); +} + + +static int dst_type_print(struct dst_state *state, u8 type) +{ + char *otype; + switch (type) { + case DST_TYPE_IS_SAT: + otype = "satellite"; + break; + + case DST_TYPE_IS_TERR: + otype = "terrestrial"; + break; + + case DST_TYPE_IS_CABLE: + otype = "cable"; + break; + + case DST_TYPE_IS_ATSC: + otype = "atsc"; + break; + + default: + dprintk(verbose, DST_INFO, 1, "invalid dst type %d", type); + return -EINVAL; + } + dprintk(verbose, DST_INFO, 1, "DST type: %s", otype); + + return 0; +} + +static struct tuner_types tuner_list[] = { + { + .tuner_type = TUNER_TYPE_L64724, + .tuner_name = "L 64724", + .board_name = "UNKNOWN", + .fw_name = "UNKNOWN" + }, + + { + .tuner_type = TUNER_TYPE_STV0299, + .tuner_name = "STV 0299", + .board_name = "VP1020", + .fw_name = "DST-MOT" + }, + + { + .tuner_type = TUNER_TYPE_STV0299, + .tuner_name = "STV 0299", + .board_name = "VP1020", + .fw_name = "DST-03T" + }, + + { + .tuner_type = TUNER_TYPE_MB86A15, + .tuner_name = "MB 86A15", + .board_name = "VP1022", + .fw_name = "DST-03T" + }, + + { + .tuner_type = TUNER_TYPE_MB86A15, + .tuner_name = "MB 86A15", + .board_name = "VP1025", + .fw_name = "DST-03T" + }, + + { + .tuner_type = TUNER_TYPE_STV0299, + .tuner_name = "STV 0299", + .board_name = "VP1030", + .fw_name = "DST-CI" + }, + + { + .tuner_type = TUNER_TYPE_STV0299, + .tuner_name = "STV 0299", + .board_name = "VP1030", + .fw_name = "DSTMCI" + }, + + { + .tuner_type = TUNER_TYPE_UNKNOWN, + .tuner_name = "UNKNOWN", + .board_name = "VP2021", + .fw_name = "DCTNEW" + }, + + { + .tuner_type = TUNER_TYPE_UNKNOWN, + .tuner_name = "UNKNOWN", + .board_name = "VP2030", + .fw_name = "DCT-CI" + }, + + { + .tuner_type = TUNER_TYPE_UNKNOWN, + .tuner_name = "UNKNOWN", + .board_name = "VP2031", + .fw_name = "DCT-CI" + }, + + { + .tuner_type = TUNER_TYPE_UNKNOWN, + .tuner_name = "UNKNOWN", + .board_name = "VP2040", + .fw_name = "DCT-CI" + }, + + { + .tuner_type = TUNER_TYPE_UNKNOWN, + .tuner_name = "UNKNOWN", + .board_name = "VP3020", + .fw_name = "DTTFTA" + }, + + { + .tuner_type = TUNER_TYPE_UNKNOWN, + .tuner_name = "UNKNOWN", + .board_name = "VP3021", + .fw_name = "DTTFTA" + }, + + { + .tuner_type = TUNER_TYPE_TDA10046, + .tuner_name = "TDA10046", + .board_name = "VP3040", + .fw_name = "DTT-CI" + }, + + { + .tuner_type = TUNER_TYPE_UNKNOWN, + .tuner_name = "UNKNOWN", + .board_name = "VP3051", + .fw_name = "DTTNXT" + }, + + { + .tuner_type = TUNER_TYPE_NXT200x, + .tuner_name = "NXT200x", + .board_name = "VP3220", + .fw_name = "ATSCDI" + }, + + { + .tuner_type = TUNER_TYPE_NXT200x, + .tuner_name = "NXT200x", + .board_name = "VP3250", + .fw_name = "ATSCAD" + }, +}; + +/* + Known cards list + Satellite + ------------------- + 200103A + VP-1020 DST-MOT LG(old), TS=188 + + VP-1020 DST-03T LG(new), TS=204 + VP-1022 DST-03T LG(new), TS=204 + VP-1025 DST-03T LG(new), TS=204 + + VP-1030 DSTMCI, LG(new), TS=188 + VP-1032 DSTMCI, LG(new), TS=188 + + Cable + ------------------- + VP-2030 DCT-CI, Samsung, TS=204 + VP-2021 DCT-CI, Unknown, TS=204 + VP-2031 DCT-CI, Philips, TS=188 + VP-2040 DCT-CI, Philips, TS=188, with CA daughter board + VP-2040 DCT-CI, Philips, TS=204, without CA daughter board + + Terrestrial + ------------------- + VP-3050 DTTNXT TS=188 + VP-3040 DTT-CI, Philips, TS=188 + VP-3040 DTT-CI, Philips, TS=204 + + ATSC + ------------------- + VP-3220 ATSCDI, TS=188 + VP-3250 ATSCAD, TS=188 + +*/ + +static struct dst_types dst_tlist[] = { + { + .device_id = "200103A", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_OBS_REGS, + .dst_feature = 0, + .tuner_type = 0 + }, /* obsolete */ + + { + .device_id = "DST-020", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1, + .dst_feature = 0, + .tuner_type = 0 + }, /* obsolete */ + + { + .device_id = "DST-030", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_1, + .dst_feature = 0, + .tuner_type = 0 + }, /* obsolete */ + + { + .device_id = "DST-03T", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2, + .dst_feature = DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 | DST_TYPE_HAS_DISEQC5 + | DST_TYPE_HAS_MAC | DST_TYPE_HAS_MOTO, + .tuner_type = TUNER_TYPE_MULTI + }, + + { + .device_id = "DST-MOT", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1, + .dst_feature = 0, + .tuner_type = 0 + }, /* obsolete */ + + { + .device_id = "DST-CI", + .offset = 1, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_1, + .dst_feature = DST_TYPE_HAS_CA, + .tuner_type = 0 + }, /* An OEM board */ + + { + .device_id = "DSTMCI", + .offset = 1, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD | DST_TYPE_HAS_INC_COUNT | DST_TYPE_HAS_VLF, + .dst_feature = DST_TYPE_HAS_CA | DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 + | DST_TYPE_HAS_MOTO | DST_TYPE_HAS_MAC, + .tuner_type = TUNER_TYPE_MULTI + }, + + { + .device_id = "DSTFCI", + .offset = 1, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_1, + .dst_feature = 0, + .tuner_type = 0 + }, /* unknown to vendor */ + + { + .device_id = "DCT-CI", + .offset = 1, + .dst_type = DST_TYPE_IS_CABLE, + .type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF, + .dst_feature = DST_TYPE_HAS_CA, + .tuner_type = 0 + }, + + { + .device_id = "DCTNEW", + .offset = 1, + .dst_type = DST_TYPE_IS_CABLE, + .type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_3 | DST_TYPE_HAS_FW_BUILD | DST_TYPE_HAS_MULTI_FE, + .dst_feature = 0, + .tuner_type = 0 + }, + + { + .device_id = "DTT-CI", + .offset = 1, + .dst_type = DST_TYPE_IS_TERR, + .type_flags = DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_VLF, + .dst_feature = DST_TYPE_HAS_CA, + .tuner_type = 0 + }, + + { + .device_id = "DTTDIG", + .offset = 1, + .dst_type = DST_TYPE_IS_TERR, + .type_flags = DST_TYPE_HAS_FW_2, + .dst_feature = 0, + .tuner_type = 0 + }, + + { + .device_id = "DTTNXT", + .offset = 1, + .dst_type = DST_TYPE_IS_TERR, + .type_flags = DST_TYPE_HAS_FW_2, + .dst_feature = DST_TYPE_HAS_ANALOG, + .tuner_type = 0 + }, + + { + .device_id = "ATSCDI", + .offset = 1, + .dst_type = DST_TYPE_IS_ATSC, + .type_flags = DST_TYPE_HAS_FW_2, + .dst_feature = 0, + .tuner_type = 0 + }, + + { + .device_id = "ATSCAD", + .offset = 1, + .dst_type = DST_TYPE_IS_ATSC, + .type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD, + .dst_feature = DST_TYPE_HAS_MAC | DST_TYPE_HAS_ANALOG, + .tuner_type = 0 + }, + + { } + +}; + +static int dst_get_mac(struct dst_state *state) +{ + u8 get_mac[] = { 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + get_mac[7] = dst_check_sum(get_mac, 7); + if (dst_command(state, get_mac, 8) < 0) { + dprintk(verbose, DST_INFO, 1, "Unsupported Command"); + return -1; + } + memset(&state->mac_address, '\0', 8); + memcpy(&state->mac_address, &state->rxbuffer, 6); + dprintk(verbose, DST_ERROR, 1, "MAC Address=[%pM]", state->mac_address); + + return 0; +} + +static int dst_fw_ver(struct dst_state *state) +{ + u8 get_ver[] = { 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + get_ver[7] = dst_check_sum(get_ver, 7); + if (dst_command(state, get_ver, 8) < 0) { + dprintk(verbose, DST_INFO, 1, "Unsupported Command"); + return -1; + } + memcpy(&state->fw_version, &state->rxbuffer, 8); + dprintk(verbose, DST_ERROR, 1, "Firmware Ver = %x.%x Build = %02x, on %x:%x, %x-%x-20%02x", + state->fw_version[0] >> 4, state->fw_version[0] & 0x0f, + state->fw_version[1], + state->fw_version[5], state->fw_version[6], + state->fw_version[4], state->fw_version[3], state->fw_version[2]); + + return 0; +} + +static int dst_card_type(struct dst_state *state) +{ + int j; + struct tuner_types *p_tuner_list = NULL; + + u8 get_type[] = { 0x00, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + get_type[7] = dst_check_sum(get_type, 7); + if (dst_command(state, get_type, 8) < 0) { + dprintk(verbose, DST_INFO, 1, "Unsupported Command"); + return -1; + } + memset(&state->card_info, '\0', 8); + memcpy(&state->card_info, &state->rxbuffer, 7); + dprintk(verbose, DST_ERROR, 1, "Device Model=[%s]", &state->card_info[0]); + + for (j = 0, p_tuner_list = tuner_list; j < ARRAY_SIZE(tuner_list); j++, p_tuner_list++) { + if (!strcmp(&state->card_info[0], p_tuner_list->board_name)) { + state->tuner_type = p_tuner_list->tuner_type; + dprintk(verbose, DST_ERROR, 1, "DST has [%s] tuner, tuner type=[%d]", + p_tuner_list->tuner_name, p_tuner_list->tuner_type); + } + } + + return 0; +} + +static int dst_get_vendor(struct dst_state *state) +{ + u8 get_vendor[] = { 0x00, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + get_vendor[7] = dst_check_sum(get_vendor, 7); + if (dst_command(state, get_vendor, 8) < 0) { + dprintk(verbose, DST_INFO, 1, "Unsupported Command"); + return -1; + } + memset(&state->vendor, '\0', 8); + memcpy(&state->vendor, &state->rxbuffer, 7); + dprintk(verbose, DST_ERROR, 1, "Vendor=[%s]", &state->vendor[0]); + + return 0; +} + +static void debug_dst_buffer(struct dst_state *state) +{ + int i; + + if (verbose > 2) { + printk("%s: [", __func__); + for (i = 0; i < 8; i++) + printk(" %02x", state->rxbuffer[i]); + printk("]\n"); + } +} + +static int dst_check_stv0299(struct dst_state *state) +{ + u8 check_stv0299[] = { 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + check_stv0299[7] = dst_check_sum(check_stv0299, 7); + if (dst_command(state, check_stv0299, 8) < 0) { + dprintk(verbose, DST_ERROR, 1, "Cmd=[0x04] failed"); + return -1; + } + debug_dst_buffer(state); + + if (memcmp(&check_stv0299, &state->rxbuffer, 8)) { + dprintk(verbose, DST_ERROR, 1, "Found a STV0299 NIM"); + state->tuner_type = TUNER_TYPE_STV0299; + return 0; + } + + return -1; +} + +static int dst_check_mb86a15(struct dst_state *state) +{ + u8 check_mb86a15[] = { 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + check_mb86a15[7] = dst_check_sum(check_mb86a15, 7); + if (dst_command(state, check_mb86a15, 8) < 0) { + dprintk(verbose, DST_ERROR, 1, "Cmd=[0x10], failed"); + return -1; + } + debug_dst_buffer(state); + + if (memcmp(&check_mb86a15, &state->rxbuffer, 8) < 0) { + dprintk(verbose, DST_ERROR, 1, "Found a MB86A15 NIM"); + state->tuner_type = TUNER_TYPE_MB86A15; + return 0; + } + + return -1; +} + +static int dst_get_tuner_info(struct dst_state *state) +{ + u8 get_tuner_1[] = { 0x00, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + u8 get_tuner_2[] = { 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + get_tuner_1[7] = dst_check_sum(get_tuner_1, 7); + get_tuner_2[7] = dst_check_sum(get_tuner_2, 7); + dprintk(verbose, DST_ERROR, 1, "DST TYpe = MULTI FE"); + if (state->type_flags & DST_TYPE_HAS_MULTI_FE) { + if (dst_command(state, get_tuner_1, 8) < 0) { + dprintk(verbose, DST_INFO, 1, "Cmd=[0x13], Unsupported"); + goto force; + } + } else { + if (dst_command(state, get_tuner_2, 8) < 0) { + dprintk(verbose, DST_INFO, 1, "Cmd=[0xb], Unsupported"); + goto force; + } + } + memcpy(&state->board_info, &state->rxbuffer, 8); + if (state->type_flags & DST_TYPE_HAS_MULTI_FE) { + dprintk(verbose, DST_ERROR, 1, "DST type has TS=188"); + } + if (state->board_info[0] == 0xbc) { + if (state->dst_type != DST_TYPE_IS_ATSC) + state->type_flags |= DST_TYPE_HAS_TS188; + else + state->type_flags |= DST_TYPE_HAS_NEWTUNE_2; + + if (state->board_info[1] == 0x01) { + state->dst_hw_cap |= DST_TYPE_HAS_DBOARD; + dprintk(verbose, DST_ERROR, 1, "DST has Daughterboard"); + } + } + + return 0; +force: + if (!strncmp(state->fw_name, "DCT-CI", 6)) { + state->type_flags |= DST_TYPE_HAS_TS204; + dprintk(verbose, DST_ERROR, 1, "Forcing [%s] to TS188", state->fw_name); + } + + return -1; +} + +static int dst_get_device_id(struct dst_state *state) +{ + u8 reply; + + int i, j; + struct dst_types *p_dst_type = NULL; + struct tuner_types *p_tuner_list = NULL; + + u8 use_dst_type = 0; + u32 use_type_flags = 0; + + static u8 device_type[8] = {0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff}; + + state->tuner_type = 0; + device_type[7] = dst_check_sum(device_type, 7); + + if (write_dst(state, device_type, FIXED_COMM)) + return -1; /* Write failed */ + if ((dst_pio_disable(state)) < 0) + return -1; + if (read_dst(state, &reply, GET_ACK)) + return -1; /* Read failure */ + if (reply != ACK) { + dprintk(verbose, DST_INFO, 1, "Write not Acknowledged! [Reply=0x%02x]", reply); + return -1; /* Unack'd write */ + } + if (!dst_wait_dst_ready(state, DEVICE_INIT)) + return -1; /* DST not ready yet */ + if (read_dst(state, state->rxbuffer, FIXED_COMM)) + return -1; + + dst_pio_disable(state); + if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) { + dprintk(verbose, DST_INFO, 1, "Checksum failure!"); + return -1; /* Checksum failure */ + } + state->rxbuffer[7] = '\0'; + + for (i = 0, p_dst_type = dst_tlist; i < ARRAY_SIZE(dst_tlist); i++, p_dst_type++) { + if (!strncmp (&state->rxbuffer[p_dst_type->offset], p_dst_type->device_id, strlen (p_dst_type->device_id))) { + use_type_flags = p_dst_type->type_flags; + use_dst_type = p_dst_type->dst_type; + + /* Card capabilities */ + state->dst_hw_cap = p_dst_type->dst_feature; + dprintk(verbose, DST_ERROR, 1, "Recognise [%s]", p_dst_type->device_id); + strncpy(&state->fw_name[0], p_dst_type->device_id, 6); + /* Multiple tuners */ + if (p_dst_type->tuner_type & TUNER_TYPE_MULTI) { + switch (use_dst_type) { + case DST_TYPE_IS_SAT: + /* STV0299 check */ + if (dst_check_stv0299(state) < 0) { + dprintk(verbose, DST_ERROR, 1, "Unsupported"); + state->tuner_type = TUNER_TYPE_MB86A15; + } + break; + default: + break; + } + if (dst_check_mb86a15(state) < 0) + dprintk(verbose, DST_ERROR, 1, "Unsupported"); + /* Single tuner */ + } else { + state->tuner_type = p_dst_type->tuner_type; + } + for (j = 0, p_tuner_list = tuner_list; j < ARRAY_SIZE(tuner_list); j++, p_tuner_list++) { + if (!(strncmp(p_dst_type->device_id, p_tuner_list->fw_name, 7)) && + p_tuner_list->tuner_type == state->tuner_type) { + dprintk(verbose, DST_ERROR, 1, "[%s] has a [%s]", + p_dst_type->device_id, p_tuner_list->tuner_name); + } + } + break; + } + } + + if (i >= ARRAY_SIZE(dst_tlist)) { + dprintk(verbose, DST_ERROR, 1, "Unable to recognize %s or %s", &state->rxbuffer[0], &state->rxbuffer[1]); + dprintk(verbose, DST_ERROR, 1, "please email linux-dvb@linuxtv.org with this type in"); + use_dst_type = DST_TYPE_IS_SAT; + use_type_flags = DST_TYPE_HAS_SYMDIV; + } + dst_type_print(state, use_dst_type); + state->type_flags = use_type_flags; + state->dst_type = use_dst_type; + dst_type_flags_print(state); + + return 0; +} + +static int dst_probe(struct dst_state *state) +{ + mutex_init(&state->dst_mutex); + if (dst_addons & DST_TYPE_HAS_CA) { + if ((rdc_8820_reset(state)) < 0) { + dprintk(verbose, DST_ERROR, 1, "RDC 8820 RESET Failed."); + return -1; + } + msleep(4000); + } else { + msleep(100); + } + if ((dst_comm_init(state)) < 0) { + dprintk(verbose, DST_ERROR, 1, "DST Initialization Failed."); + return -1; + } + msleep(100); + if (dst_get_device_id(state) < 0) { + dprintk(verbose, DST_ERROR, 1, "unknown device."); + return -1; + } + if (dst_get_mac(state) < 0) { + dprintk(verbose, DST_INFO, 1, "MAC: Unsupported command"); + } + if ((state->type_flags & DST_TYPE_HAS_MULTI_FE) || (state->type_flags & DST_TYPE_HAS_FW_BUILD)) { + if (dst_get_tuner_info(state) < 0) + dprintk(verbose, DST_INFO, 1, "Tuner: Unsupported command"); + } + if (state->type_flags & DST_TYPE_HAS_TS204) { + dst_packsize(state, 204); + } + if (state->type_flags & DST_TYPE_HAS_FW_BUILD) { + if (dst_fw_ver(state) < 0) { + dprintk(verbose, DST_INFO, 1, "FW: Unsupported command"); + return 0; + } + if (dst_card_type(state) < 0) { + dprintk(verbose, DST_INFO, 1, "Card: Unsupported command"); + return 0; + } + if (dst_get_vendor(state) < 0) { + dprintk(verbose, DST_INFO, 1, "Vendor: Unsupported command"); + return 0; + } + } + + return 0; +} + +static int dst_command(struct dst_state *state, u8 *data, u8 len) +{ + u8 reply; + + mutex_lock(&state->dst_mutex); + if ((dst_comm_init(state)) < 0) { + dprintk(verbose, DST_NOTICE, 1, "DST Communication Initialization Failed."); + goto error; + } + if (write_dst(state, data, len)) { + dprintk(verbose, DST_INFO, 1, "Trying to recover.. "); + if ((dst_error_recovery(state)) < 0) { + dprintk(verbose, DST_ERROR, 1, "Recovery Failed."); + goto error; + } + goto error; + } + if ((dst_pio_disable(state)) < 0) { + dprintk(verbose, DST_ERROR, 1, "PIO Disable Failed."); + goto error; + } + if (state->type_flags & DST_TYPE_HAS_FW_1) + mdelay(3); + if (read_dst(state, &reply, GET_ACK)) { + dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); + if ((dst_error_recovery(state)) < 0) { + dprintk(verbose, DST_INFO, 1, "Recovery Failed."); + goto error; + } + goto error; + } + if (reply != ACK) { + dprintk(verbose, DST_INFO, 1, "write not acknowledged 0x%02x ", reply); + goto error; + } + if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3)) + goto error; + if (state->type_flags & DST_TYPE_HAS_FW_1) + mdelay(3); + else + udelay(2000); + if (!dst_wait_dst_ready(state, NO_DELAY)) + goto error; + if (read_dst(state, state->rxbuffer, FIXED_COMM)) { + dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); + if ((dst_error_recovery(state)) < 0) { + dprintk(verbose, DST_INFO, 1, "Recovery failed."); + goto error; + } + goto error; + } + if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) { + dprintk(verbose, DST_INFO, 1, "checksum failure"); + goto error; + } + mutex_unlock(&state->dst_mutex); + return 0; + +error: + mutex_unlock(&state->dst_mutex); + return -EIO; + +} + +static int dst_get_signal(struct dst_state *state) +{ + int retval; + u8 get_signal[] = { 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfb }; + //dprintk("%s: Getting Signal strength and other parameters\n", __func__); + if ((state->diseq_flags & ATTEMPT_TUNE) == 0) { + state->decode_lock = state->decode_strength = state->decode_snr = 0; + return 0; + } + if (0 == (state->diseq_flags & HAS_LOCK)) { + state->decode_lock = state->decode_strength = state->decode_snr = 0; + return 0; + } + if (time_after_eq(jiffies, state->cur_jiff + (HZ / 5))) { + retval = dst_command(state, get_signal, 8); + if (retval < 0) + return retval; + if (state->dst_type == DST_TYPE_IS_SAT) { + state->decode_lock = ((state->rxbuffer[6] & 0x10) == 0) ? 1 : 0; + state->decode_strength = state->rxbuffer[5] << 8; + state->decode_snr = state->rxbuffer[2] << 8 | state->rxbuffer[3]; + } else if ((state->dst_type == DST_TYPE_IS_TERR) || (state->dst_type == DST_TYPE_IS_CABLE)) { + state->decode_lock = (state->rxbuffer[1]) ? 1 : 0; + state->decode_strength = state->rxbuffer[4] << 8; + state->decode_snr = state->rxbuffer[3] << 8; + } else if (state->dst_type == DST_TYPE_IS_ATSC) { + state->decode_lock = (state->rxbuffer[6] == 0x00) ? 1 : 0; + state->decode_strength = state->rxbuffer[4] << 8; + state->decode_snr = state->rxbuffer[2] << 8 | state->rxbuffer[3]; + } + state->cur_jiff = jiffies; + } + return 0; +} + +static int dst_tone_power_cmd(struct dst_state *state) +{ + u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 }; + + if (state->dst_type != DST_TYPE_IS_SAT) + return -EOPNOTSUPP; + paket[4] = state->tx_tuna[4]; + paket[2] = state->tx_tuna[2]; + paket[3] = state->tx_tuna[3]; + paket[7] = dst_check_sum (paket, 7); + return dst_command(state, paket, 8); +} + +static int dst_get_tuna(struct dst_state *state) +{ + int retval; + + if ((state->diseq_flags & ATTEMPT_TUNE) == 0) + return 0; + state->diseq_flags &= ~(HAS_LOCK); + if (!dst_wait_dst_ready(state, NO_DELAY)) + return -EIO; + if ((state->type_flags & DST_TYPE_HAS_VLF) && + !(state->dst_type == DST_TYPE_IS_ATSC)) + + retval = read_dst(state, state->rx_tuna, 10); + else + retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM); + if (retval < 0) { + dprintk(verbose, DST_DEBUG, 1, "read not successful"); + return retval; + } + if ((state->type_flags & DST_TYPE_HAS_VLF) && + !(state->dst_type == DST_TYPE_IS_ATSC)) { + + if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) { + dprintk(verbose, DST_INFO, 1, "checksum failure ? "); + return -EIO; + } + } else { + if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[2], 7)) { + dprintk(verbose, DST_INFO, 1, "checksum failure? "); + return -EIO; + } + } + if (state->rx_tuna[2] == 0 && state->rx_tuna[3] == 0) + return 0; + if (state->dst_type == DST_TYPE_IS_SAT) { + state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3]; + } else { + state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 16) + (state->rx_tuna[3] << 8) + state->rx_tuna[4]; + } + state->decode_freq = state->decode_freq * 1000; + state->decode_lock = 1; + state->diseq_flags |= HAS_LOCK; + + return 1; +} + +static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage); + +static int dst_write_tuna(struct dvb_frontend *fe) +{ + struct dst_state *state = fe->demodulator_priv; + int retval; + u8 reply; + + dprintk(verbose, DST_INFO, 1, "type_flags 0x%x ", state->type_flags); + state->decode_freq = 0; + state->decode_lock = state->decode_strength = state->decode_snr = 0; + if (state->dst_type == DST_TYPE_IS_SAT) { + if (!(state->diseq_flags & HAS_POWER)) + dst_set_voltage(fe, SEC_VOLTAGE_13); + } + state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE); + mutex_lock(&state->dst_mutex); + if ((dst_comm_init(state)) < 0) { + dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed."); + goto error; + } +// if (state->type_flags & DST_TYPE_HAS_NEWTUNE) { + if ((state->type_flags & DST_TYPE_HAS_VLF) && + (!(state->dst_type == DST_TYPE_IS_ATSC))) { + + state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9); + retval = write_dst(state, &state->tx_tuna[0], 10); + } else { + state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[2], 7); + retval = write_dst(state, &state->tx_tuna[2], FIXED_COMM); + } + if (retval < 0) { + dst_pio_disable(state); + dprintk(verbose, DST_DEBUG, 1, "write not successful"); + goto werr; + } + if ((dst_pio_disable(state)) < 0) { + dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !"); + goto error; + } + if ((read_dst(state, &reply, GET_ACK) < 0)) { + dprintk(verbose, DST_DEBUG, 1, "read verify not successful."); + goto error; + } + if (reply != ACK) { + dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply); + goto error; + } + state->diseq_flags |= ATTEMPT_TUNE; + retval = dst_get_tuna(state); +werr: + mutex_unlock(&state->dst_mutex); + return retval; + +error: + mutex_unlock(&state->dst_mutex); + return -EIO; +} + +/* + * line22k0 0x00, 0x09, 0x00, 0xff, 0x01, 0x00, 0x00, 0x00 + * line22k1 0x00, 0x09, 0x01, 0xff, 0x01, 0x00, 0x00, 0x00 + * line22k2 0x00, 0x09, 0x02, 0xff, 0x01, 0x00, 0x00, 0x00 + * tone 0x00, 0x09, 0xff, 0x00, 0x01, 0x00, 0x00, 0x00 + * data 0x00, 0x09, 0xff, 0x01, 0x01, 0x00, 0x00, 0x00 + * power_off 0x00, 0x09, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00 + * power_on 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 + * Diseqc 1 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec + * Diseqc 2 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf4, 0xe8 + * Diseqc 3 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf8, 0xe4 + * Diseqc 4 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xfc, 0xe0 + */ + +static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd) +{ + struct dst_state *state = fe->demodulator_priv; + u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; + + if (state->dst_type != DST_TYPE_IS_SAT) + return -EOPNOTSUPP; + if (cmd->msg_len > 0 && cmd->msg_len < 5) + memcpy(&paket[3], cmd->msg, cmd->msg_len); + else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5) + memcpy(&paket[2], cmd->msg, cmd->msg_len); + else + return -EINVAL; + paket[7] = dst_check_sum(&paket[0], 7); + return dst_command(state, paket, 8); +} + +static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + int need_cmd, retval = 0; + struct dst_state *state = fe->demodulator_priv; + + state->voltage = voltage; + if (state->dst_type != DST_TYPE_IS_SAT) + return -EOPNOTSUPP; + + need_cmd = 0; + + switch (voltage) { + case SEC_VOLTAGE_13: + case SEC_VOLTAGE_18: + if ((state->diseq_flags & HAS_POWER) == 0) + need_cmd = 1; + state->diseq_flags |= HAS_POWER; + state->tx_tuna[4] = 0x01; + break; + case SEC_VOLTAGE_OFF: + need_cmd = 1; + state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE); + state->tx_tuna[4] = 0x00; + break; + default: + return -EINVAL; + } + + if (need_cmd) + retval = dst_tone_power_cmd(state); + + return retval; +} + +static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct dst_state *state = fe->demodulator_priv; + + state->tone = tone; + if (state->dst_type != DST_TYPE_IS_SAT) + return -EOPNOTSUPP; + + switch (tone) { + case SEC_TONE_OFF: + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) + state->tx_tuna[2] = 0x00; + else + state->tx_tuna[2] = 0xff; + break; + + case SEC_TONE_ON: + state->tx_tuna[2] = 0x02; + break; + default: + return -EINVAL; + } + return dst_tone_power_cmd(state); +} + +static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) +{ + struct dst_state *state = fe->demodulator_priv; + + if (state->dst_type != DST_TYPE_IS_SAT) + return -EOPNOTSUPP; + state->minicmd = minicmd; + switch (minicmd) { + case SEC_MINI_A: + state->tx_tuna[3] = 0x02; + break; + case SEC_MINI_B: + state->tx_tuna[3] = 0xff; + break; + } + return dst_tone_power_cmd(state); +} + + +static int dst_init(struct dvb_frontend *fe) +{ + struct dst_state *state = fe->demodulator_priv; + + static u8 sat_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x00, 0x73, 0x21, 0x00, 0x00 }; + static u8 sat_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x55, 0xbd, 0x50, 0x00, 0x00 }; + static u8 ter_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; + static u8 ter_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; + static u8 cab_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; + static u8 cab_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; + static u8 atsc_tuner[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; + + state->inversion = INVERSION_OFF; + state->voltage = SEC_VOLTAGE_13; + state->tone = SEC_TONE_OFF; + state->diseq_flags = 0; + state->k22 = 0x02; + state->bandwidth = 7000000; + state->cur_jiff = jiffies; + if (state->dst_type == DST_TYPE_IS_SAT) + memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? sat_tuna_188 : sat_tuna_204), sizeof (sat_tuna_204)); + else if (state->dst_type == DST_TYPE_IS_TERR) + memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? ter_tuna_188 : ter_tuna_204), sizeof (ter_tuna_204)); + else if (state->dst_type == DST_TYPE_IS_CABLE) + memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? cab_tuna_188 : cab_tuna_204), sizeof (cab_tuna_204)); + else if (state->dst_type == DST_TYPE_IS_ATSC) + memcpy(state->tx_tuna, atsc_tuner, sizeof (atsc_tuner)); + + return 0; +} + +static int dst_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct dst_state *state = fe->demodulator_priv; + + *status = 0; + if (state->diseq_flags & HAS_LOCK) { +// dst_get_signal(state); // don't require(?) to ask MCU + if (state->decode_lock) + *status |= FE_HAS_LOCK | FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC | FE_HAS_VITERBI; + } + + return 0; +} + +static int dst_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct dst_state *state = fe->demodulator_priv; + + int retval = dst_get_signal(state); + *strength = state->decode_strength; + + return retval; +} + +static int dst_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct dst_state *state = fe->demodulator_priv; + + int retval = dst_get_signal(state); + *snr = state->decode_snr; + + return retval; +} + +static int dst_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + int retval = -EINVAL; + struct dst_state *state = fe->demodulator_priv; + + if (p != NULL) { + retval = dst_set_freq(state, p->frequency); + if(retval != 0) + return retval; + dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency); + + if (state->dst_type == DST_TYPE_IS_SAT) { + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) + dst_set_inversion(state, p->inversion); + dst_set_fec(state, p->fec_inner); + dst_set_symbolrate(state, p->symbol_rate); + dst_set_polarization(state); + dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->symbol_rate); + + } else if (state->dst_type == DST_TYPE_IS_TERR) + dst_set_bandwidth(state, p->bandwidth_hz); + else if (state->dst_type == DST_TYPE_IS_CABLE) { + dst_set_fec(state, p->fec_inner); + dst_set_symbolrate(state, p->symbol_rate); + dst_set_modulation(state, p->modulation); + } + retval = dst_write_tuna(fe); + } + + return retval; +} + +static int dst_tune_frontend(struct dvb_frontend* fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + fe_status_t *status) +{ + struct dst_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + + if (re_tune) { + dst_set_freq(state, p->frequency); + dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency); + + if (state->dst_type == DST_TYPE_IS_SAT) { + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) + dst_set_inversion(state, p->inversion); + dst_set_fec(state, p->fec_inner); + dst_set_symbolrate(state, p->symbol_rate); + dst_set_polarization(state); + dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->symbol_rate); + + } else if (state->dst_type == DST_TYPE_IS_TERR) + dst_set_bandwidth(state, p->bandwidth_hz); + else if (state->dst_type == DST_TYPE_IS_CABLE) { + dst_set_fec(state, p->fec_inner); + dst_set_symbolrate(state, p->symbol_rate); + dst_set_modulation(state, p->modulation); + } + dst_write_tuna(fe); + } + + if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) + dst_read_status(fe, status); + + *delay = HZ/10; + return 0; +} + +static int dst_get_tuning_algo(struct dvb_frontend *fe) +{ + return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW; +} + +static int dst_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dst_state *state = fe->demodulator_priv; + + p->frequency = state->decode_freq; + if (state->dst_type == DST_TYPE_IS_SAT) { + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) + p->inversion = state->inversion; + p->symbol_rate = state->symbol_rate; + p->fec_inner = dst_get_fec(state); + } else if (state->dst_type == DST_TYPE_IS_TERR) { + p->bandwidth_hz = state->bandwidth; + } else if (state->dst_type == DST_TYPE_IS_CABLE) { + p->symbol_rate = state->symbol_rate; + p->fec_inner = dst_get_fec(state); + p->modulation = dst_get_modulation(state); + } + + return 0; +} + +static void dst_release(struct dvb_frontend *fe) +{ + struct dst_state *state = fe->demodulator_priv; + if (state->dst_ca) { + dvb_unregister_device(state->dst_ca); +#ifdef CONFIG_MEDIA_ATTACH + symbol_put(dst_ca_attach); +#endif + } + kfree(state); +} + +static struct dvb_frontend_ops dst_dvbt_ops; +static struct dvb_frontend_ops dst_dvbs_ops; +static struct dvb_frontend_ops dst_dvbc_ops; +static struct dvb_frontend_ops dst_atsc_ops; + +struct dst_state *dst_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter) +{ + /* check if the ASIC is there */ + if (dst_probe(state) < 0) { + kfree(state); + return NULL; + } + /* determine settings based on type */ + /* create dvb_frontend */ + switch (state->dst_type) { + case DST_TYPE_IS_TERR: + memcpy(&state->frontend.ops, &dst_dvbt_ops, sizeof(struct dvb_frontend_ops)); + break; + case DST_TYPE_IS_CABLE: + memcpy(&state->frontend.ops, &dst_dvbc_ops, sizeof(struct dvb_frontend_ops)); + break; + case DST_TYPE_IS_SAT: + memcpy(&state->frontend.ops, &dst_dvbs_ops, sizeof(struct dvb_frontend_ops)); + break; + case DST_TYPE_IS_ATSC: + memcpy(&state->frontend.ops, &dst_atsc_ops, sizeof(struct dvb_frontend_ops)); + break; + default: + dprintk(verbose, DST_ERROR, 1, "unknown DST type. please report to the LinuxTV.org DVB mailinglist."); + kfree(state); + return NULL; + } + state->frontend.demodulator_priv = state; + + return state; /* Manu (DST is a card not a frontend) */ +} + +EXPORT_SYMBOL(dst_attach); + +static struct dvb_frontend_ops dst_dvbt_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "DST DVB-T", + .frequency_min = 137000000, + .frequency_max = 858000000, + .frequency_stepsize = 166667, + .caps = FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | + FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO + }, + + .release = dst_release, + .init = dst_init, + .tune = dst_tune_frontend, + .set_frontend = dst_set_frontend, + .get_frontend = dst_get_frontend, + .get_frontend_algo = dst_get_tuning_algo, + .read_status = dst_read_status, + .read_signal_strength = dst_read_signal_strength, + .read_snr = dst_read_snr, +}; + +static struct dvb_frontend_ops dst_dvbs_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "DST DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, /* kHz for QPSK frontends */ + .frequency_tolerance = 29500, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + /* . symbol_rate_tolerance = ???,*/ + .caps = FE_CAN_FEC_AUTO | FE_CAN_QPSK + }, + + .release = dst_release, + .init = dst_init, + .tune = dst_tune_frontend, + .set_frontend = dst_set_frontend, + .get_frontend = dst_get_frontend, + .get_frontend_algo = dst_get_tuning_algo, + .read_status = dst_read_status, + .read_signal_strength = dst_read_signal_strength, + .read_snr = dst_read_snr, + .diseqc_send_burst = dst_send_burst, + .diseqc_send_master_cmd = dst_set_diseqc, + .set_voltage = dst_set_voltage, + .set_tone = dst_set_tone, +}; + +static struct dvb_frontend_ops dst_dvbc_ops = { + .delsys = { SYS_DVBC_ANNEX_A }, + .info = { + .name = "DST DVB-C", + .frequency_stepsize = 62500, + .frequency_min = 51000000, + .frequency_max = 858000000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | + FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 + }, + + .release = dst_release, + .init = dst_init, + .tune = dst_tune_frontend, + .set_frontend = dst_set_frontend, + .get_frontend = dst_get_frontend, + .get_frontend_algo = dst_get_tuning_algo, + .read_status = dst_read_status, + .read_signal_strength = dst_read_signal_strength, + .read_snr = dst_read_snr, +}; + +static struct dvb_frontend_ops dst_atsc_ops = { + .delsys = { SYS_ATSC }, + .info = { + .name = "DST ATSC", + .frequency_stepsize = 62500, + .frequency_min = 510000000, + .frequency_max = 858000000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO | FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + + .release = dst_release, + .init = dst_init, + .tune = dst_tune_frontend, + .set_frontend = dst_set_frontend, + .get_frontend = dst_get_frontend, + .get_frontend_algo = dst_get_tuning_algo, + .read_status = dst_read_status, + .read_signal_strength = dst_read_signal_strength, + .read_snr = dst_read_snr, +}; + +MODULE_DESCRIPTION("DST DVB-S/T/C/ATSC Combo Frontend driver"); +MODULE_AUTHOR("Jamie Honan, Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/bt8xx/dst_ca.c b/drivers/media/pci/bt8xx/dst_ca.c new file mode 100644 index 00000000..0e788fca --- /dev/null +++ b/drivers/media/pci/bt8xx/dst_ca.c @@ -0,0 +1,726 @@ +/* + CA-driver for TwinHan DST Frontend/Card + + Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include "dvbdev.h" +#include "dvb_frontend.h" +#include "dst_ca.h" +#include "dst_common.h" + +#define DST_CA_ERROR 0 +#define DST_CA_NOTICE 1 +#define DST_CA_INFO 2 +#define DST_CA_DEBUG 3 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((x > DST_CA_ERROR) && (x > y)) \ + printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ + else if ((x > DST_CA_NOTICE) && (x > y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ + else if ((x > DST_CA_INFO) && (x > y)) \ + printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ + else if ((x > DST_CA_DEBUG) && (x > y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ + } else { \ + if (x > y) \ + printk(format, ## arg); \ + } \ +} while(0) + + +static DEFINE_MUTEX(dst_ca_mutex); +static unsigned int verbose = 5; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +/* Need some more work */ +static int ca_set_slot_descr(void) +{ + /* We could make this more graceful ? */ + return -EOPNOTSUPP; +} + +/* Need some more work */ +static int ca_set_pid(void) +{ + /* We could make this more graceful ? */ + return -EOPNOTSUPP; +} + +static void put_command_and_length(u8 *data, int command, int length) +{ + data[0] = (command >> 16) & 0xff; + data[1] = (command >> 8) & 0xff; + data[2] = command & 0xff; + data[3] = length; +} + +static void put_checksum(u8 *check_string, int length) +{ + dprintk(verbose, DST_CA_DEBUG, 1, " Computing string checksum."); + dprintk(verbose, DST_CA_DEBUG, 1, " -> string length : 0x%02x", length); + check_string[length] = dst_check_sum (check_string, length); + dprintk(verbose, DST_CA_DEBUG, 1, " -> checksum : 0x%02x", check_string[length]); +} + +static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8 len, int read) +{ + u8 reply; + + mutex_lock(&state->dst_mutex); + dst_comm_init(state); + msleep(65); + + if (write_dst(state, data, len)) { + dprintk(verbose, DST_CA_INFO, 1, " Write not successful, trying to recover"); + dst_error_recovery(state); + goto error; + } + if ((dst_pio_disable(state)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " DST PIO disable failed."); + goto error; + } + if (read_dst(state, &reply, GET_ACK) < 0) { + dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover"); + dst_error_recovery(state); + goto error; + } + if (read) { + if (! dst_wait_dst_ready(state, LONG_DELAY)) { + dprintk(verbose, DST_CA_NOTICE, 1, " 8820 not ready"); + goto error; + } + if (read_dst(state, ca_string, 128) < 0) { /* Try to make this dynamic */ + dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover"); + dst_error_recovery(state); + goto error; + } + } + mutex_unlock(&state->dst_mutex); + return 0; + +error: + mutex_unlock(&state->dst_mutex); + return -EIO; +} + + +static int dst_put_ci(struct dst_state *state, u8 *data, int len, u8 *ca_string, int read) +{ + u8 dst_ca_comm_err = 0; + + while (dst_ca_comm_err < RETRIES) { + dprintk(verbose, DST_CA_NOTICE, 1, " Put Command"); + if (dst_ci_command(state, data, ca_string, len, read)) { // If error + dst_error_recovery(state); + dst_ca_comm_err++; // work required here. + } else { + break; + } + } + + if(dst_ca_comm_err == RETRIES) + return -1; + + return 0; +} + + + +static int ca_get_app_info(struct dst_state *state) +{ + int length, str_length; + static u8 command[8] = {0x07, 0x40, 0x01, 0x00, 0x01, 0x00, 0x00, 0xff}; + + put_checksum(&command[0], command[0]); + if ((dst_put_ci(state, command, sizeof(command), state->messages, GET_REPLY)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !"); + return -1; + } + dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !"); + dprintk(verbose, DST_CA_INFO, 1, " ================================ CI Module Application Info ======================================"); + dprintk(verbose, DST_CA_INFO, 1, " Application Type=[%d], Application Vendor=[%d], Vendor Code=[%d]\n%s: Application info=[%s]", + state->messages[7], (state->messages[8] << 8) | state->messages[9], + (state->messages[10] << 8) | state->messages[11], __func__, (char *)(&state->messages[12])); + dprintk(verbose, DST_CA_INFO, 1, " =================================================================================================="); + + // Transform dst message to correct application_info message + length = state->messages[5]; + str_length = length - 6; + if (str_length < 0) { + str_length = 0; + dprintk(verbose, DST_CA_ERROR, 1, "Invalid string length returned in ca_get_app_info(). Recovering."); + } + + // First, the command and length fields + put_command_and_length(&state->messages[0], CA_APP_INFO, length); + + // Copy application_type, application_manufacturer and manufacturer_code + memmove(&state->messages[4], &state->messages[7], 5); + + // Set string length and copy string + state->messages[9] = str_length; + memmove(&state->messages[10], &state->messages[12], str_length); + + return 0; +} + +static int ca_get_ca_info(struct dst_state *state) +{ + int srcPtr, dstPtr, i, num_ids; + static u8 slot_command[8] = {0x07, 0x40, 0x00, 0x00, 0x02, 0x00, 0x00, 0xff}; + const int in_system_id_pos = 8, out_system_id_pos = 4, in_num_ids_pos = 7; + + put_checksum(&slot_command[0], slot_command[0]); + if ((dst_put_ci(state, slot_command, sizeof (slot_command), state->messages, GET_REPLY)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !"); + return -1; + } + dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !"); + + // Print raw data + dprintk(verbose, DST_CA_INFO, 0, " DST data = ["); + for (i = 0; i < state->messages[0] + 1; i++) { + dprintk(verbose, DST_CA_INFO, 0, " 0x%02x", state->messages[i]); + } + dprintk(verbose, DST_CA_INFO, 0, "]\n"); + + // Set the command and length of the output + num_ids = state->messages[in_num_ids_pos]; + if (num_ids >= 100) { + num_ids = 100; + dprintk(verbose, DST_CA_ERROR, 1, "Invalid number of ids (>100). Recovering."); + } + put_command_and_length(&state->messages[0], CA_INFO, num_ids * 2); + + dprintk(verbose, DST_CA_INFO, 0, " CA_INFO = ["); + srcPtr = in_system_id_pos; + dstPtr = out_system_id_pos; + for(i = 0; i < num_ids; i++) { + dprintk(verbose, DST_CA_INFO, 0, " 0x%02x%02x", state->messages[srcPtr + 0], state->messages[srcPtr + 1]); + // Append to output + state->messages[dstPtr + 0] = state->messages[srcPtr + 0]; + state->messages[dstPtr + 1] = state->messages[srcPtr + 1]; + srcPtr += 2; + dstPtr += 2; + } + dprintk(verbose, DST_CA_INFO, 0, "]\n"); + + return 0; +} + +static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, void __user *arg) +{ + int i; + u8 slot_cap[256]; + static u8 slot_command[8] = {0x07, 0x40, 0x02, 0x00, 0x02, 0x00, 0x00, 0xff}; + + put_checksum(&slot_command[0], slot_command[0]); + if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_cap, GET_REPLY)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !"); + return -1; + } + dprintk(verbose, DST_CA_NOTICE, 1, " -->dst_put_ci SUCCESS !"); + + /* Will implement the rest soon */ + + dprintk(verbose, DST_CA_INFO, 1, " Slot cap = [%d]", slot_cap[7]); + dprintk(verbose, DST_CA_INFO, 0, "===================================\n"); + for (i = 0; i < slot_cap[0] + 1; i++) + dprintk(verbose, DST_CA_INFO, 0, " %d", slot_cap[i]); + dprintk(verbose, DST_CA_INFO, 0, "\n"); + + p_ca_caps->slot_num = 1; + p_ca_caps->slot_type = 1; + p_ca_caps->descr_num = slot_cap[7]; + p_ca_caps->descr_type = 1; + + if (copy_to_user(arg, p_ca_caps, sizeof (struct ca_caps))) + return -EFAULT; + + return 0; +} + +/* Need some more work */ +static int ca_get_slot_descr(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg) +{ + return -EOPNOTSUPP; +} + + +static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_slot_info, void __user *arg) +{ + int i; + static u8 slot_command[8] = {0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff}; + + u8 *slot_info = state->messages; + + put_checksum(&slot_command[0], 7); + if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_info, GET_REPLY)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !"); + return -1; + } + dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !"); + + /* Will implement the rest soon */ + + dprintk(verbose, DST_CA_INFO, 1, " Slot info = [%d]", slot_info[3]); + dprintk(verbose, DST_CA_INFO, 0, "===================================\n"); + for (i = 0; i < 8; i++) + dprintk(verbose, DST_CA_INFO, 0, " %d", slot_info[i]); + dprintk(verbose, DST_CA_INFO, 0, "\n"); + + if (slot_info[4] & 0x80) { + p_ca_slot_info->flags = CA_CI_MODULE_PRESENT; + p_ca_slot_info->num = 1; + p_ca_slot_info->type = CA_CI; + } else if (slot_info[4] & 0x40) { + p_ca_slot_info->flags = CA_CI_MODULE_READY; + p_ca_slot_info->num = 1; + p_ca_slot_info->type = CA_CI; + } else + p_ca_slot_info->flags = 0; + + if (copy_to_user(arg, p_ca_slot_info, sizeof (struct ca_slot_info))) + return -EFAULT; + + return 0; +} + + +static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg) +{ + u8 i = 0; + u32 command = 0; + + if (copy_from_user(p_ca_message, arg, sizeof (struct ca_msg))) + return -EFAULT; + + if (p_ca_message->msg) { + dprintk(verbose, DST_CA_NOTICE, 1, " Message = [%*ph]", + 3, p_ca_message->msg); + + for (i = 0; i < 3; i++) { + command = command | p_ca_message->msg[i]; + if (i < 2) + command = command << 8; + } + dprintk(verbose, DST_CA_NOTICE, 1, " Command=[0x%x]", command); + + switch (command) { + case CA_APP_INFO: + memcpy(p_ca_message->msg, state->messages, 128); + if (copy_to_user(arg, p_ca_message, sizeof (struct ca_msg)) ) + return -EFAULT; + break; + case CA_INFO: + memcpy(p_ca_message->msg, state->messages, 128); + if (copy_to_user(arg, p_ca_message, sizeof (struct ca_msg)) ) + return -EFAULT; + break; + } + } + + return 0; +} + +static int handle_dst_tag(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u32 length) +{ + if (state->dst_hw_cap & DST_TYPE_HAS_SESSION) { + hw_buffer->msg[2] = p_ca_message->msg[1]; /* MSB */ + hw_buffer->msg[3] = p_ca_message->msg[2]; /* LSB */ + } else { + if (length > 247) { + dprintk(verbose, DST_CA_ERROR, 1, " Message too long ! *** Bailing Out *** !"); + return -1; + } + hw_buffer->msg[0] = (length & 0xff) + 7; + hw_buffer->msg[1] = 0x40; + hw_buffer->msg[2] = 0x03; + hw_buffer->msg[3] = 0x00; + hw_buffer->msg[4] = 0x03; + hw_buffer->msg[5] = length & 0xff; + hw_buffer->msg[6] = 0x00; + + /* + * Need to compute length for EN50221 section 8.3.2, for the time being + * assuming 8.3.2 is not applicable + */ + memcpy(&hw_buffer->msg[7], &p_ca_message->msg[4], length); + } + + return 0; +} + +static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 length, u8 reply) +{ + if ((dst_put_ci(state, hw_buffer->msg, length, hw_buffer->msg, reply)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " DST-CI Command failed."); + dprintk(verbose, DST_CA_NOTICE, 1, " Resetting DST."); + rdc_reset_state(state); + return -1; + } + dprintk(verbose, DST_CA_NOTICE, 1, " DST-CI Command success."); + + return 0; +} + +static u32 asn_1_decode(u8 *asn_1_array) +{ + u8 length_field = 0, word_count = 0, count = 0; + u32 length = 0; + + length_field = asn_1_array[0]; + dprintk(verbose, DST_CA_DEBUG, 1, " Length field=[%02x]", length_field); + if (length_field < 0x80) { + length = length_field & 0x7f; + dprintk(verbose, DST_CA_DEBUG, 1, " Length=[%02x]\n", length); + } else { + word_count = length_field & 0x7f; + for (count = 0; count < word_count; count++) { + length = length << 8; + length += asn_1_array[count + 1]; + dprintk(verbose, DST_CA_DEBUG, 1, " Length=[%04x]", length); + } + } + return length; +} + +static int debug_string(u8 *msg, u32 length, u32 offset) +{ + u32 i; + + dprintk(verbose, DST_CA_DEBUG, 0, " String=[ "); + for (i = offset; i < length; i++) + dprintk(verbose, DST_CA_DEBUG, 0, "%02x ", msg[i]); + dprintk(verbose, DST_CA_DEBUG, 0, "]\n"); + + return 0; +} + + +static int ca_set_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u8 reply, u8 query) +{ + u32 length = 0; + u8 tag_length = 8; + + length = asn_1_decode(&p_ca_message->msg[3]); + dprintk(verbose, DST_CA_DEBUG, 1, " CA Message length=[%d]", length); + debug_string(&p_ca_message->msg[4], length, 0); /* length is excluding tag & length */ + + memset(hw_buffer->msg, '\0', length); + handle_dst_tag(state, p_ca_message, hw_buffer, length); + put_checksum(hw_buffer->msg, hw_buffer->msg[0]); + + debug_string(hw_buffer->msg, (length + tag_length), 0); /* tags too */ + write_to_8820(state, hw_buffer, (length + tag_length), reply); + + return 0; +} + + +/* Board supports CA PMT reply ? */ +static int dst_check_ca_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer) +{ + int ca_pmt_reply_test = 0; + + /* Do test board */ + /* Not there yet but soon */ + + /* CA PMT Reply capable */ + if (ca_pmt_reply_test) { + if ((ca_set_pmt(state, p_ca_message, hw_buffer, 1, GET_REPLY)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " ca_set_pmt.. failed !"); + return -1; + } + + /* Process CA PMT Reply */ + /* will implement soon */ + dprintk(verbose, DST_CA_ERROR, 1, " Not there yet"); + } + /* CA PMT Reply not capable */ + if (!ca_pmt_reply_test) { + if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, NO_REPLY)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " ca_set_pmt.. failed !"); + return -1; + } + dprintk(verbose, DST_CA_NOTICE, 1, " ca_set_pmt.. success !"); + /* put a dummy message */ + + } + return 0; +} + +static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg) +{ + int i = 0; + + u32 command = 0; + struct ca_msg *hw_buffer; + int result = 0; + + if ((hw_buffer = kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) { + dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure"); + return -ENOMEM; + } + dprintk(verbose, DST_CA_DEBUG, 1, " "); + + if (copy_from_user(p_ca_message, arg, sizeof (struct ca_msg))) { + result = -EFAULT; + goto free_mem_and_exit; + } + + + if (p_ca_message->msg) { + /* EN50221 tag */ + command = 0; + + for (i = 0; i < 3; i++) { + command = command | p_ca_message->msg[i]; + if (i < 2) + command = command << 8; + } + dprintk(verbose, DST_CA_DEBUG, 1, " Command=[0x%x]\n", command); + + switch (command) { + case CA_PMT: + dprintk(verbose, DST_CA_DEBUG, 1, "Command = SEND_CA_PMT"); + if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) { // code simplification started + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_PMT Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_PMT Success !"); + break; + case CA_PMT_REPLY: + dprintk(verbose, DST_CA_INFO, 1, "Command = CA_PMT_REPLY"); + /* Have to handle the 2 basic types of cards here */ + if ((dst_check_ca_pmt(state, p_ca_message, hw_buffer)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_PMT_REPLY Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_PMT_REPLY Success !"); + break; + case CA_APP_INFO_ENQUIRY: // only for debugging + dprintk(verbose, DST_CA_INFO, 1, " Getting Cam Application information"); + + if ((ca_get_app_info(state)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_APP_INFO_ENQUIRY Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_APP_INFO_ENQUIRY Success !"); + break; + case CA_INFO_ENQUIRY: + dprintk(verbose, DST_CA_INFO, 1, " Getting CA Information"); + + if ((ca_get_ca_info(state)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_INFO_ENQUIRY Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_INFO_ENQUIRY Success !"); + break; + } + } +free_mem_and_exit: + kfree (hw_buffer); + + return result; +} + +static long dst_ca_ioctl(struct file *file, unsigned int cmd, unsigned long ioctl_arg) +{ + struct dvb_device *dvbdev; + struct dst_state *state; + struct ca_slot_info *p_ca_slot_info; + struct ca_caps *p_ca_caps; + struct ca_msg *p_ca_message; + void __user *arg = (void __user *)ioctl_arg; + int result = 0; + + mutex_lock(&dst_ca_mutex); + dvbdev = file->private_data; + state = (struct dst_state *)dvbdev->priv; + p_ca_message = kmalloc(sizeof (struct ca_msg), GFP_KERNEL); + p_ca_slot_info = kmalloc(sizeof (struct ca_slot_info), GFP_KERNEL); + p_ca_caps = kmalloc(sizeof (struct ca_caps), GFP_KERNEL); + if (!p_ca_message || !p_ca_slot_info || !p_ca_caps) { + dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure"); + result = -ENOMEM; + goto free_mem_and_exit; + } + + /* We have now only the standard ioctl's, the driver is upposed to handle internals. */ + switch (cmd) { + case CA_SEND_MSG: + dprintk(verbose, DST_CA_INFO, 1, " Sending message"); + if ((ca_send_message(state, p_ca_message, arg)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SEND_MSG Failed !"); + result = -1; + goto free_mem_and_exit; + } + break; + case CA_GET_MSG: + dprintk(verbose, DST_CA_INFO, 1, " Getting message"); + if ((ca_get_message(state, p_ca_message, arg)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_MSG Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_MSG Success !"); + break; + case CA_RESET: + dprintk(verbose, DST_CA_ERROR, 1, " Resetting DST"); + dst_error_bailout(state); + msleep(4000); + break; + case CA_GET_SLOT_INFO: + dprintk(verbose, DST_CA_INFO, 1, " Getting Slot info"); + if ((ca_get_slot_info(state, p_ca_slot_info, arg)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_SLOT_INFO Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_SLOT_INFO Success !"); + break; + case CA_GET_CAP: + dprintk(verbose, DST_CA_INFO, 1, " Getting Slot capabilities"); + if ((ca_get_slot_caps(state, p_ca_caps, arg)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_CAP Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_CAP Success !"); + break; + case CA_GET_DESCR_INFO: + dprintk(verbose, DST_CA_INFO, 1, " Getting descrambler description"); + if ((ca_get_slot_descr(state, p_ca_message, arg)) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_DESCR_INFO Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_DESCR_INFO Success !"); + break; + case CA_SET_DESCR: + dprintk(verbose, DST_CA_INFO, 1, " Setting descrambler"); + if ((ca_set_slot_descr()) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SET_DESCR Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_DESCR Success !"); + break; + case CA_SET_PID: + dprintk(verbose, DST_CA_INFO, 1, " Setting PID"); + if ((ca_set_pid()) < 0) { + dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SET_PID Failed !"); + result = -1; + goto free_mem_and_exit; + } + dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_PID Success !"); + default: + result = -EOPNOTSUPP; + } + free_mem_and_exit: + kfree (p_ca_message); + kfree (p_ca_slot_info); + kfree (p_ca_caps); + + mutex_unlock(&dst_ca_mutex); + return result; +} + +static int dst_ca_open(struct inode *inode, struct file *file) +{ + dprintk(verbose, DST_CA_DEBUG, 1, " Device opened [%p] ", file); + try_module_get(THIS_MODULE); + + return 0; +} + +static int dst_ca_release(struct inode *inode, struct file *file) +{ + dprintk(verbose, DST_CA_DEBUG, 1, " Device closed."); + module_put(THIS_MODULE); + + return 0; +} + +static ssize_t dst_ca_read(struct file *file, char __user *buffer, size_t length, loff_t *offset) +{ + ssize_t bytes_read = 0; + + dprintk(verbose, DST_CA_DEBUG, 1, " Device read."); + + return bytes_read; +} + +static ssize_t dst_ca_write(struct file *file, const char __user *buffer, size_t length, loff_t *offset) +{ + dprintk(verbose, DST_CA_DEBUG, 1, " Device write."); + + return 0; +} + +static const struct file_operations dst_ca_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = dst_ca_ioctl, + .open = dst_ca_open, + .release = dst_ca_release, + .read = dst_ca_read, + .write = dst_ca_write, + .llseek = noop_llseek, +}; + +static struct dvb_device dvbdev_ca = { + .priv = NULL, + .users = 1, + .readers = 1, + .writers = 1, + .fops = &dst_ca_fops +}; + +struct dvb_device *dst_ca_attach(struct dst_state *dst, struct dvb_adapter *dvb_adapter) +{ + struct dvb_device *dvbdev; + + dprintk(verbose, DST_CA_ERROR, 1, "registering DST-CA device"); + if (dvb_register_device(dvb_adapter, &dvbdev, &dvbdev_ca, dst, DVB_DEVICE_CA) == 0) { + dst->dst_ca = dvbdev; + return dst->dst_ca; + } + + return NULL; +} + +EXPORT_SYMBOL(dst_ca_attach); + +MODULE_DESCRIPTION("DST DVB-S/T/C Combo CA driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/bt8xx/dst_ca.h b/drivers/media/pci/bt8xx/dst_ca.h new file mode 100644 index 00000000..59cd0ddd --- /dev/null +++ b/drivers/media/pci/bt8xx/dst_ca.h @@ -0,0 +1,58 @@ +/* + CA-driver for TwinHan DST Frontend/Card + + Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _DST_CA_H_ +#define _DST_CA_H_ + +#define RETRIES 5 + + +#define CA_APP_INFO_ENQUIRY 0x9f8020 +#define CA_APP_INFO 0x9f8021 +#define CA_ENTER_MENU 0x9f8022 +#define CA_INFO_ENQUIRY 0x9f8030 +#define CA_INFO 0x9f8031 +#define CA_PMT 0x9f8032 +#define CA_PMT_REPLY 0x9f8033 + +#define CA_CLOSE_MMI 0x9f8800 +#define CA_DISPLAY_CONTROL 0x9f8801 +#define CA_DISPLAY_REPLY 0x9f8802 +#define CA_TEXT_LAST 0x9f8803 +#define CA_TEXT_MORE 0x9f8804 +#define CA_KEYPAD_CONTROL 0x9f8805 +#define CA_KEYPRESS 0x9f8806 + +#define CA_ENQUIRY 0x9f8807 +#define CA_ANSWER 0x9f8808 +#define CA_MENU_LAST 0x9f8809 +#define CA_MENU_MORE 0x9f880a +#define CA_MENU_ANSWER 0x9f880b +#define CA_LIST_LAST 0x9f880c +#define CA_LIST_MORE 0x9f880d + + +struct dst_ca_private { + struct dst_state *dst; + struct dvb_device *dvbdev; +}; + + +#endif diff --git a/drivers/media/pci/bt8xx/dst_common.h b/drivers/media/pci/bt8xx/dst_common.h new file mode 100644 index 00000000..d70d98f1 --- /dev/null +++ b/drivers/media/pci/bt8xx/dst_common.h @@ -0,0 +1,182 @@ +/* + Frontend-driver for TwinHan DST Frontend + + Copyright (C) 2003 Jamie Honan + Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef DST_COMMON_H +#define DST_COMMON_H + +#include +#include +#include +#include "bt878.h" + +#include "dst_ca.h" + + +#define NO_DELAY 0 +#define LONG_DELAY 1 +#define DEVICE_INIT 2 + +#define DELAY 1 + +#define DST_TYPE_IS_SAT 0 +#define DST_TYPE_IS_TERR 1 +#define DST_TYPE_IS_CABLE 2 +#define DST_TYPE_IS_ATSC 3 + +#define DST_TYPE_HAS_TS188 1 +#define DST_TYPE_HAS_TS204 2 +#define DST_TYPE_HAS_SYMDIV 4 +#define DST_TYPE_HAS_FW_1 8 +#define DST_TYPE_HAS_FW_2 16 +#define DST_TYPE_HAS_FW_3 32 +#define DST_TYPE_HAS_FW_BUILD 64 +#define DST_TYPE_HAS_OBS_REGS 128 +#define DST_TYPE_HAS_INC_COUNT 256 +#define DST_TYPE_HAS_MULTI_FE 512 +#define DST_TYPE_HAS_NEWTUNE_2 1024 +#define DST_TYPE_HAS_DBOARD 2048 +#define DST_TYPE_HAS_VLF 4096 + +/* Card capability list */ + +#define DST_TYPE_HAS_MAC 1 +#define DST_TYPE_HAS_DISEQC3 2 +#define DST_TYPE_HAS_DISEQC4 4 +#define DST_TYPE_HAS_DISEQC5 8 +#define DST_TYPE_HAS_MOTO 16 +#define DST_TYPE_HAS_CA 32 +#define DST_TYPE_HAS_ANALOG 64 /* Analog inputs */ +#define DST_TYPE_HAS_SESSION 128 + +#define TUNER_TYPE_MULTI 1 +#define TUNER_TYPE_UNKNOWN 2 +/* DVB-S */ +#define TUNER_TYPE_L64724 4 +#define TUNER_TYPE_STV0299 8 +#define TUNER_TYPE_MB86A15 16 + +/* DVB-T */ +#define TUNER_TYPE_TDA10046 32 + +/* ATSC */ +#define TUNER_TYPE_NXT200x 64 + + +#define RDC_8820_PIO_0_DISABLE 0 +#define RDC_8820_PIO_0_ENABLE 1 +#define RDC_8820_INT 2 +#define RDC_8820_RESET 4 + +/* DST Communication */ +#define GET_REPLY 1 +#define NO_REPLY 0 + +#define GET_ACK 1 +#define FIXED_COMM 8 + +#define ACK 0xff + +struct dst_state { + + struct i2c_adapter* i2c; + + struct bt878* bt; + + /* configuration settings */ + const struct dst_config* config; + + struct dvb_frontend frontend; + + /* private ASIC data */ + u8 tx_tuna[10]; + u8 rx_tuna[10]; + u8 rxbuffer[10]; + u8 diseq_flags; + u8 dst_type; + u32 type_flags; + u32 frequency; /* intermediate frequency in kHz for QPSK */ + fe_spectral_inversion_t inversion; + u32 symbol_rate; /* symbol rate in Symbols per second */ + fe_code_rate_t fec; + fe_sec_voltage_t voltage; + fe_sec_tone_mode_t tone; + u32 decode_freq; + u8 decode_lock; + u16 decode_strength; + u16 decode_snr; + unsigned long cur_jiff; + u8 k22; + u32 bandwidth; + u32 dst_hw_cap; + u8 dst_fw_version; + fe_sec_mini_cmd_t minicmd; + fe_modulation_t modulation; + u8 messages[256]; + u8 mac_address[8]; + u8 fw_version[8]; + u8 card_info[8]; + u8 vendor[8]; + u8 board_info[8]; + u32 tuner_type; + char *tuner_name; + struct mutex dst_mutex; + u8 fw_name[8]; + struct dvb_device *dst_ca; +}; + +struct tuner_types { + u32 tuner_type; + char *tuner_name; + char *board_name; + char *fw_name; +}; + +struct dst_types { + char *device_id; + int offset; + u8 dst_type; + u32 type_flags; + u32 dst_feature; + u32 tuner_type; +}; + +struct dst_config +{ + /* the ASIC i2c address */ + u8 demod_address; +}; + +int rdc_reset_state(struct dst_state *state); + +int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode); +int dst_pio_disable(struct dst_state *state); +int dst_error_recovery(struct dst_state* state); +int dst_error_bailout(struct dst_state *state); +int dst_comm_init(struct dst_state* state); + +int write_dst(struct dst_state *state, u8 * data, u8 len); +int read_dst(struct dst_state *state, u8 * ret, u8 len); +u8 dst_check_sum(u8 * buf, u32 len); +struct dst_state* dst_attach(struct dst_state* state, struct dvb_adapter *dvb_adapter); +struct dvb_device *dst_ca_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter); + + +#endif // DST_COMMON_H diff --git a/drivers/media/pci/bt8xx/dst_priv.h b/drivers/media/pci/bt8xx/dst_priv.h new file mode 100644 index 00000000..3974a4c6 --- /dev/null +++ b/drivers/media/pci/bt8xx/dst_priv.h @@ -0,0 +1,35 @@ +/* + * dst-bt878.h: part of the DST driver for the TwinHan DST Frontend + * + * Copyright (C) 2003 Jamie Honan + */ + +struct dst_gpio_enable { + u32 mask; + u32 enable; +}; + +struct dst_gpio_output { + u32 mask; + u32 highvals; +}; + +struct dst_gpio_read { + unsigned long value; +}; + +union dst_gpio_packet { + struct dst_gpio_enable enb; + struct dst_gpio_output outp; + struct dst_gpio_read rd; + int psize; +}; + +#define DST_IG_ENABLE 0 +#define DST_IG_WRITE 1 +#define DST_IG_READ 2 +#define DST_IG_TS 3 + +struct bt878; + +int bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp); diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c new file mode 100644 index 00000000..d407244f --- /dev/null +++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c @@ -0,0 +1,976 @@ +/* + * Bt8xx based DVB adapter driver + * + * Copyright (C) 2002,2003 Florian Schirmer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#define pr_fmt(fmt) "dvb_bt8xx: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb-bt8xx.h" +#include "bt878.h" + +static int debug; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define dprintk( args... ) \ + do { \ + if (debug) printk(KERN_DEBUG args); \ + } while (0) + +#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ + +static void dvb_bt8xx_task(unsigned long data) +{ + struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *)data; + + //printk("%d ", card->bt->finished_block); + + while (card->bt->last_block != card->bt->finished_block) { + (card->bt->TS_Size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter) + (&card->demux, + &card->bt->buf_cpu[card->bt->last_block * + card->bt->block_bytes], + card->bt->block_bytes); + card->bt->last_block = (card->bt->last_block + 1) % + card->bt->block_count; + } +} + +static int dvb_bt8xx_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux*dvbdmx = dvbdmxfeed->demux; + struct dvb_bt8xx_card *card = dvbdmx->priv; + int rc; + + dprintk("dvb_bt8xx: start_feed\n"); + + if (!dvbdmx->dmx.frontend) + return -EINVAL; + + mutex_lock(&card->lock); + card->nfeeds++; + rc = card->nfeeds; + if (card->nfeeds == 1) + bt878_start(card->bt, card->gpio_mode, + card->op_sync_orin, card->irq_err_ignore); + mutex_unlock(&card->lock); + return rc; +} + +static int dvb_bt8xx_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct dvb_bt8xx_card *card = dvbdmx->priv; + + dprintk("dvb_bt8xx: stop_feed\n"); + + if (!dvbdmx->dmx.frontend) + return -EINVAL; + + mutex_lock(&card->lock); + card->nfeeds--; + if (card->nfeeds == 0) + bt878_stop(card->bt); + mutex_unlock(&card->lock); + + return 0; +} + +static int is_pci_slot_eq(struct pci_dev* adev, struct pci_dev* bdev) +{ + if ((adev->subsystem_vendor == bdev->subsystem_vendor) && + (adev->subsystem_device == bdev->subsystem_device) && + (adev->bus->number == bdev->bus->number) && + (PCI_SLOT(adev->devfn) == PCI_SLOT(bdev->devfn))) + return 1; + return 0; +} + +static struct bt878 *dvb_bt8xx_878_match(unsigned int bttv_nr, + struct pci_dev* bttv_pci_dev) +{ + unsigned int card_nr; + + /* Hmm, n squared. Hope n is small */ + for (card_nr = 0; card_nr < bt878_num; card_nr++) + if (is_pci_slot_eq(bt878[card_nr].dev, bttv_pci_dev)) + return &bt878[card_nr]; + return NULL; +} + +static int thomson_dtt7579_demod_init(struct dvb_frontend* fe) +{ + static u8 mt352_clock_config [] = { 0x89, 0x38, 0x38 }; + static u8 mt352_reset [] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0x20 }; + static u8 mt352_gpp_ctl_cfg [] = { 0x8C, 0x33 }; + static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg)); + mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); + + return 0; +} + +static int thomson_dtt7579_tuner_calc_regs(struct dvb_frontend *fe, u8* pllbuf, int buf_len) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 div; + unsigned char bs = 0; + unsigned char cp = 0; + + if (buf_len < 5) + return -EINVAL; + + div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; + + if (c->frequency < 542000000) + cp = 0xb4; + else if (c->frequency < 771000000) + cp = 0xbc; + else + cp = 0xf4; + + if (c->frequency == 0) + bs = 0x03; + else if (c->frequency < 443250000) + bs = 0x02; + else + bs = 0x08; + + pllbuf[0] = 0x60; + pllbuf[1] = div >> 8; + pllbuf[2] = div & 0xff; + pllbuf[3] = cp; + pllbuf[4] = bs; + + return 5; +} + +static struct mt352_config thomson_dtt7579_config = { + .demod_address = 0x0f, + .demod_init = thomson_dtt7579_demod_init, +}; + +static struct zl10353_config thomson_dtt7579_zl10353_config = { + .demod_address = 0x0f, +}; + +static int cx24108_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 freq = c->frequency; + int i, a, n, pump; + u32 band, pll; + u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000, + 1576000,1718000,1856000,2036000,2150000}; + u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000, + 0x00102000,0x00104000,0x00108000,0x00110000, + 0x00120000,0x00140000}; + + #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */ + dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq); + + /* This is really the bit driving the tuner chip cx24108 */ + + if (freq<950000) + freq = 950000; /* kHz */ + else if (freq>2150000) + freq = 2150000; /* satellite IF is 950..2150MHz */ + + /* decide which VCO to use for the input frequency */ + for(i = 1; (i < ARRAY_SIZE(osci) - 1) && (osci[i] < freq); i++); + dprintk("cx24108 debug: select vco #%d (f=%d)\n", i, freq); + band=bandsel[i]; + /* the gain values must be set by SetSymbolrate */ + /* compute the pll divider needed, from Conexant data sheet, + resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4, + depending on the divider bit. It is set to /4 on the 2 lowest + bands */ + n=((i<=2?2:1)*freq*10L)/(XTAL/100); + a=n%32; n/=32; if(a==0) n--; + pump=(freq<(osci[i-1]+osci[i])/2); + pll=0xf8000000| + ((pump?1:2)<<(14+11))| + ((n&0x1ff)<<(5+11))| + ((a&0x1f)<<11); + /* everything is shifted left 11 bits to left-align the bits in the + 32bit word. Output to the tuner goes MSB-aligned, after all */ + dprintk("cx24108 debug: pump=%d, n=%d, a=%d\n", pump, n, a); + cx24110_pll_write(fe,band); + /* set vga and vca to their widest-band settings, as a precaution. + SetSymbolrate might not be called to set this up */ + cx24110_pll_write(fe,0x500c0000); + cx24110_pll_write(fe,0x83f1f800); + cx24110_pll_write(fe,pll); + //writereg(client,0x56,0x7f); + + return 0; +} + +static int pinnsat_tuner_init(struct dvb_frontend* fe) +{ + struct dvb_bt8xx_card *card = fe->dvb->priv; + + bttv_gpio_enable(card->bttv_nr, 1, 1); /* output */ + bttv_write_gpio(card->bttv_nr, 1, 1); /* relay on */ + + return 0; +} + +static int pinnsat_tuner_sleep(struct dvb_frontend* fe) +{ + struct dvb_bt8xx_card *card = fe->dvb->priv; + + bttv_write_gpio(card->bttv_nr, 1, 0); /* relay off */ + + return 0; +} + +static struct cx24110_config pctvsat_config = { + .demod_address = 0x55, +}; + +static int microtune_mt7202dtf_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv; + u8 cfg, cpump, band_select; + u8 data[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = (36000000 + c->frequency + 83333) / 166666; + cfg = 0x88; + + if (c->frequency < 175000000) + cpump = 2; + else if (c->frequency < 390000000) + cpump = 1; + else if (c->frequency < 470000000) + cpump = 2; + else if (c->frequency < 750000000) + cpump = 2; + else + cpump = 3; + + if (c->frequency < 175000000) + band_select = 0x0e; + else if (c->frequency < 470000000) + band_select = 0x05; + else + band_select = 0x03; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = ((div >> 10) & 0x60) | cfg; + data[3] = (cpump << 6) | band_select; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(card->i2c_adapter, &msg, 1); + return (div * 166666 - 36000000); +} + +static int microtune_mt7202dtf_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +{ + struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv; + + return request_firmware(fw, name, &bt->bt->dev->dev); +} + +static struct sp887x_config microtune_mt7202dtf_config = { + .demod_address = 0x70, + .request_firmware = microtune_mt7202dtf_request_firmware, +}; + +static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) +{ + static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d }; + static u8 mt352_reset [] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF, + 0x00, 0xFF, 0x00, 0x40, 0x40 }; + static u8 mt352_av771_extra[] = { 0xB5, 0x7A }; + static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + + mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg)); + udelay(2000); + mt352_write(fe, mt352_av771_extra,sizeof(mt352_av771_extra)); + mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); + + return 0; +} + +static int advbt771_samsung_tdtc9251dh0_tuner_calc_regs(struct dvb_frontend *fe, u8 *pllbuf, int buf_len) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 div; + unsigned char bs = 0; + unsigned char cp = 0; + + if (buf_len < 5) return -EINVAL; + + div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; + + if (c->frequency < 150000000) + cp = 0xB4; + else if (c->frequency < 173000000) + cp = 0xBC; + else if (c->frequency < 250000000) + cp = 0xB4; + else if (c->frequency < 400000000) + cp = 0xBC; + else if (c->frequency < 420000000) + cp = 0xF4; + else if (c->frequency < 470000000) + cp = 0xFC; + else if (c->frequency < 600000000) + cp = 0xBC; + else if (c->frequency < 730000000) + cp = 0xF4; + else + cp = 0xFC; + + if (c->frequency < 150000000) + bs = 0x01; + else if (c->frequency < 173000000) + bs = 0x01; + else if (c->frequency < 250000000) + bs = 0x02; + else if (c->frequency < 400000000) + bs = 0x02; + else if (c->frequency < 420000000) + bs = 0x02; + else if (c->frequency < 470000000) + bs = 0x02; + else if (c->frequency < 600000000) + bs = 0x08; + else if (c->frequency < 730000000) + bs = 0x08; + else + bs = 0x08; + + pllbuf[0] = 0x61; + pllbuf[1] = div >> 8; + pllbuf[2] = div & 0xff; + pllbuf[3] = cp; + pllbuf[4] = bs; + + return 5; +} + +static struct mt352_config advbt771_samsung_tdtc9251dh0_config = { + .demod_address = 0x0f, + .demod_init = advbt771_samsung_tdtc9251dh0_demod_init, +}; + +static struct dst_config dst_config = { + .demod_address = 0x55, +}; + +static int or51211_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +{ + struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv; + + return request_firmware(fw, name, &bt->bt->dev->dev); +} + +static void or51211_setmode(struct dvb_frontend * fe, int mode) +{ + struct dvb_bt8xx_card *bt = fe->dvb->priv; + bttv_write_gpio(bt->bttv_nr, 0x0002, mode); /* Reset */ + msleep(20); +} + +static void or51211_reset(struct dvb_frontend * fe) +{ + struct dvb_bt8xx_card *bt = fe->dvb->priv; + + /* RESET DEVICE + * reset is controlled by GPIO-0 + * when set to 0 causes reset and when to 1 for normal op + * must remain reset for 128 clock cycles on a 50Mhz clock + * also PRM1 PRM2 & PRM4 are controlled by GPIO-1,GPIO-2 & GPIO-4 + * We assume that the reset has be held low long enough or we + * have been reset by a power on. When the driver is unloaded + * reset set to 0 so if reloaded we have been reset. + */ + /* reset & PRM1,2&4 are outputs */ + int ret = bttv_gpio_enable(bt->bttv_nr, 0x001F, 0x001F); + if (ret != 0) + printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR (%i)\n", ret); + bttv_write_gpio(bt->bttv_nr, 0x001F, 0x0000); /* Reset */ + msleep(20); + /* Now set for normal operation */ + bttv_write_gpio(bt->bttv_nr, 0x0001F, 0x0001); + /* wait for operation to begin */ + msleep(500); +} + +static void or51211_sleep(struct dvb_frontend * fe) +{ + struct dvb_bt8xx_card *bt = fe->dvb->priv; + bttv_write_gpio(bt->bttv_nr, 0x0001, 0x0000); +} + +static struct or51211_config or51211_config = { + .demod_address = 0x15, + .request_firmware = or51211_request_firmware, + .setmode = or51211_setmode, + .reset = or51211_reset, + .sleep = or51211_sleep, +}; + +static int vp3021_alps_tded4_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv; + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf) }; + + div = (c->frequency + 36166667) / 166667; + + buf[0] = (div >> 8) & 0x7F; + buf[1] = div & 0xFF; + buf[2] = 0x85; + if ((c->frequency >= 47000000) && (c->frequency < 153000000)) + buf[3] = 0x01; + else if ((c->frequency >= 153000000) && (c->frequency < 430000000)) + buf[3] = 0x02; + else if ((c->frequency >= 430000000) && (c->frequency < 824000000)) + buf[3] = 0x0C; + else if ((c->frequency >= 824000000) && (c->frequency < 863000000)) + buf[3] = 0x8C; + else + return -EINVAL; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(card->i2c_adapter, &msg, 1); + return 0; +} + +static struct nxt6000_config vp3021_alps_tded4_config = { + .demod_address = 0x0a, + .clock_inversion = 1, +}; + +static int digitv_alps_tded4_demod_init(struct dvb_frontend* fe) +{ + static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d }; + static u8 mt352_reset [] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg [] = { 0x67, 0x20, 0xa0 }; + static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg)); + mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); + + return 0; +} + +static int digitv_alps_tded4_tuner_calc_regs(struct dvb_frontend *fe, u8 *pllbuf, int buf_len) +{ + u32 div; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + if (buf_len < 5) + return -EINVAL; + + div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; + + pllbuf[0] = 0x61; + pllbuf[1] = (div >> 8) & 0x7F; + pllbuf[2] = div & 0xFF; + pllbuf[3] = 0x85; + + dprintk("frequency %u, div %u\n", c->frequency, div); + + if (c->frequency < 470000000) + pllbuf[4] = 0x02; + else if (c->frequency > 823000000) + pllbuf[4] = 0x88; + else + pllbuf[4] = 0x08; + + if (c->bandwidth_hz == 8000000) + pllbuf[4] |= 0x04; + + return 5; +} + +static void digitv_alps_tded4_reset(struct dvb_bt8xx_card *bt) +{ + /* + * Reset the frontend, must be called before trying + * to initialise the MT352 or mt352_attach + * will fail. Same goes for the nxt6000 frontend. + * + */ + + int ret = bttv_gpio_enable(bt->bttv_nr, 0x08, 0x08); + if (ret != 0) + printk(KERN_WARNING "digitv_alps_tded4: Init Error - Can't Reset DVR (%i)\n", ret); + + /* Pulse the reset line */ + bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */ + bttv_write_gpio(bt->bttv_nr, 0x08, 0x00); /* Low */ + msleep(100); + + bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */ +} + +static struct mt352_config digitv_alps_tded4_config = { + .demod_address = 0x0a, + .demod_init = digitv_alps_tded4_demod_init, +}; + +static struct lgdt330x_config tdvs_tua6034_config = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ +}; + +static void lgdt330x_reset(struct dvb_bt8xx_card *bt) +{ + /* Set pin 27 of the lgdt3303 chip high to reset the frontend */ + + /* Pulse the reset line */ + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */ + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */ + msleep(100); + + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */ + msleep(100); +} + +static void frontend_init(struct dvb_bt8xx_card *card, u32 type) +{ + struct dst_state* state = NULL; + + switch(type) { + case BTTV_BOARD_DVICO_DVBT_LITE: + card->fe = dvb_attach(mt352_attach, &thomson_dtt7579_config, card->i2c_adapter); + + if (card->fe == NULL) + card->fe = dvb_attach(zl10353_attach, &thomson_dtt7579_zl10353_config, + card->i2c_adapter); + + if (card->fe != NULL) { + card->fe->ops.tuner_ops.calc_regs = thomson_dtt7579_tuner_calc_regs; + card->fe->ops.info.frequency_min = 174000000; + card->fe->ops.info.frequency_max = 862000000; + } + break; + + case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE: + lgdt330x_reset(card); + card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config, card->i2c_adapter); + if (card->fe != NULL) { + dvb_attach(simple_tuner_attach, card->fe, + card->i2c_adapter, 0x61, + TUNER_LG_TDVS_H06XF); + dprintk ("dvb_bt8xx: lgdt330x detected\n"); + } + break; + + case BTTV_BOARD_NEBULA_DIGITV: + /* + * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK); + * this would be a cleaner solution than trying each frontend in turn. + */ + + /* Old Nebula (marked (c)2003 on high profile pci card) has nxt6000 demod */ + digitv_alps_tded4_reset(card); + card->fe = dvb_attach(nxt6000_attach, &vp3021_alps_tded4_config, card->i2c_adapter); + if (card->fe != NULL) { + card->fe->ops.tuner_ops.set_params = vp3021_alps_tded4_tuner_set_params; + dprintk ("dvb_bt8xx: an nxt6000 was detected on your digitv card\n"); + break; + } + + /* New Nebula (marked (c)2005 on low profile pci card) has mt352 demod */ + digitv_alps_tded4_reset(card); + card->fe = dvb_attach(mt352_attach, &digitv_alps_tded4_config, card->i2c_adapter); + + if (card->fe != NULL) { + card->fe->ops.tuner_ops.calc_regs = digitv_alps_tded4_tuner_calc_regs; + dprintk ("dvb_bt8xx: an mt352 was detected on your digitv card\n"); + } + break; + + case BTTV_BOARD_AVDVBT_761: + card->fe = dvb_attach(sp887x_attach, µtune_mt7202dtf_config, card->i2c_adapter); + if (card->fe) { + card->fe->ops.tuner_ops.set_params = microtune_mt7202dtf_tuner_set_params; + } + break; + + case BTTV_BOARD_AVDVBT_771: + card->fe = dvb_attach(mt352_attach, &advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter); + if (card->fe != NULL) { + card->fe->ops.tuner_ops.calc_regs = advbt771_samsung_tdtc9251dh0_tuner_calc_regs; + card->fe->ops.info.frequency_min = 174000000; + card->fe->ops.info.frequency_max = 862000000; + } + break; + + case BTTV_BOARD_TWINHAN_DST: + /* DST is not a frontend driver !!! */ + state = kmalloc(sizeof (struct dst_state), GFP_KERNEL); + if (!state) { + pr_err("No memory\n"); + break; + } + /* Setup the Card */ + state->config = &dst_config; + state->i2c = card->i2c_adapter; + state->bt = card->bt; + state->dst_ca = NULL; + /* DST is not a frontend, attaching the ASIC */ + if (dvb_attach(dst_attach, state, &card->dvb_adapter) == NULL) { + pr_err("%s: Could not find a Twinhan DST\n", __func__); + break; + } + /* Attach other DST peripherals if any */ + /* Conditional Access device */ + card->fe = &state->frontend; + if (state->dst_hw_cap & DST_TYPE_HAS_CA) + dvb_attach(dst_ca_attach, state, &card->dvb_adapter); + break; + + case BTTV_BOARD_PINNACLESAT: + card->fe = dvb_attach(cx24110_attach, &pctvsat_config, card->i2c_adapter); + if (card->fe) { + card->fe->ops.tuner_ops.init = pinnsat_tuner_init; + card->fe->ops.tuner_ops.sleep = pinnsat_tuner_sleep; + card->fe->ops.tuner_ops.set_params = cx24108_tuner_set_params; + } + break; + + case BTTV_BOARD_PC_HDTV: + card->fe = dvb_attach(or51211_attach, &or51211_config, card->i2c_adapter); + if (card->fe != NULL) + dvb_attach(simple_tuner_attach, card->fe, + card->i2c_adapter, 0x61, + TUNER_PHILIPS_FCV1236D); + break; + } + + if (card->fe == NULL) + pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + card->bt->dev->vendor, + card->bt->dev->device, + card->bt->dev->subsystem_vendor, + card->bt->dev->subsystem_device); + else + if (dvb_register_frontend(&card->dvb_adapter, card->fe)) { + pr_err("Frontend registration failed!\n"); + dvb_frontend_detach(card->fe); + card->fe = NULL; + } +} + +static int dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) +{ + int result; + + result = dvb_register_adapter(&card->dvb_adapter, card->card_name, + THIS_MODULE, &card->bt->dev->dev, + adapter_nr); + if (result < 0) { + pr_err("dvb_register_adapter failed (errno = %d)\n", result); + return result; + } + card->dvb_adapter.priv = card; + + card->bt->adapter = card->i2c_adapter; + + memset(&card->demux, 0, sizeof(struct dvb_demux)); + + card->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING; + + card->demux.priv = card; + card->demux.filternum = 256; + card->demux.feednum = 256; + card->demux.start_feed = dvb_bt8xx_start_feed; + card->demux.stop_feed = dvb_bt8xx_stop_feed; + card->demux.write_to_decoder = NULL; + + result = dvb_dmx_init(&card->demux); + if (result < 0) { + pr_err("dvb_dmx_init failed (errno = %d)\n", result); + goto err_unregister_adaptor; + } + + card->dmxdev.filternum = 256; + card->dmxdev.demux = &card->demux.dmx; + card->dmxdev.capabilities = 0; + + result = dvb_dmxdev_init(&card->dmxdev, &card->dvb_adapter); + if (result < 0) { + pr_err("dvb_dmxdev_init failed (errno = %d)\n", result); + goto err_dmx_release; + } + + card->fe_hw.source = DMX_FRONTEND_0; + + result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_hw); + if (result < 0) { + pr_err("dvb_dmx_init failed (errno = %d)\n", result); + goto err_dmxdev_release; + } + + card->fe_mem.source = DMX_MEMORY_FE; + + result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_mem); + if (result < 0) { + pr_err("dvb_dmx_init failed (errno = %d)\n", result); + goto err_remove_hw_frontend; + } + + result = card->demux.dmx.connect_frontend(&card->demux.dmx, &card->fe_hw); + if (result < 0) { + pr_err("dvb_dmx_init failed (errno = %d)\n", result); + goto err_remove_mem_frontend; + } + + result = dvb_net_init(&card->dvb_adapter, &card->dvbnet, &card->demux.dmx); + if (result < 0) { + pr_err("dvb_net_init failed (errno = %d)\n", result); + goto err_disconnect_frontend; + } + + tasklet_init(&card->bt->tasklet, dvb_bt8xx_task, (unsigned long) card); + + frontend_init(card, type); + + return 0; + +err_disconnect_frontend: + card->demux.dmx.disconnect_frontend(&card->demux.dmx); +err_remove_mem_frontend: + card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem); +err_remove_hw_frontend: + card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw); +err_dmxdev_release: + dvb_dmxdev_release(&card->dmxdev); +err_dmx_release: + dvb_dmx_release(&card->demux); +err_unregister_adaptor: + dvb_unregister_adapter(&card->dvb_adapter); + return result; +} + +static int dvb_bt8xx_probe(struct bttv_sub_device *sub) +{ + struct dvb_bt8xx_card *card; + struct pci_dev* bttv_pci_dev; + int ret; + + if (!(card = kzalloc(sizeof(struct dvb_bt8xx_card), GFP_KERNEL))) + return -ENOMEM; + + mutex_init(&card->lock); + card->bttv_nr = sub->core->nr; + strlcpy(card->card_name, sub->core->v4l2_dev.name, sizeof(card->card_name)); + card->i2c_adapter = &sub->core->i2c_adap; + + switch(sub->core->type) { + case BTTV_BOARD_PINNACLESAT: + card->gpio_mode = 0x0400c060; + /* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR, + BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */ + card->op_sync_orin = BT878_RISC_SYNC_MASK; + card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR; + break; + + case BTTV_BOARD_DVICO_DVBT_LITE: + card->gpio_mode = 0x0400C060; + card->op_sync_orin = BT878_RISC_SYNC_MASK; + card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR; + /* 26, 15, 14, 6, 5 + * A_PWRDN DA_DPM DA_SBR DA_IOM_DA + * DA_APP(parallel) */ + break; + + case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE: + card->gpio_mode = 0x0400c060; + card->op_sync_orin = BT878_RISC_SYNC_MASK; + card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR; + break; + + case BTTV_BOARD_NEBULA_DIGITV: + case BTTV_BOARD_AVDVBT_761: + card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5); + card->op_sync_orin = BT878_RISC_SYNC_MASK; + card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR; + /* A_PWRDN DA_SBR DA_APP (high speed serial) */ + break; + + case BTTV_BOARD_AVDVBT_771: //case 0x07711461: + card->gpio_mode = 0x0400402B; + card->op_sync_orin = BT878_RISC_SYNC_MASK; + card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR; + /* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/ + break; + + case BTTV_BOARD_TWINHAN_DST: + card->gpio_mode = 0x2204f2c; + card->op_sync_orin = BT878_RISC_SYNC_MASK; + card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR | + BT878_APPERR | BT878_AFBUS; + /* 25,21,14,11,10,9,8,3,2 then + * 0x33 = 5,4,1,0 + * A_SEL=SML, DA_MLB, DA_SBR, + * DA_SDR=f, fifo trigger = 32 DWORDS + * IOM = 0 == audio A/D + * DPM = 0 == digital audio mode + * == async data parallel port + * then 0x33 (13 is set by start_capture) + * DA_APP = async data parallel port, + * ACAP_EN = 1, + * RISC+FIFO ENABLE */ + break; + + case BTTV_BOARD_PC_HDTV: + card->gpio_mode = 0x0100EC7B; + card->op_sync_orin = BT878_RISC_SYNC_MASK; + card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR; + break; + + default: + pr_err("Unknown bttv card type: %d\n", sub->core->type); + kfree(card); + return -ENODEV; + } + + dprintk("dvb_bt8xx: identified card%d as %s\n", card->bttv_nr, card->card_name); + + if (!(bttv_pci_dev = bttv_get_pcidev(card->bttv_nr))) { + pr_err("no pci device for card %d\n", card->bttv_nr); + kfree(card); + return -ENODEV; + } + + if (!(card->bt = dvb_bt8xx_878_match(card->bttv_nr, bttv_pci_dev))) { + pr_err("unable to determine DMA core of card %d,\n", card->bttv_nr); + pr_err("if you have the ALSA bt87x audio driver installed, try removing it.\n"); + + kfree(card); + return -ENODEV; + } + + mutex_init(&card->bt->gpio_lock); + card->bt->bttv_nr = sub->core->nr; + + if ( (ret = dvb_bt8xx_load_card(card, sub->core->type)) ) { + kfree(card); + return ret; + } + + dev_set_drvdata(&sub->dev, card); + return 0; +} + +static void dvb_bt8xx_remove(struct bttv_sub_device *sub) +{ + struct dvb_bt8xx_card *card = dev_get_drvdata(&sub->dev); + + dprintk("dvb_bt8xx: unloading card%d\n", card->bttv_nr); + + bt878_stop(card->bt); + tasklet_kill(&card->bt->tasklet); + dvb_net_release(&card->dvbnet); + card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem); + card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw); + dvb_dmxdev_release(&card->dmxdev); + dvb_dmx_release(&card->demux); + if (card->fe) { + dvb_unregister_frontend(card->fe); + dvb_frontend_detach(card->fe); + } + dvb_unregister_adapter(&card->dvb_adapter); + + kfree(card); +} + +static struct bttv_sub_driver driver = { + .drv = { + .name = "dvb-bt8xx", + }, + .probe = dvb_bt8xx_probe, + .remove = dvb_bt8xx_remove, + /* FIXME: + * .shutdown = dvb_bt8xx_shutdown, + * .suspend = dvb_bt8xx_suspend, + * .resume = dvb_bt8xx_resume, + */ +}; + +static int __init dvb_bt8xx_init(void) +{ + return bttv_sub_register(&driver, "dvb"); +} + +static void __exit dvb_bt8xx_exit(void) +{ + bttv_sub_unregister(&driver); +} + +module_init(dvb_bt8xx_init); +module_exit(dvb_bt8xx_exit); + +MODULE_DESCRIPTION("Bt8xx based DVB adapter driver"); +MODULE_AUTHOR("Florian Schirmer "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.h b/drivers/media/pci/bt8xx/dvb-bt8xx.h new file mode 100644 index 00000000..4499ed2a --- /dev/null +++ b/drivers/media/pci/bt8xx/dvb-bt8xx.h @@ -0,0 +1,63 @@ +/* + * Bt8xx based DVB adapter driver + * + * Copyright (C) 2002,2003 Florian Schirmer + * Copyright (C) 2002 Peter Hettkamp + * Copyright (C) 1999-2001 Ralph Metzler & Marcus Metzler for convergence integrated media GmbH + * Copyright (C) 1998,1999 Christian Theiss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef DVB_BT8XX_H +#define DVB_BT8XX_H + +#include +#include +#include "dvbdev.h" +#include "dvb_net.h" +#include "bttv.h" +#include "mt352.h" +#include "sp887x.h" +#include "dst_common.h" +#include "nxt6000.h" +#include "cx24110.h" +#include "or51211.h" +#include "lgdt330x.h" +#include "zl10353.h" +#include "tuner-simple.h" + +struct dvb_bt8xx_card { + struct mutex lock; + int nfeeds; + char card_name[32]; + struct dvb_adapter dvb_adapter; + struct bt878 *bt; + unsigned int bttv_nr; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + u32 gpio_mode; + u32 op_sync_orin; + u32 irq_err_ignore; + struct i2c_adapter *i2c_adapter; + struct dvb_net dvbnet; + + struct dvb_frontend* fe; +}; + +#endif /* DVB_BT8XX_H */ diff --git a/drivers/media/pci/cx18/Kconfig b/drivers/media/pci/cx18/Kconfig new file mode 100644 index 00000000..c675b83c --- /dev/null +++ b/drivers/media/pci/cx18/Kconfig @@ -0,0 +1,35 @@ +config VIDEO_CX18 + tristate "Conexant cx23418 MPEG encoder support" + depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C + select I2C_ALGOBIT + select VIDEOBUF_VMALLOC + depends on RC_CORE + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_CX2341X + select VIDEO_CS5345 + select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This is a video4linux driver for Conexant cx23418 based + PCI combo video recorder devices. + + This is used in devices such as the Hauppauge HVR-1600 + cards. + + To compile this driver as a module, choose M here: the + module will be called cx18. + +config VIDEO_CX18_ALSA + tristate "Conexant 23418 DMA audio support" + depends on VIDEO_CX18 && SND + select SND_PCM + ---help--- + This is a video4linux driver for direct (DMA) audio on + Conexant 23418 based TV cards using ALSA. + + To compile this driver as a module, choose M here: the + module will be called cx18-alsa. diff --git a/drivers/media/pci/cx18/Makefile b/drivers/media/pci/cx18/Makefile new file mode 100644 index 00000000..d3ff1545 --- /dev/null +++ b/drivers/media/pci/cx18/Makefile @@ -0,0 +1,13 @@ +cx18-objs := cx18-driver.o cx18-cards.o cx18-i2c.o cx18-firmware.o cx18-gpio.o \ + cx18-queue.o cx18-streams.o cx18-fileops.o cx18-ioctl.o cx18-controls.o \ + cx18-mailbox.o cx18-vbi.o cx18-audio.o cx18-video.o cx18-irq.o \ + cx18-av-core.o cx18-av-audio.o cx18-av-firmware.o cx18-av-vbi.o cx18-scb.o \ + cx18-dvb.o cx18-io.o +cx18-alsa-objs := cx18-alsa-main.o cx18-alsa-pcm.o + +obj-$(CONFIG_VIDEO_CX18) += cx18.o +obj-$(CONFIG_VIDEO_CX18_ALSA) += cx18-alsa.o + +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends +ccflags-y += -Idrivers/media/tuners diff --git a/drivers/media/pci/cx18/cx18-alsa-main.c b/drivers/media/pci/cx18/cx18-alsa-main.c new file mode 100644 index 00000000..b2c8c343 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-alsa-main.c @@ -0,0 +1,295 @@ +/* + * ALSA interface to cx18 PCM capture streams + * + * Copyright (C) 2009 Andy Walls + * Copyright (C) 2009 Devin Heitmueller + * + * Portions of this work were sponsored by ONELAN Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "cx18-driver.h" +#include "cx18-version.h" +#include "cx18-alsa.h" +#include "cx18-alsa-mixer.h" +#include "cx18-alsa-pcm.h" + +int cx18_alsa_debug; + +#define CX18_DEBUG_ALSA_INFO(fmt, arg...) \ + do { \ + if (cx18_alsa_debug & 2) \ + printk(KERN_INFO "%s: " fmt, "cx18-alsa", ## arg); \ + } while (0); + +module_param_named(debug, cx18_alsa_debug, int, 0644); +MODULE_PARM_DESC(debug, + "Debug level (bitmask). Default: 0\n" + "\t\t\t 1/0x0001: warning\n" + "\t\t\t 2/0x0002: info\n"); + +MODULE_AUTHOR("Andy Walls"); +MODULE_DESCRIPTION("CX23418 ALSA Interface"); +MODULE_SUPPORTED_DEVICE("CX23418 MPEG2 encoder"); +MODULE_LICENSE("GPL"); + +MODULE_VERSION(CX18_VERSION); + +static inline +struct snd_cx18_card *to_snd_cx18_card(struct v4l2_device *v4l2_dev) +{ + return to_cx18(v4l2_dev)->alsa; +} + +static inline +struct snd_cx18_card *p_to_snd_cx18_card(struct v4l2_device **v4l2_dev) +{ + return container_of(v4l2_dev, struct snd_cx18_card, v4l2_dev); +} + +static void snd_cx18_card_free(struct snd_cx18_card *cxsc) +{ + if (cxsc == NULL) + return; + + if (cxsc->v4l2_dev != NULL) + to_cx18(cxsc->v4l2_dev)->alsa = NULL; + + /* FIXME - take any other stopping actions needed */ + + kfree(cxsc); +} + +static void snd_cx18_card_private_free(struct snd_card *sc) +{ + if (sc == NULL) + return; + snd_cx18_card_free(sc->private_data); + sc->private_data = NULL; + sc->private_free = NULL; +} + +static int snd_cx18_card_create(struct v4l2_device *v4l2_dev, + struct snd_card *sc, + struct snd_cx18_card **cxsc) +{ + *cxsc = kzalloc(sizeof(struct snd_cx18_card), GFP_KERNEL); + if (*cxsc == NULL) + return -ENOMEM; + + (*cxsc)->v4l2_dev = v4l2_dev; + (*cxsc)->sc = sc; + + sc->private_data = *cxsc; + sc->private_free = snd_cx18_card_private_free; + + return 0; +} + +static int snd_cx18_card_set_names(struct snd_cx18_card *cxsc) +{ + struct cx18 *cx = to_cx18(cxsc->v4l2_dev); + struct snd_card *sc = cxsc->sc; + + /* sc->driver is used by alsa-lib's configurator: simple, unique */ + strlcpy(sc->driver, "CX23418", sizeof(sc->driver)); + + /* sc->shortname is a symlink in /proc/asound: CX18-M -> cardN */ + snprintf(sc->shortname, sizeof(sc->shortname), "CX18-%d", + cx->instance); + + /* sc->longname is read from /proc/asound/cards */ + snprintf(sc->longname, sizeof(sc->longname), + "CX23418 #%d %s TV/FM Radio/Line-In Capture", + cx->instance, cx->card_name); + + return 0; +} + +static int snd_cx18_init(struct v4l2_device *v4l2_dev) +{ + struct cx18 *cx = to_cx18(v4l2_dev); + struct snd_card *sc = NULL; + struct snd_cx18_card *cxsc; + int ret; + + /* Numbrs steps from "Writing an ALSA Driver" by Takashi Iwai */ + + /* (1) Check and increment the device index */ + /* This is a no-op for us. We'll use the cx->instance */ + + /* (2) Create a card instance */ + ret = snd_card_create(SNDRV_DEFAULT_IDX1, /* use first available id */ + SNDRV_DEFAULT_STR1, /* xid from end of shortname*/ + THIS_MODULE, 0, &sc); + if (ret) { + CX18_ALSA_ERR("%s: snd_card_create() failed with err %d\n", + __func__, ret); + goto err_exit; + } + + /* (3) Create a main component */ + ret = snd_cx18_card_create(v4l2_dev, sc, &cxsc); + if (ret) { + CX18_ALSA_ERR("%s: snd_cx18_card_create() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + + /* (4) Set the driver ID and name strings */ + snd_cx18_card_set_names(cxsc); + + + ret = snd_cx18_pcm_create(cxsc); + if (ret) { + CX18_ALSA_ERR("%s: snd_cx18_pcm_create() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + /* FIXME - proc files */ + + /* (7) Set the driver data and return 0 */ + /* We do this out of normal order for PCI drivers to avoid races */ + cx->alsa = cxsc; + + /* (6) Register the card instance */ + ret = snd_card_register(sc); + if (ret) { + cx->alsa = NULL; + CX18_ALSA_ERR("%s: snd_card_register() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + + return 0; + +err_exit_free: + if (sc != NULL) + snd_card_free(sc); + kfree(cxsc); +err_exit: + return ret; +} + +static int cx18_alsa_load(struct cx18 *cx) +{ + struct v4l2_device *v4l2_dev = &cx->v4l2_dev; + struct cx18_stream *s; + + if (v4l2_dev == NULL) { + printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n", + __func__); + return 0; + } + + cx = to_cx18(v4l2_dev); + if (cx == NULL) { + printk(KERN_ERR "cx18-alsa cx is NULL\n"); + return 0; + } + + s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM]; + if (s->video_dev == NULL) { + CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - " + "skipping\n", __func__); + return 0; + } + + if (cx->alsa != NULL) { + CX18_ALSA_ERR("%s: struct snd_cx18_card * already exists\n", + __func__); + return 0; + } + + if (snd_cx18_init(v4l2_dev)) { + CX18_ALSA_ERR("%s: failed to create struct snd_cx18_card\n", + __func__); + } else { + CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance " + "\n", __func__); + } + return 0; +} + +static int __init cx18_alsa_init(void) +{ + printk(KERN_INFO "cx18-alsa: module loading...\n"); + cx18_ext_init = &cx18_alsa_load; + return 0; +} + +static void __exit snd_cx18_exit(struct snd_cx18_card *cxsc) +{ + struct cx18 *cx = to_cx18(cxsc->v4l2_dev); + + /* FIXME - pointer checks & shutdown cxsc */ + + snd_card_free(cxsc->sc); + cx->alsa = NULL; +} + +static int __exit cx18_alsa_exit_callback(struct device *dev, void *data) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + struct snd_cx18_card *cxsc; + + if (v4l2_dev == NULL) { + printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n", + __func__); + return 0; + } + + cxsc = to_snd_cx18_card(v4l2_dev); + if (cxsc == NULL) { + CX18_ALSA_WARN("%s: struct snd_cx18_card * is NULL\n", + __func__); + return 0; + } + + snd_cx18_exit(cxsc); + return 0; +} + +static void __exit cx18_alsa_exit(void) +{ + struct device_driver *drv; + int ret; + + printk(KERN_INFO "cx18-alsa: module unloading...\n"); + + drv = driver_find("cx18", &pci_bus_type); + ret = driver_for_each_device(drv, NULL, NULL, cx18_alsa_exit_callback); + (void)ret; /* suppress compiler warning */ + + cx18_ext_init = NULL; + printk(KERN_INFO "cx18-alsa: module unload complete\n"); +} + +module_init(cx18_alsa_init); +module_exit(cx18_alsa_exit); diff --git a/drivers/media/pci/cx18/cx18-alsa-mixer.c b/drivers/media/pci/cx18/cx18-alsa-mixer.c new file mode 100644 index 00000000..341bddc0 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-alsa-mixer.c @@ -0,0 +1,175 @@ +/* + * ALSA mixer controls for the + * ALSA interface to cx18 PCM capture streams + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include "cx18-alsa.h" +#include "cx18-driver.h" + +/* + * Note the cx18-av-core volume scale is funny, due to the alignment of the + * scale with another chip's range: + * + * v4l2_control value /512 indicated dB actual dB reg 0x8d4 + * 0x0000 - 0x01ff 0 -119 -96 228 + * 0x0200 - 0x02ff 1 -118 -96 228 + * ... + * 0x2c00 - 0x2dff 22 -97 -96 228 + * 0x2e00 - 0x2fff 23 -96 -96 228 + * 0x3000 - 0x31ff 24 -95 -95 226 + * ... + * 0xee00 - 0xefff 119 0 0 36 + * ... + * 0xfe00 - 0xffff 127 +8 +8 20 + */ +static inline int dB_to_cx18_av_vol(int dB) +{ + if (dB < -96) + dB = -96; + else if (dB > 8) + dB = 8; + return (dB + 119) << 9; +} + +static inline int cx18_av_vol_to_dB(int v) +{ + if (v < (23 << 9)) + v = (23 << 9); + else if (v > (127 << 9)) + v = (127 << 9); + return (v >> 9) - 119; +} + +static int snd_cx18_mixer_tv_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + /* We're already translating values, just keep this control in dB */ + uinfo->value.integer.min = -96; + uinfo->value.integer.max = 8; + uinfo->value.integer.step = 1; + return 0; +} + +static int snd_cx18_mixer_tv_vol_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *uctl) +{ + struct snd_cx18_card *cxsc = snd_kcontrol_chip(kctl); + struct cx18 *cx = to_cx18(cxsc->v4l2_dev); + struct v4l2_control vctrl; + int ret; + + vctrl.id = V4L2_CID_AUDIO_VOLUME; + vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]); + + snd_cx18_lock(cxsc); + ret = v4l2_subdev_call(cx->sd_av, core, g_ctrl, &vctrl); + snd_cx18_unlock(cxsc); + + if (!ret) + uctl->value.integer.value[0] = cx18_av_vol_to_dB(vctrl.value); + return ret; +} + +static int snd_cx18_mixer_tv_vol_put(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *uctl) +{ + struct snd_cx18_card *cxsc = snd_kcontrol_chip(kctl); + struct cx18 *cx = to_cx18(cxsc->v4l2_dev); + struct v4l2_control vctrl; + int ret; + + vctrl.id = V4L2_CID_AUDIO_VOLUME; + vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]); + + snd_cx18_lock(cxsc); + + /* Fetch current state */ + ret = v4l2_subdev_call(cx->sd_av, core, g_ctrl, &vctrl); + + if (ret || + (cx18_av_vol_to_dB(vctrl.value) != uctl->value.integer.value[0])) { + + /* Set, if needed */ + vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]); + ret = v4l2_subdev_call(cx->sd_av, core, s_ctrl, &vctrl); + if (!ret) + ret = 1; /* Indicate control was changed w/o error */ + } + snd_cx18_unlock(cxsc); + + return ret; +} + + +/* This is a bit of overkill, the slider is already in dB internally */ +static DECLARE_TLV_DB_SCALE(snd_cx18_mixer_tv_vol_db_scale, -9600, 100, 0); + +static struct snd_kcontrol_new snd_cx18_mixer_tv_vol __initdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog TV Capture Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = snd_cx18_mixer_tv_volume_info, + .get = snd_cx18_mixer_tv_volume_get, + .put = snd_cx18_mixer_tv_volume_put, + .tlv.p = snd_cx18_mixer_tv_vol_db_scale +}; + +/* FIXME - add mute switch and balance, bass, treble sliders: + V4L2_CID_AUDIO_MUTE + + V4L2_CID_AUDIO_BALANCE + + V4L2_CID_AUDIO_BASS + V4L2_CID_AUDIO_TREBLE +*/ + +/* FIXME - add stereo, lang1, lang2, mono menu */ +/* FIXME - add CS5345 I2S volume for HVR-1600 */ + +int __init snd_cx18_mixer_create(struct snd_cx18_card *cxsc) +{ + struct v4l2_device *v4l2_dev = cxsc->v4l2_dev; + struct snd_card *sc = cxsc->sc; + int ret; + + strlcpy(sc->mixername, "CX23418 Mixer", sizeof(sc->mixername)); + + ret = snd_ctl_add(sc, snd_ctl_new1(snd_cx18_mixer_tv_vol, cxsc)); + if (ret) { + CX18_ALSA_WARN("%s: failed to add %s control, err %d\n", + __func__, snd_cx18_mixer_tv_vol.name, ret); + } + return ret; +} diff --git a/drivers/media/pci/cx18/cx18-alsa-mixer.h b/drivers/media/pci/cx18/cx18-alsa-mixer.h new file mode 100644 index 00000000..ec923879 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-alsa-mixer.h @@ -0,0 +1,23 @@ +/* + * ALSA mixer controls for the + * ALSA interface to cx18 PCM capture streams + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int __init snd_cx18_mixer_create(struct snd_cx18_card *cxsc); diff --git a/drivers/media/pci/cx18/cx18-alsa-pcm.c b/drivers/media/pci/cx18/cx18-alsa-pcm.c new file mode 100644 index 00000000..180077c4 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-alsa-pcm.c @@ -0,0 +1,357 @@ +/* + * ALSA PCM device for the + * ALSA interface to cx18 PCM capture streams + * + * Copyright (C) 2009 Andy Walls + * Copyright (C) 2009 Devin Heitmueller + * + * Portions of this work were sponsored by ONELAN Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include + +#include + +#include +#include + +#include "cx18-driver.h" +#include "cx18-queue.h" +#include "cx18-streams.h" +#include "cx18-fileops.h" +#include "cx18-alsa.h" +#include "cx18-alsa-pcm.h" + +static unsigned int pcm_debug; +module_param(pcm_debug, int, 0644); +MODULE_PARM_DESC(pcm_debug, "enable debug messages for pcm"); + +#define dprintk(fmt, arg...) do { \ + if (pcm_debug) \ + printk(KERN_INFO "cx18-alsa-pcm %s: " fmt, \ + __func__, ##arg); \ + } while (0) + +static struct snd_pcm_hardware snd_cx18_hw_capture = { + .info = SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP_VALID, + + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_48000, + + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */ + .period_bytes_min = 64, /* 12544/2, */ + .period_bytes_max = 12544, + .periods_min = 2, + .periods_max = 98, /* 12544, */ +}; + +void cx18_alsa_announce_pcm_data(struct snd_cx18_card *cxsc, u8 *pcm_data, + size_t num_bytes) +{ + struct snd_pcm_substream *substream; + struct snd_pcm_runtime *runtime; + unsigned int oldptr; + unsigned int stride; + int period_elapsed = 0; + int length; + + dprintk("cx18 alsa announce ptr=%p data=%p num_bytes=%zd\n", cxsc, + pcm_data, num_bytes); + + substream = cxsc->capture_pcm_substream; + if (substream == NULL) { + dprintk("substream was NULL\n"); + return; + } + + runtime = substream->runtime; + if (runtime == NULL) { + dprintk("runtime was NULL\n"); + return; + } + + stride = runtime->frame_bits >> 3; + if (stride == 0) { + dprintk("stride is zero\n"); + return; + } + + length = num_bytes / stride; + if (length == 0) { + dprintk("%s: length was zero\n", __func__); + return; + } + + if (runtime->dma_area == NULL) { + dprintk("dma area was NULL - ignoring\n"); + return; + } + + oldptr = cxsc->hwptr_done_capture; + if (oldptr + length >= runtime->buffer_size) { + unsigned int cnt = + runtime->buffer_size - oldptr; + memcpy(runtime->dma_area + oldptr * stride, pcm_data, + cnt * stride); + memcpy(runtime->dma_area, pcm_data + cnt * stride, + length * stride - cnt * stride); + } else { + memcpy(runtime->dma_area + oldptr * stride, pcm_data, + length * stride); + } + snd_pcm_stream_lock(substream); + + cxsc->hwptr_done_capture += length; + if (cxsc->hwptr_done_capture >= + runtime->buffer_size) + cxsc->hwptr_done_capture -= + runtime->buffer_size; + + cxsc->capture_transfer_done += length; + if (cxsc->capture_transfer_done >= + runtime->period_size) { + cxsc->capture_transfer_done -= + runtime->period_size; + period_elapsed = 1; + } + + snd_pcm_stream_unlock(substream); + + if (period_elapsed) + snd_pcm_period_elapsed(substream); +} + +static int snd_cx18_pcm_capture_open(struct snd_pcm_substream *substream) +{ + struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct v4l2_device *v4l2_dev = cxsc->v4l2_dev; + struct cx18 *cx = to_cx18(v4l2_dev); + struct cx18_stream *s; + struct cx18_open_id item; + int ret; + + /* Instruct the cx18 to start sending packets */ + snd_cx18_lock(cxsc); + s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM]; + + item.cx = cx; + item.type = s->type; + item.open_id = cx->open_id++; + + /* See if the stream is available */ + if (cx18_claim_stream(&item, item.type)) { + /* No, it's already in use */ + snd_cx18_unlock(cxsc); + return -EBUSY; + } + + if (test_bit(CX18_F_S_STREAMOFF, &s->s_flags) || + test_and_set_bit(CX18_F_S_STREAMING, &s->s_flags)) { + /* We're already streaming. No additional action required */ + snd_cx18_unlock(cxsc); + return 0; + } + + + runtime->hw = snd_cx18_hw_capture; + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); + cxsc->capture_pcm_substream = substream; + runtime->private_data = cx; + + cx->pcm_announce_callback = cx18_alsa_announce_pcm_data; + + /* Not currently streaming, so start it up */ + set_bit(CX18_F_S_STREAMING, &s->s_flags); + ret = cx18_start_v4l2_encode_stream(s); + snd_cx18_unlock(cxsc); + + return ret; +} + +static int snd_cx18_pcm_capture_close(struct snd_pcm_substream *substream) +{ + struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream); + struct v4l2_device *v4l2_dev = cxsc->v4l2_dev; + struct cx18 *cx = to_cx18(v4l2_dev); + struct cx18_stream *s; + + /* Instruct the cx18 to stop sending packets */ + snd_cx18_lock(cxsc); + s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM]; + cx18_stop_v4l2_encode_stream(s, 0); + clear_bit(CX18_F_S_STREAMING, &s->s_flags); + + cx18_release_stream(s); + + cx->pcm_announce_callback = NULL; + snd_cx18_unlock(cxsc); + + return 0; +} + +static int snd_cx18_pcm_ioctl(struct snd_pcm_substream *substream, + unsigned int cmd, void *arg) +{ + struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream); + int ret; + + snd_cx18_lock(cxsc); + ret = snd_pcm_lib_ioctl(substream, cmd, arg); + snd_cx18_unlock(cxsc); + return ret; +} + + +static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, + size_t size) +{ + struct snd_pcm_runtime *runtime = subs->runtime; + + dprintk("Allocating vbuffer\n"); + if (runtime->dma_area) { + if (runtime->dma_bytes > size) + return 0; + + vfree(runtime->dma_area); + } + runtime->dma_area = vmalloc(size); + if (!runtime->dma_area) + return -ENOMEM; + + runtime->dma_bytes = size; + + return 0; +} + +static int snd_cx18_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + dprintk("%s called\n", __func__); + + return snd_pcm_alloc_vmalloc_buffer(substream, + params_buffer_bytes(params)); +} + +static int snd_cx18_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream); + unsigned long flags; + + spin_lock_irqsave(&cxsc->slock, flags); + if (substream->runtime->dma_area) { + dprintk("freeing pcm capture region\n"); + vfree(substream->runtime->dma_area); + substream->runtime->dma_area = NULL; + } + spin_unlock_irqrestore(&cxsc->slock, flags); + + return 0; +} + +static int snd_cx18_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream); + + cxsc->hwptr_done_capture = 0; + cxsc->capture_transfer_done = 0; + + return 0; +} + +static int snd_cx18_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + return 0; +} + +static +snd_pcm_uframes_t snd_cx18_pcm_pointer(struct snd_pcm_substream *substream) +{ + unsigned long flags; + snd_pcm_uframes_t hwptr_done; + struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream); + + spin_lock_irqsave(&cxsc->slock, flags); + hwptr_done = cxsc->hwptr_done_capture; + spin_unlock_irqrestore(&cxsc->slock, flags); + + return hwptr_done; +} + +static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs, + unsigned long offset) +{ + void *pageptr = subs->runtime->dma_area + offset; + + return vmalloc_to_page(pageptr); +} + +static struct snd_pcm_ops snd_cx18_pcm_capture_ops = { + .open = snd_cx18_pcm_capture_open, + .close = snd_cx18_pcm_capture_close, + .ioctl = snd_cx18_pcm_ioctl, + .hw_params = snd_cx18_pcm_hw_params, + .hw_free = snd_cx18_pcm_hw_free, + .prepare = snd_cx18_pcm_prepare, + .trigger = snd_cx18_pcm_trigger, + .pointer = snd_cx18_pcm_pointer, + .page = snd_pcm_get_vmalloc_page, +}; + +int snd_cx18_pcm_create(struct snd_cx18_card *cxsc) +{ + struct snd_pcm *sp; + struct snd_card *sc = cxsc->sc; + struct v4l2_device *v4l2_dev = cxsc->v4l2_dev; + struct cx18 *cx = to_cx18(v4l2_dev); + int ret; + + ret = snd_pcm_new(sc, "CX23418 PCM", + 0, /* PCM device 0, the only one for this card */ + 0, /* 0 playback substreams */ + 1, /* 1 capture substream */ + &sp); + if (ret) { + CX18_ALSA_ERR("%s: snd_cx18_pcm_create() failed with err %d\n", + __func__, ret); + goto err_exit; + } + + spin_lock_init(&cxsc->slock); + + snd_pcm_set_ops(sp, SNDRV_PCM_STREAM_CAPTURE, + &snd_cx18_pcm_capture_ops); + sp->info_flags = 0; + sp->private_data = cxsc; + strlcpy(sp->name, cx->card_name, sizeof(sp->name)); + + return 0; + +err_exit: + return ret; +} diff --git a/drivers/media/pci/cx18/cx18-alsa-pcm.h b/drivers/media/pci/cx18/cx18-alsa-pcm.h new file mode 100644 index 00000000..e2b2c5b0 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-alsa-pcm.h @@ -0,0 +1,27 @@ +/* + * ALSA PCM device for the + * ALSA interface to cx18 PCM capture streams + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int snd_cx18_pcm_create(struct snd_cx18_card *cxsc); + +/* Used by cx18-mailbox to announce the PCM data to the module */ +void cx18_alsa_announce_pcm_data(struct snd_cx18_card *card, u8 *pcm_data, + size_t num_bytes); diff --git a/drivers/media/pci/cx18/cx18-alsa.h b/drivers/media/pci/cx18/cx18-alsa.h new file mode 100644 index 00000000..447da374 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-alsa.h @@ -0,0 +1,75 @@ +/* + * ALSA interface to cx18 PCM capture streams + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +struct snd_card; + +struct snd_cx18_card { + struct v4l2_device *v4l2_dev; + struct snd_card *sc; + unsigned int capture_transfer_done; + unsigned int hwptr_done_capture; + struct snd_pcm_substream *capture_pcm_substream; + spinlock_t slock; +}; + +extern int cx18_alsa_debug; + +/* + * File operations that manipulate the encoder or video or audio subdevices + * need to be serialized. Use the same lock we use for v4l2 file ops. + */ +static inline void snd_cx18_lock(struct snd_cx18_card *cxsc) +{ + struct cx18 *cx = to_cx18(cxsc->v4l2_dev); + mutex_lock(&cx->serialize_lock); +} + +static inline void snd_cx18_unlock(struct snd_cx18_card *cxsc) +{ + struct cx18 *cx = to_cx18(cxsc->v4l2_dev); + mutex_unlock(&cx->serialize_lock); +} + +#define CX18_ALSA_DBGFLG_WARN (1 << 0) +#define CX18_ALSA_DBGFLG_WARN (1 << 0) +#define CX18_ALSA_DBGFLG_INFO (1 << 1) + +#define CX18_ALSA_DEBUG(x, type, fmt, args...) \ + do { \ + if ((x) & cx18_alsa_debug) \ + printk(KERN_INFO "%s-alsa: " type ": " fmt, \ + v4l2_dev->name , ## args); \ + } while (0) + +#define CX18_ALSA_DEBUG_WARN(fmt, args...) \ + CX18_ALSA_DEBUG(CX18_ALSA_DBGFLG_WARN, "warning", fmt , ## args) + +#define CX18_ALSA_DEBUG_INFO(fmt, args...) \ + CX18_ALSA_DEBUG(CX18_ALSA_DBGFLG_INFO, "info", fmt , ## args) + +#define CX18_ALSA_ERR(fmt, args...) \ + printk(KERN_ERR "%s-alsa: " fmt, v4l2_dev->name , ## args) + +#define CX18_ALSA_WARN(fmt, args...) \ + printk(KERN_WARNING "%s-alsa: " fmt, v4l2_dev->name , ## args) + +#define CX18_ALSA_INFO(fmt, args...) \ + printk(KERN_INFO "%s-alsa: " fmt, v4l2_dev->name , ## args) diff --git a/drivers/media/pci/cx18/cx18-audio.c b/drivers/media/pci/cx18/cx18-audio.c new file mode 100644 index 00000000..35268923 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-audio.c @@ -0,0 +1,92 @@ +/* + * cx18 audio-related functions + * + * Derived from ivtv-audio.c + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-cards.h" +#include "cx18-audio.h" + +#define CX18_AUDIO_ENABLE 0xc72014 +#define CX18_AI1_MUX_MASK 0x30 +#define CX18_AI1_MUX_I2S1 0x00 +#define CX18_AI1_MUX_I2S2 0x10 +#define CX18_AI1_MUX_843_I2S 0x20 + +/* Selects the audio input and output according to the current + settings. */ +int cx18_audio_set_io(struct cx18 *cx) +{ + const struct cx18_card_audio_input *in; + u32 u, v; + int err; + + /* Determine which input to use */ + if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) + in = &cx->card->radio_input; + else + in = &cx->card->audio_inputs[cx->audio_input]; + + /* handle muxer chips */ + v4l2_subdev_call(cx->sd_extmux, audio, s_routing, + (u32) in->muxer_input, 0, 0); + + err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl, + audio, s_routing, in->audio_input, 0, 0); + if (err) + return err; + + /* FIXME - this internal mux should be abstracted to a subdev */ + u = cx18_read_reg(cx, CX18_AUDIO_ENABLE); + v = u & ~CX18_AI1_MUX_MASK; + switch (in->audio_input) { + case CX18_AV_AUDIO_SERIAL1: + v |= CX18_AI1_MUX_I2S1; + break; + case CX18_AV_AUDIO_SERIAL2: + v |= CX18_AI1_MUX_I2S2; + break; + default: + v |= CX18_AI1_MUX_843_I2S; + break; + } + if (v == u) { + /* force a toggle of some AI1 MUX control bits */ + u &= ~CX18_AI1_MUX_MASK; + switch (in->audio_input) { + case CX18_AV_AUDIO_SERIAL1: + u |= CX18_AI1_MUX_843_I2S; + break; + case CX18_AV_AUDIO_SERIAL2: + u |= CX18_AI1_MUX_843_I2S; + break; + default: + u |= CX18_AI1_MUX_I2S1; + break; + } + cx18_write_reg_expect(cx, u | 0xb00, CX18_AUDIO_ENABLE, + u, CX18_AI1_MUX_MASK); + } + cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, + v, CX18_AI1_MUX_MASK); + return 0; +} diff --git a/drivers/media/pci/cx18/cx18-audio.h b/drivers/media/pci/cx18/cx18-audio.h new file mode 100644 index 00000000..2731d29b --- /dev/null +++ b/drivers/media/pci/cx18/cx18-audio.h @@ -0,0 +1,24 @@ +/* + * cx18 audio-related functions + * + * Derived from ivtv-audio.c + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int cx18_audio_set_io(struct cx18 *cx); diff --git a/drivers/media/pci/cx18/cx18-av-audio.c b/drivers/media/pci/cx18/cx18-av-audio.c new file mode 100644 index 00000000..4a24ffb1 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-av-audio.c @@ -0,0 +1,471 @@ +/* + * cx18 ADEC audio functions + * + * Derived from cx25840-audio.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include "cx18-driver.h" + +static int set_audclk_freq(struct cx18 *cx, u32 freq) +{ + struct cx18_av_state *state = &cx->av_state; + + if (freq != 32000 && freq != 44100 && freq != 48000) + return -EINVAL; + + /* + * The PLL parameters are based on the external crystal frequency that + * would ideally be: + * + * NTSC Color subcarrier freq * 8 = + * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz + * + * The accidents of history and rationale that explain from where this + * combination of magic numbers originate can be found in: + * + * [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in + * the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80 + * + * [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the + * NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83 + * + * As Mike Bradley has rightly pointed out, it's not the exact crystal + * frequency that matters, only that all parts of the driver and + * firmware are using the same value (close to the ideal value). + * + * Since I have a strong suspicion that, if the firmware ever assumes a + * crystal value at all, it will assume 28.636360 MHz, the crystal + * freq used in calculations in this driver will be: + * + * xtal_freq = 28.636360 MHz + * + * an error of less than 0.13 ppm which is way, way better than any off + * the shelf crystal will have for accuracy anyway. + * + * Below I aim to run the PLLs' VCOs near 400 MHz to minimze error. + * + * Many thanks to Jeff Campbell and Mike Bradley for their extensive + * investigation, experimentation, testing, and suggested solutions of + * of audio/video sync problems with SVideo and CVBS captures. + */ + + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { + switch (freq) { + case 32000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20 + */ + cx18_av_write4(cx, 0x108, 0x200d040f); + + /* VID_PLL Fraction = 0x2be2fe */ + /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ + cx18_av_write4(cx, 0x10c, 0x002be2fe); + + /* AUX_PLL Fraction = 0x176740c */ + /* xtal * 0xd.bb3a060/0x20 = 32000 * 384: 393 MHz p-pd*/ + cx18_av_write4(cx, 0x110, 0x0176740c); + + /* src3/4/6_ctl */ + /* 0x1.f77f = (4 * xtal/8*2/455) / 32000 */ + cx18_av_write4(cx, 0x900, 0x0801f77f); + cx18_av_write4(cx, 0x904, 0x0801f77f); + cx18_av_write4(cx, 0x90c, 0x0801f77f); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */ + cx18_av_write(cx, 0x127, 0x60); + + /* AUD_COUNT = 0x2fff = 8 samples * 4 * 384 - 1 */ + cx18_av_write4(cx, 0x12c, 0x11202fff); + + /* + * EN_AV_LOCK = 0 + * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 = + * ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8 + */ + cx18_av_write4(cx, 0x128, 0xa00d2ef8); + break; + + case 44100: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x18 + */ + cx18_av_write4(cx, 0x108, 0x180e040f); + + /* VID_PLL Fraction = 0x2be2fe */ + /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ + cx18_av_write4(cx, 0x10c, 0x002be2fe); + + /* AUX_PLL Fraction = 0x062a1f2 */ + /* xtal * 0xe.3150f90/0x18 = 44100 * 384: 406 MHz p-pd*/ + cx18_av_write4(cx, 0x110, 0x0062a1f2); + + /* src3/4/6_ctl */ + /* 0x1.6d59 = (4 * xtal/8*2/455) / 44100 */ + cx18_av_write4(cx, 0x900, 0x08016d59); + cx18_av_write4(cx, 0x904, 0x08016d59); + cx18_av_write4(cx, 0x90c, 0x08016d59); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x18 */ + cx18_av_write(cx, 0x127, 0x58); + + /* AUD_COUNT = 0x92ff = 49 samples * 2 * 384 - 1 */ + cx18_av_write4(cx, 0x12c, 0x112092ff); + + /* + * EN_AV_LOCK = 0 + * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 = + * ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8 + */ + cx18_av_write4(cx, 0x128, 0xa01d4bf8); + break; + + case 48000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x16 + */ + cx18_av_write4(cx, 0x108, 0x160e040f); + + /* VID_PLL Fraction = 0x2be2fe */ + /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ + cx18_av_write4(cx, 0x10c, 0x002be2fe); + + /* AUX_PLL Fraction = 0x05227ad */ + /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz p-pd*/ + cx18_av_write4(cx, 0x110, 0x005227ad); + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * xtal/8*2/455) / 48000 */ + cx18_av_write4(cx, 0x900, 0x08014faa); + cx18_av_write4(cx, 0x904, 0x08014faa); + cx18_av_write4(cx, 0x90c, 0x08014faa); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */ + cx18_av_write(cx, 0x127, 0x56); + + /* AUD_COUNT = 0x5fff = 4 samples * 16 * 384 - 1 */ + cx18_av_write4(cx, 0x12c, 0x11205fff); + + /* + * EN_AV_LOCK = 0 + * VID_COUNT = 0x1193f8 = 143999.000 * 8 = + * ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8 + */ + cx18_av_write4(cx, 0x128, 0xa01193f8); + break; + } + } else { + switch (freq) { + case 32000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x30 + */ + cx18_av_write4(cx, 0x108, 0x300d040f); + + /* VID_PLL Fraction = 0x2be2fe */ + /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ + cx18_av_write4(cx, 0x10c, 0x002be2fe); + + /* AUX_PLL Fraction = 0x176740c */ + /* xtal * 0xd.bb3a060/0x30 = 32000 * 256: 393 MHz p-pd*/ + cx18_av_write4(cx, 0x110, 0x0176740c); + + /* src1_ctl */ + /* 0x1.0000 = 32000/32000 */ + cx18_av_write4(cx, 0x8f8, 0x08010000); + + /* src3/4/6_ctl */ + /* 0x2.0000 = 2 * (32000/32000) */ + cx18_av_write4(cx, 0x900, 0x08020000); + cx18_av_write4(cx, 0x904, 0x08020000); + cx18_av_write4(cx, 0x90c, 0x08020000); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x30 */ + cx18_av_write(cx, 0x127, 0x70); + + /* AUD_COUNT = 0x1fff = 8 samples * 4 * 256 - 1 */ + cx18_av_write4(cx, 0x12c, 0x11201fff); + + /* + * EN_AV_LOCK = 0 + * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 = + * ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8 + */ + cx18_av_write4(cx, 0x128, 0xa00d2ef8); + break; + + case 44100: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x24 + */ + cx18_av_write4(cx, 0x108, 0x240e040f); + + /* VID_PLL Fraction = 0x2be2fe */ + /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ + cx18_av_write4(cx, 0x10c, 0x002be2fe); + + /* AUX_PLL Fraction = 0x062a1f2 */ + /* xtal * 0xe.3150f90/0x24 = 44100 * 256: 406 MHz p-pd*/ + cx18_av_write4(cx, 0x110, 0x0062a1f2); + + /* src1_ctl */ + /* 0x1.60cd = 44100/32000 */ + cx18_av_write4(cx, 0x8f8, 0x080160cd); + + /* src3/4/6_ctl */ + /* 0x1.7385 = 2 * (32000/44100) */ + cx18_av_write4(cx, 0x900, 0x08017385); + cx18_av_write4(cx, 0x904, 0x08017385); + cx18_av_write4(cx, 0x90c, 0x08017385); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x24 */ + cx18_av_write(cx, 0x127, 0x64); + + /* AUD_COUNT = 0x61ff = 49 samples * 2 * 256 - 1 */ + cx18_av_write4(cx, 0x12c, 0x112061ff); + + /* + * EN_AV_LOCK = 0 + * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 = + * ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8 + */ + cx18_av_write4(cx, 0x128, 0xa01d4bf8); + break; + + case 48000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20 + */ + cx18_av_write4(cx, 0x108, 0x200d040f); + + /* VID_PLL Fraction = 0x2be2fe */ + /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ + cx18_av_write4(cx, 0x10c, 0x002be2fe); + + /* AUX_PLL Fraction = 0x176740c */ + /* xtal * 0xd.bb3a060/0x20 = 48000 * 256: 393 MHz p-pd*/ + cx18_av_write4(cx, 0x110, 0x0176740c); + + /* src1_ctl */ + /* 0x1.8000 = 48000/32000 */ + cx18_av_write4(cx, 0x8f8, 0x08018000); + + /* src3/4/6_ctl */ + /* 0x1.5555 = 2 * (32000/48000) */ + cx18_av_write4(cx, 0x900, 0x08015555); + cx18_av_write4(cx, 0x904, 0x08015555); + cx18_av_write4(cx, 0x90c, 0x08015555); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */ + cx18_av_write(cx, 0x127, 0x60); + + /* AUD_COUNT = 0x3fff = 4 samples * 16 * 256 - 1 */ + cx18_av_write4(cx, 0x12c, 0x11203fff); + + /* + * EN_AV_LOCK = 0 + * VID_COUNT = 0x1193f8 = 143999.000 * 8 = + * ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8 + */ + cx18_av_write4(cx, 0x128, 0xa01193f8); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +void cx18_av_audio_set_path(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + u8 v; + + /* stop microcontroller */ + v = cx18_av_read(cx, 0x803) & ~0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + + /* assert soft reset */ + v = cx18_av_read(cx, 0x810) | 0x01; + cx18_av_write_expect(cx, 0x810, v, v, 0x0f); + + /* Mute everything to prevent the PFFT! */ + cx18_av_write(cx, 0x8d3, 0x1f); + + if (state->aud_input <= CX18_AV_AUDIO_SERIAL2) { + /* Set Path1 to Serial Audio Input */ + cx18_av_write4(cx, 0x8d0, 0x01011012); + + /* The microcontroller should not be started for the + * non-tuner inputs: autodetection is specific for + * TV audio. */ + } else { + /* Set Path1 to Analog Demod Main Channel */ + cx18_av_write4(cx, 0x8d0, 0x1f063870); + } + + set_audclk_freq(cx, state->audclk_freq); + + /* deassert soft reset */ + v = cx18_av_read(cx, 0x810) & ~0x01; + cx18_av_write_expect(cx, 0x810, v, v, 0x0f); + + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { + /* When the microcontroller detects the + * audio format, it will unmute the lines */ + v = cx18_av_read(cx, 0x803) | 0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + } +} + +static void set_volume(struct cx18 *cx, int volume) +{ + /* First convert the volume to msp3400 values (0-127) */ + int vol = volume >> 9; + /* now scale it up to cx18_av values + * -114dB to -96dB maps to 0 + * this should be 19, but in my testing that was 4dB too loud */ + if (vol <= 23) + vol = 0; + else + vol -= 23; + + /* PATH1_VOLUME */ + cx18_av_write(cx, 0x8d4, 228 - (vol * 2)); +} + +static void set_bass(struct cx18 *cx, int bass) +{ + /* PATH1_EQ_BASS_VOL */ + cx18_av_and_or(cx, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff)); +} + +static void set_treble(struct cx18 *cx, int treble) +{ + /* PATH1_EQ_TREBLE_VOL */ + cx18_av_and_or(cx, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff)); +} + +static void set_balance(struct cx18 *cx, int balance) +{ + int bal = balance >> 8; + if (bal > 0x80) { + /* PATH1_BAL_LEFT */ + cx18_av_and_or(cx, 0x8d5, 0x7f, 0x80); + /* PATH1_BAL_LEVEL */ + cx18_av_and_or(cx, 0x8d5, ~0x7f, bal & 0x7f); + } else { + /* PATH1_BAL_LEFT */ + cx18_av_and_or(cx, 0x8d5, 0x7f, 0x00); + /* PATH1_BAL_LEVEL */ + cx18_av_and_or(cx, 0x8d5, ~0x7f, 0x80 - bal); + } +} + +static void set_mute(struct cx18 *cx, int mute) +{ + struct cx18_av_state *state = &cx->av_state; + u8 v; + + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { + /* Must turn off microcontroller in order to mute sound. + * Not sure if this is the best method, but it does work. + * If the microcontroller is running, then it will undo any + * changes to the mute register. */ + v = cx18_av_read(cx, 0x803); + if (mute) { + /* disable microcontroller */ + v &= ~0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + cx18_av_write(cx, 0x8d3, 0x1f); + } else { + /* enable microcontroller */ + v |= 0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + } + } else { + /* SRC1_MUTE_EN */ + cx18_av_and_or(cx, 0x8d3, ~0x2, mute ? 0x02 : 0x00); + } +} + +int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + struct cx18_av_state *state = &cx->av_state; + int retval; + u8 v; + + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { + v = cx18_av_read(cx, 0x803) & ~0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + cx18_av_write(cx, 0x8d3, 0x1f); + } + v = cx18_av_read(cx, 0x810) | 0x1; + cx18_av_write_expect(cx, 0x810, v, v, 0x0f); + + retval = set_audclk_freq(cx, freq); + + v = cx18_av_read(cx, 0x810) & ~0x1; + cx18_av_write_expect(cx, 0x810, v, v, 0x0f); + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { + v = cx18_av_read(cx, 0x803) | 0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + } + return retval; +} + +static int cx18_av_audio_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct cx18 *cx = v4l2_get_subdevdata(sd); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + set_volume(cx, ctrl->val); + break; + case V4L2_CID_AUDIO_BASS: + set_bass(cx, ctrl->val); + break; + case V4L2_CID_AUDIO_TREBLE: + set_treble(cx, ctrl->val); + break; + case V4L2_CID_AUDIO_BALANCE: + set_balance(cx, ctrl->val); + break; + case V4L2_CID_AUDIO_MUTE: + set_mute(cx, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops = { + .s_ctrl = cx18_av_audio_s_ctrl, +}; diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c new file mode 100644 index 00000000..38b1d64f --- /dev/null +++ b/drivers/media/pci/cx18/cx18-av-core.c @@ -0,0 +1,1401 @@ +/* + * cx18 ADEC audio functions + * + * Derived from cx25840-core.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-cards.h" + +int cx18_av_write(struct cx18 *cx, u16 addr, u8 value) +{ + u32 reg = 0xc40000 + (addr & ~3); + u32 mask = 0xff; + int shift = (addr & 3) * 8; + u32 x = cx18_read_reg(cx, reg); + + x = (x & ~(mask << shift)) | ((u32)value << shift); + cx18_write_reg(cx, x, reg); + return 0; +} + +int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask) +{ + u32 reg = 0xc40000 + (addr & ~3); + int shift = (addr & 3) * 8; + u32 x = cx18_read_reg(cx, reg); + + x = (x & ~((u32)0xff << shift)) | ((u32)value << shift); + cx18_write_reg_expect(cx, x, reg, + ((u32)eval << shift), ((u32)mask << shift)); + return 0; +} + +int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value) +{ + cx18_write_reg(cx, value, 0xc40000 + addr); + return 0; +} + +int +cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, u32 mask) +{ + cx18_write_reg_expect(cx, value, 0xc40000 + addr, eval, mask); + return 0; +} + +int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value) +{ + cx18_write_reg_noretry(cx, value, 0xc40000 + addr); + return 0; +} + +u8 cx18_av_read(struct cx18 *cx, u16 addr) +{ + u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3)); + int shift = (addr & 3) * 8; + + return (x >> shift) & 0xff; +} + +u32 cx18_av_read4(struct cx18 *cx, u16 addr) +{ + return cx18_read_reg(cx, 0xc40000 + addr); +} + +int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask, + u8 or_value) +{ + return cx18_av_write(cx, addr, + (cx18_av_read(cx, addr) & and_mask) | + or_value); +} + +int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask, + u32 or_value) +{ + return cx18_av_write4(cx, addr, + (cx18_av_read4(cx, addr) & and_mask) | + or_value); +} + +static void cx18_av_init(struct cx18 *cx) +{ + /* + * The crystal freq used in calculations in this driver will be + * 28.636360 MHz. + * Aim to run the PLLs' VCOs near 400 MHz to minimze errors. + */ + + /* + * VDCLK Integer = 0x0f, Post Divider = 0x04 + * AIMCLK Integer = 0x0e, Post Divider = 0x16 + */ + cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f); + + /* VDCLK Fraction = 0x2be2fe */ + /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */ + cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe); + + /* AIMCLK Fraction = 0x05227ad */ + /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/ + cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */ + cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56); +} + +static void cx18_av_initialize(struct v4l2_subdev *sd) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + struct cx18 *cx = v4l2_get_subdevdata(sd); + int default_volume; + u32 v; + + cx18_av_loadfw(cx); + /* Stop 8051 code execution */ + cx18_av_write4_expect(cx, CXADEC_DL_CTL, 0x03000000, + 0x03000000, 0x13000000); + + /* initallize the PLL by toggling sleep bit */ + v = cx18_av_read4(cx, CXADEC_HOST_REG1); + /* enable sleep mode - register appears to be read only... */ + cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v | 1, v, 0xfffe); + /* disable sleep mode */ + cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v & 0xfffe, + v & 0xfffe, 0xffff); + + /* initialize DLLs */ + v = cx18_av_read4(cx, CXADEC_DLL1_DIAG_CTRL) & 0xE1FFFEFF; + /* disable FLD */ + cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v); + /* enable FLD */ + cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v | 0x10000100); + + v = cx18_av_read4(cx, CXADEC_DLL2_DIAG_CTRL) & 0xE1FFFEFF; + /* disable FLD */ + cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v); + /* enable FLD */ + cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v | 0x06000100); + + /* set analog bias currents. Set Vreg to 1.20V. */ + cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL1, 0x000A1802); + + v = cx18_av_read4(cx, CXADEC_AFE_DIAG_CTRL3) | 1; + /* enable TUNE_FIL_RST */ + cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, v, v, 0x03009F0F); + /* disable TUNE_FIL_RST */ + cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, + v & 0xFFFFFFFE, v & 0xFFFFFFFE, 0x03009F0F); + + /* enable 656 output */ + cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x040C00); + + /* video output drive strength */ + cx18_av_and_or4(cx, CXADEC_PIN_CTRL2, ~0, 0x2); + + /* reset video */ + cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0x8000); + cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0); + + /* + * Disable Video Auto-config of the Analog Front End and Video PLL. + * + * Since we only use BT.656 pixel mode, which works for both 525 and 625 + * line systems, it's just easier for us to set registers + * 0x102 (CXADEC_CHIP_CTRL), 0x104-0x106 (CXADEC_AFE_CTRL), + * 0x108-0x109 (CXADEC_PLL_CTRL1), and 0x10c-0x10f (CXADEC_VID_PLL_FRAC) + * ourselves, than to run around cleaning up after the auto-config. + * + * (Note: my CX23418 chip doesn't seem to let the ACFG_DIS bit + * get set to 1, but OTOH, it doesn't seem to do AFE and VID PLL + * autoconfig either.) + * + * As a default, also turn off Dual mode for ADC2 and set ADC2 to CH3. + */ + cx18_av_and_or4(cx, CXADEC_CHIP_CTRL, 0xFFFBFFFF, 0x00120000); + + /* Setup the Video and and Aux/Audio PLLs */ + cx18_av_init(cx); + + /* set video to auto-detect */ + /* Clear bits 11-12 to enable slow locking mode. Set autodetect mode */ + /* set the comb notch = 1 */ + cx18_av_and_or4(cx, CXADEC_MODE_CTRL, 0xFFF7E7F0, 0x02040800); + + /* Enable wtw_en in CRUSH_CTRL (Set bit 22) */ + /* Enable maj_sel in CRUSH_CTRL (Set bit 20) */ + cx18_av_and_or4(cx, CXADEC_CRUSH_CTRL, ~0, 0x00500000); + + /* Set VGA_TRACK_RANGE to 0x20 */ + cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000); + + /* + * Initial VBI setup + * VIP-1.1, 10 bit mode, enable Raw, disable sliced, + * don't clamp raw samples when codes are in use, 1 byte user D-words, + * IDID0 has line #, RP code V bit transition on VBLANK, data during + * blanking intervals + */ + cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e); + + /* Set the video input. + The setting in MODE_CTRL gets lost when we do the above setup */ + /* EncSetSignalStd(dwDevNum, pEnc->dwSigStd); */ + /* EncSetVideoInput(dwDevNum, pEnc->VidIndSelection); */ + + /* + * Analog Front End (AFE) + * Default to luma on ch1/ADC1, chroma on ch2/ADC2, SIF on ch3/ADC2 + * bypass_ch[1-3] use filter + * droop_comp_ch[1-3] disable + * clamp_en_ch[1-3] disable + * aud_in_sel ADC2 + * luma_in_sel ADC1 + * chroma_in_sel ADC2 + * clamp_sel_ch[2-3] midcode + * clamp_sel_ch1 video decoder + * vga_sel_ch3 audio decoder + * vga_sel_ch[1-2] video decoder + * half_bw_ch[1-3] disable + * +12db_ch[1-3] disable + */ + cx18_av_and_or4(cx, CXADEC_AFE_CTRL, 0xFF000000, 0x00005D00); + +/* if(dwEnable && dw3DCombAvailable) { */ +/* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */ +/* } else { */ +/* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */ +/* } */ + cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F); + default_volume = cx18_av_read(cx, 0x8d4); + /* + * Enforce the legacy volume scale mapping limits to avoid + * -ERANGE errors when initializing the volume control + */ + if (default_volume > 228) { + /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */ + default_volume = 228; + cx18_av_write(cx, 0x8d4, 228); + } else if (default_volume < 20) { + /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */ + default_volume = 20; + cx18_av_write(cx, 0x8d4, 20); + } + default_volume = (((228 - default_volume) >> 1) + 23) << 9; + state->volume->cur.val = state->volume->default_value = default_volume; + v4l2_ctrl_handler_setup(&state->hdl); +} + +static int cx18_av_reset(struct v4l2_subdev *sd, u32 val) +{ + cx18_av_initialize(sd); + return 0; +} + +static int cx18_av_load_fw(struct v4l2_subdev *sd) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + + if (!state->is_initialized) { + /* initialize on first use */ + state->is_initialized = 1; + cx18_av_initialize(sd); + } + return 0; +} + +void cx18_av_std_setup(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + struct v4l2_subdev *sd = &state->sd; + v4l2_std_id std = state->std; + + /* + * Video ADC crystal clock to pixel clock SRC decimation ratio + * 28.636360 MHz/13.5 Mpps * 256 = 0x21f.07b + */ + const int src_decimation = 0x21f; + + int hblank, hactive, burst, vblank, vactive, sc; + int vblank656; + int luma_lpf, uv_lpf, comb; + u32 pll_int, pll_frac, pll_post; + + /* datasheet startup, step 8d */ + if (std & ~V4L2_STD_NTSC) + cx18_av_write(cx, 0x49f, 0x11); + else + cx18_av_write(cx, 0x49f, 0x14); + + /* + * Note: At the end of a field, there are 3 sets of half line duration + * (double horizontal rate) pulses: + * + * 5 (625) or 6 (525) half-lines to blank for the vertical retrace + * 5 (625) or 6 (525) vertical sync pulses of half line duration + * 5 (625) or 6 (525) half-lines of equalization pulses + */ + if (std & V4L2_STD_625_50) { + /* + * The following relationships of half line counts should hold: + * 625 = vblank656 + vactive + * 10 = vblank656 - vblank = vsync pulses + equalization pulses + * + * vblank656: half lines after line 625/mid-313 of blanked video + * vblank: half lines, after line 5/317, of blanked video + * vactive: half lines of active video + + * 5 half lines after the end of active video + * + * As far as I can tell: + * vblank656 starts counting from the falling edge of the first + * vsync pulse (start of line 1 or mid-313) + * vblank starts counting from the after the 5 vsync pulses and + * 5 or 4 equalization pulses (start of line 6 or 318) + * + * For 625 line systems the driver will extract VBI information + * from lines 6-23 and lines 318-335 (but the slicer can only + * handle 17 lines, not the 18 in the vblank region). + * In addition, we need vblank656 and vblank to be one whole + * line longer, to cover line 24 and 336, so the SAV/EAV RP + * codes get generated such that the encoder can actually + * extract line 23 & 335 (WSS). We'll lose 1 line in each field + * at the top of the screen. + * + * It appears the 5 half lines that happen after active + * video must be included in vactive (579 instead of 574), + * otherwise the colors get badly displayed in various regions + * of the screen. I guess the chroma comb filter gets confused + * without them (at least when a PVR-350 is the PAL source). + */ + vblank656 = 48; /* lines 1 - 24 & 313 - 336 */ + vblank = 38; /* lines 6 - 24 & 318 - 336 */ + vactive = 579; /* lines 24 - 313 & 337 - 626 */ + + /* + * For a 13.5 Mpps clock and 15,625 Hz line rate, a line is + * is 864 pixels = 720 active + 144 blanking. ITU-R BT.601 + * specifies 12 luma clock periods or ~ 0.9 * 13.5 Mpps after + * the end of active video to start a horizontal line, so that + * leaves 132 pixels of hblank to ignore. + */ + hblank = 132; + hactive = 720; + + /* + * Burst gate delay (for 625 line systems) + * Hsync leading edge to color burst rise = 5.6 us + * Color burst width = 2.25 us + * Gate width = 4 pixel clocks + * (5.6 us + 2.25/2 us) * 13.5 Mpps + 4/2 clocks = 92.79 clocks + */ + burst = 93; + luma_lpf = 2; + if (std & V4L2_STD_PAL) { + uv_lpf = 1; + comb = 0x20; + /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */ + sc = 688700; + } else if (std == V4L2_STD_PAL_Nc) { + uv_lpf = 1; + comb = 0x20; + /* sc = 3582056.25 * src_decimation/28636360 * 2^13 */ + sc = 556422; + } else { /* SECAM */ + uv_lpf = 0; + comb = 0; + /* (fr + fb)/2 = (4406260 + 4250000)/2 = 4328130 */ + /* sc = 4328130 * src_decimation/28636360 * 2^13 */ + sc = 672314; + } + } else { + /* + * The following relationships of half line counts should hold: + * 525 = prevsync + vblank656 + vactive + * 12 = vblank656 - vblank = vsync pulses + equalization pulses + * + * prevsync: 6 half-lines before the vsync pulses + * vblank656: half lines, after line 3/mid-266, of blanked video + * vblank: half lines, after line 9/272, of blanked video + * vactive: half lines of active video + * + * As far as I can tell: + * vblank656 starts counting from the falling edge of the first + * vsync pulse (start of line 4 or mid-266) + * vblank starts counting from the after the 6 vsync pulses and + * 6 or 5 equalization pulses (start of line 10 or 272) + * + * For 525 line systems the driver will extract VBI information + * from lines 10-21 and lines 273-284. + */ + vblank656 = 38; /* lines 4 - 22 & 266 - 284 */ + vblank = 26; /* lines 10 - 22 & 272 - 284 */ + vactive = 481; /* lines 23 - 263 & 285 - 525 */ + + /* + * For a 13.5 Mpps clock and 15,734.26 Hz line rate, a line is + * is 858 pixels = 720 active + 138 blanking. The Hsync leading + * edge should happen 1.2 us * 13.5 Mpps ~= 16 pixels after the + * end of active video, leaving 122 pixels of hblank to ignore + * before active video starts. + */ + hactive = 720; + hblank = 122; + luma_lpf = 1; + uv_lpf = 1; + + /* + * Burst gate delay (for 525 line systems) + * Hsync leading edge to color burst rise = 5.3 us + * Color burst width = 2.5 us + * Gate width = 4 pixel clocks + * (5.3 us + 2.5/2 us) * 13.5 Mpps + 4/2 clocks = 90.425 clocks + */ + if (std == V4L2_STD_PAL_60) { + burst = 90; + luma_lpf = 2; + comb = 0x20; + /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */ + sc = 688700; + } else if (std == V4L2_STD_PAL_M) { + /* The 97 needs to be verified against PAL-M timings */ + burst = 97; + comb = 0x20; + /* sc = 3575611.49 * src_decimation/28636360 * 2^13 */ + sc = 555421; + } else { + burst = 90; + comb = 0x66; + /* sc = 3579545.45.. * src_decimation/28636360 * 2^13 */ + sc = 556032; + } + } + + /* DEBUG: Displays configured PLL frequency */ + pll_int = cx18_av_read(cx, 0x108); + pll_frac = cx18_av_read4(cx, 0x10c) & 0x1ffffff; + pll_post = cx18_av_read(cx, 0x109); + CX18_DEBUG_INFO_DEV(sd, "PLL regs = int: %u, frac: %u, post: %u\n", + pll_int, pll_frac, pll_post); + + if (pll_post) { + int fsc, pll; + u64 tmp; + + pll = (28636360L * ((((u64)pll_int) << 25) + pll_frac)) >> 25; + pll /= pll_post; + CX18_DEBUG_INFO_DEV(sd, "Video PLL = %d.%06d MHz\n", + pll / 1000000, pll % 1000000); + CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n", + pll / 8000000, (pll / 8) % 1000000); + + CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio " + "= %d.%03d\n", src_decimation / 256, + ((src_decimation % 256) * 1000) / 256); + + tmp = 28636360 * (u64) sc; + do_div(tmp, src_decimation); + fsc = tmp >> 13; + CX18_DEBUG_INFO_DEV(sd, + "Chroma sub-carrier initial freq = %d.%06d " + "MHz\n", fsc / 1000000, fsc % 1000000); + + CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, " + "vactive %i, vblank656 %i, src_dec %i, " + "burst 0x%02x, luma_lpf %i, uv_lpf %i, " + "comb 0x%02x, sc 0x%06x\n", + hblank, hactive, vblank, vactive, vblank656, + src_decimation, burst, luma_lpf, uv_lpf, + comb, sc); + } + + /* Sets horizontal blanking delay and active lines */ + cx18_av_write(cx, 0x470, hblank); + cx18_av_write(cx, 0x471, 0xff & (((hblank >> 8) & 0x3) | + (hactive << 4))); + cx18_av_write(cx, 0x472, hactive >> 4); + + /* Sets burst gate delay */ + cx18_av_write(cx, 0x473, burst); + + /* Sets vertical blanking delay and active duration */ + cx18_av_write(cx, 0x474, vblank); + cx18_av_write(cx, 0x475, 0xff & (((vblank >> 8) & 0x3) | + (vactive << 4))); + cx18_av_write(cx, 0x476, vactive >> 4); + cx18_av_write(cx, 0x477, vblank656); + + /* Sets src decimation rate */ + cx18_av_write(cx, 0x478, 0xff & src_decimation); + cx18_av_write(cx, 0x479, 0xff & (src_decimation >> 8)); + + /* Sets Luma and UV Low pass filters */ + cx18_av_write(cx, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30)); + + /* Enables comb filters */ + cx18_av_write(cx, 0x47b, comb); + + /* Sets SC Step*/ + cx18_av_write(cx, 0x47c, sc); + cx18_av_write(cx, 0x47d, 0xff & sc >> 8); + cx18_av_write(cx, 0x47e, 0xff & sc >> 16); + + if (std & V4L2_STD_625_50) { + state->slicer_line_delay = 1; + state->slicer_line_offset = (6 + state->slicer_line_delay - 2); + } else { + state->slicer_line_delay = 0; + state->slicer_line_offset = (10 + state->slicer_line_delay - 2); + } + cx18_av_write(cx, 0x47f, state->slicer_line_delay); +} + +static void input_change(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + v4l2_std_id std = state->std; + u8 v; + + /* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */ + cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); + cx18_av_and_or(cx, 0x401, ~0x60, 0); + cx18_av_and_or(cx, 0x401, ~0x60, 0x60); + + if (std & V4L2_STD_525_60) { + if (std == V4L2_STD_NTSC_M_JP) { + /* Japan uses EIAJ audio standard */ + cx18_av_write_expect(cx, 0x808, 0xf7, 0xf7, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x02, 0x02, 0x3f); + } else if (std == V4L2_STD_NTSC_M_KR) { + /* South Korea uses A2 audio standard */ + cx18_av_write_expect(cx, 0x808, 0xf8, 0xf8, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); + } else { + /* Others use the BTSC audio standard */ + cx18_av_write_expect(cx, 0x808, 0xf6, 0xf6, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x01, 0x01, 0x3f); + } + } else if (std & V4L2_STD_PAL) { + /* Follow tuner change procedure for PAL */ + cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); + } else if (std & V4L2_STD_SECAM) { + /* Select autodetect for SECAM */ + cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); + } + + v = cx18_av_read(cx, 0x803); + if (v & 0x10) { + /* restart audio decoder microcontroller */ + v &= ~0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + v |= 0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + } +} + +static int cx18_av_s_frequency(struct v4l2_subdev *sd, + const struct v4l2_frequency *freq) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + input_change(cx); + return 0; +} + +static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, + enum cx18_av_audio_input aud_input) +{ + struct cx18_av_state *state = &cx->av_state; + struct v4l2_subdev *sd = &state->sd; + + enum analog_signal_type { + NONE, CVBS, Y, C, SIF, Pb, Pr + } ch[3] = {NONE, NONE, NONE}; + + u8 afe_mux_cfg; + u8 adc2_cfg; + u8 input_mode; + u32 afe_cfg; + int i; + + CX18_DEBUG_INFO_DEV(sd, "decoder set video input %d, audio input %d\n", + vid_input, aud_input); + + if (vid_input >= CX18_AV_COMPOSITE1 && + vid_input <= CX18_AV_COMPOSITE8) { + afe_mux_cfg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1); + ch[0] = CVBS; + input_mode = 0x0; + } else if (vid_input >= CX18_AV_COMPONENT_LUMA1) { + int luma = vid_input & 0xf000; + int r_chroma = vid_input & 0xf0000; + int b_chroma = vid_input & 0xf00000; + + if ((vid_input & ~0xfff000) || + luma < CX18_AV_COMPONENT_LUMA1 || + luma > CX18_AV_COMPONENT_LUMA8 || + r_chroma < CX18_AV_COMPONENT_R_CHROMA4 || + r_chroma > CX18_AV_COMPONENT_R_CHROMA6 || + b_chroma < CX18_AV_COMPONENT_B_CHROMA7 || + b_chroma > CX18_AV_COMPONENT_B_CHROMA8) { + CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n", + vid_input); + return -EINVAL; + } + afe_mux_cfg = (luma - CX18_AV_COMPONENT_LUMA1) >> 12; + ch[0] = Y; + afe_mux_cfg |= (r_chroma - CX18_AV_COMPONENT_R_CHROMA4) >> 12; + ch[1] = Pr; + afe_mux_cfg |= (b_chroma - CX18_AV_COMPONENT_B_CHROMA7) >> 14; + ch[2] = Pb; + input_mode = 0x6; + } else { + int luma = vid_input & 0xf0; + int chroma = vid_input & 0xf00; + + if ((vid_input & ~0xff0) || + luma < CX18_AV_SVIDEO_LUMA1 || + luma > CX18_AV_SVIDEO_LUMA8 || + chroma < CX18_AV_SVIDEO_CHROMA4 || + chroma > CX18_AV_SVIDEO_CHROMA8) { + CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n", + vid_input); + return -EINVAL; + } + afe_mux_cfg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4); + ch[0] = Y; + if (chroma >= CX18_AV_SVIDEO_CHROMA7) { + afe_mux_cfg &= 0x3f; + afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA7) >> 2; + ch[2] = C; + } else { + afe_mux_cfg &= 0xcf; + afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA4) >> 4; + ch[1] = C; + } + input_mode = 0x2; + } + + switch (aud_input) { + case CX18_AV_AUDIO_SERIAL1: + case CX18_AV_AUDIO_SERIAL2: + /* do nothing, use serial audio input */ + break; + case CX18_AV_AUDIO4: + afe_mux_cfg &= ~0x30; + ch[1] = SIF; + break; + case CX18_AV_AUDIO5: + afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x10; + ch[1] = SIF; + break; + case CX18_AV_AUDIO6: + afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x20; + ch[1] = SIF; + break; + case CX18_AV_AUDIO7: + afe_mux_cfg &= ~0xc0; + ch[2] = SIF; + break; + case CX18_AV_AUDIO8: + afe_mux_cfg = (afe_mux_cfg & ~0xc0) | 0x40; + ch[2] = SIF; + break; + + default: + CX18_ERR_DEV(sd, "0x%04x is not a valid audio input!\n", + aud_input); + return -EINVAL; + } + + /* Set up analog front end multiplexers */ + cx18_av_write_expect(cx, 0x103, afe_mux_cfg, afe_mux_cfg, 0xf7); + /* Set INPUT_MODE to Composite, S-Video, or Component */ + cx18_av_and_or(cx, 0x401, ~0x6, input_mode); + + /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ + adc2_cfg = cx18_av_read(cx, 0x102); + if (ch[2] == NONE) + adc2_cfg &= ~0x2; /* No sig on CH3, set ADC2 to CH2 for input */ + else + adc2_cfg |= 0x2; /* Signal on CH3, set ADC2 to CH3 for input */ + + /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */ + if (ch[1] != NONE && ch[2] != NONE) + adc2_cfg |= 0x4; /* Set dual mode */ + else + adc2_cfg &= ~0x4; /* Clear dual mode */ + cx18_av_write_expect(cx, 0x102, adc2_cfg, adc2_cfg, 0x17); + + /* Configure the analog front end */ + afe_cfg = cx18_av_read4(cx, CXADEC_AFE_CTRL); + afe_cfg &= 0xff000000; + afe_cfg |= 0x00005000; /* CHROMA_IN, AUD_IN: ADC2; LUMA_IN: ADC1 */ + if (ch[1] != NONE && ch[2] != NONE) + afe_cfg |= 0x00000030; /* half_bw_ch[2-3] since in dual mode */ + + for (i = 0; i < 3; i++) { + switch (ch[i]) { + default: + case NONE: + /* CLAMP_SEL = Fixed to midcode clamp level */ + afe_cfg |= (0x00000200 << i); + break; + case CVBS: + case Y: + if (i > 0) + afe_cfg |= 0x00002000; /* LUMA_IN_SEL: ADC2 */ + break; + case C: + case Pb: + case Pr: + /* CLAMP_SEL = Fixed to midcode clamp level */ + afe_cfg |= (0x00000200 << i); + if (i == 0 && ch[i] == C) + afe_cfg &= ~0x00001000; /* CHROMA_IN_SEL ADC1 */ + break; + case SIF: + /* + * VGA_GAIN_SEL = Audio Decoder + * CLAMP_SEL = Fixed to midcode clamp level + */ + afe_cfg |= (0x00000240 << i); + if (i == 0) + afe_cfg &= ~0x00004000; /* AUD_IN_SEL ADC1 */ + break; + } + } + + cx18_av_write4(cx, CXADEC_AFE_CTRL, afe_cfg); + + state->vid_input = vid_input; + state->aud_input = aud_input; + cx18_av_audio_set_path(cx); + input_change(cx); + return 0; +} + +static int cx18_av_s_video_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + struct cx18 *cx = v4l2_get_subdevdata(sd); + return set_input(cx, input, state->aud_input); +} + +static int cx18_av_s_audio_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + struct cx18 *cx = v4l2_get_subdevdata(sd); + return set_input(cx, state->vid_input, input); +} + +static int cx18_av_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + struct cx18 *cx = v4l2_get_subdevdata(sd); + u8 vpres; + u8 mode; + int val = 0; + + if (state->radio) + return 0; + + vpres = cx18_av_read(cx, 0x40e) & 0x20; + vt->signal = vpres ? 0xffff : 0x0; + + vt->capability |= + V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; + + mode = cx18_av_read(cx, 0x804); + + /* get rxsubchans and audmode */ + if ((mode & 0xf) == 1) + val |= V4L2_TUNER_SUB_STEREO; + else + val |= V4L2_TUNER_SUB_MONO; + + if (mode == 2 || mode == 4) + val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + + if (mode & 0x10) + val |= V4L2_TUNER_SUB_SAP; + + vt->rxsubchans = val; + vt->audmode = state->audmode; + return 0; +} + +static int cx18_av_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + struct cx18 *cx = v4l2_get_subdevdata(sd); + u8 v; + + if (state->radio) + return 0; + + v = cx18_av_read(cx, 0x809); + v &= ~0xf; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + /* mono -> mono + stereo -> mono + bilingual -> lang1 */ + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + /* mono -> mono + stereo -> stereo + bilingual -> lang1 */ + v |= 0x4; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang1/lang2 */ + v |= 0x7; + break; + case V4L2_TUNER_MODE_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang2 */ + v |= 0x1; + break; + default: + return -EINVAL; + } + cx18_av_write_expect(cx, 0x809, v, v, 0xff); + state->audmode = vt->audmode; + return 0; +} + +static int cx18_av_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + struct cx18 *cx = v4l2_get_subdevdata(sd); + + u8 fmt = 0; /* zero is autodetect */ + u8 pal_m = 0; + + if (state->radio == 0 && state->std == norm) + return 0; + + state->radio = 0; + state->std = norm; + + /* First tests should be against specific std */ + if (state->std == V4L2_STD_NTSC_M_JP) { + fmt = 0x2; + } else if (state->std == V4L2_STD_NTSC_443) { + fmt = 0x3; + } else if (state->std == V4L2_STD_PAL_M) { + pal_m = 1; + fmt = 0x5; + } else if (state->std == V4L2_STD_PAL_N) { + fmt = 0x6; + } else if (state->std == V4L2_STD_PAL_Nc) { + fmt = 0x7; + } else if (state->std == V4L2_STD_PAL_60) { + fmt = 0x8; + } else { + /* Then, test against generic ones */ + if (state->std & V4L2_STD_NTSC) + fmt = 0x1; + else if (state->std & V4L2_STD_PAL) + fmt = 0x4; + else if (state->std & V4L2_STD_SECAM) + fmt = 0xc; + } + + CX18_DEBUG_INFO_DEV(sd, "changing video std to fmt %i\n", fmt); + + /* Follow step 9 of section 3.16 in the cx18_av datasheet. + Without this PAL may display a vertical ghosting effect. + This happens for example with the Yuan MPC622. */ + if (fmt >= 4 && fmt < 8) { + /* Set format to NTSC-M */ + cx18_av_and_or(cx, 0x400, ~0xf, 1); + /* Turn off LCOMB */ + cx18_av_and_or(cx, 0x47b, ~6, 0); + } + cx18_av_and_or(cx, 0x400, ~0x2f, fmt | 0x20); + cx18_av_and_or(cx, 0x403, ~0x3, pal_m); + cx18_av_std_setup(cx); + input_change(cx); + return 0; +} + +static int cx18_av_s_radio(struct v4l2_subdev *sd) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + state->radio = 1; + return 0; +} + +static int cx18_av_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct cx18 *cx = v4l2_get_subdevdata(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + cx18_av_write(cx, 0x414, ctrl->val - 128); + break; + + case V4L2_CID_CONTRAST: + cx18_av_write(cx, 0x415, ctrl->val << 1); + break; + + case V4L2_CID_SATURATION: + cx18_av_write(cx, 0x420, ctrl->val << 1); + cx18_av_write(cx, 0x421, ctrl->val << 1); + break; + + case V4L2_CID_HUE: + cx18_av_write(cx, 0x422, ctrl->val); + break; + + default: + return -EINVAL; + } + return 0; +} + +static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + struct cx18 *cx = v4l2_get_subdevdata(sd); + int HSC, VSC, Vsrc, Hsrc, filter, Vlines; + int is_50Hz = !(state->std & V4L2_STD_525_60); + + if (fmt->code != V4L2_MBUS_FMT_FIXED) + return -EINVAL; + + fmt->field = V4L2_FIELD_INTERLACED; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + + Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4; + Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4; + + Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4; + Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4; + + /* + * This adjustment reflects the excess of vactive, set in + * cx18_av_std_setup(), above standard values: + * + * 480 + 1 for 60 Hz systems + * 576 + 3 for 50 Hz systems + */ + Vlines = fmt->height + (is_50Hz ? 3 : 1); + + /* + * Invalid height and width scaling requests are: + * 1. width less than 1/16 of the source width + * 2. width greater than the source width + * 3. height less than 1/8 of the source height + * 4. height greater than the source height + */ + if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) || + (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) { + CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n", + fmt->width, fmt->height); + return -ERANGE; + } + + HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20); + VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); + VSC &= 0x1fff; + + if (fmt->width >= 385) + filter = 0; + else if (fmt->width > 192) + filter = 1; + else if (fmt->width > 96) + filter = 2; + else + filter = 3; + + CX18_DEBUG_INFO_DEV(sd, + "decoder set size %dx%d -> scale %ux%u\n", + fmt->width, fmt->height, HSC, VSC); + + /* HSCALE=HSC */ + cx18_av_write(cx, 0x418, HSC & 0xff); + cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff); + cx18_av_write(cx, 0x41a, HSC >> 16); + /* VSCALE=VSC */ + cx18_av_write(cx, 0x41c, VSC & 0xff); + cx18_av_write(cx, 0x41d, VSC >> 8); + /* VS_INTRLACE=1 VFILT=filter */ + cx18_av_write(cx, 0x41e, 0x8 | filter); + return 0; +} + +static int cx18_av_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + + CX18_DEBUG_INFO_DEV(sd, "%s output\n", enable ? "enable" : "disable"); + if (enable) { + cx18_av_write(cx, 0x115, 0x8c); + cx18_av_write(cx, 0x116, 0x07); + } else { + cx18_av_write(cx, 0x115, 0x00); + cx18_av_write(cx, 0x116, 0x00); + } + return 0; +} + +static void log_video_status(struct cx18 *cx) +{ + static const char *const fmt_strs[] = { + "0x0", + "NTSC-M", "NTSC-J", "NTSC-4.43", + "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60", + "0x9", "0xA", "0xB", + "SECAM", + "0xD", "0xE", "0xF" + }; + + struct cx18_av_state *state = &cx->av_state; + struct v4l2_subdev *sd = &state->sd; + u8 vidfmt_sel = cx18_av_read(cx, 0x400) & 0xf; + u8 gen_stat1 = cx18_av_read(cx, 0x40d); + u8 gen_stat2 = cx18_av_read(cx, 0x40e); + int vid_input = state->vid_input; + + CX18_INFO_DEV(sd, "Video signal: %spresent\n", + (gen_stat2 & 0x20) ? "" : "not "); + CX18_INFO_DEV(sd, "Detected format: %s\n", + fmt_strs[gen_stat1 & 0xf]); + + CX18_INFO_DEV(sd, "Specified standard: %s\n", + vidfmt_sel ? fmt_strs[vidfmt_sel] + : "automatic detection"); + + if (vid_input >= CX18_AV_COMPOSITE1 && + vid_input <= CX18_AV_COMPOSITE8) { + CX18_INFO_DEV(sd, "Specified video input: Composite %d\n", + vid_input - CX18_AV_COMPOSITE1 + 1); + } else { + CX18_INFO_DEV(sd, "Specified video input: " + "S-Video (Luma In%d, Chroma In%d)\n", + (vid_input & 0xf0) >> 4, + (vid_input & 0xf00) >> 8); + } + + CX18_INFO_DEV(sd, "Specified audioclock freq: %d Hz\n", + state->audclk_freq); +} + +static void log_audio_status(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + struct v4l2_subdev *sd = &state->sd; + u8 download_ctl = cx18_av_read(cx, 0x803); + u8 mod_det_stat0 = cx18_av_read(cx, 0x804); + u8 mod_det_stat1 = cx18_av_read(cx, 0x805); + u8 audio_config = cx18_av_read(cx, 0x808); + u8 pref_mode = cx18_av_read(cx, 0x809); + u8 afc0 = cx18_av_read(cx, 0x80b); + u8 mute_ctl = cx18_av_read(cx, 0x8d3); + int aud_input = state->aud_input; + char *p; + + switch (mod_det_stat0) { + case 0x00: p = "mono"; break; + case 0x01: p = "stereo"; break; + case 0x02: p = "dual"; break; + case 0x04: p = "tri"; break; + case 0x10: p = "mono with SAP"; break; + case 0x11: p = "stereo with SAP"; break; + case 0x12: p = "dual with SAP"; break; + case 0x14: p = "tri with SAP"; break; + case 0xfe: p = "forced mode"; break; + default: p = "not defined"; break; + } + CX18_INFO_DEV(sd, "Detected audio mode: %s\n", p); + + switch (mod_det_stat1) { + case 0x00: p = "not defined"; break; + case 0x01: p = "EIAJ"; break; + case 0x02: p = "A2-M"; break; + case 0x03: p = "A2-BG"; break; + case 0x04: p = "A2-DK1"; break; + case 0x05: p = "A2-DK2"; break; + case 0x06: p = "A2-DK3"; break; + case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x08: p = "AM-L"; break; + case 0x09: p = "NICAM-BG"; break; + case 0x0a: p = "NICAM-DK"; break; + case 0x0b: p = "NICAM-I"; break; + case 0x0c: p = "NICAM-L"; break; + case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "detected chrominance"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; + case 0xff: p = "no detected audio standard"; break; + default: p = "not defined"; break; + } + CX18_INFO_DEV(sd, "Detected audio standard: %s\n", p); + CX18_INFO_DEV(sd, "Audio muted: %s\n", + (mute_ctl & 0x2) ? "yes" : "no"); + CX18_INFO_DEV(sd, "Audio microcontroller: %s\n", + (download_ctl & 0x10) ? "running" : "stopped"); + + switch (audio_config >> 4) { + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; + case 0x0f: p = "automatic detection"; break; + default: p = "undefined"; break; + } + CX18_INFO_DEV(sd, "Configured audio standard: %s\n", p); + + if ((audio_config >> 4) < 0xF) { + switch (audio_config & 0xF) { + case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break; + case 0x01: p = "MONO2 (LANGUAGE B)"; break; + case 0x02: p = "MONO3 (STEREO forced MONO)"; break; + case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; + case 0x04: p = "STEREO"; break; + case 0x05: p = "DUAL1 (AC)"; break; + case 0x06: p = "DUAL2 (BC)"; break; + case 0x07: p = "DUAL3 (AB)"; break; + default: p = "undefined"; + } + CX18_INFO_DEV(sd, "Configured audio mode: %s\n", p); + } else { + switch (audio_config & 0xF) { + case 0x00: p = "BG"; break; + case 0x01: p = "DK1"; break; + case 0x02: p = "DK2"; break; + case 0x03: p = "DK3"; break; + case 0x04: p = "I"; break; + case 0x05: p = "L"; break; + case 0x06: p = "BTSC"; break; + case 0x07: p = "EIAJ"; break; + case 0x08: p = "A2-M"; break; + case 0x09: p = "FM Radio (4.5 MHz)"; break; + case 0x0a: p = "FM Radio (5.5 MHz)"; break; + case 0x0b: p = "S-Video"; break; + case 0x0f: p = "automatic standard and mode detection"; break; + default: p = "undefined"; break; + } + CX18_INFO_DEV(sd, "Configured audio system: %s\n", p); + } + + if (aud_input) + CX18_INFO_DEV(sd, "Specified audio input: Tuner (In%d)\n", + aud_input); + else + CX18_INFO_DEV(sd, "Specified audio input: External\n"); + + switch (pref_mode & 0xf) { + case 0: p = "mono/language A"; break; + case 1: p = "language B"; break; + case 2: p = "language C"; break; + case 3: p = "analog fallback"; break; + case 4: p = "stereo"; break; + case 5: p = "language AC"; break; + case 6: p = "language BC"; break; + case 7: p = "language AB"; break; + default: p = "undefined"; break; + } + CX18_INFO_DEV(sd, "Preferred audio mode: %s\n", p); + + if ((audio_config & 0xf) == 0xf) { + switch ((afc0 >> 3) & 0x1) { + case 0: p = "system DK"; break; + case 1: p = "system L"; break; + } + CX18_INFO_DEV(sd, "Selected 65 MHz format: %s\n", p); + + switch (afc0 & 0x7) { + case 0: p = "Chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; break; + } + CX18_INFO_DEV(sd, "Selected 45 MHz format: %s\n", p); + } +} + +static int cx18_av_log_status(struct v4l2_subdev *sd) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + log_video_status(cx); + log_audio_status(cx); + return 0; +} + +static inline int cx18_av_dbg_match(const struct v4l2_dbg_match *match) +{ + return match->type == V4L2_CHIP_MATCH_HOST && match->addr == 1; +} + +static int cx18_av_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + + if (cx18_av_dbg_match(&chip->match)) { + chip->ident = state->id; + chip->revision = state->rev; + } + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cx18_av_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + + if (!cx18_av_dbg_match(®->match)) + return -EINVAL; + if ((reg->reg & 0x3) != 0) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 4; + reg->val = cx18_av_read4(cx, reg->reg & 0x00000ffc); + return 0; +} + +static int cx18_av_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + + if (!cx18_av_dbg_match(®->match)) + return -EINVAL; + if ((reg->reg & 0x3) != 0) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cx18_av_write4(cx, reg->reg & 0x00000ffc, reg->val); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops cx18_av_ctrl_ops = { + .s_ctrl = cx18_av_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops cx18_av_general_ops = { + .g_chip_ident = cx18_av_g_chip_ident, + .log_status = cx18_av_log_status, + .load_fw = cx18_av_load_fw, + .reset = cx18_av_reset, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = cx18_av_s_std, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = cx18_av_g_register, + .s_register = cx18_av_s_register, +#endif +}; + +static const struct v4l2_subdev_tuner_ops cx18_av_tuner_ops = { + .s_radio = cx18_av_s_radio, + .s_frequency = cx18_av_s_frequency, + .g_tuner = cx18_av_g_tuner, + .s_tuner = cx18_av_s_tuner, +}; + +static const struct v4l2_subdev_audio_ops cx18_av_audio_ops = { + .s_clock_freq = cx18_av_s_clock_freq, + .s_routing = cx18_av_s_audio_routing, +}; + +static const struct v4l2_subdev_video_ops cx18_av_video_ops = { + .s_routing = cx18_av_s_video_routing, + .s_stream = cx18_av_s_stream, + .s_mbus_fmt = cx18_av_s_mbus_fmt, +}; + +static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = { + .decode_vbi_line = cx18_av_decode_vbi_line, + .g_sliced_fmt = cx18_av_g_sliced_fmt, + .s_sliced_fmt = cx18_av_s_sliced_fmt, + .s_raw_fmt = cx18_av_s_raw_fmt, +}; + +static const struct v4l2_subdev_ops cx18_av_ops = { + .core = &cx18_av_general_ops, + .tuner = &cx18_av_tuner_ops, + .audio = &cx18_av_audio_ops, + .video = &cx18_av_video_ops, + .vbi = &cx18_av_vbi_ops, +}; + +int cx18_av_probe(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + struct v4l2_subdev *sd; + int err; + + state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff; + state->id = ((state->rev >> 4) == CXADEC_CHIP_TYPE_MAKO) + ? V4L2_IDENT_CX23418_843 : V4L2_IDENT_UNKNOWN; + + state->vid_input = CX18_AV_COMPOSITE7; + state->aud_input = CX18_AV_AUDIO8; + state->audclk_freq = 48000; + state->audmode = V4L2_TUNER_MODE_LANG1; + state->slicer_line_delay = 0; + state->slicer_line_offset = (10 + state->slicer_line_delay - 2); + + sd = &state->sd; + v4l2_subdev_init(sd, &cx18_av_ops); + v4l2_set_subdevdata(sd, cx); + snprintf(sd->name, sizeof(sd->name), + "%s %03x", cx->v4l2_dev.name, (state->rev >> 4)); + sd->grp_id = CX18_HW_418_AV; + v4l2_ctrl_handler_init(&state->hdl, 9); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + + state->volume = v4l2_ctrl_new_std(&state->hdl, + &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME, + 0, 65535, 65535 / 100, 0); + v4l2_ctrl_new_std(&state->hdl, + &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE, + 0, 1, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, + V4L2_CID_AUDIO_BASS, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, + 0, 65535, 65535 / 100, 32768); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + return err; + } + err = v4l2_device_register_subdev(&cx->v4l2_dev, sd); + if (err) + v4l2_ctrl_handler_free(&state->hdl); + else + cx18_av_init(cx); + return err; +} diff --git a/drivers/media/pci/cx18/cx18-av-core.h b/drivers/media/pci/cx18/cx18-av-core.h new file mode 100644 index 00000000..e9c69d9c --- /dev/null +++ b/drivers/media/pci/cx18/cx18-av-core.h @@ -0,0 +1,391 @@ +/* + * cx18 ADEC header + * + * Derived from cx25840-core.h + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX18_AV_CORE_H_ +#define _CX18_AV_CORE_H_ + +#include +#include + +struct cx18; + +enum cx18_av_video_input { + /* Composite video inputs In1-In8 */ + CX18_AV_COMPOSITE1 = 1, + CX18_AV_COMPOSITE2, + CX18_AV_COMPOSITE3, + CX18_AV_COMPOSITE4, + CX18_AV_COMPOSITE5, + CX18_AV_COMPOSITE6, + CX18_AV_COMPOSITE7, + CX18_AV_COMPOSITE8, + + /* S-Video inputs consist of one luma input (In1-In8) ORed with one + chroma input (In5-In8) */ + CX18_AV_SVIDEO_LUMA1 = 0x10, + CX18_AV_SVIDEO_LUMA2 = 0x20, + CX18_AV_SVIDEO_LUMA3 = 0x30, + CX18_AV_SVIDEO_LUMA4 = 0x40, + CX18_AV_SVIDEO_LUMA5 = 0x50, + CX18_AV_SVIDEO_LUMA6 = 0x60, + CX18_AV_SVIDEO_LUMA7 = 0x70, + CX18_AV_SVIDEO_LUMA8 = 0x80, + CX18_AV_SVIDEO_CHROMA4 = 0x400, + CX18_AV_SVIDEO_CHROMA5 = 0x500, + CX18_AV_SVIDEO_CHROMA6 = 0x600, + CX18_AV_SVIDEO_CHROMA7 = 0x700, + CX18_AV_SVIDEO_CHROMA8 = 0x800, + + /* S-Video aliases for common luma/chroma combinations */ + CX18_AV_SVIDEO1 = 0x510, + CX18_AV_SVIDEO2 = 0x620, + CX18_AV_SVIDEO3 = 0x730, + CX18_AV_SVIDEO4 = 0x840, + + /* Component Video inputs consist of one luma input (In1-In8) ORed + with a red chroma (In4-In6) and blue chroma input (In7-In8) */ + CX18_AV_COMPONENT_LUMA1 = 0x1000, + CX18_AV_COMPONENT_LUMA2 = 0x2000, + CX18_AV_COMPONENT_LUMA3 = 0x3000, + CX18_AV_COMPONENT_LUMA4 = 0x4000, + CX18_AV_COMPONENT_LUMA5 = 0x5000, + CX18_AV_COMPONENT_LUMA6 = 0x6000, + CX18_AV_COMPONENT_LUMA7 = 0x7000, + CX18_AV_COMPONENT_LUMA8 = 0x8000, + CX18_AV_COMPONENT_R_CHROMA4 = 0x40000, + CX18_AV_COMPONENT_R_CHROMA5 = 0x50000, + CX18_AV_COMPONENT_R_CHROMA6 = 0x60000, + CX18_AV_COMPONENT_B_CHROMA7 = 0x700000, + CX18_AV_COMPONENT_B_CHROMA8 = 0x800000, + + /* Component Video aliases for common combinations */ + CX18_AV_COMPONENT1 = 0x861000, +}; + +enum cx18_av_audio_input { + /* Audio inputs: serial or In4-In8 */ + CX18_AV_AUDIO_SERIAL1, + CX18_AV_AUDIO_SERIAL2, + CX18_AV_AUDIO4 = 4, + CX18_AV_AUDIO5, + CX18_AV_AUDIO6, + CX18_AV_AUDIO7, + CX18_AV_AUDIO8, +}; + +struct cx18_av_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_ctrl *volume; + int radio; + v4l2_std_id std; + enum cx18_av_video_input vid_input; + enum cx18_av_audio_input aud_input; + u32 audclk_freq; + int audmode; + u32 id; + u32 rev; + int is_initialized; + + /* + * The VBI slicer starts operating and counting lines, beginning at + * slicer line count of 1, at D lines after the deassertion of VRESET. + * This staring field line, S, is 6 (& 319) or 10 (& 273) for 625 or 525 + * line systems respectively. Sliced ancillary data captured on VBI + * slicer line M is inserted after the VBI slicer is done with line M, + * when VBI slicer line count is N = M+1. Thus when the VBI slicer + * reports a VBI slicer line number with ancillary data, the IDID0 byte + * indicates VBI slicer line N. The actual field line that the captured + * data comes from is + * + * L = M+(S+D-1) = N-1+(S+D-1) = N + (S+D-2). + * + * L is the line in the field, not frame, from which the VBI data came. + * N is the line reported by the slicer in the ancillary data. + * D is the slicer_line_delay value programmed into register 0x47f. + * S is 6 for 625 line systems or 10 for 525 line systems + * (S+D-2) is the slicer_line_offset used to convert slicer reported + * line counts to actual field lines. + */ + int slicer_line_delay; + int slicer_line_offset; +}; + + +/* Registers */ +#define CXADEC_CHIP_TYPE_TIGER 0x837 +#define CXADEC_CHIP_TYPE_MAKO 0x843 + +#define CXADEC_HOST_REG1 0x000 +#define CXADEC_HOST_REG2 0x001 + +#define CXADEC_CHIP_CTRL 0x100 +#define CXADEC_AFE_CTRL 0x104 +#define CXADEC_PLL_CTRL1 0x108 +#define CXADEC_VID_PLL_FRAC 0x10C +#define CXADEC_AUX_PLL_FRAC 0x110 +#define CXADEC_PIN_CTRL1 0x114 +#define CXADEC_PIN_CTRL2 0x118 +#define CXADEC_PIN_CFG1 0x11C +#define CXADEC_PIN_CFG2 0x120 + +#define CXADEC_PIN_CFG3 0x124 +#define CXADEC_I2S_MCLK 0x127 + +#define CXADEC_AUD_LOCK1 0x128 +#define CXADEC_AUD_LOCK2 0x12C +#define CXADEC_POWER_CTRL 0x130 +#define CXADEC_AFE_DIAG_CTRL1 0x134 +#define CXADEC_AFE_DIAG_CTRL2 0x138 +#define CXADEC_AFE_DIAG_CTRL3 0x13C +#define CXADEC_PLL_DIAG_CTRL 0x140 +#define CXADEC_TEST_CTRL1 0x144 +#define CXADEC_TEST_CTRL2 0x148 +#define CXADEC_BIST_STAT 0x14C +#define CXADEC_DLL1_DIAG_CTRL 0x158 +#define CXADEC_DLL2_DIAG_CTRL 0x15C + +/* IR registers */ +#define CXADEC_IR_CTRL_REG 0x200 +#define CXADEC_IR_TXCLK_REG 0x204 +#define CXADEC_IR_RXCLK_REG 0x208 +#define CXADEC_IR_CDUTY_REG 0x20C +#define CXADEC_IR_STAT_REG 0x210 +#define CXADEC_IR_IRQEN_REG 0x214 +#define CXADEC_IR_FILTER_REG 0x218 +#define CXADEC_IR_FIFO_REG 0x21C + +/* Video Registers */ +#define CXADEC_MODE_CTRL 0x400 +#define CXADEC_OUT_CTRL1 0x404 +#define CXADEC_OUT_CTRL2 0x408 +#define CXADEC_GEN_STAT 0x40C +#define CXADEC_INT_STAT_MASK 0x410 +#define CXADEC_LUMA_CTRL 0x414 + +#define CXADEC_BRIGHTNESS_CTRL_BYTE 0x414 +#define CXADEC_CONTRAST_CTRL_BYTE 0x415 +#define CXADEC_LUMA_CTRL_BYTE_3 0x416 + +#define CXADEC_HSCALE_CTRL 0x418 +#define CXADEC_VSCALE_CTRL 0x41C + +#define CXADEC_CHROMA_CTRL 0x420 + +#define CXADEC_USAT_CTRL_BYTE 0x420 +#define CXADEC_VSAT_CTRL_BYTE 0x421 +#define CXADEC_HUE_CTRL_BYTE 0x422 + +#define CXADEC_VBI_LINE_CTRL1 0x424 +#define CXADEC_VBI_LINE_CTRL2 0x428 +#define CXADEC_VBI_LINE_CTRL3 0x42C +#define CXADEC_VBI_LINE_CTRL4 0x430 +#define CXADEC_VBI_LINE_CTRL5 0x434 +#define CXADEC_VBI_FC_CFG 0x438 +#define CXADEC_VBI_MISC_CFG1 0x43C +#define CXADEC_VBI_MISC_CFG2 0x440 +#define CXADEC_VBI_PAY1 0x444 +#define CXADEC_VBI_PAY2 0x448 +#define CXADEC_VBI_CUST1_CFG1 0x44C +#define CXADEC_VBI_CUST1_CFG2 0x450 +#define CXADEC_VBI_CUST1_CFG3 0x454 +#define CXADEC_VBI_CUST2_CFG1 0x458 +#define CXADEC_VBI_CUST2_CFG2 0x45C +#define CXADEC_VBI_CUST2_CFG3 0x460 +#define CXADEC_VBI_CUST3_CFG1 0x464 +#define CXADEC_VBI_CUST3_CFG2 0x468 +#define CXADEC_VBI_CUST3_CFG3 0x46C +#define CXADEC_HORIZ_TIM_CTRL 0x470 +#define CXADEC_VERT_TIM_CTRL 0x474 +#define CXADEC_SRC_COMB_CFG 0x478 +#define CXADEC_CHROMA_VBIOFF_CFG 0x47C +#define CXADEC_FIELD_COUNT 0x480 +#define CXADEC_MISC_TIM_CTRL 0x484 +#define CXADEC_DFE_CTRL1 0x488 +#define CXADEC_DFE_CTRL2 0x48C +#define CXADEC_DFE_CTRL3 0x490 +#define CXADEC_PLL_CTRL2 0x494 +#define CXADEC_HTL_CTRL 0x498 +#define CXADEC_COMB_CTRL 0x49C +#define CXADEC_CRUSH_CTRL 0x4A0 +#define CXADEC_SOFT_RST_CTRL 0x4A4 +#define CXADEC_MV_DT_CTRL2 0x4A8 +#define CXADEC_MV_DT_CTRL3 0x4AC +#define CXADEC_MISC_DIAG_CTRL 0x4B8 + +#define CXADEC_DL_CTL 0x800 +#define CXADEC_DL_CTL_ADDRESS_LOW 0x800 /* Byte 1 in DL_CTL */ +#define CXADEC_DL_CTL_ADDRESS_HIGH 0x801 /* Byte 2 in DL_CTL */ +#define CXADEC_DL_CTL_DATA 0x802 /* Byte 3 in DL_CTL */ +#define CXADEC_DL_CTL_CONTROL 0x803 /* Byte 4 in DL_CTL */ + +#define CXADEC_STD_DET_STATUS 0x804 + +#define CXADEC_STD_DET_CTL 0x808 +#define CXADEC_STD_DET_CTL_AUD_CTL 0x808 /* Byte 1 in STD_DET_CTL */ +#define CXADEC_STD_DET_CTL_PREF_MODE 0x809 /* Byte 2 in STD_DET_CTL */ + +#define CXADEC_DW8051_INT 0x80C +#define CXADEC_GENERAL_CTL 0x810 +#define CXADEC_AAGC_CTL 0x814 +#define CXADEC_IF_SRC_CTL 0x818 +#define CXADEC_ANLOG_DEMOD_CTL 0x81C +#define CXADEC_ROT_FREQ_CTL 0x820 +#define CXADEC_FM1_CTL 0x824 +#define CXADEC_PDF_CTL 0x828 +#define CXADEC_DFT1_CTL1 0x82C +#define CXADEC_DFT1_CTL2 0x830 +#define CXADEC_DFT_STATUS 0x834 +#define CXADEC_DFT2_CTL1 0x838 +#define CXADEC_DFT2_CTL2 0x83C +#define CXADEC_DFT2_STATUS 0x840 +#define CXADEC_DFT3_CTL1 0x844 +#define CXADEC_DFT3_CTL2 0x848 +#define CXADEC_DFT3_STATUS 0x84C +#define CXADEC_DFT4_CTL1 0x850 +#define CXADEC_DFT4_CTL2 0x854 +#define CXADEC_DFT4_STATUS 0x858 +#define CXADEC_AM_MTS_DET 0x85C +#define CXADEC_ANALOG_MUX_CTL 0x860 +#define CXADEC_DIG_PLL_CTL1 0x864 +#define CXADEC_DIG_PLL_CTL2 0x868 +#define CXADEC_DIG_PLL_CTL3 0x86C +#define CXADEC_DIG_PLL_CTL4 0x870 +#define CXADEC_DIG_PLL_CTL5 0x874 +#define CXADEC_DEEMPH_GAIN_CTL 0x878 +#define CXADEC_DEEMPH_COEF1 0x87C +#define CXADEC_DEEMPH_COEF2 0x880 +#define CXADEC_DBX1_CTL1 0x884 +#define CXADEC_DBX1_CTL2 0x888 +#define CXADEC_DBX1_STATUS 0x88C +#define CXADEC_DBX2_CTL1 0x890 +#define CXADEC_DBX2_CTL2 0x894 +#define CXADEC_DBX2_STATUS 0x898 +#define CXADEC_AM_FM_DIFF 0x89C + +/* NICAM registers go here */ +#define CXADEC_NICAM_STATUS 0x8C8 +#define CXADEC_DEMATRIX_CTL 0x8CC + +#define CXADEC_PATH1_CTL1 0x8D0 +#define CXADEC_PATH1_VOL_CTL 0x8D4 +#define CXADEC_PATH1_EQ_CTL 0x8D8 +#define CXADEC_PATH1_SC_CTL 0x8DC + +#define CXADEC_PATH2_CTL1 0x8E0 +#define CXADEC_PATH2_VOL_CTL 0x8E4 +#define CXADEC_PATH2_EQ_CTL 0x8E8 +#define CXADEC_PATH2_SC_CTL 0x8EC + +#define CXADEC_SRC_CTL 0x8F0 +#define CXADEC_SRC_LF_COEF 0x8F4 +#define CXADEC_SRC1_CTL 0x8F8 +#define CXADEC_SRC2_CTL 0x8FC +#define CXADEC_SRC3_CTL 0x900 +#define CXADEC_SRC4_CTL 0x904 +#define CXADEC_SRC5_CTL 0x908 +#define CXADEC_SRC6_CTL 0x90C + +#define CXADEC_BASEBAND_OUT_SEL 0x910 +#define CXADEC_I2S_IN_CTL 0x914 +#define CXADEC_I2S_OUT_CTL 0x918 +#define CXADEC_AC97_CTL 0x91C +#define CXADEC_QAM_PDF 0x920 +#define CXADEC_QAM_CONST_DEC 0x924 +#define CXADEC_QAM_ROTATOR_FREQ 0x948 + +/* Bit definitions / settings used in Mako Audio */ +#define CXADEC_PREF_MODE_MONO_LANGA 0 +#define CXADEC_PREF_MODE_MONO_LANGB 1 +#define CXADEC_PREF_MODE_MONO_LANGC 2 +#define CXADEC_PREF_MODE_FALLBACK 3 +#define CXADEC_PREF_MODE_STEREO 4 +#define CXADEC_PREF_MODE_DUAL_LANG_AC 5 +#define CXADEC_PREF_MODE_DUAL_LANG_BC 6 +#define CXADEC_PREF_MODE_DUAL_LANG_AB 7 + + +#define CXADEC_DETECT_STEREO 1 +#define CXADEC_DETECT_DUAL 2 +#define CXADEC_DETECT_TRI 4 +#define CXADEC_DETECT_SAP 0x10 +#define CXADEC_DETECT_NO_SIGNAL 0xFF + +#define CXADEC_SELECT_AUDIO_STANDARD_BG 0xF0 /* NICAM BG and A2 BG */ +#define CXADEC_SELECT_AUDIO_STANDARD_DK1 0xF1 /* NICAM DK and A2 DK */ +#define CXADEC_SELECT_AUDIO_STANDARD_DK2 0xF2 +#define CXADEC_SELECT_AUDIO_STANDARD_DK3 0xF3 +#define CXADEC_SELECT_AUDIO_STANDARD_I 0xF4 /* NICAM I and A1 */ +#define CXADEC_SELECT_AUDIO_STANDARD_L 0xF5 /* NICAM L and System L AM */ +#define CXADEC_SELECT_AUDIO_STANDARD_BTSC 0xF6 +#define CXADEC_SELECT_AUDIO_STANDARD_EIAJ 0xF7 +#define CXADEC_SELECT_AUDIO_STANDARD_A2_M 0xF8 /* A2 M */ +#define CXADEC_SELECT_AUDIO_STANDARD_FM 0xF9 /* FM radio */ +#define CXADEC_SELECT_AUDIO_STANDARD_AUTO 0xFF /* Auto detect */ + +static inline struct cx18_av_state *to_cx18_av_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct cx18_av_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cx18_av_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ +/* cx18_av-core.c */ +int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); +int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value); +int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value); +int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask); +int cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, + u32 mask); +u8 cx18_av_read(struct cx18 *cx, u16 addr); +u32 cx18_av_read4(struct cx18 *cx, u16 addr); +int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value); +int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value); +void cx18_av_std_setup(struct cx18 *cx); + +int cx18_av_probe(struct cx18 *cx); + +/* ----------------------------------------------------------------------- */ +/* cx18_av-firmware.c */ +int cx18_av_loadfw(struct cx18 *cx); + +/* ----------------------------------------------------------------------- */ +/* cx18_av-audio.c */ +int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq); +void cx18_av_audio_set_path(struct cx18 *cx); +extern const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops; + +/* ----------------------------------------------------------------------- */ +/* cx18_av-vbi.c */ +int cx18_av_decode_vbi_line(struct v4l2_subdev *sd, + struct v4l2_decode_vbi_line *vbi); +int cx18_av_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt); +int cx18_av_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); +int cx18_av_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); + +#endif diff --git a/drivers/media/pci/cx18/cx18-av-firmware.c b/drivers/media/pci/cx18/cx18-av-firmware.c new file mode 100644 index 00000000..a34fd082 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-av-firmware.c @@ -0,0 +1,225 @@ +/* + * cx18 ADEC firmware functions + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include + +#define CX18_AUDIO_ENABLE 0xc72014 +#define CX18_AI1_MUX_MASK 0x30 +#define CX18_AI1_MUX_I2S1 0x00 +#define CX18_AI1_MUX_I2S2 0x10 +#define CX18_AI1_MUX_843_I2S 0x20 +#define CX18_AI1_MUX_INVALID 0x30 + +#define FWFILE "v4l-cx23418-dig.fw" + +static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw) +{ + struct v4l2_subdev *sd = &cx->av_state.sd; + int ret = 0; + const u8 *data; + u32 size; + int addr; + u32 expected, dl_control; + + /* Ensure we put the 8051 in reset and enable firmware upload mode */ + dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); + do { + dl_control &= 0x00ffffff; + dl_control |= 0x0f000000; + cx18_av_write4_noretry(cx, CXADEC_DL_CTL, dl_control); + dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); + } while ((dl_control & 0xff000000) != 0x0f000000); + + /* Read and auto increment until at address 0x0000 */ + while (dl_control & 0x3fff) + dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); + + data = fw->data; + size = fw->size; + for (addr = 0; addr < size; addr++) { + dl_control &= 0xffff3fff; /* ignore top 2 bits of address */ + expected = 0x0f000000 | ((u32)data[addr] << 16) | addr; + if (expected != dl_control) { + CX18_ERR_DEV(sd, "verification of %s firmware load " + "failed: expected %#010x got %#010x\n", + FWFILE, expected, dl_control); + ret = -EIO; + break; + } + dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); + } + if (ret == 0) + CX18_INFO_DEV(sd, "verified load of %s firmware (%d bytes)\n", + FWFILE, size); + return ret; +} + +int cx18_av_loadfw(struct cx18 *cx) +{ + struct v4l2_subdev *sd = &cx->av_state.sd; + const struct firmware *fw = NULL; + u32 size; + u32 u, v; + const u8 *ptr; + int i; + int retries1 = 0; + + if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) { + CX18_ERR_DEV(sd, "unable to open firmware %s\n", FWFILE); + return -EINVAL; + } + + /* The firmware load often has byte errors, so allow for several + retries, both at byte level and at the firmware load level. */ + while (retries1 < 5) { + cx18_av_write4_expect(cx, CXADEC_CHIP_CTRL, 0x00010000, + 0x00008430, 0xffffffff); /* cx25843 */ + cx18_av_write_expect(cx, CXADEC_STD_DET_CTL, 0xf6, 0xf6, 0xff); + + /* Reset the Mako core, Register is alias of CXADEC_CHIP_CTRL */ + cx18_av_write4_expect(cx, 0x8100, 0x00010000, + 0x00008430, 0xffffffff); /* cx25843 */ + + /* Put the 8051 in reset and enable firmware upload */ + cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000); + + ptr = fw->data; + size = fw->size; + + for (i = 0; i < size; i++) { + u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16); + u32 value = 0; + int retries2; + int unrec_err = 0; + + for (retries2 = 0; retries2 < CX18_MAX_MMIO_WR_RETRIES; + retries2++) { + cx18_av_write4_noretry(cx, CXADEC_DL_CTL, + dl_control); + udelay(10); + value = cx18_av_read4(cx, CXADEC_DL_CTL); + if (value == dl_control) + break; + /* Check if we can correct the byte by changing + the address. We can only write the lower + address byte of the address. */ + if ((value & 0x3F00) != (dl_control & 0x3F00)) { + unrec_err = 1; + break; + } + } + if (unrec_err || retries2 >= CX18_MAX_MMIO_WR_RETRIES) + break; + } + if (i == size) + break; + retries1++; + } + if (retries1 >= 5) { + CX18_ERR_DEV(sd, "unable to load firmware %s\n", FWFILE); + release_firmware(fw); + return -EIO; + } + + cx18_av_write4_expect(cx, CXADEC_DL_CTL, + 0x03000000 | fw->size, 0x03000000, 0x13000000); + + CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size); + + if (cx18_av_verifyfw(cx, fw) == 0) + cx18_av_write4_expect(cx, CXADEC_DL_CTL, + 0x13000000 | fw->size, 0x13000000, 0x13000000); + + /* Output to the 416 */ + cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000); + + /* Audio input control 1 set to Sony mode */ + /* Audio output input 2 is 0 for slave operation input */ + /* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */ + /* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge + after WS transition for first bit of audio word. */ + cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0); + + /* Audio output control 1 is set to Sony mode */ + /* Audio output control 2 is set to 1 for master mode */ + /* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */ + /* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge + after WS transition for first bit of audio word. */ + /* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT + are generated) */ + cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0); + + /* set alt I2s master clock to /0x16 and enable alt divider i2s + passthrough */ + cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5600B687); + + cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, 0x000000F6, 0x000000F6, + 0x3F00FFFF); + /* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */ + + /* Set bit 0 in register 0x9CC to signify that this is MiniMe. */ + /* Register 0x09CC is defined by the Merlin firmware, and doesn't + have a name in the spec. */ + cx18_av_write4(cx, 0x09CC, 1); + + v = cx18_read_reg(cx, CX18_AUDIO_ENABLE); + /* If bit 11 is 1, clear bit 10 */ + if (v & 0x800) + cx18_write_reg_expect(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE, + 0, 0x400); + + /* Toggle the AI1 MUX */ + v = cx18_read_reg(cx, CX18_AUDIO_ENABLE); + u = v & CX18_AI1_MUX_MASK; + v &= ~CX18_AI1_MUX_MASK; + if (u == CX18_AI1_MUX_843_I2S || u == CX18_AI1_MUX_INVALID) { + /* Switch to I2S1 */ + v |= CX18_AI1_MUX_I2S1; + cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, + v, CX18_AI1_MUX_MASK); + /* Switch back to the A/V decoder core I2S output */ + v = (v & ~CX18_AI1_MUX_MASK) | CX18_AI1_MUX_843_I2S; + } else { + /* Switch to the A/V decoder core I2S output */ + v |= CX18_AI1_MUX_843_I2S; + cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, + v, CX18_AI1_MUX_MASK); + /* Switch back to I2S1 or I2S2 */ + v = (v & ~CX18_AI1_MUX_MASK) | u; + } + cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, + v, CX18_AI1_MUX_MASK); + + /* Enable WW auto audio standard detection */ + v = cx18_av_read4(cx, CXADEC_STD_DET_CTL); + v |= 0xFF; /* Auto by default */ + v |= 0x400; /* Stereo by default */ + v |= 0x14000000; + cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF); + + release_firmware(fw); + return 0; +} + +MODULE_FIRMWARE(FWFILE); diff --git a/drivers/media/pci/cx18/cx18-av-vbi.c b/drivers/media/pci/cx18/cx18-av-vbi.c new file mode 100644 index 00000000..24698284 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-av-vbi.c @@ -0,0 +1,313 @@ +/* + * cx18 ADEC VBI functions + * + * Derived from cx25840-vbi.c + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + + +#include "cx18-driver.h" + +/* + * For sliced VBI output, we set up to use VIP-1.1, 8-bit mode, + * NN counts 1 byte Dwords, an IDID with the VBI line # in it. + * Thus, according to the VIP-2 Spec, our VBI ancillary data lines + * (should!) look like: + * 4 byte EAV code: 0xff 0x00 0x00 0xRP + * unknown number of possible idle bytes + * 3 byte Anc data preamble: 0x00 0xff 0xff + * 1 byte data identifier: ne010iii (parity bits, 010, DID bits) + * 1 byte secondary data id: nessssss (parity bits, SDID bits) + * 1 byte data word count: necccccc (parity bits, NN Dword count) + * 2 byte Internal DID: VBI-line-# 0x80 + * NN data bytes + * 1 byte checksum + * Fill bytes needed to fil out to 4*NN bytes of payload + * + * The RP codes for EAVs when in VIP-1.1 mode, not in raw mode, & + * in the vertical blanking interval are: + * 0xb0 (Task 0 VerticalBlank HorizontalBlank 0 0 0 0) + * 0xf0 (Task EvenField VerticalBlank HorizontalBlank 0 0 0 0) + * + * Since the V bit is only allowed to toggle in the EAV RP code, just + * before the first active region line and for active lines, they are: + * 0x90 (Task 0 0 HorizontalBlank 0 0 0 0) + * 0xd0 (Task EvenField 0 HorizontalBlank 0 0 0 0) + * + * The user application DID bytes we care about are: + * 0x91 (1 0 010 0 !ActiveLine AncDataPresent) + * 0x55 (0 1 010 2ndField !ActiveLine AncDataPresent) + * + */ +static const u8 sliced_vbi_did[2] = { 0x91, 0x55 }; + +struct vbi_anc_data { + /* u8 eav[4]; */ + /* u8 idle[]; Variable number of idle bytes */ + u8 preamble[3]; + u8 did; + u8 sdid; + u8 data_count; + u8 idid[2]; + u8 payload[1]; /* data_count of payload */ + /* u8 checksum; */ + /* u8 fill[]; Variable number of fill bytes */ +}; + +static int odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static int decode_vps(u8 *dst, u8 *p) +{ + static const u8 biphase_tbl[] = { + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, + 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, + 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, + 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, + 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, + 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, + 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + }; + + u8 c, err = 0; + int i; + + for (i = 0; i < 2 * 13; i += 2) { + err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; + c = (biphase_tbl[p[i + 1]] & 0xf) | + ((biphase_tbl[p[i]] & 0xf) << 4); + dst[i / 2] = c; + } + + return err & 0xf0; +} + +int cx18_av_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + struct cx18_av_state *state = &cx->av_state; + static const u16 lcr2vbi[] = { + 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_WSS_625, 0, /* 4 */ + V4L2_SLICED_CAPTION_525, /* 6 */ + 0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */ + 0, 0, 0, 0 + }; + int is_pal = !(state->std & V4L2_STD_525_60); + int i; + + memset(svbi->service_lines, 0, sizeof(svbi->service_lines)); + svbi->service_set = 0; + + /* we're done if raw VBI is active */ + if ((cx18_av_read(cx, 0x404) & 0x10) == 0) + return 0; + + if (is_pal) { + for (i = 7; i <= 23; i++) { + u8 v = cx18_av_read(cx, 0x424 + i - 7); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= svbi->service_lines[0][i] | + svbi->service_lines[1][i]; + } + } else { + for (i = 10; i <= 21; i++) { + u8 v = cx18_av_read(cx, 0x424 + i - 10); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= svbi->service_lines[0][i] | + svbi->service_lines[1][i]; + } + } + return 0; +} + +int cx18_av_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + struct cx18_av_state *state = &cx->av_state; + + /* Setup standard */ + cx18_av_std_setup(cx); + + /* VBI Offset */ + cx18_av_write(cx, 0x47f, state->slicer_line_delay); + cx18_av_write(cx, 0x404, 0x2e); + return 0; +} + +int cx18_av_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + struct cx18_av_state *state = &cx->av_state; + int is_pal = !(state->std & V4L2_STD_525_60); + int i, x; + u8 lcr[24]; + + for (x = 0; x <= 23; x++) + lcr[x] = 0x00; + + /* Setup standard */ + cx18_av_std_setup(cx); + + /* Sliced VBI */ + cx18_av_write(cx, 0x404, 0x32); /* Ancillary data */ + cx18_av_write(cx, 0x406, 0x13); + cx18_av_write(cx, 0x47f, state->slicer_line_delay); + + /* Force impossible lines to 0 */ + if (is_pal) { + for (i = 0; i <= 6; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } else { + for (i = 0; i <= 9; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + + for (i = 22; i <= 23; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } + + /* Build register values for requested service lines */ + for (i = 7; i <= 23; i++) { + for (x = 0; x <= 1; x++) { + switch (svbi->service_lines[1-x][i]) { + case V4L2_SLICED_TELETEXT_B: + lcr[i] |= 1 << (4 * x); + break; + case V4L2_SLICED_WSS_625: + lcr[i] |= 4 << (4 * x); + break; + case V4L2_SLICED_CAPTION_525: + lcr[i] |= 6 << (4 * x); + break; + case V4L2_SLICED_VPS: + lcr[i] |= 9 << (4 * x); + break; + } + } + } + + if (is_pal) { + for (x = 1, i = 0x424; i <= 0x434; i++, x++) + cx18_av_write(cx, i, lcr[6 + x]); + } else { + for (x = 1, i = 0x424; i <= 0x430; i++, x++) + cx18_av_write(cx, i, lcr[9 + x]); + for (i = 0x431; i <= 0x434; i++) + cx18_av_write(cx, i, 0); + } + + cx18_av_write(cx, 0x43c, 0x16); + /* Should match vblank set in cx18_av_std_setup() */ + cx18_av_write(cx, 0x474, is_pal ? 38 : 26); + return 0; +} + +int cx18_av_decode_vbi_line(struct v4l2_subdev *sd, + struct v4l2_decode_vbi_line *vbi) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + struct cx18_av_state *state = &cx->av_state; + struct vbi_anc_data *anc = (struct vbi_anc_data *)vbi->p; + u8 *p; + int did, sdid, l, err = 0; + + /* + * Check for the ancillary data header for sliced VBI + */ + if (anc->preamble[0] || + anc->preamble[1] != 0xff || anc->preamble[2] != 0xff || + (anc->did != sliced_vbi_did[0] && + anc->did != sliced_vbi_did[1])) { + vbi->line = vbi->type = 0; + return 0; + } + + did = anc->did; + sdid = anc->sdid & 0xf; + l = anc->idid[0] & 0x3f; + l += state->slicer_line_offset; + p = anc->payload; + + /* Decode the SDID set by the slicer */ + switch (sdid) { + case 1: + sdid = V4L2_SLICED_TELETEXT_B; + break; + case 4: + sdid = V4L2_SLICED_WSS_625; + break; + case 6: + sdid = V4L2_SLICED_CAPTION_525; + err = !odd_parity(p[0]) || !odd_parity(p[1]); + break; + case 9: + sdid = V4L2_SLICED_VPS; + if (decode_vps(p, p) != 0) + err = 1; + break; + default: + sdid = 0; + err = 1; + break; + } + + vbi->type = err ? 0 : sdid; + vbi->line = err ? 0 : l; + vbi->is_second_field = err ? 0 : (did == sliced_vbi_did[1]); + vbi->p = p; + return 0; +} diff --git a/drivers/media/pci/cx18/cx18-cards.c b/drivers/media/pci/cx18/cx18-cards.c new file mode 100644 index 00000000..c07c849b --- /dev/null +++ b/drivers/media/pci/cx18/cx18-cards.c @@ -0,0 +1,638 @@ +/* + * cx18 functions to query card hardware + * + * Derived from ivtv-cards.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-cards.h" +#include "cx18-av-core.h" +#include "cx18-i2c.h" +#include + +#define V4L2_STD_PAL_SECAM (V4L2_STD_PAL|V4L2_STD_SECAM) + +/********************** card configuration *******************************/ + +/* usual i2c tuner addresses to probe */ +static struct cx18_card_tuner_i2c cx18_i2c_std = { + .radio = { I2C_CLIENT_END }, + .demod = { 0x43, I2C_CLIENT_END }, + .tv = { 0x61, 0x60, I2C_CLIENT_END }, +}; + +/* + * usual i2c tuner addresses to probe with additional demod address for + * an NXP TDA8295 at 0x42 (N.B. it can possibly be at 0x4b or 0x4c too). + */ +static struct cx18_card_tuner_i2c cx18_i2c_nxp = { + .radio = { I2C_CLIENT_END }, + .demod = { 0x42, 0x43, I2C_CLIENT_END }, + .tv = { 0x61, 0x60, I2C_CLIENT_END }, +}; + +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ + This keeps the PCI ID database up to date. Note that the entries + must be added under vendor 0x4444 (Conexant) as subsystem IDs. + New vendor IDs should still be added to the vendor ID list. */ + +/* Hauppauge HVR-1600 cards */ + +/* Note: for Hauppauge cards the tveeprom information is used instead + of PCI IDs */ +static const struct cx18_card cx18_card_hvr1600_esmt = { + .type = CX18_CARD_HVR_1600_ESMT, + .name = "Hauppauge HVR-1600", + .comment = "Simultaneous Digital and Analog TV capture supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_CS5345, + .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL | + CX18_HW_Z8F0811_IR_HAUP, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + { CX18_CARD_INPUT_LINE_IN1, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 }, + { CX18_CARD_INPUT_LINE_IN2, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 }, + .ddr = { + /* ESMT M13S128324A-5B memory */ + .chip_config = 0x003, + .refresh = 0x30c, + .timing1 = 0x44220e82, + .timing2 = 0x08, + .tune_lane = 0, + .initial_emrs = 0, + }, + .gpio_init.initial_value = 0x3001, + .gpio_init.direction = 0x3001, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3001, + .msecs_asserted = 10, + .msecs_recovery = 40, + .ir_reset_mask = 0x0001, + }, + .i2c = &cx18_i2c_std, +}; + +static const struct cx18_card cx18_card_hvr1600_s5h1411 = { + .type = CX18_CARD_HVR_1600_S5H1411, + .name = "Hauppauge HVR-1600", + .comment = "Simultaneous Digital and Analog TV capture supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_CS5345, + .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL | + CX18_HW_Z8F0811_IR_HAUP, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + { CX18_CARD_INPUT_LINE_IN1, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 }, + { CX18_CARD_INPUT_LINE_IN2, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 }, + .ddr = { + /* ESMT M13S128324A-5B memory */ + .chip_config = 0x003, + .refresh = 0x30c, + .timing1 = 0x44220e82, + .timing2 = 0x08, + .tune_lane = 0, + .initial_emrs = 0, + }, + .gpio_init.initial_value = 0x3801, + .gpio_init.direction = 0x3801, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3801, + .msecs_asserted = 10, + .msecs_recovery = 40, + .ir_reset_mask = 0x0001, + }, + .i2c = &cx18_i2c_nxp, +}; + +static const struct cx18_card cx18_card_hvr1600_samsung = { + .type = CX18_CARD_HVR_1600_SAMSUNG, + .name = "Hauppauge HVR-1600 (Preproduction)", + .comment = "Simultaneous Digital and Analog TV capture supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_CS5345, + .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL | + CX18_HW_Z8F0811_IR_HAUP, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + { CX18_CARD_INPUT_LINE_IN1, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 }, + { CX18_CARD_INPUT_LINE_IN2, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 }, + .ddr = { + /* Samsung K4D263238G-VC33 memory */ + .chip_config = 0x003, + .refresh = 0x30c, + .timing1 = 0x23230b73, + .timing2 = 0x08, + .tune_lane = 0, + .initial_emrs = 2, + }, + .gpio_init.initial_value = 0x3001, + .gpio_init.direction = 0x3001, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3001, + .msecs_asserted = 10, + .msecs_recovery = 40, + .ir_reset_mask = 0x0001, + }, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Compro VideoMate H900: note that this card is analog only! */ + +static const struct cx18_card_pci_info cx18_pci_h900[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_h900 = { + .type = CX18_CARD_COMPRO_H900, + .name = "Compro VideoMate H900", + .comment = "Analog TV capture supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, + CX18_AV_AUDIO_SERIAL1, 0 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO_SERIAL1, 0 }, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .ddr = { + /* EtronTech EM6A9160TS-5G memory */ + .chip_config = 0x50003, + .refresh = 0x753, + .timing1 = 0x24330e84, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 0, + }, + .xceive_pin = 15, + .pci_list = cx18_pci_h900, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Yuan MPC718: not working at the moment! */ + +static const struct cx18_card_pci_info cx18_pci_mpc718[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_YUAN, 0x0718 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_mpc718 = { + .type = CX18_CARD_YUAN_MPC718, + .name = "Yuan MPC718 MiniPCI DVB-T/Analog", + .comment = "Experimenters needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + { CX18_CARD_INPUT_SVIDEO2, 2, + CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, + }, + .tuners = { + /* XC3028 tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + /* FIXME - the FM radio is just a guess and driver doesn't use SIF */ + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, + .ddr = { + /* Hynix HY5DU283222B DDR RAM */ + .chip_config = 0x303, + .refresh = 0x3bd, + .timing1 = 0x36320966, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 2, + }, + .gpio_init.initial_value = 0x1, + .gpio_init.direction = 0x3, + /* FIXME - these GPIO's are just guesses */ + .gpio_audio_input = { .mask = 0x3, + .tuner = 0x1, + .linein = 0x3, + .radio = 0x1 }, + .xceive_pin = 0, + .pci_list = cx18_pci_mpc718, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* GoTView PCI */ + +static const struct cx18_card_pci_info cx18_pci_gotview_dvd3[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_GOTVIEW, 0x3343 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_gotview_dvd3 = { + .type = CX18_CARD_GOTVIEW_PCI_DVD3, + .name = "GoTView PCI DVD3 Hybrid", + .comment = "Experimenters needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + { CX18_CARD_INPUT_SVIDEO2, 2, + CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, + }, + .tuners = { + /* XC3028 tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + /* FIXME - the FM radio is just a guess and driver doesn't use SIF */ + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, + .ddr = { + /* Hynix HY5DU283222B DDR RAM */ + .chip_config = 0x303, + .refresh = 0x3bd, + .timing1 = 0x36320966, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 2, + }, + .gpio_init.initial_value = 0x1, + .gpio_init.direction = 0x3, + + .gpio_audio_input = { .mask = 0x3, + .tuner = 0x1, + .linein = 0x2, + .radio = 0x1 }, + .xceive_pin = 0, + .pci_list = cx18_pci_gotview_dvd3, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Conexant Raptor PAL/SECAM: note that this card is analog only! */ + +static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_CONEXANT, 0x0009 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_cnxt_raptor_pal = { + .type = CX18_CARD_CNXT_RAPTOR_PAL, + .name = "Conexant Raptor PAL/SECAM", + .comment = "Analog TV capture supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + { CX18_CARD_INPUT_SVIDEO2, 2, + CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, + }, + .tuners = { + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 2 }, + .ddr = { + /* MT 46V16M16 memory */ + .chip_config = 0x50306, + .refresh = 0x753, + .timing1 = 0x33220953, + .timing2 = 0x09, + .tune_lane = 0, + .initial_emrs = 0, + }, + .gpio_init.initial_value = 0x1002, + .gpio_init.direction = 0xf002, + .gpio_audio_input = { .mask = 0xf002, + .tuner = 0x1002, /* LED D1 Tuner AF */ + .linein = 0x2000, /* LED D2 Line In 1 */ + .radio = 0x4002 }, /* LED D3 Tuner AF */ + .pci_list = cx18_pci_cnxt_raptor_pal, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Toshiba Qosmio laptop internal DVB-T/Analog Hybrid Tuner */ + +static const struct cx18_card_pci_info cx18_pci_toshiba_qosmio_dvbt[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_TOSHIBA, 0x0110 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = { + .type = CX18_CARD_TOSHIBA_QOSMIO_DVBT, + .name = "Toshiba Qosmio DVB-T/Analog", + .comment = "Experimenters and photos needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE6 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + }, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .ddr = { + .chip_config = 0x202, + .refresh = 0x3bb, + .timing1 = 0x33320a63, + .timing2 = 0x0a, + .tune_lane = 0, + .initial_emrs = 0x42, + }, + .xceive_pin = 15, + .pci_list = cx18_pci_toshiba_qosmio_dvbt, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Leadtek WinFast PVR2100 */ + +static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, /* PVR2100 */ + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_leadtek_pvr2100 = { + .type = CX18_CARD_LEADTEK_PVR2100, + .name = "Leadtek WinFast PVR2100", + .comment = "Experimenters and photos needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX | + CX18_HW_GPIO_RESET_CTRL, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + }, + .tuners = { + /* XC2028 tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, + .ddr = { + /* Pointer to proper DDR config values provided by Terry Wu */ + .chip_config = 0x303, + .refresh = 0x3bb, + .timing1 = 0x24220e83, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 0x2, + }, + .gpio_init.initial_value = 0x6, + .gpio_init.direction = 0x7, + .gpio_audio_input = { .mask = 0x7, + .tuner = 0x6, .linein = 0x2, .radio = 0x2 }, + .xceive_pin = 1, + .pci_list = cx18_pci_leadtek_pvr2100, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Leadtek WinFast DVR3100 H */ + +static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */ + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_leadtek_dvr3100h = { + .type = CX18_CARD_LEADTEK_DVR3100H, + .name = "Leadtek WinFast DVR3100 H", + .comment = "Simultaneous DVB-T and Analog capture supported,\n" + "\texcept when capturing Analog from the antenna input.\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX | + CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + }, + .tuners = { + /* XC3028 tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, + .ddr = { + /* Pointer to proper DDR config values provided by Terry Wu */ + .chip_config = 0x303, + .refresh = 0x3bb, + .timing1 = 0x24220e83, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 0x2, + }, + .gpio_init.initial_value = 0x6, + .gpio_init.direction = 0x7, + .gpio_audio_input = { .mask = 0x7, + .tuner = 0x6, .linein = 0x2, .radio = 0x2 }, + .xceive_pin = 1, + .pci_list = cx18_pci_leadtek_dvr3100h, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +static const struct cx18_card *cx18_card_list[] = { + &cx18_card_hvr1600_esmt, + &cx18_card_hvr1600_samsung, + &cx18_card_h900, + &cx18_card_mpc718, + &cx18_card_cnxt_raptor_pal, + &cx18_card_toshiba_qosmio_dvbt, + &cx18_card_leadtek_pvr2100, + &cx18_card_leadtek_dvr3100h, + &cx18_card_gotview_dvd3, + &cx18_card_hvr1600_s5h1411 +}; + +const struct cx18_card *cx18_get_card(u16 index) +{ + if (index >= ARRAY_SIZE(cx18_card_list)) + return NULL; + return cx18_card_list[index]; +} + +int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input) +{ + const struct cx18_card_video_input *card_input = + cx->card->video_inputs + index; + static const char * const input_strs[] = { + "Tuner 1", + "S-Video 1", + "S-Video 2", + "Composite 1", + "Composite 2", + "Component 1" + }; + + if (index >= cx->nof_inputs) + return -EINVAL; + input->index = index; + strlcpy(input->name, input_strs[card_input->video_type - 1], + sizeof(input->name)); + input->type = (card_input->video_type == CX18_CARD_INPUT_VID_TUNER ? + V4L2_INPUT_TYPE_TUNER : V4L2_INPUT_TYPE_CAMERA); + input->audioset = (1 << cx->nof_audio_inputs) - 1; + input->std = (input->type == V4L2_INPUT_TYPE_TUNER) ? + cx->tuner_std : V4L2_STD_ALL; + return 0; +} + +int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *audio) +{ + const struct cx18_card_audio_input *aud_input = + cx->card->audio_inputs + index; + static const char * const input_strs[] = { + "Tuner 1", + "Line In 1", + "Line In 2" + }; + + memset(audio, 0, sizeof(*audio)); + if (index >= cx->nof_audio_inputs) + return -EINVAL; + strlcpy(audio->name, input_strs[aud_input->audio_type - 1], + sizeof(audio->name)); + audio->index = index; + audio->capability = V4L2_AUDCAP_STEREO; + return 0; +} diff --git a/drivers/media/pci/cx18/cx18-cards.h b/drivers/media/pci/cx18/cx18-cards.h new file mode 100644 index 00000000..add7391e --- /dev/null +++ b/drivers/media/pci/cx18/cx18-cards.h @@ -0,0 +1,157 @@ +/* + * cx18 functions to query card hardware + * + * Derived from ivtv-cards.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* hardware flags */ +#define CX18_HW_TUNER (1 << 0) +#define CX18_HW_TVEEPROM (1 << 1) +#define CX18_HW_CS5345 (1 << 2) +#define CX18_HW_DVB (1 << 3) +#define CX18_HW_418_AV (1 << 4) +#define CX18_HW_GPIO_MUX (1 << 5) +#define CX18_HW_GPIO_RESET_CTRL (1 << 6) +#define CX18_HW_Z8F0811_IR_TX_HAUP (1 << 7) +#define CX18_HW_Z8F0811_IR_RX_HAUP (1 << 8) +#define CX18_HW_Z8F0811_IR_HAUP (CX18_HW_Z8F0811_IR_RX_HAUP | \ + CX18_HW_Z8F0811_IR_TX_HAUP) + +#define CX18_HW_IR_ANY (CX18_HW_Z8F0811_IR_RX_HAUP | \ + CX18_HW_Z8F0811_IR_TX_HAUP) + +/* video inputs */ +#define CX18_CARD_INPUT_VID_TUNER 1 +#define CX18_CARD_INPUT_SVIDEO1 2 +#define CX18_CARD_INPUT_SVIDEO2 3 +#define CX18_CARD_INPUT_COMPOSITE1 4 +#define CX18_CARD_INPUT_COMPOSITE2 5 +#define CX18_CARD_INPUT_COMPONENT1 6 + +/* audio inputs */ +#define CX18_CARD_INPUT_AUD_TUNER 1 +#define CX18_CARD_INPUT_LINE_IN1 2 +#define CX18_CARD_INPUT_LINE_IN2 3 + +#define CX18_CARD_MAX_VIDEO_INPUTS 6 +#define CX18_CARD_MAX_AUDIO_INPUTS 3 +#define CX18_CARD_MAX_TUNERS 2 + +/* V4L2 capability aliases */ +#define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | \ + V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE) + +struct cx18_card_video_input { + u8 video_type; /* video input type */ + u8 audio_index; /* index in cx18_card_audio_input array */ + u32 video_input; /* hardware video input */ +}; + +struct cx18_card_audio_input { + u8 audio_type; /* audio input type */ + u32 audio_input; /* hardware audio input */ + u16 muxer_input; /* hardware muxer input for boards with a + multiplexer chip */ +}; + +struct cx18_card_pci_info { + u16 device; + u16 subsystem_vendor; + u16 subsystem_device; +}; + +/* GPIO definitions */ + +/* The mask is the set of bits used by the operation */ + +struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */ + u32 direction; /* DIR setting. Leave to 0 if no init is needed */ + u32 initial_value; +}; + +struct cx18_gpio_i2c_slave_reset { + u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */ + u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */ + int msecs_asserted; /* time period reset must remain asserted */ + int msecs_recovery; /* time after deassert for chips to be ready */ + u32 ir_reset_mask; /* GPIO to reset the Zilog Z8F0811 IR contoller */ +}; + +struct cx18_gpio_audio_input { /* select tuner/line in input */ + u32 mask; /* leave to 0 if not supported */ + u32 tuner; + u32 linein; + u32 radio; +}; + +struct cx18_card_tuner { + v4l2_std_id std; /* standard for which the tuner is suitable */ + int tuner; /* tuner ID (from tuner.h) */ +}; + +struct cx18_card_tuner_i2c { + unsigned short radio[2];/* radio tuner i2c address to probe */ + unsigned short demod[3];/* demodulator i2c address to probe */ + unsigned short tv[4]; /* tv tuner i2c addresses to probe */ +}; + +struct cx18_ddr { /* DDR config data */ + u32 chip_config; + u32 refresh; + u32 timing1; + u32 timing2; + u32 tune_lane; + u32 initial_emrs; +}; + +/* for card information/parameters */ +struct cx18_card { + int type; + char *name; + char *comment; + u32 v4l2_capabilities; + u32 hw_audio_ctrl; /* hardware used for the V4L2 controls (only + 1 dev allowed currently) */ + u32 hw_muxer; /* hardware used to multiplex audio input */ + u32 hw_all; /* all hardware used by the board */ + struct cx18_card_video_input video_inputs[CX18_CARD_MAX_VIDEO_INPUTS]; + struct cx18_card_audio_input audio_inputs[CX18_CARD_MAX_AUDIO_INPUTS]; + struct cx18_card_audio_input radio_input; + + /* GPIO card-specific settings */ + u8 xceive_pin; /* XCeive tuner GPIO reset pin */ + struct cx18_gpio_init gpio_init; + struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset; + struct cx18_gpio_audio_input gpio_audio_input; + + struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS]; + struct cx18_card_tuner_i2c *i2c; + + struct cx18_ddr ddr; + + /* list of device and subsystem vendor/devices that + correspond to this card type. */ + const struct cx18_card_pci_info *pci_list; +}; + +int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input); +int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *input); +const struct cx18_card *cx18_get_card(u16 index); diff --git a/drivers/media/pci/cx18/cx18-controls.c b/drivers/media/pci/cx18/cx18-controls.c new file mode 100644 index 00000000..282a3d29 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-controls.c @@ -0,0 +1,131 @@ +/* + * cx18 ioctl control functions + * + * Derived from ivtv-controls.c + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ +#include +#include + +#include "cx18-driver.h" +#include "cx18-cards.h" +#include "cx18-ioctl.h" +#include "cx18-audio.h" +#include "cx18-mailbox.h" +#include "cx18-controls.h" + +static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) +{ + struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); + int type = cxhdl->stream_type->val; + + if (atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + + if (fmt != V4L2_MPEG_STREAM_VBI_FMT_IVTV || + !(type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS || + type == V4L2_MPEG_STREAM_TYPE_MPEG2_DVD || + type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) { + /* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */ + cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE; + CX18_DEBUG_INFO("disabled insertion of sliced VBI data into " + "the MPEG stream\n"); + return 0; + } + + /* Allocate sliced VBI buffers if needed. */ + if (cx->vbi.sliced_mpeg_data[0] == NULL) { + int i; + + for (i = 0; i < CX18_VBI_FRAMES; i++) { + cx->vbi.sliced_mpeg_data[i] = + kmalloc(CX18_SLICED_MPEG_DATA_BUFSZ, GFP_KERNEL); + if (cx->vbi.sliced_mpeg_data[i] == NULL) { + while (--i >= 0) { + kfree(cx->vbi.sliced_mpeg_data[i]); + cx->vbi.sliced_mpeg_data[i] = NULL; + } + cx->vbi.insert_mpeg = + V4L2_MPEG_STREAM_VBI_FMT_NONE; + CX18_WARN("Unable to allocate buffers for " + "sliced VBI data insertion\n"); + return -ENOMEM; + } + } + } + + cx->vbi.insert_mpeg = fmt; + CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS," + "when sliced VBI is enabled\n"); + + /* + * If our current settings have no lines set for capture, store a valid, + * default set of service lines to capture, in our current settings. + */ + if (cx18_get_service_set(cx->vbi.sliced_in) == 0) { + if (cx->is_60hz) + cx->vbi.sliced_in->service_set = + V4L2_SLICED_CAPTION_525; + else + cx->vbi.sliced_in->service_set = V4L2_SLICED_WSS_625; + cx18_expand_service_set(cx->vbi.sliced_in, cx->is_50hz); + } + return 0; +} + +static int cx18_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val) +{ + struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); + int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; + struct v4l2_mbus_framefmt fmt; + + /* fix videodecoder resolution */ + fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1); + fmt.height = cxhdl->height; + fmt.code = V4L2_MBUS_FMT_FIXED; + v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &fmt); + return 0; +} + +static int cx18_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx) +{ + static const u32 freqs[3] = { 44100, 48000, 32000 }; + struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); + + /* The audio clock of the digitizer must match the codec sample + rate otherwise you get some very strange effects. */ + if (idx < ARRAY_SIZE(freqs)) + cx18_call_all(cx, audio, s_clock_freq, freqs[idx]); + return 0; +} + +static int cx18_s_audio_mode(struct cx2341x_handler *cxhdl, u32 val) +{ + struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); + + cx->dualwatch_stereo_mode = val; + return 0; +} + +struct cx2341x_handler_ops cx18_cxhdl_ops = { + .s_audio_mode = cx18_s_audio_mode, + .s_audio_sampling_freq = cx18_s_audio_sampling_freq, + .s_video_encoding = cx18_s_video_encoding, + .s_stream_vbi_fmt = cx18_s_stream_vbi_fmt, +}; diff --git a/drivers/media/pci/cx18/cx18-controls.h b/drivers/media/pci/cx18/cx18-controls.h new file mode 100644 index 00000000..cb5dfc7b --- /dev/null +++ b/drivers/media/pci/cx18/cx18-controls.h @@ -0,0 +1,24 @@ +/* + * cx18 ioctl control functions + * + * Derived from ivtv-controls.h + * + * Copyright (C) 2007 Hans Verkuil + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +extern struct cx2341x_handler_ops cx18_cxhdl_ops; diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c new file mode 100644 index 00000000..018cb904 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-driver.c @@ -0,0 +1,1368 @@ +/* + * cx18 driver initialization and card probing + * + * Derived from ivtv-driver.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-version.h" +#include "cx18-cards.h" +#include "cx18-i2c.h" +#include "cx18-irq.h" +#include "cx18-gpio.h" +#include "cx18-firmware.h" +#include "cx18-queue.h" +#include "cx18-streams.h" +#include "cx18-av-core.h" +#include "cx18-scb.h" +#include "cx18-mailbox.h" +#include "cx18-ioctl.h" +#include "cx18-controls.h" +#include "tuner-xc2028.h" +#include +#include + +/* If you have already X v4l cards, then set this to X. This way + the device numbers stay matched. Example: you have a WinTV card + without radio and a Compro H900 with. Normally this would give a + video1 device together with a radio0 device for the Compro. By + setting this to 1 you ensure that radio0 is now also radio1. */ +int cx18_first_minor; + +/* Callback for registering extensions */ +int (*cx18_ext_init)(struct cx18 *); +EXPORT_SYMBOL(cx18_ext_init); + +/* add your revision and whatnot here */ +static struct pci_device_id cx18_pci_tbl[] = { + {PCI_VENDOR_ID_CX, PCI_DEVICE_ID_CX23418, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, cx18_pci_tbl); + +static atomic_t cx18_instance = ATOMIC_INIT(0); + +/* Parameter declarations */ +static int cardtype[CX18_MAX_CARDS]; +static int tuner[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static unsigned cardtype_c = 1; +static unsigned tuner_c = 1; +static unsigned radio_c = 1; +static char pal[] = "--"; +static char secam[] = "--"; +static char ntsc[] = "-"; + +/* Buffers */ +static int enc_ts_buffers = CX18_DEFAULT_ENC_TS_BUFFERS; +static int enc_mpg_buffers = CX18_DEFAULT_ENC_MPG_BUFFERS; +static int enc_idx_buffers = CX18_DEFAULT_ENC_IDX_BUFFERS; +static int enc_yuv_buffers = CX18_DEFAULT_ENC_YUV_BUFFERS; +static int enc_vbi_buffers = CX18_DEFAULT_ENC_VBI_BUFFERS; +static int enc_pcm_buffers = CX18_DEFAULT_ENC_PCM_BUFFERS; + +static int enc_ts_bufsize = CX18_DEFAULT_ENC_TS_BUFSIZE; +static int enc_mpg_bufsize = CX18_DEFAULT_ENC_MPG_BUFSIZE; +static int enc_idx_bufsize = CX18_DEFAULT_ENC_IDX_BUFSIZE; +static int enc_yuv_bufsize = CX18_DEFAULT_ENC_YUV_BUFSIZE; +static int enc_pcm_bufsize = CX18_DEFAULT_ENC_PCM_BUFSIZE; + +static int enc_ts_bufs = -1; +static int enc_mpg_bufs = -1; +static int enc_idx_bufs = CX18_MAX_FW_MDLS_PER_STREAM; +static int enc_yuv_bufs = -1; +static int enc_vbi_bufs = -1; +static int enc_pcm_bufs = -1; + + +static int cx18_pci_latency = 1; + +static int mmio_ndelay; +static int retry_mmio = 1; + +int cx18_debug; + +module_param_array(tuner, int, &tuner_c, 0644); +module_param_array(radio, int, &radio_c, 0644); +module_param_array(cardtype, int, &cardtype_c, 0644); +module_param_string(pal, pal, sizeof(pal), 0644); +module_param_string(secam, secam, sizeof(secam), 0644); +module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); +module_param_named(debug, cx18_debug, int, 0644); +module_param(mmio_ndelay, int, 0644); +module_param(retry_mmio, int, 0644); +module_param(cx18_pci_latency, int, 0644); +module_param(cx18_first_minor, int, 0644); + +module_param(enc_ts_buffers, int, 0644); +module_param(enc_mpg_buffers, int, 0644); +module_param(enc_idx_buffers, int, 0644); +module_param(enc_yuv_buffers, int, 0644); +module_param(enc_vbi_buffers, int, 0644); +module_param(enc_pcm_buffers, int, 0644); + +module_param(enc_ts_bufsize, int, 0644); +module_param(enc_mpg_bufsize, int, 0644); +module_param(enc_idx_bufsize, int, 0644); +module_param(enc_yuv_bufsize, int, 0644); +module_param(enc_pcm_bufsize, int, 0644); + +module_param(enc_ts_bufs, int, 0644); +module_param(enc_mpg_bufs, int, 0644); +module_param(enc_idx_bufs, int, 0644); +module_param(enc_yuv_bufs, int, 0644); +module_param(enc_vbi_bufs, int, 0644); +module_param(enc_pcm_bufs, int, 0644); + +MODULE_PARM_DESC(tuner, "Tuner type selection,\n" + "\t\t\tsee tuner.h for values"); +MODULE_PARM_DESC(radio, + "Enable or disable the radio. Use only if autodetection\n" + "\t\t\tfails. 0 = disable, 1 = enable"); +MODULE_PARM_DESC(cardtype, + "Only use this option if your card is not detected properly.\n" + "\t\tSpecify card type:\n" + "\t\t\t 1 = Hauppauge HVR 1600 (ESMT memory)\n" + "\t\t\t 2 = Hauppauge HVR 1600 (Samsung memory)\n" + "\t\t\t 3 = Compro VideoMate H900\n" + "\t\t\t 4 = Yuan MPC718\n" + "\t\t\t 5 = Conexant Raptor PAL/SECAM\n" + "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n" + "\t\t\t 7 = Leadtek WinFast PVR2100\n" + "\t\t\t 8 = Leadtek WinFast DVR3100 H\n" + "\t\t\t 9 = GoTView PCI DVD3 Hybrid\n" + "\t\t\t 10 = Hauppauge HVR 1600 (S5H1411)\n" + "\t\t\t 0 = Autodetect (default)\n" + "\t\t\t-1 = Ignore this card\n\t\t"); +MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60"); +MODULE_PARM_DESC(secam, "Set SECAM standard: B, G, H, D, K, L, LC"); +MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J, K"); +MODULE_PARM_DESC(debug, + "Debug level (bitmask). Default: 0\n" + "\t\t\t 1/0x0001: warning\n" + "\t\t\t 2/0x0002: info\n" + "\t\t\t 4/0x0004: mailbox\n" + "\t\t\t 8/0x0008: dma\n" + "\t\t\t 16/0x0010: ioctl\n" + "\t\t\t 32/0x0020: file\n" + "\t\t\t 64/0x0040: i2c\n" + "\t\t\t128/0x0080: irq\n" + "\t\t\t256/0x0100: high volume\n"); +MODULE_PARM_DESC(cx18_pci_latency, + "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n" + "\t\t\tDefault: Yes"); +MODULE_PARM_DESC(retry_mmio, + "(Deprecated) MMIO writes are now always checked and retried\n" + "\t\t\tEffectively: 1 [Yes]"); +MODULE_PARM_DESC(mmio_ndelay, + "(Deprecated) MMIO accesses are now never purposely delayed\n" + "\t\t\tEffectively: 0 ns"); +MODULE_PARM_DESC(enc_ts_buffers, + "Encoder TS buffer memory (MB). (enc_ts_bufs can override)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_TS_BUFFERS)); +MODULE_PARM_DESC(enc_ts_bufsize, + "Size of an encoder TS buffer (kB)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_TS_BUFSIZE)); +MODULE_PARM_DESC(enc_ts_bufs, + "Number of encoder TS buffers\n" + "\t\t\tDefault is computed from other enc_ts_* parameters"); +MODULE_PARM_DESC(enc_mpg_buffers, + "Encoder MPG buffer memory (MB). (enc_mpg_bufs can override)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFFERS)); +MODULE_PARM_DESC(enc_mpg_bufsize, + "Size of an encoder MPG buffer (kB)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFSIZE)); +MODULE_PARM_DESC(enc_mpg_bufs, + "Number of encoder MPG buffers\n" + "\t\t\tDefault is computed from other enc_mpg_* parameters"); +MODULE_PARM_DESC(enc_idx_buffers, + "(Deprecated) Encoder IDX buffer memory (MB)\n" + "\t\t\tIgnored, except 0 disables IDX buffer allocations\n" + "\t\t\tDefault: 1 [Enabled]"); +MODULE_PARM_DESC(enc_idx_bufsize, + "Size of an encoder IDX buffer (kB)\n" + "\t\t\tAllowed values are multiples of 1.5 kB rounded up\n" + "\t\t\t(multiples of size required for 64 index entries)\n" + "\t\t\tDefault: 2"); +MODULE_PARM_DESC(enc_idx_bufs, + "Number of encoder IDX buffers\n" + "\t\t\tDefault: " __stringify(CX18_MAX_FW_MDLS_PER_STREAM)); +MODULE_PARM_DESC(enc_yuv_buffers, + "Encoder YUV buffer memory (MB). (enc_yuv_bufs can override)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_YUV_BUFFERS)); +MODULE_PARM_DESC(enc_yuv_bufsize, + "Size of an encoder YUV buffer (kB)\n" + "\t\t\tAllowed values are multiples of 33.75 kB rounded up\n" + "\t\t\t(multiples of size required for 32 screen lines)\n" + "\t\t\tDefault: 102"); +MODULE_PARM_DESC(enc_yuv_bufs, + "Number of encoder YUV buffers\n" + "\t\t\tDefault is computed from other enc_yuv_* parameters"); +MODULE_PARM_DESC(enc_vbi_buffers, + "Encoder VBI buffer memory (MB). (enc_vbi_bufs can override)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_VBI_BUFFERS)); +MODULE_PARM_DESC(enc_vbi_bufs, + "Number of encoder VBI buffers\n" + "\t\t\tDefault is computed from enc_vbi_buffers"); +MODULE_PARM_DESC(enc_pcm_buffers, + "Encoder PCM buffer memory (MB). (enc_pcm_bufs can override)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFFERS)); +MODULE_PARM_DESC(enc_pcm_bufsize, + "Size of an encoder PCM buffer (kB)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFSIZE)); +MODULE_PARM_DESC(enc_pcm_bufs, + "Number of encoder PCM buffers\n" + "\t\t\tDefault is computed from other enc_pcm_* parameters"); + +MODULE_PARM_DESC(cx18_first_minor, + "Set device node number assigned to first card"); + +MODULE_AUTHOR("Hans Verkuil"); +MODULE_DESCRIPTION("CX23418 driver"); +MODULE_SUPPORTED_DEVICE("CX23418 MPEG2 encoder"); +MODULE_LICENSE("GPL"); + +MODULE_VERSION(CX18_VERSION); + +#if defined(CONFIG_MODULES) && defined(MODULE) +static void request_module_async(struct work_struct *work) +{ + struct cx18 *dev = container_of(work, struct cx18, request_module_wk); + + /* Make sure cx18-alsa module is loaded */ + request_module("cx18-alsa"); + + /* Initialize cx18-alsa for this instance of the cx18 device */ + if (cx18_ext_init != NULL) + cx18_ext_init(dev); +} + +static void request_modules(struct cx18 *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_modules(struct cx18 *dev) +{ + flush_work(&dev->request_module_wk); +} +#else +#define request_modules(dev) +#define flush_request_modules(dev) +#endif /* CONFIG_MODULES */ + +/* Generic utility functions */ +int cx18_msleep_timeout(unsigned int msecs, int intr) +{ + long int timeout = msecs_to_jiffies(msecs); + int sig; + + do { + set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); + timeout = schedule_timeout(timeout); + sig = intr ? signal_pending(current) : 0; + } while (!sig && timeout); + return sig; +} + +/* Release ioremapped memory */ +static void cx18_iounmap(struct cx18 *cx) +{ + if (cx == NULL) + return; + + /* Release io memory */ + if (cx->enc_mem != NULL) { + CX18_DEBUG_INFO("releasing enc_mem\n"); + iounmap(cx->enc_mem); + cx->enc_mem = NULL; + } +} + +static void cx18_eeprom_dump(struct cx18 *cx, unsigned char *eedata, int len) +{ + int i; + + CX18_INFO("eeprom dump:\n"); + for (i = 0; i < len; i++) { + if (0 == (i % 16)) + CX18_INFO("eeprom %02x:", i); + printk(KERN_CONT " %02x", eedata[i]); + if (15 == (i % 16)) + printk(KERN_CONT "\n"); + } +} + +/* Hauppauge card? get values from tveeprom */ +void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv) +{ + struct i2c_client *c; + u8 eedata[256]; + + memset(tv, 0, sizeof(*tv)); + + c = kzalloc(sizeof(*c), GFP_KERNEL); + if (!c) + return; + + strlcpy(c->name, "cx18 tveeprom tmp", sizeof(c->name)); + c->adapter = &cx->i2c_adap[0]; + c->addr = 0xa0 >> 1; + + if (tveeprom_read(c, eedata, sizeof(eedata))) + goto ret; + + switch (cx->card->type) { + case CX18_CARD_HVR_1600_ESMT: + case CX18_CARD_HVR_1600_SAMSUNG: + case CX18_CARD_HVR_1600_S5H1411: + tveeprom_hauppauge_analog(c, tv, eedata); + break; + case CX18_CARD_YUAN_MPC718: + case CX18_CARD_GOTVIEW_PCI_DVD3: + tv->model = 0x718; + cx18_eeprom_dump(cx, eedata, sizeof(eedata)); + CX18_INFO("eeprom PCI ID: %02x%02x:%02x%02x\n", + eedata[2], eedata[1], eedata[4], eedata[3]); + break; + default: + tv->model = 0xffffffff; + cx18_eeprom_dump(cx, eedata, sizeof(eedata)); + break; + } + +ret: + kfree(c); +} + +static void cx18_process_eeprom(struct cx18 *cx) +{ + struct tveeprom tv; + + cx18_read_eeprom(cx, &tv); + + /* Many thanks to Steven Toth from Hauppauge for providing the + model numbers */ + /* Note: the Samsung memory models cannot be reliably determined + from the model number. Use the cardtype module option if you + have one of these preproduction models. */ + switch (tv.model) { + case 74301: /* Retail models */ + case 74321: + case 74351: /* OEM models */ + case 74361: + /* Digital side is s5h1411/tda18271 */ + cx->card = cx18_get_card(CX18_CARD_HVR_1600_S5H1411); + break; + case 74021: /* Retail models */ + case 74031: + case 74041: + case 74141: + case 74541: /* OEM models */ + case 74551: + case 74591: + case 74651: + case 74691: + case 74751: + case 74891: + /* Digital side is s5h1409/mxl5005s */ + cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); + break; + case 0x718: + return; + case 0xffffffff: + CX18_INFO("Unknown EEPROM encoding\n"); + return; + case 0: + CX18_ERR("Invalid EEPROM\n"); + return; + default: + CX18_ERR("Unknown model %d, defaulting to original HVR-1600 " + "(cardtype=1)\n", tv.model); + cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); + break; + } + + cx->v4l2_cap = cx->card->v4l2_capabilities; + cx->card_name = cx->card->name; + cx->card_i2c = cx->card->i2c; + + CX18_INFO("Autodetected %s\n", cx->card_name); + + if (tv.tuner_type == TUNER_ABSENT) + CX18_ERR("tveeprom cannot autodetect tuner!\n"); + + if (cx->options.tuner == -1) + cx->options.tuner = tv.tuner_type; + if (cx->options.radio == -1) + cx->options.radio = (tv.has_radio != 0); + + if (cx->std != 0) + /* user specified tuner standard */ + return; + + /* autodetect tuner standard */ +#define TVEEPROM_TUNER_FORMAT_ALL (V4L2_STD_B | V4L2_STD_GH | \ + V4L2_STD_MN | \ + V4L2_STD_PAL_I | \ + V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC | \ + V4L2_STD_DK) + if ((tv.tuner_formats & TVEEPROM_TUNER_FORMAT_ALL) + == TVEEPROM_TUNER_FORMAT_ALL) { + CX18_DEBUG_INFO("Worldwide tuner detected\n"); + cx->std = V4L2_STD_ALL; + } else if (tv.tuner_formats & V4L2_STD_PAL) { + CX18_DEBUG_INFO("PAL tuner detected\n"); + cx->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H; + } else if (tv.tuner_formats & V4L2_STD_NTSC) { + CX18_DEBUG_INFO("NTSC tuner detected\n"); + cx->std |= V4L2_STD_NTSC_M; + } else if (tv.tuner_formats & V4L2_STD_SECAM) { + CX18_DEBUG_INFO("SECAM tuner detected\n"); + cx->std |= V4L2_STD_SECAM_L; + } else { + CX18_INFO("No tuner detected, default to NTSC-M\n"); + cx->std |= V4L2_STD_NTSC_M; + } +} + +static v4l2_std_id cx18_parse_std(struct cx18 *cx) +{ + switch (pal[0]) { + case '6': + return V4L2_STD_PAL_60; + case 'b': + case 'B': + case 'g': + case 'G': + return V4L2_STD_PAL_BG; + case 'h': + case 'H': + return V4L2_STD_PAL_H; + case 'n': + case 'N': + if (pal[1] == 'c' || pal[1] == 'C') + return V4L2_STD_PAL_Nc; + return V4L2_STD_PAL_N; + case 'i': + case 'I': + return V4L2_STD_PAL_I; + case 'd': + case 'D': + case 'k': + case 'K': + return V4L2_STD_PAL_DK; + case 'M': + case 'm': + return V4L2_STD_PAL_M; + case '-': + break; + default: + CX18_WARN("pal= argument not recognised\n"); + return 0; + } + + switch (secam[0]) { + case 'b': + case 'B': + case 'g': + case 'G': + case 'h': + case 'H': + return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H; + case 'd': + case 'D': + case 'k': + case 'K': + return V4L2_STD_SECAM_DK; + case 'l': + case 'L': + if (secam[1] == 'C' || secam[1] == 'c') + return V4L2_STD_SECAM_LC; + return V4L2_STD_SECAM_L; + case '-': + break; + default: + CX18_WARN("secam= argument not recognised\n"); + return 0; + } + + switch (ntsc[0]) { + case 'm': + case 'M': + return V4L2_STD_NTSC_M; + case 'j': + case 'J': + return V4L2_STD_NTSC_M_JP; + case 'k': + case 'K': + return V4L2_STD_NTSC_M_KR; + case '-': + break; + default: + CX18_WARN("ntsc= argument not recognised\n"); + return 0; + } + + /* no match found */ + return 0; +} + +static void cx18_process_options(struct cx18 *cx) +{ + int i, j; + + cx->options.megabytes[CX18_ENC_STREAM_TYPE_TS] = enc_ts_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control only */ + + cx->stream_buffers[CX18_ENC_STREAM_TYPE_TS] = enc_ts_bufs; + cx->stream_buffers[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_bufs; + cx->stream_buffers[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_bufs; + cx->stream_buffers[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_bufs; + cx->stream_buffers[CX18_ENC_STREAM_TYPE_VBI] = enc_vbi_bufs; + cx->stream_buffers[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_bufs; + cx->stream_buffers[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control, no data */ + + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_TS] = enc_ts_bufsize; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_bufsize; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_bufsize; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_bufsize; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_VBI] = vbi_active_samples * 36; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_bufsize; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control no data */ + + /* Ensure stream_buffers & stream_buf_size are valid */ + for (i = 0; i < CX18_MAX_STREAMS; i++) { + if (cx->stream_buffers[i] == 0 || /* User said 0 buffers */ + cx->options.megabytes[i] <= 0 || /* User said 0 MB total */ + cx->stream_buf_size[i] <= 0) { /* User said buf size 0 */ + cx->options.megabytes[i] = 0; + cx->stream_buffers[i] = 0; + cx->stream_buf_size[i] = 0; + continue; + } + /* + * YUV is a special case where the stream_buf_size needs to be + * an integral multiple of 33.75 kB (storage for 32 screens + * lines to maintain alignment in case of lost buffers). + * + * IDX is a special case where the stream_buf_size should be + * an integral multiple of 1.5 kB (storage for 64 index entries + * to maintain alignment in case of lost buffers). + * + */ + if (i == CX18_ENC_STREAM_TYPE_YUV) { + cx->stream_buf_size[i] *= 1024; + cx->stream_buf_size[i] -= + (cx->stream_buf_size[i] % CX18_UNIT_ENC_YUV_BUFSIZE); + + if (cx->stream_buf_size[i] < CX18_UNIT_ENC_YUV_BUFSIZE) + cx->stream_buf_size[i] = + CX18_UNIT_ENC_YUV_BUFSIZE; + } else if (i == CX18_ENC_STREAM_TYPE_IDX) { + cx->stream_buf_size[i] *= 1024; + cx->stream_buf_size[i] -= + (cx->stream_buf_size[i] % CX18_UNIT_ENC_IDX_BUFSIZE); + + if (cx->stream_buf_size[i] < CX18_UNIT_ENC_IDX_BUFSIZE) + cx->stream_buf_size[i] = + CX18_UNIT_ENC_IDX_BUFSIZE; + } + /* + * YUV and IDX are special cases where the stream_buf_size is + * now in bytes. + * VBI is a special case where the stream_buf_size is fixed + * and already in bytes + */ + if (i == CX18_ENC_STREAM_TYPE_VBI || + i == CX18_ENC_STREAM_TYPE_YUV || + i == CX18_ENC_STREAM_TYPE_IDX) { + if (cx->stream_buffers[i] < 0) { + cx->stream_buffers[i] = + cx->options.megabytes[i] * 1024 * 1024 + / cx->stream_buf_size[i]; + } else { + /* N.B. This might round down to 0 */ + cx->options.megabytes[i] = + cx->stream_buffers[i] + * cx->stream_buf_size[i]/(1024 * 1024); + } + } else { + /* All other streams have stream_buf_size in kB here */ + if (cx->stream_buffers[i] < 0) { + cx->stream_buffers[i] = + cx->options.megabytes[i] * 1024 + / cx->stream_buf_size[i]; + } else { + /* N.B. This might round down to 0 */ + cx->options.megabytes[i] = + cx->stream_buffers[i] + * cx->stream_buf_size[i] / 1024; + } + /* convert from kB to bytes */ + cx->stream_buf_size[i] *= 1024; + } + CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, " + "%d bytes\n", i, cx->options.megabytes[i], + cx->stream_buffers[i], cx->stream_buf_size[i]); + } + + cx->options.cardtype = cardtype[cx->instance]; + cx->options.tuner = tuner[cx->instance]; + cx->options.radio = radio[cx->instance]; + + cx->std = cx18_parse_std(cx); + if (cx->options.cardtype == -1) { + CX18_INFO("Ignore card\n"); + return; + } + cx->card = cx18_get_card(cx->options.cardtype - 1); + if (cx->card) + CX18_INFO("User specified %s card\n", cx->card->name); + else if (cx->options.cardtype != 0) + CX18_ERR("Unknown user specified type, trying to autodetect card\n"); + if (cx->card == NULL) { + if (cx->pci_dev->subsystem_vendor == CX18_PCI_ID_HAUPPAUGE) { + cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); + CX18_INFO("Autodetected Hauppauge card\n"); + } + } + if (cx->card == NULL) { + for (i = 0; (cx->card = cx18_get_card(i)); i++) { + if (cx->card->pci_list == NULL) + continue; + for (j = 0; cx->card->pci_list[j].device; j++) { + if (cx->pci_dev->device != + cx->card->pci_list[j].device) + continue; + if (cx->pci_dev->subsystem_vendor != + cx->card->pci_list[j].subsystem_vendor) + continue; + if (cx->pci_dev->subsystem_device != + cx->card->pci_list[j].subsystem_device) + continue; + CX18_INFO("Autodetected %s card\n", cx->card->name); + goto done; + } + } + } +done: + + if (cx->card == NULL) { + cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); + CX18_ERR("Unknown card: vendor/device: [%04x:%04x]\n", + cx->pci_dev->vendor, cx->pci_dev->device); + CX18_ERR(" subsystem vendor/device: [%04x:%04x]\n", + cx->pci_dev->subsystem_vendor, + cx->pci_dev->subsystem_device); + CX18_ERR("Defaulting to %s card\n", cx->card->name); + CX18_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n"); + CX18_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n"); + CX18_ERR("Prefix your subject line with [UNKNOWN CX18 CARD].\n"); + } + cx->v4l2_cap = cx->card->v4l2_capabilities; + cx->card_name = cx->card->name; + cx->card_i2c = cx->card->i2c; +} + +static int cx18_create_in_workq(struct cx18 *cx) +{ + snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in", + cx->v4l2_dev.name); + cx->in_work_queue = alloc_ordered_workqueue(cx->in_workq_name, 0); + if (cx->in_work_queue == NULL) { + CX18_ERR("Unable to create incoming mailbox handler thread\n"); + return -ENOMEM; + } + return 0; +} + +static void cx18_init_in_work_orders(struct cx18 *cx) +{ + int i; + for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++) { + cx->in_work_order[i].cx = cx; + cx->in_work_order[i].str = cx->epu_debug_str; + INIT_WORK(&cx->in_work_order[i].work, cx18_in_work_handler); + } +} + +/* Precondition: the cx18 structure has been memset to 0. Only + the dev and instance fields have been filled in. + No assumptions on the card type may be made here (see cx18_init_struct2 + for that). + */ +static int cx18_init_struct1(struct cx18 *cx) +{ + int ret; + + cx->base_addr = pci_resource_start(cx->pci_dev, 0); + + mutex_init(&cx->serialize_lock); + mutex_init(&cx->gpio_lock); + mutex_init(&cx->epu2apu_mb_lock); + mutex_init(&cx->epu2cpu_mb_lock); + + ret = cx18_create_in_workq(cx); + if (ret) + return ret; + + cx18_init_in_work_orders(cx); + + /* start counting open_id at 1 */ + cx->open_id = 1; + + /* Initial settings */ + cx->cxhdl.port = CX2341X_PORT_MEMORY; + cx->cxhdl.capabilities = CX2341X_CAP_HAS_TS | CX2341X_CAP_HAS_SLICED_VBI; + cx->cxhdl.ops = &cx18_cxhdl_ops; + cx->cxhdl.func = cx18_api_func; + cx->cxhdl.priv = &cx->streams[CX18_ENC_STREAM_TYPE_MPG]; + ret = cx2341x_handler_init(&cx->cxhdl, 50); + if (ret) + return ret; + cx->v4l2_dev.ctrl_handler = &cx->cxhdl.hdl; + + cx->temporal_strength = cx->cxhdl.video_temporal_filter->cur.val; + cx->spatial_strength = cx->cxhdl.video_spatial_filter->cur.val; + cx->filter_mode = cx->cxhdl.video_spatial_filter_mode->cur.val | + (cx->cxhdl.video_temporal_filter_mode->cur.val << 1) | + (cx->cxhdl.video_median_filter_type->cur.val << 2); + + init_waitqueue_head(&cx->cap_w); + init_waitqueue_head(&cx->mb_apu_waitq); + init_waitqueue_head(&cx->mb_cpu_waitq); + init_waitqueue_head(&cx->dma_waitq); + + /* VBI */ + cx->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; + cx->vbi.sliced_in = &cx->vbi.in.fmt.sliced; + + /* IVTV style VBI insertion into MPEG streams */ + INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_buf.list); + INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_mdl.list); + INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_mdl.buf_list); + list_add(&cx->vbi.sliced_mpeg_buf.list, + &cx->vbi.sliced_mpeg_mdl.buf_list); + return 0; +} + +/* Second initialization part. Here the card type has been + autodetected. */ +static void cx18_init_struct2(struct cx18 *cx) +{ + int i; + + for (i = 0; i < CX18_CARD_MAX_VIDEO_INPUTS; i++) + if (cx->card->video_inputs[i].video_type == 0) + break; + cx->nof_inputs = i; + for (i = 0; i < CX18_CARD_MAX_AUDIO_INPUTS; i++) + if (cx->card->audio_inputs[i].audio_type == 0) + break; + cx->nof_audio_inputs = i; + + /* Find tuner input */ + for (i = 0; i < cx->nof_inputs; i++) { + if (cx->card->video_inputs[i].video_type == + CX18_CARD_INPUT_VID_TUNER) + break; + } + if (i == cx->nof_inputs) + i = 0; + cx->active_input = i; + cx->audio_input = cx->card->video_inputs[i].audio_index; +} + +static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + u16 cmd; + unsigned char pci_latency; + + CX18_DEBUG_INFO("Enabling pci device\n"); + + if (pci_enable_device(pci_dev)) { + CX18_ERR("Can't enable device %d!\n", cx->instance); + return -EIO; + } + if (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) { + CX18_ERR("No suitable DMA available, card %d\n", cx->instance); + return -EIO; + } + if (!request_mem_region(cx->base_addr, CX18_MEM_SIZE, "cx18 encoder")) { + CX18_ERR("Cannot request encoder memory region, card %d\n", + cx->instance); + return -EIO; + } + + /* Enable bus mastering and memory mapped IO for the CX23418 */ + pci_read_config_word(pci_dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_write_config_word(pci_dev, PCI_COMMAND, cmd); + + cx->card_rev = pci_dev->revision; + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency); + + if (pci_latency < 64 && cx18_pci_latency) { + CX18_INFO("Unreasonably low latency timer, " + "setting to 64 (was %d)\n", pci_latency); + pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, 64); + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency); + } + + CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, " + "irq: %d, latency: %d, memory: 0x%llx\n", + cx->pci_dev->device, cx->card_rev, pci_dev->bus->number, + PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn), + cx->pci_dev->irq, pci_latency, (u64)cx->base_addr); + + return 0; +} + +static void cx18_init_subdevs(struct cx18 *cx) +{ + u32 hw = cx->card->hw_all; + u32 device; + int i; + + for (i = 0, device = 1; i < 32; i++, device <<= 1) { + + if (!(device & hw)) + continue; + + switch (device) { + case CX18_HW_DVB: + case CX18_HW_TVEEPROM: + /* These subordinate devices do not use probing */ + cx->hw_flags |= device; + break; + case CX18_HW_418_AV: + /* The A/V decoder gets probed earlier to set PLLs */ + /* Just note that the card uses it (i.e. has analog) */ + cx->hw_flags |= device; + break; + case CX18_HW_GPIO_RESET_CTRL: + /* + * The Reset Controller gets probed and added to + * hw_flags earlier for i2c adapter/bus initialization + */ + break; + case CX18_HW_GPIO_MUX: + if (cx18_gpio_register(cx, device) == 0) + cx->hw_flags |= device; + break; + default: + if (cx18_i2c_register(cx, i) == 0) + cx->hw_flags |= device; + break; + } + } + + if (cx->hw_flags & CX18_HW_418_AV) + cx->sd_av = cx18_find_hw(cx, CX18_HW_418_AV); + + if (cx->card->hw_muxer != 0) + cx->sd_extmux = cx18_find_hw(cx, cx->card->hw_muxer); +} + +static int cx18_probe(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + int retval = 0; + int i; + u32 devtype; + struct cx18 *cx; + + /* FIXME - module parameter arrays constrain max instances */ + i = atomic_inc_return(&cx18_instance) - 1; + if (i >= CX18_MAX_CARDS) { + printk(KERN_ERR "cx18: cannot manage card %d, driver has a " + "limit of 0 - %d\n", i, CX18_MAX_CARDS - 1); + return -ENOMEM; + } + + cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC); + if (cx == NULL) { + printk(KERN_ERR "cx18: cannot manage card %d, out of memory\n", + i); + return -ENOMEM; + } + cx->pci_dev = pci_dev; + cx->instance = i; + + retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev); + if (retval) { + printk(KERN_ERR "cx18: v4l2_device_register of card %d failed" + "\n", cx->instance); + kfree(cx); + return retval; + } + snprintf(cx->v4l2_dev.name, sizeof(cx->v4l2_dev.name), "cx18-%d", + cx->instance); + CX18_INFO("Initializing card %d\n", cx->instance); + + cx18_process_options(cx); + if (cx->options.cardtype == -1) { + retval = -ENODEV; + goto err; + } + + retval = cx18_init_struct1(cx); + if (retval) + goto err; + + CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr); + + /* PCI Device Setup */ + retval = cx18_setup_pci(cx, pci_dev, pci_id); + if (retval != 0) + goto free_workqueues; + + /* map io memory */ + CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); + cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET, + CX18_MEM_SIZE); + if (!cx->enc_mem) { + CX18_ERR("ioremap failed. Can't get a window into CX23418 " + "memory and register space\n"); + CX18_ERR("Each capture card with a CX23418 needs 64 MB of " + "vmalloc address space for the window\n"); + CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); + CX18_ERR("Use the vmalloc= kernel command line option to set " + "VmallocTotal to a larger value\n"); + retval = -ENOMEM; + goto free_mem; + } + cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET; + devtype = cx18_read_reg(cx, 0xC72028); + switch (devtype & 0xff000000) { + case 0xff000000: + CX18_INFO("cx23418 revision %08x (A)\n", devtype); + break; + case 0x01000000: + CX18_INFO("cx23418 revision %08x (B)\n", devtype); + break; + default: + CX18_INFO("cx23418 revision %08x (Unknown)\n", devtype); + break; + } + + cx18_init_power(cx, 1); + cx18_init_memory(cx); + + cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET); + cx18_init_scb(cx); + + cx18_gpio_init(cx); + + /* Initialize integrated A/V decoder early to set PLLs, just in case */ + retval = cx18_av_probe(cx); + if (retval) { + CX18_ERR("Could not register A/V decoder subdevice\n"); + goto free_map; + } + + /* Initialize GPIO Reset Controller to do chip resets during i2c init */ + if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) { + if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0) + CX18_WARN("Could not register GPIO reset controller" + "subdevice; proceeding anyway.\n"); + else + cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL; + } + + /* active i2c */ + CX18_DEBUG_INFO("activating i2c...\n"); + retval = init_cx18_i2c(cx); + if (retval) { + CX18_ERR("Could not initialize i2c\n"); + goto free_map; + } + + if (cx->card->hw_all & CX18_HW_TVEEPROM) { + /* Based on the model number the cardtype may be changed. + The PCI IDs are not always reliable. */ + const struct cx18_card *orig_card = cx->card; + cx18_process_eeprom(cx); + + if (cx->card != orig_card) { + /* Changed the cardtype; re-reset the I2C chips */ + cx18_gpio_init(cx); + cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL, + core, reset, (u32) CX18_GPIO_RESET_I2C); + } + } + if (cx->card->comment) + CX18_INFO("%s", cx->card->comment); + if (cx->card->v4l2_capabilities == 0) { + retval = -ENODEV; + goto free_i2c; + } + cx18_init_memory(cx); + cx18_init_scb(cx); + + /* Register IRQ */ + retval = request_irq(cx->pci_dev->irq, cx18_irq_handler, + IRQF_SHARED | IRQF_DISABLED, + cx->v4l2_dev.name, (void *)cx); + if (retval) { + CX18_ERR("Failed to register irq %d\n", retval); + goto free_i2c; + } + + if (cx->std == 0) + cx->std = V4L2_STD_NTSC_M; + + if (cx->options.tuner == -1) { + for (i = 0; i < CX18_CARD_MAX_TUNERS; i++) { + if ((cx->std & cx->card->tuners[i].std) == 0) + continue; + cx->options.tuner = cx->card->tuners[i].tuner; + break; + } + } + /* if no tuner was found, then pick the first tuner in the card list */ + if (cx->options.tuner == -1 && cx->card->tuners[0].std) { + cx->std = cx->card->tuners[0].std; + if (cx->std & V4L2_STD_PAL) + cx->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H; + else if (cx->std & V4L2_STD_NTSC) + cx->std = V4L2_STD_NTSC_M; + else if (cx->std & V4L2_STD_SECAM) + cx->std = V4L2_STD_SECAM_L; + cx->options.tuner = cx->card->tuners[0].tuner; + } + if (cx->options.radio == -1) + cx->options.radio = (cx->card->radio_input.audio_type != 0); + + /* The card is now fully identified, continue with card-specific + initialization. */ + cx18_init_struct2(cx); + + cx18_init_subdevs(cx); + + if (cx->std & V4L2_STD_525_60) + cx->is_60hz = 1; + else + cx->is_50hz = 1; + + cx2341x_handler_set_50hz(&cx->cxhdl, !cx->is_60hz); + + if (cx->options.radio > 0) + cx->v4l2_cap |= V4L2_CAP_RADIO; + + if (cx->options.tuner > -1) { + struct tuner_setup setup; + + setup.addr = ADDR_UNSET; + setup.type = cx->options.tuner; + setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */ + setup.config = NULL; + if (cx->options.radio > 0) + setup.mode_mask |= T_RADIO; + setup.tuner_callback = (setup.type == TUNER_XC2028) ? + cx18_reset_tuner_gpio : NULL; + cx18_call_all(cx, tuner, s_type_addr, &setup); + if (setup.type == TUNER_XC2028) { + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + }; + struct v4l2_priv_tun_config cfg = { + .tuner = cx->options.tuner, + .priv = &ctrl, + }; + cx18_call_all(cx, tuner, s_config, &cfg); + } + } + + /* The tuner is fixed to the standard. The other inputs (e.g. S-Video) + are not. */ + cx->tuner_std = cx->std; + if (cx->std == V4L2_STD_ALL) + cx->std = V4L2_STD_NTSC_M; + + retval = cx18_streams_setup(cx); + if (retval) { + CX18_ERR("Error %d setting up streams\n", retval); + goto free_irq; + } + retval = cx18_streams_register(cx); + if (retval) { + CX18_ERR("Error %d registering devices\n", retval); + goto free_streams; + } + + CX18_INFO("Initialized card: %s\n", cx->card_name); + + /* Load cx18 submodules (cx18-alsa) */ + request_modules(cx); + return 0; + +free_streams: + cx18_streams_cleanup(cx, 1); +free_irq: + free_irq(cx->pci_dev->irq, (void *)cx); +free_i2c: + exit_cx18_i2c(cx); +free_map: + cx18_iounmap(cx); +free_mem: + release_mem_region(cx->base_addr, CX18_MEM_SIZE); +free_workqueues: + destroy_workqueue(cx->in_work_queue); +err: + if (retval == 0) + retval = -ENODEV; + CX18_ERR("Error %d on initialization\n", retval); + + v4l2_device_unregister(&cx->v4l2_dev); + kfree(cx); + return retval; +} + +int cx18_init_on_first_open(struct cx18 *cx) +{ + int video_input; + int fw_retry_count = 3; + struct v4l2_frequency vf; + struct cx18_open_id fh; + v4l2_std_id std; + + fh.cx = cx; + + if (test_bit(CX18_F_I_FAILED, &cx->i_flags)) + return -ENXIO; + + if (test_and_set_bit(CX18_F_I_INITED, &cx->i_flags)) + return 0; + + while (--fw_retry_count > 0) { + /* load firmware */ + if (cx18_firmware_init(cx) == 0) + break; + if (fw_retry_count > 1) + CX18_WARN("Retry loading firmware\n"); + } + + if (fw_retry_count == 0) { + set_bit(CX18_F_I_FAILED, &cx->i_flags); + return -ENXIO; + } + set_bit(CX18_F_I_LOADED_FW, &cx->i_flags); + + /* + * Init the firmware twice to work around a silicon bug + * with the digital TS. + * + * The second firmware load requires us to normalize the APU state, + * or the audio for the first analog capture will be badly incorrect. + * + * I can't seem to call APU_RESETAI and have it succeed without the + * APU capturing audio, so we start and stop it here to do the reset + */ + + /* MPEG Encoding, 224 kbps, MPEG Layer II, 48 ksps */ + cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0); + cx18_vapi(cx, CX18_APU_RESETAI, 0); + cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG); + + fw_retry_count = 3; + while (--fw_retry_count > 0) { + /* load firmware */ + if (cx18_firmware_init(cx) == 0) + break; + if (fw_retry_count > 1) + CX18_WARN("Retry loading firmware\n"); + } + + if (fw_retry_count == 0) { + set_bit(CX18_F_I_FAILED, &cx->i_flags); + return -ENXIO; + } + + /* + * The second firmware load requires us to normalize the APU state, + * or the audio for the first analog capture will be badly incorrect. + * + * I can't seem to call APU_RESETAI and have it succeed without the + * APU capturing audio, so we start and stop it here to do the reset + */ + + /* MPEG Encoding, 224 kbps, MPEG Layer II, 48 ksps */ + cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0); + cx18_vapi(cx, CX18_APU_RESETAI, 0); + cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG); + + /* Init the A/V decoder, if it hasn't been already */ + v4l2_subdev_call(cx->sd_av, core, load_fw); + + vf.tuner = 0; + vf.type = V4L2_TUNER_ANALOG_TV; + vf.frequency = 6400; /* the tuner 'baseline' frequency */ + + /* Set initial frequency. For PAL/SECAM broadcasts no + 'default' channel exists AFAIK. */ + if (cx->std == V4L2_STD_NTSC_M_JP) + vf.frequency = 1460; /* ch. 1 91250*16/1000 */ + else if (cx->std & V4L2_STD_NTSC_M) + vf.frequency = 1076; /* ch. 4 67250*16/1000 */ + + video_input = cx->active_input; + cx->active_input++; /* Force update of input */ + cx18_s_input(NULL, &fh, video_input); + + /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code + in one place. */ + cx->std++; /* Force full standard initialization */ + std = (cx->tuner_std == V4L2_STD_ALL) ? V4L2_STD_NTSC_M : cx->tuner_std; + cx18_s_std(NULL, &fh, std); + cx18_s_frequency(NULL, &fh, &vf); + return 0; +} + +static void cx18_cancel_in_work_orders(struct cx18 *cx) +{ + int i; + for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++) + cancel_work_sync(&cx->in_work_order[i].work); +} + +static void cx18_cancel_out_work_orders(struct cx18 *cx) +{ + int i; + for (i = 0; i < CX18_MAX_STREAMS; i++) + if (&cx->streams[i].video_dev != NULL) + cancel_work_sync(&cx->streams[i].out_work_order); +} + +static void cx18_remove(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct cx18 *cx = to_cx18(v4l2_dev); + int i; + + CX18_DEBUG_INFO("Removing Card\n"); + + flush_request_modules(cx); + + /* Stop all captures */ + CX18_DEBUG_INFO("Stopping all streams\n"); + if (atomic_read(&cx->tot_capturing) > 0) + cx18_stop_all_captures(cx); + + /* Stop interrupts that cause incoming work to be queued */ + cx18_sw1_irq_disable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); + + /* Incoming work can cause outgoing work, so clean up incoming first */ + cx18_cancel_in_work_orders(cx); + cx18_cancel_out_work_orders(cx); + + /* Stop ack interrupts that may have been needed for work to finish */ + cx18_sw2_irq_disable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + + cx18_halt_firmware(cx); + + destroy_workqueue(cx->in_work_queue); + + cx18_streams_cleanup(cx, 1); + + exit_cx18_i2c(cx); + + free_irq(cx->pci_dev->irq, (void *)cx); + + cx18_iounmap(cx); + + release_mem_region(cx->base_addr, CX18_MEM_SIZE); + + pci_disable_device(cx->pci_dev); + + if (cx->vbi.sliced_mpeg_data[0] != NULL) + for (i = 0; i < CX18_VBI_FRAMES; i++) + kfree(cx->vbi.sliced_mpeg_data[i]); + + v4l2_ctrl_handler_free(&cx->av_state.hdl); + + CX18_INFO("Removed %s\n", cx->card_name); + + v4l2_device_unregister(v4l2_dev); + kfree(cx); +} + + +/* define a pci_driver for card detection */ +static struct pci_driver cx18_pci_driver = { + .name = "cx18", + .id_table = cx18_pci_tbl, + .probe = cx18_probe, + .remove = cx18_remove, +}; + +static int __init module_start(void) +{ + printk(KERN_INFO "cx18: Start initialization, version %s\n", + CX18_VERSION); + + /* Validate parameters */ + if (cx18_first_minor < 0 || cx18_first_minor >= CX18_MAX_CARDS) { + printk(KERN_ERR "cx18: Exiting, cx18_first_minor must be between 0 and %d\n", + CX18_MAX_CARDS - 1); + return -1; + } + + if (cx18_debug < 0 || cx18_debug > 511) { + cx18_debug = 0; + printk(KERN_INFO "cx18: Debug value must be >= 0 and <= 511!\n"); + } + + if (pci_register_driver(&cx18_pci_driver)) { + printk(KERN_ERR "cx18: Error detecting PCI card\n"); + return -ENODEV; + } + printk(KERN_INFO "cx18: End initialization\n"); + return 0; +} + +static void __exit module_cleanup(void) +{ + pci_unregister_driver(&cx18_pci_driver); +} + +module_init(module_start); +module_exit(module_cleanup); +MODULE_FIRMWARE(XC2028_DEFAULT_FIRMWARE); diff --git a/drivers/media/pci/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h new file mode 100644 index 00000000..2767c64d --- /dev/null +++ b/drivers/media/pci/cx18/cx18-driver.h @@ -0,0 +1,730 @@ +/* + * cx18 driver internal defines and structures + * + * Derived from ivtv-driver.h + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_DRIVER_H +#define CX18_DRIVER_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include "cx18-mailbox.h" +#include "cx18-av-core.h" +#include "cx23418.h" + +/* DVB */ +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" + +/* Videobuf / YUV support */ +#include +#include + +#ifndef CONFIG_PCI +# error "This driver requires kernel PCI support." +#endif + +#define CX18_MEM_OFFSET 0x00000000 +#define CX18_MEM_SIZE 0x04000000 +#define CX18_REG_OFFSET 0x02000000 + +/* Maximum cx18 driver instances. */ +#define CX18_MAX_CARDS 32 + +/* Supported cards */ +#define CX18_CARD_HVR_1600_ESMT 0 /* Hauppauge HVR 1600 (ESMT memory) */ +#define CX18_CARD_HVR_1600_SAMSUNG 1 /* Hauppauge HVR 1600 (Samsung memory) */ +#define CX18_CARD_COMPRO_H900 2 /* Compro VideoMate H900 */ +#define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */ +#define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */ +#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/ +#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */ +#define CX18_CARD_LEADTEK_DVR3100H 7 /* Leadtek WinFast DVR3100 H */ +#define CX18_CARD_GOTVIEW_PCI_DVD3 8 /* GoTView PCI DVD3 Hybrid */ +#define CX18_CARD_HVR_1600_S5H1411 9 /* Hauppauge HVR 1600 s5h1411/tda18271*/ +#define CX18_CARD_LAST 9 + +#define CX18_ENC_STREAM_TYPE_MPG 0 +#define CX18_ENC_STREAM_TYPE_TS 1 +#define CX18_ENC_STREAM_TYPE_YUV 2 +#define CX18_ENC_STREAM_TYPE_VBI 3 +#define CX18_ENC_STREAM_TYPE_PCM 4 +#define CX18_ENC_STREAM_TYPE_IDX 5 +#define CX18_ENC_STREAM_TYPE_RAD 6 +#define CX18_MAX_STREAMS 7 + +/* system vendor and device IDs */ +#define PCI_VENDOR_ID_CX 0x14f1 +#define PCI_DEVICE_ID_CX23418 0x5b7a + +/* subsystem vendor ID */ +#define CX18_PCI_ID_HAUPPAUGE 0x0070 +#define CX18_PCI_ID_COMPRO 0x185b +#define CX18_PCI_ID_YUAN 0x12ab +#define CX18_PCI_ID_CONEXANT 0x14f1 +#define CX18_PCI_ID_TOSHIBA 0x1179 +#define CX18_PCI_ID_LEADTEK 0x107D +#define CX18_PCI_ID_GOTVIEW 0x5854 + +/* ======================================================================== */ +/* ========================== START USER SETTABLE DMA VARIABLES =========== */ +/* ======================================================================== */ + +/* DMA Buffers, Default size in MB allocated */ +#define CX18_DEFAULT_ENC_TS_BUFFERS 1 +#define CX18_DEFAULT_ENC_MPG_BUFFERS 2 +#define CX18_DEFAULT_ENC_IDX_BUFFERS 1 +#define CX18_DEFAULT_ENC_YUV_BUFFERS 2 +#define CX18_DEFAULT_ENC_VBI_BUFFERS 1 +#define CX18_DEFAULT_ENC_PCM_BUFFERS 1 + +/* Maximum firmware DMA buffers per stream */ +#define CX18_MAX_FW_MDLS_PER_STREAM 63 + +/* YUV buffer sizes in bytes to ensure integer # of frames per buffer */ +#define CX18_UNIT_ENC_YUV_BUFSIZE (720 * 32 * 3 / 2) /* bytes */ +#define CX18_625_LINE_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 576/32) +#define CX18_525_LINE_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 480/32) + +/* IDX buffer size should be a multiple of the index entry size from the chip */ +struct cx18_enc_idx_entry { + __le32 length; + __le32 offset_low; + __le32 offset_high; + __le32 flags; + __le32 pts_low; + __le32 pts_high; +} __attribute__ ((packed)); +#define CX18_UNIT_ENC_IDX_BUFSIZE \ + (sizeof(struct cx18_enc_idx_entry) * V4L2_ENC_IDX_ENTRIES) + +/* DMA buffer, default size in kB allocated */ +#define CX18_DEFAULT_ENC_TS_BUFSIZE 32 +#define CX18_DEFAULT_ENC_MPG_BUFSIZE 32 +#define CX18_DEFAULT_ENC_IDX_BUFSIZE (CX18_UNIT_ENC_IDX_BUFSIZE * 1 / 1024 + 1) +#define CX18_DEFAULT_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 3 / 1024 + 1) +#define CX18_DEFAULT_ENC_PCM_BUFSIZE 4 + +/* i2c stuff */ +#define I2C_CLIENTS_MAX 16 + +/* debugging */ + +/* Flag to turn on high volume debugging */ +#define CX18_DBGFLG_WARN (1 << 0) +#define CX18_DBGFLG_INFO (1 << 1) +#define CX18_DBGFLG_API (1 << 2) +#define CX18_DBGFLG_DMA (1 << 3) +#define CX18_DBGFLG_IOCTL (1 << 4) +#define CX18_DBGFLG_FILE (1 << 5) +#define CX18_DBGFLG_I2C (1 << 6) +#define CX18_DBGFLG_IRQ (1 << 7) +/* Flag to turn on high volume debugging */ +#define CX18_DBGFLG_HIGHVOL (1 << 8) + +/* NOTE: extra space before comma in 'fmt , ## args' is required for + gcc-2.95, otherwise it won't compile. */ +#define CX18_DEBUG(x, type, fmt, args...) \ + do { \ + if ((x) & cx18_debug) \ + v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \ + } while (0) +#define CX18_DEBUG_WARN(fmt, args...) CX18_DEBUG(CX18_DBGFLG_WARN, "warning", fmt , ## args) +#define CX18_DEBUG_INFO(fmt, args...) CX18_DEBUG(CX18_DBGFLG_INFO, "info", fmt , ## args) +#define CX18_DEBUG_API(fmt, args...) CX18_DEBUG(CX18_DBGFLG_API, "api", fmt , ## args) +#define CX18_DEBUG_DMA(fmt, args...) CX18_DEBUG(CX18_DBGFLG_DMA, "dma", fmt , ## args) +#define CX18_DEBUG_IOCTL(fmt, args...) CX18_DEBUG(CX18_DBGFLG_IOCTL, "ioctl", fmt , ## args) +#define CX18_DEBUG_FILE(fmt, args...) CX18_DEBUG(CX18_DBGFLG_FILE, "file", fmt , ## args) +#define CX18_DEBUG_I2C(fmt, args...) CX18_DEBUG(CX18_DBGFLG_I2C, "i2c", fmt , ## args) +#define CX18_DEBUG_IRQ(fmt, args...) CX18_DEBUG(CX18_DBGFLG_IRQ, "irq", fmt , ## args) + +#define CX18_DEBUG_HIGH_VOL(x, type, fmt, args...) \ + do { \ + if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \ + v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \ + } while (0) +#define CX18_DEBUG_HI_WARN(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_WARN, "warning", fmt , ## args) +#define CX18_DEBUG_HI_INFO(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_INFO, "info", fmt , ## args) +#define CX18_DEBUG_HI_API(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_API, "api", fmt , ## args) +#define CX18_DEBUG_HI_DMA(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_DMA, "dma", fmt , ## args) +#define CX18_DEBUG_HI_IOCTL(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IOCTL, "ioctl", fmt , ## args) +#define CX18_DEBUG_HI_FILE(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_FILE, "file", fmt , ## args) +#define CX18_DEBUG_HI_I2C(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_I2C, "i2c", fmt , ## args) +#define CX18_DEBUG_HI_IRQ(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IRQ, "irq", fmt , ## args) + +/* Standard kernel messages */ +#define CX18_ERR(fmt, args...) v4l2_err(&cx->v4l2_dev, fmt , ## args) +#define CX18_WARN(fmt, args...) v4l2_warn(&cx->v4l2_dev, fmt , ## args) +#define CX18_INFO(fmt, args...) v4l2_info(&cx->v4l2_dev, fmt , ## args) + +/* Messages for internal subdevs to use */ +#define CX18_DEBUG_DEV(x, dev, type, fmt, args...) \ + do { \ + if ((x) & cx18_debug) \ + v4l2_info(dev, " " type ": " fmt , ## args); \ + } while (0) +#define CX18_DEBUG_WARN_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args) +#define CX18_DEBUG_INFO_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args) +#define CX18_DEBUG_API_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args) +#define CX18_DEBUG_DMA_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args) +#define CX18_DEBUG_IOCTL_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args) +#define CX18_DEBUG_FILE_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args) +#define CX18_DEBUG_I2C_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args) +#define CX18_DEBUG_IRQ_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args) + +#define CX18_DEBUG_HIGH_VOL_DEV(x, dev, type, fmt, args...) \ + do { \ + if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \ + v4l2_info(dev, " " type ": " fmt , ## args); \ + } while (0) +#define CX18_DEBUG_HI_WARN_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args) +#define CX18_DEBUG_HI_INFO_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args) +#define CX18_DEBUG_HI_API_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args) +#define CX18_DEBUG_HI_DMA_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args) +#define CX18_DEBUG_HI_IOCTL_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args) +#define CX18_DEBUG_HI_FILE_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args) +#define CX18_DEBUG_HI_I2C_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args) +#define CX18_DEBUG_HI_IRQ_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args) + +#define CX18_ERR_DEV(dev, fmt, args...) v4l2_err(dev, fmt , ## args) +#define CX18_WARN_DEV(dev, fmt, args...) v4l2_warn(dev, fmt , ## args) +#define CX18_INFO_DEV(dev, fmt, args...) v4l2_info(dev, fmt , ## args) + +extern int cx18_debug; + +struct cx18_options { + int megabytes[CX18_MAX_STREAMS]; /* Size in megabytes of each stream */ + int cardtype; /* force card type on load */ + int tuner; /* set tuner on load */ + int radio; /* enable/disable radio */ +}; + +/* per-mdl bit flags */ +#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianess swapped */ + +/* per-stream, s_flags */ +#define CX18_F_S_CLAIMED 3 /* this stream is claimed */ +#define CX18_F_S_STREAMING 4 /* the fw is decoding/encoding this stream */ +#define CX18_F_S_INTERNAL_USE 5 /* this stream is used internally (sliced VBI processing) */ +#define CX18_F_S_STREAMOFF 7 /* signal end of stream EOS */ +#define CX18_F_S_APPL_IO 8 /* this stream is used read/written by an application */ +#define CX18_F_S_STOPPING 9 /* telling the fw to stop capturing */ + +/* per-cx18, i_flags */ +#define CX18_F_I_LOADED_FW 0 /* Loaded firmware 1st time */ +#define CX18_F_I_EOS 4 /* End of encoder stream */ +#define CX18_F_I_RADIO_USER 5 /* radio tuner is selected */ +#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */ +#define CX18_F_I_INITED 21 /* set after first open */ +#define CX18_F_I_FAILED 22 /* set if first open failed */ + +/* These are the VBI types as they appear in the embedded VBI private packets. */ +#define CX18_SLICED_TYPE_TELETEXT_B (1) +#define CX18_SLICED_TYPE_CAPTION_525 (4) +#define CX18_SLICED_TYPE_WSS_625 (5) +#define CX18_SLICED_TYPE_VPS (7) + +/** + * list_entry_is_past_end - check if a previous loop cursor is off list end + * @pos: the type * previously used as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Check if the entry's list_head is the head of the list, thus it's not a + * real entry but was the loop cursor that walked past the end + */ +#define list_entry_is_past_end(pos, head, member) \ + (&pos->member == (head)) + +struct cx18_buffer { + struct list_head list; + dma_addr_t dma_handle; + char *buf; + + u32 bytesused; + u32 readpos; +}; + +struct cx18_mdl { + struct list_head list; + u32 id; /* index into cx->scb->cpu_mdl[] of 1st cx18_mdl_ent */ + + unsigned int skipped; + unsigned long m_flags; + + struct list_head buf_list; + struct cx18_buffer *curr_buf; /* current buffer in list for reading */ + + u32 bytesused; + u32 readpos; +}; + +struct cx18_queue { + struct list_head list; + atomic_t depth; + u32 bytesused; + spinlock_t lock; +}; + +struct cx18_stream; /* forward reference */ + +struct cx18_dvb { + struct cx18_stream *stream; + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + struct dmxdev dmxdev; + struct dvb_adapter dvb_adapter; + struct dvb_demux demux; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + int enabled; + int feeding; + struct mutex feedlock; +}; + +struct cx18; /* forward reference */ +struct cx18_scb; /* forward reference */ + + +#define CX18_MAX_MDL_ACKS 2 +#define CX18_MAX_IN_WORK_ORDERS (CX18_MAX_FW_MDLS_PER_STREAM + 7) +/* CPU_DE_RELEASE_MDL can burst CX18_MAX_FW_MDLS_PER_STREAM orders in a group */ + +#define CX18_F_EWO_MB_STALE_UPON_RECEIPT 0x1 +#define CX18_F_EWO_MB_STALE_WHILE_PROC 0x2 +#define CX18_F_EWO_MB_STALE \ + (CX18_F_EWO_MB_STALE_UPON_RECEIPT | CX18_F_EWO_MB_STALE_WHILE_PROC) + +struct cx18_in_work_order { + struct work_struct work; + atomic_t pending; + struct cx18 *cx; + unsigned long flags; + int rpu; + struct cx18_mailbox mb; + struct cx18_mdl_ack mdl_ack[CX18_MAX_MDL_ACKS]; + char *str; +}; + +#define CX18_INVALID_TASK_HANDLE 0xffffffff + +struct cx18_stream { + /* These first five fields are always set, even if the stream + is not actually created. */ + struct video_device *video_dev; /* NULL when stream not created */ + struct cx18_dvb *dvb; /* DVB / Digital Transport */ + struct cx18 *cx; /* for ease of use */ + const char *name; /* name of the stream */ + int type; /* stream type */ + u32 handle; /* task handle */ + unsigned int mdl_base_idx; + + u32 id; + unsigned long s_flags; /* status flags, see above */ + int dma; /* can be PCI_DMA_TODEVICE, + PCI_DMA_FROMDEVICE or + PCI_DMA_NONE */ + wait_queue_head_t waitq; + + /* Buffers */ + struct list_head buf_pool; /* buffers not attached to an MDL */ + u32 buffers; /* total buffers owned by this stream */ + u32 buf_size; /* size in bytes of a single buffer */ + + /* MDL sizes - all stream MDLs are the same size */ + u32 bufs_per_mdl; + u32 mdl_size; /* total bytes in all buffers in a mdl */ + + /* MDL Queues */ + struct cx18_queue q_free; /* free - in rotation, not committed */ + struct cx18_queue q_busy; /* busy - in use by firmware */ + struct cx18_queue q_full; /* full - data for user apps */ + struct cx18_queue q_idle; /* idle - not in rotation */ + + struct work_struct out_work_order; + + /* Videobuf for YUV video */ + u32 pixelformat; + u32 vb_bytes_per_frame; + struct list_head vb_capture; /* video capture queue */ + spinlock_t vb_lock; + struct timer_list vb_timeout; + + struct videobuf_queue vbuf_q; + spinlock_t vbuf_q_lock; /* Protect vbuf_q */ + enum v4l2_buf_type vb_type; +}; + +struct cx18_videobuf_buffer { + /* Common video buffer sub-system struct */ + struct videobuf_buffer vb; + v4l2_std_id tvnorm; /* selected tv norm */ + u32 bytes_used; +}; + +struct cx18_open_id { + struct v4l2_fh fh; + u32 open_id; + int type; + struct cx18 *cx; +}; + +static inline struct cx18_open_id *fh2id(struct v4l2_fh *fh) +{ + return container_of(fh, struct cx18_open_id, fh); +} + +static inline struct cx18_open_id *file2id(struct file *file) +{ + return fh2id(file->private_data); +} + +/* forward declaration of struct defined in cx18-cards.h */ +struct cx18_card; + +/* + * A note about "sliced" VBI data as implemented in this driver: + * + * Currently we collect the sliced VBI in the form of Ancillary Data + * packets, inserted by the AV core decoder/digitizer/slicer in the + * horizontal blanking region of the VBI lines, in "raw" mode as far as + * the Encoder is concerned. We don't ever tell the Encoder itself + * to provide sliced VBI. (AV Core: sliced mode - Encoder: raw mode) + * + * We then process the ancillary data ourselves to send the sliced data + * to the user application directly or build up MPEG-2 private stream 1 + * packets to splice into (only!) MPEG-2 PS streams for the user app. + * + * (That's how ivtv essentially does it.) + * + * The Encoder should be able to extract certain sliced VBI data for + * us and provide it in a separate stream or splice it into any type of + * MPEG PS or TS stream, but this isn't implemented yet. + */ + +/* + * Number of "raw" VBI samples per horizontal line we tell the Encoder to + * grab from the decoder/digitizer/slicer output for raw or sliced VBI. + * It depends on the pixel clock and the horiz rate: + * + * (1/Fh)*(2*Fp) = Samples/line + * = 4 bytes EAV + Anc data in hblank + 4 bytes SAV + active samples + * + * Sliced VBI data is sent as ancillary data during horizontal blanking + * Raw VBI is sent as active video samples during vertcal blanking + * + * We use a BT.656 pxiel clock of 13.5 MHz and a BT.656 active line + * length of 720 pixels @ 4:2:2 sampling. Thus... + * + * For systems that use a 15.734 kHz horizontal rate, such as + * NTSC-M, PAL-M, PAL-60, and other 60 Hz/525 line systems, we have: + * + * (1/15.734 kHz) * 2 * 13.5 MHz = 1716 samples/line = + * 4 bytes SAV + 268 bytes anc data + 4 bytes SAV + 1440 active samples + * + * For systems that use a 15.625 kHz horizontal rate, such as + * PAL-B/G/H, PAL-I, SECAM-L and other 50 Hz/625 line systems, we have: + * + * (1/15.625 kHz) * 2 * 13.5 MHz = 1728 samples/line = + * 4 bytes SAV + 280 bytes anc data + 4 bytes SAV + 1440 active samples + */ +static const u32 vbi_active_samples = 1444; /* 4 byte SAV + 720 Y + 720 U/V */ +static const u32 vbi_hblank_samples_60Hz = 272; /* 4 byte EAV + 268 anc/fill */ +static const u32 vbi_hblank_samples_50Hz = 284; /* 4 byte EAV + 280 anc/fill */ + +#define CX18_VBI_FRAMES 32 + +struct vbi_info { + /* Current state of v4l2 VBI settings for this device */ + struct v4l2_format in; + struct v4l2_sliced_vbi_format *sliced_in; /* pointer to in.fmt.sliced */ + u32 count; /* Count of VBI data lines: 60 Hz: 12 or 50 Hz: 18 */ + u32 start[2]; /* First VBI data line per field: 10 & 273 or 6 & 318 */ + + u32 frame; /* Count of VBI buffers/frames received from Encoder */ + + /* + * Vars for creation and insertion of MPEG Private Stream 1 packets + * of sliced VBI data into an MPEG PS + */ + + /* Boolean: create and insert Private Stream 1 packets into the PS */ + int insert_mpeg; + + /* + * Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines. + * Used in cx18-vbi.c only for collecting sliced data, and as a source + * during conversion of sliced VBI data into MPEG Priv Stream 1 packets. + * We don't need to save state here, but the array may have been a bit + * too big (2304 bytes) to alloc from the stack. + */ + struct v4l2_sliced_vbi_data sliced_data[36]; + + /* + * A ring buffer of driver-generated MPEG-2 PS + * Program Pack/Private Stream 1 packets for sliced VBI data insertion + * into the MPEG PS stream. + * + * In each sliced_mpeg_data[] buffer is: + * 16 byte MPEG-2 PS Program Pack Header + * 16 byte MPEG-2 Private Stream 1 PES Header + * 4 byte magic number: "itv0" or "ITV0" + * 4 byte first field line mask, if "itv0" + * 4 byte second field line mask, if "itv0" + * 36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data + * + * Each line in the payload is + * 1 byte line header derived from the SDID (WSS, CC, VPS, etc.) + * 42 bytes of line data + * + * That's a maximum 1552 bytes of payload in the Private Stream 1 packet + * which is the payload size a PVR-350 (CX23415) MPEG decoder will + * accept for VBI data. So, including the headers, it's a maximum 1584 + * bytes total. + */ +#define CX18_SLICED_MPEG_DATA_MAXSZ 1584 + /* copy_vbi_buf() needs 8 temp bytes on the end for the worst case */ +#define CX18_SLICED_MPEG_DATA_BUFSZ (CX18_SLICED_MPEG_DATA_MAXSZ+8) + u8 *sliced_mpeg_data[CX18_VBI_FRAMES]; + u32 sliced_mpeg_size[CX18_VBI_FRAMES]; + + /* Count of Program Pack/Program Stream 1 packets inserted into PS */ + u32 inserted_frame; + + /* + * A dummy driver stream transfer mdl & buffer with a copy of the next + * sliced_mpeg_data[] buffer for output to userland apps. + * Only used in cx18-fileops.c, but its state needs to persist at times. + */ + struct cx18_mdl sliced_mpeg_mdl; + struct cx18_buffer sliced_mpeg_buf; +}; + +/* Per cx23418, per I2C bus private algo callback data */ +struct cx18_i2c_algo_callback_data { + struct cx18 *cx; + int bus_index; /* 0 or 1 for the cx23418's 1st or 2nd I2C bus */ +}; + +#define CX18_MAX_MMIO_WR_RETRIES 10 + +/* Struct to hold info about cx18 cards */ +struct cx18 { + int instance; + struct pci_dev *pci_dev; + struct v4l2_device v4l2_dev; + struct v4l2_subdev *sd_av; /* A/V decoder/digitizer sub-device */ + struct v4l2_subdev *sd_extmux; /* External multiplexer sub-dev */ + + const struct cx18_card *card; /* card information */ + const char *card_name; /* full name of the card */ + const struct cx18_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */ + u8 is_50hz; + u8 is_60hz; + u8 nof_inputs; /* number of video inputs */ + u8 nof_audio_inputs; /* number of audio inputs */ + u32 v4l2_cap; /* V4L2 capabilities of card */ + u32 hw_flags; /* Hardware description of the board */ + unsigned int free_mdl_idx; + struct cx18_scb __iomem *scb; /* pointer to SCB */ + struct mutex epu2apu_mb_lock; /* protect driver to chip mailbox in SCB*/ + struct mutex epu2cpu_mb_lock; /* protect driver to chip mailbox in SCB*/ + + struct cx18_av_state av_state; + + /* codec settings */ + struct cx2341x_handler cxhdl; + u32 filter_mode; + u32 temporal_strength; + u32 spatial_strength; + + /* dualwatch */ + unsigned long dualwatch_jiffies; + u32 dualwatch_stereo_mode; + + struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */ + struct cx18_options options; /* User options */ + int stream_buffers[CX18_MAX_STREAMS]; /* # of buffers for each stream */ + int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */ + struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */ + struct snd_cx18_card *alsa; /* ALSA interface for PCM capture stream */ + void (*pcm_announce_callback)(struct snd_cx18_card *card, u8 *pcm_data, + size_t num_bytes); + + unsigned long i_flags; /* global cx18 flags */ + atomic_t ana_capturing; /* count number of active analog capture streams */ + atomic_t tot_capturing; /* total count number of active capture streams */ + int search_pack_header; + + int open_id; /* incremented each time an open occurs, used as + unique ID. Starts at 1, so 0 can be used as + uninitialized value in the stream->id. */ + + resource_size_t base_addr; + + u8 card_rev; + void __iomem *enc_mem, *reg_mem; + + struct vbi_info vbi; + + u64 mpg_data_received; + u64 vbi_data_inserted; + + wait_queue_head_t mb_apu_waitq; + wait_queue_head_t mb_cpu_waitq; + wait_queue_head_t cap_w; + /* when the current DMA is finished this queue is woken up */ + wait_queue_head_t dma_waitq; + + u32 sw1_irq_mask; + u32 sw2_irq_mask; + u32 hw2_irq_mask; + + struct workqueue_struct *in_work_queue; + char in_workq_name[11]; /* "cx18-NN-in" */ + struct cx18_in_work_order in_work_order[CX18_MAX_IN_WORK_ORDERS]; + char epu_debug_str[256]; /* CX18_EPU_DEBUG is rare: use shared space */ + + /* i2c */ + struct i2c_adapter i2c_adap[2]; + struct i2c_algo_bit_data i2c_algo[2]; + struct cx18_i2c_algo_callback_data i2c_algo_cb_data[2]; + + struct IR_i2c_init_data ir_i2c_init_data; + + /* gpio */ + u32 gpio_dir; + u32 gpio_val; + struct mutex gpio_lock; + struct v4l2_subdev sd_gpiomux; + struct v4l2_subdev sd_resetctrl; + + /* v4l2 and User settings */ + + /* codec settings */ + u32 audio_input; + u32 active_input; + v4l2_std_id std; + v4l2_std_id tuner_std; /* The norm of the tuner (fixed) */ + + /* Used for cx18-alsa module loading */ + struct work_struct request_module_wk; +}; + +static inline struct cx18 *to_cx18(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct cx18, v4l2_dev); +} + +/* cx18 extensions to be loaded */ +extern int (*cx18_ext_init)(struct cx18 *); + +/* Globals */ +extern int cx18_first_minor; + +/*==============Prototypes==================*/ + +/* Return non-zero if a signal is pending */ +int cx18_msleep_timeout(unsigned int msecs, int intr); + +/* Read Hauppauge eeprom */ +struct tveeprom; /* forward reference */ +void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv); + +/* First-open initialization: load firmware, etc. */ +int cx18_init_on_first_open(struct cx18 *cx); + +/* Test if the current VBI mode is raw (1) or sliced (0) */ +static inline int cx18_raw_vbi(const struct cx18 *cx) +{ + return cx->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE; +} + +/* Call the specified callback for all subdevs with a grp_id bit matching the + * mask in hw (if 0, then match them all). Ignore any errors. */ +#define cx18_call_hw(cx, hw, o, f, args...) \ + do { \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_p(&(cx)->v4l2_dev, __sd, \ + !(hw) || (__sd->grp_id & (hw)), o, f , ##args); \ + } while (0) + +#define cx18_call_all(cx, o, f, args...) cx18_call_hw(cx, 0, o, f , ##args) + +/* Call the specified callback for all subdevs with a grp_id bit matching the + * mask in hw (if 0, then match them all). If the callback returns an error + * other than 0 or -ENOIOCTLCMD, then return with that error code. */ +#define cx18_call_hw_err(cx, hw, o, f, args...) \ +({ \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_until_err_p(&(cx)->v4l2_dev, \ + __sd, !(hw) || (__sd->grp_id & (hw)), o, f, \ + ##args); \ +}) + +#define cx18_call_all_err(cx, o, f, args...) \ + cx18_call_hw_err(cx, 0, o, f , ##args) + +#endif /* CX18_DRIVER_H */ diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c new file mode 100644 index 00000000..3eac59c5 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-dvb.c @@ -0,0 +1,609 @@ +/* + * cx18 functions for DVB support + * + * Copyright (c) 2008 Steven Toth + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx18-version.h" +#include "cx18-dvb.h" +#include "cx18-io.h" +#include "cx18-queue.h" +#include "cx18-streams.h" +#include "cx18-cards.h" +#include "cx18-gpio.h" +#include "s5h1409.h" +#include "mxl5005s.h" +#include "s5h1411.h" +#include "tda18271.h" +#include "zl10353.h" + +#include +#include "mt352.h" +#include "mt352_priv.h" +#include "tuner-xc2028.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define FWFILE "dvb-cx18-mpc718-mt352.fw" + +#define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000 +#define CX18_CLOCK_ENABLE2 0xc71024 +#define CX18_DMUX_CLK_MASK 0x0080 + +/* + * CX18_CARD_HVR_1600_ESMT + * CX18_CARD_HVR_1600_SAMSUNG + */ + +static struct mxl5005s_config hauppauge_hvr1600_tuner = { + .i2c_address = 0xC6 >> 1, + .if_freq = IF_FREQ_5380000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C_H, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .qam_gain = 0x02, + .AgcMasterByte = 0x00, +}; + +static struct s5h1409_config hauppauge_hvr1600_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, + .hvr1600_opt = S5H1409_HVR1600_OPTIMIZE +}; + +/* + * CX18_CARD_HVR_1600_S5H1411 + */ +static struct s5h1411_config hcw_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_config hauppauge_tda18271_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_DIGITAL, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +/* + * CX18_CARD_LEADTEK_DVR3100H + */ +/* Information/confirmation of proper config values provided by Terry Wu */ +static struct zl10353_config leadtek_dvr3100h_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ +}; + +/* + * CX18_CARD_YUAN_MPC718 + */ +/* + * Due to + * + * 1. an absence of information on how to prgram the MT352 + * 2. the Linux mt352 module pushing MT352 initialzation off onto us here + * + * We have to use an init sequence that *you* must extract from the Windows + * driver (yuanrap.sys) and which we load as a firmware. + * + * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual + * with chip programming details, then I can remove this annoyance. + */ +static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, + const struct firmware **fw) +{ + struct cx18 *cx = stream->cx; + const char *fn = FWFILE; + int ret; + + ret = request_firmware(fw, fn, &cx->pci_dev->dev); + if (ret) + CX18_ERR("Unable to open firmware file %s\n", fn); + else { + size_t sz = (*fw)->size; + if (sz < 2 || sz > 64 || (sz % 2) != 0) { + CX18_ERR("Firmware %s has a bad size: %lu bytes\n", + fn, (unsigned long) sz); + ret = -EILSEQ; + release_firmware(*fw); + *fw = NULL; + } + } + + if (ret) { + CX18_ERR("The MPC718 board variant with the MT352 DVB-T" + "demodualtor will not work without it\n"); + CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware " + "mpc718' if you need the firmware\n"); + } + return ret; +} + +static int yuan_mpc718_mt352_init(struct dvb_frontend *fe) +{ + struct cx18_dvb *dvb = container_of(fe->dvb, + struct cx18_dvb, dvb_adapter); + struct cx18_stream *stream = dvb->stream; + const struct firmware *fw = NULL; + int ret; + int i; + u8 buf[3]; + + ret = yuan_mpc718_mt352_reqfw(stream, &fw); + if (ret) + return ret; + + /* Loop through all the register-value pairs in the firmware file */ + for (i = 0; i < fw->size; i += 2) { + buf[0] = fw->data[i]; + /* Intercept a few registers we want to set ourselves */ + switch (buf[0]) { + case TRL_NOMINAL_RATE_0: + /* Set our custom OFDM bandwidth in the case below */ + break; + case TRL_NOMINAL_RATE_1: + /* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */ + /* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */ + /* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */ + buf[1] = 0x72; + buf[2] = 0x49; + mt352_write(fe, buf, 3); + break; + case INPUT_FREQ_0: + /* Set our custom IF in the case below */ + break; + case INPUT_FREQ_1: + /* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */ + buf[1] = 0x31; + buf[2] = 0xc0; + mt352_write(fe, buf, 3); + break; + default: + /* Pass through the register-value pair from the fw */ + buf[1] = fw->data[i+1]; + mt352_write(fe, buf, 2); + break; + } + } + + buf[0] = (u8) TUNER_GO; + buf[1] = 0x01; /* Go */ + mt352_write(fe, buf, 2); + release_firmware(fw); + return 0; +} + +static struct mt352_config yuan_mpc718_mt352_demod = { + .demod_address = 0x1e >> 1, + .adc_clock = 20480, /* 20.480 MHz */ + .if2 = 4560, /* 4.560 MHz */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .demod_init = yuan_mpc718_mt352_init, +}; + +static struct zl10353_config yuan_mpc718_zl10353_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ +}; + +static struct zl10353_config gotview_dvd3_zl10353_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ +}; + +static int dvb_register(struct cx18_stream *stream); + +/* Kernel DVB framework calls this when the feed needs to start. + * The CX18 framework should enable the transport DMA handling + * and queue processing. + */ +static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct cx18_stream *stream = (struct cx18_stream *) demux->priv; + struct cx18 *cx; + int ret; + u32 v; + + if (!stream) + return -EINVAL; + + cx = stream->cx; + CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n", + feed->pid, feed->index); + + mutex_lock(&cx->serialize_lock); + ret = cx18_init_on_first_open(cx); + mutex_unlock(&cx->serialize_lock); + if (ret) { + CX18_ERR("Failed to initialize firmware starting DVB feed\n"); + return ret; + } + ret = -EINVAL; + + switch (cx->card->type) { + case CX18_CARD_HVR_1600_ESMT: + case CX18_CARD_HVR_1600_SAMSUNG: + case CX18_CARD_HVR_1600_S5H1411: + v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL); + v |= 0x00400000; /* Serial Mode */ + v |= 0x00002000; /* Data Length - Byte */ + v |= 0x00010000; /* Error - Polarity */ + v |= 0x00020000; /* Error - Passthru */ + v |= 0x000c0000; /* Error - Ignore */ + cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL); + break; + + case CX18_CARD_LEADTEK_DVR3100H: + case CX18_CARD_YUAN_MPC718: + case CX18_CARD_GOTVIEW_PCI_DVD3: + default: + /* Assumption - Parallel transport - Signalling + * undefined or default. + */ + break; + } + + if (!demux->dmx.frontend) + return -EINVAL; + + mutex_lock(&stream->dvb->feedlock); + if (stream->dvb->feeding++ == 0) { + CX18_DEBUG_INFO("Starting Transport DMA\n"); + mutex_lock(&cx->serialize_lock); + set_bit(CX18_F_S_STREAMING, &stream->s_flags); + ret = cx18_start_v4l2_encode_stream(stream); + if (ret < 0) { + CX18_DEBUG_INFO("Failed to start Transport DMA\n"); + stream->dvb->feeding--; + if (stream->dvb->feeding == 0) + clear_bit(CX18_F_S_STREAMING, &stream->s_flags); + } + mutex_unlock(&cx->serialize_lock); + } else + ret = 0; + mutex_unlock(&stream->dvb->feedlock); + + return ret; +} + +/* Kernel DVB framework calls this when the feed needs to stop. */ +static int cx18_dvb_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct cx18_stream *stream = (struct cx18_stream *)demux->priv; + struct cx18 *cx; + int ret = -EINVAL; + + if (stream) { + cx = stream->cx; + CX18_DEBUG_INFO("Stop feed: pid = 0x%x index = %d\n", + feed->pid, feed->index); + + mutex_lock(&stream->dvb->feedlock); + if (--stream->dvb->feeding == 0) { + CX18_DEBUG_INFO("Stopping Transport DMA\n"); + mutex_lock(&cx->serialize_lock); + ret = cx18_stop_v4l2_encode_stream(stream, 0); + mutex_unlock(&cx->serialize_lock); + } else + ret = 0; + mutex_unlock(&stream->dvb->feedlock); + } + + return ret; +} + +int cx18_dvb_register(struct cx18_stream *stream) +{ + struct cx18 *cx = stream->cx; + struct cx18_dvb *dvb = stream->dvb; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + int ret; + + if (!dvb) + return -EINVAL; + + dvb->enabled = 0; + dvb->stream = stream; + + ret = dvb_register_adapter(&dvb->dvb_adapter, + CX18_DRIVER_NAME, + THIS_MODULE, &cx->pci_dev->dev, adapter_nr); + if (ret < 0) + goto err_out; + + dvb_adapter = &dvb->dvb_adapter; + + dvbdemux = &dvb->demux; + + dvbdemux->priv = (void *)stream; + + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = cx18_dvb_start_feed; + dvbdemux->stop_feed = cx18_dvb_stop_feed; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + ret = dvb_dmx_init(dvbdemux); + if (ret < 0) + goto err_dvb_unregister_adapter; + + dmx = &dvbdemux->dmx; + + dvb->hw_frontend.source = DMX_FRONTEND_0; + dvb->mem_frontend.source = DMX_MEMORY_FE; + dvb->dmxdev.filternum = 256; + dvb->dmxdev.demux = dmx; + + ret = dvb_dmxdev_init(&dvb->dmxdev, dvb_adapter); + if (ret < 0) + goto err_dvb_dmx_release; + + ret = dmx->add_frontend(dmx, &dvb->hw_frontend); + if (ret < 0) + goto err_dvb_dmxdev_release; + + ret = dmx->add_frontend(dmx, &dvb->mem_frontend); + if (ret < 0) + goto err_remove_hw_frontend; + + ret = dmx->connect_frontend(dmx, &dvb->hw_frontend); + if (ret < 0) + goto err_remove_mem_frontend; + + ret = dvb_register(stream); + if (ret < 0) + goto err_disconnect_frontend; + + dvb_net_init(dvb_adapter, &dvb->dvbnet, dmx); + + CX18_INFO("DVB Frontend registered\n"); + CX18_INFO("Registered DVB adapter%d for %s (%d x %d.%02d kB)\n", + stream->dvb->dvb_adapter.num, stream->name, + stream->buffers, stream->buf_size/1024, + (stream->buf_size * 100 / 1024) % 100); + + mutex_init(&dvb->feedlock); + dvb->enabled = 1; + return ret; + +err_disconnect_frontend: + dmx->disconnect_frontend(dmx); +err_remove_mem_frontend: + dmx->remove_frontend(dmx, &dvb->mem_frontend); +err_remove_hw_frontend: + dmx->remove_frontend(dmx, &dvb->hw_frontend); +err_dvb_dmxdev_release: + dvb_dmxdev_release(&dvb->dmxdev); +err_dvb_dmx_release: + dvb_dmx_release(dvbdemux); +err_dvb_unregister_adapter: + dvb_unregister_adapter(dvb_adapter); +err_out: + return ret; +} + +void cx18_dvb_unregister(struct cx18_stream *stream) +{ + struct cx18 *cx = stream->cx; + struct cx18_dvb *dvb = stream->dvb; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + + CX18_INFO("unregister DVB\n"); + + if (dvb == NULL || !dvb->enabled) + return; + + dvb_adapter = &dvb->dvb_adapter; + dvbdemux = &dvb->demux; + dmx = &dvbdemux->dmx; + + dmx->close(dmx); + dvb_net_release(&dvb->dvbnet); + dmx->remove_frontend(dmx, &dvb->mem_frontend); + dmx->remove_frontend(dmx, &dvb->hw_frontend); + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(dvbdemux); + dvb_unregister_frontend(dvb->fe); + dvb_frontend_detach(dvb->fe); + dvb_unregister_adapter(dvb_adapter); +} + +/* All the DVB attach calls go here, this function get's modified + * for each new card. cx18_dvb_start_feed() will also need changes. + */ +static int dvb_register(struct cx18_stream *stream) +{ + struct cx18_dvb *dvb = stream->dvb; + struct cx18 *cx = stream->cx; + int ret = 0; + + switch (cx->card->type) { + case CX18_CARD_HVR_1600_ESMT: + case CX18_CARD_HVR_1600_SAMSUNG: + dvb->fe = dvb_attach(s5h1409_attach, + &hauppauge_hvr1600_config, + &cx->i2c_adap[0]); + if (dvb->fe != NULL) { + dvb_attach(mxl5005s_attach, dvb->fe, + &cx->i2c_adap[0], + &hauppauge_hvr1600_tuner); + ret = 0; + } + break; + case CX18_CARD_HVR_1600_S5H1411: + dvb->fe = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &cx->i2c_adap[0]); + if (dvb->fe != NULL) + dvb_attach(tda18271_attach, dvb->fe, + 0x60, &cx->i2c_adap[0], + &hauppauge_tda18271_config); + break; + case CX18_CARD_LEADTEK_DVR3100H: + dvb->fe = dvb_attach(zl10353_attach, + &leadtek_dvr3100h_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; + case CX18_CARD_YUAN_MPC718: + /* + * TODO + * Apparently, these cards also could instead have a + * DiBcom demod supported by one of the db7000 drivers + */ + dvb->fe = dvb_attach(mt352_attach, + &yuan_mpc718_mt352_demod, + &cx->i2c_adap[1]); + if (dvb->fe == NULL) + dvb->fe = dvb_attach(zl10353_attach, + &yuan_mpc718_zl10353_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; + case CX18_CARD_GOTVIEW_PCI_DVD3: + dvb->fe = dvb_attach(zl10353_attach, + &gotview_dvd3_zl10353_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; + default: + /* No Digital Tv Support */ + break; + } + + if (dvb->fe == NULL) { + CX18_ERR("frontend initialization failed\n"); + return -1; + } + + dvb->fe->callback = cx18_reset_tuner_gpio; + + ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe); + if (ret < 0) { + if (dvb->fe->ops.release) + dvb->fe->ops.release(dvb->fe); + return ret; + } + + /* + * The firmware seems to enable the TS DMUX clock + * under various circumstances. However, since we know we + * might use it, let's just turn it on ourselves here. + */ + cx18_write_reg_expect(cx, + (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK, + CX18_CLOCK_ENABLE2, + CX18_DMUX_CLK_MASK, + (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK); + + return ret; +} + +MODULE_FIRMWARE(FWFILE); diff --git a/drivers/media/pci/cx18/cx18-dvb.h b/drivers/media/pci/cx18/cx18-dvb.h new file mode 100644 index 00000000..bf8d8f6f --- /dev/null +++ b/drivers/media/pci/cx18/cx18-dvb.h @@ -0,0 +1,25 @@ +/* + * cx18 functions for DVB support + * + * Copyright (c) 2008 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx18-driver.h" + +int cx18_dvb_register(struct cx18_stream *stream); +void cx18_dvb_unregister(struct cx18_stream *stream); diff --git a/drivers/media/pci/cx18/cx18-fileops.c b/drivers/media/pci/cx18/cx18-fileops.c new file mode 100644 index 00000000..4bfd865a --- /dev/null +++ b/drivers/media/pci/cx18/cx18-fileops.c @@ -0,0 +1,881 @@ +/* + * cx18 file operation functions + * + * Derived from ivtv-fileops.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-fileops.h" +#include "cx18-i2c.h" +#include "cx18-queue.h" +#include "cx18-vbi.h" +#include "cx18-audio.h" +#include "cx18-mailbox.h" +#include "cx18-scb.h" +#include "cx18-streams.h" +#include "cx18-controls.h" +#include "cx18-ioctl.h" +#include "cx18-cards.h" + +/* This function tries to claim the stream for a specific file descriptor. + If no one else is using this stream then the stream is claimed and + associated VBI and IDX streams are also automatically claimed. + Possible error returns: -EBUSY if someone else has claimed + the stream or 0 on success. */ +int cx18_claim_stream(struct cx18_open_id *id, int type) +{ + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[type]; + struct cx18_stream *s_assoc; + + /* Nothing should ever try to directly claim the IDX stream */ + if (type == CX18_ENC_STREAM_TYPE_IDX) { + CX18_WARN("MPEG Index stream cannot be claimed " + "directly, but something tried.\n"); + return -EINVAL; + } + + if (test_and_set_bit(CX18_F_S_CLAIMED, &s->s_flags)) { + /* someone already claimed this stream */ + if (s->id == id->open_id) { + /* yes, this file descriptor did. So that's OK. */ + return 0; + } + if (s->id == -1 && type == CX18_ENC_STREAM_TYPE_VBI) { + /* VBI is handled already internally, now also assign + the file descriptor to this stream for external + reading of the stream. */ + s->id = id->open_id; + CX18_DEBUG_INFO("Start Read VBI\n"); + return 0; + } + /* someone else is using this stream already */ + CX18_DEBUG_INFO("Stream %d is busy\n", type); + return -EBUSY; + } + s->id = id->open_id; + + /* + * CX18_ENC_STREAM_TYPE_MPG needs to claim: + * CX18_ENC_STREAM_TYPE_VBI, if VBI insertion is on for sliced VBI, or + * CX18_ENC_STREAM_TYPE_IDX, if VBI insertion is off for sliced VBI + * (We don't yet fix up MPEG Index entries for our inserted packets). + * + * For all other streams we're done. + */ + if (type != CX18_ENC_STREAM_TYPE_MPG) + return 0; + + s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; + if (cx->vbi.insert_mpeg && !cx18_raw_vbi(cx)) + s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + else if (!cx18_stream_enabled(s_assoc)) + return 0; + + set_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags); + + /* mark that it is used internally */ + set_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags); + return 0; +} +EXPORT_SYMBOL(cx18_claim_stream); + +/* This function releases a previously claimed stream. It will take into + account associated VBI streams. */ +void cx18_release_stream(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + struct cx18_stream *s_assoc; + + s->id = -1; + if (s->type == CX18_ENC_STREAM_TYPE_IDX) { + /* + * The IDX stream is only used internally, and can + * only be indirectly unclaimed by unclaiming the MPG stream. + */ + return; + } + + if (s->type == CX18_ENC_STREAM_TYPE_VBI && + test_bit(CX18_F_S_INTERNAL_USE, &s->s_flags)) { + /* this stream is still in use internally */ + return; + } + if (!test_and_clear_bit(CX18_F_S_CLAIMED, &s->s_flags)) { + CX18_DEBUG_WARN("Release stream %s not in use!\n", s->name); + return; + } + + cx18_flush_queues(s); + + /* + * CX18_ENC_STREAM_TYPE_MPG needs to release the + * CX18_ENC_STREAM_TYPE_VBI and/or CX18_ENC_STREAM_TYPE_IDX streams. + * + * For all other streams we're done. + */ + if (s->type != CX18_ENC_STREAM_TYPE_MPG) + return; + + /* Unclaim the associated MPEG Index stream */ + s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; + if (test_and_clear_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags)) { + clear_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags); + cx18_flush_queues(s_assoc); + } + + /* Unclaim the associated VBI stream */ + s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + if (test_and_clear_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags)) { + if (s_assoc->id == -1) { + /* + * The VBI stream is not still claimed by a file + * descriptor, so completely unclaim it. + */ + clear_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags); + cx18_flush_queues(s_assoc); + } + } +} +EXPORT_SYMBOL(cx18_release_stream); + +static void cx18_dualwatch(struct cx18 *cx) +{ + struct v4l2_tuner vt; + u32 new_stereo_mode; + const u32 dual = 0x0200; + + new_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode); + memset(&vt, 0, sizeof(vt)); + cx18_call_all(cx, tuner, g_tuner, &vt); + if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 && + (vt.rxsubchans & V4L2_TUNER_SUB_LANG2)) + new_stereo_mode = dual; + + if (new_stereo_mode == cx->dualwatch_stereo_mode) + return; + + CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x.\n", + cx->dualwatch_stereo_mode, new_stereo_mode); + if (v4l2_ctrl_s_ctrl(cx->cxhdl.audio_mode, new_stereo_mode)) + CX18_DEBUG_INFO("dualwatch: changing stereo flag failed\n"); +} + + +static struct cx18_mdl *cx18_get_mdl(struct cx18_stream *s, int non_block, + int *err) +{ + struct cx18 *cx = s->cx; + struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + struct cx18_mdl *mdl; + DEFINE_WAIT(wait); + + *err = 0; + while (1) { + if (s->type == CX18_ENC_STREAM_TYPE_MPG) { + /* Process pending program updates and VBI data */ + if (time_after(jiffies, cx->dualwatch_jiffies + msecs_to_jiffies(1000))) { + cx->dualwatch_jiffies = jiffies; + cx18_dualwatch(cx); + } + if (test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) && + !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) { + while ((mdl = cx18_dequeue(s_vbi, + &s_vbi->q_full))) { + /* byteswap and process VBI data */ + cx18_process_vbi_data(cx, mdl, + s_vbi->type); + cx18_stream_put_mdl_fw(s_vbi, mdl); + } + } + mdl = &cx->vbi.sliced_mpeg_mdl; + if (mdl->readpos != mdl->bytesused) + return mdl; + } + + /* do we have new data? */ + mdl = cx18_dequeue(s, &s->q_full); + if (mdl) { + if (!test_and_clear_bit(CX18_F_M_NEED_SWAP, + &mdl->m_flags)) + return mdl; + if (s->type == CX18_ENC_STREAM_TYPE_MPG) + /* byteswap MPG data */ + cx18_mdl_swap(mdl); + else { + /* byteswap and process VBI data */ + cx18_process_vbi_data(cx, mdl, s->type); + } + return mdl; + } + + /* return if end of stream */ + if (!test_bit(CX18_F_S_STREAMING, &s->s_flags)) { + CX18_DEBUG_INFO("EOS %s\n", s->name); + return NULL; + } + + /* return if file was opened with O_NONBLOCK */ + if (non_block) { + *err = -EAGAIN; + return NULL; + } + + /* wait for more data to arrive */ + prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE); + /* New buffers might have become available before we were added + to the waitqueue */ + if (!atomic_read(&s->q_full.depth)) + schedule(); + finish_wait(&s->waitq, &wait); + if (signal_pending(current)) { + /* return if a signal was received */ + CX18_DEBUG_INFO("User stopped %s\n", s->name); + *err = -EINTR; + return NULL; + } + } +} + +static void cx18_setup_sliced_vbi_mdl(struct cx18 *cx) +{ + struct cx18_mdl *mdl = &cx->vbi.sliced_mpeg_mdl; + struct cx18_buffer *buf = &cx->vbi.sliced_mpeg_buf; + int idx = cx->vbi.inserted_frame % CX18_VBI_FRAMES; + + buf->buf = cx->vbi.sliced_mpeg_data[idx]; + buf->bytesused = cx->vbi.sliced_mpeg_size[idx]; + buf->readpos = 0; + + mdl->curr_buf = NULL; + mdl->bytesused = cx->vbi.sliced_mpeg_size[idx]; + mdl->readpos = 0; +} + +static size_t cx18_copy_buf_to_user(struct cx18_stream *s, + struct cx18_buffer *buf, char __user *ubuf, size_t ucount, bool *stop) +{ + struct cx18 *cx = s->cx; + size_t len = buf->bytesused - buf->readpos; + + *stop = false; + if (len > ucount) + len = ucount; + if (cx->vbi.insert_mpeg && s->type == CX18_ENC_STREAM_TYPE_MPG && + !cx18_raw_vbi(cx) && buf != &cx->vbi.sliced_mpeg_buf) { + /* + * Try to find a good splice point in the PS, just before + * an MPEG-2 Program Pack start code, and provide only + * up to that point to the user, so it's easy to insert VBI data + * the next time around. + * + * This will not work for an MPEG-2 TS and has only been + * verified by analysis to work for an MPEG-2 PS. Helen Buus + * pointed out this works for the CX23416 MPEG-2 DVD compatible + * stream, and research indicates both the MPEG 2 SVCD and DVD + * stream types use an MPEG-2 PS container. + */ + /* + * An MPEG-2 Program Stream (PS) is a series of + * MPEG-2 Program Packs terminated by an + * MPEG Program End Code after the last Program Pack. + * A Program Pack may hold a PS System Header packet and any + * number of Program Elementary Stream (PES) Packets + */ + const char *start = buf->buf + buf->readpos; + const char *p = start + 1; + const u8 *q; + u8 ch = cx->search_pack_header ? 0xba : 0xe0; + int stuffing, i; + + while (start + len > p) { + /* Scan for a 0 to find a potential MPEG-2 start code */ + q = memchr(p, 0, start + len - p); + if (q == NULL) + break; + p = q + 1; + /* + * Keep looking if not a + * MPEG-2 Pack header start code: 0x00 0x00 0x01 0xba + * or MPEG-2 video PES start code: 0x00 0x00 0x01 0xe0 + */ + if ((char *)q + 15 >= buf->buf + buf->bytesused || + q[1] != 0 || q[2] != 1 || q[3] != ch) + continue; + + /* If expecting the primary video PES */ + if (!cx->search_pack_header) { + /* Continue if it couldn't be a PES packet */ + if ((q[6] & 0xc0) != 0x80) + continue; + /* Check if a PTS or PTS & DTS follow */ + if (((q[7] & 0xc0) == 0x80 && /* PTS only */ + (q[9] & 0xf0) == 0x20) || /* PTS only */ + ((q[7] & 0xc0) == 0xc0 && /* PTS & DTS */ + (q[9] & 0xf0) == 0x30)) { /* DTS follows */ + /* Assume we found the video PES hdr */ + ch = 0xba; /* next want a Program Pack*/ + cx->search_pack_header = 1; + p = q + 9; /* Skip this video PES hdr */ + } + continue; + } + + /* We may have found a Program Pack start code */ + + /* Get the count of stuffing bytes & verify them */ + stuffing = q[13] & 7; + /* all stuffing bytes must be 0xff */ + for (i = 0; i < stuffing; i++) + if (q[14 + i] != 0xff) + break; + if (i == stuffing && /* right number of stuffing bytes*/ + (q[4] & 0xc4) == 0x44 && /* marker check */ + (q[12] & 3) == 3 && /* marker check */ + q[14 + stuffing] == 0 && /* PES Pack or Sys Hdr */ + q[15 + stuffing] == 0 && + q[16 + stuffing] == 1) { + /* We declare we actually found a Program Pack*/ + cx->search_pack_header = 0; /* expect vid PES */ + len = (char *)q - start; + cx18_setup_sliced_vbi_mdl(cx); + *stop = true; + break; + } + } + } + if (copy_to_user(ubuf, (u8 *)buf->buf + buf->readpos, len)) { + CX18_DEBUG_WARN("copy %zd bytes to user failed for %s\n", + len, s->name); + return -EFAULT; + } + buf->readpos += len; + if (s->type == CX18_ENC_STREAM_TYPE_MPG && + buf != &cx->vbi.sliced_mpeg_buf) + cx->mpg_data_received += len; + return len; +} + +static size_t cx18_copy_mdl_to_user(struct cx18_stream *s, + struct cx18_mdl *mdl, char __user *ubuf, size_t ucount) +{ + size_t tot_written = 0; + int rc; + bool stop = false; + + if (mdl->curr_buf == NULL) + mdl->curr_buf = list_first_entry(&mdl->buf_list, + struct cx18_buffer, list); + + if (list_entry_is_past_end(mdl->curr_buf, &mdl->buf_list, list)) { + /* + * For some reason we've exhausted the buffers, but the MDL + * object still said some data was unread. + * Fix that and bail out. + */ + mdl->readpos = mdl->bytesused; + return 0; + } + + list_for_each_entry_from(mdl->curr_buf, &mdl->buf_list, list) { + + if (mdl->curr_buf->readpos >= mdl->curr_buf->bytesused) + continue; + + rc = cx18_copy_buf_to_user(s, mdl->curr_buf, ubuf + tot_written, + ucount - tot_written, &stop); + if (rc < 0) + return rc; + mdl->readpos += rc; + tot_written += rc; + + if (stop || /* Forced stopping point for VBI insertion */ + tot_written >= ucount || /* Reader request statisfied */ + mdl->curr_buf->readpos < mdl->curr_buf->bytesused || + mdl->readpos >= mdl->bytesused) /* MDL buffers drained */ + break; + } + return tot_written; +} + +static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, + size_t tot_count, int non_block) +{ + struct cx18 *cx = s->cx; + size_t tot_written = 0; + int single_frame = 0; + + if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) { + /* shouldn't happen */ + CX18_DEBUG_WARN("Stream %s not initialized before read\n", + s->name); + return -EIO; + } + + /* Each VBI buffer is one frame, the v4l2 API says that for VBI the + frames should arrive one-by-one, so make sure we never output more + than one VBI frame at a time */ + if (s->type == CX18_ENC_STREAM_TYPE_VBI && !cx18_raw_vbi(cx)) + single_frame = 1; + + for (;;) { + struct cx18_mdl *mdl; + int rc; + + mdl = cx18_get_mdl(s, non_block, &rc); + /* if there is no data available... */ + if (mdl == NULL) { + /* if we got data, then return that regardless */ + if (tot_written) + break; + /* EOS condition */ + if (rc == 0) { + clear_bit(CX18_F_S_STREAMOFF, &s->s_flags); + clear_bit(CX18_F_S_APPL_IO, &s->s_flags); + cx18_release_stream(s); + } + /* set errno */ + return rc; + } + + rc = cx18_copy_mdl_to_user(s, mdl, ubuf + tot_written, + tot_count - tot_written); + + if (mdl != &cx->vbi.sliced_mpeg_mdl) { + if (mdl->readpos == mdl->bytesused) + cx18_stream_put_mdl_fw(s, mdl); + else + cx18_push(s, mdl, &s->q_full); + } else if (mdl->readpos == mdl->bytesused) { + int idx = cx->vbi.inserted_frame % CX18_VBI_FRAMES; + + cx->vbi.sliced_mpeg_size[idx] = 0; + cx->vbi.inserted_frame++; + cx->vbi_data_inserted += mdl->bytesused; + } + if (rc < 0) + return rc; + tot_written += rc; + + if (tot_written == tot_count || single_frame) + break; + } + return tot_written; +} + +static ssize_t cx18_read_pos(struct cx18_stream *s, char __user *ubuf, + size_t count, loff_t *pos, int non_block) +{ + ssize_t rc = count ? cx18_read(s, ubuf, count, non_block) : 0; + struct cx18 *cx = s->cx; + + CX18_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc); + if (rc > 0) + pos += rc; + return rc; +} + +int cx18_start_capture(struct cx18_open_id *id) +{ + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + struct cx18_stream *s_vbi; + struct cx18_stream *s_idx; + + if (s->type == CX18_ENC_STREAM_TYPE_RAD) { + /* you cannot read from these stream types. */ + return -EPERM; + } + + /* Try to claim this stream. */ + if (cx18_claim_stream(id, s->type)) + return -EBUSY; + + /* If capture is already in progress, then we also have to + do nothing extra. */ + if (test_bit(CX18_F_S_STREAMOFF, &s->s_flags) || + test_and_set_bit(CX18_F_S_STREAMING, &s->s_flags)) { + set_bit(CX18_F_S_APPL_IO, &s->s_flags); + return 0; + } + + /* Start associated VBI or IDX stream capture if required */ + s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; + if (s->type == CX18_ENC_STREAM_TYPE_MPG) { + /* + * The VBI and IDX streams should have been claimed + * automatically, if for internal use, when the MPG stream was + * claimed. We only need to start these streams capturing. + */ + if (test_bit(CX18_F_S_INTERNAL_USE, &s_idx->s_flags) && + !test_and_set_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) { + if (cx18_start_v4l2_encode_stream(s_idx)) { + CX18_DEBUG_WARN("IDX capture start failed\n"); + clear_bit(CX18_F_S_STREAMING, &s_idx->s_flags); + goto start_failed; + } + CX18_DEBUG_INFO("IDX capture started\n"); + } + if (test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) && + !test_and_set_bit(CX18_F_S_STREAMING, &s_vbi->s_flags)) { + if (cx18_start_v4l2_encode_stream(s_vbi)) { + CX18_DEBUG_WARN("VBI capture start failed\n"); + clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags); + goto start_failed; + } + CX18_DEBUG_INFO("VBI insertion started\n"); + } + } + + /* Tell the card to start capturing */ + if (!cx18_start_v4l2_encode_stream(s)) { + /* We're done */ + set_bit(CX18_F_S_APPL_IO, &s->s_flags); + /* Resume a possibly paused encoder */ + if (test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) + cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, s->handle); + return 0; + } + +start_failed: + CX18_DEBUG_WARN("Failed to start capturing for stream %s\n", s->name); + + /* + * The associated VBI and IDX streams for internal use are released + * automatically when the MPG stream is released. We only need to stop + * the associated stream. + */ + if (s->type == CX18_ENC_STREAM_TYPE_MPG) { + /* Stop the IDX stream which is always for internal use */ + if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) { + cx18_stop_v4l2_encode_stream(s_idx, 0); + clear_bit(CX18_F_S_STREAMING, &s_idx->s_flags); + } + /* Stop the VBI stream, if only running for internal use */ + if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) && + !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) { + cx18_stop_v4l2_encode_stream(s_vbi, 0); + clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags); + } + } + clear_bit(CX18_F_S_STREAMING, &s->s_flags); + cx18_release_stream(s); /* Also releases associated streams */ + return -EIO; +} + +ssize_t cx18_v4l2_read(struct file *filp, char __user *buf, size_t count, + loff_t *pos) +{ + struct cx18_open_id *id = file2id(filp); + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + int rc; + + CX18_DEBUG_HI_FILE("read %zd bytes from %s\n", count, s->name); + + mutex_lock(&cx->serialize_lock); + rc = cx18_start_capture(id); + mutex_unlock(&cx->serialize_lock); + if (rc) + return rc; + + if ((s->vb_type == V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (id->type == CX18_ENC_STREAM_TYPE_YUV)) { + return videobuf_read_stream(&s->vbuf_q, buf, count, pos, 0, + filp->f_flags & O_NONBLOCK); + } + + return cx18_read_pos(s, buf, count, pos, filp->f_flags & O_NONBLOCK); +} + +unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait) +{ + struct cx18_open_id *id = file2id(filp); + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + int eof = test_bit(CX18_F_S_STREAMOFF, &s->s_flags); + + /* Start a capture if there is none */ + if (!eof && !test_bit(CX18_F_S_STREAMING, &s->s_flags)) { + int rc; + + mutex_lock(&cx->serialize_lock); + rc = cx18_start_capture(id); + mutex_unlock(&cx->serialize_lock); + if (rc) { + CX18_DEBUG_INFO("Could not start capture for %s (%d)\n", + s->name, rc); + return POLLERR; + } + CX18_DEBUG_FILE("Encoder poll started capture\n"); + } + + if ((s->vb_type == V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (id->type == CX18_ENC_STREAM_TYPE_YUV)) { + int videobuf_poll = videobuf_poll_stream(filp, &s->vbuf_q, wait); + if (eof && videobuf_poll == POLLERR) + return POLLHUP; + else + return videobuf_poll; + } + + /* add stream's waitq to the poll list */ + CX18_DEBUG_HI_FILE("Encoder poll\n"); + poll_wait(filp, &s->waitq, wait); + + if (atomic_read(&s->q_full.depth)) + return POLLIN | POLLRDNORM; + if (eof) + return POLLHUP; + return 0; +} + +int cx18_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct cx18_open_id *id = file->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + int eof = test_bit(CX18_F_S_STREAMOFF, &s->s_flags); + + if ((s->vb_type == V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (id->type == CX18_ENC_STREAM_TYPE_YUV)) { + + /* Start a capture if there is none */ + if (!eof && !test_bit(CX18_F_S_STREAMING, &s->s_flags)) { + int rc; + + mutex_lock(&cx->serialize_lock); + rc = cx18_start_capture(id); + mutex_unlock(&cx->serialize_lock); + if (rc) { + CX18_DEBUG_INFO( + "Could not start capture for %s (%d)\n", + s->name, rc); + return -EINVAL; + } + CX18_DEBUG_FILE("Encoder mmap started capture\n"); + } + + return videobuf_mmap_mapper(&s->vbuf_q, vma); + } + + return -EINVAL; +} + +void cx18_vb_timeout(unsigned long data) +{ + struct cx18_stream *s = (struct cx18_stream *)data; + struct cx18_videobuf_buffer *buf; + unsigned long flags; + + /* Return all of the buffers in error state, so the vbi/vid inode + * can return from blocking. + */ + spin_lock_irqsave(&s->vb_lock, flags); + while (!list_empty(&s->vb_capture)) { + buf = list_entry(s->vb_capture.next, + struct cx18_videobuf_buffer, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + } + spin_unlock_irqrestore(&s->vb_lock, flags); +} + +void cx18_stop_capture(struct cx18_open_id *id, int gop_end) +{ + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + struct cx18_stream *s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; + + CX18_DEBUG_IOCTL("close() of %s\n", s->name); + + /* 'Unclaim' this stream */ + + /* Stop capturing */ + if (test_bit(CX18_F_S_STREAMING, &s->s_flags)) { + CX18_DEBUG_INFO("close stopping capture\n"); + if (id->type == CX18_ENC_STREAM_TYPE_MPG) { + /* Stop internal use associated VBI and IDX streams */ + if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) && + !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) { + CX18_DEBUG_INFO("close stopping embedded VBI " + "capture\n"); + cx18_stop_v4l2_encode_stream(s_vbi, 0); + } + if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) { + CX18_DEBUG_INFO("close stopping IDX capture\n"); + cx18_stop_v4l2_encode_stream(s_idx, 0); + } + } + if (id->type == CX18_ENC_STREAM_TYPE_VBI && + test_bit(CX18_F_S_INTERNAL_USE, &s->s_flags)) + /* Also used internally, don't stop capturing */ + s->id = -1; + else + cx18_stop_v4l2_encode_stream(s, gop_end); + } + if (!gop_end) { + clear_bit(CX18_F_S_APPL_IO, &s->s_flags); + clear_bit(CX18_F_S_STREAMOFF, &s->s_flags); + cx18_release_stream(s); + } +} + +int cx18_v4l2_close(struct file *filp) +{ + struct v4l2_fh *fh = filp->private_data; + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + CX18_DEBUG_IOCTL("close() of %s\n", s->name); + + mutex_lock(&cx->serialize_lock); + /* Stop radio */ + if (id->type == CX18_ENC_STREAM_TYPE_RAD && + v4l2_fh_is_singular_file(filp)) { + /* Closing radio device, return to TV mode */ + cx18_mute(cx); + /* Mark that the radio is no longer in use */ + clear_bit(CX18_F_I_RADIO_USER, &cx->i_flags); + /* Switch tuner to TV */ + cx18_call_all(cx, core, s_std, cx->std); + /* Select correct audio input (i.e. TV tuner or Line in) */ + cx18_audio_set_io(cx); + if (atomic_read(&cx->ana_capturing) > 0) { + /* Undo video mute */ + cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, + (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute) | + (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute_yuv) << 8))); + } + /* Done! Unmute and continue. */ + cx18_unmute(cx); + } + + v4l2_fh_del(fh); + v4l2_fh_exit(fh); + + /* 'Unclaim' this stream */ + if (s->id == id->open_id) + cx18_stop_capture(id, 0); + kfree(id); + mutex_unlock(&cx->serialize_lock); + return 0; +} + +static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) +{ + struct cx18 *cx = s->cx; + struct cx18_open_id *item; + + CX18_DEBUG_FILE("open %s\n", s->name); + + /* Allocate memory */ + item = kzalloc(sizeof(struct cx18_open_id), GFP_KERNEL); + if (NULL == item) { + CX18_DEBUG_WARN("nomem on v4l2 open\n"); + return -ENOMEM; + } + v4l2_fh_init(&item->fh, s->video_dev); + + item->cx = cx; + item->type = s->type; + + item->open_id = cx->open_id++; + filp->private_data = &item->fh; + v4l2_fh_add(&item->fh); + + if (item->type == CX18_ENC_STREAM_TYPE_RAD && + v4l2_fh_is_singular_file(filp)) { + if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { + if (atomic_read(&cx->ana_capturing) > 0) { + /* switching to radio while capture is + in progress is not polite */ + v4l2_fh_del(&item->fh); + v4l2_fh_exit(&item->fh); + kfree(item); + return -EBUSY; + } + } + + /* Mark that the radio is being used. */ + set_bit(CX18_F_I_RADIO_USER, &cx->i_flags); + /* We have the radio */ + cx18_mute(cx); + /* Switch tuner to radio */ + cx18_call_all(cx, tuner, s_radio); + /* Select the correct audio input (i.e. radio tuner) */ + cx18_audio_set_io(cx); + /* Done! Unmute and continue. */ + cx18_unmute(cx); + } + return 0; +} + +int cx18_v4l2_open(struct file *filp) +{ + int res; + struct video_device *video_dev = video_devdata(filp); + struct cx18_stream *s = video_get_drvdata(video_dev); + struct cx18 *cx = s->cx; + + mutex_lock(&cx->serialize_lock); + if (cx18_init_on_first_open(cx)) { + CX18_ERR("Failed to initialize on %s\n", + video_device_node_name(video_dev)); + mutex_unlock(&cx->serialize_lock); + return -ENXIO; + } + res = cx18_serialized_open(s, filp); + mutex_unlock(&cx->serialize_lock); + return res; +} + +void cx18_mute(struct cx18 *cx) +{ + u32 h; + if (atomic_read(&cx->ana_capturing)) { + h = cx18_find_handle(cx); + if (h != CX18_INVALID_TASK_HANDLE) + cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, h, 1); + else + CX18_ERR("Can't find valid task handle for mute\n"); + } + CX18_DEBUG_INFO("Mute\n"); +} + +void cx18_unmute(struct cx18 *cx) +{ + u32 h; + if (atomic_read(&cx->ana_capturing)) { + h = cx18_find_handle(cx); + if (h != CX18_INVALID_TASK_HANDLE) { + cx18_msleep_timeout(100, 0); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, h, 12); + cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, h, 0); + } else + CX18_ERR("Can't find valid task handle for unmute\n"); + } + CX18_DEBUG_INFO("Unmute\n"); +} diff --git a/drivers/media/pci/cx18/cx18-fileops.h b/drivers/media/pci/cx18/cx18-fileops.h new file mode 100644 index 00000000..b9e5110a --- /dev/null +++ b/drivers/media/pci/cx18/cx18-fileops.h @@ -0,0 +1,41 @@ +/* + * cx18 file operation functions + * + * Derived from ivtv-fileops.h + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +/* Testing/Debugging */ +int cx18_v4l2_open(struct file *filp); +ssize_t cx18_v4l2_read(struct file *filp, char __user *buf, size_t count, + loff_t *pos); +ssize_t cx18_v4l2_write(struct file *filp, const char __user *buf, size_t count, + loff_t *pos); +int cx18_v4l2_close(struct file *filp); +unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait); +int cx18_start_capture(struct cx18_open_id *id); +void cx18_stop_capture(struct cx18_open_id *id, int gop_end); +void cx18_mute(struct cx18 *cx); +void cx18_unmute(struct cx18 *cx); +int cx18_v4l2_mmap(struct file *file, struct vm_area_struct *vma); +void cx18_vb_timeout(unsigned long data); + +/* Shared with cx18-alsa module */ +int cx18_claim_stream(struct cx18_open_id *id, int type); +void cx18_release_stream(struct cx18_stream *s); diff --git a/drivers/media/pci/cx18/cx18-firmware.c b/drivers/media/pci/cx18/cx18-firmware.c new file mode 100644 index 00000000..a1c1cec0 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-firmware.c @@ -0,0 +1,459 @@ +/* + * cx18 firmware functions + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-scb.h" +#include "cx18-irq.h" +#include "cx18-firmware.h" +#include "cx18-cards.h" +#include + +#define CX18_PROC_SOFT_RESET 0xc70010 +#define CX18_DDR_SOFT_RESET 0xc70014 +#define CX18_CLOCK_SELECT1 0xc71000 +#define CX18_CLOCK_SELECT2 0xc71004 +#define CX18_HALF_CLOCK_SELECT1 0xc71008 +#define CX18_HALF_CLOCK_SELECT2 0xc7100C +#define CX18_CLOCK_POLARITY1 0xc71010 +#define CX18_CLOCK_POLARITY2 0xc71014 +#define CX18_ADD_DELAY_ENABLE1 0xc71018 +#define CX18_ADD_DELAY_ENABLE2 0xc7101C +#define CX18_CLOCK_ENABLE1 0xc71020 +#define CX18_CLOCK_ENABLE2 0xc71024 + +#define CX18_REG_BUS_TIMEOUT_EN 0xc72024 + +#define CX18_FAST_CLOCK_PLL_INT 0xc78000 +#define CX18_FAST_CLOCK_PLL_FRAC 0xc78004 +#define CX18_FAST_CLOCK_PLL_POST 0xc78008 +#define CX18_FAST_CLOCK_PLL_PRESCALE 0xc7800C +#define CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH 0xc78010 + +#define CX18_SLOW_CLOCK_PLL_INT 0xc78014 +#define CX18_SLOW_CLOCK_PLL_FRAC 0xc78018 +#define CX18_SLOW_CLOCK_PLL_POST 0xc7801C +#define CX18_MPEG_CLOCK_PLL_INT 0xc78040 +#define CX18_MPEG_CLOCK_PLL_FRAC 0xc78044 +#define CX18_MPEG_CLOCK_PLL_POST 0xc78048 +#define CX18_PLL_POWER_DOWN 0xc78088 +#define CX18_SW1_INT_STATUS 0xc73104 +#define CX18_SW1_INT_ENABLE_PCI 0xc7311C +#define CX18_SW2_INT_SET 0xc73140 +#define CX18_SW2_INT_STATUS 0xc73144 +#define CX18_ADEC_CONTROL 0xc78120 + +#define CX18_DDR_REQUEST_ENABLE 0xc80000 +#define CX18_DDR_CHIP_CONFIG 0xc80004 +#define CX18_DDR_REFRESH 0xc80008 +#define CX18_DDR_TIMING1 0xc8000C +#define CX18_DDR_TIMING2 0xc80010 +#define CX18_DDR_POWER_REG 0xc8001C + +#define CX18_DDR_TUNE_LANE 0xc80048 +#define CX18_DDR_INITIAL_EMRS 0xc80054 +#define CX18_DDR_MB_PER_ROW_7 0xc8009C +#define CX18_DDR_BASE_63_ADDR 0xc804FC + +#define CX18_WMB_CLIENT02 0xc90108 +#define CX18_WMB_CLIENT05 0xc90114 +#define CX18_WMB_CLIENT06 0xc90118 +#define CX18_WMB_CLIENT07 0xc9011C +#define CX18_WMB_CLIENT08 0xc90120 +#define CX18_WMB_CLIENT09 0xc90124 +#define CX18_WMB_CLIENT10 0xc90128 +#define CX18_WMB_CLIENT11 0xc9012C +#define CX18_WMB_CLIENT12 0xc90130 +#define CX18_WMB_CLIENT13 0xc90134 +#define CX18_WMB_CLIENT14 0xc90138 + +#define CX18_DSP0_INTERRUPT_MASK 0xd0004C + +#define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */ +#define APU_ROM_SYNC2 0x72646548 /* "rdeH" */ + +struct cx18_apu_rom_seghdr { + u32 sync1; + u32 sync2; + u32 addr; + u32 size; +}; + +static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx) +{ + const struct firmware *fw = NULL; + int i, j; + unsigned size; + u32 __iomem *dst = (u32 __iomem *)mem; + const u32 *src; + + if (request_firmware(&fw, fn, &cx->pci_dev->dev)) { + CX18_ERR("Unable to open firmware %s\n", fn); + CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n"); + return -ENOMEM; + } + + src = (const u32 *)fw->data; + + for (i = 0; i < fw->size; i += 4096) { + cx18_setup_page(cx, i); + for (j = i; j < fw->size && j < i + 4096; j += 4) { + /* no need for endianness conversion on the ppc */ + cx18_raw_writel(cx, *src, dst); + if (cx18_raw_readl(cx, dst) != *src) { + CX18_ERR("Mismatch at offset %x\n", i); + release_firmware(fw); + cx18_setup_page(cx, 0); + return -EIO; + } + dst++; + src++; + } + } + if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags)) + CX18_INFO("loaded %s firmware (%zd bytes)\n", fn, fw->size); + size = fw->size; + release_firmware(fw); + cx18_setup_page(cx, SCB_OFFSET); + return size; +} + +static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx, + u32 *entry_addr) +{ + const struct firmware *fw = NULL; + int i, j; + unsigned size; + const u32 *src; + struct cx18_apu_rom_seghdr seghdr; + const u8 *vers; + u32 offset = 0; + u32 apu_version = 0; + int sz; + + if (request_firmware(&fw, fn, &cx->pci_dev->dev)) { + CX18_ERR("unable to open firmware %s\n", fn); + CX18_ERR("did you put the firmware in the hotplug firmware directory?\n"); + cx18_setup_page(cx, 0); + return -ENOMEM; + } + + *entry_addr = 0; + src = (const u32 *)fw->data; + vers = fw->data + sizeof(seghdr); + sz = fw->size; + + apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32]; + while (offset + sizeof(seghdr) < fw->size) { + const u32 *shptr = src + offset / 4; + + seghdr.sync1 = le32_to_cpu(shptr[0]); + seghdr.sync2 = le32_to_cpu(shptr[1]); + seghdr.addr = le32_to_cpu(shptr[2]); + seghdr.size = le32_to_cpu(shptr[3]); + + offset += sizeof(seghdr); + if (seghdr.sync1 != APU_ROM_SYNC1 || + seghdr.sync2 != APU_ROM_SYNC2) { + offset += seghdr.size; + continue; + } + CX18_DEBUG_INFO("load segment %x-%x\n", seghdr.addr, + seghdr.addr + seghdr.size - 1); + if (*entry_addr == 0) + *entry_addr = seghdr.addr; + if (offset + seghdr.size > sz) + break; + for (i = 0; i < seghdr.size; i += 4096) { + cx18_setup_page(cx, seghdr.addr + i); + for (j = i; j < seghdr.size && j < i + 4096; j += 4) { + /* no need for endianness conversion on the ppc */ + cx18_raw_writel(cx, src[(offset + j) / 4], + dst + seghdr.addr + j); + if (cx18_raw_readl(cx, dst + seghdr.addr + j) + != src[(offset + j) / 4]) { + CX18_ERR("Mismatch at offset %x\n", + offset + j); + release_firmware(fw); + cx18_setup_page(cx, 0); + return -EIO; + } + } + } + offset += seghdr.size; + } + if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags)) + CX18_INFO("loaded %s firmware V%08x (%zd bytes)\n", + fn, apu_version, fw->size); + size = fw->size; + release_firmware(fw); + cx18_setup_page(cx, 0); + return size; +} + +void cx18_halt_firmware(struct cx18 *cx) +{ + CX18_DEBUG_INFO("Preparing for firmware halt.\n"); + cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET, + 0x0000000F, 0x000F000F); + cx18_write_reg_expect(cx, 0x00020002, CX18_ADEC_CONTROL, + 0x00000002, 0x00020002); +} + +void cx18_init_power(struct cx18 *cx, int lowpwr) +{ + /* power-down Spare and AOM PLLs */ + /* power-up fast, slow and mpeg PLLs */ + cx18_write_reg(cx, 0x00000008, CX18_PLL_POWER_DOWN); + + /* ADEC out of sleep */ + cx18_write_reg_expect(cx, 0x00020000, CX18_ADEC_CONTROL, + 0x00000000, 0x00020002); + + /* + * The PLL parameters are based on the external crystal frequency that + * would ideally be: + * + * NTSC Color subcarrier freq * 8 = + * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz + * + * The accidents of history and rationale that explain from where this + * combination of magic numbers originate can be found in: + * + * [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in + * the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80 + * + * [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the + * NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83 + * + * As Mike Bradley has rightly pointed out, it's not the exact crystal + * frequency that matters, only that all parts of the driver and + * firmware are using the same value (close to the ideal value). + * + * Since I have a strong suspicion that, if the firmware ever assumes a + * crystal value at all, it will assume 28.636360 MHz, the crystal + * freq used in calculations in this driver will be: + * + * xtal_freq = 28.636360 MHz + * + * an error of less than 0.13 ppm which is way, way better than any off + * the shelf crystal will have for accuracy anyway. + * + * Below I aim to run the PLLs' VCOs near 400 MHz to minimze errors. + * + * Many thanks to Jeff Campbell and Mike Bradley for their extensive + * investigation, experimentation, testing, and suggested solutions of + * of audio/video sync problems with SVideo and CVBS captures. + */ + + /* the fast clock is at 200/245 MHz */ + /* 1 * xtal_freq * 0x0d.f7df9b8 / 2 = 200 MHz: 400 MHz pre post-divide*/ + /* 1 * xtal_freq * 0x11.1c71eb8 / 2 = 245 MHz: 490 MHz pre post-divide*/ + cx18_write_reg(cx, lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT); + cx18_write_reg(cx, lowpwr ? 0x1EFBF37 : 0x038E3D7, + CX18_FAST_CLOCK_PLL_FRAC); + + cx18_write_reg(cx, 2, CX18_FAST_CLOCK_PLL_POST); + cx18_write_reg(cx, 1, CX18_FAST_CLOCK_PLL_PRESCALE); + cx18_write_reg(cx, 4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH); + + /* set slow clock to 125/120 MHz */ + /* xtal_freq * 0x0d.1861a20 / 3 = 125 MHz: 375 MHz before post-divide */ + /* xtal_freq * 0x0c.92493f8 / 3 = 120 MHz: 360 MHz before post-divide */ + cx18_write_reg(cx, lowpwr ? 0xD : 0xC, CX18_SLOW_CLOCK_PLL_INT); + cx18_write_reg(cx, lowpwr ? 0x30C344 : 0x124927F, + CX18_SLOW_CLOCK_PLL_FRAC); + cx18_write_reg(cx, 3, CX18_SLOW_CLOCK_PLL_POST); + + /* mpeg clock pll 54MHz */ + /* xtal_freq * 0xf.15f17f0 / 8 = 54 MHz: 432 MHz before post-divide */ + cx18_write_reg(cx, 0xF, CX18_MPEG_CLOCK_PLL_INT); + cx18_write_reg(cx, 0x2BE2FE, CX18_MPEG_CLOCK_PLL_FRAC); + cx18_write_reg(cx, 8, CX18_MPEG_CLOCK_PLL_POST); + + /* Defaults */ + /* APU = SC or SC/2 = 125/62.5 */ + /* EPU = SC = 125 */ + /* DDR = FC = 180 */ + /* ENC = SC = 125 */ + /* AI1 = SC = 125 */ + /* VIM2 = disabled */ + /* PCI = FC/2 = 90 */ + /* AI2 = disabled */ + /* DEMUX = disabled */ + /* AO = SC/2 = 62.5 */ + /* SER = 54MHz */ + /* VFC = disabled */ + /* USB = disabled */ + + if (lowpwr) { + cx18_write_reg_expect(cx, 0xFFFF0020, CX18_CLOCK_SELECT1, + 0x00000020, 0xFFFFFFFF); + cx18_write_reg_expect(cx, 0xFFFF0004, CX18_CLOCK_SELECT2, + 0x00000004, 0xFFFFFFFF); + } else { + /* This doesn't explicitly set every clock select */ + cx18_write_reg_expect(cx, 0x00060004, CX18_CLOCK_SELECT1, + 0x00000004, 0x00060006); + cx18_write_reg_expect(cx, 0x00060006, CX18_CLOCK_SELECT2, + 0x00000006, 0x00060006); + } + + cx18_write_reg_expect(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1, + 0x00000002, 0xFFFFFFFF); + cx18_write_reg_expect(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2, + 0x00000104, 0xFFFFFFFF); + cx18_write_reg_expect(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1, + 0x00009026, 0xFFFFFFFF); + cx18_write_reg_expect(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2, + 0x00003105, 0xFFFFFFFF); +} + +void cx18_init_memory(struct cx18 *cx) +{ + cx18_msleep_timeout(10, 0); + cx18_write_reg_expect(cx, 0x00010000, CX18_DDR_SOFT_RESET, + 0x00000000, 0x00010001); + cx18_msleep_timeout(10, 0); + + cx18_write_reg(cx, cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG); + + cx18_msleep_timeout(10, 0); + + cx18_write_reg(cx, cx->card->ddr.refresh, CX18_DDR_REFRESH); + cx18_write_reg(cx, cx->card->ddr.timing1, CX18_DDR_TIMING1); + cx18_write_reg(cx, cx->card->ddr.timing2, CX18_DDR_TIMING2); + + cx18_msleep_timeout(10, 0); + + /* Initialize DQS pad time */ + cx18_write_reg(cx, cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE); + cx18_write_reg(cx, cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS); + + cx18_msleep_timeout(10, 0); + + cx18_write_reg_expect(cx, 0x00020000, CX18_DDR_SOFT_RESET, + 0x00000000, 0x00020002); + cx18_msleep_timeout(10, 0); + + /* use power-down mode when idle */ + cx18_write_reg(cx, 0x00000010, CX18_DDR_POWER_REG); + + cx18_write_reg_expect(cx, 0x00010001, CX18_REG_BUS_TIMEOUT_EN, + 0x00000001, 0x00010001); + + cx18_write_reg(cx, 0x48, CX18_DDR_MB_PER_ROW_7); + cx18_write_reg(cx, 0xE0000, CX18_DDR_BASE_63_ADDR); + + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT02); /* AO */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT09); /* AI2 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT05); /* VIM1 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT06); /* AI1 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT07); /* 3D comb */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT10); /* ME */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT12); /* ENC */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT13); /* PK */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT11); /* RC */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT14); /* AVO */ +} + +#define CX18_CPU_FIRMWARE "v4l-cx23418-cpu.fw" +#define CX18_APU_FIRMWARE "v4l-cx23418-apu.fw" + +int cx18_firmware_init(struct cx18 *cx) +{ + u32 fw_entry_addr; + int sz, retries; + u32 api_args[MAX_MB_ARGUMENTS]; + + /* Allow chip to control CLKRUN */ + cx18_write_reg(cx, 0x5, CX18_DSP0_INTERRUPT_MASK); + + /* Stop the firmware */ + cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET, + 0x0000000F, 0x000F000F); + + cx18_msleep_timeout(1, 0); + + /* If the CPU is still running */ + if ((cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 8) == 0) { + CX18_ERR("%s: couldn't stop CPU to load firmware\n", __func__); + return -EIO; + } + + cx18_sw1_irq_enable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); + cx18_sw2_irq_enable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + + sz = load_cpu_fw_direct(CX18_CPU_FIRMWARE, cx->enc_mem, cx); + if (sz <= 0) + return sz; + + /* The SCB & IPC area *must* be correct before starting the firmwares */ + cx18_init_scb(cx); + + fw_entry_addr = 0; + sz = load_apu_fw_direct(CX18_APU_FIRMWARE, cx->enc_mem, cx, + &fw_entry_addr); + if (sz <= 0) + return sz; + + /* Start the CPU. The CPU will take care of the APU for us. */ + cx18_write_reg_expect(cx, 0x00080000, CX18_PROC_SOFT_RESET, + 0x00000000, 0x00080008); + + /* Wait up to 500 ms for the APU to come out of reset */ + for (retries = 0; + retries < 50 && (cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 1) == 1; + retries++) + cx18_msleep_timeout(10, 0); + + cx18_msleep_timeout(200, 0); + + if (retries == 50 && + (cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 1) == 1) { + CX18_ERR("Could not start the CPU\n"); + return -EIO; + } + + /* + * The CPU had once before set up to receive an interrupt for it's + * outgoing IRQ_CPU_TO_EPU_ACK to us. If it ever does this, we get an + * interrupt when it sends us an ack, but by the time we process it, + * that flag in the SW2 status register has been cleared by the CPU + * firmware. We'll prevent that not so useful condition from happening + * by clearing the CPU's interrupt enables for Ack IRQ's we want to + * process. + */ + cx18_sw2_irq_disable_cpu(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + + /* Try a benign command to see if the CPU is alive and well */ + sz = cx18_vapi_result(cx, api_args, CX18_CPU_DEBUG_PEEK32, 1, 0); + if (sz < 0) + return sz; + + /* initialize GPIO */ + cx18_write_reg_expect(cx, 0x14001400, 0xc78110, 0x00001400, 0x14001400); + return 0; +} + +MODULE_FIRMWARE(CX18_CPU_FIRMWARE); +MODULE_FIRMWARE(CX18_APU_FIRMWARE); diff --git a/drivers/media/pci/cx18/cx18-firmware.h b/drivers/media/pci/cx18/cx18-firmware.h new file mode 100644 index 00000000..38d4c05e --- /dev/null +++ b/drivers/media/pci/cx18/cx18-firmware.h @@ -0,0 +1,25 @@ +/* + * cx18 firmware functions + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int cx18_firmware_init(struct cx18 *cx); +void cx18_halt_firmware(struct cx18 *cx); +void cx18_init_memory(struct cx18 *cx); +void cx18_init_power(struct cx18 *cx, int lowpwr); diff --git a/drivers/media/pci/cx18/cx18-gpio.c b/drivers/media/pci/cx18/cx18-gpio.c new file mode 100644 index 00000000..5374aeb0 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-gpio.c @@ -0,0 +1,347 @@ +/* + * cx18 gpio functions + * + * Derived from ivtv-gpio.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-cards.h" +#include "cx18-gpio.h" +#include "tuner-xc2028.h" + +/********************* GPIO stuffs *********************/ + +/* GPIO registers */ +#define CX18_REG_GPIO_IN 0xc72010 +#define CX18_REG_GPIO_OUT1 0xc78100 +#define CX18_REG_GPIO_DIR1 0xc78108 +#define CX18_REG_GPIO_OUT2 0xc78104 +#define CX18_REG_GPIO_DIR2 0xc7810c + +/* + * HVR-1600 GPIO pins, courtesy of Hauppauge: + * + * gpio0: zilog ir process reset pin + * gpio1: zilog programming pin (you should never use this) + * gpio12: cx24227 reset pin + * gpio13: cs5345 reset pin +*/ + +/* + * File scope utility functions + */ +static void gpio_write(struct cx18 *cx) +{ + u32 dir_lo = cx->gpio_dir & 0xffff; + u32 val_lo = cx->gpio_val & 0xffff; + u32 dir_hi = cx->gpio_dir >> 16; + u32 val_hi = cx->gpio_val >> 16; + + cx18_write_reg_expect(cx, dir_lo << 16, + CX18_REG_GPIO_DIR1, ~dir_lo, dir_lo); + cx18_write_reg_expect(cx, (dir_lo << 16) | val_lo, + CX18_REG_GPIO_OUT1, val_lo, dir_lo); + cx18_write_reg_expect(cx, dir_hi << 16, + CX18_REG_GPIO_DIR2, ~dir_hi, dir_hi); + cx18_write_reg_expect(cx, (dir_hi << 16) | val_hi, + CX18_REG_GPIO_OUT2, val_hi, dir_hi); +} + +static void gpio_update(struct cx18 *cx, u32 mask, u32 data) +{ + if (mask == 0) + return; + + mutex_lock(&cx->gpio_lock); + cx->gpio_val = (cx->gpio_val & ~mask) | (data & mask); + gpio_write(cx); + mutex_unlock(&cx->gpio_lock); +} + +static void gpio_reset_seq(struct cx18 *cx, u32 active_lo, u32 active_hi, + unsigned int assert_msecs, + unsigned int recovery_msecs) +{ + u32 mask; + + mask = active_lo | active_hi; + if (mask == 0) + return; + + /* + * Assuming that active_hi and active_lo are a subsets of the bits in + * gpio_dir. Also assumes that active_lo and active_hi don't overlap + * in any bit position + */ + + /* Assert */ + gpio_update(cx, mask, ~active_lo); + schedule_timeout_uninterruptible(msecs_to_jiffies(assert_msecs)); + + /* Deassert */ + gpio_update(cx, mask, ~active_hi); + schedule_timeout_uninterruptible(msecs_to_jiffies(recovery_msecs)); +} + +/* + * GPIO Multiplexer - logical device + */ +static int gpiomux_log_status(struct v4l2_subdev *sd) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + + mutex_lock(&cx->gpio_lock); + CX18_INFO_DEV(sd, "GPIO: direction 0x%08x, value 0x%08x\n", + cx->gpio_dir, cx->gpio_val); + mutex_unlock(&cx->gpio_lock); + return 0; +} + +static int gpiomux_s_radio(struct v4l2_subdev *sd) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + + /* + * FIXME - work out the cx->active/audio_input mess - this is + * intended to handle the switch to radio mode and set the + * audio routing, but we need to update the state in cx + */ + gpio_update(cx, cx->card->gpio_audio_input.mask, + cx->card->gpio_audio_input.radio); + return 0; +} + +static int gpiomux_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + u32 data; + + switch (cx->card->audio_inputs[cx->audio_input].muxer_input) { + case 1: + data = cx->card->gpio_audio_input.linein; + break; + case 0: + data = cx->card->gpio_audio_input.tuner; + break; + default: + /* + * FIXME - work out the cx->active/audio_input mess - this is + * intended to handle the switch from radio mode and set the + * audio routing, but we need to update the state in cx + */ + data = cx->card->gpio_audio_input.tuner; + break; + } + gpio_update(cx, cx->card->gpio_audio_input.mask, data); + return 0; +} + +static int gpiomux_s_audio_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + u32 data; + + switch (input) { + case 0: + data = cx->card->gpio_audio_input.tuner; + break; + case 1: + data = cx->card->gpio_audio_input.linein; + break; + case 2: + data = cx->card->gpio_audio_input.radio; + break; + default: + return -EINVAL; + } + gpio_update(cx, cx->card->gpio_audio_input.mask, data); + return 0; +} + +static const struct v4l2_subdev_core_ops gpiomux_core_ops = { + .log_status = gpiomux_log_status, + .s_std = gpiomux_s_std, +}; + +static const struct v4l2_subdev_tuner_ops gpiomux_tuner_ops = { + .s_radio = gpiomux_s_radio, +}; + +static const struct v4l2_subdev_audio_ops gpiomux_audio_ops = { + .s_routing = gpiomux_s_audio_routing, +}; + +static const struct v4l2_subdev_ops gpiomux_ops = { + .core = &gpiomux_core_ops, + .tuner = &gpiomux_tuner_ops, + .audio = &gpiomux_audio_ops, +}; + +/* + * GPIO Reset Controller - logical device + */ +static int resetctrl_log_status(struct v4l2_subdev *sd) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + + mutex_lock(&cx->gpio_lock); + CX18_INFO_DEV(sd, "GPIO: direction 0x%08x, value 0x%08x\n", + cx->gpio_dir, cx->gpio_val); + mutex_unlock(&cx->gpio_lock); + return 0; +} + +static int resetctrl_reset(struct v4l2_subdev *sd, u32 val) +{ + struct cx18 *cx = v4l2_get_subdevdata(sd); + const struct cx18_gpio_i2c_slave_reset *p; + + p = &cx->card->gpio_i2c_slave_reset; + switch (val) { + case CX18_GPIO_RESET_I2C: + gpio_reset_seq(cx, p->active_lo_mask, p->active_hi_mask, + p->msecs_asserted, p->msecs_recovery); + break; + case CX18_GPIO_RESET_Z8F0811: + /* + * Assert timing for the Z8F0811 on HVR-1600 boards: + * 1. Assert RESET for min of 4 clock cycles at 18.432 MHz to + * initiate + * 2. Reset then takes 66 WDT cycles at 10 kHz + 16 xtal clock + * cycles (6,601,085 nanoseconds ~= 7 milliseconds) + * 3. DBG pin must be high before chip exits reset for normal + * operation. DBG is open drain and hopefully pulled high + * since we don't normally drive it (GPIO 1?) for the + * HVR-1600 + * 4. Z8F0811 won't exit reset until RESET is deasserted + * 5. Zilog comes out of reset, loads reset vector address and + * executes from there. Required recovery delay unknown. + */ + gpio_reset_seq(cx, p->ir_reset_mask, 0, + p->msecs_asserted, p->msecs_recovery); + break; + case CX18_GPIO_RESET_XC2028: + if (cx->card->tuners[0].tuner == TUNER_XC2028) + gpio_reset_seq(cx, (1 << cx->card->xceive_pin), 0, + 1, 1); + break; + } + return 0; +} + +static const struct v4l2_subdev_core_ops resetctrl_core_ops = { + .log_status = resetctrl_log_status, + .reset = resetctrl_reset, +}; + +static const struct v4l2_subdev_ops resetctrl_ops = { + .core = &resetctrl_core_ops, +}; + +/* + * External entry points + */ +void cx18_gpio_init(struct cx18 *cx) +{ + mutex_lock(&cx->gpio_lock); + cx->gpio_dir = cx->card->gpio_init.direction; + cx->gpio_val = cx->card->gpio_init.initial_value; + + if (cx->card->tuners[0].tuner == TUNER_XC2028) { + cx->gpio_dir |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; + } + + if (cx->gpio_dir == 0) { + mutex_unlock(&cx->gpio_lock); + return; + } + + CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", + cx18_read_reg(cx, CX18_REG_GPIO_DIR1), + cx18_read_reg(cx, CX18_REG_GPIO_DIR2), + cx18_read_reg(cx, CX18_REG_GPIO_OUT1), + cx18_read_reg(cx, CX18_REG_GPIO_OUT2)); + + gpio_write(cx); + mutex_unlock(&cx->gpio_lock); +} + +int cx18_gpio_register(struct cx18 *cx, u32 hw) +{ + struct v4l2_subdev *sd; + const struct v4l2_subdev_ops *ops; + char *str; + + switch (hw) { + case CX18_HW_GPIO_MUX: + sd = &cx->sd_gpiomux; + ops = &gpiomux_ops; + str = "gpio-mux"; + break; + case CX18_HW_GPIO_RESET_CTRL: + sd = &cx->sd_resetctrl; + ops = &resetctrl_ops; + str = "gpio-reset-ctrl"; + break; + default: + return -EINVAL; + } + + v4l2_subdev_init(sd, ops); + v4l2_set_subdevdata(sd, cx); + snprintf(sd->name, sizeof(sd->name), "%s %s", cx->v4l2_dev.name, str); + sd->grp_id = hw; + return v4l2_device_register_subdev(&cx->v4l2_dev, sd); +} + +void cx18_reset_ir_gpio(void *data) +{ + struct cx18 *cx = to_cx18((struct v4l2_device *)data); + + if (cx->card->gpio_i2c_slave_reset.ir_reset_mask == 0) + return; + + CX18_DEBUG_INFO("Resetting IR microcontroller\n"); + + v4l2_subdev_call(&cx->sd_resetctrl, + core, reset, CX18_GPIO_RESET_Z8F0811); +} +EXPORT_SYMBOL(cx18_reset_ir_gpio); +/* This symbol is exported for use by lirc_pvr150 for the IR-blaster */ + +/* Xceive tuner reset function */ +int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value) +{ + struct i2c_algo_bit_data *algo = dev; + struct cx18_i2c_algo_callback_data *cb_data = algo->data; + struct cx18 *cx = cb_data->cx; + + if (cmd != XC2028_TUNER_RESET || + cx->card->tuners[0].tuner != TUNER_XC2028) + return 0; + + CX18_DEBUG_INFO("Resetting XCeive tuner\n"); + return v4l2_subdev_call(&cx->sd_resetctrl, + core, reset, CX18_GPIO_RESET_XC2028); +} diff --git a/drivers/media/pci/cx18/cx18-gpio.h b/drivers/media/pci/cx18/cx18-gpio.h new file mode 100644 index 00000000..4aea2ef8 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-gpio.h @@ -0,0 +1,34 @@ +/* + * cx18 gpio functions + * + * Derived from ivtv-gpio.h + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +void cx18_gpio_init(struct cx18 *cx); +int cx18_gpio_register(struct cx18 *cx, u32 hw); + +enum cx18_gpio_reset_type { + CX18_GPIO_RESET_I2C = 0, + CX18_GPIO_RESET_Z8F0811 = 1, + CX18_GPIO_RESET_XC2028 = 2, +}; + +void cx18_reset_ir_gpio(void *data); +int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value); diff --git a/drivers/media/pci/cx18/cx18-i2c.c b/drivers/media/pci/cx18/cx18-i2c.c new file mode 100644 index 00000000..4af8cd6d --- /dev/null +++ b/drivers/media/pci/cx18/cx18-i2c.c @@ -0,0 +1,325 @@ +/* + * cx18 I2C functions + * + * Derived from ivtv-i2c.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-cards.h" +#include "cx18-gpio.h" +#include "cx18-i2c.h" +#include "cx18-irq.h" + +#define CX18_REG_I2C_1_WR 0xf15000 +#define CX18_REG_I2C_1_RD 0xf15008 +#define CX18_REG_I2C_2_WR 0xf25100 +#define CX18_REG_I2C_2_RD 0xf25108 + +#define SETSCL_BIT 0x0001 +#define SETSDL_BIT 0x0002 +#define GETSCL_BIT 0x0004 +#define GETSDL_BIT 0x0008 + +#define CX18_CS5345_I2C_ADDR 0x4c +#define CX18_Z8F0811_IR_TX_I2C_ADDR 0x70 +#define CX18_Z8F0811_IR_RX_I2C_ADDR 0x71 + +/* This array should match the CX18_HW_ defines */ +static const u8 hw_addrs[] = { + 0, /* CX18_HW_TUNER */ + 0, /* CX18_HW_TVEEPROM */ + CX18_CS5345_I2C_ADDR, /* CX18_HW_CS5345 */ + 0, /* CX18_HW_DVB */ + 0, /* CX18_HW_418_AV */ + 0, /* CX18_HW_GPIO_MUX */ + 0, /* CX18_HW_GPIO_RESET_CTRL */ + CX18_Z8F0811_IR_TX_I2C_ADDR, /* CX18_HW_Z8F0811_IR_TX_HAUP */ + CX18_Z8F0811_IR_RX_I2C_ADDR, /* CX18_HW_Z8F0811_IR_RX_HAUP */ +}; + +/* This array should match the CX18_HW_ defines */ +/* This might well become a card-specific array */ +static const u8 hw_bus[] = { + 1, /* CX18_HW_TUNER */ + 0, /* CX18_HW_TVEEPROM */ + 0, /* CX18_HW_CS5345 */ + 0, /* CX18_HW_DVB */ + 0, /* CX18_HW_418_AV */ + 0, /* CX18_HW_GPIO_MUX */ + 0, /* CX18_HW_GPIO_RESET_CTRL */ + 0, /* CX18_HW_Z8F0811_IR_TX_HAUP */ + 0, /* CX18_HW_Z8F0811_IR_RX_HAUP */ +}; + +/* This array should match the CX18_HW_ defines */ +static const char * const hw_devicenames[] = { + "tuner", + "tveeprom", + "cs5345", + "cx23418_DTV", + "cx23418_AV", + "gpio_mux", + "gpio_reset_ctrl", + "ir_tx_z8f0811_haup", + "ir_rx_z8f0811_haup", +}; + +static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw, + const char *type, u8 addr) +{ + struct i2c_board_info info; + struct IR_i2c_init_data *init_data = &cx->ir_i2c_init_data; + unsigned short addr_list[2] = { addr, I2C_CLIENT_END }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, type, I2C_NAME_SIZE); + + /* Our default information for ir-kbd-i2c.c to use */ + switch (hw) { + case CX18_HW_Z8F0811_IR_RX_HAUP: + init_data->ir_codes = RC_MAP_HAUPPAUGE; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; + init_data->type = RC_BIT_RC5; + init_data->name = cx->card_name; + info.platform_data = init_data; + break; + } + + return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ? + -1 : 0; +} + +int cx18_i2c_register(struct cx18 *cx, unsigned idx) +{ + struct v4l2_subdev *sd; + int bus = hw_bus[idx]; + struct i2c_adapter *adap = &cx->i2c_adap[bus]; + const char *type = hw_devicenames[idx]; + u32 hw = 1 << idx; + + if (hw == CX18_HW_TUNER) { + /* special tuner group handling */ + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, + adap, type, 0, cx->card_i2c->radio); + if (sd != NULL) + sd->grp_id = hw; + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, + adap, type, 0, cx->card_i2c->demod); + if (sd != NULL) + sd->grp_id = hw; + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, + adap, type, 0, cx->card_i2c->tv); + if (sd != NULL) + sd->grp_id = hw; + return sd != NULL ? 0 : -1; + } + + if (hw & CX18_HW_IR_ANY) + return cx18_i2c_new_ir(cx, adap, hw, type, hw_addrs[idx]); + + /* Is it not an I2C device or one we do not wish to register? */ + if (!hw_addrs[idx]) + return -1; + + /* It's an I2C device other than an analog tuner or IR chip */ + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, type, hw_addrs[idx], + NULL); + if (sd != NULL) + sd->grp_id = hw; + return sd != NULL ? 0 : -1; +} + +/* Find the first member of the subdev group id in hw */ +struct v4l2_subdev *cx18_find_hw(struct cx18 *cx, u32 hw) +{ + struct v4l2_subdev *result = NULL; + struct v4l2_subdev *sd; + + spin_lock(&cx->v4l2_dev.lock); + v4l2_device_for_each_subdev(sd, &cx->v4l2_dev) { + if (sd->grp_id == hw) { + result = sd; + break; + } + } + spin_unlock(&cx->v4l2_dev.lock); + return result; +} + +static void cx18_setscl(void *data, int state) +{ + struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; + int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; + u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR; + u32 r = cx18_read_reg(cx, addr); + + if (state) + cx18_write_reg(cx, r | SETSCL_BIT, addr); + else + cx18_write_reg(cx, r & ~SETSCL_BIT, addr); +} + +static void cx18_setsda(void *data, int state) +{ + struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; + int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; + u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR; + u32 r = cx18_read_reg(cx, addr); + + if (state) + cx18_write_reg(cx, r | SETSDL_BIT, addr); + else + cx18_write_reg(cx, r & ~SETSDL_BIT, addr); +} + +static int cx18_getscl(void *data) +{ + struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; + int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; + u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD; + + return cx18_read_reg(cx, addr) & GETSCL_BIT; +} + +static int cx18_getsda(void *data) +{ + struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; + int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; + u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD; + + return cx18_read_reg(cx, addr) & GETSDL_BIT; +} + +/* template for i2c-bit-algo */ +static struct i2c_adapter cx18_i2c_adap_template = { + .name = "cx18 i2c driver", + .algo = NULL, /* set by i2c-algo-bit */ + .algo_data = NULL, /* filled from template */ + .owner = THIS_MODULE, +}; + +#define CX18_SCL_PERIOD (10) /* usecs. 10 usec is period for a 100 KHz clock */ +#define CX18_ALGO_BIT_TIMEOUT (2) /* seconds */ + +static struct i2c_algo_bit_data cx18_i2c_algo_template = { + .setsda = cx18_setsda, + .setscl = cx18_setscl, + .getsda = cx18_getsda, + .getscl = cx18_getscl, + .udelay = CX18_SCL_PERIOD/2, /* 1/2 clock period in usec*/ + .timeout = CX18_ALGO_BIT_TIMEOUT*HZ /* jiffies */ +}; + +/* init + register i2c adapter */ +int init_cx18_i2c(struct cx18 *cx) +{ + int i, err; + CX18_DEBUG_I2C("i2c init\n"); + + for (i = 0; i < 2; i++) { + /* Setup algorithm for adapter */ + cx->i2c_algo[i] = cx18_i2c_algo_template; + cx->i2c_algo_cb_data[i].cx = cx; + cx->i2c_algo_cb_data[i].bus_index = i; + cx->i2c_algo[i].data = &cx->i2c_algo_cb_data[i]; + + /* Setup adapter */ + cx->i2c_adap[i] = cx18_i2c_adap_template; + cx->i2c_adap[i].algo_data = &cx->i2c_algo[i]; + sprintf(cx->i2c_adap[i].name + strlen(cx->i2c_adap[i].name), + " #%d-%d", cx->instance, i); + i2c_set_adapdata(&cx->i2c_adap[i], &cx->v4l2_dev); + cx->i2c_adap[i].dev.parent = &cx->pci_dev->dev; + } + + if (cx18_read_reg(cx, CX18_REG_I2C_2_WR) != 0x0003c02f) { + /* Reset/Unreset I2C hardware block */ + /* Clock select 220MHz */ + cx18_write_reg_expect(cx, 0x10000000, 0xc71004, + 0x00000000, 0x10001000); + /* Clock Enable */ + cx18_write_reg_expect(cx, 0x10001000, 0xc71024, + 0x00001000, 0x10001000); + } + /* courtesy of Steven Toth */ + cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0); + mdelay(10); + cx18_write_reg_expect(cx, 0x00c000c0, 0xc7001c, 0x000000c0, 0x00c000c0); + mdelay(10); + cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0); + mdelay(10); + + /* Set to edge-triggered intrs. */ + cx18_write_reg(cx, 0x00c00000, 0xc730c8); + /* Clear any stale intrs */ + cx18_write_reg_expect(cx, HW2_I2C1_INT|HW2_I2C2_INT, HW2_INT_CLR_STATUS, + ~(HW2_I2C1_INT|HW2_I2C2_INT), HW2_I2C1_INT|HW2_I2C2_INT); + + /* Hw I2C1 Clock Freq ~100kHz */ + cx18_write_reg(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR); + cx18_setscl(&cx->i2c_algo_cb_data[0], 1); + cx18_setsda(&cx->i2c_algo_cb_data[0], 1); + + /* Hw I2C2 Clock Freq ~100kHz */ + cx18_write_reg(cx, 0x00021c0f & ~4, CX18_REG_I2C_2_WR); + cx18_setscl(&cx->i2c_algo_cb_data[1], 1); + cx18_setsda(&cx->i2c_algo_cb_data[1], 1); + + cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL, + core, reset, (u32) CX18_GPIO_RESET_I2C); + + err = i2c_bit_add_bus(&cx->i2c_adap[0]); + if (err) + goto err; + err = i2c_bit_add_bus(&cx->i2c_adap[1]); + if (err) + goto err_del_bus_0; + return 0; + + err_del_bus_0: + i2c_del_adapter(&cx->i2c_adap[0]); + err: + return err; +} + +void exit_cx18_i2c(struct cx18 *cx) +{ + int i; + CX18_DEBUG_I2C("i2c exit\n"); + cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_1_WR) | 4, + CX18_REG_I2C_1_WR); + cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_2_WR) | 4, + CX18_REG_I2C_2_WR); + + for (i = 0; i < 2; i++) { + i2c_del_adapter(&cx->i2c_adap[i]); + } +} + +/* + Hauppauge HVR1600 should have: + 32 cx24227 + 98 unknown + a0 eeprom + c2 tuner + e? zilog ir + */ diff --git a/drivers/media/pci/cx18/cx18-i2c.h b/drivers/media/pci/cx18/cx18-i2c.h new file mode 100644 index 00000000..1180fdc8 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-i2c.h @@ -0,0 +1,29 @@ +/* + * cx18 I2C functions + * + * Derived from ivtv-i2c.h + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int cx18_i2c_register(struct cx18 *cx, unsigned idx); +struct v4l2_subdev *cx18_find_hw(struct cx18 *cx, u32 hw); + +/* init + register i2c adapter */ +int init_cx18_i2c(struct cx18 *cx); +void exit_cx18_i2c(struct cx18 *cx); diff --git a/drivers/media/pci/cx18/cx18-io.c b/drivers/media/pci/cx18/cx18-io.c new file mode 100644 index 00000000..49b9dbd0 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-io.c @@ -0,0 +1,97 @@ +/* + * cx18 driver PCI memory mapped IO access routines + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-irq.h" + +void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) +{ + u8 __iomem *dst = addr; + u16 val2 = val | (val << 8); + u32 val4 = val2 | (val2 << 16); + + /* Align writes on the CX23418's addresses */ + if ((count > 0) && ((unsigned long)dst & 1)) { + cx18_writeb(cx, (u8) val, dst); + count--; + dst++; + } + if ((count > 1) && ((unsigned long)dst & 2)) { + cx18_writew(cx, val2, dst); + count -= 2; + dst += 2; + } + while (count > 3) { + cx18_writel(cx, val4, dst); + count -= 4; + dst += 4; + } + if (count > 1) { + cx18_writew(cx, val2, dst); + count -= 2; + dst += 2; + } + if (count > 0) + cx18_writeb(cx, (u8) val, dst); +} + +void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) +{ + cx18_write_reg_expect(cx, val, SW1_INT_STATUS, ~val, val); + cx->sw1_irq_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | val; + cx18_write_reg(cx, cx->sw1_irq_mask, SW1_INT_ENABLE_PCI); +} + +void cx18_sw1_irq_disable(struct cx18 *cx, u32 val) +{ + cx->sw1_irq_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) & ~val; + cx18_write_reg(cx, cx->sw1_irq_mask, SW1_INT_ENABLE_PCI); +} + +void cx18_sw2_irq_enable(struct cx18 *cx, u32 val) +{ + cx18_write_reg_expect(cx, val, SW2_INT_STATUS, ~val, val); + cx->sw2_irq_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | val; + cx18_write_reg(cx, cx->sw2_irq_mask, SW2_INT_ENABLE_PCI); +} + +void cx18_sw2_irq_disable(struct cx18 *cx, u32 val) +{ + cx->sw2_irq_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) & ~val; + cx18_write_reg(cx, cx->sw2_irq_mask, SW2_INT_ENABLE_PCI); +} + +void cx18_sw2_irq_disable_cpu(struct cx18 *cx, u32 val) +{ + u32 r; + r = cx18_read_reg(cx, SW2_INT_ENABLE_CPU); + cx18_write_reg(cx, r & ~val, SW2_INT_ENABLE_CPU); +} + +void cx18_setup_page(struct cx18 *cx, u32 addr) +{ + u32 val; + val = cx18_read_reg(cx, 0xD000F8); + val = (val & ~0x1f00) | ((addr >> 17) & 0x1f00); + cx18_write_reg(cx, val, 0xD000F8); +} diff --git a/drivers/media/pci/cx18/cx18-io.h b/drivers/media/pci/cx18/cx18-io.h new file mode 100644 index 00000000..18974d88 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-io.h @@ -0,0 +1,191 @@ +/* + * cx18 driver PCI memory mapped IO access routines + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_IO_H +#define CX18_IO_H + +#include "cx18-driver.h" + +/* + * Readback and retry of MMIO access for reliability: + * The concept was suggested by Steve Toth . + * The implmentation is the fault of Andy Walls . + * + * *write* functions are implied to retry the mmio unless suffixed with _noretry + * *read* functions never retry the mmio (it never helps to do so) + */ + +/* Non byteswapping memory mapped IO */ +static inline u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr) +{ + return __raw_readl(addr); +} + +static inline +void cx18_raw_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + __raw_writel(val, addr); +} + +static inline void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) { + cx18_raw_writel_noretry(cx, val, addr); + if (val == cx18_raw_readl(cx, addr)) + break; + } +} + +/* Normal memory mapped IO */ +static inline u32 cx18_readl(struct cx18 *cx, const void __iomem *addr) +{ + return readl(addr); +} + +static inline +void cx18_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + writel(val, addr); +} + +static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) { + cx18_writel_noretry(cx, val, addr); + if (val == cx18_readl(cx, addr)) + break; + } +} + +static inline +void cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr, + u32 eval, u32 mask) +{ + int i; + u32 r; + eval &= mask; + for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) { + cx18_writel_noretry(cx, val, addr); + r = cx18_readl(cx, addr); + if (r == 0xffffffff && eval != 0xffffffff) + continue; + if (eval == (r & mask)) + break; + } +} + +static inline u16 cx18_readw(struct cx18 *cx, const void __iomem *addr) +{ + return readw(addr); +} + +static inline +void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr) +{ + writew(val, addr); +} + +static inline void cx18_writew(struct cx18 *cx, u16 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) { + cx18_writew_noretry(cx, val, addr); + if (val == cx18_readw(cx, addr)) + break; + } +} + +static inline u8 cx18_readb(struct cx18 *cx, const void __iomem *addr) +{ + return readb(addr); +} + +static inline +void cx18_writeb_noretry(struct cx18 *cx, u8 val, void __iomem *addr) +{ + writeb(val, addr); +} + +static inline void cx18_writeb(struct cx18 *cx, u8 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) { + cx18_writeb_noretry(cx, val, addr); + if (val == cx18_readb(cx, addr)) + break; + } +} + +static inline +void cx18_memcpy_fromio(struct cx18 *cx, void *to, + const void __iomem *from, unsigned int len) +{ + memcpy_fromio(to, from, len); +} + +void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count); + + +/* Access "register" region of CX23418 memory mapped I/O */ +static inline void cx18_write_reg_noretry(struct cx18 *cx, u32 val, u32 reg) +{ + cx18_writel_noretry(cx, val, cx->reg_mem + reg); +} + +static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) +{ + cx18_writel(cx, val, cx->reg_mem + reg); +} + +static inline void cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg, + u32 eval, u32 mask) +{ + cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask); +} + +static inline u32 cx18_read_reg(struct cx18 *cx, u32 reg) +{ + return cx18_readl(cx, cx->reg_mem + reg); +} + + +/* Access "encoder memory" region of CX23418 memory mapped I/O */ +static inline void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr) +{ + cx18_writel(cx, val, cx->enc_mem + addr); +} + +static inline u32 cx18_read_enc(struct cx18 *cx, u32 addr) +{ + return cx18_readl(cx, cx->enc_mem + addr); +} + +void cx18_sw1_irq_enable(struct cx18 *cx, u32 val); +void cx18_sw1_irq_disable(struct cx18 *cx, u32 val); +void cx18_sw2_irq_enable(struct cx18 *cx, u32 val); +void cx18_sw2_irq_disable(struct cx18 *cx, u32 val); +void cx18_sw2_irq_disable_cpu(struct cx18 *cx, u32 val); +void cx18_setup_page(struct cx18 *cx, u32 addr); + +#endif /* CX18_IO_H */ diff --git a/drivers/media/pci/cx18/cx18-ioctl.c b/drivers/media/pci/cx18/cx18-ioctl.c new file mode 100644 index 00000000..aee7b6da --- /dev/null +++ b/drivers/media/pci/cx18/cx18-ioctl.c @@ -0,0 +1,1182 @@ +/* + * cx18 ioctl system call + * + * Derived from ivtv-ioctl.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-version.h" +#include "cx18-mailbox.h" +#include "cx18-i2c.h" +#include "cx18-queue.h" +#include "cx18-fileops.h" +#include "cx18-vbi.h" +#include "cx18-audio.h" +#include "cx18-video.h" +#include "cx18-streams.h" +#include "cx18-ioctl.h" +#include "cx18-gpio.h" +#include "cx18-controls.h" +#include "cx18-cards.h" +#include "cx18-av-core.h" +#include +#include + +u16 cx18_service2vbi(int type) +{ + switch (type) { + case V4L2_SLICED_TELETEXT_B: + return CX18_SLICED_TYPE_TELETEXT_B; + case V4L2_SLICED_CAPTION_525: + return CX18_SLICED_TYPE_CAPTION_525; + case V4L2_SLICED_WSS_625: + return CX18_SLICED_TYPE_WSS_625; + case V4L2_SLICED_VPS: + return CX18_SLICED_TYPE_VPS; + default: + return 0; + } +} + +/* Check if VBI services are allowed on the (field, line) for the video std */ +static int valid_service_line(int field, int line, int is_pal) +{ + return (is_pal && line >= 6 && + ((field == 0 && line <= 23) || (field == 1 && line <= 22))) || + (!is_pal && line >= 10 && line < 22); +} + +/* + * For a (field, line, std) and inbound potential set of services for that line, + * return the first valid service of those passed in the incoming set for that + * line in priority order: + * CC, VPS, or WSS over TELETEXT for well known lines + * TELETEXT, before VPS, before CC, before WSS, for other lines + */ +static u16 select_service_from_set(int field, int line, u16 set, int is_pal) +{ + u16 valid_set = (is_pal ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525); + int i; + + set = set & valid_set; + if (set == 0 || !valid_service_line(field, line, is_pal)) + return 0; + if (!is_pal) { + if (line == 21 && (set & V4L2_SLICED_CAPTION_525)) + return V4L2_SLICED_CAPTION_525; + } else { + if (line == 16 && field == 0 && (set & V4L2_SLICED_VPS)) + return V4L2_SLICED_VPS; + if (line == 23 && field == 0 && (set & V4L2_SLICED_WSS_625)) + return V4L2_SLICED_WSS_625; + if (line == 23) + return 0; + } + for (i = 0; i < 32; i++) { + if ((1 << i) & set) + return 1 << i; + } + return 0; +} + +/* + * Expand the service_set of *fmt into valid service_lines for the std, + * and clear the passed in fmt->service_set + */ +void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +{ + u16 set = fmt->service_set; + int f, l; + + fmt->service_set = 0; + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) + fmt->service_lines[f][l] = select_service_from_set(f, l, set, is_pal); + } +} + +/* + * Sanitize the service_lines in *fmt per the video std, and return 1 + * if any service_line is left as valid after santization + */ +static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +{ + int f, l; + u16 set = 0; + + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + fmt->service_lines[f][l] = select_service_from_set(f, l, fmt->service_lines[f][l], is_pal); + set |= fmt->service_lines[f][l]; + } + } + return set != 0; +} + +/* Compute the service_set from the assumed valid service_lines of *fmt */ +u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt) +{ + int f, l; + u16 set = 0; + + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) + set |= fmt->service_lines[f][l]; + } + return set; +} + +static int cx18_g_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + pixfmt->width = cx->cxhdl.width; + pixfmt->height = cx->cxhdl.height; + pixfmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + pixfmt->field = V4L2_FIELD_INTERLACED; + pixfmt->priv = 0; + if (id->type == CX18_ENC_STREAM_TYPE_YUV) { + pixfmt->pixelformat = s->pixelformat; + pixfmt->sizeimage = s->vb_bytes_per_frame; + pixfmt->bytesperline = 720; + } else { + pixfmt->pixelformat = V4L2_PIX_FMT_MPEG; + pixfmt->sizeimage = 128 * 1024; + pixfmt->bytesperline = 0; + } + return 0; +} + +static int cx18_g_fmt_vbi_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + struct cx18 *cx = fh2id(fh)->cx; + struct v4l2_vbi_format *vbifmt = &fmt->fmt.vbi; + + vbifmt->sampling_rate = 27000000; + vbifmt->offset = 248; /* FIXME - slightly wrong for both 50 & 60 Hz */ + vbifmt->samples_per_line = vbi_active_samples - 4; + vbifmt->sample_format = V4L2_PIX_FMT_GREY; + vbifmt->start[0] = cx->vbi.start[0]; + vbifmt->start[1] = cx->vbi.start[1]; + vbifmt->count[0] = vbifmt->count[1] = cx->vbi.count; + vbifmt->flags = 0; + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + return 0; +} + +static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + struct cx18 *cx = fh2id(fh)->cx; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + /* sane, V4L2 spec compliant, defaults */ + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + memset(vbifmt->service_lines, 0, sizeof(vbifmt->service_lines)); + vbifmt->service_set = 0; + + /* + * Fetch the configured service_lines and total service_set from the + * digitizer/slicer. Note, cx18_av_vbi() wipes the passed in + * fmt->fmt.sliced under valid calling conditions + */ + if (v4l2_subdev_call(cx->sd_av, vbi, g_sliced_fmt, &fmt->fmt.sliced)) + return -EINVAL; + + vbifmt->service_set = cx18_get_service_set(vbifmt); + return 0; +} + +static int cx18_try_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + int w = fmt->fmt.pix.width; + int h = fmt->fmt.pix.height; + int min_h = 2; + + w = min(w, 720); + w = max(w, 2); + if (id->type == CX18_ENC_STREAM_TYPE_YUV) { + /* YUV height must be a multiple of 32 */ + h &= ~0x1f; + min_h = 32; + } + h = min(h, cx->is_50hz ? 576 : 480); + h = max(h, min_h); + + fmt->fmt.pix.width = w; + fmt->fmt.pix.height = h; + return 0; +} + +static int cx18_try_fmt_vbi_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + return cx18_g_fmt_vbi_cap(file, fh, fmt); +} + +static int cx18_try_fmt_sliced_vbi_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + struct cx18 *cx = fh2id(fh)->cx; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + + /* If given a service set, expand it validly & clear passed in set */ + if (vbifmt->service_set) + cx18_expand_service_set(vbifmt, cx->is_50hz); + /* Sanitize the service_lines, and compute the new set if any valid */ + if (check_service_set(vbifmt, cx->is_50hz)) + vbifmt->service_set = cx18_get_service_set(vbifmt); + return 0; +} + +static int cx18_s_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + struct v4l2_mbus_framefmt mbus_fmt; + struct cx18_stream *s = &cx->streams[id->type]; + int ret; + int w, h; + + ret = cx18_try_fmt_vid_cap(file, fh, fmt); + if (ret) + return ret; + w = fmt->fmt.pix.width; + h = fmt->fmt.pix.height; + + if (cx->cxhdl.width == w && cx->cxhdl.height == h && + s->pixelformat == fmt->fmt.pix.pixelformat) + return 0; + + if (atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + + s->pixelformat = fmt->fmt.pix.pixelformat; + /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2))) + UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */ + if (s->pixelformat == V4L2_PIX_FMT_HM12) + s->vb_bytes_per_frame = h * 720 * 3 / 2; + else + s->vb_bytes_per_frame = h * 720 * 2; + + mbus_fmt.width = cx->cxhdl.width = w; + mbus_fmt.height = cx->cxhdl.height = h; + mbus_fmt.code = V4L2_MBUS_FMT_FIXED; + v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &mbus_fmt); + return cx18_g_fmt_vid_cap(file, fh, fmt); +} + +static int cx18_s_fmt_vbi_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + int ret; + + /* + * Changing the Encoder's Raw VBI parameters won't have any effect + * if any analog capture is ongoing + */ + if (!cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + + /* + * Set the digitizer registers for raw active VBI. + * Note cx18_av_vbi_wipes out a lot of the passed in fmt under valid + * calling conditions + */ + ret = v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &fmt->fmt.vbi); + if (ret) + return ret; + + /* Store our new v4l2 (non-)sliced VBI state */ + cx->vbi.sliced_in->service_set = 0; + cx->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; + + return cx18_g_fmt_vbi_cap(file, fh, fmt); +} + +static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh, + struct v4l2_format *fmt) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + int ret; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + cx18_try_fmt_sliced_vbi_cap(file, fh, fmt); + + /* + * Changing the Encoder's Raw VBI parameters won't have any effect + * if any analog capture is ongoing + */ + if (cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + + /* + * Set the service_lines requested in the digitizer/slicer registers. + * Note, cx18_av_vbi() wipes some "impossible" service lines in the + * passed in fmt->fmt.sliced under valid calling conditions + */ + ret = v4l2_subdev_call(cx->sd_av, vbi, s_sliced_fmt, &fmt->fmt.sliced); + if (ret) + return ret; + /* Store our current v4l2 sliced VBI settings */ + cx->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in)); + return 0; +} + +static int cx18_g_chip_ident(struct file *file, void *fh, + struct v4l2_dbg_chip_ident *chip) +{ + struct cx18 *cx = fh2id(fh)->cx; + int err = 0; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + switch (chip->match.type) { + case V4L2_CHIP_MATCH_HOST: + switch (chip->match.addr) { + case 0: + chip->ident = V4L2_IDENT_CX23418; + chip->revision = cx18_read_reg(cx, 0xC72028); + break; + case 1: + /* + * The A/V decoder is always present, but in the rare + * case that the card doesn't have analog, we don't + * use it. We find it w/o using the cx->sd_av pointer + */ + cx18_call_hw(cx, CX18_HW_418_AV, + core, g_chip_ident, chip); + break; + default: + /* + * Could return ident = V4L2_IDENT_UNKNOWN if we had + * other host chips at higher addresses, but we don't + */ + err = -EINVAL; /* per V4L2 spec */ + break; + } + break; + case V4L2_CHIP_MATCH_I2C_DRIVER: + /* If needed, returns V4L2_IDENT_AMBIGUOUS without extra work */ + cx18_call_all(cx, core, g_chip_ident, chip); + break; + case V4L2_CHIP_MATCH_I2C_ADDR: + /* + * We could return V4L2_IDENT_UNKNOWN, but we don't do the work + * to look if a chip is at the address with no driver. That's a + * dangerous thing to do with EEPROMs anyway. + */ + cx18_call_all(cx, core, g_chip_ident, chip); + break; + default: + err = -EINVAL; + break; + } + return err; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cx18_g_register(struct file *file, void *fh, + struct v4l2_dbg_register *reg) +{ + struct cx18 *cx = fh2id(fh)->cx; + + if (v4l2_chip_match_host(®->match)) { + if (reg->reg >= CX18_MEM_OFFSET + CX18_MEM_SIZE) + return -EINVAL; + reg->size = 4; + reg->val = cx18_read_enc(cx, reg->reg); + return 0; + } + /* FIXME - errors shouldn't be ignored */ + cx18_call_all(cx, core, g_register, reg); + return 0; +} + +static int cx18_s_register(struct file *file, void *fh, + const struct v4l2_dbg_register *reg) +{ + struct cx18 *cx = fh2id(fh)->cx; + + if (v4l2_chip_match_host(®->match)) { + if (reg->reg >= CX18_MEM_OFFSET + CX18_MEM_SIZE) + return -EINVAL; + cx18_write_enc(cx, reg->val, reg->reg); + return 0; + } + /* FIXME - errors shouldn't be ignored */ + cx18_call_all(cx, core, s_register, reg); + return 0; +} +#endif + +static int cx18_querycap(struct file *file, void *fh, + struct v4l2_capability *vcap) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + + strlcpy(vcap->driver, CX18_DRIVER_NAME, sizeof(vcap->driver)); + strlcpy(vcap->card, cx->card_name, sizeof(vcap->card)); + snprintf(vcap->bus_info, sizeof(vcap->bus_info), + "PCI:%s", pci_name(cx->pci_dev)); + vcap->capabilities = cx->v4l2_cap; /* capabilities */ + if (id->type == CX18_ENC_STREAM_TYPE_YUV) + vcap->capabilities |= V4L2_CAP_STREAMING; + return 0; +} + +static int cx18_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin) +{ + struct cx18 *cx = fh2id(fh)->cx; + + return cx18_get_audio_input(cx, vin->index, vin); +} + +static int cx18_g_audio(struct file *file, void *fh, struct v4l2_audio *vin) +{ + struct cx18 *cx = fh2id(fh)->cx; + + vin->index = cx->audio_input; + return cx18_get_audio_input(cx, vin->index, vin); +} + +static int cx18_s_audio(struct file *file, void *fh, const struct v4l2_audio *vout) +{ + struct cx18 *cx = fh2id(fh)->cx; + + if (vout->index >= cx->nof_audio_inputs) + return -EINVAL; + cx->audio_input = vout->index; + cx18_audio_set_io(cx); + return 0; +} + +static int cx18_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + struct cx18 *cx = fh2id(fh)->cx; + + /* set it to defaults from our table */ + return cx18_get_input(cx, vin->index, vin); +} + +static int cx18_cropcap(struct file *file, void *fh, + struct v4l2_cropcap *cropcap) +{ + struct cx18 *cx = fh2id(fh)->cx; + + if (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + cropcap->bounds.top = cropcap->bounds.left = 0; + cropcap->bounds.width = 720; + cropcap->bounds.height = cx->is_50hz ? 576 : 480; + cropcap->pixelaspect.numerator = cx->is_50hz ? 59 : 10; + cropcap->pixelaspect.denominator = cx->is_50hz ? 54 : 11; + cropcap->defrect = cropcap->bounds; + return 0; +} + +static int cx18_s_crop(struct file *file, void *fh, const struct v4l2_crop *crop) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + CX18_DEBUG_WARN("VIDIOC_S_CROP not implemented\n"); + return -EINVAL; +} + +static int cx18_g_crop(struct file *file, void *fh, struct v4l2_crop *crop) +{ + struct cx18 *cx = fh2id(fh)->cx; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + CX18_DEBUG_WARN("VIDIOC_G_CROP not implemented\n"); + return -EINVAL; +} + +static int cx18_enum_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_fmtdesc *fmt) +{ + static const struct v4l2_fmtdesc formats[] = { + { 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, 0, + "HM12 (YUV 4:1:1)", V4L2_PIX_FMT_HM12, { 0, 0, 0, 0 } + }, + { 1, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FMT_FLAG_COMPRESSED, + "MPEG", V4L2_PIX_FMT_MPEG, { 0, 0, 0, 0 } + }, + { 2, V4L2_BUF_TYPE_VIDEO_CAPTURE, 0, + "UYVY 4:2:2", V4L2_PIX_FMT_UYVY, { 0, 0, 0, 0 } + }, + }; + + if (fmt->index > ARRAY_SIZE(formats) - 1) + return -EINVAL; + *fmt = formats[fmt->index]; + return 0; +} + +static int cx18_g_input(struct file *file, void *fh, unsigned int *i) +{ + struct cx18 *cx = fh2id(fh)->cx; + + *i = cx->active_input; + return 0; +} + +int cx18_s_input(struct file *file, void *fh, unsigned int inp) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + + if (inp >= cx->nof_inputs) + return -EINVAL; + + if (inp == cx->active_input) { + CX18_DEBUG_INFO("Input unchanged\n"); + return 0; + } + + CX18_DEBUG_INFO("Changing input from %d to %d\n", + cx->active_input, inp); + + cx->active_input = inp; + /* Set the audio input to whatever is appropriate for the input type. */ + cx->audio_input = cx->card->video_inputs[inp].audio_index; + + /* prevent others from messing with the streams until + we're finished changing inputs. */ + cx18_mute(cx); + cx18_video_set_io(cx); + cx18_audio_set_io(cx); + cx18_unmute(cx); + return 0; +} + +static int cx18_g_frequency(struct file *file, void *fh, + struct v4l2_frequency *vf) +{ + struct cx18 *cx = fh2id(fh)->cx; + + if (vf->tuner != 0) + return -EINVAL; + + cx18_call_all(cx, tuner, g_frequency, vf); + return 0; +} + +int cx18_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + + if (vf->tuner != 0) + return -EINVAL; + + cx18_mute(cx); + CX18_DEBUG_INFO("v4l2 ioctl: set frequency %d\n", vf->frequency); + cx18_call_all(cx, tuner, s_frequency, vf); + cx18_unmute(cx); + return 0; +} + +static int cx18_g_std(struct file *file, void *fh, v4l2_std_id *std) +{ + struct cx18 *cx = fh2id(fh)->cx; + + *std = cx->std; + return 0; +} + +int cx18_s_std(struct file *file, void *fh, v4l2_std_id std) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + + if ((std & V4L2_STD_ALL) == 0) + return -EINVAL; + + if (std == cx->std) + return 0; + + if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) || + atomic_read(&cx->ana_capturing) > 0) { + /* Switching standard would turn off the radio or mess + with already running streams, prevent that by + returning EBUSY. */ + return -EBUSY; + } + + cx->std = std; + cx->is_60hz = (std & V4L2_STD_525_60) ? 1 : 0; + cx->is_50hz = !cx->is_60hz; + cx2341x_handler_set_50hz(&cx->cxhdl, cx->is_50hz); + cx->cxhdl.width = 720; + cx->cxhdl.height = cx->is_50hz ? 576 : 480; + cx->vbi.count = cx->is_50hz ? 18 : 12; + cx->vbi.start[0] = cx->is_50hz ? 6 : 10; + cx->vbi.start[1] = cx->is_50hz ? 318 : 273; + CX18_DEBUG_INFO("Switching standard to %llx.\n", + (unsigned long long) cx->std); + + /* Tuner */ + cx18_call_all(cx, core, s_std, cx->std); + return 0; +} + +static int cx18_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + + if (vt->index != 0) + return -EINVAL; + + cx18_call_all(cx, tuner, s_tuner, vt); + return 0; +} + +static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) +{ + struct cx18 *cx = fh2id(fh)->cx; + + if (vt->index != 0) + return -EINVAL; + + cx18_call_all(cx, tuner, g_tuner, vt); + + if (vt->type == V4L2_TUNER_RADIO) + strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name)); + else + strlcpy(vt->name, "cx18 TV Tuner", sizeof(vt->name)); + return 0; +} + +static int cx18_g_sliced_vbi_cap(struct file *file, void *fh, + struct v4l2_sliced_vbi_cap *cap) +{ + struct cx18 *cx = fh2id(fh)->cx; + int set = cx->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; + int f, l; + + if (cap->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + + cap->service_set = 0; + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + if (valid_service_line(f, l, cx->is_50hz)) { + /* + * We can find all v4l2 supported vbi services + * for the standard, on a valid line for the std + */ + cap->service_lines[f][l] = set; + cap->service_set |= set; + } else + cap->service_lines[f][l] = 0; + } + } + for (f = 0; f < 3; f++) + cap->reserved[f] = 0; + return 0; +} + +static int _cx18_process_idx_data(struct cx18_buffer *buf, + struct v4l2_enc_idx *idx) +{ + int consumed, remaining; + struct v4l2_enc_idx_entry *e_idx; + struct cx18_enc_idx_entry *e_buf; + + /* Frame type lookup: 1=I, 2=P, 4=B */ + const int mapping[8] = { + -1, V4L2_ENC_IDX_FRAME_I, V4L2_ENC_IDX_FRAME_P, + -1, V4L2_ENC_IDX_FRAME_B, -1, -1, -1 + }; + + /* + * Assumption here is that a buf holds an integral number of + * struct cx18_enc_idx_entry objects and is properly aligned. + * This is enforced by the module options on IDX buffer sizes. + */ + remaining = buf->bytesused - buf->readpos; + consumed = 0; + e_idx = &idx->entry[idx->entries]; + e_buf = (struct cx18_enc_idx_entry *) &buf->buf[buf->readpos]; + + while (remaining >= sizeof(struct cx18_enc_idx_entry) && + idx->entries < V4L2_ENC_IDX_ENTRIES) { + + e_idx->offset = (((u64) le32_to_cpu(e_buf->offset_high)) << 32) + | le32_to_cpu(e_buf->offset_low); + + e_idx->pts = (((u64) (le32_to_cpu(e_buf->pts_high) & 1)) << 32) + | le32_to_cpu(e_buf->pts_low); + + e_idx->length = le32_to_cpu(e_buf->length); + + e_idx->flags = mapping[le32_to_cpu(e_buf->flags) & 0x7]; + + e_idx->reserved[0] = 0; + e_idx->reserved[1] = 0; + + idx->entries++; + e_idx = &idx->entry[idx->entries]; + e_buf++; + + remaining -= sizeof(struct cx18_enc_idx_entry); + consumed += sizeof(struct cx18_enc_idx_entry); + } + + /* Swallow any partial entries at the end, if there are any */ + if (remaining > 0 && remaining < sizeof(struct cx18_enc_idx_entry)) + consumed += remaining; + + buf->readpos += consumed; + return consumed; +} + +static int cx18_process_idx_data(struct cx18_stream *s, struct cx18_mdl *mdl, + struct v4l2_enc_idx *idx) +{ + if (s->type != CX18_ENC_STREAM_TYPE_IDX) + return -EINVAL; + + if (mdl->curr_buf == NULL) + mdl->curr_buf = list_first_entry(&mdl->buf_list, + struct cx18_buffer, list); + + if (list_entry_is_past_end(mdl->curr_buf, &mdl->buf_list, list)) { + /* + * For some reason we've exhausted the buffers, but the MDL + * object still said some data was unread. + * Fix that and bail out. + */ + mdl->readpos = mdl->bytesused; + return 0; + } + + list_for_each_entry_from(mdl->curr_buf, &mdl->buf_list, list) { + + /* Skip any empty buffers in the MDL */ + if (mdl->curr_buf->readpos >= mdl->curr_buf->bytesused) + continue; + + mdl->readpos += _cx18_process_idx_data(mdl->curr_buf, idx); + + /* exit when MDL drained or request satisfied */ + if (idx->entries >= V4L2_ENC_IDX_ENTRIES || + mdl->curr_buf->readpos < mdl->curr_buf->bytesused || + mdl->readpos >= mdl->bytesused) + break; + } + return 0; +} + +static int cx18_g_enc_index(struct file *file, void *fh, + struct v4l2_enc_idx *idx) +{ + struct cx18 *cx = fh2id(fh)->cx; + struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; + s32 tmp; + struct cx18_mdl *mdl; + + if (!cx18_stream_enabled(s)) /* Module options inhibited IDX stream */ + return -EINVAL; + + /* Compute the best case number of entries we can buffer */ + tmp = s->buffers - + s->bufs_per_mdl * CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN; + if (tmp <= 0) + tmp = 1; + tmp = tmp * s->buf_size / sizeof(struct cx18_enc_idx_entry); + + /* Fill out the header of the return structure */ + idx->entries = 0; + idx->entries_cap = tmp; + memset(idx->reserved, 0, sizeof(idx->reserved)); + + /* Pull IDX MDLs and buffers from q_full and populate the entries */ + do { + mdl = cx18_dequeue(s, &s->q_full); + if (mdl == NULL) /* No more IDX data right now */ + break; + + /* Extract the Index entry data from the MDL and buffers */ + cx18_process_idx_data(s, mdl, idx); + if (mdl->readpos < mdl->bytesused) { + /* We finished with data remaining, push the MDL back */ + cx18_push(s, mdl, &s->q_full); + break; + } + + /* We drained this MDL, schedule it to go to the firmware */ + cx18_enqueue(s, mdl, &s->q_free); + + } while (idx->entries < V4L2_ENC_IDX_ENTRIES); + + /* Tell the work handler to send free IDX MDLs to the firmware */ + cx18_stream_load_fw_queue(s); + return 0; +} + +static struct videobuf_queue *cx18_vb_queue(struct cx18_open_id *id) +{ + struct videobuf_queue *q = NULL; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + switch (s->vb_type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + q = &s->vbuf_q; + break; + case V4L2_BUF_TYPE_VBI_CAPTURE: + break; + default: + break; + } + return q; +} + +static int cx18_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct cx18_open_id *id = file->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + /* Start the hardware only if we're the video device */ + if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + + if (id->type != CX18_ENC_STREAM_TYPE_YUV) + return -EINVAL; + + /* Establish a buffer timeout */ + mod_timer(&s->vb_timeout, msecs_to_jiffies(2000) + jiffies); + + return videobuf_streamon(cx18_vb_queue(id)); +} + +static int cx18_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct cx18_open_id *id = file->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + /* Start the hardware only if we're the video device */ + if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + + if (id->type != CX18_ENC_STREAM_TYPE_YUV) + return -EINVAL; + + return videobuf_streamoff(cx18_vb_queue(id)); +} + +static int cx18_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *rb) +{ + struct cx18_open_id *id = file->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + + return videobuf_reqbufs(cx18_vb_queue(id), rb); +} + +static int cx18_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct cx18_open_id *id = file->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + + return videobuf_querybuf(cx18_vb_queue(id), b); +} + +static int cx18_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct cx18_open_id *id = file->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + + return videobuf_qbuf(cx18_vb_queue(id), b); +} + +static int cx18_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct cx18_open_id *id = file->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + + return videobuf_dqbuf(cx18_vb_queue(id), b, file->f_flags & O_NONBLOCK); +} + +static int cx18_encoder_cmd(struct file *file, void *fh, + struct v4l2_encoder_cmd *enc) +{ + struct cx18_open_id *id = fh2id(fh); + struct cx18 *cx = id->cx; + u32 h; + + switch (enc->cmd) { + case V4L2_ENC_CMD_START: + CX18_DEBUG_IOCTL("V4L2_ENC_CMD_START\n"); + enc->flags = 0; + return cx18_start_capture(id); + + case V4L2_ENC_CMD_STOP: + CX18_DEBUG_IOCTL("V4L2_ENC_CMD_STOP\n"); + enc->flags &= V4L2_ENC_CMD_STOP_AT_GOP_END; + cx18_stop_capture(id, + enc->flags & V4L2_ENC_CMD_STOP_AT_GOP_END); + break; + + case V4L2_ENC_CMD_PAUSE: + CX18_DEBUG_IOCTL("V4L2_ENC_CMD_PAUSE\n"); + enc->flags = 0; + if (!atomic_read(&cx->ana_capturing)) + return -EPERM; + if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) + return 0; + h = cx18_find_handle(cx); + if (h == CX18_INVALID_TASK_HANDLE) { + CX18_ERR("Can't find valid task handle for " + "V4L2_ENC_CMD_PAUSE\n"); + return -EBADFD; + } + cx18_mute(cx); + cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, h); + break; + + case V4L2_ENC_CMD_RESUME: + CX18_DEBUG_IOCTL("V4L2_ENC_CMD_RESUME\n"); + enc->flags = 0; + if (!atomic_read(&cx->ana_capturing)) + return -EPERM; + if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) + return 0; + h = cx18_find_handle(cx); + if (h == CX18_INVALID_TASK_HANDLE) { + CX18_ERR("Can't find valid task handle for " + "V4L2_ENC_CMD_RESUME\n"); + return -EBADFD; + } + cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, h); + cx18_unmute(cx); + break; + + default: + CX18_DEBUG_IOCTL("Unknown cmd %d\n", enc->cmd); + return -EINVAL; + } + return 0; +} + +static int cx18_try_encoder_cmd(struct file *file, void *fh, + struct v4l2_encoder_cmd *enc) +{ + struct cx18 *cx = fh2id(fh)->cx; + + switch (enc->cmd) { + case V4L2_ENC_CMD_START: + CX18_DEBUG_IOCTL("V4L2_ENC_CMD_START\n"); + enc->flags = 0; + break; + + case V4L2_ENC_CMD_STOP: + CX18_DEBUG_IOCTL("V4L2_ENC_CMD_STOP\n"); + enc->flags &= V4L2_ENC_CMD_STOP_AT_GOP_END; + break; + + case V4L2_ENC_CMD_PAUSE: + CX18_DEBUG_IOCTL("V4L2_ENC_CMD_PAUSE\n"); + enc->flags = 0; + break; + + case V4L2_ENC_CMD_RESUME: + CX18_DEBUG_IOCTL("V4L2_ENC_CMD_RESUME\n"); + enc->flags = 0; + break; + + default: + CX18_DEBUG_IOCTL("Unknown cmd %d\n", enc->cmd); + return -EINVAL; + } + return 0; +} + +static int cx18_log_status(struct file *file, void *fh) +{ + struct cx18 *cx = fh2id(fh)->cx; + struct v4l2_input vidin; + struct v4l2_audio audin; + int i; + + CX18_INFO("Version: %s Card: %s\n", CX18_VERSION, cx->card_name); + if (cx->hw_flags & CX18_HW_TVEEPROM) { + struct tveeprom tv; + + cx18_read_eeprom(cx, &tv); + } + cx18_call_all(cx, core, log_status); + cx18_get_input(cx, cx->active_input, &vidin); + cx18_get_audio_input(cx, cx->audio_input, &audin); + CX18_INFO("Video Input: %s\n", vidin.name); + CX18_INFO("Audio Input: %s\n", audin.name); + mutex_lock(&cx->gpio_lock); + CX18_INFO("GPIO: direction 0x%08x, value 0x%08x\n", + cx->gpio_dir, cx->gpio_val); + mutex_unlock(&cx->gpio_lock); + CX18_INFO("Tuner: %s\n", + test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ? "Radio" : "TV"); + v4l2_ctrl_handler_log_status(&cx->cxhdl.hdl, cx->v4l2_dev.name); + CX18_INFO("Status flags: 0x%08lx\n", cx->i_flags); + for (i = 0; i < CX18_MAX_STREAMS; i++) { + struct cx18_stream *s = &cx->streams[i]; + + if (s->video_dev == NULL || s->buffers == 0) + continue; + CX18_INFO("Stream %s: status 0x%04lx, %d%% of %d KiB (%d buffers) in use\n", + s->name, s->s_flags, + atomic_read(&s->q_full.depth) * s->bufs_per_mdl * 100 + / s->buffers, + (s->buffers * s->buf_size) / 1024, s->buffers); + } + CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n", + (long long)cx->mpg_data_received, + (long long)cx->vbi_data_inserted); + return 0; +} + +static long cx18_default(struct file *file, void *fh, bool valid_prio, + unsigned int cmd, void *arg) +{ + struct cx18 *cx = fh2id(fh)->cx; + + switch (cmd) { + case VIDIOC_INT_RESET: { + u32 val = *(u32 *)arg; + + if ((val == 0) || (val & 0x01)) + cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL, core, reset, + (u32) CX18_GPIO_RESET_Z8F0811); + break; + } + + default: + return -ENOTTY; + } + return 0; +} + +static const struct v4l2_ioctl_ops cx18_ioctl_ops = { + .vidioc_querycap = cx18_querycap, + .vidioc_s_audio = cx18_s_audio, + .vidioc_g_audio = cx18_g_audio, + .vidioc_enumaudio = cx18_enumaudio, + .vidioc_enum_input = cx18_enum_input, + .vidioc_cropcap = cx18_cropcap, + .vidioc_s_crop = cx18_s_crop, + .vidioc_g_crop = cx18_g_crop, + .vidioc_g_input = cx18_g_input, + .vidioc_s_input = cx18_s_input, + .vidioc_g_frequency = cx18_g_frequency, + .vidioc_s_frequency = cx18_s_frequency, + .vidioc_s_tuner = cx18_s_tuner, + .vidioc_g_tuner = cx18_g_tuner, + .vidioc_g_enc_index = cx18_g_enc_index, + .vidioc_g_std = cx18_g_std, + .vidioc_s_std = cx18_s_std, + .vidioc_log_status = cx18_log_status, + .vidioc_enum_fmt_vid_cap = cx18_enum_fmt_vid_cap, + .vidioc_encoder_cmd = cx18_encoder_cmd, + .vidioc_try_encoder_cmd = cx18_try_encoder_cmd, + .vidioc_g_fmt_vid_cap = cx18_g_fmt_vid_cap, + .vidioc_g_fmt_vbi_cap = cx18_g_fmt_vbi_cap, + .vidioc_g_fmt_sliced_vbi_cap = cx18_g_fmt_sliced_vbi_cap, + .vidioc_s_fmt_vid_cap = cx18_s_fmt_vid_cap, + .vidioc_s_fmt_vbi_cap = cx18_s_fmt_vbi_cap, + .vidioc_s_fmt_sliced_vbi_cap = cx18_s_fmt_sliced_vbi_cap, + .vidioc_try_fmt_vid_cap = cx18_try_fmt_vid_cap, + .vidioc_try_fmt_vbi_cap = cx18_try_fmt_vbi_cap, + .vidioc_try_fmt_sliced_vbi_cap = cx18_try_fmt_sliced_vbi_cap, + .vidioc_g_sliced_vbi_cap = cx18_g_sliced_vbi_cap, + .vidioc_g_chip_ident = cx18_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = cx18_g_register, + .vidioc_s_register = cx18_s_register, +#endif + .vidioc_default = cx18_default, + .vidioc_streamon = cx18_streamon, + .vidioc_streamoff = cx18_streamoff, + .vidioc_reqbufs = cx18_reqbufs, + .vidioc_querybuf = cx18_querybuf, + .vidioc_qbuf = cx18_qbuf, + .vidioc_dqbuf = cx18_dqbuf, +}; + +void cx18_set_funcs(struct video_device *vdev) +{ + vdev->ioctl_ops = &cx18_ioctl_ops; +} diff --git a/drivers/media/pci/cx18/cx18-ioctl.h b/drivers/media/pci/cx18/cx18-ioctl.h new file mode 100644 index 00000000..43433969 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-ioctl.h @@ -0,0 +1,31 @@ +/* + * cx18 ioctl system call + * + * Derived from ivtv-ioctl.h + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +u16 cx18_service2vbi(int type); +void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal); +u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt); +void cx18_set_funcs(struct video_device *vdev); +int cx18_s_std(struct file *file, void *fh, v4l2_std_id std); +int cx18_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf); +int cx18_s_input(struct file *file, void *fh, unsigned int inp); diff --git a/drivers/media/pci/cx18/cx18-irq.c b/drivers/media/pci/cx18/cx18-irq.c new file mode 100644 index 00000000..80edfe93 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-irq.c @@ -0,0 +1,81 @@ +/* + * cx18 interrupt handling + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-irq.h" +#include "cx18-mailbox.h" +#include "cx18-scb.h" + +static void xpu_ack(struct cx18 *cx, u32 sw2) +{ + if (sw2 & IRQ_CPU_TO_EPU_ACK) + wake_up(&cx->mb_cpu_waitq); + if (sw2 & IRQ_APU_TO_EPU_ACK) + wake_up(&cx->mb_apu_waitq); +} + +static void epu_cmd(struct cx18 *cx, u32 sw1) +{ + if (sw1 & IRQ_CPU_TO_EPU) + cx18_api_epu_cmd_irq(cx, CPU); + if (sw1 & IRQ_APU_TO_EPU) + cx18_api_epu_cmd_irq(cx, APU); +} + +irqreturn_t cx18_irq_handler(int irq, void *dev_id) +{ + struct cx18 *cx = (struct cx18 *)dev_id; + u32 sw1, sw2, hw2; + + sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & cx->sw1_irq_mask; + sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & cx->sw2_irq_mask; + hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & cx->hw2_irq_mask; + + if (sw1) + cx18_write_reg_expect(cx, sw1, SW1_INT_STATUS, ~sw1, sw1); + if (sw2) + cx18_write_reg_expect(cx, sw2, SW2_INT_STATUS, ~sw2, sw2); + if (hw2) + cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2); + + if (sw1 || sw2 || hw2) + CX18_DEBUG_HI_IRQ("received interrupts " + "SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); + + /* + * SW1 responses have to happen first. The sending XPU times out the + * incoming mailboxes on us rather rapidly. + */ + if (sw1) + epu_cmd(cx, sw1); + + /* To do: interrupt-based I2C handling + if (hw2 & (HW2_I2C1_INT|HW2_I2C2_INT)) { + } + */ + + if (sw2) + xpu_ack(cx, sw2); + + return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE; +} diff --git a/drivers/media/pci/cx18/cx18-irq.h b/drivers/media/pci/cx18/cx18-irq.h new file mode 100644 index 00000000..30e7eaf8 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-irq.h @@ -0,0 +1,35 @@ +/* + * cx18 interrupt handling + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#define HW2_I2C1_INT (1 << 22) +#define HW2_I2C2_INT (1 << 23) +#define HW2_INT_CLR_STATUS 0xc730c4 +#define HW2_INT_MASK5_PCI 0xc730e4 +#define SW1_INT_SET 0xc73100 +#define SW1_INT_STATUS 0xc73104 +#define SW1_INT_ENABLE_PCI 0xc7311c +#define SW2_INT_SET 0xc73140 +#define SW2_INT_STATUS 0xc73144 +#define SW2_INT_ENABLE_CPU 0xc73158 +#define SW2_INT_ENABLE_PCI 0xc7315c + +irqreturn_t cx18_irq_handler(int irq, void *dev_id); diff --git a/drivers/media/pci/cx18/cx18-mailbox.c b/drivers/media/pci/cx18/cx18-mailbox.c new file mode 100644 index 00000000..eabf00c6 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-mailbox.c @@ -0,0 +1,870 @@ +/* + * cx18 mailbox functions + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-scb.h" +#include "cx18-irq.h" +#include "cx18-mailbox.h" +#include "cx18-queue.h" +#include "cx18-streams.h" +#include "cx18-alsa-pcm.h" /* FIXME make configurable */ + +static const char *rpu_str[] = { "APU", "CPU", "EPU", "HPU" }; + +#define API_FAST (1 << 2) /* Short timeout */ +#define API_SLOW (1 << 3) /* Additional 300ms timeout */ + +struct cx18_api_info { + u32 cmd; + u8 flags; /* Flags, see above */ + u8 rpu; /* Processing unit */ + const char *name; /* The name of the command */ +}; + +#define API_ENTRY(rpu, x, f) { (x), (f), (rpu), #x } + +static const struct cx18_api_info api_info[] = { + /* MPEG encoder API */ + API_ENTRY(CPU, CX18_CPU_SET_CHANNEL_TYPE, 0), + API_ENTRY(CPU, CX18_EPU_DEBUG, 0), + API_ENTRY(CPU, CX18_CREATE_TASK, 0), + API_ENTRY(CPU, CX18_DESTROY_TASK, 0), + API_ENTRY(CPU, CX18_CPU_CAPTURE_START, API_SLOW), + API_ENTRY(CPU, CX18_CPU_CAPTURE_STOP, API_SLOW), + API_ENTRY(CPU, CX18_CPU_CAPTURE_PAUSE, 0), + API_ENTRY(CPU, CX18_CPU_CAPTURE_RESUME, 0), + API_ENTRY(CPU, CX18_CPU_SET_CHANNEL_TYPE, 0), + API_ENTRY(CPU, CX18_CPU_SET_STREAM_OUTPUT_TYPE, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_IN, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_RATE, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_RESOLUTION, 0), + API_ENTRY(CPU, CX18_CPU_SET_FILTER_PARAM, 0), + API_ENTRY(CPU, CX18_CPU_SET_SPATIAL_FILTER_TYPE, 0), + API_ENTRY(CPU, CX18_CPU_SET_MEDIAN_CORING, 0), + API_ENTRY(CPU, CX18_CPU_SET_INDEXTABLE, 0), + API_ENTRY(CPU, CX18_CPU_SET_AUDIO_PARAMETERS, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_MUTE, 0), + API_ENTRY(CPU, CX18_CPU_SET_AUDIO_MUTE, 0), + API_ENTRY(CPU, CX18_CPU_SET_MISC_PARAMETERS, 0), + API_ENTRY(CPU, CX18_CPU_SET_RAW_VBI_PARAM, API_SLOW), + API_ENTRY(CPU, CX18_CPU_SET_CAPTURE_LINE_NO, 0), + API_ENTRY(CPU, CX18_CPU_SET_COPYRIGHT, 0), + API_ENTRY(CPU, CX18_CPU_SET_AUDIO_PID, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_PID, 0), + API_ENTRY(CPU, CX18_CPU_SET_VER_CROP_LINE, 0), + API_ENTRY(CPU, CX18_CPU_SET_GOP_STRUCTURE, 0), + API_ENTRY(CPU, CX18_CPU_SET_SCENE_CHANGE_DETECTION, 0), + API_ENTRY(CPU, CX18_CPU_SET_ASPECT_RATIO, 0), + API_ENTRY(CPU, CX18_CPU_SET_SKIP_INPUT_FRAME, 0), + API_ENTRY(CPU, CX18_CPU_SET_SLICED_VBI_PARAM, 0), + API_ENTRY(CPU, CX18_CPU_SET_USERDATA_PLACE_HOLDER, 0), + API_ENTRY(CPU, CX18_CPU_GET_ENC_PTS, 0), + API_ENTRY(CPU, CX18_CPU_SET_VFC_PARAM, 0), + API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0), + API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST), + API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, API_SLOW), + API_ENTRY(APU, CX18_APU_START, 0), + API_ENTRY(APU, CX18_APU_STOP, 0), + API_ENTRY(APU, CX18_APU_RESETAI, 0), + API_ENTRY(CPU, CX18_CPU_DEBUG_PEEK32, 0), + API_ENTRY(0, 0, 0), +}; + +static const struct cx18_api_info *find_api_info(u32 cmd) +{ + int i; + + for (i = 0; api_info[i].cmd; i++) + if (api_info[i].cmd == cmd) + return &api_info[i]; + return NULL; +} + +/* Call with buf of n*11+1 bytes */ +static char *u32arr2hex(u32 data[], int n, char *buf) +{ + char *p; + int i; + + for (i = 0, p = buf; i < n; i++, p += 11) { + /* kernel snprintf() appends '\0' always */ + snprintf(p, 12, " %#010x", data[i]); + } + *p = '\0'; + return buf; +} + +static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name) +{ + char argstr[MAX_MB_ARGUMENTS*11+1]; + + if (!(cx18_debug & CX18_DBGFLG_API)) + return; + + CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s" + "\n", name, mb->request, mb->ack, mb->cmd, mb->error, + u32arr2hex(mb->args, MAX_MB_ARGUMENTS, argstr)); +} + + +/* + * Functions that run in a work_queue work handling context + */ + +static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl) +{ + struct cx18_buffer *buf; + + if (s->dvb == NULL || !s->dvb->enabled || mdl->bytesused == 0) + return; + + /* We ignore mdl and buf readpos accounting here - it doesn't matter */ + + /* The likely case */ + if (list_is_singular(&mdl->buf_list)) { + buf = list_first_entry(&mdl->buf_list, struct cx18_buffer, + list); + if (buf->bytesused) + dvb_dmx_swfilter(&s->dvb->demux, + buf->buf, buf->bytesused); + return; + } + + list_for_each_entry(buf, &mdl->buf_list, list) { + if (buf->bytesused == 0) + break; + dvb_dmx_swfilter(&s->dvb->demux, buf->buf, buf->bytesused); + } +} + +static void cx18_mdl_send_to_videobuf(struct cx18_stream *s, + struct cx18_mdl *mdl) +{ + struct cx18_videobuf_buffer *vb_buf; + struct cx18_buffer *buf; + u8 *p; + u32 offset = 0; + int dispatch = 0; + + if (mdl->bytesused == 0) + return; + + /* Acquire a videobuf buffer, clone to and and release it */ + spin_lock(&s->vb_lock); + if (list_empty(&s->vb_capture)) + goto out; + + vb_buf = list_first_entry(&s->vb_capture, struct cx18_videobuf_buffer, + vb.queue); + + p = videobuf_to_vmalloc(&vb_buf->vb); + if (!p) + goto out; + + offset = vb_buf->bytes_used; + list_for_each_entry(buf, &mdl->buf_list, list) { + if (buf->bytesused == 0) + break; + + if ((offset + buf->bytesused) <= vb_buf->vb.bsize) { + memcpy(p + offset, buf->buf, buf->bytesused); + offset += buf->bytesused; + vb_buf->bytes_used += buf->bytesused; + } + } + + /* If we've filled the buffer as per the callers res then dispatch it */ + if (vb_buf->bytes_used >= s->vb_bytes_per_frame) { + dispatch = 1; + vb_buf->bytes_used = 0; + } + + if (dispatch) { + vb_buf->vb.ts = ktime_to_timeval(ktime_get()); + list_del(&vb_buf->vb.queue); + vb_buf->vb.state = VIDEOBUF_DONE; + wake_up(&vb_buf->vb.done); + } + + mod_timer(&s->vb_timeout, msecs_to_jiffies(2000) + jiffies); + +out: + spin_unlock(&s->vb_lock); +} + +static void cx18_mdl_send_to_alsa(struct cx18 *cx, struct cx18_stream *s, + struct cx18_mdl *mdl) +{ + struct cx18_buffer *buf; + + if (mdl->bytesused == 0) + return; + + /* We ignore mdl and buf readpos accounting here - it doesn't matter */ + + /* The likely case */ + if (list_is_singular(&mdl->buf_list)) { + buf = list_first_entry(&mdl->buf_list, struct cx18_buffer, + list); + if (buf->bytesused) + cx->pcm_announce_callback(cx->alsa, buf->buf, + buf->bytesused); + return; + } + + list_for_each_entry(buf, &mdl->buf_list, list) { + if (buf->bytesused == 0) + break; + cx->pcm_announce_callback(cx->alsa, buf->buf, buf->bytesused); + } +} + +static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order) +{ + u32 handle, mdl_ack_count, id; + struct cx18_mailbox *mb; + struct cx18_mdl_ack *mdl_ack; + struct cx18_stream *s; + struct cx18_mdl *mdl; + int i; + + mb = &order->mb; + handle = mb->args[0]; + s = cx18_handle_to_stream(cx, handle); + + if (s == NULL) { + CX18_WARN("Got DMA done notification for unknown/inactive" + " handle %d, %s mailbox seq no %d\n", handle, + (order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ? + "stale" : "good", mb->request); + return; + } + + mdl_ack_count = mb->args[2]; + mdl_ack = order->mdl_ack; + for (i = 0; i < mdl_ack_count; i++, mdl_ack++) { + id = mdl_ack->id; + /* + * Simple integrity check for processing a stale (and possibly + * inconsistent mailbox): make sure the MDL id is in the + * valid range for the stream. + * + * We go through the trouble of dealing with stale mailboxes + * because most of the time, the mailbox data is still valid and + * unchanged (and in practice the firmware ping-pongs the + * two mdl_ack buffers so mdl_acks are not stale). + * + * There are occasions when we get a half changed mailbox, + * which this check catches for a handle & id mismatch. If the + * handle and id do correspond, the worst case is that we + * completely lost the old MDL, but pick up the new MDL + * early (but the new mdl_ack is guaranteed to be good in this + * case as the firmware wouldn't point us to a new mdl_ack until + * it's filled in). + * + * cx18_queue_get_mdl() will detect the lost MDLs + * and send them back to q_free for fw rotation eventually. + */ + if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) && + !(id >= s->mdl_base_idx && + id < (s->mdl_base_idx + s->buffers))) { + CX18_WARN("Fell behind! Ignoring stale mailbox with " + " inconsistent data. Lost MDL for mailbox " + "seq no %d\n", mb->request); + break; + } + mdl = cx18_queue_get_mdl(s, id, mdl_ack->data_used); + + CX18_DEBUG_HI_DMA("DMA DONE for %s (MDL %d)\n", s->name, id); + if (mdl == NULL) { + CX18_WARN("Could not find MDL %d for stream %s\n", + id, s->name); + continue; + } + + CX18_DEBUG_HI_DMA("%s recv bytesused = %d\n", + s->name, mdl->bytesused); + + if (s->type == CX18_ENC_STREAM_TYPE_TS) { + cx18_mdl_send_to_dvb(s, mdl); + cx18_enqueue(s, mdl, &s->q_free); + } else if (s->type == CX18_ENC_STREAM_TYPE_PCM) { + /* Pass the data to cx18-alsa */ + if (cx->pcm_announce_callback != NULL) { + cx18_mdl_send_to_alsa(cx, s, mdl); + cx18_enqueue(s, mdl, &s->q_free); + } else { + cx18_enqueue(s, mdl, &s->q_full); + } + } else if (s->type == CX18_ENC_STREAM_TYPE_YUV) { + cx18_mdl_send_to_videobuf(s, mdl); + cx18_enqueue(s, mdl, &s->q_free); + } else { + cx18_enqueue(s, mdl, &s->q_full); + if (s->type == CX18_ENC_STREAM_TYPE_IDX) + cx18_stream_rotate_idx_mdls(cx); + } + } + /* Put as many MDLs as possible back into fw use */ + cx18_stream_load_fw_queue(s); + + wake_up(&cx->dma_waitq); + if (s->id != -1) + wake_up(&s->waitq); +} + +static void epu_debug(struct cx18 *cx, struct cx18_in_work_order *order) +{ + char *p; + char *str = order->str; + + CX18_DEBUG_INFO("%x %s\n", order->mb.args[0], str); + p = strchr(str, '.'); + if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags) && p && p > str) + CX18_INFO("FW version: %s\n", p - 1); +} + +static void epu_cmd(struct cx18 *cx, struct cx18_in_work_order *order) +{ + switch (order->rpu) { + case CPU: + { + switch (order->mb.cmd) { + case CX18_EPU_DMA_DONE: + epu_dma_done(cx, order); + break; + case CX18_EPU_DEBUG: + epu_debug(cx, order); + break; + default: + CX18_WARN("Unknown CPU to EPU mailbox command %#0x\n", + order->mb.cmd); + break; + } + break; + } + case APU: + CX18_WARN("Unknown APU to EPU mailbox command %#0x\n", + order->mb.cmd); + break; + default: + break; + } +} + +static +void free_in_work_order(struct cx18 *cx, struct cx18_in_work_order *order) +{ + atomic_set(&order->pending, 0); +} + +void cx18_in_work_handler(struct work_struct *work) +{ + struct cx18_in_work_order *order = + container_of(work, struct cx18_in_work_order, work); + struct cx18 *cx = order->cx; + epu_cmd(cx, order); + free_in_work_order(cx, order); +} + + +/* + * Functions that run in an interrupt handling context + */ + +static void mb_ack_irq(struct cx18 *cx, struct cx18_in_work_order *order) +{ + struct cx18_mailbox __iomem *ack_mb; + u32 ack_irq, req; + + switch (order->rpu) { + case APU: + ack_irq = IRQ_EPU_TO_APU_ACK; + ack_mb = &cx->scb->apu2epu_mb; + break; + case CPU: + ack_irq = IRQ_EPU_TO_CPU_ACK; + ack_mb = &cx->scb->cpu2epu_mb; + break; + default: + CX18_WARN("Unhandled RPU (%d) for command %x ack\n", + order->rpu, order->mb.cmd); + return; + } + + req = order->mb.request; + /* Don't ack if the RPU has gotten impatient and timed us out */ + if (req != cx18_readl(cx, &ack_mb->request) || + req == cx18_readl(cx, &ack_mb->ack)) { + CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our " + "incoming %s to EPU mailbox (sequence no. %u) " + "while processing\n", + rpu_str[order->rpu], rpu_str[order->rpu], req); + order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC; + return; + } + cx18_writel(cx, req, &ack_mb->ack); + cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq); + return; +} + +static int epu_dma_done_irq(struct cx18 *cx, struct cx18_in_work_order *order) +{ + u32 handle, mdl_ack_offset, mdl_ack_count; + struct cx18_mailbox *mb; + int i; + + mb = &order->mb; + handle = mb->args[0]; + mdl_ack_offset = mb->args[1]; + mdl_ack_count = mb->args[2]; + + if (handle == CX18_INVALID_TASK_HANDLE || + mdl_ack_count == 0 || mdl_ack_count > CX18_MAX_MDL_ACKS) { + if ((order->flags & CX18_F_EWO_MB_STALE) == 0) + mb_ack_irq(cx, order); + return -1; + } + + for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32)) + ((u32 *)order->mdl_ack)[i / sizeof(u32)] = + cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i); + + if ((order->flags & CX18_F_EWO_MB_STALE) == 0) + mb_ack_irq(cx, order); + return 1; +} + +static +int epu_debug_irq(struct cx18 *cx, struct cx18_in_work_order *order) +{ + u32 str_offset; + char *str = order->str; + + str[0] = '\0'; + str_offset = order->mb.args[1]; + if (str_offset) { + cx18_setup_page(cx, str_offset); + cx18_memcpy_fromio(cx, str, cx->enc_mem + str_offset, 252); + str[252] = '\0'; + cx18_setup_page(cx, SCB_OFFSET); + } + + if ((order->flags & CX18_F_EWO_MB_STALE) == 0) + mb_ack_irq(cx, order); + + return str_offset ? 1 : 0; +} + +static inline +int epu_cmd_irq(struct cx18 *cx, struct cx18_in_work_order *order) +{ + int ret = -1; + + switch (order->rpu) { + case CPU: + { + switch (order->mb.cmd) { + case CX18_EPU_DMA_DONE: + ret = epu_dma_done_irq(cx, order); + break; + case CX18_EPU_DEBUG: + ret = epu_debug_irq(cx, order); + break; + default: + CX18_WARN("Unknown CPU to EPU mailbox command %#0x\n", + order->mb.cmd); + break; + } + break; + } + case APU: + CX18_WARN("Unknown APU to EPU mailbox command %#0x\n", + order->mb.cmd); + break; + default: + break; + } + return ret; +} + +static inline +struct cx18_in_work_order *alloc_in_work_order_irq(struct cx18 *cx) +{ + int i; + struct cx18_in_work_order *order = NULL; + + for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++) { + /* + * We only need "pending" atomic to inspect its contents, + * and need not do a check and set because: + * 1. Any work handler thread only clears "pending" and only + * on one, particular work order at a time, per handler thread. + * 2. "pending" is only set here, and we're serialized because + * we're called in an IRQ handler context. + */ + if (atomic_read(&cx->in_work_order[i].pending) == 0) { + order = &cx->in_work_order[i]; + atomic_set(&order->pending, 1); + break; + } + } + return order; +} + +void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu) +{ + struct cx18_mailbox __iomem *mb; + struct cx18_mailbox *order_mb; + struct cx18_in_work_order *order; + int submit; + int i; + + switch (rpu) { + case CPU: + mb = &cx->scb->cpu2epu_mb; + break; + case APU: + mb = &cx->scb->apu2epu_mb; + break; + default: + return; + } + + order = alloc_in_work_order_irq(cx); + if (order == NULL) { + CX18_WARN("Unable to find blank work order form to schedule " + "incoming mailbox command processing\n"); + return; + } + + order->flags = 0; + order->rpu = rpu; + order_mb = &order->mb; + + /* mb->cmd and mb->args[0] through mb->args[2] */ + for (i = 0; i < 4; i++) + (&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i); + + /* mb->request and mb->ack. N.B. we want to read mb->ack last */ + for (i = 0; i < 2; i++) + (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i); + + if (order_mb->request == order_mb->ack) { + CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our " + "incoming %s to EPU mailbox (sequence no. %u)" + "\n", + rpu_str[rpu], rpu_str[rpu], order_mb->request); + if (cx18_debug & CX18_DBGFLG_WARN) + dump_mb(cx, order_mb, "incoming"); + order->flags = CX18_F_EWO_MB_STALE_UPON_RECEIPT; + } + + /* + * Individual EPU command processing is responsible for ack-ing + * a non-stale mailbox as soon as possible + */ + submit = epu_cmd_irq(cx, order); + if (submit > 0) { + queue_work(cx->in_work_queue, &order->work); + } +} + + +/* + * Functions called from a non-interrupt, non work_queue context + */ + +static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) +{ + const struct cx18_api_info *info = find_api_info(cmd); + u32 irq, req, ack, err; + struct cx18_mailbox __iomem *mb; + wait_queue_head_t *waitq; + struct mutex *mb_lock; + unsigned long int t0, timeout, ret; + int i; + char argstr[MAX_MB_ARGUMENTS*11+1]; + DEFINE_WAIT(w); + + if (info == NULL) { + CX18_WARN("unknown cmd %x\n", cmd); + return -EINVAL; + } + + if (cx18_debug & CX18_DBGFLG_API) { /* only call u32arr2hex if needed */ + if (cmd == CX18_CPU_DE_SET_MDL) { + if (cx18_debug & CX18_DBGFLG_HIGHVOL) + CX18_DEBUG_HI_API("%s\tcmd %#010x args%s\n", + info->name, cmd, + u32arr2hex(data, args, argstr)); + } else + CX18_DEBUG_API("%s\tcmd %#010x args%s\n", + info->name, cmd, + u32arr2hex(data, args, argstr)); + } + + switch (info->rpu) { + case APU: + waitq = &cx->mb_apu_waitq; + mb_lock = &cx->epu2apu_mb_lock; + irq = IRQ_EPU_TO_APU; + mb = &cx->scb->epu2apu_mb; + break; + case CPU: + waitq = &cx->mb_cpu_waitq; + mb_lock = &cx->epu2cpu_mb_lock; + irq = IRQ_EPU_TO_CPU; + mb = &cx->scb->epu2cpu_mb; + break; + default: + CX18_WARN("Unknown RPU (%d) for API call\n", info->rpu); + return -EINVAL; + } + + mutex_lock(mb_lock); + /* + * Wait for an in-use mailbox to complete + * + * If the XPU is responding with Ack's, the mailbox shouldn't be in + * a busy state, since we serialize access to it on our end. + * + * If the wait for ack after sending a previous command was interrupted + * by a signal, we may get here and find a busy mailbox. After waiting, + * mark it "not busy" from our end, if the XPU hasn't ack'ed it still. + */ + req = cx18_readl(cx, &mb->request); + timeout = msecs_to_jiffies(10); + ret = wait_event_timeout(*waitq, + (ack = cx18_readl(cx, &mb->ack)) == req, + timeout); + if (req != ack) { + /* waited long enough, make the mbox "not busy" from our end */ + cx18_writel(cx, req, &mb->ack); + CX18_ERR("mbox was found stuck busy when setting up for %s; " + "clearing busy and trying to proceed\n", info->name); + } else if (ret != timeout) + CX18_DEBUG_API("waited %u msecs for busy mbox to be acked\n", + jiffies_to_msecs(timeout-ret)); + + /* Build the outgoing mailbox */ + req = ((req & 0xfffffffe) == 0xfffffffe) ? 1 : req + 1; + + cx18_writel(cx, cmd, &mb->cmd); + for (i = 0; i < args; i++) + cx18_writel(cx, data[i], &mb->args[i]); + cx18_writel(cx, 0, &mb->error); + cx18_writel(cx, req, &mb->request); + cx18_writel(cx, req - 1, &mb->ack); /* ensure ack & req are distinct */ + + /* + * Notify the XPU and wait for it to send an Ack back + */ + timeout = msecs_to_jiffies((info->flags & API_FAST) ? 10 : 20); + + CX18_DEBUG_HI_IRQ("sending interrupt SW1: %x to send %s\n", + irq, info->name); + + /* So we don't miss the wakeup, prepare to wait before notifying fw */ + prepare_to_wait(waitq, &w, TASK_UNINTERRUPTIBLE); + cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq); + + t0 = jiffies; + ack = cx18_readl(cx, &mb->ack); + if (ack != req) { + schedule_timeout(timeout); + ret = jiffies - t0; + ack = cx18_readl(cx, &mb->ack); + } else { + ret = jiffies - t0; + } + + finish_wait(waitq, &w); + + if (req != ack) { + mutex_unlock(mb_lock); + if (ret >= timeout) { + /* Timed out */ + CX18_DEBUG_WARN("sending %s timed out waiting %d msecs " + "for RPU acknowledgement\n", + info->name, jiffies_to_msecs(ret)); + } else { + CX18_DEBUG_WARN("woken up before mailbox ack was ready " + "after submitting %s to RPU. only " + "waited %d msecs on req %u but awakened" + " with unmatched ack %u\n", + info->name, + jiffies_to_msecs(ret), + req, ack); + } + return -EINVAL; + } + + if (ret >= timeout) + CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment " + "sending %s; timed out waiting %d msecs\n", + info->name, jiffies_to_msecs(ret)); + else + CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n", + jiffies_to_msecs(ret), info->name); + + /* Collect data returned by the XPU */ + for (i = 0; i < MAX_MB_ARGUMENTS; i++) + data[i] = cx18_readl(cx, &mb->args[i]); + err = cx18_readl(cx, &mb->error); + mutex_unlock(mb_lock); + + /* + * Wait for XPU to perform extra actions for the caller in some cases. + * e.g. CX18_CPU_DE_RELEASE_MDL will cause the CPU to send all MDLs + * back in a burst shortly thereafter + */ + if (info->flags & API_SLOW) + cx18_msleep_timeout(300, 0); + + if (err) + CX18_DEBUG_API("mailbox error %08x for command %s\n", err, + info->name); + return err ? -EIO : 0; +} + +int cx18_api(struct cx18 *cx, u32 cmd, int args, u32 data[]) +{ + return cx18_api_call(cx, cmd, args, data); +} + +static int cx18_set_filter_param(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + u32 mode; + int ret; + + mode = (cx->filter_mode & 1) ? 2 : (cx->spatial_strength ? 1 : 0); + ret = cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4, + s->handle, 1, mode, cx->spatial_strength); + mode = (cx->filter_mode & 2) ? 2 : (cx->temporal_strength ? 1 : 0); + ret = ret ? ret : cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4, + s->handle, 0, mode, cx->temporal_strength); + ret = ret ? ret : cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4, + s->handle, 2, cx->filter_mode >> 2, 0); + return ret; +} + +int cx18_api_func(void *priv, u32 cmd, int in, int out, + u32 data[CX2341X_MBOX_MAX_DATA]) +{ + struct cx18_stream *s = priv; + struct cx18 *cx = s->cx; + + switch (cmd) { + case CX2341X_ENC_SET_OUTPUT_PORT: + return 0; + case CX2341X_ENC_SET_FRAME_RATE: + return cx18_vapi(cx, CX18_CPU_SET_VIDEO_IN, 6, + s->handle, 0, 0, 0, 0, data[0]); + case CX2341X_ENC_SET_FRAME_SIZE: + return cx18_vapi(cx, CX18_CPU_SET_VIDEO_RESOLUTION, 3, + s->handle, data[1], data[0]); + case CX2341X_ENC_SET_STREAM_TYPE: + return cx18_vapi(cx, CX18_CPU_SET_STREAM_OUTPUT_TYPE, 2, + s->handle, data[0]); + case CX2341X_ENC_SET_ASPECT_RATIO: + return cx18_vapi(cx, CX18_CPU_SET_ASPECT_RATIO, 2, + s->handle, data[0]); + + case CX2341X_ENC_SET_GOP_PROPERTIES: + return cx18_vapi(cx, CX18_CPU_SET_GOP_STRUCTURE, 3, + s->handle, data[0], data[1]); + case CX2341X_ENC_SET_GOP_CLOSURE: + return 0; + case CX2341X_ENC_SET_AUDIO_PROPERTIES: + return cx18_vapi(cx, CX18_CPU_SET_AUDIO_PARAMETERS, 2, + s->handle, data[0]); + case CX2341X_ENC_MUTE_AUDIO: + return cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, + s->handle, data[0]); + case CX2341X_ENC_SET_BIT_RATE: + return cx18_vapi(cx, CX18_CPU_SET_VIDEO_RATE, 5, + s->handle, data[0], data[1], data[2], data[3]); + case CX2341X_ENC_MUTE_VIDEO: + return cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, + s->handle, data[0]); + case CX2341X_ENC_SET_FRAME_DROP_RATE: + return cx18_vapi(cx, CX18_CPU_SET_SKIP_INPUT_FRAME, 2, + s->handle, data[0]); + case CX2341X_ENC_MISC: + return cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 4, + s->handle, data[0], data[1], data[2]); + case CX2341X_ENC_SET_DNR_FILTER_MODE: + cx->filter_mode = (data[0] & 3) | (data[1] << 2); + return cx18_set_filter_param(s); + case CX2341X_ENC_SET_DNR_FILTER_PROPS: + cx->spatial_strength = data[0]; + cx->temporal_strength = data[1]; + return cx18_set_filter_param(s); + case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE: + return cx18_vapi(cx, CX18_CPU_SET_SPATIAL_FILTER_TYPE, 3, + s->handle, data[0], data[1]); + case CX2341X_ENC_SET_CORING_LEVELS: + return cx18_vapi(cx, CX18_CPU_SET_MEDIAN_CORING, 5, + s->handle, data[0], data[1], data[2], data[3]); + } + CX18_WARN("Unknown cmd %x\n", cmd); + return 0; +} + +int cx18_vapi_result(struct cx18 *cx, u32 data[MAX_MB_ARGUMENTS], + u32 cmd, int args, ...) +{ + va_list ap; + int i; + + va_start(ap, args); + for (i = 0; i < args; i++) + data[i] = va_arg(ap, u32); + va_end(ap); + return cx18_api(cx, cmd, args, data); +} + +int cx18_vapi(struct cx18 *cx, u32 cmd, int args, ...) +{ + u32 data[MAX_MB_ARGUMENTS]; + va_list ap; + int i; + + if (cx == NULL) { + CX18_ERR("cx == NULL (cmd=%x)\n", cmd); + return 0; + } + if (args > MAX_MB_ARGUMENTS) { + CX18_ERR("args too big (cmd=%x)\n", cmd); + args = MAX_MB_ARGUMENTS; + } + va_start(ap, args); + for (i = 0; i < args; i++) + data[i] = va_arg(ap, u32); + va_end(ap); + return cx18_api(cx, cmd, args, data); +} diff --git a/drivers/media/pci/cx18/cx18-mailbox.h b/drivers/media/pci/cx18/cx18-mailbox.h new file mode 100644 index 00000000..b63fdfaa --- /dev/null +++ b/drivers/media/pci/cx18/cx18-mailbox.h @@ -0,0 +1,95 @@ +/* + * cx18 mailbox functions + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef _CX18_MAILBOX_H_ +#define _CX18_MAILBOX_H_ + +/* mailbox max args */ +#define MAX_MB_ARGUMENTS 6 +/* compatibility, should be same as the define in cx2341x.h */ +#define CX2341X_MBOX_MAX_DATA 16 + +#define MB_RESERVED_HANDLE_0 0 +#define MB_RESERVED_HANDLE_1 0xFFFFFFFF + +#define APU 0 +#define CPU 1 +#define EPU 2 +#define HPU 3 + +struct cx18; + +/* + * This structure is used by CPU to provide completed MDL & buffers information. + * Its structure is dictated by the layout of the SCB, required by the + * firmware, but its definition needs to be here, instead of in cx18-scb.h, + * for mailbox work order scheduling + */ +struct cx18_mdl_ack { + u32 id; /* ID of a completed MDL */ + u32 data_used; /* Total data filled in the MDL with 'id' */ +}; + +/* The cx18_mailbox struct is the mailbox structure which is used for passing + messages between processors */ +struct cx18_mailbox { + /* The sender sets a handle in 'request' after he fills the command. The + 'request' should be different than 'ack'. The sender, also, generates + an interrupt on XPU2YPU_irq where XPU is the sender and YPU is the + receiver. */ + u32 request; + /* The receiver detects a new command when 'req' is different than 'ack'. + He sets 'ack' to the same value as 'req' to clear the command. He, also, + generates an interrupt on YPU2XPU_irq where XPU is the sender and YPU + is the receiver. */ + u32 ack; + u32 reserved[6]; + /* 'cmd' identifies the command. The list of these commands are in + cx23418.h */ + u32 cmd; + /* Each command can have up to 6 arguments */ + u32 args[MAX_MB_ARGUMENTS]; + /* The return code can be one of the codes in the file cx23418.h. If the + command is completed successfully, the error will be ERR_SYS_SUCCESS. + If it is pending, the code is ERR_SYS_PENDING. If it failed, the error + code would indicate the task from which the error originated and will + be one of the errors in cx23418.h. In that case, the following + applies ((error & 0xff) != 0). + If the command is pending, the return will be passed in a MB from the + receiver to the sender. 'req' will be returned in args[0] */ + u32 error; +}; + +struct cx18_stream; + +int cx18_api(struct cx18 *cx, u32 cmd, int args, u32 data[]); +int cx18_vapi_result(struct cx18 *cx, u32 data[MAX_MB_ARGUMENTS], u32 cmd, + int args, ...); +int cx18_vapi(struct cx18 *cx, u32 cmd, int args, ...); +int cx18_api_func(void *priv, u32 cmd, int in, int out, + u32 data[CX2341X_MBOX_MAX_DATA]); + +void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu); + +void cx18_in_work_handler(struct work_struct *work); + +#endif diff --git a/drivers/media/pci/cx18/cx18-queue.c b/drivers/media/pci/cx18/cx18-queue.c new file mode 100644 index 00000000..8884537b --- /dev/null +++ b/drivers/media/pci/cx18/cx18-queue.c @@ -0,0 +1,443 @@ +/* + * cx18 buffer queues + * + * Derived from ivtv-queue.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-queue.h" +#include "cx18-streams.h" +#include "cx18-scb.h" +#include "cx18-io.h" + +void cx18_buf_swap(struct cx18_buffer *buf) +{ + int i; + + for (i = 0; i < buf->bytesused; i += 4) + swab32s((u32 *)(buf->buf + i)); +} + +void _cx18_mdl_swap(struct cx18_mdl *mdl) +{ + struct cx18_buffer *buf; + + list_for_each_entry(buf, &mdl->buf_list, list) { + if (buf->bytesused == 0) + break; + cx18_buf_swap(buf); + } +} + +void cx18_queue_init(struct cx18_queue *q) +{ + INIT_LIST_HEAD(&q->list); + atomic_set(&q->depth, 0); + q->bytesused = 0; +} + +struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl, + struct cx18_queue *q, int to_front) +{ + /* clear the mdl if it is not to be enqueued to the full queue */ + if (q != &s->q_full) { + mdl->bytesused = 0; + mdl->readpos = 0; + mdl->m_flags = 0; + mdl->skipped = 0; + mdl->curr_buf = NULL; + } + + /* q_busy is restricted to a max buffer count imposed by firmware */ + if (q == &s->q_busy && + atomic_read(&q->depth) >= CX18_MAX_FW_MDLS_PER_STREAM) + q = &s->q_free; + + spin_lock(&q->lock); + + if (to_front) + list_add(&mdl->list, &q->list); /* LIFO */ + else + list_add_tail(&mdl->list, &q->list); /* FIFO */ + q->bytesused += mdl->bytesused - mdl->readpos; + atomic_inc(&q->depth); + + spin_unlock(&q->lock); + return q; +} + +struct cx18_mdl *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q) +{ + struct cx18_mdl *mdl = NULL; + + spin_lock(&q->lock); + if (!list_empty(&q->list)) { + mdl = list_first_entry(&q->list, struct cx18_mdl, list); + list_del_init(&mdl->list); + q->bytesused -= mdl->bytesused - mdl->readpos; + mdl->skipped = 0; + atomic_dec(&q->depth); + } + spin_unlock(&q->lock); + return mdl; +} + +static void _cx18_mdl_update_bufs_for_cpu(struct cx18_stream *s, + struct cx18_mdl *mdl) +{ + struct cx18_buffer *buf; + u32 buf_size = s->buf_size; + u32 bytesused = mdl->bytesused; + + list_for_each_entry(buf, &mdl->buf_list, list) { + buf->readpos = 0; + if (bytesused >= buf_size) { + buf->bytesused = buf_size; + bytesused -= buf_size; + } else { + buf->bytesused = bytesused; + bytesused = 0; + } + cx18_buf_sync_for_cpu(s, buf); + } +} + +static inline void cx18_mdl_update_bufs_for_cpu(struct cx18_stream *s, + struct cx18_mdl *mdl) +{ + struct cx18_buffer *buf; + + if (list_is_singular(&mdl->buf_list)) { + buf = list_first_entry(&mdl->buf_list, struct cx18_buffer, + list); + buf->bytesused = mdl->bytesused; + buf->readpos = 0; + cx18_buf_sync_for_cpu(s, buf); + } else { + _cx18_mdl_update_bufs_for_cpu(s, mdl); + } +} + +struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id, + u32 bytesused) +{ + struct cx18 *cx = s->cx; + struct cx18_mdl *mdl; + struct cx18_mdl *tmp; + struct cx18_mdl *ret = NULL; + LIST_HEAD(sweep_up); + + /* + * We don't have to acquire multiple q locks here, because we are + * serialized by the single threaded work handler. + * MDLs from the firmware will thus remain in order as + * they are moved from q_busy to q_full or to the dvb ring buffer. + */ + spin_lock(&s->q_busy.lock); + list_for_each_entry_safe(mdl, tmp, &s->q_busy.list, list) { + /* + * We should find what the firmware told us is done, + * right at the front of the queue. If we don't, we likely have + * missed an mdl done message from the firmware. + * Once we skip an mdl repeatedly, relative to the size of + * q_busy, we have high confidence we've missed it. + */ + if (mdl->id != id) { + mdl->skipped++; + if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) { + /* mdl must have fallen out of rotation */ + CX18_WARN("Skipped %s, MDL %d, %d " + "times - it must have dropped out of " + "rotation\n", s->name, mdl->id, + mdl->skipped); + /* Sweep it up to put it back into rotation */ + list_move_tail(&mdl->list, &sweep_up); + atomic_dec(&s->q_busy.depth); + } + continue; + } + /* + * We pull the desired mdl off of the queue here. Something + * will have to put it back on a queue later. + */ + list_del_init(&mdl->list); + atomic_dec(&s->q_busy.depth); + ret = mdl; + break; + } + spin_unlock(&s->q_busy.lock); + + /* + * We found the mdl for which we were looking. Get it ready for + * the caller to put on q_full or in the dvb ring buffer. + */ + if (ret != NULL) { + ret->bytesused = bytesused; + ret->skipped = 0; + /* 0'ed readpos, m_flags & curr_buf when mdl went on q_busy */ + cx18_mdl_update_bufs_for_cpu(s, ret); + if (s->type != CX18_ENC_STREAM_TYPE_TS) + set_bit(CX18_F_M_NEED_SWAP, &ret->m_flags); + } + + /* Put any mdls the firmware is ignoring back into normal rotation */ + list_for_each_entry_safe(mdl, tmp, &sweep_up, list) { + list_del_init(&mdl->list); + cx18_enqueue(s, mdl, &s->q_free); + } + return ret; +} + +/* Move all mdls of a queue, while flushing the mdl */ +static void cx18_queue_flush(struct cx18_stream *s, + struct cx18_queue *q_src, struct cx18_queue *q_dst) +{ + struct cx18_mdl *mdl; + + /* It only makes sense to flush to q_free or q_idle */ + if (q_src == q_dst || q_dst == &s->q_full || q_dst == &s->q_busy) + return; + + spin_lock(&q_src->lock); + spin_lock(&q_dst->lock); + while (!list_empty(&q_src->list)) { + mdl = list_first_entry(&q_src->list, struct cx18_mdl, list); + list_move_tail(&mdl->list, &q_dst->list); + mdl->bytesused = 0; + mdl->readpos = 0; + mdl->m_flags = 0; + mdl->skipped = 0; + mdl->curr_buf = NULL; + atomic_inc(&q_dst->depth); + } + cx18_queue_init(q_src); + spin_unlock(&q_src->lock); + spin_unlock(&q_dst->lock); +} + +void cx18_flush_queues(struct cx18_stream *s) +{ + cx18_queue_flush(s, &s->q_busy, &s->q_free); + cx18_queue_flush(s, &s->q_full, &s->q_free); +} + +/* + * Note, s->buf_pool is not protected by a lock, + * the stream better not have *anything* going on when calling this + */ +void cx18_unload_queues(struct cx18_stream *s) +{ + struct cx18_queue *q_idle = &s->q_idle; + struct cx18_mdl *mdl; + struct cx18_buffer *buf; + + /* Move all MDLS to q_idle */ + cx18_queue_flush(s, &s->q_busy, q_idle); + cx18_queue_flush(s, &s->q_full, q_idle); + cx18_queue_flush(s, &s->q_free, q_idle); + + /* Reset MDL id's and move all buffers back to the stream's buf_pool */ + spin_lock(&q_idle->lock); + list_for_each_entry(mdl, &q_idle->list, list) { + while (!list_empty(&mdl->buf_list)) { + buf = list_first_entry(&mdl->buf_list, + struct cx18_buffer, list); + list_move_tail(&buf->list, &s->buf_pool); + buf->bytesused = 0; + buf->readpos = 0; + } + mdl->id = s->mdl_base_idx; /* reset id to a "safe" value */ + /* all other mdl fields were cleared by cx18_queue_flush() */ + } + spin_unlock(&q_idle->lock); +} + +/* + * Note, s->buf_pool is not protected by a lock, + * the stream better not have *anything* going on when calling this + */ +void cx18_load_queues(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + struct cx18_mdl *mdl; + struct cx18_buffer *buf; + int mdl_id; + int i; + u32 partial_buf_size; + + /* + * Attach buffers to MDLs, give the MDLs ids, and add MDLs to q_free + * Excess MDLs are left on q_idle + * Excess buffers are left in buf_pool and/or on an MDL in q_idle + */ + mdl_id = s->mdl_base_idx; + for (mdl = cx18_dequeue(s, &s->q_idle), i = s->bufs_per_mdl; + mdl != NULL && i == s->bufs_per_mdl; + mdl = cx18_dequeue(s, &s->q_idle)) { + + mdl->id = mdl_id; + + for (i = 0; i < s->bufs_per_mdl; i++) { + if (list_empty(&s->buf_pool)) + break; + + buf = list_first_entry(&s->buf_pool, struct cx18_buffer, + list); + list_move_tail(&buf->list, &mdl->buf_list); + + /* update the firmware's MDL array with this buffer */ + cx18_writel(cx, buf->dma_handle, + &cx->scb->cpu_mdl[mdl_id + i].paddr); + cx18_writel(cx, s->buf_size, + &cx->scb->cpu_mdl[mdl_id + i].length); + } + + if (i == s->bufs_per_mdl) { + /* + * The encoder doesn't honor s->mdl_size. So in the + * case of a non-integral number of buffers to meet + * mdl_size, we lie about the size of the last buffer + * in the MDL to get the encoder to really only send + * us mdl_size bytes per MDL transfer. + */ + partial_buf_size = s->mdl_size % s->buf_size; + if (partial_buf_size) { + cx18_writel(cx, partial_buf_size, + &cx->scb->cpu_mdl[mdl_id + i - 1].length); + } + cx18_enqueue(s, mdl, &s->q_free); + } else { + /* Not enough buffers for this MDL; we won't use it */ + cx18_push(s, mdl, &s->q_idle); + } + mdl_id += i; + } +} + +void _cx18_mdl_sync_for_device(struct cx18_stream *s, struct cx18_mdl *mdl) +{ + int dma = s->dma; + u32 buf_size = s->buf_size; + struct pci_dev *pci_dev = s->cx->pci_dev; + struct cx18_buffer *buf; + + list_for_each_entry(buf, &mdl->buf_list, list) + pci_dma_sync_single_for_device(pci_dev, buf->dma_handle, + buf_size, dma); +} + +int cx18_stream_alloc(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + int i; + + if (s->buffers == 0) + return 0; + + CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers " + "(%d.%02d kB total)\n", + s->name, s->buffers, s->buf_size, + s->buffers * s->buf_size / 1024, + (s->buffers * s->buf_size * 100 / 1024) % 100); + + if (((char __iomem *)&cx->scb->cpu_mdl[cx->free_mdl_idx + s->buffers] - + (char __iomem *)cx->scb) > SCB_RESERVED_SIZE) { + unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE - + ((char __iomem *)cx->scb->cpu_mdl)); + + CX18_ERR("Too many buffers, cannot fit in SCB area\n"); + CX18_ERR("Max buffers = %zd\n", + bufsz / sizeof(struct cx18_mdl_ent)); + return -ENOMEM; + } + + s->mdl_base_idx = cx->free_mdl_idx; + + /* allocate stream buffers and MDLs */ + for (i = 0; i < s->buffers; i++) { + struct cx18_mdl *mdl; + struct cx18_buffer *buf; + + /* 1 MDL per buffer to handle the worst & also default case */ + mdl = kzalloc(sizeof(struct cx18_mdl), GFP_KERNEL|__GFP_NOWARN); + if (mdl == NULL) + break; + + buf = kzalloc(sizeof(struct cx18_buffer), + GFP_KERNEL|__GFP_NOWARN); + if (buf == NULL) { + kfree(mdl); + break; + } + + buf->buf = kmalloc(s->buf_size, GFP_KERNEL|__GFP_NOWARN); + if (buf->buf == NULL) { + kfree(mdl); + kfree(buf); + break; + } + + INIT_LIST_HEAD(&mdl->list); + INIT_LIST_HEAD(&mdl->buf_list); + mdl->id = s->mdl_base_idx; /* a somewhat safe value */ + cx18_enqueue(s, mdl, &s->q_idle); + + INIT_LIST_HEAD(&buf->list); + buf->dma_handle = pci_map_single(s->cx->pci_dev, + buf->buf, s->buf_size, s->dma); + cx18_buf_sync_for_cpu(s, buf); + list_add_tail(&buf->list, &s->buf_pool); + } + if (i == s->buffers) { + cx->free_mdl_idx += s->buffers; + return 0; + } + CX18_ERR("Couldn't allocate buffers for %s stream\n", s->name); + cx18_stream_free(s); + return -ENOMEM; +} + +void cx18_stream_free(struct cx18_stream *s) +{ + struct cx18_mdl *mdl; + struct cx18_buffer *buf; + struct cx18 *cx = s->cx; + + CX18_DEBUG_INFO("Deallocating buffers for %s stream\n", s->name); + + /* move all buffers to buf_pool and all MDLs to q_idle */ + cx18_unload_queues(s); + + /* empty q_idle */ + while ((mdl = cx18_dequeue(s, &s->q_idle))) + kfree(mdl); + + /* empty buf_pool */ + while (!list_empty(&s->buf_pool)) { + buf = list_first_entry(&s->buf_pool, struct cx18_buffer, list); + list_del_init(&buf->list); + + pci_unmap_single(s->cx->pci_dev, buf->dma_handle, + s->buf_size, s->dma); + kfree(buf->buf); + kfree(buf); + } +} diff --git a/drivers/media/pci/cx18/cx18-queue.h b/drivers/media/pci/cx18/cx18-queue.h new file mode 100644 index 00000000..4201ddc1 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-queue.h @@ -0,0 +1,98 @@ +/* + * cx18 buffer queues + * + * Derived from ivtv-queue.h + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#define CX18_DMA_UNMAPPED ((u32) -1) + +/* cx18_buffer utility functions */ + +static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s, + struct cx18_buffer *buf) +{ + pci_dma_sync_single_for_cpu(s->cx->pci_dev, buf->dma_handle, + s->buf_size, s->dma); +} + +static inline void cx18_buf_sync_for_device(struct cx18_stream *s, + struct cx18_buffer *buf) +{ + pci_dma_sync_single_for_device(s->cx->pci_dev, buf->dma_handle, + s->buf_size, s->dma); +} + +void _cx18_mdl_sync_for_device(struct cx18_stream *s, struct cx18_mdl *mdl); + +static inline void cx18_mdl_sync_for_device(struct cx18_stream *s, + struct cx18_mdl *mdl) +{ + if (list_is_singular(&mdl->buf_list)) + cx18_buf_sync_for_device(s, list_first_entry(&mdl->buf_list, + struct cx18_buffer, + list)); + else + _cx18_mdl_sync_for_device(s, mdl); +} + +void cx18_buf_swap(struct cx18_buffer *buf); +void _cx18_mdl_swap(struct cx18_mdl *mdl); + +static inline void cx18_mdl_swap(struct cx18_mdl *mdl) +{ + if (list_is_singular(&mdl->buf_list)) + cx18_buf_swap(list_first_entry(&mdl->buf_list, + struct cx18_buffer, list)); + else + _cx18_mdl_swap(mdl); +} + +/* cx18_queue utility functions */ +struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl, + struct cx18_queue *q, int to_front); + +static inline +struct cx18_queue *cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl, + struct cx18_queue *q) +{ + return _cx18_enqueue(s, mdl, q, 0); /* FIFO */ +} + +static inline +struct cx18_queue *cx18_push(struct cx18_stream *s, struct cx18_mdl *mdl, + struct cx18_queue *q) +{ + return _cx18_enqueue(s, mdl, q, 1); /* LIFO */ +} + +void cx18_queue_init(struct cx18_queue *q); +struct cx18_mdl *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q); +struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id, + u32 bytesused); +void cx18_flush_queues(struct cx18_stream *s); + +/* queue MDL reconfiguration helpers */ +void cx18_unload_queues(struct cx18_stream *s); +void cx18_load_queues(struct cx18_stream *s); + +/* cx18_stream utility functions */ +int cx18_stream_alloc(struct cx18_stream *s); +void cx18_stream_free(struct cx18_stream *s); diff --git a/drivers/media/pci/cx18/cx18-scb.c b/drivers/media/pci/cx18/cx18-scb.c new file mode 100644 index 00000000..85cc5963 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-scb.c @@ -0,0 +1,122 @@ +/* + * cx18 System Control Block initialization + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-scb.h" + +void cx18_init_scb(struct cx18 *cx) +{ + cx18_setup_page(cx, SCB_OFFSET); + cx18_memset_io(cx, cx->scb, 0, 0x10000); + + cx18_writel(cx, IRQ_APU_TO_CPU, &cx->scb->apu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_CPU, &cx->scb->hpu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_CPU, &cx->scb->ppu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_CPU, &cx->scb->epu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack); + + cx18_writel(cx, IRQ_CPU_TO_APU, &cx->scb->cpu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_APU, &cx->scb->hpu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_APU, &cx->scb->ppu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_APU, &cx->scb->epu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack); + + cx18_writel(cx, IRQ_CPU_TO_HPU, &cx->scb->cpu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_HPU, &cx->scb->apu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_HPU, &cx->scb->ppu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_HPU, &cx->scb->epu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack); + + cx18_writel(cx, IRQ_CPU_TO_PPU, &cx->scb->cpu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_PPU, &cx->scb->apu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_PPU, &cx->scb->hpu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_PPU, &cx->scb->epu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack); + + cx18_writel(cx, IRQ_CPU_TO_EPU, &cx->scb->cpu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_EPU, &cx->scb->apu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_EPU, &cx->scb->hpu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_EPU, &cx->scb->ppu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack); + + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb), + &cx->scb->apu2cpu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb), + &cx->scb->hpu2cpu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb), + &cx->scb->ppu2cpu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb), + &cx->scb->epu2cpu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb), + &cx->scb->cpu2apu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb), + &cx->scb->hpu2apu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb), + &cx->scb->ppu2apu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb), + &cx->scb->epu2apu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb), + &cx->scb->cpu2hpu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb), + &cx->scb->apu2hpu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb), + &cx->scb->ppu2hpu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb), + &cx->scb->epu2hpu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb), + &cx->scb->cpu2ppu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb), + &cx->scb->apu2ppu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb), + &cx->scb->hpu2ppu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb), + &cx->scb->epu2ppu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb), + &cx->scb->cpu2epu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb), + &cx->scb->apu2epu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb), + &cx->scb->hpu2epu_mb_offset); + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb), + &cx->scb->ppu2epu_mb_offset); + + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu_state), + &cx->scb->ipc_offset); + + cx18_writel(cx, 1, &cx->scb->epu_state); +} diff --git a/drivers/media/pci/cx18/cx18-scb.h b/drivers/media/pci/cx18/cx18-scb.h new file mode 100644 index 00000000..08877652 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-scb.h @@ -0,0 +1,280 @@ +/* + * cx18 System Control Block initialization + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_SCB_H +#define CX18_SCB_H + +#include "cx18-mailbox.h" + +/* NOTE: All ACK interrupts are in the SW2 register. All non-ACK interrupts + are in the SW1 register. */ + +#define IRQ_APU_TO_CPU 0x00000001 +#define IRQ_CPU_TO_APU_ACK 0x00000001 +#define IRQ_HPU_TO_CPU 0x00000002 +#define IRQ_CPU_TO_HPU_ACK 0x00000002 +#define IRQ_PPU_TO_CPU 0x00000004 +#define IRQ_CPU_TO_PPU_ACK 0x00000004 +#define IRQ_EPU_TO_CPU 0x00000008 +#define IRQ_CPU_TO_EPU_ACK 0x00000008 + +#define IRQ_CPU_TO_APU 0x00000010 +#define IRQ_APU_TO_CPU_ACK 0x00000010 +#define IRQ_HPU_TO_APU 0x00000020 +#define IRQ_APU_TO_HPU_ACK 0x00000020 +#define IRQ_PPU_TO_APU 0x00000040 +#define IRQ_APU_TO_PPU_ACK 0x00000040 +#define IRQ_EPU_TO_APU 0x00000080 +#define IRQ_APU_TO_EPU_ACK 0x00000080 + +#define IRQ_CPU_TO_HPU 0x00000100 +#define IRQ_HPU_TO_CPU_ACK 0x00000100 +#define IRQ_APU_TO_HPU 0x00000200 +#define IRQ_HPU_TO_APU_ACK 0x00000200 +#define IRQ_PPU_TO_HPU 0x00000400 +#define IRQ_HPU_TO_PPU_ACK 0x00000400 +#define IRQ_EPU_TO_HPU 0x00000800 +#define IRQ_HPU_TO_EPU_ACK 0x00000800 + +#define IRQ_CPU_TO_PPU 0x00001000 +#define IRQ_PPU_TO_CPU_ACK 0x00001000 +#define IRQ_APU_TO_PPU 0x00002000 +#define IRQ_PPU_TO_APU_ACK 0x00002000 +#define IRQ_HPU_TO_PPU 0x00004000 +#define IRQ_PPU_TO_HPU_ACK 0x00004000 +#define IRQ_EPU_TO_PPU 0x00008000 +#define IRQ_PPU_TO_EPU_ACK 0x00008000 + +#define IRQ_CPU_TO_EPU 0x00010000 +#define IRQ_EPU_TO_CPU_ACK 0x00010000 +#define IRQ_APU_TO_EPU 0x00020000 +#define IRQ_EPU_TO_APU_ACK 0x00020000 +#define IRQ_HPU_TO_EPU 0x00040000 +#define IRQ_EPU_TO_HPU_ACK 0x00040000 +#define IRQ_PPU_TO_EPU 0x00080000 +#define IRQ_EPU_TO_PPU_ACK 0x00080000 + +#define SCB_OFFSET 0xDC0000 + +/* If Firmware uses fixed memory map, it shall not allocate the area + between SCB_OFFSET and SCB_OFFSET+SCB_RESERVED_SIZE-1 inclusive */ +#define SCB_RESERVED_SIZE 0x10000 + + +/* This structure is used by EPU to provide memory descriptors in its memory */ +struct cx18_mdl_ent { + u32 paddr; /* Physical address of a buffer segment */ + u32 length; /* Length of the buffer segment */ +}; + +struct cx18_scb { + /* These fields form the System Control Block which is used at boot time + for localizing the IPC data as well as the code positions for all + processors. The offsets are from the start of this struct. */ + + /* Offset where to find the Inter-Processor Communication data */ + u32 ipc_offset; + u32 reserved01[7]; + /* Offset where to find the start of the CPU code */ + u32 cpu_code_offset; + u32 reserved02[3]; + /* Offset where to find the start of the APU code */ + u32 apu_code_offset; + u32 reserved03[3]; + /* Offset where to find the start of the HPU code */ + u32 hpu_code_offset; + u32 reserved04[3]; + /* Offset where to find the start of the PPU code */ + u32 ppu_code_offset; + u32 reserved05[3]; + + /* These fields form Inter-Processor Communication data which is used + by all processors to locate the information needed for communicating + with other processors */ + + /* Fields for CPU: */ + + /* bit 0: 1/0 processor ready/not ready. Set other bits to 0. */ + u32 cpu_state; + u32 reserved1[7]; + /* Offset to the mailbox used for sending commands from APU to CPU */ + u32 apu2cpu_mb_offset; + /* Value to write to register SW1 register set (0xC7003100) after the + command is ready */ + u32 apu2cpu_irq; + /* Value to write to register SW2 register set (0xC7003140) after the + command is cleared */ + u32 cpu2apu_irq_ack; + u32 reserved2[13]; + + u32 hpu2cpu_mb_offset; + u32 hpu2cpu_irq; + u32 cpu2hpu_irq_ack; + u32 reserved3[13]; + + u32 ppu2cpu_mb_offset; + u32 ppu2cpu_irq; + u32 cpu2ppu_irq_ack; + u32 reserved4[13]; + + u32 epu2cpu_mb_offset; + u32 epu2cpu_irq; + u32 cpu2epu_irq_ack; + u32 reserved5[13]; + u32 reserved6[8]; + + /* Fields for APU: */ + + u32 apu_state; + u32 reserved11[7]; + u32 cpu2apu_mb_offset; + u32 cpu2apu_irq; + u32 apu2cpu_irq_ack; + u32 reserved12[13]; + + u32 hpu2apu_mb_offset; + u32 hpu2apu_irq; + u32 apu2hpu_irq_ack; + u32 reserved13[13]; + + u32 ppu2apu_mb_offset; + u32 ppu2apu_irq; + u32 apu2ppu_irq_ack; + u32 reserved14[13]; + + u32 epu2apu_mb_offset; + u32 epu2apu_irq; + u32 apu2epu_irq_ack; + u32 reserved15[13]; + u32 reserved16[8]; + + /* Fields for HPU: */ + + u32 hpu_state; + u32 reserved21[7]; + u32 cpu2hpu_mb_offset; + u32 cpu2hpu_irq; + u32 hpu2cpu_irq_ack; + u32 reserved22[13]; + + u32 apu2hpu_mb_offset; + u32 apu2hpu_irq; + u32 hpu2apu_irq_ack; + u32 reserved23[13]; + + u32 ppu2hpu_mb_offset; + u32 ppu2hpu_irq; + u32 hpu2ppu_irq_ack; + u32 reserved24[13]; + + u32 epu2hpu_mb_offset; + u32 epu2hpu_irq; + u32 hpu2epu_irq_ack; + u32 reserved25[13]; + u32 reserved26[8]; + + /* Fields for PPU: */ + + u32 ppu_state; + u32 reserved31[7]; + u32 cpu2ppu_mb_offset; + u32 cpu2ppu_irq; + u32 ppu2cpu_irq_ack; + u32 reserved32[13]; + + u32 apu2ppu_mb_offset; + u32 apu2ppu_irq; + u32 ppu2apu_irq_ack; + u32 reserved33[13]; + + u32 hpu2ppu_mb_offset; + u32 hpu2ppu_irq; + u32 ppu2hpu_irq_ack; + u32 reserved34[13]; + + u32 epu2ppu_mb_offset; + u32 epu2ppu_irq; + u32 ppu2epu_irq_ack; + u32 reserved35[13]; + u32 reserved36[8]; + + /* Fields for EPU: */ + + u32 epu_state; + u32 reserved41[7]; + u32 cpu2epu_mb_offset; + u32 cpu2epu_irq; + u32 epu2cpu_irq_ack; + u32 reserved42[13]; + + u32 apu2epu_mb_offset; + u32 apu2epu_irq; + u32 epu2apu_irq_ack; + u32 reserved43[13]; + + u32 hpu2epu_mb_offset; + u32 hpu2epu_irq; + u32 epu2hpu_irq_ack; + u32 reserved44[13]; + + u32 ppu2epu_mb_offset; + u32 ppu2epu_irq; + u32 epu2ppu_irq_ack; + u32 reserved45[13]; + u32 reserved46[8]; + + u32 semaphores[8]; /* Semaphores */ + + u32 reserved50[32]; /* Reserved for future use */ + + struct cx18_mailbox apu2cpu_mb; + struct cx18_mailbox hpu2cpu_mb; + struct cx18_mailbox ppu2cpu_mb; + struct cx18_mailbox epu2cpu_mb; + + struct cx18_mailbox cpu2apu_mb; + struct cx18_mailbox hpu2apu_mb; + struct cx18_mailbox ppu2apu_mb; + struct cx18_mailbox epu2apu_mb; + + struct cx18_mailbox cpu2hpu_mb; + struct cx18_mailbox apu2hpu_mb; + struct cx18_mailbox ppu2hpu_mb; + struct cx18_mailbox epu2hpu_mb; + + struct cx18_mailbox cpu2ppu_mb; + struct cx18_mailbox apu2ppu_mb; + struct cx18_mailbox hpu2ppu_mb; + struct cx18_mailbox epu2ppu_mb; + + struct cx18_mailbox cpu2epu_mb; + struct cx18_mailbox apu2epu_mb; + struct cx18_mailbox hpu2epu_mb; + struct cx18_mailbox ppu2epu_mb; + + struct cx18_mdl_ack cpu_mdl_ack[CX18_MAX_STREAMS][CX18_MAX_MDL_ACKS]; + struct cx18_mdl_ent cpu_mdl[1]; +}; + +void cx18_init_scb(struct cx18 *cx); + +#endif diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c new file mode 100644 index 00000000..843c62b2 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-streams.c @@ -0,0 +1,1059 @@ +/* + * cx18 init/start/stop/exit stream functions + * + * Derived from ivtv-streams.c + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-fileops.h" +#include "cx18-mailbox.h" +#include "cx18-i2c.h" +#include "cx18-queue.h" +#include "cx18-ioctl.h" +#include "cx18-streams.h" +#include "cx18-cards.h" +#include "cx18-scb.h" +#include "cx18-dvb.h" + +#define CX18_DSP0_INTERRUPT_MASK 0xd0004C + +static struct v4l2_file_operations cx18_v4l2_enc_fops = { + .owner = THIS_MODULE, + .read = cx18_v4l2_read, + .open = cx18_v4l2_open, + .unlocked_ioctl = video_ioctl2, + .release = cx18_v4l2_close, + .poll = cx18_v4l2_enc_poll, + .mmap = cx18_v4l2_mmap, +}; + +/* offset from 0 to register ts v4l2 minors on */ +#define CX18_V4L2_ENC_TS_OFFSET 16 +/* offset from 0 to register pcm v4l2 minors on */ +#define CX18_V4L2_ENC_PCM_OFFSET 24 +/* offset from 0 to register yuv v4l2 minors on */ +#define CX18_V4L2_ENC_YUV_OFFSET 32 + +static struct { + const char *name; + int vfl_type; + int num_offset; + int dma; +} cx18_stream_info[] = { + { /* CX18_ENC_STREAM_TYPE_MPG */ + "encoder MPEG", + VFL_TYPE_GRABBER, 0, + PCI_DMA_FROMDEVICE, + }, + { /* CX18_ENC_STREAM_TYPE_TS */ + "TS", + VFL_TYPE_GRABBER, -1, + PCI_DMA_FROMDEVICE, + }, + { /* CX18_ENC_STREAM_TYPE_YUV */ + "encoder YUV", + VFL_TYPE_GRABBER, CX18_V4L2_ENC_YUV_OFFSET, + PCI_DMA_FROMDEVICE, + }, + { /* CX18_ENC_STREAM_TYPE_VBI */ + "encoder VBI", + VFL_TYPE_VBI, 0, + PCI_DMA_FROMDEVICE, + }, + { /* CX18_ENC_STREAM_TYPE_PCM */ + "encoder PCM audio", + VFL_TYPE_GRABBER, CX18_V4L2_ENC_PCM_OFFSET, + PCI_DMA_FROMDEVICE, + }, + { /* CX18_ENC_STREAM_TYPE_IDX */ + "encoder IDX", + VFL_TYPE_GRABBER, -1, + PCI_DMA_FROMDEVICE, + }, + { /* CX18_ENC_STREAM_TYPE_RAD */ + "encoder radio", + VFL_TYPE_RADIO, 0, + PCI_DMA_NONE, + }, +}; + + +static void cx18_dma_free(struct videobuf_queue *q, + struct cx18_stream *s, struct cx18_videobuf_buffer *buf) +{ + videobuf_waiton(q, &buf->vb, 0, 0); + videobuf_vmalloc_free(&buf->vb); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int cx18_prepare_buffer(struct videobuf_queue *q, + struct cx18_stream *s, + struct cx18_videobuf_buffer *buf, + u32 pixelformat, + unsigned int width, unsigned int height, + enum v4l2_field field) +{ + struct cx18 *cx = s->cx; + int rc = 0; + + /* check settings */ + buf->bytes_used = 0; + + if ((width < 48) || (height < 32)) + return -EINVAL; + + buf->vb.size = (width * height * 2); + if ((buf->vb.baddr != 0) && (buf->vb.bsize < buf->vb.size)) + return -EINVAL; + + /* alloc + fill struct (if changed) */ + if (buf->vb.width != width || buf->vb.height != height || + buf->vb.field != field || s->pixelformat != pixelformat || + buf->tvnorm != cx->std) { + + buf->vb.width = width; + buf->vb.height = height; + buf->vb.field = field; + buf->tvnorm = cx->std; + s->pixelformat = pixelformat; + + /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2))) + UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */ + if (s->pixelformat == V4L2_PIX_FMT_HM12) + s->vb_bytes_per_frame = height * 720 * 3 / 2; + else + s->vb_bytes_per_frame = height * 720 * 2; + cx18_dma_free(q, s, buf); + } + + if ((buf->vb.baddr != 0) && (buf->vb.bsize < buf->vb.size)) + return -EINVAL; + + if (buf->vb.field == 0) + buf->vb.field = V4L2_FIELD_INTERLACED; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + buf->vb.width = width; + buf->vb.height = height; + buf->vb.field = field; + buf->tvnorm = cx->std; + s->pixelformat = pixelformat; + + /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2))) + UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */ + if (s->pixelformat == V4L2_PIX_FMT_HM12) + s->vb_bytes_per_frame = height * 720 * 3 / 2; + else + s->vb_bytes_per_frame = height * 720 * 2; + rc = videobuf_iolock(q, &buf->vb, NULL); + if (rc != 0) + goto fail; + } + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + +fail: + cx18_dma_free(q, s, buf); + return rc; + +} + +/* VB_MIN_BUFSIZE is lcm(1440 * 480, 1440 * 576) + 1440 is a single line of 4:2:2 YUV at 720 luma samples wide +*/ +#define VB_MIN_BUFFERS 32 +#define VB_MIN_BUFSIZE 4147200 + +static int buffer_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx18_stream *s = q->priv_data; + struct cx18 *cx = s->cx; + + *size = 2 * cx->cxhdl.width * cx->cxhdl.height; + if (*count == 0) + *count = VB_MIN_BUFFERS; + + while (*size * *count > VB_MIN_BUFFERS * VB_MIN_BUFSIZE) + (*count)--; + + q->field = V4L2_FIELD_INTERLACED; + q->last = V4L2_FIELD_INTERLACED; + + return 0; +} + +static int buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx18_videobuf_buffer *buf = + container_of(vb, struct cx18_videobuf_buffer, vb); + struct cx18_stream *s = q->priv_data; + struct cx18 *cx = s->cx; + + return cx18_prepare_buffer(q, s, buf, s->pixelformat, + cx->cxhdl.width, cx->cxhdl.height, field); +} + +static void buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct cx18_videobuf_buffer *buf = + container_of(vb, struct cx18_videobuf_buffer, vb); + struct cx18_stream *s = q->priv_data; + + cx18_dma_free(q, s, buf); +} + +static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx18_videobuf_buffer *buf = + container_of(vb, struct cx18_videobuf_buffer, vb); + struct cx18_stream *s = q->priv_data; + + buf->vb.state = VIDEOBUF_QUEUED; + + list_add_tail(&buf->vb.queue, &s->vb_capture); +} + +static struct videobuf_queue_ops cx18_videobuf_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +static void cx18_stream_init(struct cx18 *cx, int type) +{ + struct cx18_stream *s = &cx->streams[type]; + struct video_device *video_dev = s->video_dev; + + /* we need to keep video_dev, so restore it afterwards */ + memset(s, 0, sizeof(*s)); + s->video_dev = video_dev; + + /* initialize cx18_stream fields */ + s->dvb = NULL; + s->cx = cx; + s->type = type; + s->name = cx18_stream_info[type].name; + s->handle = CX18_INVALID_TASK_HANDLE; + + s->dma = cx18_stream_info[type].dma; + s->buffers = cx->stream_buffers[type]; + s->buf_size = cx->stream_buf_size[type]; + INIT_LIST_HEAD(&s->buf_pool); + s->bufs_per_mdl = 1; + s->mdl_size = s->buf_size * s->bufs_per_mdl; + + init_waitqueue_head(&s->waitq); + s->id = -1; + spin_lock_init(&s->q_free.lock); + cx18_queue_init(&s->q_free); + spin_lock_init(&s->q_busy.lock); + cx18_queue_init(&s->q_busy); + spin_lock_init(&s->q_full.lock); + cx18_queue_init(&s->q_full); + spin_lock_init(&s->q_idle.lock); + cx18_queue_init(&s->q_idle); + + INIT_WORK(&s->out_work_order, cx18_out_work_handler); + + INIT_LIST_HEAD(&s->vb_capture); + s->vb_timeout.function = cx18_vb_timeout; + s->vb_timeout.data = (unsigned long)s; + init_timer(&s->vb_timeout); + spin_lock_init(&s->vb_lock); + if (type == CX18_ENC_STREAM_TYPE_YUV) { + spin_lock_init(&s->vbuf_q_lock); + + s->vb_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + videobuf_queue_vmalloc_init(&s->vbuf_q, &cx18_videobuf_qops, + &cx->pci_dev->dev, &s->vbuf_q_lock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx18_videobuf_buffer), + s, &cx->serialize_lock); + + /* Assume the previous pixel default */ + s->pixelformat = V4L2_PIX_FMT_HM12; + s->vb_bytes_per_frame = cx->cxhdl.height * 720 * 3 / 2; + } +} + +static int cx18_prep_dev(struct cx18 *cx, int type) +{ + struct cx18_stream *s = &cx->streams[type]; + u32 cap = cx->v4l2_cap; + int num_offset = cx18_stream_info[type].num_offset; + int num = cx->instance + cx18_first_minor + num_offset; + + /* + * These five fields are always initialized. + * For analog capture related streams, if video_dev == NULL then the + * stream is not in use. + * For the TS stream, if dvb == NULL then the stream is not in use. + * In those cases no other fields but these four can be used. + */ + s->video_dev = NULL; + s->dvb = NULL; + s->cx = cx; + s->type = type; + s->name = cx18_stream_info[type].name; + + /* Check whether the radio is supported */ + if (type == CX18_ENC_STREAM_TYPE_RAD && !(cap & V4L2_CAP_RADIO)) + return 0; + + /* Check whether VBI is supported */ + if (type == CX18_ENC_STREAM_TYPE_VBI && + !(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE))) + return 0; + + /* User explicitly selected 0 buffers for these streams, so don't + create them. */ + if (cx18_stream_info[type].dma != PCI_DMA_NONE && + cx->stream_buffers[type] == 0) { + CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name); + return 0; + } + + cx18_stream_init(cx, type); + + /* Allocate the cx18_dvb struct only for the TS on cards with DTV */ + if (type == CX18_ENC_STREAM_TYPE_TS) { + if (cx->card->hw_all & CX18_HW_DVB) { + s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL); + if (s->dvb == NULL) { + CX18_ERR("Couldn't allocate cx18_dvb structure" + " for %s\n", s->name); + return -ENOMEM; + } + } else { + /* Don't need buffers for the TS, if there is no DVB */ + s->buffers = 0; + } + } + + if (num_offset == -1) + return 0; + + /* allocate and initialize the v4l2 video device structure */ + s->video_dev = video_device_alloc(); + if (s->video_dev == NULL) { + CX18_ERR("Couldn't allocate v4l2 video_device for %s\n", + s->name); + return -ENOMEM; + } + + snprintf(s->video_dev->name, sizeof(s->video_dev->name), "%s %s", + cx->v4l2_dev.name, s->name); + + s->video_dev->num = num; + s->video_dev->v4l2_dev = &cx->v4l2_dev; + s->video_dev->fops = &cx18_v4l2_enc_fops; + s->video_dev->release = video_device_release; + s->video_dev->tvnorms = V4L2_STD_ALL; + s->video_dev->lock = &cx->serialize_lock; + set_bit(V4L2_FL_USE_FH_PRIO, &s->video_dev->flags); + cx18_set_funcs(s->video_dev); + return 0; +} + +/* Initialize v4l2 variables and register v4l2 devices */ +int cx18_streams_setup(struct cx18 *cx) +{ + int type, ret; + + /* Setup V4L2 Devices */ + for (type = 0; type < CX18_MAX_STREAMS; type++) { + /* Prepare device */ + ret = cx18_prep_dev(cx, type); + if (ret < 0) + break; + + /* Allocate Stream */ + ret = cx18_stream_alloc(&cx->streams[type]); + if (ret < 0) + break; + } + if (type == CX18_MAX_STREAMS) + return 0; + + /* One or more streams could not be initialized. Clean 'em all up. */ + cx18_streams_cleanup(cx, 0); + return ret; +} + +static int cx18_reg_dev(struct cx18 *cx, int type) +{ + struct cx18_stream *s = &cx->streams[type]; + int vfl_type = cx18_stream_info[type].vfl_type; + const char *name; + int num, ret; + + if (type == CX18_ENC_STREAM_TYPE_TS && s->dvb != NULL) { + ret = cx18_dvb_register(s); + if (ret < 0) { + CX18_ERR("DVB failed to register\n"); + return ret; + } + } + + if (s->video_dev == NULL) + return 0; + + num = s->video_dev->num; + /* card number + user defined offset + device offset */ + if (type != CX18_ENC_STREAM_TYPE_MPG) { + struct cx18_stream *s_mpg = &cx->streams[CX18_ENC_STREAM_TYPE_MPG]; + + if (s_mpg->video_dev) + num = s_mpg->video_dev->num + + cx18_stream_info[type].num_offset; + } + video_set_drvdata(s->video_dev, s); + + /* Register device. First try the desired minor, then any free one. */ + ret = video_register_device_no_warn(s->video_dev, vfl_type, num); + if (ret < 0) { + CX18_ERR("Couldn't register v4l2 device for %s (device node number %d)\n", + s->name, num); + video_device_release(s->video_dev); + s->video_dev = NULL; + return ret; + } + + name = video_device_node_name(s->video_dev); + + switch (vfl_type) { + case VFL_TYPE_GRABBER: + CX18_INFO("Registered device %s for %s (%d x %d.%02d kB)\n", + name, s->name, cx->stream_buffers[type], + cx->stream_buf_size[type] / 1024, + (cx->stream_buf_size[type] * 100 / 1024) % 100); + break; + + case VFL_TYPE_RADIO: + CX18_INFO("Registered device %s for %s\n", name, s->name); + break; + + case VFL_TYPE_VBI: + if (cx->stream_buffers[type]) + CX18_INFO("Registered device %s for %s " + "(%d x %d bytes)\n", + name, s->name, cx->stream_buffers[type], + cx->stream_buf_size[type]); + else + CX18_INFO("Registered device %s for %s\n", + name, s->name); + break; + } + + return 0; +} + +/* Register v4l2 devices */ +int cx18_streams_register(struct cx18 *cx) +{ + int type; + int err; + int ret = 0; + + /* Register V4L2 devices */ + for (type = 0; type < CX18_MAX_STREAMS; type++) { + err = cx18_reg_dev(cx, type); + if (err && ret == 0) + ret = err; + } + + if (ret == 0) + return 0; + + /* One or more streams could not be initialized. Clean 'em all up. */ + cx18_streams_cleanup(cx, 1); + return ret; +} + +/* Unregister v4l2 devices */ +void cx18_streams_cleanup(struct cx18 *cx, int unregister) +{ + struct video_device *vdev; + int type; + + /* Teardown all streams */ + for (type = 0; type < CX18_MAX_STREAMS; type++) { + + /* The TS has a cx18_dvb structure, not a video_device */ + if (type == CX18_ENC_STREAM_TYPE_TS) { + if (cx->streams[type].dvb != NULL) { + if (unregister) + cx18_dvb_unregister(&cx->streams[type]); + kfree(cx->streams[type].dvb); + cx->streams[type].dvb = NULL; + cx18_stream_free(&cx->streams[type]); + } + continue; + } + + /* No struct video_device, but can have buffers allocated */ + if (type == CX18_ENC_STREAM_TYPE_IDX) { + /* If the module params didn't inhibit IDX ... */ + if (cx->stream_buffers[type] != 0) { + cx->stream_buffers[type] = 0; + /* + * Before calling cx18_stream_free(), + * check if the IDX stream was actually set up. + * Needed, since the cx18_probe() error path + * exits through here as well as normal clean up + */ + if (cx->streams[type].buffers != 0) + cx18_stream_free(&cx->streams[type]); + } + continue; + } + + /* If struct video_device exists, can have buffers allocated */ + vdev = cx->streams[type].video_dev; + + cx->streams[type].video_dev = NULL; + if (vdev == NULL) + continue; + + if (type == CX18_ENC_STREAM_TYPE_YUV) + videobuf_mmap_free(&cx->streams[type].vbuf_q); + + cx18_stream_free(&cx->streams[type]); + + /* Unregister or release device */ + if (unregister) + video_unregister_device(vdev); + else + video_device_release(vdev); + } +} + +static void cx18_vbi_setup(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + int raw = cx18_raw_vbi(cx); + u32 data[CX2341X_MBOX_MAX_DATA]; + int lines; + + if (cx->is_60hz) { + cx->vbi.count = 12; + cx->vbi.start[0] = 10; + cx->vbi.start[1] = 273; + } else { /* PAL/SECAM */ + cx->vbi.count = 18; + cx->vbi.start[0] = 6; + cx->vbi.start[1] = 318; + } + + /* setup VBI registers */ + if (raw) + v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &cx->vbi.in.fmt.vbi); + else + v4l2_subdev_call(cx->sd_av, vbi, s_sliced_fmt, &cx->vbi.in.fmt.sliced); + + /* + * Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw + * VBI when the first analog capture channel starts, as once it starts + * (e.g. MPEG), we can't effect any change in the Encoder Raw VBI setup + * (i.e. for the VBI capture channels). We also send it for each + * analog capture channel anyway just to make sure we get the proper + * behavior + */ + if (raw) { + lines = cx->vbi.count * 2; + } else { + /* + * For 525/60 systems, according to the VIP 2 & BT.656 std: + * The EAV RP code's Field bit toggles on line 4, a few lines + * after the Vertcal Blank bit has already toggled. + * Tell the encoder to capture 21-4+1=18 lines per field, + * since we want lines 10 through 21. + * + * For 625/50 systems, according to the VIP 2 & BT.656 std: + * The EAV RP code's Field bit toggles on line 1, a few lines + * after the Vertcal Blank bit has already toggled. + * (We've actually set the digitizer so that the Field bit + * toggles on line 2.) Tell the encoder to capture 23-2+1=22 + * lines per field, since we want lines 6 through 23. + */ + lines = cx->is_60hz ? (21 - 4 + 1) * 2 : (23 - 2 + 1) * 2; + } + + data[0] = s->handle; + /* Lines per field */ + data[1] = (lines / 2) | ((lines / 2) << 16); + /* bytes per line */ + data[2] = (raw ? vbi_active_samples + : (cx->is_60hz ? vbi_hblank_samples_60Hz + : vbi_hblank_samples_50Hz)); + /* Every X number of frames a VBI interrupt arrives + (frames as in 25 or 30 fps) */ + data[3] = 1; + /* + * Set the SAV/EAV RP codes to look for as start/stop points + * when in VIP-1.1 mode + */ + if (raw) { + /* + * Start codes for beginning of "active" line in vertical blank + * 0x20 ( VerticalBlank ) + * 0x60 ( EvenField VerticalBlank ) + */ + data[4] = 0x20602060; + /* + * End codes for end of "active" raw lines and regular lines + * 0x30 ( VerticalBlank HorizontalBlank) + * 0x70 ( EvenField VerticalBlank HorizontalBlank) + * 0x90 (Task HorizontalBlank) + * 0xd0 (Task EvenField HorizontalBlank) + */ + data[5] = 0x307090d0; + } else { + /* + * End codes for active video, we want data in the hblank region + * 0xb0 (Task 0 VerticalBlank HorizontalBlank) + * 0xf0 (Task EvenField VerticalBlank HorizontalBlank) + * + * Since the V bit is only allowed to toggle in the EAV RP code, + * just before the first active region line, these two + * are problematic: + * 0x90 (Task HorizontalBlank) + * 0xd0 (Task EvenField HorizontalBlank) + * + * We have set the digitzer such that we don't have to worry + * about these problem codes. + */ + data[4] = 0xB0F0B0F0; + /* + * Start codes for beginning of active line in vertical blank + * 0xa0 (Task VerticalBlank ) + * 0xe0 (Task EvenField VerticalBlank ) + */ + data[5] = 0xA0E0A0E0; + } + + CX18_DEBUG_INFO("Setup VBI h: %d lines %x bpl %d fr %d %x %x\n", + data[0], data[1], data[2], data[3], data[4], data[5]); + + cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data); +} + +void cx18_stream_rotate_idx_mdls(struct cx18 *cx) +{ + struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; + struct cx18_mdl *mdl; + + if (!cx18_stream_enabled(s)) + return; + + /* Return if the firmware is not running low on MDLs */ + if ((atomic_read(&s->q_free.depth) + atomic_read(&s->q_busy.depth)) >= + CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN) + return; + + /* Return if there are no MDLs to rotate back to the firmware */ + if (atomic_read(&s->q_full.depth) < 2) + return; + + /* + * Take the oldest IDX MDL still holding data, and discard its index + * entries by scheduling the MDL to go back to the firmware + */ + mdl = cx18_dequeue(s, &s->q_full); + if (mdl != NULL) + cx18_enqueue(s, mdl, &s->q_free); +} + +static +struct cx18_queue *_cx18_stream_put_mdl_fw(struct cx18_stream *s, + struct cx18_mdl *mdl) +{ + struct cx18 *cx = s->cx; + struct cx18_queue *q; + + /* Don't give it to the firmware, if we're not running a capture */ + if (s->handle == CX18_INVALID_TASK_HANDLE || + test_bit(CX18_F_S_STOPPING, &s->s_flags) || + !test_bit(CX18_F_S_STREAMING, &s->s_flags)) + return cx18_enqueue(s, mdl, &s->q_free); + + q = cx18_enqueue(s, mdl, &s->q_busy); + if (q != &s->q_busy) + return q; /* The firmware has the max MDLs it can handle */ + + cx18_mdl_sync_for_device(s, mdl); + cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, + (void __iomem *) &cx->scb->cpu_mdl[mdl->id] - cx->enc_mem, + s->bufs_per_mdl, mdl->id, s->mdl_size); + return q; +} + +static +void _cx18_stream_load_fw_queue(struct cx18_stream *s) +{ + struct cx18_queue *q; + struct cx18_mdl *mdl; + + if (atomic_read(&s->q_free.depth) == 0 || + atomic_read(&s->q_busy.depth) >= CX18_MAX_FW_MDLS_PER_STREAM) + return; + + /* Move from q_free to q_busy notifying the firmware, until the limit */ + do { + mdl = cx18_dequeue(s, &s->q_free); + if (mdl == NULL) + break; + q = _cx18_stream_put_mdl_fw(s, mdl); + } while (atomic_read(&s->q_busy.depth) < CX18_MAX_FW_MDLS_PER_STREAM + && q == &s->q_busy); +} + +void cx18_out_work_handler(struct work_struct *work) +{ + struct cx18_stream *s = + container_of(work, struct cx18_stream, out_work_order); + + _cx18_stream_load_fw_queue(s); +} + +static void cx18_stream_configure_mdls(struct cx18_stream *s) +{ + cx18_unload_queues(s); + + switch (s->type) { + case CX18_ENC_STREAM_TYPE_YUV: + /* + * Height should be a multiple of 32 lines. + * Set the MDL size to the exact size needed for one frame. + * Use enough buffers per MDL to cover the MDL size + */ + if (s->pixelformat == V4L2_PIX_FMT_HM12) + s->mdl_size = 720 * s->cx->cxhdl.height * 3 / 2; + else + s->mdl_size = 720 * s->cx->cxhdl.height * 2; + s->bufs_per_mdl = s->mdl_size / s->buf_size; + if (s->mdl_size % s->buf_size) + s->bufs_per_mdl++; + break; + case CX18_ENC_STREAM_TYPE_VBI: + s->bufs_per_mdl = 1; + if (cx18_raw_vbi(s->cx)) { + s->mdl_size = (s->cx->is_60hz ? 12 : 18) + * 2 * vbi_active_samples; + } else { + /* + * See comment in cx18_vbi_setup() below about the + * extra lines we capture in sliced VBI mode due to + * the lines on which EAV RP codes toggle. + */ + s->mdl_size = s->cx->is_60hz + ? (21 - 4 + 1) * 2 * vbi_hblank_samples_60Hz + : (23 - 2 + 1) * 2 * vbi_hblank_samples_50Hz; + } + break; + default: + s->bufs_per_mdl = 1; + s->mdl_size = s->buf_size * s->bufs_per_mdl; + break; + } + + cx18_load_queues(s); +} + +int cx18_start_v4l2_encode_stream(struct cx18_stream *s) +{ + u32 data[MAX_MB_ARGUMENTS]; + struct cx18 *cx = s->cx; + int captype = 0; + struct cx18_stream *s_idx; + + if (!cx18_stream_enabled(s)) + return -EINVAL; + + CX18_DEBUG_INFO("Start encoder stream %s\n", s->name); + + switch (s->type) { + case CX18_ENC_STREAM_TYPE_MPG: + captype = CAPTURE_CHANNEL_TYPE_MPEG; + cx->mpg_data_received = cx->vbi_data_inserted = 0; + cx->dualwatch_jiffies = jiffies; + cx->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode); + cx->search_pack_header = 0; + break; + + case CX18_ENC_STREAM_TYPE_IDX: + captype = CAPTURE_CHANNEL_TYPE_INDEX; + break; + case CX18_ENC_STREAM_TYPE_TS: + captype = CAPTURE_CHANNEL_TYPE_TS; + break; + case CX18_ENC_STREAM_TYPE_YUV: + captype = CAPTURE_CHANNEL_TYPE_YUV; + break; + case CX18_ENC_STREAM_TYPE_PCM: + captype = CAPTURE_CHANNEL_TYPE_PCM; + break; + case CX18_ENC_STREAM_TYPE_VBI: +#ifdef CX18_ENCODER_PARSES_SLICED + captype = cx18_raw_vbi(cx) ? + CAPTURE_CHANNEL_TYPE_VBI : CAPTURE_CHANNEL_TYPE_SLICED_VBI; +#else + /* + * Currently we set things up so that Sliced VBI from the + * digitizer is handled as Raw VBI by the encoder + */ + captype = CAPTURE_CHANNEL_TYPE_VBI; +#endif + cx->vbi.frame = 0; + cx->vbi.inserted_frame = 0; + memset(cx->vbi.sliced_mpeg_size, + 0, sizeof(cx->vbi.sliced_mpeg_size)); + break; + default: + return -EINVAL; + } + + /* Clear Streamoff flags in case left from last capture */ + clear_bit(CX18_F_S_STREAMOFF, &s->s_flags); + + cx18_vapi_result(cx, data, CX18_CREATE_TASK, 1, CPU_CMD_MASK_CAPTURE); + s->handle = data[0]; + cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); + + /* + * For everything but CAPTURE_CHANNEL_TYPE_TS, play it safe and + * set up all the parameters, as it is not obvious which parameters the + * firmware shares across capture channel types and which it does not. + * + * Some of the cx18_vapi() calls below apply to only certain capture + * channel types. We're hoping there's no harm in calling most of them + * anyway, as long as the values are all consistent. Setting some + * shared parameters will have no effect once an analog capture channel + * has started streaming. + */ + if (captype != CAPTURE_CHANNEL_TYPE_TS) { + cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 8, 0); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 4, 1); + + /* + * Audio related reset according to + * Documentation/video4linux/cx2341x/fw-encoder-api.txt + */ + if (atomic_read(&cx->ana_capturing) == 0) + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, + s->handle, 12); + + /* + * Number of lines for Field 1 & Field 2 according to + * Documentation/video4linux/cx2341x/fw-encoder-api.txt + * Field 1 is 312 for 625 line systems in BT.656 + * Field 2 is 313 for 625 line systems in BT.656 + */ + cx18_vapi(cx, CX18_CPU_SET_CAPTURE_LINE_NO, 3, + s->handle, 312, 313); + + if (cx->v4l2_cap & V4L2_CAP_VBI_CAPTURE) + cx18_vbi_setup(s); + + /* + * Select to receive I, P, and B frame index entries, if the + * index stream is enabled. Otherwise disable index entry + * generation. + */ + s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; + cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 2, + s->handle, cx18_stream_enabled(s_idx) ? 7 : 0); + + /* Call out to the common CX2341x API setup for user controls */ + cx->cxhdl.priv = s; + cx2341x_handler_setup(&cx->cxhdl); + + /* + * When starting a capture and we're set for radio, + * ensure the video is muted, despite the user control. + */ + if (!cx->cxhdl.video_mute && + test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) + cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, + (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute_yuv) << 8) | 1); + + /* Enable the Video Format Converter for UYVY 4:2:2 support, + * rather than the default HM12 Macroblovk 4:2:0 support. + */ + if (captype == CAPTURE_CHANNEL_TYPE_YUV) { + if (s->pixelformat == V4L2_PIX_FMT_UYVY) + cx18_vapi(cx, CX18_CPU_SET_VFC_PARAM, 2, + s->handle, 1); + else + /* If in doubt, default to HM12 */ + cx18_vapi(cx, CX18_CPU_SET_VFC_PARAM, 2, + s->handle, 0); + } + } + + if (atomic_read(&cx->tot_capturing) == 0) { + cx2341x_handler_set_busy(&cx->cxhdl, 1); + clear_bit(CX18_F_I_EOS, &cx->i_flags); + cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK); + } + + cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle, + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); + + /* Init all the cpu_mdls for this stream */ + cx18_stream_configure_mdls(s); + _cx18_stream_load_fw_queue(s); + + /* begin_capture */ + if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { + CX18_DEBUG_WARN("Error starting capture!\n"); + /* Ensure we're really not capturing before releasing MDLs */ + set_bit(CX18_F_S_STOPPING, &s->s_flags); + if (s->type == CX18_ENC_STREAM_TYPE_MPG) + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1); + else + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle); + clear_bit(CX18_F_S_STREAMING, &s->s_flags); + /* FIXME - CX18_F_S_STREAMOFF as well? */ + cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); + cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); + s->handle = CX18_INVALID_TASK_HANDLE; + clear_bit(CX18_F_S_STOPPING, &s->s_flags); + if (atomic_read(&cx->tot_capturing) == 0) { + set_bit(CX18_F_I_EOS, &cx->i_flags); + cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK); + } + return -EINVAL; + } + + /* you're live! sit back and await interrupts :) */ + if (captype != CAPTURE_CHANNEL_TYPE_TS) + atomic_inc(&cx->ana_capturing); + atomic_inc(&cx->tot_capturing); + return 0; +} +EXPORT_SYMBOL(cx18_start_v4l2_encode_stream); + +void cx18_stop_all_captures(struct cx18 *cx) +{ + int i; + + for (i = CX18_MAX_STREAMS - 1; i >= 0; i--) { + struct cx18_stream *s = &cx->streams[i]; + + if (!cx18_stream_enabled(s)) + continue; + if (test_bit(CX18_F_S_STREAMING, &s->s_flags)) + cx18_stop_v4l2_encode_stream(s, 0); + } +} + +int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) +{ + struct cx18 *cx = s->cx; + + if (!cx18_stream_enabled(s)) + return -EINVAL; + + /* This function assumes that you are allowed to stop the capture + and that we are actually capturing */ + + CX18_DEBUG_INFO("Stop Capture\n"); + + if (atomic_read(&cx->tot_capturing) == 0) + return 0; + + set_bit(CX18_F_S_STOPPING, &s->s_flags); + if (s->type == CX18_ENC_STREAM_TYPE_MPG) + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, !gop_end); + else + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle); + + if (s->type == CX18_ENC_STREAM_TYPE_MPG && gop_end) { + CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); + } + + if (s->type != CX18_ENC_STREAM_TYPE_TS) + atomic_dec(&cx->ana_capturing); + atomic_dec(&cx->tot_capturing); + + /* Clear capture and no-read bits */ + clear_bit(CX18_F_S_STREAMING, &s->s_flags); + + /* Tell the CX23418 it can't use our buffers anymore */ + cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); + + cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); + s->handle = CX18_INVALID_TASK_HANDLE; + clear_bit(CX18_F_S_STOPPING, &s->s_flags); + + if (atomic_read(&cx->tot_capturing) > 0) + return 0; + + cx2341x_handler_set_busy(&cx->cxhdl, 0); + cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK); + wake_up(&s->waitq); + + return 0; +} +EXPORT_SYMBOL(cx18_stop_v4l2_encode_stream); + +u32 cx18_find_handle(struct cx18 *cx) +{ + int i; + + /* find first available handle to be used for global settings */ + for (i = 0; i < CX18_MAX_STREAMS; i++) { + struct cx18_stream *s = &cx->streams[i]; + + if (s->video_dev && (s->handle != CX18_INVALID_TASK_HANDLE)) + return s->handle; + } + return CX18_INVALID_TASK_HANDLE; +} + +struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle) +{ + int i; + struct cx18_stream *s; + + if (handle == CX18_INVALID_TASK_HANDLE) + return NULL; + + for (i = 0; i < CX18_MAX_STREAMS; i++) { + s = &cx->streams[i]; + if (s->handle != handle) + continue; + if (cx18_stream_enabled(s)) + return s; + } + return NULL; +} diff --git a/drivers/media/pci/cx18/cx18-streams.h b/drivers/media/pci/cx18/cx18-streams.h new file mode 100644 index 00000000..713b0e61 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-streams.h @@ -0,0 +1,62 @@ +/* + * cx18 init/start/stop/exit stream functions + * + * Derived from ivtv-streams.h + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +u32 cx18_find_handle(struct cx18 *cx); +struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle); +int cx18_streams_setup(struct cx18 *cx); +int cx18_streams_register(struct cx18 *cx); +void cx18_streams_cleanup(struct cx18 *cx, int unregister); + +#define CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN (3) +void cx18_stream_rotate_idx_mdls(struct cx18 *cx); + +static inline bool cx18_stream_enabled(struct cx18_stream *s) +{ + return s->video_dev || + (s->dvb && s->dvb->enabled) || + (s->type == CX18_ENC_STREAM_TYPE_IDX && + s->cx->stream_buffers[CX18_ENC_STREAM_TYPE_IDX] != 0); +} + +/* Related to submission of mdls to firmware */ +static inline void cx18_stream_load_fw_queue(struct cx18_stream *s) +{ + schedule_work(&s->out_work_order); +} + +static inline void cx18_stream_put_mdl_fw(struct cx18_stream *s, + struct cx18_mdl *mdl) +{ + /* Put mdl on q_free; the out work handler will move mdl(s) to q_busy */ + cx18_enqueue(s, mdl, &s->q_free); + cx18_stream_load_fw_queue(s); +} + +void cx18_out_work_handler(struct work_struct *work); + +/* Capture related */ +int cx18_start_v4l2_encode_stream(struct cx18_stream *s); +int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end); + +void cx18_stop_all_captures(struct cx18 *cx); diff --git a/drivers/media/pci/cx18/cx18-vbi.c b/drivers/media/pci/cx18/cx18-vbi.c new file mode 100644 index 00000000..add99642 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-vbi.c @@ -0,0 +1,277 @@ +/* + * cx18 Vertical Blank Interval support functions + * + * Derived from ivtv-vbi.c + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-vbi.h" +#include "cx18-ioctl.h" +#include "cx18-queue.h" + +/* + * Raster Reference/Protection (RP) bytes, used in Start/End Active + * Video codes emitted from the digitzer in VIP 1.x mode, that flag the start + * of VBI sample or VBI ancillary data regions in the digitial ratser line. + * + * Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0 + */ +static const u8 raw_vbi_sav_rp[2] = { 0x20, 0x60 }; /* __V_, _FV_ */ +static const u8 sliced_vbi_eav_rp[2] = { 0xb0, 0xf0 }; /* T_VH, TFVH */ + +static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp) +{ + int line = 0; + int i; + u32 linemask[2] = { 0, 0 }; + unsigned short size; + static const u8 mpeg_hdr_data[] = { + /* MPEG-2 Program Pack */ + 0x00, 0x00, 0x01, 0xba, /* Prog Pack start code */ + 0x44, 0x00, 0x0c, 0x66, 0x24, 0x01, /* SCR, SCR Ext, markers */ + 0x01, 0xd1, 0xd3, /* Mux Rate, markers */ + 0xfa, 0xff, 0xff, /* Res, Suff cnt, Stuff */ + /* MPEG-2 Private Stream 1 PES Packet */ + 0x00, 0x00, 0x01, 0xbd, /* Priv Stream 1 start */ + 0x00, 0x1a, /* length */ + 0x84, 0x80, 0x07, /* flags, hdr data len */ + 0x21, 0x00, 0x5d, 0x63, 0xa7, /* PTS, markers */ + 0xff, 0xff /* stuffing */ + }; + const int sd = sizeof(mpeg_hdr_data); /* start of vbi data */ + int idx = cx->vbi.frame % CX18_VBI_FRAMES; + u8 *dst = &cx->vbi.sliced_mpeg_data[idx][0]; + + for (i = 0; i < lines; i++) { + struct v4l2_sliced_vbi_data *sdata = cx->vbi.sliced_data + i; + int f, l; + + if (sdata->id == 0) + continue; + + l = sdata->line - 6; + f = sdata->field; + if (f) + l += 18; + if (l < 32) + linemask[0] |= (1 << l); + else + linemask[1] |= (1 << (l - 32)); + dst[sd + 12 + line * 43] = cx18_service2vbi(sdata->id); + memcpy(dst + sd + 12 + line * 43 + 1, sdata->data, 42); + line++; + } + memcpy(dst, mpeg_hdr_data, sizeof(mpeg_hdr_data)); + if (line == 36) { + /* All lines are used, so there is no space for the linemask + (the max size of the VBI data is 36 * 43 + 4 bytes). + So in this case we use the magic number 'ITV0'. */ + memcpy(dst + sd, "ITV0", 4); + memmove(dst + sd + 4, dst + sd + 12, line * 43); + size = 4 + ((43 * line + 3) & ~3); + } else { + memcpy(dst + sd, "itv0", 4); + cpu_to_le32s(&linemask[0]); + cpu_to_le32s(&linemask[1]); + memcpy(dst + sd + 4, &linemask[0], 8); + size = 12 + ((43 * line + 3) & ~3); + } + dst[4+16] = (size + 10) >> 8; + dst[5+16] = (size + 10) & 0xff; + dst[9+16] = 0x21 | ((pts_stamp >> 29) & 0x6); + dst[10+16] = (pts_stamp >> 22) & 0xff; + dst[11+16] = 1 | ((pts_stamp >> 14) & 0xff); + dst[12+16] = (pts_stamp >> 7) & 0xff; + dst[13+16] = 1 | ((pts_stamp & 0x7f) << 1); + cx->vbi.sliced_mpeg_size[idx] = sd + size; +} + +/* Compress raw VBI format, removes leading SAV codes and surplus space + after the frame. Returns new compressed size. */ +/* FIXME - this function ignores the input size. */ +static u32 compress_raw_buf(struct cx18 *cx, u8 *buf, u32 size, u32 hdr_size) +{ + u32 line_size = vbi_active_samples; + u32 lines = cx->vbi.count * 2; + u8 *q = buf; + u8 *p; + int i; + + /* Skip the header */ + buf += hdr_size; + + for (i = 0; i < lines; i++) { + p = buf + i * line_size; + + /* Look for SAV code */ + if (p[0] != 0xff || p[1] || p[2] || + (p[3] != raw_vbi_sav_rp[0] && + p[3] != raw_vbi_sav_rp[1])) + break; + if (i == lines - 1) { + /* last line is hdr_size bytes short - extrapolate it */ + memcpy(q, p + 4, line_size - 4 - hdr_size); + q += line_size - 4 - hdr_size; + p += line_size - hdr_size - 1; + memset(q, (int) *p, hdr_size); + } else { + memcpy(q, p + 4, line_size - 4); + q += line_size - 4; + } + } + return lines * (line_size - 4); +} + +static u32 compress_sliced_buf(struct cx18 *cx, u8 *buf, u32 size, + const u32 hdr_size) +{ + struct v4l2_decode_vbi_line vbi; + int i; + u32 line = 0; + u32 line_size = cx->is_60hz ? vbi_hblank_samples_60Hz + : vbi_hblank_samples_50Hz; + + /* find the first valid line */ + for (i = hdr_size, buf += hdr_size; i < size; i++, buf++) { + if (buf[0] == 0xff && !buf[1] && !buf[2] && + (buf[3] == sliced_vbi_eav_rp[0] || + buf[3] == sliced_vbi_eav_rp[1])) + break; + } + + /* + * The last line is short by hdr_size bytes, but for the remaining + * checks against size, we pretend that it is not, by counting the + * header bytes we knowingly skipped + */ + size -= (i - hdr_size); + if (size < line_size) + return line; + + for (i = 0; i < size / line_size; i++) { + u8 *p = buf + i * line_size; + + /* Look for EAV code */ + if (p[0] != 0xff || p[1] || p[2] || + (p[3] != sliced_vbi_eav_rp[0] && + p[3] != sliced_vbi_eav_rp[1])) + continue; + vbi.p = p + 4; + v4l2_subdev_call(cx->sd_av, vbi, decode_vbi_line, &vbi); + if (vbi.type) { + cx->vbi.sliced_data[line].id = vbi.type; + cx->vbi.sliced_data[line].field = vbi.is_second_field; + cx->vbi.sliced_data[line].line = vbi.line; + memcpy(cx->vbi.sliced_data[line].data, vbi.p, 42); + line++; + } + } + return line; +} + +static void _cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf) +{ + /* + * The CX23418 provides a 12 byte header in its raw VBI buffers to us: + * 0x3fffffff [4 bytes of something] [4 byte presentation time stamp] + */ + struct vbi_data_hdr { + __be32 magic; + __be32 unknown; + __be32 pts; + } *hdr = (struct vbi_data_hdr *) buf->buf; + + u8 *p = (u8 *) buf->buf; + u32 size = buf->bytesused; + u32 pts; + int lines; + + /* + * The CX23418 sends us data that is 32 bit little-endian swapped, + * but we want the raw VBI bytes in the order they were in the raster + * line. This has a side effect of making the header big endian + */ + cx18_buf_swap(buf); + + /* Raw VBI data */ + if (cx18_raw_vbi(cx)) { + + size = buf->bytesused = + compress_raw_buf(cx, p, size, sizeof(struct vbi_data_hdr)); + + /* + * Hack needed for compatibility with old VBI software. + * Write the frame # at the last 4 bytes of the frame + */ + p += size - 4; + memcpy(p, &cx->vbi.frame, 4); + cx->vbi.frame++; + return; + } + + /* Sliced VBI data with data insertion */ + + pts = (be32_to_cpu(hdr->magic) == 0x3fffffff) ? be32_to_cpu(hdr->pts) + : 0; + + lines = compress_sliced_buf(cx, p, size, sizeof(struct vbi_data_hdr)); + + /* always return at least one empty line */ + if (lines == 0) { + cx->vbi.sliced_data[0].id = 0; + cx->vbi.sliced_data[0].line = 0; + cx->vbi.sliced_data[0].field = 0; + lines = 1; + } + buf->bytesused = size = lines * sizeof(cx->vbi.sliced_data[0]); + memcpy(p, &cx->vbi.sliced_data[0], size); + + if (cx->vbi.insert_mpeg) + copy_vbi_data(cx, lines, pts); + cx->vbi.frame++; +} + +void cx18_process_vbi_data(struct cx18 *cx, struct cx18_mdl *mdl, + int streamtype) +{ + struct cx18_buffer *buf; + u32 orig_used; + + if (streamtype != CX18_ENC_STREAM_TYPE_VBI) + return; + + /* + * Big assumption here: + * Every buffer hooked to the MDL's buf_list is a complete VBI frame + * that ends at the end of the buffer. + * + * To assume anything else would make the code in this file + * more complex, or require extra memcpy()'s to make the + * buffers satisfy the above assumption. It's just simpler to set + * up the encoder buffer transfers to make the assumption true. + */ + list_for_each_entry(buf, &mdl->buf_list, list) { + orig_used = buf->bytesused; + if (orig_used == 0) + break; + _cx18_process_vbi_data(cx, buf); + mdl->bytesused -= (orig_used - buf->bytesused); + } +} diff --git a/drivers/media/pci/cx18/cx18-vbi.h b/drivers/media/pci/cx18/cx18-vbi.h new file mode 100644 index 00000000..b365cf4b --- /dev/null +++ b/drivers/media/pci/cx18/cx18-vbi.h @@ -0,0 +1,26 @@ +/* + * cx18 Vertical Blank Interval support functions + * + * Derived from ivtv-vbi.h + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +void cx18_process_vbi_data(struct cx18 *cx, struct cx18_mdl *mdl, + int streamtype); +int cx18_used_line(struct cx18 *cx, int line, int field); diff --git a/drivers/media/pci/cx18/cx18-version.h b/drivers/media/pci/cx18/cx18-version.h new file mode 100644 index 00000000..fed48b6b --- /dev/null +++ b/drivers/media/pci/cx18/cx18-version.h @@ -0,0 +1,28 @@ +/* + * cx18 driver version information + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_VERSION_H +#define CX18_VERSION_H + +#define CX18_DRIVER_NAME "cx18" +#define CX18_VERSION "1.5.1" + +#endif diff --git a/drivers/media/pci/cx18/cx18-video.c b/drivers/media/pci/cx18/cx18-video.c new file mode 100644 index 00000000..6dc84aac --- /dev/null +++ b/drivers/media/pci/cx18/cx18-video.c @@ -0,0 +1,32 @@ +/* + * cx18 video interface functions + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-video.h" +#include "cx18-cards.h" + +void cx18_video_set_io(struct cx18 *cx) +{ + int inp = cx->active_input; + + v4l2_subdev_call(cx->sd_av, video, s_routing, + cx->card->video_inputs[inp].video_input, 0, 0); +} diff --git a/drivers/media/pci/cx18/cx18-video.h b/drivers/media/pci/cx18/cx18-video.h new file mode 100644 index 00000000..529006a0 --- /dev/null +++ b/drivers/media/pci/cx18/cx18-video.h @@ -0,0 +1,22 @@ +/* + * cx18 video interface functions + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +void cx18_video_set_io(struct cx18 *cx); diff --git a/drivers/media/pci/cx18/cx23418.h b/drivers/media/pci/cx18/cx23418.h new file mode 100644 index 00000000..767a8d23 --- /dev/null +++ b/drivers/media/pci/cx18/cx23418.h @@ -0,0 +1,492 @@ +/* + * cx18 header containing common defines. + * + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX23418_H +#define CX23418_H + +#include + +#define MGR_CMD_MASK 0x40000000 +/* The MSB of the command code indicates that this is the completion of a + command */ +#define MGR_CMD_MASK_ACK (MGR_CMD_MASK | 0x80000000) + +/* Description: This command creates a new instance of a certain task + IN[0] - Task ID. This is one of the XPU_CMD_MASK_YYY where XPU is + the processor on which the task YYY will be created + OUT[0] - Task handle. This handle is passed along with commands to + dispatch to the right instance of the task + ReturnCode - One of the ERR_SYS_... */ +#define CX18_CREATE_TASK (MGR_CMD_MASK | 0x0001) + +/* Description: This command destroys an instance of a task + IN[0] - Task handle. Hanlde of the task to destroy + ReturnCode - One of the ERR_SYS_... */ +#define CX18_DESTROY_TASK (MGR_CMD_MASK | 0x0002) + +/* All commands for CPU have the following mask set */ +#define CPU_CMD_MASK 0x20000000 +#define CPU_CMD_MASK_DEBUG (CPU_CMD_MASK | 0x00000000) +#define CPU_CMD_MASK_ACK (CPU_CMD_MASK | 0x80000000) +#define CPU_CMD_MASK_CAPTURE (CPU_CMD_MASK | 0x00020000) +#define CPU_CMD_MASK_TS (CPU_CMD_MASK | 0x00040000) + +#define EPU_CMD_MASK 0x02000000 +#define EPU_CMD_MASK_DEBUG (EPU_CMD_MASK | 0x000000) +#define EPU_CMD_MASK_DE (EPU_CMD_MASK | 0x040000) + +#define APU_CMD_MASK 0x10000000 +#define APU_CMD_MASK_ACK (APU_CMD_MASK | 0x80000000) + +#define CX18_APU_ENCODING_METHOD_MPEG (0 << 28) +#define CX18_APU_ENCODING_METHOD_AC3 (1 << 28) + +/* Description: Command APU to start audio + IN[0] - audio parameters (same as CX18_CPU_SET_AUDIO_PARAMETERS?) + IN[1] - caller buffer address, or 0 + ReturnCode - ??? */ +#define CX18_APU_START (APU_CMD_MASK | 0x01) + +/* Description: Command APU to stop audio + IN[0] - encoding method to stop + ReturnCode - ??? */ +#define CX18_APU_STOP (APU_CMD_MASK | 0x02) + +/* Description: Command APU to reset the AI + ReturnCode - ??? */ +#define CX18_APU_RESETAI (APU_CMD_MASK | 0x05) + +/* Description: This command indicates that a Memory Descriptor List has been + filled with the requested channel type + IN[0] - Task handle. Handle of the task + IN[1] - Offset of the MDL_ACK from the beginning of the local DDR. + IN[2] - Number of CNXT_MDL_ACK structures in the array pointed to by IN[1] + ReturnCode - One of the ERR_DE_... */ +#define CX18_EPU_DMA_DONE (EPU_CMD_MASK_DE | 0x0001) + +/* Something interesting happened + IN[0] - A value to log + IN[1] - An offset of a string in the MiniMe memory; + 0/zero/NULL means "I have nothing to say" */ +#define CX18_EPU_DEBUG (EPU_CMD_MASK_DEBUG | 0x0003) + +/* Reads memory/registers (32-bit) + IN[0] - Address + OUT[1] - Value */ +#define CX18_CPU_DEBUG_PEEK32 (CPU_CMD_MASK_DEBUG | 0x0003) + +/* Description: This command starts streaming with the set channel type + IN[0] - Task handle. Handle of the task to start + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_CAPTURE_START (CPU_CMD_MASK_CAPTURE | 0x0002) + +/* Description: This command stops streaming with the set channel type + IN[0] - Task handle. Handle of the task to stop + IN[1] - 0 = stop at end of GOP, 1 = stop at end of frame (MPEG only) + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_CAPTURE_STOP (CPU_CMD_MASK_CAPTURE | 0x0003) + +/* Description: This command pauses streaming with the set channel type + IN[0] - Task handle. Handle of the task to pause + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_CAPTURE_PAUSE (CPU_CMD_MASK_CAPTURE | 0x0007) + +/* Description: This command resumes streaming with the set channel type + IN[0] - Task handle. Handle of the task to resume + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_CAPTURE_RESUME (CPU_CMD_MASK_CAPTURE | 0x0008) + +#define CAPTURE_CHANNEL_TYPE_NONE 0 +#define CAPTURE_CHANNEL_TYPE_MPEG 1 +#define CAPTURE_CHANNEL_TYPE_INDEX 2 +#define CAPTURE_CHANNEL_TYPE_YUV 3 +#define CAPTURE_CHANNEL_TYPE_PCM 4 +#define CAPTURE_CHANNEL_TYPE_VBI 5 +#define CAPTURE_CHANNEL_TYPE_SLICED_VBI 6 +#define CAPTURE_CHANNEL_TYPE_TS 7 +#define CAPTURE_CHANNEL_TYPE_MAX 15 + +/* Description: This command sets the channel type. This can only be done + when stopped. + IN[0] - Task handle. Handle of the task to start + IN[1] - Channel Type. See Below. + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_CHANNEL_TYPE (CPU_CMD_MASK_CAPTURE + 1) + +/* Description: Set stream output type + IN[0] - task handle. Handle of the task to start + IN[1] - type + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_STREAM_OUTPUT_TYPE (CPU_CMD_MASK_CAPTURE | 0x0012) + +/* Description: Set video input resolution and frame rate + IN[0] - task handle + IN[1] - reserved + IN[2] - reserved + IN[3] - reserved + IN[4] - reserved + IN[5] - frame rate, 0 - 29.97f/s, 1 - 25f/s + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_IN (CPU_CMD_MASK_CAPTURE | 0x0004) + +/* Description: Set video frame rate + IN[0] - task handle. Handle of the task to start + IN[1] - video bit rate mode + IN[2] - video average rate + IN[3] - video peak rate + IN[4] - system mux rate + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_RATE (CPU_CMD_MASK_CAPTURE | 0x0005) + +/* Description: Set video output resolution + IN[0] - task handle + IN[1] - horizontal size + IN[2] - vertical size + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_RESOLUTION (CPU_CMD_MASK_CAPTURE | 0x0006) + +/* Description: This command set filter parameters + IN[0] - Task handle. Handle of the task + IN[1] - type, 0 - temporal, 1 - spatial, 2 - median + IN[2] - mode, temporal/spatial: 0 - disable, 1 - static, 2 - dynamic + median: 0 = disable, 1 = horizontal, 2 = vertical, + 3 = horizontal/vertical, 4 = diagonal + IN[3] - strength, temporal 0 - 31, spatial 0 - 15 + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_FILTER_PARAM (CPU_CMD_MASK_CAPTURE | 0x0009) + +/* Description: This command set spatial filter type + IN[0] - Task handle. + IN[1] - luma type: 0 = disable, 1 = 1D horizontal only, 2 = 1D vertical only, + 3 = 2D H/V separable, 4 = 2D symmetric non-separable + IN[2] - chroma type: 0 - disable, 1 = 1D horizontal + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_SPATIAL_FILTER_TYPE (CPU_CMD_MASK_CAPTURE | 0x000C) + +/* Description: This command set coring levels for median filter + IN[0] - Task handle. + IN[1] - luma_high + IN[2] - luma_low + IN[3] - chroma_high + IN[4] - chroma_low + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_MEDIAN_CORING (CPU_CMD_MASK_CAPTURE | 0x000E) + +/* Description: This command set the picture type mask for index file + IN[0] - Task handle (ignored by firmware) + IN[1] - 0 = disable index file output + 1 = output I picture + 2 = P picture + 4 = B picture + other = illegal */ +#define CX18_CPU_SET_INDEXTABLE (CPU_CMD_MASK_CAPTURE | 0x0010) + +/* Description: Set audio parameters + IN[0] - task handle. Handle of the task to start + IN[1] - audio parameter + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_AUDIO_PARAMETERS (CPU_CMD_MASK_CAPTURE | 0x0011) + +/* Description: Set video mute + IN[0] - task handle. Handle of the task to start + IN[1] - bit31-24: muteYvalue + bit23-16: muteUvalue + bit15-8: muteVvalue + bit0: 1:mute, 0: unmute + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_MUTE (CPU_CMD_MASK_CAPTURE | 0x0013) + +/* Description: Set audio mute + IN[0] - task handle. Handle of the task to start + IN[1] - mute/unmute + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_AUDIO_MUTE (CPU_CMD_MASK_CAPTURE | 0x0014) + +/* Description: Set stream output type + IN[0] - task handle. Handle of the task to start + IN[1] - subType + SET_INITIAL_SCR 1 + SET_QUALITY_MODE 2 + SET_VIM_PROTECT_MODE 3 + SET_PTS_CORRECTION 4 + SET_USB_FLUSH_MODE 5 + SET_MERAQPAR_ENABLE 6 + SET_NAV_PACK_INSERTION 7 + SET_SCENE_CHANGE_ENABLE 8 + IN[2] - parameter 1 + IN[3] - parameter 2 + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_MISC_PARAMETERS (CPU_CMD_MASK_CAPTURE | 0x0015) + +/* Description: Set raw VBI parameters + IN[0] - Task handle + IN[1] - No. of input lines per field: + bit[15:0]: field 1, + bit[31:16]: field 2 + IN[2] - No. of input bytes per line + IN[3] - No. of output frames per transfer + IN[4] - start code + IN[5] - stop code + ReturnCode */ +#define CX18_CPU_SET_RAW_VBI_PARAM (CPU_CMD_MASK_CAPTURE | 0x0016) + +/* Description: Set capture line No. + IN[0] - task handle. Handle of the task to start + IN[1] - height1 + IN[2] - height2 + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_CAPTURE_LINE_NO (CPU_CMD_MASK_CAPTURE | 0x0017) + +/* Description: Set copyright + IN[0] - task handle. Handle of the task to start + IN[1] - copyright + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_COPYRIGHT (CPU_CMD_MASK_CAPTURE | 0x0018) + +/* Description: Set audio PID + IN[0] - task handle. Handle of the task to start + IN[1] - PID + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_AUDIO_PID (CPU_CMD_MASK_CAPTURE | 0x0019) + +/* Description: Set video PID + IN[0] - task handle. Handle of the task to start + IN[1] - PID + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_PID (CPU_CMD_MASK_CAPTURE | 0x001A) + +/* Description: Set Vertical Crop Line + IN[0] - task handle. Handle of the task to start + IN[1] - Line + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VER_CROP_LINE (CPU_CMD_MASK_CAPTURE | 0x001B) + +/* Description: Set COP structure + IN[0] - task handle. Handle of the task to start + IN[1] - M + IN[2] - N + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_GOP_STRUCTURE (CPU_CMD_MASK_CAPTURE | 0x001C) + +/* Description: Set Scene Change Detection + IN[0] - task handle. Handle of the task to start + IN[1] - scene change + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_SCENE_CHANGE_DETECTION (CPU_CMD_MASK_CAPTURE | 0x001D) + +/* Description: Set Aspect Ratio + IN[0] - task handle. Handle of the task to start + IN[1] - AspectRatio + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_ASPECT_RATIO (CPU_CMD_MASK_CAPTURE | 0x001E) + +/* Description: Set Skip Input Frame + IN[0] - task handle. Handle of the task to start + IN[1] - skip input frames + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_SKIP_INPUT_FRAME (CPU_CMD_MASK_CAPTURE | 0x001F) + +/* Description: Set sliced VBI parameters - + Note This API will only apply to MPEG and Sliced VBI Channels + IN[0] - Task handle + IN[1] - output type, 0 - CC, 1 - Moji, 2 - Teletext + IN[2] - start / stop line + bit[15:0] start line number + bit[31:16] stop line number + IN[3] - number of output frames per interrupt + IN[4] - VBI insertion mode + bit 0: output user data, 1 - enable + bit 1: output private stream, 1 - enable + bit 2: mux option, 0 - in GOP, 1 - in picture + bit[7:0] private stream ID + IN[5] - insertion period while mux option is in picture + ReturnCode - VBI data offset */ +#define CX18_CPU_SET_SLICED_VBI_PARAM (CPU_CMD_MASK_CAPTURE | 0x0020) + +/* Description: Set the user data place holder + IN[0] - type of data (0 for user) + IN[1] - Stuffing period + IN[2] - ID data size in word (less than 10) + IN[3] - Pointer to ID buffer */ +#define CX18_CPU_SET_USERDATA_PLACE_HOLDER (CPU_CMD_MASK_CAPTURE | 0x0021) + + +/* Description: + In[0] Task Handle + return parameter: + Out[0] Reserved + Out[1] Video PTS bit[32:2] of last output video frame. + Out[2] Video PTS bit[ 1:0] of last output video frame. + Out[3] Hardware Video PTS counter bit[31:0], + these bits get incremented on every 90kHz clock tick. + Out[4] Hardware Video PTS counter bit32, + these bits get incremented on every 90kHz clock tick. + ReturnCode */ +#define CX18_CPU_GET_ENC_PTS (CPU_CMD_MASK_CAPTURE | 0x0022) + +/* Description: Set VFC parameters + IN[0] - task handle + IN[1] - VFC enable flag, 1 - enable, 0 - disable +*/ +#define CX18_CPU_SET_VFC_PARAM (CPU_CMD_MASK_CAPTURE | 0x0023) + +/* Below is the list of commands related to the data exchange */ +#define CPU_CMD_MASK_DE (CPU_CMD_MASK | 0x040000) + +/* Description: This command provides the physical base address of the local + DDR as viewed by EPU + IN[0] - Physical offset where EPU has the local DDR mapped + ReturnCode - One of the ERR_DE_... */ +#define CPU_CMD_DE_SetBase (CPU_CMD_MASK_DE | 0x0001) + +/* Description: This command provides the offsets in the device memory where + the 2 cx18_mdl_ack blocks reside + IN[0] - Task handle. Handle of the task to start + IN[1] - Offset of the first cx18_mdl_ack from the beginning of the + local DDR. + IN[2] - Offset of the second cx18_mdl_ack from the beginning of the + local DDR. + ReturnCode - One of the ERR_DE_... */ +#define CX18_CPU_DE_SET_MDL_ACK (CPU_CMD_MASK_DE | 0x0002) + +/* Description: This command provides the offset to a Memory Descriptor List + IN[0] - Task handle. Handle of the task to start + IN[1] - Offset of the MDL from the beginning of the local DDR. + IN[2] - Number of cx18_mdl_ent structures in the array pointed to by IN[1] + IN[3] - Buffer ID + IN[4] - Total buffer length + ReturnCode - One of the ERR_DE_... */ +#define CX18_CPU_DE_SET_MDL (CPU_CMD_MASK_DE | 0x0005) + +/* Description: This command requests return of all current Memory + Descriptor Lists to the driver + IN[0] - Task handle. Handle of the task to start + ReturnCode - One of the ERR_DE_... */ +#define CX18_CPU_DE_RELEASE_MDL (CPU_CMD_MASK_DE | 0x0006) + +/* Description: This command signals the cpu that the dat buffer has been + consumed and ready for re-use. + IN[0] - Task handle. Handle of the task + IN[1] - Offset of the data block from the beginning of the local DDR. + IN[2] - Number of bytes in the data block + ReturnCode - One of the ERR_DE_... */ +/* #define CX18_CPU_DE_RELEASE_BUFFER (CPU_CMD_MASK_DE | 0x0007) */ + +/* No Error / Success */ +#define CNXT_OK 0x000000 + +/* Received unknown command */ +#define CXERR_UNK_CMD 0x000001 + +/* First parameter in the command is invalid */ +#define CXERR_INVALID_PARAM1 0x000002 + +/* Second parameter in the command is invalid */ +#define CXERR_INVALID_PARAM2 0x000003 + +/* Device interface is not open/found */ +#define CXERR_DEV_NOT_FOUND 0x000004 + +/* Requested function is not implemented/available */ +#define CXERR_NOTSUPPORTED 0x000005 + +/* Invalid pointer is provided */ +#define CXERR_BADPTR 0x000006 + +/* Unable to allocate memory */ +#define CXERR_NOMEM 0x000007 + +/* Object/Link not found */ +#define CXERR_LINK 0x000008 + +/* Device busy, command cannot be executed */ +#define CXERR_BUSY 0x000009 + +/* File/device/handle is not open. */ +#define CXERR_NOT_OPEN 0x00000A + +/* Value is out of range */ +#define CXERR_OUTOFRANGE 0x00000B + +/* Buffer overflow */ +#define CXERR_OVERFLOW 0x00000C + +/* Version mismatch */ +#define CXERR_BADVER 0x00000D + +/* Operation timed out */ +#define CXERR_TIMEOUT 0x00000E + +/* Operation aborted */ +#define CXERR_ABORT 0x00000F + +/* Specified I2C device not found for read/write */ +#define CXERR_I2CDEV_NOTFOUND 0x000010 + +/* Error in I2C data xfer (but I2C device is present) */ +#define CXERR_I2CDEV_XFERERR 0x000011 + +/* Chanel changing component not ready */ +#define CXERR_CHANNELNOTREADY 0x000012 + +/* PPU (Presensation/Decoder) mail box is corrupted */ +#define CXERR_PPU_MB_CORRUPT 0x000013 + +/* CPU (Capture/Encoder) mail box is corrupted */ +#define CXERR_CPU_MB_CORRUPT 0x000014 + +/* APU (Audio) mail box is corrupted */ +#define CXERR_APU_MB_CORRUPT 0x000015 + +/* Unable to open file for reading */ +#define CXERR_FILE_OPEN_READ 0x000016 + +/* Unable to open file for writing */ +#define CXERR_FILE_OPEN_WRITE 0x000017 + +/* Unable to find the I2C section specified */ +#define CXERR_I2C_BADSECTION 0x000018 + +/* Error in I2C data xfer (but I2C device is present) */ +#define CXERR_I2CDEV_DATALOW 0x000019 + +/* Error in I2C data xfer (but I2C device is present) */ +#define CXERR_I2CDEV_CLOCKLOW 0x00001A + +/* No Interrupt received from HW (for I2C access) */ +#define CXERR_NO_HW_I2C_INTR 0x00001B + +/* RPU is not ready to accept commands! */ +#define CXERR_RPU_NOT_READY 0x00001C + +/* RPU is not ready to accept commands! */ +#define CXERR_RPU_NO_ACK 0x00001D + +/* The are no buffers ready. Try again soon! */ +#define CXERR_NODATA_AGAIN 0x00001E + +/* The stream is stopping. Function not allowed now! */ +#define CXERR_STOPPING_STATUS 0x00001F + +/* Trying to access hardware when the power is turned OFF */ +#define CXERR_DEVPOWER_OFF 0x000020 + +#endif /* CX23418_H */ diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig new file mode 100644 index 00000000..b3688aa8 --- /dev/null +++ b/drivers/media/pci/cx23885/Kconfig @@ -0,0 +1,53 @@ +config VIDEO_CX23885 + tristate "Conexant cx23885 (2388x successor) support" + depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND + select SND_PCM + select I2C_ALGOBIT + select VIDEO_BTCX + select VIDEO_TUNER + select VIDEO_TVEEPROM + depends on RC_CORE + select VIDEOBUF_DVB + select VIDEOBUF_DMA_SG + select VIDEO_CX25840 + select VIDEO_CX2341X + select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT + select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT + select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This is a video4linux driver for Conexant 23885 based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called cx23885 + +config MEDIA_ALTERA_CI + tristate "Altera FPGA based CI module" + depends on VIDEO_CX23885 && DVB_CORE + select ALTERA_STAPL + ---help--- + An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. + + To compile this driver as a module, choose M here: the + module will be called altera-ci diff --git a/drivers/media/pci/cx23885/Makefile b/drivers/media/pci/cx23885/Makefile new file mode 100644 index 00000000..2a2cafb8 --- /dev/null +++ b/drivers/media/pci/cx23885/Makefile @@ -0,0 +1,16 @@ +cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \ + cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \ + cx23885-ioctl.o cx23885-ir.o cx23885-av.o cx23885-input.o \ + cx23888-ir.o netup-init.o cimax2.o netup-eeprom.o \ + cx23885-f300.o cx23885-alsa.o + +obj-$(CONFIG_VIDEO_CX23885) += cx23885.o +obj-$(CONFIG_MEDIA_ALTERA_CI) += altera-ci.o + +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/common +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends + +ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/pci/cx23885/altera-ci.c b/drivers/media/pci/cx23885/altera-ci.c new file mode 100644 index 00000000..2926f7fa --- /dev/null +++ b/drivers/media/pci/cx23885/altera-ci.c @@ -0,0 +1,840 @@ +/* + * altera-ci.c + * + * CI driver in conjunction with NetUp Dual DVB-T/C RF CI card + * + * Copyright (C) 2010,2011 NetUP Inc. + * Copyright (C) 2010,2011 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * currently cx23885 GPIO's used. + * GPIO-0 ~INT in + * GPIO-1 TMS out + * GPIO-2 ~reset chips out + * GPIO-3 to GPIO-10 data/addr for CA in/out + * GPIO-11 ~CS out + * GPIO-12 AD_RG out + * GPIO-13 ~WR out + * GPIO-14 ~RD out + * GPIO-15 ~RDY in + * GPIO-16 TCK out + * GPIO-17 TDO in + * GPIO-18 TDI out + */ +/* + * Bit definitions for MC417_RWD and MC417_OEN registers + * bits 31-16 + * +-----------+ + * | Reserved | + * +-----------+ + * bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | TDI | TDO | TCK | RDY# | #RD | #WR | AD_RG | #CS | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | DATA7| DATA6| DATA5| DATA4| DATA3| DATA2| DATA1| DATA0| + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +#include +#include +#include "altera-ci.h" +#include "dvb_ca_en50221.h" + +/* FPGA regs */ +#define NETUP_CI_INT_CTRL 0x00 +#define NETUP_CI_BUSCTRL2 0x01 +#define NETUP_CI_ADDR0 0x04 +#define NETUP_CI_ADDR1 0x05 +#define NETUP_CI_DATA 0x06 +#define NETUP_CI_BUSCTRL 0x07 +#define NETUP_CI_PID_ADDR0 0x08 +#define NETUP_CI_PID_ADDR1 0x09 +#define NETUP_CI_PID_DATA 0x0a +#define NETUP_CI_TSA_DIV 0x0c +#define NETUP_CI_TSB_DIV 0x0d +#define NETUP_CI_REVISION 0x0f + +/* const for ci op */ +#define NETUP_CI_FLG_CTL 1 +#define NETUP_CI_FLG_RD 1 +#define NETUP_CI_FLG_AD 1 + +static unsigned int ci_dbg; +module_param(ci_dbg, int, 0644); +MODULE_PARM_DESC(ci_dbg, "Enable CI debugging"); + +static unsigned int pid_dbg; +module_param(pid_dbg, int, 0644); +MODULE_PARM_DESC(pid_dbg, "Enable PID filtering debugging"); + +MODULE_DESCRIPTION("altera FPGA CI module"); +MODULE_AUTHOR("Igor M. Liplianin "); +MODULE_LICENSE("GPL"); + +#define ci_dbg_print(args...) \ + do { \ + if (ci_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +#define pid_dbg_print(args...) \ + do { \ + if (pid_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +struct altera_ci_state; +struct netup_hw_pid_filter; + +struct fpga_internal { + void *dev; + struct mutex fpga_mutex;/* two CI's on the same fpga */ + struct netup_hw_pid_filter *pid_filt[2]; + struct altera_ci_state *state[2]; + struct work_struct work; + int (*fpga_rw) (void *dev, int flag, int data, int rw); + int cis_used; + int filts_used; + int strt_wrk; +}; + +/* stores all private variables for communication with CI */ +struct altera_ci_state { + struct fpga_internal *internal; + struct dvb_ca_en50221 ca; + int status; + int nr; +}; + +/* stores all private variables for hardware pid filtering */ +struct netup_hw_pid_filter { + struct fpga_internal *internal; + struct dvb_demux *demux; + /* save old functions */ + int (*start_feed)(struct dvb_demux_feed *feed); + int (*stop_feed)(struct dvb_demux_feed *feed); + + int status; + int nr; +}; + +/* internal params node */ +struct fpga_inode { + /* pointer for internal params, one for each pair of CI's */ + struct fpga_internal *internal; + struct fpga_inode *next_inode; +}; + +/* first internal params */ +static struct fpga_inode *fpga_first_inode; + +/* find chip by dev */ +static struct fpga_inode *find_inode(void *dev) +{ + struct fpga_inode *temp_chip = fpga_first_inode; + + if (temp_chip == NULL) + return temp_chip; + + /* + Search for the last fpga CI chip or + find it by dev */ + while ((temp_chip != NULL) && + (temp_chip->internal->dev != dev)) + temp_chip = temp_chip->next_inode; + + return temp_chip; +} +/* check demux */ +static struct fpga_internal *check_filter(struct fpga_internal *temp_int, + void *demux_dev, int filt_nr) +{ + if (temp_int == NULL) + return NULL; + + if ((temp_int->pid_filt[filt_nr]) == NULL) + return NULL; + + if (temp_int->pid_filt[filt_nr]->demux == demux_dev) + return temp_int; + + return NULL; +} + +/* find chip by demux */ +static struct fpga_inode *find_dinode(void *demux_dev) +{ + struct fpga_inode *temp_chip = fpga_first_inode; + struct fpga_internal *temp_int; + + /* + * Search of the last fpga CI chip or + * find it by demux + */ + while (temp_chip != NULL) { + if (temp_chip->internal != NULL) { + temp_int = temp_chip->internal; + if (check_filter(temp_int, demux_dev, 0)) + break; + if (check_filter(temp_int, demux_dev, 1)) + break; + } + + temp_chip = temp_chip->next_inode; + } + + return temp_chip; +} + +/* deallocating chip */ +static void remove_inode(struct fpga_internal *internal) +{ + struct fpga_inode *prev_node = fpga_first_inode; + struct fpga_inode *del_node = find_inode(internal->dev); + + if (del_node != NULL) { + if (del_node == fpga_first_inode) { + fpga_first_inode = del_node->next_inode; + } else { + while (prev_node->next_inode != del_node) + prev_node = prev_node->next_inode; + + if (del_node->next_inode == NULL) + prev_node->next_inode = NULL; + else + prev_node->next_inode = + prev_node->next_inode->next_inode; + } + + kfree(del_node); + } +} + +/* allocating new chip */ +static struct fpga_inode *append_internal(struct fpga_internal *internal) +{ + struct fpga_inode *new_node = fpga_first_inode; + + if (new_node == NULL) { + new_node = kmalloc(sizeof(struct fpga_inode), GFP_KERNEL); + fpga_first_inode = new_node; + } else { + while (new_node->next_inode != NULL) + new_node = new_node->next_inode; + + new_node->next_inode = + kmalloc(sizeof(struct fpga_inode), GFP_KERNEL); + if (new_node->next_inode != NULL) + new_node = new_node->next_inode; + else + new_node = NULL; + } + + if (new_node != NULL) { + new_node->internal = internal; + new_node->next_inode = NULL; + } + + return new_node; +} + +static int netup_fpga_op_rw(struct fpga_internal *inter, int addr, + u8 val, u8 read) +{ + inter->fpga_rw(inter->dev, NETUP_CI_FLG_AD, addr, 0); + return inter->fpga_rw(inter->dev, 0, val, read); +} + +/* flag - mem/io, read - read/write */ +static int altera_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, + u8 flag, u8 read, int addr, u8 val) +{ + + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + + u8 store; + int mem = 0; + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + netup_fpga_op_rw(inter, NETUP_CI_ADDR0, ((addr << 1) & 0xfe), 0); + netup_fpga_op_rw(inter, NETUP_CI_ADDR1, ((addr >> 7) & 0x7f), 0); + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + + store &= 0x0f; + store |= ((state->nr << 7) | (flag << 6)); + + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, store, 0); + mem = netup_fpga_op_rw(inter, NETUP_CI_DATA, val, read); + + mutex_unlock(&inter->fpga_mutex); + + ci_dbg_print("%s: %s: addr=[0x%02x], %s=%x\n", __func__, + (read) ? "read" : "write", addr, + (flag == NETUP_CI_FLG_CTL) ? "ctl" : "mem", + (read) ? mem : val); + + return mem; +} + +static int altera_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr) +{ + return altera_ci_op_cam(en50221, slot, 0, NETUP_CI_FLG_RD, addr, 0); +} + +static int altera_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data) +{ + return altera_ci_op_cam(en50221, slot, 0, 0, addr, data); +} + +static int altera_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, + int slot, u8 addr) +{ + return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, + NETUP_CI_FLG_RD, addr, 0); +} + +static int altera_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, + u8 addr, u8 data) +{ + return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, 0, addr, data); +} + +static int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + /* reasonable timeout for CI reset is 10 seconds */ + unsigned long t_out = jiffies + msecs_to_jiffies(9999); + int ret; + + ci_dbg_print("%s\n", __func__); + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + (ret & 0xcf) | (1 << (5 - state->nr)), 0); + + mutex_unlock(&inter->fpga_mutex); + + for (;;) { + mdelay(50); + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + 0, NETUP_CI_FLG_RD); + mutex_unlock(&inter->fpga_mutex); + + if ((ret & (1 << (5 - state->nr))) == 0) + break; + if (time_after(jiffies, t_out)) + break; + } + + + ci_dbg_print("%s: %d msecs\n", __func__, + jiffies_to_msecs(jiffies + msecs_to_jiffies(9999) - t_out)); + + return 0; +} + +static int altera_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + /* not implemented */ + return 0; +} + +static int altera_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot) +{ + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + int ret; + + ci_dbg_print("%s\n", __func__); + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + (ret & 0x0f) | (1 << (3 - state->nr)), 0); + + mutex_unlock(&inter->fpga_mutex); + + return 0; +} + +/* work handler */ +static void netup_read_ci_status(struct work_struct *work) +{ + struct fpga_internal *inter = + container_of(work, struct fpga_internal, work); + int ret; + + ci_dbg_print("%s\n", __func__); + + mutex_lock(&inter->fpga_mutex); + /* ack' irq */ + ret = netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0, NETUP_CI_FLG_RD); + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + + mutex_unlock(&inter->fpga_mutex); + + if (inter->state[1] != NULL) { + inter->state[1]->status = + ((ret & 1) == 0 ? + DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY : 0); + ci_dbg_print("%s: setting CI[1] status = 0x%x\n", + __func__, inter->state[1]->status); + } + + if (inter->state[0] != NULL) { + inter->state[0]->status = + ((ret & 2) == 0 ? + DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY : 0); + ci_dbg_print("%s: setting CI[0] status = 0x%x\n", + __func__, inter->state[0]->status); + } +} + +/* CI irq handler */ +int altera_ci_irq(void *dev) +{ + struct fpga_inode *temp_int = NULL; + struct fpga_internal *inter = NULL; + + ci_dbg_print("%s\n", __func__); + + if (dev != NULL) { + temp_int = find_inode(dev); + if (temp_int != NULL) { + inter = temp_int->internal; + schedule_work(&inter->work); + } + } + + return 1; +} +EXPORT_SYMBOL(altera_ci_irq); + +static int altera_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, + int slot, int open) +{ + struct altera_ci_state *state = en50221->data; + + if (0 != slot) + return -EINVAL; + + return state->status; +} + +static void altera_hw_filt_release(void *main_dev, int filt_nr) +{ + struct fpga_inode *temp_int = find_inode(main_dev); + struct netup_hw_pid_filter *pid_filt = NULL; + + ci_dbg_print("%s\n", __func__); + + if (temp_int != NULL) { + pid_filt = temp_int->internal->pid_filt[filt_nr - 1]; + /* stored old feed controls */ + pid_filt->demux->start_feed = pid_filt->start_feed; + pid_filt->demux->stop_feed = pid_filt->stop_feed; + + if (((--(temp_int->internal->filts_used)) <= 0) && + ((temp_int->internal->cis_used) <= 0)) { + + ci_dbg_print("%s: Actually removing\n", __func__); + + remove_inode(temp_int->internal); + kfree(pid_filt->internal); + } + + kfree(pid_filt); + + } + +} +EXPORT_SYMBOL(altera_hw_filt_release); + +void altera_ci_release(void *dev, int ci_nr) +{ + struct fpga_inode *temp_int = find_inode(dev); + struct altera_ci_state *state = NULL; + + ci_dbg_print("%s\n", __func__); + + if (temp_int != NULL) { + state = temp_int->internal->state[ci_nr - 1]; + altera_hw_filt_release(dev, ci_nr); + + + if (((temp_int->internal->filts_used) <= 0) && + ((--(temp_int->internal->cis_used)) <= 0)) { + + ci_dbg_print("%s: Actually removing\n", __func__); + + remove_inode(temp_int->internal); + kfree(state->internal); + } + + if (state != NULL) { + if (state->ca.data != NULL) + dvb_ca_en50221_release(&state->ca); + + kfree(state); + } + } + +} +EXPORT_SYMBOL(altera_ci_release); + +static void altera_pid_control(struct netup_hw_pid_filter *pid_filt, + u16 pid, int onoff) +{ + struct fpga_internal *inter = pid_filt->internal; + u8 store = 0; + + /* pid 0-0x1f always enabled, don't touch them */ + if ((pid == 0x2000) || (pid < 0x20)) + return; + + mutex_lock(&inter->fpga_mutex); + + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, (pid >> 3) & 0xff, 0); + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1, + ((pid >> 11) & 0x03) | (pid_filt->nr << 2), 0); + + store = netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, 0, NETUP_CI_FLG_RD); + + if (onoff)/* 0 - on, 1 - off */ + store |= (1 << (pid & 7)); + else + store &= ~(1 << (pid & 7)); + + netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, store, 0); + + mutex_unlock(&inter->fpga_mutex); + + pid_dbg_print("%s: (%d) set pid: %5d 0x%04x '%s'\n", __func__, + pid_filt->nr, pid, pid, onoff ? "off" : "on"); +} + +static void altera_toggle_fullts_streaming(struct netup_hw_pid_filter *pid_filt, + int filt_nr, int onoff) +{ + struct fpga_internal *inter = pid_filt->internal; + u8 store = 0; + int i; + + pid_dbg_print("%s: pid_filt->nr[%d] now %s\n", __func__, pid_filt->nr, + onoff ? "off" : "on"); + + if (onoff)/* 0 - on, 1 - off */ + store = 0xff;/* ignore pid */ + else + store = 0;/* enable pid */ + + mutex_lock(&inter->fpga_mutex); + + for (i = 0; i < 1024; i++) { + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, i & 0xff, 0); + + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1, + ((i >> 8) & 0x03) | (pid_filt->nr << 2), 0); + /* pid 0-0x1f always enabled */ + netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, + (i > 3 ? store : 0), 0); + } + + mutex_unlock(&inter->fpga_mutex); +} + +static int altera_pid_feed_control(void *demux_dev, int filt_nr, + struct dvb_demux_feed *feed, int onoff) +{ + struct fpga_inode *temp_int = find_dinode(demux_dev); + struct fpga_internal *inter = temp_int->internal; + struct netup_hw_pid_filter *pid_filt = inter->pid_filt[filt_nr - 1]; + + altera_pid_control(pid_filt, feed->pid, onoff ? 0 : 1); + /* call old feed proc's */ + if (onoff) + pid_filt->start_feed(feed); + else + pid_filt->stop_feed(feed); + + if (feed->pid == 0x2000) + altera_toggle_fullts_streaming(pid_filt, filt_nr, + onoff ? 0 : 1); + + return 0; +} +EXPORT_SYMBOL(altera_pid_feed_control); + +static int altera_ci_start_feed(struct dvb_demux_feed *feed, int num) +{ + altera_pid_feed_control(feed->demux, num, feed, 1); + + return 0; +} + +static int altera_ci_stop_feed(struct dvb_demux_feed *feed, int num) +{ + altera_pid_feed_control(feed->demux, num, feed, 0); + + return 0; +} + +static int altera_ci_start_feed_1(struct dvb_demux_feed *feed) +{ + return altera_ci_start_feed(feed, 1); +} + +static int altera_ci_stop_feed_1(struct dvb_demux_feed *feed) +{ + return altera_ci_stop_feed(feed, 1); +} + +static int altera_ci_start_feed_2(struct dvb_demux_feed *feed) +{ + return altera_ci_start_feed(feed, 2); +} + +static int altera_ci_stop_feed_2(struct dvb_demux_feed *feed) +{ + return altera_ci_stop_feed(feed, 2); +} + +static int altera_hw_filt_init(struct altera_ci_config *config, int hw_filt_nr) +{ + struct netup_hw_pid_filter *pid_filt = NULL; + struct fpga_inode *temp_int = find_inode(config->dev); + struct fpga_internal *inter = NULL; + int ret = 0; + + pid_filt = kzalloc(sizeof(struct netup_hw_pid_filter), GFP_KERNEL); + + ci_dbg_print("%s\n", __func__); + + if (!pid_filt) { + ret = -ENOMEM; + goto err; + } + + if (temp_int != NULL) { + inter = temp_int->internal; + (inter->filts_used)++; + ci_dbg_print("%s: Find Internal Structure!\n", __func__); + } else { + inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL); + if (!inter) { + ret = -ENOMEM; + goto err; + } + + temp_int = append_internal(inter); + inter->filts_used = 1; + inter->dev = config->dev; + inter->fpga_rw = config->fpga_rw; + mutex_init(&inter->fpga_mutex); + inter->strt_wrk = 1; + ci_dbg_print("%s: Create New Internal Structure!\n", __func__); + } + + ci_dbg_print("%s: setting hw pid filter = %p for ci = %d\n", __func__, + pid_filt, hw_filt_nr - 1); + inter->pid_filt[hw_filt_nr - 1] = pid_filt; + pid_filt->demux = config->demux; + pid_filt->internal = inter; + pid_filt->nr = hw_filt_nr - 1; + /* store old feed controls */ + pid_filt->start_feed = config->demux->start_feed; + pid_filt->stop_feed = config->demux->stop_feed; + /* replace with new feed controls */ + if (hw_filt_nr == 1) { + pid_filt->demux->start_feed = altera_ci_start_feed_1; + pid_filt->demux->stop_feed = altera_ci_stop_feed_1; + } else if (hw_filt_nr == 2) { + pid_filt->demux->start_feed = altera_ci_start_feed_2; + pid_filt->demux->stop_feed = altera_ci_stop_feed_2; + } + + altera_toggle_fullts_streaming(pid_filt, 0, 1); + + return 0; +err: + ci_dbg_print("%s: Can't init hardware filter: Error %d\n", + __func__, ret); + + kfree(pid_filt); + + return ret; +} +EXPORT_SYMBOL(altera_hw_filt_init); + +int altera_ci_init(struct altera_ci_config *config, int ci_nr) +{ + struct altera_ci_state *state; + struct fpga_inode *temp_int = find_inode(config->dev); + struct fpga_internal *inter = NULL; + int ret = 0; + u8 store = 0; + + state = kzalloc(sizeof(struct altera_ci_state), GFP_KERNEL); + + ci_dbg_print("%s\n", __func__); + + if (!state) { + ret = -ENOMEM; + goto err; + } + + if (temp_int != NULL) { + inter = temp_int->internal; + (inter->cis_used)++; + inter->fpga_rw = config->fpga_rw; + ci_dbg_print("%s: Find Internal Structure!\n", __func__); + } else { + inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL); + if (!inter) { + ret = -ENOMEM; + goto err; + } + + temp_int = append_internal(inter); + inter->cis_used = 1; + inter->dev = config->dev; + inter->fpga_rw = config->fpga_rw; + mutex_init(&inter->fpga_mutex); + inter->strt_wrk = 1; + ci_dbg_print("%s: Create New Internal Structure!\n", __func__); + } + + ci_dbg_print("%s: setting state = %p for ci = %d\n", __func__, + state, ci_nr - 1); + state->internal = inter; + state->nr = ci_nr - 1; + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = altera_ci_read_attribute_mem; + state->ca.write_attribute_mem = altera_ci_write_attribute_mem; + state->ca.read_cam_control = altera_ci_read_cam_ctl; + state->ca.write_cam_control = altera_ci_write_cam_ctl; + state->ca.slot_reset = altera_ci_slot_reset; + state->ca.slot_shutdown = altera_ci_slot_shutdown; + state->ca.slot_ts_enable = altera_ci_slot_ts_ctl; + state->ca.poll_slot_status = altera_poll_ci_slot_status; + state->ca.data = state; + + ret = dvb_ca_en50221_init(config->adapter, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (0 != ret) + goto err; + + inter->state[ci_nr - 1] = state; + + altera_hw_filt_init(config, ci_nr); + + if (inter->strt_wrk) { + INIT_WORK(&inter->work, netup_read_ci_status); + inter->strt_wrk = 0; + } + + ci_dbg_print("%s: CI initialized!\n", __func__); + + mutex_lock(&inter->fpga_mutex); + + /* Enable div */ + netup_fpga_op_rw(inter, NETUP_CI_TSA_DIV, 0x0, 0); + netup_fpga_op_rw(inter, NETUP_CI_TSB_DIV, 0x0, 0); + + /* enable TS out */ + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD); + store |= (3 << 4); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + + ret = netup_fpga_op_rw(inter, NETUP_CI_REVISION, 0, NETUP_CI_FLG_RD); + /* enable irq */ + netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0x44, 0); + + mutex_unlock(&inter->fpga_mutex); + + ci_dbg_print("%s: NetUP CI Revision = 0x%x\n", __func__, ret); + + schedule_work(&inter->work); + + return 0; +err: + ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret); + + kfree(state); + + return ret; +} +EXPORT_SYMBOL(altera_ci_init); + +int altera_ci_tuner_reset(void *dev, int ci_nr) +{ + struct fpga_inode *temp_int = find_inode(dev); + struct fpga_internal *inter = NULL; + u8 store; + + ci_dbg_print("%s\n", __func__); + + if (temp_int == NULL) + return -1; + + if (temp_int->internal == NULL) + return -1; + + inter = temp_int->internal; + + mutex_lock(&inter->fpga_mutex); + + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD); + store &= ~(4 << (2 - ci_nr)); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + msleep(100); + store |= (4 << (2 - ci_nr)); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + + mutex_unlock(&inter->fpga_mutex); + + return 0; +} +EXPORT_SYMBOL(altera_ci_tuner_reset); diff --git a/drivers/media/pci/cx23885/altera-ci.h b/drivers/media/pci/cx23885/altera-ci.h new file mode 100644 index 00000000..4998c96c --- /dev/null +++ b/drivers/media/pci/cx23885/altera-ci.h @@ -0,0 +1,101 @@ +/* + * altera-ci.c + * + * CI driver in conjunction with NetUp Dual DVB-T/C RF CI card + * + * Copyright (C) 2010 NetUP Inc. + * Copyright (C) 2010 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ALTERA_CI_H +#define __ALTERA_CI_H + +#include + +#define ALT_DATA 0x000000ff +#define ALT_TDI 0x00008000 +#define ALT_TDO 0x00004000 +#define ALT_TCK 0x00002000 +#define ALT_RDY 0x00001000 +#define ALT_RD 0x00000800 +#define ALT_WR 0x00000400 +#define ALT_AD_RG 0x00000200 +#define ALT_CS 0x00000100 + +struct altera_ci_config { + void *dev;/* main dev, for example cx23885_dev */ + void *adapter;/* for CI to connect to */ + struct dvb_demux *demux;/* for hardware PID filter to connect to */ + int (*fpga_rw) (void *dev, int ad_rg, int val, int rw); +}; + +#if IS_ENABLED(CONFIG_MEDIA_ALTERA_CI) + +extern int altera_ci_init(struct altera_ci_config *config, int ci_nr); +extern void altera_ci_release(void *dev, int ci_nr); +extern int altera_ci_irq(void *dev); +extern int altera_ci_tuner_reset(void *dev, int ci_nr); + +#else + +static inline int altera_ci_init(struct altera_ci_config *config, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline void altera_ci_release(void *dev, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline int altera_ci_irq(void *dev) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline int altera_ci_tuner_reset(void *dev, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +#endif +#if 0 +static inline int altera_hw_filt_init(struct altera_ci_config *config, + int hw_filt_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline void altera_hw_filt_release(void *dev, int filt_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline int altera_pid_feed_control(void *dev, int filt_nr, + struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +#endif /* CONFIG_MEDIA_ALTERA_CI */ + +#endif /* __ALTERA_CI_H */ diff --git a/drivers/media/pci/cx23885/cimax2.c b/drivers/media/pci/cx23885/cimax2.c new file mode 100644 index 00000000..16fa7ea4 --- /dev/null +++ b/drivers/media/pci/cx23885/cimax2.c @@ -0,0 +1,550 @@ +/* + * cimax2.c + * + * CIMax2(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * Copyright (C) 2009 Abylay Ospan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" +#include "cimax2.h" +#include "dvb_ca_en50221.h" + +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + +/**** Bit definitions for MC417_RWD and MC417_OEN registers *** + bits 31-16 ++-----------+ +| Reserved | ++-----------+ + bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| WR# | RD# | | ACK# | ADHI | ADLO | CS1# | CS0# | ++-------+-------+-------+-------+-------+-------+-------+-------+ + bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| DATA7| DATA6| DATA5| DATA4| DATA3| DATA2| DATA1| DATA0| ++-------+-------+-------+-------+-------+-------+-------+-------+ +***/ +/* MC417 */ +#define NETUP_DATA 0x000000ff +#define NETUP_WR 0x00008000 +#define NETUP_RD 0x00004000 +#define NETUP_ACK 0x00001000 +#define NETUP_ADHI 0x00000800 +#define NETUP_ADLO 0x00000400 +#define NETUP_CS1 0x00000200 +#define NETUP_CS0 0x00000100 +#define NETUP_EN_ALL 0x00001000 +#define NETUP_CTRL_OFF (NETUP_CS1 | NETUP_CS0 | NETUP_WR | NETUP_RD) +#define NETUP_CI_CTL 0x04 +#define NETUP_CI_RD 1 + +#define NETUP_IRQ_DETAM 0x1 +#define NETUP_IRQ_IRQAM 0x4 + +static unsigned int ci_dbg; +module_param(ci_dbg, int, 0644); +MODULE_PARM_DESC(ci_dbg, "Enable CI debugging"); + +static unsigned int ci_irq_enable; +module_param(ci_irq_enable, int, 0644); +MODULE_PARM_DESC(ci_irq_enable, "Enable IRQ from CAM"); + +#define ci_dbg_print(args...) \ + do { \ + if (ci_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +#define ci_irq_flags() (ci_irq_enable ? NETUP_IRQ_IRQAM : 0) + +/* stores all private variables for communication with CI */ +struct netup_ci_state { + struct dvb_ca_en50221 ca; + struct mutex ca_mutex; + struct i2c_adapter *i2c_adap; + u8 ci_i2c_addr; + int status; + struct work_struct work; + void *priv; + u8 current_irq_mode; + int current_ci_flag; + unsigned long next_status_checked_time; +}; + + +static int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg, + u8 *buf, int len) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = addr, + .flags = 0, + .buf = ®, + .len = 1 + }, { + .addr = addr, + .flags = I2C_M_RD, + .buf = buf, + .len = len + } + }; + + ret = i2c_transfer(i2c_adap, msg, 2); + + if (ret != 2) { + ci_dbg_print("%s: i2c read error, Reg = 0x%02x, Status = %d\n", + __func__, reg, ret); + + return -1; + } + + ci_dbg_print("%s: i2c read Addr=0x%04x, Reg = 0x%02x, data = %02x\n", + __func__, addr, reg, buf[0]); + + return 0; +} + +static int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg, + u8 *buf, int len) +{ + int ret; + u8 buffer[MAX_XFER_SIZE]; + + struct i2c_msg msg = { + .addr = addr, + .flags = 0, + .buf = &buffer[0], + .len = len + 1 + }; + + if (1 + len > sizeof(buffer)) { + printk(KERN_WARNING + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + + buffer[0] = reg; + memcpy(&buffer[1], buf, len); + + ret = i2c_transfer(i2c_adap, &msg, 1); + + if (ret != 1) { + ci_dbg_print("%s: i2c write error, Reg=[0x%02x], Status=%d\n", + __func__, reg, ret); + return -1; + } + + return 0; +} + +static int netup_ci_get_mem(struct cx23885_dev *dev) +{ + int mem; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + + for (;;) { + mem = cx_read(MC417_RWD); + if ((mem & NETUP_ACK) == 0) + break; + if (time_after(jiffies, timeout)) + break; + udelay(1); + } + + cx_set(MC417_RWD, NETUP_CTRL_OFF); + + return mem & 0xff; +} + +static int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, + u8 flag, u8 read, int addr, u8 data) +{ + struct netup_ci_state *state = en50221->data; + struct cx23885_tsport *port = state->priv; + struct cx23885_dev *dev = port->dev; + + u8 store; + int mem; + int ret; + + if (0 != slot) + return -EINVAL; + + if (state->current_ci_flag != flag) { + ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &store, 1); + if (ret != 0) + return ret; + + store &= ~0x0c; + store |= flag; + + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &store, 1); + if (ret != 0) + return ret; + } + state->current_ci_flag = flag; + + mutex_lock(&dev->gpio_lock); + + /* write addr */ + cx_write(MC417_OEN, NETUP_EN_ALL); + cx_write(MC417_RWD, NETUP_CTRL_OFF | + NETUP_ADLO | (0xff & addr)); + cx_clear(MC417_RWD, NETUP_ADLO); + cx_write(MC417_RWD, NETUP_CTRL_OFF | + NETUP_ADHI | (0xff & (addr >> 8))); + cx_clear(MC417_RWD, NETUP_ADHI); + + if (read) { /* data in */ + cx_write(MC417_OEN, NETUP_EN_ALL | NETUP_DATA); + } else /* data out */ + cx_write(MC417_RWD, NETUP_CTRL_OFF | data); + + /* choose chip */ + cx_clear(MC417_RWD, + (state->ci_i2c_addr == 0x40) ? NETUP_CS0 : NETUP_CS1); + /* read/write */ + cx_clear(MC417_RWD, (read) ? NETUP_RD : NETUP_WR); + mem = netup_ci_get_mem(dev); + + mutex_unlock(&dev->gpio_lock); + + if (!read) + if (mem < 0) + return -EREMOTEIO; + + ci_dbg_print("%s: %s: chipaddr=[0x%x] addr=[0x%02x], %s=%x\n", __func__, + (read) ? "read" : "write", state->ci_i2c_addr, addr, + (flag == NETUP_CI_CTL) ? "ctl" : "mem", + (read) ? mem : data); + + if (read) + return mem; + + return 0; +} + +int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr) +{ + return netup_ci_op_cam(en50221, slot, 0, NETUP_CI_RD, addr, 0); +} + +int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data) +{ + return netup_ci_op_cam(en50221, slot, 0, 0, addr, data); +} + +int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, + u8 addr) +{ + return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, + NETUP_CI_RD, addr, 0); +} + +int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, + u8 addr, u8 data) +{ + return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, 0, addr, data); +} + +int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct netup_ci_state *state = en50221->data; + u8 buf = 0x80; + int ret; + + if (0 != slot) + return -EINVAL; + + udelay(500); + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); + + if (ret != 0) + return ret; + + udelay(500); + + buf = 0x00; + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); + + msleep(1000); + dvb_ca_en50221_camready_irq(&state->ca, 0); + + return 0; + +} + +int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + /* not implemented */ + return 0; +} + +static int netup_ci_set_irq(struct dvb_ca_en50221 *en50221, u8 irq_mode) +{ + struct netup_ci_state *state = en50221->data; + int ret; + + if (irq_mode == state->current_irq_mode) + return 0; + + ci_dbg_print("%s: chipaddr=[0x%x] setting ci IRQ to [0x%x] \n", + __func__, state->ci_i2c_addr, irq_mode); + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0x1b, &irq_mode, 1); + + if (ret != 0) + return ret; + + state->current_irq_mode = irq_mode; + + return 0; +} + +int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot) +{ + struct netup_ci_state *state = en50221->data; + u8 buf; + + if (0 != slot) + return -EINVAL; + + netup_read_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); + buf |= 0x60; + + return netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); +} + +/* work handler */ +static void netup_read_ci_status(struct work_struct *work) +{ + struct netup_ci_state *state = + container_of(work, struct netup_ci_state, work); + u8 buf[33]; + int ret; + + /* CAM module IRQ processing. fast operation */ + dvb_ca_en50221_frda_irq(&state->ca, 0); + + /* CAM module INSERT/REMOVE processing. slow operation because of i2c + * transfers */ + if (time_after(jiffies, state->next_status_checked_time) + || !state->status) { + ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf[0], 33); + + state->next_status_checked_time = jiffies + + msecs_to_jiffies(1000); + + if (ret != 0) + return; + + ci_dbg_print("%s: Slot Status Addr=[0x%04x], " + "Reg=[0x%02x], data=%02x, " + "TS config = %02x\n", __func__, + state->ci_i2c_addr, 0, buf[0], + buf[0]); + + + if (buf[0] & 1) + state->status = DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + else + state->status = 0; + } +} + +/* CI irq handler */ +int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status) +{ + struct cx23885_tsport *port = NULL; + struct netup_ci_state *state = NULL; + + ci_dbg_print("%s:\n", __func__); + + if (0 == (pci_status & (PCI_MSK_GPIO0 | PCI_MSK_GPIO1))) + return 0; + + if (pci_status & PCI_MSK_GPIO0) { + port = &dev->ts1; + state = port->port_priv; + schedule_work(&state->work); + ci_dbg_print("%s: Wakeup CI0\n", __func__); + } + + if (pci_status & PCI_MSK_GPIO1) { + port = &dev->ts2; + state = port->port_priv; + schedule_work(&state->work); + ci_dbg_print("%s: Wakeup CI1\n", __func__); + } + + return 1; +} + +int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, + int slot, int open) +{ + struct netup_ci_state *state = en50221->data; + + if (0 != slot) + return -EINVAL; + + netup_ci_set_irq(en50221, open ? (NETUP_IRQ_DETAM | ci_irq_flags()) + : NETUP_IRQ_DETAM); + + return state->status; +} + +int netup_ci_init(struct cx23885_tsport *port) +{ + struct netup_ci_state *state; + u8 cimax_init[34] = { + 0x00, /* module A control*/ + 0x00, /* auto select mask high A */ + 0x00, /* auto select mask low A */ + 0x00, /* auto select pattern high A */ + 0x00, /* auto select pattern low A */ + 0x44, /* memory access time A */ + 0x00, /* invert input A */ + 0x00, /* RFU */ + 0x00, /* RFU */ + 0x00, /* module B control*/ + 0x00, /* auto select mask high B */ + 0x00, /* auto select mask low B */ + 0x00, /* auto select pattern high B */ + 0x00, /* auto select pattern low B */ + 0x44, /* memory access time B */ + 0x00, /* invert input B */ + 0x00, /* RFU */ + 0x00, /* RFU */ + 0x00, /* auto select mask high Ext */ + 0x00, /* auto select mask low Ext */ + 0x00, /* auto select pattern high Ext */ + 0x00, /* auto select pattern low Ext */ + 0x00, /* RFU */ + 0x02, /* destination - module A */ + 0x01, /* power on (use it like store place) */ + 0x00, /* RFU */ + 0x00, /* int status read only */ + ci_irq_flags() | NETUP_IRQ_DETAM, /* DETAM, IRQAM unmasked */ + 0x05, /* EXTINT=active-high, INT=push-pull */ + 0x00, /* USCG1 */ + 0x04, /* ack active low */ + 0x00, /* LOCK = 0 */ + 0x33, /* serial mode, rising in, rising out, MSB first*/ + 0x31, /* synchronization */ + }; + int ret; + + ci_dbg_print("%s\n", __func__); + state = kzalloc(sizeof(struct netup_ci_state), GFP_KERNEL); + if (!state) { + ci_dbg_print("%s: Unable create CI structure!\n", __func__); + ret = -ENOMEM; + goto err; + } + + port->port_priv = state; + + switch (port->nr) { + case 1: + state->ci_i2c_addr = 0x40; + break; + case 2: + state->ci_i2c_addr = 0x41; + break; + } + + state->i2c_adap = &port->dev->i2c_bus[0].i2c_adap; + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = netup_ci_read_attribute_mem; + state->ca.write_attribute_mem = netup_ci_write_attribute_mem; + state->ca.read_cam_control = netup_ci_read_cam_ctl; + state->ca.write_cam_control = netup_ci_write_cam_ctl; + state->ca.slot_reset = netup_ci_slot_reset; + state->ca.slot_shutdown = netup_ci_slot_shutdown; + state->ca.slot_ts_enable = netup_ci_slot_ts_ctl; + state->ca.poll_slot_status = netup_poll_ci_slot_status; + state->ca.data = state; + state->priv = port; + state->current_irq_mode = ci_irq_flags() | NETUP_IRQ_DETAM; + + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &cimax_init[0], 34); + /* lock registers */ + ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0x1f, &cimax_init[0x18], 1); + /* power on slots */ + ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0x18, &cimax_init[0x18], 1); + + if (0 != ret) + goto err; + + ret = dvb_ca_en50221_init(&port->frontends.adapter, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (0 != ret) + goto err; + + INIT_WORK(&state->work, netup_read_ci_status); + schedule_work(&state->work); + + ci_dbg_print("%s: CI initialized!\n", __func__); + + return 0; +err: + ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret); + kfree(state); + return ret; +} + +void netup_ci_exit(struct cx23885_tsport *port) +{ + struct netup_ci_state *state; + + if (NULL == port) + return; + + state = (struct netup_ci_state *)port->port_priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + kfree(state); +} diff --git a/drivers/media/pci/cx23885/cimax2.h b/drivers/media/pci/cx23885/cimax2.h new file mode 100644 index 00000000..518744a4 --- /dev/null +++ b/drivers/media/pci/cx23885/cimax2.h @@ -0,0 +1,47 @@ +/* + * cimax2.h + * + * CIMax(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * Copyright (C) 2009 Abylay Ospan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CIMAX2_H +#define CIMAX2_H +#include "dvb_ca_en50221.h" + +extern int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr); +extern int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data); +extern int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, + int slot, u8 addr); +extern int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, + int slot, u8 addr, u8 data); +extern int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status); +extern int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, + int slot, int open); +extern int netup_ci_init(struct cx23885_tsport *port); +extern void netup_ci_exit(struct cx23885_tsport *port); + +#endif diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c new file mode 100644 index 00000000..6dea11a7 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-417.c @@ -0,0 +1,1790 @@ +/* + * + * Support for a cx23417 mpeg encoder via cx23885 host port. + * + * (c) 2004 Jelle Foks + * (c) 2004 Gerd Knorr + * (c) 2008 Steven Toth + * - CX23885/7/8 support + * + * Includes parts from the ivtv driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx23885.h" +#include "cx23885-ioctl.h" + +#define CX23885_FIRM_IMAGE_SIZE 376836 +#define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw" + +static unsigned int mpegbufs = 32; +module_param(mpegbufs, int, 0644); +MODULE_PARM_DESC(mpegbufs, "number of mpeg buffers, range 2-32"); +static unsigned int mpeglines = 32; +module_param(mpeglines, int, 0644); +MODULE_PARM_DESC(mpeglines, "number of lines in an MPEG buffer, range 2-32"); +static unsigned int mpeglinesize = 512; +module_param(mpeglinesize, int, 0644); +MODULE_PARM_DESC(mpeglinesize, + "number of bytes in each line of an MPEG buffer, range 512-1024"); + +static unsigned int v4l_debug; +module_param(v4l_debug, int, 0644); +MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages"); + +#define dprintk(level, fmt, arg...)\ + do { if (v4l_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, \ + (dev) ? dev->name : "cx23885[?]", ## arg); \ + } while (0) + +static struct cx23885_tvnorm cx23885_tvnorms[] = { + { + .name = "NTSC-M", + .id = V4L2_STD_NTSC_M, + }, { + .name = "NTSC-JP", + .id = V4L2_STD_NTSC_M_JP, + }, { + .name = "PAL-BG", + .id = V4L2_STD_PAL_BG, + }, { + .name = "PAL-DK", + .id = V4L2_STD_PAL_DK, + }, { + .name = "PAL-I", + .id = V4L2_STD_PAL_I, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + }, { + .name = "PAL-N", + .id = V4L2_STD_PAL_N, + }, { + .name = "PAL-Nc", + .id = V4L2_STD_PAL_Nc, + }, { + .name = "PAL-60", + .id = V4L2_STD_PAL_60, + }, { + .name = "SECAM-L", + .id = V4L2_STD_SECAM_L, + }, { + .name = "SECAM-DK", + .id = V4L2_STD_SECAM_DK, + } +}; + +/* ------------------------------------------------------------------ */ +enum cx23885_capture_type { + CX23885_MPEG_CAPTURE, + CX23885_RAW_CAPTURE, + CX23885_RAW_PASSTHRU_CAPTURE +}; +enum cx23885_capture_bits { + CX23885_RAW_BITS_NONE = 0x00, + CX23885_RAW_BITS_YUV_CAPTURE = 0x01, + CX23885_RAW_BITS_PCM_CAPTURE = 0x02, + CX23885_RAW_BITS_VBI_CAPTURE = 0x04, + CX23885_RAW_BITS_PASSTHRU_CAPTURE = 0x08, + CX23885_RAW_BITS_TO_HOST_CAPTURE = 0x10 +}; +enum cx23885_capture_end { + CX23885_END_AT_GOP, /* stop at the end of gop, generate irq */ + CX23885_END_NOW, /* stop immediately, no irq */ +}; +enum cx23885_framerate { + CX23885_FRAMERATE_NTSC_30, /* NTSC: 30fps */ + CX23885_FRAMERATE_PAL_25 /* PAL: 25fps */ +}; +enum cx23885_stream_port { + CX23885_OUTPUT_PORT_MEMORY, + CX23885_OUTPUT_PORT_STREAMING, + CX23885_OUTPUT_PORT_SERIAL +}; +enum cx23885_data_xfer_status { + CX23885_MORE_BUFFERS_FOLLOW, + CX23885_LAST_BUFFER, +}; +enum cx23885_picture_mask { + CX23885_PICTURE_MASK_NONE, + CX23885_PICTURE_MASK_I_FRAMES, + CX23885_PICTURE_MASK_I_P_FRAMES = 0x3, + CX23885_PICTURE_MASK_ALL_FRAMES = 0x7, +}; +enum cx23885_vbi_mode_bits { + CX23885_VBI_BITS_SLICED, + CX23885_VBI_BITS_RAW, +}; +enum cx23885_vbi_insertion_bits { + CX23885_VBI_BITS_INSERT_IN_XTENSION_USR_DATA, + CX23885_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM = 0x2 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1, +}; +enum cx23885_dma_unit { + CX23885_DMA_BYTES, + CX23885_DMA_FRAMES, +}; +enum cx23885_dma_transfer_status_bits { + CX23885_DMA_TRANSFER_BITS_DONE = 0x01, + CX23885_DMA_TRANSFER_BITS_ERROR = 0x04, + CX23885_DMA_TRANSFER_BITS_LL_ERROR = 0x10, +}; +enum cx23885_pause { + CX23885_PAUSE_ENCODING, + CX23885_RESUME_ENCODING, +}; +enum cx23885_copyright { + CX23885_COPYRIGHT_OFF, + CX23885_COPYRIGHT_ON, +}; +enum cx23885_notification_type { + CX23885_NOTIFICATION_REFRESH, +}; +enum cx23885_notification_status { + CX23885_NOTIFICATION_OFF, + CX23885_NOTIFICATION_ON, +}; +enum cx23885_notification_mailbox { + CX23885_NOTIFICATION_NO_MAILBOX = -1, +}; +enum cx23885_field1_lines { + CX23885_FIELD1_SAA7114 = 0x00EF, /* 239 */ + CX23885_FIELD1_SAA7115 = 0x00F0, /* 240 */ + CX23885_FIELD1_MICRONAS = 0x0105, /* 261 */ +}; +enum cx23885_field2_lines { + CX23885_FIELD2_SAA7114 = 0x00EF, /* 239 */ + CX23885_FIELD2_SAA7115 = 0x00F0, /* 240 */ + CX23885_FIELD2_MICRONAS = 0x0106, /* 262 */ +}; +enum cx23885_custom_data_type { + CX23885_CUSTOM_EXTENSION_USR_DATA, + CX23885_CUSTOM_PRIVATE_PACKET, +}; +enum cx23885_mute { + CX23885_UNMUTE, + CX23885_MUTE, +}; +enum cx23885_mute_video_mask { + CX23885_MUTE_VIDEO_V_MASK = 0x0000FF00, + CX23885_MUTE_VIDEO_U_MASK = 0x00FF0000, + CX23885_MUTE_VIDEO_Y_MASK = 0xFF000000, +}; +enum cx23885_mute_video_shift { + CX23885_MUTE_VIDEO_V_SHIFT = 8, + CX23885_MUTE_VIDEO_U_SHIFT = 16, + CX23885_MUTE_VIDEO_Y_SHIFT = 24, +}; + +/* defines below are from ivtv-driver.h */ +#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF + +/* Firmware API commands */ +#define IVTV_API_STD_TIMEOUT 500 + +/* Registers */ +/* IVTV_REG_OFFSET */ +#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8) +#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC) +#define IVTV_REG_SPU (0x9050) +#define IVTV_REG_HW_BLOCKS (0x9054) +#define IVTV_REG_VPU (0x9058) +#define IVTV_REG_APU (0xA064) + +/**** Bit definitions for MC417_RWD and MC417_OEN registers *** + bits 31-16 ++-----------+ +| Reserved | ++-----------+ + bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| MIWR# | MIRD# | MICS# |MIRDY# |MIADDR3|MIADDR2|MIADDR1|MIADDR0| ++-------+-------+-------+-------+-------+-------+-------+-------+ + bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 ++-------+-------+-------+-------+-------+-------+-------+-------+ +|MIDATA7|MIDATA6|MIDATA5|MIDATA4|MIDATA3|MIDATA2|MIDATA1|MIDATA0| ++-------+-------+-------+-------+-------+-------+-------+-------+ +***/ +#define MC417_MIWR 0x8000 +#define MC417_MIRD 0x4000 +#define MC417_MICS 0x2000 +#define MC417_MIRDY 0x1000 +#define MC417_MIADDR 0x0F00 +#define MC417_MIDATA 0x00FF + +/* MIADDR* nibble definitions */ +#define MCI_MEMORY_DATA_BYTE0 0x000 +#define MCI_MEMORY_DATA_BYTE1 0x100 +#define MCI_MEMORY_DATA_BYTE2 0x200 +#define MCI_MEMORY_DATA_BYTE3 0x300 +#define MCI_MEMORY_ADDRESS_BYTE2 0x400 +#define MCI_MEMORY_ADDRESS_BYTE1 0x500 +#define MCI_MEMORY_ADDRESS_BYTE0 0x600 +#define MCI_REGISTER_DATA_BYTE0 0x800 +#define MCI_REGISTER_DATA_BYTE1 0x900 +#define MCI_REGISTER_DATA_BYTE2 0xA00 +#define MCI_REGISTER_DATA_BYTE3 0xB00 +#define MCI_REGISTER_ADDRESS_BYTE0 0xC00 +#define MCI_REGISTER_ADDRESS_BYTE1 0xD00 +#define MCI_REGISTER_MODE 0xE00 + +/* Read and write modes */ +#define MCI_MODE_REGISTER_READ 0 +#define MCI_MODE_REGISTER_WRITE 1 +#define MCI_MODE_MEMORY_READ 0 +#define MCI_MODE_MEMORY_WRITE 0x40 + +/*** Bit definitions for MC417_CTL register **** + bits 31-6 bits 5-4 bit 3 bits 2-1 Bit 0 ++--------+-------------+--------+--------------+------------+ +|Reserved|MC417_SPD_CTL|Reserved|MC417_GPIO_SEL|UART_GPIO_EN| ++--------+-------------+--------+--------------+------------+ +***/ +#define MC417_SPD_CTL(x) (((x) << 4) & 0x00000030) +#define MC417_GPIO_SEL(x) (((x) << 1) & 0x00000006) +#define MC417_UART_GPIO_EN 0x00000001 + +/* Values for speed control */ +#define MC417_SPD_CTL_SLOW 0x1 +#define MC417_SPD_CTL_MEDIUM 0x0 +#define MC417_SPD_CTL_FAST 0x3 /* b'1x, but we use b'11 */ + +/* Values for GPIO select */ +#define MC417_GPIO_SEL_GPIO3 0x3 +#define MC417_GPIO_SEL_GPIO2 0x2 +#define MC417_GPIO_SEL_GPIO1 0x1 +#define MC417_GPIO_SEL_GPIO0 0x0 + +void cx23885_mc417_init(struct cx23885_dev *dev) +{ + u32 regval; + + dprintk(2, "%s()\n", __func__); + + /* Configure MC417_CTL register to defaults. */ + regval = MC417_SPD_CTL(MC417_SPD_CTL_FAST) | + MC417_GPIO_SEL(MC417_GPIO_SEL_GPIO3) | + MC417_UART_GPIO_EN; + cx_write(MC417_CTL, regval); + + /* Configure MC417_OEN to defaults. */ + regval = MC417_MIRDY; + cx_write(MC417_OEN, regval); + + /* Configure MC417_RWD to defaults. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS; + cx_write(MC417_RWD, regval); +} + +static int mc417_wait_ready(struct cx23885_dev *dev) +{ + u32 mi_ready; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + + for (;;) { + mi_ready = cx_read(MC417_RWD) & MC417_MIRDY; + if (mi_ready != 0) + return 0; + if (time_after(jiffies, timeout)) + return -1; + udelay(1); + } +} + +int mc417_register_write(struct cx23885_dev *dev, u16 address, u32 value) +{ + u32 regval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0 | + (value & 0x000000FF); + cx_write(MC417_RWD, regval); + + /* Transition CS/WR to effect write transaction across bus. */ + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1 | + ((value >> 8) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2 | + ((value >> 16) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3 | + ((value >> 24) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Indicate that this is a write. */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE | + MCI_MODE_REGISTER_WRITE; + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + return mc417_wait_ready(dev); +} + +int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value) +{ + int retval; + u32 regval; + u32 tempval; + u32 dataval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 | + ((address & 0x00FF)); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Indicate that this is a register read. */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE | + MCI_MODE_REGISTER_READ; + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + retval = mc417_wait_ready(dev); + + /* switch the DAT0-7 GPIO[10:3] to input mode */ + cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA); + + /* Read data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0; + cx_write(MC417_RWD, regval); + + /* Transition RD to effect read transaction across bus. + * Transtion 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)? + * Should it be 0x9000 -> 0xF000 (also why is RDY being set, its + * input only...) + */ + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0; + cx_write(MC417_RWD, regval); + + /* Collect byte */ + tempval = cx_read(MC417_RWD); + dataval = tempval & 0x000000FF; + + /* Bring CS and RD high. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 8); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 16); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 24); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + *value = dataval; + + return retval; +} + +int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value) +{ + u32 regval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0 | + (value & 0x000000FF); + cx_write(MC417_RWD, regval); + + /* Transition CS/WR to effect write transaction across bus. */ + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1 | + ((value >> 8) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2 | + ((value >> 16) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3 | + ((value >> 24) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 | + MCI_MODE_MEMORY_WRITE | ((address >> 16) & 0x3F); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + return mc417_wait_ready(dev); +} + +int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value) +{ + int retval; + u32 regval; + u32 tempval; + u32 dataval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write address byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 | + MCI_MODE_MEMORY_READ | ((address >> 16) & 0x3F); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + retval = mc417_wait_ready(dev); + + /* switch the DAT0-7 GPIO[10:3] to input mode */ + cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA); + + /* Read data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3; + cx_write(MC417_RWD, regval); + + /* Transition RD to effect read transaction across bus. */ + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3; + cx_write(MC417_RWD, regval); + + /* Collect byte */ + tempval = cx_read(MC417_RWD); + dataval = ((tempval & 0x000000FF) << 24); + + /* Bring CS and RD high. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 16); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 8); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= (tempval & 0x000000FF); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + *value = dataval; + + return retval; +} + +void mc417_gpio_set(struct cx23885_dev *dev, u32 mask) +{ + u32 val; + + /* Set the gpio value */ + mc417_register_read(dev, 0x900C, &val); + val |= (mask & 0x000ffff); + mc417_register_write(dev, 0x900C, val); +} + +void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask) +{ + u32 val; + + /* Clear the gpio value */ + mc417_register_read(dev, 0x900C, &val); + val &= ~(mask & 0x0000ffff); + mc417_register_write(dev, 0x900C, val); +} + +void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput) +{ + u32 val; + + /* Enable GPIO direction bits */ + mc417_register_read(dev, 0x9020, &val); + if (asoutput) + val |= (mask & 0x0000ffff); + else + val &= ~(mask & 0x0000ffff); + + mc417_register_write(dev, 0x9020, val); +} +/* ------------------------------------------------------------------ */ + +/* MPEG encoder API */ +static char *cmd_to_str(int cmd) +{ + switch (cmd) { + case CX2341X_ENC_PING_FW: + return "PING_FW"; + case CX2341X_ENC_START_CAPTURE: + return "START_CAPTURE"; + case CX2341X_ENC_STOP_CAPTURE: + return "STOP_CAPTURE"; + case CX2341X_ENC_SET_AUDIO_ID: + return "SET_AUDIO_ID"; + case CX2341X_ENC_SET_VIDEO_ID: + return "SET_VIDEO_ID"; + case CX2341X_ENC_SET_PCR_ID: + return "SET_PCR_ID"; + case CX2341X_ENC_SET_FRAME_RATE: + return "SET_FRAME_RATE"; + case CX2341X_ENC_SET_FRAME_SIZE: + return "SET_FRAME_SIZE"; + case CX2341X_ENC_SET_BIT_RATE: + return "SET_BIT_RATE"; + case CX2341X_ENC_SET_GOP_PROPERTIES: + return "SET_GOP_PROPERTIES"; + case CX2341X_ENC_SET_ASPECT_RATIO: + return "SET_ASPECT_RATIO"; + case CX2341X_ENC_SET_DNR_FILTER_MODE: + return "SET_DNR_FILTER_MODE"; + case CX2341X_ENC_SET_DNR_FILTER_PROPS: + return "SET_DNR_FILTER_PROPS"; + case CX2341X_ENC_SET_CORING_LEVELS: + return "SET_CORING_LEVELS"; + case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE: + return "SET_SPATIAL_FILTER_TYPE"; + case CX2341X_ENC_SET_VBI_LINE: + return "SET_VBI_LINE"; + case CX2341X_ENC_SET_STREAM_TYPE: + return "SET_STREAM_TYPE"; + case CX2341X_ENC_SET_OUTPUT_PORT: + return "SET_OUTPUT_PORT"; + case CX2341X_ENC_SET_AUDIO_PROPERTIES: + return "SET_AUDIO_PROPERTIES"; + case CX2341X_ENC_HALT_FW: + return "HALT_FW"; + case CX2341X_ENC_GET_VERSION: + return "GET_VERSION"; + case CX2341X_ENC_SET_GOP_CLOSURE: + return "SET_GOP_CLOSURE"; + case CX2341X_ENC_GET_SEQ_END: + return "GET_SEQ_END"; + case CX2341X_ENC_SET_PGM_INDEX_INFO: + return "SET_PGM_INDEX_INFO"; + case CX2341X_ENC_SET_VBI_CONFIG: + return "SET_VBI_CONFIG"; + case CX2341X_ENC_SET_DMA_BLOCK_SIZE: + return "SET_DMA_BLOCK_SIZE"; + case CX2341X_ENC_GET_PREV_DMA_INFO_MB_10: + return "GET_PREV_DMA_INFO_MB_10"; + case CX2341X_ENC_GET_PREV_DMA_INFO_MB_9: + return "GET_PREV_DMA_INFO_MB_9"; + case CX2341X_ENC_SCHED_DMA_TO_HOST: + return "SCHED_DMA_TO_HOST"; + case CX2341X_ENC_INITIALIZE_INPUT: + return "INITIALIZE_INPUT"; + case CX2341X_ENC_SET_FRAME_DROP_RATE: + return "SET_FRAME_DROP_RATE"; + case CX2341X_ENC_PAUSE_ENCODER: + return "PAUSE_ENCODER"; + case CX2341X_ENC_REFRESH_INPUT: + return "REFRESH_INPUT"; + case CX2341X_ENC_SET_COPYRIGHT: + return "SET_COPYRIGHT"; + case CX2341X_ENC_SET_EVENT_NOTIFICATION: + return "SET_EVENT_NOTIFICATION"; + case CX2341X_ENC_SET_NUM_VSYNC_LINES: + return "SET_NUM_VSYNC_LINES"; + case CX2341X_ENC_SET_PLACEHOLDER: + return "SET_PLACEHOLDER"; + case CX2341X_ENC_MUTE_VIDEO: + return "MUTE_VIDEO"; + case CX2341X_ENC_MUTE_AUDIO: + return "MUTE_AUDIO"; + case CX2341X_ENC_MISC: + return "MISC"; + default: + return "UNKNOWN"; + } +} + +static int cx23885_mbox_func(void *priv, + u32 command, + int in, + int out, + u32 data[CX2341X_MBOX_MAX_DATA]) +{ + struct cx23885_dev *dev = priv; + unsigned long timeout; + u32 value, flag, retval = 0; + int i; + + dprintk(3, "%s: command(0x%X) = %s\n", __func__, command, + cmd_to_str(command)); + + /* this may not be 100% safe if we can't read any memory location + without side effects */ + mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value); + if (value != 0x12345678) { + printk(KERN_ERR + "Firmware and/or mailbox pointer not initialized " + "or corrupted, signature = 0x%x, cmd = %s\n", value, + cmd_to_str(command)); + return -1; + } + + /* This read looks at 32 bits, but flag is only 8 bits. + * Seems we also bail if CMD or TIMEOUT bytes are set??? + */ + mc417_memory_read(dev, dev->cx23417_mailbox, &flag); + if (flag) { + printk(KERN_ERR "ERROR: Mailbox appears to be in use " + "(%x), cmd = %s\n", flag, cmd_to_str(command)); + return -1; + } + + flag |= 1; /* tell 'em we're working on it */ + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + /* write command + args + fill remaining with zeros */ + /* command code */ + mc417_memory_write(dev, dev->cx23417_mailbox + 1, command); + mc417_memory_write(dev, dev->cx23417_mailbox + 3, + IVTV_API_STD_TIMEOUT); /* timeout */ + for (i = 0; i < in; i++) { + mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, data[i]); + dprintk(3, "API Input %d = %d\n", i, data[i]); + } + for (; i < CX2341X_MBOX_MAX_DATA; i++) + mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, 0); + + flag |= 3; /* tell 'em we're done writing */ + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + /* wait for firmware to handle the API command */ + timeout = jiffies + msecs_to_jiffies(10); + for (;;) { + mc417_memory_read(dev, dev->cx23417_mailbox, &flag); + if (0 != (flag & 4)) + break; + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "ERROR: API Mailbox timeout\n"); + return -1; + } + udelay(10); + } + + /* read output values */ + for (i = 0; i < out; i++) { + mc417_memory_read(dev, dev->cx23417_mailbox + 4 + i, data + i); + dprintk(3, "API Output %d = %d\n", i, data[i]); + } + + mc417_memory_read(dev, dev->cx23417_mailbox + 2, &retval); + dprintk(3, "API result = %d\n", retval); + + flag = 0; + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + return retval; +} + +/* We don't need to call the API often, so using just one + * mailbox will probably suffice + */ +static int cx23885_api_cmd(struct cx23885_dev *dev, + u32 command, + u32 inputcnt, + u32 outputcnt, + ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list vargs; + int i, err; + + dprintk(3, "%s() cmds = 0x%08x\n", __func__, command); + + va_start(vargs, outputcnt); + for (i = 0; i < inputcnt; i++) + data[i] = va_arg(vargs, int); + + err = cx23885_mbox_func(dev, command, inputcnt, outputcnt, data); + for (i = 0; i < outputcnt; i++) { + int *vptr = va_arg(vargs, int *); + *vptr = data[i]; + } + va_end(vargs); + + return err; +} + +static int cx23885_find_mailbox(struct cx23885_dev *dev) +{ + u32 signature[4] = { + 0x12345678, 0x34567812, 0x56781234, 0x78123456 + }; + int signaturecnt = 0; + u32 value; + int i; + + dprintk(2, "%s()\n", __func__); + + for (i = 0; i < CX23885_FIRM_IMAGE_SIZE; i++) { + mc417_memory_read(dev, i, &value); + if (value == signature[signaturecnt]) + signaturecnt++; + else + signaturecnt = 0; + if (4 == signaturecnt) { + dprintk(1, "Mailbox signature found at 0x%x\n", i+1); + return i+1; + } + } + printk(KERN_ERR "Mailbox signature values not found!\n"); + return -1; +} + +static int cx23885_load_firmware(struct cx23885_dev *dev) +{ + static const unsigned char magic[8] = { + 0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa + }; + const struct firmware *firmware; + int i, retval = 0; + u32 value = 0; + u32 gpio_output = 0; + u32 gpio_value; + u32 checksum = 0; + u32 *dataptr; + + dprintk(2, "%s()\n", __func__); + + /* Save GPIO settings before reset of APU */ + retval |= mc417_memory_read(dev, 0x9020, &gpio_output); + retval |= mc417_memory_read(dev, 0x900C, &gpio_value); + + retval = mc417_register_write(dev, + IVTV_REG_VPU, 0xFFFFFFED); + retval |= mc417_register_write(dev, + IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); + retval |= mc417_register_write(dev, + IVTV_REG_ENC_SDRAM_REFRESH, 0x80000800); + retval |= mc417_register_write(dev, + IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); + retval |= mc417_register_write(dev, + IVTV_REG_APU, 0); + + if (retval != 0) { + printk(KERN_ERR "%s: Error with mc417_register_write\n", + __func__); + return -1; + } + + retval = request_firmware(&firmware, CX23885_FIRM_IMAGE_NAME, + &dev->pci->dev); + + if (retval != 0) { + printk(KERN_ERR + "ERROR: Hotplug firmware request failed (%s).\n", + CX23885_FIRM_IMAGE_NAME); + printk(KERN_ERR "Please fix your hotplug setup, the board will " + "not work without firmware loaded!\n"); + return -1; + } + + if (firmware->size != CX23885_FIRM_IMAGE_SIZE) { + printk(KERN_ERR "ERROR: Firmware size mismatch " + "(have %zd, expected %d)\n", + firmware->size, CX23885_FIRM_IMAGE_SIZE); + release_firmware(firmware); + return -1; + } + + if (0 != memcmp(firmware->data, magic, 8)) { + printk(KERN_ERR + "ERROR: Firmware magic mismatch, wrong file?\n"); + release_firmware(firmware); + return -1; + } + + /* transfer to the chip */ + dprintk(2, "Loading firmware ...\n"); + dataptr = (u32 *)firmware->data; + for (i = 0; i < (firmware->size >> 2); i++) { + value = *dataptr; + checksum += ~value; + if (mc417_memory_write(dev, i, value) != 0) { + printk(KERN_ERR "ERROR: Loading firmware failed!\n"); + release_firmware(firmware); + return -1; + } + dataptr++; + } + + /* read back to verify with the checksum */ + dprintk(1, "Verifying firmware ...\n"); + for (i--; i >= 0; i--) { + if (mc417_memory_read(dev, i, &value) != 0) { + printk(KERN_ERR "ERROR: Reading firmware failed!\n"); + release_firmware(firmware); + return -1; + } + checksum -= ~value; + } + if (checksum) { + printk(KERN_ERR + "ERROR: Firmware load failed (checksum mismatch).\n"); + release_firmware(firmware); + return -1; + } + release_firmware(firmware); + dprintk(1, "Firmware upload successful.\n"); + + retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS, + IVTV_CMD_HW_BLOCKS_RST); + + /* F/W power up disturbs the GPIOs, restore state */ + retval |= mc417_register_write(dev, 0x9020, gpio_output); + retval |= mc417_register_write(dev, 0x900C, gpio_value); + + retval |= mc417_register_read(dev, IVTV_REG_VPU, &value); + retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8); + + /* Hardcoded GPIO's here */ + retval |= mc417_register_write(dev, 0x9020, 0x4000); + retval |= mc417_register_write(dev, 0x900C, 0x4000); + + mc417_register_read(dev, 0x9020, &gpio_output); + mc417_register_read(dev, 0x900C, &gpio_value); + + if (retval < 0) + printk(KERN_ERR "%s: Error with mc417_register_write\n", + __func__); + return 0; +} + +void cx23885_417_check_encoder(struct cx23885_dev *dev) +{ + u32 status, seq; + + status = seq = 0; + cx23885_api_cmd(dev, CX2341X_ENC_GET_SEQ_END, 0, 2, &status, &seq); + dprintk(1, "%s() status = %d, seq = %d\n", __func__, status, seq); +} + +static void cx23885_codec_settings(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + /* Dynamically change the height based on video standard */ + if (dev->encodernorm.id & V4L2_STD_525_60) + dev->ts1.height = 480; + else + dev->ts1.height = 576; + + /* assign frame size */ + cx23885_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0, + dev->ts1.height, dev->ts1.width); + + dev->mpeg_params.width = dev->ts1.width; + dev->mpeg_params.height = dev->ts1.height; + dev->mpeg_params.is_50hz = + (dev->encodernorm.id & V4L2_STD_625_50) != 0; + + cx2341x_update(dev, cx23885_mbox_func, NULL, &dev->mpeg_params); + + cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 3, 1); + cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 4, 1); +} + +static int cx23885_initialize_codec(struct cx23885_dev *dev, int startencoder) +{ + int version; + int retval; + u32 i, data[7]; + + dprintk(1, "%s()\n", __func__); + + retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ + if (retval < 0) { + dprintk(2, "%s() PING OK\n", __func__); + retval = cx23885_load_firmware(dev); + if (retval < 0) { + printk(KERN_ERR "%s() f/w load failed\n", __func__); + return retval; + } + retval = cx23885_find_mailbox(dev); + if (retval < 0) { + printk(KERN_ERR "%s() mailbox < 0, error\n", + __func__); + return -1; + } + dev->cx23417_mailbox = retval; + retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); + if (retval < 0) { + printk(KERN_ERR + "ERROR: cx23417 firmware ping failed!\n"); + return -1; + } + retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1, + &version); + if (retval < 0) { + printk(KERN_ERR "ERROR: cx23417 firmware get encoder :" + "version failed!\n"); + return -1; + } + dprintk(1, "cx23417 firmware version is 0x%08x\n", version); + msleep(200); + } + + cx23885_codec_settings(dev); + msleep(60); + + cx23885_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0, + CX23885_FIELD1_SAA7115, CX23885_FIELD2_SAA7115); + cx23885_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0, + CX23885_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0); + + /* Setup to capture VBI */ + data[0] = 0x0001BD00; + data[1] = 1; /* frames per interrupt */ + data[2] = 4; /* total bufs */ + data[3] = 0x91559155; /* start codes */ + data[4] = 0x206080C0; /* stop codes */ + data[5] = 6; /* lines */ + data[6] = 64; /* BPL */ + + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_CONFIG, 7, 0, data[0], data[1], + data[2], data[3], data[4], data[5], data[6]); + + for (i = 2; i <= 24; i++) { + int valid; + + valid = ((i >= 19) && (i <= 21)); + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, i, + valid, 0 , 0, 0); + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, + i | 0x80000000, valid, 0, 0, 0); + } + + cx23885_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, CX23885_UNMUTE); + msleep(60); + + /* initialize the video input */ + cx23885_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); + msleep(60); + + /* Enable VIP style pixel invalidation so we work with scaled mode */ + mc417_memory_write(dev, 2120, 0x00000080); + + /* start capturing to the host interface */ + if (startencoder) { + cx23885_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, + CX23885_MPEG_CAPTURE, CX23885_RAW_BITS_NONE); + msleep(10); + } + + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int bb_buf_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx23885_fh *fh = q->priv_data; + + fh->dev->ts1.ts_packet_size = mpeglinesize; + fh->dev->ts1.ts_packet_count = mpeglines; + + *size = fh->dev->ts1.ts_packet_size * fh->dev->ts1.ts_packet_count; + *count = mpegbufs; + + return 0; +} + +static int bb_buf_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + return cx23885_buf_prepare(q, &fh->dev->ts1, + (struct cx23885_buffer *)vb, + field); +} + +static void bb_buf_queue(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct cx23885_fh *fh = q->priv_data; + cx23885_buf_queue(&fh->dev->ts1, (struct cx23885_buffer *)vb); +} + +static void bb_buf_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + cx23885_free_buffer(q, (struct cx23885_buffer *)vb); +} + +static struct videobuf_queue_ops cx23885_qops = { + .buf_setup = bb_buf_setup, + .buf_prepare = bb_buf_prepare, + .buf_queue = bb_buf_queue, + .buf_release = bb_buf_release, +}; + +/* ------------------------------------------------------------------ */ + +static const u32 *ctrl_classes[] = { + cx2341x_mpeg_ctrls, + NULL +}; + +static int cx23885_queryctrl(struct cx23885_dev *dev, + struct v4l2_queryctrl *qctrl) +{ + qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); + if (qctrl->id == 0) + return -EINVAL; + + /* MPEG V4L2 controls */ + if (cx2341x_ctrl_query(&dev->mpeg_params, qctrl)) + qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + + return 0; +} + +static int cx23885_querymenu(struct cx23885_dev *dev, + struct v4l2_querymenu *qmenu) +{ + struct v4l2_queryctrl qctrl; + + qctrl.id = qmenu->id; + cx23885_queryctrl(dev, &qctrl); + return v4l2_ctrl_query_menu(qmenu, &qctrl, + cx2341x_ctrl_get_menu(&dev->mpeg_params, qmenu->id)); +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + call_all(dev, core, g_std, id); + + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(cx23885_tvnorms); i++) + if (id & cx23885_tvnorms[i].id) + break; + if (i == ARRAY_SIZE(cx23885_tvnorms)) + return -EINVAL; + dev->encodernorm = cx23885_tvnorms[i]; + + /* Have the drier core notify the subdevices */ + mutex_lock(&dev->lock); + cx23885_set_tvnorm(dev, id); + mutex_unlock(&dev->lock); + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __func__); + return cx23885_enum_input(dev, i); +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + return cx23885_get_input(file, priv, i); +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + return cx23885_set_input(file, priv, i); +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + strcpy(t->name, "Television"); + call_all(dev, tuner, g_tuner, t); + + dprintk(1, "VIDIOC_G_TUNER: tuner type %d\n", t->type); + + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + + /* Update the A/V core */ + call_all(dev, tuner, s_tuner, t); + + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = dev->freq; + + call_all(dev, tuner, g_frequency, f); + + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + return cx23885_set_frequency(file, priv, f); +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_get_control(dev, ctl); +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_set_control(dev, ctl); +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_tsport *tsport = &dev->ts1; + + strlcpy(cap->driver, dev->name, sizeof(cap->driver)); + strlcpy(cap->card, cx23885_boards[tsport->dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + 0; + if (UNSET != dev->tuner_type) + cap->capabilities |= V4L2_CAP_TUNER; + + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index != 0) + return -EINVAL; + + strlcpy(f->description, "MPEG", sizeof(f->description)); + f->pixelformat = V4L2_PIX_FMT_MPEG; + + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.colorspace = 0; + f->fmt.pix.width = dev->ts1.width; + f->fmt.pix.height = dev->ts1.height; + f->fmt.pix.field = fh->mpegq.field; + dprintk(1, "VIDIOC_G_FMT: w: %d, h: %d, f: %d\n", + dev->ts1.width, dev->ts1.height, fh->mpegq.field); + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.colorspace = 0; + dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n", + dev->ts1.width, dev->ts1.height, fh->mpegq.field); + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.colorspace = 0; + dprintk(1, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n", + f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field); + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_reqbufs(&fh->mpegq, p); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_querybuf(&fh->mpegq, p); +} + +static int vidioc_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_qbuf(&fh->mpegq, p); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct cx23885_fh *fh = priv; + + return videobuf_dqbuf(&fh->mpegq, b, file->f_flags & O_NONBLOCK); +} + + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_streamon(&fh->mpegq); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_streamoff(&fh->mpegq); +} + +static int vidioc_g_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + return cx2341x_ext_ctrls(&dev->mpeg_params, 0, f, VIDIOC_G_EXT_CTRLS); +} + +static int vidioc_s_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + struct cx2341x_mpeg_params p; + int err; + + if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + + p = dev->mpeg_params; + err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_S_EXT_CTRLS); + + if (err == 0) { + err = cx2341x_update(dev, cx23885_mbox_func, + &dev->mpeg_params, &p); + dev->mpeg_params = p; + } + return err; +} + +static int vidioc_try_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + struct cx2341x_mpeg_params p; + int err; + + if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + + p = dev->mpeg_params; + err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_TRY_EXT_CTRLS); + return err; +} + +static int vidioc_log_status(struct file *file, void *priv) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + char name[32 + 2]; + + snprintf(name, sizeof(name), "%s/2", dev->name); + printk(KERN_INFO + "%s/2: ============ START LOG STATUS ============\n", + dev->name); + call_all(dev, core, log_status); + cx2341x_log_status(&dev->mpeg_params, name); + printk(KERN_INFO + "%s/2: ============= END LOG STATUS =============\n", + dev->name); + return 0; +} + +static int vidioc_querymenu(struct file *file, void *priv, + struct v4l2_querymenu *a) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + return cx23885_querymenu(dev, a); +} + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + return cx23885_queryctrl(dev, c); +} + +static int mpeg_open(struct file *file) +{ + struct cx23885_dev *dev = video_drvdata(file); + struct cx23885_fh *fh; + + dprintk(2, "%s()\n", __func__); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (!fh) + return -ENOMEM; + + file->private_data = fh; + fh->dev = dev; + + videobuf_queue_sg_init(&fh->mpegq, &cx23885_qops, + &dev->pci->dev, &dev->ts1.slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx23885_buffer), + fh, NULL); + return 0; +} + +static int mpeg_release(struct file *file) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + /* FIXME: Review this crap */ + /* Shut device down on last close */ + if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) { + if (atomic_dec_return(&dev->v4l_reader_count) == 0) { + /* stop mpeg capture */ + cx23885_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, + CX23885_END_NOW, CX23885_MPEG_CAPTURE, + CX23885_RAW_BITS_NONE); + + msleep(500); + cx23885_417_check_encoder(dev); + + cx23885_cancel_buffers(&fh->dev->ts1); + } + } + + if (fh->mpegq.streaming) + videobuf_streamoff(&fh->mpegq); + if (fh->mpegq.reading) + videobuf_read_stop(&fh->mpegq); + + videobuf_mmap_free(&fh->mpegq); + file->private_data = NULL; + kfree(fh); + + return 0; +} + +static ssize_t mpeg_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + /* Deal w/ A/V decoder * and mpeg encoder sync issues. */ + /* Start mpeg encoder on first read. */ + if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { + if (atomic_inc_return(&dev->v4l_reader_count) == 1) { + if (cx23885_initialize_codec(dev, 1) < 0) + return -EINVAL; + } + } + + return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0, + file->f_flags & O_NONBLOCK); +} + +static unsigned int mpeg_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s\n", __func__); + + return videobuf_poll_stream(file, &fh->mpegq, wait); +} + +static int mpeg_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + return videobuf_mmap_mapper(&fh->mpegq, vma); +} + +static struct v4l2_file_operations mpeg_fops = { + .owner = THIS_MODULE, + .open = mpeg_open, + .release = mpeg_release, + .read = mpeg_read, + .poll = mpeg_poll, + .mmap = mpeg_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { + .vidioc_querystd = vidioc_g_std, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, + .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, + .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, + .vidioc_log_status = vidioc_log_status, + .vidioc_querymenu = vidioc_querymenu, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_chip_ident = cx23885_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = cx23885_g_register, + .vidioc_s_register = cx23885_s_register, +#endif +}; + +static struct video_device cx23885_mpeg_template = { + .name = "cx23885", + .fops = &mpeg_fops, + .ioctl_ops = &mpeg_ioctl_ops, + .tvnorms = CX23885_NORMS, + .current_norm = V4L2_STD_NTSC_M, +}; + +void cx23885_417_unregister(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + if (dev->v4l_device) { + if (video_is_registered(dev->v4l_device)) + video_unregister_device(dev->v4l_device); + else + video_device_release(dev->v4l_device); + dev->v4l_device = NULL; + } +} + +static struct video_device *cx23885_video_dev_alloc( + struct cx23885_tsport *tsport, + struct pci_dev *pci, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + struct cx23885_dev *dev = tsport->dev; + + dprintk(1, "%s()\n", __func__); + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + snprintf(vfd->name, sizeof(vfd->name), "%s (%s)", + cx23885_boards[tsport->dev->board].name, type); + vfd->parent = &pci->dev; + vfd->release = video_device_release; + return vfd; +} + +int cx23885_417_register(struct cx23885_dev *dev) +{ + /* FIXME: Port1 hardcoded here */ + int err = -ENODEV; + struct cx23885_tsport *tsport = &dev->ts1; + + dprintk(1, "%s()\n", __func__); + + if (cx23885_boards[dev->board].portb != CX23885_MPEG_ENCODER) + return err; + + /* Set default TV standard */ + dev->encodernorm = cx23885_tvnorms[0]; + + if (dev->encodernorm.id & V4L2_STD_525_60) + tsport->height = 480; + else + tsport->height = 576; + + tsport->width = 720; + cx2341x_fill_defaults(&dev->mpeg_params); + + dev->mpeg_params.port = CX2341X_PORT_SERIAL; + + /* Allocate and initialize V4L video device */ + dev->v4l_device = cx23885_video_dev_alloc(tsport, + dev->pci, &cx23885_mpeg_template, "mpeg"); + video_set_drvdata(dev->v4l_device, dev); + err = video_register_device(dev->v4l_device, + VFL_TYPE_GRABBER, -1); + if (err < 0) { + printk(KERN_INFO "%s: can't register mpeg device\n", dev->name); + return err; + } + + printk(KERN_INFO "%s: registered device %s [mpeg]\n", + dev->name, video_device_node_name(dev->v4l_device)); + + /* ST: Configure the encoder paramaters, but don't begin + * encoding, this resolves an issue where the first time the + * encoder is started video can be choppy. + */ + cx23885_initialize_codec(dev, 0); + + return 0; +} + +MODULE_FIRMWARE(CX23885_FIRM_IMAGE_NAME); diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c new file mode 100644 index 00000000..c6c9bd58 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-alsa.c @@ -0,0 +1,537 @@ +/* + * + * Support for CX23885 analog audio capture + * + * (c) 2008 Mijhail Moreyra + * Adapted from cx88-alsa.c + * (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#include + + +#include "cx23885.h" +#include "cx23885-reg.h" + +#define AUDIO_SRAM_CHANNEL SRAM_CH07 + +#define dprintk(level, fmt, arg...) do { \ + if (audio_debug + 1 > level) \ + printk(KERN_INFO "%s: " fmt, chip->dev->name , ## arg); \ +} while(0) + +#define dprintk_core(level, fmt, arg...) if (audio_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, chip->dev->name , ## arg) + +/**************************************************************************** + Module global static vars + ****************************************************************************/ + +static unsigned int disable_analog_audio; +module_param(disable_analog_audio, int, 0644); +MODULE_PARM_DESC(disable_analog_audio, "disable analog audio ALSA driver"); + +static unsigned int audio_debug; +module_param(audio_debug, int, 0644); +MODULE_PARM_DESC(audio_debug, "enable debug messages [analog audio]"); + +/**************************************************************************** + Board specific funtions + ****************************************************************************/ + +/* Constants taken from cx88-reg.h */ +#define AUD_INT_DN_RISCI1 (1 << 0) +#define AUD_INT_UP_RISCI1 (1 << 1) +#define AUD_INT_RDS_DN_RISCI1 (1 << 2) +#define AUD_INT_DN_RISCI2 (1 << 4) /* yes, 3 is skipped */ +#define AUD_INT_UP_RISCI2 (1 << 5) +#define AUD_INT_RDS_DN_RISCI2 (1 << 6) +#define AUD_INT_DN_SYNC (1 << 12) +#define AUD_INT_UP_SYNC (1 << 13) +#define AUD_INT_RDS_DN_SYNC (1 << 14) +#define AUD_INT_OPC_ERR (1 << 16) +#define AUD_INT_BER_IRQ (1 << 20) +#define AUD_INT_MCHG_IRQ (1 << 21) +#define GP_COUNT_CONTROL_RESET 0x3 + +/* + * BOARD Specific: Sets audio DMA + */ + +static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip) +{ + struct cx23885_audio_buffer *buf = chip->buf; + struct cx23885_dev *dev = chip->dev; + struct sram_channel *audio_ch = + &dev->sram_channels[AUDIO_SRAM_CHANNEL]; + + dprintk(1, "%s()\n", __func__); + + /* Make sure RISC/FIFO are off before changing FIFO/RISC settings */ + cx_clear(AUD_INT_DMA_CTL, 0x11); + + /* setup fifo + format - out channel */ + cx23885_sram_channel_setup(chip->dev, audio_ch, buf->bpl, + buf->risc.dma); + + /* sets bpl size */ + cx_write(AUD_INT_A_LNGTH, buf->bpl); + + /* This is required to get good audio (1 seems to be ok) */ + cx_write(AUD_INT_A_MODE, 1); + + /* reset counter */ + cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET); + atomic_set(&chip->count, 0); + + dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d " + "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1, + chip->num_periods, buf->bpl * chip->num_periods); + + /* Enables corresponding bits at AUD_INT_STAT */ + cx_write(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI1); + + /* Clean any pending interrupt bits already set */ + cx_write(AUDIO_INT_INT_STAT, ~0); + + /* enable audio irqs */ + cx_set(PCI_INT_MSK, chip->dev->pci_irqmask | PCI_MSK_AUD_INT); + + /* start dma */ + cx_set(DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */ + cx_set(AUD_INT_DMA_CTL, 0x11); /* audio downstream FIFO and + RISC enable */ + if (audio_debug) + cx23885_sram_channel_dump(chip->dev, audio_ch); + + return 0; +} + +/* + * BOARD Specific: Resets audio DMA + */ +static int cx23885_stop_audio_dma(struct cx23885_audio_dev *chip) +{ + struct cx23885_dev *dev = chip->dev; + dprintk(1, "Stopping audio DMA\n"); + + /* stop dma */ + cx_clear(AUD_INT_DMA_CTL, 0x11); + + /* disable irqs */ + cx_clear(PCI_INT_MSK, PCI_MSK_AUD_INT); + cx_clear(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI1); + + if (audio_debug) + cx23885_sram_channel_dump(chip->dev, + &dev->sram_channels[AUDIO_SRAM_CHANNEL]); + + return 0; +} + +/* + * BOARD Specific: Handles audio IRQ + */ +int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask) +{ + struct cx23885_audio_dev *chip = dev->audio_dev; + + if (0 == (status & mask)) + return 0; + + cx_write(AUDIO_INT_INT_STAT, status); + + /* risc op code error */ + if (status & AUD_INT_OPC_ERR) { + printk(KERN_WARNING "%s/1: Audio risc op code error\n", + dev->name); + cx_clear(AUD_INT_DMA_CTL, 0x11); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[AUDIO_SRAM_CHANNEL]); + } + if (status & AUD_INT_DN_SYNC) { + dprintk(1, "Downstream sync error\n"); + cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET); + return 1; + } + /* risc1 downstream */ + if (status & AUD_INT_DN_RISCI1) { + atomic_set(&chip->count, cx_read(AUD_INT_A_GPCNT)); + snd_pcm_period_elapsed(chip->substream); + } + /* FIXME: Any other status should deserve a special handling? */ + + return 1; +} + +static int dsp_buffer_free(struct cx23885_audio_dev *chip) +{ + BUG_ON(!chip->dma_size); + + dprintk(2, "Freeing buffer\n"); + videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc); + videobuf_dma_free(chip->dma_risc); + btcx_riscmem_free(chip->pci, &chip->buf->risc); + kfree(chip->buf); + + chip->dma_risc = NULL; + chip->dma_size = 0; + + return 0; +} + +/**************************************************************************** + ALSA PCM Interface + ****************************************************************************/ + +/* + * Digital hardware definition + */ +#define DEFAULT_FIFO_SIZE 4096 + +static struct snd_pcm_hardware snd_cx23885_digital_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + /* Analog audio output will be full of clicks and pops if there + are not exactly four lines in the SRAM FIFO buffer. */ + .period_bytes_min = DEFAULT_FIFO_SIZE/4, + .period_bytes_max = DEFAULT_FIFO_SIZE/4, + .periods_min = 1, + .periods_max = 1024, + .buffer_bytes_max = (1024*1024), +}; + +/* + * audio pcm capture open callback + */ +static int snd_cx23885_pcm_open(struct snd_pcm_substream *substream) +{ + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int err; + + if (!chip) { + printk(KERN_ERR "BUG: cx23885 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + + err = snd_pcm_hw_constraint_pow2(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + goto _error; + + chip->substream = substream; + + runtime->hw = snd_cx23885_digital_hw; + + if (chip->dev->sram_channels[AUDIO_SRAM_CHANNEL].fifo_size != + DEFAULT_FIFO_SIZE) { + unsigned int bpl = chip->dev-> + sram_channels[AUDIO_SRAM_CHANNEL].fifo_size / 4; + bpl &= ~7; /* must be multiple of 8 */ + runtime->hw.period_bytes_min = bpl; + runtime->hw.period_bytes_max = bpl; + } + + return 0; +_error: + dprintk(1, "Error opening PCM!\n"); + return err; +} + +/* + * audio close callback + */ +static int snd_cx23885_close(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * hw_params callback + */ +static int snd_cx23885_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + struct videobuf_dmabuf *dma; + + struct cx23885_audio_buffer *buf; + int ret; + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + chip->period_size = params_period_bytes(hw_params); + chip->num_periods = params_periods(hw_params); + chip->dma_size = chip->period_size * params_periods(hw_params); + + BUG_ON(!chip->dma_size); + BUG_ON(chip->num_periods & (chip->num_periods-1)); + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (NULL == buf) + return -ENOMEM; + + buf->bpl = chip->period_size; + + dma = &buf->dma; + videobuf_dma_init(dma); + ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE, + (PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT)); + if (ret < 0) + goto error; + + ret = videobuf_dma_map(&chip->pci->dev, dma); + if (ret < 0) + goto error; + + ret = cx23885_risc_databuffer(chip->pci, &buf->risc, dma->sglist, + chip->period_size, chip->num_periods, 1); + if (ret < 0) + goto error; + + /* Loop back to start of program */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + chip->buf = buf; + chip->dma_risc = dma; + + substream->runtime->dma_area = chip->dma_risc->vaddr; + substream->runtime->dma_bytes = chip->dma_size; + substream->runtime->dma_addr = 0; + + return 0; + +error: + kfree(buf); + return ret; +} + +/* + * hw free callback + */ +static int snd_cx23885_hw_free(struct snd_pcm_substream *substream) +{ + + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + return 0; +} + +/* + * prepare callback + */ +static int snd_cx23885_prepare(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * trigger callback + */ +static int snd_cx23885_card_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + int err; + + /* Local interrupts are already disabled by ALSA */ + spin_lock(&chip->lock); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + err = cx23885_start_audio_dma(chip); + break; + case SNDRV_PCM_TRIGGER_STOP: + err = cx23885_stop_audio_dma(chip); + break; + default: + err = -EINVAL; + break; + } + + spin_unlock(&chip->lock); + + return err; +} + +/* + * pointer callback + */ +static snd_pcm_uframes_t snd_cx23885_pointer( + struct snd_pcm_substream *substream) +{ + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + u16 count; + + count = atomic_read(&chip->count); + + return runtime->period_size * (count & (runtime->periods-1)); +} + +/* + * page callback (needed for mmap) + */ +static struct page *snd_cx23885_page(struct snd_pcm_substream *substream, + unsigned long offset) +{ + void *pageptr = substream->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); +} + +/* + * operators + */ +static struct snd_pcm_ops snd_cx23885_pcm_ops = { + .open = snd_cx23885_pcm_open, + .close = snd_cx23885_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_cx23885_hw_params, + .hw_free = snd_cx23885_hw_free, + .prepare = snd_cx23885_prepare, + .trigger = snd_cx23885_card_trigger, + .pointer = snd_cx23885_pointer, + .page = snd_cx23885_page, +}; + +/* + * create a PCM device + */ +static int snd_cx23885_pcm(struct cx23885_audio_dev *chip, int device, + char *name) +{ + int err; + struct snd_pcm *pcm; + + err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm); + if (err < 0) + return err; + pcm->private_data = chip; + strcpy(pcm->name, name); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx23885_pcm_ops); + + return 0; +} + +/**************************************************************************** + Basic Flow for Sound Devices + ****************************************************************************/ + +/* + * Alsa Constructor - Component probe + */ + +struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev) +{ + struct snd_card *card; + struct cx23885_audio_dev *chip; + int err; + + if (disable_analog_audio) + return NULL; + + if (dev->sram_channels[AUDIO_SRAM_CHANNEL].cmds_start == 0) { + printk(KERN_WARNING "%s(): Missing SRAM channel configuration " + "for analog TV Audio\n", __func__); + return NULL; + } + + err = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, + THIS_MODULE, sizeof(struct cx23885_audio_dev), &card); + if (err < 0) + goto error; + + chip = (struct cx23885_audio_dev *) card->private_data; + chip->dev = dev; + chip->pci = dev->pci; + chip->card = card; + spin_lock_init(&chip->lock); + + snd_card_set_dev(card, &dev->pci->dev); + + err = snd_cx23885_pcm(chip, 0, "CX23885 Digital"); + if (err < 0) + goto error; + + strcpy(card->driver, "CX23885"); + sprintf(card->shortname, "Conexant CX23885"); + sprintf(card->longname, "%s at %s", card->shortname, dev->name); + + err = snd_card_register(card); + if (err < 0) + goto error; + + dprintk(0, "registered ALSA audio device\n"); + + return chip; + +error: + snd_card_free(card); + printk(KERN_ERR "%s(): Failed to register analog " + "audio adapter\n", __func__); + + return NULL; +} + +/* + * ALSA destructor + */ +void cx23885_audio_unregister(struct cx23885_dev *dev) +{ + struct cx23885_audio_dev *chip = dev->audio_dev; + + snd_card_free(chip->card); +} diff --git a/drivers/media/pci/cx23885/cx23885-av.c b/drivers/media/pci/cx23885/cx23885-av.c new file mode 100644 index 00000000..e958a01f --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-av.c @@ -0,0 +1,36 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * AV device support routines - non-input, non-vl42_subdev routines + * + * Copyright (C) 2010 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include "cx23885.h" +#include "cx23885-av.h" + +void cx23885_av_work_handler(struct work_struct *work) +{ + struct cx23885_dev *dev = + container_of(work, struct cx23885_dev, cx25840_work); + bool handled; + + v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine, + PCI_MSK_AV_CORE, &handled); + cx23885_irq_enable(dev, PCI_MSK_AV_CORE); +} diff --git a/drivers/media/pci/cx23885/cx23885-av.h b/drivers/media/pci/cx23885/cx23885-av.h new file mode 100644 index 00000000..d2915c3e --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-av.h @@ -0,0 +1,27 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * AV device support routines - non-input, non-vl42_subdev routines + * + * Copyright (C) 2010 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX23885_AV_H_ +#define _CX23885_AV_H_ +void cx23885_av_work_handler(struct work_struct *work); +#endif diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c new file mode 100644 index 00000000..7e923f8d --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -0,0 +1,1811 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "cx23885.h" +#include "tuner-xc2028.h" +#include "netup-eeprom.h" +#include "netup-init.h" +#include "altera-ci.h" +#include "xc4000.h" +#include "xc5000.h" +#include "cx23888-ir.h" + +static unsigned int netup_card_rev = 4; +module_param(netup_card_rev, int, 0644); +MODULE_PARM_DESC(netup_card_rev, + "NetUP Dual DVB-T/C CI card revision"); +static unsigned int enable_885_ir; +module_param(enable_885_ir, int, 0644); +MODULE_PARM_DESC(enable_885_ir, + "Enable integrated IR controller for supported\n" + "\t\t CX2388[57] boards that are wired for it:\n" + "\t\t\tHVR-1250 (reported safe)\n" + "\t\t\tTerraTec Cinergy T PCIe Dual (not well tested, appears to be safe)\n" + "\t\t\tTeVii S470 (reported unsafe)\n" + "\t\t This can cause an interrupt storm with some cards.\n" + "\t\t Default: 0 [Disabled]"); + +/* ------------------------------------------------------------------ */ +/* board config info */ + +struct cx23885_board cx23885_boards[] = { + [CX23885_BOARD_UNKNOWN] = { + .name = "UNKNOWN/GENERIC", + /* Ensure safe default for unknown boards */ + .clk_freq = 0, + .input = {{ + .type = CX23885_VMUX_COMPOSITE1, + .vmux = 0, + }, { + .type = CX23885_VMUX_COMPOSITE2, + .vmux = 1, + }, { + .type = CX23885_VMUX_COMPOSITE3, + .vmux = 2, + }, { + .type = CX23885_VMUX_COMPOSITE4, + .vmux = 3, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = { + .name = "Hauppauge WinTV-HVR1800lp", + .portc = CX23885_MPEG_DVB, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xff00, + }, { + .type = CX23885_VMUX_DEBUG, + .vmux = 0, + .gpio0 = 0xff01, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xff02, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xff02, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1800] = { + .name = "Hauppauge WinTV-HVR1800", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_ENCODER, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .tuner_bus = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1, + .amux = CX25840_AUDIO8, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + .gpio0 = 0, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1250] = { + .name = "Hauppauge WinTV-HVR1250", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, +#ifdef MT2131_NO_ANALOG_SUPPORT_YET + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .tuner_bus = 1, +#endif + .force_bff = 1, + .input = {{ +#ifdef MT2131_NO_ANALOG_SUPPORT_YET + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1, + .amux = CX25840_AUDIO8, + .gpio0 = 0xff00, + }, { +#endif + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + .gpio0 = 0xff02, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + .gpio0 = 0xff02, + } }, + }, + [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = { + .name = "DViCO FusionHDTV5 Express", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = { + .name = "Hauppauge WinTV-HVR1500Q", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1500] = { + .name = "Hauppauge WinTV-HVR1500", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, /* 0xc2 >> 1 */ + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .gpio0 = 0, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1200] = { + .name = "Hauppauge WinTV-HVR1200", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1700] = { + .name = "Hauppauge WinTV-HVR1700", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1400] = { + .name = "Hauppauge WinTV-HVR1400", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = { + .name = "DViCO FusionHDTV7 Dual Express", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = { + .name = "DViCO FusionHDTV DVB-T Dual Express", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = { + .name = "Leadtek Winfast PxDVR3200 H", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = { + .name = "Leadtek Winfast PxDVR3200 H XC4000", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_XC4000, + .tuner_addr = 0x61, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2 | + CX25840_NONE0_CH3, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE1, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_VIN7_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN8_CH3 | + CX25840_COMPONENT_ON, + } }, + }, + [CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = { + .name = "Compro VideoMate E650F", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_TBS_6920] = { + .name = "TurboSight TBS 6920", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_TEVII_S470] = { + .name = "TeVii S470", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_DVBWORLD_2005] = { + .name = "DVBWorld DVB-S2 2005", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = { + .ci_type = 1, + .name = "NetUP Dual DVB-S2 CI", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1270] = { + .name = "Hauppauge WinTV-HVR1270", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1275] = { + .name = "Hauppauge WinTV-HVR1275", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1255] = { + .name = "Hauppauge WinTV-HVR1255", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_ABSENT, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .force_bff = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1 | + CX25840_DIF_ON, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = { + .name = "Hauppauge WinTV-HVR1255", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_ABSENT, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .force_bff = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1 | + CX25840_DIF_ON, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1210] = { + .name = "Hauppauge WinTV-HVR1210", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_MYGICA_X8506] = { + .name = "Mygica X8506 DMB-TH", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .input = { + { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE2, + }, + { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE8, + }, + { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, + { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_COMPONENT_ON | + CX25840_VIN1_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN7_CH3, + }, + }, + }, + [CX23885_BOARD_MAGICPRO_PROHDTVE2] = { + .name = "Magic-Pro ProHDTV Extreme 2", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .input = { + { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE2, + }, + { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE8, + }, + { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, + { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_COMPONENT_ON | + CX25840_VIN1_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN7_CH3, + }, + }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1850] = { + .name = "Hauppauge WinTV-HVR1850", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_ENCODER, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_ABSENT, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .force_bff = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1 | + CX25840_DIF_ON, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + } }, + }, + [CX23885_BOARD_COMPRO_VIDEOMATE_E800] = { + .name = "Compro VideoMate E800", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1290] = { + .name = "Hauppauge WinTV-HVR1290", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_MYGICA_X8558PRO] = { + .name = "Mygica X8558 PRO DMB-TH", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = { + .name = "LEADTEK WinFast PxTV1200", + .porta = CX23885_ANALOG_VIDEO, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .tuner_bus = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2 | + CX25840_NONE0_CH3, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE1, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_VIN7_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN8_CH3 | + CX25840_COMPONENT_ON, + } }, + }, + [CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = { + .name = "GoTView X5 3D Hybrid", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x64, + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2, + .gpio0 = 0x02, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX23885_VMUX_COMPOSITE1, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + } }, + }, + [CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = { + .ci_type = 2, + .name = "NetUP Dual DVB-T/C-CI RF", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + .num_fds_portb = 2, + .num_fds_portc = 2, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x64, + .input = { { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE1, + } }, + }, + [CX23885_BOARD_MPX885] = { + .name = "MPX-885", + .porta = CX23885_ANALOG_VIDEO, + .input = {{ + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE1, + .amux = CX25840_AUDIO6, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE2, + .vmux = CX25840_COMPOSITE2, + .amux = CX25840_AUDIO6, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE3, + .vmux = CX25840_COMPOSITE3, + .amux = CX25840_AUDIO7, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE4, + .vmux = CX25840_COMPOSITE4, + .amux = CX25840_AUDIO7, + .gpio0 = 0, + } }, + }, + [CX23885_BOARD_MYGICA_X8507] = { + .name = "Mygica X8507", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .input = { + { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE2, + .amux = CX25840_AUDIO8, + }, + { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE8, + .amux = CX25840_AUDIO7, + }, + { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + .amux = CX25840_AUDIO7, + }, + { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_COMPONENT_ON | + CX25840_VIN1_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN7_CH3, + .amux = CX25840_AUDIO7, + }, + }, + }, + [CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = { + .name = "TerraTec Cinergy T PCIe Dual", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_TEVII_S471] = { + .name = "TeVii S471", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_PROF_8000] = { + .name = "Prof Revolution DVB-S2 8000", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR4400] = { + .name = "Hauppauge WinTV-HVR4400", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_AVERMEDIA_HC81R] = { + .name = "AVerTV Hybrid Express Slim HC81R", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, /* 0xc2 >> 1 */ + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2 | + CX25840_NONE0_CH3 | + CX25840_NONE1_CH3, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN8_CH1 | + CX25840_NONE_CH2 | + CX25840_VIN7_CH3 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO6, + }, { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_VIN1_CH1 | + CX25840_NONE_CH2 | + CX25840_NONE0_CH3 | + CX25840_NONE1_CH3, + .amux = CX25840_AUDIO6, + } }, + } +}; +const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); + +/* ------------------------------------------------------------------ */ +/* PCI subsystem IDs */ + +struct cx23885_subid cx23885_subids[] = { + { + .subvendor = 0x0070, + .subdevice = 0x3400, + .card = CX23885_BOARD_UNKNOWN, + }, { + .subvendor = 0x0070, + .subdevice = 0x7600, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800lp, + }, { + .subvendor = 0x0070, + .subdevice = 0x7800, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800, + }, { + .subvendor = 0x0070, + .subdevice = 0x7801, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800, + }, { + .subvendor = 0x0070, + .subdevice = 0x7809, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800, + }, { + .subvendor = 0x0070, + .subdevice = 0x7911, + .card = CX23885_BOARD_HAUPPAUGE_HVR1250, + }, { + .subvendor = 0x18ac, + .subdevice = 0xd500, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP, + }, { + .subvendor = 0x0070, + .subdevice = 0x7790, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, + }, { + .subvendor = 0x0070, + .subdevice = 0x7797, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, + }, { + .subvendor = 0x0070, + .subdevice = 0x7710, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500, + }, { + .subvendor = 0x0070, + .subdevice = 0x7717, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500, + }, { + .subvendor = 0x0070, + .subdevice = 0x71d1, + .card = CX23885_BOARD_HAUPPAUGE_HVR1200, + }, { + .subvendor = 0x0070, + .subdevice = 0x71d3, + .card = CX23885_BOARD_HAUPPAUGE_HVR1200, + }, { + .subvendor = 0x0070, + .subdevice = 0x8101, + .card = CX23885_BOARD_HAUPPAUGE_HVR1700, + }, { + .subvendor = 0x0070, + .subdevice = 0x8010, + .card = CX23885_BOARD_HAUPPAUGE_HVR1400, + }, { + .subvendor = 0x18ac, + .subdevice = 0xd618, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, + }, { + .subvendor = 0x18ac, + .subdevice = 0xdb78, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, + }, { + .subvendor = 0x107d, + .subdevice = 0x6681, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, + }, { + .subvendor = 0x107d, + .subdevice = 0x6f39, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000, + }, { + .subvendor = 0x185b, + .subdevice = 0xe800, + .card = CX23885_BOARD_COMPRO_VIDEOMATE_E650F, + }, { + .subvendor = 0x6920, + .subdevice = 0x8888, + .card = CX23885_BOARD_TBS_6920, + }, { + .subvendor = 0xd470, + .subdevice = 0x9022, + .card = CX23885_BOARD_TEVII_S470, + }, { + .subvendor = 0x0001, + .subdevice = 0x2005, + .card = CX23885_BOARD_DVBWORLD_2005, + }, { + .subvendor = 0x1b55, + .subdevice = 0x2a2c, + .card = CX23885_BOARD_NETUP_DUAL_DVBS2_CI, + }, { + .subvendor = 0x0070, + .subdevice = 0x2211, + .card = CX23885_BOARD_HAUPPAUGE_HVR1270, + }, { + .subvendor = 0x0070, + .subdevice = 0x2215, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, + .subdevice = 0x221d, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, + .subdevice = 0x2251, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255, + }, { + .subvendor = 0x0070, + .subdevice = 0x2259, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255_22111, + }, { + .subvendor = 0x0070, + .subdevice = 0x2291, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x2295, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x2299, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x229d, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { + .subvendor = 0x0070, + .subdevice = 0x22f0, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f1, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f2, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f3, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { + .subvendor = 0x0070, + .subdevice = 0x22f4, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f5, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { + .subvendor = 0x14f1, + .subdevice = 0x8651, + .card = CX23885_BOARD_MYGICA_X8506, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8657, + .card = CX23885_BOARD_MAGICPRO_PROHDTVE2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8541, + .card = CX23885_BOARD_HAUPPAUGE_HVR1850, + }, { + .subvendor = 0x1858, + .subdevice = 0xe800, + .card = CX23885_BOARD_COMPRO_VIDEOMATE_E800, + }, { + .subvendor = 0x0070, + .subdevice = 0x8551, + .card = CX23885_BOARD_HAUPPAUGE_HVR1290, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8578, + .card = CX23885_BOARD_MYGICA_X8558PRO, + }, { + .subvendor = 0x107d, + .subdevice = 0x6f22, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200, + }, { + .subvendor = 0x5654, + .subdevice = 0x2390, + .card = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID, + }, { + .subvendor = 0x1b55, + .subdevice = 0xe2e4, + .card = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8502, + .card = CX23885_BOARD_MYGICA_X8507, + }, { + .subvendor = 0x153b, + .subdevice = 0x117e, + .card = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL, + }, { + .subvendor = 0xd471, + .subdevice = 0x9022, + .card = CX23885_BOARD_TEVII_S471, + }, { + .subvendor = 0x8000, + .subdevice = 0x3034, + .card = CX23885_BOARD_PROF_8000, + }, { + .subvendor = 0x0070, + .subdevice = 0xc108, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc138, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc12a, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc1f8, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x1461, + .subdevice = 0xd939, + .card = CX23885_BOARD_AVERMEDIA_HC81R, + }, +}; +const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); + +void cx23885_card_list(struct cx23885_dev *dev) +{ + int i; + + if (0 == dev->pci->subsystem_vendor && + 0 == dev->pci->subsystem_device) { + printk(KERN_INFO + "%s: Board has no valid PCIe Subsystem ID and can't\n" + "%s: be autodetected. Pass card= insmod option\n" + "%s: to workaround that. Redirect complaints to the\n" + "%s: vendor of the TV card. Best regards,\n" + "%s: -- tux\n", + dev->name, dev->name, dev->name, dev->name, dev->name); + } else { + printk(KERN_INFO + "%s: Your board isn't known (yet) to the driver.\n" + "%s: Try to pick one of the existing card configs via\n" + "%s: card= insmod option. Updating to the latest\n" + "%s: version might help as well.\n", + dev->name, dev->name, dev->name, dev->name); + } + printk(KERN_INFO "%s: Here is a list of valid choices for the card= insmod option:\n", + dev->name); + for (i = 0; i < cx23885_bcount; i++) + printk(KERN_INFO "%s: card=%d -> %s\n", + dev->name, i, cx23885_boards[i].name); +} + +static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) +{ + struct tveeprom tv; + + tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, + eeprom_data); + + /* Make sure we support the board model */ + switch (tv.model) { + case 22001: + /* WinTV-HVR1270 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Blast */ + case 22009: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Blast */ + case 22011: + /* WinTV-HVR1270 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Recv */ + case 22019: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Recv */ + case 22021: + /* WinTV-HVR1275 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Recv */ + case 22029: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Recv */ + case 22101: + /* WinTV-HVR1270 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Blast */ + case 22109: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Blast */ + case 22111: + /* WinTV-HVR1270 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Recv */ + case 22119: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Recv */ + case 22121: + /* WinTV-HVR1275 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Recv */ + case 22129: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Recv */ + case 71009: + /* WinTV-HVR1200 (PCIe, Retail, full height) + * DVB-T and basic analog */ + case 71359: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71439: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71449: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71939: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71949: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71959: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71979: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71999: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 76601: + /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual + channel ATSC and MPEG2 HW Encoder */ + case 77001: + /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC + and Basic analog */ + case 77011: + /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC + and Basic analog */ + case 77041: + /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM + and Basic analog */ + case 77051: + /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM + and Basic analog */ + case 78011: + /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78501: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78521: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78531: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78631: + /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 79001: + /* WinTV-HVR1250 (PCIe, Retail, IR, full height, + ATSC and Basic analog */ + case 79101: + /* WinTV-HVR1250 (PCIe, Retail, IR, half height, + ATSC and Basic analog */ + case 79501: + /* WinTV-HVR1250 (PCIe, No IR, half height, + ATSC [at least] and Basic analog) */ + case 79561: + /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, + ATSC and Basic analog */ + case 79571: + /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, + ATSC and Basic analog */ + case 79671: + /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, + ATSC and Basic analog */ + case 80019: + /* WinTV-HVR1400 (Express Card, Retail, IR, + * DVB-T and Basic analog */ + case 81509: + /* WinTV-HVR1700 (PCIe, OEM, No IR, half height) + * DVB-T and MPEG2 HW Encoder */ + case 81519: + /* WinTV-HVR1700 (PCIe, OEM, No IR, full height) + * DVB-T and MPEG2 HW Encoder */ + break; + case 85021: + /* WinTV-HVR1850 (PCIe, Retail, 3.5mm in, IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + break; + case 85721: + /* WinTV-HVR1290 (PCIe, OEM, RCA in, IR, + Dual channel ATSC and Basic analog */ + break; + default: + printk(KERN_WARNING "%s: warning: " + "unknown hauppauge model #%d\n", + dev->name, tv.model); + break; + } + + printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n", + dev->name, tv.model); +} + +int cx23885_tuner_callback(void *priv, int component, int command, int arg) +{ + struct cx23885_tsport *port = priv; + struct cx23885_dev *dev = port->dev; + u32 bitmask = 0; + + if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH)) + return 0; + + if (command != 0) { + printk(KERN_ERR "%s(): Unknown command 0x%x.\n", + __func__, command); + return -EINVAL; + } + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: + /* Tuner Reset Command */ + bitmask = 0x04; + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + /* Two identical tuners on two different i2c buses, + * we need to reset the correct gpio. */ + if (port->nr == 1) + bitmask = 0x01; + else if (port->nr == 2) + bitmask = 0x04; + break; + case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: + /* Tuner Reset Command */ + bitmask = 0x02; + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_tuner_reset(dev, port->nr); + break; + case CX23885_BOARD_AVERMEDIA_HC81R: + /* XC3028L Reset Command */ + bitmask = 1 << 2; + break; + } + + if (bitmask) { + /* Drive the tuner into reset and back out */ + cx_clear(GP0_IO, bitmask); + mdelay(200); + cx_set(GP0_IO, bitmask); + } + + return 0; +} + +void cx23885_gpio_setup(struct cx23885_dev *dev) +{ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1250: + /* GPIO-0 cx24227 demodulator reset */ + cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500: + /* GPIO-0 cx24227 demodulator */ + /* GPIO-2 xc3028 tuner */ + + /* Put the parts into reset */ + cx_set(GP0_IO, 0x00050000); + cx_clear(GP0_IO, 0x00000005); + msleep(5); + + /* Bring the parts out of reset */ + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + /* GPIO-0 cx24227 demodulator reset */ + /* GPIO-2 xc5000 tuner reset */ + cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + /* GPIO-0 656_CLK */ + /* GPIO-1 656_D0 */ + /* GPIO-2 8295A Reset */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + /* GPIO-19 IR_RX */ + + /* CX23417 GPIO's */ + /* EIO15 Zilog Reset */ + /* EIO14 S5H1409/CX24227 Reset */ + mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1); + + /* Put the demod into reset and protect the eeprom */ + mc417_gpio_clear(dev, GPIO_15 | GPIO_14); + mdelay(100); + + /* Bring the demod and blaster out of reset */ + mc417_gpio_set(dev, GPIO_15 | GPIO_14); + mdelay(100); + + /* Force the TDA8295A into reset and back */ + cx23885_gpio_enable(dev, GPIO_2, 1); + cx23885_gpio_set(dev, GPIO_2); + mdelay(20); + cx23885_gpio_clear(dev, GPIO_2); + mdelay(20); + cx23885_gpio_set(dev, GPIO_2); + mdelay(20); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1200: + /* GPIO-0 tda10048 demodulator reset */ + /* GPIO-2 tda18271 tuner reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1700: + /* GPIO-0 TDA10048 demodulator reset */ + /* GPIO-2 TDA8295A Reset */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + + /* The following GPIO's are on the interna AVCore (cx25840) */ + /* GPIO-19 IR_RX */ + /* GPIO-20 IR_TX 416/DVBT Select */ + /* GPIO-21 IIS DAT */ + /* GPIO-22 IIS WCLK */ + /* GPIO-23 IIS BCLK */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + /* GPIO-0 Dibcom7000p demodulator reset */ + /* GPIO-2 xc3028L tuner reset */ + /* GPIO-13 LED */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + /* GPIO-0 xc5000 tuner reset i2c bus 0 */ + /* GPIO-1 s5h1409 demod reset i2c bus 0 */ + /* GPIO-2 xc5000 tuner reset i2c bus 1 */ + /* GPIO-3 s5h1409 demod reset i2c bus 0 */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x000f0000); + mdelay(20); + cx_clear(GP0_IO, 0x0000000f); + mdelay(20); + cx_set(GP0_IO, 0x000f000f); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + /* GPIO-0 portb xc3028 reset */ + /* GPIO-1 portb zl10353 reset */ + /* GPIO-2 portc xc3028 reset */ + /* GPIO-3 portc zl10353 reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x000f0000); + mdelay(20); + cx_clear(GP0_IO, 0x0000000f); + mdelay(20); + cx_set(GP0_IO, 0x000f000f); + break; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: + /* GPIO-2 xc3028 tuner reset */ + + /* The following GPIO's are on the internal AVCore (cx25840) */ + /* GPIO-? zl10353 demod reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00040000); + mdelay(20); + cx_clear(GP0_IO, 0x00000004); + mdelay(20); + cx_set(GP0_IO, 0x00040004); + break; + case CX23885_BOARD_TBS_6920: + case CX23885_BOARD_PROF_8000: + cx_write(MC417_CTL, 0x00000036); + cx_write(MC417_OEN, 0x00001000); + cx_set(MC417_RWD, 0x00000002); + mdelay(200); + cx_clear(MC417_RWD, 0x00000800); + mdelay(200); + cx_set(MC417_RWD, 0x00000800); + mdelay(200); + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + /* GPIO-0 INTA from CiMax1 + GPIO-1 INTB from CiMax2 + GPIO-2 reset chips + GPIO-3 to GPIO-10 data/addr for CA + GPIO-11 ~CS0 to CiMax1 + GPIO-12 ~CS1 to CiMax2 + GPIO-13 ADL0 load LSB addr + GPIO-14 ADL1 load MSB addr + GPIO-15 ~RDY from CiMax + GPIO-17 ~RD to CiMax + GPIO-18 ~WR to CiMax + */ + cx_set(GP0_IO, 0x00040000); /* GPIO as out */ + /* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */ + cx_clear(GP0_IO, 0x00030004); + mdelay(100);/* reset delay */ + cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */ + cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */ + /* GPIO-15 IN as ~ACK, rest as OUT */ + cx_write(MC417_OEN, 0x00001000); + /* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */ + cx_write(MC417_RWD, 0x0000c300); + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1210: + /* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */ + /* GPIO-6 I2C Gate which can isolate the demod from the bus */ + /* GPIO-9 Demod reset */ + + /* Put the parts into reset and back */ + cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1); + cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5); + cx23885_gpio_clear(dev, GPIO_9); + mdelay(20); + cx23885_gpio_set(dev, GPIO_9); + break; + case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + case CX23885_BOARD_MYGICA_X8507: + /* GPIO-0 (0)Analog / (1)Digital TV */ + /* GPIO-1 reset XC5000 */ + /* GPIO-2 reset LGS8GL5 / LGS8G75 */ + cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1); + cx23885_gpio_clear(dev, GPIO_1 | GPIO_2); + mdelay(100); + cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2); + mdelay(100); + break; + case CX23885_BOARD_MYGICA_X8558PRO: + /* GPIO-0 reset first ATBM8830 */ + /* GPIO-1 reset second ATBM8830 */ + cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); + cx23885_gpio_clear(dev, GPIO_0 | GPIO_1); + mdelay(100); + cx23885_gpio_set(dev, GPIO_0 | GPIO_1); + mdelay(100); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + /* GPIO-0 656_CLK */ + /* GPIO-1 656_D0 */ + /* GPIO-2 Wake# */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + /* GPIO-19 IR_RX */ + /* GPIO-20 C_IR_TX */ + /* GPIO-21 I2S DAT */ + /* GPIO-22 I2S WCLK */ + /* GPIO-23 I2S BCLK */ + /* ALT GPIO: EXP GPIO LATCH */ + + /* CX23417 GPIO's */ + /* GPIO-14 S5H1411/CX24228 Reset */ + /* GPIO-13 EEPROM write protect */ + mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1); + + /* Put the demod into reset and protect the eeprom */ + mc417_gpio_clear(dev, GPIO_14 | GPIO_13); + mdelay(100); + + /* Bring the demod out of reset */ + mc417_gpio_set(dev, GPIO_14); + mdelay(100); + + /* CX24228 GPIO */ + /* Connected to IF / Mux */ + break; + case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: + cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + /* GPIO-0 ~INT in + GPIO-1 TMS out + GPIO-2 ~reset chips out + GPIO-3 to GPIO-10 data/addr for CA in/out + GPIO-11 ~CS out + GPIO-12 ADDR out + GPIO-13 ~WR out + GPIO-14 ~RD out + GPIO-15 ~RDY in + GPIO-16 TCK out + GPIO-17 TDO in + GPIO-18 TDI out + */ + cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */ + /* GPIO-0 as INT, reset & TMS low */ + cx_clear(GP0_IO, 0x00010006); + mdelay(100);/* reset delay */ + cx_set(GP0_IO, 0x00000004); /* reset high */ + cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */ + /* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */ + cx_write(MC417_OEN, 0x00005000); + /* ~RD, ~WR high; ADDR low; ~CS high */ + cx_write(MC417_RWD, 0x00000d00); + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ + break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + /* GPIO-8 tda10071 demod reset */ + + /* Put the parts into reset and back */ + cx23885_gpio_enable(dev, GPIO_8, 1); + cx23885_gpio_clear(dev, GPIO_8); + mdelay(100); + cx23885_gpio_set(dev, GPIO_8); + mdelay(100); + break; + case CX23885_BOARD_AVERMEDIA_HC81R: + cx_clear(MC417_CTL, 1); + /* GPIO-0,1,2 setup direction as output */ + cx_set(GP0_IO, 0x00070000); + mdelay(10); + /* AF9013 demod reset */ + cx_set(GP0_IO, 0x00010001); + mdelay(10); + cx_clear(GP0_IO, 0x00010001); + mdelay(10); + cx_set(GP0_IO, 0x00010001); + mdelay(10); + /* demod tune? */ + cx_clear(GP0_IO, 0x00030003); + mdelay(10); + cx_set(GP0_IO, 0x00020002); + mdelay(10); + cx_set(GP0_IO, 0x00010001); + mdelay(10); + cx_clear(GP0_IO, 0x00020002); + /* XC3028L tuner reset */ + cx_set(GP0_IO, 0x00040004); + cx_clear(GP0_IO, 0x00040004); + cx_set(GP0_IO, 0x00040004); + mdelay(60); + break; + } +} + +int cx23885_ir_init(struct cx23885_dev *dev) +{ + static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = { + { + .flags = V4L2_SUBDEV_IO_PIN_INPUT, + .pin = CX23885_PIN_IR_RX_GPIO19, + .function = CX23885_PAD_IR_RX, + .value = 0, + .strength = CX25840_PIN_DRIVE_MEDIUM, + }, { + .flags = V4L2_SUBDEV_IO_PIN_OUTPUT, + .pin = CX23885_PIN_IR_TX_GPIO20, + .function = CX23885_PAD_IR_TX, + .value = 0, + .strength = CX25840_PIN_DRIVE_MEDIUM, + } + }; + const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg); + + static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = { + { + .flags = V4L2_SUBDEV_IO_PIN_INPUT, + .pin = CX23885_PIN_IR_RX_GPIO19, + .function = CX23885_PAD_IR_RX, + .value = 0, + .strength = CX25840_PIN_DRIVE_MEDIUM, + } + }; + const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg); + + struct v4l2_subdev_ir_parameters params; + int ret = 0; + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1210: + /* FIXME: Implement me */ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + ret = cx23888_ir_probe(dev); + if (ret) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR); + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rx_pin_cfg_count, ir_rx_pin_cfg); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + ret = cx23888_ir_probe(dev); + if (ret) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR); + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg); + /* + * For these boards we need to invert the Tx output via the + * IR controller to have the LED off while idle + */ + v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, ¶ms); + params.enable = false; + params.shutdown = false; + params.invert_level = true; + v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms); + params.shutdown = true; + v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms); + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_MYGICA_X8507: + if (!enable_885_ir) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); + if (dev->sd_ir == NULL) { + ret = -ENODEV; + break; + } + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rx_pin_cfg_count, ir_rx_pin_cfg); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1250: + if (!enable_885_ir) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); + if (dev->sd_ir == NULL) { + ret = -ENODEV; + break; + } + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + request_module("ir-kbd-i2c"); + break; + } + + return ret; +} + +void cx23885_ir_fini(struct cx23885_dev *dev) +{ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + cx23885_irq_remove(dev, PCI_MSK_IR); + cx23888_ir_remove(dev); + dev->sd_ir = NULL; + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_MYGICA_X8507: + cx23885_irq_remove(dev, PCI_MSK_AV_CORE); + /* sd_ir is a duplicate pointer to the AV Core, just clear it */ + dev->sd_ir = NULL; + break; + } +} + +static int netup_jtag_io(void *device, int tms, int tdi, int read_tdo) +{ + int data; + int tdo = 0; + struct cx23885_dev *dev = (struct cx23885_dev *)device; + /*TMS*/ + data = ((cx_read(GP0_IO)) & (~0x00000002)); + data |= (tms ? 0x00020002 : 0x00020000); + cx_write(GP0_IO, data); + + /*TDI*/ + data = ((cx_read(MC417_RWD)) & (~0x0000a000)); + data |= (tdi ? 0x00008000 : 0); + cx_write(MC417_RWD, data); + if (read_tdo) + tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/ + + cx_write(MC417_RWD, data | 0x00002000); + udelay(1); + /*TCK*/ + cx_write(MC417_RWD, data); + + return tdo; +} + +void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) +{ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + if (dev->sd_ir) + cx23885_irq_add_enable(dev, PCI_MSK_IR); + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_MYGICA_X8507: + if (dev->sd_ir) + cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE); + break; + } +} + +void cx23885_card_setup(struct cx23885_dev *dev) +{ + struct cx23885_tsport *ts1 = &dev->ts1; + struct cx23885_tsport *ts2 = &dev->ts2; + + static u8 eeprom[256]; + + if (dev->i2c_bus[0].i2c_rc == 0) { + dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; + tveeprom_read(&dev->i2c_bus[0].i2c_client, + eeprom, sizeof(eeprom)); + } + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1250: + if (dev->i2c_bus[0].i2c_rc == 0) { + if (eeprom[0x80] != 0x84) + hauppauge_eeprom(dev, eeprom+0xc0); + else + hauppauge_eeprom(dev, eeprom+0x80); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_HAUPPAUGE_HVR1400: + if (dev->i2c_bus[0].i2c_rc == 0) + hauppauge_eeprom(dev, eeprom+0x80); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_HAUPPAUGE_HVR4400: + if (dev->i2c_bus[0].i2c_rc == 0) + hauppauge_eeprom(dev, eeprom+0xc0); + break; + } + + switch (dev->board) { + case CX23885_BOARD_AVERMEDIA_HC81R: + /* Defaults for VID B */ + ts1->gen_ctrl_val = 0x4; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + /* Defaults for VID C */ + /* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */ + ts2->gen_ctrl_val = 0x10e; + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + /* break omitted intentionally */ + case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1800: + /* Defaults for VID B - Analog encoder */ + /* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */ + ts1->gen_ctrl_val = 0x10e; + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + + /* APB_TSVALERR_POL (active low)*/ + ts1->vld_misc_val = 0x2000; + ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc); + cx_write(0x130184, 0xc); + + /* Defaults for VID C */ + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_TBS_6920: + ts1->gen_ctrl_val = 0x4; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_TEVII_S471: + case CX23885_BOARD_DVBWORLD_2005: + case CX23885_BOARD_PROF_8000: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_MYGICA_X8558PRO: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: + default: + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + } + + /* Certain boards support analog, or require the avcore to be + * loaded, ensure this happens. + */ + switch (dev->board) { + case CX23885_BOARD_TEVII_S470: + /* Currently only enabled for the integrated IR controller */ + if (!enable_885_ir) + break; + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: + case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_MPX885: + case CX23885_BOARD_MYGICA_X8507: + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_AVERMEDIA_HC81R: + dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_bus[2].i2c_adap, + "cx25840", 0x88 >> 1, NULL); + if (dev->sd_cx25840) { + dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE; + v4l2_subdev_call(dev->sd_cx25840, core, load_fw); + } + break; + } + + /* AUX-PLL 27MHz CLK */ + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + netup_initialize(dev); + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + int ret; + const struct firmware *fw; + const char *filename = "dvb-netup-altera-01.fw"; + char *action = "configure"; + static struct netup_card_info cinfo; + struct altera_config netup_config = { + .dev = dev, + .action = action, + .jtag_io = netup_jtag_io, + }; + + netup_initialize(dev); + + netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); + if (netup_card_rev) + cinfo.rev = netup_card_rev; + + switch (cinfo.rev) { + case 0x4: + filename = "dvb-netup-altera-04.fw"; + break; + default: + filename = "dvb-netup-altera-01.fw"; + break; + } + printk(KERN_INFO "NetUP card rev=0x%x fw_filename=%s\n", + cinfo.rev, filename); + + ret = request_firmware(&fw, filename, &dev->pci->dev); + if (ret != 0) + printk(KERN_ERR "did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details " + "on firmware-problems.", filename); + else + altera_init(&netup_config, fw); + + release_firmware(fw); + break; + } + } +} + +/* ------------------------------------------------------------------ */ diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c new file mode 100644 index 00000000..268654ac --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-core.c @@ -0,0 +1,2232 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx23885.h" +#include "cimax2.h" +#include "altera-ci.h" +#include "cx23888-ir.h" +#include "cx23885-ir.h" +#include "cx23885-av.h" +#include "cx23885-input.h" + +MODULE_DESCRIPTION("Driver for cx23885 based TV cards"); +MODULE_AUTHOR("Steven Toth "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CX23885_VERSION); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +static unsigned int card[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +#define dprintk(level, fmt, arg...)\ + do { if (debug >= level)\ + printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ + } while (0) + +static unsigned int cx23885_devcount; + +#define NO_SYNC_LINE (-1U) + +/* FIXME, these allocations will change when + * analog arrives. The be reviewed. + * CX23887 Assumptions + * 1 line = 16 bytes of CDT + * cmds size = 80 + * cdt size = 16 * linesize + * iqsize = 64 + * maxlines = 6 + * + * Address Space: + * 0x00000000 0x00008fff FIFO clusters + * 0x00010000 0x000104af Channel Management Data Structures + * 0x000104b0 0x000104ff Free + * 0x00010500 0x000108bf 15 channels * iqsize + * 0x000108c0 0x000108ff Free + * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables + * 15 channels * (iqsize + (maxlines * linesize)) + * 0x00010ea0 0x00010xxx Free + */ + +static struct sram_channel cx23885_sram_channels[] = { + [SRAM_CH01] = { + .name = "VID A", + .cmds_start = 0x10000, + .ctrl_start = 0x10380, + .cdt = 0x104c0, + .fifo_start = 0x40, + .fifo_size = 0x2800, + .ptr1_reg = DMA1_PTR1, + .ptr2_reg = DMA1_PTR2, + .cnt1_reg = DMA1_CNT1, + .cnt2_reg = DMA1_CNT2, + }, + [SRAM_CH02] = { + .name = "ch2", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA2_PTR1, + .ptr2_reg = DMA2_PTR2, + .cnt1_reg = DMA2_CNT1, + .cnt2_reg = DMA2_CNT2, + }, + [SRAM_CH03] = { + .name = "TS1 B", + .cmds_start = 0x100A0, + .ctrl_start = 0x10400, + .cdt = 0x10580, + .fifo_start = 0x5000, + .fifo_size = 0x1000, + .ptr1_reg = DMA3_PTR1, + .ptr2_reg = DMA3_PTR2, + .cnt1_reg = DMA3_CNT1, + .cnt2_reg = DMA3_CNT2, + }, + [SRAM_CH04] = { + .name = "ch4", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA4_PTR1, + .ptr2_reg = DMA4_PTR2, + .cnt1_reg = DMA4_CNT1, + .cnt2_reg = DMA4_CNT2, + }, + [SRAM_CH05] = { + .name = "ch5", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + }, + [SRAM_CH06] = { + .name = "TS2 C", + .cmds_start = 0x10140, + .ctrl_start = 0x10440, + .cdt = 0x105e0, + .fifo_start = 0x6000, + .fifo_size = 0x1000, + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + }, + [SRAM_CH07] = { + .name = "TV Audio", + .cmds_start = 0x10190, + .ctrl_start = 0x10480, + .cdt = 0x10a00, + .fifo_start = 0x7000, + .fifo_size = 0x1000, + .ptr1_reg = DMA6_PTR1, + .ptr2_reg = DMA6_PTR2, + .cnt1_reg = DMA6_CNT1, + .cnt2_reg = DMA6_CNT2, + }, + [SRAM_CH08] = { + .name = "ch8", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA7_PTR1, + .ptr2_reg = DMA7_PTR2, + .cnt1_reg = DMA7_CNT1, + .cnt2_reg = DMA7_CNT2, + }, + [SRAM_CH09] = { + .name = "ch9", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA8_PTR1, + .ptr2_reg = DMA8_PTR2, + .cnt1_reg = DMA8_CNT1, + .cnt2_reg = DMA8_CNT2, + }, +}; + +static struct sram_channel cx23887_sram_channels[] = { + [SRAM_CH01] = { + .name = "VID A", + .cmds_start = 0x10000, + .ctrl_start = 0x105b0, + .cdt = 0x107b0, + .fifo_start = 0x40, + .fifo_size = 0x2800, + .ptr1_reg = DMA1_PTR1, + .ptr2_reg = DMA1_PTR2, + .cnt1_reg = DMA1_CNT1, + .cnt2_reg = DMA1_CNT2, + }, + [SRAM_CH02] = { + .name = "VID A (VBI)", + .cmds_start = 0x10050, + .ctrl_start = 0x105F0, + .cdt = 0x10810, + .fifo_start = 0x3000, + .fifo_size = 0x1000, + .ptr1_reg = DMA2_PTR1, + .ptr2_reg = DMA2_PTR2, + .cnt1_reg = DMA2_CNT1, + .cnt2_reg = DMA2_CNT2, + }, + [SRAM_CH03] = { + .name = "TS1 B", + .cmds_start = 0x100A0, + .ctrl_start = 0x10630, + .cdt = 0x10870, + .fifo_start = 0x5000, + .fifo_size = 0x1000, + .ptr1_reg = DMA3_PTR1, + .ptr2_reg = DMA3_PTR2, + .cnt1_reg = DMA3_CNT1, + .cnt2_reg = DMA3_CNT2, + }, + [SRAM_CH04] = { + .name = "ch4", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA4_PTR1, + .ptr2_reg = DMA4_PTR2, + .cnt1_reg = DMA4_CNT1, + .cnt2_reg = DMA4_CNT2, + }, + [SRAM_CH05] = { + .name = "ch5", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + }, + [SRAM_CH06] = { + .name = "TS2 C", + .cmds_start = 0x10140, + .ctrl_start = 0x10670, + .cdt = 0x108d0, + .fifo_start = 0x6000, + .fifo_size = 0x1000, + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + }, + [SRAM_CH07] = { + .name = "TV Audio", + .cmds_start = 0x10190, + .ctrl_start = 0x106B0, + .cdt = 0x10930, + .fifo_start = 0x7000, + .fifo_size = 0x1000, + .ptr1_reg = DMA6_PTR1, + .ptr2_reg = DMA6_PTR2, + .cnt1_reg = DMA6_CNT1, + .cnt2_reg = DMA6_CNT2, + }, + [SRAM_CH08] = { + .name = "ch8", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA7_PTR1, + .ptr2_reg = DMA7_PTR2, + .cnt1_reg = DMA7_CNT1, + .cnt2_reg = DMA7_CNT2, + }, + [SRAM_CH09] = { + .name = "ch9", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA8_PTR1, + .ptr2_reg = DMA8_PTR2, + .cnt1_reg = DMA8_CNT1, + .cnt2_reg = DMA8_CNT2, + }, +}; + +static void cx23885_irq_add(struct cx23885_dev *dev, u32 mask) +{ + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + dev->pci_irqmask |= mask; + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask) +{ + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + dev->pci_irqmask |= mask; + cx_set(PCI_INT_MSK, mask); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask) +{ + u32 v; + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + v = mask & dev->pci_irqmask; + if (v) + cx_set(PCI_INT_MSK, v); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +static inline void cx23885_irq_enable_all(struct cx23885_dev *dev) +{ + cx23885_irq_enable(dev, 0xffffffff); +} + +void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask) +{ + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + cx_clear(PCI_INT_MSK, mask); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +static inline void cx23885_irq_disable_all(struct cx23885_dev *dev) +{ + cx23885_irq_disable(dev, 0xffffffff); +} + +void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask) +{ + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + dev->pci_irqmask &= ~mask; + cx_clear(PCI_INT_MSK, mask); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +static u32 cx23885_irq_get_mask(struct cx23885_dev *dev) +{ + u32 v; + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + v = cx_read(PCI_INT_MSK); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); + return v; +} + +static int cx23885_risc_decode(u32 risc) +{ + static char *instr[16] = { + [RISC_SYNC >> 28] = "sync", + [RISC_WRITE >> 28] = "write", + [RISC_WRITEC >> 28] = "writec", + [RISC_READ >> 28] = "read", + [RISC_READC >> 28] = "readc", + [RISC_JUMP >> 28] = "jump", + [RISC_SKIP >> 28] = "skip", + [RISC_WRITERM >> 28] = "writerm", + [RISC_WRITECM >> 28] = "writecm", + [RISC_WRITECR >> 28] = "writecr", + }; + static int incr[16] = { + [RISC_WRITE >> 28] = 3, + [RISC_JUMP >> 28] = 3, + [RISC_SKIP >> 28] = 1, + [RISC_SYNC >> 28] = 1, + [RISC_WRITERM >> 28] = 3, + [RISC_WRITECM >> 28] = 3, + [RISC_WRITECR >> 28] = 4, + }; + static char *bits[] = { + "12", "13", "14", "resync", + "cnt0", "cnt1", "18", "19", + "20", "21", "22", "23", + "irq1", "irq2", "eol", "sol", + }; + int i; + + printk("0x%08x [ %s", risc, + instr[risc >> 28] ? instr[risc >> 28] : "INVALID"); + for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--) + if (risc & (1 << (i + 12))) + printk(" %s", bits[i]); + printk(" count=%d ]\n", risc & 0xfff); + return incr[risc >> 28] ? incr[risc >> 28] : 1; +} + +void cx23885_wakeup(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q, u32 count) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_buffer *buf; + int bc; + + for (bc = 0;; bc++) { + if (list_empty(&q->active)) + break; + buf = list_entry(q->active.next, + struct cx23885_buffer, vb.queue); + + /* count comes from the hw and is is 16bit wide -- + * this trick handles wrap-arounds correctly for + * up to 32767 buffers in flight... */ + if ((s16) (count - buf->count) < 0) + break; + + v4l2_get_timestamp(&buf->vb.ts); + dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i, + count, buf->count); + buf->vb.state = VIDEOBUF_DONE; + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); + } + if (list_empty(&q->active)) + del_timer(&q->timeout); + else + mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); + if (bc != 1) + printk(KERN_WARNING "%s: %d buffers handled (should be 1)\n", + __func__, bc); +} + +int cx23885_sram_channel_setup(struct cx23885_dev *dev, + struct sram_channel *ch, + unsigned int bpl, u32 risc) +{ + unsigned int i, lines; + u32 cdt; + + if (ch->cmds_start == 0) { + dprintk(1, "%s() Erasing channel [%s]\n", __func__, + ch->name); + cx_write(ch->ptr1_reg, 0); + cx_write(ch->ptr2_reg, 0); + cx_write(ch->cnt2_reg, 0); + cx_write(ch->cnt1_reg, 0); + return 0; + } else { + dprintk(1, "%s() Configuring channel [%s]\n", __func__, + ch->name); + } + + bpl = (bpl + 7) & ~7; /* alignment */ + cdt = ch->cdt; + lines = ch->fifo_size / bpl; + if (lines > 6) + lines = 6; + BUG_ON(lines < 2); + + cx_write(8 + 0, RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + cx_write(8 + 4, 8); + cx_write(8 + 8, 0); + + /* write CDT */ + for (i = 0; i < lines; i++) { + dprintk(2, "%s() 0x%08x <- 0x%08x\n", __func__, cdt + 16*i, + ch->fifo_start + bpl*i); + cx_write(cdt + 16*i, ch->fifo_start + bpl*i); + cx_write(cdt + 16*i + 4, 0); + cx_write(cdt + 16*i + 8, 0); + cx_write(cdt + 16*i + 12, 0); + } + + /* write CMDS */ + if (ch->jumponly) + cx_write(ch->cmds_start + 0, 8); + else + cx_write(ch->cmds_start + 0, risc); + cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */ + cx_write(ch->cmds_start + 8, cdt); + cx_write(ch->cmds_start + 12, (lines*16) >> 3); + cx_write(ch->cmds_start + 16, ch->ctrl_start); + if (ch->jumponly) + cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2)); + else + cx_write(ch->cmds_start + 20, 64 >> 2); + for (i = 24; i < 80; i += 4) + cx_write(ch->cmds_start + i, 0); + + /* fill registers */ + cx_write(ch->ptr1_reg, ch->fifo_start); + cx_write(ch->ptr2_reg, cdt); + cx_write(ch->cnt2_reg, (lines*16) >> 3); + cx_write(ch->cnt1_reg, (bpl >> 3) - 1); + + dprintk(2, "[bridge %d] sram setup %s: bpl=%d lines=%d\n", + dev->bridge, + ch->name, + bpl, + lines); + + return 0; +} + +void cx23885_sram_channel_dump(struct cx23885_dev *dev, + struct sram_channel *ch) +{ + static char *name[] = { + "init risc lo", + "init risc hi", + "cdt base", + "cdt size", + "iq base", + "iq size", + "risc pc lo", + "risc pc hi", + "iq wr ptr", + "iq rd ptr", + "cdt current", + "pci target lo", + "pci target hi", + "line / byte", + }; + u32 risc; + unsigned int i, j, n; + + printk(KERN_WARNING "%s: %s - dma channel status dump\n", + dev->name, ch->name); + for (i = 0; i < ARRAY_SIZE(name); i++) + printk(KERN_WARNING "%s: cmds: %-15s: 0x%08x\n", + dev->name, name[i], + cx_read(ch->cmds_start + 4*i)); + + for (i = 0; i < 4; i++) { + risc = cx_read(ch->cmds_start + 4 * (i + 14)); + printk(KERN_WARNING "%s: risc%d: ", dev->name, i); + cx23885_risc_decode(risc); + } + for (i = 0; i < (64 >> 2); i += n) { + risc = cx_read(ch->ctrl_start + 4 * i); + /* No consideration for bits 63-32 */ + + printk(KERN_WARNING "%s: (0x%08x) iq %x: ", dev->name, + ch->ctrl_start + 4 * i, i); + n = cx23885_risc_decode(risc); + for (j = 1; j < n; j++) { + risc = cx_read(ch->ctrl_start + 4 * (i + j)); + printk(KERN_WARNING "%s: iq %x: 0x%08x [ arg #%d ]\n", + dev->name, i+j, risc, j); + } + } + + printk(KERN_WARNING "%s: fifo: 0x%08x -> 0x%x\n", + dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size); + printk(KERN_WARNING "%s: ctrl: 0x%08x -> 0x%x\n", + dev->name, ch->ctrl_start, ch->ctrl_start + 6*16); + printk(KERN_WARNING "%s: ptr1_reg: 0x%08x\n", + dev->name, cx_read(ch->ptr1_reg)); + printk(KERN_WARNING "%s: ptr2_reg: 0x%08x\n", + dev->name, cx_read(ch->ptr2_reg)); + printk(KERN_WARNING "%s: cnt1_reg: 0x%08x\n", + dev->name, cx_read(ch->cnt1_reg)); + printk(KERN_WARNING "%s: cnt2_reg: 0x%08x\n", + dev->name, cx_read(ch->cnt2_reg)); +} + +static void cx23885_risc_disasm(struct cx23885_tsport *port, + struct btcx_riscmem *risc) +{ + struct cx23885_dev *dev = port->dev; + unsigned int i, j, n; + + printk(KERN_INFO "%s: risc disasm: %p [dma=0x%08lx]\n", + dev->name, risc->cpu, (unsigned long)risc->dma); + for (i = 0; i < (risc->size >> 2); i += n) { + printk(KERN_INFO "%s: %04d: ", dev->name, i); + n = cx23885_risc_decode(le32_to_cpu(risc->cpu[i])); + for (j = 1; j < n; j++) + printk(KERN_INFO "%s: %04d: 0x%08x [ arg #%d ]\n", + dev->name, i + j, risc->cpu[i + j], j); + if (risc->cpu[i] == cpu_to_le32(RISC_JUMP)) + break; + } +} + +static void cx23885_shutdown(struct cx23885_dev *dev) +{ + /* disable RISC controller */ + cx_write(DEV_CNTRL2, 0); + + /* Disable all IR activity */ + cx_write(IR_CNTRL_REG, 0); + + /* Disable Video A/B activity */ + cx_write(VID_A_DMA_CTL, 0); + cx_write(VID_B_DMA_CTL, 0); + cx_write(VID_C_DMA_CTL, 0); + + /* Disable Audio activity */ + cx_write(AUD_INT_DMA_CTL, 0); + cx_write(AUD_EXT_DMA_CTL, 0); + + /* Disable Serial port */ + cx_write(UART_CTL, 0); + + /* Disable Interrupts */ + cx23885_irq_disable_all(dev); + cx_write(VID_A_INT_MSK, 0); + cx_write(VID_B_INT_MSK, 0); + cx_write(VID_C_INT_MSK, 0); + cx_write(AUDIO_INT_INT_MSK, 0); + cx_write(AUDIO_EXT_INT_MSK, 0); + +} + +static void cx23885_reset(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + cx23885_shutdown(dev); + + cx_write(PCI_INT_STAT, 0xffffffff); + cx_write(VID_A_INT_STAT, 0xffffffff); + cx_write(VID_B_INT_STAT, 0xffffffff); + cx_write(VID_C_INT_STAT, 0xffffffff); + cx_write(AUDIO_INT_INT_STAT, 0xffffffff); + cx_write(AUDIO_EXT_INT_STAT, 0xffffffff); + cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000); + cx_write(PAD_CTRL, 0x00500300); + + mdelay(100); + + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01], + 720*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH03], + 188*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH04], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH05], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH06], + 188*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH07], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH08], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH09], 128, 0); + + cx23885_gpio_setup(dev); +} + + +static int cx23885_pci_quirks(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + /* The cx23885 bridge has a weird bug which causes NMI to be asserted + * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not + * occur on the cx23887 bridge. + */ + if (dev->bridge == CX23885_BRIDGE_885) + cx_clear(RDR_TLCTL0, 1 << 4); + + return 0; +} + +static int get_resources(struct cx23885_dev *dev) +{ + if (request_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0), + dev->name)) + return 0; + + printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n", + dev->name, (unsigned long long)pci_resource_start(dev->pci, 0)); + + return -EBUSY; +} + +static void cx23885_timeout(unsigned long data); +int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value); + +static int cx23885_init_tsport(struct cx23885_dev *dev, + struct cx23885_tsport *port, int portno) +{ + dprintk(1, "%s(portno=%d)\n", __func__, portno); + + /* Transport bus init dma queue - Common settings */ + port->dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */ + port->ts_int_msk_val = 0x1111; /* TS port bits for RISC */ + port->vld_misc_val = 0x0; + port->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4); + + spin_lock_init(&port->slock); + port->dev = dev; + port->nr = portno; + + INIT_LIST_HEAD(&port->mpegq.active); + INIT_LIST_HEAD(&port->mpegq.queued); + port->mpegq.timeout.function = cx23885_timeout; + port->mpegq.timeout.data = (unsigned long)port; + init_timer(&port->mpegq.timeout); + + mutex_init(&port->frontends.lock); + INIT_LIST_HEAD(&port->frontends.felist); + port->frontends.active_fe_id = 0; + + /* This should be hardcoded allow a single frontend + * attachment to this tsport, keeping the -dvb.c + * code clean and safe. + */ + if (!port->num_frontends) + port->num_frontends = 1; + + switch (portno) { + case 1: + port->reg_gpcnt = VID_B_GPCNT; + port->reg_gpcnt_ctl = VID_B_GPCNT_CTL; + port->reg_dma_ctl = VID_B_DMA_CTL; + port->reg_lngth = VID_B_LNGTH; + port->reg_hw_sop_ctrl = VID_B_HW_SOP_CTL; + port->reg_gen_ctrl = VID_B_GEN_CTL; + port->reg_bd_pkt_status = VID_B_BD_PKT_STATUS; + port->reg_sop_status = VID_B_SOP_STATUS; + port->reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT; + port->reg_vld_misc = VID_B_VLD_MISC; + port->reg_ts_clk_en = VID_B_TS_CLK_EN; + port->reg_src_sel = VID_B_SRC_SEL; + port->reg_ts_int_msk = VID_B_INT_MSK; + port->reg_ts_int_stat = VID_B_INT_STAT; + port->sram_chno = SRAM_CH03; /* VID_B */ + port->pci_irqmask = 0x02; /* VID_B bit1 */ + break; + case 2: + port->reg_gpcnt = VID_C_GPCNT; + port->reg_gpcnt_ctl = VID_C_GPCNT_CTL; + port->reg_dma_ctl = VID_C_DMA_CTL; + port->reg_lngth = VID_C_LNGTH; + port->reg_hw_sop_ctrl = VID_C_HW_SOP_CTL; + port->reg_gen_ctrl = VID_C_GEN_CTL; + port->reg_bd_pkt_status = VID_C_BD_PKT_STATUS; + port->reg_sop_status = VID_C_SOP_STATUS; + port->reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT; + port->reg_vld_misc = VID_C_VLD_MISC; + port->reg_ts_clk_en = VID_C_TS_CLK_EN; + port->reg_src_sel = 0; + port->reg_ts_int_msk = VID_C_INT_MSK; + port->reg_ts_int_stat = VID_C_INT_STAT; + port->sram_chno = SRAM_CH06; /* VID_C */ + port->pci_irqmask = 0x04; /* VID_C bit2 */ + break; + default: + BUG(); + } + + cx23885_risc_stopper(dev->pci, &port->mpegq.stopper, + port->reg_dma_ctl, port->dma_ctl_val, 0x00); + + return 0; +} + +static void cx23885_dev_checkrevision(struct cx23885_dev *dev) +{ + switch (cx_read(RDR_CFG2) & 0xff) { + case 0x00: + /* cx23885 */ + dev->hwrevision = 0xa0; + break; + case 0x01: + /* CX23885-12Z */ + dev->hwrevision = 0xa1; + break; + case 0x02: + /* CX23885-13Z/14Z */ + dev->hwrevision = 0xb0; + break; + case 0x03: + if (dev->pci->device == 0x8880) { + /* CX23888-21Z/22Z */ + dev->hwrevision = 0xc0; + } else { + /* CX23885-14Z */ + dev->hwrevision = 0xa4; + } + break; + case 0x04: + if (dev->pci->device == 0x8880) { + /* CX23888-31Z */ + dev->hwrevision = 0xd0; + } else { + /* CX23885-15Z, CX23888-31Z */ + dev->hwrevision = 0xa5; + } + break; + case 0x0e: + /* CX23887-15Z */ + dev->hwrevision = 0xc0; + break; + case 0x0f: + /* CX23887-14Z */ + dev->hwrevision = 0xb1; + break; + default: + printk(KERN_ERR "%s() New hardware revision found 0x%x\n", + __func__, dev->hwrevision); + } + if (dev->hwrevision) + printk(KERN_INFO "%s() Hardware revision = 0x%02x\n", + __func__, dev->hwrevision); + else + printk(KERN_ERR "%s() Hardware revision unknown 0x%x\n", + __func__, dev->hwrevision); +} + +/* Find the first v4l2_subdev member of the group id in hw */ +struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw) +{ + struct v4l2_subdev *result = NULL; + struct v4l2_subdev *sd; + + spin_lock(&dev->v4l2_dev.lock); + v4l2_device_for_each_subdev(sd, &dev->v4l2_dev) { + if (sd->grp_id == hw) { + result = sd; + break; + } + } + spin_unlock(&dev->v4l2_dev.lock); + return result; +} + +static int cx23885_dev_setup(struct cx23885_dev *dev) +{ + int i; + + spin_lock_init(&dev->pci_irqmask_lock); + + mutex_init(&dev->lock); + mutex_init(&dev->gpio_lock); + + atomic_inc(&dev->refcount); + + dev->nr = cx23885_devcount++; + sprintf(dev->name, "cx23885[%d]", dev->nr); + + /* Configure the internal memory */ + if (dev->pci->device == 0x8880) { + /* Could be 887 or 888, assume a default */ + dev->bridge = CX23885_BRIDGE_887; + /* Apply a sensible clock frequency for the PCIe bridge */ + dev->clk_freq = 25000000; + dev->sram_channels = cx23887_sram_channels; + } else + if (dev->pci->device == 0x8852) { + dev->bridge = CX23885_BRIDGE_885; + /* Apply a sensible clock frequency for the PCIe bridge */ + dev->clk_freq = 28000000; + dev->sram_channels = cx23885_sram_channels; + } else + BUG(); + + dprintk(1, "%s() Memory configured for PCIe bridge type %d\n", + __func__, dev->bridge); + + /* board config */ + dev->board = UNSET; + if (card[dev->nr] < cx23885_bcount) + dev->board = card[dev->nr]; + for (i = 0; UNSET == dev->board && i < cx23885_idcount; i++) + if (dev->pci->subsystem_vendor == cx23885_subids[i].subvendor && + dev->pci->subsystem_device == cx23885_subids[i].subdevice) + dev->board = cx23885_subids[i].card; + if (UNSET == dev->board) { + dev->board = CX23885_BOARD_UNKNOWN; + cx23885_card_list(dev); + } + + /* If the user specific a clk freq override, apply it */ + if (cx23885_boards[dev->board].clk_freq > 0) + dev->clk_freq = cx23885_boards[dev->board].clk_freq; + + dev->pci_bus = dev->pci->bus->number; + dev->pci_slot = PCI_SLOT(dev->pci->devfn); + cx23885_irq_add(dev, 0x001f00); + + /* External Master 1 Bus */ + dev->i2c_bus[0].nr = 0; + dev->i2c_bus[0].dev = dev; + dev->i2c_bus[0].reg_stat = I2C1_STAT; + dev->i2c_bus[0].reg_ctrl = I2C1_CTRL; + dev->i2c_bus[0].reg_addr = I2C1_ADDR; + dev->i2c_bus[0].reg_rdata = I2C1_RDATA; + dev->i2c_bus[0].reg_wdata = I2C1_WDATA; + dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */ + + /* External Master 2 Bus */ + dev->i2c_bus[1].nr = 1; + dev->i2c_bus[1].dev = dev; + dev->i2c_bus[1].reg_stat = I2C2_STAT; + dev->i2c_bus[1].reg_ctrl = I2C2_CTRL; + dev->i2c_bus[1].reg_addr = I2C2_ADDR; + dev->i2c_bus[1].reg_rdata = I2C2_RDATA; + dev->i2c_bus[1].reg_wdata = I2C2_WDATA; + dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */ + + /* Internal Master 3 Bus */ + dev->i2c_bus[2].nr = 2; + dev->i2c_bus[2].dev = dev; + dev->i2c_bus[2].reg_stat = I2C3_STAT; + dev->i2c_bus[2].reg_ctrl = I2C3_CTRL; + dev->i2c_bus[2].reg_addr = I2C3_ADDR; + dev->i2c_bus[2].reg_rdata = I2C3_RDATA; + dev->i2c_bus[2].reg_wdata = I2C3_WDATA; + dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */ + + if ((cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) || + (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)) + cx23885_init_tsport(dev, &dev->ts1, 1); + + if ((cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) || + (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)) + cx23885_init_tsport(dev, &dev->ts2, 2); + + if (get_resources(dev) < 0) { + printk(KERN_ERR "CORE %s No more PCIe resources for " + "subsystem: %04x:%04x\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device); + + cx23885_devcount--; + return -ENODEV; + } + + /* PCIe stuff */ + dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + dev->bmmio = (u8 __iomem *)dev->lmmio; + + printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device, cx23885_boards[dev->board].name, + dev->board, card[dev->nr] == dev->board ? + "insmod option" : "autodetected"); + + cx23885_pci_quirks(dev); + + /* Assume some sensible defaults */ + dev->tuner_type = cx23885_boards[dev->board].tuner_type; + dev->tuner_addr = cx23885_boards[dev->board].tuner_addr; + dev->tuner_bus = cx23885_boards[dev->board].tuner_bus; + dev->radio_type = cx23885_boards[dev->board].radio_type; + dev->radio_addr = cx23885_boards[dev->board].radio_addr; + + dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x tuner_bus = %d\n", + __func__, dev->tuner_type, dev->tuner_addr, dev->tuner_bus); + dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n", + __func__, dev->radio_type, dev->radio_addr); + + /* The cx23417 encoder has GPIO's that need to be initialised + * before DVB, so that demodulators and tuners are out of + * reset before DVB uses them. + */ + if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) || + (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)) + cx23885_mc417_init(dev); + + /* init hardware */ + cx23885_reset(dev); + + cx23885_i2c_register(&dev->i2c_bus[0]); + cx23885_i2c_register(&dev->i2c_bus[1]); + cx23885_i2c_register(&dev->i2c_bus[2]); + cx23885_card_setup(dev); + call_all(dev, core, s_power, 0); + cx23885_ir_init(dev); + + if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { + if (cx23885_video_register(dev) < 0) { + printk(KERN_ERR "%s() Failed to register analog " + "video adapters on VID_A\n", __func__); + } + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { + if (cx23885_boards[dev->board].num_fds_portb) + dev->ts1.num_frontends = + cx23885_boards[dev->board].num_fds_portb; + if (cx23885_dvb_register(&dev->ts1) < 0) { + printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n", + __func__); + } + } else + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { + if (cx23885_417_register(dev) < 0) { + printk(KERN_ERR + "%s() Failed to register 417 on VID_B\n", + __func__); + } + } + + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { + if (cx23885_boards[dev->board].num_fds_portc) + dev->ts2.num_frontends = + cx23885_boards[dev->board].num_fds_portc; + if (cx23885_dvb_register(&dev->ts2) < 0) { + printk(KERN_ERR + "%s() Failed to register dvb on VID_C\n", + __func__); + } + } else + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) { + if (cx23885_417_register(dev) < 0) { + printk(KERN_ERR + "%s() Failed to register 417 on VID_C\n", + __func__); + } + } + + cx23885_dev_checkrevision(dev); + + /* disable MSI for NetUP cards, otherwise CI is not working */ + if (cx23885_boards[dev->board].ci_type > 0) + cx_clear(RDR_RDRCTL1, 1 << 8); + + switch (dev->board) { + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_TEVII_S471: + cx_clear(RDR_RDRCTL1, 1 << 8); + break; + } + + return 0; +} + +static void cx23885_dev_unregister(struct cx23885_dev *dev) +{ + release_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + if (!atomic_dec_and_test(&dev->refcount)) + return; + + if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) + cx23885_video_unregister(dev); + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + cx23885_dvb_unregister(&dev->ts1); + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_417_unregister(dev); + + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + cx23885_dvb_unregister(&dev->ts2); + + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) + cx23885_417_unregister(dev); + + cx23885_i2c_unregister(&dev->i2c_bus[2]); + cx23885_i2c_unregister(&dev->i2c_bus[1]); + cx23885_i2c_unregister(&dev->i2c_bus[0]); + + iounmap(dev->lmmio); +} + +static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, + unsigned int offset, u32 sync_line, + unsigned int bpl, unsigned int padding, + unsigned int lines, unsigned int lpi) +{ + struct scatterlist *sg; + unsigned int line, todo, sol; + + /* sync instruction */ + if (sync_line != NO_SYNC_LINE) + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + /* scan lines */ + sg = sglist; + for (line = 0; line < lines; line++) { + while (offset && offset >= sg_dma_len(sg)) { + offset -= sg_dma_len(sg); + sg++; + } + + if (lpi && line > 0 && !(line % lpi)) + sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC; + else + sol = RISC_SOL; + + if (bpl <= sg_dma_len(sg)-offset) { + /* fits into current chunk */ + *(rp++) = cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl); + *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += bpl; + } else { + /* scanline needs to be split */ + todo = bpl; + *(rp++) = cpu_to_le32(RISC_WRITE|sol| + (sg_dma_len(sg)-offset)); + *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + todo -= (sg_dma_len(sg)-offset); + offset = 0; + sg++; + while (todo > sg_dma_len(sg)) { + *(rp++) = cpu_to_le32(RISC_WRITE| + sg_dma_len(sg)); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + todo -= sg_dma_len(sg); + sg++; + } + *(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += todo; + } + offset += padding; + } + + return rp; +} + +int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, unsigned int top_offset, + unsigned int bottom_offset, unsigned int bpl, + unsigned int padding, unsigned int lines) +{ + u32 instructions, fields; + __le32 *rp; + int rc; + + fields = 0; + if (UNSET != top_offset) + fields++; + if (UNSET != bottom_offset) + fields++; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + /* write and jump need and extra dword */ + instructions = fields * (1 + ((bpl + padding) * lines) + / PAGE_SIZE + lines); + instructions += 2; + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + if (UNSET != top_offset) + rp = cx23885_risc_field(rp, sglist, top_offset, 0, + bpl, padding, lines, 0); + if (UNSET != bottom_offset) + rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200, + bpl, padding, lines, 0); + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} + +int cx23885_risc_databuffer(struct pci_dev *pci, + struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int bpl, + unsigned int lines, unsigned int lpi) +{ + u32 instructions; + __le32 *rp; + int rc; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Here + there is no padding and no sync. First DMA region may be smaller + than PAGE_SIZE */ + /* Jump and write need an extra dword */ + instructions = 1 + (bpl * lines) / PAGE_SIZE + lines; + instructions += 1; + + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE, + bpl, 0, lines, lpi); + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} + +int cx23885_risc_vbibuffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, unsigned int top_offset, + unsigned int bottom_offset, unsigned int bpl, + unsigned int padding, unsigned int lines) +{ + u32 instructions, fields; + __le32 *rp; + int rc; + + fields = 0; + if (UNSET != top_offset) + fields++; + if (UNSET != bottom_offset) + fields++; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + /* write and jump need and extra dword */ + instructions = fields * (1 + ((bpl + padding) * lines) + / PAGE_SIZE + lines); + instructions += 2; + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) + return rc; + /* write risc instructions */ + rp = risc->cpu; + + /* Sync to line 6, so US CC line 21 will appear in line '12' + * in the userland vbi payload */ + if (UNSET != top_offset) + rp = cx23885_risc_field(rp, sglist, top_offset, 6, + bpl, padding, lines, 0); + + if (UNSET != bottom_offset) + rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x207, + bpl, padding, lines, 0); + + + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} + + +int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value) +{ + __le32 *rp; + int rc; + + rc = btcx_riscmem_alloc(pci, risc, 4*16); + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + *(rp++) = cpu_to_le32(RISC_WRITECR | RISC_IRQ2); + *(rp++) = cpu_to_le32(reg); + *(rp++) = cpu_to_le32(value); + *(rp++) = cpu_to_le32(mask); + *(rp++) = cpu_to_le32(RISC_JUMP); + *(rp++) = cpu_to_le32(risc->dma); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + return 0; +} + +void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf) +{ + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + + BUG_ON(in_interrupt()); + videobuf_waiton(q, &buf->vb, 0, 0); + videobuf_dma_unmap(q->dev, dma); + videobuf_dma_free(dma); + btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static void cx23885_tsport_reg_dump(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + + dprintk(1, "%s() Register Dump\n", __func__); + dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __func__, + cx_read(DEV_CNTRL2)); + dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __func__, + cx23885_irq_get_mask(dev)); + dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __func__, + cx_read(AUDIO_INT_INT_MSK)); + dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __func__, + cx_read(AUD_INT_DMA_CTL)); + dprintk(1, "%s() AUD_EXT_INT_MSK 0x%08X\n", __func__, + cx_read(AUDIO_EXT_INT_MSK)); + dprintk(1, "%s() AUD_EXT_DMA_CTL 0x%08X\n", __func__, + cx_read(AUD_EXT_DMA_CTL)); + dprintk(1, "%s() PAD_CTRL 0x%08X\n", __func__, + cx_read(PAD_CTRL)); + dprintk(1, "%s() ALT_PIN_OUT_SEL 0x%08X\n", __func__, + cx_read(ALT_PIN_OUT_SEL)); + dprintk(1, "%s() GPIO2 0x%08X\n", __func__, + cx_read(GPIO2)); + dprintk(1, "%s() gpcnt(0x%08X) 0x%08X\n", __func__, + port->reg_gpcnt, cx_read(port->reg_gpcnt)); + dprintk(1, "%s() gpcnt_ctl(0x%08X) 0x%08x\n", __func__, + port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl)); + dprintk(1, "%s() dma_ctl(0x%08X) 0x%08x\n", __func__, + port->reg_dma_ctl, cx_read(port->reg_dma_ctl)); + if (port->reg_src_sel) + dprintk(1, "%s() src_sel(0x%08X) 0x%08x\n", __func__, + port->reg_src_sel, cx_read(port->reg_src_sel)); + dprintk(1, "%s() lngth(0x%08X) 0x%08x\n", __func__, + port->reg_lngth, cx_read(port->reg_lngth)); + dprintk(1, "%s() hw_sop_ctrl(0x%08X) 0x%08x\n", __func__, + port->reg_hw_sop_ctrl, cx_read(port->reg_hw_sop_ctrl)); + dprintk(1, "%s() gen_ctrl(0x%08X) 0x%08x\n", __func__, + port->reg_gen_ctrl, cx_read(port->reg_gen_ctrl)); + dprintk(1, "%s() bd_pkt_status(0x%08X) 0x%08x\n", __func__, + port->reg_bd_pkt_status, cx_read(port->reg_bd_pkt_status)); + dprintk(1, "%s() sop_status(0x%08X) 0x%08x\n", __func__, + port->reg_sop_status, cx_read(port->reg_sop_status)); + dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __func__, + port->reg_fifo_ovfl_stat, cx_read(port->reg_fifo_ovfl_stat)); + dprintk(1, "%s() vld_misc(0x%08X) 0x%08x\n", __func__, + port->reg_vld_misc, cx_read(port->reg_vld_misc)); + dprintk(1, "%s() ts_clk_en(0x%08X) 0x%08x\n", __func__, + port->reg_ts_clk_en, cx_read(port->reg_ts_clk_en)); + dprintk(1, "%s() ts_int_msk(0x%08X) 0x%08x\n", __func__, + port->reg_ts_int_msk, cx_read(port->reg_ts_int_msk)); +} + +static int cx23885_start_dma(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q, + struct cx23885_buffer *buf) +{ + struct cx23885_dev *dev = port->dev; + u32 reg; + + dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__, + buf->vb.width, buf->vb.height, buf->vb.field); + + /* Stop the fifo and risc engine for this port */ + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + + /* setup fifo + format */ + cx23885_sram_channel_setup(dev, + &dev->sram_channels[port->sram_chno], + port->ts_packet_size, buf->risc.dma); + if (debug > 5) { + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + cx23885_risc_disasm(port, &buf->risc); + } + + /* write TS length to chip */ + cx_write(port->reg_lngth, buf->vb.width); + + if ((!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) && + (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB))) { + printk("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n", + __func__, + cx23885_boards[dev->board].portb, + cx23885_boards[dev->board].portc); + return -EINVAL; + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 0); + + udelay(100); + + /* If the port supports SRC SELECT, configure it */ + if (port->reg_src_sel) + cx_write(port->reg_src_sel, port->src_sel_val); + + cx_write(port->reg_hw_sop_ctrl, port->hw_sop_ctrl_val); + cx_write(port->reg_ts_clk_en, port->ts_clk_en_val); + cx_write(port->reg_vld_misc, port->vld_misc_val); + cx_write(port->reg_gen_ctrl, port->gen_ctrl_val); + udelay(100); + + /* NOTE: this is 2 (reserved) for portb, does it matter? */ + /* reset counter to zero */ + cx_write(port->reg_gpcnt_ctl, 3); + q->count = 1; + + /* Set VIDB pins to input */ + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { + reg = cx_read(PAD_CTRL); + reg &= ~0x3; /* Clear TS1_OE & TS1_SOP_OE */ + cx_write(PAD_CTRL, reg); + } + + /* Set VIDC pins to input */ + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { + reg = cx_read(PAD_CTRL); + reg &= ~0x4; /* Clear TS2_SOP_OE */ + cx_write(PAD_CTRL, reg); + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { + + reg = cx_read(PAD_CTRL); + reg = reg & ~0x1; /* Clear TS1_OE */ + + /* FIXME, bit 2 writing here is questionable */ + /* set TS1_SOP_OE and TS1_OE_HI */ + reg = reg | 0xa; + cx_write(PAD_CTRL, reg); + + /* FIXME and these two registers should be documented. */ + cx_write(CLK_DELAY, cx_read(CLK_DELAY) | 0x80000011); + cx_write(ALT_PIN_OUT_SEL, 0x10100045); + } + + switch (dev->bridge) { + case CX23885_BRIDGE_885: + case CX23885_BRIDGE_887: + case CX23885_BRIDGE_888: + /* enable irqs */ + dprintk(1, "%s() enabling TS int's and DMA\n", __func__); + cx_set(port->reg_ts_int_msk, port->ts_int_msk_val); + cx_set(port->reg_dma_ctl, port->dma_ctl_val); + cx23885_irq_add(dev, port->pci_irqmask); + cx23885_irq_enable_all(dev); + break; + default: + BUG(); + } + + cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */ + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 1); + + if (debug > 4) + cx23885_tsport_reg_dump(port); + + return 0; +} + +static int cx23885_stop_dma(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + u32 reg; + + dprintk(1, "%s()\n", __func__); + + /* Stop interrupts and DMA */ + cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val); + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { + + reg = cx_read(PAD_CTRL); + + /* Set TS1_OE */ + reg = reg | 0x1; + + /* clear TS1_SOP_OE and TS1_OE_HI */ + reg = reg & ~0xa; + cx_write(PAD_CTRL, reg); + cx_write(port->reg_src_sel, 0); + cx_write(port->reg_gen_ctrl, 8); + + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 0); + + return 0; +} + +int cx23885_restart_queue(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_buffer *buf; + + dprintk(5, "%s()\n", __func__); + if (list_empty(&q->active)) { + struct cx23885_buffer *prev; + prev = NULL; + + dprintk(5, "%s() queue is empty\n", __func__); + + for (;;) { + if (list_empty(&q->queued)) + return 0; + buf = list_entry(q->queued.next, struct cx23885_buffer, + vb.queue); + if (NULL == prev) { + list_move_tail(&buf->vb.queue, &q->active); + cx23885_start_dma(port, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(5, "[%p/%d] restart_queue - f/active\n", + buf, buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_move_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + /* 64 bit bits 63-32 */ + prev->risc.jmp[2] = cpu_to_le32(0); + dprintk(5, "[%p/%d] restart_queue - m/active\n", + buf, buf->vb.i); + } else { + return 0; + } + prev = buf; + } + return 0; + } + + buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx23885_start_dma(port, q, buf); + list_for_each_entry(buf, &q->active, vb.queue) + buf->count = q->count++; + mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); + return 0; +} + +/* ------------------------------------------------------------------ */ + +int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port, + struct cx23885_buffer *buf, enum v4l2_field field) +{ + struct cx23885_dev *dev = port->dev; + int size = port->ts_packet_size * port->ts_packet_count; + int rc; + + dprintk(1, "%s: %p\n", __func__, buf); + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + buf->vb.width = port->ts_packet_size; + buf->vb.height = port->ts_packet_count; + buf->vb.size = size; + buf->vb.field = field /*V4L2_FIELD_TOP*/; + + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) + goto fail; + cx23885_risc_databuffer(dev->pci, &buf->risc, + videobuf_to_dma(&buf->vb)->sglist, + buf->vb.width, buf->vb.height, 0); + } + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx23885_free_buffer(q, buf); + return rc; +} + +void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) +{ + struct cx23885_buffer *prev; + struct cx23885_dev *dev = port->dev; + struct cx23885_dmaqueue *cx88q = &port->mpegq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(cx88q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + if (list_empty(&cx88q->active)) { + dprintk(1, "queue is empty - first active\n"); + list_add_tail(&buf->vb.queue, &cx88q->active); + cx23885_start_dma(port, cx88q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = cx88q->count++; + mod_timer(&cx88q->timeout, jiffies + BUFFER_TIMEOUT); + dprintk(1, "[%p/%d] %s - first active\n", + buf, buf->vb.i, __func__); + } else { + dprintk(1, "queue is not empty - append to active\n"); + prev = list_entry(cx88q->active.prev, struct cx23885_buffer, + vb.queue); + list_add_tail(&buf->vb.queue, &cx88q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = cx88q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */ + dprintk(1, "[%p/%d] %s - append to active\n", + buf, buf->vb.i, __func__); + } +} + +/* ----------------------------------------------------------- */ + +static void do_cancel_buffers(struct cx23885_tsport *port, char *reason, + int restart) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_dmaqueue *q = &port->mpegq; + struct cx23885_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&port->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx23885_buffer, + vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + dprintk(1, "[%p/%d] %s - dma=0x%08lx\n", + buf, buf->vb.i, reason, (unsigned long)buf->risc.dma); + } + if (restart) { + dprintk(1, "restarting queue\n"); + cx23885_restart_queue(port, q); + } + spin_unlock_irqrestore(&port->slock, flags); +} + +void cx23885_cancel_buffers(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_dmaqueue *q = &port->mpegq; + + dprintk(1, "%s()\n", __func__); + del_timer_sync(&q->timeout); + cx23885_stop_dma(port); + do_cancel_buffers(port, "cancel", 0); +} + +static void cx23885_timeout(unsigned long data) +{ + struct cx23885_tsport *port = (struct cx23885_tsport *)data; + struct cx23885_dev *dev = port->dev; + + dprintk(1, "%s()\n", __func__); + + if (debug > 5) + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + + cx23885_stop_dma(port); + do_cancel_buffers(port, "timeout", 1); +} + +int cx23885_irq_417(struct cx23885_dev *dev, u32 status) +{ + /* FIXME: port1 assumption here. */ + struct cx23885_tsport *port = &dev->ts1; + int count = 0; + int handled = 0; + + if (status == 0) + return handled; + + count = cx_read(port->reg_gpcnt); + dprintk(7, "status: 0x%08x mask: 0x%08x count: 0x%x\n", + status, cx_read(port->reg_ts_int_msk), count); + + if ((status & VID_B_MSK_BAD_PKT) || + (status & VID_B_MSK_OPC_ERR) || + (status & VID_B_MSK_VBI_OPC_ERR) || + (status & VID_B_MSK_SYNC) || + (status & VID_B_MSK_VBI_SYNC) || + (status & VID_B_MSK_OF) || + (status & VID_B_MSK_VBI_OF)) { + printk(KERN_ERR "%s: V4L mpeg risc op code error, status " + "= 0x%x\n", dev->name, status); + if (status & VID_B_MSK_BAD_PKT) + dprintk(1, " VID_B_MSK_BAD_PKT\n"); + if (status & VID_B_MSK_OPC_ERR) + dprintk(1, " VID_B_MSK_OPC_ERR\n"); + if (status & VID_B_MSK_VBI_OPC_ERR) + dprintk(1, " VID_B_MSK_VBI_OPC_ERR\n"); + if (status & VID_B_MSK_SYNC) + dprintk(1, " VID_B_MSK_SYNC\n"); + if (status & VID_B_MSK_VBI_SYNC) + dprintk(1, " VID_B_MSK_VBI_SYNC\n"); + if (status & VID_B_MSK_OF) + dprintk(1, " VID_B_MSK_OF\n"); + if (status & VID_B_MSK_VBI_OF) + dprintk(1, " VID_B_MSK_VBI_OF\n"); + + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + cx23885_417_check_encoder(dev); + } else if (status & VID_B_MSK_RISCI1) { + dprintk(7, " VID_B_MSK_RISCI1\n"); + spin_lock(&port->slock); + cx23885_wakeup(port, &port->mpegq, count); + spin_unlock(&port->slock); + } else if (status & VID_B_MSK_RISCI2) { + dprintk(7, " VID_B_MSK_RISCI2\n"); + spin_lock(&port->slock); + cx23885_restart_queue(port, &port->mpegq); + spin_unlock(&port->slock); + } + if (status) { + cx_write(port->reg_ts_int_stat, status); + handled = 1; + } + + return handled; +} + +static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status) +{ + struct cx23885_dev *dev = port->dev; + int handled = 0; + u32 count; + + if ((status & VID_BC_MSK_OPC_ERR) || + (status & VID_BC_MSK_BAD_PKT) || + (status & VID_BC_MSK_SYNC) || + (status & VID_BC_MSK_OF)) { + + if (status & VID_BC_MSK_OPC_ERR) + dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", + VID_BC_MSK_OPC_ERR); + + if (status & VID_BC_MSK_BAD_PKT) + dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", + VID_BC_MSK_BAD_PKT); + + if (status & VID_BC_MSK_SYNC) + dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", + VID_BC_MSK_SYNC); + + if (status & VID_BC_MSK_OF) + dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", + VID_BC_MSK_OF); + + printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); + + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + + } else if (status & VID_BC_MSK_RISCI1) { + + dprintk(7, " (RISCI1 0x%08x)\n", VID_BC_MSK_RISCI1); + + spin_lock(&port->slock); + count = cx_read(port->reg_gpcnt); + cx23885_wakeup(port, &port->mpegq, count); + spin_unlock(&port->slock); + + } else if (status & VID_BC_MSK_RISCI2) { + + dprintk(7, " (RISCI2 0x%08x)\n", VID_BC_MSK_RISCI2); + + spin_lock(&port->slock); + cx23885_restart_queue(port, &port->mpegq); + spin_unlock(&port->slock); + + } + if (status) { + cx_write(port->reg_ts_int_stat, status); + handled = 1; + } + + return handled; +} + +static irqreturn_t cx23885_irq(int irq, void *dev_id) +{ + struct cx23885_dev *dev = dev_id; + struct cx23885_tsport *ts1 = &dev->ts1; + struct cx23885_tsport *ts2 = &dev->ts2; + u32 pci_status, pci_mask; + u32 vida_status, vida_mask; + u32 audint_status, audint_mask; + u32 ts1_status, ts1_mask; + u32 ts2_status, ts2_mask; + int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0; + int audint_count = 0; + bool subdev_handled; + + pci_status = cx_read(PCI_INT_STAT); + pci_mask = cx23885_irq_get_mask(dev); + vida_status = cx_read(VID_A_INT_STAT); + vida_mask = cx_read(VID_A_INT_MSK); + audint_status = cx_read(AUDIO_INT_INT_STAT); + audint_mask = cx_read(AUDIO_INT_INT_MSK); + ts1_status = cx_read(VID_B_INT_STAT); + ts1_mask = cx_read(VID_B_INT_MSK); + ts2_status = cx_read(VID_C_INT_STAT); + ts2_mask = cx_read(VID_C_INT_MSK); + + if ((pci_status == 0) && (ts2_status == 0) && (ts1_status == 0)) + goto out; + + vida_count = cx_read(VID_A_GPCNT); + audint_count = cx_read(AUD_INT_A_GPCNT); + ts1_count = cx_read(ts1->reg_gpcnt); + ts2_count = cx_read(ts2->reg_gpcnt); + dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n", + pci_status, pci_mask); + dprintk(7, "vida_status: 0x%08x vida_mask: 0x%08x count: 0x%x\n", + vida_status, vida_mask, vida_count); + dprintk(7, "audint_status: 0x%08x audint_mask: 0x%08x count: 0x%x\n", + audint_status, audint_mask, audint_count); + dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n", + ts1_status, ts1_mask, ts1_count); + dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", + ts2_status, ts2_mask, ts2_count); + + if (pci_status & (PCI_MSK_RISC_RD | PCI_MSK_RISC_WR | + PCI_MSK_AL_RD | PCI_MSK_AL_WR | PCI_MSK_APB_DMA | + PCI_MSK_VID_C | PCI_MSK_VID_B | PCI_MSK_VID_A | + PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT | + PCI_MSK_GPIO0 | PCI_MSK_GPIO1 | + PCI_MSK_AV_CORE | PCI_MSK_IR)) { + + if (pci_status & PCI_MSK_RISC_RD) + dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", + PCI_MSK_RISC_RD); + + if (pci_status & PCI_MSK_RISC_WR) + dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", + PCI_MSK_RISC_WR); + + if (pci_status & PCI_MSK_AL_RD) + dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", + PCI_MSK_AL_RD); + + if (pci_status & PCI_MSK_AL_WR) + dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", + PCI_MSK_AL_WR); + + if (pci_status & PCI_MSK_APB_DMA) + dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", + PCI_MSK_APB_DMA); + + if (pci_status & PCI_MSK_VID_C) + dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", + PCI_MSK_VID_C); + + if (pci_status & PCI_MSK_VID_B) + dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", + PCI_MSK_VID_B); + + if (pci_status & PCI_MSK_VID_A) + dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", + PCI_MSK_VID_A); + + if (pci_status & PCI_MSK_AUD_INT) + dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", + PCI_MSK_AUD_INT); + + if (pci_status & PCI_MSK_AUD_EXT) + dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", + PCI_MSK_AUD_EXT); + + if (pci_status & PCI_MSK_GPIO0) + dprintk(7, " (PCI_MSK_GPIO0 0x%08x)\n", + PCI_MSK_GPIO0); + + if (pci_status & PCI_MSK_GPIO1) + dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n", + PCI_MSK_GPIO1); + + if (pci_status & PCI_MSK_AV_CORE) + dprintk(7, " (PCI_MSK_AV_CORE 0x%08x)\n", + PCI_MSK_AV_CORE); + + if (pci_status & PCI_MSK_IR) + dprintk(7, " (PCI_MSK_IR 0x%08x)\n", + PCI_MSK_IR); + } + + if (cx23885_boards[dev->board].ci_type == 1 && + (pci_status & (PCI_MSK_GPIO1 | PCI_MSK_GPIO0))) + handled += netup_ci_slot_status(dev, pci_status); + + if (cx23885_boards[dev->board].ci_type == 2 && + (pci_status & PCI_MSK_GPIO0)) + handled += altera_ci_irq(dev); + + if (ts1_status) { + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + handled += cx23885_irq_ts(ts1, ts1_status); + else + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + handled += cx23885_irq_417(dev, ts1_status); + } + + if (ts2_status) { + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + handled += cx23885_irq_ts(ts2, ts2_status); + else + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) + handled += cx23885_irq_417(dev, ts2_status); + } + + if (vida_status) + handled += cx23885_video_irq(dev, vida_status); + + if (audint_status) + handled += cx23885_audio_irq(dev, audint_status, audint_mask); + + if (pci_status & PCI_MSK_IR) { + subdev_handled = false; + v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine, + pci_status, &subdev_handled); + if (subdev_handled) + handled++; + } + + if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) { + cx23885_irq_disable(dev, PCI_MSK_AV_CORE); + if (!schedule_work(&dev->cx25840_work)) + printk(KERN_ERR "%s: failed to set up deferred work for" + " AV Core/IR interrupt. Interrupt is disabled" + " and won't be re-enabled\n", dev->name); + handled++; + } + + if (handled) + cx_write(PCI_INT_STAT, pci_status); +out: + return IRQ_RETVAL(handled); +} + +static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd, + unsigned int notification, void *arg) +{ + struct cx23885_dev *dev; + + if (sd == NULL) + return; + + dev = to_cx23885(sd->v4l2_dev); + + switch (notification) { + case V4L2_SUBDEV_IR_RX_NOTIFY: /* Possibly called in an IRQ context */ + if (sd == dev->sd_ir) + cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg); + break; + case V4L2_SUBDEV_IR_TX_NOTIFY: /* Possibly called in an IRQ context */ + if (sd == dev->sd_ir) + cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg); + break; + } +} + +static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev) +{ + INIT_WORK(&dev->cx25840_work, cx23885_av_work_handler); + INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler); + INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler); + dev->v4l2_dev.notify = cx23885_v4l2_dev_notify; +} + +static inline int encoder_on_portb(struct cx23885_dev *dev) +{ + return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER; +} + +static inline int encoder_on_portc(struct cx23885_dev *dev) +{ + return cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER; +} + +/* Mask represents 32 different GPIOs, GPIO's are split into multiple + * registers depending on the board configuration (and whether the + * 417 encoder (wi it's own GPIO's) are present. Each GPIO bit will + * be pushed into the correct hardware register, regardless of the + * physical location. Certain registers are shared so we sanity check + * and report errors if we think we're tampering with a GPIo that might + * be assigned to the encoder (and used for the host bus). + * + * GPIO 2 thru 0 - On the cx23885 bridge + * GPIO 18 thru 3 - On the cx23417 host bus interface + * GPIO 23 thru 19 - On the cx25840 a/v core + */ +void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask) +{ + if (mask & 0x7) + cx_set(GP0_IO, mask & 0x7); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Setting GPIO on encoder ports\n", + dev->name); + cx_set(MC417_RWD, (mask & 0x0007fff8) >> 3); + } + + /* TODO: 23-19 */ + if (mask & 0x00f80000) + printk(KERN_INFO "%s: Unsupported\n", dev->name); +} + +void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask) +{ + if (mask & 0x00000007) + cx_clear(GP0_IO, mask & 0x7); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Clearing GPIO moving on encoder ports\n", + dev->name); + cx_clear(MC417_RWD, (mask & 0x7fff8) >> 3); + } + + /* TODO: 23-19 */ + if (mask & 0x00f80000) + printk(KERN_INFO "%s: Unsupported\n", dev->name); +} + +u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask) +{ + if (mask & 0x00000007) + return (cx_read(GP0_IO) >> 8) & mask & 0x7; + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Reading GPIO moving on encoder ports\n", + dev->name); + return (cx_read(MC417_RWD) & ((mask & 0x7fff8) >> 3)) << 3; + } + + /* TODO: 23-19 */ + if (mask & 0x00f80000) + printk(KERN_INFO "%s: Unsupported\n", dev->name); + + return 0; +} + +void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput) +{ + if ((mask & 0x00000007) && asoutput) + cx_set(GP0_IO, (mask & 0x7) << 16); + else if ((mask & 0x00000007) && !asoutput) + cx_clear(GP0_IO, (mask & 0x7) << 16); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Enabling GPIO on encoder ports\n", + dev->name); + } + + /* MC417_OEN is active low for output, write 1 for an input */ + if ((mask & 0x0007fff8) && asoutput) + cx_clear(MC417_OEN, (mask & 0x7fff8) >> 3); + + else if ((mask & 0x0007fff8) && !asoutput) + cx_set(MC417_OEN, (mask & 0x7fff8) >> 3); + + /* TODO: 23-19 */ +} + +static int cx23885_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct cx23885_dev *dev; + int err; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev); + if (err < 0) + goto fail_free; + + /* Prepare to handle notifications from subdevices */ + cx23885_v4l2_dev_notify_init(dev); + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + goto fail_unreg; + } + + if (cx23885_dev_setup(dev) < 0) { + err = -EINVAL; + goto fail_unreg; + } + + /* print pci info */ + dev->pci_rev = pci_dev->revision; + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", dev->name, + pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat, + (unsigned long long)pci_resource_start(pci_dev, 0)); + + pci_set_master(pci_dev); + if (!pci_dma_supported(pci_dev, 0xffffffff)) { + printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); + err = -EIO; + goto fail_irq; + } + + err = request_irq(pci_dev->irq, cx23885_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, dev); + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d\n", + dev->name, pci_dev->irq); + goto fail_irq; + } + + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0); + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + cx23885_irq_add_enable(dev, PCI_MSK_GPIO0); + break; + } + + /* + * The CX2388[58] IR controller can start firing interrupts when + * enabled, so these have to take place after the cx23885_irq() handler + * is hooked up by the call to request_irq() above. + */ + cx23885_ir_pci_int_enable(dev); + cx23885_input_init(dev); + + return 0; + +fail_irq: + cx23885_dev_unregister(dev); +fail_unreg: + v4l2_device_unregister(&dev->v4l2_dev); +fail_free: + kfree(dev); + return err; +} + +static void cx23885_finidev(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct cx23885_dev *dev = to_cx23885(v4l2_dev); + + cx23885_input_fini(dev); + cx23885_ir_fini(dev); + + cx23885_shutdown(dev); + + pci_disable_device(pci_dev); + + /* unregister stuff */ + free_irq(pci_dev->irq, dev); + + cx23885_dev_unregister(dev); + v4l2_device_unregister(v4l2_dev); + kfree(dev); +} + +static struct pci_device_id cx23885_pci_tbl[] = { + { + /* CX23885 */ + .vendor = 0x14f1, + .device = 0x8852, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* CX23887 Rev 2 */ + .vendor = 0x14f1, + .device = 0x8880, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, cx23885_pci_tbl); + +static struct pci_driver cx23885_pci_driver = { + .name = "cx23885", + .id_table = cx23885_pci_tbl, + .probe = cx23885_initdev, + .remove = cx23885_finidev, + /* TODO */ + .suspend = NULL, + .resume = NULL, +}; + +static int __init cx23885_init(void) +{ + printk(KERN_INFO "cx23885 driver version %s loaded\n", + CX23885_VERSION); + return pci_register_driver(&cx23885_pci_driver); +} + +static void __exit cx23885_fini(void) +{ + pci_unregister_driver(&cx23885_pci_driver); +} + +module_init(cx23885_init); +module_exit(cx23885_fini); diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c new file mode 100644 index 00000000..bb291c66 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -0,0 +1,1452 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "cx23885.h" +#include + +#include "dvb_ca_en50221.h" +#include "s5h1409.h" +#include "s5h1411.h" +#include "mt2131.h" +#include "tda8290.h" +#include "tda18271.h" +#include "lgdt330x.h" +#include "xc4000.h" +#include "xc5000.h" +#include "max2165.h" +#include "tda10048.h" +#include "tuner-xc2028.h" +#include "tuner-simple.h" +#include "dib7000p.h" +#include "dibx000_common.h" +#include "zl10353.h" +#include "stv0900.h" +#include "stv0900_reg.h" +#include "stv6110.h" +#include "lnbh24.h" +#include "cx24116.h" +#include "cimax2.h" +#include "lgs8gxx.h" +#include "netup-eeprom.h" +#include "netup-init.h" +#include "lgdt3305.h" +#include "atbm8830.h" +#include "ts2020.h" +#include "ds3000.h" +#include "cx23885-f300.h" +#include "altera-ci.h" +#include "stv0367.h" +#include "drxk.h" +#include "mt2063.h" +#include "stv090x.h" +#include "stb6100.h" +#include "stb6100_cfg.h" +#include "tda10071.h" +#include "a8293.h" + +static unsigned int debug; + +#define dprintk(level, fmt, arg...)\ + do { if (debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) + +/* ------------------------------------------------------------------ */ + +static unsigned int alt_tuner; +module_param(alt_tuner, int, 0644); +MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* ------------------------------------------------------------------ */ + +static int dvb_buf_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx23885_tsport *port = q->priv_data; + + port->ts_packet_size = 188 * 4; + port->ts_packet_count = 32; + + *size = port->ts_packet_size * port->ts_packet_count; + *count = 32; + return 0; +} + +static int dvb_buf_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct cx23885_tsport *port = q->priv_data; + return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field); +} + +static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx23885_tsport *port = q->priv_data; + cx23885_buf_queue(port, (struct cx23885_buffer *)vb); +} + +static void dvb_buf_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + cx23885_free_buffer(q, (struct cx23885_buffer *)vb); +} + +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe); + +static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open) +{ + struct videobuf_dvb_frontends *f; + struct videobuf_dvb_frontend *fe; + + f = &port->frontends; + + if (f->gate <= 1) /* undefined or fe0 */ + fe = videobuf_dvb_get_frontend(f, 1); + else + fe = videobuf_dvb_get_frontend(f, f->gate); + + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); + + /* + * FIXME: Improve this path to avoid calling the + * cx23885_dvb_set_frontend() every time it passes here. + */ + cx23885_dvb_set_frontend(fe->dvb.frontend); +} + +static struct videobuf_queue_ops dvb_qops = { + .buf_setup = dvb_buf_setup, + .buf_prepare = dvb_buf_prepare, + .buf_queue = dvb_buf_queue, + .buf_release = dvb_buf_release, +}; + +static struct s5h1409_config hauppauge_generic_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct tda10048_config hauppauge_hvr1200_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3800, + .dtv8_if_freq_khz = TDA10048_IF_4300, + .clk_freq_khz = TDA10048_CLK_16000, +}; + +static struct tda10048_config hauppauge_hvr1210_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, +}; + +static struct s5h1409_config hauppauge_ezqam_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .qam_if = 4000, + .inversion = S5H1409_INVERSION_ON, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1409_config hauppauge_hvr1800lp_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1409_config hauppauge_hvr1500_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct mt2131_config hauppauge_generic_tunerconfig = { + 0x61 +}; + +static struct lgdt330x_config fusionhdtv_5_express = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, +}; + +static struct s5h1409_config hauppauge_hvr1500q_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1409_config dvico_s5h1409_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1411_config dvico_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1411_config hcw_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { + .i2c_address = 0x61, + .if_khz = 5380, +}; + +static struct xc5000_config dvico_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, +}; + +static struct tda829x_config tda829x_no_probe = { + .probe_tuner = TDA829X_DONT_PROBE, +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + +static struct tda18271_config hauppauge_tda18271_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct tda18271_config hauppauge_hvr1200_tuner_config = { + .std_map = &hauppauge_hvr1200_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct tda18271_config hauppauge_hvr1210_tuner_config = { + .gate = TDA18271_GATE_DIGITAL, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct tda18271_std_map hauppauge_hvr127x_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x58 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x58 }, +}; + +static struct tda18271_config hauppauge_hvr127x_config = { + .std_map = &hauppauge_hvr127x_std_map, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct lgdt3305_config hauppauge_lgdt3305_config = { + .i2c_addr = 0x0e, + .mpeg_mode = LGDT3305_MPEG_SERIAL, + .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .deny_i2c_rptr = 1, + .spectral_inversion = 1, + .qam_if_khz = 4000, + .vsb_if_khz = 3250, +}; + +static struct dibx000_agc_config xc3028_agc_config = { + BAND_VHF | BAND_UHF, /* band_caps */ + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, + * P_agc_nb_est=2, P_agc_write=0 + */ + (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | + (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ + + 712, /* inv_gain */ + 21, /* time_stabiliz */ + + 0, /* alpha_level */ + 118, /* thlock */ + + 0, /* wbd_inv */ + 2867, /* wbd_ref */ + 0, /* wbd_sel */ + 2, /* wbd_alpha */ + + 0, /* agc1_max */ + 0, /* agc1_min */ + 39718, /* agc2_max */ + 9930, /* agc2_min */ + 0, /* agc1_pt1 */ + 0, /* agc1_pt2 */ + 0, /* agc1_pt3 */ + 0, /* agc1_slope1 */ + 0, /* agc1_slope2 */ + 0, /* agc2_pt1 */ + 128, /* agc2_pt2 */ + 29, /* agc2_slope1 */ + 29, /* agc2_slope2 */ + + 17, /* alpha_mant */ + 27, /* alpha_exp */ + 23, /* beta_mant */ + 51, /* beta_exp */ + + 1, /* perform_agc_softsplit */ +}; + +/* PLL Configuration for COFDM BW_MHz = 8.000000 + * With external clock = 30.000000 */ +static struct dibx000_bandwidth_config xc3028_bw_config = { + 60000, /* internal */ + 30000, /* sampling */ + 1, /* pll_cfg: prediv */ + 8, /* pll_cfg: ratio */ + 3, /* pll_cfg: range */ + 1, /* pll_cfg: reset */ + 0, /* pll_cfg: bypass */ + 0, /* misc: refdiv */ + 0, /* misc: bypclk_div */ + 1, /* misc: IO_CLK_en_core */ + 1, /* misc: ADClkSrc */ + 0, /* misc: modulo */ + (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ + (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ + 20452225, /* timf */ + 30000000 /* xtal_hz */ +}; + +static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 0, + .update_lna = NULL, + + .agc_config_count = 1, + .agc = &xc3028_agc_config, + .bw = &xc3028_bw_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + .agc_control = NULL, + .spur_protect = 0, + + .output_mode = OUTMODE_MPEG2_SERIAL, +}; + +static struct zl10353_config dvico_fusionhdtv_xc3028 = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static struct stv0900_reg stv0900_ts_regs[] = { + { R0900_TSGENERAL, 0x00 }, + { R0900_P1_TSSPEED, 0x40 }, + { R0900_P2_TSSPEED, 0x40 }, + { R0900_P1_TSCFGM, 0xc0 }, + { R0900_P2_TSCFGM, 0xc0 }, + { R0900_P1_TSCFGH, 0xe0 }, + { R0900_P2_TSCFGH, 0xe0 }, + { R0900_P1_TSCFGL, 0x20 }, + { R0900_P2_TSCFGL, 0x20 }, + { 0xffff, 0xff }, /* terminate */ +}; + +static struct stv0900_config netup_stv0900_config = { + .demod_address = 0x68, + .demod_mode = 1, /* dual */ + .xtal = 8000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .ts_config_regs = stv0900_ts_regs, + .tun1_maddress = 0,/* 0x60 */ + .tun2_maddress = 3,/* 0x63 */ + .tun1_adc = 1,/* 1 Vpp */ + .tun2_adc = 1,/* 1 Vpp */ +}; + +static struct stv6110_config netup_stv6110_tunerconfig_a = { + .i2c_address = 0x60, + .mclk = 16000000, + .clk_div = 1, + .gain = 8, /* +16 dB - maximum gain */ +}; + +static struct stv6110_config netup_stv6110_tunerconfig_b = { + .i2c_address = 0x63, + .mclk = 16000000, + .clk_div = 1, + .gain = 8, /* +16 dB - maximum gain */ +}; + +static struct cx24116_config tbs_cx24116_config = { + .demod_address = 0x55, +}; + +static struct ds3000_config tevii_ds3000_config = { + .demod_address = 0x68, +}; + +static struct ts2020_config tevii_ts2020_config = { + .tuner_address = 0x60, + .clk_out_div = 1, +}; + +static struct cx24116_config dvbworld_cx24116_config = { + .demod_address = 0x05, +}; + +static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = { + .prod = LGS8GXX_PROD_LGS8GL5, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 5380, /* 5.38 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 0, + .if_neg_edge = 0, +}; + +static struct xc5000_config mygica_x8506_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 5380, +}; + +static struct stv090x_config prof_8000_stv090x_config = { + .device = STV0903, + .demod_mode = STV090x_SINGLE, + .clk_mode = STV090x_CLK_EXT, + .xtal = 27000000, + .address = 0x6A, + .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, + .repeater_level = STV090x_RPTLEVEL_64, + .adc1_range = STV090x_ADC_2Vpp, + .diseqc_envelope_mode = false, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, +}; + +static struct stb6100_config prof_8000_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + if (voltage == SEC_VOLTAGE_18) + cx_write(MC417_RWD, 0x00001e00); + else if (voltage == SEC_VOLTAGE_13) + cx_write(MC417_RWD, 0x00001a00); + else + cx_write(MC417_RWD, 0x00001800); + return 0; +} + +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1275: + switch (p->modulation) { + case VSB_8: + cx23885_gpio_clear(dev, GPIO_5); + break; + case QAM_64: + case QAM_256: + default: + cx23885_gpio_set(dev, GPIO_5); + break; + } + break; + case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + /* Select Digital TV */ + cx23885_gpio_set(dev, GPIO_0); + break; + } + return 0; +} + +static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = { + .prod = LGS8GXX_PROD_LGS8G75, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 6500, /* 6.50 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 1, + .adc_vpp = 2, /* 1.6 Vpp */ + .if_neg_edge = 1, +}; + +static struct xc5000_config magicpro_prohdtve2_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 6500, +}; + +static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = { + .prod = ATBM8830_PROD_8830, + .demod_address = 0x44, + .serial_ts = 0, + .ts_sampling_edge = 1, + .ts_clk_gated = 0, + .osc_clk_freq = 30400, /* in kHz */ + .if_freq = 0, /* zero IF */ + .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0xFF, + .agc_hold_loop = 0, +}; + +static struct max2165_config mygic_x8558pro_max2165_cfg1 = { + .i2c_address = 0x60, + .osc_clk = 20 +}; + +static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = { + .prod = ATBM8830_PROD_8830, + .demod_address = 0x44, + .serial_ts = 1, + .ts_sampling_edge = 1, + .ts_clk_gated = 0, + .osc_clk_freq = 30400, /* in kHz */ + .if_freq = 0, /* zero IF */ + .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0xFF, + .agc_hold_loop = 0, +}; + +static struct max2165_config mygic_x8558pro_max2165_cfg2 = { + .i2c_address = 0x60, + .osc_clk = 20 +}; +static struct stv0367_config netup_stv0367_config[] = { + { + .demod_address = 0x1c, + .xtal = 27000000, + .if_khz = 4500, + .if_iq_mode = 0, + .ts_mode = 1, + .clk_pol = 0, + }, { + .demod_address = 0x1d, + .xtal = 27000000, + .if_khz = 4500, + .if_iq_mode = 0, + .ts_mode = 1, + .clk_pol = 0, + }, +}; + +static struct xc5000_config netup_xc5000_config[] = { + { + .i2c_address = 0x61, + .if_khz = 4500, + }, { + .i2c_address = 0x64, + .if_khz = 4500, + }, +}; + +static struct drxk_config terratec_drxk_config[] = { + { + .adr = 0x29, + .no_i2c_bridge = 1, + }, { + .adr = 0x2a, + .no_i2c_bridge = 1, + }, +}; + +static struct mt2063_config terratec_mt2063_config[] = { + { + .tuner_address = 0x60, + }, { + .tuner_address = 0x67, + }, +}; + +static const struct tda10071_config hauppauge_tda10071_config = { + .demod_i2c_addr = 0x05, + .tuner_i2c_addr = 0x54, + .i2c_wr_max = 64, + .ts_mode = TDA10071_TS_SERIAL, + .spec_inv = 0, + .xtal = 40444000, /* 40.444 MHz */ + .pll_multiplier = 20, +}; + +static const struct a8293_config hauppauge_a8293_config = { + .i2c_addr = 0x0b, +}; + +static int netup_altera_fpga_rw(void *device, int flag, int data, int read) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)device; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + uint32_t mem = 0; + + mem = cx_read(MC417_RWD); + if (read) + cx_set(MC417_OEN, ALT_DATA); + else { + cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */ + mem &= ~ALT_DATA; + mem |= (data & ALT_DATA); + } + + if (flag) + mem |= ALT_AD_RG; + else + mem &= ~ALT_AD_RG; + + mem &= ~ALT_CS; + if (read) + mem = (mem & ~ALT_RD) | ALT_WR; + else + mem = (mem & ~ALT_WR) | ALT_RD; + + cx_write(MC417_RWD, mem); /* start RW cycle */ + + for (;;) { + mem = cx_read(MC417_RWD); + if ((mem & ALT_RDY) == 0) + break; + if (time_after(jiffies, timeout)) + break; + udelay(1); + } + + cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS); + if (read) + return mem & ALT_DATA; + + return 0; +}; + +static int dvb_register(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ + int ret; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); + if (!fe0) + return -EINVAL; + + /* init struct videobuf_dvb */ + fe0->dvb.name = dev->name; + + /* multi-frontend gate control is undefined or defaults to fe0 */ + port->frontends.gate = 0; + + /* Sets the gate control callback to be used by i2c command calls */ + port->gate_ctrl = cx23885_dvb_gate_ctrl; + + /* init frontend */ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1250: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_generic_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(mt2131_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_generic_tunerconfig, 0); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(lgdt3305_attach, + &hauppauge_lgdt3305_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr127x_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + } + + tda18271_attach(&dev->ts1.analog_fe, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + i2c_bus = &dev->i2c_bus[0]; + switch (alt_tuner) { + case 1: + fe0->dvb.frontend = + dvb_attach(s5h1409_attach, + &hauppauge_ezqam_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + } + break; + case 0: + default: + fe0->dvb.frontend = + dvb_attach(s5h1409_attach, + &hauppauge_generic_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(mt2131_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_generic_tunerconfig, 0); + break; + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_hvr1800lp_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(mt2131_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_generic_tunerconfig, 0); + } + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &fusionhdtv_5_express, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + i2c_bus = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_hvr1500q_config, + &dev->i2c_bus[0].i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(xc5000_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_hvr1500q_tunerconfig); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500: + i2c_bus = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_hvr1500_config, + &dev->i2c_bus[0].i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &i2c_bus->i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_OREN538, + }; + + fe = dvb_attach(xc2028_attach, + fe0->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1200_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1200_tuner_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1210: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1210_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1210_tuner_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(dib7000p_attach, + &i2c_bus->i2c_adap, + 0x12, &hauppauge_hvr1400_dib7000_config); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x64, + }; + static struct xc2028_ctrl ctl = { + .fname = XC3028L_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_DIBCOM52, + /* This is true for all demods with + v36 firmware? */ + .type = XC2028_D2633, + }; + + fe = dvb_attach(xc2028_attach, + fe0->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &dvico_s5h1409_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend == NULL) + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &dvico_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(xc5000_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &dvico_xc5000_tunerconfig); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &i2c_bus->i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + } + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc4000_config cfg = { + .i2c_address = 0x61, + .default_pm = 0, + .dvb_amplitude = 134, + .set_smoothedcvbs = 1, + .if_khz = 4560 + }; + + fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc4000 attach failed\n", + dev->name); + goto frontend_detach; + } + } + break; + case CX23885_BOARD_TBS_6920: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tbs_cx24116_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; + + break; + case CX23885_BOARD_TEVII_S470: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(ds3000_attach, + &tevii_ds3000_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(ts2020_attach, fe0->dvb.frontend, + &tevii_ts2020_config, &i2c_bus->i2c_adap); + fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; + } + + break; + case CX23885_BOARD_DVBWORLD_2005: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &dvbworld_cx24116_config, + &i2c_bus->i2c_adap); + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + i2c_bus = &dev->i2c_bus[0]; + switch (port->nr) { + /* port B */ + case 1: + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &netup_stv0900_config, + &i2c_bus->i2c_adap, 0); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(stv6110_attach, + fe0->dvb.frontend, + &netup_stv6110_tunerconfig_a, + &i2c_bus->i2c_adap)) { + if (!dvb_attach(lnbh24_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + LNBH24_PCL | LNBH24_TTX, + LNBH24_TEN, 0x09)) + printk(KERN_ERR + "No LNBH24 found!\n"); + + } + } + break; + /* port C */ + case 2: + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &netup_stv0900_config, + &i2c_bus->i2c_adap, 1); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(stv6110_attach, + fe0->dvb.frontend, + &netup_stv6110_tunerconfig_b, + &i2c_bus->i2c_adap)) { + if (!dvb_attach(lnbh24_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + LNBH24_PCL | LNBH24_TTX, + LNBH24_TEN, 0x0a)) + printk(KERN_ERR + "No LNBH24 found!\n"); + + } + } + break; + } + break; + case CX23885_BOARD_MYGICA_X8506: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &mygica_x8506_lgs8gl5_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &mygica_x8506_xc5000_config); + } + break; + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &magicpro_prohdtve2_lgs8g75_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &magicpro_prohdtve2_xc5000_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[0].i2c_adap, + &hauppauge_tda18271_config); + + tda18271_attach(&dev->ts1.analog_fe, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + + break; + case CX23885_BOARD_HAUPPAUGE_HVR1290: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[0].i2c_adap, + &hauppauge_tda18271_config); + break; + case CX23885_BOARD_MYGICA_X8558PRO: + switch (port->nr) { + /* port B */ + case 1: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(atbm8830_attach, + &mygica_x8558pro_atbm8830_cfg1, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(max2165_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &mygic_x8558pro_max2165_cfg1); + } + break; + /* port C */ + case 2: + i2c_bus = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(atbm8830_attach, + &mygica_x8558pro_atbm8830_cfg2, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(max2165_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &mygic_x8558pro_max2165_cfg2); + } + break; + } + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + i2c_bus = &dev->i2c_bus[0]; + mfe_shared = 1;/* MFE */ + port->frontends.gate = 0;/* not clear for me yet */ + /* ports B, C */ + /* MFE frontend 1 DVB-T */ + fe0->dvb.frontend = dvb_attach(stv0367ter_attach, + &netup_stv0367_config[port->nr - 1], + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (NULL == dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &netup_xc5000_config[port->nr - 1])) + goto frontend_detach; + /* load xc5000 firmware */ + fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend); + } + /* MFE frontend 2 */ + fe1 = videobuf_dvb_get_frontend(&port->frontends, 2); + if (fe1 == NULL) + goto frontend_detach; + /* DVB-C init */ + fe1->dvb.frontend = dvb_attach(stv0367cab_attach, + &netup_stv0367_config[port->nr - 1], + &i2c_bus->i2c_adap); + if (fe1->dvb.frontend != NULL) { + fe1->dvb.frontend->id = 1; + if (NULL == dvb_attach(xc5000_attach, + fe1->dvb.frontend, + &i2c_bus->i2c_adap, + &netup_xc5000_config[port->nr - 1])) + goto frontend_detach; + } + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + + switch (port->nr) { + /* port b */ + case 1: + fe0->dvb.frontend = dvb_attach(drxk_attach, + &terratec_drxk_config[0], + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(mt2063_attach, + fe0->dvb.frontend, + &terratec_mt2063_config[0], + &i2c_bus2->i2c_adap)) + goto frontend_detach; + } + break; + /* port c */ + case 2: + fe0->dvb.frontend = dvb_attach(drxk_attach, + &terratec_drxk_config[1], + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(mt2063_attach, + fe0->dvb.frontend, + &terratec_mt2063_config[1], + &i2c_bus2->i2c_adap)) + goto frontend_detach; + } + break; + } + break; + case CX23885_BOARD_TEVII_S471: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(ds3000_attach, + &tevii_ds3000_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(ts2020_attach, fe0->dvb.frontend, + &tevii_ts2020_config, &i2c_bus->i2c_adap); + } + break; + case CX23885_BOARD_PROF_8000: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(stv090x_attach, + &prof_8000_stv090x_config, + &i2c_bus->i2c_adap, + STV090x_DEMODULATOR_0); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6100_attach, + fe0->dvb.frontend, + &prof_8000_stb6100_config, + &i2c_bus->i2c_adap)) + goto frontend_detach; + + fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage; + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10071_attach, + &hauppauge_tda10071_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(a8293_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_a8293_config); + } + break; + default: + printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " + " isn't supported yet\n", + dev->name); + break; + } + + if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) { + printk(KERN_ERR "%s: frontend initialization failed\n", + dev->name); + goto frontend_detach; + } + + /* define general-purpose callback pointer */ + fe0->dvb.frontend->callback = cx23885_tuner_callback; + if (fe1) + fe1->dvb.frontend->callback = cx23885_tuner_callback; +#if 0 + /* Ensure all frontends negotiate bus access */ + fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; + if (fe1) + fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; +#endif + + /* Put the analog decoder in standby to keep it quiet */ + call_all(dev, core, s_power, 0); + + if (fe0->dvb.frontend->ops.analog_ops.standby) + fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend); + + /* register everything */ + ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, + &dev->pci->dev, adapter_nr, mfe_shared); + if (ret) + goto frontend_detach; + + /* init CI & MAC */ + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: { + static struct netup_card_info cinfo; + + netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); + memcpy(port->frontends.adapter.proposed_mac, + cinfo.port[port->nr - 1].mac, 6); + printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n", + port->nr, port->frontends.adapter.proposed_mac); + + netup_ci_init(port); + break; + } + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + struct altera_ci_config netup_ci_cfg = { + .dev = dev,/* magic number to identify*/ + .adapter = &port->frontends.adapter,/* for CI */ + .demux = &fe0->dvb.demux,/* for hw pid filter */ + .fpga_rw = netup_altera_fpga_rw, + }; + + altera_ci_init(&netup_ci_cfg, port->nr); + break; + } + case CX23885_BOARD_TEVII_S470: { + u8 eeprom[256]; /* 24C02 i2c eeprom */ + + if (port->nr != 1) + break; + + /* Read entire EEPROM */ + dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; + tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom)); + printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0); + memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6); + break; + } + } + + return ret; + +frontend_detach: + port->gate_ctrl = NULL; + videobuf_dvb_dealloc_frontends(&port->frontends); + return -EINVAL; +} + +int cx23885_dvb_register(struct cx23885_tsport *port) +{ + + struct videobuf_dvb_frontend *fe0; + struct cx23885_dev *dev = port->dev; + int err, i; + + /* Here we need to allocate the correct number of frontends, + * as reflected in the cards struct. The reality is that currently + * no cx23885 boards support this - yet. But, if we don't modify this + * code then the second frontend would never be allocated (later) + * and fail with error before the attach in dvb_register(). + * Without these changes we risk an OOPS later. The changes here + * are for safety, and should provide a good foundation for the + * future addition of any multi-frontend cx23885 based boards. + */ + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + port->num_frontends); + + for (i = 1; i <= port->num_frontends; i++) { + if (videobuf_dvb_alloc_frontend( + &port->frontends, i) == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + return -ENOMEM; + } + + fe0 = videobuf_dvb_get_frontend(&port->frontends, i); + if (!fe0) + err = -EINVAL; + + dprintk(1, "%s\n", __func__); + dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n", + dev->board, + dev->name, + dev->pci_bus, + dev->pci_slot); + + err = -ENODEV; + + /* dvb stuff */ + /* We have to init the queue for each frontend on a port. */ + printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name); + videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops, + &dev->pci->dev, &port->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, + sizeof(struct cx23885_buffer), port, NULL); + } + err = dvb_register(port); + if (err != 0) + printk(KERN_ERR "%s() dvb_register failed err = %d\n", + __func__, err); + + return err; +} + +int cx23885_dvb_unregister(struct cx23885_tsport *port) +{ + struct videobuf_dvb_frontend *fe0; + + /* FIXME: in an error condition where the we have + * an expected number of frontends (attach problem) + * then this might not clean up correctly, if 1 + * is invalid. + * This comment only applies to future boards IF they + * implement MFE support. + */ + fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); + if (fe0 && fe0->dvb.frontend) + videobuf_dvb_unregister_bus(&port->frontends); + + switch (port->dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + netup_ci_exit(port); + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_release(port->dev, port->nr); + break; + } + + port->gate_ctrl = NULL; + + return 0; +} + diff --git a/drivers/media/pci/cx23885/cx23885-f300.c b/drivers/media/pci/cx23885/cx23885-f300.c new file mode 100644 index 00000000..5444cc52 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-f300.c @@ -0,0 +1,178 @@ +/* + * Driver for Silicon Labs C8051F300 microcontroller. + * + * It is used for LNB power control in TeVii S470, + * TBS 6920 PCIe DVB-S2 cards. + * + * Microcontroller connected to cx23885 GPIO pins: + * GPIO0 - data - P0.3 F300 + * GPIO1 - reset - P0.2 F300 + * GPIO2 - clk - P0.1 F300 + * GPIO3 - busy - P0.0 F300 + * + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" +#include "cx23885-f300.h" + +#define F300_DATA GPIO_0 +#define F300_RESET GPIO_1 +#define F300_CLK GPIO_2 +#define F300_BUSY GPIO_3 + +static void f300_set_line(struct cx23885_dev *dev, u32 line, u8 lvl) +{ + cx23885_gpio_enable(dev, line, 1); + if (lvl == 1) + cx23885_gpio_set(dev, line); + else + cx23885_gpio_clear(dev, line); +} + +static u8 f300_get_line(struct cx23885_dev *dev, u32 line) +{ + cx23885_gpio_enable(dev, line, 0); + + return cx23885_gpio_get(dev, line); +} + +static void f300_send_byte(struct cx23885_dev *dev, u8 dta) +{ + u8 i; + + for (i = 0; i < 8; i++) { + f300_set_line(dev, F300_CLK, 0); + udelay(30); + f300_set_line(dev, F300_DATA, (dta & 0x80) >> 7);/* msb first */ + udelay(30); + dta <<= 1; + f300_set_line(dev, F300_CLK, 1); + udelay(30); + } +} + +static u8 f300_get_byte(struct cx23885_dev *dev) +{ + u8 i, dta = 0; + + for (i = 0; i < 8; i++) { + f300_set_line(dev, F300_CLK, 0); + udelay(30); + dta <<= 1; + f300_set_line(dev, F300_CLK, 1); + udelay(30); + dta |= f300_get_line(dev, F300_DATA);/* msb first */ + + } + + return dta; +} + +static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + u8 i, temp, ret = 0; + + temp = buf[0]; + for (i = 0; i < buf[0]; i++) + temp += buf[i + 1]; + temp = (~temp + 1);/* get check sum */ + buf[1 + buf[0]] = temp; + + f300_set_line(dev, F300_RESET, 1); + f300_set_line(dev, F300_CLK, 1); + udelay(30); + f300_set_line(dev, F300_DATA, 1); + msleep(1); + + /* question: */ + f300_set_line(dev, F300_RESET, 0);/* begin to send data */ + msleep(1); + + f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */ + msleep(1); + + temp = buf[0]; + temp += 2; + for (i = 0; i < temp; i++) + f300_send_byte(dev, buf[i]); + + f300_set_line(dev, F300_RESET, 1);/* sent data over */ + f300_set_line(dev, F300_DATA, 1); + + /* answer: */ + temp = 0; + for (i = 0; ((i < 8) & (temp == 0)); i++) { + msleep(1); + if (f300_get_line(dev, F300_BUSY) == 0) + temp = 1; + } + + if (i > 7) { + printk(KERN_ERR "%s: timeout, the slave no response\n", + __func__); + ret = 1; /* timeout, the slave no response */ + } else { /* the slave not busy, prepare for getting data */ + f300_set_line(dev, F300_RESET, 0);/*ready...*/ + msleep(1); + f300_send_byte(dev, 0xe1);/* 0xe1 is Read */ + msleep(1); + temp = f300_get_byte(dev);/*get the data length */ + if (temp > 14) + temp = 14; + + for (i = 0; i < (temp + 1); i++) + f300_get_byte(dev);/* get data to empty buffer */ + + f300_set_line(dev, F300_RESET, 1);/* received data over */ + f300_set_line(dev, F300_DATA, 1); + } + + return ret; +} + +int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + u8 buf[16]; + + buf[0] = 0x05; + buf[1] = 0x38;/* write port */ + buf[2] = 0x01;/* A port, lnb power */ + + switch (voltage) { + case SEC_VOLTAGE_13: + buf[3] = 0x01;/* power on */ + buf[4] = 0x02;/* B port, H/V */ + buf[5] = 0x00;/*13V v*/ + break; + case SEC_VOLTAGE_18: + buf[3] = 0x01; + buf[4] = 0x02; + buf[5] = 0x01;/* 18V h*/ + break; + case SEC_VOLTAGE_OFF: + buf[3] = 0x00;/* power off */ + buf[4] = 0x00; + buf[5] = 0x00; + break; + } + + return f300_xfer(fe, buf); +} diff --git a/drivers/media/pci/cx23885/cx23885-f300.h b/drivers/media/pci/cx23885/cx23885-f300.h new file mode 100644 index 00000000..e73344c9 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-f300.h @@ -0,0 +1,2 @@ +extern int f300_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage); diff --git a/drivers/media/pci/cx23885/cx23885-i2c.c b/drivers/media/pci/cx23885/cx23885-i2c.c new file mode 100644 index 00000000..48873143 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-i2c.c @@ -0,0 +1,396 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "cx23885.h" + +#include + +static unsigned int i2c_debug; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +static unsigned int i2c_scan; +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); + +#define dprintk(level, fmt, arg...)\ + do { if (i2c_debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) + +#define I2C_WAIT_DELAY 32 +#define I2C_WAIT_RETRY 64 + +#define I2C_EXTEND (1 << 3) +#define I2C_NOSTOP (1 << 4) + +static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + return cx_read(bus->reg_stat) & 0x01; +} + +static inline int i2c_is_busy(struct i2c_adapter *i2c_adap) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + return cx_read(bus->reg_stat) & 0x02 ? 1 : 0; +} + +static int i2c_wait_done(struct i2c_adapter *i2c_adap) +{ + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + if (!i2c_is_busy(i2c_adap)) + break; + udelay(I2C_WAIT_DELAY); + } + + if (I2C_WAIT_RETRY == count) + return 0; + + return 1; +} + +static int i2c_sendbytes(struct i2c_adapter *i2c_adap, + const struct i2c_msg *msg, int joined_rlen) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + u32 wdata, addr, ctrl; + int retval, cnt; + + if (joined_rlen) + dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __func__, + msg->len, joined_rlen); + else + dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); + + /* Deal with i2c probe functions with zero payload */ + if (msg->len == 0) { + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2)); + if (!i2c_wait_done(i2c_adap)) + return -EIO; + if (!i2c_slave_did_ack(i2c_adap)) + return -ENXIO; + + dprintk(1, "%s() returns 0\n", __func__); + return 0; + } + + + /* dev, reg + first byte */ + addr = (msg->addr << 25) | msg->buf[0]; + wdata = msg->buf[0]; + ctrl = bus->i2c_period | (1 << 12) | (1 << 2); + + if (msg->len > 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + else if (joined_rlen) + ctrl |= I2C_NOSTOP; + + cx_write(bus->reg_addr, addr); + cx_write(bus->reg_wdata, wdata); + cx_write(bus->reg_ctrl, ctrl); + + if (!i2c_wait_done(i2c_adap)) + goto eio; + if (i2c_debug) { + printk(" addr << 1, msg->buf[0]); + if (!(ctrl & I2C_NOSTOP)) + printk(" >\n"); + } + + for (cnt = 1; cnt < msg->len; cnt++) { + /* following bytes */ + wdata = msg->buf[cnt]; + ctrl = bus->i2c_period | (1 << 12) | (1 << 2); + + if (cnt < msg->len - 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + else if (joined_rlen) + ctrl |= I2C_NOSTOP; + + cx_write(bus->reg_addr, addr); + cx_write(bus->reg_wdata, wdata); + cx_write(bus->reg_ctrl, ctrl); + + if (!i2c_wait_done(i2c_adap)) + goto eio; + if (i2c_debug) { + dprintk(1, " %02x", msg->buf[cnt]); + if (!(ctrl & I2C_NOSTOP)) + dprintk(1, " >\n"); + } + } + return msg->len; + + eio: + retval = -EIO; + if (i2c_debug) + printk(KERN_ERR " ERR: %d\n", retval); + return retval; +} + +static int i2c_readbytes(struct i2c_adapter *i2c_adap, + const struct i2c_msg *msg, int joined) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + u32 ctrl, cnt; + int retval; + + + if (i2c_debug && !joined) + dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); + + /* Deal with i2c probe functions with zero payload */ + if (msg->len == 0) { + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1); + if (!i2c_wait_done(i2c_adap)) + return -EIO; + if (!i2c_slave_did_ack(i2c_adap)) + return -ENXIO; + + + dprintk(1, "%s() returns 0\n", __func__); + return 0; + } + + if (i2c_debug) { + if (joined) + dprintk(1, " R"); + else + dprintk(1, " addr << 1) + 1); + } + + for (cnt = 0; cnt < msg->len; cnt++) { + + ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1; + + if (cnt < msg->len - 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, ctrl); + + if (!i2c_wait_done(i2c_adap)) + goto eio; + msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff; + if (i2c_debug) { + dprintk(1, " %02x", msg->buf[cnt]); + if (!(ctrl & I2C_NOSTOP)) + dprintk(1, " >\n"); + } + } + return msg->len; + + eio: + retval = -EIO; + if (i2c_debug) + printk(KERN_ERR " ERR: %d\n", retval); + return retval; +} + +static int i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg *msgs, int num) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + int i, retval = 0; + + dprintk(1, "%s(num = %d)\n", __func__, num); + + for (i = 0 ; i < num; i++) { + dprintk(1, "%s(num = %d) addr = 0x%02x len = 0x%x\n", + __func__, num, msgs[i].addr, msgs[i].len); + if (msgs[i].flags & I2C_M_RD) { + /* read */ + retval = i2c_readbytes(i2c_adap, &msgs[i], 0); + } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* write then read from same address */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], + msgs[i + 1].len); + if (retval < 0) + goto err; + i++; + retval = i2c_readbytes(i2c_adap, &msgs[i], 1); + } else { + /* write */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], 0); + } + if (retval < 0) + goto err; + } + return num; + + err: + return retval; +} + +static u32 cx23885_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; +} + +static struct i2c_algorithm cx23885_i2c_algo_template = { + .master_xfer = i2c_xfer, + .functionality = cx23885_functionality, +}; + +/* ----------------------------------------------------------------------- */ + +static struct i2c_adapter cx23885_i2c_adap_template = { + .name = "cx23885", + .owner = THIS_MODULE, + .algo = &cx23885_i2c_algo_template, +}; + +static struct i2c_client cx23885_i2c_client_template = { + .name = "cx23885 internal", +}; + +static char *i2c_devs[128] = { + [0x10 >> 1] = "tda10048", + [0x12 >> 1] = "dib7000pc", + [0x1c >> 1] = "lgdt3303", + [0x86 >> 1] = "tda9887", + [0x32 >> 1] = "cx24227", + [0x88 >> 1] = "cx25837", + [0x84 >> 1] = "tda8295", + [0x98 >> 1] = "flatiron", + [0xa0 >> 1] = "eeprom", + [0xc0 >> 1] = "tuner/mt2131/tda8275", + [0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028", + [0xc8 >> 1] = "tuner/xc3028L", +}; + +static void do_i2c_scan(char *name, struct i2c_client *c) +{ + unsigned char buf; + int i, rc; + + for (i = 0; i < 128; i++) { + c->addr = i; + rc = i2c_master_recv(c, &buf, 0); + if (rc < 0) + continue; + printk(KERN_INFO "%s: i2c scan: found device @ 0x%x [%s]\n", + name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); + } +} + +/* init + register i2c adapter */ +int cx23885_i2c_register(struct cx23885_i2c *bus) +{ + struct cx23885_dev *dev = bus->dev; + + dprintk(1, "%s(bus = %d)\n", __func__, bus->nr); + + bus->i2c_adap = cx23885_i2c_adap_template; + bus->i2c_client = cx23885_i2c_client_template; + bus->i2c_adap.dev.parent = &dev->pci->dev; + + strlcpy(bus->i2c_adap.name, bus->dev->name, + sizeof(bus->i2c_adap.name)); + + bus->i2c_adap.algo_data = bus; + i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev); + i2c_add_adapter(&bus->i2c_adap); + + bus->i2c_client.adapter = &bus->i2c_adap; + + if (0 == bus->i2c_rc) { + dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr); + if (i2c_scan) { + printk(KERN_INFO "%s: scan bus %d:\n", + dev->name, bus->nr); + do_i2c_scan(dev->name, &bus->i2c_client); + } + } else + printk(KERN_WARNING "%s: i2c bus %d register FAILED\n", + dev->name, bus->nr); + + /* Instantiate the IR receiver device, if present */ + if (0 == bus->i2c_rc) { + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x6b, I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + /* Use quick read command for probe, some IR chips don't + * support writes */ + i2c_new_probed_device(&bus->i2c_adap, &info, addr_list, + i2c_probe_func_quick_read); + } + + return bus->i2c_rc; +} + +int cx23885_i2c_unregister(struct cx23885_i2c *bus) +{ + i2c_del_adapter(&bus->i2c_adap); + return 0; +} + +void cx23885_av_clk(struct cx23885_dev *dev, int enable) +{ + /* write 0 to bus 2 addr 0x144 via i2x_xfer() */ + char buffer[3]; + struct i2c_msg msg; + dprintk(1, "%s(enabled = %d)\n", __func__, enable); + + /* Register 0x144 */ + buffer[0] = 0x01; + buffer[1] = 0x44; + if (enable == 1) + buffer[2] = 0x05; + else + buffer[2] = 0x00; + + msg.addr = 0x44; + msg.flags = I2C_M_TEN; + msg.len = 3; + msg.buf = buffer; + + i2c_xfer(&dev->i2c_bus[2].i2c_adap, &msg, 1); +} + +/* ----------------------------------------------------------------------- */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c new file mode 100644 index 00000000..7875dfbe --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-input.c @@ -0,0 +1,375 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Infrared remote control input device + * + * Most of this file is + * + * Copyright (C) 2009 Andy Walls + * + * However, the cx23885_input_{init,fini} functions contained herein are + * derived from Linux kernel files linux/media/video/.../...-input.c marked as: + * + * Copyright (C) 2008 + * Copyright (C) 2005 Ludovico Cavedon + * Markus Rechberger + * Mauro Carvalho Chehab + * Sascha Sommer + * Copyright (C) 2004, 2005 Chris Pascoe + * Copyright (C) 2003, 2004 Gerd Knorr + * Copyright (C) 2003 Pavel Machek + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include +#include + +#include "cx23885.h" +#include "cx23885-input.h" + +#define MODULE_NAME "cx23885" + +static void cx23885_input_process_measurements(struct cx23885_dev *dev, + bool overrun) +{ + struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir; + + ssize_t num; + int count, i; + bool handle = false; + struct ir_raw_event ir_core_event[64]; + + do { + num = 0; + v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ir_core_event, + sizeof(ir_core_event), &num); + + count = num / sizeof(struct ir_raw_event); + + for (i = 0; i < count; i++) { + ir_raw_event_store(kernel_ir->rc, + &ir_core_event[i]); + handle = true; + } + } while (num != 0); + + if (overrun) + ir_raw_event_reset(kernel_ir->rc); + else if (handle) + ir_raw_event_handle(kernel_ir->rc); +} + +void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) +{ + struct v4l2_subdev_ir_parameters params; + int overrun, data_available; + + if (dev->sd_ir == NULL || events == 0) + return; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_MYGICA_X8507: + /* + * The only boards we handle right now. However other boards + * using the CX2388x integrated IR controller should be similar + */ + break; + default: + return; + } + + overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN | + V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN); + + data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED | + V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ); + + if (overrun) { + /* If there was a FIFO overrun, stop the device */ + v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); + params.enable = false; + /* Mitigate race with cx23885_input_ir_stop() */ + params.shutdown = atomic_read(&dev->ir_input_stopping); + v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + } + + if (data_available) + cx23885_input_process_measurements(dev, overrun); + + if (overrun) { + /* If there was a FIFO overrun, clear & restart the device */ + params.enable = true; + /* Mitigate race with cx23885_input_ir_stop() */ + params.shutdown = atomic_read(&dev->ir_input_stopping); + v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + } +} + +static int cx23885_input_ir_start(struct cx23885_dev *dev) +{ + struct v4l2_subdev_ir_parameters params; + + if (dev->sd_ir == NULL) + return -ENODEV; + + atomic_set(&dev->ir_input_stopping, 0); + + v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_MYGICA_X8507: + /* + * The IR controller on this board only returns pulse widths. + * Any other mode setting will fail to set up the device. + */ + params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + params.enable = true; + params.interrupt_enable = true; + params.shutdown = false; + + /* Setup for baseband compatible with both RC-5 and RC-6A */ + params.modulation = false; + /* RC-5: 2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/ + /* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/ + params.max_pulse_width = 3333333; /* ns */ + /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */ + /* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */ + params.noise_filter_min_width = 333333; /* ns */ + /* + * This board has inverted receive sense: + * mark is received as low logic level; + * falling edges are detected as rising edges; etc. + */ + params.invert_level = true; + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + /* + * The IR controller on this board only returns pulse widths. + * Any other mode setting will fail to set up the device. + */ + params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + params.enable = true; + params.interrupt_enable = true; + params.shutdown = false; + + /* Setup for a standard NEC protocol */ + params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */ + params.carrier_range_lower = 33000; /* Hz */ + params.carrier_range_upper = 43000; /* Hz */ + params.duty_cycle = 33; /* percent, 33 percent for NEC */ + + /* + * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units + * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns + */ + params.max_pulse_width = 12378022; /* ns */ + + /* + * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit + * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns + */ + params.noise_filter_min_width = 351648; /* ns */ + + params.modulation = false; + params.invert_level = true; + break; + } + v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + return 0; +} + +static int cx23885_input_ir_open(struct rc_dev *rc) +{ + struct cx23885_kernel_ir *kernel_ir = rc->priv; + + if (kernel_ir->cx == NULL) + return -ENODEV; + + return cx23885_input_ir_start(kernel_ir->cx); +} + +static void cx23885_input_ir_stop(struct cx23885_dev *dev) +{ + struct v4l2_subdev_ir_parameters params; + + if (dev->sd_ir == NULL) + return; + + /* + * Stop the sd_ir subdevice from generating notifications and + * scheduling work. + * It is shutdown this way in order to mitigate a race with + * cx23885_input_rx_work_handler() in the overrun case, which could + * re-enable the subdevice. + */ + atomic_set(&dev->ir_input_stopping, 1); + v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); + while (params.shutdown == false) { + params.enable = false; + params.interrupt_enable = false; + params.shutdown = true; + v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); + } + flush_work(&dev->cx25840_work); + flush_work(&dev->ir_rx_work); + flush_work(&dev->ir_tx_work); +} + +static void cx23885_input_ir_close(struct rc_dev *rc) +{ + struct cx23885_kernel_ir *kernel_ir = rc->priv; + + if (kernel_ir->cx != NULL) + cx23885_input_ir_stop(kernel_ir->cx); +} + +int cx23885_input_init(struct cx23885_dev *dev) +{ + struct cx23885_kernel_ir *kernel_ir; + struct rc_dev *rc; + char *rc_map; + enum rc_driver_type driver_type; + unsigned long allowed_protos; + + int ret; + + /* + * If the IR device (hardware registers, chip, GPIO lines, etc.) isn't + * encapsulated in a v4l2_subdev, then I'm not going to deal with it. + */ + if (dev->sd_ir == NULL) + return -ENODEV; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + /* Integrated CX2388[58] IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_BIT_ALL; + /* The grey Hauppauge RC-5 remote */ + rc_map = RC_MAP_HAUPPAUGE; + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + /* Integrated CX23885 IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_BIT_NEC; + /* The grey Terratec remote with orange buttons */ + rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS; + break; + case CX23885_BOARD_TEVII_S470: + /* Integrated CX23885 IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_BIT_ALL; + /* A guess at the remote */ + rc_map = RC_MAP_TEVII_NEC; + break; + case CX23885_BOARD_MYGICA_X8507: + /* Integrated CX23885 IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_BIT_ALL; + /* A guess at the remote */ + rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02; + break; + default: + return -ENODEV; + } + + /* cx23885 board instance kernel IR state */ + kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL); + if (kernel_ir == NULL) + return -ENOMEM; + + kernel_ir->cx = dev; + kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)", + cx23885_boards[dev->board].name); + kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0", + pci_name(dev->pci)); + + /* input device */ + rc = rc_allocate_device(); + if (!rc) { + ret = -ENOMEM; + goto err_out_free; + } + + kernel_ir->rc = rc; + rc->input_name = kernel_ir->name; + rc->input_phys = kernel_ir->phys; + rc->input_id.bustype = BUS_PCI; + rc->input_id.version = 1; + if (dev->pci->subsystem_vendor) { + rc->input_id.vendor = dev->pci->subsystem_vendor; + rc->input_id.product = dev->pci->subsystem_device; + } else { + rc->input_id.vendor = dev->pci->vendor; + rc->input_id.product = dev->pci->device; + } + rc->dev.parent = &dev->pci->dev; + rc->driver_type = driver_type; + rc->allowed_protos = allowed_protos; + rc->priv = kernel_ir; + rc->open = cx23885_input_ir_open; + rc->close = cx23885_input_ir_close; + rc->map_name = rc_map; + rc->driver_name = MODULE_NAME; + + /* Go */ + dev->kernel_ir = kernel_ir; + ret = rc_register_device(rc); + if (ret) + goto err_out_stop; + + return 0; + +err_out_stop: + cx23885_input_ir_stop(dev); + dev->kernel_ir = NULL; + rc_free_device(rc); +err_out_free: + kfree(kernel_ir->phys); + kfree(kernel_ir->name); + kfree(kernel_ir); + return ret; +} + +void cx23885_input_fini(struct cx23885_dev *dev) +{ + /* Always stop the IR hardware from generating interrupts */ + cx23885_input_ir_stop(dev); + + if (dev->kernel_ir == NULL) + return; + rc_unregister_device(dev->kernel_ir->rc); + kfree(dev->kernel_ir->phys); + kfree(dev->kernel_ir->name); + kfree(dev->kernel_ir); + dev->kernel_ir = NULL; +} diff --git a/drivers/media/pci/cx23885/cx23885-input.h b/drivers/media/pci/cx23885/cx23885-input.h new file mode 100644 index 00000000..87dc44e6 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-input.h @@ -0,0 +1,30 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Infrared remote control input device + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX23885_INPUT_H_ +#define _CX23885_INPUT_H_ +void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events); + +int cx23885_input_init(struct cx23885_dev *dev); +void cx23885_input_fini(struct cx23885_dev *dev); +#endif diff --git a/drivers/media/pci/cx23885/cx23885-ioctl.c b/drivers/media/pci/cx23885/cx23885-ioctl.c new file mode 100644 index 00000000..acdb6d58 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-ioctl.c @@ -0,0 +1,207 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Various common ioctl() support functions + * + * Copyright (c) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" +#include "cx23885-ioctl.h" + +#include + +int cx23885_g_chip_ident(struct file *file, void *fh, + struct v4l2_dbg_chip_ident *chip) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + int err = 0; + u8 rev; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + switch (chip->match.type) { + case V4L2_CHIP_MATCH_HOST: + switch (chip->match.addr) { + case 0: + rev = cx_read(RDR_CFG2) & 0xff; + switch (dev->pci->device) { + case 0x8852: + /* rev 0x04 could be '885 or '888. Pick '888. */ + if (rev == 0x04) + chip->ident = V4L2_IDENT_CX23888; + else + chip->ident = V4L2_IDENT_CX23885; + break; + case 0x8880: + if (rev == 0x0e || rev == 0x0f) + chip->ident = V4L2_IDENT_CX23887; + else + chip->ident = V4L2_IDENT_CX23888; + break; + default: + chip->ident = V4L2_IDENT_UNKNOWN; + break; + } + chip->revision = (dev->pci->device << 16) | (rev << 8) | + (dev->hwrevision & 0xff); + break; + case 1: + if (dev->v4l_device != NULL) { + chip->ident = V4L2_IDENT_CX23417; + chip->revision = 0; + } + break; + case 2: + /* + * The integrated IR controller on the CX23888 is + * host chip 2. It may not be used/initialized or sd_ir + * may be pointing at the cx25840 subdevice for the + * IR controller on the CX23885. Thus we find it + * without using the dev->sd_ir pointer. + */ + call_hw(dev, CX23885_HW_888_IR, core, g_chip_ident, + chip); + break; + default: + err = -EINVAL; /* per V4L2 spec */ + break; + } + break; + case V4L2_CHIP_MATCH_I2C_DRIVER: + /* If needed, returns V4L2_IDENT_AMBIGUOUS without extra work */ + call_all(dev, core, g_chip_ident, chip); + break; + case V4L2_CHIP_MATCH_I2C_ADDR: + /* + * We could return V4L2_IDENT_UNKNOWN, but we don't do the work + * to look if a chip is at the address with no driver. That's a + * dangerous thing to do with EEPROMs anyway. + */ + call_all(dev, core, g_chip_ident, chip); + break; + default: + err = -EINVAL; + break; + } + return err; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cx23885_g_host_register(struct cx23885_dev *dev, + struct v4l2_dbg_register *reg) +{ + if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0)) + return -EINVAL; + + reg->size = 4; + reg->val = cx_read(reg->reg); + return 0; +} + +static int cx23417_g_register(struct cx23885_dev *dev, + struct v4l2_dbg_register *reg) +{ + u32 value; + + if (dev->v4l_device == NULL) + return -EINVAL; + + if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000) + return -EINVAL; + + if (mc417_register_read(dev, (u16) reg->reg, &value)) + return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */ + + reg->size = 4; + reg->val = value; + return 0; +} + +int cx23885_g_register(struct file *file, void *fh, + struct v4l2_dbg_register *reg) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (reg->match.type == V4L2_CHIP_MATCH_HOST) { + switch (reg->match.addr) { + case 0: + return cx23885_g_host_register(dev, reg); + case 1: + return cx23417_g_register(dev, reg); + default: + break; + } + } + + /* FIXME - any error returns should not be ignored */ + call_all(dev, core, g_register, reg); + return 0; +} + +static int cx23885_s_host_register(struct cx23885_dev *dev, + const struct v4l2_dbg_register *reg) +{ + if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0)) + return -EINVAL; + + cx_write(reg->reg, reg->val); + return 0; +} + +static int cx23417_s_register(struct cx23885_dev *dev, + const struct v4l2_dbg_register *reg) +{ + if (dev->v4l_device == NULL) + return -EINVAL; + + if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000) + return -EINVAL; + + if (mc417_register_write(dev, (u16) reg->reg, (u32) reg->val)) + return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */ + return 0; +} + +int cx23885_s_register(struct file *file, void *fh, + const struct v4l2_dbg_register *reg) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (reg->match.type == V4L2_CHIP_MATCH_HOST) { + switch (reg->match.addr) { + case 0: + return cx23885_s_host_register(dev, reg); + case 1: + return cx23417_s_register(dev, reg); + default: + break; + } + } + + /* FIXME - any error returns should not be ignored */ + call_all(dev, core, s_register, reg); + return 0; +} +#endif diff --git a/drivers/media/pci/cx23885/cx23885-ioctl.h b/drivers/media/pci/cx23885/cx23885-ioctl.h new file mode 100644 index 00000000..a6080964 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-ioctl.h @@ -0,0 +1,39 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Various common ioctl() support functions + * + * Copyright (c) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _CX23885_IOCTL_H_ +#define _CX23885_IOCTL_H_ + +int cx23885_g_chip_ident(struct file *file, void *fh, + struct v4l2_dbg_chip_ident *chip); + +#ifdef CONFIG_VIDEO_ADV_DEBUG +int cx23885_g_register(struct file *file, void *fh, + struct v4l2_dbg_register *reg); + + +int cx23885_s_register(struct file *file, void *fh, + const struct v4l2_dbg_register *reg); + +#endif +#endif diff --git a/drivers/media/pci/cx23885/cx23885-ir.c b/drivers/media/pci/cx23885/cx23885-ir.c new file mode 100644 index 00000000..bfef1935 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-ir.c @@ -0,0 +1,118 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Infrared device support routines - non-input, non-vl42_subdev routines + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include + +#include "cx23885.h" +#include "cx23885-ir.h" +#include "cx23885-input.h" + +#define CX23885_IR_RX_FIFO_SERVICE_REQ 0 +#define CX23885_IR_RX_END_OF_RX_DETECTED 1 +#define CX23885_IR_RX_HW_FIFO_OVERRUN 2 +#define CX23885_IR_RX_SW_FIFO_OVERRUN 3 + +#define CX23885_IR_TX_FIFO_SERVICE_REQ 0 + + +void cx23885_ir_rx_work_handler(struct work_struct *work) +{ + struct cx23885_dev *dev = + container_of(work, struct cx23885_dev, ir_rx_work); + u32 events = 0; + unsigned long *notifications = &dev->ir_rx_notifications; + + if (test_and_clear_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications)) + events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN; + if (test_and_clear_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications)) + events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN; + if (test_and_clear_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications)) + events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED; + if (test_and_clear_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications)) + events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ; + + if (events == 0) + return; + + if (dev->kernel_ir) + cx23885_input_rx_work_handler(dev, events); +} + +void cx23885_ir_tx_work_handler(struct work_struct *work) +{ + struct cx23885_dev *dev = + container_of(work, struct cx23885_dev, ir_tx_work); + u32 events = 0; + unsigned long *notifications = &dev->ir_tx_notifications; + + if (test_and_clear_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications)) + events |= V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ; + + if (events == 0) + return; + +} + +/* Possibly called in an IRQ context */ +void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events) +{ + struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev); + unsigned long *notifications = &dev->ir_rx_notifications; + + if (events & V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ) + set_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications); + if (events & V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED) + set_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications); + if (events & V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN) + set_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications); + if (events & V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN) + set_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications); + + /* + * For the integrated AV core, we are already in a workqueue context. + * For the CX23888 integrated IR, we are in an interrupt context. + */ + if (sd == dev->sd_cx25840) + cx23885_ir_rx_work_handler(&dev->ir_rx_work); + else + schedule_work(&dev->ir_rx_work); +} + +/* Possibly called in an IRQ context */ +void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events) +{ + struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev); + unsigned long *notifications = &dev->ir_tx_notifications; + + if (events & V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ) + set_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications); + + /* + * For the integrated AV core, we are already in a workqueue context. + * For the CX23888 integrated IR, we are in an interrupt context. + */ + if (sd == dev->sd_cx25840) + cx23885_ir_tx_work_handler(&dev->ir_tx_work); + else + schedule_work(&dev->ir_tx_work); +} diff --git a/drivers/media/pci/cx23885/cx23885-ir.h b/drivers/media/pci/cx23885/cx23885-ir.h new file mode 100644 index 00000000..0c9d8bda --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-ir.h @@ -0,0 +1,31 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Infrared device support routines - non-input, non-vl42_subdev routines + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX23885_IR_H_ +#define _CX23885_IR_H_ +void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events); +void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events); + +void cx23885_ir_rx_work_handler(struct work_struct *work); +void cx23885_ir_tx_work_handler(struct work_struct *work); +#endif diff --git a/drivers/media/pci/cx23885/cx23885-reg.h b/drivers/media/pci/cx23885/cx23885-reg.h new file mode 100644 index 00000000..a99936e0 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-reg.h @@ -0,0 +1,452 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _CX23885_REG_H_ +#define _CX23885_REG_H_ + +/* +Address Map +0x00000000 -> 0x00009000 TX SRAM (Fifos) +0x00010000 -> 0x00013c00 RX SRAM CMDS + CDT + +EACH CMDS struct is 0x80 bytes long + +DMAx_PTR1 = 0x03040 address of first cluster +DMAx_PTR2 = 0x10600 address of the CDT +DMAx_CNT1 = cluster size in (bytes >> 4) -1 +DMAx_CNT2 = total cdt size for all entries >> 3 + +Cluster Descriptor entry = 4 DWORDS + DWORD 0 -> ptr to cluster + DWORD 1 Reserved + DWORD 2 Reserved + DWORD 3 Reserved + +Channel manager Data Structure entry = 20 DWORD + 0 IntialProgramCounterLow + 1 IntialProgramCounterHigh + 2 ClusterDescriptorTableBase + 3 ClusterDescriptorTableSize + 4 InstructionQueueBase + 5 InstructionQueueSize +... Reserved + 19 Reserved +*/ + +/* Risc Instructions */ +#define RISC_CNT_INC 0x00010000 +#define RISC_CNT_RESET 0x00030000 +#define RISC_IRQ1 0x01000000 +#define RISC_IRQ2 0x02000000 +#define RISC_EOL 0x04000000 +#define RISC_SOL 0x08000000 +#define RISC_WRITE 0x10000000 +#define RISC_SKIP 0x20000000 +#define RISC_JUMP 0x70000000 +#define RISC_SYNC 0x80000000 +#define RISC_RESYNC 0x80008000 +#define RISC_READ 0x90000000 +#define RISC_WRITERM 0xB0000000 +#define RISC_WRITECM 0xC0000000 +#define RISC_WRITECR 0xD0000000 +#define RISC_WRITEC 0x50000000 +#define RISC_READC 0xA0000000 + + +/* Audio and Video Core */ +#define HOST_REG1 0x00000000 +#define HOST_REG2 0x00000001 +#define HOST_REG3 0x00000002 + +/* Chip Configuration Registers */ +#define CHIP_CTRL 0x00000100 +#define AFE_CTRL 0x00000104 +#define VID_PLL_INT_POST 0x00000108 +#define VID_PLL_FRAC 0x0000010C +#define AUX_PLL_INT_POST 0x00000110 +#define AUX_PLL_FRAC 0x00000114 +#define SYS_PLL_INT_POST 0x00000118 +#define SYS_PLL_FRAC 0x0000011C +#define PIN_CTRL 0x00000120 +#define AUD_IO_CTRL 0x00000124 +#define AUD_LOCK1 0x00000128 +#define AUD_LOCK2 0x0000012C +#define POWER_CTRL 0x00000130 +#define AFE_DIAG_CTRL1 0x00000134 +#define AFE_DIAG_CTRL3 0x0000013C +#define PLL_DIAG_CTRL 0x00000140 +#define AFE_CLK_OUT_CTRL 0x00000144 +#define DLL1_DIAG_CTRL 0x0000015C + +/* GPIO[23:19] Output Enable */ +#define GPIO2_OUT_EN_REG 0x00000160 +/* GPIO[23:19] Data Registers */ +#define GPIO2 0x00000164 + +#define IFADC_CTRL 0x00000180 + +/* Infrared Remote Registers */ +#define IR_CNTRL_REG 0x00000200 +#define IR_TXCLK_REG 0x00000204 +#define IR_RXCLK_REG 0x00000208 +#define IR_CDUTY_REG 0x0000020C +#define IR_STAT_REG 0x00000210 +#define IR_IRQEN_REG 0x00000214 +#define IR_FILTR_REG 0x00000218 +#define IR_FIFO_REG 0x0000023C + +/* Video Decoder Registers */ +#define MODE_CTRL 0x00000400 +#define OUT_CTRL1 0x00000404 +#define OUT_CTRL2 0x00000408 +#define GEN_STAT 0x0000040C +#define INT_STAT_MASK 0x00000410 +#define LUMA_CTRL 0x00000414 +#define HSCALE_CTRL 0x00000418 +#define VSCALE_CTRL 0x0000041C +#define CHROMA_CTRL 0x00000420 +#define VBI_LINE_CTRL1 0x00000424 +#define VBI_LINE_CTRL2 0x00000428 +#define VBI_LINE_CTRL3 0x0000042C +#define VBI_LINE_CTRL4 0x00000430 +#define VBI_LINE_CTRL5 0x00000434 +#define VBI_FC_CFG 0x00000438 +#define VBI_MISC_CFG1 0x0000043C +#define VBI_MISC_CFG2 0x00000440 +#define VBI_PAY1 0x00000444 +#define VBI_PAY2 0x00000448 +#define VBI_CUST1_CFG1 0x0000044C +#define VBI_CUST1_CFG2 0x00000450 +#define VBI_CUST1_CFG3 0x00000454 +#define VBI_CUST2_CFG1 0x00000458 +#define VBI_CUST2_CFG2 0x0000045C +#define VBI_CUST2_CFG3 0x00000460 +#define VBI_CUST3_CFG1 0x00000464 +#define VBI_CUST3_CFG2 0x00000468 +#define VBI_CUST3_CFG3 0x0000046C +#define HORIZ_TIM_CTRL 0x00000470 +#define VERT_TIM_CTRL 0x00000474 +#define SRC_COMB_CFG 0x00000478 +#define CHROMA_VBIOFF_CFG 0x0000047C +#define FIELD_COUNT 0x00000480 +#define MISC_TIM_CTRL 0x00000484 +#define DFE_CTRL1 0x00000488 +#define DFE_CTRL2 0x0000048C +#define DFE_CTRL3 0x00000490 +#define PLL_CTRL 0x00000494 +#define HTL_CTRL 0x00000498 +#define COMB_CTRL 0x0000049C +#define CRUSH_CTRL 0x000004A0 +#define SOFT_RST_CTRL 0x000004A4 +#define CX885_VERSION 0x000004B4 +#define VBI_PASS_CTRL 0x000004BC + +/* Audio Decoder Registers */ +/* 8051 Configuration */ +#define DL_CTL 0x00000800 +#define STD_DET_STATUS 0x00000804 +#define STD_DET_CTL 0x00000808 +#define DW8051_INT 0x0000080C +#define GENERAL_CTL 0x00000810 +#define AAGC_CTL 0x00000814 +#define DEMATRIX_CTL 0x000008CC +#define PATH1_CTL1 0x000008D0 +#define PATH1_VOL_CTL 0x000008D4 +#define PATH1_EQ_CTL 0x000008D8 +#define PATH1_SC_CTL 0x000008DC +#define PATH2_CTL1 0x000008E0 +#define PATH2_VOL_CTL 0x000008E4 +#define PATH2_EQ_CTL 0x000008E8 +#define PATH2_SC_CTL 0x000008EC + +/* Sample Rate Converter */ +#define SRC_CTL 0x000008F0 +#define SRC_LF_COEF 0x000008F4 +#define SRC1_CTL 0x000008F8 +#define SRC2_CTL 0x000008FC +#define SRC3_CTL 0x00000900 +#define SRC4_CTL 0x00000904 +#define SRC5_CTL 0x00000908 +#define SRC6_CTL 0x0000090C +#define BAND_OUT_SEL 0x00000910 +#define I2S_N_CTL 0x00000914 +#define I2S_OUT_CTL 0x00000918 +#define AUTOCONFIG_REG 0x000009C4 + +/* Audio ADC Registers */ +#define DSM_CTRL1 0x00000000 +#define DSM_CTRL2 0x00000001 +#define CHP_EN_CTRL 0x00000002 +#define CHP_CLK_CTRL1 0x00000004 +#define CHP_CLK_CTRL2 0x00000005 +#define BG_REF_CTRL 0x00000006 +#define SD2_SW_CTRL1 0x00000008 +#define SD2_SW_CTRL2 0x00000009 +#define SD2_BIAS_CTRL 0x0000000A +#define AMP_BIAS_CTRL 0x0000000C +#define CH_PWR_CTRL1 0x0000000E +#define FLD_CH_SEL (1 << 3) +#define CH_PWR_CTRL2 0x0000000F +#define DSM_STATUS1 0x00000010 +#define DSM_STATUS2 0x00000011 +#define DIG_CTL1 0x00000012 +#define DIG_CTL2 0x00000013 +#define I2S_TX_CFG 0x0000001A + +#define DEV_CNTRL2 0x00040000 + +#define PCI_MSK_IR (1 << 28) +#define PCI_MSK_AV_CORE (1 << 27) +#define PCI_MSK_GPIO1 (1 << 24) +#define PCI_MSK_GPIO0 (1 << 23) +#define PCI_MSK_APB_DMA (1 << 12) +#define PCI_MSK_AL_WR (1 << 11) +#define PCI_MSK_AL_RD (1 << 10) +#define PCI_MSK_RISC_WR (1 << 9) +#define PCI_MSK_RISC_RD (1 << 8) +#define PCI_MSK_AUD_EXT (1 << 4) +#define PCI_MSK_AUD_INT (1 << 3) +#define PCI_MSK_VID_C (1 << 2) +#define PCI_MSK_VID_B (1 << 1) +#define PCI_MSK_VID_A 1 +#define PCI_INT_MSK 0x00040010 + +#define PCI_INT_STAT 0x00040014 +#define PCI_INT_MSTAT 0x00040018 + +#define VID_A_INT_MSK 0x00040020 +#define VID_A_INT_STAT 0x00040024 +#define VID_A_INT_MSTAT 0x00040028 +#define VID_A_INT_SSTAT 0x0004002C + +#define VID_B_INT_MSK 0x00040030 +#define VID_B_MSK_BAD_PKT (1 << 20) +#define VID_B_MSK_VBI_OPC_ERR (1 << 17) +#define VID_B_MSK_OPC_ERR (1 << 16) +#define VID_B_MSK_VBI_SYNC (1 << 13) +#define VID_B_MSK_SYNC (1 << 12) +#define VID_B_MSK_VBI_OF (1 << 9) +#define VID_B_MSK_OF (1 << 8) +#define VID_B_MSK_VBI_RISCI2 (1 << 5) +#define VID_B_MSK_RISCI2 (1 << 4) +#define VID_B_MSK_VBI_RISCI1 (1 << 1) +#define VID_B_MSK_RISCI1 1 +#define VID_B_INT_STAT 0x00040034 +#define VID_B_INT_MSTAT 0x00040038 +#define VID_B_INT_SSTAT 0x0004003C + +#define VID_B_MSK_BAD_PKT (1 << 20) +#define VID_B_MSK_OPC_ERR (1 << 16) +#define VID_B_MSK_SYNC (1 << 12) +#define VID_B_MSK_OF (1 << 8) +#define VID_B_MSK_RISCI2 (1 << 4) +#define VID_B_MSK_RISCI1 1 + +#define VID_C_MSK_BAD_PKT (1 << 20) +#define VID_C_MSK_OPC_ERR (1 << 16) +#define VID_C_MSK_SYNC (1 << 12) +#define VID_C_MSK_OF (1 << 8) +#define VID_C_MSK_RISCI2 (1 << 4) +#define VID_C_MSK_RISCI1 1 + +/* A superset for testing purposes */ +#define VID_BC_MSK_BAD_PKT (1 << 20) +#define VID_BC_MSK_OPC_ERR (1 << 16) +#define VID_BC_MSK_SYNC (1 << 12) +#define VID_BC_MSK_OF (1 << 8) +#define VID_BC_MSK_VBI_RISCI2 (1 << 5) +#define VID_BC_MSK_RISCI2 (1 << 4) +#define VID_BC_MSK_VBI_RISCI1 (1 << 1) +#define VID_BC_MSK_RISCI1 1 + +#define VID_C_INT_MSK 0x00040040 +#define VID_C_INT_STAT 0x00040044 +#define VID_C_INT_MSTAT 0x00040048 +#define VID_C_INT_SSTAT 0x0004004C + +#define AUDIO_INT_INT_MSK 0x00040050 +#define AUDIO_INT_INT_STAT 0x00040054 +#define AUDIO_INT_INT_MSTAT 0x00040058 +#define AUDIO_INT_INT_SSTAT 0x0004005C + +#define AUDIO_EXT_INT_MSK 0x00040060 +#define AUDIO_EXT_INT_STAT 0x00040064 +#define AUDIO_EXT_INT_MSTAT 0x00040068 +#define AUDIO_EXT_INT_SSTAT 0x0004006C + +#define RDR_CFG0 0x00050000 +#define RDR_CFG1 0x00050004 +#define RDR_CFG2 0x00050008 +#define RDR_RDRCTL1 0x0005030c +#define RDR_TLCTL0 0x00050318 + +/* APB DMAC Current Buffer Pointer */ +#define DMA1_PTR1 0x00100000 +#define DMA2_PTR1 0x00100004 +#define DMA3_PTR1 0x00100008 +#define DMA4_PTR1 0x0010000C +#define DMA5_PTR1 0x00100010 +#define DMA6_PTR1 0x00100014 +#define DMA7_PTR1 0x00100018 +#define DMA8_PTR1 0x0010001C + +/* APB DMAC Current Table Pointer */ +#define DMA1_PTR2 0x00100040 +#define DMA2_PTR2 0x00100044 +#define DMA3_PTR2 0x00100048 +#define DMA4_PTR2 0x0010004C +#define DMA5_PTR2 0x00100050 +#define DMA6_PTR2 0x00100054 +#define DMA7_PTR2 0x00100058 +#define DMA8_PTR2 0x0010005C + +/* APB DMAC Buffer Limit */ +#define DMA1_CNT1 0x00100080 +#define DMA2_CNT1 0x00100084 +#define DMA3_CNT1 0x00100088 +#define DMA4_CNT1 0x0010008C +#define DMA5_CNT1 0x00100090 +#define DMA6_CNT1 0x00100094 +#define DMA7_CNT1 0x00100098 +#define DMA8_CNT1 0x0010009C + +/* APB DMAC Table Size */ +#define DMA1_CNT2 0x001000C0 +#define DMA2_CNT2 0x001000C4 +#define DMA3_CNT2 0x001000C8 +#define DMA4_CNT2 0x001000CC +#define DMA5_CNT2 0x001000D0 +#define DMA6_CNT2 0x001000D4 +#define DMA7_CNT2 0x001000D8 +#define DMA8_CNT2 0x001000DC + +/* Timer Counters */ +#define TM_CNT_LDW 0x00110000 +#define TM_CNT_UW 0x00110004 +#define TM_LMT_LDW 0x00110008 +#define TM_LMT_UW 0x0011000C + +/* GPIO */ +#define GP0_IO 0x00110010 +#define GPIO_ISM 0x00110014 +#define SOFT_RESET 0x0011001C + +/* GPIO (417 Microsoftcontroller) RW Data */ +#define MC417_RWD 0x00110020 + +/* GPIO (417 Microsoftcontroller) Output Enable, Low Active */ +#define MC417_OEN 0x00110024 +#define MC417_CTL 0x00110028 +#define ALT_PIN_OUT_SEL 0x0011002C +#define CLK_DELAY 0x00110048 +#define PAD_CTRL 0x0011004C + +/* Video A Interface */ +#define VID_A_GPCNT 0x00130020 +#define VBI_A_GPCNT 0x00130024 +#define VID_A_GPCNT_CTL 0x00130030 +#define VBI_A_GPCNT_CTL 0x00130034 +#define VID_A_DMA_CTL 0x00130040 +#define VID_A_VIP_CTRL 0x00130080 +#define VID_A_PIXEL_FRMT 0x00130084 +#define VID_A_VBI_CTRL 0x00130088 + +/* Video B Interface */ +#define VID_B_DMA 0x00130100 +#define VBI_B_DMA 0x00130108 +#define VID_B_GPCNT 0x00130120 +#define VBI_B_GPCNT 0x00130124 +#define VID_B_GPCNT_CTL 0x00130134 +#define VBI_B_GPCNT_CTL 0x00130138 +#define VID_B_DMA_CTL 0x00130140 +#define VID_B_SRC_SEL 0x00130144 +#define VID_B_LNGTH 0x00130150 +#define VID_B_HW_SOP_CTL 0x00130154 +#define VID_B_GEN_CTL 0x00130158 +#define VID_B_BD_PKT_STATUS 0x0013015C +#define VID_B_SOP_STATUS 0x00130160 +#define VID_B_FIFO_OVFL_STAT 0x00130164 +#define VID_B_VLD_MISC 0x00130168 +#define VID_B_TS_CLK_EN 0x0013016C +#define VID_B_VIP_CTRL 0x00130180 +#define VID_B_PIXEL_FRMT 0x00130184 + +/* Video C Interface */ +#define VID_C_GPCNT 0x00130220 +#define VID_C_GPCNT_CTL 0x00130230 +#define VBI_C_GPCNT_CTL 0x00130234 +#define VID_C_DMA_CTL 0x00130240 +#define VID_C_LNGTH 0x00130250 +#define VID_C_HW_SOP_CTL 0x00130254 +#define VID_C_GEN_CTL 0x00130258 +#define VID_C_BD_PKT_STATUS 0x0013025C +#define VID_C_SOP_STATUS 0x00130260 +#define VID_C_FIFO_OVFL_STAT 0x00130264 +#define VID_C_VLD_MISC 0x00130268 +#define VID_C_TS_CLK_EN 0x0013026C + +/* Internal Audio Interface */ +#define AUD_INT_A_GPCNT 0x00140020 +#define AUD_INT_B_GPCNT 0x00140024 +#define AUD_INT_A_GPCNT_CTL 0x00140030 +#define AUD_INT_B_GPCNT_CTL 0x00140034 +#define AUD_INT_DMA_CTL 0x00140040 +#define AUD_INT_A_LNGTH 0x00140050 +#define AUD_INT_B_LNGTH 0x00140054 +#define AUD_INT_A_MODE 0x00140058 +#define AUD_INT_B_MODE 0x0014005C + +/* External Audio Interface */ +#define AUD_EXT_DMA 0x00140100 +#define AUD_EXT_GPCNT 0x00140120 +#define AUD_EXT_GPCNT_CTL 0x00140130 +#define AUD_EXT_DMA_CTL 0x00140140 +#define AUD_EXT_LNGTH 0x00140150 +#define AUD_EXT_A_MODE 0x00140158 + +/* I2C Bus 1 */ +#define I2C1_ADDR 0x00180000 +#define I2C1_WDATA 0x00180004 +#define I2C1_CTRL 0x00180008 +#define I2C1_RDATA 0x0018000C +#define I2C1_STAT 0x00180010 + +/* I2C Bus 2 */ +#define I2C2_ADDR 0x00190000 +#define I2C2_WDATA 0x00190004 +#define I2C2_CTRL 0x00190008 +#define I2C2_RDATA 0x0019000C +#define I2C2_STAT 0x00190010 + +/* I2C Bus 3 */ +#define I2C3_ADDR 0x001A0000 +#define I2C3_WDATA 0x001A0004 +#define I2C3_CTRL 0x001A0008 +#define I2C3_RDATA 0x001A000C +#define I2C3_STAT 0x001A0010 + +/* UART */ +#define UART_CTL 0x001B0000 +#define UART_BRD 0x001B0004 +#define UART_ISR 0x001B000C +#define UART_CNT 0x001B0010 + +#endif /* _CX23885_REG_H_ */ diff --git a/drivers/media/pci/cx23885/cx23885-vbi.c b/drivers/media/pci/cx23885/cx23885-vbi.c new file mode 100644 index 00000000..a1154f03 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-vbi.c @@ -0,0 +1,295 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2007 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "cx23885.h" + +static unsigned int vbibufs = 4; +module_param(vbibufs, int, 0644); +MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32"); + +static unsigned int vbi_debug; +module_param(vbi_debug, int, 0644); +MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]"); + +#define dprintk(level, fmt, arg...)\ + do { if (vbi_debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) + +/* ------------------------------------------------------------------ */ + +#define VBI_LINE_LENGTH 1440 +#define NTSC_VBI_START_LINE 10 /* line 10 - 21 */ +#define NTSC_VBI_END_LINE 21 +#define NTSC_VBI_LINES (NTSC_VBI_END_LINE - NTSC_VBI_START_LINE + 1) + + +int cx23885_vbi_fmt(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (dev->tvnorm & V4L2_STD_525_60) { + /* ntsc */ + f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH; + f->fmt.vbi.sampling_rate = 27000000; + f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; + f->fmt.vbi.offset = 0; + f->fmt.vbi.flags = 0; + f->fmt.vbi.start[0] = 10; + f->fmt.vbi.count[0] = 17; + f->fmt.vbi.start[1] = 263 + 10 + 1; + f->fmt.vbi.count[1] = 17; + } else if (dev->tvnorm & V4L2_STD_625_50) { + /* pal */ + f->fmt.vbi.sampling_rate = 35468950; + f->fmt.vbi.start[0] = 7 - 1; + f->fmt.vbi.start[1] = 319 - 1; + } + + return 0; +} + +/* We're given the Video Interrupt status register. + * The cx23885_video_irq() func has already validated + * the potential error bits, we just need to + * deal with vbi payload and return indication if + * we actually processed any payload. + */ +int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status) +{ + u32 count; + int handled = 0; + + if (status & VID_BC_MSK_VBI_RISCI1) { + dprintk(1, "%s() VID_BC_MSK_VBI_RISCI1\n", __func__); + spin_lock(&dev->slock); + count = cx_read(VID_A_GPCNT); + cx23885_video_wakeup(dev, &dev->vbiq, count); + spin_unlock(&dev->slock); + handled++; + } + + if (status & VID_BC_MSK_VBI_RISCI2) { + dprintk(1, "%s() VID_BC_MSK_VBI_RISCI2\n", __func__); + dprintk(2, "stopper vbi\n"); + spin_lock(&dev->slock); + cx23885_restart_vbi_queue(dev, &dev->vbiq); + spin_unlock(&dev->slock); + handled++; + } + + return handled; +} + +static int cx23885_start_vbi_dma(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, + struct cx23885_buffer *buf) +{ + dprintk(1, "%s()\n", __func__); + + /* setup fifo + format */ + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], + buf->vb.width, buf->risc.dma); + + /* reset counter */ + cx_write(VID_A_GPCNT_CTL, 3); + cx_write(VID_A_VBI_CTRL, 3); + cx_write(VBI_A_GPCNT_CTL, 3); + q->count = 1; + + /* enable irq */ + cx23885_irq_add_enable(dev, 0x01); + cx_set(VID_A_INT_MSK, 0x000022); + + /* start dma */ + cx_set(DEV_CNTRL2, (1<<5)); + cx_set(VID_A_DMA_CTL, 0x22); /* FIFO and RISC enable */ + + return 0; +} + + +int cx23885_restart_vbi_queue(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q) +{ + struct cx23885_buffer *buf; + struct list_head *item; + + if (list_empty(&q->active)) + return 0; + + buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx23885_start_vbi_dma(dev, q, buf); + list_for_each(item, &q->active) { + buf = list_entry(item, struct cx23885_buffer, vb.queue); + buf->count = q->count++; + } + mod_timer(&q->timeout, jiffies + (BUFFER_TIMEOUT / 30)); + return 0; +} + +void cx23885_vbi_timeout(unsigned long data) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)data; + struct cx23885_dmaqueue *q = &dev->vbiq; + struct cx23885_buffer *buf; + unsigned long flags; + + /* Stop the VBI engine */ + cx_clear(VID_A_DMA_CTL, 0x22); + + spin_lock_irqsave(&dev->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx23885_buffer, + vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", dev->name, + buf, buf->vb.i, (unsigned long)buf->risc.dma); + } + cx23885_restart_vbi_queue(dev, q); + spin_unlock_irqrestore(&dev->slock, flags); +} + +/* ------------------------------------------------------------------ */ +#define VBI_LINE_LENGTH 1440 +#define VBI_LINE_COUNT 17 + +static int +vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + *size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; + if (0 == *count) + *count = vbibufs; + if (*count < 2) + *count = 2; + if (*count > 32) + *count = 32; + return 0; +} + +static int +vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + unsigned int size; + int rc; + + size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + buf->vb.width = VBI_LINE_LENGTH; + buf->vb.height = VBI_LINE_COUNT; + buf->vb.size = size; + buf->vb.field = V4L2_FIELD_SEQ_TB; + + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) + goto fail; + cx23885_risc_vbibuffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->vb.width * buf->vb.height, + buf->vb.width, 0, + buf->vb.height); + } + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx23885_free_buffer(q, buf); + return rc; +} + +static void +vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + struct cx23885_buffer *prev; + struct cx23885_fh *fh = vq->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_dmaqueue *q = &dev->vbiq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue, &q->active); + cx23885_start_vbi_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies + (BUFFER_TIMEOUT / 30)); + dprintk(2, "[%p/%d] vbi_queue - first active\n", + buf, buf->vb.i); + + } else { + prev = list_entry(q->active.prev, struct cx23885_buffer, + vb.queue); + list_add_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63-32 */ + dprintk(2, "[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + } +} + +static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + + cx23885_free_buffer(q, buf); +} + +struct videobuf_queue_ops cx23885_vbi_qops = { + .buf_setup = vbi_setup, + .buf_prepare = vbi_prepare, + .buf_queue = vbi_queue, + .buf_release = vbi_release, +}; + +/* ------------------------------------------------------------------ */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c new file mode 100644 index 00000000..ed08c89a --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-video.c @@ -0,0 +1,1939 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2007 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx23885.h" +#include +#include +#include "cx23885-ioctl.h" +#include "tuner-xc2028.h" + +#include + +MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards"); +MODULE_AUTHOR("Steven Toth "); +MODULE_LICENSE("GPL"); + +/* ------------------------------------------------------------------ */ + +static unsigned int video_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; +static unsigned int vbi_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; +static unsigned int radio_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; + +module_param_array(video_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); +module_param_array(radio_nr, int, NULL, 0444); + +MODULE_PARM_DESC(video_nr, "video device numbers"); +MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); +MODULE_PARM_DESC(radio_nr, "radio device numbers"); + +static unsigned int video_debug; +module_param(video_debug, int, 0644); +MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); + +static unsigned int irq_debug; +module_param(irq_debug, int, 0644); +MODULE_PARM_DESC(irq_debug, "enable debug messages [IRQ handler]"); + +static unsigned int vid_limit = 16; +module_param(vid_limit, int, 0644); +MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); + +#define dprintk(level, fmt, arg...)\ + do { if (video_debug >= level)\ + printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ + } while (0) + +/* ------------------------------------------------------------------- */ +/* static data */ + +#define FORMAT_FLAGS_PACKED 0x01 +#if 0 +static struct cx23885_fmt formats[] = { + { + .name = "8 bpp, gray", + .fourcc = V4L2_PIX_FMT_GREY, + .depth = 8, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "15 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB555, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "15 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB555X, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "16 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "16 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB565X, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "24 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR24, + .depth = 24, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "32 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR32, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "32 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB32, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, +}; +#else +static struct cx23885_fmt formats[] = { + { +#if 0 + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { +#endif + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + } +}; +#endif + +static struct cx23885_fmt *format_by_fourcc(unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) + if (formats[i].fourcc == fourcc) + return formats+i; + + printk(KERN_ERR "%s(%c%c%c%c) NOT FOUND\n", __func__, + (fourcc & 0xff), + ((fourcc >> 8) & 0xff), + ((fourcc >> 16) & 0xff), + ((fourcc >> 24) & 0xff) + ); + return NULL; +} + +/* ------------------------------------------------------------------- */ + +static const struct v4l2_queryctrl no_ctl = { + .name = "42", + .flags = V4L2_CTRL_FLAG_DISABLED, +}; + +static struct cx23885_ctrl cx23885_ctls[] = { + /* --- video --- */ + { + .v = { + .id = V4L2_CID_BRIGHTNESS, + .name = "Brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 1, + .default_value = 0x7f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 128, + .reg = LUMA_CTRL, + .mask = 0x00ff, + .shift = 0, + }, { + .v = { + .id = V4L2_CID_CONTRAST, + .name = "Contrast", + .minimum = 0, + .maximum = 0x7f, + .step = 1, + .default_value = 0x3f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 0, + .reg = LUMA_CTRL, + .mask = 0xff00, + .shift = 8, + }, { + .v = { + .id = V4L2_CID_HUE, + .name = "Hue", + .minimum = -127, + .maximum = 128, + .step = 1, + .default_value = 0x0, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 128, + .reg = CHROMA_CTRL, + .mask = 0xff0000, + .shift = 16, + }, { + /* strictly, this only describes only U saturation. + * V saturation is handled specially through code. + */ + .v = { + .id = V4L2_CID_SATURATION, + .name = "Saturation", + .minimum = 0, + .maximum = 0x7f, + .step = 1, + .default_value = 0x3f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 0, + .reg = CHROMA_CTRL, + .mask = 0x00ff, + .shift = 0, + }, { + /* --- audio --- */ + .v = { + .id = V4L2_CID_AUDIO_MUTE, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .default_value = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + }, + .reg = PATH1_CTL1, + .mask = (0x1f << 24), + .shift = 24, + }, { + .v = { + .id = V4L2_CID_AUDIO_VOLUME, + .name = "Volume", + .minimum = 0, + .maximum = 65535, + .step = 65535 / 100, + .default_value = 65535, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .reg = PATH1_VOL_CTL, + .mask = 0xff, + .shift = 0, + } +}; +static const int CX23885_CTLS = ARRAY_SIZE(cx23885_ctls); + +/* Must be sorted from low to high control ID! */ +static const u32 cx23885_user_ctrls[] = { + V4L2_CID_USER_CLASS, + V4L2_CID_BRIGHTNESS, + V4L2_CID_CONTRAST, + V4L2_CID_SATURATION, + V4L2_CID_HUE, + V4L2_CID_AUDIO_VOLUME, + V4L2_CID_AUDIO_MUTE, + 0 +}; + +static const u32 *ctrl_classes[] = { + cx23885_user_ctrls, + NULL +}; + +void cx23885_video_wakeup(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, u32 count) +{ + struct cx23885_buffer *buf; + int bc; + + for (bc = 0;; bc++) { + if (list_empty(&q->active)) + break; + buf = list_entry(q->active.next, + struct cx23885_buffer, vb.queue); + + /* count comes from the hw and is is 16bit wide -- + * this trick handles wrap-arounds correctly for + * up to 32767 buffers in flight... */ + if ((s16) (count - buf->count) < 0) + break; + + v4l2_get_timestamp(&buf->vb.ts); + dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i, + count, buf->count); + buf->vb.state = VIDEOBUF_DONE; + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); + } + if (list_empty(&q->active)) + del_timer(&q->timeout); + else + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + if (bc != 1) + printk(KERN_ERR "%s: %d buffers handled (should be 1)\n", + __func__, bc); +} + +int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) +{ + dprintk(1, "%s(norm = 0x%08x) name: [%s]\n", + __func__, + (unsigned int)norm, + v4l2_norm_to_name(norm)); + + dev->tvnorm = norm; + + call_all(dev, core, s_std, norm); + + return 0; +} + +static struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, + struct pci_dev *pci, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + dprintk(1, "%s()\n", __func__); + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + vfd->v4l2_dev = &dev->v4l2_dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), "%s (%s)", + cx23885_boards[dev->board].name, type); + video_set_drvdata(vfd, dev); + return vfd; +} + +static int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) +{ + int i; + + if (qctrl->id < V4L2_CID_BASE || + qctrl->id >= V4L2_CID_LASTP1) + return -EINVAL; + for (i = 0; i < CX23885_CTLS; i++) + if (cx23885_ctls[i].v.id == qctrl->id) + break; + if (i == CX23885_CTLS) { + *qctrl = no_ctl; + return 0; + } + *qctrl = cx23885_ctls[i].v; + return 0; +} + +/* ------------------------------------------------------------------- */ +/* resource management */ + +static int res_get(struct cx23885_dev *dev, struct cx23885_fh *fh, + unsigned int bit) +{ + dprintk(1, "%s()\n", __func__); + if (fh->resources & bit) + /* have it already allocated */ + return 1; + + /* is it free? */ + mutex_lock(&dev->lock); + if (dev->resources & bit) { + /* no, someone else uses it */ + mutex_unlock(&dev->lock); + return 0; + } + /* it's free, grab it */ + fh->resources |= bit; + dev->resources |= bit; + dprintk(1, "res: get %d\n", bit); + mutex_unlock(&dev->lock); + return 1; +} + +static int res_check(struct cx23885_fh *fh, unsigned int bit) +{ + return fh->resources & bit; +} + +static int res_locked(struct cx23885_dev *dev, unsigned int bit) +{ + return dev->resources & bit; +} + +static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh, + unsigned int bits) +{ + BUG_ON((fh->resources & bits) != bits); + dprintk(1, "%s()\n", __func__); + + mutex_lock(&dev->lock); + fh->resources &= ~bits; + dev->resources &= ~bits; + dprintk(1, "res: put %d\n", bits); + mutex_unlock(&dev->lock); +} + +static int cx23885_flatiron_write(struct cx23885_dev *dev, u8 reg, u8 data) +{ + /* 8 bit registers, 8 bit values */ + u8 buf[] = { reg, data }; + + struct i2c_msg msg = { .addr = 0x98 >> 1, + .flags = 0, .buf = buf, .len = 2 }; + + return i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg, 1); +} + +static u8 cx23885_flatiron_read(struct cx23885_dev *dev, u8 reg) +{ + /* 8 bit registers, 8 bit values */ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + { .addr = 0x98 >> 1, .flags = 0, .buf = b0, .len = 1 }, + { .addr = 0x98 >> 1, .flags = I2C_M_RD, .buf = b1, .len = 1 } + }; + + ret = i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg[0], 2); + if (ret != 2) + printk(KERN_ERR "%s() error\n", __func__); + + return b1[0]; +} + +static void cx23885_flatiron_dump(struct cx23885_dev *dev) +{ + int i; + dprintk(1, "Flatiron dump\n"); + for (i = 0; i < 0x24; i++) { + dprintk(1, "FI[%02x] = %02x\n", i, + cx23885_flatiron_read(dev, i)); + } +} + +static int cx23885_flatiron_mux(struct cx23885_dev *dev, int input) +{ + u8 val; + dprintk(1, "%s(input = %d)\n", __func__, input); + + if (input == 1) + val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) & ~FLD_CH_SEL; + else if (input == 2) + val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) | FLD_CH_SEL; + else + return -EINVAL; + + val |= 0x20; /* Enable clock to delta-sigma and dec filter */ + + cx23885_flatiron_write(dev, CH_PWR_CTRL1, val); + + /* Wake up */ + cx23885_flatiron_write(dev, CH_PWR_CTRL2, 0); + + if (video_debug) + cx23885_flatiron_dump(dev); + + return 0; +} + +static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) +{ + dprintk(1, "%s() video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n", + __func__, + input, INPUT(input)->vmux, + INPUT(input)->gpio0, INPUT(input)->gpio1, + INPUT(input)->gpio2, INPUT(input)->gpio3); + dev->input = input; + + if (dev->board == CX23885_BOARD_MYGICA_X8506 || + dev->board == CX23885_BOARD_MAGICPRO_PROHDTVE2 || + dev->board == CX23885_BOARD_MYGICA_X8507) { + /* Select Analog TV */ + if (INPUT(input)->type == CX23885_VMUX_TELEVISION) + cx23885_gpio_clear(dev, GPIO_0); + } + + /* Tell the internal A/V decoder */ + v4l2_subdev_call(dev->sd_cx25840, video, s_routing, + INPUT(input)->vmux, 0, 0); + + if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) || + (dev->board == CX23885_BOARD_MPX885) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) || + (dev->board == CX23885_BOARD_MYGICA_X8507) || + (dev->board == CX23885_BOARD_AVERMEDIA_HC81R)) { + /* Configure audio routing */ + v4l2_subdev_call(dev->sd_cx25840, audio, s_routing, + INPUT(input)->amux, 0, 0); + + if (INPUT(input)->amux == CX25840_AUDIO7) + cx23885_flatiron_mux(dev, 1); + else if (INPUT(input)->amux == CX25840_AUDIO6) + cx23885_flatiron_mux(dev, 2); + } + + return 0; +} + +static int cx23885_audio_mux(struct cx23885_dev *dev, unsigned int input) +{ + dprintk(1, "%s(input=%d)\n", __func__, input); + + /* The baseband video core of the cx23885 has two audio inputs. + * LR1 and LR2. In almost every single case so far only HVR1xxx + * cards we've only ever supported LR1. Time to support LR2, + * which is available via the optional white breakout header on + * the board. + * We'll use a could of existing enums in the card struct to allow + * devs to specify which baseband input they need, or just default + * to what we've always used. + */ + if (INPUT(input)->amux == CX25840_AUDIO7) + cx23885_flatiron_mux(dev, 1); + else if (INPUT(input)->amux == CX25840_AUDIO6) + cx23885_flatiron_mux(dev, 2); + else { + /* Not specifically defined, assume the default. */ + cx23885_flatiron_mux(dev, 1); + } + + return 0; +} + +/* ------------------------------------------------------------------ */ +static int cx23885_start_video_dma(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, + struct cx23885_buffer *buf) +{ + dprintk(1, "%s()\n", __func__); + + /* Stop the dma/fifo before we tamper with it's risc programs */ + cx_clear(VID_A_DMA_CTL, 0x11); + + /* setup fifo + format */ + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01], + buf->bpl, buf->risc.dma); + + /* reset counter */ + cx_write(VID_A_GPCNT_CTL, 3); + q->count = 1; + + /* enable irq */ + cx23885_irq_add_enable(dev, 0x01); + cx_set(VID_A_INT_MSK, 0x000011); + + /* start dma */ + cx_set(DEV_CNTRL2, (1<<5)); + cx_set(VID_A_DMA_CTL, 0x11); /* FIFO and RISC enable */ + + return 0; +} + + +static int cx23885_restart_video_queue(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q) +{ + struct cx23885_buffer *buf, *prev; + struct list_head *item; + dprintk(1, "%s()\n", __func__); + + if (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx23885_buffer, + vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx23885_start_video_dma(dev, q, buf); + list_for_each(item, &q->active) { + buf = list_entry(item, struct cx23885_buffer, + vb.queue); + buf->count = q->count++; + } + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + return 0; + } + + prev = NULL; + for (;;) { + if (list_empty(&q->queued)) + return 0; + buf = list_entry(q->queued.next, struct cx23885_buffer, + vb.queue); + if (NULL == prev) { + list_move_tail(&buf->vb.queue, &q->active); + cx23885_start_video_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] restart_queue - first active\n", + buf, buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_move_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63 - 32 */ + dprintk(2, "[%p/%d] restart_queue - move to active\n", + buf, buf->vb.i); + } else { + return 0; + } + prev = buf; + } +} + +static int buffer_setup(struct videobuf_queue *q, unsigned int *count, + unsigned int *size) +{ + struct cx23885_fh *fh = q->priv_data; + + *size = fh->fmt->depth*fh->width*fh->height >> 3; + if (0 == *count) + *count = 32; + if (*size * *count > vid_limit * 1024 * 1024) + *count = (vid_limit * 1024 * 1024) / *size; + return 0; +} + +static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + int rc, init_buffer = 0; + u32 line0_offset, line1_offset; + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + int field_tff; + + BUG_ON(NULL == fh->fmt); + if (fh->width < 48 || fh->width > norm_maxw(dev->tvnorm) || + fh->height < 32 || fh->height > norm_maxh(dev->tvnorm)) + return -EINVAL; + buf->vb.size = (fh->width * fh->height * fh->fmt->depth) >> 3; + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != fh->fmt || + buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.field != field) { + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + init_buffer = 1; + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + init_buffer = 1; + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) + goto fail; + } + + if (init_buffer) { + buf->bpl = buf->vb.width * buf->fmt->depth >> 3; + switch (buf->vb.field) { + case V4L2_FIELD_TOP: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, 0, UNSET, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_BOTTOM: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, UNSET, 0, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_INTERLACED: + if (dev->tvnorm & V4L2_STD_NTSC) + /* NTSC or */ + field_tff = 1; + else + field_tff = 0; + + if (cx23885_boards[dev->board].force_bff) + /* PAL / SECAM OR 888 in NTSC MODE */ + field_tff = 0; + + if (field_tff) { + /* cx25840 transmits NTSC bottom field first */ + dprintk(1, "%s() Creating TFF/NTSC risc\n", + __func__); + line0_offset = buf->bpl; + line1_offset = 0; + } else { + /* All other formats are top field first */ + dprintk(1, "%s() Creating BFF/PAL/SECAM risc\n", + __func__); + line0_offset = 0; + line1_offset = buf->bpl; + } + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, line0_offset, + line1_offset, + buf->bpl, buf->bpl, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_TB: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->bpl * (buf->vb.height >> 1), + buf->bpl, 0, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_BT: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + buf->bpl * (buf->vb.height >> 1), 0, + buf->bpl, 0, + buf->vb.height >> 1); + break; + default: + BUG(); + } + } + dprintk(2, "[%p/%d] buffer_prep - %dx%d %dbpp \"%s\" - dma=0x%08lx\n", + buf, buf->vb.i, + fh->width, fh->height, fh->fmt->depth, fh->fmt->name, + (unsigned long)buf->risc.dma); + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx23885_free_buffer(q, buf); + return rc; +} + +static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + struct cx23885_buffer *prev; + struct cx23885_fh *fh = vq->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_dmaqueue *q = &dev->vidq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + if (!list_empty(&q->queued)) { + list_add_tail(&buf->vb.queue, &q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - append to queued\n", + buf, buf->vb.i); + + } else if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue, &q->active); + cx23885_start_video_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] buffer_queue - first active\n", + buf, buf->vb.i); + + } else { + prev = list_entry(q->active.prev, struct cx23885_buffer, + vb.queue); + if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_add_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + /* 64 bit bits 63-32 */ + prev->risc.jmp[2] = cpu_to_le32(0); + dprintk(2, "[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + + } else { + list_add_tail(&buf->vb.queue, &q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - first queued\n", + buf, buf->vb.i); + } + } +} + +static void buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + + cx23885_free_buffer(q, buf); +} + +static struct videobuf_queue_ops cx23885_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +static struct videobuf_queue *get_queue(struct cx23885_fh *fh) +{ + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &fh->vidq; + case V4L2_BUF_TYPE_VBI_CAPTURE: + return &fh->vbiq; + default: + BUG(); + return NULL; + } +} + +static int get_resource(struct cx23885_fh *fh) +{ + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return RESOURCE_VIDEO; + case V4L2_BUF_TYPE_VBI_CAPTURE: + return RESOURCE_VBI; + default: + BUG(); + return 0; + } +} + +static int video_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct cx23885_dev *dev = video_drvdata(file); + struct cx23885_fh *fh; + enum v4l2_buf_type type = 0; + int radio = 0; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + break; + case VFL_TYPE_VBI: + type = V4L2_BUF_TYPE_VBI_CAPTURE; + break; + case VFL_TYPE_RADIO: + radio = 1; + break; + } + + dprintk(1, "open dev=%s radio=%d type=%s\n", + video_device_node_name(vdev), radio, v4l2_type_names[type]); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + + file->private_data = fh; + fh->dev = dev; + fh->radio = radio; + fh->type = type; + fh->width = 320; + fh->height = 240; + fh->fmt = format_by_fourcc(V4L2_PIX_FMT_YUYV); + + videobuf_queue_sg_init(&fh->vidq, &cx23885_video_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx23885_buffer), + fh, NULL); + + videobuf_queue_sg_init(&fh->vbiq, &cx23885_vbi_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_FIELD_SEQ_TB, + sizeof(struct cx23885_buffer), + fh, NULL); + + + dprintk(1, "post videobuf_queue_init()\n"); + + return 0; +} + +static ssize_t video_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct cx23885_fh *fh = file->private_data; + + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (res_locked(fh->dev, RESOURCE_VIDEO)) + return -EBUSY; + return videobuf_read_one(&fh->vidq, data, count, ppos, + file->f_flags & O_NONBLOCK); + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (!res_get(fh->dev, fh, RESOURCE_VBI)) + return -EBUSY; + return videobuf_read_stream(&fh->vbiq, data, count, ppos, 1, + file->f_flags & O_NONBLOCK); + default: + BUG(); + return 0; + } +} + +static unsigned int video_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_buffer *buf; + unsigned int rc = POLLERR; + + if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { + if (!res_get(fh->dev, fh, RESOURCE_VBI)) + return POLLERR; + return videobuf_poll_stream(file, &fh->vbiq, wait); + } + + mutex_lock(&fh->vidq.vb_lock); + if (res_check(fh, RESOURCE_VIDEO)) { + /* streaming capture */ + if (list_empty(&fh->vidq.stream)) + goto done; + buf = list_entry(fh->vidq.stream.next, + struct cx23885_buffer, vb.stream); + } else { + /* read() capture */ + buf = (struct cx23885_buffer *)fh->vidq.read_buf; + if (NULL == buf) + goto done; + } + poll_wait(file, &buf->vb.done, wait); + if (buf->vb.state == VIDEOBUF_DONE || + buf->vb.state == VIDEOBUF_ERROR) + rc = POLLIN|POLLRDNORM; + else + rc = 0; +done: + mutex_unlock(&fh->vidq.vb_lock); + return rc; +} + +static int video_release(struct file *file) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + /* turn off overlay */ + if (res_check(fh, RESOURCE_OVERLAY)) { + /* FIXME */ + res_free(dev, fh, RESOURCE_OVERLAY); + } + + /* stop video capture */ + if (res_check(fh, RESOURCE_VIDEO)) { + videobuf_queue_cancel(&fh->vidq); + res_free(dev, fh, RESOURCE_VIDEO); + } + if (fh->vidq.read_buf) { + buffer_release(&fh->vidq, fh->vidq.read_buf); + kfree(fh->vidq.read_buf); + } + + /* stop vbi capture */ + if (res_check(fh, RESOURCE_VBI)) { + if (fh->vbiq.streaming) + videobuf_streamoff(&fh->vbiq); + if (fh->vbiq.reading) + videobuf_read_stop(&fh->vbiq); + res_free(dev, fh, RESOURCE_VBI); + } + + videobuf_mmap_free(&fh->vidq); + videobuf_mmap_free(&fh->vbiq); + + file->private_data = NULL; + kfree(fh); + + /* We are not putting the tuner to sleep here on exit, because + * we want to use the mpeg encoder in another session to capture + * tuner video. Closing this will result in no video to the encoder. + */ + + return 0; +} + +static int video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_mmap_mapper(get_queue(fh), vma); +} + +/* ------------------------------------------------------------------ */ +/* VIDEO CTRL IOCTLS */ + +int cx23885_get_control(struct cx23885_dev *dev, + struct v4l2_control *ctl) +{ + dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__); + call_all(dev, core, g_ctrl, ctl); + return 0; +} + +int cx23885_set_control(struct cx23885_dev *dev, + struct v4l2_control *ctl) +{ + dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)\n", __func__); + call_all(dev, core, s_ctrl, ctl); + + return 0; +} + +static void init_controls(struct cx23885_dev *dev) +{ + struct v4l2_control ctrl; + int i; + + for (i = 0; i < CX23885_CTLS; i++) { + ctrl.id = cx23885_ctls[i].v.id; + ctrl.value = cx23885_ctls[i].v.default_value; + + cx23885_set_control(dev, &ctrl); + } +} + +/* ------------------------------------------------------------------ */ +/* VIDEO IOCTLS */ + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vidq.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + struct cx23885_fmt *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + + field = f->fmt.pix.field; + maxw = norm_maxw(dev->tvnorm); + maxh = norm_maxh(dev->tvnorm); + + if (V4L2_FIELD_ANY == field) { + field = (f->fmt.pix.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; + } + + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } + + f->fmt.pix.field = field; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + struct v4l2_mbus_framefmt mbus_fmt; + int err; + + dprintk(2, "%s()\n", __func__); + err = vidioc_try_fmt_vid_cap(file, priv, f); + + if (0 != err) + return err; + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->vidq.field = f->fmt.pix.field; + dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, + fh->width, fh->height, fh->vidq.field); + v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED); + call_all(dev, video, s_mbus_fmt, &mbus_fmt); + v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); + return 0; +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + strcpy(cap->driver, "cx23885"); + strlcpy(cap->card, cx23885_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci)); + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + V4L2_CAP_VBI_CAPTURE; + if (UNSET != dev->tuner_type) + cap->capabilities |= V4L2_CAP_TUNER; + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (unlikely(f->index >= ARRAY_SIZE(formats))) + return -EINVAL; + + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct cx23885_fh *fh = priv; + return videobuf_reqbufs(get_queue(fh), p); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return videobuf_querybuf(get_queue(fh), p); +} + +static int vidioc_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return videobuf_qbuf(get_queue(fh), p); +} + +static int vidioc_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return videobuf_dqbuf(get_queue(fh), p, + file->f_flags & O_NONBLOCK); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + dprintk(1, "%s()\n", __func__); + + if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + if (unlikely(i != fh->type)) + return -EINVAL; + + if (unlikely(!res_get(dev, fh, get_resource(fh)))) + return -EBUSY; + + /* Don't start VBI streaming unless vida streaming + * has already started. + */ + if ((fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) && + ((cx_read(VID_A_DMA_CTL) & 0x11) == 0)) + return -EINVAL; + + return videobuf_streamon(get_queue(fh)); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + int err, res; + dprintk(1, "%s()\n", __func__); + + if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + if (i != fh->type) + return -EINVAL; + + res = get_resource(fh); + err = videobuf_streamoff(get_queue(fh)); + if (err < 0) + return err; + res_free(dev, fh, res); + return 0; +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __func__); + + call_all(dev, core, g_std, id); + + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id tvnorms) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __func__); + + mutex_lock(&dev->lock); + cx23885_set_tvnorm(dev, tvnorms); + mutex_unlock(&dev->lock); + + return 0; +} + +int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) +{ + static const char *iname[] = { + [CX23885_VMUX_COMPOSITE1] = "Composite1", + [CX23885_VMUX_COMPOSITE2] = "Composite2", + [CX23885_VMUX_COMPOSITE3] = "Composite3", + [CX23885_VMUX_COMPOSITE4] = "Composite4", + [CX23885_VMUX_SVIDEO] = "S-Video", + [CX23885_VMUX_COMPONENT] = "Component", + [CX23885_VMUX_TELEVISION] = "Television", + [CX23885_VMUX_CABLE] = "Cable TV", + [CX23885_VMUX_DVB] = "DVB", + [CX23885_VMUX_DEBUG] = "for debug only", + }; + unsigned int n; + dprintk(1, "%s()\n", __func__); + + n = i->index; + if (n >= MAX_CX23885_INPUT) + return -EINVAL; + + if (0 == INPUT(n)->type) + return -EINVAL; + + i->index = n; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, iname[INPUT(n)->type]); + if ((CX23885_VMUX_TELEVISION == INPUT(n)->type) || + (CX23885_VMUX_CABLE == INPUT(n)->type)) { + i->type = V4L2_INPUT_TYPE_TUNER; + i->std = CX23885_NORMS; + } + + /* Two selectable audio inputs for non-tv inputs */ + if (INPUT(n)->type != CX23885_VMUX_TELEVISION) + i->audioset = 0x3; + + if (dev->input == n) { + /* enum'd input matches our configured input. + * Ask the video decoder to process the call + * and give it an oppertunity to update the + * status field. + */ + call_all(dev, video, g_input_status, &i->status); + } + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __func__); + return cx23885_enum_input(dev, i); +} + +int cx23885_get_input(struct file *file, void *priv, unsigned int *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + *i = dev->input; + dprintk(1, "%s() returns %d\n", __func__, *i); + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + return cx23885_get_input(file, priv, i); +} + +int cx23885_set_input(struct file *file, void *priv, unsigned int i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + dprintk(1, "%s(%d)\n", __func__, i); + + if (i >= MAX_CX23885_INPUT) { + dprintk(1, "%s() -EINVAL\n", __func__); + return -EINVAL; + } + + if (INPUT(i)->type == 0) + return -EINVAL; + + mutex_lock(&dev->lock); + cx23885_video_mux(dev, i); + + /* By default establish the default audio input for the card also */ + /* Caller is free to use VIDIOC_S_AUDIO to override afterwards */ + cx23885_audio_mux(dev, i); + mutex_unlock(&dev->lock); + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + return cx23885_set_input(file, priv, i); +} + +static int vidioc_log_status(struct file *file, void *priv) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + printk(KERN_INFO + "%s/0: ============ START LOG STATUS ============\n", + dev->name); + call_all(dev, core, log_status); + printk(KERN_INFO + "%s/0: ============= END LOG STATUS =============\n", + dev->name); + return 0; +} + +static int cx23885_query_audinput(struct file *file, void *priv, + struct v4l2_audio *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + static const char *iname[] = { + [0] = "Baseband L/R 1", + [1] = "Baseband L/R 2", + }; + unsigned int n; + dprintk(1, "%s()\n", __func__); + + n = i->index; + if (n >= 2) + return -EINVAL; + + memset(i, 0, sizeof(*i)); + i->index = n; + strcpy(i->name, iname[n]); + i->capability = V4L2_AUDCAP_STEREO; + i->mode = V4L2_AUDMODE_AVL; + return 0; + +} + +static int vidioc_enum_audinput(struct file *file, void *priv, + struct v4l2_audio *i) +{ + return cx23885_query_audinput(file, priv, i); +} + +static int vidioc_g_audinput(struct file *file, void *priv, + struct v4l2_audio *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + i->index = dev->audinput; + dprintk(1, "%s(input=%d)\n", __func__, i->index); + + return cx23885_query_audinput(file, priv, i); +} + +static int vidioc_s_audinput(struct file *file, void *priv, + const struct v4l2_audio *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + if (i->index >= 2) + return -EINVAL; + + dprintk(1, "%s(%d)\n", __func__, i->index); + + dev->audinput = i->index; + + /* Skip the audio defaults from the cards struct, caller wants + * directly touch the audio mux hardware. */ + cx23885_flatiron_mux(dev, dev->audinput + 1); + return 0; +} + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qctrl) +{ + qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); + if (unlikely(qctrl->id == 0)) + return -EINVAL; + return cx23885_ctrl_query(qctrl); +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_get_control(dev, ctl); +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_set_control(dev, ctl); +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + strcpy(t->name, "Television"); + + call_all(dev, tuner, g_tuner, t); + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + /* Update the A/V core */ + call_all(dev, tuner, s_tuner, t); + + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + + /* f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; */ + f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; + f->frequency = dev->freq; + + call_all(dev, tuner, g_frequency, f); + + return 0; +} + +static int cx23885_set_freq(struct cx23885_dev *dev, const struct v4l2_frequency *f) +{ + struct v4l2_control ctrl; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + if (unlikely(f->tuner != 0)) + return -EINVAL; + + mutex_lock(&dev->lock); + dev->freq = f->frequency; + + /* I need to mute audio here */ + ctrl.id = V4L2_CID_AUDIO_MUTE; + ctrl.value = 1; + cx23885_set_control(dev, &ctrl); + + call_all(dev, tuner, s_frequency, f); + + /* When changing channels it is required to reset TVAUDIO */ + msleep(100); + + /* I need to unmute audio here */ + ctrl.value = 0; + cx23885_set_control(dev, &ctrl); + + mutex_unlock(&dev->lock); + + return 0; +} + +static int cx23885_set_freq_via_ops(struct cx23885_dev *dev, + const struct v4l2_frequency *f) +{ + struct v4l2_control ctrl; + struct videobuf_dvb_frontend *vfe; + struct dvb_frontend *fe; + + struct analog_parameters params = { + .mode = V4L2_TUNER_ANALOG_TV, + .audmode = V4L2_TUNER_MODE_STEREO, + .std = dev->tvnorm, + .frequency = f->frequency + }; + + mutex_lock(&dev->lock); + dev->freq = f->frequency; + + /* I need to mute audio here */ + ctrl.id = V4L2_CID_AUDIO_MUTE; + ctrl.value = 1; + cx23885_set_control(dev, &ctrl); + + /* If HVR1850 */ + dprintk(1, "%s() frequency=%d tuner=%d std=0x%llx\n", __func__, + params.frequency, f->tuner, params.std); + + vfe = videobuf_dvb_get_frontend(&dev->ts2.frontends, 1); + if (!vfe) { + mutex_unlock(&dev->lock); + return -EINVAL; + } + + fe = vfe->dvb.frontend; + + if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111)) + fe = &dev->ts1.analog_fe; + + if (fe && fe->ops.tuner_ops.set_analog_params) { + call_all(dev, core, s_std, dev->tvnorm); + fe->ops.tuner_ops.set_analog_params(fe, ¶ms); + } + else + printk(KERN_ERR "%s() No analog tuner, aborting\n", __func__); + + /* When changing channels it is required to reset TVAUDIO */ + msleep(100); + + /* I need to unmute audio here */ + ctrl.value = 0; + cx23885_set_control(dev, &ctrl); + + mutex_unlock(&dev->lock); + + return 0; +} + +int cx23885_set_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + int ret; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + ret = cx23885_set_freq_via_ops(dev, f); + break; + default: + ret = cx23885_set_freq(dev, f); + } + + return ret; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + return cx23885_set_frequency(file, priv, f); +} + +/* ----------------------------------------------------------- */ + +static void cx23885_vid_timeout(unsigned long data) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)data; + struct cx23885_dmaqueue *q = &dev->vidq; + struct cx23885_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&dev->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, + struct cx23885_buffer, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + printk(KERN_ERR "%s: [%p/%d] timeout - dma=0x%08lx\n", + dev->name, buf, buf->vb.i, + (unsigned long)buf->risc.dma); + } + cx23885_restart_video_queue(dev, q); + spin_unlock_irqrestore(&dev->slock, flags); +} + +int cx23885_video_irq(struct cx23885_dev *dev, u32 status) +{ + u32 mask, count; + int handled = 0; + + mask = cx_read(VID_A_INT_MSK); + if (0 == (status & mask)) + return handled; + + cx_write(VID_A_INT_STAT, status); + + /* risc op code error, fifo overflow or line sync detection error */ + if ((status & VID_BC_MSK_OPC_ERR) || + (status & VID_BC_MSK_SYNC) || + (status & VID_BC_MSK_OF)) { + + if (status & VID_BC_MSK_OPC_ERR) { + dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", + VID_BC_MSK_OPC_ERR); + printk(KERN_WARNING "%s: video risc op code error\n", + dev->name); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[SRAM_CH01]); + } + + if (status & VID_BC_MSK_SYNC) + dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) " + "video lines miss-match\n", + VID_BC_MSK_SYNC); + + if (status & VID_BC_MSK_OF) + dprintk(7, " (VID_BC_MSK_OF 0x%08x) fifo overflow\n", + VID_BC_MSK_OF); + + } + + /* Video */ + if (status & VID_BC_MSK_RISCI1) { + spin_lock(&dev->slock); + count = cx_read(VID_A_GPCNT); + cx23885_video_wakeup(dev, &dev->vidq, count); + spin_unlock(&dev->slock); + handled++; + } + if (status & VID_BC_MSK_RISCI2) { + dprintk(2, "stopper video\n"); + spin_lock(&dev->slock); + cx23885_restart_video_queue(dev, &dev->vidq); + spin_unlock(&dev->slock); + handled++; + } + + /* Allow the VBI framework to process it's payload */ + handled += cx23885_vbi_irq(dev, status); + + return handled; +} + +/* ----------------------------------------------------------- */ +/* exported stuff */ + +static const struct v4l2_file_operations video_fops = { + .owner = THIS_MODULE, + .open = video_open, + .release = video_release, + .read = video_read, + .poll = video_poll, + .mmap = video_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops video_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_g_fmt_vbi_cap = cx23885_vbi_fmt, + .vidioc_try_fmt_vbi_cap = cx23885_vbi_fmt, + .vidioc_s_fmt_vbi_cap = cx23885_vbi_fmt, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_g_std = vidioc_g_std, + .vidioc_querystd = vidioc_g_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_log_status = vidioc_log_status, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_g_chip_ident = cx23885_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = cx23885_g_register, + .vidioc_s_register = cx23885_s_register, +#endif + .vidioc_enumaudio = vidioc_enum_audinput, + .vidioc_g_audio = vidioc_g_audinput, + .vidioc_s_audio = vidioc_s_audinput, +}; + +static struct video_device cx23885_vbi_template; +static struct video_device cx23885_video_template = { + .name = "cx23885-video", + .fops = &video_fops, + .ioctl_ops = &video_ioctl_ops, + .tvnorms = CX23885_NORMS, + .current_norm = V4L2_STD_NTSC_M, +}; + +static const struct v4l2_file_operations radio_fops = { + .owner = THIS_MODULE, + .open = video_open, + .release = video_release, + .ioctl = video_ioctl2, +}; + + +void cx23885_video_unregister(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + cx23885_irq_remove(dev, 0x01); + + if (dev->vbi_dev) { + if (video_is_registered(dev->vbi_dev)) + video_unregister_device(dev->vbi_dev); + else + video_device_release(dev->vbi_dev); + dev->vbi_dev = NULL; + btcx_riscmem_free(dev->pci, &dev->vbiq.stopper); + } + if (dev->video_dev) { + if (video_is_registered(dev->video_dev)) + video_unregister_device(dev->video_dev); + else + video_device_release(dev->video_dev); + dev->video_dev = NULL; + + btcx_riscmem_free(dev->pci, &dev->vidq.stopper); + } + + if (dev->audio_dev) + cx23885_audio_unregister(dev); +} + +int cx23885_video_register(struct cx23885_dev *dev) +{ + int err; + + dprintk(1, "%s()\n", __func__); + spin_lock_init(&dev->slock); + + /* Initialize VBI template */ + cx23885_vbi_template = cx23885_video_template; + strcpy(cx23885_vbi_template.name, "cx23885-vbi"); + + dev->tvnorm = cx23885_video_template.current_norm; + + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + dev->vidq.timeout.function = cx23885_vid_timeout; + dev->vidq.timeout.data = (unsigned long)dev; + init_timer(&dev->vidq.timeout); + cx23885_risc_stopper(dev->pci, &dev->vidq.stopper, + VID_A_DMA_CTL, 0x11, 0x00); + + /* init vbi dma queues */ + INIT_LIST_HEAD(&dev->vbiq.active); + INIT_LIST_HEAD(&dev->vbiq.queued); + dev->vbiq.timeout.function = cx23885_vbi_timeout; + dev->vbiq.timeout.data = (unsigned long)dev; + init_timer(&dev->vbiq.timeout); + cx23885_risc_stopper(dev->pci, &dev->vbiq.stopper, + VID_A_DMA_CTL, 0x22, 0x00); + + cx23885_irq_add_enable(dev, 0x01); + + if ((TUNER_ABSENT != dev->tuner_type) && + ((dev->tuner_bus == 0) || (dev->tuner_bus == 1))) { + struct v4l2_subdev *sd = NULL; + + if (dev->tuner_addr) + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_bus[dev->tuner_bus].i2c_adap, + "tuner", dev->tuner_addr, NULL); + else + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_bus[dev->tuner_bus].i2c_adap, + "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV)); + if (sd) { + struct tuner_setup tun_setup; + + memset(&tun_setup, 0, sizeof(tun_setup)); + tun_setup.mode_mask = T_ANALOG_TV; + tun_setup.type = dev->tuner_type; + tun_setup.addr = v4l2_i2c_subdev_addr(sd); + tun_setup.tuner_callback = cx23885_tuner_callback; + + v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup); + + if (dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXTV1200) { + struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64 + }; + struct v4l2_priv_tun_config cfg = { + .tuner = dev->tuner_type, + .priv = &ctrl + }; + v4l2_subdev_call(sd, tuner, s_config, &cfg); + } + + if (dev->board == CX23885_BOARD_AVERMEDIA_HC81R) { + struct xc2028_ctrl ctrl = { + .fname = "xc3028L-v36.fw", + .max_len = 64 + }; + struct v4l2_priv_tun_config cfg = { + .tuner = dev->tuner_type, + .priv = &ctrl + }; + v4l2_subdev_call(sd, tuner, s_config, &cfg); + } + } + } + + /* register Video device */ + dev->video_dev = cx23885_vdev_init(dev, dev->pci, + &cx23885_video_template, "video"); + err = video_register_device(dev->video_dev, VFL_TYPE_GRABBER, + video_nr[dev->nr]); + if (err < 0) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); + goto fail_unreg; + } + printk(KERN_INFO "%s: registered device %s [v4l2]\n", + dev->name, video_device_node_name(dev->video_dev)); + + /* register VBI device */ + dev->vbi_dev = cx23885_vdev_init(dev, dev->pci, + &cx23885_vbi_template, "vbi"); + err = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, + vbi_nr[dev->nr]); + if (err < 0) { + printk(KERN_INFO "%s: can't register vbi device\n", + dev->name); + goto fail_unreg; + } + printk(KERN_INFO "%s: registered device %s\n", + dev->name, video_device_node_name(dev->vbi_dev)); + + /* Register ALSA audio device */ + dev->audio_dev = cx23885_audio_register(dev); + + /* initial device configuration */ + mutex_lock(&dev->lock); + cx23885_set_tvnorm(dev, dev->tvnorm); + init_controls(dev); + cx23885_video_mux(dev, 0); + cx23885_audio_mux(dev, 0); + mutex_unlock(&dev->lock); + + return 0; + +fail_unreg: + cx23885_video_unregister(dev); + return err; +} + diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h new file mode 100644 index 00000000..5687d3f6 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885.h @@ -0,0 +1,656 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "btcx-risc.h" +#include "cx23885-reg.h" +#include "media/cx2341x.h" + +#include + +#define CX23885_VERSION "0.0.3" + +#define UNSET (-1U) + +#define CX23885_MAXBOARDS 8 + +/* Max number of inputs by card */ +#define MAX_CX23885_INPUT 8 +#define INPUT(nr) (&cx23885_boards[dev->board].input[nr]) +#define RESOURCE_OVERLAY 1 +#define RESOURCE_VIDEO 2 +#define RESOURCE_VBI 4 + +#define BUFFER_TIMEOUT (HZ) /* 0.5 seconds */ + +#define CX23885_BOARD_NOAUTO UNSET +#define CX23885_BOARD_UNKNOWN 0 +#define CX23885_BOARD_HAUPPAUGE_HVR1800lp 1 +#define CX23885_BOARD_HAUPPAUGE_HVR1800 2 +#define CX23885_BOARD_HAUPPAUGE_HVR1250 3 +#define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP 4 +#define CX23885_BOARD_HAUPPAUGE_HVR1500Q 5 +#define CX23885_BOARD_HAUPPAUGE_HVR1500 6 +#define CX23885_BOARD_HAUPPAUGE_HVR1200 7 +#define CX23885_BOARD_HAUPPAUGE_HVR1700 8 +#define CX23885_BOARD_HAUPPAUGE_HVR1400 9 +#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 +#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 +#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12 +#define CX23885_BOARD_COMPRO_VIDEOMATE_E650F 13 +#define CX23885_BOARD_TBS_6920 14 +#define CX23885_BOARD_TEVII_S470 15 +#define CX23885_BOARD_DVBWORLD_2005 16 +#define CX23885_BOARD_NETUP_DUAL_DVBS2_CI 17 +#define CX23885_BOARD_HAUPPAUGE_HVR1270 18 +#define CX23885_BOARD_HAUPPAUGE_HVR1275 19 +#define CX23885_BOARD_HAUPPAUGE_HVR1255 20 +#define CX23885_BOARD_HAUPPAUGE_HVR1210 21 +#define CX23885_BOARD_MYGICA_X8506 22 +#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23 +#define CX23885_BOARD_HAUPPAUGE_HVR1850 24 +#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25 +#define CX23885_BOARD_HAUPPAUGE_HVR1290 26 +#define CX23885_BOARD_MYGICA_X8558PRO 27 +#define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28 +#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29 +#define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30 +#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31 +#define CX23885_BOARD_MPX885 32 +#define CX23885_BOARD_MYGICA_X8507 33 +#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34 +#define CX23885_BOARD_TEVII_S471 35 +#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36 +#define CX23885_BOARD_PROF_8000 37 +#define CX23885_BOARD_HAUPPAUGE_HVR4400 38 +#define CX23885_BOARD_AVERMEDIA_HC81R 39 + +#define GPIO_0 0x00000001 +#define GPIO_1 0x00000002 +#define GPIO_2 0x00000004 +#define GPIO_3 0x00000008 +#define GPIO_4 0x00000010 +#define GPIO_5 0x00000020 +#define GPIO_6 0x00000040 +#define GPIO_7 0x00000080 +#define GPIO_8 0x00000100 +#define GPIO_9 0x00000200 +#define GPIO_10 0x00000400 +#define GPIO_11 0x00000800 +#define GPIO_12 0x00001000 +#define GPIO_13 0x00002000 +#define GPIO_14 0x00004000 +#define GPIO_15 0x00008000 + +/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ +#define CX23885_NORMS (\ + V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | \ + V4L2_STD_PAL_BG | V4L2_STD_PAL_DK | V4L2_STD_PAL_I | \ + V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | \ + V4L2_STD_PAL_60 | V4L2_STD_SECAM_L | V4L2_STD_SECAM_DK) + +struct cx23885_fmt { + char *name; + u32 fourcc; /* v4l2 format id */ + int depth; + int flags; + u32 cxformat; +}; + +struct cx23885_ctrl { + struct v4l2_queryctrl v; + u32 off; + u32 reg; + u32 mask; + u32 shift; +}; + +struct cx23885_tvnorm { + char *name; + v4l2_std_id id; + u32 cxiformat; + u32 cxoformat; +}; + +struct cx23885_fh { + struct cx23885_dev *dev; + enum v4l2_buf_type type; + int radio; + u32 resources; + + /* video overlay */ + struct v4l2_window win; + struct v4l2_clip *clips; + unsigned int nclips; + + /* video capture */ + struct cx23885_fmt *fmt; + unsigned int width, height; + + /* vbi capture */ + struct videobuf_queue vidq; + struct videobuf_queue vbiq; + + /* MPEG Encoder specifics ONLY */ + struct videobuf_queue mpegq; + atomic_t v4l_reading; +}; + +enum cx23885_itype { + CX23885_VMUX_COMPOSITE1 = 1, + CX23885_VMUX_COMPOSITE2, + CX23885_VMUX_COMPOSITE3, + CX23885_VMUX_COMPOSITE4, + CX23885_VMUX_SVIDEO, + CX23885_VMUX_COMPONENT, + CX23885_VMUX_TELEVISION, + CX23885_VMUX_CABLE, + CX23885_VMUX_DVB, + CX23885_VMUX_DEBUG, + CX23885_RADIO, +}; + +enum cx23885_src_sel_type { + CX23885_SRC_SEL_EXT_656_VIDEO = 0, + CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO +}; + +/* buffer for one video frame */ +struct cx23885_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + /* cx23885 specific */ + unsigned int bpl; + struct btcx_riscmem risc; + struct cx23885_fmt *fmt; + u32 count; +}; + +struct cx23885_input { + enum cx23885_itype type; + unsigned int vmux; + unsigned int amux; + u32 gpio0, gpio1, gpio2, gpio3; +}; + +typedef enum { + CX23885_MPEG_UNDEFINED = 0, + CX23885_MPEG_DVB, + CX23885_ANALOG_VIDEO, + CX23885_MPEG_ENCODER, +} port_t; + +struct cx23885_board { + char *name; + port_t porta, portb, portc; + int num_fds_portb, num_fds_portc; + unsigned int tuner_type; + unsigned int radio_type; + unsigned char tuner_addr; + unsigned char radio_addr; + unsigned int tuner_bus; + + /* Vendors can and do run the PCIe bridge at different + * clock rates, driven physically by crystals on the PCBs. + * The core has to accommodate this. This allows the user + * to add new boards with new frequencys. The value is + * expressed in Hz. + * + * The core framework will default this value based on + * current designs, but it can vary. + */ + u32 clk_freq; + struct cx23885_input input[MAX_CX23885_INPUT]; + int ci_type; /* for NetUP */ + /* Force bottom field first during DMA (888 workaround) */ + u32 force_bff; +}; + +struct cx23885_subid { + u16 subvendor; + u16 subdevice; + u32 card; +}; + +struct cx23885_i2c { + struct cx23885_dev *dev; + + int nr; + + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + u32 i2c_rc; + + /* 885 registers used for raw addess */ + u32 i2c_period; + u32 reg_ctrl; + u32 reg_stat; + u32 reg_addr; + u32 reg_rdata; + u32 reg_wdata; +}; + +struct cx23885_dmaqueue { + struct list_head active; + struct list_head queued; + struct timer_list timeout; + struct btcx_riscmem stopper; + u32 count; +}; + +struct cx23885_tsport { + struct cx23885_dev *dev; + + int nr; + int sram_chno; + + struct videobuf_dvb_frontends frontends; + + /* dma queues */ + struct cx23885_dmaqueue mpegq; + u32 ts_packet_size; + u32 ts_packet_count; + + int width; + int height; + + spinlock_t slock; + + /* registers */ + u32 reg_gpcnt; + u32 reg_gpcnt_ctl; + u32 reg_dma_ctl; + u32 reg_lngth; + u32 reg_hw_sop_ctrl; + u32 reg_gen_ctrl; + u32 reg_bd_pkt_status; + u32 reg_sop_status; + u32 reg_fifo_ovfl_stat; + u32 reg_vld_misc; + u32 reg_ts_clk_en; + u32 reg_ts_int_msk; + u32 reg_ts_int_stat; + u32 reg_src_sel; + + /* Default register vals */ + int pci_irqmask; + u32 dma_ctl_val; + u32 ts_int_msk_val; + u32 gen_ctrl_val; + u32 ts_clk_en_val; + u32 src_sel_val; + u32 vld_misc_val; + u32 hw_sop_ctrl_val; + + /* Allow a single tsport to have multiple frontends */ + u32 num_frontends; + void (*gate_ctrl)(struct cx23885_tsport *port, int open); + void *port_priv; + + /* Workaround for a temp dvb_frontend that the tuner can attached to */ + struct dvb_frontend analog_fe; +}; + +struct cx23885_kernel_ir { + struct cx23885_dev *cx; + char *name; + char *phys; + + struct rc_dev *rc; +}; + +struct cx23885_audio_buffer { + unsigned int bpl; + struct btcx_riscmem risc; + struct videobuf_dmabuf dma; +}; + +struct cx23885_audio_dev { + struct cx23885_dev *dev; + + struct pci_dev *pci; + + struct snd_card *card; + + spinlock_t lock; + + atomic_t count; + + unsigned int dma_size; + unsigned int period_size; + unsigned int num_periods; + + struct videobuf_dmabuf *dma_risc; + + struct cx23885_audio_buffer *buf; + + struct snd_pcm_substream *substream; +}; + +struct cx23885_dev { + atomic_t refcount; + struct v4l2_device v4l2_dev; + + /* pci stuff */ + struct pci_dev *pci; + unsigned char pci_rev, pci_lat; + int pci_bus, pci_slot; + u32 __iomem *lmmio; + u8 __iomem *bmmio; + int pci_irqmask; + spinlock_t pci_irqmask_lock; /* protects mask reg too */ + int hwrevision; + + /* This valud is board specific and is used to configure the + * AV core so we see nice clean and stable video and audio. */ + u32 clk_freq; + + /* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */ + struct cx23885_i2c i2c_bus[3]; + + int nr; + struct mutex lock; + struct mutex gpio_lock; + + /* board details */ + unsigned int board; + char name[32]; + + struct cx23885_tsport ts1, ts2; + + /* sram configuration */ + struct sram_channel *sram_channels; + + enum { + CX23885_BRIDGE_UNDEFINED = 0, + CX23885_BRIDGE_885 = 885, + CX23885_BRIDGE_887 = 887, + CX23885_BRIDGE_888 = 888, + } bridge; + + /* Analog video */ + u32 resources; + unsigned int input; + unsigned int audinput; /* Selectable audio input */ + u32 tvaudio; + v4l2_std_id tvnorm; + unsigned int tuner_type; + unsigned char tuner_addr; + unsigned int tuner_bus; + unsigned int radio_type; + unsigned char radio_addr; + unsigned int has_radio; + struct v4l2_subdev *sd_cx25840; + struct work_struct cx25840_work; + + /* Infrared */ + struct v4l2_subdev *sd_ir; + struct work_struct ir_rx_work; + unsigned long ir_rx_notifications; + struct work_struct ir_tx_work; + unsigned long ir_tx_notifications; + + struct cx23885_kernel_ir *kernel_ir; + atomic_t ir_input_stopping; + + /* V4l */ + u32 freq; + struct video_device *video_dev; + struct video_device *vbi_dev; + struct video_device *radio_dev; + + struct cx23885_dmaqueue vidq; + struct cx23885_dmaqueue vbiq; + spinlock_t slock; + + /* MPEG Encoder ONLY settings */ + u32 cx23417_mailbox; + struct cx2341x_mpeg_params mpeg_params; + struct video_device *v4l_device; + atomic_t v4l_reader_count; + struct cx23885_tvnorm encodernorm; + + /* Analog raw audio */ + struct cx23885_audio_dev *audio_dev; + +}; + +static inline struct cx23885_dev *to_cx23885(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct cx23885_dev, v4l2_dev); +} + +#define call_all(dev, o, f, args...) \ + v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args) + +#define CX23885_HW_888_IR (1 << 0) +#define CX23885_HW_AV_CORE (1 << 1) + +#define call_hw(dev, grpid, o, f, args...) \ + v4l2_device_call_all(&dev->v4l2_dev, grpid, o, f, ##args) + +extern struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw); + +#define SRAM_CH01 0 /* Video A */ +#define SRAM_CH02 1 /* VBI A */ +#define SRAM_CH03 2 /* Video B */ +#define SRAM_CH04 3 /* Transport via B */ +#define SRAM_CH05 4 /* VBI B */ +#define SRAM_CH06 5 /* Video C */ +#define SRAM_CH07 6 /* Transport via C */ +#define SRAM_CH08 7 /* Audio Internal A */ +#define SRAM_CH09 8 /* Audio Internal B */ +#define SRAM_CH10 9 /* Audio External */ +#define SRAM_CH11 10 /* COMB_3D_N */ +#define SRAM_CH12 11 /* Comb 3D N1 */ +#define SRAM_CH13 12 /* Comb 3D N2 */ +#define SRAM_CH14 13 /* MOE Vid */ +#define SRAM_CH15 14 /* MOE RSLT */ + +struct sram_channel { + char *name; + u32 cmds_start; + u32 ctrl_start; + u32 cdt; + u32 fifo_start; + u32 fifo_size; + u32 ptr1_reg; + u32 ptr2_reg; + u32 cnt1_reg; + u32 cnt2_reg; + u32 jumponly; +}; + +/* ----------------------------------------------------------- */ + +#define cx_read(reg) readl(dev->lmmio + ((reg)>>2)) +#define cx_write(reg, value) writel((value), dev->lmmio + ((reg)>>2)) + +#define cx_andor(reg, mask, value) \ + writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\ + ((value) & (mask)), dev->lmmio+((reg)>>2)) + +#define cx_set(reg, bit) cx_andor((reg), (bit), (bit)) +#define cx_clear(reg, bit) cx_andor((reg), (bit), 0) + +/* ----------------------------------------------------------- */ +/* cx23885-core.c */ + +extern int cx23885_sram_channel_setup(struct cx23885_dev *dev, + struct sram_channel *ch, + unsigned int bpl, u32 risc); + +extern void cx23885_sram_channel_dump(struct cx23885_dev *dev, + struct sram_channel *ch); + +extern int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value); + +extern int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int top_offset, unsigned int bottom_offset, + unsigned int bpl, unsigned int padding, unsigned int lines); + +extern int cx23885_risc_vbibuffer(struct pci_dev *pci, + struct btcx_riscmem *risc, struct scatterlist *sglist, + unsigned int top_offset, unsigned int bottom_offset, + unsigned int bpl, unsigned int padding, unsigned int lines); + +void cx23885_cancel_buffers(struct cx23885_tsport *port); + +extern int cx23885_restart_queue(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q); + +extern void cx23885_wakeup(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q, u32 count); + +extern void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask); +extern void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask); +extern u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask); +extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, + int asoutput); + +extern void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask); +extern void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask); +extern void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask); +extern void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask); + +/* ----------------------------------------------------------- */ +/* cx23885-cards.c */ +extern struct cx23885_board cx23885_boards[]; +extern const unsigned int cx23885_bcount; + +extern struct cx23885_subid cx23885_subids[]; +extern const unsigned int cx23885_idcount; + +extern int cx23885_tuner_callback(void *priv, int component, + int command, int arg); +extern void cx23885_card_list(struct cx23885_dev *dev); +extern int cx23885_ir_init(struct cx23885_dev *dev); +extern void cx23885_ir_pci_int_enable(struct cx23885_dev *dev); +extern void cx23885_ir_fini(struct cx23885_dev *dev); +extern void cx23885_gpio_setup(struct cx23885_dev *dev); +extern void cx23885_card_setup(struct cx23885_dev *dev); +extern void cx23885_card_setup_pre_i2c(struct cx23885_dev *dev); + +extern int cx23885_dvb_register(struct cx23885_tsport *port); +extern int cx23885_dvb_unregister(struct cx23885_tsport *port); + +extern int cx23885_buf_prepare(struct videobuf_queue *q, + struct cx23885_tsport *port, + struct cx23885_buffer *buf, + enum v4l2_field field); +extern void cx23885_buf_queue(struct cx23885_tsport *port, + struct cx23885_buffer *buf); +extern void cx23885_free_buffer(struct videobuf_queue *q, + struct cx23885_buffer *buf); + +/* ----------------------------------------------------------- */ +/* cx23885-video.c */ +/* Video */ +extern int cx23885_video_register(struct cx23885_dev *dev); +extern void cx23885_video_unregister(struct cx23885_dev *dev); +extern int cx23885_video_irq(struct cx23885_dev *dev, u32 status); +extern void cx23885_video_wakeup(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, u32 count); +int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i); +int cx23885_set_input(struct file *file, void *priv, unsigned int i); +int cx23885_get_input(struct file *file, void *priv, unsigned int *i); +int cx23885_set_frequency(struct file *file, void *priv, const struct v4l2_frequency *f); +int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl); +int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl); +int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm); + +/* ----------------------------------------------------------- */ +/* cx23885-vbi.c */ +extern int cx23885_vbi_fmt(struct file *file, void *priv, + struct v4l2_format *f); +extern void cx23885_vbi_timeout(unsigned long data); +extern struct videobuf_queue_ops cx23885_vbi_qops; +extern int cx23885_restart_vbi_queue(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q); +extern int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status); + +/* cx23885-i2c.c */ +extern int cx23885_i2c_register(struct cx23885_i2c *bus); +extern int cx23885_i2c_unregister(struct cx23885_i2c *bus); +extern void cx23885_av_clk(struct cx23885_dev *dev, int enable); + +/* ----------------------------------------------------------- */ +/* cx23885-417.c */ +extern int cx23885_417_register(struct cx23885_dev *dev); +extern void cx23885_417_unregister(struct cx23885_dev *dev); +extern int cx23885_irq_417(struct cx23885_dev *dev, u32 status); +extern void cx23885_417_check_encoder(struct cx23885_dev *dev); +extern void cx23885_mc417_init(struct cx23885_dev *dev); +extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value); +extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value); +extern int mc417_register_read(struct cx23885_dev *dev, + u16 address, u32 *value); +extern int mc417_register_write(struct cx23885_dev *dev, + u16 address, u32 value); +extern void mc417_gpio_set(struct cx23885_dev *dev, u32 mask); +extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask); +extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput); + +/* ----------------------------------------------------------- */ +/* cx23885-alsa.c */ +extern struct cx23885_audio_dev *cx23885_audio_register( + struct cx23885_dev *dev); +extern void cx23885_audio_unregister(struct cx23885_dev *dev); +extern int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask); +extern int cx23885_risc_databuffer(struct pci_dev *pci, + struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int bpl, + unsigned int lines, + unsigned int lpi); + +/* ----------------------------------------------------------- */ +/* tv norms */ + +static inline unsigned int norm_maxw(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 720 : 768; +} + +static inline unsigned int norm_maxh(v4l2_std_id norm) +{ + return (norm & V4L2_STD_625_50) ? 576 : 480; +} + +static inline unsigned int norm_swidth(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922; +} diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c new file mode 100644 index 00000000..fa672fe4 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23888-ir.c @@ -0,0 +1,1270 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * CX23888 Integrated Consumer Infrared Controller + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include + +#include +#include +#include + +#include "cx23885.h" +#include "cx23888-ir.h" + +static unsigned int ir_888_debug; +module_param(ir_888_debug, int, 0644); +MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]"); + +#define CX23888_IR_REG_BASE 0x170000 +/* + * These CX23888 register offsets have a straightforward one to one mapping + * to the CX23885 register offsets of 0x200 through 0x218 + */ +#define CX23888_IR_CNTRL_REG 0x170000 +#define CNTRL_WIN_3_3 0x00000000 +#define CNTRL_WIN_4_3 0x00000001 +#define CNTRL_WIN_3_4 0x00000002 +#define CNTRL_WIN_4_4 0x00000003 +#define CNTRL_WIN 0x00000003 +#define CNTRL_EDG_NONE 0x00000000 +#define CNTRL_EDG_FALL 0x00000004 +#define CNTRL_EDG_RISE 0x00000008 +#define CNTRL_EDG_BOTH 0x0000000C +#define CNTRL_EDG 0x0000000C +#define CNTRL_DMD 0x00000010 +#define CNTRL_MOD 0x00000020 +#define CNTRL_RFE 0x00000040 +#define CNTRL_TFE 0x00000080 +#define CNTRL_RXE 0x00000100 +#define CNTRL_TXE 0x00000200 +#define CNTRL_RIC 0x00000400 +#define CNTRL_TIC 0x00000800 +#define CNTRL_CPL 0x00001000 +#define CNTRL_LBM 0x00002000 +#define CNTRL_R 0x00004000 +/* CX23888 specific control flag */ +#define CNTRL_IVO 0x00008000 + +#define CX23888_IR_TXCLK_REG 0x170004 +#define TXCLK_TCD 0x0000FFFF + +#define CX23888_IR_RXCLK_REG 0x170008 +#define RXCLK_RCD 0x0000FFFF + +#define CX23888_IR_CDUTY_REG 0x17000C +#define CDUTY_CDC 0x0000000F + +#define CX23888_IR_STATS_REG 0x170010 +#define STATS_RTO 0x00000001 +#define STATS_ROR 0x00000002 +#define STATS_RBY 0x00000004 +#define STATS_TBY 0x00000008 +#define STATS_RSR 0x00000010 +#define STATS_TSR 0x00000020 + +#define CX23888_IR_IRQEN_REG 0x170014 +#define IRQEN_RTE 0x00000001 +#define IRQEN_ROE 0x00000002 +#define IRQEN_RSE 0x00000010 +#define IRQEN_TSE 0x00000020 + +#define CX23888_IR_FILTR_REG 0x170018 +#define FILTR_LPF 0x0000FFFF + +/* This register doesn't follow the pattern; it's 0x23C on a CX23885 */ +#define CX23888_IR_FIFO_REG 0x170040 +#define FIFO_RXTX 0x0000FFFF +#define FIFO_RXTX_LVL 0x00010000 +#define FIFO_RXTX_RTO 0x0001FFFF +#define FIFO_RX_NDV 0x00020000 +#define FIFO_RX_DEPTH 8 +#define FIFO_TX_DEPTH 8 + +/* CX23888 unique registers */ +#define CX23888_IR_SEEDP_REG 0x17001C +#define CX23888_IR_TIMOL_REG 0x170020 +#define CX23888_IR_WAKE0_REG 0x170024 +#define CX23888_IR_WAKE1_REG 0x170028 +#define CX23888_IR_WAKE2_REG 0x17002C +#define CX23888_IR_MASK0_REG 0x170030 +#define CX23888_IR_MASK1_REG 0x170034 +#define CX23888_IR_MAKS2_REG 0x170038 +#define CX23888_IR_DPIPG_REG 0x17003C +#define CX23888_IR_LEARN_REG 0x170044 + +#define CX23888_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */ +#define CX23888_IR_REFCLK_FREQ (CX23888_VIDCLK_FREQ / 2) + +/* + * We use this union internally for convenience, but callers to tx_write + * and rx_read will be expecting records of type struct ir_raw_event. + * Always ensure the size of this union is dictated by struct ir_raw_event. + */ +union cx23888_ir_fifo_rec { + u32 hw_fifo_data; + struct ir_raw_event ir_core_data; +}; + +#define CX23888_IR_RX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec)) +#define CX23888_IR_TX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec)) + +struct cx23888_ir_state { + struct v4l2_subdev sd; + struct cx23885_dev *dev; + u32 id; + u32 rev; + + struct v4l2_subdev_ir_parameters rx_params; + struct mutex rx_params_lock; + atomic_t rxclk_divider; + atomic_t rx_invert; + + struct kfifo rx_kfifo; + spinlock_t rx_kfifo_lock; + + struct v4l2_subdev_ir_parameters tx_params; + struct mutex tx_params_lock; + atomic_t txclk_divider; +}; + +static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd) +{ + return v4l2_get_subdevdata(sd); +} + +/* + * IR register block read and write functions + */ +static +inline int cx23888_ir_write4(struct cx23885_dev *dev, u32 addr, u32 value) +{ + cx_write(addr, value); + return 0; +} + +static inline u32 cx23888_ir_read4(struct cx23885_dev *dev, u32 addr) +{ + return cx_read(addr); +} + +static inline int cx23888_ir_and_or4(struct cx23885_dev *dev, u32 addr, + u32 and_mask, u32 or_value) +{ + cx_andor(addr, ~and_mask, or_value); + return 0; +} + +/* + * Rx and Tx Clock Divider register computations + * + * Note the largest clock divider value of 0xffff corresponds to: + * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns + * which fits in 21 bits, so we'll use unsigned int for time arguments. + */ +static inline u16 count_to_clock_divider(unsigned int d) +{ + if (d > RXCLK_RCD + 1) + d = RXCLK_RCD; + else if (d < 2) + d = 1; + else + d--; + return (u16) d; +} + +static inline u16 ns_to_clock_divider(unsigned int ns) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000)); +} + +static inline unsigned int clock_divider_to_ns(unsigned int divider) +{ + /* Period of the Rx or Tx clock in ns */ + return DIV_ROUND_CLOSEST((divider + 1) * 1000, + CX23888_IR_REFCLK_FREQ / 1000000); +} + +static inline u16 carrier_freq_to_clock_divider(unsigned int freq) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * 16)); +} + +static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider) +{ + return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, (divider + 1) * 16); +} + +static inline u16 freq_to_clock_divider(unsigned int freq, + unsigned int rollovers) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * rollovers)); +} + +static inline unsigned int clock_divider_to_freq(unsigned int divider, + unsigned int rollovers) +{ + return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, + (divider + 1) * rollovers); +} + +/* + * Low Pass Filter register calculations + * + * Note the largest count value of 0xffff corresponds to: + * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns + * which fits in 21 bits, so we'll use unsigned int for time arguments. + */ +static inline u16 count_to_lpf_count(unsigned int d) +{ + if (d > FILTR_LPF) + d = FILTR_LPF; + else if (d < 4) + d = 0; + return (u16) d; +} + +static inline u16 ns_to_lpf_count(unsigned int ns) +{ + return count_to_lpf_count( + DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000)); +} + +static inline unsigned int lpf_count_to_ns(unsigned int count) +{ + /* Duration of the Low Pass Filter rejection window in ns */ + return DIV_ROUND_CLOSEST(count * 1000, + CX23888_IR_REFCLK_FREQ / 1000000); +} + +static inline unsigned int lpf_count_to_us(unsigned int count) +{ + /* Duration of the Low Pass Filter rejection window in us */ + return DIV_ROUND_CLOSEST(count, CX23888_IR_REFCLK_FREQ / 1000000); +} + +/* + * FIFO register pulse width count compuations + */ +static u32 clock_divider_to_resolution(u16 divider) +{ + /* + * Resolution is the duration of 1 tick of the readable portion of + * of the pulse width counter as read from the FIFO. The two lsb's are + * not readable, hence the << 2. This function returns ns. + */ + return DIV_ROUND_CLOSEST((1 << 2) * ((u32) divider + 1) * 1000, + CX23888_IR_REFCLK_FREQ / 1000000); +} + +static u64 pulse_width_count_to_ns(u16 count, u16 divider) +{ + u64 n; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not readable, hence + * the (count << 2) | 0x3 + */ + n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */ + rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => ns */ + if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2) + n++; + return n; +} + +static unsigned int pulse_width_count_to_us(u16 count, u16 divider) +{ + u64 n; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not readable, hence + * the (count << 2) | 0x3 + */ + n = (((u64) count << 2) | 0x3) * (divider + 1); /* cycles */ + rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => us */ + if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2) + n++; + return (unsigned int) n; +} + +/* + * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts + * + * The total pulse clock count is an 18 bit pulse width timer count as the most + * significant part and (up to) 16 bit clock divider count as a modulus. + * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse + * width timer count's least significant bit. + */ +static u64 ns_to_pulse_clocks(u32 ns) +{ + u64 clocks; + u32 rem; + clocks = CX23888_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles */ + rem = do_div(clocks, 1000); /* /1000 = cycles */ + if (rem >= 1000 / 2) + clocks++; + return clocks; +} + +static u16 pulse_clocks_to_clock_divider(u64 count) +{ + do_div(count, (FIFO_RXTX << 2) | 0x3); + + /* net result needs to be rounded down and decremented by 1 */ + if (count > RXCLK_RCD + 1) + count = RXCLK_RCD; + else if (count < 2) + count = 1; + else + count--; + return (u16) count; +} + +/* + * IR Control Register helpers + */ +enum tx_fifo_watermark { + TX_FIFO_HALF_EMPTY = 0, + TX_FIFO_EMPTY = CNTRL_TIC, +}; + +enum rx_fifo_watermark { + RX_FIFO_HALF_FULL = 0, + RX_FIFO_NOT_EMPTY = CNTRL_RIC, +}; + +static inline void control_tx_irq_watermark(struct cx23885_dev *dev, + enum tx_fifo_watermark level) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_TIC, level); +} + +static inline void control_rx_irq_watermark(struct cx23885_dev *dev, + enum rx_fifo_watermark level) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_RIC, level); +} + +static inline void control_tx_enable(struct cx23885_dev *dev, bool enable) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE), + enable ? (CNTRL_TXE | CNTRL_TFE) : 0); +} + +static inline void control_rx_enable(struct cx23885_dev *dev, bool enable) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE), + enable ? (CNTRL_RXE | CNTRL_RFE) : 0); +} + +static inline void control_tx_modulation_enable(struct cx23885_dev *dev, + bool enable) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_MOD, + enable ? CNTRL_MOD : 0); +} + +static inline void control_rx_demodulation_enable(struct cx23885_dev *dev, + bool enable) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_DMD, + enable ? CNTRL_DMD : 0); +} + +static inline void control_rx_s_edge_detection(struct cx23885_dev *dev, + u32 edge_types) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_EDG_BOTH, + edge_types & CNTRL_EDG_BOTH); +} + +static void control_rx_s_carrier_window(struct cx23885_dev *dev, + unsigned int carrier, + unsigned int *carrier_range_low, + unsigned int *carrier_range_high) +{ + u32 v; + unsigned int c16 = carrier * 16; + + if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) { + v = CNTRL_WIN_3_4; + *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4); + } else { + v = CNTRL_WIN_3_3; + *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3); + } + + if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) { + v |= CNTRL_WIN_4_3; + *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4); + } else { + v |= CNTRL_WIN_3_3; + *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3); + } + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_WIN, v); +} + +static inline void control_tx_polarity_invert(struct cx23885_dev *dev, + bool invert) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_CPL, + invert ? CNTRL_CPL : 0); +} + +static inline void control_tx_level_invert(struct cx23885_dev *dev, + bool invert) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO, + invert ? CNTRL_IVO : 0); +} + +/* + * IR Rx & Tx Clock Register helpers + */ +static unsigned int txclk_tx_s_carrier(struct cx23885_dev *dev, + unsigned int freq, + u16 *divider) +{ + *divider = carrier_freq_to_clock_divider(freq); + cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider); + return clock_divider_to_carrier_freq(*divider); +} + +static unsigned int rxclk_rx_s_carrier(struct cx23885_dev *dev, + unsigned int freq, + u16 *divider) +{ + *divider = carrier_freq_to_clock_divider(freq); + cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider); + return clock_divider_to_carrier_freq(*divider); +} + +static u32 txclk_tx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns, + u16 *divider) +{ + u64 pulse_clocks; + + if (ns > IR_MAX_DURATION) + ns = IR_MAX_DURATION; + pulse_clocks = ns_to_pulse_clocks(ns); + *divider = pulse_clocks_to_clock_divider(pulse_clocks); + cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider); + return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider); +} + +static u32 rxclk_rx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns, + u16 *divider) +{ + u64 pulse_clocks; + + if (ns > IR_MAX_DURATION) + ns = IR_MAX_DURATION; + pulse_clocks = ns_to_pulse_clocks(ns); + *divider = pulse_clocks_to_clock_divider(pulse_clocks); + cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider); + return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider); +} + +/* + * IR Tx Carrier Duty Cycle register helpers + */ +static unsigned int cduty_tx_s_duty_cycle(struct cx23885_dev *dev, + unsigned int duty_cycle) +{ + u32 n; + n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */ + if (n != 0) + n--; + if (n > 15) + n = 15; + cx23888_ir_write4(dev, CX23888_IR_CDUTY_REG, n); + return DIV_ROUND_CLOSEST((n + 1) * 100, 16); +} + +/* + * IR Filter Register helpers + */ +static u32 filter_rx_s_min_width(struct cx23885_dev *dev, u32 min_width_ns) +{ + u32 count = ns_to_lpf_count(min_width_ns); + cx23888_ir_write4(dev, CX23888_IR_FILTR_REG, count); + return lpf_count_to_ns(count); +} + +/* + * IR IRQ Enable Register helpers + */ +static inline void irqenable_rx(struct cx23885_dev *dev, u32 mask) +{ + mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE); + cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG, + ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask); +} + +static inline void irqenable_tx(struct cx23885_dev *dev, u32 mask) +{ + mask &= IRQEN_TSE; + cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG, ~IRQEN_TSE, mask); +} + +/* + * V4L2 Subdevice IR Ops + */ +static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, + bool *handled) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + unsigned long flags; + + u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG); + u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG); + u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG); + + union cx23888_ir_fifo_rec rx_data[FIFO_RX_DEPTH]; + unsigned int i, j, k; + u32 events, v; + int tsr, rsr, rto, ror, tse, rse, rte, roe, kror; + + tsr = stats & STATS_TSR; /* Tx FIFO Service Request */ + rsr = stats & STATS_RSR; /* Rx FIFO Service Request */ + rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */ + ror = stats & STATS_ROR; /* Rx FIFO Over Run */ + + tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */ + rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */ + rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */ + roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */ + + *handled = false; + v4l2_dbg(2, ir_888_debug, sd, "IRQ Status: %s %s %s %s %s %s\n", + tsr ? "tsr" : " ", rsr ? "rsr" : " ", + rto ? "rto" : " ", ror ? "ror" : " ", + stats & STATS_TBY ? "tby" : " ", + stats & STATS_RBY ? "rby" : " "); + + v4l2_dbg(2, ir_888_debug, sd, "IRQ Enables: %s %s %s %s\n", + tse ? "tse" : " ", rse ? "rse" : " ", + rte ? "rte" : " ", roe ? "roe" : " "); + + /* + * Transmitter interrupt service + */ + if (tse && tsr) { + /* + * TODO: + * Check the watermark threshold setting + * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo + * Push the data to the hardware FIFO. + * If there was nothing more to send in the tx_kfifo, disable + * the TSR IRQ and notify the v4l2_device. + * If there was something in the tx_kfifo, check the tx_kfifo + * level and notify the v4l2_device, if it is low. + */ + /* For now, inhibit TSR interrupt until Tx is implemented */ + irqenable_tx(dev, 0); + events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ; + v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events); + *handled = true; + } + + /* + * Receiver interrupt service + */ + kror = 0; + if ((rse && rsr) || (rte && rto)) { + /* + * Receive data on RSR to clear the STATS_RSR. + * Receive data on RTO, since we may not have yet hit the RSR + * watermark when we receive the RTO. + */ + for (i = 0, v = FIFO_RX_NDV; + (v & FIFO_RX_NDV) && !kror; i = 0) { + for (j = 0; + (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) { + v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG); + rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV; + i++; + } + if (i == 0) + break; + j = i * sizeof(union cx23888_ir_fifo_rec); + k = kfifo_in_locked(&state->rx_kfifo, + (unsigned char *) rx_data, j, + &state->rx_kfifo_lock); + if (k != j) + kror++; /* rx_kfifo over run */ + } + *handled = true; + } + + events = 0; + v = 0; + if (kror) { + events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN; + v4l2_err(sd, "IR receiver software FIFO overrun\n"); + } + if (roe && ror) { + /* + * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear + * the Rx FIFO Over Run status (STATS_ROR) + */ + v |= CNTRL_RFE; + events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN; + v4l2_err(sd, "IR receiver hardware FIFO overrun\n"); + } + if (rte && rto) { + /* + * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear + * the Rx Pulse Width Timer Time Out (STATS_RTO) + */ + v |= CNTRL_RXE; + events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED; + } + if (v) { + /* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */ + cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl & ~v); + cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl); + *handled = true; + } + + spin_lock_irqsave(&state->rx_kfifo_lock, flags); + if (kfifo_len(&state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2) + events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ; + spin_unlock_irqrestore(&state->rx_kfifo_lock, flags); + + if (events) + v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events); + return 0; +} + +/* Receiver */ +static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num) +{ + struct cx23888_ir_state *state = to_state(sd); + bool invert = (bool) atomic_read(&state->rx_invert); + u16 divider = (u16) atomic_read(&state->rxclk_divider); + + unsigned int i, n; + union cx23888_ir_fifo_rec *p; + unsigned u, v, w; + + n = count / sizeof(union cx23888_ir_fifo_rec) + * sizeof(union cx23888_ir_fifo_rec); + if (n == 0) { + *num = 0; + return 0; + } + + n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock); + + n /= sizeof(union cx23888_ir_fifo_rec); + *num = n * sizeof(union cx23888_ir_fifo_rec); + + for (p = (union cx23888_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) { + + if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) { + /* Assume RTO was because of no IR light input */ + u = 0; + w = 1; + } else { + u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0; + if (invert) + u = u ? 0 : 1; + w = 0; + } + + v = (unsigned) pulse_width_count_to_ns( + (u16) (p->hw_fifo_data & FIFO_RXTX), divider); + if (v > IR_MAX_DURATION) + v = IR_MAX_DURATION; + + init_ir_raw_event(&p->ir_core_data); + p->ir_core_data.pulse = u; + p->ir_core_data.duration = v; + p->ir_core_data.timeout = w; + + v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s %s\n", + v, u ? "mark" : "space", w ? "(timed out)" : ""); + if (w) + v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n"); + } + return 0; +} + +static int cx23888_ir_rx_g_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx23888_ir_state *state = to_state(sd); + mutex_lock(&state->rx_params_lock); + memcpy(p, &state->rx_params, sizeof(struct v4l2_subdev_ir_parameters)); + mutex_unlock(&state->rx_params_lock); + return 0; +} + +static int cx23888_ir_rx_shutdown(struct v4l2_subdev *sd) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + + mutex_lock(&state->rx_params_lock); + + /* Disable or slow down all IR Rx circuits and counters */ + irqenable_rx(dev, 0); + control_rx_enable(dev, false); + control_rx_demodulation_enable(dev, false); + control_rx_s_edge_detection(dev, CNTRL_EDG_NONE); + filter_rx_s_min_width(dev, 0); + cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, RXCLK_RCD); + + state->rx_params.shutdown = true; + + mutex_unlock(&state->rx_params_lock); + return 0; +} + +static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + struct v4l2_subdev_ir_parameters *o = &state->rx_params; + u16 rxclk_divider; + + if (p->shutdown) + return cx23888_ir_rx_shutdown(sd); + + if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH) + return -ENOSYS; + + mutex_lock(&state->rx_params_lock); + + o->shutdown = p->shutdown; + + o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + + o->bytes_per_data_element = p->bytes_per_data_element + = sizeof(union cx23888_ir_fifo_rec); + + /* Before we tweak the hardware, we have to disable the receiver */ + irqenable_rx(dev, 0); + control_rx_enable(dev, false); + + control_rx_demodulation_enable(dev, p->modulation); + o->modulation = p->modulation; + + if (p->modulation) { + p->carrier_freq = rxclk_rx_s_carrier(dev, p->carrier_freq, + &rxclk_divider); + + o->carrier_freq = p->carrier_freq; + + o->duty_cycle = p->duty_cycle = 50; + + control_rx_s_carrier_window(dev, p->carrier_freq, + &p->carrier_range_lower, + &p->carrier_range_upper); + o->carrier_range_lower = p->carrier_range_lower; + o->carrier_range_upper = p->carrier_range_upper; + + p->max_pulse_width = + (u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider); + } else { + p->max_pulse_width = + rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width, + &rxclk_divider); + } + o->max_pulse_width = p->max_pulse_width; + atomic_set(&state->rxclk_divider, rxclk_divider); + + p->noise_filter_min_width = + filter_rx_s_min_width(dev, p->noise_filter_min_width); + o->noise_filter_min_width = p->noise_filter_min_width; + + p->resolution = clock_divider_to_resolution(rxclk_divider); + o->resolution = p->resolution; + + /* FIXME - make this dependent on resolution for better performance */ + control_rx_irq_watermark(dev, RX_FIFO_HALF_FULL); + + control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH); + + o->invert_level = p->invert_level; + atomic_set(&state->rx_invert, p->invert_level); + + o->interrupt_enable = p->interrupt_enable; + o->enable = p->enable; + if (p->enable) { + unsigned long flags; + + spin_lock_irqsave(&state->rx_kfifo_lock, flags); + kfifo_reset(&state->rx_kfifo); + /* reset tx_fifo too if there is one... */ + spin_unlock_irqrestore(&state->rx_kfifo_lock, flags); + if (p->interrupt_enable) + irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE); + control_rx_enable(dev, p->enable); + } + + mutex_unlock(&state->rx_params_lock); + return 0; +} + +/* Transmitter */ +static int cx23888_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + /* For now enable the Tx FIFO Service interrupt & pretend we did work */ + irqenable_tx(dev, IRQEN_TSE); + *num = count; + return 0; +} + +static int cx23888_ir_tx_g_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx23888_ir_state *state = to_state(sd); + mutex_lock(&state->tx_params_lock); + memcpy(p, &state->tx_params, sizeof(struct v4l2_subdev_ir_parameters)); + mutex_unlock(&state->tx_params_lock); + return 0; +} + +static int cx23888_ir_tx_shutdown(struct v4l2_subdev *sd) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + + mutex_lock(&state->tx_params_lock); + + /* Disable or slow down all IR Tx circuits and counters */ + irqenable_tx(dev, 0); + control_tx_enable(dev, false); + control_tx_modulation_enable(dev, false); + cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, TXCLK_TCD); + + state->tx_params.shutdown = true; + + mutex_unlock(&state->tx_params_lock); + return 0; +} + +static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + struct v4l2_subdev_ir_parameters *o = &state->tx_params; + u16 txclk_divider; + + if (p->shutdown) + return cx23888_ir_tx_shutdown(sd); + + if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH) + return -ENOSYS; + + mutex_lock(&state->tx_params_lock); + + o->shutdown = p->shutdown; + + o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + + o->bytes_per_data_element = p->bytes_per_data_element + = sizeof(union cx23888_ir_fifo_rec); + + /* Before we tweak the hardware, we have to disable the transmitter */ + irqenable_tx(dev, 0); + control_tx_enable(dev, false); + + control_tx_modulation_enable(dev, p->modulation); + o->modulation = p->modulation; + + if (p->modulation) { + p->carrier_freq = txclk_tx_s_carrier(dev, p->carrier_freq, + &txclk_divider); + o->carrier_freq = p->carrier_freq; + + p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle); + o->duty_cycle = p->duty_cycle; + + p->max_pulse_width = + (u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider); + } else { + p->max_pulse_width = + txclk_tx_s_max_pulse_width(dev, p->max_pulse_width, + &txclk_divider); + } + o->max_pulse_width = p->max_pulse_width; + atomic_set(&state->txclk_divider, txclk_divider); + + p->resolution = clock_divider_to_resolution(txclk_divider); + o->resolution = p->resolution; + + /* FIXME - make this dependent on resolution for better performance */ + control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY); + + control_tx_polarity_invert(dev, p->invert_carrier_sense); + o->invert_carrier_sense = p->invert_carrier_sense; + + control_tx_level_invert(dev, p->invert_level); + o->invert_level = p->invert_level; + + o->interrupt_enable = p->interrupt_enable; + o->enable = p->enable; + if (p->enable) { + if (p->interrupt_enable) + irqenable_tx(dev, IRQEN_TSE); + control_tx_enable(dev, p->enable); + } + + mutex_unlock(&state->tx_params_lock); + return 0; +} + + +/* + * V4L2 Subdevice Core Ops + */ +static int cx23888_ir_log_status(struct v4l2_subdev *sd) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + char *s; + int i, j; + + u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG); + u32 txclk = cx23888_ir_read4(dev, CX23888_IR_TXCLK_REG) & TXCLK_TCD; + u32 rxclk = cx23888_ir_read4(dev, CX23888_IR_RXCLK_REG) & RXCLK_RCD; + u32 cduty = cx23888_ir_read4(dev, CX23888_IR_CDUTY_REG) & CDUTY_CDC; + u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG); + u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG); + u32 filtr = cx23888_ir_read4(dev, CX23888_IR_FILTR_REG) & FILTR_LPF; + + v4l2_info(sd, "IR Receiver:\n"); + v4l2_info(sd, "\tEnabled: %s\n", + cntrl & CNTRL_RXE ? "yes" : "no"); + v4l2_info(sd, "\tDemodulation from a carrier: %s\n", + cntrl & CNTRL_DMD ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO: %s\n", + cntrl & CNTRL_RFE ? "enabled" : "disabled"); + switch (cntrl & CNTRL_EDG) { + case CNTRL_EDG_NONE: + s = "disabled"; + break; + case CNTRL_EDG_FALL: + s = "falling edge"; + break; + case CNTRL_EDG_RISE: + s = "rising edge"; + break; + case CNTRL_EDG_BOTH: + s = "rising & falling edges"; + break; + default: + s = "??? edge"; + break; + } + v4l2_info(sd, "\tPulse timers' start/stop trigger: %s\n", s); + v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n", + cntrl & CNTRL_R ? "not loaded" : "overflow marker"); + v4l2_info(sd, "\tFIFO interrupt watermark: %s\n", + cntrl & CNTRL_RIC ? "not empty" : "half full or greater"); + v4l2_info(sd, "\tLoopback mode: %s\n", + cntrl & CNTRL_LBM ? "loopback active" : "normal receive"); + if (cntrl & CNTRL_DMD) { + v4l2_info(sd, "\tExpected carrier (16 clocks): %u Hz\n", + clock_divider_to_carrier_freq(rxclk)); + switch (cntrl & CNTRL_WIN) { + case CNTRL_WIN_3_3: + i = 3; + j = 3; + break; + case CNTRL_WIN_4_3: + i = 4; + j = 3; + break; + case CNTRL_WIN_3_4: + i = 3; + j = 4; + break; + case CNTRL_WIN_4_4: + i = 4; + j = 4; + break; + default: + i = 0; + j = 0; + break; + } + v4l2_info(sd, "\tNext carrier edge window: 16 clocks " + "-%1d/+%1d, %u to %u Hz\n", i, j, + clock_divider_to_freq(rxclk, 16 + j), + clock_divider_to_freq(rxclk, 16 - i)); + } + v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n", + pulse_width_count_to_us(FIFO_RXTX, rxclk), + pulse_width_count_to_ns(FIFO_RXTX, rxclk)); + v4l2_info(sd, "\tLow pass filter: %s\n", + filtr ? "enabled" : "disabled"); + if (filtr) + v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, " + "%u ns\n", + lpf_count_to_us(filtr), + lpf_count_to_ns(filtr)); + v4l2_info(sd, "\tPulse width timer timed-out: %s\n", + stats & STATS_RTO ? "yes" : "no"); + v4l2_info(sd, "\tPulse width timer time-out intr: %s\n", + irqen & IRQEN_RTE ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO overrun: %s\n", + stats & STATS_ROR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO overrun interrupt: %s\n", + irqen & IRQEN_ROE ? "enabled" : "disabled"); + v4l2_info(sd, "\tBusy: %s\n", + stats & STATS_RBY ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service requested: %s\n", + stats & STATS_RSR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service request interrupt: %s\n", + irqen & IRQEN_RSE ? "enabled" : "disabled"); + + v4l2_info(sd, "IR Transmitter:\n"); + v4l2_info(sd, "\tEnabled: %s\n", + cntrl & CNTRL_TXE ? "yes" : "no"); + v4l2_info(sd, "\tModulation onto a carrier: %s\n", + cntrl & CNTRL_MOD ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO: %s\n", + cntrl & CNTRL_TFE ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO interrupt watermark: %s\n", + cntrl & CNTRL_TIC ? "not empty" : "half full or less"); + v4l2_info(sd, "\tOutput pin level inversion %s\n", + cntrl & CNTRL_IVO ? "yes" : "no"); + v4l2_info(sd, "\tCarrier polarity: %s\n", + cntrl & CNTRL_CPL ? "space:burst mark:noburst" + : "space:noburst mark:burst"); + if (cntrl & CNTRL_MOD) { + v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n", + clock_divider_to_carrier_freq(txclk)); + v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n", + cduty + 1); + } + v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n", + pulse_width_count_to_us(FIFO_RXTX, txclk), + pulse_width_count_to_ns(FIFO_RXTX, txclk)); + v4l2_info(sd, "\tBusy: %s\n", + stats & STATS_TBY ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service requested: %s\n", + stats & STATS_TSR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service request interrupt: %s\n", + irqen & IRQEN_TSE ? "enabled" : "disabled"); + + return 0; +} + +static inline int cx23888_ir_dbg_match(const struct v4l2_dbg_match *match) +{ + return match->type == V4L2_CHIP_MATCH_HOST && match->addr == 2; +} + +static int cx23888_ir_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct cx23888_ir_state *state = to_state(sd); + + if (cx23888_ir_dbg_match(&chip->match)) { + chip->ident = state->id; + chip->revision = state->rev; + } + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cx23888_ir_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct cx23888_ir_state *state = to_state(sd); + u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg; + + if (!cx23888_ir_dbg_match(®->match)) + return -EINVAL; + if ((addr & 0x3) != 0) + return -EINVAL; + if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 4; + reg->val = cx23888_ir_read4(state->dev, addr); + return 0; +} + +static int cx23888_ir_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct cx23888_ir_state *state = to_state(sd); + u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg; + + if (!cx23888_ir_dbg_match(®->match)) + return -EINVAL; + if ((addr & 0x3) != 0) + return -EINVAL; + if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cx23888_ir_write4(state->dev, addr, reg->val); + return 0; +} +#endif + +static const struct v4l2_subdev_core_ops cx23888_ir_core_ops = { + .g_chip_ident = cx23888_ir_g_chip_ident, + .log_status = cx23888_ir_log_status, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = cx23888_ir_g_register, + .s_register = cx23888_ir_s_register, +#endif + .interrupt_service_routine = cx23888_ir_irq_handler, +}; + +static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = { + .rx_read = cx23888_ir_rx_read, + .rx_g_parameters = cx23888_ir_rx_g_parameters, + .rx_s_parameters = cx23888_ir_rx_s_parameters, + + .tx_write = cx23888_ir_tx_write, + .tx_g_parameters = cx23888_ir_tx_g_parameters, + .tx_s_parameters = cx23888_ir_tx_s_parameters, +}; + +static const struct v4l2_subdev_ops cx23888_ir_controller_ops = { + .core = &cx23888_ir_core_ops, + .ir = &cx23888_ir_ir_ops, +}; + +static const struct v4l2_subdev_ir_parameters default_rx_params = { + .bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec), + .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, + + .enable = false, + .interrupt_enable = false, + .shutdown = true, + + .modulation = true, + .carrier_freq = 36000, /* 36 kHz - RC-5, RC-6, and RC-6A carrier */ + + /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */ + /* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */ + .noise_filter_min_width = 333333, /* ns */ + .carrier_range_lower = 35000, + .carrier_range_upper = 37000, + .invert_level = false, +}; + +static const struct v4l2_subdev_ir_parameters default_tx_params = { + .bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec), + .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, + + .enable = false, + .interrupt_enable = false, + .shutdown = true, + + .modulation = true, + .carrier_freq = 36000, /* 36 kHz - RC-5 carrier */ + .duty_cycle = 25, /* 25 % - RC-5 carrier */ + .invert_level = false, + .invert_carrier_sense = false, +}; + +int cx23888_ir_probe(struct cx23885_dev *dev) +{ + struct cx23888_ir_state *state; + struct v4l2_subdev *sd; + struct v4l2_subdev_ir_parameters default_params; + int ret; + + state = kzalloc(sizeof(struct cx23888_ir_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + spin_lock_init(&state->rx_kfifo_lock); + if (kfifo_alloc(&state->rx_kfifo, CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL)) + return -ENOMEM; + + state->dev = dev; + state->id = V4L2_IDENT_CX23888_IR; + state->rev = 0; + sd = &state->sd; + + v4l2_subdev_init(sd, &cx23888_ir_controller_ops); + v4l2_set_subdevdata(sd, state); + /* FIXME - fix the formatting of dev->v4l2_dev.name and use it */ + snprintf(sd->name, sizeof(sd->name), "%s/888-ir", dev->name); + sd->grp_id = CX23885_HW_888_IR; + + ret = v4l2_device_register_subdev(&dev->v4l2_dev, sd); + if (ret == 0) { + /* + * Ensure no interrupts arrive from '888 specific conditions, + * since we ignore them in this driver to have commonality with + * similar IR controller cores. + */ + cx23888_ir_write4(dev, CX23888_IR_IRQEN_REG, 0); + + mutex_init(&state->rx_params_lock); + default_params = default_rx_params; + v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params); + + mutex_init(&state->tx_params_lock); + default_params = default_tx_params; + v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params); + } else { + kfifo_free(&state->rx_kfifo); + } + return ret; +} + +int cx23888_ir_remove(struct cx23885_dev *dev) +{ + struct v4l2_subdev *sd; + struct cx23888_ir_state *state; + + sd = cx23885_find_hw(dev, CX23885_HW_888_IR); + if (sd == NULL) + return -ENODEV; + + cx23888_ir_rx_shutdown(sd); + cx23888_ir_tx_shutdown(sd); + + state = to_state(sd); + v4l2_device_unregister_subdev(sd); + kfifo_free(&state->rx_kfifo); + kfree(state); + /* Nothing more to free() as state held the actual v4l2_subdev object */ + return 0; +} diff --git a/drivers/media/pci/cx23885/cx23888-ir.h b/drivers/media/pci/cx23885/cx23888-ir.h new file mode 100644 index 00000000..d2de41ca --- /dev/null +++ b/drivers/media/pci/cx23885/cx23888-ir.h @@ -0,0 +1,28 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * CX23888 Integrated Consumer Infrared Controller + * + * Copyright (C) 2009 Andy Walls + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX23888_IR_H_ +#define _CX23888_IR_H_ +int cx23888_ir_probe(struct cx23885_dev *dev); +int cx23888_ir_remove(struct cx23885_dev *dev); +#endif diff --git a/drivers/media/pci/cx23885/netup-eeprom.c b/drivers/media/pci/cx23885/netup-eeprom.c new file mode 100644 index 00000000..98a48f50 --- /dev/null +++ b/drivers/media/pci/cx23885/netup-eeprom.c @@ -0,0 +1,107 @@ + +/* + * netup-eeprom.c + * + * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Abylay Ospan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +# +#include "cx23885.h" +#include "netup-eeprom.h" + +#define EEPROM_I2C_ADDR 0x50 + +int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr) +{ + int ret; + unsigned char buf[2]; + + /* Read from EEPROM */ + struct i2c_msg msg[] = { + { + .addr = EEPROM_I2C_ADDR, + .flags = 0, + .buf = &buf[0], + .len = 1 + }, { + .addr = EEPROM_I2C_ADDR, + .flags = I2C_M_RD, + .buf = &buf[1], + .len = 1 + } + + }; + + buf[0] = addr; + buf[1] = 0x0; + + ret = i2c_transfer(i2c_adap, msg, 2); + + if (ret != 2) { + printk(KERN_ERR "eeprom i2c read error, status=%d\n", ret); + return -1; + } + + return buf[1]; +}; + +int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data) +{ + int ret; + unsigned char bufw[2]; + + /* Write into EEPROM */ + struct i2c_msg msg[] = { + { + .addr = EEPROM_I2C_ADDR, + .flags = 0, + .buf = &bufw[0], + .len = 2 + } + }; + + bufw[0] = addr; + bufw[1] = data; + + ret = i2c_transfer(i2c_adap, msg, 1); + + if (ret != 1) { + printk(KERN_ERR "eeprom i2c write error, status=%d\n", ret); + return -1; + } + + mdelay(10); /* prophylactic delay, datasheet write cycle time = 5 ms */ + return 0; +}; + +void netup_get_card_info(struct i2c_adapter *i2c_adap, + struct netup_card_info *cinfo) +{ + int i, j; + + cinfo->rev = netup_eeprom_read(i2c_adap, 63); + + for (i = 64, j = 0; i < 70; i++, j++) + cinfo->port[0].mac[j] = netup_eeprom_read(i2c_adap, i); + + for (i = 70, j = 0; i < 76; i++, j++) + cinfo->port[1].mac[j] = netup_eeprom_read(i2c_adap, i); +}; diff --git a/drivers/media/pci/cx23885/netup-eeprom.h b/drivers/media/pci/cx23885/netup-eeprom.h new file mode 100644 index 00000000..13926e18 --- /dev/null +++ b/drivers/media/pci/cx23885/netup-eeprom.h @@ -0,0 +1,42 @@ +/* + * netup-eeprom.h + * + * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Abylay Ospan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef NETUP_EEPROM_H +#define NETUP_EEPROM_H + +struct netup_port_info { + u8 mac[6];/* card MAC address */ +}; + +struct netup_card_info { + struct netup_port_info port[2];/* ports - 1,2 */ + u8 rev;/* card revision */ +}; + +extern int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr); +extern int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data); +extern void netup_get_card_info(struct i2c_adapter *i2c_adap, + struct netup_card_info *cinfo); + +#endif diff --git a/drivers/media/pci/cx23885/netup-init.c b/drivers/media/pci/cx23885/netup-init.c new file mode 100644 index 00000000..0044fef7 --- /dev/null +++ b/drivers/media/pci/cx23885/netup-init.c @@ -0,0 +1,126 @@ +/* + * netup-init.c + * + * NetUP Dual DVB-S2 CI driver + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * Copyright (C) 2009 Abylay Ospan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" +#include "netup-init.h" + +static void i2c_av_write(struct i2c_adapter *i2c, u16 reg, u8 val) +{ + int ret; + u8 buf[3]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 3 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = val; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); +} + +static void i2c_av_write4(struct i2c_adapter *i2c, u16 reg, u32 val) +{ + int ret; + u8 buf[6]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 6 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = val & 0xff; + buf[3] = (val >> 8) & 0xff; + buf[4] = (val >> 16) & 0xff; + buf[5] = val >> 24; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); +} + +static u8 i2c_av_read(struct i2c_adapter *i2c, u16 reg) +{ + int ret; + u8 buf[2]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 2 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); + + msg.flags = I2C_M_RD; + msg.len = 1; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c read error!\n", __func__); + + return buf[0]; +} + +static void i2c_av_and_or(struct i2c_adapter *i2c, u16 reg, unsigned and_mask, + u8 or_value) +{ + i2c_av_write(i2c, reg, (i2c_av_read(i2c, reg) & and_mask) | or_value); +} +/* set 27MHz on AUX_CLK */ +void netup_initialize(struct cx23885_dev *dev) +{ + struct cx23885_i2c *i2c_bus = &dev->i2c_bus[2]; + struct i2c_adapter *i2c = &i2c_bus->i2c_adap; + + /* Stop microcontroller */ + i2c_av_and_or(i2c, 0x803, ~0x10, 0x00); + + /* Aux PLL frac for 27 MHz */ + i2c_av_write4(i2c, 0x114, 0xea0eb3); + + /* Aux PLL int for 27 MHz */ + i2c_av_write4(i2c, 0x110, 0x090319); + + /* start microcontroller */ + i2c_av_and_or(i2c, 0x803, ~0x10, 0x10); +} diff --git a/drivers/media/pci/cx23885/netup-init.h b/drivers/media/pci/cx23885/netup-init.h new file mode 100644 index 00000000..d26ae4b1 --- /dev/null +++ b/drivers/media/pci/cx23885/netup-init.h @@ -0,0 +1,25 @@ +/* + * netup-init.h + * + * NetUP Dual DVB-S2 CI driver + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * Copyright (C) 2009 Abylay Ospan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +extern void netup_initialize(struct cx23885_dev *dev); diff --git a/drivers/media/pci/cx25821/Kconfig b/drivers/media/pci/cx25821/Kconfig new file mode 100644 index 00000000..6439a847 --- /dev/null +++ b/drivers/media/pci/cx25821/Kconfig @@ -0,0 +1,29 @@ +config VIDEO_CX25821 + tristate "Conexant cx25821 support" + depends on VIDEO_DEV && PCI && I2C + select I2C_ALGOBIT + select VIDEO_BTCX + select VIDEOBUF_DMA_SG + ---help--- + This is a video4linux driver for Conexant 25821 based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called cx25821 + +config VIDEO_CX25821_ALSA + tristate "Conexant 25821 DMA audio support" + depends on VIDEO_CX25821 && SND + select SND_PCM + ---help--- + This is a video4linux driver for direct (DMA) audio on + Conexant 25821 based capture cards using ALSA. + + It only works with boards with function 01 enabled. + To check if your board supports, use lspci -n. + If supported, you should see 14f1:8801 or 14f1:8811 + PCI device. + + To compile this driver as a module, choose M here: the + module will be called cx25821-alsa. + diff --git a/drivers/media/pci/cx25821/Makefile b/drivers/media/pci/cx25821/Makefile new file mode 100644 index 00000000..fb76c3d3 --- /dev/null +++ b/drivers/media/pci/cx25821/Makefile @@ -0,0 +1,9 @@ +cx25821-y := cx25821-core.o cx25821-cards.o cx25821-i2c.o \ + cx25821-gpio.o cx25821-medusa-video.o \ + cx25821-video.o cx25821-video-upstream.o + +obj-$(CONFIG_VIDEO_CX25821) += cx25821.o +obj-$(CONFIG_VIDEO_CX25821_ALSA) += cx25821-alsa.o + +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/common diff --git a/drivers/media/pci/cx25821/cx25821-alsa.c b/drivers/media/pci/cx25821/cx25821-alsa.c new file mode 100644 index 00000000..6e91e84d --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-alsa.c @@ -0,0 +1,759 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * Based on SAA713x ALSA driver and CX88 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "cx25821.h" +#include "cx25821-reg.h" + +#define AUDIO_SRAM_CHANNEL SRAM_CH08 + +#define dprintk(level, fmt, arg...) \ +do { \ + if (debug >= level) \ + pr_info("%s/1: " fmt, chip->dev->name, ##arg); \ +} while (0) +#define dprintk_core(level, fmt, arg...) \ +do { \ + if (debug >= level) \ + printk(KERN_DEBUG "%s/1: " fmt, chip->dev->name, ##arg); \ +} while (0) + +/**************************************************************************** + Data type declarations - Can be moded to a header file later + ****************************************************************************/ + +static int devno; + +struct cx25821_audio_buffer { + unsigned int bpl; + struct btcx_riscmem risc; + struct videobuf_dmabuf dma; +}; + +struct cx25821_audio_dev { + struct cx25821_dev *dev; + struct cx25821_dmaqueue q; + + /* pci i/o */ + struct pci_dev *pci; + + /* audio controls */ + int irq; + + struct snd_card *card; + + unsigned long iobase; + spinlock_t reg_lock; + atomic_t count; + + unsigned int dma_size; + unsigned int period_size; + unsigned int num_periods; + + struct videobuf_dmabuf *dma_risc; + + struct cx25821_audio_buffer *buf; + + struct snd_pcm_substream *substream; +}; + + +/**************************************************************************** + Module global static vars + ****************************************************************************/ + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ +static bool enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 }; + +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable cx25821 soundcard. default enabled."); + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for cx25821 capture interface(s)."); + +/**************************************************************************** + Module macros + ****************************************************************************/ + +MODULE_DESCRIPTION("ALSA driver module for cx25821 based capture cards"); +MODULE_AUTHOR("Hiep Huynh"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("{{Conexant,25821}"); /* "{{Conexant,23881}," */ + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +/**************************************************************************** + Module specific funtions + ****************************************************************************/ +/* Constants taken from cx88-reg.h */ +#define AUD_INT_DN_RISCI1 (1 << 0) +#define AUD_INT_UP_RISCI1 (1 << 1) +#define AUD_INT_RDS_DN_RISCI1 (1 << 2) +#define AUD_INT_DN_RISCI2 (1 << 4) /* yes, 3 is skipped */ +#define AUD_INT_UP_RISCI2 (1 << 5) +#define AUD_INT_RDS_DN_RISCI2 (1 << 6) +#define AUD_INT_DN_SYNC (1 << 12) +#define AUD_INT_UP_SYNC (1 << 13) +#define AUD_INT_RDS_DN_SYNC (1 << 14) +#define AUD_INT_OPC_ERR (1 << 16) +#define AUD_INT_BER_IRQ (1 << 20) +#define AUD_INT_MCHG_IRQ (1 << 21) +#define GP_COUNT_CONTROL_RESET 0x3 + +#define PCI_MSK_AUD_EXT (1 << 4) +#define PCI_MSK_AUD_INT (1 << 3) +/* + * BOARD Specific: Sets audio DMA + */ + +static int _cx25821_start_audio_dma(struct cx25821_audio_dev *chip) +{ + struct cx25821_audio_buffer *buf = chip->buf; + struct cx25821_dev *dev = chip->dev; + const struct sram_channel *audio_ch = + &cx25821_sram_channels[AUDIO_SRAM_CHANNEL]; + u32 tmp = 0; + + /* enable output on the GPIO 0 for the MCLK ADC (Audio) */ + cx25821_set_gpiopin_direction(chip->dev, 0, 0); + + /* Make sure RISC/FIFO are off before changing FIFO/RISC settings */ + cx_clear(AUD_INT_DMA_CTL, + FLD_AUD_DST_A_RISC_EN | FLD_AUD_DST_A_FIFO_EN); + + /* setup fifo + format - out channel */ + cx25821_sram_channel_setup_audio(chip->dev, audio_ch, buf->bpl, + buf->risc.dma); + + /* sets bpl size */ + cx_write(AUD_A_LNGTH, buf->bpl); + + /* reset counter */ + /* GP_COUNT_CONTROL_RESET = 0x3 */ + cx_write(AUD_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET); + atomic_set(&chip->count, 0); + + /* Set the input mode to 16-bit */ + tmp = cx_read(AUD_A_CFG); + cx_write(AUD_A_CFG, tmp | FLD_AUD_DST_PK_MODE | FLD_AUD_DST_ENABLE | + FLD_AUD_CLK_ENABLE); + + /* + pr_info("DEBUG: Start audio DMA, %d B/line, cmds_start(0x%x)= %d lines/FIFO, %d periods, %d byte buffer\n", + buf->bpl, audio_ch->cmds_start, + cx_read(audio_ch->cmds_start + 12)>>1, + chip->num_periods, buf->bpl * chip->num_periods); + */ + + /* Enables corresponding bits at AUD_INT_STAT */ + cx_write(AUD_A_INT_MSK, FLD_AUD_DST_RISCI1 | FLD_AUD_DST_OF | + FLD_AUD_DST_SYNC | FLD_AUD_DST_OPC_ERR); + + /* Clean any pending interrupt bits already set */ + cx_write(AUD_A_INT_STAT, ~0); + + /* enable audio irqs */ + cx_set(PCI_INT_MSK, chip->dev->pci_irqmask | PCI_MSK_AUD_INT); + + /* Turn on audio downstream fifo and risc enable 0x101 */ + tmp = cx_read(AUD_INT_DMA_CTL); + cx_set(AUD_INT_DMA_CTL, tmp | + (FLD_AUD_DST_A_RISC_EN | FLD_AUD_DST_A_FIFO_EN)); + + mdelay(100); + return 0; +} + +/* + * BOARD Specific: Resets audio DMA + */ +static int _cx25821_stop_audio_dma(struct cx25821_audio_dev *chip) +{ + struct cx25821_dev *dev = chip->dev; + + /* stop dma */ + cx_clear(AUD_INT_DMA_CTL, + FLD_AUD_DST_A_RISC_EN | FLD_AUD_DST_A_FIFO_EN); + + /* disable irqs */ + cx_clear(PCI_INT_MSK, PCI_MSK_AUD_INT); + cx_clear(AUD_A_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1); + + return 0; +} + +#define MAX_IRQ_LOOP 50 + +/* + * BOARD Specific: IRQ dma bits + */ +static char *cx25821_aud_irqs[32] = { + "dn_risci1", "up_risci1", "rds_dn_risc1", /* 0-2 */ + NULL, /* reserved */ + "dn_risci2", "up_risci2", "rds_dn_risc2", /* 4-6 */ + NULL, /* reserved */ + "dnf_of", "upf_uf", "rds_dnf_uf", /* 8-10 */ + NULL, /* reserved */ + "dn_sync", "up_sync", "rds_dn_sync", /* 12-14 */ + NULL, /* reserved */ + "opc_err", "par_err", "rip_err", /* 16-18 */ + "pci_abort", "ber_irq", "mchg_irq" /* 19-21 */ +}; + +/* + * BOARD Specific: Threats IRQ audio specific calls + */ +static void cx25821_aud_irq(struct cx25821_audio_dev *chip, u32 status, + u32 mask) +{ + struct cx25821_dev *dev = chip->dev; + + if (0 == (status & mask)) + return; + + cx_write(AUD_A_INT_STAT, status); + if (debug > 1 || (status & mask & ~0xff)) + cx25821_print_irqbits(dev->name, "irq aud", cx25821_aud_irqs, + ARRAY_SIZE(cx25821_aud_irqs), status, mask); + + /* risc op code error */ + if (status & AUD_INT_OPC_ERR) { + pr_warn("WARNING %s/1: Audio risc op code error\n", dev->name); + + cx_clear(AUD_INT_DMA_CTL, + FLD_AUD_DST_A_RISC_EN | FLD_AUD_DST_A_FIFO_EN); + cx25821_sram_channel_dump_audio(dev, + &cx25821_sram_channels[AUDIO_SRAM_CHANNEL]); + } + if (status & AUD_INT_DN_SYNC) { + pr_warn("WARNING %s: Downstream sync error!\n", dev->name); + cx_write(AUD_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET); + return; + } + + /* risc1 downstream */ + if (status & AUD_INT_DN_RISCI1) { + atomic_set(&chip->count, cx_read(AUD_A_GPCNT)); + snd_pcm_period_elapsed(chip->substream); + } +} + +/* + * BOARD Specific: Handles IRQ calls + */ +static irqreturn_t cx25821_irq(int irq, void *dev_id) +{ + struct cx25821_audio_dev *chip = dev_id; + struct cx25821_dev *dev = chip->dev; + u32 status, pci_status; + u32 audint_status, audint_mask; + int loop, handled = 0; + + audint_status = cx_read(AUD_A_INT_STAT); + audint_mask = cx_read(AUD_A_INT_MSK); + status = cx_read(PCI_INT_STAT); + + for (loop = 0; loop < 1; loop++) { + status = cx_read(PCI_INT_STAT); + if (0 == status) { + status = cx_read(PCI_INT_STAT); + audint_status = cx_read(AUD_A_INT_STAT); + audint_mask = cx_read(AUD_A_INT_MSK); + + if (status) { + handled = 1; + cx_write(PCI_INT_STAT, status); + + cx25821_aud_irq(chip, audint_status, + audint_mask); + break; + } else { + goto out; + } + } + + handled = 1; + cx_write(PCI_INT_STAT, status); + + cx25821_aud_irq(chip, audint_status, audint_mask); + } + + pci_status = cx_read(PCI_INT_STAT); + + if (handled) + cx_write(PCI_INT_STAT, pci_status); + +out: + return IRQ_RETVAL(handled); +} + +static int dsp_buffer_free(struct cx25821_audio_dev *chip) +{ + BUG_ON(!chip->dma_size); + + dprintk(2, "Freeing buffer\n"); + videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc); + videobuf_dma_free(chip->dma_risc); + btcx_riscmem_free(chip->pci, &chip->buf->risc); + kfree(chip->buf); + + chip->dma_risc = NULL; + chip->dma_size = 0; + + return 0; +} + +/**************************************************************************** + ALSA PCM Interface + ****************************************************************************/ + +/* + * Digital hardware definition + */ +#define DEFAULT_FIFO_SIZE 384 +static struct snd_pcm_hardware snd_cx25821_digital_hw = { + .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + /* Analog audio output will be full of clicks and pops if there + are not exactly four lines in the SRAM FIFO buffer. */ + .period_bytes_min = DEFAULT_FIFO_SIZE / 3, + .period_bytes_max = DEFAULT_FIFO_SIZE / 3, + .periods_min = 1, + .periods_max = AUDIO_LINE_SIZE, + /* 128 * 128 = 16384 = 1024 * 16 */ + .buffer_bytes_max = (AUDIO_LINE_SIZE * AUDIO_LINE_SIZE), +}; + +/* + * audio pcm capture open callback + */ +static int snd_cx25821_pcm_open(struct snd_pcm_substream *substream) +{ + struct cx25821_audio_dev *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int err; + unsigned int bpl = 0; + + if (!chip) { + pr_err("DEBUG: cx25821 can't find device struct. Can't proceed with open\n"); + return -ENODEV; + } + + err = snd_pcm_hw_constraint_pow2(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + goto _error; + + chip->substream = substream; + + runtime->hw = snd_cx25821_digital_hw; + + if (cx25821_sram_channels[AUDIO_SRAM_CHANNEL].fifo_size != + DEFAULT_FIFO_SIZE) { + /* since there are 3 audio Clusters */ + bpl = cx25821_sram_channels[AUDIO_SRAM_CHANNEL].fifo_size / 3; + bpl &= ~7; /* must be multiple of 8 */ + + if (bpl > AUDIO_LINE_SIZE) + bpl = AUDIO_LINE_SIZE; + + runtime->hw.period_bytes_min = bpl; + runtime->hw.period_bytes_max = bpl; + } + + return 0; +_error: + dprintk(1, "Error opening PCM!\n"); + return err; +} + +/* + * audio close callback + */ +static int snd_cx25821_close(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * hw_params callback + */ +static int snd_cx25821_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct cx25821_audio_dev *chip = snd_pcm_substream_chip(substream); + struct videobuf_dmabuf *dma; + + struct cx25821_audio_buffer *buf; + int ret; + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + chip->period_size = params_period_bytes(hw_params); + chip->num_periods = params_periods(hw_params); + chip->dma_size = chip->period_size * params_periods(hw_params); + + BUG_ON(!chip->dma_size); + BUG_ON(chip->num_periods & (chip->num_periods - 1)); + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (NULL == buf) + return -ENOMEM; + + if (chip->period_size > AUDIO_LINE_SIZE) + chip->period_size = AUDIO_LINE_SIZE; + + buf->bpl = chip->period_size; + + dma = &buf->dma; + videobuf_dma_init(dma); + ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE, + (PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT)); + if (ret < 0) + goto error; + + ret = videobuf_dma_map(&chip->pci->dev, dma); + if (ret < 0) + goto error; + + ret = cx25821_risc_databuffer_audio(chip->pci, &buf->risc, dma->sglist, + chip->period_size, chip->num_periods, 1); + if (ret < 0) { + pr_info("DEBUG: ERROR after cx25821_risc_databuffer_audio()\n"); + goto error; + } + + /* Loop back to start of program */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + chip->buf = buf; + chip->dma_risc = dma; + + substream->runtime->dma_area = chip->dma_risc->vaddr; + substream->runtime->dma_bytes = chip->dma_size; + substream->runtime->dma_addr = 0; + + return 0; + +error: + kfree(buf); + return ret; +} + +/* + * hw free callback + */ +static int snd_cx25821_hw_free(struct snd_pcm_substream *substream) +{ + struct cx25821_audio_dev *chip = snd_pcm_substream_chip(substream); + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + return 0; +} + +/* + * prepare callback + */ +static int snd_cx25821_prepare(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * trigger callback + */ +static int snd_cx25821_card_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct cx25821_audio_dev *chip = snd_pcm_substream_chip(substream); + int err = 0; + + /* Local interrupts are already disabled by ALSA */ + spin_lock(&chip->reg_lock); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + err = _cx25821_start_audio_dma(chip); + break; + case SNDRV_PCM_TRIGGER_STOP: + err = _cx25821_stop_audio_dma(chip); + break; + default: + err = -EINVAL; + break; + } + + spin_unlock(&chip->reg_lock); + + return err; +} + +/* + * pointer callback + */ +static snd_pcm_uframes_t snd_cx25821_pointer(struct snd_pcm_substream + *substream) +{ + struct cx25821_audio_dev *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + u16 count; + + count = atomic_read(&chip->count); + + return runtime->period_size * (count & (runtime->periods - 1)); +} + +/* + * page callback (needed for mmap) + */ +static struct page *snd_cx25821_page(struct snd_pcm_substream *substream, + unsigned long offset) +{ + void *pageptr = substream->runtime->dma_area + offset; + + return vmalloc_to_page(pageptr); +} + +/* + * operators + */ +static struct snd_pcm_ops snd_cx25821_pcm_ops = { + .open = snd_cx25821_pcm_open, + .close = snd_cx25821_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_cx25821_hw_params, + .hw_free = snd_cx25821_hw_free, + .prepare = snd_cx25821_prepare, + .trigger = snd_cx25821_card_trigger, + .pointer = snd_cx25821_pointer, + .page = snd_cx25821_page, +}; + +/* + * ALSA create a PCM device: Called when initializing the board. + * Sets up the name and hooks up the callbacks + */ +static int snd_cx25821_pcm(struct cx25821_audio_dev *chip, int device, + char *name) +{ + struct snd_pcm *pcm; + int err; + + err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm); + if (err < 0) { + pr_info("ERROR: FAILED snd_pcm_new() in %s\n", __func__); + return err; + } + pcm->private_data = chip; + pcm->info_flags = 0; + strcpy(pcm->name, name); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx25821_pcm_ops); + + return 0; +} + +/**************************************************************************** + Basic Flow for Sound Devices + ****************************************************************************/ + +/* + * PCI ID Table - 14f1:8801 and 14f1:8811 means function 1: Audio + * Only boards with eeprom and byte 1 at eeprom=1 have it + */ + +static DEFINE_PCI_DEVICE_TABLE(cx25821_audio_pci_tbl) = { + {0x14f1, 0x0920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, cx25821_audio_pci_tbl); + +/* + * Alsa Constructor - Component probe + */ +static int cx25821_audio_initdev(struct cx25821_dev *dev) +{ + struct snd_card *card; + struct cx25821_audio_dev *chip; + int err; + + if (devno >= SNDRV_CARDS) { + pr_info("DEBUG ERROR: devno >= SNDRV_CARDS %s\n", __func__); + return -ENODEV; + } + + if (!enable[devno]) { + ++devno; + pr_info("DEBUG ERROR: !enable[devno] %s\n", __func__); + return -ENOENT; + } + + err = snd_card_create(index[devno], id[devno], THIS_MODULE, + sizeof(struct cx25821_audio_dev), &card); + if (err < 0) { + pr_info("DEBUG ERROR: cannot create snd_card_new in %s\n", + __func__); + return err; + } + + strcpy(card->driver, "cx25821"); + + /* Card "creation" */ + chip = card->private_data; + spin_lock_init(&chip->reg_lock); + + chip->dev = dev; + chip->card = card; + chip->pci = dev->pci; + chip->iobase = pci_resource_start(dev->pci, 0); + + chip->irq = dev->pci->irq; + + err = request_irq(dev->pci->irq, cx25821_irq, + IRQF_SHARED, chip->dev->name, chip); + + if (err < 0) { + pr_err("ERROR %s: can't get IRQ %d for ALSA\n", chip->dev->name, + dev->pci->irq); + goto error; + } + + err = snd_cx25821_pcm(chip, 0, "cx25821 Digital"); + if (err < 0) { + pr_info("DEBUG ERROR: cannot create snd_cx25821_pcm %s\n", + __func__); + goto error; + } + + snd_card_set_dev(card, &chip->pci->dev); + + strcpy(card->shortname, "cx25821"); + sprintf(card->longname, "%s at 0x%lx irq %d", chip->dev->name, + chip->iobase, chip->irq); + strcpy(card->mixername, "CX25821"); + + pr_info("%s/%i: ALSA support for cx25821 boards\n", card->driver, + devno); + + err = snd_card_register(card); + if (err < 0) { + pr_info("DEBUG ERROR: cannot register sound card %s\n", + __func__); + goto error; + } + + dev->card = card; + devno++; + return 0; + +error: + snd_card_free(card); + return err; +} + +/**************************************************************************** + LINUX MODULE INIT + ****************************************************************************/ + +static int cx25821_alsa_exit_callback(struct device *dev, void *data) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + struct cx25821_dev *cxdev = get_cx25821(v4l2_dev); + + snd_card_free(cxdev->card); + return 0; +} + +static void cx25821_audio_fini(void) +{ + struct device_driver *drv = driver_find("cx25821", &pci_bus_type); + int ret; + + ret = driver_for_each_device(drv, NULL, NULL, cx25821_alsa_exit_callback); + if (ret) + pr_err("%s failed to find a cx25821 driver.\n", __func__); +} + +static int cx25821_alsa_init_callback(struct device *dev, void *data) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + struct cx25821_dev *cxdev = get_cx25821(v4l2_dev); + + cx25821_audio_initdev(cxdev); + return 0; +} + +/* + * Module initializer + * + * Loops through present saa7134 cards, and assigns an ALSA device + * to each one + * + */ +static int cx25821_alsa_init(void) +{ + struct device_driver *drv = driver_find("cx25821", &pci_bus_type); + + return driver_for_each_device(drv, NULL, NULL, cx25821_alsa_init_callback); + +} + +late_initcall(cx25821_alsa_init); +module_exit(cx25821_audio_fini); diff --git a/drivers/media/pci/cx25821/cx25821-audio-upstream.c b/drivers/media/pci/cx25821/cx25821-audio-upstream.c new file mode 100644 index 00000000..68dbc2db --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-audio-upstream.c @@ -0,0 +1,696 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "cx25821-video.h" +#include "cx25821-audio-upstream.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards"); +MODULE_AUTHOR("Hiep Huynh "); +MODULE_LICENSE("GPL"); + +static int _intr_msk = FLD_AUD_SRC_RISCI1 | FLD_AUD_SRC_OF | + FLD_AUD_SRC_SYNC | FLD_AUD_SRC_OPC_ERR; + +static int cx25821_sram_channel_setup_upstream_audio(struct cx25821_dev *dev, + const struct sram_channel *ch, + unsigned int bpl, u32 risc) +{ + unsigned int i, lines; + u32 cdt; + + if (ch->cmds_start == 0) { + cx_write(ch->ptr1_reg, 0); + cx_write(ch->ptr2_reg, 0); + cx_write(ch->cnt2_reg, 0); + cx_write(ch->cnt1_reg, 0); + return 0; + } + + bpl = (bpl + 7) & ~7; /* alignment */ + cdt = ch->cdt; + lines = ch->fifo_size / bpl; + + if (lines > 3) + lines = 3; + + BUG_ON(lines < 2); + + /* write CDT */ + for (i = 0; i < lines; i++) { + cx_write(cdt + 16 * i, ch->fifo_start + bpl * i); + cx_write(cdt + 16 * i + 4, 0); + cx_write(cdt + 16 * i + 8, 0); + cx_write(cdt + 16 * i + 12, 0); + } + + /* write CMDS */ + cx_write(ch->cmds_start + 0, risc); + + cx_write(ch->cmds_start + 4, 0); + cx_write(ch->cmds_start + 8, cdt); + cx_write(ch->cmds_start + 12, AUDIO_CDT_SIZE_QW); + cx_write(ch->cmds_start + 16, ch->ctrl_start); + + /* IQ size */ + cx_write(ch->cmds_start + 20, AUDIO_IQ_SIZE_DW); + + for (i = 24; i < 80; i += 4) + cx_write(ch->cmds_start + i, 0); + + /* fill registers */ + cx_write(ch->ptr1_reg, ch->fifo_start); + cx_write(ch->ptr2_reg, cdt); + cx_write(ch->cnt2_reg, AUDIO_CDT_SIZE_QW); + cx_write(ch->cnt1_reg, AUDIO_CLUSTER_SIZE_QW - 1); + + return 0; +} + +static __le32 *cx25821_risc_field_upstream_audio(struct cx25821_dev *dev, + __le32 *rp, + dma_addr_t databuf_phys_addr, + unsigned int bpl, + int fifo_enable) +{ + unsigned int line; + const struct sram_channel *sram_ch = + dev->channels[dev->_audio_upstream_channel].sram_channels; + int offset = 0; + + /* scan lines */ + for (line = 0; line < LINES_PER_AUDIO_BUFFER; line++) { + *(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl); + *(rp++) = cpu_to_le32(databuf_phys_addr + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + + /* Check if we need to enable the FIFO + * after the first 3 lines. + * For the upstream audio channel, + * the risc engine will enable the FIFO */ + if (fifo_enable && line == 2) { + *(rp++) = RISC_WRITECR; + *(rp++) = sram_ch->dma_ctl; + *(rp++) = sram_ch->fld_aud_fifo_en; + *(rp++) = 0x00000020; + } + + offset += AUDIO_LINE_SIZE; + } + + return rp; +} + +static int cx25821_risc_buffer_upstream_audio(struct cx25821_dev *dev, + struct pci_dev *pci, + unsigned int bpl, unsigned int lines) +{ + __le32 *rp; + int fifo_enable = 0; + int frame = 0, i = 0; + int frame_size = AUDIO_DATA_BUF_SZ; + int databuf_offset = 0; + int risc_flag = RISC_CNT_INC; + dma_addr_t risc_phys_jump_addr; + + /* Virtual address of Risc buffer program */ + rp = dev->_risc_virt_addr; + + /* sync instruction */ + *(rp++) = cpu_to_le32(RISC_RESYNC | AUDIO_SYNC_LINE); + + for (frame = 0; frame < NUM_AUDIO_FRAMES; frame++) { + databuf_offset = frame_size * frame; + + if (frame == 0) { + fifo_enable = 1; + risc_flag = RISC_CNT_RESET; + } else { + fifo_enable = 0; + risc_flag = RISC_CNT_INC; + } + + /* Calculate physical jump address */ + if ((frame + 1) == NUM_AUDIO_FRAMES) { + risc_phys_jump_addr = + dev->_risc_phys_start_addr + + RISC_SYNC_INSTRUCTION_SIZE; + } else { + risc_phys_jump_addr = + dev->_risc_phys_start_addr + + RISC_SYNC_INSTRUCTION_SIZE + + AUDIO_RISC_DMA_BUF_SIZE * (frame + 1); + } + + rp = cx25821_risc_field_upstream_audio(dev, rp, + dev->_audiodata_buf_phys_addr + databuf_offset, + bpl, fifo_enable); + + if (USE_RISC_NOOP_AUDIO) { + for (i = 0; i < NUM_NO_OPS; i++) + *(rp++) = cpu_to_le32(RISC_NOOP); + } + + /* Loop to (Nth)FrameRISC or to Start of Risc program & + * generate IRQ */ + *(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | risc_flag); + *(rp++) = cpu_to_le32(risc_phys_jump_addr); + *(rp++) = cpu_to_le32(0); + + /* Recalculate virtual address based on frame index */ + rp = dev->_risc_virt_addr + RISC_SYNC_INSTRUCTION_SIZE / 4 + + (AUDIO_RISC_DMA_BUF_SIZE * (frame + 1) / 4); + } + + return 0; +} + +static void cx25821_free_memory_audio(struct cx25821_dev *dev) +{ + if (dev->_risc_virt_addr) { + pci_free_consistent(dev->pci, dev->_audiorisc_size, + dev->_risc_virt_addr, dev->_risc_phys_addr); + dev->_risc_virt_addr = NULL; + } + + if (dev->_audiodata_buf_virt_addr) { + pci_free_consistent(dev->pci, dev->_audiodata_buf_size, + dev->_audiodata_buf_virt_addr, + dev->_audiodata_buf_phys_addr); + dev->_audiodata_buf_virt_addr = NULL; + } +} + +void cx25821_stop_upstream_audio(struct cx25821_dev *dev) +{ + const struct sram_channel *sram_ch = + dev->channels[AUDIO_UPSTREAM_SRAM_CHANNEL_B].sram_channels; + u32 tmp = 0; + + if (!dev->_audio_is_running) { + printk(KERN_DEBUG + pr_fmt("No audio file is currently running so return!\n")); + return; + } + /* Disable RISC interrupts */ + cx_write(sram_ch->int_msk, 0); + + /* Turn OFF risc and fifo enable in AUD_DMA_CNTRL */ + tmp = cx_read(sram_ch->dma_ctl); + cx_write(sram_ch->dma_ctl, + tmp & ~(sram_ch->fld_aud_fifo_en | sram_ch->fld_aud_risc_en)); + + /* Clear data buffer memory */ + if (dev->_audiodata_buf_virt_addr) + memset(dev->_audiodata_buf_virt_addr, 0, + dev->_audiodata_buf_size); + + dev->_audio_is_running = 0; + dev->_is_first_audio_frame = 0; + dev->_audioframe_count = 0; + dev->_audiofile_status = END_OF_FILE; + + kfree(dev->_irq_audio_queues); + dev->_irq_audio_queues = NULL; + + kfree(dev->_audiofilename); +} + +void cx25821_free_mem_upstream_audio(struct cx25821_dev *dev) +{ + if (dev->_audio_is_running) + cx25821_stop_upstream_audio(dev); + + cx25821_free_memory_audio(dev); +} + +static int cx25821_get_audio_data(struct cx25821_dev *dev, + const struct sram_channel *sram_ch) +{ + struct file *file; + int frame_index_temp = dev->_audioframe_index; + int i = 0; + int frame_size = AUDIO_DATA_BUF_SZ; + int frame_offset = frame_size * frame_index_temp; + char mybuf[AUDIO_LINE_SIZE]; + loff_t file_offset = dev->_audioframe_count * frame_size; + char *p = NULL; + + if (dev->_audiofile_status == END_OF_FILE) + return 0; + + file = filp_open(dev->_audiofilename, O_RDONLY | O_LARGEFILE, 0); + if (IS_ERR(file)) { + pr_err("%s(): ERROR opening file(%s) with errno = %ld!\n", + __func__, dev->_audiofilename, -PTR_ERR(file)); + return PTR_ERR(file); + } + + if (dev->_audiodata_buf_virt_addr) + p = (char *)dev->_audiodata_buf_virt_addr + frame_offset; + + for (i = 0; i < dev->_audio_lines_count; i++) { + int n = kernel_read(file, file_offset, mybuf, AUDIO_LINE_SIZE); + if (n < AUDIO_LINE_SIZE) { + pr_info("Done: exit %s() since no more bytes to read from Audio file\n", + __func__); + dev->_audiofile_status = END_OF_FILE; + fput(file); + return 0; + } + dev->_audiofile_status = IN_PROGRESS; + if (p) { + memcpy(p, mybuf, n); + p += n; + } + file_offset += n; + } + dev->_audioframe_count++; + fput(file); + + return 0; +} + +static void cx25821_audioups_handler(struct work_struct *work) +{ + struct cx25821_dev *dev = container_of(work, struct cx25821_dev, + _audio_work_entry); + + if (!dev) { + pr_err("ERROR %s(): since container_of(work_struct) FAILED!\n", + __func__); + return; + } + + cx25821_get_audio_data(dev, dev->channels[dev->_audio_upstream_channel]. + sram_channels); +} + +static int cx25821_openfile_audio(struct cx25821_dev *dev, + const struct sram_channel *sram_ch) +{ + char *p = (void *)dev->_audiodata_buf_virt_addr; + struct file *file; + loff_t offset; + int i, j; + + file = filp_open(dev->_audiofilename, O_RDONLY | O_LARGEFILE, 0); + if (IS_ERR(file)) { + pr_err("%s(): ERROR opening file(%s) with errno = %ld!\n", + __func__, dev->_audiofilename, PTR_ERR(file)); + return PTR_ERR(file); + } + + for (j = 0, offset = 0; j < NUM_AUDIO_FRAMES; j++) { + for (i = 0; i < dev->_audio_lines_count; i++) { + char buf[AUDIO_LINE_SIZE]; + int n = kernel_read(file, offset, buf, + AUDIO_LINE_SIZE); + + if (n < AUDIO_LINE_SIZE) { + pr_info("Done: exit %s() since no more bytes to read from Audio file\n", + __func__); + dev->_audiofile_status = END_OF_FILE; + fput(file); + return 0; + } + + if (p) + memcpy(p + offset, buf, n); + + offset += n; + } + dev->_audioframe_count++; + } + dev->_audiofile_status = IN_PROGRESS; + fput(file); + return 0; +} + +static int cx25821_audio_upstream_buffer_prepare(struct cx25821_dev *dev, + const struct sram_channel *sram_ch, + int bpl) +{ + int ret = 0; + dma_addr_t dma_addr; + dma_addr_t data_dma_addr; + + cx25821_free_memory_audio(dev); + + dev->_risc_virt_addr = pci_alloc_consistent(dev->pci, + dev->audio_upstream_riscbuf_size, &dma_addr); + dev->_risc_virt_start_addr = dev->_risc_virt_addr; + dev->_risc_phys_start_addr = dma_addr; + dev->_risc_phys_addr = dma_addr; + dev->_audiorisc_size = dev->audio_upstream_riscbuf_size; + + if (!dev->_risc_virt_addr) { + printk(KERN_DEBUG + pr_fmt("ERROR: pci_alloc_consistent() FAILED to allocate memory for RISC program! Returning\n")); + return -ENOMEM; + } + /* Clear out memory at address */ + memset(dev->_risc_virt_addr, 0, dev->_audiorisc_size); + + /* For Audio Data buffer allocation */ + dev->_audiodata_buf_virt_addr = pci_alloc_consistent(dev->pci, + dev->audio_upstream_databuf_size, &data_dma_addr); + dev->_audiodata_buf_phys_addr = data_dma_addr; + dev->_audiodata_buf_size = dev->audio_upstream_databuf_size; + + if (!dev->_audiodata_buf_virt_addr) { + printk(KERN_DEBUG + pr_fmt("ERROR: pci_alloc_consistent() FAILED to allocate memory for data buffer! Returning\n")); + return -ENOMEM; + } + /* Clear out memory at address */ + memset(dev->_audiodata_buf_virt_addr, 0, dev->_audiodata_buf_size); + + ret = cx25821_openfile_audio(dev, sram_ch); + if (ret < 0) + return ret; + + /* Creating RISC programs */ + ret = cx25821_risc_buffer_upstream_audio(dev, dev->pci, bpl, + dev->_audio_lines_count); + if (ret < 0) { + printk(KERN_DEBUG + pr_fmt("ERROR creating audio upstream RISC programs!\n")); + goto error; + } + + return 0; + +error: + return ret; +} + +static int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num, + u32 status) +{ + int i = 0; + u32 int_msk_tmp; + const struct sram_channel *channel = dev->channels[chan_num].sram_channels; + dma_addr_t risc_phys_jump_addr; + __le32 *rp; + + if (status & FLD_AUD_SRC_RISCI1) { + /* Get interrupt_index of the program that interrupted */ + u32 prog_cnt = cx_read(channel->gpcnt); + + /* Since we've identified our IRQ, clear our bits from the + * interrupt mask and interrupt status registers */ + cx_write(channel->int_msk, 0); + cx_write(channel->int_stat, cx_read(channel->int_stat)); + + spin_lock(&dev->slock); + + while (prog_cnt != dev->_last_index_irq) { + /* Update _last_index_irq */ + if (dev->_last_index_irq < (NUMBER_OF_PROGRAMS - 1)) + dev->_last_index_irq++; + else + dev->_last_index_irq = 0; + + dev->_audioframe_index = dev->_last_index_irq; + + queue_work(dev->_irq_audio_queues, + &dev->_audio_work_entry); + } + + if (dev->_is_first_audio_frame) { + dev->_is_first_audio_frame = 0; + + if (dev->_risc_virt_start_addr != NULL) { + risc_phys_jump_addr = + dev->_risc_phys_start_addr + + RISC_SYNC_INSTRUCTION_SIZE + + AUDIO_RISC_DMA_BUF_SIZE; + + rp = cx25821_risc_field_upstream_audio(dev, + dev->_risc_virt_start_addr + 1, + dev->_audiodata_buf_phys_addr, + AUDIO_LINE_SIZE, FIFO_DISABLE); + + if (USE_RISC_NOOP_AUDIO) { + for (i = 0; i < NUM_NO_OPS; i++) { + *(rp++) = + cpu_to_le32(RISC_NOOP); + } + } + /* Jump to 2nd Audio Frame */ + *(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | + RISC_CNT_RESET); + *(rp++) = cpu_to_le32(risc_phys_jump_addr); + *(rp++) = cpu_to_le32(0); + } + } + + spin_unlock(&dev->slock); + } else { + if (status & FLD_AUD_SRC_OF) + pr_warn("%s(): Audio Received Overflow Error Interrupt!\n", + __func__); + + if (status & FLD_AUD_SRC_SYNC) + pr_warn("%s(): Audio Received Sync Error Interrupt!\n", + __func__); + + if (status & FLD_AUD_SRC_OPC_ERR) + pr_warn("%s(): Audio Received OpCode Error Interrupt!\n", + __func__); + + /* Read and write back the interrupt status register to clear + * our bits */ + cx_write(channel->int_stat, cx_read(channel->int_stat)); + } + + if (dev->_audiofile_status == END_OF_FILE) { + pr_warn("EOF Channel Audio Framecount = %d\n", + dev->_audioframe_count); + return -1; + } + /* ElSE, set the interrupt mask register, re-enable irq. */ + int_msk_tmp = cx_read(channel->int_msk); + cx_write(channel->int_msk, int_msk_tmp |= _intr_msk); + + return 0; +} + +static irqreturn_t cx25821_upstream_irq_audio(int irq, void *dev_id) +{ + struct cx25821_dev *dev = dev_id; + u32 audio_status; + int handled = 0; + const struct sram_channel *sram_ch; + + if (!dev) + return -1; + + sram_ch = dev->channels[dev->_audio_upstream_channel].sram_channels; + + audio_status = cx_read(sram_ch->int_stat); + + /* Only deal with our interrupt */ + if (audio_status) { + handled = cx25821_audio_upstream_irq(dev, + dev->_audio_upstream_channel, audio_status); + } + + if (handled < 0) + cx25821_stop_upstream_audio(dev); + else + handled += handled; + + return IRQ_RETVAL(handled); +} + +static void cx25821_wait_fifo_enable(struct cx25821_dev *dev, + const struct sram_channel *sram_ch) +{ + int count = 0; + u32 tmp; + + do { + /* Wait 10 microsecond before checking to see if the FIFO is + * turned ON. */ + udelay(10); + + tmp = cx_read(sram_ch->dma_ctl); + + /* 10 millisecond timeout */ + if (count++ > 1000) { + pr_err("ERROR: %s() fifo is NOT turned on. Timeout!\n", + __func__); + return; + } + + } while (!(tmp & sram_ch->fld_aud_fifo_en)); + +} + +static int cx25821_start_audio_dma_upstream(struct cx25821_dev *dev, + const struct sram_channel *sram_ch) +{ + u32 tmp = 0; + int err = 0; + + /* Set the physical start address of the RISC program in the initial + * program counter(IPC) member of the CMDS. */ + cx_write(sram_ch->cmds_start + 0, dev->_risc_phys_addr); + /* Risc IPC High 64 bits 63-32 */ + cx_write(sram_ch->cmds_start + 4, 0); + + /* reset counter */ + cx_write(sram_ch->gpcnt_ctl, 3); + + /* Set the line length (It looks like we do not need to set the + * line length) */ + cx_write(sram_ch->aud_length, AUDIO_LINE_SIZE & FLD_AUD_DST_LN_LNGTH); + + /* Set the input mode to 16-bit */ + tmp = cx_read(sram_ch->aud_cfg); + tmp |= FLD_AUD_SRC_ENABLE | FLD_AUD_DST_PK_MODE | FLD_AUD_CLK_ENABLE | + FLD_AUD_MASTER_MODE | FLD_AUD_CLK_SELECT_PLL_D | + FLD_AUD_SONY_MODE; + cx_write(sram_ch->aud_cfg, tmp); + + /* Read and write back the interrupt status register to clear it */ + tmp = cx_read(sram_ch->int_stat); + cx_write(sram_ch->int_stat, tmp); + + /* Clear our bits from the interrupt status register. */ + cx_write(sram_ch->int_stat, _intr_msk); + + /* Set the interrupt mask register, enable irq. */ + cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit)); + tmp = cx_read(sram_ch->int_msk); + cx_write(sram_ch->int_msk, tmp |= _intr_msk); + + err = request_irq(dev->pci->irq, cx25821_upstream_irq_audio, + IRQF_SHARED, dev->name, dev); + if (err < 0) { + pr_err("%s: can't get upstream IRQ %d\n", dev->name, + dev->pci->irq); + goto fail_irq; + } + + /* Start the DMA engine */ + tmp = cx_read(sram_ch->dma_ctl); + cx_set(sram_ch->dma_ctl, tmp | sram_ch->fld_aud_risc_en); + + dev->_audio_is_running = 1; + dev->_is_first_audio_frame = 1; + + /* The fifo_en bit turns on by the first Risc program */ + cx25821_wait_fifo_enable(dev, sram_ch); + + return 0; + +fail_irq: + cx25821_dev_unregister(dev); + return err; +} + +int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select) +{ + const struct sram_channel *sram_ch; + int err = 0; + + if (dev->_audio_is_running) { + pr_warn("Audio Channel is still running so return!\n"); + return 0; + } + + dev->_audio_upstream_channel = channel_select; + sram_ch = dev->channels[channel_select].sram_channels; + + /* Work queue */ + INIT_WORK(&dev->_audio_work_entry, cx25821_audioups_handler); + dev->_irq_audio_queues = + create_singlethread_workqueue("cx25821_audioworkqueue"); + + if (!dev->_irq_audio_queues) { + printk(KERN_DEBUG + pr_fmt("ERROR: create_singlethread_workqueue() for Audio FAILED!\n")); + return -ENOMEM; + } + + dev->_last_index_irq = 0; + dev->_audio_is_running = 0; + dev->_audioframe_count = 0; + dev->_audiofile_status = RESET_STATUS; + dev->_audio_lines_count = LINES_PER_AUDIO_BUFFER; + _line_size = AUDIO_LINE_SIZE; + + if ((dev->input_audiofilename) && + (strcmp(dev->input_audiofilename, "") != 0)) + dev->_audiofilename = kstrdup(dev->input_audiofilename, + GFP_KERNEL); + else + dev->_audiofilename = kstrdup(_defaultAudioName, + GFP_KERNEL); + + if (!dev->_audiofilename) { + err = -ENOMEM; + goto error; + } + + cx25821_sram_channel_setup_upstream_audio(dev, sram_ch, + _line_size, 0); + + dev->audio_upstream_riscbuf_size = + AUDIO_RISC_DMA_BUF_SIZE * NUM_AUDIO_PROGS + + RISC_SYNC_INSTRUCTION_SIZE; + dev->audio_upstream_databuf_size = AUDIO_DATA_BUF_SZ * NUM_AUDIO_PROGS; + + /* Allocating buffers and prepare RISC program */ + err = cx25821_audio_upstream_buffer_prepare(dev, sram_ch, + _line_size); + if (err < 0) { + pr_err("%s: Failed to set up Audio upstream buffers!\n", + dev->name); + goto error; + } + /* Start RISC engine */ + cx25821_start_audio_dma_upstream(dev, sram_ch); + + return 0; + +error: + cx25821_dev_unregister(dev); + + return err; +} diff --git a/drivers/media/pci/cx25821/cx25821-audio-upstream.h b/drivers/media/pci/cx25821/cx25821-audio-upstream.h new file mode 100644 index 00000000..af2ae7c5 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-audio-upstream.h @@ -0,0 +1,62 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#define NUM_AUDIO_PROGS 8 +#define NUM_AUDIO_FRAMES 8 +#define END_OF_FILE 0 +#define IN_PROGRESS 1 +#define RESET_STATUS -1 +#define FIFO_DISABLE 0 +#define FIFO_ENABLE 1 +#define NUM_NO_OPS 4 + +#define RISC_READ_INSTRUCTION_SIZE 12 +#define RISC_JUMP_INSTRUCTION_SIZE 12 +#define RISC_WRITECR_INSTRUCTION_SIZE 16 +#define RISC_SYNC_INSTRUCTION_SIZE 4 +#define DWORD_SIZE 4 +#define AUDIO_SYNC_LINE 4 + +#define LINES_PER_AUDIO_BUFFER 15 +#define AUDIO_LINE_SIZE 128 +#define AUDIO_DATA_BUF_SZ (AUDIO_LINE_SIZE * LINES_PER_AUDIO_BUFFER) + +#define USE_RISC_NOOP_AUDIO 1 + +#ifdef USE_RISC_NOOP_AUDIO +#define AUDIO_RISC_DMA_BUF_SIZE \ + (LINES_PER_AUDIO_BUFFER * RISC_READ_INSTRUCTION_SIZE + \ + RISC_WRITECR_INSTRUCTION_SIZE + NUM_NO_OPS * DWORD_SIZE + \ + RISC_JUMP_INSTRUCTION_SIZE) +#endif + +#ifndef USE_RISC_NOOP_AUDIO +#define AUDIO_RISC_DMA_BUF_SIZE \ + (LINES_PER_AUDIO_BUFFER * RISC_READ_INSTRUCTION_SIZE + \ + RISC_WRITECR_INSTRUCTION_SIZE + RISC_JUMP_INSTRUCTION_SIZE) +#endif + +static int _line_size; +char *_defaultAudioName = "/root/audioGOOD.wav"; diff --git a/drivers/media/pci/cx25821/cx25821-audio.h b/drivers/media/pci/cx25821/cx25821-audio.h new file mode 100644 index 00000000..1fc2d24f --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-audio.h @@ -0,0 +1,62 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CX25821_AUDIO_H__ +#define __CX25821_AUDIO_H__ + +#define USE_RISC_NOOP 1 +#define LINES_PER_BUFFER 15 +#define AUDIO_LINE_SIZE 128 + +/* Number of buffer programs to use at once. */ +#define NUMBER_OF_PROGRAMS 8 + +/* + * Max size of the RISC program for a buffer. - worst case is 2 writes per line + * Space is also added for the 4 no-op instructions added on the end. + */ +#ifndef USE_RISC_NOOP +#define MAX_BUFFER_PROGRAM_SIZE \ + (2 * LINES_PER_BUFFER * RISC_WRITE_INSTRUCTION_SIZE + \ + RISC_WRITECR_INSTRUCTION_SIZE * 4) +#endif + +/* MAE 12 July 2005 Try to use NOOP RISC instruction instead */ +#ifdef USE_RISC_NOOP +#define MAX_BUFFER_PROGRAM_SIZE \ + (2 * LINES_PER_BUFFER * RISC_WRITE_INSTRUCTION_SIZE + \ + RISC_NOOP_INSTRUCTION_SIZE * 4) +#endif + +/* Sizes of various instructions in bytes. Used when adding instructions. */ +#define RISC_WRITE_INSTRUCTION_SIZE 12 +#define RISC_JUMP_INSTRUCTION_SIZE 12 +#define RISC_SKIP_INSTRUCTION_SIZE 4 +#define RISC_SYNC_INSTRUCTION_SIZE 4 +#define RISC_WRITECR_INSTRUCTION_SIZE 16 +#define RISC_NOOP_INSTRUCTION_SIZE 4 + +#define MAX_AUDIO_DMA_BUFFER_SIZE \ + (MAX_BUFFER_PROGRAM_SIZE * NUMBER_OF_PROGRAMS + \ + RISC_SYNC_INSTRUCTION_SIZE) + +#endif diff --git a/drivers/media/pci/cx25821/cx25821-biffuncs.h b/drivers/media/pci/cx25821/cx25821-biffuncs.h new file mode 100644 index 00000000..937f5a70 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-biffuncs.h @@ -0,0 +1,45 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BITFUNCS_H +#define _BITFUNCS_H + +#define SetBit(Bit) (1 << Bit) + +static inline u8 getBit(u32 sample, u8 index) +{ + return (u8) ((sample >> index) & 1); +} + +static inline u32 clearBitAtPos(u32 value, u8 bit) +{ + return value & ~(1 << bit); +} + +static inline u32 setBitAtPos(u32 sample, u8 bit) +{ + sample |= (1 << bit); + return sample; + +} + +#endif diff --git a/drivers/media/pci/cx25821/cx25821-cards.c b/drivers/media/pci/cx25821/cx25821-cards.c new file mode 100644 index 00000000..3b409feb --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-cards.c @@ -0,0 +1,49 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * Based on Steven Toth cx23885 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include + +#include "cx25821.h" + +/* board config info */ + +struct cx25821_board cx25821_boards[] = { + [UNKNOWN_BOARD] = { + .name = "UNKNOWN/GENERIC", + /* Ensure safe default for unknown boards */ + .clk_freq = 0, + }, + + [CX25821_BOARD] = { + .name = "CX25821", + .portb = CX25821_RAW, + .portc = CX25821_264, + }, + +}; + +const unsigned int cx25821_bcount = ARRAY_SIZE(cx25821_boards); diff --git a/drivers/media/pci/cx25821/cx25821-core.c b/drivers/media/pci/cx25821/cx25821-core.c new file mode 100644 index 00000000..b762c5b2 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-core.c @@ -0,0 +1,1409 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * Based on Steven Toth cx23885 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include "cx25821.h" +#include "cx25821-sram.h" +#include "cx25821-video.h" + +MODULE_DESCRIPTION("Driver for Athena cards"); +MODULE_AUTHOR("Shu Lin - Hiep Huynh"); +MODULE_LICENSE("GPL"); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +static unsigned int card[] = {[0 ... (CX25821_MAXBOARDS - 1)] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +const struct sram_channel cx25821_sram_channels[] = { + [SRAM_CH00] = { + .i = SRAM_CH00, + .name = "VID A", + .cmds_start = VID_A_DOWN_CMDS, + .ctrl_start = VID_A_IQ, + .cdt = VID_A_CDT, + .fifo_start = VID_A_DOWN_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA1_PTR1, + .ptr2_reg = DMA1_PTR2, + .cnt1_reg = DMA1_CNT1, + .cnt2_reg = DMA1_CNT2, + .int_msk = VID_A_INT_MSK, + .int_stat = VID_A_INT_STAT, + .int_mstat = VID_A_INT_MSTAT, + .dma_ctl = VID_DST_A_DMA_CTL, + .gpcnt_ctl = VID_DST_A_GPCNT_CTL, + .gpcnt = VID_DST_A_GPCNT, + .vip_ctl = VID_DST_A_VIP_CTL, + .pix_frmt = VID_DST_A_PIX_FRMT, + }, + + [SRAM_CH01] = { + .i = SRAM_CH01, + .name = "VID B", + .cmds_start = VID_B_DOWN_CMDS, + .ctrl_start = VID_B_IQ, + .cdt = VID_B_CDT, + .fifo_start = VID_B_DOWN_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA2_PTR1, + .ptr2_reg = DMA2_PTR2, + .cnt1_reg = DMA2_CNT1, + .cnt2_reg = DMA2_CNT2, + .int_msk = VID_B_INT_MSK, + .int_stat = VID_B_INT_STAT, + .int_mstat = VID_B_INT_MSTAT, + .dma_ctl = VID_DST_B_DMA_CTL, + .gpcnt_ctl = VID_DST_B_GPCNT_CTL, + .gpcnt = VID_DST_B_GPCNT, + .vip_ctl = VID_DST_B_VIP_CTL, + .pix_frmt = VID_DST_B_PIX_FRMT, + }, + + [SRAM_CH02] = { + .i = SRAM_CH02, + .name = "VID C", + .cmds_start = VID_C_DOWN_CMDS, + .ctrl_start = VID_C_IQ, + .cdt = VID_C_CDT, + .fifo_start = VID_C_DOWN_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA3_PTR1, + .ptr2_reg = DMA3_PTR2, + .cnt1_reg = DMA3_CNT1, + .cnt2_reg = DMA3_CNT2, + .int_msk = VID_C_INT_MSK, + .int_stat = VID_C_INT_STAT, + .int_mstat = VID_C_INT_MSTAT, + .dma_ctl = VID_DST_C_DMA_CTL, + .gpcnt_ctl = VID_DST_C_GPCNT_CTL, + .gpcnt = VID_DST_C_GPCNT, + .vip_ctl = VID_DST_C_VIP_CTL, + .pix_frmt = VID_DST_C_PIX_FRMT, + }, + + [SRAM_CH03] = { + .i = SRAM_CH03, + .name = "VID D", + .cmds_start = VID_D_DOWN_CMDS, + .ctrl_start = VID_D_IQ, + .cdt = VID_D_CDT, + .fifo_start = VID_D_DOWN_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA4_PTR1, + .ptr2_reg = DMA4_PTR2, + .cnt1_reg = DMA4_CNT1, + .cnt2_reg = DMA4_CNT2, + .int_msk = VID_D_INT_MSK, + .int_stat = VID_D_INT_STAT, + .int_mstat = VID_D_INT_MSTAT, + .dma_ctl = VID_DST_D_DMA_CTL, + .gpcnt_ctl = VID_DST_D_GPCNT_CTL, + .gpcnt = VID_DST_D_GPCNT, + .vip_ctl = VID_DST_D_VIP_CTL, + .pix_frmt = VID_DST_D_PIX_FRMT, + }, + + [SRAM_CH04] = { + .i = SRAM_CH04, + .name = "VID E", + .cmds_start = VID_E_DOWN_CMDS, + .ctrl_start = VID_E_IQ, + .cdt = VID_E_CDT, + .fifo_start = VID_E_DOWN_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + .int_msk = VID_E_INT_MSK, + .int_stat = VID_E_INT_STAT, + .int_mstat = VID_E_INT_MSTAT, + .dma_ctl = VID_DST_E_DMA_CTL, + .gpcnt_ctl = VID_DST_E_GPCNT_CTL, + .gpcnt = VID_DST_E_GPCNT, + .vip_ctl = VID_DST_E_VIP_CTL, + .pix_frmt = VID_DST_E_PIX_FRMT, + }, + + [SRAM_CH05] = { + .i = SRAM_CH05, + .name = "VID F", + .cmds_start = VID_F_DOWN_CMDS, + .ctrl_start = VID_F_IQ, + .cdt = VID_F_CDT, + .fifo_start = VID_F_DOWN_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA6_PTR1, + .ptr2_reg = DMA6_PTR2, + .cnt1_reg = DMA6_CNT1, + .cnt2_reg = DMA6_CNT2, + .int_msk = VID_F_INT_MSK, + .int_stat = VID_F_INT_STAT, + .int_mstat = VID_F_INT_MSTAT, + .dma_ctl = VID_DST_F_DMA_CTL, + .gpcnt_ctl = VID_DST_F_GPCNT_CTL, + .gpcnt = VID_DST_F_GPCNT, + .vip_ctl = VID_DST_F_VIP_CTL, + .pix_frmt = VID_DST_F_PIX_FRMT, + }, + + [SRAM_CH06] = { + .i = SRAM_CH06, + .name = "VID G", + .cmds_start = VID_G_DOWN_CMDS, + .ctrl_start = VID_G_IQ, + .cdt = VID_G_CDT, + .fifo_start = VID_G_DOWN_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA7_PTR1, + .ptr2_reg = DMA7_PTR2, + .cnt1_reg = DMA7_CNT1, + .cnt2_reg = DMA7_CNT2, + .int_msk = VID_G_INT_MSK, + .int_stat = VID_G_INT_STAT, + .int_mstat = VID_G_INT_MSTAT, + .dma_ctl = VID_DST_G_DMA_CTL, + .gpcnt_ctl = VID_DST_G_GPCNT_CTL, + .gpcnt = VID_DST_G_GPCNT, + .vip_ctl = VID_DST_G_VIP_CTL, + .pix_frmt = VID_DST_G_PIX_FRMT, + }, + + [SRAM_CH07] = { + .i = SRAM_CH07, + .name = "VID H", + .cmds_start = VID_H_DOWN_CMDS, + .ctrl_start = VID_H_IQ, + .cdt = VID_H_CDT, + .fifo_start = VID_H_DOWN_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA8_PTR1, + .ptr2_reg = DMA8_PTR2, + .cnt1_reg = DMA8_CNT1, + .cnt2_reg = DMA8_CNT2, + .int_msk = VID_H_INT_MSK, + .int_stat = VID_H_INT_STAT, + .int_mstat = VID_H_INT_MSTAT, + .dma_ctl = VID_DST_H_DMA_CTL, + .gpcnt_ctl = VID_DST_H_GPCNT_CTL, + .gpcnt = VID_DST_H_GPCNT, + .vip_ctl = VID_DST_H_VIP_CTL, + .pix_frmt = VID_DST_H_PIX_FRMT, + }, + + [SRAM_CH08] = { + .name = "audio from", + .cmds_start = AUD_A_DOWN_CMDS, + .ctrl_start = AUD_A_IQ, + .cdt = AUD_A_CDT, + .fifo_start = AUD_A_DOWN_CLUSTER_1, + .fifo_size = AUDIO_CLUSTER_SIZE * 3, + .ptr1_reg = DMA17_PTR1, + .ptr2_reg = DMA17_PTR2, + .cnt1_reg = DMA17_CNT1, + .cnt2_reg = DMA17_CNT2, + }, + + [SRAM_CH09] = { + .i = SRAM_CH09, + .name = "VID Upstream I", + .cmds_start = VID_I_UP_CMDS, + .ctrl_start = VID_I_IQ, + .cdt = VID_I_CDT, + .fifo_start = VID_I_UP_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA15_PTR1, + .ptr2_reg = DMA15_PTR2, + .cnt1_reg = DMA15_CNT1, + .cnt2_reg = DMA15_CNT2, + .int_msk = VID_I_INT_MSK, + .int_stat = VID_I_INT_STAT, + .int_mstat = VID_I_INT_MSTAT, + .dma_ctl = VID_SRC_I_DMA_CTL, + .gpcnt_ctl = VID_SRC_I_GPCNT_CTL, + .gpcnt = VID_SRC_I_GPCNT, + + .vid_fmt_ctl = VID_SRC_I_FMT_CTL, + .vid_active_ctl1 = VID_SRC_I_ACTIVE_CTL1, + .vid_active_ctl2 = VID_SRC_I_ACTIVE_CTL2, + .vid_cdt_size = VID_SRC_I_CDT_SZ, + .irq_bit = 8, + }, + + [SRAM_CH10] = { + .i = SRAM_CH10, + .name = "VID Upstream J", + .cmds_start = VID_J_UP_CMDS, + .ctrl_start = VID_J_IQ, + .cdt = VID_J_CDT, + .fifo_start = VID_J_UP_CLUSTER_1, + .fifo_size = (VID_CLUSTER_SIZE << 2), + .ptr1_reg = DMA16_PTR1, + .ptr2_reg = DMA16_PTR2, + .cnt1_reg = DMA16_CNT1, + .cnt2_reg = DMA16_CNT2, + .int_msk = VID_J_INT_MSK, + .int_stat = VID_J_INT_STAT, + .int_mstat = VID_J_INT_MSTAT, + .dma_ctl = VID_SRC_J_DMA_CTL, + .gpcnt_ctl = VID_SRC_J_GPCNT_CTL, + .gpcnt = VID_SRC_J_GPCNT, + + .vid_fmt_ctl = VID_SRC_J_FMT_CTL, + .vid_active_ctl1 = VID_SRC_J_ACTIVE_CTL1, + .vid_active_ctl2 = VID_SRC_J_ACTIVE_CTL2, + .vid_cdt_size = VID_SRC_J_CDT_SZ, + .irq_bit = 9, + }, + + [SRAM_CH11] = { + .i = SRAM_CH11, + .name = "Audio Upstream Channel B", + .cmds_start = AUD_B_UP_CMDS, + .ctrl_start = AUD_B_IQ, + .cdt = AUD_B_CDT, + .fifo_start = AUD_B_UP_CLUSTER_1, + .fifo_size = (AUDIO_CLUSTER_SIZE * 3), + .ptr1_reg = DMA22_PTR1, + .ptr2_reg = DMA22_PTR2, + .cnt1_reg = DMA22_CNT1, + .cnt2_reg = DMA22_CNT2, + .int_msk = AUD_B_INT_MSK, + .int_stat = AUD_B_INT_STAT, + .int_mstat = AUD_B_INT_MSTAT, + .dma_ctl = AUD_INT_DMA_CTL, + .gpcnt_ctl = AUD_B_GPCNT_CTL, + .gpcnt = AUD_B_GPCNT, + .aud_length = AUD_B_LNGTH, + .aud_cfg = AUD_B_CFG, + .fld_aud_fifo_en = FLD_AUD_SRC_B_FIFO_EN, + .fld_aud_risc_en = FLD_AUD_SRC_B_RISC_EN, + .irq_bit = 11, + }, +}; +EXPORT_SYMBOL(cx25821_sram_channels); + +static int cx25821_risc_decode(u32 risc) +{ + static const char * const instr[16] = { + [RISC_SYNC >> 28] = "sync", + [RISC_WRITE >> 28] = "write", + [RISC_WRITEC >> 28] = "writec", + [RISC_READ >> 28] = "read", + [RISC_READC >> 28] = "readc", + [RISC_JUMP >> 28] = "jump", + [RISC_SKIP >> 28] = "skip", + [RISC_WRITERM >> 28] = "writerm", + [RISC_WRITECM >> 28] = "writecm", + [RISC_WRITECR >> 28] = "writecr", + }; + static const int incr[16] = { + [RISC_WRITE >> 28] = 3, + [RISC_JUMP >> 28] = 3, + [RISC_SKIP >> 28] = 1, + [RISC_SYNC >> 28] = 1, + [RISC_WRITERM >> 28] = 3, + [RISC_WRITECM >> 28] = 3, + [RISC_WRITECR >> 28] = 4, + }; + static const char * const bits[] = { + "12", "13", "14", "resync", + "cnt0", "cnt1", "18", "19", + "20", "21", "22", "23", + "irq1", "irq2", "eol", "sol", + }; + int i; + + pr_cont("0x%08x [ %s", + risc, instr[risc >> 28] ? instr[risc >> 28] : "INVALID"); + for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--) { + if (risc & (1 << (i + 12))) + pr_cont(" %s", bits[i]); + } + pr_cont(" count=%d ]\n", risc & 0xfff); + return incr[risc >> 28] ? incr[risc >> 28] : 1; +} + +static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap) +{ + struct cx25821_i2c *bus = i2c_adap->algo_data; + struct cx25821_dev *dev = bus->dev; + return cx_read(bus->reg_stat) & 0x01; +} + +static void cx25821_registers_init(struct cx25821_dev *dev) +{ + u32 tmp; + + /* enable RUN_RISC in Pecos */ + cx_write(DEV_CNTRL2, 0x20); + + /* Set the master PCI interrupt masks to enable video, audio, MBIF, + * and GPIO interrupts + * I2C interrupt masking is handled by the I2C objects themselves. */ + cx_write(PCI_INT_MSK, 0x2001FFFF); + + tmp = cx_read(RDR_TLCTL0); + tmp &= ~FLD_CFG_RCB_CK_EN; /* Clear the RCB_CK_EN bit */ + cx_write(RDR_TLCTL0, tmp); + + /* PLL-A setting for the Audio Master Clock */ + cx_write(PLL_A_INT_FRAC, 0x9807A58B); + + /* PLL_A_POST = 0x1C, PLL_A_OUT_TO_PIN = 0x1 */ + cx_write(PLL_A_POST_STAT_BIST, 0x8000019C); + + /* clear reset bit [31] */ + tmp = cx_read(PLL_A_INT_FRAC); + cx_write(PLL_A_INT_FRAC, tmp & 0x7FFFFFFF); + + /* PLL-B setting for Mobilygen Host Bus Interface */ + cx_write(PLL_B_INT_FRAC, 0x9883A86F); + + /* PLL_B_POST = 0xD, PLL_B_OUT_TO_PIN = 0x0 */ + cx_write(PLL_B_POST_STAT_BIST, 0x8000018D); + + /* clear reset bit [31] */ + tmp = cx_read(PLL_B_INT_FRAC); + cx_write(PLL_B_INT_FRAC, tmp & 0x7FFFFFFF); + + /* PLL-C setting for video upstream channel */ + cx_write(PLL_C_INT_FRAC, 0x96A0EA3F); + + /* PLL_C_POST = 0x3, PLL_C_OUT_TO_PIN = 0x0 */ + cx_write(PLL_C_POST_STAT_BIST, 0x80000103); + + /* clear reset bit [31] */ + tmp = cx_read(PLL_C_INT_FRAC); + cx_write(PLL_C_INT_FRAC, tmp & 0x7FFFFFFF); + + /* PLL-D setting for audio upstream channel */ + cx_write(PLL_D_INT_FRAC, 0x98757F5B); + + /* PLL_D_POST = 0x13, PLL_D_OUT_TO_PIN = 0x0 */ + cx_write(PLL_D_POST_STAT_BIST, 0x80000113); + + /* clear reset bit [31] */ + tmp = cx_read(PLL_D_INT_FRAC); + cx_write(PLL_D_INT_FRAC, tmp & 0x7FFFFFFF); + + /* This selects the PLL C clock source for the video upstream channel + * I and J */ + tmp = cx_read(VID_CH_CLK_SEL); + cx_write(VID_CH_CLK_SEL, (tmp & 0x00FFFFFF) | 0x24000000); + + /* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for + * channel A-C + * select 656/VIP DST for downstream Channel A - C */ + tmp = cx_read(VID_CH_MODE_SEL); + /* cx_write( VID_CH_MODE_SEL, tmp | 0x1B0001FF); */ + cx_write(VID_CH_MODE_SEL, tmp & 0xFFFFFE00); + + /* enables 656 port I and J as output */ + tmp = cx_read(CLK_RST); + /* use external ALT_PLL_REF pin as its reference clock instead */ + tmp |= FLD_USE_ALT_PLL_REF; + cx_write(CLK_RST, tmp & ~(FLD_VID_I_CLK_NOE | FLD_VID_J_CLK_NOE)); + + mdelay(100); +} + +int cx25821_sram_channel_setup(struct cx25821_dev *dev, + const struct sram_channel *ch, + unsigned int bpl, u32 risc) +{ + unsigned int i, lines; + u32 cdt; + + if (ch->cmds_start == 0) { + cx_write(ch->ptr1_reg, 0); + cx_write(ch->ptr2_reg, 0); + cx_write(ch->cnt2_reg, 0); + cx_write(ch->cnt1_reg, 0); + return 0; + } + + bpl = (bpl + 7) & ~7; /* alignment */ + cdt = ch->cdt; + lines = ch->fifo_size / bpl; + + if (lines > 4) + lines = 4; + + BUG_ON(lines < 2); + + cx_write(8 + 0, RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + cx_write(8 + 4, 8); + cx_write(8 + 8, 0); + + /* write CDT */ + for (i = 0; i < lines; i++) { + cx_write(cdt + 16 * i, ch->fifo_start + bpl * i); + cx_write(cdt + 16 * i + 4, 0); + cx_write(cdt + 16 * i + 8, 0); + cx_write(cdt + 16 * i + 12, 0); + } + + /* init the first cdt buffer */ + for (i = 0; i < 128; i++) + cx_write(ch->fifo_start + 4 * i, i); + + /* write CMDS */ + if (ch->jumponly) + cx_write(ch->cmds_start + 0, 8); + else + cx_write(ch->cmds_start + 0, risc); + + cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */ + cx_write(ch->cmds_start + 8, cdt); + cx_write(ch->cmds_start + 12, (lines * 16) >> 3); + cx_write(ch->cmds_start + 16, ch->ctrl_start); + + if (ch->jumponly) + cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2)); + else + cx_write(ch->cmds_start + 20, 64 >> 2); + + for (i = 24; i < 80; i += 4) + cx_write(ch->cmds_start + i, 0); + + /* fill registers */ + cx_write(ch->ptr1_reg, ch->fifo_start); + cx_write(ch->ptr2_reg, cdt); + cx_write(ch->cnt2_reg, (lines * 16) >> 3); + cx_write(ch->cnt1_reg, (bpl >> 3) - 1); + + return 0; +} + +int cx25821_sram_channel_setup_audio(struct cx25821_dev *dev, + const struct sram_channel *ch, + unsigned int bpl, u32 risc) +{ + unsigned int i, lines; + u32 cdt; + + if (ch->cmds_start == 0) { + cx_write(ch->ptr1_reg, 0); + cx_write(ch->ptr2_reg, 0); + cx_write(ch->cnt2_reg, 0); + cx_write(ch->cnt1_reg, 0); + return 0; + } + + bpl = (bpl + 7) & ~7; /* alignment */ + cdt = ch->cdt; + lines = ch->fifo_size / bpl; + + if (lines > 3) + lines = 3; /* for AUDIO */ + + BUG_ON(lines < 2); + + cx_write(8 + 0, RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + cx_write(8 + 4, 8); + cx_write(8 + 8, 0); + + /* write CDT */ + for (i = 0; i < lines; i++) { + cx_write(cdt + 16 * i, ch->fifo_start + bpl * i); + cx_write(cdt + 16 * i + 4, 0); + cx_write(cdt + 16 * i + 8, 0); + cx_write(cdt + 16 * i + 12, 0); + } + + /* write CMDS */ + if (ch->jumponly) + cx_write(ch->cmds_start + 0, 8); + else + cx_write(ch->cmds_start + 0, risc); + + cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */ + cx_write(ch->cmds_start + 8, cdt); + cx_write(ch->cmds_start + 12, (lines * 16) >> 3); + cx_write(ch->cmds_start + 16, ch->ctrl_start); + + /* IQ size */ + if (ch->jumponly) + cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2)); + else + cx_write(ch->cmds_start + 20, 64 >> 2); + + /* zero out */ + for (i = 24; i < 80; i += 4) + cx_write(ch->cmds_start + i, 0); + + /* fill registers */ + cx_write(ch->ptr1_reg, ch->fifo_start); + cx_write(ch->ptr2_reg, cdt); + cx_write(ch->cnt2_reg, (lines * 16) >> 3); + cx_write(ch->cnt1_reg, (bpl >> 3) - 1); + + return 0; +} +EXPORT_SYMBOL(cx25821_sram_channel_setup_audio); + +void cx25821_sram_channel_dump(struct cx25821_dev *dev, const struct sram_channel *ch) +{ + static char *name[] = { + "init risc lo", + "init risc hi", + "cdt base", + "cdt size", + "iq base", + "iq size", + "risc pc lo", + "risc pc hi", + "iq wr ptr", + "iq rd ptr", + "cdt current", + "pci target lo", + "pci target hi", + "line / byte", + }; + u32 risc; + unsigned int i, j, n; + + pr_warn("%s: %s - dma channel status dump\n", dev->name, ch->name); + for (i = 0; i < ARRAY_SIZE(name); i++) + pr_warn("cmds + 0x%2x: %-15s: 0x%08x\n", + i * 4, name[i], cx_read(ch->cmds_start + 4 * i)); + + j = i * 4; + for (i = 0; i < 4;) { + risc = cx_read(ch->cmds_start + 4 * (i + 14)); + pr_warn("cmds + 0x%2x: risc%d: ", j + i * 4, i); + i += cx25821_risc_decode(risc); + } + + for (i = 0; i < (64 >> 2); i += n) { + risc = cx_read(ch->ctrl_start + 4 * i); + /* No consideration for bits 63-32 */ + + pr_warn("ctrl + 0x%2x (0x%08x): iq %x: ", + i * 4, ch->ctrl_start + 4 * i, i); + n = cx25821_risc_decode(risc); + for (j = 1; j < n; j++) { + risc = cx_read(ch->ctrl_start + 4 * (i + j)); + pr_warn("ctrl + 0x%2x : iq %x: 0x%08x [ arg #%d ]\n", + 4 * (i + j), i + j, risc, j); + } + } + + pr_warn(" : fifo: 0x%08x -> 0x%x\n", + ch->fifo_start, ch->fifo_start + ch->fifo_size); + pr_warn(" : ctrl: 0x%08x -> 0x%x\n", + ch->ctrl_start, ch->ctrl_start + 6 * 16); + pr_warn(" : ptr1_reg: 0x%08x\n", + cx_read(ch->ptr1_reg)); + pr_warn(" : ptr2_reg: 0x%08x\n", + cx_read(ch->ptr2_reg)); + pr_warn(" : cnt1_reg: 0x%08x\n", + cx_read(ch->cnt1_reg)); + pr_warn(" : cnt2_reg: 0x%08x\n", + cx_read(ch->cnt2_reg)); +} + +void cx25821_sram_channel_dump_audio(struct cx25821_dev *dev, + const struct sram_channel *ch) +{ + static const char * const name[] = { + "init risc lo", + "init risc hi", + "cdt base", + "cdt size", + "iq base", + "iq size", + "risc pc lo", + "risc pc hi", + "iq wr ptr", + "iq rd ptr", + "cdt current", + "pci target lo", + "pci target hi", + "line / byte", + }; + + u32 risc, value, tmp; + unsigned int i, j, n; + + pr_info("\n%s: %s - dma Audio channel status dump\n", + dev->name, ch->name); + + for (i = 0; i < ARRAY_SIZE(name); i++) + pr_info("%s: cmds + 0x%2x: %-15s: 0x%08x\n", + dev->name, i * 4, name[i], + cx_read(ch->cmds_start + 4 * i)); + + j = i * 4; + for (i = 0; i < 4;) { + risc = cx_read(ch->cmds_start + 4 * (i + 14)); + pr_warn("cmds + 0x%2x: risc%d: ", j + i * 4, i); + i += cx25821_risc_decode(risc); + } + + for (i = 0; i < (64 >> 2); i += n) { + risc = cx_read(ch->ctrl_start + 4 * i); + /* No consideration for bits 63-32 */ + + pr_warn("ctrl + 0x%2x (0x%08x): iq %x: ", + i * 4, ch->ctrl_start + 4 * i, i); + n = cx25821_risc_decode(risc); + + for (j = 1; j < n; j++) { + risc = cx_read(ch->ctrl_start + 4 * (i + j)); + pr_warn("ctrl + 0x%2x : iq %x: 0x%08x [ arg #%d ]\n", + 4 * (i + j), i + j, risc, j); + } + } + + pr_warn(" : fifo: 0x%08x -> 0x%x\n", + ch->fifo_start, ch->fifo_start + ch->fifo_size); + pr_warn(" : ctrl: 0x%08x -> 0x%x\n", + ch->ctrl_start, ch->ctrl_start + 6 * 16); + pr_warn(" : ptr1_reg: 0x%08x\n", + cx_read(ch->ptr1_reg)); + pr_warn(" : ptr2_reg: 0x%08x\n", + cx_read(ch->ptr2_reg)); + pr_warn(" : cnt1_reg: 0x%08x\n", + cx_read(ch->cnt1_reg)); + pr_warn(" : cnt2_reg: 0x%08x\n", + cx_read(ch->cnt2_reg)); + + for (i = 0; i < 4; i++) { + risc = cx_read(ch->cmds_start + 56 + (i * 4)); + pr_warn("instruction %d = 0x%x\n", i, risc); + } + + /* read data from the first cdt buffer */ + risc = cx_read(AUD_A_CDT); + pr_warn("\nread cdt loc=0x%x\n", risc); + for (i = 0; i < 8; i++) { + n = cx_read(risc + i * 4); + pr_cont("0x%x ", n); + } + pr_cont("\n\n"); + + value = cx_read(CLK_RST); + CX25821_INFO(" CLK_RST = 0x%x\n\n", value); + + value = cx_read(PLL_A_POST_STAT_BIST); + CX25821_INFO(" PLL_A_POST_STAT_BIST = 0x%x\n\n", value); + value = cx_read(PLL_A_INT_FRAC); + CX25821_INFO(" PLL_A_INT_FRAC = 0x%x\n\n", value); + + value = cx_read(PLL_B_POST_STAT_BIST); + CX25821_INFO(" PLL_B_POST_STAT_BIST = 0x%x\n\n", value); + value = cx_read(PLL_B_INT_FRAC); + CX25821_INFO(" PLL_B_INT_FRAC = 0x%x\n\n", value); + + value = cx_read(PLL_C_POST_STAT_BIST); + CX25821_INFO(" PLL_C_POST_STAT_BIST = 0x%x\n\n", value); + value = cx_read(PLL_C_INT_FRAC); + CX25821_INFO(" PLL_C_INT_FRAC = 0x%x\n\n", value); + + value = cx_read(PLL_D_POST_STAT_BIST); + CX25821_INFO(" PLL_D_POST_STAT_BIST = 0x%x\n\n", value); + value = cx_read(PLL_D_INT_FRAC); + CX25821_INFO(" PLL_D_INT_FRAC = 0x%x\n\n", value); + + value = cx25821_i2c_read(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL, &tmp); + CX25821_INFO(" AFE_AB_DIAG_CTRL (0x10900090) = 0x%x\n\n", value); +} +EXPORT_SYMBOL(cx25821_sram_channel_dump_audio); + +static void cx25821_shutdown(struct cx25821_dev *dev) +{ + int i; + + /* disable RISC controller */ + cx_write(DEV_CNTRL2, 0); + + /* Disable Video A/B activity */ + for (i = 0; i < VID_CHANNEL_NUM; i++) { + cx_write(dev->channels[i].sram_channels->dma_ctl, 0); + cx_write(dev->channels[i].sram_channels->int_msk, 0); + } + + for (i = VID_UPSTREAM_SRAM_CHANNEL_I; + i <= VID_UPSTREAM_SRAM_CHANNEL_J; i++) { + cx_write(dev->channels[i].sram_channels->dma_ctl, 0); + cx_write(dev->channels[i].sram_channels->int_msk, 0); + } + + /* Disable Audio activity */ + cx_write(AUD_INT_DMA_CTL, 0); + + /* Disable Serial port */ + cx_write(UART_CTL, 0); + + /* Disable Interrupts */ + cx_write(PCI_INT_MSK, 0); + cx_write(AUD_A_INT_MSK, 0); +} + +void cx25821_set_pixel_format(struct cx25821_dev *dev, int channel_select, + u32 format) +{ + if (channel_select <= 7 && channel_select >= 0) { + cx_write(dev->channels[channel_select].sram_channels->pix_frmt, + format); + } + dev->channels[channel_select].pixel_formats = format; +} + +static void cx25821_set_vip_mode(struct cx25821_dev *dev, + const struct sram_channel *ch) +{ + cx_write(ch->pix_frmt, PIXEL_FRMT_422); + cx_write(ch->vip_ctl, PIXEL_ENGINE_VIP1); +} + +static void cx25821_initialize(struct cx25821_dev *dev) +{ + int i; + + dprintk(1, "%s()\n", __func__); + + cx25821_shutdown(dev); + cx_write(PCI_INT_STAT, 0xffffffff); + + for (i = 0; i < VID_CHANNEL_NUM; i++) + cx_write(dev->channels[i].sram_channels->int_stat, 0xffffffff); + + cx_write(AUD_A_INT_STAT, 0xffffffff); + cx_write(AUD_B_INT_STAT, 0xffffffff); + cx_write(AUD_C_INT_STAT, 0xffffffff); + cx_write(AUD_D_INT_STAT, 0xffffffff); + cx_write(AUD_E_INT_STAT, 0xffffffff); + + cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000); + cx_write(PAD_CTRL, 0x12); /* for I2C */ + cx25821_registers_init(dev); /* init Pecos registers */ + mdelay(100); + + for (i = 0; i < VID_CHANNEL_NUM; i++) { + cx25821_set_vip_mode(dev, dev->channels[i].sram_channels); + cx25821_sram_channel_setup(dev, dev->channels[i].sram_channels, + 1440, 0); + dev->channels[i].pixel_formats = PIXEL_FRMT_422; + dev->channels[i].use_cif_resolution = 0; + } + + /* Probably only affect Downstream */ + for (i = VID_UPSTREAM_SRAM_CHANNEL_I; + i <= VID_UPSTREAM_SRAM_CHANNEL_J; i++) { + dev->channels[i].pixel_formats = PIXEL_FRMT_422; + cx25821_set_vip_mode(dev, dev->channels[i].sram_channels); + } + + cx25821_sram_channel_setup_audio(dev, + dev->channels[SRAM_CH08].sram_channels, 128, 0); + + cx25821_gpio_init(dev); +} + +static int cx25821_get_resources(struct cx25821_dev *dev) +{ + if (request_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0), dev->name)) + return 0; + + pr_err("%s: can't get MMIO memory @ 0x%llx\n", + dev->name, (unsigned long long)pci_resource_start(dev->pci, 0)); + + return -EBUSY; +} + +static void cx25821_dev_checkrevision(struct cx25821_dev *dev) +{ + dev->hwrevision = cx_read(RDR_CFG2) & 0xff; + + pr_info("Hardware revision = 0x%02x\n", dev->hwrevision); +} + +static void cx25821_iounmap(struct cx25821_dev *dev) +{ + if (dev == NULL) + return; + + /* Releasing IO memory */ + if (dev->lmmio != NULL) { + iounmap(dev->lmmio); + dev->lmmio = NULL; + } +} + +static int cx25821_dev_setup(struct cx25821_dev *dev) +{ + static unsigned int cx25821_devcount; + int i; + + mutex_init(&dev->lock); + + dev->nr = ++cx25821_devcount; + sprintf(dev->name, "cx25821[%d]", dev->nr); + + if (dev->pci->device != 0x8210) { + pr_info("%s(): Exiting. Incorrect Hardware device = 0x%02x\n", + __func__, dev->pci->device); + return -1; + } else { + pr_info("Athena Hardware device = 0x%02x\n", dev->pci->device); + } + + /* Apply a sensible clock frequency for the PCIe bridge */ + dev->clk_freq = 28000000; + for (i = 0; i < MAX_VID_CHANNEL_NUM; i++) { + dev->channels[i].dev = dev; + dev->channels[i].id = i; + dev->channels[i].sram_channels = &cx25821_sram_channels[i]; + } + + if (dev->nr > 1) + CX25821_INFO("dev->nr > 1!"); + + /* board config */ + dev->board = 1; /* card[dev->nr]; */ + dev->_max_num_decoders = MAX_DECODERS; + + dev->pci_bus = dev->pci->bus->number; + dev->pci_slot = PCI_SLOT(dev->pci->devfn); + dev->pci_irqmask = 0x001f00; + + /* External Master 1 Bus */ + dev->i2c_bus[0].nr = 0; + dev->i2c_bus[0].dev = dev; + dev->i2c_bus[0].reg_stat = I2C1_STAT; + dev->i2c_bus[0].reg_ctrl = I2C1_CTRL; + dev->i2c_bus[0].reg_addr = I2C1_ADDR; + dev->i2c_bus[0].reg_rdata = I2C1_RDATA; + dev->i2c_bus[0].reg_wdata = I2C1_WDATA; + dev->i2c_bus[0].i2c_period = (0x07 << 24); /* 1.95MHz */ + + if (cx25821_get_resources(dev) < 0) { + pr_err("%s: No more PCIe resources for subsystem: %04x:%04x\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device); + + cx25821_devcount--; + return -EBUSY; + } + + /* PCIe stuff */ + dev->base_io_addr = pci_resource_start(dev->pci, 0); + + if (!dev->base_io_addr) { + CX25821_ERR("No PCI Memory resources, exiting!\n"); + return -ENODEV; + } + + dev->lmmio = ioremap(dev->base_io_addr, pci_resource_len(dev->pci, 0)); + + if (!dev->lmmio) { + CX25821_ERR("ioremap failed, maybe increasing __VMALLOC_RESERVE in page.h\n"); + cx25821_iounmap(dev); + return -ENOMEM; + } + + dev->bmmio = (u8 __iomem *) dev->lmmio; + + pr_info("%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device, cx25821_boards[dev->board].name, + dev->board, card[dev->nr] == dev->board ? + "insmod option" : "autodetected"); + + /* init hardware */ + cx25821_initialize(dev); + + cx25821_i2c_register(&dev->i2c_bus[0]); +/* cx25821_i2c_register(&dev->i2c_bus[1]); + * cx25821_i2c_register(&dev->i2c_bus[2]); */ + + if (medusa_video_init(dev) < 0) + CX25821_ERR("%s(): Failed to initialize medusa!\n", __func__); + + cx25821_video_register(dev); + + cx25821_dev_checkrevision(dev); + return 0; +} + +void cx25821_dev_unregister(struct cx25821_dev *dev) +{ + int i; + + if (!dev->base_io_addr) + return; + + release_mem_region(dev->base_io_addr, pci_resource_len(dev->pci, 0)); + + for (i = 0; i < MAX_VID_CHANNEL_NUM - 1; i++) { + if (i == SRAM_CH08) /* audio channel */ + continue; + if (i == SRAM_CH09 || i == SRAM_CH10) + cx25821_free_mem_upstream(&dev->channels[i]); + cx25821_video_unregister(dev, i); + } + + cx25821_i2c_unregister(&dev->i2c_bus[0]); + cx25821_iounmap(dev); +} +EXPORT_SYMBOL(cx25821_dev_unregister); + +static __le32 *cx25821_risc_field(__le32 * rp, struct scatterlist *sglist, + unsigned int offset, u32 sync_line, + unsigned int bpl, unsigned int padding, + unsigned int lines) +{ + struct scatterlist *sg; + unsigned int line, todo; + + /* sync instruction */ + if (sync_line != NO_SYNC_LINE) + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + /* scan lines */ + sg = sglist; + for (line = 0; line < lines; line++) { + while (offset && offset >= sg_dma_len(sg)) { + offset -= sg_dma_len(sg); + sg++; + } + if (bpl <= sg_dma_len(sg) - offset) { + /* fits into current chunk */ + *(rp++) = cpu_to_le32(RISC_WRITE | RISC_SOL | RISC_EOL | + bpl); + *(rp++) = cpu_to_le32(sg_dma_address(sg) + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += bpl; + } else { + /* scanline needs to be split */ + todo = bpl; + *(rp++) = cpu_to_le32(RISC_WRITE | RISC_SOL | + (sg_dma_len(sg) - offset)); + *(rp++) = cpu_to_le32(sg_dma_address(sg) + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + todo -= (sg_dma_len(sg) - offset); + offset = 0; + sg++; + while (todo > sg_dma_len(sg)) { + *(rp++) = cpu_to_le32(RISC_WRITE | + sg_dma_len(sg)); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + todo -= sg_dma_len(sg); + sg++; + } + *(rp++) = cpu_to_le32(RISC_WRITE | RISC_EOL | todo); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += todo; + } + + offset += padding; + } + + return rp; +} + +int cx25821_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, unsigned int top_offset, + unsigned int bottom_offset, unsigned int bpl, + unsigned int padding, unsigned int lines) +{ + u32 instructions; + u32 fields; + __le32 *rp; + int rc; + + fields = 0; + if (UNSET != top_offset) + fields++; + if (UNSET != bottom_offset) + fields++; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + /* write and jump need and extra dword */ + instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + + lines); + instructions += 2; + rc = btcx_riscmem_alloc(pci, risc, instructions * 12); + + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + + if (UNSET != top_offset) { + rp = cx25821_risc_field(rp, sglist, top_offset, 0, bpl, padding, + lines); + } + + if (UNSET != bottom_offset) { + rp = cx25821_risc_field(rp, sglist, bottom_offset, 0x200, bpl, + padding, lines); + } + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + + return 0; +} + +static __le32 *cx25821_risc_field_audio(__le32 * rp, struct scatterlist *sglist, + unsigned int offset, u32 sync_line, + unsigned int bpl, unsigned int padding, + unsigned int lines, unsigned int lpi) +{ + struct scatterlist *sg; + unsigned int line, todo, sol; + + /* sync instruction */ + if (sync_line != NO_SYNC_LINE) + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + /* scan lines */ + sg = sglist; + for (line = 0; line < lines; line++) { + while (offset && offset >= sg_dma_len(sg)) { + offset -= sg_dma_len(sg); + sg++; + } + + if (lpi && line > 0 && !(line % lpi)) + sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC; + else + sol = RISC_SOL; + + if (bpl <= sg_dma_len(sg) - offset) { + /* fits into current chunk */ + *(rp++) = cpu_to_le32(RISC_WRITE | sol | RISC_EOL | + bpl); + *(rp++) = cpu_to_le32(sg_dma_address(sg) + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += bpl; + } else { + /* scanline needs to be split */ + todo = bpl; + *(rp++) = cpu_to_le32(RISC_WRITE | sol | + (sg_dma_len(sg) - offset)); + *(rp++) = cpu_to_le32(sg_dma_address(sg) + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + todo -= (sg_dma_len(sg) - offset); + offset = 0; + sg++; + while (todo > sg_dma_len(sg)) { + *(rp++) = cpu_to_le32(RISC_WRITE | + sg_dma_len(sg)); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + todo -= sg_dma_len(sg); + sg++; + } + *(rp++) = cpu_to_le32(RISC_WRITE | RISC_EOL | todo); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += todo; + } + offset += padding; + } + + return rp; +} + +int cx25821_risc_databuffer_audio(struct pci_dev *pci, + struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int bpl, + unsigned int lines, unsigned int lpi) +{ + u32 instructions; + __le32 *rp; + int rc; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Here + there is no padding and no sync. First DMA region may be smaller + than PAGE_SIZE */ + /* Jump and write need an extra dword */ + instructions = 1 + (bpl * lines) / PAGE_SIZE + lines; + instructions += 1; + + rc = btcx_riscmem_alloc(pci, risc, instructions * 12); + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + rp = cx25821_risc_field_audio(rp, sglist, 0, NO_SYNC_LINE, bpl, 0, + lines, lpi); + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} +EXPORT_SYMBOL(cx25821_risc_databuffer_audio); + +int cx25821_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value) +{ + __le32 *rp; + int rc; + + rc = btcx_riscmem_alloc(pci, risc, 4 * 16); + + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + + *(rp++) = cpu_to_le32(RISC_WRITECR | RISC_IRQ1); + *(rp++) = cpu_to_le32(reg); + *(rp++) = cpu_to_le32(value); + *(rp++) = cpu_to_le32(mask); + *(rp++) = cpu_to_le32(RISC_JUMP); + *(rp++) = cpu_to_le32(risc->dma); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + return 0; +} + +void cx25821_free_buffer(struct videobuf_queue *q, struct cx25821_buffer *buf) +{ + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + + BUG_ON(in_interrupt()); + videobuf_waiton(q, &buf->vb, 0, 0); + videobuf_dma_unmap(q->dev, dma); + videobuf_dma_free(dma); + btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static irqreturn_t cx25821_irq(int irq, void *dev_id) +{ + struct cx25821_dev *dev = dev_id; + u32 pci_status; + u32 vid_status; + int i, handled = 0; + u32 mask[8] = { 1, 2, 4, 8, 16, 32, 64, 128 }; + + pci_status = cx_read(PCI_INT_STAT); + + if (pci_status == 0) + goto out; + + for (i = 0; i < VID_CHANNEL_NUM; i++) { + if (pci_status & mask[i]) { + vid_status = cx_read(dev->channels[i]. + sram_channels->int_stat); + + if (vid_status) + handled += cx25821_video_irq(dev, i, + vid_status); + + cx_write(PCI_INT_STAT, mask[i]); + } + } + +out: + return IRQ_RETVAL(handled); +} + +void cx25821_print_irqbits(char *name, char *tag, char **strings, + int len, u32 bits, u32 mask) +{ + unsigned int i; + + printk(KERN_DEBUG pr_fmt("%s: %s [0x%x]"), name, tag, bits); + + for (i = 0; i < len; i++) { + if (!(bits & (1 << i))) + continue; + if (strings[i]) + pr_cont(" %s", strings[i]); + else + pr_cont(" %d", i); + if (!(mask & (1 << i))) + continue; + pr_cont("*"); + } + pr_cont("\n"); +} +EXPORT_SYMBOL(cx25821_print_irqbits); + +struct cx25821_dev *cx25821_dev_get(struct pci_dev *pci) +{ + struct cx25821_dev *dev = pci_get_drvdata(pci); + return dev; +} +EXPORT_SYMBOL(cx25821_dev_get); + +static int cx25821_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct cx25821_dev *dev; + int err = 0; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev); + if (err < 0) + goto fail_free; + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + + pr_info("pci enable failed!\n"); + + goto fail_unregister_device; + } + + err = cx25821_dev_setup(dev); + if (err) { + if (err == -EBUSY) + goto fail_unregister_device; + else + goto fail_unregister_pci; + } + + /* print pci info */ + pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev); + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + pr_info("%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", + dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat, (unsigned long long)dev->base_io_addr); + + pci_set_master(pci_dev); + if (!pci_dma_supported(pci_dev, 0xffffffff)) { + pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); + err = -EIO; + goto fail_irq; + } + + err = request_irq(pci_dev->irq, cx25821_irq, + IRQF_SHARED, dev->name, dev); + + if (err < 0) { + pr_err("%s: can't get IRQ %d\n", dev->name, pci_dev->irq); + goto fail_irq; + } + + return 0; + +fail_irq: + pr_info("cx25821_initdev() can't get IRQ !\n"); + cx25821_dev_unregister(dev); + +fail_unregister_pci: + pci_disable_device(pci_dev); +fail_unregister_device: + v4l2_device_unregister(&dev->v4l2_dev); + +fail_free: + kfree(dev); + return err; +} + +static void cx25821_finidev(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct cx25821_dev *dev = get_cx25821(v4l2_dev); + + cx25821_shutdown(dev); + pci_disable_device(pci_dev); + + /* unregister stuff */ + if (pci_dev->irq) + free_irq(pci_dev->irq, dev); + + cx25821_dev_unregister(dev); + v4l2_device_unregister(v4l2_dev); + kfree(dev); +} + +static DEFINE_PCI_DEVICE_TABLE(cx25821_pci_tbl) = { + { + /* CX25821 Athena */ + .vendor = 0x14f1, + .device = 0x8210, + .subvendor = 0x14f1, + .subdevice = 0x0920, + }, { + /* CX25821 No Brand */ + .vendor = 0x14f1, + .device = 0x8210, + .subvendor = 0x0000, + .subdevice = 0x0000, + }, { + /* --- end of list --- */ + } +}; + +MODULE_DEVICE_TABLE(pci, cx25821_pci_tbl); + +static struct pci_driver cx25821_pci_driver = { + .name = "cx25821", + .id_table = cx25821_pci_tbl, + .probe = cx25821_initdev, + .remove = cx25821_finidev, + /* TODO */ + .suspend = NULL, + .resume = NULL, +}; + +static int __init cx25821_init(void) +{ + pr_info("driver version %d.%d.%d loaded\n", + (CX25821_VERSION_CODE >> 16) & 0xff, + (CX25821_VERSION_CODE >> 8) & 0xff, + CX25821_VERSION_CODE & 0xff); + return pci_register_driver(&cx25821_pci_driver); +} + +static void __exit cx25821_fini(void) +{ + pci_unregister_driver(&cx25821_pci_driver); +} + +module_init(cx25821_init); +module_exit(cx25821_fini); diff --git a/drivers/media/pci/cx25821/cx25821-gpio.c b/drivers/media/pci/cx25821/cx25821-gpio.c new file mode 100644 index 00000000..95e8ddf6 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-gpio.c @@ -0,0 +1,99 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include "cx25821.h" + +/********************* GPIO stuffs *********************/ +void cx25821_set_gpiopin_direction(struct cx25821_dev *dev, + int pin_number, int pin_logic_value) +{ + int bit = pin_number; + u32 gpio_oe_reg = GPIO_LO_OE; + u32 gpio_register = 0; + u32 value = 0; + + /* Check for valid pinNumber */ + if (pin_number >= 47) + return; + + if (pin_number > 31) { + bit = pin_number - 31; + gpio_oe_reg = GPIO_HI_OE; + } + /* Here we will make sure that the GPIOs 0 and 1 are output. keep the + * rest as is */ + gpio_register = cx_read(gpio_oe_reg); + + if (pin_logic_value == 1) + value = gpio_register | Set_GPIO_Bit(bit); + else + value = gpio_register & Clear_GPIO_Bit(bit); + + cx_write(gpio_oe_reg, value); +} +EXPORT_SYMBOL(cx25821_set_gpiopin_direction); + +static void cx25821_set_gpiopin_logicvalue(struct cx25821_dev *dev, + int pin_number, int pin_logic_value) +{ + int bit = pin_number; + u32 gpio_reg = GPIO_LO; + u32 value = 0; + + /* Check for valid pinNumber */ + if (pin_number >= 47) + return; + + /* change to output direction */ + cx25821_set_gpiopin_direction(dev, pin_number, 0); + + if (pin_number > 31) { + bit = pin_number - 31; + gpio_reg = GPIO_HI; + } + + value = cx_read(gpio_reg); + + if (pin_logic_value == 0) + value &= Clear_GPIO_Bit(bit); + else + value |= Set_GPIO_Bit(bit); + + cx_write(gpio_reg, value); +} + +void cx25821_gpio_init(struct cx25821_dev *dev) +{ + if (dev == NULL) + return; + + switch (dev->board) { + case CX25821_BOARD_CONEXANT_ATHENA10: + default: + /* set GPIO 5 to select the path for Medusa/Athena */ + cx25821_set_gpiopin_logicvalue(dev, 5, 1); + mdelay(20); + break; + } + +} diff --git a/drivers/media/pci/cx25821/cx25821-i2c.c b/drivers/media/pci/cx25821/cx25821-i2c.c new file mode 100644 index 00000000..dca37c7d --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-i2c.c @@ -0,0 +1,419 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * Based on Steven Toth cx23885 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include "cx25821.h" + +static unsigned int i2c_debug; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +static unsigned int i2c_scan; +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); + +#define dprintk(level, fmt, arg...) \ +do { \ + if (i2c_debug >= level) \ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg); \ +} while (0) + +#define I2C_WAIT_DELAY 32 +#define I2C_WAIT_RETRY 64 + +#define I2C_EXTEND (1 << 3) +#define I2C_NOSTOP (1 << 4) + +static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap) +{ + struct cx25821_i2c *bus = i2c_adap->algo_data; + struct cx25821_dev *dev = bus->dev; + return cx_read(bus->reg_stat) & 0x01; +} + +static inline int i2c_is_busy(struct i2c_adapter *i2c_adap) +{ + struct cx25821_i2c *bus = i2c_adap->algo_data; + struct cx25821_dev *dev = bus->dev; + return cx_read(bus->reg_stat) & 0x02 ? 1 : 0; +} + +static int i2c_wait_done(struct i2c_adapter *i2c_adap) +{ + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + if (!i2c_is_busy(i2c_adap)) + break; + udelay(I2C_WAIT_DELAY); + } + + if (I2C_WAIT_RETRY == count) + return 0; + + return 1; +} + +static int i2c_sendbytes(struct i2c_adapter *i2c_adap, + const struct i2c_msg *msg, int joined_rlen) +{ + struct cx25821_i2c *bus = i2c_adap->algo_data; + struct cx25821_dev *dev = bus->dev; + u32 wdata, addr, ctrl; + int retval, cnt; + + if (joined_rlen) + dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __func__, + msg->len, joined_rlen); + else + dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); + + /* Deal with i2c probe functions with zero payload */ + if (msg->len == 0) { + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2)); + + if (!i2c_wait_done(i2c_adap)) + return -EIO; + + if (!i2c_slave_did_ack(i2c_adap)) + return -EIO; + + dprintk(1, "%s(): returns 0\n", __func__); + return 0; + } + + /* dev, reg + first byte */ + addr = (msg->addr << 25) | msg->buf[0]; + wdata = msg->buf[0]; + + ctrl = bus->i2c_period | (1 << 12) | (1 << 2); + + if (msg->len > 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + else if (joined_rlen) + ctrl |= I2C_NOSTOP; + + cx_write(bus->reg_addr, addr); + cx_write(bus->reg_wdata, wdata); + cx_write(bus->reg_ctrl, ctrl); + + retval = i2c_wait_done(i2c_adap); + if (retval < 0) + goto err; + + if (retval == 0) + goto eio; + + if (i2c_debug) { + if (!(ctrl & I2C_NOSTOP)) + printk(" >\n"); + } + + for (cnt = 1; cnt < msg->len; cnt++) { + /* following bytes */ + wdata = msg->buf[cnt]; + ctrl = bus->i2c_period | (1 << 12) | (1 << 2); + + if (cnt < msg->len - 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + else if (joined_rlen) + ctrl |= I2C_NOSTOP; + + cx_write(bus->reg_addr, addr); + cx_write(bus->reg_wdata, wdata); + cx_write(bus->reg_ctrl, ctrl); + + retval = i2c_wait_done(i2c_adap); + if (retval < 0) + goto err; + + if (retval == 0) + goto eio; + + if (i2c_debug) { + dprintk(1, " %02x", msg->buf[cnt]); + if (!(ctrl & I2C_NOSTOP)) + dprintk(1, " >\n"); + } + } + + return msg->len; + +eio: + retval = -EIO; +err: + if (i2c_debug) + pr_err(" ERR: %d\n", retval); + return retval; +} + +static int i2c_readbytes(struct i2c_adapter *i2c_adap, + const struct i2c_msg *msg, int joined) +{ + struct cx25821_i2c *bus = i2c_adap->algo_data; + struct cx25821_dev *dev = bus->dev; + u32 ctrl, cnt; + int retval; + + if (i2c_debug && !joined) + dprintk(1, "6-%s(msg->len=%d)\n", __func__, msg->len); + + /* Deal with i2c probe functions with zero payload */ + if (msg->len == 0) { + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1); + if (!i2c_wait_done(i2c_adap)) + return -EIO; + if (!i2c_slave_did_ack(i2c_adap)) + return -EIO; + + dprintk(1, "%s(): returns 0\n", __func__); + return 0; + } + + if (i2c_debug) { + if (joined) + dprintk(1, " R"); + else + dprintk(1, " addr << 1) + 1); + } + + for (cnt = 0; cnt < msg->len; cnt++) { + + ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1; + + if (cnt < msg->len - 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, ctrl); + + retval = i2c_wait_done(i2c_adap); + if (retval < 0) + goto err; + if (retval == 0) + goto eio; + msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff; + + if (i2c_debug) { + dprintk(1, " %02x", msg->buf[cnt]); + if (!(ctrl & I2C_NOSTOP)) + dprintk(1, " >\n"); + } + } + + return msg->len; +eio: + retval = -EIO; +err: + if (i2c_debug) + pr_err(" ERR: %d\n", retval); + return retval; +} + +static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) +{ + struct cx25821_i2c *bus = i2c_adap->algo_data; + struct cx25821_dev *dev = bus->dev; + int i, retval = 0; + + dprintk(1, "%s(num = %d)\n", __func__, num); + + for (i = 0; i < num; i++) { + dprintk(1, "%s(num = %d) addr = 0x%02x len = 0x%x\n", + __func__, num, msgs[i].addr, msgs[i].len); + + if (msgs[i].flags & I2C_M_RD) { + /* read */ + retval = i2c_readbytes(i2c_adap, &msgs[i], 0); + } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* write then read from same address */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], + msgs[i + 1].len); + + if (retval < 0) + goto err; + i++; + retval = i2c_readbytes(i2c_adap, &msgs[i], 1); + } else { + /* write */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], 0); + } + + if (retval < 0) + goto err; + } + return num; + +err: + return retval; +} + + +static u32 cx25821_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_WRITE_WORD_DATA; +} + +static struct i2c_algorithm cx25821_i2c_algo_template = { + .master_xfer = i2c_xfer, + .functionality = cx25821_functionality, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif +}; + +static struct i2c_adapter cx25821_i2c_adap_template = { + .name = "cx25821", + .owner = THIS_MODULE, + .algo = &cx25821_i2c_algo_template, +}; + +static struct i2c_client cx25821_i2c_client_template = { + .name = "cx25821 internal", +}; + +/* init + register i2c adapter */ +int cx25821_i2c_register(struct cx25821_i2c *bus) +{ + struct cx25821_dev *dev = bus->dev; + + dprintk(1, "%s(bus = %d)\n", __func__, bus->nr); + + bus->i2c_adap = cx25821_i2c_adap_template; + bus->i2c_client = cx25821_i2c_client_template; + bus->i2c_adap.dev.parent = &dev->pci->dev; + + strlcpy(bus->i2c_adap.name, bus->dev->name, sizeof(bus->i2c_adap.name)); + + bus->i2c_adap.algo_data = bus; + i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev); + i2c_add_adapter(&bus->i2c_adap); + + bus->i2c_client.adapter = &bus->i2c_adap; + + /* set up the I2c */ + bus->i2c_client.addr = (0x88 >> 1); + + return bus->i2c_rc; +} + +int cx25821_i2c_unregister(struct cx25821_i2c *bus) +{ + i2c_del_adapter(&bus->i2c_adap); + return 0; +} + +#if 0 /* Currently unused */ +static void cx25821_av_clk(struct cx25821_dev *dev, int enable) +{ + /* write 0 to bus 2 addr 0x144 via i2x_xfer() */ + char buffer[3]; + struct i2c_msg msg; + dprintk(1, "%s(enabled = %d)\n", __func__, enable); + + /* Register 0x144 */ + buffer[0] = 0x01; + buffer[1] = 0x44; + if (enable == 1) + buffer[2] = 0x05; + else + buffer[2] = 0x00; + + msg.addr = 0x44; + msg.flags = I2C_M_TEN; + msg.len = 3; + msg.buf = buffer; + + i2c_xfer(&dev->i2c_bus[0].i2c_adap, &msg, 1); +} +#endif + +int cx25821_i2c_read(struct cx25821_i2c *bus, u16 reg_addr, int *value) +{ + struct i2c_client *client = &bus->i2c_client; + int v = 0; + u8 addr[2] = { 0, 0 }; + u8 buf[4] = { 0, 0, 0, 0 }; + + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 2, + .buf = addr, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + } + }; + + addr[0] = (reg_addr >> 8); + addr[1] = (reg_addr & 0xff); + msgs[0].addr = 0x44; + msgs[1].addr = 0x44; + + i2c_xfer(client->adapter, msgs, 2); + + v = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; + *value = v; + + return v; +} + +int cx25821_i2c_write(struct cx25821_i2c *bus, u16 reg_addr, int value) +{ + struct i2c_client *client = &bus->i2c_client; + int retval = 0; + u8 buf[6] = { 0, 0, 0, 0, 0, 0 }; + + struct i2c_msg msgs[1] = { + { + .addr = client->addr, + .flags = 0, + .len = 6, + .buf = buf, + } + }; + + buf[0] = reg_addr >> 8; + buf[1] = reg_addr & 0xff; + buf[5] = (value >> 24) & 0xff; + buf[4] = (value >> 16) & 0xff; + buf[3] = (value >> 8) & 0xff; + buf[2] = value & 0xff; + client->flags = 0; + msgs[0].addr = 0x44; + + retval = i2c_xfer(client->adapter, msgs, 1); + + return retval; +} diff --git a/drivers/media/pci/cx25821/cx25821-medusa-defines.h b/drivers/media/pci/cx25821/cx25821-medusa-defines.h new file mode 100644 index 00000000..7a9e6470 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-medusa-defines.h @@ -0,0 +1,42 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _MEDUSA_DEF_H_ +#define _MEDUSA_DEF_H_ + +/* Video decoder that we supported */ +#define VDEC_A 0 +#define VDEC_B 1 +#define VDEC_C 2 +#define VDEC_D 3 +#define VDEC_E 4 +#define VDEC_F 5 +#define VDEC_G 6 +#define VDEC_H 7 + +/* end of display sequence */ +#define END_OF_SEQ 0xF; + +/* registry string size */ +#define MAX_REGISTRY_SZ 40; + +#endif diff --git a/drivers/media/pci/cx25821/cx25821-medusa-reg.h b/drivers/media/pci/cx25821/cx25821-medusa-reg.h new file mode 100644 index 00000000..c98ac946 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-medusa-reg.h @@ -0,0 +1,455 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MEDUSA_REGISTERS__ +#define __MEDUSA_REGISTERS__ + +/* Serial Slave Registers */ +#define HOST_REGISTER1 0x0000 +#define HOST_REGISTER2 0x0001 + +/* Chip Configuration Registers */ +#define CHIP_CTRL 0x0100 +#define AFE_AB_CTRL 0x0104 +#define AFE_CD_CTRL 0x0108 +#define AFE_EF_CTRL 0x010C +#define AFE_GH_CTRL 0x0110 +#define DENC_AB_CTRL 0x0114 +#define BYP_AB_CTRL 0x0118 +#define MON_A_CTRL 0x011C +#define DISP_SEQ_A 0x0120 +#define DISP_SEQ_B 0x0124 +#define DISP_AB_CNT 0x0128 +#define DISP_CD_CNT 0x012C +#define DISP_EF_CNT 0x0130 +#define DISP_GH_CNT 0x0134 +#define DISP_IJ_CNT 0x0138 +#define PIN_OE_CTRL 0x013C +#define PIN_SPD_CTRL 0x0140 +#define PIN_SPD_CTRL2 0x0144 +#define IRQ_STAT_CTRL 0x0148 +#define POWER_CTRL_AB 0x014C +#define POWER_CTRL_CD 0x0150 +#define POWER_CTRL_EF 0x0154 +#define POWER_CTRL_GH 0x0158 +#define TUNE_CTRL 0x015C +#define BIAS_CTRL 0x0160 +#define AFE_AB_DIAG_CTRL 0x0164 +#define AFE_CD_DIAG_CTRL 0x0168 +#define AFE_EF_DIAG_CTRL 0x016C +#define AFE_GH_DIAG_CTRL 0x0170 +#define PLL_AB_DIAG_CTRL 0x0174 +#define PLL_CD_DIAG_CTRL 0x0178 +#define PLL_EF_DIAG_CTRL 0x017C +#define PLL_GH_DIAG_CTRL 0x0180 +#define TEST_CTRL 0x0184 +#define BIST_STAT 0x0188 +#define BIST_STAT2 0x018C +#define BIST_VID_PLL_AB_STAT 0x0190 +#define BIST_VID_PLL_CD_STAT 0x0194 +#define BIST_VID_PLL_EF_STAT 0x0198 +#define BIST_VID_PLL_GH_STAT 0x019C +#define DLL_DIAG_CTRL 0x01A0 +#define DEV_CH_ID_CTRL 0x01A4 +#define ABIST_CTRL_STATUS 0x01A8 +#define ABIST_FREQ 0x01AC +#define ABIST_GOERT_SHIFT 0x01B0 +#define ABIST_COEF12 0x01B4 +#define ABIST_COEF34 0x01B8 +#define ABIST_COEF56 0x01BC +#define ABIST_COEF7_SNR 0x01C0 +#define ABIST_ADC_CAL 0x01C4 +#define ABIST_BIN1_VGA0 0x01C8 +#define ABIST_BIN2_VGA1 0x01CC +#define ABIST_BIN3_VGA2 0x01D0 +#define ABIST_BIN4_VGA3 0x01D4 +#define ABIST_BIN5_VGA4 0x01D8 +#define ABIST_BIN6_VGA5 0x01DC +#define ABIST_BIN7_VGA6 0x0x1E0 +#define ABIST_CLAMP_A 0x0x1E4 +#define ABIST_CLAMP_B 0x0x1E8 +#define ABIST_CLAMP_C 0x01EC +#define ABIST_CLAMP_D 0x01F0 +#define ABIST_CLAMP_E 0x01F4 +#define ABIST_CLAMP_F 0x01F8 + +/* Digital Video Encoder A Registers */ +#define DENC_A_REG_1 0x0200 +#define DENC_A_REG_2 0x0204 +#define DENC_A_REG_3 0x0208 +#define DENC_A_REG_4 0x020C +#define DENC_A_REG_5 0x0210 +#define DENC_A_REG_6 0x0214 +#define DENC_A_REG_7 0x0218 +#define DENC_A_REG_8 0x021C + +/* Digital Video Encoder B Registers */ +#define DENC_B_REG_1 0x0300 +#define DENC_B_REG_2 0x0304 +#define DENC_B_REG_3 0x0308 +#define DENC_B_REG_4 0x030C +#define DENC_B_REG_5 0x0310 +#define DENC_B_REG_6 0x0314 +#define DENC_B_REG_7 0x0318 +#define DENC_B_REG_8 0x031C + +/* Video Decoder A Registers */ +#define MODE_CTRL 0x1000 +#define OUT_CTRL1 0x1004 +#define OUT_CTRL_NS 0x1008 +#define GEN_STAT 0x100C +#define INT_STAT_MASK 0x1010 +#define LUMA_CTRL 0x1014 +#define CHROMA_CTRL 0x1018 +#define CRUSH_CTRL 0x101C +#define HORIZ_TIM_CTRL 0x1020 +#define VERT_TIM_CTRL 0x1024 +#define MISC_TIM_CTRL 0x1028 +#define FIELD_COUNT 0x102C +#define HSCALE_CTRL 0x1030 +#define VSCALE_CTRL 0x1034 +#define MAN_VGA_CTRL 0x1038 +#define MAN_AGC_CTRL 0x103C +#define DFE_CTRL1 0x1040 +#define DFE_CTRL2 0x1044 +#define DFE_CTRL3 0x1048 +#define PLL_CTRL 0x104C +#define PLL_CTRL_FAST 0x1050 +#define HTL_CTRL 0x1054 +#define SRC_CFG 0x1058 +#define SC_STEP_SIZE 0x105C +#define SC_CONVERGE_CTRL 0x1060 +#define SC_LOOP_CTRL 0x1064 +#define COMB_2D_HFS_CFG 0x1068 +#define COMB_2D_HFD_CFG 0x106C +#define COMB_2D_LF_CFG 0x1070 +#define COMB_2D_BLEND 0x1074 +#define COMB_MISC_CTRL 0x1078 +#define COMB_FLAT_THRESH_CTRL 0x107C +#define COMB_TEST 0x1080 +#define BP_MISC_CTRL 0x1084 +#define VCR_DET_CTRL 0x1088 +#define NOISE_DET_CTRL 0x108C +#define COMB_FLAT_NOISE_CTRL 0x1090 +#define VERSION 0x11F8 +#define SOFT_RST_CTRL 0x11FC + +/* Video Decoder B Registers */ +#define VDEC_B_MODE_CTRL 0x1200 +#define VDEC_B_OUT_CTRL1 0x1204 +#define VDEC_B_OUT_CTRL_NS 0x1208 +#define VDEC_B_GEN_STAT 0x120C +#define VDEC_B_INT_STAT_MASK 0x1210 +#define VDEC_B_LUMA_CTRL 0x1214 +#define VDEC_B_CHROMA_CTRL 0x1218 +#define VDEC_B_CRUSH_CTRL 0x121C +#define VDEC_B_HORIZ_TIM_CTRL 0x1220 +#define VDEC_B_VERT_TIM_CTRL 0x1224 +#define VDEC_B_MISC_TIM_CTRL 0x1228 +#define VDEC_B_FIELD_COUNT 0x122C +#define VDEC_B_HSCALE_CTRL 0x1230 +#define VDEC_B_VSCALE_CTRL 0x1234 +#define VDEC_B_MAN_VGA_CTRL 0x1238 +#define VDEC_B_MAN_AGC_CTRL 0x123C +#define VDEC_B_DFE_CTRL1 0x1240 +#define VDEC_B_DFE_CTRL2 0x1244 +#define VDEC_B_DFE_CTRL3 0x1248 +#define VDEC_B_PLL_CTRL 0x124C +#define VDEC_B_PLL_CTRL_FAST 0x1250 +#define VDEC_B_HTL_CTRL 0x1254 +#define VDEC_B_SRC_CFG 0x1258 +#define VDEC_B_SC_STEP_SIZE 0x125C +#define VDEC_B_SC_CONVERGE_CTRL 0x1260 +#define VDEC_B_SC_LOOP_CTRL 0x1264 +#define VDEC_B_COMB_2D_HFS_CFG 0x1268 +#define VDEC_B_COMB_2D_HFD_CFG 0x126C +#define VDEC_B_COMB_2D_LF_CFG 0x1270 +#define VDEC_B_COMB_2D_BLEND 0x1274 +#define VDEC_B_COMB_MISC_CTRL 0x1278 +#define VDEC_B_COMB_FLAT_THRESH_CTRL 0x127C +#define VDEC_B_COMB_TEST 0x1280 +#define VDEC_B_BP_MISC_CTRL 0x1284 +#define VDEC_B_VCR_DET_CTRL 0x1288 +#define VDEC_B_NOISE_DET_CTRL 0x128C +#define VDEC_B_COMB_FLAT_NOISE_CTRL 0x1290 +#define VDEC_B_VERSION 0x13F8 +#define VDEC_B_SOFT_RST_CTRL 0x13FC + +/* Video Decoder C Registers */ +#define VDEC_C_MODE_CTRL 0x1400 +#define VDEC_C_OUT_CTRL1 0x1404 +#define VDEC_C_OUT_CTRL_NS 0x1408 +#define VDEC_C_GEN_STAT 0x140C +#define VDEC_C_INT_STAT_MASK 0x1410 +#define VDEC_C_LUMA_CTRL 0x1414 +#define VDEC_C_CHROMA_CTRL 0x1418 +#define VDEC_C_CRUSH_CTRL 0x141C +#define VDEC_C_HORIZ_TIM_CTRL 0x1420 +#define VDEC_C_VERT_TIM_CTRL 0x1424 +#define VDEC_C_MISC_TIM_CTRL 0x1428 +#define VDEC_C_FIELD_COUNT 0x142C +#define VDEC_C_HSCALE_CTRL 0x1430 +#define VDEC_C_VSCALE_CTRL 0x1434 +#define VDEC_C_MAN_VGA_CTRL 0x1438 +#define VDEC_C_MAN_AGC_CTRL 0x143C +#define VDEC_C_DFE_CTRL1 0x1440 +#define VDEC_C_DFE_CTRL2 0x1444 +#define VDEC_C_DFE_CTRL3 0x1448 +#define VDEC_C_PLL_CTRL 0x144C +#define VDEC_C_PLL_CTRL_FAST 0x1450 +#define VDEC_C_HTL_CTRL 0x1454 +#define VDEC_C_SRC_CFG 0x1458 +#define VDEC_C_SC_STEP_SIZE 0x145C +#define VDEC_C_SC_CONVERGE_CTRL 0x1460 +#define VDEC_C_SC_LOOP_CTRL 0x1464 +#define VDEC_C_COMB_2D_HFS_CFG 0x1468 +#define VDEC_C_COMB_2D_HFD_CFG 0x146C +#define VDEC_C_COMB_2D_LF_CFG 0x1470 +#define VDEC_C_COMB_2D_BLEND 0x1474 +#define VDEC_C_COMB_MISC_CTRL 0x1478 +#define VDEC_C_COMB_FLAT_THRESH_CTRL 0x147C +#define VDEC_C_COMB_TEST 0x1480 +#define VDEC_C_BP_MISC_CTRL 0x1484 +#define VDEC_C_VCR_DET_CTRL 0x1488 +#define VDEC_C_NOISE_DET_CTRL 0x148C +#define VDEC_C_COMB_FLAT_NOISE_CTRL 0x1490 +#define VDEC_C_VERSION 0x15F8 +#define VDEC_C_SOFT_RST_CTRL 0x15FC + +/* Video Decoder D Registers */ +#define VDEC_D_MODE_CTRL 0x1600 +#define VDEC_D_OUT_CTRL1 0x1604 +#define VDEC_D_OUT_CTRL_NS 0x1608 +#define VDEC_D_GEN_STAT 0x160C +#define VDEC_D_INT_STAT_MASK 0x1610 +#define VDEC_D_LUMA_CTRL 0x1614 +#define VDEC_D_CHROMA_CTRL 0x1618 +#define VDEC_D_CRUSH_CTRL 0x161C +#define VDEC_D_HORIZ_TIM_CTRL 0x1620 +#define VDEC_D_VERT_TIM_CTRL 0x1624 +#define VDEC_D_MISC_TIM_CTRL 0x1628 +#define VDEC_D_FIELD_COUNT 0x162C +#define VDEC_D_HSCALE_CTRL 0x1630 +#define VDEC_D_VSCALE_CTRL 0x1634 +#define VDEC_D_MAN_VGA_CTRL 0x1638 +#define VDEC_D_MAN_AGC_CTRL 0x163C +#define VDEC_D_DFE_CTRL1 0x1640 +#define VDEC_D_DFE_CTRL2 0x1644 +#define VDEC_D_DFE_CTRL3 0x1648 +#define VDEC_D_PLL_CTRL 0x164C +#define VDEC_D_PLL_CTRL_FAST 0x1650 +#define VDEC_D_HTL_CTRL 0x1654 +#define VDEC_D_SRC_CFG 0x1658 +#define VDEC_D_SC_STEP_SIZE 0x165C +#define VDEC_D_SC_CONVERGE_CTRL 0x1660 +#define VDEC_D_SC_LOOP_CTRL 0x1664 +#define VDEC_D_COMB_2D_HFS_CFG 0x1668 +#define VDEC_D_COMB_2D_HFD_CFG 0x166C +#define VDEC_D_COMB_2D_LF_CFG 0x1670 +#define VDEC_D_COMB_2D_BLEND 0x1674 +#define VDEC_D_COMB_MISC_CTRL 0x1678 +#define VDEC_D_COMB_FLAT_THRESH_CTRL 0x167C +#define VDEC_D_COMB_TEST 0x1680 +#define VDEC_D_BP_MISC_CTRL 0x1684 +#define VDEC_D_VCR_DET_CTRL 0x1688 +#define VDEC_D_NOISE_DET_CTRL 0x168C +#define VDEC_D_COMB_FLAT_NOISE_CTRL 0x1690 +#define VDEC_D_VERSION 0x17F8 +#define VDEC_D_SOFT_RST_CTRL 0x17FC + +/* Video Decoder E Registers */ +#define VDEC_E_MODE_CTRL 0x1800 +#define VDEC_E_OUT_CTRL1 0x1804 +#define VDEC_E_OUT_CTRL_NS 0x1808 +#define VDEC_E_GEN_STAT 0x180C +#define VDEC_E_INT_STAT_MASK 0x1810 +#define VDEC_E_LUMA_CTRL 0x1814 +#define VDEC_E_CHROMA_CTRL 0x1818 +#define VDEC_E_CRUSH_CTRL 0x181C +#define VDEC_E_HORIZ_TIM_CTRL 0x1820 +#define VDEC_E_VERT_TIM_CTRL 0x1824 +#define VDEC_E_MISC_TIM_CTRL 0x1828 +#define VDEC_E_FIELD_COUNT 0x182C +#define VDEC_E_HSCALE_CTRL 0x1830 +#define VDEC_E_VSCALE_CTRL 0x1834 +#define VDEC_E_MAN_VGA_CTRL 0x1838 +#define VDEC_E_MAN_AGC_CTRL 0x183C +#define VDEC_E_DFE_CTRL1 0x1840 +#define VDEC_E_DFE_CTRL2 0x1844 +#define VDEC_E_DFE_CTRL3 0x1848 +#define VDEC_E_PLL_CTRL 0x184C +#define VDEC_E_PLL_CTRL_FAST 0x1850 +#define VDEC_E_HTL_CTRL 0x1854 +#define VDEC_E_SRC_CFG 0x1858 +#define VDEC_E_SC_STEP_SIZE 0x185C +#define VDEC_E_SC_CONVERGE_CTRL 0x1860 +#define VDEC_E_SC_LOOP_CTRL 0x1864 +#define VDEC_E_COMB_2D_HFS_CFG 0x1868 +#define VDEC_E_COMB_2D_HFD_CFG 0x186C +#define VDEC_E_COMB_2D_LF_CFG 0x1870 +#define VDEC_E_COMB_2D_BLEND 0x1874 +#define VDEC_E_COMB_MISC_CTRL 0x1878 +#define VDEC_E_COMB_FLAT_THRESH_CTRL 0x187C +#define VDEC_E_COMB_TEST 0x1880 +#define VDEC_E_BP_MISC_CTRL 0x1884 +#define VDEC_E_VCR_DET_CTRL 0x1888 +#define VDEC_E_NOISE_DET_CTRL 0x188C +#define VDEC_E_COMB_FLAT_NOISE_CTRL 0x1890 +#define VDEC_E_VERSION 0x19F8 +#define VDEC_E_SOFT_RST_CTRL 0x19FC + +/* Video Decoder F Registers */ +#define VDEC_F_MODE_CTRL 0x1A00 +#define VDEC_F_OUT_CTRL1 0x1A04 +#define VDEC_F_OUT_CTRL_NS 0x1A08 +#define VDEC_F_GEN_STAT 0x1A0C +#define VDEC_F_INT_STAT_MASK 0x1A10 +#define VDEC_F_LUMA_CTRL 0x1A14 +#define VDEC_F_CHROMA_CTRL 0x1A18 +#define VDEC_F_CRUSH_CTRL 0x1A1C +#define VDEC_F_HORIZ_TIM_CTRL 0x1A20 +#define VDEC_F_VERT_TIM_CTRL 0x1A24 +#define VDEC_F_MISC_TIM_CTRL 0x1A28 +#define VDEC_F_FIELD_COUNT 0x1A2C +#define VDEC_F_HSCALE_CTRL 0x1A30 +#define VDEC_F_VSCALE_CTRL 0x1A34 +#define VDEC_F_MAN_VGA_CTRL 0x1A38 +#define VDEC_F_MAN_AGC_CTRL 0x1A3C +#define VDEC_F_DFE_CTRL1 0x1A40 +#define VDEC_F_DFE_CTRL2 0x1A44 +#define VDEC_F_DFE_CTRL3 0x1A48 +#define VDEC_F_PLL_CTRL 0x1A4C +#define VDEC_F_PLL_CTRL_FAST 0x1A50 +#define VDEC_F_HTL_CTRL 0x1A54 +#define VDEC_F_SRC_CFG 0x1A58 +#define VDEC_F_SC_STEP_SIZE 0x1A5C +#define VDEC_F_SC_CONVERGE_CTRL 0x1A60 +#define VDEC_F_SC_LOOP_CTRL 0x1A64 +#define VDEC_F_COMB_2D_HFS_CFG 0x1A68 +#define VDEC_F_COMB_2D_HFD_CFG 0x1A6C +#define VDEC_F_COMB_2D_LF_CFG 0x1A70 +#define VDEC_F_COMB_2D_BLEND 0x1A74 +#define VDEC_F_COMB_MISC_CTRL 0x1A78 +#define VDEC_F_COMB_FLAT_THRESH_CTRL 0x1A7C +#define VDEC_F_COMB_TEST 0x1A80 +#define VDEC_F_BP_MISC_CTRL 0x1A84 +#define VDEC_F_VCR_DET_CTRL 0x1A88 +#define VDEC_F_NOISE_DET_CTRL 0x1A8C +#define VDEC_F_COMB_FLAT_NOISE_CTRL 0x1A90 +#define VDEC_F_VERSION 0x1BF8 +#define VDEC_F_SOFT_RST_CTRL 0x1BFC + +/* Video Decoder G Registers */ +#define VDEC_G_MODE_CTRL 0x1C00 +#define VDEC_G_OUT_CTRL1 0x1C04 +#define VDEC_G_OUT_CTRL_NS 0x1C08 +#define VDEC_G_GEN_STAT 0x1C0C +#define VDEC_G_INT_STAT_MASK 0x1C10 +#define VDEC_G_LUMA_CTRL 0x1C14 +#define VDEC_G_CHROMA_CTRL 0x1C18 +#define VDEC_G_CRUSH_CTRL 0x1C1C +#define VDEC_G_HORIZ_TIM_CTRL 0x1C20 +#define VDEC_G_VERT_TIM_CTRL 0x1C24 +#define VDEC_G_MISC_TIM_CTRL 0x1C28 +#define VDEC_G_FIELD_COUNT 0x1C2C +#define VDEC_G_HSCALE_CTRL 0x1C30 +#define VDEC_G_VSCALE_CTRL 0x1C34 +#define VDEC_G_MAN_VGA_CTRL 0x1C38 +#define VDEC_G_MAN_AGC_CTRL 0x1C3C +#define VDEC_G_DFE_CTRL1 0x1C40 +#define VDEC_G_DFE_CTRL2 0x1C44 +#define VDEC_G_DFE_CTRL3 0x1C48 +#define VDEC_G_PLL_CTRL 0x1C4C +#define VDEC_G_PLL_CTRL_FAST 0x1C50 +#define VDEC_G_HTL_CTRL 0x1C54 +#define VDEC_G_SRC_CFG 0x1C58 +#define VDEC_G_SC_STEP_SIZE 0x1C5C +#define VDEC_G_SC_CONVERGE_CTRL 0x1C60 +#define VDEC_G_SC_LOOP_CTRL 0x1C64 +#define VDEC_G_COMB_2D_HFS_CFG 0x1C68 +#define VDEC_G_COMB_2D_HFD_CFG 0x1C6C +#define VDEC_G_COMB_2D_LF_CFG 0x1C70 +#define VDEC_G_COMB_2D_BLEND 0x1C74 +#define VDEC_G_COMB_MISC_CTRL 0x1C78 +#define VDEC_G_COMB_FLAT_THRESH_CTRL 0x1C7C +#define VDEC_G_COMB_TEST 0x1C80 +#define VDEC_G_BP_MISC_CTRL 0x1C84 +#define VDEC_G_VCR_DET_CTRL 0x1C88 +#define VDEC_G_NOISE_DET_CTRL 0x1C8C +#define VDEC_G_COMB_FLAT_NOISE_CTRL 0x1C90 +#define VDEC_G_VERSION 0x1DF8 +#define VDEC_G_SOFT_RST_CTRL 0x1DFC + +/* Video Decoder H Registers */ +#define VDEC_H_MODE_CTRL 0x1E00 +#define VDEC_H_OUT_CTRL1 0x1E04 +#define VDEC_H_OUT_CTRL_NS 0x1E08 +#define VDEC_H_GEN_STAT 0x1E0C +#define VDEC_H_INT_STAT_MASK 0x1E1E +#define VDEC_H_LUMA_CTRL 0x1E14 +#define VDEC_H_CHROMA_CTRL 0x1E18 +#define VDEC_H_CRUSH_CTRL 0x1E1C +#define VDEC_H_HORIZ_TIM_CTRL 0x1E20 +#define VDEC_H_VERT_TIM_CTRL 0x1E24 +#define VDEC_H_MISC_TIM_CTRL 0x1E28 +#define VDEC_H_FIELD_COUNT 0x1E2C +#define VDEC_H_HSCALE_CTRL 0x1E30 +#define VDEC_H_VSCALE_CTRL 0x1E34 +#define VDEC_H_MAN_VGA_CTRL 0x1E38 +#define VDEC_H_MAN_AGC_CTRL 0x1E3C +#define VDEC_H_DFE_CTRL1 0x1E40 +#define VDEC_H_DFE_CTRL2 0x1E44 +#define VDEC_H_DFE_CTRL3 0x1E48 +#define VDEC_H_PLL_CTRL 0x1E4C +#define VDEC_H_PLL_CTRL_FAST 0x1E50 +#define VDEC_H_HTL_CTRL 0x1E54 +#define VDEC_H_SRC_CFG 0x1E58 +#define VDEC_H_SC_STEP_SIZE 0x1E5C +#define VDEC_H_SC_CONVERGE_CTRL 0x1E60 +#define VDEC_H_SC_LOOP_CTRL 0x1E64 +#define VDEC_H_COMB_2D_HFS_CFG 0x1E68 +#define VDEC_H_COMB_2D_HFD_CFG 0x1E6C +#define VDEC_H_COMB_2D_LF_CFG 0x1E70 +#define VDEC_H_COMB_2D_BLEND 0x1E74 +#define VDEC_H_COMB_MISC_CTRL 0x1E78 +#define VDEC_H_COMB_FLAT_THRESH_CTRL 0x1E7C +#define VDEC_H_COMB_TEST 0x1E80 +#define VDEC_H_BP_MISC_CTRL 0x1E84 +#define VDEC_H_VCR_DET_CTRL 0x1E88 +#define VDEC_H_NOISE_DET_CTRL 0x1E8C +#define VDEC_H_COMB_FLAT_NOISE_CTRL 0x1E90 +#define VDEC_H_VERSION 0x1FF8 +#define VDEC_H_SOFT_RST_CTRL 0x1FFC + +/*****************************************************************************/ +/* LUMA_CTRL register fields */ +#define VDEC_A_BRITE_CTRL 0x1014 +#define VDEC_A_CNTRST_CTRL 0x1015 +#define VDEC_A_PEAK_SEL 0x1016 + +/*****************************************************************************/ +/* CHROMA_CTRL register fields */ +#define VDEC_A_USAT_CTRL 0x1018 +#define VDEC_A_VSAT_CTRL 0x1019 +#define VDEC_A_HUE_CTRL 0x101A + +#endif diff --git a/drivers/media/pci/cx25821/cx25821-medusa-video.c b/drivers/media/pci/cx25821/cx25821-medusa-video.c new file mode 100644 index 00000000..22fa0441 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-medusa-video.c @@ -0,0 +1,743 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "cx25821.h" +#include "cx25821-medusa-video.h" +#include "cx25821-biffuncs.h" + +/* + * medusa_enable_bluefield_output() + * + * Enable the generation of blue filed output if no video + * + */ +static void medusa_enable_bluefield_output(struct cx25821_dev *dev, int channel, + int enable) +{ + u32 value = 0; + u32 tmp = 0; + int out_ctrl = OUT_CTRL1; + int out_ctrl_ns = OUT_CTRL_NS; + + switch (channel) { + default: + case VDEC_A: + break; + case VDEC_B: + out_ctrl = VDEC_B_OUT_CTRL1; + out_ctrl_ns = VDEC_B_OUT_CTRL_NS; + break; + case VDEC_C: + out_ctrl = VDEC_C_OUT_CTRL1; + out_ctrl_ns = VDEC_C_OUT_CTRL_NS; + break; + case VDEC_D: + out_ctrl = VDEC_D_OUT_CTRL1; + out_ctrl_ns = VDEC_D_OUT_CTRL_NS; + break; + case VDEC_E: + out_ctrl = VDEC_E_OUT_CTRL1; + out_ctrl_ns = VDEC_E_OUT_CTRL_NS; + return; + case VDEC_F: + out_ctrl = VDEC_F_OUT_CTRL1; + out_ctrl_ns = VDEC_F_OUT_CTRL_NS; + return; + case VDEC_G: + out_ctrl = VDEC_G_OUT_CTRL1; + out_ctrl_ns = VDEC_G_OUT_CTRL_NS; + return; + case VDEC_H: + out_ctrl = VDEC_H_OUT_CTRL1; + out_ctrl_ns = VDEC_H_OUT_CTRL_NS; + return; + } + + value = cx25821_i2c_read(&dev->i2c_bus[0], out_ctrl, &tmp); + value &= 0xFFFFFF7F; /* clear BLUE_FIELD_EN */ + if (enable) + value |= 0x00000080; /* set BLUE_FIELD_EN */ + cx25821_i2c_write(&dev->i2c_bus[0], out_ctrl, value); + + value = cx25821_i2c_read(&dev->i2c_bus[0], out_ctrl_ns, &tmp); + value &= 0xFFFFFF7F; + if (enable) + value |= 0x00000080; /* set BLUE_FIELD_EN */ + cx25821_i2c_write(&dev->i2c_bus[0], out_ctrl_ns, value); +} + +static int medusa_initialize_ntsc(struct cx25821_dev *dev) +{ + int ret_val = 0; + int i = 0; + u32 value = 0; + u32 tmp = 0; + + for (i = 0; i < MAX_DECODERS; i++) { + /* set video format NTSC-M */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + MODE_CTRL + (0x200 * i), &tmp); + value &= 0xFFFFFFF0; + /* enable the fast locking mode bit[16] */ + value |= 0x10001; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + MODE_CTRL + (0x200 * i), value); + + /* resolution NTSC 720x480 */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + HORIZ_TIM_CTRL + (0x200 * i), &tmp); + value &= 0x00C00C00; + value |= 0x612D0074; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + HORIZ_TIM_CTRL + (0x200 * i), value); + + value = cx25821_i2c_read(&dev->i2c_bus[0], + VERT_TIM_CTRL + (0x200 * i), &tmp); + value &= 0x00C00C00; + value |= 0x1C1E001A; /* vblank_cnt + 2 to get camera ID */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + VERT_TIM_CTRL + (0x200 * i), value); + + /* chroma subcarrier step size */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + SC_STEP_SIZE + (0x200 * i), 0x43E00000); + + /* enable VIP optional active */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + OUT_CTRL_NS + (0x200 * i), &tmp); + value &= 0xFFFBFFFF; + value |= 0x00040000; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + OUT_CTRL_NS + (0x200 * i), value); + + /* enable VIP optional active (VIP_OPT_AL) for direct output. */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + OUT_CTRL1 + (0x200 * i), &tmp); + value &= 0xFFFBFFFF; + value |= 0x00040000; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + OUT_CTRL1 + (0x200 * i), value); + + /* + * clear VPRES_VERT_EN bit, fixes the chroma run away problem + * when the input switching rate < 16 fields + */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + MISC_TIM_CTRL + (0x200 * i), &tmp); + /* disable special play detection */ + value = setBitAtPos(value, 14); + value = clearBitAtPos(value, 15); + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + MISC_TIM_CTRL + (0x200 * i), value); + + /* set vbi_gate_en to 0 */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DFE_CTRL1 + (0x200 * i), &tmp); + value = clearBitAtPos(value, 29); + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DFE_CTRL1 + (0x200 * i), value); + + /* Enable the generation of blue field output if no video */ + medusa_enable_bluefield_output(dev, i, 1); + } + + for (i = 0; i < MAX_ENCODERS; i++) { + /* NTSC hclock */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_1 + (0x100 * i), &tmp); + value &= 0xF000FC00; + value |= 0x06B402D0; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_1 + (0x100 * i), value); + + /* burst begin and burst end */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_2 + (0x100 * i), &tmp); + value &= 0xFF000000; + value |= 0x007E9054; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_2 + (0x100 * i), value); + + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_3 + (0x100 * i), &tmp); + value &= 0xFC00FE00; + value |= 0x00EC00F0; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_3 + (0x100 * i), value); + + /* set NTSC vblank, no phase alternation, 7.5 IRE pedestal */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_4 + (0x100 * i), &tmp); + value &= 0x00FCFFFF; + value |= 0x13020000; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_4 + (0x100 * i), value); + + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_5 + (0x100 * i), &tmp); + value &= 0xFFFF0000; + value |= 0x0000E575; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_5 + (0x100 * i), value); + + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_6 + (0x100 * i), 0x009A89C1); + + /* Subcarrier Increment */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_7 + (0x100 * i), 0x21F07C1F); + } + + /* set picture resolutions */ + /* 0 - 720 */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], HSCALE_CTRL, 0x0); + /* 0 - 480 */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], VSCALE_CTRL, 0x0); + + /* set Bypass input format to NTSC 525 lines */ + value = cx25821_i2c_read(&dev->i2c_bus[0], BYP_AB_CTRL, &tmp); + value |= 0x00080200; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], BYP_AB_CTRL, value); + + return ret_val; +} + +static int medusa_PALCombInit(struct cx25821_dev *dev, int dec) +{ + int ret_val = -1; + u32 value = 0, tmp = 0; + + /* Setup for 2D threshold */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + COMB_2D_HFS_CFG + (0x200 * dec), 0x20002861); + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + COMB_2D_HFD_CFG + (0x200 * dec), 0x20002861); + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + COMB_2D_LF_CFG + (0x200 * dec), 0x200A1023); + + /* Setup flat chroma and luma thresholds */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + COMB_FLAT_THRESH_CTRL + (0x200 * dec), &tmp); + value &= 0x06230000; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + COMB_FLAT_THRESH_CTRL + (0x200 * dec), value); + + /* set comb 2D blend */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + COMB_2D_BLEND + (0x200 * dec), 0x210F0F0F); + + /* COMB MISC CONTROL */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + COMB_MISC_CTRL + (0x200 * dec), 0x41120A7F); + + return ret_val; +} + +static int medusa_initialize_pal(struct cx25821_dev *dev) +{ + int ret_val = 0; + int i = 0; + u32 value = 0; + u32 tmp = 0; + + for (i = 0; i < MAX_DECODERS; i++) { + /* set video format PAL-BDGHI */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + MODE_CTRL + (0x200 * i), &tmp); + value &= 0xFFFFFFF0; + /* enable the fast locking mode bit[16] */ + value |= 0x10004; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + MODE_CTRL + (0x200 * i), value); + + /* resolution PAL 720x576 */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + HORIZ_TIM_CTRL + (0x200 * i), &tmp); + value &= 0x00C00C00; + value |= 0x632D007D; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + HORIZ_TIM_CTRL + (0x200 * i), value); + + /* vblank656_cnt=x26, vactive_cnt=240h, vblank_cnt=x24 */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + VERT_TIM_CTRL + (0x200 * i), &tmp); + value &= 0x00C00C00; + value |= 0x28240026; /* vblank_cnt + 2 to get camera ID */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + VERT_TIM_CTRL + (0x200 * i), value); + + /* chroma subcarrier step size */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + SC_STEP_SIZE + (0x200 * i), 0x5411E2D0); + + /* enable VIP optional active */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + OUT_CTRL_NS + (0x200 * i), &tmp); + value &= 0xFFFBFFFF; + value |= 0x00040000; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + OUT_CTRL_NS + (0x200 * i), value); + + /* enable VIP optional active (VIP_OPT_AL) for direct output. */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + OUT_CTRL1 + (0x200 * i), &tmp); + value &= 0xFFFBFFFF; + value |= 0x00040000; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + OUT_CTRL1 + (0x200 * i), value); + + /* + * clear VPRES_VERT_EN bit, fixes the chroma run away problem + * when the input switching rate < 16 fields + */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + MISC_TIM_CTRL + (0x200 * i), &tmp); + /* disable special play detection */ + value = setBitAtPos(value, 14); + value = clearBitAtPos(value, 15); + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + MISC_TIM_CTRL + (0x200 * i), value); + + /* set vbi_gate_en to 0 */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DFE_CTRL1 + (0x200 * i), &tmp); + value = clearBitAtPos(value, 29); + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DFE_CTRL1 + (0x200 * i), value); + + medusa_PALCombInit(dev, i); + + /* Enable the generation of blue field output if no video */ + medusa_enable_bluefield_output(dev, i, 1); + } + + for (i = 0; i < MAX_ENCODERS; i++) { + /* PAL hclock */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_1 + (0x100 * i), &tmp); + value &= 0xF000FC00; + value |= 0x06C002D0; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_1 + (0x100 * i), value); + + /* burst begin and burst end */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_2 + (0x100 * i), &tmp); + value &= 0xFF000000; + value |= 0x007E9754; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_2 + (0x100 * i), value); + + /* hblank and vactive */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_3 + (0x100 * i), &tmp); + value &= 0xFC00FE00; + value |= 0x00FC0120; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_3 + (0x100 * i), value); + + /* set PAL vblank, phase alternation, 0 IRE pedestal */ + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_4 + (0x100 * i), &tmp); + value &= 0x00FCFFFF; + value |= 0x14010000; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_4 + (0x100 * i), value); + + value = cx25821_i2c_read(&dev->i2c_bus[0], + DENC_A_REG_5 + (0x100 * i), &tmp); + value &= 0xFFFF0000; + value |= 0x0000F078; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_5 + (0x100 * i), value); + + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_6 + (0x100 * i), 0x00A493CF); + + /* Subcarrier Increment */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], + DENC_A_REG_7 + (0x100 * i), 0x2A098ACB); + } + + /* set picture resolutions */ + /* 0 - 720 */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], HSCALE_CTRL, 0x0); + /* 0 - 576 */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], VSCALE_CTRL, 0x0); + + /* set Bypass input format to PAL 625 lines */ + value = cx25821_i2c_read(&dev->i2c_bus[0], BYP_AB_CTRL, &tmp); + value &= 0xFFF7FDFF; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], BYP_AB_CTRL, value); + + return ret_val; +} + +int medusa_set_videostandard(struct cx25821_dev *dev) +{ + int status = 0; + u32 value = 0, tmp = 0; + + if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK) + status = medusa_initialize_pal(dev); + else + status = medusa_initialize_ntsc(dev); + + /* Enable DENC_A output */ + value = cx25821_i2c_read(&dev->i2c_bus[0], DENC_A_REG_4, &tmp); + value = setBitAtPos(value, 4); + status = cx25821_i2c_write(&dev->i2c_bus[0], DENC_A_REG_4, value); + + /* Enable DENC_B output */ + value = cx25821_i2c_read(&dev->i2c_bus[0], DENC_B_REG_4, &tmp); + value = setBitAtPos(value, 4); + status = cx25821_i2c_write(&dev->i2c_bus[0], DENC_B_REG_4, value); + + return status; +} + +void medusa_set_resolution(struct cx25821_dev *dev, int width, + int decoder_select) +{ + int decoder = 0; + int decoder_count = 0; + u32 hscale = 0x0; + u32 vscale = 0x0; + const int MAX_WIDTH = 720; + + /* validate the width */ + if (width > MAX_WIDTH) { + pr_info("%s(): width %d > MAX_WIDTH %d ! resetting to MAX_WIDTH\n", + __func__, width, MAX_WIDTH); + width = MAX_WIDTH; + } + + if (decoder_select <= 7 && decoder_select >= 0) { + decoder = decoder_select; + decoder_count = decoder_select + 1; + } else { + decoder = 0; + decoder_count = _num_decoders; + } + + switch (width) { + case 320: + hscale = 0x13E34B; + vscale = 0x0; + break; + + case 352: + hscale = 0x10A273; + vscale = 0x0; + break; + + case 176: + hscale = 0x3115B2; + vscale = 0x1E00; + break; + + case 160: + hscale = 0x378D84; + vscale = 0x1E00; + break; + + default: /* 720 */ + hscale = 0x0; + vscale = 0x0; + break; + } + + for (; decoder < decoder_count; decoder++) { + /* write scaling values for each decoder */ + cx25821_i2c_write(&dev->i2c_bus[0], + HSCALE_CTRL + (0x200 * decoder), hscale); + cx25821_i2c_write(&dev->i2c_bus[0], + VSCALE_CTRL + (0x200 * decoder), vscale); + } +} + +static void medusa_set_decoderduration(struct cx25821_dev *dev, int decoder, + int duration) +{ + u32 fld_cnt = 0; + u32 tmp = 0; + u32 disp_cnt_reg = DISP_AB_CNT; + + /* no support */ + if (decoder < VDEC_A || decoder > VDEC_H) { + return; + } + + switch (decoder) { + default: + break; + case VDEC_C: + case VDEC_D: + disp_cnt_reg = DISP_CD_CNT; + break; + case VDEC_E: + case VDEC_F: + disp_cnt_reg = DISP_EF_CNT; + break; + case VDEC_G: + case VDEC_H: + disp_cnt_reg = DISP_GH_CNT; + break; + } + + _display_field_cnt[decoder] = duration; + + /* update hardware */ + fld_cnt = cx25821_i2c_read(&dev->i2c_bus[0], disp_cnt_reg, &tmp); + + if (!(decoder % 2)) { /* EVEN decoder */ + fld_cnt &= 0xFFFF0000; + fld_cnt |= duration; + } else { + fld_cnt &= 0x0000FFFF; + fld_cnt |= ((u32) duration) << 16; + } + + cx25821_i2c_write(&dev->i2c_bus[0], disp_cnt_reg, fld_cnt); +} + +/* Map to Medusa register setting */ +static int mapM(int srcMin, int srcMax, int srcVal, int dstMin, int dstMax, + int *dstVal) +{ + int numerator; + int denominator; + int quotient; + + if ((srcMin == srcMax) || (srcVal < srcMin) || (srcVal > srcMax)) + return -1; + /* + * This is the overall expression used: + * *dstVal = + * (srcVal - srcMin)*(dstMax - dstMin) / (srcMax - srcMin) + dstMin; + * but we need to account for rounding so below we use the modulus + * operator to find the remainder and increment if necessary. + */ + numerator = (srcVal - srcMin) * (dstMax - dstMin); + denominator = srcMax - srcMin; + quotient = numerator / denominator; + + if (2 * (numerator % denominator) >= denominator) + quotient++; + + *dstVal = quotient + dstMin; + + return 0; +} + +static unsigned long convert_to_twos(long numeric, unsigned long bits_len) +{ + unsigned char temp; + + if (numeric >= 0) + return numeric; + else { + temp = ~(abs(numeric) & 0xFF); + temp += 1; + return temp; + } +} + +int medusa_set_brightness(struct cx25821_dev *dev, int brightness, int decoder) +{ + int ret_val = 0; + int value = 0; + u32 val = 0, tmp = 0; + + if ((brightness > VIDEO_PROCAMP_MAX) || + (brightness < VIDEO_PROCAMP_MIN)) { + return -1; + } + ret_val = mapM(VIDEO_PROCAMP_MIN, VIDEO_PROCAMP_MAX, brightness, + SIGNED_BYTE_MIN, SIGNED_BYTE_MAX, &value); + value = convert_to_twos(value, 8); + val = cx25821_i2c_read(&dev->i2c_bus[0], + VDEC_A_BRITE_CTRL + (0x200 * decoder), &tmp); + val &= 0xFFFFFF00; + ret_val |= cx25821_i2c_write(&dev->i2c_bus[0], + VDEC_A_BRITE_CTRL + (0x200 * decoder), val | value); + return ret_val; +} + +int medusa_set_contrast(struct cx25821_dev *dev, int contrast, int decoder) +{ + int ret_val = 0; + int value = 0; + u32 val = 0, tmp = 0; + + if ((contrast > VIDEO_PROCAMP_MAX) || (contrast < VIDEO_PROCAMP_MIN)) { + return -1; + } + + ret_val = mapM(VIDEO_PROCAMP_MIN, VIDEO_PROCAMP_MAX, contrast, + UNSIGNED_BYTE_MIN, UNSIGNED_BYTE_MAX, &value); + val = cx25821_i2c_read(&dev->i2c_bus[0], + VDEC_A_CNTRST_CTRL + (0x200 * decoder), &tmp); + val &= 0xFFFFFF00; + ret_val |= cx25821_i2c_write(&dev->i2c_bus[0], + VDEC_A_CNTRST_CTRL + (0x200 * decoder), val | value); + + return ret_val; +} + +int medusa_set_hue(struct cx25821_dev *dev, int hue, int decoder) +{ + int ret_val = 0; + int value = 0; + u32 val = 0, tmp = 0; + + if ((hue > VIDEO_PROCAMP_MAX) || (hue < VIDEO_PROCAMP_MIN)) { + return -1; + } + + ret_val = mapM(VIDEO_PROCAMP_MIN, VIDEO_PROCAMP_MAX, hue, + SIGNED_BYTE_MIN, SIGNED_BYTE_MAX, &value); + + value = convert_to_twos(value, 8); + val = cx25821_i2c_read(&dev->i2c_bus[0], + VDEC_A_HUE_CTRL + (0x200 * decoder), &tmp); + val &= 0xFFFFFF00; + + ret_val |= cx25821_i2c_write(&dev->i2c_bus[0], + VDEC_A_HUE_CTRL + (0x200 * decoder), val | value); + + return ret_val; +} + +int medusa_set_saturation(struct cx25821_dev *dev, int saturation, int decoder) +{ + int ret_val = 0; + int value = 0; + u32 val = 0, tmp = 0; + + if ((saturation > VIDEO_PROCAMP_MAX) || + (saturation < VIDEO_PROCAMP_MIN)) { + return -1; + } + + ret_val = mapM(VIDEO_PROCAMP_MIN, VIDEO_PROCAMP_MAX, saturation, + UNSIGNED_BYTE_MIN, UNSIGNED_BYTE_MAX, &value); + + val = cx25821_i2c_read(&dev->i2c_bus[0], + VDEC_A_USAT_CTRL + (0x200 * decoder), &tmp); + val &= 0xFFFFFF00; + ret_val |= cx25821_i2c_write(&dev->i2c_bus[0], + VDEC_A_USAT_CTRL + (0x200 * decoder), val | value); + + val = cx25821_i2c_read(&dev->i2c_bus[0], + VDEC_A_VSAT_CTRL + (0x200 * decoder), &tmp); + val &= 0xFFFFFF00; + ret_val |= cx25821_i2c_write(&dev->i2c_bus[0], + VDEC_A_VSAT_CTRL + (0x200 * decoder), val | value); + + return ret_val; +} + +/* Program the display sequence and monitor output. */ + +int medusa_video_init(struct cx25821_dev *dev) +{ + u32 value = 0, tmp = 0; + int ret_val = 0; + int i = 0; + + _num_decoders = dev->_max_num_decoders; + + /* disable Auto source selection on all video decoders */ + value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp); + value &= 0xFFFFF0FF; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], MON_A_CTRL, value); + + if (ret_val < 0) + goto error; + + /* Turn off Master source switch enable */ + value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp); + value &= 0xFFFFFFDF; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], MON_A_CTRL, value); + + if (ret_val < 0) + goto error; + + for (i = 0; i < _num_decoders; i++) + medusa_set_decoderduration(dev, i, _display_field_cnt[i]); + + /* Select monitor as DENC A input, power up the DAC */ + value = cx25821_i2c_read(&dev->i2c_bus[0], DENC_AB_CTRL, &tmp); + value &= 0xFF70FF70; + value |= 0x00090008; /* set en_active */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], DENC_AB_CTRL, value); + + if (ret_val < 0) + goto error; + + /* enable input is VIP/656 */ + value = cx25821_i2c_read(&dev->i2c_bus[0], BYP_AB_CTRL, &tmp); + value |= 0x00040100; /* enable VIP */ + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], BYP_AB_CTRL, value); + + if (ret_val < 0) + goto error; + + /* select AFE clock to output mode */ + value = cx25821_i2c_read(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL, &tmp); + value &= 0x83FFFFFF; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL, + value | 0x10000000); + + if (ret_val < 0) + goto error; + + /* Turn on all of the data out and control output pins. */ + value = cx25821_i2c_read(&dev->i2c_bus[0], PIN_OE_CTRL, &tmp); + value &= 0xFEF0FE00; + if (_num_decoders == MAX_DECODERS) { + /* + * Note: The octal board does not support control pins(bit16-19) + * These bits are ignored in the octal board. + * + * disable VDEC A-C port, default to Mobilygen Interface + */ + value |= 0x010001F8; + } else { + /* disable VDEC A-C port, default to Mobilygen Interface */ + value |= 0x010F0108; + } + + value |= 7; + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], PIN_OE_CTRL, value); + + if (ret_val < 0) + goto error; + + ret_val = medusa_set_videostandard(dev); + +error: + return ret_val; +} diff --git a/drivers/media/pci/cx25821/cx25821-medusa-video.h b/drivers/media/pci/cx25821/cx25821-medusa-video.h new file mode 100644 index 00000000..6175e096 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-medusa-video.h @@ -0,0 +1,49 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _MEDUSA_VIDEO_H +#define _MEDUSA_VIDEO_H + +#include "cx25821-medusa-defines.h" + +/* Color control constants */ +#define VIDEO_PROCAMP_MIN 0 +#define VIDEO_PROCAMP_MAX 10000 +#define UNSIGNED_BYTE_MIN 0 +#define UNSIGNED_BYTE_MAX 0xFF +#define SIGNED_BYTE_MIN -128 +#define SIGNED_BYTE_MAX 127 + +/* Default video color settings */ +#define SHARPNESS_DEFAULT 50 +#define SATURATION_DEFAULT 5000 +#define BRIGHTNESS_DEFAULT 6200 +#define CONTRAST_DEFAULT 5000 +#define HUE_DEFAULT 5000 + +unsigned short _num_decoders; +unsigned short _num_cameras; + +unsigned int _video_standard; +int _display_field_cnt[MAX_DECODERS]; + +#endif diff --git a/drivers/media/pci/cx25821/cx25821-reg.h b/drivers/media/pci/cx25821/cx25821-reg.h new file mode 100644 index 00000000..a3fc25a4 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-reg.h @@ -0,0 +1,1592 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CX25821_REGISTERS__ +#define __CX25821_REGISTERS__ + +/* Risc Instructions */ +#define RISC_CNT_INC 0x00010000 +#define RISC_CNT_RESET 0x00030000 +#define RISC_IRQ1 0x01000000 +#define RISC_IRQ2 0x02000000 +#define RISC_EOL 0x04000000 +#define RISC_SOL 0x08000000 +#define RISC_WRITE 0x10000000 +#define RISC_SKIP 0x20000000 +#define RISC_JUMP 0x70000000 +#define RISC_SYNC 0x80000000 +#define RISC_RESYNC 0x80008000 +#define RISC_READ 0x90000000 +#define RISC_WRITERM 0xB0000000 +#define RISC_WRITECM 0xC0000000 +#define RISC_WRITECR 0xD0000000 +#define RISC_WRITEC 0x50000000 +#define RISC_READC 0xA0000000 + +#define RISC_SYNC_ODD 0x00000000 +#define RISC_SYNC_EVEN 0x00000200 +#define RISC_SYNC_ODD_VBI 0x00000006 +#define RISC_SYNC_EVEN_VBI 0x00000207 +#define RISC_NOOP 0xF0000000 + +/***************************************************************************** +* ASB SRAM + *****************************************************************************/ +#define TX_SRAM 0x000000 /* Transmit SRAM */ + +/*****************************************************************************/ +#define RX_RAM 0x010000 /* Receive SRAM */ + +/***************************************************************************** +* Application Layer (AL) + *****************************************************************************/ +#define DEV_CNTRL2 0x040000 /* Device control */ +#define FLD_RUN_RISC 0x00000020 + +/* ***************************************************************************** */ +#define PCI_INT_MSK 0x040010 /* PCI interrupt mask */ +#define PCI_INT_STAT 0x040014 /* PCI interrupt status */ +#define PCI_INT_MSTAT 0x040018 /* PCI interrupt masked status */ +#define FLD_HAMMERHEAD_INT (1 << 27) +#define FLD_UART_INT (1 << 26) +#define FLD_IRQN_INT (1 << 25) +#define FLD_TM_INT (1 << 28) +#define FLD_I2C_3_RACK (1 << 27) +#define FLD_I2C_3_INT (1 << 26) +#define FLD_I2C_2_RACK (1 << 25) +#define FLD_I2C_2_INT (1 << 24) +#define FLD_I2C_1_RACK (1 << 23) +#define FLD_I2C_1_INT (1 << 22) + +#define FLD_APB_DMA_BERR_INT (1 << 21) +#define FLD_AL_WR_BERR_INT (1 << 20) +#define FLD_AL_RD_BERR_INT (1 << 19) +#define FLD_RISC_WR_BERR_INT (1 << 18) +#define FLD_RISC_RD_BERR_INT (1 << 17) + +#define FLD_VID_I_INT (1 << 8) +#define FLD_VID_H_INT (1 << 7) +#define FLD_VID_G_INT (1 << 6) +#define FLD_VID_F_INT (1 << 5) +#define FLD_VID_E_INT (1 << 4) +#define FLD_VID_D_INT (1 << 3) +#define FLD_VID_C_INT (1 << 2) +#define FLD_VID_B_INT (1 << 1) +#define FLD_VID_A_INT (1 << 0) + +/* ***************************************************************************** */ +#define VID_A_INT_MSK 0x040020 /* Video A interrupt mask */ +#define VID_A_INT_STAT 0x040024 /* Video A interrupt status */ +#define VID_A_INT_MSTAT 0x040028 /* Video A interrupt masked status */ +#define VID_A_INT_SSTAT 0x04002C /* Video A interrupt set status */ + +/* ***************************************************************************** */ +#define VID_B_INT_MSK 0x040030 /* Video B interrupt mask */ +#define VID_B_INT_STAT 0x040034 /* Video B interrupt status */ +#define VID_B_INT_MSTAT 0x040038 /* Video B interrupt masked status */ +#define VID_B_INT_SSTAT 0x04003C /* Video B interrupt set status */ + +/* ***************************************************************************** */ +#define VID_C_INT_MSK 0x040040 /* Video C interrupt mask */ +#define VID_C_INT_STAT 0x040044 /* Video C interrupt status */ +#define VID_C_INT_MSTAT 0x040048 /* Video C interrupt masked status */ +#define VID_C_INT_SSTAT 0x04004C /* Video C interrupt set status */ + +/* ***************************************************************************** */ +#define VID_D_INT_MSK 0x040050 /* Video D interrupt mask */ +#define VID_D_INT_STAT 0x040054 /* Video D interrupt status */ +#define VID_D_INT_MSTAT 0x040058 /* Video D interrupt masked status */ +#define VID_D_INT_SSTAT 0x04005C /* Video D interrupt set status */ + +/* ***************************************************************************** */ +#define VID_E_INT_MSK 0x040060 /* Video E interrupt mask */ +#define VID_E_INT_STAT 0x040064 /* Video E interrupt status */ +#define VID_E_INT_MSTAT 0x040068 /* Video E interrupt masked status */ +#define VID_E_INT_SSTAT 0x04006C /* Video E interrupt set status */ + +/* ***************************************************************************** */ +#define VID_F_INT_MSK 0x040070 /* Video F interrupt mask */ +#define VID_F_INT_STAT 0x040074 /* Video F interrupt status */ +#define VID_F_INT_MSTAT 0x040078 /* Video F interrupt masked status */ +#define VID_F_INT_SSTAT 0x04007C /* Video F interrupt set status */ + +/* ***************************************************************************** */ +#define VID_G_INT_MSK 0x040080 /* Video G interrupt mask */ +#define VID_G_INT_STAT 0x040084 /* Video G interrupt status */ +#define VID_G_INT_MSTAT 0x040088 /* Video G interrupt masked status */ +#define VID_G_INT_SSTAT 0x04008C /* Video G interrupt set status */ + +/* ***************************************************************************** */ +#define VID_H_INT_MSK 0x040090 /* Video H interrupt mask */ +#define VID_H_INT_STAT 0x040094 /* Video H interrupt status */ +#define VID_H_INT_MSTAT 0x040098 /* Video H interrupt masked status */ +#define VID_H_INT_SSTAT 0x04009C /* Video H interrupt set status */ + +/* ***************************************************************************** */ +#define VID_I_INT_MSK 0x0400A0 /* Video I interrupt mask */ +#define VID_I_INT_STAT 0x0400A4 /* Video I interrupt status */ +#define VID_I_INT_MSTAT 0x0400A8 /* Video I interrupt masked status */ +#define VID_I_INT_SSTAT 0x0400AC /* Video I interrupt set status */ + +/* ***************************************************************************** */ +#define VID_J_INT_MSK 0x0400B0 /* Video J interrupt mask */ +#define VID_J_INT_STAT 0x0400B4 /* Video J interrupt status */ +#define VID_J_INT_MSTAT 0x0400B8 /* Video J interrupt masked status */ +#define VID_J_INT_SSTAT 0x0400BC /* Video J interrupt set status */ + +#define FLD_VID_SRC_OPC_ERR 0x00020000 +#define FLD_VID_DST_OPC_ERR 0x00010000 +#define FLD_VID_SRC_SYNC 0x00002000 +#define FLD_VID_DST_SYNC 0x00001000 +#define FLD_VID_SRC_UF 0x00000200 +#define FLD_VID_DST_OF 0x00000100 +#define FLD_VID_SRC_RISC2 0x00000020 +#define FLD_VID_DST_RISC2 0x00000010 +#define FLD_VID_SRC_RISC1 0x00000002 +#define FLD_VID_DST_RISC1 0x00000001 +#define FLD_VID_SRC_ERRORS (FLD_VID_SRC_OPC_ERR | FLD_VID_SRC_SYNC | FLD_VID_SRC_UF) +#define FLD_VID_DST_ERRORS (FLD_VID_DST_OPC_ERR | FLD_VID_DST_SYNC | FLD_VID_DST_OF) + +/* ***************************************************************************** */ +#define AUD_A_INT_MSK 0x0400C0 /* Audio Int interrupt mask */ +#define AUD_A_INT_STAT 0x0400C4 /* Audio Int interrupt status */ +#define AUD_A_INT_MSTAT 0x0400C8 /* Audio Int interrupt masked status */ +#define AUD_A_INT_SSTAT 0x0400CC /* Audio Int interrupt set status */ + +/* ***************************************************************************** */ +#define AUD_B_INT_MSK 0x0400D0 /* Audio Int interrupt mask */ +#define AUD_B_INT_STAT 0x0400D4 /* Audio Int interrupt status */ +#define AUD_B_INT_MSTAT 0x0400D8 /* Audio Int interrupt masked status */ +#define AUD_B_INT_SSTAT 0x0400DC /* Audio Int interrupt set status */ + +/* ***************************************************************************** */ +#define AUD_C_INT_MSK 0x0400E0 /* Audio Int interrupt mask */ +#define AUD_C_INT_STAT 0x0400E4 /* Audio Int interrupt status */ +#define AUD_C_INT_MSTAT 0x0400E8 /* Audio Int interrupt masked status */ +#define AUD_C_INT_SSTAT 0x0400EC /* Audio Int interrupt set status */ + +/* ***************************************************************************** */ +#define AUD_D_INT_MSK 0x0400F0 /* Audio Int interrupt mask */ +#define AUD_D_INT_STAT 0x0400F4 /* Audio Int interrupt status */ +#define AUD_D_INT_MSTAT 0x0400F8 /* Audio Int interrupt masked status */ +#define AUD_D_INT_SSTAT 0x0400FC /* Audio Int interrupt set status */ + +/* ***************************************************************************** */ +#define AUD_E_INT_MSK 0x040100 /* Audio Int interrupt mask */ +#define AUD_E_INT_STAT 0x040104 /* Audio Int interrupt status */ +#define AUD_E_INT_MSTAT 0x040108 /* Audio Int interrupt masked status */ +#define AUD_E_INT_SSTAT 0x04010C /* Audio Int interrupt set status */ + +#define FLD_AUD_SRC_OPC_ERR 0x00020000 +#define FLD_AUD_DST_OPC_ERR 0x00010000 +#define FLD_AUD_SRC_SYNC 0x00002000 +#define FLD_AUD_DST_SYNC 0x00001000 +#define FLD_AUD_SRC_OF 0x00000200 +#define FLD_AUD_DST_OF 0x00000100 +#define FLD_AUD_SRC_RISCI2 0x00000020 +#define FLD_AUD_DST_RISCI2 0x00000010 +#define FLD_AUD_SRC_RISCI1 0x00000002 +#define FLD_AUD_DST_RISCI1 0x00000001 + +/* ***************************************************************************** */ +#define MBIF_A_INT_MSK 0x040110 /* MBIF Int interrupt mask */ +#define MBIF_A_INT_STAT 0x040114 /* MBIF Int interrupt status */ +#define MBIF_A_INT_MSTAT 0x040118 /* MBIF Int interrupt masked status */ +#define MBIF_A_INT_SSTAT 0x04011C /* MBIF Int interrupt set status */ + +/* ***************************************************************************** */ +#define MBIF_B_INT_MSK 0x040120 /* MBIF Int interrupt mask */ +#define MBIF_B_INT_STAT 0x040124 /* MBIF Int interrupt status */ +#define MBIF_B_INT_MSTAT 0x040128 /* MBIF Int interrupt masked status */ +#define MBIF_B_INT_SSTAT 0x04012C /* MBIF Int interrupt set status */ + +#define FLD_MBIF_DST_OPC_ERR 0x00010000 +#define FLD_MBIF_DST_SYNC 0x00001000 +#define FLD_MBIF_DST_OF 0x00000100 +#define FLD_MBIF_DST_RISCI2 0x00000010 +#define FLD_MBIF_DST_RISCI1 0x00000001 + +/* ***************************************************************************** */ +#define AUD_EXT_INT_MSK 0x040060 /* Audio Ext interrupt mask */ +#define AUD_EXT_INT_STAT 0x040064 /* Audio Ext interrupt status */ +#define AUD_EXT_INT_MSTAT 0x040068 /* Audio Ext interrupt masked status */ +#define AUD_EXT_INT_SSTAT 0x04006C /* Audio Ext interrupt set status */ +#define FLD_AUD_EXT_OPC_ERR 0x00010000 +#define FLD_AUD_EXT_SYNC 0x00001000 +#define FLD_AUD_EXT_OF 0x00000100 +#define FLD_AUD_EXT_RISCI2 0x00000010 +#define FLD_AUD_EXT_RISCI1 0x00000001 + +/* ***************************************************************************** */ +#define GPIO_LO 0x110010 /* Lower of GPIO pins [31:0] */ +#define GPIO_HI 0x110014 /* Upper WORD of GPIO pins [47:31] */ + +#define GPIO_LO_OE 0x110018 /* Lower of GPIO output enable [31:0] */ +#define GPIO_HI_OE 0x11001C /* Upper word of GPIO output enable [47:32] */ + +#define GPIO_LO_INT_MSK 0x11003C /* GPIO interrupt mask */ +#define GPIO_LO_INT_STAT 0x110044 /* GPIO interrupt status */ +#define GPIO_LO_INT_MSTAT 0x11004C /* GPIO interrupt masked status */ +#define GPIO_LO_ISM_SNS 0x110054 /* GPIO interrupt sensitivity */ +#define GPIO_LO_ISM_POL 0x11005C /* GPIO interrupt polarity */ + +#define GPIO_HI_INT_MSK 0x110040 /* GPIO interrupt mask */ +#define GPIO_HI_INT_STAT 0x110048 /* GPIO interrupt status */ +#define GPIO_HI_INT_MSTAT 0x110050 /* GPIO interrupt masked status */ +#define GPIO_HI_ISM_SNS 0x110058 /* GPIO interrupt sensitivity */ +#define GPIO_HI_ISM_POL 0x110060 /* GPIO interrupt polarity */ + +#define FLD_GPIO43_INT (1 << 11) +#define FLD_GPIO42_INT (1 << 10) +#define FLD_GPIO41_INT (1 << 9) +#define FLD_GPIO40_INT (1 << 8) + +#define FLD_GPIO9_INT (1 << 9) +#define FLD_GPIO8_INT (1 << 8) +#define FLD_GPIO7_INT (1 << 7) +#define FLD_GPIO6_INT (1 << 6) +#define FLD_GPIO5_INT (1 << 5) +#define FLD_GPIO4_INT (1 << 4) +#define FLD_GPIO3_INT (1 << 3) +#define FLD_GPIO2_INT (1 << 2) +#define FLD_GPIO1_INT (1 << 1) +#define FLD_GPIO0_INT (1 << 0) + +/* ***************************************************************************** */ +#define TC_REQ 0x040090 /* Rider PCI Express traFFic class request */ + +/* ***************************************************************************** */ +#define TC_REQ_SET 0x040094 /* Rider PCI Express traFFic class request set */ + +/* ***************************************************************************** */ +/* Rider */ +/* ***************************************************************************** */ + +/* PCI Compatible Header */ +/* ***************************************************************************** */ +#define RDR_CFG0 0x050000 +#define RDR_VENDOR_DEVICE_ID_CFG 0x050000 + +/* ***************************************************************************** */ +#define RDR_CFG1 0x050004 + +/* ***************************************************************************** */ +#define RDR_CFG2 0x050008 + +/* ***************************************************************************** */ +#define RDR_CFG3 0x05000C + +/* ***************************************************************************** */ +#define RDR_CFG4 0x050010 + +/* ***************************************************************************** */ +#define RDR_CFG5 0x050014 + +/* ***************************************************************************** */ +#define RDR_CFG6 0x050018 + +/* ***************************************************************************** */ +#define RDR_CFG7 0x05001C + +/* ***************************************************************************** */ +#define RDR_CFG8 0x050020 + +/* ***************************************************************************** */ +#define RDR_CFG9 0x050024 + +/* ***************************************************************************** */ +#define RDR_CFGA 0x050028 + +/* ***************************************************************************** */ +#define RDR_CFGB 0x05002C +#define RDR_SUSSYSTEM_ID_CFG 0x05002C + +/* ***************************************************************************** */ +#define RDR_CFGC 0x050030 + +/* ***************************************************************************** */ +#define RDR_CFGD 0x050034 + +/* ***************************************************************************** */ +#define RDR_CFGE 0x050038 + +/* ***************************************************************************** */ +#define RDR_CFGF 0x05003C + +/* ***************************************************************************** */ +/* PCI-Express Capabilities */ +/* ***************************************************************************** */ +#define RDR_PECAP 0x050040 + +/* ***************************************************************************** */ +#define RDR_PEDEVCAP 0x050044 + +/* ***************************************************************************** */ +#define RDR_PEDEVSC 0x050048 + +/* ***************************************************************************** */ +#define RDR_PELINKCAP 0x05004C + +/* ***************************************************************************** */ +#define RDR_PELINKSC 0x050050 + +/* ***************************************************************************** */ +#define RDR_PMICAP 0x050080 + +/* ***************************************************************************** */ +#define RDR_PMCSR 0x050084 + +/* ***************************************************************************** */ +#define RDR_VPDCAP 0x050090 + +/* ***************************************************************************** */ +#define RDR_VPDDATA 0x050094 + +/* ***************************************************************************** */ +#define RDR_MSICAP 0x0500A0 + +/* ***************************************************************************** */ +#define RDR_MSIARL 0x0500A4 + +/* ***************************************************************************** */ +#define RDR_MSIARU 0x0500A8 + +/* ***************************************************************************** */ +#define RDR_MSIDATA 0x0500AC + +/* ***************************************************************************** */ +/* PCI Express Extended Capabilities */ +/* ***************************************************************************** */ +#define RDR_AERXCAP 0x050100 + +/* ***************************************************************************** */ +#define RDR_AERUESTA 0x050104 + +/* ***************************************************************************** */ +#define RDR_AERUEMSK 0x050108 + +/* ***************************************************************************** */ +#define RDR_AERUESEV 0x05010C + +/* ***************************************************************************** */ +#define RDR_AERCESTA 0x050110 + +/* ***************************************************************************** */ +#define RDR_AERCEMSK 0x050114 + +/* ***************************************************************************** */ +#define RDR_AERCC 0x050118 + +/* ***************************************************************************** */ +#define RDR_AERHL0 0x05011C + +/* ***************************************************************************** */ +#define RDR_AERHL1 0x050120 + +/* ***************************************************************************** */ +#define RDR_AERHL2 0x050124 + +/* ***************************************************************************** */ +#define RDR_AERHL3 0x050128 + +/* ***************************************************************************** */ +#define RDR_VCXCAP 0x050200 + +/* ***************************************************************************** */ +#define RDR_VCCAP1 0x050204 + +/* ***************************************************************************** */ +#define RDR_VCCAP2 0x050208 + +/* ***************************************************************************** */ +#define RDR_VCSC 0x05020C + +/* ***************************************************************************** */ +#define RDR_VCR0_CAP 0x050210 + +/* ***************************************************************************** */ +#define RDR_VCR0_CTRL 0x050214 + +/* ***************************************************************************** */ +#define RDR_VCR0_STAT 0x050218 + +/* ***************************************************************************** */ +#define RDR_VCR1_CAP 0x05021C + +/* ***************************************************************************** */ +#define RDR_VCR1_CTRL 0x050220 + +/* ***************************************************************************** */ +#define RDR_VCR1_STAT 0x050224 + +/* ***************************************************************************** */ +#define RDR_VCR2_CAP 0x050228 + +/* ***************************************************************************** */ +#define RDR_VCR2_CTRL 0x05022C + +/* ***************************************************************************** */ +#define RDR_VCR2_STAT 0x050230 + +/* ***************************************************************************** */ +#define RDR_VCR3_CAP 0x050234 + +/* ***************************************************************************** */ +#define RDR_VCR3_CTRL 0x050238 + +/* ***************************************************************************** */ +#define RDR_VCR3_STAT 0x05023C + +/* ***************************************************************************** */ +#define RDR_VCARB0 0x050240 + +/* ***************************************************************************** */ +#define RDR_VCARB1 0x050244 + +/* ***************************************************************************** */ +#define RDR_VCARB2 0x050248 + +/* ***************************************************************************** */ +#define RDR_VCARB3 0x05024C + +/* ***************************************************************************** */ +#define RDR_VCARB4 0x050250 + +/* ***************************************************************************** */ +#define RDR_VCARB5 0x050254 + +/* ***************************************************************************** */ +#define RDR_VCARB6 0x050258 + +/* ***************************************************************************** */ +#define RDR_VCARB7 0x05025C + +/* ***************************************************************************** */ +#define RDR_RDRSTAT0 0x050300 + +/* ***************************************************************************** */ +#define RDR_RDRSTAT1 0x050304 + +/* ***************************************************************************** */ +#define RDR_RDRCTL0 0x050308 + +/* ***************************************************************************** */ +#define RDR_RDRCTL1 0x05030C + +/* ***************************************************************************** */ +/* Transaction Layer Registers */ +/* ***************************************************************************** */ +#define RDR_TLSTAT0 0x050310 + +/* ***************************************************************************** */ +#define RDR_TLSTAT1 0x050314 + +/* ***************************************************************************** */ +#define RDR_TLCTL0 0x050318 +#define FLD_CFG_UR_CPL_MODE 0x00000040 +#define FLD_CFG_CORR_ERR_QUITE 0x00000020 +#define FLD_CFG_RCB_CK_EN 0x00000010 +#define FLD_CFG_BNDRY_CK_EN 0x00000008 +#define FLD_CFG_BYTE_EN_CK_EN 0x00000004 +#define FLD_CFG_RELAX_ORDER_MSK 0x00000002 +#define FLD_CFG_TAG_ORDER_EN 0x00000001 + +/* ***************************************************************************** */ +#define RDR_TLCTL1 0x05031C + +/* ***************************************************************************** */ +#define RDR_REQRCAL 0x050320 + +/* ***************************************************************************** */ +#define RDR_REQRCAU 0x050324 + +/* ***************************************************************************** */ +#define RDR_REQEPA 0x050328 + +/* ***************************************************************************** */ +#define RDR_REQCTRL 0x05032C + +/* ***************************************************************************** */ +#define RDR_REQSTAT 0x050330 + +/* ***************************************************************************** */ +#define RDR_TL_TEST 0x050334 + +/* ***************************************************************************** */ +#define RDR_VCR01_CTL 0x050348 + +/* ***************************************************************************** */ +#define RDR_VCR23_CTL 0x05034C + +/* ***************************************************************************** */ +#define RDR_RX_VCR0_FC 0x050350 + +/* ***************************************************************************** */ +#define RDR_RX_VCR1_FC 0x050354 + +/* ***************************************************************************** */ +#define RDR_RX_VCR2_FC 0x050358 + +/* ***************************************************************************** */ +#define RDR_RX_VCR3_FC 0x05035C + +/* ***************************************************************************** */ +/* Data Link Layer Registers */ +/* ***************************************************************************** */ +#define RDR_DLLSTAT 0x050360 + +/* ***************************************************************************** */ +#define RDR_DLLCTRL 0x050364 + +/* ***************************************************************************** */ +#define RDR_REPLAYTO 0x050368 + +/* ***************************************************************************** */ +#define RDR_ACKLATTO 0x05036C + +/* ***************************************************************************** */ +/* MAC Layer Registers */ +/* ***************************************************************************** */ +#define RDR_MACSTAT0 0x050380 + +/* ***************************************************************************** */ +#define RDR_MACSTAT1 0x050384 + +/* ***************************************************************************** */ +#define RDR_MACCTRL0 0x050388 + +/* ***************************************************************************** */ +#define RDR_MACCTRL1 0x05038C + +/* ***************************************************************************** */ +#define RDR_MACCTRL2 0x050390 + +/* ***************************************************************************** */ +#define RDR_MAC_LB_DATA 0x050394 + +/* ***************************************************************************** */ +#define RDR_L0S_EXIT_LAT 0x050398 + +/* ***************************************************************************** */ +/* DMAC */ +/* ***************************************************************************** */ +#define DMA1_PTR1 0x100000 /* DMA Current Ptr : Ch#1 */ + +/* ***************************************************************************** */ +#define DMA2_PTR1 0x100004 /* DMA Current Ptr : Ch#2 */ + +/* ***************************************************************************** */ +#define DMA3_PTR1 0x100008 /* DMA Current Ptr : Ch#3 */ + +/* ***************************************************************************** */ +#define DMA4_PTR1 0x10000C /* DMA Current Ptr : Ch#4 */ + +/* ***************************************************************************** */ +#define DMA5_PTR1 0x100010 /* DMA Current Ptr : Ch#5 */ + +/* ***************************************************************************** */ +#define DMA6_PTR1 0x100014 /* DMA Current Ptr : Ch#6 */ + +/* ***************************************************************************** */ +#define DMA7_PTR1 0x100018 /* DMA Current Ptr : Ch#7 */ + +/* ***************************************************************************** */ +#define DMA8_PTR1 0x10001C /* DMA Current Ptr : Ch#8 */ + +/* ***************************************************************************** */ +#define DMA9_PTR1 0x100020 /* DMA Current Ptr : Ch#9 */ + +/* ***************************************************************************** */ +#define DMA10_PTR1 0x100024 /* DMA Current Ptr : Ch#10 */ + +/* ***************************************************************************** */ +#define DMA11_PTR1 0x100028 /* DMA Current Ptr : Ch#11 */ + +/* ***************************************************************************** */ +#define DMA12_PTR1 0x10002C /* DMA Current Ptr : Ch#12 */ + +/* ***************************************************************************** */ +#define DMA13_PTR1 0x100030 /* DMA Current Ptr : Ch#13 */ + +/* ***************************************************************************** */ +#define DMA14_PTR1 0x100034 /* DMA Current Ptr : Ch#14 */ + +/* ***************************************************************************** */ +#define DMA15_PTR1 0x100038 /* DMA Current Ptr : Ch#15 */ + +/* ***************************************************************************** */ +#define DMA16_PTR1 0x10003C /* DMA Current Ptr : Ch#16 */ + +/* ***************************************************************************** */ +#define DMA17_PTR1 0x100040 /* DMA Current Ptr : Ch#17 */ + +/* ***************************************************************************** */ +#define DMA18_PTR1 0x100044 /* DMA Current Ptr : Ch#18 */ + +/* ***************************************************************************** */ +#define DMA19_PTR1 0x100048 /* DMA Current Ptr : Ch#19 */ + +/* ***************************************************************************** */ +#define DMA20_PTR1 0x10004C /* DMA Current Ptr : Ch#20 */ + +/* ***************************************************************************** */ +#define DMA21_PTR1 0x100050 /* DMA Current Ptr : Ch#21 */ + +/* ***************************************************************************** */ +#define DMA22_PTR1 0x100054 /* DMA Current Ptr : Ch#22 */ + +/* ***************************************************************************** */ +#define DMA23_PTR1 0x100058 /* DMA Current Ptr : Ch#23 */ + +/* ***************************************************************************** */ +#define DMA24_PTR1 0x10005C /* DMA Current Ptr : Ch#24 */ + +/* ***************************************************************************** */ +#define DMA25_PTR1 0x100060 /* DMA Current Ptr : Ch#25 */ + +/* ***************************************************************************** */ +#define DMA26_PTR1 0x100064 /* DMA Current Ptr : Ch#26 */ + +/* ***************************************************************************** */ +#define DMA1_PTR2 0x100080 /* DMA Tab Ptr : Ch#1 */ + +/* ***************************************************************************** */ +#define DMA2_PTR2 0x100084 /* DMA Tab Ptr : Ch#2 */ + +/* ***************************************************************************** */ +#define DMA3_PTR2 0x100088 /* DMA Tab Ptr : Ch#3 */ + +/* ***************************************************************************** */ +#define DMA4_PTR2 0x10008C /* DMA Tab Ptr : Ch#4 */ + +/* ***************************************************************************** */ +#define DMA5_PTR2 0x100090 /* DMA Tab Ptr : Ch#5 */ + +/* ***************************************************************************** */ +#define DMA6_PTR2 0x100094 /* DMA Tab Ptr : Ch#6 */ + +/* ***************************************************************************** */ +#define DMA7_PTR2 0x100098 /* DMA Tab Ptr : Ch#7 */ + +/* ***************************************************************************** */ +#define DMA8_PTR2 0x10009C /* DMA Tab Ptr : Ch#8 */ + +/* ***************************************************************************** */ +#define DMA9_PTR2 0x1000A0 /* DMA Tab Ptr : Ch#9 */ + +/* ***************************************************************************** */ +#define DMA10_PTR2 0x1000A4 /* DMA Tab Ptr : Ch#10 */ + +/* ***************************************************************************** */ +#define DMA11_PTR2 0x1000A8 /* DMA Tab Ptr : Ch#11 */ + +/* ***************************************************************************** */ +#define DMA12_PTR2 0x1000AC /* DMA Tab Ptr : Ch#12 */ + +/* ***************************************************************************** */ +#define DMA13_PTR2 0x1000B0 /* DMA Tab Ptr : Ch#13 */ + +/* ***************************************************************************** */ +#define DMA14_PTR2 0x1000B4 /* DMA Tab Ptr : Ch#14 */ + +/* ***************************************************************************** */ +#define DMA15_PTR2 0x1000B8 /* DMA Tab Ptr : Ch#15 */ + +/* ***************************************************************************** */ +#define DMA16_PTR2 0x1000BC /* DMA Tab Ptr : Ch#16 */ + +/* ***************************************************************************** */ +#define DMA17_PTR2 0x1000C0 /* DMA Tab Ptr : Ch#17 */ + +/* ***************************************************************************** */ +#define DMA18_PTR2 0x1000C4 /* DMA Tab Ptr : Ch#18 */ + +/* ***************************************************************************** */ +#define DMA19_PTR2 0x1000C8 /* DMA Tab Ptr : Ch#19 */ + +/* ***************************************************************************** */ +#define DMA20_PTR2 0x1000CC /* DMA Tab Ptr : Ch#20 */ + +/* ***************************************************************************** */ +#define DMA21_PTR2 0x1000D0 /* DMA Tab Ptr : Ch#21 */ + +/* ***************************************************************************** */ +#define DMA22_PTR2 0x1000D4 /* DMA Tab Ptr : Ch#22 */ + +/* ***************************************************************************** */ +#define DMA23_PTR2 0x1000D8 /* DMA Tab Ptr : Ch#23 */ + +/* ***************************************************************************** */ +#define DMA24_PTR2 0x1000DC /* DMA Tab Ptr : Ch#24 */ + +/* ***************************************************************************** */ +#define DMA25_PTR2 0x1000E0 /* DMA Tab Ptr : Ch#25 */ + +/* ***************************************************************************** */ +#define DMA26_PTR2 0x1000E4 /* DMA Tab Ptr : Ch#26 */ + +/* ***************************************************************************** */ +#define DMA1_CNT1 0x100100 /* DMA BuFFer Size : Ch#1 */ + +/* ***************************************************************************** */ +#define DMA2_CNT1 0x100104 /* DMA BuFFer Size : Ch#2 */ + +/* ***************************************************************************** */ +#define DMA3_CNT1 0x100108 /* DMA BuFFer Size : Ch#3 */ + +/* ***************************************************************************** */ +#define DMA4_CNT1 0x10010C /* DMA BuFFer Size : Ch#4 */ + +/* ***************************************************************************** */ +#define DMA5_CNT1 0x100110 /* DMA BuFFer Size : Ch#5 */ + +/* ***************************************************************************** */ +#define DMA6_CNT1 0x100114 /* DMA BuFFer Size : Ch#6 */ + +/* ***************************************************************************** */ +#define DMA7_CNT1 0x100118 /* DMA BuFFer Size : Ch#7 */ + +/* ***************************************************************************** */ +#define DMA8_CNT1 0x10011C /* DMA BuFFer Size : Ch#8 */ + +/* ***************************************************************************** */ +#define DMA9_CNT1 0x100120 /* DMA BuFFer Size : Ch#9 */ + +/* ***************************************************************************** */ +#define DMA10_CNT1 0x100124 /* DMA BuFFer Size : Ch#10 */ + +/* ***************************************************************************** */ +#define DMA11_CNT1 0x100128 /* DMA BuFFer Size : Ch#11 */ + +/* ***************************************************************************** */ +#define DMA12_CNT1 0x10012C /* DMA BuFFer Size : Ch#12 */ + +/* ***************************************************************************** */ +#define DMA13_CNT1 0x100130 /* DMA BuFFer Size : Ch#13 */ + +/* ***************************************************************************** */ +#define DMA14_CNT1 0x100134 /* DMA BuFFer Size : Ch#14 */ + +/* ***************************************************************************** */ +#define DMA15_CNT1 0x100138 /* DMA BuFFer Size : Ch#15 */ + +/* ***************************************************************************** */ +#define DMA16_CNT1 0x10013C /* DMA BuFFer Size : Ch#16 */ + +/* ***************************************************************************** */ +#define DMA17_CNT1 0x100140 /* DMA BuFFer Size : Ch#17 */ + +/* ***************************************************************************** */ +#define DMA18_CNT1 0x100144 /* DMA BuFFer Size : Ch#18 */ + +/* ***************************************************************************** */ +#define DMA19_CNT1 0x100148 /* DMA BuFFer Size : Ch#19 */ + +/* ***************************************************************************** */ +#define DMA20_CNT1 0x10014C /* DMA BuFFer Size : Ch#20 */ + +/* ***************************************************************************** */ +#define DMA21_CNT1 0x100150 /* DMA BuFFer Size : Ch#21 */ + +/* ***************************************************************************** */ +#define DMA22_CNT1 0x100154 /* DMA BuFFer Size : Ch#22 */ + +/* ***************************************************************************** */ +#define DMA23_CNT1 0x100158 /* DMA BuFFer Size : Ch#23 */ + +/* ***************************************************************************** */ +#define DMA24_CNT1 0x10015C /* DMA BuFFer Size : Ch#24 */ + +/* ***************************************************************************** */ +#define DMA25_CNT1 0x100160 /* DMA BuFFer Size : Ch#25 */ + +/* ***************************************************************************** */ +#define DMA26_CNT1 0x100164 /* DMA BuFFer Size : Ch#26 */ + +/* ***************************************************************************** */ +#define DMA1_CNT2 0x100180 /* DMA Table Size : Ch#1 */ + +/* ***************************************************************************** */ +#define DMA2_CNT2 0x100184 /* DMA Table Size : Ch#2 */ + +/* ***************************************************************************** */ +#define DMA3_CNT2 0x100188 /* DMA Table Size : Ch#3 */ + +/* ***************************************************************************** */ +#define DMA4_CNT2 0x10018C /* DMA Table Size : Ch#4 */ + +/* ***************************************************************************** */ +#define DMA5_CNT2 0x100190 /* DMA Table Size : Ch#5 */ + +/* ***************************************************************************** */ +#define DMA6_CNT2 0x100194 /* DMA Table Size : Ch#6 */ + +/* ***************************************************************************** */ +#define DMA7_CNT2 0x100198 /* DMA Table Size : Ch#7 */ + +/* ***************************************************************************** */ +#define DMA8_CNT2 0x10019C /* DMA Table Size : Ch#8 */ + +/* ***************************************************************************** */ +#define DMA9_CNT2 0x1001A0 /* DMA Table Size : Ch#9 */ + +/* ***************************************************************************** */ +#define DMA10_CNT2 0x1001A4 /* DMA Table Size : Ch#10 */ + +/* ***************************************************************************** */ +#define DMA11_CNT2 0x1001A8 /* DMA Table Size : Ch#11 */ + +/* ***************************************************************************** */ +#define DMA12_CNT2 0x1001AC /* DMA Table Size : Ch#12 */ + +/* ***************************************************************************** */ +#define DMA13_CNT2 0x1001B0 /* DMA Table Size : Ch#13 */ + +/* ***************************************************************************** */ +#define DMA14_CNT2 0x1001B4 /* DMA Table Size : Ch#14 */ + +/* ***************************************************************************** */ +#define DMA15_CNT2 0x1001B8 /* DMA Table Size : Ch#15 */ + +/* ***************************************************************************** */ +#define DMA16_CNT2 0x1001BC /* DMA Table Size : Ch#16 */ + +/* ***************************************************************************** */ +#define DMA17_CNT2 0x1001C0 /* DMA Table Size : Ch#17 */ + +/* ***************************************************************************** */ +#define DMA18_CNT2 0x1001C4 /* DMA Table Size : Ch#18 */ + +/* ***************************************************************************** */ +#define DMA19_CNT2 0x1001C8 /* DMA Table Size : Ch#19 */ + +/* ***************************************************************************** */ +#define DMA20_CNT2 0x1001CC /* DMA Table Size : Ch#20 */ + +/* ***************************************************************************** */ +#define DMA21_CNT2 0x1001D0 /* DMA Table Size : Ch#21 */ + +/* ***************************************************************************** */ +#define DMA22_CNT2 0x1001D4 /* DMA Table Size : Ch#22 */ + +/* ***************************************************************************** */ +#define DMA23_CNT2 0x1001D8 /* DMA Table Size : Ch#23 */ + +/* ***************************************************************************** */ +#define DMA24_CNT2 0x1001DC /* DMA Table Size : Ch#24 */ + +/* ***************************************************************************** */ +#define DMA25_CNT2 0x1001E0 /* DMA Table Size : Ch#25 */ + +/* ***************************************************************************** */ +#define DMA26_CNT2 0x1001E4 /* DMA Table Size : Ch#26 */ + +/* ***************************************************************************** */ + /* ITG */ +/* ***************************************************************************** */ +#define TM_CNT_LDW 0x110000 /* Timer : Counter low */ + +/* ***************************************************************************** */ +#define TM_CNT_UW 0x110004 /* Timer : Counter high word */ + +/* ***************************************************************************** */ +#define TM_LMT_LDW 0x110008 /* Timer : Limit low */ + +/* ***************************************************************************** */ +#define TM_LMT_UW 0x11000C /* Timer : Limit high word */ + +/* ***************************************************************************** */ +#define GP0_IO 0x110010 /* GPIO output enables data I/O */ +#define FLD_GP_OE 0x00FF0000 /* GPIO: GP_OE output enable */ +#define FLD_GP_IN 0x0000FF00 /* GPIO: GP_IN status */ +#define FLD_GP_OUT 0x000000FF /* GPIO: GP_OUT control */ + +/* ***************************************************************************** */ +#define GPIO_ISM 0x110014 /* GPIO interrupt sensitivity mode */ +#define FLD_GP_ISM_SNS 0x00000070 +#define FLD_GP_ISM_POL 0x00000007 + +/* ***************************************************************************** */ +#define SOFT_RESET 0x11001C /* Output system reset reg */ +#define FLD_PECOS_SOFT_RESET 0x00000001 + +/* ***************************************************************************** */ +#define MC416_RWD 0x110020 /* MC416 GPIO[18:3] pin */ +#define MC416_OEN 0x110024 /* Output enable of GPIO[18:3] */ +#define MC416_CTL 0x110028 + +/* ***************************************************************************** */ +#define ALT_PIN_OUT_SEL 0x11002C /* Alternate GPIO output select */ + +#define FLD_ALT_GPIO_OUT_SEL 0xF0000000 +/* 0 Disabled <-- default */ +/* 1 GPIO[0] */ +/* 2 GPIO[10] */ +/* 3 VIP_656_DATA_VAL */ +/* 4 VIP_656_DATA[0] */ +/* 5 VIP_656_CLK */ +/* 6 VIP_656_DATA_EXT[1] */ +/* 7 VIP_656_DATA_EXT[0] */ +/* 8 ATT_IF */ + +#define FLD_AUX_PLL_CLK_ALT_SEL 0x0F000000 +/* 0 AUX_PLL_CLK<-- default */ +/* 1 GPIO[2] */ +/* 2 GPIO[10] */ +/* 3 VIP_656_DATA_VAL */ +/* 4 VIP_656_DATA[0] */ +/* 5 VIP_656_CLK */ +/* 6 VIP_656_DATA_EXT[1] */ +/* 7 VIP_656_DATA_EXT[0] */ + +#define FLD_IR_TX_ALT_SEL 0x00F00000 +/* 0 IR_TX <-- default */ +/* 1 GPIO[1] */ +/* 2 GPIO[10] */ +/* 3 VIP_656_DATA_VAL */ +/* 4 VIP_656_DATA[0] */ +/* 5 VIP_656_CLK */ +/* 6 VIP_656_DATA_EXT[1] */ +/* 7 VIP_656_DATA_EXT[0] */ + +#define FLD_IR_RX_ALT_SEL 0x000F0000 +/* 0 IR_RX <-- default */ +/* 1 GPIO[0] */ +/* 2 GPIO[10] */ +/* 3 VIP_656_DATA_VAL */ +/* 4 VIP_656_DATA[0] */ +/* 5 VIP_656_CLK */ +/* 6 VIP_656_DATA_EXT[1] */ +/* 7 VIP_656_DATA_EXT[0] */ + +#define FLD_GPIO10_ALT_SEL 0x0000F000 +/* 0 GPIO[10] <-- default */ +/* 1 GPIO[0] */ +/* 2 GPIO[10] */ +/* 3 VIP_656_DATA_VAL */ +/* 4 VIP_656_DATA[0] */ +/* 5 VIP_656_CLK */ +/* 6 VIP_656_DATA_EXT[1] */ +/* 7 VIP_656_DATA_EXT[0] */ + +#define FLD_GPIO2_ALT_SEL 0x00000F00 +/* 0 GPIO[2] <-- default */ +/* 1 GPIO[1] */ +/* 2 GPIO[10] */ +/* 3 VIP_656_DATA_VAL */ +/* 4 VIP_656_DATA[0] */ +/* 5 VIP_656_CLK */ +/* 6 VIP_656_DATA_EXT[1] */ +/* 7 VIP_656_DATA_EXT[0] */ + +#define FLD_GPIO1_ALT_SEL 0x000000F0 +/* 0 GPIO[1] <-- default */ +/* 1 GPIO[0] */ +/* 2 GPIO[10] */ +/* 3 VIP_656_DATA_VAL */ +/* 4 VIP_656_DATA[0] */ +/* 5 VIP_656_CLK */ +/* 6 VIP_656_DATA_EXT[1] */ +/* 7 VIP_656_DATA_EXT[0] */ + +#define FLD_GPIO0_ALT_SEL 0x0000000F +/* 0 GPIO[0] <-- default */ +/* 1 GPIO[1] */ +/* 2 GPIO[10] */ +/* 3 VIP_656_DATA_VAL */ +/* 4 VIP_656_DATA[0] */ +/* 5 VIP_656_CLK */ +/* 6 VIP_656_DATA_EXT[1] */ +/* 7 VIP_656_DATA_EXT[0] */ + +#define ALT_PIN_IN_SEL 0x110030 /* Alternate GPIO input select */ + +#define FLD_GPIO10_ALT_IN_SEL 0x0000F000 +/* 0 GPIO[10] <-- default */ +/* 1 IR_RX */ +/* 2 IR_TX */ +/* 3 AUX_PLL_CLK */ +/* 4 IF_ATT_SEL */ +/* 5 GPIO[0] */ +/* 6 GPIO[1] */ +/* 7 GPIO[2] */ + +#define FLD_GPIO2_ALT_IN_SEL 0x00000F00 +/* 0 GPIO[2] <-- default */ +/* 1 IR_RX */ +/* 2 IR_TX */ +/* 3 AUX_PLL_CLK */ +/* 4 IF_ATT_SEL */ + +#define FLD_GPIO1_ALT_IN_SEL 0x000000F0 +/* 0 GPIO[1] <-- default */ +/* 1 IR_RX */ +/* 2 IR_TX */ +/* 3 AUX_PLL_CLK */ +/* 4 IF_ATT_SEL */ + +#define FLD_GPIO0_ALT_IN_SEL 0x0000000F +/* 0 GPIO[0] <-- default */ +/* 1 IR_RX */ +/* 2 IR_TX */ +/* 3 AUX_PLL_CLK */ +/* 4 IF_ATT_SEL */ + +/* ***************************************************************************** */ +#define TEST_BUS_CTL1 0x110040 /* Test bus control register #1 */ + +/* ***************************************************************************** */ +#define TEST_BUS_CTL2 0x110044 /* Test bus control register #2 */ + +/* ***************************************************************************** */ +#define CLK_DELAY 0x110048 /* Clock delay */ +#define FLD_MOE_CLK_DIS 0x80000000 /* Disable MoE clock */ + +/* ***************************************************************************** */ +#define PAD_CTRL 0x110068 /* Pad drive strength control */ + +/* ***************************************************************************** */ +#define MBIST_CTRL 0x110050 /* SRAM memory built-in self test control */ + +/* ***************************************************************************** */ +#define MBIST_STAT 0x110054 /* SRAM memory built-in self test status */ + +/* ***************************************************************************** */ +/* PLL registers */ +/* ***************************************************************************** */ +#define PLL_A_INT_FRAC 0x110088 +#define PLL_A_POST_STAT_BIST 0x11008C +#define PLL_B_INT_FRAC 0x110090 +#define PLL_B_POST_STAT_BIST 0x110094 +#define PLL_C_INT_FRAC 0x110098 +#define PLL_C_POST_STAT_BIST 0x11009C +#define PLL_D_INT_FRAC 0x1100A0 +#define PLL_D_POST_STAT_BIST 0x1100A4 + +#define CLK_RST 0x11002C +#define FLD_VID_I_CLK_NOE 0x00001000 +#define FLD_VID_J_CLK_NOE 0x00002000 +#define FLD_USE_ALT_PLL_REF 0x00004000 + +#define VID_CH_MODE_SEL 0x110078 +#define VID_CH_CLK_SEL 0x11007C + +/* ***************************************************************************** */ +#define VBI_A_DMA 0x130008 /* VBI A DMA data port */ + +/* ***************************************************************************** */ +#define VID_A_VIP_CTL 0x130080 /* Video A VIP format control */ +#define FLD_VIP_MODE 0x00000001 + +/* ***************************************************************************** */ +#define VID_A_PIXEL_FRMT 0x130084 /* Video A pixel format */ +#define FLD_VID_A_GAMMA_DIS 0x00000008 +#define FLD_VID_A_FORMAT 0x00000007 +#define FLD_VID_A_GAMMA_FACTOR 0x00000010 + +/* ***************************************************************************** */ +#define VID_A_VBI_CTL 0x130088 /* Video A VBI miscellaneous control */ +#define FLD_VID_A_VIP_EXT 0x00000003 + +/* ***************************************************************************** */ +#define VID_B_DMA 0x130100 /* Video B DMA data port */ + +/* ***************************************************************************** */ +#define VBI_B_DMA 0x130108 /* VBI B DMA data port */ + +/* ***************************************************************************** */ +#define VID_B_SRC_SEL 0x130144 /* Video B source select */ +#define FLD_VID_B_SRC_SEL 0x00000000 + +/* ***************************************************************************** */ +#define VID_B_LNGTH 0x130150 /* Video B line length */ +#define FLD_VID_B_LN_LNGTH 0x00000FFF + +/* ***************************************************************************** */ +#define VID_B_VIP_CTL 0x130180 /* Video B VIP format control */ + +/* ***************************************************************************** */ +#define VID_B_PIXEL_FRMT 0x130184 /* Video B pixel format */ +#define FLD_VID_B_GAMMA_DIS 0x00000008 +#define FLD_VID_B_FORMAT 0x00000007 +#define FLD_VID_B_GAMMA_FACTOR 0x00000010 + +/* ***************************************************************************** */ +#define VID_C_DMA 0x130200 /* Video C DMA data port */ + +/* ***************************************************************************** */ +#define VID_C_LNGTH 0x130250 /* Video C line length */ +#define FLD_VID_C_LN_LNGTH 0x00000FFF + +/* ***************************************************************************** */ +/* Video Destination Channels */ +/* ***************************************************************************** */ + +#define VID_DST_A_GPCNT 0x130020 /* Video A general purpose counter */ +#define VID_DST_B_GPCNT 0x130120 /* Video B general purpose counter */ +#define VID_DST_C_GPCNT 0x130220 /* Video C general purpose counter */ +#define VID_DST_D_GPCNT 0x130320 /* Video D general purpose counter */ +#define VID_DST_E_GPCNT 0x130420 /* Video E general purpose counter */ +#define VID_DST_F_GPCNT 0x130520 /* Video F general purpose counter */ +#define VID_DST_G_GPCNT 0x130620 /* Video G general purpose counter */ +#define VID_DST_H_GPCNT 0x130720 /* Video H general purpose counter */ + +/* ***************************************************************************** */ + +#define VID_DST_A_GPCNT_CTL 0x130030 /* Video A general purpose control */ +#define VID_DST_B_GPCNT_CTL 0x130130 /* Video B general purpose control */ +#define VID_DST_C_GPCNT_CTL 0x130230 /* Video C general purpose control */ +#define VID_DST_D_GPCNT_CTL 0x130330 /* Video D general purpose control */ +#define VID_DST_E_GPCNT_CTL 0x130430 /* Video E general purpose control */ +#define VID_DST_F_GPCNT_CTL 0x130530 /* Video F general purpose control */ +#define VID_DST_G_GPCNT_CTL 0x130630 /* Video G general purpose control */ +#define VID_DST_H_GPCNT_CTL 0x130730 /* Video H general purpose control */ + +/* ***************************************************************************** */ + +#define VID_DST_A_DMA_CTL 0x130040 /* Video A DMA control */ +#define VID_DST_B_DMA_CTL 0x130140 /* Video B DMA control */ +#define VID_DST_C_DMA_CTL 0x130240 /* Video C DMA control */ +#define VID_DST_D_DMA_CTL 0x130340 /* Video D DMA control */ +#define VID_DST_E_DMA_CTL 0x130440 /* Video E DMA control */ +#define VID_DST_F_DMA_CTL 0x130540 /* Video F DMA control */ +#define VID_DST_G_DMA_CTL 0x130640 /* Video G DMA control */ +#define VID_DST_H_DMA_CTL 0x130740 /* Video H DMA control */ + +#define FLD_VID_RISC_EN 0x00000010 +#define FLD_VID_FIFO_EN 0x00000001 + +/* ***************************************************************************** */ + +#define VID_DST_A_VIP_CTL 0x130080 /* Video A VIP control */ +#define VID_DST_B_VIP_CTL 0x130180 /* Video B VIP control */ +#define VID_DST_C_VIP_CTL 0x130280 /* Video C VIP control */ +#define VID_DST_D_VIP_CTL 0x130380 /* Video D VIP control */ +#define VID_DST_E_VIP_CTL 0x130480 /* Video E VIP control */ +#define VID_DST_F_VIP_CTL 0x130580 /* Video F VIP control */ +#define VID_DST_G_VIP_CTL 0x130680 /* Video G VIP control */ +#define VID_DST_H_VIP_CTL 0x130780 /* Video H VIP control */ + +/* ***************************************************************************** */ + +#define VID_DST_A_PIX_FRMT 0x130084 /* Video A Pixel format */ +#define VID_DST_B_PIX_FRMT 0x130184 /* Video B Pixel format */ +#define VID_DST_C_PIX_FRMT 0x130284 /* Video C Pixel format */ +#define VID_DST_D_PIX_FRMT 0x130384 /* Video D Pixel format */ +#define VID_DST_E_PIX_FRMT 0x130484 /* Video E Pixel format */ +#define VID_DST_F_PIX_FRMT 0x130584 /* Video F Pixel format */ +#define VID_DST_G_PIX_FRMT 0x130684 /* Video G Pixel format */ +#define VID_DST_H_PIX_FRMT 0x130784 /* Video H Pixel format */ + +/* ***************************************************************************** */ +/* Video Source Channels */ +/* ***************************************************************************** */ + +#define VID_SRC_A_GPCNT_CTL 0x130804 /* Video A general purpose control */ +#define VID_SRC_B_GPCNT_CTL 0x130904 /* Video B general purpose control */ +#define VID_SRC_C_GPCNT_CTL 0x130A04 /* Video C general purpose control */ +#define VID_SRC_D_GPCNT_CTL 0x130B04 /* Video D general purpose control */ +#define VID_SRC_E_GPCNT_CTL 0x130C04 /* Video E general purpose control */ +#define VID_SRC_F_GPCNT_CTL 0x130D04 /* Video F general purpose control */ +#define VID_SRC_I_GPCNT_CTL 0x130E04 /* Video I general purpose control */ +#define VID_SRC_J_GPCNT_CTL 0x130F04 /* Video J general purpose control */ + +/* ***************************************************************************** */ + +#define VID_SRC_A_GPCNT 0x130808 /* Video A general purpose counter */ +#define VID_SRC_B_GPCNT 0x130908 /* Video B general purpose counter */ +#define VID_SRC_C_GPCNT 0x130A08 /* Video C general purpose counter */ +#define VID_SRC_D_GPCNT 0x130B08 /* Video D general purpose counter */ +#define VID_SRC_E_GPCNT 0x130C08 /* Video E general purpose counter */ +#define VID_SRC_F_GPCNT 0x130D08 /* Video F general purpose counter */ +#define VID_SRC_I_GPCNT 0x130E08 /* Video I general purpose counter */ +#define VID_SRC_J_GPCNT 0x130F08 /* Video J general purpose counter */ + +/* ***************************************************************************** */ + +#define VID_SRC_A_DMA_CTL 0x13080C /* Video A DMA control */ +#define VID_SRC_B_DMA_CTL 0x13090C /* Video B DMA control */ +#define VID_SRC_C_DMA_CTL 0x130A0C /* Video C DMA control */ +#define VID_SRC_D_DMA_CTL 0x130B0C /* Video D DMA control */ +#define VID_SRC_E_DMA_CTL 0x130C0C /* Video E DMA control */ +#define VID_SRC_F_DMA_CTL 0x130D0C /* Video F DMA control */ +#define VID_SRC_I_DMA_CTL 0x130E0C /* Video I DMA control */ +#define VID_SRC_J_DMA_CTL 0x130F0C /* Video J DMA control */ + +#define FLD_APB_RISC_EN 0x00000010 +#define FLD_APB_FIFO_EN 0x00000001 + +/* ***************************************************************************** */ + +#define VID_SRC_A_FMT_CTL 0x130810 /* Video A format control */ +#define VID_SRC_B_FMT_CTL 0x130910 /* Video B format control */ +#define VID_SRC_C_FMT_CTL 0x130A10 /* Video C format control */ +#define VID_SRC_D_FMT_CTL 0x130B10 /* Video D format control */ +#define VID_SRC_E_FMT_CTL 0x130C10 /* Video E format control */ +#define VID_SRC_F_FMT_CTL 0x130D10 /* Video F format control */ +#define VID_SRC_I_FMT_CTL 0x130E10 /* Video I format control */ +#define VID_SRC_J_FMT_CTL 0x130F10 /* Video J format control */ + +/* ***************************************************************************** */ + +#define VID_SRC_A_ACTIVE_CTL1 0x130814 /* Video A active control 1 */ +#define VID_SRC_B_ACTIVE_CTL1 0x130914 /* Video B active control 1 */ +#define VID_SRC_C_ACTIVE_CTL1 0x130A14 /* Video C active control 1 */ +#define VID_SRC_D_ACTIVE_CTL1 0x130B14 /* Video D active control 1 */ +#define VID_SRC_E_ACTIVE_CTL1 0x130C14 /* Video E active control 1 */ +#define VID_SRC_F_ACTIVE_CTL1 0x130D14 /* Video F active control 1 */ +#define VID_SRC_I_ACTIVE_CTL1 0x130E14 /* Video I active control 1 */ +#define VID_SRC_J_ACTIVE_CTL1 0x130F14 /* Video J active control 1 */ + +/* ***************************************************************************** */ + +#define VID_SRC_A_ACTIVE_CTL2 0x130818 /* Video A active control 2 */ +#define VID_SRC_B_ACTIVE_CTL2 0x130918 /* Video B active control 2 */ +#define VID_SRC_C_ACTIVE_CTL2 0x130A18 /* Video C active control 2 */ +#define VID_SRC_D_ACTIVE_CTL2 0x130B18 /* Video D active control 2 */ +#define VID_SRC_E_ACTIVE_CTL2 0x130C18 /* Video E active control 2 */ +#define VID_SRC_F_ACTIVE_CTL2 0x130D18 /* Video F active control 2 */ +#define VID_SRC_I_ACTIVE_CTL2 0x130E18 /* Video I active control 2 */ +#define VID_SRC_J_ACTIVE_CTL2 0x130F18 /* Video J active control 2 */ + +/* ***************************************************************************** */ + +#define VID_SRC_A_CDT_SZ 0x13081C /* Video A CDT size */ +#define VID_SRC_B_CDT_SZ 0x13091C /* Video B CDT size */ +#define VID_SRC_C_CDT_SZ 0x130A1C /* Video C CDT size */ +#define VID_SRC_D_CDT_SZ 0x130B1C /* Video D CDT size */ +#define VID_SRC_E_CDT_SZ 0x130C1C /* Video E CDT size */ +#define VID_SRC_F_CDT_SZ 0x130D1C /* Video F CDT size */ +#define VID_SRC_I_CDT_SZ 0x130E1C /* Video I CDT size */ +#define VID_SRC_J_CDT_SZ 0x130F1C /* Video J CDT size */ + +/* ***************************************************************************** */ +/* Audio I/F */ +/* ***************************************************************************** */ +#define AUD_DST_A_DMA 0x140000 /* Audio Int A DMA data port */ +#define AUD_SRC_A_DMA 0x140008 /* Audio Int A DMA data port */ + +#define AUD_A_GPCNT 0x140010 /* Audio Int A gp counter */ +#define FLD_AUD_A_GP_CNT 0x0000FFFF + +#define AUD_A_GPCNT_CTL 0x140014 /* Audio Int A gp control */ + +#define AUD_A_LNGTH 0x140018 /* Audio Int A line length */ + +#define AUD_A_CFG 0x14001C /* Audio Int A configuration */ + +/* ***************************************************************************** */ +#define AUD_DST_B_DMA 0x140100 /* Audio Int B DMA data port */ +#define AUD_SRC_B_DMA 0x140108 /* Audio Int B DMA data port */ + +#define AUD_B_GPCNT 0x140110 /* Audio Int B gp counter */ +#define FLD_AUD_B_GP_CNT 0x0000FFFF + +#define AUD_B_GPCNT_CTL 0x140114 /* Audio Int B gp control */ + +#define AUD_B_LNGTH 0x140118 /* Audio Int B line length */ + +#define AUD_B_CFG 0x14011C /* Audio Int B configuration */ + +/* ***************************************************************************** */ +#define AUD_DST_C_DMA 0x140200 /* Audio Int C DMA data port */ +#define AUD_SRC_C_DMA 0x140208 /* Audio Int C DMA data port */ + +#define AUD_C_GPCNT 0x140210 /* Audio Int C gp counter */ +#define FLD_AUD_C_GP_CNT 0x0000FFFF + +#define AUD_C_GPCNT_CTL 0x140214 /* Audio Int C gp control */ + +#define AUD_C_LNGTH 0x140218 /* Audio Int C line length */ + +#define AUD_C_CFG 0x14021C /* Audio Int C configuration */ + +/* ***************************************************************************** */ +#define AUD_DST_D_DMA 0x140300 /* Audio Int D DMA data port */ +#define AUD_SRC_D_DMA 0x140308 /* Audio Int D DMA data port */ + +#define AUD_D_GPCNT 0x140310 /* Audio Int D gp counter */ +#define FLD_AUD_D_GP_CNT 0x0000FFFF + +#define AUD_D_GPCNT_CTL 0x140314 /* Audio Int D gp control */ + +#define AUD_D_LNGTH 0x140318 /* Audio Int D line length */ + +#define AUD_D_CFG 0x14031C /* Audio Int D configuration */ + +/* ***************************************************************************** */ +#define AUD_SRC_E_DMA 0x140400 /* Audio Int E DMA data port */ + +#define AUD_E_GPCNT 0x140410 /* Audio Int E gp counter */ +#define FLD_AUD_E_GP_CNT 0x0000FFFF + +#define AUD_E_GPCNT_CTL 0x140414 /* Audio Int E gp control */ + +#define AUD_E_CFG 0x14041C /* Audio Int E configuration */ + +/* ***************************************************************************** */ + +#define FLD_AUD_DST_LN_LNGTH 0x00000FFF + +#define FLD_AUD_DST_PK_MODE 0x00004000 + +#define FLD_AUD_CLK_ENABLE 0x00000200 + +#define FLD_AUD_MASTER_MODE 0x00000002 + +#define FLD_AUD_SONY_MODE 0x00000001 + +#define FLD_AUD_CLK_SELECT_PLL_D 0x00001800 + +#define FLD_AUD_DST_ENABLE 0x00020000 + +#define FLD_AUD_SRC_ENABLE 0x00010000 + +/* ***************************************************************************** */ +#define AUD_INT_DMA_CTL 0x140500 /* Audio Int DMA control */ + +#define FLD_AUD_SRC_E_RISC_EN 0x00008000 +#define FLD_AUD_SRC_C_RISC_EN 0x00004000 +#define FLD_AUD_SRC_B_RISC_EN 0x00002000 +#define FLD_AUD_SRC_A_RISC_EN 0x00001000 + +#define FLD_AUD_DST_D_RISC_EN 0x00000800 +#define FLD_AUD_DST_C_RISC_EN 0x00000400 +#define FLD_AUD_DST_B_RISC_EN 0x00000200 +#define FLD_AUD_DST_A_RISC_EN 0x00000100 + +#define FLD_AUD_SRC_E_FIFO_EN 0x00000080 +#define FLD_AUD_SRC_C_FIFO_EN 0x00000040 +#define FLD_AUD_SRC_B_FIFO_EN 0x00000020 +#define FLD_AUD_SRC_A_FIFO_EN 0x00000010 + +#define FLD_AUD_DST_D_FIFO_EN 0x00000008 +#define FLD_AUD_DST_C_FIFO_EN 0x00000004 +#define FLD_AUD_DST_B_FIFO_EN 0x00000002 +#define FLD_AUD_DST_A_FIFO_EN 0x00000001 + +/* ***************************************************************************** */ +/* */ +/* Mobilygen Interface Registers */ +/* */ +/* ***************************************************************************** */ +/* Mobilygen Interface A */ +/* ***************************************************************************** */ +#define MB_IF_A_DMA 0x150000 /* MBIF A DMA data port */ +#define MB_IF_A_GPCN 0x150008 /* MBIF A GP counter */ +#define MB_IF_A_GPCN_CTRL 0x15000C +#define MB_IF_A_DMA_CTRL 0x150010 +#define MB_IF_A_LENGTH 0x150014 +#define MB_IF_A_HDMA_XFER_SZ 0x150018 +#define MB_IF_A_HCMD 0x15001C +#define MB_IF_A_HCONFIG 0x150020 +#define MB_IF_A_DATA_STRUCT_0 0x150024 +#define MB_IF_A_DATA_STRUCT_1 0x150028 +#define MB_IF_A_DATA_STRUCT_2 0x15002C +#define MB_IF_A_DATA_STRUCT_3 0x150030 +#define MB_IF_A_DATA_STRUCT_4 0x150034 +#define MB_IF_A_DATA_STRUCT_5 0x150038 +#define MB_IF_A_DATA_STRUCT_6 0x15003C +#define MB_IF_A_DATA_STRUCT_7 0x150040 +#define MB_IF_A_DATA_STRUCT_8 0x150044 +#define MB_IF_A_DATA_STRUCT_9 0x150048 +#define MB_IF_A_DATA_STRUCT_A 0x15004C +#define MB_IF_A_DATA_STRUCT_B 0x150050 +#define MB_IF_A_DATA_STRUCT_C 0x150054 +#define MB_IF_A_DATA_STRUCT_D 0x150058 +#define MB_IF_A_DATA_STRUCT_E 0x15005C +#define MB_IF_A_DATA_STRUCT_F 0x150060 +/* ***************************************************************************** */ +/* Mobilygen Interface B */ +/* ***************************************************************************** */ +#define MB_IF_B_DMA 0x160000 /* MBIF A DMA data port */ +#define MB_IF_B_GPCN 0x160008 /* MBIF A GP counter */ +#define MB_IF_B_GPCN_CTRL 0x16000C +#define MB_IF_B_DMA_CTRL 0x160010 +#define MB_IF_B_LENGTH 0x160014 +#define MB_IF_B_HDMA_XFER_SZ 0x160018 +#define MB_IF_B_HCMD 0x16001C +#define MB_IF_B_HCONFIG 0x160020 +#define MB_IF_B_DATA_STRUCT_0 0x160024 +#define MB_IF_B_DATA_STRUCT_1 0x160028 +#define MB_IF_B_DATA_STRUCT_2 0x16002C +#define MB_IF_B_DATA_STRUCT_3 0x160030 +#define MB_IF_B_DATA_STRUCT_4 0x160034 +#define MB_IF_B_DATA_STRUCT_5 0x160038 +#define MB_IF_B_DATA_STRUCT_6 0x16003C +#define MB_IF_B_DATA_STRUCT_7 0x160040 +#define MB_IF_B_DATA_STRUCT_8 0x160044 +#define MB_IF_B_DATA_STRUCT_9 0x160048 +#define MB_IF_B_DATA_STRUCT_A 0x16004C +#define MB_IF_B_DATA_STRUCT_B 0x160050 +#define MB_IF_B_DATA_STRUCT_C 0x160054 +#define MB_IF_B_DATA_STRUCT_D 0x160058 +#define MB_IF_B_DATA_STRUCT_E 0x16005C +#define MB_IF_B_DATA_STRUCT_F 0x160060 + +/* MB_DMA_CTRL */ +#define FLD_MB_IF_RISC_EN 0x00000010 +#define FLD_MB_IF_FIFO_EN 0x00000001 + +/* MB_LENGTH */ +#define FLD_MB_IF_LN_LNGTH 0x00000FFF + +/* MB_HCMD register */ +#define FLD_MB_HCMD_H_GO 0x80000000 +#define FLD_MB_HCMD_H_BUSY 0x40000000 +#define FLD_MB_HCMD_H_DMA_HOLD 0x10000000 +#define FLD_MB_HCMD_H_DMA_BUSY 0x08000000 +#define FLD_MB_HCMD_H_DMA_TYPE 0x04000000 +#define FLD_MB_HCMD_H_DMA_XACT 0x02000000 +#define FLD_MB_HCMD_H_RW_N 0x01000000 +#define FLD_MB_HCMD_H_ADDR 0x00FF0000 +#define FLD_MB_HCMD_H_DATA 0x0000FFFF + +/* ***************************************************************************** */ +/* I2C #1 */ +/* ***************************************************************************** */ +#define I2C1_ADDR 0x180000 /* I2C #1 address */ +#define FLD_I2C_DADDR 0xfe000000 /* RW [31:25] I2C Device Address */ + /* RO [24] reserved */ +/* ***************************************************************************** */ +#define FLD_I2C_SADDR 0x00FFFFFF /* RW [23:0] I2C Sub-address */ + +/* ***************************************************************************** */ +#define I2C1_WDATA 0x180004 /* I2C #1 write data */ +#define FLD_I2C_WDATA 0xFFFFFFFF /* RW [31:0] */ + +/* ***************************************************************************** */ +#define I2C1_CTRL 0x180008 /* I2C #1 control */ +#define FLD_I2C_PERIOD 0xFF000000 /* RW [31:24] */ +#define FLD_I2C_SCL_IN 0x00200000 /* RW [21] */ +#define FLD_I2C_SDA_IN 0x00100000 /* RW [20] */ + /* RO [19:18] reserved */ +#define FLD_I2C_SCL_OUT 0x00020000 /* RW [17] */ +#define FLD_I2C_SDA_OUT 0x00010000 /* RW [16] */ + /* RO [15] reserved */ +#define FLD_I2C_DATA_LEN 0x00007000 /* RW [14:12] */ +#define FLD_I2C_SADDR_INC 0x00000800 /* RW [11] */ + /* RO [10:9] reserved */ +#define FLD_I2C_SADDR_LEN 0x00000300 /* RW [9:8] */ + /* RO [7:6] reserved */ +#define FLD_I2C_SOFT 0x00000020 /* RW [5] */ +#define FLD_I2C_NOSTOP 0x00000010 /* RW [4] */ +#define FLD_I2C_EXTEND 0x00000008 /* RW [3] */ +#define FLD_I2C_SYNC 0x00000004 /* RW [2] */ +#define FLD_I2C_READ_SA 0x00000002 /* RW [1] */ +#define FLD_I2C_READ_WRN 0x00000001 /* RW [0] */ + +/* ***************************************************************************** */ +#define I2C1_RDATA 0x18000C /* I2C #1 read data */ +#define FLD_I2C_RDATA 0xFFFFFFFF /* RO [31:0] */ + +/* ***************************************************************************** */ +#define I2C1_STAT 0x180010 /* I2C #1 status */ +#define FLD_I2C_XFER_IN_PROG 0x00000002 /* RO [1] */ +#define FLD_I2C_RACK 0x00000001 /* RO [0] */ + +/* ***************************************************************************** */ +/* I2C #2 */ +/* ***************************************************************************** */ +#define I2C2_ADDR 0x190000 /* I2C #2 address */ + +/* ***************************************************************************** */ +#define I2C2_WDATA 0x190004 /* I2C #2 write data */ + +/* ***************************************************************************** */ +#define I2C2_CTRL 0x190008 /* I2C #2 control */ + +/* ***************************************************************************** */ +#define I2C2_RDATA 0x19000C /* I2C #2 read data */ + +/* ***************************************************************************** */ +#define I2C2_STAT 0x190010 /* I2C #2 status */ + +/* ***************************************************************************** */ +/* I2C #3 */ +/* ***************************************************************************** */ +#define I2C3_ADDR 0x1A0000 /* I2C #3 address */ + +/* ***************************************************************************** */ +#define I2C3_WDATA 0x1A0004 /* I2C #3 write data */ + +/* ***************************************************************************** */ +#define I2C3_CTRL 0x1A0008 /* I2C #3 control */ + +/* ***************************************************************************** */ +#define I2C3_RDATA 0x1A000C /* I2C #3 read data */ + +/* ***************************************************************************** */ +#define I2C3_STAT 0x1A0010 /* I2C #3 status */ + +/* ***************************************************************************** */ +/* UART */ +/* ***************************************************************************** */ +#define UART_CTL 0x1B0000 /* UART Control Register */ +#define FLD_LOOP_BACK_EN (1 << 7) /* RW field - default 0 */ +#define FLD_RX_TRG_SZ (3 << 2) /* RW field - default 0 */ +#define FLD_RX_EN (1 << 1) /* RW field - default 0 */ +#define FLD_TX_EN (1 << 0) /* RW field - default 0 */ + +/* ***************************************************************************** */ +#define UART_BRD 0x1B0004 /* UART Baud Rate Divisor */ +#define FLD_BRD 0x0000FFFF /* RW field - default 0x197 */ + +/* ***************************************************************************** */ +#define UART_DBUF 0x1B0008 /* UART Tx/Rx Data BuFFer */ +#define FLD_DB 0xFFFFFFFF /* RW field - default 0 */ + +/* ***************************************************************************** */ +#define UART_ISR 0x1B000C /* UART Interrupt Status */ +#define FLD_RXD_TIMEOUT_EN (1 << 7) /* RW field - default 0 */ +#define FLD_FRM_ERR_EN (1 << 6) /* RW field - default 0 */ +#define FLD_RXD_RDY_EN (1 << 5) /* RW field - default 0 */ +#define FLD_TXD_EMPTY_EN (1 << 4) /* RW field - default 0 */ +#define FLD_RXD_OVERFLOW (1 << 3) /* RW field - default 0 */ +#define FLD_FRM_ERR (1 << 2) /* RW field - default 0 */ +#define FLD_RXD_RDY (1 << 1) /* RW field - default 0 */ +#define FLD_TXD_EMPTY (1 << 0) /* RW field - default 0 */ + +/* ***************************************************************************** */ +#define UART_CNT 0x1B0010 /* UART Tx/Rx FIFO Byte Count */ +#define FLD_TXD_CNT (0x1F << 8) /* RW field - default 0 */ +#define FLD_RXD_CNT (0x1F << 0) /* RW field - default 0 */ + +/* ***************************************************************************** */ +/* Motion Detection */ +#define MD_CH0_GRID_BLOCK_YCNT 0x170014 +#define MD_CH1_GRID_BLOCK_YCNT 0x170094 +#define MD_CH2_GRID_BLOCK_YCNT 0x170114 +#define MD_CH3_GRID_BLOCK_YCNT 0x170194 +#define MD_CH4_GRID_BLOCK_YCNT 0x170214 +#define MD_CH5_GRID_BLOCK_YCNT 0x170294 +#define MD_CH6_GRID_BLOCK_YCNT 0x170314 +#define MD_CH7_GRID_BLOCK_YCNT 0x170394 + +#define PIXEL_FRMT_422 4 +#define PIXEL_FRMT_411 5 +#define PIXEL_FRMT_Y8 6 + +#define PIXEL_ENGINE_VIP1 0 +#define PIXEL_ENGINE_VIP2 1 + +#endif /* Athena_REGISTERS */ diff --git a/drivers/media/pci/cx25821/cx25821-sram.h b/drivers/media/pci/cx25821/cx25821-sram.h new file mode 100644 index 00000000..5f05d153 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-sram.h @@ -0,0 +1,261 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ATHENA_SRAM_H__ +#define __ATHENA_SRAM_H__ + +/* #define RX_SRAM_START_SIZE = 0; // Start of reserved SRAM */ +#define VID_CMDS_SIZE 80 /* Video CMDS size in bytes */ +#define AUDIO_CMDS_SIZE 80 /* AUDIO CMDS size in bytes */ +#define MBIF_CMDS_SIZE 80 /* MBIF CMDS size in bytes */ + +/* #define RX_SRAM_POOL_START_SIZE = 0; // Start of useable RX SRAM for buffers */ +#define VID_IQ_SIZE 64 /* VID instruction queue size in bytes */ +#define MBIF_IQ_SIZE 64 +#define AUDIO_IQ_SIZE 64 /* AUD instruction queue size in bytes */ + +#define VID_CDT_SIZE 64 /* VID cluster descriptor table size in bytes */ +#define MBIF_CDT_SIZE 64 /* MBIF/HBI cluster descriptor table size in bytes */ +#define AUDIO_CDT_SIZE 48 /* AUD cluster descriptor table size in bytes */ + +/* #define RX_SRAM_POOL_FREE_SIZE = 16; // Start of available RX SRAM */ +/* #define RX_SRAM_END_SIZE = 0; // End of RX SRAM */ + +/* #define TX_SRAM_POOL_START_SIZE = 0; // Start of transmit pool SRAM */ +/* #define MSI_DATA_SIZE = 64; // Reserved (MSI Data, RISC working stora */ + +#define VID_CLUSTER_SIZE 1440 /* VID cluster data line */ +#define AUDIO_CLUSTER_SIZE 128 /* AUDIO cluster data line */ +#define MBIF_CLUSTER_SIZE 1440 /* MBIF/HBI cluster data line */ + +/* #define TX_SRAM_POOL_FREE_SIZE = 704; // Start of available TX SRAM */ +/* #define TX_SRAM_END_SIZE = 0; // End of TX SRAM */ + +/* Receive SRAM */ +#define RX_SRAM_START 0x10000 +#define VID_A_DOWN_CMDS 0x10000 +#define VID_B_DOWN_CMDS 0x10050 +#define VID_C_DOWN_CMDS 0x100A0 +#define VID_D_DOWN_CMDS 0x100F0 +#define VID_E_DOWN_CMDS 0x10140 +#define VID_F_DOWN_CMDS 0x10190 +#define VID_G_DOWN_CMDS 0x101E0 +#define VID_H_DOWN_CMDS 0x10230 +#define VID_A_UP_CMDS 0x10280 +#define VID_B_UP_CMDS 0x102D0 +#define VID_C_UP_CMDS 0x10320 +#define VID_D_UP_CMDS 0x10370 +#define VID_E_UP_CMDS 0x103C0 +#define VID_F_UP_CMDS 0x10410 +#define VID_I_UP_CMDS 0x10460 +#define VID_J_UP_CMDS 0x104B0 +#define AUD_A_DOWN_CMDS 0x10500 +#define AUD_B_DOWN_CMDS 0x10550 +#define AUD_C_DOWN_CMDS 0x105A0 +#define AUD_D_DOWN_CMDS 0x105F0 +#define AUD_A_UP_CMDS 0x10640 +#define AUD_B_UP_CMDS 0x10690 +#define AUD_C_UP_CMDS 0x106E0 +#define AUD_E_UP_CMDS 0x10730 +#define MBIF_A_DOWN_CMDS 0x10780 +#define MBIF_B_DOWN_CMDS 0x107D0 +#define DMA_SCRATCH_PAD 0x10820 /* Scratch pad area from 0x10820 to 0x10B40 */ + +/* #define RX_SRAM_POOL_START = 0x105B0; */ + +#define VID_A_IQ 0x11000 +#define VID_B_IQ 0x11040 +#define VID_C_IQ 0x11080 +#define VID_D_IQ 0x110C0 +#define VID_E_IQ 0x11100 +#define VID_F_IQ 0x11140 +#define VID_G_IQ 0x11180 +#define VID_H_IQ 0x111C0 +#define VID_I_IQ 0x11200 +#define VID_J_IQ 0x11240 +#define AUD_A_IQ 0x11280 +#define AUD_B_IQ 0x112C0 +#define AUD_C_IQ 0x11300 +#define AUD_D_IQ 0x11340 +#define AUD_E_IQ 0x11380 +#define MBIF_A_IQ 0x11000 +#define MBIF_B_IQ 0x110C0 + +#define VID_A_CDT 0x10C00 +#define VID_B_CDT 0x10C40 +#define VID_C_CDT 0x10C80 +#define VID_D_CDT 0x10CC0 +#define VID_E_CDT 0x10D00 +#define VID_F_CDT 0x10D40 +#define VID_G_CDT 0x10D80 +#define VID_H_CDT 0x10DC0 +#define VID_I_CDT 0x10E00 +#define VID_J_CDT 0x10E40 +#define AUD_A_CDT 0x10E80 +#define AUD_B_CDT 0x10EB0 +#define AUD_C_CDT 0x10EE0 +#define AUD_D_CDT 0x10F10 +#define AUD_E_CDT 0x10F40 +#define MBIF_A_CDT 0x10C00 +#define MBIF_B_CDT 0x10CC0 + +/* Cluster Buffer for RX */ +#define VID_A_UP_CLUSTER_1 0x11400 +#define VID_A_UP_CLUSTER_2 0x119A0 +#define VID_A_UP_CLUSTER_3 0x11F40 +#define VID_A_UP_CLUSTER_4 0x124E0 + +#define VID_B_UP_CLUSTER_1 0x12A80 +#define VID_B_UP_CLUSTER_2 0x13020 +#define VID_B_UP_CLUSTER_3 0x135C0 +#define VID_B_UP_CLUSTER_4 0x13B60 + +#define VID_C_UP_CLUSTER_1 0x14100 +#define VID_C_UP_CLUSTER_2 0x146A0 +#define VID_C_UP_CLUSTER_3 0x14C40 +#define VID_C_UP_CLUSTER_4 0x151E0 + +#define VID_D_UP_CLUSTER_1 0x15780 +#define VID_D_UP_CLUSTER_2 0x15D20 +#define VID_D_UP_CLUSTER_3 0x162C0 +#define VID_D_UP_CLUSTER_4 0x16860 + +#define VID_E_UP_CLUSTER_1 0x16E00 +#define VID_E_UP_CLUSTER_2 0x173A0 +#define VID_E_UP_CLUSTER_3 0x17940 +#define VID_E_UP_CLUSTER_4 0x17EE0 + +#define VID_F_UP_CLUSTER_1 0x18480 +#define VID_F_UP_CLUSTER_2 0x18A20 +#define VID_F_UP_CLUSTER_3 0x18FC0 +#define VID_F_UP_CLUSTER_4 0x19560 + +#define VID_I_UP_CLUSTER_1 0x19B00 +#define VID_I_UP_CLUSTER_2 0x1A0A0 +#define VID_I_UP_CLUSTER_3 0x1A640 +#define VID_I_UP_CLUSTER_4 0x1ABE0 + +#define VID_J_UP_CLUSTER_1 0x1B180 +#define VID_J_UP_CLUSTER_2 0x1B720 +#define VID_J_UP_CLUSTER_3 0x1BCC0 +#define VID_J_UP_CLUSTER_4 0x1C260 + +#define AUD_A_UP_CLUSTER_1 0x1C800 +#define AUD_A_UP_CLUSTER_2 0x1C880 +#define AUD_A_UP_CLUSTER_3 0x1C900 + +#define AUD_B_UP_CLUSTER_1 0x1C980 +#define AUD_B_UP_CLUSTER_2 0x1CA00 +#define AUD_B_UP_CLUSTER_3 0x1CA80 + +#define AUD_C_UP_CLUSTER_1 0x1CB00 +#define AUD_C_UP_CLUSTER_2 0x1CB80 +#define AUD_C_UP_CLUSTER_3 0x1CC00 + +#define AUD_E_UP_CLUSTER_1 0x1CC80 +#define AUD_E_UP_CLUSTER_2 0x1CD00 +#define AUD_E_UP_CLUSTER_3 0x1CD80 + +#define RX_SRAM_POOL_FREE 0x1CE00 +#define RX_SRAM_END 0x1D000 + +/* Free Receive SRAM 144 Bytes */ + +/* Transmit SRAM */ +#define TX_SRAM_POOL_START 0x00000 + +#define VID_A_DOWN_CLUSTER_1 0x00040 +#define VID_A_DOWN_CLUSTER_2 0x005E0 +#define VID_A_DOWN_CLUSTER_3 0x00B80 +#define VID_A_DOWN_CLUSTER_4 0x01120 + +#define VID_B_DOWN_CLUSTER_1 0x016C0 +#define VID_B_DOWN_CLUSTER_2 0x01C60 +#define VID_B_DOWN_CLUSTER_3 0x02200 +#define VID_B_DOWN_CLUSTER_4 0x027A0 + +#define VID_C_DOWN_CLUSTER_1 0x02D40 +#define VID_C_DOWN_CLUSTER_2 0x032E0 +#define VID_C_DOWN_CLUSTER_3 0x03880 +#define VID_C_DOWN_CLUSTER_4 0x03E20 + +#define VID_D_DOWN_CLUSTER_1 0x043C0 +#define VID_D_DOWN_CLUSTER_2 0x04960 +#define VID_D_DOWN_CLUSTER_3 0x04F00 +#define VID_D_DOWN_CLUSTER_4 0x054A0 + +#define VID_E_DOWN_CLUSTER_1 0x05a40 +#define VID_E_DOWN_CLUSTER_2 0x05FE0 +#define VID_E_DOWN_CLUSTER_3 0x06580 +#define VID_E_DOWN_CLUSTER_4 0x06B20 + +#define VID_F_DOWN_CLUSTER_1 0x070C0 +#define VID_F_DOWN_CLUSTER_2 0x07660 +#define VID_F_DOWN_CLUSTER_3 0x07C00 +#define VID_F_DOWN_CLUSTER_4 0x081A0 + +#define VID_G_DOWN_CLUSTER_1 0x08740 +#define VID_G_DOWN_CLUSTER_2 0x08CE0 +#define VID_G_DOWN_CLUSTER_3 0x09280 +#define VID_G_DOWN_CLUSTER_4 0x09820 + +#define VID_H_DOWN_CLUSTER_1 0x09DC0 +#define VID_H_DOWN_CLUSTER_2 0x0A360 +#define VID_H_DOWN_CLUSTER_3 0x0A900 +#define VID_H_DOWN_CLUSTER_4 0x0AEA0 + +#define AUD_A_DOWN_CLUSTER_1 0x0B500 +#define AUD_A_DOWN_CLUSTER_2 0x0B580 +#define AUD_A_DOWN_CLUSTER_3 0x0B600 + +#define AUD_B_DOWN_CLUSTER_1 0x0B680 +#define AUD_B_DOWN_CLUSTER_2 0x0B700 +#define AUD_B_DOWN_CLUSTER_3 0x0B780 + +#define AUD_C_DOWN_CLUSTER_1 0x0B800 +#define AUD_C_DOWN_CLUSTER_2 0x0B880 +#define AUD_C_DOWN_CLUSTER_3 0x0B900 + +#define AUD_D_DOWN_CLUSTER_1 0x0B980 +#define AUD_D_DOWN_CLUSTER_2 0x0BA00 +#define AUD_D_DOWN_CLUSTER_3 0x0BA80 + +#define TX_SRAM_POOL_FREE 0x0BB00 +#define TX_SRAM_END 0x0C000 + +#define BYTES_TO_DWORDS(bcount) ((bcount) >> 2) +#define BYTES_TO_QWORDS(bcount) ((bcount) >> 3) +#define BYTES_TO_OWORDS(bcount) ((bcount) >> 4) + +#define VID_IQ_SIZE_DW BYTES_TO_DWORDS(VID_IQ_SIZE) +#define VID_CDT_SIZE_QW BYTES_TO_QWORDS(VID_CDT_SIZE) +#define VID_CLUSTER_SIZE_OW BYTES_TO_OWORDS(VID_CLUSTER_SIZE) + +#define AUDIO_IQ_SIZE_DW BYTES_TO_DWORDS(AUDIO_IQ_SIZE) +#define AUDIO_CDT_SIZE_QW BYTES_TO_QWORDS(AUDIO_CDT_SIZE) +#define AUDIO_CLUSTER_SIZE_QW BYTES_TO_QWORDS(AUDIO_CLUSTER_SIZE) + +#define MBIF_IQ_SIZE_DW BYTES_TO_DWORDS(MBIF_IQ_SIZE) +#define MBIF_CDT_SIZE_QW BYTES_TO_QWORDS(MBIF_CDT_SIZE) +#define MBIF_CLUSTER_SIZE_OW BYTES_TO_OWORDS(MBIF_CLUSTER_SIZE) + +#endif diff --git a/drivers/media/pci/cx25821/cx25821-video-upstream.c b/drivers/media/pci/cx25821/cx25821-video-upstream.c new file mode 100644 index 00000000..88ffef41 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-video-upstream.c @@ -0,0 +1,676 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "cx25821-video.h" +#include "cx25821-video-upstream.h" + +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards"); +MODULE_AUTHOR("Hiep Huynh "); +MODULE_LICENSE("GPL"); + +static int _intr_msk = FLD_VID_SRC_RISC1 | FLD_VID_SRC_UF | FLD_VID_SRC_SYNC | + FLD_VID_SRC_OPC_ERR; + +int cx25821_sram_channel_setup_upstream(struct cx25821_dev *dev, + const struct sram_channel *ch, + unsigned int bpl, u32 risc) +{ + unsigned int i, lines; + u32 cdt; + + if (ch->cmds_start == 0) { + cx_write(ch->ptr1_reg, 0); + cx_write(ch->ptr2_reg, 0); + cx_write(ch->cnt2_reg, 0); + cx_write(ch->cnt1_reg, 0); + return 0; + } + + bpl = (bpl + 7) & ~7; /* alignment */ + cdt = ch->cdt; + lines = ch->fifo_size / bpl; + + if (lines > 4) + lines = 4; + + BUG_ON(lines < 2); + + /* write CDT */ + for (i = 0; i < lines; i++) { + cx_write(cdt + 16 * i, ch->fifo_start + bpl * i); + cx_write(cdt + 16 * i + 4, 0); + cx_write(cdt + 16 * i + 8, 0); + cx_write(cdt + 16 * i + 12, 0); + } + + /* write CMDS */ + cx_write(ch->cmds_start + 0, risc); + + cx_write(ch->cmds_start + 4, 0); + cx_write(ch->cmds_start + 8, cdt); + cx_write(ch->cmds_start + 12, (lines * 16) >> 3); + cx_write(ch->cmds_start + 16, ch->ctrl_start); + + cx_write(ch->cmds_start + 20, VID_IQ_SIZE_DW); + + for (i = 24; i < 80; i += 4) + cx_write(ch->cmds_start + i, 0); + + /* fill registers */ + cx_write(ch->ptr1_reg, ch->fifo_start); + cx_write(ch->ptr2_reg, cdt); + cx_write(ch->cnt2_reg, (lines * 16) >> 3); + cx_write(ch->cnt1_reg, (bpl >> 3) - 1); + + return 0; +} + +static __le32 *cx25821_update_riscprogram(struct cx25821_channel *chan, + __le32 *rp, unsigned int offset, + unsigned int bpl, u32 sync_line, + unsigned int lines, int fifo_enable, + int field_type) +{ + struct cx25821_video_out_data *out = chan->out; + unsigned int line, i; + int dist_betwn_starts = bpl * 2; + + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + if (USE_RISC_NOOP_VIDEO) { + for (i = 0; i < NUM_NO_OPS; i++) + *(rp++) = cpu_to_le32(RISC_NOOP); + } + + /* scan lines */ + for (line = 0; line < lines; line++) { + *(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl); + *(rp++) = cpu_to_le32(out->_data_buf_phys_addr + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + + if ((lines <= NTSC_FIELD_HEIGHT) + || (line < (NTSC_FIELD_HEIGHT - 1)) || !(out->is_60hz)) { + offset += dist_betwn_starts; + } + } + + return rp; +} + +static __le32 *cx25821_risc_field_upstream(struct cx25821_channel *chan, __le32 *rp, + dma_addr_t databuf_phys_addr, + unsigned int offset, u32 sync_line, + unsigned int bpl, unsigned int lines, + int fifo_enable, int field_type) +{ + struct cx25821_video_out_data *out = chan->out; + unsigned int line, i; + const struct sram_channel *sram_ch = chan->sram_channels; + int dist_betwn_starts = bpl * 2; + + /* sync instruction */ + if (sync_line != NO_SYNC_LINE) + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + if (USE_RISC_NOOP_VIDEO) { + for (i = 0; i < NUM_NO_OPS; i++) + *(rp++) = cpu_to_le32(RISC_NOOP); + } + + /* scan lines */ + for (line = 0; line < lines; line++) { + *(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl); + *(rp++) = cpu_to_le32(databuf_phys_addr + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + + if ((lines <= NTSC_FIELD_HEIGHT) + || (line < (NTSC_FIELD_HEIGHT - 1)) || !(out->is_60hz)) + /* to skip the other field line */ + offset += dist_betwn_starts; + + /* check if we need to enable the FIFO after the first 4 lines + * For the upstream video channel, the risc engine will enable + * the FIFO. */ + if (fifo_enable && line == 3) { + *(rp++) = RISC_WRITECR; + *(rp++) = sram_ch->dma_ctl; + *(rp++) = FLD_VID_FIFO_EN; + *(rp++) = 0x00000001; + } + } + + return rp; +} + +static int cx25821_risc_buffer_upstream(struct cx25821_channel *chan, + struct pci_dev *pci, + unsigned int top_offset, + unsigned int bpl, unsigned int lines) +{ + struct cx25821_video_out_data *out = chan->out; + __le32 *rp; + int fifo_enable = 0; + /* get line count for single field */ + int singlefield_lines = lines >> 1; + int odd_num_lines = singlefield_lines; + int frame = 0; + int frame_size = 0; + int databuf_offset = 0; + int risc_program_size = 0; + int risc_flag = RISC_CNT_RESET; + unsigned int bottom_offset = bpl; + dma_addr_t risc_phys_jump_addr; + + if (out->is_60hz) { + odd_num_lines = singlefield_lines + 1; + risc_program_size = FRAME1_VID_PROG_SIZE; + frame_size = (bpl == Y411_LINE_SZ) ? + FRAME_SIZE_NTSC_Y411 : FRAME_SIZE_NTSC_Y422; + } else { + risc_program_size = PAL_VID_PROG_SIZE; + frame_size = (bpl == Y411_LINE_SZ) ? + FRAME_SIZE_PAL_Y411 : FRAME_SIZE_PAL_Y422; + } + + /* Virtual address of Risc buffer program */ + rp = out->_dma_virt_addr; + + for (frame = 0; frame < NUM_FRAMES; frame++) { + databuf_offset = frame_size * frame; + + if (UNSET != top_offset) { + fifo_enable = (frame == 0) ? FIFO_ENABLE : FIFO_DISABLE; + rp = cx25821_risc_field_upstream(chan, rp, + out->_data_buf_phys_addr + + databuf_offset, top_offset, 0, bpl, + odd_num_lines, fifo_enable, ODD_FIELD); + } + + fifo_enable = FIFO_DISABLE; + + /* Even Field */ + rp = cx25821_risc_field_upstream(chan, rp, + out->_data_buf_phys_addr + + databuf_offset, bottom_offset, + 0x200, bpl, singlefield_lines, + fifo_enable, EVEN_FIELD); + + if (frame == 0) { + risc_flag = RISC_CNT_RESET; + risc_phys_jump_addr = out->_dma_phys_start_addr + + risc_program_size; + } else { + risc_phys_jump_addr = out->_dma_phys_start_addr; + risc_flag = RISC_CNT_INC; + } + + /* Loop to 2ndFrameRISC or to Start of Risc + * program & generate IRQ + */ + *(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | risc_flag); + *(rp++) = cpu_to_le32(risc_phys_jump_addr); + *(rp++) = cpu_to_le32(0); + } + + return 0; +} + +void cx25821_stop_upstream_video(struct cx25821_channel *chan) +{ + struct cx25821_video_out_data *out = chan->out; + struct cx25821_dev *dev = chan->dev; + const struct sram_channel *sram_ch = chan->sram_channels; + u32 tmp = 0; + + if (!out->_is_running) { + pr_info("No video file is currently running so return!\n"); + return; + } + + /* Set the interrupt mask register, disable irq. */ + cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) & ~(1 << sram_ch->irq_bit)); + + /* Disable RISC interrupts */ + tmp = cx_read(sram_ch->int_msk); + cx_write(sram_ch->int_msk, tmp & ~_intr_msk); + + /* Turn OFF risc and fifo enable */ + tmp = cx_read(sram_ch->dma_ctl); + cx_write(sram_ch->dma_ctl, tmp & ~(FLD_VID_FIFO_EN | FLD_VID_RISC_EN)); + + free_irq(dev->pci->irq, chan); + + /* Clear data buffer memory */ + if (out->_data_buf_virt_addr) + memset(out->_data_buf_virt_addr, 0, out->_data_buf_size); + + out->_is_running = 0; + out->_is_first_frame = 0; + out->_frame_count = 0; + out->_file_status = END_OF_FILE; + + tmp = cx_read(VID_CH_MODE_SEL); + cx_write(VID_CH_MODE_SEL, tmp & 0xFFFFFE00); +} + +void cx25821_free_mem_upstream(struct cx25821_channel *chan) +{ + struct cx25821_video_out_data *out = chan->out; + struct cx25821_dev *dev = chan->dev; + + if (out->_is_running) + cx25821_stop_upstream_video(chan); + + if (out->_dma_virt_addr) { + pci_free_consistent(dev->pci, out->_risc_size, + out->_dma_virt_addr, out->_dma_phys_addr); + out->_dma_virt_addr = NULL; + } + + if (out->_data_buf_virt_addr) { + pci_free_consistent(dev->pci, out->_data_buf_size, + out->_data_buf_virt_addr, + out->_data_buf_phys_addr); + out->_data_buf_virt_addr = NULL; + } +} + +int cx25821_write_frame(struct cx25821_channel *chan, + const char __user *data, size_t count) +{ + struct cx25821_video_out_data *out = chan->out; + int line_size = (out->_pixel_format == PIXEL_FRMT_411) ? + Y411_LINE_SZ : Y422_LINE_SZ; + int frame_size = 0; + int frame_offset = 0; + int curpos = out->curpos; + + if (out->is_60hz) + frame_size = (line_size == Y411_LINE_SZ) ? + FRAME_SIZE_NTSC_Y411 : FRAME_SIZE_NTSC_Y422; + else + frame_size = (line_size == Y411_LINE_SZ) ? + FRAME_SIZE_PAL_Y411 : FRAME_SIZE_PAL_Y422; + + if (curpos == 0) { + out->cur_frame_index = out->_frame_index; + if (wait_event_interruptible(out->waitq, out->cur_frame_index != out->_frame_index)) + return -EINTR; + out->cur_frame_index = out->_frame_index; + } + + frame_offset = out->cur_frame_index ? frame_size : 0; + + if (frame_size - curpos < count) + count = frame_size - curpos; + memcpy((char *)out->_data_buf_virt_addr + frame_offset + curpos, + data, count); + curpos += count; + if (curpos == frame_size) { + out->_frame_count++; + curpos = 0; + } + out->curpos = curpos; + + return count; +} + +static int cx25821_upstream_buffer_prepare(struct cx25821_channel *chan, + const struct sram_channel *sram_ch, + int bpl) +{ + struct cx25821_video_out_data *out = chan->out; + struct cx25821_dev *dev = chan->dev; + int ret = 0; + dma_addr_t dma_addr; + dma_addr_t data_dma_addr; + + if (out->_dma_virt_addr != NULL) + pci_free_consistent(dev->pci, out->upstream_riscbuf_size, + out->_dma_virt_addr, out->_dma_phys_addr); + + out->_dma_virt_addr = pci_alloc_consistent(dev->pci, + out->upstream_riscbuf_size, &dma_addr); + out->_dma_virt_start_addr = out->_dma_virt_addr; + out->_dma_phys_start_addr = dma_addr; + out->_dma_phys_addr = dma_addr; + out->_risc_size = out->upstream_riscbuf_size; + + if (!out->_dma_virt_addr) { + pr_err("FAILED to allocate memory for Risc buffer! Returning\n"); + return -ENOMEM; + } + + /* Clear memory at address */ + memset(out->_dma_virt_addr, 0, out->_risc_size); + + if (out->_data_buf_virt_addr != NULL) + pci_free_consistent(dev->pci, out->upstream_databuf_size, + out->_data_buf_virt_addr, + out->_data_buf_phys_addr); + /* For Video Data buffer allocation */ + out->_data_buf_virt_addr = pci_alloc_consistent(dev->pci, + out->upstream_databuf_size, &data_dma_addr); + out->_data_buf_phys_addr = data_dma_addr; + out->_data_buf_size = out->upstream_databuf_size; + + if (!out->_data_buf_virt_addr) { + pr_err("FAILED to allocate memory for data buffer! Returning\n"); + return -ENOMEM; + } + + /* Clear memory at address */ + memset(out->_data_buf_virt_addr, 0, out->_data_buf_size); + + /* Create RISC programs */ + ret = cx25821_risc_buffer_upstream(chan, dev->pci, 0, bpl, + out->_lines_count); + if (ret < 0) { + pr_info("Failed creating Video Upstream Risc programs!\n"); + goto error; + } + + return 0; + +error: + return ret; +} + +static int cx25821_video_upstream_irq(struct cx25821_channel *chan, u32 status) +{ + struct cx25821_video_out_data *out = chan->out; + struct cx25821_dev *dev = chan->dev; + u32 int_msk_tmp; + const struct sram_channel *channel = chan->sram_channels; + int singlefield_lines = NTSC_FIELD_HEIGHT; + int line_size_in_bytes = Y422_LINE_SZ; + int odd_risc_prog_size = 0; + dma_addr_t risc_phys_jump_addr; + __le32 *rp; + + if (status & FLD_VID_SRC_RISC1) { + /* We should only process one program per call */ + u32 prog_cnt = cx_read(channel->gpcnt); + + /* Since we've identified our IRQ, clear our bits from the + * interrupt mask and interrupt status registers */ + int_msk_tmp = cx_read(channel->int_msk); + cx_write(channel->int_msk, int_msk_tmp & ~_intr_msk); + cx_write(channel->int_stat, _intr_msk); + + wake_up(&out->waitq); + + spin_lock(&dev->slock); + + out->_frame_index = prog_cnt; + + if (out->_is_first_frame) { + out->_is_first_frame = 0; + + if (out->is_60hz) { + singlefield_lines += 1; + odd_risc_prog_size = ODD_FLD_NTSC_PROG_SIZE; + } else { + singlefield_lines = PAL_FIELD_HEIGHT; + odd_risc_prog_size = ODD_FLD_PAL_PROG_SIZE; + } + + if (out->_dma_virt_start_addr != NULL) { + line_size_in_bytes = + (out->_pixel_format == + PIXEL_FRMT_411) ? Y411_LINE_SZ : + Y422_LINE_SZ; + risc_phys_jump_addr = + out->_dma_phys_start_addr + + odd_risc_prog_size; + + rp = cx25821_update_riscprogram(chan, + out->_dma_virt_start_addr, TOP_OFFSET, + line_size_in_bytes, 0x0, + singlefield_lines, FIFO_DISABLE, + ODD_FIELD); + + /* Jump to Even Risc program of 1st Frame */ + *(rp++) = cpu_to_le32(RISC_JUMP); + *(rp++) = cpu_to_le32(risc_phys_jump_addr); + *(rp++) = cpu_to_le32(0); + } + } + + spin_unlock(&dev->slock); + } else { + if (status & FLD_VID_SRC_UF) + pr_err("%s(): Video Received Underflow Error Interrupt!\n", + __func__); + + if (status & FLD_VID_SRC_SYNC) + pr_err("%s(): Video Received Sync Error Interrupt!\n", + __func__); + + if (status & FLD_VID_SRC_OPC_ERR) + pr_err("%s(): Video Received OpCode Error Interrupt!\n", + __func__); + } + + if (out->_file_status == END_OF_FILE) { + pr_err("EOF Channel 1 Framecount = %d\n", out->_frame_count); + return -1; + } + /* ElSE, set the interrupt mask register, re-enable irq. */ + int_msk_tmp = cx_read(channel->int_msk); + cx_write(channel->int_msk, int_msk_tmp |= _intr_msk); + + return 0; +} + +static irqreturn_t cx25821_upstream_irq(int irq, void *dev_id) +{ + struct cx25821_channel *chan = dev_id; + struct cx25821_dev *dev = chan->dev; + u32 vid_status; + int handled = 0; + const struct sram_channel *sram_ch; + + if (!dev) + return -1; + + sram_ch = chan->sram_channels; + + vid_status = cx_read(sram_ch->int_stat); + + /* Only deal with our interrupt */ + if (vid_status) + handled = cx25821_video_upstream_irq(chan, vid_status); + + return IRQ_RETVAL(handled); +} + +static void cx25821_set_pixelengine(struct cx25821_channel *chan, + const struct sram_channel *ch, + int pix_format) +{ + struct cx25821_video_out_data *out = chan->out; + struct cx25821_dev *dev = chan->dev; + int width = WIDTH_D1; + int height = out->_lines_count; + int num_lines, odd_num_lines; + u32 value; + int vip_mode = OUTPUT_FRMT_656; + + value = ((pix_format & 0x3) << 12) | (vip_mode & 0x7); + value &= 0xFFFFFFEF; + value |= out->is_60hz ? 0 : 0x10; + cx_write(ch->vid_fmt_ctl, value); + + /* set number of active pixels in each line. + * Default is 720 pixels in both NTSC and PAL format */ + cx_write(ch->vid_active_ctl1, width); + + num_lines = (height / 2) & 0x3FF; + odd_num_lines = num_lines; + + if (out->is_60hz) + odd_num_lines += 1; + + value = (num_lines << 16) | odd_num_lines; + + /* set number of active lines in field 0 (top) and field 1 (bottom) */ + cx_write(ch->vid_active_ctl2, value); + + cx_write(ch->vid_cdt_size, VID_CDT_SIZE >> 3); +} + +static int cx25821_start_video_dma_upstream(struct cx25821_channel *chan, + const struct sram_channel *sram_ch) +{ + struct cx25821_video_out_data *out = chan->out; + struct cx25821_dev *dev = chan->dev; + u32 tmp = 0; + int err = 0; + + /* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for + * channel A-C + */ + tmp = cx_read(VID_CH_MODE_SEL); + cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF); + + /* Set the physical start address of the RISC program in the initial + * program counter(IPC) member of the cmds. + */ + cx_write(sram_ch->cmds_start + 0, out->_dma_phys_addr); + /* Risc IPC High 64 bits 63-32 */ + cx_write(sram_ch->cmds_start + 4, 0); + + /* reset counter */ + cx_write(sram_ch->gpcnt_ctl, 3); + + /* Clear our bits from the interrupt status register. */ + cx_write(sram_ch->int_stat, _intr_msk); + + /* Set the interrupt mask register, enable irq. */ + cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit)); + tmp = cx_read(sram_ch->int_msk); + cx_write(sram_ch->int_msk, tmp |= _intr_msk); + + err = request_irq(dev->pci->irq, cx25821_upstream_irq, + IRQF_SHARED, dev->name, chan); + if (err < 0) { + pr_err("%s: can't get upstream IRQ %d\n", + dev->name, dev->pci->irq); + goto fail_irq; + } + + /* Start the DMA engine */ + tmp = cx_read(sram_ch->dma_ctl); + cx_set(sram_ch->dma_ctl, tmp | FLD_VID_RISC_EN); + + out->_is_running = 1; + out->_is_first_frame = 1; + + return 0; + +fail_irq: + cx25821_dev_unregister(dev); + return err; +} + +int cx25821_vidupstream_init(struct cx25821_channel *chan, + int pixel_format) +{ + struct cx25821_video_out_data *out = chan->out; + struct cx25821_dev *dev = chan->dev; + const struct sram_channel *sram_ch; + u32 tmp; + int err = 0; + int data_frame_size = 0; + int risc_buffer_size = 0; + + if (out->_is_running) { + pr_info("Video Channel is still running so return!\n"); + return 0; + } + + sram_ch = chan->sram_channels; + + out->is_60hz = dev->tvnorm & V4L2_STD_525_60; + + /* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for + * channel A-C + */ + tmp = cx_read(VID_CH_MODE_SEL); + cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF); + + out->_is_running = 0; + out->_frame_count = 0; + out->_file_status = RESET_STATUS; + out->_lines_count = out->is_60hz ? 480 : 576; + out->_pixel_format = pixel_format; + out->_line_size = (out->_pixel_format == PIXEL_FRMT_422) ? + (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2; + data_frame_size = out->is_60hz ? NTSC_DATA_BUF_SZ : PAL_DATA_BUF_SZ; + risc_buffer_size = out->is_60hz ? + NTSC_RISC_BUF_SIZE : PAL_RISC_BUF_SIZE; + + out->_is_running = 0; + out->_frame_count = 0; + out->_file_status = RESET_STATUS; + out->_lines_count = out->is_60hz ? 480 : 576; + out->_pixel_format = pixel_format; + out->_line_size = (out->_pixel_format == PIXEL_FRMT_422) ? + (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2; + out->curpos = 0; + init_waitqueue_head(&out->waitq); + + err = cx25821_sram_channel_setup_upstream(dev, sram_ch, + out->_line_size, 0); + + /* setup fifo + format */ + cx25821_set_pixelengine(chan, sram_ch, out->_pixel_format); + + out->upstream_riscbuf_size = risc_buffer_size * 2; + out->upstream_databuf_size = data_frame_size * 2; + + /* Allocating buffers and prepare RISC program */ + err = cx25821_upstream_buffer_prepare(chan, sram_ch, out->_line_size); + if (err < 0) { + pr_err("%s: Failed to set up Video upstream buffers!\n", + dev->name); + goto error; + } + + cx25821_start_video_dma_upstream(chan, sram_ch); + + return 0; + +error: + cx25821_dev_unregister(dev); + + return err; +} diff --git a/drivers/media/pci/cx25821/cx25821-video-upstream.h b/drivers/media/pci/cx25821/cx25821-video-upstream.h new file mode 100644 index 00000000..268ec8aa --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-video-upstream.h @@ -0,0 +1,139 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#define OUTPUT_FRMT_656 0 +#define OPEN_FILE_1 0 +#define NUM_PROGS 8 +#define NUM_FRAMES 2 +#define ODD_FIELD 0 +#define EVEN_FIELD 1 +#define TOP_OFFSET 0 +#define FIFO_DISABLE 0 +#define FIFO_ENABLE 1 +#define TEST_FRAMES 5 +#define END_OF_FILE 0 +#define IN_PROGRESS 1 +#define RESET_STATUS -1 +#define NUM_NO_OPS 5 + +/* PAL and NTSC line sizes and number of lines. */ +#define WIDTH_D1 720 +#define NTSC_LINES_PER_FRAME 480 +#define PAL_LINES_PER_FRAME 576 +#define PAL_LINE_SZ 1440 +#define Y422_LINE_SZ 1440 +#define Y411_LINE_SZ 1080 +#define NTSC_FIELD_HEIGHT 240 +#define NTSC_ODD_FLD_LINES 241 +#define PAL_FIELD_HEIGHT 288 + +#define FRAME_SIZE_NTSC_Y422 (NTSC_LINES_PER_FRAME * Y422_LINE_SZ) +#define FRAME_SIZE_NTSC_Y411 (NTSC_LINES_PER_FRAME * Y411_LINE_SZ) +#define FRAME_SIZE_PAL_Y422 (PAL_LINES_PER_FRAME * Y422_LINE_SZ) +#define FRAME_SIZE_PAL_Y411 (PAL_LINES_PER_FRAME * Y411_LINE_SZ) + +#define NTSC_DATA_BUF_SZ (Y422_LINE_SZ * NTSC_LINES_PER_FRAME) +#define PAL_DATA_BUF_SZ (Y422_LINE_SZ * PAL_LINES_PER_FRAME) + +#define RISC_WRITECR_INSTRUCTION_SIZE 16 +#define RISC_SYNC_INSTRUCTION_SIZE 4 +#define JUMP_INSTRUCTION_SIZE 12 +#define MAXSIZE_NO_OPS 36 +#define DWORD_SIZE 4 + +#define USE_RISC_NOOP_VIDEO 1 + +#ifdef USE_RISC_NOOP_VIDEO +#define PAL_US_VID_PROG_SIZE \ + (PAL_FIELD_HEIGHT * 3 * DWORD_SIZE + \ + RISC_WRITECR_INSTRUCTION_SIZE + RISC_SYNC_INSTRUCTION_SIZE + \ + NUM_NO_OPS * DWORD_SIZE) + +#define PAL_RISC_BUF_SIZE (2 * PAL_US_VID_PROG_SIZE) + +#define PAL_VID_PROG_SIZE \ + ((PAL_FIELD_HEIGHT * 2) * 3 * DWORD_SIZE + \ + 2 * RISC_SYNC_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE + \ + JUMP_INSTRUCTION_SIZE + 2 * NUM_NO_OPS * DWORD_SIZE) + +#define ODD_FLD_PAL_PROG_SIZE \ + (PAL_FIELD_HEIGHT * 3 * DWORD_SIZE + \ + RISC_SYNC_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE + \ + NUM_NO_OPS * DWORD_SIZE) + +#define ODD_FLD_NTSC_PROG_SIZE \ + (NTSC_ODD_FLD_LINES * 3 * DWORD_SIZE + \ + RISC_SYNC_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE + \ + NUM_NO_OPS * DWORD_SIZE) + +#define NTSC_US_VID_PROG_SIZE \ + ((NTSC_ODD_FLD_LINES + 1) * 3 * DWORD_SIZE + \ + RISC_WRITECR_INSTRUCTION_SIZE + JUMP_INSTRUCTION_SIZE + \ + NUM_NO_OPS * DWORD_SIZE) + +#define NTSC_RISC_BUF_SIZE \ + (2 * (RISC_SYNC_INSTRUCTION_SIZE + NTSC_US_VID_PROG_SIZE)) + +#define FRAME1_VID_PROG_SIZE \ + ((NTSC_ODD_FLD_LINES + NTSC_FIELD_HEIGHT) * 3 * DWORD_SIZE + \ + 2 * RISC_SYNC_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE + \ + JUMP_INSTRUCTION_SIZE + 2 * NUM_NO_OPS * DWORD_SIZE) + +#endif + +#ifndef USE_RISC_NOOP_VIDEO +#define PAL_US_VID_PROG_SIZE \ + (PAL_FIELD_HEIGHT * 3 * DWORD_SIZE + \ + RISC_WRITECR_INSTRUCTION_SIZE + RISC_SYNC_INSTRUCTION_SIZE + \ + JUMP_INSTRUCTION_SIZE) + +#define PAL_RISC_BUF_SIZE (2 * PAL_US_VID_PROG_SIZE) + +#define PAL_VID_PROG_SIZE \ + ((PAL_FIELD_HEIGHT * 2) * 3 * DWORD_SIZE + \ + 2 * RISC_SYNC_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE + \ + JUMP_INSTRUCTION_SIZE) + +#define ODD_FLD_PAL_PROG_SIZE \ + (PAL_FIELD_HEIGHT * 3 * DWORD_SIZE + \ + RISC_SYNC_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE) + +#define ODD_FLD_NTSC_PROG_SIZE \ + (NTSC_ODD_FLD_LINES * 3 * DWORD_SIZE + \ + RISC_SYNC_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE) + +#define NTSC_US_VID_PROG_SIZE \ + ((NTSC_ODD_FLD_LINES + 1) * 3 * DWORD_SIZE + \ + RISC_WRITECR_INSTRUCTION_SIZE + JUMP_INSTRUCTION_SIZE) + +#define NTSC_RISC_BUF_SIZE \ + (2 * (RISC_SYNC_INSTRUCTION_SIZE + NTSC_US_VID_PROG_SIZE)) + +#define FRAME1_VID_PROG_SIZE \ + ((NTSC_ODD_FLD_LINES + NTSC_FIELD_HEIGHT) * 3 * DWORD_SIZE + \ + 2 * RISC_SYNC_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE + \ + JUMP_INSTRUCTION_SIZE) + +#endif diff --git a/drivers/media/pci/cx25821/cx25821-video.c b/drivers/media/pci/cx25821/cx25821-video.c new file mode 100644 index 00000000..d270819f --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-video.c @@ -0,0 +1,1132 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * Based on Steven Toth cx23885 driver + * Parts adapted/taken from Eduardo Moscoso Rubino + * Copyright (C) 2009 Eduardo Moscoso Rubino + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "cx25821-video.h" + +MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards"); +MODULE_AUTHOR("Hiep Huynh "); +MODULE_LICENSE("GPL"); + +static unsigned int video_nr[] = {[0 ... (CX25821_MAXBOARDS - 1)] = UNSET }; + +module_param_array(video_nr, int, NULL, 0444); + +MODULE_PARM_DESC(video_nr, "video device numbers"); + +static unsigned int video_debug = VIDEO_DEBUG; +module_param(video_debug, int, 0644); +MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); + +static unsigned int irq_debug; +module_param(irq_debug, int, 0644); +MODULE_PARM_DESC(irq_debug, "enable debug messages [IRQ handler]"); + +static unsigned int vid_limit = 16; +module_param(vid_limit, int, 0644); +MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); + +#define FORMAT_FLAGS_PACKED 0x01 + +static const struct cx25821_fmt formats[] = { + { + .name = "4:1:1, packed, Y41P", + .fourcc = V4L2_PIX_FMT_Y41P, + .depth = 12, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, +}; + +static const struct cx25821_fmt *cx25821_format_by_fourcc(unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) + if (formats[i].fourcc == fourcc) + return formats + i; + return NULL; +} + +void cx25821_video_wakeup(struct cx25821_dev *dev, struct cx25821_dmaqueue *q, + u32 count) +{ + struct cx25821_buffer *buf; + int bc; + + for (bc = 0;; bc++) { + if (list_empty(&q->active)) { + dprintk(1, "bc=%d (=0: active empty)\n", bc); + break; + } + + buf = list_entry(q->active.next, struct cx25821_buffer, + vb.queue); + + /* count comes from the hw and it is 16bit wide -- + * this trick handles wrap-arounds correctly for + * up to 32767 buffers in flight... */ + if ((s16) (count - buf->count) < 0) + break; + + v4l2_get_timestamp(&buf->vb.ts); + buf->vb.state = VIDEOBUF_DONE; + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); + } + + if (list_empty(&q->active)) + del_timer(&q->timeout); + else + mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); + if (bc != 1) + pr_err("%s: %d buffers handled (should be 1)\n", __func__, bc); +} + +int cx25821_start_video_dma(struct cx25821_dev *dev, + struct cx25821_dmaqueue *q, + struct cx25821_buffer *buf, + const struct sram_channel *channel) +{ + int tmp = 0; + + /* setup fifo + format */ + cx25821_sram_channel_setup(dev, channel, buf->bpl, buf->risc.dma); + + /* reset counter */ + cx_write(channel->gpcnt_ctl, 3); + q->count = 1; + + /* enable irq */ + cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << channel->i)); + cx_set(channel->int_msk, 0x11); + + /* start dma */ + cx_write(channel->dma_ctl, 0x11); /* FIFO and RISC enable */ + + /* make sure upstream setting if any is reversed */ + tmp = cx_read(VID_CH_MODE_SEL); + cx_write(VID_CH_MODE_SEL, tmp & 0xFFFFFE00); + + return 0; +} + +static int cx25821_restart_video_queue(struct cx25821_dev *dev, + struct cx25821_dmaqueue *q, + const struct sram_channel *channel) +{ + struct cx25821_buffer *buf, *prev; + struct list_head *item; + + if (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx25821_buffer, + vb.queue); + + cx25821_start_video_dma(dev, q, buf, channel); + + list_for_each(item, &q->active) { + buf = list_entry(item, struct cx25821_buffer, vb.queue); + buf->count = q->count++; + } + + mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); + return 0; + } + + prev = NULL; + for (;;) { + if (list_empty(&q->queued)) + return 0; + + buf = list_entry(q->queued.next, struct cx25821_buffer, + vb.queue); + + if (NULL == prev) { + list_move_tail(&buf->vb.queue, &q->active); + cx25821_start_video_dma(dev, q, buf, channel); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_move_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63 - 32 */ + } else { + return 0; + } + prev = buf; + } +} + +static void cx25821_vid_timeout(unsigned long data) +{ + struct cx25821_data *timeout_data = (struct cx25821_data *)data; + struct cx25821_dev *dev = timeout_data->dev; + const struct sram_channel *channel = timeout_data->channel; + struct cx25821_dmaqueue *q = &dev->channels[channel->i].dma_vidq; + struct cx25821_buffer *buf; + unsigned long flags; + + /* cx25821_sram_channel_dump(dev, channel); */ + cx_clear(channel->dma_ctl, 0x11); + + spin_lock_irqsave(&dev->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx25821_buffer, + vb.queue); + list_del(&buf->vb.queue); + + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + } + + cx25821_restart_video_queue(dev, q, channel); + spin_unlock_irqrestore(&dev->slock, flags); +} + +int cx25821_video_irq(struct cx25821_dev *dev, int chan_num, u32 status) +{ + u32 count = 0; + int handled = 0; + u32 mask; + const struct sram_channel *channel = dev->channels[chan_num].sram_channels; + + mask = cx_read(channel->int_msk); + if (0 == (status & mask)) + return handled; + + cx_write(channel->int_stat, status); + + /* risc op code error */ + if (status & (1 << 16)) { + pr_warn("%s, %s: video risc op code error\n", + dev->name, channel->name); + cx_clear(channel->dma_ctl, 0x11); + cx25821_sram_channel_dump(dev, channel); + } + + /* risc1 y */ + if (status & FLD_VID_DST_RISC1) { + spin_lock(&dev->slock); + count = cx_read(channel->gpcnt); + cx25821_video_wakeup(dev, &dev->channels[channel->i].dma_vidq, + count); + spin_unlock(&dev->slock); + handled++; + } + + /* risc2 y */ + if (status & 0x10) { + dprintk(2, "stopper video\n"); + spin_lock(&dev->slock); + cx25821_restart_video_queue(dev, + &dev->channels[channel->i].dma_vidq, channel); + spin_unlock(&dev->slock); + handled++; + } + return handled; +} + +static int cx25821_buffer_setup(struct videobuf_queue *q, unsigned int *count, + unsigned int *size) +{ + struct cx25821_channel *chan = q->priv_data; + + *size = chan->fmt->depth * chan->width * chan->height >> 3; + + if (0 == *count) + *count = 32; + + if (*size * *count > vid_limit * 1024 * 1024) + *count = (vid_limit * 1024 * 1024) / *size; + + return 0; +} + +static int cx25821_buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx25821_channel *chan = q->priv_data; + struct cx25821_dev *dev = chan->dev; + struct cx25821_buffer *buf = + container_of(vb, struct cx25821_buffer, vb); + int rc, init_buffer = 0; + u32 line0_offset; + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + int bpl_local = LINE_SIZE_D1; + + BUG_ON(NULL == chan->fmt); + if (chan->width < 48 || chan->width > 720 || + chan->height < 32 || chan->height > 576) + return -EINVAL; + + buf->vb.size = (chan->width * chan->height * chan->fmt->depth) >> 3; + + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != chan->fmt || + buf->vb.width != chan->width || + buf->vb.height != chan->height || buf->vb.field != field) { + buf->fmt = chan->fmt; + buf->vb.width = chan->width; + buf->vb.height = chan->height; + buf->vb.field = field; + init_buffer = 1; + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + init_buffer = 1; + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) { + printk(KERN_DEBUG pr_fmt("videobuf_iolock failed!\n")); + goto fail; + } + } + + dprintk(1, "init_buffer=%d\n", init_buffer); + + if (init_buffer) { + if (chan->pixel_formats == PIXEL_FRMT_411) + buf->bpl = (buf->fmt->depth * buf->vb.width) >> 3; + else + buf->bpl = (buf->fmt->depth >> 3) * (buf->vb.width); + + if (chan->pixel_formats == PIXEL_FRMT_411) { + bpl_local = buf->bpl; + } else { + bpl_local = buf->bpl; /* Default */ + + if (chan->use_cif_resolution) { + if (dev->tvnorm & V4L2_STD_625_50) + bpl_local = 352 << 1; + else + bpl_local = chan->cif_width << 1; + } + } + + switch (buf->vb.field) { + case V4L2_FIELD_TOP: + cx25821_risc_buffer(dev->pci, &buf->risc, + dma->sglist, 0, UNSET, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_BOTTOM: + cx25821_risc_buffer(dev->pci, &buf->risc, + dma->sglist, UNSET, 0, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_INTERLACED: + /* All other formats are top field first */ + line0_offset = 0; + dprintk(1, "top field first\n"); + + cx25821_risc_buffer(dev->pci, &buf->risc, + dma->sglist, line0_offset, + bpl_local, bpl_local, bpl_local, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_TB: + cx25821_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->bpl * (buf->vb.height >> 1), + buf->bpl, 0, buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_BT: + cx25821_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + buf->bpl * (buf->vb.height >> 1), 0, + buf->bpl, 0, buf->vb.height >> 1); + break; + default: + BUG(); + } + } + + dprintk(2, "[%p/%d] buffer_prep - %dx%d %dbpp \"%s\" - dma=0x%08lx\n", + buf, buf->vb.i, chan->width, chan->height, chan->fmt->depth, + chan->fmt->name, (unsigned long)buf->risc.dma); + + buf->vb.state = VIDEOBUF_PREPARED; + + return 0; + +fail: + cx25821_free_buffer(q, buf); + return rc; +} + +static void cx25821_buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct cx25821_buffer *buf = + container_of(vb, struct cx25821_buffer, vb); + + cx25821_free_buffer(q, buf); +} + +static int cx25821_video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct cx25821_channel *chan = video_drvdata(file); + + return videobuf_mmap_mapper(&chan->vidq, vma); +} + + +static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx25821_buffer *buf = + container_of(vb, struct cx25821_buffer, vb); + struct cx25821_buffer *prev; + struct cx25821_channel *chan = vq->priv_data; + struct cx25821_dev *dev = chan->dev; + struct cx25821_dmaqueue *q = &dev->channels[chan->id].dma_vidq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]); + + if (!list_empty(&q->queued)) { + list_add_tail(&buf->vb.queue, &q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf, + buf->vb.i); + + } else if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue, &q->active); + cx25821_start_video_dma(dev, q, buf, chan->sram_channels); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n", + buf, buf->vb.i, buf->count, q->count); + } else { + prev = list_entry(q->active.prev, struct cx25821_buffer, + vb.queue); + if (prev->vb.width == buf->vb.width + && prev->vb.height == buf->vb.height + && prev->fmt == buf->fmt) { + list_add_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + + /* 64 bit bits 63-32 */ + prev->risc.jmp[2] = cpu_to_le32(0); + dprintk(2, "[%p/%d] buffer_queue - append to active, buf->count=%d\n", + buf, buf->vb.i, buf->count); + + } else { + list_add_tail(&buf->vb.queue, &q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf, + buf->vb.i); + } + } + + if (list_empty(&q->active)) + dprintk(2, "active queue empty!\n"); +} + +static struct videobuf_queue_ops cx25821_video_qops = { + .buf_setup = cx25821_buffer_setup, + .buf_prepare = cx25821_buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = cx25821_buffer_release, +}; + +static ssize_t video_read(struct file *file, char __user * data, size_t count, + loff_t *ppos) +{ + struct v4l2_fh *fh = file->private_data; + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + int err = 0; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + if (chan->streaming_fh && chan->streaming_fh != fh) { + err = -EBUSY; + goto unlock; + } + chan->streaming_fh = fh; + + err = videobuf_read_one(&chan->vidq, data, count, ppos, + file->f_flags & O_NONBLOCK); +unlock: + mutex_unlock(&dev->lock); + return err; +} + +static unsigned int video_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct cx25821_channel *chan = video_drvdata(file); + unsigned long req_events = poll_requested_events(wait); + unsigned int res = v4l2_ctrl_poll(file, wait); + + if (req_events & (POLLIN | POLLRDNORM)) + res |= videobuf_poll_stream(file, &chan->vidq, wait); + return res; + + /* This doesn't belong in poll(). This can be done + * much better with vb2. We keep this code here as a + * reminder. + if ((res & POLLIN) && buf->vb.state == VIDEOBUF_DONE) { + struct cx25821_dev *dev = chan->dev; + + if (dev && chan->use_cif_resolution) { + u8 cam_id = *((char *)buf->vb.baddr + 3); + memcpy((char *)buf->vb.baddr, + (char *)buf->vb.baddr + (chan->width * 2), + (chan->width * 2)); + *((char *)buf->vb.baddr + 3) = cam_id; + } + } + */ +} + +static int video_release(struct file *file) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct cx25821_dev *dev = chan->dev; + const struct sram_channel *sram_ch = + dev->channels[0].sram_channels; + + mutex_lock(&dev->lock); + /* stop the risc engine and fifo */ + cx_write(sram_ch->dma_ctl, 0); /* FIFO and RISC disable */ + + /* stop video capture */ + if (chan->streaming_fh == fh) { + videobuf_queue_cancel(&chan->vidq); + chan->streaming_fh = NULL; + } + + if (chan->vidq.read_buf) { + cx25821_buffer_release(&chan->vidq, chan->vidq.read_buf); + kfree(chan->vidq.read_buf); + } + + videobuf_mmap_free(&chan->vidq); + mutex_unlock(&dev->lock); + + return v4l2_fh_release(file); +} + +/* VIDEO IOCTLS */ + +static int cx25821_vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (unlikely(f->index >= ARRAY_SIZE(formats))) + return -EINVAL; + + strlcpy(f->description, formats[f->index].name, sizeof(f->description)); + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +static int cx25821_vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx25821_channel *chan = video_drvdata(file); + + f->fmt.pix.width = chan->width; + f->fmt.pix.height = chan->height; + f->fmt.pix.field = chan->vidq.field; + f->fmt.pix.pixelformat = chan->fmt->fourcc; + f->fmt.pix.bytesperline = (chan->width * chan->fmt->depth) >> 3; + f->fmt.pix.sizeimage = chan->height * f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + f->fmt.pix.priv = 0; + + return 0; +} + +static int cx25821_vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + const struct cx25821_fmt *fmt; + enum v4l2_field field = f->fmt.pix.field; + unsigned int maxh; + unsigned w; + + fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + maxh = (dev->tvnorm & V4L2_STD_625_50) ? 576 : 480; + + w = f->fmt.pix.width; + if (field != V4L2_FIELD_BOTTOM) + field = V4L2_FIELD_TOP; + if (w < 352) { + w = 176; + f->fmt.pix.height = maxh / 4; + } else if (w < 720) { + w = 352; + f->fmt.pix.height = maxh / 2; + } else { + w = 720; + f->fmt.pix.height = maxh; + field = V4L2_FIELD_INTERLACED; + } + f->fmt.pix.field = field; + f->fmt.pix.width = w; + f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + f->fmt.pix.priv = 0; + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + int pix_format = PIXEL_FRMT_422; + int err; + + err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f); + + if (0 != err) + return err; + + chan->fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat); + chan->vidq.field = f->fmt.pix.field; + chan->width = f->fmt.pix.width; + chan->height = f->fmt.pix.height; + + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P) + pix_format = PIXEL_FRMT_411; + else + pix_format = PIXEL_FRMT_422; + + cx25821_set_pixel_format(dev, SRAM_CH00, pix_format); + + /* check if cif resolution */ + if (chan->width == 320 || chan->width == 352) + chan->use_cif_resolution = 1; + else + chan->use_cif_resolution = 0; + + chan->cif_width = chan->width; + medusa_set_resolution(dev, chan->width, SRAM_CH00); + return 0; +} + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx25821_channel *chan = video_drvdata(file); + + if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (chan->streaming_fh && chan->streaming_fh != priv) + return -EBUSY; + chan->streaming_fh = priv; + + return videobuf_streamon(&chan->vidq); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx25821_channel *chan = video_drvdata(file); + + if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (chan->streaming_fh && chan->streaming_fh != priv) + return -EBUSY; + if (chan->streaming_fh == NULL) + return 0; + + chan->streaming_fh = NULL; + return videobuf_streamoff(&chan->vidq); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + int ret_val = 0; + struct cx25821_channel *chan = video_drvdata(file); + + ret_val = videobuf_dqbuf(&chan->vidq, p, file->f_flags & O_NONBLOCK); + p->sequence = chan->dma_vidq.count; + + return ret_val; +} + +static int vidioc_log_status(struct file *file, void *priv) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + const struct sram_channel *sram_ch = chan->sram_channels; + u32 tmp = 0; + + tmp = cx_read(sram_ch->dma_ctl); + pr_info("Video input 0 is %s\n", + (tmp & 0x11) ? "streaming" : "stopped"); + return 0; +} + + +static int cx25821_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + const u32 cap_input = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + const u32 cap_output = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_READWRITE; + + strcpy(cap->driver, "cx25821"); + strlcpy(cap->card, cx25821_boards[dev->board].name, sizeof(cap->card)); + sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci)); + if (chan->id >= VID_CHANNEL_NUM) + cap->device_caps = cap_output; + else + cap->device_caps = cap_input; + cap->capabilities = cap_input | cap_output | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int cx25821_vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct cx25821_channel *chan = video_drvdata(file); + + return videobuf_reqbufs(&chan->vidq, p); +} + +static int cx25821_vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx25821_channel *chan = video_drvdata(file); + + return videobuf_querybuf(&chan->vidq, p); +} + +static int cx25821_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct cx25821_channel *chan = video_drvdata(file); + + return videobuf_qbuf(&chan->vidq, p); +} + +static int cx25821_vidioc_g_std(struct file *file, void *priv, v4l2_std_id *tvnorms) +{ + struct cx25821_channel *chan = video_drvdata(file); + + *tvnorms = chan->dev->tvnorm; + return 0; +} + +static int cx25821_vidioc_s_std(struct file *file, void *priv, + v4l2_std_id tvnorms) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + + if (dev->tvnorm == tvnorms) + return 0; + + dev->tvnorm = tvnorms; + chan->width = 720; + chan->height = (dev->tvnorm & V4L2_STD_625_50) ? 576 : 480; + + medusa_set_videostandard(dev); + + return 0; +} + +static int cx25821_vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index) + return -EINVAL; + + i->type = V4L2_INPUT_TYPE_CAMERA; + i->std = CX25821_NORMS; + strcpy(i->name, "Composite"); + return 0; +} + +static int cx25821_vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int cx25821_vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + return i ? -EINVAL : 0; +} + +static int cx25821_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct cx25821_channel *chan = + container_of(ctrl->handler, struct cx25821_channel, hdl); + struct cx25821_dev *dev = chan->dev; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + medusa_set_brightness(dev, ctrl->val, chan->id); + break; + case V4L2_CID_HUE: + medusa_set_hue(dev, ctrl->val, chan->id); + break; + case V4L2_CID_CONTRAST: + medusa_set_contrast(dev, ctrl->val, chan->id); + break; + case V4L2_CID_SATURATION: + medusa_set_saturation(dev, ctrl->val, chan->id); + break; + default: + return -EINVAL; + } + return 0; +} + +static int cx25821_vidioc_enum_output(struct file *file, void *priv, + struct v4l2_output *o) +{ + if (o->index) + return -EINVAL; + + o->type = V4L2_INPUT_TYPE_CAMERA; + o->std = CX25821_NORMS; + strcpy(o->name, "Composite"); + return 0; +} + +static int cx25821_vidioc_g_output(struct file *file, void *priv, unsigned int *o) +{ + *o = 0; + return 0; +} + +static int cx25821_vidioc_s_output(struct file *file, void *priv, unsigned int o) +{ + return o ? -EINVAL : 0; +} + +static int cx25821_vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + const struct cx25821_fmt *fmt; + + fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + f->fmt.pix.width = 720; + f->fmt.pix.height = (dev->tvnorm & V4L2_STD_625_50) ? 576 : 480; + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + f->fmt.pix.priv = 0; + return 0; +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx25821_channel *chan = video_drvdata(file); + int err; + + err = cx25821_vidioc_try_fmt_vid_out(file, priv, f); + + if (0 != err) + return err; + + chan->fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat); + chan->vidq.field = f->fmt.pix.field; + chan->width = f->fmt.pix.width; + chan->height = f->fmt.pix.height; + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P) + chan->pixel_formats = PIXEL_FRMT_411; + else + chan->pixel_formats = PIXEL_FRMT_422; + return 0; +} + +static ssize_t video_write(struct file *file, const char __user *data, size_t count, + loff_t *ppos) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + struct v4l2_fh *fh = file->private_data; + int err = 0; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + if (chan->streaming_fh && chan->streaming_fh != fh) { + err = -EBUSY; + goto unlock; + } + if (!chan->streaming_fh) { + err = cx25821_vidupstream_init(chan, chan->pixel_formats); + if (err) + goto unlock; + chan->streaming_fh = fh; + } + + err = cx25821_write_frame(chan, data, count); + count -= err; + *ppos += err; + +unlock: + mutex_unlock(&dev->lock); + return err; +} + +static int video_out_release(struct file *file) +{ + struct cx25821_channel *chan = video_drvdata(file); + struct cx25821_dev *dev = chan->dev; + struct v4l2_fh *fh = file->private_data; + + mutex_lock(&dev->lock); + if (chan->streaming_fh == fh) { + cx25821_stop_upstream_video(chan); + chan->streaming_fh = NULL; + } + mutex_unlock(&dev->lock); + + return v4l2_fh_release(file); +} + +static const struct v4l2_ctrl_ops cx25821_ctrl_ops = { + .s_ctrl = cx25821_s_ctrl, +}; + +static const struct v4l2_file_operations video_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = video_release, + .read = video_read, + .poll = video_poll, + .mmap = cx25821_video_mmap, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops video_ioctl_ops = { + .vidioc_querycap = cx25821_vidioc_querycap, + .vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_reqbufs = cx25821_vidioc_reqbufs, + .vidioc_querybuf = cx25821_vidioc_querybuf, + .vidioc_qbuf = cx25821_vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_g_std = cx25821_vidioc_g_std, + .vidioc_s_std = cx25821_vidioc_s_std, + .vidioc_enum_input = cx25821_vidioc_enum_input, + .vidioc_g_input = cx25821_vidioc_g_input, + .vidioc_s_input = cx25821_vidioc_s_input, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_log_status = vidioc_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct video_device cx25821_video_device = { + .name = "cx25821-video", + .fops = &video_fops, + .release = video_device_release_empty, + .minor = -1, + .ioctl_ops = &video_ioctl_ops, + .tvnorms = CX25821_NORMS, +}; + +static const struct v4l2_file_operations video_out_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .write = video_write, + .release = video_out_release, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops video_out_ioctl_ops = { + .vidioc_querycap = cx25821_vidioc_querycap, + .vidioc_enum_fmt_vid_out = cx25821_vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_out = cx25821_vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_out = cx25821_vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + .vidioc_g_std = cx25821_vidioc_g_std, + .vidioc_s_std = cx25821_vidioc_s_std, + .vidioc_enum_output = cx25821_vidioc_enum_output, + .vidioc_g_output = cx25821_vidioc_g_output, + .vidioc_s_output = cx25821_vidioc_s_output, + .vidioc_log_status = vidioc_log_status, +}; + +static const struct video_device cx25821_video_out_device = { + .name = "cx25821-video", + .fops = &video_out_fops, + .release = video_device_release_empty, + .minor = -1, + .ioctl_ops = &video_out_ioctl_ops, + .tvnorms = CX25821_NORMS, +}; + +void cx25821_video_unregister(struct cx25821_dev *dev, int chan_num) +{ + cx_clear(PCI_INT_MSK, 1); + + if (video_is_registered(&dev->channels[chan_num].vdev)) { + video_unregister_device(&dev->channels[chan_num].vdev); + v4l2_ctrl_handler_free(&dev->channels[chan_num].hdl); + + btcx_riscmem_free(dev->pci, + &dev->channels[chan_num].dma_vidq.stopper); + } +} + +int cx25821_video_register(struct cx25821_dev *dev) +{ + int err; + int i; + + /* initial device configuration */ + dev->tvnorm = V4L2_STD_NTSC_M; + + spin_lock_init(&dev->slock); + + for (i = 0; i < MAX_VID_CHANNEL_NUM - 1; ++i) { + struct cx25821_channel *chan = &dev->channels[i]; + struct video_device *vdev = &chan->vdev; + struct v4l2_ctrl_handler *hdl = &chan->hdl; + bool is_output = i > SRAM_CH08; + + if (i == SRAM_CH08) /* audio channel */ + continue; + + if (!is_output) { + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &cx25821_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 10000, 1, 6200); + v4l2_ctrl_new_std(hdl, &cx25821_ctrl_ops, + V4L2_CID_CONTRAST, 0, 10000, 1, 5000); + v4l2_ctrl_new_std(hdl, &cx25821_ctrl_ops, + V4L2_CID_SATURATION, 0, 10000, 1, 5000); + v4l2_ctrl_new_std(hdl, &cx25821_ctrl_ops, + V4L2_CID_HUE, 0, 10000, 1, 5000); + if (hdl->error) { + err = hdl->error; + goto fail_unreg; + } + err = v4l2_ctrl_handler_setup(hdl); + if (err) + goto fail_unreg; + } else { + chan->out = &dev->vid_out_data[i - SRAM_CH09]; + chan->out->chan = chan; + } + + cx25821_risc_stopper(dev->pci, &chan->dma_vidq.stopper, + chan->sram_channels->dma_ctl, 0x11, 0); + + chan->sram_channels = &cx25821_sram_channels[i]; + chan->width = 720; + if (dev->tvnorm & V4L2_STD_625_50) + chan->height = 576; + else + chan->height = 480; + + if (chan->pixel_formats == PIXEL_FRMT_411) + chan->fmt = cx25821_format_by_fourcc(V4L2_PIX_FMT_Y41P); + else + chan->fmt = cx25821_format_by_fourcc(V4L2_PIX_FMT_YUYV); + + cx_write(chan->sram_channels->int_stat, 0xffffffff); + + INIT_LIST_HEAD(&chan->dma_vidq.active); + INIT_LIST_HEAD(&chan->dma_vidq.queued); + + chan->timeout_data.dev = dev; + chan->timeout_data.channel = &cx25821_sram_channels[i]; + chan->dma_vidq.timeout.function = cx25821_vid_timeout; + chan->dma_vidq.timeout.data = (unsigned long)&chan->timeout_data; + init_timer(&chan->dma_vidq.timeout); + + if (!is_output) + videobuf_queue_sg_init(&chan->vidq, &cx25821_video_qops, &dev->pci->dev, + &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, sizeof(struct cx25821_buffer), + chan, &dev->lock); + + /* register v4l devices */ + *vdev = is_output ? cx25821_video_out_device : cx25821_video_device; + vdev->v4l2_dev = &dev->v4l2_dev; + if (!is_output) + vdev->ctrl_handler = hdl; + else + vdev->vfl_dir = VFL_DIR_TX; + vdev->lock = &dev->lock; + set_bit(V4L2_FL_USE_FH_PRIO, &vdev->flags); + snprintf(vdev->name, sizeof(vdev->name), "%s #%d", dev->name, i); + video_set_drvdata(vdev, chan); + + err = video_register_device(vdev, VFL_TYPE_GRABBER, + video_nr[dev->nr]); + + if (err < 0) + goto fail_unreg; + } + + /* set PCI interrupt */ + cx_set(PCI_INT_MSK, 0xff); + + return 0; + +fail_unreg: + while (i >= 0) + cx25821_video_unregister(dev, i--); + return err; +} diff --git a/drivers/media/pci/cx25821/cx25821-video.h b/drivers/media/pci/cx25821/cx25821-video.h new file mode 100644 index 00000000..ab63b385 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-video.h @@ -0,0 +1,65 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * Based on Steven Toth cx23885 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CX25821_VIDEO_H_ +#define CX25821_VIDEO_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx25821.h" +#include +#include +#include + +#define VIDEO_DEBUG 0 + +#define dprintk(level, fmt, arg...) \ +do { \ + if (VIDEO_DEBUG >= level) \ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg); \ +} while (0) + +#define FORMAT_FLAGS_PACKED 0x01 +extern void cx25821_video_wakeup(struct cx25821_dev *dev, + struct cx25821_dmaqueue *q, u32 count); + +extern int cx25821_start_video_dma(struct cx25821_dev *dev, + struct cx25821_dmaqueue *q, + struct cx25821_buffer *buf, + const struct sram_channel *channel); + +extern int cx25821_video_irq(struct cx25821_dev *dev, int chan_num, u32 status); +extern void cx25821_video_unregister(struct cx25821_dev *dev, int chan_num); +extern int cx25821_video_register(struct cx25821_dev *dev); + +#endif diff --git a/drivers/media/pci/cx25821/cx25821.h b/drivers/media/pci/cx25821/cx25821.h new file mode 100644 index 00000000..90bdc196 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821.h @@ -0,0 +1,451 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors , + * Based on Steven Toth cx23885 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CX25821_H_ +#define CX25821_H_ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "btcx-risc.h" +#include "cx25821-reg.h" +#include "cx25821-medusa-reg.h" +#include "cx25821-sram.h" +#include "cx25821-audio.h" + +#include +#include + +#define CX25821_VERSION_CODE KERNEL_VERSION(0, 0, 106) + +#define UNSET (-1U) +#define NO_SYNC_LINE (-1U) + +#define CX25821_MAXBOARDS 2 + +#define LINE_SIZE_D1 1440 + +/* Number of decoders and encoders */ +#define MAX_DECODERS 8 +#define MAX_ENCODERS 2 +#define QUAD_DECODERS 4 +#define MAX_CAMERAS 16 + +/* Max number of inputs by card */ +#define MAX_CX25821_INPUT 8 +#define RESOURCE_VIDEO0 1 +#define RESOURCE_VIDEO1 2 +#define RESOURCE_VIDEO2 4 +#define RESOURCE_VIDEO3 8 +#define RESOURCE_VIDEO4 16 +#define RESOURCE_VIDEO5 32 +#define RESOURCE_VIDEO6 64 +#define RESOURCE_VIDEO7 128 +#define RESOURCE_VIDEO8 256 +#define RESOURCE_VIDEO9 512 +#define RESOURCE_VIDEO10 1024 +#define RESOURCE_VIDEO11 2048 + +#define BUFFER_TIMEOUT (HZ) /* 0.5 seconds */ + +#define UNKNOWN_BOARD 0 +#define CX25821_BOARD 1 + +/* Currently supported by the driver */ +#define CX25821_NORMS (\ + V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_M_KR | \ + V4L2_STD_PAL_BG | V4L2_STD_PAL_DK | V4L2_STD_PAL_I | \ + V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_H | \ + V4L2_STD_PAL_Nc) + +#define CX25821_BOARD_CONEXANT_ATHENA10 1 +#define MAX_VID_CHANNEL_NUM 12 +#define VID_CHANNEL_NUM 8 + +struct cx25821_fmt { + char *name; + u32 fourcc; /* v4l2 format id */ + int depth; + int flags; + u32 cxformat; +}; + +struct cx25821_tvnorm { + char *name; + v4l2_std_id id; + u32 cxiformat; + u32 cxoformat; +}; + +enum cx25821_src_sel_type { + CX25821_SRC_SEL_EXT_656_VIDEO = 0, + CX25821_SRC_SEL_PARALLEL_MPEG_VIDEO +}; + +/* buffer for one video frame */ +struct cx25821_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + /* cx25821 specific */ + unsigned int bpl; + struct btcx_riscmem risc; + const struct cx25821_fmt *fmt; + u32 count; +}; + +enum port { + CX25821_UNDEFINED = 0, + CX25821_RAW, + CX25821_264 +}; + +struct cx25821_board { + const char *name; + enum port porta; + enum port portb; + enum port portc; + + u32 clk_freq; +}; + +struct cx25821_i2c { + struct cx25821_dev *dev; + + int nr; + + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + u32 i2c_rc; + + /* cx25821 registers used for raw addess */ + u32 i2c_period; + u32 reg_ctrl; + u32 reg_stat; + u32 reg_addr; + u32 reg_rdata; + u32 reg_wdata; +}; + +struct cx25821_dmaqueue { + struct list_head active; + struct list_head queued; + struct timer_list timeout; + struct btcx_riscmem stopper; + u32 count; +}; + +struct cx25821_data { + struct cx25821_dev *dev; + const struct sram_channel *channel; +}; + +struct cx25821_dev; + +struct cx25821_channel; + +struct cx25821_video_out_data { + struct cx25821_channel *chan; + int _line_size; + int _prog_cnt; + int _pixel_format; + int _is_first_frame; + int _is_running; + int _file_status; + int _lines_count; + int _frame_count; + unsigned int _risc_size; + + __le32 *_dma_virt_start_addr; + __le32 *_dma_virt_addr; + dma_addr_t _dma_phys_addr; + dma_addr_t _dma_phys_start_addr; + + unsigned int _data_buf_size; + __le32 *_data_buf_virt_addr; + dma_addr_t _data_buf_phys_addr; + + u32 upstream_riscbuf_size; + u32 upstream_databuf_size; + int is_60hz; + int _frame_index; + int cur_frame_index; + int curpos; + wait_queue_head_t waitq; +}; + +struct cx25821_channel { + unsigned id; + struct cx25821_dev *dev; + struct v4l2_fh *streaming_fh; + + struct v4l2_ctrl_handler hdl; + struct cx25821_data timeout_data; + + struct video_device vdev; + struct cx25821_dmaqueue dma_vidq; + struct videobuf_queue vidq; + + const struct sram_channel *sram_channels; + + const struct cx25821_fmt *fmt; + unsigned int width, height; + int pixel_formats; + int use_cif_resolution; + int cif_width; + + /* video output data for the video output channel */ + struct cx25821_video_out_data *out; +}; + +struct snd_card; + +struct cx25821_dev { + struct v4l2_device v4l2_dev; + + /* pci stuff */ + struct pci_dev *pci; + unsigned char pci_rev, pci_lat; + int pci_bus, pci_slot; + u32 base_io_addr; + u32 __iomem *lmmio; + u8 __iomem *bmmio; + int pci_irqmask; + int hwrevision; + /* used by cx25821-alsa */ + struct snd_card *card; + + u32 clk_freq; + + /* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */ + struct cx25821_i2c i2c_bus[3]; + + int nr; + struct mutex lock; + + struct cx25821_channel channels[MAX_VID_CHANNEL_NUM]; + + /* board details */ + unsigned int board; + char name[32]; + + /* Analog video */ + unsigned int input; + v4l2_std_id tvnorm; + unsigned short _max_num_decoders; + + /* Analog Audio Upstream */ + int _audio_is_running; + int _audiopixel_format; + int _is_first_audio_frame; + int _audiofile_status; + int _audio_lines_count; + int _audioframe_count; + int _audio_upstream_channel; + int _last_index_irq; /* The last interrupt index processed. */ + + __le32 *_risc_audio_jmp_addr; + __le32 *_risc_virt_start_addr; + __le32 *_risc_virt_addr; + dma_addr_t _risc_phys_addr; + dma_addr_t _risc_phys_start_addr; + + unsigned int _audiorisc_size; + unsigned int _audiodata_buf_size; + __le32 *_audiodata_buf_virt_addr; + dma_addr_t _audiodata_buf_phys_addr; + char *_audiofilename; + u32 audio_upstream_riscbuf_size; + u32 audio_upstream_databuf_size; + int _audioframe_index; + struct workqueue_struct *_irq_audio_queues; + struct work_struct _audio_work_entry; + char *input_audiofilename; + + /* V4l */ + spinlock_t slock; + + /* Video Upstream */ + struct cx25821_video_out_data vid_out_data[2]; +}; + +static inline struct cx25821_dev *get_cx25821(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct cx25821_dev, v4l2_dev); +} + +extern struct cx25821_board cx25821_boards[]; + +#define SRAM_CH00 0 /* Video A */ +#define SRAM_CH01 1 /* Video B */ +#define SRAM_CH02 2 /* Video C */ +#define SRAM_CH03 3 /* Video D */ +#define SRAM_CH04 4 /* Video E */ +#define SRAM_CH05 5 /* Video F */ +#define SRAM_CH06 6 /* Video G */ +#define SRAM_CH07 7 /* Video H */ + +#define SRAM_CH08 8 /* Audio A */ +#define SRAM_CH09 9 /* Video Upstream I */ +#define SRAM_CH10 10 /* Video Upstream J */ +#define SRAM_CH11 11 /* Audio Upstream AUD_CHANNEL_B */ + +#define VID_UPSTREAM_SRAM_CHANNEL_I SRAM_CH09 +#define VID_UPSTREAM_SRAM_CHANNEL_J SRAM_CH10 +#define AUDIO_UPSTREAM_SRAM_CHANNEL_B SRAM_CH11 + +struct sram_channel { + char *name; + u32 i; + u32 cmds_start; + u32 ctrl_start; + u32 cdt; + u32 fifo_start; + u32 fifo_size; + u32 ptr1_reg; + u32 ptr2_reg; + u32 cnt1_reg; + u32 cnt2_reg; + u32 int_msk; + u32 int_stat; + u32 int_mstat; + u32 dma_ctl; + u32 gpcnt_ctl; + u32 gpcnt; + u32 aud_length; + u32 aud_cfg; + u32 fld_aud_fifo_en; + u32 fld_aud_risc_en; + + /* For Upstream Video */ + u32 vid_fmt_ctl; + u32 vid_active_ctl1; + u32 vid_active_ctl2; + u32 vid_cdt_size; + + u32 vip_ctl; + u32 pix_frmt; + u32 jumponly; + u32 irq_bit; +}; + +extern const struct sram_channel cx25821_sram_channels[]; + +#define cx_read(reg) readl(dev->lmmio + ((reg)>>2)) +#define cx_write(reg, value) writel((value), dev->lmmio + ((reg)>>2)) + +#define cx_andor(reg, mask, value) \ + writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\ + ((value) & (mask)), dev->lmmio+((reg)>>2)) + +#define cx_set(reg, bit) cx_andor((reg), (bit), (bit)) +#define cx_clear(reg, bit) cx_andor((reg), (bit), 0) + +#define Set_GPIO_Bit(Bit) (1 << Bit) +#define Clear_GPIO_Bit(Bit) (~(1 << Bit)) + +#define CX25821_ERR(fmt, args...) \ + pr_err("(%d): " fmt, dev->board, ##args) +#define CX25821_WARN(fmt, args...) \ + pr_warn("(%d): " fmt, dev->board, ##args) +#define CX25821_INFO(fmt, args...) \ + pr_info("(%d): " fmt, dev->board, ##args) + +extern int cx25821_i2c_register(struct cx25821_i2c *bus); +extern int cx25821_i2c_read(struct cx25821_i2c *bus, u16 reg_addr, int *value); +extern int cx25821_i2c_write(struct cx25821_i2c *bus, u16 reg_addr, int value); +extern int cx25821_i2c_unregister(struct cx25821_i2c *bus); +extern void cx25821_gpio_init(struct cx25821_dev *dev); +extern void cx25821_set_gpiopin_direction(struct cx25821_dev *dev, + int pin_number, int pin_logic_value); + +extern int medusa_video_init(struct cx25821_dev *dev); +extern int medusa_set_videostandard(struct cx25821_dev *dev); +extern void medusa_set_resolution(struct cx25821_dev *dev, int width, + int decoder_select); +extern int medusa_set_brightness(struct cx25821_dev *dev, int brightness, + int decoder); +extern int medusa_set_contrast(struct cx25821_dev *dev, int contrast, + int decoder); +extern int medusa_set_hue(struct cx25821_dev *dev, int hue, int decoder); +extern int medusa_set_saturation(struct cx25821_dev *dev, int saturation, + int decoder); + +extern int cx25821_sram_channel_setup(struct cx25821_dev *dev, + const struct sram_channel *ch, unsigned int bpl, + u32 risc); + +extern int cx25821_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int top_offset, + unsigned int bottom_offset, + unsigned int bpl, + unsigned int padding, unsigned int lines); +extern int cx25821_risc_databuffer_audio(struct pci_dev *pci, + struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int bpl, + unsigned int lines, unsigned int lpi); +extern void cx25821_free_buffer(struct videobuf_queue *q, + struct cx25821_buffer *buf); +extern int cx25821_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value); +extern void cx25821_sram_channel_dump(struct cx25821_dev *dev, + const struct sram_channel *ch); +extern void cx25821_sram_channel_dump_audio(struct cx25821_dev *dev, + const struct sram_channel *ch); + +extern struct cx25821_dev *cx25821_dev_get(struct pci_dev *pci); +extern void cx25821_print_irqbits(char *name, char *tag, char **strings, + int len, u32 bits, u32 mask); +extern void cx25821_dev_unregister(struct cx25821_dev *dev); +extern int cx25821_sram_channel_setup_audio(struct cx25821_dev *dev, + const struct sram_channel *ch, + unsigned int bpl, u32 risc); + +extern int cx25821_vidupstream_init(struct cx25821_channel *chan, int pixel_format); +extern int cx25821_audio_upstream_init(struct cx25821_dev *dev, + int channel_select); +extern int cx25821_write_frame(struct cx25821_channel *chan, + const char __user *data, size_t count); +extern void cx25821_free_mem_upstream(struct cx25821_channel *chan); +extern void cx25821_free_mem_upstream_audio(struct cx25821_dev *dev); +extern void cx25821_stop_upstream_video(struct cx25821_channel *chan); +extern void cx25821_stop_upstream_audio(struct cx25821_dev *dev); +extern int cx25821_sram_channel_setup_upstream(struct cx25821_dev *dev, + const struct sram_channel *ch, + unsigned int bpl, u32 risc); +extern void cx25821_set_pixel_format(struct cx25821_dev *dev, int channel, + u32 format); + +#endif diff --git a/drivers/media/pci/cx88/Kconfig b/drivers/media/pci/cx88/Kconfig new file mode 100644 index 00000000..bb05eca2 --- /dev/null +++ b/drivers/media/pci/cx88/Kconfig @@ -0,0 +1,88 @@ +config VIDEO_CX88 + tristate "Conexant 2388x (bt878 successor) support" + depends on VIDEO_DEV && PCI && I2C && RC_CORE + select I2C_ALGOBIT + select VIDEO_BTCX + select VIDEOBUF_DMA_SG + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_WM8775 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This is a video4linux driver for Conexant 2388x based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called cx8800 + +config VIDEO_CX88_ALSA + tristate "Conexant 2388x DMA audio support" + depends on VIDEO_CX88 && SND + select SND_PCM + ---help--- + This is a video4linux driver for direct (DMA) audio on + Conexant 2388x based TV cards using ALSA. + + It only works with boards with function 01 enabled. + To check if your board supports, use lspci -n. + If supported, you should see 14f1:8801 or 14f1:8811 + PCI device. + + To compile this driver as a module, choose M here: the + module will be called cx88-alsa. + +config VIDEO_CX88_BLACKBIRD + tristate "Blackbird MPEG encoder support (cx2388x + cx23416)" + depends on VIDEO_CX88 + select VIDEO_CX2341X + ---help--- + This adds support for MPEG encoder cards based on the + Blackbird reference design, using the Conexant 2388x + and 23416 chips. + + To compile this driver as a module, choose M here: the + module will be called cx88-blackbird. + +config VIDEO_CX88_DVB + tristate "DVB/ATSC Support for cx2388x based TV cards" + depends on VIDEO_CX88 && DVB_CORE + select VIDEOBUF_DVB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_OR51132 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This adds support for DVB/ATSC cards based on the + Conexant 2388x chip. + + To compile this driver as a module, choose M here: the + module will be called cx88-dvb. + +config VIDEO_CX88_VP3054 + tristate "VP-3054 Secondary I2C Bus Support" + default m + depends on VIDEO_CX88_DVB && DVB_MT352 + ---help--- + This adds DVB-T support for cards based on the + Conexant 2388x chip and the MT352 demodulator, + which also require support for the VP-3054 + Secondary I2C bus, such at DNTV Live! DVB-T Pro. + +config VIDEO_CX88_MPEG + tristate + depends on VIDEO_CX88_DVB || VIDEO_CX88_BLACKBIRD + default y diff --git a/drivers/media/pci/cx88/Makefile b/drivers/media/pci/cx88/Makefile new file mode 100644 index 00000000..8619c1be --- /dev/null +++ b/drivers/media/pci/cx88/Makefile @@ -0,0 +1,17 @@ +cx88xx-objs := cx88-cards.o cx88-core.o cx88-i2c.o cx88-tvaudio.o \ + cx88-dsp.o cx88-input.o +cx8800-objs := cx88-video.o cx88-vbi.o +cx8802-objs := cx88-mpeg.o + +obj-$(CONFIG_VIDEO_CX88) += cx88xx.o cx8800.o +obj-$(CONFIG_VIDEO_CX88_MPEG) += cx8802.o +obj-$(CONFIG_VIDEO_CX88_ALSA) += cx88-alsa.o +obj-$(CONFIG_VIDEO_CX88_BLACKBIRD) += cx88-blackbird.o +obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o +obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o + +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/common +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c new file mode 100644 index 00000000..aba5b1c6 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-alsa.c @@ -0,0 +1,977 @@ +/* + * + * Support for audio capture + * PCI function #1 of the cx2388x. + * + * (c) 2007 Trent Piepho + * (c) 2005,2006 Ricardo Cerqueira + * (c) 2005 Mauro Carvalho Chehab + * Based on a dummy cx88 module by Gerd Knorr + * Based on dummy.c by Jaroslav Kysela + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx88.h" +#include "cx88-reg.h" + +#define dprintk(level, fmt, arg...) do { \ + if (debug + 1 > level) \ + printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg);\ +} while(0) + +#define dprintk_core(level, fmt, arg...) do { \ + if (debug + 1 > level) \ + printk(KERN_DEBUG "%s/1: " fmt, chip->core->name , ## arg);\ +} while(0) + +/**************************************************************************** + Data type declarations - Can be moded to a header file later + ****************************************************************************/ + +struct cx88_audio_buffer { + unsigned int bpl; + struct btcx_riscmem risc; + struct videobuf_dmabuf dma; +}; + +struct cx88_audio_dev { + struct cx88_core *core; + struct cx88_dmaqueue q; + + /* pci i/o */ + struct pci_dev *pci; + + /* audio controls */ + int irq; + + struct snd_card *card; + + spinlock_t reg_lock; + atomic_t count; + + unsigned int dma_size; + unsigned int period_size; + unsigned int num_periods; + + struct videobuf_dmabuf *dma_risc; + + struct cx88_audio_buffer *buf; + + struct snd_pcm_substream *substream; +}; +typedef struct cx88_audio_dev snd_cx88_card_t; + + + +/**************************************************************************** + Module global static vars + ****************************************************************************/ + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ +static const char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ +static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; + +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable cx88x soundcard. default enabled."); + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for cx88x capture interface(s)."); + + +/**************************************************************************** + Module macros + ****************************************************************************/ + +MODULE_DESCRIPTION("ALSA driver module for cx2388x based TV cards"); +MODULE_AUTHOR("Ricardo Cerqueira"); +MODULE_AUTHOR("Mauro Carvalho Chehab "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); + +MODULE_SUPPORTED_DEVICE("{{Conexant,23881}," + "{{Conexant,23882}," + "{{Conexant,23883}"); +static unsigned int debug; +module_param(debug,int,0644); +MODULE_PARM_DESC(debug,"enable debug messages"); + +/**************************************************************************** + Module specific funtions + ****************************************************************************/ + +/* + * BOARD Specific: Sets audio DMA + */ + +static int _cx88_start_audio_dma(snd_cx88_card_t *chip) +{ + struct cx88_audio_buffer *buf = chip->buf; + struct cx88_core *core=chip->core; + const struct sram_channel *audio_ch = &cx88_sram_channels[SRAM_CH25]; + + /* Make sure RISC/FIFO are off before changing FIFO/RISC settings */ + cx_clear(MO_AUD_DMACNTRL, 0x11); + + /* setup fifo + format - out channel */ + cx88_sram_channel_setup(chip->core, audio_ch, buf->bpl, buf->risc.dma); + + /* sets bpl size */ + cx_write(MO_AUDD_LNGTH, buf->bpl); + + /* reset counter */ + cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET); + atomic_set(&chip->count, 0); + + dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d " + "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1, + chip->num_periods, buf->bpl * chip->num_periods); + + /* Enables corresponding bits at AUD_INT_STAT */ + cx_write(MO_AUD_INTMSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1); + + /* Clean any pending interrupt bits already set */ + cx_write(MO_AUD_INTSTAT, ~0); + + /* enable audio irqs */ + cx_set(MO_PCI_INTMSK, chip->core->pci_irqmask | PCI_INT_AUDINT); + + /* start dma */ + cx_set(MO_DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */ + cx_set(MO_AUD_DMACNTRL, 0x11); /* audio downstream FIFO and RISC enable */ + + if (debug) + cx88_sram_channel_dump(chip->core, audio_ch); + + return 0; +} + +/* + * BOARD Specific: Resets audio DMA + */ +static int _cx88_stop_audio_dma(snd_cx88_card_t *chip) +{ + struct cx88_core *core=chip->core; + dprintk(1, "Stopping audio DMA\n"); + + /* stop dma */ + cx_clear(MO_AUD_DMACNTRL, 0x11); + + /* disable irqs */ + cx_clear(MO_PCI_INTMSK, PCI_INT_AUDINT); + cx_clear(MO_AUD_INTMSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1); + + if (debug) + cx88_sram_channel_dump(chip->core, &cx88_sram_channels[SRAM_CH25]); + + return 0; +} + +#define MAX_IRQ_LOOP 50 + +/* + * BOARD Specific: IRQ dma bits + */ +static const char *cx88_aud_irqs[32] = { + "dn_risci1", "up_risci1", "rds_dn_risc1", /* 0-2 */ + NULL, /* reserved */ + "dn_risci2", "up_risci2", "rds_dn_risc2", /* 4-6 */ + NULL, /* reserved */ + "dnf_of", "upf_uf", "rds_dnf_uf", /* 8-10 */ + NULL, /* reserved */ + "dn_sync", "up_sync", "rds_dn_sync", /* 12-14 */ + NULL, /* reserved */ + "opc_err", "par_err", "rip_err", /* 16-18 */ + "pci_abort", "ber_irq", "mchg_irq" /* 19-21 */ +}; + +/* + * BOARD Specific: Threats IRQ audio specific calls + */ +static void cx8801_aud_irq(snd_cx88_card_t *chip) +{ + struct cx88_core *core = chip->core; + u32 status, mask; + + status = cx_read(MO_AUD_INTSTAT); + mask = cx_read(MO_AUD_INTMSK); + if (0 == (status & mask)) + return; + cx_write(MO_AUD_INTSTAT, status); + if (debug > 1 || (status & mask & ~0xff)) + cx88_print_irqbits(core->name, "irq aud", + cx88_aud_irqs, ARRAY_SIZE(cx88_aud_irqs), + status, mask); + /* risc op code error */ + if (status & AUD_INT_OPC_ERR) { + printk(KERN_WARNING "%s/1: Audio risc op code error\n",core->name); + cx_clear(MO_AUD_DMACNTRL, 0x11); + cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH25]); + } + if (status & AUD_INT_DN_SYNC) { + dprintk(1, "Downstream sync error\n"); + cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET); + return; + } + /* risc1 downstream */ + if (status & AUD_INT_DN_RISCI1) { + atomic_set(&chip->count, cx_read(MO_AUDD_GPCNT)); + snd_pcm_period_elapsed(chip->substream); + } + /* FIXME: Any other status should deserve a special handling? */ +} + +/* + * BOARD Specific: Handles IRQ calls + */ +static irqreturn_t cx8801_irq(int irq, void *dev_id) +{ + snd_cx88_card_t *chip = dev_id; + struct cx88_core *core = chip->core; + u32 status; + int loop, handled = 0; + + for (loop = 0; loop < MAX_IRQ_LOOP; loop++) { + status = cx_read(MO_PCI_INTSTAT) & + (core->pci_irqmask | PCI_INT_AUDINT); + if (0 == status) + goto out; + dprintk(3, "cx8801_irq loop %d/%d, status %x\n", + loop, MAX_IRQ_LOOP, status); + handled = 1; + cx_write(MO_PCI_INTSTAT, status); + + if (status & core->pci_irqmask) + cx88_core_irq(core, status); + if (status & PCI_INT_AUDINT) + cx8801_aud_irq(chip); + } + + if (MAX_IRQ_LOOP == loop) { + printk(KERN_ERR + "%s/1: IRQ loop detected, disabling interrupts\n", + core->name); + cx_clear(MO_PCI_INTMSK, PCI_INT_AUDINT); + } + + out: + return IRQ_RETVAL(handled); +} + + +static int dsp_buffer_free(snd_cx88_card_t *chip) +{ + BUG_ON(!chip->dma_size); + + dprintk(2,"Freeing buffer\n"); + videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc); + videobuf_dma_free(chip->dma_risc); + btcx_riscmem_free(chip->pci,&chip->buf->risc); + kfree(chip->buf); + + chip->dma_risc = NULL; + chip->dma_size = 0; + + return 0; +} + +/**************************************************************************** + ALSA PCM Interface + ****************************************************************************/ + +/* + * Digital hardware definition + */ +#define DEFAULT_FIFO_SIZE 4096 +static const struct snd_pcm_hardware snd_cx88_digital_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + /* Analog audio output will be full of clicks and pops if there + are not exactly four lines in the SRAM FIFO buffer. */ + .period_bytes_min = DEFAULT_FIFO_SIZE/4, + .period_bytes_max = DEFAULT_FIFO_SIZE/4, + .periods_min = 1, + .periods_max = 1024, + .buffer_bytes_max = (1024*1024), +}; + +/* + * audio pcm capture open callback + */ +static int snd_cx88_pcm_open(struct snd_pcm_substream *substream) +{ + snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int err; + + if (!chip) { + printk(KERN_ERR "BUG: cx88 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + + err = snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + goto _error; + + chip->substream = substream; + + runtime->hw = snd_cx88_digital_hw; + + if (cx88_sram_channels[SRAM_CH25].fifo_size != DEFAULT_FIFO_SIZE) { + unsigned int bpl = cx88_sram_channels[SRAM_CH25].fifo_size / 4; + bpl &= ~7; /* must be multiple of 8 */ + runtime->hw.period_bytes_min = bpl; + runtime->hw.period_bytes_max = bpl; + } + + return 0; +_error: + dprintk(1,"Error opening PCM!\n"); + return err; +} + +/* + * audio close callback + */ +static int snd_cx88_close(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * hw_params callback + */ +static int snd_cx88_hw_params(struct snd_pcm_substream * substream, + struct snd_pcm_hw_params * hw_params) +{ + snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); + struct videobuf_dmabuf *dma; + + struct cx88_audio_buffer *buf; + int ret; + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + chip->period_size = params_period_bytes(hw_params); + chip->num_periods = params_periods(hw_params); + chip->dma_size = chip->period_size * params_periods(hw_params); + + BUG_ON(!chip->dma_size); + BUG_ON(chip->num_periods & (chip->num_periods-1)); + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (NULL == buf) + return -ENOMEM; + + buf->bpl = chip->period_size; + + dma = &buf->dma; + videobuf_dma_init(dma); + ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE, + (PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT)); + if (ret < 0) + goto error; + + ret = videobuf_dma_map(&chip->pci->dev, dma); + if (ret < 0) + goto error; + + ret = cx88_risc_databuffer(chip->pci, &buf->risc, dma->sglist, + chip->period_size, chip->num_periods, 1); + if (ret < 0) + goto error; + + /* Loop back to start of program */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + + chip->buf = buf; + chip->dma_risc = dma; + + substream->runtime->dma_area = chip->dma_risc->vaddr; + substream->runtime->dma_bytes = chip->dma_size; + substream->runtime->dma_addr = 0; + return 0; + +error: + kfree(buf); + return ret; +} + +/* + * hw free callback + */ +static int snd_cx88_hw_free(struct snd_pcm_substream * substream) +{ + + snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + return 0; +} + +/* + * prepare callback + */ +static int snd_cx88_prepare(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * trigger callback + */ +static int snd_cx88_card_trigger(struct snd_pcm_substream *substream, int cmd) +{ + snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); + int err; + + /* Local interrupts are already disabled by ALSA */ + spin_lock(&chip->reg_lock); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + err=_cx88_start_audio_dma(chip); + break; + case SNDRV_PCM_TRIGGER_STOP: + err=_cx88_stop_audio_dma(chip); + break; + default: + err=-EINVAL; + break; + } + + spin_unlock(&chip->reg_lock); + + return err; +} + +/* + * pointer callback + */ +static snd_pcm_uframes_t snd_cx88_pointer(struct snd_pcm_substream *substream) +{ + snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + u16 count; + + count = atomic_read(&chip->count); + +// dprintk(2, "%s - count %d (+%u), period %d, frame %lu\n", __func__, +// count, new, count & (runtime->periods-1), +// runtime->period_size * (count & (runtime->periods-1))); + return runtime->period_size * (count & (runtime->periods-1)); +} + +/* + * page callback (needed for mmap) + */ +static struct page *snd_cx88_page(struct snd_pcm_substream *substream, + unsigned long offset) +{ + void *pageptr = substream->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); +} + +/* + * operators + */ +static struct snd_pcm_ops snd_cx88_pcm_ops = { + .open = snd_cx88_pcm_open, + .close = snd_cx88_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_cx88_hw_params, + .hw_free = snd_cx88_hw_free, + .prepare = snd_cx88_prepare, + .trigger = snd_cx88_card_trigger, + .pointer = snd_cx88_pointer, + .page = snd_cx88_page, +}; + +/* + * create a PCM device + */ +static int snd_cx88_pcm(snd_cx88_card_t *chip, int device, const char *name) +{ + int err; + struct snd_pcm *pcm; + + err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm); + if (err < 0) + return err; + pcm->private_data = chip; + strcpy(pcm->name, name); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx88_pcm_ops); + + return 0; +} + +/**************************************************************************** + CONTROL INTERFACE + ****************************************************************************/ +static int snd_cx88_volume_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *info) +{ + info->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + info->count = 2; + info->value.integer.min = 0; + info->value.integer.max = 0x3f; + + return 0; +} + +static int snd_cx88_volume_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core=chip->core; + int vol = 0x3f - (cx_read(AUD_VOL_CTL) & 0x3f), + bal = cx_read(AUD_BAL_CTL); + + value->value.integer.value[(bal & 0x40) ? 0 : 1] = vol; + vol -= (bal & 0x3f); + value->value.integer.value[(bal & 0x40) ? 1 : 0] = vol < 0 ? 0 : vol; + + return 0; +} + +static void snd_cx88_wm8775_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core = chip->core; + int left = value->value.integer.value[0]; + int right = value->value.integer.value[1]; + int v, b; + + /* Pass volume & balance onto any WM8775 */ + if (left >= right) { + v = left << 10; + b = left ? (0x8000 * right) / left : 0x8000; + } else { + v = right << 10; + b = right ? 0xffff - (0x8000 * left) / right : 0x8000; + } + wm8775_s_ctrl(core, V4L2_CID_AUDIO_VOLUME, v); + wm8775_s_ctrl(core, V4L2_CID_AUDIO_BALANCE, b); +} + +/* OK - TODO: test it */ +static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core=chip->core; + int left, right, v, b; + int changed = 0; + u32 old; + + if (core->sd_wm8775) + snd_cx88_wm8775_volume_put(kcontrol, value); + + left = value->value.integer.value[0] & 0x3f; + right = value->value.integer.value[1] & 0x3f; + b = right - left; + if (b < 0) { + v = 0x3f - left; + b = (-b) | 0x40; + } else { + v = 0x3f - right; + } + /* Do we really know this will always be called with IRQs on? */ + spin_lock_irq(&chip->reg_lock); + old = cx_read(AUD_VOL_CTL); + if (v != (old & 0x3f)) { + cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, (old & ~0x3f) | v); + changed = 1; + } + if ((cx_read(AUD_BAL_CTL) & 0x7f) != b) { + cx_write(AUD_BAL_CTL, b); + changed = 1; + } + spin_unlock_irq(&chip->reg_lock); + + return changed; +} + +static const DECLARE_TLV_DB_SCALE(snd_cx88_db_scale, -6300, 100, 0); + +static const struct snd_kcontrol_new snd_cx88_volume = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .name = "Analog-TV Volume", + .info = snd_cx88_volume_info, + .get = snd_cx88_volume_get, + .put = snd_cx88_volume_put, + .tlv.p = snd_cx88_db_scale, +}; + +static int snd_cx88_switch_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core = chip->core; + u32 bit = kcontrol->private_value; + + value->value.integer.value[0] = !(cx_read(AUD_VOL_CTL) & bit); + return 0; +} + +static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core = chip->core; + u32 bit = kcontrol->private_value; + int ret = 0; + u32 vol; + + spin_lock_irq(&chip->reg_lock); + vol = cx_read(AUD_VOL_CTL); + if (value->value.integer.value[0] != !(vol & bit)) { + vol ^= bit; + cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol); + /* Pass mute onto any WM8775 */ + if (core->sd_wm8775 && ((1<<6) == bit)) + wm8775_s_ctrl(core, V4L2_CID_AUDIO_MUTE, 0 != (vol & bit)); + ret = 1; + } + spin_unlock_irq(&chip->reg_lock); + return ret; +} + +static const struct snd_kcontrol_new snd_cx88_dac_switch = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Audio-Out Switch", + .info = snd_ctl_boolean_mono_info, + .get = snd_cx88_switch_get, + .put = snd_cx88_switch_put, + .private_value = (1<<8), +}; + +static const struct snd_kcontrol_new snd_cx88_source_switch = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog-TV Switch", + .info = snd_ctl_boolean_mono_info, + .get = snd_cx88_switch_get, + .put = snd_cx88_switch_put, + .private_value = (1<<6), +}; + +static int snd_cx88_alc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core = chip->core; + s32 val; + + val = wm8775_g_ctrl(core, V4L2_CID_AUDIO_LOUDNESS); + value->value.integer.value[0] = val ? 1 : 0; + return 0; +} + +static int snd_cx88_alc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core = chip->core; + struct v4l2_control client_ctl; + + memset(&client_ctl, 0, sizeof(client_ctl)); + client_ctl.value = 0 != value->value.integer.value[0]; + client_ctl.id = V4L2_CID_AUDIO_LOUDNESS; + call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); + + return 0; +} + +static struct snd_kcontrol_new snd_cx88_alc_switch = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line-In ALC Switch", + .info = snd_ctl_boolean_mono_info, + .get = snd_cx88_alc_get, + .put = snd_cx88_alc_put, +}; + +/**************************************************************************** + Basic Flow for Sound Devices + ****************************************************************************/ + +/* + * PCI ID Table - 14f1:8801 and 14f1:8811 means function 1: Audio + * Only boards with eeprom and byte 1 at eeprom=1 have it + */ + +static const struct pci_device_id cx88_audio_pci_tbl[] = { + {0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0}, + {0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0}, + {0, } +}; +MODULE_DEVICE_TABLE(pci, cx88_audio_pci_tbl); + +/* + * Chip-specific destructor + */ + +static int snd_cx88_free(snd_cx88_card_t *chip) +{ + + if (chip->irq >= 0) + free_irq(chip->irq, chip); + + cx88_core_put(chip->core,chip->pci); + + pci_disable_device(chip->pci); + return 0; +} + +/* + * Component Destructor + */ +static void snd_cx88_dev_free(struct snd_card * card) +{ + snd_cx88_card_t *chip = card->private_data; + + snd_cx88_free(chip); +} + + +/* + * Alsa Constructor - Component probe + */ + +static int devno; +static int snd_cx88_create(struct snd_card *card, struct pci_dev *pci, + snd_cx88_card_t **rchip, + struct cx88_core **core_ptr) +{ + snd_cx88_card_t *chip; + struct cx88_core *core; + int err; + unsigned char pci_lat; + + *rchip = NULL; + + err = pci_enable_device(pci); + if (err < 0) + return err; + + pci_set_master(pci); + + chip = card->private_data; + + core = cx88_core_get(pci); + if (NULL == core) { + err = -EINVAL; + return err; + } + + if (!pci_dma_supported(pci,DMA_BIT_MASK(32))) { + dprintk(0, "%s/1: Oops: no 32bit PCI DMA ???\n",core->name); + err = -EIO; + cx88_core_put(core, pci); + return err; + } + + + /* pci init */ + chip->card = card; + chip->pci = pci; + chip->irq = -1; + spin_lock_init(&chip->reg_lock); + + chip->core = core; + + /* get irq */ + err = request_irq(chip->pci->irq, cx8801_irq, + IRQF_SHARED | IRQF_DISABLED, chip->core->name, chip); + if (err < 0) { + dprintk(0, "%s: can't get IRQ %d\n", + chip->core->name, chip->pci->irq); + return err; + } + + /* print pci info */ + pci_read_config_byte(pci, PCI_LATENCY_TIMER, &pci_lat); + + dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", core->name, devno, + pci_name(pci), pci->revision, pci->irq, + pci_lat, (unsigned long long)pci_resource_start(pci,0)); + + chip->irq = pci->irq; + synchronize_irq(chip->irq); + + snd_card_set_dev(card, &pci->dev); + + *rchip = chip; + *core_ptr = core; + + return 0; +} + +static int cx88_audio_initdev(struct pci_dev *pci, + const struct pci_device_id *pci_id) +{ + struct snd_card *card; + snd_cx88_card_t *chip; + struct cx88_core *core = NULL; + int err; + + if (devno >= SNDRV_CARDS) + return (-ENODEV); + + if (!enable[devno]) { + ++devno; + return (-ENOENT); + } + + err = snd_card_create(index[devno], id[devno], THIS_MODULE, + sizeof(snd_cx88_card_t), &card); + if (err < 0) + return err; + + card->private_free = snd_cx88_dev_free; + + err = snd_cx88_create(card, pci, &chip, &core); + if (err < 0) + goto error; + + err = snd_cx88_pcm(chip, 0, "CX88 Digital"); + if (err < 0) + goto error; + + err = snd_ctl_add(card, snd_ctl_new1(&snd_cx88_volume, chip)); + if (err < 0) + goto error; + err = snd_ctl_add(card, snd_ctl_new1(&snd_cx88_dac_switch, chip)); + if (err < 0) + goto error; + err = snd_ctl_add(card, snd_ctl_new1(&snd_cx88_source_switch, chip)); + if (err < 0) + goto error; + + /* If there's a wm8775 then add a Line-In ALC switch */ + if (core->sd_wm8775) + snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch, chip)); + + strcpy (card->driver, "CX88x"); + sprintf(card->shortname, "Conexant CX%x", pci->device); + sprintf(card->longname, "%s at %#llx", + card->shortname,(unsigned long long)pci_resource_start(pci, 0)); + strcpy (card->mixername, "CX88"); + + dprintk (0, "%s/%i: ALSA support for cx2388x boards\n", + card->driver,devno); + + err = snd_card_register(card); + if (err < 0) + goto error; + pci_set_drvdata(pci,card); + + devno++; + return 0; + +error: + snd_card_free(card); + return err; +} +/* + * ALSA destructor + */ +static void cx88_audio_finidev(struct pci_dev *pci) +{ + struct cx88_audio_dev *card = pci_get_drvdata(pci); + + snd_card_free((void *)card); + + pci_set_drvdata(pci, NULL); + + devno--; +} + +/* + * PCI driver definition + */ + +static struct pci_driver cx88_audio_pci_driver = { + .name = "cx88_audio", + .id_table = cx88_audio_pci_tbl, + .probe = cx88_audio_initdev, + .remove = cx88_audio_finidev, +}; + +/**************************************************************************** + LINUX MODULE INIT + ****************************************************************************/ + +/* + * module init + */ +static int __init cx88_audio_init(void) +{ + printk(KERN_INFO "cx2388x alsa driver version %s loaded\n", + CX88_VERSION); + return pci_register_driver(&cx88_audio_pci_driver); +} + +/* + * module remove + */ +static void __exit cx88_audio_fini(void) +{ + pci_unregister_driver(&cx88_audio_pci_driver); +} + +module_init(cx88_audio_init); +module_exit(cx88_audio_fini); diff --git a/drivers/media/pci/cx88/cx88-blackbird.c b/drivers/media/pci/cx88/cx88-blackbird.c new file mode 100644 index 00000000..150bb76e --- /dev/null +++ b/drivers/media/pci/cx88/cx88-blackbird.c @@ -0,0 +1,1300 @@ +/* + * + * Support for a cx23416 mpeg encoder via cx2388x host port. + * "blackbird" reference design. + * + * (c) 2004 Jelle Foks + * (c) 2004 Gerd Knorr + * + * (c) 2005-2006 Mauro Carvalho Chehab + * - video_ioctl2 conversion + * + * Includes parts from the ivtv driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx88.h" + +MODULE_DESCRIPTION("driver for cx2388x/cx23416 based mpeg encoder cards"); +MODULE_AUTHOR("Jelle Foks , Gerd Knorr [SuSE Labs]"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); + +static unsigned int mpegbufs = 32; +module_param(mpegbufs,int,0644); +MODULE_PARM_DESC(mpegbufs,"number of mpeg buffers, range 2-32"); + +static unsigned int debug; +module_param(debug,int,0644); +MODULE_PARM_DESC(debug,"enable debug messages [blackbird]"); + +#define dprintk(level, fmt, arg...) do { \ + if (debug + 1 > level) \ + printk(KERN_DEBUG "%s/2-bb: " fmt, dev->core->name , ## arg); \ +} while(0) + +/* ------------------------------------------------------------------ */ + +#define BLACKBIRD_FIRM_IMAGE_SIZE 376836 + +/* defines below are from ivtv-driver.h */ + +#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF + +/* Firmware API commands */ +#define IVTV_API_STD_TIMEOUT 500 + +enum blackbird_capture_type { + BLACKBIRD_MPEG_CAPTURE, + BLACKBIRD_RAW_CAPTURE, + BLACKBIRD_RAW_PASSTHRU_CAPTURE +}; +enum blackbird_capture_bits { + BLACKBIRD_RAW_BITS_NONE = 0x00, + BLACKBIRD_RAW_BITS_YUV_CAPTURE = 0x01, + BLACKBIRD_RAW_BITS_PCM_CAPTURE = 0x02, + BLACKBIRD_RAW_BITS_VBI_CAPTURE = 0x04, + BLACKBIRD_RAW_BITS_PASSTHRU_CAPTURE = 0x08, + BLACKBIRD_RAW_BITS_TO_HOST_CAPTURE = 0x10 +}; +enum blackbird_capture_end { + BLACKBIRD_END_AT_GOP, /* stop at the end of gop, generate irq */ + BLACKBIRD_END_NOW, /* stop immediately, no irq */ +}; +enum blackbird_framerate { + BLACKBIRD_FRAMERATE_NTSC_30, /* NTSC: 30fps */ + BLACKBIRD_FRAMERATE_PAL_25 /* PAL: 25fps */ +}; +enum blackbird_stream_port { + BLACKBIRD_OUTPUT_PORT_MEMORY, + BLACKBIRD_OUTPUT_PORT_STREAMING, + BLACKBIRD_OUTPUT_PORT_SERIAL +}; +enum blackbird_data_xfer_status { + BLACKBIRD_MORE_BUFFERS_FOLLOW, + BLACKBIRD_LAST_BUFFER, +}; +enum blackbird_picture_mask { + BLACKBIRD_PICTURE_MASK_NONE, + BLACKBIRD_PICTURE_MASK_I_FRAMES, + BLACKBIRD_PICTURE_MASK_I_P_FRAMES = 0x3, + BLACKBIRD_PICTURE_MASK_ALL_FRAMES = 0x7, +}; +enum blackbird_vbi_mode_bits { + BLACKBIRD_VBI_BITS_SLICED, + BLACKBIRD_VBI_BITS_RAW, +}; +enum blackbird_vbi_insertion_bits { + BLACKBIRD_VBI_BITS_INSERT_IN_XTENSION_USR_DATA, + BLACKBIRD_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1, + BLACKBIRD_VBI_BITS_SEPARATE_STREAM = 0x2 << 1, + BLACKBIRD_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1, + BLACKBIRD_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1, +}; +enum blackbird_dma_unit { + BLACKBIRD_DMA_BYTES, + BLACKBIRD_DMA_FRAMES, +}; +enum blackbird_dma_transfer_status_bits { + BLACKBIRD_DMA_TRANSFER_BITS_DONE = 0x01, + BLACKBIRD_DMA_TRANSFER_BITS_ERROR = 0x04, + BLACKBIRD_DMA_TRANSFER_BITS_LL_ERROR = 0x10, +}; +enum blackbird_pause { + BLACKBIRD_PAUSE_ENCODING, + BLACKBIRD_RESUME_ENCODING, +}; +enum blackbird_copyright { + BLACKBIRD_COPYRIGHT_OFF, + BLACKBIRD_COPYRIGHT_ON, +}; +enum blackbird_notification_type { + BLACKBIRD_NOTIFICATION_REFRESH, +}; +enum blackbird_notification_status { + BLACKBIRD_NOTIFICATION_OFF, + BLACKBIRD_NOTIFICATION_ON, +}; +enum blackbird_notification_mailbox { + BLACKBIRD_NOTIFICATION_NO_MAILBOX = -1, +}; +enum blackbird_field1_lines { + BLACKBIRD_FIELD1_SAA7114 = 0x00EF, /* 239 */ + BLACKBIRD_FIELD1_SAA7115 = 0x00F0, /* 240 */ + BLACKBIRD_FIELD1_MICRONAS = 0x0105, /* 261 */ +}; +enum blackbird_field2_lines { + BLACKBIRD_FIELD2_SAA7114 = 0x00EF, /* 239 */ + BLACKBIRD_FIELD2_SAA7115 = 0x00F0, /* 240 */ + BLACKBIRD_FIELD2_MICRONAS = 0x0106, /* 262 */ +}; +enum blackbird_custom_data_type { + BLACKBIRD_CUSTOM_EXTENSION_USR_DATA, + BLACKBIRD_CUSTOM_PRIVATE_PACKET, +}; +enum blackbird_mute { + BLACKBIRD_UNMUTE, + BLACKBIRD_MUTE, +}; +enum blackbird_mute_video_mask { + BLACKBIRD_MUTE_VIDEO_V_MASK = 0x0000FF00, + BLACKBIRD_MUTE_VIDEO_U_MASK = 0x00FF0000, + BLACKBIRD_MUTE_VIDEO_Y_MASK = 0xFF000000, +}; +enum blackbird_mute_video_shift { + BLACKBIRD_MUTE_VIDEO_V_SHIFT = 8, + BLACKBIRD_MUTE_VIDEO_U_SHIFT = 16, + BLACKBIRD_MUTE_VIDEO_Y_SHIFT = 24, +}; + +/* Registers */ +#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8 /*| IVTV_REG_OFFSET*/) +#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC /*| IVTV_REG_OFFSET*/) +#define IVTV_REG_SPU (0x9050 /*| IVTV_REG_OFFSET*/) +#define IVTV_REG_HW_BLOCKS (0x9054 /*| IVTV_REG_OFFSET*/) +#define IVTV_REG_VPU (0x9058 /*| IVTV_REG_OFFSET*/) +#define IVTV_REG_APU (0xA064 /*| IVTV_REG_OFFSET*/) + +/* ------------------------------------------------------------------ */ + +static void host_setup(struct cx88_core *core) +{ + /* toggle reset of the host */ + cx_write(MO_GPHST_SOFT_RST, 1); + udelay(100); + cx_write(MO_GPHST_SOFT_RST, 0); + udelay(100); + + /* host port setup */ + cx_write(MO_GPHST_WSC, 0x44444444U); + cx_write(MO_GPHST_XFR, 0); + cx_write(MO_GPHST_WDTH, 15); + cx_write(MO_GPHST_HDSHK, 0); + cx_write(MO_GPHST_MUX16, 0x44448888U); + cx_write(MO_GPHST_MODE, 0); +} + +/* ------------------------------------------------------------------ */ + +#define P1_MDATA0 0x390000 +#define P1_MDATA1 0x390001 +#define P1_MDATA2 0x390002 +#define P1_MDATA3 0x390003 +#define P1_MADDR2 0x390004 +#define P1_MADDR1 0x390005 +#define P1_MADDR0 0x390006 +#define P1_RDATA0 0x390008 +#define P1_RDATA1 0x390009 +#define P1_RDATA2 0x39000A +#define P1_RDATA3 0x39000B +#define P1_RADDR0 0x39000C +#define P1_RADDR1 0x39000D +#define P1_RRDWR 0x39000E + +static int wait_ready_gpio0_bit1(struct cx88_core *core, u32 state) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1); + u32 gpio0,need; + + need = state ? 2 : 0; + for (;;) { + gpio0 = cx_read(MO_GP0_IO) & 2; + if (need == gpio0) + return 0; + if (time_after(jiffies,timeout)) + return -1; + udelay(1); + } +} + +static int memory_write(struct cx88_core *core, u32 address, u32 value) +{ + /* Warning: address is dword address (4 bytes) */ + cx_writeb(P1_MDATA0, (unsigned int)value); + cx_writeb(P1_MDATA1, (unsigned int)(value >> 8)); + cx_writeb(P1_MDATA2, (unsigned int)(value >> 16)); + cx_writeb(P1_MDATA3, (unsigned int)(value >> 24)); + cx_writeb(P1_MADDR2, (unsigned int)(address >> 16) | 0x40); + cx_writeb(P1_MADDR1, (unsigned int)(address >> 8)); + cx_writeb(P1_MADDR0, (unsigned int)address); + cx_read(P1_MDATA0); + cx_read(P1_MADDR0); + + return wait_ready_gpio0_bit1(core,1); +} + +static int memory_read(struct cx88_core *core, u32 address, u32 *value) +{ + int retval; + u32 val; + + /* Warning: address is dword address (4 bytes) */ + cx_writeb(P1_MADDR2, (unsigned int)(address >> 16) & ~0xC0); + cx_writeb(P1_MADDR1, (unsigned int)(address >> 8)); + cx_writeb(P1_MADDR0, (unsigned int)address); + cx_read(P1_MADDR0); + + retval = wait_ready_gpio0_bit1(core,1); + + cx_writeb(P1_MDATA3, 0); + val = (unsigned char)cx_read(P1_MDATA3) << 24; + cx_writeb(P1_MDATA2, 0); + val |= (unsigned char)cx_read(P1_MDATA2) << 16; + cx_writeb(P1_MDATA1, 0); + val |= (unsigned char)cx_read(P1_MDATA1) << 8; + cx_writeb(P1_MDATA0, 0); + val |= (unsigned char)cx_read(P1_MDATA0); + + *value = val; + return retval; +} + +static int register_write(struct cx88_core *core, u32 address, u32 value) +{ + cx_writeb(P1_RDATA0, (unsigned int)value); + cx_writeb(P1_RDATA1, (unsigned int)(value >> 8)); + cx_writeb(P1_RDATA2, (unsigned int)(value >> 16)); + cx_writeb(P1_RDATA3, (unsigned int)(value >> 24)); + cx_writeb(P1_RADDR0, (unsigned int)address); + cx_writeb(P1_RADDR1, (unsigned int)(address >> 8)); + cx_writeb(P1_RRDWR, 1); + cx_read(P1_RDATA0); + cx_read(P1_RADDR0); + + return wait_ready_gpio0_bit1(core,1); +} + + +static int register_read(struct cx88_core *core, u32 address, u32 *value) +{ + int retval; + u32 val; + + cx_writeb(P1_RADDR0, (unsigned int)address); + cx_writeb(P1_RADDR1, (unsigned int)(address >> 8)); + cx_writeb(P1_RRDWR, 0); + cx_read(P1_RADDR0); + + retval = wait_ready_gpio0_bit1(core,1); + val = (unsigned char)cx_read(P1_RDATA0); + val |= (unsigned char)cx_read(P1_RDATA1) << 8; + val |= (unsigned char)cx_read(P1_RDATA2) << 16; + val |= (unsigned char)cx_read(P1_RDATA3) << 24; + + *value = val; + return retval; +} + +/* ------------------------------------------------------------------ */ + +static int blackbird_mbox_func(void *priv, u32 command, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]) +{ + struct cx8802_dev *dev = priv; + unsigned long timeout; + u32 value, flag, retval; + int i; + + dprintk(1,"%s: 0x%X\n", __func__, command); + + /* this may not be 100% safe if we can't read any memory location + without side effects */ + memory_read(dev->core, dev->mailbox - 4, &value); + if (value != 0x12345678) { + dprintk(0, "Firmware and/or mailbox pointer not initialized or corrupted\n"); + return -1; + } + + memory_read(dev->core, dev->mailbox, &flag); + if (flag) { + dprintk(0, "ERROR: Mailbox appears to be in use (%x)\n", flag); + return -1; + } + + flag |= 1; /* tell 'em we're working on it */ + memory_write(dev->core, dev->mailbox, flag); + + /* write command + args + fill remaining with zeros */ + memory_write(dev->core, dev->mailbox + 1, command); /* command code */ + memory_write(dev->core, dev->mailbox + 3, IVTV_API_STD_TIMEOUT); /* timeout */ + for (i = 0; i < in; i++) { + memory_write(dev->core, dev->mailbox + 4 + i, data[i]); + dprintk(1, "API Input %d = %d\n", i, data[i]); + } + for (; i < CX2341X_MBOX_MAX_DATA; i++) + memory_write(dev->core, dev->mailbox + 4 + i, 0); + + flag |= 3; /* tell 'em we're done writing */ + memory_write(dev->core, dev->mailbox, flag); + + /* wait for firmware to handle the API command */ + timeout = jiffies + msecs_to_jiffies(10); + for (;;) { + memory_read(dev->core, dev->mailbox, &flag); + if (0 != (flag & 4)) + break; + if (time_after(jiffies,timeout)) { + dprintk(0, "ERROR: API Mailbox timeout\n"); + return -1; + } + udelay(10); + } + + /* read output values */ + for (i = 0; i < out; i++) { + memory_read(dev->core, dev->mailbox + 4 + i, data + i); + dprintk(1, "API Output %d = %d\n", i, data[i]); + } + + memory_read(dev->core, dev->mailbox + 2, &retval); + dprintk(1, "API result = %d\n",retval); + + flag = 0; + memory_write(dev->core, dev->mailbox, flag); + return retval; +} +/* ------------------------------------------------------------------ */ + +/* We don't need to call the API often, so using just one mailbox will probably suffice */ +static int blackbird_api_cmd(struct cx8802_dev *dev, u32 command, + u32 inputcnt, u32 outputcnt, ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list vargs; + int i, err; + + va_start(vargs, outputcnt); + + for (i = 0; i < inputcnt; i++) { + data[i] = va_arg(vargs, int); + } + err = blackbird_mbox_func(dev, command, inputcnt, outputcnt, data); + for (i = 0; i < outputcnt; i++) { + int *vptr = va_arg(vargs, int *); + *vptr = data[i]; + } + va_end(vargs); + return err; +} + +static int blackbird_find_mailbox(struct cx8802_dev *dev) +{ + u32 signature[4]={0x12345678, 0x34567812, 0x56781234, 0x78123456}; + int signaturecnt=0; + u32 value; + int i; + + for (i = 0; i < BLACKBIRD_FIRM_IMAGE_SIZE; i++) { + memory_read(dev->core, i, &value); + if (value == signature[signaturecnt]) + signaturecnt++; + else + signaturecnt = 0; + if (4 == signaturecnt) { + dprintk(1, "Mailbox signature found\n"); + return i+1; + } + } + dprintk(0, "Mailbox signature values not found!\n"); + return -1; +} + +static int blackbird_load_firmware(struct cx8802_dev *dev) +{ + static const unsigned char magic[8] = { + 0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa + }; + const struct firmware *firmware; + int i, retval = 0; + u32 value = 0; + u32 checksum = 0; + u32 *dataptr; + + retval = register_write(dev->core, IVTV_REG_VPU, 0xFFFFFFED); + retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); + retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_REFRESH, 0x80000640); + retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); + msleep(1); + retval |= register_write(dev->core, IVTV_REG_APU, 0); + + if (retval < 0) + dprintk(0, "Error with register_write\n"); + + retval = request_firmware(&firmware, CX2341X_FIRM_ENC_FILENAME, + &dev->pci->dev); + + + if (retval != 0) { + dprintk(0, "ERROR: Hotplug firmware request failed (%s).\n", + CX2341X_FIRM_ENC_FILENAME); + dprintk(0, "Please fix your hotplug setup, the board will " + "not work without firmware loaded!\n"); + return -1; + } + + if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) { + dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n", + firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE); + release_firmware(firmware); + return -1; + } + + if (0 != memcmp(firmware->data, magic, 8)) { + dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n"); + release_firmware(firmware); + return -1; + } + + /* transfer to the chip */ + dprintk(1,"Loading firmware ...\n"); + dataptr = (u32*)firmware->data; + for (i = 0; i < (firmware->size >> 2); i++) { + value = le32_to_cpu(*dataptr); + checksum += ~value; + memory_write(dev->core, i, value); + dataptr++; + } + + /* read back to verify with the checksum */ + for (i--; i >= 0; i--) { + memory_read(dev->core, i, &value); + checksum -= ~value; + } + if (checksum) { + dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n"); + release_firmware(firmware); + return -1; + } + release_firmware(firmware); + dprintk(0, "Firmware upload successful.\n"); + + retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); + retval |= register_read(dev->core, IVTV_REG_SPU, &value); + retval |= register_write(dev->core, IVTV_REG_SPU, value & 0xFFFFFFFE); + msleep(1); + + retval |= register_read(dev->core, IVTV_REG_VPU, &value); + retval |= register_write(dev->core, IVTV_REG_VPU, value & 0xFFFFFFE8); + + if (retval < 0) + dprintk(0, "Error with register_write\n"); + return 0; +} + +/** + Settings used by the windows tv app for PVR2000: +================================================================================================================= +Profile | Codec | Resolution | CBR/VBR | Video Qlty | V. Bitrate | Frmrate | Audio Codec | A. Bitrate | A. Mode +----------------------------------------------------------------------------------------------------------------- +MPEG-1 | MPEG1 | 352x288PAL | (CBR) | 1000:Optimal | 2000 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo +MPEG-2 | MPEG2 | 720x576PAL | VBR | 600 :Good | 4000 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo +VCD | MPEG1 | 352x288PAL | (CBR) | 1000:Optimal | 1150 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo +DVD | MPEG2 | 720x576PAL | VBR | 600 :Good | 6000 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo +DB* DVD | MPEG2 | 720x576PAL | CBR | 600 :Good | 6000 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo +================================================================================================================= +*DB: "DirectBurn" +*/ + +static void blackbird_codec_settings(struct cx8802_dev *dev) +{ + /* assign frame size */ + blackbird_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0, + dev->height, dev->width); + + dev->cxhdl.width = dev->width; + dev->cxhdl.height = dev->height; + cx2341x_handler_set_50hz(&dev->cxhdl, dev->core->tvnorm & V4L2_STD_625_50); + cx2341x_handler_setup(&dev->cxhdl); +} + +static int blackbird_initialize_codec(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + int version; + int retval; + + dprintk(1,"Initialize codec\n"); + retval = blackbird_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ + if (retval < 0) { + + dev->mpeg_active = 0; + + /* ping was not successful, reset and upload firmware */ + cx_write(MO_SRST_IO, 0); /* SYS_RSTO=0 */ + cx_write(MO_SRST_IO, 1); /* SYS_RSTO=1 */ + retval = blackbird_load_firmware(dev); + if (retval < 0) + return retval; + + retval = blackbird_find_mailbox(dev); + if (retval < 0) + return -1; + + dev->mailbox = retval; + + retval = blackbird_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ + if (retval < 0) { + dprintk(0, "ERROR: Firmware ping failed!\n"); + return -1; + } + + retval = blackbird_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1, &version); + if (retval < 0) { + dprintk(0, "ERROR: Firmware get encoder version failed!\n"); + return -1; + } + dprintk(0, "Firmware version is 0x%08x\n", version); + } + + cx_write(MO_PINMUX_IO, 0x88); /* 656-8bit IO and enable MPEG parallel IO */ + cx_clear(MO_INPUT_FORMAT, 0x100); /* chroma subcarrier lock to normal? */ + cx_write(MO_VBOS_CONTROL, 0x84A00); /* no 656 mode, 8-bit pixels, disable VBI */ + cx_clear(MO_OUTPUT_FORMAT, 0x0008); /* Normal Y-limits to let the mpeg encoder sync */ + + blackbird_codec_settings(dev); + + blackbird_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0, + BLACKBIRD_FIELD1_SAA7115, + BLACKBIRD_FIELD2_SAA7115 + ); + + blackbird_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0, + BLACKBIRD_CUSTOM_EXTENSION_USR_DATA, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); + + return 0; +} + +static int blackbird_start_codec(struct file *file, void *priv) +{ + struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev; + struct cx88_core *core = dev->core; + /* start capturing to the host interface */ + u32 reg; + + int i; + int lastchange = -1; + int lastval = 0; + + for (i = 0; (i < 10) && (i < (lastchange + 4)); i++) { + reg = cx_read(AUD_STATUS); + + dprintk(1, "AUD_STATUS:%dL: 0x%x\n", i, reg); + if ((reg & 0x0F) != lastval) { + lastval = reg & 0x0F; + lastchange = i; + } + msleep(100); + } + + /* unmute audio source */ + cx_clear(AUD_VOL_CTL, (1 << 6)); + + blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0, 0); + + /* initialize the video input */ + blackbird_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); + + cx2341x_handler_set_busy(&dev->cxhdl, 1); + + /* start capturing to the host interface */ + blackbird_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, + BLACKBIRD_MPEG_CAPTURE, + BLACKBIRD_RAW_BITS_NONE + ); + + dev->mpeg_active = 1; + return 0; +} + +static int blackbird_stop_codec(struct cx8802_dev *dev) +{ + blackbird_api_cmd(dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, + BLACKBIRD_END_NOW, + BLACKBIRD_MPEG_CAPTURE, + BLACKBIRD_RAW_BITS_NONE + ); + + cx2341x_handler_set_busy(&dev->cxhdl, 0); + + dev->mpeg_active = 0; + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int bb_buf_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx8802_fh *fh = q->priv_data; + + fh->dev->ts_packet_size = 188 * 4; /* was: 512 */ + fh->dev->ts_packet_count = mpegbufs; /* was: 100 */ + + *size = fh->dev->ts_packet_size * fh->dev->ts_packet_count; + *count = fh->dev->ts_packet_count; + return 0; +} + +static int +bb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx8802_fh *fh = q->priv_data; + return cx8802_buf_prepare(q, fh->dev, (struct cx88_buffer*)vb, field); +} + +static void +bb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx8802_fh *fh = q->priv_data; + cx8802_buf_queue(fh->dev, (struct cx88_buffer*)vb); +} + +static void +bb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + cx88_free_buffer(q, (struct cx88_buffer*)vb); +} + +static struct videobuf_queue_ops blackbird_qops = { + .buf_setup = bb_buf_setup, + .buf_prepare = bb_buf_prepare, + .buf_queue = bb_buf_queue, + .buf_release = bb_buf_release, +}; + +/* ------------------------------------------------------------------ */ + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev; + struct cx88_core *core = dev->core; + + strcpy(cap->driver, "cx88_blackbird"); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cx88_querycap(file, core, cap); + return 0; +} + +static int vidioc_enum_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index != 0) + return -EINVAL; + + strlcpy(f->description, "MPEG", sizeof(f->description)); + f->pixelformat = V4L2_PIX_FMT_MPEG; + f->flags = V4L2_FMT_FLAG_COMPRESSED; + return 0; +} + +static int vidioc_g_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx8802_fh *fh = priv; + struct cx8802_dev *dev = fh->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = 188 * 4 * mpegbufs; /* 188 * 4 * 1024; */ + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + f->fmt.pix.width = dev->width; + f->fmt.pix.height = dev->height; + f->fmt.pix.field = fh->mpegq.field; + dprintk(1, "VIDIOC_G_FMT: w: %d, h: %d, f: %d\n", + dev->width, dev->height, fh->mpegq.field ); + return 0; +} + +static int vidioc_try_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx8802_fh *fh = priv; + struct cx8802_dev *dev = fh->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = 188 * 4 * mpegbufs; /* 188 * 4 * 1024; */ + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n", + dev->width, dev->height, fh->mpegq.field ); + return 0; +} + +static int vidioc_s_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx8802_fh *fh = priv; + struct cx8802_dev *dev = fh->dev; + struct cx88_core *core = dev->core; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = 188 * 4 * mpegbufs; /* 188 * 4 * 1024; */ + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + dev->width = f->fmt.pix.width; + dev->height = f->fmt.pix.height; + fh->mpegq.field = f->fmt.pix.field; + cx88_set_scale(core, f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field); + blackbird_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0, + f->fmt.pix.height, f->fmt.pix.width); + dprintk(1, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n", + f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field ); + return 0; +} + +static int vidioc_reqbufs (struct file *file, void *priv, struct v4l2_requestbuffers *p) +{ + struct cx8802_fh *fh = priv; + return (videobuf_reqbufs(&fh->mpegq, p)); +} + +static int vidioc_querybuf (struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct cx8802_fh *fh = priv; + return (videobuf_querybuf(&fh->mpegq, p)); +} + +static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct cx8802_fh *fh = priv; + return (videobuf_qbuf(&fh->mpegq, p)); +} + +static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct cx8802_fh *fh = priv; + return (videobuf_dqbuf(&fh->mpegq, p, + file->f_flags & O_NONBLOCK)); +} + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx8802_fh *fh = priv; + struct cx8802_dev *dev = fh->dev; + + if (!dev->mpeg_active) + blackbird_start_codec(file, fh); + return videobuf_streamon(&fh->mpegq); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx8802_fh *fh = priv; + struct cx8802_dev *dev = fh->dev; + + if (dev->mpeg_active) + blackbird_stop_codec(dev); + return videobuf_streamoff(&fh->mpegq); +} + +static int vidioc_s_frequency (struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct cx8802_fh *fh = priv; + struct cx8802_dev *dev = fh->dev; + struct cx88_core *core = dev->core; + + if (unlikely(UNSET == core->board.tuner_type)) + return -EINVAL; + if (unlikely(f->tuner != 0)) + return -EINVAL; + if (dev->mpeg_active) + blackbird_stop_codec(dev); + + cx88_set_freq (core,f); + blackbird_initialize_codec(dev); + cx88_set_scale(dev->core, dev->width, dev->height, + fh->mpegq.field); + return 0; +} + +static int vidioc_log_status (struct file *file, void *priv) +{ + struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev; + struct cx88_core *core = dev->core; + char name[32 + 2]; + + snprintf(name, sizeof(name), "%s/2", core->name); + call_all(core, core, log_status); + v4l2_ctrl_handler_log_status(&dev->cxhdl.hdl, name); + return 0; +} + +static int vidioc_enum_input (struct file *file, void *priv, + struct v4l2_input *i) +{ + struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core; + return cx88_enum_input (core,i); +} + +static int vidioc_g_frequency (struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx8802_fh *fh = priv; + struct cx88_core *core = fh->dev->core; + + if (unlikely(UNSET == core->board.tuner_type)) + return -EINVAL; + if (unlikely(f->tuner != 0)) + return -EINVAL; + + f->frequency = core->freq; + call_all(core, tuner, g_frequency, f); + + return 0; +} + +static int vidioc_g_input (struct file *file, void *priv, unsigned int *i) +{ + struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core; + + *i = core->input; + return 0; +} + +static int vidioc_s_input (struct file *file, void *priv, unsigned int i) +{ + struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core; + + if (i >= 4) + return -EINVAL; + if (0 == INPUT(i).type) + return -EINVAL; + + mutex_lock(&core->lock); + cx88_newstation(core); + cx88_video_mux(core,i); + mutex_unlock(&core->lock); + return 0; +} + +static int vidioc_g_tuner (struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core; + u32 reg; + + if (unlikely(UNSET == core->board.tuner_type)) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + strcpy(t->name, "Television"); + t->capability = V4L2_TUNER_CAP_NORM; + t->rangehigh = 0xffffffffUL; + call_all(core, tuner, g_tuner, t); + + cx88_get_stereo(core ,t); + reg = cx_read(MO_DEVICE_STATUS); + t->signal = (reg & (1<<5)) ? 0xffff : 0x0000; + return 0; +} + +static int vidioc_s_tuner (struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core; + + if (UNSET == core->board.tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + cx88_set_stereo(core, t->audmode, 1); + return 0; +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *tvnorm) +{ + struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core; + + *tvnorm = core->tvnorm; + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) +{ + struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core; + + mutex_lock(&core->lock); + cx88_set_tvnorm(core, id); + mutex_unlock(&core->lock); + return 0; +} + +/* FIXME: cx88_ioctl_hook not implemented */ + +static int mpeg_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct cx8802_dev *dev = video_drvdata(file); + struct cx8802_fh *fh; + struct cx8802_driver *drv = NULL; + int err; + + dprintk( 1, "%s\n", __func__); + + mutex_lock(&dev->core->lock); + + /* Make sure we can acquire the hardware */ + drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD); + if (!drv) { + dprintk(1, "%s: blackbird driver is not loaded\n", __func__); + mutex_unlock(&dev->core->lock); + return -ENODEV; + } + + err = drv->request_acquire(drv); + if (err != 0) { + dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err); + mutex_unlock(&dev->core->lock); + return err; + } + + if (!dev->core->mpeg_users && blackbird_initialize_codec(dev) < 0) { + drv->request_release(drv); + mutex_unlock(&dev->core->lock); + return -EINVAL; + } + dprintk(1, "open dev=%s\n", video_device_node_name(vdev)); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh),GFP_KERNEL); + if (NULL == fh) { + drv->request_release(drv); + mutex_unlock(&dev->core->lock); + return -ENOMEM; + } + v4l2_fh_init(&fh->fh, vdev); + file->private_data = fh; + fh->dev = dev; + + videobuf_queue_sg_init(&fh->mpegq, &blackbird_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx88_buffer), + fh, NULL); + + /* FIXME: locking against other video device */ + cx88_set_scale(dev->core, dev->width, dev->height, + fh->mpegq.field); + + dev->core->mpeg_users++; + mutex_unlock(&dev->core->lock); + v4l2_fh_add(&fh->fh); + return 0; +} + +static int mpeg_release(struct file *file) +{ + struct cx8802_fh *fh = file->private_data; + struct cx8802_dev *dev = fh->dev; + struct cx8802_driver *drv = NULL; + + mutex_lock(&dev->core->lock); + + if (dev->mpeg_active && dev->core->mpeg_users == 1) + blackbird_stop_codec(dev); + + cx8802_cancel_buffers(fh->dev); + /* stop mpeg capture */ + videobuf_stop(&fh->mpegq); + + videobuf_mmap_free(&fh->mpegq); + + v4l2_fh_del(&fh->fh); + v4l2_fh_exit(&fh->fh); + file->private_data = NULL; + kfree(fh); + + /* Make sure we release the hardware */ + drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD); + WARN_ON(!drv); + if (drv) + drv->request_release(drv); + + dev->core->mpeg_users--; + + mutex_unlock(&dev->core->lock); + + return 0; +} + +static ssize_t +mpeg_read(struct file *file, char __user *data, size_t count, loff_t *ppos) +{ + struct cx8802_fh *fh = file->private_data; + struct cx8802_dev *dev = fh->dev; + + if (!dev->mpeg_active) + blackbird_start_codec(file, fh); + + return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0, + file->f_flags & O_NONBLOCK); +} + +static unsigned int +mpeg_poll(struct file *file, struct poll_table_struct *wait) +{ + unsigned long req_events = poll_requested_events(wait); + struct cx8802_fh *fh = file->private_data; + struct cx8802_dev *dev = fh->dev; + + if (!dev->mpeg_active && (req_events & (POLLIN | POLLRDNORM))) + blackbird_start_codec(file, fh); + + return v4l2_ctrl_poll(file, wait) | videobuf_poll_stream(file, &fh->mpegq, wait); +} + +static int +mpeg_mmap(struct file *file, struct vm_area_struct * vma) +{ + struct cx8802_fh *fh = file->private_data; + + return videobuf_mmap_mapper(&fh->mpegq, vma); +} + +static const struct v4l2_file_operations mpeg_fops = +{ + .owner = THIS_MODULE, + .open = mpeg_open, + .release = mpeg_release, + .read = mpeg_read, + .poll = mpeg_poll, + .mmap = mpeg_mmap, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_log_status = vidioc_log_status, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static struct video_device cx8802_mpeg_template = { + .name = "cx8802", + .fops = &mpeg_fops, + .ioctl_ops = &mpeg_ioctl_ops, + .tvnorms = CX88_NORMS, +}; + +/* ------------------------------------------------------------------ */ + +/* The CX8802 MPEG API will call this when we can use the hardware */ +static int cx8802_blackbird_advise_acquire(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* By default, core setup will leave the cx22702 out of reset, on the bus. + * We left the hardware on power up with the cx22702 active. + * We're being given access to re-arrange the GPIOs. + * Take the bus off the cx22702 and put the cx23416 on it. + */ + /* Toggle reset on cx22702 leaving i2c active */ + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + /* tri-state the cx22702 pins */ + cx_set(MO_GP0_IO, 0x00000004); + udelay(1000); + break; + default: + err = -ENODEV; + } + return err; +} + +/* The CX8802 MPEG API will call this when we need to release the hardware */ +static int cx8802_blackbird_advise_release(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* Exit leaving the cx23416 on the bus */ + break; + default: + err = -ENODEV; + } + return err; +} + +static void blackbird_unregister_video(struct cx8802_dev *dev) +{ + if (dev->mpeg_dev) { + if (video_is_registered(dev->mpeg_dev)) + video_unregister_device(dev->mpeg_dev); + else + video_device_release(dev->mpeg_dev); + dev->mpeg_dev = NULL; + } +} + +static int blackbird_register_video(struct cx8802_dev *dev) +{ + int err; + + dev->mpeg_dev = cx88_vdev_init(dev->core,dev->pci, + &cx8802_mpeg_template,"mpeg"); + dev->mpeg_dev->ctrl_handler = &dev->cxhdl.hdl; + video_set_drvdata(dev->mpeg_dev, dev); + err = video_register_device(dev->mpeg_dev,VFL_TYPE_GRABBER, -1); + if (err < 0) { + printk(KERN_INFO "%s/2: can't register mpeg device\n", + dev->core->name); + return err; + } + printk(KERN_INFO "%s/2: registered device %s [mpeg]\n", + dev->core->name, video_device_node_name(dev->mpeg_dev)); + return 0; +} + +/* ----------------------------------------------------------- */ + +static int cx8802_blackbird_probe(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + struct cx8802_dev *dev = core->dvbdev; + int err; + + dprintk( 1, "%s\n", __func__); + dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", + core->boardnr, + core->name, + core->pci_bus, + core->pci_slot); + + err = -ENODEV; + if (!(core->board.mpeg & CX88_MPEG_BLACKBIRD)) + goto fail_core; + + dev->width = 720; + if (core->tvnorm & V4L2_STD_525_60) { + dev->height = 480; + } else { + dev->height = 576; + } + dev->cxhdl.port = CX2341X_PORT_STREAMING; + dev->cxhdl.width = dev->width; + dev->cxhdl.height = dev->height; + dev->cxhdl.func = blackbird_mbox_func; + dev->cxhdl.priv = dev; + err = cx2341x_handler_init(&dev->cxhdl, 36); + if (err) + goto fail_core; + v4l2_ctrl_add_handler(&dev->cxhdl.hdl, &core->video_hdl, NULL); + + /* blackbird stuff */ + printk("%s/2: cx23416 based mpeg encoder (blackbird reference design)\n", + core->name); + host_setup(dev->core); + + blackbird_initialize_codec(dev); + + /* initial device configuration: needed ? */ +// init_controls(core); + cx88_set_tvnorm(core,core->tvnorm); + cx88_video_mux(core,0); + cx2341x_handler_set_50hz(&dev->cxhdl, dev->height == 576); + cx2341x_handler_setup(&dev->cxhdl); + blackbird_register_video(dev); + + return 0; + + fail_core: + return err; +} + +static int cx8802_blackbird_remove(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + struct cx8802_dev *dev = core->dvbdev; + + /* blackbird */ + blackbird_unregister_video(drv->core->dvbdev); + v4l2_ctrl_handler_free(&dev->cxhdl.hdl); + + return 0; +} + +static struct cx8802_driver cx8802_blackbird_driver = { + .type_id = CX88_MPEG_BLACKBIRD, + .hw_access = CX8802_DRVCTL_SHARED, + .probe = cx8802_blackbird_probe, + .remove = cx8802_blackbird_remove, + .advise_acquire = cx8802_blackbird_advise_acquire, + .advise_release = cx8802_blackbird_advise_release, +}; + +static int __init blackbird_init(void) +{ + printk(KERN_INFO "cx2388x blackbird driver version %s loaded\n", + CX88_VERSION); + return cx8802_register_driver(&cx8802_blackbird_driver); +} + +static void __exit blackbird_fini(void) +{ + cx8802_unregister_driver(&cx8802_blackbird_driver); +} + +module_init(blackbird_init); +module_exit(blackbird_fini); + +module_param_named(video_debug,cx8802_mpeg_template.debug, int, 0644); +MODULE_PARM_DESC(debug,"enable debug messages [video]"); diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c new file mode 100644 index 00000000..a87a0e19 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-cards.c @@ -0,0 +1,3815 @@ +/* + * + * device driver for Conexant 2388x based TV cards + * card-specific stuff. + * + * (c) 2003 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "cx88.h" +#include "tea5767.h" +#include "xc4000.h" + +static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; +static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; +static unsigned int card[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; + +module_param_array(tuner, int, NULL, 0444); +module_param_array(radio, int, NULL, 0444); +module_param_array(card, int, NULL, 0444); + +MODULE_PARM_DESC(tuner,"tuner type"); +MODULE_PARM_DESC(radio,"radio tuner type"); +MODULE_PARM_DESC(card,"card type"); + +static unsigned int latency = UNSET; +module_param(latency,int,0444); +MODULE_PARM_DESC(latency,"pci latency timer"); + +static int disable_ir; +module_param(disable_ir, int, 0444); +MODULE_PARM_DESC(disable_ir, "Disable IR support"); + +#define info_printk(core, fmt, arg...) \ + printk(KERN_INFO "%s: " fmt, core->name , ## arg) + +#define warn_printk(core, fmt, arg...) \ + printk(KERN_WARNING "%s: " fmt, core->name , ## arg) + +#define err_printk(core, fmt, arg...) \ + printk(KERN_ERR "%s: " fmt, core->name , ## arg) + +#define dprintk(level,fmt, arg...) do { \ + if (cx88_core_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, core->name , ## arg); \ + } while(0) + + +/* ------------------------------------------------------------------ */ +/* board config info */ + +/* If radio_type !=UNSET, radio_addr should be specified + */ + +static const struct cx88_board cx88_boards[] = { + [CX88_BOARD_UNKNOWN] = { + .name = "UNKNOWN/GENERIC", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 0, + },{ + .type = CX88_VMUX_COMPOSITE2, + .vmux = 1, + },{ + .type = CX88_VMUX_COMPOSITE3, + .vmux = 2, + },{ + .type = CX88_VMUX_COMPOSITE4, + .vmux = 3, + }}, + }, + [CX88_BOARD_HAUPPAUGE] = { + .name = "Hauppauge WinTV 34xxx models", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xff00, // internal decoder + },{ + .type = CX88_VMUX_DEBUG, + .vmux = 0, + .gpio0 = 0xff01, // mono from tuner chip + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xff02, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xff02, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xff01, + }, + }, + [CX88_BOARD_GDI] = { + .name = "GDI Black Gold", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + }}, + }, + [CX88_BOARD_PIXELVIEW] = { + .name = "PixelView", + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xff00, // internal decoder + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xff10, + }, + }, + [CX88_BOARD_ATI_WONDER_PRO] = { + .name = "ATI TV Wonder Pro", + .tuner_type = TUNER_PHILIPS_4IN1, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x03ff, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x03fe, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x03fe, + }}, + }, + [CX88_BOARD_WINFAST2000XP_EXPERT] = { + .name = "Leadtek Winfast 2000XP Expert", + .tuner_type = TUNER_PHILIPS_4IN1, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00F5e700, + .gpio1 = 0x00003004, + .gpio2 = 0x00F5e700, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00F5c700, + .gpio1 = 0x00003004, + .gpio2 = 0x00F5c700, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00F5c700, + .gpio1 = 0x00003004, + .gpio2 = 0x00F5c700, + .gpio3 = 0x02000000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x00F5d700, + .gpio1 = 0x00003004, + .gpio2 = 0x00F5d700, + .gpio3 = 0x02000000, + }, + }, + [CX88_BOARD_AVERTV_STUDIO_303] = { + .name = "AverTV Studio 303 (M126)", + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio1 = 0xe09f, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio1 = 0xe05f, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio1 = 0xe05f, + }}, + .radio = { + .gpio1 = 0xe0df, + .type = CX88_RADIO, + }, + }, + [CX88_BOARD_MSI_TVANYWHERE_MASTER] = { + // added gpio values thanks to Michal + // values for PAL from DScaler + .name = "MSI TV-@nywhere Master", + .tuner_type = TUNER_MT2032, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER_NTSC, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x000040bf, + .gpio1 = 0x000080c0, + .gpio2 = 0x0000ff40, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000040bf, + .gpio1 = 0x000080c0, + .gpio2 = 0x0000ff40, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000040bf, + .gpio1 = 0x000080c0, + .gpio2 = 0x0000ff40, + }}, + .radio = { + .type = CX88_RADIO, + .vmux = 3, + .gpio0 = 0x000040bf, + .gpio1 = 0x000080c0, + .gpio2 = 0x0000ff20, + }, + }, + [CX88_BOARD_WINFAST_DV2000] = { + .name = "Leadtek Winfast DV2000", + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0035e700, + .gpio1 = 0x00003004, + .gpio2 = 0x0035e700, + .gpio3 = 0x02000000, + },{ + + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0035c700, + .gpio1 = 0x00003004, + .gpio2 = 0x0035c700, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0035c700, + .gpio1 = 0x0035c700, + .gpio2 = 0x02000000, + .gpio3 = 0x02000000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0035d700, + .gpio1 = 0x00007004, + .gpio2 = 0x0035d700, + .gpio3 = 0x02000000, + }, + }, + [CX88_BOARD_LEADTEK_PVR2000] = { + // gpio values for PAL version from regspy by DScaler + .name = "Leadtek PVR 2000", + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0000bde2, + .audioroute = 1, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0000bde6, + .audioroute = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0000bde6, + .audioroute = 1, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0000bd62, + .audioroute = 1, + }, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_IODATA_GVVCP3PCI] = { + .name = "IODATA GV-VCP3/PCI", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 0, + },{ + .type = CX88_VMUX_COMPOSITE2, + .vmux = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + }}, + }, + [CX88_BOARD_PROLINK_PLAYTVPVR] = { + .name = "Prolink PlayTV PVR", + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xbff0, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xbff3, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xbff3, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xbff0, + }, + }, + [CX88_BOARD_ASUS_PVR_416] = { + .name = "ASUS PVR-416", + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0000fde6, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0000fde6, // 0x0000fda6 L,R RCA audio in? + .audioroute = 1, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0000fde2, + }, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_MSI_TVANYWHERE] = { + .name = "MSI TV-@nywhere", + .tuner_type = TUNER_MT2032, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00000fbf, + .gpio2 = 0x0000fc08, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00000fbf, + .gpio2 = 0x0000fc68, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00000fbf, + .gpio2 = 0x0000fc68, + }}, + }, + [CX88_BOARD_KWORLD_DVB_T] = { + .name = "KWorld/VStream XPert DVB-T", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0700, + .gpio2 = 0x0101, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0700, + .gpio2 = 0x0101, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1] = { + .name = "DViCO FusionHDTV DVB-T1", + .tuner_type = TUNER_ABSENT, /* No analog tuner */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000027df, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000027df, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_KWORLD_LTV883] = { + .name = "KWorld LTV883RF", + .tuner_type = TUNER_TNF_8831BGFF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x07f8, + },{ + .type = CX88_VMUX_DEBUG, + .vmux = 0, + .gpio0 = 0x07f9, // mono from tuner chip + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000007fa, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000007fa, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x000007f8, + }, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = { + .name = "DViCO FusionHDTV 3 Gold-Q", + .tuner_type = TUNER_MICROTUNE_4042FI5, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + /* + GPIO[0] resets DT3302 DTV receiver + 0 - reset asserted + 1 - normal operation + GPIO[1] mutes analog audio output connector + 0 - enable selected source + 1 - mute + GPIO[2] selects source for analog audio output connector + 0 - analog audio input connector on tab + 1 - analog DAC output from CX23881 chip + GPIO[3] selects RF input connector on tuner module + 0 - RF connector labeled CABLE + 1 - RF connector labeled ANT + GPIO[4] selects high RF for QAM256 mode + 0 - normal RF + 1 - high RF + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0f0d, + },{ + .type = CX88_VMUX_CABLE, + .vmux = 0, + .gpio0 = 0x0f05, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0f00, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0f00, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_DVB_T1] = { + .name = "Hauppauge Nova-T DVB-T", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_CONEXANT_DVB_T1] = { + .name = "Conexant DVB-T reference design", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PROVIDEO_PV259] = { + .name = "Provideo PV259", + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .audioroute = 1, + }}, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS] = { + .name = "DViCO FusionHDTV DVB-T Plus", + .tuner_type = TUNER_ABSENT, /* No analog tuner */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000027df, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000027df, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DNTV_LIVE_DVB_T] = { + .name = "digitalnow DNTV Live! DVB-T", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00000700, + .gpio2 = 0x00000101, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00000700, + .gpio2 = 0x00000101, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PCHDTV_HD3000] = { + .name = "pcHDTV HD3000 HDTV", + .tuner_type = TUNER_THOMSON_DTT761X, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + /* GPIO[2] = audio source for analog audio out connector + * 0 = analog audio input connector + * 1 = CX88 audio DACs + * + * GPIO[7] = input to CX88's audio/chroma ADC + * 0 = FM 10.7 MHz IF + * 1 = Sound 4.5 MHz IF + * + * GPIO[1,5,6] = Oren 51132 pins 27,35,28 respectively + * + * GPIO[16] = Remote control input + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00008484, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00008400, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00008400, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x00008404, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_ROSLYN] = { + // entry added by Kaustubh D. Bhalerao + // GPIO values obtained from regspy, courtesy Sean Covel + .name = "Hauppauge WinTV 28xxx (Roslyn) models", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xed1a, + .gpio2 = 0x00ff, + },{ + .type = CX88_VMUX_DEBUG, + .vmux = 0, + .gpio0 = 0xff01, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xff02, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xed92, + .gpio2 = 0x00ff, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xed96, + .gpio2 = 0x00ff, + }, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_DIGITALLOGIC_MEC] = { + .name = "Digital-Logic MICROSPACE Entertainment Center (MEC)", + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00009d80, + .audioroute = 1, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00009d76, + .audioroute = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00009d76, + .audioroute = 1, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x00009d00, + .audioroute = 1, + }, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_IODATA_GVBCTV7E] = { + .name = "IODATA GV/BCTV7E", + .tuner_type = TUNER_PHILIPS_FQ1286, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 1, + .gpio1 = 0x0000e03f, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 2, + .gpio1 = 0x0000e07f, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 3, + .gpio1 = 0x0000e07f, + }} + }, + [CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO] = { + .name = "PixelView PlayTV Ultra Pro (Stereo)", + /* May be also TUNER_YMEC_TVF_5533MF for NTSC/M or PAL/M */ + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + /* Some variants use a tda9874 and so need the tvaudio module. */ + .audio_chip = V4L2_IDENT_TVAUDIO, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xbf61, /* internal decoder */ + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xbf63, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xbf63, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xbf60, + }, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T] = { + .name = "DViCO FusionHDTV 3 Gold-T", + .tuner_type = TUNER_THOMSON_DTT761X, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x97ed, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x97e9, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x97e9, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_ADSTECH_DVB_T_PCI] = { + .name = "ADS Tech Instant TV DVB-T PCI", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0700, + .gpio2 = 0x0101, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0700, + .gpio2 = 0x0101, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1] = { + .name = "TerraTec Cinergy 1400 DVB-T", + .tuner_type = TUNER_ABSENT, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 2, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD] = { + .name = "DViCO FusionHDTV 5 Gold", + .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H062F */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x87fd, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x87f9, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x87f9, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_AVERMEDIA_ULTRATV_MC_550] = { + .name = "AverMedia UltraTV Media Center PCI 550", + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 0, + .gpio0 = 0x0000cd73, + .audioroute = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 1, + .gpio0 = 0x0000cd73, + .audioroute = 1, + },{ + .type = CX88_VMUX_TELEVISION, + .vmux = 3, + .gpio0 = 0x0000cdb3, + .audioroute = 1, + }}, + .radio = { + .type = CX88_RADIO, + .vmux = 2, + .gpio0 = 0x0000cdf3, + .audioroute = 1, + }, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD] = { + /* Alexander Wold */ + .name = "Kworld V-Stream Xpert DVD", + .tuner_type = UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x03000000, + .gpio1 = 0x01000000, + .gpio2 = 0x02000000, + .gpio3 = 0x00100000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x03000000, + .gpio1 = 0x01000000, + .gpio2 = 0x02000000, + .gpio3 = 0x00100000, + }}, + }, + [CX88_BOARD_ATI_HDTVWONDER] = { + .name = "ATI HDTV Wonder", + .tuner_type = TUNER_PHILIPS_TUV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00000ff7, + .gpio1 = 0x000000ff, + .gpio2 = 0x00000001, + .gpio3 = 0x00000000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00000ffe, + .gpio1 = 0x000000ff, + .gpio2 = 0x00000001, + .gpio3 = 0x00000000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00000ffe, + .gpio1 = 0x000000ff, + .gpio2 = 0x00000001, + .gpio3 = 0x00000000, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_WINFAST_DTV1000] = { + .name = "WinFast DTV1000-T", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_AVERTV_303] = { + .name = "AVerTV 303 (M126)", + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00ff, + .gpio1 = 0xe09f, + .gpio2 = 0x0010, + .gpio3 = 0x0000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00ff, + .gpio1 = 0xe05f, + .gpio2 = 0x0010, + .gpio3 = 0x0000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00ff, + .gpio1 = 0xe05f, + .gpio2 = 0x0010, + .gpio3 = 0x0000, + }}, + }, + [CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1] = { + .name = "Hauppauge Nova-S-Plus DVB-S", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_chip = V4L2_IDENT_WM8775, + .i2sinputcntl = 2, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + /* 2: Line-In */ + .audioroute = 2, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + /* 2: Line-In */ + .audioroute = 2, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + /* 2: Line-In */ + .audioroute = 2, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_NOVASE2_S1] = { + .name = "Hauppauge Nova-SE2 DVB-S", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_KWORLD_DVBS_100] = { + .name = "KWorld DVB-S 100", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_chip = V4L2_IDENT_WM8775, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + /* 2: Line-In */ + .audioroute = 2, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + /* 2: Line-In */ + .audioroute = 2, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + /* 2: Line-In */ + .audioroute = 2, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_HVR1100] = { + .name = "Hauppauge WinTV-HVR1100 DVB-T/Hybrid", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + }}, + /* fixme: Add radio support */ + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_HVR1100LP] = { + .name = "Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + }}, + /* fixme: Add radio support */ + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DNTV_LIVE_DVB_T_PRO] = { + .name = "digitalnow DNTV Live! DVB-T Pro", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | + TDA9887_PORT2_ACTIVE, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xf80808, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xf80808, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xf80808, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xf80808, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_KWORLD_DVB_T_CX22702] = { + /* Kworld V-stream Xpert DVB-T with Thomson tuner */ + /* DTT 7579 Conexant CX22702-19 Conexant CX2388x */ + /* Manenti Marco */ + .name = "KWorld/VStream XPert DVB-T with cx22702", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0700, + .gpio2 = 0x0101, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0700, + .gpio2 = 0x0101, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL] = { + .name = "DViCO FusionHDTV DVB-T Dual Digital", + .tuner_type = TUNER_ABSENT, /* No analog tuner */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000067df, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000067df, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT] = { + .name = "KWorld HardwareMpegTV XPert", + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x3de2, + .gpio2 = 0x00ff, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x3de6, + .audioroute = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x3de6, + .audioroute = 1, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x3de6, + .gpio2 = 0x00ff, + }, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID] = { + .name = "DViCO FusionHDTV DVB-T Hybrid", + .tuner_type = TUNER_THOMSON_FE6600, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0000a75f, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0000a75b, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0000a75b, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PCHDTV_HD5500] = { + .name = "pcHDTV HD5500 HDTV", + .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x87fd, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x87f9, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x87f9, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_KWORLD_MCE200_DELUXE] = { + /* FIXME: tested TV input only, disabled composite, + svideo and radio until they can be tested also. */ + .name = "Kworld MCE 200 Deluxe", + .tuner_type = TUNER_TENA_9533_DI, + .radio_type = UNSET, + .tda9887_conf = TDA9887_PRESENT, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0000BDE6 + }}, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_PIXELVIEW_PLAYTV_P7000] = { + /* FIXME: SVideo, Composite and FM inputs are untested */ + .name = "PixelView PlayTV P7000", + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | + TDA9887_PORT2_ACTIVE, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x5da6, + }}, + .mpeg = CX88_MPEG_BLACKBIRD, + }, + [CX88_BOARD_NPGTECH_REALTV_TOP10FM] = { + .name = "NPG Tech Real TV FM Top 10", + .tuner_type = TUNER_TNF_5335MF, /* Actually a TNF9535 */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0788, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x078b, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x078b, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x074a, + }, + }, + [CX88_BOARD_WINFAST_DTV2000H] = { + .name = "WinFast DTV2000 H", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00017304, + .gpio1 = 0x00008203, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0001d701, + .gpio1 = 0x0000b207, + .gpio2 = 0x0001d701, + .gpio3 = 0x02000000, + }, { + .type = CX88_VMUX_COMPOSITE2, + .vmux = 2, + .gpio0 = 0x0001d503, + .gpio1 = 0x0000b207, + .gpio2 = 0x0001d503, + .gpio3 = 0x02000000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 3, + .gpio0 = 0x0001d701, + .gpio1 = 0x0000b207, + .gpio2 = 0x0001d701, + .gpio3 = 0x02000000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x00015702, + .gpio1 = 0x0000f207, + .gpio2 = 0x00015702, + .gpio3 = 0x02000000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_WINFAST_DTV2000H_J] = { + .name = "WinFast DTV2000 H rev. J", + .tuner_type = TUNER_PHILIPS_FMD1216MEX_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00017300, + .gpio1 = 0x00008207, + .gpio2 = 0x00000000, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00018300, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00018301, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00018301, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x00015702, + .gpio1 = 0x0000f207, + .gpio2 = 0x00015702, + .gpio3 = 0x02000000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_GENIATECH_DVBS] = { + .name = "Geniatech DVB-S", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_HVR3000] = { + .name = "Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .audio_chip = V4L2_IDENT_WM8775, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x84bf, + /* 1: TV Audio / FM Mono */ + .audioroute = 1, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x84bf, + /* 2: Line-In */ + .audioroute = 2, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x84bf, + /* 2: Line-In */ + .audioroute = 2, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x84bf, + /* 4: FM Stereo (untested) */ + .audioroute = 8, + }, + .mpeg = CX88_MPEG_DVB, + .num_frontends = 2, + }, + [CX88_BOARD_NORWOOD_MICRO] = { + .name = "Norwood Micro TV Tuner", + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0709, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x070b, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x070b, + }}, + }, + [CX88_BOARD_TE_DTV_250_OEM_SWANN] = { + .name = "Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM", + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x003fffff, + .gpio1 = 0x00e00000, + .gpio2 = 0x003fffff, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x003fffff, + .gpio1 = 0x00e00000, + .gpio2 = 0x003fffff, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x003fffff, + .gpio1 = 0x00e00000, + .gpio2 = 0x003fffff, + .gpio3 = 0x02000000, + }}, + }, + [CX88_BOARD_HAUPPAUGE_HVR1300] = { + .name = "Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .audio_chip = V4L2_IDENT_WM8775, + /* + * gpio0 as reported by Mike Crash + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xef88, + /* 1: TV Audio / FM Mono */ + .audioroute = 1, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xef88, + /* 2: Line-In */ + .audioroute = 2, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xef88, + /* 2: Line-In */ + .audioroute = 2, + }}, + .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xef88, + /* 4: FM Stereo (untested) */ + .audioroute = 8, + }, + }, + [CX88_BOARD_SAMSUNG_SMT_7020] = { + .name = "Samsung SMT 7020 DVB-S", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_ADSTECH_PTV_390] = { + .name = "ADS Tech Instant Video PCI", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DEBUG, + .vmux = 3, + .gpio0 = 0x04ff, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x07fa, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x07fa, + }}, + }, + [CX88_BOARD_PINNACLE_PCTV_HD_800i] = { + .name = "Pinnacle PCTV HD 800i", + .tuner_type = TUNER_XC5000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x04fb, + .gpio1 = 0x10ff, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x04fb, + .gpio1 = 0x10ef, + .audioroute = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x04fb, + .gpio1 = 0x10ef, + .audioroute = 1, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO] = { + .name = "DViCO FusionHDTV 5 PCI nano", + /* xc3008 tuner, digital only for now */ + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x000027df, /* Unconfirmed */ + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000027df, /* Unconfirmed */ + .audioroute = 1, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000027df, /* Unconfirmed */ + .audioroute = 1, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PINNACLE_HYBRID_PCTV] = { + .name = "Pinnacle Hybrid PCTV", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x004ff, + .gpio1 = 0x010ff, + .gpio2 = 0x00001, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x004fb, + .gpio1 = 0x010ef, + .audioroute = 1, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x004fb, + .gpio1 = 0x010ef, + .audioroute = 1, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x004ff, + .gpio1 = 0x010ff, + .gpio2 = 0x0ff, + }, + .mpeg = CX88_MPEG_DVB, + }, + /* Terry Wu */ + /* TV Audio : set GPIO 2, 18, 19 value to 0, 1, 0 */ + /* FM Audio : set GPIO 2, 18, 19 value to 0, 0, 0 */ + /* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */ + /* Mute Audio : set GPIO 2 value to 1 */ + [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = { + .name = "Leadtek TV2000 XP Global", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C04, /* pin 18 = 1, pin 19 = 0 */ + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C00, /* pin 18 = 0, pin 19 = 0 */ + .gpio3 = 0x0000, + }, + }, + [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36] = { + .name = "Leadtek TV2000 XP Global (SC4100)", + .tuner_type = TUNER_XC4000, + .tuner_addr = 0x61, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C04, /* pin 18 = 1, pin 19 = 0 */ + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C00, /* pin 18 = 0, pin 19 = 0 */ + .gpio3 = 0x0000, + }, + }, + [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43] = { + .name = "Leadtek TV2000 XP Global (XC4100)", + .tuner_type = TUNER_XC4000, + .tuner_addr = 0x61, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6040, /* pin 14 = 1, pin 13 = 0 */ + .gpio2 = 0x0000, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 14 = 1, pin 13 = 1 */ + .gpio2 = 0x0000, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 14 = 1, pin 13 = 1 */ + .gpio2 = 0x0000, + .gpio3 = 0x0000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6000, /* pin 14 = 1, pin 13 = 0 */ + .gpio2 = 0x0000, + .gpio3 = 0x0000, + }, + }, + [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { + .name = "PowerColor RA330", /* Long names may confuse LIRC. */ + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_DEBUG, + .vmux = 3, /* Due to the way the cx88 driver is written, */ + .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */ + .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */ + .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */ + }, { /* from the tuner on boot for a little while. */ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00ff, + .gpio1 = 0xf35d, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00ff, + .gpio1 = 0xf37d, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000ff, + .gpio1 = 0x0f37d, + .gpio3 = 0x00000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x000ff, + .gpio1 = 0x0f35d, + .gpio3 = 0x00000, + }, + }, + [CX88_BOARD_GENIATECH_X8000_MT] = { + /* Also PowerColor Real Angel 330 and Geniatech X800 OEM */ + .name = "Geniatech X8000-MT DVBT", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00000000, + .gpio1 = 0x00e3e341, + .gpio2 = 0x00000000, + .gpio3 = 0x00000000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00000000, + .gpio1 = 0x00e3e361, + .gpio2 = 0x00000000, + .gpio3 = 0x00000000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00000000, + .gpio1 = 0x00e3e361, + .gpio2 = 0x00000000, + .gpio3 = 0x00000000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x00000000, + .gpio1 = 0x00e3e341, + .gpio2 = 0x00000000, + .gpio3 = 0x00000000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO] = { + .name = "DViCO FusionHDTV DVB-T PRO", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000067df, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000067df, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD] = { + .name = "DViCO FusionHDTV 7 Gold", + .tuner_type = TUNER_XC5000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x10df, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x16d9, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x16d9, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PROLINK_PV_8000GT] = { + .name = "Prolink Pixelview MPEG 8000GT", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0ff, + .gpio2 = 0x0cfb, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio2 = 0x0cfb, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio2 = 0x0cfb, + } }, + .radio = { + .type = CX88_RADIO, + .gpio2 = 0x0cfb, + }, + }, + [CX88_BOARD_PROLINK_PV_GLOBAL_XTREME] = { + .name = "Prolink Pixelview Global Extreme", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cf7, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cfb, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cfb, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x04ff, + .gpio1 = 0x04080, + .gpio2 = 0x0cf7, + }, + }, + /* Both radio, analog and ATSC work with this board. + However, for analog to work, s5h1409 gate should be open, + otherwise, tuner-xc3028 won't be detected. + A proper fix require using the newer i2c methods to add + tuner-xc3028 without doing an i2c probe. + */ + [CX88_BOARD_KWORLD_ATSC_120] = { + .name = "Kworld PlusTV HD PCI 120 (ATSC 120)", + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x000000ff, + .gpio1 = 0x0000f35d, + .gpio2 = 0x00000000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000000ff, + .gpio1 = 0x0000f37e, + .gpio2 = 0x00000000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000000ff, + .gpio1 = 0x0000f37e, + .gpio2 = 0x00000000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x000000ff, + .gpio1 = 0x0000f35d, + .gpio2 = 0x00000000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_HVR4000] = { + .name = "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .audio_chip = V4L2_IDENT_WM8775, + /* + * GPIO0 (WINTV2000) + * + * Analogue SAT DVB-T + * Antenna 0xc4bf 0xc4bb + * Composite 0xc4bf 0xc4bb + * S-Video 0xc4bf 0xc4bb + * Composite1 0xc4ff 0xc4fb + * S-Video1 0xc4ff 0xc4fb + * + * BIT VALUE FUNCTION GP{x}_IO + * 0 1 I:? + * 1 1 I:? + * 2 1 O:MPEG PORT 0=DVB-T 1=DVB-S + * 3 1 I:? + * 4 1 I:? + * 5 1 I:? + * 6 0 O:INPUT SELECTOR 0=INTERNAL 1=EXPANSION + * 7 1 O:DVB-T DEMOD RESET LOW + * + * BIT VALUE FUNCTION GP{x}_OE + * 8 0 I + * 9 0 I + * a 1 O + * b 0 I + * c 0 I + * d 0 I + * e 1 O + * f 1 O + * + * WM8775 ADC + * + * 1: TV Audio / FM Mono + * 2: Line-In + * 3: Line-In Expansion + * 4: FM Stereo + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xc4bf, + /* 1: TV Audio / FM Mono */ + .audioroute = 1, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xc4bf, + /* 2: Line-In */ + .audioroute = 2, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xc4bf, + /* 2: Line-In */ + .audioroute = 2, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xc4bf, + /* 4: FM Stereo */ + .audioroute = 8, + }, + .mpeg = CX88_MPEG_DVB, + .num_frontends = 2, + }, + [CX88_BOARD_HAUPPAUGE_HVR4000LITE] = { + .name = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TEVII_S420] = { + .name = "TeVii S420 DVB-S", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TEVII_S460] = { + .name = "TeVii S460 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TEVII_S464] = { + .name = "TeVii S464 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_OMICOM_SS4_PCI] = { + .name = "Omicom SS4 DVB-S/S2 PCI", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TBS_8910] = { + .name = "TBS 8910 DVB-S", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TBS_8920] = { + .name = "TBS 8920 DVB-S/S2", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + .gpio0 = 0x8080, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PROF_6200] = { + .name = "Prof 6200 DVB-S", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PROF_7300] = { + .name = "PROF 7300 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_SATTRADE_ST4200] = { + .name = "SATTRADE ST4200 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII] = { + .name = "Terratec Cinergy HT PCI MKII", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x004ff, + .gpio1 = 0x010ff, + .gpio2 = 0x00001, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x004fb, + .gpio1 = 0x010ef, + .audioroute = 1, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x004fb, + .gpio1 = 0x010ef, + .audioroute = 1, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x004ff, + .gpio1 = 0x010ff, + .gpio2 = 0x0ff, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_IRONLY] = { + .name = "Hauppauge WinTV-IR Only", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [CX88_BOARD_WINFAST_DTV1800H] = { + .name = "Leadtek WinFast DTV1800 Hybrid", + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + /* + * GPIO setting + * + * 2: mute (0=off,1=on) + * 12: tuner reset pin + * 13: audio source (0=tuner audio,1=line in) + * 14: FM (0=on,1=off ???) + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6040, /* pin 13 = 0, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6000, /* pin 13 = 0, pin 14 = 0 */ + .gpio2 = 0x0000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_WINFAST_DTV1800H_XC4000] = { + .name = "Leadtek WinFast DTV1800 H (XC4000)", + .tuner_type = TUNER_XC4000, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + /* + * GPIO setting + * + * 2: mute (0=off,1=on) + * 12: tuner reset pin + * 13: audio source (0=tuner audio,1=line in) + * 14: FM (0=on,1=off ???) + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6040, /* pin 13 = 0, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6000, /* pin 13 = 0, pin 14 = 0 */ + .gpio2 = 0x0000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_WINFAST_DTV2000H_PLUS] = { + .name = "Leadtek WinFast DTV2000 H PLUS", + .tuner_type = TUNER_XC4000, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + /* + * GPIO + * 2: 1: mute audio + * 12: 0: reset XC4000 + * 13: 1: audio input is line in (0: tuner) + * 14: 0: FM radio + * 16: 0: RF input is cable + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0403, + .gpio1 = 0xF0D7, + .gpio2 = 0x0101, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_CABLE, + .vmux = 0, + .gpio0 = 0x0403, + .gpio1 = 0xF0D7, + .gpio2 = 0x0100, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0403, /* was 0x0407 */ + .gpio1 = 0xF0F7, + .gpio2 = 0x0101, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0403, /* was 0x0407 */ + .gpio1 = 0xF0F7, + .gpio2 = 0x0101, + .gpio3 = 0x0000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0403, + .gpio1 = 0xF097, + .gpio2 = 0x0100, + .gpio3 = 0x0000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PROF_7301] = { + .name = "Prof 7301 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TWINHAN_VP1027_DVBS] = { + .name = "Twinhan VP-1027 DVB-S", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, +}; + +/* ------------------------------------------------------------------ */ +/* PCI subsystem IDs */ + +static const struct cx88_subid cx88_subids[] = { + { + .subvendor = 0x0070, + .subdevice = 0x3400, + .card = CX88_BOARD_HAUPPAUGE, + },{ + .subvendor = 0x0070, + .subdevice = 0x3401, + .card = CX88_BOARD_HAUPPAUGE, + },{ + .subvendor = 0x14c7, + .subdevice = 0x0106, + .card = CX88_BOARD_GDI, + },{ + .subvendor = 0x14c7, + .subdevice = 0x0107, /* with mpeg encoder */ + .card = CX88_BOARD_GDI, + },{ + .subvendor = PCI_VENDOR_ID_ATI, + .subdevice = 0x00f8, + .card = CX88_BOARD_ATI_WONDER_PRO, + }, { + .subvendor = PCI_VENDOR_ID_ATI, + .subdevice = 0x00f9, + .card = CX88_BOARD_ATI_WONDER_PRO, + }, { + .subvendor = 0x107d, + .subdevice = 0x6611, + .card = CX88_BOARD_WINFAST2000XP_EXPERT, + },{ + .subvendor = 0x107d, + .subdevice = 0x6613, /* NTSC */ + .card = CX88_BOARD_WINFAST2000XP_EXPERT, + },{ + .subvendor = 0x107d, + .subdevice = 0x6620, + .card = CX88_BOARD_WINFAST_DV2000, + },{ + .subvendor = 0x107d, + .subdevice = 0x663b, + .card = CX88_BOARD_LEADTEK_PVR2000, + },{ + .subvendor = 0x107d, + .subdevice = 0x663c, + .card = CX88_BOARD_LEADTEK_PVR2000, + },{ + .subvendor = 0x1461, + .subdevice = 0x000b, + .card = CX88_BOARD_AVERTV_STUDIO_303, + },{ + .subvendor = 0x1462, + .subdevice = 0x8606, + .card = CX88_BOARD_MSI_TVANYWHERE_MASTER, + },{ + .subvendor = 0x10fc, + .subdevice = 0xd003, + .card = CX88_BOARD_IODATA_GVVCP3PCI, + },{ + .subvendor = 0x1043, + .subdevice = 0x4823, /* with mpeg encoder */ + .card = CX88_BOARD_ASUS_PVR_416, + },{ + .subvendor = 0x17de, + .subdevice = 0x08a6, + .card = CX88_BOARD_KWORLD_DVB_T, + },{ + .subvendor = 0x18ac, + .subdevice = 0xd810, + .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, + },{ + .subvendor = 0x18ac, + .subdevice = 0xd820, + .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb00, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1, + },{ + .subvendor = 0x0070, + .subdevice = 0x9002, + .card = CX88_BOARD_HAUPPAUGE_DVB_T1, + },{ + .subvendor = 0x14f1, + .subdevice = 0x0187, + .card = CX88_BOARD_CONEXANT_DVB_T1, + },{ + .subvendor = 0x1540, + .subdevice = 0x2580, + .card = CX88_BOARD_PROVIDEO_PV259, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb10, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS, + },{ + .subvendor = 0x1554, + .subdevice = 0x4811, + .card = CX88_BOARD_PIXELVIEW, + },{ + .subvendor = 0x7063, + .subdevice = 0x3000, /* HD-3000 card */ + .card = CX88_BOARD_PCHDTV_HD3000, + },{ + .subvendor = 0x17de, + .subdevice = 0xa8a6, + .card = CX88_BOARD_DNTV_LIVE_DVB_T, + },{ + .subvendor = 0x0070, + .subdevice = 0x2801, + .card = CX88_BOARD_HAUPPAUGE_ROSLYN, + },{ + .subvendor = 0x14f1, + .subdevice = 0x0342, + .card = CX88_BOARD_DIGITALLOGIC_MEC, + },{ + .subvendor = 0x10fc, + .subdevice = 0xd035, + .card = CX88_BOARD_IODATA_GVBCTV7E, + },{ + .subvendor = 0x1421, + .subdevice = 0x0334, + .card = CX88_BOARD_ADSTECH_DVB_T_PCI, + },{ + .subvendor = 0x153b, + .subdevice = 0x1166, + .card = CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1, + },{ + .subvendor = 0x18ac, + .subdevice = 0xd500, + .card = CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD, + },{ + .subvendor = 0x1461, + .subdevice = 0x8011, + .card = CX88_BOARD_AVERMEDIA_ULTRATV_MC_550, + },{ + .subvendor = PCI_VENDOR_ID_ATI, + .subdevice = 0xa101, + .card = CX88_BOARD_ATI_HDTVWONDER, + },{ + .subvendor = 0x107d, + .subdevice = 0x665f, + .card = CX88_BOARD_WINFAST_DTV1000, + },{ + .subvendor = 0x1461, + .subdevice = 0x000a, + .card = CX88_BOARD_AVERTV_303, + },{ + .subvendor = 0x0070, + .subdevice = 0x9200, + .card = CX88_BOARD_HAUPPAUGE_NOVASE2_S1, + },{ + .subvendor = 0x0070, + .subdevice = 0x9201, + .card = CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1, + },{ + .subvendor = 0x0070, + .subdevice = 0x9202, + .card = CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1, + },{ + .subvendor = 0x17de, + .subdevice = 0x08b2, + .card = CX88_BOARD_KWORLD_DVBS_100, + },{ + .subvendor = 0x0070, + .subdevice = 0x9400, + .card = CX88_BOARD_HAUPPAUGE_HVR1100, + },{ + .subvendor = 0x0070, + .subdevice = 0x9402, + .card = CX88_BOARD_HAUPPAUGE_HVR1100, + },{ + .subvendor = 0x0070, + .subdevice = 0x9800, + .card = CX88_BOARD_HAUPPAUGE_HVR1100LP, + },{ + .subvendor = 0x0070, + .subdevice = 0x9802, + .card = CX88_BOARD_HAUPPAUGE_HVR1100LP, + },{ + .subvendor = 0x0070, + .subdevice = 0x9001, + .card = CX88_BOARD_HAUPPAUGE_DVB_T1, + },{ + .subvendor = 0x1822, + .subdevice = 0x0025, + .card = CX88_BOARD_DNTV_LIVE_DVB_T_PRO, + },{ + .subvendor = 0x17de, + .subdevice = 0x08a1, + .card = CX88_BOARD_KWORLD_DVB_T_CX22702, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb50, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb54, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL, + /* Re-branded DViCO: DigitalNow DVB-T Dual */ + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb11, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS, + /* Re-branded DViCO: UltraView DVB-T Plus */ + }, { + .subvendor = 0x18ac, + .subdevice = 0xdb30, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO, + }, { + .subvendor = 0x17de, + .subdevice = 0x0840, + .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT, + },{ + .subvendor = 0x1421, + .subdevice = 0x0305, + .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb40, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb44, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID, + },{ + .subvendor = 0x7063, + .subdevice = 0x5500, + .card = CX88_BOARD_PCHDTV_HD5500, + },{ + .subvendor = 0x17de, + .subdevice = 0x0841, + .card = CX88_BOARD_KWORLD_MCE200_DELUXE, + },{ + .subvendor = 0x1822, + .subdevice = 0x0019, + .card = CX88_BOARD_DNTV_LIVE_DVB_T_PRO, + },{ + .subvendor = 0x1554, + .subdevice = 0x4813, + .card = CX88_BOARD_PIXELVIEW_PLAYTV_P7000, + },{ + .subvendor = 0x14f1, + .subdevice = 0x0842, + .card = CX88_BOARD_NPGTECH_REALTV_TOP10FM, + },{ + .subvendor = 0x107d, + .subdevice = 0x665e, + .card = CX88_BOARD_WINFAST_DTV2000H, + },{ + .subvendor = 0x107d, + .subdevice = 0x6f2b, + .card = CX88_BOARD_WINFAST_DTV2000H_J, + },{ + .subvendor = 0x18ac, + .subdevice = 0xd800, /* FusionHDTV 3 Gold (original revision) */ + .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, + },{ + .subvendor = 0x14f1, + .subdevice = 0x0084, + .card = CX88_BOARD_GENIATECH_DVBS, + },{ + .subvendor = 0x0070, + .subdevice = 0x1404, + .card = CX88_BOARD_HAUPPAUGE_HVR3000, + }, { + .subvendor = 0x18ac, + .subdevice = 0xdc00, + .card = CX88_BOARD_SAMSUNG_SMT_7020, + }, { + .subvendor = 0x18ac, + .subdevice = 0xdccd, + .card = CX88_BOARD_SAMSUNG_SMT_7020, + },{ + .subvendor = 0x1461, + .subdevice = 0xc111, /* AverMedia M150-D */ + /* This board is known to work with the ASUS PVR416 config */ + .card = CX88_BOARD_ASUS_PVR_416, + },{ + .subvendor = 0xc180, + .subdevice = 0xc980, + .card = CX88_BOARD_TE_DTV_250_OEM_SWANN, + },{ + .subvendor = 0x0070, + .subdevice = 0x9600, + .card = CX88_BOARD_HAUPPAUGE_HVR1300, + },{ + .subvendor = 0x0070, + .subdevice = 0x9601, + .card = CX88_BOARD_HAUPPAUGE_HVR1300, + },{ + .subvendor = 0x0070, + .subdevice = 0x9602, + .card = CX88_BOARD_HAUPPAUGE_HVR1300, + },{ + .subvendor = 0x107d, + .subdevice = 0x6632, + .card = CX88_BOARD_LEADTEK_PVR2000, + },{ + .subvendor = 0x12ab, + .subdevice = 0x2300, /* Club3D Zap TV2100 */ + .card = CX88_BOARD_KWORLD_DVB_T_CX22702, + },{ + .subvendor = 0x0070, + .subdevice = 0x9000, + .card = CX88_BOARD_HAUPPAUGE_DVB_T1, + },{ + .subvendor = 0x0070, + .subdevice = 0x1400, + .card = CX88_BOARD_HAUPPAUGE_HVR3000, + },{ + .subvendor = 0x0070, + .subdevice = 0x1401, + .card = CX88_BOARD_HAUPPAUGE_HVR3000, + },{ + .subvendor = 0x0070, + .subdevice = 0x1402, + .card = CX88_BOARD_HAUPPAUGE_HVR3000, + },{ + .subvendor = 0x1421, + .subdevice = 0x0341, /* ADS Tech InstantTV DVB-S */ + .card = CX88_BOARD_KWORLD_DVBS_100, + },{ + .subvendor = 0x1421, + .subdevice = 0x0390, + .card = CX88_BOARD_ADSTECH_PTV_390, + },{ + .subvendor = 0x11bd, + .subdevice = 0x0051, + .card = CX88_BOARD_PINNACLE_PCTV_HD_800i, + }, { + .subvendor = 0x18ac, + .subdevice = 0xd530, + .card = CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO, + }, { + .subvendor = 0x12ab, + .subdevice = 0x1788, + .card = CX88_BOARD_PINNACLE_HYBRID_PCTV, + }, { + .subvendor = 0x14f1, + .subdevice = 0xea3d, + .card = CX88_BOARD_POWERCOLOR_REAL_ANGEL, + }, { + .subvendor = 0x107d, + .subdevice = 0x6f18, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8852, + .card = CX88_BOARD_GENIATECH_X8000_MT, + }, { + .subvendor = 0x18ac, + .subdevice = 0xd610, + .card = CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD, + }, { + .subvendor = 0x1554, + .subdevice = 0x4935, + .card = CX88_BOARD_PROLINK_PV_8000GT, + }, { + .subvendor = 0x1554, + .subdevice = 0x4976, + .card = CX88_BOARD_PROLINK_PV_GLOBAL_XTREME, + }, { + .subvendor = 0x17de, + .subdevice = 0x08c1, + .card = CX88_BOARD_KWORLD_ATSC_120, + }, { + .subvendor = 0x0070, + .subdevice = 0x6900, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6904, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6902, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6905, + .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, + }, { + .subvendor = 0x0070, + .subdevice = 0x6906, + .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, + }, { + .subvendor = 0xd420, + .subdevice = 0x9022, + .card = CX88_BOARD_TEVII_S420, + }, { + .subvendor = 0xd460, + .subdevice = 0x9022, + .card = CX88_BOARD_TEVII_S460, + }, { + .subvendor = 0xd464, + .subdevice = 0x9022, + .card = CX88_BOARD_TEVII_S464, + }, { + .subvendor = 0xA044, + .subdevice = 0x2011, + .card = CX88_BOARD_OMICOM_SS4_PCI, + }, { + .subvendor = 0x8910, + .subdevice = 0x8888, + .card = CX88_BOARD_TBS_8910, + }, { + .subvendor = 0x8920, + .subdevice = 0x8888, + .card = CX88_BOARD_TBS_8920, + }, { + .subvendor = 0xb022, + .subdevice = 0x3022, + .card = CX88_BOARD_PROF_6200, + }, { + .subvendor = 0xB033, + .subdevice = 0x3033, + .card = CX88_BOARD_PROF_7300, + }, { + .subvendor = 0xb200, + .subdevice = 0x4200, + .card = CX88_BOARD_SATTRADE_ST4200, + }, { + .subvendor = 0x153b, + .subdevice = 0x1177, + .card = CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII, + }, { + .subvendor = 0x0070, + .subdevice = 0x9290, + .card = CX88_BOARD_HAUPPAUGE_IRONLY, + }, { + .subvendor = 0x107d, + .subdevice = 0x6654, + .card = CX88_BOARD_WINFAST_DTV1800H, + }, { + /* WinFast DTV1800 H with XC4000 tuner */ + .subvendor = 0x107d, + .subdevice = 0x6f38, + .card = CX88_BOARD_WINFAST_DTV1800H_XC4000, + }, { + .subvendor = 0x107d, + .subdevice = 0x6f42, + .card = CX88_BOARD_WINFAST_DTV2000H_PLUS, + }, { + /* PVR2000 PAL Model [107d:6630] */ + .subvendor = 0x107d, + .subdevice = 0x6630, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 PAL Model [107d:6638] */ + .subvendor = 0x107d, + .subdevice = 0x6638, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:6631] */ + .subvendor = 0x107d, + .subdevice = 0x6631, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:6637] */ + .subvendor = 0x107d, + .subdevice = 0x6637, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:663d] */ + .subvendor = 0x107d, + .subdevice = 0x663d, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* DV2000 NTSC Model [107d:6621] */ + .subvendor = 0x107d, + .subdevice = 0x6621, + .card = CX88_BOARD_WINFAST_DV2000, + }, { + /* TV2000 XP Global [107d:6618] */ + .subvendor = 0x107d, + .subdevice = 0x6618, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL, + }, { + /* TV2000 XP Global [107d:6618] */ + .subvendor = 0x107d, + .subdevice = 0x6619, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL, + }, { + /* WinFast TV2000 XP Global with XC4000 tuner */ + .subvendor = 0x107d, + .subdevice = 0x6f36, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36, + }, { + /* WinFast TV2000 XP Global with XC4000 tuner and different GPIOs */ + .subvendor = 0x107d, + .subdevice = 0x6f43, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43, + }, { + .subvendor = 0xb034, + .subdevice = 0x3034, + .card = CX88_BOARD_PROF_7301, + }, { + .subvendor = 0x1822, + .subdevice = 0x0023, + .card = CX88_BOARD_TWINHAN_VP1027_DVBS, + }, +}; + +/* ----------------------------------------------------------------------- */ +/* some leadtek specific stuff */ + +static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) +{ + if (eeprom_data[4] != 0x7d || + eeprom_data[5] != 0x10 || + eeprom_data[7] != 0x66) { + warn_printk(core, "Leadtek eeprom invalid.\n"); + return; + } + + /* Terry Wu */ + switch (eeprom_data[6]) { + case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */ + case 0x21: /* SSID 6621 for DV2000 NTSC Model */ + case 0x31: /* SSID 6631 for PVR2000 NTSC Model */ + case 0x37: /* SSID 6637 for PVR2000 NTSC Model */ + case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */ + core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3; + break; + default: + core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3; + break; + } + + info_printk(core, "Leadtek Winfast 2000XP Expert config: " + "tuner=%d, eeprom[0]=0x%02x\n", + core->board.tuner_type, eeprom_data[0]); +} + +static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data) +{ + struct tveeprom tv; + + tveeprom_hauppauge_analog(&core->i2c_client, &tv, eeprom_data); + core->board.tuner_type = tv.tuner_type; + core->tuner_formats = tv.tuner_formats; + core->board.radio.type = tv.has_radio ? CX88_RADIO : 0; + core->model = tv.model; + + /* Make sure we support the board model */ + switch (tv.model) + { + case 14009: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in) */ + case 14019: /* WinTV-HVR3000 (Retail, IR Blaster, b/panel video, 3.5mm audio in) */ + case 14029: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - 880 bridge) */ + case 14109: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - low profile) */ + case 14129: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - 880 bridge - LP) */ + case 14559: /* WinTV-HVR3000 (OEM, no IR, b/panel video, 3.5mm audio in) */ + case 14569: /* WinTV-HVR3000 (OEM, no IR, no back panel video) */ + case 14659: /* WinTV-HVR3000 (OEM, no IR, b/panel video, RCA audio in - Low profile) */ + case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */ + case 28552: /* WinTV-PVR 'Roslyn' (No IR) */ + case 34519: /* WinTV-PCI-FM */ + case 69009: + /* WinTV-HVR4000 (DVBS/S2/T, Video and IR, back panel inputs) */ + case 69100: /* WinTV-HVR4000LITE (DVBS/S2, IR) */ + case 69500: /* WinTV-HVR4000LITE (DVBS/S2, No IR) */ + case 69559: + /* WinTV-HVR4000 (DVBS/S2/T, Video no IR, back panel inputs) */ + case 69569: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR) */ + case 90002: /* Nova-T-PCI (9002) */ + case 92001: /* Nova-S-Plus (Video and IR) */ + case 92002: /* Nova-S-Plus (Video and IR) */ + case 90003: /* Nova-T-PCI (9002 No RF out) */ + case 90500: /* Nova-T-PCI (oem) */ + case 90501: /* Nova-T-PCI (oem/IR) */ + case 92000: /* Nova-SE2 (OEM, No Video or IR) */ + case 92900: /* WinTV-IROnly (No analog or digital Video inputs) */ + case 94009: /* WinTV-HVR1100 (Video and IR Retail) */ + case 94501: /* WinTV-HVR1100 (Video and IR OEM) */ + case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */ + case 96019: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX/TX) */ + case 96559: /* WinTV-HVR1300 (PAL Video, MPEG Video no IR) */ + case 96569: /* WinTV-HVR1300 () */ + case 96659: /* WinTV-HVR1300 () */ + case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */ + /* known */ + break; + case CX88_BOARD_SAMSUNG_SMT_7020: + cx_set(MO_GP0_IO, 0x008989FF); + break; + default: + warn_printk(core, "warning: unknown hauppauge model #%d\n", + tv.model); + break; + } + + info_printk(core, "hauppauge eeprom: model=%d\n", tv.model); +} + +/* ----------------------------------------------------------------------- */ +/* some GDI (was: Modular Technology) specific stuff */ + +static const struct { + int id; + int fm; + const char *name; +} gdi_tuner[] = { + [ 0x01 ] = { .id = TUNER_ABSENT, + .name = "NTSC_M" }, + [ 0x02 ] = { .id = TUNER_ABSENT, + .name = "PAL_B" }, + [ 0x03 ] = { .id = TUNER_ABSENT, + .name = "PAL_I" }, + [ 0x04 ] = { .id = TUNER_ABSENT, + .name = "PAL_D" }, + [ 0x05 ] = { .id = TUNER_ABSENT, + .name = "SECAM" }, + + [ 0x10 ] = { .id = TUNER_ABSENT, + .fm = 1, + .name = "TEMIC_4049" }, + [ 0x11 ] = { .id = TUNER_TEMIC_4136FY5, + .name = "TEMIC_4136" }, + [ 0x12 ] = { .id = TUNER_ABSENT, + .name = "TEMIC_4146" }, + + [ 0x20 ] = { .id = TUNER_PHILIPS_FQ1216ME, + .fm = 1, + .name = "PHILIPS_FQ1216_MK3" }, + [ 0x21 ] = { .id = TUNER_ABSENT, .fm = 1, + .name = "PHILIPS_FQ1236_MK3" }, + [ 0x22 ] = { .id = TUNER_ABSENT, + .name = "PHILIPS_FI1236_MK3" }, + [ 0x23 ] = { .id = TUNER_ABSENT, + .name = "PHILIPS_FI1216_MK3" }, +}; + +static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data) +{ + const char *name = (eeprom_data[0x0d] < ARRAY_SIZE(gdi_tuner)) + ? gdi_tuner[eeprom_data[0x0d]].name : NULL; + + info_printk(core, "GDI: tuner=%s\n", name ? name : "unknown"); + if (NULL == name) + return; + core->board.tuner_type = gdi_tuner[eeprom_data[0x0d]].id; + core->board.radio.type = gdi_tuner[eeprom_data[0x0d]].fm ? + CX88_RADIO : 0; +} + +/* ------------------------------------------------------------------- */ +/* some Divco specific stuff */ +static int cx88_dvico_xc2028_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + switch (core->boardnr) { + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + /* GPIO-4 xc3028 tuner */ + + cx_set(MO_GP0_IO, 0x00001000); + cx_clear(MO_GP0_IO, 0x00000010); + msleep(100); + cx_set(MO_GP0_IO, 0x00000010); + msleep(100); + break; + default: + cx_write(MO_GP0_IO, 0x101000); + mdelay(5); + cx_set(MO_GP0_IO, 0x101010); + } + break; + default: + return -EINVAL; + } + + return 0; +} + + +/* ----------------------------------------------------------------------- */ +/* some Geniatech specific stuff */ + +static int cx88_xc3028_geniatech_tuner_callback(struct cx88_core *core, + int command, int mode) +{ + switch (command) { + case XC2028_TUNER_RESET: + switch (INPUT(core->input).type) { + case CX88_RADIO: + break; + case CX88_VMUX_DVB: + cx_write(MO_GP1_IO, 0x030302); + mdelay(50); + break; + default: + cx_write(MO_GP1_IO, 0x030301); + mdelay(50); + } + cx_write(MO_GP1_IO, 0x101010); + mdelay(50); + cx_write(MO_GP1_IO, 0x101000); + mdelay(50); + cx_write(MO_GP1_IO, 0x101010); + mdelay(50); + return 0; + } + return -EINVAL; +} + +static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + /* GPIO 12 (xc3028 tuner reset) */ + cx_set(MO_GP1_IO, 0x1010); + mdelay(50); + cx_clear(MO_GP1_IO, 0x10); + mdelay(75); + cx_set(MO_GP1_IO, 0x10); + mdelay(75); + return 0; + } + return -EINVAL; +} + +static int cx88_xc4000_winfast2000h_plus_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC4000_TUNER_RESET: + /* GPIO 12 (xc4000 tuner reset) */ + cx_set(MO_GP1_IO, 0x1010); + mdelay(50); + cx_clear(MO_GP1_IO, 0x10); + mdelay(75); + cx_set(MO_GP1_IO, 0x10); + mdelay(75); + return 0; + } + return -EINVAL; +} + +/* ------------------------------------------------------------------- */ +/* some Divco specific stuff */ +static int cx88_pv_8000gt_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + cx_write(MO_GP2_IO, 0xcf7); + mdelay(50); + cx_write(MO_GP2_IO, 0xef5); + mdelay(50); + cx_write(MO_GP2_IO, 0xcf7); + break; + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ +/* some DViCO specific stuff */ + +static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core) +{ + struct i2c_msg msg = { .addr = 0x45, .flags = 0 }; + int i, err; + static u8 init_bufs[13][5] = { + { 0x10, 0x00, 0x20, 0x01, 0x03 }, + { 0x10, 0x10, 0x01, 0x00, 0x21 }, + { 0x10, 0x10, 0x10, 0x00, 0xCA }, + { 0x10, 0x10, 0x12, 0x00, 0x08 }, + { 0x10, 0x10, 0x13, 0x00, 0x0A }, + { 0x10, 0x10, 0x16, 0x01, 0xC0 }, + { 0x10, 0x10, 0x22, 0x01, 0x3D }, + { 0x10, 0x10, 0x73, 0x01, 0x2E }, + { 0x10, 0x10, 0x72, 0x00, 0xC5 }, + { 0x10, 0x10, 0x71, 0x01, 0x97 }, + { 0x10, 0x10, 0x70, 0x00, 0x0F }, + { 0x10, 0x10, 0xB0, 0x00, 0x01 }, + { 0x03, 0x0C }, + }; + + for (i = 0; i < ARRAY_SIZE(init_bufs); i++) { + msg.buf = init_bufs[i]; + msg.len = (i != 12 ? 5 : 2); + err = i2c_transfer(&core->i2c_adap, &msg, 1); + if (err != 1) { + warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d " + "failed (err = %d)!\n", i, err); + return; + } + } +} + +static int cx88_xc2028_tuner_callback(struct cx88_core *core, + int command, int arg) +{ + /* Board-specific callbacks */ + switch (core->boardnr) { + case CX88_BOARD_POWERCOLOR_REAL_ANGEL: + case CX88_BOARD_GENIATECH_X8000_MT: + case CX88_BOARD_KWORLD_ATSC_120: + return cx88_xc3028_geniatech_tuner_callback(core, + command, arg); + case CX88_BOARD_PROLINK_PV_8000GT: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: + return cx88_pv_8000gt_callback(core, command, arg); + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + return cx88_dvico_xc2028_callback(core, command, arg); + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: + case CX88_BOARD_WINFAST_DTV1800H: + return cx88_xc3028_winfast1800h_callback(core, command, arg); + } + + switch (command) { + case XC2028_TUNER_RESET: + switch (INPUT(core->input).type) { + case CX88_RADIO: + dprintk(1, "setting GPIO to radio!\n"); + cx_write(MO_GP0_IO, 0x4ff); + mdelay(250); + cx_write(MO_GP2_IO, 0xff); + mdelay(250); + break; + case CX88_VMUX_DVB: /* Digital TV*/ + default: /* Analog TV */ + dprintk(1, "setting GPIO to TV!\n"); + break; + } + cx_write(MO_GP1_IO, 0x101010); + mdelay(250); + cx_write(MO_GP1_IO, 0x101000); + mdelay(250); + cx_write(MO_GP1_IO, 0x101010); + mdelay(250); + return 0; + } + return -EINVAL; +} + +static int cx88_xc4000_tuner_callback(struct cx88_core *core, + int command, int arg) +{ + /* Board-specific callbacks */ + switch (core->boardnr) { + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43: + return cx88_xc4000_winfast2000h_plus_callback(core, + command, arg); + } + return -EINVAL; +} + +/* ----------------------------------------------------------------------- */ +/* Tuner callback function. Currently only needed for the Pinnacle * + * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both * + * analog tuner attach (tuner-core.c) and dvb tuner attach (cx88-dvb.c) */ + +static int cx88_xc5000_tuner_callback(struct cx88_core *core, + int command, int arg) +{ + switch (core->boardnr) { + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + if (command == 0) { /* This is the reset command from xc5000 */ + + /* djh - According to the engineer at PCTV Systems, + the xc5000 reset pin is supposed to be on GPIO12. + However, despite three nights of effort, pulling + that GPIO low didn't reset the xc5000. While + pulling MO_SRST_IO low does reset the xc5000, this + also resets in the s5h1409 being reset as well. + This causes tuning to always fail since the internal + state of the s5h1409 does not match the driver's + state. Given that the only two conditions in which + the driver performs a reset is during firmware load + and powering down the chip, I am taking out the + reset. We know that the chip is being reset + when the cx88 comes online, and not being able to + do power management for this board is worse than + not having any tuning at all. */ + return 0; + } else { + dprintk(1, "xc5000: unknown tuner callback command.\n"); + return -EINVAL; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + if (command == 0) { /* This is the reset command from xc5000 */ + cx_clear(MO_GP0_IO, 0x00000010); + msleep(10); + cx_set(MO_GP0_IO, 0x00000010); + return 0; + } else { + dprintk(1, "xc5000: unknown tuner callback command.\n"); + return -EINVAL; + } + break; + } + return 0; /* Should never be here */ +} + +int cx88_tuner_callback(void *priv, int component, int command, int arg) +{ + struct i2c_algo_bit_data *i2c_algo = priv; + struct cx88_core *core; + + if (!i2c_algo) { + printk(KERN_ERR "cx88: Error - i2c private data undefined.\n"); + return -EINVAL; + } + + core = i2c_algo->data; + + if (!core) { + printk(KERN_ERR "cx88: Error - device struct undefined.\n"); + return -EINVAL; + } + + if (component != DVB_FRONTEND_COMPONENT_TUNER) + return -EINVAL; + + switch (core->board.tuner_type) { + case TUNER_XC2028: + dprintk(1, "Calling XC2028/3028 callback\n"); + return cx88_xc2028_tuner_callback(core, command, arg); + case TUNER_XC4000: + dprintk(1, "Calling XC4000 callback\n"); + return cx88_xc4000_tuner_callback(core, command, arg); + case TUNER_XC5000: + dprintk(1, "Calling XC5000 callback\n"); + return cx88_xc5000_tuner_callback(core, command, arg); + } + err_printk(core, "Error: Calling callback for tuner %d\n", + core->board.tuner_type); + return -EINVAL; +} +EXPORT_SYMBOL(cx88_tuner_callback); + +/* ----------------------------------------------------------------------- */ + +static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci) +{ + int i; + + if (0 == pci->subsystem_vendor && + 0 == pci->subsystem_device) { + printk(KERN_ERR + "%s: Your board has no valid PCI Subsystem ID and thus can't\n" + "%s: be autodetected. Please pass card= insmod option to\n" + "%s: workaround that. Redirect complaints to the vendor of\n" + "%s: the TV card. Best regards,\n" + "%s: -- tux\n", + core->name,core->name,core->name,core->name,core->name); + } else { + printk(KERN_ERR + "%s: Your board isn't known (yet) to the driver. You can\n" + "%s: try to pick one of the existing card configs via\n" + "%s: card= insmod option. Updating to the latest\n" + "%s: version might help as well.\n", + core->name,core->name,core->name,core->name); + } + err_printk(core, "Here is a list of valid choices for the card= " + "insmod option:\n"); + for (i = 0; i < ARRAY_SIZE(cx88_boards); i++) + printk(KERN_ERR "%s: card=%d -> %s\n", + core->name, i, cx88_boards[i].name); +} + +static void cx88_card_setup_pre_i2c(struct cx88_core *core) +{ + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* + * Bring the 702 demod up before i2c scanning/attach or devices are hidden + * We leave here with the 702 on the bus + * + * "reset the IR receiver on GPIO[3]" + * Reported by Mike Crash + */ + cx_write(MO_GP0_IO, 0x0000ef88); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000088); + udelay(50); + cx_set(MO_GP0_IO, 0x00000088); /* 702 out of reset */ + udelay(1000); + break; + + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: + case CX88_BOARD_PROLINK_PV_8000GT: + cx_write(MO_GP2_IO, 0xcf7); + mdelay(50); + cx_write(MO_GP2_IO, 0xef5); + mdelay(50); + cx_write(MO_GP2_IO, 0xcf7); + msleep(10); + break; + + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + /* Enable the xc5000 tuner */ + cx_set(MO_GP0_IO, 0x00001010); + break; + + case CX88_BOARD_WINFAST_DTV2000H_J: + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + /* Init GPIO */ + cx_write(MO_GP0_IO, core->board.input[0].gpio0); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */ + udelay(1000); + break; + + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: + case CX88_BOARD_WINFAST_DTV1800H: + cx88_xc3028_winfast1800h_callback(core, XC2028_TUNER_RESET, 0); + break; + + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43: + cx88_xc4000_winfast2000h_plus_callback(core, + XC4000_TUNER_RESET, 0); + break; + + case CX88_BOARD_TWINHAN_VP1027_DVBS: + cx_write(MO_GP0_IO, 0x00003230); + cx_write(MO_GP0_IO, 0x00003210); + msleep(1); + cx_write(MO_GP0_IO, 0x00001230); + break; + } +} + +/* + * Sets board-dependent xc3028 configuration + */ +void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) +{ + memset(ctl, 0, sizeof(*ctl)); + + ctl->fname = XC2028_DEFAULT_FIRMWARE; + ctl->max_len = 64; + + switch (core->boardnr) { + case CX88_BOARD_POWERCOLOR_REAL_ANGEL: + /* Now works with firmware version 2.7 */ + if (core->i2c_algo.udelay < 16) + core->i2c_algo.udelay = 16; + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + case CX88_BOARD_WINFAST_DTV1800H: + ctl->demod = XC3028_FE_ZARLINK456; + break; + case CX88_BOARD_KWORLD_ATSC_120: + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + ctl->demod = XC3028_FE_OREN538; + break; + case CX88_BOARD_GENIATECH_X8000_MT: + /* FIXME: For this board, the xc3028 never recovers after being + powered down (the reset GPIO probably is not set properly). + We don't have access to the hardware so we cannot determine + which GPIO is used for xc3028, so just disable power xc3028 + power management for now */ + ctl->disable_power_mgmt = 1; + break; + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: + case CX88_BOARD_PROLINK_PV_8000GT: + /* + * Those boards uses non-MTS firmware + */ + break; + case CX88_BOARD_PINNACLE_HYBRID_PCTV: + case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII: + ctl->demod = XC3028_FE_ZARLINK456; + ctl->mts = 1; + break; + default: + ctl->demod = XC3028_FE_OREN538; + ctl->mts = 1; + } +} +EXPORT_SYMBOL_GPL(cx88_setup_xc3028); + +static void cx88_card_setup(struct cx88_core *core) +{ + static u8 eeprom[256]; + struct tuner_setup tun_setup; + unsigned int mode_mask = T_RADIO | T_ANALOG_TV; + + memset(&tun_setup, 0, sizeof(tun_setup)); + + if (0 == core->i2c_rc) { + core->i2c_client.addr = 0xa0 >> 1; + tveeprom_read(&core->i2c_client, eeprom, sizeof(eeprom)); + } + + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE: + case CX88_BOARD_HAUPPAUGE_ROSLYN: + if (0 == core->i2c_rc) + hauppauge_eeprom(core, eeprom+8); + break; + case CX88_BOARD_GDI: + if (0 == core->i2c_rc) + gdi_eeprom(core, eeprom); + break; + case CX88_BOARD_LEADTEK_PVR2000: + case CX88_BOARD_WINFAST_DV2000: + case CX88_BOARD_WINFAST2000XP_EXPERT: + if (0 == core->i2c_rc) + leadtek_eeprom(core, eeprom); + break; + case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: + case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: + case CX88_BOARD_HAUPPAUGE_DVB_T1: + case CX88_BOARD_HAUPPAUGE_HVR1100: + case CX88_BOARD_HAUPPAUGE_HVR1100LP: + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR1300: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + case CX88_BOARD_HAUPPAUGE_IRONLY: + if (0 == core->i2c_rc) + hauppauge_eeprom(core, eeprom); + break; + case CX88_BOARD_KWORLD_DVBS_100: + cx_write(MO_GP0_IO, 0x000007f8); + cx_write(MO_GP1_IO, 0x00000001); + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + /* GPIO0:0 is hooked to demod reset */ + /* GPIO0:4 is hooked to xc3028 reset */ + cx_write(MO_GP0_IO, 0x00111100); + msleep(1); + cx_write(MO_GP0_IO, 0x00111111); + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: + /* GPIO0:6 is hooked to FX2 reset pin */ + cx_set(MO_GP0_IO, 0x00004040); + cx_clear(MO_GP0_IO, 0x00000040); + msleep(1000); + cx_set(MO_GP0_IO, 0x00004040); + /* FALLTHROUGH */ + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: + /* GPIO0:0 is hooked to mt352 reset pin */ + cx_set(MO_GP0_IO, 0x00000101); + cx_clear(MO_GP0_IO, 0x00000001); + msleep(1); + cx_set(MO_GP0_IO, 0x00000101); + if (0 == core->i2c_rc && + core->boardnr == CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID) + dvico_fusionhdtv_hybrid_init(core); + break; + case CX88_BOARD_KWORLD_DVB_T: + case CX88_BOARD_DNTV_LIVE_DVB_T: + cx_set(MO_GP0_IO, 0x00000707); + cx_set(MO_GP2_IO, 0x00000101); + cx_clear(MO_GP2_IO, 0x00000001); + msleep(1); + cx_clear(MO_GP0_IO, 0x00000007); + cx_set(MO_GP2_IO, 0x00000101); + break; + case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: + cx_write(MO_GP0_IO, 0x00080808); + break; + case CX88_BOARD_ATI_HDTVWONDER: + if (0 == core->i2c_rc) { + /* enable tuner */ + int i; + static const u8 buffer [][2] = { + {0x10,0x12}, + {0x13,0x04}, + {0x16,0x00}, + {0x14,0x04}, + {0x17,0x00} + }; + core->i2c_client.addr = 0x0a; + + for (i = 0; i < ARRAY_SIZE(buffer); i++) + if (2 != i2c_master_send(&core->i2c_client, + buffer[i],2)) + warn_printk(core, "Unable to enable " + "tuner(%i).\n", i); + } + break; + case CX88_BOARD_MSI_TVANYWHERE_MASTER: + { + struct v4l2_priv_tun_config tea5767_cfg; + struct tea5767_ctrl ctl; + + memset(&ctl, 0, sizeof(ctl)); + + ctl.high_cut = 1; + ctl.st_noise = 1; + ctl.deemph_75 = 1; + ctl.xtal_freq = TEA5767_HIGH_LO_13MHz; + + tea5767_cfg.tuner = TUNER_TEA5767; + tea5767_cfg.priv = &ctl; + + call_all(core, tuner, s_config, &tea5767_cfg); + break; + } + case CX88_BOARD_TEVII_S420: + case CX88_BOARD_TEVII_S460: + case CX88_BOARD_TEVII_S464: + case CX88_BOARD_OMICOM_SS4_PCI: + case CX88_BOARD_TBS_8910: + case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_6200: + case CX88_BOARD_PROF_7300: + case CX88_BOARD_PROF_7301: + case CX88_BOARD_SATTRADE_ST4200: + cx_write(MO_GP0_IO, 0x8000); + msleep(100); + cx_write(MO_SRST_IO, 0); + msleep(10); + cx_write(MO_GP0_IO, 0x8080); + msleep(100); + cx_write(MO_SRST_IO, 1); + msleep(100); + break; + } /*end switch() */ + + + /* Setup tuners */ + if ((core->board.radio_type != UNSET)) { + tun_setup.mode_mask = T_RADIO; + tun_setup.type = core->board.radio_type; + tun_setup.addr = core->board.radio_addr; + tun_setup.tuner_callback = cx88_tuner_callback; + call_all(core, tuner, s_type_addr, &tun_setup); + mode_mask &= ~T_RADIO; + } + + if (core->board.tuner_type != TUNER_ABSENT) { + tun_setup.mode_mask = mode_mask; + tun_setup.type = core->board.tuner_type; + tun_setup.addr = core->board.tuner_addr; + tun_setup.tuner_callback = cx88_tuner_callback; + + call_all(core, tuner, s_type_addr, &tun_setup); + } + + if (core->board.tda9887_conf) { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &core->board.tda9887_conf; + + call_all(core, tuner, s_config, &tda9887_cfg); + } + + if (core->board.tuner_type == TUNER_XC2028) { + struct v4l2_priv_tun_config xc2028_cfg; + struct xc2028_ctrl ctl; + + /* Fills device-dependent initialization parameters */ + cx88_setup_xc3028(core, &ctl); + + /* Sends parameters to xc2028/3028 tuner */ + memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); + xc2028_cfg.tuner = TUNER_XC2028; + xc2028_cfg.priv = &ctl; + dprintk(1, "Asking xc2028/3028 to load firmware %s\n", + ctl.fname); + call_all(core, tuner, s_config, &xc2028_cfg); + } + call_all(core, core, s_power, 0); +} + +/* ------------------------------------------------------------------ */ + +static int cx88_pci_quirks(const char *name, struct pci_dev *pci) +{ + unsigned int lat = UNSET; + u8 ctrl = 0; + u8 value; + + /* check pci quirks */ + if (pci_pci_problems & PCIPCI_TRITON) { + printk(KERN_INFO "%s: quirk: PCIPCI_TRITON -- set TBFX\n", + name); + ctrl |= CX88X_EN_TBFX; + } + if (pci_pci_problems & PCIPCI_NATOMA) { + printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA -- set TBFX\n", + name); + ctrl |= CX88X_EN_TBFX; + } + if (pci_pci_problems & PCIPCI_VIAETBF) { + printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF -- set TBFX\n", + name); + ctrl |= CX88X_EN_TBFX; + } + if (pci_pci_problems & PCIPCI_VSFX) { + printk(KERN_INFO "%s: quirk: PCIPCI_VSFX -- set VSFX\n", + name); + ctrl |= CX88X_EN_VSFX; + } +#ifdef PCIPCI_ALIMAGIK + if (pci_pci_problems & PCIPCI_ALIMAGIK) { + printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n", + name); + lat = 0x0A; + } +#endif + + /* check insmod options */ + if (UNSET != latency) + lat = latency; + + /* apply stuff */ + if (ctrl) { + pci_read_config_byte(pci, CX88X_DEVCTRL, &value); + value |= ctrl; + pci_write_config_byte(pci, CX88X_DEVCTRL, value); + } + if (UNSET != lat) { + printk(KERN_INFO "%s: setting pci latency timer to %d\n", + name, latency); + pci_write_config_byte(pci, PCI_LATENCY_TIMER, latency); + } + return 0; +} + +int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci) +{ + if (request_mem_region(pci_resource_start(pci,0), + pci_resource_len(pci,0), + core->name)) + return 0; + printk(KERN_ERR + "%s/%d: Can't get MMIO memory @ 0x%llx, subsystem: %04x:%04x\n", + core->name, PCI_FUNC(pci->devfn), + (unsigned long long)pci_resource_start(pci, 0), + pci->subsystem_vendor, pci->subsystem_device); + return -EBUSY; +} + +/* Allocate and initialize the cx88 core struct. One should hold the + * devlist mutex before calling this. */ +struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) +{ + struct cx88_core *core; + int i; + + core = kzalloc(sizeof(*core), GFP_KERNEL); + if (core == NULL) + return NULL; + + atomic_inc(&core->refcount); + core->pci_bus = pci->bus->number; + core->pci_slot = PCI_SLOT(pci->devfn); + core->pci_irqmask = PCI_INT_RISC_RD_BERRINT | PCI_INT_RISC_WR_BERRINT | + PCI_INT_BRDG_BERRINT | PCI_INT_SRC_DMA_BERRINT | + PCI_INT_DST_DMA_BERRINT | PCI_INT_IPB_DMA_BERRINT; + mutex_init(&core->lock); + + core->nr = nr; + sprintf(core->name, "cx88[%d]", core->nr); + + strcpy(core->v4l2_dev.name, core->name); + if (v4l2_device_register(NULL, &core->v4l2_dev)) { + kfree(core); + return NULL; + } + + if (v4l2_ctrl_handler_init(&core->video_hdl, 13)) { + v4l2_device_unregister(&core->v4l2_dev); + kfree(core); + return NULL; + } + + if (v4l2_ctrl_handler_init(&core->audio_hdl, 13)) { + v4l2_ctrl_handler_free(&core->video_hdl); + v4l2_device_unregister(&core->v4l2_dev); + kfree(core); + return NULL; + } + + if (0 != cx88_get_resources(core, pci)) { + v4l2_ctrl_handler_free(&core->video_hdl); + v4l2_ctrl_handler_free(&core->audio_hdl); + v4l2_device_unregister(&core->v4l2_dev); + kfree(core); + return NULL; + } + + /* PCI stuff */ + cx88_pci_quirks(core->name, pci); + core->lmmio = ioremap(pci_resource_start(pci, 0), + pci_resource_len(pci, 0)); + core->bmmio = (u8 __iomem *)core->lmmio; + + if (core->lmmio == NULL) { + release_mem_region(pci_resource_start(pci, 0), + pci_resource_len(pci, 0)); + v4l2_ctrl_handler_free(&core->video_hdl); + v4l2_ctrl_handler_free(&core->audio_hdl); + v4l2_device_unregister(&core->v4l2_dev); + kfree(core); + return NULL; + } + + /* board config */ + core->boardnr = UNSET; + if (card[core->nr] < ARRAY_SIZE(cx88_boards)) + core->boardnr = card[core->nr]; + for (i = 0; UNSET == core->boardnr && i < ARRAY_SIZE(cx88_subids); i++) + if (pci->subsystem_vendor == cx88_subids[i].subvendor && + pci->subsystem_device == cx88_subids[i].subdevice) + core->boardnr = cx88_subids[i].card; + if (UNSET == core->boardnr) { + core->boardnr = CX88_BOARD_UNKNOWN; + cx88_card_list(core, pci); + } + + core->board = cx88_boards[core->boardnr]; + + if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB)) + core->board.num_frontends = 1; + + info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n", + pci->subsystem_vendor, pci->subsystem_device, core->board.name, + core->boardnr, card[core->nr] == core->boardnr ? + "insmod option" : "autodetected", + core->board.num_frontends); + + if (tuner[core->nr] != UNSET) + core->board.tuner_type = tuner[core->nr]; + if (radio[core->nr] != UNSET) + core->board.radio_type = radio[core->nr]; + + dprintk(1, "TV tuner type %d, Radio tuner type %d\n", + core->board.tuner_type, core->board.radio_type); + + /* init hardware */ + cx88_reset(core); + cx88_card_setup_pre_i2c(core); + cx88_i2c_init(core, pci); + + /* load tuner module, if needed */ + if (TUNER_ABSENT != core->board.tuner_type) { + /* Ignore 0x6b and 0x6f on cx88 boards. + * FusionHDTV5 RT Gold has an ir receiver at 0x6b + * and an RTC at 0x6f which can get corrupted if probed. */ + static const unsigned short tv_addrs[] = { + 0x42, 0x43, 0x4a, 0x4b, /* tda8290 */ + 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + 0x68, 0x69, 0x6a, 0x6c, 0x6d, 0x6e, + I2C_CLIENT_END + }; + int has_demod = (core->board.tda9887_conf & TDA9887_PRESENT); + + /* I don't trust the radio_type as is stored in the card + definitions, so we just probe for it. + The radio_type is sometimes missing, or set to UNSET but + later code configures a tea5767. + */ + v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, + "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); + if (has_demod) + v4l2_i2c_new_subdev(&core->v4l2_dev, + &core->i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + if (core->board.tuner_addr == ADDR_UNSET) { + v4l2_i2c_new_subdev(&core->v4l2_dev, + &core->i2c_adap, "tuner", + 0, has_demod ? tv_addrs + 4 : tv_addrs); + } else { + v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, + "tuner", core->board.tuner_addr, NULL); + } + } + + cx88_card_setup(core); + if (!disable_ir) { + cx88_i2c_init_ir(core); + cx88_ir_init(core, pci); + } + + return core; +} diff --git a/drivers/media/pci/cx88/cx88-core.c b/drivers/media/pci/cx88/cx88-core.c new file mode 100644 index 00000000..c8f3dcc5 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-core.c @@ -0,0 +1,1133 @@ +/* + * + * device driver for Conexant 2388x based TV cards + * driver core + * + * (c) 2003 Gerd Knorr [SuSE Labs] + * + * (c) 2005-2006 Mauro Carvalho Chehab + * - Multituner support + * - video_ioctl2 conversion + * - PAL/M fixes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx88.h" +#include +#include + +MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards"); +MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); +MODULE_LICENSE("GPL"); + +/* ------------------------------------------------------------------ */ + +unsigned int cx88_core_debug; +module_param_named(core_debug, cx88_core_debug, int, 0644); +MODULE_PARM_DESC(core_debug, "enable debug messages [core]"); + +static unsigned int nicam; +module_param(nicam,int,0644); +MODULE_PARM_DESC(nicam,"tv audio is nicam"); + +static unsigned int nocomb; +module_param(nocomb,int,0644); +MODULE_PARM_DESC(nocomb,"disable comb filter"); + +#define dprintk(level,fmt, arg...) do { \ + if (cx88_core_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, core->name , ## arg); \ + } while(0) + +static unsigned int cx88_devcount; +static LIST_HEAD(cx88_devlist); +static DEFINE_MUTEX(devlist); + +#define NO_SYNC_LINE (-1U) + +/* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be + generated _after_ lpi lines are transferred. */ +static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist, + unsigned int offset, u32 sync_line, + unsigned int bpl, unsigned int padding, + unsigned int lines, unsigned int lpi) +{ + struct scatterlist *sg; + unsigned int line,todo,sol; + + /* sync instruction */ + if (sync_line != NO_SYNC_LINE) + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + /* scan lines */ + sg = sglist; + for (line = 0; line < lines; line++) { + while (offset && offset >= sg_dma_len(sg)) { + offset -= sg_dma_len(sg); + sg++; + } + if (lpi && line>0 && !(line % lpi)) + sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC; + else + sol = RISC_SOL; + if (bpl <= sg_dma_len(sg)-offset) { + /* fits into current chunk */ + *(rp++)=cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl); + *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); + offset+=bpl; + } else { + /* scanline needs to be split */ + todo = bpl; + *(rp++)=cpu_to_le32(RISC_WRITE|sol| + (sg_dma_len(sg)-offset)); + *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); + todo -= (sg_dma_len(sg)-offset); + offset = 0; + sg++; + while (todo > sg_dma_len(sg)) { + *(rp++)=cpu_to_le32(RISC_WRITE| + sg_dma_len(sg)); + *(rp++)=cpu_to_le32(sg_dma_address(sg)); + todo -= sg_dma_len(sg); + sg++; + } + *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo); + *(rp++)=cpu_to_le32(sg_dma_address(sg)); + offset += todo; + } + offset += padding; + } + + return rp; +} + +int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int top_offset, unsigned int bottom_offset, + unsigned int bpl, unsigned int padding, unsigned int lines) +{ + u32 instructions,fields; + __le32 *rp; + int rc; + + fields = 0; + if (UNSET != top_offset) + fields++; + if (UNSET != bottom_offset) + fields++; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines); + instructions += 2; + if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + if (UNSET != top_offset) + rp = cx88_risc_field(rp, sglist, top_offset, 0, + bpl, padding, lines, 0); + if (UNSET != bottom_offset) + rp = cx88_risc_field(rp, sglist, bottom_offset, 0x200, + bpl, padding, lines, 0); + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); + return 0; +} + +int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, unsigned int bpl, + unsigned int lines, unsigned int lpi) +{ + u32 instructions; + __le32 *rp; + int rc; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Here + there is no padding and no sync. First DMA region may be smaller + than PAGE_SIZE */ + instructions = 1 + (bpl * lines) / PAGE_SIZE + lines; + instructions += 1; + if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + rp = cx88_risc_field(rp, sglist, 0, NO_SYNC_LINE, bpl, 0, lines, lpi); + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); + return 0; +} + +int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value) +{ + __le32 *rp; + int rc; + + if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + *(rp++) = cpu_to_le32(RISC_WRITECR | RISC_IRQ2 | RISC_IMM); + *(rp++) = cpu_to_le32(reg); + *(rp++) = cpu_to_le32(value); + *(rp++) = cpu_to_le32(mask); + *(rp++) = cpu_to_le32(RISC_JUMP); + *(rp++) = cpu_to_le32(risc->dma); + return 0; +} + +void +cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf) +{ + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + BUG_ON(in_interrupt()); + videobuf_waiton(q, &buf->vb, 0, 0); + videobuf_dma_unmap(q->dev, dma); + videobuf_dma_free(dma); + btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +/* ------------------------------------------------------------------ */ +/* our SRAM memory layout */ + +/* we are going to put all thr risc programs into host memory, so we + * can use the whole SDRAM for the DMA fifos. To simplify things, we + * use a static memory layout. That surely will waste memory in case + * we don't use all DMA channels at the same time (which will be the + * case most of the time). But that still gives us enough FIFO space + * to be able to deal with insane long pci latencies ... + * + * FIFO space allocations: + * channel 21 (y video) - 10.0k + * channel 22 (u video) - 2.0k + * channel 23 (v video) - 2.0k + * channel 24 (vbi) - 4.0k + * channels 25+26 (audio) - 4.0k + * channel 28 (mpeg) - 4.0k + * channel 27 (audio rds)- 3.0k + * TOTAL = 29.0k + * + * Every channel has 160 bytes control data (64 bytes instruction + * queue and 6 CDT entries), which is close to 2k total. + * + * Address layout: + * 0x0000 - 0x03ff CMDs / reserved + * 0x0400 - 0x0bff instruction queues + CDs + * 0x0c00 - FIFOs + */ + +const struct sram_channel cx88_sram_channels[] = { + [SRAM_CH21] = { + .name = "video y / packed", + .cmds_start = 0x180040, + .ctrl_start = 0x180400, + .cdt = 0x180400 + 64, + .fifo_start = 0x180c00, + .fifo_size = 0x002800, + .ptr1_reg = MO_DMA21_PTR1, + .ptr2_reg = MO_DMA21_PTR2, + .cnt1_reg = MO_DMA21_CNT1, + .cnt2_reg = MO_DMA21_CNT2, + }, + [SRAM_CH22] = { + .name = "video u", + .cmds_start = 0x180080, + .ctrl_start = 0x1804a0, + .cdt = 0x1804a0 + 64, + .fifo_start = 0x183400, + .fifo_size = 0x000800, + .ptr1_reg = MO_DMA22_PTR1, + .ptr2_reg = MO_DMA22_PTR2, + .cnt1_reg = MO_DMA22_CNT1, + .cnt2_reg = MO_DMA22_CNT2, + }, + [SRAM_CH23] = { + .name = "video v", + .cmds_start = 0x1800c0, + .ctrl_start = 0x180540, + .cdt = 0x180540 + 64, + .fifo_start = 0x183c00, + .fifo_size = 0x000800, + .ptr1_reg = MO_DMA23_PTR1, + .ptr2_reg = MO_DMA23_PTR2, + .cnt1_reg = MO_DMA23_CNT1, + .cnt2_reg = MO_DMA23_CNT2, + }, + [SRAM_CH24] = { + .name = "vbi", + .cmds_start = 0x180100, + .ctrl_start = 0x1805e0, + .cdt = 0x1805e0 + 64, + .fifo_start = 0x184400, + .fifo_size = 0x001000, + .ptr1_reg = MO_DMA24_PTR1, + .ptr2_reg = MO_DMA24_PTR2, + .cnt1_reg = MO_DMA24_CNT1, + .cnt2_reg = MO_DMA24_CNT2, + }, + [SRAM_CH25] = { + .name = "audio from", + .cmds_start = 0x180140, + .ctrl_start = 0x180680, + .cdt = 0x180680 + 64, + .fifo_start = 0x185400, + .fifo_size = 0x001000, + .ptr1_reg = MO_DMA25_PTR1, + .ptr2_reg = MO_DMA25_PTR2, + .cnt1_reg = MO_DMA25_CNT1, + .cnt2_reg = MO_DMA25_CNT2, + }, + [SRAM_CH26] = { + .name = "audio to", + .cmds_start = 0x180180, + .ctrl_start = 0x180720, + .cdt = 0x180680 + 64, /* same as audio IN */ + .fifo_start = 0x185400, /* same as audio IN */ + .fifo_size = 0x001000, /* same as audio IN */ + .ptr1_reg = MO_DMA26_PTR1, + .ptr2_reg = MO_DMA26_PTR2, + .cnt1_reg = MO_DMA26_CNT1, + .cnt2_reg = MO_DMA26_CNT2, + }, + [SRAM_CH28] = { + .name = "mpeg", + .cmds_start = 0x180200, + .ctrl_start = 0x1807C0, + .cdt = 0x1807C0 + 64, + .fifo_start = 0x186400, + .fifo_size = 0x001000, + .ptr1_reg = MO_DMA28_PTR1, + .ptr2_reg = MO_DMA28_PTR2, + .cnt1_reg = MO_DMA28_CNT1, + .cnt2_reg = MO_DMA28_CNT2, + }, + [SRAM_CH27] = { + .name = "audio rds", + .cmds_start = 0x1801C0, + .ctrl_start = 0x180860, + .cdt = 0x180860 + 64, + .fifo_start = 0x187400, + .fifo_size = 0x000C00, + .ptr1_reg = MO_DMA27_PTR1, + .ptr2_reg = MO_DMA27_PTR2, + .cnt1_reg = MO_DMA27_CNT1, + .cnt2_reg = MO_DMA27_CNT2, + }, +}; + +int cx88_sram_channel_setup(struct cx88_core *core, + const struct sram_channel *ch, + unsigned int bpl, u32 risc) +{ + unsigned int i,lines; + u32 cdt; + + bpl = (bpl + 7) & ~7; /* alignment */ + cdt = ch->cdt; + lines = ch->fifo_size / bpl; + if (lines > 6) + lines = 6; + BUG_ON(lines < 2); + + /* write CDT */ + for (i = 0; i < lines; i++) + cx_write(cdt + 16*i, ch->fifo_start + bpl*i); + + /* write CMDS */ + cx_write(ch->cmds_start + 0, risc); + cx_write(ch->cmds_start + 4, cdt); + cx_write(ch->cmds_start + 8, (lines*16) >> 3); + cx_write(ch->cmds_start + 12, ch->ctrl_start); + cx_write(ch->cmds_start + 16, 64 >> 2); + for (i = 20; i < 64; i += 4) + cx_write(ch->cmds_start + i, 0); + + /* fill registers */ + cx_write(ch->ptr1_reg, ch->fifo_start); + cx_write(ch->ptr2_reg, cdt); + cx_write(ch->cnt1_reg, (bpl >> 3) -1); + cx_write(ch->cnt2_reg, (lines*16) >> 3); + + dprintk(2,"sram setup %s: bpl=%d lines=%d\n", ch->name, bpl, lines); + return 0; +} + +/* ------------------------------------------------------------------ */ +/* debug helper code */ + +static int cx88_risc_decode(u32 risc) +{ + static const char * const instr[16] = { + [ RISC_SYNC >> 28 ] = "sync", + [ RISC_WRITE >> 28 ] = "write", + [ RISC_WRITEC >> 28 ] = "writec", + [ RISC_READ >> 28 ] = "read", + [ RISC_READC >> 28 ] = "readc", + [ RISC_JUMP >> 28 ] = "jump", + [ RISC_SKIP >> 28 ] = "skip", + [ RISC_WRITERM >> 28 ] = "writerm", + [ RISC_WRITECM >> 28 ] = "writecm", + [ RISC_WRITECR >> 28 ] = "writecr", + }; + static int const incr[16] = { + [ RISC_WRITE >> 28 ] = 2, + [ RISC_JUMP >> 28 ] = 2, + [ RISC_WRITERM >> 28 ] = 3, + [ RISC_WRITECM >> 28 ] = 3, + [ RISC_WRITECR >> 28 ] = 4, + }; + static const char * const bits[] = { + "12", "13", "14", "resync", + "cnt0", "cnt1", "18", "19", + "20", "21", "22", "23", + "irq1", "irq2", "eol", "sol", + }; + int i; + + printk("0x%08x [ %s", risc, + instr[risc >> 28] ? instr[risc >> 28] : "INVALID"); + for (i = ARRAY_SIZE(bits)-1; i >= 0; i--) + if (risc & (1 << (i + 12))) + printk(" %s",bits[i]); + printk(" count=%d ]\n", risc & 0xfff); + return incr[risc >> 28] ? incr[risc >> 28] : 1; +} + + +void cx88_sram_channel_dump(struct cx88_core *core, + const struct sram_channel *ch) +{ + static const char * const name[] = { + "initial risc", + "cdt base", + "cdt size", + "iq base", + "iq size", + "risc pc", + "iq wr ptr", + "iq rd ptr", + "cdt current", + "pci target", + "line / byte", + }; + u32 risc; + unsigned int i,j,n; + + printk("%s: %s - dma channel status dump\n", + core->name,ch->name); + for (i = 0; i < ARRAY_SIZE(name); i++) + printk("%s: cmds: %-12s: 0x%08x\n", + core->name,name[i], + cx_read(ch->cmds_start + 4*i)); + for (n = 1, i = 0; i < 4; i++) { + risc = cx_read(ch->cmds_start + 4 * (i+11)); + printk("%s: risc%d: ", core->name, i); + if (--n) + printk("0x%08x [ arg #%d ]\n", risc, n); + else + n = cx88_risc_decode(risc); + } + for (i = 0; i < 16; i += n) { + risc = cx_read(ch->ctrl_start + 4 * i); + printk("%s: iq %x: ", core->name, i); + n = cx88_risc_decode(risc); + for (j = 1; j < n; j++) { + risc = cx_read(ch->ctrl_start + 4 * (i+j)); + printk("%s: iq %x: 0x%08x [ arg #%d ]\n", + core->name, i+j, risc, j); + } + } + + printk("%s: fifo: 0x%08x -> 0x%x\n", + core->name, ch->fifo_start, ch->fifo_start+ch->fifo_size); + printk("%s: ctrl: 0x%08x -> 0x%x\n", + core->name, ch->ctrl_start, ch->ctrl_start+6*16); + printk("%s: ptr1_reg: 0x%08x\n", + core->name,cx_read(ch->ptr1_reg)); + printk("%s: ptr2_reg: 0x%08x\n", + core->name,cx_read(ch->ptr2_reg)); + printk("%s: cnt1_reg: 0x%08x\n", + core->name,cx_read(ch->cnt1_reg)); + printk("%s: cnt2_reg: 0x%08x\n", + core->name,cx_read(ch->cnt2_reg)); +} + +static const char *cx88_pci_irqs[32] = { + "vid", "aud", "ts", "vip", "hst", "5", "6", "tm1", + "src_dma", "dst_dma", "risc_rd_err", "risc_wr_err", + "brdg_err", "src_dma_err", "dst_dma_err", "ipb_dma_err", + "i2c", "i2c_rack", "ir_smp", "gpio0", "gpio1" +}; + +void cx88_print_irqbits(const char *name, const char *tag, const char *strings[], + int len, u32 bits, u32 mask) +{ + unsigned int i; + + printk(KERN_DEBUG "%s: %s [0x%x]", name, tag, bits); + for (i = 0; i < len; i++) { + if (!(bits & (1 << i))) + continue; + if (strings[i]) + printk(" %s", strings[i]); + else + printk(" %d", i); + if (!(mask & (1 << i))) + continue; + printk("*"); + } + printk("\n"); +} + +/* ------------------------------------------------------------------ */ + +int cx88_core_irq(struct cx88_core *core, u32 status) +{ + int handled = 0; + + if (status & PCI_INT_IR_SMPINT) { + cx88_ir_irq(core); + handled++; + } + if (!handled) + cx88_print_irqbits(core->name, "irq pci", + cx88_pci_irqs, ARRAY_SIZE(cx88_pci_irqs), + status, core->pci_irqmask); + return handled; +} + +void cx88_wakeup(struct cx88_core *core, + struct cx88_dmaqueue *q, u32 count) +{ + struct cx88_buffer *buf; + int bc; + + for (bc = 0;; bc++) { + if (list_empty(&q->active)) + break; + buf = list_entry(q->active.next, + struct cx88_buffer, vb.queue); + /* count comes from the hw and is is 16bit wide -- + * this trick handles wrap-arounds correctly for + * up to 32767 buffers in flight... */ + if ((s16) (count - buf->count) < 0) + break; + v4l2_get_timestamp(&buf->vb.ts); + dprintk(2,"[%p/%d] wakeup reg=%d buf=%d\n",buf,buf->vb.i, + count, buf->count); + buf->vb.state = VIDEOBUF_DONE; + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); + } + if (list_empty(&q->active)) { + del_timer(&q->timeout); + } else { + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + } + if (bc != 1) + dprintk(2, "%s: %d buffers handled (should be 1)\n", + __func__, bc); +} + +void cx88_shutdown(struct cx88_core *core) +{ + /* disable RISC controller + IRQs */ + cx_write(MO_DEV_CNTRL2, 0); + + /* stop dma transfers */ + cx_write(MO_VID_DMACNTRL, 0x0); + cx_write(MO_AUD_DMACNTRL, 0x0); + cx_write(MO_TS_DMACNTRL, 0x0); + cx_write(MO_VIP_DMACNTRL, 0x0); + cx_write(MO_GPHST_DMACNTRL, 0x0); + + /* stop interrupts */ + cx_write(MO_PCI_INTMSK, 0x0); + cx_write(MO_VID_INTMSK, 0x0); + cx_write(MO_AUD_INTMSK, 0x0); + cx_write(MO_TS_INTMSK, 0x0); + cx_write(MO_VIP_INTMSK, 0x0); + cx_write(MO_GPHST_INTMSK, 0x0); + + /* stop capturing */ + cx_write(VID_CAPTURE_CONTROL, 0); +} + +int cx88_reset(struct cx88_core *core) +{ + dprintk(1,"%s\n",__func__); + cx88_shutdown(core); + + /* clear irq status */ + cx_write(MO_VID_INTSTAT, 0xFFFFFFFF); // Clear PIV int + cx_write(MO_PCI_INTSTAT, 0xFFFFFFFF); // Clear PCI int + cx_write(MO_INT1_STAT, 0xFFFFFFFF); // Clear RISC int + + /* wait a bit */ + msleep(100); + + /* init sram */ + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH21], 720*4, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH22], 128, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH23], 128, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH24], 128, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH28], 188*4, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH27], 128, 0); + + /* misc init ... */ + cx_write(MO_INPUT_FORMAT, ((1 << 13) | // agc enable + (1 << 12) | // agc gain + (1 << 11) | // adaptibe agc + (0 << 10) | // chroma agc + (0 << 9) | // ckillen + (7))); + + /* setup image format */ + cx_andor(MO_COLOR_CTRL, 0x4000, 0x4000); + + /* setup FIFO Thresholds */ + cx_write(MO_PDMA_STHRSH, 0x0807); + cx_write(MO_PDMA_DTHRSH, 0x0807); + + /* fixes flashing of image */ + cx_write(MO_AGC_SYNC_TIP1, 0x0380000F); + cx_write(MO_AGC_BACK_VBI, 0x00E00555); + + cx_write(MO_VID_INTSTAT, 0xFFFFFFFF); // Clear PIV int + cx_write(MO_PCI_INTSTAT, 0xFFFFFFFF); // Clear PCI int + cx_write(MO_INT1_STAT, 0xFFFFFFFF); // Clear RISC int + + /* Reset on-board parts */ + cx_write(MO_SRST_IO, 0); + msleep(10); + cx_write(MO_SRST_IO, 1); + + return 0; +} + +/* ------------------------------------------------------------------ */ + +static inline unsigned int norm_swidth(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922; +} + +static inline unsigned int norm_hdelay(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 135 : 186; +} + +static inline unsigned int norm_vdelay(v4l2_std_id norm) +{ + return (norm & V4L2_STD_625_50) ? 0x24 : 0x18; +} + +static inline unsigned int norm_fsc8(v4l2_std_id norm) +{ + if (norm & V4L2_STD_PAL_M) + return 28604892; // 3.575611 MHz + + if (norm & (V4L2_STD_PAL_Nc)) + return 28656448; // 3.582056 MHz + + if (norm & V4L2_STD_NTSC) // All NTSC/M and variants + return 28636360; // 3.57954545 MHz +/- 10 Hz + + /* SECAM have also different sub carrier for chroma, + but step_db and step_dr, at cx88_set_tvnorm already handles that. + + The same FSC applies to PAL/BGDKIH, PAL/60, NTSC/4.43 and PAL/N + */ + + return 35468950; // 4.43361875 MHz +/- 5 Hz +} + +static inline unsigned int norm_htotal(v4l2_std_id norm) +{ + + unsigned int fsc4=norm_fsc8(norm)/2; + + /* returns 4*FSC / vtotal / frames per seconds */ + return (norm & V4L2_STD_625_50) ? + ((fsc4+312)/625+12)/25 : + ((fsc4+262)/525*1001+15000)/30000; +} + +static inline unsigned int norm_vbipack(v4l2_std_id norm) +{ + return (norm & V4L2_STD_625_50) ? 511 : 400; +} + +int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int height, + enum v4l2_field field) +{ + unsigned int swidth = norm_swidth(core->tvnorm); + unsigned int sheight = norm_maxh(core->tvnorm); + u32 value; + + dprintk(1,"set_scale: %dx%d [%s%s,%s]\n", width, height, + V4L2_FIELD_HAS_TOP(field) ? "T" : "", + V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "", + v4l2_norm_to_name(core->tvnorm)); + if (!V4L2_FIELD_HAS_BOTH(field)) + height *= 2; + + // recalc H delay and scale registers + value = (width * norm_hdelay(core->tvnorm)) / swidth; + value &= 0x3fe; + cx_write(MO_HDELAY_EVEN, value); + cx_write(MO_HDELAY_ODD, value); + dprintk(1,"set_scale: hdelay 0x%04x (width %d)\n", value,swidth); + + value = (swidth * 4096 / width) - 4096; + cx_write(MO_HSCALE_EVEN, value); + cx_write(MO_HSCALE_ODD, value); + dprintk(1,"set_scale: hscale 0x%04x\n", value); + + cx_write(MO_HACTIVE_EVEN, width); + cx_write(MO_HACTIVE_ODD, width); + dprintk(1,"set_scale: hactive 0x%04x\n", width); + + // recalc V scale Register (delay is constant) + cx_write(MO_VDELAY_EVEN, norm_vdelay(core->tvnorm)); + cx_write(MO_VDELAY_ODD, norm_vdelay(core->tvnorm)); + dprintk(1,"set_scale: vdelay 0x%04x\n", norm_vdelay(core->tvnorm)); + + value = (0x10000 - (sheight * 512 / height - 512)) & 0x1fff; + cx_write(MO_VSCALE_EVEN, value); + cx_write(MO_VSCALE_ODD, value); + dprintk(1,"set_scale: vscale 0x%04x\n", value); + + cx_write(MO_VACTIVE_EVEN, sheight); + cx_write(MO_VACTIVE_ODD, sheight); + dprintk(1,"set_scale: vactive 0x%04x\n", sheight); + + // setup filters + value = 0; + value |= (1 << 19); // CFILT (default) + if (core->tvnorm & V4L2_STD_SECAM) { + value |= (1 << 15); + value |= (1 << 16); + } + if (INPUT(core->input).type == CX88_VMUX_SVIDEO) + value |= (1 << 13) | (1 << 5); + if (V4L2_FIELD_INTERLACED == field) + value |= (1 << 3); // VINT (interlaced vertical scaling) + if (width < 385) + value |= (1 << 0); // 3-tap interpolation + if (width < 193) + value |= (1 << 1); // 5-tap interpolation + if (nocomb) + value |= (3 << 5); // disable comb filter + + cx_andor(MO_FILTER_EVEN, 0x7ffc7f, value); /* preserve PEAKEN, PSEL */ + cx_andor(MO_FILTER_ODD, 0x7ffc7f, value); + dprintk(1,"set_scale: filter 0x%04x\n", value); + + return 0; +} + +static const u32 xtal = 28636363; + +static int set_pll(struct cx88_core *core, int prescale, u32 ofreq) +{ + static const u32 pre[] = { 0, 0, 0, 3, 2, 1 }; + u64 pll; + u32 reg; + int i; + + if (prescale < 2) + prescale = 2; + if (prescale > 5) + prescale = 5; + + pll = ofreq * 8 * prescale * (u64)(1 << 20); + do_div(pll,xtal); + reg = (pll & 0x3ffffff) | (pre[prescale] << 26); + if (((reg >> 20) & 0x3f) < 14) { + printk("%s/0: pll out of range\n",core->name); + return -1; + } + + dprintk(1,"set_pll: MO_PLL_REG 0x%08x [old=0x%08x,freq=%d]\n", + reg, cx_read(MO_PLL_REG), ofreq); + cx_write(MO_PLL_REG, reg); + for (i = 0; i < 100; i++) { + reg = cx_read(MO_DEVICE_STATUS); + if (reg & (1<<2)) { + dprintk(1,"pll locked [pre=%d,ofreq=%d]\n", + prescale,ofreq); + return 0; + } + dprintk(1,"pll not locked yet, waiting ...\n"); + msleep(10); + } + dprintk(1,"pll NOT locked [pre=%d,ofreq=%d]\n",prescale,ofreq); + return -1; +} + +int cx88_start_audio_dma(struct cx88_core *core) +{ + /* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */ + int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4; + + int rds_bpl = cx88_sram_channels[SRAM_CH27].fifo_size/AUD_RDS_LINES; + + /* If downstream RISC is enabled, bail out; ALSA is managing DMA */ + if (cx_read(MO_AUD_DMACNTRL) & 0x10) + return 0; + + /* setup fifo + format */ + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0); + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH27], + rds_bpl, 0); + + cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */ + cx_write(MO_AUDR_LNGTH, rds_bpl); /* fifo bpl size */ + + /* enable Up, Down and Audio RDS fifo */ + cx_write(MO_AUD_DMACNTRL, 0x0007); + + return 0; +} + +int cx88_stop_audio_dma(struct cx88_core *core) +{ + /* If downstream RISC is enabled, bail out; ALSA is managing DMA */ + if (cx_read(MO_AUD_DMACNTRL) & 0x10) + return 0; + + /* stop dma */ + cx_write(MO_AUD_DMACNTRL, 0x0000); + + return 0; +} + +static int set_tvaudio(struct cx88_core *core) +{ + v4l2_std_id norm = core->tvnorm; + + if (CX88_VMUX_TELEVISION != INPUT(core->input).type && + CX88_VMUX_CABLE != INPUT(core->input).type) + return 0; + + if (V4L2_STD_PAL_BG & norm) { + core->tvaudio = WW_BG; + + } else if (V4L2_STD_PAL_DK & norm) { + core->tvaudio = WW_DK; + + } else if (V4L2_STD_PAL_I & norm) { + core->tvaudio = WW_I; + + } else if (V4L2_STD_SECAM_L & norm) { + core->tvaudio = WW_L; + + } else if ((V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H) & norm) { + core->tvaudio = WW_BG; + + } else if (V4L2_STD_SECAM_DK & norm) { + core->tvaudio = WW_DK; + + } else if ((V4L2_STD_NTSC_M & norm) || + (V4L2_STD_PAL_M & norm)) { + core->tvaudio = WW_BTSC; + + } else if (V4L2_STD_NTSC_M_JP & norm) { + core->tvaudio = WW_EIAJ; + + } else { + printk("%s/0: tvaudio support needs work for this tv norm [%s], sorry\n", + core->name, v4l2_norm_to_name(core->tvnorm)); + core->tvaudio = WW_NONE; + return 0; + } + + cx_andor(MO_AFECFG_IO, 0x1f, 0x0); + cx88_set_tvaudio(core); + /* cx88_set_stereo(dev,V4L2_TUNER_MODE_STEREO); */ + +/* + This should be needed only on cx88-alsa. It seems that some cx88 chips have + bugs and does require DMA enabled for it to work. + */ + cx88_start_audio_dma(core); + return 0; +} + + + +int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm) +{ + u32 fsc8; + u32 adc_clock; + u32 vdec_clock; + u32 step_db,step_dr; + u64 tmp64; + u32 bdelay,agcdelay,htotal; + u32 cxiformat, cxoformat; + + core->tvnorm = norm; + fsc8 = norm_fsc8(norm); + adc_clock = xtal; + vdec_clock = fsc8; + step_db = fsc8; + step_dr = fsc8; + + if (norm & V4L2_STD_NTSC_M_JP) { + cxiformat = VideoFormatNTSCJapan; + cxoformat = 0x181f0008; + } else if (norm & V4L2_STD_NTSC_443) { + cxiformat = VideoFormatNTSC443; + cxoformat = 0x181f0008; + } else if (norm & V4L2_STD_PAL_M) { + cxiformat = VideoFormatPALM; + cxoformat = 0x1c1f0008; + } else if (norm & V4L2_STD_PAL_N) { + cxiformat = VideoFormatPALN; + cxoformat = 0x1c1f0008; + } else if (norm & V4L2_STD_PAL_Nc) { + cxiformat = VideoFormatPALNC; + cxoformat = 0x1c1f0008; + } else if (norm & V4L2_STD_PAL_60) { + cxiformat = VideoFormatPAL60; + cxoformat = 0x181f0008; + } else if (norm & V4L2_STD_NTSC) { + cxiformat = VideoFormatNTSC; + cxoformat = 0x181f0008; + } else if (norm & V4L2_STD_SECAM) { + step_db = 4250000 * 8; + step_dr = 4406250 * 8; + + cxiformat = VideoFormatSECAM; + cxoformat = 0x181f0008; + } else { /* PAL */ + cxiformat = VideoFormatPAL; + cxoformat = 0x181f0008; + } + + dprintk(1,"set_tvnorm: \"%s\" fsc8=%d adc=%d vdec=%d db/dr=%d/%d\n", + v4l2_norm_to_name(core->tvnorm), fsc8, adc_clock, vdec_clock, + step_db, step_dr); + set_pll(core,2,vdec_clock); + + dprintk(1,"set_tvnorm: MO_INPUT_FORMAT 0x%08x [old=0x%08x]\n", + cxiformat, cx_read(MO_INPUT_FORMAT) & 0x0f); + /* Chroma AGC must be disabled if SECAM is used, we enable it + by default on PAL and NTSC */ + cx_andor(MO_INPUT_FORMAT, 0x40f, + norm & V4L2_STD_SECAM ? cxiformat : cxiformat | 0x400); + + // FIXME: as-is from DScaler + dprintk(1,"set_tvnorm: MO_OUTPUT_FORMAT 0x%08x [old=0x%08x]\n", + cxoformat, cx_read(MO_OUTPUT_FORMAT)); + cx_write(MO_OUTPUT_FORMAT, cxoformat); + + // MO_SCONV_REG = adc clock / video dec clock * 2^17 + tmp64 = adc_clock * (u64)(1 << 17); + do_div(tmp64, vdec_clock); + dprintk(1,"set_tvnorm: MO_SCONV_REG 0x%08x [old=0x%08x]\n", + (u32)tmp64, cx_read(MO_SCONV_REG)); + cx_write(MO_SCONV_REG, (u32)tmp64); + + // MO_SUB_STEP = 8 * fsc / video dec clock * 2^22 + tmp64 = step_db * (u64)(1 << 22); + do_div(tmp64, vdec_clock); + dprintk(1,"set_tvnorm: MO_SUB_STEP 0x%08x [old=0x%08x]\n", + (u32)tmp64, cx_read(MO_SUB_STEP)); + cx_write(MO_SUB_STEP, (u32)tmp64); + + // MO_SUB_STEP_DR = 8 * 4406250 / video dec clock * 2^22 + tmp64 = step_dr * (u64)(1 << 22); + do_div(tmp64, vdec_clock); + dprintk(1,"set_tvnorm: MO_SUB_STEP_DR 0x%08x [old=0x%08x]\n", + (u32)tmp64, cx_read(MO_SUB_STEP_DR)); + cx_write(MO_SUB_STEP_DR, (u32)tmp64); + + // bdelay + agcdelay + bdelay = vdec_clock * 65 / 20000000 + 21; + agcdelay = vdec_clock * 68 / 20000000 + 15; + dprintk(1,"set_tvnorm: MO_AGC_BURST 0x%08x [old=0x%08x,bdelay=%d,agcdelay=%d]\n", + (bdelay << 8) | agcdelay, cx_read(MO_AGC_BURST), bdelay, agcdelay); + cx_write(MO_AGC_BURST, (bdelay << 8) | agcdelay); + + // htotal + tmp64 = norm_htotal(norm) * (u64)vdec_clock; + do_div(tmp64, fsc8); + htotal = (u32)tmp64; + dprintk(1,"set_tvnorm: MO_HTOTAL 0x%08x [old=0x%08x,htotal=%d]\n", + htotal, cx_read(MO_HTOTAL), (u32)tmp64); + cx_andor(MO_HTOTAL, 0x07ff, htotal); + + // vbi stuff, set vbi offset to 10 (for 20 Clk*2 pixels), this makes + // the effective vbi offset ~244 samples, the same as the Bt8x8 + cx_write(MO_VBI_PACKET, (10<<11) | norm_vbipack(norm)); + + // this is needed as well to set all tvnorm parameter + cx88_set_scale(core, 320, 240, V4L2_FIELD_INTERLACED); + + // audio + set_tvaudio(core); + + // tell i2c chips + call_all(core, core, s_std, norm); + + /* The chroma_agc control should be inaccessible if the video format is SECAM */ + v4l2_ctrl_grab(core->chroma_agc, cxiformat == VideoFormatSECAM); + + // done + return 0; +} + +/* ------------------------------------------------------------------ */ + +struct video_device *cx88_vdev_init(struct cx88_core *core, + struct pci_dev *pci, + const struct video_device *template_, + const char *type) +{ + struct video_device *vfd; + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template_; + vfd->v4l2_dev = &core->v4l2_dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", + core->name, type, core->board.name); + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + return vfd; +} + +struct cx88_core* cx88_core_get(struct pci_dev *pci) +{ + struct cx88_core *core; + + mutex_lock(&devlist); + list_for_each_entry(core, &cx88_devlist, devlist) { + if (pci->bus->number != core->pci_bus) + continue; + if (PCI_SLOT(pci->devfn) != core->pci_slot) + continue; + + if (0 != cx88_get_resources(core, pci)) { + mutex_unlock(&devlist); + return NULL; + } + atomic_inc(&core->refcount); + mutex_unlock(&devlist); + return core; + } + + core = cx88_core_create(pci, cx88_devcount); + if (NULL != core) { + cx88_devcount++; + list_add_tail(&core->devlist, &cx88_devlist); + } + + mutex_unlock(&devlist); + return core; +} + +void cx88_core_put(struct cx88_core *core, struct pci_dev *pci) +{ + release_mem_region(pci_resource_start(pci,0), + pci_resource_len(pci,0)); + + if (!atomic_dec_and_test(&core->refcount)) + return; + + mutex_lock(&devlist); + cx88_ir_fini(core); + if (0 == core->i2c_rc) { + if (core->i2c_rtc) + i2c_unregister_device(core->i2c_rtc); + i2c_del_adapter(&core->i2c_adap); + } + list_del(&core->devlist); + iounmap(core->lmmio); + cx88_devcount--; + mutex_unlock(&devlist); + v4l2_ctrl_handler_free(&core->video_hdl); + v4l2_ctrl_handler_free(&core->audio_hdl); + v4l2_device_unregister(&core->v4l2_dev); + kfree(core); +} + +/* ------------------------------------------------------------------ */ + +EXPORT_SYMBOL(cx88_print_irqbits); + +EXPORT_SYMBOL(cx88_core_irq); +EXPORT_SYMBOL(cx88_wakeup); +EXPORT_SYMBOL(cx88_reset); +EXPORT_SYMBOL(cx88_shutdown); + +EXPORT_SYMBOL(cx88_risc_buffer); +EXPORT_SYMBOL(cx88_risc_databuffer); +EXPORT_SYMBOL(cx88_risc_stopper); +EXPORT_SYMBOL(cx88_free_buffer); + +EXPORT_SYMBOL(cx88_sram_channels); +EXPORT_SYMBOL(cx88_sram_channel_setup); +EXPORT_SYMBOL(cx88_sram_channel_dump); + +EXPORT_SYMBOL(cx88_set_tvnorm); +EXPORT_SYMBOL(cx88_set_scale); + +EXPORT_SYMBOL(cx88_vdev_init); +EXPORT_SYMBOL(cx88_core_get); +EXPORT_SYMBOL(cx88_core_put); + +EXPORT_SYMBOL(cx88_ir_start); +EXPORT_SYMBOL(cx88_ir_stop); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off + */ diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c new file mode 100644 index 00000000..a9907265 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-dsp.c @@ -0,0 +1,322 @@ +/* + * + * Stereo and SAP detection for cx88 + * + * Copyright (c) 2009 Marton Balint + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "cx88.h" +#include "cx88-reg.h" + +#define INT_PI ((s32)(3.141592653589 * 32768.0)) + +#define compat_remainder(a, b) \ + ((float)(((s32)((a)*100))%((s32)((b)*100)))/100.0) + +#define baseband_freq(carrier, srate, tone) ((s32)( \ + (compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI)) + +/* We calculate the baseband frequencies of the carrier and the pilot tones + * based on the the sampling rate of the audio rds fifo. */ + +#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0) +#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1) +#define FREQ_A2_STEREO baseband_freq(54687.5, 2689.36, 117.5) + +/* The frequencies below are from the reference driver. They probably need + * further adjustments, because they are not tested at all. You may even need + * to play a bit with the registers of the chip to select the proper signal + * for the input of the audio rds fifo, and measure it's sampling rate to + * calculate the proper baseband frequencies... */ + +#define FREQ_A2M_CARRIER ((s32)(2.114516 * 32768.0)) +#define FREQ_A2M_DUAL ((s32)(2.754916 * 32768.0)) +#define FREQ_A2M_STEREO ((s32)(2.462326 * 32768.0)) + +#define FREQ_EIAJ_CARRIER ((s32)(1.963495 * 32768.0)) /* 5pi/8 */ +#define FREQ_EIAJ_DUAL ((s32)(2.562118 * 32768.0)) +#define FREQ_EIAJ_STEREO ((s32)(2.601053 * 32768.0)) + +#define FREQ_BTSC_DUAL ((s32)(1.963495 * 32768.0)) /* 5pi/8 */ +#define FREQ_BTSC_DUAL_REF ((s32)(1.374446 * 32768.0)) /* 7pi/16 */ + +#define FREQ_BTSC_SAP ((s32)(2.471532 * 32768.0)) +#define FREQ_BTSC_SAP_REF ((s32)(1.730072 * 32768.0)) + +/* The spectrum of the signal should be empty between these frequencies. */ +#define FREQ_NOISE_START ((s32)(0.100000 * 32768.0)) +#define FREQ_NOISE_END ((s32)(1.200000 * 32768.0)) + +static unsigned int dsp_debug; +module_param(dsp_debug, int, 0644); +MODULE_PARM_DESC(dsp_debug, "enable audio dsp debug messages"); + +#define dprintk(level, fmt, arg...) if (dsp_debug >= level) \ + printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg) + +static s32 int_cos(u32 x) +{ + u32 t2, t4, t6, t8; + s32 ret; + u16 period = x / INT_PI; + if (period % 2) + return -int_cos(x - INT_PI); + x = x % INT_PI; + if (x > INT_PI/2) + return -int_cos(INT_PI/2 - (x % (INT_PI/2))); + /* Now x is between 0 and INT_PI/2. + * To calculate cos(x) we use it's Taylor polinom. */ + t2 = x*x/32768/2; + t4 = t2*x/32768*x/32768/3/4; + t6 = t4*x/32768*x/32768/5/6; + t8 = t6*x/32768*x/32768/7/8; + ret = 32768-t2+t4-t6+t8; + return ret; +} + +static u32 int_goertzel(s16 x[], u32 N, u32 freq) +{ + /* We use the Goertzel algorithm to determine the power of the + * given frequency in the signal */ + s32 s_prev = 0; + s32 s_prev2 = 0; + s32 coeff = 2*int_cos(freq); + u32 i; + + u64 tmp; + u32 divisor; + + for (i = 0; i < N; i++) { + s32 s = x[i] + ((s64)coeff*s_prev/32768) - s_prev2; + s_prev2 = s_prev; + s_prev = s; + } + + tmp = (s64)s_prev2 * s_prev2 + (s64)s_prev * s_prev - + (s64)coeff * s_prev2 * s_prev / 32768; + + /* XXX: N must be low enough so that N*N fits in s32. + * Else we need two divisions. */ + divisor = N * N; + do_div(tmp, divisor); + + return (u32) tmp; +} + +static u32 freq_magnitude(s16 x[], u32 N, u32 freq) +{ + u32 sum = int_goertzel(x, N, freq); + return (u32)int_sqrt(sum); +} + +static u32 noise_magnitude(s16 x[], u32 N, u32 freq_start, u32 freq_end) +{ + int i; + u32 sum = 0; + u32 freq_step; + int samples = 5; + + if (N > 192) { + /* The last 192 samples are enough for noise detection */ + x += (N-192); + N = 192; + } + + freq_step = (freq_end - freq_start) / (samples - 1); + + for (i = 0; i < samples; i++) { + sum += int_goertzel(x, N, freq_start); + freq_start += freq_step; + } + + return (u32)int_sqrt(sum / samples); +} + +static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N) +{ + s32 carrier, stereo, dual, noise; + s32 carrier_freq, stereo_freq, dual_freq; + s32 ret; + + switch (core->tvaudio) { + case WW_BG: + case WW_DK: + carrier_freq = FREQ_A2_CARRIER; + stereo_freq = FREQ_A2_STEREO; + dual_freq = FREQ_A2_DUAL; + break; + case WW_M: + carrier_freq = FREQ_A2M_CARRIER; + stereo_freq = FREQ_A2M_STEREO; + dual_freq = FREQ_A2M_DUAL; + break; + case WW_EIAJ: + carrier_freq = FREQ_EIAJ_CARRIER; + stereo_freq = FREQ_EIAJ_STEREO; + dual_freq = FREQ_EIAJ_DUAL; + break; + default: + printk(KERN_WARNING "%s/0: unsupported audio mode %d for %s\n", + core->name, core->tvaudio, __func__); + return UNSET; + } + + carrier = freq_magnitude(x, N, carrier_freq); + stereo = freq_magnitude(x, N, stereo_freq); + dual = freq_magnitude(x, N, dual_freq); + noise = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END); + + dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, " + "noise=%d\n", carrier, stereo, dual, noise); + + if (stereo > dual) + ret = V4L2_TUNER_SUB_STEREO; + else + ret = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + + if (core->tvaudio == WW_EIAJ) { + /* EIAJ checks may need adjustments */ + if ((carrier > max(stereo, dual)*2) && + (carrier < max(stereo, dual)*6) && + (carrier > 20 && carrier < 200) && + (max(stereo, dual) > min(stereo, dual))) { + /* For EIAJ the carrier is always present, + so we probably don't need noise detection */ + return ret; + } + } else { + if ((carrier > max(stereo, dual)*2) && + (carrier < max(stereo, dual)*8) && + (carrier > 20 && carrier < 200) && + (noise < 10) && + (max(stereo, dual) > min(stereo, dual)*2)) { + return ret; + } + } + return V4L2_TUNER_SUB_MONO; +} + +static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N) +{ + s32 sap_ref = freq_magnitude(x, N, FREQ_BTSC_SAP_REF); + s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP); + s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF); + s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL); + dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d" + "\n", dual_ref, dual, sap_ref, sap); + /* FIXME: Currently not supported */ + return UNSET; +} + +static s16 *read_rds_samples(struct cx88_core *core, u32 *N) +{ + const struct sram_channel *srch = &cx88_sram_channels[SRAM_CH27]; + s16 *samples; + + unsigned int i; + unsigned int bpl = srch->fifo_size/AUD_RDS_LINES; + unsigned int spl = bpl/4; + unsigned int sample_count = spl*(AUD_RDS_LINES-1); + + u32 current_address = cx_read(srch->ptr1_reg); + u32 offset = (current_address - srch->fifo_start + bpl); + + dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), " + "sample_count=%d, aud_intstat=%08x\n", current_address, + current_address - srch->fifo_start, sample_count, + cx_read(MO_AUD_INTSTAT)); + + samples = kmalloc(sizeof(s16)*sample_count, GFP_KERNEL); + if (!samples) + return NULL; + + *N = sample_count; + + for (i = 0; i < sample_count; i++) { + offset = offset % (AUD_RDS_LINES*bpl); + samples[i] = cx_read(srch->fifo_start + offset); + offset += 4; + } + + if (dsp_debug >= 2) { + dprintk(2, "RDS samples dump: "); + for (i = 0; i < sample_count; i++) + printk("%hd ", samples[i]); + printk(".\n"); + } + + return samples; +} + +s32 cx88_dsp_detect_stereo_sap(struct cx88_core *core) +{ + s16 *samples; + u32 N = 0; + s32 ret = UNSET; + + /* If audio RDS fifo is disabled, we can't read the samples */ + if (!(cx_read(MO_AUD_DMACNTRL) & 0x04)) + return ret; + if (!(cx_read(AUD_CTL) & EN_FMRADIO_EN_RDS)) + return ret; + + /* Wait at least 500 ms after an audio standard change */ + if (time_before(jiffies, core->last_change + msecs_to_jiffies(500))) + return ret; + + samples = read_rds_samples(core, &N); + + if (!samples) + return ret; + + switch (core->tvaudio) { + case WW_BG: + case WW_DK: + case WW_EIAJ: + case WW_M: + ret = detect_a2_a2m_eiaj(core, samples, N); + break; + case WW_BTSC: + ret = detect_btsc(core, samples, N); + break; + case WW_NONE: + case WW_I: + case WW_L: + case WW_I2SPT: + case WW_FM: + case WW_I2SADC: + break; + } + + kfree(samples); + + if (UNSET != ret) + dprintk(1, "stereo/sap detection result:%s%s%s\n", + (ret & V4L2_TUNER_SUB_MONO) ? " mono" : "", + (ret & V4L2_TUNER_SUB_STEREO) ? " stereo" : "", + (ret & V4L2_TUNER_SUB_LANG2) ? " dual" : ""); + + return ret; +} +EXPORT_SYMBOL(cx88_dsp_detect_stereo_sap); + diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c new file mode 100644 index 00000000..053ed1ba --- /dev/null +++ b/drivers/media/pci/cx88/cx88-dvb.c @@ -0,0 +1,1795 @@ +/* + * + * device driver for Conexant 2388x based TV cards + * MPEG Transport Stream (DVB) routines + * + * (c) 2004, 2005 Chris Pascoe + * (c) 2004 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "cx88.h" +#include "dvb-pll.h" +#include + +#include "mt352.h" +#include "mt352_priv.h" +#include "cx88-vp3054-i2c.h" +#include "zl10353.h" +#include "cx22702.h" +#include "or51132.h" +#include "lgdt330x.h" +#include "s5h1409.h" +#include "xc4000.h" +#include "xc5000.h" +#include "nxt200x.h" +#include "cx24123.h" +#include "isl6421.h" +#include "tuner-simple.h" +#include "tda9887.h" +#include "s5h1411.h" +#include "stv0299.h" +#include "z0194a.h" +#include "stv0288.h" +#include "stb6000.h" +#include "cx24116.h" +#include "stv0900.h" +#include "stb6100.h" +#include "stb6100_proc.h" +#include "mb86a16.h" +#include "ts2020.h" +#include "ds3000.h" + +MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); +MODULE_AUTHOR("Chris Pascoe "); +MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"enable debug messages [dvb]"); + +static unsigned int dvb_buf_tscnt = 32; +module_param(dvb_buf_tscnt, int, 0644); +MODULE_PARM_DESC(dvb_buf_tscnt, "DVB Buffer TS count [dvb]"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define dprintk(level,fmt, arg...) if (debug >= level) \ + printk(KERN_DEBUG "%s/2-dvb: " fmt, core->name, ## arg) + +/* ------------------------------------------------------------------ */ + +static int dvb_buf_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx8802_dev *dev = q->priv_data; + + dev->ts_packet_size = 188 * 4; + dev->ts_packet_count = dvb_buf_tscnt; + + *size = dev->ts_packet_size * dev->ts_packet_count; + *count = dvb_buf_tscnt; + return 0; +} + +static int dvb_buf_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct cx8802_dev *dev = q->priv_data; + return cx8802_buf_prepare(q, dev, (struct cx88_buffer*)vb,field); +} + +static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx8802_dev *dev = q->priv_data; + cx8802_buf_queue(dev, (struct cx88_buffer*)vb); +} + +static void dvb_buf_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + cx88_free_buffer(q, (struct cx88_buffer*)vb); +} + +static const struct videobuf_queue_ops dvb_qops = { + .buf_setup = dvb_buf_setup, + .buf_prepare = dvb_buf_prepare, + .buf_queue = dvb_buf_queue, + .buf_release = dvb_buf_release, +}; + +/* ------------------------------------------------------------------ */ + +static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx8802_driver *drv = NULL; + int ret = 0; + int fe_id; + + fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe); + if (!fe_id) { + printk(KERN_ERR "%s() No frontend found\n", __func__); + return -EINVAL; + } + + mutex_lock(&dev->core->lock); + drv = cx8802_get_driver(dev, CX88_MPEG_DVB); + if (drv) { + if (acquire){ + dev->frontends.active_fe_id = fe_id; + ret = drv->request_acquire(drv); + } else { + ret = drv->request_release(drv); + dev->frontends.active_fe_id = 0; + } + } + mutex_unlock(&dev->core->lock); + + return ret; +} + +static void cx88_dvb_gate_ctrl(struct cx88_core *core, int open) +{ + struct videobuf_dvb_frontends *f; + struct videobuf_dvb_frontend *fe; + + if (!core->dvbdev) + return; + + f = &core->dvbdev->frontends; + + if (!f) + return; + + if (f->gate <= 1) /* undefined or fe0 */ + fe = videobuf_dvb_get_frontend(f, 1); + else + fe = videobuf_dvb_get_frontend(f, f->gate); + + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); +} + +/* ------------------------------------------------------------------ */ + +static int dvico_fusionhdtv_demod_init(struct dvb_frontend* fe) +{ + static const u8 clock_config [] = { CLOCK_CTL, 0x38, 0x39 }; + static const u8 reset [] = { RESET, 0x80 }; + static const u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static const u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 }; + static const u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + return 0; +} + +static int dvico_dual_demod_init(struct dvb_frontend *fe) +{ + static const u8 clock_config [] = { CLOCK_CTL, 0x38, 0x38 }; + static const u8 reset [] = { RESET, 0x80 }; + static const u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static const u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static const u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +static int dntv_live_dvbt_demod_init(struct dvb_frontend* fe) +{ + static const u8 clock_config [] = { 0x89, 0x38, 0x39 }; + static const u8 reset [] = { 0x50, 0x80 }; + static const u8 adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static const u8 agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF, + 0x00, 0xFF, 0x00, 0x40, 0x40 }; + static const u8 dntv_extra[] = { 0xB5, 0x7A }; + static const u8 capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(2000); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + udelay(2000); + mt352_write(fe, dntv_extra, sizeof(dntv_extra)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +static const struct mt352_config dvico_fusionhdtv = { + .demod_address = 0x0f, + .demod_init = dvico_fusionhdtv_demod_init, +}; + +static const struct mt352_config dntv_live_dvbt_config = { + .demod_address = 0x0f, + .demod_init = dntv_live_dvbt_demod_init, +}; + +static const struct mt352_config dvico_fusionhdtv_dual = { + .demod_address = 0x0f, + .demod_init = dvico_dual_demod_init, +}; + +static const struct zl10353_config cx88_terratec_cinergy_ht_pci_mkii_config = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .if2 = 45600, +}; + +static struct mb86a16_config twinhan_vp1027 = { + .demod_address = 0x08, +}; + +#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054) +static int dntv_live_dvbt_pro_demod_init(struct dvb_frontend* fe) +{ + static const u8 clock_config [] = { 0x89, 0x38, 0x38 }; + static const u8 reset [] = { 0x50, 0x80 }; + static const u8 adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static const u8 agc_cfg [] = { 0x67, 0x10, 0x20, 0x00, 0xFF, 0xFF, + 0x00, 0xFF, 0x00, 0x40, 0x40 }; + static const u8 dntv_extra[] = { 0xB5, 0x7A }; + static const u8 capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(2000); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + udelay(2000); + mt352_write(fe, dntv_extra, sizeof(dntv_extra)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +static const struct mt352_config dntv_live_dvbt_pro_config = { + .demod_address = 0x0f, + .no_tuner = 1, + .demod_init = dntv_live_dvbt_pro_demod_init, +}; +#endif + +static const struct zl10353_config dvico_fusionhdtv_hybrid = { + .demod_address = 0x0f, + .no_tuner = 1, +}; + +static const struct zl10353_config dvico_fusionhdtv_xc3028 = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, +}; + +static const struct mt352_config dvico_fusionhdtv_mt352_xc3028 = { + .demod_address = 0x0f, + .if2 = 4560, + .no_tuner = 1, + .demod_init = dvico_fusionhdtv_demod_init, +}; + +static const struct zl10353_config dvico_fusionhdtv_plus_v1_1 = { + .demod_address = 0x0f, +}; + +static const struct cx22702_config connexant_refboard_config = { + .demod_address = 0x43, + .output_mode = CX22702_SERIAL_OUTPUT, +}; + +static const struct cx22702_config hauppauge_hvr_config = { + .demod_address = 0x63, + .output_mode = CX22702_SERIAL_OUTPUT, +}; + +static int or51132_set_ts_param(struct dvb_frontend* fe, int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; + return 0; +} + +static const struct or51132_config pchdtv_hd3000 = { + .demod_address = 0x15, + .set_ts_params = or51132_set_ts_param, +}; + +static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + dprintk(1, "%s: index = %d\n", __func__, index); + if (index == 0) + cx_clear(MO_GP0_IO, 8); + else + cx_set(MO_GP0_IO, 8); + return 0; +} + +static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + if (is_punctured) + dev->ts_gen_cntrl |= 0x04; + else + dev->ts_gen_cntrl &= ~0x04; + return 0; +} + +static struct lgdt330x_config fusionhdtv_3_gold = { + .demod_address = 0x0e, + .demod_chip = LGDT3302, + .serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */ + .set_ts_params = lgdt330x_set_ts_param, +}; + +static const struct lgdt330x_config fusionhdtv_5_gold = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ + .set_ts_params = lgdt330x_set_ts_param, +}; + +static const struct lgdt330x_config pchdtv_hd5500 = { + .demod_address = 0x59, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ + .set_ts_params = lgdt330x_set_ts_param, +}; + +static int nxt200x_set_ts_param(struct dvb_frontend* fe, int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; + return 0; +} + +static const struct nxt200x_config ati_hdtvwonder = { + .demod_address = 0x0a, + .set_ts_params = nxt200x_set_ts_param, +}; + +static int cx24123_set_ts_param(struct dvb_frontend* fe, + int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + dev->ts_gen_cntrl = 0x02; + return 0; +} + +static int kworld_dvbs_100_set_voltage(struct dvb_frontend* fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + if (voltage == SEC_VOLTAGE_OFF) + cx_write(MO_GP0_IO, 0x000006fb); + else + cx_write(MO_GP0_IO, 0x000006f9); + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + +static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + if (voltage == SEC_VOLTAGE_OFF) { + dprintk(1,"LNB Voltage OFF\n"); + cx_write(MO_GP0_IO, 0x0000efff); + } + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + +static int tevii_dvbs_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + cx_set(MO_GP0_IO, 0x6040); + switch (voltage) { + case SEC_VOLTAGE_13: + cx_clear(MO_GP0_IO, 0x20); + break; + case SEC_VOLTAGE_18: + cx_set(MO_GP0_IO, 0x20); + break; + case SEC_VOLTAGE_OFF: + cx_clear(MO_GP0_IO, 0x20); + break; + } + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + +static int vp1027_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + switch (voltage) { + case SEC_VOLTAGE_13: + dprintk(1, "LNB SEC Voltage=13\n"); + cx_write(MO_GP0_IO, 0x00001220); + break; + case SEC_VOLTAGE_18: + dprintk(1, "LNB SEC Voltage=18\n"); + cx_write(MO_GP0_IO, 0x00001222); + break; + case SEC_VOLTAGE_OFF: + dprintk(1, "LNB Voltage OFF\n"); + cx_write(MO_GP0_IO, 0x00001230); + break; + } + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + +static const struct cx24123_config geniatech_dvbs_config = { + .demod_address = 0x55, + .set_ts_params = cx24123_set_ts_param, +}; + +static const struct cx24123_config hauppauge_novas_config = { + .demod_address = 0x55, + .set_ts_params = cx24123_set_ts_param, +}; + +static const struct cx24123_config kworld_dvbs_100_config = { + .demod_address = 0x15, + .set_ts_params = cx24123_set_ts_param, + .lnb_polarity = 1, +}; + +static const struct s5h1409_config pinnacle_pctv_hd_800i_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, +}; + +static const struct s5h1409_config dvico_hdtv5_pci_nano_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static const struct s5h1409_config kworld_atsc_120_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static const struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { + .i2c_address = 0x64, + .if_khz = 5380, +}; + +static const struct zl10353_config cx88_pinnacle_hybrid_pctv = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .if2 = 45600, +}; + +static const struct zl10353_config cx88_geniatech_x8000_mt = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static const struct s5h1411_config dvico_fusionhdtv7_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING +}; + +static const struct xc5000_config dvico_fusionhdtv7_tuner_config = { + .i2c_address = 0xc2 >> 1, + .if_khz = 5380, +}; + +static int attach_xc3028(u8 addr, struct cx8802_dev *dev) +{ + struct dvb_frontend *fe; + struct videobuf_dvb_frontend *fe0 = NULL; + struct xc2028_ctrl ctl; + struct xc2028_config cfg = { + .i2c_adap = &dev->core->i2c_adap, + .i2c_addr = addr, + .ctrl = &ctl, + }; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + if (!fe0->dvb.frontend) { + printk(KERN_ERR "%s/2: dvb frontend not attached. " + "Can't attach xc3028\n", + dev->core->name); + return -EINVAL; + } + + /* + * Some xc3028 devices may be hidden by an I2C gate. This is known + * to happen with some s5h1409-based devices. + * Now that I2C gate is open, sets up xc3028 configuration + */ + cx88_setup_xc3028(dev->core, &ctl); + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc3028 attach failed\n", + dev->core->name); + dvb_frontend_detach(fe0->dvb.frontend); + dvb_unregister_frontend(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; + return -EINVAL; + } + + printk(KERN_INFO "%s/2: xc3028 attached\n", + dev->core->name); + + return 0; +} + +static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg) +{ + struct dvb_frontend *fe; + struct videobuf_dvb_frontend *fe0 = NULL; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + if (!fe0->dvb.frontend) { + printk(KERN_ERR "%s/2: dvb frontend not attached. " + "Can't attach xc4000\n", + dev->core->name); + return -EINVAL; + } + + fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, &dev->core->i2c_adap, + cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc4000 attach failed\n", + dev->core->name); + dvb_frontend_detach(fe0->dvb.frontend); + dvb_unregister_frontend(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; + return -EINVAL; + } + + printk(KERN_INFO "%s/2: xc4000 attached\n", dev->core->name); + + return 0; +} + +static int cx24116_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 0x2; + + return 0; +} + +static int stv0900_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 0; + + return 0; +} + +static int cx24116_reset_device(struct dvb_frontend *fe) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + /* Reset the part */ + /* Put the cx24116 into reset */ + cx_write(MO_SRST_IO, 0); + msleep(10); + /* Take the cx24116 out of reset */ + cx_write(MO_SRST_IO, 1); + msleep(10); + + return 0; +} + +static const struct cx24116_config hauppauge_hvr4000_config = { + .demod_address = 0x05, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + +static const struct cx24116_config tevii_s460_config = { + .demod_address = 0x55, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + +static int ds3000_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 4; + + return 0; +} + +static struct ds3000_config tevii_ds3000_config = { + .demod_address = 0x68, + .set_ts_params = ds3000_set_ts_param, +}; + +static struct ts2020_config tevii_ts2020_config = { + .tuner_address = 0x60, + .clk_out_div = 1, +}; + +static const struct stv0900_config prof_7301_stv0900_config = { + .demod_address = 0x6a, +/* demod_mode = 0,*/ + .xtal = 27000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .tun1_maddress = 0,/* 0x60 */ + .tun1_adc = 0,/* 2 Vpp */ + .path1_mode = 3, + .set_ts_params = stv0900_set_ts_param, +}; + +static const struct stb6100_config prof_7301_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static const struct stv0299_config tevii_tuner_sharp_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = 1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, + .set_ts_params = cx24116_set_ts_param, +}; + +static const struct stv0288_config tevii_tuner_earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + .set_ts_params = cx24116_set_ts_param, +}; + +static int cx8802_alloc_frontends(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe = NULL; + int i; + + mutex_init(&dev->frontends.lock); + INIT_LIST_HEAD(&dev->frontends.felist); + + if (!core->board.num_frontends) + return -ENODEV; + + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + core->board.num_frontends); + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if (!fe) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + videobuf_dvb_dealloc_frontends(&dev->frontends); + return -ENOMEM; + } + } + return 0; +} + + + +static const u8 samsung_smt_7020_inittab[] = { + 0x01, 0x15, + 0x02, 0x00, + 0x03, 0x00, + 0x04, 0x7D, + 0x05, 0x0F, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x60, + + 0x0A, 0xC2, + 0x0B, 0x00, + 0x0C, 0x01, + 0x0D, 0x81, + 0x0E, 0x44, + 0x0F, 0x09, + 0x10, 0x3C, + 0x11, 0x84, + 0x12, 0xDA, + 0x13, 0x99, + 0x14, 0x8D, + 0x15, 0xCE, + 0x16, 0xE8, + 0x17, 0x43, + 0x18, 0x1C, + 0x19, 0x1B, + 0x1A, 0x1D, + + 0x1C, 0x12, + 0x1D, 0x00, + 0x1E, 0x00, + 0x1F, 0x00, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + + 0x28, 0x02, + 0x29, 0x28, + 0x2A, 0x14, + 0x2B, 0x0F, + 0x2C, 0x09, + 0x2D, 0x05, + + 0x31, 0x1F, + 0x32, 0x19, + 0x33, 0xFC, + 0x34, 0x13, + 0xff, 0xff, +}; + + +static int samsung_smt_7020_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct cx8802_dev *dev = fe->dvb->priv; + u8 buf[4]; + u32 div; + struct i2c_msg msg = { + .addr = 0x61, + .flags = 0, + .buf = buf, + .len = sizeof(buf) }; + + div = c->frequency / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x84; /* 0xC4 */ + buf[3] = 0x00; + + if (c->frequency < 1500000) + buf[3] |= 0x10; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(&dev->core->i2c_adap, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static int samsung_smt_7020_set_tone(struct dvb_frontend *fe, + fe_sec_tone_mode_t tone) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + cx_set(MO_GP0_IO, 0x0800); + + switch (tone) { + case SEC_TONE_ON: + cx_set(MO_GP0_IO, 0x08); + break; + case SEC_TONE_OFF: + cx_clear(MO_GP0_IO, 0x08); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int samsung_smt_7020_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + u8 data; + struct i2c_msg msg = { + .addr = 8, + .flags = 0, + .buf = &data, + .len = sizeof(data) }; + + cx_set(MO_GP0_IO, 0x8000); + + switch (voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + data = ISL6421_EN1 | ISL6421_LLC1; + cx_clear(MO_GP0_IO, 0x80); + break; + case SEC_VOLTAGE_18: + data = ISL6421_EN1 | ISL6421_LLC1 | ISL6421_VSEL1; + cx_clear(MO_GP0_IO, 0x80); + break; + default: + return -EINVAL; + } + + return (i2c_transfer(&dev->core->i2c_adap, &msg, 1) == 1) ? 0 : -EIO; +} + +static int samsung_smt_7020_stv0299_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); + + return 0; +} + + +static const struct stv0299_config samsung_stv0299_config = { + .demod_address = 0x68, + .inittab = samsung_smt_7020_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_LK, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = samsung_smt_7020_stv0299_set_symbol_rate, +}; + +static int dvb_register(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ + int res = -EINVAL; + + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + goto frontend_detach; + + /* multi-frontend gate control is undefined or defaults to fe0 */ + dev->frontends.gate = 0; + + /* Sets the gate control callback to be used by i2c command calls */ + core->gate_ctrl = cx88_dvb_gate_ctrl; + + /* init frontend(s) */ + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_DVB_T1: + fe0->dvb.frontend = dvb_attach(cx22702_attach, + &connexant_refboard_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, &core->i2c_adap, + DVB_PLL_THOMSON_DTT759X)) + goto frontend_detach; + } + break; + case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1: + case CX88_BOARD_CONEXANT_DVB_T1: + case CX88_BOARD_KWORLD_DVB_T_CX22702: + case CX88_BOARD_WINFAST_DTV1000: + fe0->dvb.frontend = dvb_attach(cx22702_attach, + &connexant_refboard_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x60, &core->i2c_adap, + DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + } + break; + case CX88_BOARD_WINFAST_DTV2000H: + case CX88_BOARD_HAUPPAUGE_HVR1100: + case CX88_BOARD_HAUPPAUGE_HVR1100LP: + case CX88_BOARD_HAUPPAUGE_HVR1300: + fe0->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; + } + break; + case CX88_BOARD_WINFAST_DTV2000H_J: + fe0->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216MEX_MK3)) + goto frontend_detach; + } + break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + /* MFE frontend 1 */ + mfe_shared = 1; + dev->frontends.gate = 2; + /* DVB-S init */ + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &hauppauge_novas_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, + fe0->dvb.frontend, + &dev->core->i2c_adap, + 0x08, ISL6421_DCL, 0x00, false)) + goto frontend_detach; + } + /* MFE frontend 2 */ + fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); + if (!fe1) + goto frontend_detach; + /* DVB-T init */ + fe1->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (fe1->dvb.frontend) { + fe1->dvb.frontend->id = 1; + if (!dvb_attach(simple_tuner_attach, + fe1->dvb.frontend, + &dev->core->i2c_adap, + 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + break; + } + /* ZL10353 replaces MT352 on later cards */ + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_plus_v1_1, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: + /* The tin box says DEE1601, but it seems to be DTT7579 + * compatible, with a slightly different MT352 AGC gain. */ + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv_dual, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + break; + } + /* ZL10353 replaces MT352 on later cards */ + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_plus_v1_1, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, NULL, DVB_PLL_LG_Z201)) + goto frontend_detach; + } + break; + case CX88_BOARD_KWORLD_DVB_T: + case CX88_BOARD_DNTV_LIVE_DVB_T: + case CX88_BOARD_ADSTECH_DVB_T_PCI: + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dntv_live_dvbt_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, NULL, DVB_PLL_UNKNOWN_1)) + goto frontend_detach; + } + break; + case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: +#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054) + /* MT352 is on a secondary I2C bus made from some GPIO lines */ + fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config, + &dev->vp3054->adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; + } +#else + printk(KERN_ERR "%s/2: built without vp3054 support\n", + core->name); +#endif + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_hybrid, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_FE6600)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &core->i2c_adap); + if (fe0->dvb.frontend == NULL) + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv_mt352_xc3028, + &core->i2c_adap); + /* + * On this board, the demod provides the I2C bus pullup. + * We must not permit gate_ctrl to be performed, or + * the xc3028 cannot communicate on the bus. + */ + if (fe0->dvb.frontend) + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_PCHDTV_HD3000: + fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_DTT761X)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q: + dev->ts_gen_cntrl = 0x08; + + /* Do a hardware reset of chip before using it. */ + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 1); + mdelay(200); + + /* Select RF connector callback */ + fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set; + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &fusionhdtv_3_gold, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_MICROTUNE_4042FI5)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T: + dev->ts_gen_cntrl = 0x08; + + /* Do a hardware reset of chip before using it. */ + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 9); + mdelay(200); + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &fusionhdtv_3_gold, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_DTT761X)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: + dev->ts_gen_cntrl = 0x08; + + /* Do a hardware reset of chip before using it. */ + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 1); + mdelay(200); + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &fusionhdtv_5_gold, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF)) + goto frontend_detach; + if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x43)) + goto frontend_detach; + } + break; + case CX88_BOARD_PCHDTV_HD5500: + dev->ts_gen_cntrl = 0x08; + + /* Do a hardware reset of chip before using it. */ + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 1); + mdelay(200); + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &pchdtv_hd5500, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF)) + goto frontend_detach; + if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x43)) + goto frontend_detach; + } + break; + case CX88_BOARD_ATI_HDTVWONDER: + fe0->dvb.frontend = dvb_attach(nxt200x_attach, + &ati_hdtvwonder, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_TUV1236D)) + goto frontend_detach; + } + break; + case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: + case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &hauppauge_novas_config, + &core->i2c_adap); + if (fe0->dvb.frontend) { + bool override_tone; + + if (core->model == 92001) + override_tone = true; + else + override_tone = false; + + if (!dvb_attach(isl6421_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x08, ISL6421_DCL, 0x00, + override_tone)) + goto frontend_detach; + } + break; + case CX88_BOARD_KWORLD_DVBS_100: + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &kworld_dvbs_100_config, + &core->i2c_adap); + if (fe0->dvb.frontend) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage; + } + break; + case CX88_BOARD_GENIATECH_DVBS: + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &geniatech_dvbs_config, + &core->i2c_adap); + if (fe0->dvb.frontend) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; + } + break; + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &pinnacle_pctv_hd_800i_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, + &core->i2c_adap, + &pinnacle_pctv_hd_800i_tuner_config)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &dvico_hdtv5_pci_nano_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &core->i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .scode_table = XC3028_FE_OREN538, + }; + + fe = dvb_attach(xc2028_attach, + fe0->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX88_BOARD_PINNACLE_HYBRID_PCTV: + case CX88_BOARD_WINFAST_DTV1800H: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_pinnacle_hybrid_pctv, + &core->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + } + break; + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_pinnacle_hybrid_pctv, + &core->i2c_adap); + if (fe0->dvb.frontend) { + struct xc4000_config cfg = { + .i2c_address = 0x61, + .default_pm = 0, + .dvb_amplitude = 134, + .set_smoothedcvbs = 1, + .if_khz = 4560 + }; + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc4000(dev, &cfg) < 0) + goto frontend_detach; + } + break; + case CX88_BOARD_GENIATECH_X8000_MT: + dev->ts_gen_cntrl = 0x00; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_geniatech_x8000_mt, + &core->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_KWORLD_ATSC_120: + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &kworld_atsc_120_config, + &core->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &dvico_fusionhdtv7_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, + &core->i2c_adap, + &dvico_fusionhdtv7_tuner_config)) + goto frontend_detach; + } + break; + case CX88_BOARD_HAUPPAUGE_HVR4000: + /* MFE frontend 1 */ + mfe_shared = 1; + dev->frontends.gate = 2; + /* DVB-S/S2 Init */ + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, + fe0->dvb.frontend, + &dev->core->i2c_adap, + 0x08, ISL6421_DCL, 0x00, false)) + goto frontend_detach; + } + /* MFE frontend 2 */ + fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); + if (!fe1) + goto frontend_detach; + /* DVB-T Init */ + fe1->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (fe1->dvb.frontend) { + fe1->dvb.frontend->id = 1; + if (!dvb_attach(simple_tuner_attach, + fe1->dvb.frontend, + &dev->core->i2c_adap, + 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; + } + break; + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, + fe0->dvb.frontend, + &dev->core->i2c_adap, + 0x08, ISL6421_DCL, 0x00, false)) + goto frontend_detach; + } + break; + case CX88_BOARD_PROF_6200: + case CX88_BOARD_TBS_8910: + case CX88_BOARD_TEVII_S420: + fe0->dvb.frontend = dvb_attach(stv0299_attach, + &tevii_tuner_sharp_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, + &core->i2c_adap, DVB_PLL_OPERA1)) + goto frontend_detach; + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + + } else { + fe0->dvb.frontend = dvb_attach(stv0288_attach, + &tevii_tuner_earda_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6000_attach, fe0->dvb.frontend, 0x61, + &core->i2c_adap)) + goto frontend_detach; + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + } + } + break; + case CX88_BOARD_TEVII_S460: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tevii_s460_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + break; + case CX88_BOARD_TEVII_S464: + fe0->dvb.frontend = dvb_attach(ds3000_attach, + &tevii_ds3000_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(ts2020_attach, fe0->dvb.frontend, + &tevii_ts2020_config, &core->i2c_adap); + fe0->dvb.frontend->ops.set_voltage = + tevii_dvbs_set_voltage; + } + break; + case CX88_BOARD_OMICOM_SS4_PCI: + case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_7300: + case CX88_BOARD_SATTRADE_ST4200: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + break; + case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_terratec_cinergy_ht_pci_mkii_config, + &core->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + } + break; + case CX88_BOARD_PROF_7301:{ + struct dvb_tuner_ops *tuner_ops = NULL; + + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &prof_7301_stv0900_config, + &core->i2c_adap, 0); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6100_attach, fe0->dvb.frontend, + &prof_7301_stb6100_config, + &core->i2c_adap)) + goto frontend_detach; + + tuner_ops = &fe0->dvb.frontend->ops.tuner_ops; + tuner_ops->set_frequency = stb6100_set_freq; + tuner_ops->get_frequency = stb6100_get_freq; + tuner_ops->set_bandwidth = stb6100_set_bandw; + tuner_ops->get_bandwidth = stb6100_get_bandw; + + core->prev_set_voltage = + fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = + tevii_dvbs_set_voltage; + } + break; + } + case CX88_BOARD_SAMSUNG_SMT_7020: + dev->ts_gen_cntrl = 0x08; + + cx_set(MO_GP0_IO, 0x0101); + + cx_clear(MO_GP0_IO, 0x01); + mdelay(100); + cx_set(MO_GP0_IO, 0x01); + mdelay(200); + + fe0->dvb.frontend = dvb_attach(stv0299_attach, + &samsung_stv0299_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.set_params = + samsung_smt_7020_tuner_set_params; + fe0->dvb.frontend->tuner_priv = + &dev->core->i2c_adap; + fe0->dvb.frontend->ops.set_voltage = + samsung_smt_7020_set_voltage; + fe0->dvb.frontend->ops.set_tone = + samsung_smt_7020_set_tone; + } + + break; + case CX88_BOARD_TWINHAN_VP1027_DVBS: + dev->ts_gen_cntrl = 0x00; + fe0->dvb.frontend = dvb_attach(mb86a16_attach, + &twinhan_vp1027, + &core->i2c_adap); + if (fe0->dvb.frontend) { + core->prev_set_voltage = + fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = + vp1027_set_voltage; + } + break; + + default: + printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", + core->name); + break; + } + + if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) { + printk(KERN_ERR + "%s/2: frontend initialization failed\n", + core->name); + goto frontend_detach; + } + /* define general-purpose callback pointer */ + fe0->dvb.frontend->callback = cx88_tuner_callback; + + /* Ensure all frontends negotiate bus access */ + fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; + if (fe1) + fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; + + /* Put the analog decoder in standby to keep it quiet */ + call_all(core, core, s_power, 0); + + /* register everything */ + res = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, + &dev->pci->dev, adapter_nr, mfe_shared); + if (res) + goto frontend_detach; + return res; + +frontend_detach: + core->gate_ctrl = NULL; + videobuf_dvb_dealloc_frontends(&dev->frontends); + return res; +} + +/* ----------------------------------------------------------- */ + +/* CX8802 MPEG -> mini driver - We have been given the hardware */ +static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + dprintk( 1, "%s\n", __func__); + + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* We arrive here with either the cx23416 or the cx22702 + * on the bus. Take the bus from the cx23416 and enable the + * cx22702 demod + */ + /* Toggle reset on cx22702 leaving i2c active */ + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + /* enable the cx22702 pins */ + cx_clear(MO_GP0_IO, 0x00000004); + udelay(1000); + break; + + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + /* Toggle reset on cx22702 leaving i2c active */ + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + switch (core->dvbdev->frontends.active_fe_id) { + case 1: /* DVB-S/S2 Enabled */ + /* tri-state the cx22702 pins */ + cx_set(MO_GP0_IO, 0x00000004); + /* Take the cx24116/cx24123 out of reset */ + cx_write(MO_SRST_IO, 1); + core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */ + break; + case 2: /* DVB-T Enabled */ + /* Put the cx24116/cx24123 into reset */ + cx_write(MO_SRST_IO, 0); + /* enable the cx22702 pins */ + cx_clear(MO_GP0_IO, 0x00000004); + core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */ + break; + } + udelay(1000); + break; + + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + /* set RF input to AIR for DVB-T (GPIO 16) */ + cx_write(MO_GP2_IO, 0x0101); + break; + + default: + err = -ENODEV; + } + return err; +} + +/* CX8802 MPEG -> mini driver - We no longer have the hardware */ +static int cx8802_dvb_advise_release(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + dprintk( 1, "%s\n", __func__); + + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* Do Nothing, leave the cx22702 on the bus. */ + break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + break; + default: + err = -ENODEV; + } + return err; +} + +static int cx8802_dvb_probe(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + struct cx8802_dev *dev = drv->core->dvbdev; + int err; + struct videobuf_dvb_frontend *fe; + int i; + + dprintk( 1, "%s\n", __func__); + dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", + core->boardnr, + core->name, + core->pci_bus, + core->pci_slot); + + err = -ENODEV; + if (!(core->board.mpeg & CX88_MPEG_DVB)) + goto fail_core; + + /* If vp3054 isn't enabled, a stub will just return 0 */ + err = vp3054_i2c_probe(dev); + if (0 != err) + goto fail_core; + + /* dvb stuff */ + printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); + dev->ts_gen_cntrl = 0x0c; + + err = cx8802_alloc_frontends(dev); + if (err) + goto fail_core; + + err = -ENODEV; + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); + if (fe == NULL) { + printk(KERN_ERR "%s() failed to get frontend(%d)\n", + __func__, i); + goto fail_probe; + } + videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_TOP, + sizeof(struct cx88_buffer), + dev, NULL); + /* init struct videobuf_dvb */ + fe->dvb.name = dev->core->name; + } + + err = dvb_register(dev); + if (err) + /* frontends/adapter de-allocated in dvb_register */ + printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n", + core->name, err); + return err; +fail_probe: + videobuf_dvb_dealloc_frontends(&core->dvbdev->frontends); +fail_core: + return err; +} + +static int cx8802_dvb_remove(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + struct cx8802_dev *dev = drv->core->dvbdev; + + dprintk( 1, "%s\n", __func__); + + videobuf_dvb_unregister_bus(&dev->frontends); + + vp3054_i2c_remove(dev); + + core->gate_ctrl = NULL; + + return 0; +} + +static struct cx8802_driver cx8802_dvb_driver = { + .type_id = CX88_MPEG_DVB, + .hw_access = CX8802_DRVCTL_SHARED, + .probe = cx8802_dvb_probe, + .remove = cx8802_dvb_remove, + .advise_acquire = cx8802_dvb_advise_acquire, + .advise_release = cx8802_dvb_advise_release, +}; + +static int __init dvb_init(void) +{ + printk(KERN_INFO "cx88/2: cx2388x dvb driver version %s loaded\n", + CX88_VERSION); + return cx8802_register_driver(&cx8802_dvb_driver); +} + +static void __exit dvb_fini(void) +{ + cx8802_unregister_driver(&cx8802_dvb_driver); +} + +module_init(dvb_init); +module_exit(dvb_fini); diff --git a/drivers/media/pci/cx88/cx88-i2c.c b/drivers/media/pci/cx88/cx88-i2c.c new file mode 100644 index 00000000..cf2d6961 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-i2c.c @@ -0,0 +1,183 @@ + +/* + + cx88-i2c.c -- all the i2c code is here + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) + (c) 2002 Yurij Sysoev + (c) 1999-2003 Gerd Knorr + + (c) 2005 Mauro Carvalho Chehab + - Multituner support and i2c address binding + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include + +#include + +#include "cx88.h" +#include + +static unsigned int i2c_debug; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]"); + +static unsigned int i2c_scan; +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); + +static unsigned int i2c_udelay = 5; +module_param(i2c_udelay, int, 0644); +MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs " + "(should be 5 or higher). Lower value means higher bus speed."); + +#define dprintk(level,fmt, arg...) if (i2c_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, core->name , ## arg) + +/* ----------------------------------------------------------------------- */ + +static void cx8800_bit_setscl(void *data, int state) +{ + struct cx88_core *core = data; + + if (state) + core->i2c_state |= 0x02; + else + core->i2c_state &= ~0x02; + cx_write(MO_I2C, core->i2c_state); + cx_read(MO_I2C); +} + +static void cx8800_bit_setsda(void *data, int state) +{ + struct cx88_core *core = data; + + if (state) + core->i2c_state |= 0x01; + else + core->i2c_state &= ~0x01; + cx_write(MO_I2C, core->i2c_state); + cx_read(MO_I2C); +} + +static int cx8800_bit_getscl(void *data) +{ + struct cx88_core *core = data; + u32 state; + + state = cx_read(MO_I2C); + return state & 0x02 ? 1 : 0; +} + +static int cx8800_bit_getsda(void *data) +{ + struct cx88_core *core = data; + u32 state; + + state = cx_read(MO_I2C); + return state & 0x01; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_algo_bit_data cx8800_i2c_algo_template = { + .setsda = cx8800_bit_setsda, + .setscl = cx8800_bit_setscl, + .getsda = cx8800_bit_getsda, + .getscl = cx8800_bit_getscl, + .udelay = 16, + .timeout = 200, +}; + +/* ----------------------------------------------------------------------- */ + +static const char * const i2c_devs[128] = { + [ 0x1c >> 1 ] = "lgdt330x", + [ 0x86 >> 1 ] = "tda9887/cx22702", + [ 0xa0 >> 1 ] = "eeprom", + [ 0xc0 >> 1 ] = "tuner (analog)", + [ 0xc2 >> 1 ] = "tuner (analog/dvb)", + [ 0xc8 >> 1 ] = "xc5000", +}; + +static void do_i2c_scan(const char *name, struct i2c_client *c) +{ + unsigned char buf; + int i,rc; + + for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) { + c->addr = i; + rc = i2c_master_recv(c,&buf,0); + if (rc < 0) + continue; + printk("%s: i2c scan: found device @ 0x%x [%s]\n", + name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); + } +} + +/* init + register i2c adapter */ +int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) +{ + /* Prevents usage of invalid delay values */ + if (i2c_udelay<5) + i2c_udelay=5; + + core->i2c_algo = cx8800_i2c_algo_template; + + + core->i2c_adap.dev.parent = &pci->dev; + strlcpy(core->i2c_adap.name,core->name,sizeof(core->i2c_adap.name)); + core->i2c_adap.owner = THIS_MODULE; + core->i2c_algo.udelay = i2c_udelay; + core->i2c_algo.data = core; + i2c_set_adapdata(&core->i2c_adap, &core->v4l2_dev); + core->i2c_adap.algo_data = &core->i2c_algo; + core->i2c_client.adapter = &core->i2c_adap; + strlcpy(core->i2c_client.name, "cx88xx internal", I2C_NAME_SIZE); + + cx8800_bit_setscl(core,1); + cx8800_bit_setsda(core,1); + + core->i2c_rc = i2c_bit_add_bus(&core->i2c_adap); + if (0 == core->i2c_rc) { + static u8 tuner_data[] = + { 0x0b, 0xdc, 0x86, 0x52 }; + static struct i2c_msg tuner_msg = + { .flags = 0, .addr = 0xc2 >> 1, .buf = tuner_data, .len = 4 }; + + dprintk(1, "i2c register ok\n"); + switch( core->boardnr ) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + printk("%s: i2c init: enabling analog demod on HVR1300/3000/4000 tuner\n", + core->name); + i2c_transfer(core->i2c_client.adapter, &tuner_msg, 1); + break; + default: + break; + } + if (i2c_scan) + do_i2c_scan(core->name,&core->i2c_client); + } else + printk("%s: i2c register FAILED\n", core->name); + + return core->i2c_rc; +} diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c new file mode 100644 index 00000000..f29e18c7 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-input.c @@ -0,0 +1,635 @@ +/* + * + * Device driver for GPIO attached remote control interfaces + * on Conexant 2388x based TV/DVB cards. + * + * Copyright (c) 2003 Pavel Machek + * Copyright (c) 2004 Gerd Knorr + * Copyright (c) 2004, 2005 Chris Pascoe + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include "cx88.h" +#include + +#define MODULE_NAME "cx88xx" + +/* ---------------------------------------------------------------------- */ + +struct cx88_IR { + struct cx88_core *core; + struct rc_dev *dev; + + int users; + + char name[32]; + char phys[32]; + + /* sample from gpio pin 16 */ + u32 sampling; + + /* poll external decoder */ + int polling; + struct hrtimer timer; + u32 gpio_addr; + u32 last_gpio; + u32 mask_keycode; + u32 mask_keydown; + u32 mask_keyup; +}; + +static unsigned ir_samplerate = 4; +module_param(ir_samplerate, uint, 0444); +MODULE_PARM_DESC(ir_samplerate, "IR samplerate in kHz, 1 - 20, default 4"); + +static int ir_debug; +module_param(ir_debug, int, 0644); /* debug level [IR] */ +MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); + +#define ir_dprintk(fmt, arg...) if (ir_debug) \ + printk(KERN_DEBUG "%s IR: " fmt , ir->core->name , ##arg) + +#define dprintk(fmt, arg...) if (ir_debug) \ + printk(KERN_DEBUG "cx88 IR: " fmt , ##arg) + +/* ---------------------------------------------------------------------- */ + +static void cx88_ir_handle_key(struct cx88_IR *ir) +{ + struct cx88_core *core = ir->core; + u32 gpio, data, auxgpio; + + /* read gpio value */ + gpio = cx_read(ir->gpio_addr); + switch (core->boardnr) { + case CX88_BOARD_NPGTECH_REALTV_TOP10FM: + /* This board apparently uses a combination of 2 GPIO + to represent the keys. Additionally, the second GPIO + can be used for parity. + + Example: + + for key "5" + gpio = 0x758, auxgpio = 0xe5 or 0xf5 + for key "Power" + gpio = 0x758, auxgpio = 0xed or 0xfd + */ + + auxgpio = cx_read(MO_GP1_IO); + /* Take out the parity part */ + gpio=(gpio & 0x7fd) + (auxgpio & 0xef); + break; + case CX88_BOARD_WINFAST_DTV1000: + case CX88_BOARD_WINFAST_DTV1800H: + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43: + gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900); + auxgpio = gpio; + break; + default: + auxgpio = gpio; + } + if (ir->polling) { + if (ir->last_gpio == auxgpio) + return; + ir->last_gpio = auxgpio; + } + + /* extract data */ + data = ir_extract_bits(gpio, ir->mask_keycode); + ir_dprintk("irq gpio=0x%x code=%d | %s%s%s\n", + gpio, data, + ir->polling ? "poll" : "irq", + (gpio & ir->mask_keydown) ? " down" : "", + (gpio & ir->mask_keyup) ? " up" : ""); + + if (ir->core->boardnr == CX88_BOARD_NORWOOD_MICRO) { + u32 gpio_key = cx_read(MO_GP0_IO); + + data = (data << 4) | ((gpio_key & 0xf0) >> 4); + + rc_keydown(ir->dev, data, 0); + + } else if (ir->mask_keydown) { + /* bit set on keydown */ + if (gpio & ir->mask_keydown) + rc_keydown_notimeout(ir->dev, data, 0); + else + rc_keyup(ir->dev); + + } else if (ir->mask_keyup) { + /* bit cleared on keydown */ + if (0 == (gpio & ir->mask_keyup)) + rc_keydown_notimeout(ir->dev, data, 0); + else + rc_keyup(ir->dev); + + } else { + /* can't distinguish keydown/up :-/ */ + rc_keydown_notimeout(ir->dev, data, 0); + rc_keyup(ir->dev); + } +} + +static enum hrtimer_restart cx88_ir_work(struct hrtimer *timer) +{ + unsigned long missed; + struct cx88_IR *ir = container_of(timer, struct cx88_IR, timer); + + cx88_ir_handle_key(ir); + missed = hrtimer_forward_now(&ir->timer, + ktime_set(0, ir->polling * 1000000)); + if (missed > 1) + ir_dprintk("Missed ticks %ld\n", missed - 1); + + return HRTIMER_RESTART; +} + +static int __cx88_ir_start(void *priv) +{ + struct cx88_core *core = priv; + struct cx88_IR *ir; + + if (!core || !core->ir) + return -EINVAL; + + ir = core->ir; + + if (ir->polling) { + hrtimer_init(&ir->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + ir->timer.function = cx88_ir_work; + hrtimer_start(&ir->timer, + ktime_set(0, ir->polling * 1000000), + HRTIMER_MODE_REL); + } + if (ir->sampling) { + core->pci_irqmask |= PCI_INT_IR_SMPINT; + cx_write(MO_DDS_IO, 0x33F286 * ir_samplerate); /* samplerate */ + cx_write(MO_DDSCFG_IO, 0x5); /* enable */ + } + return 0; +} + +static void __cx88_ir_stop(void *priv) +{ + struct cx88_core *core = priv; + struct cx88_IR *ir; + + if (!core || !core->ir) + return; + + ir = core->ir; + if (ir->sampling) { + cx_write(MO_DDSCFG_IO, 0x0); + core->pci_irqmask &= ~PCI_INT_IR_SMPINT; + } + + if (ir->polling) + hrtimer_cancel(&ir->timer); +} + +int cx88_ir_start(struct cx88_core *core) +{ + if (core->ir->users) + return __cx88_ir_start(core); + + return 0; +} + +void cx88_ir_stop(struct cx88_core *core) +{ + if (core->ir->users) + __cx88_ir_stop(core); +} + +static int cx88_ir_open(struct rc_dev *rc) +{ + struct cx88_core *core = rc->priv; + + core->ir->users++; + return __cx88_ir_start(core); +} + +static void cx88_ir_close(struct rc_dev *rc) +{ + struct cx88_core *core = rc->priv; + + core->ir->users--; + if (!core->ir->users) + __cx88_ir_stop(core); +} + +/* ---------------------------------------------------------------------- */ + +int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) +{ + struct cx88_IR *ir; + struct rc_dev *dev; + char *ir_codes = NULL; + u64 rc_type = RC_BIT_OTHER; + int err = -ENOMEM; + u32 hardware_mask = 0; /* For devices with a hardware mask, when + * used with a full-code IR table + */ + + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + dev = rc_allocate_device(); + if (!ir || !dev) + goto err_out_free; + + ir->dev = dev; + + /* detect & configure */ + switch (core->boardnr) { + case CX88_BOARD_DNTV_LIVE_DVB_T: + case CX88_BOARD_KWORLD_DVB_T: + case CX88_BOARD_KWORLD_DVB_T_CX22702: + ir_codes = RC_MAP_DNTV_LIVE_DVB_T; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keycode = 0x1f; + ir->mask_keyup = 0x60; + ir->polling = 50; /* ms */ + break; + case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1: + ir_codes = RC_MAP_CINERGY_1400; + ir->sampling = 0xeb04; /* address */ + break; + case CX88_BOARD_HAUPPAUGE: + case CX88_BOARD_HAUPPAUGE_DVB_T1: + case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: + case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: + case CX88_BOARD_HAUPPAUGE_HVR1100: + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + case CX88_BOARD_PCHDTV_HD3000: + case CX88_BOARD_PCHDTV_HD5500: + case CX88_BOARD_HAUPPAUGE_IRONLY: + ir_codes = RC_MAP_HAUPPAUGE; + ir->sampling = 1; + break; + case CX88_BOARD_WINFAST_DTV2000H: + case CX88_BOARD_WINFAST_DTV2000H_J: + case CX88_BOARD_WINFAST_DTV1800H: + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + ir_codes = RC_MAP_WINFAST; + ir->gpio_addr = MO_GP0_IO; + ir->mask_keycode = 0x8f8; + ir->mask_keyup = 0x100; + ir->polling = 50; /* ms */ + break; + case CX88_BOARD_WINFAST2000XP_EXPERT: + case CX88_BOARD_WINFAST_DTV1000: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43: + ir_codes = RC_MAP_WINFAST; + ir->gpio_addr = MO_GP0_IO; + ir->mask_keycode = 0x8f8; + ir->mask_keyup = 0x100; + ir->polling = 1; /* ms */ + break; + case CX88_BOARD_IODATA_GVBCTV7E: + ir_codes = RC_MAP_IODATA_BCTV7E; + ir->gpio_addr = MO_GP0_IO; + ir->mask_keycode = 0xfd; + ir->mask_keydown = 0x02; + ir->polling = 5; /* ms */ + break; + case CX88_BOARD_PROLINK_PLAYTVPVR: + case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO: + /* + * It seems that this hardware is paired with NEC extended + * address 0x866b. So, unfortunately, its usage with other + * IR's with different address won't work. Still, there are + * other IR's from the same manufacturer that works, like the + * 002-T mini RC, provided with newer PV hardware + */ + ir_codes = RC_MAP_PIXELVIEW_MK12; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keyup = 0x80; + ir->polling = 10; /* ms */ + hardware_mask = 0x3f; /* Hardware returns only 6 bits from command part */ + break; + case CX88_BOARD_PROLINK_PV_8000GT: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: + ir_codes = RC_MAP_PIXELVIEW_NEW; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keycode = 0x3f; + ir->mask_keyup = 0x80; + ir->polling = 1; /* ms */ + break; + case CX88_BOARD_KWORLD_LTV883: + ir_codes = RC_MAP_PIXELVIEW; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keycode = 0x1f; + ir->mask_keyup = 0x60; + ir->polling = 1; /* ms */ + break; + case CX88_BOARD_ADSTECH_DVB_T_PCI: + ir_codes = RC_MAP_ADSTECH_DVB_T_PCI; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keycode = 0xbf; + ir->mask_keyup = 0x40; + ir->polling = 50; /* ms */ + break; + case CX88_BOARD_MSI_TVANYWHERE_MASTER: + ir_codes = RC_MAP_MSI_TVANYWHERE; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keycode = 0x1f; + ir->mask_keyup = 0x40; + ir->polling = 1; /* ms */ + break; + case CX88_BOARD_AVERTV_303: + case CX88_BOARD_AVERTV_STUDIO_303: + ir_codes = RC_MAP_AVERTV_303; + ir->gpio_addr = MO_GP2_IO; + ir->mask_keycode = 0xfb; + ir->mask_keydown = 0x02; + ir->polling = 50; /* ms */ + break; + case CX88_BOARD_OMICOM_SS4_PCI: + case CX88_BOARD_SATTRADE_ST4200: + case CX88_BOARD_TBS_8920: + case CX88_BOARD_TBS_8910: + case CX88_BOARD_PROF_7300: + case CX88_BOARD_PROF_7301: + case CX88_BOARD_PROF_6200: + ir_codes = RC_MAP_TBS_NEC; + ir->sampling = 0xff00; /* address */ + break; + case CX88_BOARD_TEVII_S464: + case CX88_BOARD_TEVII_S460: + case CX88_BOARD_TEVII_S420: + ir_codes = RC_MAP_TEVII_NEC; + ir->sampling = 0xff00; /* address */ + break; + case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: + ir_codes = RC_MAP_DNTV_LIVE_DVBT_PRO; + ir->sampling = 0xff00; /* address */ + break; + case CX88_BOARD_NORWOOD_MICRO: + ir_codes = RC_MAP_NORWOOD; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keycode = 0x0e; + ir->mask_keyup = 0x80; + ir->polling = 50; /* ms */ + break; + case CX88_BOARD_NPGTECH_REALTV_TOP10FM: + ir_codes = RC_MAP_NPGTECH; + ir->gpio_addr = MO_GP0_IO; + ir->mask_keycode = 0xfa; + ir->polling = 50; /* ms */ + break; + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + ir_codes = RC_MAP_PINNACLE_PCTV_HD; + ir->sampling = 1; + break; + case CX88_BOARD_POWERCOLOR_REAL_ANGEL: + ir_codes = RC_MAP_POWERCOLOR_REAL_ANGEL; + ir->gpio_addr = MO_GP2_IO; + ir->mask_keycode = 0x7e; + ir->polling = 100; /* ms */ + break; + case CX88_BOARD_TWINHAN_VP1027_DVBS: + ir_codes = RC_MAP_TWINHAN_VP1027_DVBS; + rc_type = RC_BIT_NEC; + ir->sampling = 0xff00; /* address */ + break; + } + + if (!ir_codes) { + err = -ENODEV; + goto err_out_free; + } + + /* + * The usage of mask_keycode were very convenient, due to several + * reasons. Among others, the scancode tables were using the scancode + * as the index elements. So, the less bits it was used, the smaller + * the table were stored. After the input changes, the better is to use + * the full scancodes, since it allows replacing the IR remote by + * another one. Unfortunately, there are still some hardware, like + * Pixelview Ultra Pro, where only part of the scancode is sent via + * GPIO. So, there's no way to get the full scancode. Due to that, + * hardware_mask were introduced here: it represents those hardware + * that has such limits. + */ + if (hardware_mask && !ir->mask_keycode) + ir->mask_keycode = hardware_mask; + + /* init input device */ + snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name); + snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci)); + + dev->input_name = ir->name; + dev->input_phys = ir->phys; + dev->input_id.bustype = BUS_PCI; + dev->input_id.version = 1; + if (pci->subsystem_vendor) { + dev->input_id.vendor = pci->subsystem_vendor; + dev->input_id.product = pci->subsystem_device; + } else { + dev->input_id.vendor = pci->vendor; + dev->input_id.product = pci->device; + } + dev->dev.parent = &pci->dev; + dev->map_name = ir_codes; + dev->driver_name = MODULE_NAME; + dev->priv = core; + dev->open = cx88_ir_open; + dev->close = cx88_ir_close; + dev->scanmask = hardware_mask; + + if (ir->sampling) { + dev->driver_type = RC_DRIVER_IR_RAW; + dev->timeout = 10 * 1000 * 1000; /* 10 ms */ + } else { + dev->driver_type = RC_DRIVER_SCANCODE; + dev->allowed_protos = rc_type; + } + + ir->core = core; + core->ir = ir; + + /* all done */ + err = rc_register_device(dev); + if (err) + goto err_out_free; + + return 0; + +err_out_free: + rc_free_device(dev); + core->ir = NULL; + kfree(ir); + return err; +} + +int cx88_ir_fini(struct cx88_core *core) +{ + struct cx88_IR *ir = core->ir; + + /* skip detach on non attached boards */ + if (NULL == ir) + return 0; + + cx88_ir_stop(core); + rc_unregister_device(ir->dev); + kfree(ir); + + /* done */ + core->ir = NULL; + return 0; +} + +/* ---------------------------------------------------------------------- */ + +void cx88_ir_irq(struct cx88_core *core) +{ + struct cx88_IR *ir = core->ir; + u32 samples; + unsigned todo, bits; + struct ir_raw_event ev; + + if (!ir || !ir->sampling) + return; + + /* + * Samples are stored in a 32 bit register, oldest sample in + * the msb. A set bit represents space and an unset bit + * represents a pulse. + */ + samples = cx_read(MO_SAMPLE_IO); + + if (samples == 0xff && ir->dev->idle) + return; + + init_ir_raw_event(&ev); + for (todo = 32; todo > 0; todo -= bits) { + ev.pulse = samples & 0x80000000 ? false : true; + bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples)); + ev.duration = (bits * (NSEC_PER_SEC / 1000)) / ir_samplerate; + ir_raw_event_store_with_filter(ir->dev, &ev); + samples <<= bits; + } + ir_raw_event_handle(ir->dev); +} + +static int get_key_pvr2000(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + int flags, code; + + /* poll IR chip */ + flags = i2c_smbus_read_byte_data(ir->c, 0x10); + if (flags < 0) { + dprintk("read error\n"); + return 0; + } + /* key pressed ? */ + if (0 == (flags & 0x80)) + return 0; + + /* read actual key code */ + code = i2c_smbus_read_byte_data(ir->c, 0x00); + if (code < 0) { + dprintk("read error\n"); + return 0; + } + + dprintk("IR Key/Flags: (0x%02x/0x%02x)\n", + code & 0xff, flags & 0xff); + + *ir_key = code & 0xff; + *ir_raw = code; + return 1; +} + +void cx88_i2c_init_ir(struct cx88_core *core) +{ + struct i2c_board_info info; + const unsigned short default_addr_list[] = { + 0x18, 0x6b, 0x71, + I2C_CLIENT_END + }; + const unsigned short pvr2000_addr_list[] = { + 0x18, 0x1a, + I2C_CLIENT_END + }; + const unsigned short *addr_list = default_addr_list; + const unsigned short *addrp; + /* Instantiate the IR receiver device, if present */ + if (0 != core->i2c_rc) + return; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + + switch (core->boardnr) { + case CX88_BOARD_LEADTEK_PVR2000: + addr_list = pvr2000_addr_list; + core->init_data.name = "cx88 Leadtek PVR 2000 remote"; + core->init_data.type = RC_BIT_UNKNOWN; + core->init_data.get_key = get_key_pvr2000; + core->init_data.ir_codes = RC_MAP_EMPTY; + break; + } + + /* + * We can't call i2c_new_probed_device() because it uses + * quick writes for probing and at least some RC receiver + * devices only reply to reads. + * Also, Hauppauge XVR needs to be specified, as address 0x71 + * conflicts with another remote type used with saa7134 + */ + for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) { + info.platform_data = NULL; + memset(&core->init_data, 0, sizeof(core->init_data)); + + if (*addrp == 0x71) { + /* Hauppauge XVR */ + core->init_data.name = "cx88 Hauppauge XVR remote"; + core->init_data.ir_codes = RC_MAP_HAUPPAUGE; + core->init_data.type = RC_BIT_RC5; + core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; + + info.platform_data = &core->init_data; + } + if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0, + I2C_SMBUS_READ, 0, + I2C_SMBUS_QUICK, NULL) >= 0) { + info.addr = *addrp; + i2c_new_device(&core->i2c_adap, &info); + break; + } + } +} + +/* ---------------------------------------------------------------------- */ + +MODULE_AUTHOR("Gerd Knorr, Pavel Machek, Chris Pascoe"); +MODULE_DESCRIPTION("input driver for cx88 GPIO-based IR remote controls"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c new file mode 100644 index 00000000..2d3507eb --- /dev/null +++ b/drivers/media/pci/cx88/cx88-mpeg.c @@ -0,0 +1,933 @@ +/* + * + * Support for the mpeg transport stream transfers + * PCI function #2 of the cx2388x. + * + * (c) 2004 Jelle Foks + * (c) 2004 Chris Pascoe + * (c) 2004 Gerd Knorr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "cx88.h" + +/* ------------------------------------------------------------------ */ + +MODULE_DESCRIPTION("mpeg driver for cx2388x based TV cards"); +MODULE_AUTHOR("Jelle Foks "); +MODULE_AUTHOR("Chris Pascoe "); +MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); + +static unsigned int debug; +module_param(debug,int,0644); +MODULE_PARM_DESC(debug,"enable debug messages [mpeg]"); + +#define dprintk(level, fmt, arg...) do { \ + if (debug + 1 > level) \ + printk(KERN_DEBUG "%s/2-mpeg: " fmt, dev->core->name, ## arg); \ +} while(0) + +#define mpeg_dbg(level, fmt, arg...) do { \ + if (debug + 1 > level) \ + printk(KERN_DEBUG "%s/2-mpeg: " fmt, core->name, ## arg); \ +} while(0) + +#if defined(CONFIG_MODULES) && defined(MODULE) +static void request_module_async(struct work_struct *work) +{ + struct cx8802_dev *dev=container_of(work, struct cx8802_dev, request_module_wk); + + if (dev->core->board.mpeg & CX88_MPEG_DVB) + request_module("cx88-dvb"); + if (dev->core->board.mpeg & CX88_MPEG_BLACKBIRD) + request_module("cx88-blackbird"); +} + +static void request_modules(struct cx8802_dev *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_modules(struct cx8802_dev *dev) +{ + flush_work(&dev->request_module_wk); +} +#else +#define request_modules(dev) +#define flush_request_modules(dev) +#endif /* CONFIG_MODULES */ + + +static LIST_HEAD(cx8802_devlist); +static DEFINE_MUTEX(cx8802_mutex); +/* ------------------------------------------------------------------ */ + +static int cx8802_start_dma(struct cx8802_dev *dev, + struct cx88_dmaqueue *q, + struct cx88_buffer *buf) +{ + struct cx88_core *core = dev->core; + + dprintk(1, "cx8802_start_dma w: %d, h: %d, f: %d\n", + buf->vb.width, buf->vb.height, buf->vb.field); + + /* setup fifo + format */ + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH28], + dev->ts_packet_size, buf->risc.dma); + + /* write TS length to chip */ + cx_write(MO_TS_LNGTH, buf->vb.width); + + /* FIXME: this needs a review. + * also: move to cx88-blackbird + cx88-dvb source files? */ + + dprintk( 1, "core->active_type_id = 0x%08x\n", core->active_type_id); + + if ( (core->active_type_id == CX88_MPEG_DVB) && + (core->board.mpeg & CX88_MPEG_DVB) ) { + + dprintk( 1, "cx8802_start_dma doing .dvb\n"); + /* negedge driven & software reset */ + cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl); + udelay(100); + cx_write(MO_PINMUX_IO, 0x00); + cx_write(TS_HW_SOP_CNTRL, 0x47<<16|188<<4|0x01); + switch (core->boardnr) { + case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q: + case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T: + case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: + case CX88_BOARD_PCHDTV_HD5500: + cx_write(TS_SOP_STAT, 1<<13); + break; + case CX88_BOARD_SAMSUNG_SMT_7020: + cx_write(TS_SOP_STAT, 0x00); + break; + case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: + case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: + cx_write(MO_PINMUX_IO, 0x88); /* Enable MPEG parallel IO and video signal pins */ + udelay(100); + break; + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* Enable MPEG parallel IO and video signal pins */ + cx_write(MO_PINMUX_IO, 0x88); + cx_write(TS_SOP_STAT, 0); + cx_write(TS_VALERR_CNTRL, 0); + break; + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + /* Enable MPEG parallel IO and video signal pins */ + cx_write(MO_PINMUX_IO, 0x88); + cx_write(TS_HW_SOP_CNTRL, (0x47 << 16) | (188 << 4)); + dev->ts_gen_cntrl = 5; + cx_write(TS_SOP_STAT, 0); + cx_write(TS_VALERR_CNTRL, 0); + udelay(100); + break; + default: + cx_write(TS_SOP_STAT, 0x00); + break; + } + cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl); + udelay(100); + } else if ( (core->active_type_id == CX88_MPEG_BLACKBIRD) && + (core->board.mpeg & CX88_MPEG_BLACKBIRD) ) { + dprintk( 1, "cx8802_start_dma doing .blackbird\n"); + cx_write(MO_PINMUX_IO, 0x88); /* enable MPEG parallel IO */ + + cx_write(TS_GEN_CNTRL, 0x46); /* punctured clock TS & posedge driven & software reset */ + udelay(100); + + cx_write(TS_HW_SOP_CNTRL, 0x408); /* mpeg start byte */ + cx_write(TS_VALERR_CNTRL, 0x2000); + + cx_write(TS_GEN_CNTRL, 0x06); /* punctured clock TS & posedge driven */ + udelay(100); + } else { + printk( "%s() Failed. Unsupported value in .mpeg (0x%08x)\n", __func__, + core->board.mpeg ); + return -EINVAL; + } + + /* reset counter */ + cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET); + q->count = 1; + + /* enable irqs */ + dprintk( 1, "setting the interrupt mask\n" ); + cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT); + cx_set(MO_TS_INTMSK, 0x1f0011); + + /* start dma */ + cx_set(MO_DEV_CNTRL2, (1<<5)); + cx_set(MO_TS_DMACNTRL, 0x11); + return 0; +} + +static int cx8802_stop_dma(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + dprintk( 1, "cx8802_stop_dma\n" ); + + /* stop dma */ + cx_clear(MO_TS_DMACNTRL, 0x11); + + /* disable irqs */ + cx_clear(MO_PCI_INTMSK, PCI_INT_TSINT); + cx_clear(MO_TS_INTMSK, 0x1f0011); + + /* Reset the controller */ + cx_write(TS_GEN_CNTRL, 0xcd); + return 0; +} + +static int cx8802_restart_queue(struct cx8802_dev *dev, + struct cx88_dmaqueue *q) +{ + struct cx88_buffer *buf; + + dprintk( 1, "cx8802_restart_queue\n" ); + if (list_empty(&q->active)) + { + struct cx88_buffer *prev; + prev = NULL; + + dprintk(1, "cx8802_restart_queue: queue is empty\n" ); + + for (;;) { + if (list_empty(&q->queued)) + return 0; + buf = list_entry(q->queued.next, struct cx88_buffer, vb.queue); + if (NULL == prev) { + list_move_tail(&buf->vb.queue, &q->active); + cx8802_start_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(1,"[%p/%d] restart_queue - first active\n", + buf,buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_move_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + dprintk(1,"[%p/%d] restart_queue - move to active\n", + buf,buf->vb.i); + } else { + return 0; + } + prev = buf; + } + return 0; + } + + buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); + dprintk(2,"restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx8802_start_dma(dev, q, buf); + list_for_each_entry(buf, &q->active, vb.queue) + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + return 0; +} + +/* ------------------------------------------------------------------ */ + +int cx8802_buf_prepare(struct videobuf_queue *q, struct cx8802_dev *dev, + struct cx88_buffer *buf, enum v4l2_field field) +{ + int size = dev->ts_packet_size * dev->ts_packet_count; + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + int rc; + + dprintk(1, "%s: %p\n", __func__, buf); + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + buf->vb.width = dev->ts_packet_size; + buf->vb.height = dev->ts_packet_count; + buf->vb.size = size; + buf->vb.field = field /*V4L2_FIELD_TOP*/; + + if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL))) + goto fail; + cx88_risc_databuffer(dev->pci, &buf->risc, + dma->sglist, + buf->vb.width, buf->vb.height, 0); + } + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx88_free_buffer(q,buf); + return rc; +} + +void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf) +{ + struct cx88_buffer *prev; + struct cx88_dmaqueue *cx88q = &dev->mpegq; + + dprintk( 1, "cx8802_buf_queue\n" ); + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(cx88q->stopper.dma); + + if (list_empty(&cx88q->active)) { + dprintk( 1, "queue is empty - first active\n" ); + list_add_tail(&buf->vb.queue,&cx88q->active); + cx8802_start_dma(dev, cx88q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = cx88q->count++; + mod_timer(&cx88q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(1,"[%p/%d] %s - first active\n", + buf, buf->vb.i, __func__); + + } else { + dprintk( 1, "queue is not empty - append to active\n" ); + prev = list_entry(cx88q->active.prev, struct cx88_buffer, vb.queue); + list_add_tail(&buf->vb.queue,&cx88q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = cx88q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + dprintk( 1, "[%p/%d] %s - append to active\n", + buf, buf->vb.i, __func__); + } +} + +/* ----------------------------------------------------------- */ + +static void do_cancel_buffers(struct cx8802_dev *dev, const char *reason, int restart) +{ + struct cx88_dmaqueue *q = &dev->mpegq; + struct cx88_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&dev->slock,flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + dprintk(1,"[%p/%d] %s - dma=0x%08lx\n", + buf, buf->vb.i, reason, (unsigned long)buf->risc.dma); + } + if (restart) + { + dprintk(1, "restarting queue\n" ); + cx8802_restart_queue(dev,q); + } + spin_unlock_irqrestore(&dev->slock,flags); +} + +void cx8802_cancel_buffers(struct cx8802_dev *dev) +{ + struct cx88_dmaqueue *q = &dev->mpegq; + + dprintk( 1, "cx8802_cancel_buffers" ); + del_timer_sync(&q->timeout); + cx8802_stop_dma(dev); + do_cancel_buffers(dev,"cancel",0); +} + +static void cx8802_timeout(unsigned long data) +{ + struct cx8802_dev *dev = (struct cx8802_dev*)data; + + dprintk(1, "%s\n",__func__); + + if (debug) + cx88_sram_channel_dump(dev->core, &cx88_sram_channels[SRAM_CH28]); + cx8802_stop_dma(dev); + do_cancel_buffers(dev,"timeout",1); +} + +static const char * cx88_mpeg_irqs[32] = { + "ts_risci1", NULL, NULL, NULL, + "ts_risci2", NULL, NULL, NULL, + "ts_oflow", NULL, NULL, NULL, + "ts_sync", NULL, NULL, NULL, + "opc_err", "par_err", "rip_err", "pci_abort", + "ts_err?", +}; + +static void cx8802_mpeg_irq(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + u32 status, mask, count; + + dprintk( 1, "cx8802_mpeg_irq\n" ); + status = cx_read(MO_TS_INTSTAT); + mask = cx_read(MO_TS_INTMSK); + if (0 == (status & mask)) + return; + + cx_write(MO_TS_INTSTAT, status); + + if (debug || (status & mask & ~0xff)) + cx88_print_irqbits(core->name, "irq mpeg ", + cx88_mpeg_irqs, ARRAY_SIZE(cx88_mpeg_irqs), + status, mask); + + /* risc op code error */ + if (status & (1 << 16)) { + printk(KERN_WARNING "%s: mpeg risc op code error\n",core->name); + cx_clear(MO_TS_DMACNTRL, 0x11); + cx88_sram_channel_dump(dev->core, &cx88_sram_channels[SRAM_CH28]); + } + + /* risc1 y */ + if (status & 0x01) { + dprintk( 1, "wake up\n" ); + spin_lock(&dev->slock); + count = cx_read(MO_TS_GPCNT); + cx88_wakeup(dev->core, &dev->mpegq, count); + spin_unlock(&dev->slock); + } + + /* risc2 y */ + if (status & 0x10) { + spin_lock(&dev->slock); + cx8802_restart_queue(dev,&dev->mpegq); + spin_unlock(&dev->slock); + } + + /* other general errors */ + if (status & 0x1f0100) { + dprintk( 0, "general errors: 0x%08x\n", status & 0x1f0100 ); + spin_lock(&dev->slock); + cx8802_stop_dma(dev); + cx8802_restart_queue(dev,&dev->mpegq); + spin_unlock(&dev->slock); + } +} + +#define MAX_IRQ_LOOP 10 + +static irqreturn_t cx8802_irq(int irq, void *dev_id) +{ + struct cx8802_dev *dev = dev_id; + struct cx88_core *core = dev->core; + u32 status; + int loop, handled = 0; + + for (loop = 0; loop < MAX_IRQ_LOOP; loop++) { + status = cx_read(MO_PCI_INTSTAT) & + (core->pci_irqmask | PCI_INT_TSINT); + if (0 == status) + goto out; + dprintk( 1, "cx8802_irq\n" ); + dprintk( 1, " loop: %d/%d\n", loop, MAX_IRQ_LOOP ); + dprintk( 1, " status: %d\n", status ); + handled = 1; + cx_write(MO_PCI_INTSTAT, status); + + if (status & core->pci_irqmask) + cx88_core_irq(core,status); + if (status & PCI_INT_TSINT) + cx8802_mpeg_irq(dev); + } + if (MAX_IRQ_LOOP == loop) { + dprintk( 0, "clearing mask\n" ); + printk(KERN_WARNING "%s/0: irq loop -- clearing mask\n", + core->name); + cx_write(MO_PCI_INTMSK,0); + } + + out: + return IRQ_RETVAL(handled); +} + +static int cx8802_init_common(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + int err; + + /* pci init */ + if (pci_enable_device(dev->pci)) + return -EIO; + pci_set_master(dev->pci); + if (!pci_dma_supported(dev->pci,DMA_BIT_MASK(32))) { + printk("%s/2: Oops: no 32bit PCI DMA ???\n",dev->core->name); + return -EIO; + } + + dev->pci_rev = dev->pci->revision; + pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", dev->core->name, + pci_name(dev->pci), dev->pci_rev, dev->pci->irq, + dev->pci_lat,(unsigned long long)pci_resource_start(dev->pci,0)); + + /* initialize driver struct */ + spin_lock_init(&dev->slock); + + /* init dma queue */ + INIT_LIST_HEAD(&dev->mpegq.active); + INIT_LIST_HEAD(&dev->mpegq.queued); + dev->mpegq.timeout.function = cx8802_timeout; + dev->mpegq.timeout.data = (unsigned long)dev; + init_timer(&dev->mpegq.timeout); + cx88_risc_stopper(dev->pci,&dev->mpegq.stopper, + MO_TS_DMACNTRL,0x11,0x00); + + /* get irq */ + err = request_irq(dev->pci->irq, cx8802_irq, + IRQF_SHARED | IRQF_DISABLED, dev->core->name, dev); + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d\n", + dev->core->name, dev->pci->irq); + return err; + } + cx_set(MO_PCI_INTMSK, core->pci_irqmask); + + /* everything worked */ + pci_set_drvdata(dev->pci,dev); + return 0; +} + +static void cx8802_fini_common(struct cx8802_dev *dev) +{ + dprintk( 2, "cx8802_fini_common\n" ); + cx8802_stop_dma(dev); + pci_disable_device(dev->pci); + + /* unregister stuff */ + free_irq(dev->pci->irq, dev); + pci_set_drvdata(dev->pci, NULL); + + /* free memory */ + btcx_riscmem_free(dev->pci,&dev->mpegq.stopper); +} + +/* ----------------------------------------------------------- */ + +static int cx8802_suspend_common(struct pci_dev *pci_dev, pm_message_t state) +{ + struct cx8802_dev *dev = pci_get_drvdata(pci_dev); + struct cx88_core *core = dev->core; + unsigned long flags; + + /* stop mpeg dma */ + spin_lock_irqsave(&dev->slock, flags); + if (!list_empty(&dev->mpegq.active)) { + dprintk( 2, "suspend\n" ); + printk("%s: suspend mpeg\n", core->name); + cx8802_stop_dma(dev); + del_timer(&dev->mpegq.timeout); + } + spin_unlock_irqrestore(&dev->slock, flags); + + /* FIXME -- shutdown device */ + cx88_shutdown(dev->core); + + pci_save_state(pci_dev); + if (0 != pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state))) { + pci_disable_device(pci_dev); + dev->state.disabled = 1; + } + return 0; +} + +static int cx8802_resume_common(struct pci_dev *pci_dev) +{ + struct cx8802_dev *dev = pci_get_drvdata(pci_dev); + struct cx88_core *core = dev->core; + unsigned long flags; + int err; + + if (dev->state.disabled) { + err=pci_enable_device(pci_dev); + if (err) { + printk(KERN_ERR "%s: can't enable device\n", + dev->core->name); + return err; + } + dev->state.disabled = 0; + } + err=pci_set_power_state(pci_dev, PCI_D0); + if (err) { + printk(KERN_ERR "%s: can't enable device\n", + dev->core->name); + pci_disable_device(pci_dev); + dev->state.disabled = 1; + + return err; + } + pci_restore_state(pci_dev); + + /* FIXME: re-initialize hardware */ + cx88_reset(dev->core); + + /* restart video+vbi capture */ + spin_lock_irqsave(&dev->slock, flags); + if (!list_empty(&dev->mpegq.active)) { + printk("%s: resume mpeg\n", core->name); + cx8802_restart_queue(dev,&dev->mpegq); + } + spin_unlock_irqrestore(&dev->slock, flags); + + return 0; +} + +struct cx8802_driver * cx8802_get_driver(struct cx8802_dev *dev, enum cx88_board_type btype) +{ + struct cx8802_driver *d; + + list_for_each_entry(d, &dev->drvlist, drvlist) + if (d->type_id == btype) + return d; + + return NULL; +} + +/* Driver asked for hardware access. */ +static int cx8802_request_acquire(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + unsigned int i; + + /* Fail a request for hardware if the device is busy. */ + if (core->active_type_id != CX88_BOARD_NONE && + core->active_type_id != drv->type_id) + return -EBUSY; + + if (drv->type_id == CX88_MPEG_DVB) { + /* When switching to DVB, always set the input to the tuner */ + core->last_analog_input = core->input; + core->input = 0; + for (i = 0; + i < (sizeof(core->board.input) / sizeof(struct cx88_input)); + i++) { + if (core->board.input[i].type == CX88_VMUX_DVB) { + core->input = i; + break; + } + } + } + + if (drv->advise_acquire) + { + core->active_ref++; + if (core->active_type_id == CX88_BOARD_NONE) { + core->active_type_id = drv->type_id; + drv->advise_acquire(drv); + } + + mpeg_dbg(1,"%s() Post acquire GPIO=%x\n", __func__, cx_read(MO_GP0_IO)); + } + + return 0; +} + +/* Driver asked to release hardware. */ +static int cx8802_request_release(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + + if (drv->advise_release && --core->active_ref == 0) + { + if (drv->type_id == CX88_MPEG_DVB) { + /* If the DVB driver is releasing, reset the input + state to the last configured analog input */ + core->input = core->last_analog_input; + } + + drv->advise_release(drv); + core->active_type_id = CX88_BOARD_NONE; + mpeg_dbg(1,"%s() Post release GPIO=%x\n", __func__, cx_read(MO_GP0_IO)); + } + + return 0; +} + +static int cx8802_check_driver(struct cx8802_driver *drv) +{ + if (drv == NULL) + return -ENODEV; + + if ((drv->type_id != CX88_MPEG_DVB) && + (drv->type_id != CX88_MPEG_BLACKBIRD)) + return -EINVAL; + + if ((drv->hw_access != CX8802_DRVCTL_SHARED) && + (drv->hw_access != CX8802_DRVCTL_EXCLUSIVE)) + return -EINVAL; + + if ((drv->probe == NULL) || + (drv->remove == NULL) || + (drv->advise_acquire == NULL) || + (drv->advise_release == NULL)) + return -EINVAL; + + return 0; +} + +int cx8802_register_driver(struct cx8802_driver *drv) +{ + struct cx8802_dev *dev; + struct cx8802_driver *driver; + int err, i = 0; + + printk(KERN_INFO + "cx88/2: registering cx8802 driver, type: %s access: %s\n", + drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird", + drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive"); + + if ((err = cx8802_check_driver(drv)) != 0) { + printk(KERN_ERR "cx88/2: cx8802_driver is invalid\n"); + return err; + } + + mutex_lock(&cx8802_mutex); + + list_for_each_entry(dev, &cx8802_devlist, devlist) { + printk(KERN_INFO + "%s/2: subsystem: %04x:%04x, board: %s [card=%d]\n", + dev->core->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device, dev->core->board.name, + dev->core->boardnr); + + /* Bring up a new struct for each driver instance */ + driver = kzalloc(sizeof(*drv),GFP_KERNEL); + if (driver == NULL) { + err = -ENOMEM; + goto out; + } + + /* Snapshot of the driver registration data */ + drv->core = dev->core; + drv->suspend = cx8802_suspend_common; + drv->resume = cx8802_resume_common; + drv->request_acquire = cx8802_request_acquire; + drv->request_release = cx8802_request_release; + memcpy(driver, drv, sizeof(*driver)); + + mutex_lock(&drv->core->lock); + err = drv->probe(driver); + if (err == 0) { + i++; + list_add_tail(&driver->drvlist, &dev->drvlist); + } else { + printk(KERN_ERR + "%s/2: cx8802 probe failed, err = %d\n", + dev->core->name, err); + } + mutex_unlock(&drv->core->lock); + } + + err = i ? 0 : -ENODEV; +out: + mutex_unlock(&cx8802_mutex); + return err; +} + +int cx8802_unregister_driver(struct cx8802_driver *drv) +{ + struct cx8802_dev *dev; + struct cx8802_driver *d, *dtmp; + int err = 0; + + printk(KERN_INFO + "cx88/2: unregistering cx8802 driver, type: %s access: %s\n", + drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird", + drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive"); + + mutex_lock(&cx8802_mutex); + + list_for_each_entry(dev, &cx8802_devlist, devlist) { + printk(KERN_INFO + "%s/2: subsystem: %04x:%04x, board: %s [card=%d]\n", + dev->core->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device, dev->core->board.name, + dev->core->boardnr); + + mutex_lock(&dev->core->lock); + + list_for_each_entry_safe(d, dtmp, &dev->drvlist, drvlist) { + /* only unregister the correct driver type */ + if (d->type_id != drv->type_id) + continue; + + err = d->remove(d); + if (err == 0) { + list_del(&d->drvlist); + kfree(d); + } else + printk(KERN_ERR "%s/2: cx8802 driver remove " + "failed (%d)\n", dev->core->name, err); + } + + mutex_unlock(&dev->core->lock); + } + + mutex_unlock(&cx8802_mutex); + + return err; +} + +/* ----------------------------------------------------------- */ +static int cx8802_probe(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct cx8802_dev *dev; + struct cx88_core *core; + int err; + + /* general setup */ + core = cx88_core_get(pci_dev); + if (NULL == core) + return -EINVAL; + + printk("%s/2: cx2388x 8802 Driver Manager\n", core->name); + + err = -ENODEV; + if (!core->board.mpeg) + goto fail_core; + + err = -ENOMEM; + dev = kzalloc(sizeof(*dev),GFP_KERNEL); + if (NULL == dev) + goto fail_core; + dev->pci = pci_dev; + dev->core = core; + + /* Maintain a reference so cx88-video can query the 8802 device. */ + core->dvbdev = dev; + + err = cx8802_init_common(dev); + if (err != 0) + goto fail_free; + + INIT_LIST_HEAD(&dev->drvlist); + mutex_lock(&cx8802_mutex); + list_add_tail(&dev->devlist,&cx8802_devlist); + mutex_unlock(&cx8802_mutex); + + /* now autoload cx88-dvb or cx88-blackbird */ + request_modules(dev); + return 0; + + fail_free: + kfree(dev); + fail_core: + core->dvbdev = NULL; + cx88_core_put(core,pci_dev); + return err; +} + +static void cx8802_remove(struct pci_dev *pci_dev) +{ + struct cx8802_dev *dev; + + dev = pci_get_drvdata(pci_dev); + + dprintk( 1, "%s\n", __func__); + + flush_request_modules(dev); + + mutex_lock(&dev->core->lock); + + if (!list_empty(&dev->drvlist)) { + struct cx8802_driver *drv, *tmp; + int err; + + printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver " + "while cx8802 sub-drivers still loaded?!\n", + dev->core->name); + + list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) { + err = drv->remove(drv); + if (err == 0) { + list_del(&drv->drvlist); + } else + printk(KERN_ERR "%s/2: cx8802 driver remove " + "failed (%d)\n", dev->core->name, err); + kfree(drv); + } + } + + mutex_unlock(&dev->core->lock); + + /* Destroy any 8802 reference. */ + dev->core->dvbdev = NULL; + + /* common */ + cx8802_fini_common(dev); + cx88_core_put(dev->core,dev->pci); + kfree(dev); +} + +static const struct pci_device_id cx8802_pci_tbl[] = { + { + .vendor = 0x14f1, + .device = 0x8802, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + },{ + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl); + +static struct pci_driver cx8802_pci_driver = { + .name = "cx88-mpeg driver manager", + .id_table = cx8802_pci_tbl, + .probe = cx8802_probe, + .remove = cx8802_remove, +}; + +static int __init cx8802_init(void) +{ + printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %s loaded\n", + CX88_VERSION); + return pci_register_driver(&cx8802_pci_driver); +} + +static void __exit cx8802_fini(void) +{ + pci_unregister_driver(&cx8802_pci_driver); +} + +module_init(cx8802_init); +module_exit(cx8802_fini); +EXPORT_SYMBOL(cx8802_buf_prepare); +EXPORT_SYMBOL(cx8802_buf_queue); +EXPORT_SYMBOL(cx8802_cancel_buffers); + +EXPORT_SYMBOL(cx8802_register_driver); +EXPORT_SYMBOL(cx8802_unregister_driver); +EXPORT_SYMBOL(cx8802_get_driver); +/* ----------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off + */ diff --git a/drivers/media/pci/cx88/cx88-reg.h b/drivers/media/pci/cx88/cx88-reg.h new file mode 100644 index 00000000..2ec52d1c --- /dev/null +++ b/drivers/media/pci/cx88/cx88-reg.h @@ -0,0 +1,836 @@ +/* + + cx88x-hw.h - CX2388x register offsets + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + 2001 Michael Eskin + 2002 Yurij Sysoev + 2003 Gerd Knorr + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _CX88_REG_H_ +#define _CX88_REG_H_ + +/* ---------------------------------------------------------------------- */ +/* PCI IDs and config space */ + +#ifndef PCI_VENDOR_ID_CONEXANT +# define PCI_VENDOR_ID_CONEXANT 0x14F1 +#endif +#ifndef PCI_DEVICE_ID_CX2300_VID +# define PCI_DEVICE_ID_CX2300_VID 0x8800 +#endif + +#define CX88X_DEVCTRL 0x40 +#define CX88X_EN_TBFX 0x02 +#define CX88X_EN_VSFX 0x04 + +/* ---------------------------------------------------------------------- */ +/* PCI controller registers */ + +/* Command and Status Register */ +#define F0_CMD_STAT_MM 0x2f0004 +#define F1_CMD_STAT_MM 0x2f0104 +#define F2_CMD_STAT_MM 0x2f0204 +#define F3_CMD_STAT_MM 0x2f0304 +#define F4_CMD_STAT_MM 0x2f0404 + +/* Device Control #1 */ +#define F0_DEV_CNTRL1_MM 0x2f0040 +#define F1_DEV_CNTRL1_MM 0x2f0140 +#define F2_DEV_CNTRL1_MM 0x2f0240 +#define F3_DEV_CNTRL1_MM 0x2f0340 +#define F4_DEV_CNTRL1_MM 0x2f0440 + +/* Device Control #1 */ +#define F0_BAR0_MM 0x2f0010 +#define F1_BAR0_MM 0x2f0110 +#define F2_BAR0_MM 0x2f0210 +#define F3_BAR0_MM 0x2f0310 +#define F4_BAR0_MM 0x2f0410 + +/* ---------------------------------------------------------------------- */ +/* DMA Controller registers */ + +#define MO_PDMA_STHRSH 0x200000 // Source threshold +#define MO_PDMA_STADRS 0x200004 // Source target address +#define MO_PDMA_SIADRS 0x200008 // Source internal address +#define MO_PDMA_SCNTRL 0x20000C // Source control +#define MO_PDMA_DTHRSH 0x200010 // Destination threshold +#define MO_PDMA_DTADRS 0x200014 // Destination target address +#define MO_PDMA_DIADRS 0x200018 // Destination internal address +#define MO_PDMA_DCNTRL 0x20001C // Destination control +#define MO_LD_SSID 0x200030 // Load subsystem ID +#define MO_DEV_CNTRL2 0x200034 // Device control +#define MO_PCI_INTMSK 0x200040 // PCI interrupt mask +#define MO_PCI_INTSTAT 0x200044 // PCI interrupt status +#define MO_PCI_INTMSTAT 0x200048 // PCI interrupt masked status +#define MO_VID_INTMSK 0x200050 // Video interrupt mask +#define MO_VID_INTSTAT 0x200054 // Video interrupt status +#define MO_VID_INTMSTAT 0x200058 // Video interrupt masked status +#define MO_VID_INTSSTAT 0x20005C // Video interrupt set status +#define MO_AUD_INTMSK 0x200060 // Audio interrupt mask +#define MO_AUD_INTSTAT 0x200064 // Audio interrupt status +#define MO_AUD_INTMSTAT 0x200068 // Audio interrupt masked status +#define MO_AUD_INTSSTAT 0x20006C // Audio interrupt set status +#define MO_TS_INTMSK 0x200070 // Transport stream interrupt mask +#define MO_TS_INTSTAT 0x200074 // Transport stream interrupt status +#define MO_TS_INTMSTAT 0x200078 // Transport stream interrupt mask status +#define MO_TS_INTSSTAT 0x20007C // Transport stream interrupt set status +#define MO_VIP_INTMSK 0x200080 // VIP interrupt mask +#define MO_VIP_INTSTAT 0x200084 // VIP interrupt status +#define MO_VIP_INTMSTAT 0x200088 // VIP interrupt masked status +#define MO_VIP_INTSSTAT 0x20008C // VIP interrupt set status +#define MO_GPHST_INTMSK 0x200090 // Host interrupt mask +#define MO_GPHST_INTSTAT 0x200094 // Host interrupt status +#define MO_GPHST_INTMSTAT 0x200098 // Host interrupt masked status +#define MO_GPHST_INTSSTAT 0x20009C // Host interrupt set status + +// DMA Channels 1-6 belong to SPIPE +#define MO_DMA7_PTR1 0x300018 // {24}RW* DMA Current Ptr : Ch#7 +#define MO_DMA8_PTR1 0x30001C // {24}RW* DMA Current Ptr : Ch#8 + +// DMA Channels 9-20 belong to SPIPE +#define MO_DMA21_PTR1 0x300080 // {24}R0* DMA Current Ptr : Ch#21 +#define MO_DMA22_PTR1 0x300084 // {24}R0* DMA Current Ptr : Ch#22 +#define MO_DMA23_PTR1 0x300088 // {24}R0* DMA Current Ptr : Ch#23 +#define MO_DMA24_PTR1 0x30008C // {24}R0* DMA Current Ptr : Ch#24 +#define MO_DMA25_PTR1 0x300090 // {24}R0* DMA Current Ptr : Ch#25 +#define MO_DMA26_PTR1 0x300094 // {24}R0* DMA Current Ptr : Ch#26 +#define MO_DMA27_PTR1 0x300098 // {24}R0* DMA Current Ptr : Ch#27 +#define MO_DMA28_PTR1 0x30009C // {24}R0* DMA Current Ptr : Ch#28 +#define MO_DMA29_PTR1 0x3000A0 // {24}R0* DMA Current Ptr : Ch#29 +#define MO_DMA30_PTR1 0x3000A4 // {24}R0* DMA Current Ptr : Ch#30 +#define MO_DMA31_PTR1 0x3000A8 // {24}R0* DMA Current Ptr : Ch#31 +#define MO_DMA32_PTR1 0x3000AC // {24}R0* DMA Current Ptr : Ch#32 + +#define MO_DMA21_PTR2 0x3000C0 // {24}RW* DMA Tab Ptr : Ch#21 +#define MO_DMA22_PTR2 0x3000C4 // {24}RW* DMA Tab Ptr : Ch#22 +#define MO_DMA23_PTR2 0x3000C8 // {24}RW* DMA Tab Ptr : Ch#23 +#define MO_DMA24_PTR2 0x3000CC // {24}RW* DMA Tab Ptr : Ch#24 +#define MO_DMA25_PTR2 0x3000D0 // {24}RW* DMA Tab Ptr : Ch#25 +#define MO_DMA26_PTR2 0x3000D4 // {24}RW* DMA Tab Ptr : Ch#26 +#define MO_DMA27_PTR2 0x3000D8 // {24}RW* DMA Tab Ptr : Ch#27 +#define MO_DMA28_PTR2 0x3000DC // {24}RW* DMA Tab Ptr : Ch#28 +#define MO_DMA29_PTR2 0x3000E0 // {24}RW* DMA Tab Ptr : Ch#29 +#define MO_DMA30_PTR2 0x3000E4 // {24}RW* DMA Tab Ptr : Ch#30 +#define MO_DMA31_PTR2 0x3000E8 // {24}RW* DMA Tab Ptr : Ch#31 +#define MO_DMA32_PTR2 0x3000EC // {24}RW* DMA Tab Ptr : Ch#32 + +#define MO_DMA21_CNT1 0x300100 // {11}RW* DMA Buffer Size : Ch#21 +#define MO_DMA22_CNT1 0x300104 // {11}RW* DMA Buffer Size : Ch#22 +#define MO_DMA23_CNT1 0x300108 // {11}RW* DMA Buffer Size : Ch#23 +#define MO_DMA24_CNT1 0x30010C // {11}RW* DMA Buffer Size : Ch#24 +#define MO_DMA25_CNT1 0x300110 // {11}RW* DMA Buffer Size : Ch#25 +#define MO_DMA26_CNT1 0x300114 // {11}RW* DMA Buffer Size : Ch#26 +#define MO_DMA27_CNT1 0x300118 // {11}RW* DMA Buffer Size : Ch#27 +#define MO_DMA28_CNT1 0x30011C // {11}RW* DMA Buffer Size : Ch#28 +#define MO_DMA29_CNT1 0x300120 // {11}RW* DMA Buffer Size : Ch#29 +#define MO_DMA30_CNT1 0x300124 // {11}RW* DMA Buffer Size : Ch#30 +#define MO_DMA31_CNT1 0x300128 // {11}RW* DMA Buffer Size : Ch#31 +#define MO_DMA32_CNT1 0x30012C // {11}RW* DMA Buffer Size : Ch#32 + +#define MO_DMA21_CNT2 0x300140 // {11}RW* DMA Table Size : Ch#21 +#define MO_DMA22_CNT2 0x300144 // {11}RW* DMA Table Size : Ch#22 +#define MO_DMA23_CNT2 0x300148 // {11}RW* DMA Table Size : Ch#23 +#define MO_DMA24_CNT2 0x30014C // {11}RW* DMA Table Size : Ch#24 +#define MO_DMA25_CNT2 0x300150 // {11}RW* DMA Table Size : Ch#25 +#define MO_DMA26_CNT2 0x300154 // {11}RW* DMA Table Size : Ch#26 +#define MO_DMA27_CNT2 0x300158 // {11}RW* DMA Table Size : Ch#27 +#define MO_DMA28_CNT2 0x30015C // {11}RW* DMA Table Size : Ch#28 +#define MO_DMA29_CNT2 0x300160 // {11}RW* DMA Table Size : Ch#29 +#define MO_DMA30_CNT2 0x300164 // {11}RW* DMA Table Size : Ch#30 +#define MO_DMA31_CNT2 0x300168 // {11}RW* DMA Table Size : Ch#31 +#define MO_DMA32_CNT2 0x30016C // {11}RW* DMA Table Size : Ch#32 + + +/* ---------------------------------------------------------------------- */ +/* Video registers */ + +#define MO_VIDY_DMA 0x310000 // {64}RWp Video Y +#define MO_VIDU_DMA 0x310008 // {64}RWp Video U +#define MO_VIDV_DMA 0x310010 // {64}RWp Video V +#define MO_VBI_DMA 0x310018 // {64}RWp VBI (Vertical blanking interval) + +#define MO_DEVICE_STATUS 0x310100 +#define MO_INPUT_FORMAT 0x310104 +#define MO_AGC_BURST 0x31010c +#define MO_CONTR_BRIGHT 0x310110 +#define MO_UV_SATURATION 0x310114 +#define MO_HUE 0x310118 +#define MO_HTOTAL 0x310120 +#define MO_HDELAY_EVEN 0x310124 +#define MO_HDELAY_ODD 0x310128 +#define MO_VDELAY_ODD 0x31012c +#define MO_VDELAY_EVEN 0x310130 +#define MO_HACTIVE_EVEN 0x31013c +#define MO_HACTIVE_ODD 0x310140 +#define MO_VACTIVE_EVEN 0x310144 +#define MO_VACTIVE_ODD 0x310148 +#define MO_HSCALE_EVEN 0x31014c +#define MO_HSCALE_ODD 0x310150 +#define MO_VSCALE_EVEN 0x310154 +#define MO_FILTER_EVEN 0x31015c +#define MO_VSCALE_ODD 0x310158 +#define MO_FILTER_ODD 0x310160 +#define MO_OUTPUT_FORMAT 0x310164 + +#define MO_PLL_REG 0x310168 // PLL register +#define MO_PLL_ADJ_CTRL 0x31016c // PLL adjust control register +#define MO_SCONV_REG 0x310170 // sample rate conversion register +#define MO_SCONV_FIFO 0x310174 // sample rate conversion fifo +#define MO_SUB_STEP 0x310178 // subcarrier step size +#define MO_SUB_STEP_DR 0x31017c // subcarrier step size for DR line + +#define MO_CAPTURE_CTRL 0x310180 // capture control +#define MO_COLOR_CTRL 0x310184 +#define MO_VBI_PACKET 0x310188 // vbi packet size / delay +#define MO_FIELD_COUNT 0x310190 // field counter +#define MO_VIP_CONFIG 0x310194 +#define MO_VBOS_CONTROL 0x3101a8 + +#define MO_AGC_BACK_VBI 0x310200 +#define MO_AGC_SYNC_TIP1 0x310208 + +#define MO_VIDY_GPCNT 0x31C020 // {16}RO Video Y general purpose counter +#define MO_VIDU_GPCNT 0x31C024 // {16}RO Video U general purpose counter +#define MO_VIDV_GPCNT 0x31C028 // {16}RO Video V general purpose counter +#define MO_VBI_GPCNT 0x31C02C // {16}RO VBI general purpose counter +#define MO_VIDY_GPCNTRL 0x31C030 // {2}WO Video Y general purpose control +#define MO_VIDU_GPCNTRL 0x31C034 // {2}WO Video U general purpose control +#define MO_VIDV_GPCNTRL 0x31C038 // {2}WO Video V general purpose control +#define MO_VBI_GPCNTRL 0x31C03C // {2}WO VBI general purpose counter +#define MO_VID_DMACNTRL 0x31C040 // {8}RW Video DMA control +#define MO_VID_XFR_STAT 0x31C044 // {1}RO Video transfer status + + +/* ---------------------------------------------------------------------- */ +/* audio registers */ + +#define MO_AUDD_DMA 0x320000 // {64}RWp Audio downstream +#define MO_AUDU_DMA 0x320008 // {64}RWp Audio upstream +#define MO_AUDR_DMA 0x320010 // {64}RWp Audio RDS (downstream) +#define MO_AUDD_GPCNT 0x32C020 // {16}RO Audio down general purpose counter +#define MO_AUDU_GPCNT 0x32C024 // {16}RO Audio up general purpose counter +#define MO_AUDR_GPCNT 0x32C028 // {16}RO Audio RDS general purpose counter +#define MO_AUDD_GPCNTRL 0x32C030 // {2}WO Audio down general purpose control +#define MO_AUDU_GPCNTRL 0x32C034 // {2}WO Audio up general purpose control +#define MO_AUDR_GPCNTRL 0x32C038 // {2}WO Audio RDS general purpose control +#define MO_AUD_DMACNTRL 0x32C040 // {6}RW Audio DMA control +#define MO_AUD_XFR_STAT 0x32C044 // {1}RO Audio transfer status +#define MO_AUDD_LNGTH 0x32C048 // {12}RW Audio down line length +#define MO_AUDR_LNGTH 0x32C04C // {12}RW Audio RDS line length + +#define AUD_INIT 0x320100 +#define AUD_INIT_LD 0x320104 +#define AUD_SOFT_RESET 0x320108 +#define AUD_I2SINPUTCNTL 0x320120 +#define AUD_BAUDRATE 0x320124 +#define AUD_I2SOUTPUTCNTL 0x320128 +#define AAGC_HYST 0x320134 +#define AAGC_GAIN 0x320138 +#define AAGC_DEF 0x32013c +#define AUD_IIR1_0_SEL 0x320150 +#define AUD_IIR1_0_SHIFT 0x320154 +#define AUD_IIR1_1_SEL 0x320158 +#define AUD_IIR1_1_SHIFT 0x32015c +#define AUD_IIR1_2_SEL 0x320160 +#define AUD_IIR1_2_SHIFT 0x320164 +#define AUD_IIR1_3_SEL 0x320168 +#define AUD_IIR1_3_SHIFT 0x32016c +#define AUD_IIR1_4_SEL 0x320170 +#define AUD_IIR1_4_SHIFT 0x32017c +#define AUD_IIR1_5_SEL 0x320180 +#define AUD_IIR1_5_SHIFT 0x320184 +#define AUD_IIR2_0_SEL 0x320190 +#define AUD_IIR2_0_SHIFT 0x320194 +#define AUD_IIR2_1_SEL 0x320198 +#define AUD_IIR2_1_SHIFT 0x32019c +#define AUD_IIR2_2_SEL 0x3201a0 +#define AUD_IIR2_2_SHIFT 0x3201a4 +#define AUD_IIR2_3_SEL 0x3201a8 +#define AUD_IIR2_3_SHIFT 0x3201ac +#define AUD_IIR3_0_SEL 0x3201c0 +#define AUD_IIR3_0_SHIFT 0x3201c4 +#define AUD_IIR3_1_SEL 0x3201c8 +#define AUD_IIR3_1_SHIFT 0x3201cc +#define AUD_IIR3_2_SEL 0x3201d0 +#define AUD_IIR3_2_SHIFT 0x3201d4 +#define AUD_IIR4_0_SEL 0x3201e0 +#define AUD_IIR4_0_SHIFT 0x3201e4 +#define AUD_IIR4_1_SEL 0x3201e8 +#define AUD_IIR4_1_SHIFT 0x3201ec +#define AUD_IIR4_2_SEL 0x3201f0 +#define AUD_IIR4_2_SHIFT 0x3201f4 +#define AUD_IIR4_0_CA0 0x320200 +#define AUD_IIR4_0_CA1 0x320204 +#define AUD_IIR4_0_CA2 0x320208 +#define AUD_IIR4_0_CB0 0x32020c +#define AUD_IIR4_0_CB1 0x320210 +#define AUD_IIR4_1_CA0 0x320214 +#define AUD_IIR4_1_CA1 0x320218 +#define AUD_IIR4_1_CA2 0x32021c +#define AUD_IIR4_1_CB0 0x320220 +#define AUD_IIR4_1_CB1 0x320224 +#define AUD_IIR4_2_CA0 0x320228 +#define AUD_IIR4_2_CA1 0x32022c +#define AUD_IIR4_2_CA2 0x320230 +#define AUD_IIR4_2_CB0 0x320234 +#define AUD_IIR4_2_CB1 0x320238 +#define AUD_HP_MD_IIR4_1 0x320250 +#define AUD_HP_PROG_IIR4_1 0x320254 +#define AUD_FM_MODE_ENABLE 0x320258 +#define AUD_POLY0_DDS_CONSTANT 0x320270 +#define AUD_DN0_FREQ 0x320274 +#define AUD_DN1_FREQ 0x320278 +#define AUD_DN1_FREQ_SHIFT 0x32027c +#define AUD_DN1_AFC 0x320280 +#define AUD_DN1_SRC_SEL 0x320284 +#define AUD_DN1_SHFT 0x320288 +#define AUD_DN2_FREQ 0x32028c +#define AUD_DN2_FREQ_SHIFT 0x320290 +#define AUD_DN2_AFC 0x320294 +#define AUD_DN2_SRC_SEL 0x320298 +#define AUD_DN2_SHFT 0x32029c +#define AUD_CRDC0_SRC_SEL 0x320300 +#define AUD_CRDC0_SHIFT 0x320304 +#define AUD_CORDIC_SHIFT_0 0x320308 +#define AUD_CRDC1_SRC_SEL 0x32030c +#define AUD_CRDC1_SHIFT 0x320310 +#define AUD_CORDIC_SHIFT_1 0x320314 +#define AUD_DCOC_0_SRC 0x320320 +#define AUD_DCOC0_SHIFT 0x320324 +#define AUD_DCOC_0_SHIFT_IN0 0x320328 +#define AUD_DCOC_0_SHIFT_IN1 0x32032c +#define AUD_DCOC_1_SRC 0x320330 +#define AUD_DCOC1_SHIFT 0x320334 +#define AUD_DCOC_1_SHIFT_IN0 0x320338 +#define AUD_DCOC_1_SHIFT_IN1 0x32033c +#define AUD_DCOC_2_SRC 0x320340 +#define AUD_DCOC2_SHIFT 0x320344 +#define AUD_DCOC_2_SHIFT_IN0 0x320348 +#define AUD_DCOC_2_SHIFT_IN1 0x32034c +#define AUD_DCOC_PASS_IN 0x320350 +#define AUD_PDET_SRC 0x320370 +#define AUD_PDET_SHIFT 0x320374 +#define AUD_PILOT_BQD_1_K0 0x320380 +#define AUD_PILOT_BQD_1_K1 0x320384 +#define AUD_PILOT_BQD_1_K2 0x320388 +#define AUD_PILOT_BQD_1_K3 0x32038c +#define AUD_PILOT_BQD_1_K4 0x320390 +#define AUD_PILOT_BQD_2_K0 0x320394 +#define AUD_PILOT_BQD_2_K1 0x320398 +#define AUD_PILOT_BQD_2_K2 0x32039c +#define AUD_PILOT_BQD_2_K3 0x3203a0 +#define AUD_PILOT_BQD_2_K4 0x3203a4 +#define AUD_THR_FR 0x3203c0 +#define AUD_X_PROG 0x3203c4 +#define AUD_Y_PROG 0x3203c8 +#define AUD_HARMONIC_MULT 0x3203cc +#define AUD_C1_UP_THR 0x3203d0 +#define AUD_C1_LO_THR 0x3203d4 +#define AUD_C2_UP_THR 0x3203d8 +#define AUD_C2_LO_THR 0x3203dc +#define AUD_PLL_EN 0x320400 +#define AUD_PLL_SRC 0x320404 +#define AUD_PLL_SHIFT 0x320408 +#define AUD_PLL_IF_SEL 0x32040c +#define AUD_PLL_IF_SHIFT 0x320410 +#define AUD_BIQUAD_PLL_K0 0x320414 +#define AUD_BIQUAD_PLL_K1 0x320418 +#define AUD_BIQUAD_PLL_K2 0x32041c +#define AUD_BIQUAD_PLL_K3 0x320420 +#define AUD_BIQUAD_PLL_K4 0x320424 +#define AUD_DEEMPH0_SRC_SEL 0x320440 +#define AUD_DEEMPH0_SHIFT 0x320444 +#define AUD_DEEMPH0_G0 0x320448 +#define AUD_DEEMPH0_A0 0x32044c +#define AUD_DEEMPH0_B0 0x320450 +#define AUD_DEEMPH0_A1 0x320454 +#define AUD_DEEMPH0_B1 0x320458 +#define AUD_DEEMPH1_SRC_SEL 0x32045c +#define AUD_DEEMPH1_SHIFT 0x320460 +#define AUD_DEEMPH1_G0 0x320464 +#define AUD_DEEMPH1_A0 0x320468 +#define AUD_DEEMPH1_B0 0x32046c +#define AUD_DEEMPH1_A1 0x320470 +#define AUD_DEEMPH1_B1 0x320474 +#define AUD_OUT0_SEL 0x320490 +#define AUD_OUT0_SHIFT 0x320494 +#define AUD_OUT1_SEL 0x320498 +#define AUD_OUT1_SHIFT 0x32049c +#define AUD_RDSI_SEL 0x3204a0 +#define AUD_RDSI_SHIFT 0x3204a4 +#define AUD_RDSQ_SEL 0x3204a8 +#define AUD_RDSQ_SHIFT 0x3204ac +#define AUD_DBX_IN_GAIN 0x320500 +#define AUD_DBX_WBE_GAIN 0x320504 +#define AUD_DBX_SE_GAIN 0x320508 +#define AUD_DBX_RMS_WBE 0x32050c +#define AUD_DBX_RMS_SE 0x320510 +#define AUD_DBX_SE_BYPASS 0x320514 +#define AUD_FAWDETCTL 0x320530 +#define AUD_FAWDETWINCTL 0x320534 +#define AUD_DEEMPHGAIN_R 0x320538 +#define AUD_DEEMPHNUMER1_R 0x32053c +#define AUD_DEEMPHNUMER2_R 0x320540 +#define AUD_DEEMPHDENOM1_R 0x320544 +#define AUD_DEEMPHDENOM2_R 0x320548 +#define AUD_ERRLOGPERIOD_R 0x32054c +#define AUD_ERRINTRPTTHSHLD1_R 0x320550 +#define AUD_ERRINTRPTTHSHLD2_R 0x320554 +#define AUD_ERRINTRPTTHSHLD3_R 0x320558 +#define AUD_NICAM_STATUS1 0x32055c +#define AUD_NICAM_STATUS2 0x320560 +#define AUD_ERRLOG1 0x320564 +#define AUD_ERRLOG2 0x320568 +#define AUD_ERRLOG3 0x32056c +#define AUD_DAC_BYPASS_L 0x320580 +#define AUD_DAC_BYPASS_R 0x320584 +#define AUD_DAC_BYPASS_CTL 0x320588 +#define AUD_CTL 0x32058c +#define AUD_STATUS 0x320590 +#define AUD_VOL_CTL 0x320594 +#define AUD_BAL_CTL 0x320598 +#define AUD_START_TIMER 0x3205b0 +#define AUD_MODE_CHG_TIMER 0x3205b4 +#define AUD_POLYPH80SCALEFAC 0x3205b8 +#define AUD_DMD_RA_DDS 0x3205bc +#define AUD_I2S_RA_DDS 0x3205c0 +#define AUD_RATE_THRES_DMD 0x3205d0 +#define AUD_RATE_THRES_I2S 0x3205d4 +#define AUD_RATE_ADJ1 0x3205d8 +#define AUD_RATE_ADJ2 0x3205dc +#define AUD_RATE_ADJ3 0x3205e0 +#define AUD_RATE_ADJ4 0x3205e4 +#define AUD_RATE_ADJ5 0x3205e8 +#define AUD_APB_IN_RATE_ADJ 0x3205ec +#define AUD_I2SCNTL 0x3205ec +#define AUD_PHASE_FIX_CTL 0x3205f0 +#define AUD_PLL_PRESCALE 0x320600 +#define AUD_PLL_DDS 0x320604 +#define AUD_PLL_INT 0x320608 +#define AUD_PLL_FRAC 0x32060c +#define AUD_PLL_JTAG 0x320620 +#define AUD_PLL_SPMP 0x320624 +#define AUD_AFE_12DB_EN 0x320628 + +// Audio QAM Register Addresses +#define AUD_PDF_DDS_CNST_BYTE2 0x320d01 +#define AUD_PDF_DDS_CNST_BYTE1 0x320d02 +#define AUD_PDF_DDS_CNST_BYTE0 0x320d03 +#define AUD_PHACC_FREQ_8MSB 0x320d2a +#define AUD_PHACC_FREQ_8LSB 0x320d2b +#define AUD_QAM_MODE 0x320d04 + + +/* ---------------------------------------------------------------------- */ +/* transport stream registers */ + +#define MO_TS_DMA 0x330000 // {64}RWp Transport stream downstream +#define MO_TS_GPCNT 0x33C020 // {16}RO TS general purpose counter +#define MO_TS_GPCNTRL 0x33C030 // {2}WO TS general purpose control +#define MO_TS_DMACNTRL 0x33C040 // {6}RW TS DMA control +#define MO_TS_XFR_STAT 0x33C044 // {1}RO TS transfer status +#define MO_TS_LNGTH 0x33C048 // {12}RW TS line length + +#define TS_HW_SOP_CNTRL 0x33C04C +#define TS_GEN_CNTRL 0x33C050 +#define TS_BD_PKT_STAT 0x33C054 +#define TS_SOP_STAT 0x33C058 +#define TS_FIFO_OVFL_STAT 0x33C05C +#define TS_VALERR_CNTRL 0x33C060 + + +/* ---------------------------------------------------------------------- */ +/* VIP registers */ + +#define MO_VIPD_DMA 0x340000 // {64}RWp VIP downstream +#define MO_VIPU_DMA 0x340008 // {64}RWp VIP upstream +#define MO_VIPD_GPCNT 0x34C020 // {16}RO VIP down general purpose counter +#define MO_VIPU_GPCNT 0x34C024 // {16}RO VIP up general purpose counter +#define MO_VIPD_GPCNTRL 0x34C030 // {2}WO VIP down general purpose control +#define MO_VIPU_GPCNTRL 0x34C034 // {2}WO VIP up general purpose control +#define MO_VIP_DMACNTRL 0x34C040 // {6}RW VIP DMA control +#define MO_VIP_XFR_STAT 0x34C044 // {1}RO VIP transfer status +#define MO_VIP_CFG 0x340048 // VIP configuration +#define MO_VIPU_CNTRL 0x34004C // VIP upstream control #1 +#define MO_VIPD_CNTRL 0x340050 // VIP downstream control #2 +#define MO_VIPD_LNGTH 0x340054 // VIP downstream line length +#define MO_VIP_BRSTLN 0x340058 // VIP burst length +#define MO_VIP_INTCNTRL 0x34C05C // VIP Interrupt Control +#define MO_VIP_XFTERM 0x340060 // VIP transfer terminate + + +/* ---------------------------------------------------------------------- */ +/* misc registers */ + +#define MO_M2M_DMA 0x350000 // {64}RWp Mem2Mem DMA Bfr +#define MO_GP0_IO 0x350010 // {32}RW* GPIOoutput enablesdata I/O +#define MO_GP1_IO 0x350014 // {32}RW* GPIOoutput enablesdata I/O +#define MO_GP2_IO 0x350018 // {32}RW* GPIOoutput enablesdata I/O +#define MO_GP3_IO 0x35001C // {32}RW* GPIO Mode/Ctrloutput enables +#define MO_GPIO 0x350020 // {32}RW* GPIO I2C Ctrldata I/O +#define MO_GPOE 0x350024 // {32}RW GPIO I2C Ctrloutput enables +#define MO_GP_ISM 0x350028 // {16}WO GPIO Intr Sens/Pol + +#define MO_PLL_B 0x35C008 // {32}RW* PLL Control for ASB bus clks +#define MO_M2M_CNT 0x35C024 // {32}RW Mem2Mem DMA Cnt +#define MO_M2M_XSUM 0x35C028 // {32}RO M2M XOR-Checksum +#define MO_CRC 0x35C02C // {16}RW CRC16 init/result +#define MO_CRC_D 0x35C030 // {32}WO CRC16 new data in +#define MO_TM_CNT_LDW 0x35C034 // {32}RO Timer : Counter low dword +#define MO_TM_CNT_UW 0x35C038 // {16}RO Timer : Counter high word +#define MO_TM_LMT_LDW 0x35C03C // {32}RW Timer : Limit low dword +#define MO_TM_LMT_UW 0x35C040 // {32}RW Timer : Limit high word +#define MO_PINMUX_IO 0x35C044 // {8}RW Pin Mux Control +#define MO_TSTSEL_IO 0x35C048 // {2}RW Pin Mux Control +#define MO_AFECFG_IO 0x35C04C // AFE configuration reg +#define MO_DDS_IO 0x35C050 // DDS Increment reg +#define MO_DDSCFG_IO 0x35C054 // DDS Configuration reg +#define MO_SAMPLE_IO 0x35C058 // IRIn sample reg +#define MO_SRST_IO 0x35C05C // Output system reset reg + +#define MO_INT1_MSK 0x35C060 // DMA RISC interrupt mask +#define MO_INT1_STAT 0x35C064 // DMA RISC interrupt status +#define MO_INT1_MSTAT 0x35C068 // DMA RISC interrupt masked status + + +/* ---------------------------------------------------------------------- */ +/* i2c bus registers */ + +#define MO_I2C 0x368000 // I2C data/control +#define MO_I2C_DIV (0xf<<4) +#define MO_I2C_SYNC (1<<3) +#define MO_I2C_W3B (1<<2) +#define MO_I2C_SCL (1<<1) +#define MO_I2C_SDA (1<<0) + + +/* ---------------------------------------------------------------------- */ +/* general purpose host registers */ +/* FIXME: tyops? s/0x35/0x38/ ?? */ + +#define MO_GPHSTD_DMA 0x350000 // {64}RWp Host downstream +#define MO_GPHSTU_DMA 0x350008 // {64}RWp Host upstream +#define MO_GPHSTU_CNTRL 0x380048 // Host upstream control #1 +#define MO_GPHSTD_CNTRL 0x38004C // Host downstream control #2 +#define MO_GPHSTD_LNGTH 0x380050 // Host downstream line length +#define MO_GPHST_WSC 0x380054 // Host wait state control +#define MO_GPHST_XFR 0x380058 // Host transfer control +#define MO_GPHST_WDTH 0x38005C // Host interface width +#define MO_GPHST_HDSHK 0x380060 // Host peripheral handshake +#define MO_GPHST_MUX16 0x380064 // Host muxed 16-bit transfer parameters +#define MO_GPHST_MODE 0x380068 // Host mode select + +#define MO_GPHSTD_GPCNT 0x35C020 // Host down general purpose counter +#define MO_GPHSTU_GPCNT 0x35C024 // Host up general purpose counter +#define MO_GPHSTD_GPCNTRL 0x38C030 // Host down general purpose control +#define MO_GPHSTU_GPCNTRL 0x38C034 // Host up general purpose control +#define MO_GPHST_DMACNTRL 0x38C040 // Host DMA control +#define MO_GPHST_XFR_STAT 0x38C044 // Host transfer status +#define MO_GPHST_SOFT_RST 0x38C06C // Host software reset + + +/* ---------------------------------------------------------------------- */ +/* RISC instructions */ + +#define RISC_SYNC 0x80000000 +#define RISC_SYNC_ODD 0x80000000 +#define RISC_SYNC_EVEN 0x80000200 +#define RISC_RESYNC 0x80008000 +#define RISC_RESYNC_ODD 0x80008000 +#define RISC_RESYNC_EVEN 0x80008200 +#define RISC_WRITE 0x10000000 +#define RISC_WRITEC 0x50000000 +#define RISC_READ 0x90000000 +#define RISC_READC 0xA0000000 +#define RISC_JUMP 0x70000000 +#define RISC_SKIP 0x20000000 +#define RISC_WRITERM 0xB0000000 +#define RISC_WRITECM 0xC0000000 +#define RISC_WRITECR 0xD0000000 +#define RISC_IMM 0x00000001 + +#define RISC_SOL 0x08000000 +#define RISC_EOL 0x04000000 + +#define RISC_IRQ2 0x02000000 +#define RISC_IRQ1 0x01000000 + +#define RISC_CNT_NONE 0x00000000 +#define RISC_CNT_INC 0x00010000 +#define RISC_CNT_RSVR 0x00020000 +#define RISC_CNT_RESET 0x00030000 +#define RISC_JMP_SRP 0x01 + + +/* ---------------------------------------------------------------------- */ +/* various constants */ + +// DMA +/* Interrupt mask/status */ +#define PCI_INT_VIDINT (1 << 0) +#define PCI_INT_AUDINT (1 << 1) +#define PCI_INT_TSINT (1 << 2) +#define PCI_INT_VIPINT (1 << 3) +#define PCI_INT_HSTINT (1 << 4) +#define PCI_INT_TM1INT (1 << 5) +#define PCI_INT_SRCDMAINT (1 << 6) +#define PCI_INT_DSTDMAINT (1 << 7) +#define PCI_INT_RISC_RD_BERRINT (1 << 10) +#define PCI_INT_RISC_WR_BERRINT (1 << 11) +#define PCI_INT_BRDG_BERRINT (1 << 12) +#define PCI_INT_SRC_DMA_BERRINT (1 << 13) +#define PCI_INT_DST_DMA_BERRINT (1 << 14) +#define PCI_INT_IPB_DMA_BERRINT (1 << 15) +#define PCI_INT_I2CDONE (1 << 16) +#define PCI_INT_I2CRACK (1 << 17) +#define PCI_INT_IR_SMPINT (1 << 18) +#define PCI_INT_GPIO_INT0 (1 << 19) +#define PCI_INT_GPIO_INT1 (1 << 20) + +#define SEL_BTSC 0x01 +#define SEL_EIAJ 0x02 +#define SEL_A2 0x04 +#define SEL_SAP 0x08 +#define SEL_NICAM 0x10 +#define SEL_FMRADIO 0x20 + +// AUD_CTL +#define AUD_INT_DN_RISCI1 (1 << 0) +#define AUD_INT_UP_RISCI1 (1 << 1) +#define AUD_INT_RDS_DN_RISCI1 (1 << 2) +#define AUD_INT_DN_RISCI2 (1 << 4) /* yes, 3 is skipped */ +#define AUD_INT_UP_RISCI2 (1 << 5) +#define AUD_INT_RDS_DN_RISCI2 (1 << 6) +#define AUD_INT_DN_SYNC (1 << 12) +#define AUD_INT_UP_SYNC (1 << 13) +#define AUD_INT_RDS_DN_SYNC (1 << 14) +#define AUD_INT_OPC_ERR (1 << 16) +#define AUD_INT_BER_IRQ (1 << 20) +#define AUD_INT_MCHG_IRQ (1 << 21) + +#define EN_BTSC_FORCE_MONO 0 +#define EN_BTSC_FORCE_STEREO 1 +#define EN_BTSC_FORCE_SAP 2 +#define EN_BTSC_AUTO_STEREO 3 +#define EN_BTSC_AUTO_SAP 4 + +#define EN_A2_FORCE_MONO1 8 +#define EN_A2_FORCE_MONO2 9 +#define EN_A2_FORCE_STEREO 10 +#define EN_A2_AUTO_MONO2 11 +#define EN_A2_AUTO_STEREO 12 + +#define EN_EIAJ_FORCE_MONO1 16 +#define EN_EIAJ_FORCE_MONO2 17 +#define EN_EIAJ_FORCE_STEREO 18 +#define EN_EIAJ_AUTO_MONO2 19 +#define EN_EIAJ_AUTO_STEREO 20 + +#define EN_NICAM_FORCE_MONO1 32 +#define EN_NICAM_FORCE_MONO2 33 +#define EN_NICAM_FORCE_STEREO 34 +#define EN_NICAM_AUTO_MONO2 35 +#define EN_NICAM_AUTO_STEREO 36 + +#define EN_FMRADIO_FORCE_MONO 24 +#define EN_FMRADIO_FORCE_STEREO 25 +#define EN_FMRADIO_AUTO_STEREO 26 + +#define EN_NICAM_AUTO_FALLBACK 0x00000040 +#define EN_FMRADIO_EN_RDS 0x00000200 +#define EN_NICAM_TRY_AGAIN_BIT 0x00000400 +#define EN_DAC_ENABLE 0x00001000 +#define EN_I2SOUT_ENABLE 0x00002000 +#define EN_I2SIN_STR2DAC 0x00004000 +#define EN_I2SIN_ENABLE 0x00008000 + +#define EN_DMTRX_SUMDIFF (0 << 7) +#define EN_DMTRX_SUMR (1 << 7) +#define EN_DMTRX_LR (2 << 7) +#define EN_DMTRX_MONO (3 << 7) +#define EN_DMTRX_BYPASS (1 << 11) + +// Video +#define VID_CAPTURE_CONTROL 0x310180 + +#define CX23880_CAP_CTL_CAPTURE_VBI_ODD (1<<3) +#define CX23880_CAP_CTL_CAPTURE_VBI_EVEN (1<<2) +#define CX23880_CAP_CTL_CAPTURE_ODD (1<<1) +#define CX23880_CAP_CTL_CAPTURE_EVEN (1<<0) + +#define VideoInputMux0 0x0 +#define VideoInputMux1 0x1 +#define VideoInputMux2 0x2 +#define VideoInputMux3 0x3 +#define VideoInputTuner 0x0 +#define VideoInputComposite 0x1 +#define VideoInputSVideo 0x2 +#define VideoInputOther 0x3 + +#define Xtal0 0x1 +#define Xtal1 0x2 +#define XtalAuto 0x3 + +#define VideoFormatAuto 0x0 +#define VideoFormatNTSC 0x1 +#define VideoFormatNTSCJapan 0x2 +#define VideoFormatNTSC443 0x3 +#define VideoFormatPAL 0x4 +#define VideoFormatPALB 0x4 +#define VideoFormatPALD 0x4 +#define VideoFormatPALG 0x4 +#define VideoFormatPALH 0x4 +#define VideoFormatPALI 0x4 +#define VideoFormatPALBDGHI 0x4 +#define VideoFormatPALM 0x5 +#define VideoFormatPALN 0x6 +#define VideoFormatPALNC 0x7 +#define VideoFormatPAL60 0x8 +#define VideoFormatSECAM 0x9 + +#define VideoFormatAuto27MHz 0x10 +#define VideoFormatNTSC27MHz 0x11 +#define VideoFormatNTSCJapan27MHz 0x12 +#define VideoFormatNTSC44327MHz 0x13 +#define VideoFormatPAL27MHz 0x14 +#define VideoFormatPALB27MHz 0x14 +#define VideoFormatPALD27MHz 0x14 +#define VideoFormatPALG27MHz 0x14 +#define VideoFormatPALH27MHz 0x14 +#define VideoFormatPALI27MHz 0x14 +#define VideoFormatPALBDGHI27MHz 0x14 +#define VideoFormatPALM27MHz 0x15 +#define VideoFormatPALN27MHz 0x16 +#define VideoFormatPALNC27MHz 0x17 +#define VideoFormatPAL6027MHz 0x18 +#define VideoFormatSECAM27MHz 0x19 + +#define NominalUSECAM 0x87 +#define NominalVSECAM 0x85 +#define NominalUNTSC 0xFE +#define NominalVNTSC 0xB4 + +#define NominalContrast 0xD8 + +#define HFilterAutoFormat 0x0 +#define HFilterCIF 0x1 +#define HFilterQCIF 0x2 +#define HFilterICON 0x3 + +#define VFilter2TapInterpolate 0 +#define VFilter3TapInterpolate 1 +#define VFilter4TapInterpolate 2 +#define VFilter5TapInterpolate 3 +#define VFilter2TapNoInterpolate 4 +#define VFilter3TapNoInterpolate 5 +#define VFilter4TapNoInterpolate 6 +#define VFilter5TapNoInterpolate 7 + +#define ColorFormatRGB32 0x0000 +#define ColorFormatRGB24 0x0011 +#define ColorFormatRGB16 0x0022 +#define ColorFormatRGB15 0x0033 +#define ColorFormatYUY2 0x0044 +#define ColorFormatBTYUV 0x0055 +#define ColorFormatY8 0x0066 +#define ColorFormatRGB8 0x0077 +#define ColorFormatPL422 0x0088 +#define ColorFormatPL411 0x0099 +#define ColorFormatYUV12 0x00AA +#define ColorFormatYUV9 0x00BB +#define ColorFormatRAW 0x00EE +#define ColorFormatBSWAP 0x0300 +#define ColorFormatWSWAP 0x0c00 +#define ColorFormatEvenMask 0x050f +#define ColorFormatOddMask 0x0af0 +#define ColorFormatGamma 0x1000 + +#define Interlaced 0x1 +#define NonInterlaced 0x0 + +#define FieldEven 0x1 +#define FieldOdd 0x0 + +#define TGReadWriteMode 0x0 +#define TGEnableMode 0x1 + +#define DV_CbAlign 0x0 +#define DV_Y0Align 0x1 +#define DV_CrAlign 0x2 +#define DV_Y1Align 0x3 + +#define DVF_Analog 0x0 +#define DVF_CCIR656 0x1 +#define DVF_ByteStream 0x2 +#define DVF_ExtVSYNC 0x4 +#define DVF_ExtField 0x5 + +#define CHANNEL_VID_Y 0x1 +#define CHANNEL_VID_U 0x2 +#define CHANNEL_VID_V 0x3 +#define CHANNEL_VID_VBI 0x4 +#define CHANNEL_AUD_DN 0x5 +#define CHANNEL_AUD_UP 0x6 +#define CHANNEL_AUD_RDS_DN 0x7 +#define CHANNEL_MPEG_DN 0x8 +#define CHANNEL_VIP_DN 0x9 +#define CHANNEL_VIP_UP 0xA +#define CHANNEL_HOST_DN 0xB +#define CHANNEL_HOST_UP 0xC +#define CHANNEL_FIRST 0x1 +#define CHANNEL_LAST 0xC + +#define GP_COUNT_CONTROL_NONE 0x0 +#define GP_COUNT_CONTROL_INC 0x1 +#define GP_COUNT_CONTROL_RESERVED 0x2 +#define GP_COUNT_CONTROL_RESET 0x3 + +#define PLL_PRESCALE_BY_2 2 +#define PLL_PRESCALE_BY_3 3 +#define PLL_PRESCALE_BY_4 4 +#define PLL_PRESCALE_BY_5 5 + +#define HLNotchFilter4xFsc 0 +#define HLNotchFilterSquare 1 +#define HLNotchFilter135NTSC 2 +#define HLNotchFilter135PAL 3 + +#define NTSC_8x_SUB_CARRIER 28.63636E6 +#define PAL_8x_SUB_CARRIER 35.46895E6 + +// Default analog settings +#define DEFAULT_HUE_NTSC 0x00 +#define DEFAULT_BRIGHTNESS_NTSC 0x00 +#define DEFAULT_CONTRAST_NTSC 0x39 +#define DEFAULT_SAT_U_NTSC 0x7F +#define DEFAULT_SAT_V_NTSC 0x5A + +typedef enum +{ + SOURCE_TUNER = 0, + SOURCE_COMPOSITE, + SOURCE_SVIDEO, + SOURCE_OTHER1, + SOURCE_OTHER2, + SOURCE_COMPVIASVIDEO, + SOURCE_CCIR656 +} VIDEOSOURCETYPE; + +#endif /* _CX88_REG_H_ */ diff --git a/drivers/media/pci/cx88/cx88-tvaudio.c b/drivers/media/pci/cx88/cx88-tvaudio.c new file mode 100644 index 00000000..424fd974 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-tvaudio.c @@ -0,0 +1,1059 @@ +/* + + cx88x-audio.c - Conexant CX23880/23881 audio downstream driver driver + + (c) 2001 Michael Eskin, Tom Zakrajsek [Windows version] + (c) 2002 Yurij Sysoev + (c) 2003 Gerd Knorr + + ----------------------------------------------------------------------- + + Lot of voodoo here. Even the data sheet doesn't help to + understand what is going on here, the documentation for the audio + part of the cx2388x chip is *very* bad. + + Some of this comes from party done linux driver sources I got from + [undocumented]. + + Some comes from the dscaler sources, one of the dscaler driver guy works + for Conexant ... + + ----------------------------------------------------------------------- + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx88.h" + +static unsigned int audio_debug; +module_param(audio_debug, int, 0644); +MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]"); + +static unsigned int always_analog; +module_param(always_analog,int,0644); +MODULE_PARM_DESC(always_analog,"force analog audio out"); + +static unsigned int radio_deemphasis; +module_param(radio_deemphasis,int,0644); +MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, " + "0=None, 1=50us (elsewhere), 2=75us (USA)"); + +#define dprintk(fmt, arg...) if (audio_debug) \ + printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg) + +/* ----------------------------------------------------------- */ + +static const char * const aud_ctl_names[64] = { + [EN_BTSC_FORCE_MONO] = "BTSC_FORCE_MONO", + [EN_BTSC_FORCE_STEREO] = "BTSC_FORCE_STEREO", + [EN_BTSC_FORCE_SAP] = "BTSC_FORCE_SAP", + [EN_BTSC_AUTO_STEREO] = "BTSC_AUTO_STEREO", + [EN_BTSC_AUTO_SAP] = "BTSC_AUTO_SAP", + [EN_A2_FORCE_MONO1] = "A2_FORCE_MONO1", + [EN_A2_FORCE_MONO2] = "A2_FORCE_MONO2", + [EN_A2_FORCE_STEREO] = "A2_FORCE_STEREO", + [EN_A2_AUTO_MONO2] = "A2_AUTO_MONO2", + [EN_A2_AUTO_STEREO] = "A2_AUTO_STEREO", + [EN_EIAJ_FORCE_MONO1] = "EIAJ_FORCE_MONO1", + [EN_EIAJ_FORCE_MONO2] = "EIAJ_FORCE_MONO2", + [EN_EIAJ_FORCE_STEREO] = "EIAJ_FORCE_STEREO", + [EN_EIAJ_AUTO_MONO2] = "EIAJ_AUTO_MONO2", + [EN_EIAJ_AUTO_STEREO] = "EIAJ_AUTO_STEREO", + [EN_NICAM_FORCE_MONO1] = "NICAM_FORCE_MONO1", + [EN_NICAM_FORCE_MONO2] = "NICAM_FORCE_MONO2", + [EN_NICAM_FORCE_STEREO] = "NICAM_FORCE_STEREO", + [EN_NICAM_AUTO_MONO2] = "NICAM_AUTO_MONO2", + [EN_NICAM_AUTO_STEREO] = "NICAM_AUTO_STEREO", + [EN_FMRADIO_FORCE_MONO] = "FMRADIO_FORCE_MONO", + [EN_FMRADIO_FORCE_STEREO] = "FMRADIO_FORCE_STEREO", + [EN_FMRADIO_AUTO_STEREO] = "FMRADIO_AUTO_STEREO", +}; + +struct rlist { + u32 reg; + u32 val; +}; + +static void set_audio_registers(struct cx88_core *core, const struct rlist *l) +{ + int i; + + for (i = 0; l[i].reg; i++) { + switch (l[i].reg) { + case AUD_PDF_DDS_CNST_BYTE2: + case AUD_PDF_DDS_CNST_BYTE1: + case AUD_PDF_DDS_CNST_BYTE0: + case AUD_QAM_MODE: + case AUD_PHACC_FREQ_8MSB: + case AUD_PHACC_FREQ_8LSB: + cx_writeb(l[i].reg, l[i].val); + break; + default: + cx_write(l[i].reg, l[i].val); + break; + } + } +} + +static void set_audio_start(struct cx88_core *core, u32 mode) +{ + /* mute */ + cx_write(AUD_VOL_CTL, (1 << 6)); + + /* start programming */ + cx_write(AUD_INIT, mode); + cx_write(AUD_INIT_LD, 0x0001); + cx_write(AUD_SOFT_RESET, 0x0001); +} + +static void set_audio_finish(struct cx88_core *core, u32 ctl) +{ + u32 volume; + + /* restart dma; This avoids buzz in NICAM and is good in others */ + cx88_stop_audio_dma(core); + cx_write(AUD_RATE_THRES_DMD, 0x000000C0); + cx88_start_audio_dma(core); + + if (core->board.mpeg & CX88_MPEG_BLACKBIRD) { + cx_write(AUD_I2SINPUTCNTL, 4); + cx_write(AUD_BAUDRATE, 1); + /* 'pass-thru mode': this enables the i2s output to the mpeg encoder */ + cx_set(AUD_CTL, EN_I2SOUT_ENABLE); + cx_write(AUD_I2SOUTPUTCNTL, 1); + cx_write(AUD_I2SCNTL, 0); + /* cx_write(AUD_APB_IN_RATE_ADJ, 0); */ + } + if ((always_analog) || (!(core->board.mpeg & CX88_MPEG_BLACKBIRD))) { + ctl |= EN_DAC_ENABLE; + cx_write(AUD_CTL, ctl); + } + + /* finish programming */ + cx_write(AUD_SOFT_RESET, 0x0000); + + /* unmute */ + volume = cx_sread(SHADOW_AUD_VOL_CTL); + cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, volume); + + core->last_change = jiffies; +} + +/* ----------------------------------------------------------- */ + +static void set_audio_standard_BTSC(struct cx88_core *core, unsigned int sap, + u32 mode) +{ + static const struct rlist btsc[] = { + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_OUT1_SEL, 0x00000013}, + {AUD_OUT1_SHIFT, 0x00000000}, + {AUD_POLY0_DDS_CONSTANT, 0x0012010c}, + {AUD_DMD_RA_DDS, 0x00c3e7aa}, + {AUD_DBX_IN_GAIN, 0x00004734}, + {AUD_DBX_WBE_GAIN, 0x00004640}, + {AUD_DBX_SE_GAIN, 0x00008d31}, + {AUD_DCOC_0_SRC, 0x0000001a}, + {AUD_IIR1_4_SEL, 0x00000021}, + {AUD_DCOC_PASS_IN, 0x00000003}, + {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, + {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, + {AUD_DN0_FREQ, 0x0000283b}, + {AUD_DN2_SRC_SEL, 0x00000008}, + {AUD_DN2_FREQ, 0x00003000}, + {AUD_DN2_AFC, 0x00000002}, + {AUD_DN2_SHFT, 0x00000000}, + {AUD_IIR2_2_SEL, 0x00000020}, + {AUD_IIR2_2_SHIFT, 0x00000000}, + {AUD_IIR2_3_SEL, 0x0000001f}, + {AUD_IIR2_3_SHIFT, 0x00000000}, + {AUD_CRDC1_SRC_SEL, 0x000003ce}, + {AUD_CRDC1_SHIFT, 0x00000000}, + {AUD_CORDIC_SHIFT_1, 0x00000007}, + {AUD_DCOC_1_SRC, 0x0000001b}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_RDSI_SEL, 0x00000008}, + {AUD_RDSQ_SEL, 0x00000008}, + {AUD_RDSI_SHIFT, 0x00000000}, + {AUD_RDSQ_SHIFT, 0x00000000}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, + { /* end of list */ }, + }; + static const struct rlist btsc_sap[] = { + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_DBX_IN_GAIN, 0x00007200}, + {AUD_DBX_WBE_GAIN, 0x00006200}, + {AUD_DBX_SE_GAIN, 0x00006200}, + {AUD_IIR1_1_SEL, 0x00000000}, + {AUD_IIR1_3_SEL, 0x00000001}, + {AUD_DN1_SRC_SEL, 0x00000007}, + {AUD_IIR1_4_SHIFT, 0x00000006}, + {AUD_IIR2_1_SHIFT, 0x00000000}, + {AUD_IIR2_2_SHIFT, 0x00000000}, + {AUD_IIR3_0_SHIFT, 0x00000000}, + {AUD_IIR3_1_SHIFT, 0x00000000}, + {AUD_IIR3_0_SEL, 0x0000000d}, + {AUD_IIR3_1_SEL, 0x0000000e}, + {AUD_DEEMPH1_SRC_SEL, 0x00000014}, + {AUD_DEEMPH1_SHIFT, 0x00000000}, + {AUD_DEEMPH1_G0, 0x00004000}, + {AUD_DEEMPH1_A0, 0x00000000}, + {AUD_DEEMPH1_B0, 0x00000000}, + {AUD_DEEMPH1_A1, 0x00000000}, + {AUD_DEEMPH1_B1, 0x00000000}, + {AUD_OUT0_SEL, 0x0000003f}, + {AUD_OUT1_SEL, 0x0000003f}, + {AUD_DN1_AFC, 0x00000002}, + {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, + {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, + {AUD_IIR1_0_SEL, 0x0000001d}, + {AUD_IIR1_2_SEL, 0x0000001e}, + {AUD_IIR2_1_SEL, 0x00000002}, + {AUD_IIR2_2_SEL, 0x00000004}, + {AUD_IIR3_2_SEL, 0x0000000f}, + {AUD_DCOC2_SHIFT, 0x00000001}, + {AUD_IIR3_2_SHIFT, 0x00000001}, + {AUD_DEEMPH0_SRC_SEL, 0x00000014}, + {AUD_CORDIC_SHIFT_1, 0x00000006}, + {AUD_POLY0_DDS_CONSTANT, 0x000e4db2}, + {AUD_DMD_RA_DDS, 0x00f696e6}, + {AUD_IIR2_3_SEL, 0x00000025}, + {AUD_IIR1_4_SEL, 0x00000021}, + {AUD_DN1_FREQ, 0x0000c965}, + {AUD_DCOC_PASS_IN, 0x00000003}, + {AUD_DCOC_0_SRC, 0x0000001a}, + {AUD_DCOC_1_SRC, 0x0000001b}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_RDSI_SEL, 0x00000009}, + {AUD_RDSQ_SEL, 0x00000009}, + {AUD_RDSI_SHIFT, 0x00000000}, + {AUD_RDSQ_SHIFT, 0x00000000}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, + { /* end of list */ }, + }; + + mode |= EN_FMRADIO_EN_RDS; + + if (sap) { + dprintk("%s SAP (status: unknown)\n", __func__); + set_audio_start(core, SEL_SAP); + set_audio_registers(core, btsc_sap); + set_audio_finish(core, mode); + } else { + dprintk("%s (status: known-good)\n", __func__); + set_audio_start(core, SEL_BTSC); + set_audio_registers(core, btsc); + set_audio_finish(core, mode); + } +} + +static void set_audio_standard_NICAM(struct cx88_core *core, u32 mode) +{ + static const struct rlist nicam_l[] = { + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_RATE_ADJ1, 0x00000060}, + {AUD_RATE_ADJ2, 0x000000F9}, + {AUD_RATE_ADJ3, 0x000001CC}, + {AUD_RATE_ADJ4, 0x000002B3}, + {AUD_RATE_ADJ5, 0x00000726}, + {AUD_DEEMPHDENOM1_R, 0x0000F3D0}, + {AUD_DEEMPHDENOM2_R, 0x00000000}, + {AUD_ERRLOGPERIOD_R, 0x00000064}, + {AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF}, + {AUD_ERRINTRPTTHSHLD2_R, 0x0000001F}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000000F}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, + {AUD_DMD_RA_DDS, 0x00C00000}, + {AUD_PLL_INT, 0x0000001E}, + {AUD_PLL_DDS, 0x00000000}, + {AUD_PLL_FRAC, 0x0000E542}, + {AUD_START_TIMER, 0x00000000}, + {AUD_DEEMPHNUMER1_R, 0x000353DE}, + {AUD_DEEMPHNUMER2_R, 0x000001B1}, + {AUD_PDF_DDS_CNST_BYTE2, 0x06}, + {AUD_PDF_DDS_CNST_BYTE1, 0x82}, + {AUD_PDF_DDS_CNST_BYTE0, 0x12}, + {AUD_QAM_MODE, 0x05}, + {AUD_PHACC_FREQ_8MSB, 0x34}, + {AUD_PHACC_FREQ_8LSB, 0x4C}, + {AUD_DEEMPHGAIN_R, 0x00006680}, + {AUD_RATE_THRES_DMD, 0x000000C0}, + { /* end of list */ }, + }; + + static const struct rlist nicam_bgdki_common[] = { + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_RATE_ADJ1, 0x00000010}, + {AUD_RATE_ADJ2, 0x00000040}, + {AUD_RATE_ADJ3, 0x00000100}, + {AUD_RATE_ADJ4, 0x00000400}, + {AUD_RATE_ADJ5, 0x00001000}, + {AUD_ERRLOGPERIOD_R, 0x00000fff}, + {AUD_ERRINTRPTTHSHLD1_R, 0x000003ff}, + {AUD_ERRINTRPTTHSHLD2_R, 0x000000ff}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000003f}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, + {AUD_DEEMPHGAIN_R, 0x000023c2}, + {AUD_DEEMPHNUMER1_R, 0x0002a7bc}, + {AUD_DEEMPHNUMER2_R, 0x0003023e}, + {AUD_DEEMPHDENOM1_R, 0x0000f3d0}, + {AUD_DEEMPHDENOM2_R, 0x00000000}, + {AUD_PDF_DDS_CNST_BYTE2, 0x06}, + {AUD_PDF_DDS_CNST_BYTE1, 0x82}, + {AUD_QAM_MODE, 0x05}, + { /* end of list */ }, + }; + + static const struct rlist nicam_i[] = { + {AUD_PDF_DDS_CNST_BYTE0, 0x12}, + {AUD_PHACC_FREQ_8MSB, 0x3a}, + {AUD_PHACC_FREQ_8LSB, 0x93}, + { /* end of list */ }, + }; + + static const struct rlist nicam_default[] = { + {AUD_PDF_DDS_CNST_BYTE0, 0x16}, + {AUD_PHACC_FREQ_8MSB, 0x34}, + {AUD_PHACC_FREQ_8LSB, 0x4c}, + { /* end of list */ }, + }; + + set_audio_start(core,SEL_NICAM); + switch (core->tvaudio) { + case WW_L: + dprintk("%s SECAM-L NICAM (status: devel)\n", __func__); + set_audio_registers(core, nicam_l); + break; + case WW_I: + dprintk("%s PAL-I NICAM (status: known-good)\n", __func__); + set_audio_registers(core, nicam_bgdki_common); + set_audio_registers(core, nicam_i); + break; + case WW_NONE: + case WW_BTSC: + case WW_BG: + case WW_DK: + case WW_EIAJ: + case WW_I2SPT: + case WW_FM: + case WW_I2SADC: + case WW_M: + dprintk("%s PAL-BGDK NICAM (status: known-good)\n", __func__); + set_audio_registers(core, nicam_bgdki_common); + set_audio_registers(core, nicam_default); + break; + } + + mode |= EN_DMTRX_LR | EN_DMTRX_BYPASS; + set_audio_finish(core, mode); +} + +static void set_audio_standard_A2(struct cx88_core *core, u32 mode) +{ + static const struct rlist a2_bgdk_common[] = { + {AUD_ERRLOGPERIOD_R, 0x00000064}, + {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff}, + {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f}, + {AUD_PDF_DDS_CNST_BYTE2, 0x06}, + {AUD_PDF_DDS_CNST_BYTE1, 0x82}, + {AUD_PDF_DDS_CNST_BYTE0, 0x12}, + {AUD_QAM_MODE, 0x05}, + {AUD_PHACC_FREQ_8MSB, 0x34}, + {AUD_PHACC_FREQ_8LSB, 0x4c}, + {AUD_RATE_ADJ1, 0x00000100}, + {AUD_RATE_ADJ2, 0x00000200}, + {AUD_RATE_ADJ3, 0x00000300}, + {AUD_RATE_ADJ4, 0x00000400}, + {AUD_RATE_ADJ5, 0x00000500}, + {AUD_THR_FR, 0x00000000}, + {AAGC_HYST, 0x0000001a}, + {AUD_PILOT_BQD_1_K0, 0x0000755b}, + {AUD_PILOT_BQD_1_K1, 0x00551340}, + {AUD_PILOT_BQD_1_K2, 0x006d30be}, + {AUD_PILOT_BQD_1_K3, 0xffd394af}, + {AUD_PILOT_BQD_1_K4, 0x00400000}, + {AUD_PILOT_BQD_2_K0, 0x00040000}, + {AUD_PILOT_BQD_2_K1, 0x002a4841}, + {AUD_PILOT_BQD_2_K2, 0x00400000}, + {AUD_PILOT_BQD_2_K3, 0x00000000}, + {AUD_PILOT_BQD_2_K4, 0x00000000}, + {AUD_MODE_CHG_TIMER, 0x00000040}, + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_CORDIC_SHIFT_0, 0x00000007}, + {AUD_CORDIC_SHIFT_1, 0x00000007}, + {AUD_DEEMPH0_G0, 0x00000380}, + {AUD_DEEMPH1_G0, 0x00000380}, + {AUD_DCOC_0_SRC, 0x0000001a}, + {AUD_DCOC0_SHIFT, 0x00000000}, + {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, + {AUD_DCOC_PASS_IN, 0x00000003}, + {AUD_IIR3_0_SEL, 0x00000021}, + {AUD_DN2_AFC, 0x00000002}, + {AUD_DCOC_1_SRC, 0x0000001b}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, + {AUD_IIR3_1_SEL, 0x00000023}, + {AUD_RDSI_SEL, 0x00000017}, + {AUD_RDSI_SHIFT, 0x00000000}, + {AUD_RDSQ_SEL, 0x00000017}, + {AUD_RDSQ_SHIFT, 0x00000000}, + {AUD_PLL_INT, 0x0000001e}, + {AUD_PLL_DDS, 0x00000000}, + {AUD_PLL_FRAC, 0x0000e542}, + {AUD_POLYPH80SCALEFAC, 0x00000001}, + {AUD_START_TIMER, 0x00000000}, + { /* end of list */ }, + }; + + static const struct rlist a2_bg[] = { + {AUD_DMD_RA_DDS, 0x002a4f2f}, + {AUD_C1_UP_THR, 0x00007000}, + {AUD_C1_LO_THR, 0x00005400}, + {AUD_C2_UP_THR, 0x00005400}, + {AUD_C2_LO_THR, 0x00003000}, + { /* end of list */ }, + }; + + static const struct rlist a2_dk[] = { + {AUD_DMD_RA_DDS, 0x002a4f2f}, + {AUD_C1_UP_THR, 0x00007000}, + {AUD_C1_LO_THR, 0x00005400}, + {AUD_C2_UP_THR, 0x00005400}, + {AUD_C2_LO_THR, 0x00003000}, + {AUD_DN0_FREQ, 0x00003a1c}, + {AUD_DN2_FREQ, 0x0000d2e0}, + { /* end of list */ }, + }; + + static const struct rlist a1_i[] = { + {AUD_ERRLOGPERIOD_R, 0x00000064}, + {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff}, + {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f}, + {AUD_PDF_DDS_CNST_BYTE2, 0x06}, + {AUD_PDF_DDS_CNST_BYTE1, 0x82}, + {AUD_PDF_DDS_CNST_BYTE0, 0x12}, + {AUD_QAM_MODE, 0x05}, + {AUD_PHACC_FREQ_8MSB, 0x3a}, + {AUD_PHACC_FREQ_8LSB, 0x93}, + {AUD_DMD_RA_DDS, 0x002a4f2f}, + {AUD_PLL_INT, 0x0000001e}, + {AUD_PLL_DDS, 0x00000004}, + {AUD_PLL_FRAC, 0x0000e542}, + {AUD_RATE_ADJ1, 0x00000100}, + {AUD_RATE_ADJ2, 0x00000200}, + {AUD_RATE_ADJ3, 0x00000300}, + {AUD_RATE_ADJ4, 0x00000400}, + {AUD_RATE_ADJ5, 0x00000500}, + {AUD_THR_FR, 0x00000000}, + {AUD_PILOT_BQD_1_K0, 0x0000755b}, + {AUD_PILOT_BQD_1_K1, 0x00551340}, + {AUD_PILOT_BQD_1_K2, 0x006d30be}, + {AUD_PILOT_BQD_1_K3, 0xffd394af}, + {AUD_PILOT_BQD_1_K4, 0x00400000}, + {AUD_PILOT_BQD_2_K0, 0x00040000}, + {AUD_PILOT_BQD_2_K1, 0x002a4841}, + {AUD_PILOT_BQD_2_K2, 0x00400000}, + {AUD_PILOT_BQD_2_K3, 0x00000000}, + {AUD_PILOT_BQD_2_K4, 0x00000000}, + {AUD_MODE_CHG_TIMER, 0x00000060}, + {AUD_AFE_12DB_EN, 0x00000001}, + {AAGC_HYST, 0x0000000a}, + {AUD_CORDIC_SHIFT_0, 0x00000007}, + {AUD_CORDIC_SHIFT_1, 0x00000007}, + {AUD_C1_UP_THR, 0x00007000}, + {AUD_C1_LO_THR, 0x00005400}, + {AUD_C2_UP_THR, 0x00005400}, + {AUD_C2_LO_THR, 0x00003000}, + {AUD_DCOC_0_SRC, 0x0000001a}, + {AUD_DCOC0_SHIFT, 0x00000000}, + {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, + {AUD_DCOC_PASS_IN, 0x00000003}, + {AUD_IIR3_0_SEL, 0x00000021}, + {AUD_DN2_AFC, 0x00000002}, + {AUD_DCOC_1_SRC, 0x0000001b}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, + {AUD_IIR3_1_SEL, 0x00000023}, + {AUD_DN0_FREQ, 0x000035a3}, + {AUD_DN2_FREQ, 0x000029c7}, + {AUD_CRDC0_SRC_SEL, 0x00000511}, + {AUD_IIR1_0_SEL, 0x00000001}, + {AUD_IIR1_1_SEL, 0x00000000}, + {AUD_IIR3_2_SEL, 0x00000003}, + {AUD_IIR3_2_SHIFT, 0x00000000}, + {AUD_IIR3_0_SEL, 0x00000002}, + {AUD_IIR2_0_SEL, 0x00000021}, + {AUD_IIR2_0_SHIFT, 0x00000002}, + {AUD_DEEMPH0_SRC_SEL, 0x0000000b}, + {AUD_DEEMPH1_SRC_SEL, 0x0000000b}, + {AUD_POLYPH80SCALEFAC, 0x00000001}, + {AUD_START_TIMER, 0x00000000}, + { /* end of list */ }, + }; + + static const struct rlist am_l[] = { + {AUD_ERRLOGPERIOD_R, 0x00000064}, + {AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF}, + {AUD_ERRINTRPTTHSHLD2_R, 0x0000001F}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000000F}, + {AUD_PDF_DDS_CNST_BYTE2, 0x48}, + {AUD_PDF_DDS_CNST_BYTE1, 0x3D}, + {AUD_QAM_MODE, 0x00}, + {AUD_PDF_DDS_CNST_BYTE0, 0xf5}, + {AUD_PHACC_FREQ_8MSB, 0x3a}, + {AUD_PHACC_FREQ_8LSB, 0x4a}, + {AUD_DEEMPHGAIN_R, 0x00006680}, + {AUD_DEEMPHNUMER1_R, 0x000353DE}, + {AUD_DEEMPHNUMER2_R, 0x000001B1}, + {AUD_DEEMPHDENOM1_R, 0x0000F3D0}, + {AUD_DEEMPHDENOM2_R, 0x00000000}, + {AUD_FM_MODE_ENABLE, 0x00000007}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, + {AUD_AFE_12DB_EN, 0x00000001}, + {AAGC_GAIN, 0x00000000}, + {AAGC_HYST, 0x00000018}, + {AAGC_DEF, 0x00000020}, + {AUD_DN0_FREQ, 0x00000000}, + {AUD_POLY0_DDS_CONSTANT, 0x000E4DB2}, + {AUD_DCOC_0_SRC, 0x00000021}, + {AUD_IIR1_0_SEL, 0x00000000}, + {AUD_IIR1_0_SHIFT, 0x00000007}, + {AUD_IIR1_1_SEL, 0x00000002}, + {AUD_IIR1_1_SHIFT, 0x00000000}, + {AUD_DCOC_1_SRC, 0x00000003}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_DCOC_PASS_IN, 0x00000000}, + {AUD_IIR1_2_SEL, 0x00000023}, + {AUD_IIR1_2_SHIFT, 0x00000000}, + {AUD_IIR1_3_SEL, 0x00000004}, + {AUD_IIR1_3_SHIFT, 0x00000007}, + {AUD_IIR1_4_SEL, 0x00000005}, + {AUD_IIR1_4_SHIFT, 0x00000007}, + {AUD_IIR3_0_SEL, 0x00000007}, + {AUD_IIR3_0_SHIFT, 0x00000000}, + {AUD_DEEMPH0_SRC_SEL, 0x00000011}, + {AUD_DEEMPH0_SHIFT, 0x00000000}, + {AUD_DEEMPH0_G0, 0x00007000}, + {AUD_DEEMPH0_A0, 0x00000000}, + {AUD_DEEMPH0_B0, 0x00000000}, + {AUD_DEEMPH0_A1, 0x00000000}, + {AUD_DEEMPH0_B1, 0x00000000}, + {AUD_DEEMPH1_SRC_SEL, 0x00000011}, + {AUD_DEEMPH1_SHIFT, 0x00000000}, + {AUD_DEEMPH1_G0, 0x00007000}, + {AUD_DEEMPH1_A0, 0x00000000}, + {AUD_DEEMPH1_B0, 0x00000000}, + {AUD_DEEMPH1_A1, 0x00000000}, + {AUD_DEEMPH1_B1, 0x00000000}, + {AUD_OUT0_SEL, 0x0000003F}, + {AUD_OUT1_SEL, 0x0000003F}, + {AUD_DMD_RA_DDS, 0x00F5C285}, + {AUD_PLL_INT, 0x0000001E}, + {AUD_PLL_DDS, 0x00000000}, + {AUD_PLL_FRAC, 0x0000E542}, + {AUD_RATE_ADJ1, 0x00000100}, + {AUD_RATE_ADJ2, 0x00000200}, + {AUD_RATE_ADJ3, 0x00000300}, + {AUD_RATE_ADJ4, 0x00000400}, + {AUD_RATE_ADJ5, 0x00000500}, + {AUD_RATE_THRES_DMD, 0x000000C0}, + { /* end of list */ }, + }; + + static const struct rlist a2_deemph50[] = { + {AUD_DEEMPH0_G0, 0x00000380}, + {AUD_DEEMPH1_G0, 0x00000380}, + {AUD_DEEMPHGAIN_R, 0x000011e1}, + {AUD_DEEMPHNUMER1_R, 0x0002a7bc}, + {AUD_DEEMPHNUMER2_R, 0x0003023c}, + { /* end of list */ }, + }; + + set_audio_start(core, SEL_A2); + switch (core->tvaudio) { + case WW_BG: + dprintk("%s PAL-BG A1/2 (status: known-good)\n", __func__); + set_audio_registers(core, a2_bgdk_common); + set_audio_registers(core, a2_bg); + set_audio_registers(core, a2_deemph50); + break; + case WW_DK: + dprintk("%s PAL-DK A1/2 (status: known-good)\n", __func__); + set_audio_registers(core, a2_bgdk_common); + set_audio_registers(core, a2_dk); + set_audio_registers(core, a2_deemph50); + break; + case WW_I: + dprintk("%s PAL-I A1 (status: known-good)\n", __func__); + set_audio_registers(core, a1_i); + set_audio_registers(core, a2_deemph50); + break; + case WW_L: + dprintk("%s AM-L (status: devel)\n", __func__); + set_audio_registers(core, am_l); + break; + case WW_NONE: + case WW_BTSC: + case WW_EIAJ: + case WW_I2SPT: + case WW_FM: + case WW_I2SADC: + case WW_M: + dprintk("%s Warning: wrong value\n", __func__); + return; + break; + } + + mode |= EN_FMRADIO_EN_RDS | EN_DMTRX_SUMDIFF; + set_audio_finish(core, mode); +} + +static void set_audio_standard_EIAJ(struct cx88_core *core) +{ + static const struct rlist eiaj[] = { + /* TODO: eiaj register settings are not there yet ... */ + + { /* end of list */ }, + }; + dprintk("%s (status: unknown)\n", __func__); + + set_audio_start(core, SEL_EIAJ); + set_audio_registers(core, eiaj); + set_audio_finish(core, EN_EIAJ_AUTO_STEREO); +} + +static void set_audio_standard_FM(struct cx88_core *core, + enum cx88_deemph_type deemph) +{ + static const struct rlist fm_deemph_50[] = { + {AUD_DEEMPH0_G0, 0x0C45}, + {AUD_DEEMPH0_A0, 0x6262}, + {AUD_DEEMPH0_B0, 0x1C29}, + {AUD_DEEMPH0_A1, 0x3FC66}, + {AUD_DEEMPH0_B1, 0x399A}, + + {AUD_DEEMPH1_G0, 0x0D80}, + {AUD_DEEMPH1_A0, 0x6262}, + {AUD_DEEMPH1_B0, 0x1C29}, + {AUD_DEEMPH1_A1, 0x3FC66}, + {AUD_DEEMPH1_B1, 0x399A}, + + {AUD_POLYPH80SCALEFAC, 0x0003}, + { /* end of list */ }, + }; + static const struct rlist fm_deemph_75[] = { + {AUD_DEEMPH0_G0, 0x091B}, + {AUD_DEEMPH0_A0, 0x6B68}, + {AUD_DEEMPH0_B0, 0x11EC}, + {AUD_DEEMPH0_A1, 0x3FC66}, + {AUD_DEEMPH0_B1, 0x399A}, + + {AUD_DEEMPH1_G0, 0x0AA0}, + {AUD_DEEMPH1_A0, 0x6B68}, + {AUD_DEEMPH1_B0, 0x11EC}, + {AUD_DEEMPH1_A1, 0x3FC66}, + {AUD_DEEMPH1_B1, 0x399A}, + + {AUD_POLYPH80SCALEFAC, 0x0003}, + { /* end of list */ }, + }; + + /* It is enough to leave default values? */ + /* No, it's not! The deemphasis registers are reset to the 75us + * values by default. Analyzing the spectrum of the decoded audio + * reveals that "no deemphasis" is the same as 75 us, while the 50 us + * setting results in less deemphasis. */ + static const struct rlist fm_no_deemph[] = { + + {AUD_POLYPH80SCALEFAC, 0x0003}, + { /* end of list */ }, + }; + + dprintk("%s (status: unknown)\n", __func__); + set_audio_start(core, SEL_FMRADIO); + + switch (deemph) { + default: + case FM_NO_DEEMPH: + set_audio_registers(core, fm_no_deemph); + break; + + case FM_DEEMPH_50: + set_audio_registers(core, fm_deemph_50); + break; + + case FM_DEEMPH_75: + set_audio_registers(core, fm_deemph_75); + break; + } + + set_audio_finish(core, EN_FMRADIO_AUTO_STEREO); +} + +/* ----------------------------------------------------------- */ + +static int cx88_detect_nicam(struct cx88_core *core) +{ + int i, j = 0; + + dprintk("start nicam autodetect.\n"); + + for (i = 0; i < 6; i++) { + /* if bit1=1 then nicam is detected */ + j += ((cx_read(AUD_NICAM_STATUS2) & 0x02) >> 1); + + if (j == 1) { + dprintk("nicam is detected.\n"); + return 1; + } + + /* wait a little bit for next reading status */ + msleep(10); + } + + dprintk("nicam is not detected.\n"); + return 0; +} + +void cx88_set_tvaudio(struct cx88_core *core) +{ + switch (core->tvaudio) { + case WW_BTSC: + set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO); + break; + case WW_BG: + case WW_DK: + case WW_M: + case WW_I: + case WW_L: + /* prepare all dsp registers */ + set_audio_standard_A2(core, EN_A2_FORCE_MONO1); + + /* set nicam mode - otherwise + AUD_NICAM_STATUS2 contains wrong values */ + set_audio_standard_NICAM(core, EN_NICAM_AUTO_STEREO); + if (0 == cx88_detect_nicam(core)) { + /* fall back to fm / am mono */ + set_audio_standard_A2(core, EN_A2_FORCE_MONO1); + core->audiomode_current = V4L2_TUNER_MODE_MONO; + core->use_nicam = 0; + } else { + core->use_nicam = 1; + } + break; + case WW_EIAJ: + set_audio_standard_EIAJ(core); + break; + case WW_FM: + set_audio_standard_FM(core, radio_deemphasis); + break; + case WW_I2SADC: + set_audio_start(core, 0x01); + /* + * Slave/Philips/Autobaud + * NB on Nova-S bit1 NPhilipsSony appears to be inverted: + * 0= Sony, 1=Philips + */ + cx_write(AUD_I2SINPUTCNTL, core->board.i2sinputcntl); + /* Switch to "I2S ADC mode" */ + cx_write(AUD_I2SCNTL, 0x1); + set_audio_finish(core, EN_I2SIN_ENABLE); + break; + case WW_NONE: + case WW_I2SPT: + printk("%s/0: unknown tv audio mode [%d]\n", + core->name, core->tvaudio); + break; + } + return; +} + +void cx88_newstation(struct cx88_core *core) +{ + core->audiomode_manual = UNSET; + core->last_change = jiffies; +} + +void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t) +{ + static const char * const m[] = { "stereo", "dual mono", "mono", "sap" }; + static const char * const p[] = { "no pilot", "pilot c1", "pilot c2", "?" }; + u32 reg, mode, pilot; + + reg = cx_read(AUD_STATUS); + mode = reg & 0x03; + pilot = (reg >> 2) & 0x03; + + if (core->astat != reg) + dprintk("AUD_STATUS: 0x%x [%s/%s] ctl=%s\n", + reg, m[mode], p[pilot], + aud_ctl_names[cx_read(AUD_CTL) & 63]); + core->astat = reg; + + t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; + t->rxsubchans = UNSET; + t->audmode = V4L2_TUNER_MODE_MONO; + + switch (mode) { + case 0: + t->audmode = V4L2_TUNER_MODE_STEREO; + break; + case 1: + t->audmode = V4L2_TUNER_MODE_LANG2; + break; + case 2: + t->audmode = V4L2_TUNER_MODE_MONO; + break; + case 3: + t->audmode = V4L2_TUNER_MODE_SAP; + break; + } + + switch (core->tvaudio) { + case WW_BTSC: + case WW_BG: + case WW_DK: + case WW_M: + case WW_EIAJ: + if (!core->use_nicam) { + t->rxsubchans = cx88_dsp_detect_stereo_sap(core); + break; + } + break; + case WW_NONE: + case WW_I: + case WW_L: + case WW_I2SPT: + case WW_FM: + case WW_I2SADC: + /* nothing */ + break; + } + + /* If software stereo detection is not supported... */ + if (UNSET == t->rxsubchans) { + t->rxsubchans = V4L2_TUNER_SUB_MONO; + /* If the hardware itself detected stereo, also return + stereo as an available subchannel */ + if (V4L2_TUNER_MODE_STEREO == t->audmode) + t->rxsubchans |= V4L2_TUNER_SUB_STEREO; + } + return; +} + +void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) +{ + u32 ctl = UNSET; + u32 mask = UNSET; + + if (manual) { + core->audiomode_manual = mode; + } else { + if (UNSET != core->audiomode_manual) + return; + } + core->audiomode_current = mode; + + switch (core->tvaudio) { + case WW_BTSC: + switch (mode) { + case V4L2_TUNER_MODE_MONO: + set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_MONO); + break; + case V4L2_TUNER_MODE_LANG1: + set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO); + break; + case V4L2_TUNER_MODE_LANG2: + set_audio_standard_BTSC(core, 1, EN_BTSC_FORCE_SAP); + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_STEREO); + break; + } + break; + case WW_BG: + case WW_DK: + case WW_M: + case WW_I: + case WW_L: + if (1 == core->use_nicam) { + switch (mode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + set_audio_standard_NICAM(core, + EN_NICAM_FORCE_MONO1); + break; + case V4L2_TUNER_MODE_LANG2: + set_audio_standard_NICAM(core, + EN_NICAM_FORCE_MONO2); + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + set_audio_standard_NICAM(core, + EN_NICAM_FORCE_STEREO); + break; + } + } else { + if ((core->tvaudio == WW_I) || (core->tvaudio == WW_L)) { + /* fall back to fm / am mono */ + set_audio_standard_A2(core, EN_A2_FORCE_MONO1); + } else { + /* TODO: Add A2 autodection */ + mask = 0x3f; + switch (mode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + ctl = EN_A2_FORCE_MONO1; + break; + case V4L2_TUNER_MODE_LANG2: + ctl = EN_A2_FORCE_MONO2; + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + ctl = EN_A2_FORCE_STEREO; + break; + } + } + } + break; + case WW_FM: + switch (mode) { + case V4L2_TUNER_MODE_MONO: + ctl = EN_FMRADIO_FORCE_MONO; + mask = 0x3f; + break; + case V4L2_TUNER_MODE_STEREO: + ctl = EN_FMRADIO_AUTO_STEREO; + mask = 0x3f; + break; + } + break; + case WW_I2SADC: + case WW_NONE: + case WW_EIAJ: + case WW_I2SPT: + /* DO NOTHING */ + break; + } + + if (UNSET != ctl) { + dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x " + "[status=0x%x,ctl=0x%x,vol=0x%x]\n", + mask, ctl, cx_read(AUD_STATUS), + cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL)); + cx_andor(AUD_CTL, mask, ctl); + } + return; +} + +int cx88_audio_thread(void *data) +{ + struct cx88_core *core = data; + struct v4l2_tuner t; + u32 mode = 0; + + dprintk("cx88: tvaudio thread started\n"); + set_freezable(); + for (;;) { + msleep_interruptible(1000); + if (kthread_should_stop()) + break; + try_to_freeze(); + + switch (core->tvaudio) { + case WW_BG: + case WW_DK: + case WW_M: + case WW_I: + case WW_L: + if (core->use_nicam) + goto hw_autodetect; + + /* just monitor the audio status for now ... */ + memset(&t, 0, sizeof(t)); + cx88_get_stereo(core, &t); + + if (UNSET != core->audiomode_manual) + /* manually set, don't do anything. */ + continue; + + /* monitor signal and set stereo if available */ + if (t.rxsubchans & V4L2_TUNER_SUB_STEREO) + mode = V4L2_TUNER_MODE_STEREO; + else + mode = V4L2_TUNER_MODE_MONO; + if (mode == core->audiomode_current) + continue; + /* automatically switch to best available mode */ + cx88_set_stereo(core, mode, 0); + break; + case WW_NONE: + case WW_BTSC: + case WW_EIAJ: + case WW_I2SPT: + case WW_FM: + case WW_I2SADC: +hw_autodetect: + /* stereo autodetection is supported by hardware so + we don't need to do it manually. Do nothing. */ + break; + } + } + + dprintk("cx88: tvaudio thread exiting\n"); + return 0; +} + +/* ----------------------------------------------------------- */ + +EXPORT_SYMBOL(cx88_set_tvaudio); +EXPORT_SYMBOL(cx88_newstation); +EXPORT_SYMBOL(cx88_set_stereo); +EXPORT_SYMBOL(cx88_get_stereo); +EXPORT_SYMBOL(cx88_audio_thread); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off + */ diff --git a/drivers/media/pci/cx88/cx88-vbi.c b/drivers/media/pci/cx88/cx88-vbi.c new file mode 100644 index 00000000..f8f8389c --- /dev/null +++ b/drivers/media/pci/cx88/cx88-vbi.c @@ -0,0 +1,245 @@ +/* + */ +#include +#include +#include + +#include "cx88.h" + +static unsigned int vbibufs = 4; +module_param(vbibufs,int,0644); +MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32"); + +static unsigned int vbi_debug; +module_param(vbi_debug,int,0644); +MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]"); + +#define dprintk(level,fmt, arg...) if (vbi_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, dev->core->name , ## arg) + +/* ------------------------------------------------------------------ */ + +int cx8800_vbi_fmt (struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx8800_fh *fh = priv; + struct cx8800_dev *dev = fh->dev; + + f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH; + f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; + f->fmt.vbi.offset = 244; + f->fmt.vbi.count[0] = VBI_LINE_COUNT; + f->fmt.vbi.count[1] = VBI_LINE_COUNT; + + if (dev->core->tvnorm & V4L2_STD_525_60) { + /* ntsc */ + f->fmt.vbi.sampling_rate = 28636363; + f->fmt.vbi.start[0] = 10; + f->fmt.vbi.start[1] = 273; + + } else if (dev->core->tvnorm & V4L2_STD_625_50) { + /* pal */ + f->fmt.vbi.sampling_rate = 35468950; + f->fmt.vbi.start[0] = 7 -1; + f->fmt.vbi.start[1] = 319 -1; + } + return 0; +} + +static int cx8800_start_vbi_dma(struct cx8800_dev *dev, + struct cx88_dmaqueue *q, + struct cx88_buffer *buf) +{ + struct cx88_core *core = dev->core; + + /* setup fifo + format */ + cx88_sram_channel_setup(dev->core, &cx88_sram_channels[SRAM_CH24], + buf->vb.width, buf->risc.dma); + + cx_write(MO_VBOS_CONTROL, ( (1 << 18) | // comb filter delay fixup + (1 << 15) | // enable vbi capture + (1 << 11) )); + + /* reset counter */ + cx_write(MO_VBI_GPCNTRL, GP_COUNT_CONTROL_RESET); + q->count = 1; + + /* enable irqs */ + cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT); + cx_set(MO_VID_INTMSK, 0x0f0088); + + /* enable capture */ + cx_set(VID_CAPTURE_CONTROL,0x18); + + /* start dma */ + cx_set(MO_DEV_CNTRL2, (1<<5)); + cx_set(MO_VID_DMACNTRL, 0x88); + + return 0; +} + +int cx8800_stop_vbi_dma(struct cx8800_dev *dev) +{ + struct cx88_core *core = dev->core; + + /* stop dma */ + cx_clear(MO_VID_DMACNTRL, 0x88); + + /* disable capture */ + cx_clear(VID_CAPTURE_CONTROL,0x18); + + /* disable irqs */ + cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT); + cx_clear(MO_VID_INTMSK, 0x0f0088); + return 0; +} + +int cx8800_restart_vbi_queue(struct cx8800_dev *dev, + struct cx88_dmaqueue *q) +{ + struct cx88_buffer *buf; + + if (list_empty(&q->active)) + return 0; + + buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); + dprintk(2,"restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx8800_start_vbi_dma(dev, q, buf); + list_for_each_entry(buf, &q->active, vb.queue) + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + return 0; +} + +void cx8800_vbi_timeout(unsigned long data) +{ + struct cx8800_dev *dev = (struct cx8800_dev*)data; + struct cx88_core *core = dev->core; + struct cx88_dmaqueue *q = &dev->vbiq; + struct cx88_buffer *buf; + unsigned long flags; + + cx88_sram_channel_dump(dev->core, &cx88_sram_channels[SRAM_CH24]); + + cx_clear(MO_VID_DMACNTRL, 0x88); + cx_clear(VID_CAPTURE_CONTROL, 0x18); + + spin_lock_irqsave(&dev->slock,flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", dev->core->name, + buf, buf->vb.i, (unsigned long)buf->risc.dma); + } + cx8800_restart_vbi_queue(dev,q); + spin_unlock_irqrestore(&dev->slock,flags); +} + +/* ------------------------------------------------------------------ */ + +static int +vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + *size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; + if (0 == *count) + *count = vbibufs; + if (*count < 2) + *count = 2; + if (*count > 32) + *count = 32; + return 0; +} + +static int +vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx8800_fh *fh = q->priv_data; + struct cx8800_dev *dev = fh->dev; + struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + unsigned int size; + int rc; + + size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + buf->vb.width = VBI_LINE_LENGTH; + buf->vb.height = VBI_LINE_COUNT; + buf->vb.size = size; + buf->vb.field = V4L2_FIELD_SEQ_TB; + + if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL))) + goto fail; + cx88_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->vb.width * buf->vb.height, + buf->vb.width, 0, + buf->vb.height); + } + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx88_free_buffer(q,buf); + return rc; +} + +static void +vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + struct cx88_buffer *prev; + struct cx8800_fh *fh = vq->priv_data; + struct cx8800_dev *dev = fh->dev; + struct cx88_dmaqueue *q = &dev->vbiq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + + if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue,&q->active); + cx8800_start_vbi_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2,"[%p/%d] vbi_queue - first active\n", + buf, buf->vb.i); + + } else { + prev = list_entry(q->active.prev, struct cx88_buffer, vb.queue); + list_add_tail(&buf->vb.queue,&q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + dprintk(2,"[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + } +} + +static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + + cx88_free_buffer(q,buf); +} + +const struct videobuf_queue_ops cx8800_vbi_qops = { + .buf_setup = vbi_setup, + .buf_prepare = vbi_prepare, + .buf_queue = vbi_queue, + .buf_release = vbi_release, +}; + +/* ------------------------------------------------------------------ */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c new file mode 100644 index 00000000..c7a9be10 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-video.c @@ -0,0 +1,2072 @@ +/* + * + * device driver for Conexant 2388x based TV cards + * video4linux video interface + * + * (c) 2003-04 Gerd Knorr [SuSE Labs] + * + * (c) 2005-2006 Mauro Carvalho Chehab + * - Multituner support + * - video_ioctl2 conversion + * - PAL/M fixes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx88.h" +#include +#include +#include +#include + +MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards"); +MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); + +/* ------------------------------------------------------------------ */ + +static unsigned int video_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; +static unsigned int vbi_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; +static unsigned int radio_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; + +module_param_array(video_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); +module_param_array(radio_nr, int, NULL, 0444); + +MODULE_PARM_DESC(video_nr,"video device numbers"); +MODULE_PARM_DESC(vbi_nr,"vbi device numbers"); +MODULE_PARM_DESC(radio_nr,"radio device numbers"); + +static unsigned int video_debug; +module_param(video_debug,int,0644); +MODULE_PARM_DESC(video_debug,"enable debug messages [video]"); + +static unsigned int irq_debug; +module_param(irq_debug,int,0644); +MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]"); + +static unsigned int vid_limit = 16; +module_param(vid_limit,int,0644); +MODULE_PARM_DESC(vid_limit,"capture memory limit in megabytes"); + +#define dprintk(level,fmt, arg...) if (video_debug >= level) \ + printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg) + +/* ------------------------------------------------------------------- */ +/* static data */ + +static const struct cx8800_fmt formats[] = { + { + .name = "8 bpp, gray", + .fourcc = V4L2_PIX_FMT_GREY, + .cxformat = ColorFormatY8, + .depth = 8, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "15 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB555, + .cxformat = ColorFormatRGB15, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "15 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB555X, + .cxformat = ColorFormatRGB15 | ColorFormatBSWAP, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "16 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB565, + .cxformat = ColorFormatRGB16, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "16 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB565X, + .cxformat = ColorFormatRGB16 | ColorFormatBSWAP, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "24 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR24, + .cxformat = ColorFormatRGB24, + .depth = 24, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "32 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR32, + .cxformat = ColorFormatRGB32, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "32 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB32, + .cxformat = ColorFormatRGB32 | ColorFormatBSWAP | ColorFormatWSWAP, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .cxformat = ColorFormatYUY2, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + },{ + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .cxformat = ColorFormatYUY2 | ColorFormatBSWAP, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, +}; + +static const struct cx8800_fmt* format_by_fourcc(unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) + if (formats[i].fourcc == fourcc) + return formats+i; + return NULL; +} + +/* ------------------------------------------------------------------- */ + +struct cx88_ctrl { + /* control information */ + u32 id; + s32 minimum; + s32 maximum; + u32 step; + s32 default_value; + + /* control register information */ + u32 off; + u32 reg; + u32 sreg; + u32 mask; + u32 shift; +}; + +static const struct cx88_ctrl cx8800_vid_ctls[] = { + /* --- video --- */ + { + .id = V4L2_CID_BRIGHTNESS, + .minimum = 0x00, + .maximum = 0xff, + .step = 1, + .default_value = 0x7f, + .off = 128, + .reg = MO_CONTR_BRIGHT, + .mask = 0x00ff, + .shift = 0, + },{ + .id = V4L2_CID_CONTRAST, + .minimum = 0, + .maximum = 0xff, + .step = 1, + .default_value = 0x3f, + .off = 0, + .reg = MO_CONTR_BRIGHT, + .mask = 0xff00, + .shift = 8, + },{ + .id = V4L2_CID_HUE, + .minimum = 0, + .maximum = 0xff, + .step = 1, + .default_value = 0x7f, + .off = 128, + .reg = MO_HUE, + .mask = 0x00ff, + .shift = 0, + },{ + /* strictly, this only describes only U saturation. + * V saturation is handled specially through code. + */ + .id = V4L2_CID_SATURATION, + .minimum = 0, + .maximum = 0xff, + .step = 1, + .default_value = 0x7f, + .off = 0, + .reg = MO_UV_SATURATION, + .mask = 0x00ff, + .shift = 0, + }, { + .id = V4L2_CID_SHARPNESS, + .minimum = 0, + .maximum = 4, + .step = 1, + .default_value = 0x0, + .off = 0, + /* NOTE: the value is converted and written to both even + and odd registers in the code */ + .reg = MO_FILTER_ODD, + .mask = 7 << 7, + .shift = 7, + }, { + .id = V4L2_CID_CHROMA_AGC, + .minimum = 0, + .maximum = 1, + .default_value = 0x1, + .reg = MO_INPUT_FORMAT, + .mask = 1 << 10, + .shift = 10, + }, { + .id = V4L2_CID_COLOR_KILLER, + .minimum = 0, + .maximum = 1, + .default_value = 0x1, + .reg = MO_INPUT_FORMAT, + .mask = 1 << 9, + .shift = 9, + }, { + .id = V4L2_CID_BAND_STOP_FILTER, + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0x0, + .off = 0, + .reg = MO_HTOTAL, + .mask = 3 << 11, + .shift = 11, + } +}; + +static const struct cx88_ctrl cx8800_aud_ctls[] = { + { + /* --- audio --- */ + .id = V4L2_CID_AUDIO_MUTE, + .minimum = 0, + .maximum = 1, + .default_value = 1, + .reg = AUD_VOL_CTL, + .sreg = SHADOW_AUD_VOL_CTL, + .mask = (1 << 6), + .shift = 6, + },{ + .id = V4L2_CID_AUDIO_VOLUME, + .minimum = 0, + .maximum = 0x3f, + .step = 1, + .default_value = 0x3f, + .reg = AUD_VOL_CTL, + .sreg = SHADOW_AUD_VOL_CTL, + .mask = 0x3f, + .shift = 0, + },{ + .id = V4L2_CID_AUDIO_BALANCE, + .minimum = 0, + .maximum = 0x7f, + .step = 1, + .default_value = 0x40, + .reg = AUD_BAL_CTL, + .sreg = SHADOW_AUD_BAL_CTL, + .mask = 0x7f, + .shift = 0, + } +}; + +enum { + CX8800_VID_CTLS = ARRAY_SIZE(cx8800_vid_ctls), + CX8800_AUD_CTLS = ARRAY_SIZE(cx8800_aud_ctls), +}; + +/* ------------------------------------------------------------------- */ +/* resource management */ + +static int res_get(struct cx8800_dev *dev, struct cx8800_fh *fh, unsigned int bit) +{ + struct cx88_core *core = dev->core; + if (fh->resources & bit) + /* have it already allocated */ + return 1; + + /* is it free? */ + mutex_lock(&core->lock); + if (dev->resources & bit) { + /* no, someone else uses it */ + mutex_unlock(&core->lock); + return 0; + } + /* it's free, grab it */ + fh->resources |= bit; + dev->resources |= bit; + dprintk(1,"res: get %d\n",bit); + mutex_unlock(&core->lock); + return 1; +} + +static +int res_check(struct cx8800_fh *fh, unsigned int bit) +{ + return (fh->resources & bit); +} + +static +int res_locked(struct cx8800_dev *dev, unsigned int bit) +{ + return (dev->resources & bit); +} + +static +void res_free(struct cx8800_dev *dev, struct cx8800_fh *fh, unsigned int bits) +{ + struct cx88_core *core = dev->core; + BUG_ON((fh->resources & bits) != bits); + + mutex_lock(&core->lock); + fh->resources &= ~bits; + dev->resources &= ~bits; + dprintk(1,"res: put %d\n",bits); + mutex_unlock(&core->lock); +} + +/* ------------------------------------------------------------------ */ + +int cx88_video_mux(struct cx88_core *core, unsigned int input) +{ + /* struct cx88_core *core = dev->core; */ + + dprintk(1,"video_mux: %d [vmux=%d,gpio=0x%x,0x%x,0x%x,0x%x]\n", + input, INPUT(input).vmux, + INPUT(input).gpio0,INPUT(input).gpio1, + INPUT(input).gpio2,INPUT(input).gpio3); + core->input = input; + cx_andor(MO_INPUT_FORMAT, 0x03 << 14, INPUT(input).vmux << 14); + cx_write(MO_GP3_IO, INPUT(input).gpio3); + cx_write(MO_GP0_IO, INPUT(input).gpio0); + cx_write(MO_GP1_IO, INPUT(input).gpio1); + cx_write(MO_GP2_IO, INPUT(input).gpio2); + + switch (INPUT(input).type) { + case CX88_VMUX_SVIDEO: + cx_set(MO_AFECFG_IO, 0x00000001); + cx_set(MO_INPUT_FORMAT, 0x00010010); + cx_set(MO_FILTER_EVEN, 0x00002020); + cx_set(MO_FILTER_ODD, 0x00002020); + break; + default: + cx_clear(MO_AFECFG_IO, 0x00000001); + cx_clear(MO_INPUT_FORMAT, 0x00010010); + cx_clear(MO_FILTER_EVEN, 0x00002020); + cx_clear(MO_FILTER_ODD, 0x00002020); + break; + } + + /* if there are audioroutes defined, we have an external + ADC to deal with audio */ + if (INPUT(input).audioroute) { + /* The wm8775 module has the "2" route hardwired into + the initialization. Some boards may use different + routes for different inputs. HVR-1300 surely does */ + if (core->sd_wm8775) { + call_all(core, audio, s_routing, + INPUT(input).audioroute, 0, 0); + } + /* cx2388's C-ADC is connected to the tuner only. + When used with S-Video, that ADC is busy dealing with + chroma, so an external must be used for baseband audio */ + if (INPUT(input).type != CX88_VMUX_TELEVISION && + INPUT(input).type != CX88_VMUX_CABLE) { + /* "I2S ADC mode" */ + core->tvaudio = WW_I2SADC; + cx88_set_tvaudio(core); + } else { + /* Normal mode */ + cx_write(AUD_I2SCNTL, 0x0); + cx_clear(AUD_CTL, EN_I2SIN_ENABLE); + } + } + + return 0; +} +EXPORT_SYMBOL(cx88_video_mux); + +/* ------------------------------------------------------------------ */ + +static int start_video_dma(struct cx8800_dev *dev, + struct cx88_dmaqueue *q, + struct cx88_buffer *buf) +{ + struct cx88_core *core = dev->core; + + /* setup fifo + format */ + cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH21], + buf->bpl, buf->risc.dma); + cx88_set_scale(core, buf->vb.width, buf->vb.height, buf->vb.field); + cx_write(MO_COLOR_CTRL, buf->fmt->cxformat | ColorFormatGamma); + + /* reset counter */ + cx_write(MO_VIDY_GPCNTRL,GP_COUNT_CONTROL_RESET); + q->count = 1; + + /* enable irqs */ + cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT); + + /* Enables corresponding bits at PCI_INT_STAT: + bits 0 to 4: video, audio, transport stream, VIP, Host + bit 7: timer + bits 8 and 9: DMA complete for: SRC, DST + bits 10 and 11: BERR signal asserted for RISC: RD, WR + bits 12 to 15: BERR signal asserted for: BRDG, SRC, DST, IPB + */ + cx_set(MO_VID_INTMSK, 0x0f0011); + + /* enable capture */ + cx_set(VID_CAPTURE_CONTROL,0x06); + + /* start dma */ + cx_set(MO_DEV_CNTRL2, (1<<5)); + cx_set(MO_VID_DMACNTRL, 0x11); /* Planar Y and packed FIFO and RISC enable */ + + return 0; +} + +#ifdef CONFIG_PM +static int stop_video_dma(struct cx8800_dev *dev) +{ + struct cx88_core *core = dev->core; + + /* stop dma */ + cx_clear(MO_VID_DMACNTRL, 0x11); + + /* disable capture */ + cx_clear(VID_CAPTURE_CONTROL,0x06); + + /* disable irqs */ + cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT); + cx_clear(MO_VID_INTMSK, 0x0f0011); + return 0; +} +#endif + +static int restart_video_queue(struct cx8800_dev *dev, + struct cx88_dmaqueue *q) +{ + struct cx88_core *core = dev->core; + struct cx88_buffer *buf, *prev; + + if (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); + dprintk(2,"restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + start_video_dma(dev, q, buf); + list_for_each_entry(buf, &q->active, vb.queue) + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + return 0; + } + + prev = NULL; + for (;;) { + if (list_empty(&q->queued)) + return 0; + buf = list_entry(q->queued.next, struct cx88_buffer, vb.queue); + if (NULL == prev) { + list_move_tail(&buf->vb.queue, &q->active); + start_video_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2,"[%p/%d] restart_queue - first active\n", + buf,buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_move_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + dprintk(2,"[%p/%d] restart_queue - move to active\n", + buf,buf->vb.i); + } else { + return 0; + } + prev = buf; + } +} + +/* ------------------------------------------------------------------ */ + +static int +buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + struct cx8800_fh *fh = q->priv_data; + struct cx8800_dev *dev = fh->dev; + + *size = dev->fmt->depth * dev->width * dev->height >> 3; + if (0 == *count) + *count = 32; + if (*size * *count > vid_limit * 1024 * 1024) + *count = (vid_limit * 1024 * 1024) / *size; + return 0; +} + +static int +buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx8800_fh *fh = q->priv_data; + struct cx8800_dev *dev = fh->dev; + struct cx88_core *core = dev->core; + struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + int rc, init_buffer = 0; + + BUG_ON(NULL == dev->fmt); + if (dev->width < 48 || dev->width > norm_maxw(core->tvnorm) || + dev->height < 32 || dev->height > norm_maxh(core->tvnorm)) + return -EINVAL; + buf->vb.size = (dev->width * dev->height * dev->fmt->depth) >> 3; + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != dev->fmt || + buf->vb.width != dev->width || + buf->vb.height != dev->height || + buf->vb.field != field) { + buf->fmt = dev->fmt; + buf->vb.width = dev->width; + buf->vb.height = dev->height; + buf->vb.field = field; + init_buffer = 1; + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + init_buffer = 1; + if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL))) + goto fail; + } + + if (init_buffer) { + buf->bpl = buf->vb.width * buf->fmt->depth >> 3; + switch (buf->vb.field) { + case V4L2_FIELD_TOP: + cx88_risc_buffer(dev->pci, &buf->risc, + dma->sglist, 0, UNSET, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_BOTTOM: + cx88_risc_buffer(dev->pci, &buf->risc, + dma->sglist, UNSET, 0, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_INTERLACED: + cx88_risc_buffer(dev->pci, &buf->risc, + dma->sglist, 0, buf->bpl, + buf->bpl, buf->bpl, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_TB: + cx88_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->bpl * (buf->vb.height >> 1), + buf->bpl, 0, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_BT: + cx88_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + buf->bpl * (buf->vb.height >> 1), 0, + buf->bpl, 0, + buf->vb.height >> 1); + break; + default: + BUG(); + } + } + dprintk(2,"[%p/%d] buffer_prepare - %dx%d %dbpp \"%s\" - dma=0x%08lx\n", + buf, buf->vb.i, + dev->width, dev->height, dev->fmt->depth, dev->fmt->name, + (unsigned long)buf->risc.dma); + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx88_free_buffer(q,buf); + return rc; +} + +static void +buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + struct cx88_buffer *prev; + struct cx8800_fh *fh = vq->priv_data; + struct cx8800_dev *dev = fh->dev; + struct cx88_core *core = dev->core; + struct cx88_dmaqueue *q = &dev->vidq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + + if (!list_empty(&q->queued)) { + list_add_tail(&buf->vb.queue,&q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2,"[%p/%d] buffer_queue - append to queued\n", + buf, buf->vb.i); + + } else if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue,&q->active); + start_video_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2,"[%p/%d] buffer_queue - first active\n", + buf, buf->vb.i); + + } else { + prev = list_entry(q->active.prev, struct cx88_buffer, vb.queue); + if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_add_tail(&buf->vb.queue,&q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + dprintk(2,"[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + + } else { + list_add_tail(&buf->vb.queue,&q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2,"[%p/%d] buffer_queue - first queued\n", + buf, buf->vb.i); + } + } +} + +static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + + cx88_free_buffer(q,buf); +} + +static const struct videobuf_queue_ops cx8800_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* ------------------------------------------------------------------ */ + + +/* ------------------------------------------------------------------ */ + +static struct videobuf_queue *get_queue(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct cx8800_fh *fh = file->private_data; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + return &fh->vidq; + case VFL_TYPE_VBI: + return &fh->vbiq; + default: + BUG(); + return NULL; + } +} + +static int get_resource(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + return RESOURCE_VIDEO; + case VFL_TYPE_VBI: + return RESOURCE_VBI; + default: + BUG(); + return 0; + } +} + +static int video_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct cx8800_dev *dev = video_drvdata(file); + struct cx88_core *core = dev->core; + struct cx8800_fh *fh; + enum v4l2_buf_type type = 0; + int radio = 0; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + break; + case VFL_TYPE_VBI: + type = V4L2_BUF_TYPE_VBI_CAPTURE; + break; + case VFL_TYPE_RADIO: + radio = 1; + break; + } + + dprintk(1, "open dev=%s radio=%d type=%s\n", + video_device_node_name(vdev), radio, v4l2_type_names[type]); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh),GFP_KERNEL); + if (unlikely(!fh)) + return -ENOMEM; + + v4l2_fh_init(&fh->fh, vdev); + file->private_data = fh; + fh->dev = dev; + + mutex_lock(&core->lock); + + videobuf_queue_sg_init(&fh->vidq, &cx8800_video_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx88_buffer), + fh, NULL); + videobuf_queue_sg_init(&fh->vbiq, &cx8800_vbi_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_FIELD_SEQ_TB, + sizeof(struct cx88_buffer), + fh, NULL); + + if (vdev->vfl_type == VFL_TYPE_RADIO) { + dprintk(1,"video_open: setting radio device\n"); + cx_write(MO_GP3_IO, core->board.radio.gpio3); + cx_write(MO_GP0_IO, core->board.radio.gpio0); + cx_write(MO_GP1_IO, core->board.radio.gpio1); + cx_write(MO_GP2_IO, core->board.radio.gpio2); + if (core->board.radio.audioroute) { + if (core->sd_wm8775) { + call_all(core, audio, s_routing, + core->board.radio.audioroute, 0, 0); + } + /* "I2S ADC mode" */ + core->tvaudio = WW_I2SADC; + cx88_set_tvaudio(core); + } else { + /* FM Mode */ + core->tvaudio = WW_FM; + cx88_set_tvaudio(core); + cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1); + } + call_all(core, tuner, s_radio); + } + + core->users++; + mutex_unlock(&core->lock); + v4l2_fh_add(&fh->fh); + + return 0; +} + +static ssize_t +video_read(struct file *file, char __user *data, size_t count, loff_t *ppos) +{ + struct video_device *vdev = video_devdata(file); + struct cx8800_fh *fh = file->private_data; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + if (res_locked(fh->dev,RESOURCE_VIDEO)) + return -EBUSY; + return videobuf_read_one(&fh->vidq, data, count, ppos, + file->f_flags & O_NONBLOCK); + case VFL_TYPE_VBI: + if (!res_get(fh->dev,fh,RESOURCE_VBI)) + return -EBUSY; + return videobuf_read_stream(&fh->vbiq, data, count, ppos, 1, + file->f_flags & O_NONBLOCK); + default: + BUG(); + return 0; + } +} + +static unsigned int +video_poll(struct file *file, struct poll_table_struct *wait) +{ + struct video_device *vdev = video_devdata(file); + struct cx8800_fh *fh = file->private_data; + struct cx88_buffer *buf; + unsigned int rc = v4l2_ctrl_poll(file, wait); + + if (vdev->vfl_type == VFL_TYPE_VBI) { + if (!res_get(fh->dev,fh,RESOURCE_VBI)) + return rc | POLLERR; + return rc | videobuf_poll_stream(file, &fh->vbiq, wait); + } + mutex_lock(&fh->vidq.vb_lock); + if (res_check(fh,RESOURCE_VIDEO)) { + /* streaming capture */ + if (list_empty(&fh->vidq.stream)) + goto done; + buf = list_entry(fh->vidq.stream.next,struct cx88_buffer,vb.stream); + } else { + /* read() capture */ + buf = (struct cx88_buffer*)fh->vidq.read_buf; + if (NULL == buf) + goto done; + } + poll_wait(file, &buf->vb.done, wait); + if (buf->vb.state == VIDEOBUF_DONE || + buf->vb.state == VIDEOBUF_ERROR) + rc |= POLLIN|POLLRDNORM; +done: + mutex_unlock(&fh->vidq.vb_lock); + return rc; +} + +static int video_release(struct file *file) +{ + struct cx8800_fh *fh = file->private_data; + struct cx8800_dev *dev = fh->dev; + + /* turn off overlay */ + if (res_check(fh, RESOURCE_OVERLAY)) { + /* FIXME */ + res_free(dev,fh,RESOURCE_OVERLAY); + } + + /* stop video capture */ + if (res_check(fh, RESOURCE_VIDEO)) { + videobuf_queue_cancel(&fh->vidq); + res_free(dev,fh,RESOURCE_VIDEO); + } + if (fh->vidq.read_buf) { + buffer_release(&fh->vidq,fh->vidq.read_buf); + kfree(fh->vidq.read_buf); + } + + /* stop vbi capture */ + if (res_check(fh, RESOURCE_VBI)) { + videobuf_stop(&fh->vbiq); + res_free(dev,fh,RESOURCE_VBI); + } + + videobuf_mmap_free(&fh->vidq); + videobuf_mmap_free(&fh->vbiq); + + mutex_lock(&dev->core->lock); + v4l2_fh_del(&fh->fh); + v4l2_fh_exit(&fh->fh); + file->private_data = NULL; + kfree(fh); + + dev->core->users--; + if (!dev->core->users) + call_all(dev->core, core, s_power, 0); + mutex_unlock(&dev->core->lock); + + return 0; +} + +static int +video_mmap(struct file *file, struct vm_area_struct * vma) +{ + return videobuf_mmap_mapper(get_queue(file), vma); +} + +/* ------------------------------------------------------------------ */ +/* VIDEO CTRL IOCTLS */ + +static int cx8800_s_vid_ctrl(struct v4l2_ctrl *ctrl) +{ + struct cx88_core *core = + container_of(ctrl->handler, struct cx88_core, video_hdl); + const struct cx88_ctrl *cc = ctrl->priv; + u32 value, mask; + + mask = cc->mask; + switch (ctrl->id) { + case V4L2_CID_SATURATION: + /* special v_sat handling */ + + value = ((ctrl->val - cc->off) << cc->shift) & cc->mask; + + if (core->tvnorm & V4L2_STD_SECAM) { + /* For SECAM, both U and V sat should be equal */ + value = value << 8 | value; + } else { + /* Keeps U Saturation proportional to V Sat */ + value = (value * 0x5a) / 0x7f << 8 | value; + } + mask = 0xffff; + break; + case V4L2_CID_SHARPNESS: + /* 0b000, 0b100, 0b101, 0b110, or 0b111 */ + value = (ctrl->val < 1 ? 0 : ((ctrl->val + 3) << 7)); + /* needs to be set for both fields */ + cx_andor(MO_FILTER_EVEN, mask, value); + break; + case V4L2_CID_CHROMA_AGC: + value = ((ctrl->val - cc->off) << cc->shift) & cc->mask; + break; + default: + value = ((ctrl->val - cc->off) << cc->shift) & cc->mask; + break; + } + dprintk(1, "set_control id=0x%X(%s) ctrl=0x%02x, reg=0x%02x val=0x%02x (mask 0x%02x)%s\n", + ctrl->id, ctrl->name, ctrl->val, cc->reg, value, + mask, cc->sreg ? " [shadowed]" : ""); + if (cc->sreg) + cx_sandor(cc->sreg, cc->reg, mask, value); + else + cx_andor(cc->reg, mask, value); + return 0; +} + +static int cx8800_s_aud_ctrl(struct v4l2_ctrl *ctrl) +{ + struct cx88_core *core = + container_of(ctrl->handler, struct cx88_core, audio_hdl); + const struct cx88_ctrl *cc = ctrl->priv; + u32 value,mask; + + /* Pass changes onto any WM8775 */ + if (core->sd_wm8775) { + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + wm8775_s_ctrl(core, ctrl->id, ctrl->val); + break; + case V4L2_CID_AUDIO_VOLUME: + wm8775_s_ctrl(core, ctrl->id, (ctrl->val) ? + (0x90 + ctrl->val) << 8 : 0); + break; + case V4L2_CID_AUDIO_BALANCE: + wm8775_s_ctrl(core, ctrl->id, ctrl->val << 9); + break; + default: + break; + } + } + + mask = cc->mask; + switch (ctrl->id) { + case V4L2_CID_AUDIO_BALANCE: + value = (ctrl->val < 0x40) ? (0x7f - ctrl->val) : (ctrl->val - 0x40); + break; + case V4L2_CID_AUDIO_VOLUME: + value = 0x3f - (ctrl->val & 0x3f); + break; + default: + value = ((ctrl->val - cc->off) << cc->shift) & cc->mask; + break; + } + dprintk(1,"set_control id=0x%X(%s) ctrl=0x%02x, reg=0x%02x val=0x%02x (mask 0x%02x)%s\n", + ctrl->id, ctrl->name, ctrl->val, cc->reg, value, + mask, cc->sreg ? " [shadowed]" : ""); + if (cc->sreg) + cx_sandor(cc->sreg, cc->reg, mask, value); + else + cx_andor(cc->reg, mask, value); + return 0; +} + +/* ------------------------------------------------------------------ */ +/* VIDEO IOCTLS */ + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx8800_fh *fh = priv; + struct cx8800_dev *dev = fh->dev; + + f->fmt.pix.width = dev->width; + f->fmt.pix.height = dev->height; + f->fmt.pix.field = fh->vidq.field; + f->fmt.pix.pixelformat = dev->fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * dev->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + const struct cx8800_fmt *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + + field = f->fmt.pix.field; + maxw = norm_maxw(core->tvnorm); + maxh = norm_maxh(core->tvnorm); + + if (V4L2_FIELD_ANY == field) { + field = (f->fmt.pix.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; + } + + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } + + f->fmt.pix.field = field; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx8800_fh *fh = priv; + struct cx8800_dev *dev = fh->dev; + int err = vidioc_try_fmt_vid_cap (file,priv,f); + + if (0 != err) + return err; + dev->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + dev->width = f->fmt.pix.width; + dev->height = f->fmt.pix.height; + fh->vidq.field = f->fmt.pix.field; + return 0; +} + +void cx88_querycap(struct file *file, struct cx88_core *core, + struct v4l2_capability *cap) +{ + struct video_device *vdev = video_devdata(file); + + strlcpy(cap->card, core->board.name, sizeof(cap->card)); + cap->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + if (UNSET != core->board.tuner_type) + cap->device_caps |= V4L2_CAP_TUNER; + switch (vdev->vfl_type) { + case VFL_TYPE_RADIO: + cap->device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER; + break; + case VFL_TYPE_GRABBER: + cap->device_caps |= V4L2_CAP_VIDEO_CAPTURE; + break; + case VFL_TYPE_VBI: + cap->device_caps |= V4L2_CAP_VBI_CAPTURE; + break; + } + cap->capabilities = cap->device_caps | V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_VBI_CAPTURE | V4L2_CAP_DEVICE_CAPS; + if (core->board.radio.type == CX88_RADIO) + cap->capabilities |= V4L2_CAP_RADIO; +} +EXPORT_SYMBOL(cx88_querycap); + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx8800_dev *dev = ((struct cx8800_fh *)priv)->dev; + struct cx88_core *core = dev->core; + + strcpy(cap->driver, "cx8800"); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cx88_querycap(file, core, cap); + return 0; +} + +static int vidioc_enum_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (unlikely(f->index >= ARRAY_SIZE(formats))) + return -EINVAL; + + strlcpy(f->description,formats[f->index].name,sizeof(f->description)); + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +static int vidioc_reqbufs (struct file *file, void *priv, struct v4l2_requestbuffers *p) +{ + return videobuf_reqbufs(get_queue(file), p); +} + +static int vidioc_querybuf (struct file *file, void *priv, struct v4l2_buffer *p) +{ + return videobuf_querybuf(get_queue(file), p); +} + +static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *p) +{ + return videobuf_qbuf(get_queue(file), p); +} + +static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) +{ + return videobuf_dqbuf(get_queue(file), p, + file->f_flags & O_NONBLOCK); +} + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct video_device *vdev = video_devdata(file); + struct cx8800_fh *fh = priv; + struct cx8800_dev *dev = fh->dev; + + if ((vdev->vfl_type == VFL_TYPE_GRABBER && i != V4L2_BUF_TYPE_VIDEO_CAPTURE) || + (vdev->vfl_type == VFL_TYPE_VBI && i != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + + if (unlikely(!res_get(dev, fh, get_resource(file)))) + return -EBUSY; + return videobuf_streamon(get_queue(file)); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct video_device *vdev = video_devdata(file); + struct cx8800_fh *fh = priv; + struct cx8800_dev *dev = fh->dev; + int err, res; + + if ((vdev->vfl_type == VFL_TYPE_GRABBER && i != V4L2_BUF_TYPE_VIDEO_CAPTURE) || + (vdev->vfl_type == VFL_TYPE_VBI && i != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + + res = get_resource(file); + err = videobuf_streamoff(get_queue(file)); + if (err < 0) + return err; + res_free(dev,fh,res); + return 0; +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *tvnorm) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + + *tvnorm = core->tvnorm; + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id tvnorms) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + + mutex_lock(&core->lock); + cx88_set_tvnorm(core, tvnorms); + mutex_unlock(&core->lock); + + return 0; +} + +/* only one input in this sample driver */ +int cx88_enum_input (struct cx88_core *core,struct v4l2_input *i) +{ + static const char * const iname[] = { + [ CX88_VMUX_COMPOSITE1 ] = "Composite1", + [ CX88_VMUX_COMPOSITE2 ] = "Composite2", + [ CX88_VMUX_COMPOSITE3 ] = "Composite3", + [ CX88_VMUX_COMPOSITE4 ] = "Composite4", + [ CX88_VMUX_SVIDEO ] = "S-Video", + [ CX88_VMUX_TELEVISION ] = "Television", + [ CX88_VMUX_CABLE ] = "Cable TV", + [ CX88_VMUX_DVB ] = "DVB", + [ CX88_VMUX_DEBUG ] = "for debug only", + }; + unsigned int n = i->index; + + if (n >= 4) + return -EINVAL; + if (0 == INPUT(n).type) + return -EINVAL; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name,iname[INPUT(n).type]); + if ((CX88_VMUX_TELEVISION == INPUT(n).type) || + (CX88_VMUX_CABLE == INPUT(n).type)) { + i->type = V4L2_INPUT_TYPE_TUNER; + } + i->std = CX88_NORMS; + return 0; +} +EXPORT_SYMBOL(cx88_enum_input); + +static int vidioc_enum_input (struct file *file, void *priv, + struct v4l2_input *i) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + return cx88_enum_input (core,i); +} + +static int vidioc_g_input (struct file *file, void *priv, unsigned int *i) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + + *i = core->input; + return 0; +} + +static int vidioc_s_input (struct file *file, void *priv, unsigned int i) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + + if (i >= 4) + return -EINVAL; + if (0 == INPUT(i).type) + return -EINVAL; + + mutex_lock(&core->lock); + cx88_newstation(core); + cx88_video_mux(core,i); + mutex_unlock(&core->lock); + return 0; +} + +static int vidioc_g_tuner (struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + u32 reg; + + if (unlikely(UNSET == core->board.tuner_type)) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + strcpy(t->name, "Television"); + t->capability = V4L2_TUNER_CAP_NORM; + t->rangehigh = 0xffffffffUL; + call_all(core, tuner, g_tuner, t); + + cx88_get_stereo(core ,t); + reg = cx_read(MO_DEVICE_STATUS); + t->signal = (reg & (1<<5)) ? 0xffff : 0x0000; + return 0; +} + +static int vidioc_s_tuner (struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + + if (UNSET == core->board.tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + cx88_set_stereo(core, t->audmode, 1); + return 0; +} + +static int vidioc_g_frequency (struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx8800_fh *fh = priv; + struct cx88_core *core = fh->dev->core; + + if (unlikely(UNSET == core->board.tuner_type)) + return -EINVAL; + if (f->tuner) + return -EINVAL; + + f->frequency = core->freq; + + call_all(core, tuner, g_frequency, f); + + return 0; +} + +int cx88_set_freq (struct cx88_core *core, + const struct v4l2_frequency *f) +{ + struct v4l2_frequency new_freq = *f; + + if (unlikely(UNSET == core->board.tuner_type)) + return -EINVAL; + if (unlikely(f->tuner != 0)) + return -EINVAL; + + mutex_lock(&core->lock); + cx88_newstation(core); + call_all(core, tuner, s_frequency, f); + call_all(core, tuner, g_frequency, &new_freq); + core->freq = new_freq.frequency; + + /* When changing channels it is required to reset TVAUDIO */ + msleep (10); + cx88_set_tvaudio(core); + + mutex_unlock(&core->lock); + + return 0; +} +EXPORT_SYMBOL(cx88_set_freq); + +static int vidioc_s_frequency (struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct cx8800_fh *fh = priv; + struct cx88_core *core = fh->dev->core; + + return cx88_set_freq(core, f); +} + +static int vidioc_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + if (!v4l2_chip_match_host(&chip->match)) + return -EINVAL; + chip->revision = 0; + chip->ident = V4L2_IDENT_UNKNOWN; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register (struct file *file, void *fh, + struct v4l2_dbg_register *reg) +{ + struct cx88_core *core = ((struct cx8800_fh*)fh)->dev->core; + + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; + /* cx2388x has a 24-bit register space */ + reg->val = cx_read(reg->reg & 0xffffff); + reg->size = 4; + return 0; +} + +static int vidioc_s_register (struct file *file, void *fh, + const struct v4l2_dbg_register *reg) +{ + struct cx88_core *core = ((struct cx8800_fh*)fh)->dev->core; + + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; + cx_write(reg->reg & 0xffffff, reg->val); + return 0; +} +#endif + +/* ----------------------------------------------------------- */ +/* RADIO ESPECIFIC IOCTLS */ +/* ----------------------------------------------------------- */ + +static int radio_g_tuner (struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + + if (unlikely(t->index > 0)) + return -EINVAL; + + strcpy(t->name, "Radio"); + + call_all(core, tuner, g_tuner, t); + return 0; +} + +static int radio_s_tuner (struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + + if (0 != t->index) + return -EINVAL; + + call_all(core, tuner, s_tuner, t); + return 0; +} + +/* ----------------------------------------------------------- */ + +static void cx8800_vid_timeout(unsigned long data) +{ + struct cx8800_dev *dev = (struct cx8800_dev*)data; + struct cx88_core *core = dev->core; + struct cx88_dmaqueue *q = &dev->vidq; + struct cx88_buffer *buf; + unsigned long flags; + + cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH21]); + + cx_clear(MO_VID_DMACNTRL, 0x11); + cx_clear(VID_CAPTURE_CONTROL, 0x06); + + spin_lock_irqsave(&dev->slock,flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", core->name, + buf, buf->vb.i, (unsigned long)buf->risc.dma); + } + restart_video_queue(dev,q); + spin_unlock_irqrestore(&dev->slock,flags); +} + +static const char *cx88_vid_irqs[32] = { + "y_risci1", "u_risci1", "v_risci1", "vbi_risc1", + "y_risci2", "u_risci2", "v_risci2", "vbi_risc2", + "y_oflow", "u_oflow", "v_oflow", "vbi_oflow", + "y_sync", "u_sync", "v_sync", "vbi_sync", + "opc_err", "par_err", "rip_err", "pci_abort", +}; + +static void cx8800_vid_irq(struct cx8800_dev *dev) +{ + struct cx88_core *core = dev->core; + u32 status, mask, count; + + status = cx_read(MO_VID_INTSTAT); + mask = cx_read(MO_VID_INTMSK); + if (0 == (status & mask)) + return; + cx_write(MO_VID_INTSTAT, status); + if (irq_debug || (status & mask & ~0xff)) + cx88_print_irqbits(core->name, "irq vid", + cx88_vid_irqs, ARRAY_SIZE(cx88_vid_irqs), + status, mask); + + /* risc op code error */ + if (status & (1 << 16)) { + printk(KERN_WARNING "%s/0: video risc op code error\n",core->name); + cx_clear(MO_VID_DMACNTRL, 0x11); + cx_clear(VID_CAPTURE_CONTROL, 0x06); + cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH21]); + } + + /* risc1 y */ + if (status & 0x01) { + spin_lock(&dev->slock); + count = cx_read(MO_VIDY_GPCNT); + cx88_wakeup(core, &dev->vidq, count); + spin_unlock(&dev->slock); + } + + /* risc1 vbi */ + if (status & 0x08) { + spin_lock(&dev->slock); + count = cx_read(MO_VBI_GPCNT); + cx88_wakeup(core, &dev->vbiq, count); + spin_unlock(&dev->slock); + } + + /* risc2 y */ + if (status & 0x10) { + dprintk(2,"stopper video\n"); + spin_lock(&dev->slock); + restart_video_queue(dev,&dev->vidq); + spin_unlock(&dev->slock); + } + + /* risc2 vbi */ + if (status & 0x80) { + dprintk(2,"stopper vbi\n"); + spin_lock(&dev->slock); + cx8800_restart_vbi_queue(dev,&dev->vbiq); + spin_unlock(&dev->slock); + } +} + +static irqreturn_t cx8800_irq(int irq, void *dev_id) +{ + struct cx8800_dev *dev = dev_id; + struct cx88_core *core = dev->core; + u32 status; + int loop, handled = 0; + + for (loop = 0; loop < 10; loop++) { + status = cx_read(MO_PCI_INTSTAT) & + (core->pci_irqmask | PCI_INT_VIDINT); + if (0 == status) + goto out; + cx_write(MO_PCI_INTSTAT, status); + handled = 1; + + if (status & core->pci_irqmask) + cx88_core_irq(core,status); + if (status & PCI_INT_VIDINT) + cx8800_vid_irq(dev); + } + if (10 == loop) { + printk(KERN_WARNING "%s/0: irq loop -- clearing mask\n", + core->name); + cx_write(MO_PCI_INTMSK,0); + } + + out: + return IRQ_RETVAL(handled); +} + +/* ----------------------------------------------------------- */ +/* exported stuff */ + +static const struct v4l2_file_operations video_fops = +{ + .owner = THIS_MODULE, + .open = video_open, + .release = video_release, + .read = video_read, + .poll = video_poll, + .mmap = video_mmap, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops video_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_g_chip_ident = vidioc_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif +}; + +static const struct video_device cx8800_video_template = { + .name = "cx8800-video", + .fops = &video_fops, + .ioctl_ops = &video_ioctl_ops, + .tvnorms = CX88_NORMS, +}; + +static const struct v4l2_ioctl_ops vbi_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_fmt_vbi_cap = cx8800_vbi_fmt, + .vidioc_try_fmt_vbi_cap = cx8800_vbi_fmt, + .vidioc_s_fmt_vbi_cap = cx8800_vbi_fmt, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_g_chip_ident = vidioc_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif +}; + +static const struct video_device cx8800_vbi_template = { + .name = "cx8800-vbi", + .fops = &video_fops, + .ioctl_ops = &vbi_ioctl_ops, + .tvnorms = CX88_NORMS, +}; + +static const struct v4l2_file_operations radio_fops = +{ + .owner = THIS_MODULE, + .open = video_open, + .poll = v4l2_ctrl_poll, + .release = video_release, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops radio_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_tuner = radio_g_tuner, + .vidioc_s_tuner = radio_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_g_chip_ident = vidioc_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif +}; + +static const struct video_device cx8800_radio_template = { + .name = "cx8800-radio", + .fops = &radio_fops, + .ioctl_ops = &radio_ioctl_ops, +}; + +static const struct v4l2_ctrl_ops cx8800_ctrl_vid_ops = { + .s_ctrl = cx8800_s_vid_ctrl, +}; + +static const struct v4l2_ctrl_ops cx8800_ctrl_aud_ops = { + .s_ctrl = cx8800_s_aud_ctrl, +}; + +/* ----------------------------------------------------------- */ + +static void cx8800_unregister_video(struct cx8800_dev *dev) +{ + if (dev->radio_dev) { + if (video_is_registered(dev->radio_dev)) + video_unregister_device(dev->radio_dev); + else + video_device_release(dev->radio_dev); + dev->radio_dev = NULL; + } + if (dev->vbi_dev) { + if (video_is_registered(dev->vbi_dev)) + video_unregister_device(dev->vbi_dev); + else + video_device_release(dev->vbi_dev); + dev->vbi_dev = NULL; + } + if (dev->video_dev) { + if (video_is_registered(dev->video_dev)) + video_unregister_device(dev->video_dev); + else + video_device_release(dev->video_dev); + dev->video_dev = NULL; + } +} + +static int cx8800_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct cx8800_dev *dev; + struct cx88_core *core; + int err; + int i; + + dev = kzalloc(sizeof(*dev),GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + goto fail_free; + } + core = cx88_core_get(dev->pci); + if (NULL == core) { + err = -EINVAL; + goto fail_free; + } + dev->core = core; + + /* print pci info */ + dev->pci_rev = pci_dev->revision; + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", core->name, + pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0)); + + pci_set_master(pci_dev); + if (!pci_dma_supported(pci_dev,DMA_BIT_MASK(32))) { + printk("%s/0: Oops: no 32bit PCI DMA ???\n",core->name); + err = -EIO; + goto fail_core; + } + + /* initialize driver struct */ + spin_lock_init(&dev->slock); + core->tvnorm = V4L2_STD_NTSC_M; + + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + dev->vidq.timeout.function = cx8800_vid_timeout; + dev->vidq.timeout.data = (unsigned long)dev; + init_timer(&dev->vidq.timeout); + cx88_risc_stopper(dev->pci,&dev->vidq.stopper, + MO_VID_DMACNTRL,0x11,0x00); + + /* init vbi dma queues */ + INIT_LIST_HEAD(&dev->vbiq.active); + INIT_LIST_HEAD(&dev->vbiq.queued); + dev->vbiq.timeout.function = cx8800_vbi_timeout; + dev->vbiq.timeout.data = (unsigned long)dev; + init_timer(&dev->vbiq.timeout); + cx88_risc_stopper(dev->pci,&dev->vbiq.stopper, + MO_VID_DMACNTRL,0x88,0x00); + + /* get irq */ + err = request_irq(pci_dev->irq, cx8800_irq, + IRQF_SHARED | IRQF_DISABLED, core->name, dev); + if (err < 0) { + printk(KERN_ERR "%s/0: can't get IRQ %d\n", + core->name,pci_dev->irq); + goto fail_core; + } + cx_set(MO_PCI_INTMSK, core->pci_irqmask); + + for (i = 0; i < CX8800_AUD_CTLS; i++) { + const struct cx88_ctrl *cc = &cx8800_aud_ctls[i]; + struct v4l2_ctrl *vc; + + vc = v4l2_ctrl_new_std(&core->audio_hdl, &cx8800_ctrl_aud_ops, + cc->id, cc->minimum, cc->maximum, cc->step, cc->default_value); + if (vc == NULL) { + err = core->audio_hdl.error; + goto fail_core; + } + vc->priv = (void *)cc; + } + + for (i = 0; i < CX8800_VID_CTLS; i++) { + const struct cx88_ctrl *cc = &cx8800_vid_ctls[i]; + struct v4l2_ctrl *vc; + + vc = v4l2_ctrl_new_std(&core->video_hdl, &cx8800_ctrl_vid_ops, + cc->id, cc->minimum, cc->maximum, cc->step, cc->default_value); + if (vc == NULL) { + err = core->video_hdl.error; + goto fail_core; + } + vc->priv = (void *)cc; + if (vc->id == V4L2_CID_CHROMA_AGC) + core->chroma_agc = vc; + } + v4l2_ctrl_add_handler(&core->video_hdl, &core->audio_hdl, NULL); + + /* load and configure helper modules */ + + if (core->board.audio_chip == V4L2_IDENT_WM8775) { + struct i2c_board_info wm8775_info = { + .type = "wm8775", + .addr = 0x36 >> 1, + .platform_data = &core->wm8775_data, + }; + struct v4l2_subdev *sd; + + if (core->boardnr == CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1) + core->wm8775_data.is_nova_s = true; + else + core->wm8775_data.is_nova_s = false; + + sd = v4l2_i2c_new_subdev_board(&core->v4l2_dev, &core->i2c_adap, + &wm8775_info, NULL); + if (sd != NULL) { + core->sd_wm8775 = sd; + sd->grp_id = WM8775_GID; + } + } + + if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) { + /* This probes for a tda9874 as is used on some + Pixelview Ultra boards. */ + v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, + "tvaudio", 0, I2C_ADDRS(0xb0 >> 1)); + } + + switch (core->boardnr) { + case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: { + static const struct i2c_board_info rtc_info = { + I2C_BOARD_INFO("isl1208", 0x6f) + }; + + request_module("rtc-isl1208"); + core->i2c_rtc = i2c_new_device(&core->i2c_adap, &rtc_info); + } + /* break intentionally omitted */ + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + request_module("ir-kbd-i2c"); + } + + /* Sets device info at pci_dev */ + pci_set_drvdata(pci_dev, dev); + + dev->width = 320; + dev->height = 240; + dev->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); + + /* initial device configuration */ + mutex_lock(&core->lock); + cx88_set_tvnorm(core, core->tvnorm); + v4l2_ctrl_handler_setup(&core->video_hdl); + v4l2_ctrl_handler_setup(&core->audio_hdl); + cx88_video_mux(core, 0); + + /* register v4l devices */ + dev->video_dev = cx88_vdev_init(core,dev->pci, + &cx8800_video_template,"video"); + video_set_drvdata(dev->video_dev, dev); + dev->video_dev->ctrl_handler = &core->video_hdl; + err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER, + video_nr[core->nr]); + if (err < 0) { + printk(KERN_ERR "%s/0: can't register video device\n", + core->name); + goto fail_unreg; + } + printk(KERN_INFO "%s/0: registered device %s [v4l2]\n", + core->name, video_device_node_name(dev->video_dev)); + + dev->vbi_dev = cx88_vdev_init(core,dev->pci,&cx8800_vbi_template,"vbi"); + video_set_drvdata(dev->vbi_dev, dev); + err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI, + vbi_nr[core->nr]); + if (err < 0) { + printk(KERN_ERR "%s/0: can't register vbi device\n", + core->name); + goto fail_unreg; + } + printk(KERN_INFO "%s/0: registered device %s\n", + core->name, video_device_node_name(dev->vbi_dev)); + + if (core->board.radio.type == CX88_RADIO) { + dev->radio_dev = cx88_vdev_init(core,dev->pci, + &cx8800_radio_template,"radio"); + video_set_drvdata(dev->radio_dev, dev); + dev->radio_dev->ctrl_handler = &core->audio_hdl; + err = video_register_device(dev->radio_dev,VFL_TYPE_RADIO, + radio_nr[core->nr]); + if (err < 0) { + printk(KERN_ERR "%s/0: can't register radio device\n", + core->name); + goto fail_unreg; + } + printk(KERN_INFO "%s/0: registered device %s\n", + core->name, video_device_node_name(dev->radio_dev)); + } + + /* start tvaudio thread */ + if (core->board.tuner_type != TUNER_ABSENT) { + core->kthread = kthread_run(cx88_audio_thread, core, "cx88 tvaudio"); + if (IS_ERR(core->kthread)) { + err = PTR_ERR(core->kthread); + printk(KERN_ERR "%s/0: failed to create cx88 audio thread, err=%d\n", + core->name, err); + } + } + mutex_unlock(&core->lock); + + return 0; + +fail_unreg: + cx8800_unregister_video(dev); + free_irq(pci_dev->irq, dev); + mutex_unlock(&core->lock); +fail_core: + cx88_core_put(core,dev->pci); +fail_free: + kfree(dev); + return err; +} + +static void cx8800_finidev(struct pci_dev *pci_dev) +{ + struct cx8800_dev *dev = pci_get_drvdata(pci_dev); + struct cx88_core *core = dev->core; + + /* stop thread */ + if (core->kthread) { + kthread_stop(core->kthread); + core->kthread = NULL; + } + + if (core->ir) + cx88_ir_stop(core); + + cx88_shutdown(core); /* FIXME */ + pci_disable_device(pci_dev); + + /* unregister stuff */ + + free_irq(pci_dev->irq, dev); + cx8800_unregister_video(dev); + pci_set_drvdata(pci_dev, NULL); + + /* free memory */ + btcx_riscmem_free(dev->pci,&dev->vidq.stopper); + cx88_core_put(core,dev->pci); + kfree(dev); +} + +#ifdef CONFIG_PM +static int cx8800_suspend(struct pci_dev *pci_dev, pm_message_t state) +{ + struct cx8800_dev *dev = pci_get_drvdata(pci_dev); + struct cx88_core *core = dev->core; + unsigned long flags; + + /* stop video+vbi capture */ + spin_lock_irqsave(&dev->slock, flags); + if (!list_empty(&dev->vidq.active)) { + printk("%s/0: suspend video\n", core->name); + stop_video_dma(dev); + del_timer(&dev->vidq.timeout); + } + if (!list_empty(&dev->vbiq.active)) { + printk("%s/0: suspend vbi\n", core->name); + cx8800_stop_vbi_dma(dev); + del_timer(&dev->vbiq.timeout); + } + spin_unlock_irqrestore(&dev->slock, flags); + + if (core->ir) + cx88_ir_stop(core); + /* FIXME -- shutdown device */ + cx88_shutdown(core); + + pci_save_state(pci_dev); + if (0 != pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state))) { + pci_disable_device(pci_dev); + dev->state.disabled = 1; + } + return 0; +} + +static int cx8800_resume(struct pci_dev *pci_dev) +{ + struct cx8800_dev *dev = pci_get_drvdata(pci_dev); + struct cx88_core *core = dev->core; + unsigned long flags; + int err; + + if (dev->state.disabled) { + err=pci_enable_device(pci_dev); + if (err) { + printk(KERN_ERR "%s/0: can't enable device\n", + core->name); + return err; + } + + dev->state.disabled = 0; + } + err= pci_set_power_state(pci_dev, PCI_D0); + if (err) { + printk(KERN_ERR "%s/0: can't set power state\n", core->name); + pci_disable_device(pci_dev); + dev->state.disabled = 1; + + return err; + } + pci_restore_state(pci_dev); + + /* FIXME: re-initialize hardware */ + cx88_reset(core); + if (core->ir) + cx88_ir_start(core); + + cx_set(MO_PCI_INTMSK, core->pci_irqmask); + + /* restart video+vbi capture */ + spin_lock_irqsave(&dev->slock, flags); + if (!list_empty(&dev->vidq.active)) { + printk("%s/0: resume video\n", core->name); + restart_video_queue(dev,&dev->vidq); + } + if (!list_empty(&dev->vbiq.active)) { + printk("%s/0: resume vbi\n", core->name); + cx8800_restart_vbi_queue(dev,&dev->vbiq); + } + spin_unlock_irqrestore(&dev->slock, flags); + + return 0; +} +#endif + +/* ----------------------------------------------------------- */ + +static const struct pci_device_id cx8800_pci_tbl[] = { + { + .vendor = 0x14f1, + .device = 0x8800, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + },{ + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, cx8800_pci_tbl); + +static struct pci_driver cx8800_pci_driver = { + .name = "cx8800", + .id_table = cx8800_pci_tbl, + .probe = cx8800_initdev, + .remove = cx8800_finidev, +#ifdef CONFIG_PM + .suspend = cx8800_suspend, + .resume = cx8800_resume, +#endif +}; + +static int __init cx8800_init(void) +{ + printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %s loaded\n", + CX88_VERSION); + return pci_register_driver(&cx8800_pci_driver); +} + +static void __exit cx8800_fini(void) +{ + pci_unregister_driver(&cx8800_pci_driver); +} + +module_init(cx8800_init); +module_exit(cx8800_fini); diff --git a/drivers/media/pci/cx88/cx88-vp3054-i2c.c b/drivers/media/pci/cx88/cx88-vp3054-i2c.c new file mode 100644 index 00000000..deede6e2 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-vp3054-i2c.c @@ -0,0 +1,158 @@ +/* + + cx88-vp3054-i2c.c -- support for the secondary I2C bus of the + DNTV Live! DVB-T Pro (VP-3054), wired as: + GPIO[0] -> SCL, GPIO[1] -> SDA + + (c) 2005 Chris Pascoe + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include + +#include + +#include "cx88.h" +#include "cx88-vp3054-i2c.h" + +MODULE_DESCRIPTION("driver for cx2388x VP3054 design"); +MODULE_AUTHOR("Chris Pascoe "); +MODULE_LICENSE("GPL"); + +/* ----------------------------------------------------------------------- */ + +static void vp3054_bit_setscl(void *data, int state) +{ + struct cx8802_dev *dev = data; + struct cx88_core *core = dev->core; + struct vp3054_i2c_state *vp3054_i2c = dev->vp3054; + + if (state) { + vp3054_i2c->state |= 0x0001; /* SCL high */ + vp3054_i2c->state &= ~0x0100; /* external pullup */ + } else { + vp3054_i2c->state &= ~0x0001; /* SCL low */ + vp3054_i2c->state |= 0x0100; /* drive pin */ + } + cx_write(MO_GP0_IO, 0x010000 | vp3054_i2c->state); + cx_read(MO_GP0_IO); +} + +static void vp3054_bit_setsda(void *data, int state) +{ + struct cx8802_dev *dev = data; + struct cx88_core *core = dev->core; + struct vp3054_i2c_state *vp3054_i2c = dev->vp3054; + + if (state) { + vp3054_i2c->state |= 0x0002; /* SDA high */ + vp3054_i2c->state &= ~0x0200; /* tristate pin */ + } else { + vp3054_i2c->state &= ~0x0002; /* SDA low */ + vp3054_i2c->state |= 0x0200; /* drive pin */ + } + cx_write(MO_GP0_IO, 0x020000 | vp3054_i2c->state); + cx_read(MO_GP0_IO); +} + +static int vp3054_bit_getscl(void *data) +{ + struct cx8802_dev *dev = data; + struct cx88_core *core = dev->core; + u32 state; + + state = cx_read(MO_GP0_IO); + return (state & 0x01) ? 1 : 0; +} + +static int vp3054_bit_getsda(void *data) +{ + struct cx8802_dev *dev = data; + struct cx88_core *core = dev->core; + u32 state; + + state = cx_read(MO_GP0_IO); + return (state & 0x02) ? 1 : 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_algo_bit_data vp3054_i2c_algo_template = { + .setsda = vp3054_bit_setsda, + .setscl = vp3054_bit_setscl, + .getsda = vp3054_bit_getsda, + .getscl = vp3054_bit_getscl, + .udelay = 16, + .timeout = 200, +}; + +/* ----------------------------------------------------------------------- */ + +int vp3054_i2c_probe(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct vp3054_i2c_state *vp3054_i2c; + int rc; + + if (core->boardnr != CX88_BOARD_DNTV_LIVE_DVB_T_PRO) + return 0; + + vp3054_i2c = kzalloc(sizeof(*vp3054_i2c), GFP_KERNEL); + if (vp3054_i2c == NULL) + return -ENOMEM; + dev->vp3054 = vp3054_i2c; + + vp3054_i2c->algo = vp3054_i2c_algo_template; + + vp3054_i2c->adap.dev.parent = &dev->pci->dev; + strlcpy(vp3054_i2c->adap.name, core->name, + sizeof(vp3054_i2c->adap.name)); + vp3054_i2c->adap.owner = THIS_MODULE; + vp3054_i2c->algo.data = dev; + i2c_set_adapdata(&vp3054_i2c->adap, dev); + vp3054_i2c->adap.algo_data = &vp3054_i2c->algo; + + vp3054_bit_setscl(dev,1); + vp3054_bit_setsda(dev,1); + + rc = i2c_bit_add_bus(&vp3054_i2c->adap); + if (0 != rc) { + printk("%s: vp3054_i2c register FAILED\n", core->name); + + kfree(dev->vp3054); + dev->vp3054 = NULL; + } + + return rc; +} + +void vp3054_i2c_remove(struct cx8802_dev *dev) +{ + struct vp3054_i2c_state *vp3054_i2c = dev->vp3054; + + if (vp3054_i2c == NULL || + dev->core->boardnr != CX88_BOARD_DNTV_LIVE_DVB_T_PRO) + return; + + i2c_del_adapter(&vp3054_i2c->adap); + kfree(vp3054_i2c); +} + +EXPORT_SYMBOL(vp3054_i2c_probe); +EXPORT_SYMBOL(vp3054_i2c_remove); diff --git a/drivers/media/pci/cx88/cx88-vp3054-i2c.h b/drivers/media/pci/cx88/cx88-vp3054-i2c.h new file mode 100644 index 00000000..95d0c60a --- /dev/null +++ b/drivers/media/pci/cx88/cx88-vp3054-i2c.h @@ -0,0 +1,41 @@ +/* + + cx88-vp3054-i2c.h -- support for the secondary I2C bus of the + DNTV Live! DVB-T Pro (VP-3054), wired as: + GPIO[0] -> SCL, GPIO[1] -> SDA + + (c) 2005 Chris Pascoe + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +/* ----------------------------------------------------------------------- */ +struct vp3054_i2c_state { + struct i2c_adapter adap; + struct i2c_algo_bit_data algo; + u32 state; +}; + +/* ----------------------------------------------------------------------- */ +#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054) +int vp3054_i2c_probe(struct cx8802_dev *dev); +void vp3054_i2c_remove(struct cx8802_dev *dev); +#else +static inline int vp3054_i2c_probe(struct cx8802_dev *dev) +{ return 0; } +static inline void vp3054_i2c_remove(struct cx8802_dev *dev) +{ } +#endif diff --git a/drivers/media/pci/cx88/cx88.h b/drivers/media/pci/cx88/cx88.h new file mode 100644 index 00000000..51ce2c0e --- /dev/null +++ b/drivers/media/pci/cx88/cx88.h @@ -0,0 +1,749 @@ +/* + * + * v4l2 device driver for cx2388x based TV cards + * + * (c) 2003,04 Gerd Knorr [SUSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "btcx-risc.h" +#include "cx88-reg.h" +#include "tuner-xc2028.h" + +#include + +#define CX88_VERSION "0.0.9" + +#define UNSET (-1U) + +#define CX88_MAXBOARDS 8 + +/* Max number of inputs by card */ +#define MAX_CX88_INPUT 8 + +/* ----------------------------------------------------------- */ +/* defines and enums */ + +/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM/LC */ +#define CX88_NORMS (V4L2_STD_ALL \ + & ~V4L2_STD_PAL_H \ + & ~V4L2_STD_NTSC_M_KR \ + & ~V4L2_STD_SECAM_LC) + +#define FORMAT_FLAGS_PACKED 0x01 +#define FORMAT_FLAGS_PLANAR 0x02 + +#define VBI_LINE_COUNT 17 +#define VBI_LINE_LENGTH 2048 + +#define AUD_RDS_LINES 4 + +/* need "shadow" registers for some write-only ones ... */ +#define SHADOW_AUD_VOL_CTL 1 +#define SHADOW_AUD_BAL_CTL 2 +#define SHADOW_MAX 3 + +/* FM Radio deemphasis type */ +enum cx88_deemph_type { + FM_NO_DEEMPH = 0, + FM_DEEMPH_50, + FM_DEEMPH_75 +}; + +enum cx88_board_type { + CX88_BOARD_NONE = 0, + CX88_MPEG_DVB, + CX88_MPEG_BLACKBIRD +}; + +enum cx8802_board_access { + CX8802_DRVCTL_SHARED = 1, + CX8802_DRVCTL_EXCLUSIVE = 2, +}; + +/* ----------------------------------------------------------- */ +/* tv norms */ + +static inline unsigned int norm_maxw(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 720 : 768; +} + + +static inline unsigned int norm_maxh(v4l2_std_id norm) +{ + return (norm & V4L2_STD_625_50) ? 576 : 480; +} + +/* ----------------------------------------------------------- */ +/* static data */ + +struct cx8800_fmt { + const char *name; + u32 fourcc; /* v4l2 format id */ + int depth; + int flags; + u32 cxformat; +}; + +/* ----------------------------------------------------------- */ +/* SRAM memory management data (see cx88-core.c) */ + +#define SRAM_CH21 0 /* video */ +#define SRAM_CH22 1 +#define SRAM_CH23 2 +#define SRAM_CH24 3 /* vbi */ +#define SRAM_CH25 4 /* audio */ +#define SRAM_CH26 5 +#define SRAM_CH28 6 /* mpeg */ +#define SRAM_CH27 7 /* audio rds */ +/* more */ + +struct sram_channel { + const char *name; + u32 cmds_start; + u32 ctrl_start; + u32 cdt; + u32 fifo_start; + u32 fifo_size; + u32 ptr1_reg; + u32 ptr2_reg; + u32 cnt1_reg; + u32 cnt2_reg; +}; +extern const struct sram_channel cx88_sram_channels[]; + +/* ----------------------------------------------------------- */ +/* card configuration */ + +#define CX88_BOARD_NOAUTO UNSET +#define CX88_BOARD_UNKNOWN 0 +#define CX88_BOARD_HAUPPAUGE 1 +#define CX88_BOARD_GDI 2 +#define CX88_BOARD_PIXELVIEW 3 +#define CX88_BOARD_ATI_WONDER_PRO 4 +#define CX88_BOARD_WINFAST2000XP_EXPERT 5 +#define CX88_BOARD_AVERTV_STUDIO_303 6 +#define CX88_BOARD_MSI_TVANYWHERE_MASTER 7 +#define CX88_BOARD_WINFAST_DV2000 8 +#define CX88_BOARD_LEADTEK_PVR2000 9 +#define CX88_BOARD_IODATA_GVVCP3PCI 10 +#define CX88_BOARD_PROLINK_PLAYTVPVR 11 +#define CX88_BOARD_ASUS_PVR_416 12 +#define CX88_BOARD_MSI_TVANYWHERE 13 +#define CX88_BOARD_KWORLD_DVB_T 14 +#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1 15 +#define CX88_BOARD_KWORLD_LTV883 16 +#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q 17 +#define CX88_BOARD_HAUPPAUGE_DVB_T1 18 +#define CX88_BOARD_CONEXANT_DVB_T1 19 +#define CX88_BOARD_PROVIDEO_PV259 20 +#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS 21 +#define CX88_BOARD_PCHDTV_HD3000 22 +#define CX88_BOARD_DNTV_LIVE_DVB_T 23 +#define CX88_BOARD_HAUPPAUGE_ROSLYN 24 +#define CX88_BOARD_DIGITALLOGIC_MEC 25 +#define CX88_BOARD_IODATA_GVBCTV7E 26 +#define CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO 27 +#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T 28 +#define CX88_BOARD_ADSTECH_DVB_T_PCI 29 +#define CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1 30 +#define CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD 31 +#define CX88_BOARD_AVERMEDIA_ULTRATV_MC_550 32 +#define CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD 33 +#define CX88_BOARD_ATI_HDTVWONDER 34 +#define CX88_BOARD_WINFAST_DTV1000 35 +#define CX88_BOARD_AVERTV_303 36 +#define CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1 37 +#define CX88_BOARD_HAUPPAUGE_NOVASE2_S1 38 +#define CX88_BOARD_KWORLD_DVBS_100 39 +#define CX88_BOARD_HAUPPAUGE_HVR1100 40 +#define CX88_BOARD_HAUPPAUGE_HVR1100LP 41 +#define CX88_BOARD_DNTV_LIVE_DVB_T_PRO 42 +#define CX88_BOARD_KWORLD_DVB_T_CX22702 43 +#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL 44 +#define CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT 45 +#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID 46 +#define CX88_BOARD_PCHDTV_HD5500 47 +#define CX88_BOARD_KWORLD_MCE200_DELUXE 48 +#define CX88_BOARD_PIXELVIEW_PLAYTV_P7000 49 +#define CX88_BOARD_NPGTECH_REALTV_TOP10FM 50 +#define CX88_BOARD_WINFAST_DTV2000H 51 +#define CX88_BOARD_GENIATECH_DVBS 52 +#define CX88_BOARD_HAUPPAUGE_HVR3000 53 +#define CX88_BOARD_NORWOOD_MICRO 54 +#define CX88_BOARD_TE_DTV_250_OEM_SWANN 55 +#define CX88_BOARD_HAUPPAUGE_HVR1300 56 +#define CX88_BOARD_ADSTECH_PTV_390 57 +#define CX88_BOARD_PINNACLE_PCTV_HD_800i 58 +#define CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO 59 +#define CX88_BOARD_PINNACLE_HYBRID_PCTV 60 +#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL 61 +#define CX88_BOARD_POWERCOLOR_REAL_ANGEL 62 +#define CX88_BOARD_GENIATECH_X8000_MT 63 +#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO 64 +#define CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD 65 +#define CX88_BOARD_PROLINK_PV_8000GT 66 +#define CX88_BOARD_KWORLD_ATSC_120 67 +#define CX88_BOARD_HAUPPAUGE_HVR4000 68 +#define CX88_BOARD_HAUPPAUGE_HVR4000LITE 69 +#define CX88_BOARD_TEVII_S460 70 +#define CX88_BOARD_OMICOM_SS4_PCI 71 +#define CX88_BOARD_TBS_8920 72 +#define CX88_BOARD_TEVII_S420 73 +#define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74 +#define CX88_BOARD_PROF_7300 75 +#define CX88_BOARD_SATTRADE_ST4200 76 +#define CX88_BOARD_TBS_8910 77 +#define CX88_BOARD_PROF_6200 78 +#define CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII 79 +#define CX88_BOARD_HAUPPAUGE_IRONLY 80 +#define CX88_BOARD_WINFAST_DTV1800H 81 +#define CX88_BOARD_WINFAST_DTV2000H_J 82 +#define CX88_BOARD_PROF_7301 83 +#define CX88_BOARD_SAMSUNG_SMT_7020 84 +#define CX88_BOARD_TWINHAN_VP1027_DVBS 85 +#define CX88_BOARD_TEVII_S464 86 +#define CX88_BOARD_WINFAST_DTV2000H_PLUS 87 +#define CX88_BOARD_WINFAST_DTV1800H_XC4000 88 +#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36 89 +#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43 90 + +enum cx88_itype { + CX88_VMUX_COMPOSITE1 = 1, + CX88_VMUX_COMPOSITE2, + CX88_VMUX_COMPOSITE3, + CX88_VMUX_COMPOSITE4, + CX88_VMUX_SVIDEO, + CX88_VMUX_TELEVISION, + CX88_VMUX_CABLE, + CX88_VMUX_DVB, + CX88_VMUX_DEBUG, + CX88_RADIO, +}; + +struct cx88_input { + enum cx88_itype type; + u32 gpio0, gpio1, gpio2, gpio3; + unsigned int vmux:2; + unsigned int audioroute:4; +}; + +struct cx88_board { + const char *name; + unsigned int tuner_type; + unsigned int radio_type; + unsigned char tuner_addr; + unsigned char radio_addr; + int tda9887_conf; + struct cx88_input input[MAX_CX88_INPUT]; + struct cx88_input radio; + enum cx88_board_type mpeg; + unsigned int audio_chip; + int num_frontends; + + /* Used for I2S devices */ + int i2sinputcntl; +}; + +struct cx88_subid { + u16 subvendor; + u16 subdevice; + u32 card; +}; + +enum cx88_tvaudio { + WW_NONE = 1, + WW_BTSC, + WW_BG, + WW_DK, + WW_I, + WW_L, + WW_EIAJ, + WW_I2SPT, + WW_FM, + WW_I2SADC, + WW_M +}; + +#define INPUT(nr) (core->board.input[nr]) + +/* ----------------------------------------------------------- */ +/* device / file handle status */ + +#define RESOURCE_OVERLAY 1 +#define RESOURCE_VIDEO 2 +#define RESOURCE_VBI 4 + +#define BUFFER_TIMEOUT msecs_to_jiffies(2000) + +/* buffer for one video frame */ +struct cx88_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + /* cx88 specific */ + unsigned int bpl; + struct btcx_riscmem risc; + const struct cx8800_fmt *fmt; + u32 count; +}; + +struct cx88_dmaqueue { + struct list_head active; + struct list_head queued; + struct timer_list timeout; + struct btcx_riscmem stopper; + u32 count; +}; + +struct cx88_core { + struct list_head devlist; + atomic_t refcount; + + /* board name */ + int nr; + char name[32]; + u32 model; + + /* pci stuff */ + int pci_bus; + int pci_slot; + u32 __iomem *lmmio; + u8 __iomem *bmmio; + u32 shadow[SHADOW_MAX]; + int pci_irqmask; + + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_algo_bit_data i2c_algo; + struct i2c_client i2c_client; + u32 i2c_state, i2c_rc; + + /* config info -- analog */ + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler video_hdl; + struct v4l2_ctrl *chroma_agc; + struct v4l2_ctrl_handler audio_hdl; + struct v4l2_subdev *sd_wm8775; + struct i2c_client *i2c_rtc; + unsigned int boardnr; + struct cx88_board board; + + /* Supported V4L _STD_ tuner formats */ + unsigned int tuner_formats; + + /* config info -- dvb */ +#if IS_ENABLED(CONFIG_VIDEO_CX88_DVB) + int (*prev_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); +#endif + void (*gate_ctrl)(struct cx88_core *core, int open); + + /* state info */ + struct task_struct *kthread; + v4l2_std_id tvnorm; + enum cx88_tvaudio tvaudio; + u32 audiomode_manual; + u32 audiomode_current; + u32 input; + u32 last_analog_input; + u32 astat; + u32 use_nicam; + unsigned long last_change; + + /* IR remote control state */ + struct cx88_IR *ir; + + /* I2C remote data */ + struct IR_i2c_init_data init_data; + struct wm8775_platform_data wm8775_data; + + struct mutex lock; + /* various v4l controls */ + u32 freq; + int users; + int mpeg_users; + + /* cx88-video needs to access cx8802 for hybrid tuner pll access. */ + struct cx8802_dev *dvbdev; + enum cx88_board_type active_type_id; + int active_ref; + int active_fe_id; +}; + +static inline struct cx88_core *to_core(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct cx88_core, v4l2_dev); +} + +#define call_hw(core, grpid, o, f, args...) \ + do { \ + if (!core->i2c_rc) { \ + if (core->gate_ctrl) \ + core->gate_ctrl(core, 1); \ + v4l2_device_call_all(&core->v4l2_dev, grpid, o, f, ##args); \ + if (core->gate_ctrl) \ + core->gate_ctrl(core, 0); \ + } \ + } while (0) + +#define call_all(core, o, f, args...) call_hw(core, 0, o, f, ##args) + +#define WM8775_GID (1 << 0) + +#define wm8775_s_ctrl(core, id, val) \ + do { \ + struct v4l2_ctrl *ctrl_ = \ + v4l2_ctrl_find(core->sd_wm8775->ctrl_handler, id); \ + if (ctrl_ && !core->i2c_rc) { \ + if (core->gate_ctrl) \ + core->gate_ctrl(core, 1); \ + v4l2_ctrl_s_ctrl(ctrl_, val); \ + if (core->gate_ctrl) \ + core->gate_ctrl(core, 0); \ + } \ + } while (0) + +#define wm8775_g_ctrl(core, id) \ + ({ \ + struct v4l2_ctrl *ctrl_ = \ + v4l2_ctrl_find(core->sd_wm8775->ctrl_handler, id); \ + s32 val = 0; \ + if (ctrl_ && !core->i2c_rc) { \ + if (core->gate_ctrl) \ + core->gate_ctrl(core, 1); \ + val = v4l2_ctrl_g_ctrl(ctrl_); \ + if (core->gate_ctrl) \ + core->gate_ctrl(core, 0); \ + } \ + val; \ + }) + +struct cx8800_dev; +struct cx8802_dev; + +/* ----------------------------------------------------------- */ +/* function 0: video stuff */ + +struct cx8800_fh { + struct v4l2_fh fh; + struct cx8800_dev *dev; + unsigned int resources; + + /* video capture */ + struct videobuf_queue vidq; + + /* vbi capture */ + struct videobuf_queue vbiq; +}; + +struct cx8800_suspend_state { + int disabled; +}; + +struct cx8800_dev { + struct cx88_core *core; + spinlock_t slock; + + /* various device info */ + unsigned int resources; + struct video_device *video_dev; + struct video_device *vbi_dev; + struct video_device *radio_dev; + + /* pci i/o */ + struct pci_dev *pci; + unsigned char pci_rev,pci_lat; + + const struct cx8800_fmt *fmt; + unsigned int width, height; + + /* capture queues */ + struct cx88_dmaqueue vidq; + struct cx88_dmaqueue vbiq; + + /* various v4l controls */ + + /* other global state info */ + struct cx8800_suspend_state state; +}; + +/* ----------------------------------------------------------- */ +/* function 1: audio/alsa stuff */ +/* =============> moved to cx88-alsa.c <====================== */ + + +/* ----------------------------------------------------------- */ +/* function 2: mpeg stuff */ + +struct cx8802_fh { + struct v4l2_fh fh; + struct cx8802_dev *dev; + struct videobuf_queue mpegq; +}; + +struct cx8802_suspend_state { + int disabled; +}; + +struct cx8802_driver { + struct cx88_core *core; + + /* List of drivers attached to device */ + struct list_head drvlist; + + /* Type of driver and access required */ + enum cx88_board_type type_id; + enum cx8802_board_access hw_access; + + /* MPEG 8802 internal only */ + int (*suspend)(struct pci_dev *pci_dev, pm_message_t state); + int (*resume)(struct pci_dev *pci_dev); + + /* Callers to the following functions must hold core->lock */ + + /* MPEG 8802 -> mini driver - Driver probe and configuration */ + int (*probe)(struct cx8802_driver *drv); + int (*remove)(struct cx8802_driver *drv); + + /* MPEG 8802 -> mini driver - Access for hardware control */ + int (*advise_acquire)(struct cx8802_driver *drv); + int (*advise_release)(struct cx8802_driver *drv); + + /* MPEG 8802 <- mini driver - Access for hardware control */ + int (*request_acquire)(struct cx8802_driver *drv); + int (*request_release)(struct cx8802_driver *drv); +}; + +struct cx8802_dev { + struct cx88_core *core; + spinlock_t slock; + + /* pci i/o */ + struct pci_dev *pci; + unsigned char pci_rev,pci_lat; + + /* dma queues */ + struct cx88_dmaqueue mpegq; + u32 ts_packet_size; + u32 ts_packet_count; + + /* other global state info */ + struct cx8802_suspend_state state; + + /* for blackbird only */ + struct list_head devlist; +#if IS_ENABLED(CONFIG_VIDEO_CX88_BLACKBIRD) + struct video_device *mpeg_dev; + u32 mailbox; + int width; + int height; + unsigned char mpeg_active; /* nonzero if mpeg encoder is active */ + + /* mpeg params */ + struct cx2341x_handler cxhdl; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_CX88_DVB) + /* for dvb only */ + struct videobuf_dvb_frontends frontends; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054) + /* For VP3045 secondary I2C bus support */ + struct vp3054_i2c_state *vp3054; +#endif + /* for switching modulation types */ + unsigned char ts_gen_cntrl; + + /* List of attached drivers; must hold core->lock to access */ + struct list_head drvlist; + + struct work_struct request_module_wk; +}; + +/* ----------------------------------------------------------- */ + +#define cx_read(reg) readl(core->lmmio + ((reg)>>2)) +#define cx_write(reg,value) writel((value), core->lmmio + ((reg)>>2)) +#define cx_writeb(reg,value) writeb((value), core->bmmio + (reg)) + +#define cx_andor(reg,mask,value) \ + writel((readl(core->lmmio+((reg)>>2)) & ~(mask)) |\ + ((value) & (mask)), core->lmmio+((reg)>>2)) +#define cx_set(reg,bit) cx_andor((reg),(bit),(bit)) +#define cx_clear(reg,bit) cx_andor((reg),(bit),0) + +#define cx_wait(d) { if (need_resched()) schedule(); else udelay(d); } + +/* shadow registers */ +#define cx_sread(sreg) (core->shadow[sreg]) +#define cx_swrite(sreg,reg,value) \ + (core->shadow[sreg] = value, \ + writel(core->shadow[sreg], core->lmmio + ((reg)>>2))) +#define cx_sandor(sreg,reg,mask,value) \ + (core->shadow[sreg] = (core->shadow[sreg] & ~(mask)) | ((value) & (mask)), \ + writel(core->shadow[sreg], core->lmmio + ((reg)>>2))) + +/* ----------------------------------------------------------- */ +/* cx88-core.c */ + +extern unsigned int cx88_core_debug; + +extern void cx88_print_irqbits(const char *name, const char *tag, const char *strings[], + int len, u32 bits, u32 mask); + +extern int cx88_core_irq(struct cx88_core *core, u32 status); +extern void cx88_wakeup(struct cx88_core *core, + struct cx88_dmaqueue *q, u32 count); +extern void cx88_shutdown(struct cx88_core *core); +extern int cx88_reset(struct cx88_core *core); + +extern int +cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int top_offset, unsigned int bottom_offset, + unsigned int bpl, unsigned int padding, unsigned int lines); +extern int +cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, unsigned int bpl, + unsigned int lines, unsigned int lpi); +extern int +cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value); +extern void +cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf); + +extern void cx88_risc_disasm(struct cx88_core *core, + struct btcx_riscmem *risc); +extern int cx88_sram_channel_setup(struct cx88_core *core, + const struct sram_channel *ch, + unsigned int bpl, u32 risc); +extern void cx88_sram_channel_dump(struct cx88_core *core, + const struct sram_channel *ch); + +extern int cx88_set_scale(struct cx88_core *core, unsigned int width, + unsigned int height, enum v4l2_field field); +extern int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm); + +extern struct video_device *cx88_vdev_init(struct cx88_core *core, + struct pci_dev *pci, + const struct video_device *template_, + const char *type); +extern struct cx88_core* cx88_core_get(struct pci_dev *pci); +extern void cx88_core_put(struct cx88_core *core, + struct pci_dev *pci); + +extern int cx88_start_audio_dma(struct cx88_core *core); +extern int cx88_stop_audio_dma(struct cx88_core *core); + + +/* ----------------------------------------------------------- */ +/* cx88-vbi.c */ + +/* Can be used as g_vbi_fmt, try_vbi_fmt and s_vbi_fmt */ +int cx8800_vbi_fmt (struct file *file, void *priv, + struct v4l2_format *f); + +/* +int cx8800_start_vbi_dma(struct cx8800_dev *dev, + struct cx88_dmaqueue *q, + struct cx88_buffer *buf); +*/ +int cx8800_stop_vbi_dma(struct cx8800_dev *dev); +int cx8800_restart_vbi_queue(struct cx8800_dev *dev, + struct cx88_dmaqueue *q); +void cx8800_vbi_timeout(unsigned long data); + +extern const struct videobuf_queue_ops cx8800_vbi_qops; + +/* ----------------------------------------------------------- */ +/* cx88-i2c.c */ + +extern int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci); + + +/* ----------------------------------------------------------- */ +/* cx88-cards.c */ + +extern int cx88_tuner_callback(void *dev, int component, int command, int arg); +extern int cx88_get_resources(const struct cx88_core *core, + struct pci_dev *pci); +extern struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr); +extern void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl); + +/* ----------------------------------------------------------- */ +/* cx88-tvaudio.c */ + +void cx88_set_tvaudio(struct cx88_core *core); +void cx88_newstation(struct cx88_core *core); +void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t); +void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual); +int cx88_audio_thread(void *data); + +int cx8802_register_driver(struct cx8802_driver *drv); +int cx8802_unregister_driver(struct cx8802_driver *drv); + +/* Caller must hold core->lock */ +struct cx8802_driver * cx8802_get_driver(struct cx8802_dev *dev, enum cx88_board_type btype); + +/* ----------------------------------------------------------- */ +/* cx88-dsp.c */ + +s32 cx88_dsp_detect_stereo_sap(struct cx88_core *core); + +/* ----------------------------------------------------------- */ +/* cx88-input.c */ + +int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci); +int cx88_ir_fini(struct cx88_core *core); +void cx88_ir_irq(struct cx88_core *core); +int cx88_ir_start(struct cx88_core *core); +void cx88_ir_stop(struct cx88_core *core); +extern void cx88_i2c_init_ir(struct cx88_core *core); + +/* ----------------------------------------------------------- */ +/* cx88-mpeg.c */ + +int cx8802_buf_prepare(struct videobuf_queue *q,struct cx8802_dev *dev, + struct cx88_buffer *buf, enum v4l2_field field); +void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf); +void cx8802_cancel_buffers(struct cx8802_dev *dev); + +/* ----------------------------------------------------------- */ +/* cx88-video.c*/ +int cx88_enum_input (struct cx88_core *core,struct v4l2_input *i); +int cx88_set_freq(struct cx88_core *core, const struct v4l2_frequency *f); +int cx88_video_mux(struct cx88_core *core, unsigned int input); +void cx88_querycap(struct file *file, struct cx88_core *core, + struct v4l2_capability *cap); diff --git a/drivers/media/pci/ddbridge/Kconfig b/drivers/media/pci/ddbridge/Kconfig new file mode 100644 index 00000000..44e5dc15 --- /dev/null +++ b/drivers/media/pci/ddbridge/Kconfig @@ -0,0 +1,18 @@ +config DVB_DDBRIDGE + tristate "Digital Devices bridge support" + depends on DVB_CORE && PCI && I2C + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT + ---help--- + Support for cards with the Digital Devices PCI express bridge: + - Octopus PCIe Bridge + - Octopus mini PCIe Bridge + - Octopus LE + - DuoFlex S2 Octopus + - DuoFlex CT Octopus + - cineS2(v6) + + Say Y if you own such a card and want to use it. diff --git a/drivers/media/pci/ddbridge/Makefile b/drivers/media/pci/ddbridge/Makefile new file mode 100644 index 00000000..7446c8b6 --- /dev/null +++ b/drivers/media/pci/ddbridge/Makefile @@ -0,0 +1,14 @@ +# +# Makefile for the ddbridge device driver +# + +ddbridge-objs := ddbridge-core.o + +obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o + +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners/ + +# For the staging CI driver cxd2099 +ccflags-y += -Idrivers/staging/media/cxd2099/ diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c new file mode 100644 index 00000000..36e34522 --- /dev/null +++ b/drivers/media/pci/ddbridge/ddbridge-core.c @@ -0,0 +1,1729 @@ +/* + * ddbridge.c: Digital Devices PCIe bridge driver + * + * Copyright (C) 2010-2011 Digital Devices GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ddbridge.h" + +#include "ddbridge-regs.h" + +#include "tda18271c2dd.h" +#include "stv6110x.h" +#include "stv090x.h" +#include "lnbh24.h" +#include "drxk.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* MSI had problems with lost interrupts, fixed but needs testing */ +#undef CONFIG_PCI_MSI + +/******************************************************************************/ + +static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val) +{ + struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1 } }; + return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1; +} + +static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr, u8 reg, u8 *val) +{ + struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, + .buf = ®, .len = 1 }, + {.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1 } }; + return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; +} + +static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr, + u16 reg, u8 *val) +{ + u8 msg[2] = {reg>>8, reg&0xff}; + struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, + .buf = msg, .len = 2}, + {.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1} }; + return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; +} + +static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd) +{ + struct ddb *dev = i2c->dev; + int stat; + u32 val; + + i2c->done = 0; + ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND); + stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ); + if (stat <= 0) { + printk(KERN_ERR "I2C timeout\n"); + { /* MSI debugging*/ + u32 istat = ddbreadl(INTERRUPT_STATUS); + printk(KERN_ERR "IRS %08x\n", istat); + ddbwritel(istat, INTERRUPT_ACK); + } + return -EIO; + } + val = ddbreadl(i2c->regs+I2C_COMMAND); + if (val & 0x70000) + return -EIO; + return 0; +} + +static int ddb_i2c_master_xfer(struct i2c_adapter *adapter, + struct i2c_msg msg[], int num) +{ + struct ddb_i2c *i2c = (struct ddb_i2c *)i2c_get_adapdata(adapter); + struct ddb *dev = i2c->dev; + u8 addr = 0; + + if (num) + addr = msg[0].addr; + + if (num == 2 && msg[1].flags & I2C_M_RD && + !(msg[0].flags & I2C_M_RD)) { + memcpy_toio(dev->regs + I2C_TASKMEM_BASE + i2c->wbuf, + msg[0].buf, msg[0].len); + ddbwritel(msg[0].len|(msg[1].len << 16), + i2c->regs+I2C_TASKLENGTH); + if (!ddb_i2c_cmd(i2c, addr, 1)) { + memcpy_fromio(msg[1].buf, + dev->regs + I2C_TASKMEM_BASE + i2c->rbuf, + msg[1].len); + return num; + } + } + + if (num == 1 && !(msg[0].flags & I2C_M_RD)) { + ddbcpyto(I2C_TASKMEM_BASE + i2c->wbuf, msg[0].buf, msg[0].len); + ddbwritel(msg[0].len, i2c->regs + I2C_TASKLENGTH); + if (!ddb_i2c_cmd(i2c, addr, 2)) + return num; + } + if (num == 1 && (msg[0].flags & I2C_M_RD)) { + ddbwritel(msg[0].len << 16, i2c->regs + I2C_TASKLENGTH); + if (!ddb_i2c_cmd(i2c, addr, 3)) { + ddbcpyfrom(msg[0].buf, + I2C_TASKMEM_BASE + i2c->rbuf, msg[0].len); + return num; + } + } + return -EIO; +} + + +static u32 ddb_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +struct i2c_algorithm ddb_i2c_algo = { + .master_xfer = ddb_i2c_master_xfer, + .functionality = ddb_i2c_functionality, +}; + +static void ddb_i2c_release(struct ddb *dev) +{ + int i; + struct ddb_i2c *i2c; + struct i2c_adapter *adap; + + for (i = 0; i < dev->info->port_num; i++) { + i2c = &dev->i2c[i]; + adap = &i2c->adap; + i2c_del_adapter(adap); + } +} + +static int ddb_i2c_init(struct ddb *dev) +{ + int i, j, stat = 0; + struct ddb_i2c *i2c; + struct i2c_adapter *adap; + + for (i = 0; i < dev->info->port_num; i++) { + i2c = &dev->i2c[i]; + i2c->dev = dev; + i2c->nr = i; + i2c->wbuf = i * (I2C_TASKMEM_SIZE / 4); + i2c->rbuf = i2c->wbuf + (I2C_TASKMEM_SIZE / 8); + i2c->regs = 0x80 + i * 0x20; + ddbwritel(I2C_SPEED_100, i2c->regs + I2C_TIMING); + ddbwritel((i2c->rbuf << 16) | i2c->wbuf, + i2c->regs + I2C_TASKADDRESS); + init_waitqueue_head(&i2c->wq); + + adap = &i2c->adap; + i2c_set_adapdata(adap, i2c); +#ifdef I2C_ADAP_CLASS_TV_DIGITAL + adap->class = I2C_ADAP_CLASS_TV_DIGITAL|I2C_CLASS_TV_ANALOG; +#else +#ifdef I2C_CLASS_TV_ANALOG + adap->class = I2C_CLASS_TV_ANALOG; +#endif +#endif + strcpy(adap->name, "ddbridge"); + adap->algo = &ddb_i2c_algo; + adap->algo_data = (void *)i2c; + adap->dev.parent = &dev->pdev->dev; + stat = i2c_add_adapter(adap); + if (stat) + break; + } + if (stat) + for (j = 0; j < i; j++) { + i2c = &dev->i2c[j]; + adap = &i2c->adap; + i2c_del_adapter(adap); + } + return stat; +} + + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +#if 0 +static void set_table(struct ddb *dev, u32 off, + dma_addr_t *pbuf, u32 num) +{ + u32 i, base; + u64 mem; + + base = DMA_BASE_ADDRESS_TABLE + off; + for (i = 0; i < num; i++) { + mem = pbuf[i]; + ddbwritel(mem & 0xffffffff, base + i * 8); + ddbwritel(mem >> 32, base + i * 8 + 4); + } +} +#endif + +static void ddb_address_table(struct ddb *dev) +{ + u32 i, j, base; + u64 mem; + dma_addr_t *pbuf; + + for (i = 0; i < dev->info->port_num * 2; i++) { + base = DMA_BASE_ADDRESS_TABLE + i * 0x100; + pbuf = dev->input[i].pbuf; + for (j = 0; j < dev->input[i].dma_buf_num; j++) { + mem = pbuf[j]; + ddbwritel(mem & 0xffffffff, base + j * 8); + ddbwritel(mem >> 32, base + j * 8 + 4); + } + } + for (i = 0; i < dev->info->port_num; i++) { + base = DMA_BASE_ADDRESS_TABLE + 0x800 + i * 0x100; + pbuf = dev->output[i].pbuf; + for (j = 0; j < dev->output[i].dma_buf_num; j++) { + mem = pbuf[j]; + ddbwritel(mem & 0xffffffff, base + j * 8); + ddbwritel(mem >> 32, base + j * 8 + 4); + } + } +} + +static void io_free(struct pci_dev *pdev, u8 **vbuf, + dma_addr_t *pbuf, u32 size, int num) +{ + int i; + + for (i = 0; i < num; i++) { + if (vbuf[i]) { + pci_free_consistent(pdev, size, vbuf[i], pbuf[i]); + vbuf[i] = 0; + } + } +} + +static int io_alloc(struct pci_dev *pdev, u8 **vbuf, + dma_addr_t *pbuf, u32 size, int num) +{ + int i; + + for (i = 0; i < num; i++) { + vbuf[i] = pci_alloc_consistent(pdev, size, &pbuf[i]); + if (!vbuf[i]) + return -ENOMEM; + } + return 0; +} + +static int ddb_buffers_alloc(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + switch (port->class) { + case DDB_PORT_TUNER: + if (io_alloc(dev->pdev, port->input[0]->vbuf, + port->input[0]->pbuf, + port->input[0]->dma_buf_size, + port->input[0]->dma_buf_num) < 0) + return -1; + if (io_alloc(dev->pdev, port->input[1]->vbuf, + port->input[1]->pbuf, + port->input[1]->dma_buf_size, + port->input[1]->dma_buf_num) < 0) + return -1; + break; + case DDB_PORT_CI: + if (io_alloc(dev->pdev, port->input[0]->vbuf, + port->input[0]->pbuf, + port->input[0]->dma_buf_size, + port->input[0]->dma_buf_num) < 0) + return -1; + if (io_alloc(dev->pdev, port->output->vbuf, + port->output->pbuf, + port->output->dma_buf_size, + port->output->dma_buf_num) < 0) + return -1; + break; + default: + break; + } + } + ddb_address_table(dev); + return 0; +} + +static void ddb_buffers_free(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + io_free(dev->pdev, port->input[0]->vbuf, + port->input[0]->pbuf, + port->input[0]->dma_buf_size, + port->input[0]->dma_buf_num); + io_free(dev->pdev, port->input[1]->vbuf, + port->input[1]->pbuf, + port->input[1]->dma_buf_size, + port->input[1]->dma_buf_num); + io_free(dev->pdev, port->output->vbuf, + port->output->pbuf, + port->output->dma_buf_size, + port->output->dma_buf_num); + } +} + +static void ddb_input_start(struct ddb_input *input) +{ + struct ddb *dev = input->port->dev; + + spin_lock_irq(&input->lock); + input->cbuf = 0; + input->coff = 0; + + /* reset */ + ddbwritel(0, TS_INPUT_CONTROL(input->nr)); + ddbwritel(2, TS_INPUT_CONTROL(input->nr)); + ddbwritel(0, TS_INPUT_CONTROL(input->nr)); + + ddbwritel((1 << 16) | + (input->dma_buf_num << 11) | + (input->dma_buf_size >> 7), + DMA_BUFFER_SIZE(input->nr)); + ddbwritel(0, DMA_BUFFER_ACK(input->nr)); + + ddbwritel(1, DMA_BASE_WRITE); + ddbwritel(3, DMA_BUFFER_CONTROL(input->nr)); + ddbwritel(9, TS_INPUT_CONTROL(input->nr)); + input->running = 1; + spin_unlock_irq(&input->lock); +} + +static void ddb_input_stop(struct ddb_input *input) +{ + struct ddb *dev = input->port->dev; + + spin_lock_irq(&input->lock); + ddbwritel(0, TS_INPUT_CONTROL(input->nr)); + ddbwritel(0, DMA_BUFFER_CONTROL(input->nr)); + input->running = 0; + spin_unlock_irq(&input->lock); +} + +static void ddb_output_start(struct ddb_output *output) +{ + struct ddb *dev = output->port->dev; + + spin_lock_irq(&output->lock); + output->cbuf = 0; + output->coff = 0; + ddbwritel(0, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel(2, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel(0, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel(0x3c, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel((1 << 16) | + (output->dma_buf_num << 11) | + (output->dma_buf_size >> 7), + DMA_BUFFER_SIZE(output->nr + 8)); + ddbwritel(0, DMA_BUFFER_ACK(output->nr + 8)); + + ddbwritel(1, DMA_BASE_READ); + ddbwritel(3, DMA_BUFFER_CONTROL(output->nr + 8)); + /* ddbwritel(0xbd, TS_OUTPUT_CONTROL(output->nr)); */ + ddbwritel(0x1d, TS_OUTPUT_CONTROL(output->nr)); + output->running = 1; + spin_unlock_irq(&output->lock); +} + +static void ddb_output_stop(struct ddb_output *output) +{ + struct ddb *dev = output->port->dev; + + spin_lock_irq(&output->lock); + ddbwritel(0, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel(0, DMA_BUFFER_CONTROL(output->nr + 8)); + output->running = 0; + spin_unlock_irq(&output->lock); +} + +static u32 ddb_output_free(struct ddb_output *output) +{ + u32 idx, off, stat = output->stat; + s32 diff; + + idx = (stat >> 11) & 0x1f; + off = (stat & 0x7ff) << 7; + + if (output->cbuf != idx) { + if ((((output->cbuf + 1) % output->dma_buf_num) == idx) && + (output->dma_buf_size - output->coff <= 188)) + return 0; + return 188; + } + diff = off - output->coff; + if (diff <= 0 || diff > 188) + return 188; + return 0; +} + +static ssize_t ddb_output_write(struct ddb_output *output, + const u8 *buf, size_t count) +{ + struct ddb *dev = output->port->dev; + u32 idx, off, stat = output->stat; + u32 left = count, len; + + idx = (stat >> 11) & 0x1f; + off = (stat & 0x7ff) << 7; + + while (left) { + len = output->dma_buf_size - output->coff; + if ((((output->cbuf + 1) % output->dma_buf_num) == idx) && + (off == 0)) { + if (len <= 188) + break; + len -= 188; + } + if (output->cbuf == idx) { + if (off > output->coff) { +#if 1 + len = off - output->coff; + len -= (len % 188); + if (len <= 188) + +#endif + break; + len -= 188; + } + } + if (len > left) + len = left; + if (copy_from_user(output->vbuf[output->cbuf] + output->coff, + buf, len)) + return -EIO; + left -= len; + buf += len; + output->coff += len; + if (output->coff == output->dma_buf_size) { + output->coff = 0; + output->cbuf = ((output->cbuf + 1) % output->dma_buf_num); + } + ddbwritel((output->cbuf << 11) | (output->coff >> 7), + DMA_BUFFER_ACK(output->nr + 8)); + } + return count - left; +} + +static u32 ddb_input_avail(struct ddb_input *input) +{ + struct ddb *dev = input->port->dev; + u32 idx, off, stat = input->stat; + u32 ctrl = ddbreadl(DMA_BUFFER_CONTROL(input->nr)); + + idx = (stat >> 11) & 0x1f; + off = (stat & 0x7ff) << 7; + + if (ctrl & 4) { + printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl); + ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr)); + return 0; + } + if (input->cbuf != idx) + return 188; + return 0; +} + +static ssize_t ddb_input_read(struct ddb_input *input, u8 *buf, size_t count) +{ + struct ddb *dev = input->port->dev; + u32 left = count; + u32 idx, free, stat = input->stat; + int ret; + + idx = (stat >> 11) & 0x1f; + + while (left) { + if (input->cbuf == idx) + return count - left; + free = input->dma_buf_size - input->coff; + if (free > left) + free = left; + ret = copy_to_user(buf, input->vbuf[input->cbuf] + + input->coff, free); + if (ret) + return -EFAULT; + input->coff += free; + if (input->coff == input->dma_buf_size) { + input->coff = 0; + input->cbuf = (input->cbuf+1) % input->dma_buf_num; + } + left -= free; + ddbwritel((input->cbuf << 11) | (input->coff >> 7), + DMA_BUFFER_ACK(input->nr)); + } + return count; +} + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +#if 0 +static struct ddb_input *fe2input(struct ddb *dev, struct dvb_frontend *fe) +{ + int i; + + for (i = 0; i < dev->info->port_num * 2; i++) { + if (dev->input[i].fe == fe) + return &dev->input[i]; + } + return NULL; +} +#endif + +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct ddb_input *input = fe->sec_priv; + struct ddb_port *port = input->port; + int status; + + if (enable) { + mutex_lock(&port->i2c_gate_lock); + status = input->gate_ctrl(fe, 1); + } else { + status = input->gate_ctrl(fe, 0); + mutex_unlock(&port->i2c_gate_lock); + } + return status; +} + +static int demod_attach_drxk(struct ddb_input *input) +{ + struct i2c_adapter *i2c = &input->port->i2c->adap; + struct dvb_frontend *fe; + struct drxk_config config; + + memset(&config, 0, sizeof(config)); + config.microcode_name = "drxk_a3.mc"; + config.qam_demod_parameter_count = 4; + config.adr = 0x29 + (input->nr & 1); + + fe = input->fe = dvb_attach(drxk_attach, &config, i2c); + if (!input->fe) { + printk(KERN_ERR "No DRXK found!\n"); + return -ENODEV; + } + fe->sec_priv = input; + input->gate_ctrl = fe->ops.i2c_gate_ctrl; + fe->ops.i2c_gate_ctrl = drxk_gate_ctrl; + return 0; +} + +static int tuner_attach_tda18271(struct ddb_input *input) +{ + struct i2c_adapter *i2c = &input->port->i2c->adap; + struct dvb_frontend *fe; + + if (input->fe->ops.i2c_gate_ctrl) + input->fe->ops.i2c_gate_ctrl(input->fe, 1); + fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60); + if (!fe) { + printk(KERN_ERR "No TDA18271 found!\n"); + return -ENODEV; + } + if (input->fe->ops.i2c_gate_ctrl) + input->fe->ops.i2c_gate_ctrl(input->fe, 0); + return 0; +} + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +static struct stv090x_config stv0900 = { + .device = STV0900, + .demod_mode = STV090x_DUAL, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 27000000, + .address = 0x69, + + .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + + .repeater_level = STV090x_RPTLEVEL_16, + + .adc1_range = STV090x_ADC_1Vpp, + .adc2_range = STV090x_ADC_1Vpp, + + .diseqc_envelope_mode = true, +}; + +static struct stv090x_config stv0900_aa = { + .device = STV0900, + .demod_mode = STV090x_DUAL, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 27000000, + .address = 0x68, + + .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + + .repeater_level = STV090x_RPTLEVEL_16, + + .adc1_range = STV090x_ADC_1Vpp, + .adc2_range = STV090x_ADC_1Vpp, + + .diseqc_envelope_mode = true, +}; + +static struct stv6110x_config stv6110a = { + .addr = 0x60, + .refclk = 27000000, + .clk_div = 1, +}; + +static struct stv6110x_config stv6110b = { + .addr = 0x63, + .refclk = 27000000, + .clk_div = 1, +}; + +static int demod_attach_stv0900(struct ddb_input *input, int type) +{ + struct i2c_adapter *i2c = &input->port->i2c->adap; + struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; + + input->fe = dvb_attach(stv090x_attach, feconf, i2c, + (input->nr & 1) ? STV090x_DEMODULATOR_1 + : STV090x_DEMODULATOR_0); + if (!input->fe) { + printk(KERN_ERR "No STV0900 found!\n"); + return -ENODEV; + } + if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0, + 0, (input->nr & 1) ? + (0x09 - type) : (0x0b - type))) { + printk(KERN_ERR "No LNBH24 found!\n"); + return -ENODEV; + } + return 0; +} + +static int tuner_attach_stv6110(struct ddb_input *input, int type) +{ + struct i2c_adapter *i2c = &input->port->i2c->adap; + struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; + struct stv6110x_config *tunerconf = (input->nr & 1) ? + &stv6110b : &stv6110a; + struct stv6110x_devctl *ctl; + + ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c); + if (!ctl) { + printk(KERN_ERR "No STV6110X found!\n"); + return -ENODEV; + } + printk(KERN_INFO "attach tuner input %d adr %02x\n", + input->nr, tunerconf->addr); + + feconf->tuner_init = ctl->tuner_init; + feconf->tuner_sleep = ctl->tuner_sleep; + feconf->tuner_set_mode = ctl->tuner_set_mode; + feconf->tuner_set_frequency = ctl->tuner_set_frequency; + feconf->tuner_get_frequency = ctl->tuner_get_frequency; + feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth; + feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth; + feconf->tuner_set_bbgain = ctl->tuner_set_bbgain; + feconf->tuner_get_bbgain = ctl->tuner_get_bbgain; + feconf->tuner_set_refclk = ctl->tuner_set_refclk; + feconf->tuner_get_status = ctl->tuner_get_status; + + return 0; +} + +static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id, + int (*start_feed)(struct dvb_demux_feed *), + int (*stop_feed)(struct dvb_demux_feed *), + void *priv) +{ + dvbdemux->priv = priv; + + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = start_feed; + dvbdemux->stop_feed = stop_feed; + dvbdemux->write_to_decoder = NULL; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING); + return dvb_dmx_init(dvbdemux); +} + +static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev, + struct dvb_demux *dvbdemux, + struct dmx_frontend *hw_frontend, + struct dmx_frontend *mem_frontend, + struct dvb_adapter *dvb_adapter) +{ + int ret; + + dmxdev->filternum = 256; + dmxdev->demux = &dvbdemux->dmx; + dmxdev->capabilities = 0; + ret = dvb_dmxdev_init(dmxdev, dvb_adapter); + if (ret < 0) + return ret; + + hw_frontend->source = DMX_FRONTEND_0; + dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend); + mem_frontend->source = DMX_MEMORY_FE; + dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend); + return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend); +} + +static int start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct ddb_input *input = dvbdmx->priv; + + if (!input->users) + ddb_input_start(input); + + return ++input->users; +} + +static int stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct ddb_input *input = dvbdmx->priv; + + if (--input->users) + return input->users; + + ddb_input_stop(input); + return 0; +} + + +static void dvb_input_detach(struct ddb_input *input) +{ + struct dvb_adapter *adap = &input->adap; + struct dvb_demux *dvbdemux = &input->demux; + + switch (input->attached) { + case 5: + if (input->fe2) + dvb_unregister_frontend(input->fe2); + if (input->fe) { + dvb_unregister_frontend(input->fe); + dvb_frontend_detach(input->fe); + input->fe = NULL; + } + case 4: + dvb_net_release(&input->dvbnet); + + case 3: + dvbdemux->dmx.close(&dvbdemux->dmx); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, + &input->hw_frontend); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, + &input->mem_frontend); + dvb_dmxdev_release(&input->dmxdev); + + case 2: + dvb_dmx_release(&input->demux); + + case 1: + dvb_unregister_adapter(adap); + } + input->attached = 0; +} + +static int dvb_input_attach(struct ddb_input *input) +{ + int ret; + struct ddb_port *port = input->port; + struct dvb_adapter *adap = &input->adap; + struct dvb_demux *dvbdemux = &input->demux; + + ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE, + &input->port->dev->pdev->dev, + adapter_nr); + if (ret < 0) { + printk(KERN_ERR "ddbridge: Could not register adapter." + "Check if you enabled enough adapters in dvb-core!\n"); + return ret; + } + input->attached = 1; + + ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux", + start_feed, + stop_feed, input); + if (ret < 0) + return ret; + input->attached = 2; + + ret = my_dvb_dmxdev_ts_card_init(&input->dmxdev, &input->demux, + &input->hw_frontend, + &input->mem_frontend, adap); + if (ret < 0) + return ret; + input->attached = 3; + + ret = dvb_net_init(adap, &input->dvbnet, input->dmxdev.demux); + if (ret < 0) + return ret; + input->attached = 4; + + input->fe = 0; + switch (port->type) { + case DDB_TUNER_DVBS_ST: + if (demod_attach_stv0900(input, 0) < 0) + return -ENODEV; + if (tuner_attach_stv6110(input, 0) < 0) + return -ENODEV; + if (input->fe) { + if (dvb_register_frontend(adap, input->fe) < 0) + return -ENODEV; + } + break; + case DDB_TUNER_DVBS_ST_AA: + if (demod_attach_stv0900(input, 1) < 0) + return -ENODEV; + if (tuner_attach_stv6110(input, 1) < 0) + return -ENODEV; + if (input->fe) { + if (dvb_register_frontend(adap, input->fe) < 0) + return -ENODEV; + } + break; + case DDB_TUNER_DVBCT_TR: + if (demod_attach_drxk(input) < 0) + return -ENODEV; + if (tuner_attach_tda18271(input) < 0) + return -ENODEV; + if (input->fe) { + if (dvb_register_frontend(adap, input->fe) < 0) + return -ENODEV; + } + if (input->fe2) { + if (dvb_register_frontend(adap, input->fe2) < 0) + return -ENODEV; + input->fe2->tuner_priv = input->fe->tuner_priv; + memcpy(&input->fe2->ops.tuner_ops, + &input->fe->ops.tuner_ops, + sizeof(struct dvb_tuner_ops)); + } + break; + } + input->attached = 5; + return 0; +} + +/****************************************************************************/ +/****************************************************************************/ + +static ssize_t ts_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct ddb_output *output = dvbdev->priv; + size_t left = count; + int stat; + + while (left) { + if (ddb_output_free(output) < 188) { + if (file->f_flags & O_NONBLOCK) + break; + if (wait_event_interruptible( + output->wq, ddb_output_free(output) >= 188) < 0) + break; + } + stat = ddb_output_write(output, buf, left); + if (stat < 0) + break; + buf += stat; + left -= stat; + } + return (left == count) ? -EAGAIN : (count - left); +} + +static ssize_t ts_read(struct file *file, char *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct ddb_output *output = dvbdev->priv; + struct ddb_input *input = output->port->input[0]; + int left, read; + + count -= count % 188; + left = count; + while (left) { + if (ddb_input_avail(input) < 188) { + if (file->f_flags & O_NONBLOCK) + break; + if (wait_event_interruptible( + input->wq, ddb_input_avail(input) >= 188) < 0) + break; + } + read = ddb_input_read(input, buf, left); + if (read < 0) + return read; + left -= read; + buf += read; + } + return (left == count) ? -EAGAIN : (count - left); +} + +static unsigned int ts_poll(struct file *file, poll_table *wait) +{ + /* + struct dvb_device *dvbdev = file->private_data; + struct ddb_output *output = dvbdev->priv; + struct ddb_input *input = output->port->input[0]; + */ + unsigned int mask = 0; + +#if 0 + if (data_avail_to_read) + mask |= POLLIN | POLLRDNORM; + if (data_avail_to_write) + mask |= POLLOUT | POLLWRNORM; + + poll_wait(file, &read_queue, wait); + poll_wait(file, &write_queue, wait); +#endif + return mask; +} + +static const struct file_operations ci_fops = { + .owner = THIS_MODULE, + .read = ts_read, + .write = ts_write, + .open = dvb_generic_open, + .release = dvb_generic_release, + .poll = ts_poll, + .mmap = 0, +}; + +static struct dvb_device dvbdev_ci = { + .priv = 0, + .readers = -1, + .writers = -1, + .users = -1, + .fops = &ci_fops, +}; + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static void input_tasklet(unsigned long data) +{ + struct ddb_input *input = (struct ddb_input *) data; + struct ddb *dev = input->port->dev; + + spin_lock(&input->lock); + if (!input->running) { + spin_unlock(&input->lock); + return; + } + input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr)); + + if (input->port->class == DDB_PORT_TUNER) { + if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr))) + printk(KERN_ERR "Overflow input %d\n", input->nr); + while (input->cbuf != ((input->stat >> 11) & 0x1f) + || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) { + dvb_dmx_swfilter_packets(&input->demux, + input->vbuf[input->cbuf], + input->dma_buf_size / 188); + + input->cbuf = (input->cbuf + 1) % input->dma_buf_num; + ddbwritel((input->cbuf << 11), + DMA_BUFFER_ACK(input->nr)); + input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr)); + } + } + if (input->port->class == DDB_PORT_CI) + wake_up(&input->wq); + spin_unlock(&input->lock); +} + +static void output_tasklet(unsigned long data) +{ + struct ddb_output *output = (struct ddb_output *) data; + struct ddb *dev = output->port->dev; + + spin_lock(&output->lock); + if (!output->running) { + spin_unlock(&output->lock); + return; + } + output->stat = ddbreadl(DMA_BUFFER_CURRENT(output->nr + 8)); + wake_up(&output->wq); + spin_unlock(&output->lock); +} + + +struct cxd2099_cfg cxd_cfg = { + .bitrate = 62000, + .adr = 0x40, + .polarity = 1, + .clock_mode = 1, +}; + +static int ddb_ci_attach(struct ddb_port *port) +{ + int ret; + + ret = dvb_register_adapter(&port->output->adap, + "DDBridge", + THIS_MODULE, + &port->dev->pdev->dev, + adapter_nr); + if (ret < 0) + return ret; + port->en = cxd2099_attach(&cxd_cfg, port, &port->i2c->adap); + if (!port->en) { + dvb_unregister_adapter(&port->output->adap); + return -ENODEV; + } + ddb_input_start(port->input[0]); + ddb_output_start(port->output); + dvb_ca_en50221_init(&port->output->adap, + port->en, 0, 1); + ret = dvb_register_device(&port->output->adap, &port->output->dev, + &dvbdev_ci, (void *) port->output, + DVB_DEVICE_SEC); + return ret; +} + +static int ddb_port_attach(struct ddb_port *port) +{ + int ret = 0; + + switch (port->class) { + case DDB_PORT_TUNER: + ret = dvb_input_attach(port->input[0]); + if (ret < 0) + break; + ret = dvb_input_attach(port->input[1]); + break; + case DDB_PORT_CI: + ret = ddb_ci_attach(port); + break; + default: + break; + } + if (ret < 0) + printk(KERN_ERR "port_attach on port %d failed\n", port->nr); + return ret; +} + +static int ddb_ports_attach(struct ddb *dev) +{ + int i, ret = 0; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + ret = ddb_port_attach(port); + if (ret < 0) + break; + } + return ret; +} + +static void ddb_ports_detach(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + switch (port->class) { + case DDB_PORT_TUNER: + dvb_input_detach(port->input[0]); + dvb_input_detach(port->input[1]); + break; + case DDB_PORT_CI: + if (port->output->dev) + dvb_unregister_device(port->output->dev); + if (port->en) { + ddb_input_stop(port->input[0]); + ddb_output_stop(port->output); + dvb_ca_en50221_release(port->en); + kfree(port->en); + port->en = 0; + dvb_unregister_adapter(&port->output->adap); + } + break; + } + } +} + +/****************************************************************************/ +/****************************************************************************/ + +static int port_has_ci(struct ddb_port *port) +{ + u8 val; + return i2c_read_reg(&port->i2c->adap, 0x40, 0, &val) ? 0 : 1; +} + +static int port_has_stv0900(struct ddb_port *port) +{ + u8 val; + if (i2c_read_reg16(&port->i2c->adap, 0x69, 0xf100, &val) < 0) + return 0; + return 1; +} + +static int port_has_stv0900_aa(struct ddb_port *port) +{ + u8 val; + if (i2c_read_reg16(&port->i2c->adap, 0x68, 0xf100, &val) < 0) + return 0; + return 1; +} + +static int port_has_drxks(struct ddb_port *port) +{ + u8 val; + if (i2c_read(&port->i2c->adap, 0x29, &val) < 0) + return 0; + if (i2c_read(&port->i2c->adap, 0x2a, &val) < 0) + return 0; + return 1; +} + +static void ddb_port_probe(struct ddb_port *port) +{ + struct ddb *dev = port->dev; + char *modname = "NO MODULE"; + + port->class = DDB_PORT_NONE; + + if (port_has_ci(port)) { + modname = "CI"; + port->class = DDB_PORT_CI; + ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING); + } else if (port_has_stv0900(port)) { + modname = "DUAL DVB-S2"; + port->class = DDB_PORT_TUNER; + port->type = DDB_TUNER_DVBS_ST; + ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING); + } else if (port_has_stv0900_aa(port)) { + modname = "DUAL DVB-S2"; + port->class = DDB_PORT_TUNER; + port->type = DDB_TUNER_DVBS_ST_AA; + ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING); + } else if (port_has_drxks(port)) { + modname = "DUAL DVB-C/T"; + port->class = DDB_PORT_TUNER; + port->type = DDB_TUNER_DVBCT_TR; + ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING); + } + printk(KERN_INFO "Port %d (TAB %d): %s\n", + port->nr, port->nr+1, modname); +} + +static void ddb_input_init(struct ddb_port *port, int nr) +{ + struct ddb *dev = port->dev; + struct ddb_input *input = &dev->input[nr]; + + input->nr = nr; + input->port = port; + input->dma_buf_num = INPUT_DMA_BUFS; + input->dma_buf_size = INPUT_DMA_SIZE; + ddbwritel(0, TS_INPUT_CONTROL(nr)); + ddbwritel(2, TS_INPUT_CONTROL(nr)); + ddbwritel(0, TS_INPUT_CONTROL(nr)); + ddbwritel(0, DMA_BUFFER_ACK(nr)); + tasklet_init(&input->tasklet, input_tasklet, (unsigned long) input); + spin_lock_init(&input->lock); + init_waitqueue_head(&input->wq); +} + +static void ddb_output_init(struct ddb_port *port, int nr) +{ + struct ddb *dev = port->dev; + struct ddb_output *output = &dev->output[nr]; + output->nr = nr; + output->port = port; + output->dma_buf_num = OUTPUT_DMA_BUFS; + output->dma_buf_size = OUTPUT_DMA_SIZE; + + ddbwritel(0, TS_OUTPUT_CONTROL(nr)); + ddbwritel(2, TS_OUTPUT_CONTROL(nr)); + ddbwritel(0, TS_OUTPUT_CONTROL(nr)); + tasklet_init(&output->tasklet, output_tasklet, (unsigned long) output); + init_waitqueue_head(&output->wq); +} + +static void ddb_ports_init(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + port->dev = dev; + port->nr = i; + port->i2c = &dev->i2c[i]; + port->input[0] = &dev->input[2 * i]; + port->input[1] = &dev->input[2 * i + 1]; + port->output = &dev->output[i]; + + mutex_init(&port->i2c_gate_lock); + ddb_port_probe(port); + ddb_input_init(port, 2 * i); + ddb_input_init(port, 2 * i + 1); + ddb_output_init(port, i); + } +} + +static void ddb_ports_release(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + port->dev = dev; + tasklet_kill(&port->input[0]->tasklet); + tasklet_kill(&port->input[1]->tasklet); + tasklet_kill(&port->output->tasklet); + } +} + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static void irq_handle_i2c(struct ddb *dev, int n) +{ + struct ddb_i2c *i2c = &dev->i2c[n]; + + i2c->done = 1; + wake_up(&i2c->wq); +} + +static irqreturn_t irq_handler(int irq, void *dev_id) +{ + struct ddb *dev = (struct ddb *) dev_id; + u32 s = ddbreadl(INTERRUPT_STATUS); + + if (!s) + return IRQ_NONE; + + do { + ddbwritel(s, INTERRUPT_ACK); + + if (s & 0x00000001) + irq_handle_i2c(dev, 0); + if (s & 0x00000002) + irq_handle_i2c(dev, 1); + if (s & 0x00000004) + irq_handle_i2c(dev, 2); + if (s & 0x00000008) + irq_handle_i2c(dev, 3); + + if (s & 0x00000100) + tasklet_schedule(&dev->input[0].tasklet); + if (s & 0x00000200) + tasklet_schedule(&dev->input[1].tasklet); + if (s & 0x00000400) + tasklet_schedule(&dev->input[2].tasklet); + if (s & 0x00000800) + tasklet_schedule(&dev->input[3].tasklet); + if (s & 0x00001000) + tasklet_schedule(&dev->input[4].tasklet); + if (s & 0x00002000) + tasklet_schedule(&dev->input[5].tasklet); + if (s & 0x00004000) + tasklet_schedule(&dev->input[6].tasklet); + if (s & 0x00008000) + tasklet_schedule(&dev->input[7].tasklet); + + if (s & 0x00010000) + tasklet_schedule(&dev->output[0].tasklet); + if (s & 0x00020000) + tasklet_schedule(&dev->output[1].tasklet); + if (s & 0x00040000) + tasklet_schedule(&dev->output[2].tasklet); + if (s & 0x00080000) + tasklet_schedule(&dev->output[3].tasklet); + + /* if (s & 0x000f0000) printk(KERN_DEBUG "%08x\n", istat); */ + } while ((s = ddbreadl(INTERRUPT_STATUS))); + + return IRQ_HANDLED; +} + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +static int flashio(struct ddb *dev, u8 *wbuf, u32 wlen, u8 *rbuf, u32 rlen) +{ + u32 data, shift; + + if (wlen > 4) + ddbwritel(1, SPI_CONTROL); + while (wlen > 4) { + /* FIXME: check for big-endian */ + data = swab32(*(u32 *)wbuf); + wbuf += 4; + wlen -= 4; + ddbwritel(data, SPI_DATA); + while (ddbreadl(SPI_CONTROL) & 0x0004) + ; + } + + if (rlen) + ddbwritel(0x0001 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL); + else + ddbwritel(0x0003 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL); + + data = 0; + shift = ((4 - wlen) * 8); + while (wlen) { + data <<= 8; + data |= *wbuf; + wlen--; + wbuf++; + } + if (shift) + data <<= shift; + ddbwritel(data, SPI_DATA); + while (ddbreadl(SPI_CONTROL) & 0x0004) + ; + + if (!rlen) { + ddbwritel(0, SPI_CONTROL); + return 0; + } + if (rlen > 4) + ddbwritel(1, SPI_CONTROL); + + while (rlen > 4) { + ddbwritel(0xffffffff, SPI_DATA); + while (ddbreadl(SPI_CONTROL) & 0x0004) + ; + data = ddbreadl(SPI_DATA); + *(u32 *) rbuf = swab32(data); + rbuf += 4; + rlen -= 4; + } + ddbwritel(0x0003 | ((rlen << (8 + 3)) & 0x1F00), SPI_CONTROL); + ddbwritel(0xffffffff, SPI_DATA); + while (ddbreadl(SPI_CONTROL) & 0x0004) + ; + + data = ddbreadl(SPI_DATA); + ddbwritel(0, SPI_CONTROL); + + if (rlen < 4) + data <<= ((4 - rlen) * 8); + + while (rlen > 0) { + *rbuf = ((data >> 24) & 0xff); + data <<= 8; + rbuf++; + rlen--; + } + return 0; +} + +#define DDB_MAGIC 'd' + +struct ddb_flashio { + __u8 *write_buf; + __u32 write_len; + __u8 *read_buf; + __u32 read_len; +}; + +#define IOCTL_DDB_FLASHIO _IOWR(DDB_MAGIC, 0x00, struct ddb_flashio) + +#define DDB_NAME "ddbridge" + +static u32 ddb_num; +static struct ddb *ddbs[32]; +static struct class *ddb_class; +static int ddb_major; + +static int ddb_open(struct inode *inode, struct file *file) +{ + struct ddb *dev = ddbs[iminor(inode)]; + + file->private_data = dev; + return 0; +} + +static long ddb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct ddb *dev = file->private_data; + void *parg = (void *)arg; + int res; + + switch (cmd) { + case IOCTL_DDB_FLASHIO: + { + struct ddb_flashio fio; + u8 *rbuf, *wbuf; + + if (copy_from_user(&fio, parg, sizeof(fio))) + return -EFAULT; + + if (fio.write_len > 1028 || fio.read_len > 1028) + return -EINVAL; + if (fio.write_len + fio.read_len > 1028) + return -EINVAL; + + wbuf = &dev->iobuf[0]; + rbuf = wbuf + fio.write_len; + + if (copy_from_user(wbuf, fio.write_buf, fio.write_len)) + return -EFAULT; + res = flashio(dev, wbuf, fio.write_len, rbuf, fio.read_len); + if (res) + return res; + if (copy_to_user(fio.read_buf, rbuf, fio.read_len)) + return -EFAULT; + break; + } + default: + return -ENOTTY; + } + return 0; +} + +static const struct file_operations ddb_fops = { + .unlocked_ioctl = ddb_ioctl, + .open = ddb_open, +}; + +static char *ddb_devnode(struct device *device, umode_t *mode) +{ + struct ddb *dev = dev_get_drvdata(device); + + return kasprintf(GFP_KERNEL, "ddbridge/card%d", dev->nr); +} + +static int ddb_class_create(void) +{ + ddb_major = register_chrdev(0, DDB_NAME, &ddb_fops); + if (ddb_major < 0) + return ddb_major; + + ddb_class = class_create(THIS_MODULE, DDB_NAME); + if (IS_ERR(ddb_class)) { + unregister_chrdev(ddb_major, DDB_NAME); + return PTR_ERR(ddb_class); + } + ddb_class->devnode = ddb_devnode; + return 0; +} + +static void ddb_class_destroy(void) +{ + class_destroy(ddb_class); + unregister_chrdev(ddb_major, DDB_NAME); +} + +static int ddb_device_create(struct ddb *dev) +{ + dev->nr = ddb_num++; + dev->ddb_dev = device_create(ddb_class, NULL, + MKDEV(ddb_major, dev->nr), + dev, "ddbridge%d", dev->nr); + ddbs[dev->nr] = dev; + if (IS_ERR(dev->ddb_dev)) + return -1; + return 0; +} + +static void ddb_device_destroy(struct ddb *dev) +{ + ddb_num--; + if (IS_ERR(dev->ddb_dev)) + return; + device_destroy(ddb_class, MKDEV(ddb_major, 0)); +} + + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static void ddb_unmap(struct ddb *dev) +{ + if (dev->regs) + iounmap(dev->regs); + vfree(dev); +} + + +static void ddb_remove(struct pci_dev *pdev) +{ + struct ddb *dev = (struct ddb *) pci_get_drvdata(pdev); + + ddb_ports_detach(dev); + ddb_i2c_release(dev); + + ddbwritel(0, INTERRUPT_ENABLE); + free_irq(dev->pdev->irq, dev); +#ifdef CONFIG_PCI_MSI + if (dev->msi) + pci_disable_msi(dev->pdev); +#endif + ddb_ports_release(dev); + ddb_buffers_free(dev); + ddb_device_destroy(dev); + + ddb_unmap(dev); + pci_set_drvdata(pdev, 0); + pci_disable_device(pdev); +} + + +static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct ddb *dev; + int stat = 0; + int irq_flag = IRQF_SHARED; + + if (pci_enable_device(pdev) < 0) + return -ENODEV; + + dev = vmalloc(sizeof(struct ddb)); + if (dev == NULL) + return -ENOMEM; + memset(dev, 0, sizeof(struct ddb)); + + dev->pdev = pdev; + pci_set_drvdata(pdev, dev); + dev->info = (struct ddb_info *) id->driver_data; + printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name); + + dev->regs = ioremap(pci_resource_start(dev->pdev, 0), + pci_resource_len(dev->pdev, 0)); + if (!dev->regs) { + stat = -ENOMEM; + goto fail; + } + printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4)); + +#ifdef CONFIG_PCI_MSI + if (pci_msi_enabled()) + stat = pci_enable_msi(dev->pdev); + if (stat) { + printk(KERN_INFO ": MSI not available.\n"); + } else { + irq_flag = 0; + dev->msi = 1; + } +#endif + stat = request_irq(dev->pdev->irq, irq_handler, + irq_flag, "DDBridge", (void *) dev); + if (stat < 0) + goto fail1; + ddbwritel(0, DMA_BASE_WRITE); + ddbwritel(0, DMA_BASE_READ); + ddbwritel(0xffffffff, INTERRUPT_ACK); + ddbwritel(0xfff0f, INTERRUPT_ENABLE); + ddbwritel(0, MSI1_ENABLE); + + if (ddb_i2c_init(dev) < 0) + goto fail1; + ddb_ports_init(dev); + if (ddb_buffers_alloc(dev) < 0) { + printk(KERN_INFO ": Could not allocate buffer memory\n"); + goto fail2; + } + if (ddb_ports_attach(dev) < 0) + goto fail3; + ddb_device_create(dev); + return 0; + +fail3: + ddb_ports_detach(dev); + printk(KERN_ERR "fail3\n"); + ddb_ports_release(dev); +fail2: + printk(KERN_ERR "fail2\n"); + ddb_buffers_free(dev); +fail1: + printk(KERN_ERR "fail1\n"); + if (dev->msi) + pci_disable_msi(dev->pdev); + free_irq(dev->pdev->irq, dev); +fail: + printk(KERN_ERR "fail\n"); + ddb_unmap(dev); + pci_set_drvdata(pdev, 0); + pci_disable_device(pdev); + return -1; +} + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +static struct ddb_info ddb_none = { + .type = DDB_NONE, + .name = "Digital Devices PCIe bridge", +}; + +static struct ddb_info ddb_octopus = { + .type = DDB_OCTOPUS, + .name = "Digital Devices Octopus DVB adapter", + .port_num = 4, +}; + +static struct ddb_info ddb_octopus_le = { + .type = DDB_OCTOPUS, + .name = "Digital Devices Octopus LE DVB adapter", + .port_num = 2, +}; + +static struct ddb_info ddb_v6 = { + .type = DDB_OCTOPUS, + .name = "Digital Devices Cine S2 V6 DVB adapter", + .port_num = 3, +}; + +#define DDVID 0xdd01 /* Digital Devices Vendor ID */ + +#define DDB_ID(_vend, _dev, _subvend, _subdev, _driverdata) { \ + .vendor = _vend, .device = _dev, \ + .subvendor = _subvend, .subdevice = _subdev, \ + .driver_data = (unsigned long)&_driverdata } + +static const struct pci_device_id ddb_id_tbl[] = { + DDB_ID(DDVID, 0x0002, DDVID, 0x0001, ddb_octopus), + DDB_ID(DDVID, 0x0003, DDVID, 0x0001, ddb_octopus), + DDB_ID(DDVID, 0x0003, DDVID, 0x0002, ddb_octopus_le), + DDB_ID(DDVID, 0x0003, DDVID, 0x0010, ddb_octopus), + DDB_ID(DDVID, 0x0003, DDVID, 0x0020, ddb_v6), + /* in case sub-ids got deleted in flash */ + DDB_ID(DDVID, 0x0003, PCI_ANY_ID, PCI_ANY_ID, ddb_none), + {0} +}; +MODULE_DEVICE_TABLE(pci, ddb_id_tbl); + + +static struct pci_driver ddb_pci_driver = { + .name = "DDBridge", + .id_table = ddb_id_tbl, + .probe = ddb_probe, + .remove = ddb_remove, +}; + +static __init int module_init_ddbridge(void) +{ + int ret; + + printk(KERN_INFO "Digital Devices PCIE bridge driver, " + "Copyright (C) 2010-11 Digital Devices GmbH\n"); + + ret = ddb_class_create(); + if (ret < 0) + return ret; + ret = pci_register_driver(&ddb_pci_driver); + if (ret < 0) + ddb_class_destroy(); + return ret; +} + +static __exit void module_exit_ddbridge(void) +{ + pci_unregister_driver(&ddb_pci_driver); + ddb_class_destroy(); +} + +module_init(module_init_ddbridge); +module_exit(module_exit_ddbridge); + +MODULE_DESCRIPTION("Digital Devices PCIe Bridge"); +MODULE_AUTHOR("Ralph Metzler"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.5"); diff --git a/drivers/media/pci/ddbridge/ddbridge-regs.h b/drivers/media/pci/ddbridge/ddbridge-regs.h new file mode 100644 index 00000000..a3ccb318 --- /dev/null +++ b/drivers/media/pci/ddbridge/ddbridge-regs.h @@ -0,0 +1,151 @@ +/* + * ddbridge-regs.h: Digital Devices PCIe bridge driver + * + * Copyright (C) 2010-2011 Digital Devices GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +/* DD-DVBBridgeV1.h 273 2010-09-17 05:03:16Z manfred */ + +/* Register Definitions */ + +#define CUR_REGISTERMAP_VERSION 0x10000 + +#define HARDWARE_VERSION 0x00 +#define REGISTERMAP_VERSION 0x04 + +/* ------------------------------------------------------------------------- */ +/* SPI Controller */ + +#define SPI_CONTROL 0x10 +#define SPI_DATA 0x14 + +/* ------------------------------------------------------------------------- */ + +/* Interrupt controller */ +/* How many MSI's are available depends on HW (Min 2 max 8) */ +/* How many are usable also depends on Host platform */ + +#define INTERRUPT_BASE (0x40) + +#define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00) +#define MSI0_ENABLE (INTERRUPT_BASE + 0x00) +#define MSI1_ENABLE (INTERRUPT_BASE + 0x04) +#define MSI2_ENABLE (INTERRUPT_BASE + 0x08) +#define MSI3_ENABLE (INTERRUPT_BASE + 0x0C) +#define MSI4_ENABLE (INTERRUPT_BASE + 0x10) +#define MSI5_ENABLE (INTERRUPT_BASE + 0x14) +#define MSI6_ENABLE (INTERRUPT_BASE + 0x18) +#define MSI7_ENABLE (INTERRUPT_BASE + 0x1C) + +#define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20) +#define INTERRUPT_ACK (INTERRUPT_BASE + 0x20) + +#define INTMASK_I2C1 (0x00000001) +#define INTMASK_I2C2 (0x00000002) +#define INTMASK_I2C3 (0x00000004) +#define INTMASK_I2C4 (0x00000008) + +#define INTMASK_CIRQ1 (0x00000010) +#define INTMASK_CIRQ2 (0x00000020) +#define INTMASK_CIRQ3 (0x00000040) +#define INTMASK_CIRQ4 (0x00000080) + +#define INTMASK_TSINPUT1 (0x00000100) +#define INTMASK_TSINPUT2 (0x00000200) +#define INTMASK_TSINPUT3 (0x00000400) +#define INTMASK_TSINPUT4 (0x00000800) +#define INTMASK_TSINPUT5 (0x00001000) +#define INTMASK_TSINPUT6 (0x00002000) +#define INTMASK_TSINPUT7 (0x00004000) +#define INTMASK_TSINPUT8 (0x00008000) + +#define INTMASK_TSOUTPUT1 (0x00010000) +#define INTMASK_TSOUTPUT2 (0x00020000) +#define INTMASK_TSOUTPUT3 (0x00040000) +#define INTMASK_TSOUTPUT4 (0x00080000) + +/* ------------------------------------------------------------------------- */ +/* I2C Master Controller */ + +#define I2C_BASE (0x80) /* Byte offset */ + +#define I2C_COMMAND (0x00) +#define I2C_TIMING (0x04) +#define I2C_TASKLENGTH (0x08) /* High read, low write */ +#define I2C_TASKADDRESS (0x0C) /* High read, low write */ + +#define I2C_MONITOR (0x1C) + +#define I2C_BASE_1 (I2C_BASE + 0x00) +#define I2C_BASE_2 (I2C_BASE + 0x20) +#define I2C_BASE_3 (I2C_BASE + 0x40) +#define I2C_BASE_4 (I2C_BASE + 0x60) + +#define I2C_BASE_N(i) (I2C_BASE + (i) * 0x20) + +#define I2C_TASKMEM_BASE (0x1000) /* Byte offset */ +#define I2C_TASKMEM_SIZE (0x1000) + +#define I2C_SPEED_400 (0x04030404) +#define I2C_SPEED_200 (0x09080909) +#define I2C_SPEED_154 (0x0C0B0C0C) +#define I2C_SPEED_100 (0x13121313) +#define I2C_SPEED_77 (0x19181919) +#define I2C_SPEED_50 (0x27262727) + + +/* ------------------------------------------------------------------------- */ +/* DMA Controller */ + +#define DMA_BASE_WRITE (0x100) +#define DMA_BASE_READ (0x140) + +#define DMA_CONTROL (0x00) /* 64 */ +#define DMA_ERROR (0x04) /* 65 ( only read instance ) */ + +#define DMA_DIAG_CONTROL (0x1C) /* 71 */ +#define DMA_DIAG_PACKETCOUNTER_LOW (0x20) /* 72 */ +#define DMA_DIAG_PACKETCOUNTER_HIGH (0x24) /* 73 */ +#define DMA_DIAG_TIMECOUNTER_LOW (0x28) /* 74 */ +#define DMA_DIAG_TIMECOUNTER_HIGH (0x2C) /* 75 */ +#define DMA_DIAG_RECHECKCOUNTER (0x30) /* 76 ( Split completions on read ) */ +#define DMA_DIAG_WAITTIMEOUTINIT (0x34) /* 77 */ +#define DMA_DIAG_WAITOVERFLOWCOUNTER (0x38) /* 78 */ +#define DMA_DIAG_WAITCOUNTER (0x3C) /* 79 */ + +/* ------------------------------------------------------------------------- */ +/* DMA Buffer */ + +#define TS_INPUT_BASE (0x200) +#define TS_INPUT_CONTROL(i) (TS_INPUT_BASE + (i) * 16 + 0x00) + +#define TS_OUTPUT_BASE (0x280) +#define TS_OUTPUT_CONTROL(i) (TS_OUTPUT_BASE + (i) * 16 + 0x00) + +#define DMA_BUFFER_BASE (0x300) + +#define DMA_BUFFER_CONTROL(i) (DMA_BUFFER_BASE + (i) * 16 + 0x00) +#define DMA_BUFFER_ACK(i) (DMA_BUFFER_BASE + (i) * 16 + 0x04) +#define DMA_BUFFER_CURRENT(i) (DMA_BUFFER_BASE + (i) * 16 + 0x08) +#define DMA_BUFFER_SIZE(i) (DMA_BUFFER_BASE + (i) * 16 + 0x0c) + +#define DMA_BASE_ADDRESS_TABLE (0x2000) +#define DMA_BASE_ADDRESS_TABLE_ENTRIES (512) + diff --git a/drivers/media/pci/ddbridge/ddbridge.h b/drivers/media/pci/ddbridge/ddbridge.h new file mode 100644 index 00000000..8b1b41d2 --- /dev/null +++ b/drivers/media/pci/ddbridge/ddbridge.h @@ -0,0 +1,185 @@ +/* + * ddbridge.h: Digital Devices PCIe bridge driver + * + * Copyright (C) 2010-2011 Digital Devices GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef _DDBRIDGE_H_ +#define _DDBRIDGE_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_ringbuffer.h" +#include "dvb_ca_en50221.h" +#include "dvb_net.h" +#include "cxd2099.h" + +#define DDB_MAX_I2C 4 +#define DDB_MAX_PORT 4 +#define DDB_MAX_INPUT 8 +#define DDB_MAX_OUTPUT 4 + +struct ddb_info { + int type; +#define DDB_NONE 0 +#define DDB_OCTOPUS 1 + char *name; + int port_num; + u32 port_type[DDB_MAX_PORT]; +}; + +/* DMA_SIZE MUST be divisible by 188 and 128 !!! */ + +#define INPUT_DMA_MAX_BUFS 32 /* hardware table limit */ +#define INPUT_DMA_BUFS 8 +#define INPUT_DMA_SIZE (128*47*21) + +#define OUTPUT_DMA_MAX_BUFS 32 +#define OUTPUT_DMA_BUFS 8 +#define OUTPUT_DMA_SIZE (128*47*21) + +struct ddb; +struct ddb_port; + +struct ddb_input { + struct ddb_port *port; + u32 nr; + int attached; + + dma_addr_t pbuf[INPUT_DMA_MAX_BUFS]; + u8 *vbuf[INPUT_DMA_MAX_BUFS]; + u32 dma_buf_num; + u32 dma_buf_size; + + struct tasklet_struct tasklet; + spinlock_t lock; + wait_queue_head_t wq; + int running; + u32 stat; + u32 cbuf; + u32 coff; + + struct dvb_adapter adap; + struct dvb_device *dev; + struct dvb_frontend *fe; + struct dvb_frontend *fe2; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dvb_net dvbnet; + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + int users; + int (*gate_ctrl)(struct dvb_frontend *, int); +}; + +struct ddb_output { + struct ddb_port *port; + u32 nr; + dma_addr_t pbuf[OUTPUT_DMA_MAX_BUFS]; + u8 *vbuf[OUTPUT_DMA_MAX_BUFS]; + u32 dma_buf_num; + u32 dma_buf_size; + struct tasklet_struct tasklet; + spinlock_t lock; + wait_queue_head_t wq; + int running; + u32 stat; + u32 cbuf; + u32 coff; + + struct dvb_adapter adap; + struct dvb_device *dev; +}; + +struct ddb_i2c { + struct ddb *dev; + u32 nr; + struct i2c_adapter adap; + struct i2c_adapter adap2; + u32 regs; + u32 rbuf; + u32 wbuf; + int done; + wait_queue_head_t wq; +}; + +struct ddb_port { + struct ddb *dev; + u32 nr; + struct ddb_i2c *i2c; + struct mutex i2c_gate_lock; + u32 class; +#define DDB_PORT_NONE 0 +#define DDB_PORT_CI 1 +#define DDB_PORT_TUNER 2 + u32 type; +#define DDB_TUNER_NONE 0 +#define DDB_TUNER_DVBS_ST 1 +#define DDB_TUNER_DVBS_ST_AA 2 +#define DDB_TUNER_DVBCT_TR 16 +#define DDB_TUNER_DVBCT_ST 17 + u32 adr; + + struct ddb_input *input[2]; + struct ddb_output *output; + struct dvb_ca_en50221 *en; +}; + +struct ddb { + struct pci_dev *pdev; + unsigned char *regs; + struct ddb_port port[DDB_MAX_PORT]; + struct ddb_i2c i2c[DDB_MAX_I2C]; + struct ddb_input input[DDB_MAX_INPUT]; + struct ddb_output output[DDB_MAX_OUTPUT]; + + struct device *ddb_dev; + int nr; + u8 iobuf[1028]; + + struct ddb_info *info; + int msi; +}; + +/****************************************************************************/ + +#define ddbwritel(_val, _adr) writel((_val), \ + (char *) (dev->regs+(_adr))) +#define ddbreadl(_adr) readl((char *) (dev->regs+(_adr))) +#define ddbcpyto(_adr, _src, _count) memcpy_toio((char *) \ + (dev->regs+(_adr)), (_src), (_count)) +#define ddbcpyfrom(_dst, _adr, _count) memcpy_fromio((_dst), (char *) \ + (dev->regs+(_adr)), (_count)) + +/****************************************************************************/ + +#endif diff --git a/drivers/media/pci/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig new file mode 100644 index 00000000..173daf0c --- /dev/null +++ b/drivers/media/pci/dm1105/Kconfig @@ -0,0 +1,21 @@ +config DVB_DM1105 + tristate "SDMC DM1105 based PCI cards" + depends on DVB_CORE && PCI && I2C + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT + select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT + depends on RC_CORE + help + Support for cards based on the SDMC DM1105 PCI chip like + DvbWorld 2002 + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y or M if you own such a device and want to use it. diff --git a/drivers/media/pci/dm1105/Makefile b/drivers/media/pci/dm1105/Makefile new file mode 100644 index 00000000..32758514 --- /dev/null +++ b/drivers/media/pci/dm1105/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_DVB_DM1105) += dm1105.o + +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c new file mode 100644 index 00000000..026767be --- /dev/null +++ b/drivers/media/pci/dm1105/dm1105.c @@ -0,0 +1,1259 @@ +/* + * dm1105.c - driver for DVB cards based on SDMC DM1105 PCI chip + * + * Copyright (C) 2008 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" +#include "dvb-pll.h" + +#include "stv0299.h" +#include "stv0288.h" +#include "stb6000.h" +#include "si21xx.h" +#include "cx24116.h" +#include "z0194a.h" +#include "ts2020.h" +#include "ds3000.h" + +#define MODULE_NAME "dm1105" + +#define UNSET (-1U) + +#define DM1105_BOARD_NOAUTO UNSET +#define DM1105_BOARD_UNKNOWN 0 +#define DM1105_BOARD_DVBWORLD_2002 1 +#define DM1105_BOARD_DVBWORLD_2004 2 +#define DM1105_BOARD_AXESS_DM05 3 +#define DM1105_BOARD_UNBRANDED_I2C_ON_GPIO 4 + +/* ----------------------------------------------- */ +/* + * PCI ID's + */ +#ifndef PCI_VENDOR_ID_TRIGEM +#define PCI_VENDOR_ID_TRIGEM 0x109f +#endif +#ifndef PCI_VENDOR_ID_AXESS +#define PCI_VENDOR_ID_AXESS 0x195d +#endif +#ifndef PCI_DEVICE_ID_DM1105 +#define PCI_DEVICE_ID_DM1105 0x036f +#endif +#ifndef PCI_DEVICE_ID_DW2002 +#define PCI_DEVICE_ID_DW2002 0x2002 +#endif +#ifndef PCI_DEVICE_ID_DW2004 +#define PCI_DEVICE_ID_DW2004 0x2004 +#endif +#ifndef PCI_DEVICE_ID_DM05 +#define PCI_DEVICE_ID_DM05 0x1105 +#endif +/* ----------------------------------------------- */ +/* sdmc dm1105 registers */ + +/* TS Control */ +#define DM1105_TSCTR 0x00 +#define DM1105_DTALENTH 0x04 + +/* GPIO Interface */ +#define DM1105_GPIOVAL 0x08 +#define DM1105_GPIOCTR 0x0c + +/* PID serial number */ +#define DM1105_PIDN 0x10 + +/* Odd-even secret key select */ +#define DM1105_CWSEL 0x14 + +/* Host Command Interface */ +#define DM1105_HOST_CTR 0x18 +#define DM1105_HOST_AD 0x1c + +/* PCI Interface */ +#define DM1105_CR 0x30 +#define DM1105_RST 0x34 +#define DM1105_STADR 0x38 +#define DM1105_RLEN 0x3c +#define DM1105_WRP 0x40 +#define DM1105_INTCNT 0x44 +#define DM1105_INTMAK 0x48 +#define DM1105_INTSTS 0x4c + +/* CW Value */ +#define DM1105_ODD 0x50 +#define DM1105_EVEN 0x58 + +/* PID Value */ +#define DM1105_PID 0x60 + +/* IR Control */ +#define DM1105_IRCTR 0x64 +#define DM1105_IRMODE 0x68 +#define DM1105_SYSTEMCODE 0x6c +#define DM1105_IRCODE 0x70 + +/* Unknown Values */ +#define DM1105_ENCRYPT 0x74 +#define DM1105_VER 0x7c + +/* I2C Interface */ +#define DM1105_I2CCTR 0x80 +#define DM1105_I2CSTS 0x81 +#define DM1105_I2CDAT 0x82 +#define DM1105_I2C_RA 0x83 +/* ----------------------------------------------- */ +/* Interrupt Mask Bits */ + +#define INTMAK_TSIRQM 0x01 +#define INTMAK_HIRQM 0x04 +#define INTMAK_IRM 0x08 +#define INTMAK_ALLMASK (INTMAK_TSIRQM | \ + INTMAK_HIRQM | \ + INTMAK_IRM) +#define INTMAK_NONEMASK 0x00 + +/* Interrupt Status Bits */ +#define INTSTS_TSIRQ 0x01 +#define INTSTS_HIRQ 0x04 +#define INTSTS_IR 0x08 + +/* IR Control Bits */ +#define DM1105_IR_EN 0x01 +#define DM1105_SYS_CHK 0x02 +#define DM1105_REP_FLG 0x08 + +/* EEPROM addr */ +#define IIC_24C01_addr 0xa0 +/* Max board count */ +#define DM1105_MAX 0x04 + +#define DRIVER_NAME "dm1105" +#define DM1105_I2C_GPIO_NAME "dm1105-gpio" + +#define DM1105_DMA_PACKETS 47 +#define DM1105_DMA_PACKET_LENGTH (128*4) +#define DM1105_DMA_BYTES (128 * 4 * DM1105_DMA_PACKETS) + +/* */ +#define GPIO08 (1 << 8) +#define GPIO13 (1 << 13) +#define GPIO14 (1 << 14) +#define GPIO15 (1 << 15) +#define GPIO16 (1 << 16) +#define GPIO17 (1 << 17) +#define GPIO_ALL 0x03ffff + +/* GPIO's for LNB power control */ +#define DM1105_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13)) +#define DM1105_LNB_OFF GPIO17 +#define DM1105_LNB_13V (GPIO16 | GPIO08) +#define DM1105_LNB_18V GPIO08 + +/* GPIO's for LNB power control for Axess DM05 */ +#define DM05_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13)) +#define DM05_LNB_OFF GPIO17/* actually 13v */ +#define DM05_LNB_13V GPIO17 +#define DM05_LNB_18V (GPIO17 | GPIO16) + +/* GPIO's for LNB power control for unbranded with I2C on GPIO */ +#define UNBR_LNB_MASK (GPIO17 | GPIO16) +#define UNBR_LNB_OFF 0 +#define UNBR_LNB_13V GPIO17 +#define UNBR_LNB_18V (GPIO17 | GPIO16) + +static unsigned int card[] = {[0 ... 3] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +static int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); + +static unsigned int dm1105_devcount; + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct dm1105_board { + char *name; + struct { + u32 mask, off, v13, v18; + } lnb; + u32 gpio_scl, gpio_sda; +}; + +struct dm1105_subid { + u16 subvendor; + u16 subdevice; + u32 card; +}; + +static const struct dm1105_board dm1105_boards[] = { + [DM1105_BOARD_UNKNOWN] = { + .name = "UNKNOWN/GENERIC", + .lnb = { + .mask = DM1105_LNB_MASK, + .off = DM1105_LNB_OFF, + .v13 = DM1105_LNB_13V, + .v18 = DM1105_LNB_18V, + }, + }, + [DM1105_BOARD_DVBWORLD_2002] = { + .name = "DVBWorld PCI 2002", + .lnb = { + .mask = DM1105_LNB_MASK, + .off = DM1105_LNB_OFF, + .v13 = DM1105_LNB_13V, + .v18 = DM1105_LNB_18V, + }, + }, + [DM1105_BOARD_DVBWORLD_2004] = { + .name = "DVBWorld PCI 2004", + .lnb = { + .mask = DM1105_LNB_MASK, + .off = DM1105_LNB_OFF, + .v13 = DM1105_LNB_13V, + .v18 = DM1105_LNB_18V, + }, + }, + [DM1105_BOARD_AXESS_DM05] = { + .name = "Axess/EasyTv DM05", + .lnb = { + .mask = DM05_LNB_MASK, + .off = DM05_LNB_OFF, + .v13 = DM05_LNB_13V, + .v18 = DM05_LNB_18V, + }, + }, + [DM1105_BOARD_UNBRANDED_I2C_ON_GPIO] = { + .name = "Unbranded DM1105 with i2c on GPIOs", + .lnb = { + .mask = UNBR_LNB_MASK, + .off = UNBR_LNB_OFF, + .v13 = UNBR_LNB_13V, + .v18 = UNBR_LNB_18V, + }, + .gpio_scl = GPIO14, + .gpio_sda = GPIO13, + }, +}; + +static const struct dm1105_subid dm1105_subids[] = { + { + .subvendor = 0x0000, + .subdevice = 0x2002, + .card = DM1105_BOARD_DVBWORLD_2002, + }, { + .subvendor = 0x0001, + .subdevice = 0x2002, + .card = DM1105_BOARD_DVBWORLD_2002, + }, { + .subvendor = 0x0000, + .subdevice = 0x2004, + .card = DM1105_BOARD_DVBWORLD_2004, + }, { + .subvendor = 0x0001, + .subdevice = 0x2004, + .card = DM1105_BOARD_DVBWORLD_2004, + }, { + .subvendor = 0x195d, + .subdevice = 0x1105, + .card = DM1105_BOARD_AXESS_DM05, + }, +}; + +static void dm1105_card_list(struct pci_dev *pci) +{ + int i; + + if (0 == pci->subsystem_vendor && + 0 == pci->subsystem_device) { + printk(KERN_ERR + "dm1105: Your board has no valid PCI Subsystem ID\n" + "dm1105: and thus can't be autodetected\n" + "dm1105: Please pass card= insmod option to\n" + "dm1105: workaround that. Redirect complaints to\n" + "dm1105: the vendor of the TV card. Best regards,\n" + "dm1105: -- tux\n"); + } else { + printk(KERN_ERR + "dm1105: Your board isn't known (yet) to the driver.\n" + "dm1105: You can try to pick one of the existing\n" + "dm1105: card configs via card= insmod option.\n" + "dm1105: Updating to the latest version might help\n" + "dm1105: as well.\n"); + } + printk(KERN_ERR "Here is a list of valid choices for the card= " + "insmod option:\n"); + for (i = 0; i < ARRAY_SIZE(dm1105_boards); i++) + printk(KERN_ERR "dm1105: card=%d -> %s\n", + i, dm1105_boards[i].name); +} + +/* infrared remote control */ +struct infrared { + struct rc_dev *dev; + char input_phys[32]; + struct work_struct work; + u32 ir_command; +}; + +struct dm1105_dev { + /* pci */ + struct pci_dev *pdev; + u8 __iomem *io_mem; + + /* ir */ + struct infrared ir; + + /* dvb */ + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + struct dmxdev dmxdev; + struct dvb_adapter dvb_adapter; + struct dvb_demux demux; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + unsigned int full_ts_users; + unsigned int boardnr; + int nr; + + /* i2c */ + struct i2c_adapter i2c_adap; + struct i2c_adapter i2c_bb_adap; + struct i2c_algo_bit_data i2c_bit; + + /* irq */ + struct work_struct work; + struct workqueue_struct *wq; + char wqn[16]; + + /* dma */ + dma_addr_t dma_addr; + unsigned char *ts_buf; + u32 wrp; + u32 nextwrp; + u32 buffer_size; + unsigned int PacketErrorCount; + unsigned int dmarst; + spinlock_t lock; +}; + +#define dm_io_mem(reg) ((unsigned long)(&dev->io_mem[reg])) + +#define dm_readb(reg) inb(dm_io_mem(reg)) +#define dm_writeb(reg, value) outb((value), (dm_io_mem(reg))) + +#define dm_readw(reg) inw(dm_io_mem(reg)) +#define dm_writew(reg, value) outw((value), (dm_io_mem(reg))) + +#define dm_readl(reg) inl(dm_io_mem(reg)) +#define dm_writel(reg, value) outl((value), (dm_io_mem(reg))) + +#define dm_andorl(reg, mask, value) \ + outl((inl(dm_io_mem(reg)) & ~(mask)) |\ + ((value) & (mask)), (dm_io_mem(reg))) + +#define dm_setl(reg, bit) dm_andorl((reg), (bit), (bit)) +#define dm_clearl(reg, bit) dm_andorl((reg), (bit), 0) + +/* The chip has 18 GPIOs. In HOST mode GPIO's used as 15 bit address lines, + so we can use only 3 GPIO's from GPIO15 to GPIO17. + Here I don't check whether HOST is enebled as it is not implemented yet. + */ +static void dm1105_gpio_set(struct dm1105_dev *dev, u32 mask) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if (mask & 0x0003ffff) + dm_setl(DM1105_GPIOVAL, mask & 0x0003ffff); + +} + +static void dm1105_gpio_clear(struct dm1105_dev *dev, u32 mask) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if (mask & 0x0003ffff) + dm_clearl(DM1105_GPIOVAL, mask & 0x0003ffff); + +} + +static void dm1105_gpio_andor(struct dm1105_dev *dev, u32 mask, u32 val) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if (mask & 0x0003ffff) + dm_andorl(DM1105_GPIOVAL, mask & 0x0003ffff, val); + +} + +static u32 dm1105_gpio_get(struct dm1105_dev *dev, u32 mask) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if (mask & 0x0003ffff) + return dm_readl(DM1105_GPIOVAL) & mask & 0x0003ffff; + + return 0; +} + +static void dm1105_gpio_enable(struct dm1105_dev *dev, u32 mask, int asoutput) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if ((mask & 0x0003ffff) && asoutput) + dm_clearl(DM1105_GPIOCTR, mask & 0x0003ffff); + else if ((mask & 0x0003ffff) && !asoutput) + dm_setl(DM1105_GPIOCTR, mask & 0x0003ffff); + +} + +static void dm1105_setline(struct dm1105_dev *dev, u32 line, int state) +{ + if (state) + dm1105_gpio_enable(dev, line, 0); + else { + dm1105_gpio_enable(dev, line, 1); + dm1105_gpio_clear(dev, line); + } +} + +static void dm1105_setsda(void *data, int state) +{ + struct dm1105_dev *dev = data; + + dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_sda, state); +} + +static void dm1105_setscl(void *data, int state) +{ + struct dm1105_dev *dev = data; + + dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_scl, state); +} + +static int dm1105_getsda(void *data) +{ + struct dm1105_dev *dev = data; + + return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_sda) + ? 1 : 0; +} + +static int dm1105_getscl(void *data) +{ + struct dm1105_dev *dev = data; + + return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_scl) + ? 1 : 0; +} + +static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg *msgs, int num) +{ + struct dm1105_dev *dev ; + + int addr, rc, i, j, k, len, byte, data; + u8 status; + + dev = i2c_adap->algo_data; + for (i = 0; i < num; i++) { + dm_writeb(DM1105_I2CCTR, 0x00); + if (msgs[i].flags & I2C_M_RD) { + /* read bytes */ + addr = msgs[i].addr << 1; + addr |= 1; + dm_writeb(DM1105_I2CDAT, addr); + for (byte = 0; byte < msgs[i].len; byte++) + dm_writeb(DM1105_I2CDAT + byte + 1, 0); + + dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len); + for (j = 0; j < 55; j++) { + mdelay(10); + status = dm_readb(DM1105_I2CSTS); + if ((status & 0xc0) == 0x40) + break; + } + if (j >= 55) + return -1; + + for (byte = 0; byte < msgs[i].len; byte++) { + rc = dm_readb(DM1105_I2CDAT + byte + 1); + if (rc < 0) + goto err; + msgs[i].buf[byte] = rc; + } + } else if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) { + /* prepaired for cx24116 firmware */ + /* Write in small blocks */ + len = msgs[i].len - 1; + k = 1; + do { + dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1); + dm_writeb(DM1105_I2CDAT + 1, 0xf7); + for (byte = 0; byte < (len > 48 ? 48 : len); byte++) { + data = msgs[i].buf[k + byte]; + dm_writeb(DM1105_I2CDAT + byte + 2, data); + } + dm_writeb(DM1105_I2CCTR, 0x82 + (len > 48 ? 48 : len)); + for (j = 0; j < 25; j++) { + mdelay(10); + status = dm_readb(DM1105_I2CSTS); + if ((status & 0xc0) == 0x40) + break; + } + + if (j >= 25) + return -1; + + k += 48; + len -= 48; + } while (len > 0); + } else { + /* write bytes */ + dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1); + for (byte = 0; byte < msgs[i].len; byte++) { + data = msgs[i].buf[byte]; + dm_writeb(DM1105_I2CDAT + byte + 1, data); + } + dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len); + for (j = 0; j < 25; j++) { + mdelay(10); + status = dm_readb(DM1105_I2CSTS); + if ((status & 0xc0) == 0x40) + break; + } + + if (j >= 25) + return -1; + } + } + return num; + err: + return rc; +} + +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dm1105_algo = { + .master_xfer = dm1105_i2c_xfer, + .functionality = functionality, +}; + +static inline struct dm1105_dev *feed_to_dm1105_dev(struct dvb_demux_feed *feed) +{ + return container_of(feed->demux, struct dm1105_dev, demux); +} + +static inline struct dm1105_dev *frontend_to_dm1105_dev(struct dvb_frontend *fe) +{ + return container_of(fe->dvb, struct dm1105_dev, dvb_adapter); +} + +static int dm1105_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct dm1105_dev *dev = frontend_to_dm1105_dev(fe); + + dm1105_gpio_enable(dev, dm1105_boards[dev->boardnr].lnb.mask, 1); + if (voltage == SEC_VOLTAGE_18) + dm1105_gpio_andor(dev, + dm1105_boards[dev->boardnr].lnb.mask, + dm1105_boards[dev->boardnr].lnb.v18); + else if (voltage == SEC_VOLTAGE_13) + dm1105_gpio_andor(dev, + dm1105_boards[dev->boardnr].lnb.mask, + dm1105_boards[dev->boardnr].lnb.v13); + else + dm1105_gpio_andor(dev, + dm1105_boards[dev->boardnr].lnb.mask, + dm1105_boards[dev->boardnr].lnb.off); + + return 0; +} + +static void dm1105_set_dma_addr(struct dm1105_dev *dev) +{ + dm_writel(DM1105_STADR, cpu_to_le32(dev->dma_addr)); +} + +static int dm1105_dma_map(struct dm1105_dev *dev) +{ + dev->ts_buf = pci_alloc_consistent(dev->pdev, + 6 * DM1105_DMA_BYTES, + &dev->dma_addr); + + return !dev->ts_buf; +} + +static void dm1105_dma_unmap(struct dm1105_dev *dev) +{ + pci_free_consistent(dev->pdev, + 6 * DM1105_DMA_BYTES, + dev->ts_buf, + dev->dma_addr); +} + +static void dm1105_enable_irqs(struct dm1105_dev *dev) +{ + dm_writeb(DM1105_INTMAK, INTMAK_ALLMASK); + dm_writeb(DM1105_CR, 1); +} + +static void dm1105_disable_irqs(struct dm1105_dev *dev) +{ + dm_writeb(DM1105_INTMAK, INTMAK_IRM); + dm_writeb(DM1105_CR, 0); +} + +static int dm1105_start_feed(struct dvb_demux_feed *f) +{ + struct dm1105_dev *dev = feed_to_dm1105_dev(f); + + if (dev->full_ts_users++ == 0) + dm1105_enable_irqs(dev); + + return 0; +} + +static int dm1105_stop_feed(struct dvb_demux_feed *f) +{ + struct dm1105_dev *dev = feed_to_dm1105_dev(f); + + if (--dev->full_ts_users == 0) + dm1105_disable_irqs(dev); + + return 0; +} + +/* ir work handler */ +static void dm1105_emit_key(struct work_struct *work) +{ + struct infrared *ir = container_of(work, struct infrared, work); + u32 ircom = ir->ir_command; + u8 data; + + if (ir_debug) + printk(KERN_INFO "%s: received byte 0x%04x\n", __func__, ircom); + + data = (ircom >> 8) & 0x7f; + + rc_keydown(ir->dev, data, 0); +} + +/* work handler */ +static void dm1105_dmx_buffer(struct work_struct *work) +{ + struct dm1105_dev *dev = container_of(work, struct dm1105_dev, work); + unsigned int nbpackets; + u32 oldwrp = dev->wrp; + u32 nextwrp = dev->nextwrp; + + if (!((dev->ts_buf[oldwrp] == 0x47) && + (dev->ts_buf[oldwrp + 188] == 0x47) && + (dev->ts_buf[oldwrp + 188 * 2] == 0x47))) { + dev->PacketErrorCount++; + /* bad packet found */ + if ((dev->PacketErrorCount >= 2) && + (dev->dmarst == 0)) { + dm_writeb(DM1105_RST, 1); + dev->wrp = 0; + dev->PacketErrorCount = 0; + dev->dmarst = 0; + return; + } + } + + if (nextwrp < oldwrp) { + memcpy(dev->ts_buf + dev->buffer_size, dev->ts_buf, nextwrp); + nbpackets = ((dev->buffer_size - oldwrp) + nextwrp) / 188; + } else + nbpackets = (nextwrp - oldwrp) / 188; + + dev->wrp = nextwrp; + dvb_dmx_swfilter_packets(&dev->demux, &dev->ts_buf[oldwrp], nbpackets); +} + +static irqreturn_t dm1105_irq(int irq, void *dev_id) +{ + struct dm1105_dev *dev = dev_id; + + /* Read-Write INSTS Ack's Interrupt for DM1105 chip 16.03.2008 */ + unsigned int intsts = dm_readb(DM1105_INTSTS); + dm_writeb(DM1105_INTSTS, intsts); + + switch (intsts) { + case INTSTS_TSIRQ: + case (INTSTS_TSIRQ | INTSTS_IR): + dev->nextwrp = dm_readl(DM1105_WRP) - dm_readl(DM1105_STADR); + queue_work(dev->wq, &dev->work); + break; + case INTSTS_IR: + dev->ir.ir_command = dm_readl(DM1105_IRCODE); + schedule_work(&dev->ir.work); + break; + } + + return IRQ_HANDLED; +} + +static int dm1105_ir_init(struct dm1105_dev *dm1105) +{ + struct rc_dev *dev; + int err = -ENOMEM; + + dev = rc_allocate_device(); + if (!dev) + return -ENOMEM; + + snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys), + "pci-%s/ir0", pci_name(dm1105->pdev)); + + dev->driver_name = MODULE_NAME; + dev->map_name = RC_MAP_DM1105_NEC; + dev->driver_type = RC_DRIVER_SCANCODE; + dev->input_name = "DVB on-card IR receiver"; + dev->input_phys = dm1105->ir.input_phys; + dev->input_id.bustype = BUS_PCI; + dev->input_id.version = 1; + if (dm1105->pdev->subsystem_vendor) { + dev->input_id.vendor = dm1105->pdev->subsystem_vendor; + dev->input_id.product = dm1105->pdev->subsystem_device; + } else { + dev->input_id.vendor = dm1105->pdev->vendor; + dev->input_id.product = dm1105->pdev->device; + } + dev->dev.parent = &dm1105->pdev->dev; + + INIT_WORK(&dm1105->ir.work, dm1105_emit_key); + + err = rc_register_device(dev); + if (err < 0) { + rc_free_device(dev); + return err; + } + + dm1105->ir.dev = dev; + return 0; +} + +static void dm1105_ir_exit(struct dm1105_dev *dm1105) +{ + rc_unregister_device(dm1105->ir.dev); +} + +static int dm1105_hw_init(struct dm1105_dev *dev) +{ + dm1105_disable_irqs(dev); + + dm_writeb(DM1105_HOST_CTR, 0); + + /*DATALEN 188,*/ + dm_writeb(DM1105_DTALENTH, 188); + /*TS_STRT TS_VALP MSBFIRST TS_MODE ALPAS TSPES*/ + dm_writew(DM1105_TSCTR, 0xc10a); + + /* map DMA and set address */ + dm1105_dma_map(dev); + dm1105_set_dma_addr(dev); + /* big buffer */ + dm_writel(DM1105_RLEN, 5 * DM1105_DMA_BYTES); + dm_writeb(DM1105_INTCNT, 47); + + /* IR NEC mode enable */ + dm_writeb(DM1105_IRCTR, (DM1105_IR_EN | DM1105_SYS_CHK)); + dm_writeb(DM1105_IRMODE, 0); + dm_writew(DM1105_SYSTEMCODE, 0); + + return 0; +} + +static void dm1105_hw_exit(struct dm1105_dev *dev) +{ + dm1105_disable_irqs(dev); + + /* IR disable */ + dm_writeb(DM1105_IRCTR, 0); + dm_writeb(DM1105_INTMAK, INTMAK_NONEMASK); + + dm1105_dma_unmap(dev); +} + +static struct stv0299_config sharp_z0194a_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, +}; + +static struct stv0288_config earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, +}; + +static struct si21xx_config serit_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + +}; + +static struct cx24116_config serit_sp2633_config = { + .demod_address = 0x55, +}; + +static struct ds3000_config dvbworld_ds3000_config = { + .demod_address = 0x68, +}; + +static struct ts2020_config dvbworld_ts2020_config = { + .tuner_address = 0x60, + .clk_out_div = 1, +}; + +static int frontend_init(struct dm1105_dev *dev) +{ + int ret; + + switch (dev->boardnr) { + case DM1105_BOARD_UNBRANDED_I2C_ON_GPIO: + dm1105_gpio_enable(dev, GPIO15, 1); + dm1105_gpio_clear(dev, GPIO15); + msleep(100); + dm1105_gpio_set(dev, GPIO15); + msleep(200); + dev->fe = dvb_attach( + stv0299_attach, &sharp_z0194a_config, + &dev->i2c_bb_adap); + if (dev->fe) { + dev->fe->ops.set_voltage = dm1105_set_voltage; + dvb_attach(dvb_pll_attach, dev->fe, 0x60, + &dev->i2c_bb_adap, DVB_PLL_OPERA1); + break; + } + + dev->fe = dvb_attach( + stv0288_attach, &earda_config, + &dev->i2c_bb_adap); + if (dev->fe) { + dev->fe->ops.set_voltage = dm1105_set_voltage; + dvb_attach(stb6000_attach, dev->fe, 0x61, + &dev->i2c_bb_adap); + break; + } + + dev->fe = dvb_attach( + si21xx_attach, &serit_config, + &dev->i2c_bb_adap); + if (dev->fe) + dev->fe->ops.set_voltage = dm1105_set_voltage; + break; + case DM1105_BOARD_DVBWORLD_2004: + dev->fe = dvb_attach( + cx24116_attach, &serit_sp2633_config, + &dev->i2c_adap); + if (dev->fe) { + dev->fe->ops.set_voltage = dm1105_set_voltage; + break; + } + + dev->fe = dvb_attach( + ds3000_attach, &dvbworld_ds3000_config, + &dev->i2c_adap); + if (dev->fe) { + dvb_attach(ts2020_attach, dev->fe, + &dvbworld_ts2020_config, &dev->i2c_adap); + dev->fe->ops.set_voltage = dm1105_set_voltage; + } + + break; + case DM1105_BOARD_DVBWORLD_2002: + case DM1105_BOARD_AXESS_DM05: + default: + dev->fe = dvb_attach( + stv0299_attach, &sharp_z0194a_config, + &dev->i2c_adap); + if (dev->fe) { + dev->fe->ops.set_voltage = dm1105_set_voltage; + dvb_attach(dvb_pll_attach, dev->fe, 0x60, + &dev->i2c_adap, DVB_PLL_OPERA1); + break; + } + + dev->fe = dvb_attach( + stv0288_attach, &earda_config, + &dev->i2c_adap); + if (dev->fe) { + dev->fe->ops.set_voltage = dm1105_set_voltage; + dvb_attach(stb6000_attach, dev->fe, 0x61, + &dev->i2c_adap); + break; + } + + dev->fe = dvb_attach( + si21xx_attach, &serit_config, + &dev->i2c_adap); + if (dev->fe) + dev->fe->ops.set_voltage = dm1105_set_voltage; + + } + + if (!dev->fe) { + dev_err(&dev->pdev->dev, "could not attach frontend\n"); + return -ENODEV; + } + + ret = dvb_register_frontend(&dev->dvb_adapter, dev->fe); + if (ret < 0) { + if (dev->fe->ops.release) + dev->fe->ops.release(dev->fe); + dev->fe = NULL; + return ret; + } + + return 0; +} + +static void dm1105_read_mac(struct dm1105_dev *dev, u8 *mac) +{ + static u8 command[1] = { 0x28 }; + + struct i2c_msg msg[] = { + { + .addr = IIC_24C01_addr >> 1, + .flags = 0, + .buf = command, + .len = 1 + }, { + .addr = IIC_24C01_addr >> 1, + .flags = I2C_M_RD, + .buf = mac, + .len = 6 + }, + }; + + dm1105_i2c_xfer(&dev->i2c_adap, msg , 2); + dev_info(&dev->pdev->dev, "MAC %pM\n", mac); +} + +static int dm1105_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dm1105_dev *dev; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + int ret = -ENOMEM; + int i; + + dev = kzalloc(sizeof(struct dm1105_dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + /* board config */ + dev->nr = dm1105_devcount; + dev->boardnr = UNSET; + if (card[dev->nr] < ARRAY_SIZE(dm1105_boards)) + dev->boardnr = card[dev->nr]; + for (i = 0; UNSET == dev->boardnr && + i < ARRAY_SIZE(dm1105_subids); i++) + if (pdev->subsystem_vendor == + dm1105_subids[i].subvendor && + pdev->subsystem_device == + dm1105_subids[i].subdevice) + dev->boardnr = dm1105_subids[i].card; + + if (UNSET == dev->boardnr) { + dev->boardnr = DM1105_BOARD_UNKNOWN; + dm1105_card_list(pdev); + } + + dm1105_devcount++; + dev->pdev = pdev; + dev->buffer_size = 5 * DM1105_DMA_BYTES; + dev->PacketErrorCount = 0; + dev->dmarst = 0; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err_kfree; + + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + dev->io_mem = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); + if (!dev->io_mem) { + ret = -EIO; + goto err_pci_release_regions; + } + + spin_lock_init(&dev->lock); + pci_set_drvdata(pdev, dev); + + ret = dm1105_hw_init(dev); + if (ret < 0) + goto err_pci_iounmap; + + /* i2c */ + i2c_set_adapdata(&dev->i2c_adap, dev); + strcpy(dev->i2c_adap.name, DRIVER_NAME); + dev->i2c_adap.owner = THIS_MODULE; + dev->i2c_adap.dev.parent = &pdev->dev; + dev->i2c_adap.algo = &dm1105_algo; + dev->i2c_adap.algo_data = dev; + ret = i2c_add_adapter(&dev->i2c_adap); + + if (ret < 0) + goto err_dm1105_hw_exit; + + i2c_set_adapdata(&dev->i2c_bb_adap, dev); + strcpy(dev->i2c_bb_adap.name, DM1105_I2C_GPIO_NAME); + dev->i2c_bb_adap.owner = THIS_MODULE; + dev->i2c_bb_adap.dev.parent = &pdev->dev; + dev->i2c_bb_adap.algo_data = &dev->i2c_bit; + dev->i2c_bit.data = dev; + dev->i2c_bit.setsda = dm1105_setsda; + dev->i2c_bit.setscl = dm1105_setscl; + dev->i2c_bit.getsda = dm1105_getsda; + dev->i2c_bit.getscl = dm1105_getscl; + dev->i2c_bit.udelay = 10; + dev->i2c_bit.timeout = 10; + + /* Raise SCL and SDA */ + dm1105_setsda(dev, 1); + dm1105_setscl(dev, 1); + + ret = i2c_bit_add_bus(&dev->i2c_bb_adap); + if (ret < 0) + goto err_i2c_del_adapter; + + /* dvb */ + ret = dvb_register_adapter(&dev->dvb_adapter, DRIVER_NAME, + THIS_MODULE, &pdev->dev, adapter_nr); + if (ret < 0) + goto err_i2c_del_adapters; + + dvb_adapter = &dev->dvb_adapter; + + dm1105_read_mac(dev, dvb_adapter->proposed_mac); + + dvbdemux = &dev->demux; + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = dm1105_start_feed; + dvbdemux->stop_feed = dm1105_stop_feed; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + ret = dvb_dmx_init(dvbdemux); + if (ret < 0) + goto err_dvb_unregister_adapter; + + dmx = &dvbdemux->dmx; + dev->dmxdev.filternum = 256; + dev->dmxdev.demux = dmx; + dev->dmxdev.capabilities = 0; + + ret = dvb_dmxdev_init(&dev->dmxdev, dvb_adapter); + if (ret < 0) + goto err_dvb_dmx_release; + + dev->hw_frontend.source = DMX_FRONTEND_0; + + ret = dmx->add_frontend(dmx, &dev->hw_frontend); + if (ret < 0) + goto err_dvb_dmxdev_release; + + dev->mem_frontend.source = DMX_MEMORY_FE; + + ret = dmx->add_frontend(dmx, &dev->mem_frontend); + if (ret < 0) + goto err_remove_hw_frontend; + + ret = dmx->connect_frontend(dmx, &dev->hw_frontend); + if (ret < 0) + goto err_remove_mem_frontend; + + ret = dvb_net_init(dvb_adapter, &dev->dvbnet, dmx); + if (ret < 0) + goto err_disconnect_frontend; + + ret = frontend_init(dev); + if (ret < 0) + goto err_dvb_net; + + dm1105_ir_init(dev); + + INIT_WORK(&dev->work, dm1105_dmx_buffer); + sprintf(dev->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num); + dev->wq = create_singlethread_workqueue(dev->wqn); + if (!dev->wq) { + ret = -ENOMEM; + goto err_dvb_net; + } + + ret = request_irq(pdev->irq, dm1105_irq, IRQF_SHARED, + DRIVER_NAME, dev); + if (ret < 0) + goto err_workqueue; + + return 0; + +err_workqueue: + destroy_workqueue(dev->wq); +err_dvb_net: + dvb_net_release(&dev->dvbnet); +err_disconnect_frontend: + dmx->disconnect_frontend(dmx); +err_remove_mem_frontend: + dmx->remove_frontend(dmx, &dev->mem_frontend); +err_remove_hw_frontend: + dmx->remove_frontend(dmx, &dev->hw_frontend); +err_dvb_dmxdev_release: + dvb_dmxdev_release(&dev->dmxdev); +err_dvb_dmx_release: + dvb_dmx_release(dvbdemux); +err_dvb_unregister_adapter: + dvb_unregister_adapter(dvb_adapter); +err_i2c_del_adapters: + i2c_del_adapter(&dev->i2c_bb_adap); +err_i2c_del_adapter: + i2c_del_adapter(&dev->i2c_adap); +err_dm1105_hw_exit: + dm1105_hw_exit(dev); +err_pci_iounmap: + pci_iounmap(pdev, dev->io_mem); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(dev); + return ret; +} + +static void dm1105_remove(struct pci_dev *pdev) +{ + struct dm1105_dev *dev = pci_get_drvdata(pdev); + struct dvb_adapter *dvb_adapter = &dev->dvb_adapter; + struct dvb_demux *dvbdemux = &dev->demux; + struct dmx_demux *dmx = &dvbdemux->dmx; + + dm1105_ir_exit(dev); + dmx->close(dmx); + dvb_net_release(&dev->dvbnet); + if (dev->fe) + dvb_unregister_frontend(dev->fe); + + dmx->disconnect_frontend(dmx); + dmx->remove_frontend(dmx, &dev->mem_frontend); + dmx->remove_frontend(dmx, &dev->hw_frontend); + dvb_dmxdev_release(&dev->dmxdev); + dvb_dmx_release(dvbdemux); + dvb_unregister_adapter(dvb_adapter); + if (&dev->i2c_adap) + i2c_del_adapter(&dev->i2c_adap); + + dm1105_hw_exit(dev); + synchronize_irq(pdev->irq); + free_irq(pdev->irq, dev); + pci_iounmap(pdev, dev->io_mem); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + dm1105_devcount--; + kfree(dev); +} + +static struct pci_device_id dm1105_id_table[] = { + { + .vendor = PCI_VENDOR_ID_TRIGEM, + .device = PCI_DEVICE_ID_DM1105, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + .vendor = PCI_VENDOR_ID_AXESS, + .device = PCI_DEVICE_ID_DM05, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* empty */ + }, +}; + +MODULE_DEVICE_TABLE(pci, dm1105_id_table); + +static struct pci_driver dm1105_driver = { + .name = DRIVER_NAME, + .id_table = dm1105_id_table, + .probe = dm1105_probe, + .remove = dm1105_remove, +}; + +static int __init dm1105_init(void) +{ + return pci_register_driver(&dm1105_driver); +} + +static void __exit dm1105_exit(void) +{ + pci_unregister_driver(&dm1105_driver); +} + +module_init(dm1105_init); +module_exit(dm1105_exit); + +MODULE_AUTHOR("Igor M. Liplianin "); +MODULE_DESCRIPTION("SDMC DM1105 DVB driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/ivtv/Kconfig b/drivers/media/pci/ivtv/Kconfig new file mode 100644 index 00000000..dd6ee57e --- /dev/null +++ b/drivers/media/pci/ivtv/Kconfig @@ -0,0 +1,61 @@ +config VIDEO_IVTV + tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" + depends on VIDEO_V4L2 && PCI && I2C + select I2C_ALGOBIT + depends on RC_CORE + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_CX2341X + select VIDEO_CX25840 + select VIDEO_MSP3400 + select VIDEO_SAA711X + select VIDEO_SAA717X + select VIDEO_SAA7127 + select VIDEO_CS53L32A + select VIDEO_M52790 + select VIDEO_WM8775 + select VIDEO_WM8739 + select VIDEO_VP27SMPX + select VIDEO_UPD64031A + select VIDEO_UPD64083 + ---help--- + This is a video4linux driver for Conexant cx23416 or cx23415 based + PCI personal video recorder devices. + + This is used in devices such as the Hauppauge PVR-150/250/350/500 + cards. There is a driver homepage at . + + To compile this driver as a module, choose M here: the + module will be called ivtv. + +config VIDEO_IVTV_ALSA + tristate "Conexant cx23415/cx23416 ALSA interface for PCM audio capture" + depends on VIDEO_IVTV && SND + select SND_PCM + ---help--- + This driver provides an ALSA interface as another method for user + applications to obtain PCM audio data from Conexant cx23415/cx23416 + based PCI TV cards supported by the ivtv driver. + + The ALSA interface has much wider use in user applications performing + PCM audio capture, than the V4L2 "/dev/video24" PCM audio interface + provided by the main ivtv driver. + + To compile this driver as a module, choose M here: the + module will be called ivtv-alsa. + +config VIDEO_FB_IVTV + tristate "Conexant cx23415 framebuffer support" + depends on VIDEO_IVTV && FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + This is a framebuffer driver for the Conexant cx23415 MPEG + encoder/decoder. + + This is used in the Hauppauge PVR-350 card. There is a driver + homepage at . + + To compile this driver as a module, choose M here: the + module will be called ivtvfb. diff --git a/drivers/media/pci/ivtv/Makefile b/drivers/media/pci/ivtv/Makefile new file mode 100644 index 00000000..0eaa8829 --- /dev/null +++ b/drivers/media/pci/ivtv/Makefile @@ -0,0 +1,16 @@ +ivtv-objs := ivtv-routing.o ivtv-cards.o ivtv-controls.o \ + ivtv-driver.o ivtv-fileops.o ivtv-firmware.o \ + ivtv-gpio.o ivtv-i2c.o ivtv-ioctl.o ivtv-irq.o \ + ivtv-mailbox.o ivtv-queue.o ivtv-streams.o ivtv-udma.o \ + ivtv-vbi.o ivtv-yuv.o +ivtv-alsa-objs := ivtv-alsa-main.o ivtv-alsa-pcm.o + +obj-$(CONFIG_VIDEO_IVTV) += ivtv.o +obj-$(CONFIG_VIDEO_IVTV_ALSA) += ivtv-alsa.o +obj-$(CONFIG_VIDEO_FB_IVTV) += ivtvfb.o + +ccflags-y += -I$(srctree)/drivers/media/i2c +ccflags-y += -I$(srctree)/drivers/media/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends + diff --git a/drivers/media/pci/ivtv/ivtv-alsa-main.c b/drivers/media/pci/ivtv/ivtv-alsa-main.c new file mode 100644 index 00000000..e970cfac --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-main.c @@ -0,0 +1,303 @@ +/* + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * Copyright (C) 2009 Devin Heitmueller + * + * Portions of this work were sponsored by ONELAN Limited for the cx18 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "ivtv-driver.h" +#include "ivtv-version.h" +#include "ivtv-alsa.h" +#include "ivtv-alsa-mixer.h" +#include "ivtv-alsa-pcm.h" + +int ivtv_alsa_debug; + +#define IVTV_DEBUG_ALSA_INFO(fmt, arg...) \ + do { \ + if (ivtv_alsa_debug & 2) \ + pr_info("%s: " fmt, "ivtv-alsa", ## arg); \ + } while (0) + +module_param_named(debug, ivtv_alsa_debug, int, 0644); +MODULE_PARM_DESC(debug, + "Debug level (bitmask). Default: 0\n" + "\t\t\t 1/0x0001: warning\n" + "\t\t\t 2/0x0002: info\n"); + +MODULE_AUTHOR("Andy Walls"); +MODULE_DESCRIPTION("CX23415/CX23416 ALSA Interface"); +MODULE_SUPPORTED_DEVICE("CX23415/CX23416 MPEG2 encoder"); +MODULE_LICENSE("GPL"); + +MODULE_VERSION(IVTV_VERSION); + +static inline +struct snd_ivtv_card *to_snd_ivtv_card(struct v4l2_device *v4l2_dev) +{ + return to_ivtv(v4l2_dev)->alsa; +} + +static inline +struct snd_ivtv_card *p_to_snd_ivtv_card(struct v4l2_device **v4l2_dev) +{ + return container_of(v4l2_dev, struct snd_ivtv_card, v4l2_dev); +} + +static void snd_ivtv_card_free(struct snd_ivtv_card *itvsc) +{ + if (itvsc == NULL) + return; + + if (itvsc->v4l2_dev != NULL) + to_ivtv(itvsc->v4l2_dev)->alsa = NULL; + + /* FIXME - take any other stopping actions needed */ + + kfree(itvsc); +} + +static void snd_ivtv_card_private_free(struct snd_card *sc) +{ + if (sc == NULL) + return; + snd_ivtv_card_free(sc->private_data); + sc->private_data = NULL; + sc->private_free = NULL; +} + +static int snd_ivtv_card_create(struct v4l2_device *v4l2_dev, + struct snd_card *sc, + struct snd_ivtv_card **itvsc) +{ + *itvsc = kzalloc(sizeof(struct snd_ivtv_card), GFP_KERNEL); + if (*itvsc == NULL) + return -ENOMEM; + + (*itvsc)->v4l2_dev = v4l2_dev; + (*itvsc)->sc = sc; + + sc->private_data = *itvsc; + sc->private_free = snd_ivtv_card_private_free; + + return 0; +} + +static int snd_ivtv_card_set_names(struct snd_ivtv_card *itvsc) +{ + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + struct snd_card *sc = itvsc->sc; + + /* sc->driver is used by alsa-lib's configurator: simple, unique */ + strlcpy(sc->driver, "CX2341[56]", sizeof(sc->driver)); + + /* sc->shortname is a symlink in /proc/asound: IVTV-M -> cardN */ + snprintf(sc->shortname, sizeof(sc->shortname), "IVTV-%d", + itv->instance); + + /* sc->longname is read from /proc/asound/cards */ + snprintf(sc->longname, sizeof(sc->longname), + "CX2341[56] #%d %s TV/FM Radio/Line-In Capture", + itv->instance, itv->card_name); + + return 0; +} + +static int snd_ivtv_init(struct v4l2_device *v4l2_dev) +{ + struct ivtv *itv = to_ivtv(v4l2_dev); + struct snd_card *sc = NULL; + struct snd_ivtv_card *itvsc; + int ret; + + /* Numbrs steps from "Writing an ALSA Driver" by Takashi Iwai */ + + /* (1) Check and increment the device index */ + /* This is a no-op for us. We'll use the itv->instance */ + + /* (2) Create a card instance */ + ret = snd_card_create(SNDRV_DEFAULT_IDX1, /* use first available id */ + SNDRV_DEFAULT_STR1, /* xid from end of shortname*/ + THIS_MODULE, 0, &sc); + if (ret) { + IVTV_ALSA_ERR("%s: snd_card_create() failed with err %d\n", + __func__, ret); + goto err_exit; + } + + /* (3) Create a main component */ + ret = snd_ivtv_card_create(v4l2_dev, sc, &itvsc); + if (ret) { + IVTV_ALSA_ERR("%s: snd_ivtv_card_create() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + + /* (4) Set the driver ID and name strings */ + snd_ivtv_card_set_names(itvsc); + + /* (5) Create other components: mixer, PCM, & proc files */ +#if 0 + ret = snd_ivtv_mixer_create(itvsc); + if (ret) { + IVTV_ALSA_WARN("%s: snd_ivtv_mixer_create() failed with err %d:" + " proceeding anyway\n", __func__, ret); + } +#endif + + ret = snd_ivtv_pcm_create(itvsc); + if (ret) { + IVTV_ALSA_ERR("%s: snd_ivtv_pcm_create() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + /* FIXME - proc files */ + + /* (7) Set the driver data and return 0 */ + /* We do this out of normal order for PCI drivers to avoid races */ + itv->alsa = itvsc; + + /* (6) Register the card instance */ + ret = snd_card_register(sc); + if (ret) { + itv->alsa = NULL; + IVTV_ALSA_ERR("%s: snd_card_register() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + + return 0; + +err_exit_free: + if (sc != NULL) + snd_card_free(sc); + kfree(itvsc); +err_exit: + return ret; +} + +static int ivtv_alsa_load(struct ivtv *itv) +{ + struct v4l2_device *v4l2_dev = &itv->v4l2_dev; + struct ivtv_stream *s; + + if (v4l2_dev == NULL) { + pr_err("ivtv-alsa: %s: struct v4l2_device * is NULL\n", + __func__); + return 0; + } + + itv = to_ivtv(v4l2_dev); + if (itv == NULL) { + pr_err("ivtv-alsa itv is NULL\n"); + return 0; + } + + s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; + if (s->vdev == NULL) { + IVTV_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - " + "skipping\n", __func__); + return 0; + } + + if (itv->alsa != NULL) { + IVTV_ALSA_ERR("%s: struct snd_ivtv_card * already exists\n", + __func__); + return 0; + } + + if (snd_ivtv_init(v4l2_dev)) { + IVTV_ALSA_ERR("%s: failed to create struct snd_ivtv_card\n", + __func__); + } else { + IVTV_DEBUG_ALSA_INFO("%s: created ivtv ALSA interface instance " + "\n", __func__); + } + return 0; +} + +static int __init ivtv_alsa_init(void) +{ + pr_info("ivtv-alsa: module loading...\n"); + ivtv_ext_init = &ivtv_alsa_load; + return 0; +} + +static void __exit snd_ivtv_exit(struct snd_ivtv_card *itvsc) +{ + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + + /* FIXME - pointer checks & shutdown itvsc */ + + snd_card_free(itvsc->sc); + itv->alsa = NULL; +} + +static int __exit ivtv_alsa_exit_callback(struct device *dev, void *data) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + struct snd_ivtv_card *itvsc; + + if (v4l2_dev == NULL) { + pr_err("ivtv-alsa: %s: struct v4l2_device * is NULL\n", + __func__); + return 0; + } + + itvsc = to_snd_ivtv_card(v4l2_dev); + if (itvsc == NULL) { + IVTV_ALSA_WARN("%s: struct snd_ivtv_card * is NULL\n", + __func__); + return 0; + } + + snd_ivtv_exit(itvsc); + return 0; +} + +static void __exit ivtv_alsa_exit(void) +{ + struct device_driver *drv; + int ret; + + pr_info("ivtv-alsa: module unloading...\n"); + + drv = driver_find("ivtv", &pci_bus_type); + ret = driver_for_each_device(drv, NULL, NULL, ivtv_alsa_exit_callback); + (void)ret; /* suppress compiler warning */ + + ivtv_ext_init = NULL; + pr_info("ivtv-alsa: module unload complete\n"); +} + +module_init(ivtv_alsa_init); +module_exit(ivtv_alsa_exit); diff --git a/drivers/media/pci/ivtv/ivtv-alsa-mixer.c b/drivers/media/pci/ivtv/ivtv-alsa-mixer.c new file mode 100644 index 00000000..33ec05b0 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-mixer.c @@ -0,0 +1,175 @@ +/* + * ALSA mixer controls for the + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include "ivtv-alsa.h" +#include "ivtv-driver.h" + +/* + * Note the cx25840-core volume scale is funny, due to the alignment of the + * scale with another chip's range: + * + * v4l2_control value /512 indicated dB actual dB reg 0x8d4 + * 0x0000 - 0x01ff 0 -119 -96 228 + * 0x0200 - 0x02ff 1 -118 -96 228 + * ... + * 0x2c00 - 0x2dff 22 -97 -96 228 + * 0x2e00 - 0x2fff 23 -96 -96 228 + * 0x3000 - 0x31ff 24 -95 -95 226 + * ... + * 0xee00 - 0xefff 119 0 0 36 + * ... + * 0xfe00 - 0xffff 127 +8 +8 20 + */ +static inline int dB_to_cx25840_vol(int dB) +{ + if (dB < -96) + dB = -96; + else if (dB > 8) + dB = 8; + return (dB + 119) << 9; +} + +static inline int cx25840_vol_to_dB(int v) +{ + if (v < (23 << 9)) + v = (23 << 9); + else if (v > (127 << 9)) + v = (127 << 9); + return (v >> 9) - 119; +} + +static int snd_ivtv_mixer_tv_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + /* We're already translating values, just keep this control in dB */ + uinfo->value.integer.min = -96; + uinfo->value.integer.max = 8; + uinfo->value.integer.step = 1; + return 0; +} + +static int snd_ivtv_mixer_tv_vol_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *uctl) +{ + struct snd_ivtv_card *itvsc = snd_kcontrol_chip(kctl); + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + struct v4l2_control vctrl; + int ret; + + vctrl.id = V4L2_CID_AUDIO_VOLUME; + vctrl.value = dB_to_cx25840_vol(uctl->value.integer.value[0]); + + snd_ivtv_lock(itvsc); + ret = v4l2_subdev_call(itv->sd_audio, core, g_ctrl, &vctrl); + snd_ivtv_unlock(itvsc); + + if (!ret) + uctl->value.integer.value[0] = cx25840_vol_to_dB(vctrl.value); + return ret; +} + +static int snd_ivtv_mixer_tv_vol_put(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *uctl) +{ + struct snd_ivtv_card *itvsc = snd_kcontrol_chip(kctl); + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + struct v4l2_control vctrl; + int ret; + + vctrl.id = V4L2_CID_AUDIO_VOLUME; + vctrl.value = dB_to_cx25840_vol(uctl->value.integer.value[0]); + + snd_ivtv_lock(itvsc); + + /* Fetch current state */ + ret = v4l2_subdev_call(itv->sd_audio, core, g_ctrl, &vctrl); + + if (ret || + (cx25840_vol_to_dB(vctrl.value) != uctl->value.integer.value[0])) { + + /* Set, if needed */ + vctrl.value = dB_to_cx25840_vol(uctl->value.integer.value[0]); + ret = v4l2_subdev_call(itv->sd_audio, core, s_ctrl, &vctrl); + if (!ret) + ret = 1; /* Indicate control was changed w/o error */ + } + snd_ivtv_unlock(itvsc); + + return ret; +} + + +/* This is a bit of overkill, the slider is already in dB internally */ +static DECLARE_TLV_DB_SCALE(snd_ivtv_mixer_tv_vol_db_scale, -9600, 100, 0); + +static struct snd_kcontrol_new snd_ivtv_mixer_tv_vol __initdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog TV Capture Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = snd_ivtv_mixer_tv_volume_info, + .get = snd_ivtv_mixer_tv_volume_get, + .put = snd_ivtv_mixer_tv_volume_put, + .tlv.p = snd_ivtv_mixer_tv_vol_db_scale +}; + +/* FIXME - add mute switch and balance, bass, treble sliders: + V4L2_CID_AUDIO_MUTE + + V4L2_CID_AUDIO_BALANCE + + V4L2_CID_AUDIO_BASS + V4L2_CID_AUDIO_TREBLE +*/ + +/* FIXME - add stereo, lang1, lang2, mono menu */ +/* FIXME - add I2S volume */ + +int __init snd_ivtv_mixer_create(struct snd_ivtv_card *itvsc) +{ + struct v4l2_device *v4l2_dev = itvsc->v4l2_dev; + struct snd_card *sc = itvsc->sc; + int ret; + + strlcpy(sc->mixername, "CX2341[56] Mixer", sizeof(sc->mixername)); + + ret = snd_ctl_add(sc, snd_ctl_new1(snd_ivtv_mixer_tv_vol, itvsc)); + if (ret) { + IVTV_ALSA_WARN("%s: failed to add %s control, err %d\n", + __func__, snd_ivtv_mixer_tv_vol.name, ret); + } + return ret; +} diff --git a/drivers/media/pci/ivtv/ivtv-alsa-mixer.h b/drivers/media/pci/ivtv/ivtv-alsa-mixer.h new file mode 100644 index 00000000..cdde3670 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-mixer.h @@ -0,0 +1,23 @@ +/* + * ALSA mixer controls for the + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int __init snd_ivtv_mixer_create(struct snd_ivtv_card *itvsc); diff --git a/drivers/media/pci/ivtv/ivtv-alsa-pcm.c b/drivers/media/pci/ivtv/ivtv-alsa-pcm.c new file mode 100644 index 00000000..7a9b98bc --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-pcm.c @@ -0,0 +1,364 @@ +/* + * ALSA PCM device for the + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * Copyright (C) 2009 Devin Heitmueller + * + * Portions of this work were sponsored by ONELAN Limited for the cx18 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include + +#include + +#include +#include + +#include "ivtv-driver.h" +#include "ivtv-queue.h" +#include "ivtv-streams.h" +#include "ivtv-fileops.h" +#include "ivtv-alsa.h" +#include "ivtv-alsa-pcm.h" + +static unsigned int pcm_debug; +module_param(pcm_debug, int, 0644); +MODULE_PARM_DESC(pcm_debug, "enable debug messages for pcm"); + +#define dprintk(fmt, arg...) \ + do { \ + if (pcm_debug) \ + pr_info("ivtv-alsa-pcm %s: " fmt, __func__, ##arg); \ + } while (0) + +static struct snd_pcm_hardware snd_ivtv_hw_capture = { + .info = SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP_VALID, + + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_48000, + + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */ + .period_bytes_min = 64, /* 12544/2, */ + .period_bytes_max = 12544, + .periods_min = 2, + .periods_max = 98, /* 12544, */ +}; + +static void ivtv_alsa_announce_pcm_data(struct snd_ivtv_card *itvsc, + u8 *pcm_data, + size_t num_bytes) +{ + struct snd_pcm_substream *substream; + struct snd_pcm_runtime *runtime; + unsigned int oldptr; + unsigned int stride; + int period_elapsed = 0; + int length; + + dprintk("ivtv alsa announce ptr=%p data=%p num_bytes=%zd\n", itvsc, + pcm_data, num_bytes); + + substream = itvsc->capture_pcm_substream; + if (substream == NULL) { + dprintk("substream was NULL\n"); + return; + } + + runtime = substream->runtime; + if (runtime == NULL) { + dprintk("runtime was NULL\n"); + return; + } + + stride = runtime->frame_bits >> 3; + if (stride == 0) { + dprintk("stride is zero\n"); + return; + } + + length = num_bytes / stride; + if (length == 0) { + dprintk("%s: length was zero\n", __func__); + return; + } + + if (runtime->dma_area == NULL) { + dprintk("dma area was NULL - ignoring\n"); + return; + } + + oldptr = itvsc->hwptr_done_capture; + if (oldptr + length >= runtime->buffer_size) { + unsigned int cnt = + runtime->buffer_size - oldptr; + memcpy(runtime->dma_area + oldptr * stride, pcm_data, + cnt * stride); + memcpy(runtime->dma_area, pcm_data + cnt * stride, + length * stride - cnt * stride); + } else { + memcpy(runtime->dma_area + oldptr * stride, pcm_data, + length * stride); + } + snd_pcm_stream_lock(substream); + + itvsc->hwptr_done_capture += length; + if (itvsc->hwptr_done_capture >= + runtime->buffer_size) + itvsc->hwptr_done_capture -= + runtime->buffer_size; + + itvsc->capture_transfer_done += length; + if (itvsc->capture_transfer_done >= + runtime->period_size) { + itvsc->capture_transfer_done -= + runtime->period_size; + period_elapsed = 1; + } + + snd_pcm_stream_unlock(substream); + + if (period_elapsed) + snd_pcm_period_elapsed(substream); +} + +static int snd_ivtv_pcm_capture_open(struct snd_pcm_substream *substream) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct v4l2_device *v4l2_dev = itvsc->v4l2_dev; + struct ivtv *itv = to_ivtv(v4l2_dev); + struct ivtv_stream *s; + struct ivtv_open_id item; + int ret; + + /* Instruct the CX2341[56] to start sending packets */ + snd_ivtv_lock(itvsc); + + if (ivtv_init_on_first_open(itv)) { + snd_ivtv_unlock(itvsc); + return -ENXIO; + } + + s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; + + v4l2_fh_init(&item.fh, s->vdev); + item.itv = itv; + item.type = s->type; + + /* See if the stream is available */ + if (ivtv_claim_stream(&item, item.type)) { + /* No, it's already in use */ + snd_ivtv_unlock(itvsc); + return -EBUSY; + } + + if (test_bit(IVTV_F_S_STREAMOFF, &s->s_flags) || + test_and_set_bit(IVTV_F_S_STREAMING, &s->s_flags)) { + /* We're already streaming. No additional action required */ + snd_ivtv_unlock(itvsc); + return 0; + } + + + runtime->hw = snd_ivtv_hw_capture; + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); + itvsc->capture_pcm_substream = substream; + runtime->private_data = itv; + + itv->pcm_announce_callback = ivtv_alsa_announce_pcm_data; + + /* Not currently streaming, so start it up */ + set_bit(IVTV_F_S_STREAMING, &s->s_flags); + ret = ivtv_start_v4l2_encode_stream(s); + snd_ivtv_unlock(itvsc); + + return ret; +} + +static int snd_ivtv_pcm_capture_close(struct snd_pcm_substream *substream) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + struct v4l2_device *v4l2_dev = itvsc->v4l2_dev; + struct ivtv *itv = to_ivtv(v4l2_dev); + struct ivtv_stream *s; + + /* Instruct the ivtv to stop sending packets */ + snd_ivtv_lock(itvsc); + s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; + ivtv_stop_v4l2_encode_stream(s, 0); + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + + ivtv_release_stream(s); + + itv->pcm_announce_callback = NULL; + snd_ivtv_unlock(itvsc); + + return 0; +} + +static int snd_ivtv_pcm_ioctl(struct snd_pcm_substream *substream, + unsigned int cmd, void *arg) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + int ret; + + snd_ivtv_lock(itvsc); + ret = snd_pcm_lib_ioctl(substream, cmd, arg); + snd_ivtv_unlock(itvsc); + return ret; +} + + +static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, + size_t size) +{ + struct snd_pcm_runtime *runtime = subs->runtime; + + dprintk("Allocating vbuffer\n"); + if (runtime->dma_area) { + if (runtime->dma_bytes > size) + return 0; + + vfree(runtime->dma_area); + } + runtime->dma_area = vmalloc(size); + if (!runtime->dma_area) + return -ENOMEM; + + runtime->dma_bytes = size; + + return 0; +} + +static int snd_ivtv_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + dprintk("%s called\n", __func__); + + return snd_pcm_alloc_vmalloc_buffer(substream, + params_buffer_bytes(params)); +} + +static int snd_ivtv_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + unsigned long flags; + + spin_lock_irqsave(&itvsc->slock, flags); + if (substream->runtime->dma_area) { + dprintk("freeing pcm capture region\n"); + vfree(substream->runtime->dma_area); + substream->runtime->dma_area = NULL; + } + spin_unlock_irqrestore(&itvsc->slock, flags); + + return 0; +} + +static int snd_ivtv_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + + itvsc->hwptr_done_capture = 0; + itvsc->capture_transfer_done = 0; + + return 0; +} + +static int snd_ivtv_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + return 0; +} + +static +snd_pcm_uframes_t snd_ivtv_pcm_pointer(struct snd_pcm_substream *substream) +{ + unsigned long flags; + snd_pcm_uframes_t hwptr_done; + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + + spin_lock_irqsave(&itvsc->slock, flags); + hwptr_done = itvsc->hwptr_done_capture; + spin_unlock_irqrestore(&itvsc->slock, flags); + + return hwptr_done; +} + +static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs, + unsigned long offset) +{ + void *pageptr = subs->runtime->dma_area + offset; + + return vmalloc_to_page(pageptr); +} + +static struct snd_pcm_ops snd_ivtv_pcm_capture_ops = { + .open = snd_ivtv_pcm_capture_open, + .close = snd_ivtv_pcm_capture_close, + .ioctl = snd_ivtv_pcm_ioctl, + .hw_params = snd_ivtv_pcm_hw_params, + .hw_free = snd_ivtv_pcm_hw_free, + .prepare = snd_ivtv_pcm_prepare, + .trigger = snd_ivtv_pcm_trigger, + .pointer = snd_ivtv_pcm_pointer, + .page = snd_pcm_get_vmalloc_page, +}; + +int snd_ivtv_pcm_create(struct snd_ivtv_card *itvsc) +{ + struct snd_pcm *sp; + struct snd_card *sc = itvsc->sc; + struct v4l2_device *v4l2_dev = itvsc->v4l2_dev; + struct ivtv *itv = to_ivtv(v4l2_dev); + int ret; + + ret = snd_pcm_new(sc, "CX2341[56] PCM", + 0, /* PCM device 0, the only one for this card */ + 0, /* 0 playback substreams */ + 1, /* 1 capture substream */ + &sp); + if (ret) { + IVTV_ALSA_ERR("%s: snd_ivtv_pcm_create() failed with err %d\n", + __func__, ret); + goto err_exit; + } + + spin_lock_init(&itvsc->slock); + + snd_pcm_set_ops(sp, SNDRV_PCM_STREAM_CAPTURE, + &snd_ivtv_pcm_capture_ops); + sp->info_flags = 0; + sp->private_data = itvsc; + strlcpy(sp->name, itv->card_name, sizeof(sp->name)); + + return 0; + +err_exit: + return ret; +} diff --git a/drivers/media/pci/ivtv/ivtv-alsa-pcm.h b/drivers/media/pci/ivtv/ivtv-alsa-pcm.h new file mode 100644 index 00000000..186814e0 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-pcm.h @@ -0,0 +1,23 @@ +/* + * ALSA PCM device for the + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int snd_ivtv_pcm_create(struct snd_ivtv_card *itvsc); diff --git a/drivers/media/pci/ivtv/ivtv-alsa.h b/drivers/media/pci/ivtv/ivtv-alsa.h new file mode 100644 index 00000000..4a0d8f2c --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa.h @@ -0,0 +1,75 @@ +/* + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * Copyright (C) 2009 Devin Heitmueller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +struct snd_card; + +struct snd_ivtv_card { + struct v4l2_device *v4l2_dev; + struct snd_card *sc; + unsigned int capture_transfer_done; + unsigned int hwptr_done_capture; + struct snd_pcm_substream *capture_pcm_substream; + spinlock_t slock; +}; + +extern int ivtv_alsa_debug; + +/* + * File operations that manipulate the encoder or video or audio subdevices + * need to be serialized. Use the same lock we use for v4l2 file ops. + */ +static inline void snd_ivtv_lock(struct snd_ivtv_card *itvsc) +{ + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + mutex_lock(&itv->serialize_lock); +} + +static inline void snd_ivtv_unlock(struct snd_ivtv_card *itvsc) +{ + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + mutex_unlock(&itv->serialize_lock); +} + +#define IVTV_ALSA_DBGFLG_WARN (1 << 0) +#define IVTV_ALSA_DBGFLG_INFO (1 << 1) + +#define IVTV_ALSA_DEBUG(x, type, fmt, args...) \ + do { \ + if ((x) & ivtv_alsa_debug) \ + pr_info("%s-alsa: " type ": " fmt, \ + v4l2_dev->name , ## args); \ + } while (0) + +#define IVTV_ALSA_DEBUG_WARN(fmt, args...) \ + IVTV_ALSA_DEBUG(IVTV_ALSA_DBGFLG_WARN, "warning", fmt , ## args) + +#define IVTV_ALSA_DEBUG_INFO(fmt, args...) \ + IVTV_ALSA_DEBUG(IVTV_ALSA_DBGFLG_INFO, "info", fmt , ## args) + +#define IVTV_ALSA_ERR(fmt, args...) \ + pr_err("%s-alsa: " fmt, v4l2_dev->name , ## args) + +#define IVTV_ALSA_WARN(fmt, args...) \ + pr_warn("%s-alsa: " fmt, v4l2_dev->name , ## args) + +#define IVTV_ALSA_INFO(fmt, args...) \ + pr_info("%s-alsa: " fmt, v4l2_dev->name , ## args) diff --git a/drivers/media/pci/ivtv/ivtv-cards.c b/drivers/media/pci/ivtv/ivtv-cards.c new file mode 100644 index 00000000..145e4749 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-cards.c @@ -0,0 +1,1370 @@ +/* + Functions to query card hardware + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-cards.h" +#include "ivtv-i2c.h" + +#include +#include +#include +#include +#include +#include + +#define MSP_TUNER MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, \ + MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER) +#define MSP_SCART1 MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, \ + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART) +#define MSP_SCART2 MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, \ + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART) +#define MSP_SCART3 MSP_INPUT(MSP_IN_SCART3, MSP_IN_TUNER1, \ + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART) +#define MSP_MONO MSP_INPUT(MSP_IN_MONO, MSP_IN_TUNER1, \ + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART) + +#define V4L2_STD_PAL_SECAM (V4L2_STD_PAL|V4L2_STD_SECAM) + +/* usual i2c tuner addresses to probe */ +static struct ivtv_card_tuner_i2c ivtv_i2c_std = { + .radio = { I2C_CLIENT_END }, + .demod = { 0x43, I2C_CLIENT_END }, + .tv = { 0x61, 0x60, I2C_CLIENT_END }, +}; + +/* as above, but with possible radio tuner */ +static struct ivtv_card_tuner_i2c ivtv_i2c_radio = { + .radio = { 0x60, I2C_CLIENT_END }, + .demod = { 0x43, I2C_CLIENT_END }, + .tv = { 0x61, I2C_CLIENT_END }, +}; + +/* using the tda8290+75a combo */ +static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = { + .radio = { I2C_CLIENT_END }, + .demod = { I2C_CLIENT_END }, + .tv = { 0x4b, I2C_CLIENT_END }, +}; + +/********************** card configuration *******************************/ + +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ + This keeps the PCI ID database up to date. Note that the entries + must be added under vendor 0x4444 (Conexant) as subsystem IDs. + New vendor IDs should still be added to the vendor ID list. */ + +/* Hauppauge PVR-250 cards */ + +/* Note: for Hauppauge cards the tveeprom information is used instead of PCI IDs */ +static const struct ivtv_card ivtv_card_pvr250 = { + .type = IVTV_CARD_PVR_250, + .name = "Hauppauge WinTV PVR-250", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115, + .hw_audio = IVTV_HW_MSP34XX, + .hw_audio_ctrl = IVTV_HW_MSP34XX, + .hw_all = IVTV_HW_MSP34XX | IVTV_HW_SAA7115 | + IVTV_HW_TVEEPROM | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE0 }, + { IVTV_CARD_INPUT_SVIDEO2, 2, IVTV_SAA71XX_SVIDEO1 }, + { IVTV_CARD_INPUT_COMPOSITE2, 2, IVTV_SAA71XX_COMPOSITE1 }, + { IVTV_CARD_INPUT_COMPOSITE3, 1, IVTV_SAA71XX_COMPOSITE5 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, MSP_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, MSP_SCART1 }, + { IVTV_CARD_INPUT_LINE_IN2, MSP_SCART3 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, MSP_SCART2 }, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Hauppauge PVR-350 cards */ + +/* Outputs for Hauppauge PVR350 cards */ +static struct ivtv_card_output ivtv_pvr350_outputs[] = { + { + .name = "S-Video + Composite", + .video_output = 0, + }, { + .name = "Composite", + .video_output = 1, + }, { + .name = "S-Video", + .video_output = 2, + }, { + .name = "RGB", + .video_output = 3, + }, { + .name = "YUV C", + .video_output = 4, + }, { + .name = "YUV V", + .video_output = 5, + } +}; + +static const struct ivtv_card ivtv_card_pvr350 = { + .type = IVTV_CARD_PVR_350, + .name = "Hauppauge WinTV PVR-350", + .v4l2_capabilities = IVTV_CAP_ENCODER | IVTV_CAP_DECODER, + .video_outputs = ivtv_pvr350_outputs, + .nof_outputs = ARRAY_SIZE(ivtv_pvr350_outputs), + .hw_video = IVTV_HW_SAA7115, + .hw_audio = IVTV_HW_MSP34XX, + .hw_audio_ctrl = IVTV_HW_MSP34XX, + .hw_all = IVTV_HW_MSP34XX | IVTV_HW_SAA7115 | + IVTV_HW_SAA7127 | IVTV_HW_TVEEPROM | IVTV_HW_TUNER | + IVTV_HW_I2C_IR_RX_HAUP_EXT | IVTV_HW_I2C_IR_RX_HAUP_INT, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE0 }, + { IVTV_CARD_INPUT_SVIDEO2, 2, IVTV_SAA71XX_SVIDEO1 }, + { IVTV_CARD_INPUT_COMPOSITE2, 2, IVTV_SAA71XX_COMPOSITE1 }, + { IVTV_CARD_INPUT_COMPOSITE3, 1, IVTV_SAA71XX_COMPOSITE5 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, MSP_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, MSP_SCART1 }, + { IVTV_CARD_INPUT_LINE_IN2, MSP_SCART3 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, MSP_SCART2 }, + .i2c = &ivtv_i2c_std, +}; + +/* PVR-350 V1 boards have a different audio tuner input and use a + saa7114 instead of a saa7115. + Note that the info below comes from a pre-production model so it may + not be correct. Especially the audio behaves strangely (mono only it seems) */ +static const struct ivtv_card ivtv_card_pvr350_v1 = { + .type = IVTV_CARD_PVR_350_V1, + .name = "Hauppauge WinTV PVR-350 (V1)", + .v4l2_capabilities = IVTV_CAP_ENCODER | IVTV_CAP_DECODER, + .video_outputs = ivtv_pvr350_outputs, + .nof_outputs = ARRAY_SIZE(ivtv_pvr350_outputs), + .hw_video = IVTV_HW_SAA7114, + .hw_audio = IVTV_HW_MSP34XX, + .hw_audio_ctrl = IVTV_HW_MSP34XX, + .hw_all = IVTV_HW_MSP34XX | IVTV_HW_SAA7114 | + IVTV_HW_SAA7127 | IVTV_HW_TVEEPROM | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE0 }, + { IVTV_CARD_INPUT_SVIDEO2, 2, IVTV_SAA71XX_SVIDEO1 }, + { IVTV_CARD_INPUT_COMPOSITE2, 2, IVTV_SAA71XX_COMPOSITE1 }, + { IVTV_CARD_INPUT_COMPOSITE3, 1, IVTV_SAA71XX_COMPOSITE5 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, MSP_MONO }, + { IVTV_CARD_INPUT_LINE_IN1, MSP_SCART1 }, + { IVTV_CARD_INPUT_LINE_IN2, MSP_SCART3 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, MSP_SCART2 }, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Hauppauge PVR-150/PVR-500 cards */ + +static const struct ivtv_card ivtv_card_pvr150 = { + .type = IVTV_CARD_PVR_150, + .name = "Hauppauge WinTV PVR-150", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_muxer = IVTV_HW_WM8775, + .hw_all = IVTV_HW_WM8775 | IVTV_HW_CX25840 | + IVTV_HW_TVEEPROM | IVTV_HW_TUNER | + IVTV_HW_I2C_IR_RX_HAUP_EXT | IVTV_HW_I2C_IR_RX_HAUP_INT | + IVTV_HW_Z8F0811_IR_HAUP, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE7 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO1 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE3 }, + { IVTV_CARD_INPUT_SVIDEO2, 2, CX25840_SVIDEO2 }, + { IVTV_CARD_INPUT_COMPOSITE2, 2, CX25840_COMPOSITE4 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, + CX25840_AUDIO8, WM8775_AIN2 }, + { IVTV_CARD_INPUT_LINE_IN1, + CX25840_AUDIO_SERIAL, WM8775_AIN2 }, + { IVTV_CARD_INPUT_LINE_IN2, + CX25840_AUDIO_SERIAL, WM8775_AIN3 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, + CX25840_AUDIO_SERIAL, WM8775_AIN4 }, + /* apparently needed for the IR blaster */ + .gpio_init = { .direction = 0x1f01, .initial_value = 0x26f3 }, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* AVerMedia M179 cards */ + +static const struct ivtv_card_pci_info ivtv_pci_m179[] = { + { PCI_DEVICE_ID_IVTV15, IVTV_PCI_ID_AVERMEDIA, 0xa3cf }, + { PCI_DEVICE_ID_IVTV15, IVTV_PCI_ID_AVERMEDIA, 0xa3ce }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_m179 = { + .type = IVTV_CARD_M179, + .name = "AVerMedia M179", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7114, + .hw_audio = IVTV_HW_GPIO, + .hw_audio_ctrl = IVTV_HW_GPIO, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7114 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE3 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN }, + }, + .gpio_init = { .direction = 0xe380, .initial_value = 0x8290 }, + .gpio_audio_input = { .mask = 0x8040, .tuner = 0x8000, .linein = 0x0000 }, + .gpio_audio_mute = { .mask = 0x2000, .mute = 0x2000 }, + .gpio_audio_mode = { .mask = 0x4300, .mono = 0x4000, .stereo = 0x0200, + .lang1 = 0x0200, .lang2 = 0x0100, .both = 0x0000 }, + .gpio_audio_freq = { .mask = 0x0018, .f32000 = 0x0000, + .f44100 = 0x0008, .f48000 = 0x0010 }, + .gpio_audio_detect = { .mask = 0x4000, .stereo = 0x0000 }, + .tuners = { + /* As far as we know all M179 cards use this tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_NTSC }, + }, + .pci_list = ivtv_pci_m179, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Yuan MPG600/Kuroutoshikou ITVC16-STVLP cards */ + +static const struct ivtv_card_pci_info ivtv_pci_mpg600[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN1, 0xfff3 }, + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN1, 0xffff }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_mpg600 = { + .type = IVTV_CARD_MPG600, + .name = "Yuan MPG600, Kuroutoshikou ITVC16-STVLP", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115, + .hw_audio = IVTV_HW_GPIO, + .hw_audio_ctrl = IVTV_HW_GPIO, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE3 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN }, + }, + .gpio_init = { .direction = 0x3080, .initial_value = 0x0004 }, + .gpio_audio_input = { .mask = 0x3000, .tuner = 0x0000, .linein = 0x2000 }, + .gpio_audio_mute = { .mask = 0x0001, .mute = 0x0001 }, + .gpio_audio_mode = { .mask = 0x000e, .mono = 0x0006, .stereo = 0x0004, + .lang1 = 0x0004, .lang2 = 0x0000, .both = 0x0008 }, + .gpio_audio_detect = { .mask = 0x0900, .stereo = 0x0100 }, + .tuners = { + /* The PAL tuner is confirmed */ + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FQ1216ME }, + { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, + }, + .pci_list = ivtv_pci_mpg600, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Yuan MPG160/Kuroutoshikou ITVC15-STVLP cards */ + +static const struct ivtv_card_pci_info ivtv_pci_mpg160[] = { + { PCI_DEVICE_ID_IVTV15, IVTV_PCI_ID_YUAN1, 0 }, + { PCI_DEVICE_ID_IVTV15, IVTV_PCI_ID_IODATA, 0x40a0 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_mpg160 = { + .type = IVTV_CARD_MPG160, + .name = "YUAN MPG160, Kuroutoshikou ITVC15-STVLP, I/O Data GV-M2TV/PCI", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7114, + .hw_audio = IVTV_HW_GPIO, + .hw_audio_ctrl = IVTV_HW_GPIO, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7114 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE3 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN }, + }, + .gpio_init = { .direction = 0x7080, .initial_value = 0x400c }, + .gpio_audio_input = { .mask = 0x3000, .tuner = 0x0000, .linein = 0x2000 }, + .gpio_audio_mute = { .mask = 0x0001, .mute = 0x0001 }, + .gpio_audio_mode = { .mask = 0x000e, .mono = 0x0006, .stereo = 0x0004, + .lang1 = 0x0004, .lang2 = 0x0000, .both = 0x0008 }, + .gpio_audio_detect = { .mask = 0x0900, .stereo = 0x0100 }, + .tuners = { + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FQ1216ME }, + { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, + }, + .pci_list = ivtv_pci_mpg160, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Yuan PG600/Diamond PVR-550 cards */ + +static const struct ivtv_card_pci_info ivtv_pci_pg600[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_DIAMONDMM, 0x0070 }, + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN3, 0x0600 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_pg600 = { + .type = IVTV_CARD_PG600, + .name = "Yuan PG600, Diamond PVR-550", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, + CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, + }, + .tuners = { + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FQ1216ME }, + { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, + }, + .pci_list = ivtv_pci_pg600, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Adaptec VideOh! AVC-2410 card */ + +static const struct ivtv_card_pci_info ivtv_pci_avc2410[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0093 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_avc2410 = { + .type = IVTV_CARD_AVC2410, + .name = "Adaptec VideOh! AVC-2410", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115, + .hw_audio = IVTV_HW_MSP34XX, + .hw_audio_ctrl = IVTV_HW_MSP34XX, + .hw_muxer = IVTV_HW_CS53L32A, + .hw_all = IVTV_HW_MSP34XX | IVTV_HW_CS53L32A | + IVTV_HW_SAA7115 | IVTV_HW_TUNER | + IVTV_HW_I2C_IR_RX_ADAPTEC, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE3 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, + MSP_TUNER, CS53L32A_IN0 }, + { IVTV_CARD_INPUT_LINE_IN1, + MSP_SCART1, CS53L32A_IN2 }, + }, + /* This card has no eeprom and in fact the Windows driver relies + on the country/region setting of the user to decide which tuner + is available. */ + .tuners = { + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_ALL - V4L2_STD_NTSC_M_JP, + .tuner = TUNER_PHILIPS_FM1236_MK3 }, + { .std = V4L2_STD_NTSC_M_JP, .tuner = TUNER_PHILIPS_FQ1286 }, + }, + .pci_list = ivtv_pci_avc2410, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Adaptec VideOh! AVC-2010 card */ + +static const struct ivtv_card_pci_info ivtv_pci_avc2010[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0092 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_avc2010 = { + .type = IVTV_CARD_AVC2010, + .name = "Adaptec VideOh! AVC-2010", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115, + .hw_audio = IVTV_HW_CS53L32A, + .hw_audio_ctrl = IVTV_HW_CS53L32A, + .hw_all = IVTV_HW_CS53L32A | IVTV_HW_SAA7115, + .video_inputs = { + { IVTV_CARD_INPUT_SVIDEO1, 0, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 0, IVTV_SAA71XX_COMPOSITE3 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_LINE_IN1, CS53L32A_IN2 }, + }, + /* Does not have a tuner */ + .pci_list = ivtv_pci_avc2010, +}; + +/* ------------------------------------------------------------------------- */ + +/* Nagase Transgear 5000TV card */ + +static const struct ivtv_card_pci_info ivtv_pci_tg5000tv[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xbfff }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_tg5000tv = { + .type = IVTV_CARD_TG5000TV, + .name = "Nagase Transgear 5000TV", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7114 | IVTV_HW_UPD64031A | IVTV_HW_UPD6408X | + IVTV_HW_GPIO, + .hw_audio = IVTV_HW_GPIO, + .hw_audio_ctrl = IVTV_HW_GPIO, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7114 | IVTV_HW_TUNER | + IVTV_HW_UPD64031A | IVTV_HW_UPD6408X, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO2 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_SVIDEO2 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN }, + }, + .gr_config = UPD64031A_VERTICAL_EXTERNAL, + .gpio_init = { .direction = 0xe080, .initial_value = 0x8000 }, + .gpio_audio_input = { .mask = 0x8080, .tuner = 0x8000, .linein = 0x0080 }, + .gpio_audio_mute = { .mask = 0x6000, .mute = 0x6000 }, + .gpio_audio_mode = { .mask = 0x4300, .mono = 0x4000, .stereo = 0x0200, + .lang1 = 0x0300, .lang2 = 0x0000, .both = 0x0200 }, + .gpio_video_input = { .mask = 0x0030, .tuner = 0x0000, + .composite = 0x0010, .svideo = 0x0020 }, + .tuners = { + { .std = V4L2_STD_MN, .tuner = TUNER_PHILIPS_FQ1286 }, + }, + .pci_list = ivtv_pci_tg5000tv, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* AOpen VA2000MAX-SNT6 card */ + +static const struct ivtv_card_pci_info ivtv_pci_va2000[] = { + { PCI_DEVICE_ID_IVTV16, 0, 0xff5f }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_va2000 = { + .type = IVTV_CARD_VA2000MAX_SNT6, + .name = "AOpen VA2000MAX-SNT6", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115 | IVTV_HW_UPD6408X, + .hw_audio = IVTV_HW_MSP34XX, + .hw_audio_ctrl = IVTV_HW_MSP34XX, + .hw_all = IVTV_HW_MSP34XX | IVTV_HW_SAA7115 | + IVTV_HW_UPD6408X | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_SVIDEO0 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, MSP_TUNER }, + }, + .tuners = { + { .std = V4L2_STD_MN, .tuner = TUNER_PHILIPS_FQ1286 }, + }, + .pci_list = ivtv_pci_va2000, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Yuan MPG600GR/Kuroutoshikou CX23416GYC-STVLP cards */ + +static const struct ivtv_card_pci_info ivtv_pci_cx23416gyc[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN1, 0x0600 }, + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN4, 0x0600 }, + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_MELCO, 0x0523 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_cx23416gyc = { + .type = IVTV_CARD_CX23416GYC, + .name = "Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA717X | IVTV_HW_GPIO | + IVTV_HW_UPD64031A | IVTV_HW_UPD6408X, + .hw_audio = IVTV_HW_SAA717X, + .hw_audio_ctrl = IVTV_HW_SAA717X, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA717X | IVTV_HW_TUNER | + IVTV_HW_UPD64031A | IVTV_HW_UPD6408X, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_SVIDEO3 | + IVTV_SAA717X_TUNER_FLAG }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_SVIDEO3 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_SAA717X_IN2 }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_SAA717X_IN0 }, + }, + .gr_config = UPD64031A_VERTICAL_EXTERNAL, + .gpio_init = { .direction = 0xf880, .initial_value = 0x8800 }, + .gpio_video_input = { .mask = 0x0020, .tuner = 0x0000, + .composite = 0x0020, .svideo = 0x0020 }, + .gpio_audio_freq = { .mask = 0xc000, .f32000 = 0x0000, + .f44100 = 0x4000, .f48000 = 0x8000 }, + .tuners = { + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, + }, + .pci_list = ivtv_pci_cx23416gyc, + .i2c = &ivtv_i2c_std, +}; + +static const struct ivtv_card ivtv_card_cx23416gyc_nogr = { + .type = IVTV_CARD_CX23416GYC_NOGR, + .name = "Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR)", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA717X | IVTV_HW_GPIO | IVTV_HW_UPD6408X, + .hw_audio = IVTV_HW_SAA717X, + .hw_audio_ctrl = IVTV_HW_SAA717X, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA717X | IVTV_HW_TUNER | + IVTV_HW_UPD6408X, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 | + IVTV_SAA717X_TUNER_FLAG }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE0 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_SAA717X_IN2 }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_SAA717X_IN0 }, + }, + .gpio_init = { .direction = 0xf880, .initial_value = 0x8800 }, + .gpio_video_input = { .mask = 0x0020, .tuner = 0x0000, + .composite = 0x0020, .svideo = 0x0020 }, + .gpio_audio_freq = { .mask = 0xc000, .f32000 = 0x0000, + .f44100 = 0x4000, .f48000 = 0x8000 }, + .tuners = { + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, + }, + .i2c = &ivtv_i2c_std, +}; + +static const struct ivtv_card ivtv_card_cx23416gyc_nogrycs = { + .type = IVTV_CARD_CX23416GYC_NOGRYCS, + .name = "Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR/YCS)", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA717X | IVTV_HW_GPIO, + .hw_audio = IVTV_HW_SAA717X, + .hw_audio_ctrl = IVTV_HW_SAA717X, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA717X | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 | + IVTV_SAA717X_TUNER_FLAG }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE0 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_SAA717X_IN2 }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_SAA717X_IN0 }, + }, + .gpio_init = { .direction = 0xf880, .initial_value = 0x8800 }, + .gpio_video_input = { .mask = 0x0020, .tuner = 0x0000, + .composite = 0x0020, .svideo = 0x0020 }, + .gpio_audio_freq = { .mask = 0xc000, .f32000 = 0x0000, + .f44100 = 0x4000, .f48000 = 0x8000 }, + .tuners = { + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, + }, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* I/O Data GV-MVP/RX & GV-MVP/RX2W (dual tuner) cards */ + +static const struct ivtv_card_pci_info ivtv_pci_gv_mvprx[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_IODATA, 0xd01e }, + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_IODATA, 0xd038 }, /* 2W unit #1 */ + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_IODATA, 0xd039 }, /* 2W unit #2 */ + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_gv_mvprx = { + .type = IVTV_CARD_GV_MVPRX, + .name = "I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner)", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115 | IVTV_HW_UPD64031A | IVTV_HW_UPD6408X, + .hw_audio = IVTV_HW_GPIO, + .hw_audio_ctrl = IVTV_HW_WM8739, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_VP27SMPX | + IVTV_HW_TUNER | IVTV_HW_WM8739 | + IVTV_HW_UPD64031A | IVTV_HW_UPD6408X, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO1 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_SVIDEO2 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN }, + }, + .gpio_init = { .direction = 0xc301, .initial_value = 0x0200 }, + .gpio_audio_input = { .mask = 0xffff, .tuner = 0x0200, .linein = 0x0300 }, + .tuners = { + /* This card has the Panasonic VP27 tuner */ + { .std = V4L2_STD_MN, .tuner = TUNER_PANASONIC_VP27 }, + }, + .pci_list = ivtv_pci_gv_mvprx, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* I/O Data GV-MVP/RX2E card */ + +static const struct ivtv_card_pci_info ivtv_pci_gv_mvprx2e[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_IODATA, 0xd025 }, + {0, 0, 0} +}; + +static const struct ivtv_card ivtv_card_gv_mvprx2e = { + .type = IVTV_CARD_GV_MVPRX2E, + .name = "I/O Data GV-MVP/RX2E", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115, + .hw_audio = IVTV_HW_GPIO, + .hw_audio_ctrl = IVTV_HW_WM8739, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_TUNER | + IVTV_HW_VP27SMPX | IVTV_HW_WM8739, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE3 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN }, + }, + .gpio_init = { .direction = 0xc301, .initial_value = 0x0200 }, + .gpio_audio_input = { .mask = 0xffff, .tuner = 0x0200, .linein = 0x0300 }, + .tuners = { + /* This card has the Panasonic VP27 tuner */ + { .std = V4L2_STD_MN, .tuner = TUNER_PANASONIC_VP27 }, + }, + .pci_list = ivtv_pci_gv_mvprx2e, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* GotVIEW PCI DVD card */ + +static const struct ivtv_card_pci_info ivtv_pci_gotview_pci_dvd[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN1, 0x0600 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_gotview_pci_dvd = { + .type = IVTV_CARD_GOTVIEW_PCI_DVD, + .name = "GotView PCI DVD", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA717X, + .hw_audio = IVTV_HW_SAA717X, + .hw_audio_ctrl = IVTV_HW_SAA717X, + .hw_all = IVTV_HW_SAA717X | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE1 }, /* pin 116 */ + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 }, /* pin 114/109 */ + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE3 }, /* pin 118 */ + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_SAA717X_IN0 }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_SAA717X_IN2 }, + }, + .gpio_init = { .direction = 0xf000, .initial_value = 0xA000 }, + .tuners = { + /* This card has a Philips FQ1216ME MK3 tuner */ + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + }, + .pci_list = ivtv_pci_gotview_pci_dvd, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* GotVIEW PCI DVD2 Deluxe card */ + +static const struct ivtv_card_pci_info ivtv_pci_gotview_pci_dvd2[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_GOTVIEW1, 0x0600 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_gotview_pci_dvd2 = { + .type = IVTV_CARD_GOTVIEW_PCI_DVD2, + .name = "GotView PCI DVD2 Deluxe", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_muxer = IVTV_HW_GPIO, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, + CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5, 0 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 }, + .gpio_init = { .direction = 0x0800, .initial_value = 0 }, + .gpio_audio_input = { .mask = 0x0800, .tuner = 0, .linein = 0, .radio = 0x0800 }, + .tuners = { + /* This card has a Philips FQ1216ME MK5 tuner */ + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + }, + .pci_list = ivtv_pci_gotview_pci_dvd2, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Yuan MPC622 miniPCI card */ + +static const struct ivtv_card_pci_info ivtv_pci_yuan_mpc622[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN2, 0xd998 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_yuan_mpc622 = { + .type = IVTV_CARD_YUAN_MPC622, + .name = "Yuan MPC622", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, + CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, + }, + .gpio_init = { .direction = 0x00ff, .initial_value = 0x0002 }, + .tuners = { + /* This card has the TDA8290/TDA8275 tuner chips */ + { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_TDA8290 }, + }, + .pci_list = ivtv_pci_yuan_mpc622, + .i2c = &ivtv_i2c_tda8290, +}; + +/* ------------------------------------------------------------------------- */ + +/* DIGITAL COWBOY DCT-MTVP1 card */ + +static const struct ivtv_card_pci_info ivtv_pci_dctmvtvp1[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xbfff }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_dctmvtvp1 = { + .type = IVTV_CARD_DCTMTVP1, + .name = "Digital Cowboy DCT-MTVP1", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115 | IVTV_HW_UPD64031A | IVTV_HW_UPD6408X | + IVTV_HW_GPIO, + .hw_audio = IVTV_HW_GPIO, + .hw_audio_ctrl = IVTV_HW_GPIO, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_TUNER | + IVTV_HW_UPD64031A | IVTV_HW_UPD6408X, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_SVIDEO0 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO2 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_SVIDEO2 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN }, + }, + .gpio_init = { .direction = 0xe080, .initial_value = 0x8000 }, + .gpio_audio_input = { .mask = 0x8080, .tuner = 0x8000, .linein = 0x0080 }, + .gpio_audio_mute = { .mask = 0x6000, .mute = 0x6000 }, + .gpio_audio_mode = { .mask = 0x4300, .mono = 0x4000, .stereo = 0x0200, + .lang1 = 0x0300, .lang2 = 0x0000, .both = 0x0200 }, + .gpio_video_input = { .mask = 0x0030, .tuner = 0x0000, + .composite = 0x0010, .svideo = 0x0020}, + .tuners = { + { .std = V4L2_STD_MN, .tuner = TUNER_PHILIPS_FQ1286 }, + }, + .pci_list = ivtv_pci_dctmvtvp1, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Yuan PG600-2/GotView PCI DVD Lite cards */ + +static const struct ivtv_card_pci_info ivtv_pci_pg600v2[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN3, 0x0600 }, + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_GOTVIEW2, 0x0600 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_pg600v2 = { + .type = IVTV_CARD_PG600V2, + .name = "Yuan PG600-2, GotView PCI DVD Lite", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, + /* XC2028 support apparently works for the Yuan, it's still + uncertain whether it also works with the GotView. */ + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, + CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + .xceive_pin = 12, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .pci_list = ivtv_pci_pg600v2, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Club3D ZAP-TV1x01 cards */ + +static const struct ivtv_card_pci_info ivtv_pci_club3d[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN3, 0x0600 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_club3d = { + .type = IVTV_CARD_CLUB3D, + .name = "Club3D ZAP-TV1x01", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, + CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE3 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + .xceive_pin = 12, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .pci_list = ivtv_pci_club3d, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* AVerTV MCE 116 Plus (M116) card */ + +static const struct ivtv_card_pci_info ivtv_pci_avertv_mce116[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc439 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_avertv_mce116 = { + .type = IVTV_CARD_AVERTV_MCE116, + .name = "AVerTV MCE 116 Plus", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739 | + IVTV_HW_I2C_IR_RX_AVER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + /* enable line-in */ + .gpio_init = { .direction = 0xe000, .initial_value = 0x4000 }, + .xceive_pin = 10, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .pci_list = ivtv_pci_avertv_mce116, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* AVerMedia PVR-150 Plus / AVerTV M113 cards with a Daewoo/Partsnic Tuner */ + +static const struct ivtv_card_pci_info ivtv_pci_aver_pvr150[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc034 }, /* NTSC */ + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc035 }, /* NTSC FM */ + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_aver_pvr150 = { + .type = IVTV_CARD_AVER_PVR150PLUS, + .name = "AVerMedia PVR-150 Plus / AVerTV M113 Partsnic (Daewoo) Tuner", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_muxer = IVTV_HW_GPIO, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | + IVTV_HW_WM8739 | IVTV_HW_GPIO, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5, 0 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 }, + /* The 74HC4052 Dual 4:1 multiplexer is controlled by 2 GPIO lines */ + .gpio_init = { .direction = 0xc000, .initial_value = 0 }, + .gpio_audio_input = { .mask = 0xc000, + .tuner = 0x0000, + .linein = 0x4000, + .radio = 0x8000 }, + .tuners = { + /* Subsystem ID's 0xc03[45] have a Partsnic PTI-5NF05 tuner */ + { .std = V4L2_STD_MN, .tuner = TUNER_PARTSNIC_PTI_5NF05 }, + }, + .pci_list = ivtv_pci_aver_pvr150, + /* Subsystem ID 0xc035 has a TEA5767(?) FM tuner, 0xc034 does not */ + .i2c = &ivtv_i2c_radio, +}; + +/* ------------------------------------------------------------------------- */ + +/* AVerMedia UltraTV 1500 MCE (newer non-cx88 version, M113 variant) card */ + +static const struct ivtv_card_pci_info ivtv_pci_aver_ultra1500mce[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc019 }, /* NTSC */ + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc01b }, /* PAL/SECAM */ + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_aver_ultra1500mce = { + .type = IVTV_CARD_AVER_ULTRA1500MCE, + .name = "AVerMedia UltraTV 1500 MCE / AVerTV M113 Philips Tuner", + .comment = "For non-NTSC tuners, use the pal= or secam= module options", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_muxer = IVTV_HW_GPIO, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | + IVTV_HW_WM8739 | IVTV_HW_GPIO, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5, 0 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 }, + /* The 74HC4052 Dual 4:1 multiplexer is controlled by 2 GPIO lines */ + .gpio_init = { .direction = 0xc000, .initial_value = 0 }, + .gpio_audio_input = { .mask = 0xc000, + .tuner = 0x0000, + .linein = 0x4000, + .radio = 0x8000 }, + .tuners = { + /* The UltraTV 1500 MCE has a Philips FM1236 MK5 TV/FM tuner */ + { .std = V4L2_STD_MN, .tuner = TUNER_PHILIPS_FM1236_MK3 }, + { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216MK5 }, + }, + .pci_list = ivtv_pci_aver_ultra1500mce, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* AVerMedia EZMaker PCI Deluxe card */ + +static const struct ivtv_card_pci_info ivtv_pci_aver_ezmaker[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc03f }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_aver_ezmaker = { + .type = IVTV_CARD_AVER_EZMAKER, + .name = "AVerMedia EZMaker PCI Deluxe", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_WM8739, + .video_inputs = { + { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 0 }, + }, + .gpio_init = { .direction = 0x4000, .initial_value = 0x4000 }, + /* Does not have a tuner */ + .pci_list = ivtv_pci_aver_ezmaker, +}; + +/* ------------------------------------------------------------------------- */ + +/* ASUS Falcon2 */ + +static const struct ivtv_card_pci_info ivtv_pci_asus_falcon2[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ASUSTEK, 0x4b66 }, + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ASUSTEK, 0x462e }, + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ASUSTEK, 0x4b2e }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_asus_falcon2 = { + .type = IVTV_CARD_ASUS_FALCON2, + .name = "ASUS Falcon2", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_muxer = IVTV_HW_M52790, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_M52790 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 2, CX25840_COMPOSITE2 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5, M52790_IN_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, + M52790_IN_V2 | M52790_SW1_YCMIX | M52790_SW2_YCMIX }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, M52790_IN_V2 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, M52790_IN_TUNER }, + .tuners = { + { .std = V4L2_STD_MN, .tuner = TUNER_PHILIPS_FM1236_MK3 }, + }, + .pci_list = ivtv_pci_asus_falcon2, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* AVerMedia M104 miniPCI card */ + +static const struct ivtv_card_pci_info ivtv_pci_aver_m104[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc136 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_aver_m104 = { + .type = IVTV_CARD_AVER_M104, + .name = "AVerMedia M104", + .comment = "Not yet supported!\n", + .v4l2_capabilities = 0, /*IVTV_CAP_ENCODER,*/ + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739, + .video_inputs = { + { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 }, + /* enable line-in + reset tuner */ + .gpio_init = { .direction = 0xe000, .initial_value = 0x4000 }, + .xceive_pin = 10, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .pci_list = ivtv_pci_aver_m104, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Buffalo PC-MV5L/PCI cards */ + +static const struct ivtv_card_pci_info ivtv_pci_buffalo[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_MELCO, 0x052b }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_buffalo = { + .type = IVTV_CARD_BUFFALO_MV5L, + .name = "Buffalo PC-MV5L/PCI", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, + CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, + }, + .xceive_pin = 12, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .pci_list = ivtv_pci_buffalo, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ +/* Sony Kikyou */ + +static const struct ivtv_card_pci_info ivtv_pci_kikyou[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_SONY, 0x813d }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_kikyou = { + .type = IVTV_CARD_KIKYOU, + .name = "Sony VAIO Giga Pocket (ENX Kikyou)", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_SAA7115, + .hw_audio = IVTV_HW_GPIO, + .hw_audio_ctrl = IVTV_HW_GPIO, + .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE1 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE1 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER }, + { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN }, + { IVTV_CARD_INPUT_LINE_IN2, IVTV_GPIO_LINE_IN }, + }, + .gpio_init = { .direction = 0x03e1, .initial_value = 0x0320 }, + .gpio_audio_input = { .mask = 0x0060, + .tuner = 0x0020, + .linein = 0x0000, + .radio = 0x0060 }, + .gpio_audio_mute = { .mask = 0x0000, + .mute = 0x0000 }, /* 0x200? Disable for now. */ + .gpio_audio_mode = { .mask = 0x0080, + .mono = 0x0000, + .stereo = 0x0000, /* SAP */ + .lang1 = 0x0080, + .lang2 = 0x0000, + .both = 0x0080 }, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_SONY_BTF_PXN01Z }, + }, + .pci_list = ivtv_pci_kikyou, + .i2c = &ivtv_i2c_std, +}; + + +static const struct ivtv_card *ivtv_card_list[] = { + &ivtv_card_pvr250, + &ivtv_card_pvr350, + &ivtv_card_pvr150, + &ivtv_card_m179, + &ivtv_card_mpg600, + &ivtv_card_mpg160, + &ivtv_card_pg600, + &ivtv_card_avc2410, + &ivtv_card_avc2010, + &ivtv_card_tg5000tv, + &ivtv_card_va2000, + &ivtv_card_cx23416gyc, + &ivtv_card_gv_mvprx, + &ivtv_card_gv_mvprx2e, + &ivtv_card_gotview_pci_dvd, + &ivtv_card_gotview_pci_dvd2, + &ivtv_card_yuan_mpc622, + &ivtv_card_dctmvtvp1, + &ivtv_card_pg600v2, + &ivtv_card_club3d, + &ivtv_card_avertv_mce116, + &ivtv_card_asus_falcon2, + &ivtv_card_aver_pvr150, + &ivtv_card_aver_ezmaker, + &ivtv_card_aver_m104, + &ivtv_card_buffalo, + &ivtv_card_aver_ultra1500mce, + &ivtv_card_kikyou, + + /* Variations of standard cards but with the same PCI IDs. + These cards must come last in this list. */ + &ivtv_card_pvr350_v1, + &ivtv_card_cx23416gyc_nogr, + &ivtv_card_cx23416gyc_nogrycs, +}; + +const struct ivtv_card *ivtv_get_card(u16 index) +{ + if (index >= ARRAY_SIZE(ivtv_card_list)) + return NULL; + return ivtv_card_list[index]; +} + +int ivtv_get_input(struct ivtv *itv, u16 index, struct v4l2_input *input) +{ + const struct ivtv_card_video_input *card_input = itv->card->video_inputs + index; + static const char * const input_strs[] = { + "Tuner 1", + "S-Video 1", + "S-Video 2", + "Composite 1", + "Composite 2", + "Composite 3" + }; + + if (index >= itv->nof_inputs) + return -EINVAL; + input->index = index; + strlcpy(input->name, input_strs[card_input->video_type - 1], + sizeof(input->name)); + input->type = (card_input->video_type == IVTV_CARD_INPUT_VID_TUNER ? + V4L2_INPUT_TYPE_TUNER : V4L2_INPUT_TYPE_CAMERA); + input->audioset = (1 << itv->nof_audio_inputs) - 1; + input->std = (input->type == V4L2_INPUT_TYPE_TUNER) ? + itv->tuner_std : V4L2_STD_ALL; + return 0; +} + +int ivtv_get_output(struct ivtv *itv, u16 index, struct v4l2_output *output) +{ + const struct ivtv_card_output *card_output = itv->card->video_outputs + index; + + if (index >= itv->card->nof_outputs) + return -EINVAL; + output->index = index; + strlcpy(output->name, card_output->name, sizeof(output->name)); + output->type = V4L2_OUTPUT_TYPE_ANALOG; + output->audioset = 1; + output->std = V4L2_STD_ALL; + return 0; +} + +int ivtv_get_audio_input(struct ivtv *itv, u16 index, struct v4l2_audio *audio) +{ + const struct ivtv_card_audio_input *aud_input = itv->card->audio_inputs + index; + static const char * const input_strs[] = { + "Tuner 1", + "Line In 1", + "Line In 2" + }; + + memset(audio, 0, sizeof(*audio)); + if (index >= itv->nof_audio_inputs) + return -EINVAL; + strlcpy(audio->name, input_strs[aud_input->audio_type - 1], + sizeof(audio->name)); + audio->index = index; + audio->capability = V4L2_AUDCAP_STEREO; + return 0; +} + +int ivtv_get_audio_output(struct ivtv *itv, u16 index, struct v4l2_audioout *aud_output) +{ + memset(aud_output, 0, sizeof(*aud_output)); + if (itv->card->video_outputs == NULL || index != 0) + return -EINVAL; + strlcpy(aud_output->name, "A/V Audio Out", sizeof(aud_output->name)); + return 0; +} diff --git a/drivers/media/pci/ivtv/ivtv-cards.h b/drivers/media/pci/ivtv/ivtv-cards.h new file mode 100644 index 00000000..e6f5c029 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-cards.h @@ -0,0 +1,309 @@ +/* + Functions to query card hardware + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_CARDS_H +#define IVTV_CARDS_H + +/* Supported cards */ +#define IVTV_CARD_PVR_250 0 /* WinTV PVR 250 */ +#define IVTV_CARD_PVR_350 1 /* encoder, decoder, tv-out */ +#define IVTV_CARD_PVR_150 2 /* WinTV PVR 150 and PVR 500 (really just two + PVR150s on one PCI board) */ +#define IVTV_CARD_M179 3 /* AVerMedia M179 (encoder only) */ +#define IVTV_CARD_MPG600 4 /* Kuroutoshikou ITVC16-STVLP/YUAN MPG600, encoder only */ +#define IVTV_CARD_MPG160 5 /* Kuroutoshikou ITVC15-STVLP/YUAN MPG160 + cx23415 based, but does not have tv-out */ +#define IVTV_CARD_PG600 6 /* YUAN PG600/DIAMONDMM PVR-550 based on the CX Falcon 2 */ +#define IVTV_CARD_AVC2410 7 /* Adaptec AVC-2410 */ +#define IVTV_CARD_AVC2010 8 /* Adaptec AVD-2010 (No Tuner) */ +#define IVTV_CARD_TG5000TV 9 /* NAGASE TRANSGEAR 5000TV, encoder only */ +#define IVTV_CARD_VA2000MAX_SNT6 10 /* VA2000MAX-STN6 */ +#define IVTV_CARD_CX23416GYC 11 /* Kuroutoshikou CX23416GYC-STVLP (Yuan MPG600GR OEM) */ +#define IVTV_CARD_GV_MVPRX 12 /* I/O Data GV-MVP/RX, RX2, RX2W */ +#define IVTV_CARD_GV_MVPRX2E 13 /* I/O Data GV-MVP/RX2E */ +#define IVTV_CARD_GOTVIEW_PCI_DVD 14 /* GotView PCI DVD */ +#define IVTV_CARD_GOTVIEW_PCI_DVD2 15 /* GotView PCI DVD2 */ +#define IVTV_CARD_YUAN_MPC622 16 /* Yuan MPC622 miniPCI */ +#define IVTV_CARD_DCTMTVP1 17 /* DIGITAL COWBOY DCT-MTVP1 */ +#define IVTV_CARD_PG600V2 18 /* Yuan PG600V2/GotView PCI DVD Lite */ +#define IVTV_CARD_CLUB3D 19 /* Club3D ZAP-TV1x01 */ +#define IVTV_CARD_AVERTV_MCE116 20 /* AVerTV MCE 116 Plus */ +#define IVTV_CARD_ASUS_FALCON2 21 /* ASUS Falcon2 */ +#define IVTV_CARD_AVER_PVR150PLUS 22 /* AVerMedia PVR-150 Plus */ +#define IVTV_CARD_AVER_EZMAKER 23 /* AVerMedia EZMaker PCI Deluxe */ +#define IVTV_CARD_AVER_M104 24 /* AverMedia M104 miniPCI card */ +#define IVTV_CARD_BUFFALO_MV5L 25 /* Buffalo PC-MV5L/PCI card */ +#define IVTV_CARD_AVER_ULTRA1500MCE 26 /* AVerMedia UltraTV 1500 MCE */ +#define IVTV_CARD_KIKYOU 27 /* Sony VAIO Giga Pocket (ENX Kikyou) */ +#define IVTV_CARD_LAST 27 + +/* Variants of existing cards but with the same PCI IDs. The driver + detects these based on other device information. + These cards must always come last. + New cards must be inserted above, and the indices of the cards below + must be adjusted accordingly. */ + +/* PVR-350 V1 (uses saa7114) */ +#define IVTV_CARD_PVR_350_V1 (IVTV_CARD_LAST+1) +/* 2 variants of Kuroutoshikou CX23416GYC-STVLP (Yuan MPG600GR OEM) */ +#define IVTV_CARD_CX23416GYC_NOGR (IVTV_CARD_LAST+2) +#define IVTV_CARD_CX23416GYC_NOGRYCS (IVTV_CARD_LAST+3) + +/* system vendor and device IDs */ +#define PCI_VENDOR_ID_ICOMP 0x4444 +#define PCI_DEVICE_ID_IVTV15 0x0803 +#define PCI_DEVICE_ID_IVTV16 0x0016 + +/* subsystem vendor ID */ +#define IVTV_PCI_ID_HAUPPAUGE 0x0070 +#define IVTV_PCI_ID_HAUPPAUGE_ALT1 0x0270 +#define IVTV_PCI_ID_HAUPPAUGE_ALT2 0x4070 +#define IVTV_PCI_ID_ADAPTEC 0x9005 +#define IVTV_PCI_ID_ASUSTEK 0x1043 +#define IVTV_PCI_ID_AVERMEDIA 0x1461 +#define IVTV_PCI_ID_YUAN1 0x12ab +#define IVTV_PCI_ID_YUAN2 0xff01 +#define IVTV_PCI_ID_YUAN3 0xffab +#define IVTV_PCI_ID_YUAN4 0xfbab +#define IVTV_PCI_ID_DIAMONDMM 0xff92 +#define IVTV_PCI_ID_IODATA 0x10fc +#define IVTV_PCI_ID_MELCO 0x1154 +#define IVTV_PCI_ID_GOTVIEW1 0xffac +#define IVTV_PCI_ID_GOTVIEW2 0xffad +#define IVTV_PCI_ID_SONY 0x104d + +/* hardware flags, no gaps allowed */ +#define IVTV_HW_CX25840 (1 << 0) +#define IVTV_HW_SAA7115 (1 << 1) +#define IVTV_HW_SAA7127 (1 << 2) +#define IVTV_HW_MSP34XX (1 << 3) +#define IVTV_HW_TUNER (1 << 4) +#define IVTV_HW_WM8775 (1 << 5) +#define IVTV_HW_CS53L32A (1 << 6) +#define IVTV_HW_TVEEPROM (1 << 7) +#define IVTV_HW_SAA7114 (1 << 8) +#define IVTV_HW_UPD64031A (1 << 9) +#define IVTV_HW_UPD6408X (1 << 10) +#define IVTV_HW_SAA717X (1 << 11) +#define IVTV_HW_WM8739 (1 << 12) +#define IVTV_HW_VP27SMPX (1 << 13) +#define IVTV_HW_M52790 (1 << 14) +#define IVTV_HW_GPIO (1 << 15) +#define IVTV_HW_I2C_IR_RX_AVER (1 << 16) +#define IVTV_HW_I2C_IR_RX_HAUP_EXT (1 << 17) /* External before internal */ +#define IVTV_HW_I2C_IR_RX_HAUP_INT (1 << 18) +#define IVTV_HW_Z8F0811_IR_TX_HAUP (1 << 19) +#define IVTV_HW_Z8F0811_IR_RX_HAUP (1 << 20) +#define IVTV_HW_I2C_IR_RX_ADAPTEC (1 << 21) + +#define IVTV_HW_Z8F0811_IR_HAUP (IVTV_HW_Z8F0811_IR_RX_HAUP | \ + IVTV_HW_Z8F0811_IR_TX_HAUP) + +#define IVTV_HW_SAA711X (IVTV_HW_SAA7115 | IVTV_HW_SAA7114) + +#define IVTV_HW_IR_RX_ANY (IVTV_HW_I2C_IR_RX_AVER | \ + IVTV_HW_I2C_IR_RX_HAUP_EXT | \ + IVTV_HW_I2C_IR_RX_HAUP_INT | \ + IVTV_HW_Z8F0811_IR_RX_HAUP | \ + IVTV_HW_I2C_IR_RX_ADAPTEC) + +#define IVTV_HW_IR_TX_ANY (IVTV_HW_Z8F0811_IR_TX_HAUP) + +#define IVTV_HW_IR_ANY (IVTV_HW_IR_RX_ANY | IVTV_HW_IR_TX_ANY) + +/* video inputs */ +#define IVTV_CARD_INPUT_VID_TUNER 1 +#define IVTV_CARD_INPUT_SVIDEO1 2 +#define IVTV_CARD_INPUT_SVIDEO2 3 +#define IVTV_CARD_INPUT_COMPOSITE1 4 +#define IVTV_CARD_INPUT_COMPOSITE2 5 +#define IVTV_CARD_INPUT_COMPOSITE3 6 + +/* audio inputs */ +#define IVTV_CARD_INPUT_AUD_TUNER 1 +#define IVTV_CARD_INPUT_LINE_IN1 2 +#define IVTV_CARD_INPUT_LINE_IN2 3 + +#define IVTV_CARD_MAX_VIDEO_INPUTS 6 +#define IVTV_CARD_MAX_AUDIO_INPUTS 3 +#define IVTV_CARD_MAX_TUNERS 3 + +/* SAA71XX HW inputs */ +#define IVTV_SAA71XX_COMPOSITE0 0 +#define IVTV_SAA71XX_COMPOSITE1 1 +#define IVTV_SAA71XX_COMPOSITE2 2 +#define IVTV_SAA71XX_COMPOSITE3 3 +#define IVTV_SAA71XX_COMPOSITE4 4 +#define IVTV_SAA71XX_COMPOSITE5 5 +#define IVTV_SAA71XX_SVIDEO0 6 +#define IVTV_SAA71XX_SVIDEO1 7 +#define IVTV_SAA71XX_SVIDEO2 8 +#define IVTV_SAA71XX_SVIDEO3 9 + +/* SAA717X needs to mark the tuner input by ORing with this flag */ +#define IVTV_SAA717X_TUNER_FLAG 0x80 + +/* Dummy HW input */ +#define IVTV_DUMMY_AUDIO 0 + +/* GPIO HW inputs */ +#define IVTV_GPIO_TUNER 0 +#define IVTV_GPIO_LINE_IN 1 + +/* SAA717X HW inputs */ +#define IVTV_SAA717X_IN0 0 +#define IVTV_SAA717X_IN1 1 +#define IVTV_SAA717X_IN2 2 + +/* V4L2 capability aliases */ +#define IVTV_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | V4L2_CAP_VBI_CAPTURE | \ + V4L2_CAP_SLICED_VBI_CAPTURE) +#define IVTV_CAP_DECODER (V4L2_CAP_VIDEO_OUTPUT | \ + V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_VIDEO_OUTPUT_OVERLAY) + +struct ivtv_card_video_input { + u8 video_type; /* video input type */ + u8 audio_index; /* index in ivtv_card_audio_input array */ + u16 video_input; /* hardware video input */ +}; + +struct ivtv_card_audio_input { + u8 audio_type; /* audio input type */ + u32 audio_input; /* hardware audio input */ + u16 muxer_input; /* hardware muxer input for boards with a + multiplexer chip */ +}; + +struct ivtv_card_output { + u8 name[32]; + u16 video_output; /* hardware video output */ +}; + +struct ivtv_card_pci_info { + u16 device; + u16 subsystem_vendor; + u16 subsystem_device; +}; + +/* GPIO definitions */ + +/* The mask is the set of bits used by the operation */ + +struct ivtv_gpio_init { /* set initial GPIO DIR and OUT values */ + u16 direction; /* DIR setting. Leave to 0 if no init is needed */ + u16 initial_value; +}; + +struct ivtv_gpio_video_input { /* select tuner/line in input */ + u16 mask; /* leave to 0 if not supported */ + u16 tuner; + u16 composite; + u16 svideo; +}; + +struct ivtv_gpio_audio_input { /* select tuner/line in input */ + u16 mask; /* leave to 0 if not supported */ + u16 tuner; + u16 linein; + u16 radio; +}; + +struct ivtv_gpio_audio_mute { + u16 mask; /* leave to 0 if not supported */ + u16 mute; /* set this value to mute, 0 to unmute */ +}; + +struct ivtv_gpio_audio_mode { + u16 mask; /* leave to 0 if not supported */ + u16 mono; /* set audio to mono */ + u16 stereo; /* set audio to stereo */ + u16 lang1; /* set audio to the first language */ + u16 lang2; /* set audio to the second language */ + u16 both; /* both languages are output */ +}; + +struct ivtv_gpio_audio_freq { + u16 mask; /* leave to 0 if not supported */ + u16 f32000; + u16 f44100; + u16 f48000; +}; + +struct ivtv_gpio_audio_detect { + u16 mask; /* leave to 0 if not supported */ + u16 stereo; /* if the input matches this value then + stereo is detected */ +}; + +struct ivtv_card_tuner { + v4l2_std_id std; /* standard for which the tuner is suitable */ + int tuner; /* tuner ID (from tuner.h) */ +}; + +struct ivtv_card_tuner_i2c { + unsigned short radio[2];/* radio tuner i2c address to probe */ + unsigned short demod[2];/* demodulator i2c address to probe */ + unsigned short tv[4]; /* tv tuner i2c addresses to probe */ +}; + +/* for card information/parameters */ +struct ivtv_card { + int type; + char *name; + char *comment; + u32 v4l2_capabilities; + u32 hw_video; /* hardware used to process video */ + u32 hw_audio; /* hardware used to process audio */ + u32 hw_audio_ctrl; /* hardware used for the V4L2 controls (only 1 dev allowed) */ + u32 hw_muxer; /* hardware used to multiplex audio input */ + u32 hw_all; /* all hardware used by the board */ + struct ivtv_card_video_input video_inputs[IVTV_CARD_MAX_VIDEO_INPUTS]; + struct ivtv_card_audio_input audio_inputs[IVTV_CARD_MAX_AUDIO_INPUTS]; + struct ivtv_card_audio_input radio_input; + int nof_outputs; + const struct ivtv_card_output *video_outputs; + u8 gr_config; /* config byte for the ghost reduction device */ + u8 xceive_pin; /* XCeive tuner GPIO reset pin */ + + /* GPIO card-specific settings */ + struct ivtv_gpio_init gpio_init; + struct ivtv_gpio_video_input gpio_video_input; + struct ivtv_gpio_audio_input gpio_audio_input; + struct ivtv_gpio_audio_mute gpio_audio_mute; + struct ivtv_gpio_audio_mode gpio_audio_mode; + struct ivtv_gpio_audio_freq gpio_audio_freq; + struct ivtv_gpio_audio_detect gpio_audio_detect; + + struct ivtv_card_tuner tuners[IVTV_CARD_MAX_TUNERS]; + struct ivtv_card_tuner_i2c *i2c; + + /* list of device and subsystem vendor/devices that + correspond to this card type. */ + const struct ivtv_card_pci_info *pci_list; +}; + +int ivtv_get_input(struct ivtv *itv, u16 index, struct v4l2_input *input); +int ivtv_get_output(struct ivtv *itv, u16 index, struct v4l2_output *output); +int ivtv_get_audio_input(struct ivtv *itv, u16 index, struct v4l2_audio *input); +int ivtv_get_audio_output(struct ivtv *itv, u16 index, struct v4l2_audioout *output); +const struct ivtv_card *ivtv_get_card(u16 index); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-controls.c b/drivers/media/pci/ivtv/ivtv-controls.c new file mode 100644 index 00000000..c6042460 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-controls.c @@ -0,0 +1,163 @@ +/* + ioctl control functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-ioctl.h" +#include "ivtv-controls.h" +#include "ivtv-mailbox.h" + +static int ivtv_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) +{ + struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl); + + /* First try to allocate sliced VBI buffers if needed. */ + if (fmt && itv->vbi.sliced_mpeg_data[0] == NULL) { + int i; + + for (i = 0; i < IVTV_VBI_FRAMES; i++) { + /* Yuck, hardcoded. Needs to be a define */ + itv->vbi.sliced_mpeg_data[i] = kmalloc(2049, GFP_KERNEL); + if (itv->vbi.sliced_mpeg_data[i] == NULL) { + while (--i >= 0) { + kfree(itv->vbi.sliced_mpeg_data[i]); + itv->vbi.sliced_mpeg_data[i] = NULL; + } + return -ENOMEM; + } + } + } + + itv->vbi.insert_mpeg = fmt; + + if (itv->vbi.insert_mpeg == 0) { + return 0; + } + /* Need sliced data for mpeg insertion */ + if (ivtv_get_service_set(itv->vbi.sliced_in) == 0) { + if (itv->is_60hz) + itv->vbi.sliced_in->service_set = V4L2_SLICED_CAPTION_525; + else + itv->vbi.sliced_in->service_set = V4L2_SLICED_WSS_625; + ivtv_expand_service_set(itv->vbi.sliced_in, itv->is_50hz); + } + return 0; +} + +static int ivtv_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val) +{ + struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl); + int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; + struct v4l2_mbus_framefmt fmt; + + /* fix videodecoder resolution */ + fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1); + fmt.height = cxhdl->height; + fmt.code = V4L2_MBUS_FMT_FIXED; + v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt); + return 0; +} + +static int ivtv_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx) +{ + static const u32 freqs[3] = { 44100, 48000, 32000 }; + struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl); + + /* The audio clock of the digitizer must match the codec sample + rate otherwise you get some very strange effects. */ + if (idx < ARRAY_SIZE(freqs)) + ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]); + return 0; +} + +static int ivtv_s_audio_mode(struct cx2341x_handler *cxhdl, u32 val) +{ + struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl); + + itv->dualwatch_stereo_mode = val; + return 0; +} + +struct cx2341x_handler_ops ivtv_cxhdl_ops = { + .s_audio_mode = ivtv_s_audio_mode, + .s_audio_sampling_freq = ivtv_s_audio_sampling_freq, + .s_video_encoding = ivtv_s_video_encoding, + .s_stream_vbi_fmt = ivtv_s_stream_vbi_fmt, +}; + +int ivtv_g_pts_frame(struct ivtv *itv, s64 *pts, s64 *frame) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + + if (test_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags)) { + *pts = (s64)((u64)itv->last_dec_timing[2] << 32) | + (u64)itv->last_dec_timing[1]; + *frame = itv->last_dec_timing[0]; + return 0; + } + *pts = 0; + *frame = 0; + if (atomic_read(&itv->decoding)) { + if (ivtv_api(itv, CX2341X_DEC_GET_TIMING_INFO, 5, data)) { + IVTV_DEBUG_WARN("GET_TIMING: couldn't read clock\n"); + return -EIO; + } + memcpy(itv->last_dec_timing, data, sizeof(itv->last_dec_timing)); + set_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags); + *pts = (s64)((u64) data[2] << 32) | (u64) data[1]; + *frame = data[0]; + /*timing->scr = (u64) (((u64) data[4] << 32) | (u64) (data[3]));*/ + } + return 0; +} + +static int ivtv_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ivtv *itv = container_of(ctrl->handler, struct ivtv, cxhdl.hdl); + + switch (ctrl->id) { + /* V4L2_CID_MPEG_VIDEO_DEC_PTS and V4L2_CID_MPEG_VIDEO_DEC_FRAME + control cluster */ + case V4L2_CID_MPEG_VIDEO_DEC_PTS: + return ivtv_g_pts_frame(itv, &itv->ctrl_pts->val64, + &itv->ctrl_frame->val64); + } + return 0; +} + +static int ivtv_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ivtv *itv = container_of(ctrl->handler, struct ivtv, cxhdl.hdl); + + switch (ctrl->id) { + /* V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK and MULTILINGUAL_PLAYBACK + control cluster */ + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: + itv->audio_stereo_mode = itv->ctrl_audio_playback->val - 1; + itv->audio_bilingual_mode = itv->ctrl_audio_multilingual_playback->val - 1; + ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); + break; + } + return 0; +} + +const struct v4l2_ctrl_ops ivtv_hdl_out_ops = { + .s_ctrl = ivtv_s_ctrl, + .g_volatile_ctrl = ivtv_g_volatile_ctrl, +}; diff --git a/drivers/media/pci/ivtv/ivtv-controls.h b/drivers/media/pci/ivtv/ivtv-controls.h new file mode 100644 index 00000000..3999e635 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-controls.h @@ -0,0 +1,28 @@ +/* + ioctl control functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_CONTROLS_H +#define IVTV_CONTROLS_H + +extern struct cx2341x_handler_ops ivtv_cxhdl_ops; +extern const struct v4l2_ctrl_ops ivtv_hdl_out_ops; +int ivtv_g_pts_frame(struct ivtv *itv, s64 *pts, s64 *frame); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-driver.c b/drivers/media/pci/ivtv/ivtv-driver.c new file mode 100644 index 00000000..07b84609 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-driver.c @@ -0,0 +1,1535 @@ +/* + ivtv driver initialization and card probing + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* Main Driver file for the ivtv project: + * Driver for the Conexant CX23415/CX23416 chip. + * Author: Kevin Thayer (nufan_wfk at yahoo.com) + * License: GPL + * http://www.ivtvdriver.org + * + * ----- + * MPG600/MPG160 support by T.Adachi + * and Takeru KOMORIYA + * + * AVerMedia M179 GPIO info by Chris Pinkham + * using information provided by Jiun-Kuei Jung @ AVerMedia. + * + * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta + * using information from T.Adachi,Takeru KOMORIYA and others :-) + * + * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX + * version by T.Adachi. Special thanks Mr.Suzuki + */ + +#include "ivtv-driver.h" +#include "ivtv-version.h" +#include "ivtv-fileops.h" +#include "ivtv-i2c.h" +#include "ivtv-firmware.h" +#include "ivtv-queue.h" +#include "ivtv-udma.h" +#include "ivtv-irq.h" +#include "ivtv-mailbox.h" +#include "ivtv-streams.h" +#include "ivtv-ioctl.h" +#include "ivtv-cards.h" +#include "ivtv-vbi.h" +#include "ivtv-routing.h" +#include "ivtv-controls.h" +#include "ivtv-gpio.h" +#include +#include +#include +#include +#include "tuner-xc2028.h" + +/* If you have already X v4l cards, then set this to X. This way + the device numbers stay matched. Example: you have a WinTV card + without radio and a PVR-350 with. Normally this would give a + video1 device together with a radio0 device for the PVR. By + setting this to 1 you ensure that radio0 is now also radio1. */ +int ivtv_first_minor; + +/* Callback for registering extensions */ +int (*ivtv_ext_init)(struct ivtv *); +EXPORT_SYMBOL(ivtv_ext_init); + +/* add your revision and whatnot here */ +static struct pci_device_id ivtv_pci_tbl[] = { + {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV15, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV16, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci,ivtv_pci_tbl); + +/* ivtv instance counter */ +static atomic_t ivtv_instance = ATOMIC_INIT(0); + +/* Parameter declarations */ +static int cardtype[IVTV_MAX_CARDS]; +static int tuner[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static int radio[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; + +static unsigned int cardtype_c = 1; +static unsigned int tuner_c = 1; +static int radio_c = 1; +static unsigned int i2c_clock_period_c = 1; +static char pal[] = "---"; +static char secam[] = "--"; +static char ntsc[] = "-"; + +/* Buffers */ + +/* DMA Buffers, Default size in MB allocated */ +#define IVTV_DEFAULT_ENC_MPG_BUFFERS 4 +#define IVTV_DEFAULT_ENC_YUV_BUFFERS 2 +#define IVTV_DEFAULT_ENC_VBI_BUFFERS 1 +/* Exception: size in kB for this stream (MB is overkill) */ +#define IVTV_DEFAULT_ENC_PCM_BUFFERS 320 +#define IVTV_DEFAULT_DEC_MPG_BUFFERS 1 +#define IVTV_DEFAULT_DEC_YUV_BUFFERS 1 +/* Exception: size in kB for this stream (MB is way overkill) */ +#define IVTV_DEFAULT_DEC_VBI_BUFFERS 64 + +static int enc_mpg_buffers = IVTV_DEFAULT_ENC_MPG_BUFFERS; +static int enc_yuv_buffers = IVTV_DEFAULT_ENC_YUV_BUFFERS; +static int enc_vbi_buffers = IVTV_DEFAULT_ENC_VBI_BUFFERS; +static int enc_pcm_buffers = IVTV_DEFAULT_ENC_PCM_BUFFERS; +static int dec_mpg_buffers = IVTV_DEFAULT_DEC_MPG_BUFFERS; +static int dec_yuv_buffers = IVTV_DEFAULT_DEC_YUV_BUFFERS; +static int dec_vbi_buffers = IVTV_DEFAULT_DEC_VBI_BUFFERS; + +static int ivtv_yuv_mode; +static int ivtv_yuv_threshold = -1; +static int ivtv_pci_latency = 1; + +int ivtv_debug; +#ifdef CONFIG_VIDEO_ADV_DEBUG +int ivtv_fw_debug; +#endif + +static int tunertype = -1; +static int newi2c = -1; + +module_param_array(tuner, int, &tuner_c, 0644); +module_param_array(radio, int, &radio_c, 0644); +module_param_array(cardtype, int, &cardtype_c, 0644); +module_param_string(pal, pal, sizeof(pal), 0644); +module_param_string(secam, secam, sizeof(secam), 0644); +module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); +module_param_named(debug,ivtv_debug, int, 0644); +#ifdef CONFIG_VIDEO_ADV_DEBUG +module_param_named(fw_debug, ivtv_fw_debug, int, 0644); +#endif +module_param(ivtv_pci_latency, int, 0644); +module_param(ivtv_yuv_mode, int, 0644); +module_param(ivtv_yuv_threshold, int, 0644); +module_param(ivtv_first_minor, int, 0644); + +module_param(enc_mpg_buffers, int, 0644); +module_param(enc_yuv_buffers, int, 0644); +module_param(enc_vbi_buffers, int, 0644); +module_param(enc_pcm_buffers, int, 0644); +module_param(dec_mpg_buffers, int, 0644); +module_param(dec_yuv_buffers, int, 0644); +module_param(dec_vbi_buffers, int, 0644); + +module_param(tunertype, int, 0644); +module_param(newi2c, int, 0644); +module_param_array(i2c_clock_period, int, &i2c_clock_period_c, 0644); + +MODULE_PARM_DESC(tuner, "Tuner type selection,\n" + "\t\t\tsee tuner.h for values"); +MODULE_PARM_DESC(radio, + "Enable or disable the radio. Use only if autodetection\n" + "\t\t\tfails. 0 = disable, 1 = enable"); +MODULE_PARM_DESC(cardtype, + "Only use this option if your card is not detected properly.\n" + "\t\tSpecify card type:\n" + "\t\t\t 1 = WinTV PVR 250\n" + "\t\t\t 2 = WinTV PVR 350\n" + "\t\t\t 3 = WinTV PVR-150 or PVR-500\n" + "\t\t\t 4 = AVerMedia M179\n" + "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n" + "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n" + "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n" + "\t\t\t 8 = Adaptec AVC-2410\n" + "\t\t\t 9 = Adaptec AVC-2010\n" + "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n" + "\t\t\t11 = AOpen VA2000MAX-STN6\n" + "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n" + "\t\t\t13 = I/O Data GV-MVP/RX\n" + "\t\t\t14 = I/O Data GV-MVP/RX2E\n" + "\t\t\t15 = GOTVIEW PCI DVD\n" + "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n" + "\t\t\t17 = Yuan MPC622\n" + "\t\t\t18 = Digital Cowboy DCT-MTVP1\n" + "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n" + "\t\t\t20 = Club3D ZAP-TV1x01\n" + "\t\t\t21 = AverTV MCE 116 Plus\n" + "\t\t\t22 = ASUS Falcon2\n" + "\t\t\t23 = AverMedia PVR-150 Plus\n" + "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n" + "\t\t\t25 = AverMedia M104 (not yet working)\n" + "\t\t\t26 = Buffalo PC-MV5L/PCI\n" + "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n" + "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n" + "\t\t\t 0 = Autodetect (default)\n" + "\t\t\t-1 = Ignore this card\n\t\t"); +MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60"); +MODULE_PARM_DESC(secam, "Set SECAM standard: BGH, DK, L, LC"); +MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J (Japan), K (South Korea)"); +MODULE_PARM_DESC(tunertype, + "Specify tuner type:\n" + "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n" + "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n" + "\t\t\t-1 = Autodetect (default)\n"); +MODULE_PARM_DESC(debug, + "Debug level (bitmask). Default: 0\n" + "\t\t\t 1/0x0001: warning\n" + "\t\t\t 2/0x0002: info\n" + "\t\t\t 4/0x0004: mailbox\n" + "\t\t\t 8/0x0008: ioctl\n" + "\t\t\t 16/0x0010: file\n" + "\t\t\t 32/0x0020: dma\n" + "\t\t\t 64/0x0040: irq\n" + "\t\t\t 128/0x0080: decoder\n" + "\t\t\t 256/0x0100: yuv\n" + "\t\t\t 512/0x0200: i2c\n" + "\t\t\t1024/0x0400: high volume\n"); +#ifdef CONFIG_VIDEO_ADV_DEBUG +MODULE_PARM_DESC(fw_debug, + "Enable code for debugging firmware problems. Default: 0\n"); +#endif +MODULE_PARM_DESC(ivtv_pci_latency, + "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n" + "\t\t\tDefault: Yes"); +MODULE_PARM_DESC(ivtv_yuv_mode, + "Specify the yuv playback mode:\n" + "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n" + "\t\t\tDefault: 0 (interlaced)"); +MODULE_PARM_DESC(ivtv_yuv_threshold, + "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n" + "\t\t\tDefault: 480"); +MODULE_PARM_DESC(enc_mpg_buffers, + "Encoder MPG Buffers (in MB)\n" + "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS)); +MODULE_PARM_DESC(enc_yuv_buffers, + "Encoder YUV Buffers (in MB)\n" + "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS)); +MODULE_PARM_DESC(enc_vbi_buffers, + "Encoder VBI Buffers (in MB)\n" + "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS)); +MODULE_PARM_DESC(enc_pcm_buffers, + "Encoder PCM buffers (in kB)\n" + "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS)); +MODULE_PARM_DESC(dec_mpg_buffers, + "Decoder MPG buffers (in MB)\n" + "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS)); +MODULE_PARM_DESC(dec_yuv_buffers, + "Decoder YUV buffers (in MB)\n" + "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS)); +MODULE_PARM_DESC(dec_vbi_buffers, + "Decoder VBI buffers (in kB)\n" + "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS)); +MODULE_PARM_DESC(newi2c, + "Use new I2C implementation\n" + "\t\t\t-1 is autodetect, 0 is off, 1 is on\n" + "\t\t\tDefault is autodetect"); +MODULE_PARM_DESC(i2c_clock_period, + "Period of SCL for the I2C bus controlled by the CX23415/6\n" + "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n" + "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD)); + +MODULE_PARM_DESC(ivtv_first_minor, "Set device node number assigned to first card"); + +MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); +MODULE_DESCRIPTION("CX23415/CX23416 driver"); +MODULE_SUPPORTED_DEVICE + ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n" + "\t\t\tYuan MPG series and similar)"); +MODULE_LICENSE("GPL"); + +MODULE_VERSION(IVTV_VERSION); + +#if defined(CONFIG_MODULES) && defined(MODULE) +static void request_module_async(struct work_struct *work) +{ + struct ivtv *dev = container_of(work, struct ivtv, request_module_wk); + + /* Make sure ivtv-alsa module is loaded */ + request_module("ivtv-alsa"); + + /* Initialize ivtv-alsa for this instance of the cx18 device */ + if (ivtv_ext_init != NULL) + ivtv_ext_init(dev); +} + +static void request_modules(struct ivtv *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_modules(struct ivtv *dev) +{ + flush_work(&dev->request_module_wk); +} +#else +#define request_modules(dev) +#define flush_request_modules(dev) +#endif /* CONFIG_MODULES */ + +void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask) +{ + itv->irqmask &= ~mask; + write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK); +} + +void ivtv_set_irq_mask(struct ivtv *itv, u32 mask) +{ + itv->irqmask |= mask; + write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK); +} + +int ivtv_set_output_mode(struct ivtv *itv, int mode) +{ + int old_mode; + + spin_lock(&itv->lock); + old_mode = itv->output_mode; + if (old_mode == 0) + itv->output_mode = old_mode = mode; + spin_unlock(&itv->lock); + return old_mode; +} + +struct ivtv_stream *ivtv_get_output_stream(struct ivtv *itv) +{ + switch (itv->output_mode) { + case OUT_MPG: + return &itv->streams[IVTV_DEC_STREAM_TYPE_MPG]; + case OUT_YUV: + return &itv->streams[IVTV_DEC_STREAM_TYPE_YUV]; + default: + return NULL; + } +} + +int ivtv_waitq(wait_queue_head_t *waitq) +{ + DEFINE_WAIT(wait); + + prepare_to_wait(waitq, &wait, TASK_INTERRUPTIBLE); + schedule(); + finish_wait(waitq, &wait); + return signal_pending(current) ? -EINTR : 0; +} + +/* Generic utility functions */ +int ivtv_msleep_timeout(unsigned int msecs, int intr) +{ + int timeout = msecs_to_jiffies(msecs); + + do { + set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); + timeout = schedule_timeout(timeout); + if (intr) { + int ret = signal_pending(current); + + if (ret) + return ret; + } + } while (timeout); + return 0; +} + +/* Release ioremapped memory */ +static void ivtv_iounmap(struct ivtv *itv) +{ + if (itv == NULL) + return; + + /* Release registers memory */ + if (itv->reg_mem != NULL) { + IVTV_DEBUG_INFO("releasing reg_mem\n"); + iounmap(itv->reg_mem); + itv->reg_mem = NULL; + } + /* Release io memory */ + if (itv->has_cx23415 && itv->dec_mem != NULL) { + IVTV_DEBUG_INFO("releasing dec_mem\n"); + iounmap(itv->dec_mem); + } + itv->dec_mem = NULL; + + /* Release io memory */ + if (itv->enc_mem != NULL) { + IVTV_DEBUG_INFO("releasing enc_mem\n"); + iounmap(itv->enc_mem); + itv->enc_mem = NULL; + } +} + +/* Hauppauge card? get values from tveeprom */ +void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv) +{ + u8 eedata[256]; + + itv->i2c_client.addr = 0xA0 >> 1; + tveeprom_read(&itv->i2c_client, eedata, sizeof(eedata)); + tveeprom_hauppauge_analog(&itv->i2c_client, tv, eedata); +} + +static void ivtv_process_eeprom(struct ivtv *itv) +{ + struct tveeprom tv; + int pci_slot = PCI_SLOT(itv->pdev->devfn); + + ivtv_read_eeprom(itv, &tv); + + /* Many thanks to Steven Toth from Hauppauge for providing the + model numbers */ + switch (tv.model) { + /* In a few cases the PCI subsystem IDs do not correctly + identify the card. A better method is to check the + model number from the eeprom instead. */ + case 30012 ... 30039: /* Low profile PVR250 */ + case 32000 ... 32999: + case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */ + case 48400 ... 48599: + itv->card = ivtv_get_card(IVTV_CARD_PVR_250); + break; + case 48100 ... 48399: + case 48600 ... 48999: + itv->card = ivtv_get_card(IVTV_CARD_PVR_350); + break; + case 23000 ... 23999: /* PVR500 */ + case 25000 ... 25999: /* Low profile PVR150 */ + case 26000 ... 26999: /* Regular PVR150 */ + itv->card = ivtv_get_card(IVTV_CARD_PVR_150); + break; + case 0: + IVTV_ERR("Invalid EEPROM\n"); + return; + default: + IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv.model); + itv->card = ivtv_get_card(IVTV_CARD_PVR_150); + break; + } + + switch (tv.model) { + /* Old style PVR350 (with an saa7114) uses this input for + the tuner. */ + case 48254: + itv->card = ivtv_get_card(IVTV_CARD_PVR_350_V1); + break; + default: + break; + } + + itv->v4l2_cap = itv->card->v4l2_capabilities; + itv->card_name = itv->card->name; + itv->card_i2c = itv->card->i2c; + + /* If this is a PVR500 then it should be possible to detect whether it is the + first or second unit by looking at the subsystem device ID: is bit 4 is + set, then it is the second unit (according to info from Hauppauge). + + However, while this works for most cards, I have seen a few PVR500 cards + where both units have the same subsystem ID. + + So instead I look at the reported 'PCI slot' (which is the slot on the PVR500 + PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise + it is the second unit. It is possible that it is a different slot when ivtv is + used in Xen, in that case I ignore this card here. The worst that can happen + is that the card presents itself with a non-working radio device. + + This detection is needed since the eeprom reports incorrectly that a radio is + present on the second unit. */ + if (tv.model / 1000 == 23) { + static const struct ivtv_card_tuner_i2c ivtv_i2c_radio = { + .radio = { 0x60, I2C_CLIENT_END }, + .demod = { 0x43, I2C_CLIENT_END }, + .tv = { 0x61, I2C_CLIENT_END }, + }; + + itv->card_name = "WinTV PVR 500"; + itv->card_i2c = &ivtv_i2c_radio; + if (pci_slot == 8 || pci_slot == 9) { + int is_first = (pci_slot & 1) == 0; + + itv->card_name = is_first ? "WinTV PVR 500 (unit #1)" : + "WinTV PVR 500 (unit #2)"; + if (!is_first) { + IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n"); + tv.has_radio = 0; + } + } + } + IVTV_INFO("Autodetected %s\n", itv->card_name); + + switch (tv.tuner_hauppauge_model) { + case 85: + case 99: + case 112: + itv->pvr150_workaround = 1; + break; + default: + break; + } + if (tv.tuner_type == TUNER_ABSENT) + IVTV_ERR("tveeprom cannot autodetect tuner!\n"); + + if (itv->options.tuner == -1) + itv->options.tuner = tv.tuner_type; + if (itv->options.radio == -1) + itv->options.radio = (tv.has_radio != 0); + /* only enable newi2c if an IR blaster is present */ + if (itv->options.newi2c == -1 && tv.has_ir) { + itv->options.newi2c = (tv.has_ir & 4) ? 1 : 0; + if (itv->options.newi2c) { + IVTV_INFO("Reopen i2c bus for IR-blaster support\n"); + exit_ivtv_i2c(itv); + init_ivtv_i2c(itv); + } + } + + if (itv->std != 0) + /* user specified tuner standard */ + return; + + /* autodetect tuner standard */ + if (tv.tuner_formats & V4L2_STD_PAL) { + IVTV_DEBUG_INFO("PAL tuner detected\n"); + itv->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H; + } else if (tv.tuner_formats & V4L2_STD_NTSC) { + IVTV_DEBUG_INFO("NTSC tuner detected\n"); + itv->std |= V4L2_STD_NTSC_M; + } else if (tv.tuner_formats & V4L2_STD_SECAM) { + IVTV_DEBUG_INFO("SECAM tuner detected\n"); + itv->std |= V4L2_STD_SECAM_L; + } else { + IVTV_INFO("No tuner detected, default to NTSC-M\n"); + itv->std |= V4L2_STD_NTSC_M; + } +} + +static v4l2_std_id ivtv_parse_std(struct ivtv *itv) +{ + switch (pal[0]) { + case '6': + tunertype = 0; + return V4L2_STD_PAL_60; + case 'b': + case 'B': + case 'g': + case 'G': + case 'h': + case 'H': + tunertype = 0; + return V4L2_STD_PAL_BG | V4L2_STD_PAL_H; + case 'n': + case 'N': + tunertype = 1; + if (pal[1] == 'c' || pal[1] == 'C') + return V4L2_STD_PAL_Nc; + return V4L2_STD_PAL_N; + case 'i': + case 'I': + tunertype = 0; + return V4L2_STD_PAL_I; + case 'd': + case 'D': + case 'k': + case 'K': + tunertype = 0; + return V4L2_STD_PAL_DK; + case 'M': + case 'm': + tunertype = 1; + return V4L2_STD_PAL_M; + case '-': + break; + default: + IVTV_WARN("pal= argument not recognised\n"); + return 0; + } + + switch (secam[0]) { + case 'b': + case 'B': + case 'g': + case 'G': + case 'h': + case 'H': + tunertype = 0; + return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H; + case 'd': + case 'D': + case 'k': + case 'K': + tunertype = 0; + return V4L2_STD_SECAM_DK; + case 'l': + case 'L': + tunertype = 0; + if (secam[1] == 'C' || secam[1] == 'c') + return V4L2_STD_SECAM_LC; + return V4L2_STD_SECAM_L; + case '-': + break; + default: + IVTV_WARN("secam= argument not recognised\n"); + return 0; + } + + switch (ntsc[0]) { + case 'm': + case 'M': + tunertype = 1; + return V4L2_STD_NTSC_M; + case 'j': + case 'J': + tunertype = 1; + return V4L2_STD_NTSC_M_JP; + case 'k': + case 'K': + tunertype = 1; + return V4L2_STD_NTSC_M_KR; + case '-': + break; + default: + IVTV_WARN("ntsc= argument not recognised\n"); + return 0; + } + + /* no match found */ + return 0; +} + +static void ivtv_process_options(struct ivtv *itv) +{ + const char *chipname; + int i, j; + + itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers * 1024; + itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers * 1024; + itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers * 1024; + itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers; + itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_MPG] = dec_mpg_buffers * 1024; + itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_YUV] = dec_yuv_buffers * 1024; + itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_VBI] = dec_vbi_buffers; + itv->options.cardtype = cardtype[itv->instance]; + itv->options.tuner = tuner[itv->instance]; + itv->options.radio = radio[itv->instance]; + + itv->options.i2c_clock_period = i2c_clock_period[itv->instance]; + if (itv->options.i2c_clock_period == -1) + itv->options.i2c_clock_period = IVTV_DEFAULT_I2C_CLOCK_PERIOD; + else if (itv->options.i2c_clock_period < 10) + itv->options.i2c_clock_period = 10; + else if (itv->options.i2c_clock_period > 4500) + itv->options.i2c_clock_period = 4500; + + itv->options.newi2c = newi2c; + if (tunertype < -1 || tunertype > 1) { + IVTV_WARN("Invalid tunertype argument, will autodetect instead\n"); + tunertype = -1; + } + itv->std = ivtv_parse_std(itv); + if (itv->std == 0 && tunertype >= 0) + itv->std = tunertype ? V4L2_STD_MN : (V4L2_STD_ALL & ~V4L2_STD_MN); + itv->has_cx23415 = (itv->pdev->device == PCI_DEVICE_ID_IVTV15); + chipname = itv->has_cx23415 ? "cx23415" : "cx23416"; + if (itv->options.cardtype == -1) { + IVTV_INFO("Ignore card (detected %s based chip)\n", chipname); + return; + } + if ((itv->card = ivtv_get_card(itv->options.cardtype - 1))) { + IVTV_INFO("User specified %s card (detected %s based chip)\n", + itv->card->name, chipname); + } else if (itv->options.cardtype != 0) { + IVTV_ERR("Unknown user specified type, trying to autodetect card\n"); + } + if (itv->card == NULL) { + if (itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE || + itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT1 || + itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT2) { + itv->card = ivtv_get_card(itv->has_cx23415 ? IVTV_CARD_PVR_350 : IVTV_CARD_PVR_150); + IVTV_INFO("Autodetected Hauppauge card (%s based)\n", + chipname); + } + } + if (itv->card == NULL) { + for (i = 0; (itv->card = ivtv_get_card(i)); i++) { + if (itv->card->pci_list == NULL) + continue; + for (j = 0; itv->card->pci_list[j].device; j++) { + if (itv->pdev->device != + itv->card->pci_list[j].device) + continue; + if (itv->pdev->subsystem_vendor != + itv->card->pci_list[j].subsystem_vendor) + continue; + if (itv->pdev->subsystem_device != + itv->card->pci_list[j].subsystem_device) + continue; + IVTV_INFO("Autodetected %s card (%s based)\n", + itv->card->name, chipname); + goto done; + } + } + } +done: + + if (itv->card == NULL) { + itv->card = ivtv_get_card(IVTV_CARD_PVR_150); + IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n", + itv->pdev->vendor, itv->pdev->device); + IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n", + itv->pdev->subsystem_vendor, itv->pdev->subsystem_device); + IVTV_ERR(" %s based\n", chipname); + IVTV_ERR("Defaulting to %s card\n", itv->card->name); + IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n"); + IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n"); + IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n"); + } + itv->v4l2_cap = itv->card->v4l2_capabilities; + itv->card_name = itv->card->name; + itv->card_i2c = itv->card->i2c; +} + +/* Precondition: the ivtv structure has been memset to 0. Only + the dev and num fields have been filled in. + No assumptions on the card type may be made here (see ivtv_init_struct2 + for that). + */ +static int ivtv_init_struct1(struct ivtv *itv) +{ + struct sched_param param = { .sched_priority = 99 }; + + itv->base_addr = pci_resource_start(itv->pdev, 0); + itv->enc_mbox.max_mbox = 2; /* the encoder has 3 mailboxes (0-2) */ + itv->dec_mbox.max_mbox = 1; /* the decoder has 2 mailboxes (0-1) */ + + mutex_init(&itv->serialize_lock); + mutex_init(&itv->i2c_bus_lock); + mutex_init(&itv->udma.lock); + + spin_lock_init(&itv->lock); + spin_lock_init(&itv->dma_reg_lock); + + init_kthread_worker(&itv->irq_worker); + itv->irq_worker_task = kthread_run(kthread_worker_fn, &itv->irq_worker, + itv->v4l2_dev.name); + if (IS_ERR(itv->irq_worker_task)) { + IVTV_ERR("Could not create ivtv task\n"); + return -1; + } + /* must use the FIFO scheduler as it is realtime sensitive */ + sched_setscheduler(itv->irq_worker_task, SCHED_FIFO, ¶m); + + init_kthread_work(&itv->irq_work, ivtv_irq_work_handler); + + /* Initial settings */ + itv->cxhdl.port = CX2341X_PORT_MEMORY; + itv->cxhdl.capabilities = CX2341X_CAP_HAS_SLICED_VBI; + init_waitqueue_head(&itv->eos_waitq); + init_waitqueue_head(&itv->event_waitq); + init_waitqueue_head(&itv->vsync_waitq); + init_waitqueue_head(&itv->dma_waitq); + init_timer(&itv->dma_timer); + itv->dma_timer.function = ivtv_unfinished_dma; + itv->dma_timer.data = (unsigned long)itv; + + itv->cur_dma_stream = -1; + itv->cur_pio_stream = -1; + + /* Ctrls */ + itv->speed = 1000; + + /* VBI */ + itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; + itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced; + + /* Init the sg table for osd/yuv output */ + sg_init_table(itv->udma.SGlist, IVTV_DMA_SG_OSD_ENT); + + /* OSD */ + itv->osd_global_alpha_state = 1; + itv->osd_global_alpha = 255; + + /* YUV */ + atomic_set(&itv->yuv_info.next_dma_frame, -1); + itv->yuv_info.lace_mode = ivtv_yuv_mode; + itv->yuv_info.lace_threshold = ivtv_yuv_threshold; + itv->yuv_info.max_frames_buffered = 3; + itv->yuv_info.track_osd = 1; + return 0; +} + +/* Second initialization part. Here the card type has been + autodetected. */ +static void ivtv_init_struct2(struct ivtv *itv) +{ + int i; + + for (i = 0; i < IVTV_CARD_MAX_VIDEO_INPUTS; i++) + if (itv->card->video_inputs[i].video_type == 0) + break; + itv->nof_inputs = i; + for (i = 0; i < IVTV_CARD_MAX_AUDIO_INPUTS; i++) + if (itv->card->audio_inputs[i].audio_type == 0) + break; + itv->nof_audio_inputs = i; + + if (itv->card->hw_all & IVTV_HW_CX25840) { + itv->vbi.sliced_size = 288; /* multiple of 16, real size = 284 */ + } else { + itv->vbi.sliced_size = 64; /* multiple of 16, real size = 52 */ + } + + /* Find tuner input */ + for (i = 0; i < itv->nof_inputs; i++) { + if (itv->card->video_inputs[i].video_type == + IVTV_CARD_INPUT_VID_TUNER) + break; + } + if (i == itv->nof_inputs) + i = 0; + itv->active_input = i; + itv->audio_input = itv->card->video_inputs[i].audio_index; +} + +static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + u16 cmd; + unsigned char pci_latency; + + IVTV_DEBUG_INFO("Enabling pci device\n"); + + if (pci_enable_device(pdev)) { + IVTV_ERR("Can't enable device!\n"); + return -EIO; + } + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + IVTV_ERR("No suitable DMA available.\n"); + return -EIO; + } + if (!request_mem_region(itv->base_addr, IVTV_ENCODER_SIZE, "ivtv encoder")) { + IVTV_ERR("Cannot request encoder memory region.\n"); + return -EIO; + } + + if (!request_mem_region(itv->base_addr + IVTV_REG_OFFSET, + IVTV_REG_SIZE, "ivtv registers")) { + IVTV_ERR("Cannot request register memory region.\n"); + release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); + return -EIO; + } + + if (itv->has_cx23415 && + !request_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, + IVTV_DECODER_SIZE, "ivtv decoder")) { + IVTV_ERR("Cannot request decoder memory region.\n"); + release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); + release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); + return -EIO; + } + + /* Check for bus mastering */ + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + if (!(cmd & PCI_COMMAND_MASTER)) { + IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n"); + pci_set_master(pdev); + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + if (!(cmd & PCI_COMMAND_MASTER)) { + IVTV_ERR("Bus Mastering is not enabled\n"); + return -ENXIO; + } + } + IVTV_DEBUG_INFO("Bus Mastering Enabled.\n"); + + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); + + if (pci_latency < 64 && ivtv_pci_latency) { + IVTV_INFO("Unreasonably low latency timer, " + "setting to 64 (was %d)\n", pci_latency); + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); + } + /* This config space value relates to DMA latencies. The + default value 0x8080 is too low however and will lead + to DMA errors. 0xffff is the max value which solves + these problems. */ + pci_write_config_dword(pdev, 0x40, 0xffff); + + IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, " + "irq: %d, latency: %d, memory: 0x%llx\n", + pdev->device, pdev->revision, pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + pdev->irq, pci_latency, (u64)itv->base_addr); + + return 0; +} + +static void ivtv_load_and_init_modules(struct ivtv *itv) +{ + u32 hw = itv->card->hw_all; + unsigned i; + + /* check which i2c devices are actually found */ + for (i = 0; i < 32; i++) { + u32 device = 1 << i; + + if (!(device & hw)) + continue; + if (device == IVTV_HW_GPIO || device == IVTV_HW_TVEEPROM) { + /* GPIO and TVEEPROM do not use i2c probing */ + itv->hw_flags |= device; + continue; + } + if (ivtv_i2c_register(itv, i) == 0) + itv->hw_flags |= device; + } + + /* probe for legacy IR controllers that aren't in card definitions */ + if ((itv->hw_flags & IVTV_HW_IR_ANY) == 0) + ivtv_i2c_new_ir_legacy(itv); + + if (itv->card->hw_all & IVTV_HW_CX25840) + itv->sd_video = ivtv_find_hw(itv, IVTV_HW_CX25840); + else if (itv->card->hw_all & IVTV_HW_SAA717X) + itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA717X); + else if (itv->card->hw_all & IVTV_HW_SAA7114) + itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7114); + else + itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7115); + itv->sd_audio = ivtv_find_hw(itv, itv->card->hw_audio_ctrl); + itv->sd_muxer = ivtv_find_hw(itv, itv->card->hw_muxer); + + hw = itv->hw_flags; + + if (itv->card->type == IVTV_CARD_CX23416GYC) { + /* Several variations of this card exist, detect which card + type should be used. */ + if ((hw & (IVTV_HW_UPD64031A | IVTV_HW_UPD6408X)) == 0) + itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS); + else if ((hw & IVTV_HW_UPD64031A) == 0) + itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR); + } + else if (itv->card->type == IVTV_CARD_GV_MVPRX || + itv->card->type == IVTV_CARD_GV_MVPRX2E) { + /* The crystal frequency of GVMVPRX is 24.576MHz */ + v4l2_subdev_call(itv->sd_video, video, s_crystal_freq, + SAA7115_FREQ_24_576_MHZ, SAA7115_FREQ_FL_UCGC); + } + + if (hw & IVTV_HW_CX25840) { + itv->vbi.raw_decoder_line_size = 1444; + itv->vbi.raw_decoder_sav_odd_field = 0x20; + itv->vbi.raw_decoder_sav_even_field = 0x60; + itv->vbi.sliced_decoder_line_size = 272; + itv->vbi.sliced_decoder_sav_odd_field = 0xB0; + itv->vbi.sliced_decoder_sav_even_field = 0xF0; + } + + if (hw & IVTV_HW_SAA711X) { + struct v4l2_dbg_chip_ident v; + + /* determine the exact saa711x model */ + itv->hw_flags &= ~IVTV_HW_SAA711X; + + v.match.type = V4L2_CHIP_MATCH_I2C_DRIVER; + strlcpy(v.match.name, "saa7115", sizeof(v.match.name)); + ivtv_call_hw(itv, IVTV_HW_SAA711X, core, g_chip_ident, &v); + if (v.ident == V4L2_IDENT_SAA7114) { + itv->hw_flags |= IVTV_HW_SAA7114; + /* VBI is not yet supported by the saa7114 driver. */ + itv->v4l2_cap &= ~(V4L2_CAP_SLICED_VBI_CAPTURE|V4L2_CAP_VBI_CAPTURE); + } else { + itv->hw_flags |= IVTV_HW_SAA7115; + } + itv->vbi.raw_decoder_line_size = 1443; + itv->vbi.raw_decoder_sav_odd_field = 0x25; + itv->vbi.raw_decoder_sav_even_field = 0x62; + itv->vbi.sliced_decoder_line_size = 51; + itv->vbi.sliced_decoder_sav_odd_field = 0xAB; + itv->vbi.sliced_decoder_sav_even_field = 0xEC; + } + + if (hw & IVTV_HW_SAA717X) { + itv->vbi.raw_decoder_line_size = 1443; + itv->vbi.raw_decoder_sav_odd_field = 0x25; + itv->vbi.raw_decoder_sav_even_field = 0x62; + itv->vbi.sliced_decoder_line_size = 51; + itv->vbi.sliced_decoder_sav_odd_field = 0xAB; + itv->vbi.sliced_decoder_sav_even_field = 0xEC; + } +} + +static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + int retval = 0; + int vbi_buf_size; + struct ivtv *itv; + + itv = kzalloc(sizeof(struct ivtv), GFP_ATOMIC); + if (itv == NULL) + return -ENOMEM; + itv->pdev = pdev; + itv->instance = v4l2_device_set_name(&itv->v4l2_dev, "ivtv", + &ivtv_instance); + + retval = v4l2_device_register(&pdev->dev, &itv->v4l2_dev); + if (retval) { + kfree(itv); + return retval; + } + IVTV_INFO("Initializing card %d\n", itv->instance); + + ivtv_process_options(itv); + if (itv->options.cardtype == -1) { + retval = -ENODEV; + goto err; + } + if (ivtv_init_struct1(itv)) { + retval = -ENOMEM; + goto err; + } + retval = cx2341x_handler_init(&itv->cxhdl, 50); + if (retval) + goto err; + itv->v4l2_dev.ctrl_handler = &itv->cxhdl.hdl; + itv->cxhdl.ops = &ivtv_cxhdl_ops; + itv->cxhdl.priv = itv; + itv->cxhdl.func = ivtv_api_func; + + IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr); + + /* PCI Device Setup */ + retval = ivtv_setup_pci(itv, pdev, pci_id); + if (retval == -EIO) + goto free_worker; + if (retval == -ENXIO) + goto free_mem; + + /* map io memory */ + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); + itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET, + IVTV_ENCODER_SIZE); + if (!itv->enc_mem) { + IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 " + "encoder memory\n"); + IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of " + "vmalloc address space for this window\n"); + IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); + IVTV_ERR("Use the vmalloc= kernel command line option to set " + "VmallocTotal to a larger value\n"); + retval = -ENOMEM; + goto free_mem; + } + + if (itv->has_cx23415) { + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); + itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET, + IVTV_DECODER_SIZE); + if (!itv->dec_mem) { + IVTV_ERR("ioremap failed. Can't get a window into " + "CX23415 decoder memory\n"); + IVTV_ERR("Each capture card with a CX23415 needs 8 MB " + "of vmalloc address space for this window\n"); + IVTV_ERR("Check the output of 'grep Vmalloc " + "/proc/meminfo'\n"); + IVTV_ERR("Use the vmalloc= kernel command line option " + "to set VmallocTotal to a larger value\n"); + retval = -ENOMEM; + goto free_mem; + } + } + else { + itv->dec_mem = itv->enc_mem; + } + + /* map registers memory */ + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); + itv->reg_mem = + ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); + if (!itv->reg_mem) { + IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 " + "register space\n"); + IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of " + "vmalloc address space for this window\n"); + IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); + IVTV_ERR("Use the vmalloc= kernel command line option to set " + "VmallocTotal to a larger value\n"); + retval = -ENOMEM; + goto free_io; + } + + retval = ivtv_gpio_init(itv); + if (retval) + goto free_io; + + /* active i2c */ + IVTV_DEBUG_INFO("activating i2c...\n"); + if (init_ivtv_i2c(itv)) { + IVTV_ERR("Could not initialize i2c\n"); + goto free_io; + } + + if (itv->card->hw_all & IVTV_HW_TVEEPROM) { + /* Based on the model number the cardtype may be changed. + The PCI IDs are not always reliable. */ + ivtv_process_eeprom(itv); + } + if (itv->card->comment) + IVTV_INFO("%s", itv->card->comment); + if (itv->card->v4l2_capabilities == 0) { + /* card was detected but is not supported */ + retval = -ENODEV; + goto free_i2c; + } + + if (itv->std == 0) { + itv->std = V4L2_STD_NTSC_M; + } + + if (itv->options.tuner == -1) { + int i; + + for (i = 0; i < IVTV_CARD_MAX_TUNERS; i++) { + if ((itv->std & itv->card->tuners[i].std) == 0) + continue; + itv->options.tuner = itv->card->tuners[i].tuner; + break; + } + } + /* if no tuner was found, then pick the first tuner in the card list */ + if (itv->options.tuner == -1 && itv->card->tuners[0].std) { + itv->std = itv->card->tuners[0].std; + if (itv->std & V4L2_STD_PAL) + itv->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H; + else if (itv->std & V4L2_STD_NTSC) + itv->std = V4L2_STD_NTSC_M; + else if (itv->std & V4L2_STD_SECAM) + itv->std = V4L2_STD_SECAM_L; + itv->options.tuner = itv->card->tuners[0].tuner; + } + if (itv->options.radio == -1) + itv->options.radio = (itv->card->radio_input.audio_type != 0); + + /* The card is now fully identified, continue with card-specific + initialization. */ + ivtv_init_struct2(itv); + + ivtv_load_and_init_modules(itv); + + if (itv->std & V4L2_STD_525_60) { + itv->is_60hz = 1; + itv->is_out_60hz = 1; + } else { + itv->is_50hz = 1; + itv->is_out_50hz = 1; + } + + itv->yuv_info.osd_full_w = 720; + itv->yuv_info.osd_full_h = itv->is_out_50hz ? 576 : 480; + itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w; + itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h; + + cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz); + + itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000; + itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200; + itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_MPG] = 0x10000; + itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = 0x10000; + itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = 0x08000; + + /* Setup VBI Raw Size. Should be big enough to hold PAL. + It is possible to switch between PAL and NTSC, so we need to + take the largest size here. */ + /* 1456 is multiple of 16, real size = 1444 */ + itv->vbi.raw_size = 1456; + /* We use a buffer size of 1/2 of the total size needed for a + frame. This is actually very useful, since we now receive + a field at a time and that makes 'compressing' the raw data + down to size by stripping off the SAV codes a lot easier. + Note: having two different buffer sizes prevents standard + switching on the fly. We need to find a better solution... */ + vbi_buf_size = itv->vbi.raw_size * (itv->is_60hz ? 24 : 36) / 2; + itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_VBI] = vbi_buf_size; + itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_VBI] = sizeof(struct v4l2_sliced_vbi_data) * 36; + + if (itv->options.radio > 0) + itv->v4l2_cap |= V4L2_CAP_RADIO; + + if (itv->options.tuner > -1) { + struct tuner_setup setup; + + setup.addr = ADDR_UNSET; + setup.type = itv->options.tuner; + setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */ + if (itv->options.radio > 0) + setup.mode_mask |= T_RADIO; + setup.tuner_callback = (setup.type == TUNER_XC2028) ? + ivtv_reset_tuner_gpio : NULL; + ivtv_call_all(itv, tuner, s_type_addr, &setup); + if (setup.type == TUNER_XC2028) { + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + }; + struct v4l2_priv_tun_config cfg = { + .tuner = itv->options.tuner, + .priv = &ctrl, + }; + ivtv_call_all(itv, tuner, s_config, &cfg); + } + } + + /* The tuner is fixed to the standard. The other inputs (e.g. S-Video) + are not. */ + itv->tuner_std = itv->std; + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + struct v4l2_ctrl_handler *hdl = itv->v4l2_dev.ctrl_handler; + + itv->ctrl_pts = v4l2_ctrl_new_std(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_VIDEO_DEC_PTS, 0, 0, 0, 0); + itv->ctrl_frame = v4l2_ctrl_new_std(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_VIDEO_DEC_FRAME, 0, 0, 0, 0); + /* Note: V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO is not supported, + mask that menu item. */ + itv->ctrl_audio_playback = + v4l2_ctrl_new_std_menu(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO, + 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO); + itv->ctrl_audio_multilingual_playback = + v4l2_ctrl_new_std_menu(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO, + 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT); + if (hdl->error) { + retval = hdl->error; + goto free_i2c; + } + v4l2_ctrl_cluster(2, &itv->ctrl_pts); + v4l2_ctrl_cluster(2, &itv->ctrl_audio_playback); + ivtv_call_all(itv, video, s_std_output, itv->std); + /* Turn off the output signal. The mpeg decoder is not yet + active so without this you would get a green image until the + mpeg decoder becomes active. */ + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0); + } + + /* clear interrupt mask, effectively disabling interrupts */ + ivtv_set_irq_mask(itv, 0xffffffff); + + /* Register IRQ */ + retval = request_irq(itv->pdev->irq, ivtv_irq_handler, + IRQF_SHARED | IRQF_DISABLED, itv->v4l2_dev.name, (void *)itv); + if (retval) { + IVTV_ERR("Failed to register irq %d\n", retval); + goto free_i2c; + } + + retval = ivtv_streams_setup(itv); + if (retval) { + IVTV_ERR("Error %d setting up streams\n", retval); + goto free_irq; + } + retval = ivtv_streams_register(itv); + if (retval) { + IVTV_ERR("Error %d registering devices\n", retval); + goto free_streams; + } + IVTV_INFO("Initialized card: %s\n", itv->card_name); + + /* Load ivtv submodules (ivtv-alsa) */ + request_modules(itv); + return 0; + +free_streams: + ivtv_streams_cleanup(itv, 1); +free_irq: + free_irq(itv->pdev->irq, (void *)itv); +free_i2c: + v4l2_ctrl_handler_free(&itv->cxhdl.hdl); + exit_ivtv_i2c(itv); +free_io: + ivtv_iounmap(itv); +free_mem: + release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); + release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); + if (itv->has_cx23415) + release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); +free_worker: + kthread_stop(itv->irq_worker_task); +err: + if (retval == 0) + retval = -ENODEV; + IVTV_ERR("Error %d on initialization\n", retval); + + v4l2_device_unregister(&itv->v4l2_dev); + kfree(itv); + return retval; +} + +int ivtv_init_on_first_open(struct ivtv *itv) +{ + struct v4l2_frequency vf; + /* Needed to call ioctls later */ + struct ivtv_open_id fh; + int fw_retry_count = 3; + int video_input; + + fh.itv = itv; + fh.type = IVTV_ENC_STREAM_TYPE_MPG; + + if (test_bit(IVTV_F_I_FAILED, &itv->i_flags)) + return -ENXIO; + + if (test_and_set_bit(IVTV_F_I_INITED, &itv->i_flags)) + return 0; + + while (--fw_retry_count > 0) { + /* load firmware */ + if (ivtv_firmware_init(itv) == 0) + break; + if (fw_retry_count > 1) + IVTV_WARN("Retry loading firmware\n"); + } + + if (fw_retry_count == 0) { + set_bit(IVTV_F_I_FAILED, &itv->i_flags); + return -ENXIO; + } + + /* Try and get firmware versions */ + IVTV_DEBUG_INFO("Getting firmware version..\n"); + ivtv_firmware_versions(itv); + + if (itv->card->hw_all & IVTV_HW_CX25840) + v4l2_subdev_call(itv->sd_video, core, load_fw); + + vf.tuner = 0; + vf.type = V4L2_TUNER_ANALOG_TV; + vf.frequency = 6400; /* the tuner 'baseline' frequency */ + + /* Set initial frequency. For PAL/SECAM broadcasts no + 'default' channel exists AFAIK. */ + if (itv->std == V4L2_STD_NTSC_M_JP) { + vf.frequency = 1460; /* ch. 1 91250*16/1000 */ + } + else if (itv->std & V4L2_STD_NTSC_M) { + vf.frequency = 1076; /* ch. 4 67250*16/1000 */ + } + + video_input = itv->active_input; + itv->active_input++; /* Force update of input */ + ivtv_s_input(NULL, &fh, video_input); + + /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code + in one place. */ + itv->std++; /* Force full standard initialization */ + itv->std_out = itv->std; + ivtv_s_frequency(NULL, &fh, &vf); + + if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) { + /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes + the mpeg decoder so now the saa7127 receives a proper + signal. */ + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1); + ivtv_init_mpeg_decoder(itv); + } + + /* On a cx23416 this seems to be able to enable DMA to the chip? */ + if (!itv->has_cx23415) + write_reg_sync(0x03, IVTV_REG_DMACONTROL); + + ivtv_s_std_enc(itv, itv->tuner_std); + + /* Default interrupts enabled. For the PVR350 this includes the + decoder VSYNC interrupt, which is always on. It is not only used + during decoding but also by the OSD. + Some old PVR250 cards had a cx23415, so testing for that is too + general. Instead test if the card has video output capability. */ + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC); + ivtv_set_osd_alpha(itv); + ivtv_s_std_dec(itv, itv->tuner_std); + } else { + ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT); + } + + /* Setup initial controls */ + cx2341x_handler_setup(&itv->cxhdl); + return 0; +} + +static void ivtv_remove(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct ivtv *itv = to_ivtv(v4l2_dev); + int i; + + IVTV_DEBUG_INFO("Removing card\n"); + + flush_request_modules(itv); + + if (test_bit(IVTV_F_I_INITED, &itv->i_flags)) { + /* Stop all captures */ + IVTV_DEBUG_INFO("Stopping all streams\n"); + if (atomic_read(&itv->capturing) > 0) + ivtv_stop_all_captures(itv); + + /* Stop all decoding */ + IVTV_DEBUG_INFO("Stopping decoding\n"); + + /* Turn off the TV-out */ + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0); + if (atomic_read(&itv->decoding) > 0) { + int type; + + if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) + type = IVTV_DEC_STREAM_TYPE_YUV; + else + type = IVTV_DEC_STREAM_TYPE_MPG; + ivtv_stop_v4l2_decode_stream(&itv->streams[type], + V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY, 0); + } + ivtv_halt_firmware(itv); + } + + /* Interrupts */ + ivtv_set_irq_mask(itv, 0xffffffff); + del_timer_sync(&itv->dma_timer); + + /* Kill irq worker */ + flush_kthread_worker(&itv->irq_worker); + kthread_stop(itv->irq_worker_task); + + ivtv_streams_cleanup(itv, 1); + ivtv_udma_free(itv); + + v4l2_ctrl_handler_free(&itv->cxhdl.hdl); + + exit_ivtv_i2c(itv); + + free_irq(itv->pdev->irq, (void *)itv); + ivtv_iounmap(itv); + + release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); + release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); + if (itv->has_cx23415) + release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); + + pci_disable_device(itv->pdev); + for (i = 0; i < IVTV_VBI_FRAMES; i++) + kfree(itv->vbi.sliced_mpeg_data[i]); + + printk(KERN_INFO "ivtv: Removed %s\n", itv->card_name); + + v4l2_device_unregister(&itv->v4l2_dev); + kfree(itv); +} + +/* define a pci_driver for card detection */ +static struct pci_driver ivtv_pci_driver = { + .name = "ivtv", + .id_table = ivtv_pci_tbl, + .probe = ivtv_probe, + .remove = ivtv_remove, +}; + +static int __init module_start(void) +{ + printk(KERN_INFO "ivtv: Start initialization, version %s\n", IVTV_VERSION); + + /* Validate parameters */ + if (ivtv_first_minor < 0 || ivtv_first_minor >= IVTV_MAX_CARDS) { + printk(KERN_ERR "ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n", + IVTV_MAX_CARDS - 1); + return -1; + } + + if (ivtv_debug < 0 || ivtv_debug > 2047) { + ivtv_debug = 0; + printk(KERN_INFO "ivtv: Debug value must be >= 0 and <= 2047\n"); + } + + if (pci_register_driver(&ivtv_pci_driver)) { + printk(KERN_ERR "ivtv: Error detecting PCI card\n"); + return -ENODEV; + } + printk(KERN_INFO "ivtv: End initialization\n"); + return 0; +} + +static void __exit module_cleanup(void) +{ + pci_unregister_driver(&ivtv_pci_driver); +} + +/* Note: These symbols are exported because they are used by the ivtvfb + framebuffer module and an infrared module for the IR-blaster. */ +EXPORT_SYMBOL(ivtv_set_irq_mask); +EXPORT_SYMBOL(ivtv_api); +EXPORT_SYMBOL(ivtv_vapi); +EXPORT_SYMBOL(ivtv_vapi_result); +EXPORT_SYMBOL(ivtv_clear_irq_mask); +EXPORT_SYMBOL(ivtv_debug); +#ifdef CONFIG_VIDEO_ADV_DEBUG +EXPORT_SYMBOL(ivtv_fw_debug); +#endif +EXPORT_SYMBOL(ivtv_reset_ir_gpio); +EXPORT_SYMBOL(ivtv_udma_setup); +EXPORT_SYMBOL(ivtv_udma_unmap); +EXPORT_SYMBOL(ivtv_udma_alloc); +EXPORT_SYMBOL(ivtv_udma_prepare); +EXPORT_SYMBOL(ivtv_init_on_first_open); +EXPORT_SYMBOL(ivtv_firmware_check); + +module_init(module_start); +module_exit(module_cleanup); diff --git a/drivers/media/pci/ivtv/ivtv-driver.h b/drivers/media/pci/ivtv/ivtv-driver.h new file mode 100644 index 00000000..bc309f42 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-driver.h @@ -0,0 +1,850 @@ +/* + ivtv driver internal defines and structures + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_DRIVER_H +#define IVTV_DRIVER_H + +/* Internal header for ivtv project: + * Driver for the cx23415/6 chip. + * Author: Kevin Thayer (nufan_wfk at yahoo.com) + * License: GPL + * http://www.ivtvdriver.org + * + * ----- + * MPG600/MPG160 support by T.Adachi + * and Takeru KOMORIYA + * + * AVerMedia M179 GPIO info by Chris Pinkham + * using information provided by Jiun-Kuei Jung @ AVerMedia. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Memory layout */ +#define IVTV_ENCODER_OFFSET 0x00000000 +#define IVTV_ENCODER_SIZE 0x00800000 /* Total size is 0x01000000, but only first half is used */ +#define IVTV_DECODER_OFFSET 0x01000000 +#define IVTV_DECODER_SIZE 0x00800000 /* Total size is 0x01000000, but only first half is used */ +#define IVTV_REG_OFFSET 0x02000000 +#define IVTV_REG_SIZE 0x00010000 + +/* Maximum ivtv driver instances. Some people have a huge number of + capture cards, so set this to a high value. */ +#define IVTV_MAX_CARDS 32 + +#define IVTV_ENC_STREAM_TYPE_MPG 0 +#define IVTV_ENC_STREAM_TYPE_YUV 1 +#define IVTV_ENC_STREAM_TYPE_VBI 2 +#define IVTV_ENC_STREAM_TYPE_PCM 3 +#define IVTV_ENC_STREAM_TYPE_RAD 4 +#define IVTV_DEC_STREAM_TYPE_MPG 5 +#define IVTV_DEC_STREAM_TYPE_VBI 6 +#define IVTV_DEC_STREAM_TYPE_VOUT 7 +#define IVTV_DEC_STREAM_TYPE_YUV 8 +#define IVTV_MAX_STREAMS 9 + +#define IVTV_DMA_SG_OSD_ENT (2883584/PAGE_SIZE) /* sg entities */ + +/* DMA Registers */ +#define IVTV_REG_DMAXFER (0x0000) +#define IVTV_REG_DMASTATUS (0x0004) +#define IVTV_REG_DECDMAADDR (0x0008) +#define IVTV_REG_ENCDMAADDR (0x000c) +#define IVTV_REG_DMACONTROL (0x0010) +#define IVTV_REG_IRQSTATUS (0x0040) +#define IVTV_REG_IRQMASK (0x0048) + +/* Setup Registers */ +#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8) +#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC) +#define IVTV_REG_DEC_SDRAM_REFRESH (0x08F8) +#define IVTV_REG_DEC_SDRAM_PRECHARGE (0x08FC) +#define IVTV_REG_VDM (0x2800) +#define IVTV_REG_AO (0x2D00) +#define IVTV_REG_BYTEFLUSH (0x2D24) +#define IVTV_REG_SPU (0x9050) +#define IVTV_REG_HW_BLOCKS (0x9054) +#define IVTV_REG_VPU (0x9058) +#define IVTV_REG_APU (0xA064) + +/* Other registers */ +#define IVTV_REG_DEC_LINE_FIELD (0x28C0) + +/* debugging */ +extern int ivtv_debug; +#ifdef CONFIG_VIDEO_ADV_DEBUG +extern int ivtv_fw_debug; +#endif + +#define IVTV_DBGFLG_WARN (1 << 0) +#define IVTV_DBGFLG_INFO (1 << 1) +#define IVTV_DBGFLG_MB (1 << 2) +#define IVTV_DBGFLG_IOCTL (1 << 3) +#define IVTV_DBGFLG_FILE (1 << 4) +#define IVTV_DBGFLG_DMA (1 << 5) +#define IVTV_DBGFLG_IRQ (1 << 6) +#define IVTV_DBGFLG_DEC (1 << 7) +#define IVTV_DBGFLG_YUV (1 << 8) +#define IVTV_DBGFLG_I2C (1 << 9) +/* Flag to turn on high volume debugging */ +#define IVTV_DBGFLG_HIGHVOL (1 << 10) + +#define IVTV_DEBUG(x, type, fmt, args...) \ + do { \ + if ((x) & ivtv_debug) \ + v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args); \ + } while (0) +#define IVTV_DEBUG_WARN(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_WARN, "warn", fmt , ## args) +#define IVTV_DEBUG_INFO(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_INFO, "info", fmt , ## args) +#define IVTV_DEBUG_MB(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_MB, "mb", fmt , ## args) +#define IVTV_DEBUG_DMA(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_DMA, "dma", fmt , ## args) +#define IVTV_DEBUG_IOCTL(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args) +#define IVTV_DEBUG_FILE(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_FILE, "file", fmt , ## args) +#define IVTV_DEBUG_I2C(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_I2C, "i2c", fmt , ## args) +#define IVTV_DEBUG_IRQ(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IRQ, "irq", fmt , ## args) +#define IVTV_DEBUG_DEC(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_DEC, "dec", fmt , ## args) +#define IVTV_DEBUG_YUV(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_YUV, "yuv", fmt , ## args) + +#define IVTV_DEBUG_HIGH_VOL(x, type, fmt, args...) \ + do { \ + if (((x) & ivtv_debug) && (ivtv_debug & IVTV_DBGFLG_HIGHVOL)) \ + v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args); \ + } while (0) +#define IVTV_DEBUG_HI_WARN(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_WARN, "warn", fmt , ## args) +#define IVTV_DEBUG_HI_INFO(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_INFO, "info", fmt , ## args) +#define IVTV_DEBUG_HI_MB(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_MB, "mb", fmt , ## args) +#define IVTV_DEBUG_HI_DMA(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DMA, "dma", fmt , ## args) +#define IVTV_DEBUG_HI_IOCTL(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args) +#define IVTV_DEBUG_HI_FILE(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_FILE, "file", fmt , ## args) +#define IVTV_DEBUG_HI_I2C(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_I2C, "i2c", fmt , ## args) +#define IVTV_DEBUG_HI_IRQ(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IRQ, "irq", fmt , ## args) +#define IVTV_DEBUG_HI_DEC(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DEC, "dec", fmt , ## args) +#define IVTV_DEBUG_HI_YUV(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_YUV, "yuv", fmt , ## args) + +/* Standard kernel messages */ +#define IVTV_ERR(fmt, args...) v4l2_err(&itv->v4l2_dev, fmt , ## args) +#define IVTV_WARN(fmt, args...) v4l2_warn(&itv->v4l2_dev, fmt , ## args) +#define IVTV_INFO(fmt, args...) v4l2_info(&itv->v4l2_dev, fmt , ## args) + +/* output modes (cx23415 only) */ +#define OUT_NONE 0 +#define OUT_MPG 1 +#define OUT_YUV 2 +#define OUT_UDMA_YUV 3 +#define OUT_PASSTHROUGH 4 + +#define IVTV_MAX_PGM_INDEX (400) + +/* Default I2C SCL period in microseconds */ +#define IVTV_DEFAULT_I2C_CLOCK_PERIOD 20 + +struct ivtv_options { + int kilobytes[IVTV_MAX_STREAMS]; /* size in kilobytes of each stream */ + int cardtype; /* force card type on load */ + int tuner; /* set tuner on load */ + int radio; /* enable/disable radio */ + int newi2c; /* new I2C algorithm */ + int i2c_clock_period; /* period of SCL for I2C bus */ +}; + +/* ivtv-specific mailbox template */ +struct ivtv_mailbox { + u32 flags; + u32 cmd; + u32 retval; + u32 timeout; + u32 data[CX2341X_MBOX_MAX_DATA]; +}; + +struct ivtv_api_cache { + unsigned long last_jiffies; /* when last command was issued */ + u32 data[CX2341X_MBOX_MAX_DATA]; /* last sent api data */ +}; + +struct ivtv_mailbox_data { + volatile struct ivtv_mailbox __iomem *mbox; + /* Bits 0-2 are for the encoder mailboxes, 0-1 are for the decoder mailboxes. + If the bit is set, then the corresponding mailbox is in use by the driver. */ + unsigned long busy; + u8 max_mbox; +}; + +/* per-buffer bit flags */ +#define IVTV_F_B_NEED_BUF_SWAP (1 << 0) /* this buffer should be byte swapped */ + +/* per-stream, s_flags */ +#define IVTV_F_S_DMA_PENDING 0 /* this stream has pending DMA */ +#define IVTV_F_S_DMA_HAS_VBI 1 /* the current DMA request also requests VBI data */ +#define IVTV_F_S_NEEDS_DATA 2 /* this decoding stream needs more data */ + +#define IVTV_F_S_CLAIMED 3 /* this stream is claimed */ +#define IVTV_F_S_STREAMING 4 /* the fw is decoding/encoding this stream */ +#define IVTV_F_S_INTERNAL_USE 5 /* this stream is used internally (sliced VBI processing) */ +#define IVTV_F_S_PASSTHROUGH 6 /* this stream is in passthrough mode */ +#define IVTV_F_S_STREAMOFF 7 /* signal end of stream EOS */ +#define IVTV_F_S_APPL_IO 8 /* this stream is used read/written by an application */ + +#define IVTV_F_S_PIO_PENDING 9 /* this stream has pending PIO */ +#define IVTV_F_S_PIO_HAS_VBI 1 /* the current PIO request also requests VBI data */ + +/* per-ivtv, i_flags */ +#define IVTV_F_I_DMA 0 /* DMA in progress */ +#define IVTV_F_I_UDMA 1 /* UDMA in progress */ +#define IVTV_F_I_UDMA_PENDING 2 /* UDMA pending */ +#define IVTV_F_I_SPEED_CHANGE 3 /* a speed change is in progress */ +#define IVTV_F_I_EOS 4 /* end of encoder stream reached */ +#define IVTV_F_I_RADIO_USER 5 /* the radio tuner is selected */ +#define IVTV_F_I_DIG_RST 6 /* reset digitizer */ +#define IVTV_F_I_DEC_YUV 7 /* YUV instead of MPG is being decoded */ +#define IVTV_F_I_UPDATE_CC 9 /* CC should be updated */ +#define IVTV_F_I_UPDATE_WSS 10 /* WSS should be updated */ +#define IVTV_F_I_UPDATE_VPS 11 /* VPS should be updated */ +#define IVTV_F_I_DECODING_YUV 12 /* this stream is YUV frame decoding */ +#define IVTV_F_I_ENC_PAUSED 13 /* the encoder is paused */ +#define IVTV_F_I_VALID_DEC_TIMINGS 14 /* last_dec_timing is valid */ +#define IVTV_F_I_HAVE_WORK 15 /* used in the interrupt handler: there is work to be done */ +#define IVTV_F_I_WORK_HANDLER_VBI 16 /* there is work to be done for VBI */ +#define IVTV_F_I_WORK_HANDLER_YUV 17 /* there is work to be done for YUV */ +#define IVTV_F_I_WORK_HANDLER_PIO 18 /* there is work to be done for PIO */ +#define IVTV_F_I_PIO 19 /* PIO in progress */ +#define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */ +#define IVTV_F_I_INITED 21 /* set after first open */ +#define IVTV_F_I_FAILED 22 /* set if first open failed */ +#define IVTV_F_I_WORK_HANDLER_PCM 23 /* there is work to be done for PCM */ + +/* Event notifications */ +#define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */ +#define IVTV_F_I_EV_VSYNC 29 /* VSYNC event */ +#define IVTV_F_I_EV_VSYNC_FIELD 30 /* VSYNC event field (0 = first, 1 = second field) */ +#define IVTV_F_I_EV_VSYNC_ENABLED 31 /* VSYNC event enabled */ + +/* Scatter-Gather array element, used in DMA transfers */ +struct ivtv_sg_element { + __le32 src; + __le32 dst; + __le32 size; +}; + +struct ivtv_sg_host_element { + u32 src; + u32 dst; + u32 size; +}; + +struct ivtv_user_dma { + struct mutex lock; + int page_count; + struct page *map[IVTV_DMA_SG_OSD_ENT]; + /* Needed when dealing with highmem userspace buffers */ + struct page *bouncemap[IVTV_DMA_SG_OSD_ENT]; + + /* Base Dev SG Array for cx23415/6 */ + struct ivtv_sg_element SGarray[IVTV_DMA_SG_OSD_ENT]; + dma_addr_t SG_handle; + int SG_length; + + /* SG List of Buffers */ + struct scatterlist SGlist[IVTV_DMA_SG_OSD_ENT]; +}; + +struct ivtv_dma_page_info { + unsigned long uaddr; + unsigned long first; + unsigned long last; + unsigned int offset; + unsigned int tail; + int page_count; +}; + +struct ivtv_buffer { + struct list_head list; + dma_addr_t dma_handle; + unsigned short b_flags; + unsigned short dma_xfer_cnt; + char *buf; + u32 bytesused; + u32 readpos; +}; + +struct ivtv_queue { + struct list_head list; /* the list of buffers in this queue */ + u32 buffers; /* number of buffers in this queue */ + u32 length; /* total number of bytes of available buffer space */ + u32 bytesused; /* total number of bytes used in this queue */ +}; + +struct ivtv; /* forward reference */ + +struct ivtv_stream { + /* These first four fields are always set, even if the stream + is not actually created. */ + struct video_device *vdev; /* NULL when stream not created */ + struct ivtv *itv; /* for ease of use */ + const char *name; /* name of the stream */ + int type; /* stream type */ + u32 caps; /* V4L2 capabilities */ + + struct v4l2_fh *fh; /* pointer to the streaming filehandle */ + spinlock_t qlock; /* locks access to the queues */ + unsigned long s_flags; /* status flags, see above */ + int dma; /* can be PCI_DMA_TODEVICE, PCI_DMA_FROMDEVICE or PCI_DMA_NONE */ + u32 pending_offset; + u32 pending_backup; + u64 pending_pts; + + u32 dma_offset; + u32 dma_backup; + u64 dma_pts; + + int subtype; + wait_queue_head_t waitq; + u32 dma_last_offset; + + /* Buffer Stats */ + u32 buffers; + u32 buf_size; + u32 buffers_stolen; + + /* Buffer Queues */ + struct ivtv_queue q_free; /* free buffers */ + struct ivtv_queue q_full; /* full buffers */ + struct ivtv_queue q_io; /* waiting for I/O */ + struct ivtv_queue q_dma; /* waiting for DMA */ + struct ivtv_queue q_predma; /* waiting for DMA */ + + /* DMA xfer counter, buffers belonging to the same DMA + xfer will have the same dma_xfer_cnt. */ + u16 dma_xfer_cnt; + + /* Base Dev SG Array for cx23415/6 */ + struct ivtv_sg_host_element *sg_pending; + struct ivtv_sg_host_element *sg_processing; + struct ivtv_sg_element *sg_dma; + dma_addr_t sg_handle; + int sg_pending_size; + int sg_processing_size; + int sg_processed; + + /* SG List of Buffers */ + struct scatterlist *SGlist; +}; + +struct ivtv_open_id { + struct v4l2_fh fh; + int type; /* stream type */ + int yuv_frames; /* 1: started OUT_UDMA_YUV output mode */ + struct ivtv *itv; +}; + +static inline struct ivtv_open_id *fh2id(struct v4l2_fh *fh) +{ + return container_of(fh, struct ivtv_open_id, fh); +} + +struct yuv_frame_info +{ + u32 update; + s32 src_x; + s32 src_y; + u32 src_w; + u32 src_h; + s32 dst_x; + s32 dst_y; + u32 dst_w; + u32 dst_h; + s32 pan_x; + s32 pan_y; + u32 vis_w; + u32 vis_h; + u32 interlaced_y; + u32 interlaced_uv; + s32 tru_x; + u32 tru_w; + u32 tru_h; + u32 offset_y; + s32 lace_mode; + u32 sync_field; + u32 delay; + u32 interlaced; +}; + +#define IVTV_YUV_MODE_INTERLACED 0x00 +#define IVTV_YUV_MODE_PROGRESSIVE 0x01 +#define IVTV_YUV_MODE_AUTO 0x02 +#define IVTV_YUV_MODE_MASK 0x03 + +#define IVTV_YUV_SYNC_EVEN 0x00 +#define IVTV_YUV_SYNC_ODD 0x04 +#define IVTV_YUV_SYNC_MASK 0x04 + +#define IVTV_YUV_BUFFERS 8 + +struct yuv_playback_info +{ + u32 reg_2834; + u32 reg_2838; + u32 reg_283c; + u32 reg_2840; + u32 reg_2844; + u32 reg_2848; + u32 reg_2854; + u32 reg_285c; + u32 reg_2864; + + u32 reg_2870; + u32 reg_2874; + u32 reg_2890; + u32 reg_2898; + u32 reg_289c; + + u32 reg_2918; + u32 reg_291c; + u32 reg_2920; + u32 reg_2924; + u32 reg_2928; + u32 reg_292c; + u32 reg_2930; + + u32 reg_2934; + + u32 reg_2938; + u32 reg_293c; + u32 reg_2940; + u32 reg_2944; + u32 reg_2948; + u32 reg_294c; + u32 reg_2950; + u32 reg_2954; + u32 reg_2958; + u32 reg_295c; + u32 reg_2960; + u32 reg_2964; + u32 reg_2968; + u32 reg_296c; + + u32 reg_2970; + + int v_filter_1; + int v_filter_2; + int h_filter; + + u8 track_osd; /* Should yuv output track the OSD size & position */ + + u32 osd_x_offset; + u32 osd_y_offset; + + u32 osd_x_pan; + u32 osd_y_pan; + + u32 osd_vis_w; + u32 osd_vis_h; + + u32 osd_full_w; + u32 osd_full_h; + + int decode_height; + + int lace_mode; + int lace_threshold; + int lace_sync_field; + + atomic_t next_dma_frame; + atomic_t next_fill_frame; + + u32 yuv_forced_update; + int update_frame; + + u8 fields_lapsed; /* Counter used when delaying a frame */ + + struct yuv_frame_info new_frame_info[IVTV_YUV_BUFFERS]; + struct yuv_frame_info old_frame_info; + struct yuv_frame_info old_frame_info_args; + + void *blanking_ptr; + dma_addr_t blanking_dmaptr; + + int stream_size; + + u8 draw_frame; /* PVR350 buffer to draw into */ + u8 max_frames_buffered; /* Maximum number of frames to buffer */ + + struct v4l2_rect main_rect; + u32 v4l2_src_w; + u32 v4l2_src_h; + + u8 running; /* Have any frames been displayed */ +}; + +#define IVTV_VBI_FRAMES 32 + +/* VBI data */ +struct vbi_cc { + u8 odd[2]; /* two-byte payload of odd field */ + u8 even[2]; /* two-byte payload of even field */; +}; + +struct vbi_vps { + u8 data[5]; /* five-byte VPS payload */ +}; + +struct vbi_info { + /* VBI general data, does not change during streaming */ + + u32 raw_decoder_line_size; /* raw VBI line size from digitizer */ + u8 raw_decoder_sav_odd_field; /* raw VBI Start Active Video digitizer code of odd field */ + u8 raw_decoder_sav_even_field; /* raw VBI Start Active Video digitizer code of even field */ + u32 sliced_decoder_line_size; /* sliced VBI line size from digitizer */ + u8 sliced_decoder_sav_odd_field; /* sliced VBI Start Active Video digitizer code of odd field */ + u8 sliced_decoder_sav_even_field; /* sliced VBI Start Active Video digitizer code of even field */ + + u32 start[2]; /* start of first VBI line in the odd/even fields */ + u32 count; /* number of VBI lines per field */ + u32 raw_size; /* size of raw VBI line from the digitizer */ + u32 sliced_size; /* size of sliced VBI line from the digitizer */ + + u32 dec_start; /* start in decoder memory of VBI re-insertion buffers */ + u32 enc_start; /* start in encoder memory of VBI capture buffers */ + u32 enc_size; /* size of VBI capture area */ + int fpi; /* number of VBI frames per interrupt */ + + struct v4l2_format in; /* current VBI capture format */ + struct v4l2_sliced_vbi_format *sliced_in; /* convenience pointer to sliced struct in vbi.in union */ + int insert_mpeg; /* if non-zero, then embed VBI data in MPEG stream */ + + /* Raw VBI compatibility hack */ + + u32 frame; /* frame counter hack needed for backwards compatibility + of old VBI software */ + + /* Sliced VBI output data */ + + struct vbi_cc cc_payload[256]; /* sliced VBI CC payload array: it is an array to + prevent dropping CC data if they couldn't be + processed fast enough */ + int cc_payload_idx; /* index in cc_payload */ + u8 cc_missing_cnt; /* counts number of frames without CC for passthrough mode */ + int wss_payload; /* sliced VBI WSS payload */ + u8 wss_missing_cnt; /* counts number of frames without WSS for passthrough mode */ + struct vbi_vps vps_payload; /* sliced VBI VPS payload */ + + /* Sliced VBI capture data */ + + struct v4l2_sliced_vbi_data sliced_data[36]; /* sliced VBI storage for VBI encoder stream */ + struct v4l2_sliced_vbi_data sliced_dec_data[36];/* sliced VBI storage for VBI decoder stream */ + + /* VBI Embedding data */ + + /* Buffer for VBI data inserted into MPEG stream. + The first byte is a dummy byte that's never used. + The next 16 bytes contain the MPEG header for the VBI data, + the remainder is the actual VBI data. + The max size accepted by the MPEG VBI reinsertion turns out + to be 1552 bytes, which happens to be 4 + (1 + 42) * (2 * 18) bytes, + where 4 is a four byte header, 42 is the max sliced VBI payload, 1 is + a single line header byte and 2 * 18 is the number of VBI lines per frame. + + However, it seems that the data must be 1K aligned, so we have to + pad the data until the 1 or 2 K boundary. + + This pointer array will allocate 2049 bytes to store each VBI frame. */ + u8 *sliced_mpeg_data[IVTV_VBI_FRAMES]; + u32 sliced_mpeg_size[IVTV_VBI_FRAMES]; + struct ivtv_buffer sliced_mpeg_buf; /* temporary buffer holding data from sliced_mpeg_data */ + u32 inserted_frame; /* index in sliced_mpeg_size of next sliced data + to be inserted in the MPEG stream */ +}; + +/* forward declaration of struct defined in ivtv-cards.h */ +struct ivtv_card; + +/* Struct to hold info about ivtv cards */ +struct ivtv { + /* General fixed card data */ + struct pci_dev *pdev; /* PCI device */ + const struct ivtv_card *card; /* card information */ + const char *card_name; /* full name of the card */ + const struct ivtv_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */ + u8 has_cx23415; /* 1 if it is a cx23415 based card, 0 for cx23416 */ + u8 pvr150_workaround; /* 1 if the cx25840 needs to workaround a PVR150 bug */ + u8 nof_inputs; /* number of video inputs */ + u8 nof_audio_inputs; /* number of audio inputs */ + u32 v4l2_cap; /* V4L2 capabilities of card */ + u32 hw_flags; /* hardware description of the board */ + v4l2_std_id tuner_std; /* the norm of the card's tuner (fixed) */ + struct v4l2_subdev *sd_video; /* controlling video decoder subdev */ + struct v4l2_subdev *sd_audio; /* controlling audio subdev */ + struct v4l2_subdev *sd_muxer; /* controlling audio muxer subdev */ + resource_size_t base_addr; /* PCI resource base address */ + volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */ + volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */ + volatile void __iomem *reg_mem; /* pointer to mapped registers */ + struct ivtv_options options; /* user options */ + + struct v4l2_device v4l2_dev; + struct cx2341x_handler cxhdl; + struct { + /* PTS/Frame count control cluster */ + struct v4l2_ctrl *ctrl_pts; + struct v4l2_ctrl *ctrl_frame; + }; + struct { + /* Audio Playback control cluster */ + struct v4l2_ctrl *ctrl_audio_playback; + struct v4l2_ctrl *ctrl_audio_multilingual_playback; + }; + struct v4l2_ctrl_handler hdl_gpio; + struct v4l2_subdev sd_gpio; /* GPIO sub-device */ + u16 instance; + + /* High-level state info */ + unsigned long i_flags; /* global ivtv flags */ + u8 is_50hz; /* 1 if the current capture standard is 50 Hz */ + u8 is_60hz /* 1 if the current capture standard is 60 Hz */; + u8 is_out_50hz /* 1 if the current TV output standard is 50 Hz */; + u8 is_out_60hz /* 1 if the current TV output standard is 60 Hz */; + int output_mode; /* decoder output mode: NONE, MPG, YUV, UDMA YUV, passthrough */ + u32 audio_input; /* current audio input */ + u32 active_input; /* current video input */ + u32 active_output; /* current video output */ + v4l2_std_id std; /* current capture TV standard */ + v4l2_std_id std_out; /* current TV output standard */ + u8 audio_stereo_mode; /* decoder setting how to handle stereo MPEG audio */ + u8 audio_bilingual_mode; /* decoder setting how to handle bilingual MPEG audio */ + + /* Locking */ + spinlock_t lock; /* lock access to this struct */ + struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */ + + /* Streams */ + int stream_buf_size[IVTV_MAX_STREAMS]; /* stream buffer size */ + struct ivtv_stream streams[IVTV_MAX_STREAMS]; /* stream data */ + atomic_t capturing; /* count number of active capture streams */ + atomic_t decoding; /* count number of active decoding streams */ + + /* ALSA interface for PCM capture stream */ + struct snd_ivtv_card *alsa; + void (*pcm_announce_callback)(struct snd_ivtv_card *card, u8 *pcm_data, + size_t num_bytes); + + /* Used for ivtv-alsa module loading */ + struct work_struct request_module_wk; + + /* Interrupts & DMA */ + u32 irqmask; /* active interrupts */ + u32 irq_rr_idx; /* round-robin stream index */ + struct kthread_worker irq_worker; /* kthread worker for PIO/YUV/VBI actions */ + struct task_struct *irq_worker_task; /* task for irq_worker */ + struct kthread_work irq_work; /* kthread work entry */ + spinlock_t dma_reg_lock; /* lock access to DMA engine registers */ + int cur_dma_stream; /* index of current stream doing DMA (-1 if none) */ + int cur_pio_stream; /* index of current stream doing PIO (-1 if none) */ + u32 dma_data_req_offset; /* store offset in decoder memory of current DMA request */ + u32 dma_data_req_size; /* store size of current DMA request */ + int dma_retries; /* current DMA retry attempt */ + struct ivtv_user_dma udma; /* user based DMA for OSD */ + struct timer_list dma_timer; /* timer used to catch unfinished DMAs */ + u32 last_vsync_field; /* last seen vsync field */ + wait_queue_head_t dma_waitq; /* wake up when the current DMA is finished */ + wait_queue_head_t eos_waitq; /* wake up when EOS arrives */ + wait_queue_head_t event_waitq; /* wake up when the next decoder event arrives */ + wait_queue_head_t vsync_waitq; /* wake up when the next decoder vsync arrives */ + + + /* Mailbox */ + struct ivtv_mailbox_data enc_mbox; /* encoder mailboxes */ + struct ivtv_mailbox_data dec_mbox; /* decoder mailboxes */ + struct ivtv_api_cache api_cache[256]; /* cached API commands */ + + + /* I2C */ + struct i2c_adapter i2c_adap; + struct i2c_algo_bit_data i2c_algo; + struct i2c_client i2c_client; + int i2c_state; /* i2c bit state */ + struct mutex i2c_bus_lock; /* lock i2c bus */ + + struct IR_i2c_init_data ir_i2c_init_data; + + /* Program Index information */ + u32 pgm_info_offset; /* start of pgm info in encoder memory */ + u32 pgm_info_num; /* number of elements in the pgm cyclic buffer in encoder memory */ + u32 pgm_info_write_idx; /* last index written by the card that was transferred to pgm_info[] */ + u32 pgm_info_read_idx; /* last index in pgm_info read by the application */ + struct v4l2_enc_idx_entry pgm_info[IVTV_MAX_PGM_INDEX]; /* filled from the pgm cyclic buffer on the card */ + + + /* Miscellaneous */ + u32 open_id; /* incremented each time an open occurs, is >= 1 */ + int search_pack_header; /* 1 if ivtv_copy_buf_to_user() is scanning for a pack header (0xba) */ + int speed; /* current playback speed setting */ + u8 speed_mute_audio; /* 1 if audio should be muted when fast forward */ + u64 mpg_data_received; /* number of bytes received from the MPEG stream */ + u64 vbi_data_inserted; /* number of VBI bytes inserted into the MPEG stream */ + u32 last_dec_timing[3]; /* cache last retrieved pts/scr/frame values */ + unsigned long dualwatch_jiffies;/* jiffies value of the previous dualwatch check */ + u32 dualwatch_stereo_mode; /* current detected dualwatch stereo mode */ + + + /* VBI state info */ + struct vbi_info vbi; /* VBI-specific data */ + + + /* YUV playback */ + struct yuv_playback_info yuv_info; /* YUV playback data */ + + + /* OSD support */ + unsigned long osd_video_pbase; + int osd_global_alpha_state; /* 1 = global alpha is on */ + int osd_local_alpha_state; /* 1 = local alpha is on */ + int osd_chroma_key_state; /* 1 = chroma-keying is on */ + u8 osd_global_alpha; /* current global alpha */ + u32 osd_chroma_key; /* current chroma key */ + struct v4l2_rect osd_rect; /* current OSD position and size */ + struct v4l2_rect main_rect; /* current Main window position and size */ + struct osd_info *osd_info; /* ivtvfb private OSD info */ + void (*ivtvfb_restore)(struct ivtv *itv); /* Used for a warm start */ +}; + +static inline struct ivtv *to_ivtv(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct ivtv, v4l2_dev); +} + +/* ivtv extensions to be loaded */ +extern int (*ivtv_ext_init)(struct ivtv *); + +/* Globals */ +extern int ivtv_first_minor; + +/*==============Prototypes==================*/ + +/* Hardware/IRQ */ +void ivtv_set_irq_mask(struct ivtv *itv, u32 mask); +void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask); + +/* try to set output mode, return current mode. */ +int ivtv_set_output_mode(struct ivtv *itv, int mode); + +/* return current output stream based on current mode */ +struct ivtv_stream *ivtv_get_output_stream(struct ivtv *itv); + +/* Return non-zero if a signal is pending */ +int ivtv_msleep_timeout(unsigned int msecs, int intr); + +/* Wait on queue, returns -EINTR if interrupted */ +int ivtv_waitq(wait_queue_head_t *waitq); + +/* Read Hauppauge eeprom */ +struct tveeprom; /* forward reference */ +void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv); + +/* First-open initialization: load firmware, init cx25840, etc. */ +int ivtv_init_on_first_open(struct ivtv *itv); + +/* Test if the current VBI mode is raw (1) or sliced (0) */ +static inline int ivtv_raw_vbi(const struct ivtv *itv) +{ + return itv->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE; +} + +/* This is a PCI post thing, where if the pci register is not read, then + the write doesn't always take effect right away. By reading back the + register any pending PCI writes will be performed (in order), and so + you can be sure that the writes are guaranteed to be done. + + Rarely needed, only in some timing sensitive cases. + Apparently if this is not done some motherboards seem + to kill the firmware and get into the broken state until computer is + rebooted. */ +#define write_sync(val, reg) \ + do { writel(val, reg); readl(reg); } while (0) + +#define read_reg(reg) readl(itv->reg_mem + (reg)) +#define write_reg(val, reg) writel(val, itv->reg_mem + (reg)) +#define write_reg_sync(val, reg) \ + do { write_reg(val, reg); read_reg(reg); } while (0) + +#define read_enc(addr) readl(itv->enc_mem + (u32)(addr)) +#define write_enc(val, addr) writel(val, itv->enc_mem + (u32)(addr)) +#define write_enc_sync(val, addr) \ + do { write_enc(val, addr); read_enc(addr); } while (0) + +#define read_dec(addr) readl(itv->dec_mem + (u32)(addr)) +#define write_dec(val, addr) writel(val, itv->dec_mem + (u32)(addr)) +#define write_dec_sync(val, addr) \ + do { write_dec(val, addr); read_dec(addr); } while (0) + +/* Call the specified callback for all subdevs matching hw (if 0, then + match them all). Ignore any errors. */ +#define ivtv_call_hw(itv, hw, o, f, args...) \ + do { \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_p(&(itv)->v4l2_dev, __sd, \ + !(hw) || (__sd->grp_id & (hw)), o, f , ##args); \ + } while (0) + +#define ivtv_call_all(itv, o, f, args...) ivtv_call_hw(itv, 0, o, f , ##args) + +/* Call the specified callback for all subdevs matching hw (if 0, then + match them all). If the callback returns an error other than 0 or + -ENOIOCTLCMD, then return with that error code. */ +#define ivtv_call_hw_err(itv, hw, o, f, args...) \ +({ \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_until_err_p(&(itv)->v4l2_dev, __sd, \ + !(hw) || (__sd->grp_id & (hw)), o, f , ##args); \ +}) + +#define ivtv_call_all_err(itv, o, f, args...) ivtv_call_hw_err(itv, 0, o, f , ##args) + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-fileops.c b/drivers/media/pci/ivtv/ivtv-fileops.c new file mode 100644 index 00000000..9caffd8a --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-fileops.c @@ -0,0 +1,1073 @@ +/* + file operation functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-fileops.h" +#include "ivtv-i2c.h" +#include "ivtv-queue.h" +#include "ivtv-udma.h" +#include "ivtv-irq.h" +#include "ivtv-vbi.h" +#include "ivtv-mailbox.h" +#include "ivtv-routing.h" +#include "ivtv-streams.h" +#include "ivtv-yuv.h" +#include "ivtv-ioctl.h" +#include "ivtv-cards.h" +#include "ivtv-firmware.h" +#include +#include + +/* This function tries to claim the stream for a specific file descriptor. + If no one else is using this stream then the stream is claimed and + associated VBI streams are also automatically claimed. + Possible error returns: -EBUSY if someone else has claimed + the stream or 0 on success. */ +int ivtv_claim_stream(struct ivtv_open_id *id, int type) +{ + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[type]; + struct ivtv_stream *s_vbi; + int vbi_type; + + if (test_and_set_bit(IVTV_F_S_CLAIMED, &s->s_flags)) { + /* someone already claimed this stream */ + if (s->fh == &id->fh) { + /* yes, this file descriptor did. So that's OK. */ + return 0; + } + if (s->fh == NULL && (type == IVTV_DEC_STREAM_TYPE_VBI || + type == IVTV_ENC_STREAM_TYPE_VBI)) { + /* VBI is handled already internally, now also assign + the file descriptor to this stream for external + reading of the stream. */ + s->fh = &id->fh; + IVTV_DEBUG_INFO("Start Read VBI\n"); + return 0; + } + /* someone else is using this stream already */ + IVTV_DEBUG_INFO("Stream %d is busy\n", type); + return -EBUSY; + } + s->fh = &id->fh; + if (type == IVTV_DEC_STREAM_TYPE_VBI) { + /* Enable reinsertion interrupt */ + ivtv_clear_irq_mask(itv, IVTV_IRQ_DEC_VBI_RE_INSERT); + } + + /* IVTV_DEC_STREAM_TYPE_MPG needs to claim IVTV_DEC_STREAM_TYPE_VBI, + IVTV_ENC_STREAM_TYPE_MPG needs to claim IVTV_ENC_STREAM_TYPE_VBI + (provided VBI insertion is on and sliced VBI is selected), for all + other streams we're done */ + if (type == IVTV_DEC_STREAM_TYPE_MPG) { + vbi_type = IVTV_DEC_STREAM_TYPE_VBI; + } else if (type == IVTV_ENC_STREAM_TYPE_MPG && + itv->vbi.insert_mpeg && !ivtv_raw_vbi(itv)) { + vbi_type = IVTV_ENC_STREAM_TYPE_VBI; + } else { + return 0; + } + s_vbi = &itv->streams[vbi_type]; + + if (!test_and_set_bit(IVTV_F_S_CLAIMED, &s_vbi->s_flags)) { + /* Enable reinsertion interrupt */ + if (vbi_type == IVTV_DEC_STREAM_TYPE_VBI) + ivtv_clear_irq_mask(itv, IVTV_IRQ_DEC_VBI_RE_INSERT); + } + /* mark that it is used internally */ + set_bit(IVTV_F_S_INTERNAL_USE, &s_vbi->s_flags); + return 0; +} +EXPORT_SYMBOL(ivtv_claim_stream); + +/* This function releases a previously claimed stream. It will take into + account associated VBI streams. */ +void ivtv_release_stream(struct ivtv_stream *s) +{ + struct ivtv *itv = s->itv; + struct ivtv_stream *s_vbi; + + s->fh = NULL; + if ((s->type == IVTV_DEC_STREAM_TYPE_VBI || s->type == IVTV_ENC_STREAM_TYPE_VBI) && + test_bit(IVTV_F_S_INTERNAL_USE, &s->s_flags)) { + /* this stream is still in use internally */ + return; + } + if (!test_and_clear_bit(IVTV_F_S_CLAIMED, &s->s_flags)) { + IVTV_DEBUG_WARN("Release stream %s not in use!\n", s->name); + return; + } + + ivtv_flush_queues(s); + + /* disable reinsertion interrupt */ + if (s->type == IVTV_DEC_STREAM_TYPE_VBI) + ivtv_set_irq_mask(itv, IVTV_IRQ_DEC_VBI_RE_INSERT); + + /* IVTV_DEC_STREAM_TYPE_MPG needs to release IVTV_DEC_STREAM_TYPE_VBI, + IVTV_ENC_STREAM_TYPE_MPG needs to release IVTV_ENC_STREAM_TYPE_VBI, + for all other streams we're done */ + if (s->type == IVTV_DEC_STREAM_TYPE_MPG) + s_vbi = &itv->streams[IVTV_DEC_STREAM_TYPE_VBI]; + else if (s->type == IVTV_ENC_STREAM_TYPE_MPG) + s_vbi = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; + else + return; + + /* clear internal use flag */ + if (!test_and_clear_bit(IVTV_F_S_INTERNAL_USE, &s_vbi->s_flags)) { + /* was already cleared */ + return; + } + if (s_vbi->fh) { + /* VBI stream still claimed by a file descriptor */ + return; + } + /* disable reinsertion interrupt */ + if (s_vbi->type == IVTV_DEC_STREAM_TYPE_VBI) + ivtv_set_irq_mask(itv, IVTV_IRQ_DEC_VBI_RE_INSERT); + clear_bit(IVTV_F_S_CLAIMED, &s_vbi->s_flags); + ivtv_flush_queues(s_vbi); +} +EXPORT_SYMBOL(ivtv_release_stream); + +static void ivtv_dualwatch(struct ivtv *itv) +{ + struct v4l2_tuner vt; + u32 new_stereo_mode; + const u32 dual = 0x02; + + new_stereo_mode = v4l2_ctrl_g_ctrl(itv->cxhdl.audio_mode); + memset(&vt, 0, sizeof(vt)); + ivtv_call_all(itv, tuner, g_tuner, &vt); + if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 && (vt.rxsubchans & V4L2_TUNER_SUB_LANG2)) + new_stereo_mode = dual; + + if (new_stereo_mode == itv->dualwatch_stereo_mode) + return; + + IVTV_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x.\n", + itv->dualwatch_stereo_mode, new_stereo_mode); + if (v4l2_ctrl_s_ctrl(itv->cxhdl.audio_mode, new_stereo_mode)) + IVTV_DEBUG_INFO("dualwatch: changing stereo flag failed\n"); +} + +static void ivtv_update_pgm_info(struct ivtv *itv) +{ + u32 wr_idx = (read_enc(itv->pgm_info_offset) - itv->pgm_info_offset - 4) / 24; + int cnt; + int i = 0; + + if (wr_idx >= itv->pgm_info_num) { + IVTV_DEBUG_WARN("Invalid PGM index %d (>= %d)\n", wr_idx, itv->pgm_info_num); + return; + } + cnt = (wr_idx + itv->pgm_info_num - itv->pgm_info_write_idx) % itv->pgm_info_num; + while (i < cnt) { + int idx = (itv->pgm_info_write_idx + i) % itv->pgm_info_num; + struct v4l2_enc_idx_entry *e = itv->pgm_info + idx; + u32 addr = itv->pgm_info_offset + 4 + idx * 24; + const int mapping[8] = { -1, V4L2_ENC_IDX_FRAME_I, V4L2_ENC_IDX_FRAME_P, -1, + V4L2_ENC_IDX_FRAME_B, -1, -1, -1 }; + // 1=I, 2=P, 4=B + + e->offset = read_enc(addr + 4) + ((u64)read_enc(addr + 8) << 32); + if (e->offset > itv->mpg_data_received) { + break; + } + e->offset += itv->vbi_data_inserted; + e->length = read_enc(addr); + e->pts = read_enc(addr + 16) + ((u64)(read_enc(addr + 20) & 1) << 32); + e->flags = mapping[read_enc(addr + 12) & 7]; + i++; + } + itv->pgm_info_write_idx = (itv->pgm_info_write_idx + i) % itv->pgm_info_num; +} + +static struct ivtv_buffer *ivtv_get_buffer(struct ivtv_stream *s, int non_block, int *err) +{ + struct ivtv *itv = s->itv; + struct ivtv_stream *s_vbi = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; + struct ivtv_buffer *buf; + DEFINE_WAIT(wait); + + *err = 0; + while (1) { + if (s->type == IVTV_ENC_STREAM_TYPE_MPG) { + /* Process pending program info updates and pending VBI data */ + ivtv_update_pgm_info(itv); + + if (time_after(jiffies, + itv->dualwatch_jiffies + + msecs_to_jiffies(1000))) { + itv->dualwatch_jiffies = jiffies; + ivtv_dualwatch(itv); + } + + if (test_bit(IVTV_F_S_INTERNAL_USE, &s_vbi->s_flags) && + !test_bit(IVTV_F_S_APPL_IO, &s_vbi->s_flags)) { + while ((buf = ivtv_dequeue(s_vbi, &s_vbi->q_full))) { + /* byteswap and process VBI data */ + ivtv_process_vbi_data(itv, buf, s_vbi->dma_pts, s_vbi->type); + ivtv_enqueue(s_vbi, buf, &s_vbi->q_free); + } + } + buf = &itv->vbi.sliced_mpeg_buf; + if (buf->readpos != buf->bytesused) { + return buf; + } + } + + /* do we have leftover data? */ + buf = ivtv_dequeue(s, &s->q_io); + if (buf) + return buf; + + /* do we have new data? */ + buf = ivtv_dequeue(s, &s->q_full); + if (buf) { + if ((buf->b_flags & IVTV_F_B_NEED_BUF_SWAP) == 0) + return buf; + buf->b_flags &= ~IVTV_F_B_NEED_BUF_SWAP; + if (s->type == IVTV_ENC_STREAM_TYPE_MPG) + /* byteswap MPG data */ + ivtv_buf_swap(buf); + else if (s->type != IVTV_DEC_STREAM_TYPE_VBI) { + /* byteswap and process VBI data */ + ivtv_process_vbi_data(itv, buf, s->dma_pts, s->type); + } + return buf; + } + + /* return if end of stream */ + if (s->type != IVTV_DEC_STREAM_TYPE_VBI && !test_bit(IVTV_F_S_STREAMING, &s->s_flags)) { + IVTV_DEBUG_INFO("EOS %s\n", s->name); + return NULL; + } + + /* return if file was opened with O_NONBLOCK */ + if (non_block) { + *err = -EAGAIN; + return NULL; + } + + /* wait for more data to arrive */ + mutex_unlock(&itv->serialize_lock); + prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE); + /* New buffers might have become available before we were added to the waitqueue */ + if (!s->q_full.buffers) + schedule(); + finish_wait(&s->waitq, &wait); + mutex_lock(&itv->serialize_lock); + if (signal_pending(current)) { + /* return if a signal was received */ + IVTV_DEBUG_INFO("User stopped %s\n", s->name); + *err = -EINTR; + return NULL; + } + } +} + +static void ivtv_setup_sliced_vbi_buf(struct ivtv *itv) +{ + int idx = itv->vbi.inserted_frame % IVTV_VBI_FRAMES; + + itv->vbi.sliced_mpeg_buf.buf = itv->vbi.sliced_mpeg_data[idx]; + itv->vbi.sliced_mpeg_buf.bytesused = itv->vbi.sliced_mpeg_size[idx]; + itv->vbi.sliced_mpeg_buf.readpos = 0; +} + +static size_t ivtv_copy_buf_to_user(struct ivtv_stream *s, struct ivtv_buffer *buf, + char __user *ubuf, size_t ucount) +{ + struct ivtv *itv = s->itv; + size_t len = buf->bytesused - buf->readpos; + + if (len > ucount) len = ucount; + if (itv->vbi.insert_mpeg && s->type == IVTV_ENC_STREAM_TYPE_MPG && + !ivtv_raw_vbi(itv) && buf != &itv->vbi.sliced_mpeg_buf) { + const char *start = buf->buf + buf->readpos; + const char *p = start + 1; + const u8 *q; + u8 ch = itv->search_pack_header ? 0xba : 0xe0; + int stuffing, i; + + while (start + len > p && (q = memchr(p, 0, start + len - p))) { + p = q + 1; + if ((char *)q + 15 >= buf->buf + buf->bytesused || + q[1] != 0 || q[2] != 1 || q[3] != ch) { + continue; + } + if (!itv->search_pack_header) { + if ((q[6] & 0xc0) != 0x80) + continue; + if (((q[7] & 0xc0) == 0x80 && (q[9] & 0xf0) == 0x20) || + ((q[7] & 0xc0) == 0xc0 && (q[9] & 0xf0) == 0x30)) { + ch = 0xba; + itv->search_pack_header = 1; + p = q + 9; + } + continue; + } + stuffing = q[13] & 7; + /* all stuffing bytes must be 0xff */ + for (i = 0; i < stuffing; i++) + if (q[14 + i] != 0xff) + break; + if (i == stuffing && (q[4] & 0xc4) == 0x44 && (q[12] & 3) == 3 && + q[14 + stuffing] == 0 && q[15 + stuffing] == 0 && + q[16 + stuffing] == 1) { + itv->search_pack_header = 0; + len = (char *)q - start; + ivtv_setup_sliced_vbi_buf(itv); + break; + } + } + } + if (copy_to_user(ubuf, (u8 *)buf->buf + buf->readpos, len)) { + IVTV_DEBUG_WARN("copy %zd bytes to user failed for %s\n", len, s->name); + return -EFAULT; + } + /*IVTV_INFO("copied %lld %d %d %d %d %d vbi %d\n", itv->mpg_data_received, len, ucount, + buf->readpos, buf->bytesused, buf->bytesused - buf->readpos - len, + buf == &itv->vbi.sliced_mpeg_buf); */ + buf->readpos += len; + if (s->type == IVTV_ENC_STREAM_TYPE_MPG && buf != &itv->vbi.sliced_mpeg_buf) + itv->mpg_data_received += len; + return len; +} + +static ssize_t ivtv_read(struct ivtv_stream *s, char __user *ubuf, size_t tot_count, int non_block) +{ + struct ivtv *itv = s->itv; + size_t tot_written = 0; + int single_frame = 0; + + if (atomic_read(&itv->capturing) == 0 && s->fh == NULL) { + /* shouldn't happen */ + IVTV_DEBUG_WARN("Stream %s not initialized before read\n", s->name); + return -EIO; + } + + /* Each VBI buffer is one frame, the v4l2 API says that for VBI the frames should + arrive one-by-one, so make sure we never output more than one VBI frame at a time */ + if (s->type == IVTV_DEC_STREAM_TYPE_VBI || + (s->type == IVTV_ENC_STREAM_TYPE_VBI && !ivtv_raw_vbi(itv))) + single_frame = 1; + + for (;;) { + struct ivtv_buffer *buf; + int rc; + + buf = ivtv_get_buffer(s, non_block, &rc); + /* if there is no data available... */ + if (buf == NULL) { + /* if we got data, then return that regardless */ + if (tot_written) + break; + /* EOS condition */ + if (rc == 0) { + clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags); + clear_bit(IVTV_F_S_APPL_IO, &s->s_flags); + ivtv_release_stream(s); + } + /* set errno */ + return rc; + } + rc = ivtv_copy_buf_to_user(s, buf, ubuf + tot_written, tot_count - tot_written); + if (buf != &itv->vbi.sliced_mpeg_buf) { + ivtv_enqueue(s, buf, (buf->readpos == buf->bytesused) ? &s->q_free : &s->q_io); + } + else if (buf->readpos == buf->bytesused) { + int idx = itv->vbi.inserted_frame % IVTV_VBI_FRAMES; + itv->vbi.sliced_mpeg_size[idx] = 0; + itv->vbi.inserted_frame++; + itv->vbi_data_inserted += buf->bytesused; + } + if (rc < 0) + return rc; + tot_written += rc; + + if (tot_written == tot_count || single_frame) + break; + } + return tot_written; +} + +static ssize_t ivtv_read_pos(struct ivtv_stream *s, char __user *ubuf, size_t count, + loff_t *pos, int non_block) +{ + ssize_t rc = count ? ivtv_read(s, ubuf, count, non_block) : 0; + struct ivtv *itv = s->itv; + + IVTV_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc); + if (rc > 0) + pos += rc; + return rc; +} + +int ivtv_start_capture(struct ivtv_open_id *id) +{ + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + struct ivtv_stream *s_vbi; + + if (s->type == IVTV_ENC_STREAM_TYPE_RAD || + s->type == IVTV_DEC_STREAM_TYPE_MPG || + s->type == IVTV_DEC_STREAM_TYPE_YUV || + s->type == IVTV_DEC_STREAM_TYPE_VOUT) { + /* you cannot read from these stream types. */ + return -EINVAL; + } + + /* Try to claim this stream. */ + if (ivtv_claim_stream(id, s->type)) + return -EBUSY; + + /* This stream does not need to start capturing */ + if (s->type == IVTV_DEC_STREAM_TYPE_VBI) { + set_bit(IVTV_F_S_APPL_IO, &s->s_flags); + return 0; + } + + /* If capture is already in progress, then we also have to + do nothing extra. */ + if (test_bit(IVTV_F_S_STREAMOFF, &s->s_flags) || test_and_set_bit(IVTV_F_S_STREAMING, &s->s_flags)) { + set_bit(IVTV_F_S_APPL_IO, &s->s_flags); + return 0; + } + + /* Start VBI capture if required */ + s_vbi = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; + if (s->type == IVTV_ENC_STREAM_TYPE_MPG && + test_bit(IVTV_F_S_INTERNAL_USE, &s_vbi->s_flags) && + !test_and_set_bit(IVTV_F_S_STREAMING, &s_vbi->s_flags)) { + /* Note: the IVTV_ENC_STREAM_TYPE_VBI is claimed + automatically when the MPG stream is claimed. + We only need to start the VBI capturing. */ + if (ivtv_start_v4l2_encode_stream(s_vbi)) { + IVTV_DEBUG_WARN("VBI capture start failed\n"); + + /* Failure, clean up and return an error */ + clear_bit(IVTV_F_S_STREAMING, &s_vbi->s_flags); + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + /* also releases the associated VBI stream */ + ivtv_release_stream(s); + return -EIO; + } + IVTV_DEBUG_INFO("VBI insertion started\n"); + } + + /* Tell the card to start capturing */ + if (!ivtv_start_v4l2_encode_stream(s)) { + /* We're done */ + set_bit(IVTV_F_S_APPL_IO, &s->s_flags); + /* Resume a possibly paused encoder */ + if (test_and_clear_bit(IVTV_F_I_ENC_PAUSED, &itv->i_flags)) + ivtv_vapi(itv, CX2341X_ENC_PAUSE_ENCODER, 1, 1); + return 0; + } + + /* failure, clean up */ + IVTV_DEBUG_WARN("Failed to start capturing for stream %s\n", s->name); + + /* Note: the IVTV_ENC_STREAM_TYPE_VBI is released + automatically when the MPG stream is released. + We only need to stop the VBI capturing. */ + if (s->type == IVTV_ENC_STREAM_TYPE_MPG && + test_bit(IVTV_F_S_STREAMING, &s_vbi->s_flags)) { + ivtv_stop_v4l2_encode_stream(s_vbi, 0); + clear_bit(IVTV_F_S_STREAMING, &s_vbi->s_flags); + } + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + ivtv_release_stream(s); + return -EIO; +} + +ssize_t ivtv_v4l2_read(struct file * filp, char __user *buf, size_t count, loff_t * pos) +{ + struct ivtv_open_id *id = fh2id(filp->private_data); + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + ssize_t rc; + + IVTV_DEBUG_HI_FILE("read %zd bytes from %s\n", count, s->name); + + if (mutex_lock_interruptible(&itv->serialize_lock)) + return -ERESTARTSYS; + rc = ivtv_start_capture(id); + if (!rc) + rc = ivtv_read_pos(s, buf, count, pos, filp->f_flags & O_NONBLOCK); + mutex_unlock(&itv->serialize_lock); + return rc; +} + +int ivtv_start_decoding(struct ivtv_open_id *id, int speed) +{ + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + int rc; + + if (atomic_read(&itv->decoding) == 0) { + if (ivtv_claim_stream(id, s->type)) { + /* someone else is using this stream already */ + IVTV_DEBUG_WARN("start decode, stream already claimed\n"); + return -EBUSY; + } + rc = ivtv_start_v4l2_decode_stream(s, 0); + if (rc < 0) { + if (rc == -EAGAIN) + rc = ivtv_start_v4l2_decode_stream(s, 0); + if (rc < 0) + return rc; + } + } + if (s->type == IVTV_DEC_STREAM_TYPE_MPG) + return ivtv_set_speed(itv, speed); + return 0; +} + +static ssize_t ivtv_write(struct file *filp, const char __user *user_buf, size_t count, loff_t *pos) +{ + struct ivtv_open_id *id = fh2id(filp->private_data); + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + struct yuv_playback_info *yi = &itv->yuv_info; + struct ivtv_buffer *buf; + struct ivtv_queue q; + int bytes_written = 0; + int mode; + int rc; + DEFINE_WAIT(wait); + + IVTV_DEBUG_HI_FILE("write %zd bytes to %s\n", count, s->name); + + if (s->type != IVTV_DEC_STREAM_TYPE_MPG && + s->type != IVTV_DEC_STREAM_TYPE_YUV && + s->type != IVTV_DEC_STREAM_TYPE_VOUT) + /* not decoder streams */ + return -EINVAL; + + /* Try to claim this stream */ + if (ivtv_claim_stream(id, s->type)) + return -EBUSY; + + /* This stream does not need to start any decoding */ + if (s->type == IVTV_DEC_STREAM_TYPE_VOUT) { + int elems = count / sizeof(struct v4l2_sliced_vbi_data); + + set_bit(IVTV_F_S_APPL_IO, &s->s_flags); + return ivtv_write_vbi_from_user(itv, + (const struct v4l2_sliced_vbi_data __user *)user_buf, elems); + } + + mode = s->type == IVTV_DEC_STREAM_TYPE_MPG ? OUT_MPG : OUT_YUV; + + if (ivtv_set_output_mode(itv, mode) != mode) { + ivtv_release_stream(s); + return -EBUSY; + } + ivtv_queue_init(&q); + set_bit(IVTV_F_S_APPL_IO, &s->s_flags); + + /* Start decoder (returns 0 if already started) */ + rc = ivtv_start_decoding(id, itv->speed); + if (rc) { + IVTV_DEBUG_WARN("Failed start decode stream %s\n", s->name); + + /* failure, clean up */ + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + clear_bit(IVTV_F_S_APPL_IO, &s->s_flags); + return rc; + } + +retry: + /* If possible, just DMA the entire frame - Check the data transfer size + since we may get here before the stream has been fully set-up */ + if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) { + while (count >= itv->dma_data_req_size) { + rc = ivtv_yuv_udma_stream_frame(itv, (void __user *)user_buf); + + if (rc < 0) + return rc; + + bytes_written += itv->dma_data_req_size; + user_buf += itv->dma_data_req_size; + count -= itv->dma_data_req_size; + } + if (count == 0) { + IVTV_DEBUG_HI_FILE("Wrote %d bytes to %s (%d)\n", bytes_written, s->name, s->q_full.bytesused); + return bytes_written; + } + } + + for (;;) { + /* Gather buffers */ + while (q.length - q.bytesused < count && (buf = ivtv_dequeue(s, &s->q_io))) + ivtv_enqueue(s, buf, &q); + while (q.length - q.bytesused < count && (buf = ivtv_dequeue(s, &s->q_free))) { + ivtv_enqueue(s, buf, &q); + } + if (q.buffers) + break; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + mutex_unlock(&itv->serialize_lock); + prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE); + /* New buffers might have become free before we were added to the waitqueue */ + if (!s->q_free.buffers) + schedule(); + finish_wait(&s->waitq, &wait); + mutex_lock(&itv->serialize_lock); + if (signal_pending(current)) { + IVTV_DEBUG_INFO("User stopped %s\n", s->name); + return -EINTR; + } + } + + /* copy user data into buffers */ + while ((buf = ivtv_dequeue(s, &q))) { + /* yuv is a pain. Don't copy more data than needed for a single + frame, otherwise we lose sync with the incoming stream */ + if (s->type == IVTV_DEC_STREAM_TYPE_YUV && + yi->stream_size + count > itv->dma_data_req_size) + rc = ivtv_buf_copy_from_user(s, buf, user_buf, + itv->dma_data_req_size - yi->stream_size); + else + rc = ivtv_buf_copy_from_user(s, buf, user_buf, count); + + /* Make sure we really got all the user data */ + if (rc < 0) { + ivtv_queue_move(s, &q, NULL, &s->q_free, 0); + return rc; + } + user_buf += rc; + count -= rc; + bytes_written += rc; + + if (s->type == IVTV_DEC_STREAM_TYPE_YUV) { + yi->stream_size += rc; + /* If we have a complete yuv frame, break loop now */ + if (yi->stream_size == itv->dma_data_req_size) { + ivtv_enqueue(s, buf, &s->q_full); + yi->stream_size = 0; + break; + } + } + + if (buf->bytesused != s->buf_size) { + /* incomplete, leave in q_io for next time */ + ivtv_enqueue(s, buf, &s->q_io); + break; + } + /* Byteswap MPEG buffer */ + if (s->type == IVTV_DEC_STREAM_TYPE_MPG) + ivtv_buf_swap(buf); + ivtv_enqueue(s, buf, &s->q_full); + } + + if (test_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags)) { + if (s->q_full.length >= itv->dma_data_req_size) { + int got_sig; + + if (mode == OUT_YUV) + ivtv_yuv_setup_stream_frame(itv); + + mutex_unlock(&itv->serialize_lock); + prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); + while (!(got_sig = signal_pending(current)) && + test_bit(IVTV_F_S_DMA_PENDING, &s->s_flags)) { + schedule(); + } + finish_wait(&itv->dma_waitq, &wait); + mutex_lock(&itv->serialize_lock); + if (got_sig) { + IVTV_DEBUG_INFO("User interrupted %s\n", s->name); + return -EINTR; + } + + clear_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags); + ivtv_queue_move(s, &s->q_full, NULL, &s->q_predma, itv->dma_data_req_size); + ivtv_dma_stream_dec_prepare(s, itv->dma_data_req_offset + IVTV_DECODER_OFFSET, 1); + } + } + /* more user data is available, wait until buffers become free + to transfer the rest. */ + if (count && !(filp->f_flags & O_NONBLOCK)) + goto retry; + IVTV_DEBUG_HI_FILE("Wrote %d bytes to %s (%d)\n", bytes_written, s->name, s->q_full.bytesused); + return bytes_written; +} + +ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t count, loff_t *pos) +{ + struct ivtv_open_id *id = fh2id(filp->private_data); + struct ivtv *itv = id->itv; + ssize_t res; + + if (mutex_lock_interruptible(&itv->serialize_lock)) + return -ERESTARTSYS; + res = ivtv_write(filp, user_buf, count, pos); + mutex_unlock(&itv->serialize_lock); + return res; +} + +unsigned int ivtv_v4l2_dec_poll(struct file *filp, poll_table *wait) +{ + struct ivtv_open_id *id = fh2id(filp->private_data); + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + int res = 0; + + /* add stream's waitq to the poll list */ + IVTV_DEBUG_HI_FILE("Decoder poll\n"); + + /* If there are subscribed events, then only use the new event + API instead of the old video.h based API. */ + if (!list_empty(&id->fh.subscribed)) { + poll_wait(filp, &id->fh.wait, wait); + /* Turn off the old-style vsync events */ + clear_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags); + if (v4l2_event_pending(&id->fh)) + res = POLLPRI; + } else { + /* This is the old-style API which is here only for backwards + compatibility. */ + poll_wait(filp, &s->waitq, wait); + set_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags); + if (test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags) || + test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags)) + res = POLLPRI; + } + + /* Allow write if buffers are available for writing */ + if (s->q_free.buffers) + res |= POLLOUT | POLLWRNORM; + return res; +} + +unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table *wait) +{ + unsigned long req_events = poll_requested_events(wait); + struct ivtv_open_id *id = fh2id(filp->private_data); + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + int eof = test_bit(IVTV_F_S_STREAMOFF, &s->s_flags); + unsigned res = 0; + + /* Start a capture if there is none */ + if (!eof && !test_bit(IVTV_F_S_STREAMING, &s->s_flags) && + s->type != IVTV_ENC_STREAM_TYPE_RAD && + (req_events & (POLLIN | POLLRDNORM))) { + int rc; + + mutex_lock(&itv->serialize_lock); + rc = ivtv_start_capture(id); + mutex_unlock(&itv->serialize_lock); + if (rc) { + IVTV_DEBUG_INFO("Could not start capture for %s (%d)\n", + s->name, rc); + return POLLERR; + } + IVTV_DEBUG_FILE("Encoder poll started capture\n"); + } + + /* add stream's waitq to the poll list */ + IVTV_DEBUG_HI_FILE("Encoder poll\n"); + poll_wait(filp, &s->waitq, wait); + if (v4l2_event_pending(&id->fh)) + res |= POLLPRI; + else + poll_wait(filp, &id->fh.wait, wait); + + if (s->q_full.length || s->q_io.length) + return res | POLLIN | POLLRDNORM; + if (eof) + return res | POLLHUP; + return res; +} + +void ivtv_stop_capture(struct ivtv_open_id *id, int gop_end) +{ + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + + IVTV_DEBUG_FILE("close() of %s\n", s->name); + + /* 'Unclaim' this stream */ + + /* Stop capturing */ + if (test_bit(IVTV_F_S_STREAMING, &s->s_flags)) { + struct ivtv_stream *s_vbi = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; + + IVTV_DEBUG_INFO("close stopping capture\n"); + /* Special case: a running VBI capture for VBI insertion + in the mpeg stream. Need to stop that too. */ + if (id->type == IVTV_ENC_STREAM_TYPE_MPG && + test_bit(IVTV_F_S_STREAMING, &s_vbi->s_flags) && + !test_bit(IVTV_F_S_APPL_IO, &s_vbi->s_flags)) { + IVTV_DEBUG_INFO("close stopping embedded VBI capture\n"); + ivtv_stop_v4l2_encode_stream(s_vbi, 0); + } + if ((id->type == IVTV_DEC_STREAM_TYPE_VBI || + id->type == IVTV_ENC_STREAM_TYPE_VBI) && + test_bit(IVTV_F_S_INTERNAL_USE, &s->s_flags)) { + /* Also used internally, don't stop capturing */ + s->fh = NULL; + } + else { + ivtv_stop_v4l2_encode_stream(s, gop_end); + } + } + if (!gop_end) { + clear_bit(IVTV_F_S_APPL_IO, &s->s_flags); + clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags); + ivtv_release_stream(s); + } +} + +static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts) +{ + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + + IVTV_DEBUG_FILE("close() of %s\n", s->name); + + if (id->type == IVTV_DEC_STREAM_TYPE_YUV && + test_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags)) { + /* Restore registers we've changed & clean up any mess */ + ivtv_yuv_close(itv); + } + + /* Stop decoding */ + if (test_bit(IVTV_F_S_STREAMING, &s->s_flags)) { + IVTV_DEBUG_INFO("close stopping decode\n"); + + ivtv_stop_v4l2_decode_stream(s, flags, pts); + itv->output_mode = OUT_NONE; + } + clear_bit(IVTV_F_S_APPL_IO, &s->s_flags); + clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags); + + if (itv->output_mode == OUT_UDMA_YUV && id->yuv_frames) + itv->output_mode = OUT_NONE; + + itv->speed = 0; + clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags); + ivtv_release_stream(s); +} + +int ivtv_v4l2_close(struct file *filp) +{ + struct v4l2_fh *fh = filp->private_data; + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + + IVTV_DEBUG_FILE("close %s\n", s->name); + + mutex_lock(&itv->serialize_lock); + + /* Stop radio */ + if (id->type == IVTV_ENC_STREAM_TYPE_RAD && + v4l2_fh_is_singular_file(filp)) { + /* Closing radio device, return to TV mode */ + ivtv_mute(itv); + /* Mark that the radio is no longer in use */ + clear_bit(IVTV_F_I_RADIO_USER, &itv->i_flags); + /* Switch tuner to TV */ + ivtv_call_all(itv, core, s_std, itv->std); + /* Select correct audio input (i.e. TV tuner or Line in) */ + ivtv_audio_set_io(itv); + if (itv->hw_flags & IVTV_HW_SAA711X) { + ivtv_call_hw(itv, IVTV_HW_SAA711X, video, s_crystal_freq, + SAA7115_FREQ_32_11_MHZ, 0); + } + if (atomic_read(&itv->capturing) > 0) { + /* Undo video mute */ + ivtv_vapi(itv, CX2341X_ENC_MUTE_VIDEO, 1, + v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute) | + (v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute_yuv) << 8)); + } + /* Done! Unmute and continue. */ + ivtv_unmute(itv); + } + + v4l2_fh_del(fh); + v4l2_fh_exit(fh); + + /* Easy case first: this stream was never claimed by us */ + if (s->fh != &id->fh) + goto close_done; + + /* 'Unclaim' this stream */ + + if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) { + struct ivtv_stream *s_vout = &itv->streams[IVTV_DEC_STREAM_TYPE_VOUT]; + + ivtv_stop_decoding(id, V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY, 0); + + /* If all output streams are closed, and if the user doesn't have + IVTV_DEC_STREAM_TYPE_VOUT open, then disable CC on TV-out. */ + if (itv->output_mode == OUT_NONE && !test_bit(IVTV_F_S_APPL_IO, &s_vout->s_flags)) { + /* disable CC on TV-out */ + ivtv_disable_cc(itv); + } + } else { + ivtv_stop_capture(id, 0); + } +close_done: + kfree(id); + mutex_unlock(&itv->serialize_lock); + return 0; +} + +static int ivtv_open(struct file *filp) +{ + struct video_device *vdev = video_devdata(filp); + struct ivtv_stream *s = video_get_drvdata(vdev); + struct ivtv *itv = s->itv; + struct ivtv_open_id *item; + int res = 0; + + IVTV_DEBUG_FILE("open %s\n", s->name); + + if (ivtv_init_on_first_open(itv)) { + IVTV_ERR("Failed to initialize on device %s\n", + video_device_node_name(vdev)); + return -ENXIO; + } + +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* Unless ivtv_fw_debug is set, error out if firmware dead. */ + if (ivtv_fw_debug) { + IVTV_WARN("Opening %s with dead firmware lockout disabled\n", + video_device_node_name(vdev)); + IVTV_WARN("Selected firmware errors will be ignored\n"); + } else { +#else + if (1) { +#endif + res = ivtv_firmware_check(itv, "ivtv_serialized_open"); + if (res == -EAGAIN) + res = ivtv_firmware_check(itv, "ivtv_serialized_open"); + if (res < 0) + return -EIO; + } + + if (s->type == IVTV_DEC_STREAM_TYPE_MPG && + test_bit(IVTV_F_S_CLAIMED, &itv->streams[IVTV_DEC_STREAM_TYPE_YUV].s_flags)) + return -EBUSY; + + if (s->type == IVTV_DEC_STREAM_TYPE_YUV && + test_bit(IVTV_F_S_CLAIMED, &itv->streams[IVTV_DEC_STREAM_TYPE_MPG].s_flags)) + return -EBUSY; + + if (s->type == IVTV_DEC_STREAM_TYPE_YUV) { + if (read_reg(0x82c) == 0) { + IVTV_ERR("Tried to open YUV output device but need to send data to mpeg decoder before it can be used\n"); + /* return -ENODEV; */ + } + ivtv_udma_alloc(itv); + } + + /* Allocate memory */ + item = kzalloc(sizeof(struct ivtv_open_id), GFP_KERNEL); + if (NULL == item) { + IVTV_DEBUG_WARN("nomem on v4l2 open\n"); + return -ENOMEM; + } + v4l2_fh_init(&item->fh, s->vdev); + item->itv = itv; + item->type = s->type; + + filp->private_data = &item->fh; + v4l2_fh_add(&item->fh); + + if (item->type == IVTV_ENC_STREAM_TYPE_RAD && + v4l2_fh_is_singular_file(filp)) { + if (!test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) { + if (atomic_read(&itv->capturing) > 0) { + /* switching to radio while capture is + in progress is not polite */ + v4l2_fh_del(&item->fh); + v4l2_fh_exit(&item->fh); + kfree(item); + return -EBUSY; + } + } + /* Mark that the radio is being used. */ + set_bit(IVTV_F_I_RADIO_USER, &itv->i_flags); + /* We have the radio */ + ivtv_mute(itv); + /* Switch tuner to radio */ + ivtv_call_all(itv, tuner, s_radio); + /* Select the correct audio input (i.e. radio tuner) */ + ivtv_audio_set_io(itv); + if (itv->hw_flags & IVTV_HW_SAA711X) { + ivtv_call_hw(itv, IVTV_HW_SAA711X, video, s_crystal_freq, + SAA7115_FREQ_32_11_MHZ, SAA7115_FREQ_FL_APLL); + } + /* Done! Unmute and continue. */ + ivtv_unmute(itv); + } + + /* YUV or MPG Decoding Mode? */ + if (s->type == IVTV_DEC_STREAM_TYPE_MPG) { + clear_bit(IVTV_F_I_DEC_YUV, &itv->i_flags); + } else if (s->type == IVTV_DEC_STREAM_TYPE_YUV) { + set_bit(IVTV_F_I_DEC_YUV, &itv->i_flags); + /* For yuv, we need to know the dma size before we start */ + itv->dma_data_req_size = + 1080 * ((itv->yuv_info.v4l2_src_h + 31) & ~31); + itv->yuv_info.stream_size = 0; + } + return 0; +} + +int ivtv_v4l2_open(struct file *filp) +{ + struct video_device *vdev = video_devdata(filp); + int res; + + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + res = ivtv_open(filp); + mutex_unlock(vdev->lock); + return res; +} + +void ivtv_mute(struct ivtv *itv) +{ + if (atomic_read(&itv->capturing)) + ivtv_vapi(itv, CX2341X_ENC_MUTE_AUDIO, 1, 1); + IVTV_DEBUG_INFO("Mute\n"); +} + +void ivtv_unmute(struct ivtv *itv) +{ + if (atomic_read(&itv->capturing)) { + ivtv_msleep_timeout(100, 0); + ivtv_vapi(itv, CX2341X_ENC_MISC, 1, 12); + ivtv_vapi(itv, CX2341X_ENC_MUTE_AUDIO, 1, 0); + } + IVTV_DEBUG_INFO("Unmute\n"); +} diff --git a/drivers/media/pci/ivtv/ivtv-fileops.h b/drivers/media/pci/ivtv/ivtv-fileops.h new file mode 100644 index 00000000..5e088007 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-fileops.h @@ -0,0 +1,44 @@ +/* + file operation functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_FILEOPS_H +#define IVTV_FILEOPS_H + +/* Testing/Debugging */ +int ivtv_v4l2_open(struct file *filp); +ssize_t ivtv_v4l2_read(struct file *filp, char __user *buf, size_t count, + loff_t * pos); +ssize_t ivtv_v4l2_write(struct file *filp, const char __user *buf, size_t count, + loff_t * pos); +int ivtv_v4l2_close(struct file *filp); +unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait); +unsigned int ivtv_v4l2_dec_poll(struct file *filp, poll_table * wait); +int ivtv_start_capture(struct ivtv_open_id *id); +void ivtv_stop_capture(struct ivtv_open_id *id, int gop_end); +int ivtv_start_decoding(struct ivtv_open_id *id, int speed); +void ivtv_mute(struct ivtv *itv); +void ivtv_unmute(struct ivtv *itv); + +/* Utilities */ +/* Shared with ivtv-alsa module */ +int ivtv_claim_stream(struct ivtv_open_id *id, int type); +void ivtv_release_stream(struct ivtv_stream *s); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-firmware.c b/drivers/media/pci/ivtv/ivtv-firmware.c new file mode 100644 index 00000000..ed73edd2 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-firmware.c @@ -0,0 +1,402 @@ +/* + ivtv firmware functions. + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-mailbox.h" +#include "ivtv-firmware.h" +#include "ivtv-yuv.h" +#include "ivtv-ioctl.h" +#include "ivtv-cards.h" +#include +#include + +#define IVTV_MASK_SPU_ENABLE 0xFFFFFFFE +#define IVTV_MASK_VPU_ENABLE15 0xFFFFFFF6 +#define IVTV_MASK_VPU_ENABLE16 0xFFFFFFFB +#define IVTV_CMD_VDM_STOP 0x00000000 +#define IVTV_CMD_AO_STOP 0x00000005 +#define IVTV_CMD_APU_PING 0x00000000 +#define IVTV_CMD_VPU_STOP15 0xFFFFFFFE +#define IVTV_CMD_VPU_STOP16 0xFFFFFFEE +#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF +#define IVTV_CMD_SPU_STOP 0x00000001 +#define IVTV_CMD_SDRAM_PRECHARGE_INIT 0x0000001A +#define IVTV_CMD_SDRAM_REFRESH_INIT 0x80000640 +#define IVTV_SDRAM_SLEEPTIME 600 + +#define IVTV_DECODE_INIT_MPEG_FILENAME "v4l-cx2341x-init.mpg" +#define IVTV_DECODE_INIT_MPEG_SIZE (152*1024) + +/* Encoder/decoder firmware sizes */ +#define IVTV_FW_ENC_SIZE (376836) +#define IVTV_FW_DEC_SIZE (256*1024) + +static int load_fw_direct(const char *fn, volatile u8 __iomem *mem, struct ivtv *itv, long size) +{ + const struct firmware *fw = NULL; + int retries = 3; + +retry: + if (retries && request_firmware(&fw, fn, &itv->pdev->dev) == 0) { + int i; + volatile u32 __iomem *dst = (volatile u32 __iomem *)mem; + const u32 *src = (const u32 *)fw->data; + + if (fw->size != size) { + /* Due to race conditions in firmware loading (esp. with udev <0.95) + the wrong file was sometimes loaded. So we check filesizes to + see if at least the right-sized file was loaded. If not, then we + retry. */ + IVTV_INFO("Retry: file loaded was not %s (expected size %ld, got %zd)\n", fn, size, fw->size); + release_firmware(fw); + retries--; + goto retry; + } + for (i = 0; i < fw->size; i += 4) { + /* no need for endianness conversion on the ppc */ + __raw_writel(*src, dst); + dst++; + src++; + } + IVTV_INFO("Loaded %s firmware (%zd bytes)\n", fn, fw->size); + release_firmware(fw); + return size; + } + IVTV_ERR("Unable to open firmware %s (must be %ld bytes)\n", fn, size); + IVTV_ERR("Did you put the firmware in the hotplug firmware directory?\n"); + return -ENOMEM; +} + +void ivtv_halt_firmware(struct ivtv *itv) +{ + IVTV_DEBUG_INFO("Preparing for firmware halt.\n"); + if (itv->has_cx23415 && itv->dec_mbox.mbox) + ivtv_vapi(itv, CX2341X_DEC_HALT_FW, 0); + if (itv->enc_mbox.mbox) + ivtv_vapi(itv, CX2341X_ENC_HALT_FW, 0); + + ivtv_msleep_timeout(10, 0); + itv->enc_mbox.mbox = itv->dec_mbox.mbox = NULL; + + IVTV_DEBUG_INFO("Stopping VDM\n"); + write_reg(IVTV_CMD_VDM_STOP, IVTV_REG_VDM); + + IVTV_DEBUG_INFO("Stopping AO\n"); + write_reg(IVTV_CMD_AO_STOP, IVTV_REG_AO); + + IVTV_DEBUG_INFO("pinging (?) APU\n"); + write_reg(IVTV_CMD_APU_PING, IVTV_REG_APU); + + IVTV_DEBUG_INFO("Stopping VPU\n"); + if (!itv->has_cx23415) + write_reg(IVTV_CMD_VPU_STOP16, IVTV_REG_VPU); + else + write_reg(IVTV_CMD_VPU_STOP15, IVTV_REG_VPU); + + IVTV_DEBUG_INFO("Resetting Hw Blocks\n"); + write_reg(IVTV_CMD_HW_BLOCKS_RST, IVTV_REG_HW_BLOCKS); + + IVTV_DEBUG_INFO("Stopping SPU\n"); + write_reg(IVTV_CMD_SPU_STOP, IVTV_REG_SPU); + + ivtv_msleep_timeout(10, 0); + + IVTV_DEBUG_INFO("init Encoder SDRAM pre-charge\n"); + write_reg(IVTV_CMD_SDRAM_PRECHARGE_INIT, IVTV_REG_ENC_SDRAM_PRECHARGE); + + IVTV_DEBUG_INFO("init Encoder SDRAM refresh to 1us\n"); + write_reg(IVTV_CMD_SDRAM_REFRESH_INIT, IVTV_REG_ENC_SDRAM_REFRESH); + + if (itv->has_cx23415) { + IVTV_DEBUG_INFO("init Decoder SDRAM pre-charge\n"); + write_reg(IVTV_CMD_SDRAM_PRECHARGE_INIT, IVTV_REG_DEC_SDRAM_PRECHARGE); + + IVTV_DEBUG_INFO("init Decoder SDRAM refresh to 1us\n"); + write_reg(IVTV_CMD_SDRAM_REFRESH_INIT, IVTV_REG_DEC_SDRAM_REFRESH); + } + + IVTV_DEBUG_INFO("Sleeping for %dms\n", IVTV_SDRAM_SLEEPTIME); + ivtv_msleep_timeout(IVTV_SDRAM_SLEEPTIME, 0); +} + +void ivtv_firmware_versions(struct ivtv *itv) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + + /* Encoder */ + ivtv_vapi_result(itv, data, CX2341X_ENC_GET_VERSION, 0); + IVTV_INFO("Encoder revision: 0x%08x\n", data[0]); + + if (data[0] != 0x02060039) + IVTV_WARN("Recommended firmware version is 0x02060039.\n"); + + if (itv->has_cx23415) { + /* Decoder */ + ivtv_vapi_result(itv, data, CX2341X_DEC_GET_VERSION, 0); + IVTV_INFO("Decoder revision: 0x%08x\n", data[0]); + } +} + +static int ivtv_firmware_copy(struct ivtv *itv) +{ + IVTV_DEBUG_INFO("Loading encoder image\n"); + if (load_fw_direct(CX2341X_FIRM_ENC_FILENAME, + itv->enc_mem, itv, IVTV_FW_ENC_SIZE) != IVTV_FW_ENC_SIZE) { + IVTV_DEBUG_WARN("failed loading encoder firmware\n"); + return -3; + } + if (!itv->has_cx23415) + return 0; + + IVTV_DEBUG_INFO("Loading decoder image\n"); + if (load_fw_direct(CX2341X_FIRM_DEC_FILENAME, + itv->dec_mem, itv, IVTV_FW_DEC_SIZE) != IVTV_FW_DEC_SIZE) { + IVTV_DEBUG_WARN("failed loading decoder firmware\n"); + return -1; + } + return 0; +} + +static volatile struct ivtv_mailbox __iomem *ivtv_search_mailbox(const volatile u8 __iomem *mem, u32 size) +{ + int i; + + /* mailbox is preceded by a 16 byte 'magic cookie' starting at a 256-byte + address boundary */ + for (i = 0; i < size; i += 0x100) { + if (readl(mem + i) == 0x12345678 && + readl(mem + i + 4) == 0x34567812 && + readl(mem + i + 8) == 0x56781234 && + readl(mem + i + 12) == 0x78123456) { + return (volatile struct ivtv_mailbox __iomem *)(mem + i + 16); + } + } + return NULL; +} + +int ivtv_firmware_init(struct ivtv *itv) +{ + int err; + + ivtv_halt_firmware(itv); + + /* load firmware */ + err = ivtv_firmware_copy(itv); + if (err) { + IVTV_DEBUG_WARN("Error %d loading firmware\n", err); + return err; + } + + /* start firmware */ + write_reg(read_reg(IVTV_REG_SPU) & IVTV_MASK_SPU_ENABLE, IVTV_REG_SPU); + ivtv_msleep_timeout(100, 0); + if (itv->has_cx23415) + write_reg(read_reg(IVTV_REG_VPU) & IVTV_MASK_VPU_ENABLE15, IVTV_REG_VPU); + else + write_reg(read_reg(IVTV_REG_VPU) & IVTV_MASK_VPU_ENABLE16, IVTV_REG_VPU); + ivtv_msleep_timeout(100, 0); + + /* find mailboxes and ping firmware */ + itv->enc_mbox.mbox = ivtv_search_mailbox(itv->enc_mem, IVTV_ENCODER_SIZE); + if (itv->enc_mbox.mbox == NULL) + IVTV_ERR("Encoder mailbox not found\n"); + else if (ivtv_vapi(itv, CX2341X_ENC_PING_FW, 0)) { + IVTV_ERR("Encoder firmware dead!\n"); + itv->enc_mbox.mbox = NULL; + } + if (itv->enc_mbox.mbox == NULL) + return -ENODEV; + + if (!itv->has_cx23415) + return 0; + + itv->dec_mbox.mbox = ivtv_search_mailbox(itv->dec_mem, IVTV_DECODER_SIZE); + if (itv->dec_mbox.mbox == NULL) { + IVTV_ERR("Decoder mailbox not found\n"); + } else if (itv->has_cx23415 && ivtv_vapi(itv, CX2341X_DEC_PING_FW, 0)) { + IVTV_ERR("Decoder firmware dead!\n"); + itv->dec_mbox.mbox = NULL; + } else { + /* Firmware okay, so check yuv output filter table */ + ivtv_yuv_filter_check(itv); + } + return itv->dec_mbox.mbox ? 0 : -ENODEV; +} + +void ivtv_init_mpeg_decoder(struct ivtv *itv) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + long readbytes; + volatile u8 __iomem *mem_offset; + + data[0] = 0; + data[1] = itv->cxhdl.width; /* YUV source width */ + data[2] = itv->cxhdl.height; + data[3] = itv->cxhdl.audio_properties; /* Audio settings to use, + bitmap. see docs. */ + if (ivtv_api(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, data)) { + IVTV_ERR("ivtv_init_mpeg_decoder failed to set decoder source\n"); + return; + } + + if (ivtv_vapi(itv, CX2341X_DEC_START_PLAYBACK, 2, 0, 1) != 0) { + IVTV_ERR("ivtv_init_mpeg_decoder failed to start playback\n"); + return; + } + ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 2, data); + mem_offset = itv->dec_mem + data[1]; + + if ((readbytes = load_fw_direct(IVTV_DECODE_INIT_MPEG_FILENAME, + mem_offset, itv, IVTV_DECODE_INIT_MPEG_SIZE)) <= 0) { + IVTV_DEBUG_WARN("failed to read mpeg decoder initialisation file %s\n", + IVTV_DECODE_INIT_MPEG_FILENAME); + } else { + ivtv_vapi(itv, CX2341X_DEC_SCHED_DMA_FROM_HOST, 3, 0, readbytes, 0); + ivtv_msleep_timeout(100, 0); + } + ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 4, 0, 0, 0, 1); +} + +/* Try to restart the card & restore previous settings */ +static int ivtv_firmware_restart(struct ivtv *itv) +{ + int rc = 0; + v4l2_std_id std; + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) + /* Display test image during restart */ + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing, + SAA7127_INPUT_TYPE_TEST_IMAGE, + itv->card->video_outputs[itv->active_output].video_output, + 0); + + mutex_lock(&itv->udma.lock); + + rc = ivtv_firmware_init(itv); + if (rc) { + mutex_unlock(&itv->udma.lock); + return rc; + } + + /* Allow settings to reload */ + ivtv_mailbox_cache_invalidate(itv); + + /* Restore encoder video standard */ + std = itv->std; + itv->std = 0; + ivtv_s_std_enc(itv, std); + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + ivtv_init_mpeg_decoder(itv); + + /* Restore decoder video standard */ + std = itv->std_out; + itv->std_out = 0; + ivtv_s_std_dec(itv, std); + + /* Restore framebuffer if active */ + if (itv->ivtvfb_restore) + itv->ivtvfb_restore(itv); + + /* Restore alpha settings */ + ivtv_set_osd_alpha(itv); + + /* Restore normal output */ + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing, + SAA7127_INPUT_TYPE_NORMAL, + itv->card->video_outputs[itv->active_output].video_output, + 0); + } + + mutex_unlock(&itv->udma.lock); + return rc; +} + +/* Check firmware running state. The checks fall through + allowing multiple failures to be logged. */ +int ivtv_firmware_check(struct ivtv *itv, char *where) +{ + int res = 0; + + /* Check encoder is still running */ + if (ivtv_vapi(itv, CX2341X_ENC_PING_FW, 0) < 0) { + IVTV_WARN("Encoder has died : %s\n", where); + res = -1; + } + + /* Also check audio. Only check if not in use & encoder is okay */ + if (!res && !atomic_read(&itv->capturing) && + (!atomic_read(&itv->decoding) || + (atomic_read(&itv->decoding) < 2 && test_bit(IVTV_F_I_DEC_YUV, + &itv->i_flags)))) { + + if (ivtv_vapi(itv, CX2341X_ENC_MISC, 1, 12) < 0) { + IVTV_WARN("Audio has died (Encoder OK) : %s\n", where); + res = -2; + } + } + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + /* Second audio check. Skip if audio already failed */ + if (res != -2 && read_dec(0x100) != read_dec(0x104)) { + /* Wait & try again to be certain. */ + ivtv_msleep_timeout(14, 0); + if (read_dec(0x100) != read_dec(0x104)) { + IVTV_WARN("Audio has died (Decoder) : %s\n", + where); + res = -1; + } + } + + /* Check decoder is still running */ + if (ivtv_vapi(itv, CX2341X_DEC_PING_FW, 0) < 0) { + IVTV_WARN("Decoder has died : %s\n", where); + res = -1; + } + } + + /* If something failed & currently idle, try to reload */ + if (res && !atomic_read(&itv->capturing) && + !atomic_read(&itv->decoding)) { + IVTV_INFO("Detected in %s that firmware had failed - " + "Reloading\n", where); + res = ivtv_firmware_restart(itv); + /* + * Even if restarted ok, still signal a problem had occurred. + * The caller can come through this function again to check + * if things are really ok after the restart. + */ + if (!res) { + IVTV_INFO("Firmware restart okay\n"); + res = -EAGAIN; + } else { + IVTV_INFO("Firmware restart failed\n"); + } + } else if (res) { + res = -EIO; + } + + return res; +} + +MODULE_FIRMWARE(CX2341X_FIRM_ENC_FILENAME); +MODULE_FIRMWARE(CX2341X_FIRM_DEC_FILENAME); +MODULE_FIRMWARE(IVTV_DECODE_INIT_MPEG_FILENAME); diff --git a/drivers/media/pci/ivtv/ivtv-firmware.h b/drivers/media/pci/ivtv/ivtv-firmware.h new file mode 100644 index 00000000..52bb4e55 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-firmware.h @@ -0,0 +1,31 @@ +/* + ivtv firmware functions. + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_FIRMWARE_H +#define IVTV_FIRMWARE_H + +int ivtv_firmware_init(struct ivtv *itv); +void ivtv_firmware_versions(struct ivtv *itv); +void ivtv_halt_firmware(struct ivtv *itv); +void ivtv_init_mpeg_decoder(struct ivtv *itv); +int ivtv_firmware_check(struct ivtv *itv, char *where); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-gpio.c b/drivers/media/pci/ivtv/ivtv-gpio.c new file mode 100644 index 00000000..af52def7 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-gpio.c @@ -0,0 +1,374 @@ +/* + gpio functions. + Merging GPIO support into driver: + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-cards.h" +#include "ivtv-gpio.h" +#include "tuner-xc2028.h" +#include +#include + +/* + * GPIO assignment of Yuan MPG600/MPG160 + * + * bit 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 + * OUTPUT IN1 IN0 AM3 AM2 AM1 AM0 + * INPUT DM1 DM0 + * + * IN* : Input selection + * IN1 IN0 + * 1 1 N/A + * 1 0 Line + * 0 1 N/A + * 0 0 Tuner + * + * AM* : Audio Mode + * AM3 0: Normal 1: Mixed(Sub+Main channel) + * AM2 0: Subchannel 1: Main channel + * AM1 0: Stereo 1: Mono + * AM0 0: Normal 1: Mute + * + * DM* : Detected tuner audio Mode + * DM1 0: Stereo 1: Mono + * DM0 0: Multiplex 1: Normal + * + * GPIO Initial Settings + * MPG600 MPG160 + * DIR 0x3080 0x7080 + * OUTPUT 0x000C 0x400C + * + * Special thanks to Makoto Iguchi and Mr. Anonymous + * for analyzing GPIO of MPG160. + * + ***************************************************************************** + * + * GPIO assignment of Avermedia M179 (per information direct from AVerMedia) + * + * bit 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 + * OUTPUT IN0 AM0 IN1 AM1 AM2 IN2 BR0 BR1 + * INPUT + * + * IN* : Input selection + * IN0 IN1 IN2 + * * 1 * Mute + * 0 0 0 Line-In + * 1 0 0 TV Tuner Audio + * 0 0 1 FM Audio + * 1 0 1 Mute + * + * AM* : Audio Mode + * AM0 AM1 AM2 + * 0 0 0 TV Tuner Audio: L_OUT=(L+R)/2, R_OUT=SAP + * 0 0 1 TV Tuner Audio: L_OUT=R_OUT=SAP (SAP) + * 0 1 0 TV Tuner Audio: L_OUT=L, R_OUT=R (stereo) + * 0 1 1 TV Tuner Audio: mute + * 1 * * TV Tuner Audio: L_OUT=R_OUT=(L+R)/2 (mono) + * + * BR* : Audio Sample Rate (BR stands for bitrate for some reason) + * BR0 BR1 + * 0 0 32 kHz + * 0 1 44.1 kHz + * 1 0 48 kHz + * + * DM* : Detected tuner audio Mode + * Unknown currently + * + * Special thanks to AVerMedia Technologies, Inc. and Jiun-Kuei Jung at + * AVerMedia for providing the GPIO information used to add support + * for the M179 cards. + */ + +/********************* GPIO stuffs *********************/ + +/* GPIO registers */ +#define IVTV_REG_GPIO_IN 0x9008 +#define IVTV_REG_GPIO_OUT 0x900c +#define IVTV_REG_GPIO_DIR 0x9020 + +void ivtv_reset_ir_gpio(struct ivtv *itv) +{ + int curdir, curout; + + if (itv->card->type != IVTV_CARD_PVR_150) + return; + IVTV_DEBUG_INFO("Resetting PVR150 IR\n"); + curout = read_reg(IVTV_REG_GPIO_OUT); + curdir = read_reg(IVTV_REG_GPIO_DIR); + curdir |= 0x80; + write_reg(curdir, IVTV_REG_GPIO_DIR); + curout = (curout & ~0xF) | 1; + write_reg(curout, IVTV_REG_GPIO_OUT); + /* We could use something else for smaller time */ + schedule_timeout_interruptible(msecs_to_jiffies(1)); + curout |= 2; + write_reg(curout, IVTV_REG_GPIO_OUT); + curdir &= ~0x80; + write_reg(curdir, IVTV_REG_GPIO_DIR); +} + +/* Xceive tuner reset function */ +int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value) +{ + struct i2c_algo_bit_data *algo = dev; + struct ivtv *itv = algo->data; + u32 curout; + + if (cmd != XC2028_TUNER_RESET) + return 0; + IVTV_DEBUG_INFO("Resetting tuner\n"); + curout = read_reg(IVTV_REG_GPIO_OUT); + curout &= ~(1 << itv->card->xceive_pin); + write_reg(curout, IVTV_REG_GPIO_OUT); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + + curout |= 1 << itv->card->xceive_pin; + write_reg(curout, IVTV_REG_GPIO_OUT); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + return 0; +} + +static inline struct ivtv *sd_to_ivtv(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ivtv, sd_gpio); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ivtv, hdl_gpio)->sd_gpio; +} + +static int subdev_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct ivtv *itv = sd_to_ivtv(sd); + u16 mask, data; + + mask = itv->card->gpio_audio_freq.mask; + switch (freq) { + case 32000: + data = itv->card->gpio_audio_freq.f32000; + break; + case 44100: + data = itv->card->gpio_audio_freq.f44100; + break; + case 48000: + default: + data = itv->card->gpio_audio_freq.f48000; + break; + } + if (mask) + write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | (data & mask), IVTV_REG_GPIO_OUT); + return 0; +} + +static int subdev_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct ivtv *itv = sd_to_ivtv(sd); + u16 mask; + + mask = itv->card->gpio_audio_detect.mask; + if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask)) + vt->rxsubchans = V4L2_TUNER_SUB_STEREO | + V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + else + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + return 0; +} + +static int subdev_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) +{ + struct ivtv *itv = sd_to_ivtv(sd); + u16 mask, data; + + mask = itv->card->gpio_audio_mode.mask; + switch (vt->audmode) { + case V4L2_TUNER_MODE_LANG1: + data = itv->card->gpio_audio_mode.lang1; + break; + case V4L2_TUNER_MODE_LANG2: + data = itv->card->gpio_audio_mode.lang2; + break; + case V4L2_TUNER_MODE_MONO: + data = itv->card->gpio_audio_mode.mono; + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + default: + data = itv->card->gpio_audio_mode.stereo; + break; + } + if (mask) + write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | (data & mask), IVTV_REG_GPIO_OUT); + return 0; +} + +static int subdev_s_radio(struct v4l2_subdev *sd) +{ + struct ivtv *itv = sd_to_ivtv(sd); + u16 mask, data; + + mask = itv->card->gpio_audio_input.mask; + data = itv->card->gpio_audio_input.radio; + if (mask) + write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | (data & mask), IVTV_REG_GPIO_OUT); + return 0; +} + +static int subdev_s_audio_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct ivtv *itv = sd_to_ivtv(sd); + u16 mask, data; + + if (input > 2) + return -EINVAL; + mask = itv->card->gpio_audio_input.mask; + switch (input) { + case 0: + data = itv->card->gpio_audio_input.tuner; + break; + case 1: + data = itv->card->gpio_audio_input.linein; + break; + case 2: + default: + data = itv->card->gpio_audio_input.radio; + break; + } + if (mask) + write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | (data & mask), IVTV_REG_GPIO_OUT); + return 0; +} + +static int subdev_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct ivtv *itv = sd_to_ivtv(sd); + u16 mask, data; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + mask = itv->card->gpio_audio_mute.mask; + data = ctrl->val ? itv->card->gpio_audio_mute.mute : 0; + if (mask) + write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | + (data & mask), IVTV_REG_GPIO_OUT); + return 0; + } + return -EINVAL; +} + + +static int subdev_log_status(struct v4l2_subdev *sd) +{ + struct ivtv *itv = sd_to_ivtv(sd); + + IVTV_INFO("GPIO status: DIR=0x%04x OUT=0x%04x IN=0x%04x\n", + read_reg(IVTV_REG_GPIO_DIR), read_reg(IVTV_REG_GPIO_OUT), + read_reg(IVTV_REG_GPIO_IN)); + v4l2_ctrl_handler_log_status(&itv->hdl_gpio, sd->name); + return 0; +} + +static int subdev_s_video_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct ivtv *itv = sd_to_ivtv(sd); + u16 mask, data; + + if (input > 2) /* 0:Tuner 1:Composite 2:S-Video */ + return -EINVAL; + mask = itv->card->gpio_video_input.mask; + if (input == 0) + data = itv->card->gpio_video_input.tuner; + else if (input == 1) + data = itv->card->gpio_video_input.composite; + else + data = itv->card->gpio_video_input.svideo; + if (mask) + write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | (data & mask), IVTV_REG_GPIO_OUT); + return 0; +} + +static const struct v4l2_ctrl_ops gpio_ctrl_ops = { + .s_ctrl = subdev_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops subdev_core_ops = { + .log_status = subdev_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_tuner_ops subdev_tuner_ops = { + .s_radio = subdev_s_radio, + .g_tuner = subdev_g_tuner, + .s_tuner = subdev_s_tuner, +}; + +static const struct v4l2_subdev_audio_ops subdev_audio_ops = { + .s_clock_freq = subdev_s_clock_freq, + .s_routing = subdev_s_audio_routing, +}; + +static const struct v4l2_subdev_video_ops subdev_video_ops = { + .s_routing = subdev_s_video_routing, +}; + +static const struct v4l2_subdev_ops subdev_ops = { + .core = &subdev_core_ops, + .tuner = &subdev_tuner_ops, + .audio = &subdev_audio_ops, + .video = &subdev_video_ops, +}; + +int ivtv_gpio_init(struct ivtv *itv) +{ + u16 pin = 0; + + if (itv->card->xceive_pin) + pin = 1 << itv->card->xceive_pin; + + if ((itv->card->gpio_init.direction | pin) == 0) + return 0; + + IVTV_DEBUG_INFO("GPIO initial dir: %08x out: %08x\n", + read_reg(IVTV_REG_GPIO_DIR), read_reg(IVTV_REG_GPIO_OUT)); + + /* init output data then direction */ + write_reg(itv->card->gpio_init.initial_value | pin, IVTV_REG_GPIO_OUT); + write_reg(itv->card->gpio_init.direction | pin, IVTV_REG_GPIO_DIR); + v4l2_subdev_init(&itv->sd_gpio, &subdev_ops); + snprintf(itv->sd_gpio.name, sizeof(itv->sd_gpio.name), "%s-gpio", itv->v4l2_dev.name); + itv->sd_gpio.grp_id = IVTV_HW_GPIO; + v4l2_ctrl_handler_init(&itv->hdl_gpio, 1); + v4l2_ctrl_new_std(&itv->hdl_gpio, &gpio_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + if (itv->hdl_gpio.error) + return itv->hdl_gpio.error; + itv->sd_gpio.ctrl_handler = &itv->hdl_gpio; + v4l2_ctrl_handler_setup(&itv->hdl_gpio); + return v4l2_device_register_subdev(&itv->v4l2_dev, &itv->sd_gpio); +} diff --git a/drivers/media/pci/ivtv/ivtv-gpio.h b/drivers/media/pci/ivtv/ivtv-gpio.h new file mode 100644 index 00000000..0b5d19c8 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-gpio.h @@ -0,0 +1,29 @@ +/* + gpio functions. + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_GPIO_H +#define IVTV_GPIO_H + +/* GPIO stuff */ +int ivtv_gpio_init(struct ivtv *itv); +void ivtv_reset_ir_gpio(struct ivtv *itv); +int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-i2c.c b/drivers/media/pci/ivtv/ivtv-i2c.c new file mode 100644 index 00000000..ceed2d87 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-i2c.c @@ -0,0 +1,754 @@ +/* + I2C functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + This file includes an i2c implementation that was reverse engineered + from the Hauppauge windows driver. Older ivtv versions used i2c-algo-bit, + which whilst fine under most circumstances, had trouble with the Zilog + CPU on the PVR-150 which handles IR functions (occasional inability to + communicate with the chip until it was reset) and also with the i2c + bus being completely unreachable when multiple PVR cards were present. + + The implementation is very similar to i2c-algo-bit, but there are enough + subtle differences that the two are hard to merge. The general strategy + employed by i2c-algo-bit is to use udelay() to implement the timing + when putting out bits on the scl/sda lines. The general strategy taken + here is to poll the lines for state changes (see ivtv_waitscl and + ivtv_waitsda). In addition there are small delays at various locations + which poll the SCL line 5 times (ivtv_scldelay). I would guess that + since this is memory mapped I/O that the length of those delays is tied + to the PCI bus clock. There is some extra code to do with recovery + and retries. Since it is not known what causes the actual i2c problems + in the first place, the only goal if one was to attempt to use + i2c-algo-bit would be to try to make it follow the same code path. + This would be a lot of work, and I'm also not convinced that it would + provide a generic benefit to i2c-algo-bit. Therefore consider this + an engineering solution -- not pretty, but it works. + + Some more general comments about what we are doing: + + The i2c bus is a 2 wire serial bus, with clock (SCL) and data (SDA) + lines. To communicate on the bus (as a master, we don't act as a slave), + we first initiate a start condition (ivtv_start). We then write the + address of the device that we want to communicate with, along with a flag + that indicates whether this is a read or a write. The slave then issues + an ACK signal (ivtv_ack), which tells us that it is ready for reading / + writing. We then proceed with reading or writing (ivtv_read/ivtv_write), + and finally issue a stop condition (ivtv_stop) to make the bus available + to other masters. + + There is an additional form of transaction where a write may be + immediately followed by a read. In this case, there is no intervening + stop condition. (Only the msp3400 chip uses this method of data transfer). + */ + +#include "ivtv-driver.h" +#include "ivtv-cards.h" +#include "ivtv-gpio.h" +#include "ivtv-i2c.h" +#include + +/* i2c implementation for cx23415/6 chip, ivtv project. + * Author: Kevin Thayer (nufan_wfk at yahoo.com) + */ +/* i2c stuff */ +#define IVTV_REG_I2C_SETSCL_OFFSET 0x7000 +#define IVTV_REG_I2C_SETSDA_OFFSET 0x7004 +#define IVTV_REG_I2C_GETSCL_OFFSET 0x7008 +#define IVTV_REG_I2C_GETSDA_OFFSET 0x700c + +#define IVTV_CS53L32A_I2C_ADDR 0x11 +#define IVTV_M52790_I2C_ADDR 0x48 +#define IVTV_CX25840_I2C_ADDR 0x44 +#define IVTV_SAA7115_I2C_ADDR 0x21 +#define IVTV_SAA7127_I2C_ADDR 0x44 +#define IVTV_SAA717x_I2C_ADDR 0x21 +#define IVTV_MSP3400_I2C_ADDR 0x40 +#define IVTV_HAUPPAUGE_I2C_ADDR 0x50 +#define IVTV_WM8739_I2C_ADDR 0x1a +#define IVTV_WM8775_I2C_ADDR 0x1b +#define IVTV_TEA5767_I2C_ADDR 0x60 +#define IVTV_UPD64031A_I2C_ADDR 0x12 +#define IVTV_UPD64083_I2C_ADDR 0x5c +#define IVTV_VP27SMPX_I2C_ADDR 0x5b +#define IVTV_M52790_I2C_ADDR 0x48 +#define IVTV_AVERMEDIA_IR_RX_I2C_ADDR 0x40 +#define IVTV_HAUP_EXT_IR_RX_I2C_ADDR 0x1a +#define IVTV_HAUP_INT_IR_RX_I2C_ADDR 0x18 +#define IVTV_Z8F0811_IR_TX_I2C_ADDR 0x70 +#define IVTV_Z8F0811_IR_RX_I2C_ADDR 0x71 +#define IVTV_ADAPTEC_IR_ADDR 0x6b + +/* This array should match the IVTV_HW_ defines */ +static const u8 hw_addrs[] = { + IVTV_CX25840_I2C_ADDR, + IVTV_SAA7115_I2C_ADDR, + IVTV_SAA7127_I2C_ADDR, + IVTV_MSP3400_I2C_ADDR, + 0, + IVTV_WM8775_I2C_ADDR, + IVTV_CS53L32A_I2C_ADDR, + 0, + IVTV_SAA7115_I2C_ADDR, + IVTV_UPD64031A_I2C_ADDR, + IVTV_UPD64083_I2C_ADDR, + IVTV_SAA717x_I2C_ADDR, + IVTV_WM8739_I2C_ADDR, + IVTV_VP27SMPX_I2C_ADDR, + IVTV_M52790_I2C_ADDR, + 0, /* IVTV_HW_GPIO dummy driver ID */ + IVTV_AVERMEDIA_IR_RX_I2C_ADDR, /* IVTV_HW_I2C_IR_RX_AVER */ + IVTV_HAUP_EXT_IR_RX_I2C_ADDR, /* IVTV_HW_I2C_IR_RX_HAUP_EXT */ + IVTV_HAUP_INT_IR_RX_I2C_ADDR, /* IVTV_HW_I2C_IR_RX_HAUP_INT */ + IVTV_Z8F0811_IR_TX_I2C_ADDR, /* IVTV_HW_Z8F0811_IR_TX_HAUP */ + IVTV_Z8F0811_IR_RX_I2C_ADDR, /* IVTV_HW_Z8F0811_IR_RX_HAUP */ + IVTV_ADAPTEC_IR_ADDR, /* IVTV_HW_I2C_IR_RX_ADAPTEC */ +}; + +/* This array should match the IVTV_HW_ defines */ +static const char * const hw_devicenames[] = { + "cx25840", + "saa7115", + "saa7127_auto", /* saa7127 or saa7129 */ + "msp3400", + "tuner", + "wm8775", + "cs53l32a", + "tveeprom", + "saa7114", + "upd64031a", + "upd64083", + "saa717x", + "wm8739", + "vp27smpx", + "m52790", + "gpio", + "ir_video", /* IVTV_HW_I2C_IR_RX_AVER */ + "ir_video", /* IVTV_HW_I2C_IR_RX_HAUP_EXT */ + "ir_video", /* IVTV_HW_I2C_IR_RX_HAUP_INT */ + "ir_tx_z8f0811_haup", /* IVTV_HW_Z8F0811_IR_TX_HAUP */ + "ir_rx_z8f0811_haup", /* IVTV_HW_Z8F0811_IR_RX_HAUP */ + "ir_video", /* IVTV_HW_I2C_IR_RX_ADAPTEC */ +}; + +static int get_key_adaptec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char keybuf[4]; + + keybuf[0] = 0x00; + i2c_master_send(ir->c, keybuf, 1); + /* poll IR chip */ + if (i2c_master_recv(ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) { + return 0; + } + + /* key pressed ? */ + if (keybuf[2] == 0xff) + return 0; + + /* remove repeat bit */ + keybuf[2] &= 0x7f; + keybuf[3] |= 0x80; + + *ir_key = keybuf[3] | keybuf[2] << 8 | keybuf[1] << 16 |keybuf[0] << 24; + *ir_raw = *ir_key; + + return 1; +} + +static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr) +{ + struct i2c_board_info info; + struct i2c_adapter *adap = &itv->i2c_adap; + struct IR_i2c_init_data *init_data = &itv->ir_i2c_init_data; + unsigned short addr_list[2] = { addr, I2C_CLIENT_END }; + + /* Only allow one IR transmitter to be registered per board */ + if (hw & IVTV_HW_IR_TX_ANY) { + if (itv->hw_flags & IVTV_HW_IR_TX_ANY) + return -1; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, type, I2C_NAME_SIZE); + return i2c_new_probed_device(adap, &info, addr_list, NULL) + == NULL ? -1 : 0; + } + + /* Only allow one IR receiver to be registered per board */ + if (itv->hw_flags & IVTV_HW_IR_RX_ANY) + return -1; + + /* Our default information for ir-kbd-i2c.c to use */ + switch (hw) { + case IVTV_HW_I2C_IR_RX_AVER: + init_data->ir_codes = RC_MAP_AVERMEDIA_CARDBUS; + init_data->internal_get_key_func = + IR_KBD_GET_KEY_AVERMEDIA_CARDBUS; + init_data->type = RC_BIT_OTHER; + init_data->name = "AVerMedia AVerTV card"; + break; + case IVTV_HW_I2C_IR_RX_HAUP_EXT: + case IVTV_HW_I2C_IR_RX_HAUP_INT: + init_data->ir_codes = RC_MAP_HAUPPAUGE; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP; + init_data->type = RC_BIT_RC5; + init_data->name = itv->card_name; + break; + case IVTV_HW_Z8F0811_IR_RX_HAUP: + /* Default to grey remote */ + init_data->ir_codes = RC_MAP_HAUPPAUGE; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; + init_data->type = RC_BIT_RC5; + init_data->name = itv->card_name; + break; + case IVTV_HW_I2C_IR_RX_ADAPTEC: + init_data->get_key = get_key_adaptec; + init_data->name = itv->card_name; + /* FIXME: The protocol and RC_MAP needs to be corrected */ + init_data->ir_codes = RC_MAP_EMPTY; + init_data->type = RC_BIT_UNKNOWN; + break; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.platform_data = init_data; + strlcpy(info.type, type, I2C_NAME_SIZE); + + return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ? + -1 : 0; +} + +/* Instantiate the IR receiver device using probing -- undesirable */ +struct i2c_client *ivtv_i2c_new_ir_legacy(struct ivtv *itv) +{ + struct i2c_board_info info; + /* + * The external IR receiver is at i2c address 0x34. + * The internal IR receiver is at i2c address 0x30. + * + * In theory, both can be fitted, and Hauppauge suggests an external + * overrides an internal. That's why we probe 0x1a (~0x34) first. CB + * + * Some of these addresses we probe may collide with other i2c address + * allocations, so this function must be called after all other i2c + * devices we care about are registered. + */ + const unsigned short addr_list[] = { + 0x1a, /* Hauppauge IR external - collides with WM8739 */ + 0x18, /* Hauppauge IR internal */ + I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + return i2c_new_probed_device(&itv->i2c_adap, &info, addr_list, NULL); +} + +int ivtv_i2c_register(struct ivtv *itv, unsigned idx) +{ + struct v4l2_subdev *sd; + struct i2c_adapter *adap = &itv->i2c_adap; + const char *type = hw_devicenames[idx]; + u32 hw = 1 << idx; + + if (hw == IVTV_HW_TUNER) { + /* special tuner handling */ + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0, + itv->card_i2c->radio); + if (sd) + sd->grp_id = 1 << idx; + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0, + itv->card_i2c->demod); + if (sd) + sd->grp_id = 1 << idx; + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0, + itv->card_i2c->tv); + if (sd) + sd->grp_id = 1 << idx; + return sd ? 0 : -1; + } + + if (hw & IVTV_HW_IR_ANY) + return ivtv_i2c_new_ir(itv, hw, type, hw_addrs[idx]); + + /* Is it not an I2C device or one we do not wish to register? */ + if (!hw_addrs[idx]) + return -1; + + /* It's an I2C device other than an analog tuner or IR chip */ + if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) { + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, + adap, type, 0, I2C_ADDRS(hw_addrs[idx])); + } else if (hw == IVTV_HW_CX25840) { + struct cx25840_platform_data pdata; + struct i2c_board_info cx25840_info = { + .type = "cx25840", + .addr = hw_addrs[idx], + .platform_data = &pdata, + }; + + pdata.pvr150_workaround = itv->pvr150_workaround; + sd = v4l2_i2c_new_subdev_board(&itv->v4l2_dev, adap, + &cx25840_info, NULL); + } else { + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, + adap, type, hw_addrs[idx], NULL); + } + if (sd) + sd->grp_id = 1 << idx; + return sd ? 0 : -1; +} + +struct v4l2_subdev *ivtv_find_hw(struct ivtv *itv, u32 hw) +{ + struct v4l2_subdev *result = NULL; + struct v4l2_subdev *sd; + + spin_lock(&itv->v4l2_dev.lock); + v4l2_device_for_each_subdev(sd, &itv->v4l2_dev) { + if (sd->grp_id == hw) { + result = sd; + break; + } + } + spin_unlock(&itv->v4l2_dev.lock); + return result; +} + +/* Set the serial clock line to the desired state */ +static void ivtv_setscl(struct ivtv *itv, int state) +{ + /* write them out */ + /* write bits are inverted */ + write_reg(~state, IVTV_REG_I2C_SETSCL_OFFSET); +} + +/* Set the serial data line to the desired state */ +static void ivtv_setsda(struct ivtv *itv, int state) +{ + /* write them out */ + /* write bits are inverted */ + write_reg(~state & 1, IVTV_REG_I2C_SETSDA_OFFSET); +} + +/* Read the serial clock line */ +static int ivtv_getscl(struct ivtv *itv) +{ + return read_reg(IVTV_REG_I2C_GETSCL_OFFSET) & 1; +} + +/* Read the serial data line */ +static int ivtv_getsda(struct ivtv *itv) +{ + return read_reg(IVTV_REG_I2C_GETSDA_OFFSET) & 1; +} + +/* Implement a short delay by polling the serial clock line */ +static void ivtv_scldelay(struct ivtv *itv) +{ + int i; + + for (i = 0; i < 5; ++i) + ivtv_getscl(itv); +} + +/* Wait for the serial clock line to become set to a specific value */ +static int ivtv_waitscl(struct ivtv *itv, int val) +{ + int i; + + ivtv_scldelay(itv); + for (i = 0; i < 1000; ++i) { + if (ivtv_getscl(itv) == val) + return 1; + } + return 0; +} + +/* Wait for the serial data line to become set to a specific value */ +static int ivtv_waitsda(struct ivtv *itv, int val) +{ + int i; + + ivtv_scldelay(itv); + for (i = 0; i < 1000; ++i) { + if (ivtv_getsda(itv) == val) + return 1; + } + return 0; +} + +/* Wait for the slave to issue an ACK */ +static int ivtv_ack(struct ivtv *itv) +{ + int ret = 0; + + if (ivtv_getscl(itv) == 1) { + IVTV_DEBUG_HI_I2C("SCL was high starting an ack\n"); + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("Could not set SCL low starting an ack\n"); + return -EREMOTEIO; + } + } + ivtv_setsda(itv, 1); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + if (!ivtv_waitsda(itv, 0)) { + IVTV_DEBUG_I2C("Slave did not ack\n"); + ret = -EREMOTEIO; + } + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("Failed to set SCL low after ACK\n"); + ret = -EREMOTEIO; + } + return ret; +} + +/* Write a single byte to the i2c bus and wait for the slave to ACK */ +static int ivtv_sendbyte(struct ivtv *itv, unsigned char byte) +{ + int i, bit; + + IVTV_DEBUG_HI_I2C("write %x\n",byte); + for (i = 0; i < 8; ++i, byte<<=1) { + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("Error setting SCL low\n"); + return -EREMOTEIO; + } + bit = (byte>>7)&1; + ivtv_setsda(itv, bit); + if (!ivtv_waitsda(itv, bit)) { + IVTV_DEBUG_I2C("Error setting SDA\n"); + return -EREMOTEIO; + } + ivtv_setscl(itv, 1); + if (!ivtv_waitscl(itv, 1)) { + IVTV_DEBUG_I2C("Slave not ready for bit\n"); + return -EREMOTEIO; + } + } + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("Error setting SCL low\n"); + return -EREMOTEIO; + } + return ivtv_ack(itv); +} + +/* Read a byte from the i2c bus and send a NACK if applicable (i.e. for the + final byte) */ +static int ivtv_readbyte(struct ivtv *itv, unsigned char *byte, int nack) +{ + int i; + + *byte = 0; + + ivtv_setsda(itv, 1); + ivtv_scldelay(itv); + for (i = 0; i < 8; ++i) { + ivtv_setscl(itv, 0); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + if (!ivtv_waitscl(itv, 1)) { + IVTV_DEBUG_I2C("Error setting SCL high\n"); + return -EREMOTEIO; + } + *byte = ((*byte)<<1)|ivtv_getsda(itv); + } + ivtv_setscl(itv, 0); + ivtv_scldelay(itv); + ivtv_setsda(itv, nack); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + ivtv_scldelay(itv); + ivtv_setscl(itv, 0); + ivtv_scldelay(itv); + IVTV_DEBUG_HI_I2C("read %x\n",*byte); + return 0; +} + +/* Issue a start condition on the i2c bus to alert slaves to prepare for + an address write */ +static int ivtv_start(struct ivtv *itv) +{ + int sda; + + sda = ivtv_getsda(itv); + if (sda != 1) { + IVTV_DEBUG_HI_I2C("SDA was low at start\n"); + ivtv_setsda(itv, 1); + if (!ivtv_waitsda(itv, 1)) { + IVTV_DEBUG_I2C("SDA stuck low\n"); + return -EREMOTEIO; + } + } + if (ivtv_getscl(itv) != 1) { + ivtv_setscl(itv, 1); + if (!ivtv_waitscl(itv, 1)) { + IVTV_DEBUG_I2C("SCL stuck low at start\n"); + return -EREMOTEIO; + } + } + ivtv_setsda(itv, 0); + ivtv_scldelay(itv); + return 0; +} + +/* Issue a stop condition on the i2c bus to release it */ +static int ivtv_stop(struct ivtv *itv) +{ + int i; + + if (ivtv_getscl(itv) != 0) { + IVTV_DEBUG_HI_I2C("SCL not low when stopping\n"); + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("SCL could not be set low\n"); + } + } + ivtv_setsda(itv, 0); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + if (!ivtv_waitscl(itv, 1)) { + IVTV_DEBUG_I2C("SCL could not be set high\n"); + return -EREMOTEIO; + } + ivtv_scldelay(itv); + ivtv_setsda(itv, 1); + if (!ivtv_waitsda(itv, 1)) { + IVTV_DEBUG_I2C("resetting I2C\n"); + for (i = 0; i < 16; ++i) { + ivtv_setscl(itv, 0); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + ivtv_scldelay(itv); + ivtv_setsda(itv, 1); + } + ivtv_waitsda(itv, 1); + return -EREMOTEIO; + } + return 0; +} + +/* Write a message to the given i2c slave. do_stop may be 0 to prevent + issuing the i2c stop condition (when following with a read) */ +static int ivtv_write(struct ivtv *itv, unsigned char addr, unsigned char *data, u32 len, int do_stop) +{ + int retry, ret = -EREMOTEIO; + u32 i; + + for (retry = 0; ret != 0 && retry < 8; ++retry) { + ret = ivtv_start(itv); + + if (ret == 0) { + ret = ivtv_sendbyte(itv, addr<<1); + for (i = 0; ret == 0 && i < len; ++i) + ret = ivtv_sendbyte(itv, data[i]); + } + if (ret != 0 || do_stop) { + ivtv_stop(itv); + } + } + if (ret) + IVTV_DEBUG_I2C("i2c write to %x failed\n", addr); + return ret; +} + +/* Read data from the given i2c slave. A stop condition is always issued. */ +static int ivtv_read(struct ivtv *itv, unsigned char addr, unsigned char *data, u32 len) +{ + int retry, ret = -EREMOTEIO; + u32 i; + + for (retry = 0; ret != 0 && retry < 8; ++retry) { + ret = ivtv_start(itv); + if (ret == 0) + ret = ivtv_sendbyte(itv, (addr << 1) | 1); + for (i = 0; ret == 0 && i < len; ++i) { + ret = ivtv_readbyte(itv, &data[i], i == len - 1); + } + ivtv_stop(itv); + } + if (ret) + IVTV_DEBUG_I2C("i2c read from %x failed\n", addr); + return ret; +} + +/* Kernel i2c transfer implementation. Takes a number of messages to be read + or written. If a read follows a write, this will occur without an + intervening stop condition */ +static int ivtv_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) +{ + struct v4l2_device *v4l2_dev = i2c_get_adapdata(i2c_adap); + struct ivtv *itv = to_ivtv(v4l2_dev); + int retval; + int i; + + mutex_lock(&itv->i2c_bus_lock); + for (i = retval = 0; retval == 0 && i < num; i++) { + if (msgs[i].flags & I2C_M_RD) + retval = ivtv_read(itv, msgs[i].addr, msgs[i].buf, msgs[i].len); + else { + /* if followed by a read, don't stop */ + int stop = !(i + 1 < num && msgs[i + 1].flags == I2C_M_RD); + + retval = ivtv_write(itv, msgs[i].addr, msgs[i].buf, msgs[i].len, stop); + } + } + mutex_unlock(&itv->i2c_bus_lock); + return retval ? retval : num; +} + +/* Kernel i2c capabilities */ +static u32 ivtv_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm ivtv_algo = { + .master_xfer = ivtv_xfer, + .functionality = ivtv_functionality, +}; + +/* template for our-bit banger */ +static struct i2c_adapter ivtv_i2c_adap_hw_template = { + .name = "ivtv i2c driver", + .algo = &ivtv_algo, + .algo_data = NULL, /* filled from template */ + .owner = THIS_MODULE, +}; + +static void ivtv_setscl_old(void *data, int state) +{ + struct ivtv *itv = (struct ivtv *)data; + + if (state) + itv->i2c_state |= 0x01; + else + itv->i2c_state &= ~0x01; + + /* write them out */ + /* write bits are inverted */ + write_reg(~itv->i2c_state, IVTV_REG_I2C_SETSCL_OFFSET); +} + +static void ivtv_setsda_old(void *data, int state) +{ + struct ivtv *itv = (struct ivtv *)data; + + if (state) + itv->i2c_state |= 0x01; + else + itv->i2c_state &= ~0x01; + + /* write them out */ + /* write bits are inverted */ + write_reg(~itv->i2c_state, IVTV_REG_I2C_SETSDA_OFFSET); +} + +static int ivtv_getscl_old(void *data) +{ + struct ivtv *itv = (struct ivtv *)data; + + return read_reg(IVTV_REG_I2C_GETSCL_OFFSET) & 1; +} + +static int ivtv_getsda_old(void *data) +{ + struct ivtv *itv = (struct ivtv *)data; + + return read_reg(IVTV_REG_I2C_GETSDA_OFFSET) & 1; +} + +/* template for i2c-bit-algo */ +static struct i2c_adapter ivtv_i2c_adap_template = { + .name = "ivtv i2c driver", + .algo = NULL, /* set by i2c-algo-bit */ + .algo_data = NULL, /* filled from template */ + .owner = THIS_MODULE, +}; + +#define IVTV_ALGO_BIT_TIMEOUT (2) /* seconds */ + +static const struct i2c_algo_bit_data ivtv_i2c_algo_template = { + .setsda = ivtv_setsda_old, + .setscl = ivtv_setscl_old, + .getsda = ivtv_getsda_old, + .getscl = ivtv_getscl_old, + .udelay = IVTV_DEFAULT_I2C_CLOCK_PERIOD / 2, /* microseconds */ + .timeout = IVTV_ALGO_BIT_TIMEOUT * HZ, /* jiffies */ +}; + +static struct i2c_client ivtv_i2c_client_template = { + .name = "ivtv internal", +}; + +/* init + register i2c adapter */ +int init_ivtv_i2c(struct ivtv *itv) +{ + int retval; + + IVTV_DEBUG_I2C("i2c init\n"); + + /* Sanity checks for the I2C hardware arrays. They must be the + * same size. + */ + if (ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_addrs)) { + IVTV_ERR("Mismatched I2C hardware arrays\n"); + return -ENODEV; + } + if (itv->options.newi2c > 0) { + itv->i2c_adap = ivtv_i2c_adap_hw_template; + } else { + itv->i2c_adap = ivtv_i2c_adap_template; + itv->i2c_algo = ivtv_i2c_algo_template; + } + itv->i2c_algo.udelay = itv->options.i2c_clock_period / 2; + itv->i2c_algo.data = itv; + itv->i2c_adap.algo_data = &itv->i2c_algo; + + sprintf(itv->i2c_adap.name + strlen(itv->i2c_adap.name), " #%d", + itv->instance); + i2c_set_adapdata(&itv->i2c_adap, &itv->v4l2_dev); + + itv->i2c_client = ivtv_i2c_client_template; + itv->i2c_client.adapter = &itv->i2c_adap; + itv->i2c_adap.dev.parent = &itv->pdev->dev; + + IVTV_DEBUG_I2C("setting scl and sda to 1\n"); + ivtv_setscl(itv, 1); + ivtv_setsda(itv, 1); + + if (itv->options.newi2c > 0) + retval = i2c_add_adapter(&itv->i2c_adap); + else + retval = i2c_bit_add_bus(&itv->i2c_adap); + + return retval; +} + +void exit_ivtv_i2c(struct ivtv *itv) +{ + IVTV_DEBUG_I2C("i2c exit\n"); + + i2c_del_adapter(&itv->i2c_adap); +} diff --git a/drivers/media/pci/ivtv/ivtv-i2c.h b/drivers/media/pci/ivtv/ivtv-i2c.h new file mode 100644 index 00000000..7b9ec1cf --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-i2c.h @@ -0,0 +1,32 @@ +/* + I2C functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_I2C_H +#define IVTV_I2C_H + +struct i2c_client *ivtv_i2c_new_ir_legacy(struct ivtv *itv); +int ivtv_i2c_register(struct ivtv *itv, unsigned idx); +struct v4l2_subdev *ivtv_find_hw(struct ivtv *itv, u32 hw); + +/* init + register i2c adapter */ +int init_ivtv_i2c(struct ivtv *itv); +void exit_ivtv_i2c(struct ivtv *itv); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c new file mode 100644 index 00000000..9cbbce0e --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-ioctl.c @@ -0,0 +1,1930 @@ +/* + ioctl system call + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-version.h" +#include "ivtv-mailbox.h" +#include "ivtv-i2c.h" +#include "ivtv-queue.h" +#include "ivtv-fileops.h" +#include "ivtv-vbi.h" +#include "ivtv-routing.h" +#include "ivtv-streams.h" +#include "ivtv-yuv.h" +#include "ivtv-ioctl.h" +#include "ivtv-gpio.h" +#include "ivtv-controls.h" +#include "ivtv-cards.h" +#include +#include +#include +#include +#include + +u16 ivtv_service2vbi(int type) +{ + switch (type) { + case V4L2_SLICED_TELETEXT_B: + return IVTV_SLICED_TYPE_TELETEXT_B; + case V4L2_SLICED_CAPTION_525: + return IVTV_SLICED_TYPE_CAPTION_525; + case V4L2_SLICED_WSS_625: + return IVTV_SLICED_TYPE_WSS_625; + case V4L2_SLICED_VPS: + return IVTV_SLICED_TYPE_VPS; + default: + return 0; + } +} + +static int valid_service_line(int field, int line, int is_pal) +{ + return (is_pal && line >= 6 && (line != 23 || field == 0)) || + (!is_pal && line >= 10 && line < 22); +} + +static u16 select_service_from_set(int field, int line, u16 set, int is_pal) +{ + u16 valid_set = (is_pal ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525); + int i; + + set = set & valid_set; + if (set == 0 || !valid_service_line(field, line, is_pal)) { + return 0; + } + if (!is_pal) { + if (line == 21 && (set & V4L2_SLICED_CAPTION_525)) + return V4L2_SLICED_CAPTION_525; + } + else { + if (line == 16 && field == 0 && (set & V4L2_SLICED_VPS)) + return V4L2_SLICED_VPS; + if (line == 23 && field == 0 && (set & V4L2_SLICED_WSS_625)) + return V4L2_SLICED_WSS_625; + if (line == 23) + return 0; + } + for (i = 0; i < 32; i++) { + if ((1 << i) & set) + return 1 << i; + } + return 0; +} + +void ivtv_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +{ + u16 set = fmt->service_set; + int f, l; + + fmt->service_set = 0; + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + fmt->service_lines[f][l] = select_service_from_set(f, l, set, is_pal); + } + } +} + +static void check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +{ + int f, l; + + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + fmt->service_lines[f][l] = select_service_from_set(f, l, fmt->service_lines[f][l], is_pal); + } + } +} + +u16 ivtv_get_service_set(struct v4l2_sliced_vbi_format *fmt) +{ + int f, l; + u16 set = 0; + + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + set |= fmt->service_lines[f][l]; + } + } + return set; +} + +void ivtv_set_osd_alpha(struct ivtv *itv) +{ + ivtv_vapi(itv, CX2341X_OSD_SET_GLOBAL_ALPHA, 3, + itv->osd_global_alpha_state, itv->osd_global_alpha, !itv->osd_local_alpha_state); + ivtv_vapi(itv, CX2341X_OSD_SET_CHROMA_KEY, 2, itv->osd_chroma_key_state, itv->osd_chroma_key); +} + +int ivtv_set_speed(struct ivtv *itv, int speed) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + int single_step = (speed == 1 || speed == -1); + DEFINE_WAIT(wait); + + if (speed == 0) speed = 1000; + + /* No change? */ + if (speed == itv->speed && !single_step) + return 0; + + if (single_step && (speed < 0) == (itv->speed < 0)) { + /* Single step video and no need to change direction */ + ivtv_vapi(itv, CX2341X_DEC_STEP_VIDEO, 1, 0); + itv->speed = speed; + return 0; + } + if (single_step) + /* Need to change direction */ + speed = speed < 0 ? -1000 : 1000; + + data[0] = (speed > 1000 || speed < -1000) ? 0x80000000 : 0; + data[0] |= (speed > 1000 || speed < -1500) ? 0x40000000 : 0; + data[1] = (speed < 0); + data[2] = speed < 0 ? 3 : 7; + data[3] = v4l2_ctrl_g_ctrl(itv->cxhdl.video_b_frames); + data[4] = (speed == 1500 || speed == 500) ? itv->speed_mute_audio : 0; + data[5] = 0; + data[6] = 0; + + if (speed == 1500 || speed == -1500) data[0] |= 1; + else if (speed == 2000 || speed == -2000) data[0] |= 2; + else if (speed > -1000 && speed < 0) data[0] |= (-1000 / speed); + else if (speed < 1000 && speed > 0) data[0] |= (1000 / speed); + + /* If not decoding, just change speed setting */ + if (atomic_read(&itv->decoding) > 0) { + int got_sig = 0; + + /* Stop all DMA and decoding activity */ + ivtv_vapi(itv, CX2341X_DEC_PAUSE_PLAYBACK, 1, 0); + + /* Wait for any DMA to finish */ + mutex_unlock(&itv->serialize_lock); + prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); + while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) { + got_sig = signal_pending(current); + if (got_sig) + break; + got_sig = 0; + schedule(); + } + finish_wait(&itv->dma_waitq, &wait); + mutex_lock(&itv->serialize_lock); + if (got_sig) + return -EINTR; + + /* Change Speed safely */ + ivtv_api(itv, CX2341X_DEC_SET_PLAYBACK_SPEED, 7, data); + IVTV_DEBUG_INFO("Setting Speed to 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", + data[0], data[1], data[2], data[3], data[4], data[5], data[6]); + } + if (single_step) { + speed = (speed < 0) ? -1 : 1; + ivtv_vapi(itv, CX2341X_DEC_STEP_VIDEO, 1, 0); + } + itv->speed = speed; + return 0; +} + +static int ivtv_validate_speed(int cur_speed, int new_speed) +{ + int fact = new_speed < 0 ? -1 : 1; + int s; + + if (cur_speed == 0) + cur_speed = 1000; + if (new_speed < 0) + new_speed = -new_speed; + if (cur_speed < 0) + cur_speed = -cur_speed; + + if (cur_speed <= new_speed) { + if (new_speed > 1500) + return fact * 2000; + if (new_speed > 1000) + return fact * 1500; + } + else { + if (new_speed >= 2000) + return fact * 2000; + if (new_speed >= 1500) + return fact * 1500; + if (new_speed >= 1000) + return fact * 1000; + } + if (new_speed == 0) + return 1000; + if (new_speed == 1 || new_speed == 1000) + return fact * new_speed; + + s = new_speed; + new_speed = 1000 / new_speed; + if (1000 / cur_speed == new_speed) + new_speed += (cur_speed < s) ? -1 : 1; + if (new_speed > 60) return 1000 / (fact * 60); + return 1000 / (fact * new_speed); +} + +static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, + struct v4l2_decoder_cmd *dc, int try) +{ + struct ivtv_stream *s = &itv->streams[IVTV_DEC_STREAM_TYPE_MPG]; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + + switch (dc->cmd) { + case V4L2_DEC_CMD_START: { + dc->flags &= V4L2_DEC_CMD_START_MUTE_AUDIO; + dc->start.speed = ivtv_validate_speed(itv->speed, dc->start.speed); + if (dc->start.speed < 0) + dc->start.format = V4L2_DEC_START_FMT_GOP; + else + dc->start.format = V4L2_DEC_START_FMT_NONE; + if (dc->start.speed != 500 && dc->start.speed != 1500) + dc->flags = dc->start.speed == 1000 ? 0 : + V4L2_DEC_CMD_START_MUTE_AUDIO; + if (try) break; + + itv->speed_mute_audio = dc->flags & V4L2_DEC_CMD_START_MUTE_AUDIO; + if (ivtv_set_output_mode(itv, OUT_MPG) != OUT_MPG) + return -EBUSY; + if (test_and_clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags)) { + /* forces ivtv_set_speed to be called */ + itv->speed = 0; + } + return ivtv_start_decoding(id, dc->start.speed); + } + + case V4L2_DEC_CMD_STOP: + dc->flags &= V4L2_DEC_CMD_STOP_IMMEDIATELY | V4L2_DEC_CMD_STOP_TO_BLACK; + if (dc->flags & V4L2_DEC_CMD_STOP_IMMEDIATELY) + dc->stop.pts = 0; + if (try) break; + if (atomic_read(&itv->decoding) == 0) + return 0; + if (itv->output_mode != OUT_MPG) + return -EBUSY; + + itv->output_mode = OUT_NONE; + return ivtv_stop_v4l2_decode_stream(s, dc->flags, dc->stop.pts); + + case V4L2_DEC_CMD_PAUSE: + dc->flags &= V4L2_DEC_CMD_PAUSE_TO_BLACK; + if (try) break; + if (!atomic_read(&itv->decoding)) + return -EPERM; + if (itv->output_mode != OUT_MPG) + return -EBUSY; + if (atomic_read(&itv->decoding) > 0) { + ivtv_vapi(itv, CX2341X_DEC_PAUSE_PLAYBACK, 1, + (dc->flags & V4L2_DEC_CMD_PAUSE_TO_BLACK) ? 1 : 0); + set_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags); + } + break; + + case V4L2_DEC_CMD_RESUME: + dc->flags = 0; + if (try) break; + if (!atomic_read(&itv->decoding)) + return -EPERM; + if (itv->output_mode != OUT_MPG) + return -EBUSY; + if (test_and_clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags)) { + int speed = itv->speed; + itv->speed = 0; + return ivtv_start_decoding(id, speed); + } + break; + + default: + return -EINVAL; + } + return 0; +} + +static int ivtv_g_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv *itv = fh2id(fh)->itv; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + if (!(itv->v4l2_cap & V4L2_CAP_SLICED_VBI_OUTPUT)) + return -EINVAL; + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + memset(vbifmt->service_lines, 0, sizeof(vbifmt->service_lines)); + if (itv->is_60hz) { + vbifmt->service_lines[0][21] = V4L2_SLICED_CAPTION_525; + vbifmt->service_lines[1][21] = V4L2_SLICED_CAPTION_525; + } else { + vbifmt->service_lines[0][23] = V4L2_SLICED_WSS_625; + vbifmt->service_lines[0][16] = V4L2_SLICED_VPS; + } + vbifmt->service_set = ivtv_get_service_set(vbifmt); + return 0; +} + +static int ivtv_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + pixfmt->width = itv->cxhdl.width; + pixfmt->height = itv->cxhdl.height; + pixfmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + pixfmt->field = V4L2_FIELD_INTERLACED; + pixfmt->priv = 0; + if (id->type == IVTV_ENC_STREAM_TYPE_YUV) { + pixfmt->pixelformat = V4L2_PIX_FMT_HM12; + /* YUV size is (Y=(h*720) + UV=(h*(720/2))) */ + pixfmt->sizeimage = pixfmt->height * 720 * 3 / 2; + pixfmt->bytesperline = 720; + } else { + pixfmt->pixelformat = V4L2_PIX_FMT_MPEG; + pixfmt->sizeimage = 128 * 1024; + pixfmt->bytesperline = 0; + } + return 0; +} + +static int ivtv_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv *itv = fh2id(fh)->itv; + struct v4l2_vbi_format *vbifmt = &fmt->fmt.vbi; + + vbifmt->sampling_rate = 27000000; + vbifmt->offset = 248; + vbifmt->samples_per_line = itv->vbi.raw_decoder_line_size - 4; + vbifmt->sample_format = V4L2_PIX_FMT_GREY; + vbifmt->start[0] = itv->vbi.start[0]; + vbifmt->start[1] = itv->vbi.start[1]; + vbifmt->count[0] = vbifmt->count[1] = itv->vbi.count; + vbifmt->flags = 0; + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + return 0; +} + +static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + + if (id->type == IVTV_DEC_STREAM_TYPE_VBI) { + vbifmt->service_set = itv->is_50hz ? V4L2_SLICED_VBI_625 : + V4L2_SLICED_VBI_525; + ivtv_expand_service_set(vbifmt, itv->is_50hz); + vbifmt->service_set = ivtv_get_service_set(vbifmt); + return 0; + } + + v4l2_subdev_call(itv->sd_video, vbi, g_sliced_fmt, vbifmt); + vbifmt->service_set = ivtv_get_service_set(vbifmt); + return 0; +} + +static int ivtv_g_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + pixfmt->width = itv->main_rect.width; + pixfmt->height = itv->main_rect.height; + pixfmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + pixfmt->field = V4L2_FIELD_INTERLACED; + pixfmt->priv = 0; + if (id->type == IVTV_DEC_STREAM_TYPE_YUV) { + switch (itv->yuv_info.lace_mode & IVTV_YUV_MODE_MASK) { + case IVTV_YUV_MODE_INTERLACED: + pixfmt->field = (itv->yuv_info.lace_mode & IVTV_YUV_SYNC_MASK) ? + V4L2_FIELD_INTERLACED_BT : V4L2_FIELD_INTERLACED_TB; + break; + case IVTV_YUV_MODE_PROGRESSIVE: + pixfmt->field = V4L2_FIELD_NONE; + break; + default: + pixfmt->field = V4L2_FIELD_ANY; + break; + } + pixfmt->pixelformat = V4L2_PIX_FMT_HM12; + pixfmt->bytesperline = 720; + pixfmt->width = itv->yuv_info.v4l2_src_w; + pixfmt->height = itv->yuv_info.v4l2_src_h; + /* YUV size is (Y=(h*w) + UV=(h*(w/2))) */ + pixfmt->sizeimage = + 1080 * ((pixfmt->height + 31) & ~31); + } else { + pixfmt->pixelformat = V4L2_PIX_FMT_MPEG; + pixfmt->sizeimage = 128 * 1024; + pixfmt->bytesperline = 0; + } + return 0; +} + +static int ivtv_g_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv *itv = fh2id(fh)->itv; + struct v4l2_window *winfmt = &fmt->fmt.win; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + winfmt->chromakey = itv->osd_chroma_key; + winfmt->global_alpha = itv->osd_global_alpha; + winfmt->field = V4L2_FIELD_INTERLACED; + winfmt->clips = NULL; + winfmt->clipcount = 0; + winfmt->bitmap = NULL; + winfmt->w.top = winfmt->w.left = 0; + winfmt->w.width = itv->osd_rect.width; + winfmt->w.height = itv->osd_rect.height; + return 0; +} + +static int ivtv_try_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt) +{ + return ivtv_g_fmt_sliced_vbi_out(file, fh, fmt); +} + +static int ivtv_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + int w = fmt->fmt.pix.width; + int h = fmt->fmt.pix.height; + int min_h = 2; + + w = min(w, 720); + w = max(w, 2); + if (id->type == IVTV_ENC_STREAM_TYPE_YUV) { + /* YUV height must be a multiple of 32 */ + h &= ~0x1f; + min_h = 32; + } + h = min(h, itv->is_50hz ? 576 : 480); + h = max(h, min_h); + ivtv_g_fmt_vid_cap(file, fh, fmt); + fmt->fmt.pix.width = w; + fmt->fmt.pix.height = h; + return 0; +} + +static int ivtv_try_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + return ivtv_g_fmt_vbi_cap(file, fh, fmt); +} + +static int ivtv_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + + if (id->type == IVTV_DEC_STREAM_TYPE_VBI) + return ivtv_g_fmt_sliced_vbi_cap(file, fh, fmt); + + /* set sliced VBI capture format */ + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + + if (vbifmt->service_set) + ivtv_expand_service_set(vbifmt, itv->is_50hz); + check_service_set(vbifmt, itv->is_50hz); + vbifmt->service_set = ivtv_get_service_set(vbifmt); + return 0; +} + +static int ivtv_try_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv_open_id *id = fh2id(fh); + s32 w = fmt->fmt.pix.width; + s32 h = fmt->fmt.pix.height; + int field = fmt->fmt.pix.field; + int ret = ivtv_g_fmt_vid_out(file, fh, fmt); + + w = min(w, 720); + w = max(w, 2); + /* Why can the height be 576 even when the output is NTSC? + + Internally the buffers of the PVR350 are always set to 720x576. The + decoded video frame will always be placed in the top left corner of + this buffer. For any video which is not 720x576, the buffer will + then be cropped to remove the unused right and lower areas, with + the remaining image being scaled by the hardware to fit the display + area. The video can be scaled both up and down, so a 720x480 video + can be displayed full-screen on PAL and a 720x576 video can be + displayed without cropping on NTSC. + + Note that the scaling only occurs on the video stream, the osd + resolution is locked to the broadcast standard and not scaled. + + Thanks to Ian Armstrong for this explanation. */ + h = min(h, 576); + h = max(h, 2); + if (id->type == IVTV_DEC_STREAM_TYPE_YUV) + fmt->fmt.pix.field = field; + fmt->fmt.pix.width = w; + fmt->fmt.pix.height = h; + return ret; +} + +static int ivtv_try_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv *itv = fh2id(fh)->itv; + u32 chromakey = fmt->fmt.win.chromakey; + u8 global_alpha = fmt->fmt.win.global_alpha; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + ivtv_g_fmt_vid_out_overlay(file, fh, fmt); + fmt->fmt.win.chromakey = chromakey; + fmt->fmt.win.global_alpha = global_alpha; + return 0; +} + +static int ivtv_s_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt) +{ + return ivtv_g_fmt_sliced_vbi_out(file, fh, fmt); +} + +static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct v4l2_mbus_framefmt mbus_fmt; + int ret = ivtv_try_fmt_vid_cap(file, fh, fmt); + int w = fmt->fmt.pix.width; + int h = fmt->fmt.pix.height; + + if (ret) + return ret; + + if (itv->cxhdl.width == w && itv->cxhdl.height == h) + return 0; + + if (atomic_read(&itv->capturing) > 0) + return -EBUSY; + + itv->cxhdl.width = w; + itv->cxhdl.height = h; + if (v4l2_ctrl_g_ctrl(itv->cxhdl.video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) + fmt->fmt.pix.width /= 2; + mbus_fmt.width = fmt->fmt.pix.width; + mbus_fmt.height = h; + mbus_fmt.code = V4L2_MBUS_FMT_FIXED; + v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &mbus_fmt); + return ivtv_g_fmt_vid_cap(file, fh, fmt); +} + +static int ivtv_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (!ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0) + return -EBUSY; + itv->vbi.sliced_in->service_set = 0; + itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; + v4l2_subdev_call(itv->sd_video, vbi, s_raw_fmt, &fmt->fmt.vbi); + return ivtv_g_fmt_vbi_cap(file, fh, fmt); +} + +static int ivtv_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + int ret = ivtv_try_fmt_sliced_vbi_cap(file, fh, fmt); + + if (ret || id->type == IVTV_DEC_STREAM_TYPE_VBI) + return ret; + + check_service_set(vbifmt, itv->is_50hz); + if (ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0) + return -EBUSY; + itv->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + v4l2_subdev_call(itv->sd_video, vbi, s_sliced_fmt, vbifmt); + memcpy(itv->vbi.sliced_in, vbifmt, sizeof(*itv->vbi.sliced_in)); + return 0; +} + +static int ivtv_s_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct yuv_playback_info *yi = &itv->yuv_info; + int ret = ivtv_try_fmt_vid_out(file, fh, fmt); + + if (ret) + return ret; + + if (id->type != IVTV_DEC_STREAM_TYPE_YUV) + return 0; + + /* Return now if we already have some frame data */ + if (yi->stream_size) + return -EBUSY; + + yi->v4l2_src_w = fmt->fmt.pix.width; + yi->v4l2_src_h = fmt->fmt.pix.height; + + switch (fmt->fmt.pix.field) { + case V4L2_FIELD_NONE: + yi->lace_mode = IVTV_YUV_MODE_PROGRESSIVE; + break; + case V4L2_FIELD_ANY: + yi->lace_mode = IVTV_YUV_MODE_AUTO; + break; + case V4L2_FIELD_INTERLACED_BT: + yi->lace_mode = + IVTV_YUV_MODE_INTERLACED|IVTV_YUV_SYNC_ODD; + break; + case V4L2_FIELD_INTERLACED_TB: + default: + yi->lace_mode = IVTV_YUV_MODE_INTERLACED; + break; + } + yi->lace_sync_field = (yi->lace_mode & IVTV_YUV_SYNC_MASK) == IVTV_YUV_SYNC_EVEN ? 0 : 1; + + if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) + itv->dma_data_req_size = + 1080 * ((yi->v4l2_src_h + 31) & ~31); + + return 0; +} + +static int ivtv_s_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ivtv *itv = fh2id(fh)->itv; + int ret = ivtv_try_fmt_vid_out_overlay(file, fh, fmt); + + if (ret == 0) { + itv->osd_chroma_key = fmt->fmt.win.chromakey; + itv->osd_global_alpha = fmt->fmt.win.global_alpha; + ivtv_set_osd_alpha(itv); + } + return ret; +} + +static int ivtv_g_chip_ident(struct file *file, void *fh, struct v4l2_dbg_chip_ident *chip) +{ + struct ivtv *itv = fh2id(fh)->itv; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type == V4L2_CHIP_MATCH_HOST) { + if (v4l2_chip_match_host(&chip->match)) + chip->ident = itv->has_cx23415 ? V4L2_IDENT_CX23415 : V4L2_IDENT_CX23416; + return 0; + } + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + /* TODO: is this correct? */ + return ivtv_call_all_err(itv, core, g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ivtv_itvc(struct ivtv *itv, bool get, u64 reg, u64 *val) +{ + volatile u8 __iomem *reg_start; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (reg >= IVTV_REG_OFFSET && reg < IVTV_REG_OFFSET + IVTV_REG_SIZE) + reg_start = itv->reg_mem - IVTV_REG_OFFSET; + else if (itv->has_cx23415 && reg >= IVTV_DECODER_OFFSET && + reg < IVTV_DECODER_OFFSET + IVTV_DECODER_SIZE) + reg_start = itv->dec_mem - IVTV_DECODER_OFFSET; + else if (reg < IVTV_ENCODER_SIZE) + reg_start = itv->enc_mem; + else + return -EINVAL; + + if (get) + *val = readl(reg + reg_start); + else + writel(*val, reg + reg_start); + return 0; +} + +static int ivtv_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (v4l2_chip_match_host(®->match)) { + reg->size = 4; + return ivtv_itvc(itv, true, reg->reg, ®->val); + } + /* TODO: subdev errors should not be ignored, this should become a + subdev helper function. */ + ivtv_call_all(itv, core, g_register, reg); + return 0; +} + +static int ivtv_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (v4l2_chip_match_host(®->match)) { + u64 val = reg->val; + + return ivtv_itvc(itv, false, reg->reg, &val); + } + /* TODO: subdev errors should not be ignored, this should become a + subdev helper function. */ + ivtv_call_all(itv, core, s_register, reg); + return 0; +} +#endif + +static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vcap) +{ + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; + + strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver)); + strlcpy(vcap->card, itv->card_name, sizeof(vcap->card)); + snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(itv->pdev)); + vcap->capabilities = itv->v4l2_cap | V4L2_CAP_DEVICE_CAPS; + vcap->device_caps = s->caps; + return 0; +} + +static int ivtv_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin) +{ + struct ivtv *itv = fh2id(fh)->itv; + + return ivtv_get_audio_input(itv, vin->index, vin); +} + +static int ivtv_g_audio(struct file *file, void *fh, struct v4l2_audio *vin) +{ + struct ivtv *itv = fh2id(fh)->itv; + + vin->index = itv->audio_input; + return ivtv_get_audio_input(itv, vin->index, vin); +} + +static int ivtv_s_audio(struct file *file, void *fh, const struct v4l2_audio *vout) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (vout->index >= itv->nof_audio_inputs) + return -EINVAL; + + itv->audio_input = vout->index; + ivtv_audio_set_io(itv); + + return 0; +} + +static int ivtv_enumaudout(struct file *file, void *fh, struct v4l2_audioout *vin) +{ + struct ivtv *itv = fh2id(fh)->itv; + + /* set it to defaults from our table */ + return ivtv_get_audio_output(itv, vin->index, vin); +} + +static int ivtv_g_audout(struct file *file, void *fh, struct v4l2_audioout *vin) +{ + struct ivtv *itv = fh2id(fh)->itv; + + vin->index = 0; + return ivtv_get_audio_output(itv, vin->index, vin); +} + +static int ivtv_s_audout(struct file *file, void *fh, const struct v4l2_audioout *vout) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (itv->card->video_outputs == NULL || vout->index != 0) + return -EINVAL; + return 0; +} + +static int ivtv_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + struct ivtv *itv = fh2id(fh)->itv; + + /* set it to defaults from our table */ + return ivtv_get_input(itv, vin->index, vin); +} + +static int ivtv_enum_output(struct file *file, void *fh, struct v4l2_output *vout) +{ + struct ivtv *itv = fh2id(fh)->itv; + + return ivtv_get_output(itv, vout->index, vout); +} + +static int ivtv_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropcap) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct yuv_playback_info *yi = &itv->yuv_info; + int streamtype; + + streamtype = id->type; + + if (cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) + return -EINVAL; + cropcap->bounds.top = cropcap->bounds.left = 0; + cropcap->bounds.width = 720; + if (cropcap->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + cropcap->bounds.height = itv->is_50hz ? 576 : 480; + cropcap->pixelaspect.numerator = itv->is_50hz ? 59 : 10; + cropcap->pixelaspect.denominator = itv->is_50hz ? 54 : 11; + } else if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) { + if (yi->track_osd) { + cropcap->bounds.width = yi->osd_full_w; + cropcap->bounds.height = yi->osd_full_h; + } else { + cropcap->bounds.width = 720; + cropcap->bounds.height = + itv->is_out_50hz ? 576 : 480; + } + cropcap->pixelaspect.numerator = itv->is_out_50hz ? 59 : 10; + cropcap->pixelaspect.denominator = itv->is_out_50hz ? 54 : 11; + } else { + cropcap->bounds.height = itv->is_out_50hz ? 576 : 480; + cropcap->pixelaspect.numerator = itv->is_out_50hz ? 59 : 10; + cropcap->pixelaspect.denominator = itv->is_out_50hz ? 54 : 11; + } + cropcap->defrect = cropcap->bounds; + return 0; +} + +static int ivtv_s_crop(struct file *file, void *fh, const struct v4l2_crop *crop) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct yuv_playback_info *yi = &itv->yuv_info; + int streamtype; + + streamtype = id->type; + + if (crop->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && + (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) { + if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) { + yi->main_rect = crop->c; + return 0; + } else { + if (!ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4, + crop->c.width, crop->c.height, crop->c.left, crop->c.top)) { + itv->main_rect = crop->c; + return 0; + } + } + return -EINVAL; + } + return -EINVAL; +} + +static int ivtv_g_crop(struct file *file, void *fh, struct v4l2_crop *crop) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct yuv_playback_info *yi = &itv->yuv_info; + int streamtype; + + streamtype = id->type; + + if (crop->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && + (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) { + if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) + crop->c = yi->main_rect; + else + crop->c = itv->main_rect; + return 0; + } + return -EINVAL; +} + +static int ivtv_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static const struct v4l2_fmtdesc hm12 = { + 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, 0, + "HM12 (YUV 4:2:0)", V4L2_PIX_FMT_HM12, + { 0, 0, 0, 0 } + }; + static const struct v4l2_fmtdesc mpeg = { + 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FMT_FLAG_COMPRESSED, + "MPEG", V4L2_PIX_FMT_MPEG, + { 0, 0, 0, 0 } + }; + struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; + + if (fmt->index) + return -EINVAL; + if (s->type == IVTV_ENC_STREAM_TYPE_MPG) + *fmt = mpeg; + else if (s->type == IVTV_ENC_STREAM_TYPE_YUV) + *fmt = hm12; + else + return -EINVAL; + return 0; +} + +static int ivtv_enum_fmt_vid_out(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static const struct v4l2_fmtdesc hm12 = { + 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, 0, + "HM12 (YUV 4:2:0)", V4L2_PIX_FMT_HM12, + { 0, 0, 0, 0 } + }; + static const struct v4l2_fmtdesc mpeg = { + 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, V4L2_FMT_FLAG_COMPRESSED, + "MPEG", V4L2_PIX_FMT_MPEG, + { 0, 0, 0, 0 } + }; + struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; + + if (fmt->index) + return -EINVAL; + if (s->type == IVTV_DEC_STREAM_TYPE_MPG) + *fmt = mpeg; + else if (s->type == IVTV_DEC_STREAM_TYPE_YUV) + *fmt = hm12; + else + return -EINVAL; + return 0; +} + +static int ivtv_g_input(struct file *file, void *fh, unsigned int *i) +{ + struct ivtv *itv = fh2id(fh)->itv; + + *i = itv->active_input; + + return 0; +} + +int ivtv_s_input(struct file *file, void *fh, unsigned int inp) +{ + struct ivtv *itv = fh2id(fh)->itv; + v4l2_std_id std; + int i; + + if (inp >= itv->nof_inputs) + return -EINVAL; + + if (inp == itv->active_input) { + IVTV_DEBUG_INFO("Input unchanged\n"); + return 0; + } + + if (atomic_read(&itv->capturing) > 0) { + return -EBUSY; + } + + IVTV_DEBUG_INFO("Changing input from %d to %d\n", + itv->active_input, inp); + + itv->active_input = inp; + /* Set the audio input to whatever is appropriate for the + input type. */ + itv->audio_input = itv->card->video_inputs[inp].audio_index; + + if (itv->card->video_inputs[inp].video_type == IVTV_CARD_INPUT_VID_TUNER) + std = itv->tuner_std; + else + std = V4L2_STD_ALL; + for (i = 0; i <= IVTV_ENC_STREAM_TYPE_VBI; i++) + itv->streams[i].vdev->tvnorms = std; + + /* prevent others from messing with the streams until + we're finished changing inputs. */ + ivtv_mute(itv); + ivtv_video_set_io(itv); + ivtv_audio_set_io(itv); + ivtv_unmute(itv); + + return 0; +} + +static int ivtv_g_output(struct file *file, void *fh, unsigned int *i) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + + *i = itv->active_output; + + return 0; +} + +static int ivtv_s_output(struct file *file, void *fh, unsigned int outp) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (outp >= itv->card->nof_outputs) + return -EINVAL; + + if (outp == itv->active_output) { + IVTV_DEBUG_INFO("Output unchanged\n"); + return 0; + } + IVTV_DEBUG_INFO("Changing output from %d to %d\n", + itv->active_output, outp); + + itv->active_output = outp; + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing, + SAA7127_INPUT_TYPE_NORMAL, + itv->card->video_outputs[outp].video_output, 0); + + return 0; +} + +static int ivtv_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) +{ + struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; + + if (s->vdev->vfl_dir) + return -ENOTTY; + if (vf->tuner != 0) + return -EINVAL; + + ivtv_call_all(itv, tuner, g_frequency, vf); + return 0; +} + +int ivtv_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf) +{ + struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; + + if (s->vdev->vfl_dir) + return -ENOTTY; + if (vf->tuner != 0) + return -EINVAL; + + ivtv_mute(itv); + IVTV_DEBUG_INFO("v4l2 ioctl: set frequency %d\n", vf->frequency); + ivtv_call_all(itv, tuner, s_frequency, vf); + ivtv_unmute(itv); + return 0; +} + +static int ivtv_g_std(struct file *file, void *fh, v4l2_std_id *std) +{ + struct ivtv *itv = fh2id(fh)->itv; + + *std = itv->std; + return 0; +} + +void ivtv_s_std_enc(struct ivtv *itv, v4l2_std_id std) +{ + itv->std = std; + itv->is_60hz = (std & V4L2_STD_525_60) ? 1 : 0; + itv->is_50hz = !itv->is_60hz; + cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz); + itv->cxhdl.width = 720; + itv->cxhdl.height = itv->is_50hz ? 576 : 480; + itv->vbi.count = itv->is_50hz ? 18 : 12; + itv->vbi.start[0] = itv->is_50hz ? 6 : 10; + itv->vbi.start[1] = itv->is_50hz ? 318 : 273; + + if (itv->hw_flags & IVTV_HW_CX25840) + itv->vbi.sliced_decoder_line_size = itv->is_60hz ? 272 : 284; + + /* Tuner */ + ivtv_call_all(itv, core, s_std, itv->std); +} + +void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id std) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + DEFINE_WAIT(wait); + int f; + + /* set display standard */ + itv->std_out = std; + itv->is_out_60hz = (std & V4L2_STD_525_60) ? 1 : 0; + itv->is_out_50hz = !itv->is_out_60hz; + ivtv_call_all(itv, video, s_std_output, itv->std_out); + + /* + * The next firmware call is time sensitive. Time it to + * avoid risk of a hard lock, by trying to ensure the call + * happens within the first 100 lines of the top field. + * Make 4 attempts to sync to the decoder before giving up. + */ + mutex_unlock(&itv->serialize_lock); + for (f = 0; f < 4; f++) { + prepare_to_wait(&itv->vsync_waitq, &wait, + TASK_UNINTERRUPTIBLE); + if ((read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16) < 100) + break; + schedule_timeout(msecs_to_jiffies(25)); + } + finish_wait(&itv->vsync_waitq, &wait); + mutex_lock(&itv->serialize_lock); + + if (f == 4) + IVTV_WARN("Mode change failed to sync to decoder\n"); + + ivtv_vapi(itv, CX2341X_DEC_SET_STANDARD, 1, itv->is_out_50hz); + itv->main_rect.left = 0; + itv->main_rect.top = 0; + itv->main_rect.width = 720; + itv->main_rect.height = itv->is_out_50hz ? 576 : 480; + ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4, + 720, itv->main_rect.height, 0, 0); + yi->main_rect = itv->main_rect; + if (!itv->osd_info) { + yi->osd_full_w = 720; + yi->osd_full_h = itv->is_out_50hz ? 576 : 480; + } +} + +static int ivtv_s_std(struct file *file, void *fh, v4l2_std_id std) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if ((std & V4L2_STD_ALL) == 0) + return -EINVAL; + + if (std == itv->std) + return 0; + + if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) || + atomic_read(&itv->capturing) > 0 || + atomic_read(&itv->decoding) > 0) { + /* Switching standard would mess with already running + streams, prevent that by returning EBUSY. */ + return -EBUSY; + } + + IVTV_DEBUG_INFO("Switching standard to %llx.\n", + (unsigned long long)itv->std); + + ivtv_s_std_enc(itv, std); + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) + ivtv_s_std_dec(itv, std); + + return 0; +} + +static int ivtv_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + + if (vt->index != 0) + return -EINVAL; + + ivtv_call_all(itv, tuner, s_tuner, vt); + + return 0; +} + +static int ivtv_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (vt->index != 0) + return -EINVAL; + + ivtv_call_all(itv, tuner, g_tuner, vt); + + if (vt->type == V4L2_TUNER_RADIO) + strlcpy(vt->name, "ivtv Radio Tuner", sizeof(vt->name)); + else + strlcpy(vt->name, "ivtv TV Tuner", sizeof(vt->name)); + return 0; +} + +static int ivtv_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap) +{ + struct ivtv *itv = fh2id(fh)->itv; + int set = itv->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; + int f, l; + + if (cap->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + if (valid_service_line(f, l, itv->is_50hz)) + cap->service_lines[f][l] = set; + } + } + } else if (cap->type == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) { + if (!(itv->v4l2_cap & V4L2_CAP_SLICED_VBI_OUTPUT)) + return -EINVAL; + if (itv->is_60hz) { + cap->service_lines[0][21] = V4L2_SLICED_CAPTION_525; + cap->service_lines[1][21] = V4L2_SLICED_CAPTION_525; + } else { + cap->service_lines[0][23] = V4L2_SLICED_WSS_625; + cap->service_lines[0][16] = V4L2_SLICED_VPS; + } + } else { + return -EINVAL; + } + + set = 0; + for (f = 0; f < 2; f++) + for (l = 0; l < 24; l++) + set |= cap->service_lines[f][l]; + cap->service_set = set; + return 0; +} + +static int ivtv_g_enc_index(struct file *file, void *fh, struct v4l2_enc_idx *idx) +{ + struct ivtv *itv = fh2id(fh)->itv; + struct v4l2_enc_idx_entry *e = idx->entry; + int entries; + int i; + + entries = (itv->pgm_info_write_idx + IVTV_MAX_PGM_INDEX - itv->pgm_info_read_idx) % + IVTV_MAX_PGM_INDEX; + if (entries > V4L2_ENC_IDX_ENTRIES) + entries = V4L2_ENC_IDX_ENTRIES; + idx->entries = 0; + idx->entries_cap = IVTV_MAX_PGM_INDEX; + if (!atomic_read(&itv->capturing)) + return 0; + for (i = 0; i < entries; i++) { + *e = itv->pgm_info[(itv->pgm_info_read_idx + i) % IVTV_MAX_PGM_INDEX]; + if ((e->flags & V4L2_ENC_IDX_FRAME_MASK) <= V4L2_ENC_IDX_FRAME_B) { + idx->entries++; + e++; + } + } + itv->pgm_info_read_idx = (itv->pgm_info_read_idx + idx->entries) % IVTV_MAX_PGM_INDEX; + return 0; +} + +static int ivtv_encoder_cmd(struct file *file, void *fh, struct v4l2_encoder_cmd *enc) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + + + switch (enc->cmd) { + case V4L2_ENC_CMD_START: + IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_START\n"); + enc->flags = 0; + return ivtv_start_capture(id); + + case V4L2_ENC_CMD_STOP: + IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_STOP\n"); + enc->flags &= V4L2_ENC_CMD_STOP_AT_GOP_END; + ivtv_stop_capture(id, enc->flags & V4L2_ENC_CMD_STOP_AT_GOP_END); + return 0; + + case V4L2_ENC_CMD_PAUSE: + IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_PAUSE\n"); + enc->flags = 0; + + if (!atomic_read(&itv->capturing)) + return -EPERM; + if (test_and_set_bit(IVTV_F_I_ENC_PAUSED, &itv->i_flags)) + return 0; + + ivtv_mute(itv); + ivtv_vapi(itv, CX2341X_ENC_PAUSE_ENCODER, 1, 0); + break; + + case V4L2_ENC_CMD_RESUME: + IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_RESUME\n"); + enc->flags = 0; + + if (!atomic_read(&itv->capturing)) + return -EPERM; + + if (!test_and_clear_bit(IVTV_F_I_ENC_PAUSED, &itv->i_flags)) + return 0; + + ivtv_vapi(itv, CX2341X_ENC_PAUSE_ENCODER, 1, 1); + ivtv_unmute(itv); + break; + default: + IVTV_DEBUG_IOCTL("Unknown cmd %d\n", enc->cmd); + return -EINVAL; + } + + return 0; +} + +static int ivtv_try_encoder_cmd(struct file *file, void *fh, struct v4l2_encoder_cmd *enc) +{ + struct ivtv *itv = fh2id(fh)->itv; + + switch (enc->cmd) { + case V4L2_ENC_CMD_START: + IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_START\n"); + enc->flags = 0; + return 0; + + case V4L2_ENC_CMD_STOP: + IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_STOP\n"); + enc->flags &= V4L2_ENC_CMD_STOP_AT_GOP_END; + return 0; + + case V4L2_ENC_CMD_PAUSE: + IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_PAUSE\n"); + enc->flags = 0; + return 0; + + case V4L2_ENC_CMD_RESUME: + IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_RESUME\n"); + enc->flags = 0; + return 0; + default: + IVTV_DEBUG_IOCTL("Unknown cmd %d\n", enc->cmd); + return -EINVAL; + } +} + +static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) +{ + struct ivtv *itv = fh2id(fh)->itv; + u32 data[CX2341X_MBOX_MAX_DATA]; + struct yuv_playback_info *yi = &itv->yuv_info; + + int pixfmt; + static u32 pixel_format[16] = { + V4L2_PIX_FMT_PAL8, /* Uses a 256-entry RGB colormap */ + V4L2_PIX_FMT_RGB565, + V4L2_PIX_FMT_RGB555, + V4L2_PIX_FMT_RGB444, + V4L2_PIX_FMT_RGB32, + 0, + 0, + 0, + V4L2_PIX_FMT_PAL8, /* Uses a 256-entry YUV colormap */ + V4L2_PIX_FMT_YUV565, + V4L2_PIX_FMT_YUV555, + V4L2_PIX_FMT_YUV444, + V4L2_PIX_FMT_YUV32, + 0, + 0, + 0, + }; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) + return -EINVAL; + if (!itv->osd_video_pbase) + return -EINVAL; + + fb->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | V4L2_FBUF_CAP_CHROMAKEY | + V4L2_FBUF_CAP_GLOBAL_ALPHA; + + ivtv_vapi_result(itv, data, CX2341X_OSD_GET_STATE, 0); + data[0] |= (read_reg(0x2a00) >> 7) & 0x40; + pixfmt = (data[0] >> 3) & 0xf; + + fb->fmt.pixelformat = pixel_format[pixfmt]; + fb->fmt.width = itv->osd_rect.width; + fb->fmt.height = itv->osd_rect.height; + fb->fmt.field = V4L2_FIELD_INTERLACED; + fb->fmt.bytesperline = fb->fmt.width; + fb->fmt.colorspace = V4L2_COLORSPACE_SMPTE170M; + fb->fmt.field = V4L2_FIELD_INTERLACED; + fb->fmt.priv = 0; + if (fb->fmt.pixelformat != V4L2_PIX_FMT_PAL8) + fb->fmt.bytesperline *= 2; + if (fb->fmt.pixelformat == V4L2_PIX_FMT_RGB32 || + fb->fmt.pixelformat == V4L2_PIX_FMT_YUV32) + fb->fmt.bytesperline *= 2; + fb->fmt.sizeimage = fb->fmt.bytesperline * fb->fmt.height; + fb->base = (void *)itv->osd_video_pbase; + fb->flags = 0; + + if (itv->osd_chroma_key_state) + fb->flags |= V4L2_FBUF_FLAG_CHROMAKEY; + + if (itv->osd_global_alpha_state) + fb->flags |= V4L2_FBUF_FLAG_GLOBAL_ALPHA; + + if (yi->track_osd) + fb->flags |= V4L2_FBUF_FLAG_OVERLAY; + + pixfmt &= 7; + + /* no local alpha for RGB565 or unknown formats */ + if (pixfmt == 1 || pixfmt > 4) + return 0; + + /* 16-bit formats have inverted local alpha */ + if (pixfmt == 2 || pixfmt == 3) + fb->capability |= V4L2_FBUF_CAP_LOCAL_INV_ALPHA; + else + fb->capability |= V4L2_FBUF_CAP_LOCAL_ALPHA; + + if (itv->osd_local_alpha_state) { + /* 16-bit formats have inverted local alpha */ + if (pixfmt == 2 || pixfmt == 3) + fb->flags |= V4L2_FBUF_FLAG_LOCAL_INV_ALPHA; + else + fb->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA; + } + + return 0; +} + +static int ivtv_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + struct yuv_playback_info *yi = &itv->yuv_info; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) + return -EINVAL; + if (!itv->osd_video_pbase) + return -EINVAL; + + itv->osd_global_alpha_state = (fb->flags & V4L2_FBUF_FLAG_GLOBAL_ALPHA) != 0; + itv->osd_local_alpha_state = + (fb->flags & (V4L2_FBUF_FLAG_LOCAL_ALPHA|V4L2_FBUF_FLAG_LOCAL_INV_ALPHA)) != 0; + itv->osd_chroma_key_state = (fb->flags & V4L2_FBUF_FLAG_CHROMAKEY) != 0; + ivtv_set_osd_alpha(itv); + yi->track_osd = (fb->flags & V4L2_FBUF_FLAG_OVERLAY) != 0; + return 0; +} + +static int ivtv_overlay(struct file *file, void *fh, unsigned int on) +{ + struct ivtv_open_id *id = fh2id(fh); + struct ivtv *itv = id->itv; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) + return -EINVAL; + + ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, on != 0); + + return 0; +} + +static int ivtv_subscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_VSYNC: + case V4L2_EVENT_EOS: + return v4l2_event_subscribe(fh, sub, 0, NULL); + case V4L2_EVENT_CTRL: + return v4l2_event_subscribe(fh, sub, 0, &v4l2_ctrl_sub_ev_ops); + default: + return -EINVAL; + } +} + +static int ivtv_log_status(struct file *file, void *fh) +{ + struct ivtv *itv = fh2id(fh)->itv; + u32 data[CX2341X_MBOX_MAX_DATA]; + + int has_output = itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT; + struct v4l2_input vidin; + struct v4l2_audio audin; + int i; + + IVTV_INFO("Version: %s Card: %s\n", IVTV_VERSION, itv->card_name); + if (itv->hw_flags & IVTV_HW_TVEEPROM) { + struct tveeprom tv; + + ivtv_read_eeprom(itv, &tv); + } + ivtv_call_all(itv, core, log_status); + ivtv_get_input(itv, itv->active_input, &vidin); + ivtv_get_audio_input(itv, itv->audio_input, &audin); + IVTV_INFO("Video Input: %s\n", vidin.name); + IVTV_INFO("Audio Input: %s%s\n", audin.name, + (itv->dualwatch_stereo_mode & ~0x300) == 0x200 ? " (Bilingual)" : ""); + if (has_output) { + struct v4l2_output vidout; + struct v4l2_audioout audout; + int mode = itv->output_mode; + static const char * const output_modes[5] = { + "None", + "MPEG Streaming", + "YUV Streaming", + "YUV Frames", + "Passthrough", + }; + static const char * const alpha_mode[4] = { + "None", + "Global", + "Local", + "Global and Local" + }; + static const char * const pixel_format[16] = { + "ARGB Indexed", + "RGB 5:6:5", + "ARGB 1:5:5:5", + "ARGB 1:4:4:4", + "ARGB 8:8:8:8", + "5", + "6", + "7", + "AYUV Indexed", + "YUV 5:6:5", + "AYUV 1:5:5:5", + "AYUV 1:4:4:4", + "AYUV 8:8:8:8", + "13", + "14", + "15", + }; + + ivtv_get_output(itv, itv->active_output, &vidout); + ivtv_get_audio_output(itv, 0, &audout); + IVTV_INFO("Video Output: %s\n", vidout.name); + if (mode < 0 || mode > OUT_PASSTHROUGH) + mode = OUT_NONE; + IVTV_INFO("Output Mode: %s\n", output_modes[mode]); + ivtv_vapi_result(itv, data, CX2341X_OSD_GET_STATE, 0); + data[0] |= (read_reg(0x2a00) >> 7) & 0x40; + IVTV_INFO("Overlay: %s, Alpha: %s, Pixel Format: %s\n", + data[0] & 1 ? "On" : "Off", + alpha_mode[(data[0] >> 1) & 0x3], + pixel_format[(data[0] >> 3) & 0xf]); + } + IVTV_INFO("Tuner: %s\n", + test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ? "Radio" : "TV"); + v4l2_ctrl_handler_log_status(&itv->cxhdl.hdl, itv->v4l2_dev.name); + IVTV_INFO("Status flags: 0x%08lx\n", itv->i_flags); + for (i = 0; i < IVTV_MAX_STREAMS; i++) { + struct ivtv_stream *s = &itv->streams[i]; + + if (s->vdev == NULL || s->buffers == 0) + continue; + IVTV_INFO("Stream %s: status 0x%04lx, %d%% of %d KiB (%d buffers) in use\n", s->name, s->s_flags, + (s->buffers - s->q_free.buffers) * 100 / s->buffers, + (s->buffers * s->buf_size) / 1024, s->buffers); + } + + IVTV_INFO("Read MPG/VBI: %lld/%lld bytes\n", + (long long)itv->mpg_data_received, + (long long)itv->vbi_data_inserted); + return 0; +} + +static int ivtv_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *dec) +{ + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + + IVTV_DEBUG_IOCTL("VIDIOC_DECODER_CMD %d\n", dec->cmd); + return ivtv_video_command(itv, id, dec, false); +} + +static int ivtv_try_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *dec) +{ + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + + IVTV_DEBUG_IOCTL("VIDIOC_TRY_DECODER_CMD %d\n", dec->cmd); + return ivtv_video_command(itv, id, dec, true); +} + +static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) +{ + struct ivtv_open_id *id = fh2id(filp->private_data); + struct ivtv *itv = id->itv; + int nonblocking = filp->f_flags & O_NONBLOCK; + struct ivtv_stream *s = &itv->streams[id->type]; + unsigned long iarg = (unsigned long)arg; + + switch (cmd) { + case IVTV_IOC_DMA_FRAME: { + struct ivtv_dma_frame *args = arg; + + IVTV_DEBUG_IOCTL("IVTV_IOC_DMA_FRAME\n"); + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + if (args->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) + return -EINVAL; + if (itv->output_mode == OUT_UDMA_YUV && args->y_source == NULL) + return 0; + if (ivtv_start_decoding(id, id->type)) { + return -EBUSY; + } + if (ivtv_set_output_mode(itv, OUT_UDMA_YUV) != OUT_UDMA_YUV) { + ivtv_release_stream(s); + return -EBUSY; + } + /* Mark that this file handle started the UDMA_YUV mode */ + id->yuv_frames = 1; + if (args->y_source == NULL) + return 0; + return ivtv_yuv_prep_frame(itv, args); + } + + case IVTV_IOC_PASSTHROUGH_MODE: + IVTV_DEBUG_IOCTL("IVTV_IOC_PASSTHROUGH_MODE\n"); + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + return ivtv_passthrough_mode(itv, *(int *)arg != 0); + + case VIDEO_GET_PTS: { + s64 *pts = arg; + s64 frame; + + IVTV_DEBUG_IOCTL("VIDEO_GET_PTS\n"); + if (s->type < IVTV_DEC_STREAM_TYPE_MPG) { + *pts = s->dma_pts; + break; + } + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + return ivtv_g_pts_frame(itv, pts, &frame); + } + + case VIDEO_GET_FRAME_COUNT: { + s64 *frame = arg; + s64 pts; + + IVTV_DEBUG_IOCTL("VIDEO_GET_FRAME_COUNT\n"); + if (s->type < IVTV_DEC_STREAM_TYPE_MPG) { + *frame = 0; + break; + } + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + return ivtv_g_pts_frame(itv, &pts, frame); + } + + case VIDEO_PLAY: { + struct v4l2_decoder_cmd dc; + + IVTV_DEBUG_IOCTL("VIDEO_PLAY\n"); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_START; + return ivtv_video_command(itv, id, &dc, 0); + } + + case VIDEO_STOP: { + struct v4l2_decoder_cmd dc; + + IVTV_DEBUG_IOCTL("VIDEO_STOP\n"); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_STOP; + dc.flags = V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY; + return ivtv_video_command(itv, id, &dc, 0); + } + + case VIDEO_FREEZE: { + struct v4l2_decoder_cmd dc; + + IVTV_DEBUG_IOCTL("VIDEO_FREEZE\n"); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_PAUSE; + return ivtv_video_command(itv, id, &dc, 0); + } + + case VIDEO_CONTINUE: { + struct v4l2_decoder_cmd dc; + + IVTV_DEBUG_IOCTL("VIDEO_CONTINUE\n"); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_RESUME; + return ivtv_video_command(itv, id, &dc, 0); + } + + case VIDEO_COMMAND: + case VIDEO_TRY_COMMAND: { + /* Note: struct v4l2_decoder_cmd has the same layout as + struct video_command */ + struct v4l2_decoder_cmd *dc = arg; + int try = (cmd == VIDEO_TRY_COMMAND); + + if (try) + IVTV_DEBUG_IOCTL("VIDEO_TRY_COMMAND %d\n", dc->cmd); + else + IVTV_DEBUG_IOCTL("VIDEO_COMMAND %d\n", dc->cmd); + return ivtv_video_command(itv, id, dc, try); + } + + case VIDEO_GET_EVENT: { + struct video_event *ev = arg; + DEFINE_WAIT(wait); + + IVTV_DEBUG_IOCTL("VIDEO_GET_EVENT\n"); + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + memset(ev, 0, sizeof(*ev)); + set_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags); + + while (1) { + if (test_and_clear_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags)) + ev->type = VIDEO_EVENT_DECODER_STOPPED; + else if (test_and_clear_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags)) { + ev->type = VIDEO_EVENT_VSYNC; + ev->u.vsync_field = test_bit(IVTV_F_I_EV_VSYNC_FIELD, &itv->i_flags) ? + VIDEO_VSYNC_FIELD_ODD : VIDEO_VSYNC_FIELD_EVEN; + if (itv->output_mode == OUT_UDMA_YUV && + (itv->yuv_info.lace_mode & IVTV_YUV_MODE_MASK) == + IVTV_YUV_MODE_PROGRESSIVE) { + ev->u.vsync_field = VIDEO_VSYNC_FIELD_PROGRESSIVE; + } + } + if (ev->type) + return 0; + if (nonblocking) + return -EAGAIN; + /* Wait for event. Note that serialize_lock is locked, + so to allow other processes to access the driver while + we are waiting unlock first and later lock again. */ + mutex_unlock(&itv->serialize_lock); + prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE); + if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) && + !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags)) + schedule(); + finish_wait(&itv->event_waitq, &wait); + mutex_lock(&itv->serialize_lock); + if (signal_pending(current)) { + /* return if a signal was received */ + IVTV_DEBUG_INFO("User stopped wait for event\n"); + return -EINTR; + } + } + break; + } + + case VIDEO_SELECT_SOURCE: + IVTV_DEBUG_IOCTL("VIDEO_SELECT_SOURCE\n"); + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + return ivtv_passthrough_mode(itv, iarg == VIDEO_SOURCE_DEMUX); + + case AUDIO_SET_MUTE: + IVTV_DEBUG_IOCTL("AUDIO_SET_MUTE\n"); + itv->speed_mute_audio = iarg; + return 0; + + case AUDIO_CHANNEL_SELECT: + IVTV_DEBUG_IOCTL("AUDIO_CHANNEL_SELECT\n"); + if (iarg > AUDIO_STEREO_SWAPPED) + return -EINVAL; + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg + 1); + + case AUDIO_BILINGUAL_CHANNEL_SELECT: + IVTV_DEBUG_IOCTL("AUDIO_BILINGUAL_CHANNEL_SELECT\n"); + if (iarg > AUDIO_STEREO_SWAPPED) + return -EINVAL; + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg + 1); + + default: + return -EINVAL; + } + return 0; +} + +static long ivtv_default(struct file *file, void *fh, bool valid_prio, + unsigned int cmd, void *arg) +{ + struct ivtv *itv = fh2id(fh)->itv; + + if (!valid_prio) { + switch (cmd) { + case IVTV_IOC_PASSTHROUGH_MODE: + case VIDEO_PLAY: + case VIDEO_STOP: + case VIDEO_FREEZE: + case VIDEO_CONTINUE: + case VIDEO_COMMAND: + case VIDEO_SELECT_SOURCE: + case AUDIO_SET_MUTE: + case AUDIO_CHANNEL_SELECT: + case AUDIO_BILINGUAL_CHANNEL_SELECT: + return -EBUSY; + } + } + + switch (cmd) { + case VIDIOC_INT_RESET: { + u32 val = *(u32 *)arg; + + if ((val == 0 && itv->options.newi2c) || (val & 0x01)) + ivtv_reset_ir_gpio(itv); + if (val & 0x02) + v4l2_subdev_call(itv->sd_video, core, reset, 0); + break; + } + + case IVTV_IOC_DMA_FRAME: + case IVTV_IOC_PASSTHROUGH_MODE: + case VIDEO_GET_PTS: + case VIDEO_GET_FRAME_COUNT: + case VIDEO_GET_EVENT: + case VIDEO_PLAY: + case VIDEO_STOP: + case VIDEO_FREEZE: + case VIDEO_CONTINUE: + case VIDEO_COMMAND: + case VIDEO_TRY_COMMAND: + case VIDEO_SELECT_SOURCE: + case AUDIO_SET_MUTE: + case AUDIO_CHANNEL_SELECT: + case AUDIO_BILINGUAL_CHANNEL_SELECT: + return ivtv_decoder_ioctls(file, cmd, (void *)arg); + + default: + return -ENOTTY; + } + return 0; +} + +static const struct v4l2_ioctl_ops ivtv_ioctl_ops = { + .vidioc_querycap = ivtv_querycap, + .vidioc_s_audio = ivtv_s_audio, + .vidioc_g_audio = ivtv_g_audio, + .vidioc_enumaudio = ivtv_enumaudio, + .vidioc_s_audout = ivtv_s_audout, + .vidioc_g_audout = ivtv_g_audout, + .vidioc_enum_input = ivtv_enum_input, + .vidioc_enum_output = ivtv_enum_output, + .vidioc_enumaudout = ivtv_enumaudout, + .vidioc_cropcap = ivtv_cropcap, + .vidioc_s_crop = ivtv_s_crop, + .vidioc_g_crop = ivtv_g_crop, + .vidioc_g_input = ivtv_g_input, + .vidioc_s_input = ivtv_s_input, + .vidioc_g_output = ivtv_g_output, + .vidioc_s_output = ivtv_s_output, + .vidioc_g_frequency = ivtv_g_frequency, + .vidioc_s_frequency = ivtv_s_frequency, + .vidioc_s_tuner = ivtv_s_tuner, + .vidioc_g_tuner = ivtv_g_tuner, + .vidioc_g_enc_index = ivtv_g_enc_index, + .vidioc_g_fbuf = ivtv_g_fbuf, + .vidioc_s_fbuf = ivtv_s_fbuf, + .vidioc_g_std = ivtv_g_std, + .vidioc_s_std = ivtv_s_std, + .vidioc_overlay = ivtv_overlay, + .vidioc_log_status = ivtv_log_status, + .vidioc_enum_fmt_vid_cap = ivtv_enum_fmt_vid_cap, + .vidioc_encoder_cmd = ivtv_encoder_cmd, + .vidioc_try_encoder_cmd = ivtv_try_encoder_cmd, + .vidioc_decoder_cmd = ivtv_decoder_cmd, + .vidioc_try_decoder_cmd = ivtv_try_decoder_cmd, + .vidioc_enum_fmt_vid_out = ivtv_enum_fmt_vid_out, + .vidioc_g_fmt_vid_cap = ivtv_g_fmt_vid_cap, + .vidioc_g_fmt_vbi_cap = ivtv_g_fmt_vbi_cap, + .vidioc_g_fmt_sliced_vbi_cap = ivtv_g_fmt_sliced_vbi_cap, + .vidioc_g_fmt_vid_out = ivtv_g_fmt_vid_out, + .vidioc_g_fmt_vid_out_overlay = ivtv_g_fmt_vid_out_overlay, + .vidioc_g_fmt_sliced_vbi_out = ivtv_g_fmt_sliced_vbi_out, + .vidioc_s_fmt_vid_cap = ivtv_s_fmt_vid_cap, + .vidioc_s_fmt_vbi_cap = ivtv_s_fmt_vbi_cap, + .vidioc_s_fmt_sliced_vbi_cap = ivtv_s_fmt_sliced_vbi_cap, + .vidioc_s_fmt_vid_out = ivtv_s_fmt_vid_out, + .vidioc_s_fmt_vid_out_overlay = ivtv_s_fmt_vid_out_overlay, + .vidioc_s_fmt_sliced_vbi_out = ivtv_s_fmt_sliced_vbi_out, + .vidioc_try_fmt_vid_cap = ivtv_try_fmt_vid_cap, + .vidioc_try_fmt_vbi_cap = ivtv_try_fmt_vbi_cap, + .vidioc_try_fmt_sliced_vbi_cap = ivtv_try_fmt_sliced_vbi_cap, + .vidioc_try_fmt_vid_out = ivtv_try_fmt_vid_out, + .vidioc_try_fmt_vid_out_overlay = ivtv_try_fmt_vid_out_overlay, + .vidioc_try_fmt_sliced_vbi_out = ivtv_try_fmt_sliced_vbi_out, + .vidioc_g_sliced_vbi_cap = ivtv_g_sliced_vbi_cap, + .vidioc_g_chip_ident = ivtv_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = ivtv_g_register, + .vidioc_s_register = ivtv_s_register, +#endif + .vidioc_default = ivtv_default, + .vidioc_subscribe_event = ivtv_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +void ivtv_set_funcs(struct video_device *vdev) +{ + vdev->ioctl_ops = &ivtv_ioctl_ops; +} diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.h b/drivers/media/pci/ivtv/ivtv-ioctl.h new file mode 100644 index 00000000..75c39775 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-ioctl.h @@ -0,0 +1,35 @@ +/* + ioctl system call + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_IOCTL_H +#define IVTV_IOCTL_H + +u16 ivtv_service2vbi(int type); +void ivtv_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal); +u16 ivtv_get_service_set(struct v4l2_sliced_vbi_format *fmt); +void ivtv_set_osd_alpha(struct ivtv *itv); +int ivtv_set_speed(struct ivtv *itv, int speed); +void ivtv_set_funcs(struct video_device *vdev); +void ivtv_s_std_enc(struct ivtv *itv, v4l2_std_id std); +void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id std); +int ivtv_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf); +int ivtv_s_input(struct file *file, void *fh, unsigned int inp); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-irq.c b/drivers/media/pci/ivtv/ivtv-irq.c new file mode 100644 index 00000000..19a7c9b9 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-irq.c @@ -0,0 +1,1088 @@ +/* interrupt handling + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-queue.h" +#include "ivtv-udma.h" +#include "ivtv-irq.h" +#include "ivtv-mailbox.h" +#include "ivtv-vbi.h" +#include "ivtv-yuv.h" +#include + +#define DMA_MAGIC_COOKIE 0x000001fe + +static void ivtv_dma_dec_start(struct ivtv_stream *s); + +static const int ivtv_stream_map[] = { + IVTV_ENC_STREAM_TYPE_MPG, + IVTV_ENC_STREAM_TYPE_YUV, + IVTV_ENC_STREAM_TYPE_PCM, + IVTV_ENC_STREAM_TYPE_VBI, +}; + +static void ivtv_pcm_work_handler(struct ivtv *itv) +{ + struct ivtv_stream *s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; + struct ivtv_buffer *buf; + + /* Pass the PCM data to ivtv-alsa */ + + while (1) { + /* + * Users should not be using both the ALSA and V4L2 PCM audio + * capture interfaces at the same time. If the user is doing + * this, there maybe a buffer in q_io to grab, use, and put + * back in rotation. + */ + buf = ivtv_dequeue(s, &s->q_io); + if (buf == NULL) + buf = ivtv_dequeue(s, &s->q_full); + if (buf == NULL) + break; + + if (buf->readpos < buf->bytesused) + itv->pcm_announce_callback(itv->alsa, + (u8 *)(buf->buf + buf->readpos), + (size_t)(buf->bytesused - buf->readpos)); + + ivtv_enqueue(s, buf, &s->q_free); + } +} + +static void ivtv_pio_work_handler(struct ivtv *itv) +{ + struct ivtv_stream *s = &itv->streams[itv->cur_pio_stream]; + struct ivtv_buffer *buf; + int i = 0; + + IVTV_DEBUG_HI_DMA("ivtv_pio_work_handler\n"); + if (itv->cur_pio_stream < 0 || itv->cur_pio_stream >= IVTV_MAX_STREAMS || + s->vdev == NULL || !ivtv_use_pio(s)) { + itv->cur_pio_stream = -1; + /* trigger PIO complete user interrupt */ + write_reg(IVTV_IRQ_ENC_PIO_COMPLETE, 0x44); + return; + } + IVTV_DEBUG_HI_DMA("Process PIO %s\n", s->name); + list_for_each_entry(buf, &s->q_dma.list, list) { + u32 size = s->sg_processing[i].size & 0x3ffff; + + /* Copy the data from the card to the buffer */ + if (s->type == IVTV_DEC_STREAM_TYPE_VBI) { + memcpy_fromio(buf->buf, itv->dec_mem + s->sg_processing[i].src - IVTV_DECODER_OFFSET, size); + } + else { + memcpy_fromio(buf->buf, itv->enc_mem + s->sg_processing[i].src, size); + } + i++; + if (i == s->sg_processing_size) + break; + } + write_reg(IVTV_IRQ_ENC_PIO_COMPLETE, 0x44); +} + +void ivtv_irq_work_handler(struct kthread_work *work) +{ + struct ivtv *itv = container_of(work, struct ivtv, irq_work); + + if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags)) + ivtv_pio_work_handler(itv); + + if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_VBI, &itv->i_flags)) + ivtv_vbi_work_handler(itv); + + if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_YUV, &itv->i_flags)) + ivtv_yuv_work_handler(itv); + + if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PCM, &itv->i_flags)) + ivtv_pcm_work_handler(itv); +} + +/* Determine the required DMA size, setup enough buffers in the predma queue and + actually copy the data from the card to the buffers in case a PIO transfer is + required for this stream. + */ +static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MAX_DATA]) +{ + struct ivtv *itv = s->itv; + struct ivtv_buffer *buf; + u32 bytes_needed = 0; + u32 offset, size; + u32 UVoffset = 0, UVsize = 0; + int skip_bufs = s->q_predma.buffers; + int idx = s->sg_pending_size; + int rc; + + /* sanity checks */ + if (s->vdev == NULL) { + IVTV_DEBUG_WARN("Stream %s not started\n", s->name); + return -1; + } + if (!test_bit(IVTV_F_S_CLAIMED, &s->s_flags)) { + IVTV_DEBUG_WARN("Stream %s not open\n", s->name); + return -1; + } + + /* determine offset, size and PTS for the various streams */ + switch (s->type) { + case IVTV_ENC_STREAM_TYPE_MPG: + offset = data[1]; + size = data[2]; + s->pending_pts = 0; + break; + + case IVTV_ENC_STREAM_TYPE_YUV: + offset = data[1]; + size = data[2]; + UVoffset = data[3]; + UVsize = data[4]; + s->pending_pts = ((u64) data[5] << 32) | data[6]; + break; + + case IVTV_ENC_STREAM_TYPE_PCM: + offset = data[1] + 12; + size = data[2] - 12; + s->pending_pts = read_dec(offset - 8) | + ((u64)(read_dec(offset - 12)) << 32); + if (itv->has_cx23415) + offset += IVTV_DECODER_OFFSET; + break; + + case IVTV_ENC_STREAM_TYPE_VBI: + size = itv->vbi.enc_size * itv->vbi.fpi; + offset = read_enc(itv->vbi.enc_start - 4) + 12; + if (offset == 12) { + IVTV_DEBUG_INFO("VBI offset == 0\n"); + return -1; + } + s->pending_pts = read_enc(offset - 4) | ((u64)read_enc(offset - 8) << 32); + break; + + case IVTV_DEC_STREAM_TYPE_VBI: + size = read_dec(itv->vbi.dec_start + 4) + 8; + offset = read_dec(itv->vbi.dec_start) + itv->vbi.dec_start; + s->pending_pts = 0; + offset += IVTV_DECODER_OFFSET; + break; + default: + /* shouldn't happen */ + return -1; + } + + /* if this is the start of the DMA then fill in the magic cookie */ + if (s->sg_pending_size == 0 && ivtv_use_dma(s)) { + if (itv->has_cx23415 && (s->type == IVTV_ENC_STREAM_TYPE_PCM || + s->type == IVTV_DEC_STREAM_TYPE_VBI)) { + s->pending_backup = read_dec(offset - IVTV_DECODER_OFFSET); + write_dec_sync(cpu_to_le32(DMA_MAGIC_COOKIE), offset - IVTV_DECODER_OFFSET); + } + else { + s->pending_backup = read_enc(offset); + write_enc_sync(cpu_to_le32(DMA_MAGIC_COOKIE), offset); + } + s->pending_offset = offset; + } + + bytes_needed = size; + if (s->type == IVTV_ENC_STREAM_TYPE_YUV) { + /* The size for the Y samples needs to be rounded upwards to a + multiple of the buf_size. The UV samples then start in the + next buffer. */ + bytes_needed = s->buf_size * ((bytes_needed + s->buf_size - 1) / s->buf_size); + bytes_needed += UVsize; + } + + IVTV_DEBUG_HI_DMA("%s %s: 0x%08x bytes at 0x%08x\n", + ivtv_use_pio(s) ? "PIO" : "DMA", s->name, bytes_needed, offset); + + rc = ivtv_queue_move(s, &s->q_free, &s->q_full, &s->q_predma, bytes_needed); + if (rc < 0) { /* Insufficient buffers */ + IVTV_DEBUG_WARN("Cannot obtain %d bytes for %s data transfer\n", + bytes_needed, s->name); + return -1; + } + if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) { + IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name); + IVTV_WARN("Cause: the application is not reading fast enough.\n"); + } + s->buffers_stolen = rc; + + /* got the buffers, now fill in sg_pending */ + buf = list_entry(s->q_predma.list.next, struct ivtv_buffer, list); + memset(buf->buf, 0, 128); + list_for_each_entry(buf, &s->q_predma.list, list) { + if (skip_bufs-- > 0) + continue; + s->sg_pending[idx].dst = buf->dma_handle; + s->sg_pending[idx].src = offset; + s->sg_pending[idx].size = s->buf_size; + buf->bytesused = min(size, s->buf_size); + buf->dma_xfer_cnt = s->dma_xfer_cnt; + + s->q_predma.bytesused += buf->bytesused; + size -= buf->bytesused; + offset += s->buf_size; + + /* Sync SG buffers */ + ivtv_buf_sync_for_device(s, buf); + + if (size == 0) { /* YUV */ + /* process the UV section */ + offset = UVoffset; + size = UVsize; + } + idx++; + } + s->sg_pending_size = idx; + return 0; +} + +static void dma_post(struct ivtv_stream *s) +{ + struct ivtv *itv = s->itv; + struct ivtv_buffer *buf = NULL; + struct list_head *p; + u32 offset; + __le32 *u32buf; + int x = 0; + + IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA", + s->name, s->dma_offset); + list_for_each(p, &s->q_dma.list) { + buf = list_entry(p, struct ivtv_buffer, list); + u32buf = (__le32 *)buf->buf; + + /* Sync Buffer */ + ivtv_buf_sync_for_cpu(s, buf); + + if (x == 0 && ivtv_use_dma(s)) { + offset = s->dma_last_offset; + if (u32buf[offset / 4] != DMA_MAGIC_COOKIE) + { + for (offset = 0; offset < 64; offset++) { + if (u32buf[offset] == DMA_MAGIC_COOKIE) { + break; + } + } + offset *= 4; + if (offset == 256) { + IVTV_DEBUG_WARN("%s: Couldn't find start of buffer within the first 256 bytes\n", s->name); + offset = s->dma_last_offset; + } + if (s->dma_last_offset != offset) + IVTV_DEBUG_WARN("%s: offset %d -> %d\n", s->name, s->dma_last_offset, offset); + s->dma_last_offset = offset; + } + if (itv->has_cx23415 && (s->type == IVTV_ENC_STREAM_TYPE_PCM || + s->type == IVTV_DEC_STREAM_TYPE_VBI)) { + write_dec_sync(0, s->dma_offset - IVTV_DECODER_OFFSET); + } + else { + write_enc_sync(0, s->dma_offset); + } + if (offset) { + buf->bytesused -= offset; + memcpy(buf->buf, buf->buf + offset, buf->bytesused + offset); + } + *u32buf = cpu_to_le32(s->dma_backup); + } + x++; + /* flag byteswap ABCD -> DCBA for MPG & VBI data outside irq */ + if (s->type == IVTV_ENC_STREAM_TYPE_MPG || + s->type == IVTV_ENC_STREAM_TYPE_VBI) + buf->b_flags |= IVTV_F_B_NEED_BUF_SWAP; + } + if (buf) + buf->bytesused += s->dma_last_offset; + if (buf && s->type == IVTV_DEC_STREAM_TYPE_VBI) { + list_for_each_entry(buf, &s->q_dma.list, list) { + /* Parse and Groom VBI Data */ + s->q_dma.bytesused -= buf->bytesused; + ivtv_process_vbi_data(itv, buf, 0, s->type); + s->q_dma.bytesused += buf->bytesused; + } + if (s->fh == NULL) { + ivtv_queue_move(s, &s->q_dma, NULL, &s->q_free, 0); + return; + } + } + + ivtv_queue_move(s, &s->q_dma, NULL, &s->q_full, s->q_dma.bytesused); + + if (s->type == IVTV_ENC_STREAM_TYPE_PCM && + itv->pcm_announce_callback != NULL) { + /* + * Set up the work handler to pass the data to ivtv-alsa. + * + * We just use q_full and let the work handler race with users + * making ivtv-fileops.c calls on the PCM device node. + * + * Users should not be using both the ALSA and V4L2 PCM audio + * capture interfaces at the same time. If the user does this, + * fragments of data will just go out each interface as they + * race for PCM data. + */ + set_bit(IVTV_F_I_WORK_HANDLER_PCM, &itv->i_flags); + set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags); + } + + if (s->fh) + wake_up(&s->waitq); +} + +void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock) +{ + struct ivtv *itv = s->itv; + struct yuv_playback_info *yi = &itv->yuv_info; + u8 frame = yi->draw_frame; + struct yuv_frame_info *f = &yi->new_frame_info[frame]; + struct ivtv_buffer *buf; + u32 y_size = 720 * ((f->src_h + 31) & ~31); + u32 uv_offset = offset + IVTV_YUV_BUFFER_UV_OFFSET; + int y_done = 0; + int bytes_written = 0; + unsigned long flags = 0; + int idx = 0; + + IVTV_DEBUG_HI_DMA("DEC PREPARE DMA %s: %08x %08x\n", s->name, s->q_predma.bytesused, offset); + + /* Insert buffer block for YUV if needed */ + if (s->type == IVTV_DEC_STREAM_TYPE_YUV && f->offset_y) { + if (yi->blanking_dmaptr) { + s->sg_pending[idx].src = yi->blanking_dmaptr; + s->sg_pending[idx].dst = offset; + s->sg_pending[idx].size = 720 * 16; + } + offset += 720 * 16; + idx++; + } + + list_for_each_entry(buf, &s->q_predma.list, list) { + /* YUV UV Offset from Y Buffer */ + if (s->type == IVTV_DEC_STREAM_TYPE_YUV && !y_done && + (bytes_written + buf->bytesused) >= y_size) { + s->sg_pending[idx].src = buf->dma_handle; + s->sg_pending[idx].dst = offset; + s->sg_pending[idx].size = y_size - bytes_written; + offset = uv_offset; + if (s->sg_pending[idx].size != buf->bytesused) { + idx++; + s->sg_pending[idx].src = + buf->dma_handle + s->sg_pending[idx - 1].size; + s->sg_pending[idx].dst = offset; + s->sg_pending[idx].size = + buf->bytesused - s->sg_pending[idx - 1].size; + offset += s->sg_pending[idx].size; + } + y_done = 1; + } else { + s->sg_pending[idx].src = buf->dma_handle; + s->sg_pending[idx].dst = offset; + s->sg_pending[idx].size = buf->bytesused; + offset += buf->bytesused; + } + bytes_written += buf->bytesused; + + /* Sync SG buffers */ + ivtv_buf_sync_for_device(s, buf); + idx++; + } + s->sg_pending_size = idx; + + /* Sync Hardware SG List of buffers */ + ivtv_stream_sync_for_device(s); + if (lock) + spin_lock_irqsave(&itv->dma_reg_lock, flags); + if (!test_bit(IVTV_F_I_DMA, &itv->i_flags)) { + ivtv_dma_dec_start(s); + } + else { + set_bit(IVTV_F_S_DMA_PENDING, &s->s_flags); + } + if (lock) + spin_unlock_irqrestore(&itv->dma_reg_lock, flags); +} + +static void ivtv_dma_enc_start_xfer(struct ivtv_stream *s) +{ + struct ivtv *itv = s->itv; + + s->sg_dma->src = cpu_to_le32(s->sg_processing[s->sg_processed].src); + s->sg_dma->dst = cpu_to_le32(s->sg_processing[s->sg_processed].dst); + s->sg_dma->size = cpu_to_le32(s->sg_processing[s->sg_processed].size | 0x80000000); + s->sg_processed++; + /* Sync Hardware SG List of buffers */ + ivtv_stream_sync_for_device(s); + write_reg(s->sg_handle, IVTV_REG_ENCDMAADDR); + write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x02, IVTV_REG_DMAXFER); + itv->dma_timer.expires = jiffies + msecs_to_jiffies(300); + add_timer(&itv->dma_timer); +} + +static void ivtv_dma_dec_start_xfer(struct ivtv_stream *s) +{ + struct ivtv *itv = s->itv; + + s->sg_dma->src = cpu_to_le32(s->sg_processing[s->sg_processed].src); + s->sg_dma->dst = cpu_to_le32(s->sg_processing[s->sg_processed].dst); + s->sg_dma->size = cpu_to_le32(s->sg_processing[s->sg_processed].size | 0x80000000); + s->sg_processed++; + /* Sync Hardware SG List of buffers */ + ivtv_stream_sync_for_device(s); + write_reg(s->sg_handle, IVTV_REG_DECDMAADDR); + write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x01, IVTV_REG_DMAXFER); + itv->dma_timer.expires = jiffies + msecs_to_jiffies(300); + add_timer(&itv->dma_timer); +} + +/* start the encoder DMA */ +static void ivtv_dma_enc_start(struct ivtv_stream *s) +{ + struct ivtv *itv = s->itv; + struct ivtv_stream *s_vbi = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; + int i; + + IVTV_DEBUG_HI_DMA("start %s for %s\n", ivtv_use_dma(s) ? "DMA" : "PIO", s->name); + + if (s->q_predma.bytesused) + ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused); + + if (ivtv_use_dma(s)) + s->sg_pending[s->sg_pending_size - 1].size += 256; + + /* If this is an MPEG stream, and VBI data is also pending, then append the + VBI DMA to the MPEG DMA and transfer both sets of data at once. + + VBI DMA is a second class citizen compared to MPEG and mixing them together + will confuse the firmware (the end of a VBI DMA is seen as the end of a + MPEG DMA, thus effectively dropping an MPEG frame). So instead we make + sure we only use the MPEG DMA to transfer the VBI DMA if both are in + use. This way no conflicts occur. */ + clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags); + if (s->type == IVTV_ENC_STREAM_TYPE_MPG && s_vbi->sg_pending_size && + s->sg_pending_size + s_vbi->sg_pending_size <= s->buffers) { + ivtv_queue_move(s_vbi, &s_vbi->q_predma, NULL, &s_vbi->q_dma, s_vbi->q_predma.bytesused); + if (ivtv_use_dma(s_vbi)) + s_vbi->sg_pending[s_vbi->sg_pending_size - 1].size += 256; + for (i = 0; i < s_vbi->sg_pending_size; i++) { + s->sg_pending[s->sg_pending_size++] = s_vbi->sg_pending[i]; + } + s_vbi->dma_offset = s_vbi->pending_offset; + s_vbi->sg_pending_size = 0; + s_vbi->dma_xfer_cnt++; + set_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags); + IVTV_DEBUG_HI_DMA("include DMA for %s\n", s_vbi->name); + } + + s->dma_xfer_cnt++; + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); + s->sg_processing_size = s->sg_pending_size; + s->sg_pending_size = 0; + s->sg_processed = 0; + s->dma_offset = s->pending_offset; + s->dma_backup = s->pending_backup; + s->dma_pts = s->pending_pts; + + if (ivtv_use_pio(s)) { + set_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags); + set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags); + set_bit(IVTV_F_I_PIO, &itv->i_flags); + itv->cur_pio_stream = s->type; + } + else { + itv->dma_retries = 0; + ivtv_dma_enc_start_xfer(s); + set_bit(IVTV_F_I_DMA, &itv->i_flags); + itv->cur_dma_stream = s->type; + } +} + +static void ivtv_dma_dec_start(struct ivtv_stream *s) +{ + struct ivtv *itv = s->itv; + + if (s->q_predma.bytesused) + ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused); + s->dma_xfer_cnt++; + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); + s->sg_processing_size = s->sg_pending_size; + s->sg_pending_size = 0; + s->sg_processed = 0; + + IVTV_DEBUG_HI_DMA("start DMA for %s\n", s->name); + itv->dma_retries = 0; + ivtv_dma_dec_start_xfer(s); + set_bit(IVTV_F_I_DMA, &itv->i_flags); + itv->cur_dma_stream = s->type; +} + +static void ivtv_irq_dma_read(struct ivtv *itv) +{ + struct ivtv_stream *s = NULL; + struct ivtv_buffer *buf; + int hw_stream_type = 0; + + IVTV_DEBUG_HI_IRQ("DEC DMA READ\n"); + + del_timer(&itv->dma_timer); + + if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) && itv->cur_dma_stream < 0) + return; + + if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { + s = &itv->streams[itv->cur_dma_stream]; + ivtv_stream_sync_for_cpu(s); + + if (read_reg(IVTV_REG_DMASTATUS) & 0x14) { + IVTV_DEBUG_WARN("DEC DMA ERROR %x (xfer %d of %d, retry %d)\n", + read_reg(IVTV_REG_DMASTATUS), + s->sg_processed, s->sg_processing_size, itv->dma_retries); + write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS); + if (itv->dma_retries == 3) { + /* Too many retries, give up on this frame */ + itv->dma_retries = 0; + s->sg_processed = s->sg_processing_size; + } + else { + /* Retry, starting with the first xfer segment. + Just retrying the current segment is not sufficient. */ + s->sg_processed = 0; + itv->dma_retries++; + } + } + if (s->sg_processed < s->sg_processing_size) { + /* DMA next buffer */ + ivtv_dma_dec_start_xfer(s); + return; + } + if (s->type == IVTV_DEC_STREAM_TYPE_YUV) + hw_stream_type = 2; + IVTV_DEBUG_HI_DMA("DEC DATA READ %s: %d\n", s->name, s->q_dma.bytesused); + + /* For some reason must kick the firmware, like PIO mode, + I think this tells the firmware we are done and the size + of the xfer so it can calculate what we need next. + I think we can do this part ourselves but would have to + fully calculate xfer info ourselves and not use interrupts + */ + ivtv_vapi(itv, CX2341X_DEC_SCHED_DMA_FROM_HOST, 3, 0, s->q_dma.bytesused, + hw_stream_type); + + /* Free last DMA call */ + while ((buf = ivtv_dequeue(s, &s->q_dma)) != NULL) { + ivtv_buf_sync_for_cpu(s, buf); + ivtv_enqueue(s, buf, &s->q_free); + } + wake_up(&s->waitq); + } + clear_bit(IVTV_F_I_UDMA, &itv->i_flags); + clear_bit(IVTV_F_I_DMA, &itv->i_flags); + itv->cur_dma_stream = -1; + wake_up(&itv->dma_waitq); +} + +static void ivtv_irq_enc_dma_complete(struct ivtv *itv) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + struct ivtv_stream *s; + + ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, 2, data); + IVTV_DEBUG_HI_IRQ("ENC DMA COMPLETE %x %d (%d)\n", data[0], data[1], itv->cur_dma_stream); + + del_timer(&itv->dma_timer); + + if (itv->cur_dma_stream < 0) + return; + + s = &itv->streams[itv->cur_dma_stream]; + ivtv_stream_sync_for_cpu(s); + + if (data[0] & 0x18) { + IVTV_DEBUG_WARN("ENC DMA ERROR %x (offset %08x, xfer %d of %d, retry %d)\n", data[0], + s->dma_offset, s->sg_processed, s->sg_processing_size, itv->dma_retries); + write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS); + if (itv->dma_retries == 3) { + /* Too many retries, give up on this frame */ + itv->dma_retries = 0; + s->sg_processed = s->sg_processing_size; + } + else { + /* Retry, starting with the first xfer segment. + Just retrying the current segment is not sufficient. */ + s->sg_processed = 0; + itv->dma_retries++; + } + } + if (s->sg_processed < s->sg_processing_size) { + /* DMA next buffer */ + ivtv_dma_enc_start_xfer(s); + return; + } + clear_bit(IVTV_F_I_DMA, &itv->i_flags); + itv->cur_dma_stream = -1; + dma_post(s); + if (test_and_clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags)) { + s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; + dma_post(s); + } + s->sg_processing_size = 0; + s->sg_processed = 0; + wake_up(&itv->dma_waitq); +} + +static void ivtv_irq_enc_pio_complete(struct ivtv *itv) +{ + struct ivtv_stream *s; + + if (itv->cur_pio_stream < 0 || itv->cur_pio_stream >= IVTV_MAX_STREAMS) { + itv->cur_pio_stream = -1; + return; + } + s = &itv->streams[itv->cur_pio_stream]; + IVTV_DEBUG_HI_IRQ("ENC PIO COMPLETE %s\n", s->name); + clear_bit(IVTV_F_I_PIO, &itv->i_flags); + itv->cur_pio_stream = -1; + dma_post(s); + if (s->type == IVTV_ENC_STREAM_TYPE_MPG) + ivtv_vapi(itv, CX2341X_ENC_SCHED_DMA_TO_HOST, 3, 0, 0, 0); + else if (s->type == IVTV_ENC_STREAM_TYPE_YUV) + ivtv_vapi(itv, CX2341X_ENC_SCHED_DMA_TO_HOST, 3, 0, 0, 1); + else if (s->type == IVTV_ENC_STREAM_TYPE_PCM) + ivtv_vapi(itv, CX2341X_ENC_SCHED_DMA_TO_HOST, 3, 0, 0, 2); + clear_bit(IVTV_F_I_PIO, &itv->i_flags); + if (test_and_clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags)) { + s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; + dma_post(s); + } + wake_up(&itv->dma_waitq); +} + +static void ivtv_irq_dma_err(struct ivtv *itv) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + u32 status; + + del_timer(&itv->dma_timer); + + ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, 2, data); + status = read_reg(IVTV_REG_DMASTATUS); + IVTV_DEBUG_WARN("DMA ERROR %08x %08x %08x %d\n", data[0], data[1], + status, itv->cur_dma_stream); + /* + * We do *not* write back to the IVTV_REG_DMASTATUS register to + * clear the error status, if either the encoder write (0x02) or + * decoder read (0x01) bus master DMA operation do not indicate + * completed. We can race with the DMA engine, which may have + * transitioned to completed status *after* we read the register. + * Setting a IVTV_REG_DMASTATUS flag back to "busy" status, after the + * DMA engine has completed, will cause the DMA engine to stop working. + */ + status &= 0x3; + if (status == 0x3) + write_reg(status, IVTV_REG_DMASTATUS); + + if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) && + itv->cur_dma_stream >= 0 && itv->cur_dma_stream < IVTV_MAX_STREAMS) { + struct ivtv_stream *s = &itv->streams[itv->cur_dma_stream]; + + if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) { + /* retry */ + /* + * FIXME - handle cases of DMA error similar to + * encoder below, except conditioned on status & 0x1 + */ + ivtv_dma_dec_start(s); + return; + } else { + if ((status & 0x2) == 0) { + /* + * CX2341x Bus Master DMA write is ongoing. + * Reset the timer and let it complete. + */ + itv->dma_timer.expires = + jiffies + msecs_to_jiffies(600); + add_timer(&itv->dma_timer); + return; + } + + if (itv->dma_retries < 3) { + /* + * CX2341x Bus Master DMA write has ended. + * Retry the write, starting with the first + * xfer segment. Just retrying the current + * segment is not sufficient. + */ + s->sg_processed = 0; + itv->dma_retries++; + ivtv_dma_enc_start_xfer(s); + return; + } + /* Too many retries, give up on this one */ + } + + } + if (test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { + ivtv_udma_start(itv); + return; + } + clear_bit(IVTV_F_I_UDMA, &itv->i_flags); + clear_bit(IVTV_F_I_DMA, &itv->i_flags); + itv->cur_dma_stream = -1; + wake_up(&itv->dma_waitq); +} + +static void ivtv_irq_enc_start_cap(struct ivtv *itv) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + struct ivtv_stream *s; + + /* Get DMA destination and size arguments from card */ + ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA, 7, data); + IVTV_DEBUG_HI_IRQ("ENC START CAP %d: %08x %08x\n", data[0], data[1], data[2]); + + if (data[0] > 2 || data[1] == 0 || data[2] == 0) { + IVTV_DEBUG_WARN("Unknown input: %08x %08x %08x\n", + data[0], data[1], data[2]); + return; + } + s = &itv->streams[ivtv_stream_map[data[0]]]; + if (!stream_enc_dma_append(s, data)) { + set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags); + } +} + +static void ivtv_irq_enc_vbi_cap(struct ivtv *itv) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + struct ivtv_stream *s; + + IVTV_DEBUG_HI_IRQ("ENC START VBI CAP\n"); + s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; + + if (!stream_enc_dma_append(s, data)) + set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags); +} + +static void ivtv_irq_dec_vbi_reinsert(struct ivtv *itv) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + struct ivtv_stream *s = &itv->streams[IVTV_DEC_STREAM_TYPE_VBI]; + + IVTV_DEBUG_HI_IRQ("DEC VBI REINSERT\n"); + if (test_bit(IVTV_F_S_CLAIMED, &s->s_flags) && + !stream_enc_dma_append(s, data)) { + set_bit(IVTV_F_S_PIO_PENDING, &s->s_flags); + } +} + +static void ivtv_irq_dec_data_req(struct ivtv *itv) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + struct ivtv_stream *s; + + /* YUV or MPG */ + + if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) { + ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 2, data); + itv->dma_data_req_size = + 1080 * ((itv->yuv_info.v4l2_src_h + 31) & ~31); + itv->dma_data_req_offset = data[1]; + if (atomic_read(&itv->yuv_info.next_dma_frame) >= 0) + ivtv_yuv_frame_complete(itv); + s = &itv->streams[IVTV_DEC_STREAM_TYPE_YUV]; + } + else { + ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 3, data); + itv->dma_data_req_size = min_t(u32, data[2], 0x10000); + itv->dma_data_req_offset = data[1]; + s = &itv->streams[IVTV_DEC_STREAM_TYPE_MPG]; + } + IVTV_DEBUG_HI_IRQ("DEC DATA REQ %s: %d %08x %u\n", s->name, s->q_full.bytesused, + itv->dma_data_req_offset, itv->dma_data_req_size); + if (itv->dma_data_req_size == 0 || s->q_full.bytesused < itv->dma_data_req_size) { + set_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags); + } + else { + if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) + ivtv_yuv_setup_stream_frame(itv); + clear_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags); + ivtv_queue_move(s, &s->q_full, NULL, &s->q_predma, itv->dma_data_req_size); + ivtv_dma_stream_dec_prepare(s, itv->dma_data_req_offset + IVTV_DECODER_OFFSET, 0); + } +} + +static void ivtv_irq_vsync(struct ivtv *itv) +{ + /* The vsync interrupt is unusual in that it won't clear until + * the end of the first line for the current field, at which + * point it clears itself. This can result in repeated vsync + * interrupts, or a missed vsync. Read some of the registers + * to determine the line being displayed and ensure we handle + * one vsync per frame. + */ + unsigned int frame = read_reg(IVTV_REG_DEC_LINE_FIELD) & 1; + struct yuv_playback_info *yi = &itv->yuv_info; + int last_dma_frame = atomic_read(&yi->next_dma_frame); + struct yuv_frame_info *f = &yi->new_frame_info[last_dma_frame]; + + if (0) IVTV_DEBUG_IRQ("DEC VSYNC\n"); + + if (((frame ^ f->sync_field) == 0 && + ((itv->last_vsync_field & 1) ^ f->sync_field)) || + (frame != (itv->last_vsync_field & 1) && !f->interlaced)) { + int next_dma_frame = last_dma_frame; + + if (!(f->interlaced && f->delay && yi->fields_lapsed < 1)) { + if (next_dma_frame >= 0 && next_dma_frame != atomic_read(&yi->next_fill_frame)) { + write_reg(yuv_offset[next_dma_frame] >> 4, 0x82c); + write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x830); + write_reg(yuv_offset[next_dma_frame] >> 4, 0x834); + write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x838); + next_dma_frame = (next_dma_frame + 1) % IVTV_YUV_BUFFERS; + atomic_set(&yi->next_dma_frame, next_dma_frame); + yi->fields_lapsed = -1; + yi->running = 1; + } + } + } + if (frame != (itv->last_vsync_field & 1)) { + static const struct v4l2_event evtop = { + .type = V4L2_EVENT_VSYNC, + .u.vsync.field = V4L2_FIELD_TOP, + }; + static const struct v4l2_event evbottom = { + .type = V4L2_EVENT_VSYNC, + .u.vsync.field = V4L2_FIELD_BOTTOM, + }; + struct ivtv_stream *s = ivtv_get_output_stream(itv); + + itv->last_vsync_field += 1; + if (frame == 0) { + clear_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags); + clear_bit(IVTV_F_I_EV_VSYNC_FIELD, &itv->i_flags); + } + else { + set_bit(IVTV_F_I_EV_VSYNC_FIELD, &itv->i_flags); + } + if (test_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags)) { + set_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags); + wake_up(&itv->event_waitq); + if (s) + wake_up(&s->waitq); + } + if (s && s->vdev) + v4l2_event_queue(s->vdev, frame ? &evtop : &evbottom); + wake_up(&itv->vsync_waitq); + + /* Send VBI to saa7127 */ + if (frame && (itv->output_mode == OUT_PASSTHROUGH || + test_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags) || + test_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags) || + test_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags))) { + set_bit(IVTV_F_I_WORK_HANDLER_VBI, &itv->i_flags); + set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags); + } + + /* Check if we need to update the yuv registers */ + if (yi->running && (yi->yuv_forced_update || f->update)) { + if (!f->update) { + last_dma_frame = + (u8)(atomic_read(&yi->next_dma_frame) - + 1) % IVTV_YUV_BUFFERS; + f = &yi->new_frame_info[last_dma_frame]; + } + + if (f->src_w) { + yi->update_frame = last_dma_frame; + f->update = 0; + yi->yuv_forced_update = 0; + set_bit(IVTV_F_I_WORK_HANDLER_YUV, &itv->i_flags); + set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags); + } + } + + yi->fields_lapsed++; + } +} + +#define IVTV_IRQ_DMA (IVTV_IRQ_DMA_READ | IVTV_IRQ_ENC_DMA_COMPLETE | IVTV_IRQ_DMA_ERR | IVTV_IRQ_ENC_START_CAP | IVTV_IRQ_ENC_VBI_CAP | IVTV_IRQ_DEC_DATA_REQ | IVTV_IRQ_DEC_VBI_RE_INSERT) + +irqreturn_t ivtv_irq_handler(int irq, void *dev_id) +{ + struct ivtv *itv = (struct ivtv *)dev_id; + u32 combo; + u32 stat; + int i; + u8 vsync_force = 0; + + spin_lock(&itv->dma_reg_lock); + /* get contents of irq status register */ + stat = read_reg(IVTV_REG_IRQSTATUS); + + combo = ~itv->irqmask & stat; + + /* Clear out IRQ */ + if (combo) write_reg(combo, IVTV_REG_IRQSTATUS); + + if (0 == combo) { + /* The vsync interrupt is unusual and clears itself. If we + * took too long, we may have missed it. Do some checks + */ + if (~itv->irqmask & IVTV_IRQ_DEC_VSYNC) { + /* vsync is enabled, see if we're in a new field */ + if ((itv->last_vsync_field & 1) != + (read_reg(IVTV_REG_DEC_LINE_FIELD) & 1)) { + /* New field, looks like we missed it */ + IVTV_DEBUG_YUV("VSync interrupt missed %d\n", + read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16); + vsync_force = 1; + } + } + + if (!vsync_force) { + /* No Vsync expected, wasn't for us */ + spin_unlock(&itv->dma_reg_lock); + return IRQ_NONE; + } + } + + /* Exclude interrupts noted below from the output, otherwise the log is flooded with + these messages */ + if (combo & ~0xff6d0400) + IVTV_DEBUG_HI_IRQ("======= valid IRQ bits: 0x%08x ======\n", combo); + + if (combo & IVTV_IRQ_DEC_DMA_COMPLETE) { + IVTV_DEBUG_HI_IRQ("DEC DMA COMPLETE\n"); + } + + if (combo & IVTV_IRQ_DMA_READ) { + ivtv_irq_dma_read(itv); + } + + if (combo & IVTV_IRQ_ENC_DMA_COMPLETE) { + ivtv_irq_enc_dma_complete(itv); + } + + if (combo & IVTV_IRQ_ENC_PIO_COMPLETE) { + ivtv_irq_enc_pio_complete(itv); + } + + if (combo & IVTV_IRQ_DMA_ERR) { + ivtv_irq_dma_err(itv); + } + + if (combo & IVTV_IRQ_ENC_START_CAP) { + ivtv_irq_enc_start_cap(itv); + } + + if (combo & IVTV_IRQ_ENC_VBI_CAP) { + ivtv_irq_enc_vbi_cap(itv); + } + + if (combo & IVTV_IRQ_DEC_VBI_RE_INSERT) { + ivtv_irq_dec_vbi_reinsert(itv); + } + + if (combo & IVTV_IRQ_ENC_EOS) { + IVTV_DEBUG_IRQ("ENC EOS\n"); + set_bit(IVTV_F_I_EOS, &itv->i_flags); + wake_up(&itv->eos_waitq); + } + + if (combo & IVTV_IRQ_DEC_DATA_REQ) { + ivtv_irq_dec_data_req(itv); + } + + /* Decoder Vertical Sync - We can't rely on 'combo', so check if vsync enabled */ + if (~itv->irqmask & IVTV_IRQ_DEC_VSYNC) { + ivtv_irq_vsync(itv); + } + + if (combo & IVTV_IRQ_ENC_VIM_RST) { + IVTV_DEBUG_IRQ("VIM RST\n"); + /*ivtv_vapi(itv, CX2341X_ENC_REFRESH_INPUT, 0); */ + } + + if (combo & IVTV_IRQ_DEC_AUD_MODE_CHG) { + IVTV_DEBUG_INFO("Stereo mode changed\n"); + } + + if ((combo & IVTV_IRQ_DMA) && !test_bit(IVTV_F_I_DMA, &itv->i_flags)) { + itv->irq_rr_idx++; + for (i = 0; i < IVTV_MAX_STREAMS; i++) { + int idx = (i + itv->irq_rr_idx) % IVTV_MAX_STREAMS; + struct ivtv_stream *s = &itv->streams[idx]; + + if (!test_and_clear_bit(IVTV_F_S_DMA_PENDING, &s->s_flags)) + continue; + if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) + ivtv_dma_dec_start(s); + else + ivtv_dma_enc_start(s); + break; + } + + if (i == IVTV_MAX_STREAMS && + test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags)) + ivtv_udma_start(itv); + } + + if ((combo & IVTV_IRQ_DMA) && !test_bit(IVTV_F_I_PIO, &itv->i_flags)) { + itv->irq_rr_idx++; + for (i = 0; i < IVTV_MAX_STREAMS; i++) { + int idx = (i + itv->irq_rr_idx) % IVTV_MAX_STREAMS; + struct ivtv_stream *s = &itv->streams[idx]; + + if (!test_and_clear_bit(IVTV_F_S_PIO_PENDING, &s->s_flags)) + continue; + if (s->type == IVTV_DEC_STREAM_TYPE_VBI || s->type < IVTV_DEC_STREAM_TYPE_MPG) + ivtv_dma_enc_start(s); + break; + } + } + + if (test_and_clear_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags)) { + queue_kthread_work(&itv->irq_worker, &itv->irq_work); + } + + spin_unlock(&itv->dma_reg_lock); + + /* If we've just handled a 'forced' vsync, it's safest to say it + * wasn't ours. Another device may have triggered it at just + * the right time. + */ + return vsync_force ? IRQ_NONE : IRQ_HANDLED; +} + +void ivtv_unfinished_dma(unsigned long arg) +{ + struct ivtv *itv = (struct ivtv *)arg; + + if (!test_bit(IVTV_F_I_DMA, &itv->i_flags)) + return; + IVTV_ERR("DMA TIMEOUT %08x %d\n", read_reg(IVTV_REG_DMASTATUS), itv->cur_dma_stream); + + write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS); + clear_bit(IVTV_F_I_UDMA, &itv->i_flags); + clear_bit(IVTV_F_I_DMA, &itv->i_flags); + itv->cur_dma_stream = -1; + wake_up(&itv->dma_waitq); +} diff --git a/drivers/media/pci/ivtv/ivtv-irq.h b/drivers/media/pci/ivtv/ivtv-irq.h new file mode 100644 index 00000000..1e844337 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-irq.h @@ -0,0 +1,53 @@ +/* + interrupt handling + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_IRQ_H +#define IVTV_IRQ_H + +#define IVTV_IRQ_ENC_START_CAP (0x1 << 31) +#define IVTV_IRQ_ENC_EOS (0x1 << 30) +#define IVTV_IRQ_ENC_VBI_CAP (0x1 << 29) +#define IVTV_IRQ_ENC_VIM_RST (0x1 << 28) +#define IVTV_IRQ_ENC_DMA_COMPLETE (0x1 << 27) +#define IVTV_IRQ_ENC_PIO_COMPLETE (0x1 << 25) +#define IVTV_IRQ_DEC_AUD_MODE_CHG (0x1 << 24) +#define IVTV_IRQ_DEC_DATA_REQ (0x1 << 22) +#define IVTV_IRQ_DEC_DMA_COMPLETE (0x1 << 20) +#define IVTV_IRQ_DEC_VBI_RE_INSERT (0x1 << 19) +#define IVTV_IRQ_DMA_ERR (0x1 << 18) +#define IVTV_IRQ_DMA_WRITE (0x1 << 17) +#define IVTV_IRQ_DMA_READ (0x1 << 16) +#define IVTV_IRQ_DEC_VSYNC (0x1 << 10) + +/* IRQ Masks */ +#define IVTV_IRQ_MASK_INIT (IVTV_IRQ_DMA_ERR|IVTV_IRQ_ENC_DMA_COMPLETE|\ + IVTV_IRQ_DMA_READ|IVTV_IRQ_ENC_PIO_COMPLETE) + +#define IVTV_IRQ_MASK_CAPTURE (IVTV_IRQ_ENC_START_CAP | IVTV_IRQ_ENC_EOS) +#define IVTV_IRQ_MASK_DECODE (IVTV_IRQ_DEC_DATA_REQ|IVTV_IRQ_DEC_AUD_MODE_CHG) + +irqreturn_t ivtv_irq_handler(int irq, void *dev_id); + +void ivtv_irq_work_handler(struct kthread_work *work); +void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock); +void ivtv_unfinished_dma(unsigned long arg); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-mailbox.c b/drivers/media/pci/ivtv/ivtv-mailbox.c new file mode 100644 index 00000000..e3ce9676 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-mailbox.c @@ -0,0 +1,387 @@ +/* + mailbox functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include "ivtv-driver.h" +#include "ivtv-mailbox.h" + +/* Firmware mailbox flags*/ +#define IVTV_MBOX_FIRMWARE_DONE 0x00000004 +#define IVTV_MBOX_DRIVER_DONE 0x00000002 +#define IVTV_MBOX_DRIVER_BUSY 0x00000001 +#define IVTV_MBOX_FREE 0x00000000 + +/* Firmware mailbox standard timeout */ +#define IVTV_API_STD_TIMEOUT 0x02000000 + +#define API_CACHE (1 << 0) /* Allow the command to be stored in the cache */ +#define API_RESULT (1 << 1) /* Allow 1 second for this cmd to end */ +#define API_FAST_RESULT (3 << 1) /* Allow 0.1 second for this cmd to end */ +#define API_DMA (1 << 3) /* DMA mailbox, has special handling */ +#define API_HIGH_VOL (1 << 5) /* High volume command (i.e. called during encoding or decoding) */ +#define API_NO_WAIT_MB (1 << 4) /* Command may not wait for a free mailbox */ +#define API_NO_WAIT_RES (1 << 5) /* Command may not wait for the result */ +#define API_NO_POLL (1 << 6) /* Avoid pointless polling */ + +struct ivtv_api_info { + int flags; /* Flags, see above */ + const char *name; /* The name of the command */ +}; + +#define API_ENTRY(x, f) [x] = { (f), #x } + +static const struct ivtv_api_info api_info[256] = { + /* MPEG encoder API */ + API_ENTRY(CX2341X_ENC_PING_FW, API_FAST_RESULT), + API_ENTRY(CX2341X_ENC_START_CAPTURE, API_RESULT | API_NO_POLL), + API_ENTRY(CX2341X_ENC_STOP_CAPTURE, API_RESULT), + API_ENTRY(CX2341X_ENC_SET_AUDIO_ID, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_VIDEO_ID, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_PCR_ID, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_FRAME_RATE, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_FRAME_SIZE, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_BIT_RATE, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_GOP_PROPERTIES, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_ASPECT_RATIO, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_DNR_FILTER_MODE, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_DNR_FILTER_PROPS, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_CORING_LEVELS, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_VBI_LINE, API_RESULT), + API_ENTRY(CX2341X_ENC_SET_STREAM_TYPE, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_OUTPUT_PORT, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_AUDIO_PROPERTIES, API_CACHE), + API_ENTRY(CX2341X_ENC_HALT_FW, API_FAST_RESULT), + API_ENTRY(CX2341X_ENC_GET_VERSION, API_FAST_RESULT), + API_ENTRY(CX2341X_ENC_SET_GOP_CLOSURE, API_CACHE), + API_ENTRY(CX2341X_ENC_GET_SEQ_END, API_RESULT), + API_ENTRY(CX2341X_ENC_SET_PGM_INDEX_INFO, API_FAST_RESULT), + API_ENTRY(CX2341X_ENC_SET_VBI_CONFIG, API_RESULT), + API_ENTRY(CX2341X_ENC_SET_DMA_BLOCK_SIZE, API_CACHE), + API_ENTRY(CX2341X_ENC_GET_PREV_DMA_INFO_MB_10, API_FAST_RESULT), + API_ENTRY(CX2341X_ENC_GET_PREV_DMA_INFO_MB_9, API_FAST_RESULT), + API_ENTRY(CX2341X_ENC_SCHED_DMA_TO_HOST, API_DMA | API_HIGH_VOL), + API_ENTRY(CX2341X_ENC_INITIALIZE_INPUT, API_RESULT), + API_ENTRY(CX2341X_ENC_SET_FRAME_DROP_RATE, API_CACHE), + API_ENTRY(CX2341X_ENC_PAUSE_ENCODER, API_RESULT), + API_ENTRY(CX2341X_ENC_REFRESH_INPUT, API_NO_WAIT_MB | API_HIGH_VOL), + API_ENTRY(CX2341X_ENC_SET_COPYRIGHT, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_EVENT_NOTIFICATION, API_RESULT), + API_ENTRY(CX2341X_ENC_SET_NUM_VSYNC_LINES, API_CACHE), + API_ENTRY(CX2341X_ENC_SET_PLACEHOLDER, API_CACHE), + API_ENTRY(CX2341X_ENC_MUTE_VIDEO, API_RESULT), + API_ENTRY(CX2341X_ENC_MUTE_AUDIO, API_RESULT), + API_ENTRY(CX2341X_ENC_SET_VERT_CROP_LINE, API_FAST_RESULT), + API_ENTRY(CX2341X_ENC_MISC, API_FAST_RESULT), + /* Obsolete PULLDOWN API command */ + API_ENTRY(0xb1, API_CACHE), + + /* MPEG decoder API */ + API_ENTRY(CX2341X_DEC_PING_FW, API_FAST_RESULT), + API_ENTRY(CX2341X_DEC_START_PLAYBACK, API_RESULT | API_NO_POLL), + API_ENTRY(CX2341X_DEC_STOP_PLAYBACK, API_RESULT), + API_ENTRY(CX2341X_DEC_SET_PLAYBACK_SPEED, API_RESULT), + API_ENTRY(CX2341X_DEC_STEP_VIDEO, API_RESULT), + API_ENTRY(CX2341X_DEC_SET_DMA_BLOCK_SIZE, API_CACHE), + API_ENTRY(CX2341X_DEC_GET_XFER_INFO, API_FAST_RESULT), + API_ENTRY(CX2341X_DEC_GET_DMA_STATUS, API_FAST_RESULT), + API_ENTRY(CX2341X_DEC_SCHED_DMA_FROM_HOST, API_DMA | API_HIGH_VOL), + API_ENTRY(CX2341X_DEC_PAUSE_PLAYBACK, API_RESULT), + API_ENTRY(CX2341X_DEC_HALT_FW, API_FAST_RESULT), + API_ENTRY(CX2341X_DEC_SET_STANDARD, API_CACHE), + API_ENTRY(CX2341X_DEC_GET_VERSION, API_FAST_RESULT), + API_ENTRY(CX2341X_DEC_SET_STREAM_INPUT, API_CACHE), + API_ENTRY(CX2341X_DEC_GET_TIMING_INFO, API_RESULT /*| API_NO_WAIT_RES*/), + API_ENTRY(CX2341X_DEC_SET_AUDIO_MODE, API_CACHE), + API_ENTRY(CX2341X_DEC_SET_EVENT_NOTIFICATION, API_RESULT), + API_ENTRY(CX2341X_DEC_SET_DISPLAY_BUFFERS, API_CACHE), + API_ENTRY(CX2341X_DEC_EXTRACT_VBI, API_RESULT), + API_ENTRY(CX2341X_DEC_SET_DECODER_SOURCE, API_FAST_RESULT), + API_ENTRY(CX2341X_DEC_SET_PREBUFFERING, API_CACHE), + + /* OSD API */ + API_ENTRY(CX2341X_OSD_GET_FRAMEBUFFER, API_FAST_RESULT), + API_ENTRY(CX2341X_OSD_GET_PIXEL_FORMAT, API_FAST_RESULT), + API_ENTRY(CX2341X_OSD_SET_PIXEL_FORMAT, API_CACHE), + API_ENTRY(CX2341X_OSD_GET_STATE, API_FAST_RESULT), + API_ENTRY(CX2341X_OSD_SET_STATE, API_CACHE), + API_ENTRY(CX2341X_OSD_GET_OSD_COORDS, API_FAST_RESULT), + API_ENTRY(CX2341X_OSD_SET_OSD_COORDS, API_CACHE), + API_ENTRY(CX2341X_OSD_GET_SCREEN_COORDS, API_FAST_RESULT), + API_ENTRY(CX2341X_OSD_SET_SCREEN_COORDS, API_CACHE), + API_ENTRY(CX2341X_OSD_GET_GLOBAL_ALPHA, API_FAST_RESULT), + API_ENTRY(CX2341X_OSD_SET_GLOBAL_ALPHA, API_CACHE), + API_ENTRY(CX2341X_OSD_SET_BLEND_COORDS, API_CACHE), + API_ENTRY(CX2341X_OSD_GET_FLICKER_STATE, API_FAST_RESULT), + API_ENTRY(CX2341X_OSD_SET_FLICKER_STATE, API_CACHE), + API_ENTRY(CX2341X_OSD_BLT_COPY, API_RESULT), + API_ENTRY(CX2341X_OSD_BLT_FILL, API_RESULT), + API_ENTRY(CX2341X_OSD_BLT_TEXT, API_RESULT), + API_ENTRY(CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, API_CACHE), + API_ENTRY(CX2341X_OSD_SET_CHROMA_KEY, API_CACHE), + API_ENTRY(CX2341X_OSD_GET_ALPHA_CONTENT_INDEX, API_FAST_RESULT), + API_ENTRY(CX2341X_OSD_SET_ALPHA_CONTENT_INDEX, API_CACHE) +}; + +static int try_mailbox(struct ivtv *itv, struct ivtv_mailbox_data *mbdata, int mb) +{ + u32 flags = readl(&mbdata->mbox[mb].flags); + int is_free = flags == IVTV_MBOX_FREE || (flags & IVTV_MBOX_FIRMWARE_DONE); + + /* if the mailbox is free, then try to claim it */ + if (is_free && !test_and_set_bit(mb, &mbdata->busy)) { + write_sync(IVTV_MBOX_DRIVER_BUSY, &mbdata->mbox[mb].flags); + return 1; + } + return 0; +} + +/* Try to find a free mailbox. Note mailbox 0 is reserved for DMA and so is not + attempted here. */ +static int get_mailbox(struct ivtv *itv, struct ivtv_mailbox_data *mbdata, int flags) +{ + unsigned long then = jiffies; + int i, mb; + int max_mbox = mbdata->max_mbox; + int retries = 100; + + /* All slow commands use the same mailbox, serializing them and also + leaving the other mailbox free for simple fast commands. */ + if ((flags & API_FAST_RESULT) == API_RESULT) + max_mbox = 1; + + /* find free non-DMA mailbox */ + for (i = 0; i < retries; i++) { + for (mb = 1; mb <= max_mbox; mb++) + if (try_mailbox(itv, mbdata, mb)) + return mb; + + /* Sleep before a retry, if not atomic */ + if (!(flags & API_NO_WAIT_MB)) { + if (time_after(jiffies, + then + msecs_to_jiffies(10*retries))) + break; + ivtv_msleep_timeout(10, 0); + } + } + return -ENODEV; +} + +static void write_mailbox(volatile struct ivtv_mailbox __iomem *mbox, int cmd, int args, u32 data[]) +{ + int i; + + write_sync(cmd, &mbox->cmd); + write_sync(IVTV_API_STD_TIMEOUT, &mbox->timeout); + + for (i = 0; i < CX2341X_MBOX_MAX_DATA; i++) + write_sync(data[i], &mbox->data[i]); + + write_sync(IVTV_MBOX_DRIVER_DONE | IVTV_MBOX_DRIVER_BUSY, &mbox->flags); +} + +static void clear_all_mailboxes(struct ivtv *itv, struct ivtv_mailbox_data *mbdata) +{ + int i; + + for (i = 0; i <= mbdata->max_mbox; i++) { + IVTV_DEBUG_WARN("Clearing mailbox %d: cmd 0x%08x flags 0x%08x\n", + i, readl(&mbdata->mbox[i].cmd), readl(&mbdata->mbox[i].flags)); + write_sync(0, &mbdata->mbox[i].flags); + clear_bit(i, &mbdata->busy); + } +} + +static int ivtv_api_call(struct ivtv *itv, int cmd, int args, u32 data[]) +{ + struct ivtv_mailbox_data *mbdata = (cmd >= 128) ? &itv->enc_mbox : &itv->dec_mbox; + volatile struct ivtv_mailbox __iomem *mbox; + int api_timeout = msecs_to_jiffies(1000); + int flags, mb, i; + unsigned long then; + + /* sanity checks */ + if (NULL == mbdata) { + IVTV_ERR("No mailbox allocated\n"); + return -ENODEV; + } + if (args < 0 || args > CX2341X_MBOX_MAX_DATA || + cmd < 0 || cmd > 255 || api_info[cmd].name == NULL) { + IVTV_ERR("Invalid MB call: cmd = 0x%02x, args = %d\n", cmd, args); + return -EINVAL; + } + + if (api_info[cmd].flags & API_HIGH_VOL) { + IVTV_DEBUG_HI_MB("MB Call: %s\n", api_info[cmd].name); + } + else { + IVTV_DEBUG_MB("MB Call: %s\n", api_info[cmd].name); + } + + /* clear possibly uninitialized part of data array */ + for (i = args; i < CX2341X_MBOX_MAX_DATA; i++) + data[i] = 0; + + /* If this command was issued within the last 30 minutes and with identical + data, then just return 0 as there is no need to issue this command again. + Just an optimization to prevent unnecessary use of mailboxes. */ + if (itv->api_cache[cmd].last_jiffies && + time_before(jiffies, + itv->api_cache[cmd].last_jiffies + + msecs_to_jiffies(1800000)) && + !memcmp(data, itv->api_cache[cmd].data, sizeof(itv->api_cache[cmd].data))) { + itv->api_cache[cmd].last_jiffies = jiffies; + return 0; + } + + flags = api_info[cmd].flags; + + if (flags & API_DMA) { + for (i = 0; i < 100; i++) { + mb = i % (mbdata->max_mbox + 1); + if (try_mailbox(itv, mbdata, mb)) { + write_mailbox(&mbdata->mbox[mb], cmd, args, data); + clear_bit(mb, &mbdata->busy); + return 0; + } + IVTV_DEBUG_WARN("%s: mailbox %d not free %08x\n", + api_info[cmd].name, mb, readl(&mbdata->mbox[mb].flags)); + } + IVTV_WARN("Could not find free DMA mailbox for %s\n", api_info[cmd].name); + clear_all_mailboxes(itv, mbdata); + return -EBUSY; + } + + if ((flags & API_FAST_RESULT) == API_FAST_RESULT) + api_timeout = msecs_to_jiffies(100); + + mb = get_mailbox(itv, mbdata, flags); + if (mb < 0) { + IVTV_DEBUG_WARN("No free mailbox found (%s)\n", api_info[cmd].name); + clear_all_mailboxes(itv, mbdata); + return -EBUSY; + } + mbox = &mbdata->mbox[mb]; + write_mailbox(mbox, cmd, args, data); + if (flags & API_CACHE) { + memcpy(itv->api_cache[cmd].data, data, sizeof(itv->api_cache[cmd].data)); + itv->api_cache[cmd].last_jiffies = jiffies; + } + if ((flags & API_RESULT) == 0) { + clear_bit(mb, &mbdata->busy); + return 0; + } + + /* Get results */ + then = jiffies; + + if (!(flags & API_NO_POLL)) { + /* First try to poll, then switch to delays */ + for (i = 0; i < 100; i++) { + if (readl(&mbox->flags) & IVTV_MBOX_FIRMWARE_DONE) + break; + } + } + while (!(readl(&mbox->flags) & IVTV_MBOX_FIRMWARE_DONE)) { + if (time_after(jiffies, then + api_timeout)) { + IVTV_DEBUG_WARN("Could not get result (%s)\n", api_info[cmd].name); + /* reset the mailbox, but it is likely too late already */ + write_sync(0, &mbox->flags); + clear_bit(mb, &mbdata->busy); + return -EIO; + } + if (flags & API_NO_WAIT_RES) + mdelay(1); + else + ivtv_msleep_timeout(1, 0); + } + if (time_after(jiffies, then + msecs_to_jiffies(100))) + IVTV_DEBUG_WARN("%s took %u jiffies\n", + api_info[cmd].name, + jiffies_to_msecs(jiffies - then)); + + for (i = 0; i < CX2341X_MBOX_MAX_DATA; i++) + data[i] = readl(&mbox->data[i]); + write_sync(0, &mbox->flags); + clear_bit(mb, &mbdata->busy); + return 0; +} + +int ivtv_api(struct ivtv *itv, int cmd, int args, u32 data[]) +{ + int res = ivtv_api_call(itv, cmd, args, data); + + /* Allow a single retry, probably already too late though. + If there is no free mailbox then that is usually an indication + of a more serious problem. */ + return (res == -EBUSY) ? ivtv_api_call(itv, cmd, args, data) : res; +} + +int ivtv_api_func(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]) +{ + return ivtv_api(priv, cmd, in, data); +} + +int ivtv_vapi_result(struct ivtv *itv, u32 data[CX2341X_MBOX_MAX_DATA], int cmd, int args, ...) +{ + va_list ap; + int i; + + va_start(ap, args); + for (i = 0; i < args; i++) { + data[i] = va_arg(ap, u32); + } + va_end(ap); + return ivtv_api(itv, cmd, args, data); +} + +int ivtv_vapi(struct ivtv *itv, int cmd, int args, ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list ap; + int i; + + va_start(ap, args); + for (i = 0; i < args; i++) { + data[i] = va_arg(ap, u32); + } + va_end(ap); + return ivtv_api(itv, cmd, args, data); +} + +/* This one is for stuff that can't sleep.. irq handlers, etc.. */ +void ivtv_api_get_data(struct ivtv_mailbox_data *mbdata, int mb, + int argc, u32 data[]) +{ + volatile u32 __iomem *p = mbdata->mbox[mb].data; + int i; + for (i = 0; i < argc; i++, p++) + data[i] = readl(p); +} + +/* Wipe api cache */ +void ivtv_mailbox_cache_invalidate(struct ivtv *itv) +{ + int i; + for (i = 0; i < 256; i++) + itv->api_cache[i].last_jiffies = 0; +} diff --git a/drivers/media/pci/ivtv/ivtv-mailbox.h b/drivers/media/pci/ivtv/ivtv-mailbox.h new file mode 100644 index 00000000..2c834d2c --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-mailbox.h @@ -0,0 +1,35 @@ +/* + mailbox functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_MAILBOX_H +#define IVTV_MAILBOX_H + +#define IVTV_MBOX_DMA_END 8 +#define IVTV_MBOX_DMA 9 + +void ivtv_api_get_data(struct ivtv_mailbox_data *mbdata, int mb, + int argc, u32 data[]); +int ivtv_api(struct ivtv *itv, int cmd, int args, u32 data[]); +int ivtv_vapi_result(struct ivtv *itv, u32 data[CX2341X_MBOX_MAX_DATA], int cmd, int args, ...); +int ivtv_vapi(struct ivtv *itv, int cmd, int args, ...); +int ivtv_api_func(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]); +void ivtv_mailbox_cache_invalidate(struct ivtv *itv); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-queue.c b/drivers/media/pci/ivtv/ivtv-queue.c new file mode 100644 index 00000000..7fde36e6 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-queue.c @@ -0,0 +1,297 @@ +/* + buffer queues. + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-queue.h" + +int ivtv_buf_copy_from_user(struct ivtv_stream *s, struct ivtv_buffer *buf, const char __user *src, int copybytes) +{ + if (s->buf_size - buf->bytesused < copybytes) + copybytes = s->buf_size - buf->bytesused; + if (copy_from_user(buf->buf + buf->bytesused, src, copybytes)) { + return -EFAULT; + } + buf->bytesused += copybytes; + return copybytes; +} + +void ivtv_buf_swap(struct ivtv_buffer *buf) +{ + int i; + + for (i = 0; i < buf->bytesused; i += 4) + swab32s((u32 *)(buf->buf + i)); +} + +void ivtv_queue_init(struct ivtv_queue *q) +{ + INIT_LIST_HEAD(&q->list); + q->buffers = 0; + q->length = 0; + q->bytesused = 0; +} + +void ivtv_enqueue(struct ivtv_stream *s, struct ivtv_buffer *buf, struct ivtv_queue *q) +{ + unsigned long flags; + + /* clear the buffer if it is going to be enqueued to the free queue */ + if (q == &s->q_free) { + buf->bytesused = 0; + buf->readpos = 0; + buf->b_flags = 0; + buf->dma_xfer_cnt = 0; + } + spin_lock_irqsave(&s->qlock, flags); + list_add_tail(&buf->list, &q->list); + q->buffers++; + q->length += s->buf_size; + q->bytesused += buf->bytesused - buf->readpos; + spin_unlock_irqrestore(&s->qlock, flags); +} + +struct ivtv_buffer *ivtv_dequeue(struct ivtv_stream *s, struct ivtv_queue *q) +{ + struct ivtv_buffer *buf = NULL; + unsigned long flags; + + spin_lock_irqsave(&s->qlock, flags); + if (!list_empty(&q->list)) { + buf = list_entry(q->list.next, struct ivtv_buffer, list); + list_del_init(q->list.next); + q->buffers--; + q->length -= s->buf_size; + q->bytesused -= buf->bytesused - buf->readpos; + } + spin_unlock_irqrestore(&s->qlock, flags); + return buf; +} + +static void ivtv_queue_move_buf(struct ivtv_stream *s, struct ivtv_queue *from, + struct ivtv_queue *to, int clear) +{ + struct ivtv_buffer *buf = list_entry(from->list.next, struct ivtv_buffer, list); + + list_move_tail(from->list.next, &to->list); + from->buffers--; + from->length -= s->buf_size; + from->bytesused -= buf->bytesused - buf->readpos; + /* special handling for q_free */ + if (clear) + buf->bytesused = buf->readpos = buf->b_flags = buf->dma_xfer_cnt = 0; + to->buffers++; + to->length += s->buf_size; + to->bytesused += buf->bytesused - buf->readpos; +} + +/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'. + If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'. + If 'steal' != NULL, then buffers may also taken from that queue if + needed, but only if 'from' is the free queue. + + The buffer is automatically cleared if it goes to the free queue. It is + also cleared if buffers need to be taken from the 'steal' queue and + the 'from' queue is the free queue. + + When 'from' is q_free, then needed_bytes is compared to the total + available buffer length, otherwise needed_bytes is compared to the + bytesused value. For the 'steal' queue the total available buffer + length is always used. + + -ENOMEM is returned if the buffers could not be obtained, 0 if all + buffers where obtained from the 'from' list and if non-zero then + the number of stolen buffers is returned. */ +int ivtv_queue_move(struct ivtv_stream *s, struct ivtv_queue *from, struct ivtv_queue *steal, + struct ivtv_queue *to, int needed_bytes) +{ + unsigned long flags; + int rc = 0; + int from_free = from == &s->q_free; + int to_free = to == &s->q_free; + int bytes_available, bytes_steal; + + spin_lock_irqsave(&s->qlock, flags); + if (needed_bytes == 0) { + from_free = 1; + needed_bytes = from->length; + } + + bytes_available = from_free ? from->length : from->bytesused; + bytes_steal = (from_free && steal) ? steal->length : 0; + + if (bytes_available + bytes_steal < needed_bytes) { + spin_unlock_irqrestore(&s->qlock, flags); + return -ENOMEM; + } + while (bytes_available < needed_bytes) { + struct ivtv_buffer *buf = list_entry(steal->list.prev, struct ivtv_buffer, list); + u16 dma_xfer_cnt = buf->dma_xfer_cnt; + + /* move buffers from the tail of the 'steal' queue to the tail of the + 'from' queue. Always copy all the buffers with the same dma_xfer_cnt + value, this ensures that you do not end up with partial frame data + if one frame is stored in multiple buffers. */ + while (dma_xfer_cnt == buf->dma_xfer_cnt) { + list_move_tail(steal->list.prev, &from->list); + rc++; + steal->buffers--; + steal->length -= s->buf_size; + steal->bytesused -= buf->bytesused - buf->readpos; + buf->bytesused = buf->readpos = buf->b_flags = buf->dma_xfer_cnt = 0; + from->buffers++; + from->length += s->buf_size; + bytes_available += s->buf_size; + if (list_empty(&steal->list)) + break; + buf = list_entry(steal->list.prev, struct ivtv_buffer, list); + } + } + if (from_free) { + u32 old_length = to->length; + + while (to->length - old_length < needed_bytes) { + ivtv_queue_move_buf(s, from, to, 1); + } + } + else { + u32 old_bytesused = to->bytesused; + + while (to->bytesused - old_bytesused < needed_bytes) { + ivtv_queue_move_buf(s, from, to, to_free); + } + } + spin_unlock_irqrestore(&s->qlock, flags); + return rc; +} + +void ivtv_flush_queues(struct ivtv_stream *s) +{ + ivtv_queue_move(s, &s->q_io, NULL, &s->q_free, 0); + ivtv_queue_move(s, &s->q_full, NULL, &s->q_free, 0); + ivtv_queue_move(s, &s->q_dma, NULL, &s->q_free, 0); + ivtv_queue_move(s, &s->q_predma, NULL, &s->q_free, 0); +} + +int ivtv_stream_alloc(struct ivtv_stream *s) +{ + struct ivtv *itv = s->itv; + int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers; + int i; + + if (s->buffers == 0) + return 0; + + IVTV_DEBUG_INFO("Allocate %s%s stream: %d x %d buffers (%dkB total)\n", + s->dma != PCI_DMA_NONE ? "DMA " : "", + s->name, s->buffers, s->buf_size, s->buffers * s->buf_size / 1024); + + s->sg_pending = kzalloc(SGsize, GFP_KERNEL|__GFP_NOWARN); + if (s->sg_pending == NULL) { + IVTV_ERR("Could not allocate sg_pending for %s stream\n", s->name); + return -ENOMEM; + } + s->sg_pending_size = 0; + + s->sg_processing = kzalloc(SGsize, GFP_KERNEL|__GFP_NOWARN); + if (s->sg_processing == NULL) { + IVTV_ERR("Could not allocate sg_processing for %s stream\n", s->name); + kfree(s->sg_pending); + s->sg_pending = NULL; + return -ENOMEM; + } + s->sg_processing_size = 0; + + s->sg_dma = kzalloc(sizeof(struct ivtv_sg_element), + GFP_KERNEL|__GFP_NOWARN); + if (s->sg_dma == NULL) { + IVTV_ERR("Could not allocate sg_dma for %s stream\n", s->name); + kfree(s->sg_pending); + s->sg_pending = NULL; + kfree(s->sg_processing); + s->sg_processing = NULL; + return -ENOMEM; + } + if (ivtv_might_use_dma(s)) { + s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, + sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE); + ivtv_stream_sync_for_cpu(s); + } + + /* allocate stream buffers. Initially all buffers are in q_free. */ + for (i = 0; i < s->buffers; i++) { + struct ivtv_buffer *buf = kzalloc(sizeof(struct ivtv_buffer), + GFP_KERNEL|__GFP_NOWARN); + + if (buf == NULL) + break; + buf->buf = kmalloc(s->buf_size + 256, GFP_KERNEL|__GFP_NOWARN); + if (buf->buf == NULL) { + kfree(buf); + break; + } + INIT_LIST_HEAD(&buf->list); + if (ivtv_might_use_dma(s)) { + buf->dma_handle = pci_map_single(s->itv->pdev, + buf->buf, s->buf_size + 256, s->dma); + ivtv_buf_sync_for_cpu(s, buf); + } + ivtv_enqueue(s, buf, &s->q_free); + } + if (i == s->buffers) + return 0; + IVTV_ERR("Couldn't allocate buffers for %s stream\n", s->name); + ivtv_stream_free(s); + return -ENOMEM; +} + +void ivtv_stream_free(struct ivtv_stream *s) +{ + struct ivtv_buffer *buf; + + /* move all buffers to q_free */ + ivtv_flush_queues(s); + + /* empty q_free */ + while ((buf = ivtv_dequeue(s, &s->q_free))) { + if (ivtv_might_use_dma(s)) + pci_unmap_single(s->itv->pdev, buf->dma_handle, + s->buf_size + 256, s->dma); + kfree(buf->buf); + kfree(buf); + } + + /* Free SG Array/Lists */ + if (s->sg_dma != NULL) { + if (s->sg_handle != IVTV_DMA_UNMAPPED) { + pci_unmap_single(s->itv->pdev, s->sg_handle, + sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE); + s->sg_handle = IVTV_DMA_UNMAPPED; + } + kfree(s->sg_pending); + kfree(s->sg_processing); + kfree(s->sg_dma); + s->sg_pending = NULL; + s->sg_processing = NULL; + s->sg_dma = NULL; + s->sg_pending_size = 0; + s->sg_processing_size = 0; + } +} diff --git a/drivers/media/pci/ivtv/ivtv-queue.h b/drivers/media/pci/ivtv/ivtv-queue.h new file mode 100644 index 00000000..91233839 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-queue.h @@ -0,0 +1,96 @@ +/* + buffer queues. + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_QUEUE_H +#define IVTV_QUEUE_H + +#define IVTV_DMA_UNMAPPED ((u32) -1) +#define SLICED_VBI_PIO 0 + +/* ivtv_buffer utility functions */ + +static inline int ivtv_might_use_pio(struct ivtv_stream *s) +{ + return s->dma == PCI_DMA_NONE || (SLICED_VBI_PIO && s->type == IVTV_ENC_STREAM_TYPE_VBI); +} + +static inline int ivtv_use_pio(struct ivtv_stream *s) +{ + struct ivtv *itv = s->itv; + + return s->dma == PCI_DMA_NONE || + (SLICED_VBI_PIO && s->type == IVTV_ENC_STREAM_TYPE_VBI && itv->vbi.sliced_in->service_set); +} + +static inline int ivtv_might_use_dma(struct ivtv_stream *s) +{ + return s->dma != PCI_DMA_NONE; +} + +static inline int ivtv_use_dma(struct ivtv_stream *s) +{ + return !ivtv_use_pio(s); +} + +static inline void ivtv_buf_sync_for_cpu(struct ivtv_stream *s, struct ivtv_buffer *buf) +{ + if (ivtv_use_dma(s)) + pci_dma_sync_single_for_cpu(s->itv->pdev, buf->dma_handle, + s->buf_size + 256, s->dma); +} + +static inline void ivtv_buf_sync_for_device(struct ivtv_stream *s, struct ivtv_buffer *buf) +{ + if (ivtv_use_dma(s)) + pci_dma_sync_single_for_device(s->itv->pdev, buf->dma_handle, + s->buf_size + 256, s->dma); +} + +int ivtv_buf_copy_from_user(struct ivtv_stream *s, struct ivtv_buffer *buf, const char __user *src, int copybytes); +void ivtv_buf_swap(struct ivtv_buffer *buf); + +/* ivtv_queue utility functions */ +void ivtv_queue_init(struct ivtv_queue *q); +void ivtv_enqueue(struct ivtv_stream *s, struct ivtv_buffer *buf, struct ivtv_queue *q); +struct ivtv_buffer *ivtv_dequeue(struct ivtv_stream *s, struct ivtv_queue *q); +int ivtv_queue_move(struct ivtv_stream *s, struct ivtv_queue *from, struct ivtv_queue *steal, + struct ivtv_queue *to, int needed_bytes); +void ivtv_flush_queues(struct ivtv_stream *s); + +/* ivtv_stream utility functions */ +int ivtv_stream_alloc(struct ivtv_stream *s); +void ivtv_stream_free(struct ivtv_stream *s); + +static inline void ivtv_stream_sync_for_cpu(struct ivtv_stream *s) +{ + if (ivtv_use_dma(s)) + pci_dma_sync_single_for_cpu(s->itv->pdev, s->sg_handle, + sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE); +} + +static inline void ivtv_stream_sync_for_device(struct ivtv_stream *s) +{ + if (ivtv_use_dma(s)) + pci_dma_sync_single_for_device(s->itv->pdev, s->sg_handle, + sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE); +} + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-routing.c b/drivers/media/pci/ivtv/ivtv-routing.c new file mode 100644 index 00000000..8898c569 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-routing.c @@ -0,0 +1,119 @@ +/* + Audio/video-routing-related ivtv functions. + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-i2c.h" +#include "ivtv-cards.h" +#include "ivtv-gpio.h" +#include "ivtv-routing.h" + +#include +#include +#include +#include + +/* Selects the audio input and output according to the current + settings. */ +void ivtv_audio_set_io(struct ivtv *itv) +{ + const struct ivtv_card_audio_input *in; + u32 input, output = 0; + + /* Determine which input to use */ + if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) + in = &itv->card->radio_input; + else + in = &itv->card->audio_inputs[itv->audio_input]; + + /* handle muxer chips */ + input = in->muxer_input; + if (itv->card->hw_muxer & IVTV_HW_M52790) + output = M52790_OUT_STEREO; + v4l2_subdev_call(itv->sd_muxer, audio, s_routing, + input, output, 0); + + input = in->audio_input; + output = 0; + if (itv->card->hw_audio & IVTV_HW_MSP34XX) + output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1); + ivtv_call_hw(itv, itv->card->hw_audio, audio, s_routing, + input, output, 0); +} + +/* Selects the video input and output according to the current + settings. */ +void ivtv_video_set_io(struct ivtv *itv) +{ + int inp = itv->active_input; + u32 input; + u32 type; + + v4l2_subdev_call(itv->sd_video, video, s_routing, + itv->card->video_inputs[inp].video_input, 0, 0); + + type = itv->card->video_inputs[inp].video_type; + + if (type == IVTV_CARD_INPUT_VID_TUNER) { + input = 0; /* Tuner */ + } else if (type < IVTV_CARD_INPUT_COMPOSITE1) { + input = 2; /* S-Video */ + } else { + input = 1; /* Composite */ + } + + if (itv->card->hw_video & IVTV_HW_GPIO) + ivtv_call_hw(itv, IVTV_HW_GPIO, video, s_routing, + input, 0, 0); + + if (itv->card->hw_video & IVTV_HW_UPD64031A) { + if (type == IVTV_CARD_INPUT_VID_TUNER || + type >= IVTV_CARD_INPUT_COMPOSITE1) { + /* Composite: GR on, connect to 3DYCS */ + input = UPD64031A_GR_ON | UPD64031A_3DYCS_COMPOSITE; + } else { + /* S-Video: GR bypassed, turn it off */ + input = UPD64031A_GR_OFF | UPD64031A_3DYCS_DISABLE; + } + input |= itv->card->gr_config; + + ivtv_call_hw(itv, IVTV_HW_UPD64031A, video, s_routing, + input, 0, 0); + } + + if (itv->card->hw_video & IVTV_HW_UPD6408X) { + input = UPD64083_YCS_MODE; + if (type > IVTV_CARD_INPUT_VID_TUNER && + type < IVTV_CARD_INPUT_COMPOSITE1) { + /* S-Video uses YCNR mode and internal Y-ADC, the + upd64031a is not used. */ + input |= UPD64083_YCNR_MODE; + } + else if (itv->card->hw_video & IVTV_HW_UPD64031A) { + /* Use upd64031a output for tuner and + composite(CX23416GYC only) inputs */ + if (type == IVTV_CARD_INPUT_VID_TUNER || + itv->card->type == IVTV_CARD_CX23416GYC) { + input |= UPD64083_EXT_Y_ADC; + } + } + ivtv_call_hw(itv, IVTV_HW_UPD6408X, video, s_routing, + input, 0, 0); + } +} diff --git a/drivers/media/pci/ivtv/ivtv-routing.h b/drivers/media/pci/ivtv/ivtv-routing.h new file mode 100644 index 00000000..c72a9731 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-routing.h @@ -0,0 +1,27 @@ +/* + Audio/video-routing-related ivtv functions. + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_ROUTING_H +#define IVTV_ROUTING_H + +void ivtv_audio_set_io(struct ivtv *itv); +void ivtv_video_set_io(struct ivtv *itv); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-streams.c b/drivers/media/pci/ivtv/ivtv-streams.c new file mode 100644 index 00000000..70dad588 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-streams.c @@ -0,0 +1,1039 @@ +/* + init/start/stop/exit stream functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* License: GPL + * Author: Kevin Thayer + * + * This file will hold API related functions, both internal (firmware api) + * and external (v4l2, etc) + * + * ----- + * MPG600/MPG160 support by T.Adachi + * and Takeru KOMORIYA + * + * AVerMedia M179 GPIO info by Chris Pinkham + * using information provided by Jiun-Kuei Jung @ AVerMedia. + */ + +#include "ivtv-driver.h" +#include "ivtv-fileops.h" +#include "ivtv-queue.h" +#include "ivtv-mailbox.h" +#include "ivtv-ioctl.h" +#include "ivtv-irq.h" +#include "ivtv-yuv.h" +#include "ivtv-cards.h" +#include "ivtv-streams.h" +#include "ivtv-firmware.h" +#include + +static const struct v4l2_file_operations ivtv_v4l2_enc_fops = { + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .unlocked_ioctl = video_ioctl2, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_enc_poll, +}; + +static const struct v4l2_file_operations ivtv_v4l2_dec_fops = { + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .unlocked_ioctl = video_ioctl2, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_dec_poll, +}; + +static const struct v4l2_file_operations ivtv_v4l2_radio_fops = { + .owner = THIS_MODULE, + .open = ivtv_v4l2_open, + .unlocked_ioctl = video_ioctl2, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_enc_poll, +}; + +#define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */ +#define IVTV_V4L2_ENC_PCM_OFFSET 24 /* offset from 0 to register pcm v4l2 minors on */ +#define IVTV_V4L2_ENC_YUV_OFFSET 32 /* offset from 0 to register yuv v4l2 minors on */ +#define IVTV_V4L2_DEC_YUV_OFFSET 48 /* offset from 0 to register decoder yuv v4l2 minors on */ +#define IVTV_V4L2_DEC_VBI_OFFSET 8 /* offset from 0 to register decoder vbi input v4l2 minors on */ +#define IVTV_V4L2_DEC_VOUT_OFFSET 16 /* offset from 0 to register vbi output v4l2 minors on */ + +static struct { + const char *name; + int vfl_type; + int num_offset; + int dma, pio; + u32 v4l2_caps; + const struct v4l2_file_operations *fops; +} ivtv_stream_info[] = { + { /* IVTV_ENC_STREAM_TYPE_MPG */ + "encoder MPG", + VFL_TYPE_GRABBER, 0, + PCI_DMA_FROMDEVICE, 0, + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, + &ivtv_v4l2_enc_fops + }, + { /* IVTV_ENC_STREAM_TYPE_YUV */ + "encoder YUV", + VFL_TYPE_GRABBER, IVTV_V4L2_ENC_YUV_OFFSET, + PCI_DMA_FROMDEVICE, 0, + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, + &ivtv_v4l2_enc_fops + }, + { /* IVTV_ENC_STREAM_TYPE_VBI */ + "encoder VBI", + VFL_TYPE_VBI, 0, + PCI_DMA_FROMDEVICE, 0, + V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, + &ivtv_v4l2_enc_fops + }, + { /* IVTV_ENC_STREAM_TYPE_PCM */ + "encoder PCM", + VFL_TYPE_GRABBER, IVTV_V4L2_ENC_PCM_OFFSET, + PCI_DMA_FROMDEVICE, 0, + V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, + &ivtv_v4l2_enc_fops + }, + { /* IVTV_ENC_STREAM_TYPE_RAD */ + "encoder radio", + VFL_TYPE_RADIO, 0, + PCI_DMA_NONE, 1, + V4L2_CAP_RADIO | V4L2_CAP_TUNER, + &ivtv_v4l2_radio_fops + }, + { /* IVTV_DEC_STREAM_TYPE_MPG */ + "decoder MPG", + VFL_TYPE_GRABBER, IVTV_V4L2_DEC_MPG_OFFSET, + PCI_DMA_TODEVICE, 0, + V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, + &ivtv_v4l2_dec_fops + }, + { /* IVTV_DEC_STREAM_TYPE_VBI */ + "decoder VBI", + VFL_TYPE_VBI, IVTV_V4L2_DEC_VBI_OFFSET, + PCI_DMA_NONE, 1, + V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_READWRITE, + &ivtv_v4l2_enc_fops + }, + { /* IVTV_DEC_STREAM_TYPE_VOUT */ + "decoder VOUT", + VFL_TYPE_VBI, IVTV_V4L2_DEC_VOUT_OFFSET, + PCI_DMA_NONE, 1, + V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, + &ivtv_v4l2_dec_fops + }, + { /* IVTV_DEC_STREAM_TYPE_YUV */ + "decoder YUV", + VFL_TYPE_GRABBER, IVTV_V4L2_DEC_YUV_OFFSET, + PCI_DMA_TODEVICE, 0, + V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, + &ivtv_v4l2_dec_fops + } +}; + +static void ivtv_stream_init(struct ivtv *itv, int type) +{ + struct ivtv_stream *s = &itv->streams[type]; + struct video_device *vdev = s->vdev; + + /* we need to keep vdev, so restore it afterwards */ + memset(s, 0, sizeof(*s)); + s->vdev = vdev; + + /* initialize ivtv_stream fields */ + s->itv = itv; + s->type = type; + s->name = ivtv_stream_info[type].name; + s->caps = ivtv_stream_info[type].v4l2_caps; + + if (ivtv_stream_info[type].pio) + s->dma = PCI_DMA_NONE; + else + s->dma = ivtv_stream_info[type].dma; + s->buf_size = itv->stream_buf_size[type]; + if (s->buf_size) + s->buffers = (itv->options.kilobytes[type] * 1024 + s->buf_size - 1) / s->buf_size; + spin_lock_init(&s->qlock); + init_waitqueue_head(&s->waitq); + s->sg_handle = IVTV_DMA_UNMAPPED; + ivtv_queue_init(&s->q_free); + ivtv_queue_init(&s->q_full); + ivtv_queue_init(&s->q_dma); + ivtv_queue_init(&s->q_predma); + ivtv_queue_init(&s->q_io); +} + +static int ivtv_prep_dev(struct ivtv *itv, int type) +{ + struct ivtv_stream *s = &itv->streams[type]; + int num_offset = ivtv_stream_info[type].num_offset; + int num = itv->instance + ivtv_first_minor + num_offset; + + /* These four fields are always initialized. If vdev == NULL, then + this stream is not in use. In that case no other fields but these + four can be used. */ + s->vdev = NULL; + s->itv = itv; + s->type = type; + s->name = ivtv_stream_info[type].name; + + /* Check whether the radio is supported */ + if (type == IVTV_ENC_STREAM_TYPE_RAD && !(itv->v4l2_cap & V4L2_CAP_RADIO)) + return 0; + if (type >= IVTV_DEC_STREAM_TYPE_MPG && !(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return 0; + + /* User explicitly selected 0 buffers for these streams, so don't + create them. */ + if (ivtv_stream_info[type].dma != PCI_DMA_NONE && + itv->options.kilobytes[type] == 0) { + IVTV_INFO("Disabled %s device\n", ivtv_stream_info[type].name); + return 0; + } + + ivtv_stream_init(itv, type); + + /* allocate and initialize the v4l2 video device structure */ + s->vdev = video_device_alloc(); + if (s->vdev == NULL) { + IVTV_ERR("Couldn't allocate v4l2 video_device for %s\n", s->name); + return -ENOMEM; + } + + snprintf(s->vdev->name, sizeof(s->vdev->name), "%s %s", + itv->v4l2_dev.name, s->name); + + s->vdev->num = num; + s->vdev->v4l2_dev = &itv->v4l2_dev; + if (ivtv_stream_info[type].v4l2_caps & + (V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_SLICED_VBI_OUTPUT)) + s->vdev->vfl_dir = VFL_DIR_TX; + s->vdev->fops = ivtv_stream_info[type].fops; + s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler; + s->vdev->release = video_device_release; + s->vdev->tvnorms = V4L2_STD_ALL; + s->vdev->lock = &itv->serialize_lock; + if (s->type == IVTV_DEC_STREAM_TYPE_VBI) { + v4l2_disable_ioctl(s->vdev, VIDIOC_S_AUDIO); + v4l2_disable_ioctl(s->vdev, VIDIOC_G_AUDIO); + v4l2_disable_ioctl(s->vdev, VIDIOC_ENUMAUDIO); + v4l2_disable_ioctl(s->vdev, VIDIOC_ENUMINPUT); + v4l2_disable_ioctl(s->vdev, VIDIOC_S_INPUT); + v4l2_disable_ioctl(s->vdev, VIDIOC_G_INPUT); + v4l2_disable_ioctl(s->vdev, VIDIOC_S_FREQUENCY); + v4l2_disable_ioctl(s->vdev, VIDIOC_G_FREQUENCY); + v4l2_disable_ioctl(s->vdev, VIDIOC_S_TUNER); + v4l2_disable_ioctl(s->vdev, VIDIOC_G_TUNER); + v4l2_disable_ioctl(s->vdev, VIDIOC_S_STD); + } + set_bit(V4L2_FL_USE_FH_PRIO, &s->vdev->flags); + ivtv_set_funcs(s->vdev); + return 0; +} + +/* Initialize v4l2 variables and prepare v4l2 devices */ +int ivtv_streams_setup(struct ivtv *itv) +{ + int type; + + /* Setup V4L2 Devices */ + for (type = 0; type < IVTV_MAX_STREAMS; type++) { + /* Prepare device */ + if (ivtv_prep_dev(itv, type)) + break; + + if (itv->streams[type].vdev == NULL) + continue; + + /* Allocate Stream */ + if (ivtv_stream_alloc(&itv->streams[type])) + break; + } + if (type == IVTV_MAX_STREAMS) + return 0; + + /* One or more streams could not be initialized. Clean 'em all up. */ + ivtv_streams_cleanup(itv, 0); + return -ENOMEM; +} + +static int ivtv_reg_dev(struct ivtv *itv, int type) +{ + struct ivtv_stream *s = &itv->streams[type]; + int vfl_type = ivtv_stream_info[type].vfl_type; + const char *name; + int num; + + if (s->vdev == NULL) + return 0; + + num = s->vdev->num; + /* card number + user defined offset + device offset */ + if (type != IVTV_ENC_STREAM_TYPE_MPG) { + struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG]; + + if (s_mpg->vdev) + num = s_mpg->vdev->num + ivtv_stream_info[type].num_offset; + } + video_set_drvdata(s->vdev, s); + + /* Register device. First try the desired minor, then any free one. */ + if (video_register_device_no_warn(s->vdev, vfl_type, num)) { + IVTV_ERR("Couldn't register v4l2 device for %s (device node number %d)\n", + s->name, num); + video_device_release(s->vdev); + s->vdev = NULL; + return -ENOMEM; + } + name = video_device_node_name(s->vdev); + + switch (vfl_type) { + case VFL_TYPE_GRABBER: + IVTV_INFO("Registered device %s for %s (%d kB)\n", + name, s->name, itv->options.kilobytes[type]); + break; + case VFL_TYPE_RADIO: + IVTV_INFO("Registered device %s for %s\n", + name, s->name); + break; + case VFL_TYPE_VBI: + if (itv->options.kilobytes[type]) + IVTV_INFO("Registered device %s for %s (%d kB)\n", + name, s->name, itv->options.kilobytes[type]); + else + IVTV_INFO("Registered device %s for %s\n", + name, s->name); + break; + } + return 0; +} + +/* Register v4l2 devices */ +int ivtv_streams_register(struct ivtv *itv) +{ + int type; + int err = 0; + + /* Register V4L2 devices */ + for (type = 0; type < IVTV_MAX_STREAMS; type++) + err |= ivtv_reg_dev(itv, type); + + if (err == 0) + return 0; + + /* One or more streams could not be initialized. Clean 'em all up. */ + ivtv_streams_cleanup(itv, 1); + return -ENOMEM; +} + +/* Unregister v4l2 devices */ +void ivtv_streams_cleanup(struct ivtv *itv, int unregister) +{ + int type; + + /* Teardown all streams */ + for (type = 0; type < IVTV_MAX_STREAMS; type++) { + struct video_device *vdev = itv->streams[type].vdev; + + itv->streams[type].vdev = NULL; + if (vdev == NULL) + continue; + + ivtv_stream_free(&itv->streams[type]); + /* Unregister or release device */ + if (unregister) + video_unregister_device(vdev); + else + video_device_release(vdev); + } +} + +static void ivtv_vbi_setup(struct ivtv *itv) +{ + int raw = ivtv_raw_vbi(itv); + u32 data[CX2341X_MBOX_MAX_DATA]; + int lines; + int i; + + /* Reset VBI */ + ivtv_vapi(itv, CX2341X_ENC_SET_VBI_LINE, 5, 0xffff , 0, 0, 0, 0); + + /* setup VBI registers */ + if (raw) + v4l2_subdev_call(itv->sd_video, vbi, s_raw_fmt, &itv->vbi.in.fmt.vbi); + else + v4l2_subdev_call(itv->sd_video, vbi, s_sliced_fmt, &itv->vbi.in.fmt.sliced); + + /* determine number of lines and total number of VBI bytes. + A raw line takes 1443 bytes: 2 * 720 + 4 byte frame header - 1 + The '- 1' byte is probably an unused U or V byte. Or something... + A sliced line takes 51 bytes: 4 byte frame header, 4 byte internal + header, 42 data bytes + checksum (to be confirmed) */ + if (raw) { + lines = itv->vbi.count * 2; + } else { + lines = itv->is_60hz ? 24 : 38; + if (itv->is_60hz && (itv->hw_flags & IVTV_HW_CX25840)) + lines += 2; + } + + itv->vbi.enc_size = lines * (raw ? itv->vbi.raw_size : itv->vbi.sliced_size); + + /* Note: sliced vs raw flag doesn't seem to have any effect + TODO: check mode (0x02) value with older ivtv versions. */ + data[0] = raw | 0x02 | (0xbd << 8); + + /* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */ + data[1] = 1; + /* The VBI frames are stored in a ringbuffer with this size (with a VBI frame as unit) */ + data[2] = raw ? 4 : 4 * (itv->vbi.raw_size / itv->vbi.enc_size); + /* The start/stop codes determine which VBI lines end up in the raw VBI data area. + The codes are from table 24 in the saa7115 datasheet. Each raw/sliced/video line + is framed with codes FF0000XX where XX is the SAV/EAV (Start/End of Active Video) + code. These values for raw VBI are obtained from a driver disassembly. The sliced + start/stop codes was deduced from this, but they do not appear in the driver. + Other code pairs that I found are: 0x250E6249/0x13545454 and 0x25256262/0x38137F54. + However, I have no idea what these values are for. */ + if (itv->hw_flags & IVTV_HW_CX25840) { + /* Setup VBI for the cx25840 digitizer */ + if (raw) { + data[3] = 0x20602060; + data[4] = 0x30703070; + } else { + data[3] = 0xB0F0B0F0; + data[4] = 0xA0E0A0E0; + } + /* Lines per frame */ + data[5] = lines; + /* bytes per line */ + data[6] = (raw ? itv->vbi.raw_size : itv->vbi.sliced_size); + } else { + /* Setup VBI for the saa7115 digitizer */ + if (raw) { + data[3] = 0x25256262; + data[4] = 0x387F7F7F; + } else { + data[3] = 0xABABECEC; + data[4] = 0xB6F1F1F1; + } + /* Lines per frame */ + data[5] = lines; + /* bytes per line */ + data[6] = itv->vbi.enc_size / lines; + } + + IVTV_DEBUG_INFO( + "Setup VBI API header 0x%08x pkts %d buffs %d ln %d sz %d\n", + data[0], data[1], data[2], data[5], data[6]); + + ivtv_api(itv, CX2341X_ENC_SET_VBI_CONFIG, 7, data); + + /* returns the VBI encoder memory area. */ + itv->vbi.enc_start = data[2]; + itv->vbi.fpi = data[0]; + if (!itv->vbi.fpi) + itv->vbi.fpi = 1; + + IVTV_DEBUG_INFO("Setup VBI start 0x%08x frames %d fpi %d\n", + itv->vbi.enc_start, data[1], itv->vbi.fpi); + + /* select VBI lines. + Note that the sliced argument seems to have no effect. */ + for (i = 2; i <= 24; i++) { + int valid; + + if (itv->is_60hz) { + valid = i >= 10 && i < 22; + } else { + valid = i >= 6 && i < 24; + } + ivtv_vapi(itv, CX2341X_ENC_SET_VBI_LINE, 5, i - 1, + valid, 0 , 0, 0); + ivtv_vapi(itv, CX2341X_ENC_SET_VBI_LINE, 5, (i - 1) | 0x80000000, + valid, 0, 0, 0); + } + + /* Remaining VBI questions: + - Is it possible to select particular VBI lines only for inclusion in the MPEG + stream? Currently you can only get the first X lines. + - Is mixed raw and sliced VBI possible? + - What's the meaning of the raw/sliced flag? + - What's the meaning of params 2, 3 & 4 of the Select VBI command? */ +} + +int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + struct ivtv *itv = s->itv; + int captype = 0, subtype = 0; + int enable_passthrough = 0; + + if (s->vdev == NULL) + return -EINVAL; + + IVTV_DEBUG_INFO("Start encoder stream %s\n", s->name); + + switch (s->type) { + case IVTV_ENC_STREAM_TYPE_MPG: + captype = 0; + subtype = 3; + + /* Stop Passthrough */ + if (itv->output_mode == OUT_PASSTHROUGH) { + ivtv_passthrough_mode(itv, 0); + enable_passthrough = 1; + } + itv->mpg_data_received = itv->vbi_data_inserted = 0; + itv->dualwatch_jiffies = jiffies; + itv->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(itv->cxhdl.audio_mode); + itv->search_pack_header = 0; + break; + + case IVTV_ENC_STREAM_TYPE_YUV: + if (itv->output_mode == OUT_PASSTHROUGH) { + captype = 2; + subtype = 11; /* video+audio+decoder */ + break; + } + captype = 1; + subtype = 1; + break; + case IVTV_ENC_STREAM_TYPE_PCM: + captype = 1; + subtype = 2; + break; + case IVTV_ENC_STREAM_TYPE_VBI: + captype = 1; + subtype = 4; + + itv->vbi.frame = 0; + itv->vbi.inserted_frame = 0; + memset(itv->vbi.sliced_mpeg_size, + 0, sizeof(itv->vbi.sliced_mpeg_size)); + break; + default: + return -EINVAL; + } + s->subtype = subtype; + s->buffers_stolen = 0; + + /* Clear Streamoff flags in case left from last capture */ + clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags); + + if (atomic_read(&itv->capturing) == 0) { + int digitizer; + + /* Always use frame based mode. Experiments have demonstrated that byte + stream based mode results in dropped frames and corruption. Not often, + but occasionally. Many thanks go to Leonard Orb who spent a lot of + effort and time trying to trace the cause of the drop outs. */ + /* 1 frame per DMA */ + /*ivtv_vapi(itv, CX2341X_ENC_SET_DMA_BLOCK_SIZE, 2, 128, 0); */ + ivtv_vapi(itv, CX2341X_ENC_SET_DMA_BLOCK_SIZE, 2, 1, 1); + + /* Stuff from Windows, we don't know what it is */ + ivtv_vapi(itv, CX2341X_ENC_SET_VERT_CROP_LINE, 1, 0); + /* According to the docs, this should be correct. However, this is + untested. I don't dare enable this without having tested it. + Only very few old cards actually have this hardware combination. + ivtv_vapi(itv, CX2341X_ENC_SET_VERT_CROP_LINE, 1, + ((itv->hw_flags & IVTV_HW_SAA7114) && itv->is_60hz) ? 10001 : 0); + */ + ivtv_vapi(itv, CX2341X_ENC_MISC, 2, 3, !itv->has_cx23415); + ivtv_vapi(itv, CX2341X_ENC_MISC, 2, 8, 0); + ivtv_vapi(itv, CX2341X_ENC_MISC, 2, 4, 1); + ivtv_vapi(itv, CX2341X_ENC_MISC, 1, 12); + + /* assign placeholder */ + ivtv_vapi(itv, CX2341X_ENC_SET_PLACEHOLDER, 12, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); + + if (itv->card->hw_all & (IVTV_HW_SAA7115 | IVTV_HW_SAA717X)) + digitizer = 0xF1; + else if (itv->card->hw_all & IVTV_HW_SAA7114) + digitizer = 0xEF; + else /* cx25840 */ + digitizer = 0x140; + + ivtv_vapi(itv, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, digitizer, digitizer); + + /* Setup VBI */ + if (itv->v4l2_cap & V4L2_CAP_VBI_CAPTURE) { + ivtv_vbi_setup(itv); + } + + /* assign program index info. Mask 7: select I/P/B, Num_req: 400 max */ + ivtv_vapi_result(itv, data, CX2341X_ENC_SET_PGM_INDEX_INFO, 2, 7, 400); + itv->pgm_info_offset = data[0]; + itv->pgm_info_num = data[1]; + itv->pgm_info_write_idx = 0; + itv->pgm_info_read_idx = 0; + + IVTV_DEBUG_INFO("PGM Index at 0x%08x with %d elements\n", + itv->pgm_info_offset, itv->pgm_info_num); + + /* Setup API for Stream */ + cx2341x_handler_setup(&itv->cxhdl); + + /* mute if capturing radio */ + if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) + ivtv_vapi(itv, CX2341X_ENC_MUTE_VIDEO, 1, + 1 | (v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute_yuv) << 8)); + } + + /* Vsync Setup */ + if (itv->has_cx23415 && !test_and_set_bit(IVTV_F_I_DIG_RST, &itv->i_flags)) { + /* event notification (on) */ + ivtv_vapi(itv, CX2341X_ENC_SET_EVENT_NOTIFICATION, 4, 0, 1, IVTV_IRQ_ENC_VIM_RST, -1); + ivtv_clear_irq_mask(itv, IVTV_IRQ_ENC_VIM_RST); + } + + if (atomic_read(&itv->capturing) == 0) { + /* Clear all Pending Interrupts */ + ivtv_set_irq_mask(itv, IVTV_IRQ_MASK_CAPTURE); + + clear_bit(IVTV_F_I_EOS, &itv->i_flags); + + cx2341x_handler_set_busy(&itv->cxhdl, 1); + + /* Initialize Digitizer for Capture */ + /* Avoid tinny audio problem - ensure audio clocks are going */ + v4l2_subdev_call(itv->sd_audio, audio, s_stream, 1); + /* Avoid unpredictable PCI bus hang - disable video clocks */ + v4l2_subdev_call(itv->sd_video, video, s_stream, 0); + ivtv_msleep_timeout(300, 0); + ivtv_vapi(itv, CX2341X_ENC_INITIALIZE_INPUT, 0); + v4l2_subdev_call(itv->sd_video, video, s_stream, 1); + } + + /* begin_capture */ + if (ivtv_vapi(itv, CX2341X_ENC_START_CAPTURE, 2, captype, subtype)) + { + IVTV_DEBUG_WARN( "Error starting capture!\n"); + return -EINVAL; + } + + /* Start Passthrough */ + if (enable_passthrough) { + ivtv_passthrough_mode(itv, 1); + } + + if (s->type == IVTV_ENC_STREAM_TYPE_VBI) + ivtv_clear_irq_mask(itv, IVTV_IRQ_ENC_VBI_CAP); + else + ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_CAPTURE); + + /* you're live! sit back and await interrupts :) */ + atomic_inc(&itv->capturing); + return 0; +} +EXPORT_SYMBOL(ivtv_start_v4l2_encode_stream); + +static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + struct ivtv *itv = s->itv; + int datatype; + u16 width; + u16 height; + + if (s->vdev == NULL) + return -EINVAL; + + IVTV_DEBUG_INFO("Setting some initial decoder settings\n"); + + width = itv->cxhdl.width; + height = itv->cxhdl.height; + + /* set audio mode to left/stereo for dual/stereo mode. */ + ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); + + /* set number of internal decoder buffers */ + ivtv_vapi(itv, CX2341X_DEC_SET_DISPLAY_BUFFERS, 1, 0); + + /* prebuffering */ + ivtv_vapi(itv, CX2341X_DEC_SET_PREBUFFERING, 1, 1); + + /* extract from user packets */ + ivtv_vapi_result(itv, data, CX2341X_DEC_EXTRACT_VBI, 1, 1); + itv->vbi.dec_start = data[0]; + + IVTV_DEBUG_INFO("Decoder VBI RE-Insert start 0x%08x size 0x%08x\n", + itv->vbi.dec_start, data[1]); + + /* set decoder source settings */ + /* Data type: 0 = mpeg from host, + 1 = yuv from encoder, + 2 = yuv_from_host */ + switch (s->type) { + case IVTV_DEC_STREAM_TYPE_YUV: + if (itv->output_mode == OUT_PASSTHROUGH) { + datatype = 1; + } else { + /* Fake size to avoid switching video standard */ + datatype = 2; + width = 720; + height = itv->is_out_50hz ? 576 : 480; + } + IVTV_DEBUG_INFO("Setup DEC YUV Stream data[0] = %d\n", datatype); + break; + case IVTV_DEC_STREAM_TYPE_MPG: + default: + datatype = 0; + break; + } + if (ivtv_vapi(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, datatype, + width, height, itv->cxhdl.audio_properties)) { + IVTV_DEBUG_WARN("Couldn't initialize decoder source\n"); + } + + /* Decoder sometimes dies here, so wait a moment */ + ivtv_msleep_timeout(10, 0); + + /* Known failure point for firmware, so check */ + return ivtv_firmware_check(itv, "ivtv_setup_v4l2_decode_stream"); +} + +int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset) +{ + struct ivtv *itv = s->itv; + int rc; + + if (s->vdev == NULL) + return -EINVAL; + + if (test_and_set_bit(IVTV_F_S_STREAMING, &s->s_flags)) + return 0; /* already started */ + + IVTV_DEBUG_INFO("Starting decode stream %s (gop_offset %d)\n", s->name, gop_offset); + + rc = ivtv_setup_v4l2_decode_stream(s); + if (rc < 0) { + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + return rc; + } + + /* set dma size to 65536 bytes */ + ivtv_vapi(itv, CX2341X_DEC_SET_DMA_BLOCK_SIZE, 1, 65536); + + /* Clear Streamoff */ + clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags); + + /* Zero out decoder counters */ + writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA_END].data[0]); + writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA_END].data[1]); + writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA_END].data[2]); + writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA_END].data[3]); + writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA].data[0]); + writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA].data[1]); + writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA].data[2]); + writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA].data[3]); + + /* turn on notification of dual/stereo mode change */ + ivtv_vapi(itv, CX2341X_DEC_SET_EVENT_NOTIFICATION, 4, 0, 1, IVTV_IRQ_DEC_AUD_MODE_CHG, -1); + + /* start playback */ + ivtv_vapi(itv, CX2341X_DEC_START_PLAYBACK, 2, gop_offset, 0); + + /* Let things settle before we actually start */ + ivtv_msleep_timeout(10, 0); + + /* Clear the following Interrupt mask bits for decoding */ + ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_DECODE); + IVTV_DEBUG_IRQ("IRQ Mask is now: 0x%08x\n", itv->irqmask); + + /* you're live! sit back and await interrupts :) */ + atomic_inc(&itv->decoding); + return 0; +} + +void ivtv_stop_all_captures(struct ivtv *itv) +{ + int i; + + for (i = IVTV_MAX_STREAMS - 1; i >= 0; i--) { + struct ivtv_stream *s = &itv->streams[i]; + + if (s->vdev == NULL) + continue; + if (test_bit(IVTV_F_S_STREAMING, &s->s_flags)) { + ivtv_stop_v4l2_encode_stream(s, 0); + } + } +} + +int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end) +{ + struct ivtv *itv = s->itv; + DECLARE_WAITQUEUE(wait, current); + int cap_type; + int stopmode; + + if (s->vdev == NULL) + return -EINVAL; + + /* This function assumes that you are allowed to stop the capture + and that we are actually capturing */ + + IVTV_DEBUG_INFO("Stop Capture\n"); + + if (s->type == IVTV_DEC_STREAM_TYPE_VOUT) + return 0; + if (atomic_read(&itv->capturing) == 0) + return 0; + + switch (s->type) { + case IVTV_ENC_STREAM_TYPE_YUV: + cap_type = 1; + break; + case IVTV_ENC_STREAM_TYPE_PCM: + cap_type = 1; + break; + case IVTV_ENC_STREAM_TYPE_VBI: + cap_type = 1; + break; + case IVTV_ENC_STREAM_TYPE_MPG: + default: + cap_type = 0; + break; + } + + /* Stop Capture Mode */ + if (s->type == IVTV_ENC_STREAM_TYPE_MPG && gop_end) { + stopmode = 0; + } else { + stopmode = 1; + } + + /* end_capture */ + /* when: 0 = end of GOP 1 = NOW!, type: 0 = mpeg, subtype: 3 = video+audio */ + ivtv_vapi(itv, CX2341X_ENC_STOP_CAPTURE, 3, stopmode, cap_type, s->subtype); + + if (!test_bit(IVTV_F_S_PASSTHROUGH, &s->s_flags)) { + if (s->type == IVTV_ENC_STREAM_TYPE_MPG && gop_end) { + /* only run these if we're shutting down the last cap */ + unsigned long duration; + unsigned long then = jiffies; + + add_wait_queue(&itv->eos_waitq, &wait); + + set_current_state(TASK_INTERRUPTIBLE); + + /* wait 2s for EOS interrupt */ + while (!test_bit(IVTV_F_I_EOS, &itv->i_flags) && + time_before(jiffies, + then + msecs_to_jiffies(2000))) { + schedule_timeout(msecs_to_jiffies(10)); + } + + /* To convert jiffies to ms, we must multiply by 1000 + * and divide by HZ. To avoid runtime division, we + * convert this to multiplication by 1000/HZ. + * Since integer division truncates, we get the best + * accuracy if we do a rounding calculation of the constant. + * Think of the case where HZ is 1024. + */ + duration = ((1000 + HZ / 2) / HZ) * (jiffies - then); + + if (!test_bit(IVTV_F_I_EOS, &itv->i_flags)) { + IVTV_DEBUG_WARN("%s: EOS interrupt not received! stopping anyway.\n", s->name); + IVTV_DEBUG_WARN("%s: waited %lu ms.\n", s->name, duration); + } else { + IVTV_DEBUG_INFO("%s: EOS took %lu ms to occur.\n", s->name, duration); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&itv->eos_waitq, &wait); + set_bit(IVTV_F_S_STREAMOFF, &s->s_flags); + } + + /* Handle any pending interrupts */ + ivtv_msleep_timeout(100, 0); + } + + atomic_dec(&itv->capturing); + + /* Clear capture and no-read bits */ + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + + if (s->type == IVTV_ENC_STREAM_TYPE_VBI) + ivtv_set_irq_mask(itv, IVTV_IRQ_ENC_VBI_CAP); + + if (atomic_read(&itv->capturing) > 0) { + return 0; + } + + cx2341x_handler_set_busy(&itv->cxhdl, 0); + + /* Set the following Interrupt mask bits for capture */ + ivtv_set_irq_mask(itv, IVTV_IRQ_MASK_CAPTURE); + del_timer(&itv->dma_timer); + + /* event notification (off) */ + if (test_and_clear_bit(IVTV_F_I_DIG_RST, &itv->i_flags)) { + /* type: 0 = refresh */ + /* on/off: 0 = off, intr: 0x10000000, mbox_id: -1: none */ + ivtv_vapi(itv, CX2341X_ENC_SET_EVENT_NOTIFICATION, 4, 0, 0, IVTV_IRQ_ENC_VIM_RST, -1); + ivtv_set_irq_mask(itv, IVTV_IRQ_ENC_VIM_RST); + } + + /* Raw-passthrough is implied on start. Make sure it's stopped so + the encoder will re-initialize when next started */ + ivtv_vapi(itv, CX2341X_ENC_STOP_CAPTURE, 3, 1, 2, 7); + + wake_up(&s->waitq); + + return 0; +} +EXPORT_SYMBOL(ivtv_stop_v4l2_encode_stream); + +int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts) +{ + static const struct v4l2_event ev = { + .type = V4L2_EVENT_EOS, + }; + struct ivtv *itv = s->itv; + + if (s->vdev == NULL) + return -EINVAL; + + if (s->type != IVTV_DEC_STREAM_TYPE_YUV && s->type != IVTV_DEC_STREAM_TYPE_MPG) + return -EINVAL; + + if (!test_bit(IVTV_F_S_STREAMING, &s->s_flags)) + return 0; + + IVTV_DEBUG_INFO("Stop Decode at %llu, flags: %x\n", (unsigned long long)pts, flags); + + /* Stop Decoder */ + if (!(flags & V4L2_DEC_CMD_STOP_IMMEDIATELY) || pts) { + u32 tmp = 0; + + /* Wait until the decoder is no longer running */ + if (pts) { + ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 3, + 0, (u32)(pts & 0xffffffff), (u32)(pts >> 32)); + } + while (1) { + u32 data[CX2341X_MBOX_MAX_DATA]; + ivtv_vapi_result(itv, data, CX2341X_DEC_GET_XFER_INFO, 0); + if (s->q_full.buffers + s->q_dma.buffers == 0) { + if (tmp == data[3]) + break; + tmp = data[3]; + } + if (ivtv_msleep_timeout(100, 1)) + break; + } + } + ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 3, flags & V4L2_DEC_CMD_STOP_TO_BLACK, 0, 0); + + /* turn off notification of dual/stereo mode change */ + ivtv_vapi(itv, CX2341X_DEC_SET_EVENT_NOTIFICATION, 4, 0, 0, IVTV_IRQ_DEC_AUD_MODE_CHG, -1); + + ivtv_set_irq_mask(itv, IVTV_IRQ_MASK_DECODE); + del_timer(&itv->dma_timer); + + clear_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags); + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + ivtv_flush_queues(s); + + /* decoder needs time to settle */ + ivtv_msleep_timeout(40, 0); + + /* decrement decoding */ + atomic_dec(&itv->decoding); + + set_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags); + wake_up(&itv->event_waitq); + v4l2_event_queue(s->vdev, &ev); + + /* wake up wait queues */ + wake_up(&s->waitq); + + return 0; +} + +int ivtv_passthrough_mode(struct ivtv *itv, int enable) +{ + struct ivtv_stream *yuv_stream = &itv->streams[IVTV_ENC_STREAM_TYPE_YUV]; + struct ivtv_stream *dec_stream = &itv->streams[IVTV_DEC_STREAM_TYPE_YUV]; + + if (yuv_stream->vdev == NULL || dec_stream->vdev == NULL) + return -EINVAL; + + IVTV_DEBUG_INFO("ivtv ioctl: Select passthrough mode\n"); + + /* Prevent others from starting/stopping streams while we + initiate/terminate passthrough mode */ + if (enable) { + if (itv->output_mode == OUT_PASSTHROUGH) { + return 0; + } + if (ivtv_set_output_mode(itv, OUT_PASSTHROUGH) != OUT_PASSTHROUGH) + return -EBUSY; + + /* Fully initialize stream, and then unflag init */ + set_bit(IVTV_F_S_PASSTHROUGH, &dec_stream->s_flags); + set_bit(IVTV_F_S_STREAMING, &dec_stream->s_flags); + + /* Setup YUV Decoder */ + ivtv_setup_v4l2_decode_stream(dec_stream); + + /* Start Decoder */ + ivtv_vapi(itv, CX2341X_DEC_START_PLAYBACK, 2, 0, 1); + atomic_inc(&itv->decoding); + + /* Setup capture if not already done */ + if (atomic_read(&itv->capturing) == 0) { + cx2341x_handler_setup(&itv->cxhdl); + cx2341x_handler_set_busy(&itv->cxhdl, 1); + } + + /* Start Passthrough Mode */ + ivtv_vapi(itv, CX2341X_ENC_START_CAPTURE, 2, 2, 11); + atomic_inc(&itv->capturing); + return 0; + } + + if (itv->output_mode != OUT_PASSTHROUGH) + return 0; + + /* Stop Passthrough Mode */ + ivtv_vapi(itv, CX2341X_ENC_STOP_CAPTURE, 3, 1, 2, 11); + ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 3, 1, 0, 0); + + atomic_dec(&itv->capturing); + atomic_dec(&itv->decoding); + clear_bit(IVTV_F_S_PASSTHROUGH, &dec_stream->s_flags); + clear_bit(IVTV_F_S_STREAMING, &dec_stream->s_flags); + itv->output_mode = OUT_NONE; + if (atomic_read(&itv->capturing) == 0) + cx2341x_handler_set_busy(&itv->cxhdl, 0); + + return 0; +} diff --git a/drivers/media/pci/ivtv/ivtv-streams.h b/drivers/media/pci/ivtv/ivtv-streams.h new file mode 100644 index 00000000..a653a513 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-streams.h @@ -0,0 +1,37 @@ +/* + init/start/stop/exit stream functions + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_STREAMS_H +#define IVTV_STREAMS_H + +int ivtv_streams_setup(struct ivtv *itv); +int ivtv_streams_register(struct ivtv *itv); +void ivtv_streams_cleanup(struct ivtv *itv, int unregister); + +/* Capture related */ +int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s); +int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end); +int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset); +int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts); + +void ivtv_stop_all_captures(struct ivtv *itv); +int ivtv_passthrough_mode(struct ivtv *itv, int enable); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-udma.c b/drivers/media/pci/ivtv/ivtv-udma.c new file mode 100644 index 00000000..7338cb2d --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-udma.c @@ -0,0 +1,234 @@ +/* + User DMA + + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-udma.h" + +void ivtv_udma_get_page_info(struct ivtv_dma_page_info *dma_page, unsigned long first, unsigned long size) +{ + dma_page->uaddr = first & PAGE_MASK; + dma_page->offset = first & ~PAGE_MASK; + dma_page->tail = 1 + ((first+size-1) & ~PAGE_MASK); + dma_page->first = (first & PAGE_MASK) >> PAGE_SHIFT; + dma_page->last = ((first+size-1) & PAGE_MASK) >> PAGE_SHIFT; + dma_page->page_count = dma_page->last - dma_page->first + 1; + if (dma_page->page_count == 1) dma_page->tail -= dma_page->offset; +} + +int ivtv_udma_fill_sg_list (struct ivtv_user_dma *dma, struct ivtv_dma_page_info *dma_page, int map_offset) +{ + int i, offset; + unsigned long flags; + + if (map_offset < 0) + return map_offset; + + offset = dma_page->offset; + + /* Fill SG Array with new values */ + for (i = 0; i < dma_page->page_count; i++) { + unsigned int len = (i == dma_page->page_count - 1) ? + dma_page->tail : PAGE_SIZE - offset; + + if (PageHighMem(dma->map[map_offset])) { + void *src; + + if (dma->bouncemap[map_offset] == NULL) + dma->bouncemap[map_offset] = alloc_page(GFP_KERNEL); + if (dma->bouncemap[map_offset] == NULL) + return -1; + local_irq_save(flags); + src = kmap_atomic(dma->map[map_offset]) + offset; + memcpy(page_address(dma->bouncemap[map_offset]) + offset, src, len); + kunmap_atomic(src); + local_irq_restore(flags); + sg_set_page(&dma->SGlist[map_offset], dma->bouncemap[map_offset], len, offset); + } + else { + sg_set_page(&dma->SGlist[map_offset], dma->map[map_offset], len, offset); + } + offset = 0; + map_offset++; + } + return map_offset; +} + +void ivtv_udma_fill_sg_array (struct ivtv_user_dma *dma, u32 buffer_offset, u32 buffer_offset_2, u32 split) { + int i; + struct scatterlist *sg; + + for (i = 0, sg = dma->SGlist; i < dma->SG_length; i++, sg++) { + dma->SGarray[i].size = cpu_to_le32(sg_dma_len(sg)); + dma->SGarray[i].src = cpu_to_le32(sg_dma_address(sg)); + dma->SGarray[i].dst = cpu_to_le32(buffer_offset); + buffer_offset += sg_dma_len(sg); + + split -= sg_dma_len(sg); + if (split == 0) + buffer_offset = buffer_offset_2; + } +} + +/* User DMA Buffers */ +void ivtv_udma_alloc(struct ivtv *itv) +{ + if (itv->udma.SG_handle == 0) { + /* Map DMA Page Array Buffer */ + itv->udma.SG_handle = pci_map_single(itv->pdev, itv->udma.SGarray, + sizeof(itv->udma.SGarray), PCI_DMA_TODEVICE); + ivtv_udma_sync_for_cpu(itv); + } +} + +int ivtv_udma_setup(struct ivtv *itv, unsigned long ivtv_dest_addr, + void __user *userbuf, int size_in_bytes) +{ + struct ivtv_dma_page_info user_dma; + struct ivtv_user_dma *dma = &itv->udma; + int i, err; + + IVTV_DEBUG_DMA("ivtv_udma_setup, dst: 0x%08x\n", (unsigned int)ivtv_dest_addr); + + /* Still in USE */ + if (dma->SG_length || dma->page_count) { + IVTV_DEBUG_WARN("ivtv_udma_setup: SG_length %d page_count %d still full?\n", + dma->SG_length, dma->page_count); + return -EBUSY; + } + + ivtv_udma_get_page_info(&user_dma, (unsigned long)userbuf, size_in_bytes); + + if (user_dma.page_count <= 0) { + IVTV_DEBUG_WARN("ivtv_udma_setup: Error %d page_count from %d bytes %d offset\n", + user_dma.page_count, size_in_bytes, user_dma.offset); + return -EINVAL; + } + + /* Get user pages for DMA Xfer */ + down_read(¤t->mm->mmap_sem); + err = get_user_pages(current, current->mm, + user_dma.uaddr, user_dma.page_count, 0, 1, dma->map, NULL); + up_read(¤t->mm->mmap_sem); + + if (user_dma.page_count != err) { + IVTV_DEBUG_WARN("failed to map user pages, returned %d instead of %d\n", + err, user_dma.page_count); + if (err >= 0) { + for (i = 0; i < err; i++) + put_page(dma->map[i]); + return -EINVAL; + } + return err; + } + + dma->page_count = user_dma.page_count; + + /* Fill SG List with new values */ + if (ivtv_udma_fill_sg_list(dma, &user_dma, 0) < 0) { + for (i = 0; i < dma->page_count; i++) { + put_page(dma->map[i]); + } + dma->page_count = 0; + return -ENOMEM; + } + + /* Map SG List */ + dma->SG_length = pci_map_sg(itv->pdev, dma->SGlist, dma->page_count, PCI_DMA_TODEVICE); + + /* Fill SG Array with new values */ + ivtv_udma_fill_sg_array (dma, ivtv_dest_addr, 0, -1); + + /* Tag SG Array with Interrupt Bit */ + dma->SGarray[dma->SG_length - 1].size |= cpu_to_le32(0x80000000); + + ivtv_udma_sync_for_device(itv); + return dma->page_count; +} + +void ivtv_udma_unmap(struct ivtv *itv) +{ + struct ivtv_user_dma *dma = &itv->udma; + int i; + + IVTV_DEBUG_INFO("ivtv_unmap_user_dma\n"); + + /* Nothing to free */ + if (dma->page_count == 0) + return; + + /* Unmap Scatterlist */ + if (dma->SG_length) { + pci_unmap_sg(itv->pdev, dma->SGlist, dma->page_count, PCI_DMA_TODEVICE); + dma->SG_length = 0; + } + /* sync DMA */ + ivtv_udma_sync_for_cpu(itv); + + /* Release User Pages */ + for (i = 0; i < dma->page_count; i++) { + put_page(dma->map[i]); + } + dma->page_count = 0; +} + +void ivtv_udma_free(struct ivtv *itv) +{ + int i; + + /* Unmap SG Array */ + if (itv->udma.SG_handle) { + pci_unmap_single(itv->pdev, itv->udma.SG_handle, + sizeof(itv->udma.SGarray), PCI_DMA_TODEVICE); + } + + /* Unmap Scatterlist */ + if (itv->udma.SG_length) { + pci_unmap_sg(itv->pdev, itv->udma.SGlist, itv->udma.page_count, PCI_DMA_TODEVICE); + } + + for (i = 0; i < IVTV_DMA_SG_OSD_ENT; i++) { + if (itv->udma.bouncemap[i]) + __free_page(itv->udma.bouncemap[i]); + } +} + +void ivtv_udma_start(struct ivtv *itv) +{ + IVTV_DEBUG_DMA("start UDMA\n"); + write_reg(itv->udma.SG_handle, IVTV_REG_DECDMAADDR); + write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x01, IVTV_REG_DMAXFER); + set_bit(IVTV_F_I_DMA, &itv->i_flags); + set_bit(IVTV_F_I_UDMA, &itv->i_flags); + clear_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags); +} + +void ivtv_udma_prepare(struct ivtv *itv) +{ + unsigned long flags; + + spin_lock_irqsave(&itv->dma_reg_lock, flags); + if (!test_bit(IVTV_F_I_DMA, &itv->i_flags)) + ivtv_udma_start(itv); + else + set_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags); + spin_unlock_irqrestore(&itv->dma_reg_lock, flags); +} diff --git a/drivers/media/pci/ivtv/ivtv-udma.h b/drivers/media/pci/ivtv/ivtv-udma.h new file mode 100644 index 00000000..ee3c9efb --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-udma.h @@ -0,0 +1,48 @@ +/* + Copyright (C) 2003-2004 Kevin Thayer + Copyright (C) 2004 Chris Kennedy + Copyright (C) 2006-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_UDMA_H +#define IVTV_UDMA_H + +/* User DMA functions */ +void ivtv_udma_get_page_info(struct ivtv_dma_page_info *dma_page, unsigned long first, unsigned long size); +int ivtv_udma_fill_sg_list(struct ivtv_user_dma *dma, struct ivtv_dma_page_info *dma_page, int map_offset); +void ivtv_udma_fill_sg_array(struct ivtv_user_dma *dma, u32 buffer_offset, u32 buffer_offset_2, u32 split); +int ivtv_udma_setup(struct ivtv *itv, unsigned long ivtv_dest_addr, + void __user *userbuf, int size_in_bytes); +void ivtv_udma_unmap(struct ivtv *itv); +void ivtv_udma_free(struct ivtv *itv); +void ivtv_udma_alloc(struct ivtv *itv); +void ivtv_udma_prepare(struct ivtv *itv); +void ivtv_udma_start(struct ivtv *itv); + +static inline void ivtv_udma_sync_for_device(struct ivtv *itv) +{ + pci_dma_sync_single_for_device(itv->pdev, itv->udma.SG_handle, + sizeof(itv->udma.SGarray), PCI_DMA_TODEVICE); +} + +static inline void ivtv_udma_sync_for_cpu(struct ivtv *itv) +{ + pci_dma_sync_single_for_cpu(itv->pdev, itv->udma.SG_handle, + sizeof(itv->udma.SGarray), PCI_DMA_TODEVICE); +} + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-vbi.c b/drivers/media/pci/ivtv/ivtv-vbi.c new file mode 100644 index 00000000..3c156bc7 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-vbi.c @@ -0,0 +1,549 @@ +/* + Vertical Blank Interval support functions + Copyright (C) 2004-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-i2c.h" +#include "ivtv-ioctl.h" +#include "ivtv-queue.h" +#include "ivtv-cards.h" +#include "ivtv-vbi.h" + +static void ivtv_set_vps(struct ivtv *itv, int enabled) +{ + struct v4l2_sliced_vbi_data data; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return; + data.id = V4L2_SLICED_VPS; + data.field = 0; + data.line = enabled ? 16 : 0; + data.data[2] = itv->vbi.vps_payload.data[0]; + data.data[8] = itv->vbi.vps_payload.data[1]; + data.data[9] = itv->vbi.vps_payload.data[2]; + data.data[10] = itv->vbi.vps_payload.data[3]; + data.data[11] = itv->vbi.vps_payload.data[4]; + ivtv_call_hw(itv, IVTV_HW_SAA7127, vbi, s_vbi_data, &data); +} + +static void ivtv_set_cc(struct ivtv *itv, int mode, const struct vbi_cc *cc) +{ + struct v4l2_sliced_vbi_data data; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return; + data.id = V4L2_SLICED_CAPTION_525; + data.field = 0; + data.line = (mode & 1) ? 21 : 0; + data.data[0] = cc->odd[0]; + data.data[1] = cc->odd[1]; + ivtv_call_hw(itv, IVTV_HW_SAA7127, vbi, s_vbi_data, &data); + data.field = 1; + data.line = (mode & 2) ? 21 : 0; + data.data[0] = cc->even[0]; + data.data[1] = cc->even[1]; + ivtv_call_hw(itv, IVTV_HW_SAA7127, vbi, s_vbi_data, &data); +} + +static void ivtv_set_wss(struct ivtv *itv, int enabled, int mode) +{ + struct v4l2_sliced_vbi_data data; + + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return; + /* When using a 50 Hz system, always turn on the + wide screen signal with 4x3 ratio as the default. + Turning this signal on and off can confuse certain + TVs. As far as I can tell there is no reason not to + transmit this signal. */ + if ((itv->std_out & V4L2_STD_625_50) && !enabled) { + enabled = 1; + mode = 0x08; /* 4x3 full format */ + } + data.id = V4L2_SLICED_WSS_625; + data.field = 0; + data.line = enabled ? 23 : 0; + data.data[0] = mode & 0xff; + data.data[1] = (mode >> 8) & 0xff; + ivtv_call_hw(itv, IVTV_HW_SAA7127, vbi, s_vbi_data, &data); +} + +static int odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static void ivtv_write_vbi_line(struct ivtv *itv, + const struct v4l2_sliced_vbi_data *d, + struct vbi_cc *cc, int *found_cc) +{ + struct vbi_info *vi = &itv->vbi; + + if (d->id == V4L2_SLICED_CAPTION_525 && d->line == 21) { + if (d->field) { + cc->even[0] = d->data[0]; + cc->even[1] = d->data[1]; + } else { + cc->odd[0] = d->data[0]; + cc->odd[1] = d->data[1]; + } + *found_cc = 1; + } else if (d->id == V4L2_SLICED_VPS && d->line == 16 && d->field == 0) { + struct vbi_vps vps; + + vps.data[0] = d->data[2]; + vps.data[1] = d->data[8]; + vps.data[2] = d->data[9]; + vps.data[3] = d->data[10]; + vps.data[4] = d->data[11]; + if (memcmp(&vps, &vi->vps_payload, sizeof(vps))) { + vi->vps_payload = vps; + set_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags); + } + } else if (d->id == V4L2_SLICED_WSS_625 && + d->line == 23 && d->field == 0) { + int wss = d->data[0] | d->data[1] << 8; + + if (vi->wss_payload != wss) { + vi->wss_payload = wss; + set_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags); + } + } +} + +static void ivtv_write_vbi_cc_lines(struct ivtv *itv, const struct vbi_cc *cc) +{ + struct vbi_info *vi = &itv->vbi; + + if (vi->cc_payload_idx < ARRAY_SIZE(vi->cc_payload)) { + memcpy(&vi->cc_payload[vi->cc_payload_idx], cc, + sizeof(struct vbi_cc)); + vi->cc_payload_idx++; + set_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags); + } +} + +static void ivtv_write_vbi(struct ivtv *itv, + const struct v4l2_sliced_vbi_data *sliced, + size_t cnt) +{ + struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } }; + int found_cc = 0; + size_t i; + + for (i = 0; i < cnt; i++) + ivtv_write_vbi_line(itv, sliced + i, &cc, &found_cc); + + if (found_cc) + ivtv_write_vbi_cc_lines(itv, &cc); +} + +ssize_t +ivtv_write_vbi_from_user(struct ivtv *itv, + const struct v4l2_sliced_vbi_data __user *sliced, + size_t cnt) +{ + struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } }; + int found_cc = 0; + size_t i; + struct v4l2_sliced_vbi_data d; + ssize_t ret = cnt * sizeof(struct v4l2_sliced_vbi_data); + + for (i = 0; i < cnt; i++) { + if (copy_from_user(&d, sliced + i, + sizeof(struct v4l2_sliced_vbi_data))) { + ret = -EFAULT; + break; + } + ivtv_write_vbi_line(itv, &d, &cc, &found_cc); + } + + if (found_cc) + ivtv_write_vbi_cc_lines(itv, &cc); + + return ret; +} + +static void copy_vbi_data(struct ivtv *itv, int lines, u32 pts_stamp) +{ + int line = 0; + int i; + u32 linemask[2] = { 0, 0 }; + unsigned short size; + static const u8 mpeg_hdr_data[] = { + 0x00, 0x00, 0x01, 0xba, 0x44, 0x00, 0x0c, 0x66, + 0x24, 0x01, 0x01, 0xd1, 0xd3, 0xfa, 0xff, 0xff, + 0x00, 0x00, 0x01, 0xbd, 0x00, 0x1a, 0x84, 0x80, + 0x07, 0x21, 0x00, 0x5d, 0x63, 0xa7, 0xff, 0xff + }; + const int sd = sizeof(mpeg_hdr_data); /* start of vbi data */ + int idx = itv->vbi.frame % IVTV_VBI_FRAMES; + u8 *dst = &itv->vbi.sliced_mpeg_data[idx][0]; + + for (i = 0; i < lines; i++) { + int f, l; + + if (itv->vbi.sliced_data[i].id == 0) + continue; + + l = itv->vbi.sliced_data[i].line - 6; + f = itv->vbi.sliced_data[i].field; + if (f) + l += 18; + if (l < 32) + linemask[0] |= (1 << l); + else + linemask[1] |= (1 << (l - 32)); + dst[sd + 12 + line * 43] = + ivtv_service2vbi(itv->vbi.sliced_data[i].id); + memcpy(dst + sd + 12 + line * 43 + 1, itv->vbi.sliced_data[i].data, 42); + line++; + } + memcpy(dst, mpeg_hdr_data, sizeof(mpeg_hdr_data)); + if (line == 36) { + /* All lines are used, so there is no space for the linemask + (the max size of the VBI data is 36 * 43 + 4 bytes). + So in this case we use the magic number 'ITV0'. */ + memcpy(dst + sd, "ITV0", 4); + memmove(dst + sd + 4, dst + sd + 12, line * 43); + size = 4 + ((43 * line + 3) & ~3); + } else { + memcpy(dst + sd, "itv0", 4); + cpu_to_le32s(&linemask[0]); + cpu_to_le32s(&linemask[1]); + memcpy(dst + sd + 4, &linemask[0], 8); + size = 12 + ((43 * line + 3) & ~3); + } + dst[4+16] = (size + 10) >> 8; + dst[5+16] = (size + 10) & 0xff; + dst[9+16] = 0x21 | ((pts_stamp >> 29) & 0x6); + dst[10+16] = (pts_stamp >> 22) & 0xff; + dst[11+16] = 1 | ((pts_stamp >> 14) & 0xff); + dst[12+16] = (pts_stamp >> 7) & 0xff; + dst[13+16] = 1 | ((pts_stamp & 0x7f) << 1); + itv->vbi.sliced_mpeg_size[idx] = sd + size; +} + +static int ivtv_convert_ivtv_vbi(struct ivtv *itv, u8 *p) +{ + u32 linemask[2]; + int i, l, id2; + int line = 0; + + if (!memcmp(p, "itv0", 4)) { + memcpy(linemask, p + 4, 8); + p += 12; + } else if (!memcmp(p, "ITV0", 4)) { + linemask[0] = 0xffffffff; + linemask[1] = 0xf; + p += 4; + } else { + /* unknown VBI data, convert to empty VBI frame */ + linemask[0] = linemask[1] = 0; + } + for (i = 0; i < 36; i++) { + int err = 0; + + if (i < 32 && !(linemask[0] & (1 << i))) + continue; + if (i >= 32 && !(linemask[1] & (1 << (i - 32)))) + continue; + id2 = *p & 0xf; + switch (id2) { + case IVTV_SLICED_TYPE_TELETEXT_B: + id2 = V4L2_SLICED_TELETEXT_B; + break; + case IVTV_SLICED_TYPE_CAPTION_525: + id2 = V4L2_SLICED_CAPTION_525; + err = !odd_parity(p[1]) || !odd_parity(p[2]); + break; + case IVTV_SLICED_TYPE_VPS: + id2 = V4L2_SLICED_VPS; + break; + case IVTV_SLICED_TYPE_WSS_625: + id2 = V4L2_SLICED_WSS_625; + break; + default: + id2 = 0; + break; + } + if (err == 0) { + l = (i < 18) ? i + 6 : i - 18 + 6; + itv->vbi.sliced_dec_data[line].line = l; + itv->vbi.sliced_dec_data[line].field = i >= 18; + itv->vbi.sliced_dec_data[line].id = id2; + memcpy(itv->vbi.sliced_dec_data[line].data, p + 1, 42); + line++; + } + p += 43; + } + while (line < 36) { + itv->vbi.sliced_dec_data[line].id = 0; + itv->vbi.sliced_dec_data[line].line = 0; + itv->vbi.sliced_dec_data[line].field = 0; + line++; + } + return line * sizeof(itv->vbi.sliced_dec_data[0]); +} + +/* Compress raw VBI format, removes leading SAV codes and surplus space after the + field. + Returns new compressed size. */ +static u32 compress_raw_buf(struct ivtv *itv, u8 *buf, u32 size) +{ + u32 line_size = itv->vbi.raw_decoder_line_size; + u32 lines = itv->vbi.count; + u8 sav1 = itv->vbi.raw_decoder_sav_odd_field; + u8 sav2 = itv->vbi.raw_decoder_sav_even_field; + u8 *q = buf; + u8 *p; + int i; + + for (i = 0; i < lines; i++) { + p = buf + i * line_size; + + /* Look for SAV code */ + if (p[0] != 0xff || p[1] || p[2] || (p[3] != sav1 && p[3] != sav2)) { + break; + } + memcpy(q, p + 4, line_size - 4); + q += line_size - 4; + } + return lines * (line_size - 4); +} + + +/* Compressed VBI format, all found sliced blocks put next to one another + Returns new compressed size */ +static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8 sav) +{ + u32 line_size = itv->vbi.sliced_decoder_line_size; + struct v4l2_decode_vbi_line vbi; + int i; + unsigned lines = 0; + + /* find the first valid line */ + for (i = 0; i < size; i++, buf++) { + if (buf[0] == 0xff && !buf[1] && !buf[2] && buf[3] == sav) + break; + } + + size -= i; + if (size < line_size) { + return line; + } + for (i = 0; i < size / line_size; i++) { + u8 *p = buf + i * line_size; + + /* Look for SAV code */ + if (p[0] != 0xff || p[1] || p[2] || p[3] != sav) { + continue; + } + vbi.p = p + 4; + v4l2_subdev_call(itv->sd_video, vbi, decode_vbi_line, &vbi); + if (vbi.type && !(lines & (1 << vbi.line))) { + lines |= 1 << vbi.line; + itv->vbi.sliced_data[line].id = vbi.type; + itv->vbi.sliced_data[line].field = vbi.is_second_field; + itv->vbi.sliced_data[line].line = vbi.line; + memcpy(itv->vbi.sliced_data[line].data, vbi.p, 42); + line++; + } + } + return line; +} + +void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf, + u64 pts_stamp, int streamtype) +{ + u8 *p = (u8 *) buf->buf; + u32 size = buf->bytesused; + int y; + + /* Raw VBI data */ + if (streamtype == IVTV_ENC_STREAM_TYPE_VBI && ivtv_raw_vbi(itv)) { + u8 type; + + ivtv_buf_swap(buf); + + type = p[3]; + + size = buf->bytesused = compress_raw_buf(itv, p, size); + + /* second field of the frame? */ + if (type == itv->vbi.raw_decoder_sav_even_field) { + /* Dirty hack needed for backwards + compatibility of old VBI software. */ + p += size - 4; + memcpy(p, &itv->vbi.frame, 4); + itv->vbi.frame++; + } + return; + } + + /* Sliced VBI data with data insertion */ + if (streamtype == IVTV_ENC_STREAM_TYPE_VBI) { + int lines; + + ivtv_buf_swap(buf); + + /* first field */ + lines = compress_sliced_buf(itv, 0, p, size / 2, + itv->vbi.sliced_decoder_sav_odd_field); + /* second field */ + /* experimentation shows that the second half does not always begin + at the exact address. So start a bit earlier (hence 32). */ + lines = compress_sliced_buf(itv, lines, p + size / 2 - 32, size / 2 + 32, + itv->vbi.sliced_decoder_sav_even_field); + /* always return at least one empty line */ + if (lines == 0) { + itv->vbi.sliced_data[0].id = 0; + itv->vbi.sliced_data[0].line = 0; + itv->vbi.sliced_data[0].field = 0; + lines = 1; + } + buf->bytesused = size = lines * sizeof(itv->vbi.sliced_data[0]); + memcpy(p, &itv->vbi.sliced_data[0], size); + + if (itv->vbi.insert_mpeg) { + copy_vbi_data(itv, lines, pts_stamp); + } + itv->vbi.frame++; + return; + } + + /* Sliced VBI re-inserted from an MPEG stream */ + if (streamtype == IVTV_DEC_STREAM_TYPE_VBI) { + /* If the size is not 4-byte aligned, then the starting address + for the swapping is also shifted. After swapping the data the + real start address of the VBI data is exactly 4 bytes after the + original start. It's a bit fiddly but it works like a charm. + Non-4-byte alignment happens when an lseek is done on the input + mpeg file to a non-4-byte aligned position. So on arrival here + the VBI data is also non-4-byte aligned. */ + int offset = size & 3; + int cnt; + + if (offset) { + p += 4 - offset; + } + /* Swap Buffer */ + for (y = 0; y < size; y += 4) { + swab32s((u32 *)(p + y)); + } + + cnt = ivtv_convert_ivtv_vbi(itv, p + offset); + memcpy(buf->buf, itv->vbi.sliced_dec_data, cnt); + buf->bytesused = cnt; + + ivtv_write_vbi(itv, itv->vbi.sliced_dec_data, + cnt / sizeof(itv->vbi.sliced_dec_data[0])); + return; + } +} + +void ivtv_disable_cc(struct ivtv *itv) +{ + struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } }; + + clear_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags); + ivtv_set_cc(itv, 0, &cc); + itv->vbi.cc_payload_idx = 0; +} + + +void ivtv_vbi_work_handler(struct ivtv *itv) +{ + struct vbi_info *vi = &itv->vbi; + struct v4l2_sliced_vbi_data data; + struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } }; + + /* Lock */ + if (itv->output_mode == OUT_PASSTHROUGH) { + if (itv->is_50hz) { + data.id = V4L2_SLICED_WSS_625; + data.field = 0; + + if (v4l2_subdev_call(itv->sd_video, vbi, g_vbi_data, &data) == 0) { + ivtv_set_wss(itv, 1, data.data[0] & 0xf); + vi->wss_missing_cnt = 0; + } else if (vi->wss_missing_cnt == 4) { + ivtv_set_wss(itv, 1, 0x8); /* 4x3 full format */ + } else { + vi->wss_missing_cnt++; + } + } + else { + int mode = 0; + + data.id = V4L2_SLICED_CAPTION_525; + data.field = 0; + if (v4l2_subdev_call(itv->sd_video, vbi, g_vbi_data, &data) == 0) { + mode |= 1; + cc.odd[0] = data.data[0]; + cc.odd[1] = data.data[1]; + } + data.field = 1; + if (v4l2_subdev_call(itv->sd_video, vbi, g_vbi_data, &data) == 0) { + mode |= 2; + cc.even[0] = data.data[0]; + cc.even[1] = data.data[1]; + } + if (mode) { + vi->cc_missing_cnt = 0; + ivtv_set_cc(itv, mode, &cc); + } else if (vi->cc_missing_cnt == 4) { + ivtv_set_cc(itv, 0, &cc); + } else { + vi->cc_missing_cnt++; + } + } + return; + } + + if (test_and_clear_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags)) { + ivtv_set_wss(itv, 1, vi->wss_payload & 0xf); + } + + if (test_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags)) { + if (vi->cc_payload_idx == 0) { + clear_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags); + ivtv_set_cc(itv, 3, &cc); + } + while (vi->cc_payload_idx) { + cc = vi->cc_payload[0]; + + memmove(vi->cc_payload, vi->cc_payload + 1, + sizeof(vi->cc_payload) - sizeof(vi->cc_payload[0])); + vi->cc_payload_idx--; + if (vi->cc_payload_idx && cc.odd[0] == 0x80 && cc.odd[1] == 0x80) + continue; + + ivtv_set_cc(itv, 3, &cc); + break; + } + } + + if (test_and_clear_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags)) { + ivtv_set_vps(itv, 1); + } +} diff --git a/drivers/media/pci/ivtv/ivtv-vbi.h b/drivers/media/pci/ivtv/ivtv-vbi.h new file mode 100644 index 00000000..166dd0b7 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-vbi.h @@ -0,0 +1,34 @@ +/* + Vertical Blank Interval support functions + Copyright (C) 2004-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_VBI_H +#define IVTV_VBI_H + +ssize_t +ivtv_write_vbi_from_user(struct ivtv *itv, + const struct v4l2_sliced_vbi_data __user *sliced, + size_t count); +void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf, + u64 pts_stamp, int streamtype); +int ivtv_used_line(struct ivtv *itv, int line, int field); +void ivtv_disable_cc(struct ivtv *itv); +void ivtv_set_vbi(unsigned long arg); +void ivtv_vbi_work_handler(struct ivtv *itv); + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-version.h b/drivers/media/pci/ivtv/ivtv-version.h new file mode 100644 index 00000000..a20f346f --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-version.h @@ -0,0 +1,26 @@ +/* + ivtv driver version information + Copyright (C) 2005-2007 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_VERSION_H +#define IVTV_VERSION_H + +#define IVTV_DRIVER_NAME "ivtv" +#define IVTV_VERSION "1.4.3" + +#endif diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c new file mode 100644 index 00000000..2ad65eb2 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-yuv.c @@ -0,0 +1,1296 @@ +/* + yuv support + + Copyright (C) 2007 Ian Armstrong + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "ivtv-driver.h" +#include "ivtv-udma.h" +#include "ivtv-yuv.h" + +/* YUV buffer offsets */ +const u32 yuv_offset[IVTV_YUV_BUFFERS] = { + 0x001a8600, + 0x00240400, + 0x002d8200, + 0x00370000, + 0x00029000, + 0x000C0E00, + 0x006B0400, + 0x00748200 +}; + +static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, + struct ivtv_dma_frame *args) +{ + struct ivtv_dma_page_info y_dma; + struct ivtv_dma_page_info uv_dma; + struct yuv_playback_info *yi = &itv->yuv_info; + u8 frame = yi->draw_frame; + struct yuv_frame_info *f = &yi->new_frame_info[frame]; + int i; + int y_pages, uv_pages; + unsigned long y_buffer_offset, uv_buffer_offset; + int y_decode_height, uv_decode_height, y_size; + + y_buffer_offset = IVTV_DECODER_OFFSET + yuv_offset[frame]; + uv_buffer_offset = y_buffer_offset + IVTV_YUV_BUFFER_UV_OFFSET; + + y_decode_height = uv_decode_height = f->src_h + f->src_y; + + if (f->offset_y) + y_buffer_offset += 720 * 16; + + if (y_decode_height & 15) + y_decode_height = (y_decode_height + 16) & ~15; + + if (uv_decode_height & 31) + uv_decode_height = (uv_decode_height + 32) & ~31; + + y_size = 720 * y_decode_height; + + /* Still in USE */ + if (dma->SG_length || dma->page_count) { + IVTV_DEBUG_WARN + ("prep_user_dma: SG_length %d page_count %d still full?\n", + dma->SG_length, dma->page_count); + return -EBUSY; + } + + ivtv_udma_get_page_info (&y_dma, (unsigned long)args->y_source, 720 * y_decode_height); + ivtv_udma_get_page_info (&uv_dma, (unsigned long)args->uv_source, 360 * uv_decode_height); + + /* Get user pages for DMA Xfer */ + down_read(¤t->mm->mmap_sem); + y_pages = get_user_pages(current, current->mm, y_dma.uaddr, y_dma.page_count, 0, 1, &dma->map[0], NULL); + uv_pages = 0; /* silence gcc. value is set and consumed only if: */ + if (y_pages == y_dma.page_count) { + uv_pages = get_user_pages(current, current->mm, + uv_dma.uaddr, uv_dma.page_count, 0, 1, + &dma->map[y_pages], NULL); + } + up_read(¤t->mm->mmap_sem); + + if (y_pages != y_dma.page_count || uv_pages != uv_dma.page_count) { + int rc = -EFAULT; + + if (y_pages == y_dma.page_count) { + IVTV_DEBUG_WARN + ("failed to map uv user pages, returned %d " + "expecting %d\n", uv_pages, uv_dma.page_count); + + if (uv_pages >= 0) { + for (i = 0; i < uv_pages; i++) + put_page(dma->map[y_pages + i]); + rc = -EFAULT; + } else { + rc = uv_pages; + } + } else { + IVTV_DEBUG_WARN + ("failed to map y user pages, returned %d " + "expecting %d\n", y_pages, y_dma.page_count); + } + if (y_pages >= 0) { + for (i = 0; i < y_pages; i++) + put_page(dma->map[i]); + /* + * Inherit the -EFAULT from rc's + * initialization, but allow it to be + * overriden by uv_pages above if it was an + * actual errno. + */ + } else { + rc = y_pages; + } + return rc; + } + + dma->page_count = y_pages + uv_pages; + + /* Fill & map SG List */ + if (ivtv_udma_fill_sg_list (dma, &uv_dma, ivtv_udma_fill_sg_list (dma, &y_dma, 0)) < 0) { + IVTV_DEBUG_WARN("could not allocate bounce buffers for highmem userspace buffers\n"); + for (i = 0; i < dma->page_count; i++) { + put_page(dma->map[i]); + } + dma->page_count = 0; + return -ENOMEM; + } + dma->SG_length = pci_map_sg(itv->pdev, dma->SGlist, dma->page_count, PCI_DMA_TODEVICE); + + /* Fill SG Array with new values */ + ivtv_udma_fill_sg_array(dma, y_buffer_offset, uv_buffer_offset, y_size); + + /* If we've offset the y plane, ensure top area is blanked */ + if (f->offset_y && yi->blanking_dmaptr) { + dma->SGarray[dma->SG_length].size = cpu_to_le32(720*16); + dma->SGarray[dma->SG_length].src = cpu_to_le32(yi->blanking_dmaptr); + dma->SGarray[dma->SG_length].dst = cpu_to_le32(IVTV_DECODER_OFFSET + yuv_offset[frame]); + dma->SG_length++; + } + + /* Tag SG Array with Interrupt Bit */ + dma->SGarray[dma->SG_length - 1].size |= cpu_to_le32(0x80000000); + + ivtv_udma_sync_for_device(itv); + return 0; +} + +/* We rely on a table held in the firmware - Quick check. */ +int ivtv_yuv_filter_check(struct ivtv *itv) +{ + int i, y, uv; + + for (i = 0, y = 16, uv = 4; i < 16; i++, y += 24, uv += 12) { + if ((read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + y) != i << 16) || + (read_dec(IVTV_YUV_VERTICAL_FILTER_OFFSET + uv) != i << 16)) { + IVTV_WARN ("YUV filter table not found in firmware.\n"); + return -1; + } + } + return 0; +} + +static void ivtv_yuv_filter(struct ivtv *itv, int h_filter, int v_filter_1, int v_filter_2) +{ + u32 i, line; + + /* If any filter is -1, then don't update it */ + if (h_filter > -1) { + if (h_filter > 4) + h_filter = 4; + i = IVTV_YUV_HORIZONTAL_FILTER_OFFSET + (h_filter * 384); + for (line = 0; line < 16; line++) { + write_reg(read_dec(i), 0x02804); + write_reg(read_dec(i), 0x0281c); + i += 4; + write_reg(read_dec(i), 0x02808); + write_reg(read_dec(i), 0x02820); + i += 4; + write_reg(read_dec(i), 0x0280c); + write_reg(read_dec(i), 0x02824); + i += 4; + write_reg(read_dec(i), 0x02810); + write_reg(read_dec(i), 0x02828); + i += 4; + write_reg(read_dec(i), 0x02814); + write_reg(read_dec(i), 0x0282c); + i += 8; + write_reg(0, 0x02818); + write_reg(0, 0x02830); + } + IVTV_DEBUG_YUV("h_filter -> %d\n", h_filter); + } + + if (v_filter_1 > -1) { + if (v_filter_1 > 4) + v_filter_1 = 4; + i = IVTV_YUV_VERTICAL_FILTER_OFFSET + (v_filter_1 * 192); + for (line = 0; line < 16; line++) { + write_reg(read_dec(i), 0x02900); + i += 4; + write_reg(read_dec(i), 0x02904); + i += 8; + write_reg(0, 0x02908); + } + IVTV_DEBUG_YUV("v_filter_1 -> %d\n", v_filter_1); + } + + if (v_filter_2 > -1) { + if (v_filter_2 > 4) + v_filter_2 = 4; + i = IVTV_YUV_VERTICAL_FILTER_OFFSET + (v_filter_2 * 192); + for (line = 0; line < 16; line++) { + write_reg(read_dec(i), 0x0290c); + i += 4; + write_reg(read_dec(i), 0x02910); + i += 8; + write_reg(0, 0x02914); + } + IVTV_DEBUG_YUV("v_filter_2 -> %d\n", v_filter_2); + } +} + +static void ivtv_yuv_handle_horizontal(struct ivtv *itv, struct yuv_frame_info *f) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + u32 reg_2834, reg_2838, reg_283c; + u32 reg_2844, reg_2854, reg_285c; + u32 reg_2864, reg_2874, reg_2890; + u32 reg_2870, reg_2870_base, reg_2870_offset; + int x_cutoff; + int h_filter; + u32 master_width; + + IVTV_DEBUG_WARN + ("Adjust to width %d src_w %d dst_w %d src_x %d dst_x %d\n", + f->tru_w, f->src_w, f->dst_w, f->src_x, f->dst_x); + + /* How wide is the src image */ + x_cutoff = f->src_w + f->src_x; + + /* Set the display width */ + reg_2834 = f->dst_w; + reg_2838 = reg_2834; + + /* Set the display position */ + reg_2890 = f->dst_x; + + /* Index into the image horizontally */ + reg_2870 = 0; + + /* 2870 is normally fudged to align video coords with osd coords. + If running full screen, it causes an unwanted left shift + Remove the fudge if we almost fill the screen. + Gradually adjust the offset to avoid the video 'snapping' + left/right if it gets dragged through this region. + Only do this if osd is full width. */ + if (f->vis_w == 720) { + if ((f->tru_x - f->pan_x > -1) && (f->tru_x - f->pan_x <= 40) && (f->dst_w >= 680)) + reg_2870 = 10 - (f->tru_x - f->pan_x) / 4; + else if ((f->tru_x - f->pan_x < 0) && (f->tru_x - f->pan_x >= -20) && (f->dst_w >= 660)) + reg_2870 = (10 + (f->tru_x - f->pan_x) / 2); + + if (f->dst_w >= f->src_w) + reg_2870 = reg_2870 << 16 | reg_2870; + else + reg_2870 = ((reg_2870 & ~1) << 15) | (reg_2870 & ~1); + } + + if (f->dst_w < f->src_w) + reg_2870 = 0x000d000e - reg_2870; + else + reg_2870 = 0x0012000e - reg_2870; + + /* We're also using 2870 to shift the image left (src_x & negative dst_x) */ + reg_2870_offset = (f->src_x * ((f->dst_w << 21) / f->src_w)) >> 19; + + if (f->dst_w >= f->src_w) { + x_cutoff &= ~1; + master_width = (f->src_w * 0x00200000) / (f->dst_w); + if (master_width * f->dst_w != f->src_w * 0x00200000) + master_width++; + reg_2834 = (reg_2834 << 16) | x_cutoff; + reg_2838 = (reg_2838 << 16) | x_cutoff; + reg_283c = master_width >> 2; + reg_2844 = master_width >> 2; + reg_2854 = master_width; + reg_285c = master_width >> 1; + reg_2864 = master_width >> 1; + + /* We also need to factor in the scaling + (src_w - dst_w) / (src_w / 4) */ + if (f->dst_w > f->src_w) + reg_2870_base = ((f->dst_w - f->src_w)<<16) / (f->src_w <<14); + else + reg_2870_base = 0; + + reg_2870 += (((reg_2870_offset << 14) & 0xFFFF0000) | reg_2870_offset >> 2) + (reg_2870_base << 17 | reg_2870_base); + reg_2874 = 0; + } else if (f->dst_w < f->src_w / 2) { + master_width = (f->src_w * 0x00080000) / f->dst_w; + if (master_width * f->dst_w != f->src_w * 0x00080000) + master_width++; + reg_2834 = (reg_2834 << 16) | x_cutoff; + reg_2838 = (reg_2838 << 16) | x_cutoff; + reg_283c = master_width >> 2; + reg_2844 = master_width >> 1; + reg_2854 = master_width; + reg_285c = master_width >> 1; + reg_2864 = master_width >> 1; + reg_2870 += ((reg_2870_offset << 15) & 0xFFFF0000) | reg_2870_offset; + reg_2870 += (5 - (((f->src_w + f->src_w / 2) - 1) / f->dst_w)) << 16; + reg_2874 = 0x00000012; + } else { + master_width = (f->src_w * 0x00100000) / f->dst_w; + if (master_width * f->dst_w != f->src_w * 0x00100000) + master_width++; + reg_2834 = (reg_2834 << 16) | x_cutoff; + reg_2838 = (reg_2838 << 16) | x_cutoff; + reg_283c = master_width >> 2; + reg_2844 = master_width >> 1; + reg_2854 = master_width; + reg_285c = master_width >> 1; + reg_2864 = master_width >> 1; + reg_2870 += ((reg_2870_offset << 14) & 0xFFFF0000) | reg_2870_offset >> 1; + reg_2870 += (5 - (((f->src_w * 3) - 1) / f->dst_w)) << 16; + reg_2874 = 0x00000001; + } + + /* Select the horizontal filter */ + if (f->src_w == f->dst_w) { + /* An exact size match uses filter 0 */ + h_filter = 0; + } else { + /* Figure out which filter to use */ + h_filter = ((f->src_w << 16) / f->dst_w) >> 15; + h_filter = (h_filter >> 1) + (h_filter & 1); + /* Only an exact size match can use filter 0 */ + h_filter += !h_filter; + } + + write_reg(reg_2834, 0x02834); + write_reg(reg_2838, 0x02838); + IVTV_DEBUG_YUV("Update reg 0x2834 %08x->%08x 0x2838 %08x->%08x\n", + yi->reg_2834, reg_2834, yi->reg_2838, reg_2838); + + write_reg(reg_283c, 0x0283c); + write_reg(reg_2844, 0x02844); + + IVTV_DEBUG_YUV("Update reg 0x283c %08x->%08x 0x2844 %08x->%08x\n", + yi->reg_283c, reg_283c, yi->reg_2844, reg_2844); + + write_reg(0x00080514, 0x02840); + write_reg(0x00100514, 0x02848); + IVTV_DEBUG_YUV("Update reg 0x2840 %08x->%08x 0x2848 %08x->%08x\n", + yi->reg_2840, 0x00080514, yi->reg_2848, 0x00100514); + + write_reg(reg_2854, 0x02854); + IVTV_DEBUG_YUV("Update reg 0x2854 %08x->%08x \n", + yi->reg_2854, reg_2854); + + write_reg(reg_285c, 0x0285c); + write_reg(reg_2864, 0x02864); + IVTV_DEBUG_YUV("Update reg 0x285c %08x->%08x 0x2864 %08x->%08x\n", + yi->reg_285c, reg_285c, yi->reg_2864, reg_2864); + + write_reg(reg_2874, 0x02874); + IVTV_DEBUG_YUV("Update reg 0x2874 %08x->%08x\n", + yi->reg_2874, reg_2874); + + write_reg(reg_2870, 0x02870); + IVTV_DEBUG_YUV("Update reg 0x2870 %08x->%08x\n", + yi->reg_2870, reg_2870); + + write_reg(reg_2890, 0x02890); + IVTV_DEBUG_YUV("Update reg 0x2890 %08x->%08x\n", + yi->reg_2890, reg_2890); + + /* Only update the filter if we really need to */ + if (h_filter != yi->h_filter) { + ivtv_yuv_filter(itv, h_filter, -1, -1); + yi->h_filter = h_filter; + } +} + +static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + u32 master_height; + u32 reg_2918, reg_291c, reg_2920, reg_2928; + u32 reg_2930, reg_2934, reg_293c; + u32 reg_2940, reg_2944, reg_294c; + u32 reg_2950, reg_2954, reg_2958, reg_295c; + u32 reg_2960, reg_2964, reg_2968, reg_296c; + u32 reg_289c; + u32 src_major_y, src_minor_y; + u32 src_major_uv, src_minor_uv; + u32 reg_2964_base, reg_2968_base; + int v_filter_1, v_filter_2; + + IVTV_DEBUG_WARN + ("Adjust to height %d src_h %d dst_h %d src_y %d dst_y %d\n", + f->tru_h, f->src_h, f->dst_h, f->src_y, f->dst_y); + + /* What scaling mode is being used... */ + IVTV_DEBUG_YUV("Scaling mode Y: %s\n", + f->interlaced_y ? "Interlaced" : "Progressive"); + + IVTV_DEBUG_YUV("Scaling mode UV: %s\n", + f->interlaced_uv ? "Interlaced" : "Progressive"); + + /* What is the source video being treated as... */ + IVTV_DEBUG_WARN("Source video: %s\n", + f->interlaced ? "Interlaced" : "Progressive"); + + /* We offset into the image using two different index methods, so split + the y source coord into two parts. */ + if (f->src_y < 8) { + src_minor_uv = f->src_y; + src_major_uv = 0; + } else { + src_minor_uv = 8; + src_major_uv = f->src_y - 8; + } + + src_minor_y = src_minor_uv; + src_major_y = src_major_uv; + + if (f->offset_y) + src_minor_y += 16; + + if (f->interlaced_y) + reg_2918 = (f->dst_h << 16) | (f->src_h + src_minor_y); + else + reg_2918 = (f->dst_h << 16) | ((f->src_h + src_minor_y) << 1); + + if (f->interlaced_uv) + reg_291c = (f->dst_h << 16) | ((f->src_h + src_minor_uv) >> 1); + else + reg_291c = (f->dst_h << 16) | (f->src_h + src_minor_uv); + + reg_2964_base = (src_minor_y * ((f->dst_h << 16) / f->src_h)) >> 14; + reg_2968_base = (src_minor_uv * ((f->dst_h << 16) / f->src_h)) >> 14; + + if (f->dst_h / 2 >= f->src_h && !f->interlaced_y) { + master_height = (f->src_h * 0x00400000) / f->dst_h; + if ((f->src_h * 0x00400000) - (master_height * f->dst_h) >= f->dst_h / 2) + master_height++; + reg_2920 = master_height >> 2; + reg_2928 = master_height >> 3; + reg_2930 = master_height; + reg_2940 = master_height >> 1; + reg_2964_base >>= 3; + reg_2968_base >>= 3; + reg_296c = 0x00000000; + } else if (f->dst_h >= f->src_h) { + master_height = (f->src_h * 0x00400000) / f->dst_h; + master_height = (master_height >> 1) + (master_height & 1); + reg_2920 = master_height >> 2; + reg_2928 = master_height >> 2; + reg_2930 = master_height; + reg_2940 = master_height >> 1; + reg_296c = 0x00000000; + if (f->interlaced_y) { + reg_2964_base >>= 3; + } else { + reg_296c++; + reg_2964_base >>= 2; + } + if (f->interlaced_uv) + reg_2928 >>= 1; + reg_2968_base >>= 3; + } else if (f->dst_h >= f->src_h / 2) { + master_height = (f->src_h * 0x00200000) / f->dst_h; + master_height = (master_height >> 1) + (master_height & 1); + reg_2920 = master_height >> 2; + reg_2928 = master_height >> 2; + reg_2930 = master_height; + reg_2940 = master_height; + reg_296c = 0x00000101; + if (f->interlaced_y) { + reg_2964_base >>= 2; + } else { + reg_296c++; + reg_2964_base >>= 1; + } + if (f->interlaced_uv) + reg_2928 >>= 1; + reg_2968_base >>= 2; + } else { + master_height = (f->src_h * 0x00100000) / f->dst_h; + master_height = (master_height >> 1) + (master_height & 1); + reg_2920 = master_height >> 2; + reg_2928 = master_height >> 2; + reg_2930 = master_height; + reg_2940 = master_height; + reg_2964_base >>= 1; + reg_2968_base >>= 2; + reg_296c = 0x00000102; + } + + /* FIXME These registers change depending on scaled / unscaled output + We really need to work out what they should be */ + if (f->src_h == f->dst_h) { + reg_2934 = 0x00020000; + reg_293c = 0x00100000; + reg_2944 = 0x00040000; + reg_294c = 0x000b0000; + } else { + reg_2934 = 0x00000FF0; + reg_293c = 0x00000FF0; + reg_2944 = 0x00000FF0; + reg_294c = 0x00000FF0; + } + + /* The first line to be displayed */ + reg_2950 = 0x00010000 + src_major_y; + if (f->interlaced_y) + reg_2950 += 0x00010000; + reg_2954 = reg_2950 + 1; + + reg_2958 = 0x00010000 + (src_major_y >> 1); + if (f->interlaced_uv) + reg_2958 += 0x00010000; + reg_295c = reg_2958 + 1; + + if (yi->decode_height == 480) + reg_289c = 0x011e0017; + else + reg_289c = 0x01500017; + + if (f->dst_y < 0) + reg_289c = (reg_289c - ((f->dst_y & ~1)<<15))-(f->dst_y >>1); + else + reg_289c = (reg_289c + ((f->dst_y & ~1)<<15))+(f->dst_y >>1); + + /* How much of the source to decode. + Take into account the source offset */ + reg_2960 = ((src_minor_y + f->src_h + src_major_y) - 1) | + (((src_minor_uv + f->src_h + src_major_uv - 1) & ~1) << 15); + + /* Calculate correct value for register 2964 */ + if (f->src_h == f->dst_h) { + reg_2964 = 1; + } else { + reg_2964 = 2 + ((f->dst_h << 1) / f->src_h); + reg_2964 = (reg_2964 >> 1) + (reg_2964 & 1); + } + reg_2968 = (reg_2964 << 16) + reg_2964 + (reg_2964 >> 1); + reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94); + + /* Okay, we've wasted time working out the correct value, + but if we use it, it fouls the the window alignment. + Fudge it to what we want... */ + reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16)); + reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16)); + + /* Deviate further from what it should be. I find the flicker headache + inducing so try to reduce it slightly. Leave 2968 as-is otherwise + colours foul. */ + if ((reg_2964 != 0x00010001) && (f->dst_h / 2 <= f->src_h)) + reg_2964 = (reg_2964 & 0xFFFF0000) + ((reg_2964 & 0x0000FFFF) / 2); + + if (!f->interlaced_y) + reg_2964 -= 0x00010001; + if (!f->interlaced_uv) + reg_2968 -= 0x00010001; + + reg_2964 += ((reg_2964_base << 16) | reg_2964_base); + reg_2968 += ((reg_2968_base << 16) | reg_2968_base); + + /* Select the vertical filter */ + if (f->src_h == f->dst_h) { + /* An exact size match uses filter 0/1 */ + v_filter_1 = 0; + v_filter_2 = 1; + } else { + /* Figure out which filter to use */ + v_filter_1 = ((f->src_h << 16) / f->dst_h) >> 15; + v_filter_1 = (v_filter_1 >> 1) + (v_filter_1 & 1); + /* Only an exact size match can use filter 0 */ + v_filter_1 += !v_filter_1; + v_filter_2 = v_filter_1; + } + + write_reg(reg_2934, 0x02934); + write_reg(reg_293c, 0x0293c); + IVTV_DEBUG_YUV("Update reg 0x2934 %08x->%08x 0x293c %08x->%08x\n", + yi->reg_2934, reg_2934, yi->reg_293c, reg_293c); + write_reg(reg_2944, 0x02944); + write_reg(reg_294c, 0x0294c); + IVTV_DEBUG_YUV("Update reg 0x2944 %08x->%08x 0x294c %08x->%08x\n", + yi->reg_2944, reg_2944, yi->reg_294c, reg_294c); + + /* Ensure 2970 is 0 (does it ever change ?) */ +/* write_reg(0,0x02970); */ +/* IVTV_DEBUG_YUV("Update reg 0x2970 %08x->%08x\n", yi->reg_2970, 0); */ + + write_reg(reg_2930, 0x02938); + write_reg(reg_2930, 0x02930); + IVTV_DEBUG_YUV("Update reg 0x2930 %08x->%08x 0x2938 %08x->%08x\n", + yi->reg_2930, reg_2930, yi->reg_2938, reg_2930); + + write_reg(reg_2928, 0x02928); + write_reg(reg_2928 + 0x514, 0x0292C); + IVTV_DEBUG_YUV("Update reg 0x2928 %08x->%08x 0x292c %08x->%08x\n", + yi->reg_2928, reg_2928, yi->reg_292c, reg_2928 + 0x514); + + write_reg(reg_2920, 0x02920); + write_reg(reg_2920 + 0x514, 0x02924); + IVTV_DEBUG_YUV("Update reg 0x2920 %08x->%08x 0x2924 %08x->%08x\n", + yi->reg_2920, reg_2920, yi->reg_2924, reg_2920 + 0x514); + + write_reg(reg_2918, 0x02918); + write_reg(reg_291c, 0x0291C); + IVTV_DEBUG_YUV("Update reg 0x2918 %08x->%08x 0x291C %08x->%08x\n", + yi->reg_2918, reg_2918, yi->reg_291c, reg_291c); + + write_reg(reg_296c, 0x0296c); + IVTV_DEBUG_YUV("Update reg 0x296c %08x->%08x\n", + yi->reg_296c, reg_296c); + + write_reg(reg_2940, 0x02948); + write_reg(reg_2940, 0x02940); + IVTV_DEBUG_YUV("Update reg 0x2940 %08x->%08x 0x2948 %08x->%08x\n", + yi->reg_2940, reg_2940, yi->reg_2948, reg_2940); + + write_reg(reg_2950, 0x02950); + write_reg(reg_2954, 0x02954); + IVTV_DEBUG_YUV("Update reg 0x2950 %08x->%08x 0x2954 %08x->%08x\n", + yi->reg_2950, reg_2950, yi->reg_2954, reg_2954); + + write_reg(reg_2958, 0x02958); + write_reg(reg_295c, 0x0295C); + IVTV_DEBUG_YUV("Update reg 0x2958 %08x->%08x 0x295C %08x->%08x\n", + yi->reg_2958, reg_2958, yi->reg_295c, reg_295c); + + write_reg(reg_2960, 0x02960); + IVTV_DEBUG_YUV("Update reg 0x2960 %08x->%08x \n", + yi->reg_2960, reg_2960); + + write_reg(reg_2964, 0x02964); + write_reg(reg_2968, 0x02968); + IVTV_DEBUG_YUV("Update reg 0x2964 %08x->%08x 0x2968 %08x->%08x\n", + yi->reg_2964, reg_2964, yi->reg_2968, reg_2968); + + write_reg(reg_289c, 0x0289c); + IVTV_DEBUG_YUV("Update reg 0x289c %08x->%08x\n", + yi->reg_289c, reg_289c); + + /* Only update filter 1 if we really need to */ + if (v_filter_1 != yi->v_filter_1) { + ivtv_yuv_filter(itv, -1, v_filter_1, -1); + yi->v_filter_1 = v_filter_1; + } + + /* Only update filter 2 if we really need to */ + if (v_filter_2 != yi->v_filter_2) { + ivtv_yuv_filter(itv, -1, -1, v_filter_2); + yi->v_filter_2 = v_filter_2; + } +} + +/* Modify the supplied coordinate information to fit the visible osd area */ +static u32 ivtv_yuv_window_setup(struct ivtv *itv, struct yuv_frame_info *f) +{ + struct yuv_frame_info *of = &itv->yuv_info.old_frame_info; + int osd_crop; + u32 osd_scale; + u32 yuv_update = 0; + + /* Sorry, but no negative coords for src */ + if (f->src_x < 0) + f->src_x = 0; + if (f->src_y < 0) + f->src_y = 0; + + /* Can only reduce width down to 1/4 original size */ + if ((osd_crop = f->src_w - 4 * f->dst_w) > 0) { + f->src_x += osd_crop / 2; + f->src_w = (f->src_w - osd_crop) & ~3; + f->dst_w = f->src_w / 4; + f->dst_w += f->dst_w & 1; + } + + /* Can only reduce height down to 1/4 original size */ + if (f->src_h / f->dst_h >= 2) { + /* Overflow may be because we're running progressive, + so force mode switch */ + f->interlaced_y = 1; + /* Make sure we're still within limits for interlace */ + if ((osd_crop = f->src_h - 4 * f->dst_h) > 0) { + /* If we reach here we'll have to force the height. */ + f->src_y += osd_crop / 2; + f->src_h = (f->src_h - osd_crop) & ~3; + f->dst_h = f->src_h / 4; + f->dst_h += f->dst_h & 1; + } + } + + /* If there's nothing to safe to display, we may as well stop now */ + if ((int)f->dst_w <= 2 || (int)f->dst_h <= 2 || + (int)f->src_w <= 2 || (int)f->src_h <= 2) { + return IVTV_YUV_UPDATE_INVALID; + } + + /* Ensure video remains inside OSD area */ + osd_scale = (f->src_h << 16) / f->dst_h; + + if ((osd_crop = f->pan_y - f->dst_y) > 0) { + /* Falls off the upper edge - crop */ + f->src_y += (osd_scale * osd_crop) >> 16; + f->src_h -= (osd_scale * osd_crop) >> 16; + f->dst_h -= osd_crop; + f->dst_y = 0; + } else { + f->dst_y -= f->pan_y; + } + + if ((osd_crop = f->dst_h + f->dst_y - f->vis_h) > 0) { + /* Falls off the lower edge - crop */ + f->dst_h -= osd_crop; + f->src_h -= (osd_scale * osd_crop) >> 16; + } + + osd_scale = (f->src_w << 16) / f->dst_w; + + if ((osd_crop = f->pan_x - f->dst_x) > 0) { + /* Fall off the left edge - crop */ + f->src_x += (osd_scale * osd_crop) >> 16; + f->src_w -= (osd_scale * osd_crop) >> 16; + f->dst_w -= osd_crop; + f->dst_x = 0; + } else { + f->dst_x -= f->pan_x; + } + + if ((osd_crop = f->dst_w + f->dst_x - f->vis_w) > 0) { + /* Falls off the right edge - crop */ + f->dst_w -= osd_crop; + f->src_w -= (osd_scale * osd_crop) >> 16; + } + + if (itv->yuv_info.track_osd) { + /* The OSD can be moved. Track to it */ + f->dst_x += itv->yuv_info.osd_x_offset; + f->dst_y += itv->yuv_info.osd_y_offset; + } + + /* Width & height for both src & dst must be even. + Same for coordinates. */ + f->dst_w &= ~1; + f->dst_x &= ~1; + + f->src_w += f->src_x & 1; + f->src_x &= ~1; + + f->src_w &= ~1; + f->dst_w &= ~1; + + f->dst_h &= ~1; + f->dst_y &= ~1; + + f->src_h += f->src_y & 1; + f->src_y &= ~1; + + f->src_h &= ~1; + f->dst_h &= ~1; + + /* Due to rounding, we may have reduced the output size to <1/4 of + the source. Check again, but this time just resize. Don't change + source coordinates */ + if (f->dst_w < f->src_w / 4) { + f->src_w &= ~3; + f->dst_w = f->src_w / 4; + f->dst_w += f->dst_w & 1; + } + if (f->dst_h < f->src_h / 4) { + f->src_h &= ~3; + f->dst_h = f->src_h / 4; + f->dst_h += f->dst_h & 1; + } + + /* Check again. If there's nothing to safe to display, stop now */ + if ((int)f->dst_w <= 2 || (int)f->dst_h <= 2 || + (int)f->src_w <= 2 || (int)f->src_h <= 2) { + return IVTV_YUV_UPDATE_INVALID; + } + + /* Both x offset & width are linked, so they have to be done together */ + if ((of->dst_w != f->dst_w) || (of->src_w != f->src_w) || + (of->dst_x != f->dst_x) || (of->src_x != f->src_x) || + (of->pan_x != f->pan_x) || (of->vis_w != f->vis_w)) { + yuv_update |= IVTV_YUV_UPDATE_HORIZONTAL; + } + + if ((of->src_h != f->src_h) || (of->dst_h != f->dst_h) || + (of->dst_y != f->dst_y) || (of->src_y != f->src_y) || + (of->pan_y != f->pan_y) || (of->vis_h != f->vis_h) || + (of->lace_mode != f->lace_mode) || + (of->interlaced_y != f->interlaced_y) || + (of->interlaced_uv != f->interlaced_uv)) { + yuv_update |= IVTV_YUV_UPDATE_VERTICAL; + } + + return yuv_update; +} + +/* Update the scaling register to the requested value */ +void ivtv_yuv_work_handler(struct ivtv *itv) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + struct yuv_frame_info f; + int frame = yi->update_frame; + u32 yuv_update; + + IVTV_DEBUG_YUV("Update yuv registers for frame %d\n", frame); + f = yi->new_frame_info[frame]; + + if (yi->track_osd) { + /* Snapshot the osd pan info */ + f.pan_x = yi->osd_x_pan; + f.pan_y = yi->osd_y_pan; + f.vis_w = yi->osd_vis_w; + f.vis_h = yi->osd_vis_h; + } else { + /* Not tracking the osd, so assume full screen */ + f.pan_x = 0; + f.pan_y = 0; + f.vis_w = 720; + f.vis_h = yi->decode_height; + } + + /* Calculate the display window coordinates. Exit if nothing left */ + if (!(yuv_update = ivtv_yuv_window_setup(itv, &f))) + return; + + if (yuv_update & IVTV_YUV_UPDATE_INVALID) { + write_reg(0x01008080, 0x2898); + } else if (yuv_update) { + write_reg(0x00108080, 0x2898); + + if (yuv_update & IVTV_YUV_UPDATE_HORIZONTAL) + ivtv_yuv_handle_horizontal(itv, &f); + + if (yuv_update & IVTV_YUV_UPDATE_VERTICAL) + ivtv_yuv_handle_vertical(itv, &f); + } + yi->old_frame_info = f; +} + +static void ivtv_yuv_init(struct ivtv *itv) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + + IVTV_DEBUG_YUV("ivtv_yuv_init\n"); + + /* Take a snapshot of the current register settings */ + yi->reg_2834 = read_reg(0x02834); + yi->reg_2838 = read_reg(0x02838); + yi->reg_283c = read_reg(0x0283c); + yi->reg_2840 = read_reg(0x02840); + yi->reg_2844 = read_reg(0x02844); + yi->reg_2848 = read_reg(0x02848); + yi->reg_2854 = read_reg(0x02854); + yi->reg_285c = read_reg(0x0285c); + yi->reg_2864 = read_reg(0x02864); + yi->reg_2870 = read_reg(0x02870); + yi->reg_2874 = read_reg(0x02874); + yi->reg_2898 = read_reg(0x02898); + yi->reg_2890 = read_reg(0x02890); + + yi->reg_289c = read_reg(0x0289c); + yi->reg_2918 = read_reg(0x02918); + yi->reg_291c = read_reg(0x0291c); + yi->reg_2920 = read_reg(0x02920); + yi->reg_2924 = read_reg(0x02924); + yi->reg_2928 = read_reg(0x02928); + yi->reg_292c = read_reg(0x0292c); + yi->reg_2930 = read_reg(0x02930); + yi->reg_2934 = read_reg(0x02934); + yi->reg_2938 = read_reg(0x02938); + yi->reg_293c = read_reg(0x0293c); + yi->reg_2940 = read_reg(0x02940); + yi->reg_2944 = read_reg(0x02944); + yi->reg_2948 = read_reg(0x02948); + yi->reg_294c = read_reg(0x0294c); + yi->reg_2950 = read_reg(0x02950); + yi->reg_2954 = read_reg(0x02954); + yi->reg_2958 = read_reg(0x02958); + yi->reg_295c = read_reg(0x0295c); + yi->reg_2960 = read_reg(0x02960); + yi->reg_2964 = read_reg(0x02964); + yi->reg_2968 = read_reg(0x02968); + yi->reg_296c = read_reg(0x0296c); + yi->reg_2970 = read_reg(0x02970); + + yi->v_filter_1 = -1; + yi->v_filter_2 = -1; + yi->h_filter = -1; + + /* Set some valid size info */ + yi->osd_x_offset = read_reg(0x02a04) & 0x00000FFF; + yi->osd_y_offset = (read_reg(0x02a04) >> 16) & 0x00000FFF; + + /* Bit 2 of reg 2878 indicates current decoder output format + 0 : NTSC 1 : PAL */ + if (read_reg(0x2878) & 4) + yi->decode_height = 576; + else + yi->decode_height = 480; + + if (!itv->osd_info) { + yi->osd_vis_w = 720 - yi->osd_x_offset; + yi->osd_vis_h = yi->decode_height - yi->osd_y_offset; + } else { + /* If no visible size set, assume full size */ + if (!yi->osd_vis_w) + yi->osd_vis_w = 720 - yi->osd_x_offset; + + if (!yi->osd_vis_h) { + yi->osd_vis_h = yi->decode_height - yi->osd_y_offset; + } else if (yi->osd_vis_h + yi->osd_y_offset > yi->decode_height) { + /* If output video standard has changed, requested height may + not be legal */ + IVTV_DEBUG_WARN("Clipping yuv output - fb size (%d) exceeds video standard limit (%d)\n", + yi->osd_vis_h + yi->osd_y_offset, + yi->decode_height); + yi->osd_vis_h = yi->decode_height - yi->osd_y_offset; + } + } + + /* We need a buffer for blanking when Y plane is offset - non-fatal if we can't get one */ + yi->blanking_ptr = kzalloc(720 * 16, GFP_KERNEL|__GFP_NOWARN); + if (yi->blanking_ptr) { + yi->blanking_dmaptr = pci_map_single(itv->pdev, yi->blanking_ptr, 720*16, PCI_DMA_TODEVICE); + } else { + yi->blanking_dmaptr = 0; + IVTV_DEBUG_WARN("Failed to allocate yuv blanking buffer\n"); + } + + /* Enable YUV decoder output */ + write_reg_sync(0x01, IVTV_REG_VDM); + + set_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags); + atomic_set(&yi->next_dma_frame, 0); +} + +/* Get next available yuv buffer on PVR350 */ +static void ivtv_yuv_next_free(struct ivtv *itv) +{ + int draw, display; + struct yuv_playback_info *yi = &itv->yuv_info; + + if (atomic_read(&yi->next_dma_frame) == -1) + ivtv_yuv_init(itv); + + draw = atomic_read(&yi->next_fill_frame); + display = atomic_read(&yi->next_dma_frame); + + if (display > draw) + display -= IVTV_YUV_BUFFERS; + + if (draw - display >= yi->max_frames_buffered) + draw = (u8)(draw - 1) % IVTV_YUV_BUFFERS; + else + yi->new_frame_info[draw].update = 0; + + yi->draw_frame = draw; +} + +/* Set up frame according to ivtv_dma_frame parameters */ +static void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + u8 frame = yi->draw_frame; + u8 last_frame = (u8)(frame - 1) % IVTV_YUV_BUFFERS; + struct yuv_frame_info *nf = &yi->new_frame_info[frame]; + struct yuv_frame_info *of = &yi->new_frame_info[last_frame]; + int lace_threshold = yi->lace_threshold; + + /* Preserve old update flag in case we're overwriting a queued frame */ + int update = nf->update; + + /* Take a snapshot of the yuv coordinate information */ + nf->src_x = args->src.left; + nf->src_y = args->src.top; + nf->src_w = args->src.width; + nf->src_h = args->src.height; + nf->dst_x = args->dst.left; + nf->dst_y = args->dst.top; + nf->dst_w = args->dst.width; + nf->dst_h = args->dst.height; + nf->tru_x = args->dst.left; + nf->tru_w = args->src_width; + nf->tru_h = args->src_height; + + /* Are we going to offset the Y plane */ + nf->offset_y = (nf->tru_h + nf->src_x < 512 - 16) ? 1 : 0; + + nf->update = 0; + nf->interlaced_y = 0; + nf->interlaced_uv = 0; + nf->delay = 0; + nf->sync_field = 0; + nf->lace_mode = yi->lace_mode & IVTV_YUV_MODE_MASK; + + if (lace_threshold < 0) + lace_threshold = yi->decode_height - 1; + + /* Work out the lace settings */ + switch (nf->lace_mode) { + case IVTV_YUV_MODE_PROGRESSIVE: /* Progressive mode */ + nf->interlaced = 0; + if (nf->tru_h < 512 || (nf->tru_h > 576 && nf->tru_h < 1021)) + nf->interlaced_y = 0; + else + nf->interlaced_y = 1; + + if (nf->tru_h < 1021 && (nf->dst_h >= nf->src_h / 2)) + nf->interlaced_uv = 0; + else + nf->interlaced_uv = 1; + break; + + case IVTV_YUV_MODE_AUTO: + if (nf->tru_h <= lace_threshold || nf->tru_h > 576 || nf->tru_w > 720) { + nf->interlaced = 0; + if ((nf->tru_h < 512) || + (nf->tru_h > 576 && nf->tru_h < 1021) || + (nf->tru_w > 720 && nf->tru_h < 1021)) + nf->interlaced_y = 0; + else + nf->interlaced_y = 1; + if (nf->tru_h < 1021 && (nf->dst_h >= nf->src_h / 2)) + nf->interlaced_uv = 0; + else + nf->interlaced_uv = 1; + } else { + nf->interlaced = 1; + nf->interlaced_y = 1; + nf->interlaced_uv = 1; + } + break; + + case IVTV_YUV_MODE_INTERLACED: /* Interlace mode */ + default: + nf->interlaced = 1; + nf->interlaced_y = 1; + nf->interlaced_uv = 1; + break; + } + + if (memcmp(&yi->old_frame_info_args, nf, sizeof(*nf))) { + yi->old_frame_info_args = *nf; + nf->update = 1; + IVTV_DEBUG_YUV("Requesting reg update for frame %d\n", frame); + } + + nf->update |= update; + nf->sync_field = yi->lace_sync_field; + nf->delay = nf->sync_field != of->sync_field; +} + +/* Frame is complete & ready for display */ +void ivtv_yuv_frame_complete(struct ivtv *itv) +{ + atomic_set(&itv->yuv_info.next_fill_frame, + (itv->yuv_info.draw_frame + 1) % IVTV_YUV_BUFFERS); +} + +static int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +{ + DEFINE_WAIT(wait); + int rc = 0; + int got_sig = 0; + /* DMA the frame */ + mutex_lock(&itv->udma.lock); + + if ((rc = ivtv_yuv_prep_user_dma(itv, &itv->udma, args)) != 0) { + mutex_unlock(&itv->udma.lock); + return rc; + } + + ivtv_udma_prepare(itv); + prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); + /* if no UDMA is pending and no UDMA is in progress, then the DMA + is finished */ + while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) || + test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { + /* don't interrupt if the DMA is in progress but break off + a still pending DMA. */ + got_sig = signal_pending(current); + if (got_sig && test_and_clear_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags)) + break; + got_sig = 0; + schedule(); + } + finish_wait(&itv->dma_waitq, &wait); + + /* Unmap Last DMA Xfer */ + ivtv_udma_unmap(itv); + + if (got_sig) { + IVTV_DEBUG_INFO("User stopped YUV UDMA\n"); + mutex_unlock(&itv->udma.lock); + return -EINTR; + } + + ivtv_yuv_frame_complete(itv); + + mutex_unlock(&itv->udma.lock); + return rc; +} + +/* Setup frame according to V4L2 parameters */ +void ivtv_yuv_setup_stream_frame(struct ivtv *itv) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + struct ivtv_dma_frame dma_args; + + ivtv_yuv_next_free(itv); + + /* Copy V4L2 parameters to an ivtv_dma_frame struct... */ + dma_args.y_source = NULL; + dma_args.uv_source = NULL; + dma_args.src.left = 0; + dma_args.src.top = 0; + dma_args.src.width = yi->v4l2_src_w; + dma_args.src.height = yi->v4l2_src_h; + dma_args.dst = yi->main_rect; + dma_args.src_width = yi->v4l2_src_w; + dma_args.src_height = yi->v4l2_src_h; + + /* ... and use the same setup routine as ivtv_yuv_prep_frame */ + ivtv_yuv_setup_frame(itv, &dma_args); + + if (!itv->dma_data_req_offset) + itv->dma_data_req_offset = yuv_offset[yi->draw_frame]; +} + +/* Attempt to dma a frame from a user buffer */ +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + struct ivtv_dma_frame dma_args; + int res; + + ivtv_yuv_setup_stream_frame(itv); + + /* We only need to supply source addresses for this */ + dma_args.y_source = src; + dma_args.uv_source = src + 720 * ((yi->v4l2_src_h + 31) & ~31); + /* Wait for frame DMA. Note that serialize_lock is locked, + so to allow other processes to access the driver while + we are waiting unlock first and later lock again. */ + mutex_unlock(&itv->serialize_lock); + res = ivtv_yuv_udma_frame(itv, &dma_args); + mutex_lock(&itv->serialize_lock); + return res; +} + +/* IVTV_IOC_DMA_FRAME ioctl handler */ +int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +{ + int res; + +/* IVTV_DEBUG_INFO("yuv_prep_frame\n"); */ + ivtv_yuv_next_free(itv); + ivtv_yuv_setup_frame(itv, args); + /* Wait for frame DMA. Note that serialize_lock is locked, + so to allow other processes to access the driver while + we are waiting unlock first and later lock again. */ + mutex_unlock(&itv->serialize_lock); + res = ivtv_yuv_udma_frame(itv, args); + mutex_lock(&itv->serialize_lock); + return res; +} + +void ivtv_yuv_close(struct ivtv *itv) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + int h_filter, v_filter_1, v_filter_2; + + IVTV_DEBUG_YUV("ivtv_yuv_close\n"); + mutex_unlock(&itv->serialize_lock); + ivtv_waitq(&itv->vsync_waitq); + mutex_lock(&itv->serialize_lock); + + yi->running = 0; + atomic_set(&yi->next_dma_frame, -1); + atomic_set(&yi->next_fill_frame, 0); + + /* Reset registers we have changed so mpeg playback works */ + + /* If we fully restore this register, the display may remain active. + Restore, but set one bit to blank the video. Firmware will always + clear this bit when needed, so not a problem. */ + write_reg(yi->reg_2898 | 0x01000000, 0x2898); + + write_reg(yi->reg_2834, 0x02834); + write_reg(yi->reg_2838, 0x02838); + write_reg(yi->reg_283c, 0x0283c); + write_reg(yi->reg_2840, 0x02840); + write_reg(yi->reg_2844, 0x02844); + write_reg(yi->reg_2848, 0x02848); + write_reg(yi->reg_2854, 0x02854); + write_reg(yi->reg_285c, 0x0285c); + write_reg(yi->reg_2864, 0x02864); + write_reg(yi->reg_2870, 0x02870); + write_reg(yi->reg_2874, 0x02874); + write_reg(yi->reg_2890, 0x02890); + write_reg(yi->reg_289c, 0x0289c); + + write_reg(yi->reg_2918, 0x02918); + write_reg(yi->reg_291c, 0x0291c); + write_reg(yi->reg_2920, 0x02920); + write_reg(yi->reg_2924, 0x02924); + write_reg(yi->reg_2928, 0x02928); + write_reg(yi->reg_292c, 0x0292c); + write_reg(yi->reg_2930, 0x02930); + write_reg(yi->reg_2934, 0x02934); + write_reg(yi->reg_2938, 0x02938); + write_reg(yi->reg_293c, 0x0293c); + write_reg(yi->reg_2940, 0x02940); + write_reg(yi->reg_2944, 0x02944); + write_reg(yi->reg_2948, 0x02948); + write_reg(yi->reg_294c, 0x0294c); + write_reg(yi->reg_2950, 0x02950); + write_reg(yi->reg_2954, 0x02954); + write_reg(yi->reg_2958, 0x02958); + write_reg(yi->reg_295c, 0x0295c); + write_reg(yi->reg_2960, 0x02960); + write_reg(yi->reg_2964, 0x02964); + write_reg(yi->reg_2968, 0x02968); + write_reg(yi->reg_296c, 0x0296c); + write_reg(yi->reg_2970, 0x02970); + + /* Prepare to restore filters */ + + /* First the horizontal filter */ + if ((yi->reg_2834 & 0x0000FFFF) == (yi->reg_2834 >> 16)) { + /* An exact size match uses filter 0 */ + h_filter = 0; + } else { + /* Figure out which filter to use */ + h_filter = ((yi->reg_2834 << 16) / (yi->reg_2834 >> 16)) >> 15; + h_filter = (h_filter >> 1) + (h_filter & 1); + /* Only an exact size match can use filter 0. */ + h_filter += !h_filter; + } + + /* Now the vertical filter */ + if ((yi->reg_2918 & 0x0000FFFF) == (yi->reg_2918 >> 16)) { + /* An exact size match uses filter 0/1 */ + v_filter_1 = 0; + v_filter_2 = 1; + } else { + /* Figure out which filter to use */ + v_filter_1 = ((yi->reg_2918 << 16) / (yi->reg_2918 >> 16)) >> 15; + v_filter_1 = (v_filter_1 >> 1) + (v_filter_1 & 1); + /* Only an exact size match can use filter 0 */ + v_filter_1 += !v_filter_1; + v_filter_2 = v_filter_1; + } + + /* Now restore the filters */ + ivtv_yuv_filter(itv, h_filter, v_filter_1, v_filter_2); + + /* and clear a few registers */ + write_reg(0, 0x02814); + write_reg(0, 0x0282c); + write_reg(0, 0x02904); + write_reg(0, 0x02910); + + /* Release the blanking buffer */ + if (yi->blanking_ptr) { + kfree(yi->blanking_ptr); + yi->blanking_ptr = NULL; + pci_unmap_single(itv->pdev, yi->blanking_dmaptr, 720*16, PCI_DMA_TODEVICE); + } + + /* Invalidate the old dimension information */ + yi->old_frame_info.src_w = 0; + yi->old_frame_info.src_h = 0; + yi->old_frame_info_args.src_w = 0; + yi->old_frame_info_args.src_h = 0; + + /* All done. */ + clear_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags); +} diff --git a/drivers/media/pci/ivtv/ivtv-yuv.h b/drivers/media/pci/ivtv/ivtv-yuv.h new file mode 100644 index 00000000..ca5173fb --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-yuv.h @@ -0,0 +1,44 @@ +/* + yuv support + + Copyright (C) 2007 Ian Armstrong + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef IVTV_YUV_H +#define IVTV_YUV_H + +#define IVTV_YUV_BUFFER_UV_OFFSET 0x65400 /* Offset to UV Buffer */ + +/* Offset to filter table in firmware */ +#define IVTV_YUV_HORIZONTAL_FILTER_OFFSET 0x025d8 +#define IVTV_YUV_VERTICAL_FILTER_OFFSET 0x03358 + +#define IVTV_YUV_UPDATE_HORIZONTAL 0x01 +#define IVTV_YUV_UPDATE_VERTICAL 0x02 +#define IVTV_YUV_UPDATE_INVALID 0x04 + +extern const u32 yuv_offset[IVTV_YUV_BUFFERS]; + +int ivtv_yuv_filter_check(struct ivtv *itv); +void ivtv_yuv_setup_stream_frame(struct ivtv *itv); +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src); +void ivtv_yuv_frame_complete(struct ivtv *itv); +int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args); +void ivtv_yuv_close(struct ivtv *itv); +void ivtv_yuv_work_handler(struct ivtv *itv); + +#endif diff --git a/drivers/media/pci/ivtv/ivtvfb.c b/drivers/media/pci/ivtv/ivtvfb.c new file mode 100644 index 00000000..9ff12301 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtvfb.c @@ -0,0 +1,1316 @@ +/* + On Screen Display cx23415 Framebuffer driver + + This module presents the cx23415 OSD (onscreen display) framebuffer memory + as a standard Linux /dev/fb style framebuffer device. The framebuffer has + support for 8, 16 & 32 bpp packed pixel formats with alpha channel. In 16bpp + mode, there is a choice of a three color depths (12, 15 or 16 bits), but no + local alpha. The colorspace is selectable between rgb & yuv. + Depending on the TV standard configured in the ivtv module at load time, + the initial resolution is either 640x400 (NTSC) or 640x480 (PAL) at 8bpp. + Video timings are locked to ensure a vertical refresh rate of 50Hz (PAL) + or 59.94 (NTSC) + + Copyright (c) 2003 Matt T. Yourst + + Derived from drivers/video/vesafb.c + Portions (c) 1998 Gerd Knorr + + 2.6 kernel port: + Copyright (C) 2004 Matthias Badaire + + Copyright (C) 2004 Chris Kennedy + + Copyright (C) 2006 Ian Armstrong + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#ifdef CONFIG_MTRR +#include +#endif + +#include "ivtv-driver.h" +#include "ivtv-cards.h" +#include "ivtv-i2c.h" +#include "ivtv-udma.h" +#include "ivtv-mailbox.h" +#include "ivtv-firmware.h" + +/* card parameters */ +static int ivtvfb_card_id = -1; +static int ivtvfb_debug = 0; +static bool osd_laced; +static int osd_depth; +static int osd_upper; +static int osd_left; +static int osd_yres; +static int osd_xres; + +module_param(ivtvfb_card_id, int, 0444); +module_param_named(debug,ivtvfb_debug, int, 0644); +module_param(osd_laced, bool, 0444); +module_param(osd_depth, int, 0444); +module_param(osd_upper, int, 0444); +module_param(osd_left, int, 0444); +module_param(osd_yres, int, 0444); +module_param(osd_xres, int, 0444); + +MODULE_PARM_DESC(ivtvfb_card_id, + "Only use framebuffer of the specified ivtv card (0-31)\n" + "\t\t\tdefault -1: initialize all available framebuffers"); + +MODULE_PARM_DESC(debug, + "Debug level (bitmask). Default: errors only\n" + "\t\t\t(debug = 3 gives full debugging)"); + +/* Why upper, left, xres, yres, depth, laced ? To match terminology used + by fbset. + Why start at 1 for left & upper coordinate ? Because X doesn't allow 0 */ + +MODULE_PARM_DESC(osd_laced, + "Interlaced mode\n" + "\t\t\t0=off\n" + "\t\t\t1=on\n" + "\t\t\tdefault off"); + +MODULE_PARM_DESC(osd_depth, + "Bits per pixel - 8, 16, 32\n" + "\t\t\tdefault 8"); + +MODULE_PARM_DESC(osd_upper, + "Vertical start position\n" + "\t\t\tdefault 0 (Centered)"); + +MODULE_PARM_DESC(osd_left, + "Horizontal start position\n" + "\t\t\tdefault 0 (Centered)"); + +MODULE_PARM_DESC(osd_yres, + "Display height\n" + "\t\t\tdefault 480 (PAL)\n" + "\t\t\t 400 (NTSC)"); + +MODULE_PARM_DESC(osd_xres, + "Display width\n" + "\t\t\tdefault 640"); + +MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil, John Harvey, Ian Armstrong"); +MODULE_LICENSE("GPL"); + +/* --------------------------------------------------------------------- */ + +#define IVTVFB_DBGFLG_WARN (1 << 0) +#define IVTVFB_DBGFLG_INFO (1 << 1) + +#define IVTVFB_DEBUG(x, type, fmt, args...) \ + do { \ + if ((x) & ivtvfb_debug) \ + printk(KERN_INFO "ivtvfb%d " type ": " fmt, itv->instance , ## args); \ + } while (0) +#define IVTVFB_DEBUG_WARN(fmt, args...) IVTVFB_DEBUG(IVTVFB_DBGFLG_WARN, "warning", fmt , ## args) +#define IVTVFB_DEBUG_INFO(fmt, args...) IVTVFB_DEBUG(IVTVFB_DBGFLG_INFO, "info", fmt , ## args) + +/* Standard kernel messages */ +#define IVTVFB_ERR(fmt, args...) printk(KERN_ERR "ivtvfb%d: " fmt, itv->instance , ## args) +#define IVTVFB_WARN(fmt, args...) printk(KERN_WARNING "ivtvfb%d: " fmt, itv->instance , ## args) +#define IVTVFB_INFO(fmt, args...) printk(KERN_INFO "ivtvfb%d: " fmt, itv->instance , ## args) + +/* --------------------------------------------------------------------- */ + +#define IVTV_OSD_MAX_WIDTH 720 +#define IVTV_OSD_MAX_HEIGHT 576 + +#define IVTV_OSD_BPP_8 0x00 +#define IVTV_OSD_BPP_16_444 0x03 +#define IVTV_OSD_BPP_16_555 0x02 +#define IVTV_OSD_BPP_16_565 0x01 +#define IVTV_OSD_BPP_32 0x04 + +struct osd_info { + /* Physical base address */ + unsigned long video_pbase; + /* Relative base address (relative to start of decoder memory) */ + u32 video_rbase; + /* Mapped base address */ + volatile char __iomem *video_vbase; + /* Buffer size */ + u32 video_buffer_size; + +#ifdef CONFIG_MTRR + /* video_base rounded down as required by hardware MTRRs */ + unsigned long fb_start_aligned_physaddr; + /* video_base rounded up as required by hardware MTRRs */ + unsigned long fb_end_aligned_physaddr; +#endif + + /* Store the buffer offset */ + int set_osd_coords_x; + int set_osd_coords_y; + + /* Current dimensions (NOT VISIBLE SIZE!) */ + int display_width; + int display_height; + int display_byte_stride; + + /* Current bits per pixel */ + int bits_per_pixel; + int bytes_per_pixel; + + /* Frame buffer stuff */ + struct fb_info ivtvfb_info; + struct fb_var_screeninfo ivtvfb_defined; + struct fb_fix_screeninfo ivtvfb_fix; + + /* Used for a warm start */ + struct fb_var_screeninfo fbvar_cur; + int blank_cur; + u32 palette_cur[256]; + u32 pan_cur; +}; + +struct ivtv_osd_coords { + unsigned long offset; + unsigned long max_offset; + int pixel_stride; + int lines; + int x; + int y; +}; + +/* --------------------------------------------------------------------- */ + +/* ivtv API calls for framebuffer related support */ + +static int ivtvfb_get_framebuffer(struct ivtv *itv, u32 *fbbase, + u32 *fblength) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + int rc; + + ivtv_firmware_check(itv, "ivtvfb_get_framebuffer"); + rc = ivtv_vapi_result(itv, data, CX2341X_OSD_GET_FRAMEBUFFER, 0); + *fbbase = data[0]; + *fblength = data[1]; + return rc; +} + +static int ivtvfb_get_osd_coords(struct ivtv *itv, + struct ivtv_osd_coords *osd) +{ + struct osd_info *oi = itv->osd_info; + u32 data[CX2341X_MBOX_MAX_DATA]; + + ivtv_vapi_result(itv, data, CX2341X_OSD_GET_OSD_COORDS, 0); + + osd->offset = data[0] - oi->video_rbase; + osd->max_offset = oi->display_width * oi->display_height * 4; + osd->pixel_stride = data[1]; + osd->lines = data[2]; + osd->x = data[3]; + osd->y = data[4]; + return 0; +} + +static int ivtvfb_set_osd_coords(struct ivtv *itv, const struct ivtv_osd_coords *osd) +{ + struct osd_info *oi = itv->osd_info; + + oi->display_width = osd->pixel_stride; + oi->display_byte_stride = osd->pixel_stride * oi->bytes_per_pixel; + oi->set_osd_coords_x += osd->x; + oi->set_osd_coords_y = osd->y; + + return ivtv_vapi(itv, CX2341X_OSD_SET_OSD_COORDS, 5, + osd->offset + oi->video_rbase, + osd->pixel_stride, + osd->lines, osd->x, osd->y); +} + +static int ivtvfb_set_display_window(struct ivtv *itv, struct v4l2_rect *ivtv_window) +{ + int osd_height_limit = itv->is_out_50hz ? 576 : 480; + + /* Only fail if resolution too high, otherwise fudge the start coords. */ + if ((ivtv_window->height > osd_height_limit) || (ivtv_window->width > IVTV_OSD_MAX_WIDTH)) + return -EINVAL; + + /* Ensure we don't exceed display limits */ + if (ivtv_window->top + ivtv_window->height > osd_height_limit) { + IVTVFB_DEBUG_WARN("ivtv_ioctl_fb_set_display_window - Invalid height setting (%d, %d)\n", + ivtv_window->top, ivtv_window->height); + ivtv_window->top = osd_height_limit - ivtv_window->height; + } + + if (ivtv_window->left + ivtv_window->width > IVTV_OSD_MAX_WIDTH) { + IVTVFB_DEBUG_WARN("ivtv_ioctl_fb_set_display_window - Invalid width setting (%d, %d)\n", + ivtv_window->left, ivtv_window->width); + ivtv_window->left = IVTV_OSD_MAX_WIDTH - ivtv_window->width; + } + + /* Set the OSD origin */ + write_reg((ivtv_window->top << 16) | ivtv_window->left, 0x02a04); + + /* How much to display */ + write_reg(((ivtv_window->top+ivtv_window->height) << 16) | (ivtv_window->left+ivtv_window->width), 0x02a08); + + /* Pass this info back the yuv handler */ + itv->yuv_info.osd_vis_w = ivtv_window->width; + itv->yuv_info.osd_vis_h = ivtv_window->height; + itv->yuv_info.osd_x_offset = ivtv_window->left; + itv->yuv_info.osd_y_offset = ivtv_window->top; + + return 0; +} + +static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, + unsigned long ivtv_dest_addr, void __user *userbuf, + int size_in_bytes) +{ + DEFINE_WAIT(wait); + int got_sig = 0; + + mutex_lock(&itv->udma.lock); + /* Map User DMA */ + if (ivtv_udma_setup(itv, ivtv_dest_addr, userbuf, size_in_bytes) <= 0) { + mutex_unlock(&itv->udma.lock); + IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, " + "Error with get_user_pages: %d bytes, %d pages returned\n", + size_in_bytes, itv->udma.page_count); + + /* get_user_pages must have failed completely */ + return -EIO; + } + + IVTVFB_DEBUG_INFO("ivtvfb_prep_dec_dma_to_device, %d bytes, %d pages\n", + size_in_bytes, itv->udma.page_count); + + ivtv_udma_prepare(itv); + prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); + /* if no UDMA is pending and no UDMA is in progress, then the DMA + is finished */ + while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) || + test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { + /* don't interrupt if the DMA is in progress but break off + a still pending DMA. */ + got_sig = signal_pending(current); + if (got_sig && test_and_clear_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags)) + break; + got_sig = 0; + schedule(); + } + finish_wait(&itv->dma_waitq, &wait); + + /* Unmap Last DMA Xfer */ + ivtv_udma_unmap(itv); + mutex_unlock(&itv->udma.lock); + if (got_sig) { + IVTV_DEBUG_INFO("User stopped OSD\n"); + return -EINTR; + } + + return 0; +} + +static int ivtvfb_prep_frame(struct ivtv *itv, int cmd, void __user *source, + unsigned long dest_offset, int count) +{ + DEFINE_WAIT(wait); + struct osd_info *oi = itv->osd_info; + + /* Nothing to do */ + if (count == 0) { + IVTVFB_DEBUG_WARN("ivtvfb_prep_frame: Nothing to do. count = 0\n"); + return -EINVAL; + } + + /* Check Total FB Size */ + if ((dest_offset + count) > oi->video_buffer_size) { + IVTVFB_WARN("ivtvfb_prep_frame: Overflowing the framebuffer %ld, only %d available\n", + dest_offset + count, oi->video_buffer_size); + return -E2BIG; + } + + /* Not fatal, but will have undesirable results */ + if ((unsigned long)source & 3) + IVTVFB_WARN("ivtvfb_prep_frame: Source address not 32 bit aligned (0x%08lx)\n", + (unsigned long)source); + + if (dest_offset & 3) + IVTVFB_WARN("ivtvfb_prep_frame: Dest offset not 32 bit aligned (%ld)\n", dest_offset); + + if (count & 3) + IVTVFB_WARN("ivtvfb_prep_frame: Count not a multiple of 4 (%d)\n", count); + + /* Check Source */ + if (!access_ok(VERIFY_READ, source + dest_offset, count)) { + IVTVFB_WARN("Invalid userspace pointer 0x%08lx\n", + (unsigned long)source); + + IVTVFB_DEBUG_WARN("access_ok() failed for offset 0x%08lx source 0x%08lx count %d\n", + dest_offset, (unsigned long)source, + count); + return -EINVAL; + } + + /* OSD Address to send DMA to */ + dest_offset += IVTV_DECODER_OFFSET + oi->video_rbase; + + /* Fill Buffers */ + return ivtvfb_prep_dec_dma_to_device(itv, dest_offset, source, count); +} + +static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + unsigned long p = *ppos; + void *dst; + int err = 0; + int dma_err; + unsigned long total_size; + struct ivtv *itv = (struct ivtv *) info->par; + unsigned long dma_offset = + IVTV_DECODER_OFFSET + itv->osd_info->video_rbase; + unsigned long dma_size; + u16 lead = 0, tail = 0; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p > total_size) + return -EFBIG; + + if (count > total_size) { + err = -EFBIG; + count = total_size; + } + + if (count + p > total_size) { + if (!err) + err = -ENOSPC; + count = total_size - p; + } + + dst = (void __force *) (info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + /* If transfer size > threshold and both src/dst + addresses are aligned, use DMA */ + if (count >= 4096 && + ((unsigned long)buf & 3) == ((unsigned long)dst & 3)) { + /* Odd address = can't DMA. Align */ + if ((unsigned long)dst & 3) { + lead = 4 - ((unsigned long)dst & 3); + if (copy_from_user(dst, buf, lead)) + return -EFAULT; + buf += lead; + dst += lead; + } + /* DMA resolution is 32 bits */ + if ((count - lead) & 3) + tail = (count - lead) & 3; + /* DMA the data */ + dma_size = count - lead - tail; + dma_err = ivtvfb_prep_dec_dma_to_device(itv, + p + lead + dma_offset, (void __user *)buf, dma_size); + if (dma_err) + return dma_err; + dst += dma_size; + buf += dma_size; + /* Copy any leftover data */ + if (tail && copy_from_user(dst, buf, tail)) + return -EFAULT; + } else if (copy_from_user(dst, buf, count)) { + return -EFAULT; + } + + if (!err) + *ppos += count; + + return (err) ? err : count; +} + +static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) +{ + DEFINE_WAIT(wait); + struct ivtv *itv = (struct ivtv *)info->par; + int rc = 0; + + switch (cmd) { + case FBIOGET_VBLANK: { + struct fb_vblank vblank; + u32 trace; + + memset(&vblank, 0, sizeof(struct fb_vblank)); + + vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT | + FB_VBLANK_HAVE_VSYNC; + trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16; + if (itv->is_out_50hz && trace > 312) + trace -= 312; + else if (itv->is_out_60hz && trace > 262) + trace -= 262; + if (trace == 1) + vblank.flags |= FB_VBLANK_VSYNCING; + vblank.count = itv->last_vsync_field; + vblank.vcount = trace; + vblank.hcount = 0; + if (copy_to_user((void __user *)arg, &vblank, sizeof(vblank))) + return -EFAULT; + return 0; + } + + case FBIO_WAITFORVSYNC: + prepare_to_wait(&itv->vsync_waitq, &wait, TASK_INTERRUPTIBLE); + if (!schedule_timeout(msecs_to_jiffies(50))) + rc = -ETIMEDOUT; + finish_wait(&itv->vsync_waitq, &wait); + return rc; + + case IVTVFB_IOC_DMA_FRAME: { + struct ivtvfb_dma_frame args; + + IVTVFB_DEBUG_INFO("IVTVFB_IOC_DMA_FRAME\n"); + if (copy_from_user(&args, (void __user *)arg, sizeof(args))) + return -EFAULT; + + return ivtvfb_prep_frame(itv, cmd, args.source, args.dest_offset, args.count); + } + + default: + IVTVFB_DEBUG_INFO("Unknown ioctl %08x\n", cmd); + return -EINVAL; + } + return 0; +} + +/* Framebuffer device handling */ + +static int ivtvfb_set_var(struct ivtv *itv, struct fb_var_screeninfo *var) +{ + struct osd_info *oi = itv->osd_info; + struct ivtv_osd_coords ivtv_osd; + struct v4l2_rect ivtv_window; + int osd_mode = -1; + + IVTVFB_DEBUG_INFO("ivtvfb_set_var\n"); + + /* Select color space */ + if (var->nonstd) /* YUV */ + write_reg(read_reg(0x02a00) | 0x0002000, 0x02a00); + else /* RGB */ + write_reg(read_reg(0x02a00) & ~0x0002000, 0x02a00); + + /* Set the color mode */ + switch (var->bits_per_pixel) { + case 8: + osd_mode = IVTV_OSD_BPP_8; + break; + case 32: + osd_mode = IVTV_OSD_BPP_32; + break; + case 16: + switch (var->green.length) { + case 4: + osd_mode = IVTV_OSD_BPP_16_444; + break; + case 5: + osd_mode = IVTV_OSD_BPP_16_555; + break; + case 6: + osd_mode = IVTV_OSD_BPP_16_565; + break; + default: + IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid bpp\n"); + } + break; + default: + IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid bpp\n"); + } + + /* Set video mode. Although rare, the display can become scrambled even + if we don't change mode. Always 'bounce' to osd_mode via mode 0 */ + if (osd_mode != -1) { + ivtv_vapi(itv, CX2341X_OSD_SET_PIXEL_FORMAT, 1, 0); + ivtv_vapi(itv, CX2341X_OSD_SET_PIXEL_FORMAT, 1, osd_mode); + } + + oi->bits_per_pixel = var->bits_per_pixel; + oi->bytes_per_pixel = var->bits_per_pixel / 8; + + /* Set the flicker filter */ + switch (var->vmode & FB_VMODE_MASK) { + case FB_VMODE_NONINTERLACED: /* Filter on */ + ivtv_vapi(itv, CX2341X_OSD_SET_FLICKER_STATE, 1, 1); + break; + case FB_VMODE_INTERLACED: /* Filter off */ + ivtv_vapi(itv, CX2341X_OSD_SET_FLICKER_STATE, 1, 0); + break; + default: + IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid video mode\n"); + } + + /* Read the current osd info */ + ivtvfb_get_osd_coords(itv, &ivtv_osd); + + /* Now set the OSD to the size we want */ + ivtv_osd.pixel_stride = var->xres_virtual; + ivtv_osd.lines = var->yres_virtual; + ivtv_osd.x = 0; + ivtv_osd.y = 0; + ivtvfb_set_osd_coords(itv, &ivtv_osd); + + /* Can't seem to find the right API combo for this. + Use another function which does what we need through direct register access. */ + ivtv_window.width = var->xres; + ivtv_window.height = var->yres; + + /* Minimum margin cannot be 0, as X won't allow such a mode */ + if (!var->upper_margin) + var->upper_margin++; + if (!var->left_margin) + var->left_margin++; + ivtv_window.top = var->upper_margin - 1; + ivtv_window.left = var->left_margin - 1; + + ivtvfb_set_display_window(itv, &ivtv_window); + + /* Pass screen size back to yuv handler */ + itv->yuv_info.osd_full_w = ivtv_osd.pixel_stride; + itv->yuv_info.osd_full_h = ivtv_osd.lines; + + /* Force update of yuv registers */ + itv->yuv_info.yuv_forced_update = 1; + + /* Keep a copy of these settings */ + memcpy(&oi->fbvar_cur, var, sizeof(oi->fbvar_cur)); + + IVTVFB_DEBUG_INFO("Display size: %dx%d (virtual %dx%d) @ %dbpp\n", + var->xres, var->yres, + var->xres_virtual, var->yres_virtual, + var->bits_per_pixel); + + IVTVFB_DEBUG_INFO("Display position: %d, %d\n", + var->left_margin, var->upper_margin); + + IVTVFB_DEBUG_INFO("Display filter: %s\n", + (var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED ? "on" : "off"); + IVTVFB_DEBUG_INFO("Color space: %s\n", var->nonstd ? "YUV" : "RGB"); + + return 0; +} + +static int ivtvfb_get_fix(struct ivtv *itv, struct fb_fix_screeninfo *fix) +{ + struct osd_info *oi = itv->osd_info; + + IVTVFB_DEBUG_INFO("ivtvfb_get_fix\n"); + memset(fix, 0, sizeof(struct fb_fix_screeninfo)); + strlcpy(fix->id, "cx23415 TV out", sizeof(fix->id)); + fix->smem_start = oi->video_pbase; + fix->smem_len = oi->video_buffer_size; + fix->type = FB_TYPE_PACKED_PIXELS; + fix->visual = (oi->bits_per_pixel == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + fix->xpanstep = 1; + fix->ypanstep = 1; + fix->ywrapstep = 0; + fix->line_length = oi->display_byte_stride; + fix->accel = FB_ACCEL_NONE; + return 0; +} + +/* Check the requested display mode, returning -EINVAL if we can't + handle it. */ + +static int _ivtvfb_check_var(struct fb_var_screeninfo *var, struct ivtv *itv) +{ + struct osd_info *oi = itv->osd_info; + int osd_height_limit; + u32 pixclock, hlimit, vlimit; + + IVTVFB_DEBUG_INFO("ivtvfb_check_var\n"); + + /* Set base references for mode calcs. */ + if (itv->is_out_50hz) { + pixclock = 84316; + hlimit = 776; + vlimit = 591; + osd_height_limit = 576; + } + else { + pixclock = 83926; + hlimit = 776; + vlimit = 495; + osd_height_limit = 480; + } + + if (var->bits_per_pixel == 8 || var->bits_per_pixel == 32) { + var->transp.offset = 24; + var->transp.length = 8; + var->red.offset = 16; + var->red.length = 8; + var->green.offset = 8; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + } + else if (var->bits_per_pixel == 16) { + /* To find out the true mode, check green length */ + switch (var->green.length) { + case 4: + var->red.offset = 8; + var->red.length = 4; + var->green.offset = 4; + var->green.length = 4; + var->blue.offset = 0; + var->blue.length = 4; + var->transp.offset = 12; + var->transp.length = 1; + break; + case 5: + var->red.offset = 10; + var->red.length = 5; + var->green.offset = 5; + var->green.length = 5; + var->blue.offset = 0; + var->blue.length = 5; + var->transp.offset = 15; + var->transp.length = 1; + break; + default: + var->red.offset = 11; + var->red.length = 5; + var->green.offset = 5; + var->green.length = 6; + var->blue.offset = 0; + var->blue.length = 5; + var->transp.offset = 0; + var->transp.length = 0; + break; + } + } + else { + IVTVFB_DEBUG_WARN("Invalid colour mode: %d\n", var->bits_per_pixel); + return -EINVAL; + } + + /* Check the resolution */ + if (var->xres > IVTV_OSD_MAX_WIDTH || var->yres > osd_height_limit) { + IVTVFB_DEBUG_WARN("Invalid resolution: %dx%d\n", + var->xres, var->yres); + return -EINVAL; + } + + /* Max horizontal size is 1023 @ 32bpp, 2046 & 16bpp, 4092 @ 8bpp */ + if (var->xres_virtual > 4095 / (var->bits_per_pixel / 8) || + var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8) > oi->video_buffer_size || + var->xres_virtual < var->xres || + var->yres_virtual < var->yres) { + IVTVFB_DEBUG_WARN("Invalid virtual resolution: %dx%d\n", + var->xres_virtual, var->yres_virtual); + return -EINVAL; + } + + /* Some extra checks if in 8 bit mode */ + if (var->bits_per_pixel == 8) { + /* Width must be a multiple of 4 */ + if (var->xres & 3) { + IVTVFB_DEBUG_WARN("Invalid resolution for 8bpp: %d\n", var->xres); + return -EINVAL; + } + if (var->xres_virtual & 3) { + IVTVFB_DEBUG_WARN("Invalid virtual resolution for 8bpp: %d)\n", var->xres_virtual); + return -EINVAL; + } + } + else if (var->bits_per_pixel == 16) { + /* Width must be a multiple of 2 */ + if (var->xres & 1) { + IVTVFB_DEBUG_WARN("Invalid resolution for 16bpp: %d\n", var->xres); + return -EINVAL; + } + if (var->xres_virtual & 1) { + IVTVFB_DEBUG_WARN("Invalid virtual resolution for 16bpp: %d)\n", var->xres_virtual); + return -EINVAL; + } + } + + /* Now check the offsets */ + if (var->xoffset >= var->xres_virtual || var->yoffset >= var->yres_virtual) { + IVTVFB_DEBUG_WARN("Invalid offset: %d (%d) %d (%d)\n", + var->xoffset, var->xres_virtual, var->yoffset, var->yres_virtual); + return -EINVAL; + } + + /* Check pixel format */ + if (var->nonstd > 1) { + IVTVFB_DEBUG_WARN("Invalid nonstd % d\n", var->nonstd); + return -EINVAL; + } + + /* Check video mode */ + if (((var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) && + ((var->vmode & FB_VMODE_MASK) != FB_VMODE_INTERLACED)) { + IVTVFB_DEBUG_WARN("Invalid video mode: %d\n", var->vmode & FB_VMODE_MASK); + return -EINVAL; + } + + /* Check the left & upper margins + If the margins are too large, just center the screen + (enforcing margins causes too many problems) */ + + if (var->left_margin + var->xres > IVTV_OSD_MAX_WIDTH + 1) + var->left_margin = 1 + ((IVTV_OSD_MAX_WIDTH - var->xres) / 2); + + if (var->upper_margin + var->yres > (itv->is_out_50hz ? 577 : 481)) + var->upper_margin = 1 + (((itv->is_out_50hz ? 576 : 480) - + var->yres) / 2); + + /* Maintain overall 'size' for a constant refresh rate */ + var->right_margin = hlimit - var->left_margin - var->xres; + var->lower_margin = vlimit - var->upper_margin - var->yres; + + /* Fixed sync times */ + var->hsync_len = 24; + var->vsync_len = 2; + + /* Non-interlaced / interlaced mode is used to switch the OSD filter + on or off. Adjust the clock timings to maintain a constant + vertical refresh rate. */ + if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED) + var->pixclock = pixclock / 2; + else + var->pixclock = pixclock; + + itv->osd_rect.width = var->xres; + itv->osd_rect.height = var->yres; + + IVTVFB_DEBUG_INFO("Display size: %dx%d (virtual %dx%d) @ %dbpp\n", + var->xres, var->yres, + var->xres_virtual, var->yres_virtual, + var->bits_per_pixel); + + IVTVFB_DEBUG_INFO("Display position: %d, %d\n", + var->left_margin, var->upper_margin); + + IVTVFB_DEBUG_INFO("Display filter: %s\n", + (var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED ? "on" : "off"); + IVTVFB_DEBUG_INFO("Color space: %s\n", var->nonstd ? "YUV" : "RGB"); + return 0; +} + +static int ivtvfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct ivtv *itv = (struct ivtv *) info->par; + IVTVFB_DEBUG_INFO("ivtvfb_check_var\n"); + return _ivtvfb_check_var(var, itv); +} + +static int ivtvfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) +{ + u32 osd_pan_index; + struct ivtv *itv = (struct ivtv *) info->par; + + if (var->yoffset + info->var.yres > info->var.yres_virtual || + var->xoffset + info->var.xres > info->var.xres_virtual) + return -EINVAL; + + osd_pan_index = var->yoffset * info->fix.line_length + + var->xoffset * info->var.bits_per_pixel / 8; + write_reg(osd_pan_index, 0x02A0C); + + /* Pass this info back the yuv handler */ + itv->yuv_info.osd_x_pan = var->xoffset; + itv->yuv_info.osd_y_pan = var->yoffset; + /* Force update of yuv registers */ + itv->yuv_info.yuv_forced_update = 1; + /* Remember this value */ + itv->osd_info->pan_cur = osd_pan_index; + return 0; +} + +static int ivtvfb_set_par(struct fb_info *info) +{ + int rc = 0; + struct ivtv *itv = (struct ivtv *) info->par; + + IVTVFB_DEBUG_INFO("ivtvfb_set_par\n"); + + rc = ivtvfb_set_var(itv, &info->var); + ivtvfb_pan_display(&info->var, info); + ivtvfb_get_fix(itv, &info->fix); + ivtv_firmware_check(itv, "ivtvfb_set_par"); + return rc; +} + +static int ivtvfb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + u32 color, *palette; + struct ivtv *itv = (struct ivtv *)info->par; + + if (regno >= info->cmap.len) + return -EINVAL; + + color = ((transp & 0xFF00) << 16) |((red & 0xFF00) << 8) | (green & 0xFF00) | ((blue & 0xFF00) >> 8); + if (info->var.bits_per_pixel <= 8) { + write_reg(regno, 0x02a30); + write_reg(color, 0x02a34); + itv->osd_info->palette_cur[regno] = color; + return 0; + } + if (regno >= 16) + return -EINVAL; + + palette = info->pseudo_palette; + if (info->var.bits_per_pixel == 16) { + switch (info->var.green.length) { + case 4: + color = ((red & 0xf000) >> 4) | + ((green & 0xf000) >> 8) | + ((blue & 0xf000) >> 12); + break; + case 5: + color = ((red & 0xf800) >> 1) | + ((green & 0xf800) >> 6) | + ((blue & 0xf800) >> 11); + break; + case 6: + color = (red & 0xf800 ) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11); + break; + } + } + palette[regno] = color; + return 0; +} + +/* We don't really support blanking. All this does is enable or + disable the OSD. */ +static int ivtvfb_blank(int blank_mode, struct fb_info *info) +{ + struct ivtv *itv = (struct ivtv *)info->par; + + IVTVFB_DEBUG_INFO("Set blanking mode : %d\n", blank_mode); + switch (blank_mode) { + case FB_BLANK_UNBLANK: + ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 1); + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1); + break; + case FB_BLANK_NORMAL: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_VSYNC_SUSPEND: + ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0); + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1); + break; + case FB_BLANK_POWERDOWN: + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0); + ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0); + break; + } + itv->osd_info->blank_cur = blank_mode; + return 0; +} + +static struct fb_ops ivtvfb_ops = { + .owner = THIS_MODULE, + .fb_write = ivtvfb_write, + .fb_check_var = ivtvfb_check_var, + .fb_set_par = ivtvfb_set_par, + .fb_setcolreg = ivtvfb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_cursor = NULL, + .fb_ioctl = ivtvfb_ioctl, + .fb_pan_display = ivtvfb_pan_display, + .fb_blank = ivtvfb_blank, +}; + +/* Restore hardware after firmware restart */ +static void ivtvfb_restore(struct ivtv *itv) +{ + struct osd_info *oi = itv->osd_info; + int i; + + ivtvfb_set_var(itv, &oi->fbvar_cur); + ivtvfb_blank(oi->blank_cur, &oi->ivtvfb_info); + for (i = 0; i < 256; i++) { + write_reg(i, 0x02a30); + write_reg(oi->palette_cur[i], 0x02a34); + } + write_reg(oi->pan_cur, 0x02a0c); +} + +/* Initialization */ + + +/* Setup our initial video mode */ +static int ivtvfb_init_vidmode(struct ivtv *itv) +{ + struct osd_info *oi = itv->osd_info; + struct v4l2_rect start_window; + int max_height; + + /* Color mode */ + + if (osd_depth != 8 && osd_depth != 16 && osd_depth != 32) + osd_depth = 8; + oi->bits_per_pixel = osd_depth; + oi->bytes_per_pixel = oi->bits_per_pixel / 8; + + /* Horizontal size & position */ + + if (osd_xres > 720) + osd_xres = 720; + + /* Must be a multiple of 4 for 8bpp & 2 for 16bpp */ + if (osd_depth == 8) + osd_xres &= ~3; + else if (osd_depth == 16) + osd_xres &= ~1; + + start_window.width = osd_xres ? osd_xres : 640; + + /* Check horizontal start (osd_left). */ + if (osd_left && osd_left + start_window.width > 721) { + IVTVFB_ERR("Invalid osd_left - assuming default\n"); + osd_left = 0; + } + + /* Hardware coords start at 0, user coords start at 1. */ + osd_left--; + + start_window.left = osd_left >= 0 ? + osd_left : ((IVTV_OSD_MAX_WIDTH - start_window.width) / 2); + + oi->display_byte_stride = + start_window.width * oi->bytes_per_pixel; + + /* Vertical size & position */ + + max_height = itv->is_out_50hz ? 576 : 480; + + if (osd_yres > max_height) + osd_yres = max_height; + + start_window.height = osd_yres ? + osd_yres : itv->is_out_50hz ? 480 : 400; + + /* Check vertical start (osd_upper). */ + if (osd_upper + start_window.height > max_height + 1) { + IVTVFB_ERR("Invalid osd_upper - assuming default\n"); + osd_upper = 0; + } + + /* Hardware coords start at 0, user coords start at 1. */ + osd_upper--; + + start_window.top = osd_upper >= 0 ? osd_upper : ((max_height - start_window.height) / 2); + + oi->display_width = start_window.width; + oi->display_height = start_window.height; + + /* Generate a valid fb_var_screeninfo */ + + oi->ivtvfb_defined.xres = oi->display_width; + oi->ivtvfb_defined.yres = oi->display_height; + oi->ivtvfb_defined.xres_virtual = oi->display_width; + oi->ivtvfb_defined.yres_virtual = oi->display_height; + oi->ivtvfb_defined.bits_per_pixel = oi->bits_per_pixel; + oi->ivtvfb_defined.vmode = (osd_laced ? FB_VMODE_INTERLACED : FB_VMODE_NONINTERLACED); + oi->ivtvfb_defined.left_margin = start_window.left + 1; + oi->ivtvfb_defined.upper_margin = start_window.top + 1; + oi->ivtvfb_defined.accel_flags = FB_ACCEL_NONE; + oi->ivtvfb_defined.nonstd = 0; + + /* We've filled in the most data, let the usual mode check + routine fill in the rest. */ + _ivtvfb_check_var(&oi->ivtvfb_defined, itv); + + /* Generate valid fb_fix_screeninfo */ + + ivtvfb_get_fix(itv, &oi->ivtvfb_fix); + + /* Generate valid fb_info */ + + oi->ivtvfb_info.node = -1; + oi->ivtvfb_info.flags = FBINFO_FLAG_DEFAULT; + oi->ivtvfb_info.fbops = &ivtvfb_ops; + oi->ivtvfb_info.par = itv; + oi->ivtvfb_info.var = oi->ivtvfb_defined; + oi->ivtvfb_info.fix = oi->ivtvfb_fix; + oi->ivtvfb_info.screen_base = (u8 __iomem *)oi->video_vbase; + oi->ivtvfb_info.fbops = &ivtvfb_ops; + + /* Supply some monitor specs. Bogus values will do for now */ + oi->ivtvfb_info.monspecs.hfmin = 8000; + oi->ivtvfb_info.monspecs.hfmax = 70000; + oi->ivtvfb_info.monspecs.vfmin = 10; + oi->ivtvfb_info.monspecs.vfmax = 100; + + /* Allocate color map */ + if (fb_alloc_cmap(&oi->ivtvfb_info.cmap, 256, 1)) { + IVTVFB_ERR("abort, unable to alloc cmap\n"); + return -ENOMEM; + } + + /* Allocate the pseudo palette */ + oi->ivtvfb_info.pseudo_palette = + kmalloc(sizeof(u32) * 16, GFP_KERNEL|__GFP_NOWARN); + + if (!oi->ivtvfb_info.pseudo_palette) { + IVTVFB_ERR("abort, unable to alloc pseudo palette\n"); + return -ENOMEM; + } + + return 0; +} + +/* Find OSD buffer base & size. Add to mtrr. Zero osd buffer. */ + +static int ivtvfb_init_io(struct ivtv *itv) +{ + struct osd_info *oi = itv->osd_info; + + mutex_lock(&itv->serialize_lock); + if (ivtv_init_on_first_open(itv)) { + mutex_unlock(&itv->serialize_lock); + IVTVFB_ERR("Failed to initialize ivtv\n"); + return -ENXIO; + } + mutex_unlock(&itv->serialize_lock); + + if (ivtvfb_get_framebuffer(itv, &oi->video_rbase, + &oi->video_buffer_size) < 0) { + IVTVFB_ERR("Firmware failed to respond\n"); + return -EIO; + } + + /* The osd buffer size depends on the number of video buffers allocated + on the PVR350 itself. For now we'll hardcode the smallest osd buffer + size to prevent any overlap. */ + oi->video_buffer_size = 1704960; + + oi->video_pbase = itv->base_addr + IVTV_DECODER_OFFSET + oi->video_rbase; + oi->video_vbase = itv->dec_mem + oi->video_rbase; + + if (!oi->video_vbase) { + IVTVFB_ERR("abort, video memory 0x%x @ 0x%lx isn't mapped!\n", + oi->video_buffer_size, oi->video_pbase); + return -EIO; + } + + IVTVFB_INFO("Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n", + oi->video_pbase, oi->video_vbase, + oi->video_buffer_size / 1024); + +#ifdef CONFIG_MTRR + { + /* Find the largest power of two that maps the whole buffer */ + int size_shift = 31; + + while (!(oi->video_buffer_size & (1 << size_shift))) { + size_shift--; + } + size_shift++; + oi->fb_start_aligned_physaddr = oi->video_pbase & ~((1 << size_shift) - 1); + oi->fb_end_aligned_physaddr = oi->video_pbase + oi->video_buffer_size; + oi->fb_end_aligned_physaddr += (1 << size_shift) - 1; + oi->fb_end_aligned_physaddr &= ~((1 << size_shift) - 1); + if (mtrr_add(oi->fb_start_aligned_physaddr, + oi->fb_end_aligned_physaddr - oi->fb_start_aligned_physaddr, + MTRR_TYPE_WRCOMB, 1) < 0) { + IVTVFB_INFO("disabled mttr\n"); + oi->fb_start_aligned_physaddr = 0; + oi->fb_end_aligned_physaddr = 0; + } + } +#endif + + /* Blank the entire osd. */ + memset_io(oi->video_vbase, 0, oi->video_buffer_size); + + return 0; +} + +/* Release any memory we've grabbed & remove mtrr entry */ +static void ivtvfb_release_buffers (struct ivtv *itv) +{ + struct osd_info *oi = itv->osd_info; + + /* Release cmap */ + if (oi->ivtvfb_info.cmap.len) + fb_dealloc_cmap(&oi->ivtvfb_info.cmap); + + /* Release pseudo palette */ + kfree(oi->ivtvfb_info.pseudo_palette); + +#ifdef CONFIG_MTRR + if (oi->fb_end_aligned_physaddr) { + mtrr_del(-1, oi->fb_start_aligned_physaddr, + oi->fb_end_aligned_physaddr - oi->fb_start_aligned_physaddr); + } +#endif + + kfree(oi); + itv->osd_info = NULL; +} + +/* Initialize the specified card */ + +static int ivtvfb_init_card(struct ivtv *itv) +{ + int rc; + + if (itv->osd_info) { + IVTVFB_ERR("Card %d already initialised\n", ivtvfb_card_id); + return -EBUSY; + } + + itv->osd_info = kzalloc(sizeof(struct osd_info), + GFP_ATOMIC|__GFP_NOWARN); + if (itv->osd_info == NULL) { + IVTVFB_ERR("Failed to allocate memory for osd_info\n"); + return -ENOMEM; + } + + /* Find & setup the OSD buffer */ + rc = ivtvfb_init_io(itv); + if (rc) { + ivtvfb_release_buffers(itv); + return rc; + } + + /* Set the startup video mode information */ + if ((rc = ivtvfb_init_vidmode(itv))) { + ivtvfb_release_buffers(itv); + return rc; + } + + /* Register the framebuffer */ + if (register_framebuffer(&itv->osd_info->ivtvfb_info) < 0) { + ivtvfb_release_buffers(itv); + return -EINVAL; + } + + itv->osd_video_pbase = itv->osd_info->video_pbase; + + /* Set the card to the requested mode */ + ivtvfb_set_par(&itv->osd_info->ivtvfb_info); + + /* Set color 0 to black */ + write_reg(0, 0x02a30); + write_reg(0, 0x02a34); + + /* Enable the osd */ + ivtvfb_blank(FB_BLANK_UNBLANK, &itv->osd_info->ivtvfb_info); + + /* Enable restart */ + itv->ivtvfb_restore = ivtvfb_restore; + + /* Allocate DMA */ + ivtv_udma_alloc(itv); + return 0; + +} + +static int __init ivtvfb_callback_init(struct device *dev, void *p) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev); + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + if (ivtvfb_init_card(itv) == 0) { + IVTVFB_INFO("Framebuffer registered on %s\n", + itv->v4l2_dev.name); + (*(int *)p)++; + } + } + return 0; +} + +static int ivtvfb_callback_cleanup(struct device *dev, void *p) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev); + struct osd_info *oi = itv->osd_info; + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + if (unregister_framebuffer(&itv->osd_info->ivtvfb_info)) { + IVTVFB_WARN("Framebuffer %d is in use, cannot unload\n", + itv->instance); + return 0; + } + IVTVFB_INFO("Unregister framebuffer %d\n", itv->instance); + itv->ivtvfb_restore = NULL; + ivtvfb_blank(FB_BLANK_VSYNC_SUSPEND, &oi->ivtvfb_info); + ivtvfb_release_buffers(itv); + itv->osd_video_pbase = 0; + } + return 0; +} + +static int __init ivtvfb_init(void) +{ + struct device_driver *drv; + int registered = 0; + int err; + + if (ivtvfb_card_id < -1 || ivtvfb_card_id >= IVTV_MAX_CARDS) { + printk(KERN_ERR "ivtvfb: ivtvfb_card_id parameter is out of range (valid range: -1 - %d)\n", + IVTV_MAX_CARDS - 1); + return -EINVAL; + } + + drv = driver_find("ivtv", &pci_bus_type); + err = driver_for_each_device(drv, NULL, ®istered, ivtvfb_callback_init); + (void)err; /* suppress compiler warning */ + if (!registered) { + printk(KERN_ERR "ivtvfb: no cards found\n"); + return -ENODEV; + } + return 0; +} + +static void ivtvfb_cleanup(void) +{ + struct device_driver *drv; + int err; + + printk(KERN_INFO "ivtvfb: Unloading framebuffer module\n"); + + drv = driver_find("ivtv", &pci_bus_type); + err = driver_for_each_device(drv, NULL, NULL, ivtvfb_callback_cleanup); + (void)err; /* suppress compiler warning */ +} + +module_init(ivtvfb_init); +module_exit(ivtvfb_cleanup); diff --git a/drivers/media/pci/mantis/Kconfig b/drivers/media/pci/mantis/Kconfig new file mode 100644 index 00000000..d3cc2163 --- /dev/null +++ b/drivers/media/pci/mantis/Kconfig @@ -0,0 +1,38 @@ +config MANTIS_CORE + tristate "Mantis/Hopper PCI bridge based devices" + depends on PCI && I2C && INPUT && RC_CORE + + help + Support for PCI cards based on the Mantis and Hopper PCi bridge. + + Say Y if you own such a device and want to use it. + +config DVB_MANTIS + tristate "MANTIS based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_MB86A16 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA665x if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_PLL + help + Support for PCI cards based on the Mantis PCI bridge. + Say Y when you have a Mantis based DVB card and want to use it. + + If unsure say N. + +config DVB_HOPPER + tristate "HOPPER based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_PLL + help + Support for PCI cards based on the Hopper PCI bridge. + Say Y when you have a Hopper based DVB card and want to use it. + + If unsure say N diff --git a/drivers/media/pci/mantis/Makefile b/drivers/media/pci/mantis/Makefile new file mode 100644 index 00000000..f715051e --- /dev/null +++ b/drivers/media/pci/mantis/Makefile @@ -0,0 +1,28 @@ +mantis_core-objs := mantis_ioc.o \ + mantis_uart.o \ + mantis_dma.o \ + mantis_pci.o \ + mantis_i2c.o \ + mantis_dvb.o \ + mantis_evm.o \ + mantis_hif.o \ + mantis_ca.o \ + mantis_pcmcia.o \ + mantis_input.o + +mantis-objs := mantis_cards.o \ + mantis_vp1033.o \ + mantis_vp1034.o \ + mantis_vp1041.o \ + mantis_vp2033.o \ + mantis_vp2040.o \ + mantis_vp3030.o + +hopper-objs := hopper_cards.o \ + hopper_vp3028.o + +obj-$(CONFIG_MANTIS_CORE) += mantis_core.o +obj-$(CONFIG_DVB_MANTIS) += mantis.o +obj-$(CONFIG_DVB_HOPPER) += hopper.o + +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/ diff --git a/drivers/media/pci/mantis/hopper_cards.c b/drivers/media/pci/mantis/hopper_cards.c new file mode 100644 index 00000000..6fe9fe52 --- /dev/null +++ b/drivers/media/pci/mantis/hopper_cards.c @@ -0,0 +1,278 @@ +/* + Hopper PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "hopper_vp3028.h" +#include "mantis_dma.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 0 (no)"); + +#define DRIVER_NAME "Hopper" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static int devs; + +static irqreturn_t hopper_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, " Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int hopper_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &hopper_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + devs++; + + return err; + +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void hopper_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; + +} + +static struct pci_device_id hopper_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config), + { } +}; + +MODULE_DEVICE_TABLE(pci, hopper_pci_table); + +static struct pci_driver hopper_pci_driver = { + .name = DRIVER_NAME, + .id_table = hopper_pci_table, + .probe = hopper_pci_probe, + .remove = hopper_pci_remove, +}; + +static int hopper_init(void) +{ + return pci_register_driver(&hopper_pci_driver); +} + +static void hopper_exit(void) +{ + return pci_unregister_driver(&hopper_pci_driver); +} + +module_init(hopper_init); +module_exit(hopper_exit); + +MODULE_DESCRIPTION("HOPPER driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/mantis/hopper_vp3028.c b/drivers/media/pci/mantis/hopper_vp3028.c new file mode 100644 index 00000000..68a29f8b --- /dev/null +++ b/drivers/media/pci/mantis/hopper_vp3028.c @@ -0,0 +1,88 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "hopper_vp3028.h" + +struct zl10353_config hopper_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; + int err = 0; + + mantis_gpio_set_bits(mantis, config->reset, 0); + msleep(100); + err = mantis_frontend_power(mantis, POWER_ON); + msleep(100); + mantis_gpio_set_bits(mantis, config->reset, 1); + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = dvb_attach(zl10353_attach, &hopper_vp3028_config, adapter); + + if (!fe) + return -1; + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3028_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3028_frontend_init, + .power = GPIF_A00, + .reset = GPIF_A03, +}; diff --git a/drivers/media/pci/mantis/hopper_vp3028.h b/drivers/media/pci/mantis/hopper_vp3028.h new file mode 100644 index 00000000..57239498 --- /dev/null +++ b/drivers/media/pci/mantis/hopper_vp3028.h @@ -0,0 +1,30 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "mantis_common.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct mantis_hwconfig vp3028_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/pci/mantis/mantis_ca.c b/drivers/media/pci/mantis/mantis_ca.c new file mode 100644 index 00000000..60c6c2f2 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_ca.c @@ -0,0 +1,210 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" +#include "mantis_hif.h" +#include "mantis_reg.h" + +#include "mantis_ca.h" + +static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_mem(ca, addr); +} + +static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_mem(ca, addr, data); +} + +static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_iom(ca, addr); +} + +static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_iom(ca, addr, data); +} + +static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); + udelay(500); /* Wait.. */ + mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */ + udelay(500); + mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */ + msleep(1000); + dvb_ca_en50221_camready_irq(&ca->en50221, 0); + + return 0; +} + +static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); + + return 0; +} + +static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); +/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */ + + return 0; +} + +static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); + + if (ca->slot_state == MODULE_INSERTED) { + dprintk(MANTIS_DEBUG, 1, "CA Module present and ready"); + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } else { + dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready"); + } + + return 0; +} + +int mantis_ca_init(struct mantis_pci *mantis) +{ + struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; + struct mantis_ca *ca; + int ca_flags = 0, result; + + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA"); + ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL); + if (!ca) { + dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting .."); + result = -ENOMEM; + goto err; + } + + ca->ca_priv = mantis; + mantis->mantis_ca = ca; + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE; + /* register CA interface */ + ca->en50221.owner = THIS_MODULE; + ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem; + ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem; + ca->en50221.read_cam_control = mantis_ca_read_cam_ctl; + ca->en50221.write_cam_control = mantis_ca_write_cam_ctl; + ca->en50221.slot_reset = mantis_ca_slot_reset; + ca->en50221.slot_shutdown = mantis_ca_slot_shutdown; + ca->en50221.slot_ts_enable = mantis_ts_control; + ca->en50221.poll_slot_status = mantis_slot_status; + ca->en50221.data = ca; + + mutex_init(&ca->ca_lock); + + init_waitqueue_head(&ca->hif_data_wq); + init_waitqueue_head(&ca->hif_opdone_wq); + init_waitqueue_head(&ca->hif_write_wq); + + dprintk(MANTIS_ERROR, 1, "Registering EN50221 device"); + result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1); + if (result != 0) { + dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result); + goto err; + } + dprintk(MANTIS_ERROR, 1, "Registered EN50221 device"); + mantis_evmgr_init(ca); + return 0; +err: + kfree(ca); + return result; +} +EXPORT_SYMBOL_GPL(mantis_ca_init); + +void mantis_ca_exit(struct mantis_pci *mantis) +{ + struct mantis_ca *ca = mantis->mantis_ca; + + dprintk(MANTIS_DEBUG, 1, "Mantis CA exit"); + if (!ca) + return; + + mantis_evmgr_exit(ca); + dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device"); + dvb_ca_en50221_release(&ca->en50221); + + kfree(ca); +} +EXPORT_SYMBOL_GPL(mantis_ca_exit); diff --git a/drivers/media/pci/mantis/mantis_ca.h b/drivers/media/pci/mantis/mantis_ca.h new file mode 100644 index 00000000..dc63e55f --- /dev/null +++ b/drivers/media/pci/mantis/mantis_ca.h @@ -0,0 +1,27 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_CA_H +#define __MANTIS_CA_H + +extern int mantis_ca_init(struct mantis_pci *mantis); +extern void mantis_ca_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_CA_H */ diff --git a/drivers/media/pci/mantis/mantis_cards.c b/drivers/media/pci/mantis/mantis_cards.c new file mode 100644 index 00000000..932a0d73 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_cards.c @@ -0,0 +1,308 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" + +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp1041.h" +#include "mantis_vp2033.h" +#include "mantis_vp2040.h" +#include "mantis_vp3030.h" + +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 0 (no)"); + +static int devs; + +#define DRIVER_NAME "Mantis" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static irqreturn_t mantis_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, " Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int mantis_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &mantis_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + err = mantis_uart_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err); + goto fail6; + } + + devs++; + + return err; + + + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err); + mantis_uart_exit(mantis); + +fail6: +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void mantis_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + + mantis_uart_exit(mantis); + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; +} + +static struct pci_device_id mantis_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config), + MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config), + MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config), + MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2040_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config), + { } +}; + +MODULE_DEVICE_TABLE(pci, mantis_pci_table); + +static struct pci_driver mantis_pci_driver = { + .name = DRIVER_NAME, + .id_table = mantis_pci_table, + .probe = mantis_pci_probe, + .remove = mantis_pci_remove, +}; + +static int mantis_init(void) +{ + return pci_register_driver(&mantis_pci_driver); +} + +static void mantis_exit(void) +{ + return pci_unregister_driver(&mantis_pci_driver); +} + +module_init(mantis_init); +module_exit(mantis_exit); + +MODULE_DESCRIPTION("MANTIS driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/mantis/mantis_common.h b/drivers/media/pci/mantis/mantis_common.h new file mode 100644 index 00000000..f2410cf0 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_common.h @@ -0,0 +1,179 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_COMMON_H +#define __MANTIS_COMMON_H + +#include +#include +#include + +#include "mantis_uart.h" + +#include "mantis_link.h" + +#define MANTIS_ERROR 0 +#define MANTIS_NOTICE 1 +#define MANTIS_INFO 2 +#define MANTIS_DEBUG 3 +#define MANTIS_TMG 9 + +#define dprintk(y, z, format, arg...) do { \ + if (z) { \ + if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \ + printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \ + printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \ + printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + } else { \ + if (mantis->verbose > y) \ + printk(format , ##arg); \ + } \ +} while(0) + +#define mwrite(dat, addr) writel((dat), addr) +#define mread(addr) readl(addr) + +#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr))) +#define mmread(addr) mread(mantis->mmio + (addr)) + +#define MANTIS_TS_188 0 +#define MANTIS_TS_204 1 + +#define TWINHAN_TECHNOLOGIES 0x1822 +#define MANTIS 0x4e35 + +#define TECHNISAT 0x1ae4 +#define TERRATEC 0x153b + +#define MAKE_ENTRY(__subven, __subdev, __configptr) { \ + .vendor = TWINHAN_TECHNOLOGIES, \ + .device = MANTIS, \ + .subvendor = (__subven), \ + .subdevice = (__subdev), \ + .driver_data = (unsigned long) (__configptr) \ +} + +enum mantis_i2c_mode { + MANTIS_PAGE_MODE = 0, + MANTIS_BYTE_MODE, +}; + +struct mantis_pci; + +struct mantis_hwconfig { + char *model_name; + char *dev_type; + u32 ts_size; + + enum mantis_baud baud_rate; + enum mantis_parity parity; + u32 bytes; + + irqreturn_t (*irq_handler)(int irq, void *dev_id); + int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe); + + u8 power; + u8 reset; + + enum mantis_i2c_mode i2c_mode; +}; + +struct mantis_pci { + unsigned int verbose; + + /* PCI stuff */ + u16 vendor_id; + u16 device_id; + u16 subsystem_vendor; + u16 subsystem_device; + + u8 latency; + + struct pci_dev *pdev; + + unsigned long mantis_addr; + void __iomem *mmio; + + u8 irq; + u8 revision; + + unsigned int num; + + /* RISC Core */ + u32 busy_block; + u32 last_block; + u8 *buf_cpu; + dma_addr_t buf_dma; + u32 *risc_cpu; + dma_addr_t risc_dma; + + struct tasklet_struct tasklet; + + struct i2c_adapter adapter; + int i2c_rc; + wait_queue_head_t i2c_wq; + struct mutex i2c_lock; + + /* DVB stuff */ + struct dvb_adapter dvb_adapter; + struct dvb_frontend *fe; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net dvbnet; + + u8 feeds; + + struct mantis_hwconfig *hwconfig; + + u32 mantis_int_stat; + u32 mantis_int_mask; + + /* board specific */ + u8 mac_address[8]; + u32 sub_vendor_id; + u32 sub_device_id; + + /* A12 A13 A14 */ + u32 gpio_status; + + u32 gpif_status; + + struct mantis_ca *mantis_ca; + + wait_queue_head_t uart_wq; + struct work_struct uart_work; + spinlock_t uart_lock; + + struct rc_dev *rc; + char input_name[80]; + char input_phys[80]; +}; + +#define MANTIS_HIF_STATUS (mantis->gpio_status) + +#endif /* __MANTIS_COMMON_H */ diff --git a/drivers/media/pci/mantis/mantis_core.c b/drivers/media/pci/mantis/mantis_core.c new file mode 100644 index 00000000..684d9061 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_core.c @@ -0,0 +1,235 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_core.h" +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp1041.h" +#include "mantis_vp2033.h" +#include "mantis_vp2040.h" +#include "mantis_vp3030.h" + +static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + int err; + struct i2c_msg msg[] = { + { + .addr = 0x50, + .flags = 0, + .buf = data, + .len = 1 + }, { + .addr = 0x50, + .flags = I2C_M_RD, + .buf = data, + .len = length + }, + }; + + err = i2c_transfer(&mantis->adapter, msg, 2); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", + err, data[0], data[1]); + + return err; + } + + return 0; +} + +static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + int err; + + struct i2c_msg msg = { + .addr = 0x50, + .flags = 0, + .buf = data, + .len = length + }; + + err = i2c_transfer(&mantis->adapter, &msg, 1); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >", + err, length, data[0], data[1]); + + return err; + } + + return 0; +} + +static int get_mac_address(struct mantis_pci *mantis) +{ + int err; + + mantis->mac_address[0] = 0x08; + err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); + + return err; + } + dprintk(verbose, MANTIS_ERROR, 0, + " MAC Address=[%pM]\n", mantis->mac_address); + + return 0; +} + +#define MANTIS_MODEL_UNKNOWN "UNKNOWN" +#define MANTIS_DEV_UNKNOWN "UNKNOWN" + +struct mantis_hwconfig unknown_device = { + .model_name = MANTIS_MODEL_UNKNOWN, + .dev_type = MANTIS_DEV_UNKNOWN, +}; + +static void mantis_load_config(struct mantis_pci *mantis) +{ + switch (mantis->subsystem_device) { + case MANTIS_VP_1033_DVB_S: /* VP-1033 */ + mantis->hwconfig = &vp1033_mantis_config; + break; + case MANTIS_VP_1034_DVB_S: /* VP-1034 */ + mantis->hwconfig = &vp1034_mantis_config; + break; + case MANTIS_VP_1041_DVB_S2: /* VP-1041 */ + case TECHNISAT_SKYSTAR_HD2: + mantis->hwconfig = &vp1041_mantis_config; + break; + case MANTIS_VP_2033_DVB_C: /* VP-2033 */ + mantis->hwconfig = &vp2033_mantis_config; + break; + case MANTIS_VP_2040_DVB_C: /* VP-2040 */ + case CINERGY_C: /* VP-2040 clone */ + case TECHNISAT_CABLESTAR_HD2: + mantis->hwconfig = &vp2040_mantis_config; + break; + case MANTIS_VP_3030_DVB_T: /* VP-3030 */ + mantis->hwconfig = &vp3030_mantis_config; + break; + default: + mantis->hwconfig = &unknown_device; + break; + } +} + +int mantis_core_init(struct mantis_pci *mantis) +{ + int err = 0; + + mantis_load_config(mantis); + dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", + mantis->hwconfig->model_name, mantis->hwconfig->dev_type, + mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn)); + dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", + mantis->revision, + mantis->subsystem_vendor, mantis->subsystem_device); + dprintk(verbose, MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + mantis->pdev->irq, mantis->latency, + mantis->mantis_addr, mantis->mantis_mmio); + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed"); + return err; + } + err = get_mac_address(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed"); + return err; + } + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed"); + return err; + } + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed"); + return err; + } + err = mantis_uart_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed"); + return err; + } + + return 0; +} + +int mantis_core_exit(struct mantis_pci *mantis) +{ + mantis_dma_stop(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping"); + + mantis_uart_exit(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed"); + + if (mantis_dma_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed"); + if (mantis_dvb_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed"); + if (mantis_i2c_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed"); + + return 0; +} + +/* Turn the given bit on or off. */ +void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) +{ + u32 cur; + + cur = mmread(MANTIS_GPIF_ADDR); + if (value) + mantis->gpio_status = cur | (1 << bitpos); + else + mantis->gpio_status = cur & (~(1 << bitpos)); + + mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); + udelay(100); +} + +/* direction = 0 , no CI passthrough ; 1 , CI passthrough */ +void mantis_set_direction(struct mantis_pci *mantis, int direction) +{ + u32 reg; + + reg = mmread(0x28); + dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup"); + if (direction == 0x01) { + /* to CI */ + reg |= 0x04; + mmwrite(reg, 0x28); + reg &= 0xff - 0x04; + mmwrite(reg, 0x28); + } else { + reg &= 0xff - 0x04; + mmwrite(reg, 0x28); + reg |= 0x04; + mmwrite(reg, 0x28); + } +} diff --git a/drivers/media/pci/mantis/mantis_core.h b/drivers/media/pci/mantis/mantis_core.h new file mode 100644 index 00000000..833ee42e --- /dev/null +++ b/drivers/media/pci/mantis/mantis_core.h @@ -0,0 +1,57 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_CORE_H +#define __MANTIS_CORE_H + +#include "mantis_common.h" + + +#define FE_TYPE_SAT 0 +#define FE_TYPE_CAB 1 +#define FE_TYPE_TER 2 + +#define FE_TYPE_TS204 0 +#define FE_TYPE_TS188 1 + + +struct vendorname { + u8 *sub_vendor_name; + u32 sub_vendor_id; +}; + +struct devicetype { + u8 *sub_device_name; + u32 sub_device_id; + u8 device_type; + u32 type_flags; +}; + + +extern int mantis_dma_init(struct mantis_pci *mantis); +extern int mantis_dma_exit(struct mantis_pci *mantis); +extern void mantis_dma_start(struct mantis_pci *mantis); +extern void mantis_dma_stop(struct mantis_pci *mantis); +extern int mantis_i2c_init(struct mantis_pci *mantis); +extern int mantis_i2c_exit(struct mantis_pci *mantis); +extern int mantis_core_init(struct mantis_pci *mantis); +extern int mantis_core_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_CORE_H */ diff --git a/drivers/media/pci/mantis/mantis_dma.c b/drivers/media/pci/mantis/mantis_dma.c new file mode 100644 index 00000000..566c4071 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_dma.c @@ -0,0 +1,230 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_dma.h" + +#define RISC_WRITE (0x01 << 28) +#define RISC_JUMP (0x07 << 28) +#define RISC_IRQ (0x01 << 24) + +#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16)) +#define RISC_FLUSH(risc_pos) (risc_pos = 0) +#define RISC_INSTR(risc_pos, opcode) (mantis->risc_cpu[risc_pos++] = cpu_to_le32(opcode)) + +#define MANTIS_BUF_SIZE (64 * 1024) +#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE / 4) +#define MANTIS_DMA_TR_BYTES (2 * 1024) /* upper limit: 4095 bytes. */ +#define MANTIS_BLOCK_COUNT (MANTIS_BUF_SIZE / MANTIS_BLOCK_BYTES) + +#define MANTIS_DMA_TR_UNITS (MANTIS_BLOCK_BYTES / MANTIS_DMA_TR_BYTES) +/* MANTIS_BUF_SIZE / MANTIS_DMA_TR_UNITS must not exceed MANTIS_RISC_SIZE (4k RISC cmd buffer) */ +#define MANTIS_RISC_SIZE PAGE_SIZE /* RISC program must fit here. */ + +int mantis_dma_exit(struct mantis_pci *mantis) +{ + if (mantis->buf_cpu) { + dprintk(MANTIS_ERROR, 1, + "DMA=0x%lx cpu=0x%p size=%d", + (unsigned long) mantis->buf_dma, + mantis->buf_cpu, + MANTIS_BUF_SIZE); + + pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE, + mantis->buf_cpu, mantis->buf_dma); + + mantis->buf_cpu = NULL; + } + if (mantis->risc_cpu) { + dprintk(MANTIS_ERROR, 1, + "RISC=0x%lx cpu=0x%p size=%lx", + (unsigned long) mantis->risc_dma, + mantis->risc_cpu, + MANTIS_RISC_SIZE); + + pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE, + mantis->risc_cpu, mantis->risc_dma); + + mantis->risc_cpu = NULL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_dma_exit); + +static inline int mantis_alloc_buffers(struct mantis_pci *mantis) +{ + if (!mantis->buf_cpu) { + mantis->buf_cpu = pci_alloc_consistent(mantis->pdev, + MANTIS_BUF_SIZE, + &mantis->buf_dma); + if (!mantis->buf_cpu) { + dprintk(MANTIS_ERROR, 1, + "DMA buffer allocation failed"); + + goto err; + } + dprintk(MANTIS_ERROR, 1, + "DMA=0x%lx cpu=0x%p size=%d", + (unsigned long) mantis->buf_dma, + mantis->buf_cpu, MANTIS_BUF_SIZE); + } + if (!mantis->risc_cpu) { + mantis->risc_cpu = pci_alloc_consistent(mantis->pdev, + MANTIS_RISC_SIZE, + &mantis->risc_dma); + + if (!mantis->risc_cpu) { + dprintk(MANTIS_ERROR, 1, + "RISC program allocation failed"); + + mantis_dma_exit(mantis); + + goto err; + } + dprintk(MANTIS_ERROR, 1, + "RISC=0x%lx cpu=0x%p size=%lx", + (unsigned long) mantis->risc_dma, + mantis->risc_cpu, MANTIS_RISC_SIZE); + } + + return 0; +err: + dprintk(MANTIS_ERROR, 1, "Out of memory (?) ....."); + return -ENOMEM; +} + +int mantis_dma_init(struct mantis_pci *mantis) +{ + int err = 0; + + dprintk(MANTIS_DEBUG, 1, "Mantis DMA init"); + if (mantis_alloc_buffers(mantis) < 0) { + dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer"); + + /* Stop RISC Engine */ + mmwrite(0, MANTIS_DMA_CTL); + + goto err; + } + + return 0; +err: + return err; +} +EXPORT_SYMBOL_GPL(mantis_dma_init); + +static inline void mantis_risc_program(struct mantis_pci *mantis) +{ + u32 buf_pos = 0; + u32 line, step; + u32 risc_pos; + + dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program"); + RISC_FLUSH(risc_pos); + + dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u, bytes per DMA tr %u", + MANTIS_BLOCK_COUNT, MANTIS_BLOCK_BYTES, MANTIS_DMA_TR_BYTES); + + for (line = 0; line < MANTIS_BLOCK_COUNT; line++) { + for (step = 0; step < MANTIS_DMA_TR_UNITS; step++) { + dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d], step=[%d]", line, step); + if (step == 0) { + RISC_INSTR(risc_pos, RISC_WRITE | + RISC_IRQ | + RISC_STATUS(line) | + MANTIS_DMA_TR_BYTES); + } else { + RISC_INSTR(risc_pos, RISC_WRITE | MANTIS_DMA_TR_BYTES); + } + RISC_INSTR(risc_pos, mantis->buf_dma + buf_pos); + buf_pos += MANTIS_DMA_TR_BYTES; + } + } + RISC_INSTR(risc_pos, RISC_JUMP); + RISC_INSTR(risc_pos, mantis->risc_dma); +} + +void mantis_dma_start(struct mantis_pci *mantis) +{ + dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine"); + + mantis_risc_program(mantis); + mmwrite(mantis->risc_dma, MANTIS_RISC_START); + mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + mmwrite(0, MANTIS_DMA_CTL); + mantis->last_block = mantis->busy_block = 0; + + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK); + + mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN + | MANTIS_RISC_EN, MANTIS_DMA_CTL); + +} + +void mantis_dma_stop(struct mantis_pci *mantis) +{ + dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); + + mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR); + + mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN | + MANTIS_DCAP_EN | + MANTIS_RISC_EN)), MANTIS_DMA_CTL); + + mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT); + + mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI | + MANTIS_INT_RISCEN), MANTIS_INT_MASK); +} + + +void mantis_dma_xfer(unsigned long data) +{ + struct mantis_pci *mantis = (struct mantis_pci *) data; + struct mantis_hwconfig *config = mantis->hwconfig; + + while (mantis->last_block != mantis->busy_block) { + dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]", + mantis->last_block, mantis->busy_block); + + (config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter) + (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES); + mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT; + } +} diff --git a/drivers/media/pci/mantis/mantis_dma.h b/drivers/media/pci/mantis/mantis_dma.h new file mode 100644 index 00000000..6be00fa8 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_dma.h @@ -0,0 +1,30 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_DMA_H +#define __MANTIS_DMA_H + +extern int mantis_dma_init(struct mantis_pci *mantis); +extern int mantis_dma_exit(struct mantis_pci *mantis); +extern void mantis_dma_start(struct mantis_pci *mantis); +extern void mantis_dma_stop(struct mantis_pci *mantis); +extern void mantis_dma_xfer(unsigned long data); + +#endif /* __MANTIS_DMA_H */ diff --git a/drivers/media/pci/mantis/mantis_dvb.c b/drivers/media/pci/mantis/mantis_dvb.c new file mode 100644 index 00000000..5a71e179 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_dvb.c @@ -0,0 +1,301 @@ +/* + Mantis PCI bridge driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include + +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + + switch (power) { + case POWER_ON: + dprintk(MANTIS_DEBUG, 1, "Power ON"); + mantis_gpio_set_bits(mantis, config->power, POWER_ON); + msleep(100); + mantis_gpio_set_bits(mantis, config->power, POWER_ON); + msleep(100); + break; + + case POWER_OFF: + dprintk(MANTIS_DEBUG, 1, "Power OFF"); + mantis_gpio_set_bits(mantis, config->power, POWER_OFF); + msleep(100); + break; + + default: + dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power); + return -1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_frontend_power); + +void mantis_frontend_soft_reset(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + + dprintk(MANTIS_DEBUG, 1, "Frontend RESET"); + mantis_gpio_set_bits(mantis, config->reset, 0); + msleep(100); + mantis_gpio_set_bits(mantis, config->reset, 0); + msleep(100); + mantis_gpio_set_bits(mantis, config->reset, 1); + msleep(100); + mantis_gpio_set_bits(mantis, config->reset, 1); + msleep(100); + + return; +} +EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset); + +static int mantis_frontend_shutdown(struct mantis_pci *mantis) +{ + int err; + + mantis_frontend_soft_reset(mantis); + err = mantis_frontend_power(mantis, POWER_OFF); + if (err != 0) { + dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err); + return 1; + } + + return 0; +} + +static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct mantis_pci *mantis = dvbdmx->priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed"); + if (!dvbdmx->dmx.frontend) { + dprintk(MANTIS_DEBUG, 1, "no frontend ?"); + return -EINVAL; + } + + mantis->feeds++; + dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds); + + if (mantis->feeds == 1) { + dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma"); + mantis_dma_start(mantis); + tasklet_enable(&mantis->tasklet); + } + + return mantis->feeds; +} + +static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct mantis_pci *mantis = dvbdmx->priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed"); + if (!dvbdmx->dmx.frontend) { + dprintk(MANTIS_DEBUG, 1, "no frontend ?"); + return -EINVAL; + } + + mantis->feeds--; + if (mantis->feeds == 0) { + dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma"); + tasklet_disable(&mantis->tasklet); + mantis_dma_stop(mantis); + } + + return 0; +} + +int mantis_dvb_init(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + int result = -1; + + dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter"); + + result = dvb_register_adapter(&mantis->dvb_adapter, + "Mantis DVB adapter", + THIS_MODULE, + &mantis->pdev->dev, + adapter_nr); + + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "Error registering adapter"); + return -ENODEV; + } + + mantis->dvb_adapter.priv = mantis; + mantis->demux.dmx.capabilities = DMX_TS_FILTERING | + DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + + mantis->demux.priv = mantis; + mantis->demux.filternum = 256; + mantis->demux.feednum = 256; + mantis->demux.start_feed = mantis_dvb_start_feed; + mantis->demux.stop_feed = mantis_dvb_stop_feed; + mantis->demux.write_to_decoder = NULL; + + dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init"); + result = dvb_dmx_init(&mantis->demux); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + + goto err0; + } + + mantis->dmxdev.filternum = 256; + mantis->dmxdev.demux = &mantis->demux.dmx; + mantis->dmxdev.capabilities = 0; + dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init"); + + result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter); + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result); + goto err1; + } + + mantis->fe_hw.source = DMX_FRONTEND_0; + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw); + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err2; + } + + mantis->fe_mem.source = DMX_MEMORY_FE; + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err3; + } + + result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err4; + } + + dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx); + tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis); + tasklet_disable(&mantis->tasklet); + if (mantis->hwconfig) { + result = config->frontend_init(mantis, mantis->fe); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!"); + goto err5; + } else { + if (mantis->fe == NULL) { + dprintk(MANTIS_ERROR, 1, "FE "); + goto err5; + } + + if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) { + dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed"); + + if (mantis->fe->ops.release) + mantis->fe->ops.release(mantis->fe); + + mantis->fe = NULL; + goto err5; + } + } + } + + return 0; + + /* Error conditions .. */ +err5: + tasklet_kill(&mantis->tasklet); + dvb_net_release(&mantis->dvbnet); + if (mantis->fe) { + dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); + } +err4: + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); + +err3: + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + +err2: + dvb_dmxdev_release(&mantis->dmxdev); + +err1: + dvb_dmx_release(&mantis->demux); + +err0: + dvb_unregister_adapter(&mantis->dvb_adapter); + + return result; +} +EXPORT_SYMBOL_GPL(mantis_dvb_init); + +int mantis_dvb_exit(struct mantis_pci *mantis) +{ + int err; + + if (mantis->fe) { + /* mantis_ca_exit(mantis); */ + err = mantis_frontend_shutdown(mantis); + if (err != 0) + dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); + dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); + } + + tasklet_kill(&mantis->tasklet); + dvb_net_release(&mantis->dvbnet); + + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + + dvb_dmxdev_release(&mantis->dmxdev); + dvb_dmx_release(&mantis->demux); + + dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter"); + dvb_unregister_adapter(&mantis->dvb_adapter); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_dvb_exit); diff --git a/drivers/media/pci/mantis/mantis_dvb.h b/drivers/media/pci/mantis/mantis_dvb.h new file mode 100644 index 00000000..464199db --- /dev/null +++ b/drivers/media/pci/mantis/mantis_dvb.h @@ -0,0 +1,35 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_DVB_H +#define __MANTIS_DVB_H + +enum mantis_power { + POWER_OFF = 0, + POWER_ON = 1 +}; + +extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power); +extern void mantis_frontend_soft_reset(struct mantis_pci *mantis); + +extern int mantis_dvb_init(struct mantis_pci *mantis); +extern int mantis_dvb_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_DVB_H */ diff --git a/drivers/media/pci/mantis/mantis_evm.c b/drivers/media/pci/mantis/mantis_evm.c new file mode 100644 index 00000000..909ff548 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_evm.c @@ -0,0 +1,117 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" +#include "mantis_hif.h" +#include "mantis_reg.h" + +static void mantis_hifevm_work(struct work_struct *work) +{ + struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work); + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_stat; + + gpif_stat = mmread(MANTIS_GPIF_STATUS); + + if (gpif_stat & MANTIS_GPIF_DETSTAT) { + if (gpif_stat & MANTIS_CARD_PLUGIN) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); + mmwrite(0xdada0000, MANTIS_CARD_RESET); + mantis_event_cam_plugin(ca); + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + } + } else { + if (gpif_stat & MANTIS_CARD_PLUGOUT) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); + mmwrite(0xdada0000, MANTIS_CARD_RESET); + mantis_event_cam_unplug(ca); + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + } + + if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); + + if (mantis->gpif_status & MANTIS_SBUF_WSTO) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); + + if (mantis->gpif_status & MANTIS_GPIF_OTHERR) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); + + if (gpif_stat & MANTIS_SBUF_OVFLW) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); + + if (gpif_stat & MANTIS_GPIF_BRRDY) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); + + if (gpif_stat & MANTIS_GPIF_INTSTAT) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); + + if (gpif_stat & MANTIS_SBUF_EMPTY) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); + + if (gpif_stat & MANTIS_SBUF_OPDONE) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); + ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; + ca->hif_event = MANTIS_SBUF_OPDONE; + wake_up(&ca->hif_opdone_wq); + } +} + +int mantis_evmgr_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); + INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work); + mantis_pcmcia_init(ca); + schedule_work(&ca->hif_evm_work); + mantis_hif_init(ca); + return 0; +} + +void mantis_evmgr_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); + flush_work(&ca->hif_evm_work); + mantis_hif_exit(ca); + mantis_pcmcia_exit(ca); +} diff --git a/drivers/media/pci/mantis/mantis_hif.c b/drivers/media/pci/mantis/mantis_hif.c new file mode 100644 index 00000000..10c68df7 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_hif.c @@ -0,0 +1,239 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" + +#include "mantis_hif.h" +#include "mantis_link.h" /* temporary due to physical layer stuff */ + +#include "mantis_reg.h" + + +static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + int rc = 0; + + if (wait_event_timeout(ca->hif_opdone_wq, + ca->hif_event & MANTIS_SBUF_OPDONE, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); + rc = -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete"); + ca->hif_event &= ~MANTIS_SBUF_OPDONE; + return rc; +} + +static int mantis_hif_write_wait(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 opdone = 0, timeout = 0; + int rc = 0; + + if (wait_event_timeout(ca->hif_write_wq, + mantis->gpif_status & MANTIS_GPIF_WRACK, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num); + rc = -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Write Acknowledged"); + mantis->gpif_status &= ~MANTIS_GPIF_WRACK; + while (!opdone) { + opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE); + udelay(500); + timeout++; + if (timeout > 100) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write operation timed out!", mantis->num); + rc = -ETIMEDOUT; + break; + } + } + dprintk(MANTIS_DEBUG, 1, "HIF Write success"); + return rc; +} + + +int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0, data, count = 4; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); + mmwrite(count, MANTIS_GPIF_BRBYTES); + udelay(20); + mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + data = mmread(MANTIS_GPIF_DIN); + mutex_unlock(&ca->ca_lock); + dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data); + return (data >> 24) & 0xff; +} + +int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) +{ + struct mantis_slot *slot = ca->slot; + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_HIFRDWRN; + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */ + mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(data, MANTIS_GPIF_DOUT); + + if (mantis_hif_write_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr); + mutex_unlock(&ca->ca_lock); + + return 0; +} + +int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 data, hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); + mmwrite(1, MANTIS_GPIF_BRBYTES); + udelay(20); + mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + data = mmread(MANTIS_GPIF_DIN); + dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); + udelay(50); + mutex_unlock(&ca->ca_lock); + + return (u8) data; +} + +int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_HIFRDWRN; + hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(data, MANTIS_GPIF_DOUT); + + if (mantis_hif_write_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); + mutex_unlock(&ca->ca_lock); + udelay(50); + + return 0; +} + +int mantis_hif_init(struct mantis_ca *ca) +{ + struct mantis_slot *slot = ca->slot; + struct mantis_pci *mantis = ca->ca_priv; + u32 irqcfg; + + slot[0].slave_cfg = 0x70773028; + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); + + mutex_lock(&ca->ca_lock); + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg = MANTIS_MASK_BRRDY | + MANTIS_MASK_WRACK | + MANTIS_MASK_EXTIRQ | + MANTIS_MASK_WSTO | + MANTIS_MASK_OTHERR | + MANTIS_MASK_OVFLW; + + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + mutex_unlock(&ca->ca_lock); + + return 0; +} + +void mantis_hif_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 irqcfg; + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num); + mutex_lock(&ca->ca_lock); + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg &= ~MANTIS_MASK_BRRDY; + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + mutex_unlock(&ca->ca_lock); +} diff --git a/drivers/media/pci/mantis/mantis_hif.h b/drivers/media/pci/mantis/mantis_hif.h new file mode 100644 index 00000000..9094f9ed --- /dev/null +++ b/drivers/media/pci/mantis/mantis_hif.h @@ -0,0 +1,29 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_HIF_H +#define __MANTIS_HIF_H + +#define MANTIS_HIF_MEMRD 1 +#define MANTIS_HIF_MEMWR 2 +#define MANTIS_HIF_IOMRD 3 +#define MANTIS_HIF_IOMWR 4 + +#endif /* __MANTIS_HIF_H */ diff --git a/drivers/media/pci/mantis/mantis_i2c.c b/drivers/media/pci/mantis/mantis_i2c.c new file mode 100644 index 00000000..895ddba3 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_i2c.c @@ -0,0 +1,268 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_i2c.h" + +#define TRIALS 10000 + +static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) +{ + u32 rxd, i, stat, trials; + + dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", + __func__, msg->addr); + + for (i = 0; i < msg->len; i++) { + rxd = (msg->addr << 25) | (1 << 24) + | MANTIS_I2C_RATE_3 + | MANTIS_I2C_STOP + | MANTIS_I2C_PGMODE; + + if (i == (msg->len - 1)) + rxd &= ~MANTIS_I2C_STOP; + + mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); + mmwrite(rxd, MANTIS_I2CDATA_CTL); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); + + rxd = mmread(MANTIS_I2CDATA_CTL); + msg->buf[i] = (u8)((rxd >> 8) & 0xFF); + dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); + } + dprintk(MANTIS_INFO, 0, "]\n"); + + return 0; +} + +static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg) +{ + int i; + u32 txd = 0, stat, trials; + + dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", + __func__, msg->addr); + + for (i = 0; i < msg->len; i++) { + dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); + txd = (msg->addr << 25) | (msg->buf[i] << 8) + | MANTIS_I2C_RATE_3 + | MANTIS_I2C_STOP + | MANTIS_I2C_PGMODE; + + if (i == (msg->len - 1)) + txd &= ~MANTIS_I2C_STOP; + + mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); + mmwrite(txd, MANTIS_I2CDATA_CTL); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); + } + dprintk(MANTIS_INFO, 0, "]\n"); + + return 0; +} + +static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +{ + int ret = 0, i = 0, trials; + u32 stat, data, txd; + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + + mantis = i2c_get_adapdata(adapter); + BUG_ON(!mantis); + config = mantis->hwconfig; + BUG_ON(!config); + + dprintk(MANTIS_DEBUG, 1, "Messages:%d", num); + mutex_lock(&mantis->i2c_lock); + + while (i < num) { + /* Byte MODE */ + if ((config->i2c_mode & MANTIS_BYTE_MODE) && + ((i + 1) < num) && + (msgs[i].len < 2) && + (msgs[i + 1].len < 2) && + (msgs[i + 1].flags & I2C_M_RD)) { + + dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n"); + + /* Read operation */ + txd = msgs[i].addr << 25 | (0x1 << 24) + | (msgs[i].buf[0] << 16) + | MANTIS_I2C_RATE_3; + + mmwrite(txd, MANTIS_I2CDATA_CTL); + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + /* check for xfer completion */ + if (stat & MANTIS_INT_I2CDONE) { + /* check xfer was acknowledged */ + if (stat & MANTIS_INT_I2CRACK) { + data = mmread(MANTIS_I2CDATA_CTL); + msgs[i + 1].buf[0] = (data >> 8) & 0xff; + dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]); + } else { + /* I/O error */ + dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); + ret = -EIO; + break; + } + } else { + /* I/O error */ + dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); + ret = -EIO; + break; + } + i += 2; /* Write/Read operation in one go */ + } + + if (i < num) { + if (msgs[i].flags & I2C_M_RD) + ret = mantis_i2c_read(mantis, &msgs[i]); + else + ret = mantis_i2c_write(mantis, &msgs[i]); + + i++; + if (ret < 0) + goto bail_out; + } + + } + + mutex_unlock(&mantis->i2c_lock); + + return num; + +bail_out: + mutex_unlock(&mantis->i2c_lock); + return ret; +} + +static u32 mantis_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm mantis_algo = { + .master_xfer = mantis_i2c_xfer, + .functionality = mantis_i2c_func, +}; + +int mantis_i2c_init(struct mantis_pci *mantis) +{ + u32 intstat, intmask; + struct i2c_adapter *i2c_adapter = &mantis->adapter; + struct pci_dev *pdev = mantis->pdev; + + init_waitqueue_head(&mantis->i2c_wq); + mutex_init(&mantis->i2c_lock); + strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name)); + i2c_set_adapdata(i2c_adapter, mantis); + + i2c_adapter->owner = THIS_MODULE; + i2c_adapter->algo = &mantis_algo; + i2c_adapter->algo_data = NULL; + i2c_adapter->timeout = 500; + i2c_adapter->retries = 3; + i2c_adapter->dev.parent = &pdev->dev; + + mantis->i2c_rc = i2c_add_adapter(i2c_adapter); + if (mantis->i2c_rc < 0) + return mantis->i2c_rc; + + dprintk(MANTIS_DEBUG, 1, "Initializing I2C .."); + + intstat = mmread(MANTIS_INT_STAT); + intmask = mmread(MANTIS_INT_MASK); + mmwrite(intstat, MANTIS_INT_STAT); + dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); + intmask = mmread(MANTIS_INT_MASK); + mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_i2c_init); + +int mantis_i2c_exit(struct mantis_pci *mantis) +{ + u32 intmask; + + dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); + intmask = mmread(MANTIS_INT_MASK); + mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); + + dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter"); + i2c_del_adapter(&mantis->adapter); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_i2c_exit); diff --git a/drivers/media/pci/mantis/mantis_i2c.h b/drivers/media/pci/mantis/mantis_i2c.h new file mode 100644 index 00000000..1342df2f --- /dev/null +++ b/drivers/media/pci/mantis/mantis_i2c.h @@ -0,0 +1,30 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_I2C_H +#define __MANTIS_I2C_H + +#define I2C_STOP (1 << 0) +#define I2C_READ (1 << 1) + +extern int mantis_i2c_init(struct mantis_pci *mantis); +extern int mantis_i2c_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_I2C_H */ diff --git a/drivers/media/pci/mantis/mantis_input.c b/drivers/media/pci/mantis/mantis_input.c new file mode 100644 index 00000000..0e5252e5 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_input.c @@ -0,0 +1,162 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#if 0 /* Currently unused */ + +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_uart.h" + +#define MODULE_NAME "mantis_core" +#define RC_MAP_MANTIS "rc-mantis" + +static struct rc_map_table mantis_ir_table[] = { + { 0x29, KEY_POWER }, + { 0x28, KEY_FAVORITES }, + { 0x30, KEY_TEXT }, + { 0x17, KEY_INFO }, /* Preview */ + { 0x23, KEY_EPG }, + { 0x3b, KEY_F22 }, /* Record List */ + { 0x3c, KEY_1 }, + { 0x3e, KEY_2 }, + { 0x39, KEY_3 }, + { 0x36, KEY_4 }, + { 0x22, KEY_5 }, + { 0x20, KEY_6 }, + { 0x32, KEY_7 }, + { 0x26, KEY_8 }, + { 0x24, KEY_9 }, + { 0x2a, KEY_0 }, + + { 0x33, KEY_CANCEL }, + { 0x2c, KEY_BACK }, + { 0x15, KEY_CLEAR }, + { 0x3f, KEY_TAB }, + { 0x10, KEY_ENTER }, + { 0x14, KEY_UP }, + { 0x0d, KEY_RIGHT }, + { 0x0e, KEY_DOWN }, + { 0x11, KEY_LEFT }, + + { 0x21, KEY_VOLUMEUP }, + { 0x35, KEY_VOLUMEDOWN }, + { 0x3d, KEY_CHANNELDOWN }, + { 0x3a, KEY_CHANNELUP }, + { 0x2e, KEY_RECORD }, + { 0x2b, KEY_PLAY }, + { 0x13, KEY_PAUSE }, + { 0x25, KEY_STOP }, + + { 0x1f, KEY_REWIND }, + { 0x2d, KEY_FASTFORWARD }, + { 0x1e, KEY_PREVIOUS }, /* Replay |< */ + { 0x1d, KEY_NEXT }, /* Skip >| */ + + { 0x0b, KEY_CAMERA }, /* Capture */ + { 0x0f, KEY_LANGUAGE }, /* SAP */ + { 0x18, KEY_MODE }, /* PIP */ + { 0x12, KEY_ZOOM }, /* Full screen */ + { 0x1c, KEY_SUBTITLE }, + { 0x2f, KEY_MUTE }, + { 0x16, KEY_F20 }, /* L/R */ + { 0x38, KEY_F21 }, /* Hibernate */ + + { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */ + { 0x31, KEY_AGAIN }, /* Recall */ + { 0x1a, KEY_KPPLUS }, /* Zoom+ */ + { 0x19, KEY_KPMINUS }, /* Zoom- */ + { 0x27, KEY_RED }, + { 0x0C, KEY_GREEN }, + { 0x01, KEY_YELLOW }, + { 0x00, KEY_BLUE }, +}; + +static struct rc_map_list ir_mantis_map = { + .map = { + .scan = mantis_ir_table, + .size = ARRAY_SIZE(mantis_ir_table), + .rc_type = RC_TYPE_UNKNOWN, + .name = RC_MAP_MANTIS, + } +}; + +int mantis_input_init(struct mantis_pci *mantis) +{ + struct rc_dev *dev; + int err; + + err = rc_map_register(&ir_mantis_map); + if (err) + goto out; + + dev = rc_allocate_device(); + if (!dev) { + dprintk(MANTIS_ERROR, 1, "Remote device allocation failed"); + err = -ENOMEM; + goto out_map; + } + + sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name); + sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev)); + + dev->input_name = mantis->input_name; + dev->input_phys = mantis->input_phys; + dev->input_id.bustype = BUS_PCI; + dev->input_id.vendor = mantis->vendor_id; + dev->input_id.product = mantis->device_id; + dev->input_id.version = 1; + dev->driver_name = MODULE_NAME; + dev->map_name = RC_MAP_MANTIS; + dev->dev.parent = &mantis->pdev->dev; + + err = rc_register_device(dev); + if (err) { + dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err); + goto out_dev; + } + + mantis->rc = dev; + return 0; + +out_dev: + rc_free_device(dev); +out_map: + rc_map_unregister(&ir_mantis_map); +out: + return err; +} + +int mantis_init_exit(struct mantis_pci *mantis) +{ + rc_unregister_device(mantis->rc); + rc_map_unregister(&ir_mantis_map); + return 0; +} + +#endif diff --git a/drivers/media/pci/mantis/mantis_ioc.c b/drivers/media/pci/mantis/mantis_ioc.c new file mode 100644 index 00000000..24fcdc63 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_ioc.c @@ -0,0 +1,124 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_ioc.h" + +static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length) +{ + struct i2c_adapter *adapter = &mantis->adapter; + int err; + u8 buf = reg; + + struct i2c_msg msg[] = { + { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 }, + { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length }, + }; + + err = i2c_transfer(adapter, msg, 2); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", + err, data[0], data[1]); + + return err; + } + + return 0; +} +int mantis_get_mac(struct mantis_pci *mantis) +{ + int err; + u8 mac_addr[6] = {0}; + + err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err); + + return err; + } + + dprintk(MANTIS_ERROR, 0, " MAC Address=[%pM]\n", mac_addr); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_get_mac); + +/* Turn the given bit on or off. */ +void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) +{ + u32 cur; + + dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value); + cur = mmread(MANTIS_GPIF_ADDR); + if (value) + mantis->gpio_status = cur | (1 << bitpos); + else + mantis->gpio_status = cur & (~(1 << bitpos)); + + dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status); + mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); +} +EXPORT_SYMBOL_GPL(mantis_gpio_set_bits); + +int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl) +{ + u32 reg; + + reg = mmread(MANTIS_CONTROL); + switch (stream_ctl) { + case STREAM_TO_HIF: + dprintk(MANTIS_DEBUG, 1, "Set stream to HIF"); + reg &= 0xff - MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + reg |= MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + break; + + case STREAM_TO_CAM: + dprintk(MANTIS_DEBUG, 1, "Set stream to CAM"); + reg |= MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + reg &= 0xff - MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + break; + default: + dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl); + return -1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_stream_control); diff --git a/drivers/media/pci/mantis/mantis_ioc.h b/drivers/media/pci/mantis/mantis_ioc.h new file mode 100644 index 00000000..d56e002b --- /dev/null +++ b/drivers/media/pci/mantis/mantis_ioc.h @@ -0,0 +1,51 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_IOC_H +#define __MANTIS_IOC_H + +#define GPIF_A00 0x00 +#define GPIF_A01 0x01 +#define GPIF_A02 0x02 +#define GPIF_A03 0x03 +#define GPIF_A04 0x04 +#define GPIF_A05 0x05 +#define GPIF_A06 0x06 +#define GPIF_A07 0x07 +#define GPIF_A08 0x08 +#define GPIF_A09 0x09 +#define GPIF_A10 0x0a +#define GPIF_A11 0x0b + +#define GPIF_A12 0x0c +#define GPIF_A13 0x0d +#define GPIF_A14 0x0e + +enum mantis_stream_control { + STREAM_TO_HIF = 0, + STREAM_TO_CAM +}; + +extern int mantis_get_mac(struct mantis_pci *mantis); +extern void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); + +extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl); + +#endif /* __MANTIS_IOC_H */ diff --git a/drivers/media/pci/mantis/mantis_link.h b/drivers/media/pci/mantis/mantis_link.h new file mode 100644 index 00000000..2a814774 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_link.h @@ -0,0 +1,83 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_LINK_H +#define __MANTIS_LINK_H + +#include +#include +#include "dvb_ca_en50221.h" + +enum mantis_sbuf_status { + MANTIS_SBUF_DATA_AVAIL = 1, + MANTIS_SBUF_DATA_EMPTY = 2, + MANTIS_SBUF_DATA_OVFLW = 3 +}; + +struct mantis_slot { + u32 timeout; + u32 slave_cfg; + u32 bar; +}; + +/* Physical layer */ +enum mantis_slot_state { + MODULE_INSERTED = 3, + MODULE_XTRACTED = 4 +}; + +struct mantis_ca { + struct mantis_slot slot[4]; + + struct work_struct hif_evm_work; + + u32 hif_event; + wait_queue_head_t hif_opdone_wq; + wait_queue_head_t hif_brrdyw_wq; + wait_queue_head_t hif_data_wq; + wait_queue_head_t hif_write_wq; /* HIF Write op */ + + enum mantis_sbuf_status sbuf_status; + + enum mantis_slot_state slot_state; + + void *ca_priv; + + struct dvb_ca_en50221 en50221; + struct mutex ca_lock; +}; + +/* CA */ +extern void mantis_event_cam_plugin(struct mantis_ca *ca); +extern void mantis_event_cam_unplug(struct mantis_ca *ca); +extern int mantis_pcmcia_init(struct mantis_ca *ca); +extern void mantis_pcmcia_exit(struct mantis_ca *ca); +extern int mantis_evmgr_init(struct mantis_ca *ca); +extern void mantis_evmgr_exit(struct mantis_ca *ca); + +/* HIF */ +extern int mantis_hif_init(struct mantis_ca *ca); +extern void mantis_hif_exit(struct mantis_ca *ca); +extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr); +extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data); +extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr); +extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data); + +#endif /* __MANTIS_LINK_H */ diff --git a/drivers/media/pci/mantis/mantis_pci.c b/drivers/media/pci/mantis/mantis_pci.c new file mode 100644 index 00000000..a846036e --- /dev/null +++ b/drivers/media/pci/mantis/mantis_pci.c @@ -0,0 +1,170 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_pci.h" + +#define DRIVER_NAME "Mantis Core" + +int mantis_pci_init(struct mantis_pci *mantis) +{ + u8 latency; + struct mantis_hwconfig *config = mantis->hwconfig; + struct pci_dev *pdev = mantis->pdev; + int err, ret = 0; + + dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", + config->model_name, + config->dev_type, + mantis->pdev->bus->number, + PCI_SLOT(mantis->pdev->devfn), + PCI_FUNC(mantis->pdev->devfn)); + + err = pci_enable_device(pdev); + if (err != 0) { + ret = -ENODEV; + dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err); + goto fail0; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err != 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err); + ret = -ENOMEM; + goto fail1; + } + + pci_set_master(pdev); + + if (!request_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0), + DRIVER_NAME)) { + + dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !"); + ret = -ENODEV; + goto fail1; + } + + mantis->mmio = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + + if (!mantis->mmio) { + dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !"); + ret = -ENODEV; + goto fail2; + } + + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); + mantis->latency = latency; + mantis->revision = pdev->revision; + + dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", + mantis->revision, + mantis->pdev->subsystem_vendor, + mantis->pdev->subsystem_device); + + dprintk(MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + mantis->pdev->irq, + mantis->latency, + mantis->mantis_addr, + mantis->mmio); + + err = request_irq(pdev->irq, + config->irq_handler, + IRQF_SHARED, + DRIVER_NAME, + mantis); + + if (err != 0) { + + dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err); + ret = -ENODEV; + goto fail3; + } + + pci_set_drvdata(pdev, mantis); + return ret; + + /* Error conditions */ +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret); + if (mantis->mmio) + iounmap(mantis->mmio); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret); + pci_disable_device(pdev); + +fail0: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret); + pci_set_drvdata(pdev, NULL); + return ret; +} +EXPORT_SYMBOL_GPL(mantis_pci_init); + +void mantis_pci_exit(struct mantis_pci *mantis) +{ + struct pci_dev *pdev = mantis->pdev; + + dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio); + free_irq(pdev->irq, mantis); + if (mantis->mmio) { + iounmap(mantis->mmio); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + } + + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} +EXPORT_SYMBOL_GPL(mantis_pci_exit); + +MODULE_DESCRIPTION("Mantis PCI DTV bridge driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/mantis/mantis_pci.h b/drivers/media/pci/mantis/mantis_pci.h new file mode 100644 index 00000000..65f00451 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_pci.h @@ -0,0 +1,27 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_PCI_H +#define __MANTIS_PCI_H + +extern int mantis_pci_init(struct mantis_pci *mantis); +extern void mantis_pci_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_PCI_H */ diff --git a/drivers/media/pci/mantis/mantis_pcmcia.c b/drivers/media/pci/mantis/mantis_pcmcia.c new file mode 100644 index 00000000..2f188c08 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_pcmcia.c @@ -0,0 +1,121 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" /* temporary due to physical layer stuff */ +#include "mantis_reg.h" + +/* + * If Slot state is already PLUG_IN event and we are called + * again, definitely it is jitter alone + */ +void mantis_event_cam_plugin(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_irqcfg; + + if (ca->slot_state == MODULE_XTRACTED) { + dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num); + udelay(50); + mmwrite(0xda000000, MANTIS_CARD_RESET); + gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); + gpif_irqcfg |= MANTIS_MASK_PLUGOUT; + gpif_irqcfg &= ~MANTIS_MASK_PLUGIN; + mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG); + udelay(500); + ca->slot_state = MODULE_INSERTED; + } + udelay(100); +} + +/* + * If Slot state is already UN_PLUG event and we are called + * again, definitely it is jitter alone + */ +void mantis_event_cam_unplug(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_irqcfg; + + if (ca->slot_state == MODULE_INSERTED) { + dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num); + udelay(50); + mmwrite(0x00da0000, MANTIS_CARD_RESET); + gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); + gpif_irqcfg |= MANTIS_MASK_PLUGIN; + gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT; + mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG); + udelay(500); + ca->slot_state = MODULE_XTRACTED; + } + udelay(100); +} + +int mantis_pcmcia_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_stat, card_stat; + + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK); + gpif_stat = mmread(MANTIS_GPIF_STATUS); + card_stat = mmread(MANTIS_GPIF_IRQCFG); + + if (gpif_stat & MANTIS_GPIF_DETSTAT) { + dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); + mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG); + ca->slot_state = MODULE_INSERTED; + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + } else { + dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); + mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG); + ca->slot_state = MODULE_XTRACTED; + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + + return 0; +} + +void mantis_pcmcia_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS); + mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK); +} diff --git a/drivers/media/pci/mantis/mantis_reg.h b/drivers/media/pci/mantis/mantis_reg.h new file mode 100644 index 00000000..7761f9dc --- /dev/null +++ b/drivers/media/pci/mantis/mantis_reg.h @@ -0,0 +1,197 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_REG_H +#define __MANTIS_REG_H + +/* Interrupts */ +#define MANTIS_INT_STAT 0x00 +#define MANTIS_INT_MASK 0x04 + +#define MANTIS_INT_RISCSTAT (0x0f << 28) +#define MANTIS_INT_RISCEN (0x01 << 27) +#define MANTIS_INT_I2CRACK (0x01 << 26) + +/* #define MANTIS_INT_GPIF (0xff << 12) */ + +#define MANTIS_INT_PCMCIA7 (0x01 << 19) +#define MANTIS_INT_PCMCIA6 (0x01 << 18) +#define MANTIS_INT_PCMCIA5 (0x01 << 17) +#define MANTIS_INT_PCMCIA4 (0x01 << 16) +#define MANTIS_INT_PCMCIA3 (0x01 << 15) +#define MANTIS_INT_PCMCIA2 (0x01 << 14) +#define MANTIS_INT_PCMCIA1 (0x01 << 13) +#define MANTIS_INT_PCMCIA0 (0x01 << 12) +#define MANTIS_INT_IRQ1 (0x01 << 11) +#define MANTIS_INT_IRQ0 (0x01 << 10) +#define MANTIS_INT_OCERR (0x01 << 8) +#define MANTIS_INT_PABORT (0x01 << 7) +#define MANTIS_INT_RIPERR (0x01 << 6) +#define MANTIS_INT_PPERR (0x01 << 5) +#define MANTIS_INT_FTRGT (0x01 << 3) +#define MANTIS_INT_RISCI (0x01 << 1) +#define MANTIS_INT_I2CDONE (0x01 << 0) + +/* DMA */ +#define MANTIS_DMA_CTL 0x08 +#define MANTIS_GPIF_RD (0xff << 24) +#define MANTIS_GPIF_WR (0xff << 16) +#define MANTIS_CPU_DO (0x01 << 10) +#define MANTIS_DRV_DO (0x01 << 9) +#define MANTIS_I2C_RD (0x01 << 7) +#define MANTIS_I2C_WR (0x01 << 6) +#define MANTIS_DCAP_MODE (0x01 << 5) +#define MANTIS_FIFO_TP_4 (0x00 << 3) +#define MANTIS_FIFO_TP_8 (0x01 << 3) +#define MANTIS_FIFO_TP_16 (0x02 << 3) +#define MANTIS_FIFO_EN (0x01 << 2) +#define MANTIS_DCAP_EN (0x01 << 1) +#define MANTIS_RISC_EN (0x01 << 0) + +/* DEBUG */ +#define MANTIS_DEBUGREG 0x0c +#define MANTIS_DATINV (0x0e << 7) +#define MANTIS_TOP_DEBUGSEL (0x07 << 4) +#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0) + +#define MANTIS_RISC_START 0x10 +#define MANTIS_RISC_PC 0x14 + +/* I2C */ +#define MANTIS_I2CDATA_CTL 0x18 +#define MANTIS_I2C_RATE_1 (0x00 << 6) +#define MANTIS_I2C_RATE_2 (0x01 << 6) +#define MANTIS_I2C_RATE_3 (0x02 << 6) +#define MANTIS_I2C_RATE_4 (0x03 << 6) +#define MANTIS_I2C_STOP (0x01 << 5) +#define MANTIS_I2C_PGMODE (0x01 << 3) + +/* DATA */ +#define MANTIS_CMD_DATA_R1 0x20 +#define MANTIS_CMD_DATA_3 (0xff << 24) +#define MANTIS_CMD_DATA_2 (0xff << 16) +#define MANTIS_CMD_DATA_1 (0xff << 8) +#define MANTIS_CMD_DATA_0 (0xff << 0) + +#define MANTIS_CMD_DATA_R2 0x24 +#define MANTIS_CMD_DATA_7 (0xff << 24) +#define MANTIS_CMD_DATA_6 (0xff << 16) +#define MANTIS_CMD_DATA_5 (0xff << 8) +#define MANTIS_CMD_DATA_4 (0xff << 0) + +#define MANTIS_CONTROL 0x28 +#define MANTIS_DET (0x01 << 7) +#define MANTIS_DAT_CF_EN (0x01 << 6) +#define MANTIS_ACS (0x03 << 4) +#define MANTIS_VCCEN (0x01 << 3) +#define MANTIS_BYPASS (0x01 << 2) +#define MANTIS_MRST (0x01 << 1) +#define MANTIS_CRST_INT (0x01 << 0) + +#define MANTIS_GPIF_CFGSLA 0x84 +#define MANTIS_GPIF_WAITSMPL (0x07 << 28) +#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25) +#define MANTIS_GPIF_WAITPOL (0x01 << 24) +#define MANTIS_GPIF_NCDELAY (0x07 << 20) +#define MANTIS_GPIF_RW2CSDELAY (0x07 << 16) +#define MANTIS_GPIF_SLFTIMEDMODE (0x01 << 15) +#define MANTIS_GPIF_SLFTIMEDDELY (0x7f << 8) +#define MANTIS_GPIF_DEVTYPE (0x07 << 4) +#define MANTIS_GPIF_BIGENDIAN (0x01 << 3) +#define MANTIS_GPIF_FETCHCMD (0x03 << 1) +#define MANTIS_GPIF_HWORDDEV (0x01 << 0) + +#define MANTIS_GPIF_WSTOPER 0x90 +#define MANTIS_GPIF_WSTOPERWREN3 (0x01 << 31) +#define MANTIS_GPIF_PARBOOTN (0x01 << 29) +#define MANTIS_GPIF_WSTOPERSLID3 (0x1f << 24) +#define MANTIS_GPIF_WSTOPERWREN2 (0x01 << 23) +#define MANTIS_GPIF_WSTOPERSLID2 (0x1f << 16) +#define MANTIS_GPIF_WSTOPERWREN1 (0x01 << 15) +#define MANTIS_GPIF_WSTOPERSLID1 (0x1f << 8) +#define MANTIS_GPIF_WSTOPERWREN0 (0x01 << 7) +#define MANTIS_GPIF_WSTOPERSLID0 (0x1f << 0) + +#define MANTIS_GPIF_CS2RW 0x94 +#define MANTIS_GPIF_CS2RWWREN3 (0x01 << 31) +#define MANTIS_GPIF_CS2RWDELY3 (0x3f << 24) +#define MANTIS_GPIF_CS2RWWREN2 (0x01 << 23) +#define MANTIS_GPIF_CS2RWDELY2 (0x3f << 16) +#define MANTIS_GPIF_CS2RWWREN1 (0x01 << 15) +#define MANTIS_GPIF_CS2RWDELY1 (0x3f << 8) +#define MANTIS_GPIF_CS2RWWREN0 (0x01 << 7) +#define MANTIS_GPIF_CS2RWDELY0 (0x3f << 0) + +#define MANTIS_GPIF_IRQCFG 0x98 +#define MANTIS_GPIF_IRQPOL (0x01 << 8) +#define MANTIS_MASK_WRACK (0x01 << 7) +#define MANTIS_MASK_BRRDY (0x01 << 6) +#define MANTIS_MASK_OVFLW (0x01 << 5) +#define MANTIS_MASK_OTHERR (0x01 << 4) +#define MANTIS_MASK_WSTO (0x01 << 3) +#define MANTIS_MASK_EXTIRQ (0x01 << 2) +#define MANTIS_MASK_PLUGIN (0x01 << 1) +#define MANTIS_MASK_PLUGOUT (0x01 << 0) + +#define MANTIS_GPIF_STATUS 0x9c +#define MANTIS_SBUF_KILLOP (0x01 << 15) +#define MANTIS_SBUF_OPDONE (0x01 << 14) +#define MANTIS_SBUF_EMPTY (0x01 << 13) +#define MANTIS_GPIF_DETSTAT (0x01 << 9) +#define MANTIS_GPIF_INTSTAT (0x01 << 8) +#define MANTIS_GPIF_WRACK (0x01 << 7) +#define MANTIS_GPIF_BRRDY (0x01 << 6) +#define MANTIS_SBUF_OVFLW (0x01 << 5) +#define MANTIS_GPIF_OTHERR (0x01 << 4) +#define MANTIS_SBUF_WSTO (0x01 << 3) +#define MANTIS_GPIF_EXTIRQ (0x01 << 2) +#define MANTIS_CARD_PLUGIN (0x01 << 1) +#define MANTIS_CARD_PLUGOUT (0x01 << 0) + +#define MANTIS_GPIF_BRADDR 0xa0 +#define MANTIS_GPIF_PCMCIAREG (0x01 << 27) +#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) +#define MANTIS_GPIF_BR_ADDR (0xfffffff << 0) + +#define MANTIS_GPIF_BRBYTES 0xa4 +#define MANTIS_GPIF_BRCNT (0xfff << 0) + +#define MANTIS_PCMCIA_RESET 0xa8 +#define MANTIS_PCMCIA_RSTVAL (0xff << 0) + +#define MANTIS_CARD_RESET 0xac + +#define MANTIS_GPIF_ADDR 0xb0 +#define MANTIS_GPIF_HIFRDWRN (0x01 << 31) +#define MANTIS_GPIF_PCMCIAREG (0x01 << 27) +#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) +#define MANTIS_GPIF_HIFADDR (0xfffffff << 0) + +#define MANTIS_GPIF_DOUT 0xb4 +#define MANTIS_GPIF_HIFDOUT (0xfffffff << 0) + +#define MANTIS_GPIF_DIN 0xb8 +#define MANTIS_GPIF_HIFDIN (0xfffffff << 0) + +#define MANTIS_GPIF_SPARE 0xbc +#define MANTIS_GPIF_LOGICRD (0xffff << 16) +#define MANTIS_GPIF_LOGICRW (0xffff << 0) + +#endif /* __MANTIS_REG_H */ diff --git a/drivers/media/pci/mantis/mantis_uart.c b/drivers/media/pci/mantis/mantis_uart.c new file mode 100644 index 00000000..a7071921 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_uart.c @@ -0,0 +1,188 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_uart.h" + +struct mantis_uart_params { + enum mantis_baud baud_rate; + enum mantis_parity parity; +}; + +static struct { + char string[7]; +} rates[5] = { + { "9600" }, + { "19200" }, + { "38400" }, + { "57600" }, + { "115200" } +}; + +static struct { + char string[5]; +} parity[3] = { + { "NONE" }, + { "ODD" }, + { "EVEN" } +}; + +#define UART_MAX_BUF 16 + +static int mantis_uart_read(struct mantis_pci *mantis, u8 *data) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + u32 stat = 0, i; + + /* get data */ + for (i = 0; i < (config->bytes + 1); i++) { + + stat = mmread(MANTIS_UART_STAT); + + if (stat & MANTIS_UART_RXFIFO_FULL) { + dprintk(MANTIS_ERROR, 1, "RX Fifo FULL"); + } + data[i] = mmread(MANTIS_UART_RXD) & 0x3f; + + dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f); + + if (data[i] & (1 << 7)) { + dprintk(MANTIS_ERROR, 1, "UART framing error"); + return -EINVAL; + } + if (data[i] & (1 << 6)) { + dprintk(MANTIS_ERROR, 1, "UART parity error"); + return -EINVAL; + } + } + + return 0; +} + +static void mantis_uart_work(struct work_struct *work) +{ + struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work); + struct mantis_hwconfig *config = mantis->hwconfig; + u8 buf[16]; + int i; + + mantis_uart_read(mantis, buf); + + for (i = 0; i < (config->bytes + 1); i++) + dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]); + + dprintk(MANTIS_DEBUG, 0, "\n"); +} + +static int mantis_uart_setup(struct mantis_pci *mantis, + struct mantis_uart_params *params) +{ + u32 reg; + + mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL); + + reg = mmread(MANTIS_UART_BAUD); + + switch (params->baud_rate) { + case MANTIS_BAUD_9600: + reg |= 0xd8; + break; + case MANTIS_BAUD_19200: + reg |= 0x6c; + break; + case MANTIS_BAUD_38400: + reg |= 0x36; + break; + case MANTIS_BAUD_57600: + reg |= 0x23; + break; + case MANTIS_BAUD_115200: + reg |= 0x11; + break; + default: + return -EINVAL; + } + + mmwrite(reg, MANTIS_UART_BAUD); + + return 0; +} + +int mantis_uart_init(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + struct mantis_uart_params params; + + /* default parity: */ + params.baud_rate = config->baud_rate; + params.parity = config->parity; + dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s", + rates[params.baud_rate].string, + parity[params.parity].string); + + init_waitqueue_head(&mantis->uart_wq); + spin_lock_init(&mantis->uart_lock); + + INIT_WORK(&mantis->uart_work, mantis_uart_work); + + /* disable interrupt */ + mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); + + mantis_uart_setup(mantis, ¶ms); + + /* default 1 byte */ + mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD); + + /* flush buffer */ + mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL); + + /* enable interrupt */ + mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK); + mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL); + + schedule_work(&mantis->uart_work); + dprintk(MANTIS_DEBUG, 1, "UART successfully initialized"); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_uart_init); + +void mantis_uart_exit(struct mantis_pci *mantis) +{ + /* disable interrupt */ + mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); + flush_work(&mantis->uart_work); +} +EXPORT_SYMBOL_GPL(mantis_uart_exit); diff --git a/drivers/media/pci/mantis/mantis_uart.h b/drivers/media/pci/mantis/mantis_uart.h new file mode 100644 index 00000000..ffb62a0a --- /dev/null +++ b/drivers/media/pci/mantis/mantis_uart.h @@ -0,0 +1,58 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_UART_H +#define __MANTIS_UART_H + +#define MANTIS_UART_CTL 0xe0 +#define MANTIS_UART_RXINT (1 << 4) +#define MANTIS_UART_RXFLUSH (1 << 2) + +#define MANTIS_UART_RXD 0xe8 +#define MANTIS_UART_BAUD 0xec + +#define MANTIS_UART_STAT 0xf0 +#define MANTIS_UART_RXFIFO_DATA (1 << 7) +#define MANTIS_UART_RXFIFO_EMPTY (1 << 6) +#define MANTIS_UART_RXFIFO_FULL (1 << 3) +#define MANTIS_UART_FRAME_ERR (1 << 2) +#define MANTIS_UART_PARITY_ERR (1 << 1) +#define MANTIS_UART_RXTHRESH_INT (1 << 0) + +enum mantis_baud { + MANTIS_BAUD_9600 = 0, + MANTIS_BAUD_19200, + MANTIS_BAUD_38400, + MANTIS_BAUD_57600, + MANTIS_BAUD_115200 +}; + +enum mantis_parity { + MANTIS_PARITY_NONE = 0, + MANTIS_PARITY_EVEN, + MANTIS_PARITY_ODD, +}; + +struct mantis_pci; + +extern int mantis_uart_init(struct mantis_pci *mantis); +extern void mantis_uart_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_UART_H */ diff --git a/drivers/media/pci/mantis/mantis_vp1033.c b/drivers/media/pci/mantis/mantis_vp1033.c new file mode 100644 index 00000000..115003e8 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp1033.c @@ -0,0 +1,212 @@ +/* + Mantis VP-1033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "stv0299.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1033.h" +#include "mantis_reg.h" + +u8 lgtdqcs001f_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x2a, + 0x05, 0x85, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x00, + 0x0c, 0x01, + 0x0d, 0x81, + 0x0e, 0x44, + 0x0f, 0x94, + 0x10, 0x3c, + 0x11, 0x84, + 0x12, 0xb9, + 0x13, 0xb5, + 0x14, 0x4f, + 0x15, 0xc9, + 0x16, 0x80, + 0x17, 0x36, + 0x18, 0xfb, + 0x19, 0xcf, + 0x1a, 0xbc, + 0x1c, 0x2b, + 0x1d, 0x27, + 0x1e, 0x00, + 0x1f, 0x0b, + 0x20, 0xa1, + 0x21, 0x60, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x05, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x13, + 0xff, 0xff, +}; + +#define MANTIS_MODEL_NAME "VP-1033" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +static int lgtdqcs001f_tuner_set(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[4]; + u32 div; + + + struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)}; + + div = p->frequency / 250; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x83; + buf[3] = 0xc0; + + if (p->frequency < 1531000) + buf[3] |= 0x04; + else + buf[3] &= ~0x04; + if (i2c_transfer(adapter, &msg, 1) < 0) { + dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed"); + return -EIO; + } + msleep_interruptible(100); + + return 0; +} + +static int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); + + return 0; +} + +struct stv0299_config lgtdqcs001f_config = { + .demod_address = 0x68, + .inittab = lgtdqcs001f_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = lgtdqcs001f_set_symbol_rate, +}; + +static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); + fe = dvb_attach(stv0299_attach, &lgtdqcs001f_config, adapter); + + if (fe) { + fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; + dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", + lgtdqcs001f_config.demod_address); + + dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/pci/mantis/mantis_vp1033.h b/drivers/media/pci/mantis/mantis_vp1033.h new file mode 100644 index 00000000..7daaa1bf --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp1033.h @@ -0,0 +1,30 @@ +/* + Mantis VP-1033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1033_H +#define __MANTIS_VP1033_H + +#include "mantis_common.h" + +#define MANTIS_VP_1033_DVB_S 0x0016 + +extern struct mantis_hwconfig vp1033_config; + +#endif /* __MANTIS_VP1033_H */ diff --git a/drivers/media/pci/mantis/mantis_vp1034.c b/drivers/media/pci/mantis/mantis_vp1034.c new file mode 100644 index 00000000..430ae84c --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp1034.c @@ -0,0 +1,120 @@ +/* + Mantis VP-1034 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mb86a16.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1034.h" +#include "mantis_reg.h" + +struct mb86a16_config vp1034_mb86a16_config = { + .demod_address = 0x08, + .set_voltage = vp1034_set_voltage, +}; + +#define MANTIS_MODEL_NAME "VP-1034" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct mantis_pci *mantis = fe->dvb->priv; + + switch (voltage) { + case SEC_VOLTAGE_13: + dprintk(MANTIS_ERROR, 1, "Polarization=[13V]"); + mantis_gpio_set_bits(mantis, 13, 1); + mantis_gpio_set_bits(mantis, 14, 0); + break; + case SEC_VOLTAGE_18: + dprintk(MANTIS_ERROR, 1, "Polarization=[18V]"); + mantis_gpio_set_bits(mantis, 13, 1); + mantis_gpio_set_bits(mantis, 14, 1); + break; + case SEC_VOLTAGE_OFF: + dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); + break; + default: + dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage); + return -EINVAL; + } + mmwrite(0x00, MANTIS_GPIF_DOUT); + + return 0; +} + +static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); + fe = dvb_attach(mb86a16_attach, &vp1034_mb86a16_config, adapter); + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found MB86A16 DVB-S/DSS frontend @0x%02x", + vp1034_mb86a16_config.demod_address); + + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1034_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1034_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/pci/mantis/mantis_vp1034.h b/drivers/media/pci/mantis/mantis_vp1034.h new file mode 100644 index 00000000..323f38ef --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp1034.h @@ -0,0 +1,33 @@ +/* + Mantis VP-1034 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1034_H +#define __MANTIS_VP1034_H + +#include "dvb_frontend.h" +#include "mantis_common.h" + + +#define MANTIS_VP_1034_DVB_S 0x0014 + +extern struct mantis_hwconfig vp1034_config; +extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage); + +#endif /* __MANTIS_VP1034_H */ diff --git a/drivers/media/pci/mantis/mantis_vp1041.c b/drivers/media/pci/mantis/mantis_vp1041.c new file mode 100644 index 00000000..07aa887a --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp1041.c @@ -0,0 +1,357 @@ +/* + Mantis VP-1041 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1041.h" +#include "stb0899_reg.h" +#include "stb0899_drv.h" +#include "stb0899_cfg.h" +#include "stb6100_cfg.h" +#include "stb6100.h" +#include "lnbp21.h" + +#define MANTIS_MODEL_NAME "VP-1041" +#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2" + +static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { + + /* 0x0000000b, *//* SYSREG */ + { STB0899_DEV_ID , 0x30 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x99 }, + { STB0899_DISF22RX , 0xa8 }, + /* SYSREG ? */ + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0xfe }, + { STB0899_IRQSTATUS_2 , 0x03 }, + { STB0899_IRQSTATUS_1 , 0x7c }, + { STB0899_IRQSTATUS_0 , 0xf4 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x58 }, + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x33 }, + { STB0899_IOPVALUE3 , 0x6d }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x60 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x01 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x01 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x23 }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xf7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xf1 }, + { STB0899_LDT2 , 0xe3 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfd }, + { STB0899_QDCCOMP , 0xff }, + { STB0899_POWERI , 0x0c }, + { STB0899_POWERQ , 0x0f }, + { STB0899_RCOMP , 0x6c }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x06 }, + { STB0899_AGC2I2 , 0x00 }, + { STB0899_TLIR , 0x30 }, + { STB0899_RTF , 0x7f }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xbc }, + { STB0899_CFRM , 0xea }, + { STB0899_CFRL , 0x31 }, + { STB0899_NIRM , 0x2b }, + { STB0899_NIRL , 0x80 }, + { STB0899_ISYMB , 0x1d }, + { STB0899_QSYMB , 0xa6 }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0x02 }, + { STB0899_EQUAQ1 , 0xff }, + { STB0899_EQUAI2 , 0x04 }, + { STB0899_EQUAQ2 , 0x05 }, + { STB0899_EQUAI3 , 0x02 }, + { STB0899_EQUAQ3 , 0xfd }, + { STB0899_EQUAI4 , 0x03 }, + { STB0899_EQUAQ4 , 0x07 }, + { STB0899_EQUAI5 , 0x08 }, + { STB0899_EQUAQ5 , 0xf5 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0x86 }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x0a }, + { STB0899_ECNT3L , 0xad }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xb0 }, + { STB0899_VTH23 , 0x7a }, + { STB0899_VTH34 , 0x58 }, + { STB0899_VTH56 , 0x38 }, + { STB0899_VTH67 , 0x34 }, + { STB0899_VTH78 , 0x24 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x41 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x00 }, + { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x1b }, + { STB0899_TSLLSTKL , 0xb3 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0x00 }, + { STB0899_PCKLENUL , 0xbc }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xbd }, + { STB0899_TSSTATUS , 0x90 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x95 }, + { STB0899_ERRCTRL3 , 0x8d }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x19 }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0xf0 }, + { STB0899_MATSTRL , 0x02 }, + { STB0899_UPLSTRM , 0x45 }, + { STB0899_UPLSTRL , 0x60 }, + { STB0899_DFLSTRM , 0xe3 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x47 }, + { STB0899_SYNCDSTRM , 0x05 }, + { STB0899_SYNCDSTRL , 0x18 }, + { STB0899_CFGPDELSTATUS1 , 0x19 }, + { STB0899_CFGPDELSTATUS2 , 0x2b }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x01 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +struct stb0899_config vp1041_stb0899_config = { + .init_dev = vp1041_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = vp1041_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .demod_address = 0x68, /* 0xd0 >> 1 */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL, +}; + +struct stb6100_config vp1041_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + mantis->fe = dvb_attach(stb0899_attach, &vp1041_stb0899_config, adapter); + if (mantis->fe) { + dprintk(MANTIS_ERROR, 1, + "found STB0899 DVB-S/DVB-S2 frontend @0x%02x", + vp1041_stb0899_config.demod_address); + + if (dvb_attach(stb6100_attach, mantis->fe, &vp1041_stb6100_config, adapter)) { + if (!dvb_attach(lnbp21_attach, mantis->fe, adapter, 0, 0)) + dprintk(MANTIS_ERROR, 1, "No LNBP21 found!"); + } + } else { + return -EREMOTEIO; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + + + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1041_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1041_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/pci/mantis/mantis_vp1041.h b/drivers/media/pci/mantis/mantis_vp1041.h new file mode 100644 index 00000000..1ae5b3de --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp1041.h @@ -0,0 +1,33 @@ +/* + Mantis VP-1041 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1041_H +#define __MANTIS_VP1041_H + +#include "mantis_common.h" + +#define MANTIS_VP_1041_DVB_S2 0x0031 +#define SKYSTAR_HD2_10 0x0001 +#define SKYSTAR_HD2_20 0x0003 +#define CINERGY_S2_PCI_HD 0x1179 + +extern struct mantis_hwconfig vp1041_config; + +#endif /* __MANTIS_VP1041_H */ diff --git a/drivers/media/pci/mantis/mantis_vp2033.c b/drivers/media/pci/mantis/mantis_vp2033.c new file mode 100644 index 00000000..1ca6837f --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp2033.c @@ -0,0 +1,188 @@ +/* + Mantis VP-2033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "tda1002x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp2033.h" + +#define MANTIS_MODEL_NAME "VP-2033" +#define MANTIS_DEV_TYPE "DVB-C" + +struct tda1002x_config vp2033_tda1002x_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +struct tda10023_config vp2033_tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +static u8 read_pwm(struct mantis_pci *mantis) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { + {.addr = 0x50, .flags = 0, .buf = &b, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} + }; + + if ((i2c_transfer(adapter, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)}; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (p->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (p->frequency < 150000000 ? 0x01 : + p->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = dvb_attach(tda10021_attach, &vp2033_tda1002x_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } else { + fe = dvb_attach(tda10023_attach, &vp2033_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + + mantis->fe = fe; + dprintk(MANTIS_DEBUG, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp2033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp2033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/pci/mantis/mantis_vp2033.h b/drivers/media/pci/mantis/mantis_vp2033.h new file mode 100644 index 00000000..c55242b7 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp2033.h @@ -0,0 +1,30 @@ +/* + Mantis VP-2033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP2033_H +#define __MANTIS_VP2033_H + +#include "mantis_common.h" + +#define MANTIS_VP_2033_DVB_C 0x0008 + +extern struct mantis_hwconfig vp2033_config; + +#endif /* __MANTIS_VP2033_H */ diff --git a/drivers/media/pci/mantis/mantis_vp2040.c b/drivers/media/pci/mantis/mantis_vp2040.c new file mode 100644 index 00000000..d480741a --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp2040.c @@ -0,0 +1,187 @@ +/* + Mantis VP-2040 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "tda1002x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp2040.h" + +#define MANTIS_MODEL_NAME "VP-2040" +#define MANTIS_DEV_TYPE "DVB-C" + +struct tda1002x_config vp2040_tda1002x_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +struct tda10023_config vp2040_tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)}; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (p->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (p->frequency < 150000000 ? 0x01 : + p->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static u8 read_pwm(struct mantis_pci *mantis) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { + {.addr = 0x50, .flags = 0, .buf = &b, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} + }; + + if ((i2c_transfer(adapter, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = dvb_attach(tda10021_attach, &vp2040_tda1002x_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } else { + fe = dvb_attach(tda10023_attach, &vp2040_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_DEBUG, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp2040_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp2040_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/pci/mantis/mantis_vp2040.h b/drivers/media/pci/mantis/mantis_vp2040.h new file mode 100644 index 00000000..d125e219 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp2040.h @@ -0,0 +1,32 @@ +/* + Mantis VP-2040 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP2040_H +#define __MANTIS_VP2040_H + +#include "mantis_common.h" + +#define MANTIS_VP_2040_DVB_C 0x0043 +#define CINERGY_C 0x1178 +#define CABLESTAR_HD2 0x0002 + +extern struct mantis_hwconfig vp2040_config; + +#endif /* __MANTIS_VP2040_H */ diff --git a/drivers/media/pci/mantis/mantis_vp3028.c b/drivers/media/pci/mantis/mantis_vp3028.c new file mode 100644 index 00000000..4155c838 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp3028.c @@ -0,0 +1,38 @@ +/* + Mantis VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp3028.h" + +struct zl10353_config mantis_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +struct mantis_hwconfig vp3028_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, +}; diff --git a/drivers/media/pci/mantis/mantis_vp3028.h b/drivers/media/pci/mantis/mantis_vp3028.h new file mode 100644 index 00000000..b07be6ad --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp3028.h @@ -0,0 +1,33 @@ +/* + Mantis VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "dvb_frontend.h" +#include "mantis_common.h" +#include "zl10353.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct zl10353_config mantis_vp3028_config; +extern struct mantis_hwconfig vp3028_mantis_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/pci/mantis/mantis_vp3030.c b/drivers/media/pci/mantis/mantis_vp3030.c new file mode 100644 index 00000000..c09308cd --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp3030.c @@ -0,0 +1,105 @@ +/* + Mantis VP-3030 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" +#include "tda665x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp3030.h" + +struct zl10353_config mantis_vp3030_config = { + .demod_address = 0x0f, +}; + +struct tda665x_config env57h12d5_config = { + .name = "ENV57H12D5 (ET-50DT)", + .addr = 0x60, + .frequency_min = 47000000, + .frequency_max = 862000000, + .frequency_offst = 3616667, + .ref_multiplier = 6, /* 1/6 MHz */ + .ref_divider = 100000, /* 1/6 MHz */ +}; + +#define MANTIS_MODEL_NAME "VP-3030" +#define MANTIS_DEV_TYPE "DVB-T" + + +static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; + int err = 0; + + mantis_gpio_set_bits(mantis, config->reset, 0); + msleep(100); + err = mantis_frontend_power(mantis, POWER_ON); + msleep(100); + mantis_gpio_set_bits(mantis, config->reset, 1); + + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = dvb_attach(zl10353_attach, &mantis_vp3030_config, adapter); + + if (!fe) + return -1; + + dvb_attach(tda665x_attach, fe, &env57h12d5_config, adapter); + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3030_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3030_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, + + .i2c_mode = MANTIS_BYTE_MODE +}; diff --git a/drivers/media/pci/mantis/mantis_vp3030.h b/drivers/media/pci/mantis/mantis_vp3030.h new file mode 100644 index 00000000..5f12c426 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_vp3030.h @@ -0,0 +1,30 @@ +/* + Mantis VP-3030 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3030_H +#define __MANTIS_VP3030_H + +#include "mantis_common.h" + +#define MANTIS_VP_3030_DVB_T 0x0024 + +extern struct mantis_hwconfig vp3030_config; + +#endif /* __MANTIS_VP3030_H */ diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig new file mode 100644 index 00000000..b4bf848b --- /dev/null +++ b/drivers/media/pci/meye/Kconfig @@ -0,0 +1,13 @@ +config VIDEO_MEYE + tristate "Sony Vaio Picturebook Motion Eye Video For Linux" + depends on PCI && SONY_LAPTOP && VIDEO_V4L2 + ---help--- + This is the video4linux driver for the Motion Eye camera found + in the Vaio Picturebook laptops. Please read the material in + for more information. + + If you say Y or M here, you need to say Y or M to "Sony Laptop + Extras" in the misc device section. + + To compile this driver as a module, choose M here: the + module will be called meye. diff --git a/drivers/media/pci/meye/Makefile b/drivers/media/pci/meye/Makefile new file mode 100644 index 00000000..49388518 --- /dev/null +++ b/drivers/media/pci/meye/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_VIDEO_MEYE) += meye.o diff --git a/drivers/media/pci/meye/meye.c b/drivers/media/pci/meye/meye.c new file mode 100644 index 00000000..2381b054 --- /dev/null +++ b/drivers/media/pci/meye/meye.c @@ -0,0 +1,1863 @@ +/* + * Motion Eye video4linux driver for Sony Vaio PictureBook + * + * Copyright (C) 2001-2004 Stelian Pop + * + * Copyright (C) 2001-2002 Alcôve + * + * Copyright (C) 2000 Andrew Tridgell + * + * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras. + * + * Some parts borrowed from various video4linux drivers, especially + * bttv-driver.c and zoran.c, see original files for credits. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "meye.h" +#include + +MODULE_AUTHOR("Stelian Pop "); +MODULE_DESCRIPTION("v4l2 driver for the MotionEye camera"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(MEYE_DRIVER_VERSION); + +/* number of grab buffers */ +static unsigned int gbuffers = 2; +module_param(gbuffers, int, 0444); +MODULE_PARM_DESC(gbuffers, "number of capture buffers, default is 2 (32 max)"); + +/* size of a grab buffer */ +static unsigned int gbufsize = MEYE_MAX_BUFSIZE; +module_param(gbufsize, int, 0444); +MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 614400" + " (will be rounded up to a page multiple)"); + +/* /dev/videoX registration number */ +static int video_nr = -1; +module_param(video_nr, int, 0444); +MODULE_PARM_DESC(video_nr, "video device to register (0=/dev/video0, etc)"); + +/* driver structure - only one possible */ +static struct meye meye; + +/****************************************************************************/ +/* Memory allocation routines (stolen from bttv-driver.c) */ +/****************************************************************************/ +static void *rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (mem) { + memset(mem, 0, size); + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + } + return mem; +} + +static void rvfree(void * mem, unsigned long size) +{ + unsigned long adr; + + if (mem) { + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); + } +} + +/* + * return a page table pointing to N pages of locked memory + * + * NOTE: The meye device expects DMA addresses on 32 bits, we build + * a table of 1024 entries = 4 bytes * 1024 = 4096 bytes. + */ +static int ptable_alloc(void) +{ + u32 *pt; + int i; + + memset(meye.mchip_ptable, 0, sizeof(meye.mchip_ptable)); + + /* give only 32 bit DMA addresses */ + if (dma_set_mask(&meye.mchip_dev->dev, DMA_BIT_MASK(32))) + return -1; + + meye.mchip_ptable_toc = dma_alloc_coherent(&meye.mchip_dev->dev, + PAGE_SIZE, + &meye.mchip_dmahandle, + GFP_KERNEL); + if (!meye.mchip_ptable_toc) { + meye.mchip_dmahandle = 0; + return -1; + } + + pt = meye.mchip_ptable_toc; + for (i = 0; i < MCHIP_NB_PAGES; i++) { + dma_addr_t dma; + meye.mchip_ptable[i] = dma_alloc_coherent(&meye.mchip_dev->dev, + PAGE_SIZE, + &dma, + GFP_KERNEL); + if (!meye.mchip_ptable[i]) { + int j; + pt = meye.mchip_ptable_toc; + for (j = 0; j < i; ++j) { + dma = (dma_addr_t) *pt; + dma_free_coherent(&meye.mchip_dev->dev, + PAGE_SIZE, + meye.mchip_ptable[j], dma); + pt++; + } + dma_free_coherent(&meye.mchip_dev->dev, + PAGE_SIZE, + meye.mchip_ptable_toc, + meye.mchip_dmahandle); + meye.mchip_ptable_toc = NULL; + meye.mchip_dmahandle = 0; + return -1; + } + *pt = (u32) dma; + pt++; + } + return 0; +} + +static void ptable_free(void) +{ + u32 *pt; + int i; + + pt = meye.mchip_ptable_toc; + for (i = 0; i < MCHIP_NB_PAGES; i++) { + dma_addr_t dma = (dma_addr_t) *pt; + if (meye.mchip_ptable[i]) + dma_free_coherent(&meye.mchip_dev->dev, + PAGE_SIZE, + meye.mchip_ptable[i], dma); + pt++; + } + + if (meye.mchip_ptable_toc) + dma_free_coherent(&meye.mchip_dev->dev, + PAGE_SIZE, + meye.mchip_ptable_toc, + meye.mchip_dmahandle); + + memset(meye.mchip_ptable, 0, sizeof(meye.mchip_ptable)); + meye.mchip_ptable_toc = NULL; + meye.mchip_dmahandle = 0; +} + +/* copy data from ptable into buf */ +static void ptable_copy(u8 *buf, int start, int size, int pt_pages) +{ + int i; + + for (i = 0; i < (size / PAGE_SIZE) * PAGE_SIZE; i += PAGE_SIZE) { + memcpy(buf + i, meye.mchip_ptable[start++], PAGE_SIZE); + if (start >= pt_pages) + start = 0; + } + memcpy(buf + i, meye.mchip_ptable[start], size % PAGE_SIZE); +} + +/****************************************************************************/ +/* JPEG tables at different qualities to load into the VRJ chip */ +/****************************************************************************/ + +/* return a set of quantisation tables based on a quality from 1 to 10 */ +static u16 *jpeg_quantisation_tables(int *length, int quality) +{ + static u16 jpeg_tables[][70] = { { + 0xdbff, 0x4300, 0xff00, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, + 0xdbff, 0x4300, 0xff01, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, + }, + { + 0xdbff, 0x4300, 0x5000, 0x3c37, 0x3c46, 0x5032, 0x4146, 0x5a46, + 0x5055, 0x785f, 0x82c8, 0x6e78, 0x786e, 0xaff5, 0x91b9, 0xffc8, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, + 0xdbff, 0x4300, 0x5501, 0x5a5a, 0x6978, 0xeb78, 0x8282, 0xffeb, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, + }, + { + 0xdbff, 0x4300, 0x2800, 0x1e1c, 0x1e23, 0x2819, 0x2123, 0x2d23, + 0x282b, 0x3c30, 0x4164, 0x373c, 0x3c37, 0x587b, 0x495d, 0x9164, + 0x9980, 0x8f96, 0x8c80, 0xa08a, 0xe6b4, 0xa0c3, 0xdaaa, 0x8aad, + 0xc88c, 0xcbff, 0xeeda, 0xfff5, 0xffff, 0xc19b, 0xffff, 0xfaff, + 0xe6ff, 0xfffd, 0xfff8, + 0xdbff, 0x4300, 0x2b01, 0x2d2d, 0x353c, 0x763c, 0x4141, 0xf876, + 0x8ca5, 0xf8a5, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, + 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, + 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, + 0xf8f8, 0xf8f8, 0xfff8, + }, + { + 0xdbff, 0x4300, 0x1b00, 0x1412, 0x1417, 0x1b11, 0x1617, 0x1e17, + 0x1b1c, 0x2820, 0x2b42, 0x2528, 0x2825, 0x3a51, 0x303d, 0x6042, + 0x6555, 0x5f64, 0x5d55, 0x6a5b, 0x9978, 0x6a81, 0x9071, 0x5b73, + 0x855d, 0x86b5, 0x9e90, 0xaba3, 0xabad, 0x8067, 0xc9bc, 0xa6ba, + 0x99c7, 0xaba8, 0xffa4, + 0xdbff, 0x4300, 0x1c01, 0x1e1e, 0x2328, 0x4e28, 0x2b2b, 0xa44e, + 0x5d6e, 0xa46e, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, + 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, + 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, + 0xa4a4, 0xa4a4, 0xffa4, + }, + { + 0xdbff, 0x4300, 0x1400, 0x0f0e, 0x0f12, 0x140d, 0x1012, 0x1712, + 0x1415, 0x1e18, 0x2132, 0x1c1e, 0x1e1c, 0x2c3d, 0x242e, 0x4932, + 0x4c40, 0x474b, 0x4640, 0x5045, 0x735a, 0x5062, 0x6d55, 0x4556, + 0x6446, 0x6588, 0x776d, 0x817b, 0x8182, 0x604e, 0x978d, 0x7d8c, + 0x7396, 0x817e, 0xff7c, + 0xdbff, 0x4300, 0x1501, 0x1717, 0x1a1e, 0x3b1e, 0x2121, 0x7c3b, + 0x4653, 0x7c53, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, + 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, + 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, + 0x7c7c, 0x7c7c, 0xff7c, + }, + { + 0xdbff, 0x4300, 0x1000, 0x0c0b, 0x0c0e, 0x100a, 0x0d0e, 0x120e, + 0x1011, 0x1813, 0x1a28, 0x1618, 0x1816, 0x2331, 0x1d25, 0x3a28, + 0x3d33, 0x393c, 0x3833, 0x4037, 0x5c48, 0x404e, 0x5744, 0x3745, + 0x5038, 0x516d, 0x5f57, 0x6762, 0x6768, 0x4d3e, 0x7971, 0x6470, + 0x5c78, 0x6765, 0xff63, + 0xdbff, 0x4300, 0x1101, 0x1212, 0x1518, 0x2f18, 0x1a1a, 0x632f, + 0x3842, 0x6342, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, + 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, + 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, + 0x6363, 0x6363, 0xff63, + }, + { + 0xdbff, 0x4300, 0x0d00, 0x0a09, 0x0a0b, 0x0d08, 0x0a0b, 0x0e0b, + 0x0d0e, 0x130f, 0x1520, 0x1213, 0x1312, 0x1c27, 0x171e, 0x2e20, + 0x3129, 0x2e30, 0x2d29, 0x332c, 0x4a3a, 0x333e, 0x4636, 0x2c37, + 0x402d, 0x4157, 0x4c46, 0x524e, 0x5253, 0x3e32, 0x615a, 0x505a, + 0x4a60, 0x5251, 0xff4f, + 0xdbff, 0x4300, 0x0e01, 0x0e0e, 0x1113, 0x2613, 0x1515, 0x4f26, + 0x2d35, 0x4f35, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, + 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, + 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, + 0x4f4f, 0x4f4f, 0xff4f, + }, + { + 0xdbff, 0x4300, 0x0a00, 0x0707, 0x0708, 0x0a06, 0x0808, 0x0b08, + 0x0a0a, 0x0e0b, 0x1018, 0x0d0e, 0x0e0d, 0x151d, 0x1116, 0x2318, + 0x251f, 0x2224, 0x221f, 0x2621, 0x372b, 0x262f, 0x3429, 0x2129, + 0x3022, 0x3141, 0x3934, 0x3e3b, 0x3e3e, 0x2e25, 0x4944, 0x3c43, + 0x3748, 0x3e3d, 0xff3b, + 0xdbff, 0x4300, 0x0a01, 0x0b0b, 0x0d0e, 0x1c0e, 0x1010, 0x3b1c, + 0x2228, 0x3b28, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, + 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, + 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, + 0x3b3b, 0x3b3b, 0xff3b, + }, + { + 0xdbff, 0x4300, 0x0600, 0x0504, 0x0506, 0x0604, 0x0506, 0x0706, + 0x0607, 0x0a08, 0x0a10, 0x090a, 0x0a09, 0x0e14, 0x0c0f, 0x1710, + 0x1814, 0x1718, 0x1614, 0x1a16, 0x251d, 0x1a1f, 0x231b, 0x161c, + 0x2016, 0x202c, 0x2623, 0x2927, 0x292a, 0x1f19, 0x302d, 0x282d, + 0x2530, 0x2928, 0xff28, + 0xdbff, 0x4300, 0x0701, 0x0707, 0x080a, 0x130a, 0x0a0a, 0x2813, + 0x161a, 0x281a, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, + 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, + 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, + 0x2828, 0x2828, 0xff28, + }, + { + 0xdbff, 0x4300, 0x0300, 0x0202, 0x0203, 0x0302, 0x0303, 0x0403, + 0x0303, 0x0504, 0x0508, 0x0405, 0x0504, 0x070a, 0x0607, 0x0c08, + 0x0c0a, 0x0b0c, 0x0b0a, 0x0d0b, 0x120e, 0x0d10, 0x110e, 0x0b0e, + 0x100b, 0x1016, 0x1311, 0x1514, 0x1515, 0x0f0c, 0x1817, 0x1416, + 0x1218, 0x1514, 0xff14, + 0xdbff, 0x4300, 0x0301, 0x0404, 0x0405, 0x0905, 0x0505, 0x1409, + 0x0b0d, 0x140d, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, + 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, + 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, + 0x1414, 0x1414, 0xff14, + }, + { + 0xdbff, 0x4300, 0x0100, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0101, 0x0101, 0xff01, + 0xdbff, 0x4300, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0101, 0x0101, 0xff01, + } }; + + if (quality < 0 || quality > 10) { + printk(KERN_WARNING + "meye: invalid quality level %d - using 8\n", quality); + quality = 8; + } + + *length = ARRAY_SIZE(jpeg_tables[quality]); + return jpeg_tables[quality]; +} + +/* return a generic set of huffman tables */ +static u16 *jpeg_huffman_tables(int *length) +{ + static u16 tables[] = { + 0xC4FF, 0xB500, 0x0010, 0x0102, 0x0303, 0x0402, 0x0503, 0x0405, + 0x0004, 0x0100, 0x017D, 0x0302, 0x0400, 0x0511, 0x2112, 0x4131, + 0x1306, 0x6151, 0x2207, 0x1471, 0x8132, 0xA191, 0x2308, 0xB142, + 0x15C1, 0xD152, 0x24F0, 0x6233, 0x8272, 0x0A09, 0x1716, 0x1918, + 0x251A, 0x2726, 0x2928, 0x342A, 0x3635, 0x3837, 0x3A39, 0x4443, + 0x4645, 0x4847, 0x4A49, 0x5453, 0x5655, 0x5857, 0x5A59, 0x6463, + 0x6665, 0x6867, 0x6A69, 0x7473, 0x7675, 0x7877, 0x7A79, 0x8483, + 0x8685, 0x8887, 0x8A89, 0x9392, 0x9594, 0x9796, 0x9998, 0xA29A, + 0xA4A3, 0xA6A5, 0xA8A7, 0xAAA9, 0xB3B2, 0xB5B4, 0xB7B6, 0xB9B8, + 0xC2BA, 0xC4C3, 0xC6C5, 0xC8C7, 0xCAC9, 0xD3D2, 0xD5D4, 0xD7D6, + 0xD9D8, 0xE1DA, 0xE3E2, 0xE5E4, 0xE7E6, 0xE9E8, 0xF1EA, 0xF3F2, + 0xF5F4, 0xF7F6, 0xF9F8, 0xFFFA, + 0xC4FF, 0xB500, 0x0011, 0x0102, 0x0402, 0x0304, 0x0704, 0x0405, + 0x0004, 0x0201, 0x0077, 0x0201, 0x1103, 0x0504, 0x3121, 0x1206, + 0x5141, 0x6107, 0x1371, 0x3222, 0x0881, 0x4214, 0xA191, 0xC1B1, + 0x2309, 0x5233, 0x15F0, 0x7262, 0x0AD1, 0x2416, 0xE134, 0xF125, + 0x1817, 0x1A19, 0x2726, 0x2928, 0x352A, 0x3736, 0x3938, 0x433A, + 0x4544, 0x4746, 0x4948, 0x534A, 0x5554, 0x5756, 0x5958, 0x635A, + 0x6564, 0x6766, 0x6968, 0x736A, 0x7574, 0x7776, 0x7978, 0x827A, + 0x8483, 0x8685, 0x8887, 0x8A89, 0x9392, 0x9594, 0x9796, 0x9998, + 0xA29A, 0xA4A3, 0xA6A5, 0xA8A7, 0xAAA9, 0xB3B2, 0xB5B4, 0xB7B6, + 0xB9B8, 0xC2BA, 0xC4C3, 0xC6C5, 0xC8C7, 0xCAC9, 0xD3D2, 0xD5D4, + 0xD7D6, 0xD9D8, 0xE2DA, 0xE4E3, 0xE6E5, 0xE8E7, 0xEAE9, 0xF3F2, + 0xF5F4, 0xF7F6, 0xF9F8, 0xFFFA, + 0xC4FF, 0x1F00, 0x0000, 0x0501, 0x0101, 0x0101, 0x0101, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0201, 0x0403, 0x0605, 0x0807, 0x0A09, + 0xFF0B, + 0xC4FF, 0x1F00, 0x0001, 0x0103, 0x0101, 0x0101, 0x0101, 0x0101, + 0x0000, 0x0000, 0x0000, 0x0201, 0x0403, 0x0605, 0x0807, 0x0A09, + 0xFF0B + }; + + *length = ARRAY_SIZE(tables); + return tables; +} + +/****************************************************************************/ +/* MCHIP low-level functions */ +/****************************************************************************/ + +/* returns the horizontal capture size */ +static inline int mchip_hsize(void) +{ + return meye.params.subsample ? 320 : 640; +} + +/* returns the vertical capture size */ +static inline int mchip_vsize(void) +{ + return meye.params.subsample ? 240 : 480; +} + +/* waits for a register to be available */ +static void mchip_sync(int reg) +{ + u32 status; + int i; + + if (reg == MCHIP_MM_FIFO_DATA) { + for (i = 0; i < MCHIP_REG_TIMEOUT; i++) { + status = readl(meye.mchip_mmregs + + MCHIP_MM_FIFO_STATUS); + if (!(status & MCHIP_MM_FIFO_WAIT)) { + printk(KERN_WARNING "meye: fifo not ready\n"); + return; + } + if (status & MCHIP_MM_FIFO_READY) + return; + udelay(1); + } + } else if (reg > 0x80) { + u32 mask = (reg < 0x100) ? MCHIP_HIC_STATUS_MCC_RDY + : MCHIP_HIC_STATUS_VRJ_RDY; + for (i = 0; i < MCHIP_REG_TIMEOUT; i++) { + status = readl(meye.mchip_mmregs + MCHIP_HIC_STATUS); + if (status & mask) + return; + udelay(1); + } + } else + return; + printk(KERN_WARNING + "meye: mchip_sync() timeout on reg 0x%x status=0x%x\n", + reg, status); +} + +/* sets a value into the register */ +static inline void mchip_set(int reg, u32 v) +{ + mchip_sync(reg); + writel(v, meye.mchip_mmregs + reg); +} + +/* get the register value */ +static inline u32 mchip_read(int reg) +{ + mchip_sync(reg); + return readl(meye.mchip_mmregs + reg); +} + +/* wait for a register to become a particular value */ +static inline int mchip_delay(u32 reg, u32 v) +{ + int n = 10; + while (--n && mchip_read(reg) != v) + udelay(1); + return n; +} + +/* setup subsampling */ +static void mchip_subsample(void) +{ + mchip_set(MCHIP_MCC_R_SAMPLING, meye.params.subsample); + mchip_set(MCHIP_MCC_R_XRANGE, mchip_hsize()); + mchip_set(MCHIP_MCC_R_YRANGE, mchip_vsize()); + mchip_set(MCHIP_MCC_B_XRANGE, mchip_hsize()); + mchip_set(MCHIP_MCC_B_YRANGE, mchip_vsize()); + mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE); +} + +/* set the framerate into the mchip */ +static void mchip_set_framerate(void) +{ + mchip_set(MCHIP_HIC_S_RATE, meye.params.framerate); +} + +/* load some huffman and quantisation tables into the VRJ chip ready + for JPEG compression */ +static void mchip_load_tables(void) +{ + int i; + int length; + u16 *tables; + + tables = jpeg_huffman_tables(&length); + for (i = 0; i < length; i++) + writel(tables[i], meye.mchip_mmregs + MCHIP_VRJ_TABLE_DATA); + + tables = jpeg_quantisation_tables(&length, meye.params.quality); + for (i = 0; i < length; i++) + writel(tables[i], meye.mchip_mmregs + MCHIP_VRJ_TABLE_DATA); +} + +/* setup the VRJ parameters in the chip */ +static void mchip_vrj_setup(u8 mode) +{ + mchip_set(MCHIP_VRJ_BUS_MODE, 5); + mchip_set(MCHIP_VRJ_SIGNAL_ACTIVE_LEVEL, 0x1f); + mchip_set(MCHIP_VRJ_PDAT_USE, 1); + mchip_set(MCHIP_VRJ_IRQ_FLAG, 0xa0); + mchip_set(MCHIP_VRJ_MODE_SPECIFY, mode); + mchip_set(MCHIP_VRJ_NUM_LINES, mchip_vsize()); + mchip_set(MCHIP_VRJ_NUM_PIXELS, mchip_hsize()); + mchip_set(MCHIP_VRJ_NUM_COMPONENTS, 0x1b); + mchip_set(MCHIP_VRJ_LIMIT_COMPRESSED_LO, 0xFFFF); + mchip_set(MCHIP_VRJ_LIMIT_COMPRESSED_HI, 0xFFFF); + mchip_set(MCHIP_VRJ_COMP_DATA_FORMAT, 0xC); + mchip_set(MCHIP_VRJ_RESTART_INTERVAL, 0); + mchip_set(MCHIP_VRJ_SOF1, 0x601); + mchip_set(MCHIP_VRJ_SOF2, 0x1502); + mchip_set(MCHIP_VRJ_SOF3, 0x1503); + mchip_set(MCHIP_VRJ_SOF4, 0x1596); + mchip_set(MCHIP_VRJ_SOS, 0x0ed0); + + mchip_load_tables(); +} + +/* sets the DMA parameters into the chip */ +static void mchip_dma_setup(dma_addr_t dma_addr) +{ + int i; + + mchip_set(MCHIP_MM_PT_ADDR, (u32)dma_addr); + for (i = 0; i < 4; i++) + mchip_set(MCHIP_MM_FIR(i), 0); + meye.mchip_fnum = 0; +} + +/* setup for DMA transfers - also zeros the framebuffer */ +static int mchip_dma_alloc(void) +{ + if (!meye.mchip_dmahandle) + if (ptable_alloc()) + return -1; + return 0; +} + +/* frees the DMA buffer */ +static void mchip_dma_free(void) +{ + if (meye.mchip_dmahandle) { + mchip_dma_setup(0); + ptable_free(); + } +} + +/* stop any existing HIC action and wait for any dma to complete then + reset the dma engine */ +static void mchip_hic_stop(void) +{ + int i, j; + + meye.mchip_mode = MCHIP_HIC_MODE_NOOP; + if (!(mchip_read(MCHIP_HIC_STATUS) & MCHIP_HIC_STATUS_BUSY)) + return; + for (i = 0; i < 20; ++i) { + mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_STOP); + mchip_delay(MCHIP_HIC_CMD, 0); + for (j = 0; j < 100; ++j) { + if (mchip_delay(MCHIP_HIC_STATUS, + MCHIP_HIC_STATUS_IDLE)) + return; + msleep(1); + } + printk(KERN_ERR "meye: need to reset HIC!\n"); + + mchip_set(MCHIP_HIC_CTL, MCHIP_HIC_CTL_SOFT_RESET); + msleep(250); + } + printk(KERN_ERR "meye: resetting HIC hanged!\n"); +} + +/****************************************************************************/ +/* MCHIP frame processing functions */ +/****************************************************************************/ + +/* get the next ready frame from the dma engine */ +static u32 mchip_get_frame(void) +{ + u32 v; + + v = mchip_read(MCHIP_MM_FIR(meye.mchip_fnum)); + return v; +} + +/* frees the current frame from the dma engine */ +static void mchip_free_frame(void) +{ + mchip_set(MCHIP_MM_FIR(meye.mchip_fnum), 0); + meye.mchip_fnum++; + meye.mchip_fnum %= 4; +} + +/* read one frame from the framebuffer assuming it was captured using + a uncompressed transfer */ +static void mchip_cont_read_frame(u32 v, u8 *buf, int size) +{ + int pt_id; + + pt_id = (v >> 17) & 0x3FF; + + ptable_copy(buf, pt_id, size, MCHIP_NB_PAGES); +} + +/* read a compressed frame from the framebuffer */ +static int mchip_comp_read_frame(u32 v, u8 *buf, int size) +{ + int pt_start, pt_end, trailer; + int fsize; + int i; + + pt_start = (v >> 19) & 0xFF; + pt_end = (v >> 11) & 0xFF; + trailer = (v >> 1) & 0x3FF; + + if (pt_end < pt_start) + fsize = (MCHIP_NB_PAGES_MJPEG - pt_start) * PAGE_SIZE + + pt_end * PAGE_SIZE + trailer * 4; + else + fsize = (pt_end - pt_start) * PAGE_SIZE + trailer * 4; + + if (fsize > size) { + printk(KERN_WARNING "meye: oversized compressed frame %d\n", + fsize); + return -1; + } + + ptable_copy(buf, pt_start, fsize, MCHIP_NB_PAGES_MJPEG); + +#ifdef MEYE_JPEG_CORRECTION + + /* Some mchip generated jpeg frames are incorrect. In most + * (all ?) of those cases, the final EOI (0xff 0xd9) marker + * is not present at the end of the frame. + * + * Since adding the final marker is not enough to restore + * the jpeg integrity, we drop the frame. + */ + + for (i = fsize - 1; i > 0 && buf[i] == 0xff; i--) ; + + if (i < 2 || buf[i - 1] != 0xff || buf[i] != 0xd9) + return -1; + +#endif + + return fsize; +} + +/* take a picture into SDRAM */ +static void mchip_take_picture(void) +{ + int i; + + mchip_hic_stop(); + mchip_subsample(); + mchip_dma_setup(meye.mchip_dmahandle); + + mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_STILL_CAP); + mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); + + mchip_delay(MCHIP_HIC_CMD, 0); + + for (i = 0; i < 100; ++i) { + if (mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE)) + break; + msleep(1); + } +} + +/* dma a previously taken picture into a buffer */ +static void mchip_get_picture(u8 *buf, int bufsize) +{ + u32 v; + int i; + + mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_STILL_OUT); + mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); + + mchip_delay(MCHIP_HIC_CMD, 0); + for (i = 0; i < 100; ++i) { + if (mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE)) + break; + msleep(1); + } + for (i = 0; i < 4; ++i) { + v = mchip_get_frame(); + if (v & MCHIP_MM_FIR_RDY) { + mchip_cont_read_frame(v, buf, bufsize); + break; + } + mchip_free_frame(); + } +} + +/* start continuous dma capture */ +static void mchip_continuous_start(void) +{ + mchip_hic_stop(); + mchip_subsample(); + mchip_set_framerate(); + mchip_dma_setup(meye.mchip_dmahandle); + + meye.mchip_mode = MCHIP_HIC_MODE_CONT_OUT; + + mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_CONT_OUT); + mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); + + mchip_delay(MCHIP_HIC_CMD, 0); +} + +/* compress one frame into a buffer */ +static int mchip_compress_frame(u8 *buf, int bufsize) +{ + u32 v; + int len = -1, i; + + mchip_vrj_setup(0x3f); + udelay(50); + + mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_STILL_COMP); + mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); + + mchip_delay(MCHIP_HIC_CMD, 0); + for (i = 0; i < 100; ++i) { + if (mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE)) + break; + msleep(1); + } + + for (i = 0; i < 4; ++i) { + v = mchip_get_frame(); + if (v & MCHIP_MM_FIR_RDY) { + len = mchip_comp_read_frame(v, buf, bufsize); + break; + } + mchip_free_frame(); + } + return len; +} + +#if 0 +/* uncompress one image into a buffer */ +static int mchip_uncompress_frame(u8 *img, int imgsize, u8 *buf, int bufsize) +{ + mchip_vrj_setup(0x3f); + udelay(50); + + mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_STILL_DECOMP); + mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); + + mchip_delay(MCHIP_HIC_CMD, 0); + + return mchip_comp_read_frame(buf, bufsize); +} +#endif + +/* start continuous compressed capture */ +static void mchip_cont_compression_start(void) +{ + mchip_hic_stop(); + mchip_vrj_setup(0x3f); + mchip_subsample(); + mchip_set_framerate(); + mchip_dma_setup(meye.mchip_dmahandle); + + meye.mchip_mode = MCHIP_HIC_MODE_CONT_COMP; + + mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_CONT_COMP); + mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); + + mchip_delay(MCHIP_HIC_CMD, 0); +} + +/****************************************************************************/ +/* Interrupt handling */ +/****************************************************************************/ + +static irqreturn_t meye_irq(int irq, void *dev_id) +{ + u32 v; + int reqnr; + static int sequence; + + v = mchip_read(MCHIP_MM_INTA); + + if (meye.mchip_mode != MCHIP_HIC_MODE_CONT_OUT && + meye.mchip_mode != MCHIP_HIC_MODE_CONT_COMP) + return IRQ_NONE; + +again: + v = mchip_get_frame(); + if (!(v & MCHIP_MM_FIR_RDY)) + return IRQ_HANDLED; + + if (meye.mchip_mode == MCHIP_HIC_MODE_CONT_OUT) { + if (kfifo_out_locked(&meye.grabq, (unsigned char *)&reqnr, + sizeof(int), &meye.grabq_lock) != sizeof(int)) { + mchip_free_frame(); + return IRQ_HANDLED; + } + mchip_cont_read_frame(v, meye.grab_fbuffer + gbufsize * reqnr, + mchip_hsize() * mchip_vsize() * 2); + meye.grab_buffer[reqnr].size = mchip_hsize() * mchip_vsize() * 2; + meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; + v4l2_get_timestamp(&meye.grab_buffer[reqnr].timestamp); + meye.grab_buffer[reqnr].sequence = sequence++; + kfifo_in_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock); + wake_up_interruptible(&meye.proc_list); + } else { + int size; + size = mchip_comp_read_frame(v, meye.grab_temp, gbufsize); + if (size == -1) { + mchip_free_frame(); + goto again; + } + if (kfifo_out_locked(&meye.grabq, (unsigned char *)&reqnr, + sizeof(int), &meye.grabq_lock) != sizeof(int)) { + mchip_free_frame(); + goto again; + } + memcpy(meye.grab_fbuffer + gbufsize * reqnr, meye.grab_temp, + size); + meye.grab_buffer[reqnr].size = size; + meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; + v4l2_get_timestamp(&meye.grab_buffer[reqnr].timestamp); + meye.grab_buffer[reqnr].sequence = sequence++; + kfifo_in_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock); + wake_up_interruptible(&meye.proc_list); + } + mchip_free_frame(); + goto again; +} + +/****************************************************************************/ +/* video4linux integration */ +/****************************************************************************/ + +static int meye_open(struct file *file) +{ + int i; + + if (test_and_set_bit(0, &meye.in_use)) + return -EBUSY; + + mchip_hic_stop(); + + if (mchip_dma_alloc()) { + printk(KERN_ERR "meye: mchip framebuffer allocation failed\n"); + clear_bit(0, &meye.in_use); + return -ENOBUFS; + } + + for (i = 0; i < MEYE_MAX_BUFNBRS; i++) + meye.grab_buffer[i].state = MEYE_BUF_UNUSED; + kfifo_reset(&meye.grabq); + kfifo_reset(&meye.doneq); + return v4l2_fh_open(file); +} + +static int meye_release(struct file *file) +{ + mchip_hic_stop(); + mchip_dma_free(); + clear_bit(0, &meye.in_use); + return v4l2_fh_release(file); +} + +static int meyeioc_g_params(struct meye_params *p) +{ + *p = meye.params; + return 0; +} + +static int meyeioc_s_params(struct meye_params *jp) +{ + if (jp->subsample > 1) + return -EINVAL; + + if (jp->quality > 10) + return -EINVAL; + + if (jp->sharpness > 63 || jp->agc > 63 || jp->picture > 63) + return -EINVAL; + + if (jp->framerate > 31) + return -EINVAL; + + mutex_lock(&meye.lock); + + if (meye.params.subsample != jp->subsample || + meye.params.quality != jp->quality) + mchip_hic_stop(); /* need restart */ + + meye.params = *jp; + sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS, + meye.params.sharpness); + sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, + meye.params.agc); + sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, + meye.params.picture); + mutex_unlock(&meye.lock); + + return 0; +} + +static int meyeioc_qbuf_capt(int *nb) +{ + if (!meye.grab_fbuffer) + return -EINVAL; + + if (*nb >= gbuffers) + return -EINVAL; + + if (*nb < 0) { + /* stop capture */ + mchip_hic_stop(); + return 0; + } + + if (meye.grab_buffer[*nb].state != MEYE_BUF_UNUSED) + return -EBUSY; + + mutex_lock(&meye.lock); + + if (meye.mchip_mode != MCHIP_HIC_MODE_CONT_COMP) + mchip_cont_compression_start(); + + meye.grab_buffer[*nb].state = MEYE_BUF_USING; + kfifo_in_locked(&meye.grabq, (unsigned char *)nb, sizeof(int), + &meye.grabq_lock); + mutex_unlock(&meye.lock); + + return 0; +} + +static int meyeioc_sync(struct file *file, void *fh, int *i) +{ + int unused; + + if (*i < 0 || *i >= gbuffers) + return -EINVAL; + + mutex_lock(&meye.lock); + switch (meye.grab_buffer[*i].state) { + + case MEYE_BUF_UNUSED: + mutex_unlock(&meye.lock); + return -EINVAL; + case MEYE_BUF_USING: + if (file->f_flags & O_NONBLOCK) { + mutex_unlock(&meye.lock); + return -EAGAIN; + } + if (wait_event_interruptible(meye.proc_list, + (meye.grab_buffer[*i].state != MEYE_BUF_USING))) { + mutex_unlock(&meye.lock); + return -EINTR; + } + /* fall through */ + case MEYE_BUF_DONE: + meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; + if (kfifo_out_locked(&meye.doneq, (unsigned char *)&unused, + sizeof(int), &meye.doneq_lock) != sizeof(int)) + break; + } + *i = meye.grab_buffer[*i].size; + mutex_unlock(&meye.lock); + return 0; +} + +static int meyeioc_stillcapt(void) +{ + if (!meye.grab_fbuffer) + return -EINVAL; + + if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) + return -EBUSY; + + mutex_lock(&meye.lock); + meye.grab_buffer[0].state = MEYE_BUF_USING; + mchip_take_picture(); + + mchip_get_picture(meye.grab_fbuffer, + mchip_hsize() * mchip_vsize() * 2); + + meye.grab_buffer[0].state = MEYE_BUF_DONE; + mutex_unlock(&meye.lock); + + return 0; +} + +static int meyeioc_stilljcapt(int *len) +{ + if (!meye.grab_fbuffer) + return -EINVAL; + + if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) + return -EBUSY; + + mutex_lock(&meye.lock); + meye.grab_buffer[0].state = MEYE_BUF_USING; + *len = -1; + + while (*len == -1) { + mchip_take_picture(); + *len = mchip_compress_frame(meye.grab_fbuffer, gbufsize); + } + + meye.grab_buffer[0].state = MEYE_BUF_DONE; + mutex_unlock(&meye.lock); + return 0; +} + +static int vidioc_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + strcpy(cap->driver, "meye"); + strcpy(cap->card, "meye"); + sprintf(cap->bus_info, "PCI:%s", pci_name(meye.mchip_dev)); + + cap->version = (MEYE_DRIVER_MAJORVERSION << 8) + + MEYE_DRIVER_MINORVERSION; + + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; + + strcpy(i->name, "Camera"); + i->type = V4L2_INPUT_TYPE_CAMERA; + + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int i) +{ + if (i != 0) + return -EINVAL; + + return 0; +} + +static int meye_s_ctrl(struct v4l2_ctrl *ctrl) +{ + mutex_lock(&meye.lock); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, ctrl->val); + meye.brightness = ctrl->val << 10; + break; + case V4L2_CID_HUE: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERAHUE, ctrl->val); + meye.hue = ctrl->val << 10; + break; + case V4L2_CID_CONTRAST: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERACONTRAST, ctrl->val); + meye.contrast = ctrl->val << 10; + break; + case V4L2_CID_SATURATION: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERACOLOR, ctrl->val); + meye.colour = ctrl->val << 10; + break; + case V4L2_CID_MEYE_AGC: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERAAGC, ctrl->val); + meye.params.agc = ctrl->val; + break; + case V4L2_CID_SHARPNESS: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERASHARPNESS, ctrl->val); + meye.params.sharpness = ctrl->val; + break; + case V4L2_CID_MEYE_PICTURE: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERAPICTURE, ctrl->val); + meye.params.picture = ctrl->val; + break; + case V4L2_CID_JPEG_COMPRESSION_QUALITY: + meye.params.quality = ctrl->val; + break; + case V4L2_CID_MEYE_FRAMERATE: + meye.params.framerate = ctrl->val; + break; + default: + mutex_unlock(&meye.lock); + return -EINVAL; + } + mutex_unlock(&meye.lock); + + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + if (f->index > 1) + return -EINVAL; + + if (f->index == 0) { + /* standard YUV 422 capture */ + f->flags = 0; + strcpy(f->description, "YUV422"); + f->pixelformat = V4L2_PIX_FMT_YUYV; + } else { + /* compressed MJPEG capture */ + f->flags = V4L2_FMT_FLAG_COMPRESSED; + strcpy(f->description, "MJPEG"); + f->pixelformat = V4L2_PIX_FMT_MJPEG; + } + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *f) +{ + if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV && + f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) + return -EINVAL; + + if (f->fmt.pix.field != V4L2_FIELD_ANY && + f->fmt.pix.field != V4L2_FIELD_NONE) + return -EINVAL; + + f->fmt.pix.field = V4L2_FIELD_NONE; + + if (f->fmt.pix.width <= 320) { + f->fmt.pix.width = 320; + f->fmt.pix.height = 240; + } else { + f->fmt.pix.width = 640; + f->fmt.pix.height = 480; + } + + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.height * + f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = 0; + f->fmt.pix.priv = 0; + + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *f) +{ + switch (meye.mchip_mode) { + case MCHIP_HIC_MODE_CONT_OUT: + default: + f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; + break; + case MCHIP_HIC_MODE_CONT_COMP: + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MJPEG; + break; + } + + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.width = mchip_hsize(); + f->fmt.pix.height = mchip_vsize(); + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.height * + f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *f) +{ + if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV && + f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) + return -EINVAL; + + if (f->fmt.pix.field != V4L2_FIELD_ANY && + f->fmt.pix.field != V4L2_FIELD_NONE) + return -EINVAL; + + f->fmt.pix.field = V4L2_FIELD_NONE; + mutex_lock(&meye.lock); + + if (f->fmt.pix.width <= 320) { + f->fmt.pix.width = 320; + f->fmt.pix.height = 240; + meye.params.subsample = 1; + } else { + f->fmt.pix.width = 640; + f->fmt.pix.height = 480; + meye.params.subsample = 0; + } + + switch (f->fmt.pix.pixelformat) { + case V4L2_PIX_FMT_YUYV: + meye.mchip_mode = MCHIP_HIC_MODE_CONT_OUT; + break; + case V4L2_PIX_FMT_MJPEG: + meye.mchip_mode = MCHIP_HIC_MODE_CONT_COMP; + break; + } + + mutex_unlock(&meye.lock); + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.height * + f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = 0; + f->fmt.pix.priv = 0; + + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *req) +{ + int i; + + if (req->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (meye.grab_fbuffer && req->count == gbuffers) { + /* already allocated, no modifications */ + return 0; + } + + mutex_lock(&meye.lock); + if (meye.grab_fbuffer) { + for (i = 0; i < gbuffers; i++) + if (meye.vma_use_count[i]) { + mutex_unlock(&meye.lock); + return -EINVAL; + } + rvfree(meye.grab_fbuffer, gbuffers * gbufsize); + meye.grab_fbuffer = NULL; + } + + gbuffers = max(2, min((int)req->count, MEYE_MAX_BUFNBRS)); + req->count = gbuffers; + meye.grab_fbuffer = rvmalloc(gbuffers * gbufsize); + + if (!meye.grab_fbuffer) { + printk(KERN_ERR "meye: v4l framebuffer allocation" + " failed\n"); + mutex_unlock(&meye.lock); + return -ENOMEM; + } + + for (i = 0; i < gbuffers; i++) + meye.vma_use_count[i] = 0; + + mutex_unlock(&meye.lock); + + return 0; +} + +static int vidioc_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + unsigned int index = buf->index; + + if (index >= gbuffers) + return -EINVAL; + + buf->bytesused = meye.grab_buffer[index].size; + buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + + if (meye.grab_buffer[index].state == MEYE_BUF_USING) + buf->flags |= V4L2_BUF_FLAG_QUEUED; + + if (meye.grab_buffer[index].state == MEYE_BUF_DONE) + buf->flags |= V4L2_BUF_FLAG_DONE; + + buf->field = V4L2_FIELD_NONE; + buf->timestamp = meye.grab_buffer[index].timestamp; + buf->sequence = meye.grab_buffer[index].sequence; + buf->memory = V4L2_MEMORY_MMAP; + buf->m.offset = index * gbufsize; + buf->length = gbufsize; + + return 0; +} + +static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + if (buf->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (buf->index >= gbuffers) + return -EINVAL; + + if (meye.grab_buffer[buf->index].state != MEYE_BUF_UNUSED) + return -EINVAL; + + mutex_lock(&meye.lock); + buf->flags |= V4L2_BUF_FLAG_QUEUED; + buf->flags &= ~V4L2_BUF_FLAG_DONE; + meye.grab_buffer[buf->index].state = MEYE_BUF_USING; + kfifo_in_locked(&meye.grabq, (unsigned char *)&buf->index, + sizeof(int), &meye.grabq_lock); + mutex_unlock(&meye.lock); + + return 0; +} + +static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + int reqnr; + + if (buf->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + mutex_lock(&meye.lock); + + if (kfifo_len(&meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { + mutex_unlock(&meye.lock); + return -EAGAIN; + } + + if (wait_event_interruptible(meye.proc_list, + kfifo_len(&meye.doneq) != 0) < 0) { + mutex_unlock(&meye.lock); + return -EINTR; + } + + if (!kfifo_out_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock)) { + mutex_unlock(&meye.lock); + return -EBUSY; + } + + if (meye.grab_buffer[reqnr].state != MEYE_BUF_DONE) { + mutex_unlock(&meye.lock); + return -EINVAL; + } + + buf->index = reqnr; + buf->bytesused = meye.grab_buffer[reqnr].size; + buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + buf->field = V4L2_FIELD_NONE; + buf->timestamp = meye.grab_buffer[reqnr].timestamp; + buf->sequence = meye.grab_buffer[reqnr].sequence; + buf->memory = V4L2_MEMORY_MMAP; + buf->m.offset = reqnr * gbufsize; + buf->length = gbufsize; + meye.grab_buffer[reqnr].state = MEYE_BUF_UNUSED; + mutex_unlock(&meye.lock); + + return 0; +} + +static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) +{ + mutex_lock(&meye.lock); + + switch (meye.mchip_mode) { + case MCHIP_HIC_MODE_CONT_OUT: + mchip_continuous_start(); + break; + case MCHIP_HIC_MODE_CONT_COMP: + mchip_cont_compression_start(); + break; + default: + mutex_unlock(&meye.lock); + return -EINVAL; + } + + mutex_unlock(&meye.lock); + + return 0; +} + +static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) +{ + mutex_lock(&meye.lock); + mchip_hic_stop(); + kfifo_reset(&meye.grabq); + kfifo_reset(&meye.doneq); + + for (i = 0; i < MEYE_MAX_BUFNBRS; i++) + meye.grab_buffer[i].state = MEYE_BUF_UNUSED; + + mutex_unlock(&meye.lock); + return 0; +} + +static long vidioc_default(struct file *file, void *fh, bool valid_prio, + unsigned int cmd, void *arg) +{ + switch (cmd) { + case MEYEIOC_G_PARAMS: + return meyeioc_g_params((struct meye_params *) arg); + + case MEYEIOC_S_PARAMS: + return meyeioc_s_params((struct meye_params *) arg); + + case MEYEIOC_QBUF_CAPT: + return meyeioc_qbuf_capt((int *) arg); + + case MEYEIOC_SYNC: + return meyeioc_sync(file, fh, (int *) arg); + + case MEYEIOC_STILLCAPT: + return meyeioc_stillcapt(); + + case MEYEIOC_STILLJCAPT: + return meyeioc_stilljcapt((int *) arg); + + default: + return -ENOTTY; + } + +} + +static unsigned int meye_poll(struct file *file, poll_table *wait) +{ + unsigned int res = v4l2_ctrl_poll(file, wait); + + mutex_lock(&meye.lock); + poll_wait(file, &meye.proc_list, wait); + if (kfifo_len(&meye.doneq)) + res |= POLLIN | POLLRDNORM; + mutex_unlock(&meye.lock); + return res; +} + +static void meye_vm_open(struct vm_area_struct *vma) +{ + long idx = (long)vma->vm_private_data; + meye.vma_use_count[idx]++; +} + +static void meye_vm_close(struct vm_area_struct *vma) +{ + long idx = (long)vma->vm_private_data; + meye.vma_use_count[idx]--; +} + +static const struct vm_operations_struct meye_vm_ops = { + .open = meye_vm_open, + .close = meye_vm_close, +}; + +static int meye_mmap(struct file *file, struct vm_area_struct *vma) +{ + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end - vma->vm_start; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long page, pos; + + mutex_lock(&meye.lock); + if (size > gbuffers * gbufsize) { + mutex_unlock(&meye.lock); + return -EINVAL; + } + if (!meye.grab_fbuffer) { + int i; + + /* lazy allocation */ + meye.grab_fbuffer = rvmalloc(gbuffers*gbufsize); + if (!meye.grab_fbuffer) { + printk(KERN_ERR "meye: v4l framebuffer allocation failed\n"); + mutex_unlock(&meye.lock); + return -ENOMEM; + } + for (i = 0; i < gbuffers; i++) + meye.vma_use_count[i] = 0; + } + pos = (unsigned long)meye.grab_fbuffer + offset; + + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { + mutex_unlock(&meye.lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + vma->vm_ops = &meye_vm_ops; + vma->vm_flags &= ~VM_IO; /* not I/O memory */ + vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; + vma->vm_private_data = (void *) (offset / gbufsize); + meye_vm_open(vma); + + mutex_unlock(&meye.lock); + return 0; +} + +static const struct v4l2_file_operations meye_fops = { + .owner = THIS_MODULE, + .open = meye_open, + .release = meye_release, + .mmap = meye_mmap, + .unlocked_ioctl = video_ioctl2, + .poll = meye_poll, +}; + +static const struct v4l2_ioctl_ops meye_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_default = vidioc_default, +}; + +static struct video_device meye_template = { + .name = "meye", + .fops = &meye_fops, + .ioctl_ops = &meye_ioctl_ops, + .release = video_device_release, +}; + +static const struct v4l2_ctrl_ops meye_ctrl_ops = { + .s_ctrl = meye_s_ctrl, +}; + +#ifdef CONFIG_PM +static int meye_suspend(struct pci_dev *pdev, pm_message_t state) +{ + pci_save_state(pdev); + meye.pm_mchip_mode = meye.mchip_mode; + mchip_hic_stop(); + mchip_set(MCHIP_MM_INTA, 0x0); + return 0; +} + +static int meye_resume(struct pci_dev *pdev) +{ + pci_restore_state(pdev); + pci_write_config_word(meye.mchip_dev, MCHIP_PCI_SOFTRESET_SET, 1); + + mchip_delay(MCHIP_HIC_CMD, 0); + mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE); + msleep(1); + mchip_set(MCHIP_VRJ_SOFT_RESET, 1); + msleep(1); + mchip_set(MCHIP_MM_PCI_MODE, 5); + msleep(1); + mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK); + + switch (meye.pm_mchip_mode) { + case MCHIP_HIC_MODE_CONT_OUT: + mchip_continuous_start(); + break; + case MCHIP_HIC_MODE_CONT_COMP: + mchip_cont_compression_start(); + break; + } + return 0; +} +#endif + +static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) +{ + static const struct v4l2_ctrl_config ctrl_agc = { + .id = V4L2_CID_MEYE_AGC, + .type = V4L2_CTRL_TYPE_INTEGER, + .ops = &meye_ctrl_ops, + .name = "AGC", + .max = 63, + .step = 1, + .def = 48, + .flags = V4L2_CTRL_FLAG_SLIDER, + }; + static const struct v4l2_ctrl_config ctrl_picture = { + .id = V4L2_CID_MEYE_PICTURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .ops = &meye_ctrl_ops, + .name = "Picture", + .max = 63, + .step = 1, + }; + static const struct v4l2_ctrl_config ctrl_framerate = { + .id = V4L2_CID_MEYE_FRAMERATE, + .type = V4L2_CTRL_TYPE_INTEGER, + .ops = &meye_ctrl_ops, + .name = "Framerate", + .max = 31, + .step = 1, + }; + struct v4l2_device *v4l2_dev = &meye.v4l2_dev; + int ret = -EBUSY; + unsigned long mchip_adr; + + if (meye.mchip_dev != NULL) { + printk(KERN_ERR "meye: only one device allowed!\n"); + goto outnotdev; + } + + ret = v4l2_device_register(&pcidev->dev, v4l2_dev); + if (ret < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + return ret; + } + ret = -ENOMEM; + meye.mchip_dev = pcidev; + meye.vdev = video_device_alloc(); + if (!meye.vdev) { + v4l2_err(v4l2_dev, "video_device_alloc() failed!\n"); + goto outnotdev; + } + + meye.grab_temp = vmalloc(MCHIP_NB_PAGES_MJPEG * PAGE_SIZE); + if (!meye.grab_temp) { + v4l2_err(v4l2_dev, "grab buffer allocation failed\n"); + goto outvmalloc; + } + + spin_lock_init(&meye.grabq_lock); + if (kfifo_alloc(&meye.grabq, sizeof(int) * MEYE_MAX_BUFNBRS, + GFP_KERNEL)) { + v4l2_err(v4l2_dev, "fifo allocation failed\n"); + goto outkfifoalloc1; + } + spin_lock_init(&meye.doneq_lock); + if (kfifo_alloc(&meye.doneq, sizeof(int) * MEYE_MAX_BUFNBRS, + GFP_KERNEL)) { + v4l2_err(v4l2_dev, "fifo allocation failed\n"); + goto outkfifoalloc2; + } + + memcpy(meye.vdev, &meye_template, sizeof(meye_template)); + meye.vdev->v4l2_dev = &meye.v4l2_dev; + + ret = -EIO; + if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) { + v4l2_err(v4l2_dev, "meye: unable to power on the camera\n"); + v4l2_err(v4l2_dev, "meye: did you enable the camera in " + "sonypi using the module options ?\n"); + goto outsonypienable; + } + + if ((ret = pci_enable_device(meye.mchip_dev))) { + v4l2_err(v4l2_dev, "meye: pci_enable_device failed\n"); + goto outenabledev; + } + + mchip_adr = pci_resource_start(meye.mchip_dev,0); + if (!mchip_adr) { + v4l2_err(v4l2_dev, "meye: mchip has no device base address\n"); + goto outregions; + } + if (!request_mem_region(pci_resource_start(meye.mchip_dev, 0), + pci_resource_len(meye.mchip_dev, 0), + "meye")) { + v4l2_err(v4l2_dev, "meye: request_mem_region failed\n"); + goto outregions; + } + meye.mchip_mmregs = ioremap(mchip_adr, MCHIP_MM_REGS); + if (!meye.mchip_mmregs) { + v4l2_err(v4l2_dev, "meye: ioremap failed\n"); + goto outremap; + } + + meye.mchip_irq = pcidev->irq; + if (request_irq(meye.mchip_irq, meye_irq, + IRQF_DISABLED | IRQF_SHARED, "meye", meye_irq)) { + v4l2_err(v4l2_dev, "request_irq failed\n"); + goto outreqirq; + } + + pci_write_config_byte(meye.mchip_dev, PCI_CACHE_LINE_SIZE, 8); + pci_write_config_byte(meye.mchip_dev, PCI_LATENCY_TIMER, 64); + + pci_set_master(meye.mchip_dev); + + /* Ask the camera to perform a soft reset. */ + pci_write_config_word(meye.mchip_dev, MCHIP_PCI_SOFTRESET_SET, 1); + + mchip_delay(MCHIP_HIC_CMD, 0); + mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE); + + msleep(1); + mchip_set(MCHIP_VRJ_SOFT_RESET, 1); + + msleep(1); + mchip_set(MCHIP_MM_PCI_MODE, 5); + + msleep(1); + mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK); + + mutex_init(&meye.lock); + init_waitqueue_head(&meye.proc_list); + + v4l2_ctrl_handler_init(&meye.hdl, 3); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 63, 1, 32); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_HUE, 0, 63, 1, 32); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_CONTRAST, 0, 63, 1, 32); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_SATURATION, 0, 63, 1, 32); + v4l2_ctrl_new_custom(&meye.hdl, &ctrl_agc, NULL); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_SHARPNESS, 0, 63, 1, 32); + v4l2_ctrl_new_custom(&meye.hdl, &ctrl_picture, NULL); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, 0, 10, 1, 8); + v4l2_ctrl_new_custom(&meye.hdl, &ctrl_framerate, NULL); + if (meye.hdl.error) { + v4l2_err(v4l2_dev, "couldn't register controls\n"); + goto outvideoreg; + } + + v4l2_ctrl_handler_setup(&meye.hdl); + meye.vdev->ctrl_handler = &meye.hdl; + set_bit(V4L2_FL_USE_FH_PRIO, &meye.vdev->flags); + + if (video_register_device(meye.vdev, VFL_TYPE_GRABBER, + video_nr) < 0) { + v4l2_err(v4l2_dev, "video_register_device failed\n"); + goto outvideoreg; + } + + v4l2_info(v4l2_dev, "Motion Eye Camera Driver v%s.\n", + MEYE_DRIVER_VERSION); + v4l2_info(v4l2_dev, "mchip KL5A72002 rev. %d, base %lx, irq %d\n", + meye.mchip_dev->revision, mchip_adr, meye.mchip_irq); + + return 0; + +outvideoreg: + v4l2_ctrl_handler_free(&meye.hdl); + free_irq(meye.mchip_irq, meye_irq); +outreqirq: + iounmap(meye.mchip_mmregs); +outremap: + release_mem_region(pci_resource_start(meye.mchip_dev, 0), + pci_resource_len(meye.mchip_dev, 0)); +outregions: + pci_disable_device(meye.mchip_dev); +outenabledev: + sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0); +outsonypienable: + kfifo_free(&meye.doneq); +outkfifoalloc2: + kfifo_free(&meye.grabq); +outkfifoalloc1: + vfree(meye.grab_temp); +outvmalloc: + video_device_release(meye.vdev); +outnotdev: + return ret; +} + +static void meye_remove(struct pci_dev *pcidev) +{ + video_unregister_device(meye.vdev); + + mchip_hic_stop(); + + mchip_dma_free(); + + /* disable interrupts */ + mchip_set(MCHIP_MM_INTA, 0x0); + + free_irq(meye.mchip_irq, meye_irq); + + iounmap(meye.mchip_mmregs); + + release_mem_region(pci_resource_start(meye.mchip_dev, 0), + pci_resource_len(meye.mchip_dev, 0)); + + pci_disable_device(meye.mchip_dev); + + sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0); + + kfifo_free(&meye.doneq); + kfifo_free(&meye.grabq); + + vfree(meye.grab_temp); + + if (meye.grab_fbuffer) { + rvfree(meye.grab_fbuffer, gbuffers*gbufsize); + meye.grab_fbuffer = NULL; + } + + printk(KERN_INFO "meye: removed\n"); +} + +static struct pci_device_id meye_pci_tbl[] = { + { PCI_VDEVICE(KAWASAKI, PCI_DEVICE_ID_MCHIP_KL5A72002), 0 }, + { } +}; + +MODULE_DEVICE_TABLE(pci, meye_pci_tbl); + +static struct pci_driver meye_driver = { + .name = "meye", + .id_table = meye_pci_tbl, + .probe = meye_probe, + .remove = meye_remove, +#ifdef CONFIG_PM + .suspend = meye_suspend, + .resume = meye_resume, +#endif +}; + +static int __init meye_init(void) +{ + gbuffers = max(2, min((int)gbuffers, MEYE_MAX_BUFNBRS)); + if (gbufsize > MEYE_MAX_BUFSIZE) + gbufsize = MEYE_MAX_BUFSIZE; + gbufsize = PAGE_ALIGN(gbufsize); + printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) " + "for capture\n", + gbuffers, + gbufsize / 1024, gbuffers * gbufsize / 1024); + return pci_register_driver(&meye_driver); +} + +static void __exit meye_exit(void) +{ + pci_unregister_driver(&meye_driver); +} + +module_init(meye_init); +module_exit(meye_exit); diff --git a/drivers/media/pci/meye/meye.h b/drivers/media/pci/meye/meye.h new file mode 100644 index 00000000..6fed9274 --- /dev/null +++ b/drivers/media/pci/meye/meye.h @@ -0,0 +1,326 @@ +/* + * Motion Eye video4linux driver for Sony Vaio PictureBook + * + * Copyright (C) 2001-2004 Stelian Pop + * + * Copyright (C) 2001-2002 Alcôve + * + * Copyright (C) 2000 Andrew Tridgell + * + * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras. + * + * Some parts borrowed from various video4linux drivers, especially + * bttv-driver.c and zoran.c, see original files for credits. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _MEYE_PRIV_H_ +#define _MEYE_PRIV_H_ + +#define MEYE_DRIVER_MAJORVERSION 1 +#define MEYE_DRIVER_MINORVERSION 14 + +#define MEYE_DRIVER_VERSION __stringify(MEYE_DRIVER_MAJORVERSION) "." \ + __stringify(MEYE_DRIVER_MINORVERSION) + +#include +#include +#include +#include + +/****************************************************************************/ +/* Motion JPEG chip registers */ +/****************************************************************************/ + +/* Motion JPEG chip PCI configuration registers */ +#define MCHIP_PCI_POWER_CSR 0x54 +#define MCHIP_PCI_MCORE_STATUS 0x60 /* see HIC_STATUS */ +#define MCHIP_PCI_HOSTUSEREQ_SET 0x64 +#define MCHIP_PCI_HOSTUSEREQ_CLR 0x68 +#define MCHIP_PCI_LOWPOWER_SET 0x6c +#define MCHIP_PCI_LOWPOWER_CLR 0x70 +#define MCHIP_PCI_SOFTRESET_SET 0x74 + +/* Motion JPEG chip memory mapped registers */ +#define MCHIP_MM_REGS 0x200 /* 512 bytes */ +#define MCHIP_REG_TIMEOUT 1000 /* reg access, ~us */ +#define MCHIP_MCC_VRJ_TIMEOUT 1000 /* MCC & VRJ access */ + +#define MCHIP_MM_PCI_MODE 0x00 /* PCI access mode */ +#define MCHIP_MM_PCI_MODE_RETRY 0x00000001 /* retry mode */ +#define MCHIP_MM_PCI_MODE_MASTER 0x00000002 /* master access */ +#define MCHIP_MM_PCI_MODE_READ_LINE 0x00000004 /* read line */ + +#define MCHIP_MM_INTA 0x04 /* Int status/mask */ +#define MCHIP_MM_INTA_MCC 0x00000001 /* MCC interrupt */ +#define MCHIP_MM_INTA_VRJ 0x00000002 /* VRJ interrupt */ +#define MCHIP_MM_INTA_HIC_1 0x00000004 /* one frame done */ +#define MCHIP_MM_INTA_HIC_1_MASK 0x00000400 /* 1: enable */ +#define MCHIP_MM_INTA_HIC_END 0x00000008 /* all frames done */ +#define MCHIP_MM_INTA_HIC_END_MASK 0x00000800 +#define MCHIP_MM_INTA_JPEG 0x00000010 /* decompress. error */ +#define MCHIP_MM_INTA_JPEG_MASK 0x00001000 +#define MCHIP_MM_INTA_CAPTURE 0x00000020 /* capture end */ +#define MCHIP_MM_INTA_PCI_ERR 0x00000040 /* PCI error */ +#define MCHIP_MM_INTA_PCI_ERR_MASK 0x00004000 + +#define MCHIP_MM_PT_ADDR 0x08 /* page table address*/ + /* n*4kB */ +#define MCHIP_NB_PAGES 1024 /* pages for display */ +#define MCHIP_NB_PAGES_MJPEG 256 /* pages for mjpeg */ + +#define MCHIP_MM_FIR(n) (0x0c+(n)*4) /* Frame info 0-3 */ +#define MCHIP_MM_FIR_RDY 0x00000001 /* frame ready */ +#define MCHIP_MM_FIR_FAILFR_MASK 0xf8000000 /* # of failed frames */ +#define MCHIP_MM_FIR_FAILFR_SHIFT 27 + + /* continuous comp/decomp mode */ +#define MCHIP_MM_FIR_C_ENDL_MASK 0x000007fe /* end DW [10] */ +#define MCHIP_MM_FIR_C_ENDL_SHIFT 1 +#define MCHIP_MM_FIR_C_ENDP_MASK 0x0007f800 /* end page [8] */ +#define MCHIP_MM_FIR_C_ENDP_SHIFT 11 +#define MCHIP_MM_FIR_C_STARTP_MASK 0x07f80000 /* start page [8] */ +#define MCHIP_MM_FIR_C_STARTP_SHIFT 19 + + /* continuous picture output mode */ +#define MCHIP_MM_FIR_O_STARTP_MASK 0x7ffe0000 /* start page [10] */ +#define MCHIP_MM_FIR_O_STARTP_SHIFT 17 + +#define MCHIP_MM_FIFO_DATA 0x1c /* PCI TGT FIFO data */ +#define MCHIP_MM_FIFO_STATUS 0x20 /* PCI TGT FIFO stat */ +#define MCHIP_MM_FIFO_MASK 0x00000003 +#define MCHIP_MM_FIFO_WAIT_OR_READY 0x00000002 /* Bits common to WAIT & READY*/ +#define MCHIP_MM_FIFO_IDLE 0x0 /* HIC idle */ +#define MCHIP_MM_FIFO_IDLE1 0x1 /* idem ??? */ +#define MCHIP_MM_FIFO_WAIT 0x2 /* wait request */ +#define MCHIP_MM_FIFO_READY 0x3 /* data ready */ + +#define MCHIP_HIC_HOST_USEREQ 0x40 /* host uses MCORE */ + +#define MCHIP_HIC_TP_BUSY 0x44 /* taking picture */ + +#define MCHIP_HIC_PIC_SAVED 0x48 /* pic in SDRAM */ + +#define MCHIP_HIC_LOWPOWER 0x4c /* clock stopped */ + +#define MCHIP_HIC_CTL 0x50 /* HIC control */ +#define MCHIP_HIC_CTL_SOFT_RESET 0x00000001 /* MCORE reset */ +#define MCHIP_HIC_CTL_MCORE_RDY 0x00000002 /* MCORE ready */ + +#define MCHIP_HIC_CMD 0x54 /* HIC command */ +#define MCHIP_HIC_CMD_BITS 0x00000003 /* cmd width=[1:0]*/ +#define MCHIP_HIC_CMD_NOOP 0x0 +#define MCHIP_HIC_CMD_START 0x1 +#define MCHIP_HIC_CMD_STOP 0x2 + +#define MCHIP_HIC_MODE 0x58 +#define MCHIP_HIC_MODE_NOOP 0x0 +#define MCHIP_HIC_MODE_STILL_CAP 0x1 /* still pic capt */ +#define MCHIP_HIC_MODE_DISPLAY 0x2 /* display */ +#define MCHIP_HIC_MODE_STILL_COMP 0x3 /* still pic comp. */ +#define MCHIP_HIC_MODE_STILL_DECOMP 0x4 /* still pic decomp. */ +#define MCHIP_HIC_MODE_CONT_COMP 0x5 /* cont capt+comp */ +#define MCHIP_HIC_MODE_CONT_DECOMP 0x6 /* cont decomp+disp */ +#define MCHIP_HIC_MODE_STILL_OUT 0x7 /* still pic output */ +#define MCHIP_HIC_MODE_CONT_OUT 0x8 /* cont output */ + +#define MCHIP_HIC_STATUS 0x5c +#define MCHIP_HIC_STATUS_MCC_RDY 0x00000001 /* MCC reg acc ok */ +#define MCHIP_HIC_STATUS_VRJ_RDY 0x00000002 /* VRJ reg acc ok */ +#define MCHIP_HIC_STATUS_IDLE 0x00000003 +#define MCHIP_HIC_STATUS_CAPDIS 0x00000004 /* cap/disp in prog */ +#define MCHIP_HIC_STATUS_COMPDEC 0x00000008 /* (de)comp in prog */ +#define MCHIP_HIC_STATUS_BUSY 0x00000010 /* HIC busy */ + +#define MCHIP_HIC_S_RATE 0x60 /* MJPEG # frames */ + +#define MCHIP_HIC_PCI_VFMT 0x64 /* video format */ +#define MCHIP_HIC_PCI_VFMT_YVYU 0x00000001 /* 0: V Y' U Y */ + /* 1: Y' V Y U */ + +#define MCHIP_MCC_CMD 0x80 /* MCC commands */ +#define MCHIP_MCC_CMD_INITIAL 0x0 /* idle ? */ +#define MCHIP_MCC_CMD_IIC_START_SET 0x1 +#define MCHIP_MCC_CMD_IIC_END_SET 0x2 +#define MCHIP_MCC_CMD_FM_WRITE 0x3 /* frame memory */ +#define MCHIP_MCC_CMD_FM_READ 0x4 +#define MCHIP_MCC_CMD_FM_STOP 0x5 +#define MCHIP_MCC_CMD_CAPTURE 0x6 +#define MCHIP_MCC_CMD_DISPLAY 0x7 +#define MCHIP_MCC_CMD_END_DISP 0x8 +#define MCHIP_MCC_CMD_STILL_COMP 0x9 +#define MCHIP_MCC_CMD_STILL_DECOMP 0xa +#define MCHIP_MCC_CMD_STILL_OUTPUT 0xb +#define MCHIP_MCC_CMD_CONT_OUTPUT 0xc +#define MCHIP_MCC_CMD_CONT_COMP 0xd +#define MCHIP_MCC_CMD_CONT_DECOMP 0xe +#define MCHIP_MCC_CMD_RESET 0xf /* MCC reset */ + +#define MCHIP_MCC_IIC_WR 0x84 + +#define MCHIP_MCC_MCC_WR 0x88 + +#define MCHIP_MCC_MCC_RD 0x8c + +#define MCHIP_MCC_STATUS 0x90 +#define MCHIP_MCC_STATUS_CAPT 0x00000001 /* capturing */ +#define MCHIP_MCC_STATUS_DISP 0x00000002 /* displaying */ +#define MCHIP_MCC_STATUS_COMP 0x00000004 /* compressing */ +#define MCHIP_MCC_STATUS_DECOMP 0x00000008 /* decompressing */ +#define MCHIP_MCC_STATUS_MCC_WR 0x00000010 /* register ready */ +#define MCHIP_MCC_STATUS_MCC_RD 0x00000020 /* register ready */ +#define MCHIP_MCC_STATUS_IIC_WR 0x00000040 /* register ready */ +#define MCHIP_MCC_STATUS_OUTPUT 0x00000080 /* output in prog */ + +#define MCHIP_MCC_SIG_POLARITY 0x94 +#define MCHIP_MCC_SIG_POL_VS_H 0x00000001 /* VS active-high */ +#define MCHIP_MCC_SIG_POL_HS_H 0x00000002 /* HS active-high */ +#define MCHIP_MCC_SIG_POL_DOE_H 0x00000004 /* DOE active-high */ + +#define MCHIP_MCC_IRQ 0x98 +#define MCHIP_MCC_IRQ_CAPDIS_STRT 0x00000001 /* cap/disp started */ +#define MCHIP_MCC_IRQ_CAPDIS_STRT_MASK 0x00000010 +#define MCHIP_MCC_IRQ_CAPDIS_END 0x00000002 /* cap/disp ended */ +#define MCHIP_MCC_IRQ_CAPDIS_END_MASK 0x00000020 +#define MCHIP_MCC_IRQ_COMPDEC_STRT 0x00000004 /* (de)comp started */ +#define MCHIP_MCC_IRQ_COMPDEC_STRT_MASK 0x00000040 +#define MCHIP_MCC_IRQ_COMPDEC_END 0x00000008 /* (de)comp ended */ +#define MCHIP_MCC_IRQ_COMPDEC_END_MASK 0x00000080 + +#define MCHIP_MCC_HSTART 0x9c /* video in */ +#define MCHIP_MCC_VSTART 0xa0 +#define MCHIP_MCC_HCOUNT 0xa4 +#define MCHIP_MCC_VCOUNT 0xa8 +#define MCHIP_MCC_R_XBASE 0xac /* capt/disp */ +#define MCHIP_MCC_R_YBASE 0xb0 +#define MCHIP_MCC_R_XRANGE 0xb4 +#define MCHIP_MCC_R_YRANGE 0xb8 +#define MCHIP_MCC_B_XBASE 0xbc /* comp/decomp */ +#define MCHIP_MCC_B_YBASE 0xc0 +#define MCHIP_MCC_B_XRANGE 0xc4 +#define MCHIP_MCC_B_YRANGE 0xc8 + +#define MCHIP_MCC_R_SAMPLING 0xcc /* 1: 1:4 */ + +#define MCHIP_VRJ_CMD 0x100 /* VRJ commands */ + +/* VRJ registers (see table 12.2.4) */ +#define MCHIP_VRJ_COMPRESSED_DATA 0x1b0 +#define MCHIP_VRJ_PIXEL_DATA 0x1b8 + +#define MCHIP_VRJ_BUS_MODE 0x100 +#define MCHIP_VRJ_SIGNAL_ACTIVE_LEVEL 0x108 +#define MCHIP_VRJ_PDAT_USE 0x110 +#define MCHIP_VRJ_MODE_SPECIFY 0x118 +#define MCHIP_VRJ_LIMIT_COMPRESSED_LO 0x120 +#define MCHIP_VRJ_LIMIT_COMPRESSED_HI 0x124 +#define MCHIP_VRJ_COMP_DATA_FORMAT 0x128 +#define MCHIP_VRJ_TABLE_DATA 0x140 +#define MCHIP_VRJ_RESTART_INTERVAL 0x148 +#define MCHIP_VRJ_NUM_LINES 0x150 +#define MCHIP_VRJ_NUM_PIXELS 0x158 +#define MCHIP_VRJ_NUM_COMPONENTS 0x160 +#define MCHIP_VRJ_SOF1 0x168 +#define MCHIP_VRJ_SOF2 0x170 +#define MCHIP_VRJ_SOF3 0x178 +#define MCHIP_VRJ_SOF4 0x180 +#define MCHIP_VRJ_SOS 0x188 +#define MCHIP_VRJ_SOFT_RESET 0x190 + +#define MCHIP_VRJ_STATUS 0x1c0 +#define MCHIP_VRJ_STATUS_BUSY 0x00001 +#define MCHIP_VRJ_STATUS_COMP_ACCESS 0x00002 +#define MCHIP_VRJ_STATUS_PIXEL_ACCESS 0x00004 +#define MCHIP_VRJ_STATUS_ERROR 0x00008 + +#define MCHIP_VRJ_IRQ_FLAG 0x1c8 +#define MCHIP_VRJ_ERROR_REPORT 0x1d8 + +#define MCHIP_VRJ_START_COMMAND 0x1a0 + +/****************************************************************************/ +/* Driver definitions. */ +/****************************************************************************/ + +/* Sony Programmable I/O Controller for accessing the camera commands */ +#include + +/* private API definitions */ +#include +#include + + +/* Enable jpg software correction */ +#define MEYE_JPEG_CORRECTION 1 + +/* Maximum size of a buffer */ +#define MEYE_MAX_BUFSIZE 614400 /* 640 * 480 * 2 */ + +/* Maximum number of buffers */ +#define MEYE_MAX_BUFNBRS 32 + +/* State of a buffer */ +#define MEYE_BUF_UNUSED 0 /* not used */ +#define MEYE_BUF_USING 1 /* currently grabbing / playing */ +#define MEYE_BUF_DONE 2 /* done */ + +/* grab buffer */ +struct meye_grab_buffer { + int state; /* state of buffer */ + unsigned long size; /* size of jpg frame */ + struct timeval timestamp; /* timestamp */ + unsigned long sequence; /* sequence number */ +}; + +/* size of kfifos containings buffer indices */ +#define MEYE_QUEUE_SIZE MEYE_MAX_BUFNBRS + +/* Motion Eye device structure */ +struct meye { + struct v4l2_device v4l2_dev; /* Main v4l2_device struct */ + struct v4l2_ctrl_handler hdl; + struct pci_dev *mchip_dev; /* pci device */ + u8 mchip_irq; /* irq */ + u8 mchip_mode; /* actual mchip mode: HIC_MODE... */ + u8 mchip_fnum; /* current mchip frame number */ + unsigned char __iomem *mchip_mmregs;/* mchip: memory mapped registers */ + u8 *mchip_ptable[MCHIP_NB_PAGES];/* mchip: ptable */ + void *mchip_ptable_toc; /* mchip: ptable toc */ + dma_addr_t mchip_dmahandle; /* mchip: dma handle to ptable toc */ + unsigned char *grab_fbuffer; /* capture framebuffer */ + unsigned char *grab_temp; /* temporary buffer */ + /* list of buffers */ + struct meye_grab_buffer grab_buffer[MEYE_MAX_BUFNBRS]; + int vma_use_count[MEYE_MAX_BUFNBRS]; /* mmap count */ + struct mutex lock; /* mutex for open/mmap... */ + struct kfifo grabq; /* queue for buffers to be grabbed */ + spinlock_t grabq_lock; /* lock protecting the queue */ + struct kfifo doneq; /* queue for grabbed buffers */ + spinlock_t doneq_lock; /* lock protecting the queue */ + wait_queue_head_t proc_list; /* wait queue */ + struct video_device *vdev; /* video device parameters */ + u16 brightness; + u16 hue; + u16 contrast; + u16 colour; + struct meye_params params; /* additional parameters */ + unsigned long in_use; /* set to 1 if the device is in use */ +#ifdef CONFIG_PM + u8 pm_mchip_mode; /* old mchip mode */ +#endif +}; + +#endif diff --git a/drivers/media/pci/ngene/Kconfig b/drivers/media/pci/ngene/Kconfig new file mode 100644 index 00000000..637d506b --- /dev/null +++ b/drivers/media/pci/ngene/Kconfig @@ -0,0 +1,13 @@ +config DVB_NGENE + tristate "Micronas nGene support" + depends on DVB_CORE && PCI && I2C + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + Support for Micronas PCI express cards with nGene bridge. + diff --git a/drivers/media/pci/ngene/Makefile b/drivers/media/pci/ngene/Makefile new file mode 100644 index 00000000..5c0b5d6b --- /dev/null +++ b/drivers/media/pci/ngene/Makefile @@ -0,0 +1,14 @@ +# +# Makefile for the nGene device driver +# + +ngene-objs := ngene-core.o ngene-i2c.o ngene-cards.o ngene-dvb.o + +obj-$(CONFIG_DVB_NGENE) += ngene.o + +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners/ + +# For the staging CI driver cxd2099 +ccflags-y += -Idrivers/staging/media/cxd2099/ diff --git a/drivers/media/pci/ngene/ngene-cards.c b/drivers/media/pci/ngene/ngene-cards.c new file mode 100644 index 00000000..9e82d210 --- /dev/null +++ b/drivers/media/pci/ngene/ngene-cards.c @@ -0,0 +1,834 @@ +/* + * ngene-cards.c: nGene PCIe bridge driver - card specific info + * + * Copyright (C) 2005-2007 Micronas + * + * Copyright (C) 2008-2009 Ralph Metzler + * Modifications for new nGene firmware, + * support for EEPROM-copying, + * support for new dual DVB-S2 card prototype + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include + +#include "ngene.h" + +/* demods/tuners */ +#include "stv6110x.h" +#include "stv090x.h" +#include "lnbh24.h" +#include "lgdt330x.h" +#include "mt2131.h" +#include "tda18271c2dd.h" +#include "drxk.h" +#include "drxd.h" +#include "dvb-pll.h" + + +/****************************************************************************/ +/* Demod/tuner attachment ***************************************************/ +/****************************************************************************/ + +static int tuner_attach_stv6110(struct ngene_channel *chan) +{ + struct i2c_adapter *i2c; + struct stv090x_config *feconf = (struct stv090x_config *) + chan->dev->card_info->fe_config[chan->number]; + struct stv6110x_config *tunerconf = (struct stv6110x_config *) + chan->dev->card_info->tuner_config[chan->number]; + struct stv6110x_devctl *ctl; + + /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */ + if (chan->number < 2) + i2c = &chan->dev->channel[0].i2c_adapter; + else + i2c = &chan->dev->channel[1].i2c_adapter; + + ctl = dvb_attach(stv6110x_attach, chan->fe, tunerconf, i2c); + if (ctl == NULL) { + printk(KERN_ERR DEVICE_NAME ": No STV6110X found!\n"); + return -ENODEV; + } + + feconf->tuner_init = ctl->tuner_init; + feconf->tuner_sleep = ctl->tuner_sleep; + feconf->tuner_set_mode = ctl->tuner_set_mode; + feconf->tuner_set_frequency = ctl->tuner_set_frequency; + feconf->tuner_get_frequency = ctl->tuner_get_frequency; + feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth; + feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth; + feconf->tuner_set_bbgain = ctl->tuner_set_bbgain; + feconf->tuner_get_bbgain = ctl->tuner_get_bbgain; + feconf->tuner_set_refclk = ctl->tuner_set_refclk; + feconf->tuner_get_status = ctl->tuner_get_status; + + return 0; +} + + +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct ngene_channel *chan = fe->sec_priv; + int status; + + if (enable) { + down(&chan->dev->pll_mutex); + status = chan->gate_ctrl(fe, 1); + } else { + status = chan->gate_ctrl(fe, 0); + up(&chan->dev->pll_mutex); + } + return status; +} + +static int tuner_attach_tda18271(struct ngene_channel *chan) +{ + struct i2c_adapter *i2c; + struct dvb_frontend *fe; + + i2c = &chan->dev->channel[0].i2c_adapter; + if (chan->fe->ops.i2c_gate_ctrl) + chan->fe->ops.i2c_gate_ctrl(chan->fe, 1); + fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60); + if (chan->fe->ops.i2c_gate_ctrl) + chan->fe->ops.i2c_gate_ctrl(chan->fe, 0); + if (!fe) { + printk(KERN_ERR "No TDA18271 found!\n"); + return -ENODEV; + } + + return 0; +} + +static int tuner_attach_probe(struct ngene_channel *chan) +{ + if (chan->demod_type == 0) + return tuner_attach_stv6110(chan); + if (chan->demod_type == 1) + return tuner_attach_tda18271(chan); + return -EINVAL; +} + +static int demod_attach_stv0900(struct ngene_channel *chan) +{ + struct i2c_adapter *i2c; + struct stv090x_config *feconf = (struct stv090x_config *) + chan->dev->card_info->fe_config[chan->number]; + + /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */ + /* Note: Both adapters share the same i2c bus, but the demod */ + /* driver requires that each demod has its own i2c adapter */ + if (chan->number < 2) + i2c = &chan->dev->channel[0].i2c_adapter; + else + i2c = &chan->dev->channel[1].i2c_adapter; + + chan->fe = dvb_attach(stv090x_attach, feconf, i2c, + (chan->number & 1) == 0 ? STV090x_DEMODULATOR_0 + : STV090x_DEMODULATOR_1); + if (chan->fe == NULL) { + printk(KERN_ERR DEVICE_NAME ": No STV0900 found!\n"); + return -ENODEV; + } + + /* store channel info */ + if (feconf->tuner_i2c_lock) + chan->fe->analog_demod_priv = chan; + + if (!dvb_attach(lnbh24_attach, chan->fe, i2c, 0, + 0, chan->dev->card_info->lnb[chan->number])) { + printk(KERN_ERR DEVICE_NAME ": No LNBH24 found!\n"); + dvb_frontend_detach(chan->fe); + chan->fe = NULL; + return -ENODEV; + } + + return 0; +} + +static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock) +{ + struct ngene_channel *chan = fe->analog_demod_priv; + + if (lock) + down(&chan->dev->pll_mutex); + else + up(&chan->dev->pll_mutex); +} + +static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val) +{ + struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1 } }; + return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1; +} + +static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr, + u16 reg, u8 *val) +{ + u8 msg[2] = {reg>>8, reg&0xff}; + struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, + .buf = msg, .len = 2}, + {.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1} }; + return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; +} + +static int port_has_stv0900(struct i2c_adapter *i2c, int port) +{ + u8 val; + if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0) + return 0; + return 1; +} + +static int port_has_drxk(struct i2c_adapter *i2c, int port) +{ + u8 val; + + if (i2c_read(i2c, 0x29+port, &val) < 0) + return 0; + return 1; +} + +static int demod_attach_drxk(struct ngene_channel *chan, + struct i2c_adapter *i2c) +{ + struct drxk_config config; + + memset(&config, 0, sizeof(config)); + config.microcode_name = "drxk_a3.mc"; + config.qam_demod_parameter_count = 4; + config.adr = 0x29 + (chan->number ^ 2); + + chan->fe = dvb_attach(drxk_attach, &config, i2c); + if (!chan->fe) { + printk(KERN_ERR "No DRXK found!\n"); + return -ENODEV; + } + chan->fe->sec_priv = chan; + chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl; + chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl; + return 0; +} + +static int cineS2_probe(struct ngene_channel *chan) +{ + struct i2c_adapter *i2c; + struct stv090x_config *fe_conf; + u8 buf[3]; + struct i2c_msg i2c_msg = { .flags = 0, .buf = buf }; + int rc; + + /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */ + if (chan->number < 2) + i2c = &chan->dev->channel[0].i2c_adapter; + else + i2c = &chan->dev->channel[1].i2c_adapter; + + if (port_has_stv0900(i2c, chan->number)) { + chan->demod_type = 0; + fe_conf = chan->dev->card_info->fe_config[chan->number]; + /* demod found, attach it */ + rc = demod_attach_stv0900(chan); + if (rc < 0 || chan->number < 2) + return rc; + + /* demod #2: reprogram outputs DPN1 & DPN2 */ + i2c_msg.addr = fe_conf->address; + i2c_msg.len = 3; + buf[0] = 0xf1; + switch (chan->number) { + case 2: + buf[1] = 0x5c; + buf[2] = 0xc2; + break; + case 3: + buf[1] = 0x61; + buf[2] = 0xcc; + break; + default: + return -ENODEV; + } + rc = i2c_transfer(i2c, &i2c_msg, 1); + if (rc != 1) { + printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n"); + return -EIO; + } + } else if (port_has_drxk(i2c, chan->number^2)) { + chan->demod_type = 1; + demod_attach_drxk(chan, i2c); + } else { + printk(KERN_ERR "No demod found on chan %d\n", chan->number); + return -ENODEV; + } + return 0; +} + + +static struct lgdt330x_config aver_m780 = { + .demod_address = 0xb2 >> 1, + .demod_chip = LGDT3303, + .serial_mpeg = 0x00, /* PARALLEL */ + .clock_polarity_flip = 1, +}; + +static struct mt2131_config m780_tunerconfig = { + 0xc0 >> 1 +}; + +/* A single func to attach the demo and tuner, rather than + * use two sep funcs like the current design mandates. + */ +static int demod_attach_lg330x(struct ngene_channel *chan) +{ + chan->fe = dvb_attach(lgdt330x_attach, &aver_m780, &chan->i2c_adapter); + if (chan->fe == NULL) { + printk(KERN_ERR DEVICE_NAME ": No LGDT330x found!\n"); + return -ENODEV; + } + + dvb_attach(mt2131_attach, chan->fe, &chan->i2c_adapter, + &m780_tunerconfig, 0); + + return (chan->fe) ? 0 : -ENODEV; +} + +static int demod_attach_drxd(struct ngene_channel *chan) +{ + struct drxd_config *feconf; + + feconf = chan->dev->card_info->fe_config[chan->number]; + + chan->fe = dvb_attach(drxd_attach, feconf, chan, + &chan->i2c_adapter, &chan->dev->pci_dev->dev); + if (!chan->fe) { + pr_err("No DRXD found!\n"); + return -ENODEV; + } + return 0; +} + +static int tuner_attach_dtt7520x(struct ngene_channel *chan) +{ + struct drxd_config *feconf; + + feconf = chan->dev->card_info->fe_config[chan->number]; + + if (!dvb_attach(dvb_pll_attach, chan->fe, feconf->pll_address, + &chan->i2c_adapter, + feconf->pll_type)) { + pr_err("No pll(%d) found!\n", feconf->pll_type); + return -ENODEV; + } + return 0; +} + +/****************************************************************************/ +/* EEPROM TAGS **************************************************************/ +/****************************************************************************/ + +#define MICNG_EE_START 0x0100 +#define MICNG_EE_END 0x0FF0 + +#define MICNG_EETAG_END0 0x0000 +#define MICNG_EETAG_END1 0xFFFF + +/* 0x0001 - 0x000F reserved for housekeeping */ +/* 0xFFFF - 0xFFFE reserved for housekeeping */ + +/* Micronas assigned tags + EEProm tags for hardware support */ + +#define MICNG_EETAG_DRXD1_OSCDEVIATION 0x1000 /* 2 Bytes data */ +#define MICNG_EETAG_DRXD2_OSCDEVIATION 0x1001 /* 2 Bytes data */ + +#define MICNG_EETAG_MT2060_1_1STIF 0x1100 /* 2 Bytes data */ +#define MICNG_EETAG_MT2060_2_1STIF 0x1101 /* 2 Bytes data */ + +/* Tag range for OEMs */ + +#define MICNG_EETAG_OEM_FIRST 0xC000 +#define MICNG_EETAG_OEM_LAST 0xFFEF + +static int i2c_write_eeprom(struct i2c_adapter *adapter, + u8 adr, u16 reg, u8 data) +{ + u8 m[3] = {(reg >> 8), (reg & 0xff), data}; + struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = m, + .len = sizeof(m)}; + + if (i2c_transfer(adapter, &msg, 1) != 1) { + pr_err(DEVICE_NAME ": Error writing EEPROM!\n"); + return -EIO; + } + return 0; +} + +static int i2c_read_eeprom(struct i2c_adapter *adapter, + u8 adr, u16 reg, u8 *data, int len) +{ + u8 msg[2] = {(reg >> 8), (reg & 0xff)}; + struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, + .buf = msg, .len = 2 }, + {.addr = adr, .flags = I2C_M_RD, + .buf = data, .len = len} }; + + if (i2c_transfer(adapter, msgs, 2) != 2) { + pr_err(DEVICE_NAME ": Error reading EEPROM\n"); + return -EIO; + } + return 0; +} + +static int ReadEEProm(struct i2c_adapter *adapter, + u16 Tag, u32 MaxLen, u8 *data, u32 *pLength) +{ + int status = 0; + u16 Addr = MICNG_EE_START, Length, tag = 0; + u8 EETag[3]; + + while (Addr + sizeof(u16) + 1 < MICNG_EE_END) { + if (i2c_read_eeprom(adapter, 0x50, Addr, EETag, sizeof(EETag))) + return -1; + tag = (EETag[0] << 8) | EETag[1]; + if (tag == MICNG_EETAG_END0 || tag == MICNG_EETAG_END1) + return -1; + if (tag == Tag) + break; + Addr += sizeof(u16) + 1 + EETag[2]; + } + if (Addr + sizeof(u16) + 1 + EETag[2] > MICNG_EE_END) { + pr_err(DEVICE_NAME + ": Reached EOEE @ Tag = %04x Length = %3d\n", + tag, EETag[2]); + return -1; + } + Length = EETag[2]; + if (Length > MaxLen) + Length = (u16) MaxLen; + if (Length > 0) { + Addr += sizeof(u16) + 1; + status = i2c_read_eeprom(adapter, 0x50, Addr, data, Length); + if (!status) { + *pLength = EETag[2]; +#if 0 + if (Length < EETag[2]) + status = STATUS_BUFFER_OVERFLOW; +#endif + } + } + return status; +} + +static int WriteEEProm(struct i2c_adapter *adapter, + u16 Tag, u32 Length, u8 *data) +{ + int status = 0; + u16 Addr = MICNG_EE_START; + u8 EETag[3]; + u16 tag = 0; + int retry, i; + + while (Addr + sizeof(u16) + 1 < MICNG_EE_END) { + if (i2c_read_eeprom(adapter, 0x50, Addr, EETag, sizeof(EETag))) + return -1; + tag = (EETag[0] << 8) | EETag[1]; + if (tag == MICNG_EETAG_END0 || tag == MICNG_EETAG_END1) + return -1; + if (tag == Tag) + break; + Addr += sizeof(u16) + 1 + EETag[2]; + } + if (Addr + sizeof(u16) + 1 + EETag[2] > MICNG_EE_END) { + pr_err(DEVICE_NAME + ": Reached EOEE @ Tag = %04x Length = %3d\n", + tag, EETag[2]); + return -1; + } + + if (Length > EETag[2]) + return -EINVAL; + /* Note: We write the data one byte at a time to avoid + issues with page sizes. (which are different for + each manufacture and eeprom size) + */ + Addr += sizeof(u16) + 1; + for (i = 0; i < Length; i++, Addr++) { + status = i2c_write_eeprom(adapter, 0x50, Addr, data[i]); + + if (status) + break; + + /* Poll for finishing write cycle */ + retry = 10; + while (retry) { + u8 Tmp; + + msleep(50); + status = i2c_read_eeprom(adapter, 0x50, Addr, &Tmp, 1); + if (status) + break; + if (Tmp != data[i]) + pr_err(DEVICE_NAME + "eeprom write error\n"); + retry -= 1; + } + if (status) { + pr_err(DEVICE_NAME + ": Timeout polling eeprom\n"); + break; + } + } + return status; +} + +static int eeprom_read_ushort(struct i2c_adapter *adapter, u16 tag, u16 *data) +{ + int stat; + u8 buf[2]; + u32 len = 0; + + stat = ReadEEProm(adapter, tag, 2, buf, &len); + if (stat) + return stat; + if (len != 2) + return -EINVAL; + + *data = (buf[0] << 8) | buf[1]; + return 0; +} + +static int eeprom_write_ushort(struct i2c_adapter *adapter, u16 tag, u16 data) +{ + int stat; + u8 buf[2]; + + buf[0] = data >> 8; + buf[1] = data & 0xff; + stat = WriteEEProm(adapter, tag, 2, buf); + if (stat) + return stat; + return 0; +} + +static s16 osc_deviation(void *priv, s16 deviation, int flag) +{ + struct ngene_channel *chan = priv; + struct i2c_adapter *adap = &chan->i2c_adapter; + u16 data = 0; + + if (flag) { + data = (u16) deviation; + pr_info(DEVICE_NAME ": write deviation %d\n", + deviation); + eeprom_write_ushort(adap, 0x1000 + chan->number, data); + } else { + if (eeprom_read_ushort(adap, 0x1000 + chan->number, &data)) + data = 0; + pr_info(DEVICE_NAME ": read deviation %d\n", + (s16) data); + } + + return (s16) data; +} + +/****************************************************************************/ +/* Switch control (I2C gates, etc.) *****************************************/ +/****************************************************************************/ + + +static struct stv090x_config fe_cineS2 = { + .device = STV0900, + .demod_mode = STV090x_DUAL, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 27000000, + .address = 0x68, + + .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + + .repeater_level = STV090x_RPTLEVEL_16, + + .adc1_range = STV090x_ADC_1Vpp, + .adc2_range = STV090x_ADC_1Vpp, + + .diseqc_envelope_mode = true, + + .tuner_i2c_lock = cineS2_tuner_i2c_lock, +}; + +static struct stv090x_config fe_cineS2_2 = { + .device = STV0900, + .demod_mode = STV090x_DUAL, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 27000000, + .address = 0x69, + + .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + + .repeater_level = STV090x_RPTLEVEL_16, + + .adc1_range = STV090x_ADC_1Vpp, + .adc2_range = STV090x_ADC_1Vpp, + + .diseqc_envelope_mode = true, + + .tuner_i2c_lock = cineS2_tuner_i2c_lock, +}; + +static struct stv6110x_config tuner_cineS2_0 = { + .addr = 0x60, + .refclk = 27000000, + .clk_div = 1, +}; + +static struct stv6110x_config tuner_cineS2_1 = { + .addr = 0x63, + .refclk = 27000000, + .clk_div = 1, +}; + +static struct ngene_info ngene_info_cineS2 = { + .type = NGENE_SIDEWINDER, + .name = "Linux4Media cineS2 DVB-S2 Twin Tuner", + .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN}, + .demod_attach = {demod_attach_stv0900, demod_attach_stv0900}, + .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110}, + .fe_config = {&fe_cineS2, &fe_cineS2}, + .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1}, + .lnb = {0x0b, 0x08}, + .tsf = {3, 3}, + .fw_version = 18, + .msi_supported = true, +}; + +static struct ngene_info ngene_info_satixS2 = { + .type = NGENE_SIDEWINDER, + .name = "Mystique SaTiX-S2 Dual", + .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN}, + .demod_attach = {demod_attach_stv0900, demod_attach_stv0900}, + .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110}, + .fe_config = {&fe_cineS2, &fe_cineS2}, + .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1}, + .lnb = {0x0b, 0x08}, + .tsf = {3, 3}, + .fw_version = 18, + .msi_supported = true, +}; + +static struct ngene_info ngene_info_satixS2v2 = { + .type = NGENE_SIDEWINDER, + .name = "Mystique SaTiX-S2 Dual (v2)", + .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, + NGENE_IO_TSOUT}, + .demod_attach = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe}, + .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe}, + .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, + .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, + .lnb = {0x0a, 0x08, 0x0b, 0x09}, + .tsf = {3, 3}, + .fw_version = 18, + .msi_supported = true, +}; + +static struct ngene_info ngene_info_cineS2v5 = { + .type = NGENE_SIDEWINDER, + .name = "Linux4Media cineS2 DVB-S2 Twin Tuner (v5)", + .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, + NGENE_IO_TSOUT}, + .demod_attach = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe}, + .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe}, + .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, + .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, + .lnb = {0x0a, 0x08, 0x0b, 0x09}, + .tsf = {3, 3}, + .fw_version = 18, + .msi_supported = true, +}; + + +static struct ngene_info ngene_info_duoFlex = { + .type = NGENE_SIDEWINDER, + .name = "Digital Devices DuoFlex PCIe or miniPCIe", + .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, + NGENE_IO_TSOUT}, + .demod_attach = {cineS2_probe, cineS2_probe, cineS2_probe, cineS2_probe}, + .tuner_attach = {tuner_attach_probe, tuner_attach_probe, tuner_attach_probe, tuner_attach_probe}, + .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, + .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, + .lnb = {0x0a, 0x08, 0x0b, 0x09}, + .tsf = {3, 3}, + .fw_version = 18, + .msi_supported = true, +}; + +static struct ngene_info ngene_info_m780 = { + .type = NGENE_APP, + .name = "Aver M780 ATSC/QAM-B", + + /* Channel 0 is analog, which is currently unsupported */ + .io_type = { NGENE_IO_NONE, NGENE_IO_TSIN }, + .demod_attach = { NULL, demod_attach_lg330x }, + + /* Ensure these are NULL else the frame will call them (as funcs) */ + .tuner_attach = { 0, 0, 0, 0 }, + .fe_config = { NULL, &aver_m780 }, + .avf = { 0 }, + + /* A custom electrical interface config for the demod to bridge */ + .tsf = { 4, 4 }, + .fw_version = 15, +}; + +static struct drxd_config fe_terratec_dvbt_0 = { + .index = 0, + .demod_address = 0x70, + .demod_revision = 0xa2, + .demoda_address = 0x00, + .pll_address = 0x60, + .pll_type = DVB_PLL_THOMSON_DTT7520X, + .clock = 20000, + .osc_deviation = osc_deviation, +}; + +static struct drxd_config fe_terratec_dvbt_1 = { + .index = 1, + .demod_address = 0x71, + .demod_revision = 0xa2, + .demoda_address = 0x00, + .pll_address = 0x60, + .pll_type = DVB_PLL_THOMSON_DTT7520X, + .clock = 20000, + .osc_deviation = osc_deviation, +}; + +static struct ngene_info ngene_info_terratec = { + .type = NGENE_TERRATEC, + .name = "Terratec Integra/Cinergy2400i Dual DVB-T", + .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN}, + .demod_attach = {demod_attach_drxd, demod_attach_drxd}, + .tuner_attach = {tuner_attach_dtt7520x, tuner_attach_dtt7520x}, + .fe_config = {&fe_terratec_dvbt_0, &fe_terratec_dvbt_1}, + .i2c_access = 1, +}; + +/****************************************************************************/ + + + +/****************************************************************************/ +/* PCI Subsystem ID *********************************************************/ +/****************************************************************************/ + +#define NGENE_ID(_subvend, _subdev, _driverdata) { \ + .vendor = NGENE_VID, .device = NGENE_PID, \ + .subvendor = _subvend, .subdevice = _subdev, \ + .driver_data = (unsigned long) &_driverdata } + +/****************************************************************************/ + +static const struct pci_device_id ngene_id_tbl[] = { + NGENE_ID(0x18c3, 0xabc3, ngene_info_cineS2), + NGENE_ID(0x18c3, 0xabc4, ngene_info_cineS2), + NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2), + NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2), + NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5), + NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex), + NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex), + NGENE_ID(0x1461, 0x062e, ngene_info_m780), + NGENE_ID(0x153b, 0x1167, ngene_info_terratec), + {0} +}; +MODULE_DEVICE_TABLE(pci, ngene_id_tbl); + +/****************************************************************************/ +/* Init/Exit ****************************************************************/ +/****************************************************************************/ + +static pci_ers_result_t ngene_error_detected(struct pci_dev *dev, + enum pci_channel_state state) +{ + printk(KERN_ERR DEVICE_NAME ": PCI error\n"); + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + if (state == pci_channel_io_frozen) + return PCI_ERS_RESULT_NEED_RESET; + return PCI_ERS_RESULT_CAN_RECOVER; +} + +static pci_ers_result_t ngene_link_reset(struct pci_dev *dev) +{ + printk(KERN_INFO DEVICE_NAME ": link reset\n"); + return 0; +} + +static pci_ers_result_t ngene_slot_reset(struct pci_dev *dev) +{ + printk(KERN_INFO DEVICE_NAME ": slot reset\n"); + return 0; +} + +static void ngene_resume(struct pci_dev *dev) +{ + printk(KERN_INFO DEVICE_NAME ": resume\n"); +} + +static const struct pci_error_handlers ngene_errors = { + .error_detected = ngene_error_detected, + .link_reset = ngene_link_reset, + .slot_reset = ngene_slot_reset, + .resume = ngene_resume, +}; + +static struct pci_driver ngene_pci_driver = { + .name = "ngene", + .id_table = ngene_id_tbl, + .probe = ngene_probe, + .remove = ngene_remove, + .err_handler = &ngene_errors, + .shutdown = ngene_shutdown, +}; + +static __init int module_init_ngene(void) +{ + printk(KERN_INFO + "nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas\n"); + return pci_register_driver(&ngene_pci_driver); +} + +static __exit void module_exit_ngene(void) +{ + pci_unregister_driver(&ngene_pci_driver); +} + +module_init(module_init_ngene); +module_exit(module_exit_ngene); + +MODULE_DESCRIPTION("nGene"); +MODULE_AUTHOR("Micronas, Ralph Metzler, Manfred Voelkel"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/ngene/ngene-core.c b/drivers/media/pci/ngene/ngene-core.c new file mode 100644 index 00000000..37ebc423 --- /dev/null +++ b/drivers/media/pci/ngene/ngene-core.c @@ -0,0 +1,1707 @@ +/* + * ngene.c: nGene PCIe bridge driver + * + * Copyright (C) 2005-2007 Micronas + * + * Copyright (C) 2008-2009 Ralph Metzler + * Modifications for new nGene firmware, + * support for EEPROM-copying, + * support for new dual DVB-S2 card prototype + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ngene.h" + +static int one_adapter; +module_param(one_adapter, int, 0444); +MODULE_PARM_DESC(one_adapter, "Use only one adapter."); + +static int shutdown_workaround; +module_param(shutdown_workaround, int, 0644); +MODULE_PARM_DESC(shutdown_workaround, "Activate workaround for shutdown problem with some chipsets."); + +static int debug; +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, "Print debugging information."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define dprintk if (debug) printk + +#define ngwriteb(dat, adr) writeb((dat), (char *)(dev->iomem + (adr))) +#define ngwritel(dat, adr) writel((dat), (char *)(dev->iomem + (adr))) +#define ngwriteb(dat, adr) writeb((dat), (char *)(dev->iomem + (adr))) +#define ngreadl(adr) readl(dev->iomem + (adr)) +#define ngreadb(adr) readb(dev->iomem + (adr)) +#define ngcpyto(adr, src, count) memcpy_toio((char *) \ + (dev->iomem + (adr)), (src), (count)) +#define ngcpyfrom(dst, adr, count) memcpy_fromio((dst), (char *) \ + (dev->iomem + (adr)), (count)) + +/****************************************************************************/ +/* nGene interrupt handler **************************************************/ +/****************************************************************************/ + +static void event_tasklet(unsigned long data) +{ + struct ngene *dev = (struct ngene *)data; + + while (dev->EventQueueReadIndex != dev->EventQueueWriteIndex) { + struct EVENT_BUFFER Event = + dev->EventQueue[dev->EventQueueReadIndex]; + dev->EventQueueReadIndex = + (dev->EventQueueReadIndex + 1) & (EVENT_QUEUE_SIZE - 1); + + if ((Event.UARTStatus & 0x01) && (dev->TxEventNotify)) + dev->TxEventNotify(dev, Event.TimeStamp); + if ((Event.UARTStatus & 0x02) && (dev->RxEventNotify)) + dev->RxEventNotify(dev, Event.TimeStamp, + Event.RXCharacter); + } +} + +static void demux_tasklet(unsigned long data) +{ + struct ngene_channel *chan = (struct ngene_channel *)data; + struct SBufferHeader *Cur = chan->nextBuffer; + + spin_lock_irq(&chan->state_lock); + + while (Cur->ngeneBuffer.SR.Flags & 0x80) { + if (chan->mode & NGENE_IO_TSOUT) { + u32 Flags = chan->DataFormatFlags; + if (Cur->ngeneBuffer.SR.Flags & 0x20) + Flags |= BEF_OVERFLOW; + if (chan->pBufferExchange) { + if (!chan->pBufferExchange(chan, + Cur->Buffer1, + chan->Capture1Length, + Cur->ngeneBuffer.SR. + Clock, Flags)) { + /* + We didn't get data + Clear in service flag to make sure we + get called on next interrupt again. + leave fill/empty (0x80) flag alone + to avoid hardware running out of + buffers during startup, we hold only + in run state ( the source may be late + delivering data ) + */ + + if (chan->HWState == HWSTATE_RUN) { + Cur->ngeneBuffer.SR.Flags &= + ~0x40; + break; + /* Stop processing stream */ + } + } else { + /* We got a valid buffer, + so switch to run state */ + chan->HWState = HWSTATE_RUN; + } + } else { + printk(KERN_ERR DEVICE_NAME ": OOPS\n"); + if (chan->HWState == HWSTATE_RUN) { + Cur->ngeneBuffer.SR.Flags &= ~0x40; + break; /* Stop processing stream */ + } + } + if (chan->AudioDTOUpdated) { + printk(KERN_INFO DEVICE_NAME + ": Update AudioDTO = %d\n", + chan->AudioDTOValue); + Cur->ngeneBuffer.SR.DTOUpdate = + chan->AudioDTOValue; + chan->AudioDTOUpdated = 0; + } + } else { + if (chan->HWState == HWSTATE_RUN) { + u32 Flags = chan->DataFormatFlags; + IBufferExchange *exch1 = chan->pBufferExchange; + IBufferExchange *exch2 = chan->pBufferExchange2; + if (Cur->ngeneBuffer.SR.Flags & 0x01) + Flags |= BEF_EVEN_FIELD; + if (Cur->ngeneBuffer.SR.Flags & 0x20) + Flags |= BEF_OVERFLOW; + spin_unlock_irq(&chan->state_lock); + if (exch1) + exch1(chan, Cur->Buffer1, + chan->Capture1Length, + Cur->ngeneBuffer.SR.Clock, + Flags); + if (exch2) + exch2(chan, Cur->Buffer2, + chan->Capture2Length, + Cur->ngeneBuffer.SR.Clock, + Flags); + spin_lock_irq(&chan->state_lock); + } else if (chan->HWState != HWSTATE_STOP) + chan->HWState = HWSTATE_RUN; + } + Cur->ngeneBuffer.SR.Flags = 0x00; + Cur = Cur->Next; + } + chan->nextBuffer = Cur; + + spin_unlock_irq(&chan->state_lock); +} + +static irqreturn_t irq_handler(int irq, void *dev_id) +{ + struct ngene *dev = (struct ngene *)dev_id; + u32 icounts = 0; + irqreturn_t rc = IRQ_NONE; + u32 i = MAX_STREAM; + u8 *tmpCmdDoneByte; + + if (dev->BootFirmware) { + icounts = ngreadl(NGENE_INT_COUNTS); + if (icounts != dev->icounts) { + ngwritel(0, FORCE_NMI); + dev->cmd_done = 1; + wake_up(&dev->cmd_wq); + dev->icounts = icounts; + rc = IRQ_HANDLED; + } + return rc; + } + + ngwritel(0, FORCE_NMI); + + spin_lock(&dev->cmd_lock); + tmpCmdDoneByte = dev->CmdDoneByte; + if (tmpCmdDoneByte && + (*tmpCmdDoneByte || + (dev->ngenetohost[0] == 1 && dev->ngenetohost[1] != 0))) { + dev->CmdDoneByte = NULL; + dev->cmd_done = 1; + wake_up(&dev->cmd_wq); + rc = IRQ_HANDLED; + } + spin_unlock(&dev->cmd_lock); + + if (dev->EventBuffer->EventStatus & 0x80) { + u8 nextWriteIndex = + (dev->EventQueueWriteIndex + 1) & + (EVENT_QUEUE_SIZE - 1); + if (nextWriteIndex != dev->EventQueueReadIndex) { + dev->EventQueue[dev->EventQueueWriteIndex] = + *(dev->EventBuffer); + dev->EventQueueWriteIndex = nextWriteIndex; + } else { + printk(KERN_ERR DEVICE_NAME ": event overflow\n"); + dev->EventQueueOverflowCount += 1; + dev->EventQueueOverflowFlag = 1; + } + dev->EventBuffer->EventStatus &= ~0x80; + tasklet_schedule(&dev->event_tasklet); + rc = IRQ_HANDLED; + } + + while (i > 0) { + i--; + spin_lock(&dev->channel[i].state_lock); + /* if (dev->channel[i].State>=KSSTATE_RUN) { */ + if (dev->channel[i].nextBuffer) { + if ((dev->channel[i].nextBuffer-> + ngeneBuffer.SR.Flags & 0xC0) == 0x80) { + dev->channel[i].nextBuffer-> + ngeneBuffer.SR.Flags |= 0x40; + tasklet_schedule( + &dev->channel[i].demux_tasklet); + rc = IRQ_HANDLED; + } + } + spin_unlock(&dev->channel[i].state_lock); + } + + /* Request might have been processed by a previous call. */ + return IRQ_HANDLED; +} + +/****************************************************************************/ +/* nGene command interface **************************************************/ +/****************************************************************************/ + +static void dump_command_io(struct ngene *dev) +{ + u8 buf[8], *b; + + ngcpyfrom(buf, HOST_TO_NGENE, 8); + printk(KERN_ERR "host_to_ngene (%04x): %*ph\n", HOST_TO_NGENE, 8, buf); + + ngcpyfrom(buf, NGENE_TO_HOST, 8); + printk(KERN_ERR "ngene_to_host (%04x): %*ph\n", NGENE_TO_HOST, 8, buf); + + b = dev->hosttongene; + printk(KERN_ERR "dev->hosttongene (%p): %*ph\n", b, 8, b); + + b = dev->ngenetohost; + printk(KERN_ERR "dev->ngenetohost (%p): %*ph\n", b, 8, b); +} + +static int ngene_command_mutex(struct ngene *dev, struct ngene_command *com) +{ + int ret; + u8 *tmpCmdDoneByte; + + dev->cmd_done = 0; + + if (com->cmd.hdr.Opcode == CMD_FWLOAD_PREPARE) { + dev->BootFirmware = 1; + dev->icounts = ngreadl(NGENE_INT_COUNTS); + ngwritel(0, NGENE_COMMAND); + ngwritel(0, NGENE_COMMAND_HI); + ngwritel(0, NGENE_STATUS); + ngwritel(0, NGENE_STATUS_HI); + ngwritel(0, NGENE_EVENT); + ngwritel(0, NGENE_EVENT_HI); + } else if (com->cmd.hdr.Opcode == CMD_FWLOAD_FINISH) { + u64 fwio = dev->PAFWInterfaceBuffer; + + ngwritel(fwio & 0xffffffff, NGENE_COMMAND); + ngwritel(fwio >> 32, NGENE_COMMAND_HI); + ngwritel((fwio + 256) & 0xffffffff, NGENE_STATUS); + ngwritel((fwio + 256) >> 32, NGENE_STATUS_HI); + ngwritel((fwio + 512) & 0xffffffff, NGENE_EVENT); + ngwritel((fwio + 512) >> 32, NGENE_EVENT_HI); + } + + memcpy(dev->FWInterfaceBuffer, com->cmd.raw8, com->in_len + 2); + + if (dev->BootFirmware) + ngcpyto(HOST_TO_NGENE, com->cmd.raw8, com->in_len + 2); + + spin_lock_irq(&dev->cmd_lock); + tmpCmdDoneByte = dev->ngenetohost + com->out_len; + if (!com->out_len) + tmpCmdDoneByte++; + *tmpCmdDoneByte = 0; + dev->ngenetohost[0] = 0; + dev->ngenetohost[1] = 0; + dev->CmdDoneByte = tmpCmdDoneByte; + spin_unlock_irq(&dev->cmd_lock); + + /* Notify 8051. */ + ngwritel(1, FORCE_INT); + + ret = wait_event_timeout(dev->cmd_wq, dev->cmd_done == 1, 2 * HZ); + if (!ret) { + /*ngwritel(0, FORCE_NMI);*/ + + printk(KERN_ERR DEVICE_NAME + ": Command timeout cmd=%02x prev=%02x\n", + com->cmd.hdr.Opcode, dev->prev_cmd); + dump_command_io(dev); + return -1; + } + if (com->cmd.hdr.Opcode == CMD_FWLOAD_FINISH) + dev->BootFirmware = 0; + + dev->prev_cmd = com->cmd.hdr.Opcode; + + if (!com->out_len) + return 0; + + memcpy(com->cmd.raw8, dev->ngenetohost, com->out_len); + + return 0; +} + +int ngene_command(struct ngene *dev, struct ngene_command *com) +{ + int result; + + down(&dev->cmd_mutex); + result = ngene_command_mutex(dev, com); + up(&dev->cmd_mutex); + return result; +} + + +static int ngene_command_load_firmware(struct ngene *dev, + u8 *ngene_fw, u32 size) +{ +#define FIRSTCHUNK (1024) + u32 cleft; + struct ngene_command com; + + com.cmd.hdr.Opcode = CMD_FWLOAD_PREPARE; + com.cmd.hdr.Length = 0; + com.in_len = 0; + com.out_len = 0; + + ngene_command(dev, &com); + + cleft = (size + 3) & ~3; + if (cleft > FIRSTCHUNK) { + ngcpyto(PROGRAM_SRAM + FIRSTCHUNK, ngene_fw + FIRSTCHUNK, + cleft - FIRSTCHUNK); + cleft = FIRSTCHUNK; + } + ngcpyto(DATA_FIFO_AREA, ngene_fw, cleft); + + memset(&com, 0, sizeof(struct ngene_command)); + com.cmd.hdr.Opcode = CMD_FWLOAD_FINISH; + com.cmd.hdr.Length = 4; + com.cmd.FWLoadFinish.Address = DATA_FIFO_AREA; + com.cmd.FWLoadFinish.Length = (unsigned short)cleft; + com.in_len = 4; + com.out_len = 0; + + return ngene_command(dev, &com); +} + + +static int ngene_command_config_buf(struct ngene *dev, u8 config) +{ + struct ngene_command com; + + com.cmd.hdr.Opcode = CMD_CONFIGURE_BUFFER; + com.cmd.hdr.Length = 1; + com.cmd.ConfigureBuffers.config = config; + com.in_len = 1; + com.out_len = 0; + + if (ngene_command(dev, &com) < 0) + return -EIO; + return 0; +} + +static int ngene_command_config_free_buf(struct ngene *dev, u8 *config) +{ + struct ngene_command com; + + com.cmd.hdr.Opcode = CMD_CONFIGURE_FREE_BUFFER; + com.cmd.hdr.Length = 6; + memcpy(&com.cmd.ConfigureBuffers.config, config, 6); + com.in_len = 6; + com.out_len = 0; + + if (ngene_command(dev, &com) < 0) + return -EIO; + + return 0; +} + +int ngene_command_gpio_set(struct ngene *dev, u8 select, u8 level) +{ + struct ngene_command com; + + com.cmd.hdr.Opcode = CMD_SET_GPIO_PIN; + com.cmd.hdr.Length = 1; + com.cmd.SetGpioPin.select = select | (level << 7); + com.in_len = 1; + com.out_len = 0; + + return ngene_command(dev, &com); +} + + +/* + 02000640 is sample on rising edge. + 02000740 is sample on falling edge. + 02000040 is ignore "valid" signal + + 0: FD_CTL1 Bit 7,6 must be 0,1 + 7 disable(fw controlled) + 6 0-AUX,1-TS + 5 0-par,1-ser + 4 0-lsb/1-msb + 3,2 reserved + 1,0 0-no sync, 1-use ext. start, 2-use 0x47, 3-both + 1: FD_CTL2 has 3-valid must be hi, 2-use valid, 1-edge + 2: FD_STA is read-only. 0-sync + 3: FD_INSYNC is number of 47s to trigger "in sync". + 4: FD_OUTSYNC is number of 47s to trigger "out of sync". + 5: FD_MAXBYTE1 is low-order of bytes per packet. + 6: FD_MAXBYTE2 is high-order of bytes per packet. + 7: Top byte is unused. +*/ + +/****************************************************************************/ + +static u8 TSFeatureDecoderSetup[8 * 5] = { + 0x42, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, + 0x40, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* DRXH */ + 0x71, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* DRXHser */ + 0x72, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* S2ser */ + 0x40, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* LGDT3303 */ +}; + +/* Set NGENE I2S Config to 16 bit packed */ +static u8 I2SConfiguration[] = { + 0x00, 0x10, 0x00, 0x00, + 0x80, 0x10, 0x00, 0x00, +}; + +static u8 SPDIFConfiguration[10] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +/* Set NGENE I2S Config to transport stream compatible mode */ + +static u8 TS_I2SConfiguration[4] = { 0x3E, 0x18, 0x00, 0x00 }; + +static u8 TS_I2SOutConfiguration[4] = { 0x80, 0x04, 0x00, 0x00 }; + +static u8 ITUDecoderSetup[4][16] = { + {0x1c, 0x13, 0x01, 0x68, 0x3d, 0x90, 0x14, 0x20, /* SDTV */ + 0x00, 0x00, 0x01, 0xb0, 0x9c, 0x00, 0x00, 0x00}, + {0x9c, 0x03, 0x23, 0xC0, 0x60, 0x0E, 0x13, 0x00, + 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00}, + {0x9f, 0x00, 0x23, 0xC0, 0x60, 0x0F, 0x13, 0x00, /* HDTV 1080i50 */ + 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00}, + {0x9c, 0x01, 0x23, 0xC0, 0x60, 0x0E, 0x13, 0x00, /* HDTV 1080i60 */ + 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00}, +}; + +/* + * 50 48 60 gleich + * 27p50 9f 00 22 80 42 69 18 ... + * 27p60 93 00 22 80 82 69 1c ... + */ + +/* Maxbyte to 1144 (for raw data) */ +static u8 ITUFeatureDecoderSetup[8] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x04, 0x00 +}; + +void FillTSBuffer(void *Buffer, int Length, u32 Flags) +{ + u32 *ptr = Buffer; + + memset(Buffer, TS_FILLER, Length); + while (Length > 0) { + if (Flags & DF_SWAP32) + *ptr = 0x471FFF10; + else + *ptr = 0x10FF1F47; + ptr += (188 / 4); + Length -= 188; + } +} + + +static void flush_buffers(struct ngene_channel *chan) +{ + u8 val; + + do { + msleep(1); + spin_lock_irq(&chan->state_lock); + val = chan->nextBuffer->ngeneBuffer.SR.Flags & 0x80; + spin_unlock_irq(&chan->state_lock); + } while (val); +} + +static void clear_buffers(struct ngene_channel *chan) +{ + struct SBufferHeader *Cur = chan->nextBuffer; + + do { + memset(&Cur->ngeneBuffer.SR, 0, sizeof(Cur->ngeneBuffer.SR)); + if (chan->mode & NGENE_IO_TSOUT) + FillTSBuffer(Cur->Buffer1, + chan->Capture1Length, + chan->DataFormatFlags); + Cur = Cur->Next; + } while (Cur != chan->nextBuffer); + + if (chan->mode & NGENE_IO_TSOUT) { + chan->nextBuffer->ngeneBuffer.SR.DTOUpdate = + chan->AudioDTOValue; + chan->AudioDTOUpdated = 0; + + Cur = chan->TSIdleBuffer.Head; + + do { + memset(&Cur->ngeneBuffer.SR, 0, + sizeof(Cur->ngeneBuffer.SR)); + FillTSBuffer(Cur->Buffer1, + chan->Capture1Length, + chan->DataFormatFlags); + Cur = Cur->Next; + } while (Cur != chan->TSIdleBuffer.Head); + } +} + +static int ngene_command_stream_control(struct ngene *dev, u8 stream, + u8 control, u8 mode, u8 flags) +{ + struct ngene_channel *chan = &dev->channel[stream]; + struct ngene_command com; + u16 BsUVI = ((stream & 1) ? 0x9400 : 0x9300); + u16 BsSDI = ((stream & 1) ? 0x9600 : 0x9500); + u16 BsSPI = ((stream & 1) ? 0x9800 : 0x9700); + u16 BsSDO = 0x9B00; + + down(&dev->stream_mutex); + memset(&com, 0, sizeof(com)); + com.cmd.hdr.Opcode = CMD_CONTROL; + com.cmd.hdr.Length = sizeof(struct FW_STREAM_CONTROL) - 2; + com.cmd.StreamControl.Stream = stream | (control ? 8 : 0); + if (chan->mode & NGENE_IO_TSOUT) + com.cmd.StreamControl.Stream |= 0x07; + com.cmd.StreamControl.Control = control | + (flags & SFLAG_ORDER_LUMA_CHROMA); + com.cmd.StreamControl.Mode = mode; + com.in_len = sizeof(struct FW_STREAM_CONTROL); + com.out_len = 0; + + dprintk(KERN_INFO DEVICE_NAME + ": Stream=%02x, Control=%02x, Mode=%02x\n", + com.cmd.StreamControl.Stream, com.cmd.StreamControl.Control, + com.cmd.StreamControl.Mode); + + chan->Mode = mode; + + if (!(control & 0x80)) { + spin_lock_irq(&chan->state_lock); + if (chan->State == KSSTATE_RUN) { + chan->State = KSSTATE_ACQUIRE; + chan->HWState = HWSTATE_STOP; + spin_unlock_irq(&chan->state_lock); + if (ngene_command(dev, &com) < 0) { + up(&dev->stream_mutex); + return -1; + } + /* clear_buffers(chan); */ + flush_buffers(chan); + up(&dev->stream_mutex); + return 0; + } + spin_unlock_irq(&chan->state_lock); + up(&dev->stream_mutex); + return 0; + } + + if (mode & SMODE_AUDIO_CAPTURE) { + com.cmd.StreamControl.CaptureBlockCount = + chan->Capture1Length / AUDIO_BLOCK_SIZE; + com.cmd.StreamControl.Buffer_Address = chan->RingBuffer.PAHead; + } else if (mode & SMODE_TRANSPORT_STREAM) { + com.cmd.StreamControl.CaptureBlockCount = + chan->Capture1Length / TS_BLOCK_SIZE; + com.cmd.StreamControl.MaxLinesPerField = + chan->Capture1Length / TS_BLOCK_SIZE; + com.cmd.StreamControl.Buffer_Address = + chan->TSRingBuffer.PAHead; + if (chan->mode & NGENE_IO_TSOUT) { + com.cmd.StreamControl.BytesPerVBILine = + chan->Capture1Length / TS_BLOCK_SIZE; + com.cmd.StreamControl.Stream |= 0x07; + } + } else { + com.cmd.StreamControl.BytesPerVideoLine = chan->nBytesPerLine; + com.cmd.StreamControl.MaxLinesPerField = chan->nLines; + com.cmd.StreamControl.MinLinesPerField = 100; + com.cmd.StreamControl.Buffer_Address = chan->RingBuffer.PAHead; + + if (mode & SMODE_VBI_CAPTURE) { + com.cmd.StreamControl.MaxVBILinesPerField = + chan->nVBILines; + com.cmd.StreamControl.MinVBILinesPerField = 0; + com.cmd.StreamControl.BytesPerVBILine = + chan->nBytesPerVBILine; + } + if (flags & SFLAG_COLORBAR) + com.cmd.StreamControl.Stream |= 0x04; + } + + spin_lock_irq(&chan->state_lock); + if (mode & SMODE_AUDIO_CAPTURE) { + chan->nextBuffer = chan->RingBuffer.Head; + if (mode & SMODE_AUDIO_SPDIF) { + com.cmd.StreamControl.SetupDataLen = + sizeof(SPDIFConfiguration); + com.cmd.StreamControl.SetupDataAddr = BsSPI; + memcpy(com.cmd.StreamControl.SetupData, + SPDIFConfiguration, sizeof(SPDIFConfiguration)); + } else { + com.cmd.StreamControl.SetupDataLen = 4; + com.cmd.StreamControl.SetupDataAddr = BsSDI; + memcpy(com.cmd.StreamControl.SetupData, + I2SConfiguration + + 4 * dev->card_info->i2s[stream], 4); + } + } else if (mode & SMODE_TRANSPORT_STREAM) { + chan->nextBuffer = chan->TSRingBuffer.Head; + if (stream >= STREAM_AUDIOIN1) { + if (chan->mode & NGENE_IO_TSOUT) { + com.cmd.StreamControl.SetupDataLen = + sizeof(TS_I2SOutConfiguration); + com.cmd.StreamControl.SetupDataAddr = BsSDO; + memcpy(com.cmd.StreamControl.SetupData, + TS_I2SOutConfiguration, + sizeof(TS_I2SOutConfiguration)); + } else { + com.cmd.StreamControl.SetupDataLen = + sizeof(TS_I2SConfiguration); + com.cmd.StreamControl.SetupDataAddr = BsSDI; + memcpy(com.cmd.StreamControl.SetupData, + TS_I2SConfiguration, + sizeof(TS_I2SConfiguration)); + } + } else { + com.cmd.StreamControl.SetupDataLen = 8; + com.cmd.StreamControl.SetupDataAddr = BsUVI + 0x10; + memcpy(com.cmd.StreamControl.SetupData, + TSFeatureDecoderSetup + + 8 * dev->card_info->tsf[stream], 8); + } + } else { + chan->nextBuffer = chan->RingBuffer.Head; + com.cmd.StreamControl.SetupDataLen = + 16 + sizeof(ITUFeatureDecoderSetup); + com.cmd.StreamControl.SetupDataAddr = BsUVI; + memcpy(com.cmd.StreamControl.SetupData, + ITUDecoderSetup[chan->itumode], 16); + memcpy(com.cmd.StreamControl.SetupData + 16, + ITUFeatureDecoderSetup, sizeof(ITUFeatureDecoderSetup)); + } + clear_buffers(chan); + chan->State = KSSTATE_RUN; + if (mode & SMODE_TRANSPORT_STREAM) + chan->HWState = HWSTATE_RUN; + else + chan->HWState = HWSTATE_STARTUP; + spin_unlock_irq(&chan->state_lock); + + if (ngene_command(dev, &com) < 0) { + up(&dev->stream_mutex); + return -1; + } + up(&dev->stream_mutex); + return 0; +} + +void set_transfer(struct ngene_channel *chan, int state) +{ + u8 control = 0, mode = 0, flags = 0; + struct ngene *dev = chan->dev; + int ret; + + /* + printk(KERN_INFO DEVICE_NAME ": st %d\n", state); + msleep(100); + */ + + if (state) { + if (chan->running) { + printk(KERN_INFO DEVICE_NAME ": already running\n"); + return; + } + } else { + if (!chan->running) { + printk(KERN_INFO DEVICE_NAME ": already stopped\n"); + return; + } + } + + if (dev->card_info->switch_ctrl) + dev->card_info->switch_ctrl(chan, 1, state ^ 1); + + if (state) { + spin_lock_irq(&chan->state_lock); + + /* printk(KERN_INFO DEVICE_NAME ": lock=%08x\n", + ngreadl(0x9310)); */ + dvb_ringbuffer_flush(&dev->tsout_rbuf); + control = 0x80; + if (chan->mode & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) { + chan->Capture1Length = 512 * 188; + mode = SMODE_TRANSPORT_STREAM; + } + if (chan->mode & NGENE_IO_TSOUT) { + chan->pBufferExchange = tsout_exchange; + /* 0x66666666 = 50MHz *2^33 /250MHz */ + chan->AudioDTOValue = 0x80000000; + chan->AudioDTOUpdated = 1; + } + if (chan->mode & NGENE_IO_TSIN) + chan->pBufferExchange = tsin_exchange; + spin_unlock_irq(&chan->state_lock); + } + /* else printk(KERN_INFO DEVICE_NAME ": lock=%08x\n", + ngreadl(0x9310)); */ + + ret = ngene_command_stream_control(dev, chan->number, + control, mode, flags); + if (!ret) + chan->running = state; + else + printk(KERN_ERR DEVICE_NAME ": set_transfer %d failed\n", + state); + if (!state) { + spin_lock_irq(&chan->state_lock); + chan->pBufferExchange = NULL; + dvb_ringbuffer_flush(&dev->tsout_rbuf); + spin_unlock_irq(&chan->state_lock); + } +} + + +/****************************************************************************/ +/* nGene hardware init and release functions ********************************/ +/****************************************************************************/ + +static void free_ringbuffer(struct ngene *dev, struct SRingBufferDescriptor *rb) +{ + struct SBufferHeader *Cur = rb->Head; + u32 j; + + if (!Cur) + return; + + for (j = 0; j < rb->NumBuffers; j++, Cur = Cur->Next) { + if (Cur->Buffer1) + pci_free_consistent(dev->pci_dev, + rb->Buffer1Length, + Cur->Buffer1, + Cur->scList1->Address); + + if (Cur->Buffer2) + pci_free_consistent(dev->pci_dev, + rb->Buffer2Length, + Cur->Buffer2, + Cur->scList2->Address); + } + + if (rb->SCListMem) + pci_free_consistent(dev->pci_dev, rb->SCListMemSize, + rb->SCListMem, rb->PASCListMem); + + pci_free_consistent(dev->pci_dev, rb->MemSize, rb->Head, rb->PAHead); +} + +static void free_idlebuffer(struct ngene *dev, + struct SRingBufferDescriptor *rb, + struct SRingBufferDescriptor *tb) +{ + int j; + struct SBufferHeader *Cur = tb->Head; + + if (!rb->Head) + return; + free_ringbuffer(dev, rb); + for (j = 0; j < tb->NumBuffers; j++, Cur = Cur->Next) { + Cur->Buffer2 = NULL; + Cur->scList2 = NULL; + Cur->ngeneBuffer.Address_of_first_entry_2 = 0; + Cur->ngeneBuffer.Number_of_entries_2 = 0; + } +} + +static void free_common_buffers(struct ngene *dev) +{ + u32 i; + struct ngene_channel *chan; + + for (i = STREAM_VIDEOIN1; i < MAX_STREAM; i++) { + chan = &dev->channel[i]; + free_idlebuffer(dev, &chan->TSIdleBuffer, &chan->TSRingBuffer); + free_ringbuffer(dev, &chan->RingBuffer); + free_ringbuffer(dev, &chan->TSRingBuffer); + } + + if (dev->OverflowBuffer) + pci_free_consistent(dev->pci_dev, + OVERFLOW_BUFFER_SIZE, + dev->OverflowBuffer, dev->PAOverflowBuffer); + + if (dev->FWInterfaceBuffer) + pci_free_consistent(dev->pci_dev, + 4096, + dev->FWInterfaceBuffer, + dev->PAFWInterfaceBuffer); +} + +/****************************************************************************/ +/* Ring buffer handling *****************************************************/ +/****************************************************************************/ + +static int create_ring_buffer(struct pci_dev *pci_dev, + struct SRingBufferDescriptor *descr, u32 NumBuffers) +{ + dma_addr_t tmp; + struct SBufferHeader *Head; + u32 i; + u32 MemSize = SIZEOF_SBufferHeader * NumBuffers; + u64 PARingBufferHead; + u64 PARingBufferCur; + u64 PARingBufferNext; + struct SBufferHeader *Cur, *Next; + + descr->Head = NULL; + descr->MemSize = 0; + descr->PAHead = 0; + descr->NumBuffers = 0; + + if (MemSize < 4096) + MemSize = 4096; + + Head = pci_alloc_consistent(pci_dev, MemSize, &tmp); + PARingBufferHead = tmp; + + if (!Head) + return -ENOMEM; + + memset(Head, 0, MemSize); + + PARingBufferCur = PARingBufferHead; + Cur = Head; + + for (i = 0; i < NumBuffers - 1; i++) { + Next = (struct SBufferHeader *) + (((u8 *) Cur) + SIZEOF_SBufferHeader); + PARingBufferNext = PARingBufferCur + SIZEOF_SBufferHeader; + Cur->Next = Next; + Cur->ngeneBuffer.Next = PARingBufferNext; + Cur = Next; + PARingBufferCur = PARingBufferNext; + } + /* Last Buffer points back to first one */ + Cur->Next = Head; + Cur->ngeneBuffer.Next = PARingBufferHead; + + descr->Head = Head; + descr->MemSize = MemSize; + descr->PAHead = PARingBufferHead; + descr->NumBuffers = NumBuffers; + + return 0; +} + +static int AllocateRingBuffers(struct pci_dev *pci_dev, + dma_addr_t of, + struct SRingBufferDescriptor *pRingBuffer, + u32 Buffer1Length, u32 Buffer2Length) +{ + dma_addr_t tmp; + u32 i, j; + int status = 0; + u32 SCListMemSize = pRingBuffer->NumBuffers + * ((Buffer2Length != 0) ? (NUM_SCATTER_GATHER_ENTRIES * 2) : + NUM_SCATTER_GATHER_ENTRIES) + * sizeof(struct HW_SCATTER_GATHER_ELEMENT); + + u64 PASCListMem; + struct HW_SCATTER_GATHER_ELEMENT *SCListEntry; + u64 PASCListEntry; + struct SBufferHeader *Cur; + void *SCListMem; + + if (SCListMemSize < 4096) + SCListMemSize = 4096; + + SCListMem = pci_alloc_consistent(pci_dev, SCListMemSize, &tmp); + + PASCListMem = tmp; + if (SCListMem == NULL) + return -ENOMEM; + + memset(SCListMem, 0, SCListMemSize); + + pRingBuffer->SCListMem = SCListMem; + pRingBuffer->PASCListMem = PASCListMem; + pRingBuffer->SCListMemSize = SCListMemSize; + pRingBuffer->Buffer1Length = Buffer1Length; + pRingBuffer->Buffer2Length = Buffer2Length; + + SCListEntry = SCListMem; + PASCListEntry = PASCListMem; + Cur = pRingBuffer->Head; + + for (i = 0; i < pRingBuffer->NumBuffers; i += 1, Cur = Cur->Next) { + u64 PABuffer; + + void *Buffer = pci_alloc_consistent(pci_dev, Buffer1Length, + &tmp); + PABuffer = tmp; + + if (Buffer == NULL) + return -ENOMEM; + + Cur->Buffer1 = Buffer; + + SCListEntry->Address = PABuffer; + SCListEntry->Length = Buffer1Length; + + Cur->scList1 = SCListEntry; + Cur->ngeneBuffer.Address_of_first_entry_1 = PASCListEntry; + Cur->ngeneBuffer.Number_of_entries_1 = + NUM_SCATTER_GATHER_ENTRIES; + + SCListEntry += 1; + PASCListEntry += sizeof(struct HW_SCATTER_GATHER_ELEMENT); + +#if NUM_SCATTER_GATHER_ENTRIES > 1 + for (j = 0; j < NUM_SCATTER_GATHER_ENTRIES - 1; j += 1) { + SCListEntry->Address = of; + SCListEntry->Length = OVERFLOW_BUFFER_SIZE; + SCListEntry += 1; + PASCListEntry += + sizeof(struct HW_SCATTER_GATHER_ELEMENT); + } +#endif + + if (!Buffer2Length) + continue; + + Buffer = pci_alloc_consistent(pci_dev, Buffer2Length, &tmp); + PABuffer = tmp; + + if (Buffer == NULL) + return -ENOMEM; + + Cur->Buffer2 = Buffer; + + SCListEntry->Address = PABuffer; + SCListEntry->Length = Buffer2Length; + + Cur->scList2 = SCListEntry; + Cur->ngeneBuffer.Address_of_first_entry_2 = PASCListEntry; + Cur->ngeneBuffer.Number_of_entries_2 = + NUM_SCATTER_GATHER_ENTRIES; + + SCListEntry += 1; + PASCListEntry += sizeof(struct HW_SCATTER_GATHER_ELEMENT); + +#if NUM_SCATTER_GATHER_ENTRIES > 1 + for (j = 0; j < NUM_SCATTER_GATHER_ENTRIES - 1; j++) { + SCListEntry->Address = of; + SCListEntry->Length = OVERFLOW_BUFFER_SIZE; + SCListEntry += 1; + PASCListEntry += + sizeof(struct HW_SCATTER_GATHER_ELEMENT); + } +#endif + + } + + return status; +} + +static int FillTSIdleBuffer(struct SRingBufferDescriptor *pIdleBuffer, + struct SRingBufferDescriptor *pRingBuffer) +{ + int status = 0; + + /* Copy pointer to scatter gather list in TSRingbuffer + structure for buffer 2 + Load number of buffer + */ + u32 n = pRingBuffer->NumBuffers; + + /* Point to first buffer entry */ + struct SBufferHeader *Cur = pRingBuffer->Head; + int i; + /* Loop thru all buffer and set Buffer 2 pointers to TSIdlebuffer */ + for (i = 0; i < n; i++) { + Cur->Buffer2 = pIdleBuffer->Head->Buffer1; + Cur->scList2 = pIdleBuffer->Head->scList1; + Cur->ngeneBuffer.Address_of_first_entry_2 = + pIdleBuffer->Head->ngeneBuffer. + Address_of_first_entry_1; + Cur->ngeneBuffer.Number_of_entries_2 = + pIdleBuffer->Head->ngeneBuffer.Number_of_entries_1; + Cur = Cur->Next; + } + return status; +} + +static u32 RingBufferSizes[MAX_STREAM] = { + RING_SIZE_VIDEO, + RING_SIZE_VIDEO, + RING_SIZE_AUDIO, + RING_SIZE_AUDIO, + RING_SIZE_AUDIO, +}; + +static u32 Buffer1Sizes[MAX_STREAM] = { + MAX_VIDEO_BUFFER_SIZE, + MAX_VIDEO_BUFFER_SIZE, + MAX_AUDIO_BUFFER_SIZE, + MAX_AUDIO_BUFFER_SIZE, + MAX_AUDIO_BUFFER_SIZE +}; + +static u32 Buffer2Sizes[MAX_STREAM] = { + MAX_VBI_BUFFER_SIZE, + MAX_VBI_BUFFER_SIZE, + 0, + 0, + 0 +}; + + +static int AllocCommonBuffers(struct ngene *dev) +{ + int status = 0, i; + + dev->FWInterfaceBuffer = pci_alloc_consistent(dev->pci_dev, 4096, + &dev->PAFWInterfaceBuffer); + if (!dev->FWInterfaceBuffer) + return -ENOMEM; + dev->hosttongene = dev->FWInterfaceBuffer; + dev->ngenetohost = dev->FWInterfaceBuffer + 256; + dev->EventBuffer = dev->FWInterfaceBuffer + 512; + + dev->OverflowBuffer = pci_alloc_consistent(dev->pci_dev, + OVERFLOW_BUFFER_SIZE, + &dev->PAOverflowBuffer); + if (!dev->OverflowBuffer) + return -ENOMEM; + memset(dev->OverflowBuffer, 0, OVERFLOW_BUFFER_SIZE); + + for (i = STREAM_VIDEOIN1; i < MAX_STREAM; i++) { + int type = dev->card_info->io_type[i]; + + dev->channel[i].State = KSSTATE_STOP; + + if (type & (NGENE_IO_TV | NGENE_IO_HDTV | NGENE_IO_AIN)) { + status = create_ring_buffer(dev->pci_dev, + &dev->channel[i].RingBuffer, + RingBufferSizes[i]); + if (status < 0) + break; + + if (type & (NGENE_IO_TV | NGENE_IO_AIN)) { + status = AllocateRingBuffers(dev->pci_dev, + dev-> + PAOverflowBuffer, + &dev->channel[i]. + RingBuffer, + Buffer1Sizes[i], + Buffer2Sizes[i]); + if (status < 0) + break; + } else if (type & NGENE_IO_HDTV) { + status = AllocateRingBuffers(dev->pci_dev, + dev-> + PAOverflowBuffer, + &dev->channel[i]. + RingBuffer, + MAX_HDTV_BUFFER_SIZE, + 0); + if (status < 0) + break; + } + } + + if (type & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) { + + status = create_ring_buffer(dev->pci_dev, + &dev->channel[i]. + TSRingBuffer, RING_SIZE_TS); + if (status < 0) + break; + + status = AllocateRingBuffers(dev->pci_dev, + dev->PAOverflowBuffer, + &dev->channel[i]. + TSRingBuffer, + MAX_TS_BUFFER_SIZE, 0); + if (status) + break; + } + + if (type & NGENE_IO_TSOUT) { + status = create_ring_buffer(dev->pci_dev, + &dev->channel[i]. + TSIdleBuffer, 1); + if (status < 0) + break; + status = AllocateRingBuffers(dev->pci_dev, + dev->PAOverflowBuffer, + &dev->channel[i]. + TSIdleBuffer, + MAX_TS_BUFFER_SIZE, 0); + if (status) + break; + FillTSIdleBuffer(&dev->channel[i].TSIdleBuffer, + &dev->channel[i].TSRingBuffer); + } + } + return status; +} + +static void ngene_release_buffers(struct ngene *dev) +{ + if (dev->iomem) + iounmap(dev->iomem); + free_common_buffers(dev); + vfree(dev->tsout_buf); + vfree(dev->tsin_buf); + vfree(dev->ain_buf); + vfree(dev->vin_buf); + vfree(dev); +} + +static int ngene_get_buffers(struct ngene *dev) +{ + if (AllocCommonBuffers(dev)) + return -ENOMEM; + if (dev->card_info->io_type[4] & NGENE_IO_TSOUT) { + dev->tsout_buf = vmalloc(TSOUT_BUF_SIZE); + if (!dev->tsout_buf) + return -ENOMEM; + dvb_ringbuffer_init(&dev->tsout_rbuf, + dev->tsout_buf, TSOUT_BUF_SIZE); + } + if (dev->card_info->io_type[2]&NGENE_IO_TSIN) { + dev->tsin_buf = vmalloc(TSIN_BUF_SIZE); + if (!dev->tsin_buf) + return -ENOMEM; + dvb_ringbuffer_init(&dev->tsin_rbuf, + dev->tsin_buf, TSIN_BUF_SIZE); + } + if (dev->card_info->io_type[2] & NGENE_IO_AIN) { + dev->ain_buf = vmalloc(AIN_BUF_SIZE); + if (!dev->ain_buf) + return -ENOMEM; + dvb_ringbuffer_init(&dev->ain_rbuf, dev->ain_buf, AIN_BUF_SIZE); + } + if (dev->card_info->io_type[0] & NGENE_IO_HDTV) { + dev->vin_buf = vmalloc(VIN_BUF_SIZE); + if (!dev->vin_buf) + return -ENOMEM; + dvb_ringbuffer_init(&dev->vin_rbuf, dev->vin_buf, VIN_BUF_SIZE); + } + dev->iomem = ioremap(pci_resource_start(dev->pci_dev, 0), + pci_resource_len(dev->pci_dev, 0)); + if (!dev->iomem) + return -ENOMEM; + + return 0; +} + +static void ngene_init(struct ngene *dev) +{ + int i; + + tasklet_init(&dev->event_tasklet, event_tasklet, (unsigned long)dev); + + memset_io(dev->iomem + 0xc000, 0x00, 0x220); + memset_io(dev->iomem + 0xc400, 0x00, 0x100); + + for (i = 0; i < MAX_STREAM; i++) { + dev->channel[i].dev = dev; + dev->channel[i].number = i; + } + + dev->fw_interface_version = 0; + + ngwritel(0, NGENE_INT_ENABLE); + + dev->icounts = ngreadl(NGENE_INT_COUNTS); + + dev->device_version = ngreadl(DEV_VER) & 0x0f; + printk(KERN_INFO DEVICE_NAME ": Device version %d\n", + dev->device_version); +} + +static int ngene_load_firm(struct ngene *dev) +{ + u32 size; + const struct firmware *fw = NULL; + u8 *ngene_fw; + char *fw_name; + int err, version; + + version = dev->card_info->fw_version; + + switch (version) { + default: + case 15: + version = 15; + size = 23466; + fw_name = "ngene_15.fw"; + dev->cmd_timeout_workaround = true; + break; + case 16: + size = 23498; + fw_name = "ngene_16.fw"; + dev->cmd_timeout_workaround = true; + break; + case 17: + size = 24446; + fw_name = "ngene_17.fw"; + dev->cmd_timeout_workaround = true; + break; + case 18: + size = 0; + fw_name = "ngene_18.fw"; + break; + } + + if (request_firmware(&fw, fw_name, &dev->pci_dev->dev) < 0) { + printk(KERN_ERR DEVICE_NAME + ": Could not load firmware file %s.\n", fw_name); + printk(KERN_INFO DEVICE_NAME + ": Copy %s to your hotplug directory!\n", fw_name); + return -1; + } + if (size == 0) + size = fw->size; + if (size != fw->size) { + printk(KERN_ERR DEVICE_NAME + ": Firmware %s has invalid size!", fw_name); + err = -1; + } else { + printk(KERN_INFO DEVICE_NAME + ": Loading firmware file %s.\n", fw_name); + ngene_fw = (u8 *) fw->data; + err = ngene_command_load_firmware(dev, ngene_fw, size); + } + + release_firmware(fw); + + return err; +} + +static void ngene_stop(struct ngene *dev) +{ + down(&dev->cmd_mutex); + i2c_del_adapter(&(dev->channel[0].i2c_adapter)); + i2c_del_adapter(&(dev->channel[1].i2c_adapter)); + ngwritel(0, NGENE_INT_ENABLE); + ngwritel(0, NGENE_COMMAND); + ngwritel(0, NGENE_COMMAND_HI); + ngwritel(0, NGENE_STATUS); + ngwritel(0, NGENE_STATUS_HI); + ngwritel(0, NGENE_EVENT); + ngwritel(0, NGENE_EVENT_HI); + free_irq(dev->pci_dev->irq, dev); +#ifdef CONFIG_PCI_MSI + if (dev->msi_enabled) + pci_disable_msi(dev->pci_dev); +#endif +} + +static int ngene_buffer_config(struct ngene *dev) +{ + int stat; + + if (dev->card_info->fw_version >= 17) { + u8 tsin12_config[6] = { 0x60, 0x60, 0x00, 0x00, 0x00, 0x00 }; + u8 tsin1234_config[6] = { 0x30, 0x30, 0x00, 0x30, 0x30, 0x00 }; + u8 tsio1235_config[6] = { 0x30, 0x30, 0x00, 0x28, 0x00, 0x38 }; + u8 *bconf = tsin12_config; + + if (dev->card_info->io_type[2]&NGENE_IO_TSIN && + dev->card_info->io_type[3]&NGENE_IO_TSIN) { + bconf = tsin1234_config; + if (dev->card_info->io_type[4]&NGENE_IO_TSOUT && + dev->ci.en) + bconf = tsio1235_config; + } + stat = ngene_command_config_free_buf(dev, bconf); + } else { + int bconf = BUFFER_CONFIG_4422; + + if (dev->card_info->io_type[3] == NGENE_IO_TSIN) + bconf = BUFFER_CONFIG_3333; + stat = ngene_command_config_buf(dev, bconf); + } + return stat; +} + + +static int ngene_start(struct ngene *dev) +{ + int stat; + int i; + + pci_set_master(dev->pci_dev); + ngene_init(dev); + + stat = request_irq(dev->pci_dev->irq, irq_handler, + IRQF_SHARED, "nGene", + (void *)dev); + if (stat < 0) + return stat; + + init_waitqueue_head(&dev->cmd_wq); + init_waitqueue_head(&dev->tx_wq); + init_waitqueue_head(&dev->rx_wq); + sema_init(&dev->cmd_mutex, 1); + sema_init(&dev->stream_mutex, 1); + sema_init(&dev->pll_mutex, 1); + sema_init(&dev->i2c_switch_mutex, 1); + spin_lock_init(&dev->cmd_lock); + for (i = 0; i < MAX_STREAM; i++) + spin_lock_init(&dev->channel[i].state_lock); + ngwritel(1, TIMESTAMPS); + + ngwritel(1, NGENE_INT_ENABLE); + + stat = ngene_load_firm(dev); + if (stat < 0) + goto fail; + +#ifdef CONFIG_PCI_MSI + /* enable MSI if kernel and card support it */ + if (pci_msi_enabled() && dev->card_info->msi_supported) { + unsigned long flags; + + ngwritel(0, NGENE_INT_ENABLE); + free_irq(dev->pci_dev->irq, dev); + stat = pci_enable_msi(dev->pci_dev); + if (stat) { + printk(KERN_INFO DEVICE_NAME + ": MSI not available\n"); + flags = IRQF_SHARED; + } else { + flags = 0; + dev->msi_enabled = true; + } + stat = request_irq(dev->pci_dev->irq, irq_handler, + flags, "nGene", dev); + if (stat < 0) + goto fail2; + ngwritel(1, NGENE_INT_ENABLE); + } +#endif + + stat = ngene_i2c_init(dev, 0); + if (stat < 0) + goto fail; + + stat = ngene_i2c_init(dev, 1); + if (stat < 0) + goto fail; + + return 0; + +fail: + ngwritel(0, NGENE_INT_ENABLE); + free_irq(dev->pci_dev->irq, dev); +#ifdef CONFIG_PCI_MSI +fail2: + if (dev->msi_enabled) + pci_disable_msi(dev->pci_dev); +#endif + return stat; +} + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static void release_channel(struct ngene_channel *chan) +{ + struct dvb_demux *dvbdemux = &chan->demux; + struct ngene *dev = chan->dev; + + if (chan->running) + set_transfer(chan, 0); + + tasklet_kill(&chan->demux_tasklet); + + if (chan->ci_dev) { + dvb_unregister_device(chan->ci_dev); + chan->ci_dev = NULL; + } + + if (chan->fe2) + dvb_unregister_frontend(chan->fe2); + + if (chan->fe) { + dvb_unregister_frontend(chan->fe); + dvb_frontend_detach(chan->fe); + chan->fe = NULL; + } + + if (chan->has_demux) { + dvb_net_release(&chan->dvbnet); + dvbdemux->dmx.close(&dvbdemux->dmx); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, + &chan->hw_frontend); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, + &chan->mem_frontend); + dvb_dmxdev_release(&chan->dmxdev); + dvb_dmx_release(&chan->demux); + chan->has_demux = false; + } + + if (chan->has_adapter) { + dvb_unregister_adapter(&dev->adapter[chan->number]); + chan->has_adapter = false; + } +} + +static int init_channel(struct ngene_channel *chan) +{ + int ret = 0, nr = chan->number; + struct dvb_adapter *adapter = NULL; + struct dvb_demux *dvbdemux = &chan->demux; + struct ngene *dev = chan->dev; + struct ngene_info *ni = dev->card_info; + int io = ni->io_type[nr]; + + tasklet_init(&chan->demux_tasklet, demux_tasklet, (unsigned long)chan); + chan->users = 0; + chan->type = io; + chan->mode = chan->type; /* for now only one mode */ + + if (io & NGENE_IO_TSIN) { + chan->fe = NULL; + if (ni->demod_attach[nr]) { + ret = ni->demod_attach[nr](chan); + if (ret < 0) + goto err; + } + if (chan->fe && ni->tuner_attach[nr]) { + ret = ni->tuner_attach[nr](chan); + if (ret < 0) + goto err; + } + } + + if (!dev->ci.en && (io & NGENE_IO_TSOUT)) + return 0; + + if (io & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) { + if (nr >= STREAM_AUDIOIN1) + chan->DataFormatFlags = DF_SWAP32; + + if (nr == 0 || !one_adapter || dev->first_adapter == NULL) { + adapter = &dev->adapter[nr]; + ret = dvb_register_adapter(adapter, "nGene", + THIS_MODULE, + &chan->dev->pci_dev->dev, + adapter_nr); + if (ret < 0) + goto err; + if (dev->first_adapter == NULL) + dev->first_adapter = adapter; + chan->has_adapter = true; + } else + adapter = dev->first_adapter; + } + + if (dev->ci.en && (io & NGENE_IO_TSOUT)) { + dvb_ca_en50221_init(adapter, dev->ci.en, 0, 1); + set_transfer(chan, 1); + chan->dev->channel[2].DataFormatFlags = DF_SWAP32; + set_transfer(&chan->dev->channel[2], 1); + dvb_register_device(adapter, &chan->ci_dev, + &ngene_dvbdev_ci, (void *) chan, + DVB_DEVICE_SEC); + if (!chan->ci_dev) + goto err; + } + + if (chan->fe) { + if (dvb_register_frontend(adapter, chan->fe) < 0) + goto err; + chan->has_demux = true; + } + if (chan->fe2) { + if (dvb_register_frontend(adapter, chan->fe2) < 0) + goto err; + chan->fe2->tuner_priv = chan->fe->tuner_priv; + memcpy(&chan->fe2->ops.tuner_ops, + &chan->fe->ops.tuner_ops, + sizeof(struct dvb_tuner_ops)); + } + + if (chan->has_demux) { + ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux", + ngene_start_feed, + ngene_stop_feed, chan); + ret = my_dvb_dmxdev_ts_card_init(&chan->dmxdev, &chan->demux, + &chan->hw_frontend, + &chan->mem_frontend, adapter); + ret = dvb_net_init(adapter, &chan->dvbnet, &chan->demux.dmx); + } + + return ret; + +err: + if (chan->fe) { + dvb_frontend_detach(chan->fe); + chan->fe = NULL; + } + release_channel(chan); + return 0; +} + +static int init_channels(struct ngene *dev) +{ + int i, j; + + for (i = 0; i < MAX_STREAM; i++) { + dev->channel[i].number = i; + if (init_channel(&dev->channel[i]) < 0) { + for (j = i - 1; j >= 0; j--) + release_channel(&dev->channel[j]); + return -1; + } + } + return 0; +} + +static struct cxd2099_cfg cxd_cfg = { + .bitrate = 62000, + .adr = 0x40, + .polarity = 0, + .clock_mode = 0, +}; + +static void cxd_attach(struct ngene *dev) +{ + struct ngene_ci *ci = &dev->ci; + + ci->en = cxd2099_attach(&cxd_cfg, dev, &dev->channel[0].i2c_adapter); + ci->dev = dev; + return; +} + +static void cxd_detach(struct ngene *dev) +{ + struct ngene_ci *ci = &dev->ci; + + dvb_ca_en50221_release(ci->en); + kfree(ci->en); + ci->en = 0; +} + +/***********************************/ +/* workaround for shutdown failure */ +/***********************************/ + +static void ngene_unlink(struct ngene *dev) +{ + struct ngene_command com; + + com.cmd.hdr.Opcode = CMD_MEM_WRITE; + com.cmd.hdr.Length = 3; + com.cmd.MemoryWrite.address = 0x910c; + com.cmd.MemoryWrite.data = 0xff; + com.in_len = 3; + com.out_len = 1; + + down(&dev->cmd_mutex); + ngwritel(0, NGENE_INT_ENABLE); + ngene_command_mutex(dev, &com); + up(&dev->cmd_mutex); +} + +void ngene_shutdown(struct pci_dev *pdev) +{ + struct ngene *dev = (struct ngene *)pci_get_drvdata(pdev); + + if (!dev || !shutdown_workaround) + return; + + printk(KERN_INFO DEVICE_NAME ": shutdown workaround...\n"); + ngene_unlink(dev); + pci_disable_device(pdev); +} + +/****************************************************************************/ +/* device probe/remove calls ************************************************/ +/****************************************************************************/ + +void ngene_remove(struct pci_dev *pdev) +{ + struct ngene *dev = pci_get_drvdata(pdev); + int i; + + tasklet_kill(&dev->event_tasklet); + for (i = MAX_STREAM - 1; i >= 0; i--) + release_channel(&dev->channel[i]); + if (dev->ci.en) + cxd_detach(dev); + ngene_stop(dev); + ngene_release_buffers(dev); + pci_set_drvdata(pdev, NULL); + pci_disable_device(pdev); +} + +int ngene_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) +{ + struct ngene *dev; + int stat = 0; + + if (pci_enable_device(pci_dev) < 0) + return -ENODEV; + + dev = vzalloc(sizeof(struct ngene)); + if (dev == NULL) { + stat = -ENOMEM; + goto fail0; + } + + dev->pci_dev = pci_dev; + dev->card_info = (struct ngene_info *)id->driver_data; + printk(KERN_INFO DEVICE_NAME ": Found %s\n", dev->card_info->name); + + pci_set_drvdata(pci_dev, dev); + + /* Alloc buffers and start nGene */ + stat = ngene_get_buffers(dev); + if (stat < 0) + goto fail1; + stat = ngene_start(dev); + if (stat < 0) + goto fail1; + + cxd_attach(dev); + + stat = ngene_buffer_config(dev); + if (stat < 0) + goto fail1; + + + dev->i2c_current_bus = -1; + + /* Register DVB adapters and devices for both channels */ + stat = init_channels(dev); + if (stat < 0) + goto fail2; + + return 0; + +fail2: + ngene_stop(dev); +fail1: + ngene_release_buffers(dev); +fail0: + pci_disable_device(pci_dev); + pci_set_drvdata(pci_dev, NULL); + return stat; +} diff --git a/drivers/media/pci/ngene/ngene-dvb.c b/drivers/media/pci/ngene/ngene-dvb.c new file mode 100644 index 00000000..fcb16a61 --- /dev/null +++ b/drivers/media/pci/ngene/ngene-dvb.c @@ -0,0 +1,261 @@ +/* + * ngene-dvb.c: nGene PCIe bridge driver - DVB functions + * + * Copyright (C) 2005-2007 Micronas + * + * Copyright (C) 2008-2009 Ralph Metzler + * Modifications for new nGene firmware, + * support for EEPROM-copying, + * support for new dual DVB-S2 card prototype + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ngene.h" + + +/****************************************************************************/ +/* COMMAND API interface ****************************************************/ +/****************************************************************************/ + +static ssize_t ts_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct ngene_channel *chan = dvbdev->priv; + struct ngene *dev = chan->dev; + + if (wait_event_interruptible(dev->tsout_rbuf.queue, + dvb_ringbuffer_free + (&dev->tsout_rbuf) >= count) < 0) + return 0; + + dvb_ringbuffer_write(&dev->tsout_rbuf, buf, count); + + return count; +} + +static ssize_t ts_read(struct file *file, char *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct ngene_channel *chan = dvbdev->priv; + struct ngene *dev = chan->dev; + int left, avail; + + left = count; + while (left) { + if (wait_event_interruptible( + dev->tsin_rbuf.queue, + dvb_ringbuffer_avail(&dev->tsin_rbuf) > 0) < 0) + return -EAGAIN; + avail = dvb_ringbuffer_avail(&dev->tsin_rbuf); + if (avail > left) + avail = left; + dvb_ringbuffer_read_user(&dev->tsin_rbuf, buf, avail); + left -= avail; + buf += avail; + } + return count; +} + +static const struct file_operations ci_fops = { + .owner = THIS_MODULE, + .read = ts_read, + .write = ts_write, + .open = dvb_generic_open, + .release = dvb_generic_release, +}; + +struct dvb_device ngene_dvbdev_ci = { + .priv = 0, + .readers = -1, + .writers = -1, + .users = -1, + .fops = &ci_fops, +}; + + +/****************************************************************************/ +/* DVB functions and API interface ******************************************/ +/****************************************************************************/ + +static void swap_buffer(u32 *p, u32 len) +{ + while (len) { + *p = swab32(*p); + p++; + len -= 4; + } +} + +/* start of filler packet */ +static u8 fill_ts[] = { 0x47, 0x1f, 0xff, 0x10, TS_FILLER }; + +/* #define DEBUG_CI_XFER */ +#ifdef DEBUG_CI_XFER +static u32 ok; +static u32 overflow; +static u32 stripped; +#endif + +void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags) +{ + struct ngene_channel *chan = priv; + struct ngene *dev = chan->dev; + + + if (flags & DF_SWAP32) + swap_buffer(buf, len); + + if (dev->ci.en && chan->number == 2) { + while (len >= 188) { + if (memcmp(buf, fill_ts, sizeof fill_ts) != 0) { + if (dvb_ringbuffer_free(&dev->tsin_rbuf) >= 188) { + dvb_ringbuffer_write(&dev->tsin_rbuf, buf, 188); + wake_up(&dev->tsin_rbuf.queue); +#ifdef DEBUG_CI_XFER + ok++; +#endif + } +#ifdef DEBUG_CI_XFER + else + overflow++; +#endif + } +#ifdef DEBUG_CI_XFER + else + stripped++; + + if (ok % 100 == 0 && overflow) + printk(KERN_WARNING "%s: ok %u overflow %u dropped %u\n", __func__, ok, overflow, stripped); +#endif + buf += 188; + len -= 188; + } + return NULL; + } + + if (chan->users > 0) + dvb_dmx_swfilter(&chan->demux, buf, len); + + return NULL; +} + +void *tsout_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags) +{ + struct ngene_channel *chan = priv; + struct ngene *dev = chan->dev; + u32 alen; + + alen = dvb_ringbuffer_avail(&dev->tsout_rbuf); + alen -= alen % 188; + + if (alen < len) + FillTSBuffer(buf + alen, len - alen, flags); + else + alen = len; + dvb_ringbuffer_read(&dev->tsout_rbuf, buf, alen); + if (flags & DF_SWAP32) + swap_buffer((u32 *)buf, alen); + wake_up_interruptible(&dev->tsout_rbuf.queue); + return buf; +} + + + +int ngene_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct ngene_channel *chan = dvbdmx->priv; + + if (chan->users == 0) { + if (!chan->dev->cmd_timeout_workaround || !chan->running) + set_transfer(chan, 1); + } + + return ++chan->users; +} + +int ngene_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct ngene_channel *chan = dvbdmx->priv; + + if (--chan->users) + return chan->users; + + if (!chan->dev->cmd_timeout_workaround) + set_transfer(chan, 0); + + return 0; +} + +int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id, + int (*start_feed)(struct dvb_demux_feed *), + int (*stop_feed)(struct dvb_demux_feed *), + void *priv) +{ + dvbdemux->priv = priv; + + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = start_feed; + dvbdemux->stop_feed = stop_feed; + dvbdemux->write_to_decoder = NULL; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING); + return dvb_dmx_init(dvbdemux); +} + +int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev, + struct dvb_demux *dvbdemux, + struct dmx_frontend *hw_frontend, + struct dmx_frontend *mem_frontend, + struct dvb_adapter *dvb_adapter) +{ + int ret; + + dmxdev->filternum = 256; + dmxdev->demux = &dvbdemux->dmx; + dmxdev->capabilities = 0; + ret = dvb_dmxdev_init(dmxdev, dvb_adapter); + if (ret < 0) + return ret; + + hw_frontend->source = DMX_FRONTEND_0; + dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend); + mem_frontend->source = DMX_MEMORY_FE; + dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend); + return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend); +} diff --git a/drivers/media/pci/ngene/ngene-i2c.c b/drivers/media/pci/ngene/ngene-i2c.c new file mode 100644 index 00000000..d28554f8 --- /dev/null +++ b/drivers/media/pci/ngene/ngene-i2c.c @@ -0,0 +1,176 @@ +/* + * ngene-i2c.c: nGene PCIe bridge driver i2c functions + * + * Copyright (C) 2005-2007 Micronas + * + * Copyright (C) 2008-2009 Ralph Metzler + * Modifications for new nGene firmware, + * support for EEPROM-copying, + * support for new dual DVB-S2 card prototype + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +/* FIXME - some of these can probably be removed */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ngene.h" + +/* Firmware command for i2c operations */ +static int ngene_command_i2c_read(struct ngene *dev, u8 adr, + u8 *out, u8 outlen, u8 *in, u8 inlen, int flag) +{ + struct ngene_command com; + + com.cmd.hdr.Opcode = CMD_I2C_READ; + com.cmd.hdr.Length = outlen + 3; + com.cmd.I2CRead.Device = adr << 1; + memcpy(com.cmd.I2CRead.Data, out, outlen); + com.cmd.I2CRead.Data[outlen] = inlen; + com.cmd.I2CRead.Data[outlen + 1] = 0; + com.in_len = outlen + 3; + com.out_len = inlen + 1; + + if (ngene_command(dev, &com) < 0) + return -EIO; + + if ((com.cmd.raw8[0] >> 1) != adr) + return -EIO; + + if (flag) + memcpy(in, com.cmd.raw8, inlen + 1); + else + memcpy(in, com.cmd.raw8 + 1, inlen); + return 0; +} + +static int ngene_command_i2c_write(struct ngene *dev, u8 adr, + u8 *out, u8 outlen) +{ + struct ngene_command com; + + + com.cmd.hdr.Opcode = CMD_I2C_WRITE; + com.cmd.hdr.Length = outlen + 1; + com.cmd.I2CRead.Device = adr << 1; + memcpy(com.cmd.I2CRead.Data, out, outlen); + com.in_len = outlen + 1; + com.out_len = 1; + + if (ngene_command(dev, &com) < 0) + return -EIO; + + if (com.cmd.raw8[0] == 1) + return -EIO; + + return 0; +} + +static void ngene_i2c_set_bus(struct ngene *dev, int bus) +{ + if (!(dev->card_info->i2c_access & 2)) + return; + if (dev->i2c_current_bus == bus) + return; + + switch (bus) { + case 0: + ngene_command_gpio_set(dev, 3, 0); + ngene_command_gpio_set(dev, 2, 1); + break; + + case 1: + ngene_command_gpio_set(dev, 2, 0); + ngene_command_gpio_set(dev, 3, 1); + break; + } + dev->i2c_current_bus = bus; +} + +static int ngene_i2c_master_xfer(struct i2c_adapter *adapter, + struct i2c_msg msg[], int num) +{ + struct ngene_channel *chan = + (struct ngene_channel *)i2c_get_adapdata(adapter); + struct ngene *dev = chan->dev; + + down(&dev->i2c_switch_mutex); + ngene_i2c_set_bus(dev, chan->number); + + if (num == 2 && msg[1].flags & I2C_M_RD && !(msg[0].flags & I2C_M_RD)) + if (!ngene_command_i2c_read(dev, msg[0].addr, + msg[0].buf, msg[0].len, + msg[1].buf, msg[1].len, 0)) + goto done; + + if (num == 1 && !(msg[0].flags & I2C_M_RD)) + if (!ngene_command_i2c_write(dev, msg[0].addr, + msg[0].buf, msg[0].len)) + goto done; + if (num == 1 && (msg[0].flags & I2C_M_RD)) + if (!ngene_command_i2c_read(dev, msg[0].addr, NULL, 0, + msg[0].buf, msg[0].len, 0)) + goto done; + + up(&dev->i2c_switch_mutex); + return -EIO; + +done: + up(&dev->i2c_switch_mutex); + return num; +} + + +static u32 ngene_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm ngene_i2c_algo = { + .master_xfer = ngene_i2c_master_xfer, + .functionality = ngene_i2c_functionality, +}; + +int ngene_i2c_init(struct ngene *dev, int dev_nr) +{ + struct i2c_adapter *adap = &(dev->channel[dev_nr].i2c_adapter); + + i2c_set_adapdata(adap, &(dev->channel[dev_nr])); + + strcpy(adap->name, "nGene"); + + adap->algo = &ngene_i2c_algo; + adap->algo_data = (void *)&(dev->channel[dev_nr]); + adap->dev.parent = &dev->pci_dev->dev; + + return i2c_add_adapter(adap); +} + diff --git a/drivers/media/pci/ngene/ngene.h b/drivers/media/pci/ngene/ngene.h new file mode 100644 index 00000000..22c39ff6 --- /dev/null +++ b/drivers/media/pci/ngene/ngene.h @@ -0,0 +1,920 @@ +/* + * ngene.h: nGene PCIe bridge driver + * + * Copyright (C) 2005-2007 Micronas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef _NGENE_H_ +#define _NGENE_H_ + +#include +#include +#include +#include +#include +#include + +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_ca_en50221.h" +#include "dvb_frontend.h" +#include "dvb_ringbuffer.h" +#include "dvb_net.h" +#include "cxd2099.h" + +#define DEVICE_NAME "ngene" + +#define NGENE_VID 0x18c3 +#define NGENE_PID 0x0720 + +#ifndef VIDEO_CAP_VC1 +#define VIDEO_CAP_AVC 128 +#define VIDEO_CAP_H264 128 +#define VIDEO_CAP_VC1 256 +#define VIDEO_CAP_WMV9 256 +#define VIDEO_CAP_MPEG4 512 +#endif + +enum STREAM { + STREAM_VIDEOIN1 = 0, /* ITU656 or TS Input */ + STREAM_VIDEOIN2, + STREAM_AUDIOIN1, /* I2S or SPI Input */ + STREAM_AUDIOIN2, + STREAM_AUDIOOUT, + MAX_STREAM +}; + +enum SMODE_BITS { + SMODE_AUDIO_SPDIF = 0x20, + SMODE_AVSYNC = 0x10, + SMODE_TRANSPORT_STREAM = 0x08, + SMODE_AUDIO_CAPTURE = 0x04, + SMODE_VBI_CAPTURE = 0x02, + SMODE_VIDEO_CAPTURE = 0x01 +}; + +enum STREAM_FLAG_BITS { + SFLAG_CHROMA_FORMAT_2COMP = 0x01, /* Chroma Format : 2's complement */ + SFLAG_CHROMA_FORMAT_OFFSET = 0x00, /* Chroma Format : Binary offset */ + SFLAG_ORDER_LUMA_CHROMA = 0x02, /* Byte order: Y,Cb,Y,Cr */ + SFLAG_ORDER_CHROMA_LUMA = 0x00, /* Byte order: Cb,Y,Cr,Y */ + SFLAG_COLORBAR = 0x04, /* Select colorbar */ +}; + +#define PROGRAM_ROM 0x0000 +#define PROGRAM_SRAM 0x1000 +#define PERIPHERALS0 0x8000 +#define PERIPHERALS1 0x9000 +#define SHARED_BUFFER 0xC000 + +#define HOST_TO_NGENE (SHARED_BUFFER+0x0000) +#define NGENE_TO_HOST (SHARED_BUFFER+0x0100) +#define NGENE_COMMAND (SHARED_BUFFER+0x0200) +#define NGENE_COMMAND_HI (SHARED_BUFFER+0x0204) +#define NGENE_STATUS (SHARED_BUFFER+0x0208) +#define NGENE_STATUS_HI (SHARED_BUFFER+0x020C) +#define NGENE_EVENT (SHARED_BUFFER+0x0210) +#define NGENE_EVENT_HI (SHARED_BUFFER+0x0214) +#define VARIABLES (SHARED_BUFFER+0x0210) + +#define NGENE_INT_COUNTS (SHARED_BUFFER+0x0260) +#define NGENE_INT_ENABLE (SHARED_BUFFER+0x0264) +#define NGENE_VBI_LINE_COUNT (SHARED_BUFFER+0x0268) + +#define BUFFER_GP_XMIT (SHARED_BUFFER+0x0800) +#define BUFFER_GP_RECV (SHARED_BUFFER+0x0900) +#define EEPROM_AREA (SHARED_BUFFER+0x0A00) + +#define SG_V_IN_1 (SHARED_BUFFER+0x0A80) +#define SG_VBI_1 (SHARED_BUFFER+0x0B00) +#define SG_A_IN_1 (SHARED_BUFFER+0x0B80) +#define SG_V_IN_2 (SHARED_BUFFER+0x0C00) +#define SG_VBI_2 (SHARED_BUFFER+0x0C80) +#define SG_A_IN_2 (SHARED_BUFFER+0x0D00) +#define SG_V_OUT (SHARED_BUFFER+0x0D80) +#define SG_A_OUT2 (SHARED_BUFFER+0x0E00) + +#define DATA_A_IN_1 (SHARED_BUFFER+0x0E80) +#define DATA_A_IN_2 (SHARED_BUFFER+0x0F00) +#define DATA_A_OUT (SHARED_BUFFER+0x0F80) +#define DATA_V_IN_1 (SHARED_BUFFER+0x1000) +#define DATA_V_IN_2 (SHARED_BUFFER+0x2000) +#define DATA_V_OUT (SHARED_BUFFER+0x3000) + +#define DATA_FIFO_AREA (SHARED_BUFFER+0x1000) + +#define TIMESTAMPS 0xA000 +#define SCRATCHPAD 0xA080 +#define FORCE_INT 0xA088 +#define FORCE_NMI 0xA090 +#define INT_STATUS 0xA0A0 + +#define DEV_VER 0x9004 + +#define FW_DEBUG_DEFAULT (PROGRAM_SRAM+0x00FF) + +struct SG_ADDR { + u64 start; + u64 curr; + u16 curr_ptr; + u16 elements; + u32 pad[3]; +} __attribute__ ((__packed__)); + +struct SHARED_MEMORY { + /* C000 */ + u32 HostToNgene[64]; + + /* C100 */ + u32 NgeneToHost[64]; + + /* C200 */ + u64 NgeneCommand; + u64 NgeneStatus; + u64 NgeneEvent; + + /* C210 */ + u8 pad1[0xc260 - 0xc218]; + + /* C260 */ + u32 IntCounts; + u32 IntEnable; + + /* C268 */ + u8 pad2[0xd000 - 0xc268]; + +} __attribute__ ((__packed__)); + +struct BUFFER_STREAM_RESULTS { + u32 Clock; /* Stream time in 100ns units */ + u16 RemainingLines; /* Remaining lines in this field. + 0 for complete field */ + u8 FieldCount; /* Video field number */ + u8 Flags; /* Bit 7 = Done, Bit 6 = seen, Bit 5 = overflow, + Bit 0 = FieldID */ + u16 BlockCount; /* Audio block count (unused) */ + u8 Reserved[2]; + u32 DTOUpdate; +} __attribute__ ((__packed__)); + +struct HW_SCATTER_GATHER_ELEMENT { + u64 Address; + u32 Length; + u32 Reserved; +} __attribute__ ((__packed__)); + +struct BUFFER_HEADER { + u64 Next; + struct BUFFER_STREAM_RESULTS SR; + + u32 Number_of_entries_1; + u32 Reserved5; + u64 Address_of_first_entry_1; + + u32 Number_of_entries_2; + u32 Reserved7; + u64 Address_of_first_entry_2; +} __attribute__ ((__packed__)); + +struct EVENT_BUFFER { + u32 TimeStamp; + u8 GPIOStatus; + u8 UARTStatus; + u8 RXCharacter; + u8 EventStatus; + u32 Reserved[2]; +} __attribute__ ((__packed__)); + +/* Firmware commands. */ + +enum OPCODES { + CMD_NOP = 0, + CMD_FWLOAD_PREPARE = 0x01, + CMD_FWLOAD_FINISH = 0x02, + CMD_I2C_READ = 0x03, + CMD_I2C_WRITE = 0x04, + + CMD_I2C_WRITE_NOSTOP = 0x05, + CMD_I2C_CONTINUE_WRITE = 0x06, + CMD_I2C_CONTINUE_WRITE_NOSTOP = 0x07, + + CMD_DEBUG_OUTPUT = 0x09, + + CMD_CONTROL = 0x10, + CMD_CONFIGURE_BUFFER = 0x11, + CMD_CONFIGURE_FREE_BUFFER = 0x12, + + CMD_SPI_READ = 0x13, + CMD_SPI_WRITE = 0x14, + + CMD_MEM_READ = 0x20, + CMD_MEM_WRITE = 0x21, + CMD_SFR_READ = 0x22, + CMD_SFR_WRITE = 0x23, + CMD_IRAM_READ = 0x24, + CMD_IRAM_WRITE = 0x25, + CMD_SET_GPIO_PIN = 0x26, + CMD_SET_GPIO_INT = 0x27, + CMD_CONFIGURE_UART = 0x28, + CMD_WRITE_UART = 0x29, + MAX_CMD +}; + +enum RESPONSES { + OK = 0, + ERROR = 1 +}; + +struct FW_HEADER { + u8 Opcode; + u8 Length; +} __attribute__ ((__packed__)); + +struct FW_I2C_WRITE { + struct FW_HEADER hdr; + u8 Device; + u8 Data[250]; +} __attribute__ ((__packed__)); + +struct FW_I2C_CONTINUE_WRITE { + struct FW_HEADER hdr; + u8 Data[250]; +} __attribute__ ((__packed__)); + +struct FW_I2C_READ { + struct FW_HEADER hdr; + u8 Device; + u8 Data[252]; /* followed by two bytes of read data count */ +} __attribute__ ((__packed__)); + +struct FW_SPI_WRITE { + struct FW_HEADER hdr; + u8 ModeSelect; + u8 Data[250]; +} __attribute__ ((__packed__)); + +struct FW_SPI_READ { + struct FW_HEADER hdr; + u8 ModeSelect; + u8 Data[252]; /* followed by two bytes of read data count */ +} __attribute__ ((__packed__)); + +struct FW_FWLOAD_PREPARE { + struct FW_HEADER hdr; +} __attribute__ ((__packed__)); + +struct FW_FWLOAD_FINISH { + struct FW_HEADER hdr; + u16 Address; /* address of final block */ + u16 Length; +} __attribute__ ((__packed__)); + +/* + * Meaning of FW_STREAM_CONTROL::Mode bits: + * Bit 7: Loopback PEXin to PEXout using TVOut channel + * Bit 6: AVLOOP + * Bit 5: Audio select; 0=I2S, 1=SPDIF + * Bit 4: AVSYNC + * Bit 3: Enable transport stream + * Bit 2: Enable audio capture + * Bit 1: Enable ITU-Video VBI capture + * Bit 0: Enable ITU-Video capture + * + * Meaning of FW_STREAM_CONTROL::Control bits (see UVI1_CTL) + * Bit 7: continuous capture + * Bit 6: capture one field + * Bit 5: capture one frame + * Bit 4: unused + * Bit 3: starting field; 0=odd, 1=even + * Bit 2: sample size; 0=8-bit, 1=10-bit + * Bit 1: data format; 0=UYVY, 1=YUY2 + * Bit 0: resets buffer pointers +*/ + +enum FSC_MODE_BITS { + SMODE_LOOPBACK = 0x80, + SMODE_AVLOOP = 0x40, + _SMODE_AUDIO_SPDIF = 0x20, + _SMODE_AVSYNC = 0x10, + _SMODE_TRANSPORT_STREAM = 0x08, + _SMODE_AUDIO_CAPTURE = 0x04, + _SMODE_VBI_CAPTURE = 0x02, + _SMODE_VIDEO_CAPTURE = 0x01 +}; + + +/* Meaning of FW_STREAM_CONTROL::Stream bits: + * Bit 3: Audio sample count: 0 = relative, 1 = absolute + * Bit 2: color bar select; 1=color bars, 0=CV3 decoder + * Bits 1-0: stream select, UVI1, UVI2, TVOUT + */ + +struct FW_STREAM_CONTROL { + struct FW_HEADER hdr; + u8 Stream; /* Stream number (UVI1, UVI2, TVOUT) */ + u8 Control; /* Value written to UVI1_CTL */ + u8 Mode; /* Controls clock source */ + u8 SetupDataLen; /* Length of setup data, MSB=1 write + backwards */ + u16 CaptureBlockCount; /* Blocks (a 256 Bytes) to capture per buffer + for TS and Audio */ + u64 Buffer_Address; /* Address of first buffer header */ + u16 BytesPerVideoLine; + u16 MaxLinesPerField; + u16 MinLinesPerField; + u16 Reserved_1; + u16 BytesPerVBILine; + u16 MaxVBILinesPerField; + u16 MinVBILinesPerField; + u16 SetupDataAddr; /* ngene relative address of setup data */ + u8 SetupData[32]; /* setup data */ +} __attribute__((__packed__)); + +#define AUDIO_BLOCK_SIZE 256 +#define TS_BLOCK_SIZE 256 + +struct FW_MEM_READ { + struct FW_HEADER hdr; + u16 address; +} __attribute__ ((__packed__)); + +struct FW_MEM_WRITE { + struct FW_HEADER hdr; + u16 address; + u8 data; +} __attribute__ ((__packed__)); + +struct FW_SFR_IRAM_READ { + struct FW_HEADER hdr; + u8 address; +} __attribute__ ((__packed__)); + +struct FW_SFR_IRAM_WRITE { + struct FW_HEADER hdr; + u8 address; + u8 data; +} __attribute__ ((__packed__)); + +struct FW_SET_GPIO_PIN { + struct FW_HEADER hdr; + u8 select; +} __attribute__ ((__packed__)); + +struct FW_SET_GPIO_INT { + struct FW_HEADER hdr; + u8 select; +} __attribute__ ((__packed__)); + +struct FW_SET_DEBUGMODE { + struct FW_HEADER hdr; + u8 debug_flags; +} __attribute__ ((__packed__)); + +struct FW_CONFIGURE_BUFFERS { + struct FW_HEADER hdr; + u8 config; +} __attribute__ ((__packed__)); + +enum _BUFFER_CONFIGS { + /* 4k UVI1, 4k UVI2, 2k AUD1, 2k AUD2 (standard usage) */ + BUFFER_CONFIG_4422 = 0, + /* 3k UVI1, 3k UVI2, 3k AUD1, 3k AUD2 (4x TS input usage) */ + BUFFER_CONFIG_3333 = 1, + /* 8k UVI1, 0k UVI2, 2k AUD1, 2k I2SOut (HDTV decoder usage) */ + BUFFER_CONFIG_8022 = 2, + BUFFER_CONFIG_FW17 = 255, /* Use new FW 17 command */ +}; + +struct FW_CONFIGURE_FREE_BUFFERS { + struct FW_HEADER hdr; + u8 UVI1_BufferLength; + u8 UVI2_BufferLength; + u8 TVO_BufferLength; + u8 AUD1_BufferLength; + u8 AUD2_BufferLength; + u8 TVA_BufferLength; +} __attribute__ ((__packed__)); + +struct FW_CONFIGURE_UART { + struct FW_HEADER hdr; + u8 UartControl; +} __attribute__ ((__packed__)); + +enum _UART_CONFIG { + _UART_BAUDRATE_19200 = 0, + _UART_BAUDRATE_9600 = 1, + _UART_BAUDRATE_4800 = 2, + _UART_BAUDRATE_2400 = 3, + _UART_RX_ENABLE = 0x40, + _UART_TX_ENABLE = 0x80, +}; + +struct FW_WRITE_UART { + struct FW_HEADER hdr; + u8 Data[252]; +} __attribute__ ((__packed__)); + + +struct ngene_command { + u32 in_len; + u32 out_len; + union { + u32 raw[64]; + u8 raw8[256]; + struct FW_HEADER hdr; + struct FW_I2C_WRITE I2CWrite; + struct FW_I2C_CONTINUE_WRITE I2CContinueWrite; + struct FW_I2C_READ I2CRead; + struct FW_STREAM_CONTROL StreamControl; + struct FW_FWLOAD_PREPARE FWLoadPrepare; + struct FW_FWLOAD_FINISH FWLoadFinish; + struct FW_MEM_READ MemoryRead; + struct FW_MEM_WRITE MemoryWrite; + struct FW_SFR_IRAM_READ SfrIramRead; + struct FW_SFR_IRAM_WRITE SfrIramWrite; + struct FW_SPI_WRITE SPIWrite; + struct FW_SPI_READ SPIRead; + struct FW_SET_GPIO_PIN SetGpioPin; + struct FW_SET_GPIO_INT SetGpioInt; + struct FW_SET_DEBUGMODE SetDebugMode; + struct FW_CONFIGURE_BUFFERS ConfigureBuffers; + struct FW_CONFIGURE_FREE_BUFFERS ConfigureFreeBuffers; + struct FW_CONFIGURE_UART ConfigureUart; + struct FW_WRITE_UART WriteUart; + } cmd; +} __attribute__ ((__packed__)); + +#define NGENE_INTERFACE_VERSION 0x103 +#define MAX_VIDEO_BUFFER_SIZE (417792) /* 288*1440 rounded up to next page */ +#define MAX_AUDIO_BUFFER_SIZE (8192) /* Gives room for about 23msec@48KHz */ +#define MAX_VBI_BUFFER_SIZE (28672) /* 1144*18 rounded up to next page */ +#define MAX_TS_BUFFER_SIZE (98304) /* 512*188 rounded up to next page */ +#define MAX_HDTV_BUFFER_SIZE (2080768) /* 541*1920*2 rounded up to next page + Max: (1920x1080i60) */ + +#define OVERFLOW_BUFFER_SIZE (8192) + +#define RING_SIZE_VIDEO 4 +#define RING_SIZE_AUDIO 8 +#define RING_SIZE_TS 8 + +#define NUM_SCATTER_GATHER_ENTRIES 8 + +#define MAX_DMA_LENGTH (((MAX_VIDEO_BUFFER_SIZE + MAX_VBI_BUFFER_SIZE) * \ + RING_SIZE_VIDEO * 2) + \ + (MAX_AUDIO_BUFFER_SIZE * RING_SIZE_AUDIO * 2) + \ + (MAX_TS_BUFFER_SIZE * RING_SIZE_TS * 4) + \ + (RING_SIZE_VIDEO * PAGE_SIZE * 2) + \ + (RING_SIZE_AUDIO * PAGE_SIZE * 2) + \ + (RING_SIZE_TS * PAGE_SIZE * 4) + \ + 8 * PAGE_SIZE + OVERFLOW_BUFFER_SIZE + PAGE_SIZE) + +#define EVENT_QUEUE_SIZE 16 + +/* Gathers the current state of a single channel. */ + +struct SBufferHeader { + struct BUFFER_HEADER ngeneBuffer; /* Physical descriptor */ + struct SBufferHeader *Next; + void *Buffer1; + struct HW_SCATTER_GATHER_ELEMENT *scList1; + void *Buffer2; + struct HW_SCATTER_GATHER_ELEMENT *scList2; +}; + +/* Sizeof SBufferHeader aligned to next 64 Bit boundary (hw restriction) */ +#define SIZEOF_SBufferHeader ((sizeof(struct SBufferHeader) + 63) & ~63) + +enum HWSTATE { + HWSTATE_STOP, + HWSTATE_STARTUP, + HWSTATE_RUN, + HWSTATE_PAUSE, +}; + +enum KSSTATE { + KSSTATE_STOP, + KSSTATE_ACQUIRE, + KSSTATE_PAUSE, + KSSTATE_RUN, +}; + +struct SRingBufferDescriptor { + struct SBufferHeader *Head; /* Points to first buffer in ring buffer + structure*/ + u64 PAHead; /* Physical address of first buffer */ + u32 MemSize; /* Memory size of allocated ring buffers + (needed for freeing) */ + u32 NumBuffers; /* Number of buffers in the ring */ + u32 Buffer1Length; /* Allocated length of Buffer 1 */ + u32 Buffer2Length; /* Allocated length of Buffer 2 */ + void *SCListMem; /* Memory to hold scatter gather lists for this + ring */ + u64 PASCListMem; /* Physical address .. */ + u32 SCListMemSize; /* Size of this memory */ +}; + +enum STREAMMODEFLAGS { + StreamMode_NONE = 0, /* Stream not used */ + StreamMode_ANALOG = 1, /* Analog: Stream 0,1 = Video, 2,3 = Audio */ + StreamMode_TSIN = 2, /* Transport stream input (all) */ + StreamMode_HDTV = 4, /* HDTV: Maximum 1920x1080p30,1920x1080i60 + (only stream 0) */ + StreamMode_TSOUT = 8, /* Transport stream output (only stream 3) */ +}; + + +enum BufferExchangeFlags { + BEF_EVEN_FIELD = 0x00000001, + BEF_CONTINUATION = 0x00000002, + BEF_MORE_DATA = 0x00000004, + BEF_OVERFLOW = 0x00000008, + DF_SWAP32 = 0x00010000, +}; + +typedef void *(IBufferExchange)(void *, void *, u32, u32, u32); + +struct MICI_STREAMINFO { + IBufferExchange *pExchange; + IBufferExchange *pExchangeVBI; /* Secondary (VBI, ancillary) */ + u8 Stream; + u8 Flags; + u8 Mode; + u8 Reserved; + u16 nLinesVideo; + u16 nBytesPerLineVideo; + u16 nLinesVBI; + u16 nBytesPerLineVBI; + u32 CaptureLength; /* Used for audio and transport stream */ +}; + +/****************************************************************************/ +/* STRUCTS ******************************************************************/ +/****************************************************************************/ + +/* sound hardware definition */ +#define MIXER_ADDR_TVTUNER 0 +#define MIXER_ADDR_LAST 0 + +struct ngene_channel; + +/*struct sound chip*/ + +struct mychip { + struct ngene_channel *chan; + struct snd_card *card; + struct pci_dev *pci; + struct snd_pcm_substream *substream; + struct snd_pcm *pcm; + unsigned long port; + int irq; + spinlock_t mixer_lock; + spinlock_t lock; + int mixer_volume[MIXER_ADDR_LAST + 1][2]; + int capture_source[MIXER_ADDR_LAST + 1][2]; +}; + +#ifdef NGENE_V4L +struct ngene_overlay { + int tvnorm; + struct v4l2_rect w; + enum v4l2_field field; + struct v4l2_clip *clips; + int nclips; + int setup_ok; +}; + +struct ngene_tvnorm { + int v4l2_id; + char *name; + u16 swidth, sheight; /* scaled standard width, height */ + int tuner_norm; + int soundstd; +}; + +struct ngene_vopen { + struct ngene_channel *ch; + enum v4l2_priority prio; + int width; + int height; + int depth; + struct videobuf_queue vbuf_q; + struct videobuf_queue vbi; + int fourcc; + int picxcount; + int resources; + enum v4l2_buf_type type; + const struct ngene_format *fmt; + + const struct ngene_format *ovfmt; + struct ngene_overlay ov; +}; +#endif + +struct ngene_channel { + struct device device; + struct i2c_adapter i2c_adapter; + + struct ngene *dev; + int number; + int type; + int mode; + bool has_adapter; + bool has_demux; + int demod_type; + int (*gate_ctrl)(struct dvb_frontend *, int); + + struct dvb_frontend *fe; + struct dvb_frontend *fe2; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dvb_net dvbnet; + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + int users; + struct video_device *v4l_dev; + struct dvb_device *ci_dev; + struct tasklet_struct demux_tasklet; + + struct SBufferHeader *nextBuffer; + enum KSSTATE State; + enum HWSTATE HWState; + u8 Stream; + u8 Flags; + u8 Mode; + IBufferExchange *pBufferExchange; + IBufferExchange *pBufferExchange2; + + spinlock_t state_lock; + u16 nLines; + u16 nBytesPerLine; + u16 nVBILines; + u16 nBytesPerVBILine; + u16 itumode; + u32 Capture1Length; + u32 Capture2Length; + struct SRingBufferDescriptor RingBuffer; + struct SRingBufferDescriptor TSRingBuffer; + struct SRingBufferDescriptor TSIdleBuffer; + + u32 DataFormatFlags; + + int AudioDTOUpdated; + u32 AudioDTOValue; + + int (*set_tone)(struct dvb_frontend *, fe_sec_tone_mode_t); + u8 lnbh; + + /* stuff from analog driver */ + + int minor; + struct mychip *mychip; + struct snd_card *soundcard; + u8 *evenbuffer; + u8 dma_on; + int soundstreamon; + int audiomute; + int soundbuffisallocated; + int sndbuffflag; + int tun_rdy; + int dec_rdy; + int tun_dec_rdy; + int lastbufferflag; + + struct ngene_tvnorm *tvnorms; + int tvnorm_num; + int tvnorm; + +#ifdef NGENE_V4L + int videousers; + struct v4l2_prio_state prio; + struct ngene_vopen init; + int resources; + struct v4l2_framebuffer fbuf; + struct ngene_buffer *screen; /* overlay */ + struct list_head capture; /* video capture queue */ + spinlock_t s_lock; + struct semaphore reslock; +#endif + + int running; +}; + + +struct ngene_ci { + struct device device; + struct i2c_adapter i2c_adapter; + + struct ngene *dev; + struct dvb_ca_en50221 *en; +}; + +struct ngene; + +typedef void (rx_cb_t)(struct ngene *, u32, u8); +typedef void (tx_cb_t)(struct ngene *, u32); + +struct ngene { + int nr; + struct pci_dev *pci_dev; + unsigned char *iomem; + + /*struct i2c_adapter i2c_adapter;*/ + + u32 device_version; + u32 fw_interface_version; + u32 icounts; + bool msi_enabled; + bool cmd_timeout_workaround; + + u8 *CmdDoneByte; + int BootFirmware; + void *OverflowBuffer; + dma_addr_t PAOverflowBuffer; + void *FWInterfaceBuffer; + dma_addr_t PAFWInterfaceBuffer; + u8 *ngenetohost; + u8 *hosttongene; + + struct EVENT_BUFFER EventQueue[EVENT_QUEUE_SIZE]; + int EventQueueOverflowCount; + int EventQueueOverflowFlag; + struct tasklet_struct event_tasklet; + struct EVENT_BUFFER *EventBuffer; + int EventQueueWriteIndex; + int EventQueueReadIndex; + + wait_queue_head_t cmd_wq; + int cmd_done; + struct semaphore cmd_mutex; + struct semaphore stream_mutex; + struct semaphore pll_mutex; + struct semaphore i2c_switch_mutex; + int i2c_current_channel; + int i2c_current_bus; + spinlock_t cmd_lock; + + struct dvb_adapter adapter[MAX_STREAM]; + struct dvb_adapter *first_adapter; /* "one_adapter" modprobe opt */ + struct ngene_channel channel[MAX_STREAM]; + + struct ngene_info *card_info; + + tx_cb_t *TxEventNotify; + rx_cb_t *RxEventNotify; + int tx_busy; + wait_queue_head_t tx_wq; + wait_queue_head_t rx_wq; +#define UART_RBUF_LEN 4096 + u8 uart_rbuf[UART_RBUF_LEN]; + int uart_rp, uart_wp; + +#define TS_FILLER 0x6f + + u8 *tsout_buf; +#define TSOUT_BUF_SIZE (512*188*8) + struct dvb_ringbuffer tsout_rbuf; + + u8 *tsin_buf; +#define TSIN_BUF_SIZE (512*188*8) + struct dvb_ringbuffer tsin_rbuf; + + u8 *ain_buf; +#define AIN_BUF_SIZE (128*1024) + struct dvb_ringbuffer ain_rbuf; + + + u8 *vin_buf; +#define VIN_BUF_SIZE (4*1920*1080) + struct dvb_ringbuffer vin_rbuf; + + unsigned long exp_val; + int prev_cmd; + + struct ngene_ci ci; +}; + +struct ngene_info { + int type; +#define NGENE_APP 0 +#define NGENE_TERRATEC 1 +#define NGENE_SIDEWINDER 2 +#define NGENE_RACER 3 +#define NGENE_VIPER 4 +#define NGENE_PYTHON 5 +#define NGENE_VBOX_V1 6 +#define NGENE_VBOX_V2 7 + + int fw_version; + bool msi_supported; + char *name; + + int io_type[MAX_STREAM]; +#define NGENE_IO_NONE 0 +#define NGENE_IO_TV 1 +#define NGENE_IO_HDTV 2 +#define NGENE_IO_TSIN 4 +#define NGENE_IO_TSOUT 8 +#define NGENE_IO_AIN 16 + + void *fe_config[4]; + void *tuner_config[4]; + + int (*demod_attach[4])(struct ngene_channel *); + int (*tuner_attach[4])(struct ngene_channel *); + + u8 avf[4]; + u8 msp[4]; + u8 demoda[4]; + u8 lnb[4]; + int i2c_access; + u8 ntsc; + u8 tsf[4]; + u8 i2s[4]; + + int (*gate_ctrl)(struct dvb_frontend *, int); + int (*switch_ctrl)(struct ngene_channel *, int, int); +}; + +#ifdef NGENE_V4L +struct ngene_format { + char *name; + int fourcc; /* video4linux 2 */ + int btformat; /* BT848_COLOR_FMT_* */ + int format; + int btswap; /* BT848_COLOR_CTL_* */ + int depth; /* bit/pixel */ + int flags; + int hshift, vshift; /* for planar modes */ + int palette; +}; + +#define RESOURCE_OVERLAY 1 +#define RESOURCE_VIDEO 2 +#define RESOURCE_VBI 4 + +struct ngene_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + /* ngene specific */ + const struct ngene_format *fmt; + int tvnorm; + int btformat; + int btswap; +}; +#endif + + +/* Provided by ngene-core.c */ +int ngene_probe(struct pci_dev *pci_dev, const struct pci_device_id *id); +void ngene_remove(struct pci_dev *pdev); +void ngene_shutdown(struct pci_dev *pdev); +int ngene_command(struct ngene *dev, struct ngene_command *com); +int ngene_command_gpio_set(struct ngene *dev, u8 select, u8 level); +void set_transfer(struct ngene_channel *chan, int state); +void FillTSBuffer(void *Buffer, int Length, u32 Flags); + +/* Provided by ngene-i2c.c */ +int ngene_i2c_init(struct ngene *dev, int dev_nr); + +/* Provided by ngene-dvb.c */ +extern struct dvb_device ngene_dvbdev_ci; +void *tsout_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags); +void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags); +int ngene_start_feed(struct dvb_demux_feed *dvbdmxfeed); +int ngene_stop_feed(struct dvb_demux_feed *dvbdmxfeed); +int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id, + int (*start_feed)(struct dvb_demux_feed *), + int (*stop_feed)(struct dvb_demux_feed *), + void *priv); +int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev, + struct dvb_demux *dvbdemux, + struct dmx_frontend *hw_frontend, + struct dmx_frontend *mem_frontend, + struct dvb_adapter *dvb_adapter); + +#endif + +/* LocalWords: Endif + */ diff --git a/drivers/media/pci/pluto2/Kconfig b/drivers/media/pci/pluto2/Kconfig new file mode 100644 index 00000000..7d8e6e87 --- /dev/null +++ b/drivers/media/pci/pluto2/Kconfig @@ -0,0 +1,15 @@ +config DVB_PLUTO2 + tristate "Pluto2 cards" + depends on DVB_CORE && PCI && I2C + select I2C_ALGOBIT + select DVB_TDA1004X + help + Support for PCI cards based on the Pluto2 FPGA like the Satelco + Easywatch Mobile Terrestrial DVB-T Receiver. + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y or M if you own such a device and want to use it. + diff --git a/drivers/media/pci/pluto2/Makefile b/drivers/media/pci/pluto2/Makefile new file mode 100644 index 00000000..524bf841 --- /dev/null +++ b/drivers/media/pci/pluto2/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_DVB_PLUTO2) += pluto2.o + +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/ diff --git a/drivers/media/pci/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c new file mode 100644 index 00000000..2290faee --- /dev/null +++ b/drivers/media/pci/pluto2/pluto2.c @@ -0,0 +1,814 @@ +/* + * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T] + * + * Copyright (C) 2005 Andreas Oberritter + * + * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ + * by Dany Salman + * Copyright (c) 2004 TDF + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" +#include "tda1004x.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define DRIVER_NAME "pluto2" + +#define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */ +#define REG_PCAR 0x0020 /* PC address register */ +#define REG_TSCR 0x0024 /* TS ctrl & status */ +#define REG_MISC 0x0028 /* miscellaneous */ +#define REG_MMAC 0x002c /* MSB MAC address */ +#define REG_IMAC 0x0030 /* ISB MAC address */ +#define REG_LMAC 0x0034 /* LSB MAC address */ +#define REG_SPID 0x0038 /* SPI data */ +#define REG_SLCS 0x003c /* serial links ctrl/status */ + +#define PID0_NOFIL (0x0001 << 16) +#define PIDn_ENP (0x0001 << 15) +#define PID0_END (0x0001 << 14) +#define PID0_AFIL (0x0001 << 13) +#define PIDn_PID (0x1fff << 0) + +#define TSCR_NBPACKETS (0x00ff << 24) +#define TSCR_DEM (0x0001 << 17) +#define TSCR_DE (0x0001 << 16) +#define TSCR_RSTN (0x0001 << 15) +#define TSCR_MSKO (0x0001 << 14) +#define TSCR_MSKA (0x0001 << 13) +#define TSCR_MSKL (0x0001 << 12) +#define TSCR_OVR (0x0001 << 11) +#define TSCR_AFUL (0x0001 << 10) +#define TSCR_LOCK (0x0001 << 9) +#define TSCR_IACK (0x0001 << 8) +#define TSCR_ADEF (0x007f << 0) + +#define MISC_DVR (0x0fff << 4) +#define MISC_ALED (0x0001 << 3) +#define MISC_FRST (0x0001 << 2) +#define MISC_LED1 (0x0001 << 1) +#define MISC_LED0 (0x0001 << 0) + +#define SPID_SPIDR (0x00ff << 0) + +#define SLCS_SCL (0x0001 << 7) +#define SLCS_SDA (0x0001 << 6) +#define SLCS_CSN (0x0001 << 2) +#define SLCS_OVR (0x0001 << 1) +#define SLCS_SWC (0x0001 << 0) + +#define TS_DMA_PACKETS (8) +#define TS_DMA_BYTES (188 * TS_DMA_PACKETS) + +#define I2C_ADDR_TDA10046 0x10 +#define I2C_ADDR_TUA6034 0xc2 +#define NHWFILTERS 8 + +struct pluto { + /* pci */ + struct pci_dev *pdev; + u8 __iomem *io_mem; + + /* dvb */ + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + struct dmxdev dmxdev; + struct dvb_adapter dvb_adapter; + struct dvb_demux demux; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + unsigned int full_ts_users; + unsigned int users; + + /* i2c */ + struct i2c_algo_bit_data i2c_bit; + struct i2c_adapter i2c_adap; + unsigned int i2cbug; + + /* irq */ + unsigned int overflow; + unsigned int dead; + + /* dma */ + dma_addr_t dma_addr; + u8 dma_buf[TS_DMA_BYTES]; + u8 dummy[4096]; +}; + +static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed) +{ + return container_of(feed->demux, struct pluto, demux); +} + +static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe) +{ + return container_of(fe->dvb, struct pluto, dvb_adapter); +} + +static inline u32 pluto_readreg(struct pluto *pluto, u32 reg) +{ + return readl(&pluto->io_mem[reg]); +} + +static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val) +{ + writel(val, &pluto->io_mem[reg]); +} + +static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits) +{ + u32 val = readl(&pluto->io_mem[reg]); + val &= ~mask; + val |= bits; + writel(val, &pluto->io_mem[reg]); +} + +static void pluto_write_tscr(struct pluto *pluto, u32 val) +{ + /* set the number of packets */ + val &= ~TSCR_ADEF; + val |= TS_DMA_PACKETS / 2; + + pluto_writereg(pluto, REG_TSCR, val); +} + +static void pluto_setsda(void *data, int state) +{ + struct pluto *pluto = data; + + if (state) + pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA); + else + pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0); +} + +static void pluto_setscl(void *data, int state) +{ + struct pluto *pluto = data; + + if (state) + pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL); + else + pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0); + + /* try to detect i2c_inb() to workaround hardware bug: + * reset SDA to high after SCL has been set to low */ + if ((state) && (pluto->i2cbug == 0)) { + pluto->i2cbug = 1; + } else { + if ((!state) && (pluto->i2cbug == 1)) + pluto_setsda(pluto, 1); + pluto->i2cbug = 0; + } +} + +static int pluto_getsda(void *data) +{ + struct pluto *pluto = data; + + return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA; +} + +static int pluto_getscl(void *data) +{ + struct pluto *pluto = data; + + return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL; +} + +static void pluto_reset_frontend(struct pluto *pluto, int reenable) +{ + u32 val = pluto_readreg(pluto, REG_MISC); + + if (val & MISC_FRST) { + val &= ~MISC_FRST; + pluto_writereg(pluto, REG_MISC, val); + } + if (reenable) { + val |= MISC_FRST; + pluto_writereg(pluto, REG_MISC, val); + } +} + +static void pluto_reset_ts(struct pluto *pluto, int reenable) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + if (val & TSCR_RSTN) { + val &= ~TSCR_RSTN; + pluto_write_tscr(pluto, val); + } + if (reenable) { + val |= TSCR_RSTN; + pluto_write_tscr(pluto, val); + } +} + +static void pluto_set_dma_addr(struct pluto *pluto) +{ + pluto_writereg(pluto, REG_PCAR, pluto->dma_addr); +} + +static int pluto_dma_map(struct pluto *pluto) +{ + pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + + return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr); +} + +static void pluto_dma_unmap(struct pluto *pluto) +{ + pci_unmap_single(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); +} + +static int pluto_start_feed(struct dvb_demux_feed *f) +{ + struct pluto *pluto = feed_to_pluto(f); + + /* enable PID filtering */ + if (pluto->users++ == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0); + + if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) + pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid); + else if (pluto->full_ts_users++ == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL); + + return 0; +} + +static int pluto_stop_feed(struct dvb_demux_feed *f) +{ + struct pluto *pluto = feed_to_pluto(f); + + /* disable PID filtering */ + if (--pluto->users == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL); + + if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) + pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff); + else if (--pluto->full_ts_users == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0); + + return 0; +} + +static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) +{ + /* synchronize the DMA transfer with the CPU + * first so that we see updated contents. */ + pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + + /* Workaround for broken hardware: + * [1] On startup NBPACKETS seems to contain an uninitialized value, + * but no packets have been transferred. + * [2] Sometimes (actually very often) NBPACKETS stays at zero + * although one packet has been transferred. + * [3] Sometimes (actually rarely), the card gets into an erroneous + * mode where it continuously generates interrupts, claiming it + * has received nbpackets>TS_DMA_PACKETS packets, but no packet + * has been transferred. Only a reset seems to solve this + */ + if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { + unsigned int i = 0; + while (pluto->dma_buf[i] == 0x47) + i += 188; + nbpackets = i / 188; + if (i == 0) { + pluto_reset_ts(pluto, 1); + dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n"); + } + } + + dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets); + + /* clear the dma buffer. this is needed to be able to identify + * new valid ts packets above */ + memset(pluto->dma_buf, 0, nbpackets * 188); + + /* reset the dma address */ + pluto_set_dma_addr(pluto); + + /* sync the buffer and give it back to the card */ + pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); +} + +static irqreturn_t pluto_irq(int irq, void *dev_id) +{ + struct pluto *pluto = dev_id; + u32 tscr; + + /* check whether an interrupt occurred on this device */ + tscr = pluto_readreg(pluto, REG_TSCR); + if (!(tscr & (TSCR_DE | TSCR_OVR))) + return IRQ_NONE; + + if (tscr == 0xffffffff) { + if (pluto->dead == 0) + dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n"); + /* It's dead Jim */ + pluto->dead = 1; + return IRQ_HANDLED; + } + + /* dma end interrupt */ + if (tscr & TSCR_DE) { + pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24); + /* overflow interrupt */ + if (tscr & TSCR_OVR) + pluto->overflow++; + if (pluto->overflow) { + dev_err(&pluto->pdev->dev, "overflow irq (%d)\n", + pluto->overflow); + pluto_reset_ts(pluto, 1); + pluto->overflow = 0; + } + } else if (tscr & TSCR_OVR) { + pluto->overflow++; + } + + /* ACK the interrupt */ + pluto_write_tscr(pluto, tscr | TSCR_IACK); + + return IRQ_HANDLED; +} + +static void pluto_enable_irqs(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + /* disable AFUL and LOCK interrupts */ + val |= (TSCR_MSKA | TSCR_MSKL); + /* enable DMA and OVERFLOW interrupts */ + val &= ~(TSCR_DEM | TSCR_MSKO); + /* clear pending interrupts */ + val |= TSCR_IACK; + + pluto_write_tscr(pluto, val); +} + +static void pluto_disable_irqs(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + /* disable all interrupts */ + val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL); + /* clear pending interrupts */ + val |= TSCR_IACK; + + pluto_write_tscr(pluto, val); +} + +static int pluto_hw_init(struct pluto *pluto) +{ + pluto_reset_frontend(pluto, 1); + + /* set automatic LED control by FPGA */ + pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); + + /* set data endianess */ +#ifdef __LITTLE_ENDIAN + pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); +#else + pluto_rw(pluto, REG_PIDn(0), PID0_END, 0); +#endif + /* map DMA and set address */ + pluto_dma_map(pluto); + pluto_set_dma_addr(pluto); + + /* enable interrupts */ + pluto_enable_irqs(pluto); + + /* reset TS logic */ + pluto_reset_ts(pluto, 1); + + return 0; +} + +static void pluto_hw_exit(struct pluto *pluto) +{ + /* disable interrupts */ + pluto_disable_irqs(pluto); + + pluto_reset_ts(pluto, 0); + + /* LED: disable automatic control, enable yellow, disable green */ + pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1); + + /* unmap DMA */ + pluto_dma_unmap(pluto); + + pluto_reset_frontend(pluto, 0); +} + +static inline u32 divide(u32 numerator, u32 denominator) +{ + if (denominator == 0) + return ~0; + + return DIV_ROUND_CLOSEST(numerator, denominator); +} + +/* LG Innotek TDTE-E001P (Infineon TUA6034) */ +static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct pluto *pluto = frontend_to_pluto(fe); + struct i2c_msg msg; + int ret; + u8 buf[4]; + u32 div; + + // Fref = 166.667 Hz + // Fref * 3 = 500.000 Hz + // IF = 36166667 + // IF / Fref = 217 + //div = divide(p->frequency + 36166667, 166667); + div = divide(p->frequency * 3, 500000) + 217; + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + + if (p->frequency < 611000000) + buf[2] = 0xb4; + else if (p->frequency < 811000000) + buf[2] = 0xbc; + else + buf[2] = 0xf4; + + // VHF: 174-230 MHz + // center: 350 MHz + // UHF: 470-862 MHz + if (p->frequency < 350000000) + buf[3] = 0x02; + else + buf[3] = 0x04; + + if (p->bandwidth_hz == 8000000) + buf[3] |= 0x08; + + msg.addr = I2C_ADDR_TUA6034 >> 1; + msg.flags = 0; + msg.buf = buf; + msg.len = sizeof(buf); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + ret = i2c_transfer(&pluto->i2c_adap, &msg, 1); + if (ret < 0) + return ret; + else if (ret == 0) + return -EREMOTEIO; + + return 0; +} + +static int pluto2_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct pluto *pluto = frontend_to_pluto(fe); + + return request_firmware(fw, name, &pluto->pdev->dev); +} + +static struct tda1004x_config pluto2_fe_config = { + .demod_address = I2C_ADDR_TDA10046 >> 1, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = pluto2_request_firmware, +}; + +static int frontend_init(struct pluto *pluto) +{ + int ret; + + pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap); + if (!pluto->fe) { + dev_err(&pluto->pdev->dev, "could not attach frontend\n"); + return -ENODEV; + } + pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params; + + ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe); + if (ret < 0) { + if (pluto->fe->ops.release) + pluto->fe->ops.release(pluto->fe); + return ret; + } + + return 0; +} + +static void pluto_read_rev(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR; + dev_info(&pluto->pdev->dev, "board revision %d.%d\n", + (val >> 12) & 0x0f, (val >> 4) & 0xff); +} + +static void pluto_read_mac(struct pluto *pluto, u8 *mac) +{ + u32 val = pluto_readreg(pluto, REG_MMAC); + mac[0] = (val >> 8) & 0xff; + mac[1] = (val >> 0) & 0xff; + + val = pluto_readreg(pluto, REG_IMAC); + mac[2] = (val >> 8) & 0xff; + mac[3] = (val >> 0) & 0xff; + + val = pluto_readreg(pluto, REG_LMAC); + mac[4] = (val >> 8) & 0xff; + mac[5] = (val >> 0) & 0xff; + + dev_info(&pluto->pdev->dev, "MAC %pM\n", mac); +} + +static int pluto_read_serial(struct pluto *pluto) +{ + struct pci_dev *pdev = pluto->pdev; + unsigned int i, j; + u8 __iomem *cis; + + cis = pci_iomap(pdev, 1, 0); + if (!cis) + return -EIO; + + dev_info(&pdev->dev, "S/N "); + + for (i = 0xe0; i < 0x100; i += 4) { + u32 val = readl(&cis[i]); + for (j = 0; j < 32; j += 8) { + if ((val & 0xff) == 0xff) + goto out; + printk("%c", val & 0xff); + val >>= 8; + } + } +out: + printk("\n"); + pci_iounmap(pdev, cis); + + return 0; +} + +static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct pluto *pluto; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + int ret = -ENOMEM; + + pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL); + if (!pluto) + goto out; + + pluto->pdev = pdev; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err_kfree; + + /* enable interrupts */ + pci_write_config_dword(pdev, 0x6c, 0x8000); + + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + pluto->io_mem = pci_iomap(pdev, 0, 0x40); + if (!pluto->io_mem) { + ret = -EIO; + goto err_pci_release_regions; + } + + pci_set_drvdata(pdev, pluto); + + ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto); + if (ret < 0) + goto err_pci_iounmap; + + ret = pluto_hw_init(pluto); + if (ret < 0) + goto err_free_irq; + + /* i2c */ + i2c_set_adapdata(&pluto->i2c_adap, pluto); + strcpy(pluto->i2c_adap.name, DRIVER_NAME); + pluto->i2c_adap.owner = THIS_MODULE; + pluto->i2c_adap.dev.parent = &pdev->dev; + pluto->i2c_adap.algo_data = &pluto->i2c_bit; + pluto->i2c_bit.data = pluto; + pluto->i2c_bit.setsda = pluto_setsda; + pluto->i2c_bit.setscl = pluto_setscl; + pluto->i2c_bit.getsda = pluto_getsda; + pluto->i2c_bit.getscl = pluto_getscl; + pluto->i2c_bit.udelay = 10; + pluto->i2c_bit.timeout = 10; + + /* Raise SCL and SDA */ + pluto_setsda(pluto, 1); + pluto_setscl(pluto, 1); + + ret = i2c_bit_add_bus(&pluto->i2c_adap); + if (ret < 0) + goto err_pluto_hw_exit; + + /* dvb */ + ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, + THIS_MODULE, &pdev->dev, adapter_nr); + if (ret < 0) + goto err_i2c_del_adapter; + + dvb_adapter = &pluto->dvb_adapter; + + pluto_read_rev(pluto); + pluto_read_serial(pluto); + pluto_read_mac(pluto, dvb_adapter->proposed_mac); + + dvbdemux = &pluto->demux; + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = pluto_start_feed; + dvbdemux->stop_feed = pluto_stop_feed; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + ret = dvb_dmx_init(dvbdemux); + if (ret < 0) + goto err_dvb_unregister_adapter; + + dmx = &dvbdemux->dmx; + + pluto->hw_frontend.source = DMX_FRONTEND_0; + pluto->mem_frontend.source = DMX_MEMORY_FE; + pluto->dmxdev.filternum = NHWFILTERS; + pluto->dmxdev.demux = dmx; + + ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter); + if (ret < 0) + goto err_dvb_dmx_release; + + ret = dmx->add_frontend(dmx, &pluto->hw_frontend); + if (ret < 0) + goto err_dvb_dmxdev_release; + + ret = dmx->add_frontend(dmx, &pluto->mem_frontend); + if (ret < 0) + goto err_remove_hw_frontend; + + ret = dmx->connect_frontend(dmx, &pluto->hw_frontend); + if (ret < 0) + goto err_remove_mem_frontend; + + ret = frontend_init(pluto); + if (ret < 0) + goto err_disconnect_frontend; + + dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx); +out: + return ret; + +err_disconnect_frontend: + dmx->disconnect_frontend(dmx); +err_remove_mem_frontend: + dmx->remove_frontend(dmx, &pluto->mem_frontend); +err_remove_hw_frontend: + dmx->remove_frontend(dmx, &pluto->hw_frontend); +err_dvb_dmxdev_release: + dvb_dmxdev_release(&pluto->dmxdev); +err_dvb_dmx_release: + dvb_dmx_release(dvbdemux); +err_dvb_unregister_adapter: + dvb_unregister_adapter(dvb_adapter); +err_i2c_del_adapter: + i2c_del_adapter(&pluto->i2c_adap); +err_pluto_hw_exit: + pluto_hw_exit(pluto); +err_free_irq: + free_irq(pdev->irq, pluto); +err_pci_iounmap: + pci_iounmap(pdev, pluto->io_mem); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(pluto); + goto out; +} + +static void pluto2_remove(struct pci_dev *pdev) +{ + struct pluto *pluto = pci_get_drvdata(pdev); + struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter; + struct dvb_demux *dvbdemux = &pluto->demux; + struct dmx_demux *dmx = &dvbdemux->dmx; + + dmx->close(dmx); + dvb_net_release(&pluto->dvbnet); + if (pluto->fe) + dvb_unregister_frontend(pluto->fe); + + dmx->disconnect_frontend(dmx); + dmx->remove_frontend(dmx, &pluto->mem_frontend); + dmx->remove_frontend(dmx, &pluto->hw_frontend); + dvb_dmxdev_release(&pluto->dmxdev); + dvb_dmx_release(dvbdemux); + dvb_unregister_adapter(dvb_adapter); + i2c_del_adapter(&pluto->i2c_adap); + pluto_hw_exit(pluto); + free_irq(pdev->irq, pluto); + pci_iounmap(pdev, pluto->io_mem); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + kfree(pluto); +} + +#ifndef PCI_VENDOR_ID_SCM +#define PCI_VENDOR_ID_SCM 0x0432 +#endif +#ifndef PCI_DEVICE_ID_PLUTO2 +#define PCI_DEVICE_ID_PLUTO2 0x0001 +#endif + +static struct pci_device_id pluto2_id_table[] = { + { + .vendor = PCI_VENDOR_ID_SCM, + .device = PCI_DEVICE_ID_PLUTO2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* empty */ + }, +}; + +MODULE_DEVICE_TABLE(pci, pluto2_id_table); + +static struct pci_driver pluto2_driver = { + .name = DRIVER_NAME, + .id_table = pluto2_id_table, + .probe = pluto2_probe, + .remove = pluto2_remove, +}; + +static int __init pluto2_init(void) +{ + return pci_register_driver(&pluto2_driver); +} + +static void __exit pluto2_exit(void) +{ + pci_unregister_driver(&pluto2_driver); +} + +module_init(pluto2_init); +module_exit(pluto2_exit); + +MODULE_AUTHOR("Andreas Oberritter "); +MODULE_DESCRIPTION("Pluto2 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/pt1/Kconfig b/drivers/media/pci/pt1/Kconfig new file mode 100644 index 00000000..24501d5b --- /dev/null +++ b/drivers/media/pci/pt1/Kconfig @@ -0,0 +1,12 @@ +config DVB_PT1 + tristate "PT1 cards" + depends on DVB_CORE && PCI && I2C + help + Support for Earthsoft PT1 PCI cards. + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y or M if you own such a device and want to use it. + diff --git a/drivers/media/pci/pt1/Makefile b/drivers/media/pci/pt1/Makefile new file mode 100644 index 00000000..98e39129 --- /dev/null +++ b/drivers/media/pci/pt1/Makefile @@ -0,0 +1,5 @@ +earth-pt1-objs := pt1.o va1j5jf8007s.o va1j5jf8007t.o + +obj-$(CONFIG_DVB_PT1) += earth-pt1.o + +ccflags-y += -Idrivers/media/dvb-core -Idrivers/media/dvb-frontends diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c new file mode 100644 index 00000000..e9211086 --- /dev/null +++ b/drivers/media/pci/pt1/pt1.c @@ -0,0 +1,1245 @@ +/* + * driver for Earthsoft PT1/PT2 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dmxdev.h" +#include "dvb_net.h" +#include "dvb_frontend.h" + +#include "va1j5jf8007t.h" +#include "va1j5jf8007s.h" + +#define DRIVER_NAME "earth-pt1" + +#define PT1_PAGE_SHIFT 12 +#define PT1_PAGE_SIZE (1 << PT1_PAGE_SHIFT) +#define PT1_NR_UPACKETS 1024 +#define PT1_NR_BUFS 511 + +struct pt1_buffer_page { + __le32 upackets[PT1_NR_UPACKETS]; +}; + +struct pt1_table_page { + __le32 next_pfn; + __le32 buf_pfns[PT1_NR_BUFS]; +}; + +struct pt1_buffer { + struct pt1_buffer_page *page; + dma_addr_t addr; +}; + +struct pt1_table { + struct pt1_table_page *page; + dma_addr_t addr; + struct pt1_buffer bufs[PT1_NR_BUFS]; +}; + +#define PT1_NR_ADAPS 4 + +struct pt1_adapter; + +struct pt1 { + struct pci_dev *pdev; + void __iomem *regs; + struct i2c_adapter i2c_adap; + int i2c_running; + struct pt1_adapter *adaps[PT1_NR_ADAPS]; + struct pt1_table *tables; + struct task_struct *kthread; + int table_index; + int buf_index; + + struct mutex lock; + int power; + int reset; +}; + +struct pt1_adapter { + struct pt1 *pt1; + int index; + + u8 *buf; + int upacket_count; + int packet_count; + int st_count; + + struct dvb_adapter adap; + struct dvb_demux demux; + int users; + struct dmxdev dmxdev; + struct dvb_frontend *fe; + int (*orig_set_voltage)(struct dvb_frontend *fe, + fe_sec_voltage_t voltage); + int (*orig_sleep)(struct dvb_frontend *fe); + int (*orig_init)(struct dvb_frontend *fe); + + fe_sec_voltage_t voltage; + int sleep; +}; + +#define pt1_printk(level, pt1, format, arg...) \ + dev_printk(level, &(pt1)->pdev->dev, format, ##arg) + +static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data) +{ + writel(data, pt1->regs + reg * 4); +} + +static u32 pt1_read_reg(struct pt1 *pt1, int reg) +{ + return readl(pt1->regs + reg * 4); +} + +static int pt1_nr_tables = 8; +module_param_named(nr_tables, pt1_nr_tables, int, 0); + +static void pt1_increment_table_count(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x00000020); +} + +static void pt1_init_table_count(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x00000010); +} + +static void pt1_register_tables(struct pt1 *pt1, u32 first_pfn) +{ + pt1_write_reg(pt1, 5, first_pfn); + pt1_write_reg(pt1, 0, 0x0c000040); +} + +static void pt1_unregister_tables(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x08080000); +} + +static int pt1_sync(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 57; i++) { + if (pt1_read_reg(pt1, 0) & 0x20000000) + return 0; + pt1_write_reg(pt1, 0, 0x00000008); + } + pt1_printk(KERN_ERR, pt1, "could not sync\n"); + return -EIO; +} + +static u64 pt1_identify(struct pt1 *pt1) +{ + int i; + u64 id; + id = 0; + for (i = 0; i < 57; i++) { + id |= (u64)(pt1_read_reg(pt1, 0) >> 30 & 1) << i; + pt1_write_reg(pt1, 0, 0x00000008); + } + return id; +} + +static int pt1_unlock(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x00000008); + for (i = 0; i < 3; i++) { + if (pt1_read_reg(pt1, 0) & 0x80000000) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not unlock\n"); + return -EIO; +} + +static int pt1_reset_pci(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x01010000); + pt1_write_reg(pt1, 0, 0x01000000); + for (i = 0; i < 10; i++) { + if (pt1_read_reg(pt1, 0) & 0x00000001) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not reset PCI\n"); + return -EIO; +} + +static int pt1_reset_ram(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x02020000); + pt1_write_reg(pt1, 0, 0x02000000); + for (i = 0; i < 10; i++) { + if (pt1_read_reg(pt1, 0) & 0x00000002) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not reset RAM\n"); + return -EIO; +} + +static int pt1_do_enable_ram(struct pt1 *pt1) +{ + int i, j; + u32 status; + status = pt1_read_reg(pt1, 0) & 0x00000004; + pt1_write_reg(pt1, 0, 0x00000002); + for (i = 0; i < 10; i++) { + for (j = 0; j < 1024; j++) { + if ((pt1_read_reg(pt1, 0) & 0x00000004) != status) + return 0; + } + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not enable RAM\n"); + return -EIO; +} + +static int pt1_enable_ram(struct pt1 *pt1) +{ + int i, ret; + int phase; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + phase = pt1->pdev->device == 0x211a ? 128 : 166; + for (i = 0; i < phase; i++) { + ret = pt1_do_enable_ram(pt1); + if (ret < 0) + return ret; + } + return 0; +} + +static void pt1_disable_ram(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x0b0b0000); +} + +static void pt1_set_stream(struct pt1 *pt1, int index, int enabled) +{ + pt1_write_reg(pt1, 2, 1 << (index + 8) | enabled << index); +} + +static void pt1_init_streams(struct pt1 *pt1) +{ + int i; + for (i = 0; i < PT1_NR_ADAPS; i++) + pt1_set_stream(pt1, i, 0); +} + +static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) +{ + u32 upacket; + int i; + int index; + struct pt1_adapter *adap; + int offset; + u8 *buf; + int sc; + + if (!page->upackets[PT1_NR_UPACKETS - 1]) + return 0; + + for (i = 0; i < PT1_NR_UPACKETS; i++) { + upacket = le32_to_cpu(page->upackets[i]); + index = (upacket >> 29) - 1; + if (index < 0 || index >= PT1_NR_ADAPS) + continue; + + adap = pt1->adaps[index]; + if (upacket >> 25 & 1) + adap->upacket_count = 0; + else if (!adap->upacket_count) + continue; + + if (upacket >> 24 & 1) + printk_ratelimited(KERN_INFO "earth-pt1: device " + "buffer overflowing. table[%d] buf[%d]\n", + pt1->table_index, pt1->buf_index); + sc = upacket >> 26 & 0x7; + if (adap->st_count != -1 && sc != ((adap->st_count + 1) & 0x7)) + printk_ratelimited(KERN_INFO "earth-pt1: data loss" + " in streamID(adapter)[%d]\n", index); + adap->st_count = sc; + + buf = adap->buf; + offset = adap->packet_count * 188 + adap->upacket_count * 3; + buf[offset] = upacket >> 16; + buf[offset + 1] = upacket >> 8; + if (adap->upacket_count != 62) + buf[offset + 2] = upacket; + + if (++adap->upacket_count >= 63) { + adap->upacket_count = 0; + if (++adap->packet_count >= 21) { + dvb_dmx_swfilter_packets(&adap->demux, buf, 21); + adap->packet_count = 0; + } + } + } + + page->upackets[PT1_NR_UPACKETS - 1] = 0; + return 1; +} + +static int pt1_thread(void *data) +{ + struct pt1 *pt1; + struct pt1_buffer_page *page; + + pt1 = data; + set_freezable(); + + while (!kthread_should_stop()) { + try_to_freeze(); + + page = pt1->tables[pt1->table_index].bufs[pt1->buf_index].page; + if (!pt1_filter(pt1, page)) { + schedule_timeout_interruptible((HZ + 999) / 1000); + continue; + } + + if (++pt1->buf_index >= PT1_NR_BUFS) { + pt1_increment_table_count(pt1); + pt1->buf_index = 0; + if (++pt1->table_index >= pt1_nr_tables) + pt1->table_index = 0; + } + } + + return 0; +} + +static void pt1_free_page(struct pt1 *pt1, void *page, dma_addr_t addr) +{ + dma_free_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, page, addr); +} + +static void *pt1_alloc_page(struct pt1 *pt1, dma_addr_t *addrp, u32 *pfnp) +{ + void *page; + dma_addr_t addr; + + page = dma_alloc_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, &addr, + GFP_KERNEL); + if (page == NULL) + return NULL; + + BUG_ON(addr & (PT1_PAGE_SIZE - 1)); + BUG_ON(addr >> PT1_PAGE_SHIFT >> 31 >> 1); + + *addrp = addr; + *pfnp = addr >> PT1_PAGE_SHIFT; + return page; +} + +static void pt1_cleanup_buffer(struct pt1 *pt1, struct pt1_buffer *buf) +{ + pt1_free_page(pt1, buf->page, buf->addr); +} + +static int +pt1_init_buffer(struct pt1 *pt1, struct pt1_buffer *buf, u32 *pfnp) +{ + struct pt1_buffer_page *page; + dma_addr_t addr; + + page = pt1_alloc_page(pt1, &addr, pfnp); + if (page == NULL) + return -ENOMEM; + + page->upackets[PT1_NR_UPACKETS - 1] = 0; + + buf->page = page; + buf->addr = addr; + return 0; +} + +static void pt1_cleanup_table(struct pt1 *pt1, struct pt1_table *table) +{ + int i; + + for (i = 0; i < PT1_NR_BUFS; i++) + pt1_cleanup_buffer(pt1, &table->bufs[i]); + + pt1_free_page(pt1, table->page, table->addr); +} + +static int +pt1_init_table(struct pt1 *pt1, struct pt1_table *table, u32 *pfnp) +{ + struct pt1_table_page *page; + dma_addr_t addr; + int i, ret; + u32 buf_pfn; + + page = pt1_alloc_page(pt1, &addr, pfnp); + if (page == NULL) + return -ENOMEM; + + for (i = 0; i < PT1_NR_BUFS; i++) { + ret = pt1_init_buffer(pt1, &table->bufs[i], &buf_pfn); + if (ret < 0) + goto err; + + page->buf_pfns[i] = cpu_to_le32(buf_pfn); + } + + pt1_increment_table_count(pt1); + table->page = page; + table->addr = addr; + return 0; + +err: + while (i--) + pt1_cleanup_buffer(pt1, &table->bufs[i]); + + pt1_free_page(pt1, page, addr); + return ret; +} + +static void pt1_cleanup_tables(struct pt1 *pt1) +{ + struct pt1_table *tables; + int i; + + tables = pt1->tables; + pt1_unregister_tables(pt1); + + for (i = 0; i < pt1_nr_tables; i++) + pt1_cleanup_table(pt1, &tables[i]); + + vfree(tables); +} + +static int pt1_init_tables(struct pt1 *pt1) +{ + struct pt1_table *tables; + int i, ret; + u32 first_pfn, pfn; + + tables = vmalloc(sizeof(struct pt1_table) * pt1_nr_tables); + if (tables == NULL) + return -ENOMEM; + + pt1_init_table_count(pt1); + + i = 0; + if (pt1_nr_tables) { + ret = pt1_init_table(pt1, &tables[0], &first_pfn); + if (ret) + goto err; + i++; + } + + while (i < pt1_nr_tables) { + ret = pt1_init_table(pt1, &tables[i], &pfn); + if (ret) + goto err; + tables[i - 1].page->next_pfn = cpu_to_le32(pfn); + i++; + } + + tables[pt1_nr_tables - 1].page->next_pfn = cpu_to_le32(first_pfn); + + pt1_register_tables(pt1, first_pfn); + pt1->tables = tables; + return 0; + +err: + while (i--) + pt1_cleanup_table(pt1, &tables[i]); + + vfree(tables); + return ret; +} + +static int pt1_start_polling(struct pt1 *pt1) +{ + int ret = 0; + + mutex_lock(&pt1->lock); + if (!pt1->kthread) { + pt1->kthread = kthread_run(pt1_thread, pt1, "earth-pt1"); + if (IS_ERR(pt1->kthread)) { + ret = PTR_ERR(pt1->kthread); + pt1->kthread = NULL; + } + } + mutex_unlock(&pt1->lock); + return ret; +} + +static int pt1_start_feed(struct dvb_demux_feed *feed) +{ + struct pt1_adapter *adap; + adap = container_of(feed->demux, struct pt1_adapter, demux); + if (!adap->users++) { + int ret; + + ret = pt1_start_polling(adap->pt1); + if (ret) + return ret; + pt1_set_stream(adap->pt1, adap->index, 1); + } + return 0; +} + +static void pt1_stop_polling(struct pt1 *pt1) +{ + int i, count; + + mutex_lock(&pt1->lock); + for (i = 0, count = 0; i < PT1_NR_ADAPS; i++) + count += pt1->adaps[i]->users; + + if (count == 0 && pt1->kthread) { + kthread_stop(pt1->kthread); + pt1->kthread = NULL; + } + mutex_unlock(&pt1->lock); +} + +static int pt1_stop_feed(struct dvb_demux_feed *feed) +{ + struct pt1_adapter *adap; + adap = container_of(feed->demux, struct pt1_adapter, demux); + if (!--adap->users) { + pt1_set_stream(adap->pt1, adap->index, 0); + pt1_stop_polling(adap->pt1); + } + return 0; +} + +static void +pt1_update_power(struct pt1 *pt1) +{ + int bits; + int i; + struct pt1_adapter *adap; + static const int sleep_bits[] = { + 1 << 4, + 1 << 6 | 1 << 7, + 1 << 5, + 1 << 6 | 1 << 8, + }; + + bits = pt1->power | !pt1->reset << 3; + mutex_lock(&pt1->lock); + for (i = 0; i < PT1_NR_ADAPS; i++) { + adap = pt1->adaps[i]; + switch (adap->voltage) { + case SEC_VOLTAGE_13: /* actually 11V */ + bits |= 1 << 1; + break; + case SEC_VOLTAGE_18: /* actually 15V */ + bits |= 1 << 1 | 1 << 2; + break; + default: + break; + } + + /* XXX: The bits should be changed depending on adap->sleep. */ + bits |= sleep_bits[i]; + } + pt1_write_reg(pt1, 1, bits); + mutex_unlock(&pt1->lock); +} + +static int pt1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct pt1_adapter *adap; + + adap = container_of(fe->dvb, struct pt1_adapter, adap); + adap->voltage = voltage; + pt1_update_power(adap->pt1); + + if (adap->orig_set_voltage) + return adap->orig_set_voltage(fe, voltage); + else + return 0; +} + +static int pt1_sleep(struct dvb_frontend *fe) +{ + struct pt1_adapter *adap; + + adap = container_of(fe->dvb, struct pt1_adapter, adap); + adap->sleep = 1; + pt1_update_power(adap->pt1); + + if (adap->orig_sleep) + return adap->orig_sleep(fe); + else + return 0; +} + +static int pt1_wakeup(struct dvb_frontend *fe) +{ + struct pt1_adapter *adap; + + adap = container_of(fe->dvb, struct pt1_adapter, adap); + adap->sleep = 0; + pt1_update_power(adap->pt1); + schedule_timeout_uninterruptible((HZ + 999) / 1000); + + if (adap->orig_init) + return adap->orig_init(fe); + else + return 0; +} + +static void pt1_free_adapter(struct pt1_adapter *adap) +{ + adap->demux.dmx.close(&adap->demux.dmx); + dvb_dmxdev_release(&adap->dmxdev); + dvb_dmx_release(&adap->demux); + dvb_unregister_adapter(&adap->adap); + free_page((unsigned long)adap->buf); + kfree(adap); +} + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static struct pt1_adapter * +pt1_alloc_adapter(struct pt1 *pt1) +{ + struct pt1_adapter *adap; + void *buf; + struct dvb_adapter *dvb_adap; + struct dvb_demux *demux; + struct dmxdev *dmxdev; + int ret; + + adap = kzalloc(sizeof(struct pt1_adapter), GFP_KERNEL); + if (!adap) { + ret = -ENOMEM; + goto err; + } + + adap->pt1 = pt1; + + adap->voltage = SEC_VOLTAGE_OFF; + adap->sleep = 1; + + buf = (u8 *)__get_free_page(GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto err_kfree; + } + + adap->buf = buf; + adap->upacket_count = 0; + adap->packet_count = 0; + adap->st_count = -1; + + dvb_adap = &adap->adap; + dvb_adap->priv = adap; + ret = dvb_register_adapter(dvb_adap, DRIVER_NAME, THIS_MODULE, + &pt1->pdev->dev, adapter_nr); + if (ret < 0) + goto err_free_page; + + demux = &adap->demux; + demux->dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; + demux->priv = adap; + demux->feednum = 256; + demux->filternum = 256; + demux->start_feed = pt1_start_feed; + demux->stop_feed = pt1_stop_feed; + demux->write_to_decoder = NULL; + ret = dvb_dmx_init(demux); + if (ret < 0) + goto err_unregister_adapter; + + dmxdev = &adap->dmxdev; + dmxdev->filternum = 256; + dmxdev->demux = &demux->dmx; + dmxdev->capabilities = 0; + ret = dvb_dmxdev_init(dmxdev, dvb_adap); + if (ret < 0) + goto err_dmx_release; + + return adap; + +err_dmx_release: + dvb_dmx_release(demux); +err_unregister_adapter: + dvb_unregister_adapter(dvb_adap); +err_free_page: + free_page((unsigned long)buf); +err_kfree: + kfree(adap); +err: + return ERR_PTR(ret); +} + +static void pt1_cleanup_adapters(struct pt1 *pt1) +{ + int i; + for (i = 0; i < PT1_NR_ADAPS; i++) + pt1_free_adapter(pt1->adaps[i]); +} + +static int pt1_init_adapters(struct pt1 *pt1) +{ + int i; + struct pt1_adapter *adap; + int ret; + + for (i = 0; i < PT1_NR_ADAPS; i++) { + adap = pt1_alloc_adapter(pt1); + if (IS_ERR(adap)) { + ret = PTR_ERR(adap); + goto err; + } + + adap->index = i; + pt1->adaps[i] = adap; + } + return 0; + +err: + while (i--) + pt1_free_adapter(pt1->adaps[i]); + + return ret; +} + +static void pt1_cleanup_frontend(struct pt1_adapter *adap) +{ + dvb_unregister_frontend(adap->fe); +} + +static int pt1_init_frontend(struct pt1_adapter *adap, struct dvb_frontend *fe) +{ + int ret; + + adap->orig_set_voltage = fe->ops.set_voltage; + adap->orig_sleep = fe->ops.sleep; + adap->orig_init = fe->ops.init; + fe->ops.set_voltage = pt1_set_voltage; + fe->ops.sleep = pt1_sleep; + fe->ops.init = pt1_wakeup; + + ret = dvb_register_frontend(&adap->adap, fe); + if (ret < 0) + return ret; + + adap->fe = fe; + return 0; +} + +static void pt1_cleanup_frontends(struct pt1 *pt1) +{ + int i; + for (i = 0; i < PT1_NR_ADAPS; i++) + pt1_cleanup_frontend(pt1->adaps[i]); +} + +struct pt1_config { + struct va1j5jf8007s_config va1j5jf8007s_config; + struct va1j5jf8007t_config va1j5jf8007t_config; +}; + +static const struct pt1_config pt1_configs[2] = { + { + { + .demod_address = 0x1b, + .frequency = VA1J5JF8007S_20MHZ, + }, + { + .demod_address = 0x1a, + .frequency = VA1J5JF8007T_20MHZ, + }, + }, { + { + .demod_address = 0x19, + .frequency = VA1J5JF8007S_20MHZ, + }, + { + .demod_address = 0x18, + .frequency = VA1J5JF8007T_20MHZ, + }, + }, +}; + +static const struct pt1_config pt2_configs[2] = { + { + { + .demod_address = 0x1b, + .frequency = VA1J5JF8007S_25MHZ, + }, + { + .demod_address = 0x1a, + .frequency = VA1J5JF8007T_25MHZ, + }, + }, { + { + .demod_address = 0x19, + .frequency = VA1J5JF8007S_25MHZ, + }, + { + .demod_address = 0x18, + .frequency = VA1J5JF8007T_25MHZ, + }, + }, +}; + +static int pt1_init_frontends(struct pt1 *pt1) +{ + int i, j; + struct i2c_adapter *i2c_adap; + const struct pt1_config *configs, *config; + struct dvb_frontend *fe[4]; + int ret; + + i = 0; + j = 0; + + i2c_adap = &pt1->i2c_adap; + configs = pt1->pdev->device == 0x211a ? pt1_configs : pt2_configs; + do { + config = &configs[i / 2]; + + fe[i] = va1j5jf8007s_attach(&config->va1j5jf8007s_config, + i2c_adap); + if (!fe[i]) { + ret = -ENODEV; /* This does not sound nice... */ + goto err; + } + i++; + + fe[i] = va1j5jf8007t_attach(&config->va1j5jf8007t_config, + i2c_adap); + if (!fe[i]) { + ret = -ENODEV; + goto err; + } + i++; + + ret = va1j5jf8007s_prepare(fe[i - 2]); + if (ret < 0) + goto err; + + ret = va1j5jf8007t_prepare(fe[i - 1]); + if (ret < 0) + goto err; + + } while (i < 4); + + do { + ret = pt1_init_frontend(pt1->adaps[j], fe[j]); + if (ret < 0) + goto err; + } while (++j < 4); + + return 0; + +err: + while (i-- > j) + fe[i]->ops.release(fe[i]); + + while (j--) + dvb_unregister_frontend(fe[j]); + + return ret; +} + +static void pt1_i2c_emit(struct pt1 *pt1, int addr, int busy, int read_enable, + int clock, int data, int next_addr) +{ + pt1_write_reg(pt1, 4, addr << 18 | busy << 13 | read_enable << 12 | + !clock << 11 | !data << 10 | next_addr); +} + +static void pt1_i2c_write_bit(struct pt1 *pt1, int addr, int *addrp, int data) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, data, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, data, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, data, addr + 3); + *addrp = addr + 3; +} + +static void pt1_i2c_read_bit(struct pt1 *pt1, int addr, int *addrp) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 1, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 1, 1, 1, addr + 3); + pt1_i2c_emit(pt1, addr + 3, 1, 0, 0, 1, addr + 4); + *addrp = addr + 4; +} + +static void pt1_i2c_write_byte(struct pt1 *pt1, int addr, int *addrp, int data) +{ + int i; + for (i = 0; i < 8; i++) + pt1_i2c_write_bit(pt1, addr, &addr, data >> (7 - i) & 1); + pt1_i2c_write_bit(pt1, addr, &addr, 1); + *addrp = addr; +} + +static void pt1_i2c_read_byte(struct pt1 *pt1, int addr, int *addrp, int last) +{ + int i; + for (i = 0; i < 8; i++) + pt1_i2c_read_bit(pt1, addr, &addr); + pt1_i2c_write_bit(pt1, addr, &addr, last); + *addrp = addr; +} + +static void pt1_i2c_prepare(struct pt1 *pt1, int addr, int *addrp) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 1, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, 0, addr + 3); + *addrp = addr + 3; +} + +static void +pt1_i2c_write_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg) +{ + int i; + pt1_i2c_prepare(pt1, addr, &addr); + pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1); + for (i = 0; i < msg->len; i++) + pt1_i2c_write_byte(pt1, addr, &addr, msg->buf[i]); + *addrp = addr; +} + +static void +pt1_i2c_read_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg) +{ + int i; + pt1_i2c_prepare(pt1, addr, &addr); + pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1 | 1); + for (i = 0; i < msg->len; i++) + pt1_i2c_read_byte(pt1, addr, &addr, i == msg->len - 1); + *addrp = addr; +} + +static int pt1_i2c_end(struct pt1 *pt1, int addr) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, 0, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 1, 1, 0); + + pt1_write_reg(pt1, 0, 0x00000004); + do { + if (signal_pending(current)) + return -EINTR; + schedule_timeout_interruptible((HZ + 999) / 1000); + } while (pt1_read_reg(pt1, 0) & 0x00000080); + return 0; +} + +static void pt1_i2c_begin(struct pt1 *pt1, int *addrp) +{ + int addr; + addr = 0; + + pt1_i2c_emit(pt1, addr, 0, 0, 1, 1, addr /* itself */); + addr = addr + 1; + + if (!pt1->i2c_running) { + pt1_i2c_emit(pt1, addr, 1, 0, 1, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + addr = addr + 2; + pt1->i2c_running = 1; + } + *addrp = addr; +} + +static int pt1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct pt1 *pt1; + int i; + struct i2c_msg *msg, *next_msg; + int addr, ret; + u16 len; + u32 word; + + pt1 = i2c_get_adapdata(adap); + + for (i = 0; i < num; i++) { + msg = &msgs[i]; + if (msg->flags & I2C_M_RD) + return -ENOTSUPP; + + if (i + 1 < num) + next_msg = &msgs[i + 1]; + else + next_msg = NULL; + + if (next_msg && next_msg->flags & I2C_M_RD) { + i++; + + len = next_msg->len; + if (len > 4) + return -ENOTSUPP; + + pt1_i2c_begin(pt1, &addr); + pt1_i2c_write_msg(pt1, addr, &addr, msg); + pt1_i2c_read_msg(pt1, addr, &addr, next_msg); + ret = pt1_i2c_end(pt1, addr); + if (ret < 0) + return ret; + + word = pt1_read_reg(pt1, 2); + while (len--) { + next_msg->buf[len] = word; + word >>= 8; + } + } else { + pt1_i2c_begin(pt1, &addr); + pt1_i2c_write_msg(pt1, addr, &addr, msg); + ret = pt1_i2c_end(pt1, addr); + if (ret < 0) + return ret; + } + } + + return num; +} + +static u32 pt1_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static const struct i2c_algorithm pt1_i2c_algo = { + .master_xfer = pt1_i2c_xfer, + .functionality = pt1_i2c_func, +}; + +static void pt1_i2c_wait(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 128; i++) + pt1_i2c_emit(pt1, 0, 0, 0, 1, 1, 0); +} + +static void pt1_i2c_init(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 1024; i++) + pt1_i2c_emit(pt1, i, 0, 0, 1, 1, 0); +} + +static void pt1_remove(struct pci_dev *pdev) +{ + struct pt1 *pt1; + void __iomem *regs; + + pt1 = pci_get_drvdata(pdev); + regs = pt1->regs; + + if (pt1->kthread) + kthread_stop(pt1->kthread); + pt1_cleanup_tables(pt1); + pt1_cleanup_frontends(pt1); + pt1_disable_ram(pt1); + pt1->power = 0; + pt1->reset = 1; + pt1_update_power(pt1); + pt1_cleanup_adapters(pt1); + i2c_del_adapter(&pt1->i2c_adap); + pci_set_drvdata(pdev, NULL); + kfree(pt1); + pci_iounmap(pdev, regs); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static int pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret; + void __iomem *regs; + struct pt1 *pt1; + struct i2c_adapter *i2c_adap; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err; + + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + regs = pci_iomap(pdev, 0, 0); + if (!regs) { + ret = -EIO; + goto err_pci_release_regions; + } + + pt1 = kzalloc(sizeof(struct pt1), GFP_KERNEL); + if (!pt1) { + ret = -ENOMEM; + goto err_pci_iounmap; + } + + mutex_init(&pt1->lock); + pt1->pdev = pdev; + pt1->regs = regs; + pci_set_drvdata(pdev, pt1); + + ret = pt1_init_adapters(pt1); + if (ret < 0) + goto err_kfree; + + mutex_init(&pt1->lock); + + pt1->power = 0; + pt1->reset = 1; + pt1_update_power(pt1); + + i2c_adap = &pt1->i2c_adap; + i2c_adap->algo = &pt1_i2c_algo; + i2c_adap->algo_data = NULL; + i2c_adap->dev.parent = &pdev->dev; + strcpy(i2c_adap->name, DRIVER_NAME); + i2c_set_adapdata(i2c_adap, pt1); + ret = i2c_add_adapter(i2c_adap); + if (ret < 0) + goto err_pt1_cleanup_adapters; + + pt1_i2c_init(pt1); + pt1_i2c_wait(pt1); + + ret = pt1_sync(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + pt1_identify(pt1); + + ret = pt1_unlock(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_reset_pci(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_reset_ram(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_enable_ram(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + pt1_init_streams(pt1); + + pt1->power = 1; + pt1_update_power(pt1); + schedule_timeout_uninterruptible((HZ + 49) / 50); + + pt1->reset = 0; + pt1_update_power(pt1); + schedule_timeout_uninterruptible((HZ + 999) / 1000); + + ret = pt1_init_frontends(pt1); + if (ret < 0) + goto err_pt1_disable_ram; + + ret = pt1_init_tables(pt1); + if (ret < 0) + goto err_pt1_cleanup_frontends; + + return 0; + +err_pt1_cleanup_frontends: + pt1_cleanup_frontends(pt1); +err_pt1_disable_ram: + pt1_disable_ram(pt1); + pt1->power = 0; + pt1->reset = 1; + pt1_update_power(pt1); +err_i2c_del_adapter: + i2c_del_adapter(i2c_adap); +err_pt1_cleanup_adapters: + pt1_cleanup_adapters(pt1); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(pt1); +err_pci_iounmap: + pci_iounmap(pdev, regs); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err: + return ret; + +} + +static struct pci_device_id pt1_id_table[] = { + { PCI_DEVICE(0x10ee, 0x211a) }, + { PCI_DEVICE(0x10ee, 0x222a) }, + { }, +}; +MODULE_DEVICE_TABLE(pci, pt1_id_table); + +static struct pci_driver pt1_driver = { + .name = DRIVER_NAME, + .probe = pt1_probe, + .remove = pt1_remove, + .id_table = pt1_id_table, +}; + + +static int __init pt1_init(void) +{ + return pci_register_driver(&pt1_driver); +} + + +static void __exit pt1_cleanup(void) +{ + pci_unregister_driver(&pt1_driver); +} + +module_init(pt1_init); +module_exit(pt1_cleanup); + +MODULE_AUTHOR("Takahito HIRANO "); +MODULE_DESCRIPTION("Earthsoft PT1/PT2 Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/pt1/va1j5jf8007s.c b/drivers/media/pci/pt1/va1j5jf8007s.c new file mode 100644 index 00000000..1b637b74 --- /dev/null +++ b/drivers/media/pci/pt1/va1j5jf8007s.c @@ -0,0 +1,736 @@ +/* + * ISDB-S driver for VA1J5JF8007/VA1J5JF8011 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "va1j5jf8007s.h" + +enum va1j5jf8007s_tune_state { + VA1J5JF8007S_IDLE, + VA1J5JF8007S_SET_FREQUENCY_1, + VA1J5JF8007S_SET_FREQUENCY_2, + VA1J5JF8007S_SET_FREQUENCY_3, + VA1J5JF8007S_CHECK_FREQUENCY, + VA1J5JF8007S_SET_MODULATION, + VA1J5JF8007S_CHECK_MODULATION, + VA1J5JF8007S_SET_TS_ID, + VA1J5JF8007S_CHECK_TS_ID, + VA1J5JF8007S_TRACK, +}; + +struct va1j5jf8007s_state { + const struct va1j5jf8007s_config *config; + struct i2c_adapter *adap; + struct dvb_frontend fe; + enum va1j5jf8007s_tune_state tune_state; +}; + +static int va1j5jf8007s_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct va1j5jf8007s_state *state; + u8 addr; + int i; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + s32 word, x1, x2, x3, x4, x5, y; + + state = fe->demodulator_priv; + addr = state->config->demod_address; + + word = 0; + for (i = 0; i < 2; i++) { + write_buf[0] = 0xbc + i; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + word <<= 8; + word |= read_buf[0]; + } + + word -= 3000; + if (word < 0) + word = 0; + + x1 = int_sqrt(word << 16) * ((15625ll << 21) / 1000000); + x2 = (s64)x1 * x1 >> 31; + x3 = (s64)x2 * x1 >> 31; + x4 = (s64)x2 * x2 >> 31; + x5 = (s64)x4 * x1 >> 31; + + y = (58857ll << 23) / 1000; + y -= (s64)x1 * ((89565ll << 24) / 1000) >> 30; + y += (s64)x2 * ((88977ll << 24) / 1000) >> 28; + y -= (s64)x3 * ((50259ll << 25) / 1000) >> 27; + y += (s64)x4 * ((14341ll << 27) / 1000) >> 27; + y -= (s64)x5 * ((16346ll << 30) / 10000) >> 28; + + *snr = y < 0 ? 0 : y >> 15; + return 0; +} + +static int va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_HW; +} + +static int +va1j5jf8007s_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct va1j5jf8007s_state *state; + + state = fe->demodulator_priv; + + switch (state->tune_state) { + case VA1J5JF8007S_IDLE: + case VA1J5JF8007S_SET_FREQUENCY_1: + case VA1J5JF8007S_SET_FREQUENCY_2: + case VA1J5JF8007S_SET_FREQUENCY_3: + case VA1J5JF8007S_CHECK_FREQUENCY: + *status = 0; + return 0; + + + case VA1J5JF8007S_SET_MODULATION: + case VA1J5JF8007S_CHECK_MODULATION: + *status |= FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_SET_TS_ID: + case VA1J5JF8007S_CHECK_TS_ID: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + + case VA1J5JF8007S_TRACK: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +struct va1j5jf8007s_cb_map { + u32 frequency; + u8 cb; +}; + +static const struct va1j5jf8007s_cb_map va1j5jf8007s_cb_maps[] = { + { 986000, 0xb2 }, + { 1072000, 0xd2 }, + { 1154000, 0xe2 }, + { 1291000, 0x20 }, + { 1447000, 0x40 }, + { 1615000, 0x60 }, + { 1791000, 0x80 }, + { 1972000, 0xa0 }, +}; + +static u8 va1j5jf8007s_lookup_cb(u32 frequency) +{ + int i; + const struct va1j5jf8007s_cb_map *map; + + for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_cb_maps); i++) { + map = &va1j5jf8007s_cb_maps[i]; + if (frequency < map->frequency) + return map->cb; + } + return 0xc0; +} + +static int va1j5jf8007s_set_frequency_1(struct va1j5jf8007s_state *state) +{ + u32 frequency; + u16 word; + u8 buf[6]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + word = (frequency + 500) / 1000; + if (frequency < 1072000) + word = (word << 1 & ~0x1f) | (word & 0x0f); + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0x40 | word >> 8; + buf[3] = word; + buf[4] = 0xe0; + buf[5] = va1j5jf8007s_lookup_cb(frequency); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_frequency_2(struct va1j5jf8007s_state *state) +{ + u8 buf[3]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xe4; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_frequency_3(struct va1j5jf8007s_state *state) +{ + u32 frequency; + u8 buf[4]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xf4; + buf[3] = va1j5jf8007s_lookup_cb(frequency) | 0x4; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_frequency(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[2], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xfe; + write_buf[1] = 0xc1; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = read_buf[0] & 0x40; + return 0; +} + +static int va1j5jf8007s_set_modulation(struct va1j5jf8007s_state *state) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x03; + buf[1] = 0x01; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_modulation(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xc3; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = !(read_buf[0] & 0x10); + return 0; +} + +static int +va1j5jf8007s_set_ts_id(struct va1j5jf8007s_state *state) +{ + u32 ts_id; + u8 buf[3]; + struct i2c_msg msg; + + ts_id = state->fe.dtv_property_cache.stream_id; + if (!ts_id || ts_id == NO_STREAM_ID_FILTER) + return 0; + + buf[0] = 0x8f; + buf[1] = ts_id >> 8; + buf[2] = ts_id; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_ts_id(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[1], read_buf[2]; + struct i2c_msg msgs[2]; + u32 ts_id; + + ts_id = state->fe.dtv_property_cache.stream_id; + if (!ts_id || ts_id == NO_STREAM_ID_FILTER) { + *lock = 1; + return 0; + } + + addr = state->config->demod_address; + + write_buf[0] = 0xe6; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = (read_buf[0] << 8 | read_buf[1]) == ts_id; + return 0; +} + +static int +va1j5jf8007s_tune(struct dvb_frontend *fe, + bool re_tune, + unsigned int mode_flags, unsigned int *delay, + fe_status_t *status) +{ + struct va1j5jf8007s_state *state; + int ret; + int lock = 0; + + state = fe->demodulator_priv; + + if (re_tune) + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_1; + + switch (state->tune_state) { + case VA1J5JF8007S_IDLE: + *delay = 3 * HZ; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_1: + ret = va1j5jf8007s_set_frequency_1(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_2; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_2: + ret = va1j5jf8007s_set_frequency_2(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_3; + *delay = (HZ + 99) / 100; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_3: + ret = va1j5jf8007s_set_frequency_3(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_FREQUENCY; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007S_CHECK_FREQUENCY: + ret = va1j5jf8007s_check_frequency(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 999) / 1000; + *status = 0; + return 0; + } + + state->tune_state = VA1J5JF8007S_SET_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_SET_MODULATION: + ret = va1j5jf8007s_set_modulation(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_CHECK_MODULATION: + ret = va1j5jf8007s_check_modulation(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 49) / 50; + *status = FE_HAS_SIGNAL; + return 0; + } + + state->tune_state = VA1J5JF8007S_SET_TS_ID; + *delay = 0; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + + case VA1J5JF8007S_SET_TS_ID: + ret = va1j5jf8007s_set_ts_id(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_TS_ID; + return 0; + + case VA1J5JF8007S_CHECK_TS_ID: + ret = va1j5jf8007s_check_ts_id(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 99) / 100; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + } + + state->tune_state = VA1J5JF8007S_TRACK; + /* fall through */ + + case VA1J5JF8007S_TRACK: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +static int va1j5jf8007s_init_frequency(struct va1j5jf8007s_state *state) +{ + u8 buf[4]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xf0; + buf[3] = 0x04; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_sleep(struct va1j5jf8007s_state *state, int sleep) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x17; + buf[1] = sleep ? 0x01 : 0x00; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_sleep(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007s_init_frequency(state); + if (ret < 0) + return ret; + + return va1j5jf8007s_set_sleep(state, 1); +} + +static int va1j5jf8007s_init(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + + state = fe->demodulator_priv; + state->tune_state = VA1J5JF8007S_IDLE; + + return va1j5jf8007s_set_sleep(state, 0); +} + +static void va1j5jf8007s_release(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops va1j5jf8007s_ops = { + .delsys = { SYS_ISDBS }, + .info = { + .name = "VA1J5JF8007/VA1J5JF8011 ISDB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO | + FE_CAN_MULTISTREAM, + }, + + .read_snr = va1j5jf8007s_read_snr, + .get_frontend_algo = va1j5jf8007s_get_frontend_algo, + .read_status = va1j5jf8007s_read_status, + .tune = va1j5jf8007s_tune, + .sleep = va1j5jf8007s_sleep, + .init = va1j5jf8007s_init, + .release = va1j5jf8007s_release, +}; + +static int va1j5jf8007s_prepare_1(struct va1j5jf8007s_state *state) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0x07; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + if (read_buf[0] != 0x41) + return -EIO; + + return 0; +} + +static const u8 va1j5jf8007s_20mhz_prepare_bufs[][2] = { + {0x04, 0x02}, {0x0d, 0x55}, {0x11, 0x40}, {0x13, 0x80}, {0x17, 0x01}, + {0x1c, 0x0a}, {0x1d, 0xaa}, {0x1e, 0x20}, {0x1f, 0x88}, {0x51, 0xb0}, + {0x52, 0x89}, {0x53, 0xb3}, {0x5a, 0x2d}, {0x5b, 0xd3}, {0x85, 0x69}, + {0x87, 0x04}, {0x8e, 0x02}, {0xa3, 0xf7}, {0xa5, 0xc0}, +}; + +static const u8 va1j5jf8007s_25mhz_prepare_bufs[][2] = { + {0x04, 0x02}, {0x11, 0x40}, {0x13, 0x80}, {0x17, 0x01}, {0x1c, 0x0a}, + {0x1d, 0xaa}, {0x1e, 0x20}, {0x1f, 0x88}, {0x51, 0xb0}, {0x52, 0x89}, + {0x53, 0xb3}, {0x5a, 0x2d}, {0x5b, 0xd3}, {0x85, 0x69}, {0x87, 0x04}, + {0x8e, 0x26}, {0xa3, 0xf7}, {0xa5, 0xc0}, +}; + +static int va1j5jf8007s_prepare_2(struct va1j5jf8007s_state *state) +{ + const u8 (*bufs)[2]; + int size; + u8 addr; + u8 buf[2]; + struct i2c_msg msg; + int i; + + switch (state->config->frequency) { + case VA1J5JF8007S_20MHZ: + bufs = va1j5jf8007s_20mhz_prepare_bufs; + size = ARRAY_SIZE(va1j5jf8007s_20mhz_prepare_bufs); + break; + case VA1J5JF8007S_25MHZ: + bufs = va1j5jf8007s_25mhz_prepare_bufs; + size = ARRAY_SIZE(va1j5jf8007s_25mhz_prepare_bufs); + break; + default: + return -EINVAL; + } + + addr = state->config->demod_address; + + msg.addr = addr; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + for (i = 0; i < size; i++) { + memcpy(buf, bufs[i], sizeof(buf)); + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + } + + return 0; +} + +/* must be called after va1j5jf8007t_attach */ +int va1j5jf8007s_prepare(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007s_prepare_1(state); + if (ret < 0) + return ret; + + ret = va1j5jf8007s_prepare_2(state); + if (ret < 0) + return ret; + + return va1j5jf8007s_init_frequency(state); +} + +struct dvb_frontend * +va1j5jf8007s_attach(const struct va1j5jf8007s_config *config, + struct i2c_adapter *adap) +{ + struct va1j5jf8007s_state *state; + struct dvb_frontend *fe; + u8 buf[2]; + struct i2c_msg msg; + + state = kzalloc(sizeof(struct va1j5jf8007s_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->adap = adap; + + fe = &state->fe; + memcpy(&fe->ops, &va1j5jf8007s_ops, sizeof(struct dvb_frontend_ops)); + fe->demodulator_priv = state; + + buf[0] = 0x01; + buf[1] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) { + kfree(state); + return NULL; + } + + return fe; +} diff --git a/drivers/media/pci/pt1/va1j5jf8007s.h b/drivers/media/pci/pt1/va1j5jf8007s.h new file mode 100644 index 00000000..b7d6f05a --- /dev/null +++ b/drivers/media/pci/pt1/va1j5jf8007s.h @@ -0,0 +1,46 @@ +/* + * ISDB-S driver for VA1J5JF8007/VA1J5JF8011 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef VA1J5JF8007S_H +#define VA1J5JF8007S_H + +enum va1j5jf8007s_frequency { + VA1J5JF8007S_20MHZ, + VA1J5JF8007S_25MHZ, +}; + +struct va1j5jf8007s_config { + u8 demod_address; + enum va1j5jf8007s_frequency frequency; +}; + +struct i2c_adapter; + +struct dvb_frontend * +va1j5jf8007s_attach(const struct va1j5jf8007s_config *config, + struct i2c_adapter *adap); + +/* must be called after va1j5jf8007t_attach */ +int va1j5jf8007s_prepare(struct dvb_frontend *fe); + +#endif diff --git a/drivers/media/pci/pt1/va1j5jf8007t.c b/drivers/media/pci/pt1/va1j5jf8007t.c new file mode 100644 index 00000000..2db15159 --- /dev/null +++ b/drivers/media/pci/pt1/va1j5jf8007t.c @@ -0,0 +1,536 @@ +/* + * ISDB-T driver for VA1J5JF8007/VA1J5JF8011 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "va1j5jf8007t.h" + +enum va1j5jf8007t_tune_state { + VA1J5JF8007T_IDLE, + VA1J5JF8007T_SET_FREQUENCY, + VA1J5JF8007T_CHECK_FREQUENCY, + VA1J5JF8007T_SET_MODULATION, + VA1J5JF8007T_CHECK_MODULATION, + VA1J5JF8007T_TRACK, + VA1J5JF8007T_ABORT, +}; + +struct va1j5jf8007t_state { + const struct va1j5jf8007t_config *config; + struct i2c_adapter *adap; + struct dvb_frontend fe; + enum va1j5jf8007t_tune_state tune_state; +}; + +static int va1j5jf8007t_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct va1j5jf8007t_state *state; + u8 addr; + int i; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + s32 word, x, y; + + state = fe->demodulator_priv; + addr = state->config->demod_address; + + word = 0; + for (i = 0; i < 3; i++) { + write_buf[0] = 0x8b + i; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + word <<= 8; + word |= read_buf[0]; + } + + if (!word) + return -EIO; + + x = 10 * (intlog10(0x540000 * 100 / word) - (2 << 24)); + y = (24ll << 46) / 1000000; + y = ((s64)y * x >> 30) - (16ll << 40) / 10000; + y = ((s64)y * x >> 29) + (398ll << 35) / 10000; + y = ((s64)y * x >> 30) + (5491ll << 29) / 10000; + y = ((s64)y * x >> 30) + (30965ll << 23) / 10000; + *snr = y >> 15; + return 0; +} + +static int va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_HW; +} + +static int +va1j5jf8007t_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct va1j5jf8007t_state *state; + + state = fe->demodulator_priv; + + switch (state->tune_state) { + case VA1J5JF8007T_IDLE: + case VA1J5JF8007T_SET_FREQUENCY: + case VA1J5JF8007T_CHECK_FREQUENCY: + *status = 0; + return 0; + + + case VA1J5JF8007T_SET_MODULATION: + case VA1J5JF8007T_CHECK_MODULATION: + case VA1J5JF8007T_ABORT: + *status |= FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_TRACK: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +struct va1j5jf8007t_cb_map { + u32 frequency; + u8 cb; +}; + +static const struct va1j5jf8007t_cb_map va1j5jf8007t_cb_maps[] = { + { 90000000, 0x80 }, + { 140000000, 0x81 }, + { 170000000, 0xa1 }, + { 220000000, 0x62 }, + { 330000000, 0xa2 }, + { 402000000, 0xe2 }, + { 450000000, 0x64 }, + { 550000000, 0x84 }, + { 600000000, 0xa4 }, + { 700000000, 0xc4 }, +}; + +static u8 va1j5jf8007t_lookup_cb(u32 frequency) +{ + int i; + const struct va1j5jf8007t_cb_map *map; + + for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_cb_maps); i++) { + map = &va1j5jf8007t_cb_maps[i]; + if (frequency < map->frequency) + return map->cb; + } + return 0xe4; +} + +static int va1j5jf8007t_set_frequency(struct va1j5jf8007t_state *state) +{ + u32 frequency; + u16 word; + u8 buf[6]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + word = (frequency + 71428) / 142857 + 399; + buf[0] = 0xfe; + buf[1] = 0xc2; + buf[2] = word >> 8; + buf[3] = word; + buf[4] = 0x80; + buf[5] = va1j5jf8007t_lookup_cb(frequency); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007t_check_frequency(struct va1j5jf8007t_state *state, int *lock) +{ + u8 addr; + u8 write_buf[2], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xfe; + write_buf[1] = 0xc3; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = read_buf[0] & 0x40; + return 0; +} + +static int va1j5jf8007t_set_modulation(struct va1j5jf8007t_state *state) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x01; + buf[1] = 0x40; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_check_modulation(struct va1j5jf8007t_state *state, + int *lock, int *retry) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0x80; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = !(read_buf[0] & 0x10); + *retry = read_buf[0] & 0x80; + return 0; +} + +static int +va1j5jf8007t_tune(struct dvb_frontend *fe, + bool re_tune, + unsigned int mode_flags, unsigned int *delay, + fe_status_t *status) +{ + struct va1j5jf8007t_state *state; + int ret; + int lock = 0, retry = 0; + + state = fe->demodulator_priv; + + if (re_tune) + state->tune_state = VA1J5JF8007T_SET_FREQUENCY; + + switch (state->tune_state) { + case VA1J5JF8007T_IDLE: + *delay = 3 * HZ; + *status = 0; + return 0; + + case VA1J5JF8007T_SET_FREQUENCY: + ret = va1j5jf8007t_set_frequency(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007T_CHECK_FREQUENCY; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007T_CHECK_FREQUENCY: + ret = va1j5jf8007t_check_frequency(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 999) / 1000; + *status = 0; + return 0; + } + + state->tune_state = VA1J5JF8007T_SET_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_SET_MODULATION: + ret = va1j5jf8007t_set_modulation(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007T_CHECK_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_CHECK_MODULATION: + ret = va1j5jf8007t_check_modulation(state, &lock, &retry); + if (ret < 0) + return ret; + + if (!lock) { + if (!retry) { + state->tune_state = VA1J5JF8007T_ABORT; + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL; + return 0; + } + *delay = (HZ + 999) / 1000; + *status = FE_HAS_SIGNAL; + return 0; + } + + state->tune_state = VA1J5JF8007T_TRACK; + /* fall through */ + + case VA1J5JF8007T_TRACK: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + + case VA1J5JF8007T_ABORT: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL; + return 0; + } + + BUG(); +} + +static int va1j5jf8007t_init_frequency(struct va1j5jf8007t_state *state) +{ + u8 buf[7]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x8f; + buf[4] = 0xc1; + buf[5] = 0x80; + buf[6] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_set_sleep(struct va1j5jf8007t_state *state, int sleep) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x03; + buf[1] = sleep ? 0x90 : 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_sleep(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007t_init_frequency(state); + if (ret < 0) + return ret; + + return va1j5jf8007t_set_sleep(state, 1); +} + +static int va1j5jf8007t_init(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + + state = fe->demodulator_priv; + state->tune_state = VA1J5JF8007T_IDLE; + + return va1j5jf8007t_set_sleep(state, 0); +} + +static void va1j5jf8007t_release(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops va1j5jf8007t_ops = { + .delsys = { SYS_ISDBT }, + .info = { + .name = "VA1J5JF8007/VA1J5JF8011 ISDB-T", + .frequency_min = 90000000, + .frequency_max = 770000000, + .frequency_stepsize = 142857, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO, + }, + + .read_snr = va1j5jf8007t_read_snr, + .get_frontend_algo = va1j5jf8007t_get_frontend_algo, + .read_status = va1j5jf8007t_read_status, + .tune = va1j5jf8007t_tune, + .sleep = va1j5jf8007t_sleep, + .init = va1j5jf8007t_init, + .release = va1j5jf8007t_release, +}; + +static const u8 va1j5jf8007t_20mhz_prepare_bufs[][2] = { + {0x03, 0x90}, {0x14, 0x8f}, {0x1c, 0x2a}, {0x1d, 0xa8}, {0x1e, 0xa2}, + {0x22, 0x83}, {0x31, 0x0d}, {0x32, 0xe0}, {0x39, 0xd3}, {0x3a, 0x00}, + {0x5c, 0x40}, {0x5f, 0x80}, {0x75, 0x02}, {0x76, 0x4e}, {0x77, 0x03}, + {0xef, 0x01} +}; + +static const u8 va1j5jf8007t_25mhz_prepare_bufs[][2] = { + {0x03, 0x90}, {0x1c, 0x2a}, {0x1d, 0xa8}, {0x1e, 0xa2}, {0x22, 0x83}, + {0x3a, 0x00}, {0x5c, 0x40}, {0x5f, 0x80}, {0x75, 0x0a}, {0x76, 0x4c}, + {0x77, 0x03}, {0xef, 0x01} +}; + +int va1j5jf8007t_prepare(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + const u8 (*bufs)[2]; + int size; + u8 buf[2]; + struct i2c_msg msg; + int i; + + state = fe->demodulator_priv; + + switch (state->config->frequency) { + case VA1J5JF8007T_20MHZ: + bufs = va1j5jf8007t_20mhz_prepare_bufs; + size = ARRAY_SIZE(va1j5jf8007t_20mhz_prepare_bufs); + break; + case VA1J5JF8007T_25MHZ: + bufs = va1j5jf8007t_25mhz_prepare_bufs; + size = ARRAY_SIZE(va1j5jf8007t_25mhz_prepare_bufs); + break; + default: + return -EINVAL; + } + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + for (i = 0; i < size; i++) { + memcpy(buf, bufs[i], sizeof(buf)); + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + } + + return va1j5jf8007t_init_frequency(state); +} + +struct dvb_frontend * +va1j5jf8007t_attach(const struct va1j5jf8007t_config *config, + struct i2c_adapter *adap) +{ + struct va1j5jf8007t_state *state; + struct dvb_frontend *fe; + u8 buf[2]; + struct i2c_msg msg; + + state = kzalloc(sizeof(struct va1j5jf8007t_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->adap = adap; + + fe = &state->fe; + memcpy(&fe->ops, &va1j5jf8007t_ops, sizeof(struct dvb_frontend_ops)); + fe->demodulator_priv = state; + + buf[0] = 0x01; + buf[1] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) { + kfree(state); + return NULL; + } + + return fe; +} diff --git a/drivers/media/pci/pt1/va1j5jf8007t.h b/drivers/media/pci/pt1/va1j5jf8007t.h new file mode 100644 index 00000000..2903be51 --- /dev/null +++ b/drivers/media/pci/pt1/va1j5jf8007t.h @@ -0,0 +1,46 @@ +/* + * ISDB-T driver for VA1J5JF8007/VA1J5JF8011 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef VA1J5JF8007T_H +#define VA1J5JF8007T_H + +enum va1j5jf8007t_frequency { + VA1J5JF8007T_20MHZ, + VA1J5JF8007T_25MHZ, +}; + +struct va1j5jf8007t_config { + u8 demod_address; + enum va1j5jf8007t_frequency frequency; +}; + +struct i2c_adapter; + +struct dvb_frontend * +va1j5jf8007t_attach(const struct va1j5jf8007t_config *config, + struct i2c_adapter *adap); + +/* must be called after va1j5jf8007s_attach */ +int va1j5jf8007t_prepare(struct dvb_frontend *fe); + +#endif diff --git a/drivers/media/pci/saa7134/Kconfig b/drivers/media/pci/saa7134/Kconfig new file mode 100644 index 00000000..15b90d6e --- /dev/null +++ b/drivers/media/pci/saa7134/Kconfig @@ -0,0 +1,64 @@ +config VIDEO_SAA7134 + tristate "Philips SAA7134 support" + depends on VIDEO_DEV && PCI && I2C + select VIDEOBUF_DMA_SG + select VIDEO_TUNER + select VIDEO_TVEEPROM + select CRC32 + select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This is a video4linux driver for Philips SAA713x based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called saa7134. + +config VIDEO_SAA7134_ALSA + tristate "Philips SAA7134 DMA audio support" + depends on VIDEO_SAA7134 && SND + select SND_PCM + ---help--- + This is a video4linux driver for direct (DMA) audio in + Philips SAA713x based TV cards using ALSA + + To compile this driver as a module, choose M here: the + module will be called saa7134-alsa. + +config VIDEO_SAA7134_RC + bool "Philips SAA7134 Remote Controller support" + depends on RC_CORE + depends on VIDEO_SAA7134 + depends on !(RC_CORE=m && VIDEO_SAA7134=y) + default y + ---help--- + Enables Remote Controller support on saa7134 driver. + +config VIDEO_SAA7134_DVB + tristate "DVB/ATSC Support for saa7134 based TV cards" + depends on VIDEO_SAA7134 && DVB_CORE + select VIDEOBUF_DVB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6405 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10036 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This adds support for DVB cards based on the + Philips saa7134 chip. + + To compile this driver as a module, choose M here: the + module will be called saa7134-dvb. diff --git a/drivers/media/pci/saa7134/Makefile b/drivers/media/pci/saa7134/Makefile new file mode 100644 index 00000000..35375480 --- /dev/null +++ b/drivers/media/pci/saa7134/Makefile @@ -0,0 +1,16 @@ + +saa7134-y += saa7134-cards.o saa7134-core.o saa7134-i2c.o +saa7134-y += saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o +saa7134-y += saa7134-video.o +saa7134-$(CONFIG_VIDEO_SAA7134_RC) += saa7134-input.o + +obj-$(CONFIG_VIDEO_SAA7134) += saa6752hs.o saa7134.o saa7134-empress.o + +obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o + +obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o + +ccflags-y += -I$(srctree)/drivers/media/i2c +ccflags-y += -I$(srctree)/drivers/media/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends diff --git a/drivers/media/pci/saa7134/saa6752hs.c b/drivers/media/pci/saa7134/saa6752hs.c new file mode 100644 index 00000000..f147b05b --- /dev/null +++ b/drivers/media/pci/saa7134/saa6752hs.c @@ -0,0 +1,1012 @@ + /* + saa6752hs - i2c-driver for the saa6752hs by Philips + + Copyright (C) 2004 Andrew de Quincey + + AC-3 support: + + Copyright (C) 2008 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License vs published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MPEG_VIDEO_TARGET_BITRATE_MAX 27000 +#define MPEG_VIDEO_MAX_BITRATE_MAX 27000 +#define MPEG_TOTAL_TARGET_BITRATE_MAX 27000 +#define MPEG_PID_MAX ((1 << 14) - 1) + + +MODULE_DESCRIPTION("device driver for saa6752hs MPEG2 encoder"); +MODULE_AUTHOR("Andrew de Quincey"); +MODULE_LICENSE("GPL"); + +enum saa6752hs_videoformat { + SAA6752HS_VF_D1 = 0, /* standard D1 video format: 720x576 */ + SAA6752HS_VF_2_3_D1 = 1,/* 2/3D1 video format: 480x576 */ + SAA6752HS_VF_1_2_D1 = 2,/* 1/2D1 video format: 352x576 */ + SAA6752HS_VF_SIF = 3, /* SIF video format: 352x288 */ + SAA6752HS_VF_UNKNOWN, +}; + +struct saa6752hs_mpeg_params { + /* transport streams */ + __u16 ts_pid_pmt; + __u16 ts_pid_audio; + __u16 ts_pid_video; + __u16 ts_pid_pcr; + + /* audio */ + enum v4l2_mpeg_audio_encoding au_encoding; + enum v4l2_mpeg_audio_l2_bitrate au_l2_bitrate; + enum v4l2_mpeg_audio_ac3_bitrate au_ac3_bitrate; + + /* video */ + enum v4l2_mpeg_video_aspect vi_aspect; + enum v4l2_mpeg_video_bitrate_mode vi_bitrate_mode; + __u32 vi_bitrate; + __u32 vi_bitrate_peak; +}; + +static const struct v4l2_format v4l2_format_table[] = +{ + [SAA6752HS_VF_D1] = + { .fmt = { .pix = { .width = 720, .height = 576 }}}, + [SAA6752HS_VF_2_3_D1] = + { .fmt = { .pix = { .width = 480, .height = 576 }}}, + [SAA6752HS_VF_1_2_D1] = + { .fmt = { .pix = { .width = 352, .height = 576 }}}, + [SAA6752HS_VF_SIF] = + { .fmt = { .pix = { .width = 352, .height = 288 }}}, + [SAA6752HS_VF_UNKNOWN] = + { .fmt = { .pix = { .width = 0, .height = 0}}}, +}; + +struct saa6752hs_state { + struct v4l2_subdev sd; + int chip; + u32 revision; + int has_ac3; + struct saa6752hs_mpeg_params params; + enum saa6752hs_videoformat video_format; + v4l2_std_id standard; +}; + +enum saa6752hs_command { + SAA6752HS_COMMAND_RESET = 0, + SAA6752HS_COMMAND_STOP = 1, + SAA6752HS_COMMAND_START = 2, + SAA6752HS_COMMAND_PAUSE = 3, + SAA6752HS_COMMAND_RECONFIGURE = 4, + SAA6752HS_COMMAND_SLEEP = 5, + SAA6752HS_COMMAND_RECONFIGURE_FORCE = 6, + + SAA6752HS_COMMAND_MAX +}; + +static inline struct saa6752hs_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa6752hs_state, sd); +} + +/* ---------------------------------------------------------------------- */ + +static u8 PAT[] = { + 0xc2, /* i2c register */ + 0x00, /* table number for encoder */ + + 0x47, /* sync */ + 0x40, 0x00, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid(0) */ + 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ + + 0x00, /* PSI pointer to start of table */ + + 0x00, /* tid(0) */ + 0xb0, 0x0d, /* section_syntax_indicator(1), section_length(13) */ + + 0x00, 0x01, /* transport_stream_id(1) */ + + 0xc1, /* version_number(0), current_next_indicator(1) */ + + 0x00, 0x00, /* section_number(0), last_section_number(0) */ + + 0x00, 0x01, /* program_number(1) */ + + 0xe0, 0x00, /* PMT PID */ + + 0x00, 0x00, 0x00, 0x00 /* CRC32 */ +}; + +static u8 PMT[] = { + 0xc2, /* i2c register */ + 0x01, /* table number for encoder */ + + 0x47, /* sync */ + 0x40, 0x00, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid */ + 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ + + 0x00, /* PSI pointer to start of table */ + + 0x02, /* tid(2) */ + 0xb0, 0x17, /* section_syntax_indicator(1), section_length(23) */ + + 0x00, 0x01, /* program_number(1) */ + + 0xc1, /* version_number(0), current_next_indicator(1) */ + + 0x00, 0x00, /* section_number(0), last_section_number(0) */ + + 0xe0, 0x00, /* PCR_PID */ + + 0xf0, 0x00, /* program_info_length(0) */ + + 0x02, 0xe0, 0x00, 0xf0, 0x00, /* video stream type(2), pid */ + 0x04, 0xe0, 0x00, 0xf0, 0x00, /* audio stream type(4), pid */ + + 0x00, 0x00, 0x00, 0x00 /* CRC32 */ +}; + +static u8 PMT_AC3[] = { + 0xc2, /* i2c register */ + 0x01, /* table number for encoder(1) */ + 0x47, /* sync */ + + 0x40, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0) */ + 0x10, /* PMT PID (0x0010) */ + 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ + + 0x00, /* PSI pointer to start of table */ + + 0x02, /* TID (2) */ + 0xb0, 0x1a, /* section_syntax_indicator(1), section_length(26) */ + + 0x00, 0x01, /* program_number(1) */ + + 0xc1, /* version_number(0), current_next_indicator(1) */ + + 0x00, 0x00, /* section_number(0), last_section_number(0) */ + + 0xe1, 0x04, /* PCR_PID (0x0104) */ + + 0xf0, 0x00, /* program_info_length(0) */ + + 0x02, 0xe1, 0x00, 0xf0, 0x00, /* video stream type(2), pid */ + 0x06, 0xe1, 0x03, 0xf0, 0x03, /* audio stream type(6), pid */ + 0x6a, /* AC3 */ + 0x01, /* Descriptor_length(1) */ + 0x00, /* component_type_flag(0), bsid_flag(0), mainid_flag(0), asvc_flag(0), reserved flags(0) */ + + 0xED, 0xDE, 0x2D, 0xF3 /* CRC32 BE */ +}; + +static struct saa6752hs_mpeg_params param_defaults = +{ + .ts_pid_pmt = 16, + .ts_pid_video = 260, + .ts_pid_audio = 256, + .ts_pid_pcr = 259, + + .vi_aspect = V4L2_MPEG_VIDEO_ASPECT_4x3, + .vi_bitrate = 4000, + .vi_bitrate_peak = 6000, + .vi_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + + .au_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + .au_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_256K, + .au_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_256K, +}; + +/* ---------------------------------------------------------------------- */ + +static int saa6752hs_chip_command(struct i2c_client *client, + enum saa6752hs_command command) +{ + unsigned char buf[3]; + unsigned long timeout; + int status = 0; + + /* execute the command */ + switch(command) { + case SAA6752HS_COMMAND_RESET: + buf[0] = 0x00; + break; + + case SAA6752HS_COMMAND_STOP: + buf[0] = 0x03; + break; + + case SAA6752HS_COMMAND_START: + buf[0] = 0x02; + break; + + case SAA6752HS_COMMAND_PAUSE: + buf[0] = 0x04; + break; + + case SAA6752HS_COMMAND_RECONFIGURE: + buf[0] = 0x05; + break; + + case SAA6752HS_COMMAND_SLEEP: + buf[0] = 0x06; + break; + + case SAA6752HS_COMMAND_RECONFIGURE_FORCE: + buf[0] = 0x07; + break; + + default: + return -EINVAL; + } + + /* set it and wait for it to be so */ + i2c_master_send(client, buf, 1); + timeout = jiffies + HZ * 3; + for (;;) { + /* get the current status */ + buf[0] = 0x10; + i2c_master_send(client, buf, 1); + i2c_master_recv(client, buf, 1); + + if (!(buf[0] & 0x20)) + break; + if (time_after(jiffies,timeout)) { + status = -ETIMEDOUT; + break; + } + + msleep(10); + } + + /* delay a bit to let encoder settle */ + msleep(50); + + return status; +} + + +static inline void set_reg8(struct i2c_client *client, uint8_t reg, uint8_t val) +{ + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + i2c_master_send(client, buf, 2); +} + +static inline void set_reg16(struct i2c_client *client, uint8_t reg, uint16_t val) +{ + u8 buf[3]; + + buf[0] = reg; + buf[1] = val >> 8; + buf[2] = val & 0xff; + i2c_master_send(client, buf, 3); +} + +static int saa6752hs_set_bitrate(struct i2c_client *client, + struct saa6752hs_state *h) +{ + struct saa6752hs_mpeg_params *params = &h->params; + int tot_bitrate; + int is_384k; + + /* set the bitrate mode */ + set_reg8(client, 0x71, + params->vi_bitrate_mode != V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); + + /* set the video bitrate */ + if (params->vi_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) { + /* set the target bitrate */ + set_reg16(client, 0x80, params->vi_bitrate); + + /* set the max bitrate */ + set_reg16(client, 0x81, params->vi_bitrate_peak); + tot_bitrate = params->vi_bitrate_peak; + } else { + /* set the target bitrate (no max bitrate for CBR) */ + set_reg16(client, 0x81, params->vi_bitrate); + tot_bitrate = params->vi_bitrate; + } + + /* set the audio encoding */ + set_reg8(client, 0x93, + params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3); + + /* set the audio bitrate */ + if (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) + is_384k = V4L2_MPEG_AUDIO_AC3_BITRATE_384K == params->au_ac3_bitrate; + else + is_384k = V4L2_MPEG_AUDIO_L2_BITRATE_384K == params->au_l2_bitrate; + set_reg8(client, 0x94, is_384k); + tot_bitrate += is_384k ? 384 : 256; + + /* Note: the total max bitrate is determined by adding the video and audio + bitrates together and also adding an extra 768kbit/s to stay on the + safe side. If more control should be required, then an extra MPEG control + should be added. */ + tot_bitrate += 768; + if (tot_bitrate > MPEG_TOTAL_TARGET_BITRATE_MAX) + tot_bitrate = MPEG_TOTAL_TARGET_BITRATE_MAX; + + /* set the total bitrate */ + set_reg16(client, 0xb1, tot_bitrate); + return 0; +} + + +static int get_ctrl(int has_ac3, struct saa6752hs_mpeg_params *params, + struct v4l2_ext_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_MPEG_STREAM_TYPE: + ctrl->value = V4L2_MPEG_STREAM_TYPE_MPEG2_TS; + break; + case V4L2_CID_MPEG_STREAM_PID_PMT: + ctrl->value = params->ts_pid_pmt; + break; + case V4L2_CID_MPEG_STREAM_PID_AUDIO: + ctrl->value = params->ts_pid_audio; + break; + case V4L2_CID_MPEG_STREAM_PID_VIDEO: + ctrl->value = params->ts_pid_video; + break; + case V4L2_CID_MPEG_STREAM_PID_PCR: + ctrl->value = params->ts_pid_pcr; + break; + case V4L2_CID_MPEG_AUDIO_ENCODING: + ctrl->value = params->au_encoding; + break; + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + ctrl->value = params->au_l2_bitrate; + break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!has_ac3) + return -EINVAL; + ctrl->value = params->au_ac3_bitrate; + break; + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + ctrl->value = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000; + break; + case V4L2_CID_MPEG_VIDEO_ENCODING: + ctrl->value = V4L2_MPEG_VIDEO_ENCODING_MPEG_2; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + ctrl->value = params->vi_aspect; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + ctrl->value = params->vi_bitrate * 1000; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + ctrl->value = params->vi_bitrate_peak * 1000; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + ctrl->value = params->vi_bitrate_mode; + break; + default: + return -EINVAL; + } + return 0; +} + +static int handle_ctrl(int has_ac3, struct saa6752hs_mpeg_params *params, + struct v4l2_ext_control *ctrl, int set) +{ + int old = 0, new; + + new = ctrl->value; + switch (ctrl->id) { + case V4L2_CID_MPEG_STREAM_TYPE: + old = V4L2_MPEG_STREAM_TYPE_MPEG2_TS; + if (set && new != old) + return -ERANGE; + new = old; + break; + case V4L2_CID_MPEG_STREAM_PID_PMT: + old = params->ts_pid_pmt; + if (set && new > MPEG_PID_MAX) + return -ERANGE; + if (new > MPEG_PID_MAX) + new = MPEG_PID_MAX; + params->ts_pid_pmt = new; + break; + case V4L2_CID_MPEG_STREAM_PID_AUDIO: + old = params->ts_pid_audio; + if (set && new > MPEG_PID_MAX) + return -ERANGE; + if (new > MPEG_PID_MAX) + new = MPEG_PID_MAX; + params->ts_pid_audio = new; + break; + case V4L2_CID_MPEG_STREAM_PID_VIDEO: + old = params->ts_pid_video; + if (set && new > MPEG_PID_MAX) + return -ERANGE; + if (new > MPEG_PID_MAX) + new = MPEG_PID_MAX; + params->ts_pid_video = new; + break; + case V4L2_CID_MPEG_STREAM_PID_PCR: + old = params->ts_pid_pcr; + if (set && new > MPEG_PID_MAX) + return -ERANGE; + if (new > MPEG_PID_MAX) + new = MPEG_PID_MAX; + params->ts_pid_pcr = new; + break; + case V4L2_CID_MPEG_AUDIO_ENCODING: + old = params->au_encoding; + if (set && new != V4L2_MPEG_AUDIO_ENCODING_LAYER_2 && + (!has_ac3 || new != V4L2_MPEG_AUDIO_ENCODING_AC3)) + return -ERANGE; + params->au_encoding = new; + break; + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + old = params->au_l2_bitrate; + if (set && new != V4L2_MPEG_AUDIO_L2_BITRATE_256K && + new != V4L2_MPEG_AUDIO_L2_BITRATE_384K) + return -ERANGE; + if (new <= V4L2_MPEG_AUDIO_L2_BITRATE_256K) + new = V4L2_MPEG_AUDIO_L2_BITRATE_256K; + else + new = V4L2_MPEG_AUDIO_L2_BITRATE_384K; + params->au_l2_bitrate = new; + break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!has_ac3) + return -EINVAL; + old = params->au_ac3_bitrate; + if (set && new != V4L2_MPEG_AUDIO_AC3_BITRATE_256K && + new != V4L2_MPEG_AUDIO_AC3_BITRATE_384K) + return -ERANGE; + if (new <= V4L2_MPEG_AUDIO_AC3_BITRATE_256K) + new = V4L2_MPEG_AUDIO_AC3_BITRATE_256K; + else + new = V4L2_MPEG_AUDIO_AC3_BITRATE_384K; + params->au_ac3_bitrate = new; + break; + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + old = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000; + if (set && new != old) + return -ERANGE; + new = old; + break; + case V4L2_CID_MPEG_VIDEO_ENCODING: + old = V4L2_MPEG_VIDEO_ENCODING_MPEG_2; + if (set && new != old) + return -ERANGE; + new = old; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + old = params->vi_aspect; + if (set && new != V4L2_MPEG_VIDEO_ASPECT_16x9 && + new != V4L2_MPEG_VIDEO_ASPECT_4x3) + return -ERANGE; + if (new != V4L2_MPEG_VIDEO_ASPECT_16x9) + new = V4L2_MPEG_VIDEO_ASPECT_4x3; + params->vi_aspect = new; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + old = params->vi_bitrate * 1000; + new = 1000 * (new / 1000); + if (set && new > MPEG_VIDEO_TARGET_BITRATE_MAX * 1000) + return -ERANGE; + if (new > MPEG_VIDEO_TARGET_BITRATE_MAX * 1000) + new = MPEG_VIDEO_TARGET_BITRATE_MAX * 1000; + params->vi_bitrate = new / 1000; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + old = params->vi_bitrate_peak * 1000; + new = 1000 * (new / 1000); + if (set && new > MPEG_VIDEO_TARGET_BITRATE_MAX * 1000) + return -ERANGE; + if (new > MPEG_VIDEO_TARGET_BITRATE_MAX * 1000) + new = MPEG_VIDEO_TARGET_BITRATE_MAX * 1000; + params->vi_bitrate_peak = new / 1000; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + old = params->vi_bitrate_mode; + params->vi_bitrate_mode = new; + break; + default: + return -EINVAL; + } + ctrl->value = new; + return 0; +} + + +static int saa6752hs_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl) +{ + struct saa6752hs_state *h = to_state(sd); + struct saa6752hs_mpeg_params *params = &h->params; + int err; + + switch (qctrl->id) { + case V4L2_CID_MPEG_AUDIO_ENCODING: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + h->has_ac3 ? V4L2_MPEG_AUDIO_ENCODING_AC3 : + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_2); + + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_L2_BITRATE_256K, + V4L2_MPEG_AUDIO_L2_BITRATE_384K, 1, + V4L2_MPEG_AUDIO_L2_BITRATE_256K); + + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!h->has_ac3) + return -EINVAL; + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_AC3_BITRATE_256K, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K, 1, + V4L2_MPEG_AUDIO_AC3_BITRATE_256K); + + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, 1, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000); + + case V4L2_CID_MPEG_VIDEO_ENCODING: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2); + + case V4L2_CID_MPEG_VIDEO_ASPECT: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_ASPECT_4x3, + V4L2_MPEG_VIDEO_ASPECT_16x9, 1, + V4L2_MPEG_VIDEO_ASPECT_4x3); + + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + err = v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 8000000); + if (err == 0 && + params->vi_bitrate_mode == + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return err; + + case V4L2_CID_MPEG_STREAM_TYPE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_STREAM_TYPE_MPEG2_TS, + V4L2_MPEG_STREAM_TYPE_MPEG2_TS, 1, + V4L2_MPEG_STREAM_TYPE_MPEG2_TS); + + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 1, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); + case V4L2_CID_MPEG_VIDEO_BITRATE: + return v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 6000000); + case V4L2_CID_MPEG_STREAM_PID_PMT: + return v4l2_ctrl_query_fill(qctrl, 0, (1 << 14) - 1, 1, 16); + case V4L2_CID_MPEG_STREAM_PID_AUDIO: + return v4l2_ctrl_query_fill(qctrl, 0, (1 << 14) - 1, 1, 260); + case V4L2_CID_MPEG_STREAM_PID_VIDEO: + return v4l2_ctrl_query_fill(qctrl, 0, (1 << 14) - 1, 1, 256); + case V4L2_CID_MPEG_STREAM_PID_PCR: + return v4l2_ctrl_query_fill(qctrl, 0, (1 << 14) - 1, 1, 259); + + default: + break; + } + return -EINVAL; +} + +static int saa6752hs_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qmenu) +{ + static const u32 mpeg_audio_encoding[] = { + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_CTRL_MENU_IDS_END + }; + static const u32 mpeg_audio_ac3_encoding[] = { + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_MPEG_AUDIO_ENCODING_AC3, + V4L2_CTRL_MENU_IDS_END + }; + static u32 mpeg_audio_l2_bitrate[] = { + V4L2_MPEG_AUDIO_L2_BITRATE_256K, + V4L2_MPEG_AUDIO_L2_BITRATE_384K, + V4L2_CTRL_MENU_IDS_END + }; + static u32 mpeg_audio_ac3_bitrate[] = { + V4L2_MPEG_AUDIO_AC3_BITRATE_256K, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K, + V4L2_CTRL_MENU_IDS_END + }; + struct saa6752hs_state *h = to_state(sd); + struct v4l2_queryctrl qctrl; + int err; + + qctrl.id = qmenu->id; + err = saa6752hs_queryctrl(sd, &qctrl); + if (err) + return err; + switch (qmenu->id) { + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + return v4l2_ctrl_query_menu_valid_items(qmenu, + mpeg_audio_l2_bitrate); + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!h->has_ac3) + return -EINVAL; + return v4l2_ctrl_query_menu_valid_items(qmenu, + mpeg_audio_ac3_bitrate); + case V4L2_CID_MPEG_AUDIO_ENCODING: + return v4l2_ctrl_query_menu_valid_items(qmenu, + h->has_ac3 ? mpeg_audio_ac3_encoding : + mpeg_audio_encoding); + } + return v4l2_ctrl_query_menu(qmenu, &qctrl, NULL); +} + +static int saa6752hs_init(struct v4l2_subdev *sd, u32 leading_null_bytes) +{ + unsigned char buf[9], buf2[4]; + struct saa6752hs_state *h = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + unsigned size; + u32 crc; + unsigned char localPAT[256]; + unsigned char localPMT[256]; + + /* Set video format - must be done first as it resets other settings */ + set_reg8(client, 0x41, h->video_format); + + /* Set number of lines in input signal */ + set_reg8(client, 0x40, (h->standard & V4L2_STD_525_60) ? 1 : 0); + + /* set bitrate */ + saa6752hs_set_bitrate(client, h); + + /* Set GOP structure {3, 13} */ + set_reg16(client, 0x72, 0x030d); + + /* Set minimum Q-scale {4} */ + set_reg8(client, 0x82, 0x04); + + /* Set maximum Q-scale {12} */ + set_reg8(client, 0x83, 0x0c); + + /* Set Output Protocol */ + set_reg8(client, 0xd0, 0x81); + + /* Set video output stream format {TS} */ + set_reg8(client, 0xb0, 0x05); + + /* Set leading null byte for TS */ + set_reg16(client, 0xf6, leading_null_bytes); + + /* compute PAT */ + memcpy(localPAT, PAT, sizeof(PAT)); + localPAT[17] = 0xe0 | ((h->params.ts_pid_pmt >> 8) & 0x0f); + localPAT[18] = h->params.ts_pid_pmt & 0xff; + crc = crc32_be(~0, &localPAT[7], sizeof(PAT) - 7 - 4); + localPAT[sizeof(PAT) - 4] = (crc >> 24) & 0xFF; + localPAT[sizeof(PAT) - 3] = (crc >> 16) & 0xFF; + localPAT[sizeof(PAT) - 2] = (crc >> 8) & 0xFF; + localPAT[sizeof(PAT) - 1] = crc & 0xFF; + + /* compute PMT */ + if (h->params.au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) { + size = sizeof(PMT_AC3); + memcpy(localPMT, PMT_AC3, size); + } else { + size = sizeof(PMT); + memcpy(localPMT, PMT, size); + } + localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f); + localPMT[4] = h->params.ts_pid_pmt & 0xff; + localPMT[15] = 0xE0 | ((h->params.ts_pid_pcr >> 8) & 0x0F); + localPMT[16] = h->params.ts_pid_pcr & 0xFF; + localPMT[20] = 0xE0 | ((h->params.ts_pid_video >> 8) & 0x0F); + localPMT[21] = h->params.ts_pid_video & 0xFF; + localPMT[25] = 0xE0 | ((h->params.ts_pid_audio >> 8) & 0x0F); + localPMT[26] = h->params.ts_pid_audio & 0xFF; + crc = crc32_be(~0, &localPMT[7], size - 7 - 4); + localPMT[size - 4] = (crc >> 24) & 0xFF; + localPMT[size - 3] = (crc >> 16) & 0xFF; + localPMT[size - 2] = (crc >> 8) & 0xFF; + localPMT[size - 1] = crc & 0xFF; + + /* Set Audio PID */ + set_reg16(client, 0xc1, h->params.ts_pid_audio); + + /* Set Video PID */ + set_reg16(client, 0xc0, h->params.ts_pid_video); + + /* Set PCR PID */ + set_reg16(client, 0xc4, h->params.ts_pid_pcr); + + /* Send SI tables */ + i2c_master_send(client, localPAT, sizeof(PAT)); + i2c_master_send(client, localPMT, size); + + /* mute then unmute audio. This removes buzzing artefacts */ + set_reg8(client, 0xa4, 1); + set_reg8(client, 0xa4, 0); + + /* start it going */ + saa6752hs_chip_command(client, SAA6752HS_COMMAND_START); + + /* readout current state */ + buf[0] = 0xE1; + buf[1] = 0xA7; + buf[2] = 0xFE; + buf[3] = 0x82; + buf[4] = 0xB0; + i2c_master_send(client, buf, 5); + i2c_master_recv(client, buf2, 4); + + /* change aspect ratio */ + buf[0] = 0xE0; + buf[1] = 0xA7; + buf[2] = 0xFE; + buf[3] = 0x82; + buf[4] = 0xB0; + buf[5] = buf2[0]; + switch (h->params.vi_aspect) { + case V4L2_MPEG_VIDEO_ASPECT_16x9: + buf[6] = buf2[1] | 0x40; + break; + case V4L2_MPEG_VIDEO_ASPECT_4x3: + default: + buf[6] = buf2[1] & 0xBF; + break; + } + buf[7] = buf2[2]; + buf[8] = buf2[3]; + i2c_master_send(client, buf, 9); + + return 0; +} + +static int saa6752hs_do_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls, int set) +{ + struct saa6752hs_state *h = to_state(sd); + struct saa6752hs_mpeg_params params; + int i; + + if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + + params = h->params; + for (i = 0; i < ctrls->count; i++) { + int err = handle_ctrl(h->has_ac3, ¶ms, ctrls->controls + i, set); + + if (err) { + ctrls->error_idx = i; + return err; + } + } + if (set) + h->params = params; + return 0; +} + +static int saa6752hs_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls) +{ + return saa6752hs_do_ext_ctrls(sd, ctrls, 1); +} + +static int saa6752hs_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls) +{ + return saa6752hs_do_ext_ctrls(sd, ctrls, 0); +} + +static int saa6752hs_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls) +{ + struct saa6752hs_state *h = to_state(sd); + int i; + + if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + + for (i = 0; i < ctrls->count; i++) { + int err = get_ctrl(h->has_ac3, &h->params, ctrls->controls + i); + + if (err) { + ctrls->error_idx = i; + return err; + } + } + return 0; +} + +static int saa6752hs_g_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) +{ + struct saa6752hs_state *h = to_state(sd); + + if (h->video_format == SAA6752HS_VF_UNKNOWN) + h->video_format = SAA6752HS_VF_D1; + f->width = v4l2_format_table[h->video_format].fmt.pix.width; + f->height = v4l2_format_table[h->video_format].fmt.pix.height; + f->code = V4L2_MBUS_FMT_FIXED; + f->field = V4L2_FIELD_INTERLACED; + f->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int saa6752hs_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) +{ + struct saa6752hs_state *h = to_state(sd); + int dist_352, dist_480, dist_720; + + if (f->code != V4L2_MBUS_FMT_FIXED) + return -EINVAL; + + /* + FIXME: translate and round width/height into EMPRESS + subsample type: + + type | PAL | NTSC + --------------------------- + SIF | 352x288 | 352x240 + 1/2 D1 | 352x576 | 352x480 + 2/3 D1 | 480x576 | 480x480 + D1 | 720x576 | 720x480 + */ + + dist_352 = abs(f->width - 352); + dist_480 = abs(f->width - 480); + dist_720 = abs(f->width - 720); + if (dist_720 < dist_480) { + f->width = 720; + f->height = 576; + h->video_format = SAA6752HS_VF_D1; + } else if (dist_480 < dist_352) { + f->width = 480; + f->height = 576; + h->video_format = SAA6752HS_VF_2_3_D1; + } else { + f->width = 352; + if (abs(f->height - 576) < + abs(f->height - 288)) { + f->height = 576; + h->video_format = SAA6752HS_VF_1_2_D1; + } else { + f->height = 288; + h->video_format = SAA6752HS_VF_SIF; + } + } + f->field = V4L2_FIELD_INTERLACED; + f->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int saa6752hs_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa6752hs_state *h = to_state(sd); + + h->standard = std; + return 0; +} + +static int saa6752hs_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa6752hs_state *h = to_state(sd); + + return v4l2_chip_ident_i2c_client(client, + chip, h->chip, h->revision); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa6752hs_core_ops = { + .g_chip_ident = saa6752hs_g_chip_ident, + .init = saa6752hs_init, + .queryctrl = saa6752hs_queryctrl, + .querymenu = saa6752hs_querymenu, + .g_ext_ctrls = saa6752hs_g_ext_ctrls, + .s_ext_ctrls = saa6752hs_s_ext_ctrls, + .try_ext_ctrls = saa6752hs_try_ext_ctrls, + .s_std = saa6752hs_s_std, +}; + +static const struct v4l2_subdev_video_ops saa6752hs_video_ops = { + .s_mbus_fmt = saa6752hs_s_mbus_fmt, + .g_mbus_fmt = saa6752hs_g_mbus_fmt, +}; + +static const struct v4l2_subdev_ops saa6752hs_ops = { + .core = &saa6752hs_core_ops, + .video = &saa6752hs_video_ops, +}; + +static int saa6752hs_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa6752hs_state *h = kzalloc(sizeof(*h), GFP_KERNEL); + struct v4l2_subdev *sd; + u8 addr = 0x13; + u8 data[12]; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + if (h == NULL) + return -ENOMEM; + sd = &h->sd; + v4l2_i2c_subdev_init(sd, client, &saa6752hs_ops); + + i2c_master_send(client, &addr, 1); + i2c_master_recv(client, data, sizeof(data)); + h->chip = V4L2_IDENT_SAA6752HS; + h->revision = (data[8] << 8) | data[9]; + h->has_ac3 = 0; + if (h->revision == 0x0206) { + h->chip = V4L2_IDENT_SAA6752HS_AC3; + h->has_ac3 = 1; + v4l_info(client, "support AC-3\n"); + } + h->params = param_defaults; + h->standard = 0; /* Assume 625 input lines */ + return 0; +} + +static int saa6752hs_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id saa6752hs_id[] = { + { "saa6752hs", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa6752hs_id); + +static struct i2c_driver saa6752hs_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa6752hs", + }, + .probe = saa6752hs_probe, + .remove = saa6752hs_remove, + .id_table = saa6752hs_id, +}; + +module_i2c_driver(saa6752hs_driver); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134-alsa.c b/drivers/media/pci/saa7134/saa7134-alsa.c new file mode 100644 index 00000000..dbcdfbf8 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-alsa.c @@ -0,0 +1,1211 @@ +/* + * SAA713x ALSA support for V4L + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "saa7134.h" +#include "saa7134-reg.h" + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"enable debug messages [alsa]"); + +/* + * Configuration macros + */ + +/* defaults */ +#define MIXER_ADDR_UNSELECTED -1 +#define MIXER_ADDR_TVTUNER 0 +#define MIXER_ADDR_LINE1 1 +#define MIXER_ADDR_LINE2 2 +#define MIXER_ADDR_LAST 2 + + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ +static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; + +module_param_array(index, int, NULL, 0444); +module_param_array(enable, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s)."); +MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s)."); + +#define dprintk(fmt, arg...) if (debug) \ + printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg) + + + +/* + * Main chip structure + */ + +typedef struct snd_card_saa7134 { + struct snd_card *card; + spinlock_t mixer_lock; + int mixer_volume[MIXER_ADDR_LAST+1][2]; + int capture_source_addr; + int capture_source[2]; + struct snd_kcontrol *capture_ctl[MIXER_ADDR_LAST+1]; + struct pci_dev *pci; + struct saa7134_dev *dev; + + unsigned long iobase; + s16 irq; + u16 mute_was_on; + + spinlock_t lock; +} snd_card_saa7134_t; + + +/* + * PCM structure + */ + +typedef struct snd_card_saa7134_pcm { + struct saa7134_dev *dev; + + spinlock_t lock; + + struct snd_pcm_substream *substream; +} snd_card_saa7134_pcm_t; + +static struct snd_card *snd_saa7134_cards[SNDRV_CARDS]; + + +/* + * saa7134 DMA audio stop + * + * Called when the capture device is released or the buffer overflows + * + * - Copied verbatim from saa7134-oss's dsp_dma_stop. + * + */ + +static void saa7134_dma_stop(struct saa7134_dev *dev) +{ + dev->dmasound.dma_blk = -1; + dev->dmasound.dma_running = 0; + saa7134_set_dmabits(dev); +} + +/* + * saa7134 DMA audio start + * + * Called when preparing the capture device for use + * + * - Copied verbatim from saa7134-oss's dsp_dma_start. + * + */ + +static void saa7134_dma_start(struct saa7134_dev *dev) +{ + dev->dmasound.dma_blk = 0; + dev->dmasound.dma_running = 1; + saa7134_set_dmabits(dev); +} + +/* + * saa7134 audio DMA IRQ handler + * + * Called whenever we get an SAA7134_IRQ_REPORT_DONE_RA3 interrupt + * Handles shifting between the 2 buffers, manages the read counters, + * and notifies ALSA when periods elapse + * + * - Mostly copied from saa7134-oss's saa7134_irq_oss_done. + * + */ + +static void saa7134_irq_alsa_done(struct saa7134_dev *dev, + unsigned long status) +{ + int next_blk, reg = 0; + + spin_lock(&dev->slock); + if (UNSET == dev->dmasound.dma_blk) { + dprintk("irq: recording stopped\n"); + goto done; + } + if (0 != (status & 0x0f000000)) + dprintk("irq: lost %ld\n", (status >> 24) & 0x0f); + if (0 == (status & 0x10000000)) { + /* odd */ + if (0 == (dev->dmasound.dma_blk & 0x01)) + reg = SAA7134_RS_BA1(6); + } else { + /* even */ + if (1 == (dev->dmasound.dma_blk & 0x01)) + reg = SAA7134_RS_BA2(6); + } + if (0 == reg) { + dprintk("irq: field oops [%s]\n", + (status & 0x10000000) ? "even" : "odd"); + goto done; + } + + if (dev->dmasound.read_count >= dev->dmasound.blksize * (dev->dmasound.blocks-2)) { + dprintk("irq: overrun [full=%d/%d] - Blocks in %d\n",dev->dmasound.read_count, + dev->dmasound.bufsize, dev->dmasound.blocks); + spin_unlock(&dev->slock); + snd_pcm_stream_lock(dev->dmasound.substream); + snd_pcm_stop(dev->dmasound.substream,SNDRV_PCM_STATE_XRUN); + snd_pcm_stream_unlock(dev->dmasound.substream); + return; + } + + /* next block addr */ + next_blk = (dev->dmasound.dma_blk + 2) % dev->dmasound.blocks; + saa_writel(reg,next_blk * dev->dmasound.blksize); + if (debug > 2) + dprintk("irq: ok, %s, next_blk=%d, addr=%x, blocks=%u, size=%u, read=%u\n", + (status & 0x10000000) ? "even" : "odd ", next_blk, + next_blk * dev->dmasound.blksize, dev->dmasound.blocks, dev->dmasound.blksize, dev->dmasound.read_count); + + /* update status & wake waiting readers */ + dev->dmasound.dma_blk = (dev->dmasound.dma_blk + 1) % dev->dmasound.blocks; + dev->dmasound.read_count += dev->dmasound.blksize; + + dev->dmasound.recording_on = reg; + + if (dev->dmasound.read_count >= snd_pcm_lib_period_bytes(dev->dmasound.substream)) { + spin_unlock(&dev->slock); + snd_pcm_period_elapsed(dev->dmasound.substream); + spin_lock(&dev->slock); + } + + done: + spin_unlock(&dev->slock); + +} + +/* + * IRQ request handler + * + * Runs along with saa7134's IRQ handler, discards anything that isn't + * DMA sound + * + */ + +static irqreturn_t saa7134_alsa_irq(int irq, void *dev_id) +{ + struct saa7134_dmasound *dmasound = dev_id; + struct saa7134_dev *dev = dmasound->priv_data; + + unsigned long report, status; + int loop, handled = 0; + + for (loop = 0; loop < 10; loop++) { + report = saa_readl(SAA7134_IRQ_REPORT); + status = saa_readl(SAA7134_IRQ_STATUS); + + if (report & SAA7134_IRQ_REPORT_DONE_RA3) { + handled = 1; + saa_writel(SAA7134_IRQ_REPORT, + SAA7134_IRQ_REPORT_DONE_RA3); + saa7134_irq_alsa_done(dev, status); + } else { + goto out; + } + } + + if (loop == 10) { + dprintk("error! looping IRQ!"); + } + +out: + return IRQ_RETVAL(handled); +} + +/* + * ALSA capture trigger + * + * - One of the ALSA capture callbacks. + * + * Called whenever a capture is started or stopped. Must be defined, + * but there's nothing we want to do here + * + */ + +static int snd_card_saa7134_capture_trigger(struct snd_pcm_substream * substream, + int cmd) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + snd_card_saa7134_pcm_t *pcm = runtime->private_data; + struct saa7134_dev *dev=pcm->dev; + int err = 0; + + spin_lock(&dev->slock); + if (cmd == SNDRV_PCM_TRIGGER_START) { + /* start dma */ + saa7134_dma_start(dev); + } else if (cmd == SNDRV_PCM_TRIGGER_STOP) { + /* stop dma */ + saa7134_dma_stop(dev); + } else { + err = -EINVAL; + } + spin_unlock(&dev->slock); + + return err; +} + +/* + * DMA buffer initialization + * + * Uses V4L functions to initialize the DMA. Shouldn't be necessary in + * ALSA, but I was unable to use ALSA's own DMA, and had to force the + * usage of V4L's + * + * - Copied verbatim from saa7134-oss. + * + */ + +static int dsp_buffer_init(struct saa7134_dev *dev) +{ + int err; + + BUG_ON(!dev->dmasound.bufsize); + + videobuf_dma_init(&dev->dmasound.dma); + err = videobuf_dma_init_kernel(&dev->dmasound.dma, PCI_DMA_FROMDEVICE, + (dev->dmasound.bufsize + PAGE_SIZE) >> PAGE_SHIFT); + if (0 != err) + return err; + return 0; +} + +/* + * DMA buffer release + * + * Called after closing the device, during snd_card_saa7134_capture_close + * + */ + +static int dsp_buffer_free(struct saa7134_dev *dev) +{ + BUG_ON(!dev->dmasound.blksize); + + videobuf_dma_free(&dev->dmasound.dma); + + dev->dmasound.blocks = 0; + dev->dmasound.blksize = 0; + dev->dmasound.bufsize = 0; + + return 0; +} + +/* + * Setting the capture source and updating the ALSA controls + */ +static int snd_saa7134_capsrc_set(struct snd_kcontrol *kcontrol, + int left, int right, bool force_notify) +{ + snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + int change = 0, addr = kcontrol->private_value; + int active, old_addr; + u32 anabar, xbarin; + int analog_io, rate; + struct saa7134_dev *dev; + + dev = chip->dev; + + spin_lock_irq(&chip->mixer_lock); + + active = left != 0 || right != 0; + old_addr = chip->capture_source_addr; + + /* The active capture source cannot be deactivated */ + if (active) { + change = old_addr != addr || + chip->capture_source[0] != left || + chip->capture_source[1] != right; + + chip->capture_source[0] = left; + chip->capture_source[1] = right; + chip->capture_source_addr = addr; + dev->dmasound.input = addr; + } + spin_unlock_irq(&chip->mixer_lock); + + if (change) { + switch (dev->pci->device) { + + case PCI_DEVICE_ID_PHILIPS_SAA7134: + switch (addr) { + case MIXER_ADDR_TVTUNER: + saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, + 0xc0, 0xc0); + saa_andorb(SAA7134_SIF_SAMPLE_FREQ, + 0x03, 0x00); + break; + case MIXER_ADDR_LINE1: + case MIXER_ADDR_LINE2: + analog_io = (MIXER_ADDR_LINE1 == addr) ? + 0x00 : 0x08; + rate = (32000 == dev->dmasound.rate) ? + 0x01 : 0x03; + saa_andorb(SAA7134_ANALOG_IO_SELECT, + 0x08, analog_io); + saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, + 0xc0, 0x80); + saa_andorb(SAA7134_SIF_SAMPLE_FREQ, + 0x03, rate); + break; + } + + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + xbarin = 0x03; /* adc */ + anabar = 0; + switch (addr) { + case MIXER_ADDR_TVTUNER: + xbarin = 0; /* Demodulator */ + anabar = 2; /* DACs */ + break; + case MIXER_ADDR_LINE1: + anabar = 0; /* aux1, aux1 */ + break; + case MIXER_ADDR_LINE2: + anabar = 9; /* aux2, aux2 */ + break; + } + + /* output xbar always main channel */ + saa_dsp_writel(dev, SAA7133_DIGITAL_OUTPUT_SEL1, + 0xbbbb10); + + if (left || right) { + /* We've got data, turn the input on */ + saa_dsp_writel(dev, SAA7133_DIGITAL_INPUT_XBAR1, + xbarin); + saa_writel(SAA7133_ANALOG_IO_SELECT, anabar); + } else { + saa_dsp_writel(dev, SAA7133_DIGITAL_INPUT_XBAR1, + 0); + saa_writel(SAA7133_ANALOG_IO_SELECT, 0); + } + break; + } + } + + if (change) { + if (force_notify) + snd_ctl_notify(chip->card, + SNDRV_CTL_EVENT_MASK_VALUE, + &chip->capture_ctl[addr]->id); + + if (old_addr != MIXER_ADDR_UNSELECTED && old_addr != addr) + snd_ctl_notify(chip->card, + SNDRV_CTL_EVENT_MASK_VALUE, + &chip->capture_ctl[old_addr]->id); + } + + return change; +} + +/* + * ALSA PCM preparation + * + * - One of the ALSA capture callbacks. + * + * Called right after the capture device is opened, this function configures + * the buffer using the previously defined functions, allocates the memory, + * sets up the hardware registers, and then starts the DMA. When this function + * returns, the audio should be flowing. + * + */ + +static int snd_card_saa7134_capture_prepare(struct snd_pcm_substream * substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + int bswap, sign; + u32 fmt, control; + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev; + snd_card_saa7134_pcm_t *pcm = runtime->private_data; + + pcm->dev->dmasound.substream = substream; + + dev = saa7134->dev; + + if (snd_pcm_format_width(runtime->format) == 8) + fmt = 0x00; + else + fmt = 0x01; + + if (snd_pcm_format_signed(runtime->format)) + sign = 1; + else + sign = 0; + + if (snd_pcm_format_big_endian(runtime->format)) + bswap = 1; + else + bswap = 0; + + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + if (1 == runtime->channels) + fmt |= (1 << 3); + if (2 == runtime->channels) + fmt |= (3 << 3); + if (sign) + fmt |= 0x04; + + fmt |= (MIXER_ADDR_TVTUNER == dev->dmasound.input) ? 0xc0 : 0x80; + saa_writeb(SAA7134_NUM_SAMPLES0, ((dev->dmasound.blksize - 1) & 0x0000ff)); + saa_writeb(SAA7134_NUM_SAMPLES1, ((dev->dmasound.blksize - 1) & 0x00ff00) >> 8); + saa_writeb(SAA7134_NUM_SAMPLES2, ((dev->dmasound.blksize - 1) & 0xff0000) >> 16); + saa_writeb(SAA7134_AUDIO_FORMAT_CTRL, fmt); + + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + if (1 == runtime->channels) + fmt |= (1 << 4); + if (2 == runtime->channels) + fmt |= (2 << 4); + if (!sign) + fmt |= 0x04; + saa_writel(SAA7133_NUM_SAMPLES, dev->dmasound.blksize -1); + saa_writel(SAA7133_AUDIO_CHANNEL, 0x543210 | (fmt << 24)); + break; + } + + dprintk("rec_start: afmt=%d ch=%d => fmt=0x%x swap=%c\n", + runtime->format, runtime->channels, fmt, + bswap ? 'b' : '-'); + /* dma: setup channel 6 (= AUDIO) */ + control = SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (dev->dmasound.pt.dma >> 12); + if (bswap) + control |= SAA7134_RS_CONTROL_BSWAP; + + saa_writel(SAA7134_RS_BA1(6),0); + saa_writel(SAA7134_RS_BA2(6),dev->dmasound.blksize); + saa_writel(SAA7134_RS_PITCH(6),0); + saa_writel(SAA7134_RS_CONTROL(6),control); + + dev->dmasound.rate = runtime->rate; + + /* Setup and update the card/ALSA controls */ + snd_saa7134_capsrc_set(saa7134->capture_ctl[dev->dmasound.input], 1, 1, + true); + + return 0; + +} + +/* + * ALSA pointer fetching + * + * - One of the ALSA capture callbacks. + * + * Called whenever a period elapses, it must return the current hardware + * position of the buffer. + * Also resets the read counter used to prevent overruns + * + */ + +static snd_pcm_uframes_t +snd_card_saa7134_capture_pointer(struct snd_pcm_substream * substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + snd_card_saa7134_pcm_t *pcm = runtime->private_data; + struct saa7134_dev *dev=pcm->dev; + + if (dev->dmasound.read_count) { + dev->dmasound.read_count -= snd_pcm_lib_period_bytes(substream); + dev->dmasound.read_offset += snd_pcm_lib_period_bytes(substream); + if (dev->dmasound.read_offset == dev->dmasound.bufsize) + dev->dmasound.read_offset = 0; + } + + return bytes_to_frames(runtime, dev->dmasound.read_offset); +} + +/* + * ALSA hardware capabilities definition + * + * Report only 32kHz for ALSA: + * + * - SAA7133/35 uses DDEP (DemDec Easy Programming mode), which works in 32kHz + * only + * - SAA7134 for TV mode uses DemDec mode (32kHz) + * - Radio works in 32kHz only + * - When recording 48kHz from Line1/Line2, switching of capture source to TV + * means + * switching to 32kHz without any frequency translation + */ + +static struct snd_pcm_hardware snd_card_saa7134_capture = +{ + .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S16_BE | \ + SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_U8 | \ + SNDRV_PCM_FMTBIT_U16_LE | \ + SNDRV_PCM_FMTBIT_U16_BE, + .rates = SNDRV_PCM_RATE_32000, + .rate_min = 32000, + .rate_max = 32000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = (256*1024), + .period_bytes_min = 64, + .period_bytes_max = (256*1024), + .periods_min = 4, + .periods_max = 1024, +}; + +static void snd_card_saa7134_runtime_free(struct snd_pcm_runtime *runtime) +{ + snd_card_saa7134_pcm_t *pcm = runtime->private_data; + + kfree(pcm); +} + + +/* + * ALSA hardware params + * + * - One of the ALSA capture callbacks. + * + * Called on initialization, right before the PCM preparation + * + */ + +static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, + struct snd_pcm_hw_params * hw_params) +{ + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev; + unsigned int period_size, periods; + int err; + + period_size = params_period_bytes(hw_params); + periods = params_periods(hw_params); + + if (period_size < 0x100 || period_size > 0x10000) + return -EINVAL; + if (periods < 4) + return -EINVAL; + if (period_size * periods > 1024 * 1024) + return -EINVAL; + + dev = saa7134->dev; + + if (dev->dmasound.blocks == periods && + dev->dmasound.blksize == period_size) + return 0; + + /* release the old buffer */ + if (substream->runtime->dma_area) { + saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); + videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); + dsp_buffer_free(dev); + substream->runtime->dma_area = NULL; + } + dev->dmasound.blocks = periods; + dev->dmasound.blksize = period_size; + dev->dmasound.bufsize = period_size * periods; + + err = dsp_buffer_init(dev); + if (0 != err) { + dev->dmasound.blocks = 0; + dev->dmasound.blksize = 0; + dev->dmasound.bufsize = 0; + return err; + } + + if (0 != (err = videobuf_dma_map(&dev->pci->dev, &dev->dmasound.dma))) { + dsp_buffer_free(dev); + return err; + } + if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) { + videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); + dsp_buffer_free(dev); + return err; + } + if (0 != (err = saa7134_pgtable_build(dev->pci,&dev->dmasound.pt, + dev->dmasound.dma.sglist, + dev->dmasound.dma.sglen, + 0))) { + saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); + videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); + dsp_buffer_free(dev); + return err; + } + + /* I should be able to use runtime->dma_addr in the control + byte, but it doesn't work. So I allocate the DMA using the + V4L functions, and force ALSA to use that as the DMA area */ + + substream->runtime->dma_area = dev->dmasound.dma.vaddr; + substream->runtime->dma_bytes = dev->dmasound.bufsize; + substream->runtime->dma_addr = 0; + + return 0; + +} + +/* + * ALSA hardware release + * + * - One of the ALSA capture callbacks. + * + * Called after closing the device, but before snd_card_saa7134_capture_close + * It stops the DMA audio and releases the buffers. + * + */ + +static int snd_card_saa7134_hw_free(struct snd_pcm_substream * substream) +{ + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev; + + dev = saa7134->dev; + + if (substream->runtime->dma_area) { + saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); + videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); + dsp_buffer_free(dev); + substream->runtime->dma_area = NULL; + } + + return 0; +} + +/* + * ALSA capture finish + * + * - One of the ALSA capture callbacks. + * + * Called after closing the device. + * + */ + +static int snd_card_saa7134_capture_close(struct snd_pcm_substream * substream) +{ + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev = saa7134->dev; + + if (saa7134->mute_was_on) { + dev->ctl_mute = 1; + saa7134_tvaudio_setmute(dev); + } + return 0; +} + +/* + * ALSA capture start + * + * - One of the ALSA capture callbacks. + * + * Called when opening the device. It creates and populates the PCM + * structure + * + */ + +static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + snd_card_saa7134_pcm_t *pcm; + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev; + int amux, err; + + if (!saa7134) { + printk(KERN_ERR "BUG: saa7134 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + dev = saa7134->dev; + mutex_lock(&dev->dmasound.lock); + + dev->dmasound.read_count = 0; + dev->dmasound.read_offset = 0; + + amux = dev->input->amux; + if ((amux < 1) || (amux > 3)) + amux = 1; + dev->dmasound.input = amux - 1; + + mutex_unlock(&dev->dmasound.lock); + + pcm = kzalloc(sizeof(*pcm), GFP_KERNEL); + if (pcm == NULL) + return -ENOMEM; + + pcm->dev=saa7134->dev; + + spin_lock_init(&pcm->lock); + + pcm->substream = substream; + runtime->private_data = pcm; + runtime->private_free = snd_card_saa7134_runtime_free; + runtime->hw = snd_card_saa7134_capture; + + if (dev->ctl_mute != 0) { + saa7134->mute_was_on = 1; + dev->ctl_mute = 0; + saa7134_tvaudio_setmute(dev); + } + + err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + return err; + + err = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIODS, 2); + if (err < 0) + return err; + + return 0; +} + +/* + * page callback (needed for mmap) + */ + +static struct page *snd_card_saa7134_page(struct snd_pcm_substream *substream, + unsigned long offset) +{ + void *pageptr = substream->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); +} + +/* + * ALSA capture callbacks definition + */ + +static struct snd_pcm_ops snd_card_saa7134_capture_ops = { + .open = snd_card_saa7134_capture_open, + .close = snd_card_saa7134_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_card_saa7134_hw_params, + .hw_free = snd_card_saa7134_hw_free, + .prepare = snd_card_saa7134_capture_prepare, + .trigger = snd_card_saa7134_capture_trigger, + .pointer = snd_card_saa7134_capture_pointer, + .page = snd_card_saa7134_page, +}; + +/* + * ALSA PCM setup + * + * Called when initializing the board. Sets up the name and hooks up + * the callbacks + * + */ + +static int snd_card_saa7134_pcm(snd_card_saa7134_t *saa7134, int device) +{ + struct snd_pcm *pcm; + int err; + + if ((err = snd_pcm_new(saa7134->card, "SAA7134 PCM", device, 0, 1, &pcm)) < 0) + return err; + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_card_saa7134_capture_ops); + pcm->private_data = saa7134; + pcm->info_flags = 0; + strcpy(pcm->name, "SAA7134 PCM"); + return 0; +} + +#define SAA713x_VOLUME(xname, xindex, addr) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_saa7134_volume_info, \ + .get = snd_saa7134_volume_get, .put = snd_saa7134_volume_put, \ + .private_value = addr } + +static int snd_saa7134_volume_info(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_info * uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 20; + return 0; +} + +static int snd_saa7134_volume_get(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_value * ucontrol) +{ + snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + int addr = kcontrol->private_value; + + ucontrol->value.integer.value[0] = chip->mixer_volume[addr][0]; + ucontrol->value.integer.value[1] = chip->mixer_volume[addr][1]; + return 0; +} + +static int snd_saa7134_volume_put(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_value * ucontrol) +{ + snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + struct saa7134_dev *dev = chip->dev; + + int change, addr = kcontrol->private_value; + int left, right; + + left = ucontrol->value.integer.value[0]; + if (left < 0) + left = 0; + if (left > 20) + left = 20; + right = ucontrol->value.integer.value[1]; + if (right < 0) + right = 0; + if (right > 20) + right = 20; + spin_lock_irq(&chip->mixer_lock); + change = 0; + if (chip->mixer_volume[addr][0] != left) { + change = 1; + right = left; + } + if (chip->mixer_volume[addr][1] != right) { + change = 1; + left = right; + } + if (change) { + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + switch (addr) { + case MIXER_ADDR_TVTUNER: + left = 20; + break; + case MIXER_ADDR_LINE1: + saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x10, + (left > 10) ? 0x00 : 0x10); + break; + case MIXER_ADDR_LINE2: + saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x20, + (left > 10) ? 0x00 : 0x20); + break; + } + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + switch (addr) { + case MIXER_ADDR_TVTUNER: + left = 20; + break; + case MIXER_ADDR_LINE1: + saa_andorb(0x0594, 0x10, + (left > 10) ? 0x00 : 0x10); + break; + case MIXER_ADDR_LINE2: + saa_andorb(0x0594, 0x20, + (left > 10) ? 0x00 : 0x20); + break; + } + break; + } + chip->mixer_volume[addr][0] = left; + chip->mixer_volume[addr][1] = right; + } + spin_unlock_irq(&chip->mixer_lock); + return change; +} + +#define SAA713x_CAPSRC(xname, xindex, addr) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_saa7134_capsrc_info, \ + .get = snd_saa7134_capsrc_get, .put = snd_saa7134_capsrc_put, \ + .private_value = addr } + +static int snd_saa7134_capsrc_info(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_info * uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int snd_saa7134_capsrc_get(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_value * ucontrol) +{ + snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + int addr = kcontrol->private_value; + + spin_lock_irq(&chip->mixer_lock); + if (chip->capture_source_addr == addr) { + ucontrol->value.integer.value[0] = chip->capture_source[0]; + ucontrol->value.integer.value[1] = chip->capture_source[1]; + } else { + ucontrol->value.integer.value[0] = 0; + ucontrol->value.integer.value[1] = 0; + } + spin_unlock_irq(&chip->mixer_lock); + + return 0; +} + +static int snd_saa7134_capsrc_put(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_value * ucontrol) +{ + int left, right; + left = ucontrol->value.integer.value[0] & 1; + right = ucontrol->value.integer.value[1] & 1; + + return snd_saa7134_capsrc_set(kcontrol, left, right, false); +} + +static struct snd_kcontrol_new snd_saa7134_volume_controls[] = { +SAA713x_VOLUME("Video Volume", 0, MIXER_ADDR_TVTUNER), +SAA713x_VOLUME("Line Volume", 1, MIXER_ADDR_LINE1), +SAA713x_VOLUME("Line Volume", 2, MIXER_ADDR_LINE2), +}; + +static struct snd_kcontrol_new snd_saa7134_capture_controls[] = { +SAA713x_CAPSRC("Video Capture Switch", 0, MIXER_ADDR_TVTUNER), +SAA713x_CAPSRC("Line Capture Switch", 1, MIXER_ADDR_LINE1), +SAA713x_CAPSRC("Line Capture Switch", 2, MIXER_ADDR_LINE2), +}; + +/* + * ALSA mixer setup + * + * Called when initializing the board. Sets up the name and hooks up + * the callbacks + * + */ + +static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip) +{ + struct snd_card *card = chip->card; + struct snd_kcontrol *kcontrol; + unsigned int idx; + int err, addr; + + strcpy(card->mixername, "SAA7134 Mixer"); + + for (idx = 0; idx < ARRAY_SIZE(snd_saa7134_volume_controls); idx++) { + kcontrol = snd_ctl_new1(&snd_saa7134_volume_controls[idx], + chip); + err = snd_ctl_add(card, kcontrol); + if (err < 0) + return err; + } + + for (idx = 0; idx < ARRAY_SIZE(snd_saa7134_capture_controls); idx++) { + kcontrol = snd_ctl_new1(&snd_saa7134_capture_controls[idx], + chip); + addr = snd_saa7134_capture_controls[idx].private_value; + chip->capture_ctl[addr] = kcontrol; + err = snd_ctl_add(card, kcontrol); + if (err < 0) + return err; + } + + chip->capture_source_addr = MIXER_ADDR_UNSELECTED; + return 0; +} + +static void snd_saa7134_free(struct snd_card * card) +{ + snd_card_saa7134_t *chip = card->private_data; + + if (chip->dev->dmasound.priv_data == NULL) + return; + + if (chip->irq >= 0) + free_irq(chip->irq, &chip->dev->dmasound); + + chip->dev->dmasound.priv_data = NULL; + +} + +/* + * ALSA initialization + * + * Called by the init routine, once for each saa7134 device present, + * it creates the basic structures and registers the ALSA devices + * + */ + +static int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum) +{ + + struct snd_card *card; + snd_card_saa7134_t *chip; + int err; + + + if (devnum >= SNDRV_CARDS) + return -ENODEV; + if (!enable[devnum]) + return -ENODEV; + + err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, + sizeof(snd_card_saa7134_t), &card); + if (err < 0) + return err; + + strcpy(card->driver, "SAA7134"); + + /* Card "creation" */ + + card->private_free = snd_saa7134_free; + chip = card->private_data; + + spin_lock_init(&chip->lock); + spin_lock_init(&chip->mixer_lock); + + chip->dev = dev; + + chip->card = card; + + chip->pci = dev->pci; + chip->iobase = pci_resource_start(dev->pci, 0); + + + err = request_irq(dev->pci->irq, saa7134_alsa_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, + (void*) &dev->dmasound); + + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d for ALSA\n", + dev->name, dev->pci->irq); + goto __nodev; + } + + chip->irq = dev->pci->irq; + + mutex_init(&dev->dmasound.lock); + + if ((err = snd_card_saa7134_new_mixer(chip)) < 0) + goto __nodev; + + if ((err = snd_card_saa7134_pcm(chip, 0)) < 0) + goto __nodev; + + snd_card_set_dev(card, &chip->pci->dev); + + /* End of "creation" */ + + strcpy(card->shortname, "SAA7134"); + sprintf(card->longname, "%s at 0x%lx irq %d", + chip->dev->name, chip->iobase, chip->irq); + + printk(KERN_INFO "%s/alsa: %s registered as card %d\n",dev->name,card->longname,index[devnum]); + + if ((err = snd_card_register(card)) == 0) { + snd_saa7134_cards[devnum] = card; + return 0; + } + +__nodev: + snd_card_free(card); + return err; +} + + +static int alsa_device_init(struct saa7134_dev *dev) +{ + dev->dmasound.priv_data = dev; + alsa_card_saa7134_create(dev,dev->nr); + return 1; +} + +static int alsa_device_exit(struct saa7134_dev *dev) +{ + + snd_card_free(snd_saa7134_cards[dev->nr]); + snd_saa7134_cards[dev->nr] = NULL; + return 1; +} + +/* + * Module initializer + * + * Loops through present saa7134 cards, and assigns an ALSA device + * to each one + * + */ + +static int saa7134_alsa_init(void) +{ + struct saa7134_dev *dev = NULL; + struct list_head *list; + + saa7134_dmasound_init = alsa_device_init; + saa7134_dmasound_exit = alsa_device_exit; + + printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n"); + + list_for_each(list,&saa7134_devlist) { + dev = list_entry(list, struct saa7134_dev, devlist); + if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130) + printk(KERN_INFO "%s/alsa: %s doesn't support digital audio\n", + dev->name, saa7134_boards[dev->board].name); + else + alsa_device_init(dev); + } + + if (dev == NULL) + printk(KERN_INFO "saa7134 ALSA: no saa7134 cards found\n"); + + return 0; + +} + +/* + * Module destructor + */ + +static void saa7134_alsa_exit(void) +{ + int idx; + + for (idx = 0; idx < SNDRV_CARDS; idx++) { + snd_card_free(snd_saa7134_cards[idx]); + } + + saa7134_dmasound_init = NULL; + saa7134_dmasound_exit = NULL; + printk(KERN_INFO "saa7134 ALSA driver for DMA sound unloaded\n"); + + return; +} + +/* We initialize this late, to make sure the sound system is up and running */ +late_initcall(saa7134_alsa_init); +module_exit(saa7134_alsa_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ricardo Cerqueira"); diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c new file mode 100644 index 00000000..e87a7346 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-cards.c @@ -0,0 +1,8097 @@ +/* + * + * device driver for philips saa7134 based TV cards + * card-specific stuff. + * + * (c) 2001-04 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" +#include "tuner-xc2028.h" +#include +#include +#include "tea5767.h" +#include "tda18271.h" +#include "xc5000.h" +#include "s5h1411.h" + +/* commly used strings */ +static char name_mute[] = "mute"; +static char name_radio[] = "Radio"; +static char name_tv[] = "Television"; +static char name_tv_mono[] = "TV (mono only)"; +static char name_comp[] = "Composite"; +static char name_comp1[] = "Composite1"; +static char name_comp2[] = "Composite2"; +static char name_comp3[] = "Composite3"; +static char name_comp4[] = "Composite4"; +static char name_svideo[] = "S-Video"; + +/* ------------------------------------------------------------------ */ +/* board config info */ + +static struct tda18271_std_map aver_a706_std_map = { + .fm_radio = { .if_freq = 5500, .fm_rfn = 0, .agc_mode = 3, .std = 0, + .if_lvl = 0, .rfagc_top = 0x2c, }, +}; + +/* If radio_type !=UNSET, radio_addr should be specified + */ + +struct saa7134_board saa7134_boards[] = { + [SAA7134_BOARD_UNKNOWN] = { + .name = "UNKNOWN/GENERIC", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .inputs = {{ + .name = "default", + .vmux = 0, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_PROTEUS_PRO] = { + /* /me */ + .name = "Proteus Pro [philips reference design]", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_FLYVIDEO3000] = { + /* "Marco d'Itri" */ + .name = "LifeView FlyVIDEO3000", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .gpiomask = 0xe000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x8000, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x4000, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x4000, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x4000, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x2000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x8000, + }, + }, + [SAA7134_BOARD_FLYVIDEO2000] = { + /* "TC Wan" */ + .name = "LifeView/Typhoon FlyVIDEO2000", + .audio_clock = 0x00200000, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .gpiomask = 0xe000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x4000, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x4000, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x4000, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x2000, + }, + .mute = { + .name = name_mute, + .amux = LINE2, + .gpio = 0x8000, + }, + }, + [SAA7134_BOARD_FLYTVPLATINUM_MINI] = { + /* "Arnaud Quette" */ + .name = "LifeView FlyTV Platinum Mini", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, /* Composite signal on S-Video input */ + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_FLYTVPLATINUM_FM] = { + /* LifeView FlyTV Platinum FM (LR214WF) */ + /* "Peter Missel */ + .name = "LifeView FlyTV Platinum FM / Gold", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .gpiomask = 0x1E000, /* Set GP16 and unused 15,14,13 to Output */ + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x10000, /* GP16=1 selects TV input */ + .tv = 1, + },{ +/* .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + },{ +*/ .name = name_comp1, /* Composite signal on S-Video input */ + .vmux = 0, + .amux = LINE2, +/* .gpio = 0x4000, */ + },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, +/* .gpio = 0x4000, */ + },{ + .name = name_svideo, /* S-Video signal on S-Video input */ + .vmux = 8, + .amux = LINE2, +/* .gpio = 0x4000, */ + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00000, /* GP16=0 selects FM radio antenna */ + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x10000, + }, + }, + [SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM] = { + /* RoverMedia TV Link Pro FM (LR138 REV:I) */ + /* Eugene Yudin */ + .name = "RoverMedia TV Link Pro FM", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MFPE05 2 */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0xe000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x8000, + .tv = 1, + }, { + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x4000, + }, { + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x4000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x4000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x2000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x8000, + }, + }, + [SAA7134_BOARD_EMPRESS] = { + /* "Gert Vervoort" */ + .name = "EMPRESS", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .empress_addr = 0x20, + + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + }, + [SAA7134_BOARD_MONSTERTV] = { + /* "K.Ohta" */ + .name = "SKNet Monster TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_MD9717] = { + .name = "Tevion MD 9717", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + /* workaround for problems with normal TV sound */ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, + [SAA7134_BOARD_TVSTATION_RDS] = { + /* Typhoon TV Tuner RDS: Art.Nr. 50694 */ + .name = "KNC One TV-Station RDS / Typhoon TV Tuner RDS", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + + .name = "CVid over SVid", + .vmux = 0, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_TVSTATION_DVR] = { + .name = "KNC One TV-Station DVR", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .empress_addr = 0x20, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x820000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x20000, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x20000, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x20000, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x20000, + }, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + }, + [SAA7134_BOARD_CINERGY400] = { + .name = "Terratec Cinergy 400 TV", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 4, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp2, /* CVideo over SVideo Connector */ + .vmux = 0, + .amux = LINE1, + }} + }, + [SAA7134_BOARD_MD5044] = { + .name = "Medion 5044", + .audio_clock = 0x00187de7, /* was: 0x00200000, */ + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + /* workaround for problems with normal TV sound */ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_KWORLD] = { + .name = "Kworld/KuroutoShikou SAA7130-TVPCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_CINERGY600] = { + .name = "Terratec Cinergy 600 TV", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 4, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp2, /* CVideo over SVideo Connector */ + .vmux = 0, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_MD7134] = { + .name = "Medion 7134", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, + [SAA7134_BOARD_TYPHOON_90031] = { + /* aka Typhoon "TV+Radio", Art.Nr 90031 */ + /* Tom Zoerner */ + .name = "Typhoon TV+Radio 90031", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_ELSA] = { + .name = "ELSA EX-VISION 300TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_HITACHI_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 4, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_ELSA_500TV] = { + .name = "ELSA EX-VISION 500TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_HITACHI_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 7, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 8, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 8, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_ELSA_700TV] = { + .name = "ELSA EX-VISION 700TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_HITACHI_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 4, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 6, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 7, + .amux = LINE1, + }}, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, + [SAA7134_BOARD_ASUSTeK_TVFM7134] = { + .name = "ASUS TV-FM 7134", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 4, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_ASUSTeK_TVFM7135] = { + .name = "ASUS TV-FM 7135", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x0000, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 4, + .amux = LINE2, + .gpio = 0x0000, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE2, + .gpio = 0x0000, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x200000, + }, + .mute = { + .name = name_mute, + .gpio = 0x0000, + }, + + }, + [SAA7134_BOARD_VA1000POWER] = { + .name = "AOPEN VA1000 POWER", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_10MOONSTVMASTER] = { + /* "lilicheng" */ + .name = "10MOONS PCI TV CAPTURE CARD", + .audio_clock = 0x00200000, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0xe000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x4000, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x4000, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x4000, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x2000, + }, + .mute = { + .name = name_mute, + .amux = LINE2, + .gpio = 0x8000, + }, + }, + [SAA7134_BOARD_BMK_MPEX_NOTUNER] = { + /* "Andrew de Quincey" */ + .name = "BMK MPEX No Tuner", + .audio_clock = 0x200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .empress_addr = 0x20, + .inputs = {{ + .name = name_comp1, + .vmux = 4, + .amux = LINE1, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_comp3, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_comp4, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + }, + [SAA7134_BOARD_VIDEOMATE_TV] = { + .name = "Compro VideoMate TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUS] = { + .name = "Compro VideoMate TV Gold+", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .gpiomask = 0x800c0000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x06c00012, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x0ac20012, + },{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .gpio = 0x08c20012, + .tv = 1, + }}, /* radio and probably mute is missing */ + }, + [SAA7134_BOARD_CRONOS_PLUS] = { + /* + gpio pins: + 0 .. 3 BASE_ID + 4 .. 7 PROTECT_ID + 8 .. 11 USER_OUT + 12 .. 13 USER_IN + 14 .. 15 VIDIN_SEL + */ + .name = "Matrox CronosPlus", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0xcf00, + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .gpio = 2 << 14, + },{ + .name = name_comp2, + .vmux = 0, + .gpio = 1 << 14, + },{ + .name = name_comp3, + .vmux = 0, + .gpio = 0 << 14, + },{ + .name = name_comp4, + .vmux = 0, + .gpio = 3 << 14, + },{ + .name = name_svideo, + .vmux = 8, + .gpio = 2 << 14, + }}, + }, + [SAA7134_BOARD_MD2819] = { + .name = "AverMedia M156 / Medion 2819", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x03, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x02, + }, { + .name = name_comp2, + .vmux = 0, + .amux = LINE1, + .gpio = 0x02, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x02, + } }, + .radio = { + .name = name_radio, + .amux = LINE1, + .gpio = 0x01, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x00, + }, + }, + [SAA7134_BOARD_BMK_MPEX_TUNER] = { + /* "Greg Wickham */ + .name = "BMK MPEX Tuner", + .audio_clock = 0x200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .empress_addr = 0x20, + .inputs = {{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }}, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + }, + [SAA7134_BOARD_ASUSTEK_TVFM7133] = { + .name = "ASUS TV-FM 7133", + .audio_clock = 0x00187de7, + /* probably wrong, the 7133 one is the NTSC version ... + * .tuner_type = TUNER_PHILIPS_FM1236_MK3 */ + .tuner_type = TUNER_LG_NTSC_NEW_TAPC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + + },{ + .name = name_comp1, + .vmux = 4, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_PINNACLE_PCTV_STEREO] = { + .name = "Pinnacle PCTV Stereo (saa7134)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_MT2032, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_MANLI_MTV002] = { + /* Ognjen Nastic */ + .name = "Manli MuchTV M-TV002", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_MANLI_MTV001] = { + /* Ognjen Nastic UNTESTED */ + .name = "Manli MuchTV M-TV001", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_TG3000TV] = { + /* TransGear 3000TV */ + .name = "Nagase Sangyo TransGear 3000TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_ECS_TVP3XP] = { + .name = "Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM) ", + .audio_clock = 0x187de7, /* xtal 32.1 MHz */ + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = "CVid over SVid", + .vmux = 0, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_ECS_TVP3XP_4CB5] = { + .name = "Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM)", + .audio_clock = 0x187de7, + .tuner_type = TUNER_PHILIPS_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = "CVid over SVid", + .vmux = 0, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_ECS_TVP3XP_4CB6] = { + /* Barry Scott */ + .name = "Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM)", + .audio_clock = 0x187de7, + .tuner_type = TUNER_PHILIPS_PAL_I, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = "CVid over SVid", + .vmux = 0, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_AVACSSMARTTV] = { + /* Roman Pszonczenko */ + .name = "AVACS SmartTV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x200000, + }, + }, + [SAA7134_BOARD_AVERMEDIA_DVD_EZMAKER] = { + /* Michael Smith */ + .name = "AVerMedia DVD EZMaker", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_comp1, + .vmux = 3, + },{ + .name = name_svideo, + .vmux = 8, + }}, + }, + [SAA7134_BOARD_AVERMEDIA_M103] = { + /* Massimo Piccioni */ + .name = "AVerMedia MiniPCI DVB-T Hybrid M103", + .audio_clock = 0x187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + } }, + }, + [SAA7134_BOARD_NOVAC_PRIMETV7133] = { + /* toshii@netbsd.org */ + .name = "Noval Prime TV 7133", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ALPS_TSBH1_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_comp1, + .vmux = 3, + },{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_svideo, + .vmux = 8, + }}, + }, + [SAA7134_BOARD_AVERMEDIA_STUDIO_305] = { + .name = "AverMedia AverTV Studio 305", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1256_IH3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_AVERMEDIA_STUDIO_505] = { + /* Vasiliy Temnikov */ + .name = "AverMedia AverTV Studio 505", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_UPMOST_PURPLE_TV] = { + .name = "UPMOST PURPLE TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 7, + .amux = TV, + .tv = 1, + },{ + .name = name_svideo, + .vmux = 7, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_ITEMS_MTV005] = { + /* Norman Jonas */ + .name = "Items MuchTV Plus / IT-005", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_CINERGY200] = { + .name = "Terratec Cinergy 200 TV", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 4, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp2, /* CVideo over SVideo Connector */ + .vmux = 0, + .amux = LINE1, + }}, + .mute = { + .name = name_mute, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_VIDEOMATE_TV_PVR] = { + /* Alain St-Denis */ + .name = "Compro VideoMate TV PVR/FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x808c0080, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x00080, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x00080, + },{ + .name = name_tv, + .vmux = 1, + .amux = LINE2_LEFT, + .tv = 1, + .gpio = 0x00080, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x80000, + }, + .mute = { + .name = name_mute, + .amux = LINE2, + .gpio = 0x40000, + }, + }, + [SAA7134_BOARD_SABRENT_SBTTVFM] = { + /* Michael Rodriguez-Torrent */ + .name = "Sabrent SBT-TVFM (saa7130)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_ZOLID_XPERT_TV7134] = { + /* Helge Jensen */ + .name = ":Zolid Xpert TV7134", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_EMPIRE_PCI_TV_RADIO_LE] = { + /* "Matteo Az" ;-) */ + .name = "Empire PCI TV-Radio LE", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x4000, + .inputs = {{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x8000, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x8000, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + .gpio = 0x8000, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + .gpio = 0x8000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio =0x8000, + } + }, + [SAA7134_BOARD_AVERMEDIA_STUDIO_307] = { + /* + Nickolay V. Shmyrev + Lots of thanks to Andrey Zolotarev + */ + .name = "Avermedia AVerTV Studio 307", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1256_IH3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x03, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00, + },{ + .name = name_comp, + .vmux = 3, + .amux = LINE1, + .gpio = 0x02, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x02, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + .gpio = 0x01, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + .gpio = 0x00, + }, + }, + [SAA7134_BOARD_AVERMEDIA_GO_007_FM] = { + .name = "Avermedia AVerTV GO 007 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00300003, + /* .gpiomask = 0x8c240003, */ + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x01, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + .gpio = 0x02, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + .gpio = 0x02, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00300001, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x01, + }, + }, + [SAA7134_BOARD_AVERMEDIA_CARDBUS] = { + /* Kees.Blom@cwi.nl */ + .name = "AVerMedia Cardbus TV/Radio (E500)", + .audio_clock = 0x187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_AVERMEDIA_CARDBUS_501] = { + /* Oldrich Jedlicka */ + .name = "AVerMedia Cardbus TV/Radio (E501R)", + .audio_clock = 0x187de7, + .tuner_type = TUNER_ALPS_TSBE5_PAL, + .radio_type = TUNER_TEA5767, + .tuner_addr = 0x61, + .radio_addr = 0x60, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x08000000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x08000000, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x08000000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x08000000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x00000000, + }, + }, + [SAA7134_BOARD_CINERGY400_CARDBUS] = { + .name = "Terratec Cinergy 400 mobile", + .audio_clock = 0x187de7, + .tuner_type = TUNER_ALPS_TSBE5_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_CINERGY600_MK3] = { + .name = "Terratec Cinergy 600 TV MK3", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 4, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp2, /* CVideo over SVideo Connector */ + .vmux = 0, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_VIDEOMATE_GOLD_PLUS] = { + /* Dylan Walkden */ + .name = "Compro VideoMate Gold+ Pal", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x1ce780, + .inputs = {{ + .name = name_svideo, + .vmux = 0, /* CVideo over SVideo Connector - ok? */ + .amux = LINE1, + .gpio = 0x008080, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x008080, + },{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x008080, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x80000, + }, + .mute = { + .name = name_mute, + .amux = LINE2, + .gpio = 0x0c8000, + }, + }, + [SAA7134_BOARD_PINNACLE_300I_DVBT_PAL] = { + .name = "Pinnacle PCTV 300i DVB-T + PAL", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_MT2032, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_PROVIDEO_PV952] = { + /* andreas.kretschmer@web.de */ + .name = "ProVideo PV952", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_AVERMEDIA_305] = { + /* much like the "studio" version but without radio + * and another tuner (sirspiritus@yandex.ru) */ + .name = "AverMedia AverTV/305", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_FLYDVBTDUO] = { + /* LifeView FlyDVB-T DUO */ + /* "Nico Sabbi Hartmut Hackmann hartmut.hackmann@t-online.de*/ + .name = "LifeView FlyDVB-T DUO / MSI TV@nywhere Duo", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00200000, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x200000, /* GPIO21=High for TV input */ + .tv = 1, + },{ + .name = name_comp1, /* Composite signal on S-Video input */ + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, /* S-Video signal on S-Video input */ + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */ + }, + }, + [SAA7134_BOARD_PHILIPS_TOUGH] = { + .name = "Philips TOUGH DVB-T reference design", + .tuner_type = TUNER_ABSENT, + .audio_clock = 0x00187de7, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_AVERMEDIA_307] = { + /* + Davydov Vladimir + */ + .name = "Avermedia AVerTV 307", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_ADS_INSTANT_TV] = { + .name = "ADS Tech Instant TV (saa7135)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_KWORLD_VSTREAM_XPERT] = { + .name = "Kworld/Tevion V-Stream Xpert TV PVR7134", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_PAL_I, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x0700, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x000, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x200, /* gpio by DScaler */ + },{ + .name = name_svideo, + .vmux = 0, + .amux = LINE1, + .gpio = 0x200, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + .gpio = 0x100, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x000, + }, + }, + [SAA7134_BOARD_FLYDVBT_DUO_CARDBUS] = { + .name = "LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x00200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x200000, /* GPIO21=High for TV input */ + .tv = 1, + },{ + .name = name_svideo, /* S-Video signal on S-Video input */ + .vmux = 8, + .amux = LINE2, + },{ + .name = name_comp1, /* Composite signal on S-Video input */ + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */ + }, + }, + [SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII] = { + .name = "Compro VideoMate TV Gold+II", + .audio_clock = 0x002187de7, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .radio_type = TUNER_TEA5767, + .tuner_addr = 0x63, + .radio_addr = 0x60, + .gpiomask = 0x8c1880, + .inputs = {{ + .name = name_svideo, + .vmux = 0, + .amux = LINE1, + .gpio = 0x800800, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x801000, + },{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x800000, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x880000, + }, + .mute = { + .name = name_mute, + .amux = LINE2, + .gpio = 0x840000, + }, + }, + [SAA7134_BOARD_KWORLD_XPERT] = { + /* + FIXME: + - Remote control doesn't initialize properly. + - Audio volume starts muted, + then gradually increases after channel change. + - Overlay scaling problems (application error?) + - Composite S-Video untested. + From: Konrad Rzepecki + */ + .name = "Kworld Xpert TV PVR7134", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_TENA_9533_DI, + .radio_type = TUNER_TEA5767, + .tuner_addr = 0x61, + .radio_addr = 0x60, + .gpiomask = 0x0700, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x000, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x200, /* gpio by DScaler */ + },{ + .name = name_svideo, + .vmux = 0, + .amux = LINE1, + .gpio = 0x200, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + .gpio = 0x100, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x000, + }, + }, + [SAA7134_BOARD_FLYTV_DIGIMATRIX] = { + .name = "FlyTV mini Asus Digimatrix", + .audio_clock = 0x00200000, + .tuner_type = TUNER_LG_TALN, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, /* radio unconfirmed */ + .amux = LINE2, + }, + }, + [SAA7134_BOARD_KWORLD_TERMINATOR] = { + /* Kworld V-Stream Studio TV Terminator */ + /* "James Webb */ + .name = "V-Stream Studio TV Terminator", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 1 << 21, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x0000000, + .tv = 1, + },{ + .name = name_comp1, /* Composite input */ + .vmux = 3, + .amux = LINE2, + .gpio = 0x0000000, + },{ + .name = name_svideo, /* S-Video input */ + .vmux = 8, + .amux = LINE2, + .gpio = 0x0000000, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_YUAN_TUN900] = { + /* FIXME: + * S-Video and composite sources untested. + * Radio not working. + * Remote control not yet implemented. + * From : codemaster@webgeeks.be */ + .name = "Yuan TUN-900 (saa7135)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr= ADDR_UNSET, + .radio_addr= ADDR_UNSET, + .gpiomask = 0x00010003, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x01, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x02, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE2, + .gpio = 0x02, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + .gpio = 0x00010003, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x01, + }, + }, + [SAA7134_BOARD_BEHOLD_409FM] = { + /* , Sergey */ + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 409 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_GOTVIEW_7135] = { + /* Mike Baikov */ + /* Andrey Cvetcov */ + .name = "GoTView 7135 PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00200003, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00200003, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x00200003, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x00200003, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x00200003, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x00200003, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x00200003, + }, + }, + [SAA7134_BOARD_PHILIPS_EUROPA] = { + .name = "Philips EUROPA V3 reference design", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TD1316, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_VIDEOMATE_DVBT_300] = { + .name = "Compro Videomate DVB-T300", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TD1316, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_VIDEOMATE_DVBT_200] = { + .name = "Compro Videomate DVB-T200", + .tuner_type = TUNER_ABSENT, + .audio_clock = 0x00187de7, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_RTD_VFG7350] = { + .name = "RTD Embedded Technologies VFG7350", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .empress_addr = 0x21, + .inputs = {{ + .name = "Composite 0", + .vmux = 0, + .amux = LINE1, + },{ + .name = "Composite 1", + .vmux = 1, + .amux = LINE2, + },{ + .name = "Composite 2", + .vmux = 2, + .amux = LINE1, + },{ + .name = "Composite 3", + .vmux = 3, + .amux = LINE2, + },{ + .name = "S-Video 0", + .vmux = 8, + .amux = LINE1, + },{ + .name = "S-Video 1", + .vmux = 9, + .amux = LINE2, + }}, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + .vid_port_opts = ( SET_T_CODE_POLARITY_NON_INVERTED | + SET_CLOCK_NOT_DELAYED | + SET_CLOCK_INVERTED | + SET_VSYNC_OFF ), + }, + [SAA7134_BOARD_RTD_VFG7330] = { + .name = "RTD Embedded Technologies VFG7330", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = "Composite 0", + .vmux = 0, + .amux = LINE1, + },{ + .name = "Composite 1", + .vmux = 1, + .amux = LINE2, + },{ + .name = "Composite 2", + .vmux = 2, + .amux = LINE1, + },{ + .name = "Composite 3", + .vmux = 3, + .amux = LINE2, + },{ + .name = "S-Video 0", + .vmux = 8, + .amux = LINE1, + },{ + .name = "S-Video 1", + .vmux = 9, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_FLYTVPLATINUM_MINI2] = { + .name = "LifeView FlyTV Platinum Mini2", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, /* Composite signal on S-Video input */ + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180] = { + /* Michael Krufky + * Uses Alps Electric TDHU2, containing NXT2004 ATSC Decoder + * AFAIK, there is no analog demod, thus, + * no support for analog television. + */ + .name = "AVerMedia AVerTVHD MCE A180", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_MONSTERTV_MOBILE] = { + .name = "SKNet MonsterTV Mobile", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_PINNACLE_PCTV_110i] = { + .name = "Pinnacle PCTV 40i/50i/110i (saa7133)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x080200000, + .inputs = { { + .name = name_tv, + .vmux = 4, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + }, { + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_ASUSTeK_P7131_DUAL] = { + .name = "ASUSTeK P7131 Dual", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 1 << 21, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x0000000, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + .gpio = 0x0200000, + },{ + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + .gpio = 0x0200000, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x0200000, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_SEDNA_PC_TV_CARDBUS] = { + /* Paul Tom Zalac */ + /* Pavel Mihaylov */ + .name = "Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)", + /* Sedna/MuchTV (OEM) Cardbus TV Tuner */ + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0xe880c0, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_ASUSTEK_DIGIMATRIX_TV] = { + /* "Cyril Lacoux (Yack)" */ + .name = "ASUS Digimatrix TV", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .tda9887_conf = TDA9887_PRESENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_PHILIPS_TIGER] = { + .name = "Philips Tiger reference design", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_MSI_TVATANYWHERE_PLUS] = { + .name = "MSI TV@Anywhere plus", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 1 << 21, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, /* unconfirmed, taken from Philips driver */ + },{ + .name = name_comp2, + .vmux = 0, /* untested, Composite over S-Video */ + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_CINERGY250PCI] = { + /* remote-control does not work. The signal about a + key press comes in via gpio, but the key code + doesn't. Neither does it have an i2c remote control + interface. */ + .name = "Terratec Cinergy 250 PCI TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x80200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_svideo, /* NOT tested */ + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_FLYDVB_TRIO] = { + /* LifeView LR319 FlyDVB Trio */ + /* Peter Missel */ + .name = "LifeView FlyDVB Trio", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00200000, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, /* Analog broadcast/cable TV */ + .vmux = 1, + .amux = TV, + .gpio = 0x200000, /* GPIO21=High for TV input */ + .tv = 1, + },{ + .name = name_svideo, /* S-Video signal on S-Video input */ + .vmux = 8, + .amux = LINE2, + },{ + .name = name_comp1, /* Composite signal on S-Video input */ + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */ + }, + }, + [SAA7134_BOARD_AVERMEDIA_777] = { + .name = "AverTV DVB-T 777", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_FLYDVBT_LR301] = { + /* LifeView FlyDVB-T */ + /* Giampiero Giancipoli */ + .name = "LifeView FlyDVB-T / Genius VideoWonder DVB-T", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, /* Composite input */ + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, /* S-Video signal on S-Video input */ + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331] = { + .name = "ADS Instant TV Duo Cardbus PTV331", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */ + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00200000, + }}, + }, + [SAA7134_BOARD_TEVION_DVBT_220RF] = { + .name = "Tevion/KWorld DVB-T 220RF", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 1 << 21, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_comp2, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_KWORLD_DVBT_210] = { + .name = "KWorld DVB-T 210", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 1 << 21, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_KWORLD_ATSC110] = { + .name = "Kworld ATSC110/115", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TUV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_AVERMEDIA_A169_B] = { + /* AVerMedia A169 */ + /* Rickard Osser */ + /* This card has two saa7134 chips on it, + but only one of them is currently working. */ + .name = "AVerMedia A169 B", + .audio_clock = 0x02187de7, + .tuner_type = TUNER_LG_TALN, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x0a60000, + }, + [SAA7134_BOARD_AVERMEDIA_A169_B1] = { + /* AVerMedia A169 */ + /* Rickard Osser */ + .name = "AVerMedia A169 B1", + .audio_clock = 0x02187de7, + .tuner_type = TUNER_LG_TALN, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0xca60000, + .inputs = {{ + .name = name_tv, + .vmux = 4, + .amux = TV, + .tv = 1, + .gpio = 0x04a61000, + },{ + .name = name_comp2, /* Composite SVIDEO (B/W if signal is carried with SVIDEO) */ + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 9, /* 9 is correct as S-VIDEO1 according to a169.inf! */ + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_MD7134_BRIDGE_2] = { + /* The second saa7134 on this card only serves as DVB-S host bridge */ + .name = "Medion 7134 Bridge #2", + .audio_clock = 0x00187de7, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + }, + [SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS] = { + .name = "LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */ + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x200000, /* GPIO21=High for TV input */ + .tv = 1, + },{ + .name = name_svideo, /* S-Video signal on S-Video input */ + .vmux = 8, + .amux = LINE2, + },{ + .name = name_comp1, /* Composite signal on S-Video input */ + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */ + }, + }, + [SAA7134_BOARD_FLYVIDEO3000_NTSC] = { + /* "Zac Bowling" */ + .name = "LifeView FlyVIDEO3000 (NTSC)", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .gpiomask = 0xe000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x8000, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x4000, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x4000, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x4000, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x2000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x8000, + }, + }, + [SAA7134_BOARD_MEDION_MD8800_QUADRO] = { + .name = "Medion Md8800 Quadro", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_FLYDVBS_LR300] = { + /* LifeView FlyDVB-s */ + /* Igor M. Liplianin */ + .name = "LifeView FlyDVB-S /Acorp TV134DS", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, /* Composite input */ + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, /* S-Video signal on S-Video input */ + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_PROTEUS_2309] = { + .name = "Proteus Pro 2309", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_AVERMEDIA_A16AR] = { + /* Petr Baudis */ + .name = "AVerMedia TV Hybrid A16AR", + .audio_clock = 0x187de7, + .tuner_type = TUNER_PHILIPS_TD1316, /* untested */ + .radio_type = TUNER_TEA5767, /* untested */ + .tuner_addr = ADDR_UNSET, + .radio_addr = 0x60, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_ASUS_EUROPA2_HYBRID] = { + .name = "Asus Europa2 OEM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT| TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 4, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_PINNACLE_PCTV_310i] = { + .name = "Pinnacle PCTV 310i", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_ON }, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x000200000, + .inputs = {{ + .name = name_tv, + .vmux = 4, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_AVERMEDIA_STUDIO_507] = { + /* Mikhail Fedotov */ + .name = "Avermedia AVerTV Studio 507", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1256_IH3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x03, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x00, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x00, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x00, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x01, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + .gpio = 0x00, + }, + }, + [SAA7134_BOARD_VIDEOMATE_DVBT_200A] = { + /* Francis Barber */ + .name = "Compro Videomate DVB-T200A", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_HAUPPAUGE_HVR1110] = { + /* Thomas Genty */ + /* David Bentham */ + .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_ON }, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200100, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x0000100, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200100, + }, + }, + [SAA7134_BOARD_HAUPPAUGE_HVR1150] = { + .name = "Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_ON_BRIDGE }, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_SERIAL, + .ts_force_val = 1, + .gpiomask = 0x0800100, /* GPIO 21 is an INPUT */ + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x0000100, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0800100, /* GPIO 23 HI for FM */ + }, + }, + [SAA7134_BOARD_HAUPPAUGE_HVR1120] = { + .name = "Hauppauge WinTV-HVR1120 DVB-T/Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_ON_BRIDGE }, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_SERIAL, + .gpiomask = 0x0800100, /* GPIO 21 is an INPUT */ + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x0000100, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0800100, /* GPIO 23 HI for FM */ + }, + }, + [SAA7134_BOARD_CINERGY_HT_PCMCIA] = { + .name = "Terratec Cinergy HT PCMCIA", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_ENCORE_ENLTV] = { + /* Steven Walter + Juan Pablo Sormani */ + .name = "Encore ENLTV", + .audio_clock = 0x00200000, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = 3, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 7, + .amux = 4, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = 2, + },{ + .name = name_svideo, + .vmux = 0, + .amux = 2, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, +/* .gpio = 0x00300001,*/ + .gpio = 0x20000, + + }, + .mute = { + .name = name_mute, + .amux = 0, + }, + }, + [SAA7134_BOARD_ENCORE_ENLTV_FM] = { + /* Juan Pablo Sormani */ + .name = "Encore ENLTV-FM", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FCV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = 3, + .tv = 1, + },{ + .name = name_tv_mono, + .vmux = 7, + .amux = 4, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = 2, + },{ + .name = name_svideo, + .vmux = 0, + .amux = 2, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x20000, + + }, + .mute = { + .name = name_mute, + .amux = 0, + }, + }, + [SAA7134_BOARD_ENCORE_ENLTV_FM53] = { + .name = "Encore ENLTV-FM v5.3", + .audio_clock = 0x00200000, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x7000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = 1, + .tv = 1, + .gpio = 0x50000, + }, { + .name = name_comp1, + .vmux = 3, + .amux = 2, + .gpio = 0x2000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = 2, + .gpio = 0x2000, + } }, + .radio = { + .name = name_radio, + .vmux = 1, + .amux = 1, + }, + .mute = { + .name = name_mute, + .gpio = 0xf000, + .amux = 0, + }, + }, + [SAA7134_BOARD_ENCORE_ENLTV_FM3] = { + .name = "Encore ENLTV-FM 3", + .audio_clock = 0x02187de7, + .tuner_type = TUNER_TENA_TNF_5337, + .radio_type = TUNER_TEA5767, + .tuner_addr = 0x61, + .radio_addr = 0x60, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .vmux = 1, + .amux = LINE1, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + .gpio = 0x43000, + }, + }, + [SAA7134_BOARD_CINERGY_HT_PCI] = { + .name = "Terratec Cinergy HT PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_PHILIPS_TIGER_S] = { + .name = "Philips Tiger - S Reference design", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_AVERMEDIA_M102] = { + .name = "Avermedia M102", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 1<<21, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_ASUS_P7131_4871] = { + .name = "ASUS P7131 4871", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x0200000, + }}, + }, + [SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA] = { + .name = "ASUSTeK P7131 Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_OFF }, + .gpiomask = 1 << 21, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x0000000, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + .gpio = 0x0200000, + },{ + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + .gpio = 0x0200000, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x0200000, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_ASUSTeK_P7131_ANALOG] = { + .name = "ASUSTeK P7131 Analog", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 1 << 21, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x0000000, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + }, { + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_SABRENT_TV_PCB05] = { + .name = "Sabrent PCMCIA TV-PCB05", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_comp2, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, + [SAA7134_BOARD_10MOONSTVMASTER3] = { + /* Tony Wan */ + .name = "10MOONS TM300 TV Card", + .audio_clock = 0x00200000, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x7000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x2000, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x2000, + }}, + .mute = { + .name = name_mute, + .amux = LINE2, + .gpio = 0x3000, + }, + }, + [SAA7134_BOARD_AVERMEDIA_SUPER_007] = { + .name = "Avermedia Super 007", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, /* FIXME: analog tv untested */ + .vmux = 1, + .amux = TV, + .tv = 1, + }}, + }, + [SAA7134_BOARD_AVERMEDIA_M135A] = { + .name = "Avermedia PCI pure analog (M135A)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_OFF }, + .gpiomask = 0x020200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00200000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x01, + }, + }, + [SAA7134_BOARD_AVERMEDIA_M733A] = { + .name = "Avermedia PCI M733A", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_OFF }, + .gpiomask = 0x020200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00200000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x01, + }, + }, + [SAA7134_BOARD_BEHOLD_401] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 401", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_BEHOLD_403] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 403", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_BEHOLD_403FM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 403 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_405] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 405", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_BEHOLD_405FM] = { + /* Sergey */ + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 405 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_407] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 407", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0xc0c000, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0xc0c000, + },{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + .gpio = 0xc0c000, + }}, + }, + [SAA7134_BOARD_BEHOLD_407FM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 407 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0xc0c000, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0xc0c000, + },{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + .gpio = 0xc0c000, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0xc0c000, + }, + }, + [SAA7134_BOARD_BEHOLD_409] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 409", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_BEHOLD_505FM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 505 FM", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_505RDS_MK5] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 505 RDS", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216MK5, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_507_9FM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 507 FM / BeholdTV 509 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_507RDS_MK5] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 507 RDS", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216MK5, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_507RDS_MK3] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 507 RDS", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = { + /* Beholder Intl. Ltd. 2008 */ + /* Dmitry Belimov */ + .name = "Beholder BeholdTV Columbus TV/FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ALPS_TSBE5_PAL, + .radio_type = TUNER_TEA5767, + .tuner_addr = 0xc2 >> 1, + .radio_addr = 0xc0 >> 1, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x000A8004, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + .gpio = 0x000A8004, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0x000A8000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x000A8000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x000A8000, + }, + }, + [SAA7134_BOARD_BEHOLD_607FM_MK3] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 607 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_609FM_MK3] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 609 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_607FM_MK5] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 607 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216MK5, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_609FM_MK5] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 609 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216MK5, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_607RDS_MK3] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 607 RDS", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_609RDS_MK3] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 609 RDS", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_607RDS_MK5] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 607 RDS", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216MK5, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_609RDS_MK5] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 609 RDS", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216MK5, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_M6] = { + /* Igor Kuznetsov */ + /* Andrey Melnikoff */ + /* Beholder Intl. Ltd. Dmitry Belimov */ + /* Alexey Osipov */ + .name = "Beholder BeholdTV M6", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .empress_addr = 0x20, + .tda9887_conf = TDA9887_PRESENT, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + .vid_port_opts = (SET_T_CODE_POLARITY_NON_INVERTED | + SET_CLOCK_NOT_DELAYED | + SET_CLOCK_INVERTED | + SET_VSYNC_OFF), + }, + [SAA7134_BOARD_BEHOLD_M63] = { + /* Igor Kuznetsov */ + /* Andrey Melnikoff */ + /* Beholder Intl. Ltd. Dmitry Belimov */ + .name = "Beholder BeholdTV M63", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .empress_addr = 0x20, + .tda9887_conf = TDA9887_PRESENT, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + .vid_port_opts = (SET_T_CODE_POLARITY_NON_INVERTED | + SET_CLOCK_NOT_DELAYED | + SET_CLOCK_INVERTED | + SET_VSYNC_OFF), + }, + [SAA7134_BOARD_BEHOLD_M6_EXTRA] = { + /* Igor Kuznetsov */ + /* Andrey Melnikoff */ + /* Beholder Intl. Ltd. Dmitry Belimov */ + /* Alexey Osipov */ + .name = "Beholder BeholdTV M6 Extra", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216MK5, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .empress_addr = 0x20, + .tda9887_conf = TDA9887_PRESENT, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + .vid_port_opts = (SET_T_CODE_POLARITY_NON_INVERTED | + SET_CLOCK_NOT_DELAYED | + SET_CLOCK_INVERTED | + SET_VSYNC_OFF), + }, + [SAA7134_BOARD_TWINHAN_DTV_DVB_3056] = { + .name = "Twinhan Hybrid DTV-DVB 3056 PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, /* untested */ + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_GENIUS_TVGO_A11MCE] = { + /* Adrian Pardini */ + .name = "Genius TVGO AM11MCE", + .audio_clock = 0x00200000, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0xf000, + .inputs = {{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x2000, + .tv = 1 + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x2000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x1000, + }, + .mute = { + .name = name_mute, + .amux = LINE2, + .gpio = 0x6000, + }, + }, + [SAA7134_BOARD_PHILIPS_SNAKE] = { + .name = "NXP Snake DVB-S reference design", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_CREATIX_CTX953] = { + .name = "Medion/Creatix CTX953 Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_MSI_TVANYWHERE_AD11] = { + .name = "MSI TV@nywhere A/D v1.1", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_AVERMEDIA_CARDBUS_506] = { + .name = "AVerMedia Cardbus TV/Radio (E506R)", + .audio_clock = 0x187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_AVERMEDIA_A16D] = { + .name = "AVerMedia Hybrid TV/Radio (A16D)", + .audio_clock = 0x187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }, { + .name = name_comp, + .vmux = 0, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_AVERMEDIA_M115] = { + .name = "Avermedia M115", + .audio_clock = 0x187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + }, + [SAA7134_BOARD_VIDEOMATE_T750] = { + /* John Newbigin */ + .name = "Compro VideoMate T750", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + } + }, + [SAA7134_BOARD_AVERMEDIA_A700_PRO] = { + /* Matthias Schwarzott */ + .name = "Avermedia DVB-S Pro A700", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_comp, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_AVERMEDIA_A700_HYBRID] = { + /* Matthias Schwarzott */ + .name = "Avermedia DVB-S Hybrid+FM A700", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_tv, + .vmux = 4, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_BEHOLD_H6] = { + /* Igor Kuznetsov */ + .name = "Beholder BeholdTV H6", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FMD1216MEX_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_ASUSTeK_TIGER_3IN1] = { + .name = "Asus Tiger 3in1", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_OFF }, + .gpiomask = 1 << 21, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_ASUSTeK_PS3_100] = { + .name = "Asus My Cinema PS3-100", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_GP0_HIGH_OFF }, + .gpiomask = 1 << 21, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_REAL_ANGEL_220] = { + .name = "Zogis Real Angel 220", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x801a8087, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + .gpio = 0x624000, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0x624000, + }, { + .name = name_svideo, + .vmux = 1, + .amux = LINE1, + .gpio = 0x624000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x624001, + }, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, + [SAA7134_BOARD_ADS_INSTANT_HDTV_PCI] = { + .name = "ADS Tech Instant HDTV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TUV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 4, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_ASUSTeK_TIGER] = { + .name = "Asus Tiger Rev:1.00", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + }, { + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG] = { + .name = "Kworld Plus TV Analog Lite PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_YMEC_TVF_5533MF, + .radio_type = TUNER_TEA5767, + .tuner_addr = ADDR_UNSET, + .radio_addr = 0x60, + .gpiomask = 0x80000700, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + .gpio = 0x100, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x200, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x200, + } }, + .radio = { + .name = name_radio, + .vmux = 1, + .amux = LINE1, + .gpio = 0x100, + }, + .mute = { + .name = name_mute, + .vmux = 8, + .amux = 2, + }, + }, + [SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = { + .name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = ADDR_UNSET, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x8e054000, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, +#if 0 /* FIXME */ + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x200, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x200, +#endif + } }, +#if 0 + .radio = { + .name = name_radio, + .vmux = 1, + .amux = LINE1, + .gpio = 0x100, + }, +#endif + .mute = { + .name = name_mute, + .vmux = 0, + .amux = TV, + }, + }, + [SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS] = { + .name = "Avermedia AVerTV GO 007 FM Plus", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00300003, + /* .gpiomask = 0x8c240003, */ + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x01, + }, { + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + .gpio = 0x02, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00300001, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x01, + }, + }, + [SAA7134_BOARD_AVERMEDIA_STUDIO_507UA] = { + /* Andy Shevchenko */ + .name = "Avermedia AVerTV Studio 507UA", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* Should be MK5 */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x03, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x00, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x00, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x01, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + .gpio = 0x00, + }, + }, + [SAA7134_BOARD_VIDEOMATE_S350] = { + /* Jan D. Louw */ + .name = "Beholder BeholdTV X7", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_XC5000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_tv, + .vmux = 2, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 9, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_ZOLID_HYBRID_PCI] = { + .name = "Zolid Hybrid TV Tuner PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_OFF }, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + } }, + .radio = { /* untested */ + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_ASUS_EUROPA_HYBRID] = { + .name = "Asus Europa Hybrid OEM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TD1316, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 4, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + }, + [SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S] = { + .name = "Leadtek Winfast DTV1000S", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_comp1, + .vmux = 3, + }, { + .name = name_svideo, + .vmux = 8, + } }, + }, + [SAA7134_BOARD_BEHOLD_505RDS_MK3] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov */ + .name = "Beholder BeholdTV 505 RDS", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .rds_addr = 0x10, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_HAWELL_HW_404M7] = { + /* Hawell HW-404M7 & Hawell HW-808M7 */ + /* Bogoslovskiy Viktor */ + .name = "Hawell HW-404M7", + .audio_clock = 0x00200000, + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x389c00, + .inputs = {{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x01fc00, + } }, + }, + [SAA7134_BOARD_BEHOLD_H7] = { + /* Beholder Intl. Ltd. Dmitry Belimov */ + .name = "Beholder BeholdTV H7", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_XC5000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = { { + .name = name_tv, + .vmux = 2, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 9, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_BEHOLD_A7] = { + /* Beholder Intl. Ltd. Dmitry Belimov */ + .name = "Beholder BeholdTV A7", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_XC5000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = { { + .name = name_tv, + .vmux = 2, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 9, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_TECHNOTREND_BUDGET_T3000] = { + .name = "TechoTrend TT-budget T-3000", + .tuner_type = TUNER_PHILIPS_TD1316, + .audio_clock = 0x00187de7, + .radio_type = UNSET, + .tuner_addr = 0x63, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + }, + [SAA7134_BOARD_VIDEOMATE_M1F] = { + /* Pavel Osnova */ + .name = "Compro VideoMate Vista M1F", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .radio_type = TUNER_TEA5767, + .tuner_addr = ADDR_UNSET, + .radio_addr = 0x60, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, + [SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2] = { + /* Timothy Lee */ + .name = "MagicPro ProHDTV Pro2 DMB-TH/Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_ON_BRIDGE }, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x02050000, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00050000, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x00050000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x00050000, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00050000, + }, + .mute = { + .name = name_mute, + .vmux = 0, + .amux = TV, + .gpio = 0x00050000, + }, + }, + [SAA7134_BOARD_BEHOLD_501] = { + /* Beholder Intl. Ltd. 2010 */ + /* Dmitry Belimov */ + .name = "Beholder BeholdTV 501", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00008000, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_BEHOLD_503FM] = { + /* Beholder Intl. Ltd. 2010 */ + /* Dmitry Belimov */ + .name = "Beholder BeholdTV 503 FM", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x00008000, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_SENSORAY811_911] = { + .name = "Sensoray 811/911", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + }, { + .name = name_comp3, + .vmux = 2, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_KWORLD_PC150U] = { + .name = "Kworld PC150-U", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 1 << 21, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0000000, + }, + }, + [SAA7134_BOARD_HAWELL_HW_9004V1] = { + /* Hawell HW-9004V1 */ + /* Vadim Frolov */ + .name = "Hawell HW-9004V1", + .audio_clock = 0x00200000, + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x618E700, + .inputs = {{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x6010000, + } }, + }, + [SAA7134_BOARD_AVERMEDIA_A706] = { + .name = "AverMedia AverTV Satellite Hybrid+FM A706", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda829x_conf = { .lna_cfg = TDA8290_LNA_OFF, + .no_i2c_gate = 1, + .tda18271_std_map = &aver_a706_std_map }, + .gpiomask = 1 << 11, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 4, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0000800, + }, + }, + +}; + +const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); + +/* ------------------------------------------------------------------ */ +/* PCI ids + subsystem IDs */ + +struct pci_device_id saa7134_pci_tbl[] = { + { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2001, + .driver_data = SAA7134_BOARD_PROTEUS_PRO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2001, + .driver_data = SAA7134_BOARD_PROTEUS_PRO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x6752, + .driver_data = SAA7134_BOARD_EMPRESS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1131, + .subdevice = 0x4e85, + .driver_data = SAA7134_BOARD_MONSTERTV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x153b, + .subdevice = 0x1142, + .driver_data = SAA7134_BOARD_CINERGY400, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x153b, + .subdevice = 0x1143, + .driver_data = SAA7134_BOARD_CINERGY600, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x153b, + .subdevice = 0x1158, + .driver_data = SAA7134_BOARD_CINERGY600_MK3, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x153b, + .subdevice = 0x1162, + .driver_data = SAA7134_BOARD_CINERGY400_CARDBUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5169, + .subdevice = 0x0138, + .driver_data = SAA7134_BOARD_FLYVIDEO3000_NTSC, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5168, + .subdevice = 0x0138, + .driver_data = SAA7134_BOARD_FLYVIDEO3000, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x4e42, /* "Typhoon PCI Capture TV Card" Art.No. 50673 */ + .subdevice = 0x0138, + .driver_data = SAA7134_BOARD_FLYVIDEO3000, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x5168, + .subdevice = 0x0138, + .driver_data = SAA7134_BOARD_FLYVIDEO2000, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x4e42, /* Typhoon */ + .subdevice = 0x0138, /* LifeView FlyTV Prime30 OEM */ + .driver_data = SAA7134_BOARD_FLYVIDEO2000, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, + .subdevice = 0x0212, /* minipci, LR212 */ + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_MINI, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x14c0, + .subdevice = 0x1212, /* minipci, LR1212 */ + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_MINI2, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x4e42, + .subdevice = 0x0212, /* OEM minipci, LR212 */ + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_MINI, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, /* Animation Technologies (LifeView) */ + .subdevice = 0x0214, /* Standard PCI, LR214 Rev E and earlier (SAA7135) */ + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, /* Animation Technologies (LifeView) */ + .subdevice = 0x5214, /* Standard PCI, LR214 Rev F onwards (SAA7131) */ + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1489, /* KYE */ + .subdevice = 0x0214, /* Genius VideoWonder ProTV */ + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM, /* is an LR214WF actually */ + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x16be, + .subdevice = 0x0003, + .driver_data = SAA7134_BOARD_MD7134, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x16be, /* CTX946 analog TV, HW mpeg, DVB-T */ + .subdevice = 0x5000, /* only analog TV and DVB-T for now */ + .driver_data = SAA7134_BOARD_MD7134, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1048, + .subdevice = 0x226b, + .driver_data = SAA7134_BOARD_ELSA, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1048, + .subdevice = 0x226a, + .driver_data = SAA7134_BOARD_ELSA_500TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1048, + .subdevice = 0x226c, + .driver_data = SAA7134_BOARD_ELSA_700TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_ASUSTEK, + .subdevice = 0x4842, + .driver_data = SAA7134_BOARD_ASUSTeK_TVFM7134, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_VENDOR_ID_ASUSTEK, + .subdevice = 0x4845, + .driver_data = SAA7134_BOARD_ASUSTeK_TVFM7135, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_ASUSTEK, + .subdevice = 0x4830, + .driver_data = SAA7134_BOARD_ASUSTeK_TVFM7134, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_VENDOR_ID_ASUSTEK, + .subdevice = 0x4843, + .driver_data = SAA7134_BOARD_ASUSTEK_TVFM7133, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_ASUSTEK, + .subdevice = 0x4840, + .driver_data = SAA7134_BOARD_ASUSTeK_TVFM7134, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0xfe01, + .driver_data = SAA7134_BOARD_TVSTATION_RDS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1894, + .subdevice = 0xfe01, + .driver_data = SAA7134_BOARD_TVSTATION_RDS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1894, + .subdevice = 0xa006, + .driver_data = SAA7134_BOARD_TVSTATION_DVR, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1131, + .subdevice = 0x7133, + .driver_data = SAA7134_BOARD_VA1000POWER, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2001, + .driver_data = SAA7134_BOARD_10MOONSTVMASTER, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x185b, + .subdevice = 0xc100, + .driver_data = SAA7134_BOARD_VIDEOMATE_TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x185b, + .subdevice = 0xc100, + .driver_data = SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = PCI_VENDOR_ID_MATROX, + .subdevice = 0x48d0, + .driver_data = SAA7134_BOARD_CRONOS_PLUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa70b, + .driver_data = SAA7134_BOARD_MD2819, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa7a1, + .driver_data = SAA7134_BOARD_AVERMEDIA_A700_PRO, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa7a2, + .driver_data = SAA7134_BOARD_AVERMEDIA_A700_HYBRID, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x2115, + .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_305, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa115, + .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_505, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x2108, + .driver_data = SAA7134_BOARD_AVERMEDIA_305, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x10ff, + .driver_data = SAA7134_BOARD_AVERMEDIA_DVD_EZMAKER, + },{ + /* AVerMedia CardBus */ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xd6ee, + .driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS, + },{ + /* AVerMedia CardBus */ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xb7e9, + .driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS_501, + }, { + /* TransGear 3000TV */ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x050c, + .driver_data = SAA7134_BOARD_TG3000TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x11bd, + .subdevice = 0x002b, + .driver_data = SAA7134_BOARD_PINNACLE_PCTV_STEREO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x11bd, + .subdevice = 0x002d, + .driver_data = SAA7134_BOARD_PINNACLE_300I_DVBT_PAL, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1019, + .subdevice = 0x4cb4, + .driver_data = SAA7134_BOARD_ECS_TVP3XP, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1019, + .subdevice = 0x4cb5, + .driver_data = SAA7134_BOARD_ECS_TVP3XP_4CB5, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1019, + .subdevice = 0x4cb6, + .driver_data = SAA7134_BOARD_ECS_TVP3XP_4CB6, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x12ab, + .subdevice = 0x0800, + .driver_data = SAA7134_BOARD_UPMOST_PURPLE_TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x153b, + .subdevice = 0x1152, + .driver_data = SAA7134_BOARD_CINERGY200, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x185b, + .subdevice = 0xc100, + .driver_data = SAA7134_BOARD_VIDEOMATE_TV_PVR, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x9715, + .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_307, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa70a, + .driver_data = SAA7134_BOARD_AVERMEDIA_307, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x185b, + .subdevice = 0xc200, + .driver_data = SAA7134_BOARD_VIDEOMATE_GOLD_PLUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1540, + .subdevice = 0x9524, + .driver_data = SAA7134_BOARD_PROVIDEO_PV952, + + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, + .subdevice = 0x0502, /* Cardbus version */ + .driver_data = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, + .subdevice = 0x0306, /* PCI version */ + .driver_data = SAA7134_BOARD_FLYDVBTDUO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf31f, + .driver_data = SAA7134_BOARD_AVERMEDIA_GO_007_FM, + + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf11d, + .driver_data = SAA7134_BOARD_AVERMEDIA_M135A, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x4155, + .driver_data = SAA7134_BOARD_AVERMEDIA_M733A, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x4255, + .driver_data = SAA7134_BOARD_AVERMEDIA_M733A, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2004, + .driver_data = SAA7134_BOARD_PHILIPS_TOUGH, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1421, + .subdevice = 0x0350, /* PCI version */ + .driver_data = SAA7134_BOARD_ADS_INSTANT_TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1421, + .subdevice = 0x0351, /* PCI version, new revision */ + .driver_data = SAA7134_BOARD_ADS_INSTANT_TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1421, + .subdevice = 0x0370, /* cardbus version */ + .driver_data = SAA7134_BOARD_ADS_INSTANT_TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1421, + .subdevice = 0x1370, /* cardbus version */ + .driver_data = SAA7134_BOARD_ADS_INSTANT_TV, + + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x4e42, /* Typhoon */ + .subdevice = 0x0502, /* LifeView LR502 OEM */ + .driver_data = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x0210, /* mini pci NTSC version */ + .driver_data = SAA7134_BOARD_FLYTV_DIGIMATRIX, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1043, + .subdevice = 0x0210, /* mini pci PAL/SECAM version */ + .driver_data = SAA7134_BOARD_ASUSTEK_DIGIMATRIX_TV, + + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, /* It shouldn't break anything, since subdevice id seems unique */ + .subdevice = 0x4091, + .driver_data = SAA7134_BOARD_BEHOLD_409FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5456, /* GoTView */ + .subdevice = 0x7135, + .driver_data = SAA7134_BOARD_GOTVIEW_7135, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2004, + .driver_data = SAA7134_BOARD_PHILIPS_EUROPA, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x185b, + .subdevice = 0xc900, + .driver_data = SAA7134_BOARD_VIDEOMATE_DVBT_300, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x185b, + .subdevice = 0xc901, + .driver_data = SAA7134_BOARD_VIDEOMATE_DVBT_200, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1435, + .subdevice = 0x7350, + .driver_data = SAA7134_BOARD_RTD_VFG7350, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1435, + .subdevice = 0x7330, + .driver_data = SAA7134_BOARD_RTD_VFG7330, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, + .subdevice = 0x1044, + .driver_data = SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1131, + .subdevice = 0x4ee9, + .driver_data = SAA7134_BOARD_MONSTERTV_MOBILE, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x11bd, + .subdevice = 0x002e, + .driver_data = SAA7134_BOARD_PINNACLE_PCTV_110i, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4862, + .driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2018, + .driver_data = SAA7134_BOARD_PHILIPS_TIGER, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1462, + .subdevice = 0x6231, /* tda8275a, ks003 IR */ + .driver_data = SAA7134_BOARD_MSI_TVATANYWHERE_PLUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1462, + .subdevice = 0x8624, /* tda8275, ks003 IR */ + .driver_data = SAA7134_BOARD_MSI_TVATANYWHERE_PLUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x153b, + .subdevice = 0x1160, + .driver_data = SAA7134_BOARD_CINERGY250PCI, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA 7131E */ + .subvendor = 0x5168, + .subdevice = 0x0319, + .driver_data = SAA7134_BOARD_FLYDVB_TRIO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, + .subdevice = 0x2c05, + .driver_data = SAA7134_BOARD_AVERMEDIA_777, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5168, + .subdevice = 0x0301, + .driver_data = SAA7134_BOARD_FLYDVBT_LR301, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0331, + .subdevice = 0x1421, + .driver_data = SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x17de, + .subdevice = 0x7201, + .driver_data = SAA7134_BOARD_TEVION_DVBT_220RF, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x17de, + .subdevice = 0x7250, + .driver_data = SAA7134_BOARD_KWORLD_DVBT_210, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x17de, + .subdevice = 0x7350, + .driver_data = SAA7134_BOARD_KWORLD_ATSC110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x17de, + .subdevice = 0x7352, + .driver_data = SAA7134_BOARD_KWORLD_ATSC110, /* ATSC 115 */ + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x17de, + .subdevice = 0xa134, + .driver_data = SAA7134_BOARD_KWORLD_PC150U, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, + .subdevice = 0x7360, + .driver_data = SAA7134_BOARD_AVERMEDIA_A169_B, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, + .subdevice = 0x6360, + .driver_data = SAA7134_BOARD_AVERMEDIA_A169_B1, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x16be, + .subdevice = 0x0005, + .driver_data = SAA7134_BOARD_MD7134_BRIDGE_2, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5168, + .subdevice = 0x0300, + .driver_data = SAA7134_BOARD_FLYDVBS_LR300, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x4e42, + .subdevice = 0x0300,/* LR300 */ + .driver_data = SAA7134_BOARD_FLYDVBS_LR300, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1489, + .subdevice = 0x0301, + .driver_data = SAA7134_BOARD_FLYDVBT_LR301, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, /* Animation Technologies (LifeView) */ + .subdevice = 0x0304, + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, + .subdevice = 0x3306, + .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, + .subdevice = 0x3502, /* whats the difference to 0x3306 ?*/ + .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5168, + .subdevice = 0x3307, /* FlyDVB-T Hybrid Mini PCI */ + .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x16be, + .subdevice = 0x0007, + .driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x16be, + .subdevice = 0x0008, + .driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x16be, + .subdevice = 0x000d, /* triple CTX948_V1.1.1 */ + .driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, + .subdevice = 0x2c05, + .driver_data = SAA7134_BOARD_AVERMEDIA_777, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1489, + .subdevice = 0x0502, /* Cardbus version */ + .driver_data = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0919, /* Philips Proteus PRO 2309 */ + .subdevice = 0x2003, + .driver_data = SAA7134_BOARD_PROTEUS_2309, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, + .subdevice = 0x2c00, + .driver_data = SAA7134_BOARD_AVERMEDIA_A16AR, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1043, + .subdevice = 0x4860, + .driver_data = SAA7134_BOARD_ASUS_EUROPA2_HYBRID, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x11bd, + .subdevice = 0x002f, + .driver_data = SAA7134_BOARD_PINNACLE_PCTV_310i, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x9715, + .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_507, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa11b, + .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_507UA, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4876, + .driver_data = SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6700, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6701, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6702, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6703, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6704, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6705, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6706, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6707, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6708, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6709, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x670a, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x153b, + .subdevice = 0x1172, + .driver_data = SAA7134_BOARD_CINERGY_HT_PCMCIA, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2342, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1131, + .subdevice = 0x2341, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x3016, + .subdevice = 0x2344, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1131, + .subdevice = 0x230f, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1a7f, + .subdevice = 0x2008, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM53, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1a7f, + .subdevice = 0x2108, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM3, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x153b, + .subdevice = 0x1175, + .driver_data = SAA7134_BOARD_CINERGY_HT_PCI, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf31e, + .driver_data = SAA7134_BOARD_AVERMEDIA_M102, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x4E42, /* MSI */ + .subdevice = 0x0306, /* TV@nywhere DUO */ + .driver_data = SAA7134_BOARD_FLYDVBTDUO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4871, + .driver_data = SAA7134_BOARD_ASUS_P7131_4871, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4857, /* REV:1.00 */ + .driver_data = SAA7134_BOARD_ASUSTeK_TIGER, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0919, /* SinoVideo PCI 2309 Proteus (7134) */ + .subdevice = 0x2003, /* OEM cardbus */ + .driver_data = SAA7134_BOARD_SABRENT_TV_PCB05, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2304, + .driver_data = SAA7134_BOARD_10MOONSTVMASTER3, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf01d, /* AVerTV DVB-T Super 007 */ + .driver_data = SAA7134_BOARD_AVERMEDIA_SUPER_007, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x4016, + .driver_data = SAA7134_BOARD_BEHOLD_401, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0000, + .subdevice = 0x4036, + .driver_data = SAA7134_BOARD_BEHOLD_403, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0000, + .subdevice = 0x4037, + .driver_data = SAA7134_BOARD_BEHOLD_403FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x4050, + .driver_data = SAA7134_BOARD_BEHOLD_405, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x4051, + .driver_data = SAA7134_BOARD_BEHOLD_405FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0000, + .subdevice = 0x4070, + .driver_data = SAA7134_BOARD_BEHOLD_407, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0000, + .subdevice = 0x4071, + .driver_data = SAA7134_BOARD_BEHOLD_407FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, + .subdevice = 0x4090, + .driver_data = SAA7134_BOARD_BEHOLD_409, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x505B, + .driver_data = SAA7134_BOARD_BEHOLD_505RDS_MK5, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x5051, + .driver_data = SAA7134_BOARD_BEHOLD_505RDS_MK3, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x5ace, + .subdevice = 0x5050, + .driver_data = SAA7134_BOARD_BEHOLD_505FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, + .subdevice = 0x5071, + .driver_data = SAA7134_BOARD_BEHOLD_507RDS_MK3, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, + .subdevice = 0x507B, + .driver_data = SAA7134_BOARD_BEHOLD_507RDS_MK5, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x5070, + .driver_data = SAA7134_BOARD_BEHOLD_507_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x5090, + .driver_data = SAA7134_BOARD_BEHOLD_507_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, + .subdevice = 0x5201, + .driver_data = SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x6070, + .driver_data = SAA7134_BOARD_BEHOLD_607FM_MK3, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x6071, + .driver_data = SAA7134_BOARD_BEHOLD_607FM_MK5, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x6072, + .driver_data = SAA7134_BOARD_BEHOLD_607RDS_MK3, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x6073, + .driver_data = SAA7134_BOARD_BEHOLD_607RDS_MK5, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6090, + .driver_data = SAA7134_BOARD_BEHOLD_609FM_MK3, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6091, + .driver_data = SAA7134_BOARD_BEHOLD_609FM_MK5, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6092, + .driver_data = SAA7134_BOARD_BEHOLD_609RDS_MK3, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6093, + .driver_data = SAA7134_BOARD_BEHOLD_609RDS_MK5, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6190, + .driver_data = SAA7134_BOARD_BEHOLD_M6, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6193, + .driver_data = SAA7134_BOARD_BEHOLD_M6_EXTRA, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6191, + .driver_data = SAA7134_BOARD_BEHOLD_M63, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x4e42, + .subdevice = 0x3502, + .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1822, /*Twinhan Technology Co. Ltd*/ + .subdevice = 0x0022, + .driver_data = SAA7134_BOARD_TWINHAN_DTV_DVB_3056, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x16be, + .subdevice = 0x0010, /* Medion version CTX953_V.1.4.3 */ + .driver_data = SAA7134_BOARD_CREATIX_CTX953, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1462, /* MSI */ + .subdevice = 0x8625, /* TV@nywhere A/D v1.1 */ + .driver_data = SAA7134_BOARD_MSI_TVANYWHERE_AD11, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf436, + .driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS_506, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf936, + .driver_data = SAA7134_BOARD_AVERMEDIA_A16D, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa836, + .driver_data = SAA7134_BOARD_AVERMEDIA_M115, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x185b, + .subdevice = 0xc900, + .driver_data = SAA7134_BOARD_VIDEOMATE_T750, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x1421, + .subdevice = 0x0380, + .driver_data = SAA7134_BOARD_ADS_INSTANT_HDTV_PCI, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5169, + .subdevice = 0x1502, + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_MINI, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6290, + .driver_data = SAA7134_BOARD_BEHOLD_H6, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf636, + .driver_data = SAA7134_BOARD_AVERMEDIA_M103, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf736, + .driver_data = SAA7134_BOARD_AVERMEDIA_M103, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4878, /* REV:1.02G */ + .driver_data = SAA7134_BOARD_ASUSTeK_TIGER_3IN1, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x48cd, + .driver_data = SAA7134_BOARD_ASUSTeK_PS3_100, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x17de, + .subdevice = 0x7128, + .driver_data = SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x17de, + .subdevice = 0xb136, + .driver_data = SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf31d, + .driver_data = SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x185b, + .subdevice = 0xc900, + .driver_data = SAA7134_BOARD_VIDEOMATE_S350, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ + .subdevice = 0x7595, + .driver_data = SAA7134_BOARD_BEHOLD_X7, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x19d1, /* RoverMedia */ + .subdevice = 0x0138, /* LifeView FlyTV Prime30 OEM */ + .driver_data = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2004, + .driver_data = SAA7134_BOARD_ZOLID_HYBRID_PCI, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1043, + .subdevice = 0x4847, + .driver_data = SAA7134_BOARD_ASUS_EUROPA_HYBRID, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x107d, + .subdevice = 0x6655, + .driver_data = SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x13c2, + .subdevice = 0x2804, + .driver_data = SAA7134_BOARD_TECHNOTREND_BUDGET_T3000, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ + .subdevice = 0x7190, + .driver_data = SAA7134_BOARD_BEHOLD_H7, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ + .subdevice = 0x7090, + .driver_data = SAA7134_BOARD_BEHOLD_A7, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7135, + .subvendor = 0x185b, + .subdevice = 0xc900, + .driver_data = SAA7134_BOARD_VIDEOMATE_M1F, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x5030, + .driver_data = SAA7134_BOARD_BEHOLD_503FM, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x5ace, + .subdevice = 0x5010, + .driver_data = SAA7134_BOARD_BEHOLD_501, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x17de, + .subdevice = 0xd136, + .driver_data = SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x6000, + .subdevice = 0x0811, + .driver_data = SAA7134_BOARD_SENSORAY811_911, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x6000, + .subdevice = 0x0911, + .driver_data = SAA7134_BOARD_SENSORAY811_911, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x2055, /* AverTV Satellite Hybrid+FM A706 */ + .driver_data = SAA7134_BOARD_AVERMEDIA_A706, + }, { + /* --- boards without eeprom + subsystem ID --- */ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0, + .driver_data = SAA7134_BOARD_NOAUTO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0, + .driver_data = SAA7134_BOARD_NOAUTO, + },{ + /* --- default catch --- */ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SAA7134_BOARD_UNKNOWN, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SAA7134_BOARD_UNKNOWN, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SAA7134_BOARD_UNKNOWN, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7135, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SAA7134_BOARD_UNKNOWN, + },{ + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, saa7134_pci_tbl); + +/* ----------------------------------------------------------- */ +/* flyvideo tweaks */ + + +static void board_flyvideo(struct saa7134_dev *dev) +{ + printk("%s: there are different flyvideo cards with different tuners\n" + "%s: out there, you might have to use the tuner= insmod\n" + "%s: option to override the default value.\n", + dev->name, dev->name, dev->name); +} + +static int saa7134_xc2028_callback(struct saa7134_dev *dev, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000); + switch (dev->board) { + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + case SAA7134_BOARD_AVERMEDIA_M103: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + saa7134_set_gpio(dev, 21, 0); + msleep(10); + saa7134_set_gpio(dev, 21, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: + saa7134_set_gpio(dev, 18, 0); + msleep(10); + saa7134_set_gpio(dev, 18, 1); + break; + case SAA7134_BOARD_VIDEOMATE_T750: + saa7134_set_gpio(dev, 20, 0); + msleep(10); + saa7134_set_gpio(dev, 20, 1); + break; + } + return 0; + } + return -EINVAL; +} + +static int saa7134_xc5000_callback(struct saa7134_dev *dev, + int command, int arg) +{ + switch (dev->board) { + case SAA7134_BOARD_BEHOLD_X7: + case SAA7134_BOARD_BEHOLD_H7: + case SAA7134_BOARD_BEHOLD_A7: + if (command == XC5000_TUNER_RESET) { + /* Down and UP pheripherial RESET pin for reset all chips */ + saa_writeb(SAA7134_SPECIAL_MODE, 0x00); + msleep(10); + saa_writeb(SAA7134_SPECIAL_MODE, 0x01); + msleep(10); + } + break; + default: + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000); + saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02); + saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81); + saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7); + saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03); + saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2, + 0x0001e000, 0x0001e000); + break; + } + return 0; +} + +static int saa7134_tda8290_827x_callback(struct saa7134_dev *dev, + int command, int arg) +{ + u8 sync_control; + + switch (command) { + case 0: /* switch LNA gain through GPIO 22*/ + saa7134_set_gpio(dev, 22, arg) ; + break; + case 1: /* vsync output at GPIO22. 50 / 60Hz */ + saa_andorb(SAA7134_VIDEO_PORT_CTRL3, 0x80, 0x80); + saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x03); + if (arg == 1) + sync_control = 11; + else + sync_control = 17; + saa_writeb(SAA7134_VGATE_START, sync_control); + saa_writeb(SAA7134_VGATE_STOP, sync_control + 1); + saa_andorb(SAA7134_MISC_VGATE_MSB, 0x03, 0x00); + break; + default: + return -EINVAL; + } + + return 0; +} + +static inline int saa7134_tda18271_hvr11x0_toggle_agc(struct saa7134_dev *dev, + enum tda18271_mode mode) +{ + /* toggle AGC switch through GPIO 26 */ + switch (mode) { + case TDA18271_ANALOG: + saa7134_set_gpio(dev, 26, 0); + break; + case TDA18271_DIGITAL: + saa7134_set_gpio(dev, 26, 1); + break; + default: + return -EINVAL; + } + return 0; +} + +static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev, + enum tda18271_mode mode) +{ + /* toggle AGC switch through GPIO 27 */ + switch (mode) { + case TDA18271_ANALOG: + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000); + msleep(20); + break; + case TDA18271_DIGITAL: + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); + msleep(20); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000); + msleep(30); + break; + default: + return -EINVAL; + } + return 0; +} + +static int saa7134_kworld_pc150u_toggle_agc(struct saa7134_dev *dev, + enum tda18271_mode mode) +{ + switch (mode) { + case TDA18271_ANALOG: + saa7134_set_gpio(dev, 18, 0); + break; + case TDA18271_DIGITAL: + saa7134_set_gpio(dev, 18, 1); + msleep(30); + break; + default: + return -EINVAL; + } + return 0; +} + +static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev, + int command, int arg) +{ + int ret = 0; + + switch (command) { + case TDA18271_CALLBACK_CMD_AGC_ENABLE: /* 0 */ + switch (dev->board) { + case SAA7134_BOARD_HAUPPAUGE_HVR1150: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: + case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: + ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg); + break; + case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: + ret = saa7134_kworld_sbtvd_toggle_agc(dev, arg); + break; + case SAA7134_BOARD_KWORLD_PC150U: + ret = saa7134_kworld_pc150u_toggle_agc(dev, arg); + break; + default: + break; + } + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int saa7134_tda8290_callback(struct saa7134_dev *dev, + int command, int arg) +{ + int ret; + + switch (dev->board) { + case SAA7134_BOARD_HAUPPAUGE_HVR1150: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: + case SAA7134_BOARD_AVERMEDIA_M733A: + case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: + case SAA7134_BOARD_KWORLD_PC150U: + case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: + /* tda8290 + tda18271 */ + ret = saa7134_tda8290_18271_callback(dev, command, arg); + break; + default: + /* tda8290 + tda827x */ + ret = saa7134_tda8290_827x_callback(dev, command, arg); + break; + } + return ret; +} + +int saa7134_tuner_callback(void *priv, int component, int command, int arg) +{ + struct saa7134_dev *dev = priv; + + if (dev != NULL) { + switch (dev->tuner_type) { + case TUNER_PHILIPS_TDA8290: + return saa7134_tda8290_callback(dev, command, arg); + case TUNER_XC2028: + return saa7134_xc2028_callback(dev, command, arg); + case TUNER_XC5000: + return saa7134_xc5000_callback(dev, command, arg); + } + } else { + printk(KERN_ERR "saa7134: Error - device struct undefined.\n"); + return -EINVAL; + } + return -EINVAL; +} +EXPORT_SYMBOL(saa7134_tuner_callback); + +/* ----------------------------------------------------------- */ + +static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data) +{ + struct tveeprom tv; + + tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data); + + /* Make sure we support the board model */ + switch (tv.model) { + case 67019: /* WinTV-HVR1110 (Retail, IR Blaster, hybrid, FM, SVid/Comp, 3.5mm audio in) */ + case 67109: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */ + case 67201: /* WinTV-HVR1150 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */ + case 67301: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */ + case 67209: /* WinTV-HVR1110 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */ + case 67559: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */ + case 67569: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM) */ + case 67579: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM) */ + case 67589: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */ + case 67599: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */ + case 67651: /* WinTV-HVR1150 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */ + case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */ + break; + default: + printk(KERN_WARNING "%s: warning: " + "unknown hauppauge model #%d\n", dev->name, tv.model); + break; + } + + printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n", + dev->name, tv.model); +} + +/* ----------------------------------------------------------- */ + +int saa7134_board_init1(struct saa7134_dev *dev) +{ + /* Always print gpio, often manufacturers encode tuner type and other info. */ + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0); + dev->gpio_value = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + printk(KERN_INFO "%s: board init: gpio is %x\n", dev->name, dev->gpio_value); + + switch (dev->board) { + case SAA7134_BOARD_FLYVIDEO2000: + case SAA7134_BOARD_FLYVIDEO3000: + case SAA7134_BOARD_FLYVIDEO3000_NTSC: + dev->has_remote = SAA7134_REMOTE_GPIO; + board_flyvideo(dev); + break; + case SAA7134_BOARD_FLYTVPLATINUM_MINI2: + case SAA7134_BOARD_FLYTVPLATINUM_FM: + case SAA7134_BOARD_CINERGY400: + case SAA7134_BOARD_CINERGY600: + case SAA7134_BOARD_CINERGY600_MK3: + case SAA7134_BOARD_ECS_TVP3XP: + case SAA7134_BOARD_ECS_TVP3XP_4CB5: + case SAA7134_BOARD_ECS_TVP3XP_4CB6: + case SAA7134_BOARD_MD2819: + case SAA7134_BOARD_KWORLD_VSTREAM_XPERT: + case SAA7134_BOARD_KWORLD_XPERT: + case SAA7134_BOARD_AVERMEDIA_STUDIO_305: + case SAA7134_BOARD_AVERMEDIA_STUDIO_505: + case SAA7134_BOARD_AVERMEDIA_305: + case SAA7134_BOARD_AVERMEDIA_STUDIO_307: + case SAA7134_BOARD_AVERMEDIA_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507: + case SAA7134_BOARD_AVERMEDIA_GO_007_FM: + case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_M135A: +/* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */ + case SAA7134_BOARD_VIDEOMATE_TV_PVR: + case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: + case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII: + case SAA7134_BOARD_VIDEOMATE_M1F: + case SAA7134_BOARD_VIDEOMATE_DVBT_300: + case SAA7134_BOARD_VIDEOMATE_DVBT_200: + case SAA7134_BOARD_VIDEOMATE_DVBT_200A: + case SAA7134_BOARD_MANLI_MTV001: + case SAA7134_BOARD_MANLI_MTV002: + case SAA7134_BOARD_BEHOLD_409FM: + case SAA7134_BOARD_AVACSSMARTTV: + case SAA7134_BOARD_GOTVIEW_7135: + case SAA7134_BOARD_KWORLD_TERMINATOR: + case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS: + case SAA7134_BOARD_FLYDVBT_LR301: + case SAA7134_BOARD_ASUSTeK_PS3_100: + case SAA7134_BOARD_ASUSTeK_P7131_DUAL: + case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: + case SAA7134_BOARD_ASUSTeK_P7131_ANALOG: + case SAA7134_BOARD_FLYDVBTDUO: + case SAA7134_BOARD_PROTEUS_2309: + case SAA7134_BOARD_AVERMEDIA_A16AR: + case SAA7134_BOARD_ENCORE_ENLTV: + case SAA7134_BOARD_ENCORE_ENLTV_FM: + case SAA7134_BOARD_ENCORE_ENLTV_FM53: + case SAA7134_BOARD_ENCORE_ENLTV_FM3: + case SAA7134_BOARD_10MOONSTVMASTER3: + case SAA7134_BOARD_BEHOLD_401: + case SAA7134_BOARD_BEHOLD_403: + case SAA7134_BOARD_BEHOLD_403FM: + case SAA7134_BOARD_BEHOLD_405: + case SAA7134_BOARD_BEHOLD_405FM: + case SAA7134_BOARD_BEHOLD_407: + case SAA7134_BOARD_BEHOLD_407FM: + case SAA7134_BOARD_BEHOLD_409: + case SAA7134_BOARD_BEHOLD_505FM: + case SAA7134_BOARD_BEHOLD_505RDS_MK5: + case SAA7134_BOARD_BEHOLD_505RDS_MK3: + case SAA7134_BOARD_BEHOLD_507_9FM: + case SAA7134_BOARD_BEHOLD_507RDS_MK3: + case SAA7134_BOARD_BEHOLD_507RDS_MK5: + case SAA7134_BOARD_GENIUS_TVGO_A11MCE: + case SAA7134_BOARD_REAL_ANGEL_220: + case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: + case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS: + case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM: + case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S: + dev->has_remote = SAA7134_REMOTE_GPIO; + break; + case SAA7134_BOARD_FLYDVBS_LR300: + saa_writeb(SAA7134_GPIO_GPMODE3, 0x80); + saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x40); + dev->has_remote = SAA7134_REMOTE_GPIO; + break; + case SAA7134_BOARD_MD5044: + printk("%s: seems there are two different versions of the MD5044\n" + "%s: (with the same ID) out there. If sound doesn't work for\n" + "%s: you try the audio_clock_override=0x200000 insmod option.\n", + dev->name,dev->name,dev->name); + break; + case SAA7134_BOARD_CINERGY400_CARDBUS: + /* power-up tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000); + break; + case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: + /* this turns the remote control chip off to work around a bug in it */ + saa_writeb(SAA7134_GPIO_GPMODE1, 0x80); + saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80); + break; + case SAA7134_BOARD_MONSTERTV_MOBILE: + /* power-up tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000004); + break; + case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: + /* turn the fan on */ + saa_writeb(SAA7134_GPIO_GPMODE3, 0x08); + saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x06); + break; + case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: + case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08000000, 0x08000000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000); + break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS: + case SAA7134_BOARD_AVERMEDIA_M115: + /* power-down tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0); + msleep(10); + /* power-up tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff); + msleep(10); + break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_501: + /* power-down tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08400000, 0x08400000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08400000, 0); + msleep(10); + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08400000, 0x08400000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08400000, 0x08400000); + msleep(10); + dev->has_remote = SAA7134_REMOTE_I2C; + break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + dev->has_remote = SAA7134_REMOTE_I2C; + break; + case SAA7134_BOARD_AVERMEDIA_M103: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + saa7134_set_gpio(dev, 21, 0); + msleep(10); + saa7134_set_gpio(dev, 21, 1); + msleep(1); + dev->has_remote = SAA7134_REMOTE_GPIO; + break; + case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: + /* power-down tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x000A8004, 0); + msleep(10); + /* power-up tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x000A8004, 0x000A8004); + msleep(10); + /* remote via GPIO */ + dev->has_remote = SAA7134_REMOTE_GPIO; + break; + case SAA7134_BOARD_RTD_VFG7350: + + /* + * Make sure Production Test Register at offset 0x1D1 is cleared + * to take chip out of test mode. Clearing bit 4 (TST_EN_AOUT) + * prevents pin 105 from remaining low; keeping pin 105 low + * continually resets the SAA6752 chip. + */ + + saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00); + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1150: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: + dev->has_remote = SAA7134_REMOTE_GPIO; + /* GPIO 26 high for digital, low for analog */ + saa7134_set_gpio(dev, 26, 0); + msleep(1); + + saa7134_set_gpio(dev, 22, 0); + msleep(10); + saa7134_set_gpio(dev, 22, 1); + break; + /* i2c remotes */ + case SAA7134_BOARD_PINNACLE_PCTV_110i: + case SAA7134_BOARD_PINNACLE_PCTV_310i: + case SAA7134_BOARD_UPMOST_PURPLE_TV: + case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: + case SAA7134_BOARD_HAUPPAUGE_HVR1110: + case SAA7134_BOARD_BEHOLD_607FM_MK3: + case SAA7134_BOARD_BEHOLD_607FM_MK5: + case SAA7134_BOARD_BEHOLD_609FM_MK3: + case SAA7134_BOARD_BEHOLD_609FM_MK5: + case SAA7134_BOARD_BEHOLD_607RDS_MK3: + case SAA7134_BOARD_BEHOLD_607RDS_MK5: + case SAA7134_BOARD_BEHOLD_609RDS_MK3: + case SAA7134_BOARD_BEHOLD_609RDS_MK5: + case SAA7134_BOARD_BEHOLD_M6: + case SAA7134_BOARD_BEHOLD_M63: + case SAA7134_BOARD_BEHOLD_M6_EXTRA: + case SAA7134_BOARD_BEHOLD_H6: + case SAA7134_BOARD_BEHOLD_X7: + case SAA7134_BOARD_BEHOLD_H7: + case SAA7134_BOARD_BEHOLD_A7: + case SAA7134_BOARD_KWORLD_PC150U: + dev->has_remote = SAA7134_REMOTE_I2C; + break; + case SAA7134_BOARD_AVERMEDIA_A169_B: + printk("%s: %s: dual saa713x broadcast decoders\n" + "%s: Sorry, none of the inputs to this chip are supported yet.\n" + "%s: Dual decoder functionality is disabled for now, use the other chip.\n", + dev->name,card(dev).name,dev->name,dev->name); + break; + case SAA7134_BOARD_AVERMEDIA_M102: + /* enable tuner */ + dev->has_remote = SAA7134_REMOTE_GPIO; + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x8c040007, 0x8c040007); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0c0007cd, 0x0c0007cd); + break; + case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: + case SAA7134_BOARD_AVERMEDIA_A700_PRO: + /* write windows gpio values */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100); + break; + case SAA7134_BOARD_AVERMEDIA_A706: + /* radio antenna select: tristate both as in Windows driver */ + saa7134_set_gpio(dev, 12, 3); /* TV antenna */ + saa7134_set_gpio(dev, 13, 3); /* FM antenna */ + dev->has_remote = SAA7134_REMOTE_I2C; + /* + * Disable CE5039 DVB-S tuner now (SLEEP pin high) to prevent + * it from interfering with analog tuner detection + */ + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_VIDEOMATE_S350: + dev->has_remote = SAA7134_REMOTE_GPIO; + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x0000C000, 0x0000C000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000C000, 0x0000C000); + break; + case SAA7134_BOARD_AVERMEDIA_M733A: + saa7134_set_gpio(dev, 1, 1); + msleep(10); + saa7134_set_gpio(dev, 1, 0); + msleep(10); + saa7134_set_gpio(dev, 1, 1); + dev->has_remote = SAA7134_REMOTE_GPIO; + break; + case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: + /* enable LGS-8G75 */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x0e050000, 0x0c050000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0e050000, 0x0c050000); + break; + case SAA7134_BOARD_VIDEOMATE_T750: + /* enable the analog tuner */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00008000, 0x00008000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000); + break; + } + return 0; +} + +static void saa7134_tuner_setup(struct saa7134_dev *dev) +{ + struct tuner_setup tun_setup; + unsigned int mode_mask = T_RADIO | T_ANALOG_TV; + + memset(&tun_setup, 0, sizeof(tun_setup)); + tun_setup.tuner_callback = saa7134_tuner_callback; + + if (saa7134_boards[dev->board].radio_type != UNSET) { + tun_setup.type = saa7134_boards[dev->board].radio_type; + tun_setup.addr = saa7134_boards[dev->board].radio_addr; + + tun_setup.mode_mask = T_RADIO; + + saa_call_all(dev, tuner, s_type_addr, &tun_setup); + mode_mask &= ~T_RADIO; + } + + if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type != UNSET)) { + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; + tun_setup.config = &saa7134_boards[dev->board].tda829x_conf; + tun_setup.tuner_callback = saa7134_tuner_callback; + + tun_setup.mode_mask = mode_mask; + + saa_call_all(dev, tuner, s_type_addr, &tun_setup); + } + + if (dev->tda9887_conf) { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &dev->tda9887_conf; + + saa_call_all(dev, tuner, s_config, &tda9887_cfg); + } + + if (dev->tuner_type == TUNER_XC2028) { + struct v4l2_priv_tun_config xc2028_cfg; + struct xc2028_ctrl ctl; + + memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); + memset(&ctl, 0, sizeof(ctl)); + + ctl.fname = XC2028_DEFAULT_FIRMWARE; + ctl.max_len = 64; + + switch (dev->board) { + case SAA7134_BOARD_AVERMEDIA_A16D: + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + case SAA7134_BOARD_AVERMEDIA_M103: + case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: + ctl.demod = XC3028_FE_ZARLINK456; + break; + default: + ctl.demod = XC3028_FE_OREN538; + ctl.mts = 1; + } + + xc2028_cfg.tuner = TUNER_XC2028; + xc2028_cfg.priv = &ctl; + + saa_call_all(dev, tuner, s_config, &xc2028_cfg); + } +} + +/* stuff which needs working i2c */ +int saa7134_board_init2(struct saa7134_dev *dev) +{ + unsigned char buf; + int board; + + /* Put here the code that enables the chips that are needed + for analog mode and doesn't depend on the tuner attachment. + It is also a good idea to get tuner type from eeprom, etc before + initializing tuner, since we can avoid loading tuner driver + on devices that has TUNER_ABSENT + */ + switch (dev->board) { + case SAA7134_BOARD_BMK_MPEX_NOTUNER: + case SAA7134_BOARD_BMK_MPEX_TUNER: + /* Checks if the device has a tuner at 0x60 addr + If the device doesn't have a tuner, TUNER_ABSENT + will be used at tuner_type, avoiding loading tuner + without needing it + */ + dev->i2c_client.addr = 0x60; + board = (i2c_master_recv(&dev->i2c_client, &buf, 0) < 0) + ? SAA7134_BOARD_BMK_MPEX_NOTUNER + : SAA7134_BOARD_BMK_MPEX_TUNER; + if (board == dev->board) + break; + dev->board = board; + printk("%s: board type fixup: %s\n", dev->name, + saa7134_boards[dev->board].name); + dev->tuner_type = saa7134_boards[dev->board].tuner_type; + + break; + case SAA7134_BOARD_MD7134: + { + u8 subaddr; + u8 data[3]; + int ret, tuner_t; + struct i2c_msg msg[] = {{.addr=0x50, .flags=0, .buf=&subaddr, .len = 1}, + {.addr=0x50, .flags=I2C_M_RD, .buf=data, .len = 3}}; + + subaddr= 0x14; + tuner_t = 0; + + /* Retrieve device data from eeprom, checking for the + proper tuner_type. + */ + ret = i2c_transfer(&dev->i2c_adap, msg, 2); + if (ret != 2) { + printk(KERN_ERR "EEPROM read failure\n"); + } else if ((data[0] != 0) && (data[0] != 0xff)) { + /* old config structure */ + subaddr = data[0] + 2; + msg[1].len = 2; + i2c_transfer(&dev->i2c_adap, msg, 2); + tuner_t = (data[0] << 8) + data[1]; + switch (tuner_t){ + case 0x0103: + dev->tuner_type = TUNER_PHILIPS_PAL; + break; + case 0x010C: + dev->tuner_type = TUNER_PHILIPS_FM1216ME_MK3; + break; + default: + printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t); + } + } else if ((data[1] != 0) && (data[1] != 0xff)) { + /* new config structure */ + subaddr = data[1] + 1; + msg[1].len = 1; + i2c_transfer(&dev->i2c_adap, msg, 2); + subaddr = data[0] + 1; + msg[1].len = 2; + i2c_transfer(&dev->i2c_adap, msg, 2); + tuner_t = (data[1] << 8) + data[0]; + switch (tuner_t) { + case 0x0005: + dev->tuner_type = TUNER_PHILIPS_FM1216ME_MK3; + break; + case 0x001d: + dev->tuner_type = TUNER_PHILIPS_FMD1216ME_MK3; + printk(KERN_INFO "%s Board has DVB-T\n", dev->name); + break; + default: + printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t); + } + } else { + printk(KERN_ERR "%s unexpected config structure\n", dev->name); + } + + printk(KERN_INFO "%s Tuner type is %d\n", dev->name, dev->tuner_type); + break; + } + case SAA7134_BOARD_PHILIPS_EUROPA: + if (dev->autodetected && (dev->eedata[0x41] == 0x1c)) { + /* Reconfigure board as Snake reference design */ + dev->board = SAA7134_BOARD_PHILIPS_SNAKE; + dev->tuner_type = saa7134_boards[dev->board].tuner_type; + printk(KERN_INFO "%s: Reconfigured board as %s\n", + dev->name, saa7134_boards[dev->board].name); + break; + } + /* break intentionally omitted */ + case SAA7134_BOARD_VIDEOMATE_DVBT_300: + case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: + case SAA7134_BOARD_ASUS_EUROPA_HYBRID: + case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000: + { + + /* The Philips EUROPA based hybrid boards have the tuner + connected through the channel decoder. We have to make it + transparent to find it + */ + u8 data[] = { 0x07, 0x02}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + + break; + } + case SAA7134_BOARD_PHILIPS_TIGER: + case SAA7134_BOARD_PHILIPS_TIGER_S: + { + u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + if (dev->autodetected && (dev->eedata[0x49] == 0x50)) { + dev->board = SAA7134_BOARD_PHILIPS_TIGER_S; + printk(KERN_INFO "%s: Reconfigured board as %s\n", + dev->name, saa7134_boards[dev->board].name); + } + if (dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) { + dev->tuner_type = TUNER_PHILIPS_TDA8290; + + data[2] = 0x68; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } + case SAA7134_BOARD_ASUSTeK_TVFM7135: + /* The card below is detected as card=53, but is different */ + if (dev->autodetected && (dev->eedata[0x27] == 0x03)) { + dev->board = SAA7134_BOARD_ASUSTeK_P7131_ANALOG; + printk(KERN_INFO "%s: P7131 analog only, using " + "entry of %s\n", + dev->name, saa7134_boards[dev->board].name); + + /* IR init has already happened for other cards, so + * we have to catch up. */ + dev->has_remote = SAA7134_REMOTE_GPIO; + saa7134_input_init1(dev); + } + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1150: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: + hauppauge_eeprom(dev, dev->eedata+0x80); + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1110: + hauppauge_eeprom(dev, dev->eedata+0x80); + /* break intentionally omitted */ + case SAA7134_BOARD_PINNACLE_PCTV_310i: + case SAA7134_BOARD_KWORLD_DVBT_210: + case SAA7134_BOARD_TEVION_DVBT_220RF: + case SAA7134_BOARD_ASUSTeK_TIGER: + case SAA7134_BOARD_ASUSTeK_P7131_DUAL: + case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: + case SAA7134_BOARD_MEDION_MD8800_QUADRO: + case SAA7134_BOARD_AVERMEDIA_SUPER_007: + case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: + case SAA7134_BOARD_CREATIX_CTX953: + { + /* this is a hybrid board, initialize to analog mode + * and configure firmware eeprom address + */ + u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } + case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: + { + u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr = 0x0b, .flags = 0, .buf = data, + .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } + case SAA7134_BOARD_ASUSTeK_PS3_100: + { + u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr = 0x0b, .flags = 0, .buf = data, + .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } + case SAA7134_BOARD_FLYDVB_TRIO: + { + u8 temp = 0; + int rc; + u8 data[] = { 0x3c, 0x33, 0x62}; + struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + + /* + * send weak up message to pic16C505 chip + * @ LifeView FlyDVB Trio + */ + msg.buf = &temp; + msg.addr = 0x0b; + msg.len = 1; + if (1 != i2c_transfer(&dev->i2c_adap, &msg, 1)) { + printk(KERN_WARNING "%s: send wake up byte to pic16C505" + "(IR chip) failed\n", dev->name); + } else { + msg.flags = I2C_M_RD; + rc = i2c_transfer(&dev->i2c_adap, &msg, 1); + printk(KERN_INFO "%s: probe IR chip @ i2c 0x%02x: %s\n", + dev->name, msg.addr, + (1 == rc) ? "yes" : "no"); + if (rc == 1) + dev->has_remote = SAA7134_REMOTE_I2C; + } + break; + } + case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: + case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: + { + /* initialize analog mode */ + u8 data[] = { 0x3c, 0x33, 0x6a}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } + case SAA7134_BOARD_CINERGY_HT_PCMCIA: + case SAA7134_BOARD_CINERGY_HT_PCI: + { + /* initialize analog mode */ + u8 data[] = { 0x3c, 0x33, 0x68}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } + case SAA7134_BOARD_VIDEOMATE_DVBT_200: + case SAA7134_BOARD_VIDEOMATE_DVBT_200A: + /* The T200 and the T200A share the same pci id. Consequently, + * we are going to query eeprom to try to find out which one we + * are actually looking at. */ + + /* Don't do this if the board was specifically selected with an + * insmod option or if we have the default configuration T200*/ + if (!dev->autodetected || (dev->eedata[0x41] == 0xd0)) + break; + if (dev->eedata[0x41] == 0x02) { + /* Reconfigure board as T200A */ + dev->board = SAA7134_BOARD_VIDEOMATE_DVBT_200A; + dev->tuner_type = saa7134_boards[dev->board].tuner_type; + dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf; + printk(KERN_INFO "%s: Reconfigured board as %s\n", + dev->name, saa7134_boards[dev->board].name); + } else { + printk(KERN_WARNING "%s: Unexpected tuner type info: %x in eeprom\n", + dev->name, dev->eedata[0x41]); + break; + } + break; + case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: + case SAA7134_BOARD_KWORLD_ATSC110: + { + struct i2c_msg msg = { .addr = 0x0a, .flags = 0 }; + int i; + static u8 buffer[][2] = { + { 0x10, 0x12 }, + { 0x13, 0x04 }, + { 0x16, 0x00 }, + { 0x14, 0x04 }, + { 0x17, 0x00 }, + }; + + for (i = 0; i < ARRAY_SIZE(buffer); i++) { + msg.buf = &buffer[i][0]; + msg.len = ARRAY_SIZE(buffer[0]); + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) + printk(KERN_WARNING + "%s: Unable to enable tuner(%i).\n", + dev->name, i); + } + break; + } + case SAA7134_BOARD_BEHOLD_H6: + { + u8 data[] = { 0x09, 0x9f, 0x86, 0x11}; + struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = data, + .len = sizeof(data)}; + + /* The tuner TUNER_PHILIPS_FMD1216MEX_MK3 after hardware */ + /* start has disabled IF and enabled DVB-T. When saa7134 */ + /* scan I2C devices it not detect IF tda9887 and can`t */ + /* watch TV without software reboot. For solve this problem */ + /* switch the tuner to analog TV mode manually. */ + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) + printk(KERN_WARNING + "%s: Unable to enable IF of the tuner.\n", + dev->name); + break; + } + case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000); + + saa7134_set_gpio(dev, 27, 0); + break; + } /* switch() */ + + /* initialize tuner (don't do this when resuming) */ + if (!dev->insuspend && TUNER_ABSENT != dev->tuner_type) { + int has_demod = (dev->tda9887_conf & TDA9887_PRESENT); + + /* Note: radio tuner address is always filled in, + so we do not need to probe for a radio tuner device. */ + if (dev->radio_type != UNSET) + v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "tuner", + dev->radio_addr, NULL); + if (has_demod) + v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + if (dev->tuner_addr == ADDR_UNSET) { + enum v4l2_i2c_tuner_type type = + has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; + + v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(type)); + } else { + v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "tuner", + dev->tuner_addr, NULL); + } + } + + saa7134_tuner_setup(dev); + + switch (dev->board) { + case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: + case SAA7134_BOARD_AVERMEDIA_CARDBUS_501: + { + struct v4l2_priv_tun_config tea5767_cfg; + struct tea5767_ctrl ctl; + + dev->i2c_client.addr = 0xC0; + /* set TEA5767(analog FM) defines */ + memset(&ctl, 0, sizeof(ctl)); + ctl.xtal_freq = TEA5767_HIGH_LO_13MHz; + tea5767_cfg.tuner = TUNER_TEA5767; + tea5767_cfg.priv = &ctl; + saa_call_all(dev, tuner, s_config, &tea5767_cfg); + break; + } + } /* switch() */ + + return 0; +} diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c new file mode 100644 index 00000000..45f0aca5 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-core.c @@ -0,0 +1,1366 @@ +/* + * + * device driver for philips saa7134 based TV cards + * driver core + * + * (c) 2001-03 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" + +MODULE_DESCRIPTION("v4l2 driver module for saa7130/34 based TV cards"); +MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(SAA7134_VERSION); + + +/* ------------------------------------------------------------------ */ + +static unsigned int irq_debug; +module_param(irq_debug, int, 0644); +MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]"); + +static unsigned int core_debug; +module_param(core_debug, int, 0644); +MODULE_PARM_DESC(core_debug,"enable debug messages [core]"); + +static unsigned int gpio_tracking; +module_param(gpio_tracking, int, 0644); +MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]"); + +static unsigned int alsa = 1; +module_param(alsa, int, 0644); +MODULE_PARM_DESC(alsa,"enable/disable ALSA DMA sound [dmasound]"); + +static unsigned int latency = UNSET; +module_param(latency, int, 0444); +MODULE_PARM_DESC(latency,"pci latency timer"); + +int saa7134_no_overlay=-1; +module_param_named(no_overlay, saa7134_no_overlay, int, 0444); +MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" + " [some VIA/SIS chipsets are known to have problem with overlay]"); + +static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; +static unsigned int vbi_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; +static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; +static unsigned int tuner[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; +static unsigned int card[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; + + +module_param_array(video_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); +module_param_array(radio_nr, int, NULL, 0444); +module_param_array(tuner, int, NULL, 0444); +module_param_array(card, int, NULL, 0444); + +MODULE_PARM_DESC(video_nr, "video device number"); +MODULE_PARM_DESC(vbi_nr, "vbi device number"); +MODULE_PARM_DESC(radio_nr, "radio device number"); +MODULE_PARM_DESC(tuner, "tuner type"); +MODULE_PARM_DESC(card, "card type"); + +DEFINE_MUTEX(saa7134_devlist_lock); +EXPORT_SYMBOL(saa7134_devlist_lock); +LIST_HEAD(saa7134_devlist); +EXPORT_SYMBOL(saa7134_devlist); +static LIST_HEAD(mops_list); +static unsigned int saa7134_devcount; + +int (*saa7134_dmasound_init)(struct saa7134_dev *dev); +int (*saa7134_dmasound_exit)(struct saa7134_dev *dev); + +#define dprintk(fmt, arg...) if (core_debug) \ + printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg) + +void saa7134_track_gpio(struct saa7134_dev *dev, char *msg) +{ + unsigned long mode,status; + + if (!gpio_tracking) + return; + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,0); + saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,SAA7134_GPIO_GPRESCAN); + mode = saa_readl(SAA7134_GPIO_GPMODE0 >> 2) & 0xfffffff; + status = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & 0xfffffff; + printk(KERN_DEBUG + "%s: gpio: mode=0x%07lx in=0x%07lx out=0x%07lx [%s]\n", + dev->name, mode, (~mode) & status, mode & status, msg); +} + +void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value) +{ + u32 index, bitval; + + index = 1 << bit_no; + switch (value) { + case 0: /* static value */ + case 1: dprintk("setting GPIO%d to static %d\n", bit_no, value); + /* turn sync mode off if necessary */ + if (index & 0x00c00000) + saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x00); + if (value) + bitval = index; + else + bitval = 0; + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, index); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, index, bitval); + break; + case 3: /* tristate */ + dprintk("setting GPIO%d to tristate\n", bit_no); + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, 0); + break; + } +} + +/* ------------------------------------------------------------------ */ + + +/* ----------------------------------------------------------- */ +/* delayed request_module */ + +#if defined(CONFIG_MODULES) && defined(MODULE) + +static void request_module_async(struct work_struct *work){ + struct saa7134_dev* dev = container_of(work, struct saa7134_dev, request_module_wk); + if (card_is_empress(dev)) + request_module("saa7134-empress"); + if (card_is_dvb(dev)) + request_module("saa7134-dvb"); + if (alsa) { + if (dev->pci->device != PCI_DEVICE_ID_PHILIPS_SAA7130) + request_module("saa7134-alsa"); + } +} + +static void request_submodules(struct saa7134_dev *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_submodules(struct saa7134_dev *dev) +{ + flush_work(&dev->request_module_wk); +} + +#else +#define request_submodules(dev) +#define flush_request_submodules(dev) +#endif /* CONFIG_MODULES */ + +/* ------------------------------------------------------------------ */ + +/* nr of (saa7134-)pages for the given buffer size */ +static int saa7134_buffer_pages(int size) +{ + size = PAGE_ALIGN(size); + size += PAGE_SIZE; /* for non-page-aligned buffers */ + size /= 4096; + return size; +} + +/* calc max # of buffers from size (must not exceed the 4MB virtual + * address space per DMA channel) */ +int saa7134_buffer_count(unsigned int size, unsigned int count) +{ + unsigned int maxcount; + + maxcount = 1024 / saa7134_buffer_pages(size); + if (count > maxcount) + count = maxcount; + return count; +} + +int saa7134_buffer_startpage(struct saa7134_buf *buf) +{ + return saa7134_buffer_pages(buf->vb.bsize) * buf->vb.i; +} + +unsigned long saa7134_buffer_base(struct saa7134_buf *buf) +{ + unsigned long base; + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + base = saa7134_buffer_startpage(buf) * 4096; + base += dma->sglist[0].offset; + return base; +} + +/* ------------------------------------------------------------------ */ + +int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt) +{ + __le32 *cpu; + dma_addr_t dma_addr = 0; + + cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr); + if (NULL == cpu) + return -ENOMEM; + pt->size = SAA7134_PGTABLE_SIZE; + pt->cpu = cpu; + pt->dma = dma_addr; + return 0; +} + +int saa7134_pgtable_build(struct pci_dev *pci, struct saa7134_pgtable *pt, + struct scatterlist *list, unsigned int length, + unsigned int startpage) +{ + __le32 *ptr; + unsigned int i,p; + + BUG_ON(NULL == pt || NULL == pt->cpu); + + ptr = pt->cpu + startpage; + for (i = 0; i < length; i++, list++) + for (p = 0; p * 4096 < list->length; p++, ptr++) + *ptr = cpu_to_le32(sg_dma_address(list) - list->offset); + return 0; +} + +void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt) +{ + if (NULL == pt->cpu) + return; + pci_free_consistent(pci, pt->size, pt->cpu, pt->dma); + pt->cpu = NULL; +} + +/* ------------------------------------------------------------------ */ + +void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf) +{ + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + BUG_ON(in_interrupt()); + + videobuf_waiton(q, &buf->vb, 0, 0); + videobuf_dma_unmap(q->dev, dma); + videobuf_dma_free(dma); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +/* ------------------------------------------------------------------ */ + +int saa7134_buffer_queue(struct saa7134_dev *dev, + struct saa7134_dmaqueue *q, + struct saa7134_buf *buf) +{ + struct saa7134_buf *next = NULL; + + assert_spin_locked(&dev->slock); + dprintk("buffer_queue %p\n",buf); + if (NULL == q->curr) { + if (!q->need_two) { + q->curr = buf; + buf->activate(dev,buf,NULL); + } else if (list_empty(&q->queue)) { + list_add_tail(&buf->vb.queue,&q->queue); + buf->vb.state = VIDEOBUF_QUEUED; + } else { + next = list_entry(q->queue.next,struct saa7134_buf, + vb.queue); + q->curr = buf; + buf->activate(dev,buf,next); + } + } else { + list_add_tail(&buf->vb.queue,&q->queue); + buf->vb.state = VIDEOBUF_QUEUED; + } + return 0; +} + +void saa7134_buffer_finish(struct saa7134_dev *dev, + struct saa7134_dmaqueue *q, + unsigned int state) +{ + assert_spin_locked(&dev->slock); + dprintk("buffer_finish %p\n",q->curr); + + /* finish current buffer */ + q->curr->vb.state = state; + v4l2_get_timestamp(&q->curr->vb.ts); + wake_up(&q->curr->vb.done); + q->curr = NULL; +} + +void saa7134_buffer_next(struct saa7134_dev *dev, + struct saa7134_dmaqueue *q) +{ + struct saa7134_buf *buf,*next = NULL; + + assert_spin_locked(&dev->slock); + BUG_ON(NULL != q->curr); + + if (!list_empty(&q->queue)) { + /* activate next one from queue */ + buf = list_entry(q->queue.next,struct saa7134_buf,vb.queue); + dprintk("buffer_next %p [prev=%p/next=%p]\n", + buf,q->queue.prev,q->queue.next); + list_del(&buf->vb.queue); + if (!list_empty(&q->queue)) + next = list_entry(q->queue.next,struct saa7134_buf, + vb.queue); + q->curr = buf; + buf->activate(dev,buf,next); + dprintk("buffer_next #2 prev=%p/next=%p\n", + q->queue.prev,q->queue.next); + } else { + /* nothing to do -- just stop DMA */ + dprintk("buffer_next %p\n",NULL); + saa7134_set_dmabits(dev); + del_timer(&q->timeout); + + if (card_has_mpeg(dev)) + if (dev->ts_started) + saa7134_ts_stop(dev); + } +} + +void saa7134_buffer_timeout(unsigned long data) +{ + struct saa7134_dmaqueue *q = (struct saa7134_dmaqueue*)data; + struct saa7134_dev *dev = q->dev; + unsigned long flags; + + spin_lock_irqsave(&dev->slock,flags); + + /* try to reset the hardware (SWRST) */ + saa_writeb(SAA7134_REGION_ENABLE, 0x00); + saa_writeb(SAA7134_REGION_ENABLE, 0x80); + saa_writeb(SAA7134_REGION_ENABLE, 0x00); + + /* flag current buffer as failed, + try to start over with the next one. */ + if (q->curr) { + dprintk("timeout on %p\n",q->curr); + saa7134_buffer_finish(dev,q,VIDEOBUF_ERROR); + } + saa7134_buffer_next(dev,q); + spin_unlock_irqrestore(&dev->slock,flags); +} + +/* ------------------------------------------------------------------ */ + +int saa7134_set_dmabits(struct saa7134_dev *dev) +{ + u32 split, task=0, ctrl=0, irq=0; + enum v4l2_field cap = V4L2_FIELD_ANY; + enum v4l2_field ov = V4L2_FIELD_ANY; + + assert_spin_locked(&dev->slock); + + if (dev->insuspend) + return 0; + + /* video capture -- dma 0 + video task A */ + if (dev->video_q.curr) { + task |= 0x01; + ctrl |= SAA7134_MAIN_CTRL_TE0; + irq |= SAA7134_IRQ1_INTE_RA0_1 | + SAA7134_IRQ1_INTE_RA0_0; + cap = dev->video_q.curr->vb.field; + } + + /* video capture -- dma 1+2 (planar modes) */ + if (dev->video_q.curr && + dev->video_q.curr->fmt->planar) { + ctrl |= SAA7134_MAIN_CTRL_TE4 | + SAA7134_MAIN_CTRL_TE5; + } + + /* screen overlay -- dma 0 + video task B */ + if (dev->ovenable) { + task |= 0x10; + ctrl |= SAA7134_MAIN_CTRL_TE1; + ov = dev->ovfield; + } + + /* vbi capture -- dma 0 + vbi task A+B */ + if (dev->vbi_q.curr) { + task |= 0x22; + ctrl |= SAA7134_MAIN_CTRL_TE2 | + SAA7134_MAIN_CTRL_TE3; + irq |= SAA7134_IRQ1_INTE_RA0_7 | + SAA7134_IRQ1_INTE_RA0_6 | + SAA7134_IRQ1_INTE_RA0_5 | + SAA7134_IRQ1_INTE_RA0_4; + } + + /* audio capture -- dma 3 */ + if (dev->dmasound.dma_running) { + ctrl |= SAA7134_MAIN_CTRL_TE6; + irq |= SAA7134_IRQ1_INTE_RA3_1 | + SAA7134_IRQ1_INTE_RA3_0; + } + + /* TS capture -- dma 5 */ + if (dev->ts_q.curr) { + ctrl |= SAA7134_MAIN_CTRL_TE5; + irq |= SAA7134_IRQ1_INTE_RA2_1 | + SAA7134_IRQ1_INTE_RA2_0; + } + + /* set task conditions + field handling */ + if (V4L2_FIELD_HAS_BOTH(cap) || V4L2_FIELD_HAS_BOTH(ov) || cap == ov) { + /* default config -- use full frames */ + saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d); + saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d); + saa_writeb(SAA7134_FIELD_HANDLING(TASK_A), 0x02); + saa_writeb(SAA7134_FIELD_HANDLING(TASK_B), 0x02); + split = 0; + } else { + /* split fields between tasks */ + if (V4L2_FIELD_TOP == cap) { + /* odd A, even B, repeat */ + saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d); + saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0e); + } else { + /* odd B, even A, repeat */ + saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0e); + saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d); + } + saa_writeb(SAA7134_FIELD_HANDLING(TASK_A), 0x01); + saa_writeb(SAA7134_FIELD_HANDLING(TASK_B), 0x01); + split = 1; + } + + /* irqs */ + saa_writeb(SAA7134_REGION_ENABLE, task); + saa_writel(SAA7134_IRQ1, irq); + saa_andorl(SAA7134_MAIN_CTRL, + SAA7134_MAIN_CTRL_TE0 | + SAA7134_MAIN_CTRL_TE1 | + SAA7134_MAIN_CTRL_TE2 | + SAA7134_MAIN_CTRL_TE3 | + SAA7134_MAIN_CTRL_TE4 | + SAA7134_MAIN_CTRL_TE5 | + SAA7134_MAIN_CTRL_TE6, + ctrl); + dprintk("dmabits: task=0x%02x ctrl=0x%02x irq=0x%x split=%s\n", + task, ctrl, irq, split ? "no" : "yes"); + + return 0; +} + +/* ------------------------------------------------------------------ */ +/* IRQ handler + helpers */ + +static char *irqbits[] = { + "DONE_RA0", "DONE_RA1", "DONE_RA2", "DONE_RA3", + "AR", "PE", "PWR_ON", "RDCAP", "INTL", "FIDT", "MMC", + "TRIG_ERR", "CONF_ERR", "LOAD_ERR", + "GPIO16", "GPIO18", "GPIO22", "GPIO23" +}; +#define IRQBITS ARRAY_SIZE(irqbits) + +static void print_irqstatus(struct saa7134_dev *dev, int loop, + unsigned long report, unsigned long status) +{ + unsigned int i; + + printk(KERN_DEBUG "%s/irq[%d,%ld]: r=0x%lx s=0x%02lx", + dev->name,loop,jiffies,report,status); + for (i = 0; i < IRQBITS; i++) { + if (!(report & (1 << i))) + continue; + printk(" %s",irqbits[i]); + } + if (report & SAA7134_IRQ_REPORT_DONE_RA0) { + printk(" | RA0=%s,%s,%s,%ld", + (status & 0x40) ? "vbi" : "video", + (status & 0x20) ? "b" : "a", + (status & 0x10) ? "odd" : "even", + (status & 0x0f)); + } + printk("\n"); +} + +static irqreturn_t saa7134_irq(int irq, void *dev_id) +{ + struct saa7134_dev *dev = (struct saa7134_dev*) dev_id; + unsigned long report,status; + int loop, handled = 0; + + if (dev->insuspend) + goto out; + + for (loop = 0; loop < 10; loop++) { + report = saa_readl(SAA7134_IRQ_REPORT); + status = saa_readl(SAA7134_IRQ_STATUS); + + /* If dmasound support is active and we get a sound report, + * mask out the report and let the saa7134-alsa module deal + * with it */ + if ((report & SAA7134_IRQ_REPORT_DONE_RA3) && + (dev->dmasound.priv_data != NULL) ) + { + if (irq_debug > 1) + printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n", + dev->name); + report &= ~SAA7134_IRQ_REPORT_DONE_RA3; + } + + if (0 == report) { + if (irq_debug > 1) + printk(KERN_DEBUG "%s/irq: no (more) work\n", + dev->name); + goto out; + } + + handled = 1; + saa_writel(SAA7134_IRQ_REPORT,report); + if (irq_debug) + print_irqstatus(dev,loop,report,status); + + + if ((report & SAA7134_IRQ_REPORT_RDCAP) || + (report & SAA7134_IRQ_REPORT_INTL)) + saa7134_irq_video_signalchange(dev); + + + if ((report & SAA7134_IRQ_REPORT_DONE_RA0) && + (status & 0x60) == 0) + saa7134_irq_video_done(dev,status); + + if ((report & SAA7134_IRQ_REPORT_DONE_RA0) && + (status & 0x40) == 0x40) + saa7134_irq_vbi_done(dev,status); + + if ((report & SAA7134_IRQ_REPORT_DONE_RA2) && + card_has_mpeg(dev)) + saa7134_irq_ts_done(dev,status); + + if (report & SAA7134_IRQ_REPORT_GPIO16) { + switch (dev->has_remote) { + case SAA7134_REMOTE_GPIO: + if (!dev->remote) + break; + if (dev->remote->mask_keydown & 0x10000) { + saa7134_input_irq(dev); + } + break; + + case SAA7134_REMOTE_I2C: + break; /* FIXME: invoke I2C get_key() */ + + default: /* GPIO16 not used by IR remote */ + break; + } + } + + if (report & SAA7134_IRQ_REPORT_GPIO18) { + switch (dev->has_remote) { + case SAA7134_REMOTE_GPIO: + if (!dev->remote) + break; + if ((dev->remote->mask_keydown & 0x40000) || + (dev->remote->mask_keyup & 0x40000)) { + saa7134_input_irq(dev); + } + break; + + case SAA7134_REMOTE_I2C: + break; /* FIXME: invoke I2C get_key() */ + + default: /* GPIO18 not used by IR remote */ + break; + } + } + } + + if (10 == loop) { + print_irqstatus(dev,loop,report,status); + if (report & SAA7134_IRQ_REPORT_PE) { + /* disable all parity error */ + printk(KERN_WARNING "%s/irq: looping -- " + "clearing PE (parity error!) enable bit\n",dev->name); + saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE); + } else if (report & SAA7134_IRQ_REPORT_GPIO16) { + /* disable gpio16 IRQ */ + printk(KERN_WARNING "%s/irq: looping -- " + "clearing GPIO16 enable bit\n",dev->name); + saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P); + saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N); + } else if (report & SAA7134_IRQ_REPORT_GPIO18) { + /* disable gpio18 IRQs */ + printk(KERN_WARNING "%s/irq: looping -- " + "clearing GPIO18 enable bit\n",dev->name); + saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P); + saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N); + } else { + /* disable all irqs */ + printk(KERN_WARNING "%s/irq: looping -- " + "clearing all enable bits\n",dev->name); + saa_writel(SAA7134_IRQ1,0); + saa_writel(SAA7134_IRQ2,0); + } + } + + out: + return IRQ_RETVAL(handled); +} + +/* ------------------------------------------------------------------ */ + +/* early init (no i2c, no irq) */ + +static int saa7134_hw_enable1(struct saa7134_dev *dev) +{ + /* RAM FIFO config */ + saa_writel(SAA7134_FIFO_SIZE, 0x08070503); + saa_writel(SAA7134_THRESHOULD, 0x02020202); + + /* enable audio + video processing */ + saa_writel(SAA7134_MAIN_CTRL, + SAA7134_MAIN_CTRL_VPLLE | + SAA7134_MAIN_CTRL_APLLE | + SAA7134_MAIN_CTRL_EXOSC | + SAA7134_MAIN_CTRL_EVFE1 | + SAA7134_MAIN_CTRL_EVFE2 | + SAA7134_MAIN_CTRL_ESFE | + SAA7134_MAIN_CTRL_EBDAC); + + /* + * Initialize OSS _after_ enabling audio clock PLL and audio processing. + * OSS initialization writes to registers via the audio DSP; these + * writes will fail unless the audio clock has been started. At worst, + * audio will not work. + */ + + /* enable peripheral devices */ + saa_writeb(SAA7134_SPECIAL_MODE, 0x01); + + /* set vertical line numbering start (vbi needs this) */ + saa_writeb(SAA7134_SOURCE_TIMING2, 0x20); + + return 0; +} + +static int saa7134_hwinit1(struct saa7134_dev *dev) +{ + dprintk("hwinit1\n"); + + saa_writel(SAA7134_IRQ1, 0); + saa_writel(SAA7134_IRQ2, 0); + + /* Clear any stale IRQ reports */ + saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT)); + + mutex_init(&dev->lock); + spin_lock_init(&dev->slock); + + saa7134_track_gpio(dev,"pre-init"); + saa7134_video_init1(dev); + saa7134_vbi_init1(dev); + if (card_has_mpeg(dev)) + saa7134_ts_init1(dev); + saa7134_input_init1(dev); + + saa7134_hw_enable1(dev); + + return 0; +} + +/* late init (with i2c + irq) */ +static int saa7134_hw_enable2(struct saa7134_dev *dev) +{ + + unsigned int irq2_mask; + + /* enable IRQ's */ + irq2_mask = + SAA7134_IRQ2_INTE_DEC3 | + SAA7134_IRQ2_INTE_DEC2 | + SAA7134_IRQ2_INTE_DEC1 | + SAA7134_IRQ2_INTE_DEC0 | + SAA7134_IRQ2_INTE_PE | + SAA7134_IRQ2_INTE_AR; + + if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) { + if (dev->remote->mask_keydown & 0x10000) + irq2_mask |= SAA7134_IRQ2_INTE_GPIO16_N; + else { /* Allow enabling both IRQ edge triggers */ + if (dev->remote->mask_keydown & 0x40000) + irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_P; + if (dev->remote->mask_keyup & 0x40000) + irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_N; + } + } + + if (dev->has_remote == SAA7134_REMOTE_I2C) { + request_module("ir-kbd-i2c"); + } + + saa_writel(SAA7134_IRQ1, 0); + saa_writel(SAA7134_IRQ2, irq2_mask); + + return 0; +} + +static int saa7134_hwinit2(struct saa7134_dev *dev) +{ + + dprintk("hwinit2\n"); + + saa7134_video_init2(dev); + saa7134_tvaudio_init2(dev); + + saa7134_hw_enable2(dev); + + return 0; +} + + +/* shutdown */ +static int saa7134_hwfini(struct saa7134_dev *dev) +{ + dprintk("hwfini\n"); + + if (card_has_mpeg(dev)) + saa7134_ts_fini(dev); + saa7134_input_fini(dev); + saa7134_vbi_fini(dev); + saa7134_tvaudio_fini(dev); + return 0; +} + +static void must_configure_manually(int has_eeprom) +{ + unsigned int i,p; + + if (!has_eeprom) + printk(KERN_WARNING + "saa7134: \n" + "saa7134: Congratulations! Your TV card vendor saved a few\n" + "saa7134: cents for a eeprom, thus your pci board has no\n" + "saa7134: subsystem ID and I can't identify it automatically\n" + "saa7134: \n" + "saa7134: I feel better now. Ok, here are the good news:\n" + "saa7134: You can use the card= insmod option to specify\n" + "saa7134: which board do you have. The list:\n"); + else + printk(KERN_WARNING + "saa7134: Board is currently unknown. You might try to use the card=\n" + "saa7134: insmod option to specify which board do you have, but this is\n" + "saa7134: somewhat risky, as might damage your card. It is better to ask\n" + "saa7134: for support at linux-media@vger.kernel.org.\n" + "saa7134: The supported cards are:\n"); + + for (i = 0; i < saa7134_bcount; i++) { + printk(KERN_WARNING "saa7134: card=%d -> %-40.40s", + i,saa7134_boards[i].name); + for (p = 0; saa7134_pci_tbl[p].driver_data; p++) { + if (saa7134_pci_tbl[p].driver_data != i) + continue; + printk(" %04x:%04x", + saa7134_pci_tbl[p].subvendor, + saa7134_pci_tbl[p].subdevice); + } + printk("\n"); + } +} + +static struct video_device *vdev_init(struct saa7134_dev *dev, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + vfd->v4l2_dev = &dev->v4l2_dev; + vfd->release = video_device_release; + vfd->debug = video_debug; + snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", + dev->name, type, saa7134_boards[dev->board].name); + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + video_set_drvdata(vfd, dev); + return vfd; +} + +static void saa7134_unregister_video(struct saa7134_dev *dev) +{ + if (dev->video_dev) { + if (video_is_registered(dev->video_dev)) + video_unregister_device(dev->video_dev); + else + video_device_release(dev->video_dev); + dev->video_dev = NULL; + } + if (dev->vbi_dev) { + if (video_is_registered(dev->vbi_dev)) + video_unregister_device(dev->vbi_dev); + else + video_device_release(dev->vbi_dev); + dev->vbi_dev = NULL; + } + if (dev->radio_dev) { + if (video_is_registered(dev->radio_dev)) + video_unregister_device(dev->radio_dev); + else + video_device_release(dev->radio_dev); + dev->radio_dev = NULL; + } +} + +static void mpeg_ops_attach(struct saa7134_mpeg_ops *ops, + struct saa7134_dev *dev) +{ + int err; + + if (NULL != dev->mops) + return; + if (saa7134_boards[dev->board].mpeg != ops->type) + return; + err = ops->init(dev); + if (0 != err) + return; + dev->mops = ops; +} + +static void mpeg_ops_detach(struct saa7134_mpeg_ops *ops, + struct saa7134_dev *dev) +{ + if (NULL == dev->mops) + return; + if (dev->mops != ops) + return; + dev->mops->fini(dev); + dev->mops = NULL; +} + +static int saa7134_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct saa7134_dev *dev; + struct saa7134_mpeg_ops *mops; + int err; + + if (saa7134_devcount == SAA7134_MAXBOARDS) + return -ENOMEM; + + dev = kzalloc(sizeof(*dev),GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev); + if (err) + goto fail0; + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + goto fail1; + } + + dev->nr = saa7134_devcount; + sprintf(dev->name,"saa%x[%d]",pci_dev->device,dev->nr); + + /* pci quirks */ + if (pci_pci_problems) { + if (pci_pci_problems & PCIPCI_TRITON) + printk(KERN_INFO "%s: quirk: PCIPCI_TRITON\n", dev->name); + if (pci_pci_problems & PCIPCI_NATOMA) + printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA\n", dev->name); + if (pci_pci_problems & PCIPCI_VIAETBF) + printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF\n", dev->name); + if (pci_pci_problems & PCIPCI_VSFX) + printk(KERN_INFO "%s: quirk: PCIPCI_VSFX\n",dev->name); +#ifdef PCIPCI_ALIMAGIK + if (pci_pci_problems & PCIPCI_ALIMAGIK) { + printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n", + dev->name); + latency = 0x0A; + } +#endif + if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) { + printk(KERN_INFO "%s: quirk: this driver and your " + "chipset may not work together" + " in overlay mode.\n",dev->name); + if (!saa7134_no_overlay) { + printk(KERN_INFO "%s: quirk: overlay " + "mode will be disabled.\n", + dev->name); + saa7134_no_overlay = 1; + } else { + printk(KERN_INFO "%s: quirk: overlay " + "mode will be forced. Use this" + " option at your own risk.\n", + dev->name); + } + } + } + if (UNSET != latency) { + printk(KERN_INFO "%s: setting pci latency timer to %d\n", + dev->name,latency); + pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency); + } + + /* print pci info */ + dev->pci_rev = pci_dev->revision; + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", dev->name, + pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0)); + pci_set_master(pci_dev); + if (!pci_dma_supported(pci_dev, DMA_BIT_MASK(32))) { + printk("%s: Oops: no 32bit PCI DMA ???\n",dev->name); + err = -EIO; + goto fail1; + } + + /* board config */ + dev->board = pci_id->driver_data; + if ((unsigned)card[dev->nr] < saa7134_bcount) + dev->board = card[dev->nr]; + if (SAA7134_BOARD_UNKNOWN == dev->board) + must_configure_manually(0); + else if (SAA7134_BOARD_NOAUTO == dev->board) { + must_configure_manually(1); + dev->board = SAA7134_BOARD_UNKNOWN; + } + dev->autodetected = card[dev->nr] != dev->board; + dev->tuner_type = saa7134_boards[dev->board].tuner_type; + dev->tuner_addr = saa7134_boards[dev->board].tuner_addr; + dev->radio_type = saa7134_boards[dev->board].radio_type; + dev->radio_addr = saa7134_boards[dev->board].radio_addr; + dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf; + if (UNSET != tuner[dev->nr]) + dev->tuner_type = tuner[dev->nr]; + printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + dev->name,pci_dev->subsystem_vendor, + pci_dev->subsystem_device,saa7134_boards[dev->board].name, + dev->board, dev->autodetected ? + "autodetected" : "insmod option"); + + /* get mmio */ + if (!request_mem_region(pci_resource_start(pci_dev,0), + pci_resource_len(pci_dev,0), + dev->name)) { + err = -EBUSY; + printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n", + dev->name,(unsigned long long)pci_resource_start(pci_dev,0)); + goto fail1; + } + dev->lmmio = ioremap(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0)); + dev->bmmio = (__u8 __iomem *)dev->lmmio; + if (NULL == dev->lmmio) { + err = -EIO; + printk(KERN_ERR "%s: can't ioremap() MMIO memory\n", + dev->name); + goto fail2; + } + + /* initialize hardware #1 */ + saa7134_board_init1(dev); + saa7134_hwinit1(dev); + + /* get irq */ + err = request_irq(pci_dev->irq, saa7134_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, dev); + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d\n", + dev->name,pci_dev->irq); + goto fail3; + } + + /* wait a bit, register i2c bus */ + msleep(100); + saa7134_i2c_register(dev); + saa7134_board_init2(dev); + + saa7134_hwinit2(dev); + + /* load i2c helpers */ + if (card_is_empress(dev)) { + struct v4l2_subdev *sd = + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "saa6752hs", + saa7134_boards[dev->board].empress_addr, NULL); + + if (sd) + sd->grp_id = GRP_EMPRESS; + } + + if (saa7134_boards[dev->board].rds_addr) { + struct v4l2_subdev *sd; + + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "saa6588", + 0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr)); + if (sd) { + printk(KERN_INFO "%s: found RDS decoder\n", dev->name); + dev->has_rds = 1; + } + } + + mutex_lock(&saa7134_devlist_lock); + list_for_each_entry(mops, &mops_list, next) + mpeg_ops_attach(mops, dev); + list_add_tail(&dev->devlist, &saa7134_devlist); + mutex_unlock(&saa7134_devlist_lock); + + /* check for signal */ + saa7134_irq_video_signalchange(dev); + + if (TUNER_ABSENT != dev->tuner_type) + saa_call_all(dev, core, s_power, 0); + + /* register v4l devices */ + if (saa7134_no_overlay > 0) + printk(KERN_INFO "%s: Overlay support disabled.\n", dev->name); + + dev->video_dev = vdev_init(dev,&saa7134_video_template,"video"); + err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER, + video_nr[dev->nr]); + if (err < 0) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); + goto fail4; + } + printk(KERN_INFO "%s: registered device %s [v4l2]\n", + dev->name, video_device_node_name(dev->video_dev)); + + dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi"); + + err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI, + vbi_nr[dev->nr]); + if (err < 0) + goto fail4; + printk(KERN_INFO "%s: registered device %s\n", + dev->name, video_device_node_name(dev->vbi_dev)); + + if (card_has_radio(dev)) { + dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio"); + err = video_register_device(dev->radio_dev,VFL_TYPE_RADIO, + radio_nr[dev->nr]); + if (err < 0) + goto fail4; + printk(KERN_INFO "%s: registered device %s\n", + dev->name, video_device_node_name(dev->radio_dev)); + } + + /* everything worked */ + saa7134_devcount++; + + if (saa7134_dmasound_init && !dev->dmasound.priv_data) + saa7134_dmasound_init(dev); + + request_submodules(dev); + return 0; + + fail4: + saa7134_unregister_video(dev); + saa7134_i2c_unregister(dev); + free_irq(pci_dev->irq, dev); + fail3: + saa7134_hwfini(dev); + iounmap(dev->lmmio); + fail2: + release_mem_region(pci_resource_start(pci_dev,0), + pci_resource_len(pci_dev,0)); + fail1: + v4l2_device_unregister(&dev->v4l2_dev); + fail0: + kfree(dev); + return err; +} + +static void saa7134_finidev(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev); + struct saa7134_mpeg_ops *mops; + + flush_request_submodules(dev); + + /* Release DMA sound modules if present */ + if (saa7134_dmasound_exit && dev->dmasound.priv_data) { + saa7134_dmasound_exit(dev); + } + + /* debugging ... */ + if (irq_debug) { + u32 report = saa_readl(SAA7134_IRQ_REPORT); + u32 status = saa_readl(SAA7134_IRQ_STATUS); + print_irqstatus(dev,42,report,status); + } + + /* disable peripheral devices */ + saa_writeb(SAA7134_SPECIAL_MODE,0); + + /* shutdown hardware */ + saa_writel(SAA7134_IRQ1,0); + saa_writel(SAA7134_IRQ2,0); + saa_writel(SAA7134_MAIN_CTRL,0); + + /* shutdown subsystems */ + saa7134_hwfini(dev); + + /* unregister */ + mutex_lock(&saa7134_devlist_lock); + list_del(&dev->devlist); + list_for_each_entry(mops, &mops_list, next) + mpeg_ops_detach(mops, dev); + mutex_unlock(&saa7134_devlist_lock); + saa7134_devcount--; + + saa7134_i2c_unregister(dev); + saa7134_unregister_video(dev); + + + /* the DMA sound modules should be unloaded before reaching + this, but just in case they are still present... */ + if (dev->dmasound.priv_data != NULL) { + free_irq(pci_dev->irq, &dev->dmasound); + dev->dmasound.priv_data = NULL; + } + + + /* release resources */ + free_irq(pci_dev->irq, dev); + iounmap(dev->lmmio); + release_mem_region(pci_resource_start(pci_dev,0), + pci_resource_len(pci_dev,0)); + + + v4l2_device_unregister(&dev->v4l2_dev); + + /* free memory */ + kfree(dev); +} + +#ifdef CONFIG_PM + +/* resends a current buffer in queue after resume */ +static int saa7134_buffer_requeue(struct saa7134_dev *dev, + struct saa7134_dmaqueue *q) +{ + struct saa7134_buf *buf, *next; + + assert_spin_locked(&dev->slock); + + buf = q->curr; + next = buf; + dprintk("buffer_requeue\n"); + + if (!buf) + return 0; + + dprintk("buffer_requeue : resending active buffers \n"); + + if (!list_empty(&q->queue)) + next = list_entry(q->queue.next, struct saa7134_buf, + vb.queue); + buf->activate(dev, buf, next); + + return 0; +} + +static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev); + + /* disable overlay - apps should enable it explicitly on resume*/ + dev->ovenable = 0; + + /* Disable interrupts, DMA, and rest of the chip*/ + saa_writel(SAA7134_IRQ1, 0); + saa_writel(SAA7134_IRQ2, 0); + saa_writel(SAA7134_MAIN_CTRL, 0); + + dev->insuspend = 1; + synchronize_irq(pci_dev->irq); + + /* ACK interrupts once more, just in case, + since the IRQ handler won't ack them anymore*/ + + saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT)); + + /* Disable timeout timers - if we have active buffers, we will + fill them on resume*/ + + del_timer(&dev->video_q.timeout); + del_timer(&dev->vbi_q.timeout); + del_timer(&dev->ts_q.timeout); + + if (dev->remote) + saa7134_ir_stop(dev); + + pci_save_state(pci_dev); + pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); + + return 0; +} + +static int saa7134_resume(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev); + unsigned long flags; + + pci_set_power_state(pci_dev, PCI_D0); + pci_restore_state(pci_dev); + + /* Do things that are done in saa7134_initdev , + except of initializing memory structures.*/ + + saa7134_board_init1(dev); + + /* saa7134_hwinit1 */ + if (saa7134_boards[dev->board].video_out) + saa7134_videoport_init(dev); + if (card_has_mpeg(dev)) + saa7134_ts_init_hw(dev); + if (dev->remote) + saa7134_ir_start(dev); + saa7134_hw_enable1(dev); + + msleep(100); + + saa7134_board_init2(dev); + + /*saa7134_hwinit2*/ + saa7134_set_tvnorm_hw(dev); + saa7134_tvaudio_setmute(dev); + saa7134_tvaudio_setvolume(dev, dev->ctl_volume); + saa7134_tvaudio_init(dev); + saa7134_enable_i2s(dev); + saa7134_hw_enable2(dev); + + saa7134_irq_video_signalchange(dev); + + /*resume unfinished buffer(s)*/ + spin_lock_irqsave(&dev->slock, flags); + saa7134_buffer_requeue(dev, &dev->video_q); + saa7134_buffer_requeue(dev, &dev->vbi_q); + saa7134_buffer_requeue(dev, &dev->ts_q); + + /* FIXME: Disable DMA audio sound - temporary till proper support + is implemented*/ + + dev->dmasound.dma_running = 0; + + /* start DMA now*/ + dev->insuspend = 0; + smp_wmb(); + saa7134_set_dmabits(dev); + spin_unlock_irqrestore(&dev->slock, flags); + + return 0; +} +#endif + +/* ----------------------------------------------------------- */ + +int saa7134_ts_register(struct saa7134_mpeg_ops *ops) +{ + struct saa7134_dev *dev; + + mutex_lock(&saa7134_devlist_lock); + list_for_each_entry(dev, &saa7134_devlist, devlist) + mpeg_ops_attach(ops, dev); + list_add_tail(&ops->next,&mops_list); + mutex_unlock(&saa7134_devlist_lock); + return 0; +} + +void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops) +{ + struct saa7134_dev *dev; + + mutex_lock(&saa7134_devlist_lock); + list_del(&ops->next); + list_for_each_entry(dev, &saa7134_devlist, devlist) + mpeg_ops_detach(ops, dev); + mutex_unlock(&saa7134_devlist_lock); +} + +EXPORT_SYMBOL(saa7134_ts_register); +EXPORT_SYMBOL(saa7134_ts_unregister); + +/* ----------------------------------------------------------- */ + +static struct pci_driver saa7134_pci_driver = { + .name = "saa7134", + .id_table = saa7134_pci_tbl, + .probe = saa7134_initdev, + .remove = saa7134_finidev, +#ifdef CONFIG_PM + .suspend = saa7134_suspend, + .resume = saa7134_resume +#endif +}; + +static int __init saa7134_init(void) +{ + INIT_LIST_HEAD(&saa7134_devlist); + printk(KERN_INFO "saa7130/34: v4l2 driver version %s loaded\n", + SAA7134_VERSION); + return pci_register_driver(&saa7134_pci_driver); +} + +static void __exit saa7134_fini(void) +{ + pci_unregister_driver(&saa7134_pci_driver); +} + +module_init(saa7134_init); +module_exit(saa7134_fini); + +/* ----------------------------------------------------------- */ + +EXPORT_SYMBOL(saa7134_set_gpio); +EXPORT_SYMBOL(saa7134_boards); + +/* ----------------- for the DMA sound modules --------------- */ + +EXPORT_SYMBOL(saa7134_dmasound_init); +EXPORT_SYMBOL(saa7134_dmasound_exit); +EXPORT_SYMBOL(saa7134_pgtable_free); +EXPORT_SYMBOL(saa7134_pgtable_build); +EXPORT_SYMBOL(saa7134_pgtable_alloc); +EXPORT_SYMBOL(saa7134_set_dmabits); + +/* ----------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134-dvb.c b/drivers/media/pci/saa7134/saa7134-dvb.c new file mode 100644 index 00000000..4a08ae31 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-dvb.c @@ -0,0 +1,1964 @@ +/* + * + * (c) 2004 Gerd Knorr [SuSE Labs] + * + * Extended 3 / 2005 by Hartmut Hackmann to support various + * cards with the tda10046 DVB-T channel decoder + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" +#include +#include "dvb-pll.h" +#include + +#include "mt352.h" +#include "mt352_priv.h" /* FIXME */ +#include "tda1004x.h" +#include "nxt200x.h" +#include "tuner-xc2028.h" +#include "xc5000.h" + +#include "tda10086.h" +#include "tda826x.h" +#include "tda827x.h" +#include "isl6421.h" +#include "isl6405.h" +#include "lnbp21.h" +#include "tuner-simple.h" +#include "tda10048.h" +#include "tda18271.h" +#include "lgdt3305.h" +#include "tda8290.h" +#include "mb86a20s.h" +#include "lgs8gxx.h" + +#include "zl10353.h" +#include "qt1010.h" + +#include "zl10036.h" +#include "zl10039.h" +#include "mt312.h" +#include "s5h1411.h" + +MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); +MODULE_LICENSE("GPL"); + +static unsigned int antenna_pwr; + +module_param(antenna_pwr, int, 0444); +MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); + +static int use_frontend; +module_param(use_frontend, int, 0644); +MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off)."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define dprintk(fmt, arg...) do { if (debug) \ + printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0) + +/* Print a warning */ +#define wprintk(fmt, arg...) \ + printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg) + +/* ------------------------------------------------------------------ + * mt352 based DVB-T cards + */ + +static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) +{ + u32 ok; + + if (!on) { + saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); + saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); + return 0; + } + + saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); + saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); + udelay(10); + + saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28)); + saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); + udelay(10); + saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); + udelay(10); + ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); + dprintk("%s %s\n", __func__, ok ? "on" : "off"); + + if (!ok) + saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); + return ok; +} + +static int mt352_pinnacle_init(struct dvb_frontend* fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 }; + static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f }; + static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d }; + static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; + struct saa7134_dev *dev= fe->dvb->priv; + + dprintk("%s called\n", __func__); + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + + mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); + mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); + mt352_write(fe, irq_cfg, sizeof(irq_cfg)); + + return 0; +} + +static int mt352_aver777_init(struct dvb_frontend* fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0xe }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + return 0; +} + +static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 off[] = { 0x00, 0xf1}; + u8 on[] = { 0x00, 0x71}; + struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; + + struct saa7134_dev *dev = fe->dvb->priv; + struct v4l2_frequency f; + + /* set frequency (mt2050) */ + f.tuner = 0; + f.type = V4L2_TUNER_DIGITAL_TV; + f.frequency = c->frequency / 1000 * 16 / 1000; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &msg, 1); + saa_call_all(dev, tuner, s_frequency, &f); + msg.buf = on; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &msg, 1); + + pinnacle_antenna_pwr(dev, antenna_pwr); + + /* mt352 setup */ + return mt352_pinnacle_init(fe); +} + +static struct mt352_config pinnacle_300i = { + .demod_address = 0x3c >> 1, + .adc_clock = 20333, + .if2 = 36150, + .no_tuner = 1, + .demod_init = mt352_pinnacle_init, +}; + +static struct mt352_config avermedia_777 = { + .demod_address = 0xf, + .demod_init = mt352_aver777_init, +}; + +static struct mt352_config avermedia_xc3028_mt352_dev = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .demod_init = mt352_avermedia_xc3028_init, +}; + +static struct tda18271_std_map mb86a20s_tda18271_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 7, .rfagc_top = 0x37, }, +}; + +static struct tda18271_config kworld_tda18271_config = { + .std_map = &mb86a20s_tda18271_std_map, + .gate = TDA18271_GATE_DIGITAL, + .config = 3, /* Use tuner callback for AGC */ + +}; + +static const struct mb86a20s_config kworld_mb86a20s_config = { + .demod_address = 0x10, +}; + +static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct saa7134_dev *dev = fe->dvb->priv; + + unsigned char initmsg[] = {0x45, 0x97}; + unsigned char msg_enable[] = {0x45, 0xc1}; + unsigned char msg_disable[] = {0x45, 0x81}; + struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; + + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { + wprintk("could not access the I2C gate\n"); + return -EIO; + } + if (enable) + msg.buf = msg_enable; + else + msg.buf = msg_disable; + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { + wprintk("could not access the I2C gate\n"); + return -EIO; + } + msleep(20); + return 0; +} + +/* ================================================================== + * tda1004x based DVB-T cards, helper functions + */ + +static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct saa7134_dev *dev = fe->dvb->priv; + return request_firmware(fw, name, &dev->pci->dev); +} + +/* ------------------------------------------------------------------ + * these tuners are tu1216, td1316(a) + */ + +static int philips_tda6651_pll_set(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + u8 addr = state->config->tuner_address; + u8 tuner_buf[4]; + struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = + sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + /* determine charge pump */ + tuner_frequency = c->frequency + 36166000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) + cp = 3; + else if (tuner_frequency < 160000000) + cp = 5; + else if (tuner_frequency < 200000000) + cp = 6; + else if (tuner_frequency < 290000000) + cp = 3; + else if (tuner_frequency < 420000000) + cp = 5; + else if (tuner_frequency < 480000000) + cp = 6; + else if (tuner_frequency < 620000000) + cp = 3; + else if (tuner_frequency < 830000000) + cp = 5; + else if (tuner_frequency < 895000000) + cp = 7; + else + return -EINVAL; + + /* determine band */ + if (c->frequency < 49000000) + return -EINVAL; + else if (c->frequency < 161000000) + band = 1; + else if (c->frequency < 444000000) + band = 2; + else if (c->frequency < 861000000) + band = 4; + else + return -EINVAL; + + /* setup PLL filter */ + switch (c->bandwidth_hz) { + case 6000000: + filter = 0; + break; + + case 7000000: + filter = 0; + break; + + case 8000000: + filter = 1; + break; + + default: + return -EINVAL; + } + + /* calculate divisor + * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) + */ + tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; + + /* setup tuner buffer */ + tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xca; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { + wprintk("could not write to tuner at addr: 0x%02x\n", + addr << 1); + return -EIO; + } + msleep(1); + return 0; +} + +static int philips_tu1216_init(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + u8 addr = state->config->tuner_address; + static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; + struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; + + /* setup PLL configuration */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + msleep(1); + + return 0; +} + +/* ------------------------------------------------------------------ */ + +static struct tda1004x_config philips_tu1216_60_config = { + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config philips_tu1216_61_config = { + + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; + +/* ------------------------------------------------------------------ */ + +static int philips_td1316_tuner_init(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + u8 addr = state->config->tuner_address; + static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; + struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; + + /* setup PLL configuration */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) + return -EIO; + return 0; +} + +static int philips_td1316_tuner_set_params(struct dvb_frontend *fe) +{ + return philips_tda6651_pll_set(fe); +} + +static int philips_td1316_tuner_sleep(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + u8 addr = state->config->tuner_address; + static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; + struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; + + /* switch the tuner to analog mode */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1) + return -EIO; + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int philips_europa_tuner_init(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 msg[] = { 0x00, 0x40}; + struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; + + + if (philips_td1316_tuner_init(fe)) + return -EIO; + msleep(1); + if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) + return -EIO; + + return 0; +} + +static int philips_europa_tuner_sleep(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + + static u8 msg[] = { 0x00, 0x14 }; + struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; + + if (philips_td1316_tuner_sleep(fe)) + return -EIO; + + /* switch the board to analog mode */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &analog_msg, 1); + return 0; +} + +static int philips_europa_demod_sleep(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + + if (dev->original_demod_sleep) + dev->original_demod_sleep(fe); + fe->ops.i2c_gate_ctrl(fe, 1); + return 0; +} + +static struct tda1004x_config philips_europa_config = { + + .demod_address = 0x8, + .invert = 0, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_IFO_AUTO_POS, + .if_freq = TDA10046_FREQ_052, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config medion_cardbus = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_IFO_AUTO_NEG, + .if_freq = TDA10046_FREQ_3613, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config technotrend_budget_t3000_config = { + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .tuner_address = 0x63, + .request_firmware = philips_tda1004x_request_firmware +}; + +/* ------------------------------------------------------------------ + * tda 1004x based cards with philips silicon tuner + */ + +static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) +{ + struct tda1004x_state *state = fe->demodulator_priv; + + u8 addr = state->config->i2c_gate; + static u8 tda8290_close[] = { 0x21, 0xc0}; + static u8 tda8290_open[] = { 0x21, 0x80}; + struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2}; + if (enable) { + tda8290_msg.buf = tda8290_close; + } else { + tda8290_msg.buf = tda8290_open; + } + if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { + struct saa7134_dev *dev = fe->dvb->priv; + wprintk("could not access tda8290 I2C gate\n"); + return -EIO; + } + msleep(20); + return 0; +} + +static int philips_tda827x_tuner_init(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + + switch (state->config->antenna_switch) { + case 0: break; + case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); + saa7134_set_gpio(dev, 21, 0); + break; + case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); + saa7134_set_gpio(dev, 21, 1); + break; + } + return 0; +} + +static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + + switch (state->config->antenna_switch) { + case 0: break; + case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); + saa7134_set_gpio(dev, 21, 1); + break; + case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); + saa7134_set_gpio(dev, 21, 0); + break; + } + return 0; +} + +static int configure_tda827x_fe(struct saa7134_dev *dev, + struct tda1004x_config *cdec_conf, + struct tda827x_config *tuner_conf) +{ + struct videobuf_dvb_frontend *fe0; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + + if (!fe0) + return -EINVAL; + + fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (cdec_conf->i2c_gate) + fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; + if (dvb_attach(tda827x_attach, fe0->dvb.frontend, + cdec_conf->tuner_address, + &dev->i2c_adap, tuner_conf)) + return 0; + + wprintk("no tda827x tuner found at addr: %02x\n", + cdec_conf->tuner_address); + } + return -EINVAL; +} + +/* ------------------------------------------------------------------ */ + +static struct tda827x_config tda827x_cfg_0 = { + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 0, + .switch_addr = 0 +}; + +static struct tda827x_config tda827x_cfg_1 = { + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 1, + .switch_addr = 0x4b +}; + +static struct tda827x_config tda827x_cfg_2 = { + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 2, + .switch_addr = 0x4b +}; + +static struct tda827x_config tda827x_cfg_2_sw42 = { + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 2, + .switch_addr = 0x42 +}; + +/* ------------------------------------------------------------------ */ + +static struct tda1004x_config tda827x_lifeview_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config philips_tiger_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 1, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config cinergy_ht_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config cinergy_ht_pci_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config philips_tiger_s_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 1, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config pinnacle_pctv_310i_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config hauppauge_hvr_1110_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config asus_p7131_dual_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 2, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config lifeview_trio_config = { + .demod_address = 0x09, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP00_I, + .if_freq = TDA10046_FREQ_045, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config tevion_dvbt220rf_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config md8800_dvbt_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config asus_p7131_4871_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 2, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config asus_p7131_hybrid_lna_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 2, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config kworld_dvb_t_210_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 1, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config avermedia_super_007_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x60, + .antenna_switch= 1, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config twinhan_dtv_dvb_3056_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x42, + .tuner_address = 0x61, + .antenna_switch = 1, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config asus_tiger_3in1_config = { + .demod_address = 0x0b, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch = 1, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct tda1004x_config asus_ps3_100_config = { + .demod_address = 0x0b, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch = 1, + .request_firmware = philips_tda1004x_request_firmware +}; + +/* ------------------------------------------------------------------ + * special case: this card uses saa713x GPIO22 for the mode switch + */ + +static int ads_duo_tuner_init(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + philips_tda827x_tuner_init(fe); + /* route TDA8275a AGC input to the channel decoder */ + saa7134_set_gpio(dev, 22, 1); + return 0; +} + +static int ads_duo_tuner_sleep(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + /* route TDA8275a AGC input to the analog IF chip*/ + saa7134_set_gpio(dev, 22, 0); + philips_tda827x_tuner_sleep(fe); + return 0; +} + +static struct tda827x_config ads_duo_cfg = { + .init = ads_duo_tuner_init, + .sleep = ads_duo_tuner_sleep, + .config = 0 +}; + +static struct tda1004x_config ads_tech_duo_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP00_I, + .if_freq = TDA10046_FREQ_045, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; + +static struct zl10353_config behold_h6_config = { + .demod_address = 0x1e>>1, + .no_tuner = 1, + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static struct xc5000_config behold_x7_tunerconfig = { + .i2c_address = 0xc2>>1, + .if_khz = 4560, + .radio_input = XC5000_RADIO_FM1, +}; + +static struct zl10353_config behold_x7_config = { + .demod_address = 0x1e>>1, + .if2 = 45600, + .no_tuner = 1, + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static struct zl10353_config videomate_t750_zl10353_config = { + .demod_address = 0x0f, + .no_tuner = 1, + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static struct qt1010_config videomate_t750_qt1010_config = { + .i2c_address = 0x62 +}; + + +/* ================================================================== + * tda10086 based DVB-S cards, helper functions + */ + +static struct tda10086_config flydvbs = { + .demod_address = 0x0e, + .invert = 0, + .diseqc_tone = 0, + .xtal_freq = TDA10086_XTAL_16M, +}; + +static struct tda10086_config sd1878_4m = { + .demod_address = 0x0e, + .invert = 0, + .diseqc_tone = 0, + .xtal_freq = TDA10086_XTAL_4M, +}; + +/* ------------------------------------------------------------------ + * special case: lnb supply is connected to the gated i2c + */ + +static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + int res = -EIO; + struct saa7134_dev *dev = fe->dvb->priv; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + if (dev->original_set_voltage) + res = dev->original_set_voltage(fe, voltage); + fe->ops.i2c_gate_ctrl(fe, 0); + } + return res; +}; + +static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) +{ + int res = -EIO; + struct saa7134_dev *dev = fe->dvb->priv; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + if (dev->original_set_high_voltage) + res = dev->original_set_high_voltage(fe, arg); + fe->ops.i2c_gate_ctrl(fe, 0); + } + return res; +}; + +static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct saa7134_dev *dev = fe->dvb->priv; + u8 wbuf[2] = { 0x1f, 00 }; + u8 rbuf; + struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, + { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; + + if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) + return -EIO; + /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ + if (voltage == SEC_VOLTAGE_18) + wbuf[1] = rbuf | 0x10; + else + wbuf[1] = rbuf & 0xef; + msg[0].len = 2; + i2c_transfer(&dev->i2c_adap, msg, 1); + return 0; +} + +static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) +{ + struct saa7134_dev *dev = fe->dvb->priv; + wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__); + return -EIO; +} + +/* ================================================================== + * nxt200x based ATSC cards, helper functions + */ + +static struct nxt200x_config avertvhda180 = { + .demod_address = 0x0a, +}; + +static struct nxt200x_config kworldatsc110 = { + .demod_address = 0x0a, +}; + +/* ------------------------------------------------------------------ */ + +static struct mt312_config avertv_a700_mt312 = { + .demod_address = 0x0e, + .voltage_inverted = 1, +}; + +static struct zl10036_config avertv_a700_tuner = { + .tuner_address = 0x60, +}; + +static struct mt312_config zl10313_compro_s350_config = { + .demod_address = 0x0e, +}; + +static struct mt312_config zl10313_avermedia_a706_config = { + .demod_address = 0x0e, +}; + +static struct lgdt3305_config hcw_lgdt3305_config = { + .i2c_addr = 0x0e, + .mpeg_mode = LGDT3305_MPEG_SERIAL, + .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .deny_i2c_rptr = 1, + .spectral_inversion = 1, + .qam_if_khz = 4000, + .vsb_if_khz = 3250, +}; + +static struct tda10048_config hcw_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, + .disable_gate_access = 1, +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x58, }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x58, }, +}; + +static struct tda18271_config hcw_tda18271_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .config = 3, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct tda829x_config tda829x_no_probe = { + .probe_tuner = TDA829X_DONT_PROBE, +}; + +static struct tda10048_config zolid_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, + .disable_gate_access = 1, +}; + +static struct tda18271_config zolid_tda18271_config = { + .gate = TDA18271_GATE_ANALOG, +}; + +static struct tda10048_config dtv1000s_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3800, + .dtv8_if_freq_khz = TDA10048_IF_4300, + .clk_freq_khz = TDA10048_CLK_16000, + .disable_gate_access = 1, +}; + +static struct tda18271_std_map dtv1000s_tda18271_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + +static struct tda18271_config dtv1000s_tda18271_config = { + .std_map = &dtv1000s_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, +}; + +static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = { + .prod = LGS8GXX_PROD_LGS8G75, + .demod_address = 0x1d, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 0, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 4000, /* 4.00 MHz */ + .if_neg_center = 0, + .ext_adc = 0, + .adc_signed = 1, + .adc_vpp = 3, /* 2.0 Vpp */ + .if_neg_edge = 1, +}; + +static struct tda18271_config prohdtv_pro2_tda18271_config = { + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct tda18271_std_map kworld_tda18271_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_config kworld_pc150u_tda18271_config = { + .std_map = &kworld_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, + .config = 3, /* Use tuner callback for AGC */ + .rf_cal_on_startup = 1 +}; + +static struct s5h1411_config kworld_s5h1411_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .qam_if = S5H1411_IF_4000, + .vsb_if = S5H1411_IF_3250, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = + S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + + +/* ================================================================== + * Core code + */ + +static int dvb_init(struct saa7134_dev *dev) +{ + int ret; + int attach_xc3028 = 0; + struct videobuf_dvb_frontend *fe0; + + /* FIXME: add support for multi-frontend */ + mutex_init(&dev->frontends.lock); + INIT_LIST_HEAD(&dev->frontends.felist); + + printk(KERN_INFO "%s() allocating 1 frontend\n", __func__); + fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, 1); + if (!fe0) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + return -ENOMEM; + } + + /* init struct videobuf_dvb */ + dev->ts.nr_bufs = 32; + dev->ts.nr_packets = 32*4; + fe0->dvb.name = dev->name; + videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_ALTERNATE, + sizeof(struct saa7134_buf), + dev, NULL); + + switch (dev->board) { + case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: + dprintk("pinnacle 300i dvb setup\n"); + fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; + } + break; + case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_A16AR: + dprintk("avertv 777 dvb setup\n"); + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x61, + TUNER_PHILIPS_TD1316); + } + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + dprintk("AverMedia A16D dvb setup\n"); + fe0->dvb.frontend = dvb_attach(mt352_attach, + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); + attach_xc3028 = 1; + break; + case SAA7134_BOARD_MD7134: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &medion_cardbus, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &dev->i2c_adap, medion_cardbus.tuner_address, + TUNER_PHILIPS_FMD1216ME_MK3); + } + break; + case SAA7134_BOARD_PHILIPS_TOUGH: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &philips_tu1216_60_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; + } + break; + case SAA7134_BOARD_FLYDVBTDUO: + case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: + if (configure_tda827x_fe(dev, &tda827x_lifeview_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_PHILIPS_EUROPA: + case SAA7134_BOARD_VIDEOMATE_DVBT_300: + case SAA7134_BOARD_ASUS_EUROPA_HYBRID: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &philips_europa_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; + fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + } + break; + case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &technotrend_budget_t3000_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; + fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + } + break; + case SAA7134_BOARD_VIDEOMATE_DVBT_200: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &philips_tu1216_61_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; + } + break; + case SAA7134_BOARD_KWORLD_DVBT_210: + if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config, + &tda827x_cfg_2) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1120: + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hcw_tda10048_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &hcw_tda18271_config); + } + break; + case SAA7134_BOARD_PHILIPS_TIGER: + if (configure_tda827x_fe(dev, &philips_tiger_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_PINNACLE_PCTV_310i: + if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, + &tda827x_cfg_1) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1110: + if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, + &tda827x_cfg_1) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1150: + fe0->dvb.frontend = dvb_attach(lgdt3305_attach, + &hcw_lgdt3305_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &hcw_tda18271_config); + } + break; + case SAA7134_BOARD_ASUSTeK_P7131_DUAL: + if (configure_tda827x_fe(dev, &asus_p7131_dual_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_FLYDVBT_LR301: + if (configure_tda827x_fe(dev, &tda827x_lifeview_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_FLYDVB_TRIO: + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &lifeview_trio_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + } else { /* satellite */ + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); + goto detach_frontend; + } + if (dvb_attach(isl6421_attach, fe0->dvb.frontend, + &dev->i2c_adap, + 0x08, 0, 0, false) == NULL) { + wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); + goto detach_frontend; + } + } + } + break; + case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: + case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &ads_tech_duo_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda827x_attach,fe0->dvb.frontend, + ads_tech_duo_config.tuner_address, &dev->i2c_adap, + &ads_duo_cfg) == NULL) { + wprintk("no tda827x tuner found at addr: %02x\n", + ads_tech_duo_config.tuner_address); + goto detach_frontend; + } + } else + wprintk("failed to attach tda10046\n"); + break; + case SAA7134_BOARD_TEVION_DVBT_220RF: + if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_MEDION_MD8800_QUADRO: + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &md8800_dvbt_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + } else { /* satellite */ + fe0->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (fe0->dvb.frontend) { + struct dvb_frontend *fe = fe0->dvb.frontend; + u8 dev_id = dev->eedata[2]; + u8 data = 0xc4; + struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; + + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Medion Quadro, no tda826x " + "found !\n", __func__); + goto detach_frontend; + } + if (dev_id != 0x08) { + /* we need to open the i2c gate (we know it exists) */ + fe->ops.i2c_gate_ctrl(fe, 1); + if (dvb_attach(isl6405_attach, fe, + &dev->i2c_adap, 0x08, 0, 0) == NULL) { + wprintk("%s: Medion Quadro, no ISL6405 " + "found !\n", __func__); + goto detach_frontend; + } + if (dev_id == 0x07) { + /* fire up the 2nd section of the LNB supply since + we can't do this from the other section */ + msg.buf = &data; + i2c_transfer(&dev->i2c_adap, &msg, 1); + } + fe->ops.i2c_gate_ctrl(fe, 0); + dev->original_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = md8800_set_voltage; + dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; + } else { + fe->ops.set_voltage = md8800_set_voltage2; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; + } + } + } + break; + case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: + fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, + &dev->i2c_adap); + if (fe0->dvb.frontend) + dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, + NULL, DVB_PLL_TDHU2); + break; + case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: + case SAA7134_BOARD_KWORLD_ATSC110: + fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, + &dev->i2c_adap); + if (fe0->dvb.frontend) + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x61, + TUNER_PHILIPS_TUV1236D); + break; + case SAA7134_BOARD_KWORLD_PC150U: + saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */ + saa7134_tuner_callback(dev, 0, + TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &kworld_s5h1411_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &kworld_pc150u_tda18271_config); + } + break; + case SAA7134_BOARD_FLYDVBS_LR300: + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: No tda826x found!\n", __func__); + goto detach_frontend; + } + if (dvb_attach(isl6421_attach, fe0->dvb.frontend, + &dev->i2c_adap, + 0x08, 0, 0, false) == NULL) { + wprintk("%s: No ISL6421 found!\n", __func__); + goto detach_frontend; + } + } + break; + case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &medion_cardbus, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &dev->i2c_adap, medion_cardbus.tuner_address, + TUNER_PHILIPS_FMD1216ME_MK3); + } + break; + case SAA7134_BOARD_VIDEOMATE_DVBT_200A: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &philips_europa_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + } + break; + case SAA7134_BOARD_CINERGY_HT_PCMCIA: + if (configure_tda827x_fe(dev, &cinergy_ht_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_CINERGY_HT_PCI: + if (configure_tda827x_fe(dev, &cinergy_ht_pci_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_PHILIPS_TIGER_S: + if (configure_tda827x_fe(dev, &philips_tiger_s_config, + &tda827x_cfg_2) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_ASUS_P7131_4871: + if (configure_tda827x_fe(dev, &asus_p7131_4871_config, + &tda827x_cfg_2) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: + if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, + &tda827x_cfg_2) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_AVERMEDIA_SUPER_007: + if (configure_tda827x_fe(dev, &avermedia_super_007_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: + if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, + &tda827x_cfg_2_sw42) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_PHILIPS_SNAKE: + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: No tda826x found!\n", __func__); + goto detach_frontend; + } + if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0, 0) == NULL) { + wprintk("%s: No lnbp21 found!\n", __func__); + goto detach_frontend; + } + } + break; + case SAA7134_BOARD_CREATIX_CTX953: + if (configure_tda827x_fe(dev, &md8800_dvbt_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_MSI_TVANYWHERE_AD11: + if (configure_tda827x_fe(dev, &philips_tiger_s_config, + &tda827x_cfg_2) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + dprintk("AverMedia E506R dvb setup\n"); + saa7134_set_gpio(dev, 25, 0); + msleep(10); + saa7134_set_gpio(dev, 25, 1); + fe0->dvb.frontend = dvb_attach(mt352_attach, + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); + attach_xc3028 = 1; + break; + case SAA7134_BOARD_MD7134_BRIDGE_2: + fe0->dvb.frontend = dvb_attach(tda10086_attach, + &sd1878_4m, &dev->i2c_adap); + if (fe0->dvb.frontend) { + struct dvb_frontend *fe; + if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, + &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { + wprintk("%s: MD7134 DVB-S, no SD1878 " + "found !\n", __func__); + goto detach_frontend; + } + /* we need to open the i2c gate (we know it exists) */ + fe = fe0->dvb.frontend; + fe->ops.i2c_gate_ctrl(fe, 1); + if (dvb_attach(isl6405_attach, fe, + &dev->i2c_adap, 0x08, 0, 0) == NULL) { + wprintk("%s: MD7134 DVB-S, no ISL6405 " + "found !\n", __func__); + goto detach_frontend; + } + fe->ops.i2c_gate_ctrl(fe, 0); + dev->original_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = md8800_set_voltage; + dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; + } + break; + case SAA7134_BOARD_AVERMEDIA_M103: + saa7134_set_gpio(dev, 25, 0); + msleep(10); + saa7134_set_gpio(dev, 25, 1); + fe0->dvb.frontend = dvb_attach(mt352_attach, + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); + attach_xc3028 = 1; + break; + case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &asus_tiger_3in1_config, + &tda827x_cfg_2) < 0) + goto detach_frontend; + } else { /* satellite */ + fe0->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, + fe0->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Asus Tiger 3in1, no " + "tda826x found!\n", __func__); + goto detach_frontend; + } + if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0, 0) == NULL) { + wprintk("%s: Asus Tiger 3in1, no lnbp21" + " found!\n", __func__); + goto detach_frontend; + } + } + } + break; + case SAA7134_BOARD_ASUSTeK_PS3_100: + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &asus_ps3_100_config, + &tda827x_cfg_2) < 0) + goto detach_frontend; + } else { /* satellite */ + fe0->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, + fe0->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Asus My Cinema PS3-100, no " + "tda826x found!\n", __func__); + goto detach_frontend; + } + if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0, 0) == NULL) { + wprintk("%s: Asus My Cinema PS3-100, no lnbp21" + " found!\n", __func__); + goto detach_frontend; + } + } + } + break; + case SAA7134_BOARD_ASUSTeK_TIGER: + if (configure_tda827x_fe(dev, &philips_tiger_config, + &tda827x_cfg_0) < 0) + goto detach_frontend; + break; + case SAA7134_BOARD_BEHOLD_H6: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &behold_h6_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216MEX_MK3); + } + break; + case SAA7134_BOARD_BEHOLD_X7: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &behold_x7_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dvb_attach(xc5000_attach, fe0->dvb.frontend, + &dev->i2c_adap, &behold_x7_tunerconfig); + } + break; + case SAA7134_BOARD_BEHOLD_H7: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &behold_x7_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dvb_attach(xc5000_attach, fe0->dvb.frontend, + &dev->i2c_adap, &behold_x7_tunerconfig); + } + break; + case SAA7134_BOARD_AVERMEDIA_A700_PRO: + case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: + /* Zarlink ZL10313 */ + fe0->dvb.frontend = dvb_attach(mt312_attach, + &avertv_a700_mt312, &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(zl10036_attach, fe0->dvb.frontend, + &avertv_a700_tuner, &dev->i2c_adap) == NULL) { + wprintk("%s: No zl10036 found!\n", + __func__); + } + } + break; + case SAA7134_BOARD_VIDEOMATE_S350: + fe0->dvb.frontend = dvb_attach(mt312_attach, + &zl10313_compro_s350_config, &dev->i2c_adap); + if (fe0->dvb.frontend) + if (dvb_attach(zl10039_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap) == NULL) + wprintk("%s: No zl10039 found!\n", + __func__); + + break; + case SAA7134_BOARD_VIDEOMATE_T750: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &videomate_t750_zl10353_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(qt1010_attach, + fe0->dvb.frontend, + &dev->i2c_adap, + &videomate_t750_qt1010_config) == NULL) + wprintk("error attaching QT1010\n"); + } + break; + case SAA7134_BOARD_ZOLID_HYBRID_PCI: + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &zolid_tda10048_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &zolid_tda18271_config); + } + break; + case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S: + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &dtv1000s_tda10048_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &dtv1000s_tda18271_config); + } + break; + case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: + /* Switch to digital mode */ + saa7134_tuner_callback(dev, 0, + TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); + fe0->dvb.frontend = dvb_attach(mb86a20s_attach, + &kworld_mb86a20s_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &kworld_tda18271_config); + } + + /* mb86a20s need to use the I2C gateway */ + break; + case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &prohdtv_pro2_lgs8g75_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &prohdtv_pro2_tda18271_config); + } + break; + case SAA7134_BOARD_AVERMEDIA_A706: + /* Enable all DVB-S devices now */ + /* CE5039 DVB-S tuner SLEEP pin low */ + saa7134_set_gpio(dev, 23, 0); + /* CE6313 DVB-S demod SLEEP pin low */ + saa7134_set_gpio(dev, 9, 0); + /* CE6313 DVB-S demod RESET# pin high */ + saa7134_set_gpio(dev, 25, 1); + msleep(1); + fe0->dvb.frontend = dvb_attach(mt312_attach, + &zl10313_avermedia_a706_config, &dev->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (dvb_attach(zl10039_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap) == NULL) + wprintk("%s: No zl10039 found!\n", + __func__); + } + break; + default: + wprintk("Huh? unknown DVB card?\n"); + break; + } + + if (attach_xc3028) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_adap, + .i2c_addr = 0x61, + }; + + if (!fe0->dvb.frontend) + goto detach_frontend; + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc3028 attach failed\n", + dev->name); + goto detach_frontend; + } + } + + if (NULL == fe0->dvb.frontend) { + printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); + goto detach_frontend; + } + /* define general-purpose callback pointer */ + fe0->dvb.frontend->callback = saa7134_tuner_callback; + + /* register everything else */ + ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, + &dev->pci->dev, adapter_nr, 0); + + /* this sequence is necessary to make the tda1004x load its firmware + * and to enter analog mode of hybrid boards + */ + if (!ret) { + if (fe0->dvb.frontend->ops.init) + fe0->dvb.frontend->ops.init(fe0->dvb.frontend); + if (fe0->dvb.frontend->ops.sleep) + fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend); + if (fe0->dvb.frontend->ops.tuner_ops.sleep) + fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend); + } + return ret; + +detach_frontend: + videobuf_dvb_dealloc_frontends(&dev->frontends); + return -EINVAL; +} + +static int dvb_fini(struct saa7134_dev *dev) +{ + struct videobuf_dvb_frontend *fe0; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + /* FIXME: I suspect that this code is bogus, since the entry for + Pinnacle 300I DVB-T PAL already defines the proper init to allow + the detection of mt2032 (TDA9887_PORT2_INACTIVE) + */ + if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) { + struct v4l2_priv_tun_config tda9887_cfg; + static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &on; + + /* otherwise we don't detect the tuner on next insmod */ + saa_call_all(dev, tuner, s_config, &tda9887_cfg); + } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { + if ((dev->eedata[2] == 0x07) && use_frontend) { + /* turn off the 2nd lnb supply */ + u8 data = 0x80; + struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; + struct dvb_frontend *fe; + fe = fe0->dvb.frontend; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &msg, 1); + fe->ops.i2c_gate_ctrl(fe, 0); + } + } + } + videobuf_dvb_unregister_bus(&dev->frontends); + return 0; +} + +static struct saa7134_mpeg_ops dvb_ops = { + .type = SAA7134_MPEG_DVB, + .init = dvb_init, + .fini = dvb_fini, +}; + +static int __init dvb_register(void) +{ + return saa7134_ts_register(&dvb_ops); +} + +static void __exit dvb_unregister(void) +{ + saa7134_ts_unregister(&dvb_ops); +} + +module_init(dvb_register); +module_exit(dvb_unregister); + +/* ------------------------------------------------------------------ */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134-empress.c b/drivers/media/pci/saa7134/saa7134-empress.c new file mode 100644 index 00000000..66a70814 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-empress.c @@ -0,0 +1,590 @@ +/* + * + * (c) 2004 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" + +#include +#include +#include + +/* ------------------------------------------------------------------ */ + +MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); +MODULE_LICENSE("GPL"); + +static unsigned int empress_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; + +module_param_array(empress_nr, int, NULL, 0444); +MODULE_PARM_DESC(empress_nr,"ts device number"); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"enable debug messages"); + +#define dprintk(fmt, arg...) if (debug) \ + printk(KERN_DEBUG "%s/empress: " fmt, dev->name , ## arg) + +/* ------------------------------------------------------------------ */ + +static void ts_reset_encoder(struct saa7134_dev* dev) +{ + if (!dev->empress_started) + return; + + saa_writeb(SAA7134_SPECIAL_MODE, 0x00); + msleep(10); + saa_writeb(SAA7134_SPECIAL_MODE, 0x01); + msleep(100); + dev->empress_started = 0; +} + +static int ts_init_encoder(struct saa7134_dev* dev) +{ + u32 leading_null_bytes = 0; + + /* If more cards start to need this, then this + should probably be added to the card definitions. */ + switch (dev->board) { + case SAA7134_BOARD_BEHOLD_M6: + case SAA7134_BOARD_BEHOLD_M63: + case SAA7134_BOARD_BEHOLD_M6_EXTRA: + leading_null_bytes = 1; + break; + } + ts_reset_encoder(dev); + saa_call_all(dev, core, init, leading_null_bytes); + dev->empress_started = 1; + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int ts_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct saa7134_dev *dev = video_drvdata(file); + int err; + + dprintk("open dev=%s\n", video_device_node_name(vdev)); + err = -EBUSY; + if (!mutex_trylock(&dev->empress_tsq.vb_lock)) + return err; + if (atomic_read(&dev->empress_users)) + goto done; + + /* Unmute audio */ + saa_writeb(SAA7134_AUDIO_MUTE_CTRL, + saa_readb(SAA7134_AUDIO_MUTE_CTRL) & ~(1 << 6)); + + atomic_inc(&dev->empress_users); + file->private_data = dev; + err = 0; + +done: + mutex_unlock(&dev->empress_tsq.vb_lock); + return err; +} + +static int ts_release(struct file *file) +{ + struct saa7134_dev *dev = file->private_data; + + videobuf_stop(&dev->empress_tsq); + videobuf_mmap_free(&dev->empress_tsq); + + /* stop the encoder */ + ts_reset_encoder(dev); + + /* Mute audio */ + saa_writeb(SAA7134_AUDIO_MUTE_CTRL, + saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6)); + + atomic_dec(&dev->empress_users); + + return 0; +} + +static ssize_t +ts_read(struct file *file, char __user *data, size_t count, loff_t *ppos) +{ + struct saa7134_dev *dev = file->private_data; + + if (!dev->empress_started) + ts_init_encoder(dev); + + return videobuf_read_stream(&dev->empress_tsq, + data, count, ppos, 0, + file->f_flags & O_NONBLOCK); +} + +static unsigned int +ts_poll(struct file *file, struct poll_table_struct *wait) +{ + struct saa7134_dev *dev = file->private_data; + + return videobuf_poll_stream(file, &dev->empress_tsq, wait); +} + + +static int +ts_mmap(struct file *file, struct vm_area_struct * vma) +{ + struct saa7134_dev *dev = file->private_data; + + return videobuf_mmap_mapper(&dev->empress_tsq, vma); +} + +/* + * This function is _not_ called directly, but from + * video_generic_ioctl (and maybe others). userspace + * copying is done already, arg is a kernel pointer. + */ + +static int empress_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct saa7134_dev *dev = file->private_data; + + strcpy(cap->driver, "saa7134"); + strlcpy(cap->card, saa7134_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING; + return 0; +} + +static int empress_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; + + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, "CCIR656"); + + return 0; +} + +static int empress_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int empress_s_input(struct file *file, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + + return 0; +} + +static int empress_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index != 0) + return -EINVAL; + + strlcpy(f->description, "MPEG TS", sizeof(f->description)); + f->pixelformat = V4L2_PIX_FMT_MPEG; + + return 0; +} + +static int empress_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_dev *dev = file->private_data; + struct v4l2_mbus_framefmt mbus_fmt; + + saa_call_all(dev, video, g_mbus_fmt, &mbus_fmt); + + v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; + + return 0; +} + +static int empress_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_dev *dev = file->private_data; + struct v4l2_mbus_framefmt mbus_fmt; + + v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED); + saa_call_all(dev, video, s_mbus_fmt, &mbus_fmt); + v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; + + return 0; +} + +static int empress_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_dev *dev = file->private_data; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; + + return 0; +} + +static int empress_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct saa7134_dev *dev = file->private_data; + + return videobuf_reqbufs(&dev->empress_tsq, p); +} + +static int empress_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct saa7134_dev *dev = file->private_data; + + return videobuf_querybuf(&dev->empress_tsq, b); +} + +static int empress_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_dev *dev = file->private_data; + + return videobuf_qbuf(&dev->empress_tsq, b); +} + +static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_dev *dev = file->private_data; + + return videobuf_dqbuf(&dev->empress_tsq, b, + file->f_flags & O_NONBLOCK); +} + +static int empress_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct saa7134_dev *dev = file->private_data; + + return videobuf_streamon(&dev->empress_tsq); +} + +static int empress_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct saa7134_dev *dev = file->private_data; + + return videobuf_streamoff(&dev->empress_tsq); +} + +static int empress_s_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + struct saa7134_dev *dev = file->private_data; + int err; + + /* count == 0 is abused in saa6752hs.c, so that special + case is handled here explicitly. */ + if (ctrls->count == 0) + return 0; + + if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + + err = saa_call_empress(dev, core, s_ext_ctrls, ctrls); + ts_init_encoder(dev); + + return err; +} + +static int empress_g_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + struct saa7134_dev *dev = file->private_data; + + if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + return saa_call_empress(dev, core, g_ext_ctrls, ctrls); +} + +static int empress_g_ctrl(struct file *file, void *priv, + struct v4l2_control *c) +{ + struct saa7134_dev *dev = file->private_data; + + return saa7134_g_ctrl_internal(dev, NULL, c); +} + +static int empress_s_ctrl(struct file *file, void *priv, + struct v4l2_control *c) +{ + struct saa7134_dev *dev = file->private_data; + + return saa7134_s_ctrl_internal(dev, NULL, c); +} + +static int empress_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + /* Must be sorted from low to high control ID! */ + static const u32 user_ctrls[] = { + V4L2_CID_USER_CLASS, + V4L2_CID_BRIGHTNESS, + V4L2_CID_CONTRAST, + V4L2_CID_SATURATION, + V4L2_CID_HUE, + V4L2_CID_AUDIO_VOLUME, + V4L2_CID_AUDIO_MUTE, + V4L2_CID_HFLIP, + 0 + }; + + /* Must be sorted from low to high control ID! */ + static const u32 mpeg_ctrls[] = { + V4L2_CID_MPEG_CLASS, + V4L2_CID_MPEG_STREAM_TYPE, + V4L2_CID_MPEG_STREAM_PID_PMT, + V4L2_CID_MPEG_STREAM_PID_AUDIO, + V4L2_CID_MPEG_STREAM_PID_VIDEO, + V4L2_CID_MPEG_STREAM_PID_PCR, + V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, + V4L2_CID_MPEG_AUDIO_ENCODING, + V4L2_CID_MPEG_AUDIO_L2_BITRATE, + V4L2_CID_MPEG_VIDEO_ENCODING, + V4L2_CID_MPEG_VIDEO_ASPECT, + V4L2_CID_MPEG_VIDEO_BITRATE_MODE, + V4L2_CID_MPEG_VIDEO_BITRATE, + V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, + 0 + }; + static const u32 *ctrl_classes[] = { + user_ctrls, + mpeg_ctrls, + NULL + }; + struct saa7134_dev *dev = file->private_data; + + c->id = v4l2_ctrl_next(ctrl_classes, c->id); + if (c->id == 0) + return -EINVAL; + if (c->id == V4L2_CID_USER_CLASS || c->id == V4L2_CID_MPEG_CLASS) + return v4l2_ctrl_query_fill(c, 0, 0, 0, 0); + if (V4L2_CTRL_ID2CLASS(c->id) != V4L2_CTRL_CLASS_MPEG) + return saa7134_queryctrl(file, priv, c); + return saa_call_empress(dev, core, queryctrl, c); +} + +static int empress_querymenu(struct file *file, void *priv, + struct v4l2_querymenu *c) +{ + struct saa7134_dev *dev = file->private_data; + + if (V4L2_CTRL_ID2CLASS(c->id) != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + return saa_call_empress(dev, core, querymenu, c); +} + +static int empress_g_chip_ident(struct file *file, void *fh, + struct v4l2_dbg_chip_ident *chip) +{ + struct saa7134_dev *dev = file->private_data; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type == V4L2_CHIP_MATCH_I2C_DRIVER && + !strcmp(chip->match.name, "saa6752hs")) + return saa_call_empress(dev, core, g_chip_ident, chip); + if (chip->match.type == V4L2_CHIP_MATCH_I2C_ADDR) + return saa_call_empress(dev, core, g_chip_ident, chip); + return -EINVAL; +} + +static int empress_s_std(struct file *file, void *priv, v4l2_std_id id) +{ + struct saa7134_dev *dev = file->private_data; + + return saa7134_s_std_internal(dev, NULL, id); +} + +static int empress_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_dev *dev = file->private_data; + + *id = dev->tvnorm->id; + return 0; +} + +static const struct v4l2_file_operations ts_fops = +{ + .owner = THIS_MODULE, + .open = ts_open, + .release = ts_release, + .read = ts_read, + .poll = ts_poll, + .mmap = ts_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops ts_ioctl_ops = { + .vidioc_querycap = empress_querycap, + .vidioc_enum_fmt_vid_cap = empress_enum_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = empress_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = empress_s_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = empress_g_fmt_vid_cap, + .vidioc_reqbufs = empress_reqbufs, + .vidioc_querybuf = empress_querybuf, + .vidioc_qbuf = empress_qbuf, + .vidioc_dqbuf = empress_dqbuf, + .vidioc_streamon = empress_streamon, + .vidioc_streamoff = empress_streamoff, + .vidioc_s_ext_ctrls = empress_s_ext_ctrls, + .vidioc_g_ext_ctrls = empress_g_ext_ctrls, + .vidioc_enum_input = empress_enum_input, + .vidioc_g_input = empress_g_input, + .vidioc_s_input = empress_s_input, + .vidioc_queryctrl = empress_queryctrl, + .vidioc_querymenu = empress_querymenu, + .vidioc_g_ctrl = empress_g_ctrl, + .vidioc_s_ctrl = empress_s_ctrl, + .vidioc_g_chip_ident = empress_g_chip_ident, + .vidioc_s_std = empress_s_std, + .vidioc_g_std = empress_g_std, +}; + +/* ----------------------------------------------------------- */ + +static struct video_device saa7134_empress_template = { + .name = "saa7134-empress", + .fops = &ts_fops, + .ioctl_ops = &ts_ioctl_ops, + + .tvnorms = SAA7134_NORMS, + .current_norm = V4L2_STD_PAL, +}; + +static void empress_signal_update(struct work_struct *work) +{ + struct saa7134_dev* dev = + container_of(work, struct saa7134_dev, empress_workqueue); + + if (dev->nosignal) { + dprintk("no video signal\n"); + } else { + dprintk("video signal acquired\n"); + } +} + +static void empress_signal_change(struct saa7134_dev *dev) +{ + schedule_work(&dev->empress_workqueue); +} + + +static int empress_init(struct saa7134_dev *dev) +{ + int err; + + dprintk("%s: %s\n",dev->name,__func__); + dev->empress_dev = video_device_alloc(); + if (NULL == dev->empress_dev) + return -ENOMEM; + *(dev->empress_dev) = saa7134_empress_template; + dev->empress_dev->parent = &dev->pci->dev; + dev->empress_dev->release = video_device_release; + snprintf(dev->empress_dev->name, sizeof(dev->empress_dev->name), + "%s empress (%s)", dev->name, + saa7134_boards[dev->board].name); + + INIT_WORK(&dev->empress_workqueue, empress_signal_update); + + video_set_drvdata(dev->empress_dev, dev); + err = video_register_device(dev->empress_dev,VFL_TYPE_GRABBER, + empress_nr[dev->nr]); + if (err < 0) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); + video_device_release(dev->empress_dev); + dev->empress_dev = NULL; + return err; + } + printk(KERN_INFO "%s: registered device %s [mpeg]\n", + dev->name, video_device_node_name(dev->empress_dev)); + + videobuf_queue_sg_init(&dev->empress_tsq, &saa7134_ts_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_ALTERNATE, + sizeof(struct saa7134_buf), + dev, NULL); + + empress_signal_update(&dev->empress_workqueue); + return 0; +} + +static int empress_fini(struct saa7134_dev *dev) +{ + dprintk("%s: %s\n",dev->name,__func__); + + if (NULL == dev->empress_dev) + return 0; + flush_work(&dev->empress_workqueue); + video_unregister_device(dev->empress_dev); + dev->empress_dev = NULL; + return 0; +} + +static struct saa7134_mpeg_ops empress_ops = { + .type = SAA7134_MPEG_EMPRESS, + .init = empress_init, + .fini = empress_fini, + .signal_change = empress_signal_change, +}; + +static int __init empress_register(void) +{ + return saa7134_ts_register(&empress_ops); +} + +static void __exit empress_unregister(void) +{ + saa7134_ts_unregister(&empress_ops); +} + +module_init(empress_register); +module_exit(empress_unregister); + +/* ----------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c new file mode 100644 index 00000000..c68169d7 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-i2c.c @@ -0,0 +1,436 @@ +/* + * + * device driver for philips saa7134 based TV cards + * i2c interface support + * + * (c) 2001,02 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" +#include + +/* ----------------------------------------------------------- */ + +static unsigned int i2c_debug; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]"); + +static unsigned int i2c_scan; +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); + +#define d1printk if (1 == i2c_debug) printk +#define d2printk if (2 == i2c_debug) printk + +#define I2C_WAIT_DELAY 32 +#define I2C_WAIT_RETRY 16 + +/* ----------------------------------------------------------- */ + +static char *str_i2c_status[] = { + "IDLE", "DONE_STOP", "BUSY", "TO_SCL", "TO_ARB", "DONE_WRITE", + "DONE_READ", "DONE_WRITE_TO", "DONE_READ_TO", "NO_DEVICE", + "NO_ACKN", "BUS_ERR", "ARB_LOST", "SEQ_ERR", "ST_ERR", "SW_ERR" +}; + +enum i2c_status { + IDLE = 0, // no I2C command pending + DONE_STOP = 1, // I2C command done and STOP executed + BUSY = 2, // executing I2C command + TO_SCL = 3, // executing I2C command, time out on clock stretching + TO_ARB = 4, // time out on arbitration trial, still trying + DONE_WRITE = 5, // I2C command done and awaiting next write command + DONE_READ = 6, // I2C command done and awaiting next read command + DONE_WRITE_TO = 7, // see 5, and time out on status echo + DONE_READ_TO = 8, // see 6, and time out on status echo + NO_DEVICE = 9, // no acknowledge on device slave address + NO_ACKN = 10, // no acknowledge after data byte transfer + BUS_ERR = 11, // bus error + ARB_LOST = 12, // arbitration lost during transfer + SEQ_ERR = 13, // erroneous programming sequence + ST_ERR = 14, // wrong status echoing + SW_ERR = 15 // software error +}; + +static char *str_i2c_attr[] = { + "NOP", "STOP", "CONTINUE", "START" +}; + +enum i2c_attr { + NOP = 0, // no operation on I2C bus + STOP = 1, // stop condition, no associated byte transfer + CONTINUE = 2, // continue with byte transfer + START = 3 // start condition with byte transfer +}; + +static inline enum i2c_status i2c_get_status(struct saa7134_dev *dev) +{ + enum i2c_status status; + + status = saa_readb(SAA7134_I2C_ATTR_STATUS) & 0x0f; + d2printk(KERN_DEBUG "%s: i2c stat <= %s\n",dev->name, + str_i2c_status[status]); + return status; +} + +static inline void i2c_set_status(struct saa7134_dev *dev, + enum i2c_status status) +{ + d2printk(KERN_DEBUG "%s: i2c stat => %s\n",dev->name, + str_i2c_status[status]); + saa_andorb(SAA7134_I2C_ATTR_STATUS,0x0f,status); +} + +static inline void i2c_set_attr(struct saa7134_dev *dev, enum i2c_attr attr) +{ + d2printk(KERN_DEBUG "%s: i2c attr => %s\n",dev->name, + str_i2c_attr[attr]); + saa_andorb(SAA7134_I2C_ATTR_STATUS,0xc0,attr << 6); +} + +static inline int i2c_is_error(enum i2c_status status) +{ + switch (status) { + case NO_DEVICE: + case NO_ACKN: + case BUS_ERR: + case ARB_LOST: + case SEQ_ERR: + case ST_ERR: + return true; + default: + return false; + } +} + +static inline int i2c_is_idle(enum i2c_status status) +{ + switch (status) { + case IDLE: + case DONE_STOP: + return true; + default: + return false; + } +} + +static inline int i2c_is_busy(enum i2c_status status) +{ + switch (status) { + case BUSY: + case TO_SCL: + case TO_ARB: + return true; + default: + return false; + } +} + +static int i2c_is_busy_wait(struct saa7134_dev *dev) +{ + enum i2c_status status; + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + status = i2c_get_status(dev); + if (!i2c_is_busy(status)) + break; + saa_wait(I2C_WAIT_DELAY); + } + if (I2C_WAIT_RETRY == count) + return false; + return true; +} + +static int i2c_reset(struct saa7134_dev *dev) +{ + enum i2c_status status; + int count; + + d2printk(KERN_DEBUG "%s: i2c reset\n",dev->name); + status = i2c_get_status(dev); + if (!i2c_is_error(status)) + return true; + i2c_set_status(dev,status); + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + status = i2c_get_status(dev); + if (!i2c_is_error(status)) + break; + udelay(I2C_WAIT_DELAY); + } + if (I2C_WAIT_RETRY == count) + return false; + + if (!i2c_is_idle(status)) + return false; + + i2c_set_attr(dev,NOP); + return true; +} + +static inline int i2c_send_byte(struct saa7134_dev *dev, + enum i2c_attr attr, + unsigned char data) +{ + enum i2c_status status; + __u32 dword; + + /* have to write both attr + data in one 32bit word */ + dword = saa_readl(SAA7134_I2C_ATTR_STATUS >> 2); + dword &= 0x0f; + dword |= (attr << 6); + dword |= ((__u32)data << 8); + dword |= 0x00 << 16; /* 100 kHz */ +// dword |= 0x40 << 16; /* 400 kHz */ + dword |= 0xf0 << 24; + saa_writel(SAA7134_I2C_ATTR_STATUS >> 2, dword); + d2printk(KERN_DEBUG "%s: i2c data => 0x%x\n",dev->name,data); + + if (!i2c_is_busy_wait(dev)) + return -EIO; + status = i2c_get_status(dev); + if (i2c_is_error(status)) + return -EIO; + return 0; +} + +static inline int i2c_recv_byte(struct saa7134_dev *dev) +{ + enum i2c_status status; + unsigned char data; + + i2c_set_attr(dev,CONTINUE); + if (!i2c_is_busy_wait(dev)) + return -EIO; + status = i2c_get_status(dev); + if (i2c_is_error(status)) + return -EIO; + data = saa_readb(SAA7134_I2C_DATA); + d2printk(KERN_DEBUG "%s: i2c data <= 0x%x\n",dev->name,data); + return data; +} + +static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg *msgs, int num) +{ + struct saa7134_dev *dev = i2c_adap->algo_data; + enum i2c_status status; + unsigned char data; + int addr,rc,i,byte; + + status = i2c_get_status(dev); + if (!i2c_is_idle(status)) + if (!i2c_reset(dev)) + return -EIO; + + d2printk("start xfer\n"); + d1printk(KERN_DEBUG "%s: i2c xfer:",dev->name); + for (i = 0; i < num; i++) { + if (!(msgs[i].flags & I2C_M_NOSTART) || 0 == i) { + /* send address */ + d2printk("send address\n"); + addr = msgs[i].addr << 1; + if (msgs[i].flags & I2C_M_RD) + addr |= 1; + if (i > 0 && msgs[i].flags & + I2C_M_RD && msgs[i].addr != 0x40 && + msgs[i].addr != 0x41 && + msgs[i].addr != 0x19) { + /* workaround for a saa7134 i2c bug + * needed to talk to the mt352 demux + * thanks to pinnacle for the hint */ + int quirk = 0xfe; + d1printk(" [%02x quirk]",quirk); + i2c_send_byte(dev,START,quirk); + i2c_recv_byte(dev); + } + d1printk(" < %02x", addr); + rc = i2c_send_byte(dev,START,addr); + if (rc < 0) + goto err; + } + if (msgs[i].flags & I2C_M_RD) { + /* read bytes */ + d2printk("read bytes\n"); + for (byte = 0; byte < msgs[i].len; byte++) { + d1printk(" ="); + rc = i2c_recv_byte(dev); + if (rc < 0) + goto err; + d1printk("%02x", rc); + msgs[i].buf[byte] = rc; + } + /* discard mysterious extra byte when reading + from Samsung S5H1411. i2c bus gets error + if we do not. */ + if (0x19 == msgs[i].addr) { + d1printk(" ?"); + rc = i2c_recv_byte(dev); + if (rc < 0) + goto err; + d1printk("%02x", rc); + } + } else { + /* write bytes */ + d2printk("write bytes\n"); + for (byte = 0; byte < msgs[i].len; byte++) { + data = msgs[i].buf[byte]; + d1printk(" %02x", data); + rc = i2c_send_byte(dev,CONTINUE,data); + if (rc < 0) + goto err; + } + } + } + d2printk("xfer done\n"); + d1printk(" >"); + i2c_set_attr(dev,STOP); + rc = -EIO; + if (!i2c_is_busy_wait(dev)) + goto err; + status = i2c_get_status(dev); + if (i2c_is_error(status)) + goto err; + /* ensure that the bus is idle for at least one bit slot */ + msleep(1); + + d1printk("\n"); + return num; + err: + if (1 == i2c_debug) { + status = i2c_get_status(dev); + printk(" ERROR: %s\n",str_i2c_status[status]); + } + return rc; +} + +/* ----------------------------------------------------------- */ + +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm saa7134_algo = { + .master_xfer = saa7134_i2c_xfer, + .functionality = functionality, +}; + +static struct i2c_adapter saa7134_adap_template = { + .owner = THIS_MODULE, + .name = "saa7134", + .algo = &saa7134_algo, +}; + +static struct i2c_client saa7134_client_template = { + .name = "saa7134 internal", +}; + +/* ----------------------------------------------------------- */ + +static int +saa7134_i2c_eeprom(struct saa7134_dev *dev, unsigned char *eedata, int len) +{ + unsigned char buf; + int i,err; + + dev->i2c_client.addr = 0xa0 >> 1; + buf = 0; + if (1 != (err = i2c_master_send(&dev->i2c_client,&buf,1))) { + printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", + dev->name,err); + return -1; + } + if (len != (err = i2c_master_recv(&dev->i2c_client,eedata,len))) { + printk(KERN_WARNING "%s: i2c eeprom read error (err=%d)\n", + dev->name,err); + return -1; + } + for (i = 0; i < len; i++) { + if (0 == (i % 16)) + printk(KERN_INFO "%s: i2c eeprom %02x:",dev->name,i); + printk(" %02x",eedata[i]); + if (15 == (i % 16)) + printk("\n"); + } + return 0; +} + +static char *i2c_devs[128] = { + [ 0x20 ] = "mpeg encoder (saa6752hs)", + [ 0xa0 >> 1 ] = "eeprom", + [ 0xc0 >> 1 ] = "tuner (analog)", + [ 0x86 >> 1 ] = "tda9887", + [ 0x5a >> 1 ] = "remote control", +}; + +static void do_i2c_scan(char *name, struct i2c_client *c) +{ + unsigned char buf; + int i,rc; + + for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) { + c->addr = i; + rc = i2c_master_recv(c,&buf,0); + if (rc < 0) + continue; + printk("%s: i2c scan: found device @ 0x%x [%s]\n", + name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); + } +} + +int saa7134_i2c_register(struct saa7134_dev *dev) +{ + dev->i2c_adap = saa7134_adap_template; + dev->i2c_adap.dev.parent = &dev->pci->dev; + strcpy(dev->i2c_adap.name,dev->name); + dev->i2c_adap.algo_data = dev; + i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev); + i2c_add_adapter(&dev->i2c_adap); + + dev->i2c_client = saa7134_client_template; + dev->i2c_client.adapter = &dev->i2c_adap; + + saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata)); + if (i2c_scan) + do_i2c_scan(dev->name,&dev->i2c_client); + + /* Instantiate the IR receiver device, if present */ + saa7134_probe_i2c_ir(dev); + return 0; +} + +int saa7134_i2c_unregister(struct saa7134_dev *dev) +{ + i2c_del_adapter(&dev->i2c_adap); + return 0; +} + +/* ----------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134-input.c b/drivers/media/pci/saa7134/saa7134-input.c new file mode 100644 index 00000000..6f431266 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-input.c @@ -0,0 +1,1044 @@ +/* + * + * handle saa7134 IR remotes via linux kernel input layer. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" + +#define MODULE_NAME "saa7134" + +static unsigned int disable_ir; +module_param(disable_ir, int, 0444); +MODULE_PARM_DESC(disable_ir,"disable infrared remote support"); + +static unsigned int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); + +static int pinnacle_remote; +module_param(pinnacle_remote, int, 0644); /* Choose Pinnacle PCTV remote */ +MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)"); + +#define dprintk(fmt, arg...) if (ir_debug) \ + printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg) +#define i2cdprintk(fmt, arg...) if (ir_debug) \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg) + +/* Helper function for raw decoding at GPIO16 or GPIO18 */ +static int saa7134_raw_decode_irq(struct saa7134_dev *dev); + +/* -------------------- GPIO generic keycode builder -------------------- */ + +static int build_key(struct saa7134_dev *dev) +{ + struct saa7134_card_ir *ir = dev->remote; + u32 gpio, data; + + /* here comes the additional handshake steps for some cards */ + switch (dev->board) { + case SAA7134_BOARD_GOTVIEW_7135: + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x80); + saa_clearb(SAA7134_GPIO_GPSTATUS1, 0x80); + break; + } + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + saa_clearb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + if (ir->polling) { + if (ir->last_gpio == gpio) + return 0; + ir->last_gpio = gpio; + } + + data = ir_extract_bits(gpio, ir->mask_keycode); + dprintk("build_key gpio=0x%x mask=0x%x data=%d\n", + gpio, ir->mask_keycode, data); + + switch (dev->board) { + case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: + if (data == ir->mask_keycode) + rc_keyup(ir->dev); + else + rc_keydown_notimeout(ir->dev, data, 0); + return 0; + } + + if (ir->polling) { + if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || + (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { + rc_keydown_notimeout(ir->dev, data, 0); + } else { + rc_keyup(ir->dev); + } + } + else { /* IRQ driven mode - handle key press and release in one go */ + if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || + (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { + rc_keydown_notimeout(ir->dev, data, 0); + rc_keyup(ir->dev); + } + } + + return 0; +} + +/* --------------------- Chip specific I2C key builders ----------------- */ + +static int get_key_flydvb_trio(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + int gpio; + int attempt = 0; + unsigned char b; + + /* We need this to access GPI Used by the saa_readl macro. */ + struct saa7134_dev *dev = ir->c->adapter->algo_data; + + if (dev == NULL) { + i2cdprintk("get_key_flydvb_trio: " + "ir->c->adapter->algo_data is NULL!\n"); + return -EIO; + } + + /* rising SAA7134_GPIGPRESCAN reads the status */ + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + if (0x40000 & ~gpio) + return 0; /* No button press */ + + /* No button press - only before first key pressed */ + if (b == 0xFF) + return 0; + + /* poll IR chip */ + /* weak up the IR chip */ + b = 0; + + while (1 != i2c_master_send(ir->c, &b, 1)) { + if ((attempt++) < 10) { + /* + * wait a bit for next attempt - + * I don't know how make it better + */ + msleep(10); + continue; + } + i2cdprintk("send wake up byte to pic16C505 (IR chip)" + "failed %dx\n", attempt); + return -EIO; + } + if (1 != i2c_master_recv(ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + *ir_key = b; + *ir_raw = b; + return 1; +} + +static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char b; + int gpio; + + /* is needed to access GPIO. Used by the saa_readl macro. */ + struct saa7134_dev *dev = ir->c->adapter->algo_data; + if (dev == NULL) { + i2cdprintk("get_key_msi_tvanywhere_plus: " + "ir->c->adapter->algo_data is NULL!\n"); + return -EIO; + } + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + /* GPIO&0x40 is pulsed low when a button is pressed. Don't do + I2C receive if gpio&0x40 is not low. */ + + if (gpio & 0x40) + return 0; /* No button press */ + + /* GPIO says there is a button press. Get it. */ + + if (1 != i2c_master_recv(ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* No button press */ + + if (b == 0xff) + return 0; + + /* Button pressed */ + + dprintk("get_key_msi_tvanywhere_plus: Key = 0x%02X\n", b); + *ir_key = b; + *ir_raw = b; + return 1; +} + +/* copied and modified from get_key_msi_tvanywhere_plus() */ +static int get_key_kworld_pc150u(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char b; + unsigned int gpio; + + /* is needed to access GPIO. Used by the saa_readl macro. */ + struct saa7134_dev *dev = ir->c->adapter->algo_data; + if (dev == NULL) { + i2cdprintk("get_key_kworld_pc150u: " + "ir->c->adapter->algo_data is NULL!\n"); + return -EIO; + } + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + /* GPIO&0x100 is pulsed low when a button is pressed. Don't do + I2C receive if gpio&0x100 is not low. */ + + if (gpio & 0x100) + return 0; /* No button press */ + + /* GPIO says there is a button press. Get it. */ + + if (1 != i2c_master_recv(ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* No button press */ + + if (b == 0xff) + return 0; + + /* Button pressed */ + + dprintk("get_key_kworld_pc150u: Key = 0x%02X\n", b); + *ir_key = b; + *ir_raw = b; + return 1; +} + +static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* no button press */ + if (b==0) + return 0; + + /* repeating */ + if (b & 0x80) + return 1; + + *ir_key = b; + *ir_raw = b; + return 1; +} + +static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char buf[5]; + + /* poll IR chip */ + if (5 != i2c_master_recv(ir->c, buf, 5)) + return -EIO; + + /* Check if some key were pressed */ + if (!(buf[0] & 0x80)) + return 0; + + /* + * buf[3] & 0x80 is always high. + * buf[3] & 0x40 is a parity bit. A repeat event is marked + * by preserving it into two separate readings + * buf[4] bits 0 and 1, and buf[1] and buf[2] are always + * zero. + */ + *ir_key = 0x1fff & ((buf[3] << 8) | (buf[4] >> 2)); + *ir_raw = *ir_key; + return 1; +} + + +static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char data[12]; + u32 gpio; + + struct saa7134_dev *dev = ir->c->adapter->algo_data; + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + if (0x400000 & ~gpio) + return 0; /* No button press */ + + ir->c->addr = 0x5a >> 1; + + if (12 != i2c_master_recv(ir->c, data, 12)) { + i2cdprintk("read error\n"); + return -EIO; + } + + if (data[9] != (unsigned char)(~data[8])) + return 0; + + *ir_raw = ((data[10] << 16) | (data[11] << 8) | (data[9] << 0)); + *ir_key = *ir_raw; + + return 1; +} + +/* Common (grey or coloured) pinnacle PCTV remote handling + * + */ +static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, + int parity_offset, int marker, int code_modulo) +{ + unsigned char b[4]; + unsigned int start = 0,parity = 0,code = 0; + + /* poll IR chip */ + if (4 != i2c_master_recv(ir->c, b, 4)) { + i2cdprintk("read error\n"); + return -EIO; + } + + for (start = 0; start < ARRAY_SIZE(b); start++) { + if (b[start] == marker) { + code=b[(start+parity_offset + 1) % 4]; + parity=b[(start+parity_offset) % 4]; + } + } + + /* Empty Request */ + if (parity == 0) + return 0; + + /* Repeating... */ + if (ir->old == parity) + return 0; + + ir->old = parity; + + /* drop special codes when a key is held down a long time for the grey controller + In this case, the second bit of the code is asserted */ + if (marker == 0xfe && (code & 0x40)) + return 0; + + code %= code_modulo; + + *ir_raw = code; + *ir_key = code; + + i2cdprintk("Pinnacle PCTV key %02x\n", code); + + return 1; +} + +/* The grey pinnacle PCTV remote + * + * There are one issue with this remote: + * - I2c packet does not change when the same key is pressed quickly. The workaround + * is to hold down each key for about half a second, so that another code is generated + * in the i2c packet, and the function can distinguish key presses. + * + * Sylvain Pasche + */ +static int get_key_pinnacle_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + + return get_key_pinnacle(ir, ir_key, ir_raw, 1, 0xfe, 0xff); +} + + +/* The new pinnacle PCTV remote (with the colored buttons) + * + * Ricardo Cerqueira + */ +static int get_key_pinnacle_color(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + /* code_modulo parameter (0x88) is used to reduce code value to fit inside IR_KEYTAB_SIZE + * + * this is the only value that results in 42 unique + * codes < 128 + */ + + return get_key_pinnacle(ir, ir_key, ir_raw, 2, 0x80, 0x88); +} + +void saa7134_input_irq(struct saa7134_dev *dev) +{ + struct saa7134_card_ir *ir; + + if (!dev || !dev->remote) + return; + + ir = dev->remote; + if (!ir->running) + return; + + if (!ir->polling && !ir->raw_decode) { + build_key(dev); + } else if (ir->raw_decode) { + saa7134_raw_decode_irq(dev); + } +} + +static void saa7134_input_timer(unsigned long data) +{ + struct saa7134_dev *dev = (struct saa7134_dev *)data; + struct saa7134_card_ir *ir = dev->remote; + + build_key(dev); + mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling)); +} + +static void ir_raw_decode_timer_end(unsigned long data) +{ + struct saa7134_dev *dev = (struct saa7134_dev *)data; + + ir_raw_event_handle(dev->remote->dev); +} + +static int __saa7134_ir_start(void *priv) +{ + struct saa7134_dev *dev = priv; + struct saa7134_card_ir *ir; + + if (!dev || !dev->remote) + return -EINVAL; + + ir = dev->remote; + if (ir->running) + return 0; + + /* Moved here from saa7134_input_init1() because the latter + * is not called on device resume */ + switch (dev->board) { + case SAA7134_BOARD_MD2819: + case SAA7134_BOARD_KWORLD_VSTREAM_XPERT: + case SAA7134_BOARD_AVERMEDIA_305: + case SAA7134_BOARD_AVERMEDIA_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_305: + case SAA7134_BOARD_AVERMEDIA_STUDIO_505: + case SAA7134_BOARD_AVERMEDIA_STUDIO_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA: + case SAA7134_BOARD_AVERMEDIA_GO_007_FM: + case SAA7134_BOARD_AVERMEDIA_M102: + case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS: + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE0, 0x4); + saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); + break; + case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_A16AR: + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; + case SAA7134_BOARD_GOTVIEW_7135: + saa_setb(SAA7134_GPIO_GPMODE1, 0x80); + break; + } + + ir->running = true; + + if (ir->polling) { + setup_timer(&ir->timer, saa7134_input_timer, + (unsigned long)dev); + ir->timer.expires = jiffies + HZ; + add_timer(&ir->timer); + } else if (ir->raw_decode) { + /* set timer_end for code completion */ + setup_timer(&ir->timer, ir_raw_decode_timer_end, + (unsigned long)dev); + } + + return 0; +} + +static void __saa7134_ir_stop(void *priv) +{ + struct saa7134_dev *dev = priv; + struct saa7134_card_ir *ir; + + if (!dev || !dev->remote) + return; + + ir = dev->remote; + if (!ir->running) + return; + + if (ir->polling || ir->raw_decode) + del_timer_sync(&ir->timer); + + ir->running = false; + + return; +} + +int saa7134_ir_start(struct saa7134_dev *dev) +{ + if (dev->remote->users) + return __saa7134_ir_start(dev); + + return 0; +} + +void saa7134_ir_stop(struct saa7134_dev *dev) +{ + if (dev->remote->users) + __saa7134_ir_stop(dev); +} + +static int saa7134_ir_open(struct rc_dev *rc) +{ + struct saa7134_dev *dev = rc->priv; + + dev->remote->users++; + return __saa7134_ir_start(dev); +} + +static void saa7134_ir_close(struct rc_dev *rc) +{ + struct saa7134_dev *dev = rc->priv; + + dev->remote->users--; + if (!dev->remote->users) + __saa7134_ir_stop(dev); +} + +int saa7134_input_init1(struct saa7134_dev *dev) +{ + struct saa7134_card_ir *ir; + struct rc_dev *rc; + char *ir_codes = NULL; + u32 mask_keycode = 0; + u32 mask_keydown = 0; + u32 mask_keyup = 0; + unsigned polling = 0; + bool raw_decode = false; + int err; + + if (dev->has_remote != SAA7134_REMOTE_GPIO) + return -ENODEV; + if (disable_ir) + return -ENODEV; + + /* detect & configure */ + switch (dev->board) { + case SAA7134_BOARD_FLYVIDEO2000: + case SAA7134_BOARD_FLYVIDEO3000: + case SAA7134_BOARD_FLYTVPLATINUM_FM: + case SAA7134_BOARD_FLYTVPLATINUM_MINI2: + case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM: + ir_codes = RC_MAP_FLYVIDEO; + mask_keycode = 0xEC00000; + mask_keydown = 0x0040000; + break; + case SAA7134_BOARD_CINERGY400: + case SAA7134_BOARD_CINERGY600: + case SAA7134_BOARD_CINERGY600_MK3: + ir_codes = RC_MAP_CINERGY; + mask_keycode = 0x00003f; + mask_keyup = 0x040000; + break; + case SAA7134_BOARD_ECS_TVP3XP: + case SAA7134_BOARD_ECS_TVP3XP_4CB5: + ir_codes = RC_MAP_EZTV; + mask_keycode = 0x00017c; + mask_keyup = 0x000002; + polling = 50; // ms + break; + case SAA7134_BOARD_KWORLD_XPERT: + case SAA7134_BOARD_AVACSSMARTTV: + ir_codes = RC_MAP_PIXELVIEW; + mask_keycode = 0x00001F; + mask_keyup = 0x000020; + polling = 50; // ms + break; + case SAA7134_BOARD_MD2819: + case SAA7134_BOARD_KWORLD_VSTREAM_XPERT: + case SAA7134_BOARD_AVERMEDIA_305: + case SAA7134_BOARD_AVERMEDIA_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_305: + case SAA7134_BOARD_AVERMEDIA_STUDIO_505: + case SAA7134_BOARD_AVERMEDIA_STUDIO_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA: + case SAA7134_BOARD_AVERMEDIA_GO_007_FM: + case SAA7134_BOARD_AVERMEDIA_M102: + case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS: + ir_codes = RC_MAP_AVERMEDIA; + mask_keycode = 0x0007C8; + mask_keydown = 0x000010; + polling = 50; // ms + /* GPIO stuff moved to __saa7134_ir_start() */ + break; + case SAA7134_BOARD_AVERMEDIA_M135A: + ir_codes = RC_MAP_AVERMEDIA_M135A; + mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ + mask_keyup = 0x0040000; + mask_keycode = 0xffff; + raw_decode = true; + break; + case SAA7134_BOARD_AVERMEDIA_M733A: + ir_codes = RC_MAP_AVERMEDIA_M733A_RM_K6; + mask_keydown = 0x0040000; + mask_keyup = 0x0040000; + mask_keycode = 0xffff; + raw_decode = true; + break; + case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_A16AR: + ir_codes = RC_MAP_AVERMEDIA; + mask_keycode = 0x02F200; + mask_keydown = 0x000400; + polling = 50; // ms + /* GPIO stuff moved to __saa7134_ir_start() */ + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + ir_codes = RC_MAP_AVERMEDIA_A16D; + mask_keycode = 0x02F200; + mask_keydown = 0x000400; + polling = 50; /* ms */ + /* GPIO stuff moved to __saa7134_ir_start() */ + break; + case SAA7134_BOARD_KWORLD_TERMINATOR: + ir_codes = RC_MAP_PIXELVIEW; + mask_keycode = 0x00001f; + mask_keyup = 0x000060; + polling = 50; // ms + break; + case SAA7134_BOARD_MANLI_MTV001: + case SAA7134_BOARD_MANLI_MTV002: + ir_codes = RC_MAP_MANLI; + mask_keycode = 0x001f00; + mask_keyup = 0x004000; + polling = 50; /* ms */ + break; + case SAA7134_BOARD_BEHOLD_409FM: + case SAA7134_BOARD_BEHOLD_401: + case SAA7134_BOARD_BEHOLD_403: + case SAA7134_BOARD_BEHOLD_403FM: + case SAA7134_BOARD_BEHOLD_405: + case SAA7134_BOARD_BEHOLD_405FM: + case SAA7134_BOARD_BEHOLD_407: + case SAA7134_BOARD_BEHOLD_407FM: + case SAA7134_BOARD_BEHOLD_409: + case SAA7134_BOARD_BEHOLD_505FM: + case SAA7134_BOARD_BEHOLD_505RDS_MK5: + case SAA7134_BOARD_BEHOLD_505RDS_MK3: + case SAA7134_BOARD_BEHOLD_507_9FM: + case SAA7134_BOARD_BEHOLD_507RDS_MK3: + case SAA7134_BOARD_BEHOLD_507RDS_MK5: + ir_codes = RC_MAP_MANLI; + mask_keycode = 0x003f00; + mask_keyup = 0x004000; + polling = 50; /* ms */ + break; + case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: + ir_codes = RC_MAP_BEHOLD_COLUMBUS; + mask_keycode = 0x003f00; + mask_keyup = 0x004000; + polling = 50; // ms + break; + case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS: + ir_codes = RC_MAP_PCTV_SEDNA; + mask_keycode = 0x001f00; + mask_keyup = 0x004000; + polling = 50; // ms + break; + case SAA7134_BOARD_GOTVIEW_7135: + ir_codes = RC_MAP_GOTVIEW7135; + mask_keycode = 0x0003CC; + mask_keydown = 0x000010; + polling = 5; /* ms */ + /* GPIO stuff moved to __saa7134_ir_start() */ + break; + case SAA7134_BOARD_VIDEOMATE_TV_PVR: + case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: + case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII: + ir_codes = RC_MAP_VIDEOMATE_TV_PVR; + mask_keycode = 0x00003F; + mask_keyup = 0x400000; + polling = 50; // ms + break; + case SAA7134_BOARD_PROTEUS_2309: + ir_codes = RC_MAP_PROTEUS_2309; + mask_keycode = 0x00007F; + mask_keyup = 0x000080; + polling = 50; // ms + break; + case SAA7134_BOARD_VIDEOMATE_DVBT_300: + case SAA7134_BOARD_VIDEOMATE_DVBT_200: + ir_codes = RC_MAP_VIDEOMATE_TV_PVR; + mask_keycode = 0x003F00; + mask_keyup = 0x040000; + break; + case SAA7134_BOARD_FLYDVBS_LR300: + case SAA7134_BOARD_FLYDVBT_LR301: + case SAA7134_BOARD_FLYDVBTDUO: + ir_codes = RC_MAP_FLYDVB; + mask_keycode = 0x0001F00; + mask_keydown = 0x0040000; + break; + case SAA7134_BOARD_ASUSTeK_P7131_DUAL: + case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: + case SAA7134_BOARD_ASUSTeK_P7131_ANALOG: + ir_codes = RC_MAP_ASUS_PC39; + mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ + mask_keyup = 0x0040000; + mask_keycode = 0xffff; + raw_decode = true; + break; + case SAA7134_BOARD_ASUSTeK_PS3_100: + ir_codes = RC_MAP_ASUS_PS3_100; + mask_keydown = 0x0040000; + mask_keyup = 0x0040000; + mask_keycode = 0xffff; + raw_decode = true; + break; + case SAA7134_BOARD_ENCORE_ENLTV: + case SAA7134_BOARD_ENCORE_ENLTV_FM: + ir_codes = RC_MAP_ENCORE_ENLTV; + mask_keycode = 0x00007f; + mask_keyup = 0x040000; + polling = 50; // ms + break; + case SAA7134_BOARD_ENCORE_ENLTV_FM53: + case SAA7134_BOARD_ENCORE_ENLTV_FM3: + ir_codes = RC_MAP_ENCORE_ENLTV_FM53; + mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ + mask_keyup = 0x0040000; + mask_keycode = 0xffff; + raw_decode = true; + break; + case SAA7134_BOARD_10MOONSTVMASTER3: + ir_codes = RC_MAP_ENCORE_ENLTV; + mask_keycode = 0x5f80000; + mask_keyup = 0x8000000; + polling = 50; //ms + break; + case SAA7134_BOARD_GENIUS_TVGO_A11MCE: + ir_codes = RC_MAP_GENIUS_TVGO_A11MCE; + mask_keycode = 0xff; + mask_keydown = 0xf00000; + polling = 50; /* ms */ + break; + case SAA7134_BOARD_REAL_ANGEL_220: + ir_codes = RC_MAP_REAL_AUDIO_220_32_KEYS; + mask_keycode = 0x3f00; + mask_keyup = 0x4000; + polling = 50; /* ms */ + break; + case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: + ir_codes = RC_MAP_KWORLD_PLUS_TV_ANALOG; + mask_keycode = 0x7f; + polling = 40; /* ms */ + break; + case SAA7134_BOARD_VIDEOMATE_S350: + ir_codes = RC_MAP_VIDEOMATE_S350; + mask_keycode = 0x003f00; + mask_keydown = 0x040000; + break; + case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S: + ir_codes = RC_MAP_WINFAST; + mask_keycode = 0x5f00; + mask_keyup = 0x020000; + polling = 50; /* ms */ + break; + case SAA7134_BOARD_VIDEOMATE_M1F: + ir_codes = RC_MAP_VIDEOMATE_K100; + mask_keycode = 0x0ff00; + mask_keyup = 0x040000; + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1150: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: + ir_codes = RC_MAP_HAUPPAUGE; + mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ + mask_keyup = 0x0040000; + mask_keycode = 0xffff; + raw_decode = true; + break; + } + if (NULL == ir_codes) { + printk("%s: Oops: IR config error [card=%d]\n", + dev->name, dev->board); + return -ENODEV; + } + + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + rc = rc_allocate_device(); + if (!ir || !rc) { + err = -ENOMEM; + goto err_out_free; + } + + ir->dev = rc; + dev->remote = ir; + + /* init hardware-specific stuff */ + ir->mask_keycode = mask_keycode; + ir->mask_keydown = mask_keydown; + ir->mask_keyup = mask_keyup; + ir->polling = polling; + ir->raw_decode = raw_decode; + + /* init input device */ + snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)", + saa7134_boards[dev->board].name); + snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", + pci_name(dev->pci)); + + rc->priv = dev; + rc->open = saa7134_ir_open; + rc->close = saa7134_ir_close; + if (raw_decode) + rc->driver_type = RC_DRIVER_IR_RAW; + + rc->input_name = ir->name; + rc->input_phys = ir->phys; + rc->input_id.bustype = BUS_PCI; + rc->input_id.version = 1; + if (dev->pci->subsystem_vendor) { + rc->input_id.vendor = dev->pci->subsystem_vendor; + rc->input_id.product = dev->pci->subsystem_device; + } else { + rc->input_id.vendor = dev->pci->vendor; + rc->input_id.product = dev->pci->device; + } + rc->dev.parent = &dev->pci->dev; + rc->map_name = ir_codes; + rc->driver_name = MODULE_NAME; + + err = rc_register_device(rc); + if (err) + goto err_out_free; + + return 0; + +err_out_free: + rc_free_device(rc); + dev->remote = NULL; + kfree(ir); + return err; +} + +void saa7134_input_fini(struct saa7134_dev *dev) +{ + if (NULL == dev->remote) + return; + + saa7134_ir_stop(dev); + rc_unregister_device(dev->remote->dev); + kfree(dev->remote); + dev->remote = NULL; +} + +void saa7134_probe_i2c_ir(struct saa7134_dev *dev) +{ + struct i2c_board_info info; + struct i2c_msg msg_msi = { + .addr = 0x50, + .flags = I2C_M_RD, + .len = 0, + .buf = NULL, + }; + int rc; + + if (disable_ir) { + dprintk("IR has been disabled, not probing for i2c remote\n"); + return; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&dev->init_data, 0, sizeof(dev->init_data)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + + switch (dev->board) { + case SAA7134_BOARD_PINNACLE_PCTV_110i: + case SAA7134_BOARD_PINNACLE_PCTV_310i: + dev->init_data.name = "Pinnacle PCTV"; + if (pinnacle_remote == 0) { + dev->init_data.get_key = get_key_pinnacle_color; + dev->init_data.ir_codes = RC_MAP_PINNACLE_COLOR; + info.addr = 0x47; + } else { + dev->init_data.get_key = get_key_pinnacle_grey; + dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY; + info.addr = 0x47; + } + break; + case SAA7134_BOARD_UPMOST_PURPLE_TV: + dev->init_data.name = "Purple TV"; + dev->init_data.get_key = get_key_purpletv; + dev->init_data.ir_codes = RC_MAP_PURPLETV; + info.addr = 0x7a; + break; + case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: + dev->init_data.name = "MSI TV@nywhere Plus"; + dev->init_data.get_key = get_key_msi_tvanywhere_plus; + dev->init_data.ir_codes = RC_MAP_MSI_TVANYWHERE_PLUS; + /* + * MSI TV@nyware Plus requires more frequent polling + * otherwise it will miss some keypresses + */ + dev->init_data.polling_interval = 50; + info.addr = 0x30; + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... + REVISIT: might no longer be needed */ + rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); + dprintk("probe 0x%02x @ %s: %s\n", + msg_msi.addr, dev->i2c_adap.name, + (1 == rc) ? "yes" : "no"); + break; + case SAA7134_BOARD_KWORLD_PC150U: + /* copied and modified from MSI TV@nywhere Plus */ + dev->init_data.name = "Kworld PC150-U"; + dev->init_data.get_key = get_key_kworld_pc150u; + dev->init_data.ir_codes = RC_MAP_KWORLD_PC150U; + info.addr = 0x30; + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... + REVISIT: might no longer be needed */ + rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); + dprintk("probe 0x%02x @ %s: %s\n", + msg_msi.addr, dev->i2c_adap.name, + (1 == rc) ? "yes" : "no"); + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1110: + dev->init_data.name = "HVR 1110"; + dev->init_data.get_key = get_key_hvr1110; + dev->init_data.ir_codes = RC_MAP_HAUPPAUGE; + info.addr = 0x71; + break; + case SAA7134_BOARD_BEHOLD_607FM_MK3: + case SAA7134_BOARD_BEHOLD_607FM_MK5: + case SAA7134_BOARD_BEHOLD_609FM_MK3: + case SAA7134_BOARD_BEHOLD_609FM_MK5: + case SAA7134_BOARD_BEHOLD_607RDS_MK3: + case SAA7134_BOARD_BEHOLD_607RDS_MK5: + case SAA7134_BOARD_BEHOLD_609RDS_MK3: + case SAA7134_BOARD_BEHOLD_609RDS_MK5: + case SAA7134_BOARD_BEHOLD_M6: + case SAA7134_BOARD_BEHOLD_M63: + case SAA7134_BOARD_BEHOLD_M6_EXTRA: + case SAA7134_BOARD_BEHOLD_H6: + case SAA7134_BOARD_BEHOLD_X7: + case SAA7134_BOARD_BEHOLD_H7: + case SAA7134_BOARD_BEHOLD_A7: + dev->init_data.name = "BeholdTV"; + dev->init_data.get_key = get_key_beholdm6xx; + dev->init_data.ir_codes = RC_MAP_BEHOLD; + dev->init_data.type = RC_BIT_NEC; + info.addr = 0x2d; + break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_501: + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + info.addr = 0x40; + break; + case SAA7134_BOARD_AVERMEDIA_A706: + info.addr = 0x41; + break; + case SAA7134_BOARD_FLYDVB_TRIO: + dev->init_data.name = "FlyDVB Trio"; + dev->init_data.get_key = get_key_flydvb_trio; + dev->init_data.ir_codes = RC_MAP_FLYDVB; + info.addr = 0x0b; + break; + default: + dprintk("No I2C IR support for board %x\n", dev->board); + return; + } + + if (dev->init_data.name) + info.platform_data = &dev->init_data; + i2c_new_device(&dev->i2c_adap, &info); +} + +static int saa7134_raw_decode_irq(struct saa7134_dev *dev) +{ + struct saa7134_card_ir *ir = dev->remote; + unsigned long timeout; + int space; + + /* Generate initial event */ + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + space = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown; + ir_raw_event_store_edge(dev->remote->dev, space ? IR_SPACE : IR_PULSE); + + /* + * Wait 15 ms from the start of the first IR event before processing + * the event. This time is enough for NEC protocol. May need adjustments + * to work with other protocols. + */ + smp_mb(); + + if (!timer_pending(&ir->timer)) { + timeout = jiffies + msecs_to_jiffies(15); + mod_timer(&ir->timer, timeout); + } + + return 1; +} diff --git a/drivers/media/pci/saa7134/saa7134-reg.h b/drivers/media/pci/saa7134/saa7134-reg.h new file mode 100644 index 00000000..e7e0af10 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-reg.h @@ -0,0 +1,378 @@ +/* + * + * philips saa7134 registers + */ + +/* ------------------------------------------------------------------ */ +/* + * PCI ID's + */ +#ifndef PCI_DEVICE_ID_PHILIPS_SAA7130 +# define PCI_DEVICE_ID_PHILIPS_SAA7130 0x7130 +#endif +#ifndef PCI_DEVICE_ID_PHILIPS_SAA7133 +# define PCI_DEVICE_ID_PHILIPS_SAA7133 0x7133 +#endif +#ifndef PCI_DEVICE_ID_PHILIPS_SAA7134 +# define PCI_DEVICE_ID_PHILIPS_SAA7134 0x7134 +#endif +#ifndef PCI_DEVICE_ID_PHILIPS_SAA7135 +# define PCI_DEVICE_ID_PHILIPS_SAA7135 0x7135 +#endif + +/* ------------------------------------------------------------------ */ +/* + * registers -- 32 bit + */ + +/* DMA channels, n = 0 ... 6 */ +#define SAA7134_RS_BA1(n) ((0x200 >> 2) + 4*n) +#define SAA7134_RS_BA2(n) ((0x204 >> 2) + 4*n) +#define SAA7134_RS_PITCH(n) ((0x208 >> 2) + 4*n) +#define SAA7134_RS_CONTROL(n) ((0x20c >> 2) + 4*n) +#define SAA7134_RS_CONTROL_WSWAP (0x01 << 25) +#define SAA7134_RS_CONTROL_BSWAP (0x01 << 24) +#define SAA7134_RS_CONTROL_BURST_2 (0x01 << 21) +#define SAA7134_RS_CONTROL_BURST_4 (0x02 << 21) +#define SAA7134_RS_CONTROL_BURST_8 (0x03 << 21) +#define SAA7134_RS_CONTROL_BURST_16 (0x04 << 21) +#define SAA7134_RS_CONTROL_BURST_32 (0x05 << 21) +#define SAA7134_RS_CONTROL_BURST_64 (0x06 << 21) +#define SAA7134_RS_CONTROL_BURST_MAX (0x07 << 21) +#define SAA7134_RS_CONTROL_ME (0x01 << 20) +#define SAA7134_FIFO_SIZE (0x2a0 >> 2) +#define SAA7134_THRESHOULD (0x2a4 >> 2) + +#define SAA7133_NUM_SAMPLES (0x588 >> 2) +#define SAA7133_AUDIO_CHANNEL (0x58c >> 2) +#define SAA7133_AUDIO_FORMAT (0x58f >> 2) +#define SAA7133_DIGITAL_OUTPUT_SEL1 (0x46c >> 2) +#define SAA7133_DIGITAL_OUTPUT_SEL2 (0x470 >> 2) +#define SAA7133_DIGITAL_INPUT_XBAR1 (0x464 >> 2) +#define SAA7133_ANALOG_IO_SELECT (0x594 >> 2) + +/* main control */ +#define SAA7134_MAIN_CTRL (0x2a8 >> 2) +#define SAA7134_MAIN_CTRL_VPLLE (1 << 15) +#define SAA7134_MAIN_CTRL_APLLE (1 << 14) +#define SAA7134_MAIN_CTRL_EXOSC (1 << 13) +#define SAA7134_MAIN_CTRL_EVFE1 (1 << 12) +#define SAA7134_MAIN_CTRL_EVFE2 (1 << 11) +#define SAA7134_MAIN_CTRL_ESFE (1 << 10) +#define SAA7134_MAIN_CTRL_EBADC (1 << 9) +#define SAA7134_MAIN_CTRL_EBDAC (1 << 8) +#define SAA7134_MAIN_CTRL_TE6 (1 << 6) +#define SAA7134_MAIN_CTRL_TE5 (1 << 5) +#define SAA7134_MAIN_CTRL_TE4 (1 << 4) +#define SAA7134_MAIN_CTRL_TE3 (1 << 3) +#define SAA7134_MAIN_CTRL_TE2 (1 << 2) +#define SAA7134_MAIN_CTRL_TE1 (1 << 1) +#define SAA7134_MAIN_CTRL_TE0 (1 << 0) + +/* DMA status */ +#define SAA7134_DMA_STATUS (0x2ac >> 2) + +/* audio / video status */ +#define SAA7134_AV_STATUS (0x2c0 >> 2) +#define SAA7134_AV_STATUS_STEREO (1 << 17) +#define SAA7134_AV_STATUS_DUAL (1 << 16) +#define SAA7134_AV_STATUS_PILOT (1 << 15) +#define SAA7134_AV_STATUS_SMB (1 << 14) +#define SAA7134_AV_STATUS_DMB (1 << 13) +#define SAA7134_AV_STATUS_VDSP (1 << 12) +#define SAA7134_AV_STATUS_IIC_STATUS (3 << 10) +#define SAA7134_AV_STATUS_MVM (7 << 7) +#define SAA7134_AV_STATUS_FIDT (1 << 6) +#define SAA7134_AV_STATUS_INTL (1 << 5) +#define SAA7134_AV_STATUS_RDCAP (1 << 4) +#define SAA7134_AV_STATUS_PWR_ON (1 << 3) +#define SAA7134_AV_STATUS_LOAD_ERR (1 << 2) +#define SAA7134_AV_STATUS_TRIG_ERR (1 << 1) +#define SAA7134_AV_STATUS_CONF_ERR (1 << 0) + +/* interrupt */ +#define SAA7134_IRQ1 (0x2c4 >> 2) +#define SAA7134_IRQ1_INTE_RA3_1 (1 << 25) +#define SAA7134_IRQ1_INTE_RA3_0 (1 << 24) +#define SAA7134_IRQ1_INTE_RA2_3 (1 << 19) +#define SAA7134_IRQ1_INTE_RA2_2 (1 << 18) +#define SAA7134_IRQ1_INTE_RA2_1 (1 << 17) +#define SAA7134_IRQ1_INTE_RA2_0 (1 << 16) +#define SAA7134_IRQ1_INTE_RA1_3 (1 << 11) +#define SAA7134_IRQ1_INTE_RA1_2 (1 << 10) +#define SAA7134_IRQ1_INTE_RA1_1 (1 << 9) +#define SAA7134_IRQ1_INTE_RA1_0 (1 << 8) +#define SAA7134_IRQ1_INTE_RA0_7 (1 << 7) +#define SAA7134_IRQ1_INTE_RA0_6 (1 << 6) +#define SAA7134_IRQ1_INTE_RA0_5 (1 << 5) +#define SAA7134_IRQ1_INTE_RA0_4 (1 << 4) +#define SAA7134_IRQ1_INTE_RA0_3 (1 << 3) +#define SAA7134_IRQ1_INTE_RA0_2 (1 << 2) +#define SAA7134_IRQ1_INTE_RA0_1 (1 << 1) +#define SAA7134_IRQ1_INTE_RA0_0 (1 << 0) + +#define SAA7134_IRQ2 (0x2c8 >> 2) +#define SAA7134_IRQ2_INTE_GPIO23_N (1 << 17) /* negative edge */ +#define SAA7134_IRQ2_INTE_GPIO23_P (1 << 16) /* positive edge */ +#define SAA7134_IRQ2_INTE_GPIO22_N (1 << 15) /* negative edge */ +#define SAA7134_IRQ2_INTE_GPIO22_P (1 << 14) /* positive edge */ +#define SAA7134_IRQ2_INTE_GPIO18_N (1 << 13) /* negative edge */ +#define SAA7134_IRQ2_INTE_GPIO18_P (1 << 12) /* positive edge */ +#define SAA7134_IRQ2_INTE_GPIO16_N (1 << 11) /* negative edge */ +#define SAA7134_IRQ2_INTE_GPIO16_P (1 << 10) /* positive edge */ +#define SAA7134_IRQ2_INTE_SC2 (1 << 9) +#define SAA7134_IRQ2_INTE_SC1 (1 << 8) +#define SAA7134_IRQ2_INTE_SC0 (1 << 7) +#define SAA7134_IRQ2_INTE_DEC4 (1 << 6) +#define SAA7134_IRQ2_INTE_DEC3 (1 << 5) +#define SAA7134_IRQ2_INTE_DEC2 (1 << 4) +#define SAA7134_IRQ2_INTE_DEC1 (1 << 3) +#define SAA7134_IRQ2_INTE_DEC0 (1 << 2) +#define SAA7134_IRQ2_INTE_PE (1 << 1) +#define SAA7134_IRQ2_INTE_AR (1 << 0) + +#define SAA7134_IRQ_REPORT (0x2cc >> 2) +#define SAA7134_IRQ_REPORT_GPIO23 (1 << 17) +#define SAA7134_IRQ_REPORT_GPIO22 (1 << 16) +#define SAA7134_IRQ_REPORT_GPIO18 (1 << 15) +#define SAA7134_IRQ_REPORT_GPIO16 (1 << 14) +#define SAA7134_IRQ_REPORT_LOAD_ERR (1 << 13) +#define SAA7134_IRQ_REPORT_CONF_ERR (1 << 12) +#define SAA7134_IRQ_REPORT_TRIG_ERR (1 << 11) +#define SAA7134_IRQ_REPORT_MMC (1 << 10) +#define SAA7134_IRQ_REPORT_FIDT (1 << 9) +#define SAA7134_IRQ_REPORT_INTL (1 << 8) +#define SAA7134_IRQ_REPORT_RDCAP (1 << 7) +#define SAA7134_IRQ_REPORT_PWR_ON (1 << 6) +#define SAA7134_IRQ_REPORT_PE (1 << 5) +#define SAA7134_IRQ_REPORT_AR (1 << 4) +#define SAA7134_IRQ_REPORT_DONE_RA3 (1 << 3) +#define SAA7134_IRQ_REPORT_DONE_RA2 (1 << 2) +#define SAA7134_IRQ_REPORT_DONE_RA1 (1 << 1) +#define SAA7134_IRQ_REPORT_DONE_RA0 (1 << 0) +#define SAA7134_IRQ_STATUS (0x2d0 >> 2) + + +/* ------------------------------------------------------------------ */ +/* + * registers -- 8 bit + */ + +/* video decoder */ +#define SAA7134_INCR_DELAY 0x101 +#define SAA7134_ANALOG_IN_CTRL1 0x102 +#define SAA7134_ANALOG_IN_CTRL2 0x103 +#define SAA7134_ANALOG_IN_CTRL3 0x104 +#define SAA7134_ANALOG_IN_CTRL4 0x105 +#define SAA7134_HSYNC_START 0x106 +#define SAA7134_HSYNC_STOP 0x107 +#define SAA7134_SYNC_CTRL 0x108 +#define SAA7134_LUMA_CTRL 0x109 +#define SAA7134_DEC_LUMA_BRIGHT 0x10a +#define SAA7134_DEC_LUMA_CONTRAST 0x10b +#define SAA7134_DEC_CHROMA_SATURATION 0x10c +#define SAA7134_DEC_CHROMA_HUE 0x10d +#define SAA7134_CHROMA_CTRL1 0x10e +#define SAA7134_CHROMA_GAIN 0x10f +#define SAA7134_CHROMA_CTRL2 0x110 +#define SAA7134_MODE_DELAY_CTRL 0x111 + +#define SAA7134_ANALOG_ADC 0x114 +#define SAA7134_VGATE_START 0x115 +#define SAA7134_VGATE_STOP 0x116 +#define SAA7134_MISC_VGATE_MSB 0x117 +#define SAA7134_RAW_DATA_GAIN 0x118 +#define SAA7134_RAW_DATA_OFFSET 0x119 +#define SAA7134_STATUS_VIDEO1 0x11e +#define SAA7134_STATUS_VIDEO2 0x11f + +/* video scaler */ +#define SAA7134_SOURCE_TIMING1 0x000 +#define SAA7134_SOURCE_TIMING2 0x001 +#define SAA7134_REGION_ENABLE 0x004 +#define SAA7134_SCALER_STATUS0 0x006 +#define SAA7134_SCALER_STATUS1 0x007 +#define SAA7134_START_GREEN 0x00c +#define SAA7134_START_BLUE 0x00d +#define SAA7134_START_RED 0x00e +#define SAA7134_GREEN_PATH(x) (0x010 +x) +#define SAA7134_BLUE_PATH(x) (0x020 +x) +#define SAA7134_RED_PATH(x) (0x030 +x) + +#define TASK_A 0x040 +#define TASK_B 0x080 +#define SAA7134_TASK_CONDITIONS(t) (0x000 +t) +#define SAA7134_FIELD_HANDLING(t) (0x001 +t) +#define SAA7134_DATA_PATH(t) (0x002 +t) +#define SAA7134_VBI_H_START1(t) (0x004 +t) +#define SAA7134_VBI_H_START2(t) (0x005 +t) +#define SAA7134_VBI_H_STOP1(t) (0x006 +t) +#define SAA7134_VBI_H_STOP2(t) (0x007 +t) +#define SAA7134_VBI_V_START1(t) (0x008 +t) +#define SAA7134_VBI_V_START2(t) (0x009 +t) +#define SAA7134_VBI_V_STOP1(t) (0x00a +t) +#define SAA7134_VBI_V_STOP2(t) (0x00b +t) +#define SAA7134_VBI_H_LEN1(t) (0x00c +t) +#define SAA7134_VBI_H_LEN2(t) (0x00d +t) +#define SAA7134_VBI_V_LEN1(t) (0x00e +t) +#define SAA7134_VBI_V_LEN2(t) (0x00f +t) + +#define SAA7134_VIDEO_H_START1(t) (0x014 +t) +#define SAA7134_VIDEO_H_START2(t) (0x015 +t) +#define SAA7134_VIDEO_H_STOP1(t) (0x016 +t) +#define SAA7134_VIDEO_H_STOP2(t) (0x017 +t) +#define SAA7134_VIDEO_V_START1(t) (0x018 +t) +#define SAA7134_VIDEO_V_START2(t) (0x019 +t) +#define SAA7134_VIDEO_V_STOP1(t) (0x01a +t) +#define SAA7134_VIDEO_V_STOP2(t) (0x01b +t) +#define SAA7134_VIDEO_PIXELS1(t) (0x01c +t) +#define SAA7134_VIDEO_PIXELS2(t) (0x01d +t) +#define SAA7134_VIDEO_LINES1(t) (0x01e +t) +#define SAA7134_VIDEO_LINES2(t) (0x01f +t) + +#define SAA7134_H_PRESCALE(t) (0x020 +t) +#define SAA7134_ACC_LENGTH(t) (0x021 +t) +#define SAA7134_LEVEL_CTRL(t) (0x022 +t) +#define SAA7134_FIR_PREFILTER_CTRL(t) (0x023 +t) +#define SAA7134_LUMA_BRIGHT(t) (0x024 +t) +#define SAA7134_LUMA_CONTRAST(t) (0x025 +t) +#define SAA7134_CHROMA_SATURATION(t) (0x026 +t) +#define SAA7134_VBI_H_SCALE_INC1(t) (0x028 +t) +#define SAA7134_VBI_H_SCALE_INC2(t) (0x029 +t) +#define SAA7134_VBI_PHASE_OFFSET_LUMA(t) (0x02a +t) +#define SAA7134_VBI_PHASE_OFFSET_CHROMA(t) (0x02b +t) +#define SAA7134_H_SCALE_INC1(t) (0x02c +t) +#define SAA7134_H_SCALE_INC2(t) (0x02d +t) +#define SAA7134_H_PHASE_OFF_LUMA(t) (0x02e +t) +#define SAA7134_H_PHASE_OFF_CHROMA(t) (0x02f +t) +#define SAA7134_V_SCALE_RATIO1(t) (0x030 +t) +#define SAA7134_V_SCALE_RATIO2(t) (0x031 +t) +#define SAA7134_V_FILTER(t) (0x032 +t) +#define SAA7134_V_PHASE_OFFSET0(t) (0x034 +t) +#define SAA7134_V_PHASE_OFFSET1(t) (0x035 +t) +#define SAA7134_V_PHASE_OFFSET2(t) (0x036 +t) +#define SAA7134_V_PHASE_OFFSET3(t) (0x037 +t) + +/* clipping & dma */ +#define SAA7134_OFMT_VIDEO_A 0x300 +#define SAA7134_OFMT_DATA_A 0x301 +#define SAA7134_OFMT_VIDEO_B 0x302 +#define SAA7134_OFMT_DATA_B 0x303 +#define SAA7134_ALPHA_NOCLIP 0x304 +#define SAA7134_ALPHA_CLIP 0x305 +#define SAA7134_UV_PIXEL 0x308 +#define SAA7134_CLIP_RED 0x309 +#define SAA7134_CLIP_GREEN 0x30a +#define SAA7134_CLIP_BLUE 0x30b + +/* i2c bus */ +#define SAA7134_I2C_ATTR_STATUS 0x180 +#define SAA7134_I2C_DATA 0x181 +#define SAA7134_I2C_CLOCK_SELECT 0x182 +#define SAA7134_I2C_TIMER 0x183 + +/* audio */ +#define SAA7134_NICAM_ADD_DATA1 0x140 +#define SAA7134_NICAM_ADD_DATA2 0x141 +#define SAA7134_NICAM_STATUS 0x142 +#define SAA7134_AUDIO_STATUS 0x143 +#define SAA7134_NICAM_ERROR_COUNT 0x144 +#define SAA7134_IDENT_SIF 0x145 +#define SAA7134_LEVEL_READOUT1 0x146 +#define SAA7134_LEVEL_READOUT2 0x147 +#define SAA7134_NICAM_ERROR_LOW 0x148 +#define SAA7134_NICAM_ERROR_HIGH 0x149 +#define SAA7134_DCXO_IDENT_CTRL 0x14a +#define SAA7134_DEMODULATOR 0x14b +#define SAA7134_AGC_GAIN_SELECT 0x14c +#define SAA7134_CARRIER1_FREQ0 0x150 +#define SAA7134_CARRIER1_FREQ1 0x151 +#define SAA7134_CARRIER1_FREQ2 0x152 +#define SAA7134_CARRIER2_FREQ0 0x154 +#define SAA7134_CARRIER2_FREQ1 0x155 +#define SAA7134_CARRIER2_FREQ2 0x156 +#define SAA7134_NUM_SAMPLES0 0x158 +#define SAA7134_NUM_SAMPLES1 0x159 +#define SAA7134_NUM_SAMPLES2 0x15a +#define SAA7134_AUDIO_FORMAT_CTRL 0x15b +#define SAA7134_MONITOR_SELECT 0x160 +#define SAA7134_FM_DEEMPHASIS 0x161 +#define SAA7134_FM_DEMATRIX 0x162 +#define SAA7134_CHANNEL1_LEVEL 0x163 +#define SAA7134_CHANNEL2_LEVEL 0x164 +#define SAA7134_NICAM_CONFIG 0x165 +#define SAA7134_NICAM_LEVEL_ADJUST 0x166 +#define SAA7134_STEREO_DAC_OUTPUT_SELECT 0x167 +#define SAA7134_I2S_OUTPUT_FORMAT 0x168 +#define SAA7134_I2S_OUTPUT_SELECT 0x169 +#define SAA7134_I2S_OUTPUT_LEVEL 0x16a +#define SAA7134_DSP_OUTPUT_SELECT 0x16b +#define SAA7134_AUDIO_MUTE_CTRL 0x16c +#define SAA7134_SIF_SAMPLE_FREQ 0x16d +#define SAA7134_ANALOG_IO_SELECT 0x16e +#define SAA7134_AUDIO_CLOCK0 0x170 +#define SAA7134_AUDIO_CLOCK1 0x171 +#define SAA7134_AUDIO_CLOCK2 0x172 +#define SAA7134_AUDIO_PLL_CTRL 0x173 +#define SAA7134_AUDIO_CLOCKS_PER_FIELD0 0x174 +#define SAA7134_AUDIO_CLOCKS_PER_FIELD1 0x175 +#define SAA7134_AUDIO_CLOCKS_PER_FIELD2 0x176 + +/* video port output */ +#define SAA7134_VIDEO_PORT_CTRL0 0x190 +#define SAA7134_VIDEO_PORT_CTRL1 0x191 +#define SAA7134_VIDEO_PORT_CTRL2 0x192 +#define SAA7134_VIDEO_PORT_CTRL3 0x193 +#define SAA7134_VIDEO_PORT_CTRL4 0x194 +#define SAA7134_VIDEO_PORT_CTRL5 0x195 +#define SAA7134_VIDEO_PORT_CTRL6 0x196 +#define SAA7134_VIDEO_PORT_CTRL7 0x197 +#define SAA7134_VIDEO_PORT_CTRL8 0x198 + +/* transport stream interface */ +#define SAA7134_TS_PARALLEL 0x1a0 +#define SAA7134_TS_PARALLEL_SERIAL 0x1a1 +#define SAA7134_TS_SERIAL0 0x1a2 +#define SAA7134_TS_SERIAL1 0x1a3 +#define SAA7134_TS_DMA0 0x1a4 +#define SAA7134_TS_DMA1 0x1a5 +#define SAA7134_TS_DMA2 0x1a6 + +/* GPIO Controls */ +#define SAA7134_GPIO_GPRESCAN 0x80 +#define SAA7134_GPIO_27_25 0x0E + +#define SAA7134_GPIO_GPMODE0 0x1B0 +#define SAA7134_GPIO_GPMODE1 0x1B1 +#define SAA7134_GPIO_GPMODE2 0x1B2 +#define SAA7134_GPIO_GPMODE3 0x1B3 +#define SAA7134_GPIO_GPSTATUS0 0x1B4 +#define SAA7134_GPIO_GPSTATUS1 0x1B5 +#define SAA7134_GPIO_GPSTATUS2 0x1B6 +#define SAA7134_GPIO_GPSTATUS3 0x1B7 + +/* I2S output */ +#define SAA7134_I2S_AUDIO_OUTPUT 0x1c0 + +/* test modes */ +#define SAA7134_SPECIAL_MODE 0x1d0 +#define SAA7134_PRODUCTION_TEST_MODE 0x1d1 + +/* audio -- saa7133 + saa7135 only */ +#define SAA7135_DSP_RWSTATE 0x580 +#define SAA7135_DSP_RWSTATE_ERR (1 << 3) +#define SAA7135_DSP_RWSTATE_IDA (1 << 2) +#define SAA7135_DSP_RWSTATE_RDB (1 << 1) +#define SAA7135_DSP_RWSTATE_WRR (1 << 0) + +#define SAA7135_DSP_RWCLEAR 0x586 +#define SAA7135_DSP_RWCLEAR_RERR 1 + +#define SAA7133_I2S_AUDIO_CONTROL 0x591 +/* ------------------------------------------------------------------ */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ + diff --git a/drivers/media/pci/saa7134/saa7134-ts.c b/drivers/media/pci/saa7134/saa7134-ts.c new file mode 100644 index 00000000..2e3f4b41 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-ts.c @@ -0,0 +1,327 @@ +/* + * + * device driver for philips saa7134 based TV cards + * video4linux video interface + * + * (c) 2001,02 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" + +/* ------------------------------------------------------------------ */ + +static unsigned int ts_debug; +module_param(ts_debug, int, 0644); +MODULE_PARM_DESC(ts_debug,"enable debug messages [ts]"); + +#define dprintk(fmt, arg...) if (ts_debug) \ + printk(KERN_DEBUG "%s/ts: " fmt, dev->name , ## arg) + +/* ------------------------------------------------------------------ */ + +static int buffer_activate(struct saa7134_dev *dev, + struct saa7134_buf *buf, + struct saa7134_buf *next) +{ + + dprintk("buffer_activate [%p]",buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->top_seen = 0; + + if (NULL == next) + next = buf; + if (V4L2_FIELD_TOP == buf->vb.field) { + dprintk("- [top] buf=%p next=%p\n",buf,next); + saa_writel(SAA7134_RS_BA1(5),saa7134_buffer_base(buf)); + saa_writel(SAA7134_RS_BA2(5),saa7134_buffer_base(next)); + } else { + dprintk("- [bottom] buf=%p next=%p\n",buf,next); + saa_writel(SAA7134_RS_BA1(5),saa7134_buffer_base(next)); + saa_writel(SAA7134_RS_BA2(5),saa7134_buffer_base(buf)); + } + + /* start DMA */ + saa7134_set_dmabits(dev); + + mod_timer(&dev->ts_q.timeout, jiffies+TS_BUFFER_TIMEOUT); + + if (!dev->ts_started) + saa7134_ts_start(dev); + + return 0; +} + +static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct saa7134_dev *dev = q->priv_data; + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + unsigned int lines, llength, size; + int err; + + dprintk("buffer_prepare [%p,%s]\n",buf,v4l2_field_names[field]); + + llength = TS_PACKET_SIZE; + lines = dev->ts.nr_packets; + + size = lines * llength; + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (buf->vb.size != size) { + saa7134_dma_free(q,buf); + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + dprintk("buffer_prepare: needs_init\n"); + + buf->vb.width = llength; + buf->vb.height = lines; + buf->vb.size = size; + buf->pt = &dev->ts.pt_ts; + + err = videobuf_iolock(q,&buf->vb,NULL); + if (err) + goto oops; + err = saa7134_pgtable_build(dev->pci,buf->pt, + dma->sglist, + dma->sglen, + saa7134_buffer_startpage(buf)); + if (err) + goto oops; + } + + buf->vb.state = VIDEOBUF_PREPARED; + buf->activate = buffer_activate; + buf->vb.field = field; + return 0; + + oops: + saa7134_dma_free(q,buf); + return err; +} + +static int +buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + struct saa7134_dev *dev = q->priv_data; + + *size = TS_PACKET_SIZE * dev->ts.nr_packets; + if (0 == *count) + *count = dev->ts.nr_bufs; + *count = saa7134_buffer_count(*size,*count); + + return 0; +} + +static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct saa7134_dev *dev = q->priv_data; + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + + saa7134_buffer_queue(dev,&dev->ts_q,buf); +} + +static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + struct saa7134_dev *dev = q->priv_data; + + if (dev->ts_started) + saa7134_ts_stop(dev); + + saa7134_dma_free(q,buf); +} + +struct videobuf_queue_ops saa7134_ts_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; +EXPORT_SYMBOL_GPL(saa7134_ts_qops); + +/* ----------------------------------------------------------- */ +/* exported stuff */ + +static unsigned int tsbufs = 8; +module_param(tsbufs, int, 0444); +MODULE_PARM_DESC(tsbufs, "number of ts buffers for read/write IO, range 2-32"); + +static unsigned int ts_nr_packets = 64; +module_param(ts_nr_packets, int, 0444); +MODULE_PARM_DESC(ts_nr_packets,"size of a ts buffers (in ts packets)"); + +int saa7134_ts_init_hw(struct saa7134_dev *dev) +{ + /* deactivate TS softreset */ + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + /* TSSOP high active, TSVAL high active, TSLOCK ignored */ + saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + saa_writeb(SAA7134_TS_PARALLEL_SERIAL, (TS_PACKET_SIZE-1)); + saa_writeb(SAA7134_TS_DMA0, ((dev->ts.nr_packets-1)&0xff)); + saa_writeb(SAA7134_TS_DMA1, (((dev->ts.nr_packets-1)>>8)&0xff)); + /* TSNOPIT=0, TSCOLAP=0 */ + saa_writeb(SAA7134_TS_DMA2, + ((((dev->ts.nr_packets-1)>>16)&0x3f) | 0x00)); + + return 0; +} + +int saa7134_ts_init1(struct saa7134_dev *dev) +{ + /* sanitycheck insmod options */ + if (tsbufs < 2) + tsbufs = 2; + if (tsbufs > VIDEO_MAX_FRAME) + tsbufs = VIDEO_MAX_FRAME; + if (ts_nr_packets < 4) + ts_nr_packets = 4; + if (ts_nr_packets > 312) + ts_nr_packets = 312; + dev->ts.nr_bufs = tsbufs; + dev->ts.nr_packets = ts_nr_packets; + + INIT_LIST_HEAD(&dev->ts_q.queue); + init_timer(&dev->ts_q.timeout); + dev->ts_q.timeout.function = saa7134_buffer_timeout; + dev->ts_q.timeout.data = (unsigned long)(&dev->ts_q); + dev->ts_q.dev = dev; + dev->ts_q.need_two = 1; + dev->ts_started = 0; + saa7134_pgtable_alloc(dev->pci,&dev->ts.pt_ts); + + /* init TS hw */ + saa7134_ts_init_hw(dev); + + return 0; +} + +/* Function for stop TS */ +int saa7134_ts_stop(struct saa7134_dev *dev) +{ + dprintk("TS stop\n"); + + BUG_ON(!dev->ts_started); + + /* Stop TS stream */ + switch (saa7134_boards[dev->board].ts_type) { + case SAA7134_MPEG_TS_PARALLEL: + saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + dev->ts_started = 0; + break; + case SAA7134_MPEG_TS_SERIAL: + saa_writeb(SAA7134_TS_SERIAL0, 0x40); + dev->ts_started = 0; + break; + } + return 0; +} + +/* Function for start TS */ +int saa7134_ts_start(struct saa7134_dev *dev) +{ + dprintk("TS start\n"); + + BUG_ON(dev->ts_started); + + /* dma: setup channel 5 (= TS) */ + saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff); + saa_writeb(SAA7134_TS_DMA1, + ((dev->ts.nr_packets - 1) >> 8) & 0xff); + /* TSNOPIT=0, TSCOLAP=0 */ + saa_writeb(SAA7134_TS_DMA2, + (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00); + saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); + saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (dev->ts.pt_ts.dma >> 12)); + + /* reset hardware TS buffers */ + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + saa_writeb(SAA7134_TS_SERIAL1, 0x03); + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + saa_writeb(SAA7134_TS_SERIAL1, 0x01); + + /* TS clock non-inverted */ + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + + /* Start TS stream */ + switch (saa7134_boards[dev->board].ts_type) { + case SAA7134_MPEG_TS_PARALLEL: + saa_writeb(SAA7134_TS_SERIAL0, 0x40); + saa_writeb(SAA7134_TS_PARALLEL, 0xec | + (saa7134_boards[dev->board].ts_force_val << 4)); + break; + case SAA7134_MPEG_TS_SERIAL: + saa_writeb(SAA7134_TS_SERIAL0, 0xd8); + saa_writeb(SAA7134_TS_PARALLEL, 0x6c | + (saa7134_boards[dev->board].ts_force_val << 4)); + saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc); + saa_writeb(SAA7134_TS_SERIAL1, 0x02); + break; + } + + dev->ts_started = 1; + + return 0; +} + +int saa7134_ts_fini(struct saa7134_dev *dev) +{ + saa7134_pgtable_free(dev->pci,&dev->ts.pt_ts); + return 0; +} + +void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status) +{ + enum v4l2_field field; + + spin_lock(&dev->slock); + if (dev->ts_q.curr) { + field = dev->ts_q.curr->vb.field; + if (field == V4L2_FIELD_TOP) { + if ((status & 0x100000) != 0x000000) + goto done; + } else { + if ((status & 0x100000) != 0x100000) + goto done; + } + saa7134_buffer_finish(dev,&dev->ts_q,VIDEOBUF_DONE); + } + saa7134_buffer_next(dev,&dev->ts_q); + + done: + spin_unlock(&dev->slock); +} + +/* ----------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134-tvaudio.c b/drivers/media/pci/saa7134/saa7134-tvaudio.c new file mode 100644 index 00000000..0f34e09d --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-tvaudio.c @@ -0,0 +1,1088 @@ +/* + * + * device driver for philips saa7134 based TV cards + * tv audio decoder (fm stereo, nicam, ...) + * + * (c) 2001-03 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" + +/* ------------------------------------------------------------------ */ + +static unsigned int audio_debug; +module_param(audio_debug, int, 0644); +MODULE_PARM_DESC(audio_debug,"enable debug messages [tv audio]"); + +static unsigned int audio_ddep; +module_param(audio_ddep, int, 0644); +MODULE_PARM_DESC(audio_ddep,"audio ddep overwrite"); + +static int audio_clock_override = UNSET; +module_param(audio_clock_override, int, 0644); + +static int audio_clock_tweak; +module_param(audio_clock_tweak, int, 0644); +MODULE_PARM_DESC(audio_clock_tweak, "Audio clock tick fine tuning for cards with audio crystal that's slightly off (range [-1024 .. 1024])"); + +#define dprintk(fmt, arg...) if (audio_debug) \ + printk(KERN_DEBUG "%s/audio: " fmt, dev->name , ## arg) +#define d2printk(fmt, arg...) if (audio_debug > 1) \ + printk(KERN_DEBUG "%s/audio: " fmt, dev->name, ## arg) + +#define print_regb(reg) printk("%s: reg 0x%03x [%-16s]: 0x%02x\n", \ + dev->name,(SAA7134_##reg),(#reg),saa_readb((SAA7134_##reg))) + +/* msecs */ +#define SCAN_INITIAL_DELAY 1000 +#define SCAN_SAMPLE_DELAY 200 +#define SCAN_SUBCARRIER_DELAY 2000 + +/* ------------------------------------------------------------------ */ +/* saa7134 code */ + +static struct mainscan { + char *name; + v4l2_std_id std; + int carr; +} mainscan[] = { + { + .name = "MN", + .std = V4L2_STD_MN, + .carr = 4500, + },{ + .name = "BGH", + .std = V4L2_STD_B | V4L2_STD_GH, + .carr = 5500, + },{ + .name = "I", + .std = V4L2_STD_PAL_I, + .carr = 6000, + },{ + .name = "DKL", + .std = V4L2_STD_DK | V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC, + .carr = 6500, + } +}; + +static struct saa7134_tvaudio tvaudio[] = { + { + .name = "PAL-B/G FM-stereo", + .std = V4L2_STD_PAL_BG, + .mode = TVAUDIO_FM_BG_STEREO, + .carr1 = 5500, + .carr2 = 5742, + },{ + .name = "PAL-D/K1 FM-stereo", + .std = V4L2_STD_PAL_DK, + .carr1 = 6500, + .carr2 = 6258, + .mode = TVAUDIO_FM_BG_STEREO, + },{ + .name = "PAL-D/K2 FM-stereo", + .std = V4L2_STD_PAL_DK, + .carr1 = 6500, + .carr2 = 6742, + .mode = TVAUDIO_FM_BG_STEREO, + },{ + .name = "PAL-D/K3 FM-stereo", + .std = V4L2_STD_PAL_DK, + .carr1 = 6500, + .carr2 = 5742, + .mode = TVAUDIO_FM_BG_STEREO, + },{ + .name = "PAL-B/G NICAM", + .std = V4L2_STD_PAL_BG, + .carr1 = 5500, + .carr2 = 5850, + .mode = TVAUDIO_NICAM_FM, + },{ + .name = "PAL-I NICAM", + .std = V4L2_STD_PAL_I, + .carr1 = 6000, + .carr2 = 6552, + .mode = TVAUDIO_NICAM_FM, + },{ + .name = "PAL-D/K NICAM", + .std = V4L2_STD_PAL_DK, + .carr1 = 6500, + .carr2 = 5850, + .mode = TVAUDIO_NICAM_FM, + },{ + .name = "SECAM-L NICAM", + .std = V4L2_STD_SECAM_L, + .carr1 = 6500, + .carr2 = 5850, + .mode = TVAUDIO_NICAM_AM, + },{ + .name = "SECAM-D/K NICAM", + .std = V4L2_STD_SECAM_DK, + .carr1 = 6500, + .carr2 = 5850, + .mode = TVAUDIO_NICAM_FM, + },{ + .name = "NTSC-A2 FM-stereo", + .std = V4L2_STD_NTSC, + .carr1 = 4500, + .carr2 = 4724, + .mode = TVAUDIO_FM_K_STEREO, + },{ + .name = "NTSC-M", + .std = V4L2_STD_NTSC, + .carr1 = 4500, + .carr2 = -1, + .mode = TVAUDIO_FM_MONO, + } +}; +#define TVAUDIO ARRAY_SIZE(tvaudio) + +/* ------------------------------------------------------------------ */ + +static u32 tvaudio_carr2reg(u32 carrier) +{ + u64 a = carrier; + + a <<= 24; + do_div(a,12288); + return a; +} + +static void tvaudio_setcarrier(struct saa7134_dev *dev, + int primary, int secondary) +{ + if (-1 == secondary) + secondary = primary; + saa_writel(SAA7134_CARRIER1_FREQ0 >> 2, tvaudio_carr2reg(primary)); + saa_writel(SAA7134_CARRIER2_FREQ0 >> 2, tvaudio_carr2reg(secondary)); +} + +#define SAA7134_MUTE_MASK 0xbb +#define SAA7134_MUTE_ANALOG 0x04 +#define SAA7134_MUTE_I2S 0x40 + +static void mute_input_7134(struct saa7134_dev *dev) +{ + unsigned int mute; + struct saa7134_input *in; + int ausel=0, ics=0, ocs=0; + int mask; + + /* look what is to do ... */ + in = dev->input; + mute = (dev->ctl_mute || + (dev->automute && (&card(dev).radio) != in)); + if (card(dev).mute.name) { + /* + * 7130 - we'll mute using some unconnected audio input + * 7134 - we'll probably should switch external mux with gpio + */ + if (mute) + in = &card(dev).mute; + } + + if (dev->hw_mute == mute && + dev->hw_input == in && !dev->insuspend) { + dprintk("mute/input: nothing to do [mute=%d,input=%s]\n", + mute,in->name); + return; + } + + dprintk("ctl_mute=%d automute=%d input=%s => mute=%d input=%s\n", + dev->ctl_mute,dev->automute,dev->input->name,mute,in->name); + dev->hw_mute = mute; + dev->hw_input = in; + + if (PCI_DEVICE_ID_PHILIPS_SAA7134 == dev->pci->device) + /* 7134 mute */ + saa_writeb(SAA7134_AUDIO_MUTE_CTRL, mute ? + SAA7134_MUTE_MASK | + SAA7134_MUTE_ANALOG | + SAA7134_MUTE_I2S : + SAA7134_MUTE_MASK); + + /* switch internal audio mux */ + switch (in->amux) { + case TV: ausel=0xc0; ics=0x00; ocs=0x02; break; + case LINE1: ausel=0x80; ics=0x00; ocs=0x00; break; + case LINE2: ausel=0x80; ics=0x08; ocs=0x01; break; + case LINE2_LEFT: ausel=0x80; ics=0x08; ocs=0x05; break; + } + saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, 0xc0, ausel); + saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x08, ics); + saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x07, ocs); + // for oss, we need to change the clock configuration + if (in->amux == TV) + saa_andorb(SAA7134_SIF_SAMPLE_FREQ, 0x03, 0x00); + else + saa_andorb(SAA7134_SIF_SAMPLE_FREQ, 0x03, 0x01); + + /* switch gpio-connected external audio mux */ + if (0 == card(dev).gpiomask) + return; + + mask = card(dev).gpiomask; + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, mask, mask); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, mask, in->gpio); + saa7134_track_gpio(dev,in->name); +} + +static void tvaudio_setmode(struct saa7134_dev *dev, + struct saa7134_tvaudio *audio, + char *note) +{ + int acpf, tweak = 0; + + if (dev->tvnorm->id == V4L2_STD_NTSC) { + acpf = 0x19066; + } else { + acpf = 0x1e000; + } + if (audio_clock_tweak > -1024 && audio_clock_tweak < 1024) + tweak = audio_clock_tweak; + + if (note) + dprintk("tvaudio_setmode: %s %s [%d.%03d/%d.%03d MHz] acpf=%d%+d\n", + note,audio->name, + audio->carr1 / 1000, audio->carr1 % 1000, + audio->carr2 / 1000, audio->carr2 % 1000, + acpf, tweak); + + acpf += tweak; + saa_writeb(SAA7134_AUDIO_CLOCKS_PER_FIELD0, (acpf & 0x0000ff) >> 0); + saa_writeb(SAA7134_AUDIO_CLOCKS_PER_FIELD1, (acpf & 0x00ff00) >> 8); + saa_writeb(SAA7134_AUDIO_CLOCKS_PER_FIELD2, (acpf & 0x030000) >> 16); + tvaudio_setcarrier(dev,audio->carr1,audio->carr2); + + switch (audio->mode) { + case TVAUDIO_FM_MONO: + case TVAUDIO_FM_BG_STEREO: + saa_writeb(SAA7134_DEMODULATOR, 0x00); + saa_writeb(SAA7134_DCXO_IDENT_CTRL, 0x00); + saa_writeb(SAA7134_FM_DEEMPHASIS, 0x22); + saa_writeb(SAA7134_FM_DEMATRIX, 0x80); + saa_writeb(SAA7134_STEREO_DAC_OUTPUT_SELECT, 0xa0); + break; + case TVAUDIO_FM_K_STEREO: + saa_writeb(SAA7134_DEMODULATOR, 0x00); + saa_writeb(SAA7134_DCXO_IDENT_CTRL, 0x01); + saa_writeb(SAA7134_FM_DEEMPHASIS, 0x22); + saa_writeb(SAA7134_FM_DEMATRIX, 0x80); + saa_writeb(SAA7134_STEREO_DAC_OUTPUT_SELECT, 0xa0); + break; + case TVAUDIO_NICAM_FM: + saa_writeb(SAA7134_DEMODULATOR, 0x10); + saa_writeb(SAA7134_DCXO_IDENT_CTRL, 0x00); + saa_writeb(SAA7134_FM_DEEMPHASIS, 0x44); + saa_writeb(SAA7134_STEREO_DAC_OUTPUT_SELECT, 0xa1); + saa_writeb(SAA7134_NICAM_CONFIG, 0x00); + break; + case TVAUDIO_NICAM_AM: + saa_writeb(SAA7134_DEMODULATOR, 0x12); + saa_writeb(SAA7134_DCXO_IDENT_CTRL, 0x00); + saa_writeb(SAA7134_FM_DEEMPHASIS, 0x44); + saa_writeb(SAA7134_STEREO_DAC_OUTPUT_SELECT, 0xa1); + saa_writeb(SAA7134_NICAM_CONFIG, 0x00); + break; + case TVAUDIO_FM_SAT_STEREO: + /* not implemented (yet) */ + break; + } +} + +static int tvaudio_sleep(struct saa7134_dev *dev, int timeout) +{ + if (dev->thread.scan1 == dev->thread.scan2 && + !kthread_should_stop()) { + if (timeout < 0) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } else { + schedule_timeout_interruptible + (msecs_to_jiffies(timeout)); + } + } + return dev->thread.scan1 != dev->thread.scan2; +} + +static int tvaudio_checkcarrier(struct saa7134_dev *dev, struct mainscan *scan) +{ + __s32 left,right,value; + + if (!(dev->tvnorm->id & scan->std)) { + value = 0; + dprintk("skipping %d.%03d MHz [%4s]\n", + scan->carr / 1000, scan->carr % 1000, scan->name); + return 0; + } + + if (audio_debug > 1) { + int i; + dprintk("debug %d:",scan->carr); + for (i = -150; i <= 150; i += 30) { + tvaudio_setcarrier(dev,scan->carr+i,scan->carr+i); + saa_readl(SAA7134_LEVEL_READOUT1 >> 2); + if (tvaudio_sleep(dev,SCAN_SAMPLE_DELAY)) + return -1; + value = saa_readl(SAA7134_LEVEL_READOUT1 >> 2); + if (0 == i) + printk(" # %6d # ",value >> 16); + else + printk(" %6d",value >> 16); + } + printk("\n"); + } + + tvaudio_setcarrier(dev,scan->carr-90,scan->carr-90); + saa_readl(SAA7134_LEVEL_READOUT1 >> 2); + if (tvaudio_sleep(dev,SCAN_SAMPLE_DELAY)) + return -1; + left = saa_readl(SAA7134_LEVEL_READOUT1 >> 2); + + tvaudio_setcarrier(dev,scan->carr+90,scan->carr+90); + saa_readl(SAA7134_LEVEL_READOUT1 >> 2); + if (tvaudio_sleep(dev,SCAN_SAMPLE_DELAY)) + return -1; + right = saa_readl(SAA7134_LEVEL_READOUT1 >> 2); + + left >>= 16; + right >>= 16; + value = left > right ? left - right : right - left; + dprintk("scanning %d.%03d MHz [%4s] => dc is %5d [%d/%d]\n", + scan->carr / 1000, scan->carr % 1000, + scan->name, value, left, right); + return value; +} + + +static int tvaudio_getstereo(struct saa7134_dev *dev, struct saa7134_tvaudio *audio) +{ + __u32 idp, nicam, nicam_status; + int retval = -1; + + switch (audio->mode) { + case TVAUDIO_FM_MONO: + return V4L2_TUNER_SUB_MONO; + case TVAUDIO_FM_K_STEREO: + case TVAUDIO_FM_BG_STEREO: + idp = (saa_readb(SAA7134_IDENT_SIF) & 0xe0) >> 5; + dprintk("getstereo: fm/stereo: idp=0x%x\n",idp); + if (0x03 == (idp & 0x03)) + retval = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + else if (0x05 == (idp & 0x05)) + retval = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + else if (0x01 == (idp & 0x01)) + retval = V4L2_TUNER_SUB_MONO; + break; + case TVAUDIO_FM_SAT_STEREO: + /* not implemented (yet) */ + break; + case TVAUDIO_NICAM_FM: + case TVAUDIO_NICAM_AM: + nicam = saa_readb(SAA7134_AUDIO_STATUS); + dprintk("getstereo: nicam=0x%x\n",nicam); + if (nicam & 0x1) { + nicam_status = saa_readb(SAA7134_NICAM_STATUS); + dprintk("getstereo: nicam_status=0x%x\n", nicam_status); + + switch (nicam_status & 0x03) { + case 0x01: + retval = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + break; + case 0x02: + retval = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + break; + default: + retval = V4L2_TUNER_SUB_MONO; + } + } else { + /* No nicam detected */ + } + break; + } + if (retval != -1) + dprintk("found audio subchannels:%s%s%s%s\n", + (retval & V4L2_TUNER_SUB_MONO) ? " mono" : "", + (retval & V4L2_TUNER_SUB_STEREO) ? " stereo" : "", + (retval & V4L2_TUNER_SUB_LANG1) ? " lang1" : "", + (retval & V4L2_TUNER_SUB_LANG2) ? " lang2" : ""); + return retval; +} + +static int tvaudio_setstereo(struct saa7134_dev *dev, struct saa7134_tvaudio *audio, + u32 mode) +{ + static char *name[] = { + [ V4L2_TUNER_MODE_MONO ] = "mono", + [ V4L2_TUNER_MODE_STEREO ] = "stereo", + [ V4L2_TUNER_MODE_LANG1 ] = "lang1", + [ V4L2_TUNER_MODE_LANG2 ] = "lang2", + [ V4L2_TUNER_MODE_LANG1_LANG2 ] = "lang1+lang2", + }; + static u32 fm[] = { + [ V4L2_TUNER_MODE_MONO ] = 0x00, /* ch1 */ + [ V4L2_TUNER_MODE_STEREO ] = 0x80, /* auto */ + [ V4L2_TUNER_MODE_LANG1 ] = 0x00, /* ch1 */ + [ V4L2_TUNER_MODE_LANG2 ] = 0x01, /* ch2 */ + [ V4L2_TUNER_MODE_LANG1_LANG2 ] = 0x80, /* auto */ + }; + u32 reg; + + switch (audio->mode) { + case TVAUDIO_FM_MONO: + /* nothing to do ... */ + break; + case TVAUDIO_FM_K_STEREO: + case TVAUDIO_FM_BG_STEREO: + case TVAUDIO_NICAM_AM: + case TVAUDIO_NICAM_FM: + dprintk("setstereo [fm] => %s\n", + name[ mode % ARRAY_SIZE(name) ]); + reg = fm[ mode % ARRAY_SIZE(fm) ]; + saa_writeb(SAA7134_FM_DEMATRIX, reg); + break; + case TVAUDIO_FM_SAT_STEREO: + /* Not implemented */ + break; + } + return 0; +} + +static int tvaudio_thread(void *data) +{ + struct saa7134_dev *dev = data; + int carr_vals[ARRAY_SIZE(mainscan)]; + unsigned int i, audio, nscan; + int max1,max2,carrier,rx,mode,lastmode,default_carrier; + + set_freezable(); + + for (;;) { + tvaudio_sleep(dev,-1); + if (kthread_should_stop()) + goto done; + + restart: + try_to_freeze(); + + dev->thread.scan1 = dev->thread.scan2; + dprintk("tvaudio thread scan start [%d]\n",dev->thread.scan1); + dev->tvaudio = NULL; + + saa_writeb(SAA7134_MONITOR_SELECT, 0xa0); + saa_writeb(SAA7134_FM_DEMATRIX, 0x80); + + if (dev->ctl_automute) + dev->automute = 1; + + mute_input_7134(dev); + + /* give the tuner some time */ + if (tvaudio_sleep(dev,SCAN_INITIAL_DELAY)) + goto restart; + + max1 = 0; + max2 = 0; + nscan = 0; + carrier = 0; + default_carrier = 0; + for (i = 0; i < ARRAY_SIZE(mainscan); i++) { + if (!(dev->tvnorm->id & mainscan[i].std)) + continue; + if (!default_carrier) + default_carrier = mainscan[i].carr; + nscan++; + } + + if (1 == nscan) { + /* only one candidate -- skip scan ;) */ + dprintk("only one main carrier candidate - skipping scan\n"); + max1 = 12345; + carrier = default_carrier; + } else { + /* scan for the main carrier */ + saa_writeb(SAA7134_MONITOR_SELECT,0x00); + tvaudio_setmode(dev,&tvaudio[0],NULL); + for (i = 0; i < ARRAY_SIZE(mainscan); i++) { + carr_vals[i] = tvaudio_checkcarrier(dev, mainscan+i); + if (dev->thread.scan1 != dev->thread.scan2) + goto restart; + } + for (max1 = 0, max2 = 0, i = 0; i < ARRAY_SIZE(mainscan); i++) { + if (max1 < carr_vals[i]) { + max2 = max1; + max1 = carr_vals[i]; + carrier = mainscan[i].carr; + } else if (max2 < carr_vals[i]) { + max2 = carr_vals[i]; + } + } + } + + if (0 != carrier && max1 > 2000 && max1 > max2*3) { + /* found good carrier */ + dprintk("found %s main sound carrier @ %d.%03d MHz [%d/%d]\n", + dev->tvnorm->name, carrier/1000, carrier%1000, + max1, max2); + dev->last_carrier = carrier; + dev->automute = 0; + + } else if (0 != dev->last_carrier) { + /* no carrier -- try last detected one as fallback */ + carrier = dev->last_carrier; + dprintk("audio carrier scan failed, " + "using %d.%03d MHz [last detected]\n", + carrier/1000, carrier%1000); + dev->automute = 1; + + } else { + /* no carrier + no fallback -- use default */ + carrier = default_carrier; + dprintk("audio carrier scan failed, " + "using %d.%03d MHz [default]\n", + carrier/1000, carrier%1000); + dev->automute = 1; + } + tvaudio_setcarrier(dev,carrier,carrier); + saa_andorb(SAA7134_STEREO_DAC_OUTPUT_SELECT, 0x30, 0x00); + saa7134_tvaudio_setmute(dev); + /* find the exact tv audio norm */ + for (audio = UNSET, i = 0; i < TVAUDIO; i++) { + if (dev->tvnorm->id != UNSET && + !(dev->tvnorm->id & tvaudio[i].std)) + continue; + if (tvaudio[i].carr1 != carrier) + continue; + /* Note: at least the primary carrier is right here */ + if (UNSET == audio) + audio = i; + tvaudio_setmode(dev,&tvaudio[i],"trying"); + if (tvaudio_sleep(dev,SCAN_SUBCARRIER_DELAY)) + goto restart; + if (-1 != tvaudio_getstereo(dev,&tvaudio[i])) { + audio = i; + break; + } + } + saa_andorb(SAA7134_STEREO_DAC_OUTPUT_SELECT, 0x30, 0x30); + if (UNSET == audio) + continue; + tvaudio_setmode(dev,&tvaudio[audio],"using"); + + tvaudio_setstereo(dev,&tvaudio[audio],V4L2_TUNER_MODE_MONO); + dev->tvaudio = &tvaudio[audio]; + + lastmode = 42; + for (;;) { + + try_to_freeze(); + + if (tvaudio_sleep(dev,5000)) + goto restart; + if (kthread_should_stop()) + break; + if (UNSET == dev->thread.mode) { + rx = tvaudio_getstereo(dev, &tvaudio[audio]); + mode = saa7134_tvaudio_rx2mode(rx); + } else { + mode = dev->thread.mode; + } + if (lastmode != mode) { + tvaudio_setstereo(dev,&tvaudio[audio],mode); + lastmode = mode; + } + } + } + + done: + dev->thread.stopped = 1; + return 0; +} + +/* ------------------------------------------------------------------ */ +/* saa7133 / saa7135 code */ + +static char *stdres[0x20] = { + [0x00] = "no standard detected", + [0x01] = "B/G (in progress)", + [0x02] = "D/K (in progress)", + [0x03] = "M (in progress)", + + [0x04] = "B/G A2", + [0x05] = "B/G NICAM", + [0x06] = "D/K A2 (1)", + [0x07] = "D/K A2 (2)", + [0x08] = "D/K A2 (3)", + [0x09] = "D/K NICAM", + [0x0a] = "L NICAM", + [0x0b] = "I NICAM", + + [0x0c] = "M Korea", + [0x0d] = "M BTSC ", + [0x0e] = "M EIAJ", + + [0x0f] = "FM radio / IF 10.7 / 50 deemp", + [0x10] = "FM radio / IF 10.7 / 75 deemp", + [0x11] = "FM radio / IF sel / 50 deemp", + [0x12] = "FM radio / IF sel / 75 deemp", + + [0x13 ... 0x1e ] = "unknown", + [0x1f] = "??? [in progress]", +}; + +#define DSP_RETRY 32 +#define DSP_DELAY 16 +#define SAA7135_DSP_RWCLEAR_RERR 1 + +static inline int saa_dsp_reset_error_bit(struct saa7134_dev *dev) +{ + int state = saa_readb(SAA7135_DSP_RWSTATE); + if (unlikely(state & SAA7135_DSP_RWSTATE_ERR)) { + d2printk("%s: resetting error bit\n", dev->name); + saa_writeb(SAA7135_DSP_RWCLEAR, SAA7135_DSP_RWCLEAR_RERR); + } + return 0; +} + +static inline int saa_dsp_wait_bit(struct saa7134_dev *dev, int bit) +{ + int state, count = DSP_RETRY; + + state = saa_readb(SAA7135_DSP_RWSTATE); + if (unlikely(state & SAA7135_DSP_RWSTATE_ERR)) { + printk(KERN_WARNING "%s: dsp access error\n", dev->name); + saa_dsp_reset_error_bit(dev); + return -EIO; + } + while (0 == (state & bit)) { + if (unlikely(0 == count)) { + printk("%s: dsp access wait timeout [bit=%s]\n", + dev->name, + (bit & SAA7135_DSP_RWSTATE_WRR) ? "WRR" : + (bit & SAA7135_DSP_RWSTATE_RDB) ? "RDB" : + (bit & SAA7135_DSP_RWSTATE_IDA) ? "IDA" : + "???"); + return -EIO; + } + saa_wait(DSP_DELAY); + state = saa_readb(SAA7135_DSP_RWSTATE); + count--; + } + return 0; +} + + +int saa_dsp_writel(struct saa7134_dev *dev, int reg, u32 value) +{ + int err; + + d2printk("dsp write reg 0x%x = 0x%06x\n",reg<<2,value); + err = saa_dsp_wait_bit(dev,SAA7135_DSP_RWSTATE_WRR); + if (err < 0) + return err; + saa_writel(reg,value); + err = saa_dsp_wait_bit(dev,SAA7135_DSP_RWSTATE_WRR); + if (err < 0) + return err; + return 0; +} + +static int getstereo_7133(struct saa7134_dev *dev) +{ + int retval = V4L2_TUNER_SUB_MONO; + u32 value; + + value = saa_readl(0x528 >> 2); + if (value & 0x20) + retval = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + if (value & 0x40) + retval = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + return retval; +} + +static int mute_input_7133(struct saa7134_dev *dev) +{ + u32 reg = 0; + u32 xbarin, xbarout; + int mask; + struct saa7134_input *in; + + xbarin = 0x03; + switch (dev->input->amux) { + case TV: + reg = 0x02; + xbarin = 0; + break; + case LINE1: + reg = 0x00; + break; + case LINE2: + case LINE2_LEFT: + reg = 0x09; + break; + } + saa_dsp_writel(dev, 0x464 >> 2, xbarin); + if (dev->ctl_mute) { + reg = 0x07; + xbarout = 0xbbbbbb; + } else + xbarout = 0xbbbb10; + saa_dsp_writel(dev, 0x46c >> 2, xbarout); + + saa_writel(0x594 >> 2, reg); + + + /* switch gpio-connected external audio mux */ + if (0 != card(dev).gpiomask) { + mask = card(dev).gpiomask; + + if (card(dev).mute.name && dev->ctl_mute) + in = &card(dev).mute; + else + in = dev->input; + + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, mask, mask); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, mask, in->gpio); + saa7134_track_gpio(dev,in->name); + } + + return 0; +} + +static int tvaudio_thread_ddep(void *data) +{ + struct saa7134_dev *dev = data; + u32 value, norms; + + set_freezable(); + for (;;) { + tvaudio_sleep(dev,-1); + if (kthread_should_stop()) + goto done; + restart: + try_to_freeze(); + + dev->thread.scan1 = dev->thread.scan2; + dprintk("tvaudio thread scan start [%d]\n",dev->thread.scan1); + + if (audio_ddep >= 0x04 && audio_ddep <= 0x0e) { + /* insmod option override */ + norms = (audio_ddep << 2) | 0x01; + dprintk("ddep override: %s\n",stdres[audio_ddep]); + } else if (&card(dev).radio == dev->input) { + dprintk("FM Radio\n"); + if (dev->tuner_type == TUNER_PHILIPS_TDA8290) { + norms = (0x11 << 2) | 0x01; + /* set IF frequency to 5.5 MHz */ + saa_dsp_writel(dev, 0x42c >> 2, 0x729555); + } else { + norms = (0x0f << 2) | 0x01; + } + } else { + /* (let chip) scan for sound carrier */ + norms = 0; + if (dev->tvnorm->id & (V4L2_STD_B | V4L2_STD_GH)) + norms |= 0x04; + if (dev->tvnorm->id & V4L2_STD_PAL_I) + norms |= 0x20; + if (dev->tvnorm->id & V4L2_STD_DK) + norms |= 0x08; + if (dev->tvnorm->id & V4L2_STD_MN) + norms |= 0x40; + if (dev->tvnorm->id & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) + norms |= 0x10; + if (0 == norms) + norms = 0x7c; /* all */ + dprintk("scanning:%s%s%s%s%s\n", + (norms & 0x04) ? " B/G" : "", + (norms & 0x08) ? " D/K" : "", + (norms & 0x10) ? " L/L'" : "", + (norms & 0x20) ? " I" : "", + (norms & 0x40) ? " M" : ""); + } + + /* kick automatic standard detection */ + saa_dsp_writel(dev, 0x454 >> 2, 0); + saa_dsp_writel(dev, 0x454 >> 2, norms | 0x80); + + /* setup crossbars */ + saa_dsp_writel(dev, 0x464 >> 2, 0x000000); + saa_dsp_writel(dev, 0x470 >> 2, 0x101010); + + if (tvaudio_sleep(dev,3000)) + goto restart; + value = saa_readl(0x528 >> 2) & 0xffffff; + + dprintk("tvaudio thread status: 0x%x [%s%s%s]\n", + value, stdres[value & 0x1f], + (value & 0x000020) ? ",stereo" : "", + (value & 0x000040) ? ",dual" : ""); + dprintk("detailed status: " + "%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n", + (value & 0x000080) ? " A2/EIAJ pilot tone " : "", + (value & 0x000100) ? " A2/EIAJ dual " : "", + (value & 0x000200) ? " A2/EIAJ stereo " : "", + (value & 0x000400) ? " A2/EIAJ noise mute " : "", + + (value & 0x000800) ? " BTSC/FM radio pilot " : "", + (value & 0x001000) ? " SAP carrier " : "", + (value & 0x002000) ? " BTSC stereo noise mute " : "", + (value & 0x004000) ? " SAP noise mute " : "", + (value & 0x008000) ? " VDSP " : "", + + (value & 0x010000) ? " NICST " : "", + (value & 0x020000) ? " NICDU " : "", + (value & 0x040000) ? " NICAM muted " : "", + (value & 0x080000) ? " NICAM reserve sound " : "", + + (value & 0x100000) ? " init done " : ""); + } + + done: + dev->thread.stopped = 1; + return 0; +} + +/* ------------------------------------------------------------------ */ +/* common stuff + external entry points */ + +void saa7134_enable_i2s(struct saa7134_dev *dev) +{ + int i2s_format; + + if (!card_is_empress(dev)) + return; + + if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130) + return; + + /* configure GPIO for out */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x0E000000, 0x00000000); + + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + /* Set I2S format (SONY)  */ + saa_writeb(SAA7133_I2S_AUDIO_CONTROL, 0x00); + /* Start I2S */ + saa_writeb(SAA7134_I2S_AUDIO_OUTPUT, 0x11); + break; + + case PCI_DEVICE_ID_PHILIPS_SAA7134: + i2s_format = (dev->input->amux == TV) ? 0x00 : 0x01; + + /* enable I2S audio output for the mpeg encoder */ + saa_writeb(SAA7134_I2S_OUTPUT_SELECT, 0x80); + saa_writeb(SAA7134_I2S_OUTPUT_FORMAT, i2s_format); + saa_writeb(SAA7134_I2S_OUTPUT_LEVEL, 0x0F); + saa_writeb(SAA7134_I2S_AUDIO_OUTPUT, 0x01); + + default: + break; + } +} + +int saa7134_tvaudio_rx2mode(u32 rx) +{ + u32 mode; + + mode = V4L2_TUNER_MODE_MONO; + if (rx & V4L2_TUNER_SUB_STEREO) + mode = V4L2_TUNER_MODE_STEREO; + else if (rx & V4L2_TUNER_SUB_LANG1) + mode = V4L2_TUNER_MODE_LANG1; + else if (rx & V4L2_TUNER_SUB_LANG2) + mode = V4L2_TUNER_MODE_LANG2; + return mode; +} + +void saa7134_tvaudio_setmute(struct saa7134_dev *dev) +{ + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7130: + case PCI_DEVICE_ID_PHILIPS_SAA7134: + mute_input_7134(dev); + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + mute_input_7133(dev); + break; + } +} + +void saa7134_tvaudio_setinput(struct saa7134_dev *dev, + struct saa7134_input *in) +{ + dev->input = in; + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7130: + case PCI_DEVICE_ID_PHILIPS_SAA7134: + mute_input_7134(dev); + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + mute_input_7133(dev); + break; + } + saa7134_enable_i2s(dev); +} + +void saa7134_tvaudio_setvolume(struct saa7134_dev *dev, int level) +{ + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + saa_writeb(SAA7134_CHANNEL1_LEVEL, level & 0x1f); + saa_writeb(SAA7134_CHANNEL2_LEVEL, level & 0x1f); + saa_writeb(SAA7134_NICAM_LEVEL_ADJUST, level & 0x1f); + break; + } +} + +int saa7134_tvaudio_getstereo(struct saa7134_dev *dev) +{ + int retval = V4L2_TUNER_SUB_MONO; + + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + if (dev->tvaudio) + retval = tvaudio_getstereo(dev,dev->tvaudio); + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + retval = getstereo_7133(dev); + break; + } + return retval; +} + +void saa7134_tvaudio_init(struct saa7134_dev *dev) +{ + int clock = saa7134_boards[dev->board].audio_clock; + + if (UNSET != audio_clock_override) + clock = audio_clock_override; + + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + /* init all audio registers */ + saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x00); + if (need_resched()) + schedule(); + else + udelay(10); + + saa_writeb(SAA7134_AUDIO_CLOCK0, clock & 0xff); + saa_writeb(SAA7134_AUDIO_CLOCK1, (clock >> 8) & 0xff); + saa_writeb(SAA7134_AUDIO_CLOCK2, (clock >> 16) & 0xff); + /* frame locked audio is mandatory for NICAM */ + saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x01); + saa_writeb(SAA7134_NICAM_ERROR_LOW, 0x14); + saa_writeb(SAA7134_NICAM_ERROR_HIGH, 0x50); + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + saa_writel(0x598 >> 2, clock); + saa_dsp_writel(dev, 0x474 >> 2, 0x00); + saa_dsp_writel(dev, 0x450 >> 2, 0x00); + } +} + +int saa7134_tvaudio_init2(struct saa7134_dev *dev) +{ + int (*my_thread)(void *data) = NULL; + + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + my_thread = tvaudio_thread; + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + my_thread = tvaudio_thread_ddep; + break; + } + + dev->thread.thread = NULL; + dev->thread.scan1 = dev->thread.scan2 = 0; + if (my_thread) { + saa7134_tvaudio_init(dev); + /* start tvaudio thread */ + dev->thread.thread = kthread_run(my_thread, dev, "%s", dev->name); + if (IS_ERR(dev->thread.thread)) { + printk(KERN_WARNING "%s: kernel_thread() failed\n", + dev->name); + /* XXX: missing error handling here */ + } + } + + saa7134_enable_i2s(dev); + return 0; +} + +int saa7134_tvaudio_close(struct saa7134_dev *dev) +{ + dev->automute = 1; + /* anything else to undo? */ + return 0; +} + +int saa7134_tvaudio_fini(struct saa7134_dev *dev) +{ + /* shutdown tvaudio thread */ + if (dev->thread.thread && !dev->thread.stopped) + kthread_stop(dev->thread.thread); + + saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x07, 0x00); /* LINE1 */ + return 0; +} + +int saa7134_tvaudio_do_scan(struct saa7134_dev *dev) +{ + if (dev->input->amux != TV) { + dprintk("sound IF not in use, skipping scan\n"); + dev->automute = 0; + saa7134_tvaudio_setmute(dev); + } else if (dev->thread.thread) { + dev->thread.mode = UNSET; + dev->thread.scan2++; + + if (!dev->insuspend && !dev->thread.stopped) + wake_up_process(dev->thread.thread); + } else { + dev->automute = 0; + saa7134_tvaudio_setmute(dev); + } + return 0; +} + +EXPORT_SYMBOL(saa_dsp_writel); +EXPORT_SYMBOL(saa7134_tvaudio_setmute); + +/* ----------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134-vbi.c b/drivers/media/pci/saa7134/saa7134-vbi.c new file mode 100644 index 00000000..e9aa94b8 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-vbi.c @@ -0,0 +1,255 @@ +/* + * + * device driver for philips saa7134 based TV cards + * video4linux video interface + * + * (c) 2001,02 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" + +/* ------------------------------------------------------------------ */ + +static unsigned int vbi_debug; +module_param(vbi_debug, int, 0644); +MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]"); + +static unsigned int vbibufs = 4; +module_param(vbibufs, int, 0444); +MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32"); + +#define dprintk(fmt, arg...) if (vbi_debug) \ + printk(KERN_DEBUG "%s/vbi: " fmt, dev->name , ## arg) + +/* ------------------------------------------------------------------ */ + +#define VBI_LINE_COUNT 16 +#define VBI_LINE_LENGTH 2048 +#define VBI_SCALE 0x200 + +static void task_init(struct saa7134_dev *dev, struct saa7134_buf *buf, + int task) +{ + struct saa7134_tvnorm *norm = dev->tvnorm; + + /* setup video scaler */ + saa_writeb(SAA7134_VBI_H_START1(task), norm->h_start & 0xff); + saa_writeb(SAA7134_VBI_H_START2(task), norm->h_start >> 8); + saa_writeb(SAA7134_VBI_H_STOP1(task), norm->h_stop & 0xff); + saa_writeb(SAA7134_VBI_H_STOP2(task), norm->h_stop >> 8); + saa_writeb(SAA7134_VBI_V_START1(task), norm->vbi_v_start_0 & 0xff); + saa_writeb(SAA7134_VBI_V_START2(task), norm->vbi_v_start_0 >> 8); + saa_writeb(SAA7134_VBI_V_STOP1(task), norm->vbi_v_stop_0 & 0xff); + saa_writeb(SAA7134_VBI_V_STOP2(task), norm->vbi_v_stop_0 >> 8); + + saa_writeb(SAA7134_VBI_H_SCALE_INC1(task), VBI_SCALE & 0xff); + saa_writeb(SAA7134_VBI_H_SCALE_INC2(task), VBI_SCALE >> 8); + saa_writeb(SAA7134_VBI_PHASE_OFFSET_LUMA(task), 0x00); + saa_writeb(SAA7134_VBI_PHASE_OFFSET_CHROMA(task), 0x00); + + saa_writeb(SAA7134_VBI_H_LEN1(task), buf->vb.width & 0xff); + saa_writeb(SAA7134_VBI_H_LEN2(task), buf->vb.width >> 8); + saa_writeb(SAA7134_VBI_V_LEN1(task), buf->vb.height & 0xff); + saa_writeb(SAA7134_VBI_V_LEN2(task), buf->vb.height >> 8); + + saa_andorb(SAA7134_DATA_PATH(task), 0xc0, 0x00); +} + +/* ------------------------------------------------------------------ */ + +static int buffer_activate(struct saa7134_dev *dev, + struct saa7134_buf *buf, + struct saa7134_buf *next) +{ + unsigned long control,base; + + dprintk("buffer_activate [%p]\n",buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->top_seen = 0; + + task_init(dev,buf,TASK_A); + task_init(dev,buf,TASK_B); + saa_writeb(SAA7134_OFMT_DATA_A, 0x06); + saa_writeb(SAA7134_OFMT_DATA_B, 0x06); + + /* DMA: setup channel 2+3 (= VBI Task A+B) */ + base = saa7134_buffer_base(buf); + control = SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (buf->pt->dma >> 12); + saa_writel(SAA7134_RS_BA1(2),base); + saa_writel(SAA7134_RS_BA2(2),base + buf->vb.size/2); + saa_writel(SAA7134_RS_PITCH(2),buf->vb.width); + saa_writel(SAA7134_RS_CONTROL(2),control); + saa_writel(SAA7134_RS_BA1(3),base); + saa_writel(SAA7134_RS_BA2(3),base + buf->vb.size/2); + saa_writel(SAA7134_RS_PITCH(3),buf->vb.width); + saa_writel(SAA7134_RS_CONTROL(3),control); + + /* start DMA */ + saa7134_set_dmabits(dev); + mod_timer(&dev->vbi_q.timeout, jiffies+BUFFER_TIMEOUT); + + return 0; +} + +static int buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct saa7134_fh *fh = q->priv_data; + struct saa7134_dev *dev = fh->dev; + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + struct saa7134_tvnorm *norm = dev->tvnorm; + unsigned int lines, llength, size; + int err; + + lines = norm->vbi_v_stop_0 - norm->vbi_v_start_0 +1; + if (lines > VBI_LINE_COUNT) + lines = VBI_LINE_COUNT; + llength = VBI_LINE_LENGTH; + size = lines * llength * 2; + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (buf->vb.size != size) + saa7134_dma_free(q,buf); + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + buf->vb.width = llength; + buf->vb.height = lines; + buf->vb.size = size; + buf->pt = &fh->pt_vbi; + + err = videobuf_iolock(q,&buf->vb,NULL); + if (err) + goto oops; + err = saa7134_pgtable_build(dev->pci,buf->pt, + dma->sglist, + dma->sglen, + saa7134_buffer_startpage(buf)); + if (err) + goto oops; + } + buf->vb.state = VIDEOBUF_PREPARED; + buf->activate = buffer_activate; + buf->vb.field = field; + return 0; + + oops: + saa7134_dma_free(q,buf); + return err; +} + +static int +buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + struct saa7134_fh *fh = q->priv_data; + struct saa7134_dev *dev = fh->dev; + int llength,lines; + + lines = dev->tvnorm->vbi_v_stop_0 - dev->tvnorm->vbi_v_start_0 +1; + llength = VBI_LINE_LENGTH; + *size = lines * llength * 2; + if (0 == *count) + *count = vbibufs; + *count = saa7134_buffer_count(*size,*count); + return 0; +} + +static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct saa7134_fh *fh = q->priv_data; + struct saa7134_dev *dev = fh->dev; + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + + saa7134_buffer_queue(dev,&dev->vbi_q,buf); +} + +static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + + saa7134_dma_free(q,buf); +} + +struct videobuf_queue_ops saa7134_vbi_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* ------------------------------------------------------------------ */ + +int saa7134_vbi_init1(struct saa7134_dev *dev) +{ + INIT_LIST_HEAD(&dev->vbi_q.queue); + init_timer(&dev->vbi_q.timeout); + dev->vbi_q.timeout.function = saa7134_buffer_timeout; + dev->vbi_q.timeout.data = (unsigned long)(&dev->vbi_q); + dev->vbi_q.dev = dev; + + if (vbibufs < 2) + vbibufs = 2; + if (vbibufs > VIDEO_MAX_FRAME) + vbibufs = VIDEO_MAX_FRAME; + return 0; +} + +int saa7134_vbi_fini(struct saa7134_dev *dev) +{ + /* nothing */ + return 0; +} + +void saa7134_irq_vbi_done(struct saa7134_dev *dev, unsigned long status) +{ + spin_lock(&dev->slock); + if (dev->vbi_q.curr) { + dev->vbi_fieldcount++; + /* make sure we have seen both fields */ + if ((status & 0x10) == 0x00) { + dev->vbi_q.curr->top_seen = 1; + goto done; + } + if (!dev->vbi_q.curr->top_seen) + goto done; + + dev->vbi_q.curr->vb.field_count = dev->vbi_fieldcount; + saa7134_buffer_finish(dev,&dev->vbi_q,VIDEOBUF_DONE); + } + saa7134_buffer_next(dev,&dev->vbi_q); + + done: + spin_unlock(&dev->slock); +} + +/* ----------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134-video.c b/drivers/media/pci/saa7134/saa7134-video.c new file mode 100644 index 00000000..cc409380 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-video.c @@ -0,0 +1,2607 @@ +/* + * + * device driver for philips saa7134 based TV cards + * video4linux video interface + * + * (c) 2001-03 Gerd Knorr [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include "saa7134-reg.h" +#include "saa7134.h" +#include +#include + +/* ------------------------------------------------------------------ */ + +unsigned int video_debug; +static unsigned int gbuffers = 8; +static unsigned int noninterlaced; /* 0 */ +static unsigned int gbufsize = 720*576*4; +static unsigned int gbufsize_max = 720*576*4; +static char secam[] = "--"; +module_param(video_debug, int, 0644); +MODULE_PARM_DESC(video_debug,"enable debug messages [video]"); +module_param(gbuffers, int, 0444); +MODULE_PARM_DESC(gbuffers,"number of capture buffers, range 2-32"); +module_param(noninterlaced, int, 0644); +MODULE_PARM_DESC(noninterlaced,"capture non interlaced video"); +module_param_string(secam, secam, sizeof(secam), 0644); +MODULE_PARM_DESC(secam, "force SECAM variant, either DK,L or Lc"); + + +#define dprintk(fmt, arg...) if (video_debug&0x04) \ + printk(KERN_DEBUG "%s/video: " fmt, dev->name , ## arg) + +/* ------------------------------------------------------------------ */ +/* Defines for Video Output Port Register at address 0x191 */ + +/* Bit 0: VIP code T bit polarity */ + +#define VP_T_CODE_P_NON_INVERTED 0x00 +#define VP_T_CODE_P_INVERTED 0x01 + +/* ------------------------------------------------------------------ */ +/* Defines for Video Output Port Register at address 0x195 */ + +/* Bit 2: Video output clock delay control */ + +#define VP_CLK_CTRL2_NOT_DELAYED 0x00 +#define VP_CLK_CTRL2_DELAYED 0x04 + +/* Bit 1: Video output clock invert control */ + +#define VP_CLK_CTRL1_NON_INVERTED 0x00 +#define VP_CLK_CTRL1_INVERTED 0x02 + +/* ------------------------------------------------------------------ */ +/* Defines for Video Output Port Register at address 0x196 */ + +/* Bits 2 to 0: VSYNC pin video vertical sync type */ + +#define VP_VS_TYPE_MASK 0x07 + +#define VP_VS_TYPE_OFF 0x00 +#define VP_VS_TYPE_V123 0x01 +#define VP_VS_TYPE_V_ITU 0x02 +#define VP_VS_TYPE_VGATE_L 0x03 +#define VP_VS_TYPE_RESERVED1 0x04 +#define VP_VS_TYPE_RESERVED2 0x05 +#define VP_VS_TYPE_F_ITU 0x06 +#define VP_VS_TYPE_SC_FID 0x07 + +/* ------------------------------------------------------------------ */ +/* data structs for video */ + +static int video_out[][9] = { + [CCIR656] = { 0x00, 0xb1, 0x00, 0xa1, 0x00, 0x04, 0x06, 0x00, 0x00 }, +}; + +static struct saa7134_format formats[] = { + { + .name = "8 bpp gray", + .fourcc = V4L2_PIX_FMT_GREY, + .depth = 8, + .pm = 0x06, + },{ + .name = "15 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB555, + .depth = 16, + .pm = 0x13 | 0x80, + },{ + .name = "15 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB555X, + .depth = 16, + .pm = 0x13 | 0x80, + .bswap = 1, + },{ + .name = "16 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .pm = 0x10 | 0x80, + },{ + .name = "16 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB565X, + .depth = 16, + .pm = 0x10 | 0x80, + .bswap = 1, + },{ + .name = "24 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR24, + .depth = 24, + .pm = 0x11, + },{ + .name = "24 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB24, + .depth = 24, + .pm = 0x11, + .bswap = 1, + },{ + .name = "32 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR32, + .depth = 32, + .pm = 0x12, + },{ + .name = "32 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB32, + .depth = 32, + .pm = 0x12, + .bswap = 1, + .wswap = 1, + },{ + .name = "4:2:2 packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + .pm = 0x00, + .bswap = 1, + .yuv = 1, + },{ + .name = "4:2:2 packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + .pm = 0x00, + .yuv = 1, + },{ + .name = "4:2:2 planar, Y-Cb-Cr", + .fourcc = V4L2_PIX_FMT_YUV422P, + .depth = 16, + .pm = 0x09, + .yuv = 1, + .planar = 1, + .hshift = 1, + .vshift = 0, + },{ + .name = "4:2:0 planar, Y-Cb-Cr", + .fourcc = V4L2_PIX_FMT_YUV420, + .depth = 12, + .pm = 0x0a, + .yuv = 1, + .planar = 1, + .hshift = 1, + .vshift = 1, + },{ + .name = "4:2:0 planar, Y-Cb-Cr", + .fourcc = V4L2_PIX_FMT_YVU420, + .depth = 12, + .pm = 0x0a, + .yuv = 1, + .planar = 1, + .uvswap = 1, + .hshift = 1, + .vshift = 1, + } +}; +#define FORMATS ARRAY_SIZE(formats) + +#define NORM_625_50 \ + .h_start = 0, \ + .h_stop = 719, \ + .video_v_start = 24, \ + .video_v_stop = 311, \ + .vbi_v_start_0 = 7, \ + .vbi_v_stop_0 = 22, \ + .vbi_v_start_1 = 319, \ + .src_timing = 4 + +#define NORM_525_60 \ + .h_start = 0, \ + .h_stop = 719, \ + .video_v_start = 23, \ + .video_v_stop = 262, \ + .vbi_v_start_0 = 10, \ + .vbi_v_stop_0 = 21, \ + .vbi_v_start_1 = 273, \ + .src_timing = 7 + +static struct saa7134_tvnorm tvnorms[] = { + { + .name = "PAL", /* autodetect */ + .id = V4L2_STD_PAL, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x40, + .chroma_ctrl1 = 0x81, + .chroma_gain = 0x2a, + .chroma_ctrl2 = 0x06, + .vgate_misc = 0x1c, + + },{ + .name = "PAL-BG", + .id = V4L2_STD_PAL_BG, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x40, + .chroma_ctrl1 = 0x81, + .chroma_gain = 0x2a, + .chroma_ctrl2 = 0x06, + .vgate_misc = 0x1c, + + },{ + .name = "PAL-I", + .id = V4L2_STD_PAL_I, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x40, + .chroma_ctrl1 = 0x81, + .chroma_gain = 0x2a, + .chroma_ctrl2 = 0x06, + .vgate_misc = 0x1c, + + },{ + .name = "PAL-DK", + .id = V4L2_STD_PAL_DK, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x40, + .chroma_ctrl1 = 0x81, + .chroma_gain = 0x2a, + .chroma_ctrl2 = 0x06, + .vgate_misc = 0x1c, + + },{ + .name = "NTSC", + .id = V4L2_STD_NTSC, + NORM_525_60, + + .sync_control = 0x59, + .luma_control = 0x40, + .chroma_ctrl1 = 0x89, + .chroma_gain = 0x2a, + .chroma_ctrl2 = 0x0e, + .vgate_misc = 0x18, + + },{ + .name = "SECAM", + .id = V4L2_STD_SECAM, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x1b, + .chroma_ctrl1 = 0xd1, + .chroma_gain = 0x80, + .chroma_ctrl2 = 0x00, + .vgate_misc = 0x1c, + + },{ + .name = "SECAM-DK", + .id = V4L2_STD_SECAM_DK, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x1b, + .chroma_ctrl1 = 0xd1, + .chroma_gain = 0x80, + .chroma_ctrl2 = 0x00, + .vgate_misc = 0x1c, + + },{ + .name = "SECAM-L", + .id = V4L2_STD_SECAM_L, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x1b, + .chroma_ctrl1 = 0xd1, + .chroma_gain = 0x80, + .chroma_ctrl2 = 0x00, + .vgate_misc = 0x1c, + + },{ + .name = "SECAM-Lc", + .id = V4L2_STD_SECAM_LC, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x1b, + .chroma_ctrl1 = 0xd1, + .chroma_gain = 0x80, + .chroma_ctrl2 = 0x00, + .vgate_misc = 0x1c, + + },{ + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + NORM_525_60, + + .sync_control = 0x59, + .luma_control = 0x40, + .chroma_ctrl1 = 0xb9, + .chroma_gain = 0x2a, + .chroma_ctrl2 = 0x0e, + .vgate_misc = 0x18, + + },{ + .name = "PAL-Nc", + .id = V4L2_STD_PAL_Nc, + NORM_625_50, + + .sync_control = 0x18, + .luma_control = 0x40, + .chroma_ctrl1 = 0xa1, + .chroma_gain = 0x2a, + .chroma_ctrl2 = 0x06, + .vgate_misc = 0x1c, + + },{ + .name = "PAL-60", + .id = V4L2_STD_PAL_60, + + .h_start = 0, + .h_stop = 719, + .video_v_start = 23, + .video_v_stop = 262, + .vbi_v_start_0 = 10, + .vbi_v_stop_0 = 21, + .vbi_v_start_1 = 273, + .src_timing = 7, + + .sync_control = 0x18, + .luma_control = 0x40, + .chroma_ctrl1 = 0x81, + .chroma_gain = 0x2a, + .chroma_ctrl2 = 0x06, + .vgate_misc = 0x1c, + } +}; +#define TVNORMS ARRAY_SIZE(tvnorms) + +#define V4L2_CID_PRIVATE_INVERT (V4L2_CID_PRIVATE_BASE + 0) +#define V4L2_CID_PRIVATE_Y_ODD (V4L2_CID_PRIVATE_BASE + 1) +#define V4L2_CID_PRIVATE_Y_EVEN (V4L2_CID_PRIVATE_BASE + 2) +#define V4L2_CID_PRIVATE_AUTOMUTE (V4L2_CID_PRIVATE_BASE + 3) +#define V4L2_CID_PRIVATE_LASTP1 (V4L2_CID_PRIVATE_BASE + 4) + +static const struct v4l2_queryctrl no_ctrl = { + .name = "42", + .flags = V4L2_CTRL_FLAG_DISABLED, +}; +static const struct v4l2_queryctrl video_ctrls[] = { + /* --- video --- */ + { + .id = V4L2_CID_BRIGHTNESS, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 128, + .type = V4L2_CTRL_TYPE_INTEGER, + },{ + .id = V4L2_CID_CONTRAST, + .name = "Contrast", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 68, + .type = V4L2_CTRL_TYPE_INTEGER, + },{ + .id = V4L2_CID_SATURATION, + .name = "Saturation", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 64, + .type = V4L2_CTRL_TYPE_INTEGER, + },{ + .id = V4L2_CID_HUE, + .name = "Hue", + .minimum = -128, + .maximum = 127, + .step = 1, + .default_value = 0, + .type = V4L2_CTRL_TYPE_INTEGER, + },{ + .id = V4L2_CID_HFLIP, + .name = "Mirror", + .minimum = 0, + .maximum = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + }, + /* --- audio --- */ + { + .id = V4L2_CID_AUDIO_MUTE, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + },{ + .id = V4L2_CID_AUDIO_VOLUME, + .name = "Volume", + .minimum = -15, + .maximum = 15, + .step = 1, + .default_value = 0, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + /* --- private --- */ + { + .id = V4L2_CID_PRIVATE_INVERT, + .name = "Invert", + .minimum = 0, + .maximum = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + },{ + .id = V4L2_CID_PRIVATE_Y_ODD, + .name = "y offset odd field", + .minimum = 0, + .maximum = 128, + .step = 1, + .default_value = 0, + .type = V4L2_CTRL_TYPE_INTEGER, + },{ + .id = V4L2_CID_PRIVATE_Y_EVEN, + .name = "y offset even field", + .minimum = 0, + .maximum = 128, + .step = 1, + .default_value = 0, + .type = V4L2_CTRL_TYPE_INTEGER, + },{ + .id = V4L2_CID_PRIVATE_AUTOMUTE, + .name = "automute", + .minimum = 0, + .maximum = 1, + .default_value = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + } +}; +static const unsigned int CTRLS = ARRAY_SIZE(video_ctrls); + +static const struct v4l2_queryctrl* ctrl_by_id(unsigned int id) +{ + unsigned int i; + + for (i = 0; i < CTRLS; i++) + if (video_ctrls[i].id == id) + return video_ctrls+i; + return NULL; +} + +static struct saa7134_format* format_by_fourcc(unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < FORMATS; i++) + if (formats[i].fourcc == fourcc) + return formats+i; + return NULL; +} + +/* ----------------------------------------------------------------------- */ +/* resource management */ + +static int res_get(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int bit) +{ + if (fh->resources & bit) + /* have it already allocated */ + return 1; + + /* is it free? */ + mutex_lock(&dev->lock); + if (dev->resources & bit) { + /* no, someone else uses it */ + mutex_unlock(&dev->lock); + return 0; + } + /* it's free, grab it */ + fh->resources |= bit; + dev->resources |= bit; + dprintk("res: get %d\n",bit); + mutex_unlock(&dev->lock); + return 1; +} + +static int res_check(struct saa7134_fh *fh, unsigned int bit) +{ + return (fh->resources & bit); +} + +static int res_locked(struct saa7134_dev *dev, unsigned int bit) +{ + return (dev->resources & bit); +} + +static +void res_free(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int bits) +{ + BUG_ON((fh->resources & bits) != bits); + + mutex_lock(&dev->lock); + fh->resources &= ~bits; + dev->resources &= ~bits; + dprintk("res: put %d\n",bits); + mutex_unlock(&dev->lock); +} + +/* ------------------------------------------------------------------ */ + +static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm) +{ + dprintk("set tv norm = %s\n",norm->name); + dev->tvnorm = norm; + + /* setup cropping */ + dev->crop_bounds.left = norm->h_start; + dev->crop_defrect.left = norm->h_start; + dev->crop_bounds.width = norm->h_stop - norm->h_start +1; + dev->crop_defrect.width = norm->h_stop - norm->h_start +1; + + dev->crop_bounds.top = (norm->vbi_v_stop_0+1)*2; + dev->crop_defrect.top = norm->video_v_start*2; + dev->crop_bounds.height = ((norm->id & V4L2_STD_525_60) ? 524 : 624) + - dev->crop_bounds.top; + dev->crop_defrect.height = (norm->video_v_stop - norm->video_v_start +1)*2; + + dev->crop_current = dev->crop_defrect; + + saa7134_set_tvnorm_hw(dev); +} + +static void video_mux(struct saa7134_dev *dev, int input) +{ + dprintk("video input = %d [%s]\n", input, card_in(dev, input).name); + dev->ctl_input = input; + set_tvnorm(dev, dev->tvnorm); + saa7134_tvaudio_setinput(dev, &card_in(dev, input)); +} + + +static void saa7134_set_decoder(struct saa7134_dev *dev) +{ + int luma_control, sync_control, mux; + + struct saa7134_tvnorm *norm = dev->tvnorm; + mux = card_in(dev, dev->ctl_input).vmux; + + luma_control = norm->luma_control; + sync_control = norm->sync_control; + + if (mux > 5) + luma_control |= 0x80; /* svideo */ + if (noninterlaced || dev->nosignal) + sync_control |= 0x20; + + /* setup video decoder */ + saa_writeb(SAA7134_INCR_DELAY, 0x08); + saa_writeb(SAA7134_ANALOG_IN_CTRL1, 0xc0 | mux); + saa_writeb(SAA7134_ANALOG_IN_CTRL2, 0x00); + + saa_writeb(SAA7134_ANALOG_IN_CTRL3, 0x90); + saa_writeb(SAA7134_ANALOG_IN_CTRL4, 0x90); + saa_writeb(SAA7134_HSYNC_START, 0xeb); + saa_writeb(SAA7134_HSYNC_STOP, 0xe0); + saa_writeb(SAA7134_SOURCE_TIMING1, norm->src_timing); + + saa_writeb(SAA7134_SYNC_CTRL, sync_control); + saa_writeb(SAA7134_LUMA_CTRL, luma_control); + saa_writeb(SAA7134_DEC_LUMA_BRIGHT, dev->ctl_bright); + + saa_writeb(SAA7134_DEC_LUMA_CONTRAST, + dev->ctl_invert ? -dev->ctl_contrast : dev->ctl_contrast); + + saa_writeb(SAA7134_DEC_CHROMA_SATURATION, + dev->ctl_invert ? -dev->ctl_saturation : dev->ctl_saturation); + + saa_writeb(SAA7134_DEC_CHROMA_HUE, dev->ctl_hue); + saa_writeb(SAA7134_CHROMA_CTRL1, norm->chroma_ctrl1); + saa_writeb(SAA7134_CHROMA_GAIN, norm->chroma_gain); + + saa_writeb(SAA7134_CHROMA_CTRL2, norm->chroma_ctrl2); + saa_writeb(SAA7134_MODE_DELAY_CTRL, 0x00); + + saa_writeb(SAA7134_ANALOG_ADC, 0x01); + saa_writeb(SAA7134_VGATE_START, 0x11); + saa_writeb(SAA7134_VGATE_STOP, 0xfe); + saa_writeb(SAA7134_MISC_VGATE_MSB, norm->vgate_misc); + saa_writeb(SAA7134_RAW_DATA_GAIN, 0x40); + saa_writeb(SAA7134_RAW_DATA_OFFSET, 0x80); +} + +void saa7134_set_tvnorm_hw(struct saa7134_dev *dev) +{ + saa7134_set_decoder(dev); + + if (card_in(dev, dev->ctl_input).tv) + saa_call_all(dev, core, s_std, dev->tvnorm->id); + /* Set the correct norm for the saa6752hs. This function + does nothing if there is no saa6752hs. */ + saa_call_empress(dev, core, s_std, dev->tvnorm->id); +} + +static void set_h_prescale(struct saa7134_dev *dev, int task, int prescale) +{ + static const struct { + int xpsc; + int xacl; + int xc2_1; + int xdcg; + int vpfy; + } vals[] = { + /* XPSC XACL XC2_1 XDCG VPFY */ + { 1, 0, 0, 0, 0 }, + { 2, 2, 1, 2, 2 }, + { 3, 4, 1, 3, 2 }, + { 4, 8, 1, 4, 2 }, + { 5, 8, 1, 4, 2 }, + { 6, 8, 1, 4, 3 }, + { 7, 8, 1, 4, 3 }, + { 8, 15, 0, 4, 3 }, + { 9, 15, 0, 4, 3 }, + { 10, 16, 1, 5, 3 }, + }; + static const int count = ARRAY_SIZE(vals); + int i; + + for (i = 0; i < count; i++) + if (vals[i].xpsc == prescale) + break; + if (i == count) + return; + + saa_writeb(SAA7134_H_PRESCALE(task), vals[i].xpsc); + saa_writeb(SAA7134_ACC_LENGTH(task), vals[i].xacl); + saa_writeb(SAA7134_LEVEL_CTRL(task), + (vals[i].xc2_1 << 3) | (vals[i].xdcg)); + saa_andorb(SAA7134_FIR_PREFILTER_CTRL(task), 0x0f, + (vals[i].vpfy << 2) | vals[i].vpfy); +} + +static void set_v_scale(struct saa7134_dev *dev, int task, int yscale) +{ + int val,mirror; + + saa_writeb(SAA7134_V_SCALE_RATIO1(task), yscale & 0xff); + saa_writeb(SAA7134_V_SCALE_RATIO2(task), yscale >> 8); + + mirror = (dev->ctl_mirror) ? 0x02 : 0x00; + if (yscale < 2048) { + /* LPI */ + dprintk("yscale LPI yscale=%d\n",yscale); + saa_writeb(SAA7134_V_FILTER(task), 0x00 | mirror); + saa_writeb(SAA7134_LUMA_CONTRAST(task), 0x40); + saa_writeb(SAA7134_CHROMA_SATURATION(task), 0x40); + } else { + /* ACM */ + val = 0x40 * 1024 / yscale; + dprintk("yscale ACM yscale=%d val=0x%x\n",yscale,val); + saa_writeb(SAA7134_V_FILTER(task), 0x01 | mirror); + saa_writeb(SAA7134_LUMA_CONTRAST(task), val); + saa_writeb(SAA7134_CHROMA_SATURATION(task), val); + } + saa_writeb(SAA7134_LUMA_BRIGHT(task), 0x80); +} + +static void set_size(struct saa7134_dev *dev, int task, + int width, int height, int interlace) +{ + int prescale,xscale,yscale,y_even,y_odd; + int h_start, h_stop, v_start, v_stop; + int div = interlace ? 2 : 1; + + /* setup video scaler */ + h_start = dev->crop_current.left; + v_start = dev->crop_current.top/2; + h_stop = (dev->crop_current.left + dev->crop_current.width -1); + v_stop = (dev->crop_current.top + dev->crop_current.height -1)/2; + + saa_writeb(SAA7134_VIDEO_H_START1(task), h_start & 0xff); + saa_writeb(SAA7134_VIDEO_H_START2(task), h_start >> 8); + saa_writeb(SAA7134_VIDEO_H_STOP1(task), h_stop & 0xff); + saa_writeb(SAA7134_VIDEO_H_STOP2(task), h_stop >> 8); + saa_writeb(SAA7134_VIDEO_V_START1(task), v_start & 0xff); + saa_writeb(SAA7134_VIDEO_V_START2(task), v_start >> 8); + saa_writeb(SAA7134_VIDEO_V_STOP1(task), v_stop & 0xff); + saa_writeb(SAA7134_VIDEO_V_STOP2(task), v_stop >> 8); + + prescale = dev->crop_current.width / width; + if (0 == prescale) + prescale = 1; + xscale = 1024 * dev->crop_current.width / prescale / width; + yscale = 512 * div * dev->crop_current.height / height; + dprintk("prescale=%d xscale=%d yscale=%d\n",prescale,xscale,yscale); + set_h_prescale(dev,task,prescale); + saa_writeb(SAA7134_H_SCALE_INC1(task), xscale & 0xff); + saa_writeb(SAA7134_H_SCALE_INC2(task), xscale >> 8); + set_v_scale(dev,task,yscale); + + saa_writeb(SAA7134_VIDEO_PIXELS1(task), width & 0xff); + saa_writeb(SAA7134_VIDEO_PIXELS2(task), width >> 8); + saa_writeb(SAA7134_VIDEO_LINES1(task), height/div & 0xff); + saa_writeb(SAA7134_VIDEO_LINES2(task), height/div >> 8); + + /* deinterlace y offsets */ + y_odd = dev->ctl_y_odd; + y_even = dev->ctl_y_even; + saa_writeb(SAA7134_V_PHASE_OFFSET0(task), y_odd); + saa_writeb(SAA7134_V_PHASE_OFFSET1(task), y_even); + saa_writeb(SAA7134_V_PHASE_OFFSET2(task), y_odd); + saa_writeb(SAA7134_V_PHASE_OFFSET3(task), y_even); +} + +/* ------------------------------------------------------------------ */ + +struct cliplist { + __u16 position; + __u8 enable; + __u8 disable; +}; + +static void set_cliplist(struct saa7134_dev *dev, int reg, + struct cliplist *cl, int entries, char *name) +{ + __u8 winbits = 0; + int i; + + for (i = 0; i < entries; i++) { + winbits |= cl[i].enable; + winbits &= ~cl[i].disable; + if (i < 15 && cl[i].position == cl[i+1].position) + continue; + saa_writeb(reg + 0, winbits); + saa_writeb(reg + 2, cl[i].position & 0xff); + saa_writeb(reg + 3, cl[i].position >> 8); + dprintk("clip: %s winbits=%02x pos=%d\n", + name,winbits,cl[i].position); + reg += 8; + } + for (; reg < 0x400; reg += 8) { + saa_writeb(reg+ 0, 0); + saa_writeb(reg + 1, 0); + saa_writeb(reg + 2, 0); + saa_writeb(reg + 3, 0); + } +} + +static int clip_range(int val) +{ + if (val < 0) + val = 0; + return val; +} + +/* Sort into smallest position first order */ +static int cliplist_cmp(const void *a, const void *b) +{ + const struct cliplist *cla = a; + const struct cliplist *clb = b; + if (cla->position < clb->position) + return -1; + if (cla->position > clb->position) + return 1; + return 0; +} + +static int setup_clipping(struct saa7134_dev *dev, struct v4l2_clip *clips, + int nclips, int interlace) +{ + struct cliplist col[16], row[16]; + int cols = 0, rows = 0, i; + int div = interlace ? 2 : 1; + + memset(col, 0, sizeof(col)); + memset(row, 0, sizeof(row)); + for (i = 0; i < nclips && i < 8; i++) { + col[cols].position = clip_range(clips[i].c.left); + col[cols].enable = (1 << i); + cols++; + col[cols].position = clip_range(clips[i].c.left+clips[i].c.width); + col[cols].disable = (1 << i); + cols++; + row[rows].position = clip_range(clips[i].c.top / div); + row[rows].enable = (1 << i); + rows++; + row[rows].position = clip_range((clips[i].c.top + clips[i].c.height) + / div); + row[rows].disable = (1 << i); + rows++; + } + sort(col, cols, sizeof col[0], cliplist_cmp, NULL); + sort(row, rows, sizeof row[0], cliplist_cmp, NULL); + set_cliplist(dev,0x380,col,cols,"cols"); + set_cliplist(dev,0x384,row,rows,"rows"); + return 0; +} + +static int verify_preview(struct saa7134_dev *dev, struct v4l2_window *win) +{ + enum v4l2_field field; + int maxw, maxh; + + if (NULL == dev->ovbuf.base) + return -EINVAL; + if (NULL == dev->ovfmt) + return -EINVAL; + if (win->w.width < 48 || win->w.height < 32) + return -EINVAL; + if (win->clipcount > 2048) + return -EINVAL; + + field = win->field; + maxw = dev->crop_current.width; + maxh = dev->crop_current.height; + + if (V4L2_FIELD_ANY == field) { + field = (win->w.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_TOP; + } + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } + + win->field = field; + if (win->w.width > maxw) + win->w.width = maxw; + if (win->w.height > maxh) + win->w.height = maxh; + return 0; +} + +static int start_preview(struct saa7134_dev *dev, struct saa7134_fh *fh) +{ + unsigned long base,control,bpl; + int err; + + err = verify_preview(dev,&fh->win); + if (0 != err) + return err; + + dev->ovfield = fh->win.field; + dprintk("start_preview %dx%d+%d+%d %s field=%s\n", + fh->win.w.width,fh->win.w.height, + fh->win.w.left,fh->win.w.top, + dev->ovfmt->name,v4l2_field_names[dev->ovfield]); + + /* setup window + clipping */ + set_size(dev,TASK_B,fh->win.w.width,fh->win.w.height, + V4L2_FIELD_HAS_BOTH(dev->ovfield)); + setup_clipping(dev,fh->clips,fh->nclips, + V4L2_FIELD_HAS_BOTH(dev->ovfield)); + if (dev->ovfmt->yuv) + saa_andorb(SAA7134_DATA_PATH(TASK_B), 0x3f, 0x03); + else + saa_andorb(SAA7134_DATA_PATH(TASK_B), 0x3f, 0x01); + saa_writeb(SAA7134_OFMT_VIDEO_B, dev->ovfmt->pm | 0x20); + + /* dma: setup channel 1 (= Video Task B) */ + base = (unsigned long)dev->ovbuf.base; + base += dev->ovbuf.fmt.bytesperline * fh->win.w.top; + base += dev->ovfmt->depth/8 * fh->win.w.left; + bpl = dev->ovbuf.fmt.bytesperline; + control = SAA7134_RS_CONTROL_BURST_16; + if (dev->ovfmt->bswap) + control |= SAA7134_RS_CONTROL_BSWAP; + if (dev->ovfmt->wswap) + control |= SAA7134_RS_CONTROL_WSWAP; + if (V4L2_FIELD_HAS_BOTH(dev->ovfield)) { + saa_writel(SAA7134_RS_BA1(1),base); + saa_writel(SAA7134_RS_BA2(1),base+bpl); + saa_writel(SAA7134_RS_PITCH(1),bpl*2); + saa_writel(SAA7134_RS_CONTROL(1),control); + } else { + saa_writel(SAA7134_RS_BA1(1),base); + saa_writel(SAA7134_RS_BA2(1),base); + saa_writel(SAA7134_RS_PITCH(1),bpl); + saa_writel(SAA7134_RS_CONTROL(1),control); + } + + /* start dma */ + dev->ovenable = 1; + saa7134_set_dmabits(dev); + + return 0; +} + +static int stop_preview(struct saa7134_dev *dev, struct saa7134_fh *fh) +{ + dev->ovenable = 0; + saa7134_set_dmabits(dev); + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int buffer_activate(struct saa7134_dev *dev, + struct saa7134_buf *buf, + struct saa7134_buf *next) +{ + unsigned long base,control,bpl; + unsigned long bpl_uv,lines_uv,base2,base3,tmp; /* planar */ + + dprintk("buffer_activate buf=%p\n",buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->top_seen = 0; + + set_size(dev,TASK_A,buf->vb.width,buf->vb.height, + V4L2_FIELD_HAS_BOTH(buf->vb.field)); + if (buf->fmt->yuv) + saa_andorb(SAA7134_DATA_PATH(TASK_A), 0x3f, 0x03); + else + saa_andorb(SAA7134_DATA_PATH(TASK_A), 0x3f, 0x01); + saa_writeb(SAA7134_OFMT_VIDEO_A, buf->fmt->pm); + + /* DMA: setup channel 0 (= Video Task A0) */ + base = saa7134_buffer_base(buf); + if (buf->fmt->planar) + bpl = buf->vb.width; + else + bpl = (buf->vb.width * buf->fmt->depth) / 8; + control = SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (buf->pt->dma >> 12); + if (buf->fmt->bswap) + control |= SAA7134_RS_CONTROL_BSWAP; + if (buf->fmt->wswap) + control |= SAA7134_RS_CONTROL_WSWAP; + if (V4L2_FIELD_HAS_BOTH(buf->vb.field)) { + /* interlaced */ + saa_writel(SAA7134_RS_BA1(0),base); + saa_writel(SAA7134_RS_BA2(0),base+bpl); + saa_writel(SAA7134_RS_PITCH(0),bpl*2); + } else { + /* non-interlaced */ + saa_writel(SAA7134_RS_BA1(0),base); + saa_writel(SAA7134_RS_BA2(0),base); + saa_writel(SAA7134_RS_PITCH(0),bpl); + } + saa_writel(SAA7134_RS_CONTROL(0),control); + + if (buf->fmt->planar) { + /* DMA: setup channel 4+5 (= planar task A) */ + bpl_uv = bpl >> buf->fmt->hshift; + lines_uv = buf->vb.height >> buf->fmt->vshift; + base2 = base + bpl * buf->vb.height; + base3 = base2 + bpl_uv * lines_uv; + if (buf->fmt->uvswap) + tmp = base2, base2 = base3, base3 = tmp; + dprintk("uv: bpl=%ld lines=%ld base2/3=%ld/%ld\n", + bpl_uv,lines_uv,base2,base3); + if (V4L2_FIELD_HAS_BOTH(buf->vb.field)) { + /* interlaced */ + saa_writel(SAA7134_RS_BA1(4),base2); + saa_writel(SAA7134_RS_BA2(4),base2+bpl_uv); + saa_writel(SAA7134_RS_PITCH(4),bpl_uv*2); + saa_writel(SAA7134_RS_BA1(5),base3); + saa_writel(SAA7134_RS_BA2(5),base3+bpl_uv); + saa_writel(SAA7134_RS_PITCH(5),bpl_uv*2); + } else { + /* non-interlaced */ + saa_writel(SAA7134_RS_BA1(4),base2); + saa_writel(SAA7134_RS_BA2(4),base2); + saa_writel(SAA7134_RS_PITCH(4),bpl_uv); + saa_writel(SAA7134_RS_BA1(5),base3); + saa_writel(SAA7134_RS_BA2(5),base3); + saa_writel(SAA7134_RS_PITCH(5),bpl_uv); + } + saa_writel(SAA7134_RS_CONTROL(4),control); + saa_writel(SAA7134_RS_CONTROL(5),control); + } + + /* start DMA */ + saa7134_set_dmabits(dev); + mod_timer(&dev->video_q.timeout, jiffies+BUFFER_TIMEOUT); + return 0; +} + +static int buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct saa7134_fh *fh = q->priv_data; + struct saa7134_dev *dev = fh->dev; + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + unsigned int size; + int err; + + /* sanity checks */ + if (NULL == fh->fmt) + return -EINVAL; + if (fh->width < 48 || + fh->height < 32 || + fh->width/4 > dev->crop_current.width || + fh->height/4 > dev->crop_current.height || + fh->width > dev->crop_bounds.width || + fh->height > dev->crop_bounds.height) + return -EINVAL; + size = (fh->width * fh->height * fh->fmt->depth) >> 3; + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + dprintk("buffer_prepare [%d,size=%dx%d,bytes=%d,fields=%s,%s]\n", + vb->i,fh->width,fh->height,size,v4l2_field_names[field], + fh->fmt->name); + if (buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.size != size || + buf->vb.field != field || + buf->fmt != fh->fmt) { + saa7134_dma_free(q,buf); + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.size = size; + buf->vb.field = field; + buf->fmt = fh->fmt; + buf->pt = &fh->pt_cap; + dev->video_q.curr = NULL; + + err = videobuf_iolock(q,&buf->vb,&dev->ovbuf); + if (err) + goto oops; + err = saa7134_pgtable_build(dev->pci,buf->pt, + dma->sglist, + dma->sglen, + saa7134_buffer_startpage(buf)); + if (err) + goto oops; + } + buf->vb.state = VIDEOBUF_PREPARED; + buf->activate = buffer_activate; + return 0; + + oops: + saa7134_dma_free(q,buf); + return err; +} + +static int +buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + struct saa7134_fh *fh = q->priv_data; + + *size = fh->fmt->depth * fh->width * fh->height >> 3; + if (0 == *count) + *count = gbuffers; + *count = saa7134_buffer_count(*size,*count); + return 0; +} + +static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct saa7134_fh *fh = q->priv_data; + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + + saa7134_buffer_queue(fh->dev,&fh->dev->video_q,buf); +} + +static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + + saa7134_dma_free(q,buf); +} + +static struct videobuf_queue_ops video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* ------------------------------------------------------------------ */ + +int saa7134_g_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c) +{ + const struct v4l2_queryctrl* ctrl; + + ctrl = ctrl_by_id(c->id); + if (NULL == ctrl) + return -EINVAL; + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + c->value = dev->ctl_bright; + break; + case V4L2_CID_HUE: + c->value = dev->ctl_hue; + break; + case V4L2_CID_CONTRAST: + c->value = dev->ctl_contrast; + break; + case V4L2_CID_SATURATION: + c->value = dev->ctl_saturation; + break; + case V4L2_CID_AUDIO_MUTE: + c->value = dev->ctl_mute; + break; + case V4L2_CID_AUDIO_VOLUME: + c->value = dev->ctl_volume; + break; + case V4L2_CID_PRIVATE_INVERT: + c->value = dev->ctl_invert; + break; + case V4L2_CID_HFLIP: + c->value = dev->ctl_mirror; + break; + case V4L2_CID_PRIVATE_Y_EVEN: + c->value = dev->ctl_y_even; + break; + case V4L2_CID_PRIVATE_Y_ODD: + c->value = dev->ctl_y_odd; + break; + case V4L2_CID_PRIVATE_AUTOMUTE: + c->value = dev->ctl_automute; + break; + default: + return -EINVAL; + } + return 0; +} +EXPORT_SYMBOL_GPL(saa7134_g_ctrl_internal); + +static int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c) +{ + struct saa7134_fh *fh = priv; + + return saa7134_g_ctrl_internal(fh->dev, fh, c); +} + +int saa7134_s_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c) +{ + const struct v4l2_queryctrl* ctrl; + unsigned long flags; + int restart_overlay = 0; + int err; + + err = -EINVAL; + + mutex_lock(&dev->lock); + + ctrl = ctrl_by_id(c->id); + if (NULL == ctrl) + goto error; + + dprintk("set_control name=%s val=%d\n",ctrl->name,c->value); + switch (ctrl->type) { + case V4L2_CTRL_TYPE_BOOLEAN: + case V4L2_CTRL_TYPE_MENU: + case V4L2_CTRL_TYPE_INTEGER: + if (c->value < ctrl->minimum) + c->value = ctrl->minimum; + if (c->value > ctrl->maximum) + c->value = ctrl->maximum; + break; + default: + /* nothing */; + } + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + dev->ctl_bright = c->value; + saa_writeb(SAA7134_DEC_LUMA_BRIGHT, dev->ctl_bright); + break; + case V4L2_CID_HUE: + dev->ctl_hue = c->value; + saa_writeb(SAA7134_DEC_CHROMA_HUE, dev->ctl_hue); + break; + case V4L2_CID_CONTRAST: + dev->ctl_contrast = c->value; + saa_writeb(SAA7134_DEC_LUMA_CONTRAST, + dev->ctl_invert ? -dev->ctl_contrast : dev->ctl_contrast); + break; + case V4L2_CID_SATURATION: + dev->ctl_saturation = c->value; + saa_writeb(SAA7134_DEC_CHROMA_SATURATION, + dev->ctl_invert ? -dev->ctl_saturation : dev->ctl_saturation); + break; + case V4L2_CID_AUDIO_MUTE: + dev->ctl_mute = c->value; + saa7134_tvaudio_setmute(dev); + break; + case V4L2_CID_AUDIO_VOLUME: + dev->ctl_volume = c->value; + saa7134_tvaudio_setvolume(dev,dev->ctl_volume); + break; + case V4L2_CID_PRIVATE_INVERT: + dev->ctl_invert = c->value; + saa_writeb(SAA7134_DEC_LUMA_CONTRAST, + dev->ctl_invert ? -dev->ctl_contrast : dev->ctl_contrast); + saa_writeb(SAA7134_DEC_CHROMA_SATURATION, + dev->ctl_invert ? -dev->ctl_saturation : dev->ctl_saturation); + break; + case V4L2_CID_HFLIP: + dev->ctl_mirror = c->value; + restart_overlay = 1; + break; + case V4L2_CID_PRIVATE_Y_EVEN: + dev->ctl_y_even = c->value; + restart_overlay = 1; + break; + case V4L2_CID_PRIVATE_Y_ODD: + dev->ctl_y_odd = c->value; + restart_overlay = 1; + break; + case V4L2_CID_PRIVATE_AUTOMUTE: + { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &dev->tda9887_conf; + + dev->ctl_automute = c->value; + if (dev->tda9887_conf) { + if (dev->ctl_automute) + dev->tda9887_conf |= TDA9887_AUTOMUTE; + else + dev->tda9887_conf &= ~TDA9887_AUTOMUTE; + + saa_call_all(dev, tuner, s_config, &tda9887_cfg); + } + break; + } + default: + goto error; + } + if (restart_overlay && fh && res_check(fh, RESOURCE_OVERLAY)) { + spin_lock_irqsave(&dev->slock,flags); + stop_preview(dev,fh); + start_preview(dev,fh); + spin_unlock_irqrestore(&dev->slock,flags); + } + err = 0; + +error: + mutex_unlock(&dev->lock); + return err; +} +EXPORT_SYMBOL_GPL(saa7134_s_ctrl_internal); + +static int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c) +{ + struct saa7134_fh *fh = f; + + return saa7134_s_ctrl_internal(fh->dev, fh, c); +} + +/* ------------------------------------------------------------------ */ + +static struct videobuf_queue* saa7134_queue(struct saa7134_fh *fh) +{ + struct videobuf_queue* q = NULL; + + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + q = &fh->cap; + break; + case V4L2_BUF_TYPE_VBI_CAPTURE: + q = &fh->vbi; + break; + default: + BUG(); + } + return q; +} + +static int saa7134_resource(struct saa7134_fh *fh) +{ + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + return RESOURCE_VIDEO; + + if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) + return RESOURCE_VBI; + + BUG(); + return 0; +} + +static int video_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct saa7134_dev *dev = video_drvdata(file); + struct saa7134_fh *fh; + enum v4l2_buf_type type = 0; + int radio = 0; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + break; + case VFL_TYPE_VBI: + type = V4L2_BUF_TYPE_VBI_CAPTURE; + break; + case VFL_TYPE_RADIO: + radio = 1; + break; + } + + dprintk("open dev=%s radio=%d type=%s\n", video_device_node_name(vdev), + radio, v4l2_type_names[type]); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh),GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + + v4l2_fh_init(&fh->fh, vdev); + file->private_data = fh; + fh->dev = dev; + fh->radio = radio; + fh->type = type; + fh->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); + fh->width = 720; + fh->height = 576; + + videobuf_queue_sg_init(&fh->cap, &video_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct saa7134_buf), + fh, NULL); + videobuf_queue_sg_init(&fh->vbi, &saa7134_vbi_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_FIELD_SEQ_TB, + sizeof(struct saa7134_buf), + fh, NULL); + saa7134_pgtable_alloc(dev->pci,&fh->pt_cap); + saa7134_pgtable_alloc(dev->pci,&fh->pt_vbi); + + if (fh->radio) { + /* switch to radio mode */ + saa7134_tvaudio_setinput(dev,&card(dev).radio); + saa_call_all(dev, tuner, s_radio); + } else { + /* switch to video/vbi mode */ + video_mux(dev,dev->ctl_input); + } + v4l2_fh_add(&fh->fh); + + return 0; +} + +static ssize_t +video_read(struct file *file, char __user *data, size_t count, loff_t *ppos) +{ + struct saa7134_fh *fh = file->private_data; + + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (res_locked(fh->dev,RESOURCE_VIDEO)) + return -EBUSY; + return videobuf_read_one(saa7134_queue(fh), + data, count, ppos, + file->f_flags & O_NONBLOCK); + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (!res_get(fh->dev,fh,RESOURCE_VBI)) + return -EBUSY; + return videobuf_read_stream(saa7134_queue(fh), + data, count, ppos, 1, + file->f_flags & O_NONBLOCK); + break; + default: + BUG(); + return 0; + } +} + +static unsigned int +video_poll(struct file *file, struct poll_table_struct *wait) +{ + struct saa7134_fh *fh = file->private_data; + struct videobuf_buffer *buf = NULL; + unsigned int rc = 0; + + if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) + return videobuf_poll_stream(file, &fh->vbi, wait); + + if (res_check(fh,RESOURCE_VIDEO)) { + mutex_lock(&fh->cap.vb_lock); + if (!list_empty(&fh->cap.stream)) + buf = list_entry(fh->cap.stream.next, struct videobuf_buffer, stream); + } else { + mutex_lock(&fh->cap.vb_lock); + if (UNSET == fh->cap.read_off) { + /* need to capture a new frame */ + if (res_locked(fh->dev,RESOURCE_VIDEO)) + goto err; + if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,fh->cap.field)) + goto err; + fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf); + fh->cap.read_off = 0; + } + buf = fh->cap.read_buf; + } + + if (!buf) + goto err; + + poll_wait(file, &buf->done, wait); + if (buf->state == VIDEOBUF_DONE || + buf->state == VIDEOBUF_ERROR) + rc = POLLIN|POLLRDNORM; + mutex_unlock(&fh->cap.vb_lock); + return rc; + +err: + mutex_unlock(&fh->cap.vb_lock); + return POLLERR; +} + +static int video_release(struct file *file) +{ + struct saa7134_fh *fh = file->private_data; + struct saa7134_dev *dev = fh->dev; + struct saa6588_command cmd; + unsigned long flags; + + saa7134_tvaudio_close(dev); + + /* turn off overlay */ + if (res_check(fh, RESOURCE_OVERLAY)) { + spin_lock_irqsave(&dev->slock,flags); + stop_preview(dev,fh); + spin_unlock_irqrestore(&dev->slock,flags); + res_free(dev,fh,RESOURCE_OVERLAY); + } + + /* stop video capture */ + if (res_check(fh, RESOURCE_VIDEO)) { + videobuf_streamoff(&fh->cap); + res_free(dev,fh,RESOURCE_VIDEO); + } + if (fh->cap.read_buf) { + buffer_release(&fh->cap,fh->cap.read_buf); + kfree(fh->cap.read_buf); + } + + /* stop vbi capture */ + if (res_check(fh, RESOURCE_VBI)) { + videobuf_stop(&fh->vbi); + res_free(dev,fh,RESOURCE_VBI); + } + + /* ts-capture will not work in planar mode, so turn it off Hac: 04.05*/ + saa_andorb(SAA7134_OFMT_VIDEO_A, 0x1f, 0); + saa_andorb(SAA7134_OFMT_VIDEO_B, 0x1f, 0); + saa_andorb(SAA7134_OFMT_DATA_A, 0x1f, 0); + saa_andorb(SAA7134_OFMT_DATA_B, 0x1f, 0); + + saa_call_all(dev, core, s_power, 0); + if (fh->radio) + saa_call_all(dev, core, ioctl, SAA6588_CMD_CLOSE, &cmd); + + /* free stuff */ + videobuf_mmap_free(&fh->cap); + videobuf_mmap_free(&fh->vbi); + saa7134_pgtable_free(dev->pci,&fh->pt_cap); + saa7134_pgtable_free(dev->pci,&fh->pt_vbi); + + v4l2_fh_del(&fh->fh); + v4l2_fh_exit(&fh->fh); + file->private_data = NULL; + kfree(fh); + return 0; +} + +static int video_mmap(struct file *file, struct vm_area_struct * vma) +{ + struct saa7134_fh *fh = file->private_data; + + return videobuf_mmap_mapper(saa7134_queue(fh), vma); +} + +static ssize_t radio_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct saa7134_fh *fh = file->private_data; + struct saa7134_dev *dev = fh->dev; + struct saa6588_command cmd; + + cmd.block_count = count/3; + cmd.buffer = data; + cmd.instance = file; + cmd.result = -ENODEV; + + saa_call_all(dev, core, ioctl, SAA6588_CMD_READ, &cmd); + + return cmd.result; +} + +static unsigned int radio_poll(struct file *file, poll_table *wait) +{ + struct saa7134_fh *fh = file->private_data; + struct saa7134_dev *dev = fh->dev; + struct saa6588_command cmd; + + cmd.instance = file; + cmd.event_list = wait; + cmd.result = -ENODEV; + saa_call_all(dev, core, ioctl, SAA6588_CMD_POLL, &cmd); + + return cmd.result; +} + +/* ------------------------------------------------------------------ */ + +static int saa7134_try_get_set_fmt_vbi_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + struct saa7134_tvnorm *norm = dev->tvnorm; + + memset(&f->fmt.vbi.reserved, 0, sizeof(f->fmt.vbi.reserved)); + f->fmt.vbi.sampling_rate = 6750000 * 4; + f->fmt.vbi.samples_per_line = 2048 /* VBI_LINE_LENGTH */; + f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; + f->fmt.vbi.offset = 64 * 4; + f->fmt.vbi.start[0] = norm->vbi_v_start_0; + f->fmt.vbi.count[0] = norm->vbi_v_stop_0 - norm->vbi_v_start_0 +1; + f->fmt.vbi.start[1] = norm->vbi_v_start_1; + f->fmt.vbi.count[1] = f->fmt.vbi.count[0]; + f->fmt.vbi.flags = 0; /* VBI_UNSYNC VBI_INTERLACED */ + + return 0; +} + +static int saa7134_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->cap.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + return 0; +} + +static int saa7134_g_fmt_vid_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + + if (saa7134_no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } + f->fmt.win = fh->win; + + return 0; +} + +static int saa7134_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + struct saa7134_format *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + + field = f->fmt.pix.field; + maxw = min(dev->crop_current.width*4, dev->crop_bounds.width); + maxh = min(dev->crop_current.height*4, dev->crop_bounds.height); + + if (V4L2_FIELD_ANY == field) { + field = (f->fmt.pix.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; + } + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } + + f->fmt.pix.field = field; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.height < 32) + f->fmt.pix.height = 32; + if (f->fmt.pix.width > maxw) + f->fmt.pix.width = maxw; + if (f->fmt.pix.height > maxh) + f->fmt.pix.height = maxh; + f->fmt.pix.width &= ~0x03; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int saa7134_try_fmt_vid_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (saa7134_no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } + + return verify_preview(dev, &f->fmt.win); +} + +static int saa7134_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + int err; + + err = saa7134_try_fmt_vid_cap(file, priv, f); + if (0 != err) + return err; + + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->cap.field = f->fmt.pix.field; + return 0; +} + +static int saa7134_s_fmt_vid_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int err; + unsigned long flags; + + if (saa7134_no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } + err = verify_preview(dev, &f->fmt.win); + if (0 != err) + return err; + + mutex_lock(&dev->lock); + + fh->win = f->fmt.win; + fh->nclips = f->fmt.win.clipcount; + + if (fh->nclips > 8) + fh->nclips = 8; + + if (copy_from_user(fh->clips, f->fmt.win.clips, + sizeof(struct v4l2_clip)*fh->nclips)) { + mutex_unlock(&dev->lock); + return -EFAULT; + } + + if (res_check(fh, RESOURCE_OVERLAY)) { + spin_lock_irqsave(&dev->slock, flags); + stop_preview(dev, fh); + start_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + } + + mutex_unlock(&dev->lock); + return 0; +} + +int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c) +{ + const struct v4l2_queryctrl *ctrl; + + if ((c->id < V4L2_CID_BASE || + c->id >= V4L2_CID_LASTP1) && + (c->id < V4L2_CID_PRIVATE_BASE || + c->id >= V4L2_CID_PRIVATE_LASTP1)) + return -EINVAL; + ctrl = ctrl_by_id(c->id); + *c = (NULL != ctrl) ? *ctrl : no_ctrl; + return 0; +} +EXPORT_SYMBOL_GPL(saa7134_queryctrl); + +static int saa7134_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + unsigned int n; + + n = i->index; + if (n >= SAA7134_INPUT_MAX) + return -EINVAL; + if (NULL == card_in(dev, i->index).name) + return -EINVAL; + i->index = n; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, card_in(dev, n).name); + if (card_in(dev, n).tv) + i->type = V4L2_INPUT_TYPE_TUNER; + if (n == dev->ctl_input) { + int v1 = saa_readb(SAA7134_STATUS_VIDEO1); + int v2 = saa_readb(SAA7134_STATUS_VIDEO2); + + if (0 != (v1 & 0x40)) + i->status |= V4L2_IN_ST_NO_H_LOCK; + if (0 != (v2 & 0x40)) + i->status |= V4L2_IN_ST_NO_SYNC; + if (0 != (v2 & 0x0e)) + i->status |= V4L2_IN_ST_MACROVISION; + } + i->std = SAA7134_NORMS; + return 0; +} + +static int saa7134_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + *i = dev->ctl_input; + return 0; +} + +static int saa7134_s_input(struct file *file, void *priv, unsigned int i) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (i >= SAA7134_INPUT_MAX) + return -EINVAL; + if (NULL == card_in(dev, i).name) + return -EINVAL; + mutex_lock(&dev->lock); + video_mux(dev, i); + mutex_unlock(&dev->lock); + return 0; +} + +static int saa7134_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + struct video_device *vdev = video_devdata(file); + u32 radio_caps, video_caps, vbi_caps; + + unsigned int tuner_type = dev->tuner_type; + + strcpy(cap->driver, "saa7134"); + strlcpy(cap->card, saa7134_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + + cap->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + if ((tuner_type != TUNER_ABSENT) && (tuner_type != UNSET)) + cap->device_caps |= V4L2_CAP_TUNER; + + radio_caps = V4L2_CAP_RADIO; + if (dev->has_rds) + radio_caps |= V4L2_CAP_RDS_CAPTURE; + + video_caps = V4L2_CAP_VIDEO_CAPTURE; + if (saa7134_no_overlay <= 0) + video_caps |= V4L2_CAP_VIDEO_OVERLAY; + + vbi_caps = V4L2_CAP_VBI_CAPTURE; + + switch (vdev->vfl_type) { + case VFL_TYPE_RADIO: + cap->device_caps |= radio_caps; + break; + case VFL_TYPE_GRABBER: + cap->device_caps |= video_caps; + break; + case VFL_TYPE_VBI: + cap->device_caps |= vbi_caps; + break; + } + cap->capabilities = radio_caps | video_caps | vbi_caps | + cap->device_caps | V4L2_CAP_DEVICE_CAPS; + if (vdev->vfl_type == VFL_TYPE_RADIO) { + cap->device_caps &= ~V4L2_CAP_STREAMING; + if (!dev->has_rds) + cap->device_caps &= ~V4L2_CAP_READWRITE; + } + + return 0; +} + +int saa7134_s_std_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, v4l2_std_id id) +{ + unsigned long flags; + unsigned int i; + v4l2_std_id fixup; + + if (!fh && res_locked(dev, RESOURCE_OVERLAY)) { + /* Don't change the std from the mpeg device + if overlay is active. */ + return -EBUSY; + } + + for (i = 0; i < TVNORMS; i++) + if (id == tvnorms[i].id) + break; + + if (i == TVNORMS) + for (i = 0; i < TVNORMS; i++) + if (id & tvnorms[i].id) + break; + if (i == TVNORMS) + return -EINVAL; + + if ((id & V4L2_STD_SECAM) && (secam[0] != '-')) { + if (secam[0] == 'L' || secam[0] == 'l') { + if (secam[1] == 'C' || secam[1] == 'c') + fixup = V4L2_STD_SECAM_LC; + else + fixup = V4L2_STD_SECAM_L; + } else { + if (secam[0] == 'D' || secam[0] == 'd') + fixup = V4L2_STD_SECAM_DK; + else + fixup = V4L2_STD_SECAM; + } + for (i = 0; i < TVNORMS; i++) { + if (fixup == tvnorms[i].id) + break; + } + if (i == TVNORMS) + return -EINVAL; + } + + id = tvnorms[i].id; + + mutex_lock(&dev->lock); + if (fh && res_check(fh, RESOURCE_OVERLAY)) { + spin_lock_irqsave(&dev->slock, flags); + stop_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + + set_tvnorm(dev, &tvnorms[i]); + + spin_lock_irqsave(&dev->slock, flags); + start_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + } else + set_tvnorm(dev, &tvnorms[i]); + + saa7134_tvaudio_do_scan(dev); + mutex_unlock(&dev->lock); + return 0; +} +EXPORT_SYMBOL_GPL(saa7134_s_std_internal); + +static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id id) +{ + struct saa7134_fh *fh = priv; + + return saa7134_s_std_internal(fh->dev, fh, id); +} + +static int saa7134_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + *id = dev->tvnorm->id; + return 0; +} + +static int saa7134_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cap) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + cap->bounds = dev->crop_bounds; + cap->defrect = dev->crop_defrect; + cap->pixelaspect.numerator = 1; + cap->pixelaspect.denominator = 1; + if (dev->tvnorm->id & V4L2_STD_525_60) { + cap->pixelaspect.numerator = 11; + cap->pixelaspect.denominator = 10; + } + if (dev->tvnorm->id & V4L2_STD_625_50) { + cap->pixelaspect.numerator = 54; + cap->pixelaspect.denominator = 59; + } + return 0; +} + +static int saa7134_g_crop(struct file *file, void *f, struct v4l2_crop *crop) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + crop->c = dev->crop_current; + return 0; +} + +static int saa7134_s_crop(struct file *file, void *f, const struct v4l2_crop *crop) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + struct v4l2_rect *b = &dev->crop_bounds; + struct v4l2_rect *c = &dev->crop_current; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + if (crop->c.height < 0) + return -EINVAL; + if (crop->c.width < 0) + return -EINVAL; + + if (res_locked(fh->dev, RESOURCE_OVERLAY)) + return -EBUSY; + if (res_locked(fh->dev, RESOURCE_VIDEO)) + return -EBUSY; + + *c = crop->c; + if (c->top < b->top) + c->top = b->top; + if (c->top > b->top + b->height) + c->top = b->top + b->height; + if (c->height > b->top - c->top + b->height) + c->height = b->top - c->top + b->height; + + if (c->left < b->left) + c->left = b->left; + if (c->left > b->left + b->width) + c->left = b->left + b->width; + if (c->width > b->left - c->left + b->width) + c->width = b->left - c->left + b->width; + return 0; +} + +static int saa7134_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int n; + + if (0 != t->index) + return -EINVAL; + memset(t, 0, sizeof(*t)); + for (n = 0; n < SAA7134_INPUT_MAX; n++) { + if (card_in(dev, n).tv) + break; + } + if (n == SAA7134_INPUT_MAX) + return -EINVAL; + if (NULL != card_in(dev, n).name) { + strcpy(t->name, "Television"); + t->type = V4L2_TUNER_ANALOG_TV; + saa_call_all(dev, tuner, g_tuner, t); + t->capability = V4L2_TUNER_CAP_NORM | + V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2; + t->rxsubchans = saa7134_tvaudio_getstereo(dev); + t->audmode = saa7134_tvaudio_rx2mode(t->rxsubchans); + } + if (0 != (saa_readb(SAA7134_STATUS_VIDEO1) & 0x03)) + t->signal = 0xffff; + return 0; +} + +static int saa7134_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int rx, mode; + + if (0 != t->index) + return -EINVAL; + + mode = dev->thread.mode; + if (UNSET == mode) { + rx = saa7134_tvaudio_getstereo(dev); + mode = saa7134_tvaudio_rx2mode(rx); + } + if (mode != t->audmode) + dev->thread.mode = t->audmode; + + return 0; +} + +static int saa7134_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (0 != f->tuner) + return -EINVAL; + + f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; + saa_call_all(dev, tuner, g_frequency, f); + + return 0; +} + +static int saa7134_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (0 != f->tuner) + return -EINVAL; + if (0 == fh->radio && V4L2_TUNER_ANALOG_TV != f->type) + return -EINVAL; + if (1 == fh->radio && V4L2_TUNER_RADIO != f->type) + return -EINVAL; + mutex_lock(&dev->lock); + + saa_call_all(dev, tuner, s_frequency, f); + + saa7134_tvaudio_do_scan(dev); + mutex_unlock(&dev->lock); + return 0; +} + +static int saa7134_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index >= FORMATS) + return -EINVAL; + + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); + + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +static int saa7134_enum_fmt_vid_overlay(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (saa7134_no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } + + if ((f->index >= FORMATS) || formats[f->index].planar) + return -EINVAL; + + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); + + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +static int saa7134_g_fbuf(struct file *file, void *f, + struct v4l2_framebuffer *fb) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + + *fb = dev->ovbuf; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; + + return 0; +} + +static int saa7134_s_fbuf(struct file *file, void *f, + const struct v4l2_framebuffer *fb) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + struct saa7134_format *fmt; + + if (!capable(CAP_SYS_ADMIN) && + !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* check args */ + fmt = format_by_fourcc(fb->fmt.pixelformat); + if (NULL == fmt) + return -EINVAL; + + /* ok, accept it */ + dev->ovbuf = *fb; + dev->ovfmt = fmt; + if (0 == dev->ovbuf.fmt.bytesperline) + dev->ovbuf.fmt.bytesperline = + dev->ovbuf.fmt.width*fmt->depth/8; + return 0; +} + +static int saa7134_overlay(struct file *file, void *f, unsigned int on) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + unsigned long flags; + + if (on) { + if (saa7134_no_overlay > 0) { + dprintk("no_overlay\n"); + return -EINVAL; + } + + if (!res_get(dev, fh, RESOURCE_OVERLAY)) + return -EBUSY; + spin_lock_irqsave(&dev->slock, flags); + start_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + } + if (!on) { + if (!res_check(fh, RESOURCE_OVERLAY)) + return -EINVAL; + spin_lock_irqsave(&dev->slock, flags); + stop_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + res_free(dev, fh, RESOURCE_OVERLAY); + } + return 0; +} + +static int saa7134_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct saa7134_fh *fh = priv; + return videobuf_reqbufs(saa7134_queue(fh), p); +} + +static int saa7134_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_querybuf(saa7134_queue(fh), b); +} + +static int saa7134_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_qbuf(saa7134_queue(fh), b); +} + +static int saa7134_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_dqbuf(saa7134_queue(fh), b, + file->f_flags & O_NONBLOCK); +} + +static int saa7134_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int res = saa7134_resource(fh); + + if (!res_get(dev, fh, res)) + return -EBUSY; + + /* The SAA7134 has a 1K FIFO; the datasheet suggests that when + * configured conservatively, there's 22 usec of buffering for video. + * We therefore request a DMA latency of 20 usec, giving us 2 usec of + * margin in case the FIFO is configured differently to the datasheet. + * Unfortunately, I lack register-level documentation to check the + * Linux FIFO setup and confirm the perfect value. + */ + pm_qos_add_request(&fh->qos_request, + PM_QOS_CPU_DMA_LATENCY, + 20); + + return videobuf_streamon(saa7134_queue(fh)); +} + +static int saa7134_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + int err; + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int res = saa7134_resource(fh); + + pm_qos_remove_request(&fh->qos_request); + + err = videobuf_streamoff(saa7134_queue(fh)); + if (err < 0) + return err; + res_free(dev, fh, res); + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register (struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; + reg->val = saa_readb(reg->reg); + reg->size = 1; + return 0; +} + +static int vidioc_s_register (struct file *file, void *priv, + const struct v4l2_dbg_register *reg) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; + saa_writeb(reg->reg&0xffffff, reg->val); + return 0; +} +#endif + +static int radio_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct saa7134_fh *fh = file->private_data; + struct saa7134_dev *dev = fh->dev; + + if (0 != t->index) + return -EINVAL; + + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; + + saa_call_all(dev, tuner, g_tuner, t); + t->audmode &= V4L2_TUNER_MODE_MONO | V4L2_TUNER_MODE_STEREO; + if (dev->input->amux == TV) { + t->signal = 0xf800 - ((saa_readb(0x581) & 0x1f) << 11); + t->rxsubchans = (saa_readb(0x529) & 0x08) ? + V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; + } + return 0; +} +static int radio_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct saa7134_fh *fh = file->private_data; + struct saa7134_dev *dev = fh->dev; + + if (0 != t->index) + return -EINVAL; + + saa_call_all(dev, tuner, s_tuner, t); + return 0; +} + +static int radio_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; + + strcpy(i->name, "Radio"); + i->type = V4L2_INPUT_TYPE_TUNER; + + return 0; +} + +static int radio_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int radio_s_input(struct file *filp, void *priv, unsigned int i) +{ + return 0; +} + +static int radio_s_std(struct file *file, void *fh, v4l2_std_id norm) +{ + return 0; +} + +static int radio_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + const struct v4l2_queryctrl *ctrl; + + if (c->id < V4L2_CID_BASE || + c->id >= V4L2_CID_LASTP1) + return -EINVAL; + if (c->id == V4L2_CID_AUDIO_MUTE) { + ctrl = ctrl_by_id(c->id); + *c = *ctrl; + } else + *c = no_ctrl; + return 0; +} + +static const struct v4l2_file_operations video_fops = +{ + .owner = THIS_MODULE, + .open = video_open, + .release = video_release, + .read = video_read, + .poll = video_poll, + .mmap = video_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops video_ioctl_ops = { + .vidioc_querycap = saa7134_querycap, + .vidioc_enum_fmt_vid_cap = saa7134_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = saa7134_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = saa7134_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = saa7134_s_fmt_vid_cap, + .vidioc_enum_fmt_vid_overlay = saa7134_enum_fmt_vid_overlay, + .vidioc_g_fmt_vid_overlay = saa7134_g_fmt_vid_overlay, + .vidioc_try_fmt_vid_overlay = saa7134_try_fmt_vid_overlay, + .vidioc_s_fmt_vid_overlay = saa7134_s_fmt_vid_overlay, + .vidioc_g_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, + .vidioc_try_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, + .vidioc_s_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, + .vidioc_cropcap = saa7134_cropcap, + .vidioc_reqbufs = saa7134_reqbufs, + .vidioc_querybuf = saa7134_querybuf, + .vidioc_qbuf = saa7134_qbuf, + .vidioc_dqbuf = saa7134_dqbuf, + .vidioc_s_std = saa7134_s_std, + .vidioc_g_std = saa7134_g_std, + .vidioc_enum_input = saa7134_enum_input, + .vidioc_g_input = saa7134_g_input, + .vidioc_s_input = saa7134_s_input, + .vidioc_queryctrl = saa7134_queryctrl, + .vidioc_g_ctrl = saa7134_g_ctrl, + .vidioc_s_ctrl = saa7134_s_ctrl, + .vidioc_streamon = saa7134_streamon, + .vidioc_streamoff = saa7134_streamoff, + .vidioc_g_tuner = saa7134_g_tuner, + .vidioc_s_tuner = saa7134_s_tuner, + .vidioc_g_crop = saa7134_g_crop, + .vidioc_s_crop = saa7134_s_crop, + .vidioc_g_fbuf = saa7134_g_fbuf, + .vidioc_s_fbuf = saa7134_s_fbuf, + .vidioc_overlay = saa7134_overlay, + .vidioc_g_frequency = saa7134_g_frequency, + .vidioc_s_frequency = saa7134_s_frequency, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif +}; + +static const struct v4l2_file_operations radio_fops = { + .owner = THIS_MODULE, + .open = video_open, + .read = radio_read, + .release = video_release, + .ioctl = video_ioctl2, + .poll = radio_poll, +}; + +static const struct v4l2_ioctl_ops radio_ioctl_ops = { + .vidioc_querycap = saa7134_querycap, + .vidioc_g_tuner = radio_g_tuner, + .vidioc_enum_input = radio_enum_input, + .vidioc_s_tuner = radio_s_tuner, + .vidioc_s_input = radio_s_input, + .vidioc_s_std = radio_s_std, + .vidioc_queryctrl = radio_queryctrl, + .vidioc_g_input = radio_g_input, + .vidioc_g_ctrl = saa7134_g_ctrl, + .vidioc_s_ctrl = saa7134_s_ctrl, + .vidioc_g_frequency = saa7134_g_frequency, + .vidioc_s_frequency = saa7134_s_frequency, +}; + +/* ----------------------------------------------------------- */ +/* exported stuff */ + +struct video_device saa7134_video_template = { + .name = "saa7134-video", + .fops = &video_fops, + .ioctl_ops = &video_ioctl_ops, + .tvnorms = SAA7134_NORMS, + .current_norm = V4L2_STD_PAL, +}; + +struct video_device saa7134_radio_template = { + .name = "saa7134-radio", + .fops = &radio_fops, + .ioctl_ops = &radio_ioctl_ops, +}; + +int saa7134_video_init1(struct saa7134_dev *dev) +{ + /* sanitycheck insmod options */ + if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME) + gbuffers = 2; + if (gbufsize > gbufsize_max) + gbufsize = gbufsize_max; + gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK; + + /* put some sensible defaults into the data structures ... */ + dev->ctl_bright = ctrl_by_id(V4L2_CID_BRIGHTNESS)->default_value; + dev->ctl_contrast = ctrl_by_id(V4L2_CID_CONTRAST)->default_value; + dev->ctl_hue = ctrl_by_id(V4L2_CID_HUE)->default_value; + dev->ctl_saturation = ctrl_by_id(V4L2_CID_SATURATION)->default_value; + dev->ctl_volume = ctrl_by_id(V4L2_CID_AUDIO_VOLUME)->default_value; + dev->ctl_mute = 1; // ctrl_by_id(V4L2_CID_AUDIO_MUTE)->default_value; + dev->ctl_invert = ctrl_by_id(V4L2_CID_PRIVATE_INVERT)->default_value; + dev->ctl_automute = ctrl_by_id(V4L2_CID_PRIVATE_AUTOMUTE)->default_value; + + if (dev->tda9887_conf && dev->ctl_automute) + dev->tda9887_conf |= TDA9887_AUTOMUTE; + dev->automute = 0; + + INIT_LIST_HEAD(&dev->video_q.queue); + init_timer(&dev->video_q.timeout); + dev->video_q.timeout.function = saa7134_buffer_timeout; + dev->video_q.timeout.data = (unsigned long)(&dev->video_q); + dev->video_q.dev = dev; + + if (saa7134_boards[dev->board].video_out) + saa7134_videoport_init(dev); + + return 0; +} + +int saa7134_videoport_init(struct saa7134_dev *dev) +{ + /* enable video output */ + int vo = saa7134_boards[dev->board].video_out; + int video_reg; + unsigned int vid_port_opts = saa7134_boards[dev->board].vid_port_opts; + + /* Configure videoport */ + saa_writeb(SAA7134_VIDEO_PORT_CTRL0, video_out[vo][0]); + video_reg = video_out[vo][1]; + if (vid_port_opts & SET_T_CODE_POLARITY_NON_INVERTED) + video_reg &= ~VP_T_CODE_P_INVERTED; + saa_writeb(SAA7134_VIDEO_PORT_CTRL1, video_reg); + saa_writeb(SAA7134_VIDEO_PORT_CTRL2, video_out[vo][2]); + saa_writeb(SAA7134_VIDEO_PORT_CTRL4, video_out[vo][4]); + video_reg = video_out[vo][5]; + if (vid_port_opts & SET_CLOCK_NOT_DELAYED) + video_reg &= ~VP_CLK_CTRL2_DELAYED; + if (vid_port_opts & SET_CLOCK_INVERTED) + video_reg |= VP_CLK_CTRL1_INVERTED; + saa_writeb(SAA7134_VIDEO_PORT_CTRL5, video_reg); + video_reg = video_out[vo][6]; + if (vid_port_opts & SET_VSYNC_OFF) { + video_reg &= ~VP_VS_TYPE_MASK; + video_reg |= VP_VS_TYPE_OFF; + } + saa_writeb(SAA7134_VIDEO_PORT_CTRL6, video_reg); + saa_writeb(SAA7134_VIDEO_PORT_CTRL7, video_out[vo][7]); + saa_writeb(SAA7134_VIDEO_PORT_CTRL8, video_out[vo][8]); + + /* Start videoport */ + saa_writeb(SAA7134_VIDEO_PORT_CTRL3, video_out[vo][3]); + + return 0; +} + +int saa7134_video_init2(struct saa7134_dev *dev) +{ + /* init video hw */ + set_tvnorm(dev,&tvnorms[0]); + video_mux(dev,0); + saa7134_tvaudio_setmute(dev); + saa7134_tvaudio_setvolume(dev,dev->ctl_volume); + return 0; +} + +void saa7134_irq_video_signalchange(struct saa7134_dev *dev) +{ + static const char *st[] = { + "(no signal)", "NTSC", "PAL", "SECAM" }; + u32 st1,st2; + + st1 = saa_readb(SAA7134_STATUS_VIDEO1); + st2 = saa_readb(SAA7134_STATUS_VIDEO2); + dprintk("DCSDT: pll: %s, sync: %s, norm: %s\n", + (st1 & 0x40) ? "not locked" : "locked", + (st2 & 0x40) ? "no" : "yes", + st[st1 & 0x03]); + dev->nosignal = (st1 & 0x40) || (st2 & 0x40) || !(st2 & 0x1); + + if (dev->nosignal) { + /* no video signal -> mute audio */ + if (dev->ctl_automute) + dev->automute = 1; + saa7134_tvaudio_setmute(dev); + } else { + /* wake up tvaudio audio carrier scan thread */ + saa7134_tvaudio_do_scan(dev); + } + + if ((st2 & 0x80) && !noninterlaced && !dev->nosignal) + saa_clearb(SAA7134_SYNC_CTRL, 0x20); + else + saa_setb(SAA7134_SYNC_CTRL, 0x20); + + if (dev->mops && dev->mops->signal_change) + dev->mops->signal_change(dev); +} + + +void saa7134_irq_video_done(struct saa7134_dev *dev, unsigned long status) +{ + enum v4l2_field field; + + spin_lock(&dev->slock); + if (dev->video_q.curr) { + dev->video_fieldcount++; + field = dev->video_q.curr->vb.field; + if (V4L2_FIELD_HAS_BOTH(field)) { + /* make sure we have seen both fields */ + if ((status & 0x10) == 0x00) { + dev->video_q.curr->top_seen = 1; + goto done; + } + if (!dev->video_q.curr->top_seen) + goto done; + } else if (field == V4L2_FIELD_TOP) { + if ((status & 0x10) != 0x10) + goto done; + } else if (field == V4L2_FIELD_BOTTOM) { + if ((status & 0x10) != 0x00) + goto done; + } + dev->video_q.curr->vb.field_count = dev->video_fieldcount; + saa7134_buffer_finish(dev,&dev->video_q,VIDEOBUF_DONE); + } + saa7134_buffer_next(dev,&dev->video_q); + + done: + spin_unlock(&dev->slock); +} + +/* ----------------------------------------------------------- */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/saa7134/saa7134.h b/drivers/media/pci/saa7134/saa7134.h new file mode 100644 index 00000000..d2ad16c1 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134.h @@ -0,0 +1,859 @@ +/* + * + * v4l2 device driver for philips saa7134 based TV cards + * + * (c) 2001,02 Gerd Knorr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define SAA7134_VERSION "0, 2, 17" + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if IS_ENABLED(CONFIG_VIDEO_SAA7134_DVB) +#include +#endif +#include "tda8290.h" + +#define UNSET (-1U) + +/* ----------------------------------------------------------- */ +/* enums */ + +enum saa7134_tvaudio_mode { + TVAUDIO_FM_MONO = 1, + TVAUDIO_FM_BG_STEREO = 2, + TVAUDIO_FM_SAT_STEREO = 3, + TVAUDIO_FM_K_STEREO = 4, + TVAUDIO_NICAM_AM = 5, + TVAUDIO_NICAM_FM = 6, +}; + +enum saa7134_audio_in { + TV = 1, + LINE1 = 2, + LINE2 = 3, + LINE2_LEFT, +}; + +enum saa7134_video_out { + CCIR656 = 1, +}; + +/* ----------------------------------------------------------- */ +/* static data */ + +struct saa7134_tvnorm { + char *name; + v4l2_std_id id; + + /* video decoder */ + unsigned int sync_control; + unsigned int luma_control; + unsigned int chroma_ctrl1; + unsigned int chroma_gain; + unsigned int chroma_ctrl2; + unsigned int vgate_misc; + + /* video scaler */ + unsigned int h_start; + unsigned int h_stop; + unsigned int video_v_start; + unsigned int video_v_stop; + unsigned int vbi_v_start_0; + unsigned int vbi_v_stop_0; + unsigned int src_timing; + unsigned int vbi_v_start_1; +}; + +struct saa7134_tvaudio { + char *name; + v4l2_std_id std; + enum saa7134_tvaudio_mode mode; + int carr1; + int carr2; +}; + +struct saa7134_format { + char *name; + unsigned int fourcc; + unsigned int depth; + unsigned int pm; + unsigned int vshift; /* vertical downsampling (for planar yuv) */ + unsigned int hshift; /* horizontal downsampling (for planar yuv) */ + unsigned int bswap:1; + unsigned int wswap:1; + unsigned int yuv:1; + unsigned int planar:1; + unsigned int uvswap:1; +}; + +struct saa7134_card_ir { + struct rc_dev *dev; + + char name[32]; + char phys[32]; + unsigned users; + + u32 polling; + u32 last_gpio; + u32 mask_keycode, mask_keydown, mask_keyup; + + bool running; + + struct timer_list timer; + + /* IR core raw decoding */ + u32 raw_decode; +}; + +/* ----------------------------------------------------------- */ +/* card configuration */ + +#define SAA7134_BOARD_NOAUTO UNSET +#define SAA7134_BOARD_UNKNOWN 0 +#define SAA7134_BOARD_PROTEUS_PRO 1 +#define SAA7134_BOARD_FLYVIDEO3000 2 +#define SAA7134_BOARD_FLYVIDEO2000 3 +#define SAA7134_BOARD_EMPRESS 4 +#define SAA7134_BOARD_MONSTERTV 5 +#define SAA7134_BOARD_MD9717 6 +#define SAA7134_BOARD_TVSTATION_RDS 7 +#define SAA7134_BOARD_CINERGY400 8 +#define SAA7134_BOARD_MD5044 9 +#define SAA7134_BOARD_KWORLD 10 +#define SAA7134_BOARD_CINERGY600 11 +#define SAA7134_BOARD_MD7134 12 +#define SAA7134_BOARD_TYPHOON_90031 13 +#define SAA7134_BOARD_ELSA 14 +#define SAA7134_BOARD_ELSA_500TV 15 +#define SAA7134_BOARD_ASUSTeK_TVFM7134 16 +#define SAA7134_BOARD_VA1000POWER 17 +#define SAA7134_BOARD_BMK_MPEX_NOTUNER 18 +#define SAA7134_BOARD_VIDEOMATE_TV 19 +#define SAA7134_BOARD_CRONOS_PLUS 20 +#define SAA7134_BOARD_10MOONSTVMASTER 21 +#define SAA7134_BOARD_MD2819 22 +#define SAA7134_BOARD_BMK_MPEX_TUNER 23 +#define SAA7134_BOARD_TVSTATION_DVR 24 +#define SAA7134_BOARD_ASUSTEK_TVFM7133 25 +#define SAA7134_BOARD_PINNACLE_PCTV_STEREO 26 +#define SAA7134_BOARD_MANLI_MTV002 27 +#define SAA7134_BOARD_MANLI_MTV001 28 +#define SAA7134_BOARD_TG3000TV 29 +#define SAA7134_BOARD_ECS_TVP3XP 30 +#define SAA7134_BOARD_ECS_TVP3XP_4CB5 31 +#define SAA7134_BOARD_AVACSSMARTTV 32 +#define SAA7134_BOARD_AVERMEDIA_DVD_EZMAKER 33 +#define SAA7134_BOARD_NOVAC_PRIMETV7133 34 +#define SAA7134_BOARD_AVERMEDIA_STUDIO_305 35 +#define SAA7134_BOARD_UPMOST_PURPLE_TV 36 +#define SAA7134_BOARD_ITEMS_MTV005 37 +#define SAA7134_BOARD_CINERGY200 38 +#define SAA7134_BOARD_FLYTVPLATINUM_MINI 39 +#define SAA7134_BOARD_VIDEOMATE_TV_PVR 40 +#define SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUS 41 +#define SAA7134_BOARD_SABRENT_SBTTVFM 42 +#define SAA7134_BOARD_ZOLID_XPERT_TV7134 43 +#define SAA7134_BOARD_EMPIRE_PCI_TV_RADIO_LE 44 +#define SAA7134_BOARD_AVERMEDIA_STUDIO_307 45 +#define SAA7134_BOARD_AVERMEDIA_CARDBUS 46 +#define SAA7134_BOARD_CINERGY400_CARDBUS 47 +#define SAA7134_BOARD_CINERGY600_MK3 48 +#define SAA7134_BOARD_VIDEOMATE_GOLD_PLUS 49 +#define SAA7134_BOARD_PINNACLE_300I_DVBT_PAL 50 +#define SAA7134_BOARD_PROVIDEO_PV952 51 +#define SAA7134_BOARD_AVERMEDIA_305 52 +#define SAA7134_BOARD_ASUSTeK_TVFM7135 53 +#define SAA7134_BOARD_FLYTVPLATINUM_FM 54 +#define SAA7134_BOARD_FLYDVBTDUO 55 +#define SAA7134_BOARD_AVERMEDIA_307 56 +#define SAA7134_BOARD_AVERMEDIA_GO_007_FM 57 +#define SAA7134_BOARD_ADS_INSTANT_TV 58 +#define SAA7134_BOARD_KWORLD_VSTREAM_XPERT 59 +#define SAA7134_BOARD_FLYDVBT_DUO_CARDBUS 60 +#define SAA7134_BOARD_PHILIPS_TOUGH 61 +#define SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII 62 +#define SAA7134_BOARD_KWORLD_XPERT 63 +#define SAA7134_BOARD_FLYTV_DIGIMATRIX 64 +#define SAA7134_BOARD_KWORLD_TERMINATOR 65 +#define SAA7134_BOARD_YUAN_TUN900 66 +#define SAA7134_BOARD_BEHOLD_409FM 67 +#define SAA7134_BOARD_GOTVIEW_7135 68 +#define SAA7134_BOARD_PHILIPS_EUROPA 69 +#define SAA7134_BOARD_VIDEOMATE_DVBT_300 70 +#define SAA7134_BOARD_VIDEOMATE_DVBT_200 71 +#define SAA7134_BOARD_RTD_VFG7350 72 +#define SAA7134_BOARD_RTD_VFG7330 73 +#define SAA7134_BOARD_FLYTVPLATINUM_MINI2 74 +#define SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180 75 +#define SAA7134_BOARD_MONSTERTV_MOBILE 76 +#define SAA7134_BOARD_PINNACLE_PCTV_110i 77 +#define SAA7134_BOARD_ASUSTeK_P7131_DUAL 78 +#define SAA7134_BOARD_SEDNA_PC_TV_CARDBUS 79 +#define SAA7134_BOARD_ASUSTEK_DIGIMATRIX_TV 80 +#define SAA7134_BOARD_PHILIPS_TIGER 81 +#define SAA7134_BOARD_MSI_TVATANYWHERE_PLUS 82 +#define SAA7134_BOARD_CINERGY250PCI 83 +#define SAA7134_BOARD_FLYDVB_TRIO 84 +#define SAA7134_BOARD_AVERMEDIA_777 85 +#define SAA7134_BOARD_FLYDVBT_LR301 86 +#define SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331 87 +#define SAA7134_BOARD_TEVION_DVBT_220RF 88 +#define SAA7134_BOARD_ELSA_700TV 89 +#define SAA7134_BOARD_KWORLD_ATSC110 90 +#define SAA7134_BOARD_AVERMEDIA_A169_B 91 +#define SAA7134_BOARD_AVERMEDIA_A169_B1 92 +#define SAA7134_BOARD_MD7134_BRIDGE_2 93 +#define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94 +#define SAA7134_BOARD_FLYVIDEO3000_NTSC 95 +#define SAA7134_BOARD_MEDION_MD8800_QUADRO 96 +#define SAA7134_BOARD_FLYDVBS_LR300 97 +#define SAA7134_BOARD_PROTEUS_2309 98 +#define SAA7134_BOARD_AVERMEDIA_A16AR 99 +#define SAA7134_BOARD_ASUS_EUROPA2_HYBRID 100 +#define SAA7134_BOARD_PINNACLE_PCTV_310i 101 +#define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102 +#define SAA7134_BOARD_VIDEOMATE_DVBT_200A 103 +#define SAA7134_BOARD_HAUPPAUGE_HVR1110 104 +#define SAA7134_BOARD_CINERGY_HT_PCMCIA 105 +#define SAA7134_BOARD_ENCORE_ENLTV 106 +#define SAA7134_BOARD_ENCORE_ENLTV_FM 107 +#define SAA7134_BOARD_CINERGY_HT_PCI 108 +#define SAA7134_BOARD_PHILIPS_TIGER_S 109 +#define SAA7134_BOARD_AVERMEDIA_M102 110 +#define SAA7134_BOARD_ASUS_P7131_4871 111 +#define SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA 112 +#define SAA7134_BOARD_ECS_TVP3XP_4CB6 113 +#define SAA7134_BOARD_KWORLD_DVBT_210 114 +#define SAA7134_BOARD_SABRENT_TV_PCB05 115 +#define SAA7134_BOARD_10MOONSTVMASTER3 116 +#define SAA7134_BOARD_AVERMEDIA_SUPER_007 117 +#define SAA7134_BOARD_BEHOLD_401 118 +#define SAA7134_BOARD_BEHOLD_403 119 +#define SAA7134_BOARD_BEHOLD_403FM 120 +#define SAA7134_BOARD_BEHOLD_405 121 +#define SAA7134_BOARD_BEHOLD_405FM 122 +#define SAA7134_BOARD_BEHOLD_407 123 +#define SAA7134_BOARD_BEHOLD_407FM 124 +#define SAA7134_BOARD_BEHOLD_409 125 +#define SAA7134_BOARD_BEHOLD_505FM 126 +#define SAA7134_BOARD_BEHOLD_507_9FM 127 +#define SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM 128 +#define SAA7134_BOARD_BEHOLD_607FM_MK3 129 +#define SAA7134_BOARD_BEHOLD_M6 130 +#define SAA7134_BOARD_TWINHAN_DTV_DVB_3056 131 +#define SAA7134_BOARD_GENIUS_TVGO_A11MCE 132 +#define SAA7134_BOARD_PHILIPS_SNAKE 133 +#define SAA7134_BOARD_CREATIX_CTX953 134 +#define SAA7134_BOARD_MSI_TVANYWHERE_AD11 135 +#define SAA7134_BOARD_AVERMEDIA_CARDBUS_506 136 +#define SAA7134_BOARD_AVERMEDIA_A16D 137 +#define SAA7134_BOARD_AVERMEDIA_M115 138 +#define SAA7134_BOARD_VIDEOMATE_T750 139 +#define SAA7134_BOARD_AVERMEDIA_A700_PRO 140 +#define SAA7134_BOARD_AVERMEDIA_A700_HYBRID 141 +#define SAA7134_BOARD_BEHOLD_H6 142 +#define SAA7134_BOARD_BEHOLD_M63 143 +#define SAA7134_BOARD_BEHOLD_M6_EXTRA 144 +#define SAA7134_BOARD_AVERMEDIA_M103 145 +#define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146 +#define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 +#define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 +#define SAA7134_BOARD_AVERMEDIA_M135A 149 +#define SAA7134_BOARD_REAL_ANGEL_220 150 +#define SAA7134_BOARD_ADS_INSTANT_HDTV_PCI 151 +#define SAA7134_BOARD_ASUSTeK_TIGER 152 +#define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153 +#define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154 +#define SAA7134_BOARD_HAUPPAUGE_HVR1150 155 +#define SAA7134_BOARD_HAUPPAUGE_HVR1120 156 +#define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157 +#define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158 +#define SAA7134_BOARD_BEHOLD_505RDS_MK5 159 +#define SAA7134_BOARD_BEHOLD_507RDS_MK3 160 +#define SAA7134_BOARD_BEHOLD_507RDS_MK5 161 +#define SAA7134_BOARD_BEHOLD_607FM_MK5 162 +#define SAA7134_BOARD_BEHOLD_609FM_MK3 163 +#define SAA7134_BOARD_BEHOLD_609FM_MK5 164 +#define SAA7134_BOARD_BEHOLD_607RDS_MK3 165 +#define SAA7134_BOARD_BEHOLD_607RDS_MK5 166 +#define SAA7134_BOARD_BEHOLD_609RDS_MK3 167 +#define SAA7134_BOARD_BEHOLD_609RDS_MK5 168 +#define SAA7134_BOARD_VIDEOMATE_S350 169 +#define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170 +#define SAA7134_BOARD_BEHOLD_X7 171 +#define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172 +#define SAA7134_BOARD_ZOLID_HYBRID_PCI 173 +#define SAA7134_BOARD_ASUS_EUROPA_HYBRID 174 +#define SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S 175 +#define SAA7134_BOARD_BEHOLD_505RDS_MK3 176 +#define SAA7134_BOARD_HAWELL_HW_404M7 177 +#define SAA7134_BOARD_BEHOLD_H7 178 +#define SAA7134_BOARD_BEHOLD_A7 179 +#define SAA7134_BOARD_AVERMEDIA_M733A 180 +#define SAA7134_BOARD_TECHNOTREND_BUDGET_T3000 181 +#define SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG 182 +#define SAA7134_BOARD_VIDEOMATE_M1F 183 +#define SAA7134_BOARD_ENCORE_ENLTV_FM3 184 +#define SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2 185 +#define SAA7134_BOARD_BEHOLD_501 186 +#define SAA7134_BOARD_BEHOLD_503FM 187 +#define SAA7134_BOARD_SENSORAY811_911 188 +#define SAA7134_BOARD_KWORLD_PC150U 189 +#define SAA7134_BOARD_ASUSTeK_PS3_100 190 +#define SAA7134_BOARD_HAWELL_HW_9004V1 191 +#define SAA7134_BOARD_AVERMEDIA_A706 192 + +#define SAA7134_MAXBOARDS 32 +#define SAA7134_INPUT_MAX 8 + +/* ----------------------------------------------------------- */ +/* Since we support 2 remote types, lets tell them apart */ + +#define SAA7134_REMOTE_GPIO 1 +#define SAA7134_REMOTE_I2C 2 + +/* ----------------------------------------------------------- */ +/* Video Output Port Register Initialization Options */ + +#define SET_T_CODE_POLARITY_NON_INVERTED (1 << 0) +#define SET_CLOCK_NOT_DELAYED (1 << 1) +#define SET_CLOCK_INVERTED (1 << 2) +#define SET_VSYNC_OFF (1 << 3) + +struct saa7134_input { + char *name; + unsigned int vmux; + enum saa7134_audio_in amux; + unsigned int gpio; + unsigned int tv:1; +}; + +enum saa7134_mpeg_type { + SAA7134_MPEG_UNUSED, + SAA7134_MPEG_EMPRESS, + SAA7134_MPEG_DVB, +}; + +enum saa7134_mpeg_ts_type { + SAA7134_MPEG_TS_PARALLEL = 0, + SAA7134_MPEG_TS_SERIAL, +}; + +struct saa7134_board { + char *name; + unsigned int audio_clock; + + /* input switching */ + unsigned int gpiomask; + struct saa7134_input inputs[SAA7134_INPUT_MAX]; + struct saa7134_input radio; + struct saa7134_input mute; + + /* i2c chip info */ + unsigned int tuner_type; + unsigned int radio_type; + unsigned char tuner_addr; + unsigned char radio_addr; + unsigned char empress_addr; + unsigned char rds_addr; + + unsigned int tda9887_conf; + struct tda829x_config tda829x_conf; + + /* peripheral I/O */ + enum saa7134_video_out video_out; + enum saa7134_mpeg_type mpeg; + enum saa7134_mpeg_ts_type ts_type; + unsigned int vid_port_opts; + unsigned int ts_force_val:1; +}; + +#define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name) +#define card_is_empress(dev) (SAA7134_MPEG_EMPRESS == saa7134_boards[dev->board].mpeg) +#define card_is_dvb(dev) (SAA7134_MPEG_DVB == saa7134_boards[dev->board].mpeg) +#define card_has_mpeg(dev) (SAA7134_MPEG_UNUSED != saa7134_boards[dev->board].mpeg) +#define card(dev) (saa7134_boards[dev->board]) +#define card_in(dev,n) (saa7134_boards[dev->board].inputs[n]) + +/* ----------------------------------------------------------- */ +/* device / file handle status */ + +#define RESOURCE_OVERLAY 1 +#define RESOURCE_VIDEO 2 +#define RESOURCE_VBI 4 + +#define INTERLACE_AUTO 0 +#define INTERLACE_ON 1 +#define INTERLACE_OFF 2 + +#define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ +#define TS_BUFFER_TIMEOUT msecs_to_jiffies(1000) /* 1 second */ + +struct saa7134_dev; +struct saa7134_dma; + +/* saa7134 page table */ +struct saa7134_pgtable { + unsigned int size; + __le32 *cpu; + dma_addr_t dma; +}; + +/* tvaudio thread status */ +struct saa7134_thread { + struct task_struct *thread; + unsigned int scan1; + unsigned int scan2; + unsigned int mode; + unsigned int stopped; +}; + +/* buffer for one video/vbi/ts frame */ +struct saa7134_buf { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + /* saa7134 specific */ + struct saa7134_format *fmt; + unsigned int top_seen; + int (*activate)(struct saa7134_dev *dev, + struct saa7134_buf *buf, + struct saa7134_buf *next); + + /* page tables */ + struct saa7134_pgtable *pt; +}; + +struct saa7134_dmaqueue { + struct saa7134_dev *dev; + struct saa7134_buf *curr; + struct list_head queue; + struct timer_list timeout; + unsigned int need_two; +}; + +/* video filehandle status */ +struct saa7134_fh { + struct v4l2_fh fh; + struct saa7134_dev *dev; + unsigned int radio; + enum v4l2_buf_type type; + unsigned int resources; + struct pm_qos_request qos_request; + + /* video overlay */ + struct v4l2_window win; + struct v4l2_clip clips[8]; + unsigned int nclips; + + /* video capture */ + struct saa7134_format *fmt; + unsigned int width,height; + struct videobuf_queue cap; + struct saa7134_pgtable pt_cap; + + /* vbi capture */ + struct videobuf_queue vbi; + struct saa7134_pgtable pt_vbi; +}; + +/* dmasound dsp status */ +struct saa7134_dmasound { + struct mutex lock; + int minor_mixer; + int minor_dsp; + unsigned int users_dsp; + + /* mixer */ + enum saa7134_audio_in input; + unsigned int count; + unsigned int line1; + unsigned int line2; + + /* dsp */ + unsigned int afmt; + unsigned int rate; + unsigned int channels; + unsigned int recording_on; + unsigned int dma_running; + unsigned int blocks; + unsigned int blksize; + unsigned int bufsize; + struct saa7134_pgtable pt; + struct videobuf_dmabuf dma; + unsigned int dma_blk; + unsigned int read_offset; + unsigned int read_count; + void * priv_data; + struct snd_pcm_substream *substream; +}; + +/* ts/mpeg status */ +struct saa7134_ts { + /* TS capture */ + struct saa7134_pgtable pt_ts; + int nr_packets; + int nr_bufs; +}; + +/* ts/mpeg ops */ +struct saa7134_mpeg_ops { + enum saa7134_mpeg_type type; + struct list_head next; + int (*init)(struct saa7134_dev *dev); + int (*fini)(struct saa7134_dev *dev); + void (*signal_change)(struct saa7134_dev *dev); +}; + +/* global device status */ +struct saa7134_dev { + struct list_head devlist; + struct mutex lock; + spinlock_t slock; + struct v4l2_device v4l2_dev; + /* workstruct for loading modules */ + struct work_struct request_module_wk; + + /* insmod option/autodetected */ + int autodetected; + + /* various device info */ + unsigned int resources; + struct video_device *video_dev; + struct video_device *radio_dev; + struct video_device *vbi_dev; + struct saa7134_dmasound dmasound; + + /* infrared remote */ + int has_remote; + struct saa7134_card_ir *remote; + + /* pci i/o */ + char name[32]; + int nr; + struct pci_dev *pci; + unsigned char pci_rev,pci_lat; + __u32 __iomem *lmmio; + __u8 __iomem *bmmio; + + /* config info */ + unsigned int board; + unsigned int tuner_type; + unsigned int radio_type; + unsigned char tuner_addr; + unsigned char radio_addr; + + unsigned int tda9887_conf; + unsigned int gpio_value; + + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + unsigned char eedata[256]; + int has_rds; + + /* video overlay */ + struct v4l2_framebuffer ovbuf; + struct saa7134_format *ovfmt; + unsigned int ovenable; + enum v4l2_field ovfield; + + /* video+ts+vbi capture */ + struct saa7134_dmaqueue video_q; + struct saa7134_dmaqueue vbi_q; + unsigned int video_fieldcount; + unsigned int vbi_fieldcount; + + /* various v4l controls */ + struct saa7134_tvnorm *tvnorm; /* video */ + struct saa7134_tvaudio *tvaudio; + unsigned int ctl_input; + int ctl_bright; + int ctl_contrast; + int ctl_hue; + int ctl_saturation; + int ctl_mute; /* audio */ + int ctl_volume; + int ctl_invert; /* private */ + int ctl_mirror; + int ctl_y_odd; + int ctl_y_even; + int ctl_automute; + + /* crop */ + struct v4l2_rect crop_bounds; + struct v4l2_rect crop_defrect; + struct v4l2_rect crop_current; + + /* other global state info */ + unsigned int automute; + struct saa7134_thread thread; + struct saa7134_input *input; + struct saa7134_input *hw_input; + unsigned int hw_mute; + int last_carrier; + int nosignal; + unsigned int insuspend; + + /* I2C keyboard data */ + struct IR_i2c_init_data init_data; + + /* SAA7134_MPEG_* */ + struct saa7134_ts ts; + struct saa7134_dmaqueue ts_q; + int ts_started; + struct saa7134_mpeg_ops *mops; + + /* SAA7134_MPEG_EMPRESS only */ + struct video_device *empress_dev; + struct videobuf_queue empress_tsq; + atomic_t empress_users; + struct work_struct empress_workqueue; + int empress_started; + +#if IS_ENABLED(CONFIG_VIDEO_SAA7134_DVB) + /* SAA7134_MPEG_DVB only */ + struct videobuf_dvb_frontends frontends; + int (*original_demod_sleep)(struct dvb_frontend *fe); + int (*original_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); + int (*original_set_high_voltage)(struct dvb_frontend *fe, long arg); +#endif + void (*gate_ctrl)(struct saa7134_dev *dev, int open); +}; + +/* ----------------------------------------------------------- */ + +#define saa_readl(reg) readl(dev->lmmio + (reg)) +#define saa_writel(reg,value) writel((value), dev->lmmio + (reg)); +#define saa_andorl(reg,mask,value) \ + writel((readl(dev->lmmio+(reg)) & ~(mask)) |\ + ((value) & (mask)), dev->lmmio+(reg)) +#define saa_setl(reg,bit) saa_andorl((reg),(bit),(bit)) +#define saa_clearl(reg,bit) saa_andorl((reg),(bit),0) + +#define saa_readb(reg) readb(dev->bmmio + (reg)) +#define saa_writeb(reg,value) writeb((value), dev->bmmio + (reg)); +#define saa_andorb(reg,mask,value) \ + writeb((readb(dev->bmmio+(reg)) & ~(mask)) |\ + ((value) & (mask)), dev->bmmio+(reg)) +#define saa_setb(reg,bit) saa_andorb((reg),(bit),(bit)) +#define saa_clearb(reg,bit) saa_andorb((reg),(bit),0) + +#define saa_wait(us) { udelay(us); } + +#define SAA7134_NORMS (\ + V4L2_STD_PAL | V4L2_STD_PAL_N | \ + V4L2_STD_PAL_Nc | V4L2_STD_SECAM | \ + V4L2_STD_NTSC | V4L2_STD_PAL_M | \ + V4L2_STD_PAL_60) + +#define GRP_EMPRESS (1) +#define saa_call_all(dev, o, f, args...) do { \ + if (dev->gate_ctrl) \ + dev->gate_ctrl(dev, 1); \ + v4l2_device_call_all(&(dev)->v4l2_dev, 0, o, f , ##args); \ + if (dev->gate_ctrl) \ + dev->gate_ctrl(dev, 0); \ +} while (0) + +#define saa_call_empress(dev, o, f, args...) ({ \ + long _rc; \ + if (dev->gate_ctrl) \ + dev->gate_ctrl(dev, 1); \ + _rc = v4l2_device_call_until_err(&(dev)->v4l2_dev, \ + GRP_EMPRESS, o, f , ##args); \ + if (dev->gate_ctrl) \ + dev->gate_ctrl(dev, 0); \ + _rc; \ +}) + +/* ----------------------------------------------------------- */ +/* saa7134-core.c */ + +extern struct list_head saa7134_devlist; +extern struct mutex saa7134_devlist_lock; +extern int saa7134_no_overlay; + +void saa7134_track_gpio(struct saa7134_dev *dev, char *msg); +void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value); + +#define SAA7134_PGTABLE_SIZE 4096 + +int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt); +int saa7134_pgtable_build(struct pci_dev *pci, struct saa7134_pgtable *pt, + struct scatterlist *list, unsigned int length, + unsigned int startpage); +void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt); + +int saa7134_buffer_count(unsigned int size, unsigned int count); +int saa7134_buffer_startpage(struct saa7134_buf *buf); +unsigned long saa7134_buffer_base(struct saa7134_buf *buf); + +int saa7134_buffer_queue(struct saa7134_dev *dev, struct saa7134_dmaqueue *q, + struct saa7134_buf *buf); +void saa7134_buffer_finish(struct saa7134_dev *dev, struct saa7134_dmaqueue *q, + unsigned int state); +void saa7134_buffer_next(struct saa7134_dev *dev, struct saa7134_dmaqueue *q); +void saa7134_buffer_timeout(unsigned long data); +void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf); + +int saa7134_set_dmabits(struct saa7134_dev *dev); + +extern int (*saa7134_dmasound_init)(struct saa7134_dev *dev); +extern int (*saa7134_dmasound_exit)(struct saa7134_dev *dev); + + +/* ----------------------------------------------------------- */ +/* saa7134-cards.c */ + +extern struct saa7134_board saa7134_boards[]; +extern const unsigned int saa7134_bcount; +extern struct pci_device_id saa7134_pci_tbl[]; + +extern int saa7134_board_init1(struct saa7134_dev *dev); +extern int saa7134_board_init2(struct saa7134_dev *dev); +int saa7134_tuner_callback(void *priv, int component, int command, int arg); + + +/* ----------------------------------------------------------- */ +/* saa7134-i2c.c */ + +int saa7134_i2c_register(struct saa7134_dev *dev); +int saa7134_i2c_unregister(struct saa7134_dev *dev); + + +/* ----------------------------------------------------------- */ +/* saa7134-video.c */ + +extern unsigned int video_debug; +extern struct video_device saa7134_video_template; +extern struct video_device saa7134_radio_template; + +int saa7134_s_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c); +int saa7134_g_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c); +int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c); +int saa7134_s_std_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, v4l2_std_id id); + +int saa7134_videoport_init(struct saa7134_dev *dev); +void saa7134_set_tvnorm_hw(struct saa7134_dev *dev); + +int saa7134_video_init1(struct saa7134_dev *dev); +int saa7134_video_init2(struct saa7134_dev *dev); +void saa7134_irq_video_signalchange(struct saa7134_dev *dev); +void saa7134_irq_video_done(struct saa7134_dev *dev, unsigned long status); + + +/* ----------------------------------------------------------- */ +/* saa7134-ts.c */ + +#define TS_PACKET_SIZE 188 /* TS packets 188 bytes */ + +extern struct videobuf_queue_ops saa7134_ts_qops; + +int saa7134_ts_init1(struct saa7134_dev *dev); +int saa7134_ts_fini(struct saa7134_dev *dev); +void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status); + +int saa7134_ts_register(struct saa7134_mpeg_ops *ops); +void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops); + +int saa7134_ts_init_hw(struct saa7134_dev *dev); + +int saa7134_ts_start(struct saa7134_dev *dev); +int saa7134_ts_stop(struct saa7134_dev *dev); + +/* ----------------------------------------------------------- */ +/* saa7134-vbi.c */ + +extern struct videobuf_queue_ops saa7134_vbi_qops; +extern struct video_device saa7134_vbi_template; + +int saa7134_vbi_init1(struct saa7134_dev *dev); +int saa7134_vbi_fini(struct saa7134_dev *dev); +void saa7134_irq_vbi_done(struct saa7134_dev *dev, unsigned long status); + + +/* ----------------------------------------------------------- */ +/* saa7134-tvaudio.c */ + +int saa7134_tvaudio_rx2mode(u32 rx); + +void saa7134_tvaudio_setmute(struct saa7134_dev *dev); +void saa7134_tvaudio_setinput(struct saa7134_dev *dev, + struct saa7134_input *in); +void saa7134_tvaudio_setvolume(struct saa7134_dev *dev, int level); +int saa7134_tvaudio_getstereo(struct saa7134_dev *dev); + +void saa7134_tvaudio_init(struct saa7134_dev *dev); +int saa7134_tvaudio_init2(struct saa7134_dev *dev); +int saa7134_tvaudio_fini(struct saa7134_dev *dev); +int saa7134_tvaudio_do_scan(struct saa7134_dev *dev); +int saa7134_tvaudio_close(struct saa7134_dev *dev); + +int saa_dsp_writel(struct saa7134_dev *dev, int reg, u32 value); + +void saa7134_enable_i2s(struct saa7134_dev *dev); + +/* ----------------------------------------------------------- */ +/* saa7134-oss.c */ + +extern const struct file_operations saa7134_dsp_fops; +extern const struct file_operations saa7134_mixer_fops; + +int saa7134_oss_init1(struct saa7134_dev *dev); +int saa7134_oss_fini(struct saa7134_dev *dev); +void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status); + +/* ----------------------------------------------------------- */ +/* saa7134-input.c */ + +#if defined(CONFIG_VIDEO_SAA7134_RC) +int saa7134_input_init1(struct saa7134_dev *dev); +void saa7134_input_fini(struct saa7134_dev *dev); +void saa7134_input_irq(struct saa7134_dev *dev); +void saa7134_probe_i2c_ir(struct saa7134_dev *dev); +int saa7134_ir_start(struct saa7134_dev *dev); +void saa7134_ir_stop(struct saa7134_dev *dev); +#else +#define saa7134_input_init1(dev) ((void)0) +#define saa7134_input_fini(dev) ((void)0) +#define saa7134_input_irq(dev) ((void)0) +#define saa7134_probe_i2c_ir(dev) ((void)0) +#define saa7134_ir_start(dev) ((void)0) +#define saa7134_ir_stop(dev) ((void)0) +#endif diff --git a/drivers/media/pci/saa7146/Kconfig b/drivers/media/pci/saa7146/Kconfig new file mode 100644 index 00000000..da88b77a --- /dev/null +++ b/drivers/media/pci/saa7146/Kconfig @@ -0,0 +1,38 @@ +config VIDEO_HEXIUM_GEMINI + tristate "Hexium Gemini frame grabber" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + ---help--- + This is a video4linux driver for the Hexium Gemini frame + grabber card by Hexium. Please note that the Gemini Dual + card is *not* fully supported. + + To compile this driver as a module, choose M here: the + module will be called hexium_gemini. + +config VIDEO_HEXIUM_ORION + tristate "Hexium HV-PCI6 and Orion frame grabber" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + ---help--- + This is a video4linux driver for the Hexium HV-PCI6 and + Orion frame grabber cards by Hexium. + + To compile this driver as a module, choose M here: the + module will be called hexium_orion. + +config VIDEO_MXB + tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + select VIDEO_TUNER + select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TDA9840 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TEA6415C if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TEA6420 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This is a video4linux driver for the 'Multimedia eXtension Board' + TV card by Siemens-Nixdorf. + + To compile this driver as a module, choose M here: the + module will be called mxb. diff --git a/drivers/media/pci/saa7146/Makefile b/drivers/media/pci/saa7146/Makefile new file mode 100644 index 00000000..f3566a95 --- /dev/null +++ b/drivers/media/pci/saa7146/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_VIDEO_MXB) += mxb.o +obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o +obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o + +ccflags-y += -I$(srctree)/drivers/media/i2c diff --git a/drivers/media/pci/saa7146/hexium_gemini.c b/drivers/media/pci/saa7146/hexium_gemini.c new file mode 100644 index 00000000..366434f5 --- /dev/null +++ b/drivers/media/pci/saa7146/hexium_gemini.c @@ -0,0 +1,430 @@ +/* + hexium_gemini.c - v4l2 driver for Hexium Gemini frame grabber cards + + Visit http://www.mihu.de/linux/saa7146/ and follow the link + to "hexium" for further details about this card. + + Copyright (C) 2003 Michael Hunold + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DEBUG_VARIABLE debug + +#include +#include + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "debug verbosity"); + +/* global variables */ +static int hexium_num; + +#define HEXIUM_GEMINI 4 +#define HEXIUM_GEMINI_DUAL 5 + +#define HEXIUM_INPUTS 9 +static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = { + { 0, "CVBS 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 1, "CVBS 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 2, "CVBS 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 3, "CVBS 4", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 4, "CVBS 5", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 5, "CVBS 6", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 6, "Y/C 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 7, "Y/C 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 8, "Y/C 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, +}; + +#define HEXIUM_AUDIOS 0 + +struct hexium_data +{ + s8 adr; + u8 byte; +}; + +#define HEXIUM_GEMINI_V_1_0 1 +#define HEXIUM_GEMINI_DUAL_V_1_0 2 + +struct hexium +{ + int type; + + struct video_device *video_dev; + struct i2c_adapter i2c_adapter; + + int cur_input; /* current input */ + v4l2_std_id cur_std; /* current standard */ +}; + +/* Samsung KS0127B decoder default registers */ +static u8 hexium_ks0127b[0x100]={ +/*00*/ 0x00,0x52,0x30,0x40,0x01,0x0C,0x2A,0x10, +/*08*/ 0x00,0x00,0x00,0x60,0x00,0x00,0x0F,0x06, +/*10*/ 0x00,0x00,0xE4,0xC0,0x00,0x00,0x00,0x00, +/*18*/ 0x14,0x9B,0xFE,0xFF,0xFC,0xFF,0x03,0x22, +/*20*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*28*/ 0x00,0x00,0x00,0x00,0x00,0x2C,0x9B,0x00, +/*30*/ 0x00,0x00,0x10,0x80,0x80,0x10,0x80,0x80, +/*38*/ 0x01,0x04,0x00,0x00,0x00,0x29,0xC0,0x00, +/*40*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*48*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*50*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*58*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*60*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*68*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*70*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*78*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*80*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*88*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*90*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*98*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*A0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*A8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*B0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*B8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*C0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*C8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*D0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*D8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*E0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*E8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*F0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/*F8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 +}; + +static struct hexium_data hexium_pal[] = { + { 0x01, 0x52 }, { 0x12, 0x64 }, { 0x2D, 0x2C }, { 0x2E, 0x9B }, { -1 , 0xFF } +}; + +static struct hexium_data hexium_ntsc[] = { + { 0x01, 0x53 }, { 0x12, 0x04 }, { 0x2D, 0x23 }, { 0x2E, 0x81 }, { -1 , 0xFF } +}; + +static struct hexium_data hexium_secam[] = { + { 0x01, 0x52 }, { 0x12, 0x64 }, { 0x2D, 0x2C }, { 0x2E, 0x9B }, { -1 , 0xFF } +}; + +static struct hexium_data hexium_input_select[] = { + { 0x02, 0x60 }, + { 0x02, 0x64 }, + { 0x02, 0x61 }, + { 0x02, 0x65 }, + { 0x02, 0x62 }, + { 0x02, 0x66 }, + { 0x02, 0x68 }, + { 0x02, 0x69 }, + { 0x02, 0x6A }, +}; + +/* fixme: h_offset = 0 for Hexium Gemini *Dual*, which + are currently *not* supported*/ +static struct saa7146_standard hexium_standards[] = { + { + .name = "PAL", .id = V4L2_STD_PAL, + .v_offset = 28, .v_field = 288, + .h_offset = 1, .h_pixels = 680, + .v_max_out = 576, .h_max_out = 768, + }, { + .name = "NTSC", .id = V4L2_STD_NTSC, + .v_offset = 28, .v_field = 240, + .h_offset = 1, .h_pixels = 640, + .v_max_out = 480, .h_max_out = 640, + }, { + .name = "SECAM", .id = V4L2_STD_SECAM, + .v_offset = 28, .v_field = 288, + .h_offset = 1, .h_pixels = 720, + .v_max_out = 576, .h_max_out = 768, + } +}; + +/* bring hardware to a sane state. this has to be done, just in case someone + wants to capture from this device before it has been properly initialized. + the capture engine would badly fail, because no valid signal arrives on the + saa7146, thus leading to timeouts and stuff. */ +static int hexium_init_done(struct saa7146_dev *dev) +{ + struct hexium *hexium = (struct hexium *) dev->ext_priv; + union i2c_smbus_data data; + int i = 0; + + DEB_D("hexium_init_done called\n"); + + /* initialize the helper ics to useful values */ + for (i = 0; i < sizeof(hexium_ks0127b); i++) { + data.byte = hexium_ks0127b[i]; + if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) { + pr_err("hexium_init_done() failed for address 0x%02x\n", + i); + } + } + + return 0; +} + +static int hexium_set_input(struct hexium *hexium, int input) +{ + union i2c_smbus_data data; + + DEB_D("\n"); + + data.byte = hexium_input_select[input].byte; + if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, hexium_input_select[input].adr, I2C_SMBUS_BYTE_DATA, &data)) { + return -1; + } + + return 0; +} + +static int hexium_set_standard(struct hexium *hexium, struct hexium_data *vdec) +{ + union i2c_smbus_data data; + int i = 0; + + DEB_D("\n"); + + while (vdec[i].adr != -1) { + data.byte = vdec[i].byte; + if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, vdec[i].adr, I2C_SMBUS_BYTE_DATA, &data)) { + pr_err("hexium_init_done: hexium_set_standard() failed for address 0x%02x\n", + i); + return -1; + } + i++; + } + return 0; +} + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index); + + if (i->index >= HEXIUM_INPUTS) + return -EINVAL; + + memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input)); + + DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index); + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct hexium *hexium = (struct hexium *) dev->ext_priv; + + *input = hexium->cur_input; + + DEB_D("VIDIOC_G_INPUT: %d\n", *input); + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct hexium *hexium = (struct hexium *) dev->ext_priv; + + DEB_EE("VIDIOC_S_INPUT %d\n", input); + + if (input >= HEXIUM_INPUTS) + return -EINVAL; + + hexium->cur_input = input; + hexium_set_input(hexium, input); + return 0; +} + +static struct saa7146_ext_vv vv_data; + +/* this function only gets called when the probing was successful */ +static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct hexium *hexium; + int ret; + + DEB_EE("\n"); + + hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL); + if (NULL == hexium) { + pr_err("not enough kernel memory in hexium_attach()\n"); + return -ENOMEM; + } + dev->ext_priv = hexium; + + /* enable i2c-port pins */ + saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26)); + + hexium->i2c_adapter = (struct i2c_adapter) { + .name = "hexium gemini", + }; + saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); + if (i2c_add_adapter(&hexium->i2c_adapter) < 0) { + DEB_S("cannot register i2c-device. skipping.\n"); + kfree(hexium); + return -EFAULT; + } + + /* set HWControl GPIO number 2 */ + saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); + + saa7146_write(dev, DD1_INIT, 0x07000700); + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + /* the rest */ + hexium->cur_input = 0; + hexium_init_done(dev); + + hexium_set_standard(hexium, hexium_pal); + hexium->cur_std = V4L2_STD_PAL; + + hexium_set_input(hexium, 0); + hexium->cur_input = 0; + + saa7146_vv_init(dev, &vv_data); + + vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; + vv_data.vid_ops.vidioc_g_input = vidioc_g_input; + vv_data.vid_ops.vidioc_s_input = vidioc_s_input; + ret = saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_GRABBER); + if (ret < 0) { + pr_err("cannot register capture v4l2 device. skipping.\n"); + return ret; + } + + pr_info("found 'hexium gemini' frame grabber-%d\n", hexium_num); + hexium_num++; + + return 0; +} + +static int hexium_detach(struct saa7146_dev *dev) +{ + struct hexium *hexium = (struct hexium *) dev->ext_priv; + + DEB_EE("dev:%p\n", dev); + + saa7146_unregister_device(&hexium->video_dev, dev); + saa7146_vv_release(dev); + + hexium_num--; + + i2c_del_adapter(&hexium->i2c_adapter); + kfree(hexium); + return 0; +} + +static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *std) +{ + struct hexium *hexium = (struct hexium *) dev->ext_priv; + + if (V4L2_STD_PAL == std->id) { + hexium_set_standard(hexium, hexium_pal); + hexium->cur_std = V4L2_STD_PAL; + return 0; + } else if (V4L2_STD_NTSC == std->id) { + hexium_set_standard(hexium, hexium_ntsc); + hexium->cur_std = V4L2_STD_NTSC; + return 0; + } else if (V4L2_STD_SECAM == std->id) { + hexium_set_standard(hexium, hexium_secam); + hexium->cur_std = V4L2_STD_SECAM; + return 0; + } + + return -1; +} + +static struct saa7146_extension hexium_extension; + +static struct saa7146_pci_extension_data hexium_gemini_4bnc = { + .ext_priv = "Hexium Gemini (4 BNC)", + .ext = &hexium_extension, +}; + +static struct saa7146_pci_extension_data hexium_gemini_dual_4bnc = { + .ext_priv = "Hexium Gemini Dual (4 BNC)", + .ext = &hexium_extension, +}; + +static struct pci_device_id pci_tbl[] = { + { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7146, + .subvendor = 0x17c8, + .subdevice = 0x2401, + .driver_data = (unsigned long) &hexium_gemini_4bnc, + }, + { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7146, + .subvendor = 0x17c8, + .subdevice = 0x2402, + .driver_data = (unsigned long) &hexium_gemini_dual_4bnc, + }, + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_ext_vv vv_data = { + .inputs = HEXIUM_INPUTS, + .capabilities = 0, + .stds = &hexium_standards[0], + .num_stds = sizeof(hexium_standards) / sizeof(struct saa7146_standard), + .std_callback = &std_callback, +}; + +static struct saa7146_extension hexium_extension = { + .name = "hexium gemini", + .flags = SAA7146_USE_I2C_IRQ, + + .pci_tbl = &pci_tbl[0], + .module = THIS_MODULE, + + .attach = hexium_attach, + .detach = hexium_detach, + + .irq_mask = 0, + .irq_func = NULL, +}; + +static int __init hexium_init_module(void) +{ + if (0 != saa7146_register_extension(&hexium_extension)) { + DEB_S("failed to register extension\n"); + return -ENODEV; + } + + return 0; +} + +static void __exit hexium_cleanup_module(void) +{ + saa7146_unregister_extension(&hexium_extension); +} + +module_init(hexium_init_module); +module_exit(hexium_cleanup_module); + +MODULE_DESCRIPTION("video4linux-2 driver for Hexium Gemini frame grabber cards"); +MODULE_AUTHOR("Michael Hunold "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/saa7146/hexium_orion.c b/drivers/media/pci/saa7146/hexium_orion.c new file mode 100644 index 00000000..a1eb26d1 --- /dev/null +++ b/drivers/media/pci/saa7146/hexium_orion.c @@ -0,0 +1,502 @@ +/* + hexium_orion.c - v4l2 driver for the Hexium Orion frame grabber cards + + Visit http://www.mihu.de/linux/saa7146/ and follow the link + to "hexium" for further details about this card. + + Copyright (C) 2003 Michael Hunold + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DEBUG_VARIABLE debug + +#include +#include + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "debug verbosity"); + +/* global variables */ +static int hexium_num; + +#define HEXIUM_HV_PCI6_ORION 1 +#define HEXIUM_ORION_1SVHS_3BNC 2 +#define HEXIUM_ORION_4BNC 3 + +#define HEXIUM_INPUTS 9 +static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = { + { 0, "CVBS 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 1, "CVBS 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 2, "CVBS 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 3, "CVBS 4", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 4, "CVBS 5", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 5, "CVBS 6", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 6, "Y/C 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 7, "Y/C 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { 8, "Y/C 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, +}; + +#define HEXIUM_AUDIOS 0 + +struct hexium_data +{ + s8 adr; + u8 byte; +}; + +struct hexium +{ + int type; + struct video_device *video_dev; + struct i2c_adapter i2c_adapter; + + int cur_input; /* current input */ +}; + +/* Philips SAA7110 decoder default registers */ +static u8 hexium_saa7110[53]={ +/*00*/ 0x4C,0x3C,0x0D,0xEF,0xBD,0xF0,0x00,0x00, +/*08*/ 0xF8,0xF8,0x60,0x60,0x40,0x86,0x18,0x90, +/*10*/ 0x00,0x2C,0x40,0x46,0x42,0x1A,0xFF,0xDA, +/*18*/ 0xF0,0x8B,0x00,0x00,0x00,0x00,0x00,0x00, +/*20*/ 0xD9,0x17,0x40,0x41,0x80,0x41,0x80,0x4F, +/*28*/ 0xFE,0x01,0x0F,0x0F,0x03,0x01,0x81,0x03, +/*30*/ 0x44,0x75,0x01,0x8C,0x03 +}; + +static struct { + struct hexium_data data[8]; +} hexium_input_select[] = { +{ + { /* cvbs 1 */ + { 0x06, 0x00 }, + { 0x20, 0xD9 }, + { 0x21, 0x17 }, // 0x16, + { 0x22, 0x40 }, + { 0x2C, 0x03 }, + { 0x30, 0x44 }, + { 0x31, 0x75 }, // ?? + { 0x21, 0x16 }, // 0x03, + } +}, { + { /* cvbs 2 */ + { 0x06, 0x00 }, + { 0x20, 0x78 }, + { 0x21, 0x07 }, // 0x03, + { 0x22, 0xD2 }, + { 0x2C, 0x83 }, + { 0x30, 0x60 }, + { 0x31, 0xB5 }, // ? + { 0x21, 0x03 }, + } +}, { + { /* cvbs 3 */ + { 0x06, 0x00 }, + { 0x20, 0xBA }, + { 0x21, 0x07 }, // 0x05, + { 0x22, 0x91 }, + { 0x2C, 0x03 }, + { 0x30, 0x60 }, + { 0x31, 0xB5 }, // ?? + { 0x21, 0x05 }, // 0x03, + } +}, { + { /* cvbs 4 */ + { 0x06, 0x00 }, + { 0x20, 0xD8 }, + { 0x21, 0x17 }, // 0x16, + { 0x22, 0x40 }, + { 0x2C, 0x03 }, + { 0x30, 0x44 }, + { 0x31, 0x75 }, // ?? + { 0x21, 0x16 }, // 0x03, + } +}, { + { /* cvbs 5 */ + { 0x06, 0x00 }, + { 0x20, 0xB8 }, + { 0x21, 0x07 }, // 0x05, + { 0x22, 0x91 }, + { 0x2C, 0x03 }, + { 0x30, 0x60 }, + { 0x31, 0xB5 }, // ?? + { 0x21, 0x05 }, // 0x03, + } +}, { + { /* cvbs 6 */ + { 0x06, 0x00 }, + { 0x20, 0x7C }, + { 0x21, 0x07 }, // 0x03 + { 0x22, 0xD2 }, + { 0x2C, 0x83 }, + { 0x30, 0x60 }, + { 0x31, 0xB5 }, // ?? + { 0x21, 0x03 }, + } +}, { + { /* y/c 1 */ + { 0x06, 0x80 }, + { 0x20, 0x59 }, + { 0x21, 0x17 }, + { 0x22, 0x42 }, + { 0x2C, 0xA3 }, + { 0x30, 0x44 }, + { 0x31, 0x75 }, + { 0x21, 0x12 }, + } +}, { + { /* y/c 2 */ + { 0x06, 0x80 }, + { 0x20, 0x9A }, + { 0x21, 0x17 }, + { 0x22, 0xB1 }, + { 0x2C, 0x13 }, + { 0x30, 0x60 }, + { 0x31, 0xB5 }, + { 0x21, 0x14 }, + } +}, { + { /* y/c 3 */ + { 0x06, 0x80 }, + { 0x20, 0x3C }, + { 0x21, 0x27 }, + { 0x22, 0xC1 }, + { 0x2C, 0x23 }, + { 0x30, 0x44 }, + { 0x31, 0x75 }, + { 0x21, 0x21 }, + } +} +}; + +static struct saa7146_standard hexium_standards[] = { + { + .name = "PAL", .id = V4L2_STD_PAL, + .v_offset = 16, .v_field = 288, + .h_offset = 1, .h_pixels = 680, + .v_max_out = 576, .h_max_out = 768, + }, { + .name = "NTSC", .id = V4L2_STD_NTSC, + .v_offset = 16, .v_field = 240, + .h_offset = 1, .h_pixels = 640, + .v_max_out = 480, .h_max_out = 640, + }, { + .name = "SECAM", .id = V4L2_STD_SECAM, + .v_offset = 16, .v_field = 288, + .h_offset = 1, .h_pixels = 720, + .v_max_out = 576, .h_max_out = 768, + } +}; + +/* this is only called for old HV-PCI6/Orion cards + without eeprom */ +static int hexium_probe(struct saa7146_dev *dev) +{ + struct hexium *hexium = NULL; + union i2c_smbus_data data; + int err = 0; + + DEB_EE("\n"); + + /* there are no hexium orion cards with revision 0 saa7146s */ + if (0 == dev->revision) { + return -EFAULT; + } + + hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL); + if (NULL == hexium) { + pr_err("hexium_probe: not enough kernel memory\n"); + return -ENOMEM; + } + + /* enable i2c-port pins */ + saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26)); + + saa7146_write(dev, DD1_INIT, 0x01000100); + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + hexium->i2c_adapter = (struct i2c_adapter) { + .name = "hexium orion", + }; + saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); + if (i2c_add_adapter(&hexium->i2c_adapter) < 0) { + DEB_S("cannot register i2c-device. skipping.\n"); + kfree(hexium); + return -EFAULT; + } + + /* set SAA7110 control GPIO 0 */ + saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI); + /* set HWControl GPIO number 2 */ + saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); + + mdelay(10); + + /* detect newer Hexium Orion cards by subsystem ids */ + if (0x17c8 == dev->pci->subsystem_vendor && 0x0101 == dev->pci->subsystem_device) { + pr_info("device is a Hexium Orion w/ 1 SVHS + 3 BNC inputs\n"); + /* we store the pointer in our private data field */ + dev->ext_priv = hexium; + hexium->type = HEXIUM_ORION_1SVHS_3BNC; + return 0; + } + + if (0x17c8 == dev->pci->subsystem_vendor && 0x2101 == dev->pci->subsystem_device) { + pr_info("device is a Hexium Orion w/ 4 BNC inputs\n"); + /* we store the pointer in our private data field */ + dev->ext_priv = hexium; + hexium->type = HEXIUM_ORION_4BNC; + return 0; + } + + /* check if this is an old hexium Orion card by looking at + a saa7110 at address 0x4e */ + if (0 == (err = i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_READ, 0x00, I2C_SMBUS_BYTE_DATA, &data))) { + pr_info("device is a Hexium HV-PCI6/Orion (old)\n"); + /* we store the pointer in our private data field */ + dev->ext_priv = hexium; + hexium->type = HEXIUM_HV_PCI6_ORION; + return 0; + } + + i2c_del_adapter(&hexium->i2c_adapter); + kfree(hexium); + return -EFAULT; +} + +/* bring hardware to a sane state. this has to be done, just in case someone + wants to capture from this device before it has been properly initialized. + the capture engine would badly fail, because no valid signal arrives on the + saa7146, thus leading to timeouts and stuff. */ +static int hexium_init_done(struct saa7146_dev *dev) +{ + struct hexium *hexium = (struct hexium *) dev->ext_priv; + union i2c_smbus_data data; + int i = 0; + + DEB_D("hexium_init_done called\n"); + + /* initialize the helper ics to useful values */ + for (i = 0; i < sizeof(hexium_saa7110); i++) { + data.byte = hexium_saa7110[i]; + if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) { + pr_err("failed for address 0x%02x\n", i); + } + } + + return 0; +} + +static int hexium_set_input(struct hexium *hexium, int input) +{ + union i2c_smbus_data data; + int i = 0; + + DEB_D("\n"); + + for (i = 0; i < 8; i++) { + int adr = hexium_input_select[input].data[i].adr; + data.byte = hexium_input_select[input].data[i].byte; + if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, adr, I2C_SMBUS_BYTE_DATA, &data)) { + return -1; + } + pr_debug("%d: 0x%02x => 0x%02x\n", input, adr, data.byte); + } + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index); + + if (i->index >= HEXIUM_INPUTS) + return -EINVAL; + + memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input)); + + DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index); + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct hexium *hexium = (struct hexium *) dev->ext_priv; + + *input = hexium->cur_input; + + DEB_D("VIDIOC_G_INPUT: %d\n", *input); + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct hexium *hexium = (struct hexium *) dev->ext_priv; + + if (input >= HEXIUM_INPUTS) + return -EINVAL; + + hexium->cur_input = input; + hexium_set_input(hexium, input); + + return 0; +} + +static struct saa7146_ext_vv vv_data; + +/* this function only gets called when the probing was successful */ +static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct hexium *hexium = (struct hexium *) dev->ext_priv; + + DEB_EE("\n"); + + saa7146_vv_init(dev, &vv_data); + vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; + vv_data.vid_ops.vidioc_g_input = vidioc_g_input; + vv_data.vid_ops.vidioc_s_input = vidioc_s_input; + if (0 != saa7146_register_device(&hexium->video_dev, dev, "hexium orion", VFL_TYPE_GRABBER)) { + pr_err("cannot register capture v4l2 device. skipping.\n"); + return -1; + } + + pr_err("found 'hexium orion' frame grabber-%d\n", hexium_num); + hexium_num++; + + /* the rest */ + hexium->cur_input = 0; + hexium_init_done(dev); + + return 0; +} + +static int hexium_detach(struct saa7146_dev *dev) +{ + struct hexium *hexium = (struct hexium *) dev->ext_priv; + + DEB_EE("dev:%p\n", dev); + + saa7146_unregister_device(&hexium->video_dev, dev); + saa7146_vv_release(dev); + + hexium_num--; + + i2c_del_adapter(&hexium->i2c_adapter); + kfree(hexium); + return 0; +} + +static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *std) +{ + return 0; +} + +static struct saa7146_extension extension; + +static struct saa7146_pci_extension_data hexium_hv_pci6 = { + .ext_priv = "Hexium HV-PCI6 / Orion", + .ext = &extension, +}; + +static struct saa7146_pci_extension_data hexium_orion_1svhs_3bnc = { + .ext_priv = "Hexium HV-PCI6 / Orion (1 SVHS/3 BNC)", + .ext = &extension, +}; + +static struct saa7146_pci_extension_data hexium_orion_4bnc = { + .ext_priv = "Hexium HV-PCI6 / Orion (4 BNC)", + .ext = &extension, +}; + +static struct pci_device_id pci_tbl[] = { + { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7146, + .subvendor = 0x0000, + .subdevice = 0x0000, + .driver_data = (unsigned long) &hexium_hv_pci6, + }, + { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7146, + .subvendor = 0x17c8, + .subdevice = 0x0101, + .driver_data = (unsigned long) &hexium_orion_1svhs_3bnc, + }, + { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7146, + .subvendor = 0x17c8, + .subdevice = 0x2101, + .driver_data = (unsigned long) &hexium_orion_4bnc, + }, + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_ext_vv vv_data = { + .inputs = HEXIUM_INPUTS, + .capabilities = 0, + .stds = &hexium_standards[0], + .num_stds = sizeof(hexium_standards) / sizeof(struct saa7146_standard), + .std_callback = &std_callback, +}; + +static struct saa7146_extension extension = { + .name = "hexium HV-PCI6 Orion", + .flags = 0, // SAA7146_USE_I2C_IRQ, + + .pci_tbl = &pci_tbl[0], + .module = THIS_MODULE, + + .probe = hexium_probe, + .attach = hexium_attach, + .detach = hexium_detach, + + .irq_mask = 0, + .irq_func = NULL, +}; + +static int __init hexium_init_module(void) +{ + if (0 != saa7146_register_extension(&extension)) { + DEB_S("failed to register extension\n"); + return -ENODEV; + } + + return 0; +} + +static void __exit hexium_cleanup_module(void) +{ + saa7146_unregister_extension(&extension); +} + +module_init(hexium_init_module); +module_exit(hexium_cleanup_module); + +MODULE_DESCRIPTION("video4linux-2 driver for Hexium Orion frame grabber cards"); +MODULE_AUTHOR("Michael Hunold "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c new file mode 100644 index 00000000..71e8bead --- /dev/null +++ b/drivers/media/pci/saa7146/mxb.c @@ -0,0 +1,885 @@ +/* + mxb - v4l2 driver for the Multimedia eXtension Board + + Copyright (C) 1998-2006 Michael Hunold + + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html + for further details about this card. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DEBUG_VARIABLE debug + +#include +#include +#include +#include +#include + +#include "tea6415c.h" +#include "tea6420.h" + +#define MXB_AUDIOS 6 + +#define I2C_SAA7111A 0x24 +#define I2C_TDA9840 0x42 +#define I2C_TEA6415C 0x43 +#define I2C_TEA6420_1 0x4c +#define I2C_TEA6420_2 0x4d +#define I2C_TUNER 0x60 + +#define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) + +/* global variable */ +static int mxb_num; + +/* initial frequence the tuner will be tuned to. + in verden (lower saxony, germany) 4148 is a + channel called "phoenix" */ +static int freq = 4148; +module_param(freq, int, 0644); +MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); + +#define MXB_INPUTS 4 +enum { TUNER, AUX1, AUX3, AUX3_YC }; + +static struct v4l2_input mxb_inputs[MXB_INPUTS] = { + { TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 0x3f, 0, + V4L2_STD_PAL_BG | V4L2_STD_PAL_I, 0, V4L2_IN_CAP_STD }, + { AUX1, "AUX1", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, + V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { AUX3, "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, + V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, + { AUX3_YC, "AUX3 S-Video", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, + V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, +}; + +/* this array holds the information, which port of the saa7146 each + input actually uses. the mxb uses port 0 for every input */ +static struct { + int hps_source; + int hps_sync; +} input_port_selection[MXB_INPUTS] = { + { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, + { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, + { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, + { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, +}; + +/* this array holds the information of the audio source (mxb_audios), + which has to be switched corresponding to the video source (mxb_channels) */ +static int video_audio_connect[MXB_INPUTS] = + { 0, 1, 3, 3 }; + +struct mxb_routing { + u32 input; + u32 output; +}; + +/* these are the available audio sources, which can switched + to the line- and cd-output individually */ +static struct v4l2_audio mxb_audios[MXB_AUDIOS] = { + { + .index = 0, + .name = "Tuner", + .capability = V4L2_AUDCAP_STEREO, + } , { + .index = 1, + .name = "AUX1", + .capability = V4L2_AUDCAP_STEREO, + } , { + .index = 2, + .name = "AUX2", + .capability = V4L2_AUDCAP_STEREO, + } , { + .index = 3, + .name = "AUX3", + .capability = V4L2_AUDCAP_STEREO, + } , { + .index = 4, + .name = "Radio (X9)", + .capability = V4L2_AUDCAP_STEREO, + } , { + .index = 5, + .name = "CD-ROM (X10)", + .capability = V4L2_AUDCAP_STEREO, + } +}; + +/* These are the necessary input-output-pins for bringing one audio source + (see above) to the CD-output. Note that gain is set to 0 in this table. */ +static struct mxb_routing TEA6420_cd[MXB_AUDIOS + 1][2] = { + { { 1, 1 }, { 1, 1 } }, /* Tuner */ + { { 5, 1 }, { 6, 1 } }, /* AUX 1 */ + { { 4, 1 }, { 6, 1 } }, /* AUX 2 */ + { { 3, 1 }, { 6, 1 } }, /* AUX 3 */ + { { 1, 1 }, { 3, 1 } }, /* Radio */ + { { 1, 1 }, { 2, 1 } }, /* CD-Rom */ + { { 6, 1 }, { 6, 1 } } /* Mute */ +}; + +/* These are the necessary input-output-pins for bringing one audio source + (see above) to the line-output. Note that gain is set to 0 in this table. */ +static struct mxb_routing TEA6420_line[MXB_AUDIOS + 1][2] = { + { { 2, 3 }, { 1, 2 } }, + { { 5, 3 }, { 6, 2 } }, + { { 4, 3 }, { 6, 2 } }, + { { 3, 3 }, { 6, 2 } }, + { { 2, 3 }, { 3, 2 } }, + { { 2, 3 }, { 2, 2 } }, + { { 6, 3 }, { 6, 2 } } /* Mute */ +}; + +struct mxb +{ + struct video_device *video_dev; + struct video_device *vbi_dev; + + struct i2c_adapter i2c_adapter; + + struct v4l2_subdev *saa7111a; + struct v4l2_subdev *tda9840; + struct v4l2_subdev *tea6415c; + struct v4l2_subdev *tuner; + struct v4l2_subdev *tea6420_1; + struct v4l2_subdev *tea6420_2; + + int cur_mode; /* current audio mode (mono, stereo, ...) */ + int cur_input; /* current input */ + int cur_audinput; /* current audio input */ + int cur_mute; /* current mute status */ + struct v4l2_frequency cur_freq; /* current frequency the tuner is tuned to */ +}; + +#define saa7111a_call(mxb, o, f, args...) \ + v4l2_subdev_call(mxb->saa7111a, o, f, ##args) +#define tda9840_call(mxb, o, f, args...) \ + v4l2_subdev_call(mxb->tda9840, o, f, ##args) +#define tea6415c_call(mxb, o, f, args...) \ + v4l2_subdev_call(mxb->tea6415c, o, f, ##args) +#define tuner_call(mxb, o, f, args...) \ + v4l2_subdev_call(mxb->tuner, o, f, ##args) +#define call_all(dev, o, f, args...) \ + v4l2_device_call_until_err(&dev->v4l2_dev, 0, o, f, ##args) + +static void mxb_update_audmode(struct mxb *mxb) +{ + struct v4l2_tuner t = { + .audmode = mxb->cur_mode, + }; + + tda9840_call(mxb, tuner, s_tuner, &t); +} + +static inline void tea6420_route(struct mxb *mxb, int idx) +{ + v4l2_subdev_call(mxb->tea6420_1, audio, s_routing, + TEA6420_cd[idx][0].input, TEA6420_cd[idx][0].output, 0); + v4l2_subdev_call(mxb->tea6420_2, audio, s_routing, + TEA6420_cd[idx][1].input, TEA6420_cd[idx][1].output, 0); + v4l2_subdev_call(mxb->tea6420_1, audio, s_routing, + TEA6420_line[idx][0].input, TEA6420_line[idx][0].output, 0); + v4l2_subdev_call(mxb->tea6420_2, audio, s_routing, + TEA6420_line[idx][1].input, TEA6420_line[idx][1].output, 0); +} + +static struct saa7146_extension extension; + +static int mxb_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct saa7146_dev *dev = container_of(ctrl->handler, + struct saa7146_dev, ctrl_handler); + struct mxb *mxb = dev->ext_priv; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + mxb->cur_mute = ctrl->val; + /* switch the audio-source */ + tea6420_route(mxb, ctrl->val ? 6 : + video_audio_connect[mxb->cur_input]); + break; + default: + return -EINVAL; + } + return 0; +} + +static const struct v4l2_ctrl_ops mxb_ctrl_ops = { + .s_ctrl = mxb_s_ctrl, +}; + +static int mxb_probe(struct saa7146_dev *dev) +{ + struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; + struct mxb *mxb = NULL; + + v4l2_ctrl_new_std(hdl, &mxb_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); + if (hdl->error) + return hdl->error; + mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL); + if (mxb == NULL) { + DEB_D("not enough kernel memory\n"); + return -ENOMEM; + } + + + snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num); + + saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); + if (i2c_add_adapter(&mxb->i2c_adapter) < 0) { + DEB_S("cannot register i2c-device. skipping.\n"); + kfree(mxb); + return -EFAULT; + } + + mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, + "saa7111", I2C_SAA7111A, NULL); + mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, + "tea6420", I2C_TEA6420_1, NULL); + mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, + "tea6420", I2C_TEA6420_2, NULL); + mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, + "tea6415c", I2C_TEA6415C, NULL); + mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, + "tda9840", I2C_TDA9840, NULL); + mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, + "tuner", I2C_TUNER, NULL); + + /* check if all devices are present */ + if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c || + !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) { + pr_err("did not find all i2c devices. aborting\n"); + i2c_del_adapter(&mxb->i2c_adapter); + kfree(mxb); + return -ENODEV; + } + + /* all devices are present, probe was successful */ + + /* we store the pointer in our private data field */ + dev->ext_priv = mxb; + + v4l2_ctrl_handler_setup(hdl); + + return 0; +} + +/* some init data for the saa7740, the so-called 'sound arena module'. + there are no specs available, so we simply use some init values */ +static struct { + int length; + char data[9]; +} mxb_saa7740_init[] = { + { 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } }, + { 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } }, + { 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } }, + { 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } }, + { 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } }, + { 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } }, + { 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } }, + { 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } }, + { 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } }, + { 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } }, + { 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } }, + { 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } }, + { 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } }, + { 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } }, + { 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } }, + { 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } }, + { 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } }, + { 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } }, + { 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } }, + { 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } }, + { 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } }, + { 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } }, + { 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } }, + { 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } }, + { 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } }, + { 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } }, + { 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } }, + { 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } }, + { 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } }, + { 3, { 0x48, 0x00, 0x01 } }, + { 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, + { 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, + { 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, + { 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, + { 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, + { 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, + { 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, + { 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, + { 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, + { 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, + { 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, + { 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, + { 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, + { 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, + { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, + { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, + { 3, { 0x80, 0xb3, 0x0a } }, + {-1, { 0 } } +}; + +/* bring hardware to a sane state. this has to be done, just in case someone + wants to capture from this device before it has been properly initialized. + the capture engine would badly fail, because no valid signal arrives on the + saa7146, thus leading to timeouts and stuff. */ +static int mxb_init_done(struct saa7146_dev* dev) +{ + struct mxb* mxb = (struct mxb*)dev->ext_priv; + struct i2c_msg msg; + struct tuner_setup tun_setup; + v4l2_std_id std = V4L2_STD_PAL_BG; + + int i = 0, err = 0; + + /* mute audio on tea6420s */ + tea6420_route(mxb, 6); + + /* select video mode in saa7111a */ + saa7111a_call(mxb, core, s_std, std); + + /* select tuner-output on saa7111a */ + i = 0; + saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0, + SAA7111_FMT_CCIR, 0); + + /* select a tuner type */ + tun_setup.mode_mask = T_ANALOG_TV; + tun_setup.addr = ADDR_UNSET; + tun_setup.type = TUNER_PHILIPS_PAL; + tuner_call(mxb, tuner, s_type_addr, &tun_setup); + /* tune in some frequency on tuner */ + mxb->cur_freq.tuner = 0; + mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV; + mxb->cur_freq.frequency = freq; + tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq); + + /* set a default video standard */ + /* These two gpio calls set the GPIO pins that control the tda9820 */ + saa7146_write(dev, GPIO_CTRL, 0x00404050); + saa7111a_call(mxb, core, s_gpio, 1); + saa7111a_call(mxb, core, s_std, std); + tuner_call(mxb, core, s_std, std); + + /* switch to tuner-channel on tea6415c */ + tea6415c_call(mxb, video, s_routing, 3, 17, 0); + + /* select tuner-output on multicable on tea6415c */ + tea6415c_call(mxb, video, s_routing, 3, 13, 0); + + /* the rest for mxb */ + mxb->cur_input = 0; + mxb->cur_audinput = video_audio_connect[mxb->cur_input]; + mxb->cur_mute = 1; + + mxb->cur_mode = V4L2_TUNER_MODE_STEREO; + mxb_update_audmode(mxb); + + /* check if the saa7740 (aka 'sound arena module') is present + on the mxb. if so, we must initialize it. due to lack of + informations about the saa7740, the values were reverse + engineered. */ + msg.addr = 0x1b; + msg.flags = 0; + msg.len = mxb_saa7740_init[0].length; + msg.buf = &mxb_saa7740_init[0].data[0]; + + err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); + if (err == 1) { + /* the sound arena module is a pos, that's probably the reason + philips refuses to hand out a datasheet for the saa7740... + it seems to screw up the i2c bus, so we disable fast irq + based i2c transactions here and rely on the slow and safe + polling method ... */ + extension.flags &= ~SAA7146_USE_I2C_IRQ; + for (i = 1; ; i++) { + if (-1 == mxb_saa7740_init[i].length) + break; + + msg.len = mxb_saa7740_init[i].length; + msg.buf = &mxb_saa7740_init[i].data[0]; + err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); + if (err != 1) { + DEB_D("failed to initialize 'sound arena module'\n"); + goto err; + } + } + pr_info("'sound arena module' detected\n"); + } +err: + /* the rest for saa7146: you should definitely set some basic values + for the input-port handling of the saa7146. */ + + /* ext->saa has been filled by the core driver */ + + /* some stuff is done via variables */ + saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, + input_port_selection[mxb->cur_input].hps_sync); + + /* some stuff is done via direct write to the registers */ + + /* this is ugly, but because of the fact that this is completely + hardware dependend, it should be done directly... */ + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, DD1_INIT, 0x02000200); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + return 0; +} + +/* interrupt-handler. this gets called when irq_mask is != 0. + it must clear the interrupt-bits in irq_mask it has handled */ +/* +void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask) +{ + struct mxb* mxb = (struct mxb*)dev->ext_priv; +} +*/ + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index); + if (i->index >= MXB_INPUTS) + return -EINVAL; + memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input)); + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct mxb *mxb = (struct mxb *)dev->ext_priv; + *i = mxb->cur_input; + + DEB_EE("VIDIOC_G_INPUT %d\n", *i); + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct mxb *mxb = (struct mxb *)dev->ext_priv; + int err = 0; + int i = 0; + + DEB_EE("VIDIOC_S_INPUT %d\n", input); + + if (input >= MXB_INPUTS) + return -EINVAL; + + mxb->cur_input = input; + + saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, + input_port_selection[input].hps_sync); + + /* prepare switching of tea6415c and saa7111a; + have a look at the 'background'-file for further informations */ + switch (input) { + case TUNER: + i = SAA7115_COMPOSITE0; + + err = tea6415c_call(mxb, video, s_routing, 3, 17, 0); + + /* connect tuner-output always to multicable */ + if (!err) + err = tea6415c_call(mxb, video, s_routing, 3, 13, 0); + break; + case AUX3_YC: + /* nothing to be done here. aux3_yc is + directly connected to the saa711a */ + i = SAA7115_SVIDEO1; + break; + case AUX3: + /* nothing to be done here. aux3 is + directly connected to the saa711a */ + i = SAA7115_COMPOSITE1; + break; + case AUX1: + i = SAA7115_COMPOSITE0; + err = tea6415c_call(mxb, video, s_routing, 1, 17, 0); + break; + } + + if (err) + return err; + + /* switch video in saa7111a */ + if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0)) + pr_err("VIDIOC_S_INPUT: could not address saa7111a\n"); + + mxb->cur_audinput = video_audio_connect[input]; + /* switch the audio-source only if necessary */ + if (0 == mxb->cur_mute) + tea6420_route(mxb, mxb->cur_audinput); + if (mxb->cur_audinput == 0) + mxb_update_audmode(mxb); + + return 0; +} + +static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct mxb *mxb = (struct mxb *)dev->ext_priv; + + if (t->index) { + DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n", + t->index); + return -EINVAL; + } + + DEB_EE("VIDIOC_G_TUNER: %d\n", t->index); + + memset(t, 0, sizeof(*t)); + strlcpy(t->name, "TV Tuner", sizeof(t->name)); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; + t->audmode = mxb->cur_mode; + return call_all(dev, tuner, g_tuner, t); +} + +static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct mxb *mxb = (struct mxb *)dev->ext_priv; + + if (t->index) { + DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n", + t->index); + return -EINVAL; + } + + mxb->cur_mode = t->audmode; + return call_all(dev, tuner, s_tuner, t); +} + +static int vidioc_querystd(struct file *file, void *fh, v4l2_std_id *norm) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + + return call_all(dev, video, querystd, norm); +} + +static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct mxb *mxb = (struct mxb *)dev->ext_priv; + + if (f->tuner) + return -EINVAL; + *f = mxb->cur_freq; + + DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency); + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct mxb *mxb = (struct mxb *)dev->ext_priv; + struct saa7146_vv *vv = dev->vv_data; + + if (f->tuner) + return -EINVAL; + + if (V4L2_TUNER_ANALOG_TV != f->type) + return -EINVAL; + + DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency); + + /* tune in desired frequency */ + tuner_call(mxb, tuner, s_frequency, f); + /* let the tuner subdev clamp the frequency to the tuner range */ + mxb->cur_freq = *f; + tuner_call(mxb, tuner, g_frequency, &mxb->cur_freq); + if (mxb->cur_audinput == 0) + mxb_update_audmode(mxb); + + if (mxb->cur_input) + return 0; + + /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */ + spin_lock(&dev->slock); + vv->vbi_fieldcount = 0; + spin_unlock(&dev->slock); + + return 0; +} + +static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a) +{ + if (a->index >= MXB_AUDIOS) + return -EINVAL; + *a = mxb_audios[a->index]; + return 0; +} + +static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct mxb *mxb = (struct mxb *)dev->ext_priv; + + DEB_EE("VIDIOC_G_AUDIO\n"); + *a = mxb_audios[mxb->cur_audinput]; + return 0; +} + +static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct mxb *mxb = (struct mxb *)dev->ext_priv; + + DEB_D("VIDIOC_S_AUDIO %d\n", a->index); + if (mxb_inputs[mxb->cur_input].audioset & (1 << a->index)) { + if (mxb->cur_audinput != a->index) { + mxb->cur_audinput = a->index; + tea6420_route(mxb, a->index); + if (mxb->cur_audinput == 0) + mxb_update_audmode(mxb); + } + return 0; + } + return -EINVAL; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (v4l2_chip_match_host(®->match)) { + reg->val = saa7146_read(dev, reg->reg); + reg->size = 4; + return 0; + } + call_all(dev, core, g_register, reg); + return 0; +} + +static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (v4l2_chip_match_host(®->match)) { + saa7146_write(dev, reg->reg, reg->val); + return 0; + } + return call_all(dev, core, s_register, reg); +} +#endif + +static struct saa7146_ext_vv vv_data; + +/* this function only gets called when the probing was successful */ +static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct mxb *mxb; + + DEB_EE("dev:%p\n", dev); + + saa7146_vv_init(dev, &vv_data); + if (mxb_probe(dev)) { + saa7146_vv_release(dev); + return -1; + } + mxb = (struct mxb *)dev->ext_priv; + + vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; + vv_data.vid_ops.vidioc_g_input = vidioc_g_input; + vv_data.vid_ops.vidioc_s_input = vidioc_s_input; + vv_data.vid_ops.vidioc_querystd = vidioc_querystd; + vv_data.vid_ops.vidioc_g_tuner = vidioc_g_tuner; + vv_data.vid_ops.vidioc_s_tuner = vidioc_s_tuner; + vv_data.vid_ops.vidioc_g_frequency = vidioc_g_frequency; + vv_data.vid_ops.vidioc_s_frequency = vidioc_s_frequency; + vv_data.vid_ops.vidioc_enumaudio = vidioc_enumaudio; + vv_data.vid_ops.vidioc_g_audio = vidioc_g_audio; + vv_data.vid_ops.vidioc_s_audio = vidioc_s_audio; +#ifdef CONFIG_VIDEO_ADV_DEBUG + vv_data.vid_ops.vidioc_g_register = vidioc_g_register; + vv_data.vid_ops.vidioc_s_register = vidioc_s_register; +#endif + if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) { + ERR("cannot register capture v4l2 device. skipping.\n"); + saa7146_vv_release(dev); + return -1; + } + + /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ + if (MXB_BOARD_CAN_DO_VBI(dev)) { + if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { + ERR("cannot register vbi v4l2 device. skipping.\n"); + } + } + + pr_info("found Multimedia eXtension Board #%d\n", mxb_num); + + mxb_num++; + mxb_init_done(dev); + return 0; +} + +static int mxb_detach(struct saa7146_dev *dev) +{ + struct mxb *mxb = (struct mxb *)dev->ext_priv; + + DEB_EE("dev:%p\n", dev); + + /* mute audio on tea6420s */ + tea6420_route(mxb, 6); + + saa7146_unregister_device(&mxb->video_dev,dev); + if (MXB_BOARD_CAN_DO_VBI(dev)) + saa7146_unregister_device(&mxb->vbi_dev, dev); + saa7146_vv_release(dev); + + mxb_num--; + + i2c_del_adapter(&mxb->i2c_adapter); + kfree(mxb); + + return 0; +} + +static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard) +{ + struct mxb *mxb = (struct mxb *)dev->ext_priv; + + if (V4L2_STD_PAL_I == standard->id) { + v4l2_std_id std = V4L2_STD_PAL_I; + + DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n"); + /* These two gpio calls set the GPIO pins that control the tda9820 */ + saa7146_write(dev, GPIO_CTRL, 0x00404050); + saa7111a_call(mxb, core, s_gpio, 0); + saa7111a_call(mxb, core, s_std, std); + if (mxb->cur_input == 0) + tuner_call(mxb, core, s_std, std); + } else { + v4l2_std_id std = V4L2_STD_PAL_BG; + + if (mxb->cur_input) + std = standard->id; + DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n"); + /* These two gpio calls set the GPIO pins that control the tda9820 */ + saa7146_write(dev, GPIO_CTRL, 0x00404050); + saa7111a_call(mxb, core, s_gpio, 1); + saa7111a_call(mxb, core, s_std, std); + if (mxb->cur_input == 0) + tuner_call(mxb, core, s_std, std); + } + return 0; +} + +static struct saa7146_standard standard[] = { + { + .name = "PAL-BG", .id = V4L2_STD_PAL_BG, + .v_offset = 0x17, .v_field = 288, + .h_offset = 0x14, .h_pixels = 680, + .v_max_out = 576, .h_max_out = 768, + }, { + .name = "PAL-I", .id = V4L2_STD_PAL_I, + .v_offset = 0x17, .v_field = 288, + .h_offset = 0x14, .h_pixels = 680, + .v_max_out = 576, .h_max_out = 768, + }, { + .name = "NTSC", .id = V4L2_STD_NTSC, + .v_offset = 0x16, .v_field = 240, + .h_offset = 0x06, .h_pixels = 708, + .v_max_out = 480, .h_max_out = 640, + }, { + .name = "SECAM", .id = V4L2_STD_SECAM, + .v_offset = 0x14, .v_field = 288, + .h_offset = 0x14, .h_pixels = 720, + .v_max_out = 576, .h_max_out = 768, + } +}; + +static struct saa7146_pci_extension_data mxb = { + .ext_priv = "Multimedia eXtension Board", + .ext = &extension, +}; + +static struct pci_device_id pci_tbl[] = { + { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7146, + .subvendor = 0x0000, + .subdevice = 0x0000, + .driver_data = (unsigned long)&mxb, + }, { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_ext_vv vv_data = { + .inputs = MXB_INPUTS, + .capabilities = V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_AUDIO, + .stds = &standard[0], + .num_stds = sizeof(standard)/sizeof(struct saa7146_standard), + .std_callback = &std_callback, +}; + +static struct saa7146_extension extension = { + .name = "Multimedia eXtension Board", + .flags = SAA7146_USE_I2C_IRQ, + + .pci_tbl = &pci_tbl[0], + .module = THIS_MODULE, + + .attach = mxb_attach, + .detach = mxb_detach, + + .irq_mask = 0, + .irq_func = NULL, +}; + +static int __init mxb_init_module(void) +{ + if (saa7146_register_extension(&extension)) { + DEB_S("failed to register extension\n"); + return -ENODEV; + } + + return 0; +} + +static void __exit mxb_cleanup_module(void) +{ + saa7146_unregister_extension(&extension); +} + +module_init(mxb_init_module); +module_exit(mxb_cleanup_module); + +MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'"); +MODULE_AUTHOR("Michael Hunold "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/saa7164/Kconfig b/drivers/media/pci/saa7164/Kconfig new file mode 100644 index 00000000..a53db7d1 --- /dev/null +++ b/drivers/media/pci/saa7164/Kconfig @@ -0,0 +1,18 @@ +config VIDEO_SAA7164 + tristate "NXP SAA7164 support" + depends on DVB_CORE && VIDEO_DEV && PCI && I2C + select I2C_ALGOBIT + select FW_LOADER + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEOBUF_DVB + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This is a video4linux driver for NXP SAA7164 based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called saa7164 + diff --git a/drivers/media/pci/saa7164/Makefile b/drivers/media/pci/saa7164/Makefile new file mode 100644 index 00000000..ba0e33a1 --- /dev/null +++ b/drivers/media/pci/saa7164/Makefile @@ -0,0 +1,12 @@ +saa7164-objs := saa7164-cards.o saa7164-core.o saa7164-i2c.o saa7164-dvb.o \ + saa7164-fw.o saa7164-bus.o saa7164-cmd.o saa7164-api.o \ + saa7164-buffer.o saa7164-encoder.o saa7164-vbi.o + +obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o + +ccflags-y += -I$(srctree)/drivers/media/i2c +ccflags-y += -I$(srctree)/drivers/media/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends + +ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/pci/saa7164/saa7164-api.c b/drivers/media/pci/saa7164/saa7164-api.c new file mode 100644 index 00000000..e042963d --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-api.c @@ -0,0 +1,1526 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include "saa7164.h" + +int saa7164_api_get_load_info(struct saa7164_dev *dev, struct tmFwInfoStruct *i) +{ + int ret; + + if (!(saa_debug & DBGLVL_CPU)) + return 0; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + i->deviceinst = 0; + i->devicespec = 0; + i->mode = 0; + i->status = 0; + + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_FW_STATUS_CONTROL, sizeof(struct tmFwInfoStruct), i); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + printk(KERN_INFO "saa7164[%d]-CPU: %d percent", dev->nr, i->CPULoad); + + return ret; +} + +int saa7164_api_collect_debug(struct saa7164_dev *dev) +{ + struct tmComResDebugGetData d; + u8 more = 255; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + while (more--) { + + memset(&d, 0, sizeof(d)); + + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_DEBUG_DATA_CONTROL, sizeof(d), &d); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", + __func__, ret); + + if (d.dwResult != SAA_OK) + break; + + printk(KERN_INFO "saa7164[%d]-FWMSG: %s", dev->nr, + d.ucDebugData); + } + + return 0; +} + +int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level) +{ + struct tmComResDebugSetLevel lvl; + int ret; + + dprintk(DBGLVL_API, "%s(level=%d)\n", __func__, level); + + /* Retrieve current state */ + ret = saa7164_cmd_send(dev, 0, GET_CUR, + SET_DEBUG_LEVEL_CONTROL, sizeof(lvl), &lvl); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_API, "%s() Was %d\n", __func__, lvl.dwDebugLevel); + + lvl.dwDebugLevel = level; + + /* set new state */ + ret = saa7164_cmd_send(dev, 0, SET_CUR, + SET_DEBUG_LEVEL_CONTROL, sizeof(lvl), &lvl); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_set_vbi_format(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct tmComResProbeCommit fmt, rsp; + int ret; + + dprintk(DBGLVL_API, "%s(nr=%d, unitid=0x%x)\n", __func__, + port->nr, port->hwcfg.unitid); + + fmt.bmHint = 0; + fmt.bFormatIndex = 1; + fmt.bFrameIndex = 1; + + /* Probe, see if it can support this format */ + ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, + SET_CUR, SAA_PROBE_CONTROL, sizeof(fmt), &fmt); + if (ret != SAA_OK) + printk(KERN_ERR "%s() set error, ret = 0x%x\n", __func__, ret); + + /* See of the format change was successful */ + ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, + GET_CUR, SAA_PROBE_CONTROL, sizeof(rsp), &rsp); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() get error, ret = 0x%x\n", __func__, ret); + } else { + /* Compare requested vs received, should be same */ + if (memcmp(&fmt, &rsp, sizeof(rsp)) == 0) { + dprintk(DBGLVL_API, "SET/PROBE Verified\n"); + + /* Ask the device to select the negotiated format */ + ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, + SET_CUR, SAA_COMMIT_CONTROL, sizeof(fmt), &fmt); + if (ret != SAA_OK) + printk(KERN_ERR "%s() commit error, ret = 0x%x\n", + __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, + GET_CUR, SAA_COMMIT_CONTROL, sizeof(rsp), &rsp); + if (ret != SAA_OK) + printk(KERN_ERR "%s() GET commit error, ret = 0x%x\n", + __func__, ret); + + if (memcmp(&fmt, &rsp, sizeof(rsp)) != 0) { + printk(KERN_ERR "%s() memcmp error, ret = 0x%x\n", + __func__, ret); + } else + dprintk(DBGLVL_API, "SET/COMMIT Verified\n"); + + dprintk(DBGLVL_API, "rsp.bmHint = 0x%x\n", rsp.bmHint); + dprintk(DBGLVL_API, "rsp.bFormatIndex = 0x%x\n", + rsp.bFormatIndex); + dprintk(DBGLVL_API, "rsp.bFrameIndex = 0x%x\n", + rsp.bFrameIndex); + } else + printk(KERN_ERR "%s() compare failed\n", __func__); + } + + if (ret == SAA_OK) + dprintk(DBGLVL_API, "%s(nr=%d) Success\n", __func__, port->nr); + + return ret; +} + +static int saa7164_api_set_gop_size(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct tmComResEncVideoGopStructure gs; + int ret; + + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + gs.ucRefFrameDist = port->encoder_params.refdist; + gs.ucGOPSize = port->encoder_params.gop_size; + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, + EU_VIDEO_GOP_STRUCTURE_CONTROL, + sizeof(gs), &gs); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_set_encoder(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct tmComResEncVideoBitRate vb; + struct tmComResEncAudioBitRate ab; + int ret; + + dprintk(DBGLVL_ENC, "%s() unitid=0x%x\n", __func__, + port->hwcfg.sourceid); + + if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS) + port->encoder_profile = EU_PROFILE_PS_DVD; + else + port->encoder_profile = EU_PROFILE_TS_HQ; + + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, + EU_PROFILE_CONTROL, sizeof(u8), &port->encoder_profile); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Resolution */ + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, + EU_PROFILE_CONTROL, sizeof(u8), &port->encoder_profile); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Establish video bitrates */ + if (port->encoder_params.bitrate_mode == + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) + vb.ucVideoBitRateMode = EU_VIDEO_BIT_RATE_MODE_CONSTANT; + else + vb.ucVideoBitRateMode = EU_VIDEO_BIT_RATE_MODE_VARIABLE_PEAK; + vb.dwVideoBitRate = port->encoder_params.bitrate; + vb.dwVideoBitRatePeak = port->encoder_params.bitrate_peak; + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, + EU_VIDEO_BIT_RATE_CONTROL, + sizeof(struct tmComResEncVideoBitRate), + &vb); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Establish audio bitrates */ + ab.ucAudioBitRateMode = 0; + ab.dwAudioBitRate = 384000; + ab.dwAudioBitRatePeak = ab.dwAudioBitRate; + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, + EU_AUDIO_BIT_RATE_CONTROL, + sizeof(struct tmComResEncAudioBitRate), + &ab); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, + ret); + + saa7164_api_set_aspect_ratio(port); + saa7164_api_set_gop_size(port); + + return ret; +} + +int saa7164_api_get_encoder(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct tmComResEncVideoBitRate v; + struct tmComResEncAudioBitRate a; + struct tmComResEncVideoInputAspectRatio ar; + int ret; + + dprintk(DBGLVL_ENC, "%s() unitid=0x%x\n", __func__, + port->hwcfg.sourceid); + + port->encoder_profile = 0; + port->video_format = 0; + port->video_resolution = 0; + port->audio_format = 0; + + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, + EU_PROFILE_CONTROL, sizeof(u8), &port->encoder_profile); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, + EU_VIDEO_RESOLUTION_CONTROL, sizeof(u8), + &port->video_resolution); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, + EU_VIDEO_FORMAT_CONTROL, sizeof(u8), &port->video_format); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, + EU_VIDEO_BIT_RATE_CONTROL, sizeof(v), &v); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, + EU_AUDIO_FORMAT_CONTROL, sizeof(u8), &port->audio_format); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, + EU_AUDIO_BIT_RATE_CONTROL, sizeof(a), &a); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Aspect Ratio */ + ar.width = 0; + ar.height = 0; + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, + EU_VIDEO_INPUT_ASPECT_CONTROL, + sizeof(struct tmComResEncVideoInputAspectRatio), &ar); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_ENC, "encoder_profile = %d\n", port->encoder_profile); + dprintk(DBGLVL_ENC, "video_format = %d\n", port->video_format); + dprintk(DBGLVL_ENC, "audio_format = %d\n", port->audio_format); + dprintk(DBGLVL_ENC, "video_resolution= %d\n", port->video_resolution); + dprintk(DBGLVL_ENC, "v.ucVideoBitRateMode = %d\n", + v.ucVideoBitRateMode); + dprintk(DBGLVL_ENC, "v.dwVideoBitRate = %d\n", + v.dwVideoBitRate); + dprintk(DBGLVL_ENC, "v.dwVideoBitRatePeak = %d\n", + v.dwVideoBitRatePeak); + dprintk(DBGLVL_ENC, "a.ucVideoBitRateMode = %d\n", + a.ucAudioBitRateMode); + dprintk(DBGLVL_ENC, "a.dwVideoBitRate = %d\n", + a.dwAudioBitRate); + dprintk(DBGLVL_ENC, "a.dwVideoBitRatePeak = %d\n", + a.dwAudioBitRatePeak); + dprintk(DBGLVL_ENC, "aspect.width / height = %d:%d\n", + ar.width, ar.height); + + return ret; +} + +int saa7164_api_set_aspect_ratio(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct tmComResEncVideoInputAspectRatio ar; + int ret; + + dprintk(DBGLVL_ENC, "%s(%d)\n", __func__, + port->encoder_params.ctl_aspect); + + switch (port->encoder_params.ctl_aspect) { + case V4L2_MPEG_VIDEO_ASPECT_1x1: + ar.width = 1; + ar.height = 1; + break; + case V4L2_MPEG_VIDEO_ASPECT_4x3: + ar.width = 4; + ar.height = 3; + break; + case V4L2_MPEG_VIDEO_ASPECT_16x9: + ar.width = 16; + ar.height = 9; + break; + case V4L2_MPEG_VIDEO_ASPECT_221x100: + ar.width = 221; + ar.height = 100; + break; + default: + BUG(); + } + + dprintk(DBGLVL_ENC, "%s(%d) now %d:%d\n", __func__, + port->encoder_params.ctl_aspect, + ar.width, ar.height); + + /* Aspect Ratio */ + ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, + EU_VIDEO_INPUT_ASPECT_CONTROL, + sizeof(struct tmComResEncVideoInputAspectRatio), &ar); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_set_usercontrol(struct saa7164_port *port, u8 ctl) +{ + struct saa7164_dev *dev = port->dev; + int ret; + u16 val; + + if (ctl == PU_BRIGHTNESS_CONTROL) + val = port->ctl_brightness; + else + if (ctl == PU_CONTRAST_CONTROL) + val = port->ctl_contrast; + else + if (ctl == PU_HUE_CONTROL) + val = port->ctl_hue; + else + if (ctl == PU_SATURATION_CONTROL) + val = port->ctl_saturation; + else + if (ctl == PU_SHARPNESS_CONTROL) + val = port->ctl_sharpness; + else + return -EINVAL; + + dprintk(DBGLVL_ENC, "%s() unitid=0x%x ctl=%d, val=%d\n", + __func__, port->encunit.vsourceid, ctl, val); + + ret = saa7164_cmd_send(port->dev, port->encunit.vsourceid, SET_CUR, + ctl, sizeof(u16), &val); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_get_usercontrol(struct saa7164_port *port, u8 ctl) +{ + struct saa7164_dev *dev = port->dev; + int ret; + u16 val; + + ret = saa7164_cmd_send(port->dev, port->encunit.vsourceid, GET_CUR, + ctl, sizeof(u16), &val); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + return ret; + } + + dprintk(DBGLVL_ENC, "%s() ctl=%d, val=%d\n", + __func__, ctl, val); + + if (ctl == PU_BRIGHTNESS_CONTROL) + port->ctl_brightness = val; + else + if (ctl == PU_CONTRAST_CONTROL) + port->ctl_contrast = val; + else + if (ctl == PU_HUE_CONTROL) + port->ctl_hue = val; + else + if (ctl == PU_SATURATION_CONTROL) + port->ctl_saturation = val; + else + if (ctl == PU_SHARPNESS_CONTROL) + port->ctl_sharpness = val; + + return ret; +} + +int saa7164_api_set_videomux(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + u8 inputs[] = { 1, 2, 2, 2, 5, 5, 5 }; + int ret; + + dprintk(DBGLVL_ENC, "%s() v_mux=%d a_mux=%d\n", + __func__, port->mux_input, inputs[port->mux_input - 1]); + + /* Audio Mute */ + ret = saa7164_api_audio_mute(port, 1); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Video Mux */ + ret = saa7164_cmd_send(port->dev, port->vidproc.sourceid, SET_CUR, + SU_INPUT_SELECT_CONTROL, sizeof(u8), &port->mux_input); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Audio Mux */ + ret = saa7164_cmd_send(port->dev, port->audfeat.sourceid, SET_CUR, + SU_INPUT_SELECT_CONTROL, sizeof(u8), + &inputs[port->mux_input - 1]); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Audio UnMute */ + ret = saa7164_api_audio_mute(port, 0); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_audio_mute(struct saa7164_port *port, int mute) +{ + struct saa7164_dev *dev = port->dev; + u8 v = mute; + int ret; + + dprintk(DBGLVL_API, "%s(%d)\n", __func__, mute); + + ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR, + MUTE_CONTROL, sizeof(u8), &v); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +/* 0 = silence, 0xff = full */ +int saa7164_api_set_audio_volume(struct saa7164_port *port, s8 level) +{ + struct saa7164_dev *dev = port->dev; + s16 v, min, max; + int ret; + + dprintk(DBGLVL_API, "%s(%d)\n", __func__, level); + + /* Obtain the min/max ranges */ + ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, GET_MIN, + VOLUME_CONTROL, sizeof(u16), &min); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, GET_MAX, + VOLUME_CONTROL, sizeof(u16), &max); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, GET_CUR, + (0x01 << 8) | VOLUME_CONTROL, sizeof(u16), &v); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__, + level, min, max, v); + + v = level; + if (v < min) + v = min; + if (v > max) + v = max; + + /* Left */ + ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR, + (0x01 << 8) | VOLUME_CONTROL, sizeof(s16), &v); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Right */ + ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR, + (0x02 << 8) | VOLUME_CONTROL, sizeof(s16), &v); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, GET_CUR, + (0x01 << 8) | VOLUME_CONTROL, sizeof(u16), &v); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__, + level, min, max, v); + + return ret; +} + +int saa7164_api_set_audio_std(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct tmComResAudioDefaults lvl; + struct tmComResTunerStandard tvaudio; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + /* Establish default levels */ + lvl.ucDecoderLevel = TMHW_LEV_ADJ_DECLEV_DEFAULT; + lvl.ucDecoderFM_Level = TMHW_LEV_ADJ_DECLEV_DEFAULT; + lvl.ucMonoLevel = TMHW_LEV_ADJ_MONOLEV_DEFAULT; + lvl.ucNICAM_Level = TMHW_LEV_ADJ_NICLEV_DEFAULT; + lvl.ucSAP_Level = TMHW_LEV_ADJ_SAPLEV_DEFAULT; + lvl.ucADC_Level = TMHW_LEV_ADJ_ADCLEV_DEFAULT; + ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR, + AUDIO_DEFAULT_CONTROL, sizeof(struct tmComResAudioDefaults), + &lvl); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + /* Manually select the appropriate TV audio standard */ + if (port->encodernorm.id & V4L2_STD_NTSC) { + tvaudio.std = TU_STANDARD_NTSC_M; + tvaudio.country = 1; + } else { + tvaudio.std = TU_STANDARD_PAL_I; + tvaudio.country = 44; + } + + ret = saa7164_cmd_send(port->dev, port->tunerunit.unitid, SET_CUR, + TU_STANDARD_CONTROL, sizeof(tvaudio), &tvaudio); + if (ret != SAA_OK) + printk(KERN_ERR "%s() TU_STANDARD_CONTROL error, ret = 0x%x\n", + __func__, ret); + return ret; +} + +int saa7164_api_set_audio_detection(struct saa7164_port *port, int autodetect) +{ + struct saa7164_dev *dev = port->dev; + struct tmComResTunerStandardAuto p; + int ret; + + dprintk(DBGLVL_API, "%s(%d)\n", __func__, autodetect); + + /* Disable TV Audio autodetect if not already set (buggy) */ + if (autodetect) + p.mode = TU_STANDARD_AUTO; + else + p.mode = TU_STANDARD_MANUAL; + ret = saa7164_cmd_send(port->dev, port->tunerunit.unitid, SET_CUR, + TU_STANDARD_AUTO_CONTROL, sizeof(p), &p); + if (ret != SAA_OK) + printk(KERN_ERR + "%s() TU_STANDARD_AUTO_CONTROL error, ret = 0x%x\n", + __func__, ret); + + return ret; +} + +int saa7164_api_get_videomux(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_cmd_send(port->dev, port->vidproc.sourceid, GET_CUR, + SU_INPUT_SELECT_CONTROL, sizeof(u8), &port->mux_input); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_ENC, "%s() v_mux=%d\n", + __func__, port->mux_input); + + return ret; +} + +static int saa7164_api_set_dif(struct saa7164_port *port, u8 reg, u8 val) +{ + struct saa7164_dev *dev = port->dev; + + u16 len = 0; + u8 buf[256]; + int ret; + u8 mas; + + dprintk(DBGLVL_API, "%s(nr=%d type=%d val=%x)\n", __func__, + port->nr, port->type, val); + + if (port->nr == 0) + mas = 0xd0; + else + mas = 0xe0; + + memset(buf, 0, sizeof(buf)); + + buf[0x00] = 0x04; + buf[0x01] = 0x00; + buf[0x02] = 0x00; + buf[0x03] = 0x00; + + buf[0x04] = 0x04; + buf[0x05] = 0x00; + buf[0x06] = 0x00; + buf[0x07] = 0x00; + + buf[0x08] = reg; + buf[0x09] = 0x26; + buf[0x0a] = mas; + buf[0x0b] = 0xb0; + + buf[0x0c] = val; + buf[0x0d] = 0x00; + buf[0x0e] = 0x00; + buf[0x0f] = 0x00; + + ret = saa7164_cmd_send(dev, port->ifunit.unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + ret = saa7164_cmd_send(dev, port->ifunit.unitid, SET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); +#if 0 + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, buf, 16, + false); +#endif + return ret == SAA_OK ? 0 : -EIO; +} + +/* Disable the IF block AGC controls */ +int saa7164_api_configure_dif(struct saa7164_port *port, u32 std) +{ + struct saa7164_dev *dev = port->dev; + int ret = 0; + u8 agc_disable; + + dprintk(DBGLVL_API, "%s(nr=%d, 0x%x)\n", __func__, port->nr, std); + + if (std & V4L2_STD_NTSC) { + dprintk(DBGLVL_API, " NTSC\n"); + saa7164_api_set_dif(port, 0x00, 0x01); /* Video Standard */ + agc_disable = 0; + } else if (std & V4L2_STD_PAL_I) { + dprintk(DBGLVL_API, " PAL-I\n"); + saa7164_api_set_dif(port, 0x00, 0x08); /* Video Standard */ + agc_disable = 0; + } else if (std & V4L2_STD_PAL_M) { + dprintk(DBGLVL_API, " PAL-M\n"); + saa7164_api_set_dif(port, 0x00, 0x01); /* Video Standard */ + agc_disable = 0; + } else if (std & V4L2_STD_PAL_N) { + dprintk(DBGLVL_API, " PAL-N\n"); + saa7164_api_set_dif(port, 0x00, 0x01); /* Video Standard */ + agc_disable = 0; + } else if (std & V4L2_STD_PAL_Nc) { + dprintk(DBGLVL_API, " PAL-Nc\n"); + saa7164_api_set_dif(port, 0x00, 0x01); /* Video Standard */ + agc_disable = 0; + } else if (std & V4L2_STD_PAL_B) { + dprintk(DBGLVL_API, " PAL-B\n"); + saa7164_api_set_dif(port, 0x00, 0x02); /* Video Standard */ + agc_disable = 0; + } else if (std & V4L2_STD_PAL_DK) { + dprintk(DBGLVL_API, " PAL-DK\n"); + saa7164_api_set_dif(port, 0x00, 0x10); /* Video Standard */ + agc_disable = 0; + } else if (std & V4L2_STD_SECAM_L) { + dprintk(DBGLVL_API, " SECAM-L\n"); + saa7164_api_set_dif(port, 0x00, 0x20); /* Video Standard */ + agc_disable = 0; + } else { + /* Unknown standard, assume DTV */ + dprintk(DBGLVL_API, " Unknown (assuming DTV)\n"); + /* Undefinded Video Standard */ + saa7164_api_set_dif(port, 0x00, 0x80); + agc_disable = 1; + } + + saa7164_api_set_dif(port, 0x48, 0xa0); /* AGC Functions 1 */ + saa7164_api_set_dif(port, 0xc0, agc_disable); /* AGC Output Disable */ + saa7164_api_set_dif(port, 0x7c, 0x04); /* CVBS EQ */ + saa7164_api_set_dif(port, 0x04, 0x01); /* Active */ + msleep(100); + saa7164_api_set_dif(port, 0x04, 0x00); /* Active (again) */ + msleep(100); + + return ret; +} + +/* Ensure the dif is in the correct state for the operating mode + * (analog / dtv). We only configure the diff through the analog encoder + * so when we're in digital mode we need to find the appropriate encoder + * and use it to configure the DIF. + */ +int saa7164_api_initialize_dif(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_port *p = NULL; + int ret = -EINVAL; + u32 std = 0; + + dprintk(DBGLVL_API, "%s(nr=%d type=%d)\n", __func__, + port->nr, port->type); + + if (port->type == SAA7164_MPEG_ENCODER) { + /* Pick any analog standard to init the diff. + * we'll come back during encoder_init' + * and set the correct standard if requried. + */ + std = V4L2_STD_NTSC; + } else + if (port->type == SAA7164_MPEG_DVB) { + if (port->nr == SAA7164_PORT_TS1) + p = &dev->ports[SAA7164_PORT_ENC1]; + else + p = &dev->ports[SAA7164_PORT_ENC2]; + } else + if (port->type == SAA7164_MPEG_VBI) { + std = V4L2_STD_NTSC; + if (port->nr == SAA7164_PORT_VBI1) + p = &dev->ports[SAA7164_PORT_ENC1]; + else + p = &dev->ports[SAA7164_PORT_ENC2]; + } else + BUG(); + + if (p) + ret = saa7164_api_configure_dif(p, std); + + return ret; +} + +int saa7164_api_transition_port(struct saa7164_port *port, u8 mode) +{ + struct saa7164_dev *dev = port->dev; + + int ret; + + dprintk(DBGLVL_API, "%s(nr=%d unitid=0x%x,%d)\n", + __func__, port->nr, port->hwcfg.unitid, mode); + + ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR, + SAA_STATE_CONTROL, sizeof(mode), &mode); + if (ret != SAA_OK) + printk(KERN_ERR "%s(portnr %d unitid 0x%x) error, ret = 0x%x\n", + __func__, port->nr, port->hwcfg.unitid, ret); + + return ret; +} + +int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version) +{ + int ret; + + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_FW_VERSION_CONTROL, sizeof(u32), version); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen) +{ + u8 reg[] = { 0x0f, 0x00 }; + + if (buflen < 128) + return -ENOMEM; + + /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ + /* TODO: Pull the details from the boards struct */ + return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg), + ®[0], 128, buf); +} + +static int saa7164_api_configure_port_vbi(struct saa7164_dev *dev, + struct saa7164_port *port) +{ + struct tmComResVBIFormatDescrHeader *fmt = &port->vbi_fmt_ntsc; + + dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", fmt->bFormatIndex); + dprintk(DBGLVL_API, " VideoStandard = 0x%x\n", fmt->VideoStandard); + dprintk(DBGLVL_API, " StartLine = %d\n", fmt->StartLine); + dprintk(DBGLVL_API, " EndLine = %d\n", fmt->EndLine); + dprintk(DBGLVL_API, " FieldRate = %d\n", fmt->FieldRate); + dprintk(DBGLVL_API, " bNumLines = %d\n", fmt->bNumLines); + + /* Cache the hardware configuration in the port */ + + port->bufcounter = port->hwcfg.BARLocation; + port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); + port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); + port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); + port->bufptr32l = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); + port->bufptr32h = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + port->bufptr64 = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", + port->hwcfg.BARLocation); + + dprintk(DBGLVL_API, " = VS_FORMAT_VBI (becomes dev->en[%d])\n", + port->nr); + + return 0; +} + +static int +saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev, + struct saa7164_port *port, + struct tmComResTSFormatDescrHeader *tsfmt) +{ + dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", tsfmt->bFormatIndex); + dprintk(DBGLVL_API, " bDataOffset = 0x%x\n", tsfmt->bDataOffset); + dprintk(DBGLVL_API, " bPacketLength= 0x%x\n", tsfmt->bPacketLength); + dprintk(DBGLVL_API, " bStrideLength= 0x%x\n", tsfmt->bStrideLength); + dprintk(DBGLVL_API, " bguid = (....)\n"); + + /* Cache the hardware configuration in the port */ + + port->bufcounter = port->hwcfg.BARLocation; + port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); + port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); + port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); + port->bufptr32l = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); + port->bufptr32h = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + port->bufptr64 = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", + port->hwcfg.BARLocation); + + dprintk(DBGLVL_API, " = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n", + port->nr); + + return 0; +} + +static int +saa7164_api_configure_port_mpeg2ps(struct saa7164_dev *dev, + struct saa7164_port *port, + struct tmComResPSFormatDescrHeader *fmt) +{ + dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", fmt->bFormatIndex); + dprintk(DBGLVL_API, " wPacketLength= 0x%x\n", fmt->wPacketLength); + dprintk(DBGLVL_API, " wPackLength= 0x%x\n", fmt->wPackLength); + dprintk(DBGLVL_API, " bPackDataType= 0x%x\n", fmt->bPackDataType); + + /* Cache the hardware configuration in the port */ + /* TODO: CHECK THIS in the port config */ + port->bufcounter = port->hwcfg.BARLocation; + port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); + port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); + port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); + port->bufptr32l = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); + port->bufptr32h = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + port->bufptr64 = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", + port->hwcfg.BARLocation); + + dprintk(DBGLVL_API, " = VS_FORMAT_MPEGPS (becomes dev->enc[%d])\n", + port->nr); + + return 0; +} + +static int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len) +{ + struct saa7164_port *tsport = NULL; + struct saa7164_port *encport = NULL; + struct saa7164_port *vbiport = NULL; + u32 idx, next_offset; + int i; + struct tmComResDescrHeader *hdr, *t; + struct tmComResExtDevDescrHeader *exthdr; + struct tmComResPathDescrHeader *pathhdr; + struct tmComResAntTermDescrHeader *anttermhdr; + struct tmComResTunerDescrHeader *tunerunithdr; + struct tmComResDMATermDescrHeader *vcoutputtermhdr; + struct tmComResTSFormatDescrHeader *tsfmt; + struct tmComResPSFormatDescrHeader *psfmt; + struct tmComResSelDescrHeader *psel; + struct tmComResProcDescrHeader *pdh; + struct tmComResAFeatureDescrHeader *afd; + struct tmComResEncoderDescrHeader *edh; + struct tmComResVBIFormatDescrHeader *vbifmt; + u32 currpath = 0; + + dprintk(DBGLVL_API, + "%s(?,?,%d) sizeof(struct tmComResDescrHeader) = %d bytes\n", + __func__, len, (u32)sizeof(struct tmComResDescrHeader)); + + for (idx = 0; idx < (len - sizeof(struct tmComResDescrHeader));) { + + hdr = (struct tmComResDescrHeader *)(buf + idx); + + if (hdr->type != CS_INTERFACE) + return SAA_ERR_NOT_SUPPORTED; + + dprintk(DBGLVL_API, "@ 0x%x =\n", idx); + switch (hdr->subtype) { + case GENERAL_REQUEST: + dprintk(DBGLVL_API, " GENERAL_REQUEST\n"); + break; + case VC_TUNER_PATH: + dprintk(DBGLVL_API, " VC_TUNER_PATH\n"); + pathhdr = (struct tmComResPathDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " pathid = 0x%x\n", + pathhdr->pathid); + currpath = pathhdr->pathid; + break; + case VC_INPUT_TERMINAL: + dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n"); + anttermhdr = + (struct tmComResAntTermDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " terminalid = 0x%x\n", + anttermhdr->terminalid); + dprintk(DBGLVL_API, " terminaltype = 0x%x\n", + anttermhdr->terminaltype); + switch (anttermhdr->terminaltype) { + case ITT_ANTENNA: + dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); + break; + case LINE_CONNECTOR: + dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); + break; + case SPDIF_CONNECTOR: + dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); + break; + case COMPOSITE_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPOSITE_CONNECTOR\n"); + break; + case SVIDEO_CONNECTOR: + dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); + break; + case COMPONENT_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPONENT_CONNECTOR\n"); + break; + case STANDARD_DMA: + dprintk(DBGLVL_API, " = STANDARD_DMA\n"); + break; + default: + dprintk(DBGLVL_API, " = undefined (0x%x)\n", + anttermhdr->terminaltype); + } + dprintk(DBGLVL_API, " assocterminal= 0x%x\n", + anttermhdr->assocterminal); + dprintk(DBGLVL_API, " iterminal = 0x%x\n", + anttermhdr->iterminal); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + anttermhdr->controlsize); + break; + case VC_OUTPUT_TERMINAL: + dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n"); + vcoutputtermhdr = + (struct tmComResDMATermDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + vcoutputtermhdr->unitid); + dprintk(DBGLVL_API, " terminaltype = 0x%x\n", + vcoutputtermhdr->terminaltype); + switch (vcoutputtermhdr->terminaltype) { + case ITT_ANTENNA: + dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); + break; + case LINE_CONNECTOR: + dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); + break; + case SPDIF_CONNECTOR: + dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); + break; + case COMPOSITE_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPOSITE_CONNECTOR\n"); + break; + case SVIDEO_CONNECTOR: + dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); + break; + case COMPONENT_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPONENT_CONNECTOR\n"); + break; + case STANDARD_DMA: + dprintk(DBGLVL_API, " = STANDARD_DMA\n"); + break; + default: + dprintk(DBGLVL_API, " = undefined (0x%x)\n", + vcoutputtermhdr->terminaltype); + } + dprintk(DBGLVL_API, " assocterminal= 0x%x\n", + vcoutputtermhdr->assocterminal); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + vcoutputtermhdr->sourceid); + dprintk(DBGLVL_API, " iterminal = 0x%x\n", + vcoutputtermhdr->iterminal); + dprintk(DBGLVL_API, " BARLocation = 0x%x\n", + vcoutputtermhdr->BARLocation); + dprintk(DBGLVL_API, " flags = 0x%x\n", + vcoutputtermhdr->flags); + dprintk(DBGLVL_API, " interruptid = 0x%x\n", + vcoutputtermhdr->interruptid); + dprintk(DBGLVL_API, " buffercount = 0x%x\n", + vcoutputtermhdr->buffercount); + dprintk(DBGLVL_API, " metadatasize = 0x%x\n", + vcoutputtermhdr->metadatasize); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + vcoutputtermhdr->controlsize); + dprintk(DBGLVL_API, " numformats = 0x%x\n", + vcoutputtermhdr->numformats); + + t = (struct tmComResDescrHeader *) + ((struct tmComResDMATermDescrHeader *)(buf + idx)); + next_offset = idx + (vcoutputtermhdr->len); + for (i = 0; i < vcoutputtermhdr->numformats; i++) { + t = (struct tmComResDescrHeader *) + (buf + next_offset); + switch (t->subtype) { + case VS_FORMAT_MPEG2TS: + tsfmt = + (struct tmComResTSFormatDescrHeader *)t; + if (currpath == 1) + tsport = &dev->ports[SAA7164_PORT_TS1]; + else + tsport = &dev->ports[SAA7164_PORT_TS2]; + memcpy(&tsport->hwcfg, vcoutputtermhdr, + sizeof(*vcoutputtermhdr)); + saa7164_api_configure_port_mpeg2ts(dev, + tsport, tsfmt); + break; + case VS_FORMAT_MPEG2PS: + psfmt = + (struct tmComResPSFormatDescrHeader *)t; + if (currpath == 1) + encport = &dev->ports[SAA7164_PORT_ENC1]; + else + encport = &dev->ports[SAA7164_PORT_ENC2]; + memcpy(&encport->hwcfg, vcoutputtermhdr, + sizeof(*vcoutputtermhdr)); + saa7164_api_configure_port_mpeg2ps(dev, + encport, psfmt); + break; + case VS_FORMAT_VBI: + vbifmt = + (struct tmComResVBIFormatDescrHeader *)t; + if (currpath == 1) + vbiport = &dev->ports[SAA7164_PORT_VBI1]; + else + vbiport = &dev->ports[SAA7164_PORT_VBI2]; + memcpy(&vbiport->hwcfg, vcoutputtermhdr, + sizeof(*vcoutputtermhdr)); + memcpy(&vbiport->vbi_fmt_ntsc, vbifmt, + sizeof(*vbifmt)); + saa7164_api_configure_port_vbi(dev, + vbiport); + break; + case VS_FORMAT_RDS: + dprintk(DBGLVL_API, + " = VS_FORMAT_RDS\n"); + break; + case VS_FORMAT_UNCOMPRESSED: + dprintk(DBGLVL_API, + " = VS_FORMAT_UNCOMPRESSED\n"); + break; + case VS_FORMAT_TYPE: + dprintk(DBGLVL_API, + " = VS_FORMAT_TYPE\n"); + break; + default: + dprintk(DBGLVL_API, + " = undefined (0x%x)\n", + t->subtype); + } + next_offset += t->len; + } + + break; + case TUNER_UNIT: + dprintk(DBGLVL_API, " TUNER_UNIT\n"); + tunerunithdr = + (struct tmComResTunerDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + tunerunithdr->unitid); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + tunerunithdr->sourceid); + dprintk(DBGLVL_API, " iunit = 0x%x\n", + tunerunithdr->iunit); + dprintk(DBGLVL_API, " tuningstandards = 0x%x\n", + tunerunithdr->tuningstandards); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + tunerunithdr->controlsize); + dprintk(DBGLVL_API, " controls = 0x%x\n", + tunerunithdr->controls); + + if (tunerunithdr->unitid == tunerunithdr->iunit) { + if (currpath == 1) + encport = &dev->ports[SAA7164_PORT_ENC1]; + else + encport = &dev->ports[SAA7164_PORT_ENC2]; + memcpy(&encport->tunerunit, tunerunithdr, + sizeof(struct tmComResTunerDescrHeader)); + dprintk(DBGLVL_API, + " (becomes dev->enc[%d] tuner)\n", + encport->nr); + } + break; + case VC_SELECTOR_UNIT: + psel = (struct tmComResSelDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n"); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + psel->unitid); + dprintk(DBGLVL_API, " nrinpins = 0x%x\n", + psel->nrinpins); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + psel->sourceid); + break; + case VC_PROCESSING_UNIT: + pdh = (struct tmComResProcDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n"); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + pdh->unitid); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + pdh->sourceid); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + pdh->controlsize); + if (pdh->controlsize == 0x04) { + if (currpath == 1) + encport = &dev->ports[SAA7164_PORT_ENC1]; + else + encport = &dev->ports[SAA7164_PORT_ENC2]; + memcpy(&encport->vidproc, pdh, + sizeof(struct tmComResProcDescrHeader)); + dprintk(DBGLVL_API, " (becomes dev->enc[%d])\n", + encport->nr); + } + break; + case FEATURE_UNIT: + afd = (struct tmComResAFeatureDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " FEATURE_UNIT\n"); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + afd->unitid); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + afd->sourceid); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + afd->controlsize); + if (currpath == 1) + encport = &dev->ports[SAA7164_PORT_ENC1]; + else + encport = &dev->ports[SAA7164_PORT_ENC2]; + memcpy(&encport->audfeat, afd, + sizeof(struct tmComResAFeatureDescrHeader)); + dprintk(DBGLVL_API, " (becomes dev->enc[%d])\n", + encport->nr); + break; + case ENCODER_UNIT: + edh = (struct tmComResEncoderDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " ENCODER_UNIT\n"); + dprintk(DBGLVL_API, " subtype = 0x%x\n", edh->subtype); + dprintk(DBGLVL_API, " unitid = 0x%x\n", edh->unitid); + dprintk(DBGLVL_API, " vsourceid = 0x%x\n", + edh->vsourceid); + dprintk(DBGLVL_API, " asourceid = 0x%x\n", + edh->asourceid); + dprintk(DBGLVL_API, " iunit = 0x%x\n", edh->iunit); + if (edh->iunit == edh->unitid) { + if (currpath == 1) + encport = &dev->ports[SAA7164_PORT_ENC1]; + else + encport = &dev->ports[SAA7164_PORT_ENC2]; + memcpy(&encport->encunit, edh, + sizeof(struct tmComResEncoderDescrHeader)); + dprintk(DBGLVL_API, + " (becomes dev->enc[%d])\n", + encport->nr); + } + break; + case EXTENSION_UNIT: + dprintk(DBGLVL_API, " EXTENSION_UNIT\n"); + exthdr = (struct tmComResExtDevDescrHeader *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + exthdr->unitid); + dprintk(DBGLVL_API, " deviceid = 0x%x\n", + exthdr->deviceid); + dprintk(DBGLVL_API, " devicetype = 0x%x\n", + exthdr->devicetype); + if (exthdr->devicetype & 0x1) + dprintk(DBGLVL_API, " = Decoder Device\n"); + if (exthdr->devicetype & 0x2) + dprintk(DBGLVL_API, " = GPIO Source\n"); + if (exthdr->devicetype & 0x4) + dprintk(DBGLVL_API, " = Video Decoder\n"); + if (exthdr->devicetype & 0x8) + dprintk(DBGLVL_API, " = Audio Decoder\n"); + if (exthdr->devicetype & 0x20) + dprintk(DBGLVL_API, " = Crossbar\n"); + if (exthdr->devicetype & 0x40) + dprintk(DBGLVL_API, " = Tuner\n"); + if (exthdr->devicetype & 0x80) + dprintk(DBGLVL_API, " = IF PLL\n"); + if (exthdr->devicetype & 0x100) + dprintk(DBGLVL_API, " = Demodulator\n"); + if (exthdr->devicetype & 0x200) + dprintk(DBGLVL_API, " = RDS Decoder\n"); + if (exthdr->devicetype & 0x400) + dprintk(DBGLVL_API, " = Encoder\n"); + if (exthdr->devicetype & 0x800) + dprintk(DBGLVL_API, " = IR Decoder\n"); + if (exthdr->devicetype & 0x1000) + dprintk(DBGLVL_API, " = EEPROM\n"); + if (exthdr->devicetype & 0x2000) + dprintk(DBGLVL_API, + " = VBI Decoder\n"); + if (exthdr->devicetype & 0x10000) + dprintk(DBGLVL_API, + " = Streaming Device\n"); + if (exthdr->devicetype & 0x20000) + dprintk(DBGLVL_API, + " = DRM Device\n"); + if (exthdr->devicetype & 0x40000000) + dprintk(DBGLVL_API, + " = Generic Device\n"); + if (exthdr->devicetype & 0x80000000) + dprintk(DBGLVL_API, + " = Config Space Device\n"); + dprintk(DBGLVL_API, " numgpiopins = 0x%x\n", + exthdr->numgpiopins); + dprintk(DBGLVL_API, " numgpiogroups = 0x%x\n", + exthdr->numgpiogroups); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + exthdr->controlsize); + if (exthdr->devicetype & 0x80) { + if (currpath == 1) + encport = &dev->ports[SAA7164_PORT_ENC1]; + else + encport = &dev->ports[SAA7164_PORT_ENC2]; + memcpy(&encport->ifunit, exthdr, + sizeof(struct tmComResExtDevDescrHeader)); + dprintk(DBGLVL_API, + " (becomes dev->enc[%d])\n", + encport->nr); + } + break; + case PVC_INFRARED_UNIT: + dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n"); + break; + case DRM_UNIT: + dprintk(DBGLVL_API, " DRM_UNIT\n"); + break; + default: + dprintk(DBGLVL_API, "default %d\n", hdr->subtype); + } + + dprintk(DBGLVL_API, " 1.%x\n", hdr->len); + dprintk(DBGLVL_API, " 2.%x\n", hdr->type); + dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype); + dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid); + + idx += hdr->len; + } + + return 0; +} + +int saa7164_api_enum_subdevs(struct saa7164_dev *dev) +{ + int ret; + u32 buflen = 0; + u8 *buf; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + /* Get the total descriptor length */ + ret = saa7164_cmd_send(dev, 0, GET_LEN, + GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n", + __func__, buflen); + + /* Allocate enough storage for all of the descs */ + buf = kzalloc(buflen, GFP_KERNEL); + if (!buf) + return SAA_ERR_NO_RESOURCES; + + /* Retrieve them */ + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_DESCRIPTORS_CONTROL, buflen, buf); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + goto out; + } + + if (saa_debug & DBGLVL_API) + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, buf, + buflen & ~15, false); + + saa7164_api_dump_subdevs(dev, buf, buflen); + +out: + kfree(buf); + return ret; +} + +int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, + u32 datalen, u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if (reglen > 4) + return -EIO; + + /* Prepare the send buffer */ + /* Bytes 00-03 source register length + * 04-07 source bytes to read + * 08... register address + */ + memset(buf, 0, sizeof(buf)); + memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen); + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen; + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); + return -EIO; + } + + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + if (saa_debug & DBGLVL_I2C) + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, buf, + 32, false); + + ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + else { + if (saa_debug & DBGLVL_I2C) + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, + buf, sizeof(buf), false); + memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen); + } + + return ret == SAA_OK ? 0 : -EIO; +} + +/* For a given 8 bit i2c address device, write the buffer */ +int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen, + u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + int reglen; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if ((datalen == 0) || (datalen > 232)) + return -EIO; + + memset(buf, 0, sizeof(buf)); + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); + return -EIO; + } + + reglen = saa7164_i2caddr_to_reglen(bus, addr); + if (reglen < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr to reglen\n", + __func__); + return -EIO; + } + + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + /* Prepare the send buffer */ + /* Bytes 00-03 dest register length + * 04-07 dest bytes to write + * 08... register address + */ + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen; + memcpy((buf + 2 * sizeof(u32)), data, datalen); + + if (saa_debug & DBGLVL_I2C) + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, + buf, sizeof(buf), false); + + ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + + return ret == SAA_OK ? 0 : -EIO; +} + +static int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid, + u8 pin, u8 state) +{ + int ret; + struct tmComResGPIO t; + + dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n", + __func__, unitid, pin, state); + + if ((pin > 7) || (state > 2)) + return SAA_ERR_BAD_PARAMETER; + + t.pin = pin; + t.state = state; + + ret = saa7164_cmd_send(dev, unitid, SET_CUR, + EXU_GPIO_CONTROL, sizeof(t), &t); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", + __func__, ret); + + return ret; +} + +int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, + u8 pin) +{ + return saa7164_api_modify_gpio(dev, unitid, pin, 1); +} + +int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, + u8 pin) +{ + return saa7164_api_modify_gpio(dev, unitid, pin, 0); +} + diff --git a/drivers/media/pci/saa7164/saa7164-buffer.c b/drivers/media/pci/saa7164/saa7164-buffer.c new file mode 100644 index 00000000..66696fa8 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-buffer.c @@ -0,0 +1,322 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include "saa7164.h" + +/* The PCI address space for buffer handling looks like this: + * + * +-u32 wide-------------+ + * | + + * +-u64 wide------------------------------------+ + * + + + * +----------------------+ + * | CurrentBufferPtr + Pointer to current PCI buffer >-+ + * +----------------------+ | + * | Unused + | + * +----------------------+ | + * | Pitch + = 188 (bytes) | + * +----------------------+ | + * | PCI buffer size + = pitch * number of lines (312) | + * +----------------------+ | + * |0| Buf0 Write Offset + | + * +----------------------+ v + * |1| Buf1 Write Offset + | + * +----------------------+ | + * |2| Buf2 Write Offset + | + * +----------------------+ | + * |3| Buf3 Write Offset + | + * +----------------------+ | + * ... More write offsets | + * +---------------------------------------------+ | + * +0| set of ptrs to PCI pagetables + | + * +---------------------------------------------+ | + * +1| set of ptrs to PCI pagetables + <--------+ + * +---------------------------------------------+ + * +2| set of ptrs to PCI pagetables + + * +---------------------------------------------+ + * +3| set of ptrs to PCI pagetables + >--+ + * +---------------------------------------------+ | + * ... More buffer pointers | +----------------+ + * +->| pt[0] TS data | + * | +----------------+ + * | + * | +----------------+ + * +->| pt[1] TS data | + * | +----------------+ + * | etc + */ + +void saa7164_buffer_display(struct saa7164_buffer *buf) +{ + struct saa7164_dev *dev = buf->port->dev; + int i; + + dprintk(DBGLVL_BUF, "%s() buffer @ 0x%p nr=%d\n", + __func__, buf, buf->idx); + dprintk(DBGLVL_BUF, " pci_cpu @ 0x%p dma @ 0x%08llx len = 0x%x\n", + buf->cpu, (long long)buf->dma, buf->pci_size); + dprintk(DBGLVL_BUF, " pt_cpu @ 0x%p pt_dma @ 0x%08llx len = 0x%x\n", + buf->pt_cpu, (long long)buf->pt_dma, buf->pt_size); + + /* Format the Page Table Entries to point into the data buffer */ + for (i = 0 ; i < SAA7164_PT_ENTRIES; i++) { + + dprintk(DBGLVL_BUF, " pt[%02d] = 0x%p -> 0x%llx\n", + i, buf->pt_cpu, (u64)*(buf->pt_cpu)); + + } +} +/* Allocate a new buffer structure and associated PCI space in bytes. + * len must be a multiple of sizeof(u64) + */ +struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_port *port, + u32 len) +{ + struct tmHWStreamParameters *params = &port->hw_streamingparams; + struct saa7164_buffer *buf = NULL; + struct saa7164_dev *dev = port->dev; + int i; + + if ((len == 0) || (len >= 65536) || (len % sizeof(u64))) { + log_warn("%s() SAA_ERR_BAD_PARAMETER\n", __func__); + goto ret; + } + + buf = kzalloc(sizeof(struct saa7164_buffer), GFP_KERNEL); + if (!buf) { + log_warn("%s() SAA_ERR_NO_RESOURCES\n", __func__); + goto ret; + } + + buf->idx = -1; + buf->port = port; + buf->flags = SAA7164_BUFFER_FREE; + buf->pos = 0; + buf->actual_size = params->pitch * params->numberoflines; + buf->crc = 0; + /* TODO: arg len is being ignored */ + buf->pci_size = SAA7164_PT_ENTRIES * 0x1000; + buf->pt_size = (SAA7164_PT_ENTRIES * sizeof(u64)) + 0x1000; + + /* Allocate contiguous memory */ + buf->cpu = pci_alloc_consistent(port->dev->pci, buf->pci_size, + &buf->dma); + if (!buf->cpu) + goto fail1; + + buf->pt_cpu = pci_alloc_consistent(port->dev->pci, buf->pt_size, + &buf->pt_dma); + if (!buf->pt_cpu) + goto fail2; + + /* init the buffers to a known pattern, easier during debugging */ + memset_io(buf->cpu, 0xff, buf->pci_size); + buf->crc = crc32(0, buf->cpu, buf->actual_size); + memset_io(buf->pt_cpu, 0xff, buf->pt_size); + + dprintk(DBGLVL_BUF, "%s() allocated buffer @ 0x%p (%d pageptrs)\n", + __func__, buf, params->numpagetables); + dprintk(DBGLVL_BUF, " pci_cpu @ 0x%p dma @ 0x%08lx len = 0x%x\n", + buf->cpu, (long)buf->dma, buf->pci_size); + dprintk(DBGLVL_BUF, " pt_cpu @ 0x%p pt_dma @ 0x%08lx len = 0x%x\n", + buf->pt_cpu, (long)buf->pt_dma, buf->pt_size); + + /* Format the Page Table Entries to point into the data buffer */ + for (i = 0 ; i < params->numpagetables; i++) { + + *(buf->pt_cpu + i) = buf->dma + (i * 0x1000); /* TODO */ + dprintk(DBGLVL_BUF, " pt[%02d] = 0x%p -> 0x%llx\n", + i, buf->pt_cpu, (u64)*(buf->pt_cpu)); + + } + + goto ret; + +fail2: + pci_free_consistent(port->dev->pci, buf->pci_size, buf->cpu, buf->dma); +fail1: + kfree(buf); + + buf = NULL; +ret: + return buf; +} + +int saa7164_buffer_dealloc(struct saa7164_buffer *buf) +{ + struct saa7164_dev *dev; + + if (!buf || !buf->port) + return SAA_ERR_BAD_PARAMETER; + dev = buf->port->dev; + + dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", + __func__, buf); + + if (buf->flags != SAA7164_BUFFER_FREE) + log_warn(" freeing a non-free buffer\n"); + + pci_free_consistent(dev->pci, buf->pci_size, buf->cpu, buf->dma); + pci_free_consistent(dev->pci, buf->pt_size, buf->pt_cpu, buf->pt_dma); + + kfree(buf); + + return SAA_OK; +} + +int saa7164_buffer_zero_offsets(struct saa7164_port *port, int i) +{ + struct saa7164_dev *dev = port->dev; + + if ((i < 0) || (i >= port->hwcfg.buffercount)) + return -EINVAL; + + dprintk(DBGLVL_BUF, "%s(idx = %d)\n", __func__, i); + + saa7164_writel(port->bufoffset + (sizeof(u32) * i), 0); + + return 0; +} + +/* Write a buffer into the hardware */ +int saa7164_buffer_activate(struct saa7164_buffer *buf, int i) +{ + struct saa7164_port *port = buf->port; + struct saa7164_dev *dev = port->dev; + + if ((i < 0) || (i >= port->hwcfg.buffercount)) + return -EINVAL; + + dprintk(DBGLVL_BUF, "%s(idx = %d)\n", __func__, i); + + buf->idx = i; /* Note of which buffer list index position we occupy */ + buf->flags = SAA7164_BUFFER_BUSY; + buf->pos = 0; + + /* TODO: Review this in light of 32v64 assignments */ + saa7164_writel(port->bufoffset + (sizeof(u32) * i), 0); + saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i), buf->pt_dma); + saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0); + + dprintk(DBGLVL_BUF, " buf[%d] offset 0x%llx (0x%x) " + "buf 0x%llx/%llx (0x%x/%x) nr=%d\n", + buf->idx, + (u64)port->bufoffset + (i * sizeof(u32)), + saa7164_readl(port->bufoffset + (sizeof(u32) * i)), + (u64)port->bufptr32h + ((sizeof(u32) * 2) * i), + (u64)port->bufptr32l + ((sizeof(u32) * 2) * i), + saa7164_readl(port->bufptr32h + ((sizeof(u32) * i) * 2)), + saa7164_readl(port->bufptr32l + ((sizeof(u32) * i) * 2)), + buf->idx); + + return 0; +} + +int saa7164_buffer_cfg_port(struct saa7164_port *port) +{ + struct tmHWStreamParameters *params = &port->hw_streamingparams; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct list_head *c, *n; + int i = 0; + + dprintk(DBGLVL_BUF, "%s(port=%d)\n", __func__, port->nr); + + saa7164_writel(port->bufcounter, 0); + saa7164_writel(port->pitch, params->pitch); + saa7164_writel(port->bufsize, params->pitch * params->numberoflines); + + dprintk(DBGLVL_BUF, " configured:\n"); + dprintk(DBGLVL_BUF, " lmmio 0x%p\n", dev->lmmio); + dprintk(DBGLVL_BUF, " bufcounter 0x%x = 0x%x\n", port->bufcounter, + saa7164_readl(port->bufcounter)); + + dprintk(DBGLVL_BUF, " pitch 0x%x = %d\n", port->pitch, + saa7164_readl(port->pitch)); + + dprintk(DBGLVL_BUF, " bufsize 0x%x = %d\n", port->bufsize, + saa7164_readl(port->bufsize)); + + dprintk(DBGLVL_BUF, " buffercount = %d\n", port->hwcfg.buffercount); + dprintk(DBGLVL_BUF, " bufoffset = 0x%x\n", port->bufoffset); + dprintk(DBGLVL_BUF, " bufptr32h = 0x%x\n", port->bufptr32h); + dprintk(DBGLVL_BUF, " bufptr32l = 0x%x\n", port->bufptr32l); + + /* Poke the buffers and offsets into PCI space */ + mutex_lock(&port->dmaqueue_lock); + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + + if (buf->flags != SAA7164_BUFFER_FREE) + BUG(); + + /* Place the buffer in the h/w queue */ + saa7164_buffer_activate(buf, i); + + /* Don't exceed the device maximum # bufs */ + if (i++ > port->hwcfg.buffercount) + BUG(); + + } + mutex_unlock(&port->dmaqueue_lock); + + return 0; +} + +struct saa7164_user_buffer *saa7164_buffer_alloc_user(struct saa7164_dev *dev, + u32 len) +{ + struct saa7164_user_buffer *buf; + + buf = kzalloc(sizeof(struct saa7164_user_buffer), GFP_KERNEL); + if (!buf) + return NULL; + + buf->data = kzalloc(len, GFP_KERNEL); + + if (!buf->data) { + kfree(buf); + return NULL; + } + + buf->actual_size = len; + buf->pos = 0; + buf->crc = 0; + + dprintk(DBGLVL_BUF, "%s() allocated user buffer @ 0x%p\n", + __func__, buf); + + return buf; +} + +void saa7164_buffer_dealloc_user(struct saa7164_user_buffer *buf) +{ + if (!buf) + return; + + kfree(buf->data); + buf->data = NULL; + + kfree(buf); +} + diff --git a/drivers/media/pci/saa7164/saa7164-bus.c b/drivers/media/pci/saa7164/saa7164-bus.c new file mode 100644 index 00000000..5f6f3094 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-bus.c @@ -0,0 +1,475 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +/* The message bus to/from the firmware is a ring buffer in PCI address + * space. Establish the defaults. + */ +int saa7164_bus_setup(struct saa7164_dev *dev) +{ + struct tmComResBusInfo *b = &dev->bus; + + mutex_init(&b->lock); + + b->Type = TYPE_BUS_PCIe; + b->m_wMaxReqSize = SAA_DEVICE_MAXREQUESTSIZE; + + b->m_pdwSetRing = (u8 *)(dev->bmmio + + ((u32)dev->busdesc.CommandRing)); + + b->m_dwSizeSetRing = SAA_DEVICE_BUFFERBLOCKSIZE; + + b->m_pdwGetRing = (u8 *)(dev->bmmio + + ((u32)dev->busdesc.ResponseRing)); + + b->m_dwSizeGetRing = SAA_DEVICE_BUFFERBLOCKSIZE; + + b->m_dwSetWritePos = ((u32)dev->intfdesc.BARLocation) + + (2 * sizeof(u64)); + b->m_dwSetReadPos = b->m_dwSetWritePos + (1 * sizeof(u32)); + + b->m_dwGetWritePos = b->m_dwSetWritePos + (2 * sizeof(u32)); + b->m_dwGetReadPos = b->m_dwSetWritePos + (3 * sizeof(u32)); + + return 0; +} + +void saa7164_bus_dump(struct saa7164_dev *dev) +{ + struct tmComResBusInfo *b = &dev->bus; + + dprintk(DBGLVL_BUS, "Dumping the bus structure:\n"); + dprintk(DBGLVL_BUS, " .type = %d\n", b->Type); + dprintk(DBGLVL_BUS, " .dev->bmmio = 0x%p\n", dev->bmmio); + dprintk(DBGLVL_BUS, " .m_wMaxReqSize = 0x%x\n", b->m_wMaxReqSize); + dprintk(DBGLVL_BUS, " .m_pdwSetRing = 0x%p\n", b->m_pdwSetRing); + dprintk(DBGLVL_BUS, " .m_dwSizeSetRing = 0x%x\n", b->m_dwSizeSetRing); + dprintk(DBGLVL_BUS, " .m_pdwGetRing = 0x%p\n", b->m_pdwGetRing); + dprintk(DBGLVL_BUS, " .m_dwSizeGetRing = 0x%x\n", b->m_dwSizeGetRing); + + dprintk(DBGLVL_BUS, " .m_dwSetReadPos = 0x%x (0x%08x)\n", + b->m_dwSetReadPos, saa7164_readl(b->m_dwSetReadPos)); + + dprintk(DBGLVL_BUS, " .m_dwSetWritePos = 0x%x (0x%08x)\n", + b->m_dwSetWritePos, saa7164_readl(b->m_dwSetWritePos)); + + dprintk(DBGLVL_BUS, " .m_dwGetReadPos = 0x%x (0x%08x)\n", + b->m_dwGetReadPos, saa7164_readl(b->m_dwGetReadPos)); + + dprintk(DBGLVL_BUS, " .m_dwGetWritePos = 0x%x (0x%08x)\n", + b->m_dwGetWritePos, saa7164_readl(b->m_dwGetWritePos)); + +} + +/* Intensionally throw a BUG() if the state of the message bus looks corrupt */ +static void saa7164_bus_verify(struct saa7164_dev *dev) +{ + struct tmComResBusInfo *b = &dev->bus; + int bug = 0; + + if (saa7164_readl(b->m_dwSetReadPos) > b->m_dwSizeSetRing) + bug++; + + if (saa7164_readl(b->m_dwSetWritePos) > b->m_dwSizeSetRing) + bug++; + + if (saa7164_readl(b->m_dwGetReadPos) > b->m_dwSizeGetRing) + bug++; + + if (saa7164_readl(b->m_dwGetWritePos) > b->m_dwSizeGetRing) + bug++; + + if (bug) { + saa_debug = 0xffff; /* Ensure we get the bus dump */ + saa7164_bus_dump(dev); + saa_debug = 1024; /* Ensure we get the bus dump */ + BUG(); + } +} + +static void saa7164_bus_dumpmsg(struct saa7164_dev *dev, struct tmComResInfo *m, + void *buf) +{ + dprintk(DBGLVL_BUS, "Dumping msg structure:\n"); + dprintk(DBGLVL_BUS, " .id = %d\n", m->id); + dprintk(DBGLVL_BUS, " .flags = 0x%x\n", m->flags); + dprintk(DBGLVL_BUS, " .size = 0x%x\n", m->size); + dprintk(DBGLVL_BUS, " .command = 0x%x\n", m->command); + dprintk(DBGLVL_BUS, " .controlselector = 0x%x\n", m->controlselector); + dprintk(DBGLVL_BUS, " .seqno = %d\n", m->seqno); + if (buf) + dprintk(DBGLVL_BUS, " .buffer (ignored)\n"); +} + +/* + * Places a command or a response on the bus. The implementation does not + * know if it is a command or a response it just places the data on the + * bus depending on the bus information given in the struct tmComResBusInfo + * structure. If the command or response does not fit into the bus ring + * buffer it will be refused. + * + * Return Value: + * SAA_OK The function executed successfully. + * < 0 One or more members are not initialized. + */ +int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg, + void *buf) +{ + struct tmComResBusInfo *bus = &dev->bus; + u32 bytes_to_write, free_write_space, timeout, curr_srp, curr_swp; + u32 new_swp, space_rem; + int ret = SAA_ERR_BAD_PARAMETER; + + if (!msg) { + printk(KERN_ERR "%s() !msg\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + dprintk(DBGLVL_BUS, "%s()\n", __func__); + + saa7164_bus_verify(dev); + + msg->size = cpu_to_le16(msg->size); + msg->command = cpu_to_le32(msg->command); + msg->controlselector = cpu_to_le16(msg->controlselector); + + if (msg->size > dev->bus.m_wMaxReqSize) { + printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n", + __func__); + return SAA_ERR_BAD_PARAMETER; + } + + if ((msg->size > 0) && (buf == NULL)) { + printk(KERN_ERR "%s() Missing message buffer\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + /* Lock the bus from any other access */ + mutex_lock(&bus->lock); + + bytes_to_write = sizeof(*msg) + msg->size; + free_write_space = 0; + timeout = SAA_BUS_TIMEOUT; + curr_srp = le32_to_cpu(saa7164_readl(bus->m_dwSetReadPos)); + curr_swp = le32_to_cpu(saa7164_readl(bus->m_dwSetWritePos)); + + /* Deal with ring wrapping issues */ + if (curr_srp > curr_swp) + /* Deal with the wrapped ring */ + free_write_space = curr_srp - curr_swp; + else + /* The ring has not wrapped yet */ + free_write_space = (curr_srp + bus->m_dwSizeSetRing) - curr_swp; + + dprintk(DBGLVL_BUS, "%s() bytes_to_write = %d\n", __func__, + bytes_to_write); + + dprintk(DBGLVL_BUS, "%s() free_write_space = %d\n", __func__, + free_write_space); + + dprintk(DBGLVL_BUS, "%s() curr_srp = %x\n", __func__, curr_srp); + dprintk(DBGLVL_BUS, "%s() curr_swp = %x\n", __func__, curr_swp); + + /* Process the msg and write the content onto the bus */ + while (bytes_to_write >= free_write_space) { + + if (timeout-- == 0) { + printk(KERN_ERR "%s() bus timeout\n", __func__); + ret = SAA_ERR_NO_RESOURCES; + goto out; + } + + /* TODO: Review this delay, efficient? */ + /* Wait, allowing the hardware fetch time */ + mdelay(1); + + /* Check the space usage again */ + curr_srp = le32_to_cpu(saa7164_readl(bus->m_dwSetReadPos)); + + /* Deal with ring wrapping issues */ + if (curr_srp > curr_swp) + /* Deal with the wrapped ring */ + free_write_space = curr_srp - curr_swp; + else + /* Read didn't wrap around the buffer */ + free_write_space = (curr_srp + bus->m_dwSizeSetRing) - + curr_swp; + + } + + /* Calculate the new write position */ + new_swp = curr_swp + bytes_to_write; + + dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp); + dprintk(DBGLVL_BUS, "%s() bus->m_dwSizeSetRing = %x\n", __func__, + bus->m_dwSizeSetRing); + + /* Mental Note: line 462 tmmhComResBusPCIe.cpp */ + + /* Check if we're going to wrap again */ + if (new_swp > bus->m_dwSizeSetRing) { + + /* Ring wraps */ + new_swp -= bus->m_dwSizeSetRing; + + space_rem = bus->m_dwSizeSetRing - curr_swp; + + dprintk(DBGLVL_BUS, "%s() space_rem = %x\n", __func__, + space_rem); + + dprintk(DBGLVL_BUS, "%s() sizeof(*msg) = %d\n", __func__, + (u32)sizeof(*msg)); + + if (space_rem < sizeof(*msg)) { + dprintk(DBGLVL_BUS, "%s() tr4\n", __func__); + + /* Split the msg into pieces as the ring wraps */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, space_rem); + memcpy(bus->m_pdwSetRing, (u8 *)msg + space_rem, + sizeof(*msg) - space_rem); + + memcpy(bus->m_pdwSetRing + sizeof(*msg) - space_rem, + buf, msg->size); + + } else if (space_rem == sizeof(*msg)) { + dprintk(DBGLVL_BUS, "%s() tr5\n", __func__); + + /* Additional data at the beginning of the ring */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + memcpy(bus->m_pdwSetRing, buf, msg->size); + + } else { + /* Additional data wraps around the ring */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + if (msg->size > 0) { + memcpy(bus->m_pdwSetRing + curr_swp + + sizeof(*msg), buf, space_rem - + sizeof(*msg)); + memcpy(bus->m_pdwSetRing, (u8 *)buf + + space_rem - sizeof(*msg), + bytes_to_write - space_rem); + } + + } + + } /* (new_swp > bus->m_dwSizeSetRing) */ + else { + dprintk(DBGLVL_BUS, "%s() tr6\n", __func__); + + /* The ring buffer doesn't wrap, two simple copies */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + memcpy(bus->m_pdwSetRing + curr_swp + sizeof(*msg), buf, + msg->size); + } + + dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp); + + /* Update the bus write position */ + saa7164_writel(bus->m_dwSetWritePos, cpu_to_le32(new_swp)); + ret = SAA_OK; + +out: + saa7164_bus_dump(dev); + mutex_unlock(&bus->lock); + saa7164_bus_verify(dev); + return ret; +} + +/* + * Receive a command or a response from the bus. The implementation does not + * know if it is a command or a response it simply dequeues the data, + * depending on the bus information given in the struct tmComResBusInfo + * structure. + * + * Return Value: + * 0 The function executed successfully. + * < 0 One or more members are not initialized. + */ +int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg, + void *buf, int peekonly) +{ + struct tmComResBusInfo *bus = &dev->bus; + u32 bytes_to_read, write_distance, curr_grp, curr_gwp, + new_grp, buf_size, space_rem; + struct tmComResInfo msg_tmp; + int ret = SAA_ERR_BAD_PARAMETER; + + saa7164_bus_verify(dev); + + if (msg == NULL) + return ret; + + if (msg->size > dev->bus.m_wMaxReqSize) { + printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n", + __func__); + return ret; + } + + if ((peekonly == 0) && (msg->size > 0) && (buf == NULL)) { + printk(KERN_ERR + "%s() Missing msg buf, size should be %d bytes\n", + __func__, msg->size); + return ret; + } + + mutex_lock(&bus->lock); + + /* Peek the bus to see if a msg exists, if it's not what we're expecting + * then return cleanly else read the message from the bus. + */ + curr_gwp = le32_to_cpu(saa7164_readl(bus->m_dwGetWritePos)); + curr_grp = le32_to_cpu(saa7164_readl(bus->m_dwGetReadPos)); + + if (curr_gwp == curr_grp) { + ret = SAA_ERR_EMPTY; + goto out; + } + + bytes_to_read = sizeof(*msg); + + /* Calculate write distance to current read position */ + write_distance = 0; + if (curr_gwp >= curr_grp) + /* Write doesn't wrap around the ring */ + write_distance = curr_gwp - curr_grp; + else + /* Write wraps around the ring */ + write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp; + + if (bytes_to_read > write_distance) { + printk(KERN_ERR "%s() No message/response found\n", __func__); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Calculate the new read position */ + new_grp = curr_grp + bytes_to_read; + if (new_grp > bus->m_dwSizeGetRing) { + + /* Ring wraps */ + new_grp -= bus->m_dwSizeGetRing; + space_rem = bus->m_dwSizeGetRing - curr_grp; + + memcpy(&msg_tmp, bus->m_pdwGetRing + curr_grp, space_rem); + memcpy((u8 *)&msg_tmp + space_rem, bus->m_pdwGetRing, + bytes_to_read - space_rem); + + } else { + /* No wrapping */ + memcpy(&msg_tmp, bus->m_pdwGetRing + curr_grp, bytes_to_read); + } + + /* No need to update the read positions, because this was a peek */ + /* If the caller specifically want to peek, return */ + if (peekonly) { + memcpy(msg, &msg_tmp, sizeof(*msg)); + goto peekout; + } + + /* Check if the command/response matches what is expected */ + if ((msg_tmp.id != msg->id) || (msg_tmp.command != msg->command) || + (msg_tmp.controlselector != msg->controlselector) || + (msg_tmp.seqno != msg->seqno) || (msg_tmp.size != msg->size)) { + + printk(KERN_ERR "%s() Unexpected msg miss-match\n", __func__); + saa7164_bus_dumpmsg(dev, msg, buf); + saa7164_bus_dumpmsg(dev, &msg_tmp, NULL); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Get the actual command and response from the bus */ + buf_size = msg->size; + + bytes_to_read = sizeof(*msg) + msg->size; + /* Calculate write distance to current read position */ + write_distance = 0; + if (curr_gwp >= curr_grp) + /* Write doesn't wrap around the ring */ + write_distance = curr_gwp - curr_grp; + else + /* Write wraps around the ring */ + write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp; + + if (bytes_to_read > write_distance) { + printk(KERN_ERR "%s() Invalid bus state, missing msg " + "or mangled ring, faulty H/W / bad code?\n", __func__); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Calculate the new read position */ + new_grp = curr_grp + bytes_to_read; + if (new_grp > bus->m_dwSizeGetRing) { + + /* Ring wraps */ + new_grp -= bus->m_dwSizeGetRing; + space_rem = bus->m_dwSizeGetRing - curr_grp; + + if (space_rem < sizeof(*msg)) { + /* msg wraps around the ring */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, space_rem); + memcpy((u8 *)msg + space_rem, bus->m_pdwGetRing, + sizeof(*msg) - space_rem); + if (buf) + memcpy(buf, bus->m_pdwGetRing + sizeof(*msg) - + space_rem, buf_size); + + } else if (space_rem == sizeof(*msg)) { + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) + memcpy(buf, bus->m_pdwGetRing, buf_size); + } else { + /* Additional data wraps around the ring */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) { + memcpy(buf, bus->m_pdwGetRing + curr_grp + + sizeof(*msg), space_rem - sizeof(*msg)); + memcpy(buf + space_rem - sizeof(*msg), + bus->m_pdwGetRing, bytes_to_read - + space_rem); + } + + } + + } else { + /* No wrapping */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) + memcpy(buf, bus->m_pdwGetRing + curr_grp + sizeof(*msg), + buf_size); + } + + /* Update the read positions, adjusting the ring */ + saa7164_writel(bus->m_dwGetReadPos, cpu_to_le32(new_grp)); + +peekout: + msg->size = le16_to_cpu(msg->size); + msg->command = le32_to_cpu(msg->command); + msg->controlselector = le16_to_cpu(msg->controlselector); + ret = SAA_OK; +out: + mutex_unlock(&bus->lock); + saa7164_bus_verify(dev); + return ret; +} + diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c new file mode 100644 index 00000000..5b72da5c --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-cards.c @@ -0,0 +1,773 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "saa7164.h" + +/* The Bridge API needs to understand register widths (in bytes) for the + * attached I2C devices, so we can simplify the virtual i2c mechansms + * and keep the -i2c.c implementation clean. + */ +#define REGLEN_8bit 1 +#define REGLEN_16bit 2 + +struct saa7164_board saa7164_boards[] = { + [SAA7164_BOARD_UNKNOWN] = { + /* Bridge will not load any firmware, without knowing + * the rev this would be fatal. */ + .name = "Unknown", + }, + [SAA7164_BOARD_UNKNOWN_REV2] = { + /* Bridge will load the v2 f/w and dump descriptors */ + /* Required during new board bringup */ + .name = "Generic Rev2", + .chiprev = SAA7164_CHIP_REV2, + }, + [SAA7164_BOARD_UNKNOWN_REV3] = { + /* Bridge will load the v2 f/w and dump descriptors */ + /* Required during new board bringup */ + .name = "Generic Rev3", + .chiprev = SAA7164_CHIP_REV3, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV2, + .unit = {{ + .id = 0x06, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV2, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x22, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x20, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x23, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x28, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x26, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x29, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x26, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x22, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x27, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x23, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x21, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x22, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x25, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, +}; +const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards); + +/* ------------------------------------------------------------------ */ +/* PCI subsystem IDs */ + +struct saa7164_subid saa7164_subids[] = { + { + .subvendor = 0x0070, + .subdevice = 0x8880, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250, + }, { + .subvendor = 0x0070, + .subdevice = 0x8810, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250, + }, { + .subvendor = 0x0070, + .subdevice = 0x8980, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200, + }, { + .subvendor = 0x0070, + .subdevice = 0x8900, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8901, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_3, + }, { + .subvendor = 0x0070, + .subdevice = 0x88A1, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_3, + }, { + .subvendor = 0x0070, + .subdevice = 0x8891, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8851, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8940, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4, + }, { + .subvendor = 0x0070, + .subdevice = 0x8953, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_5, + }, +}; +const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); + +void saa7164_card_list(struct saa7164_dev *dev) +{ + int i; + + if (0 == dev->pci->subsystem_vendor && + 0 == dev->pci->subsystem_device) { + printk(KERN_ERR + "%s: Board has no valid PCIe Subsystem ID and can't\n" + "%s: be autodetected. Pass card= insmod option to\n" + "%s: workaround that. Send complaints to the vendor\n" + "%s: of the TV card. Best regards,\n" + "%s: -- tux\n", + dev->name, dev->name, dev->name, dev->name, dev->name); + } else { + printk(KERN_ERR + "%s: Your board isn't known (yet) to the driver.\n" + "%s: Try to pick one of the existing card configs via\n" + "%s: card= insmod option. Updating to the latest\n" + "%s: version might help as well.\n", + dev->name, dev->name, dev->name, dev->name); + } + + printk(KERN_ERR "%s: Here are valid choices for the card= insmod " + "option:\n", dev->name); + + for (i = 0; i < saa7164_bcount; i++) + printk(KERN_ERR "%s: card=%d -> %s\n", + dev->name, i, saa7164_boards[i].name); +} + +/* TODO: clean this define up into the -cards.c structs */ +#define PCIEBRIDGE_UNITID 2 + +void saa7164_gpio_setup(struct saa7164_dev *dev) +{ + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_5: + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: + /* + GPIO 2: s5h1411 / tda10048-1 demod reset + GPIO 3: s5h1411 / tda10048-2 demod reset + GPIO 7: IRBlaster Zilog reset + */ + + /* Reset parts by going in and out of reset */ + saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2); + saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3); + + msleep(20); + + saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2); + saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3); + break; + } +} + +static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data) +{ + struct tveeprom tv; + + /* TODO: Assumption: eeprom on bus 0 */ + tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, + eeprom_data); + + /* Make sure we support the board model */ + switch (tv.model) { + case 88001: + /* Development board - Limit circulation */ + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */ + case 88021: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */ + break; + case 88041: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */ + break; + case 88061: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */ + break; + case 89519: + case 89609: + /* WinTV-HVR2200 (PCIe, Retail, full-height) + * DVB-T (TDA18271/TDA10048) and basic analog, no IR */ + break; + case 89619: + /* WinTV-HVR2200 (PCIe, Retail, half-height) + * DVB-T (TDA18271/TDA10048) and basic analog, no IR */ + break; + default: + printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n", + dev->name, tv.model); + break; + } + + printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name, + tv.model); +} + +void saa7164_card_setup(struct saa7164_dev *dev) +{ + static u8 eeprom[256]; + + if (dev->i2c_bus[0].i2c_rc == 0) { + if (saa7164_api_read_eeprom(dev, &eeprom[0], + sizeof(eeprom)) < 0) + return; + } + + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_5: + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: + hauppauge_eeprom(dev, &eeprom[0]); + break; + } +} + +/* With most other drivers, the kernel expects to communicate with subdrivers + * through i2c. This bridge does not allow that, it does not expose any direct + * access to I2C. Instead we have to communicate through the device f/w for + * register access to 'processing units'. Each unit has a unique + * id, regardless of how the physical implementation occurs across + * the three physical i2c busses. The being said if we want leverge of + * the existing kernel drivers for tuners and demods we have to 'speak i2c', + * to this bridge implements 3 virtual i2c buses. This is a helper function + * for those. + * + * Description: Translate the kernels notion of an i2c address and bus into + * the appropriate unitid. + */ +int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr) +{ + /* For a given bus and i2c device address, return the saa7164 unique + * unitid. < 0 on error */ + + struct saa7164_dev *dev = bus->dev; + struct saa7164_unit *unit; + int i; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + if ((bus->nr == unit->i2c_bus_nr) && + (addr == unit->i2c_bus_addr)) + return unit->id; + } + + return -1; +} + +/* The 7164 API needs to know the i2c register length in advance. + * this is a helper function. Based on a specific chip addr and bus return the + * reg length. + */ +int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr) +{ + /* For a given bus and i2c device address, return the + * saa7164 registry address width. < 0 on error + */ + + struct saa7164_dev *dev = bus->dev; + struct saa7164_unit *unit; + int i; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + + if ((bus->nr == unit->i2c_bus_nr) && + (addr == unit->i2c_bus_addr)) + return unit->i2c_reg_len; + } + + return -1; +} +/* TODO: implement a 'findeeprom' functio like the above and fix any other + * eeprom related todo's in -api.c. + */ + +/* Translate a unitid into a x readable device name, for display purposes. */ +char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid) +{ + char *undefed = "UNDEFINED"; + char *bridge = "BRIDGE"; + struct saa7164_unit *unit; + int i; + + if (unitid == 0) + return bridge; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + + if (unitid == unit->id) + return unit->name; + } + + return undefed; +} + diff --git a/drivers/media/pci/saa7164/saa7164-cmd.c b/drivers/media/pci/saa7164/saa7164-cmd.c new file mode 100644 index 00000000..cfabcbac --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-cmd.c @@ -0,0 +1,589 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include "saa7164.h" + +static int saa7164_cmd_alloc_seqno(struct saa7164_dev *dev) +{ + int i, ret = -1; + + mutex_lock(&dev->lock); + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if (dev->cmds[i].inuse == 0) { + dev->cmds[i].inuse = 1; + dev->cmds[i].signalled = 0; + dev->cmds[i].timeout = 0; + ret = dev->cmds[i].seqno; + break; + } + } + mutex_unlock(&dev->lock); + + return ret; +} + +static void saa7164_cmd_free_seqno(struct saa7164_dev *dev, u8 seqno) +{ + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + dev->cmds[seqno].inuse = 0; + dev->cmds[seqno].signalled = 0; + dev->cmds[seqno].timeout = 0; + } + mutex_unlock(&dev->lock); +} + +static void saa7164_cmd_timeout_seqno(struct saa7164_dev *dev, u8 seqno) +{ + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + dev->cmds[seqno].timeout = 1; + } + mutex_unlock(&dev->lock); +} + +static u32 saa7164_cmd_timeout_get(struct saa7164_dev *dev, u8 seqno) +{ + int ret = 0; + + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + ret = dev->cmds[seqno].timeout; + } + mutex_unlock(&dev->lock); + + return ret; +} + +/* Commands to the f/w get marshelled to/from this code then onto the PCI + * -bus/c running buffer. */ +int saa7164_irq_dequeue(struct saa7164_dev *dev) +{ + int ret = SAA_OK, i = 0; + u32 timeout; + wait_queue_head_t *q = NULL; + u8 tmp[512]; + dprintk(DBGLVL_CMD, "%s()\n", __func__); + + /* While any outstand message on the bus exists... */ + do { + + /* Peek the msg bus */ + struct tmComResInfo tRsp = { 0, 0, 0, 0, 0, 0 }; + ret = saa7164_bus_get(dev, &tRsp, NULL, 1); + if (ret != SAA_OK) + break; + + q = &dev->cmds[tRsp.seqno].wait; + timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno); + dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout); + if (!timeout) { + dprintk(DBGLVL_CMD, + "%s() signalled seqno(%d) (for dequeue)\n", + __func__, tRsp.seqno); + dev->cmds[tRsp.seqno].signalled = 1; + wake_up(q); + } else { + printk(KERN_ERR + "%s() found timed out command on the bus\n", + __func__); + + /* Clean the bus */ + ret = saa7164_bus_get(dev, &tRsp, &tmp, 0); + printk(KERN_ERR "%s() ret = %x\n", __func__, ret); + if (ret == SAA_ERR_EMPTY) + /* Someone else already fetched the response */ + return SAA_OK; + + if (ret != SAA_OK) + return ret; + } + + /* It's unlikely to have more than 4 or 5 pending messages, + * ensure we exit at some point regardless. + */ + } while (i++ < 32); + + return ret; +} + +/* Commands to the f/w get marshelled to/from this code then onto the PCI + * -bus/c running buffer. */ +static int saa7164_cmd_dequeue(struct saa7164_dev *dev) +{ + int loop = 1; + int ret; + u32 timeout; + wait_queue_head_t *q = NULL; + u8 tmp[512]; + dprintk(DBGLVL_CMD, "%s()\n", __func__); + + while (loop) { + + struct tmComResInfo tRsp = { 0, 0, 0, 0, 0, 0 }; + ret = saa7164_bus_get(dev, &tRsp, NULL, 1); + if (ret == SAA_ERR_EMPTY) + return SAA_OK; + + if (ret != SAA_OK) + return ret; + + q = &dev->cmds[tRsp.seqno].wait; + timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno); + dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout); + if (timeout) { + printk(KERN_ERR "found timed out command on the bus\n"); + + /* Clean the bus */ + ret = saa7164_bus_get(dev, &tRsp, &tmp, 0); + printk(KERN_ERR "ret = %x\n", ret); + if (ret == SAA_ERR_EMPTY) + /* Someone else already fetched the response */ + return SAA_OK; + + if (ret != SAA_OK) + return ret; + + if (tRsp.flags & PVC_CMDFLAG_CONTINUE) + printk(KERN_ERR "split response\n"); + else + saa7164_cmd_free_seqno(dev, tRsp.seqno); + + printk(KERN_ERR " timeout continue\n"); + continue; + } + + dprintk(DBGLVL_CMD, "%s() signalled seqno(%d) (for dequeue)\n", + __func__, tRsp.seqno); + dev->cmds[tRsp.seqno].signalled = 1; + wake_up(q); + return SAA_OK; + } + + return SAA_OK; +} + +static int saa7164_cmd_set(struct saa7164_dev *dev, struct tmComResInfo *msg, + void *buf) +{ + struct tmComResBusInfo *bus = &dev->bus; + u8 cmd_sent; + u16 size, idx; + u32 cmds; + void *tmp; + int ret = -1; + + if (!msg) { + printk(KERN_ERR "%s() !msg\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + mutex_lock(&dev->cmds[msg->id].lock); + + size = msg->size; + idx = 0; + cmds = size / bus->m_wMaxReqSize; + if (size % bus->m_wMaxReqSize == 0) + cmds -= 1; + + cmd_sent = 0; + + /* Split the request into smaller chunks */ + for (idx = 0; idx < cmds; idx++) { + + msg->flags |= SAA_CMDFLAG_CONTINUE; + msg->size = bus->m_wMaxReqSize; + tmp = buf + idx * bus->m_wMaxReqSize; + + ret = saa7164_bus_set(dev, msg, tmp); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set failed %d\n", __func__, ret); + + if (cmd_sent) { + ret = SAA_ERR_BUSY; + goto out; + } + ret = SAA_ERR_OVERFLOW; + goto out; + } + cmd_sent = 1; + } + + /* If not the last command... */ + if (idx != 0) + msg->flags &= ~SAA_CMDFLAG_CONTINUE; + + msg->size = size - idx * bus->m_wMaxReqSize; + + ret = saa7164_bus_set(dev, msg, buf + idx * bus->m_wMaxReqSize); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set last failed %d\n", __func__, ret); + + if (cmd_sent) { + ret = SAA_ERR_BUSY; + goto out; + } + ret = SAA_ERR_OVERFLOW; + goto out; + } + ret = SAA_OK; + +out: + mutex_unlock(&dev->cmds[msg->id].lock); + return ret; +} + +/* Wait for a signal event, without holding a mutex. Either return TIMEOUT if + * the event never occurred, or SAA_OK if it was signaled during the wait. + */ +static int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno) +{ + wait_queue_head_t *q = NULL; + int ret = SAA_BUS_TIMEOUT; + unsigned long stamp; + int r; + + if (saa_debug >= 4) + saa7164_bus_dump(dev); + + dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno); + + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + q = &dev->cmds[seqno].wait; + } + mutex_unlock(&dev->lock); + + if (q) { + /* If we haven't been signalled we need to wait */ + if (dev->cmds[seqno].signalled == 0) { + stamp = jiffies; + dprintk(DBGLVL_CMD, + "%s(seqno=%d) Waiting (signalled=%d)\n", + __func__, seqno, dev->cmds[seqno].signalled); + + /* Wait for signalled to be flagged or timeout */ + /* In a highly stressed system this can easily extend + * into multiple seconds before the deferred worker + * is scheduled, and we're woken up via signal. + * We typically are signalled in < 50ms but it can + * take MUCH longer. + */ + wait_event_timeout(*q, dev->cmds[seqno].signalled, + (HZ * waitsecs)); + r = time_before(jiffies, stamp + (HZ * waitsecs)); + if (r) + ret = SAA_OK; + else + saa7164_cmd_timeout_seqno(dev, seqno); + + dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d " + "(signalled=%d)\n", __func__, seqno, r, + dev->cmds[seqno].signalled); + } else + ret = SAA_OK; + } else + printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n", + __func__, seqno); + + return ret; +} + +void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno) +{ + int i; + dprintk(DBGLVL_CMD, "%s()\n", __func__); + + mutex_lock(&dev->lock); + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if (dev->cmds[i].inuse == 1) { + dprintk(DBGLVL_CMD, + "seqno %d inuse, sig = %d, t/out = %d\n", + dev->cmds[i].seqno, + dev->cmds[i].signalled, + dev->cmds[i].timeout); + } + } + + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if ((dev->cmds[i].inuse == 1) && ((i == 0) || + (dev->cmds[i].signalled) || (dev->cmds[i].timeout))) { + dprintk(DBGLVL_CMD, "%s(seqno=%d) calling wake_up\n", + __func__, i); + dev->cmds[i].signalled = 1; + wake_up(&dev->cmds[i].wait); + } + } + mutex_unlock(&dev->lock); +} + +int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command, + u16 controlselector, u16 size, void *buf) +{ + struct tmComResInfo command_t, *pcommand_t; + struct tmComResInfo response_t, *presponse_t; + u8 errdata[256]; + u16 resp_dsize; + u16 data_recd; + u32 loop; + int ret; + int safety = 0; + + dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, " + "sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id, + command, controlselector); + + if ((size == 0) || (buf == NULL)) { + printk(KERN_ERR "%s() Invalid param\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + /* Prepare some basic command/response structures */ + memset(&command_t, 0, sizeof(command_t)); + memset(&response_t, 0, sizeof(response_t)); + pcommand_t = &command_t; + presponse_t = &response_t; + command_t.id = id; + command_t.command = command; + command_t.controlselector = controlselector; + command_t.size = size; + + /* Allocate a unique sequence number */ + ret = saa7164_cmd_alloc_seqno(dev); + if (ret < 0) { + printk(KERN_ERR "%s() No free sequences\n", __func__); + ret = SAA_ERR_NO_RESOURCES; + goto out; + } + + command_t.seqno = (u8)ret; + + /* Send Command */ + resp_dsize = size; + pcommand_t->size = size; + + dprintk(DBGLVL_CMD, "%s() pcommand_t.seqno = %d\n", + __func__, pcommand_t->seqno); + + dprintk(DBGLVL_CMD, "%s() pcommand_t.size = %d\n", + __func__, pcommand_t->size); + + ret = saa7164_cmd_set(dev, pcommand_t, buf); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set command failed %d\n", __func__, ret); + + if (ret != SAA_ERR_BUSY) + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + else + /* Flag a timeout, because at least one + * command was sent */ + saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno); + + goto out; + } + + /* With split responses we have to collect the msgs piece by piece */ + data_recd = 0; + loop = 1; + while (loop) { + dprintk(DBGLVL_CMD, "%s() loop\n", __func__); + + ret = saa7164_cmd_wait(dev, pcommand_t->seqno); + dprintk(DBGLVL_CMD, "%s() loop ret = %d\n", __func__, ret); + + /* if power is down and this is not a power command ... */ + + if (ret == SAA_BUS_TIMEOUT) { + printk(KERN_ERR "Event timed out\n"); + saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno); + return ret; + } + + if (ret != SAA_OK) { + printk(KERN_ERR "spurious error\n"); + return ret; + } + + /* Peek response */ + ret = saa7164_bus_get(dev, presponse_t, NULL, 1); + if (ret == SAA_ERR_EMPTY) { + dprintk(4, "%s() SAA_ERR_EMPTY\n", __func__); + continue; + } + if (ret != SAA_OK) { + printk(KERN_ERR "peek failed\n"); + return ret; + } + + dprintk(DBGLVL_CMD, "%s() presponse_t->seqno = %d\n", + __func__, presponse_t->seqno); + + dprintk(DBGLVL_CMD, "%s() presponse_t->flags = 0x%x\n", + __func__, presponse_t->flags); + + dprintk(DBGLVL_CMD, "%s() presponse_t->size = %d\n", + __func__, presponse_t->size); + + /* Check if the response was for our command */ + if (presponse_t->seqno != pcommand_t->seqno) { + + dprintk(DBGLVL_CMD, + "wrong event: seqno = %d, " + "expected seqno = %d, " + "will dequeue regardless\n", + presponse_t->seqno, pcommand_t->seqno); + + ret = saa7164_cmd_dequeue(dev); + if (ret != SAA_OK) { + printk(KERN_ERR "dequeue failed, ret = %d\n", + ret); + if (safety++ > 16) { + printk(KERN_ERR + "dequeue exceeded, safety exit\n"); + return SAA_ERR_BUSY; + } + } + + continue; + } + + if ((presponse_t->flags & PVC_RESPONSEFLAG_ERROR) != 0) { + + memset(&errdata[0], 0, sizeof(errdata)); + + ret = saa7164_bus_get(dev, presponse_t, &errdata[0], 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get error(2)\n"); + return ret; + } + + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + + dprintk(DBGLVL_CMD, "%s() errdata %02x%02x%02x%02x\n", + __func__, errdata[0], errdata[1], errdata[2], + errdata[3]); + + /* Map error codes */ + dprintk(DBGLVL_CMD, "%s() cmd, error code = 0x%x\n", + __func__, errdata[0]); + + switch (errdata[0]) { + case PVC_ERRORCODE_INVALID_COMMAND: + dprintk(DBGLVL_CMD, "%s() INVALID_COMMAND\n", + __func__); + ret = SAA_ERR_INVALID_COMMAND; + break; + case PVC_ERRORCODE_INVALID_DATA: + dprintk(DBGLVL_CMD, "%s() INVALID_DATA\n", + __func__); + ret = SAA_ERR_BAD_PARAMETER; + break; + case PVC_ERRORCODE_TIMEOUT: + dprintk(DBGLVL_CMD, "%s() TIMEOUT\n", __func__); + ret = SAA_ERR_TIMEOUT; + break; + case PVC_ERRORCODE_NAK: + dprintk(DBGLVL_CMD, "%s() NAK\n", __func__); + ret = SAA_ERR_NULL_PACKET; + break; + case PVC_ERRORCODE_UNKNOWN: + case PVC_ERRORCODE_INVALID_CONTROL: + dprintk(DBGLVL_CMD, + "%s() UNKNOWN OR INVALID CONTROL\n", + __func__); + default: + dprintk(DBGLVL_CMD, "%s() UNKNOWN\n", __func__); + ret = SAA_ERR_NOT_SUPPORTED; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(2) failed\n"); + + return ret; + } + + /* If response is invalid */ + if ((presponse_t->id != pcommand_t->id) || + (presponse_t->command != pcommand_t->command) || + (presponse_t->controlselector != + pcommand_t->controlselector) || + (((resp_dsize - data_recd) != presponse_t->size) && + !(presponse_t->flags & PVC_CMDFLAG_CONTINUE)) || + ((resp_dsize - data_recd) < presponse_t->size)) { + + /* Invalid */ + dprintk(DBGLVL_CMD, "%s() Invalid\n", __func__); + ret = saa7164_bus_get(dev, presponse_t, NULL, 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get failed\n"); + return ret; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(3) failed\n"); + continue; + } + + /* OK, now we're actually getting out correct response */ + ret = saa7164_bus_get(dev, presponse_t, buf + data_recd, 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get failed\n"); + return ret; + } + + data_recd = presponse_t->size + data_recd; + if (resp_dsize == data_recd) { + dprintk(DBGLVL_CMD, "%s() Resp recd\n", __func__); + break; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(3) failed\n"); + + continue; + + } /* (loop) */ + + /* Release the sequence number allocation */ + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + + /* if powerdown signal all pending commands */ + + dprintk(DBGLVL_CMD, "%s() Calling dequeue then exit\n", __func__); + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(4) failed\n"); + + ret = SAA_OK; +out: + return ret; +} + diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c new file mode 100644 index 00000000..62141b8f --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -0,0 +1,1490 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PROC_FS +#include +#endif +#include "saa7164.h" + +MODULE_DESCRIPTION("Driver for NXP SAA7164 based TV cards"); +MODULE_AUTHOR("Steven Toth "); +MODULE_LICENSE("GPL"); + +/* + * 1 Basic + * 2 + * 4 i2c + * 8 api + * 16 cmd + * 32 bus + */ + +unsigned int saa_debug; +module_param_named(debug, saa_debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +unsigned int fw_debug; +module_param(fw_debug, int, 0644); +MODULE_PARM_DESC(fw_debug, "Firmware debug level def:2"); + +unsigned int encoder_buffers = SAA7164_MAX_ENCODER_BUFFERS; +module_param(encoder_buffers, int, 0644); +MODULE_PARM_DESC(encoder_buffers, "Total buffers in read queue 16-512 def:64"); + +unsigned int vbi_buffers = SAA7164_MAX_VBI_BUFFERS; +module_param(vbi_buffers, int, 0644); +MODULE_PARM_DESC(vbi_buffers, "Total buffers in read queue 16-512 def:64"); + +unsigned int waitsecs = 10; +module_param(waitsecs, int, 0644); +MODULE_PARM_DESC(waitsecs, "timeout on firmware messages"); + +static unsigned int card[] = {[0 ... (SAA7164_MAXBOARDS - 1)] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +unsigned int print_histogram = 64; +module_param(print_histogram, int, 0644); +MODULE_PARM_DESC(print_histogram, "print histogram values once"); + +unsigned int crc_checking = 1; +module_param(crc_checking, int, 0644); +MODULE_PARM_DESC(crc_checking, "enable crc sanity checking on buffers"); + +unsigned int guard_checking = 1; +module_param(guard_checking, int, 0644); +MODULE_PARM_DESC(guard_checking, + "enable dma sanity checking for buffer overruns"); + +static unsigned int saa7164_devcount; + +static DEFINE_MUTEX(devlist); +LIST_HEAD(saa7164_devlist); + +#define INT_SIZE 16 + +static void saa7164_pack_verifier(struct saa7164_buffer *buf) +{ + u8 *p = (u8 *)buf->cpu; + int i; + + for (i = 0; i < buf->actual_size; i += 2048) { + + if ((*(p + i + 0) != 0x00) || (*(p + i + 1) != 0x00) || + (*(p + i + 2) != 0x01) || (*(p + i + 3) != 0xBA)) { + printk(KERN_ERR "No pack at 0x%x\n", i); +#if 0 + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, + p + 1, 32, false); +#endif + } + } +} + +#define FIXED_VIDEO_PID 0xf1 +#define FIXED_AUDIO_PID 0xf2 + +static void saa7164_ts_verifier(struct saa7164_buffer *buf) +{ + struct saa7164_port *port = buf->port; + u32 i; + u8 cc, a; + u16 pid; + u8 __iomem *bufcpu = (u8 *)buf->cpu; + + port->sync_errors = 0; + port->v_cc_errors = 0; + port->a_cc_errors = 0; + + for (i = 0; i < buf->actual_size; i += 188) { + if (*(bufcpu + i) != 0x47) + port->sync_errors++; + + /* TODO: Query pid lower 8 bits, ignoring upper bits intensionally */ + pid = ((*(bufcpu + i + 1) & 0x1f) << 8) | *(bufcpu + i + 2); + cc = *(bufcpu + i + 3) & 0x0f; + + if (pid == FIXED_VIDEO_PID) { + a = ((port->last_v_cc + 1) & 0x0f); + if (a != cc) { + printk(KERN_ERR "video cc last = %x current = %x i = %d\n", + port->last_v_cc, cc, i); + port->v_cc_errors++; + } + + port->last_v_cc = cc; + } else + if (pid == FIXED_AUDIO_PID) { + a = ((port->last_a_cc + 1) & 0x0f); + if (a != cc) { + printk(KERN_ERR "audio cc last = %x current = %x i = %d\n", + port->last_a_cc, cc, i); + port->a_cc_errors++; + } + + port->last_a_cc = cc; + } + + } + + /* Only report errors if we've been through this function atleast + * once already and the cached cc values are primed. First time through + * always generates errors. + */ + if (port->v_cc_errors && (port->done_first_interrupt > 1)) + printk(KERN_ERR "video pid cc, %d errors\n", port->v_cc_errors); + + if (port->a_cc_errors && (port->done_first_interrupt > 1)) + printk(KERN_ERR "audio pid cc, %d errors\n", port->a_cc_errors); + + if (port->sync_errors && (port->done_first_interrupt > 1)) + printk(KERN_ERR "sync_errors = %d\n", port->sync_errors); + + if (port->done_first_interrupt == 1) + port->done_first_interrupt++; +} + +static void saa7164_histogram_reset(struct saa7164_histogram *hg, char *name) +{ + int i; + + memset(hg, 0, sizeof(struct saa7164_histogram)); + strcpy(hg->name, name); + + /* First 30ms x 1ms */ + for (i = 0; i < 30; i++) + hg->counter1[0 + i].val = i; + + /* 30 - 200ms x 10ms */ + for (i = 0; i < 18; i++) + hg->counter1[30 + i].val = 30 + (i * 10); + + /* 200 - 2000ms x 100ms */ + for (i = 0; i < 15; i++) + hg->counter1[48 + i].val = 200 + (i * 200); + + /* Catch all massive value (2secs) */ + hg->counter1[55].val = 2000; + + /* Catch all massive value (4secs) */ + hg->counter1[56].val = 4000; + + /* Catch all massive value (8secs) */ + hg->counter1[57].val = 8000; + + /* Catch all massive value (15secs) */ + hg->counter1[58].val = 15000; + + /* Catch all massive value (30secs) */ + hg->counter1[59].val = 30000; + + /* Catch all massive value (60secs) */ + hg->counter1[60].val = 60000; + + /* Catch all massive value (5mins) */ + hg->counter1[61].val = 300000; + + /* Catch all massive value (15mins) */ + hg->counter1[62].val = 900000; + + /* Catch all massive values (1hr) */ + hg->counter1[63].val = 3600000; +} + +void saa7164_histogram_update(struct saa7164_histogram *hg, u32 val) +{ + int i; + for (i = 0; i < 64; i++) { + if (val <= hg->counter1[i].val) { + hg->counter1[i].count++; + hg->counter1[i].update_time = jiffies; + break; + } + } +} + +static void saa7164_histogram_print(struct saa7164_port *port, + struct saa7164_histogram *hg) +{ + u32 entries = 0; + int i; + + printk(KERN_ERR "Histogram named %s (ms, count, last_update_jiffy)\n", hg->name); + for (i = 0; i < 64; i++) { + if (hg->counter1[i].count == 0) + continue; + + printk(KERN_ERR " %4d %12d %Ld\n", + hg->counter1[i].val, + hg->counter1[i].count, + hg->counter1[i].update_time); + + entries++; + } + printk(KERN_ERR "Total: %d\n", entries); +} + +static void saa7164_work_enchandler_helper(struct saa7164_port *port, int bufnr) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf = NULL; + struct saa7164_user_buffer *ubuf = NULL; + struct list_head *c, *n; + int i = 0; + u8 __iomem *p; + + mutex_lock(&port->dmaqueue_lock); + list_for_each_safe(c, n, &port->dmaqueue.list) { + + buf = list_entry(c, struct saa7164_buffer, list); + if (i++ > port->hwcfg.buffercount) { + printk(KERN_ERR "%s() illegal i count %d\n", + __func__, i); + break; + } + + if (buf->idx == bufnr) { + + /* Found the buffer, deal with it */ + dprintk(DBGLVL_IRQ, "%s() bufnr: %d\n", __func__, bufnr); + + if (crc_checking) { + /* Throw a new checksum on the dma buffer */ + buf->crc = crc32(0, buf->cpu, buf->actual_size); + } + + if (guard_checking) { + p = (u8 *)buf->cpu; + if ((*(p + buf->actual_size + 0) != 0xff) || + (*(p + buf->actual_size + 1) != 0xff) || + (*(p + buf->actual_size + 2) != 0xff) || + (*(p + buf->actual_size + 3) != 0xff) || + (*(p + buf->actual_size + 0x10) != 0xff) || + (*(p + buf->actual_size + 0x11) != 0xff) || + (*(p + buf->actual_size + 0x12) != 0xff) || + (*(p + buf->actual_size + 0x13) != 0xff)) { + printk(KERN_ERR "%s() buf %p guard buffer breach\n", + __func__, buf); +#if 0 + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, + p + buf->actual_size - 32, 64, false); +#endif + } + } + + if ((port->nr != SAA7164_PORT_VBI1) && (port->nr != SAA7164_PORT_VBI2)) { + /* Validate the incoming buffer content */ + if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_TS) + saa7164_ts_verifier(buf); + else if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS) + saa7164_pack_verifier(buf); + } + + /* find a free user buffer and clone to it */ + if (!list_empty(&port->list_buf_free.list)) { + + /* Pull the first buffer from the used list */ + ubuf = list_first_entry(&port->list_buf_free.list, + struct saa7164_user_buffer, list); + + if (buf->actual_size <= ubuf->actual_size) { + + memcpy_fromio(ubuf->data, buf->cpu, + ubuf->actual_size); + + if (crc_checking) { + /* Throw a new checksum on the read buffer */ + ubuf->crc = crc32(0, ubuf->data, ubuf->actual_size); + } + + /* Requeue the buffer on the free list */ + ubuf->pos = 0; + + list_move_tail(&ubuf->list, + &port->list_buf_used.list); + + /* Flag any userland waiters */ + wake_up_interruptible(&port->wait_read); + + } else { + printk(KERN_ERR "buf %p bufsize fails match\n", buf); + } + + } else + printk(KERN_ERR "encirq no free buffers, increase param encoder_buffers\n"); + + /* Ensure offset into buffer remains 0, fill buffer + * with known bad data. We check for this data at a later point + * in time. */ + saa7164_buffer_zero_offsets(port, bufnr); + memset_io(buf->cpu, 0xff, buf->pci_size); + if (crc_checking) { + /* Throw yet aanother new checksum on the dma buffer */ + buf->crc = crc32(0, buf->cpu, buf->actual_size); + } + + break; + } + } + mutex_unlock(&port->dmaqueue_lock); +} + +static void saa7164_work_enchandler(struct work_struct *w) +{ + struct saa7164_port *port = + container_of(w, struct saa7164_port, workenc); + struct saa7164_dev *dev = port->dev; + + u32 wp, mcb, rp, cnt = 0; + + port->last_svc_msecs_diff = port->last_svc_msecs; + port->last_svc_msecs = jiffies_to_msecs(jiffies); + + port->last_svc_msecs_diff = port->last_svc_msecs - + port->last_svc_msecs_diff; + + saa7164_histogram_update(&port->svc_interval, + port->last_svc_msecs_diff); + + port->last_irq_svc_msecs_diff = port->last_svc_msecs - + port->last_irq_msecs; + + saa7164_histogram_update(&port->irq_svc_interval, + port->last_irq_svc_msecs_diff); + + dprintk(DBGLVL_IRQ, + "%s() %Ldms elapsed irq->deferred %Ldms wp: %d rp: %d\n", + __func__, + port->last_svc_msecs_diff, + port->last_irq_svc_msecs_diff, + port->last_svc_wp, + port->last_svc_rp + ); + + /* Current write position */ + wp = saa7164_readl(port->bufcounter); + if (wp > (port->hwcfg.buffercount - 1)) { + printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp); + return; + } + + /* Most current complete buffer */ + if (wp == 0) + mcb = (port->hwcfg.buffercount - 1); + else + mcb = wp - 1; + + while (1) { + if (port->done_first_interrupt == 0) { + port->done_first_interrupt++; + rp = mcb; + } else + rp = (port->last_svc_rp + 1) % 8; + + if (rp > (port->hwcfg.buffercount - 1)) { + printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp); + break; + } + + saa7164_work_enchandler_helper(port, rp); + port->last_svc_rp = rp; + cnt++; + + if (rp == mcb) + break; + } + + /* TODO: Convert this into a /proc/saa7164 style readable file */ + if (print_histogram == port->nr) { + saa7164_histogram_print(port, &port->irq_interval); + saa7164_histogram_print(port, &port->svc_interval); + saa7164_histogram_print(port, &port->irq_svc_interval); + saa7164_histogram_print(port, &port->read_interval); + saa7164_histogram_print(port, &port->poll_interval); + /* TODO: fix this to preserve any previous state */ + print_histogram = 64 + port->nr; + } +} + +static void saa7164_work_vbihandler(struct work_struct *w) +{ + struct saa7164_port *port = + container_of(w, struct saa7164_port, workenc); + struct saa7164_dev *dev = port->dev; + + u32 wp, mcb, rp, cnt = 0; + + port->last_svc_msecs_diff = port->last_svc_msecs; + port->last_svc_msecs = jiffies_to_msecs(jiffies); + port->last_svc_msecs_diff = port->last_svc_msecs - + port->last_svc_msecs_diff; + + saa7164_histogram_update(&port->svc_interval, + port->last_svc_msecs_diff); + + port->last_irq_svc_msecs_diff = port->last_svc_msecs - + port->last_irq_msecs; + + saa7164_histogram_update(&port->irq_svc_interval, + port->last_irq_svc_msecs_diff); + + dprintk(DBGLVL_IRQ, + "%s() %Ldms elapsed irq->deferred %Ldms wp: %d rp: %d\n", + __func__, + port->last_svc_msecs_diff, + port->last_irq_svc_msecs_diff, + port->last_svc_wp, + port->last_svc_rp + ); + + /* Current write position */ + wp = saa7164_readl(port->bufcounter); + if (wp > (port->hwcfg.buffercount - 1)) { + printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp); + return; + } + + /* Most current complete buffer */ + if (wp == 0) + mcb = (port->hwcfg.buffercount - 1); + else + mcb = wp - 1; + + while (1) { + if (port->done_first_interrupt == 0) { + port->done_first_interrupt++; + rp = mcb; + } else + rp = (port->last_svc_rp + 1) % 8; + + if (rp > (port->hwcfg.buffercount - 1)) { + printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp); + break; + } + + saa7164_work_enchandler_helper(port, rp); + port->last_svc_rp = rp; + cnt++; + + if (rp == mcb) + break; + } + + /* TODO: Convert this into a /proc/saa7164 style readable file */ + if (print_histogram == port->nr) { + saa7164_histogram_print(port, &port->irq_interval); + saa7164_histogram_print(port, &port->svc_interval); + saa7164_histogram_print(port, &port->irq_svc_interval); + saa7164_histogram_print(port, &port->read_interval); + saa7164_histogram_print(port, &port->poll_interval); + /* TODO: fix this to preserve any previous state */ + print_histogram = 64 + port->nr; + } +} + +static void saa7164_work_cmdhandler(struct work_struct *w) +{ + struct saa7164_dev *dev = container_of(w, struct saa7164_dev, workcmd); + + /* Wake up any complete commands */ + saa7164_irq_dequeue(dev); +} + +static void saa7164_buffer_deliver(struct saa7164_buffer *buf) +{ + struct saa7164_port *port = buf->port; + + /* Feed the transport payload into the kernel demux */ + dvb_dmx_swfilter_packets(&port->dvb.demux, (u8 *)buf->cpu, + SAA7164_TS_NUMBER_OF_LINES); + +} + +static irqreturn_t saa7164_irq_vbi(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + + /* Store old time */ + port->last_irq_msecs_diff = port->last_irq_msecs; + + /* Collect new stats */ + port->last_irq_msecs = jiffies_to_msecs(jiffies); + + /* Calculate stats */ + port->last_irq_msecs_diff = port->last_irq_msecs - + port->last_irq_msecs_diff; + + saa7164_histogram_update(&port->irq_interval, + port->last_irq_msecs_diff); + + dprintk(DBGLVL_IRQ, "%s() %Ldms elapsed\n", __func__, + port->last_irq_msecs_diff); + + /* Tis calls the vbi irq handler */ + schedule_work(&port->workenc); + return 0; +} + +static irqreturn_t saa7164_irq_encoder(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + + /* Store old time */ + port->last_irq_msecs_diff = port->last_irq_msecs; + + /* Collect new stats */ + port->last_irq_msecs = jiffies_to_msecs(jiffies); + + /* Calculate stats */ + port->last_irq_msecs_diff = port->last_irq_msecs - + port->last_irq_msecs_diff; + + saa7164_histogram_update(&port->irq_interval, + port->last_irq_msecs_diff); + + dprintk(DBGLVL_IRQ, "%s() %Ldms elapsed\n", __func__, + port->last_irq_msecs_diff); + + schedule_work(&port->workenc); + return 0; +} + +static irqreturn_t saa7164_irq_ts(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct list_head *c, *n; + int wp, i = 0, rp; + + /* Find the current write point from the hardware */ + wp = saa7164_readl(port->bufcounter); + if (wp > (port->hwcfg.buffercount - 1)) + BUG(); + + /* Find the previous buffer to the current write point */ + if (wp == 0) + rp = (port->hwcfg.buffercount - 1); + else + rp = wp - 1; + + /* Lookup the WP in the buffer list */ + /* TODO: turn this into a worker thread */ + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + if (i++ > port->hwcfg.buffercount) + BUG(); + + if (buf->idx == rp) { + /* Found the buffer, deal with it */ + dprintk(DBGLVL_IRQ, "%s() wp: %d processing: %d\n", + __func__, wp, rp); + saa7164_buffer_deliver(buf); + break; + } + + } + return 0; +} + +/* Primary IRQ handler and dispatch mechanism */ +static irqreturn_t saa7164_irq(int irq, void *dev_id) +{ + struct saa7164_dev *dev = dev_id; + struct saa7164_port *porta = &dev->ports[SAA7164_PORT_TS1]; + struct saa7164_port *portb = &dev->ports[SAA7164_PORT_TS2]; + struct saa7164_port *portc = &dev->ports[SAA7164_PORT_ENC1]; + struct saa7164_port *portd = &dev->ports[SAA7164_PORT_ENC2]; + struct saa7164_port *porte = &dev->ports[SAA7164_PORT_VBI1]; + struct saa7164_port *portf = &dev->ports[SAA7164_PORT_VBI2]; + + u32 intid, intstat[INT_SIZE/4]; + int i, handled = 0, bit; + + if (dev == NULL) { + printk(KERN_ERR "%s() No device specified\n", __func__); + handled = 0; + goto out; + } + + /* Check that the hardware is accessible. If the status bytes are + * 0xFF then the device is not accessible, the the IRQ belongs + * to another driver. + * 4 x u32 interrupt registers. + */ + for (i = 0; i < INT_SIZE/4; i++) { + + /* TODO: Convert into saa7164_readl() */ + /* Read the 4 hardware interrupt registers */ + intstat[i] = saa7164_readl(dev->int_status + (i * 4)); + + if (intstat[i]) + handled = 1; + } + if (handled == 0) + goto out; + + /* For each of the HW interrupt registers */ + for (i = 0; i < INT_SIZE/4; i++) { + + if (intstat[i]) { + /* Each function of the board has it's own interruptid. + * Find the function that triggered then call + * it's handler. + */ + for (bit = 0; bit < 32; bit++) { + + if (((intstat[i] >> bit) & 0x00000001) == 0) + continue; + + /* Calculate the interrupt id (0x00 to 0x7f) */ + + intid = (i * 32) + bit; + if (intid == dev->intfdesc.bInterruptId) { + /* A response to an cmd/api call */ + schedule_work(&dev->workcmd); + } else if (intid == porta->hwcfg.interruptid) { + + /* Transport path 1 */ + saa7164_irq_ts(porta); + + } else if (intid == portb->hwcfg.interruptid) { + + /* Transport path 2 */ + saa7164_irq_ts(portb); + + } else if (intid == portc->hwcfg.interruptid) { + + /* Encoder path 1 */ + saa7164_irq_encoder(portc); + + } else if (intid == portd->hwcfg.interruptid) { + + /* Encoder path 2 */ + saa7164_irq_encoder(portd); + + } else if (intid == porte->hwcfg.interruptid) { + + /* VBI path 1 */ + saa7164_irq_vbi(porte); + + } else if (intid == portf->hwcfg.interruptid) { + + /* VBI path 2 */ + saa7164_irq_vbi(portf); + + } else { + /* Find the function */ + dprintk(DBGLVL_IRQ, + "%s() unhandled interrupt " + "reg 0x%x bit 0x%x " + "intid = 0x%x\n", + __func__, i, bit, intid); + } + } + + /* Ack it */ + saa7164_writel(dev->int_ack + (i * 4), intstat[i]); + + } + } +out: + return IRQ_RETVAL(handled); +} + +void saa7164_getfirmwarestatus(struct saa7164_dev *dev) +{ + struct saa7164_fw_status *s = &dev->fw_status; + + dev->fw_status.status = saa7164_readl(SAA_DEVICE_SYSINIT_STATUS); + dev->fw_status.mode = saa7164_readl(SAA_DEVICE_SYSINIT_MODE); + dev->fw_status.spec = saa7164_readl(SAA_DEVICE_SYSINIT_SPEC); + dev->fw_status.inst = saa7164_readl(SAA_DEVICE_SYSINIT_INST); + dev->fw_status.cpuload = saa7164_readl(SAA_DEVICE_SYSINIT_CPULOAD); + dev->fw_status.remainheap = + saa7164_readl(SAA_DEVICE_SYSINIT_REMAINHEAP); + + dprintk(1, "Firmware status:\n"); + dprintk(1, " .status = 0x%08x\n", s->status); + dprintk(1, " .mode = 0x%08x\n", s->mode); + dprintk(1, " .spec = 0x%08x\n", s->spec); + dprintk(1, " .inst = 0x%08x\n", s->inst); + dprintk(1, " .cpuload = 0x%08x\n", s->cpuload); + dprintk(1, " .remainheap = 0x%08x\n", s->remainheap); +} + +u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev) +{ + u32 reg; + + reg = saa7164_readl(SAA_DEVICE_VERSION); + dprintk(1, "Device running firmware version %d.%d.%d.%d (0x%x)\n", + (reg & 0x0000fc00) >> 10, + (reg & 0x000003e0) >> 5, + (reg & 0x0000001f), + (reg & 0xffff0000) >> 16, + reg); + + return reg; +} + +/* TODO: Debugging func, remove */ +void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr) +{ + int i; + + dprintk(1, "--------------------> " + "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); + + for (i = 0; i < 0x100; i += 16) + dprintk(1, "region0[0x%08x] = " + "%02x %02x %02x %02x %02x %02x %02x %02x" + " %02x %02x %02x %02x %02x %02x %02x %02x\n", i, + (u8)saa7164_readb(addr + i + 0), + (u8)saa7164_readb(addr + i + 1), + (u8)saa7164_readb(addr + i + 2), + (u8)saa7164_readb(addr + i + 3), + (u8)saa7164_readb(addr + i + 4), + (u8)saa7164_readb(addr + i + 5), + (u8)saa7164_readb(addr + i + 6), + (u8)saa7164_readb(addr + i + 7), + (u8)saa7164_readb(addr + i + 8), + (u8)saa7164_readb(addr + i + 9), + (u8)saa7164_readb(addr + i + 10), + (u8)saa7164_readb(addr + i + 11), + (u8)saa7164_readb(addr + i + 12), + (u8)saa7164_readb(addr + i + 13), + (u8)saa7164_readb(addr + i + 14), + (u8)saa7164_readb(addr + i + 15) + ); +} + +static void saa7164_dump_hwdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p hwdesc sizeof(struct tmComResHWDescr) = %d bytes\n", + &dev->hwdesc, (u32)sizeof(struct tmComResHWDescr)); + + dprintk(1, " .bLength = 0x%x\n", dev->hwdesc.bLength); + dprintk(1, " .bDescriptorType = 0x%x\n", dev->hwdesc.bDescriptorType); + dprintk(1, " .bDescriptorSubtype = 0x%x\n", + dev->hwdesc.bDescriptorSubtype); + + dprintk(1, " .bcdSpecVersion = 0x%x\n", dev->hwdesc.bcdSpecVersion); + dprintk(1, " .dwClockFrequency = 0x%x\n", dev->hwdesc.dwClockFrequency); + dprintk(1, " .dwClockUpdateRes = 0x%x\n", dev->hwdesc.dwClockUpdateRes); + dprintk(1, " .bCapabilities = 0x%x\n", dev->hwdesc.bCapabilities); + dprintk(1, " .dwDeviceRegistersLocation = 0x%x\n", + dev->hwdesc.dwDeviceRegistersLocation); + + dprintk(1, " .dwHostMemoryRegion = 0x%x\n", + dev->hwdesc.dwHostMemoryRegion); + + dprintk(1, " .dwHostMemoryRegionSize = 0x%x\n", + dev->hwdesc.dwHostMemoryRegionSize); + + dprintk(1, " .dwHostHibernatMemRegion = 0x%x\n", + dev->hwdesc.dwHostHibernatMemRegion); + + dprintk(1, " .dwHostHibernatMemRegionSize = 0x%x\n", + dev->hwdesc.dwHostHibernatMemRegionSize); +} + +static void saa7164_dump_intfdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p intfdesc " + "sizeof(struct tmComResInterfaceDescr) = %d bytes\n", + &dev->intfdesc, (u32)sizeof(struct tmComResInterfaceDescr)); + + dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength); + dprintk(1, " .bDescriptorType = 0x%x\n", dev->intfdesc.bDescriptorType); + dprintk(1, " .bDescriptorSubtype = 0x%x\n", + dev->intfdesc.bDescriptorSubtype); + + dprintk(1, " .bFlags = 0x%x\n", dev->intfdesc.bFlags); + dprintk(1, " .bInterfaceType = 0x%x\n", dev->intfdesc.bInterfaceType); + dprintk(1, " .bInterfaceId = 0x%x\n", dev->intfdesc.bInterfaceId); + dprintk(1, " .bBaseInterface = 0x%x\n", dev->intfdesc.bBaseInterface); + dprintk(1, " .bInterruptId = 0x%x\n", dev->intfdesc.bInterruptId); + dprintk(1, " .bDebugInterruptId = 0x%x\n", + dev->intfdesc.bDebugInterruptId); + + dprintk(1, " .BARLocation = 0x%x\n", dev->intfdesc.BARLocation); +} + +static void saa7164_dump_busdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p busdesc sizeof(struct tmComResBusDescr) = %d bytes\n", + &dev->busdesc, (u32)sizeof(struct tmComResBusDescr)); + + dprintk(1, " .CommandRing = 0x%016Lx\n", dev->busdesc.CommandRing); + dprintk(1, " .ResponseRing = 0x%016Lx\n", dev->busdesc.ResponseRing); + dprintk(1, " .CommandWrite = 0x%x\n", dev->busdesc.CommandWrite); + dprintk(1, " .CommandRead = 0x%x\n", dev->busdesc.CommandRead); + dprintk(1, " .ResponseWrite = 0x%x\n", dev->busdesc.ResponseWrite); + dprintk(1, " .ResponseRead = 0x%x\n", dev->busdesc.ResponseRead); +} + +/* Much of the hardware configuration and PCI registers are configured + * dynamically depending on firmware. We have to cache some initial + * structures then use these to locate other important structures + * from PCI space. + */ +static void saa7164_get_descriptors(struct saa7164_dev *dev) +{ + memcpy_fromio(&dev->hwdesc, dev->bmmio, sizeof(struct tmComResHWDescr)); + memcpy_fromio(&dev->intfdesc, dev->bmmio + sizeof(struct tmComResHWDescr), + sizeof(struct tmComResInterfaceDescr)); + memcpy_fromio(&dev->busdesc, dev->bmmio + dev->intfdesc.BARLocation, + sizeof(struct tmComResBusDescr)); + + if (dev->hwdesc.bLength != sizeof(struct tmComResHWDescr)) { + printk(KERN_ERR "Structure struct tmComResHWDescr is mangled\n"); + printk(KERN_ERR "Need %x got %d\n", dev->hwdesc.bLength, + (u32)sizeof(struct tmComResHWDescr)); + } else + saa7164_dump_hwdesc(dev); + + if (dev->intfdesc.bLength != sizeof(struct tmComResInterfaceDescr)) { + printk(KERN_ERR "struct struct tmComResInterfaceDescr is mangled\n"); + printk(KERN_ERR "Need %x got %d\n", dev->intfdesc.bLength, + (u32)sizeof(struct tmComResInterfaceDescr)); + } else + saa7164_dump_intfdesc(dev); + + saa7164_dump_busdesc(dev); +} + +static int saa7164_pci_quirks(struct saa7164_dev *dev) +{ + return 0; +} + +static int get_resources(struct saa7164_dev *dev) +{ + if (request_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0), dev->name)) { + + if (request_mem_region(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2), dev->name)) + return 0; + } + + printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n", + dev->name, + (u64)pci_resource_start(dev->pci, 0), + (u64)pci_resource_start(dev->pci, 2)); + + return -EBUSY; +} + +static int saa7164_port_init(struct saa7164_dev *dev, int portnr) +{ + struct saa7164_port *port = NULL; + + if ((portnr < 0) || (portnr >= SAA7164_MAX_PORTS)) + BUG(); + + port = &dev->ports[portnr]; + + port->dev = dev; + port->nr = portnr; + + if ((portnr == SAA7164_PORT_TS1) || (portnr == SAA7164_PORT_TS2)) + port->type = SAA7164_MPEG_DVB; + else + if ((portnr == SAA7164_PORT_ENC1) || (portnr == SAA7164_PORT_ENC2)) { + port->type = SAA7164_MPEG_ENCODER; + + /* We need a deferred interrupt handler for cmd handling */ + INIT_WORK(&port->workenc, saa7164_work_enchandler); + } else if ((portnr == SAA7164_PORT_VBI1) || (portnr == SAA7164_PORT_VBI2)) { + port->type = SAA7164_MPEG_VBI; + + /* We need a deferred interrupt handler for cmd handling */ + INIT_WORK(&port->workenc, saa7164_work_vbihandler); + } else + BUG(); + + /* Init all the critical resources */ + mutex_init(&port->dvb.lock); + INIT_LIST_HEAD(&port->dmaqueue.list); + mutex_init(&port->dmaqueue_lock); + + INIT_LIST_HEAD(&port->list_buf_used.list); + INIT_LIST_HEAD(&port->list_buf_free.list); + init_waitqueue_head(&port->wait_read); + + + saa7164_histogram_reset(&port->irq_interval, "irq intervals"); + saa7164_histogram_reset(&port->svc_interval, "deferred intervals"); + saa7164_histogram_reset(&port->irq_svc_interval, + "irq to deferred intervals"); + saa7164_histogram_reset(&port->read_interval, + "encoder/vbi read() intervals"); + saa7164_histogram_reset(&port->poll_interval, + "encoder/vbi poll() intervals"); + + return 0; +} + +static int saa7164_dev_setup(struct saa7164_dev *dev) +{ + int i; + + mutex_init(&dev->lock); + atomic_inc(&dev->refcount); + dev->nr = saa7164_devcount++; + + snprintf(dev->name, sizeof(dev->name), "saa7164[%d]", dev->nr); + + mutex_lock(&devlist); + list_add_tail(&dev->devlist, &saa7164_devlist); + mutex_unlock(&devlist); + + /* board config */ + dev->board = UNSET; + if (card[dev->nr] < saa7164_bcount) + dev->board = card[dev->nr]; + + for (i = 0; UNSET == dev->board && i < saa7164_idcount; i++) + if (dev->pci->subsystem_vendor == saa7164_subids[i].subvendor && + dev->pci->subsystem_device == + saa7164_subids[i].subdevice) + dev->board = saa7164_subids[i].card; + + if (UNSET == dev->board) { + dev->board = SAA7164_BOARD_UNKNOWN; + saa7164_card_list(dev); + } + + dev->pci_bus = dev->pci->bus->number; + dev->pci_slot = PCI_SLOT(dev->pci->devfn); + + /* I2C Defaults / setup */ + dev->i2c_bus[0].dev = dev; + dev->i2c_bus[0].nr = 0; + dev->i2c_bus[1].dev = dev; + dev->i2c_bus[1].nr = 1; + dev->i2c_bus[2].dev = dev; + dev->i2c_bus[2].nr = 2; + + /* Transport + Encoder ports 1, 2, 3, 4 - Defaults / setup */ + saa7164_port_init(dev, SAA7164_PORT_TS1); + saa7164_port_init(dev, SAA7164_PORT_TS2); + saa7164_port_init(dev, SAA7164_PORT_ENC1); + saa7164_port_init(dev, SAA7164_PORT_ENC2); + saa7164_port_init(dev, SAA7164_PORT_VBI1); + saa7164_port_init(dev, SAA7164_PORT_VBI2); + + if (get_resources(dev) < 0) { + printk(KERN_ERR "CORE %s No more PCIe resources for " + "subsystem: %04x:%04x\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device); + + saa7164_devcount--; + return -ENODEV; + } + + /* PCI/e allocations */ + dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + dev->lmmio2 = ioremap(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2)); + + dev->bmmio = (u8 __iomem *)dev->lmmio; + dev->bmmio2 = (u8 __iomem *)dev->lmmio2; + + /* Inerrupt and ack register locations offset of bmmio */ + dev->int_status = 0x183000 + 0xf80; + dev->int_ack = 0x183000 + 0xf90; + + printk(KERN_INFO + "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device, saa7164_boards[dev->board].name, + dev->board, card[dev->nr] == dev->board ? + "insmod option" : "autodetected"); + + saa7164_pci_quirks(dev); + + return 0; +} + +static void saa7164_dev_unregister(struct saa7164_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + release_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + release_mem_region(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2)); + + if (!atomic_dec_and_test(&dev->refcount)) + return; + + iounmap(dev->lmmio); + iounmap(dev->lmmio2); + + return; +} + +#ifdef CONFIG_PROC_FS +static int saa7164_proc_show(struct seq_file *m, void *v) +{ + struct saa7164_dev *dev; + struct tmComResBusInfo *b; + struct list_head *list; + int i, c; + + if (saa7164_devcount == 0) + return 0; + + list_for_each(list, &saa7164_devlist) { + dev = list_entry(list, struct saa7164_dev, devlist); + seq_printf(m, "%s = %p\n", dev->name, dev); + + /* Lock the bus from any other access */ + b = &dev->bus; + mutex_lock(&b->lock); + + seq_printf(m, " .m_pdwSetWritePos = 0x%x (0x%08x)\n", + b->m_dwSetReadPos, saa7164_readl(b->m_dwSetReadPos)); + + seq_printf(m, " .m_pdwSetReadPos = 0x%x (0x%08x)\n", + b->m_dwSetWritePos, saa7164_readl(b->m_dwSetWritePos)); + + seq_printf(m, " .m_pdwGetWritePos = 0x%x (0x%08x)\n", + b->m_dwGetReadPos, saa7164_readl(b->m_dwGetReadPos)); + + seq_printf(m, " .m_pdwGetReadPos = 0x%x (0x%08x)\n", + b->m_dwGetWritePos, saa7164_readl(b->m_dwGetWritePos)); + c = 0; + seq_printf(m, "\n Set Ring:\n"); + seq_printf(m, "\n addr 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); + for (i = 0; i < b->m_dwSizeSetRing; i++) { + if (c == 0) + seq_printf(m, " %04x:", i); + + seq_printf(m, " %02x", *(b->m_pdwSetRing + i)); + + if (++c == 16) { + seq_printf(m, "\n"); + c = 0; + } + } + + c = 0; + seq_printf(m, "\n Get Ring:\n"); + seq_printf(m, "\n addr 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); + for (i = 0; i < b->m_dwSizeGetRing; i++) { + if (c == 0) + seq_printf(m, " %04x:", i); + + seq_printf(m, " %02x", *(b->m_pdwGetRing + i)); + + if (++c == 16) { + seq_printf(m, "\n"); + c = 0; + } + } + + mutex_unlock(&b->lock); + + } + + return 0; +} + +static int saa7164_proc_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, saa7164_proc_show, NULL); +} + +static const struct file_operations saa7164_proc_fops = { + .open = saa7164_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int saa7164_proc_create(void) +{ + struct proc_dir_entry *pe; + + pe = proc_create("saa7164", S_IRUGO, NULL, &saa7164_proc_fops); + if (!pe) + return -ENOMEM; + + return 0; +} +#endif + +static int saa7164_thread_function(void *data) +{ + struct saa7164_dev *dev = data; + struct tmFwInfoStruct fwinfo; + u64 last_poll_time = 0; + + dprintk(DBGLVL_THR, "thread started\n"); + + set_freezable(); + + while (1) { + msleep_interruptible(100); + if (kthread_should_stop()) + break; + try_to_freeze(); + + dprintk(DBGLVL_THR, "thread running\n"); + + /* Dump the firmware debug message to console */ + /* Polling this costs us 1-2% of the arm CPU */ + /* convert this into a respnde to interrupt 0x7a */ + saa7164_api_collect_debug(dev); + + /* Monitor CPU load every 1 second */ + if ((last_poll_time + 1000 /* ms */) < jiffies_to_msecs(jiffies)) { + saa7164_api_get_load_info(dev, &fwinfo); + last_poll_time = jiffies_to_msecs(jiffies); + } + + } + + dprintk(DBGLVL_THR, "thread exiting\n"); + return 0; +} + +static int saa7164_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct saa7164_dev *dev; + int err, i; + u32 version; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + goto fail_free; + } + + if (saa7164_dev_setup(dev) < 0) { + err = -EINVAL; + goto fail_free; + } + + /* print pci info */ + dev->pci_rev = pci_dev->revision; + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", dev->name, + pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat, + (unsigned long long)pci_resource_start(pci_dev, 0)); + + pci_set_master(pci_dev); + /* TODO */ + if (!pci_dma_supported(pci_dev, 0xffffffff)) { + printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); + err = -EIO; + goto fail_irq; + } + + err = request_irq(pci_dev->irq, saa7164_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, dev); + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name, + pci_dev->irq); + err = -EIO; + goto fail_irq; + } + + pci_set_drvdata(pci_dev, dev); + + /* Init the internal command list */ + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + dev->cmds[i].seqno = i; + dev->cmds[i].inuse = 0; + mutex_init(&dev->cmds[i].lock); + init_waitqueue_head(&dev->cmds[i].wait); + } + + /* We need a deferred interrupt handler for cmd handling */ + INIT_WORK(&dev->workcmd, saa7164_work_cmdhandler); + + /* Only load the firmware if we know the board */ + if (dev->board != SAA7164_BOARD_UNKNOWN) { + + err = saa7164_downloadfirmware(dev); + if (err < 0) { + printk(KERN_ERR + "Failed to boot firmware, no features " + "registered\n"); + goto fail_fw; + } + + saa7164_get_descriptors(dev); + saa7164_dumpregs(dev, 0); + saa7164_getcurrentfirmwareversion(dev); + saa7164_getfirmwarestatus(dev); + err = saa7164_bus_setup(dev); + if (err < 0) + printk(KERN_ERR + "Failed to setup the bus, will continue\n"); + saa7164_bus_dump(dev); + + /* Ping the running firmware via the command bus and get the + * firmware version, this checks the bus is running OK. + */ + version = 0; + if (saa7164_api_get_fw_version(dev, &version) == SAA_OK) + dprintk(1, "Bus is operating correctly using " + "version %d.%d.%d.%d (0x%x)\n", + (version & 0x0000fc00) >> 10, + (version & 0x000003e0) >> 5, + (version & 0x0000001f), + (version & 0xffff0000) >> 16, + version); + else + printk(KERN_ERR + "Failed to communicate with the firmware\n"); + + /* Bring up the I2C buses */ + saa7164_i2c_register(&dev->i2c_bus[0]); + saa7164_i2c_register(&dev->i2c_bus[1]); + saa7164_i2c_register(&dev->i2c_bus[2]); + saa7164_gpio_setup(dev); + saa7164_card_setup(dev); + + /* Parse the dynamic device configuration, find various + * media endpoints (MPEG, WMV, PS, TS) and cache their + * configuration details into the driver, so we can + * reference them later during simething_register() func, + * interrupt handlers, deferred work handlers etc. + */ + saa7164_api_enum_subdevs(dev); + + /* Begin to create the video sub-systems and register funcs */ + if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) { + if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS1]) < 0) { + printk(KERN_ERR "%s() Failed to register " + "dvb adapters on porta\n", + __func__); + } + } + + if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) { + if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS2]) < 0) { + printk(KERN_ERR"%s() Failed to register " + "dvb adapters on portb\n", + __func__); + } + } + + if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER) { + if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC1]) < 0) { + printk(KERN_ERR"%s() Failed to register " + "mpeg encoder\n", __func__); + } + } + + if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER) { + if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC2]) < 0) { + printk(KERN_ERR"%s() Failed to register " + "mpeg encoder\n", __func__); + } + } + + if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI) { + if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI1]) < 0) { + printk(KERN_ERR"%s() Failed to register " + "vbi device\n", __func__); + } + } + + if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI) { + if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI2]) < 0) { + printk(KERN_ERR"%s() Failed to register " + "vbi device\n", __func__); + } + } + saa7164_api_set_debug(dev, fw_debug); + + if (fw_debug) { + dev->kthread = kthread_run(saa7164_thread_function, dev, + "saa7164 debug"); + if (IS_ERR(dev->kthread)) { + dev->kthread = NULL; + printk(KERN_ERR "%s() Failed to create " + "debug kernel thread\n", __func__); + } + } + + } /* != BOARD_UNKNOWN */ + else + printk(KERN_ERR "%s() Unsupported board detected, " + "registering without firmware\n", __func__); + + dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug); + dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs); + +fail_fw: + return 0; + +fail_irq: + saa7164_dev_unregister(dev); +fail_free: + kfree(dev); + return err; +} + +static void saa7164_shutdown(struct saa7164_dev *dev) +{ + dprintk(1, "%s()\n", __func__); +} + +static void saa7164_finidev(struct pci_dev *pci_dev) +{ + struct saa7164_dev *dev = pci_get_drvdata(pci_dev); + + if (dev->board != SAA7164_BOARD_UNKNOWN) { + if (fw_debug && dev->kthread) { + kthread_stop(dev->kthread); + dev->kthread = NULL; + } + if (dev->firmwareloaded) + saa7164_api_set_debug(dev, 0x00); + } + + saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1], + &dev->ports[SAA7164_PORT_ENC1].irq_interval); + saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1], + &dev->ports[SAA7164_PORT_ENC1].svc_interval); + saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1], + &dev->ports[SAA7164_PORT_ENC1].irq_svc_interval); + saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1], + &dev->ports[SAA7164_PORT_ENC1].read_interval); + saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1], + &dev->ports[SAA7164_PORT_ENC1].poll_interval); + saa7164_histogram_print(&dev->ports[SAA7164_PORT_VBI1], + &dev->ports[SAA7164_PORT_VBI1].read_interval); + saa7164_histogram_print(&dev->ports[SAA7164_PORT_VBI2], + &dev->ports[SAA7164_PORT_VBI2].poll_interval); + + saa7164_shutdown(dev); + + if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) + saa7164_dvb_unregister(&dev->ports[SAA7164_PORT_TS1]); + + if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) + saa7164_dvb_unregister(&dev->ports[SAA7164_PORT_TS2]); + + if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER) + saa7164_encoder_unregister(&dev->ports[SAA7164_PORT_ENC1]); + + if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER) + saa7164_encoder_unregister(&dev->ports[SAA7164_PORT_ENC2]); + + if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI) + saa7164_vbi_unregister(&dev->ports[SAA7164_PORT_VBI1]); + + if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI) + saa7164_vbi_unregister(&dev->ports[SAA7164_PORT_VBI2]); + + saa7164_i2c_unregister(&dev->i2c_bus[0]); + saa7164_i2c_unregister(&dev->i2c_bus[1]); + saa7164_i2c_unregister(&dev->i2c_bus[2]); + + pci_disable_device(pci_dev); + + /* unregister stuff */ + free_irq(pci_dev->irq, dev); + pci_set_drvdata(pci_dev, NULL); + + mutex_lock(&devlist); + list_del(&dev->devlist); + mutex_unlock(&devlist); + + saa7164_dev_unregister(dev); + kfree(dev); +} + +static struct pci_device_id saa7164_pci_tbl[] = { + { + /* SAA7164 */ + .vendor = 0x1131, + .device = 0x7164, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, saa7164_pci_tbl); + +static struct pci_driver saa7164_pci_driver = { + .name = "saa7164", + .id_table = saa7164_pci_tbl, + .probe = saa7164_initdev, + .remove = saa7164_finidev, + /* TODO */ + .suspend = NULL, + .resume = NULL, +}; + +static int __init saa7164_init(void) +{ + printk(KERN_INFO "saa7164 driver loaded\n"); + +#ifdef CONFIG_PROC_FS + saa7164_proc_create(); +#endif + return pci_register_driver(&saa7164_pci_driver); +} + +static void __exit saa7164_fini(void) +{ +#ifdef CONFIG_PROC_FS + remove_proc_entry("saa7164", NULL); +#endif + pci_unregister_driver(&saa7164_pci_driver); +} + +module_init(saa7164_init); +module_exit(saa7164_fini); + diff --git a/drivers/media/pci/saa7164/saa7164-dvb.c b/drivers/media/pci/saa7164/saa7164-dvb.c new file mode 100644 index 00000000..5c5cc3eb --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-dvb.c @@ -0,0 +1,556 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +#include "tda10048.h" +#include "tda18271.h" +#include "s5h1411.h" + +#define DRIVER_NAME "saa7164" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* addr is in the card struct, get it from there */ +static struct tda10048_config hauppauge_hvr2200_1_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, +}; +static struct tda10048_config hauppauge_hvr2200_2_config = { + .demod_address = 0x12 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_config hauppauge_hvr22x0_tuner_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .role = TDA18271_MASTER, +}; + +static struct tda18271_config hauppauge_hvr22x0s_tuner_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .role = TDA18271_SLAVE, + .output_opt = TDA18271_OUTPUT_LT_OFF, + .rf_cal_on_startup = 1 +}; + +static struct s5h1411_config hauppauge_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .qam_if = S5H1411_IF_4000, + .vsb_if = S5H1411_IF_3250, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static int saa7164_dvb_stop_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Stopped\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_dvb_acquire_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Acquired\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_dvb_pause_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Paused\n", __func__); + ret = 0; + } + + return ret; +} + +/* Firmware is very windows centric, meaning you have to transition + * the part through AVStream / KS Windows stages, forwards or backwards. + * States are: stopped, acquired (h/w), paused, started. + */ +static int saa7164_dvb_stop_streaming(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct list_head *p, *q; + int ret; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + ret = saa7164_dvb_pause_port(port); + ret = saa7164_dvb_acquire_port(port); + ret = saa7164_dvb_stop_port(port); + + /* Mark the hardware buffers as free */ + mutex_lock(&port->dmaqueue_lock); + list_for_each_safe(p, q, &port->dmaqueue.list) { + buf = list_entry(p, struct saa7164_buffer, list); + buf->flags = SAA7164_BUFFER_FREE; + } + mutex_unlock(&port->dmaqueue_lock); + + return ret; +} + +static int saa7164_dvb_start_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret = 0, result; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + saa7164_buffer_cfg_port(port); + + /* Acquire the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_DVB, "%s() Acquired\n", __func__); + + /* Pause the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_DVB, "%s() Paused\n", __func__); + + /* Start the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + } else + dprintk(DBGLVL_DVB, "%s() Running\n", __func__); + +out: + return ret; +} + +static int saa7164_dvb_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct saa7164_port *port = (struct saa7164_port *) demux->priv; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + int ret = 0; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + if (!demux->dmx.frontend) + return -EINVAL; + + if (dvb) { + mutex_lock(&dvb->lock); + if (dvb->feeding++ == 0) { + /* Start transport */ + ret = saa7164_dvb_start_port(port); + } + mutex_unlock(&dvb->lock); + dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n", + __func__, port->nr, dvb->feeding); + } + + return ret; +} + +static int saa7164_dvb_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct saa7164_port *port = (struct saa7164_port *) demux->priv; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + int ret = 0; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + if (dvb) { + mutex_lock(&dvb->lock); + if (--dvb->feeding == 0) { + /* Stop transport */ + ret = saa7164_dvb_stop_streaming(port); + } + mutex_unlock(&dvb->lock); + dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n", + __func__, port->nr, dvb->feeding); + } + + return ret; +} + +static int dvb_register(struct saa7164_port *port) +{ + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + int result, i; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + if (port->type != SAA7164_MPEG_DVB) + BUG(); + + /* Sanity check that the PCI configuration space is active */ + if (port->hwcfg.BARLocation == 0) { + result = -ENOMEM; + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d), NO PCI configuration\n", + DRIVER_NAME, result); + goto fail_adapter; + } + + /* Init and establish defaults */ + port->hw_streamingparams.bitspersample = 8; + port->hw_streamingparams.samplesperline = 188; + port->hw_streamingparams.numberoflines = + (SAA7164_TS_NUMBER_OF_LINES * 188) / 188; + + port->hw_streamingparams.pitch = 188; + port->hw_streamingparams.linethreshold = 0; + port->hw_streamingparams.pagetablelistvirt = NULL; + port->hw_streamingparams.pagetablelistphys = NULL; + port->hw_streamingparams.numpagetables = 2 + + ((SAA7164_TS_NUMBER_OF_LINES * 188) / PAGE_SIZE); + + port->hw_streamingparams.numpagetableentries = port->hwcfg.buffercount; + + /* Allocate the PCI resources */ + for (i = 0; i < port->hwcfg.buffercount; i++) { + buf = saa7164_buffer_alloc(port, + port->hw_streamingparams.numberoflines * + port->hw_streamingparams.pitch); + + if (!buf) { + result = -ENOMEM; + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d), unable to allocate buffers\n", + DRIVER_NAME, result); + goto fail_adapter; + } + + mutex_lock(&port->dmaqueue_lock); + list_add_tail(&buf->list, &port->dmaqueue.list); + mutex_unlock(&port->dmaqueue_lock); + } + + /* register adapter */ + result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE, + &dev->pci->dev, adapter_nr); + if (result < 0) { + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d)\n", DRIVER_NAME, result); + goto fail_adapter; + } + dvb->adapter.priv = port; + + /* register frontend */ + result = dvb_register_frontend(&dvb->adapter, dvb->frontend); + if (result < 0) { + printk(KERN_ERR "%s: dvb_register_frontend failed " + "(errno = %d)\n", DRIVER_NAME, result); + goto fail_frontend; + } + + /* register demux stuff */ + dvb->demux.dmx.capabilities = + DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + dvb->demux.priv = port; + dvb->demux.filternum = 256; + dvb->demux.feednum = 256; + dvb->demux.start_feed = saa7164_dvb_start_feed; + dvb->demux.stop_feed = saa7164_dvb_stop_feed; + result = dvb_dmx_init(&dvb->demux); + if (result < 0) { + printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_dmx; + } + + dvb->dmxdev.filternum = 256; + dvb->dmxdev.demux = &dvb->demux.dmx; + dvb->dmxdev.capabilities = 0; + result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + if (result < 0) { + printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_dmxdev; + } + + dvb->fe_hw.source = DMX_FRONTEND_0; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_ERR "%s: add_frontend failed " + "(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result); + goto fail_fe_hw; + } + + dvb->fe_mem.source = DMX_MEMORY_FE; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); + if (result < 0) { + printk(KERN_ERR "%s: add_frontend failed " + "(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result); + goto fail_fe_mem; + } + + result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_fe_conn; + } + + /* register network adapter */ + dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); + return 0; + +fail_fe_conn: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); +fail_fe_mem: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); +fail_fe_hw: + dvb_dmxdev_release(&dvb->dmxdev); +fail_dmxdev: + dvb_dmx_release(&dvb->demux); +fail_dmx: + dvb_unregister_frontend(dvb->frontend); +fail_frontend: + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); +fail_adapter: + return result; +} + +int saa7164_dvb_unregister(struct saa7164_port *port) +{ + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *b; + struct list_head *c, *n; + + dprintk(DBGLVL_DVB, "%s()\n", __func__); + + if (port->type != SAA7164_MPEG_DVB) + BUG(); + + /* Remove any allocated buffers */ + mutex_lock(&port->dmaqueue_lock); + list_for_each_safe(c, n, &port->dmaqueue.list) { + b = list_entry(c, struct saa7164_buffer, list); + list_del(c); + saa7164_buffer_dealloc(b); + } + mutex_unlock(&port->dmaqueue_lock); + + if (dvb->frontend == NULL) + return 0; + + dvb_net_release(&dvb->net); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(&dvb->demux); + dvb_unregister_frontend(dvb->frontend); + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); + return 0; +} + +/* All the DVB attach calls go here, this function get's modified + * for each new card. + */ +int saa7164_dvb_register(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_i2c *i2c_bus = NULL; + int ret; + + dprintk(DBGLVL_DVB, "%s()\n", __func__); + + /* init frontend */ + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_5: + i2c_bus = &dev->i2c_bus[port->nr + 1]; + switch (port->nr) { + case 0: + port->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr2200_1_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + /* TODO: addr is in the card struct */ + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0_tuner_config); + } + + break; + case 1: + port->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr2200_2_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + /* TODO: addr is in the card struct */ + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0s_tuner_config); + } + + break; + } + break; + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: + i2c_bus = &dev->i2c_bus[port->nr + 1]; + + port->dvb.frontend = dvb_attach(s5h1411_attach, + &hauppauge_s5h1411_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + if (port->nr == 0) { + /* Master TDA18271 */ + /* TODO: addr is in the card struct */ + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0_tuner_config); + } else { + /* Slave TDA18271 */ + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0s_tuner_config); + } + } + + break; + default: + printk(KERN_ERR "%s: The frontend isn't supported\n", + dev->name); + break; + } + if (NULL == dvb->frontend) { + printk(KERN_ERR "%s() Frontend initialization failed\n", + __func__); + return -1; + } + + /* register everything */ + ret = dvb_register(port); + if (ret < 0) { + if (dvb->frontend->ops.release) + dvb->frontend->ops.release(dvb->frontend); + return ret; + } + + return 0; +} + diff --git a/drivers/media/pci/saa7164/saa7164-encoder.c b/drivers/media/pci/saa7164/saa7164-encoder.c new file mode 100644 index 00000000..0b74fb23 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-encoder.c @@ -0,0 +1,1503 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +#define ENCODER_MAX_BITRATE 6500000 +#define ENCODER_MIN_BITRATE 1000000 +#define ENCODER_DEF_BITRATE 5000000 + +static struct saa7164_tvnorm saa7164_tvnorms[] = { + { + .name = "NTSC-M", + .id = V4L2_STD_NTSC_M, + }, { + .name = "NTSC-JP", + .id = V4L2_STD_NTSC_M_JP, + } +}; + +static const u32 saa7164_v4l2_ctrls[] = { + V4L2_CID_BRIGHTNESS, + V4L2_CID_CONTRAST, + V4L2_CID_SATURATION, + V4L2_CID_HUE, + V4L2_CID_AUDIO_VOLUME, + V4L2_CID_SHARPNESS, + V4L2_CID_MPEG_STREAM_TYPE, + V4L2_CID_MPEG_VIDEO_ASPECT, + V4L2_CID_MPEG_VIDEO_B_FRAMES, + V4L2_CID_MPEG_VIDEO_GOP_SIZE, + V4L2_CID_MPEG_AUDIO_MUTE, + V4L2_CID_MPEG_VIDEO_BITRATE_MODE, + V4L2_CID_MPEG_VIDEO_BITRATE, + V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, + 0 +}; + +/* Take the encoder configuration form the port struct and + * flush it to the hardware. + */ +static void saa7164_encoder_configure(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + port->encoder_params.width = port->width; + port->encoder_params.height = port->height; + port->encoder_params.is_50hz = + (port->encodernorm.id & V4L2_STD_625_50) != 0; + + /* Set up the DIF (enable it) for analog mode by default */ + saa7164_api_initialize_dif(port); + + /* Configure the correct video standard */ + saa7164_api_configure_dif(port, port->encodernorm.id); + + /* Ensure the audio decoder is correct configured */ + saa7164_api_set_audio_std(port); +} + +static int saa7164_encoder_buffers_dealloc(struct saa7164_port *port) +{ + struct list_head *c, *n, *p, *q, *l, *v; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct saa7164_user_buffer *ubuf; + + /* Remove any allocated buffers */ + mutex_lock(&port->dmaqueue_lock); + + dprintk(DBGLVL_ENC, "%s(port=%d) dmaqueue\n", __func__, port->nr); + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + list_del(c); + saa7164_buffer_dealloc(buf); + } + + dprintk(DBGLVL_ENC, "%s(port=%d) used\n", __func__, port->nr); + list_for_each_safe(p, q, &port->list_buf_used.list) { + ubuf = list_entry(p, struct saa7164_user_buffer, list); + list_del(p); + saa7164_buffer_dealloc_user(ubuf); + } + + dprintk(DBGLVL_ENC, "%s(port=%d) free\n", __func__, port->nr); + list_for_each_safe(l, v, &port->list_buf_free.list) { + ubuf = list_entry(l, struct saa7164_user_buffer, list); + list_del(l); + saa7164_buffer_dealloc_user(ubuf); + } + + mutex_unlock(&port->dmaqueue_lock); + dprintk(DBGLVL_ENC, "%s(port=%d) done\n", __func__, port->nr); + + return 0; +} + +/* Dynamic buffer switch at encoder start time */ +static int saa7164_encoder_buffers_alloc(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct saa7164_user_buffer *ubuf; + struct tmHWStreamParameters *params = &port->hw_streamingparams; + int result = -ENODEV, i; + int len = 0; + + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + if (port->encoder_params.stream_type == + V4L2_MPEG_STREAM_TYPE_MPEG2_PS) { + dprintk(DBGLVL_ENC, + "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_PS\n", + __func__); + params->samplesperline = 128; + params->numberoflines = 256; + params->pitch = 128; + params->numpagetables = 2 + + ((SAA7164_PS_NUMBER_OF_LINES * 128) / PAGE_SIZE); + } else + if (port->encoder_params.stream_type == + V4L2_MPEG_STREAM_TYPE_MPEG2_TS) { + dprintk(DBGLVL_ENC, + "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_TS\n", + __func__); + params->samplesperline = 188; + params->numberoflines = 312; + params->pitch = 188; + params->numpagetables = 2 + + ((SAA7164_TS_NUMBER_OF_LINES * 188) / PAGE_SIZE); + } else + BUG(); + + /* Init and establish defaults */ + params->bitspersample = 8; + params->linethreshold = 0; + params->pagetablelistvirt = NULL; + params->pagetablelistphys = NULL; + params->numpagetableentries = port->hwcfg.buffercount; + + /* Allocate the PCI resources, buffers (hard) */ + for (i = 0; i < port->hwcfg.buffercount; i++) { + buf = saa7164_buffer_alloc(port, + params->numberoflines * + params->pitch); + + if (!buf) { + printk(KERN_ERR "%s() failed " + "(errno = %d), unable to allocate buffer\n", + __func__, result); + result = -ENOMEM; + goto failed; + } else { + + mutex_lock(&port->dmaqueue_lock); + list_add_tail(&buf->list, &port->dmaqueue.list); + mutex_unlock(&port->dmaqueue_lock); + + } + } + + /* Allocate some kernel buffers for copying + * to userpsace. + */ + len = params->numberoflines * params->pitch; + + if (encoder_buffers < 16) + encoder_buffers = 16; + if (encoder_buffers > 512) + encoder_buffers = 512; + + for (i = 0; i < encoder_buffers; i++) { + + ubuf = saa7164_buffer_alloc_user(dev, len); + if (ubuf) { + mutex_lock(&port->dmaqueue_lock); + list_add_tail(&ubuf->list, &port->list_buf_free.list); + mutex_unlock(&port->dmaqueue_lock); + } + + } + + result = 0; + +failed: + return result; +} + +static int saa7164_encoder_initialize(struct saa7164_port *port) +{ + saa7164_encoder_configure(port); + return 0; +} + +/* -- V4L2 --------------------------------------------------------- */ +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + unsigned int i; + + dprintk(DBGLVL_ENC, "%s(id=0x%x)\n", __func__, (u32)id); + + for (i = 0; i < ARRAY_SIZE(saa7164_tvnorms); i++) { + if (id & saa7164_tvnorms[i].id) + break; + } + if (i == ARRAY_SIZE(saa7164_tvnorms)) + return -EINVAL; + + port->encodernorm = saa7164_tvnorms[i]; + + /* Update the audio decoder while is not running in + * auto detect mode. + */ + saa7164_api_set_audio_std(port); + + dprintk(DBGLVL_ENC, "%s(id=0x%x) OK\n", __func__, (u32)id); + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + int n; + + char *inputs[] = { "tuner", "composite", "svideo", "aux", + "composite 2", "svideo 2", "aux 2" }; + + if (i->index >= 7) + return -EINVAL; + + strcpy(i->name, inputs[i->index]); + + if (i->index == 0) + i->type = V4L2_INPUT_TYPE_TUNER; + else + i->type = V4L2_INPUT_TYPE_CAMERA; + + for (n = 0; n < ARRAY_SIZE(saa7164_tvnorms); n++) + i->std |= saa7164_tvnorms[n].id; + + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + if (saa7164_api_get_videomux(port) != SAA_OK) + return -EIO; + + *i = (port->mux_input - 1); + + dprintk(DBGLVL_ENC, "%s() input=%d\n", __func__, *i); + + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_ENC, "%s() input=%d\n", __func__, i); + + if (i >= 7) + return -EINVAL; + + port->mux_input = i + 1; + + if (saa7164_api_set_videomux(port) != SAA_OK) + return -EIO; + + return 0; +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + if (0 != t->index) + return -EINVAL; + + strcpy(t->name, "tuner"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO; + + dprintk(DBGLVL_ENC, "VIDIOC_G_TUNER: tuner type %d\n", t->type); + + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + /* Update the A/V core */ + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = port->freq; + + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + struct saa7164_port *tsport; + struct dvb_frontend *fe; + + /* TODO: Pull this for the std */ + struct analog_parameters params = { + .mode = V4L2_TUNER_ANALOG_TV, + .audmode = V4L2_TUNER_MODE_STEREO, + .std = port->encodernorm.id, + .frequency = f->frequency + }; + + /* Stop the encoder */ + dprintk(DBGLVL_ENC, "%s() frequency=%d tuner=%d\n", __func__, + f->frequency, f->tuner); + + if (f->tuner != 0) + return -EINVAL; + + if (f->type != V4L2_TUNER_ANALOG_TV) + return -EINVAL; + + port->freq = f->frequency; + + /* Update the hardware */ + if (port->nr == SAA7164_PORT_ENC1) + tsport = &dev->ports[SAA7164_PORT_TS1]; + else + if (port->nr == SAA7164_PORT_ENC2) + tsport = &dev->ports[SAA7164_PORT_TS2]; + else + BUG(); + + fe = tsport->dvb.frontend; + + if (fe && fe->ops.tuner_ops.set_analog_params) + fe->ops.tuner_ops.set_analog_params(fe, ¶ms); + else + printk(KERN_ERR "%s() No analog tuner, aborting\n", __func__); + + saa7164_encoder_initialize(port); + + return 0; +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_ENC, "%s(id=%d, value=%d)\n", __func__, + ctl->id, ctl->value); + + switch (ctl->id) { + case V4L2_CID_BRIGHTNESS: + ctl->value = port->ctl_brightness; + break; + case V4L2_CID_CONTRAST: + ctl->value = port->ctl_contrast; + break; + case V4L2_CID_SATURATION: + ctl->value = port->ctl_saturation; + break; + case V4L2_CID_HUE: + ctl->value = port->ctl_hue; + break; + case V4L2_CID_SHARPNESS: + ctl->value = port->ctl_sharpness; + break; + case V4L2_CID_AUDIO_VOLUME: + ctl->value = port->ctl_volume; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + int ret = 0; + + dprintk(DBGLVL_ENC, "%s(id=%d, value=%d)\n", __func__, + ctl->id, ctl->value); + + switch (ctl->id) { + case V4L2_CID_BRIGHTNESS: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_brightness = ctl->value; + saa7164_api_set_usercontrol(port, + PU_BRIGHTNESS_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_CONTRAST: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_contrast = ctl->value; + saa7164_api_set_usercontrol(port, PU_CONTRAST_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_SATURATION: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_saturation = ctl->value; + saa7164_api_set_usercontrol(port, + PU_SATURATION_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_HUE: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_hue = ctl->value; + saa7164_api_set_usercontrol(port, PU_HUE_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_SHARPNESS: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_sharpness = ctl->value; + saa7164_api_set_usercontrol(port, PU_SHARPNESS_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_AUDIO_VOLUME: + if ((ctl->value >= -83) && (ctl->value <= 24)) { + port->ctl_volume = ctl->value; + saa7164_api_set_audio_volume(port, port->ctl_volume); + } else + ret = -EINVAL; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int saa7164_get_ctrl(struct saa7164_port *port, + struct v4l2_ext_control *ctrl) +{ + struct saa7164_encoder_params *params = &port->encoder_params; + + switch (ctrl->id) { + case V4L2_CID_MPEG_VIDEO_BITRATE: + ctrl->value = params->bitrate; + break; + case V4L2_CID_MPEG_STREAM_TYPE: + ctrl->value = params->stream_type; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + ctrl->value = params->ctl_mute; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + ctrl->value = params->ctl_aspect; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + ctrl->value = params->bitrate_mode; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + ctrl->value = params->refdist; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + ctrl->value = params->bitrate_peak; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + ctrl->value = params->gop_size; + break; + default: + return -EINVAL; + } + return 0; +} + +static int vidioc_g_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + int i, err = 0; + + if (ctrls->ctrl_class == V4L2_CTRL_CLASS_MPEG) { + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + + err = saa7164_get_ctrl(port, ctrl); + if (err) { + ctrls->error_idx = i; + break; + } + } + return err; + + } + + return -EINVAL; +} + +static int saa7164_try_ctrl(struct v4l2_ext_control *ctrl, int ac3) +{ + int ret = -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_MPEG_VIDEO_BITRATE: + if ((ctrl->value >= ENCODER_MIN_BITRATE) && + (ctrl->value <= ENCODER_MAX_BITRATE)) + ret = 0; + break; + case V4L2_CID_MPEG_STREAM_TYPE: + if ((ctrl->value == V4L2_MPEG_STREAM_TYPE_MPEG2_PS) || + (ctrl->value == V4L2_MPEG_STREAM_TYPE_MPEG2_TS)) + ret = 0; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + if ((ctrl->value >= 0) && + (ctrl->value <= 1)) + ret = 0; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + if ((ctrl->value >= V4L2_MPEG_VIDEO_ASPECT_1x1) && + (ctrl->value <= V4L2_MPEG_VIDEO_ASPECT_221x100)) + ret = 0; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + if ((ctrl->value >= 0) && + (ctrl->value <= 255)) + ret = 0; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + if ((ctrl->value == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) || + (ctrl->value == V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)) + ret = 0; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + if ((ctrl->value >= 1) && + (ctrl->value <= 3)) + ret = 0; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + if ((ctrl->value >= ENCODER_MIN_BITRATE) && + (ctrl->value <= ENCODER_MAX_BITRATE)) + ret = 0; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int vidioc_try_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + int i, err = 0; + + if (ctrls->ctrl_class == V4L2_CTRL_CLASS_MPEG) { + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + + err = saa7164_try_ctrl(ctrl, 0); + if (err) { + ctrls->error_idx = i; + break; + } + } + return err; + } + + return -EINVAL; +} + +static int saa7164_set_ctrl(struct saa7164_port *port, + struct v4l2_ext_control *ctrl) +{ + struct saa7164_encoder_params *params = &port->encoder_params; + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_MPEG_VIDEO_BITRATE: + params->bitrate = ctrl->value; + break; + case V4L2_CID_MPEG_STREAM_TYPE: + params->stream_type = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + params->ctl_mute = ctrl->value; + ret = saa7164_api_audio_mute(port, params->ctl_mute); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, + ret); + ret = -EIO; + } + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + params->ctl_aspect = ctrl->value; + ret = saa7164_api_set_aspect_ratio(port); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, + ret); + ret = -EIO; + } + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + params->bitrate_mode = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + params->refdist = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + params->bitrate_peak = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + params->gop_size = ctrl->value; + break; + default: + return -EINVAL; + } + + /* TODO: Update the hardware */ + + return ret; +} + +static int vidioc_s_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + int i, err = 0; + + if (ctrls->ctrl_class == V4L2_CTRL_CLASS_MPEG) { + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + + err = saa7164_try_ctrl(ctrl, 0); + if (err) { + ctrls->error_idx = i; + break; + } + err = saa7164_set_ctrl(port, ctrl); + if (err) { + ctrls->error_idx = i; + break; + } + } + return err; + + } + + return -EINVAL; +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + strcpy(cap->driver, dev->name); + strlcpy(cap->card, saa7164_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + 0; + + cap->capabilities |= V4L2_CAP_TUNER; + cap->version = 0; + + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index != 0) + return -EINVAL; + + strlcpy(f->description, "MPEG", sizeof(f->description)); + f->pixelformat = V4L2_PIX_FMT_MPEG; + + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + port->ts_packet_size * port->ts_packet_count; + f->fmt.pix.colorspace = 0; + f->fmt.pix.width = port->width; + f->fmt.pix.height = port->height; + + dprintk(DBGLVL_ENC, "VIDIOC_G_FMT: w: %d, h: %d\n", + port->width, port->height); + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + port->ts_packet_size * port->ts_packet_count; + f->fmt.pix.colorspace = 0; + dprintk(DBGLVL_ENC, "VIDIOC_TRY_FMT: w: %d, h: %d\n", + port->width, port->height); + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + port->ts_packet_size * port->ts_packet_count; + f->fmt.pix.colorspace = 0; + + dprintk(DBGLVL_ENC, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n", + f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field); + + return 0; +} + +static int fill_queryctrl(struct saa7164_encoder_params *params, + struct v4l2_queryctrl *c) +{ + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(c, 0x0, 0xff, 1, 127); + case V4L2_CID_CONTRAST: + return v4l2_ctrl_query_fill(c, 0x0, 0xff, 1, 66); + case V4L2_CID_SATURATION: + return v4l2_ctrl_query_fill(c, 0x0, 0xff, 1, 62); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(c, 0x0, 0xff, 1, 128); + case V4L2_CID_SHARPNESS: + return v4l2_ctrl_query_fill(c, 0x0, 0x0f, 1, 8); + case V4L2_CID_MPEG_AUDIO_MUTE: + return v4l2_ctrl_query_fill(c, 0x0, 0x01, 1, 0); + case V4L2_CID_AUDIO_VOLUME: + return v4l2_ctrl_query_fill(c, -83, 24, 1, 20); + case V4L2_CID_MPEG_VIDEO_BITRATE: + return v4l2_ctrl_query_fill(c, + ENCODER_MIN_BITRATE, ENCODER_MAX_BITRATE, + 100000, ENCODER_DEF_BITRATE); + case V4L2_CID_MPEG_STREAM_TYPE: + return v4l2_ctrl_query_fill(c, + V4L2_MPEG_STREAM_TYPE_MPEG2_PS, + V4L2_MPEG_STREAM_TYPE_MPEG2_TS, + 1, V4L2_MPEG_STREAM_TYPE_MPEG2_PS); + case V4L2_CID_MPEG_VIDEO_ASPECT: + return v4l2_ctrl_query_fill(c, + V4L2_MPEG_VIDEO_ASPECT_1x1, + V4L2_MPEG_VIDEO_ASPECT_221x100, + 1, V4L2_MPEG_VIDEO_ASPECT_4x3); + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + return v4l2_ctrl_query_fill(c, 1, 255, 1, 15); + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + return v4l2_ctrl_query_fill(c, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, + 1, V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + return v4l2_ctrl_query_fill(c, + 1, 3, 1, 1); + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + return v4l2_ctrl_query_fill(c, + ENCODER_MIN_BITRATE, ENCODER_MAX_BITRATE, + 100000, ENCODER_DEF_BITRATE); + default: + return -EINVAL; + } +} + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + struct saa7164_encoder_fh *fh = priv; + struct saa7164_port *port = fh->port; + int i, next; + u32 id = c->id; + + memset(c, 0, sizeof(*c)); + + next = !!(id & V4L2_CTRL_FLAG_NEXT_CTRL); + c->id = id & ~V4L2_CTRL_FLAG_NEXT_CTRL; + + for (i = 0; i < ARRAY_SIZE(saa7164_v4l2_ctrls); i++) { + if (next) { + if (c->id < saa7164_v4l2_ctrls[i]) + c->id = saa7164_v4l2_ctrls[i]; + else + continue; + } + + if (c->id == saa7164_v4l2_ctrls[i]) + return fill_queryctrl(&port->encoder_params, c); + + if (c->id < saa7164_v4l2_ctrls[i]) + break; + } + + return -EINVAL; +} + +static int saa7164_encoder_stop_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_ENC, "%s() Stopped\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_encoder_acquire_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_ENC, "%s() Acquired\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_encoder_pause_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_ENC, "%s() Paused\n", __func__); + ret = 0; + } + + return ret; +} + +/* Firmware is very windows centric, meaning you have to transition + * the part through AVStream / KS Windows stages, forwards or backwards. + * States are: stopped, acquired (h/w), paused, started. + * We have to leave here will all of the soft buffers on the free list, + * else the cfg_post() func won't have soft buffers to correctly configure. + */ +static int saa7164_encoder_stop_streaming(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct saa7164_user_buffer *ubuf; + struct list_head *c, *n; + int ret; + + dprintk(DBGLVL_ENC, "%s(port=%d)\n", __func__, port->nr); + + ret = saa7164_encoder_pause_port(port); + ret = saa7164_encoder_acquire_port(port); + ret = saa7164_encoder_stop_port(port); + + dprintk(DBGLVL_ENC, "%s(port=%d) Hardware stopped\n", __func__, + port->nr); + + /* Reset the state of any allocated buffer resources */ + mutex_lock(&port->dmaqueue_lock); + + /* Reset the hard and soft buffer state */ + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + buf->flags = SAA7164_BUFFER_FREE; + buf->pos = 0; + } + + list_for_each_safe(c, n, &port->list_buf_used.list) { + ubuf = list_entry(c, struct saa7164_user_buffer, list); + ubuf->pos = 0; + list_move_tail(&ubuf->list, &port->list_buf_free.list); + } + + mutex_unlock(&port->dmaqueue_lock); + + /* Free any allocated resources */ + saa7164_encoder_buffers_dealloc(port); + + dprintk(DBGLVL_ENC, "%s(port=%d) Released\n", __func__, port->nr); + + return ret; +} + +static int saa7164_encoder_start_streaming(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int result, ret = 0; + + dprintk(DBGLVL_ENC, "%s(port=%d)\n", __func__, port->nr); + + port->done_first_interrupt = 0; + + /* allocate all of the PCIe DMA buffer resources on the fly, + * allowing switching between TS and PS payloads without + * requiring a complete driver reload. + */ + saa7164_encoder_buffers_alloc(port); + + /* Configure the encoder with any cache values */ + saa7164_api_set_encoder(port); + saa7164_api_get_encoder(port); + + /* Place the empty buffers on the hardware */ + saa7164_buffer_cfg_port(port); + + /* Acquire the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_ENC, "%s() Acquired\n", __func__); + + /* Pause the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_ENC, "%s() Paused\n", __func__); + + /* Start the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + } else + dprintk(DBGLVL_ENC, "%s() Running\n", __func__); + +out: + return ret; +} + +static int fops_open(struct file *file) +{ + struct saa7164_dev *dev; + struct saa7164_port *port; + struct saa7164_encoder_fh *fh; + + port = (struct saa7164_port *)video_get_drvdata(video_devdata(file)); + if (!port) + return -ENODEV; + + dev = port->dev; + + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + + file->private_data = fh; + fh->port = port; + + return 0; +} + +static int fops_release(struct file *file) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + /* Shut device down on last close */ + if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) { + if (atomic_dec_return(&port->v4l_reader_count) == 0) { + /* stop mpeg capture then cancel buffers */ + saa7164_encoder_stop_streaming(port); + } + } + + file->private_data = NULL; + kfree(fh); + + return 0; +} + +static struct +saa7164_user_buffer *saa7164_enc_next_buf(struct saa7164_port *port) +{ + struct saa7164_user_buffer *ubuf = NULL; + struct saa7164_dev *dev = port->dev; + u32 crc; + + mutex_lock(&port->dmaqueue_lock); + if (!list_empty(&port->list_buf_used.list)) { + ubuf = list_first_entry(&port->list_buf_used.list, + struct saa7164_user_buffer, list); + + if (crc_checking) { + crc = crc32(0, ubuf->data, ubuf->actual_size); + if (crc != ubuf->crc) { + printk(KERN_ERR + "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", + __func__, + ubuf, ubuf->crc, crc); + } + } + + } + mutex_unlock(&port->dmaqueue_lock); + + dprintk(DBGLVL_ENC, "%s() returns %p\n", __func__, ubuf); + + return ubuf; +} + +static ssize_t fops_read(struct file *file, char __user *buffer, + size_t count, loff_t *pos) +{ + struct saa7164_encoder_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_user_buffer *ubuf = NULL; + struct saa7164_dev *dev = port->dev; + int ret = 0; + int rem, cnt; + u8 *p; + + port->last_read_msecs_diff = port->last_read_msecs; + port->last_read_msecs = jiffies_to_msecs(jiffies); + port->last_read_msecs_diff = port->last_read_msecs - + port->last_read_msecs_diff; + + saa7164_histogram_update(&port->read_interval, + port->last_read_msecs_diff); + + if (*pos) { + printk(KERN_ERR "%s() ESPIPE\n", __func__); + return -ESPIPE; + } + + if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { + if (atomic_inc_return(&port->v4l_reader_count) == 1) { + + if (saa7164_encoder_initialize(port) < 0) { + printk(KERN_ERR "%s() EINVAL\n", __func__); + return -EINVAL; + } + + saa7164_encoder_start_streaming(port); + msleep(200); + } + } + + /* blocking wait for buffer */ + if ((file->f_flags & O_NONBLOCK) == 0) { + if (wait_event_interruptible(port->wait_read, + saa7164_enc_next_buf(port))) { + printk(KERN_ERR "%s() ERESTARTSYS\n", __func__); + return -ERESTARTSYS; + } + } + + /* Pull the first buffer from the used list */ + ubuf = saa7164_enc_next_buf(port); + + while ((count > 0) && ubuf) { + + /* set remaining bytes to copy */ + rem = ubuf->actual_size - ubuf->pos; + cnt = rem > count ? count : rem; + + p = ubuf->data + ubuf->pos; + + dprintk(DBGLVL_ENC, + "%s() count=%d cnt=%d rem=%d buf=%p buf->pos=%d\n", + __func__, (int)count, cnt, rem, ubuf, ubuf->pos); + + if (copy_to_user(buffer, p, cnt)) { + printk(KERN_ERR "%s() copy_to_user failed\n", __func__); + if (!ret) { + printk(KERN_ERR "%s() EFAULT\n", __func__); + ret = -EFAULT; + } + goto err; + } + + ubuf->pos += cnt; + count -= cnt; + buffer += cnt; + ret += cnt; + + if (ubuf->pos > ubuf->actual_size) + printk(KERN_ERR "read() pos > actual, huh?\n"); + + if (ubuf->pos == ubuf->actual_size) { + + /* finished with current buffer, take next buffer */ + + /* Requeue the buffer on the free list */ + ubuf->pos = 0; + + mutex_lock(&port->dmaqueue_lock); + list_move_tail(&ubuf->list, &port->list_buf_free.list); + mutex_unlock(&port->dmaqueue_lock); + + /* Dequeue next */ + if ((file->f_flags & O_NONBLOCK) == 0) { + if (wait_event_interruptible(port->wait_read, + saa7164_enc_next_buf(port))) { + break; + } + } + ubuf = saa7164_enc_next_buf(port); + } + } +err: + if (!ret && !ubuf) + ret = -EAGAIN; + + return ret; +} + +static unsigned int fops_poll(struct file *file, poll_table *wait) +{ + struct saa7164_encoder_fh *fh = + (struct saa7164_encoder_fh *)file->private_data; + struct saa7164_port *port = fh->port; + unsigned int mask = 0; + + port->last_poll_msecs_diff = port->last_poll_msecs; + port->last_poll_msecs = jiffies_to_msecs(jiffies); + port->last_poll_msecs_diff = port->last_poll_msecs - + port->last_poll_msecs_diff; + + saa7164_histogram_update(&port->poll_interval, + port->last_poll_msecs_diff); + + if (!video_is_registered(port->v4l_device)) + return -EIO; + + if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { + if (atomic_inc_return(&port->v4l_reader_count) == 1) { + if (saa7164_encoder_initialize(port) < 0) + return -EINVAL; + saa7164_encoder_start_streaming(port); + msleep(200); + } + } + + /* blocking wait for buffer */ + if ((file->f_flags & O_NONBLOCK) == 0) { + if (wait_event_interruptible(port->wait_read, + saa7164_enc_next_buf(port))) { + return -ERESTARTSYS; + } + } + + /* Pull the first buffer from the used list */ + if (!list_empty(&port->list_buf_used.list)) + mask |= POLLIN | POLLRDNORM; + + return mask; +} + +static const struct v4l2_file_operations mpeg_fops = { + .owner = THIS_MODULE, + .open = fops_open, + .release = fops_release, + .read = fops_read, + .poll = fops_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static int saa7164_g_chip_ident(struct file *file, void *fh, + struct v4l2_dbg_chip_ident *chip) +{ + struct saa7164_port *port = ((struct saa7164_encoder_fh *)fh)->port; + struct saa7164_dev *dev = port->dev; + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int saa7164_g_register(struct file *file, void *fh, + struct v4l2_dbg_register *reg) +{ + struct saa7164_port *port = ((struct saa7164_encoder_fh *)fh)->port; + struct saa7164_dev *dev = port->dev; + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + return 0; +} + +static int saa7164_s_register(struct file *file, void *fh, + const struct v4l2_dbg_register *reg) +{ + struct saa7164_port *port = ((struct saa7164_encoder_fh *)fh)->port; + struct saa7164_dev *dev = port->dev; + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + return 0; +} +#endif + +static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, + .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, + .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_chip_ident = saa7164_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = saa7164_g_register, + .vidioc_s_register = saa7164_s_register, +#endif +}; + +static struct video_device saa7164_mpeg_template = { + .name = "saa7164", + .fops = &mpeg_fops, + .ioctl_ops = &mpeg_ioctl_ops, + .minor = -1, + .tvnorms = SAA7164_NORMS, + .current_norm = V4L2_STD_NTSC_M, +}; + +static struct video_device *saa7164_encoder_alloc( + struct saa7164_port *port, + struct pci_dev *pci, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + + *vfd = *template; + snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, + type, saa7164_boards[dev->board].name); + + vfd->parent = &pci->dev; + vfd->release = video_device_release; + return vfd; +} + +int saa7164_encoder_register(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int result = -ENODEV; + + dprintk(DBGLVL_ENC, "%s()\n", __func__); + + if (port->type != SAA7164_MPEG_ENCODER) + BUG(); + + /* Sanity check that the PCI configuration space is active */ + if (port->hwcfg.BARLocation == 0) { + printk(KERN_ERR "%s() failed " + "(errno = %d), NO PCI configuration\n", + __func__, result); + result = -ENOMEM; + goto failed; + } + + /* Establish encoder defaults here */ + /* Set default TV standard */ + port->encodernorm = saa7164_tvnorms[0]; + port->width = 720; + port->mux_input = 1; /* Composite */ + port->video_format = EU_VIDEO_FORMAT_MPEG_2; + port->audio_format = 0; + port->video_resolution = 0; + port->ctl_brightness = 127; + port->ctl_contrast = 66; + port->ctl_hue = 128; + port->ctl_saturation = 62; + port->ctl_sharpness = 8; + port->encoder_params.bitrate = ENCODER_DEF_BITRATE; + port->encoder_params.bitrate_peak = ENCODER_DEF_BITRATE; + port->encoder_params.bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_CBR; + port->encoder_params.stream_type = V4L2_MPEG_STREAM_TYPE_MPEG2_PS; + port->encoder_params.ctl_mute = 0; + port->encoder_params.ctl_aspect = V4L2_MPEG_VIDEO_ASPECT_4x3; + port->encoder_params.refdist = 1; + port->encoder_params.gop_size = SAA7164_ENCODER_DEFAULT_GOP_SIZE; + + if (port->encodernorm.id & V4L2_STD_525_60) + port->height = 480; + else + port->height = 576; + + /* Allocate and register the video device node */ + port->v4l_device = saa7164_encoder_alloc(port, + dev->pci, &saa7164_mpeg_template, "mpeg"); + + if (!port->v4l_device) { + printk(KERN_INFO "%s: can't allocate mpeg device\n", + dev->name); + result = -ENOMEM; + goto failed; + } + + video_set_drvdata(port->v4l_device, port); + result = video_register_device(port->v4l_device, + VFL_TYPE_GRABBER, -1); + if (result < 0) { + printk(KERN_INFO "%s: can't register mpeg device\n", + dev->name); + /* TODO: We're going to leak here if we don't dealloc + The buffers above. The unreg function can't deal wit it. + */ + goto failed; + } + + printk(KERN_INFO "%s: registered device video%d [mpeg]\n", + dev->name, port->v4l_device->num); + + /* Configure the hardware defaults */ + saa7164_api_set_videomux(port); + saa7164_api_set_usercontrol(port, PU_BRIGHTNESS_CONTROL); + saa7164_api_set_usercontrol(port, PU_CONTRAST_CONTROL); + saa7164_api_set_usercontrol(port, PU_HUE_CONTROL); + saa7164_api_set_usercontrol(port, PU_SATURATION_CONTROL); + saa7164_api_set_usercontrol(port, PU_SHARPNESS_CONTROL); + saa7164_api_audio_mute(port, 0); + saa7164_api_set_audio_volume(port, 20); + saa7164_api_set_aspect_ratio(port); + + /* Disable audio standard detection, it's buggy */ + saa7164_api_set_audio_detection(port, 0); + + saa7164_api_set_encoder(port); + saa7164_api_get_encoder(port); + + result = 0; +failed: + return result; +} + +void saa7164_encoder_unregister(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_ENC, "%s(port=%d)\n", __func__, port->nr); + + if (port->type != SAA7164_MPEG_ENCODER) + BUG(); + + if (port->v4l_device) { + if (port->v4l_device->minor != -1) + video_unregister_device(port->v4l_device); + else + video_device_release(port->v4l_device); + + port->v4l_device = NULL; + } + + dprintk(DBGLVL_ENC, "%s(port=%d) done\n", __func__, port->nr); +} + diff --git a/drivers/media/pci/saa7164/saa7164-fw.c b/drivers/media/pci/saa7164/saa7164-fw.c new file mode 100644 index 00000000..86763203 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-fw.c @@ -0,0 +1,613 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include "saa7164.h" + +#define SAA7164_REV2_FIRMWARE "NXP7164-2010-03-10.1.fw" +#define SAA7164_REV2_FIRMWARE_SIZE 4019072 + +#define SAA7164_REV3_FIRMWARE "NXP7164-2010-03-10.1.fw" +#define SAA7164_REV3_FIRMWARE_SIZE 4019072 + +struct fw_header { + u32 firmwaresize; + u32 bslsize; + u32 reserved; + u32 version; +}; + +static int saa7164_dl_wait_ack(struct saa7164_dev *dev, u32 reg) +{ + u32 timeout = SAA_DEVICE_TIMEOUT; + while ((saa7164_readl(reg) & 0x01) == 0) { + timeout -= 10; + if (timeout == 0) { + printk(KERN_ERR "%s() timeout (no d/l ack)\n", + __func__); + return -EBUSY; + } + msleep(100); + } + + return 0; +} + +static int saa7164_dl_wait_clr(struct saa7164_dev *dev, u32 reg) +{ + u32 timeout = SAA_DEVICE_TIMEOUT; + while (saa7164_readl(reg) & 0x01) { + timeout -= 10; + if (timeout == 0) { + printk(KERN_ERR "%s() timeout (no d/l clr)\n", + __func__); + return -EBUSY; + } + msleep(100); + } + + return 0; +} + +/* TODO: move dlflags into dev-> and change to write/readl/b */ +/* TODO: Excessive levels of debug */ +static int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize, + u32 dlflags, u8 *dst, u32 dstsize) +{ + u32 reg, timeout, offset; + u8 *srcbuf = NULL; + int ret; + + u32 dlflag = dlflags; + u32 dlflag_ack = dlflag + 4; + u32 drflag = dlflag_ack + 4; + u32 drflag_ack = drflag + 4; + u32 bleflag = drflag_ack + 4; + + dprintk(DBGLVL_FW, + "%s(image=%p, size=%d, flags=0x%x, dst=%p, dstsize=0x%x)\n", + __func__, src, srcsize, dlflags, dst, dstsize); + + if ((src == NULL) || (dst == NULL)) { + ret = -EIO; + goto out; + } + + srcbuf = kzalloc(4 * 1048576, GFP_KERNEL); + if (NULL == srcbuf) { + ret = -ENOMEM; + goto out; + } + + if (srcsize > (4*1048576)) { + ret = -ENOMEM; + goto out; + } + + memcpy(srcbuf, src, srcsize); + + dprintk(DBGLVL_FW, "%s() dlflag = 0x%x\n", __func__, dlflag); + dprintk(DBGLVL_FW, "%s() dlflag_ack = 0x%x\n", __func__, dlflag_ack); + dprintk(DBGLVL_FW, "%s() drflag = 0x%x\n", __func__, drflag); + dprintk(DBGLVL_FW, "%s() drflag_ack = 0x%x\n", __func__, drflag_ack); + dprintk(DBGLVL_FW, "%s() bleflag = 0x%x\n", __func__, bleflag); + + reg = saa7164_readl(dlflag); + dprintk(DBGLVL_FW, "%s() dlflag (0x%x)= 0x%x\n", __func__, dlflag, reg); + if (reg == 1) + dprintk(DBGLVL_FW, + "%s() Download flag already set, please reboot\n", + __func__); + + /* Indicate download start */ + saa7164_writel(dlflag, 1); + ret = saa7164_dl_wait_ack(dev, dlflag_ack); + if (ret < 0) + goto out; + + /* Ack download start, then wait for wait */ + saa7164_writel(dlflag, 0); + ret = saa7164_dl_wait_clr(dev, dlflag_ack); + if (ret < 0) + goto out; + + /* Deal with the raw firmware, in the appropriate chunk size */ + for (offset = 0; srcsize > dstsize; + srcsize -= dstsize, offset += dstsize) { + + dprintk(DBGLVL_FW, "%s() memcpy %d\n", __func__, dstsize); + memcpy(dst, srcbuf + offset, dstsize); + + /* Flag the data as ready */ + saa7164_writel(drflag, 1); + ret = saa7164_dl_wait_ack(dev, drflag_ack); + if (ret < 0) + goto out; + + /* Wait for indication data was received */ + saa7164_writel(drflag, 0); + ret = saa7164_dl_wait_clr(dev, drflag_ack); + if (ret < 0) + goto out; + + } + + dprintk(DBGLVL_FW, "%s() memcpy(l) %d\n", __func__, dstsize); + /* Write last block to the device */ + memcpy(dst, srcbuf+offset, srcsize); + + /* Flag the data as ready */ + saa7164_writel(drflag, 1); + ret = saa7164_dl_wait_ack(dev, drflag_ack); + if (ret < 0) + goto out; + + saa7164_writel(drflag, 0); + timeout = 0; + while (saa7164_readl(bleflag) != SAA_DEVICE_IMAGE_BOOTING) { + if (saa7164_readl(bleflag) & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR "%s() image corrupt\n", __func__); + ret = -EBUSY; + goto out; + } + + if (saa7164_readl(bleflag) & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR "%s() device memory corrupt\n", + __func__); + ret = -EBUSY; + goto out; + } + + msleep(10); /* Checkpatch throws a < 20ms warning */ + if (timeout++ > 60) + break; + } + + printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__); + + ret = saa7164_dl_wait_clr(dev, drflag_ack); + if (ret < 0) + goto out; + + printk(KERN_INFO "%s() Image booted successfully.\n", __func__); + ret = 0; + +out: + kfree(srcbuf); + return ret; +} + +/* TODO: Excessive debug */ +/* Load the firmware. Optionally it can be in ROM or newer versions + * can be on disk, saving the expense of the ROM hardware. */ +int saa7164_downloadfirmware(struct saa7164_dev *dev) +{ + /* u32 second_timeout = 60 * SAA_DEVICE_TIMEOUT; */ + u32 tmp, filesize, version, err_flags, first_timeout, fwlength; + u32 second_timeout, updatebootloader = 1, bootloadersize = 0; + const struct firmware *fw = NULL; + struct fw_header *hdr, *boothdr = NULL, *fwhdr; + u32 bootloaderversion = 0, fwloadersize; + u8 *bootloaderoffset = NULL, *fwloaderoffset; + char *fwname; + int ret; + + dprintk(DBGLVL_FW, "%s()\n", __func__); + + if (saa7164_boards[dev->board].chiprev == SAA7164_CHIP_REV2) { + fwname = SAA7164_REV2_FIRMWARE; + fwlength = SAA7164_REV2_FIRMWARE_SIZE; + } else { + fwname = SAA7164_REV3_FIRMWARE; + fwlength = SAA7164_REV3_FIRMWARE_SIZE; + } + + version = saa7164_getcurrentfirmwareversion(dev); + + if (version == 0x00) { + + second_timeout = 100; + first_timeout = 100; + err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS); + dprintk(DBGLVL_FW, "%s() err_flags = %x\n", + __func__, err_flags); + + while (err_flags != SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() err_flags = %x\n", + __func__, err_flags); + msleep(10); /* Checkpatch throws a < 20ms warning */ + + if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR "%s() firmware corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR "%s() device memory corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_NO_IMAGE) { + printk(KERN_ERR "%s() no first image\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() no first image\n", + __func__); + break; + } + } else if (err_flags & SAA_DEVICE_IMAGE_LOADING) { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() FW load time exceeded\n", + __func__); + break; + } + } else { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() Unknown bootloader flags 0x%x\n", + __func__, err_flags); + break; + } + } + + err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS); + } /* While != Booting */ + + if (err_flags == SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() Loader 1 has loaded.\n", + __func__); + first_timeout = SAA_DEVICE_TIMEOUT; + second_timeout = 60 * SAA_DEVICE_TIMEOUT; + second_timeout = 100; + + err_flags = saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS); + dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n", + __func__, err_flags); + while (err_flags != SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n", + __func__, err_flags); + msleep(10); /* Checkpatch throws a < 20ms warning */ + + if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR + "%s() firmware corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR + "%s() device memory corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_NO_IMAGE) { + printk(KERN_ERR "%s() no first image\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() no second image\n", + __func__); + break; + } + } else if (err_flags & + SAA_DEVICE_IMAGE_LOADING) { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() FW load time exceeded\n", + __func__); + break; + } + } else { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() Unknown bootloader flags 0x%x\n", + __func__, err_flags); + break; + } + } + + err_flags = + saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS); + } /* err_flags != SAA_DEVICE_IMAGE_BOOTING */ + + dprintk(DBGLVL_FW, "%s() Loader flags 1:0x%x 2:0x%x.\n", + __func__, + saa7164_readl(SAA_BOOTLOADERERROR_FLAGS), + saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS)); + + } /* err_flags == SAA_DEVICE_IMAGE_BOOTING */ + + /* It's possible for both firmwares to have booted, + * but that doesn't mean they've finished booting yet. + */ + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && + (saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING)) { + + + dprintk(DBGLVL_FW, "%s() Loader 2 has loaded.\n", + __func__); + + first_timeout = SAA_DEVICE_TIMEOUT; + while (first_timeout) { + msleep(10); /* Checkpatch throws a < 20ms warning */ + + version = + saa7164_getcurrentfirmwareversion(dev); + if (version) { + dprintk(DBGLVL_FW, + "%s() All f/w loaded successfully\n", + __func__); + break; + } else { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() FW did not boot\n", + __func__); + break; + } + } + } + } + version = saa7164_getcurrentfirmwareversion(dev); + } /* version == 0 */ + + /* Has the firmware really booted? */ + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && + (saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && (version == 0)) { + + printk(KERN_ERR + "%s() The firmware hung, probably bad firmware\n", + __func__); + + /* Tell the second stage loader we have a deadlock */ + saa7164_writel(SAA_DEVICE_DEADLOCK_DETECTED_OFFSET, + SAA_DEVICE_DEADLOCK_DETECTED); + + saa7164_getfirmwarestatus(dev); + + return -ENOMEM; + } + + dprintk(DBGLVL_FW, "Device has Firmware Version %d.%d.%d.%d\n", + (version & 0x0000fc00) >> 10, + (version & 0x000003e0) >> 5, + (version & 0x0000001f), + (version & 0xffff0000) >> 16); + + /* Load the firmwware from the disk if required */ + if (version == 0) { + + printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n", + __func__, fwname); + + ret = request_firmware(&fw, fwname, &dev->pci->dev); + if (ret) { + printk(KERN_ERR "%s() Upload failed. " + "(file not found?)\n", __func__); + return -ENOMEM; + } + + printk(KERN_INFO "%s() firmware read %Zu bytes.\n", + __func__, fw->size); + + if (fw->size != fwlength) { + printk(KERN_ERR "xc5000: firmware incorrect size\n"); + ret = -ENOMEM; + goto out; + } + + printk(KERN_INFO "%s() firmware loaded.\n", __func__); + + hdr = (struct fw_header *)fw->data; + printk(KERN_INFO "Firmware file header part 1:\n"); + printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize); + printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize); + printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved); + printk(KERN_INFO " .Version = 0x%x\n", hdr->version); + + /* Retrieve bootloader if reqd */ + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) + /* Second bootloader in the firmware file */ + filesize = hdr->reserved * 16; + else + filesize = (hdr->firmwaresize + hdr->bslsize) * + 16 + sizeof(struct fw_header); + + printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n", + __func__, filesize); + + /* Get bootloader (if reqd) and firmware header */ + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) { + /* Second boot loader is required */ + + /* Get the loader header */ + boothdr = (struct fw_header *)(fw->data + + sizeof(struct fw_header)); + + bootloaderversion = + saa7164_readl(SAA_DEVICE_2ND_VERSION); + dprintk(DBGLVL_FW, "Onboard BootLoader:\n"); + dprintk(DBGLVL_FW, "->Flag 0x%x\n", + saa7164_readl(SAA_BOOTLOADERERROR_FLAGS)); + dprintk(DBGLVL_FW, "->Ack 0x%x\n", + saa7164_readl(SAA_DATAREADY_FLAG_ACK)); + dprintk(DBGLVL_FW, "->FW Version 0x%x\n", version); + dprintk(DBGLVL_FW, "->Loader Version 0x%x\n", + bootloaderversion); + + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + 0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK) + == 0x00) && (version == 0x00)) { + + dprintk(DBGLVL_FW, "BootLoader version in " + "rom %d.%d.%d.%d\n", + (bootloaderversion & 0x0000fc00) >> 10, + (bootloaderversion & 0x000003e0) >> 5, + (bootloaderversion & 0x0000001f), + (bootloaderversion & 0xffff0000) >> 16 + ); + dprintk(DBGLVL_FW, "BootLoader version " + "in file %d.%d.%d.%d\n", + (boothdr->version & 0x0000fc00) >> 10, + (boothdr->version & 0x000003e0) >> 5, + (boothdr->version & 0x0000001f), + (boothdr->version & 0xffff0000) >> 16 + ); + + if (bootloaderversion == boothdr->version) + updatebootloader = 0; + } + + /* Calculate offset to firmware header */ + tmp = (boothdr->firmwaresize + boothdr->bslsize) * 16 + + (sizeof(struct fw_header) + + sizeof(struct fw_header)); + + fwhdr = (struct fw_header *)(fw->data+tmp); + } else { + /* No second boot loader */ + fwhdr = hdr; + } + + dprintk(DBGLVL_FW, "Firmware version in file %d.%d.%d.%d\n", + (fwhdr->version & 0x0000fc00) >> 10, + (fwhdr->version & 0x000003e0) >> 5, + (fwhdr->version & 0x0000001f), + (fwhdr->version & 0xffff0000) >> 16 + ); + + if (version == fwhdr->version) { + /* No download, firmware already on board */ + ret = 0; + goto out; + } + + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) { + if (updatebootloader) { + /* Get ready to upload the bootloader */ + bootloadersize = (boothdr->firmwaresize + + boothdr->bslsize) * 16 + + sizeof(struct fw_header); + + bootloaderoffset = (u8 *)(fw->data + + sizeof(struct fw_header)); + + dprintk(DBGLVL_FW, "bootloader d/l starts.\n"); + printk(KERN_INFO "%s() FirmwareSize = 0x%x\n", + __func__, boothdr->firmwaresize); + printk(KERN_INFO "%s() BSLSize = 0x%x\n", + __func__, boothdr->bslsize); + printk(KERN_INFO "%s() Reserved = 0x%x\n", + __func__, boothdr->reserved); + printk(KERN_INFO "%s() Version = 0x%x\n", + __func__, boothdr->version); + ret = saa7164_downloadimage( + dev, + bootloaderoffset, + bootloadersize, + SAA_DOWNLOAD_FLAGS, + dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET, + SAA_DEVICE_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR + "bootloader d/l has failed\n"); + goto out; + } + dprintk(DBGLVL_FW, + "bootloader download complete.\n"); + + } + + printk(KERN_ERR "starting firmware download(2)\n"); + bootloadersize = (boothdr->firmwaresize + + boothdr->bslsize) * 16 + + sizeof(struct fw_header); + + bootloaderoffset = + (u8 *)(fw->data + sizeof(struct fw_header)); + + fwloaderoffset = bootloaderoffset + bootloadersize; + + /* TODO: fix this bounds overrun here with old f/ws */ + fwloadersize = (fwhdr->firmwaresize + fwhdr->bslsize) * + 16 + sizeof(struct fw_header); + + ret = saa7164_downloadimage( + dev, + fwloaderoffset, + fwloadersize, + SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET, + dev->bmmio + SAA_DEVICE_2ND_DOWNLOAD_OFFSET, + SAA_DEVICE_2ND_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR "firmware download failed\n"); + goto out; + } + printk(KERN_ERR "firmware download complete.\n"); + + } else { + + /* No bootloader update reqd, download firmware only */ + printk(KERN_ERR "starting firmware download(3)\n"); + + ret = saa7164_downloadimage( + dev, + (u8 *)fw->data, + fw->size, + SAA_DOWNLOAD_FLAGS, + dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET, + SAA_DEVICE_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR "firmware download failed\n"); + goto out; + } + printk(KERN_ERR "firmware download complete.\n"); + } + } + + dev->firmwareloaded = 1; + ret = 0; + +out: + release_firmware(fw); + return ret; +} diff --git a/drivers/media/pci/saa7164/saa7164-i2c.c b/drivers/media/pci/saa7164/saa7164-i2c.c new file mode 100644 index 00000000..4f7e3b42 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-i2c.c @@ -0,0 +1,125 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "saa7164.h" + +static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) +{ + struct saa7164_i2c *bus = i2c_adap->algo_data; + struct saa7164_dev *dev = bus->dev; + int i, retval = 0; + + dprintk(DBGLVL_I2C, "%s(num = %d)\n", __func__, num); + + for (i = 0 ; i < num; i++) { + dprintk(DBGLVL_I2C, "%s(num = %d) addr = 0x%02x len = 0x%x\n", + __func__, num, msgs[i].addr, msgs[i].len); + if (msgs[i].flags & I2C_M_RD) { + /* Unsupported - Yet*/ + printk(KERN_ERR "%s() Unsupported - Yet\n", __func__); + continue; + } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* write then read from same address */ + + retval = saa7164_api_i2c_read(bus, msgs[i].addr, + msgs[i].len, msgs[i].buf, + msgs[i+1].len, msgs[i+1].buf + ); + + i++; + + if (retval < 0) + goto err; + } else { + /* write */ + retval = saa7164_api_i2c_write(bus, msgs[i].addr, + msgs[i].len, msgs[i].buf); + } + if (retval < 0) + goto err; + } + return num; + +err: + return retval; +} + +static u32 saa7164_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm saa7164_i2c_algo_template = { + .master_xfer = i2c_xfer, + .functionality = saa7164_functionality, +}; + +/* ----------------------------------------------------------------------- */ + +static struct i2c_adapter saa7164_i2c_adap_template = { + .name = "saa7164", + .owner = THIS_MODULE, + .algo = &saa7164_i2c_algo_template, +}; + +static struct i2c_client saa7164_i2c_client_template = { + .name = "saa7164 internal", +}; + +int saa7164_i2c_register(struct saa7164_i2c *bus) +{ + struct saa7164_dev *dev = bus->dev; + + dprintk(DBGLVL_I2C, "%s(bus = %d)\n", __func__, bus->nr); + + bus->i2c_adap = saa7164_i2c_adap_template; + bus->i2c_client = saa7164_i2c_client_template; + + bus->i2c_adap.dev.parent = &dev->pci->dev; + + strlcpy(bus->i2c_adap.name, bus->dev->name, + sizeof(bus->i2c_adap.name)); + + bus->i2c_adap.algo_data = bus; + i2c_set_adapdata(&bus->i2c_adap, bus); + i2c_add_adapter(&bus->i2c_adap); + + bus->i2c_client.adapter = &bus->i2c_adap; + + if (0 != bus->i2c_rc) + printk(KERN_ERR "%s: i2c bus %d register FAILED\n", + dev->name, bus->nr); + + return bus->i2c_rc; +} + +int saa7164_i2c_unregister(struct saa7164_i2c *bus) +{ + i2c_del_adapter(&bus->i2c_adap); + return 0; +} diff --git a/drivers/media/pci/saa7164/saa7164-reg.h b/drivers/media/pci/saa7164/saa7164-reg.h new file mode 100644 index 00000000..2bbf8158 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-reg.h @@ -0,0 +1,219 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* TODO: Retest the driver with errors expressed as negatives */ + +/* Result codes */ +#define SAA_OK 0 +#define SAA_ERR_BAD_PARAMETER 0x09 +#define SAA_ERR_NO_RESOURCES 0x0c +#define SAA_ERR_NOT_SUPPORTED 0x13 +#define SAA_ERR_BUSY 0x15 +#define SAA_ERR_READ 0x17 +#define SAA_ERR_TIMEOUT 0x1f +#define SAA_ERR_OVERFLOW 0x20 +#define SAA_ERR_EMPTY 0x22 +#define SAA_ERR_NOT_STARTED 0x23 +#define SAA_ERR_ALREADY_STARTED 0x24 +#define SAA_ERR_NOT_STOPPED 0x25 +#define SAA_ERR_ALREADY_STOPPED 0x26 +#define SAA_ERR_INVALID_COMMAND 0x3e +#define SAA_ERR_NULL_PACKET 0x59 + +/* Errors and flags from the silicon */ +#define PVC_ERRORCODE_UNKNOWN 0x00 +#define PVC_ERRORCODE_INVALID_COMMAND 0x01 +#define PVC_ERRORCODE_INVALID_CONTROL 0x02 +#define PVC_ERRORCODE_INVALID_DATA 0x03 +#define PVC_ERRORCODE_TIMEOUT 0x04 +#define PVC_ERRORCODE_NAK 0x05 +#define PVC_RESPONSEFLAG_ERROR 0x01 +#define PVC_RESPONSEFLAG_OVERFLOW 0x02 +#define PVC_RESPONSEFLAG_RESET 0x04 +#define PVC_RESPONSEFLAG_INTERFACE 0x08 +#define PVC_RESPONSEFLAG_CONTINUED 0x10 +#define PVC_CMDFLAG_INTERRUPT 0x02 +#define PVC_CMDFLAG_INTERFACE 0x04 +#define PVC_CMDFLAG_SERIALIZE 0x08 +#define PVC_CMDFLAG_CONTINUE 0x10 + +/* Silicon Commands */ +#define GET_DESCRIPTORS_CONTROL 0x01 +#define GET_STRING_CONTROL 0x03 +#define GET_LANGUAGE_CONTROL 0x05 +#define SET_POWER_CONTROL 0x07 +#define GET_FW_STATUS_CONTROL 0x08 +#define GET_FW_VERSION_CONTROL 0x09 +#define SET_DEBUG_LEVEL_CONTROL 0x0B +#define GET_DEBUG_DATA_CONTROL 0x0C +#define GET_PRODUCTION_INFO_CONTROL 0x0D + +/* cmd defines */ +#define SAA_CMDFLAG_CONTINUE 0x10 +#define SAA_CMD_MAX_MSG_UNITS 256 + +/* Some defines */ +#define SAA_BUS_TIMEOUT 50 +#define SAA_DEVICE_TIMEOUT 5000 +#define SAA_DEVICE_MAXREQUESTSIZE 256 + +/* Register addresses */ +#define SAA_DEVICE_VERSION 0x30 +#define SAA_DOWNLOAD_FLAGS 0x34 +#define SAA_DOWNLOAD_FLAG 0x34 +#define SAA_DOWNLOAD_FLAG_ACK 0x38 +#define SAA_DATAREADY_FLAG 0x3C +#define SAA_DATAREADY_FLAG_ACK 0x40 + +/* Boot loader register and bit definitions */ +#define SAA_BOOTLOADERERROR_FLAGS 0x44 +#define SAA_DEVICE_IMAGE_SEARCHING 0x01 +#define SAA_DEVICE_IMAGE_LOADING 0x02 +#define SAA_DEVICE_IMAGE_BOOTING 0x03 +#define SAA_DEVICE_IMAGE_CORRUPT 0x04 +#define SAA_DEVICE_MEMORY_CORRUPT 0x08 +#define SAA_DEVICE_NO_IMAGE 0x10 + +/* Register addresses */ +#define SAA_DEVICE_2ND_VERSION 0x50 +#define SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET 0x54 + +/* Register addresses */ +#define SAA_SECONDSTAGEERROR_FLAGS 0x64 + +/* Bootloader regs and flags */ +#define SAA_DEVICE_DEADLOCK_DETECTED_OFFSET 0x6C +#define SAA_DEVICE_DEADLOCK_DETECTED 0xDEADDEAD + +/* Basic firmware status registers */ +#define SAA_DEVICE_SYSINIT_STATUS_OFFSET 0x70 +#define SAA_DEVICE_SYSINIT_STATUS 0x70 +#define SAA_DEVICE_SYSINIT_MODE 0x74 +#define SAA_DEVICE_SYSINIT_SPEC 0x78 +#define SAA_DEVICE_SYSINIT_INST 0x7C +#define SAA_DEVICE_SYSINIT_CPULOAD 0x80 +#define SAA_DEVICE_SYSINIT_REMAINHEAP 0x84 + +#define SAA_DEVICE_DOWNLOAD_OFFSET 0x1000 +#define SAA_DEVICE_BUFFERBLOCKSIZE 0x1000 + +#define SAA_DEVICE_2ND_BUFFERBLOCKSIZE 0x100000 +#define SAA_DEVICE_2ND_DOWNLOAD_OFFSET 0x200000 + +/* Descriptors */ +#define CS_INTERFACE 0x24 + +/* Descriptor subtypes */ +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define FEATURE_UNIT 0x06 +#define TUNER_UNIT 0x09 +#define ENCODER_UNIT 0x0A +#define EXTENSION_UNIT 0x0B +#define VC_TUNER_PATH 0xF0 +#define PVC_HARDWARE_DESCRIPTOR 0xF1 +#define PVC_INTERFACE_DESCRIPTOR 0xF2 +#define PVC_INFRARED_UNIT 0xF3 +#define DRM_UNIT 0xF4 +#define GENERAL_REQUEST 0xF5 + +/* Format Types */ +#define VS_FORMAT_TYPE 0x02 +#define VS_FORMAT_TYPE_I 0x01 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MPEG2PS 0x09 +#define VS_FORMAT_MPEG2TS 0x0A +#define VS_FORMAT_MPEG4SL 0x0B +#define VS_FORMAT_WM9 0x0C +#define VS_FORMAT_DIVX 0x0D +#define VS_FORMAT_VBI 0x0E +#define VS_FORMAT_RDS 0x0F + +/* Device extension commands */ +#define EXU_REGISTER_ACCESS_CONTROL 0x00 +#define EXU_GPIO_CONTROL 0x01 +#define EXU_GPIO_GROUP_CONTROL 0x02 +#define EXU_INTERRUPT_CONTROL 0x03 + +/* State Transition and args */ +#define SAA_PROBE_CONTROL 0x01 +#define SAA_COMMIT_CONTROL 0x02 +#define SAA_STATE_CONTROL 0x03 +#define SAA_DMASTATE_STOP 0x00 +#define SAA_DMASTATE_ACQUIRE 0x01 +#define SAA_DMASTATE_PAUSE 0x02 +#define SAA_DMASTATE_RUN 0x03 + +/* A/V Mux Input Selector */ +#define SU_INPUT_SELECT_CONTROL 0x01 + +/* Encoder Profiles */ +#define EU_PROFILE_PS_DVD 0x06 +#define EU_PROFILE_TS_HQ 0x09 +#define EU_VIDEO_FORMAT_MPEG_2 0x02 + +/* Tuner */ +#define TU_AUDIO_MODE_CONTROL 0x17 + +/* Video Formats */ +#define TU_STANDARD_CONTROL 0x00 +#define TU_STANDARD_AUTO_CONTROL 0x01 +#define TU_STANDARD_NONE 0x00 +#define TU_STANDARD_NTSC_M 0x01 +#define TU_STANDARD_PAL_I 0x08 +#define TU_STANDARD_MANUAL 0x00 +#define TU_STANDARD_AUTO 0x01 + +/* Video Controls */ +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 + +/* Audio Controls */ +#define MUTE_CONTROL 0x01 +#define VOLUME_CONTROL 0x02 +#define AUDIO_DEFAULT_CONTROL 0x0D + +/* Default Volume Levels */ +#define TMHW_LEV_ADJ_DECLEV_DEFAULT 0x00 +#define TMHW_LEV_ADJ_MONOLEV_DEFAULT 0x00 +#define TMHW_LEV_ADJ_NICLEV_DEFAULT 0x00 +#define TMHW_LEV_ADJ_SAPLEV_DEFAULT 0x00 +#define TMHW_LEV_ADJ_ADCLEV_DEFAULT 0x00 + +/* Encoder Related Commands */ +#define EU_PROFILE_CONTROL 0x00 +#define EU_VIDEO_FORMAT_CONTROL 0x01 +#define EU_VIDEO_BIT_RATE_CONTROL 0x02 +#define EU_VIDEO_RESOLUTION_CONTROL 0x03 +#define EU_VIDEO_GOP_STRUCTURE_CONTROL 0x04 +#define EU_VIDEO_INPUT_ASPECT_CONTROL 0x0A +#define EU_AUDIO_FORMAT_CONTROL 0x0C +#define EU_AUDIO_BIT_RATE_CONTROL 0x0D + +/* Firmware Debugging */ +#define SET_DEBUG_LEVEL_CONTROL 0x0B +#define GET_DEBUG_DATA_CONTROL 0x0C diff --git a/drivers/media/pci/saa7164/saa7164-types.h b/drivers/media/pci/saa7164/saa7164-types.h new file mode 100644 index 00000000..1d2140a3 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-types.h @@ -0,0 +1,442 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* TODO: Cleanup and shorten the namespace */ + +/* Some structues are passed directly to/from the firmware and + * have strict alignment requirements. This is one of them. + */ +struct tmComResHWDescr { + u8 bLength; + u8 bDescriptorType; + u8 bDescriptorSubtype; + u16 bcdSpecVersion; + u32 dwClockFrequency; + u32 dwClockUpdateRes; + u8 bCapabilities; + u32 dwDeviceRegistersLocation; + u32 dwHostMemoryRegion; + u32 dwHostMemoryRegionSize; + u32 dwHostHibernatMemRegion; + u32 dwHostHibernatMemRegionSize; +} __attribute__((packed)); + +/* This is DWORD aligned on windows but I can't find the right + * gcc syntax to match the binary data from the device. + * I've manually padded with Reserved[3] bytes to match the hardware, + * but this could break if GCC decies to pack in a different way. + */ +struct tmComResInterfaceDescr { + u8 bLength; + u8 bDescriptorType; + u8 bDescriptorSubtype; + u8 bFlags; + u8 bInterfaceType; + u8 bInterfaceId; + u8 bBaseInterface; + u8 bInterruptId; + u8 bDebugInterruptId; + u8 BARLocation; + u8 Reserved[3]; +}; + +struct tmComResBusDescr { + u64 CommandRing; + u64 ResponseRing; + u32 CommandWrite; + u32 CommandRead; + u32 ResponseWrite; + u32 ResponseRead; +}; + +enum tmBusType { + NONE = 0, + TYPE_BUS_PCI = 1, + TYPE_BUS_PCIe = 2, + TYPE_BUS_USB = 3, + TYPE_BUS_I2C = 4 +}; + +struct tmComResBusInfo { + enum tmBusType Type; + u16 m_wMaxReqSize; + u8 *m_pdwSetRing; + u32 m_dwSizeSetRing; + u8 *m_pdwGetRing; + u32 m_dwSizeGetRing; + u32 m_dwSetWritePos; + u32 m_dwSetReadPos; + u32 m_dwGetWritePos; + u32 m_dwGetReadPos; + + /* All access is protected */ + struct mutex lock; + +}; + +struct tmComResInfo { + u8 id; + u8 flags; + u16 size; + u32 command; + u16 controlselector; + u8 seqno; +} __attribute__((packed)); + +enum tmComResCmd { + SET_CUR = 0x01, + GET_CUR = 0x81, + GET_MIN = 0x82, + GET_MAX = 0x83, + GET_RES = 0x84, + GET_LEN = 0x85, + GET_INFO = 0x86, + GET_DEF = 0x87 +}; + +struct cmd { + u8 seqno; + u32 inuse; + u32 timeout; + u32 signalled; + struct mutex lock; + wait_queue_head_t wait; +}; + +struct tmDescriptor { + u32 pathid; + u32 size; + void *descriptor; +}; + +struct tmComResDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 unitid; +} __attribute__((packed)); + +struct tmComResExtDevDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u32 devicetype; + u16 deviceid; + u32 numgpiopins; + u8 numgpiogroups; + u8 controlsize; +} __attribute__((packed)); + +struct tmComResGPIO { + u32 pin; + u8 state; +} __attribute__((packed)); + +struct tmComResPathDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 pathid; +} __attribute__((packed)); + +/* terminaltype */ +enum tmComResTermType { + ITT_ANTENNA = 0x0203, + LINE_CONNECTOR = 0x0603, + SPDIF_CONNECTOR = 0x0605, + COMPOSITE_CONNECTOR = 0x0401, + SVIDEO_CONNECTOR = 0x0402, + COMPONENT_CONNECTOR = 0x0403, + STANDARD_DMA = 0xF101 +}; + +struct tmComResAntTermDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 terminalid; + u16 terminaltype; + u8 assocterminal; + u8 iterminal; + u8 controlsize; +} __attribute__((packed)); + +struct tmComResTunerDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u8 sourceid; + u8 iunit; + u32 tuningstandards; + u8 controlsize; + u32 controls; +} __attribute__((packed)); + +enum tmBufferFlag { + /* the buffer does not contain any valid data */ + TM_BUFFER_FLAG_EMPTY, + + /* the buffer is filled with valid data */ + TM_BUFFER_FLAG_DONE, + + /* the buffer is the dummy buffer - TODO??? */ + TM_BUFFER_FLAG_DUMMY_BUFFER +}; + +struct tmBuffer { + u64 *pagetablevirt; + u64 pagetablephys; + u16 offset; + u8 *context; + u64 timestamp; + enum tmBufferFlag BufferFlag; + u32 lostbuffers; + u32 validbuffers; + u64 *dummypagevirt; + u64 dummypagephys; + u64 *addressvirt; +}; + +struct tmHWStreamParameters { + u32 bitspersample; + u32 samplesperline; + u32 numberoflines; + u32 pitch; + u32 linethreshold; + u64 **pagetablelistvirt; + u64 *pagetablelistphys; + u32 numpagetables; + u32 numpagetableentries; +}; + +struct tmStreamParameters { + struct tmHWStreamParameters HWStreamParameters; + u64 qwDummyPageTablePhys; + u64 *pDummyPageTableVirt; +}; + +struct tmComResDMATermDescrHeader { + u8 len; + u8 type; + u8 subtyle; + u8 unitid; + u16 terminaltype; + u8 assocterminal; + u8 sourceid; + u8 iterminal; + u32 BARLocation; + u8 flags; + u8 interruptid; + u8 buffercount; + u8 metadatasize; + u8 numformats; + u8 controlsize; +} __attribute__((packed)); + +/* + * + * Description: + * This is the transport stream format header. + * + * Settings: + * bLength - The size of this descriptor in bytes. + * bDescriptorType - CS_INTERFACE. + * bDescriptorSubtype - VS_FORMAT_MPEG2TS descriptor subtype. + * bFormatIndex - A non-zero constant that uniquely identifies the + * format. + * bDataOffset - Offset to TSP packet within MPEG-2 TS transport + * stride, in bytes. + * bPacketLength - Length of TSP packet, in bytes (typically 188). + * bStrideLength - Length of MPEG-2 TS transport stride. + * guidStrideFormat - A Globally Unique Identifier indicating the + * format of the stride data (if any). Set to zeros + * if there is no Stride Data, or if the Stride + * Data is to be ignored by the application. + * + */ +struct tmComResTSFormatDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 bFormatIndex; + u8 bDataOffset; + u8 bPacketLength; + u8 bStrideLength; + u8 guidStrideFormat[16]; +} __attribute__((packed)); + +/* Encoder related structures */ + +/* A/V Mux Selector */ +struct tmComResSelDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u8 nrinpins; + u8 sourceid; +} __attribute__((packed)); + +/* A/V Audio processor definitions */ +struct tmComResProcDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u8 sourceid; + u16 wreserved; + u8 controlsize; +} __attribute__((packed)); + +/* Video bitrate control message */ +#define EU_VIDEO_BIT_RATE_MODE_CONSTANT (0) +#define EU_VIDEO_BIT_RATE_MODE_VARIABLE_AVERAGE (1) +#define EU_VIDEO_BIT_RATE_MODE_VARIABLE_PEAK (2) +struct tmComResEncVideoBitRate { + u8 ucVideoBitRateMode; + u32 dwVideoBitRate; + u32 dwVideoBitRatePeak; +} __attribute__((packed)); + +/* Video Encoder Aspect Ratio message */ +struct tmComResEncVideoInputAspectRatio { + u8 width; + u8 height; +} __attribute__((packed)); + +/* Video Encoder GOP IBP message */ +/* 1. IPPPPPPPPPPPPPP */ +/* 2. IBPBPBPBPBPBPBP */ +/* 3. IBBPBBPBBPBBP */ +#define SAA7164_ENCODER_DEFAULT_GOP_DIST (1) +#define SAA7164_ENCODER_DEFAULT_GOP_SIZE (15) +struct tmComResEncVideoGopStructure { + u8 ucGOPSize; /* GOP Size 12, 15 */ + u8 ucRefFrameDist; /* Reference Frame Distance */ +} __attribute__((packed)); + +/* Encoder processor definition */ +struct tmComResEncoderDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u8 vsourceid; + u8 asourceid; + u8 iunit; + u32 dwmControlCap; + u32 dwmProfileCap; + u32 dwmVidFormatCap; + u8 bmVidBitrateCap; + u16 wmVidResolutionsCap; + u16 wmVidFrmRateCap; + u32 dwmAudFormatCap; + u8 bmAudBitrateCap; +} __attribute__((packed)); + +/* Audio processor definition */ +struct tmComResAFeatureDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u8 sourceid; + u8 controlsize; +} __attribute__((packed)); + +/* Audio control messages */ +struct tmComResAudioDefaults { + u8 ucDecoderLevel; + u8 ucDecoderFM_Level; + u8 ucMonoLevel; + u8 ucNICAM_Level; + u8 ucSAP_Level; + u8 ucADC_Level; +} __attribute__((packed)); + +/* Audio bitrate control message */ +struct tmComResEncAudioBitRate { + u8 ucAudioBitRateMode; + u32 dwAudioBitRate; + u32 dwAudioBitRatePeak; +} __attribute__((packed)); + +/* Tuner / AV Decoder messages */ +struct tmComResTunerStandard { + u8 std; + u32 country; +} __attribute__((packed)); + +struct tmComResTunerStandardAuto { + u8 mode; +} __attribute__((packed)); + +/* EEPROM definition for PS stream types */ +struct tmComResPSFormatDescrHeader { + u8 len; + u8 type; + u8 subtype; + u8 bFormatIndex; + u16 wPacketLength; + u16 wPackLength; + u8 bPackDataType; +} __attribute__((packed)); + +/* VBI control structure */ +struct tmComResVBIFormatDescrHeader { + u8 len; + u8 type; + u8 subtype; /* VS_FORMAT_VBI */ + u8 bFormatIndex; + u32 VideoStandard; /* See KS_AnalogVideoStandard, NTSC = 1 */ + u8 StartLine; /* NTSC Start = 10 */ + u8 EndLine; /* NTSC = 21 */ + u8 FieldRate; /* 60 for NTSC */ + u8 bNumLines; /* Unused - scheduled for removal */ +} __attribute__((packed)); + +struct tmComResProbeCommit { + u16 bmHint; + u8 bFormatIndex; + u8 bFrameIndex; +} __attribute__((packed)); + +struct tmComResDebugSetLevel { + u32 dwDebugLevel; +} __attribute__((packed)); + +struct tmComResDebugGetData { + u32 dwResult; + u8 ucDebugData[256]; +} __attribute__((packed)); + +struct tmFwInfoStruct { + u32 status; + u32 mode; + u32 devicespec; + u32 deviceinst; + u32 CPULoad; + u32 RemainHeap; + u32 CPUClock; + u32 RAMSpeed; +} __attribute__((packed)); diff --git a/drivers/media/pci/saa7164/saa7164-vbi.c b/drivers/media/pci/saa7164/saa7164-vbi.c new file mode 100644 index 00000000..da224eb3 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-vbi.c @@ -0,0 +1,1376 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +static struct saa7164_tvnorm saa7164_tvnorms[] = { + { + .name = "NTSC-M", + .id = V4L2_STD_NTSC_M, + }, { + .name = "NTSC-JP", + .id = V4L2_STD_NTSC_M_JP, + } +}; + +static const u32 saa7164_v4l2_ctrls[] = { + 0 +}; + +/* Take the encoder configuration from the port struct and + * flush it to the hardware. + */ +static void saa7164_vbi_configure(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + dprintk(DBGLVL_VBI, "%s()\n", __func__); + + port->vbi_params.width = port->width; + port->vbi_params.height = port->height; + port->vbi_params.is_50hz = + (port->encodernorm.id & V4L2_STD_625_50) != 0; + + /* Set up the DIF (enable it) for analog mode by default */ + saa7164_api_initialize_dif(port); + + /* Configure the correct video standard */ +#if 0 + saa7164_api_configure_dif(port, port->encodernorm.id); +#endif + +#if 0 + /* Ensure the audio decoder is correct configured */ + saa7164_api_set_audio_std(port); +#endif + dprintk(DBGLVL_VBI, "%s() ends\n", __func__); +} + +static int saa7164_vbi_buffers_dealloc(struct saa7164_port *port) +{ + struct list_head *c, *n, *p, *q, *l, *v; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct saa7164_user_buffer *ubuf; + + /* Remove any allocated buffers */ + mutex_lock(&port->dmaqueue_lock); + + dprintk(DBGLVL_VBI, "%s(port=%d) dmaqueue\n", __func__, port->nr); + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + list_del(c); + saa7164_buffer_dealloc(buf); + } + + dprintk(DBGLVL_VBI, "%s(port=%d) used\n", __func__, port->nr); + list_for_each_safe(p, q, &port->list_buf_used.list) { + ubuf = list_entry(p, struct saa7164_user_buffer, list); + list_del(p); + saa7164_buffer_dealloc_user(ubuf); + } + + dprintk(DBGLVL_VBI, "%s(port=%d) free\n", __func__, port->nr); + list_for_each_safe(l, v, &port->list_buf_free.list) { + ubuf = list_entry(l, struct saa7164_user_buffer, list); + list_del(l); + saa7164_buffer_dealloc_user(ubuf); + } + + mutex_unlock(&port->dmaqueue_lock); + dprintk(DBGLVL_VBI, "%s(port=%d) done\n", __func__, port->nr); + + return 0; +} + +/* Dynamic buffer switch at vbi start time */ +static int saa7164_vbi_buffers_alloc(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct saa7164_user_buffer *ubuf; + struct tmHWStreamParameters *params = &port->hw_streamingparams; + int result = -ENODEV, i; + int len = 0; + + dprintk(DBGLVL_VBI, "%s()\n", __func__); + + /* TODO: NTSC SPECIFIC */ + /* Init and establish defaults */ + params->samplesperline = 1440; + params->numberoflines = 12; + params->numberoflines = 18; + params->pitch = 1600; + params->pitch = 1440; + params->numpagetables = 2 + + ((params->numberoflines * params->pitch) / PAGE_SIZE); + params->bitspersample = 8; + params->linethreshold = 0; + params->pagetablelistvirt = NULL; + params->pagetablelistphys = NULL; + params->numpagetableentries = port->hwcfg.buffercount; + + /* Allocate the PCI resources, buffers (hard) */ + for (i = 0; i < port->hwcfg.buffercount; i++) { + buf = saa7164_buffer_alloc(port, + params->numberoflines * + params->pitch); + + if (!buf) { + printk(KERN_ERR "%s() failed " + "(errno = %d), unable to allocate buffer\n", + __func__, result); + result = -ENOMEM; + goto failed; + } else { + + mutex_lock(&port->dmaqueue_lock); + list_add_tail(&buf->list, &port->dmaqueue.list); + mutex_unlock(&port->dmaqueue_lock); + + } + } + + /* Allocate some kernel buffers for copying + * to userpsace. + */ + len = params->numberoflines * params->pitch; + + if (vbi_buffers < 16) + vbi_buffers = 16; + if (vbi_buffers > 512) + vbi_buffers = 512; + + for (i = 0; i < vbi_buffers; i++) { + + ubuf = saa7164_buffer_alloc_user(dev, len); + if (ubuf) { + mutex_lock(&port->dmaqueue_lock); + list_add_tail(&ubuf->list, &port->list_buf_free.list); + mutex_unlock(&port->dmaqueue_lock); + } + + } + + result = 0; + +failed: + return result; +} + + +static int saa7164_vbi_initialize(struct saa7164_port *port) +{ + saa7164_vbi_configure(port); + return 0; +} + +/* -- V4L2 --------------------------------------------------------- */ +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + unsigned int i; + + dprintk(DBGLVL_VBI, "%s(id=0x%x)\n", __func__, (u32)id); + + for (i = 0; i < ARRAY_SIZE(saa7164_tvnorms); i++) { + if (id & saa7164_tvnorms[i].id) + break; + } + if (i == ARRAY_SIZE(saa7164_tvnorms)) + return -EINVAL; + + port->encodernorm = saa7164_tvnorms[i]; + + /* Update the audio decoder while is not running in + * auto detect mode. + */ + saa7164_api_set_audio_std(port); + + dprintk(DBGLVL_VBI, "%s(id=0x%x) OK\n", __func__, (u32)id); + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + int n; + + char *inputs[] = { "tuner", "composite", "svideo", "aux", + "composite 2", "svideo 2", "aux 2" }; + + if (i->index >= 7) + return -EINVAL; + + strcpy(i->name, inputs[i->index]); + + if (i->index == 0) + i->type = V4L2_INPUT_TYPE_TUNER; + else + i->type = V4L2_INPUT_TYPE_CAMERA; + + for (n = 0; n < ARRAY_SIZE(saa7164_tvnorms); n++) + i->std |= saa7164_tvnorms[n].id; + + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + if (saa7164_api_get_videomux(port) != SAA_OK) + return -EIO; + + *i = (port->mux_input - 1); + + dprintk(DBGLVL_VBI, "%s() input=%d\n", __func__, *i); + + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_VBI, "%s() input=%d\n", __func__, i); + + if (i >= 7) + return -EINVAL; + + port->mux_input = i + 1; + + if (saa7164_api_set_videomux(port) != SAA_OK) + return -EIO; + + return 0; +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + if (0 != t->index) + return -EINVAL; + + strcpy(t->name, "tuner"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO; + + dprintk(DBGLVL_VBI, "VIDIOC_G_TUNER: tuner type %d\n", t->type); + + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + /* Update the A/V core */ + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = port->freq; + + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + struct saa7164_port *tsport; + struct dvb_frontend *fe; + + /* TODO: Pull this for the std */ + struct analog_parameters params = { + .mode = V4L2_TUNER_ANALOG_TV, + .audmode = V4L2_TUNER_MODE_STEREO, + .std = port->encodernorm.id, + .frequency = f->frequency + }; + + /* Stop the encoder */ + dprintk(DBGLVL_VBI, "%s() frequency=%d tuner=%d\n", __func__, + f->frequency, f->tuner); + + if (f->tuner != 0) + return -EINVAL; + + if (f->type != V4L2_TUNER_ANALOG_TV) + return -EINVAL; + + port->freq = f->frequency; + + /* Update the hardware */ + if (port->nr == SAA7164_PORT_VBI1) + tsport = &dev->ports[SAA7164_PORT_TS1]; + else + if (port->nr == SAA7164_PORT_VBI2) + tsport = &dev->ports[SAA7164_PORT_TS2]; + else + BUG(); + + fe = tsport->dvb.frontend; + + if (fe && fe->ops.tuner_ops.set_analog_params) + fe->ops.tuner_ops.set_analog_params(fe, ¶ms); + else + printk(KERN_ERR "%s() No analog tuner, aborting\n", __func__); + + saa7164_vbi_initialize(port); + + return 0; +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_VBI, "%s(id=%d, value=%d)\n", __func__, + ctl->id, ctl->value); + + switch (ctl->id) { + case V4L2_CID_BRIGHTNESS: + ctl->value = port->ctl_brightness; + break; + case V4L2_CID_CONTRAST: + ctl->value = port->ctl_contrast; + break; + case V4L2_CID_SATURATION: + ctl->value = port->ctl_saturation; + break; + case V4L2_CID_HUE: + ctl->value = port->ctl_hue; + break; + case V4L2_CID_SHARPNESS: + ctl->value = port->ctl_sharpness; + break; + case V4L2_CID_AUDIO_VOLUME: + ctl->value = port->ctl_volume; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + int ret = 0; + + dprintk(DBGLVL_VBI, "%s(id=%d, value=%d)\n", __func__, + ctl->id, ctl->value); + + switch (ctl->id) { + case V4L2_CID_BRIGHTNESS: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_brightness = ctl->value; + saa7164_api_set_usercontrol(port, + PU_BRIGHTNESS_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_CONTRAST: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_contrast = ctl->value; + saa7164_api_set_usercontrol(port, PU_CONTRAST_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_SATURATION: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_saturation = ctl->value; + saa7164_api_set_usercontrol(port, + PU_SATURATION_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_HUE: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_hue = ctl->value; + saa7164_api_set_usercontrol(port, PU_HUE_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_SHARPNESS: + if ((ctl->value >= 0) && (ctl->value <= 255)) { + port->ctl_sharpness = ctl->value; + saa7164_api_set_usercontrol(port, PU_SHARPNESS_CONTROL); + } else + ret = -EINVAL; + break; + case V4L2_CID_AUDIO_VOLUME: + if ((ctl->value >= -83) && (ctl->value <= 24)) { + port->ctl_volume = ctl->value; + saa7164_api_set_audio_volume(port, port->ctl_volume); + } else + ret = -EINVAL; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int saa7164_get_ctrl(struct saa7164_port *port, + struct v4l2_ext_control *ctrl) +{ + struct saa7164_vbi_params *params = &port->vbi_params; + + switch (ctrl->id) { + case V4L2_CID_MPEG_STREAM_TYPE: + ctrl->value = params->stream_type; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + ctrl->value = params->ctl_mute; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + ctrl->value = params->ctl_aspect; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + ctrl->value = params->refdist; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + ctrl->value = params->gop_size; + break; + default: + return -EINVAL; + } + return 0; +} + +static int vidioc_g_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + int i, err = 0; + + if (ctrls->ctrl_class == V4L2_CTRL_CLASS_MPEG) { + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + + err = saa7164_get_ctrl(port, ctrl); + if (err) { + ctrls->error_idx = i; + break; + } + } + return err; + + } + + return -EINVAL; +} + +static int saa7164_try_ctrl(struct v4l2_ext_control *ctrl, int ac3) +{ + int ret = -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_MPEG_STREAM_TYPE: + if ((ctrl->value == V4L2_MPEG_STREAM_TYPE_MPEG2_PS) || + (ctrl->value == V4L2_MPEG_STREAM_TYPE_MPEG2_TS)) + ret = 0; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + if ((ctrl->value >= 0) && + (ctrl->value <= 1)) + ret = 0; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + if ((ctrl->value >= V4L2_MPEG_VIDEO_ASPECT_1x1) && + (ctrl->value <= V4L2_MPEG_VIDEO_ASPECT_221x100)) + ret = 0; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + if ((ctrl->value >= 0) && + (ctrl->value <= 255)) + ret = 0; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + if ((ctrl->value >= 1) && + (ctrl->value <= 3)) + ret = 0; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int vidioc_try_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + int i, err = 0; + + if (ctrls->ctrl_class == V4L2_CTRL_CLASS_MPEG) { + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + + err = saa7164_try_ctrl(ctrl, 0); + if (err) { + ctrls->error_idx = i; + break; + } + } + return err; + } + + return -EINVAL; +} + +static int saa7164_set_ctrl(struct saa7164_port *port, + struct v4l2_ext_control *ctrl) +{ + struct saa7164_vbi_params *params = &port->vbi_params; + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_MPEG_STREAM_TYPE: + params->stream_type = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + params->ctl_mute = ctrl->value; + ret = saa7164_api_audio_mute(port, params->ctl_mute); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, + ret); + ret = -EIO; + } + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + params->ctl_aspect = ctrl->value; + ret = saa7164_api_set_aspect_ratio(port); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, + ret); + ret = -EIO; + } + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + params->refdist = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + params->gop_size = ctrl->value; + break; + default: + return -EINVAL; + } + + /* TODO: Update the hardware */ + + return ret; +} + +static int vidioc_s_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + int i, err = 0; + + if (ctrls->ctrl_class == V4L2_CTRL_CLASS_MPEG) { + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + + err = saa7164_try_ctrl(ctrl, 0); + if (err) { + ctrls->error_idx = i; + break; + } + err = saa7164_set_ctrl(port, ctrl); + if (err) { + ctrls->error_idx = i; + break; + } + } + return err; + + } + + return -EINVAL; +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + strcpy(cap->driver, dev->name); + strlcpy(cap->card, saa7164_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + + cap->capabilities = + V4L2_CAP_VBI_CAPTURE | + V4L2_CAP_READWRITE | + 0; + + cap->capabilities |= V4L2_CAP_TUNER; + cap->version = 0; + + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index != 0) + return -EINVAL; + + strlcpy(f->description, "VBI", sizeof(f->description)); + f->pixelformat = V4L2_PIX_FMT_MPEG; + + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + port->ts_packet_size * port->ts_packet_count; + f->fmt.pix.colorspace = 0; + f->fmt.pix.width = port->width; + f->fmt.pix.height = port->height; + + dprintk(DBGLVL_VBI, "VIDIOC_G_FMT: w: %d, h: %d\n", + port->width, port->height); + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + port->ts_packet_size * port->ts_packet_count; + f->fmt.pix.colorspace = 0; + dprintk(DBGLVL_VBI, "VIDIOC_TRY_FMT: w: %d, h: %d\n", + port->width, port->height); + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + port->ts_packet_size * port->ts_packet_count; + f->fmt.pix.colorspace = 0; + + dprintk(DBGLVL_VBI, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n", + f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field); + + return 0; +} + +static int fill_queryctrl(struct saa7164_vbi_params *params, + struct v4l2_queryctrl *c) +{ + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(c, 0x0, 0xff, 1, 127); + case V4L2_CID_CONTRAST: + return v4l2_ctrl_query_fill(c, 0x0, 0xff, 1, 66); + case V4L2_CID_SATURATION: + return v4l2_ctrl_query_fill(c, 0x0, 0xff, 1, 62); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(c, 0x0, 0xff, 1, 128); + case V4L2_CID_SHARPNESS: + return v4l2_ctrl_query_fill(c, 0x0, 0x0f, 1, 8); + case V4L2_CID_MPEG_AUDIO_MUTE: + return v4l2_ctrl_query_fill(c, 0x0, 0x01, 1, 0); + case V4L2_CID_AUDIO_VOLUME: + return v4l2_ctrl_query_fill(c, -83, 24, 1, 20); + case V4L2_CID_MPEG_STREAM_TYPE: + return v4l2_ctrl_query_fill(c, + V4L2_MPEG_STREAM_TYPE_MPEG2_PS, + V4L2_MPEG_STREAM_TYPE_MPEG2_TS, + 1, V4L2_MPEG_STREAM_TYPE_MPEG2_PS); + case V4L2_CID_MPEG_VIDEO_ASPECT: + return v4l2_ctrl_query_fill(c, + V4L2_MPEG_VIDEO_ASPECT_1x1, + V4L2_MPEG_VIDEO_ASPECT_221x100, + 1, V4L2_MPEG_VIDEO_ASPECT_4x3); + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + return v4l2_ctrl_query_fill(c, 1, 255, 1, 15); + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + return v4l2_ctrl_query_fill(c, + 1, 3, 1, 1); + default: + return -EINVAL; + } +} + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + struct saa7164_vbi_fh *fh = priv; + struct saa7164_port *port = fh->port; + int i, next; + u32 id = c->id; + + memset(c, 0, sizeof(*c)); + + next = !!(id & V4L2_CTRL_FLAG_NEXT_CTRL); + c->id = id & ~V4L2_CTRL_FLAG_NEXT_CTRL; + + for (i = 0; i < ARRAY_SIZE(saa7164_v4l2_ctrls); i++) { + if (next) { + if (c->id < saa7164_v4l2_ctrls[i]) + c->id = saa7164_v4l2_ctrls[i]; + else + continue; + } + + if (c->id == saa7164_v4l2_ctrls[i]) + return fill_queryctrl(&port->vbi_params, c); + + if (c->id < saa7164_v4l2_ctrls[i]) + break; + } + + return -EINVAL; +} + +static int saa7164_vbi_stop_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_VBI, "%s() Stopped\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_vbi_acquire_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_VBI, "%s() Acquired\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_vbi_pause_port(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_VBI, "%s() Paused\n", __func__); + ret = 0; + } + + return ret; +} + +/* Firmware is very windows centric, meaning you have to transition + * the part through AVStream / KS Windows stages, forwards or backwards. + * States are: stopped, acquired (h/w), paused, started. + * We have to leave here will all of the soft buffers on the free list, + * else the cfg_post() func won't have soft buffers to correctly configure. + */ +static int saa7164_vbi_stop_streaming(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct saa7164_user_buffer *ubuf; + struct list_head *c, *n; + int ret; + + dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr); + + ret = saa7164_vbi_pause_port(port); + ret = saa7164_vbi_acquire_port(port); + ret = saa7164_vbi_stop_port(port); + + dprintk(DBGLVL_VBI, "%s(port=%d) Hardware stopped\n", __func__, + port->nr); + + /* Reset the state of any allocated buffer resources */ + mutex_lock(&port->dmaqueue_lock); + + /* Reset the hard and soft buffer state */ + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + buf->flags = SAA7164_BUFFER_FREE; + buf->pos = 0; + } + + list_for_each_safe(c, n, &port->list_buf_used.list) { + ubuf = list_entry(c, struct saa7164_user_buffer, list); + ubuf->pos = 0; + list_move_tail(&ubuf->list, &port->list_buf_free.list); + } + + mutex_unlock(&port->dmaqueue_lock); + + /* Free any allocated resources */ + saa7164_vbi_buffers_dealloc(port); + + dprintk(DBGLVL_VBI, "%s(port=%d) Released\n", __func__, port->nr); + + return ret; +} + +static int saa7164_vbi_start_streaming(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int result, ret = 0; + + dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr); + + port->done_first_interrupt = 0; + + /* allocate all of the PCIe DMA buffer resources on the fly, + * allowing switching between TS and PS payloads without + * requiring a complete driver reload. + */ + saa7164_vbi_buffers_alloc(port); + + /* Configure the encoder with any cache values */ +#if 0 + saa7164_api_set_encoder(port); + saa7164_api_get_encoder(port); +#endif + + /* Place the empty buffers on the hardware */ + saa7164_buffer_cfg_port(port); + + /* Negotiate format */ + if (saa7164_api_set_vbi_format(port) != SAA_OK) { + printk(KERN_ERR "%s() No supported VBI format\n", __func__); + ret = -EIO; + goto out; + } + + /* Acquire the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", + __func__, result); + + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_VBI, "%s() Acquired\n", __func__); + + /* Pause the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_vbi_stop_port(port); + if (result != SAA_OK) { + printk(KERN_ERR "%s() pause/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_VBI, "%s() Paused\n", __func__); + + /* Start the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_vbi_acquire_port(port); + result = saa7164_vbi_stop_port(port); + if (result != SAA_OK) { + printk(KERN_ERR "%s() run/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + } else + dprintk(DBGLVL_VBI, "%s() Running\n", __func__); + +out: + return ret; +} + +static int saa7164_vbi_fmt(struct file *file, void *priv, + struct v4l2_format *f) +{ + /* ntsc */ + f->fmt.vbi.samples_per_line = 1600; + f->fmt.vbi.samples_per_line = 1440; + f->fmt.vbi.sampling_rate = 27000000; + f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; + f->fmt.vbi.offset = 0; + f->fmt.vbi.flags = 0; + f->fmt.vbi.start[0] = 10; + f->fmt.vbi.count[0] = 18; + f->fmt.vbi.start[1] = 263 + 10 + 1; + f->fmt.vbi.count[1] = 18; + return 0; +} + +static int fops_open(struct file *file) +{ + struct saa7164_dev *dev; + struct saa7164_port *port; + struct saa7164_vbi_fh *fh; + + port = (struct saa7164_port *)video_get_drvdata(video_devdata(file)); + if (!port) + return -ENODEV; + + dev = port->dev; + + dprintk(DBGLVL_VBI, "%s()\n", __func__); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + + file->private_data = fh; + fh->port = port; + + return 0; +} + +static int fops_release(struct file *file) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_VBI, "%s()\n", __func__); + + /* Shut device down on last close */ + if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) { + if (atomic_dec_return(&port->v4l_reader_count) == 0) { + /* stop vbi capture then cancel buffers */ + saa7164_vbi_stop_streaming(port); + } + } + + file->private_data = NULL; + kfree(fh); + + return 0; +} + +static struct +saa7164_user_buffer *saa7164_vbi_next_buf(struct saa7164_port *port) +{ + struct saa7164_user_buffer *ubuf = NULL; + struct saa7164_dev *dev = port->dev; + u32 crc; + + mutex_lock(&port->dmaqueue_lock); + if (!list_empty(&port->list_buf_used.list)) { + ubuf = list_first_entry(&port->list_buf_used.list, + struct saa7164_user_buffer, list); + + if (crc_checking) { + crc = crc32(0, ubuf->data, ubuf->actual_size); + if (crc != ubuf->crc) { + printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", + __func__, + ubuf, ubuf->crc, crc); + } + } + + } + mutex_unlock(&port->dmaqueue_lock); + + dprintk(DBGLVL_VBI, "%s() returns %p\n", __func__, ubuf); + + return ubuf; +} + +static ssize_t fops_read(struct file *file, char __user *buffer, + size_t count, loff_t *pos) +{ + struct saa7164_vbi_fh *fh = file->private_data; + struct saa7164_port *port = fh->port; + struct saa7164_user_buffer *ubuf = NULL; + struct saa7164_dev *dev = port->dev; + int ret = 0; + int rem, cnt; + u8 *p; + + port->last_read_msecs_diff = port->last_read_msecs; + port->last_read_msecs = jiffies_to_msecs(jiffies); + port->last_read_msecs_diff = port->last_read_msecs - + port->last_read_msecs_diff; + + saa7164_histogram_update(&port->read_interval, + port->last_read_msecs_diff); + + if (*pos) { + printk(KERN_ERR "%s() ESPIPE\n", __func__); + return -ESPIPE; + } + + if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { + if (atomic_inc_return(&port->v4l_reader_count) == 1) { + + if (saa7164_vbi_initialize(port) < 0) { + printk(KERN_ERR "%s() EINVAL\n", __func__); + return -EINVAL; + } + + saa7164_vbi_start_streaming(port); + msleep(200); + } + } + + /* blocking wait for buffer */ + if ((file->f_flags & O_NONBLOCK) == 0) { + if (wait_event_interruptible(port->wait_read, + saa7164_vbi_next_buf(port))) { + printk(KERN_ERR "%s() ERESTARTSYS\n", __func__); + return -ERESTARTSYS; + } + } + + /* Pull the first buffer from the used list */ + ubuf = saa7164_vbi_next_buf(port); + + while ((count > 0) && ubuf) { + + /* set remaining bytes to copy */ + rem = ubuf->actual_size - ubuf->pos; + cnt = rem > count ? count : rem; + + p = ubuf->data + ubuf->pos; + + dprintk(DBGLVL_VBI, + "%s() count=%d cnt=%d rem=%d buf=%p buf->pos=%d\n", + __func__, (int)count, cnt, rem, ubuf, ubuf->pos); + + if (copy_to_user(buffer, p, cnt)) { + printk(KERN_ERR "%s() copy_to_user failed\n", __func__); + if (!ret) { + printk(KERN_ERR "%s() EFAULT\n", __func__); + ret = -EFAULT; + } + goto err; + } + + ubuf->pos += cnt; + count -= cnt; + buffer += cnt; + ret += cnt; + + if (ubuf->pos > ubuf->actual_size) + printk(KERN_ERR "read() pos > actual, huh?\n"); + + if (ubuf->pos == ubuf->actual_size) { + + /* finished with current buffer, take next buffer */ + + /* Requeue the buffer on the free list */ + ubuf->pos = 0; + + mutex_lock(&port->dmaqueue_lock); + list_move_tail(&ubuf->list, &port->list_buf_free.list); + mutex_unlock(&port->dmaqueue_lock); + + /* Dequeue next */ + if ((file->f_flags & O_NONBLOCK) == 0) { + if (wait_event_interruptible(port->wait_read, + saa7164_vbi_next_buf(port))) { + break; + } + } + ubuf = saa7164_vbi_next_buf(port); + } + } +err: + if (!ret && !ubuf) { + printk(KERN_ERR "%s() EAGAIN\n", __func__); + ret = -EAGAIN; + } + + return ret; +} + +static unsigned int fops_poll(struct file *file, poll_table *wait) +{ + struct saa7164_vbi_fh *fh = (struct saa7164_vbi_fh *)file->private_data; + struct saa7164_port *port = fh->port; + unsigned int mask = 0; + + port->last_poll_msecs_diff = port->last_poll_msecs; + port->last_poll_msecs = jiffies_to_msecs(jiffies); + port->last_poll_msecs_diff = port->last_poll_msecs - + port->last_poll_msecs_diff; + + saa7164_histogram_update(&port->poll_interval, + port->last_poll_msecs_diff); + + if (!video_is_registered(port->v4l_device)) + return -EIO; + + if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { + if (atomic_inc_return(&port->v4l_reader_count) == 1) { + if (saa7164_vbi_initialize(port) < 0) + return -EINVAL; + saa7164_vbi_start_streaming(port); + msleep(200); + } + } + + /* blocking wait for buffer */ + if ((file->f_flags & O_NONBLOCK) == 0) { + if (wait_event_interruptible(port->wait_read, + saa7164_vbi_next_buf(port))) { + return -ERESTARTSYS; + } + } + + /* Pull the first buffer from the used list */ + if (!list_empty(&port->list_buf_used.list)) + mask |= POLLIN | POLLRDNORM; + + return mask; +} +static const struct v4l2_file_operations vbi_fops = { + .owner = THIS_MODULE, + .open = fops_open, + .release = fops_release, + .read = fops_read, + .poll = fops_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops vbi_ioctl_ops = { + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, + .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, + .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, + .vidioc_queryctrl = vidioc_queryctrl, +#if 0 + .vidioc_g_chip_ident = saa7164_g_chip_ident, +#endif +#ifdef CONFIG_VIDEO_ADV_DEBUG +#if 0 + .vidioc_g_register = saa7164_g_register, + .vidioc_s_register = saa7164_s_register, +#endif +#endif + .vidioc_g_fmt_vbi_cap = saa7164_vbi_fmt, + .vidioc_try_fmt_vbi_cap = saa7164_vbi_fmt, + .vidioc_s_fmt_vbi_cap = saa7164_vbi_fmt, +}; + +static struct video_device saa7164_vbi_template = { + .name = "saa7164", + .fops = &vbi_fops, + .ioctl_ops = &vbi_ioctl_ops, + .minor = -1, + .tvnorms = SAA7164_NORMS, + .current_norm = V4L2_STD_NTSC_M, +}; + +static struct video_device *saa7164_vbi_alloc( + struct saa7164_port *port, + struct pci_dev *pci, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_VBI, "%s()\n", __func__); + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + + *vfd = *template; + snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, + type, saa7164_boards[dev->board].name); + + vfd->parent = &pci->dev; + vfd->release = video_device_release; + return vfd; +} + +int saa7164_vbi_register(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + int result = -ENODEV; + + dprintk(DBGLVL_VBI, "%s()\n", __func__); + + if (port->type != SAA7164_MPEG_VBI) + BUG(); + + /* Sanity check that the PCI configuration space is active */ + if (port->hwcfg.BARLocation == 0) { + printk(KERN_ERR "%s() failed " + "(errno = %d), NO PCI configuration\n", + __func__, result); + result = -ENOMEM; + goto failed; + } + + /* Establish VBI defaults here */ + + /* Allocate and register the video device node */ + port->v4l_device = saa7164_vbi_alloc(port, + dev->pci, &saa7164_vbi_template, "vbi"); + + if (!port->v4l_device) { + printk(KERN_INFO "%s: can't allocate vbi device\n", + dev->name); + result = -ENOMEM; + goto failed; + } + + video_set_drvdata(port->v4l_device, port); + result = video_register_device(port->v4l_device, + VFL_TYPE_VBI, -1); + if (result < 0) { + printk(KERN_INFO "%s: can't register vbi device\n", + dev->name); + /* TODO: We're going to leak here if we don't dealloc + The buffers above. The unreg function can't deal wit it. + */ + goto failed; + } + + printk(KERN_INFO "%s: registered device vbi%d [vbi]\n", + dev->name, port->v4l_device->num); + + /* Configure the hardware defaults */ + + result = 0; +failed: + return result; +} + +void saa7164_vbi_unregister(struct saa7164_port *port) +{ + struct saa7164_dev *dev = port->dev; + + dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr); + + if (port->type != SAA7164_MPEG_VBI) + BUG(); + + if (port->v4l_device) { + if (port->v4l_device->minor != -1) + video_unregister_device(port->v4l_device); + else + video_device_release(port->v4l_device); + + port->v4l_device = NULL; + } + +} diff --git a/drivers/media/pci/saa7164/saa7164.h b/drivers/media/pci/saa7164/saa7164.h new file mode 100644 index 00000000..437284e7 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164.h @@ -0,0 +1,616 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + Driver architecture + ******************* + + saa7164_core.c/buffer.c/cards.c/i2c.c/dvb.c + | : Standard Linux driver framework for creating + | : exposing and managing interfaces to the rest + | : of the kernel or userland. Also uses _fw.c to load + | : firmware direct into the PCIe bus, bypassing layers. + V + saa7164_api..() : Translate kernel specific functions/features + | : into command buffers. + V + saa7164_cmd..() : Manages the flow of command packets on/off, + | : the bus. Deal with bus errors, timeouts etc. + V + saa7164_bus..() : Manage a read/write memory ring buffer in the + | : PCIe Address space. + | + | saa7164_fw...() : Load any frimware + | | : direct into the device + V V + <- ----------------- PCIe address space -------------------- -> +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "saa7164-reg.h" +#include "saa7164-types.h" + +#define SAA7164_MAXBOARDS 8 + +#define UNSET (-1U) +#define SAA7164_BOARD_NOAUTO UNSET +#define SAA7164_BOARD_UNKNOWN 0 +#define SAA7164_BOARD_UNKNOWN_REV2 1 +#define SAA7164_BOARD_UNKNOWN_REV3 2 +#define SAA7164_BOARD_HAUPPAUGE_HVR2250 3 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200 4 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_2 5 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 +#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 +#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_5 10 + +#define SAA7164_MAX_UNITS 8 +#define SAA7164_TS_NUMBER_OF_LINES 312 +#define SAA7164_PS_NUMBER_OF_LINES 256 +#define SAA7164_PT_ENTRIES 16 /* (312 * 188) / 4096 */ +#define SAA7164_MAX_ENCODER_BUFFERS 64 /* max 5secs of latency at 6Mbps */ +#define SAA7164_MAX_VBI_BUFFERS 64 + +/* Port related defines */ +#define SAA7164_PORT_TS1 (0) +#define SAA7164_PORT_TS2 (SAA7164_PORT_TS1 + 1) +#define SAA7164_PORT_ENC1 (SAA7164_PORT_TS2 + 1) +#define SAA7164_PORT_ENC2 (SAA7164_PORT_ENC1 + 1) +#define SAA7164_PORT_VBI1 (SAA7164_PORT_ENC2 + 1) +#define SAA7164_PORT_VBI2 (SAA7164_PORT_VBI1 + 1) +#define SAA7164_MAX_PORTS (SAA7164_PORT_VBI2 + 1) + +#define DBGLVL_FW 4 +#define DBGLVL_DVB 8 +#define DBGLVL_I2C 16 +#define DBGLVL_API 32 +#define DBGLVL_CMD 64 +#define DBGLVL_BUS 128 +#define DBGLVL_IRQ 256 +#define DBGLVL_BUF 512 +#define DBGLVL_ENC 1024 +#define DBGLVL_VBI 2048 +#define DBGLVL_THR 4096 +#define DBGLVL_CPU 8192 + +#define SAA7164_NORMS \ + (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443) + +enum port_t { + SAA7164_MPEG_UNDEFINED = 0, + SAA7164_MPEG_DVB, + SAA7164_MPEG_ENCODER, + SAA7164_MPEG_VBI, +}; + +enum saa7164_i2c_bus_nr { + SAA7164_I2C_BUS_0 = 0, + SAA7164_I2C_BUS_1, + SAA7164_I2C_BUS_2, +}; + +enum saa7164_buffer_flags { + SAA7164_BUFFER_UNDEFINED = 0, + SAA7164_BUFFER_FREE, + SAA7164_BUFFER_BUSY, + SAA7164_BUFFER_FULL +}; + +enum saa7164_unit_type { + SAA7164_UNIT_UNDEFINED = 0, + SAA7164_UNIT_DIGITAL_DEMODULATOR, + SAA7164_UNIT_ANALOG_DEMODULATOR, + SAA7164_UNIT_TUNER, + SAA7164_UNIT_EEPROM, + SAA7164_UNIT_ZILOG_IRBLASTER, + SAA7164_UNIT_ENCODER, +}; + +/* The PCIe bridge doesn't grant direct access to i2c. + * Instead, you address i2c devices using a uniqely + * allocated 'unitid' value via a messaging API. This + * is a problem. The kernel and existing demod/tuner + * drivers expect to talk 'i2c', so we have to maintain + * a translation layer, and a series of functions to + * convert i2c bus + device address into a unit id. + */ +struct saa7164_unit { + enum saa7164_unit_type type; + u8 id; + char *name; + enum saa7164_i2c_bus_nr i2c_bus_nr; + u8 i2c_bus_addr; + u8 i2c_reg_len; +}; + +struct saa7164_board { + char *name; + enum port_t porta, portb, portc, + portd, porte, portf; + enum { + SAA7164_CHIP_UNDEFINED = 0, + SAA7164_CHIP_REV2, + SAA7164_CHIP_REV3, + } chiprev; + struct saa7164_unit unit[SAA7164_MAX_UNITS]; +}; + +struct saa7164_subid { + u16 subvendor; + u16 subdevice; + u32 card; +}; + +struct saa7164_encoder_fh { + struct saa7164_port *port; + atomic_t v4l_reading; +}; + +struct saa7164_vbi_fh { + struct saa7164_port *port; + atomic_t v4l_reading; +}; + +struct saa7164_histogram_bucket { + u32 val; + u32 count; + u64 update_time; +}; + +struct saa7164_histogram { + char name[32]; + struct saa7164_histogram_bucket counter1[64]; +}; + +struct saa7164_user_buffer { + struct list_head list; + + /* Attributes */ + u8 *data; + u32 pos; + u32 actual_size; + + u32 crc; +}; + +struct saa7164_fw_status { + + /* RISC Core details */ + u32 status; + u32 mode; + u32 spec; + u32 inst; + u32 cpuload; + u32 remainheap; + + /* Firmware version */ + u32 version; + u32 major; + u32 sub; + u32 rel; + u32 buildnr; +}; + +struct saa7164_dvb { + struct mutex lock; + struct dvb_adapter adapter; + struct dvb_frontend *frontend; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net net; + int feeding; +}; + +struct saa7164_i2c { + struct saa7164_dev *dev; + + enum saa7164_i2c_bus_nr nr; + + /* I2C I/O */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + u32 i2c_rc; +}; + +struct saa7164_ctrl { + struct v4l2_queryctrl v; +}; + +struct saa7164_tvnorm { + char *name; + v4l2_std_id id; +}; + +struct saa7164_encoder_params { + struct saa7164_tvnorm encodernorm; + u32 height; + u32 width; + u32 is_50hz; + u32 bitrate; /* bps */ + u32 bitrate_peak; /* bps */ + u32 bitrate_mode; + u32 stream_type; /* V4L2_MPEG_STREAM_TYPE_MPEG2_TS */ + + u32 audio_sampling_freq; + u32 ctl_mute; + u32 ctl_aspect; + u32 refdist; + u32 gop_size; +}; + +struct saa7164_vbi_params { + struct saa7164_tvnorm encodernorm; + u32 height; + u32 width; + u32 is_50hz; + u32 bitrate; /* bps */ + u32 bitrate_peak; /* bps */ + u32 bitrate_mode; + u32 stream_type; /* V4L2_MPEG_STREAM_TYPE_MPEG2_TS */ + + u32 audio_sampling_freq; + u32 ctl_mute; + u32 ctl_aspect; + u32 refdist; + u32 gop_size; +}; + +struct saa7164_port; + +struct saa7164_buffer { + struct list_head list; + + /* Note of which h/w buffer list index position we occupy */ + int idx; + + struct saa7164_port *port; + + /* Hardware Specific */ + /* PCI Memory allocations */ + enum saa7164_buffer_flags flags; /* Free, Busy, Full */ + + /* A block of page align PCI memory */ + u32 pci_size; /* PCI allocation size in bytes */ + u64 __iomem *cpu; /* Virtual address */ + dma_addr_t dma; /* Physical address */ + u32 crc; /* Checksum for the entire buffer data */ + + /* A page table that splits the block into a number of entries */ + u32 pt_size; /* PCI allocation size in bytes */ + u64 __iomem *pt_cpu; /* Virtual address */ + dma_addr_t pt_dma; /* Physical address */ + + /* Encoder fops */ + u32 pos; + u32 actual_size; +}; + +struct saa7164_port { + + struct saa7164_dev *dev; + enum port_t type; + int nr; + + /* --- Generic port attributes --- */ + + /* HW stream parameters */ + struct tmHWStreamParameters hw_streamingparams; + + /* DMA configuration values, is seeded during initialization */ + struct tmComResDMATermDescrHeader hwcfg; + + /* hardware specific registers */ + u32 bufcounter; + u32 pitch; + u32 bufsize; + u32 bufoffset; + u32 bufptr32l; + u32 bufptr32h; + u64 bufptr64; + + u32 numpte; /* Number of entries in array, only valid in head */ + + struct mutex dmaqueue_lock; + struct saa7164_buffer dmaqueue; + + u64 last_irq_msecs, last_svc_msecs; + u64 last_irq_msecs_diff, last_svc_msecs_diff; + u32 last_svc_wp; + u32 last_svc_rp; + u64 last_irq_svc_msecs_diff; + u64 last_read_msecs, last_read_msecs_diff; + u64 last_poll_msecs, last_poll_msecs_diff; + + struct saa7164_histogram irq_interval; + struct saa7164_histogram svc_interval; + struct saa7164_histogram irq_svc_interval; + struct saa7164_histogram read_interval; + struct saa7164_histogram poll_interval; + + /* --- DVB Transport Specific --- */ + struct saa7164_dvb dvb; + + /* --- Encoder/V4L related attributes --- */ + /* Encoder */ + /* Defaults established in saa7164-encoder.c */ + struct saa7164_tvnorm encodernorm; + u32 height; + u32 width; + u32 freq; + u32 ts_packet_size; + u32 ts_packet_count; + u8 mux_input; + u8 encoder_profile; + u8 video_format; + u8 audio_format; + u8 video_resolution; + u16 ctl_brightness; + u16 ctl_contrast; + u16 ctl_hue; + u16 ctl_saturation; + u16 ctl_sharpness; + s8 ctl_volume; + + struct tmComResAFeatureDescrHeader audfeat; + struct tmComResEncoderDescrHeader encunit; + struct tmComResProcDescrHeader vidproc; + struct tmComResExtDevDescrHeader ifunit; + struct tmComResTunerDescrHeader tunerunit; + + struct work_struct workenc; + + /* V4L Encoder Video */ + struct saa7164_encoder_params encoder_params; + struct video_device *v4l_device; + atomic_t v4l_reader_count; + + struct saa7164_buffer list_buf_used; + struct saa7164_buffer list_buf_free; + wait_queue_head_t wait_read; + + /* V4L VBI */ + struct tmComResVBIFormatDescrHeader vbi_fmt_ntsc; + struct saa7164_vbi_params vbi_params; + + /* Debug */ + u32 sync_errors; + u32 v_cc_errors; + u32 a_cc_errors; + u8 last_v_cc; + u8 last_a_cc; + u32 done_first_interrupt; +}; + +struct saa7164_dev { + struct list_head devlist; + atomic_t refcount; + + /* pci stuff */ + struct pci_dev *pci; + unsigned char pci_rev, pci_lat; + int pci_bus, pci_slot; + u32 __iomem *lmmio; + u8 __iomem *bmmio; + u32 __iomem *lmmio2; + u8 __iomem *bmmio2; + int pci_irqmask; + + /* board details */ + int nr; + int hwrevision; + u32 board; + char name[16]; + + /* firmware status */ + struct saa7164_fw_status fw_status; + u32 firmwareloaded; + + struct tmComResHWDescr hwdesc; + struct tmComResInterfaceDescr intfdesc; + struct tmComResBusDescr busdesc; + + struct tmComResBusInfo bus; + + /* Interrupt status and ack registers */ + u32 int_status; + u32 int_ack; + + struct cmd cmds[SAA_CMD_MAX_MSG_UNITS]; + struct mutex lock; + + /* I2c related */ + struct saa7164_i2c i2c_bus[3]; + + /* Transport related */ + struct saa7164_port ports[SAA7164_MAX_PORTS]; + + /* Deferred command/api interrupts handling */ + struct work_struct workcmd; + + /* A kernel thread to monitor the firmware log, used + * only in debug mode. + */ + struct task_struct *kthread; + +}; + +extern struct list_head saa7164_devlist; +extern unsigned int waitsecs; +extern unsigned int encoder_buffers; +extern unsigned int vbi_buffers; + +/* ----------------------------------------------------------- */ +/* saa7164-core.c */ +void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr); +void saa7164_getfirmwarestatus(struct saa7164_dev *dev); +u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev); +void saa7164_histogram_update(struct saa7164_histogram *hg, u32 val); + +/* ----------------------------------------------------------- */ +/* saa7164-fw.c */ +int saa7164_downloadfirmware(struct saa7164_dev *dev); + +/* ----------------------------------------------------------- */ +/* saa7164-i2c.c */ +extern int saa7164_i2c_register(struct saa7164_i2c *bus); +extern int saa7164_i2c_unregister(struct saa7164_i2c *bus); +extern void saa7164_call_i2c_clients(struct saa7164_i2c *bus, + unsigned int cmd, void *arg); + +/* ----------------------------------------------------------- */ +/* saa7164-bus.c */ +int saa7164_bus_setup(struct saa7164_dev *dev); +void saa7164_bus_dump(struct saa7164_dev *dev); +int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg, + void *buf); +int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg, + void *buf, int peekonly); + +/* ----------------------------------------------------------- */ +/* saa7164-cmd.c */ +int saa7164_cmd_send(struct saa7164_dev *dev, + u8 id, enum tmComResCmd command, u16 controlselector, + u16 size, void *buf); +void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno); +int saa7164_irq_dequeue(struct saa7164_dev *dev); + +/* ----------------------------------------------------------- */ +/* saa7164-api.c */ +int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version); +int saa7164_api_enum_subdevs(struct saa7164_dev *dev); +int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, + u32 datalen, u8 *data); +int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, + u32 datalen, u8 *data); +int saa7164_api_dif_write(struct saa7164_i2c *bus, u8 addr, + u32 datalen, u8 *data); +int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen); +int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin); +int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin); +int saa7164_api_transition_port(struct saa7164_port *port, u8 mode); +int saa7164_api_initialize_dif(struct saa7164_port *port); +int saa7164_api_configure_dif(struct saa7164_port *port, u32 std); +int saa7164_api_set_encoder(struct saa7164_port *port); +int saa7164_api_get_encoder(struct saa7164_port *port); +int saa7164_api_set_aspect_ratio(struct saa7164_port *port); +int saa7164_api_set_usercontrol(struct saa7164_port *port, u8 ctl); +int saa7164_api_get_usercontrol(struct saa7164_port *port, u8 ctl); +int saa7164_api_set_videomux(struct saa7164_port *port); +int saa7164_api_audio_mute(struct saa7164_port *port, int mute); +int saa7164_api_set_audio_volume(struct saa7164_port *port, s8 level); +int saa7164_api_set_audio_std(struct saa7164_port *port); +int saa7164_api_set_audio_detection(struct saa7164_port *port, int autodetect); +int saa7164_api_get_videomux(struct saa7164_port *port); +int saa7164_api_set_vbi_format(struct saa7164_port *port); +int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level); +int saa7164_api_collect_debug(struct saa7164_dev *dev); +int saa7164_api_get_load_info(struct saa7164_dev *dev, + struct tmFwInfoStruct *i); + +/* ----------------------------------------------------------- */ +/* saa7164-cards.c */ +extern struct saa7164_board saa7164_boards[]; +extern const unsigned int saa7164_bcount; + +extern struct saa7164_subid saa7164_subids[]; +extern const unsigned int saa7164_idcount; + +extern void saa7164_card_list(struct saa7164_dev *dev); +extern void saa7164_gpio_setup(struct saa7164_dev *dev); +extern void saa7164_card_setup(struct saa7164_dev *dev); + +extern int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr); +extern int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr); +extern char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid); + +/* ----------------------------------------------------------- */ +/* saa7164-dvb.c */ +extern int saa7164_dvb_register(struct saa7164_port *port); +extern int saa7164_dvb_unregister(struct saa7164_port *port); + +/* ----------------------------------------------------------- */ +/* saa7164-buffer.c */ +extern struct saa7164_buffer *saa7164_buffer_alloc( + struct saa7164_port *port, u32 len); +extern int saa7164_buffer_dealloc(struct saa7164_buffer *buf); +extern void saa7164_buffer_display(struct saa7164_buffer *buf); +extern int saa7164_buffer_activate(struct saa7164_buffer *buf, int i); +extern int saa7164_buffer_cfg_port(struct saa7164_port *port); +extern struct saa7164_user_buffer *saa7164_buffer_alloc_user( + struct saa7164_dev *dev, u32 len); +extern void saa7164_buffer_dealloc_user(struct saa7164_user_buffer *buf); +extern int saa7164_buffer_zero_offsets(struct saa7164_port *port, int i); + +/* ----------------------------------------------------------- */ +/* saa7164-encoder.c */ +int saa7164_encoder_register(struct saa7164_port *port); +void saa7164_encoder_unregister(struct saa7164_port *port); + +/* ----------------------------------------------------------- */ +/* saa7164-vbi.c */ +int saa7164_vbi_register(struct saa7164_port *port); +void saa7164_vbi_unregister(struct saa7164_port *port); + +/* ----------------------------------------------------------- */ + +extern unsigned int crc_checking; + +extern unsigned int saa_debug; +#define dprintk(level, fmt, arg...)\ + do { if (saa_debug & level)\ + printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ + } while (0) + +#define log_warn(fmt, arg...)\ + do { \ + printk(KERN_WARNING "%s: " fmt, dev->name, ## arg);\ + } while (0) + +#define saa7164_readl(reg) readl(dev->lmmio + ((reg) >> 2)) +#define saa7164_writel(reg, value) writel((value), dev->lmmio + ((reg) >> 2)) + +#define saa7164_readb(reg) readl(dev->bmmio + (reg)) +#define saa7164_writeb(reg, value) writel((value), dev->bmmio + (reg)) + diff --git a/drivers/media/pci/sta2x11/Kconfig b/drivers/media/pci/sta2x11/Kconfig new file mode 100644 index 00000000..03130157 --- /dev/null +++ b/drivers/media/pci/sta2x11/Kconfig @@ -0,0 +1,13 @@ +config STA2X11_VIP + tristate "STA2X11 VIP Video For Linux" + depends on STA2X11 + select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT + select VIDEOBUF2_DMA_CONTIG + depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS + depends on I2C + help + Say Y for support for STA2X11 VIP (Video Input Port) capture + device. + + To compile this driver as a module, choose M here: the + module will be called sta2x11_vip. diff --git a/drivers/media/pci/sta2x11/Makefile b/drivers/media/pci/sta2x11/Makefile new file mode 100644 index 00000000..d6c471d1 --- /dev/null +++ b/drivers/media/pci/sta2x11/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_STA2X11_VIP) += sta2x11_vip.o diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c new file mode 100644 index 00000000..7005695a --- /dev/null +++ b/drivers/media/pci/sta2x11/sta2x11_vip.c @@ -0,0 +1,1343 @@ +/* + * This is the driver for the STA2x11 Video Input Port. + * + * Copyright (C) 2012 ST Microelectronics + * author: Federico Vaga + * Copyright (C) 2010 WindRiver Systems, Inc. + * authors: Andreas Kies + * Vlad Lungu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sta2x11_vip.h" + +#define DRV_VERSION "1.3" + +#ifndef PCI_DEVICE_ID_STMICRO_VIP +#define PCI_DEVICE_ID_STMICRO_VIP 0xCC0D +#endif + +#define MAX_FRAMES 4 + +/*Register offsets*/ +#define DVP_CTL 0x00 +#define DVP_TFO 0x04 +#define DVP_TFS 0x08 +#define DVP_BFO 0x0C +#define DVP_BFS 0x10 +#define DVP_VTP 0x14 +#define DVP_VBP 0x18 +#define DVP_VMP 0x1C +#define DVP_ITM 0x98 +#define DVP_ITS 0x9C +#define DVP_STA 0xA0 +#define DVP_HLFLN 0xA8 +#define DVP_RGB 0xC0 +#define DVP_PKZ 0xF0 + +/*Register fields*/ +#define DVP_CTL_ENA 0x00000001 +#define DVP_CTL_RST 0x80000000 +#define DVP_CTL_DIS (~0x00040001) + +#define DVP_IT_VSB 0x00000008 +#define DVP_IT_VST 0x00000010 +#define DVP_IT_FIFO 0x00000020 + +#define DVP_HLFLN_SD 0x00000001 + +#define SAVE_COUNT 8 +#define AUX_COUNT 3 +#define IRQ_COUNT 1 + + +struct vip_buffer { + struct vb2_buffer vb; + struct list_head list; + dma_addr_t dma; +}; +static inline struct vip_buffer *to_vip_buffer(struct vb2_buffer *vb2) +{ + return container_of(vb2, struct vip_buffer, vb); +} + +/** + * struct sta2x11_vip - All internal data for one instance of device + * @v4l2_dev: device registered in v4l layer + * @video_dev: properties of our device + * @pdev: PCI device + * @adapter: contains I2C adapter information + * @register_save_area: All relevant register are saved here during suspend + * @decoder: contains information about video DAC + * @ctrl_hdl: handler for control framework + * @format: pixel format, fixed UYVY + * @std: video standard (e.g. PAL/NTSC) + * @input: input line for video signal ( 0 or 1 ) + * @disabled: Device is in power down state + * @slock: for excluse acces of registers + * @alloc_ctx: context for videobuf2 + * @vb_vidq: queue maintained by videobuf2 layer + * @buffer_list: list of buffer in use + * @sequence: sequence number of acquired buffer + * @active: current active buffer + * @lock: used in videobuf2 callback + * @tcount: Number of top frames + * @bcount: Number of bottom frames + * @overflow: Number of FIFO overflows + * @iomem: hardware base address + * @config: I2C and gpio config from platform + * + * All non-local data is accessed via this structure. + */ +struct sta2x11_vip { + struct v4l2_device v4l2_dev; + struct video_device *video_dev; + struct pci_dev *pdev; + struct i2c_adapter *adapter; + unsigned int register_save_area[IRQ_COUNT + SAVE_COUNT + AUX_COUNT]; + struct v4l2_subdev *decoder; + struct v4l2_ctrl_handler ctrl_hdl; + + + struct v4l2_pix_format format; + v4l2_std_id std; + unsigned int input; + int disabled; + spinlock_t slock; + + struct vb2_alloc_ctx *alloc_ctx; + struct vb2_queue vb_vidq; + struct list_head buffer_list; + unsigned int sequence; + struct vip_buffer *active; /* current active buffer */ + spinlock_t lock; /* Used in videobuf2 callback */ + + /* Interrupt counters */ + int tcount, bcount; + int overflow; + + void *iomem; /* I/O Memory */ + struct vip_config *config; +}; + +static const unsigned int registers_to_save[AUX_COUNT] = { + DVP_HLFLN, DVP_RGB, DVP_PKZ +}; + +static struct v4l2_pix_format formats_50[] = { + { /*PAL interlaced */ + .width = 720, + .height = 576, + .pixelformat = V4L2_PIX_FMT_UYVY, + .field = V4L2_FIELD_INTERLACED, + .bytesperline = 720 * 2, + .sizeimage = 720 * 2 * 576, + .colorspace = V4L2_COLORSPACE_SMPTE170M}, + { /*PAL top */ + .width = 720, + .height = 288, + .pixelformat = V4L2_PIX_FMT_UYVY, + .field = V4L2_FIELD_TOP, + .bytesperline = 720 * 2, + .sizeimage = 720 * 2 * 288, + .colorspace = V4L2_COLORSPACE_SMPTE170M}, + { /*PAL bottom */ + .width = 720, + .height = 288, + .pixelformat = V4L2_PIX_FMT_UYVY, + .field = V4L2_FIELD_BOTTOM, + .bytesperline = 720 * 2, + .sizeimage = 720 * 2 * 288, + .colorspace = V4L2_COLORSPACE_SMPTE170M}, + +}; + +static struct v4l2_pix_format formats_60[] = { + { /*NTSC interlaced */ + .width = 720, + .height = 480, + .pixelformat = V4L2_PIX_FMT_UYVY, + .field = V4L2_FIELD_INTERLACED, + .bytesperline = 720 * 2, + .sizeimage = 720 * 2 * 480, + .colorspace = V4L2_COLORSPACE_SMPTE170M}, + { /*NTSC top */ + .width = 720, + .height = 240, + .pixelformat = V4L2_PIX_FMT_UYVY, + .field = V4L2_FIELD_TOP, + .bytesperline = 720 * 2, + .sizeimage = 720 * 2 * 240, + .colorspace = V4L2_COLORSPACE_SMPTE170M}, + { /*NTSC bottom */ + .width = 720, + .height = 240, + .pixelformat = V4L2_PIX_FMT_UYVY, + .field = V4L2_FIELD_BOTTOM, + .bytesperline = 720 * 2, + .sizeimage = 720 * 2 * 240, + .colorspace = V4L2_COLORSPACE_SMPTE170M}, +}; + +/* Write VIP register */ +static inline void reg_write(struct sta2x11_vip *vip, unsigned int reg, u32 val) +{ + iowrite32((val), (vip->iomem)+(reg)); +} +/* Read VIP register */ +static inline u32 reg_read(struct sta2x11_vip *vip, unsigned int reg) +{ + return ioread32((vip->iomem)+(reg)); +} +/* Start DMA acquisition */ +static void start_dma(struct sta2x11_vip *vip, struct vip_buffer *vip_buf) +{ + unsigned long offset = 0; + + if (vip->format.field == V4L2_FIELD_INTERLACED) + offset = vip->format.width * 2; + + spin_lock_irq(&vip->slock); + /* Enable acquisition */ + reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) | DVP_CTL_ENA); + /* Set Top and Bottom Field memory address */ + reg_write(vip, DVP_VTP, (u32)vip_buf->dma); + reg_write(vip, DVP_VBP, (u32)vip_buf->dma + offset); + spin_unlock_irq(&vip->slock); +} + +/* Fetch the next buffer to activate */ +static void vip_active_buf_next(struct sta2x11_vip *vip) +{ + /* Get the next buffer */ + spin_lock(&vip->lock); + if (list_empty(&vip->buffer_list)) {/* No available buffer */ + spin_unlock(&vip->lock); + return; + } + vip->active = list_first_entry(&vip->buffer_list, + struct vip_buffer, + list); + /* Reset Top and Bottom counter */ + vip->tcount = 0; + vip->bcount = 0; + spin_unlock(&vip->lock); + if (vb2_is_streaming(&vip->vb_vidq)) { /* streaming is on */ + start_dma(vip, vip->active); /* start dma capture */ + } +} + + +/* Videobuf2 Operations */ +static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct sta2x11_vip *vip = vb2_get_drv_priv(vq); + + if (!(*nbuffers) || *nbuffers < MAX_FRAMES) + *nbuffers = MAX_FRAMES; + + *nplanes = 1; + sizes[0] = vip->format.sizeimage; + alloc_ctxs[0] = vip->alloc_ctx; + + vip->sequence = 0; + vip->active = NULL; + vip->tcount = 0; + vip->bcount = 0; + + return 0; +}; +static int buffer_init(struct vb2_buffer *vb) +{ + struct vip_buffer *vip_buf = to_vip_buffer(vb); + + vip_buf->dma = vb2_dma_contig_plane_dma_addr(vb, 0); + INIT_LIST_HEAD(&vip_buf->list); + return 0; +} + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue); + struct vip_buffer *vip_buf = to_vip_buffer(vb); + unsigned long size; + + size = vip->format.sizeimage; + if (vb2_plane_size(vb, 0) < size) { + v4l2_err(&vip->v4l2_dev, "buffer too small (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(&vip_buf->vb, 0, size); + + return 0; +} +static void buffer_queue(struct vb2_buffer *vb) +{ + struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue); + struct vip_buffer *vip_buf = to_vip_buffer(vb); + + spin_lock(&vip->lock); + list_add_tail(&vip_buf->list, &vip->buffer_list); + if (!vip->active) { /* No active buffer, active the first one */ + vip->active = list_first_entry(&vip->buffer_list, + struct vip_buffer, + list); + if (vb2_is_streaming(&vip->vb_vidq)) /* streaming is on */ + start_dma(vip, vip_buf); /* start dma capture */ + } + spin_unlock(&vip->lock); +} +static int buffer_finish(struct vb2_buffer *vb) +{ + struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue); + struct vip_buffer *vip_buf = to_vip_buffer(vb); + + /* Buffer handled, remove it from the list */ + spin_lock(&vip->lock); + list_del_init(&vip_buf->list); + spin_unlock(&vip->lock); + + vip_active_buf_next(vip); + + return 0; +} + +static int start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct sta2x11_vip *vip = vb2_get_drv_priv(vq); + + spin_lock_irq(&vip->slock); + /* Enable interrupt VSYNC Top and Bottom*/ + reg_write(vip, DVP_ITM, DVP_IT_VSB | DVP_IT_VST); + spin_unlock_irq(&vip->slock); + + if (count) + start_dma(vip, vip->active); + + return 0; +} + +/* abort streaming and wait for last buffer */ +static int stop_streaming(struct vb2_queue *vq) +{ + struct sta2x11_vip *vip = vb2_get_drv_priv(vq); + struct vip_buffer *vip_buf, *node; + + /* Disable acquisition */ + reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA); + /* Disable all interrupts */ + reg_write(vip, DVP_ITM, 0); + + /* Release all active buffers */ + spin_lock(&vip->lock); + list_for_each_entry_safe(vip_buf, node, &vip->buffer_list, list) { + vb2_buffer_done(&vip_buf->vb, VB2_BUF_STATE_ERROR); + list_del(&vip_buf->list); + } + spin_unlock(&vip->lock); + return 0; +} + +static struct vb2_ops vip_video_qops = { + .queue_setup = queue_setup, + .buf_init = buffer_init, + .buf_prepare = buffer_prepare, + .buf_finish = buffer_finish, + .buf_queue = buffer_queue, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, +}; + + +/* File Operations */ +static const struct v4l2_file_operations vip_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .unlocked_ioctl = video_ioctl2, + .read = vb2_fop_read, + .mmap = vb2_fop_mmap, + .poll = vb2_fop_poll +}; + + +/** + * vidioc_querycap - return capabilities of device + * @file: descriptor of device + * @cap: contains return values + * + * the capabilities of the device are returned + * + * return value: 0, no error. + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct sta2x11_vip *vip = video_drvdata(file); + + strcpy(cap->driver, KBUILD_MODNAME); + strcpy(cap->card, KBUILD_MODNAME); + snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", + pci_name(vip->pdev)); + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + + return 0; +} + +/** + * vidioc_s_std - set video standard + * @file: descriptor of device + * @std: contains standard to be set + * + * the video standard is set + * + * return value: 0, no error. + * + * -EIO, no input signal detected + * + * other, returned from video DAC. + */ +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id std) +{ + struct sta2x11_vip *vip = video_drvdata(file); + v4l2_std_id oldstd = vip->std, newstd; + int status; + + if (V4L2_STD_ALL == std) { + v4l2_subdev_call(vip->decoder, core, s_std, std); + ssleep(2); + v4l2_subdev_call(vip->decoder, video, querystd, &newstd); + v4l2_subdev_call(vip->decoder, video, g_input_status, &status); + if (status & V4L2_IN_ST_NO_SIGNAL) + return -EIO; + std = vip->std = newstd; + if (oldstd != std) { + if (V4L2_STD_525_60 & std) + vip->format = formats_60[0]; + else + vip->format = formats_50[0]; + } + return 0; + } + + if (oldstd != std) { + if (V4L2_STD_525_60 & std) + vip->format = formats_60[0]; + else + vip->format = formats_50[0]; + } + + return v4l2_subdev_call(vip->decoder, core, s_std, std); +} + +/** + * vidioc_g_std - get video standard + * @file: descriptor of device + * @std: contains return values + * + * the current video standard is returned + * + * return value: 0, no error. + */ +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct sta2x11_vip *vip = video_drvdata(file); + + *std = vip->std; + return 0; +} + +/** + * vidioc_querystd - get possible video standards + * @file: descriptor of device + * @std: contains return values + * + * all possible video standards are returned + * + * return value: delivered by video DAC routine. + */ +static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std) +{ + struct sta2x11_vip *vip = video_drvdata(file); + + return v4l2_subdev_call(vip->decoder, video, querystd, std); +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + if (inp->index > 1) + return -EINVAL; + + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = V4L2_STD_ALL; + sprintf(inp->name, "Camera %u", inp->index); + + return 0; +} + +/** + * vidioc_s_input - set input line + * @file: descriptor of device + * @i: new input line number + * + * the current active input line is set + * + * return value: 0, no error. + * + * -EINVAL, line number out of range + */ +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct sta2x11_vip *vip = video_drvdata(file); + int ret; + + if (i > 1) + return -EINVAL; + ret = v4l2_subdev_call(vip->decoder, video, s_routing, i, 0, 0); + + if (!ret) + vip->input = i; + + return 0; +} + +/** + * vidioc_g_input - return input line + * @file: descriptor of device + * @i: returned input line number + * + * the current active input line is returned + * + * return value: always 0. + */ +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct sta2x11_vip *vip = video_drvdata(file); + + *i = vip->input; + return 0; +} + +/** + * vidioc_enum_fmt_vid_cap - return video capture format + * @f: returned format information + * + * returns name and format of video capture + * Only UYVY is supported by hardware. + * + * return value: always 0. + */ +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + + if (f->index != 0) + return -EINVAL; + + strcpy(f->description, "4:2:2, packed, UYVY"); + f->pixelformat = V4L2_PIX_FMT_UYVY; + f->flags = 0; + return 0; +} + +/** + * vidioc_try_fmt_vid_cap - set video capture format + * @file: descriptor of device + * @f: new format + * + * new video format is set which includes width and + * field type. width is fixed to 720, no scaling. + * Only UYVY is supported by this hardware. + * the minimum height is 200, the maximum is 576 (PAL) + * + * return value: 0, no error + * + * -EINVAL, pixel or field format not supported + * + */ +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct sta2x11_vip *vip = video_drvdata(file); + int interlace_lim; + + if (V4L2_PIX_FMT_UYVY != f->fmt.pix.pixelformat) { + v4l2_warn(&vip->v4l2_dev, "Invalid format, only UYVY supported\n"); + return -EINVAL; + } + + if (V4L2_STD_525_60 & vip->std) + interlace_lim = 240; + else + interlace_lim = 288; + + switch (f->fmt.pix.field) { + default: + case V4L2_FIELD_ANY: + if (interlace_lim < f->fmt.pix.height) + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + else + f->fmt.pix.field = V4L2_FIELD_BOTTOM; + break; + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + if (interlace_lim < f->fmt.pix.height) + f->fmt.pix.height = interlace_lim; + break; + case V4L2_FIELD_INTERLACED: + break; + } + + /* It is the only supported format */ + f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; + f->fmt.pix.height &= ~1; + if (2 * interlace_lim < f->fmt.pix.height) + f->fmt.pix.height = 2 * interlace_lim; + if (200 > f->fmt.pix.height) + f->fmt.pix.height = 200; + f->fmt.pix.width = 720; + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.width * 2 * f->fmt.pix.height; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + f->fmt.pix.priv = 0; + return 0; +} + +/** + * vidioc_s_fmt_vid_cap - set current video format parameters + * @file: descriptor of device + * @f: returned format information + * + * set new capture format + * return value: 0, no error + * + * other, delivered by video DAC routine. + */ +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct sta2x11_vip *vip = video_drvdata(file); + unsigned int t_stop, b_stop, pitch; + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + + if (vb2_is_busy(&vip->vb_vidq)) { + /* Can't change format during acquisition */ + v4l2_err(&vip->v4l2_dev, "device busy\n"); + return -EBUSY; + } + vip->format = f->fmt.pix; + switch (vip->format.field) { + case V4L2_FIELD_INTERLACED: + t_stop = ((vip->format.height / 2 - 1) << 16) | + (2 * vip->format.width - 1); + b_stop = t_stop; + pitch = 4 * vip->format.width; + break; + case V4L2_FIELD_TOP: + t_stop = ((vip->format.height - 1) << 16) | + (2 * vip->format.width - 1); + b_stop = (0 << 16) | (2 * vip->format.width - 1); + pitch = 2 * vip->format.width; + break; + case V4L2_FIELD_BOTTOM: + t_stop = (0 << 16) | (2 * vip->format.width - 1); + b_stop = (vip->format.height << 16) | + (2 * vip->format.width - 1); + pitch = 2 * vip->format.width; + break; + default: + v4l2_err(&vip->v4l2_dev, "unknown field format\n"); + return -EINVAL; + } + + spin_lock_irq(&vip->slock); + /* Y-X Top Field Offset */ + reg_write(vip, DVP_TFO, 0); + /* Y-X Bottom Field Offset */ + reg_write(vip, DVP_BFO, 0); + /* Y-X Top Field Stop*/ + reg_write(vip, DVP_TFS, t_stop); + /* Y-X Bottom Field Stop */ + reg_write(vip, DVP_BFS, b_stop); + /* Video Memory Pitch */ + reg_write(vip, DVP_VMP, pitch); + spin_unlock_irq(&vip->slock); + + return 0; +} + +/** + * vidioc_g_fmt_vid_cap - get current video format parameters + * @file: descriptor of device + * @f: contains format information + * + * returns current video format parameters + * + * return value: 0, always successful + */ +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct sta2x11_vip *vip = video_drvdata(file); + + f->fmt.pix = vip->format; + + return 0; +} + +static const struct v4l2_ioctl_ops vip_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + /* FMT handling */ + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + /* Buffer handlers */ + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + /* Stream on/off */ + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + /* Standard handling */ + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_querystd = vidioc_querystd, + /* Input handling */ + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + /* Log status ioctl */ + .vidioc_log_status = v4l2_ctrl_log_status, + /* Event handling */ + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static struct video_device video_dev_template = { + .name = KBUILD_MODNAME, + .release = video_device_release, + .fops = &vip_fops, + .ioctl_ops = &vip_ioctl_ops, + .tvnorms = V4L2_STD_ALL, +}; + +/** + * vip_irq - interrupt routine + * @irq: Number of interrupt ( not used, correct number is assumed ) + * @vip: local data structure containing all information + * + * check for both frame interrupts set ( top and bottom ). + * check FIFO overflow, but limit number of log messages after open. + * signal a complete buffer if done + * + * return value: IRQ_NONE, interrupt was not generated by VIP + * + * IRQ_HANDLED, interrupt done. + */ +static irqreturn_t vip_irq(int irq, struct sta2x11_vip *vip) +{ + unsigned int status; + + status = reg_read(vip, DVP_ITS); + + if (!status) /* No interrupt to handle */ + return IRQ_NONE; + + if (status & DVP_IT_FIFO) + if (vip->overflow++ > 5) + pr_info("VIP: fifo overflow\n"); + + if ((status & DVP_IT_VST) && (status & DVP_IT_VSB)) { + /* this is bad, we are too slow, hope the condition is gone + * on the next frame */ + return IRQ_HANDLED; + } + + if (status & DVP_IT_VST) + if ((++vip->tcount) < 2) + return IRQ_HANDLED; + if (status & DVP_IT_VSB) { + vip->bcount++; + return IRQ_HANDLED; + } + + if (vip->active) { /* Acquisition is over on this buffer */ + /* Disable acquisition */ + reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA); + /* Remove the active buffer from the list */ + do_gettimeofday(&vip->active->vb.v4l2_buf.timestamp); + vip->active->vb.v4l2_buf.sequence = vip->sequence++; + vb2_buffer_done(&vip->active->vb, VB2_BUF_STATE_DONE); + } + + return IRQ_HANDLED; +} + +static void sta2x11_vip_init_register(struct sta2x11_vip *vip) +{ + /* Register initialization */ + spin_lock_irq(&vip->slock); + /* Clean interrupt */ + reg_read(vip, DVP_ITS); + /* Enable Half Line per vertical */ + reg_write(vip, DVP_HLFLN, DVP_HLFLN_SD); + /* Reset VIP control */ + reg_write(vip, DVP_CTL, DVP_CTL_RST); + /* Clear VIP control */ + reg_write(vip, DVP_CTL, 0); + spin_unlock_irq(&vip->slock); +} +static void sta2x11_vip_clear_register(struct sta2x11_vip *vip) +{ + spin_lock_irq(&vip->slock); + /* Disable interrupt */ + reg_write(vip, DVP_ITM, 0); + /* Reset VIP Control */ + reg_write(vip, DVP_CTL, DVP_CTL_RST); + /* Clear VIP Control */ + reg_write(vip, DVP_CTL, 0); + /* Clean VIP Interrupt */ + reg_read(vip, DVP_ITS); + spin_unlock_irq(&vip->slock); +} +static int sta2x11_vip_init_buffer(struct sta2x11_vip *vip) +{ + int err; + + err = dma_set_coherent_mask(&vip->pdev->dev, DMA_BIT_MASK(29)); + if (err) { + v4l2_err(&vip->v4l2_dev, "Cannot configure coherent mask"); + return err; + } + memset(&vip->vb_vidq, 0, sizeof(struct vb2_queue)); + vip->vb_vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + vip->vb_vidq.io_modes = VB2_MMAP | VB2_READ; + vip->vb_vidq.drv_priv = vip; + vip->vb_vidq.buf_struct_size = sizeof(struct vip_buffer); + vip->vb_vidq.ops = &vip_video_qops; + vip->vb_vidq.mem_ops = &vb2_dma_contig_memops; + err = vb2_queue_init(&vip->vb_vidq); + if (err) + return err; + INIT_LIST_HEAD(&vip->buffer_list); + spin_lock_init(&vip->lock); + + + vip->alloc_ctx = vb2_dma_contig_init_ctx(&vip->pdev->dev); + if (IS_ERR(vip->alloc_ctx)) { + v4l2_err(&vip->v4l2_dev, "Can't allocate buffer context"); + return PTR_ERR(vip->alloc_ctx); + } + + return 0; +} +static void sta2x11_vip_release_buffer(struct sta2x11_vip *vip) +{ + vb2_dma_contig_cleanup_ctx(vip->alloc_ctx); +} +static int sta2x11_vip_init_controls(struct sta2x11_vip *vip) +{ + /* + * Inititialize an empty control so VIP can inerithing controls + * from ADV7180 + */ + v4l2_ctrl_handler_init(&vip->ctrl_hdl, 0); + + vip->v4l2_dev.ctrl_handler = &vip->ctrl_hdl; + if (vip->ctrl_hdl.error) { + int err = vip->ctrl_hdl.error; + + v4l2_ctrl_handler_free(&vip->ctrl_hdl); + return err; + } + + return 0; +} + +/** + * vip_gpio_reserve - reserve gpio pin + * @dev: device + * @pin: GPIO pin number + * @dir: direction, input or output + * @name: GPIO pin name + * + */ +static int vip_gpio_reserve(struct device *dev, int pin, int dir, + const char *name) +{ + int ret; + + if (pin == -1) + return 0; + + ret = gpio_request(pin, name); + if (ret) { + dev_err(dev, "Failed to allocate pin %d (%s)\n", pin, name); + return ret; + } + + ret = gpio_direction_output(pin, dir); + if (ret) { + dev_err(dev, "Failed to set direction for pin %d (%s)\n", + pin, name); + gpio_free(pin); + return ret; + } + + ret = gpio_export(pin, false); + if (ret) { + dev_err(dev, "Failed to export pin %d (%s)\n", pin, name); + gpio_free(pin); + return ret; + } + + return 0; +} + +/** + * vip_gpio_release - release gpio pin + * @dev: device + * @pin: GPIO pin number + * @name: GPIO pin name + * + */ +static void vip_gpio_release(struct device *dev, int pin, const char *name) +{ + if (pin != -1) { + dev_dbg(dev, "releasing pin %d (%s)\n", pin, name); + gpio_unexport(pin); + gpio_free(pin); + } +} + +/** + * sta2x11_vip_init_one - init one instance of video device + * @pdev: PCI device + * @ent: (not used) + * + * allocate reset pins for DAC. + * Reset video DAC, this is done via reset line. + * allocate memory for managing device + * request interrupt + * map IO region + * register device + * find and initialize video DAC + * + * return value: 0, no error + * + * -ENOMEM, no memory + * + * -ENODEV, device could not be detected or registered + */ +static int sta2x11_vip_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int ret; + struct sta2x11_vip *vip; + struct vip_config *config; + + /* Check if hardware support 26-bit DMA */ + if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(26))) { + dev_err(&pdev->dev, "26-bit DMA addressing not available\n"); + return -EINVAL; + } + /* Enable PCI */ + ret = pci_enable_device(pdev); + if (ret) + return ret; + + /* Get VIP platform data */ + config = dev_get_platdata(&pdev->dev); + if (!config) { + dev_info(&pdev->dev, "VIP slot disabled\n"); + ret = -EINVAL; + goto disable; + } + + /* Power configuration */ + ret = vip_gpio_reserve(&pdev->dev, config->pwr_pin, 0, + config->pwr_name); + if (ret) + goto disable; + + if (config->reset_pin >= 0) { + ret = vip_gpio_reserve(&pdev->dev, config->reset_pin, 0, + config->reset_name); + if (ret) { + vip_gpio_release(&pdev->dev, config->pwr_pin, + config->pwr_name); + goto disable; + } + } + if (config->pwr_pin != -1) { + /* Datasheet says 5ms between PWR and RST */ + usleep_range(5000, 25000); + ret = gpio_direction_output(config->pwr_pin, 1); + } + + if (config->reset_pin != -1) { + /* Datasheet says 5ms between PWR and RST */ + usleep_range(5000, 25000); + ret = gpio_direction_output(config->reset_pin, 1); + } + usleep_range(5000, 25000); + + /* Allocate a new VIP instance */ + vip = kzalloc(sizeof(struct sta2x11_vip), GFP_KERNEL); + if (!vip) { + ret = -ENOMEM; + goto release_gpios; + } + vip->pdev = pdev; + vip->std = V4L2_STD_PAL; + vip->format = formats_50[0]; + vip->config = config; + + ret = sta2x11_vip_init_controls(vip); + if (ret) + goto free_mem; + if (v4l2_device_register(&pdev->dev, &vip->v4l2_dev)) + goto free_mem; + + dev_dbg(&pdev->dev, "BAR #0 at 0x%lx 0x%lx irq %d\n", + (unsigned long)pci_resource_start(pdev, 0), + (unsigned long)pci_resource_len(pdev, 0), pdev->irq); + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, KBUILD_MODNAME); + if (ret) + goto unreg; + + vip->iomem = pci_iomap(pdev, 0, 0x100); + if (!vip->iomem) { + ret = -ENOMEM; + goto release; + } + + pci_enable_msi(pdev); + + /* Initialize buffer */ + ret = sta2x11_vip_init_buffer(vip); + if (ret) + goto unmap; + + spin_lock_init(&vip->slock); + + ret = request_irq(pdev->irq, + (irq_handler_t) vip_irq, + IRQF_SHARED, KBUILD_MODNAME, vip); + if (ret) { + dev_err(&pdev->dev, "request_irq failed\n"); + ret = -ENODEV; + goto release_buf; + } + + /* Alloc, initialize and register video device */ + vip->video_dev = video_device_alloc(); + if (!vip->video_dev) { + ret = -ENOMEM; + goto release_irq; + } + + vip->video_dev = &video_dev_template; + vip->video_dev->v4l2_dev = &vip->v4l2_dev; + vip->video_dev->queue = &vip->vb_vidq; + set_bit(V4L2_FL_USE_FH_PRIO, &vip->video_dev->flags); + video_set_drvdata(vip->video_dev, vip); + + ret = video_register_device(vip->video_dev, VFL_TYPE_GRABBER, -1); + if (ret) + goto vrelease; + + /* Get ADV7180 subdevice */ + vip->adapter = i2c_get_adapter(vip->config->i2c_id); + if (!vip->adapter) { + ret = -ENODEV; + dev_err(&pdev->dev, "no I2C adapter found\n"); + goto vunreg; + } + + vip->decoder = v4l2_i2c_new_subdev(&vip->v4l2_dev, vip->adapter, + "adv7180", vip->config->i2c_addr, + NULL); + if (!vip->decoder) { + ret = -ENODEV; + dev_err(&pdev->dev, "no decoder found\n"); + goto vunreg; + } + + i2c_put_adapter(vip->adapter); + v4l2_subdev_call(vip->decoder, core, init, 0); + + sta2x11_vip_init_register(vip); + + dev_info(&pdev->dev, "STA2X11 Video Input Port (VIP) loaded\n"); + return 0; + +vunreg: + video_set_drvdata(vip->video_dev, NULL); +vrelease: + if (video_is_registered(vip->video_dev)) + video_unregister_device(vip->video_dev); + else + video_device_release(vip->video_dev); +release_irq: + free_irq(pdev->irq, vip); +release_buf: + sta2x11_vip_release_buffer(vip); + pci_disable_msi(pdev); +unmap: + vb2_queue_release(&vip->vb_vidq); + pci_iounmap(pdev, vip->iomem); +release: + pci_release_regions(pdev); +unreg: + v4l2_device_unregister(&vip->v4l2_dev); +free_mem: + kfree(vip); +release_gpios: + vip_gpio_release(&pdev->dev, config->reset_pin, config->reset_name); + vip_gpio_release(&pdev->dev, config->pwr_pin, config->pwr_name); +disable: + /* + * do not call pci_disable_device on sta2x11 because it break all + * other Bus masters on this EP + */ + return ret; +} + +/** + * sta2x11_vip_remove_one - release device + * @pdev: PCI device + * + * Undo everything done in .._init_one + * + * unregister video device + * free interrupt + * unmap ioadresses + * free memory + * free GPIO pins + */ +static void sta2x11_vip_remove_one(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); + struct sta2x11_vip *vip = + container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev); + + sta2x11_vip_clear_register(vip); + + video_set_drvdata(vip->video_dev, NULL); + video_unregister_device(vip->video_dev); + /*do not call video_device_release() here, is already done */ + free_irq(pdev->irq, vip); + pci_disable_msi(pdev); + vb2_queue_release(&vip->vb_vidq); + pci_iounmap(pdev, vip->iomem); + pci_release_regions(pdev); + + v4l2_device_unregister(&vip->v4l2_dev); + + vip_gpio_release(&pdev->dev, vip->config->pwr_pin, + vip->config->pwr_name); + vip_gpio_release(&pdev->dev, vip->config->reset_pin, + vip->config->reset_name); + + kfree(vip); + /* + * do not call pci_disable_device on sta2x11 because it break all + * other Bus masters on this EP + */ +} + +#ifdef CONFIG_PM + +/** + * sta2x11_vip_suspend - set device into power save mode + * @pdev: PCI device + * @state: new state of device + * + * all relevant registers are saved and an attempt to set a new state is made. + * + * return value: 0 always indicate success, + * even if device could not be disabled. (workaround for hardware problem) + */ +static int sta2x11_vip_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); + struct sta2x11_vip *vip = + container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev); + unsigned long flags; + int i; + + spin_lock_irqsave(&vip->slock, flags); + vip->register_save_area[0] = reg_read(vip, DVP_CTL); + reg_write(vip, DVP_CTL, vip->register_save_area[0] & DVP_CTL_DIS); + vip->register_save_area[SAVE_COUNT] = reg_read(vip, DVP_ITM); + reg_write(vip, DVP_ITM, 0); + for (i = 1; i < SAVE_COUNT; i++) + vip->register_save_area[i] = reg_read(vip, 4 * i); + for (i = 0; i < AUX_COUNT; i++) + vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i] = + reg_read(vip, registers_to_save[i]); + spin_unlock_irqrestore(&vip->slock, flags); + /* save pci state */ + pci_save_state(pdev); + if (pci_set_power_state(pdev, pci_choose_state(pdev, state))) { + /* + * do not call pci_disable_device on sta2x11 because it + * break all other Bus masters on this EP + */ + vip->disabled = 1; + } + + pr_info("VIP: suspend\n"); + return 0; +} + +/** + * sta2x11_vip_resume - resume device operation + * @pdev : PCI device + * + * re-enable device, set PCI state to powered and restore registers. + * resume normal device operation afterwards. + * + * return value: 0, no error. + * + * other, could not set device to power on state. + */ +static int sta2x11_vip_resume(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); + struct sta2x11_vip *vip = + container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev); + unsigned long flags; + int ret, i; + + pr_info("VIP: resume\n"); + /* restore pci state */ + if (vip->disabled) { + ret = pci_enable_device(pdev); + if (ret) { + pr_warn("VIP: Can't enable device.\n"); + return ret; + } + vip->disabled = 0; + } + ret = pci_set_power_state(pdev, PCI_D0); + if (ret) { + /* + * do not call pci_disable_device on sta2x11 because it + * break all other Bus masters on this EP + */ + pr_warn("VIP: Can't enable device.\n"); + vip->disabled = 1; + return ret; + } + + pci_restore_state(pdev); + + spin_lock_irqsave(&vip->slock, flags); + for (i = 1; i < SAVE_COUNT; i++) + reg_write(vip, 4 * i, vip->register_save_area[i]); + for (i = 0; i < AUX_COUNT; i++) + reg_write(vip, registers_to_save[i], + vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i]); + reg_write(vip, DVP_CTL, vip->register_save_area[0]); + reg_write(vip, DVP_ITM, vip->register_save_area[SAVE_COUNT]); + spin_unlock_irqrestore(&vip->slock, flags); + return 0; +} + +#endif + +static DEFINE_PCI_DEVICE_TABLE(sta2x11_vip_pci_tbl) = { + {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_VIP)}, + {0,} +}; + +static struct pci_driver sta2x11_vip_driver = { + .name = KBUILD_MODNAME, + .probe = sta2x11_vip_init_one, + .remove = sta2x11_vip_remove_one, + .id_table = sta2x11_vip_pci_tbl, +#ifdef CONFIG_PM + .suspend = sta2x11_vip_suspend, + .resume = sta2x11_vip_resume, +#endif +}; + +static int __init sta2x11_vip_init_module(void) +{ + return pci_register_driver(&sta2x11_vip_driver); +} + +static void __exit sta2x11_vip_exit_module(void) +{ + pci_unregister_driver(&sta2x11_vip_driver); +} + +#ifdef MODULE +module_init(sta2x11_vip_init_module); +module_exit(sta2x11_vip_exit_module); +#else +late_initcall_sync(sta2x11_vip_init_module); +#endif + +MODULE_DESCRIPTION("STA2X11 Video Input Port driver"); +MODULE_AUTHOR("Wind River"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("sta2x11 video input"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, sta2x11_vip_pci_tbl); diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.h b/drivers/media/pci/sta2x11/sta2x11_vip.h new file mode 100644 index 00000000..4f81a136 --- /dev/null +++ b/drivers/media/pci/sta2x11/sta2x11_vip.h @@ -0,0 +1,40 @@ +/* + * Copyright (c) 2011 Wind River Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Anders Wallin + * + */ + +#ifndef __STA2X11_VIP_H +#define __STA2X11_VIP_H + +/** + * struct vip_config - video input configuration data + * @pwr_name: ADV powerdown name + * @pwr_pin: ADV powerdown pin + * @reset_name: ADV reset name + * @reset_pin: ADV reset pin + */ +struct vip_config { + const char *pwr_name; + int pwr_pin; + const char *reset_name; + int reset_pin; + int i2c_id; + int i2c_addr; +}; + +#endif /* __STA2X11_VIP_H */ diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig new file mode 100644 index 00000000..0dcb8cd7 --- /dev/null +++ b/drivers/media/pci/ttpci/Kconfig @@ -0,0 +1,154 @@ +config DVB_AV7110 + tristate "AV7110 cards" + depends on DVB_CORE && PCI && I2C + select TTPCI_EEPROM + select VIDEO_SAA7146_VV + depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV + select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SP8870 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT + select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + help + Support for SAA7146 and AV7110 based DVB cards as produced + by Fujitsu-Siemens, Technotrend, Hauppauge and others. + + This driver only supports the fullfeatured cards with + onboard MPEG2 decoder. + + This driver needs an external firmware. Please use the script + "/Documentation/dvb/get_dvb_firmware av7110" to + download/extract it, and then copy it to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + + Alternatively, you can download the file and use the kernel's + EXTRA_FIRMWARE configuration option to build it into your + kernel image by adding the filename to the EXTRA_FIRMWARE + configuration option string. + + Say Y if you own such a card and want to use it. + +config DVB_AV7110_OSD + bool "AV7110 OSD support" + depends on DVB_AV7110 + default y if DVB_AV7110=y || DVB_AV7110=m + help + The AV7110 firmware provides some code to generate an OnScreenDisplay + on the video output. This is kind of nonstandard and not guaranteed to + be maintained. + + Anyway, some popular DVB software like VDR uses this OSD to render + its menus, so say Y if you want to use this software. + + All other people say N. + +config DVB_BUDGET_CORE + tristate "SAA7146 DVB cards (aka Budget, Nova-PCI)" + depends on DVB_CORE && PCI && I2C + select VIDEO_SAA7146 + select TTPCI_EEPROM + help + Support for simple SAA7146 based DVB cards + (so called Budget- or Nova-PCI cards) without onboard + MPEG2 decoder. + +config DVB_BUDGET + tristate "Budget cards" + depends on DVB_BUDGET_CORE && I2C + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT + select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + help + Support for simple SAA7146 based DVB cards (so called Budget- + or Nova-PCI cards) without onboard MPEG2 decoder, and without + analog inputs or an onboard Common Interface connector. + + Say Y if you own such a card and want to use it. + + To compile this driver as a module, choose M here: the + module will be called budget. + +config DVB_BUDGET_CI + tristate "Budget cards with onboard CI connector" + depends on DVB_BUDGET_CORE && I2C + select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT + depends on RC_CORE + help + Support for simple SAA7146 based DVB cards + (so called Budget- or Nova-PCI cards) without onboard + MPEG2 decoder, but with onboard Common Interface connector. + + Note: The Common Interface is not yet supported by this driver + due to lack of information from the vendor. + + Say Y if you own such a card and want to use it. + + To compile this driver as a module, choose M here: the + module will be called budget-ci. + +config DVB_BUDGET_AV + tristate "Budget cards with analog video inputs" + depends on DVB_BUDGET_CORE && I2C + select VIDEO_SAA7146_VV + depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8261 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUA6100 if MEDIA_SUBDRV_AUTOSELECT + help + Support for simple SAA7146 based DVB cards + (so called Budget- or Nova-PCI cards) without onboard + MPEG2 decoder, but with one or more analog video inputs. + + Say Y if you own such a card and want to use it. + + To compile this driver as a module, choose M here: the + module will be called budget-av. + +config DVB_BUDGET_PATCH + tristate "AV7110 cards with Budget Patch" + depends on DVB_BUDGET_CORE && I2C + depends on DVB_AV7110 + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT + help + Support for Budget Patch (full TS) modification on + SAA7146+AV7110 based cards (DVB-S cards). This + driver doesn't use onboard MPEG2 decoder. The + card is driven in Budget-only mode. Card is + required to have loaded firmware to tune properly. + Firmware can be loaded by insertion and removal of + standard AV7110 driver prior to loading this + driver. + + Say Y if you own such a card and want to use it. + + To compile this driver as a module, choose M here: the + module will be called budget-patch. diff --git a/drivers/media/pci/ttpci/Makefile b/drivers/media/pci/ttpci/Makefile new file mode 100644 index 00000000..98905963 --- /dev/null +++ b/drivers/media/pci/ttpci/Makefile @@ -0,0 +1,21 @@ +# +# Makefile for the kernel SAA7146 FULL TS DVB device driver +# and the AV7110 DVB device driver +# + +dvb-ttpci-objs := av7110_hw.o av7110_v4l.o av7110_av.o av7110_ca.o av7110.o av7110_ipack.o + +ifdef CONFIG_INPUT_EVDEV +dvb-ttpci-objs += av7110_ir.o +endif + +obj-$(CONFIG_TTPCI_EEPROM) += ttpci-eeprom.o +obj-$(CONFIG_DVB_BUDGET_CORE) += budget-core.o +obj-$(CONFIG_DVB_BUDGET) += budget.o +obj-$(CONFIG_DVB_BUDGET_AV) += budget-av.o +obj-$(CONFIG_DVB_BUDGET_CI) += budget-ci.o +obj-$(CONFIG_DVB_BUDGET_PATCH) += budget-patch.o +obj-$(CONFIG_DVB_AV7110) += dvb-ttpci.o + +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners diff --git a/drivers/media/pci/ttpci/av7110.c b/drivers/media/pci/ttpci/av7110.c new file mode 100644 index 00000000..f38329d2 --- /dev/null +++ b/drivers/media/pci/ttpci/av7110.c @@ -0,0 +1,2941 @@ +/* + * driver for the SAA7146 based AV110 cards (like the Fujitsu-Siemens DVB) + * av7110.c: initialization and demux stuff + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * originally based on code by: + * Copyright (C) 1998,1999 Christian Theiss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#include + +#include "dvb_frontend.h" + +#include "ttpci-eeprom.h" +#include "av7110.h" +#include "av7110_hw.h" +#include "av7110_av.h" +#include "av7110_ca.h" +#include "av7110_ipack.h" + +#include "bsbe1.h" +#include "lnbp21.h" +#include "bsru6.h" + +#define TS_WIDTH 376 +#define TS_HEIGHT 512 +#define TS_BUFLEN (TS_WIDTH*TS_HEIGHT) +#define TS_MAX_PACKETS (TS_BUFLEN/TS_SIZE) + + +int av7110_debug; + +static int vidmode = CVBS_RGB_OUT; +static int pids_off; +static int adac = DVB_ADAC_TI; +static int hw_sections; +static int rgb_on; +static int volume = 255; +static int budgetpatch; +static int wss_cfg_4_3 = 0x4008; +static int wss_cfg_16_9 = 0x0007; +static int tv_standard; +static int full_ts; + +module_param_named(debug, av7110_debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)"); +module_param(vidmode, int, 0444); +MODULE_PARM_DESC(vidmode,"analog video out: 0 off, 1 CVBS+RGB (default), 2 CVBS+YC, 3 YC"); +module_param(pids_off, int, 0444); +MODULE_PARM_DESC(pids_off,"clear video/audio/PCR PID filters when demux is closed"); +module_param(adac, int, 0444); +MODULE_PARM_DESC(adac,"audio DAC type: 0 TI, 1 CRYSTAL, 2 MSP (use if autodetection fails)"); +module_param(hw_sections, int, 0444); +MODULE_PARM_DESC(hw_sections, "0 use software section filter, 1 use hardware"); +module_param(rgb_on, int, 0444); +MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control" + " signal on SCART pin 16 to switch SCART video mode from CVBS to RGB"); +module_param(volume, int, 0444); +MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)"); +module_param(budgetpatch, int, 0444); +MODULE_PARM_DESC(budgetpatch, "use budget-patch hardware modification: default 0 (0 no, 1 autodetect, 2 always)"); +module_param(full_ts, int, 0444); +MODULE_PARM_DESC(full_ts, "enable code for full-ts hardware modification: 0 disable (default), 1 enable"); +module_param(wss_cfg_4_3, int, 0444); +MODULE_PARM_DESC(wss_cfg_4_3, "WSS 4:3 - default 0x4008 - bit 15: disable, 14: burst mode, 13..0: wss data"); +module_param(wss_cfg_16_9, int, 0444); +MODULE_PARM_DESC(wss_cfg_16_9, "WSS 16:9 - default 0x0007 - bit 15: disable, 14: burst mode, 13..0: wss data"); +module_param(tv_standard, int, 0444); +MODULE_PARM_DESC(tv_standard, "TV standard: 0 PAL (default), 1 NTSC"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static void restart_feeds(struct av7110 *av7110); +static int budget_start_feed(struct dvb_demux_feed *feed); +static int budget_stop_feed(struct dvb_demux_feed *feed); + +static int av7110_num; + +#define FE_FUNC_OVERRIDE(fe_func, av7110_copy, av7110_func) \ +{\ + if (fe_func != NULL) { \ + av7110_copy = fe_func; \ + fe_func = av7110_func; \ + } \ +} + + +static void init_av7110_av(struct av7110 *av7110) +{ + int ret; + struct saa7146_dev *dev = av7110->dev; + + /* set internal volume control to maximum */ + av7110->adac_type = DVB_ADAC_TI; + ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); + if (ret < 0) + printk("dvb-ttpci:cannot set internal volume to maximum:%d\n",ret); + + ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetMonitorType, + 1, (u16) av7110->display_ar); + if (ret < 0) + printk("dvb-ttpci: unable to set aspect ratio\n"); + ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetPanScanType, + 1, av7110->display_panscan); + if (ret < 0) + printk("dvb-ttpci: unable to set pan scan\n"); + + ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 2, wss_cfg_4_3); + if (ret < 0) + printk("dvb-ttpci: unable to configure 4:3 wss\n"); + ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 3, wss_cfg_16_9); + if (ret < 0) + printk("dvb-ttpci: unable to configure 16:9 wss\n"); + + ret = av7710_set_video_mode(av7110, vidmode); + if (ret < 0) + printk("dvb-ttpci:cannot set video mode:%d\n",ret); + + /* handle different card types */ + /* remaining inits according to card and frontend type */ + av7110->analog_tuner_flags = 0; + av7110->current_input = 0; + if (dev->pci->subsystem_vendor == 0x13c2 && dev->pci->subsystem_device == 0x000a) + av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, 0); // SPDIF on + if (i2c_writereg(av7110, 0x20, 0x00, 0x00) == 1) { + printk ("dvb-ttpci: Crystal audio DAC @ card %d detected\n", + av7110->dvb_adapter.num); + av7110->adac_type = DVB_ADAC_CRYSTAL; + i2c_writereg(av7110, 0x20, 0x01, 0xd2); + i2c_writereg(av7110, 0x20, 0x02, 0x49); + i2c_writereg(av7110, 0x20, 0x03, 0x00); + i2c_writereg(av7110, 0x20, 0x04, 0x00); + + /** + * some special handling for the Siemens DVB-C cards... + */ + } else if (0 == av7110_init_analog_module(av7110)) { + /* done. */ + } + else if (dev->pci->subsystem_vendor == 0x110a) { + printk("dvb-ttpci: DVB-C w/o analog module @ card %d detected\n", + av7110->dvb_adapter.num); + av7110->adac_type = DVB_ADAC_NONE; + } + else { + av7110->adac_type = adac; + printk("dvb-ttpci: adac type set to %d @ card %d\n", + av7110->adac_type, av7110->dvb_adapter.num); + } + + if (av7110->adac_type == DVB_ADAC_NONE || av7110->adac_type == DVB_ADAC_MSP34x0) { + // switch DVB SCART on + ret = av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, MainSwitch, 1, 0); + if (ret < 0) + printk("dvb-ttpci:cannot switch on SCART(Main):%d\n",ret); + ret = av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, 1); + if (ret < 0) + printk("dvb-ttpci:cannot switch on SCART(AD):%d\n",ret); + if (rgb_on && + ((av7110->dev->pci->subsystem_vendor == 0x110a) || + (av7110->dev->pci->subsystem_vendor == 0x13c2)) && + (av7110->dev->pci->subsystem_device == 0x0000)) { + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // RGB on, SCART pin 16 + //saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // SCARTpin 8 + } + } + + if (dev->pci->subsystem_vendor == 0x13c2 && dev->pci->subsystem_device == 0x000e) + av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, SpdifSwitch, 1, 0); // SPDIF on + + ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); + if (ret < 0) + printk("dvb-ttpci:cannot set volume :%d\n",ret); +} + +static void recover_arm(struct av7110 *av7110) +{ + dprintk(4, "%p\n",av7110); + + av7110_bootarm(av7110); + msleep(100); + + init_av7110_av(av7110); + + /* card-specific recovery */ + if (av7110->recover) + av7110->recover(av7110); + + restart_feeds(av7110); + +#if IS_ENABLED(CONFIG_INPUT_EVDEV) + av7110_check_ir_config(av7110, true); +#endif +} + +static void av7110_arm_sync(struct av7110 *av7110) +{ + if (av7110->arm_thread) + kthread_stop(av7110->arm_thread); + + av7110->arm_thread = NULL; +} + +static int arm_thread(void *data) +{ + struct av7110 *av7110 = data; + u16 newloops = 0; + int timeout; + + dprintk(4, "%p\n",av7110); + + for (;;) { + timeout = wait_event_interruptible_timeout(av7110->arm_wait, + kthread_should_stop(), 5 * HZ); + + if (-ERESTARTSYS == timeout || kthread_should_stop()) { + /* got signal or told to quit*/ + break; + } + + if (!av7110->arm_ready) + continue; + +#if IS_ENABLED(CONFIG_INPUT_EVDEV) + av7110_check_ir_config(av7110, false); +#endif + + if (mutex_lock_interruptible(&av7110->dcomlock)) + break; + newloops = rdebi(av7110, DEBINOSWAP, STATUS_LOOPS, 0, 2); + mutex_unlock(&av7110->dcomlock); + + if (newloops == av7110->arm_loops || av7110->arm_errors > 3) { + printk(KERN_ERR "dvb-ttpci: ARM crashed @ card %d\n", + av7110->dvb_adapter.num); + + recover_arm(av7110); + + if (mutex_lock_interruptible(&av7110->dcomlock)) + break; + newloops = rdebi(av7110, DEBINOSWAP, STATUS_LOOPS, 0, 2) - 1; + mutex_unlock(&av7110->dcomlock); + } + av7110->arm_loops = newloops; + av7110->arm_errors = 0; + } + + return 0; +} + + +/**************************************************************************** + * IRQ handling + ****************************************************************************/ + +static int DvbDmxFilterCallback(u8 *buffer1, size_t buffer1_len, + u8 *buffer2, size_t buffer2_len, + struct dvb_demux_filter *dvbdmxfilter, + enum dmx_success success, + struct av7110 *av7110) +{ + if (!dvbdmxfilter->feed->demux->dmx.frontend) + return 0; + if (dvbdmxfilter->feed->demux->dmx.frontend->source == DMX_MEMORY_FE) + return 0; + + switch (dvbdmxfilter->type) { + case DMX_TYPE_SEC: + if ((((buffer1[1] << 8) | buffer1[2]) & 0xfff) + 3 != buffer1_len) + return 0; + if (dvbdmxfilter->doneq) { + struct dmx_section_filter *filter = &dvbdmxfilter->filter; + int i; + u8 xor, neq = 0; + + for (i = 0; i < DVB_DEMUX_MASK_MAX; i++) { + xor = filter->filter_value[i] ^ buffer1[i]; + neq |= dvbdmxfilter->maskandnotmode[i] & xor; + } + if (!neq) + return 0; + } + return dvbdmxfilter->feed->cb.sec(buffer1, buffer1_len, + buffer2, buffer2_len, + &dvbdmxfilter->filter, + DMX_OK); + case DMX_TYPE_TS: + if (!(dvbdmxfilter->feed->ts_type & TS_PACKET)) + return 0; + if (dvbdmxfilter->feed->ts_type & TS_PAYLOAD_ONLY) + return dvbdmxfilter->feed->cb.ts(buffer1, buffer1_len, + buffer2, buffer2_len, + &dvbdmxfilter->feed->feed.ts, + DMX_OK); + else + av7110_p2t_write(buffer1, buffer1_len, + dvbdmxfilter->feed->pid, + &av7110->p2t_filter[dvbdmxfilter->index]); + default: + return 0; + } +} + + +//#define DEBUG_TIMING +static inline void print_time(char *s) +{ +#ifdef DEBUG_TIMING + struct timeval tv; + do_gettimeofday(&tv); + printk("%s: %d.%d\n", s, (int)tv.tv_sec, (int)tv.tv_usec); +#endif +} + +#define DEBI_READ 0 +#define DEBI_WRITE 1 +static inline void start_debi_dma(struct av7110 *av7110, int dir, + unsigned long addr, unsigned int len) +{ + dprintk(8, "%c %08lx %u\n", dir == DEBI_READ ? 'R' : 'W', addr, len); + if (saa7146_wait_for_debi_done(av7110->dev, 0)) { + printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __func__); + return; + } + + SAA7146_ISR_CLEAR(av7110->dev, MASK_19); /* for good measure */ + SAA7146_IER_ENABLE(av7110->dev, MASK_19); + if (len < 5) + len = 5; /* we want a real DEBI DMA */ + if (dir == DEBI_WRITE) + iwdebi(av7110, DEBISWAB, addr, 0, (len + 3) & ~3); + else + irdebi(av7110, DEBISWAB, addr, 0, len); +} + +static void debiirq(unsigned long cookie) +{ + struct av7110 *av7110 = (struct av7110 *)cookie; + int type = av7110->debitype; + int handle = (type >> 8) & 0x1f; + unsigned int xfer = 0; + + print_time("debi"); + dprintk(4, "type 0x%04x\n", type); + + if (type == -1) { + printk("DEBI irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n", + jiffies, saa7146_read(av7110->dev, PSR), + saa7146_read(av7110->dev, SSR)); + goto debi_done; + } + av7110->debitype = -1; + + switch (type & 0xff) { + + case DATA_TS_RECORD: + dvb_dmx_swfilter_packets(&av7110->demux, + (const u8 *) av7110->debi_virt, + av7110->debilen / 188); + xfer = RX_BUFF; + break; + + case DATA_PES_RECORD: + if (av7110->demux.recording) + av7110_record_cb(&av7110->p2t[handle], + (u8 *) av7110->debi_virt, + av7110->debilen); + xfer = RX_BUFF; + break; + + case DATA_IPMPE: + case DATA_FSECTION: + case DATA_PIPING: + if (av7110->handle2filter[handle]) + DvbDmxFilterCallback((u8 *)av7110->debi_virt, + av7110->debilen, NULL, 0, + av7110->handle2filter[handle], + DMX_OK, av7110); + xfer = RX_BUFF; + break; + + case DATA_CI_GET: + { + u8 *data = av7110->debi_virt; + + if ((data[0] < 2) && data[2] == 0xff) { + int flags = 0; + if (data[5] > 0) + flags |= CA_CI_MODULE_PRESENT; + if (data[5] > 5) + flags |= CA_CI_MODULE_READY; + av7110->ci_slot[data[0]].flags = flags; + } else + ci_get_data(&av7110->ci_rbuffer, + av7110->debi_virt, + av7110->debilen); + xfer = RX_BUFF; + break; + } + + case DATA_COMMON_INTERFACE: + CI_handle(av7110, (u8 *)av7110->debi_virt, av7110->debilen); +#if 0 + { + int i; + + printk("av7110%d: ", av7110->num); + printk("%02x ", *(u8 *)av7110->debi_virt); + printk("%02x ", *(1+(u8 *)av7110->debi_virt)); + for (i = 2; i < av7110->debilen; i++) + printk("%02x ", (*(i+(unsigned char *)av7110->debi_virt))); + for (i = 2; i < av7110->debilen; i++) + printk("%c", chtrans(*(i+(unsigned char *)av7110->debi_virt))); + + printk("\n"); + } +#endif + xfer = RX_BUFF; + break; + + case DATA_DEBUG_MESSAGE: + ((s8*)av7110->debi_virt)[Reserved_SIZE - 1] = 0; + printk("%s\n", (s8 *) av7110->debi_virt); + xfer = RX_BUFF; + break; + + case DATA_CI_PUT: + dprintk(4, "debi DATA_CI_PUT\n"); + case DATA_MPEG_PLAY: + dprintk(4, "debi DATA_MPEG_PLAY\n"); + case DATA_BMP_LOAD: + dprintk(4, "debi DATA_BMP_LOAD\n"); + xfer = TX_BUFF; + break; + default: + break; + } +debi_done: + spin_lock(&av7110->debilock); + if (xfer) + iwdebi(av7110, DEBINOSWAP, xfer, 0, 2); + ARM_ClearMailBox(av7110); + spin_unlock(&av7110->debilock); +} + +/* irq from av7110 firmware writing the mailbox register in the DPRAM */ +static void gpioirq(unsigned long cookie) +{ + struct av7110 *av7110 = (struct av7110 *)cookie; + u32 rxbuf, txbuf; + int len; + + if (av7110->debitype != -1) + /* we shouldn't get any irq while a debi xfer is running */ + printk("dvb-ttpci: GPIO0 irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n", + jiffies, saa7146_read(av7110->dev, PSR), + saa7146_read(av7110->dev, SSR)); + + if (saa7146_wait_for_debi_done(av7110->dev, 0)) { + printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __func__); + BUG(); /* maybe we should try resetting the debi? */ + } + + spin_lock(&av7110->debilock); + ARM_ClearIrq(av7110); + + /* see what the av7110 wants */ + av7110->debitype = irdebi(av7110, DEBINOSWAP, IRQ_STATE, 0, 2); + av7110->debilen = irdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); + rxbuf = irdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); + txbuf = irdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); + len = (av7110->debilen + 3) & ~3; + + print_time("gpio"); + dprintk(8, "GPIO0 irq 0x%04x %d\n", av7110->debitype, av7110->debilen); + + switch (av7110->debitype & 0xff) { + + case DATA_TS_PLAY: + case DATA_PES_PLAY: + break; + + case DATA_MPEG_VIDEO_EVENT: + { + u32 h_ar; + struct video_event event; + + av7110->video_size.w = irdebi(av7110, DEBINOSWAP, STATUS_MPEG_WIDTH, 0, 2); + h_ar = irdebi(av7110, DEBINOSWAP, STATUS_MPEG_HEIGHT_AR, 0, 2); + + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); + iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); + + av7110->video_size.h = h_ar & 0xfff; + + event.type = VIDEO_EVENT_SIZE_CHANGED; + event.u.size.w = av7110->video_size.w; + event.u.size.h = av7110->video_size.h; + switch ((h_ar >> 12) & 0xf) + { + case 3: + av7110->video_size.aspect_ratio = VIDEO_FORMAT_16_9; + event.u.size.aspect_ratio = VIDEO_FORMAT_16_9; + av7110->videostate.video_format = VIDEO_FORMAT_16_9; + break; + case 4: + av7110->video_size.aspect_ratio = VIDEO_FORMAT_221_1; + event.u.size.aspect_ratio = VIDEO_FORMAT_221_1; + av7110->videostate.video_format = VIDEO_FORMAT_221_1; + break; + default: + av7110->video_size.aspect_ratio = VIDEO_FORMAT_4_3; + event.u.size.aspect_ratio = VIDEO_FORMAT_4_3; + av7110->videostate.video_format = VIDEO_FORMAT_4_3; + } + + dprintk(8, "GPIO0 irq: DATA_MPEG_VIDEO_EVENT: w/h/ar = %u/%u/%u\n", + av7110->video_size.w, av7110->video_size.h, + av7110->video_size.aspect_ratio); + + dvb_video_add_event(av7110, &event); + break; + } + + case DATA_CI_PUT: + { + int avail; + struct dvb_ringbuffer *cibuf = &av7110->ci_wbuffer; + + avail = dvb_ringbuffer_avail(cibuf); + if (avail <= 2) { + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); + break; + } + len = DVB_RINGBUFFER_PEEK(cibuf, 0) << 8; + len |= DVB_RINGBUFFER_PEEK(cibuf, 1); + if (avail < len + 2) { + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); + break; + } + DVB_RINGBUFFER_SKIP(cibuf, 2); + + dvb_ringbuffer_read(cibuf, av7110->debi_virt, len); + + iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2); + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2); + dprintk(8, "DMA: CI\n"); + start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE + txbuf, len); + spin_unlock(&av7110->debilock); + wake_up(&cibuf->queue); + return; + } + + case DATA_MPEG_PLAY: + if (!av7110->playing) { + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); + break; + } + len = 0; + if (av7110->debitype & 0x100) { + spin_lock(&av7110->aout.lock); + len = av7110_pes_play(av7110->debi_virt, &av7110->aout, 2048); + spin_unlock(&av7110->aout.lock); + } + if (len <= 0 && (av7110->debitype & 0x200) + &&av7110->videostate.play_state != VIDEO_FREEZED) { + spin_lock(&av7110->avout.lock); + len = av7110_pes_play(av7110->debi_virt, &av7110->avout, 2048); + spin_unlock(&av7110->avout.lock); + } + if (len <= 0) { + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); + break; + } + dprintk(8, "GPIO0 PES_PLAY len=%04x\n", len); + iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2); + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2); + dprintk(8, "DMA: MPEG_PLAY\n"); + start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE + txbuf, len); + spin_unlock(&av7110->debilock); + return; + + case DATA_BMP_LOAD: + len = av7110->debilen; + dprintk(8, "gpio DATA_BMP_LOAD len %d\n", len); + if (!len) { + av7110->bmp_state = BMP_LOADED; + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); + iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); + wake_up(&av7110->bmpq); + dprintk(8, "gpio DATA_BMP_LOAD done\n"); + break; + } + if (len > av7110->bmplen) + len = av7110->bmplen; + if (len > 2 * 1024) + len = 2 * 1024; + iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2); + iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2); + memcpy(av7110->debi_virt, av7110->bmpbuf+av7110->bmpp, len); + av7110->bmpp += len; + av7110->bmplen -= len; + dprintk(8, "gpio DATA_BMP_LOAD DMA len %d\n", len); + start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE+txbuf, len); + spin_unlock(&av7110->debilock); + return; + + case DATA_CI_GET: + case DATA_COMMON_INTERFACE: + case DATA_FSECTION: + case DATA_IPMPE: + case DATA_PIPING: + if (!len || len > 4 * 1024) { + iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); + break; + } + /* fall through */ + + case DATA_TS_RECORD: + case DATA_PES_RECORD: + dprintk(8, "DMA: TS_REC etc.\n"); + start_debi_dma(av7110, DEBI_READ, DPRAM_BASE+rxbuf, len); + spin_unlock(&av7110->debilock); + return; + + case DATA_DEBUG_MESSAGE: + if (!len || len > 0xff) { + iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); + break; + } + start_debi_dma(av7110, DEBI_READ, Reserved, len); + spin_unlock(&av7110->debilock); + return; + + case DATA_IRCOMMAND: + if (av7110->ir.ir_handler) + av7110->ir.ir_handler(av7110, + swahw32(irdebi(av7110, DEBINOSWAP, Reserved, 0, 4))); + iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); + break; + + default: + printk("dvb-ttpci: gpioirq unknown type=%d len=%d\n", + av7110->debitype, av7110->debilen); + break; + } + av7110->debitype = -1; + ARM_ClearMailBox(av7110); + spin_unlock(&av7110->debilock); +} + + +#ifdef CONFIG_DVB_AV7110_OSD +static int dvb_osd_ioctl(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + + dprintk(4, "%p\n", av7110); + + if (cmd == OSD_SEND_CMD) + return av7110_osd_cmd(av7110, (osd_cmd_t *) parg); + if (cmd == OSD_GET_CAPABILITY) + return av7110_osd_capability(av7110, (osd_cap_t *) parg); + + return -EINVAL; +} + + +static const struct file_operations dvb_osd_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = dvb_generic_ioctl, + .open = dvb_generic_open, + .release = dvb_generic_release, + .llseek = noop_llseek, +}; + +static struct dvb_device dvbdev_osd = { + .priv = NULL, + .users = 1, + .writers = 1, + .fops = &dvb_osd_fops, + .kernel_ioctl = dvb_osd_ioctl, +}; +#endif /* CONFIG_DVB_AV7110_OSD */ + + +static inline int SetPIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, + u16 subpid, u16 pcrpid) +{ + u16 aflags = 0; + + dprintk(4, "%p\n", av7110); + + if (vpid == 0x1fff || apid == 0x1fff || + ttpid == 0x1fff || subpid == 0x1fff || pcrpid == 0x1fff) { + vpid = apid = ttpid = subpid = pcrpid = 0; + av7110->pids[DMX_PES_VIDEO] = 0; + av7110->pids[DMX_PES_AUDIO] = 0; + av7110->pids[DMX_PES_TELETEXT] = 0; + av7110->pids[DMX_PES_PCR] = 0; + } + + if (av7110->audiostate.bypass_mode) + aflags |= 0x8000; + + return av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, MultiPID, 6, + pcrpid, vpid, apid, ttpid, subpid, aflags); +} + +int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, + u16 subpid, u16 pcrpid) +{ + int ret = 0; + dprintk(4, "%p\n", av7110); + + if (mutex_lock_interruptible(&av7110->pid_mutex)) + return -ERESTARTSYS; + + if (!(vpid & 0x8000)) + av7110->pids[DMX_PES_VIDEO] = vpid; + if (!(apid & 0x8000)) + av7110->pids[DMX_PES_AUDIO] = apid; + if (!(ttpid & 0x8000)) + av7110->pids[DMX_PES_TELETEXT] = ttpid; + if (!(pcrpid & 0x8000)) + av7110->pids[DMX_PES_PCR] = pcrpid; + + av7110->pids[DMX_PES_SUBTITLE] = 0; + + if (av7110->fe_synced) { + pcrpid = av7110->pids[DMX_PES_PCR]; + ret = SetPIDs(av7110, vpid, apid, ttpid, subpid, pcrpid); + } + + mutex_unlock(&av7110->pid_mutex); + return ret; +} + + +/****************************************************************************** + * hardware filter functions + ******************************************************************************/ + +static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter) +{ + struct dvb_demux_feed *dvbdmxfeed = dvbdmxfilter->feed; + struct av7110 *av7110 = dvbdmxfeed->demux->priv; + u16 buf[20]; + int ret, i; + u16 handle; +// u16 mode = 0x0320; + u16 mode = 0xb96a; + + dprintk(4, "%p\n", av7110); + + if (av7110->full_ts) + return 0; + + if (dvbdmxfilter->type == DMX_TYPE_SEC) { + if (hw_sections) { + buf[4] = (dvbdmxfilter->filter.filter_value[0] << 8) | + dvbdmxfilter->maskandmode[0]; + for (i = 3; i < 18; i++) + buf[i + 4 - 2] = + (dvbdmxfilter->filter.filter_value[i] << 8) | + dvbdmxfilter->maskandmode[i]; + mode = 4; + } + } else if ((dvbdmxfeed->ts_type & TS_PACKET) && + !(dvbdmxfeed->ts_type & TS_PAYLOAD_ONLY)) { + av7110_p2t_init(&av7110->p2t_filter[dvbdmxfilter->index], dvbdmxfeed); + } + + buf[0] = (COMTYPE_PID_FILTER << 8) + AddPIDFilter; + buf[1] = 16; + buf[2] = dvbdmxfeed->pid; + buf[3] = mode; + + ret = av7110_fw_request(av7110, buf, 20, &handle, 1); + if (ret != 0 || handle >= 32) { + printk("dvb-ttpci: %s error buf %04x %04x %04x %04x " + "ret %d handle %04x\n", + __func__, buf[0], buf[1], buf[2], buf[3], + ret, handle); + dvbdmxfilter->hw_handle = 0xffff; + if (!ret) + ret = -1; + return ret; + } + + av7110->handle2filter[handle] = dvbdmxfilter; + dvbdmxfilter->hw_handle = handle; + + return ret; +} + +static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) +{ + struct av7110 *av7110 = dvbdmxfilter->feed->demux->priv; + u16 buf[3]; + u16 answ[2]; + int ret; + u16 handle; + + dprintk(4, "%p\n", av7110); + + if (av7110->full_ts) + return 0; + + handle = dvbdmxfilter->hw_handle; + if (handle >= 32) { + printk("%s tried to stop invalid filter %04x, filter type = %x\n", + __func__, handle, dvbdmxfilter->type); + return -EINVAL; + } + + av7110->handle2filter[handle] = NULL; + + buf[0] = (COMTYPE_PID_FILTER << 8) + DelPIDFilter; + buf[1] = 1; + buf[2] = handle; + ret = av7110_fw_request(av7110, buf, 3, answ, 2); + if (ret != 0 || answ[1] != handle) { + printk("dvb-ttpci: %s error cmd %04x %04x %04x ret %x " + "resp %04x %04x pid %d\n", + __func__, buf[0], buf[1], buf[2], ret, + answ[0], answ[1], dvbdmxfilter->feed->pid); + if (!ret) + ret = -1; + } + return ret; +} + + +static int dvb_feed_start_pid(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct av7110 *av7110 = dvbdmx->priv; + u16 *pid = dvbdmx->pids, npids[5]; + int i; + int ret = 0; + + dprintk(4, "%p\n", av7110); + + npids[0] = npids[1] = npids[2] = npids[3] = npids[4] = 0xffff; + i = dvbdmxfeed->pes_type; + npids[i] = (pid[i]&0x8000) ? 0 : pid[i]; + if ((i == 2) && npids[i] && (dvbdmxfeed->ts_type & TS_PACKET)) { + npids[i] = 0; + ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); + if (!ret) + ret = StartHWFilter(dvbdmxfeed->filter); + return ret; + } + if (dvbdmxfeed->pes_type <= 2 || dvbdmxfeed->pes_type == 4) { + ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); + if (ret) + return ret; + } + + if (dvbdmxfeed->pes_type < 2 && npids[0]) + if (av7110->fe_synced) + { + ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); + if (ret) + return ret; + } + + if ((dvbdmxfeed->ts_type & TS_PACKET) && !av7110->full_ts) { + if (dvbdmxfeed->pes_type == 0 && !(dvbdmx->pids[0] & 0x8000)) + ret = av7110_av_start_record(av7110, RP_AUDIO, dvbdmxfeed); + if (dvbdmxfeed->pes_type == 1 && !(dvbdmx->pids[1] & 0x8000)) + ret = av7110_av_start_record(av7110, RP_VIDEO, dvbdmxfeed); + } + return ret; +} + +static int dvb_feed_stop_pid(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct av7110 *av7110 = dvbdmx->priv; + u16 *pid = dvbdmx->pids, npids[5]; + int i; + + int ret = 0; + + dprintk(4, "%p\n", av7110); + + if (dvbdmxfeed->pes_type <= 1) { + ret = av7110_av_stop(av7110, dvbdmxfeed->pes_type ? RP_VIDEO : RP_AUDIO); + if (ret) + return ret; + if (!av7110->rec_mode) + dvbdmx->recording = 0; + if (!av7110->playing) + dvbdmx->playing = 0; + } + npids[0] = npids[1] = npids[2] = npids[3] = npids[4] = 0xffff; + i = dvbdmxfeed->pes_type; + switch (i) { + case 2: //teletext + if (dvbdmxfeed->ts_type & TS_PACKET) + ret = StopHWFilter(dvbdmxfeed->filter); + npids[2] = 0; + break; + case 0: + case 1: + case 4: + if (!pids_off) + return 0; + npids[i] = (pid[i]&0x8000) ? 0 : pid[i]; + break; + } + if (!ret) + ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); + return ret; +} + +static int av7110_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct av7110 *av7110 = demux->priv; + int ret = 0; + + dprintk(4, "%p\n", av7110); + + if (!demux->dmx.frontend) + return -EINVAL; + + if (!av7110->full_ts && feed->pid > 0x1fff) + return -EINVAL; + + if (feed->type == DMX_TYPE_TS) { + if ((feed->ts_type & TS_DECODER) && + (feed->pes_type <= DMX_PES_PCR)) { + switch (demux->dmx.frontend->source) { + case DMX_MEMORY_FE: + if (feed->ts_type & TS_DECODER) + if (feed->pes_type < 2 && + !(demux->pids[0] & 0x8000) && + !(demux->pids[1] & 0x8000)) { + dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout); + dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout); + ret = av7110_av_start_play(av7110,RP_AV); + if (!ret) + demux->playing = 1; + } + break; + default: + ret = dvb_feed_start_pid(feed); + break; + } + } else if ((feed->ts_type & TS_PACKET) && + (demux->dmx.frontend->source != DMX_MEMORY_FE)) { + ret = StartHWFilter(feed->filter); + } + } + + if (av7110->full_ts) { + budget_start_feed(feed); + return ret; + } + + if (feed->type == DMX_TYPE_SEC) { + int i; + + for (i = 0; i < demux->filternum; i++) { + if (demux->filter[i].state != DMX_STATE_READY) + continue; + if (demux->filter[i].type != DMX_TYPE_SEC) + continue; + if (demux->filter[i].filter.parent != &feed->feed.sec) + continue; + demux->filter[i].state = DMX_STATE_GO; + if (demux->dmx.frontend->source != DMX_MEMORY_FE) { + ret = StartHWFilter(&demux->filter[i]); + if (ret) + break; + } + } + } + + return ret; +} + + +static int av7110_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct av7110 *av7110 = demux->priv; + int i, rc, ret = 0; + dprintk(4, "%p\n", av7110); + + if (feed->type == DMX_TYPE_TS) { + if (feed->ts_type & TS_DECODER) { + if (feed->pes_type >= DMX_PES_OTHER || + !demux->pesfilter[feed->pes_type]) + return -EINVAL; + demux->pids[feed->pes_type] |= 0x8000; + demux->pesfilter[feed->pes_type] = NULL; + } + if (feed->ts_type & TS_DECODER && + feed->pes_type < DMX_PES_OTHER) { + ret = dvb_feed_stop_pid(feed); + } else + if ((feed->ts_type & TS_PACKET) && + (demux->dmx.frontend->source != DMX_MEMORY_FE)) + ret = StopHWFilter(feed->filter); + } + + if (av7110->full_ts) { + budget_stop_feed(feed); + return ret; + } + + if (feed->type == DMX_TYPE_SEC) { + for (i = 0; ifilternum; i++) { + if (demux->filter[i].state == DMX_STATE_GO && + demux->filter[i].filter.parent == &feed->feed.sec) { + demux->filter[i].state = DMX_STATE_READY; + if (demux->dmx.frontend->source != DMX_MEMORY_FE) { + rc = StopHWFilter(&demux->filter[i]); + if (!ret) + ret = rc; + /* keep going, stop as many filters as possible */ + } + } + } + } + + return ret; +} + + +static void restart_feeds(struct av7110 *av7110) +{ + struct dvb_demux *dvbdmx = &av7110->demux; + struct dvb_demux_feed *feed; + int mode; + int feeding; + int i, j; + + dprintk(4, "%p\n", av7110); + + mode = av7110->playing; + av7110->playing = 0; + av7110->rec_mode = 0; + + feeding = av7110->feeding1; /* full_ts mod */ + + for (i = 0; i < dvbdmx->feednum; i++) { + feed = &dvbdmx->feed[i]; + if (feed->state == DMX_STATE_GO) { + if (feed->type == DMX_TYPE_SEC) { + for (j = 0; j < dvbdmx->filternum; j++) { + if (dvbdmx->filter[j].type != DMX_TYPE_SEC) + continue; + if (dvbdmx->filter[j].filter.parent != &feed->feed.sec) + continue; + if (dvbdmx->filter[j].state == DMX_STATE_GO) + dvbdmx->filter[j].state = DMX_STATE_READY; + } + } + av7110_start_feed(feed); + } + } + + av7110->feeding1 = feeding; /* full_ts mod */ + + if (mode) + av7110_av_start_play(av7110, mode); +} + +static int dvb_get_stc(struct dmx_demux *demux, unsigned int num, + uint64_t *stc, unsigned int *base) +{ + int ret; + u16 fwstc[4]; + u16 tag = ((COMTYPE_REQUEST << 8) + ReqSTC); + struct dvb_demux *dvbdemux; + struct av7110 *av7110; + + /* pointer casting paranoia... */ + BUG_ON(!demux); + dvbdemux = demux->priv; + BUG_ON(!dvbdemux); + av7110 = dvbdemux->priv; + + dprintk(4, "%p\n", av7110); + + if (num != 0) + return -EINVAL; + + ret = av7110_fw_request(av7110, &tag, 0, fwstc, 4); + if (ret) { + printk(KERN_ERR "%s: av7110_fw_request error\n", __func__); + return ret; + } + dprintk(2, "fwstc = %04hx %04hx %04hx %04hx\n", + fwstc[0], fwstc[1], fwstc[2], fwstc[3]); + + *stc = (((uint64_t) ((fwstc[3] & 0x8000) >> 15)) << 32) | + (((uint64_t) fwstc[1]) << 16) | ((uint64_t) fwstc[0]); + *base = 1; + + dprintk(4, "stc = %lu\n", (unsigned long)*stc); + + return 0; +} + + +/****************************************************************************** + * SEC device file operations + ******************************************************************************/ + + +static int av7110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct av7110* av7110 = fe->dvb->priv; + + switch (tone) { + case SEC_TONE_ON: + return Set22K(av7110, 1); + + case SEC_TONE_OFF: + return Set22K(av7110, 0); + + default: + return -EINVAL; + } +} + +static int av7110_diseqc_send_master_cmd(struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd* cmd) +{ + struct av7110* av7110 = fe->dvb->priv; + + return av7110_diseqc_send(av7110, cmd->msg_len, cmd->msg, -1); +} + +static int av7110_diseqc_send_burst(struct dvb_frontend* fe, + fe_sec_mini_cmd_t minicmd) +{ + struct av7110* av7110 = fe->dvb->priv; + + return av7110_diseqc_send(av7110, 0, NULL, minicmd); +} + +/* simplified code from budget-core.c */ +static int stop_ts_capture(struct av7110 *budget) +{ + dprintk(2, "budget: %p\n", budget); + + if (--budget->feeding1) + return budget->feeding1; + saa7146_write(budget->dev, MC1, MASK_20); /* DMA3 off */ + SAA7146_IER_DISABLE(budget->dev, MASK_10); + SAA7146_ISR_CLEAR(budget->dev, MASK_10); + return 0; +} + +static int start_ts_capture(struct av7110 *budget) +{ + dprintk(2, "budget: %p\n", budget); + + if (budget->feeding1) + return ++budget->feeding1; + memset(budget->grabbing, 0x00, TS_BUFLEN); + budget->ttbp = 0; + SAA7146_ISR_CLEAR(budget->dev, MASK_10); /* VPE */ + SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ + saa7146_write(budget->dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ + return ++budget->feeding1; +} + +static int budget_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct av7110 *budget = demux->priv; + int status; + + dprintk(2, "av7110: %p\n", budget); + + spin_lock(&budget->feedlock1); + feed->pusi_seen = 0; /* have a clean section start */ + status = start_ts_capture(budget); + spin_unlock(&budget->feedlock1); + return status; +} + +static int budget_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct av7110 *budget = demux->priv; + int status; + + dprintk(2, "budget: %p\n", budget); + + spin_lock(&budget->feedlock1); + status = stop_ts_capture(budget); + spin_unlock(&budget->feedlock1); + return status; +} + +static void vpeirq(unsigned long cookie) +{ + struct av7110 *budget = (struct av7110 *)cookie; + u8 *mem = (u8 *) (budget->grabbing); + u32 olddma = budget->ttbp; + u32 newdma = saa7146_read(budget->dev, PCI_VDP3); + struct dvb_demux *demux = budget->full_ts ? &budget->demux : &budget->demux1; + + /* nearest lower position divisible by 188 */ + newdma -= newdma % 188; + + if (newdma >= TS_BUFLEN) + return; + + budget->ttbp = newdma; + + if (!budget->feeding1 || (newdma == olddma)) + return; + + /* Ensure streamed PCI data is synced to CPU */ + pci_dma_sync_sg_for_cpu(budget->dev->pci, budget->pt.slist, budget->pt.nents, PCI_DMA_FROMDEVICE); + +#if 0 + /* track rps1 activity */ + printk("vpeirq: %02x Event Counter 1 0x%04x\n", + mem[olddma], + saa7146_read(budget->dev, EC1R) & 0x3fff); +#endif + + if (newdma > olddma) + /* no wraparound, dump olddma..newdma */ + dvb_dmx_swfilter_packets(demux, mem + olddma, (newdma - olddma) / 188); + else { + /* wraparound, dump olddma..buflen and 0..newdma */ + dvb_dmx_swfilter_packets(demux, mem + olddma, (TS_BUFLEN - olddma) / 188); + dvb_dmx_swfilter_packets(demux, mem, newdma / 188); + } +} + +static int av7110_register(struct av7110 *av7110) +{ + int ret, i; + struct dvb_demux *dvbdemux = &av7110->demux; + struct dvb_demux *dvbdemux1 = &av7110->demux1; + + dprintk(4, "%p\n", av7110); + + if (av7110->registered) + return -1; + + av7110->registered = 1; + + dvbdemux->priv = (void *) av7110; + + for (i = 0; i < 32; i++) + av7110->handle2filter[i] = NULL; + + dvbdemux->filternum = (av7110->full_ts) ? 256 : 32; + dvbdemux->feednum = (av7110->full_ts) ? 256 : 32; + dvbdemux->start_feed = av7110_start_feed; + dvbdemux->stop_feed = av7110_stop_feed; + dvbdemux->write_to_decoder = av7110_write_to_decoder; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING); + + dvb_dmx_init(&av7110->demux); + av7110->demux.dmx.get_stc = dvb_get_stc; + + av7110->dmxdev.filternum = (av7110->full_ts) ? 256 : 32; + av7110->dmxdev.demux = &dvbdemux->dmx; + av7110->dmxdev.capabilities = 0; + + dvb_dmxdev_init(&av7110->dmxdev, &av7110->dvb_adapter); + + av7110->hw_frontend.source = DMX_FRONTEND_0; + + ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &av7110->hw_frontend); + + if (ret < 0) + return ret; + + av7110->mem_frontend.source = DMX_MEMORY_FE; + + ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &av7110->mem_frontend); + + if (ret < 0) + return ret; + + ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, + &av7110->hw_frontend); + if (ret < 0) + return ret; + + av7110_av_register(av7110); + av7110_ca_register(av7110); + +#ifdef CONFIG_DVB_AV7110_OSD + dvb_register_device(&av7110->dvb_adapter, &av7110->osd_dev, + &dvbdev_osd, av7110, DVB_DEVICE_OSD); +#endif + + dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx); + + if (budgetpatch) { + /* initialize software demux1 without its own frontend + * demux1 hardware is connected to frontend0 of demux0 + */ + dvbdemux1->priv = (void *) av7110; + + dvbdemux1->filternum = 256; + dvbdemux1->feednum = 256; + dvbdemux1->start_feed = budget_start_feed; + dvbdemux1->stop_feed = budget_stop_feed; + dvbdemux1->write_to_decoder = NULL; + + dvbdemux1->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING); + + dvb_dmx_init(&av7110->demux1); + + av7110->dmxdev1.filternum = 256; + av7110->dmxdev1.demux = &dvbdemux1->dmx; + av7110->dmxdev1.capabilities = 0; + + dvb_dmxdev_init(&av7110->dmxdev1, &av7110->dvb_adapter); + + dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx); + printk("dvb-ttpci: additional demux1 for budget-patch registered\n"); + } + return 0; +} + + +static void dvb_unregister(struct av7110 *av7110) +{ + struct dvb_demux *dvbdemux = &av7110->demux; + struct dvb_demux *dvbdemux1 = &av7110->demux1; + + dprintk(4, "%p\n", av7110); + + if (!av7110->registered) + return; + + if (budgetpatch) { + dvb_net_release(&av7110->dvb_net1); + dvbdemux->dmx.close(&dvbdemux1->dmx); + dvb_dmxdev_release(&av7110->dmxdev1); + dvb_dmx_release(&av7110->demux1); + } + + dvb_net_release(&av7110->dvb_net); + + dvbdemux->dmx.close(&dvbdemux->dmx); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &av7110->hw_frontend); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &av7110->mem_frontend); + + dvb_dmxdev_release(&av7110->dmxdev); + dvb_dmx_release(&av7110->demux); + + if (av7110->fe != NULL) { + dvb_unregister_frontend(av7110->fe); + dvb_frontend_detach(av7110->fe); + } + dvb_unregister_device(av7110->osd_dev); + av7110_av_unregister(av7110); + av7110_ca_unregister(av7110); +} + + +/**************************************************************************** + * I2C client commands + ****************************************************************************/ + +int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val) +{ + u8 msg[2] = { reg, val }; + struct i2c_msg msgs; + + msgs.flags = 0; + msgs.addr = id / 2; + msgs.len = 2; + msgs.buf = msg; + return i2c_transfer(&av7110->i2c_adap, &msgs, 1); +} + +u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg) +{ + u8 mm1[] = {0x00}; + u8 mm2[] = {0x00}; + struct i2c_msg msgs[2]; + + msgs[0].flags = 0; + msgs[1].flags = I2C_M_RD; + msgs[0].addr = msgs[1].addr = id / 2; + mm1[0] = reg; + msgs[0].len = 1; msgs[1].len = 1; + msgs[0].buf = mm1; msgs[1].buf = mm2; + i2c_transfer(&av7110->i2c_adap, msgs, 2); + + return mm2[0]; +} + +/**************************************************************************** + * INITIALIZATION + ****************************************************************************/ + + +static int check_firmware(struct av7110* av7110) +{ + u32 crc = 0, len = 0; + unsigned char *ptr; + + /* check for firmware magic */ + ptr = av7110->bin_fw; + if (ptr[0] != 'A' || ptr[1] != 'V' || + ptr[2] != 'F' || ptr[3] != 'W') { + printk("dvb-ttpci: this is not an av7110 firmware\n"); + return -EINVAL; + } + ptr += 4; + + /* check dpram file */ + crc = get_unaligned_be32(ptr); + ptr += 4; + len = get_unaligned_be32(ptr); + ptr += 4; + if (len >= 512) { + printk("dvb-ttpci: dpram file is way too big.\n"); + return -EINVAL; + } + if (crc != crc32_le(0, ptr, len)) { + printk("dvb-ttpci: crc32 of dpram file does not match.\n"); + return -EINVAL; + } + av7110->bin_dpram = ptr; + av7110->size_dpram = len; + ptr += len; + + /* check root file */ + crc = get_unaligned_be32(ptr); + ptr += 4; + len = get_unaligned_be32(ptr); + ptr += 4; + + if (len <= 200000 || len >= 300000 || + len > ((av7110->bin_fw + av7110->size_fw) - ptr)) { + printk("dvb-ttpci: root file has strange size (%d). aborting.\n", len); + return -EINVAL; + } + if( crc != crc32_le(0, ptr, len)) { + printk("dvb-ttpci: crc32 of root file does not match.\n"); + return -EINVAL; + } + av7110->bin_root = ptr; + av7110->size_root = len; + return 0; +} + +static void put_firmware(struct av7110* av7110) +{ + vfree(av7110->bin_fw); +} + +static int get_firmware(struct av7110* av7110) +{ + int ret; + const struct firmware *fw; + + /* request the av7110 firmware, this will block until someone uploads it */ + ret = request_firmware(&fw, "dvb-ttpci-01.fw", &av7110->dev->pci->dev); + if (ret) { + if (ret == -ENOENT) { + printk(KERN_ERR "dvb-ttpci: could not load firmware," + " file not found: dvb-ttpci-01.fw\n"); + printk(KERN_ERR "dvb-ttpci: usually this should be in " + "/usr/lib/hotplug/firmware or /lib/firmware\n"); + printk(KERN_ERR "dvb-ttpci: and can be downloaded from" + " http://www.linuxtv.org/download/dvb/firmware/\n"); + } else + printk(KERN_ERR "dvb-ttpci: cannot request firmware" + " (error %i)\n", ret); + return -EINVAL; + } + + if (fw->size <= 200000) { + printk("dvb-ttpci: this firmware is way too small.\n"); + release_firmware(fw); + return -EINVAL; + } + + /* check if the firmware is available */ + av7110->bin_fw = vmalloc(fw->size); + if (NULL == av7110->bin_fw) { + dprintk(1, "out of memory\n"); + release_firmware(fw); + return -ENOMEM; + } + + memcpy(av7110->bin_fw, fw->data, fw->size); + av7110->size_fw = fw->size; + if ((ret = check_firmware(av7110))) + vfree(av7110->bin_fw); + + release_firmware(fw); + return ret; +} + +static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct av7110* av7110 = fe->dvb->priv; + u8 pwr = 0; + u8 buf[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + u32 div = (p->frequency + 479500) / 125; + + if (p->frequency > 2000000) + pwr = 3; + else if (p->frequency > 1800000) + pwr = 2; + else if (p->frequency > 1600000) + pwr = 1; + else if (p->frequency > 1200000) + pwr = 0; + else if (p->frequency >= 1100000) + pwr = 1; + else + pwr = 2; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = ((div & 0x18000) >> 10) | 0x95; + buf[3] = (pwr << 6) | 0x30; + + // NOTE: since we're using a prescaler of 2, we set the + // divisor frequency to 62.5kHz and divide by 125 above + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct ves1x93_config alps_bsrv2_config = { + .demod_address = 0x08, + .xin = 90100000UL, + .invert_pwm = 0, +}; + +static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct av7110* av7110 = fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = (p->frequency + 35937500 + 31250) / 62500; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x85 | ((div >> 10) & 0x60); + data[3] = (p->frequency < 174000000 ? 0x88 : p->frequency < 470000000 ? 0x84 : 0x81); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct ves1820_config alps_tdbe2_config = { + .demod_address = 0x09, + .xin = 57840000UL, + .invert = 1, + .selagc = VES1820_SELAGC_SIGNAMPERR, +}; + + + + +static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct av7110* av7110 = fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = p->frequency / 125; + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x8e; + data[3] = 0x00; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct tda8083_config grundig_29504_451_config = { + .demod_address = 0x68, +}; + + + +static int philips_cd1516_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct av7110* av7110 = fe->dvb->priv; + u32 div; + u32 f = p->frequency; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = (f + 36125000 + 31250) / 62500; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x8e; + data[3] = (f < 174000000 ? 0xa1 : f < 470000000 ? 0x92 : 0x34); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct ves1820_config philips_cd1516_config = { + .demod_address = 0x09, + .xin = 57840000UL, + .invert = 1, + .selagc = VES1820_SELAGC_SIGNAMPERR, +}; + + + +static int alps_tdlb7_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct av7110* av7110 = fe->dvb->priv; + u32 div, pwr; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = (p->frequency + 36200000) / 166666; + + if (p->frequency <= 782000000) + pwr = 1; + else + pwr = 2; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x85; + data[3] = pwr << 6; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static int alps_tdlb7_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +{ +#if IS_ENABLED(CONFIG_DVB_SP8870) + struct av7110* av7110 = fe->dvb->priv; + + return request_firmware(fw, name, &av7110->dev->pci->dev); +#else + return -EINVAL; +#endif +} + +static struct sp8870_config alps_tdlb7_config = { + + .demod_address = 0x71, + .request_firmware = alps_tdlb7_request_firmware, +}; + + +static u8 nexusca_stv0297_inittab[] = { + 0x80, 0x01, + 0x80, 0x00, + 0x81, 0x01, + 0x81, 0x00, + 0x00, 0x09, + 0x01, 0x69, + 0x03, 0x00, + 0x04, 0x00, + 0x07, 0x00, + 0x08, 0x00, + 0x20, 0x00, + 0x21, 0x40, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x40, + 0x25, 0x88, + 0x30, 0xff, + 0x31, 0x00, + 0x32, 0xff, + 0x33, 0x00, + 0x34, 0x50, + 0x35, 0x7f, + 0x36, 0x00, + 0x37, 0x20, + 0x38, 0x00, + 0x40, 0x1c, + 0x41, 0xff, + 0x42, 0x29, + 0x43, 0x00, + 0x44, 0xff, + 0x45, 0x00, + 0x46, 0x00, + 0x49, 0x04, + 0x4a, 0x00, + 0x4b, 0x7b, + 0x52, 0x30, + 0x55, 0xae, + 0x56, 0x47, + 0x57, 0xe1, + 0x58, 0x3a, + 0x5a, 0x1e, + 0x5b, 0x34, + 0x60, 0x00, + 0x63, 0x00, + 0x64, 0x00, + 0x65, 0x00, + 0x66, 0x00, + 0x67, 0x00, + 0x68, 0x00, + 0x69, 0x00, + 0x6a, 0x02, + 0x6b, 0x00, + 0x70, 0xff, + 0x71, 0x00, + 0x72, 0x00, + 0x73, 0x00, + 0x74, 0x0c, + 0x80, 0x00, + 0x81, 0x00, + 0x82, 0x00, + 0x83, 0x00, + 0x84, 0x04, + 0x85, 0x80, + 0x86, 0x24, + 0x87, 0x78, + 0x88, 0x10, + 0x89, 0x00, + 0x90, 0x01, + 0x91, 0x01, + 0xa0, 0x04, + 0xa1, 0x00, + 0xa2, 0x00, + 0xb0, 0x91, + 0xb1, 0x0b, + 0xc0, 0x53, + 0xc1, 0x70, + 0xc2, 0x12, + 0xd0, 0x00, + 0xd1, 0x00, + 0xd2, 0x00, + 0xd3, 0x00, + 0xd4, 0x00, + 0xd5, 0x00, + 0xde, 0x00, + 0xdf, 0x00, + 0x61, 0x49, + 0x62, 0x0b, + 0x53, 0x08, + 0x59, 0x08, + 0xff, 0xff, +}; + +static int nexusca_stv0297_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct av7110* av7110 = fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x63, .flags = 0, .buf = data, .len = sizeof(data) }; + struct i2c_msg readmsg = { .addr = 0x63, .flags = I2C_M_RD, .buf = data, .len = 1 }; + int i; + + div = (p->frequency + 36150000 + 31250) / 62500; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0xce; + + if (p->frequency < 45000000) + return -EINVAL; + else if (p->frequency < 137000000) + data[3] = 0x01; + else if (p->frequency < 403000000) + data[3] = 0x02; + else if (p->frequency < 860000000) + data[3] = 0x04; + else + return -EINVAL; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) { + printk("nexusca: pll transfer failed!\n"); + return -EIO; + } + + // wait for PLL lock + for(i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&av7110->i2c_adap, &readmsg, 1) == 1) + if (data[0] & 0x40) break; + msleep(10); + } + + return 0; +} + +static struct stv0297_config nexusca_stv0297_config = { + + .demod_address = 0x1C, + .inittab = nexusca_stv0297_inittab, + .invert = 1, + .stop_during_read = 1, +}; + + + +static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct av7110* av7110 = fe->dvb->priv; + u32 div; + u8 cfg, cpump, band_select; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = (36125000 + p->frequency) / 166666; + + cfg = 0x88; + + if (p->frequency < 175000000) + cpump = 2; + else if (p->frequency < 390000000) + cpump = 1; + else if (p->frequency < 470000000) + cpump = 2; + else if (p->frequency < 750000000) + cpump = 1; + else + cpump = 3; + + if (p->frequency < 175000000) + band_select = 0x0e; + else if (p->frequency < 470000000) + band_select = 0x05; + else + band_select = 0x03; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = ((div >> 10) & 0x60) | cfg; + data[3] = (cpump << 6) | band_select; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct l64781_config grundig_29504_401_config = { + .demod_address = 0x55, +}; + + + +static int av7110_fe_lock_fix(struct av7110* av7110, fe_status_t status) +{ + int ret = 0; + int synced = (status & FE_HAS_LOCK) ? 1 : 0; + + av7110->fe_status = status; + + if (av7110->fe_synced == synced) + return 0; + + if (av7110->playing) { + av7110->fe_synced = synced; + return 0; + } + + if (mutex_lock_interruptible(&av7110->pid_mutex)) + return -ERESTARTSYS; + + if (synced) { + ret = SetPIDs(av7110, av7110->pids[DMX_PES_VIDEO], + av7110->pids[DMX_PES_AUDIO], + av7110->pids[DMX_PES_TELETEXT], 0, + av7110->pids[DMX_PES_PCR]); + if (!ret) + ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); + } else { + ret = SetPIDs(av7110, 0, 0, 0, 0, 0); + if (!ret) { + ret = av7110_fw_cmd(av7110, COMTYPE_PID_FILTER, FlushTSQueue, 0); + if (!ret) + ret = av7110_wait_msgstate(av7110, GPMQBusy); + } + } + + if (!ret) + av7110->fe_synced = synced; + + mutex_unlock(&av7110->pid_mutex); + return ret; +} + +static int av7110_fe_set_frontend(struct dvb_frontend *fe) +{ + struct av7110* av7110 = fe->dvb->priv; + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_set_frontend(fe); + + return ret; +} + +static int av7110_fe_init(struct dvb_frontend* fe) +{ + struct av7110* av7110 = fe->dvb->priv; + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_init(fe); + return ret; +} + +static int av7110_fe_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct av7110* av7110 = fe->dvb->priv; + + /* call the real implementation */ + int ret = av7110->fe_read_status(fe, status); + if (!ret) + if (((*status ^ av7110->fe_status) & FE_HAS_LOCK) && (*status & FE_HAS_LOCK)) + ret = av7110_fe_lock_fix(av7110, *status); + return ret; +} + +static int av7110_fe_diseqc_reset_overload(struct dvb_frontend* fe) +{ + struct av7110* av7110 = fe->dvb->priv; + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_diseqc_reset_overload(fe); + return ret; +} + +static int av7110_fe_diseqc_send_master_cmd(struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd* cmd) +{ + struct av7110* av7110 = fe->dvb->priv; + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) { + av7110->saved_master_cmd = *cmd; + ret = av7110->fe_diseqc_send_master_cmd(fe, cmd); + } + return ret; +} + +static int av7110_fe_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + struct av7110* av7110 = fe->dvb->priv; + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) { + av7110->saved_minicmd = minicmd; + ret = av7110->fe_diseqc_send_burst(fe, minicmd); + } + return ret; +} + +static int av7110_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct av7110* av7110 = fe->dvb->priv; + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) { + av7110->saved_tone = tone; + ret = av7110->fe_set_tone(fe, tone); + } + return ret; +} + +static int av7110_fe_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct av7110* av7110 = fe->dvb->priv; + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) { + av7110->saved_voltage = voltage; + ret = av7110->fe_set_voltage(fe, voltage); + } + return ret; +} + +static int av7110_fe_dishnetwork_send_legacy_command(struct dvb_frontend* fe, unsigned long cmd) +{ + struct av7110* av7110 = fe->dvb->priv; + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_dishnetwork_send_legacy_command(fe, cmd); + return ret; +} + +static void dvb_s_recover(struct av7110* av7110) +{ + av7110_fe_init(av7110->fe); + + av7110_fe_set_voltage(av7110->fe, av7110->saved_voltage); + if (av7110->saved_master_cmd.msg_len) { + msleep(20); + av7110_fe_diseqc_send_master_cmd(av7110->fe, &av7110->saved_master_cmd); + } + msleep(20); + av7110_fe_diseqc_send_burst(av7110->fe, av7110->saved_minicmd); + msleep(20); + av7110_fe_set_tone(av7110->fe, av7110->saved_tone); + + av7110_fe_set_frontend(av7110->fe); +} + +static u8 read_pwm(struct av7110* av7110) +{ + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, + { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; + + if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static int frontend_init(struct av7110 *av7110) +{ + int ret; + + if (av7110->dev->pci->subsystem_vendor == 0x110a) { + switch(av7110->dev->pci->subsystem_device) { + case 0x0000: // Fujitsu/Siemens DVB-Cable (ves1820/Philips CD1516(??)) + av7110->fe = dvb_attach(ves1820_attach, &philips_cd1516_config, + &av7110->i2c_adap, read_pwm(av7110)); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = philips_cd1516_tuner_set_params; + } + break; + } + + } else if (av7110->dev->pci->subsystem_vendor == 0x13c2) { + switch(av7110->dev->pci->subsystem_device) { + case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X + case 0x0003: // Hauppauge/TT WinTV Nexus-S Rev 2.X + case 0x1002: // Hauppauge/TT WinTV DVB-S rev1.3SE + + // try the ALPS BSRV2 first of all + av7110->fe = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &av7110->i2c_adap); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params; + av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; + av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst; + av7110->fe->ops.set_tone = av7110_set_tone; + av7110->recover = dvb_s_recover; + break; + } + + // try the ALPS BSRU6 now + av7110->fe = dvb_attach(stv0299_attach, &alps_bsru6_config, &av7110->i2c_adap); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + av7110->fe->tuner_priv = &av7110->i2c_adap; + + av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; + av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst; + av7110->fe->ops.set_tone = av7110_set_tone; + av7110->recover = dvb_s_recover; + break; + } + + // Try the grundig 29504-451 + av7110->fe = dvb_attach(tda8083_attach, &grundig_29504_451_config, &av7110->i2c_adap); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params; + av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; + av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst; + av7110->fe->ops.set_tone = av7110_set_tone; + av7110->recover = dvb_s_recover; + break; + } + + /* Try DVB-C cards */ + switch(av7110->dev->pci->subsystem_device) { + case 0x0000: + /* Siemens DVB-C (full-length card) VES1820/Philips CD1516 */ + av7110->fe = dvb_attach(ves1820_attach, &philips_cd1516_config, &av7110->i2c_adap, + read_pwm(av7110)); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = philips_cd1516_tuner_set_params; + } + break; + case 0x0003: + /* Hauppauge DVB-C 2.1 VES1820/ALPS TDBE2 */ + av7110->fe = dvb_attach(ves1820_attach, &alps_tdbe2_config, &av7110->i2c_adap, + read_pwm(av7110)); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; + } + break; + } + break; + + case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X + // try ALPS TDLB7 first, then Grundig 29504-401 + av7110->fe = dvb_attach(sp8870_attach, &alps_tdlb7_config, &av7110->i2c_adap); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = alps_tdlb7_tuner_set_params; + break; + } + /* fall-thru */ + + case 0x0008: // Hauppauge/TT DVB-T + // Grundig 29504-401 + av7110->fe = dvb_attach(l64781_attach, &grundig_29504_401_config, &av7110->i2c_adap); + if (av7110->fe) + av7110->fe->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + break; + + case 0x0002: // Hauppauge/TT DVB-C premium rev2.X + + av7110->fe = dvb_attach(ves1820_attach, &alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110)); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; + } + break; + + case 0x0004: // Galaxis DVB-S rev1.3 + /* ALPS BSRV2 */ + av7110->fe = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &av7110->i2c_adap); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params; + av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; + av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst; + av7110->fe->ops.set_tone = av7110_set_tone; + av7110->recover = dvb_s_recover; + } + break; + + case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */ + /* Grundig 29504-451 */ + av7110->fe = dvb_attach(tda8083_attach, &grundig_29504_451_config, &av7110->i2c_adap); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params; + av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; + av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst; + av7110->fe->ops.set_tone = av7110_set_tone; + av7110->recover = dvb_s_recover; + } + break; + + case 0x000A: // Hauppauge/TT Nexus-CA rev1.X + + av7110->fe = dvb_attach(stv0297_attach, &nexusca_stv0297_config, &av7110->i2c_adap); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = nexusca_stv0297_tuner_set_params; + + /* set TDA9819 into DVB mode */ + saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD) + saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF) + + /* tuner on this needs a slower i2c bus speed */ + av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; + break; + } + break; + + case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */ + /* ALPS BSBE1 */ + av7110->fe = dvb_attach(stv0299_attach, &alps_bsbe1_config, &av7110->i2c_adap); + if (av7110->fe) { + av7110->fe->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; + av7110->fe->tuner_priv = &av7110->i2c_adap; + + if (dvb_attach(lnbp21_attach, av7110->fe, &av7110->i2c_adap, 0, 0) == NULL) { + printk("dvb-ttpci: LNBP21 not found!\n"); + if (av7110->fe->ops.release) + av7110->fe->ops.release(av7110->fe); + av7110->fe = NULL; + } else { + av7110->fe->ops.dishnetwork_send_legacy_command = NULL; + av7110->recover = dvb_s_recover; + } + } + break; + } + } + + if (!av7110->fe) { + /* FIXME: propagate the failure code from the lower layers */ + ret = -ENOMEM; + printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + av7110->dev->pci->vendor, + av7110->dev->pci->device, + av7110->dev->pci->subsystem_vendor, + av7110->dev->pci->subsystem_device); + } else { + FE_FUNC_OVERRIDE(av7110->fe->ops.init, av7110->fe_init, av7110_fe_init); + FE_FUNC_OVERRIDE(av7110->fe->ops.read_status, av7110->fe_read_status, av7110_fe_read_status); + FE_FUNC_OVERRIDE(av7110->fe->ops.diseqc_reset_overload, av7110->fe_diseqc_reset_overload, av7110_fe_diseqc_reset_overload); + FE_FUNC_OVERRIDE(av7110->fe->ops.diseqc_send_master_cmd, av7110->fe_diseqc_send_master_cmd, av7110_fe_diseqc_send_master_cmd); + FE_FUNC_OVERRIDE(av7110->fe->ops.diseqc_send_burst, av7110->fe_diseqc_send_burst, av7110_fe_diseqc_send_burst); + FE_FUNC_OVERRIDE(av7110->fe->ops.set_tone, av7110->fe_set_tone, av7110_fe_set_tone); + FE_FUNC_OVERRIDE(av7110->fe->ops.set_voltage, av7110->fe_set_voltage, av7110_fe_set_voltage); + FE_FUNC_OVERRIDE(av7110->fe->ops.dishnetwork_send_legacy_command, av7110->fe_dishnetwork_send_legacy_command, av7110_fe_dishnetwork_send_legacy_command); + FE_FUNC_OVERRIDE(av7110->fe->ops.set_frontend, av7110->fe_set_frontend, av7110_fe_set_frontend); + + ret = dvb_register_frontend(&av7110->dvb_adapter, av7110->fe); + if (ret < 0) { + printk("av7110: Frontend registration failed!\n"); + dvb_frontend_detach(av7110->fe); + av7110->fe = NULL; + } + } + return ret; +} + +/* Budgetpatch note: + * Original hardware design by Roberto Deza: + * There is a DVB_Wiki at + * http://www.linuxtv.org/ + * + * New software triggering design by Emard that works on + * original Roberto Deza's hardware: + * + * rps1 code for budgetpatch will copy internal HS event to GPIO3 pin. + * GPIO3 is in budget-patch hardware connectd to port B VSYNC + * HS is an internal event of 7146, accessible with RPS + * and temporarily raised high every n lines + * (n in defined in the RPS_THRESH1 counter threshold) + * I think HS is raised high on the beginning of the n-th line + * and remains high until this n-th line that triggered + * it is completely received. When the receiption of n-th line + * ends, HS is lowered. + * + * To transmit data over DMA, 7146 needs changing state at + * port B VSYNC pin. Any changing of port B VSYNC will + * cause some DMA data transfer, with more or less packets loss. + * It depends on the phase and frequency of VSYNC and + * the way of 7146 is instructed to trigger on port B (defined + * in DD1_INIT register, 3rd nibble from the right valid + * numbers are 0-7, see datasheet) + * + * The correct triggering can minimize packet loss, + * dvbtraffic should give this stable bandwidths: + * 22k transponder = 33814 kbit/s + * 27.5k transponder = 38045 kbit/s + * by experiment it is found that the best results + * (stable bandwidths and almost no packet loss) + * are obtained using DD1_INIT triggering number 2 + * (Va at rising edge of VS Fa = HS x VS-failing forced toggle) + * and a VSYNC phase that occurs in the middle of DMA transfer + * (about byte 188*512=96256 in the DMA window). + * + * Phase of HS is still not clear to me how to control, + * It just happens to be so. It can be seen if one enables + * RPS_IRQ and print Event Counter 1 in vpeirq(). Every + * time RPS_INTERRUPT is called, the Event Counter 1 will + * increment. That's how the 7146 is programmed to do event + * counting in this budget-patch.c + * I *think* HPS setting has something to do with the phase + * of HS but I can't be 100% sure in that. + * + * hardware debug note: a working budget card (including budget patch) + * with vpeirq() interrupt setup in mode "0x90" (every 64K) will + * generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes + * and that means 3*25=75 Hz of interrupt freqency, as seen by + * watch cat /proc/interrupts + * + * If this frequency is 3x lower (and data received in the DMA + * buffer don't start with 0x47, but in the middle of packets, + * whose lengths appear to be like 188 292 188 104 etc. + * this means VSYNC line is not connected in the hardware. + * (check soldering pcb and pins) + * The same behaviour of missing VSYNC can be duplicated on budget + * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. + */ +static int av7110_attach(struct saa7146_dev* dev, + struct saa7146_pci_extension_data *pci_ext) +{ + const int length = TS_WIDTH * TS_HEIGHT; + struct pci_dev *pdev = dev->pci; + struct av7110 *av7110; + struct task_struct *thread; + int ret, count = 0; + + dprintk(4, "dev: %p\n", dev); + + /* Set RPS_IRQ to 1 to track rps1 activity. + * Enabling this won't send any interrupt to PC CPU. + */ +#define RPS_IRQ 0 + + if (budgetpatch == 1) { + budgetpatch = 0; + /* autodetect the presence of budget patch + * this only works if saa7146 has been recently + * reset with with MASK_31 to MC1 + * + * will wait for VBI_B event (vertical blank at port B) + * and will reset GPIO3 after VBI_B is detected. + * (GPIO3 should be raised high by CPU to + * test if GPIO3 will generate vertical blank signal + * in budget patch GPIO3 is connected to VSYNC_B + */ + + /* RESET SAA7146 */ + saa7146_write(dev, MC1, MASK_31); + /* autodetection success seems to be time-dependend after reset */ + + /* Fix VSYNC level */ + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + /* set vsync_b triggering */ + saa7146_write(dev, DD1_STREAM_B, 0); + /* port B VSYNC at rising edge */ + saa7146_write(dev, DD1_INIT, 0x00000200); + saa7146_write(dev, BRS_CTRL, 0x00000000); // VBI + saa7146_write(dev, MC2, + 1 * (MASK_08 | MASK_24) | // BRS control + 0 * (MASK_09 | MASK_25) | // a + 1 * (MASK_10 | MASK_26) | // b + 0 * (MASK_06 | MASK_22) | // HPS_CTRL1 + 0 * (MASK_05 | MASK_21) | // HPS_CTRL2 + 0 * (MASK_01 | MASK_15) // DEBI + ); + + /* start writing RPS1 code from beginning */ + count = 0; + /* Disable RPS1 */ + saa7146_write(dev, MC1, MASK_29); + /* RPS1 timeout disable */ + saa7146_write(dev, RPS_TOV1, 0); + WRITE_RPS1(CMD_PAUSE | EVT_VBI_B); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); +#if RPS_IRQ + /* issue RPS1 interrupt to increment counter */ + WRITE_RPS1(CMD_INTERRUPT); +#endif + WRITE_RPS1(CMD_STOP); + /* Jump to begin of RPS program as safety measure (p37) */ + WRITE_RPS1(CMD_JUMP); + WRITE_RPS1(dev->d_rps1.dma_handle); + +#if RPS_IRQ + /* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) + * use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled + * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called + */ + saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); + /* set event counter 1 threshold to maximum allowed value (rEC p55) */ + saa7146_write(dev, ECT1R, 0x3fff ); +#endif + /* Set RPS1 Address register to point to RPS code (r108 p42) */ + saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + /* Enable RPS1, (rFC p33) */ + saa7146_write(dev, MC1, (MASK_13 | MASK_29 )); + + mdelay(10); + /* now send VSYNC_B to rps1 by rising GPIO3 */ + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); + mdelay(10); + /* if rps1 responded by lowering the GPIO3, + * then we have budgetpatch hardware + */ + if ((saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0) { + budgetpatch = 1; + printk("dvb-ttpci: BUDGET-PATCH DETECTED.\n"); + } + /* Disable RPS1 */ + saa7146_write(dev, MC1, ( MASK_29 )); +#if RPS_IRQ + printk("dvb-ttpci: Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff ); +#endif + } + + /* prepare the av7110 device struct */ + av7110 = kzalloc(sizeof(struct av7110), GFP_KERNEL); + if (!av7110) { + dprintk(1, "out of memory\n"); + return -ENOMEM; + } + + av7110->card_name = (char*) pci_ext->ext_priv; + av7110->dev = dev; + dev->ext_priv = av7110; + + ret = get_firmware(av7110); + if (ret < 0) + goto err_kfree_0; + + ret = dvb_register_adapter(&av7110->dvb_adapter, av7110->card_name, + THIS_MODULE, &dev->pci->dev, adapter_nr); + if (ret < 0) + goto err_put_firmware_1; + + /* the Siemens DVB needs this if you want to have the i2c chips + get recognized before the main driver is fully loaded */ + saa7146_write(dev, GPIO_CTRL, 0x500000); + + strlcpy(av7110->i2c_adap.name, pci_ext->ext_priv, sizeof(av7110->i2c_adap.name)); + + saa7146_i2c_adapter_prepare(dev, &av7110->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120); /* 275 kHz */ + + ret = i2c_add_adapter(&av7110->i2c_adap); + if (ret < 0) + goto err_dvb_unregister_adapter_2; + + ttpci_eeprom_parse_mac(&av7110->i2c_adap, + av7110->dvb_adapter.proposed_mac); + ret = -ENOMEM; + + /* full-ts mod? */ + if (full_ts) + av7110->full_ts = true; + + /* check for full-ts flag in eeprom */ + if (i2c_readreg(av7110, 0xaa, 0) == 0x4f && i2c_readreg(av7110, 0xaa, 1) == 0x45) { + u8 flags = i2c_readreg(av7110, 0xaa, 2); + if (flags != 0xff && (flags & 0x01)) + av7110->full_ts = true; + } + + if (av7110->full_ts) { + printk(KERN_INFO "dvb-ttpci: full-ts mode enabled for saa7146 port B\n"); + spin_lock_init(&av7110->feedlock1); + av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length, + &av7110->pt); + if (!av7110->grabbing) + goto err_i2c_del_3; + + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, MC2, (MASK_10 | MASK_26)); + + saa7146_write(dev, DD1_INIT, 0x00000600); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + saa7146_write(dev, BRS_CTRL, 0x60000000); + saa7146_write(dev, MC2, MASK_08 | MASK_24); + + /* dma3 */ + saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000)); + saa7146_write(dev, BASE_ODD3, 0); + saa7146_write(dev, BASE_EVEN3, 0); + saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT); + saa7146_write(dev, PITCH3, TS_WIDTH); + saa7146_write(dev, BASE_PAGE3, av7110->pt.dma | ME1 | 0x90); + saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH); + saa7146_write(dev, MC2, MASK_04 | MASK_20); + + tasklet_init(&av7110->vpe_tasklet, vpeirq, (unsigned long) av7110); + + } else if (budgetpatch) { + spin_lock_init(&av7110->feedlock1); + av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length, + &av7110->pt); + if (!av7110->grabbing) + goto err_i2c_del_3; + + saa7146_write(dev, PCI_BT_V1, 0x1c1f101f); + saa7146_write(dev, BCS_CTRL, 0x80400040); + /* set dd1 stream a & b */ + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, DD1_INIT, 0x03000200); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x60000000); + saa7146_write(dev, BASE_ODD3, 0); + saa7146_write(dev, BASE_EVEN3, 0); + saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT); + saa7146_write(dev, BASE_PAGE3, av7110->pt.dma | ME1 | 0x90); + + saa7146_write(dev, PITCH3, TS_WIDTH); + saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH); + + /* upload all */ + saa7146_write(dev, MC2, 0x077c077c); + saa7146_write(dev, GPIO_CTRL, 0x000000); +#if RPS_IRQ + /* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) + * use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled + * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called + */ + saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); + /* set event counter 1 threshold to maximum allowed value (rEC p55) */ + saa7146_write(dev, ECT1R, 0x3fff ); +#endif + /* Setup BUDGETPATCH MAIN RPS1 "program" (p35) */ + count = 0; + + /* Wait Source Line Counter Threshold (p36) */ + WRITE_RPS1(CMD_PAUSE | EVT_HS); + /* Set GPIO3=1 (p42) */ + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTHI<<24); +#if RPS_IRQ + /* issue RPS1 interrupt */ + WRITE_RPS1(CMD_INTERRUPT); +#endif + /* Wait reset Source Line Counter Threshold (p36) */ + WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS); + /* Set GPIO3=0 (p42) */ + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); +#if RPS_IRQ + /* issue RPS1 interrupt */ + WRITE_RPS1(CMD_INTERRUPT); +#endif + /* Jump to begin of RPS program (p37) */ + WRITE_RPS1(CMD_JUMP); + WRITE_RPS1(dev->d_rps1.dma_handle); + + /* Fix VSYNC level */ + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + /* Set RPS1 Address register to point to RPS code (r108 p42) */ + saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + /* Set Source Line Counter Threshold, using BRS (rCC p43) + * It generates HS event every TS_HEIGHT lines + * this is related to TS_WIDTH set in register + * NUM_LINE_BYTE3. If NUM_LINE_BYTE low 16 bits + * are set to TS_WIDTH bytes (TS_WIDTH=2*188), + * then RPS_THRESH1 should be set to trigger + * every TS_HEIGHT (512) lines. + */ + saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 ); + + /* Enable RPS1 (rFC p33) */ + saa7146_write(dev, MC1, (MASK_13 | MASK_29)); + + /* end of budgetpatch register initialization */ + tasklet_init (&av7110->vpe_tasklet, vpeirq, (unsigned long) av7110); + } else { + saa7146_write(dev, PCI_BT_V1, 0x1c00101f); + saa7146_write(dev, BCS_CTRL, 0x80400040); + + /* set dd1 stream a & b */ + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, DD1_INIT, 0x03000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + /* upload all */ + saa7146_write(dev, MC2, 0x077c077c); + saa7146_write(dev, GPIO_CTRL, 0x000000); + } + + tasklet_init (&av7110->debi_tasklet, debiirq, (unsigned long) av7110); + tasklet_init (&av7110->gpio_tasklet, gpioirq, (unsigned long) av7110); + + mutex_init(&av7110->pid_mutex); + + /* locks for data transfers from/to AV7110 */ + spin_lock_init(&av7110->debilock); + mutex_init(&av7110->dcomlock); + av7110->debitype = -1; + + /* default OSD window */ + av7110->osdwin = 1; + mutex_init(&av7110->osd_mutex); + + /* TV standard */ + av7110->vidmode = tv_standard == 1 ? AV7110_VIDEO_MODE_NTSC + : AV7110_VIDEO_MODE_PAL; + + /* ARM "watchdog" */ + init_waitqueue_head(&av7110->arm_wait); + av7110->arm_thread = NULL; + + /* allocate and init buffers */ + av7110->debi_virt = pci_alloc_consistent(pdev, 8192, &av7110->debi_bus); + if (!av7110->debi_virt) + goto err_saa71466_vfree_4; + + + av7110->iobuf = vmalloc(AVOUTLEN+AOUTLEN+BMPLEN+4*IPACKS); + if (!av7110->iobuf) + goto err_pci_free_5; + + ret = av7110_av_init(av7110); + if (ret < 0) + goto err_iobuf_vfree_6; + + /* init BMP buffer */ + av7110->bmpbuf = av7110->iobuf+AVOUTLEN+AOUTLEN; + init_waitqueue_head(&av7110->bmpq); + + ret = av7110_ca_init(av7110); + if (ret < 0) + goto err_av7110_av_exit_7; + + /* load firmware into AV7110 cards */ + ret = av7110_bootarm(av7110); + if (ret < 0) + goto err_av7110_ca_exit_8; + + ret = av7110_firmversion(av7110); + if (ret < 0) + goto err_stop_arm_9; + + if (FW_VERSION(av7110->arm_app)<0x2501) + printk ("dvb-ttpci: Warning, firmware version 0x%04x is too old. " + "System might be unstable!\n", FW_VERSION(av7110->arm_app)); + + thread = kthread_run(arm_thread, (void *) av7110, "arm_mon"); + if (IS_ERR(thread)) { + ret = PTR_ERR(thread); + goto err_stop_arm_9; + } + av7110->arm_thread = thread; + + /* set initial volume in mixer struct */ + av7110->mixer.volume_left = volume; + av7110->mixer.volume_right = volume; + + ret = av7110_register(av7110); + if (ret < 0) + goto err_arm_thread_stop_10; + + init_av7110_av(av7110); + + /* special case DVB-C: these cards have an analog tuner + plus need some special handling, so we have separate + saa7146_ext_vv data for these... */ + ret = av7110_init_v4l(av7110); + if (ret < 0) + goto err_av7110_unregister_11; + + av7110->dvb_adapter.priv = av7110; + ret = frontend_init(av7110); + if (ret < 0) + goto err_av7110_exit_v4l_12; + + mutex_init(&av7110->ioctl_mutex); + +#if IS_ENABLED(CONFIG_INPUT_EVDEV) + av7110_ir_init(av7110); +#endif + printk(KERN_INFO "dvb-ttpci: found av7110-%d.\n", av7110_num); + av7110_num++; +out: + return ret; + +err_av7110_exit_v4l_12: + av7110_exit_v4l(av7110); +err_av7110_unregister_11: + dvb_unregister(av7110); +err_arm_thread_stop_10: + av7110_arm_sync(av7110); +err_stop_arm_9: + /* Nothing to do. Rejoice. */ +err_av7110_ca_exit_8: + av7110_ca_exit(av7110); +err_av7110_av_exit_7: + av7110_av_exit(av7110); +err_iobuf_vfree_6: + vfree(av7110->iobuf); +err_pci_free_5: + pci_free_consistent(pdev, 8192, av7110->debi_virt, av7110->debi_bus); +err_saa71466_vfree_4: + if (av7110->grabbing) + saa7146_vfree_destroy_pgtable(pdev, av7110->grabbing, &av7110->pt); +err_i2c_del_3: + i2c_del_adapter(&av7110->i2c_adap); +err_dvb_unregister_adapter_2: + dvb_unregister_adapter(&av7110->dvb_adapter); +err_put_firmware_1: + put_firmware(av7110); +err_kfree_0: + kfree(av7110); + goto out; +} + +static int av7110_detach(struct saa7146_dev* saa) +{ + struct av7110 *av7110 = saa->ext_priv; + dprintk(4, "%p\n", av7110); + +#if IS_ENABLED(CONFIG_INPUT_EVDEV) + av7110_ir_exit(av7110); +#endif + if (budgetpatch || av7110->full_ts) { + if (budgetpatch) { + /* Disable RPS1 */ + saa7146_write(saa, MC1, MASK_29); + /* VSYNC LOW (inactive) */ + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + } + saa7146_write(saa, MC1, MASK_20); /* DMA3 off */ + SAA7146_IER_DISABLE(saa, MASK_10); + SAA7146_ISR_CLEAR(saa, MASK_10); + msleep(50); + tasklet_kill(&av7110->vpe_tasklet); + saa7146_vfree_destroy_pgtable(saa->pci, av7110->grabbing, &av7110->pt); + } + av7110_exit_v4l(av7110); + + av7110_arm_sync(av7110); + + tasklet_kill(&av7110->debi_tasklet); + tasklet_kill(&av7110->gpio_tasklet); + + dvb_unregister(av7110); + + SAA7146_IER_DISABLE(saa, MASK_19 | MASK_03); + SAA7146_ISR_CLEAR(saa, MASK_19 | MASK_03); + + av7110_ca_exit(av7110); + av7110_av_exit(av7110); + + vfree(av7110->iobuf); + pci_free_consistent(saa->pci, 8192, av7110->debi_virt, + av7110->debi_bus); + + i2c_del_adapter(&av7110->i2c_adap); + + dvb_unregister_adapter (&av7110->dvb_adapter); + + av7110_num--; + + put_firmware(av7110); + + kfree(av7110); + + saa->ext_priv = NULL; + + return 0; +} + + +static void av7110_irq(struct saa7146_dev* dev, u32 *isr) +{ + struct av7110 *av7110 = dev->ext_priv; + + //print_time("av7110_irq"); + + /* Note: Don't try to handle the DEBI error irq (MASK_18), in + * intel mode the timeout is asserted all the time... + */ + + if (*isr & MASK_19) { + //printk("av7110_irq: DEBI\n"); + /* Note 1: The DEBI irq is level triggered: We must enable it + * only after we started a DMA xfer, and disable it here + * immediately, or it will be signalled all the time while + * DEBI is idle. + * Note 2: You would think that an irq which is masked is + * not signalled by the hardware. Not so for the SAA7146: + * An irq is signalled as long as the corresponding bit + * in the ISR is set, and disabling irqs just prevents the + * hardware from setting the ISR bit. This means a) that we + * must clear the ISR *after* disabling the irq (which is why + * we must do it here even though saa7146_core did it already), + * and b) that if we were to disable an edge triggered irq + * (like the gpio irqs sadly are) temporarily we would likely + * loose some. This sucks :-( + */ + SAA7146_IER_DISABLE(av7110->dev, MASK_19); + SAA7146_ISR_CLEAR(av7110->dev, MASK_19); + tasklet_schedule(&av7110->debi_tasklet); + } + + if (*isr & MASK_03) { + //printk("av7110_irq: GPIO\n"); + tasklet_schedule(&av7110->gpio_tasklet); + } + + if (*isr & MASK_10) + tasklet_schedule(&av7110->vpe_tasklet); +} + + +static struct saa7146_extension av7110_extension_driver; + +#define MAKE_AV7110_INFO(x_var,x_name) \ +static struct saa7146_pci_extension_data x_var = { \ + .ext_priv = x_name, \ + .ext = &av7110_extension_driver } + +MAKE_AV7110_INFO(tts_1_X_fsc,"Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C"); +MAKE_AV7110_INFO(ttt_1_X, "Technotrend/Hauppauge WinTV DVB-T rev1.X"); +MAKE_AV7110_INFO(ttc_1_X, "Technotrend/Hauppauge WinTV Nexus-CA rev1.X"); +MAKE_AV7110_INFO(ttc_2_X, "Technotrend/Hauppauge WinTV DVB-C rev2.X"); +MAKE_AV7110_INFO(tts_2_X, "Technotrend/Hauppauge WinTV Nexus-S rev2.X"); +MAKE_AV7110_INFO(tts_2_3, "Technotrend/Hauppauge WinTV Nexus-S rev2.3"); +MAKE_AV7110_INFO(tts_1_3se, "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE"); +MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T"); +MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C"); +MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6"); +MAKE_AV7110_INFO(gxs_1_3, "Galaxis DVB-S rev1.3"); + +static struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000), + MAKE_EXTENSION_PCI(tts_1_X_fsc, 0x13c2, 0x0000), + MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001), + MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002), + MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003), + MAKE_EXTENSION_PCI(gxs_1_3, 0x13c2, 0x0004), + MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006), + MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008), + MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a), + MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e), + MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002), + +/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1 +/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0009), UNDEFINED CARD */ // TT/Hauppauge WinTV Nexus-CA v???? + + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + + +static struct saa7146_extension av7110_extension_driver = { + .name = "av7110", + .flags = SAA7146_USE_I2C_IRQ, + + .module = THIS_MODULE, + .pci_tbl = &pci_tbl[0], + .attach = av7110_attach, + .detach = av7110_detach, + + .irq_mask = MASK_19 | MASK_03 | MASK_10, + .irq_func = av7110_irq, +}; + + +static int __init av7110_init(void) +{ + int retval; + retval = saa7146_register_extension(&av7110_extension_driver); + return retval; +} + + +static void __exit av7110_exit(void) +{ + saa7146_unregister_extension(&av7110_extension_driver); +} + +module_init(av7110_init); +module_exit(av7110_exit); + +MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by " + "Siemens, Technotrend, Hauppauge"); +MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/ttpci/av7110.h b/drivers/media/pci/ttpci/av7110.h new file mode 100644 index 00000000..ef3d9606 --- /dev/null +++ b/drivers/media/pci/ttpci/av7110.h @@ -0,0 +1,317 @@ +#ifndef _AV7110_H_ +#define _AV7110_H_ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "dvbdev.h" +#include "demux.h" +#include "dvb_demux.h" +#include "dmxdev.h" +#include "dvb_filter.h" +#include "dvb_net.h" +#include "dvb_ringbuffer.h" +#include "dvb_frontend.h" +#include "ves1820.h" +#include "ves1x93.h" +#include "stv0299.h" +#include "tda8083.h" +#include "sp8870.h" +#include "stv0297.h" +#include "l64781.h" + +#include + + +#define ANALOG_TUNER_VES1820 1 +#define ANALOG_TUNER_STV0297 2 + +extern int av7110_debug; + +#define dprintk(level,args...) \ + do { if ((av7110_debug & level)) { printk("dvb-ttpci: %s(): ", __func__); printk(args); } } while (0) + +#define MAXFILT 32 + +enum {AV_PES_STREAM, PS_STREAM, TS_STREAM, PES_STREAM}; + +enum av7110_video_mode { + AV7110_VIDEO_MODE_PAL = 0, + AV7110_VIDEO_MODE_NTSC = 1 +}; + +struct av7110_p2t { + u8 pes[TS_SIZE]; + u8 counter; + long int pos; + int frags; + struct dvb_demux_feed *feed; +}; + +/* video MPEG decoder events: */ +/* (code copied from dvb_frontend.c, should maybe be factored out...) */ +#define MAX_VIDEO_EVENT 8 +struct dvb_video_events { + struct video_event events[MAX_VIDEO_EVENT]; + int eventw; + int eventr; + int overflow; + wait_queue_head_t wait_queue; + spinlock_t lock; +}; + + +struct av7110; + +/* infrared remote control */ +struct infrared { + u16 key_map[256]; + struct input_dev *input_dev; + char input_phys[32]; + struct timer_list keyup_timer; + struct tasklet_struct ir_tasklet; + void (*ir_handler)(struct av7110 *av7110, u32 ircom); + u32 ir_command; + u32 ir_config; + u32 device_mask; + u8 protocol; + u8 inversion; + u16 last_key; + u16 last_toggle; + u8 delay_timer_finished; +}; + + +/* place to store all the necessary device information */ +struct av7110 { + + /* devices */ + + struct dvb_device dvb_dev; + struct dvb_net dvb_net; + + struct video_device *v4l_dev; + struct video_device *vbi_dev; + + struct saa7146_dev *dev; + + struct i2c_adapter i2c_adap; + + char *card_name; + + /* support for analog module of dvb-c */ + int analog_tuner_flags; + int current_input; + u32 current_freq; + + struct tasklet_struct debi_tasklet; + struct tasklet_struct gpio_tasklet; + + int adac_type; /* audio DAC type */ +#define DVB_ADAC_TI 0 +#define DVB_ADAC_CRYSTAL 1 +#define DVB_ADAC_MSP34x0 2 +#define DVB_ADAC_MSP34x5 3 +#define DVB_ADAC_NONE -1 + + + /* buffers */ + + void *iobuf; /* memory for all buffers */ + struct dvb_ringbuffer avout; /* buffer for video or A/V mux */ +#define AVOUTLEN (128*1024) + struct dvb_ringbuffer aout; /* buffer for audio */ +#define AOUTLEN (64*1024) + void *bmpbuf; +#define BMPLEN (8*32768+1024) + + /* bitmap buffers and states */ + + int bmpp; + int bmplen; + volatile int bmp_state; +#define BMP_NONE 0 +#define BMP_LOADING 1 +#define BMP_LOADED 2 + wait_queue_head_t bmpq; + + + /* DEBI and polled command interface */ + + spinlock_t debilock; + struct mutex dcomlock; + volatile int debitype; + volatile int debilen; + + + /* Recording and playback flags */ + + int rec_mode; + int playing; +#define RP_NONE 0 +#define RP_VIDEO 1 +#define RP_AUDIO 2 +#define RP_AV 3 + + + /* OSD */ + + int osdwin; /* currently active window */ + u16 osdbpp[8]; + struct mutex osd_mutex; + + /* CA */ + + ca_slot_info_t ci_slot[2]; + + enum av7110_video_mode vidmode; + struct dmxdev dmxdev; + struct dvb_demux demux; + + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + + /* for budget mode demux1 */ + struct dmxdev dmxdev1; + struct dvb_demux demux1; + struct dvb_net dvb_net1; + spinlock_t feedlock1; + int feeding1; + u32 ttbp; + unsigned char *grabbing; + struct saa7146_pgtable pt; + struct tasklet_struct vpe_tasklet; + bool full_ts; + + int fe_synced; + struct mutex pid_mutex; + + int video_blank; + struct video_status videostate; + u16 display_panscan; + int display_ar; + int trickmode; +#define TRICK_NONE 0 +#define TRICK_FAST 1 +#define TRICK_SLOW 2 +#define TRICK_FREEZE 3 + struct audio_status audiostate; + + struct dvb_demux_filter *handle2filter[32]; + struct av7110_p2t p2t_filter[MAXFILT]; + struct dvb_filter_pes2ts p2t[2]; + struct ipack ipack[2]; + u8 *kbuf[2]; + + int sinfo; + int feeding; + + int arm_errors; + int registered; + + + /* AV711X */ + + u32 arm_fw; + u32 arm_rtsl; + u32 arm_vid; + u32 arm_app; + u32 avtype; + int arm_ready; + struct task_struct *arm_thread; + wait_queue_head_t arm_wait; + u16 arm_loops; + + void *debi_virt; + dma_addr_t debi_bus; + + u16 pids[DMX_PES_OTHER]; + + struct dvb_ringbuffer ci_rbuffer; + struct dvb_ringbuffer ci_wbuffer; + + struct audio_mixer mixer; + + struct dvb_adapter dvb_adapter; + struct dvb_device *video_dev; + struct dvb_device *audio_dev; + struct dvb_device *ca_dev; + struct dvb_device *osd_dev; + + struct dvb_video_events video_events; + video_size_t video_size; + + u16 wssMode; + u16 wssData; + + struct infrared ir; + + /* firmware stuff */ + unsigned char *bin_fw; + unsigned long size_fw; + + unsigned char *bin_dpram; + unsigned long size_dpram; + + unsigned char *bin_root; + unsigned long size_root; + + struct dvb_frontend* fe; + fe_status_t fe_status; + + struct mutex ioctl_mutex; + + /* crash recovery */ + void (*recover)(struct av7110* av7110); + fe_sec_voltage_t saved_voltage; + fe_sec_tone_mode_t saved_tone; + struct dvb_diseqc_master_cmd saved_master_cmd; + fe_sec_mini_cmd_t saved_minicmd; + + int (*fe_init)(struct dvb_frontend* fe); + int (*fe_read_status)(struct dvb_frontend* fe, fe_status_t* status); + int (*fe_diseqc_reset_overload)(struct dvb_frontend* fe); + int (*fe_diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd); + int (*fe_diseqc_send_burst)(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd); + int (*fe_set_tone)(struct dvb_frontend* fe, fe_sec_tone_mode_t tone); + int (*fe_set_voltage)(struct dvb_frontend* fe, fe_sec_voltage_t voltage); + int (*fe_dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd); + int (*fe_set_frontend)(struct dvb_frontend *fe); +}; + + +extern int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, + u16 subpid, u16 pcrpid); + +extern int av7110_check_ir_config(struct av7110 *av7110, int force); +extern int av7110_ir_init(struct av7110 *av7110); +extern void av7110_ir_exit(struct av7110 *av7110); + +/* msp3400 i2c subaddresses */ +#define MSP_WR_DEM 0x10 +#define MSP_RD_DEM 0x11 +#define MSP_WR_DSP 0x12 +#define MSP_RD_DSP 0x13 + +extern int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val); +extern u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg); +extern int msp_writereg(struct av7110 *av7110, u8 dev, u16 reg, u16 val); + + +extern int av7110_init_analog_module(struct av7110 *av7110); +extern int av7110_init_v4l(struct av7110 *av7110); +extern int av7110_exit_v4l(struct av7110 *av7110); + +#endif /* _AV7110_H_ */ diff --git a/drivers/media/pci/ttpci/av7110_av.c b/drivers/media/pci/ttpci/av7110_av.c new file mode 100644 index 00000000..301029ca --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_av.c @@ -0,0 +1,1634 @@ +/* + * av7110_av.c: audio and video MPEG decoder stuff + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * originally based on code by: + * Copyright (C) 1998,1999 Christian Theiss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + +#include +#include +#include +#include +#include + +#include "av7110.h" +#include "av7110_hw.h" +#include "av7110_av.h" +#include "av7110_ipack.h" + +/* MPEG-2 (ISO 13818 / H.222.0) stream types */ +#define PROG_STREAM_MAP 0xBC +#define PRIVATE_STREAM1 0xBD +#define PADDING_STREAM 0xBE +#define PRIVATE_STREAM2 0xBF +#define AUDIO_STREAM_S 0xC0 +#define AUDIO_STREAM_E 0xDF +#define VIDEO_STREAM_S 0xE0 +#define VIDEO_STREAM_E 0xEF +#define ECM_STREAM 0xF0 +#define EMM_STREAM 0xF1 +#define DSM_CC_STREAM 0xF2 +#define ISO13522_STREAM 0xF3 +#define PROG_STREAM_DIR 0xFF + +#define PTS_DTS_FLAGS 0xC0 + +//pts_dts flags +#define PTS_ONLY 0x80 +#define PTS_DTS 0xC0 +#define TS_SIZE 188 +#define TRANS_ERROR 0x80 +#define PAY_START 0x40 +#define TRANS_PRIO 0x20 +#define PID_MASK_HI 0x1F +//flags +#define TRANS_SCRMBL1 0x80 +#define TRANS_SCRMBL2 0x40 +#define ADAPT_FIELD 0x20 +#define PAYLOAD 0x10 +#define COUNT_MASK 0x0F + +// adaptation flags +#define DISCON_IND 0x80 +#define RAND_ACC_IND 0x40 +#define ES_PRI_IND 0x20 +#define PCR_FLAG 0x10 +#define OPCR_FLAG 0x08 +#define SPLICE_FLAG 0x04 +#define TRANS_PRIV 0x02 +#define ADAP_EXT_FLAG 0x01 + +// adaptation extension flags +#define LTW_FLAG 0x80 +#define PIECE_RATE 0x40 +#define SEAM_SPLICE 0x20 + + +static void p_to_t(u8 const *buf, long int length, u16 pid, + u8 *counter, struct dvb_demux_feed *feed); +static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, size_t len); + + +int av7110_record_cb(struct dvb_filter_pes2ts *p2t, u8 *buf, size_t len) +{ + struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *) p2t->priv; + + if (!(dvbdmxfeed->ts_type & TS_PACKET)) + return 0; + if (buf[3] == 0xe0) // video PES do not have a length in TS + buf[4] = buf[5] = 0; + if (dvbdmxfeed->ts_type & TS_PAYLOAD_ONLY) + return dvbdmxfeed->cb.ts(buf, len, NULL, 0, + &dvbdmxfeed->feed.ts, DMX_OK); + else + return dvb_filter_pes2ts(p2t, buf, len, 1); +} + +static int dvb_filter_pes2ts_cb(void *priv, unsigned char *data) +{ + struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *) priv; + + dvbdmxfeed->cb.ts(data, 188, NULL, 0, + &dvbdmxfeed->feed.ts, DMX_OK); + return 0; +} + +int av7110_av_start_record(struct av7110 *av7110, int av, + struct dvb_demux_feed *dvbdmxfeed) +{ + int ret = 0; + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + + dprintk(2, "av7110:%p, , dvb_demux_feed:%p\n", av7110, dvbdmxfeed); + + if (av7110->playing || (av7110->rec_mode & av)) + return -EBUSY; + av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0); + dvbdmx->recording = 1; + av7110->rec_mode |= av; + + switch (av7110->rec_mode) { + case RP_AUDIO: + dvb_filter_pes2ts_init(&av7110->p2t[0], + dvbdmx->pesfilter[0]->pid, + dvb_filter_pes2ts_cb, + (void *) dvbdmx->pesfilter[0]); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AudioPES, 0); + break; + + case RP_VIDEO: + dvb_filter_pes2ts_init(&av7110->p2t[1], + dvbdmx->pesfilter[1]->pid, + dvb_filter_pes2ts_cb, + (void *) dvbdmx->pesfilter[1]); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, VideoPES, 0); + break; + + case RP_AV: + dvb_filter_pes2ts_init(&av7110->p2t[0], + dvbdmx->pesfilter[0]->pid, + dvb_filter_pes2ts_cb, + (void *) dvbdmx->pesfilter[0]); + dvb_filter_pes2ts_init(&av7110->p2t[1], + dvbdmx->pesfilter[1]->pid, + dvb_filter_pes2ts_cb, + (void *) dvbdmx->pesfilter[1]); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AV_PES, 0); + break; + } + return ret; +} + +int av7110_av_start_play(struct av7110 *av7110, int av) +{ + int ret = 0; + dprintk(2, "av7110:%p, \n", av7110); + + if (av7110->rec_mode) + return -EBUSY; + if (av7110->playing & av) + return -EBUSY; + + av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0); + + if (av7110->playing == RP_NONE) { + av7110_ipack_reset(&av7110->ipack[0]); + av7110_ipack_reset(&av7110->ipack[1]); + } + + av7110->playing |= av; + switch (av7110->playing) { + case RP_AUDIO: + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AudioPES, 0); + break; + case RP_VIDEO: + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, VideoPES, 0); + av7110->sinfo = 0; + break; + case RP_AV: + av7110->sinfo = 0; + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AV_PES, 0); + break; + } + return ret; +} + +int av7110_av_stop(struct av7110 *av7110, int av) +{ + int ret = 0; + dprintk(2, "av7110:%p, \n", av7110); + + if (!(av7110->playing & av) && !(av7110->rec_mode & av)) + return 0; + av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0); + if (av7110->playing) { + av7110->playing &= ~av; + switch (av7110->playing) { + case RP_AUDIO: + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AudioPES, 0); + break; + case RP_VIDEO: + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, VideoPES, 0); + break; + case RP_NONE: + ret = av7110_set_vidmode(av7110, av7110->vidmode); + break; + } + } else { + av7110->rec_mode &= ~av; + switch (av7110->rec_mode) { + case RP_AUDIO: + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AudioPES, 0); + break; + case RP_VIDEO: + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, VideoPES, 0); + break; + case RP_NONE: + break; + } + } + return ret; +} + + +int av7110_pes_play(void *dest, struct dvb_ringbuffer *buf, int dlen) +{ + int len; + u32 sync; + u16 blen; + + if (!dlen) { + wake_up(&buf->queue); + return -1; + } + while (1) { + len = dvb_ringbuffer_avail(buf); + if (len < 6) { + wake_up(&buf->queue); + return -1; + } + sync = DVB_RINGBUFFER_PEEK(buf, 0) << 24; + sync |= DVB_RINGBUFFER_PEEK(buf, 1) << 16; + sync |= DVB_RINGBUFFER_PEEK(buf, 2) << 8; + sync |= DVB_RINGBUFFER_PEEK(buf, 3); + + if (((sync &~ 0x0f) == 0x000001e0) || + ((sync &~ 0x1f) == 0x000001c0) || + (sync == 0x000001bd)) + break; + printk("resync\n"); + DVB_RINGBUFFER_SKIP(buf, 1); + } + blen = DVB_RINGBUFFER_PEEK(buf, 4) << 8; + blen |= DVB_RINGBUFFER_PEEK(buf, 5); + blen += 6; + if (len < blen || blen > dlen) { + //printk("buffer empty - avail %d blen %u dlen %d\n", len, blen, dlen); + wake_up(&buf->queue); + return -1; + } + + dvb_ringbuffer_read(buf, dest, (size_t) blen); + + dprintk(2, "pread=0x%08lx, pwrite=0x%08lx\n", + (unsigned long) buf->pread, (unsigned long) buf->pwrite); + wake_up(&buf->queue); + return blen; +} + + +int av7110_set_volume(struct av7110 *av7110, int volleft, int volright) +{ + int err, vol, val, balance = 0; + + dprintk(2, "av7110:%p, \n", av7110); + + av7110->mixer.volume_left = volleft; + av7110->mixer.volume_right = volright; + + switch (av7110->adac_type) { + case DVB_ADAC_TI: + volleft = (volleft * 256) / 1036; + volright = (volright * 256) / 1036; + if (volleft > 0x3f) + volleft = 0x3f; + if (volright > 0x3f) + volright = 0x3f; + if ((err = SendDAC(av7110, 3, 0x80 + volleft))) + return err; + return SendDAC(av7110, 4, volright); + + case DVB_ADAC_CRYSTAL: + volleft = 127 - volleft / 2; + volright = 127 - volright / 2; + i2c_writereg(av7110, 0x20, 0x03, volleft); + i2c_writereg(av7110, 0x20, 0x04, volright); + return 0; + + case DVB_ADAC_MSP34x0: + vol = (volleft > volright) ? volleft : volright; + val = (vol * 0x73 / 255) << 8; + if (vol > 0) + balance = ((volright - volleft) * 127) / vol; + msp_writereg(av7110, MSP_WR_DSP, 0x0001, balance << 8); + msp_writereg(av7110, MSP_WR_DSP, 0x0000, val); /* loudspeaker */ + msp_writereg(av7110, MSP_WR_DSP, 0x0006, val); /* headphonesr */ + return 0; + + case DVB_ADAC_MSP34x5: + vol = (volleft > volright) ? volleft : volright; + val = (vol * 0x73 / 255) << 8; + if (vol > 0) + balance = ((volright - volleft) * 127) / vol; + msp_writereg(av7110, MSP_WR_DSP, 0x0001, balance << 8); + msp_writereg(av7110, MSP_WR_DSP, 0x0000, val); /* loudspeaker */ + return 0; + } + + return 0; +} + +int av7110_set_vidmode(struct av7110 *av7110, enum av7110_video_mode mode) +{ + int ret; + dprintk(2, "av7110:%p, \n", av7110); + + ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, LoadVidCode, 1, mode); + + if (!ret && !av7110->playing) { + ret = ChangePIDs(av7110, av7110->pids[DMX_PES_VIDEO], + av7110->pids[DMX_PES_AUDIO], + av7110->pids[DMX_PES_TELETEXT], + 0, av7110->pids[DMX_PES_PCR]); + if (!ret) + ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); + } + return ret; +} + + +static enum av7110_video_mode sw2mode[16] = { + AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_NTSC, + AV7110_VIDEO_MODE_NTSC, AV7110_VIDEO_MODE_PAL, + AV7110_VIDEO_MODE_NTSC, AV7110_VIDEO_MODE_NTSC, + AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_NTSC, + AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_PAL, + AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_PAL, + AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_PAL, + AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_PAL, +}; + +static int get_video_format(struct av7110 *av7110, u8 *buf, int count) +{ + int i; + int hsize, vsize; + int sw; + u8 *p; + int ret = 0; + + dprintk(2, "av7110:%p, \n", av7110); + + if (av7110->sinfo) + return 0; + for (i = 7; i < count - 10; i++) { + p = buf + i; + if (p[0] || p[1] || p[2] != 0x01 || p[3] != 0xb3) + continue; + p += 4; + hsize = ((p[1] &0xF0) >> 4) | (p[0] << 4); + vsize = ((p[1] &0x0F) << 8) | (p[2]); + sw = (p[3] & 0x0F); + ret = av7110_set_vidmode(av7110, sw2mode[sw]); + if (!ret) { + dprintk(2, "playback %dx%d fr=%d\n", hsize, vsize, sw); + av7110->sinfo = 1; + } + break; + } + return ret; +} + + +/**************************************************************************** + * I/O buffer management and control + ****************************************************************************/ + +static inline long aux_ring_buffer_write(struct dvb_ringbuffer *rbuf, + const u8 *buf, unsigned long count) +{ + unsigned long todo = count; + int free; + + while (todo > 0) { + if (dvb_ringbuffer_free(rbuf) < 2048) { + if (wait_event_interruptible(rbuf->queue, + (dvb_ringbuffer_free(rbuf) >= 2048))) + return count - todo; + } + free = dvb_ringbuffer_free(rbuf); + if (free > todo) + free = todo; + dvb_ringbuffer_write(rbuf, buf, free); + todo -= free; + buf += free; + } + + return count - todo; +} + +static void play_video_cb(u8 *buf, int count, void *priv) +{ + struct av7110 *av7110 = (struct av7110 *) priv; + dprintk(2, "av7110:%p, \n", av7110); + + if ((buf[3] & 0xe0) == 0xe0) { + get_video_format(av7110, buf, count); + aux_ring_buffer_write(&av7110->avout, buf, count); + } else + aux_ring_buffer_write(&av7110->aout, buf, count); +} + +static void play_audio_cb(u8 *buf, int count, void *priv) +{ + struct av7110 *av7110 = (struct av7110 *) priv; + dprintk(2, "av7110:%p, \n", av7110); + + aux_ring_buffer_write(&av7110->aout, buf, count); +} + + +#define FREE_COND_TS (dvb_ringbuffer_free(rb) >= 4096) + +static ssize_t ts_play(struct av7110 *av7110, const char __user *buf, + unsigned long count, int nonblock, int type) +{ + struct dvb_ringbuffer *rb; + u8 *kb; + unsigned long todo = count; + + dprintk(2, "%s: type %d cnt %lu\n", __func__, type, count); + + rb = (type) ? &av7110->avout : &av7110->aout; + kb = av7110->kbuf[type]; + + if (!kb) + return -ENOBUFS; + + if (nonblock && !FREE_COND_TS) + return -EWOULDBLOCK; + + while (todo >= TS_SIZE) { + if (!FREE_COND_TS) { + if (nonblock) + return count - todo; + if (wait_event_interruptible(rb->queue, FREE_COND_TS)) + return count - todo; + } + if (copy_from_user(kb, buf, TS_SIZE)) + return -EFAULT; + write_ts_to_decoder(av7110, type, kb, TS_SIZE); + todo -= TS_SIZE; + buf += TS_SIZE; + } + + return count - todo; +} + + +#define FREE_COND (dvb_ringbuffer_free(&av7110->avout) >= 20 * 1024 && \ + dvb_ringbuffer_free(&av7110->aout) >= 20 * 1024) + +static ssize_t dvb_play(struct av7110 *av7110, const char __user *buf, + unsigned long count, int nonblock, int type) +{ + unsigned long todo = count, n; + dprintk(2, "av7110:%p, \n", av7110); + + if (!av7110->kbuf[type]) + return -ENOBUFS; + + if (nonblock && !FREE_COND) + return -EWOULDBLOCK; + + while (todo > 0) { + if (!FREE_COND) { + if (nonblock) + return count - todo; + if (wait_event_interruptible(av7110->avout.queue, + FREE_COND)) + return count - todo; + } + n = todo; + if (n > IPACKS * 2) + n = IPACKS * 2; + if (copy_from_user(av7110->kbuf[type], buf, n)) + return -EFAULT; + av7110_ipack_instant_repack(av7110->kbuf[type], n, + &av7110->ipack[type]); + todo -= n; + buf += n; + } + return count - todo; +} + +static ssize_t dvb_play_kernel(struct av7110 *av7110, const u8 *buf, + unsigned long count, int nonblock, int type) +{ + unsigned long todo = count, n; + dprintk(2, "av7110:%p, \n", av7110); + + if (!av7110->kbuf[type]) + return -ENOBUFS; + + if (nonblock && !FREE_COND) + return -EWOULDBLOCK; + + while (todo > 0) { + if (!FREE_COND) { + if (nonblock) + return count - todo; + if (wait_event_interruptible(av7110->avout.queue, + FREE_COND)) + return count - todo; + } + n = todo; + if (n > IPACKS * 2) + n = IPACKS * 2; + av7110_ipack_instant_repack(buf, n, &av7110->ipack[type]); + todo -= n; + buf += n; + } + return count - todo; +} + +static ssize_t dvb_aplay(struct av7110 *av7110, const char __user *buf, + unsigned long count, int nonblock, int type) +{ + unsigned long todo = count, n; + dprintk(2, "av7110:%p, \n", av7110); + + if (!av7110->kbuf[type]) + return -ENOBUFS; + if (nonblock && dvb_ringbuffer_free(&av7110->aout) < 20 * 1024) + return -EWOULDBLOCK; + + while (todo > 0) { + if (dvb_ringbuffer_free(&av7110->aout) < 20 * 1024) { + if (nonblock) + return count - todo; + if (wait_event_interruptible(av7110->aout.queue, + (dvb_ringbuffer_free(&av7110->aout) >= 20 * 1024))) + return count-todo; + } + n = todo; + if (n > IPACKS * 2) + n = IPACKS * 2; + if (copy_from_user(av7110->kbuf[type], buf, n)) + return -EFAULT; + av7110_ipack_instant_repack(av7110->kbuf[type], n, + &av7110->ipack[type]); + todo -= n; + buf += n; + } + return count - todo; +} + +void av7110_p2t_init(struct av7110_p2t *p, struct dvb_demux_feed *feed) +{ + memset(p->pes, 0, TS_SIZE); + p->counter = 0; + p->pos = 0; + p->frags = 0; + if (feed) + p->feed = feed; +} + +static void clear_p2t(struct av7110_p2t *p) +{ + memset(p->pes, 0, TS_SIZE); +// p->counter = 0; + p->pos = 0; + p->frags = 0; +} + + +static int find_pes_header(u8 const *buf, long int length, int *frags) +{ + int c = 0; + int found = 0; + + *frags = 0; + + while (c < length - 3 && !found) { + if (buf[c] == 0x00 && buf[c + 1] == 0x00 && + buf[c + 2] == 0x01) { + switch ( buf[c + 3] ) { + case PROG_STREAM_MAP: + case PRIVATE_STREAM2: + case PROG_STREAM_DIR: + case ECM_STREAM : + case EMM_STREAM : + case PADDING_STREAM : + case DSM_CC_STREAM : + case ISO13522_STREAM: + case PRIVATE_STREAM1: + case AUDIO_STREAM_S ... AUDIO_STREAM_E: + case VIDEO_STREAM_S ... VIDEO_STREAM_E: + found = 1; + break; + + default: + c++; + break; + } + } else + c++; + } + if (c == length - 3 && !found) { + if (buf[length - 1] == 0x00) + *frags = 1; + if (buf[length - 2] == 0x00 && + buf[length - 1] == 0x00) + *frags = 2; + if (buf[length - 3] == 0x00 && + buf[length - 2] == 0x00 && + buf[length - 1] == 0x01) + *frags = 3; + return -1; + } + + return c; +} + +void av7110_p2t_write(u8 const *buf, long int length, u16 pid, struct av7110_p2t *p) +{ + int c, c2, l, add; + int check, rest; + + c = 0; + c2 = 0; + if (p->frags){ + check = 0; + switch(p->frags) { + case 1: + if (buf[c] == 0x00 && buf[c + 1] == 0x01) { + check = 1; + c += 2; + } + break; + case 2: + if (buf[c] == 0x01) { + check = 1; + c++; + } + break; + case 3: + check = 1; + } + if (check) { + switch (buf[c]) { + case PROG_STREAM_MAP: + case PRIVATE_STREAM2: + case PROG_STREAM_DIR: + case ECM_STREAM : + case EMM_STREAM : + case PADDING_STREAM : + case DSM_CC_STREAM : + case ISO13522_STREAM: + case PRIVATE_STREAM1: + case AUDIO_STREAM_S ... AUDIO_STREAM_E: + case VIDEO_STREAM_S ... VIDEO_STREAM_E: + p->pes[0] = 0x00; + p->pes[1] = 0x00; + p->pes[2] = 0x01; + p->pes[3] = buf[c]; + p->pos = 4; + memcpy(p->pes + p->pos, buf + c, (TS_SIZE - 4) - p->pos); + c += (TS_SIZE - 4) - p->pos; + p_to_t(p->pes, (TS_SIZE - 4), pid, &p->counter, p->feed); + clear_p2t(p); + break; + + default: + c = 0; + break; + } + } + p->frags = 0; + } + + if (p->pos) { + c2 = find_pes_header(buf + c, length - c, &p->frags); + if (c2 >= 0 && c2 < (TS_SIZE - 4) - p->pos) + l = c2+c; + else + l = (TS_SIZE - 4) - p->pos; + memcpy(p->pes + p->pos, buf, l); + c += l; + p->pos += l; + p_to_t(p->pes, p->pos, pid, &p->counter, p->feed); + clear_p2t(p); + } + + add = 0; + while (c < length) { + c2 = find_pes_header(buf + c + add, length - c - add, &p->frags); + if (c2 >= 0) { + c2 += c + add; + if (c2 > c){ + p_to_t(buf + c, c2 - c, pid, &p->counter, p->feed); + c = c2; + clear_p2t(p); + add = 0; + } else + add = 1; + } else { + l = length - c; + rest = l % (TS_SIZE - 4); + l -= rest; + p_to_t(buf + c, l, pid, &p->counter, p->feed); + memcpy(p->pes, buf + c + l, rest); + p->pos = rest; + c = length; + } + } +} + + +static int write_ts_header2(u16 pid, u8 *counter, int pes_start, u8 *buf, u8 length) +{ + int i; + int c = 0; + int fill; + u8 tshead[4] = { 0x47, 0x00, 0x00, 0x10 }; + + fill = (TS_SIZE - 4) - length; + if (pes_start) + tshead[1] = 0x40; + if (fill) + tshead[3] = 0x30; + tshead[1] |= (u8)((pid & 0x1F00) >> 8); + tshead[2] |= (u8)(pid & 0x00FF); + tshead[3] |= ((*counter)++ & 0x0F); + memcpy(buf, tshead, 4); + c += 4; + + if (fill) { + buf[4] = fill - 1; + c++; + if (fill > 1) { + buf[5] = 0x00; + c++; + } + for (i = 6; i < fill + 4; i++) { + buf[i] = 0xFF; + c++; + } + } + + return c; +} + + +static void p_to_t(u8 const *buf, long int length, u16 pid, u8 *counter, + struct dvb_demux_feed *feed) +{ + int l, pes_start; + u8 obuf[TS_SIZE]; + long c = 0; + + pes_start = 0; + if (length > 3 && + buf[0] == 0x00 && buf[1] == 0x00 && buf[2] == 0x01) + switch (buf[3]) { + case PROG_STREAM_MAP: + case PRIVATE_STREAM2: + case PROG_STREAM_DIR: + case ECM_STREAM : + case EMM_STREAM : + case PADDING_STREAM : + case DSM_CC_STREAM : + case ISO13522_STREAM: + case PRIVATE_STREAM1: + case AUDIO_STREAM_S ... AUDIO_STREAM_E: + case VIDEO_STREAM_S ... VIDEO_STREAM_E: + pes_start = 1; + break; + + default: + break; + } + + while (c < length) { + memset(obuf, 0, TS_SIZE); + if (length - c >= (TS_SIZE - 4)){ + l = write_ts_header2(pid, counter, pes_start, + obuf, (TS_SIZE - 4)); + memcpy(obuf + l, buf + c, TS_SIZE - l); + c += TS_SIZE - l; + } else { + l = write_ts_header2(pid, counter, pes_start, + obuf, length - c); + memcpy(obuf + l, buf + c, TS_SIZE - l); + c = length; + } + feed->cb.ts(obuf, 188, NULL, 0, &feed->feed.ts, DMX_OK); + pes_start = 0; + } +} + + +static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, size_t len) +{ + struct ipack *ipack = &av7110->ipack[type]; + + if (buf[1] & TRANS_ERROR) { + av7110_ipack_reset(ipack); + return -1; + } + + if (!(buf[3] & PAYLOAD)) + return -1; + + if (buf[1] & PAY_START) + av7110_ipack_flush(ipack); + + if (buf[3] & ADAPT_FIELD) { + len -= buf[4] + 1; + buf += buf[4] + 1; + if (!len) + return 0; + } + + av7110_ipack_instant_repack(buf + 4, len - 4, ipack); + return 0; +} + + +int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t len) +{ + struct dvb_demux *demux = feed->demux; + struct av7110 *av7110 = (struct av7110 *) demux->priv; + + dprintk(2, "av7110:%p, \n", av7110); + + if (av7110->full_ts && demux->dmx.frontend->source != DMX_MEMORY_FE) + return 0; + + switch (feed->pes_type) { + case 0: + if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY) + return -EINVAL; + break; + case 1: + if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY) + return -EINVAL; + break; + default: + return -1; + } + + return write_ts_to_decoder(av7110, feed->pes_type, buf, len); +} + + + +/****************************************************************************** + * Video MPEG decoder events + ******************************************************************************/ +void dvb_video_add_event(struct av7110 *av7110, struct video_event *event) +{ + struct dvb_video_events *events = &av7110->video_events; + int wp; + + spin_lock_bh(&events->lock); + + wp = (events->eventw + 1) % MAX_VIDEO_EVENT; + if (wp == events->eventr) { + events->overflow = 1; + events->eventr = (events->eventr + 1) % MAX_VIDEO_EVENT; + } + + //FIXME: timestamp? + memcpy(&events->events[events->eventw], event, sizeof(struct video_event)); + events->eventw = wp; + + spin_unlock_bh(&events->lock); + + wake_up_interruptible(&events->wait_queue); +} + + +static int dvb_video_get_event (struct av7110 *av7110, struct video_event *event, int flags) +{ + struct dvb_video_events *events = &av7110->video_events; + + if (events->overflow) { + events->overflow = 0; + return -EOVERFLOW; + } + if (events->eventw == events->eventr) { + int ret; + + if (flags & O_NONBLOCK) + return -EWOULDBLOCK; + + ret = wait_event_interruptible(events->wait_queue, + events->eventw != events->eventr); + if (ret < 0) + return ret; + } + + spin_lock_bh(&events->lock); + + memcpy(event, &events->events[events->eventr], + sizeof(struct video_event)); + events->eventr = (events->eventr + 1) % MAX_VIDEO_EVENT; + + spin_unlock_bh(&events->lock); + + return 0; +} + + +/****************************************************************************** + * DVB device file operations + ******************************************************************************/ + +static unsigned int dvb_video_poll(struct file *file, poll_table *wait) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + unsigned int mask = 0; + + dprintk(2, "av7110:%p, \n", av7110); + + if ((file->f_flags & O_ACCMODE) != O_RDONLY) + poll_wait(file, &av7110->avout.queue, wait); + + poll_wait(file, &av7110->video_events.wait_queue, wait); + + if (av7110->video_events.eventw != av7110->video_events.eventr) + mask = POLLPRI; + + if ((file->f_flags & O_ACCMODE) != O_RDONLY) { + if (av7110->playing) { + if (FREE_COND) + mask |= (POLLOUT | POLLWRNORM); + } else /* if not playing: may play if asked for */ + mask |= (POLLOUT | POLLWRNORM); + } + + return mask; +} + +static ssize_t dvb_video_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + unsigned char c; + + dprintk(2, "av7110:%p, \n", av7110); + + if ((file->f_flags & O_ACCMODE) == O_RDONLY) + return -EPERM; + + if (av7110->videostate.stream_source != VIDEO_SOURCE_MEMORY) + return -EPERM; + + if (get_user(c, buf)) + return -EFAULT; + if (c == 0x47 && count % TS_SIZE == 0) + return ts_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 1); + else + return dvb_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 1); +} + +static unsigned int dvb_audio_poll(struct file *file, poll_table *wait) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + unsigned int mask = 0; + + dprintk(2, "av7110:%p, \n", av7110); + + poll_wait(file, &av7110->aout.queue, wait); + + if (av7110->playing) { + if (dvb_ringbuffer_free(&av7110->aout) >= 20 * 1024) + mask |= (POLLOUT | POLLWRNORM); + } else /* if not playing: may play if asked for */ + mask = (POLLOUT | POLLWRNORM); + + return mask; +} + +static ssize_t dvb_audio_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + unsigned char c; + + dprintk(2, "av7110:%p, \n", av7110); + + if (av7110->audiostate.stream_source != AUDIO_SOURCE_MEMORY) { + printk(KERN_ERR "not audio source memory\n"); + return -EPERM; + } + + if (get_user(c, buf)) + return -EFAULT; + if (c == 0x47 && count % TS_SIZE == 0) + return ts_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 0); + else + return dvb_aplay(av7110, buf, count, file->f_flags & O_NONBLOCK, 0); +} + +static u8 iframe_header[] = { 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x80, 0x00, 0x00 }; + +#define MIN_IFRAME 400000 + +static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock) +{ + unsigned i, n; + int progressive = 0; + int match = 0; + + dprintk(2, "av7110:%p, \n", av7110); + + if (!(av7110->playing & RP_VIDEO)) { + if (av7110_av_start_play(av7110, RP_VIDEO) < 0) + return -EBUSY; + } + + /* search in buf for instances of 00 00 01 b5 1? */ + for (i = 0; i < len; i++) { + unsigned char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (match == 5) { + progressive = c & 0x08; + match = 0; + } + if (c == 0x00) { + match = (match == 1 || match == 2) ? 2 : 1; + continue; + } + switch (match++) { + case 2: if (c == 0x01) + continue; + break; + case 3: if (c == 0xb5) + continue; + break; + case 4: if ((c & 0xf0) == 0x10) + continue; + break; + } + match = 0; + } + + /* setting n always > 1, fixes problems when playing stillframes + consisting of I- and P-Frames */ + n = MIN_IFRAME / len + 1; + + /* FIXME: nonblock? */ + dvb_play_kernel(av7110, iframe_header, sizeof(iframe_header), 0, 1); + + for (i = 0; i < n; i++) + dvb_play(av7110, buf, len, 0, 1); + + av7110_ipack_flush(&av7110->ipack[1]); + + if (progressive) + return vidcom(av7110, AV_VIDEO_CMD_FREEZE, 1); + else + return 0; +} + + +static int dvb_video_ioctl(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + unsigned long arg = (unsigned long) parg; + int ret = 0; + + dprintk(1, "av7110:%p, cmd=%04x\n", av7110,cmd); + + if ((file->f_flags & O_ACCMODE) == O_RDONLY) { + if ( cmd != VIDEO_GET_STATUS && cmd != VIDEO_GET_EVENT && + cmd != VIDEO_GET_SIZE ) { + return -EPERM; + } + } + + if (mutex_lock_interruptible(&av7110->ioctl_mutex)) + return -ERESTARTSYS; + + switch (cmd) { + case VIDEO_STOP: + av7110->videostate.play_state = VIDEO_STOPPED; + if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY) + ret = av7110_av_stop(av7110, RP_VIDEO); + else + ret = vidcom(av7110, AV_VIDEO_CMD_STOP, + av7110->videostate.video_blank ? 0 : 1); + if (!ret) + av7110->trickmode = TRICK_NONE; + break; + + case VIDEO_PLAY: + av7110->trickmode = TRICK_NONE; + if (av7110->videostate.play_state == VIDEO_FREEZED) { + av7110->videostate.play_state = VIDEO_PLAYING; + ret = vidcom(av7110, AV_VIDEO_CMD_PLAY, 0); + if (ret) + break; + } + if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY) { + if (av7110->playing == RP_AV) { + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0); + if (ret) + break; + av7110->playing &= ~RP_VIDEO; + } + ret = av7110_av_start_play(av7110, RP_VIDEO); + } + if (!ret) + ret = vidcom(av7110, AV_VIDEO_CMD_PLAY, 0); + if (!ret) + av7110->videostate.play_state = VIDEO_PLAYING; + break; + + case VIDEO_FREEZE: + av7110->videostate.play_state = VIDEO_FREEZED; + if (av7110->playing & RP_VIDEO) + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Pause, 0); + else + ret = vidcom(av7110, AV_VIDEO_CMD_FREEZE, 1); + if (!ret) + av7110->trickmode = TRICK_FREEZE; + break; + + case VIDEO_CONTINUE: + if (av7110->playing & RP_VIDEO) + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Continue, 0); + if (!ret) + ret = vidcom(av7110, AV_VIDEO_CMD_PLAY, 0); + if (!ret) { + av7110->videostate.play_state = VIDEO_PLAYING; + av7110->trickmode = TRICK_NONE; + } + break; + + case VIDEO_SELECT_SOURCE: + av7110->videostate.stream_source = (video_stream_source_t) arg; + break; + + case VIDEO_SET_BLANK: + av7110->videostate.video_blank = (int) arg; + break; + + case VIDEO_GET_STATUS: + memcpy(parg, &av7110->videostate, sizeof(struct video_status)); + break; + + case VIDEO_GET_EVENT: + ret = dvb_video_get_event(av7110, parg, file->f_flags); + break; + + case VIDEO_GET_SIZE: + memcpy(parg, &av7110->video_size, sizeof(video_size_t)); + break; + + case VIDEO_SET_DISPLAY_FORMAT: + { + video_displayformat_t format = (video_displayformat_t) arg; + switch (format) { + case VIDEO_PAN_SCAN: + av7110->display_panscan = VID_PAN_SCAN_PREF; + break; + case VIDEO_LETTER_BOX: + av7110->display_panscan = VID_VC_AND_PS_PREF; + break; + case VIDEO_CENTER_CUT_OUT: + av7110->display_panscan = VID_CENTRE_CUT_PREF; + break; + default: + ret = -EINVAL; + } + if (ret < 0) + break; + av7110->videostate.display_format = format; + ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetPanScanType, + 1, av7110->display_panscan); + break; + } + + case VIDEO_SET_FORMAT: + if (arg > 1) { + ret = -EINVAL; + break; + } + av7110->display_ar = arg; + ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetMonitorType, + 1, (u16) arg); + break; + + case VIDEO_STILLPICTURE: + { + struct video_still_picture *pic = + (struct video_still_picture *) parg; + av7110->videostate.stream_source = VIDEO_SOURCE_MEMORY; + dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout); + ret = play_iframe(av7110, pic->iFrame, pic->size, + file->f_flags & O_NONBLOCK); + break; + } + + case VIDEO_FAST_FORWARD: + //note: arg is ignored by firmware + if (av7110->playing & RP_VIDEO) + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Scan_I, 2, AV_PES, 0); + else + ret = vidcom(av7110, AV_VIDEO_CMD_FFWD, arg); + if (!ret) { + av7110->trickmode = TRICK_FAST; + av7110->videostate.play_state = VIDEO_PLAYING; + } + break; + + case VIDEO_SLOWMOTION: + if (av7110->playing&RP_VIDEO) { + if (av7110->trickmode != TRICK_SLOW) + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Slow, 2, 0, 0); + if (!ret) + ret = vidcom(av7110, AV_VIDEO_CMD_SLOW, arg); + } else { + ret = vidcom(av7110, AV_VIDEO_CMD_PLAY, 0); + if (!ret) + ret = vidcom(av7110, AV_VIDEO_CMD_STOP, 0); + if (!ret) + ret = vidcom(av7110, AV_VIDEO_CMD_SLOW, arg); + } + if (!ret) { + av7110->trickmode = TRICK_SLOW; + av7110->videostate.play_state = VIDEO_PLAYING; + } + break; + + case VIDEO_GET_CAPABILITIES: + *(int *)parg = VIDEO_CAP_MPEG1 | VIDEO_CAP_MPEG2 | + VIDEO_CAP_SYS | VIDEO_CAP_PROG; + break; + + case VIDEO_CLEAR_BUFFER: + dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout); + av7110_ipack_reset(&av7110->ipack[1]); + if (av7110->playing == RP_AV) { + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Play, 2, AV_PES, 0); + if (ret) + break; + if (av7110->trickmode == TRICK_FAST) + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Scan_I, 2, AV_PES, 0); + if (av7110->trickmode == TRICK_SLOW) { + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Slow, 2, 0, 0); + if (!ret) + ret = vidcom(av7110, AV_VIDEO_CMD_SLOW, arg); + } + if (av7110->trickmode == TRICK_FREEZE) + ret = vidcom(av7110, AV_VIDEO_CMD_STOP, 1); + } + break; + + case VIDEO_SET_STREAMTYPE: + break; + + default: + ret = -ENOIOCTLCMD; + break; + } + + mutex_unlock(&av7110->ioctl_mutex); + return ret; +} + +static int dvb_audio_ioctl(struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + unsigned long arg = (unsigned long) parg; + int ret = 0; + + dprintk(1, "av7110:%p, cmd=%04x\n", av7110,cmd); + + if (((file->f_flags & O_ACCMODE) == O_RDONLY) && + (cmd != AUDIO_GET_STATUS)) + return -EPERM; + + if (mutex_lock_interruptible(&av7110->ioctl_mutex)) + return -ERESTARTSYS; + + switch (cmd) { + case AUDIO_STOP: + if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY) + ret = av7110_av_stop(av7110, RP_AUDIO); + else + ret = audcom(av7110, AUDIO_CMD_MUTE); + if (!ret) + av7110->audiostate.play_state = AUDIO_STOPPED; + break; + + case AUDIO_PLAY: + if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY) + ret = av7110_av_start_play(av7110, RP_AUDIO); + if (!ret) + ret = audcom(av7110, AUDIO_CMD_UNMUTE); + if (!ret) + av7110->audiostate.play_state = AUDIO_PLAYING; + break; + + case AUDIO_PAUSE: + ret = audcom(av7110, AUDIO_CMD_MUTE); + if (!ret) + av7110->audiostate.play_state = AUDIO_PAUSED; + break; + + case AUDIO_CONTINUE: + if (av7110->audiostate.play_state == AUDIO_PAUSED) { + av7110->audiostate.play_state = AUDIO_PLAYING; + ret = audcom(av7110, AUDIO_CMD_UNMUTE | AUDIO_CMD_PCM16); + } + break; + + case AUDIO_SELECT_SOURCE: + av7110->audiostate.stream_source = (audio_stream_source_t) arg; + break; + + case AUDIO_SET_MUTE: + { + ret = audcom(av7110, arg ? AUDIO_CMD_MUTE : AUDIO_CMD_UNMUTE); + if (!ret) + av7110->audiostate.mute_state = (int) arg; + break; + } + + case AUDIO_SET_AV_SYNC: + av7110->audiostate.AV_sync_state = (int) arg; + ret = audcom(av7110, arg ? AUDIO_CMD_SYNC_ON : AUDIO_CMD_SYNC_OFF); + break; + + case AUDIO_SET_BYPASS_MODE: + if (FW_VERSION(av7110->arm_app) < 0x2621) + ret = -EINVAL; + av7110->audiostate.bypass_mode = (int)arg; + break; + + case AUDIO_CHANNEL_SELECT: + av7110->audiostate.channel_select = (audio_channel_select_t) arg; + switch(av7110->audiostate.channel_select) { + case AUDIO_STEREO: + ret = audcom(av7110, AUDIO_CMD_STEREO); + if (!ret) { + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x49); + else if (av7110->adac_type == DVB_ADAC_MSP34x5) + msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220); + } + break; + case AUDIO_MONO_LEFT: + ret = audcom(av7110, AUDIO_CMD_MONO_L); + if (!ret) { + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x4a); + else if (av7110->adac_type == DVB_ADAC_MSP34x5) + msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0200); + } + break; + case AUDIO_MONO_RIGHT: + ret = audcom(av7110, AUDIO_CMD_MONO_R); + if (!ret) { + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x45); + else if (av7110->adac_type == DVB_ADAC_MSP34x5) + msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0210); + } + break; + default: + ret = -EINVAL; + break; + } + break; + + case AUDIO_GET_STATUS: + memcpy(parg, &av7110->audiostate, sizeof(struct audio_status)); + break; + + case AUDIO_GET_CAPABILITIES: + if (FW_VERSION(av7110->arm_app) < 0x2621) + *(unsigned int *)parg = AUDIO_CAP_LPCM | AUDIO_CAP_MP1 | AUDIO_CAP_MP2; + else + *(unsigned int *)parg = AUDIO_CAP_LPCM | AUDIO_CAP_DTS | AUDIO_CAP_AC3 | + AUDIO_CAP_MP1 | AUDIO_CAP_MP2; + break; + + case AUDIO_CLEAR_BUFFER: + dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout); + av7110_ipack_reset(&av7110->ipack[0]); + if (av7110->playing == RP_AV) + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Play, 2, AV_PES, 0); + break; + + case AUDIO_SET_ID: + break; + + case AUDIO_SET_MIXER: + { + struct audio_mixer *amix = (struct audio_mixer *)parg; + ret = av7110_set_volume(av7110, amix->volume_left, amix->volume_right); + break; + } + + case AUDIO_SET_STREAMTYPE: + break; + + default: + ret = -ENOIOCTLCMD; + } + + mutex_unlock(&av7110->ioctl_mutex); + return ret; +} + + +static int dvb_video_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + int err; + + dprintk(2, "av7110:%p, \n", av7110); + + if ((err = dvb_generic_open(inode, file)) < 0) + return err; + + if ((file->f_flags & O_ACCMODE) != O_RDONLY) { + dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout); + dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout); + av7110->video_blank = 1; + av7110->audiostate.AV_sync_state = 1; + av7110->videostate.stream_source = VIDEO_SOURCE_DEMUX; + + /* empty event queue */ + av7110->video_events.eventr = av7110->video_events.eventw = 0; + } + + return 0; +} + +static int dvb_video_release(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + + dprintk(2, "av7110:%p, \n", av7110); + + if ((file->f_flags & O_ACCMODE) != O_RDONLY) { + av7110_av_stop(av7110, RP_VIDEO); + } + + return dvb_generic_release(inode, file); +} + +static int dvb_audio_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + int err = dvb_generic_open(inode, file); + + dprintk(2, "av7110:%p, \n", av7110); + + if (err < 0) + return err; + dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout); + av7110->audiostate.stream_source = AUDIO_SOURCE_DEMUX; + return 0; +} + +static int dvb_audio_release(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + + dprintk(2, "av7110:%p, \n", av7110); + + av7110_av_stop(av7110, RP_AUDIO); + return dvb_generic_release(inode, file); +} + + + +/****************************************************************************** + * driver registration + ******************************************************************************/ + +static const struct file_operations dvb_video_fops = { + .owner = THIS_MODULE, + .write = dvb_video_write, + .unlocked_ioctl = dvb_generic_ioctl, + .open = dvb_video_open, + .release = dvb_video_release, + .poll = dvb_video_poll, + .llseek = noop_llseek, +}; + +static struct dvb_device dvbdev_video = { + .priv = NULL, + .users = 6, + .readers = 5, /* arbitrary */ + .writers = 1, + .fops = &dvb_video_fops, + .kernel_ioctl = dvb_video_ioctl, +}; + +static const struct file_operations dvb_audio_fops = { + .owner = THIS_MODULE, + .write = dvb_audio_write, + .unlocked_ioctl = dvb_generic_ioctl, + .open = dvb_audio_open, + .release = dvb_audio_release, + .poll = dvb_audio_poll, + .llseek = noop_llseek, +}; + +static struct dvb_device dvbdev_audio = { + .priv = NULL, + .users = 1, + .writers = 1, + .fops = &dvb_audio_fops, + .kernel_ioctl = dvb_audio_ioctl, +}; + + +int av7110_av_register(struct av7110 *av7110) +{ + av7110->audiostate.AV_sync_state = 0; + av7110->audiostate.mute_state = 0; + av7110->audiostate.play_state = AUDIO_STOPPED; + av7110->audiostate.stream_source = AUDIO_SOURCE_DEMUX; + av7110->audiostate.channel_select = AUDIO_STEREO; + av7110->audiostate.bypass_mode = 0; + + av7110->videostate.video_blank = 0; + av7110->videostate.play_state = VIDEO_STOPPED; + av7110->videostate.stream_source = VIDEO_SOURCE_DEMUX; + av7110->videostate.video_format = VIDEO_FORMAT_4_3; + av7110->videostate.display_format = VIDEO_LETTER_BOX; + av7110->display_ar = VIDEO_FORMAT_4_3; + av7110->display_panscan = VID_VC_AND_PS_PREF; + + init_waitqueue_head(&av7110->video_events.wait_queue); + spin_lock_init(&av7110->video_events.lock); + av7110->video_events.eventw = av7110->video_events.eventr = 0; + av7110->video_events.overflow = 0; + memset(&av7110->video_size, 0, sizeof (video_size_t)); + + dvb_register_device(&av7110->dvb_adapter, &av7110->video_dev, + &dvbdev_video, av7110, DVB_DEVICE_VIDEO); + + dvb_register_device(&av7110->dvb_adapter, &av7110->audio_dev, + &dvbdev_audio, av7110, DVB_DEVICE_AUDIO); + + return 0; +} + +void av7110_av_unregister(struct av7110 *av7110) +{ + dvb_unregister_device(av7110->audio_dev); + dvb_unregister_device(av7110->video_dev); +} + +int av7110_av_init(struct av7110 *av7110) +{ + void (*play[])(u8 *, int, void *) = { play_audio_cb, play_video_cb }; + int i, ret; + + for (i = 0; i < 2; i++) { + struct ipack *ipack = av7110->ipack + i; + + ret = av7110_ipack_init(ipack, IPACKS, play[i]); + if (ret < 0) { + if (i) + av7110_ipack_free(--ipack); + goto out; + } + ipack->data = av7110; + } + + dvb_ringbuffer_init(&av7110->avout, av7110->iobuf, AVOUTLEN); + dvb_ringbuffer_init(&av7110->aout, av7110->iobuf + AVOUTLEN, AOUTLEN); + + av7110->kbuf[0] = (u8 *)(av7110->iobuf + AVOUTLEN + AOUTLEN + BMPLEN); + av7110->kbuf[1] = av7110->kbuf[0] + 2 * IPACKS; +out: + return ret; +} + +void av7110_av_exit(struct av7110 *av7110) +{ + av7110_ipack_free(&av7110->ipack[0]); + av7110_ipack_free(&av7110->ipack[1]); +} diff --git a/drivers/media/pci/ttpci/av7110_av.h b/drivers/media/pci/ttpci/av7110_av.h new file mode 100644 index 00000000..5f02ef85 --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_av.h @@ -0,0 +1,30 @@ +#ifndef _AV7110_AV_H_ +#define _AV7110_AV_H_ + +struct av7110; + +extern int av7110_set_vidmode(struct av7110 *av7110, + enum av7110_video_mode mode); + +extern int av7110_record_cb(struct dvb_filter_pes2ts *p2t, u8 *buf, size_t len); +extern int av7110_pes_play(void *dest, struct dvb_ringbuffer *buf, int dlen); +extern int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t len); + +extern int av7110_set_volume(struct av7110 *av7110, int volleft, int volright); +extern int av7110_av_stop(struct av7110 *av7110, int av); +extern int av7110_av_start_record(struct av7110 *av7110, int av, + struct dvb_demux_feed *dvbdmxfeed); +extern int av7110_av_start_play(struct av7110 *av7110, int av); + +extern void dvb_video_add_event(struct av7110 *av7110, struct video_event *event); + +extern void av7110_p2t_init(struct av7110_p2t *p, struct dvb_demux_feed *feed); +extern void av7110_p2t_write(u8 const *buf, long int length, u16 pid, struct av7110_p2t *p); + +extern int av7110_av_register(struct av7110 *av7110); +extern void av7110_av_unregister(struct av7110 *av7110); +extern int av7110_av_init(struct av7110 *av7110); +extern void av7110_av_exit(struct av7110 *av7110); + + +#endif /* _AV7110_AV_H_ */ diff --git a/drivers/media/pci/ttpci/av7110_ca.c b/drivers/media/pci/ttpci/av7110_ca.c new file mode 100644 index 00000000..a6079b90 --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_ca.c @@ -0,0 +1,397 @@ +/* + * av7110_ca.c: CA and CI stuff + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * originally based on code by: + * Copyright (C) 1998,1999 Christian Theiss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "av7110.h" +#include "av7110_hw.h" +#include "av7110_ca.h" + + +void CI_handle(struct av7110 *av7110, u8 *data, u16 len) +{ + dprintk(8, "av7110:%p\n",av7110); + + if (len < 3) + return; + switch (data[0]) { + case CI_MSG_CI_INFO: + if (data[2] != 1 && data[2] != 2) + break; + switch (data[1]) { + case 0: + av7110->ci_slot[data[2] - 1].flags = 0; + break; + case 1: + av7110->ci_slot[data[2] - 1].flags |= CA_CI_MODULE_PRESENT; + break; + case 2: + av7110->ci_slot[data[2] - 1].flags |= CA_CI_MODULE_READY; + break; + } + break; + case CI_SWITCH_PRG_REPLY: + //av7110->ci_stat=data[1]; + break; + default: + break; + } +} + + +void ci_get_data(struct dvb_ringbuffer *cibuf, u8 *data, int len) +{ + if (dvb_ringbuffer_free(cibuf) < len + 2) + return; + + DVB_RINGBUFFER_WRITE_BYTE(cibuf, len >> 8); + DVB_RINGBUFFER_WRITE_BYTE(cibuf, len & 0xff); + dvb_ringbuffer_write(cibuf, data, len); + wake_up_interruptible(&cibuf->queue); +} + + +/****************************************************************************** + * CI link layer file ops + ******************************************************************************/ + +static int ci_ll_init(struct dvb_ringbuffer *cirbuf, struct dvb_ringbuffer *ciwbuf, int size) +{ + struct dvb_ringbuffer *tab[] = { cirbuf, ciwbuf, NULL }, **p; + void *data; + + for (p = tab; *p; p++) { + data = vmalloc(size); + if (!data) { + while (p-- != tab) { + vfree(p[0]->data); + p[0]->data = NULL; + } + return -ENOMEM; + } + dvb_ringbuffer_init(*p, data, size); + } + return 0; +} + +static void ci_ll_flush(struct dvb_ringbuffer *cirbuf, struct dvb_ringbuffer *ciwbuf) +{ + dvb_ringbuffer_flush_spinlock_wakeup(cirbuf); + dvb_ringbuffer_flush_spinlock_wakeup(ciwbuf); +} + +static void ci_ll_release(struct dvb_ringbuffer *cirbuf, struct dvb_ringbuffer *ciwbuf) +{ + vfree(cirbuf->data); + cirbuf->data = NULL; + vfree(ciwbuf->data); + ciwbuf->data = NULL; +} + +static int ci_ll_reset(struct dvb_ringbuffer *cibuf, struct file *file, + int slots, ca_slot_info_t *slot) +{ + int i; + int len = 0; + u8 msg[8] = { 0x00, 0x06, 0x00, 0x00, 0xff, 0x02, 0x00, 0x00 }; + + for (i = 0; i < 2; i++) { + if (slots & (1 << i)) + len += 8; + } + + if (dvb_ringbuffer_free(cibuf) < len) + return -EBUSY; + + for (i = 0; i < 2; i++) { + if (slots & (1 << i)) { + msg[2] = i; + dvb_ringbuffer_write(cibuf, msg, 8); + slot[i].flags = 0; + } + } + + return 0; +} + +static ssize_t ci_ll_write(struct dvb_ringbuffer *cibuf, struct file *file, + const char __user *buf, size_t count, loff_t *ppos) +{ + int free; + int non_blocking = file->f_flags & O_NONBLOCK; + u8 *page = (u8 *)__get_free_page(GFP_USER); + int res; + + if (!page) + return -ENOMEM; + + res = -EINVAL; + if (count > 2048) + goto out; + + res = -EFAULT; + if (copy_from_user(page, buf, count)) + goto out; + + free = dvb_ringbuffer_free(cibuf); + if (count + 2 > free) { + res = -EWOULDBLOCK; + if (non_blocking) + goto out; + res = -ERESTARTSYS; + if (wait_event_interruptible(cibuf->queue, + (dvb_ringbuffer_free(cibuf) >= count + 2))) + goto out; + } + + DVB_RINGBUFFER_WRITE_BYTE(cibuf, count >> 8); + DVB_RINGBUFFER_WRITE_BYTE(cibuf, count & 0xff); + + res = dvb_ringbuffer_write(cibuf, page, count); +out: + free_page((unsigned long)page); + return res; +} + +static ssize_t ci_ll_read(struct dvb_ringbuffer *cibuf, struct file *file, + char __user *buf, size_t count, loff_t *ppos) +{ + int avail; + int non_blocking = file->f_flags & O_NONBLOCK; + ssize_t len; + + if (!cibuf->data || !count) + return 0; + if (non_blocking && (dvb_ringbuffer_empty(cibuf))) + return -EWOULDBLOCK; + if (wait_event_interruptible(cibuf->queue, + !dvb_ringbuffer_empty(cibuf))) + return -ERESTARTSYS; + avail = dvb_ringbuffer_avail(cibuf); + if (avail < 4) + return 0; + len = DVB_RINGBUFFER_PEEK(cibuf, 0) << 8; + len |= DVB_RINGBUFFER_PEEK(cibuf, 1); + if (avail < len + 2 || count < len) + return -EINVAL; + DVB_RINGBUFFER_SKIP(cibuf, 2); + + return dvb_ringbuffer_read_user(cibuf, buf, len); +} + +static int dvb_ca_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + int err = dvb_generic_open(inode, file); + + dprintk(8, "av7110:%p\n",av7110); + + if (err < 0) + return err; + ci_ll_flush(&av7110->ci_rbuffer, &av7110->ci_wbuffer); + return 0; +} + +static unsigned int dvb_ca_poll (struct file *file, poll_table *wait) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + struct dvb_ringbuffer *rbuf = &av7110->ci_rbuffer; + struct dvb_ringbuffer *wbuf = &av7110->ci_wbuffer; + unsigned int mask = 0; + + dprintk(8, "av7110:%p\n",av7110); + + poll_wait(file, &rbuf->queue, wait); + poll_wait(file, &wbuf->queue, wait); + + if (!dvb_ringbuffer_empty(rbuf)) + mask |= (POLLIN | POLLRDNORM); + + if (dvb_ringbuffer_free(wbuf) > 1024) + mask |= (POLLOUT | POLLWRNORM); + + return mask; +} + +static int dvb_ca_ioctl(struct file *file, unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + unsigned long arg = (unsigned long) parg; + int ret = 0; + + dprintk(8, "av7110:%p\n",av7110); + + if (mutex_lock_interruptible(&av7110->ioctl_mutex)) + return -ERESTARTSYS; + + switch (cmd) { + case CA_RESET: + ret = ci_ll_reset(&av7110->ci_wbuffer, file, arg, + &av7110->ci_slot[0]); + break; + case CA_GET_CAP: + { + ca_caps_t cap; + + cap.slot_num = 2; + cap.slot_type = (FW_CI_LL_SUPPORT(av7110->arm_app) ? + CA_CI_LINK : CA_CI) | CA_DESCR; + cap.descr_num = 16; + cap.descr_type = CA_ECD; + memcpy(parg, &cap, sizeof(cap)); + break; + } + + case CA_GET_SLOT_INFO: + { + ca_slot_info_t *info=(ca_slot_info_t *)parg; + + if (info->num < 0 || info->num > 1) { + mutex_unlock(&av7110->ioctl_mutex); + return -EINVAL; + } + av7110->ci_slot[info->num].num = info->num; + av7110->ci_slot[info->num].type = FW_CI_LL_SUPPORT(av7110->arm_app) ? + CA_CI_LINK : CA_CI; + memcpy(info, &av7110->ci_slot[info->num], sizeof(ca_slot_info_t)); + break; + } + + case CA_GET_MSG: + break; + + case CA_SEND_MSG: + break; + + case CA_GET_DESCR_INFO: + { + ca_descr_info_t info; + + info.num = 16; + info.type = CA_ECD; + memcpy(parg, &info, sizeof (info)); + break; + } + + case CA_SET_DESCR: + { + ca_descr_t *descr = (ca_descr_t*) parg; + + if (descr->index >= 16 || descr->parity > 1) { + mutex_unlock(&av7110->ioctl_mutex); + return -EINVAL; + } + av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetDescr, 5, + (descr->index<<8)|descr->parity, + (descr->cw[0]<<8)|descr->cw[1], + (descr->cw[2]<<8)|descr->cw[3], + (descr->cw[4]<<8)|descr->cw[5], + (descr->cw[6]<<8)|descr->cw[7]); + break; + } + + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&av7110->ioctl_mutex); + return ret; +} + +static ssize_t dvb_ca_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + + dprintk(8, "av7110:%p\n",av7110); + return ci_ll_write(&av7110->ci_wbuffer, file, buf, count, ppos); +} + +static ssize_t dvb_ca_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct av7110 *av7110 = dvbdev->priv; + + dprintk(8, "av7110:%p\n",av7110); + return ci_ll_read(&av7110->ci_rbuffer, file, buf, count, ppos); +} + +static const struct file_operations dvb_ca_fops = { + .owner = THIS_MODULE, + .read = dvb_ca_read, + .write = dvb_ca_write, + .unlocked_ioctl = dvb_generic_ioctl, + .open = dvb_ca_open, + .release = dvb_generic_release, + .poll = dvb_ca_poll, + .llseek = default_llseek, +}; + +static struct dvb_device dvbdev_ca = { + .priv = NULL, + .users = 1, + .writers = 1, + .fops = &dvb_ca_fops, + .kernel_ioctl = dvb_ca_ioctl, +}; + + +int av7110_ca_register(struct av7110 *av7110) +{ + return dvb_register_device(&av7110->dvb_adapter, &av7110->ca_dev, + &dvbdev_ca, av7110, DVB_DEVICE_CA); +} + +void av7110_ca_unregister(struct av7110 *av7110) +{ + dvb_unregister_device(av7110->ca_dev); +} + +int av7110_ca_init(struct av7110* av7110) +{ + return ci_ll_init(&av7110->ci_rbuffer, &av7110->ci_wbuffer, 8192); +} + +void av7110_ca_exit(struct av7110* av7110) +{ + ci_ll_release(&av7110->ci_rbuffer, &av7110->ci_wbuffer); +} diff --git a/drivers/media/pci/ttpci/av7110_ca.h b/drivers/media/pci/ttpci/av7110_ca.h new file mode 100644 index 00000000..70ee855e --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_ca.h @@ -0,0 +1,14 @@ +#ifndef _AV7110_CA_H_ +#define _AV7110_CA_H_ + +struct av7110; + +extern void CI_handle(struct av7110 *av7110, u8 *data, u16 len); +extern void ci_get_data(struct dvb_ringbuffer *cibuf, u8 *data, int len); + +extern int av7110_ca_register(struct av7110 *av7110); +extern void av7110_ca_unregister(struct av7110 *av7110); +extern int av7110_ca_init(struct av7110* av7110); +extern void av7110_ca_exit(struct av7110* av7110); + +#endif /* _AV7110_CA_H_ */ diff --git a/drivers/media/pci/ttpci/av7110_hw.c b/drivers/media/pci/ttpci/av7110_hw.c new file mode 100644 index 00000000..6299d5da --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_hw.c @@ -0,0 +1,1223 @@ +/* + * av7110_hw.c: av7110 low level hardware access and firmware interface + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * originally based on code by: + * Copyright (C) 1998,1999 Christian Theiss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * the project's page is at http://www.linuxtv.org/ + */ + +/* for debugging ARM communication: */ +//#define COM_DEBUG + +#include +#include +#include +#include +#include +#include + +#include "av7110.h" +#include "av7110_hw.h" + +#define _NOHANDSHAKE + +/* + * Max transfer size done by av7110_fw_cmd() + * + * The maximum size passed to this function is 6 bytes. The buffer also + * uses two additional ones for type and size. So, 8 bytes is enough. + */ +#define MAX_XFER_SIZE 8 + +/**************************************************************************** + * DEBI functions + ****************************************************************************/ + +/* This DEBI code is based on the Stradis driver + by Nathan Laredo */ + +int av7110_debiwrite(struct av7110 *av7110, u32 config, + int addr, u32 val, int count) +{ + struct saa7146_dev *dev = av7110->dev; + + if (count <= 0 || count > 32764) { + printk("%s: invalid count %d\n", __func__, count); + return -1; + } + if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) { + printk("%s: wait_for_debi_done failed\n", __func__); + return -1; + } + saa7146_write(dev, DEBI_CONFIG, config); + if (count <= 4) /* immediate transfer */ + saa7146_write(dev, DEBI_AD, val); + else /* block transfer */ + saa7146_write(dev, DEBI_AD, av7110->debi_bus); + saa7146_write(dev, DEBI_COMMAND, (count << 17) | (addr & 0xffff)); + saa7146_write(dev, MC2, (2 << 16) | 2); + return 0; +} + +u32 av7110_debiread(struct av7110 *av7110, u32 config, int addr, int count) +{ + struct saa7146_dev *dev = av7110->dev; + u32 result = 0; + + if (count > 32764 || count <= 0) { + printk("%s: invalid count %d\n", __func__, count); + return 0; + } + if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) { + printk("%s: wait_for_debi_done #1 failed\n", __func__); + return 0; + } + saa7146_write(dev, DEBI_AD, av7110->debi_bus); + saa7146_write(dev, DEBI_COMMAND, (count << 17) | 0x10000 | (addr & 0xffff)); + + saa7146_write(dev, DEBI_CONFIG, config); + saa7146_write(dev, MC2, (2 << 16) | 2); + if (count > 4) + return count; + if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) { + printk("%s: wait_for_debi_done #2 failed\n", __func__); + return 0; + } + + result = saa7146_read(dev, DEBI_AD); + result &= (0xffffffffUL >> ((4 - count) * 8)); + return result; +} + + + +/* av7110 ARM core boot stuff */ +#if 0 +void av7110_reset_arm(struct av7110 *av7110) +{ + saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTLO); + + /* Disable DEBI and GPIO irq */ + SAA7146_IER_DISABLE(av7110->dev, MASK_19 | MASK_03); + SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03); + + saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTHI); + msleep(30); /* the firmware needs some time to initialize */ + + ARM_ResetMailBox(av7110); + + SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03); + SAA7146_IER_ENABLE(av7110->dev, MASK_03); + + av7110->arm_ready = 1; + dprintk(1, "reset ARM\n"); +} +#endif /* 0 */ + +static int waitdebi(struct av7110 *av7110, int adr, int state) +{ + int k; + + dprintk(4, "%p\n", av7110); + + for (k = 0; k < 100; k++) { + if (irdebi(av7110, DEBINOSWAP, adr, 0, 2) == state) + return 0; + udelay(5); + } + return -ETIMEDOUT; +} + +static int load_dram(struct av7110 *av7110, u32 *data, int len) +{ + int i; + int blocks, rest; + u32 base, bootblock = AV7110_BOOT_BLOCK; + + dprintk(4, "%p\n", av7110); + + blocks = len / AV7110_BOOT_MAX_SIZE; + rest = len % AV7110_BOOT_MAX_SIZE; + base = DRAM_START_CODE; + + for (i = 0; i < blocks; i++) { + if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) { + printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at block %d\n", i); + return -ETIMEDOUT; + } + dprintk(4, "writing DRAM block %d\n", i); + mwdebi(av7110, DEBISWAB, bootblock, + ((u8 *)data) + i * AV7110_BOOT_MAX_SIZE, AV7110_BOOT_MAX_SIZE); + bootblock ^= 0x1400; + iwdebi(av7110, DEBISWAB, AV7110_BOOT_BASE, swab32(base), 4); + iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, AV7110_BOOT_MAX_SIZE, 2); + iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2); + base += AV7110_BOOT_MAX_SIZE; + } + + if (rest > 0) { + if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) { + printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at last block\n"); + return -ETIMEDOUT; + } + if (rest > 4) + mwdebi(av7110, DEBISWAB, bootblock, + ((u8 *)data) + i * AV7110_BOOT_MAX_SIZE, rest); + else + mwdebi(av7110, DEBISWAB, bootblock, + ((u8 *)data) + i * AV7110_BOOT_MAX_SIZE - 4, rest + 4); + + iwdebi(av7110, DEBISWAB, AV7110_BOOT_BASE, swab32(base), 4); + iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, rest, 2); + iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2); + } + if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) { + printk(KERN_ERR "dvb-ttpci: load_dram(): timeout after last block\n"); + return -ETIMEDOUT; + } + iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, 0, 2); + iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2); + if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_AV7110_BOOT_COMPLETE) < 0) { + printk(KERN_ERR "dvb-ttpci: load_dram(): final handshake timeout\n"); + return -ETIMEDOUT; + } + return 0; +} + + +/* we cannot write av7110 DRAM directly, so load a bootloader into + * the DPRAM which implements a simple boot protocol */ +int av7110_bootarm(struct av7110 *av7110) +{ + const struct firmware *fw; + const char *fw_name = "av7110/bootcode.bin"; + struct saa7146_dev *dev = av7110->dev; + u32 ret; + int i; + + dprintk(4, "%p\n", av7110); + + av7110->arm_ready = 0; + + saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTLO); + + /* Disable DEBI and GPIO irq */ + SAA7146_IER_DISABLE(av7110->dev, MASK_03 | MASK_19); + SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03); + + /* enable DEBI */ + saa7146_write(av7110->dev, MC1, 0x08800880); + saa7146_write(av7110->dev, DD1_STREAM_B, 0x00000000); + saa7146_write(av7110->dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + /* test DEBI */ + iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4); + /* FIXME: Why does Nexus CA require 2x iwdebi for first init? */ + iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4); + + if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) { + printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: " + "%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n", + ret, 0x10325476); + return -1; + } + for (i = 0; i < 8192; i += 4) + iwdebi(av7110, DEBISWAP, DPRAM_BASE + i, 0x00, 4); + dprintk(2, "debi test OK\n"); + + /* boot */ + dprintk(1, "load boot code\n"); + saa7146_setgpio(dev, ARM_IRQ_LINE, SAA7146_GPIO_IRQLO); + //saa7146_setgpio(dev, DEBI_DONE_LINE, SAA7146_GPIO_INPUT); + //saa7146_setgpio(dev, 3, SAA7146_GPIO_INPUT); + + ret = request_firmware(&fw, fw_name, &dev->pci->dev); + if (ret) { + printk(KERN_ERR "dvb-ttpci: Failed to load firmware \"%s\"\n", + fw_name); + return ret; + } + + mwdebi(av7110, DEBISWAB, DPRAM_BASE, fw->data, fw->size); + release_firmware(fw); + iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2); + + if (saa7146_wait_for_debi_done(av7110->dev, 1)) { + printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): " + "saa7146_wait_for_debi_done() timed out\n"); + return -ETIMEDOUT; + } + saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI); + mdelay(1); + + dprintk(1, "load dram code\n"); + if (load_dram(av7110, (u32 *)av7110->bin_root, av7110->size_root) < 0) { + printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): " + "load_dram() failed\n"); + return -1; + } + + saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTLO); + mdelay(1); + + dprintk(1, "load dpram code\n"); + mwdebi(av7110, DEBISWAB, DPRAM_BASE, av7110->bin_dpram, av7110->size_dpram); + + if (saa7146_wait_for_debi_done(av7110->dev, 1)) { + printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): " + "saa7146_wait_for_debi_done() timed out after loading DRAM\n"); + return -ETIMEDOUT; + } + saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI); + msleep(30); /* the firmware needs some time to initialize */ + + //ARM_ClearIrq(av7110); + ARM_ResetMailBox(av7110); + SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03); + SAA7146_IER_ENABLE(av7110->dev, MASK_03); + + av7110->arm_errors = 0; + av7110->arm_ready = 1; + return 0; +} +MODULE_FIRMWARE("av7110/bootcode.bin"); + +/**************************************************************************** + * DEBI command polling + ****************************************************************************/ + +int av7110_wait_msgstate(struct av7110 *av7110, u16 flags) +{ + unsigned long start; + u32 stat; + int err; + + if (FW_VERSION(av7110->arm_app) <= 0x261c) { + /* not supported by old firmware */ + msleep(50); + return 0; + } + + /* new firmware */ + start = jiffies; + for (;;) { + err = time_after(jiffies, start + ARM_WAIT_FREE); + if (mutex_lock_interruptible(&av7110->dcomlock)) + return -ERESTARTSYS; + stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); + mutex_unlock(&av7110->dcomlock); + if ((stat & flags) == 0) + break; + if (err) { + printk(KERN_ERR "%s: timeout waiting for MSGSTATE %04x\n", + __func__, stat & flags); + return -ETIMEDOUT; + } + msleep(1); + } + return 0; +} + +static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) +{ + int i; + unsigned long start; + char *type = NULL; + u16 flags[2] = {0, 0}; + u32 stat; + int err; + +// dprintk(4, "%p\n", av7110); + + if (!av7110->arm_ready) { + dprintk(1, "arm not ready.\n"); + return -ENXIO; + } + + start = jiffies; + while (1) { + err = time_after(jiffies, start + ARM_WAIT_FREE); + if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0) + break; + if (err) { + printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND idle\n", __func__); + av7110->arm_errors++; + return -ETIMEDOUT; + } + msleep(1); + } + + if (FW_VERSION(av7110->arm_app) <= 0x261f) + wdebi(av7110, DEBINOSWAP, COM_IF_LOCK, 0xffff, 2); + +#ifndef _NOHANDSHAKE + start = jiffies; + while (1) { + err = time_after(jiffies, start + ARM_WAIT_SHAKE); + if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0) + break; + if (err) { + printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for HANDSHAKE_REG\n", __func__); + return -ETIMEDOUT; + } + msleep(1); + } +#endif + + switch ((buf[0] >> 8) & 0xff) { + case COMTYPE_PIDFILTER: + case COMTYPE_ENCODER: + case COMTYPE_REC_PLAY: + case COMTYPE_MPEGDECODER: + type = "MSG"; + flags[0] = GPMQOver; + flags[1] = GPMQFull; + break; + case COMTYPE_OSD: + type = "OSD"; + flags[0] = OSDQOver; + flags[1] = OSDQFull; + break; + case COMTYPE_MISC: + if (FW_VERSION(av7110->arm_app) >= 0x261d) { + type = "MSG"; + flags[0] = GPMQOver; + flags[1] = GPMQBusy; + } + break; + default: + break; + } + + if (type != NULL) { + /* non-immediate COMMAND type */ + start = jiffies; + for (;;) { + err = time_after(jiffies, start + ARM_WAIT_FREE); + stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); + if (stat & flags[0]) { + printk(KERN_ERR "%s: %s QUEUE overflow\n", + __func__, type); + return -1; + } + if ((stat & flags[1]) == 0) + break; + if (err) { + printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n", + __func__, type); + av7110->arm_errors++; + return -ETIMEDOUT; + } + msleep(1); + } + } + + for (i = 2; i < length; i++) + wdebi(av7110, DEBINOSWAP, COMMAND + 2 * i, (u32) buf[i], 2); + + if (length) + wdebi(av7110, DEBINOSWAP, COMMAND + 2, (u32) buf[1], 2); + else + wdebi(av7110, DEBINOSWAP, COMMAND + 2, 0, 2); + + wdebi(av7110, DEBINOSWAP, COMMAND, (u32) buf[0], 2); + + if (FW_VERSION(av7110->arm_app) <= 0x261f) + wdebi(av7110, DEBINOSWAP, COM_IF_LOCK, 0x0000, 2); + +#ifdef COM_DEBUG + start = jiffies; + while (1) { + err = time_after(jiffies, start + ARM_WAIT_FREE); + if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0) + break; + if (err) { + printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND %d to complete\n", + __func__, (buf[0] >> 8) & 0xff); + return -ETIMEDOUT; + } + msleep(1); + } + + stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); + if (stat & GPMQOver) { + printk(KERN_ERR "dvb-ttpci: %s(): GPMQOver\n", __func__); + return -ENOSPC; + } + else if (stat & OSDQOver) { + printk(KERN_ERR "dvb-ttpci: %s(): OSDQOver\n", __func__); + return -ENOSPC; + } +#endif + + return 0; +} + +static int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) +{ + int ret; + +// dprintk(4, "%p\n", av7110); + + if (!av7110->arm_ready) { + dprintk(1, "arm not ready.\n"); + return -1; + } + if (mutex_lock_interruptible(&av7110->dcomlock)) + return -ERESTARTSYS; + + ret = __av7110_send_fw_cmd(av7110, buf, length); + mutex_unlock(&av7110->dcomlock); + if (ret && ret!=-ERESTARTSYS) + printk(KERN_ERR "dvb-ttpci: %s(): av7110_send_fw_cmd error %d\n", + __func__, ret); + return ret; +} + +int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...) +{ + va_list args; + u16 buf[MAX_XFER_SIZE]; + int i, ret; + +// dprintk(4, "%p\n", av7110); + + if (2 + num > sizeof(buf)) { + printk(KERN_WARNING + "%s: %s len=%d is too big!\n", + KBUILD_MODNAME, __func__, num); + return -EINVAL; + } + + buf[0] = ((type << 8) | com); + buf[1] = num; + + if (num) { + va_start(args, num); + for (i = 0; i < num; i++) + buf[i + 2] = va_arg(args, u32); + va_end(args); + } + + ret = av7110_send_fw_cmd(av7110, buf, num + 2); + if (ret && ret != -ERESTARTSYS) + printk(KERN_ERR "dvb-ttpci: av7110_fw_cmd error %d\n", ret); + return ret; +} + +#if 0 +int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len) +{ + int i, ret; + u16 cmd[18] = { ((COMTYPE_COMMON_IF << 8) + subcom), + 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + + dprintk(4, "%p\n", av7110); + + for(i = 0; i < len && i < 32; i++) + { + if(i % 2 == 0) + cmd[(i / 2) + 2] = (u16)(buf[i]) << 8; + else + cmd[(i / 2) + 2] |= buf[i]; + } + + ret = av7110_send_fw_cmd(av7110, cmd, 18); + if (ret && ret != -ERESTARTSYS) + printk(KERN_ERR "dvb-ttpci: av7110_send_ci_cmd error %d\n", ret); + return ret; +} +#endif /* 0 */ + +int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, + int request_buf_len, u16 *reply_buf, int reply_buf_len) +{ + int err; + s16 i; + unsigned long start; +#ifdef COM_DEBUG + u32 stat; +#endif + + dprintk(4, "%p\n", av7110); + + if (!av7110->arm_ready) { + dprintk(1, "arm not ready.\n"); + return -1; + } + + if (mutex_lock_interruptible(&av7110->dcomlock)) + return -ERESTARTSYS; + + if ((err = __av7110_send_fw_cmd(av7110, request_buf, request_buf_len)) < 0) { + mutex_unlock(&av7110->dcomlock); + printk(KERN_ERR "dvb-ttpci: av7110_fw_request error %d\n", err); + return err; + } + + start = jiffies; + while (1) { + err = time_after(jiffies, start + ARM_WAIT_FREE); + if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0) + break; + if (err) { + printk(KERN_ERR "%s: timeout waiting for COMMAND to complete\n", __func__); + mutex_unlock(&av7110->dcomlock); + return -ETIMEDOUT; + } +#ifdef _NOHANDSHAKE + msleep(1); +#endif + } + +#ifndef _NOHANDSHAKE + start = jiffies; + while (1) { + err = time_after(jiffies, start + ARM_WAIT_SHAKE); + if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0) + break; + if (err) { + printk(KERN_ERR "%s: timeout waiting for HANDSHAKE_REG\n", __func__); + mutex_unlock(&av7110->dcomlock); + return -ETIMEDOUT; + } + msleep(1); + } +#endif + +#ifdef COM_DEBUG + stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); + if (stat & GPMQOver) { + printk(KERN_ERR "%s: GPMQOver\n", __func__); + mutex_unlock(&av7110->dcomlock); + return -1; + } + else if (stat & OSDQOver) { + printk(KERN_ERR "%s: OSDQOver\n", __func__); + mutex_unlock(&av7110->dcomlock); + return -1; + } +#endif + + for (i = 0; i < reply_buf_len; i++) + reply_buf[i] = rdebi(av7110, DEBINOSWAP, COM_BUFF + 2 * i, 0, 2); + + mutex_unlock(&av7110->dcomlock); + return 0; +} + +static int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* buf, s16 length) +{ + int ret; + ret = av7110_fw_request(av7110, &tag, 0, buf, length); + if (ret) + printk(KERN_ERR "dvb-ttpci: av7110_fw_query error %d\n", ret); + return ret; +} + + +/**************************************************************************** + * Firmware commands + ****************************************************************************/ + +/* get version of the firmware ROM, RTSL, video ucode and ARM application */ +int av7110_firmversion(struct av7110 *av7110) +{ + u16 buf[20]; + u16 tag = ((COMTYPE_REQUEST << 8) + ReqVersion); + + dprintk(4, "%p\n", av7110); + + if (av7110_fw_query(av7110, tag, buf, 16)) { + printk("dvb-ttpci: failed to boot firmware @ card %d\n", + av7110->dvb_adapter.num); + return -EIO; + } + + av7110->arm_fw = (buf[0] << 16) + buf[1]; + av7110->arm_rtsl = (buf[2] << 16) + buf[3]; + av7110->arm_vid = (buf[4] << 16) + buf[5]; + av7110->arm_app = (buf[6] << 16) + buf[7]; + av7110->avtype = (buf[8] << 16) + buf[9]; + + printk("dvb-ttpci: info @ card %d: firm %08x, rtsl %08x, vid %08x, app %08x\n", + av7110->dvb_adapter.num, av7110->arm_fw, + av7110->arm_rtsl, av7110->arm_vid, av7110->arm_app); + + /* print firmware capabilities */ + if (FW_CI_LL_SUPPORT(av7110->arm_app)) + printk("dvb-ttpci: firmware @ card %d supports CI link layer interface\n", + av7110->dvb_adapter.num); + else + printk("dvb-ttpci: no firmware support for CI link layer interface @ card %d\n", + av7110->dvb_adapter.num); + + return 0; +} + + +int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long burst) +{ + int i, ret; + u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) + SendDiSEqC), + 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + + dprintk(4, "%p\n", av7110); + + if (len > 10) + len = 10; + + buf[1] = len + 2; + buf[2] = len; + + if (burst != -1) + buf[3] = burst ? 0x01 : 0x00; + else + buf[3] = 0xffff; + + for (i = 0; i < len; i++) + buf[i + 4] = msg[i]; + + ret = av7110_send_fw_cmd(av7110, buf, 18); + if (ret && ret!=-ERESTARTSYS) + printk(KERN_ERR "dvb-ttpci: av7110_diseqc_send error %d\n", ret); + return ret; +} + + +#ifdef CONFIG_DVB_AV7110_OSD + +static inline int SetColorBlend(struct av7110 *av7110, u8 windownr) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, SetCBlend, 1, windownr); +} + +static inline int SetBlend_(struct av7110 *av7110, u8 windownr, + enum av7110_osd_palette_type colordepth, u16 index, u8 blending) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, SetBlend, 4, + windownr, colordepth, index, blending); +} + +static inline int SetColor_(struct av7110 *av7110, u8 windownr, + enum av7110_osd_palette_type colordepth, u16 index, u16 colorhi, u16 colorlo) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, SetColor, 5, + windownr, colordepth, index, colorhi, colorlo); +} + +static inline int SetFont(struct av7110 *av7110, u8 windownr, u8 fontsize, + u16 colorfg, u16 colorbg) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, Set_Font, 4, + windownr, fontsize, colorfg, colorbg); +} + +static int FlushText(struct av7110 *av7110) +{ + unsigned long start; + int err; + + if (mutex_lock_interruptible(&av7110->dcomlock)) + return -ERESTARTSYS; + start = jiffies; + while (1) { + err = time_after(jiffies, start + ARM_WAIT_OSD); + if (rdebi(av7110, DEBINOSWAP, BUFF1_BASE, 0, 2) == 0) + break; + if (err) { + printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for BUFF1_BASE == 0\n", + __func__); + mutex_unlock(&av7110->dcomlock); + return -ETIMEDOUT; + } + msleep(1); + } + mutex_unlock(&av7110->dcomlock); + return 0; +} + +static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, char *buf) +{ + int i, ret; + unsigned long start; + int length = strlen(buf) + 1; + u16 cbuf[5] = { (COMTYPE_OSD << 8) + DText, 3, win, x, y }; + + if (mutex_lock_interruptible(&av7110->dcomlock)) + return -ERESTARTSYS; + + start = jiffies; + while (1) { + ret = time_after(jiffies, start + ARM_WAIT_OSD); + if (rdebi(av7110, DEBINOSWAP, BUFF1_BASE, 0, 2) == 0) + break; + if (ret) { + printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for BUFF1_BASE == 0\n", + __func__); + mutex_unlock(&av7110->dcomlock); + return -ETIMEDOUT; + } + msleep(1); + } +#ifndef _NOHANDSHAKE + start = jiffies; + while (1) { + ret = time_after(jiffies, start + ARM_WAIT_SHAKE); + if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0) + break; + if (ret) { + printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for HANDSHAKE_REG\n", + __func__); + mutex_unlock(&av7110->dcomlock); + return -ETIMEDOUT; + } + msleep(1); + } +#endif + for (i = 0; i < length / 2; i++) + wdebi(av7110, DEBINOSWAP, BUFF1_BASE + i * 2, + swab16(*(u16 *)(buf + 2 * i)), 2); + if (length & 1) + wdebi(av7110, DEBINOSWAP, BUFF1_BASE + i * 2, 0, 2); + ret = __av7110_send_fw_cmd(av7110, cbuf, 5); + mutex_unlock(&av7110->dcomlock); + if (ret && ret!=-ERESTARTSYS) + printk(KERN_ERR "dvb-ttpci: WriteText error %d\n", ret); + return ret; +} + +static inline int DrawLine(struct av7110 *av7110, u8 windownr, + u16 x, u16 y, u16 dx, u16 dy, u16 color) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, DLine, 6, + windownr, x, y, dx, dy, color); +} + +static inline int DrawBlock(struct av7110 *av7110, u8 windownr, + u16 x, u16 y, u16 dx, u16 dy, u16 color) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, DBox, 6, + windownr, x, y, dx, dy, color); +} + +static inline int HideWindow(struct av7110 *av7110, u8 windownr) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, WHide, 1, windownr); +} + +static inline int MoveWindowRel(struct av7110 *av7110, u8 windownr, u16 x, u16 y) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, WMoveD, 3, windownr, x, y); +} + +static inline int MoveWindowAbs(struct av7110 *av7110, u8 windownr, u16 x, u16 y) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, WMoveA, 3, windownr, x, y); +} + +static inline int DestroyOSDWindow(struct av7110 *av7110, u8 windownr) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, WDestroy, 1, windownr); +} + +static inline int CreateOSDWindow(struct av7110 *av7110, u8 windownr, + osd_raw_window_t disptype, + u16 width, u16 height) +{ + return av7110_fw_cmd(av7110, COMTYPE_OSD, WCreate, 4, + windownr, disptype, width, height); +} + + +static enum av7110_osd_palette_type bpp2pal[8] = { + Pal1Bit, Pal2Bit, 0, Pal4Bit, 0, 0, 0, Pal8Bit +}; +static osd_raw_window_t bpp2bit[8] = { + OSD_BITMAP1, OSD_BITMAP2, 0, OSD_BITMAP4, 0, 0, 0, OSD_BITMAP8 +}; + +static inline int WaitUntilBmpLoaded(struct av7110 *av7110) +{ + int ret = wait_event_timeout(av7110->bmpq, + av7110->bmp_state != BMP_LOADING, 10*HZ); + if (ret == 0) { + printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n", + ret, av7110->bmp_state); + av7110->bmp_state = BMP_NONE; + return -ETIMEDOUT; + } + return 0; +} + +static inline int LoadBitmap(struct av7110 *av7110, + u16 dx, u16 dy, int inc, u8 __user * data) +{ + u16 format; + int bpp; + int i; + int d, delta; + u8 c; + int ret; + + dprintk(4, "%p\n", av7110); + + format = bpp2bit[av7110->osdbpp[av7110->osdwin]]; + + av7110->bmp_state = BMP_LOADING; + if (format == OSD_BITMAP8) { + bpp=8; delta = 1; + } else if (format == OSD_BITMAP4) { + bpp=4; delta = 2; + } else if (format == OSD_BITMAP2) { + bpp=2; delta = 4; + } else if (format == OSD_BITMAP1) { + bpp=1; delta = 8; + } else { + av7110->bmp_state = BMP_NONE; + return -EINVAL; + } + av7110->bmplen = ((dx * dy * bpp + 7) & ~7) / 8; + av7110->bmpp = 0; + if (av7110->bmplen > 32768) { + av7110->bmp_state = BMP_NONE; + return -EINVAL; + } + for (i = 0; i < dy; i++) { + if (copy_from_user(av7110->bmpbuf + 1024 + i * dx, data + i * inc, dx)) { + av7110->bmp_state = BMP_NONE; + return -EINVAL; + } + } + if (format != OSD_BITMAP8) { + for (i = 0; i < dx * dy / delta; i++) { + c = ((u8 *)av7110->bmpbuf)[1024 + i * delta + delta - 1]; + for (d = delta - 2; d >= 0; d--) { + c |= (((u8 *)av7110->bmpbuf)[1024 + i * delta + d] + << ((delta - d - 1) * bpp)); + ((u8 *)av7110->bmpbuf)[1024 + i] = c; + } + } + } + av7110->bmplen += 1024; + dprintk(4, "av7110_fw_cmd: LoadBmp size %d\n", av7110->bmplen); + ret = av7110_fw_cmd(av7110, COMTYPE_OSD, LoadBmp, 3, format, dx, dy); + if (!ret) + ret = WaitUntilBmpLoaded(av7110); + return ret; +} + +static int BlitBitmap(struct av7110 *av7110, u16 x, u16 y) +{ + dprintk(4, "%p\n", av7110); + + return av7110_fw_cmd(av7110, COMTYPE_OSD, BlitBmp, 4, av7110->osdwin, x, y, 0); +} + +static inline int ReleaseBitmap(struct av7110 *av7110) +{ + dprintk(4, "%p\n", av7110); + + if (av7110->bmp_state != BMP_LOADED && FW_VERSION(av7110->arm_app) < 0x261e) + return -1; + if (av7110->bmp_state == BMP_LOADING) + dprintk(1,"ReleaseBitmap called while BMP_LOADING\n"); + av7110->bmp_state = BMP_NONE; + return av7110_fw_cmd(av7110, COMTYPE_OSD, ReleaseBmp, 0); +} + +static u32 RGB2YUV(u16 R, u16 G, u16 B) +{ + u16 y, u, v; + u16 Y, Cr, Cb; + + y = R * 77 + G * 150 + B * 29; /* Luma=0.299R+0.587G+0.114B 0..65535 */ + u = 2048 + B * 8 -(y >> 5); /* Cr 0..4095 */ + v = 2048 + R * 8 -(y >> 5); /* Cb 0..4095 */ + + Y = y / 256; + Cb = u / 16; + Cr = v / 16; + + return Cr | (Cb << 16) | (Y << 8); +} + +static int OSDSetColor(struct av7110 *av7110, u8 color, u8 r, u8 g, u8 b, u8 blend) +{ + int ret; + + u16 ch, cl; + u32 yuv; + + yuv = blend ? RGB2YUV(r,g,b) : 0; + cl = (yuv & 0xffff); + ch = ((yuv >> 16) & 0xffff); + ret = SetColor_(av7110, av7110->osdwin, bpp2pal[av7110->osdbpp[av7110->osdwin]], + color, ch, cl); + if (!ret) + ret = SetBlend_(av7110, av7110->osdwin, bpp2pal[av7110->osdbpp[av7110->osdwin]], + color, ((blend >> 4) & 0x0f)); + return ret; +} + +static int OSDSetPalette(struct av7110 *av7110, u32 __user * colors, u8 first, u8 last) +{ + int i; + int length = last - first + 1; + + if (length * 4 > DATA_BUFF3_SIZE) + return -EINVAL; + + for (i = 0; i < length; i++) { + u32 color, blend, yuv; + + if (get_user(color, colors + i)) + return -EFAULT; + blend = (color & 0xF0000000) >> 4; + yuv = blend ? RGB2YUV(color & 0xFF, (color >> 8) & 0xFF, + (color >> 16) & 0xFF) | blend : 0; + yuv = ((yuv & 0xFFFF0000) >> 16) | ((yuv & 0x0000FFFF) << 16); + wdebi(av7110, DEBINOSWAP, DATA_BUFF3_BASE + i * 4, yuv, 4); + } + return av7110_fw_cmd(av7110, COMTYPE_OSD, Set_Palette, 4, + av7110->osdwin, + bpp2pal[av7110->osdbpp[av7110->osdwin]], + first, last); +} + +static int OSDSetBlock(struct av7110 *av7110, int x0, int y0, + int x1, int y1, int inc, u8 __user * data) +{ + uint w, h, bpp, bpl, size, lpb, bnum, brest; + int i; + int rc,release_rc; + + w = x1 - x0 + 1; + h = y1 - y0 + 1; + if (inc <= 0) + inc = w; + if (w <= 0 || w > 720 || h <= 0 || h > 576) + return -EINVAL; + bpp = av7110->osdbpp[av7110->osdwin] + 1; + bpl = ((w * bpp + 7) & ~7) / 8; + size = h * bpl; + lpb = (32 * 1024) / bpl; + bnum = size / (lpb * bpl); + brest = size - bnum * lpb * bpl; + + if (av7110->bmp_state == BMP_LOADING) { + /* possible if syscall is repeated by -ERESTARTSYS and if firmware cannot abort */ + BUG_ON (FW_VERSION(av7110->arm_app) >= 0x261e); + rc = WaitUntilBmpLoaded(av7110); + if (rc) + return rc; + /* just continue. This should work for all fw versions + * if bnum==1 && !brest && LoadBitmap was successful + */ + } + + rc = 0; + for (i = 0; i < bnum; i++) { + rc = LoadBitmap(av7110, w, lpb, inc, data); + if (rc) + break; + rc = BlitBitmap(av7110, x0, y0 + i * lpb); + if (rc) + break; + data += lpb * inc; + } + if (!rc && brest) { + rc = LoadBitmap(av7110, w, brest / bpl, inc, data); + if (!rc) + rc = BlitBitmap(av7110, x0, y0 + bnum * lpb); + } + release_rc = ReleaseBitmap(av7110); + if (!rc) + rc = release_rc; + if (rc) + dprintk(1,"returns %d\n",rc); + return rc; +} + +int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc) +{ + int ret; + + if (mutex_lock_interruptible(&av7110->osd_mutex)) + return -ERESTARTSYS; + + switch (dc->cmd) { + case OSD_Close: + ret = DestroyOSDWindow(av7110, av7110->osdwin); + break; + case OSD_Open: + av7110->osdbpp[av7110->osdwin] = (dc->color - 1) & 7; + ret = CreateOSDWindow(av7110, av7110->osdwin, + bpp2bit[av7110->osdbpp[av7110->osdwin]], + dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1); + if (ret) + break; + if (!dc->data) { + ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); + if (ret) + break; + ret = SetColorBlend(av7110, av7110->osdwin); + } + break; + case OSD_Show: + ret = MoveWindowRel(av7110, av7110->osdwin, 0, 0); + break; + case OSD_Hide: + ret = HideWindow(av7110, av7110->osdwin); + break; + case OSD_Clear: + ret = DrawBlock(av7110, av7110->osdwin, 0, 0, 720, 576, 0); + break; + case OSD_Fill: + ret = DrawBlock(av7110, av7110->osdwin, 0, 0, 720, 576, dc->color); + break; + case OSD_SetColor: + ret = OSDSetColor(av7110, dc->color, dc->x0, dc->y0, dc->x1, dc->y1); + break; + case OSD_SetPalette: + if (FW_VERSION(av7110->arm_app) >= 0x2618) + ret = OSDSetPalette(av7110, dc->data, dc->color, dc->x0); + else { + int i, len = dc->x0-dc->color+1; + u8 __user *colors = (u8 __user *)dc->data; + u8 r, g = 0, b = 0, blend = 0; + ret = 0; + for (i = 0; icolor + i, r, g, b, blend); + if (ret) + break; + } + } + break; + case OSD_SetPixel: + ret = DrawLine(av7110, av7110->osdwin, + dc->x0, dc->y0, 0, 0, dc->color); + break; + case OSD_SetRow: + dc->y1 = dc->y0; + /* fall through */ + case OSD_SetBlock: + ret = OSDSetBlock(av7110, dc->x0, dc->y0, dc->x1, dc->y1, dc->color, dc->data); + break; + case OSD_FillRow: + ret = DrawBlock(av7110, av7110->osdwin, dc->x0, dc->y0, + dc->x1-dc->x0+1, dc->y1, dc->color); + break; + case OSD_FillBlock: + ret = DrawBlock(av7110, av7110->osdwin, dc->x0, dc->y0, + dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1, dc->color); + break; + case OSD_Line: + ret = DrawLine(av7110, av7110->osdwin, + dc->x0, dc->y0, dc->x1 - dc->x0, dc->y1 - dc->y0, dc->color); + break; + case OSD_Text: + { + char textbuf[240]; + + if (strncpy_from_user(textbuf, dc->data, 240) < 0) { + ret = -EFAULT; + break; + } + textbuf[239] = 0; + if (dc->x1 > 3) + dc->x1 = 3; + ret = SetFont(av7110, av7110->osdwin, dc->x1, + (u16) (dc->color & 0xffff), (u16) (dc->color >> 16)); + if (!ret) + ret = FlushText(av7110); + if (!ret) + ret = WriteText(av7110, av7110->osdwin, dc->x0, dc->y0, textbuf); + break; + } + case OSD_SetWindow: + if (dc->x0 < 1 || dc->x0 > 7) + ret = -EINVAL; + else { + av7110->osdwin = dc->x0; + ret = 0; + } + break; + case OSD_MoveWindow: + ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); + if (!ret) + ret = SetColorBlend(av7110, av7110->osdwin); + break; + case OSD_OpenRaw: + if (dc->color < OSD_BITMAP1 || dc->color > OSD_CURSOR) { + ret = -EINVAL; + break; + } + if (dc->color >= OSD_BITMAP1 && dc->color <= OSD_BITMAP8HR) + av7110->osdbpp[av7110->osdwin] = (1 << (dc->color & 3)) - 1; + else + av7110->osdbpp[av7110->osdwin] = 0; + ret = CreateOSDWindow(av7110, av7110->osdwin, (osd_raw_window_t)dc->color, + dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1); + if (ret) + break; + if (!dc->data) { + ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); + if (!ret) + ret = SetColorBlend(av7110, av7110->osdwin); + } + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&av7110->osd_mutex); + if (ret==-ERESTARTSYS) + dprintk(1, "av7110_osd_cmd(%d) returns with -ERESTARTSYS\n",dc->cmd); + else if (ret) + dprintk(1, "av7110_osd_cmd(%d) returns with %d\n",dc->cmd,ret); + + return ret; +} + +int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap) +{ + switch (cap->cmd) { + case OSD_CAP_MEMSIZE: + if (FW_4M_SDRAM(av7110->arm_app)) + cap->val = 1000000; + else + cap->val = 92000; + return 0; + default: + return -EINVAL; + } +} +#endif /* CONFIG_DVB_AV7110_OSD */ diff --git a/drivers/media/pci/ttpci/av7110_hw.h b/drivers/media/pci/ttpci/av7110_hw.h new file mode 100644 index 00000000..1634aba5 --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_hw.h @@ -0,0 +1,495 @@ +#ifndef _AV7110_HW_H_ +#define _AV7110_HW_H_ + +#include "av7110.h" + +/* DEBI transfer mode defs */ + +#define DEBINOSWAP 0x000e0000 +#define DEBISWAB 0x001e0000 +#define DEBISWAP 0x002e0000 + +#define ARM_WAIT_FREE (HZ) +#define ARM_WAIT_SHAKE (HZ/5) +#define ARM_WAIT_OSD (HZ) + + +enum av7110_bootstate +{ + BOOTSTATE_BUFFER_EMPTY = 0, + BOOTSTATE_BUFFER_FULL = 1, + BOOTSTATE_AV7110_BOOT_COMPLETE = 2 +}; + +enum av7110_type_rec_play_format +{ RP_None, + AudioPES, + AudioMp2, + AudioPCM, + VideoPES, + AV_PES +}; + +enum av7110_osd_palette_type +{ + NoPalet = 0, /* No palette */ + Pal1Bit = 2, /* 2 colors for 1 Bit Palette */ + Pal2Bit = 4, /* 4 colors for 2 bit palette */ + Pal4Bit = 16, /* 16 colors for 4 bit palette */ + Pal8Bit = 256 /* 256 colors for 16 bit palette */ +}; + +/* switch defines */ +#define SB_GPIO 3 +#define SB_OFF SAA7146_GPIO_OUTLO /* SlowBlank off (TV-Mode) */ +#define SB_ON SAA7146_GPIO_INPUT /* SlowBlank on (AV-Mode) */ +#define SB_WIDE SAA7146_GPIO_OUTHI /* SlowBlank 6V (16/9-Mode) (not implemented) */ + +#define FB_GPIO 1 +#define FB_OFF SAA7146_GPIO_LO /* FastBlank off (CVBS-Mode) */ +#define FB_ON SAA7146_GPIO_OUTHI /* FastBlank on (RGB-Mode) */ +#define FB_LOOP SAA7146_GPIO_INPUT /* FastBlank loop-through (PC graphics ???) */ + +enum av7110_video_output_mode +{ + NO_OUT = 0, /* disable analog output */ + CVBS_RGB_OUT = 1, + CVBS_YC_OUT = 2, + YC_OUT = 3 +}; + +/* firmware internal msg q status: */ +#define GPMQFull 0x0001 /* Main Message Queue Full */ +#define GPMQOver 0x0002 /* Main Message Queue Overflow */ +#define HPQFull 0x0004 /* High Priority Msg Queue Full */ +#define HPQOver 0x0008 +#define OSDQFull 0x0010 /* OSD Queue Full */ +#define OSDQOver 0x0020 +#define GPMQBusy 0x0040 /* Queue not empty, FW >= 261d */ +#define HPQBusy 0x0080 +#define OSDQBusy 0x0100 + +/* hw section filter flags */ +#define SECTION_EIT 0x01 +#define SECTION_SINGLE 0x00 +#define SECTION_CYCLE 0x02 +#define SECTION_CONTINUOS 0x04 +#define SECTION_MODE 0x06 +#define SECTION_IPMPE 0x0C /* size up to 4k */ +#define SECTION_HIGH_SPEED 0x1C /* larger buffer */ +#define DATA_PIPING_FLAG 0x20 /* for Data Piping Filter */ + +#define PBUFSIZE_NONE 0x0000 +#define PBUFSIZE_1P 0x0100 +#define PBUFSIZE_2P 0x0200 +#define PBUFSIZE_1K 0x0300 +#define PBUFSIZE_2K 0x0400 +#define PBUFSIZE_4K 0x0500 +#define PBUFSIZE_8K 0x0600 +#define PBUFSIZE_16K 0x0700 +#define PBUFSIZE_32K 0x0800 + + +/* firmware command codes */ +enum av7110_osd_command { + WCreate, + WDestroy, + WMoveD, + WMoveA, + WHide, + WTop, + DBox, + DLine, + DText, + Set_Font, + SetColor, + SetBlend, + SetWBlend, + SetCBlend, + SetNonBlend, + LoadBmp, + BlitBmp, + ReleaseBmp, + SetWTrans, + SetWNoTrans, + Set_Palette +}; + +enum av7110_pid_command { + MultiPID, + VideoPID, + AudioPID, + InitFilt, + FiltError, + NewVersion, + CacheError, + AddPIDFilter, + DelPIDFilter, + Scan, + SetDescr, + SetIR, + FlushTSQueue +}; + +enum av7110_mpeg_command { + SelAudChannels +}; + +enum av7110_audio_command { + AudioDAC, + CabADAC, + ON22K, + OFF22K, + MainSwitch, + ADSwitch, + SendDiSEqC, + SetRegister, + SpdifSwitch +}; + +enum av7110_request_command { + AudioState, + AudioBuffState, + VideoState1, + VideoState2, + VideoState3, + CrashCounter, + ReqVersion, + ReqVCXO, + ReqRegister, + ReqSecFilterError, + ReqSTC +}; + +enum av7110_encoder_command { + SetVidMode, + SetTestMode, + LoadVidCode, + SetMonitorType, + SetPanScanType, + SetFreezeMode, + SetWSSConfig +}; + +enum av7110_rec_play_state { + __Record, + __Stop, + __Play, + __Pause, + __Slow, + __FF_IP, + __Scan_I, + __Continue +}; + +enum av7110_fw_cmd_misc { + AV7110_FW_VIDEO_ZOOM = 1, + AV7110_FW_VIDEO_COMMAND, + AV7110_FW_AUDIO_COMMAND +}; + +enum av7110_command_type { + COMTYPE_NOCOM, + COMTYPE_PIDFILTER, + COMTYPE_MPEGDECODER, + COMTYPE_OSD, + COMTYPE_BMP, + COMTYPE_ENCODER, + COMTYPE_AUDIODAC, + COMTYPE_REQUEST, + COMTYPE_SYSTEM, + COMTYPE_REC_PLAY, + COMTYPE_COMMON_IF, + COMTYPE_PID_FILTER, + COMTYPE_PES, + COMTYPE_TS, + COMTYPE_VIDEO, + COMTYPE_AUDIO, + COMTYPE_CI_LL, + COMTYPE_MISC = 0x80 +}; + +#define VID_NONE_PREF 0x00 /* No aspect ration processing preferred */ +#define VID_PAN_SCAN_PREF 0x01 /* Pan and Scan Display preferred */ +#define VID_VERT_COMP_PREF 0x02 /* Vertical compression display preferred */ +#define VID_VC_AND_PS_PREF 0x03 /* PanScan and vertical Compression if allowed */ +#define VID_CENTRE_CUT_PREF 0x05 /* PanScan with zero vector */ + +/* MPEG video decoder commands */ +#define AV_VIDEO_CMD_STOP 0x000e +#define AV_VIDEO_CMD_PLAY 0x000d +#define AV_VIDEO_CMD_FREEZE 0x0102 +#define AV_VIDEO_CMD_FFWD 0x0016 +#define AV_VIDEO_CMD_SLOW 0x0022 + +/* MPEG audio decoder commands */ +#define AUDIO_CMD_MUTE 0x0001 +#define AUDIO_CMD_UNMUTE 0x0002 +#define AUDIO_CMD_PCM16 0x0010 +#define AUDIO_CMD_STEREO 0x0080 +#define AUDIO_CMD_MONO_L 0x0100 +#define AUDIO_CMD_MONO_R 0x0200 +#define AUDIO_CMD_SYNC_OFF 0x000e +#define AUDIO_CMD_SYNC_ON 0x000f + +/* firmware data interface codes */ +#define DATA_NONE 0x00 +#define DATA_FSECTION 0x01 +#define DATA_IPMPE 0x02 +#define DATA_MPEG_RECORD 0x03 +#define DATA_DEBUG_MESSAGE 0x04 +#define DATA_COMMON_INTERFACE 0x05 +#define DATA_MPEG_PLAY 0x06 +#define DATA_BMP_LOAD 0x07 +#define DATA_IRCOMMAND 0x08 +#define DATA_PIPING 0x09 +#define DATA_STREAMING 0x0a +#define DATA_CI_GET 0x0b +#define DATA_CI_PUT 0x0c +#define DATA_MPEG_VIDEO_EVENT 0x0d + +#define DATA_PES_RECORD 0x10 +#define DATA_PES_PLAY 0x11 +#define DATA_TS_RECORD 0x12 +#define DATA_TS_PLAY 0x13 + +/* ancient CI command codes, only two are actually still used + * by the link level CI firmware */ +#define CI_CMD_ERROR 0x00 +#define CI_CMD_ACK 0x01 +#define CI_CMD_SYSTEM_READY 0x02 +#define CI_CMD_KEYPRESS 0x03 +#define CI_CMD_ON_TUNED 0x04 +#define CI_CMD_ON_SWITCH_PROGRAM 0x05 +#define CI_CMD_SECTION_ARRIVED 0x06 +#define CI_CMD_SECTION_TIMEOUT 0x07 +#define CI_CMD_TIME 0x08 +#define CI_CMD_ENTER_MENU 0x09 +#define CI_CMD_FAST_PSI 0x0a +#define CI_CMD_GET_SLOT_INFO 0x0b + +#define CI_MSG_NONE 0x00 +#define CI_MSG_CI_INFO 0x01 +#define CI_MSG_MENU 0x02 +#define CI_MSG_LIST 0x03 +#define CI_MSG_TEXT 0x04 +#define CI_MSG_REQUEST_INPUT 0x05 +#define CI_MSG_INPUT_COMPLETE 0x06 +#define CI_MSG_LIST_MORE 0x07 +#define CI_MSG_MENU_MORE 0x08 +#define CI_MSG_CLOSE_MMI_IMM 0x09 +#define CI_MSG_SECTION_REQUEST 0x0a +#define CI_MSG_CLOSE_FILTER 0x0b +#define CI_PSI_COMPLETE 0x0c +#define CI_MODULE_READY 0x0d +#define CI_SWITCH_PRG_REPLY 0x0e +#define CI_MSG_TEXT_MORE 0x0f + +#define CI_MSG_CA_PMT 0xe0 +#define CI_MSG_ERROR 0xf0 + + +/* base address of the dual ported RAM which serves as communication + * area between PCI bus and av7110, + * as seen by the DEBI bus of the saa7146 */ +#define DPRAM_BASE 0x4000 + +/* boot protocol area */ +#define AV7110_BOOT_STATE (DPRAM_BASE + 0x3F8) +#define AV7110_BOOT_SIZE (DPRAM_BASE + 0x3FA) +#define AV7110_BOOT_BASE (DPRAM_BASE + 0x3FC) +#define AV7110_BOOT_BLOCK (DPRAM_BASE + 0x400) +#define AV7110_BOOT_MAX_SIZE 0xc00 + +/* firmware command protocol area */ +#define IRQ_STATE (DPRAM_BASE + 0x0F4) +#define IRQ_STATE_EXT (DPRAM_BASE + 0x0F6) +#define MSGSTATE (DPRAM_BASE + 0x0F8) +#define COMMAND (DPRAM_BASE + 0x0FC) +#define COM_BUFF (DPRAM_BASE + 0x100) +#define COM_BUFF_SIZE 0x20 + +/* various data buffers */ +#define BUFF1_BASE (DPRAM_BASE + 0x120) +#define BUFF1_SIZE 0xE0 + +#define DATA_BUFF0_BASE (DPRAM_BASE + 0x200) +#define DATA_BUFF0_SIZE 0x0800 + +#define DATA_BUFF1_BASE (DATA_BUFF0_BASE+DATA_BUFF0_SIZE) +#define DATA_BUFF1_SIZE 0x0800 + +#define DATA_BUFF2_BASE (DATA_BUFF1_BASE+DATA_BUFF1_SIZE) +#define DATA_BUFF2_SIZE 0x0800 + +#define DATA_BUFF3_BASE (DATA_BUFF2_BASE+DATA_BUFF2_SIZE) +#define DATA_BUFF3_SIZE 0x0400 + +#define Reserved (DPRAM_BASE + 0x1E00) +#define Reserved_SIZE 0x1C0 + + +/* firmware status area */ +#define STATUS_BASE (DPRAM_BASE + 0x1FC0) +#define STATUS_LOOPS (STATUS_BASE + 0x08) + +#define STATUS_MPEG_WIDTH (STATUS_BASE + 0x0C) +/* ((aspect_ratio & 0xf) << 12) | (height & 0xfff) */ +#define STATUS_MPEG_HEIGHT_AR (STATUS_BASE + 0x0E) + +/* firmware data protocol area */ +#define RX_TYPE (DPRAM_BASE + 0x1FE8) +#define RX_LEN (DPRAM_BASE + 0x1FEA) +#define TX_TYPE (DPRAM_BASE + 0x1FEC) +#define TX_LEN (DPRAM_BASE + 0x1FEE) + +#define RX_BUFF (DPRAM_BASE + 0x1FF4) +#define TX_BUFF (DPRAM_BASE + 0x1FF6) + +#define HANDSHAKE_REG (DPRAM_BASE + 0x1FF8) +#define COM_IF_LOCK (DPRAM_BASE + 0x1FFA) + +#define IRQ_RX (DPRAM_BASE + 0x1FFC) +#define IRQ_TX (DPRAM_BASE + 0x1FFE) + +/* used by boot protocol to load firmware into av7110 DRAM */ +#define DRAM_START_CODE 0x2e000404 +#define DRAM_MAX_CODE_SIZE 0x00100000 + +/* saa7146 gpio lines */ +#define RESET_LINE 2 +#define DEBI_DONE_LINE 1 +#define ARM_IRQ_LINE 0 + + + +extern int av7110_bootarm(struct av7110 *av7110); +extern int av7110_firmversion(struct av7110 *av7110); +#define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000) +#define FW_4M_SDRAM(arm_app) ((arm_app) & 0x40000000) +#define FW_VERSION(arm_app) ((arm_app) & 0x0000FFFF) + +extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags); +extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...); +extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, + int request_buf_len, u16 *reply_buf, int reply_buf_len); + + +/* DEBI (saa7146 data extension bus interface) access */ +extern int av7110_debiwrite(struct av7110 *av7110, u32 config, + int addr, u32 val, int count); +extern u32 av7110_debiread(struct av7110 *av7110, u32 config, + int addr, int count); + + +/* DEBI during interrupt */ +/* single word writes */ +static inline void iwdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count) +{ + av7110_debiwrite(av7110, config, addr, val, count); +} + +/* buffer writes */ +static inline void mwdebi(struct av7110 *av7110, u32 config, int addr, + const u8 *val, int count) +{ + memcpy(av7110->debi_virt, val, count); + av7110_debiwrite(av7110, config, addr, 0, count); +} + +static inline u32 irdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count) +{ + u32 res; + + res=av7110_debiread(av7110, config, addr, count); + if (count<=4) + memcpy(av7110->debi_virt, (char *) &res, count); + return res; +} + +/* DEBI outside interrupts, only for count <= 4! */ +static inline void wdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count) +{ + unsigned long flags; + + spin_lock_irqsave(&av7110->debilock, flags); + av7110_debiwrite(av7110, config, addr, val, count); + spin_unlock_irqrestore(&av7110->debilock, flags); +} + +static inline u32 rdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count) +{ + unsigned long flags; + u32 res; + + spin_lock_irqsave(&av7110->debilock, flags); + res=av7110_debiread(av7110, config, addr, count); + spin_unlock_irqrestore(&av7110->debilock, flags); + return res; +} + +/* handle mailbox registers of the dual ported RAM */ +static inline void ARM_ResetMailBox(struct av7110 *av7110) +{ + unsigned long flags; + + spin_lock_irqsave(&av7110->debilock, flags); + av7110_debiread(av7110, DEBINOSWAP, IRQ_RX, 2); + av7110_debiwrite(av7110, DEBINOSWAP, IRQ_RX, 0, 2); + spin_unlock_irqrestore(&av7110->debilock, flags); +} + +static inline void ARM_ClearMailBox(struct av7110 *av7110) +{ + iwdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2); +} + +static inline void ARM_ClearIrq(struct av7110 *av7110) +{ + irdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2); +} + +/**************************************************************************** + * Firmware commands + ****************************************************************************/ + +static inline int SendDAC(struct av7110 *av7110, u8 addr, u8 data) +{ + return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, AudioDAC, 2, addr, data); +} + +static inline int av7710_set_video_mode(struct av7110 *av7110, int mode) +{ + return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetVidMode, 1, mode); +} + +static inline int vidcom(struct av7110 *av7110, u32 com, u32 arg) +{ + return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_VIDEO_COMMAND, 4, + (com>>16), (com&0xffff), + (arg>>16), (arg&0xffff)); +} + +static inline int audcom(struct av7110 *av7110, u32 com) +{ + return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_AUDIO_COMMAND, 2, + (com>>16), (com&0xffff)); +} + +static inline int Set22K(struct av7110 *av7110, int state) +{ + return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, (state ? ON22K : OFF22K), 0); +} + + +extern int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long burst); + + +#ifdef CONFIG_DVB_AV7110_OSD +extern int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc); +extern int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap); +#endif /* CONFIG_DVB_AV7110_OSD */ + + + +#endif /* _AV7110_HW_H_ */ diff --git a/drivers/media/pci/ttpci/av7110_ipack.c b/drivers/media/pci/ttpci/av7110_ipack.c new file mode 100644 index 00000000..699ef8b5 --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_ipack.c @@ -0,0 +1,403 @@ +#include "dvb_filter.h" +#include "av7110_ipack.h" +#include /* for memcpy() */ +#include + + +void av7110_ipack_reset(struct ipack *p) +{ + p->found = 0; + p->cid = 0; + p->plength = 0; + p->flag1 = 0; + p->flag2 = 0; + p->hlength = 0; + p->mpeg = 0; + p->check = 0; + p->which = 0; + p->done = 0; + p->count = 0; +} + + +int av7110_ipack_init(struct ipack *p, int size, + void (*func)(u8 *buf, int size, void *priv)) +{ + if (!(p->buf = vmalloc(size*sizeof(u8)))) { + printk(KERN_WARNING "Couldn't allocate memory for ipack\n"); + return -ENOMEM; + } + p->size = size; + p->func = func; + p->repack_subids = 0; + av7110_ipack_reset(p); + return 0; +} + + +void av7110_ipack_free(struct ipack *p) +{ + vfree(p->buf); +} + + +static void send_ipack(struct ipack *p) +{ + int off; + struct dvb_audio_info ai; + int ac3_off = 0; + int streamid = 0; + int nframes = 0; + int f = 0; + + switch (p->mpeg) { + case 2: + if (p->count < 10) + return; + p->buf[3] = p->cid; + p->buf[4] = (u8)(((p->count - 6) & 0xff00) >> 8); + p->buf[5] = (u8)((p->count - 6) & 0x00ff); + if (p->repack_subids && p->cid == PRIVATE_STREAM1) { + off = 9 + p->buf[8]; + streamid = p->buf[off]; + if ((streamid & 0xf8) == 0x80) { + ai.off = 0; + ac3_off = ((p->buf[off + 2] << 8)| + p->buf[off + 3]); + if (ac3_off < p->count) + f = dvb_filter_get_ac3info(p->buf + off + 3 + ac3_off, + p->count - ac3_off, &ai, 0); + if (!f) { + nframes = (p->count - off - 3 - ac3_off) / + ai.framesize + 1; + p->buf[off + 2] = (ac3_off >> 8) & 0xff; + p->buf[off + 3] = (ac3_off) & 0xff; + p->buf[off + 1] = nframes; + ac3_off += nframes * ai.framesize - p->count; + } + } + } + p->func(p->buf, p->count, p->data); + + p->buf[6] = 0x80; + p->buf[7] = 0x00; + p->buf[8] = 0x00; + p->count = 9; + if (p->repack_subids && p->cid == PRIVATE_STREAM1 + && (streamid & 0xf8) == 0x80) { + p->count += 4; + p->buf[9] = streamid; + p->buf[10] = (ac3_off >> 8) & 0xff; + p->buf[11] = (ac3_off) & 0xff; + p->buf[12] = 0; + } + break; + + case 1: + if (p->count < 8) + return; + p->buf[3] = p->cid; + p->buf[4] = (u8)(((p->count - 6) & 0xff00) >> 8); + p->buf[5] = (u8)((p->count - 6) & 0x00ff); + p->func(p->buf, p->count, p->data); + + p->buf[6] = 0x0f; + p->count = 7; + break; + } +} + + +void av7110_ipack_flush(struct ipack *p) +{ + if (p->plength != MMAX_PLENGTH - 6 || p->found <= 6) + return; + p->plength = p->found - 6; + p->found = 0; + send_ipack(p); + av7110_ipack_reset(p); +} + + +static void write_ipack(struct ipack *p, const u8 *data, int count) +{ + u8 headr[3] = { 0x00, 0x00, 0x01 }; + + if (p->count < 6) { + memcpy(p->buf, headr, 3); + p->count = 6; + } + + if (p->count + count < p->size){ + memcpy(p->buf+p->count, data, count); + p->count += count; + } else { + int rest = p->size - p->count; + memcpy(p->buf+p->count, data, rest); + p->count += rest; + send_ipack(p); + if (count - rest > 0) + write_ipack(p, data + rest, count - rest); + } +} + + +int av7110_ipack_instant_repack (const u8 *buf, int count, struct ipack *p) +{ + int l; + int c = 0; + + while (c < count && (p->mpeg == 0 || + (p->mpeg == 1 && p->found < 7) || + (p->mpeg == 2 && p->found < 9)) + && (p->found < 5 || !p->done)) { + switch (p->found) { + case 0: + case 1: + if (buf[c] == 0x00) + p->found++; + else + p->found = 0; + c++; + break; + case 2: + if (buf[c] == 0x01) + p->found++; + else if (buf[c] == 0) + p->found = 2; + else + p->found = 0; + c++; + break; + case 3: + p->cid = 0; + switch (buf[c]) { + case PROG_STREAM_MAP: + case PRIVATE_STREAM2: + case PROG_STREAM_DIR: + case ECM_STREAM : + case EMM_STREAM : + case PADDING_STREAM : + case DSM_CC_STREAM : + case ISO13522_STREAM: + p->done = 1; + /* fall through */ + case PRIVATE_STREAM1: + case VIDEO_STREAM_S ... VIDEO_STREAM_E: + case AUDIO_STREAM_S ... AUDIO_STREAM_E: + p->found++; + p->cid = buf[c]; + c++; + break; + default: + p->found = 0; + break; + } + break; + + case 4: + if (count-c > 1) { + p->plen[0] = buf[c]; + c++; + p->plen[1] = buf[c]; + c++; + p->found += 2; + p->plength = (p->plen[0] << 8) | p->plen[1]; + } else { + p->plen[0] = buf[c]; + p->found++; + return count; + } + break; + case 5: + p->plen[1] = buf[c]; + c++; + p->found++; + p->plength = (p->plen[0] << 8) | p->plen[1]; + break; + case 6: + if (!p->done) { + p->flag1 = buf[c]; + c++; + p->found++; + if ((p->flag1 & 0xc0) == 0x80) + p->mpeg = 2; + else { + p->hlength = 0; + p->which = 0; + p->mpeg = 1; + p->flag2 = 0; + } + } + break; + + case 7: + if (!p->done && p->mpeg == 2) { + p->flag2 = buf[c]; + c++; + p->found++; + } + break; + + case 8: + if (!p->done && p->mpeg == 2) { + p->hlength = buf[c]; + c++; + p->found++; + } + break; + } + } + + if (c == count) + return count; + + if (!p->plength) + p->plength = MMAX_PLENGTH - 6; + + if (p->done || ((p->mpeg == 2 && p->found >= 9) || + (p->mpeg == 1 && p->found >= 7))) { + switch (p->cid) { + case AUDIO_STREAM_S ... AUDIO_STREAM_E: + case VIDEO_STREAM_S ... VIDEO_STREAM_E: + case PRIVATE_STREAM1: + if (p->mpeg == 2 && p->found == 9) { + write_ipack(p, &p->flag1, 1); + write_ipack(p, &p->flag2, 1); + write_ipack(p, &p->hlength, 1); + } + + if (p->mpeg == 1 && p->found == 7) + write_ipack(p, &p->flag1, 1); + + if (p->mpeg == 2 && (p->flag2 & PTS_ONLY) && + p->found < 14) { + while (c < count && p->found < 14) { + p->pts[p->found - 9] = buf[c]; + write_ipack(p, buf + c, 1); + c++; + p->found++; + } + if (c == count) + return count; + } + + if (p->mpeg == 1 && p->which < 2000) { + + if (p->found == 7) { + p->check = p->flag1; + p->hlength = 1; + } + + while (!p->which && c < count && + p->check == 0xff){ + p->check = buf[c]; + write_ipack(p, buf + c, 1); + c++; + p->found++; + p->hlength++; + } + + if (c == count) + return count; + + if ((p->check & 0xc0) == 0x40 && !p->which) { + p->check = buf[c]; + write_ipack(p, buf + c, 1); + c++; + p->found++; + p->hlength++; + + p->which = 1; + if (c == count) + return count; + p->check = buf[c]; + write_ipack(p, buf + c, 1); + c++; + p->found++; + p->hlength++; + p->which = 2; + if (c == count) + return count; + } + + if (p->which == 1) { + p->check = buf[c]; + write_ipack(p, buf + c, 1); + c++; + p->found++; + p->hlength++; + p->which = 2; + if (c == count) + return count; + } + + if ((p->check & 0x30) && p->check != 0xff) { + p->flag2 = (p->check & 0xf0) << 2; + p->pts[0] = p->check; + p->which = 3; + } + + if (c == count) + return count; + if (p->which > 2){ + if ((p->flag2 & PTS_DTS_FLAGS) == PTS_ONLY) { + while (c < count && p->which < 7) { + p->pts[p->which - 2] = buf[c]; + write_ipack(p, buf + c, 1); + c++; + p->found++; + p->which++; + p->hlength++; + } + if (c == count) + return count; + } else if ((p->flag2 & PTS_DTS_FLAGS) == PTS_DTS) { + while (c < count && p->which < 12) { + if (p->which < 7) + p->pts[p->which - 2] = buf[c]; + write_ipack(p, buf + c, 1); + c++; + p->found++; + p->which++; + p->hlength++; + } + if (c == count) + return count; + } + p->which = 2000; + } + + } + + while (c < count && p->found < p->plength + 6) { + l = count - c; + if (l + p->found > p->plength + 6) + l = p->plength + 6 - p->found; + write_ipack(p, buf + c, l); + p->found += l; + c += l; + } + break; + } + + + if (p->done) { + if (p->found + count - c < p->plength + 6) { + p->found += count - c; + c = count; + } else { + c += p->plength + 6 - p->found; + p->found = p->plength + 6; + } + } + + if (p->plength && p->found == p->plength + 6) { + send_ipack(p); + av7110_ipack_reset(p); + if (c < count) + av7110_ipack_instant_repack(buf + c, count - c, p); + } + } + return count; +} diff --git a/drivers/media/pci/ttpci/av7110_ipack.h b/drivers/media/pci/ttpci/av7110_ipack.h new file mode 100644 index 00000000..becf94d3 --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_ipack.h @@ -0,0 +1,12 @@ +#ifndef _AV7110_IPACK_H_ +#define _AV7110_IPACK_H_ + +extern int av7110_ipack_init(struct ipack *p, int size, + void (*func)(u8 *buf, int size, void *priv)); + +extern void av7110_ipack_reset(struct ipack *p); +extern int av7110_ipack_instant_repack(const u8 *buf, int count, struct ipack *p); +extern void av7110_ipack_free(struct ipack * p); +extern void av7110_ipack_flush(struct ipack *p); + +#endif diff --git a/drivers/media/pci/ttpci/av7110_ir.c b/drivers/media/pci/ttpci/av7110_ir.c new file mode 100644 index 00000000..0e763a78 --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_ir.c @@ -0,0 +1,415 @@ +/* + * Driver for the remote control of SAA7146 based AV7110 cards + * + * Copyright (C) 1999-2003 Holger Waechtler + * Copyright (C) 2003-2007 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + */ + + +#include +#include +#include +#include +#include +#include + +#include "av7110.h" +#include "av7110_hw.h" + + +#define AV_CNT 4 + +#define IR_RC5 0 +#define IR_RCMM 1 +#define IR_RC5_EXT 2 /* internal only */ + +#define IR_ALL 0xffffffff + +#define UP_TIMEOUT (HZ*7/25) + + +/* Note: enable ir debugging by or'ing debug with 16 */ + +static int ir_protocol[AV_CNT] = { IR_RCMM, IR_RCMM, IR_RCMM, IR_RCMM}; +module_param_array(ir_protocol, int, NULL, 0644); +MODULE_PARM_DESC(ir_protocol, "Infrared protocol: 0 RC5, 1 RCMM (default)"); + +static int ir_inversion[AV_CNT]; +module_param_array(ir_inversion, int, NULL, 0644); +MODULE_PARM_DESC(ir_inversion, "Inversion of infrared signal: 0 not inverted (default), 1 inverted"); + +static uint ir_device_mask[AV_CNT] = { IR_ALL, IR_ALL, IR_ALL, IR_ALL }; +module_param_array(ir_device_mask, uint, NULL, 0644); +MODULE_PARM_DESC(ir_device_mask, "Bitmask of infrared devices: bit 0..31 = device 0..31 (default: all)"); + + +static int av_cnt; +static struct av7110 *av_list[AV_CNT]; + +static u16 default_key_map [256] = { + KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, + KEY_8, KEY_9, KEY_BACK, 0, KEY_POWER, KEY_MUTE, 0, KEY_INFO, + KEY_VOLUMEUP, KEY_VOLUMEDOWN, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + KEY_CHANNELUP, KEY_CHANNELDOWN, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, KEY_TEXT, 0, 0, KEY_TV, 0, 0, 0, 0, 0, KEY_SETUP, 0, 0, + 0, 0, 0, KEY_SUBTITLE, 0, 0, KEY_LANGUAGE, 0, + KEY_RADIO, 0, 0, 0, 0, KEY_EXIT, 0, 0, + KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_OK, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RED, KEY_GREEN, KEY_YELLOW, + KEY_BLUE, 0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_LIST, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, KEY_UP, KEY_UP, KEY_DOWN, KEY_DOWN, + 0, 0, 0, 0, KEY_EPG, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_VCR +}; + + +/* key-up timer */ +static void av7110_emit_keyup(unsigned long parm) +{ + struct infrared *ir = (struct infrared *) parm; + + if (!ir || !test_bit(ir->last_key, ir->input_dev->key)) + return; + + input_report_key(ir->input_dev, ir->last_key, 0); + input_sync(ir->input_dev); +} + + +/* tasklet */ +static void av7110_emit_key(unsigned long parm) +{ + struct infrared *ir = (struct infrared *) parm; + u32 ircom = ir->ir_command; + u8 data; + u8 addr; + u16 toggle; + u16 keycode; + + /* extract device address and data */ + switch (ir->protocol) { + case IR_RC5: /* RC5: 5 bits device address, 6 bits data */ + data = ircom & 0x3f; + addr = (ircom >> 6) & 0x1f; + toggle = ircom & 0x0800; + break; + + case IR_RCMM: /* RCMM: ? bits device address, ? bits data */ + data = ircom & 0xff; + addr = (ircom >> 8) & 0x1f; + toggle = ircom & 0x8000; + break; + + case IR_RC5_EXT: /* extended RC5: 5 bits device address, 7 bits data */ + data = ircom & 0x3f; + addr = (ircom >> 6) & 0x1f; + /* invert 7th data bit for backward compatibility with RC5 keymaps */ + if (!(ircom & 0x1000)) + data |= 0x40; + toggle = ircom & 0x0800; + break; + + default: + printk("%s invalid protocol %x\n", __func__, ir->protocol); + return; + } + + input_event(ir->input_dev, EV_MSC, MSC_RAW, (addr << 16) | data); + input_event(ir->input_dev, EV_MSC, MSC_SCAN, data); + + keycode = ir->key_map[data]; + + dprintk(16, "%s: code %08x -> addr %i data 0x%02x -> keycode %i\n", + __func__, ircom, addr, data, keycode); + + /* check device address */ + if (!(ir->device_mask & (1 << addr))) + return; + + if (!keycode) { + printk ("%s: code %08x -> addr %i data 0x%02x -> unknown key!\n", + __func__, ircom, addr, data); + return; + } + + if (timer_pending(&ir->keyup_timer)) { + del_timer(&ir->keyup_timer); + if (ir->last_key != keycode || toggle != ir->last_toggle) { + ir->delay_timer_finished = 0; + input_event(ir->input_dev, EV_KEY, ir->last_key, 0); + input_event(ir->input_dev, EV_KEY, keycode, 1); + input_sync(ir->input_dev); + } else if (ir->delay_timer_finished) { + input_event(ir->input_dev, EV_KEY, keycode, 2); + input_sync(ir->input_dev); + } + } else { + ir->delay_timer_finished = 0; + input_event(ir->input_dev, EV_KEY, keycode, 1); + input_sync(ir->input_dev); + } + + ir->last_key = keycode; + ir->last_toggle = toggle; + + ir->keyup_timer.expires = jiffies + UP_TIMEOUT; + add_timer(&ir->keyup_timer); + +} + + +/* register with input layer */ +static void input_register_keys(struct infrared *ir) +{ + int i; + + set_bit(EV_KEY, ir->input_dev->evbit); + set_bit(EV_REP, ir->input_dev->evbit); + set_bit(EV_MSC, ir->input_dev->evbit); + + set_bit(MSC_RAW, ir->input_dev->mscbit); + set_bit(MSC_SCAN, ir->input_dev->mscbit); + + memset(ir->input_dev->keybit, 0, sizeof(ir->input_dev->keybit)); + + for (i = 0; i < ARRAY_SIZE(ir->key_map); i++) { + if (ir->key_map[i] > KEY_MAX) + ir->key_map[i] = 0; + else if (ir->key_map[i] > KEY_RESERVED) + set_bit(ir->key_map[i], ir->input_dev->keybit); + } + + ir->input_dev->keycode = ir->key_map; + ir->input_dev->keycodesize = sizeof(ir->key_map[0]); + ir->input_dev->keycodemax = ARRAY_SIZE(ir->key_map); +} + + +/* called by the input driver after rep[REP_DELAY] ms */ +static void input_repeat_key(unsigned long parm) +{ + struct infrared *ir = (struct infrared *) parm; + + ir->delay_timer_finished = 1; +} + + +/* check for configuration changes */ +int av7110_check_ir_config(struct av7110 *av7110, int force) +{ + int i; + int modified = force; + int ret = -ENODEV; + + for (i = 0; i < av_cnt; i++) + if (av7110 == av_list[i]) + break; + + if (i < av_cnt && av7110) { + if ((av7110->ir.protocol & 1) != ir_protocol[i] || + av7110->ir.inversion != ir_inversion[i]) + modified = true; + + if (modified) { + /* protocol */ + if (ir_protocol[i]) { + ir_protocol[i] = 1; + av7110->ir.protocol = IR_RCMM; + av7110->ir.ir_config = 0x0001; + } else if (FW_VERSION(av7110->arm_app) >= 0x2620) { + av7110->ir.protocol = IR_RC5_EXT; + av7110->ir.ir_config = 0x0002; + } else { + av7110->ir.protocol = IR_RC5; + av7110->ir.ir_config = 0x0000; + } + /* inversion */ + if (ir_inversion[i]) { + ir_inversion[i] = 1; + av7110->ir.ir_config |= 0x8000; + } + av7110->ir.inversion = ir_inversion[i]; + /* update ARM */ + ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, + av7110->ir.ir_config); + } else + ret = 0; + + /* address */ + if (av7110->ir.device_mask != ir_device_mask[i]) + av7110->ir.device_mask = ir_device_mask[i]; + } + + return ret; +} + + +/* /proc/av7110_ir interface */ +static ssize_t av7110_ir_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) +{ + char *page; + u32 ir_config; + int size = sizeof ir_config + sizeof av_list[0]->ir.key_map; + int i; + + if (count < size) + return -EINVAL; + + page = vmalloc(size); + if (!page) + return -ENOMEM; + + if (copy_from_user(page, buffer, size)) { + vfree(page); + return -EFAULT; + } + + memcpy(&ir_config, page, sizeof ir_config); + + for (i = 0; i < av_cnt; i++) { + /* keymap */ + memcpy(av_list[i]->ir.key_map, page + sizeof ir_config, + sizeof(av_list[i]->ir.key_map)); + /* protocol, inversion, address */ + ir_protocol[i] = ir_config & 0x0001; + ir_inversion[i] = ir_config & 0x8000 ? 1 : 0; + if (ir_config & 0x4000) + ir_device_mask[i] = 1 << ((ir_config >> 16) & 0x1f); + else + ir_device_mask[i] = IR_ALL; + /* update configuration */ + av7110_check_ir_config(av_list[i], false); + input_register_keys(&av_list[i]->ir); + } + vfree(page); + return count; +} + +static const struct file_operations av7110_ir_proc_fops = { + .owner = THIS_MODULE, + .write = av7110_ir_proc_write, + .llseek = noop_llseek, +}; + +/* interrupt handler */ +static void ir_handler(struct av7110 *av7110, u32 ircom) +{ + dprintk(4, "ir command = %08x\n", ircom); + av7110->ir.ir_command = ircom; + tasklet_schedule(&av7110->ir.ir_tasklet); +} + + +int av7110_ir_init(struct av7110 *av7110) +{ + struct input_dev *input_dev; + static struct proc_dir_entry *e; + int err; + + if (av_cnt >= ARRAY_SIZE(av_list)) + return -ENOSPC; + + av_list[av_cnt++] = av7110; + av7110_check_ir_config(av7110, true); + + init_timer(&av7110->ir.keyup_timer); + av7110->ir.keyup_timer.function = av7110_emit_keyup; + av7110->ir.keyup_timer.data = (unsigned long) &av7110->ir; + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + av7110->ir.input_dev = input_dev; + snprintf(av7110->ir.input_phys, sizeof(av7110->ir.input_phys), + "pci-%s/ir0", pci_name(av7110->dev->pci)); + + input_dev->name = "DVB on-card IR receiver"; + + input_dev->phys = av7110->ir.input_phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 2; + if (av7110->dev->pci->subsystem_vendor) { + input_dev->id.vendor = av7110->dev->pci->subsystem_vendor; + input_dev->id.product = av7110->dev->pci->subsystem_device; + } else { + input_dev->id.vendor = av7110->dev->pci->vendor; + input_dev->id.product = av7110->dev->pci->device; + } + input_dev->dev.parent = &av7110->dev->pci->dev; + /* initial keymap */ + memcpy(av7110->ir.key_map, default_key_map, sizeof av7110->ir.key_map); + input_register_keys(&av7110->ir); + err = input_register_device(input_dev); + if (err) { + input_free_device(input_dev); + return err; + } + input_dev->timer.function = input_repeat_key; + input_dev->timer.data = (unsigned long) &av7110->ir; + + if (av_cnt == 1) { + e = proc_create("av7110_ir", S_IWUSR, NULL, &av7110_ir_proc_fops); + if (e) + proc_set_size(e, 4 + 256 * sizeof(u16)); + } + + tasklet_init(&av7110->ir.ir_tasklet, av7110_emit_key, (unsigned long) &av7110->ir); + av7110->ir.ir_handler = ir_handler; + + return 0; +} + + +void av7110_ir_exit(struct av7110 *av7110) +{ + int i; + + if (av_cnt == 0) + return; + + del_timer_sync(&av7110->ir.keyup_timer); + av7110->ir.ir_handler = NULL; + tasklet_kill(&av7110->ir.ir_tasklet); + + for (i = 0; i < av_cnt; i++) + if (av_list[i] == av7110) { + av_list[i] = av_list[av_cnt-1]; + av_list[av_cnt-1] = NULL; + break; + } + + if (av_cnt == 1) + remove_proc_entry("av7110_ir", NULL); + + input_unregister_device(av7110->ir.input_dev); + + av_cnt--; +} + +//MODULE_AUTHOR("Holger Waechtler , Oliver Endriss "); +//MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/ttpci/av7110_v4l.c b/drivers/media/pci/ttpci/av7110_v4l.c new file mode 100644 index 00000000..6c4076ac --- /dev/null +++ b/drivers/media/pci/ttpci/av7110_v4l.c @@ -0,0 +1,966 @@ +/* + * av7110_v4l.c: av7110 video4linux interface for DVB and Siemens DVB-C analog module + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * originally based on code by: + * Copyright (C) 1998,1999 Christian Theiss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * the project's page is at http://www.linuxtv.org/ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +#include "av7110.h" +#include "av7110_hw.h" +#include "av7110_av.h" + +int msp_writereg(struct av7110 *av7110, u8 dev, u16 reg, u16 val) +{ + u8 msg[5] = { dev, reg >> 8, reg & 0xff, val >> 8 , val & 0xff }; + struct i2c_msg msgs = { .flags = 0, .len = 5, .buf = msg }; + + switch (av7110->adac_type) { + case DVB_ADAC_MSP34x0: + msgs.addr = 0x40; + break; + case DVB_ADAC_MSP34x5: + msgs.addr = 0x42; + break; + default: + return 0; + } + + if (i2c_transfer(&av7110->i2c_adap, &msgs, 1) != 1) { + dprintk(1, "dvb-ttpci: failed @ card %d, %u = %u\n", + av7110->dvb_adapter.num, reg, val); + return -EIO; + } + return 0; +} + +static int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val) +{ + u8 msg1[3] = { dev, reg >> 8, reg & 0xff }; + u8 msg2[2]; + struct i2c_msg msgs[2] = { + { .flags = 0 , .len = 3, .buf = msg1 }, + { .flags = I2C_M_RD, .len = 2, .buf = msg2 } + }; + + switch (av7110->adac_type) { + case DVB_ADAC_MSP34x0: + msgs[0].addr = 0x40; + msgs[1].addr = 0x40; + break; + case DVB_ADAC_MSP34x5: + msgs[0].addr = 0x42; + msgs[1].addr = 0x42; + break; + default: + return 0; + } + + if (i2c_transfer(&av7110->i2c_adap, &msgs[0], 2) != 2) { + dprintk(1, "dvb-ttpci: failed @ card %d, %u\n", + av7110->dvb_adapter.num, reg); + return -EIO; + } + *val = (msg2[0] << 8) | msg2[1]; + return 0; +} + +static struct v4l2_input inputs[4] = { + { + .index = 0, + .name = "DVB", + .type = V4L2_INPUT_TYPE_CAMERA, + .audioset = 1, + .tuner = 0, /* ignored */ + .std = V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, + .status = 0, + .capabilities = V4L2_IN_CAP_STD, + }, { + .index = 1, + .name = "Television", + .type = V4L2_INPUT_TYPE_TUNER, + .audioset = 1, + .tuner = 0, + .std = V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, + .status = 0, + .capabilities = V4L2_IN_CAP_STD, + }, { + .index = 2, + .name = "Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .audioset = 0, + .tuner = 0, + .std = V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, + .status = 0, + .capabilities = V4L2_IN_CAP_STD, + }, { + .index = 3, + .name = "Y/C", + .type = V4L2_INPUT_TYPE_CAMERA, + .audioset = 0, + .tuner = 0, + .std = V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, + .status = 0, + .capabilities = V4L2_IN_CAP_STD, + } +}; + +static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data) +{ + struct av7110 *av7110 = dev->ext_priv; + u8 buf[] = { 0x00, reg, data }; + struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 }; + + dprintk(4, "dev: %p\n", dev); + + if (1 != i2c_transfer(&av7110->i2c_adap, &msg, 1)) + return -1; + return 0; +} + +static int tuner_write(struct saa7146_dev *dev, u8 addr, u8 data [4]) +{ + struct av7110 *av7110 = dev->ext_priv; + struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = data, .len = 4 }; + + dprintk(4, "dev: %p\n", dev); + + if (1 != i2c_transfer(&av7110->i2c_adap, &msg, 1)) + return -1; + return 0; +} + +static int ves1820_set_tv_freq(struct saa7146_dev *dev, u32 freq) +{ + u32 div; + u8 config; + u8 buf[4]; + + dprintk(4, "freq: 0x%08x\n", freq); + + /* magic number: 614. tuning with the frequency given by v4l2 + is always off by 614*62.5 = 38375 kHz...*/ + div = freq + 614; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x8e; + + if (freq < (u32) (16 * 168.25)) + config = 0xa0; + else if (freq < (u32) (16 * 447.25)) + config = 0x90; + else + config = 0x30; + config &= ~0x02; + + buf[3] = config; + + return tuner_write(dev, 0x61, buf); +} + +static int stv0297_set_tv_freq(struct saa7146_dev *dev, u32 freq) +{ + struct av7110 *av7110 = (struct av7110*)dev->ext_priv; + u32 div; + u8 data[4]; + + div = (freq + 38900000 + 31250) / 62500; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0xce; + + if (freq < 45000000) + return -EINVAL; + else if (freq < 137000000) + data[3] = 0x01; + else if (freq < 403000000) + data[3] = 0x02; + else if (freq < 860000000) + data[3] = 0x04; + else + return -EINVAL; + + if (av7110->fe->ops.i2c_gate_ctrl) + av7110->fe->ops.i2c_gate_ctrl(av7110->fe, 1); + return tuner_write(dev, 0x63, data); +} + + + +static struct saa7146_standard analog_standard[]; +static struct saa7146_standard dvb_standard[]; +static struct saa7146_standard standard[]; + +static struct v4l2_audio msp3400_v4l2_audio = { + .index = 0, + .name = "Television", + .capability = V4L2_AUDCAP_STEREO +}; + +static int av7110_dvb_c_switch(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + struct av7110 *av7110 = (struct av7110*)dev->ext_priv; + u16 adswitch; + int source, sync, err; + + dprintk(4, "%p\n", av7110); + + if ((vv->video_status & STATUS_OVERLAY) != 0) { + vv->ov_suspend = vv->video_fh; + err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */ + if (err != 0) { + dprintk(2, "suspending video failed\n"); + vv->ov_suspend = NULL; + } + } + + if (0 != av7110->current_input) { + dprintk(1, "switching to analog TV:\n"); + adswitch = 1; + source = SAA7146_HPS_SOURCE_PORT_B; + sync = SAA7146_HPS_SYNC_PORT_B; + memcpy(standard, analog_standard, sizeof(struct saa7146_standard) * 2); + + switch (av7110->current_input) { + case 1: + dprintk(1, "switching SAA7113 to Analog Tuner Input\n"); + msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0000); // loudspeaker source + msp_writereg(av7110, MSP_WR_DSP, 0x0009, 0x0000); // headphone source + msp_writereg(av7110, MSP_WR_DSP, 0x000a, 0x0000); // SCART 1 source + msp_writereg(av7110, MSP_WR_DSP, 0x000e, 0x3000); // FM matrix, mono + msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x4f00); // loudspeaker + headphone + msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0x4f00); // SCART 1 volume + + if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) { + if (ves1820_writereg(dev, 0x09, 0x0f, 0x60)) + dprintk(1, "setting band in demodulator failed\n"); + } else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) { + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // TDA9819 pin9(STD) + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); // TDA9819 pin30(VIF) + } + if (i2c_writereg(av7110, 0x48, 0x02, 0xd0) != 1) + dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num); + break; + case 2: + dprintk(1, "switching SAA7113 to Video AV CVBS Input\n"); + if (i2c_writereg(av7110, 0x48, 0x02, 0xd2) != 1) + dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num); + break; + case 3: + dprintk(1, "switching SAA7113 to Video AV Y/C Input\n"); + if (i2c_writereg(av7110, 0x48, 0x02, 0xd9) != 1) + dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num); + break; + default: + dprintk(1, "switching SAA7113 to Input: AV7110: SAA7113: invalid input\n"); + } + } else { + adswitch = 0; + source = SAA7146_HPS_SOURCE_PORT_A; + sync = SAA7146_HPS_SYNC_PORT_A; + memcpy(standard, dvb_standard, sizeof(struct saa7146_standard) * 2); + dprintk(1, "switching DVB mode\n"); + msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220); // loudspeaker source + msp_writereg(av7110, MSP_WR_DSP, 0x0009, 0x0220); // headphone source + msp_writereg(av7110, MSP_WR_DSP, 0x000a, 0x0220); // SCART 1 source + msp_writereg(av7110, MSP_WR_DSP, 0x000e, 0x3000); // FM matrix, mono + msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x7f00); // loudspeaker + headphone + msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0x7f00); // SCART 1 volume + + if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) { + if (ves1820_writereg(dev, 0x09, 0x0f, 0x20)) + dprintk(1, "setting band in demodulator failed\n"); + } else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) { + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD) + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF) + } + } + + /* hmm, this does not do anything!? */ + if (av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, adswitch)) + dprintk(1, "ADSwitch error\n"); + + saa7146_set_hps_source_and_sync(dev, source, sync); + + if (vv->ov_suspend != NULL) { + saa7146_start_preview(vv->ov_suspend); + vv->ov_suspend = NULL; + } + + return 0; +} + +static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + u16 stereo_det; + s8 stereo; + + dprintk(2, "VIDIOC_G_TUNER: %d\n", t->index); + + if (!av7110->analog_tuner_flags || t->index != 0) + return -EINVAL; + + memset(t, 0, sizeof(*t)); + strcpy((char *)t->name, "Television"); + + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; + t->rangelow = 772; /* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */ + t->rangehigh = 13684; /* 855.25 MHz / 62.5 kHz = 13684 */ + /* FIXME: add the real signal strength here */ + t->signal = 0xffff; + t->afc = 0; + + /* FIXME: standard / stereo detection is still broken */ + msp_readreg(av7110, MSP_RD_DEM, 0x007e, &stereo_det); + dprintk(1, "VIDIOC_G_TUNER: msp3400 TV standard detection: 0x%04x\n", stereo_det); + msp_readreg(av7110, MSP_RD_DSP, 0x0018, &stereo_det); + dprintk(1, "VIDIOC_G_TUNER: msp3400 stereo detection: 0x%04x\n", stereo_det); + stereo = (s8)(stereo_det >> 8); + if (stereo > 0x10) { + /* stereo */ + t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; + t->audmode = V4L2_TUNER_MODE_STEREO; + } else if (stereo < -0x10) { + /* bilingual */ + t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + t->audmode = V4L2_TUNER_MODE_LANG1; + } else /* mono */ + t->rxsubchans = V4L2_TUNER_SUB_MONO; + + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + u16 fm_matrix, src; + dprintk(2, "VIDIOC_S_TUNER: %d\n", t->index); + + if (!av7110->analog_tuner_flags || av7110->current_input != 1) + return -EINVAL; + + switch (t->audmode) { + case V4L2_TUNER_MODE_STEREO: + dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n"); + fm_matrix = 0x3001; /* stereo */ + src = 0x0020; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n"); + fm_matrix = 0x3000; /* bilingual */ + src = 0x0020; + break; + case V4L2_TUNER_MODE_LANG1: + dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n"); + fm_matrix = 0x3000; /* mono */ + src = 0x0000; + break; + case V4L2_TUNER_MODE_LANG2: + dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG2\n"); + fm_matrix = 0x3000; /* mono */ + src = 0x0010; + break; + default: /* case V4L2_TUNER_MODE_MONO: */ + dprintk(2, "VIDIOC_S_TUNER: TDA9840_SET_MONO\n"); + fm_matrix = 0x3000; /* mono */ + src = 0x0030; + break; + } + msp_writereg(av7110, MSP_WR_DSP, 0x000e, fm_matrix); + msp_writereg(av7110, MSP_WR_DSP, 0x0008, src); + msp_writereg(av7110, MSP_WR_DSP, 0x0009, src); + msp_writereg(av7110, MSP_WR_DSP, 0x000a, src); + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_G_FREQ: freq:0x%08x\n", f->frequency); + + if (!av7110->analog_tuner_flags || av7110->current_input != 1) + return -EINVAL; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = av7110->current_freq; + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_S_FREQUENCY: freq:0x%08x\n", f->frequency); + + if (!av7110->analog_tuner_flags || av7110->current_input != 1) + return -EINVAL; + + if (V4L2_TUNER_ANALOG_TV != f->type) + return -EINVAL; + + msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0xffe0); /* fast mute */ + msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0xffe0); + + /* tune in desired frequency */ + if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) + ves1820_set_tv_freq(dev, f->frequency); + else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) + stv0297_set_tv_freq(dev, f->frequency); + av7110->current_freq = f->frequency; + + msp_writereg(av7110, MSP_WR_DSP, 0x0015, 0x003f); /* start stereo detection */ + msp_writereg(av7110, MSP_WR_DSP, 0x0015, 0x0000); + msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x4f00); /* loudspeaker + headphone */ + msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0x4f00); /* SCART 1 volume */ + return 0; +} + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_ENUMINPUT: %d\n", i->index); + + if (av7110->analog_tuner_flags) { + if (i->index >= 4) + return -EINVAL; + } else { + if (i->index != 0) + return -EINVAL; + } + + memcpy(i, &inputs[i->index], sizeof(struct v4l2_input)); + + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + *input = av7110->current_input; + dprintk(2, "VIDIOC_G_INPUT: %d\n", *input); + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_S_INPUT: %d\n", input); + + if (!av7110->analog_tuner_flags) + return input ? -EINVAL : 0; + + if (input >= 4) + return -EINVAL; + + av7110->current_input = input; + return av7110_dvb_c_switch(fh); +} + +static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a) +{ + dprintk(2, "VIDIOC_G_AUDIO: %d\n", a->index); + if (a->index != 0) + return -EINVAL; + *a = msp3400_v4l2_audio; + return 0; +} + +static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_G_AUDIO: %d\n", a->index); + if (a->index != 0) + return -EINVAL; + if (av7110->current_input >= 2) + return -EINVAL; + *a = msp3400_v4l2_audio; + return 0; +} + +static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_S_AUDIO: %d\n", a->index); + if (av7110->current_input >= 2) + return -EINVAL; + return a->index ? -EINVAL : 0; +} + +static int vidioc_g_sliced_vbi_cap(struct file *file, void *fh, + struct v4l2_sliced_vbi_cap *cap) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_G_SLICED_VBI_CAP\n"); + if (cap->type != V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) + return -EINVAL; + if (FW_VERSION(av7110->arm_app) >= 0x2623) { + cap->service_set = V4L2_SLICED_WSS_625; + cap->service_lines[0][23] = V4L2_SLICED_WSS_625; + } + return 0; +} + +static int vidioc_g_fmt_sliced_vbi_out(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_G_FMT:\n"); + if (FW_VERSION(av7110->arm_app) < 0x2623) + return -EINVAL; + memset(&f->fmt.sliced, 0, sizeof f->fmt.sliced); + if (av7110->wssMode) { + f->fmt.sliced.service_set = V4L2_SLICED_WSS_625; + f->fmt.sliced.service_lines[0][23] = V4L2_SLICED_WSS_625; + f->fmt.sliced.io_size = sizeof(struct v4l2_sliced_vbi_data); + } + return 0; +} + +static int vidioc_s_fmt_sliced_vbi_out(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; + + dprintk(2, "VIDIOC_S_FMT\n"); + if (FW_VERSION(av7110->arm_app) < 0x2623) + return -EINVAL; + if (f->fmt.sliced.service_set != V4L2_SLICED_WSS_625 && + f->fmt.sliced.service_lines[0][23] != V4L2_SLICED_WSS_625) { + memset(&f->fmt.sliced, 0, sizeof(f->fmt.sliced)); + /* WSS controlled by firmware */ + av7110->wssMode = 0; + av7110->wssData = 0; + return av7110_fw_cmd(av7110, COMTYPE_ENCODER, + SetWSSConfig, 1, 0); + } else { + memset(&f->fmt.sliced, 0, sizeof(f->fmt.sliced)); + f->fmt.sliced.service_set = V4L2_SLICED_WSS_625; + f->fmt.sliced.service_lines[0][23] = V4L2_SLICED_WSS_625; + f->fmt.sliced.io_size = sizeof(struct v4l2_sliced_vbi_data); + /* WSS controlled by userspace */ + av7110->wssMode = 1; + av7110->wssData = 0; + } + return 0; +} + +static int av7110_vbi_reset(struct file *file) +{ + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct av7110 *av7110 = (struct av7110*) dev->ext_priv; + + dprintk(2, "%s\n", __func__); + av7110->wssMode = 0; + av7110->wssData = 0; + if (FW_VERSION(av7110->arm_app) < 0x2623) + return 0; + else + return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 1, 0); +} + +static ssize_t av7110_vbi_write(struct file *file, const char __user *data, size_t count, loff_t *ppos) +{ + struct saa7146_fh *fh = file->private_data; + struct saa7146_dev *dev = fh->dev; + struct av7110 *av7110 = (struct av7110*) dev->ext_priv; + struct v4l2_sliced_vbi_data d; + int rc; + + dprintk(2, "%s\n", __func__); + if (FW_VERSION(av7110->arm_app) < 0x2623 || !av7110->wssMode || count != sizeof d) + return -EINVAL; + if (copy_from_user(&d, data, count)) + return -EFAULT; + if ((d.id != 0 && d.id != V4L2_SLICED_WSS_625) || d.field != 0 || d.line != 23) + return -EINVAL; + if (d.id) + av7110->wssData = ((d.data[1] << 8) & 0x3f00) | d.data[0]; + else + av7110->wssData = 0x8000; + rc = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 1, av7110->wssData); + return (rc < 0) ? rc : count; +} + +/**************************************************************************** + * INITIALIZATION + ****************************************************************************/ + +static u8 saa7113_init_regs[] = { + 0x02, 0xd0, + 0x03, 0x23, + 0x04, 0x00, + 0x05, 0x00, + 0x06, 0xe9, + 0x07, 0x0d, + 0x08, 0x98, + 0x09, 0x02, + 0x0a, 0x80, + 0x0b, 0x40, + 0x0c, 0x40, + 0x0d, 0x00, + 0x0e, 0x01, + 0x0f, 0x7c, + 0x10, 0x48, + 0x11, 0x0c, + 0x12, 0x8b, + 0x13, 0x1a, + 0x14, 0x00, + 0x15, 0x00, + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1b, 0x00, + 0x1c, 0x00, + 0x1d, 0x00, + 0x1e, 0x00, + + 0x41, 0x77, + 0x42, 0x77, + 0x43, 0x77, + 0x44, 0x77, + 0x45, 0x77, + 0x46, 0x77, + 0x47, 0x77, + 0x48, 0x77, + 0x49, 0x77, + 0x4a, 0x77, + 0x4b, 0x77, + 0x4c, 0x77, + 0x4d, 0x77, + 0x4e, 0x77, + 0x4f, 0x77, + 0x50, 0x77, + 0x51, 0x77, + 0x52, 0x77, + 0x53, 0x77, + 0x54, 0x77, + 0x55, 0x77, + 0x56, 0x77, + 0x57, 0xff, + + 0xff +}; + + +static struct saa7146_ext_vv av7110_vv_data_st; +static struct saa7146_ext_vv av7110_vv_data_c; + +int av7110_init_analog_module(struct av7110 *av7110) +{ + u16 version1, version2; + + if (i2c_writereg(av7110, 0x80, 0x0, 0x80) == 1 && + i2c_writereg(av7110, 0x80, 0x0, 0) == 1) { + pr_info("DVB-C analog module @ card %d detected, initializing MSP3400\n", + av7110->dvb_adapter.num); + av7110->adac_type = DVB_ADAC_MSP34x0; + } else if (i2c_writereg(av7110, 0x84, 0x0, 0x80) == 1 && + i2c_writereg(av7110, 0x84, 0x0, 0) == 1) { + pr_info("DVB-C analog module @ card %d detected, initializing MSP3415\n", + av7110->dvb_adapter.num); + av7110->adac_type = DVB_ADAC_MSP34x5; + } else + return -ENODEV; + + msleep(100); // the probing above resets the msp... + msp_readreg(av7110, MSP_RD_DSP, 0x001e, &version1); + msp_readreg(av7110, MSP_RD_DSP, 0x001f, &version2); + dprintk(1, "dvb-ttpci: @ card %d MSP34xx version 0x%04x 0x%04x\n", + av7110->dvb_adapter.num, version1, version2); + msp_writereg(av7110, MSP_WR_DSP, 0x0013, 0x0c00); + msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x7f00); // loudspeaker + headphone + msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220); // loudspeaker source + msp_writereg(av7110, MSP_WR_DSP, 0x0009, 0x0220); // headphone source + msp_writereg(av7110, MSP_WR_DSP, 0x0004, 0x7f00); // loudspeaker volume + msp_writereg(av7110, MSP_WR_DSP, 0x000a, 0x0220); // SCART 1 source + msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0x7f00); // SCART 1 volume + msp_writereg(av7110, MSP_WR_DSP, 0x000d, 0x1900); // prescale SCART + + if (i2c_writereg(av7110, 0x48, 0x01, 0x00)!=1) { + pr_info("saa7113 not accessible\n"); + } else { + u8 *i = saa7113_init_regs; + + if ((av7110->dev->pci->subsystem_vendor == 0x110a) && (av7110->dev->pci->subsystem_device == 0x0000)) { + /* Fujitsu/Siemens DVB-Cable */ + av7110->analog_tuner_flags |= ANALOG_TUNER_VES1820; + } else if ((av7110->dev->pci->subsystem_vendor == 0x13c2) && (av7110->dev->pci->subsystem_device == 0x0002)) { + /* Hauppauge/TT DVB-C premium */ + av7110->analog_tuner_flags |= ANALOG_TUNER_VES1820; + } else if ((av7110->dev->pci->subsystem_vendor == 0x13c2) && (av7110->dev->pci->subsystem_device == 0x000A)) { + /* Hauppauge/TT DVB-C premium */ + av7110->analog_tuner_flags |= ANALOG_TUNER_STV0297; + } + + /* setup for DVB by default */ + if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) { + if (ves1820_writereg(av7110->dev, 0x09, 0x0f, 0x20)) + dprintk(1, "setting band in demodulator failed\n"); + } else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) { + saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD) + saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF) + } + + /* init the saa7113 */ + while (*i != 0xff) { + if (i2c_writereg(av7110, 0x48, i[0], i[1]) != 1) { + dprintk(1, "saa7113 initialization failed @ card %d", av7110->dvb_adapter.num); + break; + } + i += 2; + } + /* setup msp for analog sound: B/G Dual-FM */ + msp_writereg(av7110, MSP_WR_DEM, 0x00bb, 0x02d0); // AD_CV + msp_writereg(av7110, MSP_WR_DEM, 0x0001, 3); // FIR1 + msp_writereg(av7110, MSP_WR_DEM, 0x0001, 18); // FIR1 + msp_writereg(av7110, MSP_WR_DEM, 0x0001, 27); // FIR1 + msp_writereg(av7110, MSP_WR_DEM, 0x0001, 48); // FIR1 + msp_writereg(av7110, MSP_WR_DEM, 0x0001, 66); // FIR1 + msp_writereg(av7110, MSP_WR_DEM, 0x0001, 72); // FIR1 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 4); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 64); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 0); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 3); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 18); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 27); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 48); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 66); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0005, 72); // FIR2 + msp_writereg(av7110, MSP_WR_DEM, 0x0083, 0xa000); // MODE_REG + msp_writereg(av7110, MSP_WR_DEM, 0x0093, 0x00aa); // DCO1_LO 5.74MHz + msp_writereg(av7110, MSP_WR_DEM, 0x009b, 0x04fc); // DCO1_HI + msp_writereg(av7110, MSP_WR_DEM, 0x00a3, 0x038e); // DCO2_LO 5.5MHz + msp_writereg(av7110, MSP_WR_DEM, 0x00ab, 0x04c6); // DCO2_HI + msp_writereg(av7110, MSP_WR_DEM, 0x0056, 0); // LOAD_REG 1/2 + } + + memcpy(standard, dvb_standard, sizeof(struct saa7146_standard) * 2); + /* set dd1 stream a & b */ + saa7146_write(av7110->dev, DD1_STREAM_B, 0x00000000); + saa7146_write(av7110->dev, DD1_INIT, 0x03000700); + saa7146_write(av7110->dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + return 0; +} + +int av7110_init_v4l(struct av7110 *av7110) +{ + struct saa7146_dev* dev = av7110->dev; + struct saa7146_ext_vv *vv_data; + int ret; + + /* special case DVB-C: these cards have an analog tuner + plus need some special handling, so we have separate + saa7146_ext_vv data for these... */ + if (av7110->analog_tuner_flags) + vv_data = &av7110_vv_data_c; + else + vv_data = &av7110_vv_data_st; + ret = saa7146_vv_init(dev, vv_data); + + if (ret) { + ERR("cannot init capture device. skipping\n"); + return -ENODEV; + } + vv_data->vid_ops.vidioc_enum_input = vidioc_enum_input; + vv_data->vid_ops.vidioc_g_input = vidioc_g_input; + vv_data->vid_ops.vidioc_s_input = vidioc_s_input; + vv_data->vid_ops.vidioc_g_tuner = vidioc_g_tuner; + vv_data->vid_ops.vidioc_s_tuner = vidioc_s_tuner; + vv_data->vid_ops.vidioc_g_frequency = vidioc_g_frequency; + vv_data->vid_ops.vidioc_s_frequency = vidioc_s_frequency; + vv_data->vid_ops.vidioc_enumaudio = vidioc_enumaudio; + vv_data->vid_ops.vidioc_g_audio = vidioc_g_audio; + vv_data->vid_ops.vidioc_s_audio = vidioc_s_audio; + vv_data->vid_ops.vidioc_g_fmt_vbi_cap = NULL; + + vv_data->vbi_ops.vidioc_g_tuner = vidioc_g_tuner; + vv_data->vbi_ops.vidioc_s_tuner = vidioc_s_tuner; + vv_data->vbi_ops.vidioc_g_frequency = vidioc_g_frequency; + vv_data->vbi_ops.vidioc_s_frequency = vidioc_s_frequency; + vv_data->vbi_ops.vidioc_g_fmt_vbi_cap = NULL; + vv_data->vbi_ops.vidioc_g_sliced_vbi_cap = vidioc_g_sliced_vbi_cap; + vv_data->vbi_ops.vidioc_g_fmt_sliced_vbi_out = vidioc_g_fmt_sliced_vbi_out; + vv_data->vbi_ops.vidioc_s_fmt_sliced_vbi_out = vidioc_s_fmt_sliced_vbi_out; + + if (FW_VERSION(av7110->arm_app) < 0x2623) + vv_data->capabilities &= ~V4L2_CAP_SLICED_VBI_OUTPUT; + + if (saa7146_register_device(&av7110->v4l_dev, dev, "av7110", VFL_TYPE_GRABBER)) { + ERR("cannot register capture device. skipping\n"); + saa7146_vv_release(dev); + return -ENODEV; + } + if (FW_VERSION(av7110->arm_app) >= 0x2623) { + if (saa7146_register_device(&av7110->vbi_dev, dev, "av7110", VFL_TYPE_VBI)) + ERR("cannot register vbi v4l2 device. skipping\n"); + } + return 0; +} + +int av7110_exit_v4l(struct av7110 *av7110) +{ + struct saa7146_dev* dev = av7110->dev; + + saa7146_unregister_device(&av7110->v4l_dev, av7110->dev); + saa7146_unregister_device(&av7110->vbi_dev, av7110->dev); + + saa7146_vv_release(dev); + + return 0; +} + + + +/* FIXME: these values are experimental values that look better than the + values from the latest "official" driver -- at least for me... (MiHu) */ +static struct saa7146_standard standard[] = { + { + .name = "PAL", .id = V4L2_STD_PAL_BG, + .v_offset = 0x15, .v_field = 288, + .h_offset = 0x48, .h_pixels = 708, + .v_max_out = 576, .h_max_out = 768, + }, { + .name = "NTSC", .id = V4L2_STD_NTSC, + .v_offset = 0x10, .v_field = 244, + .h_offset = 0x40, .h_pixels = 708, + .v_max_out = 480, .h_max_out = 640, + } +}; + +static struct saa7146_standard analog_standard[] = { + { + .name = "PAL", .id = V4L2_STD_PAL_BG, + .v_offset = 0x1b, .v_field = 288, + .h_offset = 0x08, .h_pixels = 708, + .v_max_out = 576, .h_max_out = 768, + }, { + .name = "NTSC", .id = V4L2_STD_NTSC, + .v_offset = 0x10, .v_field = 244, + .h_offset = 0x40, .h_pixels = 708, + .v_max_out = 480, .h_max_out = 640, + } +}; + +static struct saa7146_standard dvb_standard[] = { + { + .name = "PAL", .id = V4L2_STD_PAL_BG, + .v_offset = 0x14, .v_field = 288, + .h_offset = 0x48, .h_pixels = 708, + .v_max_out = 576, .h_max_out = 768, + }, { + .name = "NTSC", .id = V4L2_STD_NTSC, + .v_offset = 0x10, .v_field = 244, + .h_offset = 0x40, .h_pixels = 708, + .v_max_out = 480, .h_max_out = 640, + } +}; + +static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) +{ + struct av7110 *av7110 = (struct av7110*) dev->ext_priv; + + if (std->id & V4L2_STD_PAL) { + av7110->vidmode = AV7110_VIDEO_MODE_PAL; + av7110_set_vidmode(av7110, av7110->vidmode); + } + else if (std->id & V4L2_STD_NTSC) { + av7110->vidmode = AV7110_VIDEO_MODE_NTSC; + av7110_set_vidmode(av7110, av7110->vidmode); + } + else + return -1; + + return 0; +} + + +static struct saa7146_ext_vv av7110_vv_data_st = { + .inputs = 1, + .audios = 1, + .capabilities = V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_AUDIO, + .flags = 0, + + .stds = &standard[0], + .num_stds = ARRAY_SIZE(standard), + .std_callback = &std_callback, + + .vbi_fops.open = av7110_vbi_reset, + .vbi_fops.release = av7110_vbi_reset, + .vbi_fops.write = av7110_vbi_write, +}; + +static struct saa7146_ext_vv av7110_vv_data_c = { + .inputs = 1, + .audios = 1, + .capabilities = V4L2_CAP_TUNER | V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_AUDIO, + .flags = SAA7146_USE_PORT_B_FOR_VBI, + + .stds = &standard[0], + .num_stds = ARRAY_SIZE(standard), + .std_callback = &std_callback, + + .vbi_fops.open = av7110_vbi_reset, + .vbi_fops.release = av7110_vbi_reset, + .vbi_fops.write = av7110_vbi_write, +}; + diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c new file mode 100644 index 00000000..1f8b1bb0 --- /dev/null +++ b/drivers/media/pci/ttpci/budget-av.c @@ -0,0 +1,1640 @@ +/* + * budget-av.c: driver for the SAA7146 based Budget DVB cards + * with analog video in + * + * Compiled from various sources by Michael Hunold + * + * CI interface support (c) 2004 Olivier Gournet & + * Andrew de Quincey + * + * Copyright (C) 2002 Ralph Metzler + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "budget.h" +#include "stv0299.h" +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" +#include "tda8261.h" +#include "tda8261_cfg.h" +#include "tda1002x.h" +#include "tda1004x.h" +#include "tua6100.h" +#include "dvb-pll.h" +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_ca_en50221.h" + +#define DEBICICAM 0x02420000 + +#define SLOTSTATUS_NONE 1 +#define SLOTSTATUS_PRESENT 2 +#define SLOTSTATUS_RESET 4 +#define SLOTSTATUS_READY 8 +#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct budget_av { + struct budget budget; + struct video_device *vd; + int cur_input; + int has_saa7113; + struct tasklet_struct ciintf_irq_tasklet; + int slot_status; + struct dvb_ca_en50221 ca; + u8 reinitialise_demod:1; +}; + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot); + + +/* GPIO Connections: + * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! + * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory + * 2 - CI Card Enable (Active Low) + * 3 - CI Card Detect + */ + +/**************************************************************************** + * INITIALIZATION + ****************************************************************************/ + +static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg) +{ + u8 mm1[] = { 0x00 }; + u8 mm2[] = { 0x00 }; + struct i2c_msg msgs[2]; + + msgs[0].flags = 0; + msgs[1].flags = I2C_M_RD; + msgs[0].addr = msgs[1].addr = id / 2; + mm1[0] = reg; + msgs[0].len = 1; + msgs[1].len = 1; + msgs[0].buf = mm1; + msgs[1].buf = mm2; + + i2c_transfer(i2c, msgs, 2); + + return mm2[0]; +} + +static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len) +{ + u8 mm1[] = { reg }; + struct i2c_msg msgs[2] = { + {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1}, + {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len} + }; + + if (i2c_transfer(i2c, msgs, 2) != 2) + return -EIO; + + return 0; +} + +static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val) +{ + u8 msg[2] = { reg, val }; + struct i2c_msg msgs; + + msgs.flags = 0; + msgs.addr = id / 2; + msgs.len = 2; + msgs.buf = msg; + return i2c_transfer(i2c, &msgs, 1); +} + +static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); + udelay(1); + + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 1\n"); + } + return result; +} + +static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); + udelay(1); + + result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 2\n"); + } + return result; +} + +static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + udelay(1); + + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 3\n"); + return -ETIMEDOUT; + } + return result; +} + +static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + udelay(1); + + result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 5\n"); + } + return result; +} + +static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_reset\n"); + budget_av->slot_status = SLOTSTATUS_RESET; + + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ + msleep(2); + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */ + msleep(20); /* 20 ms Vcc settling time */ + + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */ + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + msleep(20); + + /* reinitialise the frontend if necessary */ + if (budget_av->reinitialise_demod) + dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); + + return 0; +} + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_shutdown\n"); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + budget_av->slot_status = SLOTSTATUS_NONE; + + return 0; +} + +static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); + + return 0; +} + +static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + int result; + + if (slot != 0) + return -EINVAL; + + /* test the card detect line - needs to be done carefully + * since it never goes high for some CAMs on this interface (e.g. topuptv) */ + if (budget_av->slot_status == SLOTSTATUS_NONE) { + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + udelay(1); + if (saa7146_read(saa, PSR) & MASK_06) { + if (budget_av->slot_status == SLOTSTATUS_NONE) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + pr_info("cam inserted A\n"); + } + } + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + } + + /* We also try and read from IO memory to work round the above detection bug. If + * there is no CAM, we will get a timeout. Only done if there is no cam + * present, since this test actually breaks some cams :( + * + * if the CI interface is not open, we also do the above test since we + * don't care if the cam has problems - we'll be resetting it on open() anyway */ + if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) { + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1); + if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + pr_info("cam inserted B\n"); + } else if (result < 0) { + if (budget_av->slot_status != SLOTSTATUS_NONE) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 5\n"); + return 0; + } + } + } + + /* read from attribute memory in reset/ready state to know when the CAM is ready */ + if (budget_av->slot_status == SLOTSTATUS_RESET) { + result = ciintf_read_attribute_mem(ca, slot, 0); + if (result == 0x1d) { + budget_av->slot_status = SLOTSTATUS_READY; + } + } + + /* work out correct return code */ + if (budget_av->slot_status != SLOTSTATUS_NONE) { + if (budget_av->slot_status & SLOTSTATUS_READY) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } + return DVB_CA_EN50221_POLL_CAM_PRESENT; + } + return 0; +} + +static int ciintf_init(struct budget_av *budget_av) +{ + struct saa7146_dev *saa = budget_av->budget.dev; + int result; + + memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221)); + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + + /* Enable DEBI pins */ + saa7146_write(saa, MC1, MASK_27 | MASK_11); + + /* register CI interface */ + budget_av->ca.owner = THIS_MODULE; + budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem; + budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem; + budget_av->ca.read_cam_control = ciintf_read_cam_control; + budget_av->ca.write_cam_control = ciintf_write_cam_control; + budget_av->ca.slot_reset = ciintf_slot_reset; + budget_av->ca.slot_shutdown = ciintf_slot_shutdown; + budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable; + budget_av->ca.poll_slot_status = ciintf_poll_slot_status; + budget_av->ca.data = budget_av; + budget_av->budget.ci_present = 1; + budget_av->slot_status = SLOTSTATUS_NONE; + + if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter, + &budget_av->ca, 0, 1)) != 0) { + pr_err("ci initialisation failed\n"); + goto error; + } + + pr_info("ci interface initialised\n"); + return 0; + +error: + saa7146_write(saa, MC1, MASK_27); + return result; +} + +static void ciintf_deinit(struct budget_av *budget_av) +{ + struct saa7146_dev *saa = budget_av->budget.dev; + + saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + + /* release the CA device */ + dvb_ca_en50221_release(&budget_av->ca); + + /* disable DEBI pins */ + saa7146_write(saa, MC1, MASK_27); +} + + +static const u8 saa7113_tab[] = { + 0x01, 0x08, + 0x02, 0xc0, + 0x03, 0x33, + 0x04, 0x00, + 0x05, 0x00, + 0x06, 0xeb, + 0x07, 0xe0, + 0x08, 0x28, + 0x09, 0x00, + 0x0a, 0x80, + 0x0b, 0x47, + 0x0c, 0x40, + 0x0d, 0x00, + 0x0e, 0x01, + 0x0f, 0x44, + + 0x10, 0x08, + 0x11, 0x0c, + 0x12, 0x7b, + 0x13, 0x00, + 0x15, 0x00, 0x16, 0x00, 0x17, 0x00, + + 0x57, 0xff, + 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07, + 0x5b, 0x83, 0x5e, 0x00, + 0xff +}; + +static int saa7113_init(struct budget_av *budget_av) +{ + struct budget *budget = &budget_av->budget; + struct saa7146_dev *saa = budget->dev; + const u8 *data = saa7113_tab; + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); + msleep(200); + + if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) { + dprintk(1, "saa7113 not found on KNC card\n"); + return -ENODEV; + } + + dprintk(1, "saa7113 detected and initializing\n"); + + while (*data != 0xff) { + i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1)); + data += 2; + } + + dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f)); + + return 0; +} + +static int saa7113_setinput(struct budget_av *budget_av, int input) +{ + struct budget *budget = &budget_av->budget; + + if (1 != budget_av->has_saa7113) + return -ENODEV; + + if (input == 1) { + i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7); + i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80); + } else if (input == 0) { + i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0); + i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00); + } else + return -EINVAL; + + budget_av->cur_input = input; + return 0; +} + + +static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + u8 m1; + + aclk = 0xb5; + if (srate < 2000000) + bclk = 0x86; + else if (srate < 5000000) + bclk = 0x89; + else if (srate < 15000000) + bclk = 0x8f; + else if (srate < 45000000) + bclk = 0x95; + + m1 = 0x14; + if (srate < 4000000) + m1 = 0x10; + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + stv0299_writereg(fe, 0x0f, 0x80 | m1); + + return 0; +} + +static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 div; + u8 buf[4]; + struct budget *budget = (struct budget *) fe->dvb->priv; + struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; + + if ((c->frequency < 950000) || (c->frequency > 2150000)) + return -EINVAL; + + div = (c->frequency + (125 - 1)) / 125; /* round correctly */ + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; + buf[3] = 0x20; + + if (c->symbol_rate < 4000000) + buf[3] |= 1; + + if (c->frequency < 1250000) + buf[3] |= 0; + else if (c->frequency < 1550000) + buf[3] |= 0x40; + else if (c->frequency < 2050000) + buf[3] |= 0x80; + else if (c->frequency < 2150000) + buf[3] |= 0xC0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static u8 typhoon_cinergy1200s_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x92, + 0xff, 0xff +}; + +static struct stv0299_config typhoon_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + + +static struct stv0299_config cinergy_1200s_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + +static struct stv0299_config cinergy_1200s_1894_0010_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + +static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = (struct budget *) fe->dvb->priv; + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (c->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (c->frequency < 150000000 ? 0x01 : + c->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static struct tda1002x_config philips_cu1216_config = { + .demod_address = 0x0c, + .invert = 1, +}; + +static struct tda1002x_config philips_cu1216_config_altaddress = { + .demod_address = 0x0d, + .invert = 0, +}; + +static struct tda10023_config philips_cu1216_tda10023_config = { + .demod_address = 0x0c, + .invert = 1, +}; + +static int philips_tu1216_tuner_init(struct dvb_frontend *fe) +{ + struct budget *budget = (struct budget *) fe->dvb->priv; + static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; + struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; + + // setup PLL configuration + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + msleep(1); + + return 0; +} + +static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = (struct budget *) fe->dvb->priv; + u8 tuner_buf[4]; + struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len = + sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = c->frequency + 36166000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) + cp = 3; + else if (tuner_frequency < 160000000) + cp = 5; + else if (tuner_frequency < 200000000) + cp = 6; + else if (tuner_frequency < 290000000) + cp = 3; + else if (tuner_frequency < 420000000) + cp = 5; + else if (tuner_frequency < 480000000) + cp = 6; + else if (tuner_frequency < 620000000) + cp = 3; + else if (tuner_frequency < 830000000) + cp = 5; + else if (tuner_frequency < 895000000) + cp = 7; + else + return -EINVAL; + + // determine band + if (c->frequency < 49000000) + return -EINVAL; + else if (c->frequency < 161000000) + band = 1; + else if (c->frequency < 444000000) + band = 2; + else if (c->frequency < 861000000) + band = 4; + else + return -EINVAL; + + // setup PLL filter + switch (c->bandwidth_hz) { + case 6000000: + filter = 0; + break; + + case 7000000: + filter = 0; + break; + + case 8000000: + filter = 1; + break; + + default: + return -EINVAL; + } + + // calculate divisor + // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) + tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; + + // setup tuner buffer + tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xca; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + return 0; +} + +static int philips_tu1216_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct budget *budget = (struct budget *) fe->dvb->priv; + + return request_firmware(fw, name, &budget->dev->pci->dev); +} + +static struct tda1004x_config philips_tu1216_config = { + + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 1, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tu1216_request_firmware, +}; + +static u8 philips_sd1878_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, + 0x05, 0x35, + 0x06, 0x40, + 0x07, 0x00, + 0x08, 0x43, + 0x09, 0x02, + 0x0C, 0x51, + 0x0D, 0x82, + 0x0E, 0x23, + 0x10, 0x3f, + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, + 0x16, 0x19, + 0x17, 0x8c, + 0x18, 0x59, + 0x19, 0xf8, + 0x1a, 0xfe, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x09, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x93, + 0xff, 0xff +}; + +static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + u8 m1; + + aclk = 0xb5; + if (srate < 2000000) + bclk = 0x86; + else if (srate < 5000000) + bclk = 0x89; + else if (srate < 15000000) + bclk = 0x8f; + else if (srate < 45000000) + bclk = 0x95; + + m1 = 0x14; + if (srate < 4000000) + m1 = 0x10; + + stv0299_writereg(fe, 0x0e, 0x23); + stv0299_writereg(fe, 0x0f, 0x94); + stv0299_writereg(fe, 0x10, 0x39); + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x15, 0xc9); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + stv0299_writereg(fe, 0x0f, 0x80 | m1); + + return 0; +} + +static struct stv0299_config philips_sd1878_config = { + .demod_address = 0x68, + .inittab = philips_sd1878_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_sd1878_ci_set_symbol_rate, +}; + +/* KNC1 DVB-S (STB0899) Inittab */ +static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = { + + { STB0899_DEV_ID , 0x81 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x8c }, + { STB0899_DISF22RX , 0x9a }, + { STB0899_SYSREG , 0x0b }, + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0x30 }, + { STB0899_IRQSTATUS_2 , 0x00 }, + { STB0899_IRQSTATUS_1 , 0x00 }, + { STB0899_IRQSTATUS_0 , 0x00 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x58 }, /* Repeater=8, Stop=disabled */ + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x20 }, + { STB0899_IOPVALUE3 , 0xc9 }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x40 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x08 }, /* 0x1c */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x00 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x41 }, + { STB0899_AGC1REF , 0x08 }, + { STB0899_RTC , 0x7a }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x33 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xee }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xdd }, + { STB0899_LDT2 , 0xc9 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfb }, + { STB0899_QDCCOMP , 0x03 }, + { STB0899_POWERI , 0x3b }, + { STB0899_POWERQ , 0x3d }, + { STB0899_RCOMP , 0x81 }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x04 }, + { STB0899_AGC2I2 , 0xf5 }, + { STB0899_TLIR , 0x25 }, + { STB0899_RTF , 0x80 }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xca }, + { STB0899_CFRM , 0xf1 }, + { STB0899_CFRL , 0xf3 }, + { STB0899_NIRM , 0x2a }, + { STB0899_NIRL , 0x05 }, + { STB0899_ISYMB , 0x17 }, + { STB0899_QSYMB , 0xfa }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0xfd }, + { STB0899_EQUAQ1 , 0x04 }, + { STB0899_EQUAI2 , 0x0f }, + { STB0899_EQUAQ2 , 0xff }, + { STB0899_EQUAI3 , 0xdf }, + { STB0899_EQUAQ3 , 0xfa }, + { STB0899_EQUAI4 , 0x37 }, + { STB0899_EQUAQ4 , 0x0d }, + { STB0899_EQUAI5 , 0xbd }, + { STB0899_EQUAQ5 , 0xf7 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0xff }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x00 }, + { STB0899_ECNT3L , 0x00 }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xf0 }, + { STB0899_VTH23 , 0xa0 }, + { STB0899_VTH34 , 0x78 }, + { STB0899_VTH56 , 0x4e }, + { STB0899_VTH67 , 0x48 }, + { STB0899_VTH78 , 0x38 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x40 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x0c }, + { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x00 }, + { STB0899_TSLLSTKL , 0x00 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0xab }, + { STB0899_PCKLENUL , 0x00 }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xcc }, + { STB0899_TSSTATUS , 0x80 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x96 }, + { STB0899_ERRCTRL3 , 0x89 }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x1f }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0x00 }, + { STB0899_MATSTRL , 0x00 }, + { STB0899_UPLSTRM , 0x00 }, + { STB0899_UPLSTRL , 0x00 }, + { STB0899_DFLSTRM , 0x00 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x00 }, + { STB0899_SYNCDSTRM , 0x00 }, + { STB0899_SYNCDSTRL , 0x00 }, + { STB0899_CFGPDELSTATUS1 , 0x10 }, + { STB0899_CFGPDELSTATUS2 , 0x00 }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x00 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +/* STB0899 demodulator config for the KNC1 and clones */ +static struct stb0899_config knc1_dvbs2_config = { + .init_dev = knc1_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = knc1_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .postproc = NULL, + + .demod_address = 0x68, +// .ts_output_mode = STB0899_OUT_PARALLEL, /* types = SERIAL/PARALLEL */ + .block_sync_mode = STB0899_SYNC_FORCED, /* DSS, SYNC_FORCED/UNSYNCED */ +// .ts_pfbit_toggle = STB0899_MPEG_NORMAL, /* DirecTV, MPEG toggling seq */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_OFF, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 90000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = tda8261_get_frequency, + .tuner_set_frequency = tda8261_set_frequency, + .tuner_set_bandwidth = NULL, + .tuner_get_bandwidth = tda8261_get_bandwidth, + .tuner_set_rfsiggain = NULL +}; + +/* + * SD1878/SHA tuner config + * 1F, Single I/P, Horizontal mount, High Sensitivity + */ +static const struct tda8261_config sd1878c_config = { +// .name = "SD1878/SHA", + .addr = 0x60, + .step_size = TDA8261_STEP_1000 /* kHz */ +}; + +static u8 read_pwm(struct budget_av *budget_av) +{ + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1}, + {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} + }; + + if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +#define SUBID_DVBS_KNC1 0x0010 +#define SUBID_DVBS_KNC1_PLUS 0x0011 +#define SUBID_DVBS_TYPHOON 0x4f56 +#define SUBID_DVBS_CINERGY1200 0x1154 +#define SUBID_DVBS_CYNERGY1200N 0x1155 +#define SUBID_DVBS_TV_STAR 0x0014 +#define SUBID_DVBS_TV_STAR_PLUS_X4 0x0015 +#define SUBID_DVBS_TV_STAR_CI 0x0016 +#define SUBID_DVBS2_KNC1 0x0018 +#define SUBID_DVBS2_KNC1_OEM 0x0019 +#define SUBID_DVBS_EASYWATCH_1 0x001a +#define SUBID_DVBS_EASYWATCH_2 0x001b +#define SUBID_DVBS2_EASYWATCH 0x001d +#define SUBID_DVBS_EASYWATCH 0x001e + +#define SUBID_DVBC_EASYWATCH 0x002a +#define SUBID_DVBC_EASYWATCH_MK3 0x002c +#define SUBID_DVBC_KNC1 0x0020 +#define SUBID_DVBC_KNC1_PLUS 0x0021 +#define SUBID_DVBC_KNC1_MK3 0x0022 +#define SUBID_DVBC_KNC1_TDA10024 0x0028 +#define SUBID_DVBC_KNC1_PLUS_MK3 0x0023 +#define SUBID_DVBC_CINERGY1200 0x1156 +#define SUBID_DVBC_CINERGY1200_MK3 0x1176 + +#define SUBID_DVBT_EASYWATCH 0x003a +#define SUBID_DVBT_KNC1_PLUS 0x0031 +#define SUBID_DVBT_KNC1 0x0030 +#define SUBID_DVBT_CINERGY1200 0x1157 + +static void frontend_init(struct budget_av *budget_av) +{ + struct saa7146_dev * saa = budget_av->budget.dev; + struct dvb_frontend * fe = NULL; + + /* Enable / PowerON Frontend */ + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + + /* Wait for PowerON */ + msleep(100); + + /* additional setup necessary for the PLUS cards */ + switch (saa->pci->subsystem_device) { + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBC_KNC1_PLUS: + case SUBID_DVBT_KNC1_PLUS: + case SUBID_DVBC_EASYWATCH: + case SUBID_DVBC_KNC1_PLUS_MK3: + case SUBID_DVBS2_KNC1: + case SUBID_DVBS2_KNC1_OEM: + case SUBID_DVBS2_EASYWATCH: + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI); + break; + } + + switch (saa->pci->subsystem_device) { + + case SUBID_DVBS_KNC1: + /* + * maybe that setting is needed for other dvb-s cards as well, + * but so far it has been only confirmed for this type + */ + budget_av->reinitialise_demod = 1; + /* fall through */ + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBS_EASYWATCH_1: + if (saa->pci->subsystem_vendor == 0x1894) { + fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config, + &budget_av->budget.i2c_adap); + if (fe) { + dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap); + } + } else { + fe = dvb_attach(stv0299_attach, &typhoon_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + } + break; + + case SUBID_DVBS_TV_STAR: + case SUBID_DVBS_TV_STAR_PLUS_X4: + case SUBID_DVBS_TV_STAR_CI: + case SUBID_DVBS_CYNERGY1200N: + case SUBID_DVBS_EASYWATCH: + case SUBID_DVBS_EASYWATCH_2: + fe = dvb_attach(stv0299_attach, &philips_sd1878_config, + &budget_av->budget.i2c_adap); + if (fe) { + dvb_attach(dvb_pll_attach, fe, 0x60, + &budget_av->budget.i2c_adap, + DVB_PLL_PHILIPS_SD1878_TDA8261); + } + break; + + case SUBID_DVBS_TYPHOON: + fe = dvb_attach(stv0299_attach, &typhoon_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + break; + case SUBID_DVBS2_KNC1: + case SUBID_DVBS2_KNC1_OEM: + case SUBID_DVBS2_EASYWATCH: + budget_av->reinitialise_demod = 1; + if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap))) + dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap); + + break; + case SUBID_DVBS_CINERGY1200: + fe = dvb_attach(stv0299_attach, &cinergy_1200s_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + break; + + case SUBID_DVBC_KNC1: + case SUBID_DVBC_KNC1_PLUS: + case SUBID_DVBC_CINERGY1200: + case SUBID_DVBC_EASYWATCH: + budget_av->reinitialise_demod = 1; + budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; + fe = dvb_attach(tda10021_attach, &philips_cu1216_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe == NULL) + fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe) { + fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; + } + break; + + case SUBID_DVBC_EASYWATCH_MK3: + case SUBID_DVBC_CINERGY1200_MK3: + case SUBID_DVBC_KNC1_MK3: + case SUBID_DVBC_KNC1_TDA10024: + case SUBID_DVBC_KNC1_PLUS_MK3: + budget_av->reinitialise_demod = 1; + budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; + fe = dvb_attach(tda10023_attach, + &philips_cu1216_tda10023_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe) { + fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; + } + break; + + case SUBID_DVBT_EASYWATCH: + case SUBID_DVBT_KNC1: + case SUBID_DVBT_KNC1_PLUS: + case SUBID_DVBT_CINERGY1200: + budget_av->reinitialise_demod = 1; + fe = dvb_attach(tda10046_attach, &philips_tu1216_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.init = philips_tu1216_tuner_init; + fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params; + } + break; + } + + if (fe == NULL) { + pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + saa->pci->vendor, + saa->pci->device, + saa->pci->subsystem_vendor, + saa->pci->subsystem_device); + return; + } + + budget_av->budget.dvb_frontend = fe; + + if (dvb_register_frontend(&budget_av->budget.dvb_adapter, + budget_av->budget.dvb_frontend)) { + pr_err("Frontend registration failed!\n"); + dvb_frontend_detach(budget_av->budget.dvb_frontend); + budget_av->budget.dvb_frontend = NULL; + } +} + + +static void budget_av_irq(struct saa7146_dev *dev, u32 * isr) +{ + struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; + + dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av); + + if (*isr & MASK_10) + ttpci_budget_irq10_handler(dev, isr); +} + +static int budget_av_detach(struct saa7146_dev *dev) +{ + struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; + int err; + + dprintk(2, "dev: %p\n", dev); + + if (1 == budget_av->has_saa7113) { + saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO); + + msleep(200); + + saa7146_unregister_device(&budget_av->vd, dev); + + saa7146_vv_release(dev); + } + + if (budget_av->budget.ci_present) + ciintf_deinit(budget_av); + + if (budget_av->budget.dvb_frontend != NULL) { + dvb_unregister_frontend(budget_av->budget.dvb_frontend); + dvb_frontend_detach(budget_av->budget.dvb_frontend); + } + err = ttpci_budget_deinit(&budget_av->budget); + + kfree(budget_av); + + return err; +} + +#define KNC1_INPUTS 2 +static struct v4l2_input knc1_inputs[KNC1_INPUTS] = { + { 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, + V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD }, + { 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, + V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD }, +}; + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index); + if (i->index >= KNC1_INPUTS) + return -EINVAL; + memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input)); + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct budget_av *budget_av = (struct budget_av *)dev->ext_priv; + + *i = budget_av->cur_input; + + dprintk(1, "VIDIOC_G_INPUT %d\n", *i); + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct budget_av *budget_av = (struct budget_av *)dev->ext_priv; + + dprintk(1, "VIDIOC_S_INPUT %d\n", input); + return saa7113_setinput(budget_av, input); +} + +static struct saa7146_ext_vv vv_data; + +static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct budget_av *budget_av; + u8 *mac; + int err; + + dprintk(2, "dev: %p\n", dev); + + if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL))) + return -ENOMEM; + + budget_av->has_saa7113 = 0; + budget_av->budget.ci_present = 0; + + dev->ext_priv = budget_av; + + err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE, + adapter_nr); + if (err) { + kfree(budget_av); + return err; + } + + /* knc1 initialization */ + saa7146_write(dev, DD1_STREAM_B, 0x04000000); + saa7146_write(dev, DD1_INIT, 0x07000600); + saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26); + + if (saa7113_init(budget_av) == 0) { + budget_av->has_saa7113 = 1; + err = saa7146_vv_init(dev, &vv_data); + if (err != 0) { + /* fixme: proper cleanup here */ + ERR("cannot init vv subsystem\n"); + return err; + } + vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; + vv_data.vid_ops.vidioc_g_input = vidioc_g_input; + vv_data.vid_ops.vidioc_s_input = vidioc_s_input; + + if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) { + /* fixme: proper cleanup here */ + ERR("cannot register capture v4l2 device\n"); + saa7146_vv_release(dev); + return err; + } + + /* beware: this modifies dev->vv ... */ + saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A, + SAA7146_HPS_SYNC_PORT_A); + + saa7113_setinput(budget_av, 0); + } + + /* fixme: find some sane values here... */ + saa7146_write(dev, PCI_BT_V1, 0x1c00101f); + + mac = budget_av->budget.dvb_adapter.proposed_mac; + if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) { + pr_err("KNC1-%d: Could not read MAC from KNC1 card\n", + budget_av->budget.dvb_adapter.num); + memset(mac, 0, 6); + } else { + pr_info("KNC1-%d: MAC addr = %pM\n", + budget_av->budget.dvb_adapter.num, mac); + } + + budget_av->budget.dvb_adapter.priv = budget_av; + frontend_init(budget_av); + ciintf_init(budget_av); + + ttpci_budget_init_hooks(&budget_av->budget); + + return 0; +} + +static struct saa7146_standard standard[] = { + {.name = "PAL",.id = V4L2_STD_PAL, + .v_offset = 0x17,.v_field = 288, + .h_offset = 0x14,.h_pixels = 680, + .v_max_out = 576,.h_max_out = 768 }, + + {.name = "NTSC",.id = V4L2_STD_NTSC, + .v_offset = 0x16,.v_field = 240, + .h_offset = 0x06,.h_pixels = 708, + .v_max_out = 480,.h_max_out = 640, }, +}; + +static struct saa7146_ext_vv vv_data = { + .inputs = 2, + .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113 + .flags = 0, + .stds = &standard[0], + .num_stds = ARRAY_SIZE(standard), +}; + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S); +MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2); +MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2); +MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C); +MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T); +MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S); +MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S); +MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP); +MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3); +MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T); +MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP); +MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP); +MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP); +MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3); +MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024); +MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3); +MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP); +MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); +MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); +MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C); +MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3); +MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T); + +static struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56), + MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010), + MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010), + MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011), + MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011), + MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014), + MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015), + MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016), + MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018), + MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019), + MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d), + MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e), + MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a), + MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b), + MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a), + MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c), + MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a), + MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020), + MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021), + MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022), + MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028), + MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023), + MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030), + MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031), + MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154), + MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155), + MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156), + MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176), + MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157), + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_extension budget_extension = { + .name = "budget_av", + .flags = SAA7146_USE_I2C_IRQ, + + .pci_tbl = pci_tbl, + + .module = THIS_MODULE, + .attach = budget_av_attach, + .detach = budget_av_detach, + + .irq_mask = MASK_10, + .irq_func = budget_av_irq, +}; + +static int __init budget_av_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_av_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +module_init(budget_av_init); +module_exit(budget_av_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called " + "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)"); diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c new file mode 100644 index 00000000..98e52417 --- /dev/null +++ b/drivers/media/pci/ttpci/budget-ci.c @@ -0,0 +1,1591 @@ +/* + * budget-ci.c: driver for the SAA7146 based Budget DVB cards + * + * Compiled from various sources by Michael Hunold + * + * msp430 IR support contributed by Jack Thomasson + * partially based on the Siemens DVB driver by Ralph+Marcus Metzler + * + * CI interface support (c) 2004 Andrew de Quincey + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + +#include +#include +#include +#include +#include +#include + +#include "budget.h" + +#include "dvb_ca_en50221.h" +#include "stv0299.h" +#include "stv0297.h" +#include "tda1004x.h" +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" +#include "stb6100.h" +#include "stb6100_cfg.h" +#include "lnbp21.h" +#include "bsbe1.h" +#include "bsru6.h" +#include "tda1002x.h" +#include "tda827x.h" +#include "bsbe1-d01a.h" + +#define MODULE_NAME "budget_ci" + +/* + * Regarding DEBIADDR_IR: + * Some CI modules hang if random addresses are read. + * Using address 0x4000 for the IR read means that we + * use the same address as for CI version, which should + * be a safe default. + */ +#define DEBIADDR_IR 0x4000 +#define DEBIADDR_CICONTROL 0x0000 +#define DEBIADDR_CIVERSION 0x4000 +#define DEBIADDR_IO 0x1000 +#define DEBIADDR_ATTR 0x3000 + +#define CICONTROL_RESET 0x01 +#define CICONTROL_ENABLETS 0x02 +#define CICONTROL_CAMDETECT 0x08 + +#define DEBICICTL 0x00420000 +#define DEBICICAM 0x02420000 + +#define SLOTSTATUS_NONE 1 +#define SLOTSTATUS_PRESENT 2 +#define SLOTSTATUS_RESET 4 +#define SLOTSTATUS_READY 8 +#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) + +/* RC5 device wildcard */ +#define IR_DEVICE_ANY 255 + +static int rc5_device = -1; +module_param(rc5_device, int, 0644); +MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)"); + +static int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct budget_ci_ir { + struct rc_dev *dev; + struct tasklet_struct msp430_irq_tasklet; + char name[72]; /* 40 + 32 for (struct saa7146_dev).name */ + char phys[32]; + int rc5_device; + u32 ir_key; + bool have_command; + bool full_rc5; /* Outputs a full RC5 code */ +}; + +struct budget_ci { + struct budget budget; + struct tasklet_struct ciintf_irq_tasklet; + int slot_status; + int ci_irq; + struct dvb_ca_en50221 ca; + struct budget_ci_ir ir; + u8 tuner_pll_address; /* used for philips_tdm1316l configs */ +}; + +static void msp430_ir_interrupt(unsigned long data) +{ + struct budget_ci *budget_ci = (struct budget_ci *) data; + struct rc_dev *dev = budget_ci->ir.dev; + u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; + + /* + * The msp430 chip can generate two different bytes, command and device + * + * type1: X1CCCCCC, C = command bits (0 - 63) + * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit + * + * Each signal from the remote control can generate one or more command + * bytes and one or more device bytes. For the repeated bytes, the + * highest bit (X) is set. The first command byte is always generated + * before the first device byte. Other than that, no specific order + * seems to apply. To make life interesting, bytes can also be lost. + * + * Only when we have a command and device byte, a keypress is + * generated. + */ + + if (ir_debug) + printk("budget_ci: received byte 0x%02x\n", command); + + /* Remove repeat bit, we use every command */ + command = command & 0x7f; + + /* Is this a RC5 command byte? */ + if (command & 0x40) { + budget_ci->ir.have_command = true; + budget_ci->ir.ir_key = command & 0x3f; + return; + } + + /* It's a RC5 device byte */ + if (!budget_ci->ir.have_command) + return; + budget_ci->ir.have_command = false; + + if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && + budget_ci->ir.rc5_device != (command & 0x1f)) + return; + + if (budget_ci->ir.full_rc5) { + rc_keydown(dev, + budget_ci->ir.rc5_device <<8 | budget_ci->ir.ir_key, + (command & 0x20) ? 1 : 0); + return; + } + + /* FIXME: We should generate complete scancodes for all devices */ + rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0); +} + +static int msp430_ir_init(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + struct rc_dev *dev; + int error; + + dev = rc_allocate_device(); + if (!dev) { + printk(KERN_ERR "budget_ci: IR interface initialisation failed\n"); + return -ENOMEM; + } + + snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name), + "Budget-CI dvb ir receiver %s", saa->name); + snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys), + "pci-%s/ir0", pci_name(saa->pci)); + + dev->driver_name = MODULE_NAME; + dev->input_name = budget_ci->ir.name; + dev->input_phys = budget_ci->ir.phys; + dev->input_id.bustype = BUS_PCI; + dev->input_id.version = 1; + if (saa->pci->subsystem_vendor) { + dev->input_id.vendor = saa->pci->subsystem_vendor; + dev->input_id.product = saa->pci->subsystem_device; + } else { + dev->input_id.vendor = saa->pci->vendor; + dev->input_id.product = saa->pci->device; + } + dev->dev.parent = &saa->pci->dev; + + if (rc5_device < 0) + budget_ci->ir.rc5_device = IR_DEVICE_ANY; + else + budget_ci->ir.rc5_device = rc5_device; + + /* Select keymap and address */ + switch (budget_ci->budget.dev->pci->subsystem_device) { + case 0x100c: + case 0x100f: + case 0x1011: + case 0x1012: + /* The hauppauge keymap is a superset of these remotes */ + dev->map_name = RC_MAP_HAUPPAUGE; + budget_ci->ir.full_rc5 = true; + + if (rc5_device < 0) + budget_ci->ir.rc5_device = 0x1f; + break; + case 0x1010: + case 0x1017: + case 0x1019: + case 0x101a: + case 0x101b: + /* for the Technotrend 1500 bundled remote */ + dev->map_name = RC_MAP_TT_1500; + break; + default: + /* unknown remote */ + dev->map_name = RC_MAP_BUDGET_CI_OLD; + break; + } + if (!budget_ci->ir.full_rc5) + dev->scanmask = 0xff; + + error = rc_register_device(dev); + if (error) { + printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error); + rc_free_device(dev); + return error; + } + + budget_ci->ir.dev = dev; + + tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt, + (unsigned long) budget_ci); + + SAA7146_IER_ENABLE(saa, MASK_06); + saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); + + return 0; +} + +static void msp430_ir_deinit(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + + SAA7146_IER_DISABLE(saa, MASK_06); + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + tasklet_kill(&budget_ci->ir.msp430_irq_tasklet); + + rc_unregister_device(budget_ci->ir.dev); +} + +static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, + DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0); +} + +static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, + DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0); +} + +static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, + DEBIADDR_IO | (address & 3), 1, 1, 0); +} + +static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, + DEBIADDR_IO | (address & 3), 1, value, 1, 0); +} + +static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + + if (slot != 0) + return -EINVAL; + + if (budget_ci->ci_irq) { + // trigger on RISING edge during reset so we know when READY is re-asserted + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + } + budget_ci->slot_status = SLOTSTATUS_RESET; + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); + msleep(1); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + return 0; +} + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + return 0; +} + +static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + int tmp; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); + + tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + tmp | CICONTROL_ENABLETS, 1, 0); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); + return 0; +} + +static void ciintf_interrupt(unsigned long data) +{ + struct budget_ci *budget_ci = (struct budget_ci *) data; + struct saa7146_dev *saa = budget_ci->budget.dev; + unsigned int flags; + + // ensure we don't get spurious IRQs during initialisation + if (!budget_ci->budget.ci_present) + return; + + // read the CAM status + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + if (flags & CICONTROL_CAMDETECT) { + + // GPIO should be set to trigger on falling edge if a CAM is present + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); + + if (budget_ci->slot_status & SLOTSTATUS_NONE) { + // CAM insertion IRQ + budget_ci->slot_status = SLOTSTATUS_PRESENT; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + + } else if (budget_ci->slot_status & SLOTSTATUS_RESET) { + // CAM ready (reset completed) + budget_ci->slot_status = SLOTSTATUS_READY; + dvb_ca_en50221_camready_irq(&budget_ci->ca, 0); + + } else if (budget_ci->slot_status & SLOTSTATUS_READY) { + // FR/DA IRQ + dvb_ca_en50221_frda_irq(&budget_ci->ca, 0); + } + } else { + + // trigger on rising edge if a CAM is not present - when a CAM is inserted, we + // only want to get the IRQ when it sets READY. If we trigger on the falling edge, + // the CAM might not actually be ready yet. + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + + // generate a CAM removal IRQ if we haven't already + if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) { + // CAM removal IRQ + budget_ci->slot_status = SLOTSTATUS_NONE; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + } +} + +static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + unsigned int flags; + + // ensure we don't get spurious IRQs during initialisation + if (!budget_ci->budget.ci_present) + return -EINVAL; + + // read the CAM status + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + if (flags & CICONTROL_CAMDETECT) { + // mark it as present if it wasn't before + if (budget_ci->slot_status & SLOTSTATUS_NONE) { + budget_ci->slot_status = SLOTSTATUS_PRESENT; + } + + // during a RESET, we check if we can read from IO memory to see when CAM is ready + if (budget_ci->slot_status & SLOTSTATUS_RESET) { + if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) { + budget_ci->slot_status = SLOTSTATUS_READY; + } + } + } else { + budget_ci->slot_status = SLOTSTATUS_NONE; + } + + if (budget_ci->slot_status != SLOTSTATUS_NONE) { + if (budget_ci->slot_status & SLOTSTATUS_READY) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } + return DVB_CA_EN50221_POLL_CAM_PRESENT; + } + + return 0; +} + +static int ciintf_init(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + int flags; + int result; + int ci_version; + int ca_flags; + + memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221)); + + // enable DEBI pins + saa7146_write(saa, MC1, MASK_27 | MASK_11); + + // test if it is there + ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0); + if ((ci_version & 0xa0) != 0xa0) { + result = -ENODEV; + goto error; + } + + // determine whether a CAM is present or not + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + budget_ci->slot_status = SLOTSTATUS_NONE; + if (flags & CICONTROL_CAMDETECT) + budget_ci->slot_status = SLOTSTATUS_PRESENT; + + // version 0xa2 of the CI firmware doesn't generate interrupts + if (ci_version == 0xa2) { + ca_flags = 0; + budget_ci->ci_irq = 0; + } else { + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | + DVB_CA_EN50221_FLAG_IRQ_FR | + DVB_CA_EN50221_FLAG_IRQ_DA; + budget_ci->ci_irq = 1; + } + + // register CI interface + budget_ci->ca.owner = THIS_MODULE; + budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem; + budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem; + budget_ci->ca.read_cam_control = ciintf_read_cam_control; + budget_ci->ca.write_cam_control = ciintf_write_cam_control; + budget_ci->ca.slot_reset = ciintf_slot_reset; + budget_ci->ca.slot_shutdown = ciintf_slot_shutdown; + budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable; + budget_ci->ca.poll_slot_status = ciintf_poll_slot_status; + budget_ci->ca.data = budget_ci; + if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter, + &budget_ci->ca, + ca_flags, 1)) != 0) { + printk("budget_ci: CI interface detected, but initialisation failed.\n"); + goto error; + } + + // Setup CI slot IRQ + if (budget_ci->ci_irq) { + tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci); + if (budget_ci->slot_status != SLOTSTATUS_NONE) { + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); + } else { + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + } + SAA7146_IER_ENABLE(saa, MASK_03); + } + + // enable interface + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + // success! + printk("budget_ci: CI interface initialised\n"); + budget_ci->budget.ci_present = 1; + + // forge a fake CI IRQ so the CAM state is setup correctly + if (budget_ci->ci_irq) { + flags = DVB_CA_EN50221_CAMCHANGE_REMOVED; + if (budget_ci->slot_status != SLOTSTATUS_NONE) + flags = DVB_CA_EN50221_CAMCHANGE_INSERTED; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags); + } + + return 0; + +error: + saa7146_write(saa, MC1, MASK_27); + return result; +} + +static void ciintf_deinit(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + + // disable CI interrupts + if (budget_ci->ci_irq) { + SAA7146_IER_DISABLE(saa, MASK_03); + saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); + tasklet_kill(&budget_ci->ciintf_irq_tasklet); + } + + // reset interface + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); + msleep(1); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + // disable TS data stream to CI interface + saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); + + // release the CA device + dvb_ca_en50221_release(&budget_ci->ca); + + // disable DEBI pins + saa7146_write(saa, MC1, MASK_27); +} + +static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr) +{ + struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; + + dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci); + + if (*isr & MASK_06) + tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet); + + if (*isr & MASK_10) + ttpci_budget_irq10_handler(dev, isr); + + if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq)) + tasklet_schedule(&budget_ci->ciintf_irq_tasklet); +} + +static u8 philips_su1278_tt_inittab[] = { + 0x01, 0x0f, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x5b, + 0x05, 0x85, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x02, + 0x09, 0x00, + 0x0C, 0x01, + 0x0D, 0x81, + 0x0E, 0x44, + 0x0f, 0x14, + 0x10, 0x3c, + 0x11, 0x84, + 0x12, 0xda, + 0x13, 0x97, + 0x14, 0x95, + 0x15, 0xc9, + 0x16, 0x19, + 0x17, 0x8c, + 0x18, 0x59, + 0x19, 0xf8, + 0x1a, 0xfe, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x09, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x93, + 0xff, 0xff +}; + +static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) +{ + stv0299_writereg(fe, 0x0e, 0x44); + if (srate >= 10000000) { + stv0299_writereg(fe, 0x13, 0x97); + stv0299_writereg(fe, 0x14, 0x95); + stv0299_writereg(fe, 0x15, 0xc9); + stv0299_writereg(fe, 0x17, 0x8c); + stv0299_writereg(fe, 0x1a, 0xfe); + stv0299_writereg(fe, 0x1c, 0x7f); + stv0299_writereg(fe, 0x2d, 0x09); + } else { + stv0299_writereg(fe, 0x13, 0x99); + stv0299_writereg(fe, 0x14, 0x8d); + stv0299_writereg(fe, 0x15, 0xce); + stv0299_writereg(fe, 0x17, 0x43); + stv0299_writereg(fe, 0x1a, 0x1d); + stv0299_writereg(fe, 0x1c, 0x12); + stv0299_writereg(fe, 0x2d, 0x05); + } + stv0299_writereg(fe, 0x0e, 0x23); + stv0299_writereg(fe, 0x0f, 0x94); + stv0299_writereg(fe, 0x10, 0x39); + stv0299_writereg(fe, 0x15, 0xc9); + + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + + return 0; +} + +static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + u32 div; + u8 buf[4]; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; + + if ((p->frequency < 950000) || (p->frequency > 2150000)) + return -EINVAL; + + div = (p->frequency + (500 - 1)) / 500; /* round correctly */ + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2; + buf[3] = 0x20; + + if (p->symbol_rate < 4000000) + buf[3] |= 1; + + if (p->frequency < 1250000) + buf[3] |= 0; + else if (p->frequency < 1550000) + buf[3] |= 0x40; + else if (p->frequency < 2050000) + buf[3] |= 0x80; + else if (p->frequency < 2150000) + buf[3] |= 0xC0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct stv0299_config philips_su1278_tt_config = { + + .demod_address = 0x68, + .inittab = philips_su1278_tt_inittab, + .mclk = 64000000UL, + .invert = 0, + .skip_reinit = 1, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 50, + .set_symbol_rate = philips_su1278_tt_set_symbol_rate, +}; + + + +static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe) +{ + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; + static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len = + sizeof(td1316_init) }; + + // setup PLL configuration + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + msleep(1); + + // disable the mc44BC374c (do not check for errors) + tuner_msg.addr = 0x65; + tuner_msg.buf = disable_mc44BC374c; + tuner_msg.len = sizeof(disable_mc44BC374c); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1); + } + + return 0; +} + +static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + u8 tuner_buf[4]; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = p->frequency + 36130000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) + cp = 3; + else if (tuner_frequency < 160000000) + cp = 5; + else if (tuner_frequency < 200000000) + cp = 6; + else if (tuner_frequency < 290000000) + cp = 3; + else if (tuner_frequency < 420000000) + cp = 5; + else if (tuner_frequency < 480000000) + cp = 6; + else if (tuner_frequency < 620000000) + cp = 3; + else if (tuner_frequency < 830000000) + cp = 5; + else if (tuner_frequency < 895000000) + cp = 7; + else + return -EINVAL; + + // determine band + if (p->frequency < 49000000) + return -EINVAL; + else if (p->frequency < 159000000) + band = 1; + else if (p->frequency < 444000000) + band = 2; + else if (p->frequency < 861000000) + band = 4; + else + return -EINVAL; + + // setup PLL filter and TDA9889 + switch (p->bandwidth_hz) { + case 6000000: + tda1004x_writereg(fe, 0x0C, 0x14); + filter = 0; + break; + + case 7000000: + tda1004x_writereg(fe, 0x0C, 0x80); + filter = 0; + break; + + case 8000000: + tda1004x_writereg(fe, 0x0C, 0x14); + filter = 1; + break; + + default: + return -EINVAL; + } + + // calculate divisor + // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) + tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; + + // setup tuner buffer + tuner_buf[0] = tuner_frequency >> 8; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xca; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + return 0; +} + +static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + + return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev); +} + +static struct tda1004x_config philips_tdm1316l_config = { + + .demod_address = 0x8, + .invert = 0, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tdm1316l_request_firmware, +}; + +static struct tda1004x_config philips_tdm1316l_config_invert = { + + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tdm1316l_request_firmware, +}; + +static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + u8 tuner_buf[5]; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, + .flags = 0, + .buf = tuner_buf, + .len = sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = p->frequency + 36125000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) { + cp = 3; + band = 1; + } else if (tuner_frequency < 160000000) { + cp = 5; + band = 1; + } else if (tuner_frequency < 200000000) { + cp = 6; + band = 1; + } else if (tuner_frequency < 290000000) { + cp = 3; + band = 2; + } else if (tuner_frequency < 420000000) { + cp = 5; + band = 2; + } else if (tuner_frequency < 480000000) { + cp = 6; + band = 2; + } else if (tuner_frequency < 620000000) { + cp = 3; + band = 4; + } else if (tuner_frequency < 830000000) { + cp = 5; + band = 4; + } else if (tuner_frequency < 895000000) { + cp = 7; + band = 4; + } else + return -EINVAL; + + // assume PLL filter should always be 8MHz for the moment. + filter = 1; + + // calculate divisor + tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500; + + // setup tuner buffer + tuner_buf[0] = tuner_frequency >> 8; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xc8; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + tuner_buf[4] = 0x80; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(50); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + + return 0; +} + +static u8 dvbc_philips_tdm1316l_inittab[] = { + 0x80, 0x01, + 0x80, 0x00, + 0x81, 0x01, + 0x81, 0x00, + 0x00, 0x09, + 0x01, 0x69, + 0x03, 0x00, + 0x04, 0x00, + 0x07, 0x00, + 0x08, 0x00, + 0x20, 0x00, + 0x21, 0x40, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x40, + 0x25, 0x88, + 0x30, 0xff, + 0x31, 0x00, + 0x32, 0xff, + 0x33, 0x00, + 0x34, 0x50, + 0x35, 0x7f, + 0x36, 0x00, + 0x37, 0x20, + 0x38, 0x00, + 0x40, 0x1c, + 0x41, 0xff, + 0x42, 0x29, + 0x43, 0x20, + 0x44, 0xff, + 0x45, 0x00, + 0x46, 0x00, + 0x49, 0x04, + 0x4a, 0x00, + 0x4b, 0x7b, + 0x52, 0x30, + 0x55, 0xae, + 0x56, 0x47, + 0x57, 0xe1, + 0x58, 0x3a, + 0x5a, 0x1e, + 0x5b, 0x34, + 0x60, 0x00, + 0x63, 0x00, + 0x64, 0x00, + 0x65, 0x00, + 0x66, 0x00, + 0x67, 0x00, + 0x68, 0x00, + 0x69, 0x00, + 0x6a, 0x02, + 0x6b, 0x00, + 0x70, 0xff, + 0x71, 0x00, + 0x72, 0x00, + 0x73, 0x00, + 0x74, 0x0c, + 0x80, 0x00, + 0x81, 0x00, + 0x82, 0x00, + 0x83, 0x00, + 0x84, 0x04, + 0x85, 0x80, + 0x86, 0x24, + 0x87, 0x78, + 0x88, 0x10, + 0x89, 0x00, + 0x90, 0x01, + 0x91, 0x01, + 0xa0, 0x04, + 0xa1, 0x00, + 0xa2, 0x00, + 0xb0, 0x91, + 0xb1, 0x0b, + 0xc0, 0x53, + 0xc1, 0x70, + 0xc2, 0x12, + 0xd0, 0x00, + 0xd1, 0x00, + 0xd2, 0x00, + 0xd3, 0x00, + 0xd4, 0x00, + 0xd5, 0x00, + 0xde, 0x00, + 0xdf, 0x00, + 0x61, 0x38, + 0x62, 0x0a, + 0x53, 0x13, + 0x59, 0x08, + 0xff, 0xff, +}; + +static struct stv0297_config dvbc_philips_tdm1316l_config = { + .demod_address = 0x1c, + .inittab = dvbc_philips_tdm1316l_inittab, + .invert = 0, + .stop_during_read = 1, +}; + +static struct tda10023_config tda10023_config = { + .demod_address = 0xc, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xa511, +}; + +static struct tda827x_config tda827x_config = { + .config = 0, +}; + +/* TT S2-3200 DVB-S (STB0899) Inittab */ +static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = { + + { STB0899_DEV_ID , 0x81 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x8c }, + { STB0899_DISF22RX , 0x9a }, + { STB0899_SYSREG , 0x0b }, + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0x30 }, + { STB0899_IRQSTATUS_2 , 0x00 }, + { STB0899_IRQSTATUS_1 , 0x00 }, + { STB0899_IRQSTATUS_0 , 0x00 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */ + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x20 }, + { STB0899_IOPVALUE3 , 0xc9 }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x40 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x00 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x41 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x7a }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xc7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xdd }, + { STB0899_LDT2 , 0xc9 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfb }, + { STB0899_QDCCOMP , 0x03 }, + { STB0899_POWERI , 0x3b }, + { STB0899_POWERQ , 0x3d }, + { STB0899_RCOMP , 0x81 }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x04 }, + { STB0899_AGC2I2 , 0xf5 }, + { STB0899_TLIR , 0x25 }, + { STB0899_RTF , 0x80 }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xca }, + { STB0899_CFRM , 0xf1 }, + { STB0899_CFRL , 0xf3 }, + { STB0899_NIRM , 0x2a }, + { STB0899_NIRL , 0x05 }, + { STB0899_ISYMB , 0x17 }, + { STB0899_QSYMB , 0xfa }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0xfd }, + { STB0899_EQUAQ1 , 0x04 }, + { STB0899_EQUAI2 , 0x0f }, + { STB0899_EQUAQ2 , 0xff }, + { STB0899_EQUAI3 , 0xdf }, + { STB0899_EQUAQ3 , 0xfa }, + { STB0899_EQUAI4 , 0x37 }, + { STB0899_EQUAQ4 , 0x0d }, + { STB0899_EQUAI5 , 0xbd }, + { STB0899_EQUAQ5 , 0xf7 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0xff }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x00 }, + { STB0899_ECNT3L , 0x00 }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xf0 }, + { STB0899_VTH23 , 0xa0 }, + { STB0899_VTH34 , 0x78 }, + { STB0899_VTH56 , 0x4e }, + { STB0899_VTH67 , 0x48 }, + { STB0899_VTH78 , 0x38 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x40 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x0c }, + { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x00 }, + { STB0899_TSLLSTKL , 0x00 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0xab }, + { STB0899_PCKLENUL , 0x00 }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xcc }, + { STB0899_TSSTATUS , 0x80 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x96 }, + { STB0899_ERRCTRL3 , 0x89 }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x1f }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0x00 }, + { STB0899_MATSTRL , 0x00 }, + { STB0899_UPLSTRM , 0x00 }, + { STB0899_UPLSTRL , 0x00 }, + { STB0899_DFLSTRM , 0x00 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x00 }, + { STB0899_SYNCDSTRM , 0x00 }, + { STB0899_SYNCDSTRL , 0x00 }, + { STB0899_CFGPDELSTATUS1 , 0x10 }, + { STB0899_CFGPDELSTATUS2 , 0x00 }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x00 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +static struct stb0899_config tt3200_config = { + .init_dev = tt3200_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = tt3200_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .postproc = NULL, + + .demod_address = 0x68, + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL +}; + +static struct stb6100_config tt3200_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static void frontend_init(struct budget_ci *budget_ci) +{ + switch (budget_ci->budget.dev->pci->subsystem_device) { + case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059)) + budget_ci->budget.dvb_frontend = + dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; + break; + } + break; + + case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059)) + budget_ci->budget.dvb_frontend = + dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params; + break; + } + break; + + case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt)) + budget_ci->tuner_pll_address = 0x61; + budget_ci->budget.dvb_frontend = + dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) + budget_ci->tuner_pll_address = 0x63; + budget_ci->budget.dvb_frontend = + dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt)) + budget_ci->tuner_pll_address = 0x60; + budget_ci->budget.dvb_frontend = + dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1017: // TT S-1500 PCI + budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; + budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; + + budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { + printk("%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */ + budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) { + printk(KERN_ERR "%s: No tda827x found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */ + budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) { + if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { + printk(KERN_ERR "%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } else { + printk(KERN_ERR "%s: No STB6000 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x1019: // TT S2-3200 PCI + /* + * NOTE! on some STB0899 versions, the internal PLL takes a longer time + * to settle, aka LOCK. On the older revisions of the chip, we don't see + * this, as a result on the newer chips the entire clock tree, will not + * be stable after a freshly POWER 'ed up situation. + * In this case, we should RESET the STB0899 (Active LOW) and wait for + * PLL stabilization. + * + * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is + * connected to the SAA7146 GPIO, GPIO2, Pin 142 + */ + /* Reset Demodulator */ + saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO); + /* Wait for everything to die */ + msleep(50); + /* Pull it up out of Reset state */ + saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI); + /* Wait for PLL to stabilize */ + msleep(250); + /* + * PLL state should be stable now. Ideally, we should check + * for PLL LOCK status. But well, never mind! + */ + budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) { + if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { + printk("%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } else { + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + } + + if (budget_ci->budget.dvb_frontend == NULL) { + printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + budget_ci->budget.dev->pci->vendor, + budget_ci->budget.dev->pci->device, + budget_ci->budget.dev->pci->subsystem_vendor, + budget_ci->budget.dev->pci->subsystem_device); + } else { + if (dvb_register_frontend + (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { + printk("budget-ci: Frontend registration failed!\n"); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } +} + +static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct budget_ci *budget_ci; + int err; + + budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL); + if (!budget_ci) { + err = -ENOMEM; + goto out1; + } + + dprintk(2, "budget_ci: %p\n", budget_ci); + + dev->ext_priv = budget_ci; + + err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, + adapter_nr); + if (err) + goto out2; + + err = msp430_ir_init(budget_ci); + if (err) + goto out3; + + ciintf_init(budget_ci); + + budget_ci->budget.dvb_adapter.priv = budget_ci; + frontend_init(budget_ci); + + ttpci_budget_init_hooks(&budget_ci->budget); + + return 0; + +out3: + ttpci_budget_deinit(&budget_ci->budget); +out2: + kfree(budget_ci); +out1: + return err; +} + +static int budget_ci_detach(struct saa7146_dev *dev) +{ + struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; + struct saa7146_dev *saa = budget_ci->budget.dev; + int err; + + if (budget_ci->budget.ci_present) + ciintf_deinit(budget_ci); + msp430_ir_deinit(budget_ci); + if (budget_ci->budget.dvb_frontend) { + dvb_unregister_frontend(budget_ci->budget.dvb_frontend); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + } + err = ttpci_budget_deinit(&budget_ci->budget); + + // disable frontend and CI interface + saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); + + kfree(budget_ci); + + return err; +} + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC); +MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT); + +static struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c), + MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f), + MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010), + MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011), + MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012), + MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), + MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a), + MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019), + MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b), + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_extension budget_extension = { + .name = "budget_ci dvb", + .flags = SAA7146_USE_I2C_IRQ, + + .module = THIS_MODULE, + .pci_tbl = &pci_tbl[0], + .attach = budget_ci_attach, + .detach = budget_ci_detach, + + .irq_mask = MASK_03 | MASK_06 | MASK_10, + .irq_func = budget_ci_irq, +}; + +static int __init budget_ci_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_ci_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +module_init(budget_ci_init); +module_exit(budget_ci_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called " + "budget PCI DVB cards w/ CI-module produced by " + "Siemens, Technotrend, Hauppauge"); diff --git a/drivers/media/pci/ttpci/budget-core.c b/drivers/media/pci/ttpci/budget-core.c new file mode 100644 index 00000000..37d02fe0 --- /dev/null +++ b/drivers/media/pci/ttpci/budget-core.c @@ -0,0 +1,602 @@ +/* + * budget-core.c: driver for the SAA7146 based Budget DVB cards + * + * Compiled from various sources by Michael Hunold + * + * Copyright (C) 2002 Ralph Metzler + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * 26feb2004 Support for FS Activy Card (Grundig tuner) by + * Michael Dreher , + * Oliver Endriss , + * Andreas 'randy' Weinberger + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + + +#include "budget.h" +#include "ttpci-eeprom.h" + +#define TS_WIDTH (2 * TS_SIZE) +#define TS_WIDTH_ACTIVY TS_SIZE +#define TS_WIDTH_DVBC TS_SIZE +#define TS_HEIGHT_MASK 0xf00 +#define TS_HEIGHT_MASK_ACTIVY 0xc00 +#define TS_HEIGHT_MASK_DVBC 0xe00 +#define TS_MIN_BUFSIZE_K 188 +#define TS_MAX_BUFSIZE_K 1410 +#define TS_MAX_BUFSIZE_K_ACTIVY 564 +#define TS_MAX_BUFSIZE_K_DVBC 1316 +#define BUFFER_WARNING_WAIT (30*HZ) + +int budget_debug; +static int dma_buffer_size = TS_MIN_BUFSIZE_K; +module_param_named(debug, budget_debug, int, 0644); +module_param_named(bufsize, dma_buffer_size, int, 0444); +MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off)."); +MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)"); + +/**************************************************************************** + * TT budget / WinTV Nova + ****************************************************************************/ + +static int stop_ts_capture(struct budget *budget) +{ + dprintk(2, "budget: %p\n", budget); + + saa7146_write(budget->dev, MC1, MASK_20); // DMA3 off + SAA7146_IER_DISABLE(budget->dev, MASK_10); + return 0; +} + +static int start_ts_capture(struct budget *budget) +{ + struct saa7146_dev *dev = budget->dev; + + dprintk(2, "budget: %p\n", budget); + + if (!budget->feeding || !budget->fe_synced) + return 0; + + saa7146_write(dev, MC1, MASK_20); // DMA3 off + + memset(budget->grabbing, 0x00, budget->buffer_size); + + saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000)); + + budget->ttbp = 0; + + /* + * Signal path on the Activy: + * + * tuner -> SAA7146 port A -> SAA7146 BRS -> SAA7146 DMA3 -> memory + * + * Since the tuner feeds 204 bytes packets into the SAA7146, + * DMA3 is configured to strip the trailing 16 FEC bytes: + * Pitch: 188, NumBytes3: 188, NumLines3: 1024 + */ + + switch(budget->card->type) { + case BUDGET_FS_ACTIVY: + saa7146_write(dev, DD1_INIT, 0x04000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25)); + saa7146_write(dev, BRS_CTRL, 0x00000000); + break; + case BUDGET_PATCH: + saa7146_write(dev, DD1_INIT, 0x00000200); + saa7146_write(dev, MC2, (MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x60000000); + break; + case BUDGET_CIN1200C_MK3: + case BUDGET_KNC1C_MK3: + case BUDGET_KNC1C_TDA10024: + case BUDGET_KNC1CP_MK3: + if (budget->video_port == BUDGET_VIDEO_PORTA) { + saa7146_write(dev, DD1_INIT, 0x06000200); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x00000000); + } else { + saa7146_write(dev, DD1_INIT, 0x00000600); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x60000000); + } + break; + default: + if (budget->video_port == BUDGET_VIDEO_PORTA) { + saa7146_write(dev, DD1_INIT, 0x06000200); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x00000000); + } else { + saa7146_write(dev, DD1_INIT, 0x02000600); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x60000000); + } + } + + saa7146_write(dev, MC2, (MASK_08 | MASK_24)); + mdelay(10); + + saa7146_write(dev, BASE_ODD3, 0); + if (budget->buffer_size > budget->buffer_height * budget->buffer_width) { + // using odd/even buffers + saa7146_write(dev, BASE_EVEN3, budget->buffer_height * budget->buffer_width); + } else { + // using a single buffer + saa7146_write(dev, BASE_EVEN3, 0); + } + saa7146_write(dev, PROT_ADDR3, budget->buffer_size); + saa7146_write(dev, BASE_PAGE3, budget->pt.dma | ME1 | 0x90); + + saa7146_write(dev, PITCH3, budget->buffer_width); + saa7146_write(dev, NUM_LINE_BYTE3, + (budget->buffer_height << 16) | budget->buffer_width); + + saa7146_write(dev, MC2, (MASK_04 | MASK_20)); + + SAA7146_ISR_CLEAR(budget->dev, MASK_10); /* VPE */ + SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ + saa7146_write(dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ + + return 0; +} + +static int budget_read_fe_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct budget *budget = (struct budget *) fe->dvb->priv; + int synced; + int ret; + + if (budget->read_fe_status) + ret = budget->read_fe_status(fe, status); + else + ret = -EINVAL; + + if (!ret) { + synced = (*status & FE_HAS_LOCK); + if (synced != budget->fe_synced) { + budget->fe_synced = synced; + spin_lock(&budget->feedlock); + if (synced) + start_ts_capture(budget); + else + stop_ts_capture(budget); + spin_unlock(&budget->feedlock); + } + } + return ret; +} + +static void vpeirq(unsigned long data) +{ + struct budget *budget = (struct budget *) data; + u8 *mem = (u8 *) (budget->grabbing); + u32 olddma = budget->ttbp; + u32 newdma = saa7146_read(budget->dev, PCI_VDP3); + u32 count; + + /* Ensure streamed PCI data is synced to CPU */ + pci_dma_sync_sg_for_cpu(budget->dev->pci, budget->pt.slist, budget->pt.nents, PCI_DMA_FROMDEVICE); + + /* nearest lower position divisible by 188 */ + newdma -= newdma % 188; + + if (newdma >= budget->buffer_size) + return; + + budget->ttbp = newdma; + + if (budget->feeding == 0 || newdma == olddma) + return; + + if (newdma > olddma) { /* no wraparound, dump olddma..newdma */ + count = newdma - olddma; + dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); + } else { /* wraparound, dump olddma..buflen and 0..newdma */ + count = budget->buffer_size - olddma; + dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); + count += newdma; + dvb_dmx_swfilter_packets(&budget->demux, mem, newdma / 188); + } + + if (count > budget->buffer_warning_threshold) + budget->buffer_warnings++; + + if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) { + printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n", + budget->dev->name, __func__, budget->buffer_warnings, count); + budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT; + budget->buffer_warnings = 0; + } +} + + +int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count, + int uselocks, int nobusyloop) +{ + struct saa7146_dev *saa = budget->dev; + int result = 0; + unsigned long flags = 0; + + if (count > 4 || count <= 0) + return 0; + + if (uselocks) + spin_lock_irqsave(&budget->debilock, flags); + + if ((result = saa7146_wait_for_debi_done(saa, nobusyloop)) < 0) { + if (uselocks) + spin_unlock_irqrestore(&budget->debilock, flags); + return result; + } + + saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x10000 | (addr & 0xffff)); + saa7146_write(saa, DEBI_CONFIG, config); + saa7146_write(saa, DEBI_PAGE, 0); + saa7146_write(saa, MC2, (2 << 16) | 2); + + if ((result = saa7146_wait_for_debi_done(saa, nobusyloop)) < 0) { + if (uselocks) + spin_unlock_irqrestore(&budget->debilock, flags); + return result; + } + + result = saa7146_read(saa, DEBI_AD); + result &= (0xffffffffUL >> ((4 - count) * 8)); + + if (uselocks) + spin_unlock_irqrestore(&budget->debilock, flags); + + return result; +} + +int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, + int count, u32 value, int uselocks, int nobusyloop) +{ + struct saa7146_dev *saa = budget->dev; + unsigned long flags = 0; + int result; + + if (count > 4 || count <= 0) + return 0; + + if (uselocks) + spin_lock_irqsave(&budget->debilock, flags); + + if ((result = saa7146_wait_for_debi_done(saa, nobusyloop)) < 0) { + if (uselocks) + spin_unlock_irqrestore(&budget->debilock, flags); + return result; + } + + saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x00000 | (addr & 0xffff)); + saa7146_write(saa, DEBI_CONFIG, config); + saa7146_write(saa, DEBI_PAGE, 0); + saa7146_write(saa, DEBI_AD, value); + saa7146_write(saa, MC2, (2 << 16) | 2); + + if ((result = saa7146_wait_for_debi_done(saa, nobusyloop)) < 0) { + if (uselocks) + spin_unlock_irqrestore(&budget->debilock, flags); + return result; + } + + if (uselocks) + spin_unlock_irqrestore(&budget->debilock, flags); + return 0; +} + + +/**************************************************************************** + * DVB API SECTION + ****************************************************************************/ + +static int budget_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct budget *budget = (struct budget *) demux->priv; + int status = 0; + + dprintk(2, "budget: %p\n", budget); + + if (!demux->dmx.frontend) + return -EINVAL; + + spin_lock(&budget->feedlock); + feed->pusi_seen = 0; /* have a clean section start */ + if (budget->feeding++ == 0) + status = start_ts_capture(budget); + spin_unlock(&budget->feedlock); + return status; +} + +static int budget_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct budget *budget = (struct budget *) demux->priv; + int status = 0; + + dprintk(2, "budget: %p\n", budget); + + spin_lock(&budget->feedlock); + if (--budget->feeding == 0) + status = stop_ts_capture(budget); + spin_unlock(&budget->feedlock); + return status; +} + +static int budget_register(struct budget *budget) +{ + struct dvb_demux *dvbdemux = &budget->demux; + int ret; + + dprintk(2, "budget: %p\n", budget); + + dvbdemux->priv = (void *) budget; + + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = budget_start_feed; + dvbdemux->stop_feed = budget_stop_feed; + dvbdemux->write_to_decoder = NULL; + + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING); + + dvb_dmx_init(&budget->demux); + + budget->dmxdev.filternum = 256; + budget->dmxdev.demux = &dvbdemux->dmx; + budget->dmxdev.capabilities = 0; + + dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter); + + budget->hw_frontend.source = DMX_FRONTEND_0; + + ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->hw_frontend); + + if (ret < 0) + return ret; + + budget->mem_frontend.source = DMX_MEMORY_FE; + ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->mem_frontend); + if (ret < 0) + return ret; + + ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &budget->hw_frontend); + if (ret < 0) + return ret; + + dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx); + + return 0; +} + +static void budget_unregister(struct budget *budget) +{ + struct dvb_demux *dvbdemux = &budget->demux; + + dprintk(2, "budget: %p\n", budget); + + dvb_net_release(&budget->dvb_net); + + dvbdemux->dmx.close(&dvbdemux->dmx); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->hw_frontend); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->mem_frontend); + + dvb_dmxdev_release(&budget->dmxdev); + dvb_dmx_release(&budget->demux); +} + +int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, + struct saa7146_pci_extension_data *info, + struct module *owner, short *adapter_nums) +{ + int ret = 0; + struct budget_info *bi = info->ext_priv; + int max_bufsize; + int height_mask; + + memset(budget, 0, sizeof(struct budget)); + + dprintk(2, "dev: %p, budget: %p\n", dev, budget); + + budget->card = bi; + budget->dev = (struct saa7146_dev *) dev; + + switch(budget->card->type) { + case BUDGET_FS_ACTIVY: + budget->buffer_width = TS_WIDTH_ACTIVY; + max_bufsize = TS_MAX_BUFSIZE_K_ACTIVY; + height_mask = TS_HEIGHT_MASK_ACTIVY; + break; + + case BUDGET_KNC1C: + case BUDGET_KNC1CP: + case BUDGET_CIN1200C: + case BUDGET_KNC1C_MK3: + case BUDGET_KNC1C_TDA10024: + case BUDGET_KNC1CP_MK3: + case BUDGET_CIN1200C_MK3: + budget->buffer_width = TS_WIDTH_DVBC; + max_bufsize = TS_MAX_BUFSIZE_K_DVBC; + height_mask = TS_HEIGHT_MASK_DVBC; + break; + + default: + budget->buffer_width = TS_WIDTH; + max_bufsize = TS_MAX_BUFSIZE_K; + height_mask = TS_HEIGHT_MASK; + } + + if (dma_buffer_size < TS_MIN_BUFSIZE_K) + dma_buffer_size = TS_MIN_BUFSIZE_K; + else if (dma_buffer_size > max_bufsize) + dma_buffer_size = max_bufsize; + + budget->buffer_height = dma_buffer_size * 1024 / budget->buffer_width; + if (budget->buffer_height > 0xfff) { + budget->buffer_height /= 2; + budget->buffer_height &= height_mask; + budget->buffer_size = 2 * budget->buffer_height * budget->buffer_width; + } else { + budget->buffer_height &= height_mask; + budget->buffer_size = budget->buffer_height * budget->buffer_width; + } + budget->buffer_warning_threshold = budget->buffer_size * 80/100; + budget->buffer_warnings = 0; + budget->buffer_warning_time = jiffies; + + dprintk(2, "%s: buffer type = %s, width = %d, height = %d\n", + budget->dev->name, + budget->buffer_size > budget->buffer_width * budget->buffer_height ? "odd/even" : "single", + budget->buffer_width, budget->buffer_height); + printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); + + ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name, + owner, &budget->dev->pci->dev, adapter_nums); + if (ret < 0) + return ret; + + /* set dd1 stream a & b */ + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25)); + saa7146_write(dev, MC2, (MASK_10 | MASK_26)); + saa7146_write(dev, DD1_INIT, 0x02000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + if (bi->type != BUDGET_FS_ACTIVY) + budget->video_port = BUDGET_VIDEO_PORTB; + else + budget->video_port = BUDGET_VIDEO_PORTA; + spin_lock_init(&budget->feedlock); + spin_lock_init(&budget->debilock); + + /* the Siemens DVB needs this if you want to have the i2c chips + get recognized before the main driver is loaded */ + if (bi->type != BUDGET_FS_ACTIVY) + saa7146_write(dev, GPIO_CTRL, 0x500000); /* GPIO 3 = 1 */ + + strlcpy(budget->i2c_adap.name, budget->card->name, sizeof(budget->i2c_adap.name)); + + saa7146_i2c_adapter_prepare(dev, &budget->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120); + strcpy(budget->i2c_adap.name, budget->card->name); + + if (i2c_add_adapter(&budget->i2c_adap) < 0) { + ret = -ENOMEM; + goto err_dvb_unregister; + } + + ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac); + + budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt); + if (NULL == budget->grabbing) { + ret = -ENOMEM; + goto err_del_i2c; + } + + saa7146_write(dev, PCI_BT_V1, 0x001c0000); + /* upload all */ + saa7146_write(dev, GPIO_CTRL, 0x000000); + + tasklet_init(&budget->vpe_tasklet, vpeirq, (unsigned long) budget); + + /* frontend power on */ + if (bi->type != BUDGET_FS_ACTIVY) + saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); + + if ((ret = budget_register(budget)) == 0) + return 0; /* Everything OK */ + + /* An error occurred, cleanup resources */ + saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt); + +err_del_i2c: + i2c_del_adapter(&budget->i2c_adap); + +err_dvb_unregister: + dvb_unregister_adapter(&budget->dvb_adapter); + + return ret; +} + +void ttpci_budget_init_hooks(struct budget *budget) +{ + if (budget->dvb_frontend && !budget->read_fe_status) { + budget->read_fe_status = budget->dvb_frontend->ops.read_status; + budget->dvb_frontend->ops.read_status = budget_read_fe_status; + } +} + +int ttpci_budget_deinit(struct budget *budget) +{ + struct saa7146_dev *dev = budget->dev; + + dprintk(2, "budget: %p\n", budget); + + budget_unregister(budget); + + tasklet_kill(&budget->vpe_tasklet); + + saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt); + + i2c_del_adapter(&budget->i2c_adap); + + dvb_unregister_adapter(&budget->dvb_adapter); + + return 0; +} + +void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr) +{ + struct budget *budget = (struct budget *) dev->ext_priv; + + dprintk(8, "dev: %p, budget: %p\n", dev, budget); + + if (*isr & MASK_10) + tasklet_schedule(&budget->vpe_tasklet); +} + +void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port) +{ + struct budget *budget = (struct budget *) dev->ext_priv; + + spin_lock(&budget->feedlock); + budget->video_port = video_port; + if (budget->feeding) { + stop_ts_capture(budget); + start_ts_capture(budget); + } + spin_unlock(&budget->feedlock); +} + +EXPORT_SYMBOL_GPL(ttpci_budget_debiread); +EXPORT_SYMBOL_GPL(ttpci_budget_debiwrite); +EXPORT_SYMBOL_GPL(ttpci_budget_init); +EXPORT_SYMBOL_GPL(ttpci_budget_init_hooks); +EXPORT_SYMBOL_GPL(ttpci_budget_deinit); +EXPORT_SYMBOL_GPL(ttpci_budget_irq10_handler); +EXPORT_SYMBOL_GPL(ttpci_budget_set_video_port); +EXPORT_SYMBOL_GPL(budget_debug); + +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/ttpci/budget-patch.c b/drivers/media/pci/ttpci/budget-patch.c new file mode 100644 index 00000000..2cb35c23 --- /dev/null +++ b/drivers/media/pci/ttpci/budget-patch.c @@ -0,0 +1,680 @@ +/* + * budget-patch.c: driver for Budget Patch, + * hardware modification of DVB-S cards enabling full TS + * + * Written by Emard + * + * Original idea by Roberto Deza + * + * Special thanks to Holger Waechtler, Michael Hunold, Marian Durkovic + * and Metzlerbros + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + +#include "av7110.h" +#include "av7110_hw.h" +#include "budget.h" +#include "stv0299.h" +#include "ves1x93.h" +#include "tda8083.h" + +#include "bsru6.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define budget_patch budget + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH); +//MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC); + +static struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000), +// MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), + { + .vendor = 0, + } +}; + +/* those lines are for budget-patch to be tried +** on a true budget card and observe the +** behaviour of VSYNC generated by rps1. +** this code was shamelessly copy/pasted from budget.c +*/ +static void gpio_Set22K (struct budget *budget, int state) +{ + struct saa7146_dev *dev=budget->dev; + dprintk(2, "budget: %p\n", budget); + saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO)); +} + +/* Diseqc functions only for TT Budget card */ +/* taken from the Skyvision DVB driver by + Ralph Metzler */ + +static void DiseqcSendBit (struct budget *budget, int data) +{ + struct saa7146_dev *dev=budget->dev; + dprintk(2, "budget: %p\n", budget); + + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); + udelay(data ? 500 : 1000); + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + udelay(data ? 1000 : 500); +} + +static void DiseqcSendByte (struct budget *budget, int data) +{ + int i, par=1, d; + + dprintk(2, "budget: %p\n", budget); + + for (i=7; i>=0; i--) { + d = (data>>i)&1; + par ^= d; + DiseqcSendBit(budget, d); + } + + DiseqcSendBit(budget, par); +} + +static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst) +{ + struct saa7146_dev *dev=budget->dev; + int i; + + dprintk(2, "budget: %p\n", budget); + + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + mdelay(16); + + for (i=0; idvb->priv; + + switch (tone) { + case SEC_TONE_ON: + gpio_Set22K (budget, 1); + break; + + case SEC_TONE_OFF: + gpio_Set22K (budget, 0); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + + SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0); + + return 0; +} + +static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + + SendDiSEqCMsg (budget, 0, NULL, minicmd); + + return 0; +} + +static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length) +{ + int i; + + dprintk(2, "budget: %p\n", budget); + + for (i = 2; i < length; i++) + { + ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0); + msleep(5); + } + if (length) + ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0); + else + ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0); + msleep(5); + ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0); + msleep(5); + return 0; +} + +static void av7110_set22k(struct budget_patch *budget, int state) +{ + u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0}; + + dprintk(2, "budget: %p\n", budget); + budget_av7110_send_fw_cmd(budget, buf, 2); +} + +static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst) +{ + int i; + u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC), + 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + + dprintk(2, "budget: %p\n", budget); + + if (len>10) + len=10; + + buf[1] = len+2; + buf[2] = len; + + if (burst != -1) + buf[3]=burst ? 0x01 : 0x00; + else + buf[3]=0xffff; + + for (i=0; idvb->priv; + + switch (tone) { + case SEC_TONE_ON: + av7110_set22k (budget, 1); + break; + + case SEC_TONE_OFF: + av7110_set22k (budget, 0); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int budget_patch_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +{ + struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv; + + av7110_send_diseqc_msg (budget, cmd->msg_len, cmd->msg, 0); + + return 0; +} + +static int budget_patch_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv; + + av7110_send_diseqc_msg (budget, 0, NULL, minicmd); + + return 0; +} + +static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv; + u8 pwr = 0; + u8 buf[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + u32 div = (p->frequency + 479500) / 125; + + if (p->frequency > 2000000) + pwr = 3; + else if (p->frequency > 1800000) + pwr = 2; + else if (p->frequency > 1600000) + pwr = 1; + else if (p->frequency > 1200000) + pwr = 0; + else if (p->frequency >= 1100000) + pwr = 1; + else pwr = 2; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = ((div & 0x18000) >> 10) | 0x95; + buf[3] = (pwr << 6) | 0x30; + + // NOTE: since we're using a prescaler of 2, we set the + // divisor frequency to 62.5kHz and divide by 125 above + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct ves1x93_config alps_bsrv2_config = { + .demod_address = 0x08, + .xin = 90100000UL, + .invert_pwm = 0, +}; + +static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = p->frequency / 125; + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x8e; + data[3] = 0x00; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct tda8083_config grundig_29504_451_config = { + .demod_address = 0x68, +}; + +static void frontend_init(struct budget_patch* budget) +{ + switch(budget->dev->pci->subsystem_device) { + case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X + case 0x1013: // SATELCO Multimedia PCI + + // try the ALPS BSRV2 first of all + budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params; + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_patch_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_patch_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_patch_set_tone; + break; + } + + // try the ALPS BSRU6 now + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_set_tone; + break; + } + + // Try the grundig 29504-451 + budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params; + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_set_tone; + break; + } + break; + } + + if (budget->dvb_frontend == NULL) { + printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + budget->dev->pci->vendor, + budget->dev->pci->device, + budget->dev->pci->subsystem_vendor, + budget->dev->pci->subsystem_device); + } else { + if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) { + printk("budget-av: Frontend registration failed!\n"); + dvb_frontend_detach(budget->dvb_frontend); + budget->dvb_frontend = NULL; + } + } +} + +/* written by Emard */ +static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) +{ + struct budget_patch *budget; + int err; + int count = 0; + int detected = 0; + +#define PATCH_RESET 0 +#define RPS_IRQ 0 +#define HPS_SETUP 0 +#if PATCH_RESET + saa7146_write(dev, MC1, MASK_31); + msleep(40); +#endif +#if HPS_SETUP + // initialize registers. Better to have it like this + // than leaving something unconfigured + saa7146_write(dev, DD1_STREAM_B, 0); + // port B VSYNC at rising edge + saa7146_write(dev, DD1_INIT, 0x00000200); // have this in budget-core too! + saa7146_write(dev, BRS_CTRL, 0x00000000); // VBI + + // debi config + // saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18); + + // zero all HPS registers + saa7146_write(dev, HPS_H_PRESCALE, 0); // r68 + saa7146_write(dev, HPS_H_SCALE, 0); // r6c + saa7146_write(dev, BCS_CTRL, 0); // r70 + saa7146_write(dev, HPS_V_SCALE, 0); // r60 + saa7146_write(dev, HPS_V_GAIN, 0); // r64 + saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74 + saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78 + // Set HPS prescaler for port B input + saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) ); + saa7146_write(dev, MC2, + 0 * (MASK_08 | MASK_24) | // BRS control + 0 * (MASK_09 | MASK_25) | // a + 0 * (MASK_10 | MASK_26) | // b + 1 * (MASK_06 | MASK_22) | // HPS_CTRL1 + 1 * (MASK_05 | MASK_21) | // HPS_CTRL2 + 0 * (MASK_01 | MASK_15) // DEBI + ); +#endif + // Disable RPS1 and RPS0 + saa7146_write(dev, MC1, ( MASK_29 | MASK_28)); + // RPS1 timeout disable + saa7146_write(dev, RPS_TOV1, 0); + + // code for autodetection + // will wait for VBI_B event (vertical blank at port B) + // and will reset GPIO3 after VBI_B is detected. + // (GPIO3 should be raised high by CPU to + // test if GPIO3 will generate vertical blank signal + // in budget patch GPIO3 is connected to VSYNC_B + count = 0; +#if 0 + WRITE_RPS1(CMD_UPLOAD | + MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ); +#endif + WRITE_RPS1(CMD_PAUSE | EVT_VBI_B); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); +#if RPS_IRQ + // issue RPS1 interrupt to increment counter + WRITE_RPS1(CMD_INTERRUPT); + // at least a NOP is neede between two interrupts + WRITE_RPS1(CMD_NOP); + // interrupt again + WRITE_RPS1(CMD_INTERRUPT); +#endif + WRITE_RPS1(CMD_STOP); + +#if RPS_IRQ + // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) + // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled + // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called + saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); + // set event counter 1 threshold to maximum allowed value (rEC p55) + saa7146_write(dev, ECT1R, 0x3fff ); +#endif + // Fix VSYNC level + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + // Set RPS1 Address register to point to RPS code (r108 p42) + saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + // Enable RPS1, (rFC p33) + saa7146_write(dev, MC1, (MASK_13 | MASK_29 )); + + + mdelay(50); + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); + mdelay(150); + + + if( (saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0) + detected = 1; + +#if RPS_IRQ + printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff ); +#endif + // Disable RPS1 + saa7146_write(dev, MC1, ( MASK_29 )); + + if(detected == 0) + printk("budget-patch not detected or saa7146 in non-default state.\n" + "try enabling ressetting of 7146 with MASK_31 in MC1 register\n"); + + else + printk("BUDGET-PATCH DETECTED.\n"); + + +/* OLD (Original design by Roberto Deza): +** This code will setup the SAA7146_RPS1 to generate a square +** wave on GPIO3, changing when a field (TS_HEIGHT/2 "lines" of +** TS_WIDTH packets) has been acquired on SAA7146_D1B video port; +** then, this GPIO3 output which is connected to the D1B_VSYNC +** input, will trigger the acquisition of the alternate field +** and so on. +** Currently, the TT_budget / WinTV_Nova cards have two ICs +** (74HCT4040, LVC74) for the generation of this VSYNC signal, +** which seems that can be done perfectly without this :-)). +*/ + +/* New design (By Emard) +** this rps1 code will copy internal HS event to GPIO3 pin. +** GPIO3 is in budget-patch hardware connected to port B VSYNC + +** HS is an internal event of 7146, accessible with RPS +** and temporarily raised high every n lines +** (n in defined in the RPS_THRESH1 counter threshold) +** I think HS is raised high on the beginning of the n-th line +** and remains high until this n-th line that triggered +** it is completely received. When the reception of n-th line +** ends, HS is lowered. + +** To transmit data over DMA, 7146 needs changing state at +** port B VSYNC pin. Any changing of port B VSYNC will +** cause some DMA data transfer, with more or less packets loss. +** It depends on the phase and frequency of VSYNC and +** the way of 7146 is instructed to trigger on port B (defined +** in DD1_INIT register, 3rd nibble from the right valid +** numbers are 0-7, see datasheet) +** +** The correct triggering can minimize packet loss, +** dvbtraffic should give this stable bandwidths: +** 22k transponder = 33814 kbit/s +** 27.5k transponder = 38045 kbit/s +** by experiment it is found that the best results +** (stable bandwidths and almost no packet loss) +** are obtained using DD1_INIT triggering number 2 +** (Va at rising edge of VS Fa = HS x VS-failing forced toggle) +** and a VSYNC phase that occurs in the middle of DMA transfer +** (about byte 188*512=96256 in the DMA window). +** +** Phase of HS is still not clear to me how to control, +** It just happens to be so. It can be seen if one enables +** RPS_IRQ and print Event Counter 1 in vpeirq(). Every +** time RPS_INTERRUPT is called, the Event Counter 1 will +** increment. That's how the 7146 is programmed to do event +** counting in this budget-patch.c +** I *think* HPS setting has something to do with the phase +** of HS but I can't be 100% sure in that. + +** hardware debug note: a working budget card (including budget patch) +** with vpeirq() interrupt setup in mode "0x90" (every 64K) will +** generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes +** and that means 3*25=75 Hz of interrupt frequency, as seen by +** watch cat /proc/interrupts +** +** If this frequency is 3x lower (and data received in the DMA +** buffer don't start with 0x47, but in the middle of packets, +** whose lengths appear to be like 188 292 188 104 etc. +** this means VSYNC line is not connected in the hardware. +** (check soldering pcb and pins) +** The same behaviour of missing VSYNC can be duplicated on budget +** cards, by setting DD1_INIT trigger mode 7 in 3rd nibble. +*/ + + // Setup RPS1 "program" (p35) + count = 0; + + + // Wait Source Line Counter Threshold (p36) + WRITE_RPS1(CMD_PAUSE | EVT_HS); + // Set GPIO3=1 (p42) + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTHI<<24); +#if RPS_IRQ + // issue RPS1 interrupt + WRITE_RPS1(CMD_INTERRUPT); +#endif + // Wait reset Source Line Counter Threshold (p36) + WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS); + // Set GPIO3=0 (p42) + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); +#if RPS_IRQ + // issue RPS1 interrupt + WRITE_RPS1(CMD_INTERRUPT); +#endif + // Jump to begin of RPS program (p37) + WRITE_RPS1(CMD_JUMP); + WRITE_RPS1(dev->d_rps1.dma_handle); + + // Fix VSYNC level + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + // Set RPS1 Address register to point to RPS code (r108 p42) + saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + + if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL))) + return -ENOMEM; + + dprintk(2, "budget: %p\n", budget); + + err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); + if (err) { + kfree(budget); + return err; + } + + // Set Source Line Counter Threshold, using BRS (rCC p43) + // It generates HS event every TS_HEIGHT lines + // this is related to TS_WIDTH set in register + // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE + // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188 + //,then RPS_THRESH1 + // should be set to trigger every TS_HEIGHT (512) lines. + // + saa7146_write(dev, RPS_THRESH1, budget->buffer_height | MASK_12 ); + + // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 ); + // Enable RPS1 (rFC p33) + saa7146_write(dev, MC1, (MASK_13 | MASK_29)); + + + dev->ext_priv = budget; + + budget->dvb_adapter.priv = budget; + frontend_init(budget); + + ttpci_budget_init_hooks(budget); + + return 0; +} + +static int budget_patch_detach (struct saa7146_dev* dev) +{ + struct budget_patch *budget = (struct budget_patch*) dev->ext_priv; + int err; + + if (budget->dvb_frontend) { + dvb_unregister_frontend(budget->dvb_frontend); + dvb_frontend_detach(budget->dvb_frontend); + } + err = ttpci_budget_deinit (budget); + + kfree (budget); + + return err; +} + +static int __init budget_patch_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_patch_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +static struct saa7146_extension budget_extension = { + .name = "budget_patch dvb", + .flags = 0, + + .module = THIS_MODULE, + .pci_tbl = pci_tbl, + .attach = budget_patch_attach, + .detach = budget_patch_detach, + + .irq_mask = MASK_10, + .irq_func = ttpci_budget_irq10_handler, +}; + +module_init(budget_patch_init); +module_exit(budget_patch_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others"); +MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 " + "based so-called Budget Patch cards"); diff --git a/drivers/media/pci/ttpci/budget.c b/drivers/media/pci/ttpci/budget.c new file mode 100644 index 00000000..6ccc4883 --- /dev/null +++ b/drivers/media/pci/ttpci/budget.c @@ -0,0 +1,883 @@ +/* + * budget.c: driver for the SAA7146 based Budget DVB cards + * + * Compiled from various sources by Michael Hunold + * + * Copyright (C) 2002 Ralph Metzler + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * 26feb2004 Support for FS Activy Card (Grundig tuner) by + * Michael Dreher , + * Oliver Endriss and + * Andreas 'randy' Weinberger + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + +#include "budget.h" +#include "stv0299.h" +#include "ves1x93.h" +#include "ves1820.h" +#include "l64781.h" +#include "tda8083.h" +#include "s5h1420.h" +#include "tda10086.h" +#include "tda826x.h" +#include "lnbp21.h" +#include "bsru6.h" +#include "bsbe1.h" +#include "tdhd1.h" +#include "stv6110x.h" +#include "stv090x.h" +#include "isl6423.h" +#include "lnbh24.h" + + +static int diseqc_method; +module_param(diseqc_method, int, 0444); +MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static void Set22K (struct budget *budget, int state) +{ + struct saa7146_dev *dev=budget->dev; + dprintk(2, "budget: %p\n", budget); + saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO)); +} + +/* Diseqc functions only for TT Budget card */ +/* taken from the Skyvision DVB driver by + Ralph Metzler */ + +static void DiseqcSendBit (struct budget *budget, int data) +{ + struct saa7146_dev *dev=budget->dev; + dprintk(2, "budget: %p\n", budget); + + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); + udelay(data ? 500 : 1000); + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + udelay(data ? 1000 : 500); +} + +static void DiseqcSendByte (struct budget *budget, int data) +{ + int i, par=1, d; + + dprintk(2, "budget: %p\n", budget); + + for (i=7; i>=0; i--) { + d = (data>>i)&1; + par ^= d; + DiseqcSendBit(budget, d); + } + + DiseqcSendBit(budget, par); +} + +static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst) +{ + struct saa7146_dev *dev=budget->dev; + int i; + + dprintk(2, "budget: %p\n", budget); + + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + mdelay(16); + + for (i=0; idev; + + dprintk(2, "budget: %p\n", budget); + + switch (voltage) { + case SEC_VOLTAGE_13: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); + saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO); + break; + case SEC_VOLTAGE_18: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); + saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); + break; + case SEC_VOLTAGE_OFF: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + + return SetVoltage_Activy (budget, voltage); +} + +static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + + switch (tone) { + case SEC_TONE_ON: + Set22K (budget, 1); + break; + + case SEC_TONE_OFF: + Set22K (budget, 0); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + + SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0); + + return 0; +} + +static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + + SendDiSEqCMsg (budget, 0, NULL, minicmd); + + return 0; +} + +static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget* budget = (struct budget*) fe->dvb->priv; + u8 pwr = 0; + u8 buf[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + u32 div = (c->frequency + 479500) / 125; + + if (c->frequency > 2000000) + pwr = 3; + else if (c->frequency > 1800000) + pwr = 2; + else if (c->frequency > 1600000) + pwr = 1; + else if (c->frequency > 1200000) + pwr = 0; + else if (c->frequency >= 1100000) + pwr = 1; + else pwr = 2; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = ((div & 0x18000) >> 10) | 0x95; + buf[3] = (pwr << 6) | 0x30; + + // NOTE: since we're using a prescaler of 2, we set the + // divisor frequency to 62.5kHz and divide by 125 above + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct ves1x93_config alps_bsrv2_config = +{ + .demod_address = 0x08, + .xin = 90100000UL, + .invert_pwm = 0, +}; + +static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget* budget = (struct budget*) fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = (c->frequency + 35937500 + 31250) / 62500; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x85 | ((div >> 10) & 0x60); + data[3] = (c->frequency < 174000000 ? 0x88 : c->frequency < 470000000 ? 0x84 : 0x81); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct ves1820_config alps_tdbe2_config = { + .demod_address = 0x09, + .xin = 57840000UL, + .invert = 1, + .selagc = VES1820_SELAGC_SIGNAMPERR, +}; + +static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = fe->dvb->priv; + u8 *tuner_addr = fe->tuner_priv; + u32 div; + u8 cfg, cpump, band_select; + u8 data[4]; + struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) }; + + if (tuner_addr) + msg.addr = *tuner_addr; + else + msg.addr = 0x61; + + div = (36125000 + c->frequency) / 166666; + + cfg = 0x88; + + if (c->frequency < 175000000) + cpump = 2; + else if (c->frequency < 390000000) + cpump = 1; + else if (c->frequency < 470000000) + cpump = 2; + else if (c->frequency < 750000000) + cpump = 1; + else + cpump = 3; + + if (c->frequency < 175000000) + band_select = 0x0e; + else if (c->frequency < 470000000) + band_select = 0x05; + else + band_select = 0x03; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = ((div >> 10) & 0x60) | cfg; + data[3] = (cpump << 6) | band_select; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct l64781_config grundig_29504_401_config = { + .demod_address = 0x55, +}; + +static struct l64781_config grundig_29504_401_config_activy = { + .demod_address = 0x54, +}; + +static u8 tuner_address_grundig_29504_401_activy = 0x60; + +static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget* budget = (struct budget*) fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = c->frequency / 125; + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x8e; + data[3] = 0x00; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct tda8083_config grundig_29504_451_config = { + .demod_address = 0x68, +}; + +static int s5h1420_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget* budget = (struct budget*) fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = c->frequency / 1000; + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0xc2; + + if (div < 1450) + data[3] = 0x00; + else if (div < 1850) + data[3] = 0x40; + else if (div < 2000) + data[3] = 0x80; + else + data[3] = 0xc0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + + return 0; +} + +static struct s5h1420_config s5h1420_config = { + .demod_address = 0x53, + .invert = 1, + .cdclk_polarity = 1, +}; + +static struct tda10086_config tda10086_config = { + .demod_address = 0x0e, + .invert = 0, + .diseqc_tone = 1, + .xtal_freq = TDA10086_XTAL_16M, +}; + +static struct stv0299_config alps_bsru6_config_activy = { + .demod_address = 0x68, + .inittab = alps_bsru6_inittab, + .mclk = 88000000UL, + .invert = 1, + .op0_off = 1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, +}; + +static struct stv0299_config alps_bsbe1_config_activy = { + .demod_address = 0x68, + .inittab = alps_bsbe1_inittab, + .mclk = 88000000UL, + .invert = 1, + .op0_off = 1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsbe1_set_symbol_rate, +}; + +static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) +{ + struct budget *budget = (struct budget *)fe->dvb->priv; + + return request_firmware(fw, name, &budget->dev->pci->dev); +} + + +static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) +{ + u8 val; + struct i2c_msg msg[] = { + { .addr = adr, .flags = 0, .buf = ®, .len = 1 }, + { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 } + }; + + return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val; +} + +static u8 read_pwm(struct budget* budget) +{ + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, + { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; + + if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static struct stv090x_config tt1600_stv090x_config = { + .device = STV0903, + .demod_mode = STV090x_SINGLE, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 13500000, + .address = 0x68, + + .ts1_mode = STV090x_TSMODE_DVBCI, + .ts2_mode = STV090x_TSMODE_SERIAL_CONTINUOUS, + + .repeater_level = STV090x_RPTLEVEL_16, + + .tuner_init = NULL, + .tuner_sleep = NULL, + .tuner_set_mode = NULL, + .tuner_set_frequency = NULL, + .tuner_get_frequency = NULL, + .tuner_set_bandwidth = NULL, + .tuner_get_bandwidth = NULL, + .tuner_set_bbgain = NULL, + .tuner_get_bbgain = NULL, + .tuner_set_refclk = NULL, + .tuner_get_status = NULL, +}; + +static struct stv6110x_config tt1600_stv6110x_config = { + .addr = 0x60, + .refclk = 27000000, + .clk_div = 2, +}; + +static struct isl6423_config tt1600_isl6423_config = { + .current_max = SEC_CURRENT_515m, + .curlim = SEC_CURRENT_LIM_ON, + .mod_extern = 1, + .addr = 0x08, +}; + +static void frontend_init(struct budget *budget) +{ + (void)alps_bsbe1_config; /* avoid warning */ + + switch(budget->dev->pci->subsystem_device) { + case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) + case 0x1013: + // try the ALPS BSRV2 first of all + budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params; + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_set_tone; + break; + } + + // try the ALPS BSRU6 now + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) { + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_set_tone; + } + break; + } + break; + + case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) + + budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget)); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; + break; + } + break; + + case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060)) + + budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + budget->dvb_frontend->tuner_priv = NULL; + break; + } + break; + + case 0x4f52: /* Cards based on Philips Semi Sylt PCI ref. design */ + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSRU6 in Philips Semi. Sylt detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + break; + } + break; + + case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */ + { + int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67); + + if (subtype < 0) + break; + /* fixme: find a better way to identify the card */ + if (subtype < 0x36) { + /* assume ALPS BSRU6 */ + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + break; + } + } else { + /* assume ALPS BSBE1 */ + /* reset tuner */ + saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI); + msleep(250); + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + break; + } + } + break; + } + + case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522)) + budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + } + break; + + case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */ + budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + } + break; + + case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */ + budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy; + budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + } + break; + + case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) + budget->dvb_frontend = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = s5h1420_tuner_set_params; + if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { + printk("%s: No LNBP21 found!\n", __func__); + goto error_out; + } + break; + } + + case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262) + // gpio2 is connected to CLB - reset it + leave it high + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + msleep(1); + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + msleep(1); + + budget->dvb_frontend = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + if (dvb_attach(tda826x_attach, budget->dvb_frontend, 0x60, &budget->i2c_adap, 0) == NULL) + printk("%s: No tda826x found!\n", __func__); + if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { + printk("%s: No LNBP21 found!\n", __func__); + goto error_out; + } + break; + } + + case 0x101c: { /* TT S2-1600 */ + struct stv6110x_devctl *ctl; + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + msleep(250); + + budget->dvb_frontend = dvb_attach(stv090x_attach, + &tt1600_stv090x_config, + &budget->i2c_adap, + STV090x_DEMODULATOR_0); + + if (budget->dvb_frontend) { + + ctl = dvb_attach(stv6110x_attach, + budget->dvb_frontend, + &tt1600_stv6110x_config, + &budget->i2c_adap); + + if (ctl) { + tt1600_stv090x_config.tuner_init = ctl->tuner_init; + tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; + tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; + tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; + tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; + tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; + tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; + tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; + tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; + tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; + tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; + + /* call the init function once to initialize + tuner's clock output divider and demod's + master clock */ + if (budget->dvb_frontend->ops.init) + budget->dvb_frontend->ops.init(budget->dvb_frontend); + + if (dvb_attach(isl6423_attach, + budget->dvb_frontend, + &budget->i2c_adap, + &tt1600_isl6423_config) == NULL) { + printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__); + goto error_out; + } + } else { + printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); + goto error_out; + } + } + } + break; + + case 0x1020: { /* Omicom S2 */ + struct stv6110x_devctl *ctl; + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + msleep(250); + + budget->dvb_frontend = dvb_attach(stv090x_attach, + &tt1600_stv090x_config, + &budget->i2c_adap, + STV090x_DEMODULATOR_0); + + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: Omicom S2 detected\n"); + + ctl = dvb_attach(stv6110x_attach, + budget->dvb_frontend, + &tt1600_stv6110x_config, + &budget->i2c_adap); + + if (ctl) { + tt1600_stv090x_config.tuner_init = ctl->tuner_init; + tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; + tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; + tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; + tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; + tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; + tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; + tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; + tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; + tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; + tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; + + /* call the init function once to initialize + tuner's clock output divider and demod's + master clock */ + if (budget->dvb_frontend->ops.init) + budget->dvb_frontend->ops.init(budget->dvb_frontend); + + if (dvb_attach(lnbh24_attach, + budget->dvb_frontend, + &budget->i2c_adap, + LNBH24_PCL | LNBH24_TTX, + LNBH24_TEN, 0x14>>1) == NULL) { + printk(KERN_ERR + "No LNBH24 found!\n"); + goto error_out; + } + } else { + printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); + goto error_out; + } + } + } + break; + } + + if (budget->dvb_frontend == NULL) { + printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + budget->dev->pci->vendor, + budget->dev->pci->device, + budget->dev->pci->subsystem_vendor, + budget->dev->pci->subsystem_device); + } else { + if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) + goto error_out; + } + return; + +error_out: + printk("budget: Frontend registration failed!\n"); + dvb_frontend_detach(budget->dvb_frontend); + budget->dvb_frontend = NULL; + return; +} + +static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) +{ + struct budget *budget = NULL; + int err; + + budget = kmalloc(sizeof(struct budget), GFP_KERNEL); + if( NULL == budget ) { + return -ENOMEM; + } + + dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget); + + dev->ext_priv = budget; + + err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); + if (err) { + printk("==> failed\n"); + kfree (budget); + return err; + } + + budget->dvb_adapter.priv = budget; + frontend_init(budget); + + ttpci_budget_init_hooks(budget); + + return 0; +} + +static int budget_detach (struct saa7146_dev* dev) +{ + struct budget *budget = (struct budget*) dev->ext_priv; + int err; + + if (budget->dvb_frontend) { + dvb_unregister_frontend(budget->dvb_frontend); + dvb_frontend_detach(budget->dvb_frontend); + } + + err = ttpci_budget_deinit (budget); + + kfree (budget); + dev->ext_priv = NULL; + + return err; +} + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); +MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); +MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(omicom, "Omicom S2 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(sylt, "Philips Semi Sylt PCI", BUDGET_TT_HW_DISEQC); + +static struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), + MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), + MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), + MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), + MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), + MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), + MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c), + MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), + MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), + MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60), + MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), + MAKE_EXTENSION_PCI(omicom, 0x14c4, 0x1020), + MAKE_EXTENSION_PCI(sylt, 0x1131, 0x4f52), + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_extension budget_extension = { + .name = "budget dvb", + .flags = SAA7146_USE_I2C_IRQ, + + .module = THIS_MODULE, + .pci_tbl = pci_tbl, + .attach = budget_attach, + .detach = budget_detach, + + .irq_mask = MASK_10, + .irq_func = ttpci_budget_irq10_handler, +}; + +static int __init budget_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +module_init(budget_init); +module_exit(budget_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called " + "budget PCI DVB cards by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/media/pci/ttpci/budget.h b/drivers/media/pci/ttpci/budget.h new file mode 100644 index 00000000..3d8a806c --- /dev/null +++ b/drivers/media/pci/ttpci/budget.h @@ -0,0 +1,124 @@ + +#ifndef __BUDGET_DVB__ +#define __BUDGET_DVB__ + +#include "dvb_frontend.h" +#include "dvbdev.h" +#include "demux.h" +#include "dvb_demux.h" +#include "dmxdev.h" +#include "dvb_filter.h" +#include "dvb_net.h" + +#include +#include + +#include + +extern int budget_debug; + +#ifdef dprintk +#undef dprintk +#endif + +#define dprintk(level,args...) \ + do { if ((budget_debug & level)) { printk("%s: %s(): ", KBUILD_MODNAME, __func__); printk(args); } } while (0) + +struct budget_info { + char *name; + int type; +}; + +/* place to store all the necessary device information */ +struct budget { + + /* devices */ + struct dvb_device dvb_dev; + struct dvb_net dvb_net; + + struct saa7146_dev *dev; + + struct i2c_adapter i2c_adap; + struct budget_info *card; + + unsigned char *grabbing; + struct saa7146_pgtable pt; + + struct tasklet_struct fidb_tasklet; + struct tasklet_struct vpe_tasklet; + + struct dmxdev dmxdev; + struct dvb_demux demux; + + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + + int ci_present; + int video_port; + + u32 buffer_width; + u32 buffer_height; + u32 buffer_size; + u32 buffer_warning_threshold; + u32 buffer_warnings; + unsigned long buffer_warning_time; + + u32 ttbp; + int feeding; + + spinlock_t feedlock; + + spinlock_t debilock; + + struct dvb_adapter dvb_adapter; + struct dvb_frontend *dvb_frontend; + int (*read_fe_status)(struct dvb_frontend *fe, fe_status_t *status); + int fe_synced; + + void *priv; +}; + +#define MAKE_BUDGET_INFO(x_var,x_name,x_type) \ +static struct budget_info x_var ## _info = { \ + .name=x_name, \ + .type=x_type }; \ +static struct saa7146_pci_extension_data x_var = { \ + .ext_priv = &x_var ## _info, \ + .ext = &budget_extension }; + +#define BUDGET_TT 0 +#define BUDGET_TT_HW_DISEQC 1 +#define BUDGET_PATCH 3 +#define BUDGET_FS_ACTIVY 4 +#define BUDGET_CIN1200S 5 +#define BUDGET_CIN1200C 6 +#define BUDGET_CIN1200T 7 +#define BUDGET_KNC1S 8 +#define BUDGET_KNC1C 9 +#define BUDGET_KNC1T 10 +#define BUDGET_KNC1SP 11 +#define BUDGET_KNC1CP 12 +#define BUDGET_KNC1TP 13 +#define BUDGET_TVSTAR 14 +#define BUDGET_CIN1200C_MK3 15 +#define BUDGET_KNC1C_MK3 16 +#define BUDGET_KNC1CP_MK3 17 +#define BUDGET_KNC1S2 18 +#define BUDGET_KNC1C_TDA10024 19 + +#define BUDGET_VIDEO_PORTA 0 +#define BUDGET_VIDEO_PORTB 1 + +extern int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, + struct saa7146_pci_extension_data *info, + struct module *owner, short *adapter_nums); +extern void ttpci_budget_init_hooks(struct budget *budget); +extern int ttpci_budget_deinit(struct budget *budget); +extern void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr); +extern void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port); +extern int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count, + int uselocks, int nobusyloop); +extern int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, int count, u32 value, + int uselocks, int nobusyloop); + +#endif diff --git a/drivers/media/pci/ttpci/ttpci-eeprom.c b/drivers/media/pci/ttpci/ttpci-eeprom.c new file mode 100644 index 00000000..32d43156 --- /dev/null +++ b/drivers/media/pci/ttpci/ttpci-eeprom.c @@ -0,0 +1,176 @@ +/* + Retrieve encoded MAC address from 24C16 serial 2-wire EEPROM, + decode it and store it in the associated adapter struct for + use by dvb_net.c + + This card appear to have the 24C16 write protect held to ground, + thus permitting normal read/write operation. Theoretically it + would be possible to write routines to burn a different (encoded) + MAC address into the EEPROM. + + Robert Schlabbach GMX + Michael Glaum KVH Industries + Holger Waechtler Convergence + + Copyright (C) 2002-2003 Ralph Metzler + Metzler Brothers Systementwicklung GbR + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include + +#include "ttpci-eeprom.h" + +#if 1 +#define dprintk(x...) do { printk(x); } while (0) +#else +#define dprintk(x...) do { } while (0) +#endif + + +static int check_mac_tt(u8 *buf) +{ + int i; + u16 tmp = 0xffff; + + for (i = 0; i < 8; i++) { + tmp = (tmp << 8) | ((tmp >> 8) ^ buf[i]); + tmp ^= (tmp >> 4) & 0x0f; + tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5); + } + tmp ^= 0xffff; + return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9])); +} + +static int getmac_tt(u8 * decodedMAC, u8 * encodedMAC) +{ + u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c, + 0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6, + 0x1d, 0x36, 0x64, 0x78}; + u8 data[20]; + int i; + + /* In case there is a sig check failure have the orig contents available */ + memcpy(data, encodedMAC, 20); + + for (i = 0; i < 20; i++) + data[i] ^= xor[i]; + for (i = 0; i < 10; i++) + data[i] = ((data[2 * i + 1] << 8) | data[2 * i]) + >> ((data[2 * i + 1] >> 6) & 3); + + if (check_mac_tt(data)) + return -ENODEV; + + decodedMAC[0] = data[2]; decodedMAC[1] = data[1]; decodedMAC[2] = data[0]; + decodedMAC[3] = data[6]; decodedMAC[4] = data[5]; decodedMAC[5] = data[4]; + return 0; +} + +int ttpci_eeprom_decode_mac(u8 *decodedMAC, u8 *encodedMAC) +{ + u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c, + 0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6, + 0x1d, 0x36, 0x64, 0x78}; + u8 data[20]; + int i; + + memcpy(data, encodedMAC, 20); + + for (i = 0; i < 20; i++) + data[i] ^= xor[i]; + for (i = 0; i < 10; i++) + data[i] = ((data[2 * i + 1] << 8) | data[2 * i]) + >> ((data[2 * i + 1] >> 6) & 3); + + if (check_mac_tt(data)) + return -ENODEV; + + decodedMAC[0] = data[2]; + decodedMAC[1] = data[1]; + decodedMAC[2] = data[0]; + decodedMAC[3] = data[6]; + decodedMAC[4] = data[5]; + decodedMAC[5] = data[4]; + return 0; +} +EXPORT_SYMBOL(ttpci_eeprom_decode_mac); + +static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC) +{ + int ret; + u8 b0[] = { 0xcc }; + + struct i2c_msg msg[] = { + { .addr = 0x50, .flags = 0, .buf = b0, .len = 1 }, + { .addr = 0x50, .flags = I2C_M_RD, .buf = encodedMAC, .len = 20 } + }; + + /* dprintk("%s\n", __func__); */ + + ret = i2c_transfer(adapter, msg, 2); + + if (ret != 2) /* Assume EEPROM isn't there */ + return (-ENODEV); + + return 0; +} + + +int ttpci_eeprom_parse_mac(struct i2c_adapter *adapter, u8 *proposed_mac) +{ + int ret, i; + u8 encodedMAC[20]; + u8 decodedMAC[6]; + + ret = ttpci_eeprom_read_encodedMAC(adapter, encodedMAC); + + if (ret != 0) { /* Will only be -ENODEV */ + dprintk("Couldn't read from EEPROM: not there?\n"); + memset(proposed_mac, 0, 6); + return ret; + } + + ret = getmac_tt(decodedMAC, encodedMAC); + if( ret != 0 ) { + dprintk("adapter failed MAC signature check\n"); + dprintk("encoded MAC from EEPROM was " ); + for(i=0; i<19; i++) { + dprintk( "%.2x:", encodedMAC[i]); + } + dprintk("%.2x\n", encodedMAC[19]); + memset(proposed_mac, 0, 6); + return ret; + } + + memcpy(proposed_mac, decodedMAC, 6); + dprintk("adapter has MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", + decodedMAC[0], decodedMAC[1], decodedMAC[2], + decodedMAC[3], decodedMAC[4], decodedMAC[5]); + return 0; +} + +EXPORT_SYMBOL(ttpci_eeprom_parse_mac); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others"); +MODULE_DESCRIPTION("Decode dvb_net MAC address from EEPROM of PCI DVB cards " + "made by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/media/pci/ttpci/ttpci-eeprom.h b/drivers/media/pci/ttpci/ttpci-eeprom.h new file mode 100644 index 00000000..dcc33d5a --- /dev/null +++ b/drivers/media/pci/ttpci/ttpci-eeprom.h @@ -0,0 +1,34 @@ +/* + Retrieve encoded MAC address from ATMEL ttpci_eeprom serial 2-wire EEPROM, + decode it and store it in associated adapter net device + + Robert Schlabbach GMX + Michael Glaum KVH Industries + Holger Waechtler Convergence + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef __TTPCI_EEPROM_H__ +#define __TTPCI_EEPROM_H__ + +#include +#include + +extern int ttpci_eeprom_decode_mac(u8 *decodedMAC, u8 *encodedMAC); +extern int ttpci_eeprom_parse_mac(struct i2c_adapter *adapter, u8 *propsed_mac); + +#endif diff --git a/drivers/media/pci/zoran/Kconfig b/drivers/media/pci/zoran/Kconfig new file mode 100644 index 00000000..26ca8702 --- /dev/null +++ b/drivers/media/pci/zoran/Kconfig @@ -0,0 +1,74 @@ +config VIDEO_ZORAN + tristate "Zoran ZR36057/36067 Video For Linux" + depends on PCI && I2C_ALGOBIT && VIDEO_V4L2 && VIRT_TO_BUS + help + Say Y for support for MJPEG capture cards based on the Zoran + 36057/36067 PCI controller chipset. This includes the Iomega + Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is + a driver homepage at . For + more information, check . + + To compile this driver as a module, choose M here: the + module will be called zr36067. + +config VIDEO_ZORAN_DC30 + tristate "Pinnacle/Miro DC30(+) support" + depends on VIDEO_ZORAN + select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_VPX3220 if MEDIA_SUBDRV_AUTOSELECT + help + Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback + card. This also supports really old DC10 cards based on the + zr36050 MJPEG codec and zr36016 VFE. + +config VIDEO_ZORAN_ZR36060 + tristate "Zoran ZR36060" + depends on VIDEO_ZORAN + help + Say Y to support Zoran boards based on 36060 chips. + This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 + and 33 R10 and AverMedia 6 boards. + +config VIDEO_ZORAN_BUZ + tristate "Iomega Buz support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_SAA7185 if MEDIA_SUBDRV_AUTOSELECT + help + Support for the Iomega Buz MJPEG capture/playback card. + +config VIDEO_ZORAN_DC10 + tristate "Pinnacle/Miro DC10(+) support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA7110 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT + help + Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback + card. + +config VIDEO_ZORAN_LML33 + tristate "Linux Media Labs LML33 support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_BT819 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT + help + Support for the Linux Media Labs LML33 MJPEG capture/playback + card. + +config VIDEO_ZORAN_LML33R10 + tristate "Linux Media Labs LML33R10 support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_ADV7170 if MEDIA_SUBDRV_AUTOSELECT + help + support for the Linux Media Labs LML33R10 MJPEG capture/playback + card. + +config VIDEO_ZORAN_AVS6EYES + tristate "AverMedia 6 Eyes support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_BT866 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_KS0127 if MEDIA_SUBDRV_AUTOSELECT + help + Support for the AverMedia 6 Eyes video surveillance card. diff --git a/drivers/media/pci/zoran/Makefile b/drivers/media/pci/zoran/Makefile new file mode 100644 index 00000000..44cc1335 --- /dev/null +++ b/drivers/media/pci/zoran/Makefile @@ -0,0 +1,6 @@ +zr36067-objs := zoran_procfs.o zoran_device.o \ + zoran_driver.o zoran_card.o + +obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o +obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o +obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o diff --git a/drivers/media/pci/zoran/videocodec.c b/drivers/media/pci/zoran/videocodec.c new file mode 100644 index 00000000..c0107163 --- /dev/null +++ b/drivers/media/pci/zoran/videocodec.c @@ -0,0 +1,407 @@ +/* + * VIDEO MOTION CODECs internal API for video devices + * + * Interface for MJPEG (and maybe later MPEG/WAVELETS) codec's + * bound to a master device. + * + * (c) 2002 Wolfgang Scherr + * + * $Id: videocodec.c,v 1.1.2.8 2003/03/29 07:16:04 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define VIDEOCODEC_VERSION "v0.2" + +#include +#include +#include +#include +#include + +// kernel config is here (procfs flag) + +#ifdef CONFIG_PROC_FS +#include +#include +#include +#endif + +#include "videocodec.h" + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +struct attached_list { + struct videocodec *codec; + struct attached_list *next; +}; + +struct codec_list { + const struct videocodec *codec; + int attached; + struct attached_list *list; + struct codec_list *next; +}; + +static struct codec_list *codeclist_top = NULL; + +/* ================================================= */ +/* function prototypes of the master/slave interface */ +/* ================================================= */ + +struct videocodec * +videocodec_attach (struct videocodec_master *master) +{ + struct codec_list *h = codeclist_top; + struct attached_list *a, *ptr; + struct videocodec *codec; + int res; + + if (!master) { + dprintk(1, KERN_ERR "videocodec_attach: no data\n"); + return NULL; + } + + dprintk(2, + "videocodec_attach: '%s', flags %lx, magic %lx\n", + master->name, master->flags, master->magic); + + if (!h) { + dprintk(1, + KERN_ERR + "videocodec_attach: no device available\n"); + return NULL; + } + + while (h) { + // attach only if the slave has at least the flags + // expected by the master + if ((master->flags & h->codec->flags) == master->flags) { + dprintk(4, "videocodec_attach: try '%s'\n", + h->codec->name); + + if (!try_module_get(h->codec->owner)) + return NULL; + + codec = kmemdup(h->codec, sizeof(struct videocodec), + GFP_KERNEL); + if (!codec) { + dprintk(1, + KERN_ERR + "videocodec_attach: no mem\n"); + goto out_module_put; + } + + snprintf(codec->name, sizeof(codec->name), + "%s[%d]", codec->name, h->attached); + codec->master_data = master; + res = codec->setup(codec); + if (res == 0) { + dprintk(3, "videocodec_attach '%s'\n", + codec->name); + ptr = kzalloc(sizeof(struct attached_list), GFP_KERNEL); + if (!ptr) { + dprintk(1, + KERN_ERR + "videocodec_attach: no memory\n"); + goto out_kfree; + } + ptr->codec = codec; + + a = h->list; + if (!a) { + h->list = ptr; + dprintk(4, + "videocodec: first element\n"); + } else { + while (a->next) + a = a->next; // find end + a->next = ptr; + dprintk(4, + "videocodec: in after '%s'\n", + h->codec->name); + } + + h->attached += 1; + return codec; + } else { + kfree(codec); + } + } + h = h->next; + } + + dprintk(1, KERN_ERR "videocodec_attach: no codec found!\n"); + return NULL; + + out_module_put: + module_put(h->codec->owner); + out_kfree: + kfree(codec); + return NULL; +} + +int +videocodec_detach (struct videocodec *codec) +{ + struct codec_list *h = codeclist_top; + struct attached_list *a, *prev; + int res; + + if (!codec) { + dprintk(1, KERN_ERR "videocodec_detach: no data\n"); + return -EINVAL; + } + + dprintk(2, + "videocodec_detach: '%s', type: %x, flags %lx, magic %lx\n", + codec->name, codec->type, codec->flags, codec->magic); + + if (!h) { + dprintk(1, + KERN_ERR "videocodec_detach: no device left...\n"); + return -ENXIO; + } + + while (h) { + a = h->list; + prev = NULL; + while (a) { + if (codec == a->codec) { + res = a->codec->unset(a->codec); + if (res >= 0) { + dprintk(3, + "videocodec_detach: '%s'\n", + a->codec->name); + a->codec->master_data = NULL; + } else { + dprintk(1, + KERN_ERR + "videocodec_detach: '%s'\n", + a->codec->name); + a->codec->master_data = NULL; + } + if (prev == NULL) { + h->list = a->next; + dprintk(4, + "videocodec: delete first\n"); + } else { + prev->next = a->next; + dprintk(4, + "videocodec: delete middle\n"); + } + module_put(a->codec->owner); + kfree(a->codec); + kfree(a); + h->attached -= 1; + return 0; + } + prev = a; + a = a->next; + } + h = h->next; + } + + dprintk(1, KERN_ERR "videocodec_detach: given codec not found!\n"); + return -EINVAL; +} + +int +videocodec_register (const struct videocodec *codec) +{ + struct codec_list *ptr, *h = codeclist_top; + + if (!codec) { + dprintk(1, KERN_ERR "videocodec_register: no data!\n"); + return -EINVAL; + } + + dprintk(2, + "videocodec: register '%s', type: %x, flags %lx, magic %lx\n", + codec->name, codec->type, codec->flags, codec->magic); + + ptr = kzalloc(sizeof(struct codec_list), GFP_KERNEL); + if (!ptr) { + dprintk(1, KERN_ERR "videocodec_register: no memory\n"); + return -ENOMEM; + } + ptr->codec = codec; + + if (!h) { + codeclist_top = ptr; + dprintk(4, "videocodec: hooked in as first element\n"); + } else { + while (h->next) + h = h->next; // find the end + h->next = ptr; + dprintk(4, "videocodec: hooked in after '%s'\n", + h->codec->name); + } + + return 0; +} + +int +videocodec_unregister (const struct videocodec *codec) +{ + struct codec_list *prev = NULL, *h = codeclist_top; + + if (!codec) { + dprintk(1, KERN_ERR "videocodec_unregister: no data!\n"); + return -EINVAL; + } + + dprintk(2, + "videocodec: unregister '%s', type: %x, flags %lx, magic %lx\n", + codec->name, codec->type, codec->flags, codec->magic); + + if (!h) { + dprintk(1, + KERN_ERR + "videocodec_unregister: no device left...\n"); + return -ENXIO; + } + + while (h) { + if (codec == h->codec) { + if (h->attached) { + dprintk(1, + KERN_ERR + "videocodec: '%s' is used\n", + h->codec->name); + return -EBUSY; + } + dprintk(3, "videocodec: unregister '%s' is ok.\n", + h->codec->name); + if (prev == NULL) { + codeclist_top = h->next; + dprintk(4, + "videocodec: delete first element\n"); + } else { + prev->next = h->next; + dprintk(4, + "videocodec: delete middle element\n"); + } + kfree(h); + return 0; + } + prev = h; + h = h->next; + } + + dprintk(1, + KERN_ERR + "videocodec_unregister: given codec not found!\n"); + return -EINVAL; +} + +#ifdef CONFIG_PROC_FS +static int proc_videocodecs_show(struct seq_file *m, void *v) +{ + struct codec_list *h = codeclist_top; + struct attached_list *a; + + seq_printf(m, "lave or attached aster name type flags magic "); + seq_printf(m, "(connected as)\n"); + + h = codeclist_top; + while (h) { + seq_printf(m, "S %32s %04x %08lx %08lx (TEMPLATE)\n", + h->codec->name, h->codec->type, + h->codec->flags, h->codec->magic); + a = h->list; + while (a) { + seq_printf(m, "M %32s %04x %08lx %08lx (%s)\n", + a->codec->master_data->name, + a->codec->master_data->type, + a->codec->master_data->flags, + a->codec->master_data->magic, + a->codec->name); + a = a->next; + } + h = h->next; + } + + return 0; +} + +static int proc_videocodecs_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_videocodecs_show, NULL); +} + +static const struct file_operations videocodecs_proc_fops = { + .owner = THIS_MODULE, + .open = proc_videocodecs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +/* ===================== */ +/* hook in driver module */ +/* ===================== */ +static int __init +videocodec_init (void) +{ +#ifdef CONFIG_PROC_FS + static struct proc_dir_entry *videocodec_proc_entry; +#endif + + printk(KERN_INFO "Linux video codec intermediate layer: %s\n", + VIDEOCODEC_VERSION); + +#ifdef CONFIG_PROC_FS + videocodec_proc_entry = proc_create("videocodecs", 0, NULL, &videocodecs_proc_fops); + if (!videocodec_proc_entry) { + dprintk(1, KERN_ERR "videocodec: can't init procfs.\n"); + } +#endif + return 0; +} + +static void __exit +videocodec_exit (void) +{ +#ifdef CONFIG_PROC_FS + remove_proc_entry("videocodecs", NULL); +#endif +} + +EXPORT_SYMBOL(videocodec_attach); +EXPORT_SYMBOL(videocodec_detach); +EXPORT_SYMBOL(videocodec_register); +EXPORT_SYMBOL(videocodec_unregister); + +module_init(videocodec_init); +module_exit(videocodec_exit); + +MODULE_AUTHOR("Wolfgang Scherr "); +MODULE_DESCRIPTION("Intermediate API module for video codecs " + VIDEOCODEC_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/zoran/videocodec.h b/drivers/media/pci/zoran/videocodec.h new file mode 100644 index 00000000..def55585 --- /dev/null +++ b/drivers/media/pci/zoran/videocodec.h @@ -0,0 +1,353 @@ +/* + * VIDEO MOTION CODECs internal API for video devices + * + * Interface for MJPEG (and maybe later MPEG/WAVELETS) codec's + * bound to a master device. + * + * (c) 2002 Wolfgang Scherr + * + * $Id: videocodec.h,v 1.1.2.4 2003/01/14 21:15:03 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +/* =================== */ +/* general description */ +/* =================== */ + +/* Should ease the (re-)usage of drivers supporting cards with (different) + video codecs. The codecs register to this module their functionality, + and the processors (masters) can attach to them if they fit. + + The codecs are typically have a "strong" binding to their master - so I + don't think it makes sense to have a full blown interfacing as with e.g. + i2c. If you have an other opinion, let's discuss & implement it :-))) + + Usage: + + The slave has just to setup the videocodec structure and use two functions: + videocodec_register(codecdata); + videocodec_unregister(codecdata); + The best is just calling them at module (de-)initialisation. + + The master sets up the structure videocodec_master and calls: + codecdata=videocodec_attach(master_codecdata); + videocodec_detach(codecdata); + + The slave is called during attach/detach via functions setup previously + during register. At that time, the master_data pointer is set up + and the slave can access any io registers of the master device (in the case + the slave is bound to it). Otherwise it doesn't need this functions and + therfor they may not be initialized. + + The other functions are just for convenience, as they are for sure used by + most/all of the codecs. The last ones may be omitted, too. + + See the structure declaration below for more information and which data has + to be set up for the master and the slave. + + ---------------------------------------------------------------------------- + The master should have "knowledge" of the slave and vice versa. So the data + structures sent to/from slave via set_data/get_data set_image/get_image are + device dependent and vary between MJPEG/MPEG/WAVELET/... devices. (!!!!) + ---------------------------------------------------------------------------- +*/ + + +/* ========================================== */ +/* description of the videocodec_io structure */ +/* ========================================== */ + +/* + ==== master setup ==== + name -> name of the device structure for reference and debugging + master_data -> data ref. for the master (e.g. the zr36055,57,67) + readreg -> ref. to read-fn from register (setup by master, used by slave) + writereg -> ref. to write-fn to register (setup by master, used by slave) + this two functions do the lowlevel I/O job + + ==== slave functionality setup ==== + slave_data -> data ref. for the slave (e.g. the zr36050,60) + check -> fn-ref. checks availability of an device, returns -EIO on failure or + the type on success + this makes espcecially sense if a driver module supports more than + one codec which may be quite similar to access, nevertheless it + is good for a first functionality check + + -- main functions you always need for compression/decompression -- + + set_mode -> this fn-ref. resets the entire codec, and sets up the mode + with the last defined norm/size (or device default if not + available) - it returns 0 if the mode is possible + set_size -> this fn-ref. sets the norm and image size for + compression/decompression (returns 0 on success) + the norm param is defined in videodev2.h (V4L2_STD_*) + + additional setup may be available, too - but the codec should work with + some default values even without this + + set_data -> sets device-specific data (tables, quality etc.) + get_data -> query device-specific data (tables, quality etc.) + + if the device delivers interrupts, they may be setup/handled here + setup_interrupt -> codec irq setup (not needed for 36050/60) + handle_interrupt -> codec irq handling (not needed for 36050/60) + + if the device delivers pictures, they may be handled here + put_image -> puts image data to the codec (not needed for 36050/60) + get_image -> gets image data from the codec (not needed for 36050/60) + the calls include frame numbers and flags (even/odd/...) + if needed and a flag which allows blocking until its ready +*/ + +/* ============== */ +/* user interface */ +/* ============== */ + +/* + Currently there is only a information display planned, as the layer + is not visible for the user space at all. + + Information is available via procfs. The current entry is "/proc/videocodecs" + but it makes sense to "hide" it in the /proc/video tree of v4l(2) --TODO--. + +A example for such an output is: + +lave or attached aster name type flags magic (connected as) +S zr36050 0002 0000d001 00000000 (TEMPLATE) +M zr36055[0] 0001 0000c001 00000000 (zr36050[0]) +M zr36055[1] 0001 0000c001 00000000 (zr36050[1]) + +*/ + + +/* =============================================== */ +/* special defines for the videocodec_io structure */ +/* =============================================== */ + +#ifndef __LINUX_VIDEOCODEC_H +#define __LINUX_VIDEOCODEC_H + +#include + +#define CODEC_DO_COMPRESSION 0 +#define CODEC_DO_EXPANSION 1 + +/* this are the current codec flags I think they are needed */ +/* -> type value in structure */ +#define CODEC_FLAG_JPEG 0x00000001L // JPEG codec +#define CODEC_FLAG_MPEG 0x00000002L // MPEG1/2/4 codec +#define CODEC_FLAG_DIVX 0x00000004L // DIVX codec +#define CODEC_FLAG_WAVELET 0x00000008L // WAVELET codec + // room for other types + +#define CODEC_FLAG_MAGIC 0x00000800L // magic key must match +#define CODEC_FLAG_HARDWARE 0x00001000L // is a hardware codec +#define CODEC_FLAG_VFE 0x00002000L // has direct video frontend +#define CODEC_FLAG_ENCODER 0x00004000L // compression capability +#define CODEC_FLAG_DECODER 0x00008000L // decompression capability +#define CODEC_FLAG_NEEDIRQ 0x00010000L // needs irq handling +#define CODEC_FLAG_RDWRPIC 0x00020000L // handles picture I/O + +/* a list of modes, some are just examples (is there any HW?) */ +#define CODEC_MODE_BJPG 0x0001 // Baseline JPEG +#define CODEC_MODE_LJPG 0x0002 // Lossless JPEG +#define CODEC_MODE_MPEG1 0x0003 // MPEG 1 +#define CODEC_MODE_MPEG2 0x0004 // MPEG 2 +#define CODEC_MODE_MPEG4 0x0005 // MPEG 4 +#define CODEC_MODE_MSDIVX 0x0006 // MS DivX +#define CODEC_MODE_ODIVX 0x0007 // Open DivX +#define CODEC_MODE_WAVELET 0x0008 // Wavelet + +/* this are the current codec types I want to implement */ +/* -> type value in structure */ +#define CODEC_TYPE_NONE 0 +#define CODEC_TYPE_L64702 1 +#define CODEC_TYPE_ZR36050 2 +#define CODEC_TYPE_ZR36016 3 +#define CODEC_TYPE_ZR36060 4 + +/* the type of data may be enhanced by future implementations (data-fn.'s) */ +/* -> used in command */ +#define CODEC_G_STATUS 0x0000 /* codec status (query only) */ +#define CODEC_S_CODEC_MODE 0x0001 /* codec mode (baseline JPEG, MPEG1,... */ +#define CODEC_G_CODEC_MODE 0x8001 +#define CODEC_S_VFE 0x0002 /* additional video frontend setup */ +#define CODEC_G_VFE 0x8002 +#define CODEC_S_MMAP 0x0003 /* MMAP setup (if available) */ + +#define CODEC_S_JPEG_TDS_BYTE 0x0010 /* target data size in bytes */ +#define CODEC_G_JPEG_TDS_BYTE 0x8010 +#define CODEC_S_JPEG_SCALE 0x0011 /* scaling factor for quant. tables */ +#define CODEC_G_JPEG_SCALE 0x8011 +#define CODEC_S_JPEG_HDT_DATA 0x0018 /* huffman-tables */ +#define CODEC_G_JPEG_HDT_DATA 0x8018 +#define CODEC_S_JPEG_QDT_DATA 0x0019 /* quantizing-tables */ +#define CODEC_G_JPEG_QDT_DATA 0x8019 +#define CODEC_S_JPEG_APP_DATA 0x001A /* APP marker */ +#define CODEC_G_JPEG_APP_DATA 0x801A +#define CODEC_S_JPEG_COM_DATA 0x001B /* COM marker */ +#define CODEC_G_JPEG_COM_DATA 0x801B + +#define CODEC_S_PRIVATE 0x1000 /* "private" commands start here */ +#define CODEC_G_PRIVATE 0x9000 + +#define CODEC_G_FLAG 0x8000 /* this is how 'get' is detected */ + +/* types of transfer, directly user space or a kernel buffer (image-fn.'s) */ +/* -> used in get_image, put_image */ +#define CODEC_TRANSFER_KERNEL 0 /* use "memcopy" */ +#define CODEC_TRANSFER_USER 1 /* use "to/from_user" */ + + +/* ========================= */ +/* the structures itself ... */ +/* ========================= */ + +struct vfe_polarity { + unsigned int vsync_pol:1; + unsigned int hsync_pol:1; + unsigned int field_pol:1; + unsigned int blank_pol:1; + unsigned int subimg_pol:1; + unsigned int poe_pol:1; + unsigned int pvalid_pol:1; + unsigned int vclk_pol:1; +}; + +struct vfe_settings { + __u32 x, y; /* Offsets into image */ + __u32 width, height; /* Area to capture */ + __u16 decimation; /* Decimation divider */ + __u16 flags; /* Flags for capture */ + __u16 quality; /* quality of the video */ +}; + +struct tvnorm { + u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart; +}; + +struct jpeg_com_marker { + int len; /* number of usable bytes in data */ + char data[60]; +}; + +struct jpeg_app_marker { + int appn; /* number app segment */ + int len; /* number of usable bytes in data */ + char data[60]; +}; + +struct videocodec { + struct module *owner; + /* -- filled in by slave device during register -- */ + char name[32]; + unsigned long magic; /* may be used for client<->master attaching */ + unsigned long flags; /* functionality flags */ + unsigned int type; /* codec type */ + + /* -- these is filled in later during master device attach -- */ + + struct videocodec_master *master_data; + + /* -- these are filled in by the slave device during register -- */ + + void *data; /* private slave data */ + + /* attach/detach client functions (indirect call) */ + int (*setup) (struct videocodec * codec); + int (*unset) (struct videocodec * codec); + + /* main functions, every client needs them for sure! */ + // set compression or decompression (or freeze, stop, standby, etc) + int (*set_mode) (struct videocodec * codec, + int mode); + // setup picture size and norm (for the codec's video frontend) + int (*set_video) (struct videocodec * codec, + struct tvnorm * norm, + struct vfe_settings * cap, + struct vfe_polarity * pol); + // other control commands, also mmap setup etc. + int (*control) (struct videocodec * codec, + int type, + int size, + void *data); + + /* additional setup/query/processing (may be NULL pointer) */ + // interrupt setup / handling (for irq's delivered by master) + int (*setup_interrupt) (struct videocodec * codec, + long mode); + int (*handle_interrupt) (struct videocodec * codec, + int source, + long flag); + // picture interface (if any) + long (*put_image) (struct videocodec * codec, + int tr_type, + int block, + long *fr_num, + long *flag, + long size, + void *buf); + long (*get_image) (struct videocodec * codec, + int tr_type, + int block, + long *fr_num, + long *flag, + long size, + void *buf); +}; + +struct videocodec_master { + /* -- filled in by master device for registration -- */ + char name[32]; + unsigned long magic; /* may be used for client<->master attaching */ + unsigned long flags; /* functionality flags */ + unsigned int type; /* master type */ + + void *data; /* private master data */ + + __u32(*readreg) (struct videocodec * codec, + __u16 reg); + void (*writereg) (struct videocodec * codec, + __u16 reg, + __u32 value); +}; + + +/* ================================================= */ +/* function prototypes of the master/slave interface */ +/* ================================================= */ + +/* attach and detach commands for the master */ +// * master structure needs to be kmalloc'ed before calling attach +// and free'd after calling detach +// * returns pointer on success, NULL on failure +extern struct videocodec *videocodec_attach(struct videocodec_master *); +// * 0 on success, <0 (errno) on failure +extern int videocodec_detach(struct videocodec *); + +/* register and unregister commands for the slaves */ +// * 0 on success, <0 (errno) on failure +extern int videocodec_register(const struct videocodec *); +// * 0 on success, <0 (errno) on failure +extern int videocodec_unregister(const struct videocodec *); + +/* the other calls are directly done via the videocodec structure! */ + +#endif /*ifndef __LINUX_VIDEOCODEC_H */ diff --git a/drivers/media/pci/zoran/zoran.h b/drivers/media/pci/zoran/zoran.h new file mode 100644 index 00000000..5e040085 --- /dev/null +++ b/drivers/media/pci/zoran/zoran.h @@ -0,0 +1,403 @@ +/* + * zoran - Iomega Buz driver + * + * Copyright (C) 1999 Rainer Johanni + * + * based on + * + * zoran.0.0.3 Copyright (C) 1998 Dave Perks + * + * and + * + * bttv - Bt848 frame grabber driver + * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + * & Marcus Metzler (mocm@thp.uni-koeln.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BUZ_H_ +#define _BUZ_H_ + +#include + +struct zoran_sync { + unsigned long frame; /* number of buffer that has been free'd */ + unsigned long length; /* number of code bytes in buffer (capture only) */ + unsigned long seq; /* frame sequence number */ + struct timeval timestamp; /* timestamp */ +}; + + +#define ZORAN_NAME "ZORAN" /* name of the device */ + +#define ZR_DEVNAME(zr) ((zr)->name) + +#define BUZ_MAX_WIDTH (zr->timing->Wa) +#define BUZ_MAX_HEIGHT (zr->timing->Ha) +#define BUZ_MIN_WIDTH 32 /* never display less than 32 pixels */ +#define BUZ_MIN_HEIGHT 24 /* never display less than 24 rows */ + +#define BUZ_NUM_STAT_COM 4 +#define BUZ_MASK_STAT_COM 3 + +#define BUZ_MAX_FRAME 256 /* Must be a power of 2 */ +#define BUZ_MASK_FRAME 255 /* Must be BUZ_MAX_FRAME-1 */ + +#define BUZ_MAX_INPUT 16 + +#if VIDEO_MAX_FRAME <= 32 +# define V4L_MAX_FRAME 32 +#elif VIDEO_MAX_FRAME <= 64 +# define V4L_MAX_FRAME 64 +#else +# error "Too many video frame buffers to handle" +#endif +#define V4L_MASK_FRAME (V4L_MAX_FRAME - 1) + +#define MAX_FRAME (BUZ_MAX_FRAME > VIDEO_MAX_FRAME ? BUZ_MAX_FRAME : VIDEO_MAX_FRAME) + +#include "zr36057.h" + +enum card_type { + UNKNOWN = -1, + + /* Pinnacle/Miro */ + DC10_old, /* DC30 like */ + DC10_new, /* DC10plus like */ + DC10plus, + DC30, + DC30plus, + + /* Linux Media Labs */ + LML33, + LML33R10, + + /* Iomega */ + BUZ, + + /* AverMedia */ + AVS6EYES, + + /* total number of cards */ + NUM_CARDS +}; + +enum zoran_codec_mode { + BUZ_MODE_IDLE, /* nothing going on */ + BUZ_MODE_MOTION_COMPRESS, /* grabbing frames */ + BUZ_MODE_MOTION_DECOMPRESS, /* playing frames */ + BUZ_MODE_STILL_COMPRESS, /* still frame conversion */ + BUZ_MODE_STILL_DECOMPRESS /* still frame conversion */ +}; + +enum zoran_buffer_state { + BUZ_STATE_USER, /* buffer is owned by application */ + BUZ_STATE_PEND, /* buffer is queued in pend[] ready to feed to I/O */ + BUZ_STATE_DMA, /* buffer is queued in dma[] for I/O */ + BUZ_STATE_DONE /* buffer is ready to return to application */ +}; + +enum zoran_map_mode { + ZORAN_MAP_MODE_RAW, + ZORAN_MAP_MODE_JPG_REC, +#define ZORAN_MAP_MODE_JPG ZORAN_MAP_MODE_JPG_REC + ZORAN_MAP_MODE_JPG_PLAY, +}; + +enum gpio_type { + ZR_GPIO_JPEG_SLEEP = 0, + ZR_GPIO_JPEG_RESET, + ZR_GPIO_JPEG_FRAME, + ZR_GPIO_VID_DIR, + ZR_GPIO_VID_EN, + ZR_GPIO_VID_RESET, + ZR_GPIO_CLK_SEL1, + ZR_GPIO_CLK_SEL2, + ZR_GPIO_MAX, +}; + +enum gpcs_type { + GPCS_JPEG_RESET = 0, + GPCS_JPEG_START, + GPCS_MAX, +}; + +struct zoran_format { + char *name; + __u32 fourcc; + int colorspace; + int depth; + __u32 flags; + __u32 vfespfr; +}; +/* flags */ +#define ZORAN_FORMAT_COMPRESSED 1<<0 +#define ZORAN_FORMAT_OVERLAY 1<<1 +#define ZORAN_FORMAT_CAPTURE 1<<2 +#define ZORAN_FORMAT_PLAYBACK 1<<3 + +/* overlay-settings */ +struct zoran_overlay_settings { + int is_set; + int x, y, width, height; /* position */ + int clipcount; /* position and number of clips */ + const struct zoran_format *format; /* overlay format */ +}; + +/* v4l-capture settings */ +struct zoran_v4l_settings { + int width, height, bytesperline; /* capture size */ + const struct zoran_format *format; /* capture format */ +}; + +/* jpg-capture/-playback settings */ +struct zoran_jpg_settings { + int decimation; /* this bit is used to set everything to default */ + int HorDcm, VerDcm, TmpDcm; /* capture decimation settings (TmpDcm=1 means both fields) */ + int field_per_buff, odd_even; /* field-settings (odd_even=1 (+TmpDcm=1) means top-field-first) */ + int img_x, img_y, img_width, img_height; /* crop settings (subframe capture) */ + struct v4l2_jpegcompression jpg_comp; /* JPEG-specific capture settings */ +}; + +struct zoran_fh; + +struct zoran_mapping { + struct zoran_fh *fh; + atomic_t count; +}; + +struct zoran_buffer { + struct zoran_mapping *map; + enum zoran_buffer_state state; /* state: unused/pending/dma/done */ + struct zoran_sync bs; /* DONE: info to return to application */ + union { + struct { + __le32 *frag_tab; /* addresses of frag table */ + u32 frag_tab_bus; /* same value cached to save time in ISR */ + } jpg; + struct { + char *fbuffer; /* virtual address of frame buffer */ + unsigned long fbuffer_phys;/* physical address of frame buffer */ + unsigned long fbuffer_bus;/* bus address of frame buffer */ + } v4l; + }; +}; + +enum zoran_lock_activity { + ZORAN_FREE, /* free for use */ + ZORAN_ACTIVE, /* active but unlocked */ + ZORAN_LOCKED, /* locked */ +}; + +/* buffer collections */ +struct zoran_buffer_col { + enum zoran_lock_activity active; /* feature currently in use? */ + unsigned int num_buffers, buffer_size; + struct zoran_buffer buffer[MAX_FRAME]; /* buffers */ + u8 allocated; /* Flag if buffers are allocated */ + u8 need_contiguous; /* Flag if contiguous buffers are needed */ + /* only applies to jpg buffers, raw buffers are always contiguous */ +}; + +struct zoran; + +/* zoran_fh contains per-open() settings */ +struct zoran_fh { + struct zoran *zr; + + enum zoran_map_mode map_mode; /* Flag which bufferset will map by next mmap() */ + + struct zoran_overlay_settings overlay_settings; + u32 *overlay_mask; /* overlay mask */ + enum zoran_lock_activity overlay_active;/* feature currently in use? */ + + struct zoran_buffer_col buffers; /* buffers' info */ + + struct zoran_v4l_settings v4l_settings; /* structure with a lot of things to play with */ + struct zoran_jpg_settings jpg_settings; /* structure with a lot of things to play with */ +}; + +struct card_info { + enum card_type type; + char name[32]; + const char *i2c_decoder; /* i2c decoder device */ + const unsigned short *addrs_decoder; + const char *i2c_encoder; /* i2c encoder device */ + const unsigned short *addrs_encoder; + u16 video_vfe, video_codec; /* videocodec types */ + u16 audio_chip; /* audio type */ + + int inputs; /* number of video inputs */ + struct input { + int muxsel; + char name[32]; + } input[BUZ_MAX_INPUT]; + + v4l2_std_id norms; + struct tvnorm *tvn[3]; /* supported TV norms */ + + u32 jpeg_int; /* JPEG interrupt */ + u32 vsync_int; /* VSYNC interrupt */ + s8 gpio[ZR_GPIO_MAX]; + u8 gpcs[GPCS_MAX]; + + struct vfe_polarity vfe_pol; + u8 gpio_pol[ZR_GPIO_MAX]; + + /* is the /GWS line connected? */ + u8 gws_not_connected; + + /* avs6eyes mux setting */ + u8 input_mux; + + void (*init) (struct zoran * zr); +}; + +struct zoran { + struct v4l2_device v4l2_dev; + struct video_device *video_dev; + + struct i2c_adapter i2c_adapter; /* */ + struct i2c_algo_bit_data i2c_algo; /* */ + u32 i2cbr; + + struct v4l2_subdev *decoder; /* video decoder sub-device */ + struct v4l2_subdev *encoder; /* video encoder sub-device */ + + struct videocodec *codec; /* video codec */ + struct videocodec *vfe; /* video front end */ + + struct mutex resource_lock; /* prevent evil stuff */ + struct mutex other_lock; /* please merge with above */ + + u8 initialized; /* flag if zoran has been correctly initialized */ + int user; /* number of current users */ + struct card_info card; + struct tvnorm *timing; + + unsigned short id; /* number of this device */ + char name[32]; /* name of this device */ + struct pci_dev *pci_dev; /* PCI device */ + unsigned char revision; /* revision of zr36057 */ + unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */ + + spinlock_t spinlock; /* Spinlock */ + + /* Video for Linux parameters */ + int input; /* card's norm and input */ + v4l2_std_id norm; + + /* Current buffer params */ + void *vbuf_base; + int vbuf_height, vbuf_width; + int vbuf_depth; + int vbuf_bytesperline; + + struct zoran_overlay_settings overlay_settings; + u32 *overlay_mask; /* overlay mask */ + enum zoran_lock_activity overlay_active; /* feature currently in use? */ + + wait_queue_head_t v4l_capq; + + int v4l_overlay_active; /* Overlay grab is activated */ + int v4l_memgrab_active; /* Memory grab is activated */ + + int v4l_grab_frame; /* Frame number being currently grabbed */ +#define NO_GRAB_ACTIVE (-1) + unsigned long v4l_grab_seq; /* Number of frames grabbed */ + struct zoran_v4l_settings v4l_settings; /* structure with a lot of things to play with */ + + /* V4L grab queue of frames pending */ + unsigned long v4l_pend_head; + unsigned long v4l_pend_tail; + unsigned long v4l_sync_tail; + int v4l_pend[V4L_MAX_FRAME]; + struct zoran_buffer_col v4l_buffers; /* V4L buffers' info */ + + /* Buz MJPEG parameters */ + enum zoran_codec_mode codec_mode; /* status of codec */ + struct zoran_jpg_settings jpg_settings; /* structure with a lot of things to play with */ + + wait_queue_head_t jpg_capq; /* wait here for grab to finish */ + + /* grab queue counts/indices, mask with BUZ_MASK_STAT_COM before using as index */ + /* (dma_head - dma_tail) is number active in DMA, must be <= BUZ_NUM_STAT_COM */ + /* (value & BUZ_MASK_STAT_COM) corresponds to index in stat_com table */ + unsigned long jpg_que_head; /* Index where to put next buffer which is queued */ + unsigned long jpg_dma_head; /* Index of next buffer which goes into stat_com */ + unsigned long jpg_dma_tail; /* Index of last buffer in stat_com */ + unsigned long jpg_que_tail; /* Index of last buffer in queue */ + unsigned long jpg_seq_num; /* count of frames since grab/play started */ + unsigned long jpg_err_seq; /* last seq_num before error */ + unsigned long jpg_err_shift; + unsigned long jpg_queued_num; /* count of frames queued since grab/play started */ + + /* zr36057's code buffer table */ + __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ + + /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */ + int jpg_pend[BUZ_MAX_FRAME]; + + /* array indexed by frame number */ + struct zoran_buffer_col jpg_buffers; /* MJPEG buffers' info */ + + /* Additional stuff for testing */ +#ifdef CONFIG_PROC_FS + struct proc_dir_entry *zoran_proc; +#else + void *zoran_proc; +#endif + int testing; + int jpeg_error; + int intr_counter_GIRQ1; + int intr_counter_GIRQ0; + int intr_counter_CodRepIRQ; + int intr_counter_JPEGRepIRQ; + int field_counter; + int IRQ1_in; + int IRQ1_out; + int JPEG_in; + int JPEG_out; + int JPEG_0; + int JPEG_1; + int END_event_missed; + int JPEG_missed; + int JPEG_error; + int num_errors; + int JPEG_max_missed; + int JPEG_min_missed; + + u32 last_isr; + unsigned long frame_num; + + wait_queue_head_t test_q; +}; + +static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct zoran, v4l2_dev); +} + +/* There was something called _ALPHA_BUZ that used the PCI address instead of + * the kernel iomapped address for btread/btwrite. */ +#define btwrite(dat,adr) writel((dat), zr->zr36057_mem+(adr)) +#define btread(adr) readl(zr->zr36057_mem+(adr)) + +#define btand(dat,adr) btwrite((dat) & btread(adr), adr) +#define btor(dat,adr) btwrite((dat) | btread(adr), adr) +#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) + +#endif diff --git a/drivers/media/pci/zoran/zoran_card.c b/drivers/media/pci/zoran/zoran_card.c new file mode 100644 index 00000000..bb53d248 --- /dev/null +++ b/drivers/media/pci/zoran/zoran_card.c @@ -0,0 +1,1523 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles card-specific data and detection + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "videocodec.h" +#include "zoran.h" +#include "zoran_card.h" +#include "zoran_device.h" +#include "zoran_procfs.h" + +extern const struct zoran_format zoran_formats[]; + +static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "Card type"); + +/* + The video mem address of the video card. + The driver has a little database for some videocards + to determine it from there. If your video card is not in there + you have either to give it to the driver as a parameter + or set in in a VIDIOCSFBUF ioctl + */ + +static unsigned long vidmem; /* default = 0 - Video memory base address */ +module_param(vidmem, ulong, 0444); +MODULE_PARM_DESC(vidmem, "Default video memory base address"); + +/* + Default input and video norm at startup of the driver. +*/ + +static unsigned int default_input; /* default 0 = Composite, 1 = S-Video */ +module_param(default_input, uint, 0444); +MODULE_PARM_DESC(default_input, + "Default input (0=Composite, 1=S-Video, 2=Internal)"); + +static int default_mux = 1; /* 6 Eyes input selection */ +module_param(default_mux, int, 0644); +MODULE_PARM_DESC(default_mux, + "Default 6 Eyes mux setting (Input selection)"); + +static int default_norm; /* default 0 = PAL, 1 = NTSC 2 = SECAM */ +module_param(default_norm, int, 0444); +MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); + +/* /dev/videoN, -1 for autodetect */ +static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; +module_param_array(video_nr, int, NULL, 0444); +MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)"); + +int v4l_nbufs = 4; +int v4l_bufsize = 864; /* Everybody should be able to work with this setting */ +module_param(v4l_nbufs, int, 0644); +MODULE_PARM_DESC(v4l_nbufs, "Maximum number of V4L buffers to use"); +module_param(v4l_bufsize, int, 0644); +MODULE_PARM_DESC(v4l_bufsize, "Maximum size per V4L buffer (in kB)"); + +int jpg_nbufs = 32; +int jpg_bufsize = 512; /* max size for 100% quality full-PAL frame */ +module_param(jpg_nbufs, int, 0644); +MODULE_PARM_DESC(jpg_nbufs, "Maximum number of JPG buffers to use"); +module_param(jpg_bufsize, int, 0644); +MODULE_PARM_DESC(jpg_bufsize, "Maximum size per JPG buffer (in kB)"); + +int pass_through = 0; /* 1=Pass through TV signal when device is not used */ + /* 0=Show color bar when device is not used (LML33: only if lml33dpath=1) */ +module_param(pass_through, int, 0644); +MODULE_PARM_DESC(pass_through, + "Pass TV signal through to TV-out when idling"); + +int zr36067_debug = 1; +module_param_named(debug, zr36067_debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-5)"); + +#define ZORAN_VERSION "0.10.1" + +MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); +MODULE_AUTHOR("Serguei Miridonov"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ZORAN_VERSION); + +#define ZR_DEVICE(subven, subdev, data) { \ + .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \ + .subvendor = (subven), .subdevice = (subdev), .driver_data = (data) } + +static struct pci_device_id zr36067_pci_tbl[] = { + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus), + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus), + ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10), + ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ), + ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS), + {0} +}; +MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); + +static unsigned int zoran_num; /* number of cards found */ + +/* videocodec bus functions ZR36060 */ +static u32 +zr36060_read (struct videocodec *codec, + u16 reg) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + __u32 data; + + if (post_office_wait(zr) + || post_office_write(zr, 0, 1, reg >> 8) + || post_office_write(zr, 0, 2, reg & 0xff)) { + return -1; + } + + data = post_office_read(zr, 0, 3) & 0xff; + return data; +} + +static void +zr36060_write (struct videocodec *codec, + u16 reg, + u32 val) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + + if (post_office_wait(zr) + || post_office_write(zr, 0, 1, reg >> 8) + || post_office_write(zr, 0, 2, reg & 0xff)) { + return; + } + + post_office_write(zr, 0, 3, val & 0xff); +} + +/* videocodec bus functions ZR36050 */ +static u32 +zr36050_read (struct videocodec *codec, + u16 reg) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + __u32 data; + + if (post_office_wait(zr) + || post_office_write(zr, 1, 0, reg >> 2)) { // reg. HIGHBYTES + return -1; + } + + data = post_office_read(zr, 0, reg & 0x03) & 0xff; // reg. LOWBYTES + read + return data; +} + +static void +zr36050_write (struct videocodec *codec, + u16 reg, + u32 val) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + + if (post_office_wait(zr) + || post_office_write(zr, 1, 0, reg >> 2)) { // reg. HIGHBYTES + return; + } + + post_office_write(zr, 0, reg & 0x03, val & 0xff); // reg. LOWBYTES + wr. data +} + +/* videocodec bus functions ZR36016 */ +static u32 +zr36016_read (struct videocodec *codec, + u16 reg) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + __u32 data; + + if (post_office_wait(zr)) { + return -1; + } + + data = post_office_read(zr, 2, reg & 0x03) & 0xff; // read + return data; +} + +/* hack for in zoran_device.c */ +void +zr36016_write (struct videocodec *codec, + u16 reg, + u32 val) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + + if (post_office_wait(zr)) { + return; + } + + post_office_write(zr, 2, reg & 0x03, val & 0x0ff); // wr. data +} + +/* + * Board specific information + */ + +static void +dc10_init (struct zoran *zr) +{ + dprintk(3, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__); + + /* Pixel clock selection */ + GPIO(zr, 4, 0); + GPIO(zr, 5, 1); + /* Enable the video bus sync signals */ + GPIO(zr, 7, 0); +} + +static void +dc10plus_init (struct zoran *zr) +{ + dprintk(3, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__); +} + +static void +buz_init (struct zoran *zr) +{ + dprintk(3, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__); + + /* some stuff from Iomega */ + pci_write_config_dword(zr->pci_dev, 0xfc, 0x90680f15); + pci_write_config_dword(zr->pci_dev, 0x0c, 0x00012020); + pci_write_config_dword(zr->pci_dev, 0xe8, 0xc0200000); +} + +static void +lml33_init (struct zoran *zr) +{ + dprintk(3, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__); + + GPIO(zr, 2, 1); // Set Composite input/output +} + +static void +avs6eyes_init (struct zoran *zr) +{ + // AverMedia 6-Eyes original driver by Christer Weinigel + + // Lifted straight from Christer's old driver and + // modified slightly by Martin Samuelsson. + + int mux = default_mux; /* 1 = BT866, 7 = VID1 */ + + GPIO(zr, 4, 1); /* Bt866 SLEEP on */ + udelay(2); + + GPIO(zr, 0, 1); /* ZR36060 /RESET on */ + GPIO(zr, 1, 0); /* ZR36060 /SLEEP on */ + GPIO(zr, 2, mux & 1); /* MUX S0 */ + GPIO(zr, 3, 0); /* /FRAME on */ + GPIO(zr, 4, 0); /* Bt866 SLEEP off */ + GPIO(zr, 5, mux & 2); /* MUX S1 */ + GPIO(zr, 6, 0); /* ? */ + GPIO(zr, 7, mux & 4); /* MUX S2 */ + +} + +static char * +codecid_to_modulename (u16 codecid) +{ + char *name = NULL; + + switch (codecid) { + case CODEC_TYPE_ZR36060: + name = "zr36060"; + break; + case CODEC_TYPE_ZR36050: + name = "zr36050"; + break; + case CODEC_TYPE_ZR36016: + name = "zr36016"; + break; + } + + return name; +} + +// struct tvnorm { +// u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart; +// }; + +static struct tvnorm f50sqpixel = { 944, 768, 83, 880, 625, 576, 16 }; +static struct tvnorm f60sqpixel = { 780, 640, 51, 716, 525, 480, 12 }; +static struct tvnorm f50ccir601 = { 864, 720, 75, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601 = { 858, 720, 57, 788, 525, 480, 16 }; + +static struct tvnorm f50ccir601_lml33 = { 864, 720, 75+34, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601_lml33 = { 858, 720, 57+34, 788, 525, 480, 16 }; + +/* The DC10 (57/16/50) uses VActive as HSync, so HStart must be 0 */ +static struct tvnorm f50sqpixel_dc10 = { 944, 768, 0, 880, 625, 576, 0 }; +static struct tvnorm f60sqpixel_dc10 = { 780, 640, 0, 716, 525, 480, 12 }; + +/* FIXME: I cannot swap U and V in saa7114, so i do one + * pixel left shift in zoran (75 -> 74) + * (Maxim Yevtyushkin ) */ +static struct tvnorm f50ccir601_lm33r10 = { 864, 720, 74+54, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601_lm33r10 = { 858, 720, 56+54, 788, 525, 480, 16 }; + +/* FIXME: The ks0127 seem incapable of swapping U and V, too, which is why I + * copy Maxim's left shift hack for the 6 Eyes. + * + * Christer's driver used the unshifted norms, though... + * /Sam */ +static struct tvnorm f50ccir601_avs6eyes = { 864, 720, 74, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601_avs6eyes = { 858, 720, 56, 788, 525, 480, 16 }; + +static const unsigned short vpx3220_addrs[] = { 0x43, 0x47, I2C_CLIENT_END }; +static const unsigned short saa7110_addrs[] = { 0x4e, 0x4f, I2C_CLIENT_END }; +static const unsigned short saa7111_addrs[] = { 0x25, 0x24, I2C_CLIENT_END }; +static const unsigned short saa7114_addrs[] = { 0x21, 0x20, I2C_CLIENT_END }; +static const unsigned short adv717x_addrs[] = { 0x6a, 0x6b, 0x2a, 0x2b, I2C_CLIENT_END }; +static const unsigned short ks0127_addrs[] = { 0x6c, 0x6d, I2C_CLIENT_END }; +static const unsigned short saa7185_addrs[] = { 0x44, I2C_CLIENT_END }; +static const unsigned short bt819_addrs[] = { 0x45, I2C_CLIENT_END }; +static const unsigned short bt856_addrs[] = { 0x44, I2C_CLIENT_END }; +static const unsigned short bt866_addrs[] = { 0x44, I2C_CLIENT_END }; + +static struct card_info zoran_cards[NUM_CARDS] = { + { + .type = DC10_old, + .name = "DC10(old)", + .i2c_decoder = "vpx3220a", + .addrs_decoder = vpx3220_addrs, + .video_codec = CODEC_TYPE_ZR36050, + .video_vfe = CODEC_TYPE_ZR36016, + + .inputs = 3, + .input = { + { 1, "Composite" }, + { 2, "S-Video" }, + { 0, "Internal/comp" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, + .tvn = { + &f50sqpixel_dc10, + &f60sqpixel_dc10, + &f50sqpixel_dc10 + }, + .jpeg_int = 0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, + .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, + .gpcs = { -1, 0 }, + .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10_init, + }, { + .type = DC10_new, + .name = "DC10(new)", + .i2c_decoder = "saa7110", + .addrs_decoder = saa7110_addrs, + .i2c_encoder = "adv7175", + .addrs_encoder = adv717x_addrs, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 3, + .input = { + { 0, "Composite" }, + { 7, "S-Video" }, + { 5, "Internal/comp" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, + .tvn = { + &f50sqpixel, + &f60sqpixel, + &f50sqpixel}, + .jpeg_int = ZR36057_ISR_GIRQ0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 }, + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gpcs = { -1, 1}, + .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10plus_init, + }, { + .type = DC10plus, + .name = "DC10plus", + .i2c_decoder = "saa7110", + .addrs_decoder = saa7110_addrs, + .i2c_encoder = "adv7175", + .addrs_encoder = adv717x_addrs, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 3, + .input = { + { 0, "Composite" }, + { 7, "S-Video" }, + { 5, "Internal/comp" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, + .tvn = { + &f50sqpixel, + &f60sqpixel, + &f50sqpixel + }, + .jpeg_int = ZR36057_ISR_GIRQ0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 }, + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gpcs = { -1, 1 }, + .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10plus_init, + }, { + .type = DC30, + .name = "DC30", + .i2c_decoder = "vpx3220a", + .addrs_decoder = vpx3220_addrs, + .i2c_encoder = "adv7175", + .addrs_encoder = adv717x_addrs, + .video_codec = CODEC_TYPE_ZR36050, + .video_vfe = CODEC_TYPE_ZR36016, + + .inputs = 3, + .input = { + { 1, "Composite" }, + { 2, "S-Video" }, + { 0, "Internal/comp" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, + .tvn = { + &f50sqpixel_dc10, + &f60sqpixel_dc10, + &f50sqpixel_dc10 + }, + .jpeg_int = 0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, + .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, + .gpcs = { -1, 0 }, + .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10_init, + }, { + .type = DC30plus, + .name = "DC30plus", + .i2c_decoder = "vpx3220a", + .addrs_decoder = vpx3220_addrs, + .i2c_encoder = "adv7175", + .addrs_encoder = adv717x_addrs, + .video_codec = CODEC_TYPE_ZR36050, + .video_vfe = CODEC_TYPE_ZR36016, + + .inputs = 3, + .input = { + { 1, "Composite" }, + { 2, "S-Video" }, + { 0, "Internal/comp" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, + .tvn = { + &f50sqpixel_dc10, + &f60sqpixel_dc10, + &f50sqpixel_dc10 + }, + .jpeg_int = 0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, + .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, + .gpcs = { -1, 0 }, + .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10_init, + }, { + .type = LML33, + .name = "LML33", + .i2c_decoder = "bt819a", + .addrs_decoder = bt819_addrs, + .i2c_encoder = "bt856", + .addrs_encoder = bt856_addrs, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 2, + .input = { + { 0, "Composite" }, + { 7, "S-Video" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL, + .tvn = { + &f50ccir601_lml33, + &f60ccir601_lml33, + NULL + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 }, + .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 }, + .gpcs = { 3, 1 }, + .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, + .gws_not_connected = 1, + .input_mux = 0, + .init = &lml33_init, + }, { + .type = LML33R10, + .name = "LML33R10", + .i2c_decoder = "saa7114", + .addrs_decoder = saa7114_addrs, + .i2c_encoder = "adv7170", + .addrs_encoder = adv717x_addrs, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 2, + .input = { + { 0, "Composite" }, + { 7, "S-Video" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL, + .tvn = { + &f50ccir601_lm33r10, + &f60ccir601_lm33r10, + NULL + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 }, + .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 }, + .gpcs = { 3, 1 }, + .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, + .gws_not_connected = 1, + .input_mux = 0, + .init = &lml33_init, + }, { + .type = BUZ, + .name = "Buz", + .i2c_decoder = "saa7111", + .addrs_decoder = saa7111_addrs, + .i2c_encoder = "saa7185", + .addrs_encoder = saa7185_addrs, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 2, + .input = { + { 3, "Composite" }, + { 7, "S-Video" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, + .tvn = { + &f50ccir601, + &f60ccir601, + &f50ccir601 + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, -1, 3, -1, -1, -1, -1, -1 }, + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gpcs = { 3, 1 }, + .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, + .gws_not_connected = 1, + .input_mux = 0, + .init = &buz_init, + }, { + .type = AVS6EYES, + .name = "6-Eyes", + /* AverMedia chose not to brand the 6-Eyes. Thus it + can't be autodetected, and requires card=x. */ + .i2c_decoder = "ks0127", + .addrs_decoder = ks0127_addrs, + .i2c_encoder = "bt866", + .addrs_encoder = bt866_addrs, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 10, + .input = { + { 0, "Composite 1" }, + { 1, "Composite 2" }, + { 2, "Composite 3" }, + { 4, "Composite 4" }, + { 5, "Composite 5" }, + { 6, "Composite 6" }, + { 8, "S-Video 1" }, + { 9, "S-Video 2" }, + {10, "S-Video 3" }, + {15, "YCbCr" } + }, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL, + .tvn = { + &f50ccir601_avs6eyes, + &f60ccir601_avs6eyes, + NULL + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, 0, 3, -1, -1, -1, -1, -1 },// Validity unknown /Sam + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, // Validity unknown /Sam + .gpcs = { 3, 1 }, // Validity unknown /Sam + .vfe_pol = { 1, 0, 0, 0, 0, 1, 0, 0 }, // Validity unknown /Sam + .gws_not_connected = 1, + .input_mux = 1, + .init = &avs6eyes_init, + } + +}; + +/* + * I2C functions + */ +/* software I2C functions */ +static int +zoran_i2c_getsda (void *data) +{ + struct zoran *zr = (struct zoran *) data; + + return (btread(ZR36057_I2CBR) >> 1) & 1; +} + +static int +zoran_i2c_getscl (void *data) +{ + struct zoran *zr = (struct zoran *) data; + + return btread(ZR36057_I2CBR) & 1; +} + +static void +zoran_i2c_setsda (void *data, + int state) +{ + struct zoran *zr = (struct zoran *) data; + + if (state) + zr->i2cbr |= 2; + else + zr->i2cbr &= ~2; + btwrite(zr->i2cbr, ZR36057_I2CBR); +} + +static void +zoran_i2c_setscl (void *data, + int state) +{ + struct zoran *zr = (struct zoran *) data; + + if (state) + zr->i2cbr |= 1; + else + zr->i2cbr &= ~1; + btwrite(zr->i2cbr, ZR36057_I2CBR); +} + +static const struct i2c_algo_bit_data zoran_i2c_bit_data_template = { + .setsda = zoran_i2c_setsda, + .setscl = zoran_i2c_setscl, + .getsda = zoran_i2c_getsda, + .getscl = zoran_i2c_getscl, + .udelay = 10, + .timeout = 100, +}; + +static int +zoran_register_i2c (struct zoran *zr) +{ + zr->i2c_algo = zoran_i2c_bit_data_template; + zr->i2c_algo.data = zr; + strlcpy(zr->i2c_adapter.name, ZR_DEVNAME(zr), + sizeof(zr->i2c_adapter.name)); + i2c_set_adapdata(&zr->i2c_adapter, &zr->v4l2_dev); + zr->i2c_adapter.algo_data = &zr->i2c_algo; + zr->i2c_adapter.dev.parent = &zr->pci_dev->dev; + return i2c_bit_add_bus(&zr->i2c_adapter); +} + +static void +zoran_unregister_i2c (struct zoran *zr) +{ + i2c_del_adapter(&zr->i2c_adapter); +} + +/* Check a zoran_params struct for correctness, insert default params */ + +int +zoran_check_jpg_settings (struct zoran *zr, + struct zoran_jpg_settings *settings, + int try) +{ + int err = 0, err0 = 0; + + dprintk(4, + KERN_DEBUG + "%s: %s - dec: %d, Hdcm: %d, Vdcm: %d, Tdcm: %d\n", + ZR_DEVNAME(zr), __func__, settings->decimation, settings->HorDcm, + settings->VerDcm, settings->TmpDcm); + dprintk(4, + KERN_DEBUG + "%s: %s - x: %d, y: %d, w: %d, y: %d\n", + ZR_DEVNAME(zr), __func__, settings->img_x, settings->img_y, + settings->img_width, settings->img_height); + /* Check decimation, set default values for decimation = 1, 2, 4 */ + switch (settings->decimation) { + case 1: + + settings->HorDcm = 1; + settings->VerDcm = 1; + settings->TmpDcm = 1; + settings->field_per_buff = 2; + settings->img_x = 0; + settings->img_y = 0; + settings->img_width = BUZ_MAX_WIDTH; + settings->img_height = BUZ_MAX_HEIGHT / 2; + break; + case 2: + + settings->HorDcm = 2; + settings->VerDcm = 1; + settings->TmpDcm = 2; + settings->field_per_buff = 1; + settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; + settings->img_y = 0; + settings->img_width = + (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; + settings->img_height = BUZ_MAX_HEIGHT / 2; + break; + case 4: + + if (zr->card.type == DC10_new) { + dprintk(1, + KERN_DEBUG + "%s: %s - HDec by 4 is not supported on the DC10\n", + ZR_DEVNAME(zr), __func__); + err0++; + break; + } + + settings->HorDcm = 4; + settings->VerDcm = 2; + settings->TmpDcm = 2; + settings->field_per_buff = 1; + settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; + settings->img_y = 0; + settings->img_width = + (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; + settings->img_height = BUZ_MAX_HEIGHT / 2; + break; + case 0: + + /* We have to check the data the user has set */ + + if (settings->HorDcm != 1 && settings->HorDcm != 2 && + (zr->card.type == DC10_new || settings->HorDcm != 4)) { + settings->HorDcm = clamp(settings->HorDcm, 1, 2); + err0++; + } + if (settings->VerDcm != 1 && settings->VerDcm != 2) { + settings->VerDcm = clamp(settings->VerDcm, 1, 2); + err0++; + } + if (settings->TmpDcm != 1 && settings->TmpDcm != 2) { + settings->TmpDcm = clamp(settings->TmpDcm, 1, 2); + err0++; + } + if (settings->field_per_buff != 1 && + settings->field_per_buff != 2) { + settings->field_per_buff = clamp(settings->field_per_buff, 1, 2); + err0++; + } + if (settings->img_x < 0) { + settings->img_x = 0; + err0++; + } + if (settings->img_y < 0) { + settings->img_y = 0; + err0++; + } + if (settings->img_width < 0 || settings->img_width > BUZ_MAX_WIDTH) { + settings->img_width = clamp(settings->img_width, 0, (int)BUZ_MAX_WIDTH); + err0++; + } + if (settings->img_height < 0 || settings->img_height > BUZ_MAX_HEIGHT / 2) { + settings->img_height = clamp(settings->img_height, 0, BUZ_MAX_HEIGHT / 2); + err0++; + } + if (settings->img_x + settings->img_width > BUZ_MAX_WIDTH) { + settings->img_x = BUZ_MAX_WIDTH - settings->img_width; + err0++; + } + if (settings->img_y + settings->img_height > BUZ_MAX_HEIGHT / 2) { + settings->img_y = BUZ_MAX_HEIGHT / 2 - settings->img_height; + err0++; + } + if (settings->img_width % (16 * settings->HorDcm) != 0) { + settings->img_width -= settings->img_width % (16 * settings->HorDcm); + if (settings->img_width == 0) + settings->img_width = 16 * settings->HorDcm; + err0++; + } + if (settings->img_height % (8 * settings->VerDcm) != 0) { + settings->img_height -= settings->img_height % (8 * settings->VerDcm); + if (settings->img_height == 0) + settings->img_height = 8 * settings->VerDcm; + err0++; + } + + if (!try && err0) { + dprintk(1, + KERN_ERR + "%s: %s - error in params for decimation = 0\n", + ZR_DEVNAME(zr), __func__); + err++; + } + break; + default: + dprintk(1, + KERN_ERR + "%s: %s - decimation = %d, must be 0, 1, 2 or 4\n", + ZR_DEVNAME(zr), __func__, settings->decimation); + err++; + break; + } + + if (settings->jpg_comp.quality > 100) + settings->jpg_comp.quality = 100; + if (settings->jpg_comp.quality < 5) + settings->jpg_comp.quality = 5; + if (settings->jpg_comp.APPn < 0) + settings->jpg_comp.APPn = 0; + if (settings->jpg_comp.APPn > 15) + settings->jpg_comp.APPn = 15; + if (settings->jpg_comp.APP_len < 0) + settings->jpg_comp.APP_len = 0; + if (settings->jpg_comp.APP_len > 60) + settings->jpg_comp.APP_len = 60; + if (settings->jpg_comp.COM_len < 0) + settings->jpg_comp.COM_len = 0; + if (settings->jpg_comp.COM_len > 60) + settings->jpg_comp.COM_len = 60; + if (err) + return -EINVAL; + return 0; +} + +void +zoran_open_init_params (struct zoran *zr) +{ + int i; + + /* User must explicitly set a window */ + zr->overlay_settings.is_set = 0; + zr->overlay_mask = NULL; + zr->overlay_active = ZORAN_FREE; + + zr->v4l_memgrab_active = 0; + zr->v4l_overlay_active = 0; + zr->v4l_grab_frame = NO_GRAB_ACTIVE; + zr->v4l_grab_seq = 0; + zr->v4l_settings.width = 192; + zr->v4l_settings.height = 144; + zr->v4l_settings.format = &zoran_formats[7]; /* YUY2 - YUV-4:2:2 packed */ + zr->v4l_settings.bytesperline = + zr->v4l_settings.width * + ((zr->v4l_settings.format->depth + 7) / 8); + + /* DMA ring stuff for V4L */ + zr->v4l_pend_tail = 0; + zr->v4l_pend_head = 0; + zr->v4l_sync_tail = 0; + zr->v4l_buffers.active = ZORAN_FREE; + for (i = 0; i < VIDEO_MAX_FRAME; i++) { + zr->v4l_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + } + zr->v4l_buffers.allocated = 0; + + for (i = 0; i < BUZ_MAX_FRAME; i++) { + zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + } + zr->jpg_buffers.active = ZORAN_FREE; + zr->jpg_buffers.allocated = 0; + /* Set necessary params and call zoran_check_jpg_settings to set the defaults */ + zr->jpg_settings.decimation = 1; + zr->jpg_settings.jpg_comp.quality = 50; /* default compression factor 8 */ + if (zr->card.type != BUZ) + zr->jpg_settings.odd_even = 1; + else + zr->jpg_settings.odd_even = 0; + zr->jpg_settings.jpg_comp.APPn = 0; + zr->jpg_settings.jpg_comp.APP_len = 0; /* No APPn marker */ + memset(zr->jpg_settings.jpg_comp.APP_data, 0, + sizeof(zr->jpg_settings.jpg_comp.APP_data)); + zr->jpg_settings.jpg_comp.COM_len = 0; /* No COM marker */ + memset(zr->jpg_settings.jpg_comp.COM_data, 0, + sizeof(zr->jpg_settings.jpg_comp.COM_data)); + zr->jpg_settings.jpg_comp.jpeg_markers = + V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT; + i = zoran_check_jpg_settings(zr, &zr->jpg_settings, 0); + if (i) + dprintk(1, KERN_ERR "%s: %s internal error\n", + ZR_DEVNAME(zr), __func__); + + clear_interrupt_counters(zr); + zr->testing = 0; +} + +static void test_interrupts (struct zoran *zr) +{ + DEFINE_WAIT(wait); + int timeout, icr; + + clear_interrupt_counters(zr); + + zr->testing = 1; + icr = btread(ZR36057_ICR); + btwrite(0x78000000 | ZR36057_ICR_IntPinEn, ZR36057_ICR); + prepare_to_wait(&zr->test_q, &wait, TASK_INTERRUPTIBLE); + timeout = schedule_timeout(HZ); + finish_wait(&zr->test_q, &wait); + btwrite(0, ZR36057_ICR); + btwrite(0x78000000, ZR36057_ISR); + zr->testing = 0; + dprintk(5, KERN_INFO "%s: Testing interrupts...\n", ZR_DEVNAME(zr)); + if (timeout) { + dprintk(1, ": time spent: %d\n", 1 * HZ - timeout); + } + if (zr36067_debug > 1) + print_interrupts(zr); + btwrite(icr, ZR36057_ICR); +} + +static int zr36057_init (struct zoran *zr) +{ + int j, err; + + dprintk(1, + KERN_INFO + "%s: %s - initializing card[%d], zr=%p\n", + ZR_DEVNAME(zr), __func__, zr->id, zr); + + /* default setup of all parameters which will persist between opens */ + zr->user = 0; + + init_waitqueue_head(&zr->v4l_capq); + init_waitqueue_head(&zr->jpg_capq); + init_waitqueue_head(&zr->test_q); + zr->jpg_buffers.allocated = 0; + zr->v4l_buffers.allocated = 0; + + zr->vbuf_base = (void *) vidmem; + zr->vbuf_width = 0; + zr->vbuf_height = 0; + zr->vbuf_depth = 0; + zr->vbuf_bytesperline = 0; + + /* Avoid nonsense settings from user for default input/norm */ + if (default_norm < 0 || default_norm > 2) + default_norm = 0; + if (default_norm == 0) { + zr->norm = V4L2_STD_PAL; + zr->timing = zr->card.tvn[0]; + } else if (default_norm == 1) { + zr->norm = V4L2_STD_NTSC; + zr->timing = zr->card.tvn[1]; + } else { + zr->norm = V4L2_STD_SECAM; + zr->timing = zr->card.tvn[2]; + } + if (zr->timing == NULL) { + dprintk(1, + KERN_WARNING + "%s: %s - default TV standard not supported by hardware. PAL will be used.\n", + ZR_DEVNAME(zr), __func__); + zr->norm = V4L2_STD_PAL; + zr->timing = zr->card.tvn[0]; + } + + if (default_input > zr->card.inputs-1) { + dprintk(1, + KERN_WARNING + "%s: default_input value %d out of range (0-%d)\n", + ZR_DEVNAME(zr), default_input, zr->card.inputs-1); + default_input = 0; + } + zr->input = default_input; + + /* default setup (will be repeated at every open) */ + zoran_open_init_params(zr); + + /* allocate memory *before* doing anything to the hardware + * in case allocation fails */ + zr->stat_com = kzalloc(BUZ_NUM_STAT_COM * 4, GFP_KERNEL); + zr->video_dev = video_device_alloc(); + if (!zr->stat_com || !zr->video_dev) { + dprintk(1, + KERN_ERR + "%s: %s - kmalloc (STAT_COM) failed\n", + ZR_DEVNAME(zr), __func__); + err = -ENOMEM; + goto exit_free; + } + for (j = 0; j < BUZ_NUM_STAT_COM; j++) { + zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */ + } + + /* + * Now add the template and register the device unit. + */ + memcpy(zr->video_dev, &zoran_template, sizeof(zoran_template)); + zr->video_dev->parent = &zr->pci_dev->dev; + strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); + /* It's not a mem2mem device, but you can both capture and output from + one and the same device. This should really be split up into two + device nodes, but that's a job for another day. */ + zr->video_dev->vfl_dir = VFL_DIR_M2M; + err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); + if (err < 0) + goto exit_free; + video_set_drvdata(zr->video_dev, zr); + + zoran_init_hardware(zr); + if (zr36067_debug > 2) + detect_guest_activity(zr); + test_interrupts(zr); + if (!pass_through) { + decoder_call(zr, video, s_stream, 0); + encoder_call(zr, video, s_routing, 2, 0, 0); + } + + zr->zoran_proc = NULL; + zr->initialized = 1; + return 0; + +exit_free: + kfree(zr->stat_com); + kfree(zr->video_dev); + return err; +} + +static void zoran_remove(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct zoran *zr = to_zoran(v4l2_dev); + + if (!zr->initialized) + goto exit_free; + + /* unregister videocodec bus */ + if (zr->codec) { + struct videocodec_master *master = zr->codec->master_data; + + videocodec_detach(zr->codec); + kfree(master); + } + if (zr->vfe) { + struct videocodec_master *master = zr->vfe->master_data; + + videocodec_detach(zr->vfe); + kfree(master); + } + + /* unregister i2c bus */ + zoran_unregister_i2c(zr); + /* disable PCI bus-mastering */ + zoran_set_pci_master(zr, 0); + /* put chip into reset */ + btwrite(0, ZR36057_SPGPPCR); + free_irq(zr->pci_dev->irq, zr); + /* unmap and free memory */ + kfree(zr->stat_com); + zoran_proc_cleanup(zr); + iounmap(zr->zr36057_mem); + pci_disable_device(zr->pci_dev); + video_unregister_device(zr->video_dev); +exit_free: + v4l2_device_unregister(&zr->v4l2_dev); + kfree(zr); +} + +void +zoran_vdev_release (struct video_device *vdev) +{ + kfree(vdev); +} + +static struct videocodec_master *zoran_setup_videocodec(struct zoran *zr, + int type) +{ + struct videocodec_master *m = NULL; + + m = kmalloc(sizeof(struct videocodec_master), GFP_KERNEL); + if (!m) { + dprintk(1, KERN_ERR "%s: %s - no memory\n", + ZR_DEVNAME(zr), __func__); + return m; + } + + /* magic and type are unused for master struct. Makes sense only at + codec structs. + In the past, .type were initialized to the old V4L1 .hardware + value, as VID_HARDWARE_ZR36067 + */ + m->magic = 0L; + m->type = 0; + + m->flags = CODEC_FLAG_ENCODER | CODEC_FLAG_DECODER; + strlcpy(m->name, ZR_DEVNAME(zr), sizeof(m->name)); + m->data = zr; + + switch (type) + { + case CODEC_TYPE_ZR36060: + m->readreg = zr36060_read; + m->writereg = zr36060_write; + m->flags |= CODEC_FLAG_JPEG | CODEC_FLAG_VFE; + break; + case CODEC_TYPE_ZR36050: + m->readreg = zr36050_read; + m->writereg = zr36050_write; + m->flags |= CODEC_FLAG_JPEG; + break; + case CODEC_TYPE_ZR36016: + m->readreg = zr36016_read; + m->writereg = zr36016_write; + m->flags |= CODEC_FLAG_VFE; + break; + } + + return m; +} + +static void zoran_subdev_notify(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct zoran *zr = to_zoran(sd->v4l2_dev); + + /* Bt819 needs to reset its FIFO buffer using #FRST pin and + LML33 card uses GPIO(7) for that. */ + if (cmd == BT819_FIFO_RESET_LOW) + GPIO(zr, 7, 0); + else if (cmd == BT819_FIFO_RESET_HIGH) + GPIO(zr, 7, 1); +} + +/* + * Scan for a Buz card (actually for the PCI controller ZR36057), + * request the irq and map the io memory + */ +static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned char latency, need_latency; + struct zoran *zr; + int result; + struct videocodec_master *master_vfe = NULL; + struct videocodec_master *master_codec = NULL; + int card_num; + char *codec_name, *vfe_name; + unsigned int nr; + + + nr = zoran_num++; + if (nr >= BUZ_MAX) { + dprintk(1, KERN_ERR "%s: driver limited to %d card(s) maximum\n", + ZORAN_NAME, BUZ_MAX); + return -ENOENT; + } + + zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); + if (!zr) { + dprintk(1, KERN_ERR "%s: %s - kzalloc failed\n", + ZORAN_NAME, __func__); + return -ENOMEM; + } + zr->v4l2_dev.notify = zoran_subdev_notify; + if (v4l2_device_register(&pdev->dev, &zr->v4l2_dev)) + goto zr_free_mem; + zr->pci_dev = pdev; + zr->id = nr; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); + spin_lock_init(&zr->spinlock); + mutex_init(&zr->resource_lock); + mutex_init(&zr->other_lock); + if (pci_enable_device(pdev)) + goto zr_unreg; + zr->revision = zr->pci_dev->revision; + + dprintk(1, + KERN_INFO + "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n", + ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision, + zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0)); + if (zr->revision >= 2) { + dprintk(1, + KERN_INFO + "%s: Subsystem vendor=0x%04x id=0x%04x\n", + ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor, + zr->pci_dev->subsystem_device); + } + + /* Use auto-detected card type? */ + if (card[nr] == -1) { + if (zr->revision < 2) { + dprintk(1, + KERN_ERR + "%s: No card type specified, please use the card=X module parameter\n", + ZR_DEVNAME(zr)); + dprintk(1, + KERN_ERR + "%s: It is not possible to auto-detect ZR36057 based cards\n", + ZR_DEVNAME(zr)); + goto zr_unreg; + } + + card_num = ent->driver_data; + if (card_num >= NUM_CARDS) { + dprintk(1, + KERN_ERR + "%s: Unknown card, try specifying card=X module parameter\n", + ZR_DEVNAME(zr)); + goto zr_unreg; + } + dprintk(3, + KERN_DEBUG + "%s: %s() - card %s detected\n", + ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name); + } else { + card_num = card[nr]; + if (card_num >= NUM_CARDS || card_num < 0) { + dprintk(1, + KERN_ERR + "%s: User specified card type %d out of range (0 .. %d)\n", + ZR_DEVNAME(zr), card_num, NUM_CARDS - 1); + goto zr_unreg; + } + } + + /* even though we make this a non pointer and thus + * theoretically allow for making changes to this struct + * on a per-individual card basis at runtime, this is + * strongly discouraged. This structure is intended to + * keep general card information, no settings or anything */ + zr->card = zoran_cards[card_num]; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), + "%s[%u]", zr->card.name, zr->id); + + zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0); + if (!zr->zr36057_mem) { + dprintk(1, KERN_ERR "%s: %s() - ioremap failed\n", + ZR_DEVNAME(zr), __func__); + goto zr_unreg; + } + + result = request_irq(zr->pci_dev->irq, zoran_irq, + IRQF_SHARED | IRQF_DISABLED, ZR_DEVNAME(zr), zr); + if (result < 0) { + if (result == -EINVAL) { + dprintk(1, + KERN_ERR + "%s: %s - bad irq number or handler\n", + ZR_DEVNAME(zr), __func__); + } else if (result == -EBUSY) { + dprintk(1, + KERN_ERR + "%s: %s - IRQ %d busy, change your PnP config in BIOS\n", + ZR_DEVNAME(zr), __func__, zr->pci_dev->irq); + } else { + dprintk(1, + KERN_ERR + "%s: %s - can't assign irq, error code %d\n", + ZR_DEVNAME(zr), __func__, result); + } + goto zr_unmap; + } + + /* set PCI latency timer */ + pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + &latency); + need_latency = zr->revision > 1 ? 32 : 48; + if (latency != need_latency) { + dprintk(2, KERN_INFO "%s: Changing PCI latency from %d to %d\n", + ZR_DEVNAME(zr), latency, need_latency); + pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + need_latency); + } + + zr36057_restart(zr); + /* i2c */ + dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", + ZR_DEVNAME(zr)); + + if (zoran_register_i2c(zr) < 0) { + dprintk(1, KERN_ERR "%s: %s - can't initialize i2c bus\n", + ZR_DEVNAME(zr), __func__); + goto zr_free_irq; + } + + zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev, + &zr->i2c_adapter, zr->card.i2c_decoder, + 0, zr->card.addrs_decoder); + + if (zr->card.i2c_encoder) + zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev, + &zr->i2c_adapter, zr->card.i2c_encoder, + 0, zr->card.addrs_encoder); + + dprintk(2, + KERN_INFO "%s: Initializing videocodec bus...\n", + ZR_DEVNAME(zr)); + + if (zr->card.video_codec) { + codec_name = codecid_to_modulename(zr->card.video_codec); + if (codec_name) { + result = request_module(codec_name); + if (result) { + dprintk(1, + KERN_ERR + "%s: failed to load modules %s: %d\n", + ZR_DEVNAME(zr), codec_name, result); + } + } + } + if (zr->card.video_vfe) { + vfe_name = codecid_to_modulename(zr->card.video_vfe); + if (vfe_name) { + result = request_module(vfe_name); + if (result < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load modules %s: %d\n", + ZR_DEVNAME(zr), vfe_name, result); + } + } + } + + /* reset JPEG codec */ + jpeg_codec_sleep(zr, 1); + jpeg_codec_reset(zr); + /* video bus enabled */ + /* display codec revision */ + if (zr->card.video_codec != 0) { + master_codec = zoran_setup_videocodec(zr, zr->card.video_codec); + if (!master_codec) + goto zr_unreg_i2c; + zr->codec = videocodec_attach(master_codec); + if (!zr->codec) { + dprintk(1, KERN_ERR "%s: %s - no codec found\n", + ZR_DEVNAME(zr), __func__); + goto zr_free_codec; + } + if (zr->codec->type != zr->card.video_codec) { + dprintk(1, KERN_ERR "%s: %s - wrong codec\n", + ZR_DEVNAME(zr), __func__); + goto zr_detach_codec; + } + } + if (zr->card.video_vfe != 0) { + master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe); + if (!master_vfe) + goto zr_detach_codec; + zr->vfe = videocodec_attach(master_vfe); + if (!zr->vfe) { + dprintk(1, KERN_ERR "%s: %s - no VFE found\n", + ZR_DEVNAME(zr), __func__); + goto zr_free_vfe; + } + if (zr->vfe->type != zr->card.video_vfe) { + dprintk(1, KERN_ERR "%s: %s = wrong VFE\n", + ZR_DEVNAME(zr), __func__); + goto zr_detach_vfe; + } + } + + /* take care of Natoma chipset and a revision 1 zr36057 */ + if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { + zr->jpg_buffers.need_contiguous = 1; + dprintk(1, KERN_INFO + "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", + ZR_DEVNAME(zr)); + } + + if (zr36057_init(zr) < 0) + goto zr_detach_vfe; + + zoran_proc_init(zr); + + return 0; + +zr_detach_vfe: + videocodec_detach(zr->vfe); +zr_free_vfe: + kfree(master_vfe); +zr_detach_codec: + videocodec_detach(zr->codec); +zr_free_codec: + kfree(master_codec); +zr_unreg_i2c: + zoran_unregister_i2c(zr); +zr_free_irq: + btwrite(0, ZR36057_SPGPPCR); + free_irq(zr->pci_dev->irq, zr); +zr_unmap: + iounmap(zr->zr36057_mem); +zr_unreg: + v4l2_device_unregister(&zr->v4l2_dev); +zr_free_mem: + kfree(zr); + + return -ENODEV; +} + +static struct pci_driver zoran_driver = { + .name = "zr36067", + .id_table = zr36067_pci_tbl, + .probe = zoran_probe, + .remove = zoran_remove, +}; + +static int __init zoran_init(void) +{ + int res; + + printk(KERN_INFO "Zoran MJPEG board driver version %s\n", + ZORAN_VERSION); + + /* check the parameters we have been given, adjust if necessary */ + if (v4l_nbufs < 2) + v4l_nbufs = 2; + if (v4l_nbufs > VIDEO_MAX_FRAME) + v4l_nbufs = VIDEO_MAX_FRAME; + /* The user specfies the in KB, we want them in byte + * (and page aligned) */ + v4l_bufsize = PAGE_ALIGN(v4l_bufsize * 1024); + if (v4l_bufsize < 32768) + v4l_bufsize = 32768; + /* 2 MB is arbitrary but sufficient for the maximum possible images */ + if (v4l_bufsize > 2048 * 1024) + v4l_bufsize = 2048 * 1024; + if (jpg_nbufs < 4) + jpg_nbufs = 4; + if (jpg_nbufs > BUZ_MAX_FRAME) + jpg_nbufs = BUZ_MAX_FRAME; + jpg_bufsize = PAGE_ALIGN(jpg_bufsize * 1024); + if (jpg_bufsize < 8192) + jpg_bufsize = 8192; + if (jpg_bufsize > (512 * 1024)) + jpg_bufsize = 512 * 1024; + /* Use parameter for vidmem or try to find a video card */ + if (vidmem) { + dprintk(1, + KERN_INFO + "%s: Using supplied video memory base address @ 0x%lx\n", + ZORAN_NAME, vidmem); + } + + /* some mainboards might not do PCI-PCI data transfer well */ + if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL|PCIPCI_ALIMAGIK)) { + dprintk(1, + KERN_WARNING + "%s: chipset does not support reliable PCI-PCI DMA\n", + ZORAN_NAME); + } + + res = pci_register_driver(&zoran_driver); + if (res) { + dprintk(1, + KERN_ERR + "%s: Unable to register ZR36057 driver\n", + ZORAN_NAME); + return res; + } + + return 0; +} + +static void __exit zoran_exit(void) +{ + pci_unregister_driver(&zoran_driver); +} + +module_init(zoran_init); +module_exit(zoran_exit); diff --git a/drivers/media/pci/zoran/zoran_card.h b/drivers/media/pci/zoran/zoran_card.h new file mode 100644 index 00000000..4936fead --- /dev/null +++ b/drivers/media/pci/zoran/zoran_card.h @@ -0,0 +1,54 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles card-specific data and detection + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ZORAN_CARD_H__ +#define __ZORAN_CARD_H__ + +extern int zr36067_debug; + +#define dprintk(num, format, args...) \ + do { \ + if (zr36067_debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* Anybody who uses more than four? */ +#define BUZ_MAX 4 + +extern struct video_device zoran_template; + +extern int zoran_check_jpg_settings(struct zoran *zr, + struct zoran_jpg_settings *settings, + int try); +extern void zoran_open_init_params(struct zoran *zr); +extern void zoran_vdev_release(struct video_device *vdev); + +void zr36016_write(struct videocodec *codec, u16 reg, u32 val); + +#endif /* __ZORAN_CARD_H__ */ diff --git a/drivers/media/pci/zoran/zoran_device.c b/drivers/media/pci/zoran/zoran_device.c new file mode 100644 index 00000000..519164c5 --- /dev/null +++ b/drivers/media/pci/zoran/zoran_device.c @@ -0,0 +1,1640 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles device access (PCI/I2C/codec/...) + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include "videocodec.h" +#include "zoran.h" +#include "zoran_device.h" +#include "zoran_card.h" + +#define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \ + ZR36057_ISR_GIRQ1 | \ + ZR36057_ISR_JPEGRepIRQ ) + +static bool lml33dpath; /* default = 0 + * 1 will use digital path in capture + * mode instead of analog. It can be + * used for picture adjustments using + * tool like xawtv while watching image + * on TV monitor connected to the output. + * However, due to absence of 75 Ohm + * load on Bt819 input, there will be + * some image imperfections */ + +module_param(lml33dpath, bool, 0644); +MODULE_PARM_DESC(lml33dpath, + "Use digital path capture mode (on LML33 cards)"); + +static void +zr36057_init_vfe (struct zoran *zr); + +/* + * General Purpose I/O and Guest bus access + */ + +/* + * This is a bit tricky. When a board lacks a GPIO function, the corresponding + * GPIO bit number in the card_info structure is set to 0. + */ + +void +GPIO (struct zoran *zr, + int bit, + unsigned int value) +{ + u32 reg; + u32 mask; + + /* Make sure the bit number is legal + * A bit number of -1 (lacking) gives a mask of 0, + * making it harmless */ + mask = (1 << (24 + bit)) & 0xff000000; + reg = btread(ZR36057_GPPGCR1) & ~mask; + if (value) { + reg |= mask; + } + btwrite(reg, ZR36057_GPPGCR1); + udelay(1); +} + +/* + * Wait til post office is no longer busy + */ + +int +post_office_wait (struct zoran *zr) +{ + u32 por; + +// while (((por = btread(ZR36057_POR)) & (ZR36057_POR_POPen | ZR36057_POR_POTime)) == ZR36057_POR_POPen) { + while ((por = btread(ZR36057_POR)) & ZR36057_POR_POPen) { + /* wait for something to happen */ + } + if ((por & ZR36057_POR_POTime) && !zr->card.gws_not_connected) { + /* In LML33/BUZ \GWS line is not connected, so it has always timeout set */ + dprintk(1, KERN_INFO "%s: pop timeout %08x\n", ZR_DEVNAME(zr), + por); + return -1; + } + + return 0; +} + +int +post_office_write (struct zoran *zr, + unsigned int guest, + unsigned int reg, + unsigned int value) +{ + u32 por; + + por = + ZR36057_POR_PODir | ZR36057_POR_POTime | ((guest & 7) << 20) | + ((reg & 7) << 16) | (value & 0xFF); + btwrite(por, ZR36057_POR); + + return post_office_wait(zr); +} + +int +post_office_read (struct zoran *zr, + unsigned int guest, + unsigned int reg) +{ + u32 por; + + por = ZR36057_POR_POTime | ((guest & 7) << 20) | ((reg & 7) << 16); + btwrite(por, ZR36057_POR); + if (post_office_wait(zr) < 0) { + return -1; + } + + return btread(ZR36057_POR) & 0xFF; +} + +/* + * detect guests + */ + +static void +dump_guests (struct zoran *zr) +{ + if (zr36067_debug > 2) { + int i, guest[8]; + + for (i = 1; i < 8; i++) { // Don't read jpeg codec here + guest[i] = post_office_read(zr, i, 0); + } + + printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr)); + + for (i = 1; i < 8; i++) { + printk(" 0x%02x", guest[i]); + } + printk("\n"); + } +} + +static inline unsigned long +get_time (void) +{ + struct timeval tv; + + do_gettimeofday(&tv); + return (1000000 * tv.tv_sec + tv.tv_usec); +} + +void +detect_guest_activity (struct zoran *zr) +{ + int timeout, i, j, res, guest[8], guest0[8], change[8][3]; + unsigned long t0, t1; + + dump_guests(zr); + printk(KERN_INFO "%s: Detecting guests activity, please wait...\n", + ZR_DEVNAME(zr)); + for (i = 1; i < 8; i++) { // Don't read jpeg codec here + guest0[i] = guest[i] = post_office_read(zr, i, 0); + } + + timeout = 0; + j = 0; + t0 = get_time(); + while (timeout < 10000) { + udelay(10); + timeout++; + for (i = 1; (i < 8) && (j < 8); i++) { + res = post_office_read(zr, i, 0); + if (res != guest[i]) { + t1 = get_time(); + change[j][0] = (t1 - t0); + t0 = t1; + change[j][1] = i; + change[j][2] = res; + j++; + guest[i] = res; + } + } + if (j >= 8) + break; + } + printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr)); + + for (i = 1; i < 8; i++) { + printk(" 0x%02x", guest0[i]); + } + printk("\n"); + if (j == 0) { + printk(KERN_INFO "%s: No activity detected.\n", ZR_DEVNAME(zr)); + return; + } + for (i = 0; i < j; i++) { + printk(KERN_INFO "%s: %6d: %d => 0x%02x\n", ZR_DEVNAME(zr), + change[i][0], change[i][1], change[i][2]); + } +} + +/* + * JPEG Codec access + */ + +void +jpeg_codec_sleep (struct zoran *zr, + int sleep) +{ + GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep); + if (!sleep) { + dprintk(3, + KERN_DEBUG + "%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n", + ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1)); + udelay(500); + } else { + dprintk(3, + KERN_DEBUG + "%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n", + ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1)); + udelay(2); + } +} + +int +jpeg_codec_reset (struct zoran *zr) +{ + /* Take the codec out of sleep */ + jpeg_codec_sleep(zr, 0); + + if (zr->card.gpcs[GPCS_JPEG_RESET] != 0xff) { + post_office_write(zr, zr->card.gpcs[GPCS_JPEG_RESET], 0, + 0); + udelay(2); + } else { + GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0); + udelay(2); + GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1); + udelay(2); + } + + return 0; +} + +/* + * Set the registers for the size we have specified. Don't bother + * trying to understand this without the ZR36057 manual in front of + * you [AC]. + * + * PS: The manual is free for download in .pdf format from + * www.zoran.com - nicely done those folks. + */ + +static void +zr36057_adjust_vfe (struct zoran *zr, + enum zoran_codec_mode mode) +{ + u32 reg; + + switch (mode) { + case BUZ_MODE_MOTION_DECOMPRESS: + btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); + reg = btread(ZR36057_VFEHCR); + if ((reg & (1 << 10)) && zr->card.type != LML33R10) { + reg += ((1 << 10) | 1); + } + btwrite(reg, ZR36057_VFEHCR); + break; + case BUZ_MODE_MOTION_COMPRESS: + case BUZ_MODE_IDLE: + default: + if ((zr->norm & V4L2_STD_NTSC) || + (zr->card.type == LML33R10 && + (zr->norm & V4L2_STD_PAL))) + btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); + else + btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); + reg = btread(ZR36057_VFEHCR); + if (!(reg & (1 << 10)) && zr->card.type != LML33R10) { + reg -= ((1 << 10) | 1); + } + btwrite(reg, ZR36057_VFEHCR); + break; + } +} + +/* + * set geometry + */ + +static void +zr36057_set_vfe (struct zoran *zr, + int video_width, + int video_height, + const struct zoran_format *format) +{ + struct tvnorm *tvn; + unsigned HStart, HEnd, VStart, VEnd; + unsigned DispMode; + unsigned VidWinWid, VidWinHt; + unsigned hcrop1, hcrop2, vcrop1, vcrop2; + unsigned Wa, We, Ha, He; + unsigned X, Y, HorDcm, VerDcm; + u32 reg; + unsigned mask_line_size; + + tvn = zr->timing; + + Wa = tvn->Wa; + Ha = tvn->Ha; + + dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n", + ZR_DEVNAME(zr), video_width, video_height); + + if (video_width < BUZ_MIN_WIDTH || + video_height < BUZ_MIN_HEIGHT || + video_width > Wa || video_height > Ha) { + dprintk(1, KERN_ERR "%s: set_vfe: w=%d h=%d not valid\n", + ZR_DEVNAME(zr), video_width, video_height); + return; + } + + /**** zr36057 ****/ + + /* horizontal */ + VidWinWid = video_width; + X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa); + We = (VidWinWid * 64) / X; + HorDcm = 64 - X; + hcrop1 = 2 * ((tvn->Wa - We) / 4); + hcrop2 = tvn->Wa - We - hcrop1; + HStart = tvn->HStart ? tvn->HStart : 1; + /* (Ronald) Original comment: + * "| 1 Doesn't have any effect, tested on both a DC10 and a DC10+" + * this is false. It inverses chroma values on the LML33R10 (so Cr + * suddenly is shown as Cb and reverse, really cool effect if you + * want to see blue faces, not useful otherwise). So don't use |1. + * However, the DC10 has '0' as HStart, but does need |1, so we + * use a dirty check... + */ + HEnd = HStart + tvn->Wa - 1; + HStart += hcrop1; + HEnd -= hcrop2; + reg = ((HStart & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HStart) + | ((HEnd & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HEnd); + if (zr->card.vfe_pol.hsync_pol) + reg |= ZR36057_VFEHCR_HSPol; + btwrite(reg, ZR36057_VFEHCR); + + /* Vertical */ + DispMode = !(video_height > BUZ_MAX_HEIGHT / 2); + VidWinHt = DispMode ? video_height : video_height / 2; + Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha); + He = (VidWinHt * 64) / Y; + VerDcm = 64 - Y; + vcrop1 = (tvn->Ha / 2 - He) / 2; + vcrop2 = tvn->Ha / 2 - He - vcrop1; + VStart = tvn->VStart; + VEnd = VStart + tvn->Ha / 2; // - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP + VStart += vcrop1; + VEnd -= vcrop2; + reg = ((VStart & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VStart) + | ((VEnd & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VEnd); + if (zr->card.vfe_pol.vsync_pol) + reg |= ZR36057_VFEVCR_VSPol; + btwrite(reg, ZR36057_VFEVCR); + + /* scaler and pixel format */ + reg = 0; + reg |= (HorDcm << ZR36057_VFESPFR_HorDcm); + reg |= (VerDcm << ZR36057_VFESPFR_VerDcm); + reg |= (DispMode << ZR36057_VFESPFR_DispMode); + /* RJ: I don't know, why the following has to be the opposite + * of the corresponding ZR36060 setting, but only this way + * we get the correct colors when uncompressing to the screen */ + //reg |= ZR36057_VFESPFR_VCLKPol; /**/ + /* RJ: Don't know if that is needed for NTSC also */ + if (!(zr->norm & V4L2_STD_NTSC)) + reg |= ZR36057_VFESPFR_ExtFl; // NEEDED!!!!!!! Wolfgang + reg |= ZR36057_VFESPFR_TopField; + if (HorDcm >= 48) { + reg |= 3 << ZR36057_VFESPFR_HFilter; /* 5 tap filter */ + } else if (HorDcm >= 32) { + reg |= 2 << ZR36057_VFESPFR_HFilter; /* 4 tap filter */ + } else if (HorDcm >= 16) { + reg |= 1 << ZR36057_VFESPFR_HFilter; /* 3 tap filter */ + } + reg |= format->vfespfr; + btwrite(reg, ZR36057_VFESPFR); + + /* display configuration */ + reg = (16 << ZR36057_VDCR_MinPix) + | (VidWinHt << ZR36057_VDCR_VidWinHt) + | (VidWinWid << ZR36057_VDCR_VidWinWid); + if (pci_pci_problems & PCIPCI_TRITON) + // || zr->revision < 1) // Revision 1 has also Triton support + reg &= ~ZR36057_VDCR_Triton; + else + reg |= ZR36057_VDCR_Triton; + btwrite(reg, ZR36057_VDCR); + + /* (Ronald) don't write this if overlay_mask = NULL */ + if (zr->overlay_mask) { + /* Write overlay clipping mask data, but don't enable overlay clipping */ + /* RJ: since this makes only sense on the screen, we use + * zr->overlay_settings.width instead of video_width */ + + mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; + reg = virt_to_bus(zr->overlay_mask); + btwrite(reg, ZR36057_MMTR); + reg = virt_to_bus(zr->overlay_mask + mask_line_size); + btwrite(reg, ZR36057_MMBR); + reg = + mask_line_size - (zr->overlay_settings.width + + 31) / 32; + if (DispMode == 0) + reg += mask_line_size; + reg <<= ZR36057_OCR_MaskStride; + btwrite(reg, ZR36057_OCR); + } + + zr36057_adjust_vfe(zr, zr->codec_mode); +} + +/* + * Switch overlay on or off + */ + +void +zr36057_overlay (struct zoran *zr, + int on) +{ + u32 reg; + + if (on) { + /* do the necessary settings ... */ + btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); /* switch it off first */ + + zr36057_set_vfe(zr, + zr->overlay_settings.width, + zr->overlay_settings.height, + zr->overlay_settings.format); + + /* Start and length of each line MUST be 4-byte aligned. + * This should be already checked before the call to this routine. + * All error messages are internal driver checking only! */ + + /* video display top and bottom registers */ + reg = (long) zr->vbuf_base + + zr->overlay_settings.x * + ((zr->overlay_settings.format->depth + 7) / 8) + + zr->overlay_settings.y * + zr->vbuf_bytesperline; + btwrite(reg, ZR36057_VDTR); + if (reg & 3) + dprintk(1, + KERN_ERR + "%s: zr36057_overlay() - video_address not aligned\n", + ZR_DEVNAME(zr)); + if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2) + reg += zr->vbuf_bytesperline; + btwrite(reg, ZR36057_VDBR); + + /* video stride, status, and frame grab register */ + reg = zr->vbuf_bytesperline - + zr->overlay_settings.width * + ((zr->overlay_settings.format->depth + 7) / 8); + if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2) + reg += zr->vbuf_bytesperline; + if (reg & 3) + dprintk(1, + KERN_ERR + "%s: zr36057_overlay() - video_stride not aligned\n", + ZR_DEVNAME(zr)); + reg = (reg << ZR36057_VSSFGR_DispStride); + reg |= ZR36057_VSSFGR_VidOvf; /* clear overflow status */ + btwrite(reg, ZR36057_VSSFGR); + + /* Set overlay clipping */ + if (zr->overlay_settings.clipcount > 0) + btor(ZR36057_OCR_OvlEnable, ZR36057_OCR); + + /* ... and switch it on */ + btor(ZR36057_VDCR_VidEn, ZR36057_VDCR); + } else { + /* Switch it off */ + btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); + } +} + +/* + * The overlay mask has one bit for each pixel on a scan line, + * and the maximum window size is BUZ_MAX_WIDTH * BUZ_MAX_HEIGHT pixels. + */ + +void write_overlay_mask(struct zoran_fh *fh, struct v4l2_clip *vp, int count) +{ + struct zoran *zr = fh->zr; + unsigned mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; + u32 *mask; + int x, y, width, height; + unsigned i, j, k; + + /* fill mask with one bits */ + memset(fh->overlay_mask, ~0, mask_line_size * 4 * BUZ_MAX_HEIGHT); + + for (i = 0; i < count; ++i) { + /* pick up local copy of clip */ + x = vp[i].c.left; + y = vp[i].c.top; + width = vp[i].c.width; + height = vp[i].c.height; + + /* trim clips that extend beyond the window */ + if (x < 0) { + width += x; + x = 0; + } + if (y < 0) { + height += y; + y = 0; + } + if (x + width > fh->overlay_settings.width) { + width = fh->overlay_settings.width - x; + } + if (y + height > fh->overlay_settings.height) { + height = fh->overlay_settings.height - y; + } + + /* ignore degenerate clips */ + if (height <= 0) { + continue; + } + if (width <= 0) { + continue; + } + + /* apply clip for each scan line */ + for (j = 0; j < height; ++j) { + /* reset bit for each pixel */ + /* this can be optimized later if need be */ + mask = fh->overlay_mask + (y + j) * mask_line_size; + for (k = 0; k < width; ++k) { + mask[(x + k) / 32] &= + ~((u32) 1 << (x + k) % 32); + } + } + } +} + +/* Enable/Disable uncompressed memory grabbing of the 36057 */ + +void +zr36057_set_memgrab (struct zoran *zr, + int mode) +{ + if (mode) { + /* We only check SnapShot and not FrameGrab here. SnapShot==1 + * means a capture is already in progress, but FrameGrab==1 + * doesn't necessary mean that. It's more correct to say a 1 + * to 0 transition indicates a capture completed. If a + * capture is pending when capturing is tuned off, FrameGrab + * will be stuck at 1 until capturing is turned back on. + */ + if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) + dprintk(1, + KERN_WARNING + "%s: zr36057_set_memgrab(1) with SnapShot on!?\n", + ZR_DEVNAME(zr)); + + /* switch on VSync interrupts */ + btwrite(IRQ_MASK, ZR36057_ISR); // Clear Interrupts + btor(zr->card.vsync_int, ZR36057_ICR); // SW + + /* enable SnapShot */ + btor(ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR); + + /* Set zr36057 video front end and enable video */ + zr36057_set_vfe(zr, zr->v4l_settings.width, + zr->v4l_settings.height, + zr->v4l_settings.format); + + zr->v4l_memgrab_active = 1; + } else { + /* switch off VSync interrupts */ + btand(~zr->card.vsync_int, ZR36057_ICR); // SW + + zr->v4l_memgrab_active = 0; + zr->v4l_grab_frame = NO_GRAB_ACTIVE; + + /* reenable grabbing to screen if it was running */ + if (zr->v4l_overlay_active) { + zr36057_overlay(zr, 1); + } else { + btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); + btand(~ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR); + } + } +} + +int +wait_grab_pending (struct zoran *zr) +{ + unsigned long flags; + + /* wait until all pending grabs are finished */ + + if (!zr->v4l_memgrab_active) + return 0; + + wait_event_interruptible(zr->v4l_capq, + (zr->v4l_pend_tail == zr->v4l_pend_head)); + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&zr->spinlock, flags); + zr36057_set_memgrab(zr, 0); + spin_unlock_irqrestore(&zr->spinlock, flags); + + return 0; +} + +/***************************************************************************** + * * + * Set up the Buz-specific MJPEG part * + * * + *****************************************************************************/ + +static inline void +set_frame (struct zoran *zr, + int val) +{ + GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val); +} + +static void +set_videobus_dir (struct zoran *zr, + int val) +{ + switch (zr->card.type) { + case LML33: + case LML33R10: + if (lml33dpath == 0) + GPIO(zr, 5, val); + else + GPIO(zr, 5, 1); + break; + default: + GPIO(zr, zr->card.gpio[ZR_GPIO_VID_DIR], + zr->card.gpio_pol[ZR_GPIO_VID_DIR] ? !val : val); + break; + } +} + +static void +init_jpeg_queue (struct zoran *zr) +{ + int i; + + /* re-initialize DMA ring stuff */ + zr->jpg_que_head = 0; + zr->jpg_dma_head = 0; + zr->jpg_dma_tail = 0; + zr->jpg_que_tail = 0; + zr->jpg_seq_num = 0; + zr->JPEG_error = 0; + zr->num_errors = 0; + zr->jpg_err_seq = 0; + zr->jpg_err_shift = 0; + zr->jpg_queued_num = 0; + for (i = 0; i < zr->jpg_buffers.num_buffers; i++) { + zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + } + for (i = 0; i < BUZ_NUM_STAT_COM; i++) { + zr->stat_com[i] = cpu_to_le32(1); /* mark as unavailable to zr36057 */ + } +} + +static void +zr36057_set_jpg (struct zoran *zr, + enum zoran_codec_mode mode) +{ + struct tvnorm *tvn; + u32 reg; + + tvn = zr->timing; + + /* assert P_Reset, disable code transfer, deassert Active */ + btwrite(0, ZR36057_JPC); + + /* MJPEG compression mode */ + switch (mode) { + + case BUZ_MODE_MOTION_COMPRESS: + default: + reg = ZR36057_JMC_MJPGCmpMode; + break; + + case BUZ_MODE_MOTION_DECOMPRESS: + reg = ZR36057_JMC_MJPGExpMode; + reg |= ZR36057_JMC_SyncMstr; + /* RJ: The following is experimental - improves the output to screen */ + //if(zr->jpg_settings.VFIFO_FB) reg |= ZR36057_JMC_VFIFO_FB; // No, it doesn't. SM + break; + + case BUZ_MODE_STILL_COMPRESS: + reg = ZR36057_JMC_JPGCmpMode; + break; + + case BUZ_MODE_STILL_DECOMPRESS: + reg = ZR36057_JMC_JPGExpMode; + break; + + } + reg |= ZR36057_JMC_JPG; + if (zr->jpg_settings.field_per_buff == 1) + reg |= ZR36057_JMC_Fld_per_buff; + btwrite(reg, ZR36057_JMC); + + /* vertical */ + btor(ZR36057_VFEVCR_VSPol, ZR36057_VFEVCR); + reg = (6 << ZR36057_VSP_VsyncSize) | + (tvn->Ht << ZR36057_VSP_FrmTot); + btwrite(reg, ZR36057_VSP); + reg = ((zr->jpg_settings.img_y + tvn->VStart) << ZR36057_FVAP_NAY) | + (zr->jpg_settings.img_height << ZR36057_FVAP_PAY); + btwrite(reg, ZR36057_FVAP); + + /* horizontal */ + if (zr->card.vfe_pol.hsync_pol) + btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); + else + btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); + reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) | + (tvn->Wt << ZR36057_HSP_LineTot); + btwrite(reg, ZR36057_HSP); + reg = ((zr->jpg_settings.img_x + + tvn->HStart + 4) << ZR36057_FHAP_NAX) | + (zr->jpg_settings.img_width << ZR36057_FHAP_PAX); + btwrite(reg, ZR36057_FHAP); + + /* field process parameters */ + if (zr->jpg_settings.odd_even) + reg = ZR36057_FPP_Odd_Even; + else + reg = 0; + + btwrite(reg, ZR36057_FPP); + + /* Set proper VCLK Polarity, else colors will be wrong during playback */ + //btor(ZR36057_VFESPFR_VCLKPol, ZR36057_VFESPFR); + + /* code base address */ + reg = virt_to_bus(zr->stat_com); + btwrite(reg, ZR36057_JCBA); + + /* FIFO threshold (FIFO is 160. double words) */ + /* NOTE: decimal values here */ + switch (mode) { + + case BUZ_MODE_STILL_COMPRESS: + case BUZ_MODE_MOTION_COMPRESS: + if (zr->card.type != BUZ) + reg = 140; + else + reg = 60; + break; + + case BUZ_MODE_STILL_DECOMPRESS: + case BUZ_MODE_MOTION_DECOMPRESS: + reg = 20; + break; + + default: + reg = 80; + break; + + } + btwrite(reg, ZR36057_JCFT); + zr36057_adjust_vfe(zr, mode); + +} + +void +print_interrupts (struct zoran *zr) +{ + int res, noerr = 0; + + printk(KERN_INFO "%s: interrupts received:", ZR_DEVNAME(zr)); + if ((res = zr->field_counter) < -1 || res > 1) { + printk(" FD:%d", res); + } + if ((res = zr->intr_counter_GIRQ1) != 0) { + printk(" GIRQ1:%d", res); + noerr++; + } + if ((res = zr->intr_counter_GIRQ0) != 0) { + printk(" GIRQ0:%d", res); + noerr++; + } + if ((res = zr->intr_counter_CodRepIRQ) != 0) { + printk(" CodRepIRQ:%d", res); + noerr++; + } + if ((res = zr->intr_counter_JPEGRepIRQ) != 0) { + printk(" JPEGRepIRQ:%d", res); + noerr++; + } + if (zr->JPEG_max_missed) { + printk(" JPEG delays: max=%d min=%d", zr->JPEG_max_missed, + zr->JPEG_min_missed); + } + if (zr->END_event_missed) { + printk(" ENDs missed: %d", zr->END_event_missed); + } + //if (zr->jpg_queued_num) { + printk(" queue_state=%ld/%ld/%ld/%ld", zr->jpg_que_tail, + zr->jpg_dma_tail, zr->jpg_dma_head, zr->jpg_que_head); + //} + if (!noerr) { + printk(": no interrupts detected."); + } + printk("\n"); +} + +void +clear_interrupt_counters (struct zoran *zr) +{ + zr->intr_counter_GIRQ1 = 0; + zr->intr_counter_GIRQ0 = 0; + zr->intr_counter_CodRepIRQ = 0; + zr->intr_counter_JPEGRepIRQ = 0; + zr->field_counter = 0; + zr->IRQ1_in = 0; + zr->IRQ1_out = 0; + zr->JPEG_in = 0; + zr->JPEG_out = 0; + zr->JPEG_0 = 0; + zr->JPEG_1 = 0; + zr->END_event_missed = 0; + zr->JPEG_missed = 0; + zr->JPEG_max_missed = 0; + zr->JPEG_min_missed = 0x7fffffff; +} + +static u32 +count_reset_interrupt (struct zoran *zr) +{ + u32 isr; + + if ((isr = btread(ZR36057_ISR) & 0x78000000)) { + if (isr & ZR36057_ISR_GIRQ1) { + btwrite(ZR36057_ISR_GIRQ1, ZR36057_ISR); + zr->intr_counter_GIRQ1++; + } + if (isr & ZR36057_ISR_GIRQ0) { + btwrite(ZR36057_ISR_GIRQ0, ZR36057_ISR); + zr->intr_counter_GIRQ0++; + } + if (isr & ZR36057_ISR_CodRepIRQ) { + btwrite(ZR36057_ISR_CodRepIRQ, ZR36057_ISR); + zr->intr_counter_CodRepIRQ++; + } + if (isr & ZR36057_ISR_JPEGRepIRQ) { + btwrite(ZR36057_ISR_JPEGRepIRQ, ZR36057_ISR); + zr->intr_counter_JPEGRepIRQ++; + } + } + return isr; +} + +void +jpeg_start (struct zoran *zr) +{ + int reg; + + zr->frame_num = 0; + + /* deassert P_reset, disable code transfer, deassert Active */ + btwrite(ZR36057_JPC_P_Reset, ZR36057_JPC); + /* stop flushing the internal code buffer */ + btand(~ZR36057_MCTCR_CFlush, ZR36057_MCTCR); + /* enable code transfer */ + btor(ZR36057_JPC_CodTrnsEn, ZR36057_JPC); + + /* clear IRQs */ + btwrite(IRQ_MASK, ZR36057_ISR); + /* enable the JPEG IRQs */ + btwrite(zr->card.jpeg_int | + ZR36057_ICR_JPEGRepIRQ | + ZR36057_ICR_IntPinEn, + ZR36057_ICR); + + set_frame(zr, 0); // \FRAME + + /* set the JPEG codec guest ID */ + reg = (zr->card.gpcs[1] << ZR36057_JCGI_JPEGuestID) | + (0 << ZR36057_JCGI_JPEGuestReg); + btwrite(reg, ZR36057_JCGI); + + if (zr->card.video_vfe == CODEC_TYPE_ZR36016 && + zr->card.video_codec == CODEC_TYPE_ZR36050) { + /* Enable processing on the ZR36016 */ + if (zr->vfe) + zr36016_write(zr->vfe, 0, 1); + + /* load the address of the GO register in the ZR36050 latch */ + post_office_write(zr, 0, 0, 0); + } + + /* assert Active */ + btor(ZR36057_JPC_Active, ZR36057_JPC); + + /* enable the Go generation */ + btor(ZR36057_JMC_Go_en, ZR36057_JMC); + udelay(30); + + set_frame(zr, 1); // /FRAME + + dprintk(3, KERN_DEBUG "%s: jpeg_start\n", ZR_DEVNAME(zr)); +} + +void +zr36057_enable_jpg (struct zoran *zr, + enum zoran_codec_mode mode) +{ + struct vfe_settings cap; + int field_size = + zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff; + + zr->codec_mode = mode; + + cap.x = zr->jpg_settings.img_x; + cap.y = zr->jpg_settings.img_y; + cap.width = zr->jpg_settings.img_width; + cap.height = zr->jpg_settings.img_height; + cap.decimation = + zr->jpg_settings.HorDcm | (zr->jpg_settings.VerDcm << 8); + cap.quality = zr->jpg_settings.jpg_comp.quality; + + switch (mode) { + + case BUZ_MODE_MOTION_COMPRESS: { + struct jpeg_app_marker app; + struct jpeg_com_marker com; + + /* In motion compress mode, the decoder output must be enabled, and + * the video bus direction set to input. + */ + set_videobus_dir(zr, 0); + decoder_call(zr, video, s_stream, 1); + encoder_call(zr, video, s_routing, 0, 0, 0); + + /* Take the JPEG codec and the VFE out of sleep */ + jpeg_codec_sleep(zr, 0); + + /* set JPEG app/com marker */ + app.appn = zr->jpg_settings.jpg_comp.APPn; + app.len = zr->jpg_settings.jpg_comp.APP_len; + memcpy(app.data, zr->jpg_settings.jpg_comp.APP_data, 60); + zr->codec->control(zr->codec, CODEC_S_JPEG_APP_DATA, + sizeof(struct jpeg_app_marker), &app); + + com.len = zr->jpg_settings.jpg_comp.COM_len; + memcpy(com.data, zr->jpg_settings.jpg_comp.COM_data, 60); + zr->codec->control(zr->codec, CODEC_S_JPEG_COM_DATA, + sizeof(struct jpeg_com_marker), &com); + + /* Setup the JPEG codec */ + zr->codec->control(zr->codec, CODEC_S_JPEG_TDS_BYTE, + sizeof(int), &field_size); + zr->codec->set_video(zr->codec, zr->timing, &cap, + &zr->card.vfe_pol); + zr->codec->set_mode(zr->codec, CODEC_DO_COMPRESSION); + + /* Setup the VFE */ + if (zr->vfe) { + zr->vfe->control(zr->vfe, CODEC_S_JPEG_TDS_BYTE, + sizeof(int), &field_size); + zr->vfe->set_video(zr->vfe, zr->timing, &cap, + &zr->card.vfe_pol); + zr->vfe->set_mode(zr->vfe, CODEC_DO_COMPRESSION); + } + + init_jpeg_queue(zr); + zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO + + clear_interrupt_counters(zr); + dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_COMPRESS)\n", + ZR_DEVNAME(zr)); + break; + } + + case BUZ_MODE_MOTION_DECOMPRESS: + /* In motion decompression mode, the decoder output must be disabled, and + * the video bus direction set to output. + */ + decoder_call(zr, video, s_stream, 0); + set_videobus_dir(zr, 1); + encoder_call(zr, video, s_routing, 1, 0, 0); + + /* Take the JPEG codec and the VFE out of sleep */ + jpeg_codec_sleep(zr, 0); + /* Setup the VFE */ + if (zr->vfe) { + zr->vfe->set_video(zr->vfe, zr->timing, &cap, + &zr->card.vfe_pol); + zr->vfe->set_mode(zr->vfe, CODEC_DO_EXPANSION); + } + /* Setup the JPEG codec */ + zr->codec->set_video(zr->codec, zr->timing, &cap, + &zr->card.vfe_pol); + zr->codec->set_mode(zr->codec, CODEC_DO_EXPANSION); + + init_jpeg_queue(zr); + zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO + + clear_interrupt_counters(zr); + dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_DECOMPRESS)\n", + ZR_DEVNAME(zr)); + break; + + case BUZ_MODE_IDLE: + default: + /* shut down processing */ + btand(~(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ), + ZR36057_ICR); + btwrite(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ, + ZR36057_ISR); + btand(~ZR36057_JMC_Go_en, ZR36057_JMC); // \Go_en + + msleep(50); + + set_videobus_dir(zr, 0); + set_frame(zr, 1); // /FRAME + btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); // /CFlush + btwrite(0, ZR36057_JPC); // \P_Reset,\CodTrnsEn,\Active + btand(~ZR36057_JMC_VFIFO_FB, ZR36057_JMC); + btand(~ZR36057_JMC_SyncMstr, ZR36057_JMC); + jpeg_codec_reset(zr); + jpeg_codec_sleep(zr, 1); + zr36057_adjust_vfe(zr, mode); + + decoder_call(zr, video, s_stream, 1); + encoder_call(zr, video, s_routing, 0, 0, 0); + + dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr)); + break; + + } +} + +/* when this is called the spinlock must be held */ +void +zoran_feed_stat_com (struct zoran *zr) +{ + /* move frames from pending queue to DMA */ + + int frame, i, max_stat_com; + + max_stat_com = + (zr->jpg_settings.TmpDcm == + 1) ? BUZ_NUM_STAT_COM : (BUZ_NUM_STAT_COM >> 1); + + while ((zr->jpg_dma_head - zr->jpg_dma_tail) < max_stat_com && + zr->jpg_dma_head < zr->jpg_que_head) { + + frame = zr->jpg_pend[zr->jpg_dma_head & BUZ_MASK_FRAME]; + if (zr->jpg_settings.TmpDcm == 1) { + /* fill 1 stat_com entry */ + i = (zr->jpg_dma_head - + zr->jpg_err_shift) & BUZ_MASK_STAT_COM; + if (!(zr->stat_com[i] & cpu_to_le32(1))) + break; + zr->stat_com[i] = + cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus); + } else { + /* fill 2 stat_com entries */ + i = ((zr->jpg_dma_head - + zr->jpg_err_shift) & 1) * 2; + if (!(zr->stat_com[i] & cpu_to_le32(1))) + break; + zr->stat_com[i] = + cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus); + zr->stat_com[i + 1] = + cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus); + } + zr->jpg_buffers.buffer[frame].state = BUZ_STATE_DMA; + zr->jpg_dma_head++; + + } + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) + zr->jpg_queued_num++; +} + +/* when this is called the spinlock must be held */ +static void +zoran_reap_stat_com (struct zoran *zr) +{ + /* move frames from DMA queue to done queue */ + + int i; + u32 stat_com; + unsigned int seq; + unsigned int dif; + struct zoran_buffer *buffer; + int frame; + + /* In motion decompress we don't have a hardware frame counter, + * we just count the interrupts here */ + + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) { + zr->jpg_seq_num++; + } + while (zr->jpg_dma_tail < zr->jpg_dma_head) { + if (zr->jpg_settings.TmpDcm == 1) + i = (zr->jpg_dma_tail - + zr->jpg_err_shift) & BUZ_MASK_STAT_COM; + else + i = ((zr->jpg_dma_tail - + zr->jpg_err_shift) & 1) * 2 + 1; + + stat_com = le32_to_cpu(zr->stat_com[i]); + + if ((stat_com & 1) == 0) { + return; + } + frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME]; + buffer = &zr->jpg_buffers.buffer[frame]; + v4l2_get_timestamp(&buffer->bs.timestamp); + + if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { + buffer->bs.length = (stat_com & 0x7fffff) >> 1; + + /* update sequence number with the help of the counter in stat_com */ + + seq = ((stat_com >> 24) + zr->jpg_err_seq) & 0xff; + dif = (seq - zr->jpg_seq_num) & 0xff; + zr->jpg_seq_num += dif; + } else { + buffer->bs.length = 0; + } + buffer->bs.seq = + zr->jpg_settings.TmpDcm == + 2 ? (zr->jpg_seq_num >> 1) : zr->jpg_seq_num; + buffer->state = BUZ_STATE_DONE; + + zr->jpg_dma_tail++; + } +} + +static void zoran_restart(struct zoran *zr) +{ + /* Now the stat_comm buffer is ready for restart */ + unsigned int status = 0; + int mode; + + if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { + decoder_call(zr, video, g_input_status, &status); + mode = CODEC_DO_COMPRESSION; + } else { + status = V4L2_IN_ST_NO_SIGNAL; + mode = CODEC_DO_EXPANSION; + } + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || + !(status & V4L2_IN_ST_NO_SIGNAL)) { + /********** RESTART code *************/ + jpeg_codec_reset(zr); + zr->codec->set_mode(zr->codec, mode); + zr36057_set_jpg(zr, zr->codec_mode); + jpeg_start(zr); + + if (zr->num_errors <= 8) + dprintk(2, KERN_INFO "%s: Restart\n", + ZR_DEVNAME(zr)); + + zr->JPEG_missed = 0; + zr->JPEG_error = 2; + /********** End RESTART code ***********/ + } +} + +static void +error_handler (struct zoran *zr, + u32 astat, + u32 stat) +{ + int i; + + /* This is JPEG error handling part */ + if (zr->codec_mode != BUZ_MODE_MOTION_COMPRESS && + zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS) { + return; + } + + if ((stat & 1) == 0 && + zr->codec_mode == BUZ_MODE_MOTION_COMPRESS && + zr->jpg_dma_tail - zr->jpg_que_tail >= zr->jpg_buffers.num_buffers) { + /* No free buffers... */ + zoran_reap_stat_com(zr); + zoran_feed_stat_com(zr); + wake_up_interruptible(&zr->jpg_capq); + zr->JPEG_missed = 0; + return; + } + + if (zr->JPEG_error == 1) { + zoran_restart(zr); + return; + } + + /* + * First entry: error just happened during normal operation + * + * In BUZ_MODE_MOTION_COMPRESS: + * + * Possible glitch in TV signal. In this case we should + * stop the codec and wait for good quality signal before + * restarting it to avoid further problems + * + * In BUZ_MODE_MOTION_DECOMPRESS: + * + * Bad JPEG frame: we have to mark it as processed (codec crashed + * and was not able to do it itself), and to remove it from queue. + */ + btand(~ZR36057_JMC_Go_en, ZR36057_JMC); + udelay(1); + stat = stat | (post_office_read(zr, 7, 0) & 3) << 8; + btwrite(0, ZR36057_JPC); + btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); + jpeg_codec_reset(zr); + jpeg_codec_sleep(zr, 1); + zr->JPEG_error = 1; + zr->num_errors++; + + /* Report error */ + if (zr36067_debug > 1 && zr->num_errors <= 8) { + long frame; + int j; + + frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME]; + printk(KERN_ERR + "%s: JPEG error stat=0x%08x(0x%08x) queue_state=%ld/%ld/%ld/%ld seq=%ld frame=%ld. Codec stopped. ", + ZR_DEVNAME(zr), stat, zr->last_isr, + zr->jpg_que_tail, zr->jpg_dma_tail, + zr->jpg_dma_head, zr->jpg_que_head, + zr->jpg_seq_num, frame); + printk(KERN_INFO "stat_com frames:"); + for (j = 0; j < BUZ_NUM_STAT_COM; j++) { + for (i = 0; i < zr->jpg_buffers.num_buffers; i++) { + if (le32_to_cpu(zr->stat_com[j]) == zr->jpg_buffers.buffer[i].jpg.frag_tab_bus) + printk(KERN_CONT "% d->%d", j, i); + } + } + printk(KERN_CONT "\n"); + } + /* Find an entry in stat_com and rotate contents */ + if (zr->jpg_settings.TmpDcm == 1) + i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; + else + i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2; + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) { + /* Mimic zr36067 operation */ + zr->stat_com[i] |= cpu_to_le32(1); + if (zr->jpg_settings.TmpDcm != 1) + zr->stat_com[i + 1] |= cpu_to_le32(1); + /* Refill */ + zoran_reap_stat_com(zr); + zoran_feed_stat_com(zr); + wake_up_interruptible(&zr->jpg_capq); + /* Find an entry in stat_com again after refill */ + if (zr->jpg_settings.TmpDcm == 1) + i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; + else + i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2; + } + if (i) { + /* Rotate stat_comm entries to make current entry first */ + int j; + __le32 bus_addr[BUZ_NUM_STAT_COM]; + + /* Here we are copying the stat_com array, which + * is already in little endian format, so + * no endian conversions here + */ + memcpy(bus_addr, zr->stat_com, sizeof(bus_addr)); + + for (j = 0; j < BUZ_NUM_STAT_COM; j++) + zr->stat_com[j] = bus_addr[(i + j) & BUZ_MASK_STAT_COM]; + + zr->jpg_err_shift += i; + zr->jpg_err_shift &= BUZ_MASK_STAT_COM; + } + if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) + zr->jpg_err_seq = zr->jpg_seq_num; /* + 1; */ + zoran_restart(zr); +} + +irqreturn_t +zoran_irq (int irq, + void *dev_id) +{ + u32 stat, astat; + int count; + struct zoran *zr; + unsigned long flags; + + zr = dev_id; + count = 0; + + if (zr->testing) { + /* Testing interrupts */ + spin_lock_irqsave(&zr->spinlock, flags); + while ((stat = count_reset_interrupt(zr))) { + if (count++ > 100) { + btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); + dprintk(1, + KERN_ERR + "%s: IRQ lockup while testing, isr=0x%08x, cleared int mask\n", + ZR_DEVNAME(zr), stat); + wake_up_interruptible(&zr->test_q); + } + } + zr->last_isr = stat; + spin_unlock_irqrestore(&zr->spinlock, flags); + return IRQ_HANDLED; + } + + spin_lock_irqsave(&zr->spinlock, flags); + while (1) { + /* get/clear interrupt status bits */ + stat = count_reset_interrupt(zr); + astat = stat & IRQ_MASK; + if (!astat) { + break; + } + dprintk(4, + KERN_DEBUG + "zoran_irq: astat: 0x%08x, mask: 0x%08x\n", + astat, btread(ZR36057_ICR)); + if (astat & zr->card.vsync_int) { // SW + + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || + zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { + /* count missed interrupts */ + zr->JPEG_missed++; + } + //post_office_read(zr,1,0); + /* Interrupts may still happen when + * zr->v4l_memgrab_active is switched off. + * We simply ignore them */ + + if (zr->v4l_memgrab_active) { + /* A lot more checks should be here ... */ + if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) == 0) + dprintk(1, + KERN_WARNING + "%s: BuzIRQ with SnapShot off ???\n", + ZR_DEVNAME(zr)); + + if (zr->v4l_grab_frame != NO_GRAB_ACTIVE) { + /* There is a grab on a frame going on, check if it has finished */ + if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_FrameGrab) == 0) { + /* it is finished, notify the user */ + + zr->v4l_buffers.buffer[zr->v4l_grab_frame].state = BUZ_STATE_DONE; + zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.seq = zr->v4l_grab_seq; + v4l2_get_timestamp(&zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.timestamp); + zr->v4l_grab_frame = NO_GRAB_ACTIVE; + zr->v4l_pend_tail++; + } + } + + if (zr->v4l_grab_frame == NO_GRAB_ACTIVE) + wake_up_interruptible(&zr->v4l_capq); + + /* Check if there is another grab queued */ + + if (zr->v4l_grab_frame == NO_GRAB_ACTIVE && + zr->v4l_pend_tail != zr->v4l_pend_head) { + int frame = zr->v4l_pend[zr->v4l_pend_tail & V4L_MASK_FRAME]; + u32 reg; + + zr->v4l_grab_frame = frame; + + /* Set zr36057 video front end and enable video */ + + /* Buffer address */ + + reg = zr->v4l_buffers.buffer[frame].v4l.fbuffer_bus; + btwrite(reg, ZR36057_VDTR); + if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2) + reg += zr->v4l_settings.bytesperline; + btwrite(reg, ZR36057_VDBR); + + /* video stride, status, and frame grab register */ + reg = 0; + if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2) + reg += zr->v4l_settings.bytesperline; + reg = (reg << ZR36057_VSSFGR_DispStride); + reg |= ZR36057_VSSFGR_VidOvf; + reg |= ZR36057_VSSFGR_SnapShot; + reg |= ZR36057_VSSFGR_FrameGrab; + btwrite(reg, ZR36057_VSSFGR); + + btor(ZR36057_VDCR_VidEn, + ZR36057_VDCR); + } + } + + /* even if we don't grab, we do want to increment + * the sequence counter to see lost frames */ + zr->v4l_grab_seq++; + } +#if (IRQ_MASK & ZR36057_ISR_CodRepIRQ) + if (astat & ZR36057_ISR_CodRepIRQ) { + zr->intr_counter_CodRepIRQ++; + IDEBUG(printk(KERN_DEBUG "%s: ZR36057_ISR_CodRepIRQ\n", + ZR_DEVNAME(zr))); + btand(~ZR36057_ICR_CodRepIRQ, ZR36057_ICR); + } +#endif /* (IRQ_MASK & ZR36057_ISR_CodRepIRQ) */ + +#if (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) + if ((astat & ZR36057_ISR_JPEGRepIRQ) && + (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || + zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)) { + if (zr36067_debug > 1 && (!zr->frame_num || zr->JPEG_error)) { + char sv[BUZ_NUM_STAT_COM + 1]; + int i; + + printk(KERN_INFO + "%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n", + ZR_DEVNAME(zr), stat, + zr->jpg_settings.odd_even, + zr->jpg_settings.field_per_buff, + zr->JPEG_missed); + + for (i = 0; i < BUZ_NUM_STAT_COM; i++) + sv[i] = le32_to_cpu(zr->stat_com[i]) & 1 ? '1' : '0'; + sv[BUZ_NUM_STAT_COM] = 0; + printk(KERN_INFO + "%s: stat_com=%s queue_state=%ld/%ld/%ld/%ld\n", + ZR_DEVNAME(zr), sv, + zr->jpg_que_tail, + zr->jpg_dma_tail, + zr->jpg_dma_head, + zr->jpg_que_head); + } else { + /* Get statistics */ + if (zr->JPEG_missed > zr->JPEG_max_missed) + zr->JPEG_max_missed = zr->JPEG_missed; + if (zr->JPEG_missed < zr->JPEG_min_missed) + zr->JPEG_min_missed = zr->JPEG_missed; + } + + if (zr36067_debug > 2 && zr->frame_num < 6) { + int i; + + printk(KERN_INFO "%s: seq=%ld stat_com:", + ZR_DEVNAME(zr), zr->jpg_seq_num); + for (i = 0; i < 4; i++) { + printk(KERN_CONT " %08x", + le32_to_cpu(zr->stat_com[i])); + } + printk(KERN_CONT "\n"); + } + zr->frame_num++; + zr->JPEG_missed = 0; + zr->JPEG_error = 0; + zoran_reap_stat_com(zr); + zoran_feed_stat_com(zr); + wake_up_interruptible(&zr->jpg_capq); + } +#endif /* (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) */ + + /* DATERR, too many fields missed, error processing */ + if ((astat & zr->card.jpeg_int) || + zr->JPEG_missed > 25 || + zr->JPEG_error == 1 || + ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) && + (zr->frame_num && (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) { + error_handler(zr, astat, stat); + } + + count++; + if (count > 10) { + dprintk(2, KERN_WARNING "%s: irq loop %d\n", + ZR_DEVNAME(zr), count); + if (count > 20) { + btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); + dprintk(2, + KERN_ERR + "%s: IRQ lockup, cleared int mask\n", + ZR_DEVNAME(zr)); + break; + } + } + zr->last_isr = stat; + } + spin_unlock_irqrestore(&zr->spinlock, flags); + + return IRQ_HANDLED; +} + +void +zoran_set_pci_master (struct zoran *zr, + int set_master) +{ + if (set_master) { + pci_set_master(zr->pci_dev); + } else { + u16 command; + + pci_read_config_word(zr->pci_dev, PCI_COMMAND, &command); + command &= ~PCI_COMMAND_MASTER; + pci_write_config_word(zr->pci_dev, PCI_COMMAND, command); + } +} + +void +zoran_init_hardware (struct zoran *zr) +{ + /* Enable bus-mastering */ + zoran_set_pci_master(zr, 1); + + /* Initialize the board */ + if (zr->card.init) { + zr->card.init(zr); + } + + decoder_call(zr, core, init, 0); + decoder_call(zr, core, s_std, zr->norm); + decoder_call(zr, video, s_routing, + zr->card.input[zr->input].muxsel, 0, 0); + + encoder_call(zr, core, init, 0); + encoder_call(zr, video, s_std_output, zr->norm); + encoder_call(zr, video, s_routing, 0, 0, 0); + + /* toggle JPEG codec sleep to sync PLL */ + jpeg_codec_sleep(zr, 1); + jpeg_codec_sleep(zr, 0); + + /* set individual interrupt enables (without GIRQ1) + * but don't global enable until zoran_open() */ + + //btwrite(IRQ_MASK & ~ZR36057_ISR_GIRQ1, ZR36057_ICR); // SW + // It looks like using only JPEGRepIRQEn is not always reliable, + // may be when JPEG codec crashes it won't generate IRQ? So, + /*CP*/ // btwrite(IRQ_MASK, ZR36057_ICR); // Enable Vsync interrupts too. SM WHY ? LP + zr36057_init_vfe(zr); + + zr36057_enable_jpg(zr, BUZ_MODE_IDLE); + + btwrite(IRQ_MASK, ZR36057_ISR); // Clears interrupts +} + +void +zr36057_restart (struct zoran *zr) +{ + btwrite(0, ZR36057_SPGPPCR); + mdelay(1); + btor(ZR36057_SPGPPCR_SoftReset, ZR36057_SPGPPCR); + mdelay(1); + + /* assert P_Reset */ + btwrite(0, ZR36057_JPC); + /* set up GPIO direction - all output */ + btwrite(ZR36057_SPGPPCR_SoftReset | 0, ZR36057_SPGPPCR); + + /* set up GPIO pins and guest bus timing */ + btwrite((0x81 << 24) | 0x8888, ZR36057_GPPGCR1); +} + +/* + * initialize video front end + */ + +static void +zr36057_init_vfe (struct zoran *zr) +{ + u32 reg; + + reg = btread(ZR36057_VFESPFR); + reg |= ZR36057_VFESPFR_LittleEndian; + reg &= ~ZR36057_VFESPFR_VCLKPol; + reg |= ZR36057_VFESPFR_ExtFl; + reg |= ZR36057_VFESPFR_TopField; + btwrite(reg, ZR36057_VFESPFR); + reg = btread(ZR36057_VDCR); + if (pci_pci_problems & PCIPCI_TRITON) + // || zr->revision < 1) // Revision 1 has also Triton support + reg &= ~ZR36057_VDCR_Triton; + else + reg |= ZR36057_VDCR_Triton; + btwrite(reg, ZR36057_VDCR); +} diff --git a/drivers/media/pci/zoran/zoran_device.h b/drivers/media/pci/zoran/zoran_device.h new file mode 100644 index 00000000..07f2c23f --- /dev/null +++ b/drivers/media/pci/zoran/zoran_device.h @@ -0,0 +1,95 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles card-specific data and detection + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ZORAN_DEVICE_H__ +#define __ZORAN_DEVICE_H__ + +/* general purpose I/O */ +extern void GPIO(struct zoran *zr, + int bit, + unsigned int value); + +/* codec (or actually: guest bus) access */ +extern int post_office_wait(struct zoran *zr); +extern int post_office_write(struct zoran *zr, + unsigned guest, + unsigned reg, + unsigned value); +extern int post_office_read(struct zoran *zr, + unsigned guest, + unsigned reg); + +extern void detect_guest_activity(struct zoran *zr); + +extern void jpeg_codec_sleep(struct zoran *zr, + int sleep); +extern int jpeg_codec_reset(struct zoran *zr); + +/* zr360x7 access to raw capture */ +extern void zr36057_overlay(struct zoran *zr, + int on); +extern void write_overlay_mask(struct zoran_fh *fh, + struct v4l2_clip *vp, + int count); +extern void zr36057_set_memgrab(struct zoran *zr, + int mode); +extern int wait_grab_pending(struct zoran *zr); + +/* interrupts */ +extern void print_interrupts(struct zoran *zr); +extern void clear_interrupt_counters(struct zoran *zr); +extern irqreturn_t zoran_irq(int irq, void *dev_id); + +/* JPEG codec access */ +extern void jpeg_start(struct zoran *zr); +extern void zr36057_enable_jpg(struct zoran *zr, + enum zoran_codec_mode mode); +extern void zoran_feed_stat_com(struct zoran *zr); + +/* general */ +extern void zoran_set_pci_master(struct zoran *zr, + int set_master); +extern void zoran_init_hardware(struct zoran *zr); +extern void zr36057_restart(struct zoran *zr); + +extern const struct zoran_format zoran_formats[]; + +extern int v4l_nbufs; +extern int v4l_bufsize; +extern int jpg_nbufs; +extern int jpg_bufsize; +extern int pass_through; + +/* i2c */ +#define decoder_call(zr, o, f, args...) \ + v4l2_subdev_call(zr->decoder, o, f, ##args) +#define encoder_call(zr, o, f, args...) \ + v4l2_subdev_call(zr->encoder, o, f, ##args) + +#endif /* __ZORAN_DEVICE_H__ */ diff --git a/drivers/media/pci/zoran/zoran_driver.c b/drivers/media/pci/zoran/zoran_driver.c new file mode 100644 index 00000000..d133c30c --- /dev/null +++ b/drivers/media/pci/zoran/zoran_driver.c @@ -0,0 +1,3091 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * Copyright (C) 2000 Serguei Miridonov + * + * Changes for BUZ by Wolfgang Scherr + * + * Changes for DC10/DC30 by Laurent Pinchart + * + * Changes for LML33R10 by Maxim Yevtyushkin + * + * Changes for videodev2/v4l2 by Ronald Bultje + * + * Based on + * + * Miro DC10 driver + * Copyright (C) 1999 Wolfgang Scherr + * + * Iomega Buz driver version 1.0 + * Copyright (C) 1999 Rainer Johanni + * + * buz.0.0.3 + * Copyright (C) 1998 Dave Perks + * + * bttv - Bt848 frame grabber driver + * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + * & Marcus Metzler (mocm@thp.uni-koeln.de) + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include +#include "videocodec.h" + +#include +#include +#include +#include + +#include +#include "zoran.h" +#include "zoran_device.h" +#include "zoran_card.h" + + +const struct zoran_format zoran_formats[] = { + { + .name = "15-bit RGB LE", + .fourcc = V4L2_PIX_FMT_RGB555, + .colorspace = V4L2_COLORSPACE_SRGB, + .depth = 15, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif| + ZR36057_VFESPFR_LittleEndian, + }, { + .name = "15-bit RGB BE", + .fourcc = V4L2_PIX_FMT_RGB555X, + .colorspace = V4L2_COLORSPACE_SRGB, + .depth = 15, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif, + }, { + .name = "16-bit RGB LE", + .fourcc = V4L2_PIX_FMT_RGB565, + .colorspace = V4L2_COLORSPACE_SRGB, + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif| + ZR36057_VFESPFR_LittleEndian, + }, { + .name = "16-bit RGB BE", + .fourcc = V4L2_PIX_FMT_RGB565X, + .colorspace = V4L2_COLORSPACE_SRGB, + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif, + }, { + .name = "24-bit RGB", + .fourcc = V4L2_PIX_FMT_BGR24, + .colorspace = V4L2_COLORSPACE_SRGB, + .depth = 24, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_Pack24, + }, { + .name = "32-bit RGB LE", + .fourcc = V4L2_PIX_FMT_BGR32, + .colorspace = V4L2_COLORSPACE_SRGB, + .depth = 32, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_LittleEndian, + }, { + .name = "32-bit RGB BE", + .fourcc = V4L2_PIX_FMT_RGB32, + .colorspace = V4L2_COLORSPACE_SRGB, + .depth = 32, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888, + }, { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_YUV422, + }, { + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_YUV422|ZR36057_VFESPFR_LittleEndian, + }, { + .name = "Hardware-encoded Motion-JPEG", + .fourcc = V4L2_PIX_FMT_MJPEG, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .depth = 0, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_PLAYBACK | + ZORAN_FORMAT_COMPRESSED, + } +}; +#define NUM_FORMATS ARRAY_SIZE(zoran_formats) + + /* small helper function for calculating buffersizes for v4l2 + * we calculate the nearest higher power-of-two, which + * will be the recommended buffersize */ +static __u32 +zoran_v4l2_calc_bufsize (struct zoran_jpg_settings *settings) +{ + __u8 div = settings->VerDcm * settings->HorDcm * settings->TmpDcm; + __u32 num = (1024 * 512) / (div); + __u32 result = 2; + + num--; + while (num) { + num >>= 1; + result <<= 1; + } + + if (result > jpg_bufsize) + return jpg_bufsize; + if (result < 8192) + return 8192; + return result; +} + +/* forward references */ +static void v4l_fbuffer_free(struct zoran_fh *fh); +static void jpg_fbuffer_free(struct zoran_fh *fh); + +/* Set mapping mode */ +static void map_mode_raw(struct zoran_fh *fh) +{ + fh->map_mode = ZORAN_MAP_MODE_RAW; + fh->buffers.buffer_size = v4l_bufsize; + fh->buffers.num_buffers = v4l_nbufs; +} +static void map_mode_jpg(struct zoran_fh *fh, int play) +{ + fh->map_mode = play ? ZORAN_MAP_MODE_JPG_PLAY : ZORAN_MAP_MODE_JPG_REC; + fh->buffers.buffer_size = jpg_bufsize; + fh->buffers.num_buffers = jpg_nbufs; +} +static inline const char *mode_name(enum zoran_map_mode mode) +{ + return mode == ZORAN_MAP_MODE_RAW ? "V4L" : "JPG"; +} + +/* + * Allocate the V4L grab buffers + * + * These have to be pysically contiguous. + */ + +static int v4l_fbuffer_alloc(struct zoran_fh *fh) +{ + struct zoran *zr = fh->zr; + int i, off; + unsigned char *mem; + + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (fh->buffers.buffer[i].v4l.fbuffer) + dprintk(2, + KERN_WARNING + "%s: %s - buffer %d already allocated!?\n", + ZR_DEVNAME(zr), __func__, i); + + //udelay(20); + mem = kmalloc(fh->buffers.buffer_size, + GFP_KERNEL | __GFP_NOWARN); + if (!mem) { + dprintk(1, + KERN_ERR + "%s: %s - kmalloc for V4L buf %d failed\n", + ZR_DEVNAME(zr), __func__, i); + v4l_fbuffer_free(fh); + return -ENOBUFS; + } + fh->buffers.buffer[i].v4l.fbuffer = mem; + fh->buffers.buffer[i].v4l.fbuffer_phys = virt_to_phys(mem); + fh->buffers.buffer[i].v4l.fbuffer_bus = virt_to_bus(mem); + for (off = 0; off < fh->buffers.buffer_size; + off += PAGE_SIZE) + SetPageReserved(virt_to_page(mem + off)); + dprintk(4, + KERN_INFO + "%s: %s - V4L frame %d mem 0x%lx (bus: 0x%llx)\n", + ZR_DEVNAME(zr), __func__, i, (unsigned long) mem, + (unsigned long long)virt_to_bus(mem)); + } + + fh->buffers.allocated = 1; + + return 0; +} + +/* free the V4L grab buffers */ +static void v4l_fbuffer_free(struct zoran_fh *fh) +{ + struct zoran *zr = fh->zr; + int i, off; + unsigned char *mem; + + dprintk(4, KERN_INFO "%s: %s\n", ZR_DEVNAME(zr), __func__); + + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (!fh->buffers.buffer[i].v4l.fbuffer) + continue; + + mem = fh->buffers.buffer[i].v4l.fbuffer; + for (off = 0; off < fh->buffers.buffer_size; + off += PAGE_SIZE) + ClearPageReserved(virt_to_page(mem + off)); + kfree(fh->buffers.buffer[i].v4l.fbuffer); + fh->buffers.buffer[i].v4l.fbuffer = NULL; + } + + fh->buffers.allocated = 0; +} + +/* + * Allocate the MJPEG grab buffers. + * + * If a Natoma chipset is present and this is a revision 1 zr36057, + * each MJPEG buffer needs to be physically contiguous. + * (RJ: This statement is from Dave Perks' original driver, + * I could never check it because I have a zr36067) + * + * RJ: The contents grab buffers needs never be accessed in the driver. + * Therefore there is no need to allocate them with vmalloc in order + * to get a contiguous virtual memory space. + * I don't understand why many other drivers first allocate them with + * vmalloc (which uses internally also get_zeroed_page, but delivers you + * virtual addresses) and then again have to make a lot of efforts + * to get the physical address. + * + * Ben Capper: + * On big-endian architectures (such as ppc) some extra steps + * are needed. When reading and writing to the stat_com array + * and fragment buffers, the device expects to see little- + * endian values. The use of cpu_to_le32() and le32_to_cpu() + * in this function (and one or two others in zoran_device.c) + * ensure that these values are always stored in little-endian + * form, regardless of architecture. The zr36057 does Very Bad + * Things on big endian architectures if the stat_com array + * and fragment buffers are not little-endian. + */ + +static int jpg_fbuffer_alloc(struct zoran_fh *fh) +{ + struct zoran *zr = fh->zr; + int i, j, off; + u8 *mem; + + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (fh->buffers.buffer[i].jpg.frag_tab) + dprintk(2, + KERN_WARNING + "%s: %s - buffer %d already allocated!?\n", + ZR_DEVNAME(zr), __func__, i); + + /* Allocate fragment table for this buffer */ + + mem = (void *)get_zeroed_page(GFP_KERNEL); + if (!mem) { + dprintk(1, + KERN_ERR + "%s: %s - get_zeroed_page (frag_tab) failed for buffer %d\n", + ZR_DEVNAME(zr), __func__, i); + jpg_fbuffer_free(fh); + return -ENOBUFS; + } + fh->buffers.buffer[i].jpg.frag_tab = (__le32 *)mem; + fh->buffers.buffer[i].jpg.frag_tab_bus = virt_to_bus(mem); + + if (fh->buffers.need_contiguous) { + mem = kmalloc(fh->buffers.buffer_size, GFP_KERNEL); + if (mem == NULL) { + dprintk(1, + KERN_ERR + "%s: %s - kmalloc failed for buffer %d\n", + ZR_DEVNAME(zr), __func__, i); + jpg_fbuffer_free(fh); + return -ENOBUFS; + } + fh->buffers.buffer[i].jpg.frag_tab[0] = + cpu_to_le32(virt_to_bus(mem)); + fh->buffers.buffer[i].jpg.frag_tab[1] = + cpu_to_le32((fh->buffers.buffer_size >> 1) | 1); + for (off = 0; off < fh->buffers.buffer_size; off += PAGE_SIZE) + SetPageReserved(virt_to_page(mem + off)); + } else { + /* jpg_bufsize is already page aligned */ + for (j = 0; j < fh->buffers.buffer_size / PAGE_SIZE; j++) { + mem = (void *)get_zeroed_page(GFP_KERNEL); + if (mem == NULL) { + dprintk(1, + KERN_ERR + "%s: %s - get_zeroed_page failed for buffer %d\n", + ZR_DEVNAME(zr), __func__, i); + jpg_fbuffer_free(fh); + return -ENOBUFS; + } + + fh->buffers.buffer[i].jpg.frag_tab[2 * j] = + cpu_to_le32(virt_to_bus(mem)); + fh->buffers.buffer[i].jpg.frag_tab[2 * j + 1] = + cpu_to_le32((PAGE_SIZE >> 2) << 1); + SetPageReserved(virt_to_page(mem)); + } + + fh->buffers.buffer[i].jpg.frag_tab[2 * j - 1] |= cpu_to_le32(1); + } + } + + dprintk(4, + KERN_DEBUG "%s: %s - %d KB allocated\n", + ZR_DEVNAME(zr), __func__, + (fh->buffers.num_buffers * fh->buffers.buffer_size) >> 10); + + fh->buffers.allocated = 1; + + return 0; +} + +/* free the MJPEG grab buffers */ +static void jpg_fbuffer_free(struct zoran_fh *fh) +{ + struct zoran *zr = fh->zr; + int i, j, off; + unsigned char *mem; + __le32 frag_tab; + struct zoran_buffer *buffer; + + dprintk(4, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__); + + for (i = 0, buffer = &fh->buffers.buffer[0]; + i < fh->buffers.num_buffers; i++, buffer++) { + if (!buffer->jpg.frag_tab) + continue; + + if (fh->buffers.need_contiguous) { + frag_tab = buffer->jpg.frag_tab[0]; + + if (frag_tab) { + mem = bus_to_virt(le32_to_cpu(frag_tab)); + for (off = 0; off < fh->buffers.buffer_size; off += PAGE_SIZE) + ClearPageReserved(virt_to_page(mem + off)); + kfree(mem); + buffer->jpg.frag_tab[0] = 0; + buffer->jpg.frag_tab[1] = 0; + } + } else { + for (j = 0; j < fh->buffers.buffer_size / PAGE_SIZE; j++) { + frag_tab = buffer->jpg.frag_tab[2 * j]; + + if (!frag_tab) + break; + ClearPageReserved(virt_to_page(bus_to_virt(le32_to_cpu(frag_tab)))); + free_page((unsigned long)bus_to_virt(le32_to_cpu(frag_tab))); + buffer->jpg.frag_tab[2 * j] = 0; + buffer->jpg.frag_tab[2 * j + 1] = 0; + } + } + + free_page((unsigned long)buffer->jpg.frag_tab); + buffer->jpg.frag_tab = NULL; + } + + fh->buffers.allocated = 0; +} + +/* + * V4L Buffer grabbing + */ + +static int +zoran_v4l_set_format (struct zoran_fh *fh, + int width, + int height, + const struct zoran_format *format) +{ + struct zoran *zr = fh->zr; + int bpp; + + /* Check size and format of the grab wanted */ + + if (height < BUZ_MIN_HEIGHT || width < BUZ_MIN_WIDTH || + height > BUZ_MAX_HEIGHT || width > BUZ_MAX_WIDTH) { + dprintk(1, + KERN_ERR + "%s: %s - wrong frame size (%dx%d)\n", + ZR_DEVNAME(zr), __func__, width, height); + return -EINVAL; + } + + bpp = (format->depth + 7) / 8; + + /* Check against available buffer size */ + if (height * width * bpp > fh->buffers.buffer_size) { + dprintk(1, + KERN_ERR + "%s: %s - video buffer size (%d kB) is too small\n", + ZR_DEVNAME(zr), __func__, fh->buffers.buffer_size >> 10); + return -EINVAL; + } + + /* The video front end needs 4-byte alinged line sizes */ + + if ((bpp == 2 && (width & 1)) || (bpp == 3 && (width & 3))) { + dprintk(1, + KERN_ERR + "%s: %s - wrong frame alignment\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + fh->v4l_settings.width = width; + fh->v4l_settings.height = height; + fh->v4l_settings.format = format; + fh->v4l_settings.bytesperline = bpp * fh->v4l_settings.width; + + return 0; +} + +static int zoran_v4l_queue_frame(struct zoran_fh *fh, int num) +{ + struct zoran *zr = fh->zr; + unsigned long flags; + int res = 0; + + if (!fh->buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: %s - buffers not yet allocated\n", + ZR_DEVNAME(zr), __func__); + res = -ENOMEM; + } + + /* No grabbing outside the buffer range! */ + if (num >= fh->buffers.num_buffers || num < 0) { + dprintk(1, + KERN_ERR + "%s: %s - buffer %d is out of range\n", + ZR_DEVNAME(zr), __func__, num); + res = -EINVAL; + } + + spin_lock_irqsave(&zr->spinlock, flags); + + if (fh->buffers.active == ZORAN_FREE) { + if (zr->v4l_buffers.active == ZORAN_FREE) { + zr->v4l_buffers = fh->buffers; + fh->buffers.active = ZORAN_ACTIVE; + } else { + dprintk(1, + KERN_ERR + "%s: %s - another session is already capturing\n", + ZR_DEVNAME(zr), __func__); + res = -EBUSY; + } + } + + /* make sure a grab isn't going on currently with this buffer */ + if (!res) { + switch (zr->v4l_buffers.buffer[num].state) { + default: + case BUZ_STATE_PEND: + if (zr->v4l_buffers.active == ZORAN_FREE) { + fh->buffers.active = ZORAN_FREE; + zr->v4l_buffers.allocated = 0; + } + res = -EBUSY; /* what are you doing? */ + break; + case BUZ_STATE_DONE: + dprintk(2, + KERN_WARNING + "%s: %s - queueing buffer %d in state DONE!?\n", + ZR_DEVNAME(zr), __func__, num); + case BUZ_STATE_USER: + /* since there is at least one unused buffer there's room for at least + * one more pend[] entry */ + zr->v4l_pend[zr->v4l_pend_head++ & V4L_MASK_FRAME] = num; + zr->v4l_buffers.buffer[num].state = BUZ_STATE_PEND; + zr->v4l_buffers.buffer[num].bs.length = + fh->v4l_settings.bytesperline * + zr->v4l_settings.height; + fh->buffers.buffer[num] = zr->v4l_buffers.buffer[num]; + break; + } + } + + spin_unlock_irqrestore(&zr->spinlock, flags); + + if (!res && zr->v4l_buffers.active == ZORAN_FREE) + zr->v4l_buffers.active = fh->buffers.active; + + return res; +} + +/* + * Sync on a V4L buffer + */ + +static int v4l_sync(struct zoran_fh *fh, int frame) +{ + struct zoran *zr = fh->zr; + unsigned long flags; + + if (fh->buffers.active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: %s - no grab active for this session\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + /* check passed-in frame number */ + if (frame >= fh->buffers.num_buffers || frame < 0) { + dprintk(1, + KERN_ERR "%s: %s - frame %d is invalid\n", + ZR_DEVNAME(zr), __func__, frame); + return -EINVAL; + } + + /* Check if is buffer was queued at all */ + if (zr->v4l_buffers.buffer[frame].state == BUZ_STATE_USER) { + dprintk(1, + KERN_ERR + "%s: %s - attempt to sync on a buffer which was not queued?\n", + ZR_DEVNAME(zr), __func__); + return -EPROTO; + } + + /* wait on this buffer to get ready */ + if (!wait_event_interruptible_timeout(zr->v4l_capq, + (zr->v4l_buffers.buffer[frame].state != BUZ_STATE_PEND), 10*HZ)) + return -ETIME; + if (signal_pending(current)) + return -ERESTARTSYS; + + /* buffer should now be in BUZ_STATE_DONE */ + if (zr->v4l_buffers.buffer[frame].state != BUZ_STATE_DONE) + dprintk(2, + KERN_ERR "%s: %s - internal state error\n", + ZR_DEVNAME(zr), __func__); + + zr->v4l_buffers.buffer[frame].state = BUZ_STATE_USER; + fh->buffers.buffer[frame] = zr->v4l_buffers.buffer[frame]; + + spin_lock_irqsave(&zr->spinlock, flags); + + /* Check if streaming capture has finished */ + if (zr->v4l_pend_tail == zr->v4l_pend_head) { + zr36057_set_memgrab(zr, 0); + if (zr->v4l_buffers.active == ZORAN_ACTIVE) { + fh->buffers.active = zr->v4l_buffers.active = ZORAN_FREE; + zr->v4l_buffers.allocated = 0; + } + } + + spin_unlock_irqrestore(&zr->spinlock, flags); + + return 0; +} + +/* + * Queue a MJPEG buffer for capture/playback + */ + +static int zoran_jpg_queue_frame(struct zoran_fh *fh, int num, + enum zoran_codec_mode mode) +{ + struct zoran *zr = fh->zr; + unsigned long flags; + int res = 0; + + /* Check if buffers are allocated */ + if (!fh->buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: %s - buffers not yet allocated\n", + ZR_DEVNAME(zr), __func__); + return -ENOMEM; + } + + /* No grabbing outside the buffer range! */ + if (num >= fh->buffers.num_buffers || num < 0) { + dprintk(1, + KERN_ERR + "%s: %s - buffer %d out of range\n", + ZR_DEVNAME(zr), __func__, num); + return -EINVAL; + } + + /* what is the codec mode right now? */ + if (zr->codec_mode == BUZ_MODE_IDLE) { + zr->jpg_settings = fh->jpg_settings; + } else if (zr->codec_mode != mode) { + /* wrong codec mode active - invalid */ + dprintk(1, + KERN_ERR + "%s: %s - codec in wrong mode\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + if (fh->buffers.active == ZORAN_FREE) { + if (zr->jpg_buffers.active == ZORAN_FREE) { + zr->jpg_buffers = fh->buffers; + fh->buffers.active = ZORAN_ACTIVE; + } else { + dprintk(1, + KERN_ERR + "%s: %s - another session is already capturing\n", + ZR_DEVNAME(zr), __func__); + res = -EBUSY; + } + } + + if (!res && zr->codec_mode == BUZ_MODE_IDLE) { + /* Ok load up the jpeg codec */ + zr36057_enable_jpg(zr, mode); + } + + spin_lock_irqsave(&zr->spinlock, flags); + + if (!res) { + switch (zr->jpg_buffers.buffer[num].state) { + case BUZ_STATE_DONE: + dprintk(2, + KERN_WARNING + "%s: %s - queing frame in BUZ_STATE_DONE state!?\n", + ZR_DEVNAME(zr), __func__); + case BUZ_STATE_USER: + /* since there is at least one unused buffer there's room for at + *least one more pend[] entry */ + zr->jpg_pend[zr->jpg_que_head++ & BUZ_MASK_FRAME] = num; + zr->jpg_buffers.buffer[num].state = BUZ_STATE_PEND; + fh->buffers.buffer[num] = zr->jpg_buffers.buffer[num]; + zoran_feed_stat_com(zr); + break; + default: + case BUZ_STATE_DMA: + case BUZ_STATE_PEND: + if (zr->jpg_buffers.active == ZORAN_FREE) { + fh->buffers.active = ZORAN_FREE; + zr->jpg_buffers.allocated = 0; + } + res = -EBUSY; /* what are you doing? */ + break; + } + } + + spin_unlock_irqrestore(&zr->spinlock, flags); + + if (!res && zr->jpg_buffers.active == ZORAN_FREE) + zr->jpg_buffers.active = fh->buffers.active; + + return res; +} + +static int jpg_qbuf(struct zoran_fh *fh, int frame, enum zoran_codec_mode mode) +{ + struct zoran *zr = fh->zr; + int res = 0; + + /* Does the user want to stop streaming? */ + if (frame < 0) { + if (zr->codec_mode == mode) { + if (fh->buffers.active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: %s(-1) - session not active\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + fh->buffers.active = zr->jpg_buffers.active = ZORAN_FREE; + zr->jpg_buffers.allocated = 0; + zr36057_enable_jpg(zr, BUZ_MODE_IDLE); + return 0; + } else { + dprintk(1, + KERN_ERR + "%s: %s - stop streaming but not in streaming mode\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + } + + if ((res = zoran_jpg_queue_frame(fh, frame, mode))) + return res; + + /* Start the jpeg codec when the first frame is queued */ + if (!res && zr->jpg_que_head == 1) + jpeg_start(zr); + + return res; +} + +/* + * Sync on a MJPEG buffer + */ + +static int jpg_sync(struct zoran_fh *fh, struct zoran_sync *bs) +{ + struct zoran *zr = fh->zr; + unsigned long flags; + int frame; + + if (fh->buffers.active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: %s - capture is not currently active\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + if (zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS && + zr->codec_mode != BUZ_MODE_MOTION_COMPRESS) { + dprintk(1, + KERN_ERR + "%s: %s - codec not in streaming mode\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + if (!wait_event_interruptible_timeout(zr->jpg_capq, + (zr->jpg_que_tail != zr->jpg_dma_tail || + zr->jpg_dma_tail == zr->jpg_dma_head), + 10*HZ)) { + int isr; + + btand(~ZR36057_JMC_Go_en, ZR36057_JMC); + udelay(1); + zr->codec->control(zr->codec, CODEC_G_STATUS, + sizeof(isr), &isr); + dprintk(1, + KERN_ERR + "%s: %s - timeout: codec isr=0x%02x\n", + ZR_DEVNAME(zr), __func__, isr); + + return -ETIME; + + } + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&zr->spinlock, flags); + + if (zr->jpg_dma_tail != zr->jpg_dma_head) + frame = zr->jpg_pend[zr->jpg_que_tail++ & BUZ_MASK_FRAME]; + else + frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME]; + + /* buffer should now be in BUZ_STATE_DONE */ + if (zr->jpg_buffers.buffer[frame].state != BUZ_STATE_DONE) + dprintk(2, + KERN_ERR "%s: %s - internal state error\n", + ZR_DEVNAME(zr), __func__); + + *bs = zr->jpg_buffers.buffer[frame].bs; + bs->frame = frame; + zr->jpg_buffers.buffer[frame].state = BUZ_STATE_USER; + fh->buffers.buffer[frame] = zr->jpg_buffers.buffer[frame]; + + spin_unlock_irqrestore(&zr->spinlock, flags); + + return 0; +} + +static void zoran_open_init_session(struct zoran_fh *fh) +{ + int i; + struct zoran *zr = fh->zr; + + /* Per default, map the V4L Buffers */ + map_mode_raw(fh); + + /* take over the card's current settings */ + fh->overlay_settings = zr->overlay_settings; + fh->overlay_settings.is_set = 0; + fh->overlay_settings.format = zr->overlay_settings.format; + fh->overlay_active = ZORAN_FREE; + + /* v4l settings */ + fh->v4l_settings = zr->v4l_settings; + /* jpg settings */ + fh->jpg_settings = zr->jpg_settings; + + /* buffers */ + memset(&fh->buffers, 0, sizeof(fh->buffers)); + for (i = 0; i < MAX_FRAME; i++) { + fh->buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + fh->buffers.buffer[i].bs.frame = i; + } + fh->buffers.allocated = 0; + fh->buffers.active = ZORAN_FREE; +} + +static void zoran_close_end_session(struct zoran_fh *fh) +{ + struct zoran *zr = fh->zr; + + /* overlay */ + if (fh->overlay_active != ZORAN_FREE) { + fh->overlay_active = zr->overlay_active = ZORAN_FREE; + zr->v4l_overlay_active = 0; + if (!zr->v4l_memgrab_active) + zr36057_overlay(zr, 0); + zr->overlay_mask = NULL; + } + + if (fh->map_mode == ZORAN_MAP_MODE_RAW) { + /* v4l capture */ + if (fh->buffers.active != ZORAN_FREE) { + unsigned long flags; + + spin_lock_irqsave(&zr->spinlock, flags); + zr36057_set_memgrab(zr, 0); + zr->v4l_buffers.allocated = 0; + zr->v4l_buffers.active = fh->buffers.active = ZORAN_FREE; + spin_unlock_irqrestore(&zr->spinlock, flags); + } + + /* v4l buffers */ + if (fh->buffers.allocated) + v4l_fbuffer_free(fh); + } else { + /* jpg capture */ + if (fh->buffers.active != ZORAN_FREE) { + zr36057_enable_jpg(zr, BUZ_MODE_IDLE); + zr->jpg_buffers.allocated = 0; + zr->jpg_buffers.active = fh->buffers.active = ZORAN_FREE; + } + + /* jpg buffers */ + if (fh->buffers.allocated) + jpg_fbuffer_free(fh); + } +} + +/* + * Open a zoran card. Right now the flags stuff is just playing + */ + +static int zoran_open(struct file *file) +{ + struct zoran *zr = video_drvdata(file); + struct zoran_fh *fh; + int res, first_open = 0; + + dprintk(2, KERN_INFO "%s: %s(%s, pid=[%d]), users(-)=%d\n", + ZR_DEVNAME(zr), __func__, current->comm, task_pid_nr(current), zr->user + 1); + + mutex_lock(&zr->other_lock); + + if (zr->user >= 2048) { + dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", + ZR_DEVNAME(zr), zr->user); + res = -EBUSY; + goto fail_unlock; + } + + /* now, create the open()-specific file_ops struct */ + fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL); + if (!fh) { + dprintk(1, + KERN_ERR + "%s: %s - allocation of zoran_fh failed\n", + ZR_DEVNAME(zr), __func__); + res = -ENOMEM; + goto fail_unlock; + } + /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows + * on norm-change! */ + fh->overlay_mask = + kmalloc(((768 + 31) / 32) * 576 * 4, GFP_KERNEL); + if (!fh->overlay_mask) { + dprintk(1, + KERN_ERR + "%s: %s - allocation of overlay_mask failed\n", + ZR_DEVNAME(zr), __func__); + res = -ENOMEM; + goto fail_fh; + } + + if (zr->user++ == 0) + first_open = 1; + + /*mutex_unlock(&zr->resource_lock);*/ + + /* default setup - TODO: look at flags */ + if (first_open) { /* First device open */ + zr36057_restart(zr); + zoran_open_init_params(zr); + zoran_init_hardware(zr); + + btor(ZR36057_ICR_IntPinEn, ZR36057_ICR); + } + + /* set file_ops stuff */ + file->private_data = fh; + fh->zr = zr; + zoran_open_init_session(fh); + mutex_unlock(&zr->other_lock); + + return 0; + +fail_fh: + kfree(fh); +fail_unlock: + mutex_unlock(&zr->other_lock); + + dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n", + ZR_DEVNAME(zr), res, zr->user); + + return res; +} + +static int +zoran_close(struct file *file) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + + dprintk(2, KERN_INFO "%s: %s(%s, pid=[%d]), users(+)=%d\n", + ZR_DEVNAME(zr), __func__, current->comm, task_pid_nr(current), zr->user - 1); + + /* kernel locks (fs/device.c), so don't do that ourselves + * (prevents deadlocks) */ + mutex_lock(&zr->other_lock); + + zoran_close_end_session(fh); + + if (zr->user-- == 1) { /* Last process */ + /* Clean up JPEG process */ + wake_up_interruptible(&zr->jpg_capq); + zr36057_enable_jpg(zr, BUZ_MODE_IDLE); + zr->jpg_buffers.allocated = 0; + zr->jpg_buffers.active = ZORAN_FREE; + + /* disable interrupts */ + btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); + + if (zr36067_debug > 1) + print_interrupts(zr); + + /* Overlay off */ + zr->v4l_overlay_active = 0; + zr36057_overlay(zr, 0); + zr->overlay_mask = NULL; + + /* capture off */ + wake_up_interruptible(&zr->v4l_capq); + zr36057_set_memgrab(zr, 0); + zr->v4l_buffers.allocated = 0; + zr->v4l_buffers.active = ZORAN_FREE; + zoran_set_pci_master(zr, 0); + + if (!pass_through) { /* Switch to color bar */ + decoder_call(zr, video, s_stream, 0); + encoder_call(zr, video, s_routing, 2, 0, 0); + } + } + mutex_unlock(&zr->other_lock); + + file->private_data = NULL; + kfree(fh->overlay_mask); + kfree(fh); + + dprintk(4, KERN_INFO "%s: %s done\n", ZR_DEVNAME(zr), __func__); + + return 0; +} + + +static ssize_t +zoran_read (struct file *file, + char __user *data, + size_t count, + loff_t *ppos) +{ + /* we simply don't support read() (yet)... */ + + return -EINVAL; +} + +static ssize_t +zoran_write (struct file *file, + const char __user *data, + size_t count, + loff_t *ppos) +{ + /* ...and the same goes for write() */ + + return -EINVAL; +} + +static int setup_fbuffer(struct zoran_fh *fh, + void *base, + const struct zoran_format *fmt, + int width, + int height, + int bytesperline) +{ + struct zoran *zr = fh->zr; + + /* (Ronald) v4l/v4l2 guidelines */ + if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* Don't allow frame buffer overlay if PCI or AGP is buggy, or on + ALi Magik (that needs very low latency while the card needs a + higher value always) */ + + if (pci_pci_problems & (PCIPCI_FAIL | PCIAGP_FAIL | PCIPCI_ALIMAGIK)) + return -ENXIO; + + /* we need a bytesperline value, even if not given */ + if (!bytesperline) + bytesperline = width * ((fmt->depth + 7) & ~7) / 8; + +#if 0 + if (zr->overlay_active) { + /* dzjee... stupid users... don't even bother to turn off + * overlay before changing the memory location... + * normally, we would return errors here. However, one of + * the tools that does this is... xawtv! and since xawtv + * is used by +/- 99% of the users, we'd rather be user- + * friendly and silently do as if nothing went wrong */ + dprintk(3, + KERN_ERR + "%s: %s - forced overlay turnoff because framebuffer changed\n", + ZR_DEVNAME(zr), __func__); + zr36057_overlay(zr, 0); + } +#endif + + if (!(fmt->flags & ZORAN_FORMAT_OVERLAY)) { + dprintk(1, + KERN_ERR + "%s: %s - no valid overlay format given\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + if (height <= 0 || width <= 0 || bytesperline <= 0) { + dprintk(1, + KERN_ERR + "%s: %s - invalid height/width/bpl value (%d|%d|%d)\n", + ZR_DEVNAME(zr), __func__, width, height, bytesperline); + return -EINVAL; + } + if (bytesperline & 3) { + dprintk(1, + KERN_ERR + "%s: %s - bytesperline (%d) must be 4-byte aligned\n", + ZR_DEVNAME(zr), __func__, bytesperline); + return -EINVAL; + } + + zr->vbuf_base = (void *) ((unsigned long) base & ~3); + zr->vbuf_height = height; + zr->vbuf_width = width; + zr->vbuf_depth = fmt->depth; + zr->overlay_settings.format = fmt; + zr->vbuf_bytesperline = bytesperline; + + /* The user should set new window parameters */ + zr->overlay_settings.is_set = 0; + + return 0; +} + + +static int setup_window(struct zoran_fh *fh, + int x, + int y, + int width, + int height, + struct v4l2_clip __user *clips, + unsigned int clipcount, + void __user *bitmap) +{ + struct zoran *zr = fh->zr; + struct v4l2_clip *vcp = NULL; + int on, end; + + + if (!zr->vbuf_base) { + dprintk(1, + KERN_ERR + "%s: %s - frame buffer has to be set first\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + if (!fh->overlay_settings.format) { + dprintk(1, + KERN_ERR + "%s: %s - no overlay format set\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + if (clipcount > 2048) { + dprintk(1, + KERN_ERR + "%s: %s - invalid clipcount\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + /* + * The video front end needs 4-byte alinged line sizes, we correct that + * silently here if necessary + */ + if (zr->vbuf_depth == 15 || zr->vbuf_depth == 16) { + end = (x + width) & ~1; /* round down */ + x = (x + 1) & ~1; /* round up */ + width = end - x; + } + + if (zr->vbuf_depth == 24) { + end = (x + width) & ~3; /* round down */ + x = (x + 3) & ~3; /* round up */ + width = end - x; + } + + if (width > BUZ_MAX_WIDTH) + width = BUZ_MAX_WIDTH; + if (height > BUZ_MAX_HEIGHT) + height = BUZ_MAX_HEIGHT; + + /* Check for invalid parameters */ + if (width < BUZ_MIN_WIDTH || height < BUZ_MIN_HEIGHT || + width > BUZ_MAX_WIDTH || height > BUZ_MAX_HEIGHT) { + dprintk(1, + KERN_ERR + "%s: %s - width = %d or height = %d invalid\n", + ZR_DEVNAME(zr), __func__, width, height); + return -EINVAL; + } + + fh->overlay_settings.x = x; + fh->overlay_settings.y = y; + fh->overlay_settings.width = width; + fh->overlay_settings.height = height; + fh->overlay_settings.clipcount = clipcount; + + /* + * If an overlay is running, we have to switch it off + * and switch it on again in order to get the new settings in effect. + * + * We also want to avoid that the overlay mask is written + * when an overlay is running. + */ + + on = zr->v4l_overlay_active && !zr->v4l_memgrab_active && + zr->overlay_active != ZORAN_FREE && + fh->overlay_active != ZORAN_FREE; + if (on) + zr36057_overlay(zr, 0); + + /* + * Write the overlay mask if clips are wanted. + * We prefer a bitmap. + */ + if (bitmap) { + /* fake value - it just means we want clips */ + fh->overlay_settings.clipcount = 1; + + if (copy_from_user(fh->overlay_mask, bitmap, + (width * height + 7) / 8)) { + return -EFAULT; + } + } else if (clipcount) { + /* write our own bitmap from the clips */ + vcp = vmalloc(sizeof(struct v4l2_clip) * (clipcount + 4)); + if (vcp == NULL) { + dprintk(1, + KERN_ERR + "%s: %s - Alloc of clip mask failed\n", + ZR_DEVNAME(zr), __func__); + return -ENOMEM; + } + if (copy_from_user + (vcp, clips, sizeof(struct v4l2_clip) * clipcount)) { + vfree(vcp); + return -EFAULT; + } + write_overlay_mask(fh, vcp, clipcount); + vfree(vcp); + } + + fh->overlay_settings.is_set = 1; + if (fh->overlay_active != ZORAN_FREE && + zr->overlay_active != ZORAN_FREE) + zr->overlay_settings = fh->overlay_settings; + + if (on) + zr36057_overlay(zr, 1); + + /* Make sure the changes come into effect */ + return wait_grab_pending(zr); +} + +static int setup_overlay(struct zoran_fh *fh, int on) +{ + struct zoran *zr = fh->zr; + + /* If there is nothing to do, return immediately */ + if ((on && fh->overlay_active != ZORAN_FREE) || + (!on && fh->overlay_active == ZORAN_FREE)) + return 0; + + /* check whether we're touching someone else's overlay */ + if (on && zr->overlay_active != ZORAN_FREE && + fh->overlay_active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: %s - overlay is already active for another session\n", + ZR_DEVNAME(zr), __func__); + return -EBUSY; + } + if (!on && zr->overlay_active != ZORAN_FREE && + fh->overlay_active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: %s - you cannot cancel someone else's session\n", + ZR_DEVNAME(zr), __func__); + return -EPERM; + } + + if (on == 0) { + zr->overlay_active = fh->overlay_active = ZORAN_FREE; + zr->v4l_overlay_active = 0; + /* When a grab is running, the video simply + * won't be switched on any more */ + if (!zr->v4l_memgrab_active) + zr36057_overlay(zr, 0); + zr->overlay_mask = NULL; + } else { + if (!zr->vbuf_base || !fh->overlay_settings.is_set) { + dprintk(1, + KERN_ERR + "%s: %s - buffer or window not set\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + if (!fh->overlay_settings.format) { + dprintk(1, + KERN_ERR + "%s: %s - no overlay format set\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + zr->overlay_active = fh->overlay_active = ZORAN_LOCKED; + zr->v4l_overlay_active = 1; + zr->overlay_mask = fh->overlay_mask; + zr->overlay_settings = fh->overlay_settings; + if (!zr->v4l_memgrab_active) + zr36057_overlay(zr, 1); + /* When a grab is running, the video will be + * switched on when grab is finished */ + } + + /* Make sure the changes come into effect */ + return wait_grab_pending(zr); +} + +/* get the status of a buffer in the clients buffer queue */ +static int zoran_v4l2_buffer_status(struct zoran_fh *fh, + struct v4l2_buffer *buf, int num) +{ + struct zoran *zr = fh->zr; + unsigned long flags; + + buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: + /* check range */ + if (num < 0 || num >= fh->buffers.num_buffers || + !fh->buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: %s - wrong number or buffers not allocated\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + spin_lock_irqsave(&zr->spinlock, flags); + dprintk(3, + KERN_DEBUG + "%s: %s() - raw active=%c, buffer %d: state=%c, map=%c\n", + ZR_DEVNAME(zr), __func__, + "FAL"[fh->buffers.active], num, + "UPMD"[zr->v4l_buffers.buffer[num].state], + fh->buffers.buffer[num].map ? 'Y' : 'N'); + spin_unlock_irqrestore(&zr->spinlock, flags); + + buf->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf->length = fh->buffers.buffer_size; + + /* get buffer */ + buf->bytesused = fh->buffers.buffer[num].bs.length; + if (fh->buffers.buffer[num].state == BUZ_STATE_DONE || + fh->buffers.buffer[num].state == BUZ_STATE_USER) { + buf->sequence = fh->buffers.buffer[num].bs.seq; + buf->flags |= V4L2_BUF_FLAG_DONE; + buf->timestamp = fh->buffers.buffer[num].bs.timestamp; + } else { + buf->flags |= V4L2_BUF_FLAG_QUEUED; + } + + if (fh->v4l_settings.height <= BUZ_MAX_HEIGHT / 2) + buf->field = V4L2_FIELD_TOP; + else + buf->field = V4L2_FIELD_INTERLACED; + + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + + /* check range */ + if (num < 0 || num >= fh->buffers.num_buffers || + !fh->buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: %s - wrong number or buffers not allocated\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + buf->type = (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) ? + V4L2_BUF_TYPE_VIDEO_CAPTURE : + V4L2_BUF_TYPE_VIDEO_OUTPUT; + buf->length = fh->buffers.buffer_size; + + /* these variables are only written after frame has been captured */ + if (fh->buffers.buffer[num].state == BUZ_STATE_DONE || + fh->buffers.buffer[num].state == BUZ_STATE_USER) { + buf->sequence = fh->buffers.buffer[num].bs.seq; + buf->timestamp = fh->buffers.buffer[num].bs.timestamp; + buf->bytesused = fh->buffers.buffer[num].bs.length; + buf->flags |= V4L2_BUF_FLAG_DONE; + } else { + buf->flags |= V4L2_BUF_FLAG_QUEUED; + } + + /* which fields are these? */ + if (fh->jpg_settings.TmpDcm != 1) + buf->field = fh->jpg_settings.odd_even ? + V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM; + else + buf->field = fh->jpg_settings.odd_even ? + V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT; + + break; + + default: + + dprintk(5, + KERN_ERR + "%s: %s - invalid buffer type|map_mode (%d|%d)\n", + ZR_DEVNAME(zr), __func__, buf->type, fh->map_mode); + return -EINVAL; + } + + buf->memory = V4L2_MEMORY_MMAP; + buf->index = num; + buf->m.offset = buf->length * num; + + return 0; +} + +static int +zoran_set_norm (struct zoran *zr, + v4l2_std_id norm) +{ + int on; + + if (zr->v4l_buffers.active != ZORAN_FREE || + zr->jpg_buffers.active != ZORAN_FREE) { + dprintk(1, + KERN_WARNING + "%s: %s called while in playback/capture mode\n", + ZR_DEVNAME(zr), __func__); + return -EBUSY; + } + + if (!(norm & zr->card.norms)) { + dprintk(1, + KERN_ERR "%s: %s - unsupported norm %llx\n", + ZR_DEVNAME(zr), __func__, norm); + return -EINVAL; + } + + if (norm == V4L2_STD_ALL) { + unsigned int status = 0; + v4l2_std_id std = 0; + + decoder_call(zr, video, querystd, &std); + decoder_call(zr, core, s_std, std); + + /* let changes come into effect */ + ssleep(2); + + decoder_call(zr, video, g_input_status, &status); + if (status & V4L2_IN_ST_NO_SIGNAL) { + dprintk(1, + KERN_ERR + "%s: %s - no norm detected\n", + ZR_DEVNAME(zr), __func__); + /* reset norm */ + decoder_call(zr, core, s_std, zr->norm); + return -EIO; + } + + norm = std; + } + if (norm & V4L2_STD_SECAM) + zr->timing = zr->card.tvn[2]; + else if (norm & V4L2_STD_NTSC) + zr->timing = zr->card.tvn[1]; + else + zr->timing = zr->card.tvn[0]; + + /* We switch overlay off and on since a change in the + * norm needs different VFE settings */ + on = zr->overlay_active && !zr->v4l_memgrab_active; + if (on) + zr36057_overlay(zr, 0); + + decoder_call(zr, core, s_std, norm); + encoder_call(zr, video, s_std_output, norm); + + if (on) + zr36057_overlay(zr, 1); + + /* Make sure the changes come into effect */ + zr->norm = norm; + + return 0; +} + +static int +zoran_set_input (struct zoran *zr, + int input) +{ + if (input == zr->input) { + return 0; + } + + if (zr->v4l_buffers.active != ZORAN_FREE || + zr->jpg_buffers.active != ZORAN_FREE) { + dprintk(1, + KERN_WARNING + "%s: %s called while in playback/capture mode\n", + ZR_DEVNAME(zr), __func__); + return -EBUSY; + } + + if (input < 0 || input >= zr->card.inputs) { + dprintk(1, + KERN_ERR + "%s: %s - unnsupported input %d\n", + ZR_DEVNAME(zr), __func__, input); + return -EINVAL; + } + + zr->input = input; + + decoder_call(zr, video, s_routing, + zr->card.input[input].muxsel, 0, 0); + + return 0; +} + +/* + * ioctl routine + */ + +static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability *cap) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + memset(cap, 0, sizeof(*cap)); + strncpy(cap->card, ZR_DEVNAME(zr), sizeof(cap->card)-1); + strncpy(cap->driver, "zoran", sizeof(cap->driver)-1); + snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", + pci_name(zr->pci_dev)); + cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OVERLAY; + return 0; +} + +static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag) +{ + unsigned int num, i; + + for (num = i = 0; i < NUM_FORMATS; i++) { + if (zoran_formats[i].flags & flag && num++ == fmt->index) { + strncpy(fmt->description, zoran_formats[i].name, + sizeof(fmt->description) - 1); + /* fmt struct pre-zeroed, so adding '\0' not needed */ + fmt->pixelformat = zoran_formats[i].fourcc; + if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + return 0; + } + } + return -EINVAL; +} + +static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh, + struct v4l2_fmtdesc *f) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + return zoran_enum_fmt(zr, f, ZORAN_FORMAT_CAPTURE); +} + +static int zoran_enum_fmt_vid_out(struct file *file, void *__fh, + struct v4l2_fmtdesc *f) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + return zoran_enum_fmt(zr, f, ZORAN_FORMAT_PLAYBACK); +} + +static int zoran_enum_fmt_vid_overlay(struct file *file, void *__fh, + struct v4l2_fmtdesc *f) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + return zoran_enum_fmt(zr, f, ZORAN_FORMAT_OVERLAY); +} + +static int zoran_g_fmt_vid_out(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + mutex_lock(&zr->resource_lock); + + fmt->fmt.pix.width = fh->jpg_settings.img_width / fh->jpg_settings.HorDcm; + fmt->fmt.pix.height = fh->jpg_settings.img_height * 2 / + (fh->jpg_settings.VerDcm * fh->jpg_settings.TmpDcm); + fmt->fmt.pix.sizeimage = zoran_v4l2_calc_bufsize(&fh->jpg_settings); + fmt->fmt.pix.pixelformat = V4L2_PIX_FMT_MJPEG; + if (fh->jpg_settings.TmpDcm == 1) + fmt->fmt.pix.field = (fh->jpg_settings.odd_even ? + V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT); + else + fmt->fmt.pix.field = (fh->jpg_settings.odd_even ? + V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM); + fmt->fmt.pix.bytesperline = 0; + fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + + mutex_unlock(&zr->resource_lock); + return 0; +} + +static int zoran_g_fmt_vid_cap(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + if (fh->map_mode != ZORAN_MAP_MODE_RAW) + return zoran_g_fmt_vid_out(file, fh, fmt); + + mutex_lock(&zr->resource_lock); + fmt->fmt.pix.width = fh->v4l_settings.width; + fmt->fmt.pix.height = fh->v4l_settings.height; + fmt->fmt.pix.sizeimage = fh->v4l_settings.bytesperline * + fh->v4l_settings.height; + fmt->fmt.pix.pixelformat = fh->v4l_settings.format->fourcc; + fmt->fmt.pix.colorspace = fh->v4l_settings.format->colorspace; + fmt->fmt.pix.bytesperline = fh->v4l_settings.bytesperline; + if (BUZ_MAX_HEIGHT < (fh->v4l_settings.height * 2)) + fmt->fmt.pix.field = V4L2_FIELD_INTERLACED; + else + fmt->fmt.pix.field = V4L2_FIELD_TOP; + mutex_unlock(&zr->resource_lock); + return 0; +} + +static int zoran_g_fmt_vid_overlay(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + mutex_lock(&zr->resource_lock); + + fmt->fmt.win.w.left = fh->overlay_settings.x; + fmt->fmt.win.w.top = fh->overlay_settings.y; + fmt->fmt.win.w.width = fh->overlay_settings.width; + fmt->fmt.win.w.height = fh->overlay_settings.height; + if (fh->overlay_settings.width * 2 > BUZ_MAX_HEIGHT) + fmt->fmt.win.field = V4L2_FIELD_INTERLACED; + else + fmt->fmt.win.field = V4L2_FIELD_TOP; + + mutex_unlock(&zr->resource_lock); + return 0; +} + +static int zoran_try_fmt_vid_overlay(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + mutex_lock(&zr->resource_lock); + + if (fmt->fmt.win.w.width > BUZ_MAX_WIDTH) + fmt->fmt.win.w.width = BUZ_MAX_WIDTH; + if (fmt->fmt.win.w.width < BUZ_MIN_WIDTH) + fmt->fmt.win.w.width = BUZ_MIN_WIDTH; + if (fmt->fmt.win.w.height > BUZ_MAX_HEIGHT) + fmt->fmt.win.w.height = BUZ_MAX_HEIGHT; + if (fmt->fmt.win.w.height < BUZ_MIN_HEIGHT) + fmt->fmt.win.w.height = BUZ_MIN_HEIGHT; + + mutex_unlock(&zr->resource_lock); + return 0; +} + +static int zoran_try_fmt_vid_out(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + struct zoran_jpg_settings settings; + int res = 0; + + if (fmt->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) + return -EINVAL; + + mutex_lock(&zr->resource_lock); + settings = fh->jpg_settings; + + /* we actually need to set 'real' parameters now */ + if ((fmt->fmt.pix.height * 2) > BUZ_MAX_HEIGHT) + settings.TmpDcm = 1; + else + settings.TmpDcm = 2; + settings.decimation = 0; + if (fmt->fmt.pix.height <= fh->jpg_settings.img_height / 2) + settings.VerDcm = 2; + else + settings.VerDcm = 1; + if (fmt->fmt.pix.width <= fh->jpg_settings.img_width / 4) + settings.HorDcm = 4; + else if (fmt->fmt.pix.width <= fh->jpg_settings.img_width / 2) + settings.HorDcm = 2; + else + settings.HorDcm = 1; + if (settings.TmpDcm == 1) + settings.field_per_buff = 2; + else + settings.field_per_buff = 1; + + if (settings.HorDcm > 1) { + settings.img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; + settings.img_width = (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; + } else { + settings.img_x = 0; + settings.img_width = BUZ_MAX_WIDTH; + } + + /* check */ + res = zoran_check_jpg_settings(zr, &settings, 1); + if (res) + goto tryfmt_unlock_and_return; + + /* tell the user what we actually did */ + fmt->fmt.pix.width = settings.img_width / settings.HorDcm; + fmt->fmt.pix.height = settings.img_height * 2 / + (settings.TmpDcm * settings.VerDcm); + if (settings.TmpDcm == 1) + fmt->fmt.pix.field = (fh->jpg_settings.odd_even ? + V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT); + else + fmt->fmt.pix.field = (fh->jpg_settings.odd_even ? + V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM); + + fmt->fmt.pix.sizeimage = zoran_v4l2_calc_bufsize(&settings); + fmt->fmt.pix.bytesperline = 0; + fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; +tryfmt_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; +} + +static int zoran_try_fmt_vid_cap(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int bpp; + int i; + + if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG) + return zoran_try_fmt_vid_out(file, fh, fmt); + + mutex_lock(&zr->resource_lock); + + for (i = 0; i < NUM_FORMATS; i++) + if (zoran_formats[i].fourcc == fmt->fmt.pix.pixelformat) + break; + + if (i == NUM_FORMATS) { + mutex_unlock(&zr->resource_lock); + return -EINVAL; + } + + bpp = DIV_ROUND_UP(zoran_formats[i].depth, 8); + v4l_bound_align_image( + &fmt->fmt.pix.width, BUZ_MIN_WIDTH, BUZ_MAX_WIDTH, bpp == 2 ? 1 : 2, + &fmt->fmt.pix.height, BUZ_MIN_HEIGHT, BUZ_MAX_HEIGHT, 0, 0); + mutex_unlock(&zr->resource_lock); + + return 0; +} + +static int zoran_s_fmt_vid_overlay(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res; + + dprintk(3, "x=%d, y=%d, w=%d, h=%d, cnt=%d, map=0x%p\n", + fmt->fmt.win.w.left, fmt->fmt.win.w.top, + fmt->fmt.win.w.width, + fmt->fmt.win.w.height, + fmt->fmt.win.clipcount, + fmt->fmt.win.bitmap); + mutex_lock(&zr->resource_lock); + res = setup_window(fh, fmt->fmt.win.w.left, fmt->fmt.win.w.top, + fmt->fmt.win.w.width, fmt->fmt.win.w.height, + (struct v4l2_clip __user *)fmt->fmt.win.clips, + fmt->fmt.win.clipcount, fmt->fmt.win.bitmap); + mutex_unlock(&zr->resource_lock); + return res; +} + +static int zoran_s_fmt_vid_out(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + __le32 printformat = __cpu_to_le32(fmt->fmt.pix.pixelformat); + struct zoran_jpg_settings settings; + int res = 0; + + dprintk(3, "size=%dx%d, fmt=0x%x (%4.4s)\n", + fmt->fmt.pix.width, fmt->fmt.pix.height, + fmt->fmt.pix.pixelformat, + (char *) &printformat); + if (fmt->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) + return -EINVAL; + + mutex_lock(&zr->resource_lock); + + if (fh->buffers.allocated) { + dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - cannot change capture mode\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto sfmtjpg_unlock_and_return; + } + + settings = fh->jpg_settings; + + /* we actually need to set 'real' parameters now */ + if (fmt->fmt.pix.height * 2 > BUZ_MAX_HEIGHT) + settings.TmpDcm = 1; + else + settings.TmpDcm = 2; + settings.decimation = 0; + if (fmt->fmt.pix.height <= fh->jpg_settings.img_height / 2) + settings.VerDcm = 2; + else + settings.VerDcm = 1; + if (fmt->fmt.pix.width <= fh->jpg_settings.img_width / 4) + settings.HorDcm = 4; + else if (fmt->fmt.pix.width <= fh->jpg_settings.img_width / 2) + settings.HorDcm = 2; + else + settings.HorDcm = 1; + if (settings.TmpDcm == 1) + settings.field_per_buff = 2; + else + settings.field_per_buff = 1; + + if (settings.HorDcm > 1) { + settings.img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; + settings.img_width = (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; + } else { + settings.img_x = 0; + settings.img_width = BUZ_MAX_WIDTH; + } + + /* check */ + res = zoran_check_jpg_settings(zr, &settings, 0); + if (res) + goto sfmtjpg_unlock_and_return; + + /* it's ok, so set them */ + fh->jpg_settings = settings; + + map_mode_jpg(fh, fmt->type == V4L2_BUF_TYPE_VIDEO_OUTPUT); + fh->buffers.buffer_size = zoran_v4l2_calc_bufsize(&fh->jpg_settings); + + /* tell the user what we actually did */ + fmt->fmt.pix.width = settings.img_width / settings.HorDcm; + fmt->fmt.pix.height = settings.img_height * 2 / + (settings.TmpDcm * settings.VerDcm); + if (settings.TmpDcm == 1) + fmt->fmt.pix.field = (fh->jpg_settings.odd_even ? + V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT); + else + fmt->fmt.pix.field = (fh->jpg_settings.odd_even ? + V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM); + fmt->fmt.pix.bytesperline = 0; + fmt->fmt.pix.sizeimage = fh->buffers.buffer_size; + fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + +sfmtjpg_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; +} + +static int zoran_s_fmt_vid_cap(struct file *file, void *__fh, + struct v4l2_format *fmt) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int i; + int res = 0; + + if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG) + return zoran_s_fmt_vid_out(file, fh, fmt); + + for (i = 0; i < NUM_FORMATS; i++) + if (fmt->fmt.pix.pixelformat == zoran_formats[i].fourcc) + break; + if (i == NUM_FORMATS) { + dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - unknown/unsupported format 0x%x\n", + ZR_DEVNAME(zr), fmt->fmt.pix.pixelformat); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + + if ((fh->map_mode != ZORAN_MAP_MODE_RAW && fh->buffers.allocated) || + fh->buffers.active != ZORAN_FREE) { + dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - cannot change capture mode\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto sfmtv4l_unlock_and_return; + } + if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT) + fmt->fmt.pix.height = BUZ_MAX_HEIGHT; + if (fmt->fmt.pix.width > BUZ_MAX_WIDTH) + fmt->fmt.pix.width = BUZ_MAX_WIDTH; + + map_mode_raw(fh); + + res = zoran_v4l_set_format(fh, fmt->fmt.pix.width, fmt->fmt.pix.height, + &zoran_formats[i]); + if (res) + goto sfmtv4l_unlock_and_return; + + /* tell the user the results/missing stuff */ + fmt->fmt.pix.bytesperline = fh->v4l_settings.bytesperline; + fmt->fmt.pix.sizeimage = fh->v4l_settings.height * fh->v4l_settings.bytesperline; + fmt->fmt.pix.colorspace = fh->v4l_settings.format->colorspace; + if (BUZ_MAX_HEIGHT < (fh->v4l_settings.height * 2)) + fmt->fmt.pix.field = V4L2_FIELD_INTERLACED; + else + fmt->fmt.pix.field = V4L2_FIELD_TOP; + +sfmtv4l_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; +} + +static int zoran_g_fbuf(struct file *file, void *__fh, + struct v4l2_framebuffer *fb) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + memset(fb, 0, sizeof(*fb)); + mutex_lock(&zr->resource_lock); + fb->base = zr->vbuf_base; + fb->fmt.width = zr->vbuf_width; + fb->fmt.height = zr->vbuf_height; + if (zr->overlay_settings.format) + fb->fmt.pixelformat = fh->overlay_settings.format->fourcc; + fb->fmt.bytesperline = zr->vbuf_bytesperline; + mutex_unlock(&zr->resource_lock); + fb->fmt.colorspace = V4L2_COLORSPACE_SRGB; + fb->fmt.field = V4L2_FIELD_INTERLACED; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; + + return 0; +} + +static int zoran_s_fbuf(struct file *file, void *__fh, + const struct v4l2_framebuffer *fb) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int i, res = 0; + __le32 printformat = __cpu_to_le32(fb->fmt.pixelformat); + + for (i = 0; i < NUM_FORMATS; i++) + if (zoran_formats[i].fourcc == fb->fmt.pixelformat) + break; + if (i == NUM_FORMATS) { + dprintk(1, KERN_ERR "%s: VIDIOC_S_FBUF - format=0x%x (%4.4s) not allowed\n", + ZR_DEVNAME(zr), fb->fmt.pixelformat, + (char *)&printformat); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + res = setup_fbuffer(fh, fb->base, &zoran_formats[i], fb->fmt.width, + fb->fmt.height, fb->fmt.bytesperline); + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_overlay(struct file *file, void *__fh, unsigned int on) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res; + + mutex_lock(&zr->resource_lock); + res = setup_overlay(fh, on); + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type); + +static int zoran_reqbufs(struct file *file, void *__fh, struct v4l2_requestbuffers *req) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res = 0; + + if (req->memory != V4L2_MEMORY_MMAP) { + dprintk(2, + KERN_ERR + "%s: only MEMORY_MMAP capture is supported, not %d\n", + ZR_DEVNAME(zr), req->memory); + return -EINVAL; + } + + if (req->count == 0) + return zoran_streamoff(file, fh, req->type); + + mutex_lock(&zr->resource_lock); + if (fh->buffers.allocated) { + dprintk(2, + KERN_ERR + "%s: VIDIOC_REQBUFS - buffers already allocated\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto v4l2reqbuf_unlock_and_return; + } + + if (fh->map_mode == ZORAN_MAP_MODE_RAW && + req->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + /* control user input */ + if (req->count < 2) + req->count = 2; + if (req->count > v4l_nbufs) + req->count = v4l_nbufs; + + /* The next mmap will map the V4L buffers */ + map_mode_raw(fh); + fh->buffers.num_buffers = req->count; + + if (v4l_fbuffer_alloc(fh)) { + res = -ENOMEM; + goto v4l2reqbuf_unlock_and_return; + } + } else if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC || + fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) { + /* we need to calculate size ourselves now */ + if (req->count < 4) + req->count = 4; + if (req->count > jpg_nbufs) + req->count = jpg_nbufs; + + /* The next mmap will map the MJPEG buffers */ + map_mode_jpg(fh, req->type == V4L2_BUF_TYPE_VIDEO_OUTPUT); + fh->buffers.num_buffers = req->count; + fh->buffers.buffer_size = zoran_v4l2_calc_bufsize(&fh->jpg_settings); + + if (jpg_fbuffer_alloc(fh)) { + res = -ENOMEM; + goto v4l2reqbuf_unlock_and_return; + } + } else { + dprintk(1, + KERN_ERR + "%s: VIDIOC_REQBUFS - unknown type %d\n", + ZR_DEVNAME(zr), req->type); + res = -EINVAL; + goto v4l2reqbuf_unlock_and_return; + } +v4l2reqbuf_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res; + + mutex_lock(&zr->resource_lock); + res = zoran_v4l2_buffer_status(fh, buf, buf->index); + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_qbuf(struct file *file, void *__fh, struct v4l2_buffer *buf) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res = 0, codec_mode, buf_type; + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dprintk(1, KERN_ERR + "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + res = -EINVAL; + goto qbuf_unlock_and_return; + } + + res = zoran_v4l_queue_frame(fh, buf->index); + if (res) + goto qbuf_unlock_and_return; + if (!zr->v4l_memgrab_active && fh->buffers.active == ZORAN_LOCKED) + zr36057_set_memgrab(zr, 1); + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + if (fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) { + buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + codec_mode = BUZ_MODE_MOTION_DECOMPRESS; + } else { + buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + codec_mode = BUZ_MODE_MOTION_COMPRESS; + } + + if (buf->type != buf_type) { + dprintk(1, KERN_ERR + "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + res = -EINVAL; + goto qbuf_unlock_and_return; + } + + res = zoran_jpg_queue_frame(fh, buf->index, codec_mode); + if (res != 0) + goto qbuf_unlock_and_return; + if (zr->codec_mode == BUZ_MODE_IDLE && + fh->buffers.active == ZORAN_LOCKED) + zr36057_enable_jpg(zr, codec_mode); + + break; + + default: + dprintk(1, KERN_ERR + "%s: VIDIOC_QBUF - unsupported type %d\n", + ZR_DEVNAME(zr), buf->type); + res = -EINVAL; + break; + } +qbuf_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res = 0, buf_type, num = -1; /* compiler borks here (?) */ + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dprintk(1, KERN_ERR + "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + res = -EINVAL; + goto dqbuf_unlock_and_return; + } + + num = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME]; + if (file->f_flags & O_NONBLOCK && + zr->v4l_buffers.buffer[num].state != BUZ_STATE_DONE) { + res = -EAGAIN; + goto dqbuf_unlock_and_return; + } + res = v4l_sync(fh, num); + if (res) + goto dqbuf_unlock_and_return; + zr->v4l_sync_tail++; + res = zoran_v4l2_buffer_status(fh, buf, num); + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + { + struct zoran_sync bs; + + if (fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) + buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + else + buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + if (buf->type != buf_type) { + dprintk(1, KERN_ERR + "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + res = -EINVAL; + goto dqbuf_unlock_and_return; + } + + num = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME]; + + if (file->f_flags & O_NONBLOCK && + zr->jpg_buffers.buffer[num].state != BUZ_STATE_DONE) { + res = -EAGAIN; + goto dqbuf_unlock_and_return; + } + bs.frame = 0; /* suppress compiler warning */ + res = jpg_sync(fh, &bs); + if (res) + goto dqbuf_unlock_and_return; + res = zoran_v4l2_buffer_status(fh, buf, bs.frame); + break; + } + + default: + dprintk(1, KERN_ERR + "%s: VIDIOC_DQBUF - unsupported type %d\n", + ZR_DEVNAME(zr), buf->type); + res = -EINVAL; + break; + } +dqbuf_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_streamon(struct file *file, void *__fh, enum v4l2_buf_type type) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res = 0; + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: /* raw capture */ + if (zr->v4l_buffers.active != ZORAN_ACTIVE || + fh->buffers.active != ZORAN_ACTIVE) { + res = -EBUSY; + goto strmon_unlock_and_return; + } + + zr->v4l_buffers.active = fh->buffers.active = ZORAN_LOCKED; + zr->v4l_settings = fh->v4l_settings; + + zr->v4l_sync_tail = zr->v4l_pend_tail; + if (!zr->v4l_memgrab_active && + zr->v4l_pend_head != zr->v4l_pend_tail) { + zr36057_set_memgrab(zr, 1); + } + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + /* what is the codec mode right now? */ + if (zr->jpg_buffers.active != ZORAN_ACTIVE || + fh->buffers.active != ZORAN_ACTIVE) { + res = -EBUSY; + goto strmon_unlock_and_return; + } + + zr->jpg_buffers.active = fh->buffers.active = ZORAN_LOCKED; + + if (zr->jpg_que_head != zr->jpg_que_tail) { + /* Start the jpeg codec when the first frame is queued */ + jpeg_start(zr); + } + break; + + default: + dprintk(1, + KERN_ERR + "%s: VIDIOC_STREAMON - invalid map mode %d\n", + ZR_DEVNAME(zr), fh->map_mode); + res = -EINVAL; + break; + } +strmon_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int i, res = 0; + unsigned long flags; + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: /* raw capture */ + if (fh->buffers.active == ZORAN_FREE && + zr->v4l_buffers.active != ZORAN_FREE) { + res = -EPERM; /* stay off other's settings! */ + goto strmoff_unlock_and_return; + } + if (zr->v4l_buffers.active == ZORAN_FREE) + goto strmoff_unlock_and_return; + + spin_lock_irqsave(&zr->spinlock, flags); + /* unload capture */ + if (zr->v4l_memgrab_active) { + + zr36057_set_memgrab(zr, 0); + } + + for (i = 0; i < fh->buffers.num_buffers; i++) + zr->v4l_buffers.buffer[i].state = BUZ_STATE_USER; + fh->buffers = zr->v4l_buffers; + + zr->v4l_buffers.active = fh->buffers.active = ZORAN_FREE; + + zr->v4l_grab_seq = 0; + zr->v4l_pend_head = zr->v4l_pend_tail = 0; + zr->v4l_sync_tail = 0; + + spin_unlock_irqrestore(&zr->spinlock, flags); + + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + if (fh->buffers.active == ZORAN_FREE && + zr->jpg_buffers.active != ZORAN_FREE) { + res = -EPERM; /* stay off other's settings! */ + goto strmoff_unlock_and_return; + } + if (zr->jpg_buffers.active == ZORAN_FREE) + goto strmoff_unlock_and_return; + + res = jpg_qbuf(fh, -1, + (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) ? + BUZ_MODE_MOTION_COMPRESS : + BUZ_MODE_MOTION_DECOMPRESS); + if (res) + goto strmoff_unlock_and_return; + break; + default: + dprintk(1, KERN_ERR + "%s: VIDIOC_STREAMOFF - invalid map mode %d\n", + ZR_DEVNAME(zr), fh->map_mode); + res = -EINVAL; + break; + } +strmoff_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_queryctrl(struct file *file, void *__fh, + struct v4l2_queryctrl *ctrl) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + /* we only support hue/saturation/contrast/brightness */ + if (ctrl->id < V4L2_CID_BRIGHTNESS || + ctrl->id > V4L2_CID_HUE) + return -EINVAL; + + decoder_call(zr, core, queryctrl, ctrl); + + return 0; +} + +static int zoran_g_ctrl(struct file *file, void *__fh, struct v4l2_control *ctrl) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + /* we only support hue/saturation/contrast/brightness */ + if (ctrl->id < V4L2_CID_BRIGHTNESS || + ctrl->id > V4L2_CID_HUE) + return -EINVAL; + + mutex_lock(&zr->resource_lock); + decoder_call(zr, core, g_ctrl, ctrl); + mutex_unlock(&zr->resource_lock); + + return 0; +} + +static int zoran_s_ctrl(struct file *file, void *__fh, struct v4l2_control *ctrl) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + /* we only support hue/saturation/contrast/brightness */ + if (ctrl->id < V4L2_CID_BRIGHTNESS || + ctrl->id > V4L2_CID_HUE) + return -EINVAL; + + mutex_lock(&zr->resource_lock); + decoder_call(zr, core, s_ctrl, ctrl); + mutex_unlock(&zr->resource_lock); + + return 0; +} + +static int zoran_g_std(struct file *file, void *__fh, v4l2_std_id *std) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + mutex_lock(&zr->resource_lock); + *std = zr->norm; + mutex_unlock(&zr->resource_lock); + return 0; +} + +static int zoran_s_std(struct file *file, void *__fh, v4l2_std_id std) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res = 0; + + mutex_lock(&zr->resource_lock); + res = zoran_set_norm(zr, std); + if (res) + goto sstd_unlock_and_return; + + res = wait_grab_pending(zr); +sstd_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; +} + +static int zoran_enum_input(struct file *file, void *__fh, + struct v4l2_input *inp) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + if (inp->index >= zr->card.inputs) + return -EINVAL; + + strncpy(inp->name, zr->card.input[inp->index].name, + sizeof(inp->name) - 1); + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = V4L2_STD_ALL; + + /* Get status of video decoder */ + mutex_lock(&zr->resource_lock); + decoder_call(zr, video, g_input_status, &inp->status); + mutex_unlock(&zr->resource_lock); + return 0; +} + +static int zoran_g_input(struct file *file, void *__fh, unsigned int *input) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + + mutex_lock(&zr->resource_lock); + *input = zr->input; + mutex_unlock(&zr->resource_lock); + + return 0; +} + +static int zoran_s_input(struct file *file, void *__fh, unsigned int input) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res; + + mutex_lock(&zr->resource_lock); + res = zoran_set_input(zr, input); + if (res) + goto sinput_unlock_and_return; + + /* Make sure the changes come into effect */ + res = wait_grab_pending(zr); +sinput_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; +} + +static int zoran_enum_output(struct file *file, void *__fh, + struct v4l2_output *outp) +{ + if (outp->index != 0) + return -EINVAL; + + outp->index = 0; + outp->type = V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY; + strncpy(outp->name, "Autodetect", sizeof(outp->name)-1); + + return 0; +} + +static int zoran_g_output(struct file *file, void *__fh, unsigned int *output) +{ + *output = 0; + + return 0; +} + +static int zoran_s_output(struct file *file, void *__fh, unsigned int output) +{ + if (output != 0) + return -EINVAL; + + return 0; +} + +/* cropping (sub-frame capture) */ +static int zoran_cropcap(struct file *file, void *__fh, + struct v4l2_cropcap *cropcap) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int type = cropcap->type, res = 0; + + memset(cropcap, 0, sizeof(*cropcap)); + cropcap->type = type; + + mutex_lock(&zr->resource_lock); + + if (cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && + (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fh->map_mode == ZORAN_MAP_MODE_RAW)) { + dprintk(1, KERN_ERR + "%s: VIDIOC_CROPCAP - subcapture only supported for compressed capture\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto cropcap_unlock_and_return; + } + + cropcap->bounds.top = cropcap->bounds.left = 0; + cropcap->bounds.width = BUZ_MAX_WIDTH; + cropcap->bounds.height = BUZ_MAX_HEIGHT; + cropcap->defrect.top = cropcap->defrect.left = 0; + cropcap->defrect.width = BUZ_MIN_WIDTH; + cropcap->defrect.height = BUZ_MIN_HEIGHT; +cropcap_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; +} + +static int zoran_g_crop(struct file *file, void *__fh, struct v4l2_crop *crop) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int type = crop->type, res = 0; + + memset(crop, 0, sizeof(*crop)); + crop->type = type; + + mutex_lock(&zr->resource_lock); + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && + (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fh->map_mode == ZORAN_MAP_MODE_RAW)) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_G_CROP - subcapture only supported for compressed capture\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto gcrop_unlock_and_return; + } + + crop->c.top = fh->jpg_settings.img_y; + crop->c.left = fh->jpg_settings.img_x; + crop->c.width = fh->jpg_settings.img_width; + crop->c.height = fh->jpg_settings.img_height; + +gcrop_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int zoran_s_crop(struct file *file, void *__fh, const struct v4l2_crop *crop) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res = 0; + struct zoran_jpg_settings settings; + + settings = fh->jpg_settings; + + mutex_lock(&zr->resource_lock); + + if (fh->buffers.allocated) { + dprintk(1, KERN_ERR + "%s: VIDIOC_S_CROP - cannot change settings while active\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto scrop_unlock_and_return; + } + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && + (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fh->map_mode == ZORAN_MAP_MODE_RAW)) { + dprintk(1, KERN_ERR + "%s: VIDIOC_G_CROP - subcapture only supported for compressed capture\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto scrop_unlock_and_return; + } + + /* move into a form that we understand */ + settings.img_x = crop->c.left; + settings.img_y = crop->c.top; + settings.img_width = crop->c.width; + settings.img_height = crop->c.height; + + /* check validity */ + res = zoran_check_jpg_settings(zr, &settings, 0); + if (res) + goto scrop_unlock_and_return; + + /* accept */ + fh->jpg_settings = settings; + +scrop_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; +} + +static int zoran_g_jpegcomp(struct file *file, void *__fh, + struct v4l2_jpegcompression *params) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + memset(params, 0, sizeof(*params)); + + mutex_lock(&zr->resource_lock); + + params->quality = fh->jpg_settings.jpg_comp.quality; + params->APPn = fh->jpg_settings.jpg_comp.APPn; + memcpy(params->APP_data, + fh->jpg_settings.jpg_comp.APP_data, + fh->jpg_settings.jpg_comp.APP_len); + params->APP_len = fh->jpg_settings.jpg_comp.APP_len; + memcpy(params->COM_data, + fh->jpg_settings.jpg_comp.COM_data, + fh->jpg_settings.jpg_comp.COM_len); + params->COM_len = fh->jpg_settings.jpg_comp.COM_len; + params->jpeg_markers = + fh->jpg_settings.jpg_comp.jpeg_markers; + + mutex_unlock(&zr->resource_lock); + + return 0; +} + +static int zoran_s_jpegcomp(struct file *file, void *__fh, + const struct v4l2_jpegcompression *params) +{ + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + int res = 0; + struct zoran_jpg_settings settings; + + settings = fh->jpg_settings; + + settings.jpg_comp = *params; + + mutex_lock(&zr->resource_lock); + + if (fh->buffers.active != ZORAN_FREE) { + dprintk(1, KERN_WARNING + "%s: VIDIOC_S_JPEGCOMP called while in playback/capture mode\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto sjpegc_unlock_and_return; + } + + res = zoran_check_jpg_settings(zr, &settings, 0); + if (res) + goto sjpegc_unlock_and_return; + if (!fh->buffers.allocated) + fh->buffers.buffer_size = + zoran_v4l2_calc_bufsize(&fh->jpg_settings); + fh->jpg_settings.jpg_comp = settings.jpg_comp; +sjpegc_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static unsigned int +zoran_poll (struct file *file, + poll_table *wait) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int res = 0, frame; + unsigned long flags; + + /* we should check whether buffers are ready to be synced on + * (w/o waits - O_NONBLOCK) here + * if ready for read (sync), return POLLIN|POLLRDNORM, + * if ready for write (sync), return POLLOUT|POLLWRNORM, + * if error, return POLLERR, + * if no buffers queued or so, return POLLNVAL + */ + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: + poll_wait(file, &zr->v4l_capq, wait); + frame = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME]; + + spin_lock_irqsave(&zr->spinlock, flags); + dprintk(3, + KERN_DEBUG + "%s: %s() raw - active=%c, sync_tail=%lu/%c, pend_tail=%lu, pend_head=%lu\n", + ZR_DEVNAME(zr), __func__, + "FAL"[fh->buffers.active], zr->v4l_sync_tail, + "UPMD"[zr->v4l_buffers.buffer[frame].state], + zr->v4l_pend_tail, zr->v4l_pend_head); + /* Process is the one capturing? */ + if (fh->buffers.active != ZORAN_FREE && + /* Buffer ready to DQBUF? */ + zr->v4l_buffers.buffer[frame].state == BUZ_STATE_DONE) + res = POLLIN | POLLRDNORM; + spin_unlock_irqrestore(&zr->spinlock, flags); + + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + poll_wait(file, &zr->jpg_capq, wait); + frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME]; + + spin_lock_irqsave(&zr->spinlock, flags); + dprintk(3, + KERN_DEBUG + "%s: %s() jpg - active=%c, que_tail=%lu/%c, que_head=%lu, dma=%lu/%lu\n", + ZR_DEVNAME(zr), __func__, + "FAL"[fh->buffers.active], zr->jpg_que_tail, + "UPMD"[zr->jpg_buffers.buffer[frame].state], + zr->jpg_que_head, zr->jpg_dma_tail, zr->jpg_dma_head); + if (fh->buffers.active != ZORAN_FREE && + zr->jpg_buffers.buffer[frame].state == BUZ_STATE_DONE) { + if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) + res = POLLIN | POLLRDNORM; + else + res = POLLOUT | POLLWRNORM; + } + spin_unlock_irqrestore(&zr->spinlock, flags); + + break; + + default: + dprintk(1, + KERN_ERR + "%s: %s - internal error, unknown map_mode=%d\n", + ZR_DEVNAME(zr), __func__, fh->map_mode); + res = POLLNVAL; + } + + mutex_unlock(&zr->resource_lock); + + return res; +} + + +/* + * This maps the buffers to user space. + * + * Depending on the state of fh->map_mode + * the V4L or the MJPEG buffers are mapped + * per buffer or all together + * + * Note that we need to connect to some + * unmap signal event to unmap the de-allocate + * the buffer accordingly (zoran_vm_close()) + */ + +static void +zoran_vm_open (struct vm_area_struct *vma) +{ + struct zoran_mapping *map = vma->vm_private_data; + atomic_inc(&map->count); +} + +static void +zoran_vm_close (struct vm_area_struct *vma) +{ + struct zoran_mapping *map = vma->vm_private_data; + struct zoran_fh *fh = map->fh; + struct zoran *zr = fh->zr; + int i; + + if (!atomic_dec_and_mutex_lock(&map->count, &zr->resource_lock)) + return; + + dprintk(3, KERN_INFO "%s: %s - munmap(%s)\n", ZR_DEVNAME(zr), + __func__, mode_name(fh->map_mode)); + + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (fh->buffers.buffer[i].map == map) + fh->buffers.buffer[i].map = NULL; + } + kfree(map); + + /* Any buffers still mapped? */ + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (fh->buffers.buffer[i].map) { + mutex_unlock(&zr->resource_lock); + return; + } + } + + dprintk(3, KERN_INFO "%s: %s - free %s buffers\n", ZR_DEVNAME(zr), + __func__, mode_name(fh->map_mode)); + + + if (fh->map_mode == ZORAN_MAP_MODE_RAW) { + if (fh->buffers.active != ZORAN_FREE) { + unsigned long flags; + + spin_lock_irqsave(&zr->spinlock, flags); + zr36057_set_memgrab(zr, 0); + zr->v4l_buffers.allocated = 0; + zr->v4l_buffers.active = fh->buffers.active = ZORAN_FREE; + spin_unlock_irqrestore(&zr->spinlock, flags); + } + v4l_fbuffer_free(fh); + } else { + if (fh->buffers.active != ZORAN_FREE) { + jpg_qbuf(fh, -1, zr->codec_mode); + zr->jpg_buffers.allocated = 0; + zr->jpg_buffers.active = fh->buffers.active = ZORAN_FREE; + } + jpg_fbuffer_free(fh); + } + + mutex_unlock(&zr->resource_lock); +} + +static const struct vm_operations_struct zoran_vm_ops = { + .open = zoran_vm_open, + .close = zoran_vm_close, +}; + +static int +zoran_mmap (struct file *file, + struct vm_area_struct *vma) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + unsigned long size = (vma->vm_end - vma->vm_start); + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + int i, j; + unsigned long page, start = vma->vm_start, todo, pos, fraglen; + int first, last; + struct zoran_mapping *map; + int res = 0; + + dprintk(3, + KERN_INFO "%s: %s(%s) of 0x%08lx-0x%08lx (size=%lu)\n", + ZR_DEVNAME(zr), __func__, + mode_name(fh->map_mode), vma->vm_start, vma->vm_end, size); + + if (!(vma->vm_flags & VM_SHARED) || !(vma->vm_flags & VM_READ) || + !(vma->vm_flags & VM_WRITE)) { + dprintk(1, + KERN_ERR + "%s: %s - no MAP_SHARED/PROT_{READ,WRITE} given\n", + ZR_DEVNAME(zr), __func__); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + + if (!fh->buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: %s(%s) - buffers not yet allocated\n", + ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode)); + res = -ENOMEM; + goto mmap_unlock_and_return; + } + + first = offset / fh->buffers.buffer_size; + last = first - 1 + size / fh->buffers.buffer_size; + if (offset % fh->buffers.buffer_size != 0 || + size % fh->buffers.buffer_size != 0 || first < 0 || + last < 0 || first >= fh->buffers.num_buffers || + last >= fh->buffers.buffer_size) { + dprintk(1, + KERN_ERR + "%s: %s(%s) - offset=%lu or size=%lu invalid for bufsize=%d and numbufs=%d\n", + ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode), offset, size, + fh->buffers.buffer_size, + fh->buffers.num_buffers); + res = -EINVAL; + goto mmap_unlock_and_return; + } + + /* Check if any buffers are already mapped */ + for (i = first; i <= last; i++) { + if (fh->buffers.buffer[i].map) { + dprintk(1, + KERN_ERR + "%s: %s(%s) - buffer %d already mapped\n", + ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode), i); + res = -EBUSY; + goto mmap_unlock_and_return; + } + } + + /* map these buffers */ + map = kmalloc(sizeof(struct zoran_mapping), GFP_KERNEL); + if (!map) { + res = -ENOMEM; + goto mmap_unlock_and_return; + } + map->fh = fh; + atomic_set(&map->count, 1); + + vma->vm_ops = &zoran_vm_ops; + vma->vm_flags |= VM_DONTEXPAND; + vma->vm_private_data = map; + + if (fh->map_mode == ZORAN_MAP_MODE_RAW) { + for (i = first; i <= last; i++) { + todo = size; + if (todo > fh->buffers.buffer_size) + todo = fh->buffers.buffer_size; + page = fh->buffers.buffer[i].v4l.fbuffer_phys; + if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, + todo, PAGE_SHARED)) { + dprintk(1, + KERN_ERR + "%s: %s(V4L) - remap_pfn_range failed\n", + ZR_DEVNAME(zr), __func__); + res = -EAGAIN; + goto mmap_unlock_and_return; + } + size -= todo; + start += todo; + fh->buffers.buffer[i].map = map; + if (size == 0) + break; + } + } else { + for (i = first; i <= last; i++) { + for (j = 0; + j < fh->buffers.buffer_size / PAGE_SIZE; + j++) { + fraglen = + (le32_to_cpu(fh->buffers.buffer[i].jpg. + frag_tab[2 * j + 1]) & ~1) << 1; + todo = size; + if (todo > fraglen) + todo = fraglen; + pos = + le32_to_cpu(fh->buffers. + buffer[i].jpg.frag_tab[2 * j]); + /* should just be pos on i386 */ + page = virt_to_phys(bus_to_virt(pos)) + >> PAGE_SHIFT; + if (remap_pfn_range(vma, start, page, + todo, PAGE_SHARED)) { + dprintk(1, + KERN_ERR + "%s: %s(V4L) - remap_pfn_range failed\n", + ZR_DEVNAME(zr), __func__); + res = -EAGAIN; + goto mmap_unlock_and_return; + } + size -= todo; + start += todo; + if (size == 0) + break; + if (le32_to_cpu(fh->buffers.buffer[i].jpg. + frag_tab[2 * j + 1]) & 1) + break; /* was last fragment */ + } + fh->buffers.buffer[i].map = map; + if (size == 0) + break; + + } + } + +mmap_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static const struct v4l2_ioctl_ops zoran_ioctl_ops = { + .vidioc_querycap = zoran_querycap, + .vidioc_cropcap = zoran_cropcap, + .vidioc_s_crop = zoran_s_crop, + .vidioc_g_crop = zoran_g_crop, + .vidioc_enum_input = zoran_enum_input, + .vidioc_g_input = zoran_g_input, + .vidioc_s_input = zoran_s_input, + .vidioc_enum_output = zoran_enum_output, + .vidioc_g_output = zoran_g_output, + .vidioc_s_output = zoran_s_output, + .vidioc_g_fbuf = zoran_g_fbuf, + .vidioc_s_fbuf = zoran_s_fbuf, + .vidioc_g_std = zoran_g_std, + .vidioc_s_std = zoran_s_std, + .vidioc_g_jpegcomp = zoran_g_jpegcomp, + .vidioc_s_jpegcomp = zoran_s_jpegcomp, + .vidioc_overlay = zoran_overlay, + .vidioc_reqbufs = zoran_reqbufs, + .vidioc_querybuf = zoran_querybuf, + .vidioc_qbuf = zoran_qbuf, + .vidioc_dqbuf = zoran_dqbuf, + .vidioc_streamon = zoran_streamon, + .vidioc_streamoff = zoran_streamoff, + .vidioc_enum_fmt_vid_cap = zoran_enum_fmt_vid_cap, + .vidioc_enum_fmt_vid_out = zoran_enum_fmt_vid_out, + .vidioc_enum_fmt_vid_overlay = zoran_enum_fmt_vid_overlay, + .vidioc_g_fmt_vid_cap = zoran_g_fmt_vid_cap, + .vidioc_g_fmt_vid_out = zoran_g_fmt_vid_out, + .vidioc_g_fmt_vid_overlay = zoran_g_fmt_vid_overlay, + .vidioc_s_fmt_vid_cap = zoran_s_fmt_vid_cap, + .vidioc_s_fmt_vid_out = zoran_s_fmt_vid_out, + .vidioc_s_fmt_vid_overlay = zoran_s_fmt_vid_overlay, + .vidioc_try_fmt_vid_cap = zoran_try_fmt_vid_cap, + .vidioc_try_fmt_vid_out = zoran_try_fmt_vid_out, + .vidioc_try_fmt_vid_overlay = zoran_try_fmt_vid_overlay, + .vidioc_queryctrl = zoran_queryctrl, + .vidioc_s_ctrl = zoran_s_ctrl, + .vidioc_g_ctrl = zoran_g_ctrl, +}; + +/* please use zr->resource_lock consistently and kill this wrapper */ +static long zoran_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int ret; + + mutex_lock(&zr->other_lock); + ret = video_ioctl2(file, cmd, arg); + mutex_unlock(&zr->other_lock); + + return ret; +} + +static const struct v4l2_file_operations zoran_fops = { + .owner = THIS_MODULE, + .open = zoran_open, + .release = zoran_close, + .unlocked_ioctl = zoran_ioctl, + .read = zoran_read, + .write = zoran_write, + .mmap = zoran_mmap, + .poll = zoran_poll, +}; + +struct video_device zoran_template = { + .name = ZORAN_NAME, + .fops = &zoran_fops, + .ioctl_ops = &zoran_ioctl_ops, + .release = &zoran_vdev_release, + .tvnorms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM, +}; + diff --git a/drivers/media/pci/zoran/zoran_procfs.c b/drivers/media/pci/zoran/zoran_procfs.c new file mode 100644 index 00000000..f7ceee0c --- /dev/null +++ b/drivers/media/pci/zoran/zoran_procfs.c @@ -0,0 +1,225 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles the procFS entries (/proc/ZORAN[%d]) + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "videocodec.h" +#include "zoran.h" +#include "zoran_procfs.h" +#include "zoran_card.h" + +#ifdef CONFIG_PROC_FS +struct procfs_params_zr36067 { + char *name; + short reg; + u32 mask; + short bit; +}; + +static const struct procfs_params_zr36067 zr67[] = { + {"HSPol", 0x000, 1, 30}, + {"HStart", 0x000, 0x3ff, 10}, + {"HEnd", 0x000, 0x3ff, 0}, + + {"VSPol", 0x004, 1, 30}, + {"VStart", 0x004, 0x3ff, 10}, + {"VEnd", 0x004, 0x3ff, 0}, + + {"ExtFl", 0x008, 1, 26}, + {"TopField", 0x008, 1, 25}, + {"VCLKPol", 0x008, 1, 24}, + {"DupFld", 0x008, 1, 20}, + {"LittleEndian", 0x008, 1, 0}, + + {"HsyncStart", 0x10c, 0xffff, 16}, + {"LineTot", 0x10c, 0xffff, 0}, + + {"NAX", 0x110, 0xffff, 16}, + {"PAX", 0x110, 0xffff, 0}, + + {"NAY", 0x114, 0xffff, 16}, + {"PAY", 0x114, 0xffff, 0}, + + /* {"",,,}, */ + + {NULL, 0, 0, 0}, +}; + +static void +setparam (struct zoran *zr, + char *name, + char *sval) +{ + int i = 0, reg0, reg, val; + + while (zr67[i].name != NULL) { + if (!strncmp(name, zr67[i].name, strlen(zr67[i].name))) { + reg = reg0 = btread(zr67[i].reg); + reg &= ~(zr67[i].mask << zr67[i].bit); + if (!isdigit(sval[0])) + break; + val = simple_strtoul(sval, NULL, 0); + if ((val & ~zr67[i].mask)) + break; + reg |= (val & zr67[i].mask) << zr67[i].bit; + dprintk(4, + KERN_INFO + "%s: setparam: setting ZR36067 register 0x%03x: 0x%08x=>0x%08x %s=%d\n", + ZR_DEVNAME(zr), zr67[i].reg, reg0, reg, + zr67[i].name, val); + btwrite(reg, zr67[i].reg); + break; + } + i++; + } +} + +static int zoran_show(struct seq_file *p, void *v) +{ + struct zoran *zr = p->private; + int i; + + seq_printf(p, "ZR36067 registers:\n"); + for (i = 0; i < 0x130; i += 16) + seq_printf(p, "%03X %08X %08X %08X %08X \n", i, + btread(i), btread(i+4), btread(i+8), btread(i+12)); + return 0; +} + +static int zoran_open(struct inode *inode, struct file *file) +{ + struct zoran *data = PDE_DATA(inode); + return single_open(file, zoran_show, data); +} + +static ssize_t zoran_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + struct zoran *zr = PDE_DATA(file_inode(file)); + char *string, *sp; + char *line, *ldelim, *varname, *svar, *tdelim; + + if (count > 32768) /* Stupidity filter */ + return -EINVAL; + + string = sp = vmalloc(count + 1); + if (!string) { + dprintk(1, + KERN_ERR + "%s: write_proc: can not allocate memory\n", + ZR_DEVNAME(zr)); + return -ENOMEM; + } + if (copy_from_user(string, buffer, count)) { + vfree (string); + return -EFAULT; + } + string[count] = 0; + dprintk(4, KERN_INFO "%s: write_proc: name=%s count=%zu zr=%p\n", + ZR_DEVNAME(zr), file->f_path.dentry->d_name.name, count, zr); + ldelim = " \t\n"; + tdelim = "="; + line = strpbrk(sp, ldelim); + while (line) { + *line = 0; + svar = strpbrk(sp, tdelim); + if (svar) { + *svar = 0; + varname = sp; + svar++; + setparam(zr, varname, svar); + } + sp = line + 1; + line = strpbrk(sp, ldelim); + } + vfree(string); + + return count; +} + +static const struct file_operations zoran_operations = { + .owner = THIS_MODULE, + .open = zoran_open, + .read = seq_read, + .write = zoran_write, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +int +zoran_proc_init (struct zoran *zr) +{ +#ifdef CONFIG_PROC_FS + char name[8]; + + snprintf(name, 7, "zoran%d", zr->id); + zr->zoran_proc = proc_create_data(name, 0, NULL, &zoran_operations, zr); + if (zr->zoran_proc != NULL) { + dprintk(2, + KERN_INFO + "%s: procfs entry /proc/%s allocated. data=%p\n", + ZR_DEVNAME(zr), name, zr); + } else { + dprintk(1, KERN_ERR "%s: Unable to initialise /proc/%s\n", + ZR_DEVNAME(zr), name); + return 1; + } +#endif + return 0; +} + +void +zoran_proc_cleanup (struct zoran *zr) +{ +#ifdef CONFIG_PROC_FS + char name[8]; + + snprintf(name, 7, "zoran%d", zr->id); + if (zr->zoran_proc) + remove_proc_entry(name, NULL); + zr->zoran_proc = NULL; +#endif +} diff --git a/drivers/media/pci/zoran/zoran_procfs.h b/drivers/media/pci/zoran/zoran_procfs.h new file mode 100644 index 00000000..f2d5b1ba --- /dev/null +++ b/drivers/media/pci/zoran/zoran_procfs.h @@ -0,0 +1,36 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles card-specific data and detection + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ZORAN_PROCFS_H__ +#define __ZORAN_PROCFS_H__ + +extern int zoran_proc_init(struct zoran *zr); +extern void zoran_proc_cleanup(struct zoran *zr); + +#endif /* __ZORAN_PROCFS_H__ */ diff --git a/drivers/media/pci/zoran/zr36016.c b/drivers/media/pci/zoran/zr36016.c new file mode 100644 index 00000000..b87ddba8 --- /dev/null +++ b/drivers/media/pci/zoran/zr36016.c @@ -0,0 +1,524 @@ +/* + * Zoran ZR36016 basic configuration functions + * + * Copyright (C) 2001 Wolfgang Scherr + * + * $Id: zr36016.c,v 1.1.2.14 2003/08/20 19:46:55 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define ZR016_VERSION "v0.7" + +#include +#include +#include +#include + +#include +#include + +/* I/O commands, error codes */ +#include + +/* v4l API */ + +/* headerfile of this module */ +#include "zr36016.h" + +/* codec io API */ +#include "videocodec.h" + +/* it doesn't make sense to have more than 20 or so, + just to prevent some unwanted loops */ +#define MAX_CODECS 20 + +/* amount of chips attached via this driver */ +static int zr36016_codecs; + +/* debugging is available via module parameter */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* ========================================================================= + Local hardware I/O functions: + + read/write via codec layer (registers are located in the master device) + ========================================================================= */ + +/* read and write functions */ +static u8 +zr36016_read (struct zr36016 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if (ptr->codec->master_data->readreg) + value = + (ptr->codec->master_data-> + readreg(ptr->codec, reg)) & 0xFF; + else + dprintk(1, + KERN_ERR "%s: invalid I/O setup, nothing read!\n", + ptr->name); + + dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, + value); + + return value; +} + +static void +zr36016_write (struct zr36016 *ptr, + u16 reg, + u8 value) +{ + dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, + reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) { + ptr->codec->master_data->writereg(ptr->codec, reg, value); + } else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written!\n", + ptr->name); +} + +/* indirect read and write functions */ +/* the 016 supports auto-addr-increment, but + * writing it all time cost not much and is safer... */ +static u8 +zr36016_readi (struct zr36016 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if ((ptr->codec->master_data->writereg) && + (ptr->codec->master_data->readreg)) { + ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR + value = (ptr->codec->master_data->readreg(ptr->codec, ZR016_IDATA)) & 0xFF; // DATA + } else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing read (i)!\n", + ptr->name); + + dprintk(4, "%s: reading indirect from 0x%04x: %02x\n", ptr->name, + reg, value); + return value; +} + +static void +zr36016_writei (struct zr36016 *ptr, + u16 reg, + u8 value) +{ + dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name, + value, reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) { + ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR + ptr->codec->master_data->writereg(ptr->codec, ZR016_IDATA, value & 0x0FF); // DATA + } else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written (i)!\n", + ptr->name); +} + +/* ========================================================================= + Local helper function: + + version read + ========================================================================= */ + +/* version kept in datastructure */ +static u8 +zr36016_read_version (struct zr36016 *ptr) +{ + ptr->version = zr36016_read(ptr, 0) >> 4; + return ptr->version; +} + +/* ========================================================================= + Local helper function: + + basic test of "connectivity", writes/reads to/from PAX-Lo register + ========================================================================= */ + +static int +zr36016_basic_test (struct zr36016 *ptr) +{ + if (debug) { + int i; + zr36016_writei(ptr, ZR016I_PAX_LO, 0x55); + dprintk(1, KERN_INFO "%s: registers: ", ptr->name); + for (i = 0; i <= 0x0b; i++) + dprintk(1, "%02x ", zr36016_readi(ptr, i)); + dprintk(1, "\n"); + } + // for testing just write 0, then the default value to a register and read + // it back in both cases + zr36016_writei(ptr, ZR016I_PAX_LO, 0x00); + if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to vfe processor!\n", + ptr->name); + return -ENXIO; + } + zr36016_writei(ptr, ZR016I_PAX_LO, 0x0d0); + if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0d0) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to vfe processor!\n", + ptr->name); + return -ENXIO; + } + // we allow version numbers from 0-3, should be enough, though + zr36016_read_version(ptr); + if (ptr->version & 0x0c) { + dprintk(1, + KERN_ERR + "%s: attach failed, suspicious version %d found...\n", + ptr->name, ptr->version); + return -ENXIO; + } + + return 0; /* looks good! */ +} + +/* ========================================================================= + Local helper function: + + simple loop for pushing the init datasets - NO USE -- + ========================================================================= */ + +#if 0 +static int zr36016_pushit (struct zr36016 *ptr, + u16 startreg, + u16 len, + const char *data) +{ + int i=0; + + dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", + ptr->name, startreg,len); + while (imode == CODEC_DO_COMPRESSION ? + ZR016_COMPRESSION : ZR016_EXPANSION)); + + // misc setup + zr36016_writei(ptr, ZR016I_SETUP1, + (ptr->xdec ? (ZR016_HRFL | ZR016_HORZ) : 0) | + (ptr->ydec ? ZR016_VERT : 0) | ZR016_CNTI); + zr36016_writei(ptr, ZR016I_SETUP2, ZR016_CCIR); + + // Window setup + // (no extra offset for now, norm defines offset, default width height) + zr36016_writei(ptr, ZR016I_PAX_HI, ptr->width >> 8); + zr36016_writei(ptr, ZR016I_PAX_LO, ptr->width & 0xFF); + zr36016_writei(ptr, ZR016I_PAY_HI, ptr->height >> 8); + zr36016_writei(ptr, ZR016I_PAY_LO, ptr->height & 0xFF); + zr36016_writei(ptr, ZR016I_NAX_HI, ptr->xoff >> 8); + zr36016_writei(ptr, ZR016I_NAX_LO, ptr->xoff & 0xFF); + zr36016_writei(ptr, ZR016I_NAY_HI, ptr->yoff >> 8); + zr36016_writei(ptr, ZR016I_NAY_LO, ptr->yoff & 0xFF); + + /* shall we continue now, please? */ + zr36016_write(ptr, ZR016_GOSTOP, 1); +} + +/* ========================================================================= + CODEC API FUNCTIONS + + this functions are accessed by the master via the API structure + ========================================================================= */ + +/* set compression/expansion mode and launches codec - + this should be the last call from the master before starting processing */ +static int +zr36016_set_mode (struct videocodec *codec, + int mode) +{ + struct zr36016 *ptr = (struct zr36016 *) codec->data; + + dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); + + if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) + return -EINVAL; + + ptr->mode = mode; + zr36016_init(ptr); + + return 0; +} + +/* set picture size */ +static int +zr36016_set_video (struct videocodec *codec, + struct tvnorm *norm, + struct vfe_settings *cap, + struct vfe_polarity *pol) +{ + struct zr36016 *ptr = (struct zr36016 *) codec->data; + + dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) call\n", + ptr->name, norm->HStart, norm->VStart, + cap->x, cap->y, cap->width, cap->height, + cap->decimation); + + /* if () return -EINVAL; + * trust the master driver that it knows what it does - so + * we allow invalid startx/y for now ... */ + ptr->width = cap->width; + ptr->height = cap->height; + /* (Ronald) This is ugly. zoran_device.c, line 387 + * already mentions what happens if HStart is even + * (blue faces, etc., cr/cb inversed). There's probably + * some good reason why HStart is 0 instead of 1, so I'm + * leaving it to this for now, but really... This can be + * done a lot simpler */ + ptr->xoff = (norm->HStart ? norm->HStart : 1) + cap->x; + /* Something to note here (I don't understand it), setting + * VStart too high will cause the codec to 'not work'. I + * really don't get it. values of 16 (VStart) already break + * it here. Just '0' seems to work. More testing needed! */ + ptr->yoff = norm->VStart + cap->y; + /* (Ronald) dzjeeh, can't this thing do hor_decimation = 4? */ + ptr->xdec = ((cap->decimation & 0xff) == 1) ? 0 : 1; + ptr->ydec = (((cap->decimation >> 8) & 0xff) == 1) ? 0 : 1; + + return 0; +} + +/* additional control functions */ +static int +zr36016_control (struct videocodec *codec, + int type, + int size, + void *data) +{ + struct zr36016 *ptr = (struct zr36016 *) codec->data; + int *ival = (int *) data; + + dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, + size); + + switch (type) { + case CODEC_G_STATUS: /* get last status - we don't know it ... */ + if (size != sizeof(int)) + return -EFAULT; + *ival = 0; + break; + + case CODEC_G_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + *ival = 0; + break; + + case CODEC_S_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + if (*ival != 0) + return -EINVAL; + /* not needed, do nothing */ + return 0; + + case CODEC_G_VFE: + case CODEC_S_VFE: + return 0; + + case CODEC_S_MMAP: + /* not available, give an error */ + return -ENXIO; + + default: + return -EINVAL; + } + + return size; +} + +/* ========================================================================= + Exit and unregister function: + + Deinitializes Zoran's JPEG processor + ========================================================================= */ + +static int +zr36016_unset (struct videocodec *codec) +{ + struct zr36016 *ptr = codec->data; + + if (ptr) { + /* do wee need some codec deinit here, too ???? */ + + dprintk(1, "%s: finished codec #%d\n", ptr->name, + ptr->num); + kfree(ptr); + codec->data = NULL; + + zr36016_codecs--; + return 0; + } + + return -EFAULT; +} + +/* ========================================================================= + Setup and registry function: + + Initializes Zoran's JPEG processor + + Also sets pixel size, average code size, mode (compr./decompr.) + (the given size is determined by the processor with the video interface) + ========================================================================= */ + +static int +zr36016_setup (struct videocodec *codec) +{ + struct zr36016 *ptr; + int res; + + dprintk(2, "zr36016: initializing VFE subsystem #%d.\n", + zr36016_codecs); + + if (zr36016_codecs == MAX_CODECS) { + dprintk(1, + KERN_ERR "zr36016: Can't attach more codecs!\n"); + return -ENOSPC; + } + //mem structure init + codec->data = ptr = kzalloc(sizeof(struct zr36016), GFP_KERNEL); + if (NULL == ptr) { + dprintk(1, KERN_ERR "zr36016: Can't get enough memory!\n"); + return -ENOMEM; + } + + snprintf(ptr->name, sizeof(ptr->name), "zr36016[%d]", + zr36016_codecs); + ptr->num = zr36016_codecs++; + ptr->codec = codec; + + //testing + res = zr36016_basic_test(ptr); + if (res < 0) { + zr36016_unset(codec); + return res; + } + //final setup + ptr->mode = CODEC_DO_COMPRESSION; + ptr->width = 768; + ptr->height = 288; + ptr->xdec = 1; + ptr->ydec = 0; + zr36016_init(ptr); + + dprintk(1, KERN_INFO "%s: codec v%d attached and running\n", + ptr->name, ptr->version); + + return 0; +} + +static const struct videocodec zr36016_codec = { + .owner = THIS_MODULE, + .name = "zr36016", + .magic = 0L, // magic not used + .flags = + CODEC_FLAG_HARDWARE | CODEC_FLAG_VFE | CODEC_FLAG_ENCODER | + CODEC_FLAG_DECODER, + .type = CODEC_TYPE_ZR36016, + .setup = zr36016_setup, // functionality + .unset = zr36016_unset, + .set_mode = zr36016_set_mode, + .set_video = zr36016_set_video, + .control = zr36016_control, + // others are not used +}; + +/* ========================================================================= + HOOK IN DRIVER AS KERNEL MODULE + ========================================================================= */ + +static int __init +zr36016_init_module (void) +{ + //dprintk(1, "ZR36016 driver %s\n",ZR016_VERSION); + zr36016_codecs = 0; + return videocodec_register(&zr36016_codec); +} + +static void __exit +zr36016_cleanup_module (void) +{ + if (zr36016_codecs) { + dprintk(1, + "zr36016: something's wrong - %d codecs left somehow.\n", + zr36016_codecs); + } + videocodec_unregister(&zr36016_codec); +} + +module_init(zr36016_init_module); +module_exit(zr36016_cleanup_module); + +MODULE_AUTHOR("Wolfgang Scherr "); +MODULE_DESCRIPTION("Driver module for ZR36016 video frontends " + ZR016_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/zoran/zr36016.h b/drivers/media/pci/zoran/zr36016.h new file mode 100644 index 00000000..8c79229f --- /dev/null +++ b/drivers/media/pci/zoran/zr36016.h @@ -0,0 +1,111 @@ +/* + * Zoran ZR36016 basic configuration functions - header file + * + * Copyright (C) 2001 Wolfgang Scherr + * + * $Id: zr36016.h,v 1.1.2.3 2003/01/14 21:18:07 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#ifndef ZR36016_H +#define ZR36016_H + +/* data stored for each zoran jpeg codec chip */ +struct zr36016 { + char name[32]; + int num; + /* io datastructure */ + struct videocodec *codec; + // coder status + __u8 version; + // actual coder setup + int mode; + + __u16 xoff; + __u16 yoff; + __u16 width; + __u16 height; + __u16 xdec; + __u16 ydec; +}; + +/* direct register addresses */ +#define ZR016_GOSTOP 0x00 +#define ZR016_MODE 0x01 +#define ZR016_IADDR 0x02 +#define ZR016_IDATA 0x03 + +/* indirect register addresses */ +#define ZR016I_SETUP1 0x00 +#define ZR016I_SETUP2 0x01 +#define ZR016I_NAX_LO 0x02 +#define ZR016I_NAX_HI 0x03 +#define ZR016I_PAX_LO 0x04 +#define ZR016I_PAX_HI 0x05 +#define ZR016I_NAY_LO 0x06 +#define ZR016I_NAY_HI 0x07 +#define ZR016I_PAY_LO 0x08 +#define ZR016I_PAY_HI 0x09 +#define ZR016I_NOL_LO 0x0a +#define ZR016I_NOL_HI 0x0b + +/* possible values for mode register */ +#define ZR016_RGB444_YUV444 0x00 +#define ZR016_RGB444_YUV422 0x01 +#define ZR016_RGB444_YUV411 0x02 +#define ZR016_RGB444_Y400 0x03 +#define ZR016_RGB444_RGB444 0x04 +#define ZR016_YUV444_YUV444 0x08 +#define ZR016_YUV444_YUV422 0x09 +#define ZR016_YUV444_YUV411 0x0a +#define ZR016_YUV444_Y400 0x0b +#define ZR016_YUV444_RGB444 0x0c +#define ZR016_YUV422_YUV422 0x11 +#define ZR016_YUV422_YUV411 0x12 +#define ZR016_YUV422_Y400 0x13 +#define ZR016_YUV411_YUV411 0x16 +#define ZR016_YUV411_Y400 0x17 +#define ZR016_4444_4444 0x19 +#define ZR016_100_100 0x1b + +#define ZR016_RGB444 0x00 +#define ZR016_YUV444 0x20 +#define ZR016_YUV422 0x40 + +#define ZR016_COMPRESSION 0x80 +#define ZR016_EXPANSION 0x80 + +/* possible values for setup 1 register */ +#define ZR016_CKRT 0x80 +#define ZR016_VERT 0x40 +#define ZR016_HORZ 0x20 +#define ZR016_HRFL 0x10 +#define ZR016_DSFL 0x08 +#define ZR016_SBFL 0x04 +#define ZR016_RSTR 0x02 +#define ZR016_CNTI 0x01 + +/* possible values for setup 2 register */ +#define ZR016_SYEN 0x40 +#define ZR016_CCIR 0x04 +#define ZR016_SIGN 0x02 +#define ZR016_YMCS 0x01 + +#endif /*fndef ZR36016_H */ diff --git a/drivers/media/pci/zoran/zr36050.c b/drivers/media/pci/zoran/zr36050.c new file mode 100644 index 00000000..e1985609 --- /dev/null +++ b/drivers/media/pci/zoran/zr36050.c @@ -0,0 +1,900 @@ +/* + * Zoran ZR36050 basic configuration functions + * + * Copyright (C) 2001 Wolfgang Scherr + * + * $Id: zr36050.c,v 1.1.2.11 2003/08/03 14:54:53 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define ZR050_VERSION "v0.7.1" + +#include +#include +#include +#include + +#include +#include + +/* I/O commands, error codes */ +#include + +/* headerfile of this module */ +#include "zr36050.h" + +/* codec io API */ +#include "videocodec.h" + +/* it doesn't make sense to have more than 20 or so, + just to prevent some unwanted loops */ +#define MAX_CODECS 20 + +/* amount of chips attached via this driver */ +static int zr36050_codecs; + +/* debugging is available via module parameter */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* ========================================================================= + Local hardware I/O functions: + + read/write via codec layer (registers are located in the master device) + ========================================================================= */ + +/* read and write functions */ +static u8 +zr36050_read (struct zr36050 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if (ptr->codec->master_data->readreg) + value = (ptr->codec->master_data->readreg(ptr->codec, + reg)) & 0xFF; + else + dprintk(1, + KERN_ERR "%s: invalid I/O setup, nothing read!\n", + ptr->name); + + dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, + value); + + return value; +} + +static void +zr36050_write (struct zr36050 *ptr, + u16 reg, + u8 value) +{ + dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, + reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) + ptr->codec->master_data->writereg(ptr->codec, reg, value); + else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written!\n", + ptr->name); +} + +/* ========================================================================= + Local helper function: + + status read + ========================================================================= */ + +/* status is kept in datastructure */ +static u8 +zr36050_read_status1 (struct zr36050 *ptr) +{ + ptr->status1 = zr36050_read(ptr, ZR050_STATUS_1); + + zr36050_read(ptr, 0); + return ptr->status1; +} + +/* ========================================================================= + Local helper function: + + scale factor read + ========================================================================= */ + +/* scale factor is kept in datastructure */ +static u16 +zr36050_read_scalefactor (struct zr36050 *ptr) +{ + ptr->scalefact = (zr36050_read(ptr, ZR050_SF_HI) << 8) | + (zr36050_read(ptr, ZR050_SF_LO) & 0xFF); + + /* leave 0 selected for an eventually GO from master */ + zr36050_read(ptr, 0); + return ptr->scalefact; +} + +/* ========================================================================= + Local helper function: + + wait if codec is ready to proceed (end of processing) or time is over + ========================================================================= */ + +static void +zr36050_wait_end (struct zr36050 *ptr) +{ + int i = 0; + + while (!(zr36050_read_status1(ptr) & 0x4)) { + udelay(1); + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! + dprintk(1, + "%s: timeout at wait_end (last status: 0x%02x)\n", + ptr->name, ptr->status1); + break; + } + } +} + +/* ========================================================================= + Local helper function: + + basic test of "connectivity", writes/reads to/from memory the SOF marker + ========================================================================= */ + +static int +zr36050_basic_test (struct zr36050 *ptr) +{ + zr36050_write(ptr, ZR050_SOF_IDX, 0x00); + zr36050_write(ptr, ZR050_SOF_IDX + 1, 0x00); + if ((zr36050_read(ptr, ZR050_SOF_IDX) | + zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0x0000) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to jpeg processor!\n", + ptr->name); + return -ENXIO; + } + zr36050_write(ptr, ZR050_SOF_IDX, 0xff); + zr36050_write(ptr, ZR050_SOF_IDX + 1, 0xc0); + if (((zr36050_read(ptr, ZR050_SOF_IDX) << 8) | + zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0xffc0) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to jpeg processor!\n", + ptr->name); + return -ENXIO; + } + + zr36050_wait_end(ptr); + if ((ptr->status1 & 0x4) == 0) { + dprintk(1, + KERN_ERR + "%s: attach failed, jpeg processor failed (end flag)!\n", + ptr->name); + return -EBUSY; + } + + return 0; /* looks good! */ +} + +/* ========================================================================= + Local helper function: + + simple loop for pushing the init datasets + ========================================================================= */ + +static int +zr36050_pushit (struct zr36050 *ptr, + u16 startreg, + u16 len, + const char *data) +{ + int i = 0; + + dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, + startreg, len); + while (i < len) { + zr36050_write(ptr, startreg++, data[i++]); + } + + return i; +} + +/* ========================================================================= + Basic datasets: + + jpeg baseline setup data (you find it on lots places in internet, or just + extract it from any regular .jpg image...) + + Could be variable, but until it's not needed it they are just fixed to save + memory. Otherwise expand zr36050 structure with arrays, push the values to + it and initialize from there, as e.g. the linux zr36057/60 driver does it. + ========================================================================= */ + +static const char zr36050_dqt[0x86] = { + 0xff, 0xdb, //Marker: DQT + 0x00, 0x84, //Length: 2*65+2 + 0x00, //Pq,Tq first table + 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, + 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, + 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, + 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, + 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, + 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, + 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, + 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, + 0x01, //Pq,Tq second table + 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, + 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 +}; + +static const char zr36050_dht[0x1a4] = { + 0xff, 0xc4, //Marker: DHT + 0x01, 0xa2, //Length: 2*AC, 2*DC + 0x00, //DC first table + 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x01, //DC second table + 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x10, //AC first table + 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, + 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, + 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, + 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, + 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, + 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, + 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, + 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, + 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, + 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, + 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, + 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, + 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, + 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, + 0x11, //AC second table + 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, + 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, + 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, + 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, + 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, + 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, + 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, + 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, + 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, + 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, + 0xF9, 0xFA +}; + +/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ +#define NO_OF_COMPONENTS 0x3 //Y,U,V +#define BASELINE_PRECISION 0x8 //MCU size (?) +static const char zr36050_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT +static const char zr36050_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC +static const char zr36050_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC + +/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ +static const char zr36050_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; +static const char zr36050_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; + +/* ========================================================================= + Local helper functions: + + calculation and setup of parameter-dependent JPEG baseline segments + (needed for compression only) + ========================================================================= */ + +/* ------------------------------------------------------------------------- */ + +/* SOF (start of frame) segment depends on width, height and sampling ratio + of each color component */ + +static int +zr36050_set_sof (struct zr36050 *ptr) +{ + char sof_data[34]; // max. size of register set + int i; + + dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name, + ptr->width, ptr->height, NO_OF_COMPONENTS); + sof_data[0] = 0xff; + sof_data[1] = 0xc0; + sof_data[2] = 0x00; + sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; + sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36050 + sof_data[5] = (ptr->height) >> 8; + sof_data[6] = (ptr->height) & 0xff; + sof_data[7] = (ptr->width) >> 8; + sof_data[8] = (ptr->width) & 0xff; + sof_data[9] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sof_data[10 + (i * 3)] = i; // index identifier + sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | (ptr->v_samp_ratio[i]); // sampling ratios + sof_data[12 + (i * 3)] = zr36050_tq[i]; // Q table selection + } + return zr36050_pushit(ptr, ZR050_SOF_IDX, + (3 * NO_OF_COMPONENTS) + 10, sof_data); +} + +/* ------------------------------------------------------------------------- */ + +/* SOS (start of scan) segment depends on the used scan components + of each color component */ + +static int +zr36050_set_sos (struct zr36050 *ptr) +{ + char sos_data[16]; // max. size of register set + int i; + + dprintk(3, "%s: write SOS\n", ptr->name); + sos_data[0] = 0xff; + sos_data[1] = 0xda; + sos_data[2] = 0x00; + sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; + sos_data[4] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sos_data[5 + (i * 2)] = i; // index + sos_data[6 + (i * 2)] = (zr36050_td[i] << 4) | zr36050_ta[i]; // AC/DC tbl.sel. + } + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3F; + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; + return zr36050_pushit(ptr, ZR050_SOS1_IDX, + 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, + sos_data); +} + +/* ------------------------------------------------------------------------- */ + +/* DRI (define restart interval) */ + +static int +zr36050_set_dri (struct zr36050 *ptr) +{ + char dri_data[6]; // max. size of register set + + dprintk(3, "%s: write DRI\n", ptr->name); + dri_data[0] = 0xff; + dri_data[1] = 0xdd; + dri_data[2] = 0x00; + dri_data[3] = 0x04; + dri_data[4] = ptr->dri >> 8; + dri_data[5] = ptr->dri & 0xff; + return zr36050_pushit(ptr, ZR050_DRI_IDX, 6, dri_data); +} + +/* ========================================================================= + Setup function: + + Setup compression/decompression of Zoran's JPEG processor + ( see also zoran 36050 manual ) + + ... sorry for the spaghetti code ... + ========================================================================= */ +static void +zr36050_init (struct zr36050 *ptr) +{ + int sum = 0; + long bitcnt, tmp; + + if (ptr->mode == CODEC_DO_COMPRESSION) { + dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name); + + /* 050 communicates with 057 in master mode */ + zr36050_write(ptr, ZR050_HARDWARE, ZR050_HW_MSTR); + + /* encoding table preload for compression */ + zr36050_write(ptr, ZR050_MODE, + ZR050_MO_COMP | ZR050_MO_TLM); + zr36050_write(ptr, ZR050_OPTIONS, 0); + + /* disable all IRQs */ + zr36050_write(ptr, ZR050_INT_REQ_0, 0); + zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1 + + /* volume control settings */ + /*zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol);*/ + zr36050_write(ptr, ZR050_SF_HI, ptr->scalefact >> 8); + zr36050_write(ptr, ZR050_SF_LO, ptr->scalefact & 0xff); + + zr36050_write(ptr, ZR050_AF_HI, 0xff); + zr36050_write(ptr, ZR050_AF_M, 0xff); + zr36050_write(ptr, ZR050_AF_LO, 0xff); + + /* setup the variable jpeg tables */ + sum += zr36050_set_sof(ptr); + sum += zr36050_set_sos(ptr); + sum += zr36050_set_dri(ptr); + + /* setup the fixed jpeg tables - maybe variable, though - + * (see table init section above) */ + dprintk(3, "%s: write DQT, DHT, APP\n", ptr->name); + sum += zr36050_pushit(ptr, ZR050_DQT_IDX, + sizeof(zr36050_dqt), zr36050_dqt); + sum += zr36050_pushit(ptr, ZR050_DHT_IDX, + sizeof(zr36050_dht), zr36050_dht); + zr36050_write(ptr, ZR050_APP_IDX, 0xff); + zr36050_write(ptr, ZR050_APP_IDX + 1, 0xe0 + ptr->app.appn); + zr36050_write(ptr, ZR050_APP_IDX + 2, 0x00); + zr36050_write(ptr, ZR050_APP_IDX + 3, ptr->app.len + 2); + sum += zr36050_pushit(ptr, ZR050_APP_IDX + 4, 60, + ptr->app.data) + 4; + zr36050_write(ptr, ZR050_COM_IDX, 0xff); + zr36050_write(ptr, ZR050_COM_IDX + 1, 0xfe); + zr36050_write(ptr, ZR050_COM_IDX + 2, 0x00); + zr36050_write(ptr, ZR050_COM_IDX + 3, ptr->com.len + 2); + sum += zr36050_pushit(ptr, ZR050_COM_IDX + 4, 60, + ptr->com.data) + 4; + + /* do the internal huffman table preload */ + zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI); + + zr36050_write(ptr, ZR050_GO, 1); // launch codec + zr36050_wait_end(ptr); + dprintk(2, "%s: Status after table preload: 0x%02x\n", + ptr->name, ptr->status1); + + if ((ptr->status1 & 0x4) == 0) { + dprintk(1, KERN_ERR "%s: init aborted!\n", + ptr->name); + return; // something is wrong, its timed out!!!! + } + + /* setup misc. data for compression (target code sizes) */ + + /* size of compressed code to reach without header data */ + sum = ptr->real_code_vol - sum; + bitcnt = sum << 3; /* need the size in bits */ + + tmp = bitcnt >> 16; + dprintk(3, + "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", + ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); + zr36050_write(ptr, ZR050_TCV_NET_HI, tmp >> 8); + zr36050_write(ptr, ZR050_TCV_NET_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36050_write(ptr, ZR050_TCV_NET_ML, tmp >> 8); + zr36050_write(ptr, ZR050_TCV_NET_LO, tmp & 0xff); + + bitcnt -= bitcnt >> 7; // bits without stuffing + bitcnt -= ((bitcnt * 5) >> 6); // bits without eob + + tmp = bitcnt >> 16; + dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n", + ptr->name, bitcnt, tmp); + zr36050_write(ptr, ZR050_TCV_DATA_HI, tmp >> 8); + zr36050_write(ptr, ZR050_TCV_DATA_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36050_write(ptr, ZR050_TCV_DATA_ML, tmp >> 8); + zr36050_write(ptr, ZR050_TCV_DATA_LO, tmp & 0xff); + + /* compression setup with or without bitrate control */ + zr36050_write(ptr, ZR050_MODE, + ZR050_MO_COMP | ZR050_MO_PASS2 | + (ptr->bitrate_ctrl ? ZR050_MO_BRC : 0)); + + /* this headers seem to deliver "valid AVI" jpeg frames */ + zr36050_write(ptr, ZR050_MARKERS_EN, + ZR050_ME_DQT | ZR050_ME_DHT | + ((ptr->app.len > 0) ? ZR050_ME_APP : 0) | + ((ptr->com.len > 0) ? ZR050_ME_COM : 0)); + } else { + dprintk(2, "%s: EXPANSION SETUP\n", ptr->name); + + /* 050 communicates with 055 in master mode */ + zr36050_write(ptr, ZR050_HARDWARE, + ZR050_HW_MSTR | ZR050_HW_CFIS_2_CLK); + + /* encoding table preload */ + zr36050_write(ptr, ZR050_MODE, ZR050_MO_TLM); + + /* disable all IRQs */ + zr36050_write(ptr, ZR050_INT_REQ_0, 0); + zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1 + + dprintk(3, "%s: write DHT\n", ptr->name); + zr36050_pushit(ptr, ZR050_DHT_IDX, sizeof(zr36050_dht), + zr36050_dht); + + /* do the internal huffman table preload */ + zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI); + + zr36050_write(ptr, ZR050_GO, 1); // launch codec + zr36050_wait_end(ptr); + dprintk(2, "%s: Status after table preload: 0x%02x\n", + ptr->name, ptr->status1); + + if ((ptr->status1 & 0x4) == 0) { + dprintk(1, KERN_ERR "%s: init aborted!\n", + ptr->name); + return; // something is wrong, its timed out!!!! + } + + /* setup misc. data for expansion */ + zr36050_write(ptr, ZR050_MODE, 0); + zr36050_write(ptr, ZR050_MARKERS_EN, 0); + } + + /* adr on selected, to allow GO from master */ + zr36050_read(ptr, 0); +} + +/* ========================================================================= + CODEC API FUNCTIONS + + this functions are accessed by the master via the API structure + ========================================================================= */ + +/* set compression/expansion mode and launches codec - + this should be the last call from the master before starting processing */ +static int +zr36050_set_mode (struct videocodec *codec, + int mode) +{ + struct zr36050 *ptr = (struct zr36050 *) codec->data; + + dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); + + if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) + return -EINVAL; + + ptr->mode = mode; + zr36050_init(ptr); + + return 0; +} + +/* set picture size (norm is ignored as the codec doesn't know about it) */ +static int +zr36050_set_video (struct videocodec *codec, + struct tvnorm *norm, + struct vfe_settings *cap, + struct vfe_polarity *pol) +{ + struct zr36050 *ptr = (struct zr36050 *) codec->data; + int size; + + dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) q%d call\n", + ptr->name, norm->HStart, norm->VStart, + cap->x, cap->y, cap->width, cap->height, + cap->decimation, cap->quality); + /* if () return -EINVAL; + * trust the master driver that it knows what it does - so + * we allow invalid startx/y and norm for now ... */ + ptr->width = cap->width / (cap->decimation & 0xff); + ptr->height = cap->height / ((cap->decimation >> 8) & 0xff); + + /* (KM) JPEG quality */ + size = ptr->width * ptr->height; + size *= 16; /* size in bits */ + /* apply quality setting */ + size = size * cap->quality / 200; + + /* Minimum: 1kb */ + if (size < 8192) + size = 8192; + /* Maximum: 7/8 of code buffer */ + if (size > ptr->total_code_vol * 7) + size = ptr->total_code_vol * 7; + + ptr->real_code_vol = size >> 3; /* in bytes */ + + /* Set max_block_vol here (previously in zr36050_init, moved + * here for consistency with zr36060 code */ + zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol); + + return 0; +} + +/* additional control functions */ +static int +zr36050_control (struct videocodec *codec, + int type, + int size, + void *data) +{ + struct zr36050 *ptr = (struct zr36050 *) codec->data; + int *ival = (int *) data; + + dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, + size); + + switch (type) { + case CODEC_G_STATUS: /* get last status */ + if (size != sizeof(int)) + return -EFAULT; + zr36050_read_status1(ptr); + *ival = ptr->status1; + break; + + case CODEC_G_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + *ival = CODEC_MODE_BJPG; + break; + + case CODEC_S_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + if (*ival != CODEC_MODE_BJPG) + return -EINVAL; + /* not needed, do nothing */ + return 0; + + case CODEC_G_VFE: + case CODEC_S_VFE: + /* not needed, do nothing */ + return 0; + + case CODEC_S_MMAP: + /* not available, give an error */ + return -ENXIO; + + case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + *ival = ptr->total_code_vol; + break; + + case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + ptr->total_code_vol = *ival; + /* (Kieran Morrissey) + * code copied from zr36060.c to ensure proper bitrate */ + ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; + break; + + case CODEC_G_JPEG_SCALE: /* get scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + *ival = zr36050_read_scalefactor(ptr); + break; + + case CODEC_S_JPEG_SCALE: /* set scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + ptr->scalefact = *ival; + break; + + case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + *app = ptr->app; + break; + } + + case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + ptr->app = *app; + break; + } + + case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + *com = ptr->com; + break; + } + + case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + ptr->com = *com; + break; + } + + default: + return -EINVAL; + } + + return size; +} + +/* ========================================================================= + Exit and unregister function: + + Deinitializes Zoran's JPEG processor + ========================================================================= */ + +static int +zr36050_unset (struct videocodec *codec) +{ + struct zr36050 *ptr = codec->data; + + if (ptr) { + /* do wee need some codec deinit here, too ???? */ + + dprintk(1, "%s: finished codec #%d\n", ptr->name, + ptr->num); + kfree(ptr); + codec->data = NULL; + + zr36050_codecs--; + return 0; + } + + return -EFAULT; +} + +/* ========================================================================= + Setup and registry function: + + Initializes Zoran's JPEG processor + + Also sets pixel size, average code size, mode (compr./decompr.) + (the given size is determined by the processor with the video interface) + ========================================================================= */ + +static int +zr36050_setup (struct videocodec *codec) +{ + struct zr36050 *ptr; + int res; + + dprintk(2, "zr36050: initializing MJPEG subsystem #%d.\n", + zr36050_codecs); + + if (zr36050_codecs == MAX_CODECS) { + dprintk(1, + KERN_ERR "zr36050: Can't attach more codecs!\n"); + return -ENOSPC; + } + //mem structure init + codec->data = ptr = kzalloc(sizeof(struct zr36050), GFP_KERNEL); + if (NULL == ptr) { + dprintk(1, KERN_ERR "zr36050: Can't get enough memory!\n"); + return -ENOMEM; + } + + snprintf(ptr->name, sizeof(ptr->name), "zr36050[%d]", + zr36050_codecs); + ptr->num = zr36050_codecs++; + ptr->codec = codec; + + //testing + res = zr36050_basic_test(ptr); + if (res < 0) { + zr36050_unset(codec); + return res; + } + //final setup + memcpy(ptr->h_samp_ratio, zr36050_decimation_h, 8); + memcpy(ptr->v_samp_ratio, zr36050_decimation_v, 8); + + ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag + * (what is the difference?) */ + ptr->mode = CODEC_DO_COMPRESSION; + ptr->width = 384; + ptr->height = 288; + ptr->total_code_vol = 16000; + ptr->max_block_vol = 240; + ptr->scalefact = 0x100; + ptr->dri = 1; + + /* no app/com marker by default */ + ptr->app.appn = 0; + ptr->app.len = 0; + ptr->com.len = 0; + + zr36050_init(ptr); + + dprintk(1, KERN_INFO "%s: codec attached and running\n", + ptr->name); + + return 0; +} + +static const struct videocodec zr36050_codec = { + .owner = THIS_MODULE, + .name = "zr36050", + .magic = 0L, // magic not used + .flags = + CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | + CODEC_FLAG_DECODER, + .type = CODEC_TYPE_ZR36050, + .setup = zr36050_setup, // functionality + .unset = zr36050_unset, + .set_mode = zr36050_set_mode, + .set_video = zr36050_set_video, + .control = zr36050_control, + // others are not used +}; + +/* ========================================================================= + HOOK IN DRIVER AS KERNEL MODULE + ========================================================================= */ + +static int __init +zr36050_init_module (void) +{ + //dprintk(1, "ZR36050 driver %s\n",ZR050_VERSION); + zr36050_codecs = 0; + return videocodec_register(&zr36050_codec); +} + +static void __exit +zr36050_cleanup_module (void) +{ + if (zr36050_codecs) { + dprintk(1, + "zr36050: something's wrong - %d codecs left somehow.\n", + zr36050_codecs); + } + videocodec_unregister(&zr36050_codec); +} + +module_init(zr36050_init_module); +module_exit(zr36050_cleanup_module); + +MODULE_AUTHOR("Wolfgang Scherr "); +MODULE_DESCRIPTION("Driver module for ZR36050 jpeg processors " + ZR050_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/zoran/zr36050.h b/drivers/media/pci/zoran/zr36050.h new file mode 100644 index 00000000..9f52f0cd --- /dev/null +++ b/drivers/media/pci/zoran/zr36050.h @@ -0,0 +1,184 @@ +/* + * Zoran ZR36050 basic configuration functions - header file + * + * Copyright (C) 2001 Wolfgang Scherr + * + * $Id: zr36050.h,v 1.1.2.2 2003/01/14 21:18:22 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#ifndef ZR36050_H +#define ZR36050_H + +#include "videocodec.h" + +/* data stored for each zoran jpeg codec chip */ +struct zr36050 { + char name[32]; + int num; + /* io datastructure */ + struct videocodec *codec; + // last coder status + __u8 status1; + // actual coder setup + int mode; + + __u16 width; + __u16 height; + + __u16 bitrate_ctrl; + + __u32 total_code_vol; + __u32 real_code_vol; + __u16 max_block_vol; + + __u8 h_samp_ratio[8]; + __u8 v_samp_ratio[8]; + __u16 scalefact; + __u16 dri; + + /* com/app marker */ + struct jpeg_com_marker com; + struct jpeg_app_marker app; +}; + +/* zr36050 register addresses */ +#define ZR050_GO 0x000 +#define ZR050_HARDWARE 0x002 +#define ZR050_MODE 0x003 +#define ZR050_OPTIONS 0x004 +#define ZR050_MBCV 0x005 +#define ZR050_MARKERS_EN 0x006 +#define ZR050_INT_REQ_0 0x007 +#define ZR050_INT_REQ_1 0x008 +#define ZR050_TCV_NET_HI 0x009 +#define ZR050_TCV_NET_MH 0x00a +#define ZR050_TCV_NET_ML 0x00b +#define ZR050_TCV_NET_LO 0x00c +#define ZR050_TCV_DATA_HI 0x00d +#define ZR050_TCV_DATA_MH 0x00e +#define ZR050_TCV_DATA_ML 0x00f +#define ZR050_TCV_DATA_LO 0x010 +#define ZR050_SF_HI 0x011 +#define ZR050_SF_LO 0x012 +#define ZR050_AF_HI 0x013 +#define ZR050_AF_M 0x014 +#define ZR050_AF_LO 0x015 +#define ZR050_ACV_HI 0x016 +#define ZR050_ACV_MH 0x017 +#define ZR050_ACV_ML 0x018 +#define ZR050_ACV_LO 0x019 +#define ZR050_ACT_HI 0x01a +#define ZR050_ACT_MH 0x01b +#define ZR050_ACT_ML 0x01c +#define ZR050_ACT_LO 0x01d +#define ZR050_ACV_TRUN_HI 0x01e +#define ZR050_ACV_TRUN_MH 0x01f +#define ZR050_ACV_TRUN_ML 0x020 +#define ZR050_ACV_TRUN_LO 0x021 +#define ZR050_STATUS_0 0x02e +#define ZR050_STATUS_1 0x02f + +#define ZR050_SOF_IDX 0x040 +#define ZR050_SOS1_IDX 0x07a +#define ZR050_SOS2_IDX 0x08a +#define ZR050_SOS3_IDX 0x09a +#define ZR050_SOS4_IDX 0x0aa +#define ZR050_DRI_IDX 0x0c0 +#define ZR050_DNL_IDX 0x0c6 +#define ZR050_DQT_IDX 0x0cc +#define ZR050_DHT_IDX 0x1d4 +#define ZR050_APP_IDX 0x380 +#define ZR050_COM_IDX 0x3c0 + +/* zr36050 hardware register bits */ + +#define ZR050_HW_BSWD 0x80 +#define ZR050_HW_MSTR 0x40 +#define ZR050_HW_DMA 0x20 +#define ZR050_HW_CFIS_1_CLK 0x00 +#define ZR050_HW_CFIS_2_CLK 0x04 +#define ZR050_HW_CFIS_3_CLK 0x08 +#define ZR050_HW_CFIS_4_CLK 0x0C +#define ZR050_HW_CFIS_5_CLK 0x10 +#define ZR050_HW_CFIS_6_CLK 0x14 +#define ZR050_HW_CFIS_7_CLK 0x18 +#define ZR050_HW_CFIS_8_CLK 0x1C +#define ZR050_HW_BELE 0x01 + +/* zr36050 mode register bits */ + +#define ZR050_MO_COMP 0x80 +#define ZR050_MO_COMP 0x80 +#define ZR050_MO_ATP 0x40 +#define ZR050_MO_PASS2 0x20 +#define ZR050_MO_TLM 0x10 +#define ZR050_MO_DCONLY 0x08 +#define ZR050_MO_BRC 0x04 + +#define ZR050_MO_ATP 0x40 +#define ZR050_MO_PASS2 0x20 +#define ZR050_MO_TLM 0x10 +#define ZR050_MO_DCONLY 0x08 + +/* zr36050 option register bits */ + +#define ZR050_OP_NSCN_1 0x00 +#define ZR050_OP_NSCN_2 0x20 +#define ZR050_OP_NSCN_3 0x40 +#define ZR050_OP_NSCN_4 0x60 +#define ZR050_OP_NSCN_5 0x80 +#define ZR050_OP_NSCN_6 0xA0 +#define ZR050_OP_NSCN_7 0xC0 +#define ZR050_OP_NSCN_8 0xE0 +#define ZR050_OP_OVF 0x10 + + +/* zr36050 markers-enable register bits */ + +#define ZR050_ME_APP 0x80 +#define ZR050_ME_COM 0x40 +#define ZR050_ME_DRI 0x20 +#define ZR050_ME_DQT 0x10 +#define ZR050_ME_DHT 0x08 +#define ZR050_ME_DNL 0x04 +#define ZR050_ME_DQTI 0x02 +#define ZR050_ME_DHTI 0x01 + +/* zr36050 status0/1 register bit masks */ + +#define ZR050_ST_RST_MASK 0x20 +#define ZR050_ST_SOF_MASK 0x02 +#define ZR050_ST_SOS_MASK 0x02 +#define ZR050_ST_DATRDY_MASK 0x80 +#define ZR050_ST_MRKDET_MASK 0x40 +#define ZR050_ST_RFM_MASK 0x10 +#define ZR050_ST_RFD_MASK 0x08 +#define ZR050_ST_END_MASK 0x04 +#define ZR050_ST_TCVOVF_MASK 0x02 +#define ZR050_ST_DATOVF_MASK 0x01 + +/* pixel component idx */ + +#define ZR050_Y_COMPONENT 0 +#define ZR050_U_COMPONENT 1 +#define ZR050_V_COMPONENT 2 + +#endif /*fndef ZR36050_H */ diff --git a/drivers/media/pci/zoran/zr36057.h b/drivers/media/pci/zoran/zr36057.h new file mode 100644 index 00000000..54c9362a --- /dev/null +++ b/drivers/media/pci/zoran/zr36057.h @@ -0,0 +1,168 @@ +/* + * zr36057.h - zr36057 register offsets + * + * Copyright (C) 1998 Dave Perks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ZR36057_H_ +#define _ZR36057_H_ + + +/* Zoran ZR36057 registers */ + +#define ZR36057_VFEHCR 0x000 /* Video Front End, Horizontal Configuration Register */ +#define ZR36057_VFEHCR_HSPol (1<<30) +#define ZR36057_VFEHCR_HStart 10 +#define ZR36057_VFEHCR_HEnd 0 +#define ZR36057_VFEHCR_Hmask 0x3ff + +#define ZR36057_VFEVCR 0x004 /* Video Front End, Vertical Configuration Register */ +#define ZR36057_VFEVCR_VSPol (1<<30) +#define ZR36057_VFEVCR_VStart 10 +#define ZR36057_VFEVCR_VEnd 0 +#define ZR36057_VFEVCR_Vmask 0x3ff + +#define ZR36057_VFESPFR 0x008 /* Video Front End, Scaler and Pixel Format Register */ +#define ZR36057_VFESPFR_ExtFl (1<<26) +#define ZR36057_VFESPFR_TopField (1<<25) +#define ZR36057_VFESPFR_VCLKPol (1<<24) +#define ZR36057_VFESPFR_HFilter 21 +#define ZR36057_VFESPFR_HorDcm 14 +#define ZR36057_VFESPFR_VerDcm 8 +#define ZR36057_VFESPFR_DispMode 6 +#define ZR36057_VFESPFR_YUV422 (0<<3) +#define ZR36057_VFESPFR_RGB888 (1<<3) +#define ZR36057_VFESPFR_RGB565 (2<<3) +#define ZR36057_VFESPFR_RGB555 (3<<3) +#define ZR36057_VFESPFR_ErrDif (1<<2) +#define ZR36057_VFESPFR_Pack24 (1<<1) +#define ZR36057_VFESPFR_LittleEndian (1<<0) + +#define ZR36057_VDTR 0x00c /* Video Display "Top" Register */ + +#define ZR36057_VDBR 0x010 /* Video Display "Bottom" Register */ + +#define ZR36057_VSSFGR 0x014 /* Video Stride, Status, and Frame Grab Register */ +#define ZR36057_VSSFGR_DispStride 16 +#define ZR36057_VSSFGR_VidOvf (1<<8) +#define ZR36057_VSSFGR_SnapShot (1<<1) +#define ZR36057_VSSFGR_FrameGrab (1<<0) + +#define ZR36057_VDCR 0x018 /* Video Display Configuration Register */ +#define ZR36057_VDCR_VidEn (1<<31) +#define ZR36057_VDCR_MinPix 24 +#define ZR36057_VDCR_Triton (1<<24) +#define ZR36057_VDCR_VidWinHt 12 +#define ZR36057_VDCR_VidWinWid 0 + +#define ZR36057_MMTR 0x01c /* Masking Map "Top" Register */ + +#define ZR36057_MMBR 0x020 /* Masking Map "Bottom" Register */ + +#define ZR36057_OCR 0x024 /* Overlay Control Register */ +#define ZR36057_OCR_OvlEnable (1 << 15) +#define ZR36057_OCR_MaskStride 0 + +#define ZR36057_SPGPPCR 0x028 /* System, PCI, and General Purpose Pins Control Register */ +#define ZR36057_SPGPPCR_SoftReset (1<<24) + +#define ZR36057_GPPGCR1 0x02c /* General Purpose Pins and GuestBus Control Register (1) */ + +#define ZR36057_MCSAR 0x030 /* MPEG Code Source Address Register */ + +#define ZR36057_MCTCR 0x034 /* MPEG Code Transfer Control Register */ +#define ZR36057_MCTCR_CodTime (1 << 30) +#define ZR36057_MCTCR_CEmpty (1 << 29) +#define ZR36057_MCTCR_CFlush (1 << 28) +#define ZR36057_MCTCR_CodGuestID 20 +#define ZR36057_MCTCR_CodGuestReg 16 + +#define ZR36057_MCMPR 0x038 /* MPEG Code Memory Pointer Register */ + +#define ZR36057_ISR 0x03c /* Interrupt Status Register */ +#define ZR36057_ISR_GIRQ1 (1<<30) +#define ZR36057_ISR_GIRQ0 (1<<29) +#define ZR36057_ISR_CodRepIRQ (1<<28) +#define ZR36057_ISR_JPEGRepIRQ (1<<27) + +#define ZR36057_ICR 0x040 /* Interrupt Control Register */ +#define ZR36057_ICR_GIRQ1 (1<<30) +#define ZR36057_ICR_GIRQ0 (1<<29) +#define ZR36057_ICR_CodRepIRQ (1<<28) +#define ZR36057_ICR_JPEGRepIRQ (1<<27) +#define ZR36057_ICR_IntPinEn (1<<24) + +#define ZR36057_I2CBR 0x044 /* I2C Bus Register */ +#define ZR36057_I2CBR_SDA (1<<1) +#define ZR36057_I2CBR_SCL (1<<0) + +#define ZR36057_JMC 0x100 /* JPEG Mode and Control */ +#define ZR36057_JMC_JPG (1 << 31) +#define ZR36057_JMC_JPGExpMode (0 << 29) +#define ZR36057_JMC_JPGCmpMode (1 << 29) +#define ZR36057_JMC_MJPGExpMode (2 << 29) +#define ZR36057_JMC_MJPGCmpMode (3 << 29) +#define ZR36057_JMC_RTBUSY_FB (1 << 6) +#define ZR36057_JMC_Go_en (1 << 5) +#define ZR36057_JMC_SyncMstr (1 << 4) +#define ZR36057_JMC_Fld_per_buff (1 << 3) +#define ZR36057_JMC_VFIFO_FB (1 << 2) +#define ZR36057_JMC_CFIFO_FB (1 << 1) +#define ZR36057_JMC_Stll_LitEndian (1 << 0) + +#define ZR36057_JPC 0x104 /* JPEG Process Control */ +#define ZR36057_JPC_P_Reset (1 << 7) +#define ZR36057_JPC_CodTrnsEn (1 << 5) +#define ZR36057_JPC_Active (1 << 0) + +#define ZR36057_VSP 0x108 /* Vertical Sync Parameters */ +#define ZR36057_VSP_VsyncSize 16 +#define ZR36057_VSP_FrmTot 0 + +#define ZR36057_HSP 0x10c /* Horizontal Sync Parameters */ +#define ZR36057_HSP_HsyncStart 16 +#define ZR36057_HSP_LineTot 0 + +#define ZR36057_FHAP 0x110 /* Field Horizontal Active Portion */ +#define ZR36057_FHAP_NAX 16 +#define ZR36057_FHAP_PAX 0 + +#define ZR36057_FVAP 0x114 /* Field Vertical Active Portion */ +#define ZR36057_FVAP_NAY 16 +#define ZR36057_FVAP_PAY 0 + +#define ZR36057_FPP 0x118 /* Field Process Parameters */ +#define ZR36057_FPP_Odd_Even (1 << 0) + +#define ZR36057_JCBA 0x11c /* JPEG Code Base Address */ + +#define ZR36057_JCFT 0x120 /* JPEG Code FIFO Threshold */ + +#define ZR36057_JCGI 0x124 /* JPEG Codec Guest ID */ +#define ZR36057_JCGI_JPEGuestID 4 +#define ZR36057_JCGI_JPEGuestReg 0 + +#define ZR36057_GCR2 0x12c /* GuestBus Control Register (2) */ + +#define ZR36057_POR 0x200 /* Post Office Register */ +#define ZR36057_POR_POPen (1<<25) +#define ZR36057_POR_POTime (1<<24) +#define ZR36057_POR_PODir (1<<23) + +#define ZR36057_STR 0x300 /* "Still" Transfer Register */ + +#endif diff --git a/drivers/media/pci/zoran/zr36060.c b/drivers/media/pci/zoran/zr36060.c new file mode 100644 index 00000000..f08546fe --- /dev/null +++ b/drivers/media/pci/zoran/zr36060.c @@ -0,0 +1,1010 @@ +/* + * Zoran ZR36060 basic configuration functions + * + * Copyright (C) 2002 Laurent Pinchart + * + * $Id: zr36060.c,v 1.1.2.22 2003/05/06 09:35:36 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define ZR060_VERSION "v0.7" + +#include +#include +#include +#include + +#include +#include + +/* I/O commands, error codes */ +#include + +/* headerfile of this module */ +#include "zr36060.h" + +/* codec io API */ +#include "videocodec.h" + +/* it doesn't make sense to have more than 20 or so, + just to prevent some unwanted loops */ +#define MAX_CODECS 20 + +/* amount of chips attached via this driver */ +static int zr36060_codecs; + +static bool low_bitrate; +module_param(low_bitrate, bool, 0); +MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate"); + +/* debugging is available via module parameter */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* ========================================================================= + Local hardware I/O functions: + + read/write via codec layer (registers are located in the master device) + ========================================================================= */ + +/* read and write functions */ +static u8 +zr36060_read (struct zr36060 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if (ptr->codec->master_data->readreg) + value = (ptr->codec->master_data->readreg(ptr->codec, + reg)) & 0xff; + else + dprintk(1, + KERN_ERR "%s: invalid I/O setup, nothing read!\n", + ptr->name); + + //dprintk(4, "%s: reading from 0x%04x: %02x\n",ptr->name,reg,value); + + return value; +} + +static void +zr36060_write(struct zr36060 *ptr, + u16 reg, + u8 value) +{ + //dprintk(4, "%s: writing 0x%02x to 0x%04x\n",ptr->name,value,reg); + dprintk(4, "0x%02x @0x%04x\n", value, reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) + ptr->codec->master_data->writereg(ptr->codec, reg, value); + else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written!\n", + ptr->name); +} + +/* ========================================================================= + Local helper function: + + status read + ========================================================================= */ + +/* status is kept in datastructure */ +static u8 +zr36060_read_status (struct zr36060 *ptr) +{ + ptr->status = zr36060_read(ptr, ZR060_CFSR); + + zr36060_read(ptr, 0); + return ptr->status; +} + +/* ========================================================================= + Local helper function: + + scale factor read + ========================================================================= */ + +/* scale factor is kept in datastructure */ +static u16 +zr36060_read_scalefactor (struct zr36060 *ptr) +{ + ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) | + (zr36060_read(ptr, ZR060_SF_LO) & 0xFF); + + /* leave 0 selected for an eventually GO from master */ + zr36060_read(ptr, 0); + return ptr->scalefact; +} + +/* ========================================================================= + Local helper function: + + wait if codec is ready to proceed (end of processing) or time is over + ========================================================================= */ + +static void +zr36060_wait_end (struct zr36060 *ptr) +{ + int i = 0; + + while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) { + udelay(1); + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! + dprintk(1, + "%s: timeout at wait_end (last status: 0x%02x)\n", + ptr->name, ptr->status); + break; + } + } +} + +/* ========================================================================= + Local helper function: + + basic test of "connectivity", writes/reads to/from memory the SOF marker + ========================================================================= */ + +static int +zr36060_basic_test (struct zr36060 *ptr) +{ + if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) && + (zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to jpeg processor!\n", + ptr->name); + return -ENXIO; + } + + zr36060_wait_end(ptr); + if (ptr->status & ZR060_CFSR_Busy) { + dprintk(1, + KERN_ERR + "%s: attach failed, jpeg processor failed (end flag)!\n", + ptr->name); + return -EBUSY; + } + + return 0; /* looks good! */ +} + +/* ========================================================================= + Local helper function: + + simple loop for pushing the init datasets + ========================================================================= */ + +static int +zr36060_pushit (struct zr36060 *ptr, + u16 startreg, + u16 len, + const char *data) +{ + int i = 0; + + dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, + startreg, len); + while (i < len) { + zr36060_write(ptr, startreg++, data[i++]); + } + + return i; +} + +/* ========================================================================= + Basic datasets: + + jpeg baseline setup data (you find it on lots places in internet, or just + extract it from any regular .jpg image...) + + Could be variable, but until it's not needed it they are just fixed to save + memory. Otherwise expand zr36060 structure with arrays, push the values to + it and initialize from there, as e.g. the linux zr36057/60 driver does it. + ========================================================================= */ + +static const char zr36060_dqt[0x86] = { + 0xff, 0xdb, //Marker: DQT + 0x00, 0x84, //Length: 2*65+2 + 0x00, //Pq,Tq first table + 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, + 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, + 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, + 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, + 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, + 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, + 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, + 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, + 0x01, //Pq,Tq second table + 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, + 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 +}; + +static const char zr36060_dht[0x1a4] = { + 0xff, 0xc4, //Marker: DHT + 0x01, 0xa2, //Length: 2*AC, 2*DC + 0x00, //DC first table + 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x01, //DC second table + 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x10, //AC first table + 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, + 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, + 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, + 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, + 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, + 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, + 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, + 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, + 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, + 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, + 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, + 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, + 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, + 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, + 0x11, //AC second table + 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, + 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, + 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, + 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, + 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, + 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, + 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, + 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, + 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, + 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, + 0xF9, 0xFA +}; + +/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ +#define NO_OF_COMPONENTS 0x3 //Y,U,V +#define BASELINE_PRECISION 0x8 //MCU size (?) +static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT +static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC +static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC + +/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ +static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; +static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; + +/* ========================================================================= + Local helper functions: + + calculation and setup of parameter-dependent JPEG baseline segments + (needed for compression only) + ========================================================================= */ + +/* ------------------------------------------------------------------------- */ + +/* SOF (start of frame) segment depends on width, height and sampling ratio + of each color component */ + +static int +zr36060_set_sof (struct zr36060 *ptr) +{ + char sof_data[34]; // max. size of register set + int i; + + dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name, + ptr->width, ptr->height, NO_OF_COMPONENTS); + sof_data[0] = 0xff; + sof_data[1] = 0xc0; + sof_data[2] = 0x00; + sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; + sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36060 + sof_data[5] = (ptr->height) >> 8; + sof_data[6] = (ptr->height) & 0xff; + sof_data[7] = (ptr->width) >> 8; + sof_data[8] = (ptr->width) & 0xff; + sof_data[9] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sof_data[10 + (i * 3)] = i; // index identifier + sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | + (ptr->v_samp_ratio[i]); // sampling ratios + sof_data[12 + (i * 3)] = zr36060_tq[i]; // Q table selection + } + return zr36060_pushit(ptr, ZR060_SOF_IDX, + (3 * NO_OF_COMPONENTS) + 10, sof_data); +} + +/* ------------------------------------------------------------------------- */ + +/* SOS (start of scan) segment depends on the used scan components + of each color component */ + +static int +zr36060_set_sos (struct zr36060 *ptr) +{ + char sos_data[16]; // max. size of register set + int i; + + dprintk(3, "%s: write SOS\n", ptr->name); + sos_data[0] = 0xff; + sos_data[1] = 0xda; + sos_data[2] = 0x00; + sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; + sos_data[4] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sos_data[5 + (i * 2)] = i; // index + sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) | + zr36060_ta[i]; // AC/DC tbl.sel. + } + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f; + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; + return zr36060_pushit(ptr, ZR060_SOS_IDX, + 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, + sos_data); +} + +/* ------------------------------------------------------------------------- */ + +/* DRI (define restart interval) */ + +static int +zr36060_set_dri (struct zr36060 *ptr) +{ + char dri_data[6]; // max. size of register set + + dprintk(3, "%s: write DRI\n", ptr->name); + dri_data[0] = 0xff; + dri_data[1] = 0xdd; + dri_data[2] = 0x00; + dri_data[3] = 0x04; + dri_data[4] = (ptr->dri) >> 8; + dri_data[5] = (ptr->dri) & 0xff; + return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data); +} + +/* ========================================================================= + Setup function: + + Setup compression/decompression of Zoran's JPEG processor + ( see also zoran 36060 manual ) + + ... sorry for the spaghetti code ... + ========================================================================= */ +static void +zr36060_init (struct zr36060 *ptr) +{ + int sum = 0; + long bitcnt, tmp; + + if (ptr->mode == CODEC_DO_COMPRESSION) { + dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* 060 communicates with 067 in master mode */ + zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); + + /* Compression with or without variable scale factor */ + /*FIXME: What about ptr->bitrate_ctrl? */ + zr36060_write(ptr, ZR060_CMR, + ZR060_CMR_Comp | ZR060_CMR_Pass2 | + ZR060_CMR_BRB); + + /* Must be zero */ + zr36060_write(ptr, ZR060_MBZ, 0x00); + zr36060_write(ptr, ZR060_TCR_HI, 0x00); + zr36060_write(ptr, ZR060_TCR_LO, 0x00); + + /* Disable all IRQs - no DataErr means autoreset */ + zr36060_write(ptr, ZR060_IMR, 0); + + /* volume control settings */ + zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8); + zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff); + + zr36060_write(ptr, ZR060_AF_HI, 0xff); + zr36060_write(ptr, ZR060_AF_M, 0xff); + zr36060_write(ptr, ZR060_AF_LO, 0xff); + + /* setup the variable jpeg tables */ + sum += zr36060_set_sof(ptr); + sum += zr36060_set_sos(ptr); + sum += zr36060_set_dri(ptr); + + /* setup the fixed jpeg tables - maybe variable, though - + * (see table init section above) */ + sum += + zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt), + zr36060_dqt); + sum += + zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), + zr36060_dht); + zr36060_write(ptr, ZR060_APP_IDX, 0xff); + zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn); + zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00); + zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2); + sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60, + ptr->app.data) + 4; + zr36060_write(ptr, ZR060_COM_IDX, 0xff); + zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe); + zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00); + zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2); + sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60, + ptr->com.data) + 4; + + /* setup misc. data for compression (target code sizes) */ + + /* size of compressed code to reach without header data */ + sum = ptr->real_code_vol - sum; + bitcnt = sum << 3; /* need the size in bits */ + + tmp = bitcnt >> 16; + dprintk(3, + "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", + ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); + zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff); + + bitcnt -= bitcnt >> 7; // bits without stuffing + bitcnt -= ((bitcnt * 5) >> 6); // bits without eob + + tmp = bitcnt >> 16; + dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n", + ptr->name, bitcnt, tmp); + zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff); + + /* JPEG markers to be included in the compressed stream */ + zr36060_write(ptr, ZR060_MER, + ZR060_MER_DQT | ZR060_MER_DHT | + ((ptr->com.len > 0) ? ZR060_MER_Com : 0) | + ((ptr->app.len > 0) ? ZR060_MER_App : 0)); + + /* Setup the Video Frontend */ + /* Limit pixel range to 16..235 as per CCIR-601 */ + zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); + + } else { + dprintk(2, "%s: EXPANSION SETUP\n", ptr->name); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* 060 communicates with 067 in master mode */ + zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); + + /* Decompression */ + zr36060_write(ptr, ZR060_CMR, 0); + + /* Must be zero */ + zr36060_write(ptr, ZR060_MBZ, 0x00); + zr36060_write(ptr, ZR060_TCR_HI, 0x00); + zr36060_write(ptr, ZR060_TCR_LO, 0x00); + + /* Disable all IRQs - no DataErr means autoreset */ + zr36060_write(ptr, ZR060_IMR, 0); + + /* setup misc. data for expansion */ + zr36060_write(ptr, ZR060_MER, 0); + + /* setup the fixed jpeg tables - maybe variable, though - + * (see table init section above) */ + zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), + zr36060_dht); + + /* Setup the Video Frontend */ + //zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FIExt); + //this doesn't seem right and doesn't work... + zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); + } + + /* Load the tables */ + zr36060_write(ptr, ZR060_LOAD, + ZR060_LOAD_SyncRst | ZR060_LOAD_Load); + zr36060_wait_end(ptr); + dprintk(2, "%s: Status after table preload: 0x%02x\n", ptr->name, + ptr->status); + + if (ptr->status & ZR060_CFSR_Busy) { + dprintk(1, KERN_ERR "%s: init aborted!\n", ptr->name); + return; // something is wrong, its timed out!!!! + } +} + +/* ========================================================================= + CODEC API FUNCTIONS + + this functions are accessed by the master via the API structure + ========================================================================= */ + +/* set compression/expansion mode and launches codec - + this should be the last call from the master before starting processing */ +static int +zr36060_set_mode (struct videocodec *codec, + int mode) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + + dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); + + if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) + return -EINVAL; + + ptr->mode = mode; + zr36060_init(ptr); + + return 0; +} + +/* set picture size (norm is ignored as the codec doesn't know about it) */ +static int +zr36060_set_video (struct videocodec *codec, + struct tvnorm *norm, + struct vfe_settings *cap, + struct vfe_polarity *pol) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + u32 reg; + int size; + + dprintk(2, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name, + cap->x, cap->y, cap->width, cap->height, cap->decimation); + + /* if () return -EINVAL; + * trust the master driver that it knows what it does - so + * we allow invalid startx/y and norm for now ... */ + ptr->width = cap->width / (cap->decimation & 0xff); + ptr->height = cap->height / (cap->decimation >> 8); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* Note that VSPol/HSPol bits in zr36060 have the opposite + * meaning of their zr360x7 counterparts with the same names + * N.b. for VSPol this is only true if FIVEdge = 0 (default, + * left unchanged here - in accordance with datasheet). + */ + reg = (!pol->vsync_pol ? ZR060_VPR_VSPol : 0) + | (!pol->hsync_pol ? ZR060_VPR_HSPol : 0) + | (pol->field_pol ? ZR060_VPR_FIPol : 0) + | (pol->blank_pol ? ZR060_VPR_BLPol : 0) + | (pol->subimg_pol ? ZR060_VPR_SImgPol : 0) + | (pol->poe_pol ? ZR060_VPR_PoePol : 0) + | (pol->pvalid_pol ? ZR060_VPR_PValPol : 0) + | (pol->vclk_pol ? ZR060_VPR_VCLKPol : 0); + zr36060_write(ptr, ZR060_VPR, reg); + + reg = 0; + switch (cap->decimation & 0xff) { + default: + case 1: + break; + + case 2: + reg |= ZR060_SR_HScale2; + break; + + case 4: + reg |= ZR060_SR_HScale4; + break; + } + + switch (cap->decimation >> 8) { + default: + case 1: + break; + + case 2: + reg |= ZR060_SR_VScale; + break; + } + zr36060_write(ptr, ZR060_SR, reg); + + zr36060_write(ptr, ZR060_BCR_Y, 0x00); + zr36060_write(ptr, ZR060_BCR_U, 0x80); + zr36060_write(ptr, ZR060_BCR_V, 0x80); + + /* sync generator */ + + reg = norm->Ht - 1; /* Vtotal */ + zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff); + + reg = norm->Wt - 1; /* Htotal */ + zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff); + + reg = 6 - 1; /* VsyncSize */ + zr36060_write(ptr, ZR060_SGR_VSYNC, reg); + + //reg = 30 - 1; /* HsyncSize */ +///*CP*/ reg = (zr->params.norm == 1 ? 57 : 68); + reg = 68; + zr36060_write(ptr, ZR060_SGR_HSYNC, reg); + + reg = norm->VStart - 1; /* BVstart */ + zr36060_write(ptr, ZR060_SGR_BVSTART, reg); + + reg += norm->Ha / 2; /* BVend */ + zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff); + + reg = norm->HStart - 1; /* BHstart */ + zr36060_write(ptr, ZR060_SGR_BHSTART, reg); + + reg += norm->Wa; /* BHend */ + zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff); + + /* active area */ + reg = cap->y + norm->VStart; /* Vstart */ + zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff); + + reg += cap->height; /* Vend */ + zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff); + + reg = cap->x + norm->HStart; /* Hstart */ + zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff); + + reg += cap->width; /* Hend */ + zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff); + + /* subimage area */ + reg = norm->VStart - 4; /* SVstart */ + zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff); + + reg += norm->Ha / 2 + 8; /* SVend */ + zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff); + + reg = norm->HStart /*+ 64 */ - 4; /* SHstart */ + zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff); + + reg += norm->Wa + 8; /* SHend */ + zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff); + + size = ptr->width * ptr->height; + /* Target compressed field size in bits: */ + size = size * 16; /* uncompressed size in bits */ + /* (Ronald) by default, quality = 100 is a compression + * ratio 1:2. Setting low_bitrate (insmod option) sets + * it to 1:4 (instead of 1:2, zr36060 max) as limit because the + * buz can't handle more at decimation=1... Use low_bitrate if + * you have a Buz, unless you know what you're doing */ + size = size * cap->quality / (low_bitrate ? 400 : 200); + /* Lower limit (arbitrary, 1 KB) */ + if (size < 8192) + size = 8192; + /* Upper limit: 7/8 of the code buffers */ + if (size > ptr->total_code_vol * 7) + size = ptr->total_code_vol * 7; + + ptr->real_code_vol = size >> 3; /* in bytes */ + + /* the MBCVR is the *maximum* block volume, according to the + * JPEG ISO specs, this shouldn't be used, since that allows + * for the best encoding quality. So set it to it's max value */ + reg = ptr->max_block_vol; + zr36060_write(ptr, ZR060_MBCVR, reg); + + return 0; +} + +/* additional control functions */ +static int +zr36060_control (struct videocodec *codec, + int type, + int size, + void *data) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + int *ival = (int *) data; + + dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, + size); + + switch (type) { + case CODEC_G_STATUS: /* get last status */ + if (size != sizeof(int)) + return -EFAULT; + zr36060_read_status(ptr); + *ival = ptr->status; + break; + + case CODEC_G_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + *ival = CODEC_MODE_BJPG; + break; + + case CODEC_S_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + if (*ival != CODEC_MODE_BJPG) + return -EINVAL; + /* not needed, do nothing */ + return 0; + + case CODEC_G_VFE: + case CODEC_S_VFE: + /* not needed, do nothing */ + return 0; + + case CODEC_S_MMAP: + /* not available, give an error */ + return -ENXIO; + + case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + *ival = ptr->total_code_vol; + break; + + case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + ptr->total_code_vol = *ival; + ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; + break; + + case CODEC_G_JPEG_SCALE: /* get scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + *ival = zr36060_read_scalefactor(ptr); + break; + + case CODEC_S_JPEG_SCALE: /* set scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + ptr->scalefact = *ival; + break; + + case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + *app = ptr->app; + break; + } + + case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + ptr->app = *app; + break; + } + + case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + *com = ptr->com; + break; + } + + case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + ptr->com = *com; + break; + } + + default: + return -EINVAL; + } + + return size; +} + +/* ========================================================================= + Exit and unregister function: + + Deinitializes Zoran's JPEG processor + ========================================================================= */ + +static int +zr36060_unset (struct videocodec *codec) +{ + struct zr36060 *ptr = codec->data; + + if (ptr) { + /* do wee need some codec deinit here, too ???? */ + + dprintk(1, "%s: finished codec #%d\n", ptr->name, + ptr->num); + kfree(ptr); + codec->data = NULL; + + zr36060_codecs--; + return 0; + } + + return -EFAULT; +} + +/* ========================================================================= + Setup and registry function: + + Initializes Zoran's JPEG processor + + Also sets pixel size, average code size, mode (compr./decompr.) + (the given size is determined by the processor with the video interface) + ========================================================================= */ + +static int +zr36060_setup (struct videocodec *codec) +{ + struct zr36060 *ptr; + int res; + + dprintk(2, "zr36060: initializing MJPEG subsystem #%d.\n", + zr36060_codecs); + + if (zr36060_codecs == MAX_CODECS) { + dprintk(1, + KERN_ERR "zr36060: Can't attach more codecs!\n"); + return -ENOSPC; + } + //mem structure init + codec->data = ptr = kzalloc(sizeof(struct zr36060), GFP_KERNEL); + if (NULL == ptr) { + dprintk(1, KERN_ERR "zr36060: Can't get enough memory!\n"); + return -ENOMEM; + } + + snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]", + zr36060_codecs); + ptr->num = zr36060_codecs++; + ptr->codec = codec; + + //testing + res = zr36060_basic_test(ptr); + if (res < 0) { + zr36060_unset(codec); + return res; + } + //final setup + memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8); + memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8); + + ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag + * (what is the difference?) */ + ptr->mode = CODEC_DO_COMPRESSION; + ptr->width = 384; + ptr->height = 288; + ptr->total_code_vol = 16000; /* CHECKME */ + ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; + ptr->max_block_vol = 240; /* CHECKME, was 120 is 240 */ + ptr->scalefact = 0x100; + ptr->dri = 1; /* CHECKME, was 8 is 1 */ + + /* by default, no COM or APP markers - app should set those */ + ptr->com.len = 0; + ptr->app.appn = 0; + ptr->app.len = 0; + + zr36060_init(ptr); + + dprintk(1, KERN_INFO "%s: codec attached and running\n", + ptr->name); + + return 0; +} + +static const struct videocodec zr36060_codec = { + .owner = THIS_MODULE, + .name = "zr36060", + .magic = 0L, // magic not used + .flags = + CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | + CODEC_FLAG_DECODER | CODEC_FLAG_VFE, + .type = CODEC_TYPE_ZR36060, + .setup = zr36060_setup, // functionality + .unset = zr36060_unset, + .set_mode = zr36060_set_mode, + .set_video = zr36060_set_video, + .control = zr36060_control, + // others are not used +}; + +/* ========================================================================= + HOOK IN DRIVER AS KERNEL MODULE + ========================================================================= */ + +static int __init +zr36060_init_module (void) +{ + //dprintk(1, "zr36060 driver %s\n",ZR060_VERSION); + zr36060_codecs = 0; + return videocodec_register(&zr36060_codec); +} + +static void __exit +zr36060_cleanup_module (void) +{ + if (zr36060_codecs) { + dprintk(1, + "zr36060: something's wrong - %d codecs left somehow.\n", + zr36060_codecs); + } + + /* however, we can't just stay alive */ + videocodec_unregister(&zr36060_codec); +} + +module_init(zr36060_init_module); +module_exit(zr36060_cleanup_module); + +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_DESCRIPTION("Driver module for ZR36060 jpeg processors " + ZR060_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/zoran/zr36060.h b/drivers/media/pci/zoran/zr36060.h new file mode 100644 index 00000000..914ffa4a --- /dev/null +++ b/drivers/media/pci/zoran/zr36060.h @@ -0,0 +1,220 @@ +/* + * Zoran ZR36060 basic configuration functions - header file + * + * Copyright (C) 2002 Laurent Pinchart + * + * $Id: zr36060.h,v 1.1.1.1.2.3 2003/01/14 21:18:47 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#ifndef ZR36060_H +#define ZR36060_H + +#include "videocodec.h" + +/* data stored for each zoran jpeg codec chip */ +struct zr36060 { + char name[32]; + int num; + /* io datastructure */ + struct videocodec *codec; + // last coder status + __u8 status; + // actual coder setup + int mode; + + __u16 width; + __u16 height; + + __u16 bitrate_ctrl; + + __u32 total_code_vol; + __u32 real_code_vol; + __u16 max_block_vol; + + __u8 h_samp_ratio[8]; + __u8 v_samp_ratio[8]; + __u16 scalefact; + __u16 dri; + + /* app/com marker data */ + struct jpeg_app_marker app; + struct jpeg_com_marker com; +}; + +/* ZR36060 register addresses */ +#define ZR060_LOAD 0x000 +#define ZR060_CFSR 0x001 +#define ZR060_CIR 0x002 +#define ZR060_CMR 0x003 +#define ZR060_MBZ 0x004 +#define ZR060_MBCVR 0x005 +#define ZR060_MER 0x006 +#define ZR060_IMR 0x007 +#define ZR060_ISR 0x008 +#define ZR060_TCV_NET_HI 0x009 +#define ZR060_TCV_NET_MH 0x00a +#define ZR060_TCV_NET_ML 0x00b +#define ZR060_TCV_NET_LO 0x00c +#define ZR060_TCV_DATA_HI 0x00d +#define ZR060_TCV_DATA_MH 0x00e +#define ZR060_TCV_DATA_ML 0x00f +#define ZR060_TCV_DATA_LO 0x010 +#define ZR060_SF_HI 0x011 +#define ZR060_SF_LO 0x012 +#define ZR060_AF_HI 0x013 +#define ZR060_AF_M 0x014 +#define ZR060_AF_LO 0x015 +#define ZR060_ACV_HI 0x016 +#define ZR060_ACV_MH 0x017 +#define ZR060_ACV_ML 0x018 +#define ZR060_ACV_LO 0x019 +#define ZR060_ACT_HI 0x01a +#define ZR060_ACT_MH 0x01b +#define ZR060_ACT_ML 0x01c +#define ZR060_ACT_LO 0x01d +#define ZR060_ACV_TRUN_HI 0x01e +#define ZR060_ACV_TRUN_MH 0x01f +#define ZR060_ACV_TRUN_ML 0x020 +#define ZR060_ACV_TRUN_LO 0x021 +#define ZR060_IDR_DEV 0x022 +#define ZR060_IDR_REV 0x023 +#define ZR060_TCR_HI 0x024 +#define ZR060_TCR_LO 0x025 +#define ZR060_VCR 0x030 +#define ZR060_VPR 0x031 +#define ZR060_SR 0x032 +#define ZR060_BCR_Y 0x033 +#define ZR060_BCR_U 0x034 +#define ZR060_BCR_V 0x035 +#define ZR060_SGR_VTOTAL_HI 0x036 +#define ZR060_SGR_VTOTAL_LO 0x037 +#define ZR060_SGR_HTOTAL_HI 0x038 +#define ZR060_SGR_HTOTAL_LO 0x039 +#define ZR060_SGR_VSYNC 0x03a +#define ZR060_SGR_HSYNC 0x03b +#define ZR060_SGR_BVSTART 0x03c +#define ZR060_SGR_BHSTART 0x03d +#define ZR060_SGR_BVEND_HI 0x03e +#define ZR060_SGR_BVEND_LO 0x03f +#define ZR060_SGR_BHEND_HI 0x040 +#define ZR060_SGR_BHEND_LO 0x041 +#define ZR060_AAR_VSTART_HI 0x042 +#define ZR060_AAR_VSTART_LO 0x043 +#define ZR060_AAR_VEND_HI 0x044 +#define ZR060_AAR_VEND_LO 0x045 +#define ZR060_AAR_HSTART_HI 0x046 +#define ZR060_AAR_HSTART_LO 0x047 +#define ZR060_AAR_HEND_HI 0x048 +#define ZR060_AAR_HEND_LO 0x049 +#define ZR060_SWR_VSTART_HI 0x04a +#define ZR060_SWR_VSTART_LO 0x04b +#define ZR060_SWR_VEND_HI 0x04c +#define ZR060_SWR_VEND_LO 0x04d +#define ZR060_SWR_HSTART_HI 0x04e +#define ZR060_SWR_HSTART_LO 0x04f +#define ZR060_SWR_HEND_HI 0x050 +#define ZR060_SWR_HEND_LO 0x051 + +#define ZR060_SOF_IDX 0x060 +#define ZR060_SOS_IDX 0x07a +#define ZR060_DRI_IDX 0x0c0 +#define ZR060_DQT_IDX 0x0cc +#define ZR060_DHT_IDX 0x1d4 +#define ZR060_APP_IDX 0x380 +#define ZR060_COM_IDX 0x3c0 + +/* ZR36060 LOAD register bits */ + +#define ZR060_LOAD_Load (1 << 7) +#define ZR060_LOAD_SyncRst (1 << 0) + +/* ZR36060 Code FIFO Status register bits */ + +#define ZR060_CFSR_Busy (1 << 7) +#define ZR060_CFSR_CBusy (1 << 2) +#define ZR060_CFSR_CFIFO (3 << 0) + +/* ZR36060 Code Interface register */ + +#define ZR060_CIR_Code16 (1 << 7) +#define ZR060_CIR_Endian (1 << 6) +#define ZR060_CIR_CFIS (1 << 2) +#define ZR060_CIR_CodeMstr (1 << 0) + +/* ZR36060 Codec Mode register */ + +#define ZR060_CMR_Comp (1 << 7) +#define ZR060_CMR_ATP (1 << 6) +#define ZR060_CMR_Pass2 (1 << 5) +#define ZR060_CMR_TLM (1 << 4) +#define ZR060_CMR_BRB (1 << 2) +#define ZR060_CMR_FSF (1 << 1) + +/* ZR36060 Markers Enable register */ + +#define ZR060_MER_App (1 << 7) +#define ZR060_MER_Com (1 << 6) +#define ZR060_MER_DRI (1 << 5) +#define ZR060_MER_DQT (1 << 4) +#define ZR060_MER_DHT (1 << 3) + +/* ZR36060 Interrupt Mask register */ + +#define ZR060_IMR_EOAV (1 << 3) +#define ZR060_IMR_EOI (1 << 2) +#define ZR060_IMR_End (1 << 1) +#define ZR060_IMR_DataErr (1 << 0) + +/* ZR36060 Interrupt Status register */ + +#define ZR060_ISR_ProCnt (3 << 6) +#define ZR060_ISR_EOAV (1 << 3) +#define ZR060_ISR_EOI (1 << 2) +#define ZR060_ISR_End (1 << 1) +#define ZR060_ISR_DataErr (1 << 0) + +/* ZR36060 Video Control register */ + +#define ZR060_VCR_Video8 (1 << 7) +#define ZR060_VCR_Range (1 << 6) +#define ZR060_VCR_FIDet (1 << 3) +#define ZR060_VCR_FIVedge (1 << 2) +#define ZR060_VCR_FIExt (1 << 1) +#define ZR060_VCR_SyncMstr (1 << 0) + +/* ZR36060 Video Polarity register */ + +#define ZR060_VPR_VCLKPol (1 << 7) +#define ZR060_VPR_PValPol (1 << 6) +#define ZR060_VPR_PoePol (1 << 5) +#define ZR060_VPR_SImgPol (1 << 4) +#define ZR060_VPR_BLPol (1 << 3) +#define ZR060_VPR_FIPol (1 << 2) +#define ZR060_VPR_HSPol (1 << 1) +#define ZR060_VPR_VSPol (1 << 0) + +/* ZR36060 Scaling register */ + +#define ZR060_SR_VScale (1 << 2) +#define ZR060_SR_HScale2 (1 << 0) +#define ZR060_SR_HScale4 (2 << 0) + +#endif /*fndef ZR36060_H */ diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig new file mode 100644 index 00000000..0494d276 --- /dev/null +++ b/drivers/media/platform/Kconfig @@ -0,0 +1,243 @@ +# +# Platform drivers +# All drivers here are currently for webcam support + +menuconfig V4L_PLATFORM_DRIVERS + bool "V4L platform devices" + depends on MEDIA_CAMERA_SUPPORT + default n + ---help--- + Say Y here to enable support for platform-specific V4L drivers. + +if V4L_PLATFORM_DRIVERS + +source "drivers/media/platform/marvell-ccic/Kconfig" + +config VIDEO_VIA_CAMERA + tristate "VIAFB camera controller support" + depends on FB_VIA + select VIDEOBUF_DMA_SG + select VIDEO_OV7670 + help + Driver support for the integrated camera controller in VIA + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems + with ov7670 sensors. + +# +# Platform multimedia device configuration +# + +source "drivers/media/platform/davinci/Kconfig" + +source "drivers/media/platform/omap/Kconfig" + +source "drivers/media/platform/blackfin/Kconfig" + +config VIDEO_SH_VOU + tristate "SuperH VOU video output driver" + depends on MEDIA_CAMERA_SUPPORT + depends on VIDEO_DEV && ARCH_SHMOBILE + select VIDEOBUF_DMA_CONTIG + help + Support for the Video Output Unit (VOU) on SuperH SoCs. + +config VIDEO_VIU + tristate "Freescale VIU Video Driver" + depends on VIDEO_V4L2 && PPC_MPC512x + select VIDEOBUF_DMA_CONTIG + default y + ---help--- + Support for Freescale VIU video driver. This device captures + video data, or overlays video on DIU frame buffer. + + Say Y here if you want to enable VIU device on MPC5121e Rev2+. + In doubt, say N. + +config VIDEO_TIMBERDALE + tristate "Support for timberdale Video In/LogiWIN" + depends on VIDEO_V4L2 && I2C && DMADEVICES + select DMA_ENGINE + select TIMB_DMA + select VIDEO_ADV7180 + select VIDEOBUF_DMA_CONTIG + ---help--- + Add support for the Video In peripherial of the timberdale FPGA. + +config VIDEO_VINO + tristate "SGI Vino Video For Linux" + depends on I2C && SGI_IP22 && VIDEO_V4L2 + select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to build in support for the Vino video input system found + on SGI Indy machines. + +config VIDEO_M32R_AR + tristate "AR devices" + depends on M32R && VIDEO_V4L2 + ---help--- + This is a video4linux driver for the Renesas AR (Artificial Retina) + camera module. + +config VIDEO_M32R_AR_M64278 + tristate "AR device with color module M64278(VGA)" + depends on PLAT_M32700UT + select VIDEO_M32R_AR + ---help--- + This is a video4linux driver for the Renesas AR (Artificial + Retina) with M64278E-800 camera module. + This module supports VGA(640x480 pixels) resolutions. + + To compile this driver as a module, choose M here: the + module will be called arv. + +config VIDEO_OMAP2 + tristate "OMAP2 Camera Capture Interface driver" + depends on VIDEO_DEV && ARCH_OMAP2 && VIDEO_V4L2_INT_DEVICE + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the TI OMAP2 camera capture interface + +config VIDEO_OMAP3 + tristate "OMAP 3 Camera support" + depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 + ---help--- + Driver for an OMAP 3 camera controller. + +config VIDEO_OMAP3_DEBUG + bool "OMAP 3 Camera debug messages" + depends on VIDEO_OMAP3 + ---help--- + Enable debug messages on OMAP 3 camera controller driver. + +config VIDEO_S3C_CAMIF + tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + depends on (PLAT_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME + select VIDEOBUF2_DMA_CONTIG + ---help--- + This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera + host interface (CAMIF). + + To compile this driver as a module, choose M here: the module + will be called s3c-camif. + +source "drivers/media/platform/soc_camera/Kconfig" +source "drivers/media/platform/exynos4-is/Kconfig" +source "drivers/media/platform/s5p-tv/Kconfig" + +endif # V4L_PLATFORM_DRIVERS + +menuconfig V4L_MEM2MEM_DRIVERS + bool "Memory-to-memory multimedia devices" + depends on VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + default n + ---help--- + Say Y here to enable selecting drivers for V4L devices that + use system memory for both source and destination buffers, as opposed + to capture and output drivers, which use memory buffers for just + one of those. + +if V4L_MEM2MEM_DRIVERS + +config VIDEO_CODA + tristate "Chips&Media Coda multi-standard codec IP" + depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + Coda is a range of video codec IPs that supports + H.264, MPEG-4, and other video formats. + +config VIDEO_MEM2MEM_DEINTERLACE + tristate "Deinterlace support" + depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + Generic deinterlacing V4L2 driver. + +config VIDEO_SAMSUNG_S5P_G2D + tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D + 2d graphics accelerator. + +config VIDEO_SAMSUNG_S5P_JPEG + tristate "Samsung S5P/Exynos4 JPEG codec driver" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec + +config VIDEO_SAMSUNG_S5P_MFC + tristate "Samsung S5P MFC Video Codec" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + default n + help + MFC 5.1 and 6.x driver for V4L2 + +config VIDEO_MX2_EMMAPRP + tristate "MX2 eMMa-PrP support" + depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27 + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + MX2X chips have a PrP that can be used to process buffers from + memory to memory. Operations include resizing and format + conversion. + +config VIDEO_SAMSUNG_EXYNOS_GSC + tristate "Samsung Exynos G-Scaler driver" + depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_EXYNOS5 + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. + +config VIDEO_SH_VEU + tristate "SuperH VEU mem2mem video processing driver" + depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + Support for the Video Engine Unit (VEU) on SuperH and + SH-Mobile SoCs. + +endif # V4L_MEM2MEM_DRIVERS + +menuconfig V4L_TEST_DRIVERS + bool "Media test drivers" + depends on MEDIA_CAMERA_SUPPORT + +if V4L_TEST_DRIVERS +config VIDEO_VIVI + tristate "Virtual Video Driver" + depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE + select FONT_8x16 + select VIDEOBUF2_VMALLOC + default n + ---help--- + Enables a virtual video driver. This device shows a color bar + and a timestamp, as a real device would generate by using V4L2 + api. + Say Y here if you want to test video apps or debug V4L devices. + In doubt, say N. + +config VIDEO_MEM2MEM_TESTDEV + tristate "Virtual test device for mem2mem framework" + depends on VIDEO_DEV && VIDEO_V4L2 + select VIDEOBUF2_VMALLOC + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a virtual test device for the memory-to-memory driver + framework. +endif #V4L_TEST_DRIVERS diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile new file mode 100644 index 00000000..eee28dd7 --- /dev/null +++ b/drivers/media/platform/Makefile @@ -0,0 +1,53 @@ +# +# Makefile for the video capture/playback device drivers. +# + +omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o + +obj-$(CONFIG_VIDEO_VINO) += indycam.o +obj-$(CONFIG_VIDEO_VINO) += vino.o + +obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o +obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o + +obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o +obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/ +obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ + +obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o +obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/ + +obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o +obj-$(CONFIG_VIDEO_VIVI) += vivi.o + +obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o + +obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o +obj-$(CONFIG_VIDEO_CODA) += coda.o + +obj-$(CONFIG_VIDEO_SH_VEU) += sh_veu.o + +obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE) += m2m-deinterlace.o + +obj-$(CONFIG_VIDEO_S3C_CAMIF) += s3c-camif/ +obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS) += exynos4-is/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/ + +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/ +obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/ + +obj-$(CONFIG_BLACKFIN) += blackfin/ + +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ + +obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o + +obj-$(CONFIG_SOC_CAMERA) += soc_camera/ + +obj-y += davinci/ + +obj-$(CONFIG_ARCH_OMAP) += omap/ + +ccflags-y += -I$(srctree)/drivers/media/i2c diff --git a/drivers/media/platform/arv.c b/drivers/media/platform/arv.c new file mode 100644 index 00000000..e346d32d --- /dev/null +++ b/drivers/media/platform/arv.c @@ -0,0 +1,885 @@ +/* + * Colour AR M64278(VGA) driver for Video4Linux + * + * Copyright (C) 2003 Takeo Takahashi + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Some code is taken from AR driver sample program for M3T-M32700UT. + * + * AR driver sample (M32R SDK): + * Copyright (c) 2003 RENESAS TECHNOROGY CORPORATION + * AND RENESAS SOLUTIONS CORPORATION + * All Rights Reserved. + * + * 2003-09-01: Support w3cam by Takeo Takahashi + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#if 0 +#define DEBUG(n, args...) printk(KERN_INFO args) +#define CHECK_LOST 1 +#else +#define DEBUG(n, args...) +#define CHECK_LOST 0 +#endif + +/* + * USE_INT is always 0, interrupt mode is not available + * on linux due to lack of speed + */ +#define USE_INT 0 /* Don't modify */ + +#define VERSION "0.0.5" + +#define ar_inl(addr) inl((unsigned long)(addr)) +#define ar_outl(val, addr) outl((unsigned long)(val), (unsigned long)(addr)) + +extern struct cpuinfo_m32r boot_cpu_data; + +/* + * CCD pixel size + * Note that M32700UT does not support CIF mode, but QVGA is + * supported by M32700UT hardware using VGA mode of AR LSI. + * + * Supported: VGA (Normal mode, Interlace mode) + * QVGA (Always Interlace mode of VGA) + * + */ +#define AR_WIDTH_VGA 640 +#define AR_HEIGHT_VGA 480 +#define AR_WIDTH_QVGA 320 +#define AR_HEIGHT_QVGA 240 +#define MIN_AR_WIDTH AR_WIDTH_QVGA +#define MIN_AR_HEIGHT AR_HEIGHT_QVGA +#define MAX_AR_WIDTH AR_WIDTH_VGA +#define MAX_AR_HEIGHT AR_HEIGHT_VGA + +/* bits & bytes per pixel */ +#define AR_BITS_PER_PIXEL 16 +#define AR_BYTES_PER_PIXEL (AR_BITS_PER_PIXEL / 8) + +/* line buffer size */ +#define AR_LINE_BYTES_VGA (AR_WIDTH_VGA * AR_BYTES_PER_PIXEL) +#define AR_LINE_BYTES_QVGA (AR_WIDTH_QVGA * AR_BYTES_PER_PIXEL) +#define MAX_AR_LINE_BYTES AR_LINE_BYTES_VGA + +/* frame size & type */ +#define AR_FRAME_BYTES_VGA \ + (AR_WIDTH_VGA * AR_HEIGHT_VGA * AR_BYTES_PER_PIXEL) +#define AR_FRAME_BYTES_QVGA \ + (AR_WIDTH_QVGA * AR_HEIGHT_QVGA * AR_BYTES_PER_PIXEL) +#define MAX_AR_FRAME_BYTES \ + (MAX_AR_WIDTH * MAX_AR_HEIGHT * AR_BYTES_PER_PIXEL) + +#define AR_MAX_FRAME 15 + +/* capture size */ +#define AR_SIZE_VGA 0 +#define AR_SIZE_QVGA 1 + +/* capture mode */ +#define AR_MODE_INTERLACE 0 +#define AR_MODE_NORMAL 1 + +struct ar { + struct v4l2_device v4l2_dev; + struct video_device vdev; + unsigned int start_capture; /* duaring capture in INT. mode. */ +#if USE_INT + unsigned char *line_buff; /* DMA line buffer */ +#endif + unsigned char *frame[MAX_AR_HEIGHT]; /* frame data */ + short size; /* capture size */ + short mode; /* capture mode */ + int width, height; + int frame_bytes, line_bytes; + wait_queue_head_t wait; + struct mutex lock; +}; + +static struct ar ardev; + +static int video_nr = -1; /* video device number (first free) */ +static unsigned char yuv[MAX_AR_FRAME_BYTES]; + +/* module parameters */ +/* default frequency */ +#define DEFAULT_FREQ 50 /* 50 or 75 (MHz) is available as BCLK */ +static int freq = DEFAULT_FREQ; /* BCLK: available 50 or 70 (MHz) */ +static int vga; /* default mode(0:QVGA mode, other:VGA mode) */ +static int vga_interlace; /* 0 is normal mode for, else interlace mode */ +module_param(freq, int, 0); +module_param(vga, int, 0); +module_param(vga_interlace, int, 0); + +static void wait_for_vsync(void) +{ + while (ar_inl(ARVCR0) & ARVCR0_VDS) /* wait for VSYNC */ + cpu_relax(); + while (!(ar_inl(ARVCR0) & ARVCR0_VDS)) /* wait for VSYNC */ + cpu_relax(); +} + +static void wait_acknowledge(void) +{ + int i; + + for (i = 0; i < 1000; i++) + cpu_relax(); + while (ar_inl(PLDI2CSTS) & PLDI2CSTS_NOACK) + cpu_relax(); +} + +/******************************************************************* + * I2C functions + *******************************************************************/ +static void iic(int n, unsigned long addr, unsigned long data1, unsigned long data2, + unsigned long data3) +{ + int i; + + /* Slave Address */ + ar_outl(addr, PLDI2CDATA); + wait_for_vsync(); + + /* Start */ + ar_outl(1, PLDI2CCND); + wait_acknowledge(); + + /* Transfer data 1 */ + ar_outl(data1, PLDI2CDATA); + wait_for_vsync(); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + wait_acknowledge(); + + /* Transfer data 2 */ + ar_outl(data2, PLDI2CDATA); + wait_for_vsync(); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + wait_acknowledge(); + + if (n == 3) { + /* Transfer data 3 */ + ar_outl(data3, PLDI2CDATA); + wait_for_vsync(); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + wait_acknowledge(); + } + + /* Stop */ + for (i = 0; i < 100; i++) + cpu_relax(); + ar_outl(2, PLDI2CCND); + ar_outl(2, PLDI2CCND); + + while (ar_inl(PLDI2CSTS) & PLDI2CSTS_BB) + cpu_relax(); +} + + +static void init_iic(void) +{ + DEBUG(1, "init_iic:\n"); + + /* + * ICU Setting (iic) + */ + /* I2C Setting */ + ar_outl(0x0, PLDI2CCR); /* I2CCR Disable */ + ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */ + ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */ + + /* I2C CLK */ + /* 50MH-100k */ + if (freq == 75) + ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */ + else if (freq == 50) + ar_outl(244, PLDI2CFREQ); /* BCLK = 50MHz */ + else + ar_outl(244, PLDI2CFREQ); /* default: BCLK = 50MHz */ + ar_outl(0x1, PLDI2CCR); /* I2CCR Enable */ +} + +/************************************************************************** + * + * Video4Linux Interface functions + * + **************************************************************************/ + +static inline void disable_dma(void) +{ + ar_outl(0x8000, M32R_DMAEN_PORTL); /* disable DMA0 */ +} + +static inline void enable_dma(void) +{ + ar_outl(0x8080, M32R_DMAEN_PORTL); /* enable DMA0 */ +} + +static inline void clear_dma_status(void) +{ + ar_outl(0x8000, M32R_DMAEDET_PORTL); /* clear status */ +} + +static void wait_for_vertical_sync(struct ar *ar, int exp_line) +{ +#if CHECK_LOST + int tmout = 10000; /* FIXME */ + int l; + + /* + * check HCOUNT because we cannot check vertical sync. + */ + for (; tmout >= 0; tmout--) { + l = ar_inl(ARVHCOUNT); + if (l == exp_line) + break; + } + if (tmout < 0) + v4l2_err(&ar->v4l2_dev, "lost %d -> %d\n", exp_line, l); +#else + while (ar_inl(ARVHCOUNT) != exp_line) + cpu_relax(); +#endif +} + +static ssize_t ar_read(struct file *file, char *buf, size_t count, loff_t *ppos) +{ + struct ar *ar = video_drvdata(file); + long ret = ar->frame_bytes; /* return read bytes */ + unsigned long arvcr1 = 0; + unsigned long flags; + unsigned char *p; + int h, w; + unsigned char *py, *pu, *pv; +#if !USE_INT + int l; +#endif + + DEBUG(1, "ar_read()\n"); + + if (ar->size == AR_SIZE_QVGA) + arvcr1 |= ARVCR1_QVGA; + if (ar->mode == AR_MODE_NORMAL) + arvcr1 |= ARVCR1_NORMAL; + + mutex_lock(&ar->lock); + +#if USE_INT + local_irq_save(flags); + disable_dma(); + ar_outl(0xa1871300, M32R_DMA0CR0_PORTL); + ar_outl(0x01000000, M32R_DMA0CR1_PORTL); + + /* set AR FIFO address as source(BSEL5) */ + ar_outl(ARDATA32, M32R_DMA0CSA_PORTL); + ar_outl(ARDATA32, M32R_DMA0RSA_PORTL); + ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* destination addr. */ + ar_outl(ar->line_buff, M32R_DMA0RDA_PORTL); /* reload address */ + ar_outl(ar->line_bytes, M32R_DMA0CBCUT_PORTL); /* byte count (bytes) */ + ar_outl(ar->line_bytes, M32R_DMA0RBCUT_PORTL); /* reload count (bytes) */ + + /* + * Okay, kick AR LSI to invoke an interrupt + */ + ar->start_capture = 0; + ar_outl(arvcr1 | ARVCR1_HIEN, ARVCR1); + local_irq_restore(flags); + /* .... AR interrupts .... */ + interruptible_sleep_on(&ar->wait); + if (signal_pending(current)) { + printk(KERN_ERR "arv: interrupted while get frame data.\n"); + ret = -EINTR; + goto out_up; + } +#else /* ! USE_INT */ + /* polling */ + ar_outl(arvcr1, ARVCR1); + disable_dma(); + ar_outl(0x8000, M32R_DMAEDET_PORTL); + ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); + ar_outl(0x01000000, M32R_DMA0CR1_PORTL); + ar_outl(ARDATA32, M32R_DMA0CSA_PORTL); + ar_outl(ARDATA32, M32R_DMA0RSA_PORTL); + ar_outl(ar->line_bytes, M32R_DMA0CBCUT_PORTL); + ar_outl(ar->line_bytes, M32R_DMA0RBCUT_PORTL); + + local_irq_save(flags); + while (ar_inl(ARVHCOUNT) != 0) /* wait for 0 */ + cpu_relax(); + if (ar->mode == AR_MODE_INTERLACE && ar->size == AR_SIZE_VGA) { + for (h = 0; h < ar->height; h++) { + wait_for_vertical_sync(ar, h); + if (h < (AR_HEIGHT_VGA/2)) + l = h << 1; + else + l = (((h - (AR_HEIGHT_VGA/2)) << 1) + 1); + ar_outl(virt_to_phys(ar->frame[l]), M32R_DMA0CDA_PORTL); + enable_dma(); + while (!(ar_inl(M32R_DMAEDET_PORTL) & 0x8000)) + cpu_relax(); + disable_dma(); + clear_dma_status(); + ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); + } + } else { + for (h = 0; h < ar->height; h++) { + wait_for_vertical_sync(ar, h); + ar_outl(virt_to_phys(ar->frame[h]), M32R_DMA0CDA_PORTL); + enable_dma(); + while (!(ar_inl(M32R_DMAEDET_PORTL) & 0x8000)) + cpu_relax(); + disable_dma(); + clear_dma_status(); + ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); + } + } + local_irq_restore(flags); +#endif /* ! USE_INT */ + + /* + * convert YUV422 to YUV422P + * +--------------------+ + * | Y0,Y1,... | + * | ..............Yn | + * +--------------------+ + * | U0,U1,........Un | + * +--------------------+ + * | V0,V1,........Vn | + * +--------------------+ + */ + py = yuv; + pu = py + (ar->frame_bytes / 2); + pv = pu + (ar->frame_bytes / 4); + for (h = 0; h < ar->height; h++) { + p = ar->frame[h]; + for (w = 0; w < ar->line_bytes; w += 4) { + *py++ = *p++; + *pu++ = *p++; + *py++ = *p++; + *pv++ = *p++; + } + } + if (copy_to_user(buf, yuv, ar->frame_bytes)) { + v4l2_err(&ar->v4l2_dev, "failed while copy_to_user yuv.\n"); + ret = -EFAULT; + goto out_up; + } + DEBUG(1, "ret = %d\n", ret); +out_up: + mutex_unlock(&ar->lock); + return ret; +} + +static int ar_querycap(struct file *file, void *priv, + struct v4l2_capability *vcap) +{ + struct ar *ar = video_drvdata(file); + + strlcpy(vcap->driver, ar->vdev.name, sizeof(vcap->driver)); + strlcpy(vcap->card, "Colour AR VGA", sizeof(vcap->card)); + strlcpy(vcap->bus_info, "Platform", sizeof(vcap->bus_info)); + vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; + vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int ar_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + if (vin->index > 0) + return -EINVAL; + strlcpy(vin->name, "Camera", sizeof(vin->name)); + vin->type = V4L2_INPUT_TYPE_CAMERA; + vin->audioset = 0; + vin->tuner = 0; + vin->std = V4L2_STD_ALL; + vin->status = 0; + return 0; +} + +static int ar_g_input(struct file *file, void *fh, unsigned int *inp) +{ + *inp = 0; + return 0; +} + +static int ar_s_input(struct file *file, void *fh, unsigned int inp) +{ + return inp ? -EINVAL : 0; +} + +static int ar_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ar *ar = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + pix->width = ar->width; + pix->height = ar->height; + pix->pixelformat = V4L2_PIX_FMT_YUV422P; + pix->field = (ar->mode == AR_MODE_NORMAL) ? V4L2_FIELD_NONE : V4L2_FIELD_INTERLACED; + pix->bytesperline = ar->width; + pix->sizeimage = 2 * ar->width * ar->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int ar_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ar *ar = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->height <= AR_HEIGHT_QVGA || pix->width <= AR_WIDTH_QVGA) { + pix->height = AR_HEIGHT_QVGA; + pix->width = AR_WIDTH_QVGA; + pix->field = V4L2_FIELD_INTERLACED; + } else { + pix->height = AR_HEIGHT_VGA; + pix->width = AR_WIDTH_VGA; + pix->field = vga_interlace ? V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE; + } + pix->pixelformat = V4L2_PIX_FMT_YUV422P; + pix->bytesperline = ar->width; + pix->sizeimage = 2 * ar->width * ar->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int ar_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ar *ar = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + int ret = ar_try_fmt_vid_cap(file, fh, fmt); + + if (ret) + return ret; + mutex_lock(&ar->lock); + ar->width = pix->width; + ar->height = pix->height; + if (ar->width == AR_WIDTH_VGA) { + ar->size = AR_SIZE_VGA; + ar->frame_bytes = AR_FRAME_BYTES_VGA; + ar->line_bytes = AR_LINE_BYTES_VGA; + if (vga_interlace) + ar->mode = AR_MODE_INTERLACE; + else + ar->mode = AR_MODE_NORMAL; + } else { + ar->size = AR_SIZE_QVGA; + ar->frame_bytes = AR_FRAME_BYTES_QVGA; + ar->line_bytes = AR_LINE_BYTES_QVGA; + ar->mode = AR_MODE_INTERLACE; + } + /* Ok we figured out what to use from our wide choice */ + mutex_unlock(&ar->lock); + return 0; +} + +static int ar_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "YUV 4:2:2 Planar", V4L2_PIX_FMT_YUV422P, + { 0, 0, 0, 0 } + }, + }; + enum v4l2_buf_type type = fmt->type; + + if (fmt->index > 0) + return -EINVAL; + + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; +} + +#if USE_INT +/* + * Interrupt handler + */ +static void ar_interrupt(int irq, void *dev) +{ + struct ar *ar = dev; + unsigned int line_count; + unsigned int line_number; + unsigned int arvcr1; + + line_count = ar_inl(ARVHCOUNT); /* line number */ + if (ar->mode == AR_MODE_INTERLACE && ar->size == AR_SIZE_VGA) { + /* operations for interlace mode */ + if (line_count < (AR_HEIGHT_VGA / 2)) /* even line */ + line_number = (line_count << 1); + else /* odd line */ + line_number = + (((line_count - (AR_HEIGHT_VGA / 2)) << 1) + 1); + } else { + line_number = line_count; + } + + if (line_number == 0) { + /* + * It is an interrupt for line 0. + * we have to start capture. + */ + disable_dma(); +#if 0 + ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* needless? */ +#endif + memcpy(ar->frame[0], ar->line_buff, ar->line_bytes); +#if 0 + ar_outl(0xa1861300, M32R_DMA0CR0_PORTL); +#endif + enable_dma(); + ar->start_capture = 1; /* during capture */ + return; + } + + if (ar->start_capture == 1 && line_number <= (ar->height - 1)) { + disable_dma(); + memcpy(ar->frame[line_number], ar->line_buff, ar->line_bytes); + + /* + * if captured all line of a frame, disable AR interrupt + * and wake a process up. + */ + if (line_number == (ar->height - 1)) { /* end of line */ + + ar->start_capture = 0; + + /* disable AR interrupt request */ + arvcr1 = ar_inl(ARVCR1); + arvcr1 &= ~ARVCR1_HIEN; /* clear int. flag */ + ar_outl(arvcr1, ARVCR1); /* disable */ + wake_up_interruptible(&ar->wait); + } else { +#if 0 + ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); + ar_outl(0xa1861300, M32R_DMA0CR0_PORTL); +#endif + enable_dma(); + } + } +} +#endif + +/* + * ar_initialize() + * ar_initialize() is called by video_register_device() and + * initializes AR LSI and peripherals. + * + * -1 is returned in all failures. + * 0 is returned in success. + * + */ +static int ar_initialize(struct ar *ar) +{ + unsigned long cr = 0; + int i, found = 0; + + DEBUG(1, "ar_initialize:\n"); + + /* + * initialize AR LSI + */ + ar_outl(0, ARVCR0); /* assert reset of AR LSI */ + for (i = 0; i < 0x18; i++) /* wait for over 10 cycles @ 27MHz */ + cpu_relax(); + ar_outl(ARVCR0_RST, ARVCR0); /* negate reset of AR LSI (enable) */ + for (i = 0; i < 0x40d; i++) /* wait for over 420 cycles @ 27MHz */ + cpu_relax(); + + /* AR uses INT3 of CPU as interrupt pin. */ + ar_outl(ARINTSEL_INT3, ARINTSEL); + + if (ar->size == AR_SIZE_QVGA) + cr |= ARVCR1_QVGA; + if (ar->mode == AR_MODE_NORMAL) + cr |= ARVCR1_NORMAL; + ar_outl(cr, ARVCR1); + + /* + * Initialize IIC so that CPU can communicate with AR LSI, + * and send boot commands to AR LSI. + */ + init_iic(); + + for (i = 0; i < 0x100000; i++) { /* > 0xa1d10, 56ms */ + if ((ar_inl(ARVCR0) & ARVCR0_VDS)) { /* VSYNC */ + found = 1; + break; + } + } + + if (found == 0) + return -ENODEV; + + v4l2_info(&ar->v4l2_dev, "Initializing "); + + iic(2, 0x78, 0x11, 0x01, 0x00); /* start */ + iic(3, 0x78, 0x12, 0x00, 0x06); + iic(3, 0x78, 0x12, 0x12, 0x30); + iic(3, 0x78, 0x12, 0x15, 0x58); + iic(3, 0x78, 0x12, 0x17, 0x30); + printk(KERN_CONT "."); + iic(3, 0x78, 0x12, 0x1a, 0x97); + iic(3, 0x78, 0x12, 0x1b, 0xff); + iic(3, 0x78, 0x12, 0x1c, 0xff); + iic(3, 0x78, 0x12, 0x26, 0x10); + iic(3, 0x78, 0x12, 0x27, 0x00); + printk(KERN_CONT "."); + iic(2, 0x78, 0x34, 0x02, 0x00); + iic(2, 0x78, 0x7a, 0x10, 0x00); + iic(2, 0x78, 0x80, 0x39, 0x00); + iic(2, 0x78, 0x81, 0xe6, 0x00); + iic(2, 0x78, 0x8d, 0x00, 0x00); + printk(KERN_CONT "."); + iic(2, 0x78, 0x8e, 0x0c, 0x00); + iic(2, 0x78, 0x8f, 0x00, 0x00); +#if 0 + iic(2, 0x78, 0x90, 0x00, 0x00); /* AWB on=1 off=0 */ +#endif + iic(2, 0x78, 0x93, 0x01, 0x00); + iic(2, 0x78, 0x94, 0xcd, 0x00); + iic(2, 0x78, 0x95, 0x00, 0x00); + printk(KERN_CONT "."); + iic(2, 0x78, 0x96, 0xa0, 0x00); + iic(2, 0x78, 0x97, 0x00, 0x00); + iic(2, 0x78, 0x98, 0x60, 0x00); + iic(2, 0x78, 0x99, 0x01, 0x00); + iic(2, 0x78, 0x9a, 0x19, 0x00); + printk(KERN_CONT "."); + iic(2, 0x78, 0x9b, 0x02, 0x00); + iic(2, 0x78, 0x9c, 0xe8, 0x00); + iic(2, 0x78, 0x9d, 0x02, 0x00); + iic(2, 0x78, 0x9e, 0x2e, 0x00); + iic(2, 0x78, 0xb8, 0x78, 0x00); + iic(2, 0x78, 0xba, 0x05, 0x00); +#if 0 + iic(2, 0x78, 0x83, 0x8c, 0x00); /* brightness */ +#endif + printk(KERN_CONT "."); + + /* color correction */ + iic(3, 0x78, 0x49, 0x00, 0x95); /* a */ + iic(3, 0x78, 0x49, 0x01, 0x96); /* b */ + iic(3, 0x78, 0x49, 0x03, 0x85); /* c */ + iic(3, 0x78, 0x49, 0x04, 0x97); /* d */ + iic(3, 0x78, 0x49, 0x02, 0x7e); /* e(Lo) */ + iic(3, 0x78, 0x49, 0x05, 0xa4); /* f(Lo) */ + iic(3, 0x78, 0x49, 0x06, 0x04); /* e(Hi) */ + iic(3, 0x78, 0x49, 0x07, 0x04); /* e(Hi) */ + iic(2, 0x78, 0x48, 0x01, 0x00); /* on=1 off=0 */ + + printk(KERN_CONT "."); + iic(2, 0x78, 0x11, 0x00, 0x00); /* end */ + printk(KERN_CONT " done\n"); + return 0; +} + + +/**************************************************************************** + * + * Video4Linux Module functions + * + ****************************************************************************/ + +static const struct v4l2_file_operations ar_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .read = ar_read, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops ar_ioctl_ops = { + .vidioc_querycap = ar_querycap, + .vidioc_g_input = ar_g_input, + .vidioc_s_input = ar_s_input, + .vidioc_enum_input = ar_enum_input, + .vidioc_enum_fmt_vid_cap = ar_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = ar_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = ar_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = ar_try_fmt_vid_cap, +}; + +#define ALIGN4(x) ((((int)(x)) & 0x3) == 0) + +static int __init ar_init(void) +{ + struct ar *ar; + struct v4l2_device *v4l2_dev; + int ret; + int i; + + ar = &ardev; + v4l2_dev = &ar->v4l2_dev; + strlcpy(v4l2_dev->name, "arv", sizeof(v4l2_dev->name)); + v4l2_info(v4l2_dev, "Colour AR VGA driver %s\n", VERSION); + + ret = v4l2_device_register(NULL, v4l2_dev); + if (ret < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + return ret; + } + ret = -EIO; + +#if USE_INT + /* allocate a DMA buffer for 1 line. */ + ar->line_buff = kmalloc(MAX_AR_LINE_BYTES, GFP_KERNEL | GFP_DMA); + if (ar->line_buff == NULL || !ALIGN4(ar->line_buff)) { + v4l2_err(v4l2_dev, "buffer allocation failed for DMA.\n"); + ret = -ENOMEM; + goto out_end; + } +#endif + /* allocate buffers for a frame */ + for (i = 0; i < MAX_AR_HEIGHT; i++) { + ar->frame[i] = kmalloc(MAX_AR_LINE_BYTES, GFP_KERNEL); + if (ar->frame[i] == NULL || !ALIGN4(ar->frame[i])) { + v4l2_err(v4l2_dev, "buffer allocation failed for frame.\n"); + ret = -ENOMEM; + goto out_line_buff; + } + } + + strlcpy(ar->vdev.name, "Colour AR VGA", sizeof(ar->vdev.name)); + ar->vdev.v4l2_dev = v4l2_dev; + ar->vdev.fops = &ar_fops; + ar->vdev.ioctl_ops = &ar_ioctl_ops; + ar->vdev.release = video_device_release_empty; + set_bit(V4L2_FL_USE_FH_PRIO, &ar->vdev.flags); + video_set_drvdata(&ar->vdev, ar); + + if (vga) { + ar->width = AR_WIDTH_VGA; + ar->height = AR_HEIGHT_VGA; + ar->size = AR_SIZE_VGA; + ar->frame_bytes = AR_FRAME_BYTES_VGA; + ar->line_bytes = AR_LINE_BYTES_VGA; + if (vga_interlace) + ar->mode = AR_MODE_INTERLACE; + else + ar->mode = AR_MODE_NORMAL; + } else { + ar->width = AR_WIDTH_QVGA; + ar->height = AR_HEIGHT_QVGA; + ar->size = AR_SIZE_QVGA; + ar->frame_bytes = AR_FRAME_BYTES_QVGA; + ar->line_bytes = AR_LINE_BYTES_QVGA; + ar->mode = AR_MODE_INTERLACE; + } + mutex_init(&ar->lock); + init_waitqueue_head(&ar->wait); + +#if USE_INT + if (request_irq(M32R_IRQ_INT3, ar_interrupt, 0, "arv", ar)) { + v4l2_err("request_irq(%d) failed.\n", M32R_IRQ_INT3); + ret = -EIO; + goto out_irq; + } +#endif + + if (ar_initialize(ar) != 0) { + v4l2_err(v4l2_dev, "M64278 not found.\n"); + ret = -ENODEV; + goto out_dev; + } + + /* + * ok, we can initialize h/w according to parameters, + * so register video device as a frame grabber type. + * device is named "video[0-64]". + * video_register_device() initializes h/w using ar_initialize(). + */ + if (video_register_device(&ar->vdev, VFL_TYPE_GRABBER, video_nr) != 0) { + /* return -1, -ENFILE(full) or others */ + v4l2_err(v4l2_dev, "register video (Colour AR) failed.\n"); + ret = -ENODEV; + goto out_dev; + } + + v4l2_info(v4l2_dev, "%s: Found M64278 VGA (IRQ %d, Freq %dMHz).\n", + video_device_node_name(&ar->vdev), M32R_IRQ_INT3, freq); + + return 0; + +out_dev: +#if USE_INT + free_irq(M32R_IRQ_INT3, ar); + +out_irq: +#endif + for (i = 0; i < MAX_AR_HEIGHT; i++) + kfree(ar->frame[i]); + +out_line_buff: +#if USE_INT + kfree(ar->line_buff); + +out_end: +#endif + v4l2_device_unregister(&ar->v4l2_dev); + return ret; +} + + +static int __init ar_init_module(void) +{ + freq = (boot_cpu_data.bus_clock / 1000000); + printk(KERN_INFO "arv: Bus clock %d\n", freq); + if (freq != 50 && freq != 75) + freq = DEFAULT_FREQ; + return ar_init(); +} + +static void __exit ar_cleanup_module(void) +{ + struct ar *ar; + int i; + + ar = &ardev; + video_unregister_device(&ar->vdev); +#if USE_INT + free_irq(M32R_IRQ_INT3, ar); +#endif + for (i = 0; i < MAX_AR_HEIGHT; i++) + kfree(ar->frame[i]); +#if USE_INT + kfree(ar->line_buff); +#endif + v4l2_device_unregister(&ar->v4l2_dev); +} + +module_init(ar_init_module); +module_exit(ar_cleanup_module); + +MODULE_AUTHOR("Takeo Takahashi "); +MODULE_DESCRIPTION("Colour AR M64278(VGA) for Video4Linux"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VERSION); diff --git a/drivers/media/platform/blackfin/Kconfig b/drivers/media/platform/blackfin/Kconfig new file mode 100644 index 00000000..cc239972 --- /dev/null +++ b/drivers/media/platform/blackfin/Kconfig @@ -0,0 +1,15 @@ +config VIDEO_BLACKFIN_CAPTURE + tristate "Blackfin Video Capture Driver" + depends on VIDEO_V4L2 && BLACKFIN && I2C + select VIDEOBUF2_DMA_CONTIG + help + V4L2 bridge driver for Blackfin video capture device. + Choose PPI or EPPI as its interface. + + To compile this driver as a module, choose M here: the + module will be called bfin_capture. + +config VIDEO_BLACKFIN_PPI + tristate + depends on VIDEO_BLACKFIN_CAPTURE + default VIDEO_BLACKFIN_CAPTURE diff --git a/drivers/media/platform/blackfin/Makefile b/drivers/media/platform/blackfin/Makefile new file mode 100644 index 00000000..30421bc2 --- /dev/null +++ b/drivers/media/platform/blackfin/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_VIDEO_BLACKFIN_CAPTURE) += bfin_capture.o +obj-$(CONFIG_VIDEO_BLACKFIN_PPI) += ppi.o diff --git a/drivers/media/platform/blackfin/bfin_capture.c b/drivers/media/platform/blackfin/bfin_capture.c new file mode 100644 index 00000000..0e55b087 --- /dev/null +++ b/drivers/media/platform/blackfin/bfin_capture.c @@ -0,0 +1,1179 @@ +/* + * Analog Devices video capture driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#define CAPTURE_DRV_NAME "bfin_capture" +#define BCAP_MIN_NUM_BUF 2 + +struct bcap_format { + char *desc; + u32 pixelformat; + enum v4l2_mbus_pixelcode mbus_code; + int bpp; /* bits per pixel */ + int dlen; /* data length for ppi in bits */ +}; + +struct bcap_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +struct bcap_device { + /* capture device instance */ + struct v4l2_device v4l2_dev; + /* v4l2 control handler */ + struct v4l2_ctrl_handler ctrl_handler; + /* device node data */ + struct video_device *video_dev; + /* sub device instance */ + struct v4l2_subdev *sd; + /* capture config */ + struct bfin_capture_config *cfg; + /* ppi interface */ + struct ppi_if *ppi; + /* current input */ + unsigned int cur_input; + /* current selected standard */ + v4l2_std_id std; + /* current selected dv_timings */ + struct v4l2_dv_timings dv_timings; + /* used to store pixel format */ + struct v4l2_pix_format fmt; + /* bits per pixel*/ + int bpp; + /* data length for ppi in bits */ + int dlen; + /* used to store sensor supported format */ + struct bcap_format *sensor_formats; + /* number of sensor formats array */ + int num_sensor_formats; + /* pointing to current video buffer */ + struct bcap_buffer *cur_frm; + /* buffer queue used in videobuf2 */ + struct vb2_queue buffer_queue; + /* allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + /* queue of filled frames */ + struct list_head dma_queue; + /* used in videobuf2 callback */ + spinlock_t lock; + /* used to access capture device */ + struct mutex mutex; + /* used to wait ppi to complete one transfer */ + struct completion comp; + /* prepare to stop */ + bool stop; +}; + +struct bcap_fh { + struct v4l2_fh fh; + /* indicates whether this file handle is doing IO */ + bool io_allowed; +}; + +static const struct bcap_format bcap_formats[] = { + { + .desc = "YCbCr 4:2:2 Interleaved UYVY", + .pixelformat = V4L2_PIX_FMT_UYVY, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .bpp = 16, + .dlen = 8, + }, + { + .desc = "YCbCr 4:2:2 Interleaved YUYV", + .pixelformat = V4L2_PIX_FMT_YUYV, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .bpp = 16, + .dlen = 8, + }, + { + .desc = "YCbCr 4:2:2 Interleaved UYVY", + .pixelformat = V4L2_PIX_FMT_UYVY, + .mbus_code = V4L2_MBUS_FMT_UYVY8_1X16, + .bpp = 16, + .dlen = 16, + }, + { + .desc = "RGB 565", + .pixelformat = V4L2_PIX_FMT_RGB565, + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .bpp = 16, + .dlen = 8, + }, + { + .desc = "RGB 444", + .pixelformat = V4L2_PIX_FMT_RGB444, + .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, + .bpp = 16, + .dlen = 8, + }, + +}; +#define BCAP_MAX_FMTS ARRAY_SIZE(bcap_formats) + +static irqreturn_t bcap_isr(int irq, void *dev_id); + +static struct bcap_buffer *to_bcap_vb(struct vb2_buffer *vb) +{ + return container_of(vb, struct bcap_buffer, vb); +} + +static int bcap_init_sensor_formats(struct bcap_device *bcap_dev) +{ + enum v4l2_mbus_pixelcode code; + struct bcap_format *sf; + unsigned int num_formats = 0; + int i, j; + + while (!v4l2_subdev_call(bcap_dev->sd, video, + enum_mbus_fmt, num_formats, &code)) + num_formats++; + if (!num_formats) + return -ENXIO; + + sf = kzalloc(num_formats * sizeof(*sf), GFP_KERNEL); + if (!sf) + return -ENOMEM; + + for (i = 0; i < num_formats; i++) { + v4l2_subdev_call(bcap_dev->sd, video, + enum_mbus_fmt, i, &code); + for (j = 0; j < BCAP_MAX_FMTS; j++) + if (code == bcap_formats[j].mbus_code) + break; + if (j == BCAP_MAX_FMTS) { + /* we don't allow this sensor working with our bridge */ + kfree(sf); + return -EINVAL; + } + sf[i] = bcap_formats[j]; + } + bcap_dev->sensor_formats = sf; + bcap_dev->num_sensor_formats = num_formats; + return 0; +} + +static void bcap_free_sensor_formats(struct bcap_device *bcap_dev) +{ + bcap_dev->num_sensor_formats = 0; + kfree(bcap_dev->sensor_formats); + bcap_dev->sensor_formats = NULL; +} + +static int bcap_open(struct file *file) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct video_device *vfd = bcap_dev->video_dev; + struct bcap_fh *bcap_fh; + + if (!bcap_dev->sd) { + v4l2_err(&bcap_dev->v4l2_dev, "No sub device registered\n"); + return -ENODEV; + } + + bcap_fh = kzalloc(sizeof(*bcap_fh), GFP_KERNEL); + if (!bcap_fh) { + v4l2_err(&bcap_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + v4l2_fh_init(&bcap_fh->fh, vfd); + + /* store pointer to v4l2_fh in private_data member of file */ + file->private_data = &bcap_fh->fh; + v4l2_fh_add(&bcap_fh->fh); + bcap_fh->io_allowed = false; + return 0; +} + +static int bcap_release(struct file *file) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + /* if this instance is doing IO */ + if (bcap_fh->io_allowed) + vb2_queue_release(&bcap_dev->buffer_queue); + + file->private_data = NULL; + v4l2_fh_del(&bcap_fh->fh); + v4l2_fh_exit(&bcap_fh->fh); + kfree(bcap_fh); + return 0; +} + +static int bcap_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + int ret; + + if (mutex_lock_interruptible(&bcap_dev->mutex)) + return -ERESTARTSYS; + ret = vb2_mmap(&bcap_dev->buffer_queue, vma); + mutex_unlock(&bcap_dev->mutex); + return ret; +} + +#ifndef CONFIG_MMU +static unsigned long bcap_get_unmapped_area(struct file *file, + unsigned long addr, + unsigned long len, + unsigned long pgoff, + unsigned long flags) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_get_unmapped_area(&bcap_dev->buffer_queue, + addr, + len, + pgoff, + flags); +} +#endif + +static unsigned int bcap_poll(struct file *file, poll_table *wait) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + unsigned int res; + + mutex_lock(&bcap_dev->mutex); + res = vb2_poll(&bcap_dev->buffer_queue, file, wait); + mutex_unlock(&bcap_dev->mutex); + return res; +} + +static int bcap_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + + if (*nbuffers < BCAP_MIN_NUM_BUF) + *nbuffers = BCAP_MIN_NUM_BUF; + + *nplanes = 1; + sizes[0] = bcap_dev->fmt.sizeimage; + alloc_ctxs[0] = bcap_dev->alloc_ctx; + + return 0; +} + +static int bcap_buffer_init(struct vb2_buffer *vb) +{ + struct bcap_buffer *buf = to_bcap_vb(vb); + + INIT_LIST_HEAD(&buf->list); + return 0; +} + +static int bcap_buffer_prepare(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long size; + + size = bcap_dev->fmt.sizeimage; + if (vb2_plane_size(vb, 0) < size) { + v4l2_err(&bcap_dev->v4l2_dev, "buffer too small (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + vb2_set_plane_payload(&buf->vb, 0, size); + + return 0; +} + +static void bcap_buffer_queue(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long flags; + + spin_lock_irqsave(&bcap_dev->lock, flags); + list_add_tail(&buf->list, &bcap_dev->dma_queue); + spin_unlock_irqrestore(&bcap_dev->lock, flags); +} + +static void bcap_buffer_cleanup(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long flags; + + spin_lock_irqsave(&bcap_dev->lock, flags); + list_del_init(&buf->list); + spin_unlock_irqrestore(&bcap_dev->lock, flags); +} + +static void bcap_lock(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + mutex_lock(&bcap_dev->mutex); +} + +static void bcap_unlock(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + mutex_unlock(&bcap_dev->mutex); +} + +static int bcap_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + struct ppi_if *ppi = bcap_dev->ppi; + struct ppi_params params; + int ret; + + /* enable streamon on the sub device */ + ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 1); + if (ret && (ret != -ENOIOCTLCMD)) { + v4l2_err(&bcap_dev->v4l2_dev, "stream on failed in subdev\n"); + return ret; + } + + /* set ppi params */ + params.width = bcap_dev->fmt.width; + params.height = bcap_dev->fmt.height; + params.bpp = bcap_dev->bpp; + params.dlen = bcap_dev->dlen; + params.ppi_control = bcap_dev->cfg->ppi_control; + params.int_mask = bcap_dev->cfg->int_mask; + if (bcap_dev->cfg->inputs[bcap_dev->cur_input].capabilities + & V4L2_IN_CAP_DV_TIMINGS) { + struct v4l2_bt_timings *bt = &bcap_dev->dv_timings.bt; + + params.hdelay = bt->hsync + bt->hbackporch; + params.vdelay = bt->vsync + bt->vbackporch; + params.line = bt->hfrontporch + bt->hsync + + bt->hbackporch + bt->width; + params.frame = bt->vfrontporch + bt->vsync + + bt->vbackporch + bt->height; + if (bt->interlaced) + params.frame += bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + } else if (bcap_dev->cfg->inputs[bcap_dev->cur_input].capabilities + & V4L2_IN_CAP_STD) { + params.hdelay = 0; + params.vdelay = 0; + if (bcap_dev->std & V4L2_STD_525_60) { + params.line = 858; + params.frame = 525; + } else { + params.line = 864; + params.frame = 625; + } + } else { + params.hdelay = 0; + params.vdelay = 0; + params.line = params.width + bcap_dev->cfg->blank_pixels; + params.frame = params.height; + } + ret = ppi->ops->set_params(ppi, ¶ms); + if (ret < 0) { + v4l2_err(&bcap_dev->v4l2_dev, + "Error in setting ppi params\n"); + return ret; + } + + /* attach ppi DMA irq handler */ + ret = ppi->ops->attach_irq(ppi, bcap_isr); + if (ret < 0) { + v4l2_err(&bcap_dev->v4l2_dev, + "Error in attaching interrupt handler\n"); + return ret; + } + + INIT_COMPLETION(bcap_dev->comp); + bcap_dev->stop = false; + return 0; +} + +static int bcap_stop_streaming(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + struct ppi_if *ppi = bcap_dev->ppi; + int ret; + + if (!vb2_is_streaming(vq)) + return 0; + + bcap_dev->stop = true; + wait_for_completion(&bcap_dev->comp); + ppi->ops->stop(ppi); + ppi->ops->detach_irq(ppi); + ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 0); + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&bcap_dev->v4l2_dev, + "stream off failed in subdev\n"); + + /* release all active buffers */ + while (!list_empty(&bcap_dev->dma_queue)) { + bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + list_del(&bcap_dev->cur_frm->list); + vb2_buffer_done(&bcap_dev->cur_frm->vb, VB2_BUF_STATE_ERROR); + } + return 0; +} + +static struct vb2_ops bcap_video_qops = { + .queue_setup = bcap_queue_setup, + .buf_init = bcap_buffer_init, + .buf_prepare = bcap_buffer_prepare, + .buf_cleanup = bcap_buffer_cleanup, + .buf_queue = bcap_buffer_queue, + .wait_prepare = bcap_unlock, + .wait_finish = bcap_lock, + .start_streaming = bcap_start_streaming, + .stop_streaming = bcap_stop_streaming, +}; + +static int bcap_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct vb2_queue *vq = &bcap_dev->buffer_queue; + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (vb2_is_busy(vq)) + return -EBUSY; + + bcap_fh->io_allowed = true; + + return vb2_reqbufs(vq, req_buf); +} + +static int bcap_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_querybuf(&bcap_dev->buffer_queue, buf); +} + +static int bcap_qbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (!bcap_fh->io_allowed) + return -EBUSY; + + return vb2_qbuf(&bcap_dev->buffer_queue, buf); +} + +static int bcap_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (!bcap_fh->io_allowed) + return -EBUSY; + + return vb2_dqbuf(&bcap_dev->buffer_queue, + buf, file->f_flags & O_NONBLOCK); +} + +static irqreturn_t bcap_isr(int irq, void *dev_id) +{ + struct ppi_if *ppi = dev_id; + struct bcap_device *bcap_dev = ppi->priv; + struct vb2_buffer *vb = &bcap_dev->cur_frm->vb; + dma_addr_t addr; + + spin_lock(&bcap_dev->lock); + + if (!list_empty(&bcap_dev->dma_queue)) { + v4l2_get_timestamp(&vb->v4l2_buf.timestamp); + if (ppi->err) { + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); + ppi->err = false; + } else { + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); + } + bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + list_del(&bcap_dev->cur_frm->list); + } else { + /* clear error flag, we will get a new frame */ + if (ppi->err) + ppi->err = false; + } + + ppi->ops->stop(ppi); + + if (bcap_dev->stop) { + complete(&bcap_dev->comp); + } else { + addr = vb2_dma_contig_plane_dma_addr(&bcap_dev->cur_frm->vb, 0); + ppi->ops->update_addr(ppi, (unsigned long)addr); + ppi->ops->start(ppi); + } + + spin_unlock(&bcap_dev->lock); + + return IRQ_HANDLED; +} + +static int bcap_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_fh *fh = file->private_data; + struct ppi_if *ppi = bcap_dev->ppi; + dma_addr_t addr; + int ret; + + if (!fh->io_allowed) + return -EBUSY; + + /* call streamon to start streaming in videobuf */ + ret = vb2_streamon(&bcap_dev->buffer_queue, buf_type); + if (ret) + return ret; + + /* if dma queue is empty, return error */ + if (list_empty(&bcap_dev->dma_queue)) { + v4l2_err(&bcap_dev->v4l2_dev, "dma queue is empty\n"); + ret = -EINVAL; + goto err; + } + + /* get the next frame from the dma queue */ + bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + /* remove buffer from the dma queue */ + list_del(&bcap_dev->cur_frm->list); + addr = vb2_dma_contig_plane_dma_addr(&bcap_dev->cur_frm->vb, 0); + /* update DMA address */ + ppi->ops->update_addr(ppi, (unsigned long)addr); + /* enable ppi */ + ppi->ops->start(ppi); + + return 0; +err: + vb2_streamoff(&bcap_dev->buffer_queue, buf_type); + return ret; +} + +static int bcap_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_fh *fh = file->private_data; + + if (!fh->io_allowed) + return -EBUSY; + + return vb2_streamoff(&bcap_dev->buffer_queue, buf_type); +} + +static int bcap_querystd(struct file *file, void *priv, v4l2_std_id *std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, video, querystd, std); +} + +static int bcap_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + *std = bcap_dev->std; + return 0; +} + +static int bcap_s_std(struct file *file, void *priv, v4l2_std_id std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + int ret; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + ret = v4l2_subdev_call(bcap_dev->sd, core, s_std, std); + if (ret < 0) + return ret; + + bcap_dev->std = std; + return 0; +} + +static int bcap_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + int ret; + + ret = v4l2_subdev_call(bcap_dev->sd, video, + g_dv_timings, timings); + if (ret < 0) + return ret; + + bcap_dev->dv_timings = *timings; + return 0; +} + +static int bcap_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + int ret; + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + ret = v4l2_subdev_call(bcap_dev->sd, video, s_dv_timings, timings); + if (ret < 0) + return ret; + + bcap_dev->dv_timings = *timings; + return 0; +} + +static int bcap_enum_input(struct file *file, void *priv, + struct v4l2_input *input) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bfin_capture_config *config = bcap_dev->cfg; + int ret; + u32 status; + + if (input->index >= config->num_inputs) + return -EINVAL; + + *input = config->inputs[input->index]; + /* get input status */ + ret = v4l2_subdev_call(bcap_dev->sd, video, g_input_status, &status); + if (!ret) + input->status = status; + return 0; +} + +static int bcap_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + *index = bcap_dev->cur_input; + return 0; +} + +static int bcap_s_input(struct file *file, void *priv, unsigned int index) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bfin_capture_config *config = bcap_dev->cfg; + struct bcap_route *route; + int ret; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + if (index >= config->num_inputs) + return -EINVAL; + + route = &config->routes[index]; + ret = v4l2_subdev_call(bcap_dev->sd, video, s_routing, + route->input, route->output, 0); + if ((ret < 0) && (ret != -ENOIOCTLCMD)) { + v4l2_err(&bcap_dev->v4l2_dev, "Failed to set input\n"); + return ret; + } + bcap_dev->cur_input = index; + /* if this route has specific config, update ppi control */ + if (route->ppi_control) + config->ppi_control = route->ppi_control; + return 0; +} + +static int bcap_try_format(struct bcap_device *bcap, + struct v4l2_pix_format *pixfmt, + struct bcap_format *bcap_fmt) +{ + struct bcap_format *sf = bcap->sensor_formats; + struct bcap_format *fmt = NULL; + struct v4l2_mbus_framefmt mbus_fmt; + int ret, i; + + for (i = 0; i < bcap->num_sensor_formats; i++) { + fmt = &sf[i]; + if (pixfmt->pixelformat == fmt->pixelformat) + break; + } + if (i == bcap->num_sensor_formats) + fmt = &sf[0]; + + v4l2_fill_mbus_format(&mbus_fmt, pixfmt, fmt->mbus_code); + ret = v4l2_subdev_call(bcap->sd, video, + try_mbus_fmt, &mbus_fmt); + if (ret < 0) + return ret; + v4l2_fill_pix_format(pixfmt, &mbus_fmt); + if (bcap_fmt) { + for (i = 0; i < bcap->num_sensor_formats; i++) { + fmt = &sf[i]; + if (mbus_fmt.code == fmt->mbus_code) + break; + } + *bcap_fmt = *fmt; + } + pixfmt->bytesperline = pixfmt->width * fmt->bpp / 8; + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + return 0; +} + +static int bcap_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_format *sf = bcap_dev->sensor_formats; + + if (fmt->index >= bcap_dev->num_sensor_formats) + return -EINVAL; + + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strlcpy(fmt->description, + sf[fmt->index].desc, + sizeof(fmt->description)); + fmt->pixelformat = sf[fmt->index].pixelformat; + return 0; +} + +static int bcap_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + return bcap_try_format(bcap_dev, pixfmt, NULL); +} + +static int bcap_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + fmt->fmt.pix = bcap_dev->fmt; + return 0; +} + +static int bcap_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_mbus_framefmt mbus_fmt; + struct bcap_format bcap_fmt; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + int ret; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + /* see if format works */ + ret = bcap_try_format(bcap_dev, pixfmt, &bcap_fmt); + if (ret < 0) + return ret; + + v4l2_fill_mbus_format(&mbus_fmt, pixfmt, bcap_fmt.mbus_code); + ret = v4l2_subdev_call(bcap_dev->sd, video, s_mbus_fmt, &mbus_fmt); + if (ret < 0) + return ret; + bcap_dev->fmt = *pixfmt; + bcap_dev->bpp = bcap_fmt.bpp; + bcap_dev->dlen = bcap_fmt.dlen; + return 0; +} + +static int bcap_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); + strlcpy(cap->bus_info, "Blackfin Platform", sizeof(cap->bus_info)); + strlcpy(cap->card, bcap_dev->cfg->card_name, sizeof(cap->card)); + return 0; +} + +static int bcap_g_parm(struct file *file, void *fh, + struct v4l2_streamparm *a) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + return v4l2_subdev_call(bcap_dev->sd, video, g_parm, a); +} + +static int bcap_s_parm(struct file *file, void *fh, + struct v4l2_streamparm *a) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + return v4l2_subdev_call(bcap_dev->sd, video, s_parm, a); +} + +static int bcap_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + return v4l2_subdev_call(bcap_dev->sd, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int bcap_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, core, + g_register, reg); +} + +static int bcap_dbg_s_register(struct file *file, void *priv, + const struct v4l2_dbg_register *reg) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, core, + s_register, reg); +} +#endif + +static int bcap_log_status(struct file *file, void *priv) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + /* status for sub devices */ + v4l2_device_call_all(&bcap_dev->v4l2_dev, 0, core, log_status); + return 0; +} + +static const struct v4l2_ioctl_ops bcap_ioctl_ops = { + .vidioc_querycap = bcap_querycap, + .vidioc_g_fmt_vid_cap = bcap_g_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = bcap_enum_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = bcap_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = bcap_try_fmt_vid_cap, + .vidioc_enum_input = bcap_enum_input, + .vidioc_g_input = bcap_g_input, + .vidioc_s_input = bcap_s_input, + .vidioc_querystd = bcap_querystd, + .vidioc_s_std = bcap_s_std, + .vidioc_g_std = bcap_g_std, + .vidioc_s_dv_timings = bcap_s_dv_timings, + .vidioc_g_dv_timings = bcap_g_dv_timings, + .vidioc_reqbufs = bcap_reqbufs, + .vidioc_querybuf = bcap_querybuf, + .vidioc_qbuf = bcap_qbuf, + .vidioc_dqbuf = bcap_dqbuf, + .vidioc_streamon = bcap_streamon, + .vidioc_streamoff = bcap_streamoff, + .vidioc_g_parm = bcap_g_parm, + .vidioc_s_parm = bcap_s_parm, + .vidioc_g_chip_ident = bcap_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = bcap_dbg_g_register, + .vidioc_s_register = bcap_dbg_s_register, +#endif + .vidioc_log_status = bcap_log_status, +}; + +static struct v4l2_file_operations bcap_fops = { + .owner = THIS_MODULE, + .open = bcap_open, + .release = bcap_release, + .unlocked_ioctl = video_ioctl2, + .mmap = bcap_mmap, +#ifndef CONFIG_MMU + .get_unmapped_area = bcap_get_unmapped_area, +#endif + .poll = bcap_poll +}; + +static int bcap_probe(struct platform_device *pdev) +{ + struct bcap_device *bcap_dev; + struct video_device *vfd; + struct i2c_adapter *i2c_adap; + struct bfin_capture_config *config; + struct vb2_queue *q; + struct bcap_route *route; + int ret; + + config = pdev->dev.platform_data; + if (!config) { + v4l2_err(pdev->dev.driver, "Unable to get board config\n"); + return -ENODEV; + } + + bcap_dev = kzalloc(sizeof(*bcap_dev), GFP_KERNEL); + if (!bcap_dev) { + v4l2_err(pdev->dev.driver, "Unable to alloc bcap_dev\n"); + return -ENOMEM; + } + + bcap_dev->cfg = config; + + bcap_dev->ppi = ppi_create_instance(config->ppi_info); + if (!bcap_dev->ppi) { + v4l2_err(pdev->dev.driver, "Unable to create ppi\n"); + ret = -ENODEV; + goto err_free_dev; + } + bcap_dev->ppi->priv = bcap_dev; + + bcap_dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(bcap_dev->alloc_ctx)) { + ret = PTR_ERR(bcap_dev->alloc_ctx); + goto err_free_ppi; + } + + vfd = video_device_alloc(); + if (!vfd) { + ret = -ENOMEM; + v4l2_err(pdev->dev.driver, "Unable to alloc video device\n"); + goto err_cleanup_ctx; + } + + /* initialize field of video device */ + vfd->release = video_device_release; + vfd->fops = &bcap_fops; + vfd->ioctl_ops = &bcap_ioctl_ops; + vfd->tvnorms = 0; + vfd->v4l2_dev = &bcap_dev->v4l2_dev; + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + strncpy(vfd->name, CAPTURE_DRV_NAME, sizeof(vfd->name)); + bcap_dev->video_dev = vfd; + + ret = v4l2_device_register(&pdev->dev, &bcap_dev->v4l2_dev); + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register v4l2 device\n"); + goto err_release_vdev; + } + v4l2_info(&bcap_dev->v4l2_dev, "v4l2 device registered\n"); + + bcap_dev->v4l2_dev.ctrl_handler = &bcap_dev->ctrl_handler; + ret = v4l2_ctrl_handler_init(&bcap_dev->ctrl_handler, 0); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to init control handler\n"); + goto err_unreg_v4l2; + } + + spin_lock_init(&bcap_dev->lock); + /* initialize queue */ + q = &bcap_dev->buffer_queue; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP; + q->drv_priv = bcap_dev; + q->buf_struct_size = sizeof(struct bcap_buffer); + q->ops = &bcap_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + + vb2_queue_init(q); + + mutex_init(&bcap_dev->mutex); + init_completion(&bcap_dev->comp); + + /* init video dma queues */ + INIT_LIST_HEAD(&bcap_dev->dma_queue); + + vfd->lock = &bcap_dev->mutex; + + /* register video device */ + ret = video_register_device(bcap_dev->video_dev, VFL_TYPE_GRABBER, -1); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to register video device\n"); + goto err_free_handler; + } + video_set_drvdata(bcap_dev->video_dev, bcap_dev); + v4l2_info(&bcap_dev->v4l2_dev, "video device registered as: %s\n", + video_device_node_name(vfd)); + + /* load up the subdevice */ + i2c_adap = i2c_get_adapter(config->i2c_adapter_id); + if (!i2c_adap) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to find i2c adapter\n"); + ret = -ENODEV; + goto err_unreg_vdev; + + } + bcap_dev->sd = v4l2_i2c_new_subdev_board(&bcap_dev->v4l2_dev, + i2c_adap, + &config->board_info, + NULL); + if (bcap_dev->sd) { + int i; + if (!config->num_inputs) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to work without input\n"); + goto err_unreg_vdev; + } + + /* update tvnorms from the sub devices */ + for (i = 0; i < config->num_inputs; i++) + vfd->tvnorms |= config->inputs[i].std; + } else { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to register sub device\n"); + goto err_unreg_vdev; + } + + v4l2_info(&bcap_dev->v4l2_dev, "v4l2 sub device registered\n"); + + /* + * explicitly set input, otherwise some boards + * may not work at the state as we expected + */ + route = &config->routes[0]; + ret = v4l2_subdev_call(bcap_dev->sd, video, s_routing, + route->input, route->output, 0); + if ((ret < 0) && (ret != -ENOIOCTLCMD)) { + v4l2_err(&bcap_dev->v4l2_dev, "Failed to set input\n"); + goto err_unreg_vdev; + } + bcap_dev->cur_input = 0; + /* if this route has specific config, update ppi control */ + if (route->ppi_control) + config->ppi_control = route->ppi_control; + + /* now we can probe the default state */ + if (config->inputs[0].capabilities & V4L2_IN_CAP_STD) { + v4l2_std_id std; + ret = v4l2_subdev_call(bcap_dev->sd, core, g_std, &std); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to get std\n"); + goto err_unreg_vdev; + } + bcap_dev->std = std; + } + if (config->inputs[0].capabilities & V4L2_IN_CAP_DV_TIMINGS) { + struct v4l2_dv_timings dv_timings; + ret = v4l2_subdev_call(bcap_dev->sd, video, + g_dv_timings, &dv_timings); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to get dv timings\n"); + goto err_unreg_vdev; + } + bcap_dev->dv_timings = dv_timings; + } + ret = bcap_init_sensor_formats(bcap_dev); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to create sensor formats table\n"); + goto err_unreg_vdev; + } + return 0; +err_unreg_vdev: + video_unregister_device(bcap_dev->video_dev); + bcap_dev->video_dev = NULL; +err_free_handler: + v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler); +err_unreg_v4l2: + v4l2_device_unregister(&bcap_dev->v4l2_dev); +err_release_vdev: + if (bcap_dev->video_dev) + video_device_release(bcap_dev->video_dev); +err_cleanup_ctx: + vb2_dma_contig_cleanup_ctx(bcap_dev->alloc_ctx); +err_free_ppi: + ppi_delete_instance(bcap_dev->ppi); +err_free_dev: + kfree(bcap_dev); + return ret; +} + +static int bcap_remove(struct platform_device *pdev) +{ + struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); + struct bcap_device *bcap_dev = container_of(v4l2_dev, + struct bcap_device, v4l2_dev); + + bcap_free_sensor_formats(bcap_dev); + video_unregister_device(bcap_dev->video_dev); + v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler); + v4l2_device_unregister(v4l2_dev); + vb2_dma_contig_cleanup_ctx(bcap_dev->alloc_ctx); + ppi_delete_instance(bcap_dev->ppi); + kfree(bcap_dev); + return 0; +} + +static struct platform_driver bcap_driver = { + .driver = { + .name = CAPTURE_DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = bcap_probe, + .remove = bcap_remove, +}; +module_platform_driver(bcap_driver); + +MODULE_DESCRIPTION("Analog Devices blackfin video capture driver"); +MODULE_AUTHOR("Scott Jiang "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/blackfin/ppi.c b/drivers/media/platform/blackfin/ppi.c new file mode 100644 index 00000000..01b5b501 --- /dev/null +++ b/drivers/media/platform/blackfin/ppi.c @@ -0,0 +1,333 @@ +/* + * ppi.c Analog Devices Parallel Peripheral Interface driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include +#include +#include +#include + +#include + +static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler); +static void ppi_detach_irq(struct ppi_if *ppi); +static int ppi_start(struct ppi_if *ppi); +static int ppi_stop(struct ppi_if *ppi); +static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params); +static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr); + +static const struct ppi_ops ppi_ops = { + .attach_irq = ppi_attach_irq, + .detach_irq = ppi_detach_irq, + .start = ppi_start, + .stop = ppi_stop, + .set_params = ppi_set_params, + .update_addr = ppi_update_addr, +}; + +static irqreturn_t ppi_irq_err(int irq, void *dev_id) +{ + struct ppi_if *ppi = dev_id; + const struct ppi_info *info = ppi->info; + + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + unsigned short status; + + /* register on bf561 is cleared when read + * others are W1C + */ + status = bfin_read16(®->status); + if (status & 0x3000) + ppi->err = true; + bfin_write16(®->status, 0xff00); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + unsigned short status; + + status = bfin_read16(®->status); + if (status & 0x2) + ppi->err = true; + bfin_write16(®->status, 0xffff); + break; + } + case PPI_TYPE_EPPI3: + { + struct bfin_eppi3_regs *reg = info->base; + unsigned long stat; + + stat = bfin_read32(®->stat); + if (stat & 0x2) + ppi->err = true; + bfin_write32(®->stat, 0xc0ff); + break; + } + default: + break; + } + + return IRQ_HANDLED; +} + +static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler) +{ + const struct ppi_info *info = ppi->info; + int ret; + + ret = request_dma(info->dma_ch, "PPI_DMA"); + + if (ret) { + pr_err("Unable to allocate DMA channel for PPI\n"); + return ret; + } + set_dma_callback(info->dma_ch, handler, ppi); + + if (ppi->err_int) { + ret = request_irq(info->irq_err, ppi_irq_err, 0, "PPI ERROR", ppi); + if (ret) { + pr_err("Unable to allocate IRQ for PPI\n"); + free_dma(info->dma_ch); + } + } + return ret; +} + +static void ppi_detach_irq(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + if (ppi->err_int) + free_irq(info->irq_err, ppi); + free_dma(info->dma_ch); +} + +static int ppi_start(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + /* enable DMA */ + enable_dma(info->dma_ch); + + /* enable PPI */ + ppi->ppi_control |= PORT_EN; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + bfin_write16(®->control, ppi->ppi_control); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + bfin_write32(®->control, ppi->ppi_control); + break; + } + case PPI_TYPE_EPPI3: + { + struct bfin_eppi3_regs *reg = info->base; + bfin_write32(®->ctl, ppi->ppi_control); + break; + } + default: + return -EINVAL; + } + + SSYNC(); + return 0; +} + +static int ppi_stop(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + /* disable PPI */ + ppi->ppi_control &= ~PORT_EN; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + bfin_write16(®->control, ppi->ppi_control); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + bfin_write32(®->control, ppi->ppi_control); + break; + } + case PPI_TYPE_EPPI3: + { + struct bfin_eppi3_regs *reg = info->base; + bfin_write32(®->ctl, ppi->ppi_control); + break; + } + default: + return -EINVAL; + } + + /* disable DMA */ + clear_dma_irqstat(info->dma_ch); + disable_dma(info->dma_ch); + + SSYNC(); + return 0; +} + +static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) +{ + const struct ppi_info *info = ppi->info; + int dma32 = 0; + int dma_config, bytes_per_line; + int hcount, hdelay, samples_per_line; + + bytes_per_line = params->width * params->bpp / 8; + /* convert parameters unit from pixels to samples */ + hcount = params->width * params->bpp / params->dlen; + hdelay = params->hdelay * params->bpp / params->dlen; + samples_per_line = params->line * params->bpp / params->dlen; + if (params->int_mask == 0xFFFFFFFF) + ppi->err_int = false; + else + ppi->err_int = true; + + dma_config = (DMA_FLOW_STOP | RESTART | DMA2D | DI_EN_Y); + ppi->ppi_control = params->ppi_control & ~PORT_EN; + if (!(ppi->ppi_control & PORT_DIR)) + dma_config |= WNR; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + + if (params->ppi_control & DMA32) + dma32 = 1; + + bfin_write16(®->control, ppi->ppi_control); + bfin_write16(®->count, samples_per_line - 1); + bfin_write16(®->frame, params->frame); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + + if ((params->ppi_control & PACK_EN) + || (params->ppi_control & 0x38000) > DLEN_16) + dma32 = 1; + + bfin_write32(®->control, ppi->ppi_control); + bfin_write16(®->line, samples_per_line); + bfin_write16(®->frame, params->frame); + bfin_write16(®->hdelay, hdelay); + bfin_write16(®->vdelay, params->vdelay); + bfin_write16(®->hcount, hcount); + bfin_write16(®->vcount, params->height); + break; + } + case PPI_TYPE_EPPI3: + { + struct bfin_eppi3_regs *reg = info->base; + + if ((params->ppi_control & PACK_EN) + || (params->ppi_control & 0x70000) > DLEN_16) + dma32 = 1; + + bfin_write32(®->ctl, ppi->ppi_control); + bfin_write32(®->line, samples_per_line); + bfin_write32(®->frame, params->frame); + bfin_write32(®->hdly, hdelay); + bfin_write32(®->vdly, params->vdelay); + bfin_write32(®->hcnt, hcount); + bfin_write32(®->vcnt, params->height); + if (params->int_mask) + bfin_write32(®->imsk, params->int_mask & 0xFF); + break; + } + default: + return -EINVAL; + } + + if (dma32) { + dma_config |= WDSIZE_32 | PSIZE_32; + set_dma_x_count(info->dma_ch, bytes_per_line >> 2); + set_dma_x_modify(info->dma_ch, 4); + set_dma_y_modify(info->dma_ch, 4); + } else { + dma_config |= WDSIZE_16 | PSIZE_16; + set_dma_x_count(info->dma_ch, bytes_per_line >> 1); + set_dma_x_modify(info->dma_ch, 2); + set_dma_y_modify(info->dma_ch, 2); + } + set_dma_y_count(info->dma_ch, params->height); + set_dma_config(info->dma_ch, dma_config); + + SSYNC(); + return 0; +} + +static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr) +{ + set_dma_start_addr(ppi->info->dma_ch, addr); +} + +struct ppi_if *ppi_create_instance(const struct ppi_info *info) +{ + struct ppi_if *ppi; + + if (!info || !info->pin_req) + return NULL; + + if (peripheral_request_list(info->pin_req, KBUILD_MODNAME)) { + pr_err("request peripheral failed\n"); + return NULL; + } + + ppi = kzalloc(sizeof(*ppi), GFP_KERNEL); + if (!ppi) { + peripheral_free_list(info->pin_req); + pr_err("unable to allocate memory for ppi handle\n"); + return NULL; + } + ppi->ops = &ppi_ops; + ppi->info = info; + + pr_info("ppi probe success\n"); + return ppi; +} +EXPORT_SYMBOL(ppi_create_instance); + +void ppi_delete_instance(struct ppi_if *ppi) +{ + peripheral_free_list(ppi->info->pin_req); + kfree(ppi); +} +EXPORT_SYMBOL(ppi_delete_instance); + +MODULE_DESCRIPTION("Analog Devices PPI driver"); +MODULE_AUTHOR("Scott Jiang "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c new file mode 100644 index 00000000..c504f70d --- /dev/null +++ b/drivers/media/platform/coda.c @@ -0,0 +1,2110 @@ +/* + * Coda multi-standard codec IP + * + * Copyright (C) 2012 Vista Silicon S.L. + * Javier Martin, + * Xavier Duret + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "coda.h" + +#define CODA_NAME "coda" + +#define CODA_MAX_INSTANCES 4 + +#define CODA_FMO_BUF_SIZE 32 +#define CODADX6_WORK_BUF_SIZE (288 * 1024 + CODA_FMO_BUF_SIZE * 8 * 1024) +#define CODA7_WORK_BUF_SIZE (512 * 1024 + CODA_FMO_BUF_SIZE * 8 * 1024) +#define CODA_PARA_BUF_SIZE (10 * 1024) +#define CODA_ISRAM_SIZE (2048 * 2) +#define CODADX6_IRAM_SIZE 0xb000 +#define CODA7_IRAM_SIZE 0x14000 /* 81920 bytes */ + +#define CODA_MAX_FRAMEBUFFERS 2 + +#define MAX_W 720 +#define MAX_H 576 +#define CODA_MAX_FRAME_SIZE 0x90000 +#define FMO_SLICE_SAVE_BUF_SIZE (32) +#define CODA_DEFAULT_GAMMA 4096 + +#define MIN_W 176 +#define MIN_H 144 +#define MAX_W 720 +#define MAX_H 576 + +#define S_ALIGN 1 /* multiple of 2 */ +#define W_ALIGN 1 /* multiple of 2 */ +#define H_ALIGN 1 /* multiple of 2 */ + +#define fh_to_ctx(__fh) container_of(__fh, struct coda_ctx, fh) + +static int coda_debug; +module_param(coda_debug, int, 0); +MODULE_PARM_DESC(coda_debug, "Debug level (0-1)"); + +enum { + V4L2_M2M_SRC = 0, + V4L2_M2M_DST = 1, +}; + +enum coda_fmt_type { + CODA_FMT_ENC, + CODA_FMT_RAW, +}; + +enum coda_inst_type { + CODA_INST_ENCODER, + CODA_INST_DECODER, +}; + +enum coda_product { + CODA_DX6 = 0xf001, + CODA_7541 = 0xf012, +}; + +struct coda_fmt { + char *name; + u32 fourcc; + enum coda_fmt_type type; +}; + +struct coda_devtype { + char *firmware; + enum coda_product product; + struct coda_fmt *formats; + unsigned int num_formats; + size_t workbuf_size; +}; + +/* Per-queue, driver-specific private data */ +struct coda_q_data { + unsigned int width; + unsigned int height; + unsigned int sizeimage; + struct coda_fmt *fmt; +}; + +struct coda_aux_buf { + void *vaddr; + dma_addr_t paddr; + u32 size; +}; + +struct coda_dev { + struct v4l2_device v4l2_dev; + struct video_device vfd; + struct platform_device *plat_dev; + const struct coda_devtype *devtype; + + void __iomem *regs_base; + struct clk *clk_per; + struct clk *clk_ahb; + + struct coda_aux_buf codebuf; + struct coda_aux_buf workbuf; + struct gen_pool *iram_pool; + long unsigned int iram_vaddr; + long unsigned int iram_paddr; + unsigned long iram_size; + + spinlock_t irqlock; + struct mutex dev_mutex; + struct v4l2_m2m_dev *m2m_dev; + struct vb2_alloc_ctx *alloc_ctx; + struct list_head instances; + unsigned long instance_mask; + struct delayed_work timeout; + struct completion done; +}; + +struct coda_params { + u8 rot_mode; + u8 h264_intra_qp; + u8 h264_inter_qp; + u8 mpeg4_intra_qp; + u8 mpeg4_inter_qp; + u8 gop_size; + int codec_mode; + enum v4l2_mpeg_video_multi_slice_mode slice_mode; + u32 framerate; + u16 bitrate; + u32 slice_max_bits; + u32 slice_max_mb; +}; + +struct coda_ctx { + struct coda_dev *dev; + struct list_head list; + int aborting; + int rawstreamon; + int compstreamon; + u32 isequence; + struct coda_q_data q_data[2]; + enum coda_inst_type inst_type; + enum v4l2_colorspace colorspace; + struct coda_params params; + struct v4l2_m2m_ctx *m2m_ctx; + struct v4l2_ctrl_handler ctrls; + struct v4l2_fh fh; + int gopcounter; + char vpu_header[3][64]; + int vpu_header_size[3]; + struct coda_aux_buf parabuf; + struct coda_aux_buf internal_frames[CODA_MAX_FRAMEBUFFERS]; + int num_internal_frames; + int idx; +}; + +static const u8 coda_filler_nal[14] = { 0x00, 0x00, 0x00, 0x01, 0x0c, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80 }; +static const u8 coda_filler_size[8] = { 0, 7, 14, 13, 12, 11, 10, 9 }; + +static inline void coda_write(struct coda_dev *dev, u32 data, u32 reg) +{ + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, + "%s: data=0x%x, reg=0x%x\n", __func__, data, reg); + writel(data, dev->regs_base + reg); +} + +static inline unsigned int coda_read(struct coda_dev *dev, u32 reg) +{ + u32 data; + data = readl(dev->regs_base + reg); + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, + "%s: data=0x%x, reg=0x%x\n", __func__, data, reg); + return data; +} + +static inline unsigned long coda_isbusy(struct coda_dev *dev) +{ + return coda_read(dev, CODA_REG_BIT_BUSY); +} + +static inline int coda_is_initialized(struct coda_dev *dev) +{ + return (coda_read(dev, CODA_REG_BIT_CUR_PC) != 0); +} + +static int coda_wait_timeout(struct coda_dev *dev) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + while (coda_isbusy(dev)) { + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + } + return 0; +} + +static void coda_command_async(struct coda_ctx *ctx, int cmd) +{ + struct coda_dev *dev = ctx->dev; + coda_write(dev, CODA_REG_BIT_BUSY_FLAG, CODA_REG_BIT_BUSY); + + coda_write(dev, ctx->idx, CODA_REG_BIT_RUN_INDEX); + coda_write(dev, ctx->params.codec_mode, CODA_REG_BIT_RUN_COD_STD); + coda_write(dev, cmd, CODA_REG_BIT_RUN_COMMAND); +} + +static int coda_command_sync(struct coda_ctx *ctx, int cmd) +{ + struct coda_dev *dev = ctx->dev; + + coda_command_async(ctx, cmd); + return coda_wait_timeout(dev); +} + +static struct coda_q_data *get_q_data(struct coda_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &(ctx->q_data[V4L2_M2M_SRC]); + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &(ctx->q_data[V4L2_M2M_DST]); + default: + BUG(); + } + return NULL; +} + +/* + * Add one array of supported formats for each version of Coda: + * i.MX27 -> codadx6 + * i.MX51 -> coda7 + * i.MX6 -> coda960 + */ +static struct coda_fmt codadx6_formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .type = CODA_FMT_RAW, + }, + { + .name = "H264 Encoded Stream", + .fourcc = V4L2_PIX_FMT_H264, + .type = CODA_FMT_ENC, + }, + { + .name = "MPEG4 Encoded Stream", + .fourcc = V4L2_PIX_FMT_MPEG4, + .type = CODA_FMT_ENC, + }, +}; + +static struct coda_fmt coda7_formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .type = CODA_FMT_RAW, + }, + { + .name = "H264 Encoded Stream", + .fourcc = V4L2_PIX_FMT_H264, + .type = CODA_FMT_ENC, + }, + { + .name = "MPEG4 Encoded Stream", + .fourcc = V4L2_PIX_FMT_MPEG4, + .type = CODA_FMT_ENC, + }, +}; + +static struct coda_fmt *find_format(struct coda_dev *dev, struct v4l2_format *f) +{ + struct coda_fmt *formats = dev->devtype->formats; + int num_formats = dev->devtype->num_formats; + unsigned int k; + + for (k = 0; k < num_formats; k++) { + if (formats[k].fourcc == f->fmt.pix.pixelformat) + break; + } + + if (k == num_formats) + return NULL; + + return &formats[k]; +} + +/* + * V4L2 ioctl() operations. + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, CODA_NAME, sizeof(cap->driver)); + strlcpy(cap->card, CODA_NAME, sizeof(cap->card)); + strlcpy(cap->bus_info, CODA_NAME, sizeof(cap->bus_info)); + /* + * This is only a mem-to-mem video device. The capture and output + * device capability flags are left only for backward compatibility + * and are scheduled for removal. + */ + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | + V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + + return 0; +} + +static int enum_fmt(void *priv, struct v4l2_fmtdesc *f, + enum coda_fmt_type type) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + struct coda_dev *dev = ctx->dev; + struct coda_fmt *formats = dev->devtype->formats; + struct coda_fmt *fmt; + int num_formats = dev->devtype->num_formats; + int i, num = 0; + + for (i = 0; i < num_formats; i++) { + if (formats[i].type == type) { + if (num == f->index) + break; + ++num; + } + } + + if (i < num_formats) { + fmt = &formats[i]; + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; + return 0; + } + + /* Format not found */ + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(priv, f, CODA_FMT_ENC); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(priv, f, CODA_FMT_RAW); +} + +static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct coda_q_data *q_data; + struct coda_ctx *ctx = fh_to_ctx(priv); + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.pixelformat = q_data->fmt->fourcc; + f->fmt.pix.width = q_data->width; + f->fmt.pix.height = q_data->height; + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) + f->fmt.pix.bytesperline = round_up(f->fmt.pix.width, 2); + else /* encoded formats h.264/mpeg4 */ + f->fmt.pix.bytesperline = 0; + + f->fmt.pix.sizeimage = q_data->sizeimage; + f->fmt.pix.colorspace = ctx->colorspace; + + return 0; +} + +static int vidioc_try_fmt(struct coda_dev *dev, struct v4l2_format *f) +{ + enum v4l2_field field; + + field = f->fmt.pix.field; + if (field == V4L2_FIELD_ANY) + field = V4L2_FIELD_NONE; + else if (V4L2_FIELD_NONE != field) + return -EINVAL; + + /* V4L2 specification suggests the driver corrects the format struct + * if any of the dimensions is unsupported */ + f->fmt.pix.field = field; + + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) { + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, + W_ALIGN, &f->fmt.pix.height, + MIN_H, MAX_H, H_ALIGN, S_ALIGN); + f->fmt.pix.bytesperline = round_up(f->fmt.pix.width, 2); + f->fmt.pix.sizeimage = f->fmt.pix.width * + f->fmt.pix.height * 3 / 2; + } else { /*encoded formats h.264/mpeg4 */ + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = CODA_MAX_FRAME_SIZE; + } + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + struct coda_fmt *fmt; + struct coda_ctx *ctx = fh_to_ctx(priv); + + fmt = find_format(ctx->dev, f); + /* + * Since decoding support is not implemented yet do not allow + * CODA_FMT_RAW formats in the capture interface. + */ + if (!fmt || !(fmt->type == CODA_FMT_ENC)) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_H264; + + f->fmt.pix.colorspace = ctx->colorspace; + + ret = vidioc_try_fmt(ctx->dev, f); + if (ret < 0) + return ret; + + return 0; +} + +static int vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + struct coda_fmt *fmt; + int ret; + + fmt = find_format(ctx->dev, f); + /* + * Since decoding support is not implemented yet do not allow + * CODA_FMT formats in the capture interface. + */ + if (!fmt || !(fmt->type == CODA_FMT_RAW)) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420; + + if (!f->fmt.pix.colorspace) + f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709; + + ret = vidioc_try_fmt(ctx->dev, f); + if (ret < 0) + return ret; + + return 0; +} + +static int vidioc_s_fmt(struct coda_ctx *ctx, struct v4l2_format *f) +{ + struct coda_q_data *q_data; + struct vb2_queue *vq; + int ret; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + if (!q_data) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + ret = vidioc_try_fmt(ctx->dev, f); + if (ret) + return ret; + + q_data->fmt = find_format(ctx->dev, f); + q_data->width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; + q_data->sizeimage = f->fmt.pix.sizeimage; + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "Setting format for type %d, wxh: %dx%d, fmt: %d\n", + f->type, q_data->width, q_data->height, q_data->fmt->fourcc); + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(fh_to_ctx(priv), f); +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); + if (ret) + return ret; + + ret = vidioc_s_fmt(ctx, f); + if (ret) + ctx->colorspace = f->fmt.pix.colorspace; + + return ret; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *create) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_create_bufs(file, ctx->m2m_ctx, create); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static const struct v4l2_ioctl_ops coda_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vidioc_g_fmt, + .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_create_bufs = vidioc_create_bufs, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + +/* + * Mem-to-mem operations. + */ +static void coda_device_run(void *m2m_priv) +{ + struct coda_ctx *ctx = m2m_priv; + struct coda_q_data *q_data_src, *q_data_dst; + struct vb2_buffer *src_buf, *dst_buf; + struct coda_dev *dev = ctx->dev; + int force_ipicture; + int quant_param = 0; + u32 picture_y, picture_cb, picture_cr; + u32 pic_stream_buffer_addr, pic_stream_buffer_size; + u32 dst_fourcc; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + dst_fourcc = q_data_dst->fmt->fourcc; + + src_buf->v4l2_buf.sequence = ctx->isequence; + dst_buf->v4l2_buf.sequence = ctx->isequence; + ctx->isequence++; + + /* + * Workaround coda firmware BUG that only marks the first + * frame as IDR. This is a problem for some decoders that can't + * recover when a frame is lost. + */ + if (src_buf->v4l2_buf.sequence % ctx->params.gop_size) { + src_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME; + src_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_KEYFRAME; + } else { + src_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME; + src_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_PFRAME; + } + + /* + * Copy headers at the beginning of the first frame for H.264 only. + * In MPEG4 they are already copied by the coda. + */ + if (src_buf->v4l2_buf.sequence == 0) { + pic_stream_buffer_addr = + vb2_dma_contig_plane_dma_addr(dst_buf, 0) + + ctx->vpu_header_size[0] + + ctx->vpu_header_size[1] + + ctx->vpu_header_size[2]; + pic_stream_buffer_size = CODA_MAX_FRAME_SIZE - + ctx->vpu_header_size[0] - + ctx->vpu_header_size[1] - + ctx->vpu_header_size[2]; + memcpy(vb2_plane_vaddr(dst_buf, 0), + &ctx->vpu_header[0][0], ctx->vpu_header_size[0]); + memcpy(vb2_plane_vaddr(dst_buf, 0) + ctx->vpu_header_size[0], + &ctx->vpu_header[1][0], ctx->vpu_header_size[1]); + memcpy(vb2_plane_vaddr(dst_buf, 0) + ctx->vpu_header_size[0] + + ctx->vpu_header_size[1], &ctx->vpu_header[2][0], + ctx->vpu_header_size[2]); + } else { + pic_stream_buffer_addr = + vb2_dma_contig_plane_dma_addr(dst_buf, 0); + pic_stream_buffer_size = CODA_MAX_FRAME_SIZE; + } + + if (src_buf->v4l2_buf.flags & V4L2_BUF_FLAG_KEYFRAME) { + force_ipicture = 1; + switch (dst_fourcc) { + case V4L2_PIX_FMT_H264: + quant_param = ctx->params.h264_intra_qp; + break; + case V4L2_PIX_FMT_MPEG4: + quant_param = ctx->params.mpeg4_intra_qp; + break; + default: + v4l2_warn(&ctx->dev->v4l2_dev, + "cannot set intra qp, fmt not supported\n"); + break; + } + } else { + force_ipicture = 0; + switch (dst_fourcc) { + case V4L2_PIX_FMT_H264: + quant_param = ctx->params.h264_inter_qp; + break; + case V4L2_PIX_FMT_MPEG4: + quant_param = ctx->params.mpeg4_inter_qp; + break; + default: + v4l2_warn(&ctx->dev->v4l2_dev, + "cannot set inter qp, fmt not supported\n"); + break; + } + } + + /* submit */ + coda_write(dev, CODA_ROT_MIR_ENABLE | ctx->params.rot_mode, CODA_CMD_ENC_PIC_ROT_MODE); + coda_write(dev, quant_param, CODA_CMD_ENC_PIC_QS); + + + picture_y = vb2_dma_contig_plane_dma_addr(src_buf, 0); + picture_cb = picture_y + q_data_src->width * q_data_src->height; + picture_cr = picture_cb + q_data_src->width / 2 * + q_data_src->height / 2; + + coda_write(dev, picture_y, CODA_CMD_ENC_PIC_SRC_ADDR_Y); + coda_write(dev, picture_cb, CODA_CMD_ENC_PIC_SRC_ADDR_CB); + coda_write(dev, picture_cr, CODA_CMD_ENC_PIC_SRC_ADDR_CR); + coda_write(dev, force_ipicture << 1 & 0x2, + CODA_CMD_ENC_PIC_OPTION); + + coda_write(dev, pic_stream_buffer_addr, CODA_CMD_ENC_PIC_BB_START); + coda_write(dev, pic_stream_buffer_size / 1024, + CODA_CMD_ENC_PIC_BB_SIZE); + + if (dev->devtype->product == CODA_7541) { + coda_write(dev, CODA7_USE_BIT_ENABLE | CODA7_USE_HOST_BIT_ENABLE | + CODA7_USE_ME_ENABLE | CODA7_USE_HOST_ME_ENABLE, + CODA7_REG_BIT_AXI_SRAM_USE); + } + + /* 1 second timeout in case CODA locks up */ + schedule_delayed_work(&dev->timeout, HZ); + + INIT_COMPLETION(dev->done); + coda_command_async(ctx, CODA_COMMAND_PIC_RUN); +} + +static int coda_job_ready(void *m2m_priv) +{ + struct coda_ctx *ctx = m2m_priv; + + /* + * For both 'P' and 'key' frame cases 1 picture + * and 1 frame are needed. + */ + if (!v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx) || + !v4l2_m2m_num_dst_bufs_ready(ctx->m2m_ctx)) { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "not ready: not enough video buffers.\n"); + return 0; + } + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "job ready\n"); + return 1; +} + +static void coda_job_abort(void *priv) +{ + struct coda_ctx *ctx = priv; + struct coda_dev *dev = ctx->dev; + + ctx->aborting = 1; + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "Aborting task\n"); + + v4l2_m2m_job_finish(dev->m2m_dev, ctx->m2m_ctx); +} + +static void coda_lock(void *m2m_priv) +{ + struct coda_ctx *ctx = m2m_priv; + struct coda_dev *pcdev = ctx->dev; + mutex_lock(&pcdev->dev_mutex); +} + +static void coda_unlock(void *m2m_priv) +{ + struct coda_ctx *ctx = m2m_priv; + struct coda_dev *pcdev = ctx->dev; + mutex_unlock(&pcdev->dev_mutex); +} + +static struct v4l2_m2m_ops coda_m2m_ops = { + .device_run = coda_device_run, + .job_ready = coda_job_ready, + .job_abort = coda_job_abort, + .lock = coda_lock, + .unlock = coda_unlock, +}; + +static void set_default_params(struct coda_ctx *ctx) +{ + struct coda_dev *dev = ctx->dev; + + ctx->params.codec_mode = CODA_MODE_INVALID; + ctx->colorspace = V4L2_COLORSPACE_REC709; + ctx->params.framerate = 30; + ctx->aborting = 0; + + /* Default formats for output and input queues */ + ctx->q_data[V4L2_M2M_SRC].fmt = &dev->devtype->formats[0]; + ctx->q_data[V4L2_M2M_DST].fmt = &dev->devtype->formats[1]; + ctx->q_data[V4L2_M2M_SRC].width = MAX_W; + ctx->q_data[V4L2_M2M_SRC].height = MAX_H; + ctx->q_data[V4L2_M2M_SRC].sizeimage = (MAX_W * MAX_H * 3) / 2; + ctx->q_data[V4L2_M2M_DST].width = MAX_W; + ctx->q_data[V4L2_M2M_DST].height = MAX_H; + ctx->q_data[V4L2_M2M_DST].sizeimage = CODA_MAX_FRAME_SIZE; +} + +/* + * Queue operations + */ +static int coda_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(vq); + struct coda_q_data *q_data; + unsigned int size; + + q_data = get_q_data(ctx, vq->type); + size = q_data->sizeimage; + + *nplanes = 1; + sizes[0] = size; + + alloc_ctxs[0] = ctx->dev->alloc_ctx; + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "get %d buffer(s) of size %d each.\n", *nbuffers, size); + + return 0; +} + +static int coda_buf_prepare(struct vb2_buffer *vb) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct coda_q_data *q_data; + + q_data = get_q_data(ctx, vb->vb2_queue->type); + + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + v4l2_warn(&ctx->dev->v4l2_dev, + "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), + (long)q_data->sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + + return 0; +} + +static void coda_buf_queue(struct vb2_buffer *vb) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static void coda_wait_prepare(struct vb2_queue *q) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(q); + coda_unlock(ctx); +} + +static void coda_wait_finish(struct vb2_queue *q) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(q); + coda_lock(ctx); +} + +static void coda_free_framebuffers(struct coda_ctx *ctx) +{ + int i; + + for (i = 0; i < CODA_MAX_FRAMEBUFFERS; i++) { + if (ctx->internal_frames[i].vaddr) { + dma_free_coherent(&ctx->dev->plat_dev->dev, + ctx->internal_frames[i].size, + ctx->internal_frames[i].vaddr, + ctx->internal_frames[i].paddr); + ctx->internal_frames[i].vaddr = NULL; + } + } +} + +static int coda_alloc_framebuffers(struct coda_ctx *ctx, struct coda_q_data *q_data, u32 fourcc) +{ + struct coda_dev *dev = ctx->dev; + + int height = q_data->height; + int width = q_data->width; + u32 *p; + int i; + + /* Allocate frame buffers */ + ctx->num_internal_frames = CODA_MAX_FRAMEBUFFERS; + for (i = 0; i < ctx->num_internal_frames; i++) { + ctx->internal_frames[i].size = q_data->sizeimage; + if (fourcc == V4L2_PIX_FMT_H264 && dev->devtype->product != CODA_DX6) + ctx->internal_frames[i].size += width / 2 * height / 2; + ctx->internal_frames[i].vaddr = dma_alloc_coherent( + &dev->plat_dev->dev, ctx->internal_frames[i].size, + &ctx->internal_frames[i].paddr, GFP_KERNEL); + if (!ctx->internal_frames[i].vaddr) { + coda_free_framebuffers(ctx); + return -ENOMEM; + } + } + + /* Register frame buffers in the parameter buffer */ + p = ctx->parabuf.vaddr; + + if (dev->devtype->product == CODA_DX6) { + for (i = 0; i < ctx->num_internal_frames; i++) { + p[i * 3] = ctx->internal_frames[i].paddr; /* Y */ + p[i * 3 + 1] = p[i * 3] + width * height; /* Cb */ + p[i * 3 + 2] = p[i * 3 + 1] + width / 2 * height / 2; /* Cr */ + } + } else { + for (i = 0; i < ctx->num_internal_frames; i += 2) { + p[i * 3 + 1] = ctx->internal_frames[i].paddr; /* Y */ + p[i * 3] = p[i * 3 + 1] + width * height; /* Cb */ + p[i * 3 + 3] = p[i * 3] + (width / 2) * (height / 2); /* Cr */ + + if (fourcc == V4L2_PIX_FMT_H264) + p[96 + i + 1] = p[i * 3 + 3] + (width / 2) * (height / 2); + + if (i + 1 < ctx->num_internal_frames) { + p[i * 3 + 2] = ctx->internal_frames[i+1].paddr; /* Y */ + p[i * 3 + 5] = p[i * 3 + 2] + width * height ; /* Cb */ + p[i * 3 + 4] = p[i * 3 + 5] + (width / 2) * (height / 2); /* Cr */ + + if (fourcc == V4L2_PIX_FMT_H264) + p[96 + i] = p[i * 3 + 4] + (width / 2) * (height / 2); + } + } + } + + return 0; +} + +static int coda_h264_padding(int size, char *p) +{ + int nal_size; + int diff; + + diff = size - (size & ~0x7); + if (diff == 0) + return 0; + + nal_size = coda_filler_size[diff]; + memcpy(p, coda_filler_nal, nal_size); + + /* Add rbsp stop bit and trailing at the end */ + *(p + nal_size - 1) = 0x80; + + return nal_size; +} + +static int coda_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(q); + struct v4l2_device *v4l2_dev = &ctx->dev->v4l2_dev; + u32 bitstream_buf, bitstream_size; + struct coda_dev *dev = ctx->dev; + struct coda_q_data *q_data_src, *q_data_dst; + struct vb2_buffer *buf; + u32 dst_fourcc; + u32 value; + int ret; + + if (count < 1) + return -EINVAL; + + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + ctx->rawstreamon = 1; + else + ctx->compstreamon = 1; + + /* Don't start the coda unless both queues are on */ + if (!(ctx->rawstreamon & ctx->compstreamon)) + return 0; + + if (coda_isbusy(dev)) + if (wait_for_completion_interruptible_timeout(&dev->done, HZ) <= 0) + return -EBUSY; + + ctx->gopcounter = ctx->params.gop_size - 1; + + q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + bitstream_buf = vb2_dma_contig_plane_dma_addr(buf, 0); + q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + bitstream_size = q_data_dst->sizeimage; + dst_fourcc = q_data_dst->fmt->fourcc; + + /* Find out whether coda must encode or decode */ + if (q_data_src->fmt->type == CODA_FMT_RAW && + q_data_dst->fmt->type == CODA_FMT_ENC) { + ctx->inst_type = CODA_INST_ENCODER; + } else if (q_data_src->fmt->type == CODA_FMT_ENC && + q_data_dst->fmt->type == CODA_FMT_RAW) { + ctx->inst_type = CODA_INST_DECODER; + v4l2_err(v4l2_dev, "decoding not supported.\n"); + return -EINVAL; + } else { + v4l2_err(v4l2_dev, "couldn't tell instance type.\n"); + return -EINVAL; + } + + if (!coda_is_initialized(dev)) { + v4l2_err(v4l2_dev, "coda is not initialized.\n"); + return -EFAULT; + } + coda_write(dev, ctx->parabuf.paddr, CODA_REG_BIT_PARA_BUF_ADDR); + coda_write(dev, bitstream_buf, CODA_REG_BIT_RD_PTR(ctx->idx)); + coda_write(dev, bitstream_buf, CODA_REG_BIT_WR_PTR(ctx->idx)); + switch (dev->devtype->product) { + case CODA_DX6: + coda_write(dev, CODADX6_STREAM_BUF_DYNALLOC_EN | + CODADX6_STREAM_BUF_PIC_RESET, CODA_REG_BIT_STREAM_CTRL); + break; + default: + coda_write(dev, CODA7_STREAM_BUF_DYNALLOC_EN | + CODA7_STREAM_BUF_PIC_RESET, CODA_REG_BIT_STREAM_CTRL); + } + + if (dev->devtype->product == CODA_DX6) { + /* Configure the coda */ + coda_write(dev, dev->iram_paddr, CODADX6_REG_BIT_SEARCH_RAM_BASE_ADDR); + } + + /* Could set rotation here if needed */ + switch (dev->devtype->product) { + case CODA_DX6: + value = (q_data_src->width & CODADX6_PICWIDTH_MASK) << CODADX6_PICWIDTH_OFFSET; + break; + default: + value = (q_data_src->width & CODA7_PICWIDTH_MASK) << CODA7_PICWIDTH_OFFSET; + } + value |= (q_data_src->height & CODA_PICHEIGHT_MASK) << CODA_PICHEIGHT_OFFSET; + coda_write(dev, value, CODA_CMD_ENC_SEQ_SRC_SIZE); + coda_write(dev, ctx->params.framerate, + CODA_CMD_ENC_SEQ_SRC_F_RATE); + + switch (dst_fourcc) { + case V4L2_PIX_FMT_MPEG4: + if (dev->devtype->product == CODA_DX6) + ctx->params.codec_mode = CODADX6_MODE_ENCODE_MP4; + else + ctx->params.codec_mode = CODA7_MODE_ENCODE_MP4; + + coda_write(dev, CODA_STD_MPEG4, CODA_CMD_ENC_SEQ_COD_STD); + coda_write(dev, 0, CODA_CMD_ENC_SEQ_MP4_PARA); + break; + case V4L2_PIX_FMT_H264: + if (dev->devtype->product == CODA_DX6) + ctx->params.codec_mode = CODADX6_MODE_ENCODE_H264; + else + ctx->params.codec_mode = CODA7_MODE_ENCODE_H264; + + coda_write(dev, CODA_STD_H264, CODA_CMD_ENC_SEQ_COD_STD); + coda_write(dev, 0, CODA_CMD_ENC_SEQ_264_PARA); + break; + default: + v4l2_err(v4l2_dev, + "dst format (0x%08x) invalid.\n", dst_fourcc); + return -EINVAL; + } + + switch (ctx->params.slice_mode) { + case V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE: + value = 0; + break; + case V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB: + value = (ctx->params.slice_max_mb & CODA_SLICING_SIZE_MASK) << CODA_SLICING_SIZE_OFFSET; + value |= (1 & CODA_SLICING_UNIT_MASK) << CODA_SLICING_UNIT_OFFSET; + value |= 1 & CODA_SLICING_MODE_MASK; + break; + case V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES: + value = (ctx->params.slice_max_bits & CODA_SLICING_SIZE_MASK) << CODA_SLICING_SIZE_OFFSET; + value |= (0 & CODA_SLICING_UNIT_MASK) << CODA_SLICING_UNIT_OFFSET; + value |= 1 & CODA_SLICING_MODE_MASK; + break; + } + coda_write(dev, value, CODA_CMD_ENC_SEQ_SLICE_MODE); + value = ctx->params.gop_size & CODA_GOP_SIZE_MASK; + coda_write(dev, value, CODA_CMD_ENC_SEQ_GOP_SIZE); + + if (ctx->params.bitrate) { + /* Rate control enabled */ + value = (ctx->params.bitrate & CODA_RATECONTROL_BITRATE_MASK) << CODA_RATECONTROL_BITRATE_OFFSET; + value |= 1 & CODA_RATECONTROL_ENABLE_MASK; + } else { + value = 0; + } + coda_write(dev, value, CODA_CMD_ENC_SEQ_RC_PARA); + + coda_write(dev, 0, CODA_CMD_ENC_SEQ_RC_BUF_SIZE); + coda_write(dev, 0, CODA_CMD_ENC_SEQ_INTRA_REFRESH); + + coda_write(dev, bitstream_buf, CODA_CMD_ENC_SEQ_BB_START); + coda_write(dev, bitstream_size / 1024, CODA_CMD_ENC_SEQ_BB_SIZE); + + /* set default gamma */ + value = (CODA_DEFAULT_GAMMA & CODA_GAMMA_MASK) << CODA_GAMMA_OFFSET; + coda_write(dev, value, CODA_CMD_ENC_SEQ_RC_GAMMA); + + value = (CODA_DEFAULT_GAMMA > 0) << CODA_OPTION_GAMMA_OFFSET; + value |= (0 & CODA_OPTION_SLICEREPORT_MASK) << CODA_OPTION_SLICEREPORT_OFFSET; + coda_write(dev, value, CODA_CMD_ENC_SEQ_OPTION); + + if (dst_fourcc == V4L2_PIX_FMT_H264) { + value = (FMO_SLICE_SAVE_BUF_SIZE << 7); + value |= (0 & CODA_FMOPARAM_TYPE_MASK) << CODA_FMOPARAM_TYPE_OFFSET; + value |= 0 & CODA_FMOPARAM_SLICENUM_MASK; + if (dev->devtype->product == CODA_DX6) { + coda_write(dev, value, CODADX6_CMD_ENC_SEQ_FMO); + } else { + coda_write(dev, dev->iram_paddr, CODA7_CMD_ENC_SEQ_SEARCH_BASE); + coda_write(dev, 48 * 1024, CODA7_CMD_ENC_SEQ_SEARCH_SIZE); + } + } + + if (coda_command_sync(ctx, CODA_COMMAND_SEQ_INIT)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_SEQ_INIT timeout\n"); + return -ETIMEDOUT; + } + + if (coda_read(dev, CODA_RET_ENC_SEQ_SUCCESS) == 0) + return -EFAULT; + + ret = coda_alloc_framebuffers(ctx, q_data_src, dst_fourcc); + if (ret < 0) + return ret; + + coda_write(dev, ctx->num_internal_frames, CODA_CMD_SET_FRAME_BUF_NUM); + coda_write(dev, round_up(q_data_src->width, 8), CODA_CMD_SET_FRAME_BUF_STRIDE); + if (dev->devtype->product != CODA_DX6) { + coda_write(dev, round_up(q_data_src->width, 8), CODA7_CMD_SET_FRAME_SOURCE_BUF_STRIDE); + coda_write(dev, dev->iram_paddr + 48 * 1024, CODA7_CMD_SET_FRAME_AXI_DBKY_ADDR); + coda_write(dev, dev->iram_paddr + 53 * 1024, CODA7_CMD_SET_FRAME_AXI_DBKC_ADDR); + coda_write(dev, dev->iram_paddr + 58 * 1024, CODA7_CMD_SET_FRAME_AXI_BIT_ADDR); + coda_write(dev, dev->iram_paddr + 68 * 1024, CODA7_CMD_SET_FRAME_AXI_IPACDC_ADDR); + coda_write(dev, 0x0, CODA7_CMD_SET_FRAME_AXI_OVL_ADDR); + } + if (coda_command_sync(ctx, CODA_COMMAND_SET_FRAME_BUF)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_SET_FRAME_BUF timeout\n"); + return -ETIMEDOUT; + } + + /* Save stream headers */ + buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + switch (dst_fourcc) { + case V4L2_PIX_FMT_H264: + /* + * Get SPS in the first frame and copy it to an + * intermediate buffer. + */ + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_H264_SPS, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER timeout\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[0] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[0][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[0]); + + /* + * Get PPS in the first frame and copy it to an + * intermediate buffer. + */ + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_H264_PPS, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER timeout\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[1] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[1][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[1]); + /* + * Length of H.264 headers is variable and thus it might not be + * aligned for the coda to append the encoded frame. In that is + * the case a filler NAL must be added to header 2. + */ + ctx->vpu_header_size[2] = coda_h264_padding( + (ctx->vpu_header_size[0] + + ctx->vpu_header_size[1]), + ctx->vpu_header[2]); + break; + case V4L2_PIX_FMT_MPEG4: + /* + * Get VOS in the first frame and copy it to an + * intermediate buffer + */ + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_MP4V_VOS, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER timeout\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[0] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[0][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[0]); + + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_MP4V_VIS, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER failed\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[1] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[1][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[1]); + + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_MP4V_VOL, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER failed\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[2] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[2][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[2]); + break; + default: + /* No more formats need to save headers at the moment */ + break; + } + + return 0; +} + +static int coda_stop_streaming(struct vb2_queue *q) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(q); + struct coda_dev *dev = ctx->dev; + + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "%s: output\n", __func__); + ctx->rawstreamon = 0; + } else { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "%s: capture\n", __func__); + ctx->compstreamon = 0; + } + + /* Don't stop the coda unless both queues are off */ + if (ctx->rawstreamon || ctx->compstreamon) + return 0; + + if (coda_isbusy(dev)) { + if (wait_for_completion_interruptible_timeout(&dev->done, HZ) <= 0) { + v4l2_warn(&dev->v4l2_dev, + "%s: timeout, sending SEQ_END anyway\n", __func__); + } + } + + cancel_delayed_work(&dev->timeout); + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, + "%s: sent command 'SEQ_END' to coda\n", __func__); + if (coda_command_sync(ctx, CODA_COMMAND_SEQ_END)) { + v4l2_err(&dev->v4l2_dev, + "CODA_COMMAND_SEQ_END failed\n"); + return -ETIMEDOUT; + } + + coda_free_framebuffers(ctx); + + return 0; +} + +static struct vb2_ops coda_qops = { + .queue_setup = coda_queue_setup, + .buf_prepare = coda_buf_prepare, + .buf_queue = coda_buf_queue, + .wait_prepare = coda_wait_prepare, + .wait_finish = coda_wait_finish, + .start_streaming = coda_start_streaming, + .stop_streaming = coda_stop_streaming, +}; + +static int coda_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct coda_ctx *ctx = + container_of(ctrl->handler, struct coda_ctx, ctrls); + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "s_ctrl: id = %d, val = %d\n", ctrl->id, ctrl->val); + + switch (ctrl->id) { + case V4L2_CID_HFLIP: + if (ctrl->val) + ctx->params.rot_mode |= CODA_MIR_HOR; + else + ctx->params.rot_mode &= ~CODA_MIR_HOR; + break; + case V4L2_CID_VFLIP: + if (ctrl->val) + ctx->params.rot_mode |= CODA_MIR_VER; + else + ctx->params.rot_mode &= ~CODA_MIR_VER; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + ctx->params.bitrate = ctrl->val / 1000; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + ctx->params.gop_size = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP: + ctx->params.h264_intra_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP: + ctx->params.h264_inter_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP: + ctx->params.mpeg4_intra_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP: + ctx->params.mpeg4_inter_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE: + ctx->params.slice_mode = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB: + ctx->params.slice_max_mb = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES: + ctx->params.slice_max_bits = ctrl->val * 8; + break; + case V4L2_CID_MPEG_VIDEO_HEADER_MODE: + break; + default: + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "Invalid control, id=%d, val=%d\n", + ctrl->id, ctrl->val); + return -EINVAL; + } + + return 0; +} + +static struct v4l2_ctrl_ops coda_ctrl_ops = { + .s_ctrl = coda_s_ctrl, +}; + +static int coda_ctrls_setup(struct coda_ctx *ctx) +{ + v4l2_ctrl_handler_init(&ctx->ctrls, 9); + + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_BITRATE, 0, 32767000, 1, 0); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_GOP_SIZE, 1, 60, 1, 16); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP, 1, 51, 1, 25); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP, 1, 51, 1, 25); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP, 1, 31, 1, 2); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP, 1, 31, 1, 2); + v4l2_ctrl_new_std_menu(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE, + V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES, 0x0, + V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB, 1, 0x3fffffff, 1, 1); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES, 1, 0x3fffffff, 1, 500); + v4l2_ctrl_new_std_menu(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_HEADER_MODE, + V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME, + (1 << V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE), + V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME); + + if (ctx->ctrls.error) { + v4l2_err(&ctx->dev->v4l2_dev, "control initialization error (%d)", + ctx->ctrls.error); + return -EINVAL; + } + + return v4l2_ctrl_handler_setup(&ctx->ctrls); +} + +static int coda_queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct coda_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &coda_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &coda_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + return vb2_queue_init(dst_vq); +} + +static int coda_next_free_instance(struct coda_dev *dev) +{ + return ffz(dev->instance_mask); +} + +static int coda_open(struct file *file) +{ + struct coda_dev *dev = video_drvdata(file); + struct coda_ctx *ctx = NULL; + int ret = 0; + int idx; + + idx = coda_next_free_instance(dev); + if (idx >= CODA_MAX_INSTANCES) + return -EBUSY; + set_bit(idx, &dev->instance_mask); + + ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + v4l2_fh_init(&ctx->fh, video_devdata(file)); + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + ctx->dev = dev; + ctx->idx = idx; + + set_default_params(ctx); + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, + &coda_queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + int ret = PTR_ERR(ctx->m2m_ctx); + + v4l2_err(&dev->v4l2_dev, "%s return error (%d)\n", + __func__, ret); + goto err; + } + ret = coda_ctrls_setup(ctx); + if (ret) { + v4l2_err(&dev->v4l2_dev, "failed to setup coda controls\n"); + goto err; + } + + ctx->fh.ctrl_handler = &ctx->ctrls; + + ctx->parabuf.vaddr = dma_alloc_coherent(&dev->plat_dev->dev, + CODA_PARA_BUF_SIZE, &ctx->parabuf.paddr, GFP_KERNEL); + if (!ctx->parabuf.vaddr) { + v4l2_err(&dev->v4l2_dev, "failed to allocate parabuf"); + ret = -ENOMEM; + goto err; + } + + coda_lock(ctx); + list_add(&ctx->list, &dev->instances); + coda_unlock(ctx); + + clk_prepare_enable(dev->clk_per); + clk_prepare_enable(dev->clk_ahb); + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, "Created instance %d (%p)\n", + ctx->idx, ctx); + + return 0; + +err: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + return ret; +} + +static int coda_release(struct file *file) +{ + struct coda_dev *dev = video_drvdata(file); + struct coda_ctx *ctx = fh_to_ctx(file->private_data); + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, "Releasing instance %p\n", + ctx); + + coda_lock(ctx); + list_del(&ctx->list); + coda_unlock(ctx); + + dma_free_coherent(&dev->plat_dev->dev, CODA_PARA_BUF_SIZE, + ctx->parabuf.vaddr, ctx->parabuf.paddr); + v4l2_m2m_ctx_release(ctx->m2m_ctx); + v4l2_ctrl_handler_free(&ctx->ctrls); + clk_disable_unprepare(dev->clk_per); + clk_disable_unprepare(dev->clk_ahb); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + clear_bit(ctx->idx, &dev->instance_mask); + kfree(ctx); + + return 0; +} + +static unsigned int coda_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct coda_ctx *ctx = fh_to_ctx(file->private_data); + int ret; + + coda_lock(ctx); + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + coda_unlock(ctx); + return ret; +} + +static int coda_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct coda_ctx *ctx = fh_to_ctx(file->private_data); + + return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); +} + +static const struct v4l2_file_operations coda_fops = { + .owner = THIS_MODULE, + .open = coda_open, + .release = coda_release, + .poll = coda_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = coda_mmap, +}; + +static irqreturn_t coda_irq_handler(int irq, void *data) +{ + struct vb2_buffer *src_buf, *dst_buf; + struct coda_dev *dev = data; + u32 wr_ptr, start_ptr; + struct coda_ctx *ctx; + + cancel_delayed_work(&dev->timeout); + + /* read status register to attend the IRQ */ + coda_read(dev, CODA_REG_BIT_INT_STATUS); + coda_write(dev, CODA_REG_BIT_INT_CLEAR_SET, + CODA_REG_BIT_INT_CLEAR); + + ctx = v4l2_m2m_get_curr_priv(dev->m2m_dev); + if (ctx == NULL) { + v4l2_err(&dev->v4l2_dev, "Instance released before the end of transaction\n"); + return IRQ_HANDLED; + } + + if (ctx->aborting) { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "task has been aborted\n"); + return IRQ_HANDLED; + } + + if (coda_isbusy(ctx->dev)) { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "coda is still busy!!!!\n"); + return IRQ_NONE; + } + + complete(&dev->done); + + src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + + /* Get results from the coda */ + coda_read(dev, CODA_RET_ENC_PIC_TYPE); + start_ptr = coda_read(dev, CODA_CMD_ENC_PIC_BB_START); + wr_ptr = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)); + /* Calculate bytesused field */ + if (dst_buf->v4l2_buf.sequence == 0) { + dst_buf->v4l2_planes[0].bytesused = (wr_ptr - start_ptr) + + ctx->vpu_header_size[0] + + ctx->vpu_header_size[1] + + ctx->vpu_header_size[2]; + } else { + dst_buf->v4l2_planes[0].bytesused = (wr_ptr - start_ptr); + } + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, "frame size = %u\n", + wr_ptr - start_ptr); + + coda_read(dev, CODA_RET_ENC_PIC_SLICE_NUM); + coda_read(dev, CODA_RET_ENC_PIC_FLAG); + + if (src_buf->v4l2_buf.flags & V4L2_BUF_FLAG_KEYFRAME) { + dst_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME; + dst_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_PFRAME; + } else { + dst_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME; + dst_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_KEYFRAME; + } + + dst_buf->v4l2_buf.timestamp = src_buf->v4l2_buf.timestamp; + dst_buf->v4l2_buf.timecode = src_buf->v4l2_buf.timecode; + + v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE); + + ctx->gopcounter--; + if (ctx->gopcounter < 0) + ctx->gopcounter = ctx->params.gop_size - 1; + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, + "job finished: encoding frame (%d) (%s)\n", + dst_buf->v4l2_buf.sequence, + (dst_buf->v4l2_buf.flags & V4L2_BUF_FLAG_KEYFRAME) ? + "KEYFRAME" : "PFRAME"); + + v4l2_m2m_job_finish(ctx->dev->m2m_dev, ctx->m2m_ctx); + + return IRQ_HANDLED; +} + +static void coda_timeout(struct work_struct *work) +{ + struct coda_ctx *ctx; + struct coda_dev *dev = container_of(to_delayed_work(work), + struct coda_dev, timeout); + + if (completion_done(&dev->done)) + return; + + complete(&dev->done); + + v4l2_err(&dev->v4l2_dev, "CODA PIC_RUN timeout, stopping all streams\n"); + + mutex_lock(&dev->dev_mutex); + list_for_each_entry(ctx, &dev->instances, list) { + v4l2_m2m_streamoff(NULL, ctx->m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + v4l2_m2m_streamoff(NULL, ctx->m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + } + mutex_unlock(&dev->dev_mutex); +} + +static u32 coda_supported_firmwares[] = { + CODA_FIRMWARE_VERNUM(CODA_DX6, 2, 2, 5), + CODA_FIRMWARE_VERNUM(CODA_7541, 13, 4, 29), +}; + +static bool coda_firmware_supported(u32 vernum) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(coda_supported_firmwares); i++) + if (vernum == coda_supported_firmwares[i]) + return true; + return false; +} + +static char *coda_product_name(int product) +{ + static char buf[9]; + + switch (product) { + case CODA_DX6: + return "CodaDx6"; + case CODA_7541: + return "CODA7541"; + default: + snprintf(buf, sizeof(buf), "(0x%04x)", product); + return buf; + } +} + +static int coda_hw_init(struct coda_dev *dev) +{ + u16 product, major, minor, release; + u32 data; + u16 *p; + int i; + + clk_prepare_enable(dev->clk_per); + clk_prepare_enable(dev->clk_ahb); + + /* + * Copy the first CODA_ISRAM_SIZE in the internal SRAM. + * The 16-bit chars in the code buffer are in memory access + * order, re-sort them to CODA order for register download. + * Data in this SRAM survives a reboot. + */ + p = (u16 *)dev->codebuf.vaddr; + if (dev->devtype->product == CODA_DX6) { + for (i = 0; i < (CODA_ISRAM_SIZE / 2); i++) { + data = CODA_DOWN_ADDRESS_SET(i) | + CODA_DOWN_DATA_SET(p[i ^ 1]); + coda_write(dev, data, CODA_REG_BIT_CODE_DOWN); + } + } else { + for (i = 0; i < (CODA_ISRAM_SIZE / 2); i++) { + data = CODA_DOWN_ADDRESS_SET(i) | + CODA_DOWN_DATA_SET(p[round_down(i, 4) + + 3 - (i % 4)]); + coda_write(dev, data, CODA_REG_BIT_CODE_DOWN); + } + } + + /* Tell the BIT where to find everything it needs */ + coda_write(dev, dev->workbuf.paddr, + CODA_REG_BIT_WORK_BUF_ADDR); + coda_write(dev, dev->codebuf.paddr, + CODA_REG_BIT_CODE_BUF_ADDR); + coda_write(dev, 0, CODA_REG_BIT_CODE_RUN); + + /* Set default values */ + switch (dev->devtype->product) { + case CODA_DX6: + coda_write(dev, CODADX6_STREAM_BUF_PIC_FLUSH, CODA_REG_BIT_STREAM_CTRL); + break; + default: + coda_write(dev, CODA7_STREAM_BUF_PIC_FLUSH, CODA_REG_BIT_STREAM_CTRL); + } + coda_write(dev, 0, CODA_REG_BIT_FRAME_MEM_CTRL); + + if (dev->devtype->product != CODA_DX6) + coda_write(dev, 0, CODA7_REG_BIT_AXI_SRAM_USE); + + coda_write(dev, CODA_INT_INTERRUPT_ENABLE, + CODA_REG_BIT_INT_ENABLE); + + /* Reset VPU and start processor */ + data = coda_read(dev, CODA_REG_BIT_CODE_RESET); + data |= CODA_REG_RESET_ENABLE; + coda_write(dev, data, CODA_REG_BIT_CODE_RESET); + udelay(10); + data &= ~CODA_REG_RESET_ENABLE; + coda_write(dev, data, CODA_REG_BIT_CODE_RESET); + coda_write(dev, CODA_REG_RUN_ENABLE, CODA_REG_BIT_CODE_RUN); + + /* Load firmware */ + coda_write(dev, 0, CODA_CMD_FIRMWARE_VERNUM); + coda_write(dev, CODA_REG_BIT_BUSY_FLAG, CODA_REG_BIT_BUSY); + coda_write(dev, 0, CODA_REG_BIT_RUN_INDEX); + coda_write(dev, 0, CODA_REG_BIT_RUN_COD_STD); + coda_write(dev, CODA_COMMAND_FIRMWARE_GET, CODA_REG_BIT_RUN_COMMAND); + if (coda_wait_timeout(dev)) { + clk_disable_unprepare(dev->clk_per); + clk_disable_unprepare(dev->clk_ahb); + v4l2_err(&dev->v4l2_dev, "firmware get command error\n"); + return -EIO; + } + + /* Check we are compatible with the loaded firmware */ + data = coda_read(dev, CODA_CMD_FIRMWARE_VERNUM); + product = CODA_FIRMWARE_PRODUCT(data); + major = CODA_FIRMWARE_MAJOR(data); + minor = CODA_FIRMWARE_MINOR(data); + release = CODA_FIRMWARE_RELEASE(data); + + clk_disable_unprepare(dev->clk_per); + clk_disable_unprepare(dev->clk_ahb); + + if (product != dev->devtype->product) { + v4l2_err(&dev->v4l2_dev, "Wrong firmware. Hw: %s, Fw: %s," + " Version: %u.%u.%u\n", + coda_product_name(dev->devtype->product), + coda_product_name(product), major, minor, release); + return -EINVAL; + } + + v4l2_info(&dev->v4l2_dev, "Initialized %s.\n", + coda_product_name(product)); + + if (coda_firmware_supported(data)) { + v4l2_info(&dev->v4l2_dev, "Firmware version: %u.%u.%u\n", + major, minor, release); + } else { + v4l2_warn(&dev->v4l2_dev, "Unsupported firmware version: " + "%u.%u.%u\n", major, minor, release); + } + + return 0; +} + +static void coda_fw_callback(const struct firmware *fw, void *context) +{ + struct coda_dev *dev = context; + struct platform_device *pdev = dev->plat_dev; + int ret; + + if (!fw) { + v4l2_err(&dev->v4l2_dev, "firmware request failed\n"); + return; + } + + /* allocate auxiliary per-device code buffer for the BIT processor */ + dev->codebuf.size = fw->size; + dev->codebuf.vaddr = dma_alloc_coherent(&pdev->dev, fw->size, + &dev->codebuf.paddr, + GFP_KERNEL); + if (!dev->codebuf.vaddr) { + dev_err(&pdev->dev, "failed to allocate code buffer\n"); + return; + } + + /* Copy the whole firmware image to the code buffer */ + memcpy(dev->codebuf.vaddr, fw->data, fw->size); + release_firmware(fw); + + ret = coda_hw_init(dev); + if (ret) { + v4l2_err(&dev->v4l2_dev, "HW initialization failed\n"); + return; + } + + dev->vfd.fops = &coda_fops, + dev->vfd.ioctl_ops = &coda_ioctl_ops; + dev->vfd.release = video_device_release_empty, + dev->vfd.lock = &dev->dev_mutex; + dev->vfd.v4l2_dev = &dev->v4l2_dev; + dev->vfd.vfl_dir = VFL_DIR_M2M; + snprintf(dev->vfd.name, sizeof(dev->vfd.name), "%s", CODA_NAME); + video_set_drvdata(&dev->vfd, dev); + + dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(dev->alloc_ctx)) { + v4l2_err(&dev->v4l2_dev, "Failed to alloc vb2 context\n"); + return; + } + + dev->m2m_dev = v4l2_m2m_init(&coda_m2m_ops); + if (IS_ERR(dev->m2m_dev)) { + v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n"); + goto rel_ctx; + } + + ret = video_register_device(&dev->vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); + goto rel_m2m; + } + v4l2_info(&dev->v4l2_dev, "codec registered as /dev/video%d\n", + dev->vfd.num); + + return; + +rel_m2m: + v4l2_m2m_release(dev->m2m_dev); +rel_ctx: + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); +} + +static int coda_firmware_request(struct coda_dev *dev) +{ + char *fw = dev->devtype->firmware; + + dev_dbg(&dev->plat_dev->dev, "requesting firmware '%s' for %s\n", fw, + coda_product_name(dev->devtype->product)); + + return request_firmware_nowait(THIS_MODULE, true, + fw, &dev->plat_dev->dev, GFP_KERNEL, dev, coda_fw_callback); +} + +enum coda_platform { + CODA_IMX27, + CODA_IMX53, +}; + +static const struct coda_devtype coda_devdata[] = { + [CODA_IMX27] = { + .firmware = "v4l-codadx6-imx27.bin", + .product = CODA_DX6, + .formats = codadx6_formats, + .num_formats = ARRAY_SIZE(codadx6_formats), + }, + [CODA_IMX53] = { + .firmware = "v4l-coda7541-imx53.bin", + .product = CODA_7541, + .formats = coda7_formats, + .num_formats = ARRAY_SIZE(coda7_formats), + }, +}; + +static struct platform_device_id coda_platform_ids[] = { + { .name = "coda-imx27", .driver_data = CODA_IMX27 }, + { .name = "coda-imx53", .driver_data = CODA_IMX53 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, coda_platform_ids); + +#ifdef CONFIG_OF +static const struct of_device_id coda_dt_ids[] = { + { .compatible = "fsl,imx27-vpu", .data = &coda_devdata[CODA_IMX27] }, + { .compatible = "fsl,imx53-vpu", .data = &coda_devdata[CODA_IMX53] }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, coda_dt_ids); +#endif + +static int coda_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(of_match_ptr(coda_dt_ids), &pdev->dev); + const struct platform_device_id *pdev_id; + struct coda_platform_data *pdata = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; + struct gen_pool *pool; + struct coda_dev *dev; + struct resource *res; + int ret, irq; + + dev = devm_kzalloc(&pdev->dev, sizeof *dev, GFP_KERNEL); + if (!dev) { + dev_err(&pdev->dev, "Not enough memory for %s\n", + CODA_NAME); + return -ENOMEM; + } + + spin_lock_init(&dev->irqlock); + INIT_LIST_HEAD(&dev->instances); + INIT_DELAYED_WORK(&dev->timeout, coda_timeout); + init_completion(&dev->done); + complete(&dev->done); + + dev->plat_dev = pdev; + dev->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(dev->clk_per)) { + dev_err(&pdev->dev, "Could not get per clock\n"); + return PTR_ERR(dev->clk_per); + } + + dev->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(dev->clk_ahb)) { + dev_err(&pdev->dev, "Could not get ahb clock\n"); + return PTR_ERR(dev->clk_ahb); + } + + /* Get memory for physical registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get memory region resource\n"); + return -ENOENT; + } + + if (devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), CODA_NAME) == NULL) { + dev_err(&pdev->dev, "failed to request memory region\n"); + return -ENOENT; + } + dev->regs_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!dev->regs_base) { + dev_err(&pdev->dev, "failed to ioremap address region\n"); + return -ENOENT; + } + + /* IRQ */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get irq resource\n"); + return -ENOENT; + } + + if (devm_request_irq(&pdev->dev, irq, coda_irq_handler, + 0, CODA_NAME, dev) < 0) { + dev_err(&pdev->dev, "failed to request irq\n"); + return -ENOENT; + } + + /* Get IRAM pool from device tree or platform data */ + pool = of_get_named_gen_pool(np, "iram", 0); + if (!pool && pdata) + pool = dev_get_gen_pool(pdata->iram_dev); + if (!pool) { + dev_err(&pdev->dev, "iram pool not available\n"); + return -ENOMEM; + } + dev->iram_pool = pool; + + ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); + if (ret) + return ret; + + mutex_init(&dev->dev_mutex); + + pdev_id = of_id ? of_id->data : platform_get_device_id(pdev); + + if (of_id) { + dev->devtype = of_id->data; + } else if (pdev_id) { + dev->devtype = &coda_devdata[pdev_id->driver_data]; + } else { + v4l2_device_unregister(&dev->v4l2_dev); + return -EINVAL; + } + + /* allocate auxiliary per-device buffers for the BIT processor */ + switch (dev->devtype->product) { + case CODA_DX6: + dev->workbuf.size = CODADX6_WORK_BUF_SIZE; + break; + default: + dev->workbuf.size = CODA7_WORK_BUF_SIZE; + } + dev->workbuf.vaddr = dma_alloc_coherent(&pdev->dev, dev->workbuf.size, + &dev->workbuf.paddr, + GFP_KERNEL); + if (!dev->workbuf.vaddr) { + dev_err(&pdev->dev, "failed to allocate work buffer\n"); + v4l2_device_unregister(&dev->v4l2_dev); + return -ENOMEM; + } + + if (dev->devtype->product == CODA_DX6) + dev->iram_size = CODADX6_IRAM_SIZE; + else + dev->iram_size = CODA7_IRAM_SIZE; + dev->iram_vaddr = gen_pool_alloc(dev->iram_pool, dev->iram_size); + if (!dev->iram_vaddr) { + dev_err(&pdev->dev, "unable to alloc iram\n"); + return -ENOMEM; + } + dev->iram_paddr = gen_pool_virt_to_phys(dev->iram_pool, + dev->iram_vaddr); + + platform_set_drvdata(pdev, dev); + + return coda_firmware_request(dev); +} + +static int coda_remove(struct platform_device *pdev) +{ + struct coda_dev *dev = platform_get_drvdata(pdev); + + video_unregister_device(&dev->vfd); + if (dev->m2m_dev) + v4l2_m2m_release(dev->m2m_dev); + if (dev->alloc_ctx) + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); + v4l2_device_unregister(&dev->v4l2_dev); + if (dev->iram_vaddr) + gen_pool_free(dev->iram_pool, dev->iram_vaddr, dev->iram_size); + if (dev->codebuf.vaddr) + dma_free_coherent(&pdev->dev, dev->codebuf.size, + &dev->codebuf.vaddr, dev->codebuf.paddr); + if (dev->workbuf.vaddr) + dma_free_coherent(&pdev->dev, dev->workbuf.size, &dev->workbuf.vaddr, + dev->workbuf.paddr); + return 0; +} + +static struct platform_driver coda_driver = { + .probe = coda_probe, + .remove = coda_remove, + .driver = { + .name = CODA_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(coda_dt_ids), + }, + .id_table = coda_platform_ids, +}; + +module_platform_driver(coda_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Javier Martin "); +MODULE_DESCRIPTION("Coda multi-standard codec V4L2 driver"); diff --git a/drivers/media/platform/coda.h b/drivers/media/platform/coda.h new file mode 100644 index 00000000..f3f5e43c --- /dev/null +++ b/drivers/media/platform/coda.h @@ -0,0 +1,238 @@ +/* + * linux/drivers/media/platform/coda/coda_regs.h + * + * Copyright (C) 2012 Vista Silicon SL + * Javier Martin + * Xavier Duret + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _REGS_CODA_H_ +#define _REGS_CODA_H_ + +/* HW registers */ +#define CODA_REG_BIT_CODE_RUN 0x000 +#define CODA_REG_RUN_ENABLE (1 << 0) +#define CODA_REG_BIT_CODE_DOWN 0x004 +#define CODA_DOWN_ADDRESS_SET(x) (((x) & 0xffff) << 16) +#define CODA_DOWN_DATA_SET(x) ((x) & 0xffff) +#define CODA_REG_BIT_HOST_IN_REQ 0x008 +#define CODA_REG_BIT_INT_CLEAR 0x00c +#define CODA_REG_BIT_INT_CLEAR_SET 0x1 +#define CODA_REG_BIT_INT_STATUS 0x010 +#define CODA_REG_BIT_CODE_RESET 0x014 +#define CODA_REG_RESET_ENABLE (1 << 0) +#define CODA_REG_BIT_CUR_PC 0x018 + +/* Static SW registers */ +#define CODA_REG_BIT_CODE_BUF_ADDR 0x100 +#define CODA_REG_BIT_WORK_BUF_ADDR 0x104 +#define CODA_REG_BIT_PARA_BUF_ADDR 0x108 +#define CODA_REG_BIT_STREAM_CTRL 0x10c +#define CODA7_STREAM_BUF_PIC_RESET (1 << 4) +#define CODADX6_STREAM_BUF_PIC_RESET (1 << 3) +#define CODA7_STREAM_BUF_PIC_FLUSH (1 << 3) +#define CODADX6_STREAM_BUF_PIC_FLUSH (1 << 2) +#define CODA7_STREAM_BUF_DYNALLOC_EN (1 << 5) +#define CODADX6_STREAM_BUF_DYNALLOC_EN (1 << 4) +#define CODA_STREAM_CHKDIS_OFFSET (1 << 1) +#define CODA_STREAM_ENDIAN_SELECT (1 << 0) +#define CODA_REG_BIT_FRAME_MEM_CTRL 0x110 +#define CODA_IMAGE_ENDIAN_SELECT (1 << 0) +#define CODA_REG_BIT_RD_PTR(x) (0x120 + 8 * (x)) +#define CODA_REG_BIT_WR_PTR(x) (0x124 + 8 * (x)) +#define CODADX6_REG_BIT_SEARCH_RAM_BASE_ADDR 0x140 +#define CODA7_REG_BIT_AXI_SRAM_USE 0x140 +#define CODA7_USE_BIT_ENABLE (1 << 0) +#define CODA7_USE_HOST_BIT_ENABLE (1 << 7) +#define CODA7_USE_ME_ENABLE (1 << 4) +#define CODA7_USE_HOST_ME_ENABLE (1 << 11) +#define CODA_REG_BIT_BUSY 0x160 +#define CODA_REG_BIT_BUSY_FLAG 1 +#define CODA_REG_BIT_RUN_COMMAND 0x164 +#define CODA_COMMAND_SEQ_INIT 1 +#define CODA_COMMAND_SEQ_END 2 +#define CODA_COMMAND_PIC_RUN 3 +#define CODA_COMMAND_SET_FRAME_BUF 4 +#define CODA_COMMAND_ENCODE_HEADER 5 +#define CODA_COMMAND_ENC_PARA_SET 6 +#define CODA_COMMAND_DEC_PARA_SET 7 +#define CODA_COMMAND_DEC_BUF_FLUSH 8 +#define CODA_COMMAND_RC_CHANGE_PARAMETER 9 +#define CODA_COMMAND_FIRMWARE_GET 0xf +#define CODA_REG_BIT_RUN_INDEX 0x168 +#define CODA_INDEX_SET(x) ((x) & 0x3) +#define CODA_REG_BIT_RUN_COD_STD 0x16c +#define CODADX6_MODE_DECODE_MP4 0 +#define CODADX6_MODE_ENCODE_MP4 1 +#define CODADX6_MODE_DECODE_H264 2 +#define CODADX6_MODE_ENCODE_H264 3 +#define CODA7_MODE_DECODE_H264 0 +#define CODA7_MODE_DECODE_VC1 1 +#define CODA7_MODE_DECODE_MP2 2 +#define CODA7_MODE_DECODE_MP4 3 +#define CODA7_MODE_DECODE_DV3 3 +#define CODA7_MODE_DECODE_RV 4 +#define CODA7_MODE_DECODE_MJPG 5 +#define CODA7_MODE_ENCODE_H264 8 +#define CODA7_MODE_ENCODE_MP4 11 +#define CODA7_MODE_ENCODE_MJPG 13 +#define CODA_MODE_INVALID 0xffff +#define CODA_REG_BIT_INT_ENABLE 0x170 +#define CODA_INT_INTERRUPT_ENABLE (1 << 3) + +/* + * Commands' mailbox: + * registers with offsets in the range 0x180-0x1d0 + * have different meaning depending on the command being + * issued. + */ + +/* Encoder Sequence Initialization */ +#define CODA_CMD_ENC_SEQ_BB_START 0x180 +#define CODA_CMD_ENC_SEQ_BB_SIZE 0x184 +#define CODA_CMD_ENC_SEQ_OPTION 0x188 +#define CODA_OPTION_GAMMA_OFFSET 7 +#define CODA_OPTION_GAMMA_MASK 0x01 +#define CODA_OPTION_LIMITQP_OFFSET 6 +#define CODA_OPTION_LIMITQP_MASK 0x01 +#define CODA_OPTION_RCINTRAQP_OFFSET 5 +#define CODA_OPTION_RCINTRAQP_MASK 0x01 +#define CODA_OPTION_FMO_OFFSET 4 +#define CODA_OPTION_FMO_MASK 0x01 +#define CODA_OPTION_SLICEREPORT_OFFSET 1 +#define CODA_OPTION_SLICEREPORT_MASK 0x01 +#define CODA_CMD_ENC_SEQ_COD_STD 0x18c +#define CODA_STD_MPEG4 0 +#define CODA_STD_H263 1 +#define CODA_STD_H264 2 +#define CODA_STD_MJPG 3 +#define CODA_CMD_ENC_SEQ_SRC_SIZE 0x190 +#define CODA7_PICWIDTH_OFFSET 16 +#define CODA7_PICWIDTH_MASK 0xffff +#define CODADX6_PICWIDTH_OFFSET 10 +#define CODADX6_PICWIDTH_MASK 0x3ff +#define CODA_PICHEIGHT_OFFSET 0 +#define CODA_PICHEIGHT_MASK 0x3ff +#define CODA_CMD_ENC_SEQ_SRC_F_RATE 0x194 +#define CODA_CMD_ENC_SEQ_MP4_PARA 0x198 +#define CODA_MP4PARAM_VERID_OFFSET 6 +#define CODA_MP4PARAM_VERID_MASK 0x01 +#define CODA_MP4PARAM_INTRADCVLCTHR_OFFSET 2 +#define CODA_MP4PARAM_INTRADCVLCTHR_MASK 0x07 +#define CODA_MP4PARAM_REVERSIBLEVLCENABLE_OFFSET 1 +#define CODA_MP4PARAM_REVERSIBLEVLCENABLE_MASK 0x01 +#define CODA_MP4PARAM_DATAPARTITIONENABLE_OFFSET 0 +#define CODA_MP4PARAM_DATAPARTITIONENABLE_MASK 0x01 +#define CODA_CMD_ENC_SEQ_263_PARA 0x19c +#define CODA_263PARAM_ANNEXJENABLE_OFFSET 2 +#define CODA_263PARAM_ANNEXJENABLE_MASK 0x01 +#define CODA_263PARAM_ANNEXKENABLE_OFFSET 1 +#define CODA_263PARAM_ANNEXKENABLE_MASK 0x01 +#define CODA_263PARAM_ANNEXTENABLE_OFFSET 0 +#define CODA_263PARAM_ANNEXTENABLE_MASK 0x01 +#define CODA_CMD_ENC_SEQ_264_PARA 0x1a0 +#define CODA_264PARAM_DEBLKFILTEROFFSETBETA_OFFSET 12 +#define CODA_264PARAM_DEBLKFILTEROFFSETBETA_MASK 0x0f +#define CODA_264PARAM_DEBLKFILTEROFFSETALPHA_OFFSET 8 +#define CODA_264PARAM_DEBLKFILTEROFFSETALPHA_MASK 0x0f +#define CODA_264PARAM_DISABLEDEBLK_OFFSET 6 +#define CODA_264PARAM_DISABLEDEBLK_MASK 0x01 +#define CODA_264PARAM_CONSTRAINEDINTRAPREDFLAG_OFFSET 5 +#define CODA_264PARAM_CONSTRAINEDINTRAPREDFLAG_MASK 0x01 +#define CODA_264PARAM_CHROMAQPOFFSET_OFFSET 0 +#define CODA_264PARAM_CHROMAQPOFFSET_MASK 0x1f +#define CODA_CMD_ENC_SEQ_SLICE_MODE 0x1a4 +#define CODA_SLICING_SIZE_OFFSET 2 +#define CODA_SLICING_SIZE_MASK 0x3fffffff +#define CODA_SLICING_UNIT_OFFSET 1 +#define CODA_SLICING_UNIT_MASK 0x01 +#define CODA_SLICING_MODE_OFFSET 0 +#define CODA_SLICING_MODE_MASK 0x01 +#define CODA_CMD_ENC_SEQ_GOP_SIZE 0x1a8 +#define CODA_GOP_SIZE_OFFSET 0 +#define CODA_GOP_SIZE_MASK 0x3f +#define CODA_CMD_ENC_SEQ_RC_PARA 0x1ac +#define CODA_RATECONTROL_AUTOSKIP_OFFSET 31 +#define CODA_RATECONTROL_AUTOSKIP_MASK 0x01 +#define CODA_RATECONTROL_INITIALDELAY_OFFSET 16 +#define CODA_RATECONTROL_INITIALDELAY_MASK 0x7f +#define CODA_RATECONTROL_BITRATE_OFFSET 1 +#define CODA_RATECONTROL_BITRATE_MASK 0x7f +#define CODA_RATECONTROL_ENABLE_OFFSET 0 +#define CODA_RATECONTROL_ENABLE_MASK 0x01 +#define CODA_CMD_ENC_SEQ_RC_BUF_SIZE 0x1b0 +#define CODA_CMD_ENC_SEQ_INTRA_REFRESH 0x1b4 +#define CODADX6_CMD_ENC_SEQ_FMO 0x1b8 +#define CODA_FMOPARAM_TYPE_OFFSET 4 +#define CODA_FMOPARAM_TYPE_MASK 1 +#define CODA_FMOPARAM_SLICENUM_OFFSET 0 +#define CODA_FMOPARAM_SLICENUM_MASK 0x0f +#define CODA7_CMD_ENC_SEQ_SEARCH_BASE 0x1b8 +#define CODA7_CMD_ENC_SEQ_SEARCH_SIZE 0x1bc +#define CODA_CMD_ENC_SEQ_RC_QP_MAX 0x1c8 +#define CODA_QPMAX_OFFSET 0 +#define CODA_QPMAX_MASK 0x3f +#define CODA_CMD_ENC_SEQ_RC_GAMMA 0x1cc +#define CODA_GAMMA_OFFSET 0 +#define CODA_GAMMA_MASK 0xffff +#define CODA_RET_ENC_SEQ_SUCCESS 0x1c0 + +/* Encoder Picture Run */ +#define CODA_CMD_ENC_PIC_SRC_ADDR_Y 0x180 +#define CODA_CMD_ENC_PIC_SRC_ADDR_CB 0x184 +#define CODA_CMD_ENC_PIC_SRC_ADDR_CR 0x188 +#define CODA_CMD_ENC_PIC_QS 0x18c +#define CODA_CMD_ENC_PIC_ROT_MODE 0x190 +#define CODA_ROT_MIR_ENABLE (1 << 4) +#define CODA_ROT_0 (0x0 << 0) +#define CODA_ROT_90 (0x1 << 0) +#define CODA_ROT_180 (0x2 << 0) +#define CODA_ROT_270 (0x3 << 0) +#define CODA_MIR_NONE (0x0 << 2) +#define CODA_MIR_VER (0x1 << 2) +#define CODA_MIR_HOR (0x2 << 2) +#define CODA_MIR_VER_HOR (0x3 << 2) +#define CODA_CMD_ENC_PIC_OPTION 0x194 +#define CODA_CMD_ENC_PIC_BB_START 0x198 +#define CODA_CMD_ENC_PIC_BB_SIZE 0x19c +#define CODA_RET_ENC_PIC_TYPE 0x1c4 +#define CODA_RET_ENC_PIC_SLICE_NUM 0x1cc +#define CODA_RET_ENC_PIC_FLAG 0x1d0 + +/* Set Frame Buffer */ +#define CODA_CMD_SET_FRAME_BUF_NUM 0x180 +#define CODA_CMD_SET_FRAME_BUF_STRIDE 0x184 +#define CODA7_CMD_SET_FRAME_AXI_BIT_ADDR 0x190 +#define CODA7_CMD_SET_FRAME_AXI_IPACDC_ADDR 0x194 +#define CODA7_CMD_SET_FRAME_AXI_DBKY_ADDR 0x198 +#define CODA7_CMD_SET_FRAME_AXI_DBKC_ADDR 0x19c +#define CODA7_CMD_SET_FRAME_AXI_OVL_ADDR 0x1a0 +#define CODA7_CMD_SET_FRAME_SOURCE_BUF_STRIDE 0x1a8 + +/* Encoder Header */ +#define CODA_CMD_ENC_HEADER_CODE 0x180 +#define CODA_GAMMA_OFFSET 0 +#define CODA_HEADER_H264_SPS 0 +#define CODA_HEADER_H264_PPS 1 +#define CODA_HEADER_MP4V_VOL 0 +#define CODA_HEADER_MP4V_VOS 1 +#define CODA_HEADER_MP4V_VIS 2 +#define CODA_CMD_ENC_HEADER_BB_START 0x184 +#define CODA_CMD_ENC_HEADER_BB_SIZE 0x188 + +/* Get Version */ +#define CODA_CMD_FIRMWARE_VERNUM 0x1c0 +#define CODA_FIRMWARE_PRODUCT(x) (((x) >> 16) & 0xffff) +#define CODA_FIRMWARE_MAJOR(x) (((x) >> 12) & 0x0f) +#define CODA_FIRMWARE_MINOR(x) (((x) >> 8) & 0x0f) +#define CODA_FIRMWARE_RELEASE(x) ((x) & 0xff) +#define CODA_FIRMWARE_VERNUM(product, major, minor, release) \ + ((product) << 16 | ((major) << 12) | \ + ((minor) << 8) | (release)) + +#endif diff --git a/drivers/media/platform/davinci/Kconfig b/drivers/media/platform/davinci/Kconfig new file mode 100644 index 00000000..afb3aec1 --- /dev/null +++ b/drivers/media/platform/davinci/Kconfig @@ -0,0 +1,78 @@ +config VIDEO_DAVINCI_VPIF_DISPLAY + tristate "TI DaVinci VPIF V4L2-Display driver" + depends on VIDEO_DEV && ARCH_DAVINCI + select VIDEOBUF2_DMA_CONTIG + select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT + help + Enables Davinci VPIF module used for display devices. + This module is used for display on TI DM6467/DA850/OMAPL138 + SoCs. + + To compile this driver as a module, choose M here. There will + be two modules called vpif.ko and vpif_display.ko + +config VIDEO_DAVINCI_VPIF_CAPTURE + tristate "TI DaVinci VPIF video capture driver" + depends on VIDEO_DEV && ARCH_DAVINCI + select VIDEOBUF2_DMA_CONTIG + help + Enables Davinci VPIF module used for capture devices. + This module is used for capture on TI DM6467/DA850/OMAPL138 + SoCs. + + To compile this driver as a module, choose M here. There will + be two modules called vpif.ko and vpif_capture.ko + +config VIDEO_DM6446_CCDC + tristate "TI DM6446 CCDC video capture driver" + depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3) + select VIDEOBUF_DMA_CONTIG + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here. There will + be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko + +config VIDEO_DM355_CCDC + tristate "TI DM355 CCDC video capture driver" + depends on VIDEO_V4L2 && ARCH_DAVINCI + select VIDEOBUF_DMA_CONTIG + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here. There will + be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko + +config VIDEO_DM365_ISIF + tristate "TI DM365 ISIF video capture driver" + depends on VIDEO_V4L2 && ARCH_DAVINCI + select VIDEOBUF_DMA_CONTIG + help + Enables ISIF hw module. This is the hardware module for + configuring ISIF in VPFE to capture Raw Bayer RGB data from + a image sensor or YUV data from a YUV source. + + To compile this driver as a module, choose M here. There will + be three modules called vpfe_capture.ko, vpss.ko and isif.ko + +config VIDEO_DAVINCI_VPBE_DISPLAY + tristate "TI DaVinci VPBE V4L2-Display driver" + depends on ARCH_DAVINCI + select VIDEOBUF2_DMA_CONTIG + help + Enables Davinci VPBE module used for display devices. + This module is used for display on TI DM644x/DM365/DM355 + based display devices. + + To compile this driver as a module, choose M here. There will + be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko, + vpbe_venc.ko and vpbe_display.ko diff --git a/drivers/media/platform/davinci/Makefile b/drivers/media/platform/davinci/Makefile new file mode 100644 index 00000000..d74d9eeb --- /dev/null +++ b/drivers/media/platform/davinci/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for the davinci video device drivers. +# + +#VPIF Display driver +obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif.o vpif_display.o +#VPIF Capture driver +obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif.o vpif_capture.o + +# Capture: DM6446 and DM355 +obj-$(CONFIG_VIDEO_DM6446_CCDC) += vpfe_capture.o vpss.o dm644x_ccdc.o +obj-$(CONFIG_VIDEO_DM355_CCDC) += vpfe_capture.o vpss.o dm355_ccdc.o +obj-$(CONFIG_VIDEO_DM365_ISIF) += vpfe_capture.o vpss.o isif.o +obj-$(CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY) += vpss.o vpbe.o vpbe_osd.o \ + vpbe_venc.o vpbe_display.o diff --git a/drivers/media/platform/davinci/ccdc_hw_device.h b/drivers/media/platform/davinci/ccdc_hw_device.h new file mode 100644 index 00000000..86b9b351 --- /dev/null +++ b/drivers/media/platform/davinci/ccdc_hw_device.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ccdc device API + */ +#ifndef _CCDC_HW_DEVICE_H +#define _CCDC_HW_DEVICE_H + +#ifdef __KERNEL__ +#include +#include +#include +#include + +/* + * ccdc hw operations + */ +struct ccdc_hw_ops { + /* Pointer to initialize function to initialize ccdc device */ + int (*open) (struct device *dev); + /* Pointer to deinitialize function */ + int (*close) (struct device *dev); + /* set ccdc base address */ + void (*set_ccdc_base)(void *base, int size); + /* Pointer to function to enable or disable ccdc */ + void (*enable) (int en); + /* reset sbl. only for 6446 */ + void (*reset) (void); + /* enable output to sdram */ + void (*enable_out_to_sdram) (int en); + /* Pointer to function to set hw parameters */ + int (*set_hw_if_params) (struct vpfe_hw_if_param *param); + /* get interface parameters */ + int (*get_hw_if_params) (struct vpfe_hw_if_param *param); + /* + * Pointer to function to set parameters. Used + * for implementing VPFE_S_CCDC_PARAMS + */ + int (*set_params) (void *params); + /* + * Pointer to function to get parameter. Used + * for implementing VPFE_G_CCDC_PARAMS + */ + int (*get_params) (void *params); + /* Pointer to function to configure ccdc */ + int (*configure) (void); + + /* Pointer to function to set buffer type */ + int (*set_buftype) (enum ccdc_buftype buf_type); + /* Pointer to function to get buffer type */ + enum ccdc_buftype (*get_buftype) (void); + /* Pointer to function to set frame format */ + int (*set_frame_format) (enum ccdc_frmfmt frm_fmt); + /* Pointer to function to get frame format */ + enum ccdc_frmfmt (*get_frame_format) (void); + /* enumerate hw pix formats */ + int (*enum_pix)(u32 *hw_pix, int i); + /* Pointer to function to set buffer type */ + u32 (*get_pixel_format) (void); + /* Pointer to function to get pixel format. */ + int (*set_pixel_format) (u32 pixfmt); + /* Pointer to function to set image window */ + int (*set_image_window) (struct v4l2_rect *win); + /* Pointer to function to set image window */ + void (*get_image_window) (struct v4l2_rect *win); + /* Pointer to function to get line length */ + unsigned int (*get_line_length) (void); + + /* Query CCDC control IDs */ + int (*queryctrl)(struct v4l2_queryctrl *qctrl); + /* Set CCDC control */ + int (*set_control)(struct v4l2_control *ctrl); + /* Get CCDC control */ + int (*get_control)(struct v4l2_control *ctrl); + + /* Pointer to function to set frame buffer address */ + void (*setfbaddr) (unsigned long addr); + /* Pointer to function to get field id */ + int (*getfid) (void); +}; + +struct ccdc_hw_device { + /* ccdc device name */ + char name[32]; + /* module owner */ + struct module *owner; + /* hw ops */ + struct ccdc_hw_ops hw_ops; +}; + +/* Used by CCDC module to register & unregister with vpfe capture driver */ +int vpfe_register_ccdc_device(struct ccdc_hw_device *dev); +void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev); + +#endif +#endif diff --git a/drivers/media/platform/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c new file mode 100644 index 00000000..05f8fb7f --- /dev/null +++ b/drivers/media/platform/davinci/dm355_ccdc.c @@ -0,0 +1,1039 @@ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * CCDC hardware module for DM355 + * ------------------------------ + * + * This module is for configuring DM355 CCD controller of VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Bayer RGB data, before writing it to SDRAM. This + * module also allows application to configure individual + * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL. + * To do so, application include dm355_ccdc.h and vpfe_capture.h header + * files. The setparams() API is called by vpfe_capture driver + * to configure module parameters + * + * TODO: 1) Raw bayer parameter settings and bayer capture + * 2) Split module parameter structure to module specific ioctl structs + * 3) add support for lense shading correction + * 4) investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include +#include +#include +#include +#include + +#include +#include + +#include "dm355_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM355"); +MODULE_AUTHOR("Texas Instruments"); + +static struct ccdc_oper_config { + struct device *dev; + /* CCDC interface type */ + enum vpfe_hw_if_type if_type; + /* Raw Bayer configuration */ + struct ccdc_params_raw bayer; + /* YCbCr configuration */ + struct ccdc_params_ycbcr ycbcr; + /* ccdc base address */ + void __iomem *base_addr; +} ccdc_cfg = { + /* Raw configurations */ + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .gain = { + .r_ye = 256, + .gb_g = 256, + .gr_cy = 256, + .b_mg = 256 + }, + .config_params = { + .datasft = 2, + .mfilt1 = CCDC_NO_MEDIAN_FILTER1, + .mfilt2 = CCDC_NO_MEDIAN_FILTER2, + .alaw = { + .gamma_wd = 2, + }, + .blk_clamp = { + .sample_pixel = 1, + .dc_sub = 25 + }, + .col_pat_field0 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + .col_pat_field1 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + }, + }, + /* YCbCr configuration */ + .ycbcr = { + .win = CCDC_WIN_PAL, + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED + }, +}; + + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_cfg.base_addr + offset); +} + +static void ccdc_enable(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~CCDC_SYNCEN_VDHDEN_MASK); + temp |= (en & CCDC_SYNCEN_VDHDEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_enable_output_to_sdram(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~(CCDC_SYNCEN_WEN_MASK)); + temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_config_gain_offset(void) +{ + /* configure gain */ + regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN); + regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN); + regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN); + regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN); + /* configure offset */ + regw(ccdc_cfg.bayer.ccdc_offset, OFFSET); +} + +/* + * ccdc_restore_defaults() + * This function restore power on defaults in the ccdc registers + */ +static int ccdc_restore_defaults(void) +{ + int i; + + dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults..."); + /* set all registers to zero */ + for (i = 0; i <= CCDC_REG_LAST; i += 4) + regw(0, i); + + /* now override the values with power on defaults in registers */ + regw(MODESET_DEFAULT, MODESET); + /* no culling support */ + regw(CULH_DEFAULT, CULH); + regw(CULV_DEFAULT, CULV); + /* Set default Gain and Offset */ + ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT; + ccdc_config_gain_offset(); + regw(OUTCLIP_DEFAULT, OUTCLIP); + regw(LSCCFG2_DEFAULT, LSCCFG2); + /* select ccdc input */ + if (vpss_select_ccdc_source(VPSS_CCDCIN)) { + dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source"); + return -EFAULT; + } + /* select ccdc clock */ + if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) { + dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock"); + return -EFAULT; + } + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults..."); + return 0; +} + +static int ccdc_open(struct device *device) +{ + return ccdc_restore_defaults(); +} + +static int ccdc_close(struct device *device) +{ + /* disable clock */ + vpss_enable_clock(VPSS_CCDC_CLOCK, 0); + /* do nothing for now */ + return 0; +} +/* + * ccdc_setwin() + * This function will configure the window size to + * be capture in CCDC reg. + */ +static void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int mid_img = 0; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); + + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; + + /* Writing the horizontal info into the registers */ + regw(horz_start, SPH); + regw(horz_nr_pixels, NPH); + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 and VDINT1 */ + regw(vert_start, VDINT0); + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* configure VDINT0 and VDINT1 */ + mid_img = vert_start + (image_win->height / 2); + regw(vert_start, VDINT0); + regw(mid_img, VDINT1); + } + regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0); + regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1); + regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); +} + +static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) +{ + if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT || + ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) { + dev_dbg(ccdc_cfg.dev, "Invalid value of data shift\n"); + return -EINVAL; + } + + if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 || + ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) { + dev_dbg(ccdc_cfg.dev, "Invalid value of median filter1\n"); + return -EINVAL; + } + + if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 || + ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) { + dev_dbg(ccdc_cfg.dev, "Invalid value of median filter2\n"); + return -EINVAL; + } + + if ((ccdcparam->med_filt_thres < 0) || + (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of median filter threshold\n"); + return -EINVAL; + } + + if (ccdcparam->data_sz < CCDC_DATA_16BITS || + ccdcparam->data_sz > CCDC_DATA_8BITS) { + dev_dbg(ccdc_cfg.dev, "Invalid value of data size\n"); + return -EINVAL; + } + + if (ccdcparam->alaw.enable) { + if (ccdcparam->alaw.gamma_wd < CCDC_GAMMA_BITS_13_4 || + ccdcparam->alaw.gamma_wd > CCDC_GAMMA_BITS_09_0) { + dev_dbg(ccdc_cfg.dev, "Invalid value of ALAW\n"); + return -EINVAL; + } + } + + if (ccdcparam->blk_clamp.b_clamp_enable) { + if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS || + ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of sample pixel\n"); + return -EINVAL; + } + if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES || + ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of sample lines\n"); + return -EINVAL; + } + } + return 0; +} + +/* Parameter operations */ +static int ccdc_set_params(void __user *params) +{ + struct ccdc_config_params_raw ccdc_raw_params; + int x; + + /* only raw module parameters can be set through the IOCTL */ + if (ccdc_cfg.if_type != VPFE_RAW_BAYER) + return -EINVAL; + + x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); + if (x) { + dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc" + "params, %d\n", x); + return -EFAULT; + } + + if (!validate_ccdc_param(&ccdc_raw_params)) { + memcpy(&ccdc_cfg.bayer.config_params, + &ccdc_raw_params, + sizeof(ccdc_raw_params)); + return 0; + } + return -EINVAL; +} + +/* This function will configure CCDC for YCbCr video capture */ +static void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; + u32 temp; + + /* first set the CCDC power on defaults values in all registers */ + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); + ccdc_restore_defaults(); + + /* configure pixel format & video frame format */ + temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) << + CCDC_INPUT_MODE_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << + CCDC_FRM_FMT_SHIFT)); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, REC656IF); + /* + * configure the FID, VD, HD pin polarity fld,hd pol positive, + * vd negative, 8-bit pack mode + */ + temp |= CCDC_VD_POL_NEGATIVE; + } else { /* y/c external sync mode */ + temp |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + + /* pack the data to 8-bit */ + temp |= CCDC_DATA_PACK_ENABLE; + + regw(temp, MODESET); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* configure the order of y cb cr in SD-RAM */ + temp = (params->pix_order << CCDC_Y8POS_SHIFT); + temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC; + regw(temp, CCDCFG); + + /* + * configure the horizontal line offset. This is done by rounding up + * width to a multiple of 16 pixels and multiply by two to account for + * y:cb:cr 4:2:2 data + */ + regw(((params->win.width * 2 + 31) >> 5), HSIZE); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) { + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST); + } + + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); +} + +/* + * ccdc_config_black_clamp() + * configure parameters for Optical Black Clamp + */ +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->b_clamp_enable) { + /* configure DCSub */ + regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB); + regw(0x0000, CLAMP); + return; + } + /* Enable the Black clamping, set sample lines and pixels */ + val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE; + regw(val, CLAMP); + + /* If Black clamping is enable then make dcsub 0 */ + val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK) + << CCDC_NUM_LINE_CALC_SHIFT; + regw(val, DCSUB); +} + +/* + * ccdc_config_black_compense() + * configure parameters for Black Compensation + */ +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = (bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT); + regw(val, BLKCMP1); + + val = ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT); + regw(val, BLKCMP0); +} + +/* + * ccdc_write_dfc_entry() + * write an entry in the dfc table. + */ +int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc) +{ +/* TODO This is to be re-visited and adjusted */ +#define DFC_WRITE_WAIT_COUNT 1000 + u32 val, count = DFC_WRITE_WAIT_COUNT; + + regw(dfc->dft_corr_vert[index], DFCMEM0); + regw(dfc->dft_corr_horz[index], DFCMEM1); + regw(dfc->dft_corr_sub1[index], DFCMEM2); + regw(dfc->dft_corr_sub2[index], DFCMEM3); + regw(dfc->dft_corr_sub3[index], DFCMEM4); + /* set WR bit to write */ + val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK; + regw(val, DFCMEMCTL); + + /* + * Assume, it is very short. If we get an error, we need to + * adjust this value + */ + while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK) + count--; + /* + * TODO We expect the count to be non-zero to be successful. Adjust + * the count if write requires more time + */ + + if (count) { + dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n"); + return -1; + } + return 0; +} + +/* + * ccdc_config_vdfc() + * configure parameters for Vertical Defect Correction + */ +static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc) +{ + u32 val; + int i; + + /* Configure General Defect Correction. The table used is from IPIPE */ + val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK; + + /* Configure Vertical Defect Correction if needed */ + if (!dfc->ver_dft_en) { + /* Enable only General Defect Correction */ + regw(val, DFCCTL); + return 0; + } + + if (dfc->table_size > CCDC_DFT_TABLE_SIZE) + return -EINVAL; + + val |= CCDC_DFCCTL_VDFC_DISABLE; + val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) << + CCDC_DFCCTL_VDFCSL_SHIFT; + val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) << + CCDC_DFCCTL_VDFCUDA_SHIFT; + val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) << + CCDC_DFCCTL_VDFLSFT_SHIFT; + regw(val , DFCCTL); + + /* clear address ptr to offset 0 */ + val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT; + + /* write defect table entries */ + for (i = 0; i < dfc->table_size; i++) { + /* increment address for non zero index */ + if (i != 0) + val = CCDC_DFCMEMCTL_INC_ADDR; + regw(val, DFCMEMCTL); + if (ccdc_write_dfc_entry(i, dfc) < 0) + return -EFAULT; + } + + /* update saturation level and enable dfc */ + regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT); + val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK << + CCDC_DFCCTL_VDFCEN_SHIFT); + regw(val, DFCCTL); + return 0; +} + +/* + * ccdc_config_csc() + * configure parameters for color space conversion + * Each register CSCM0-7 has two values in S8Q5 format. + */ +static void ccdc_config_csc(struct ccdc_csc *csc) +{ + u32 val1 = 0, val2; + int i; + + if (!csc->enable) + return; + + /* Enable the CSC sub-module */ + regw(CCDC_CSC_ENABLE, CSCCTL); + + /* Converting the co-eff as per the format of the register */ + for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) { + if ((i % 2) == 0) { + /* CSCM - LSB */ + val1 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + /* + * convert decimal part to binary. Use 2 decimal + * precision, user values range from .00 - 0.99 + */ + val1 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + } else { + + /* CSCM - MSB */ + val2 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + val2 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + val2 <<= CCDC_CSCM_MSB_SHIFT; + val2 |= val1; + regw(val2, (CSCM0 + ((i - 1) << 1))); + } + } +} + +/* + * ccdc_config_color_patterns() + * configure parameters for color patterns + */ +static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0, + struct ccdc_col_pat *pat1) +{ + u32 val; + + val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) | + (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) | + (pat1->elop << 12) | (pat1->elep << 14)); + regw(val, COLPTN); +} + +/* This function will configure CCDC for Raw mode image capture */ +static int ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_cfg.bayer; + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int val; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); + + /* restore power on defaults to register */ + ccdc_restore_defaults(); + + /* CCDCFG register: + * set CCD Not to swap input since input is RAW data + * set FID detection function to Latch at V-Sync + * set WENLOG - ccdc valid area to AND + * set TRGSEL to WENBIT + * set EXTRG to DISABLE + * disable latching function on VSYNC - shadowed registers + */ + regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC | + CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN | + CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG); + + /* + * Set VDHD direction to input, input type to raw input + * normal data polarity, do not use external WEN + */ + val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL | + CCDC_EXWEN_DISABLE); + + /* + * Configure the vertical sync polarity (MODESET.VDPOL), horizontal + * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL), + * frame format(progressive or interlace), & pixel format (Input mode) + */ + val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | + ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | + ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT)); + + /* set pack for alaw compression */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + val |= CCDC_DATA_PACK_ENABLE; + + /* Configure for LPF */ + if (config_params->lpf_enable) + val |= (config_params->lpf_enable & CCDC_LPF_MASK) << + CCDC_LPF_SHIFT; + + /* Configure the data shift */ + val |= (config_params->datasft & CCDC_DATASFT_MASK) << + CCDC_DATASFT_SHIFT; + regw(val , MODESET); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val); + + /* Configure the Median Filter threshold */ + regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT); + + /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */ + val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT | + CCDC_CFA_MOSAIC; + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val |= (CCDC_ALAW_ENABLE | + ((config_params->alaw.gamma_wd & + CCDC_ALAW_GAMMA_WD_MASK) << + CCDC_GAMMAWD_INPUT_SHIFT)); + } + + /* Configure Median filter1 & filter2 */ + val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) | + (config_params->mfilt2 << CCDC_MFILT2_SHIFT)); + + regw(val, GAMMAWD); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 1); + + /* Optical Clamp Averaging */ + ccdc_config_black_clamp(&config_params->blk_clamp); + + /* Black level compensation */ + ccdc_config_black_compense(&config_params->blk_comp); + + /* Vertical Defect Correction if needed */ + if (ccdc_config_vdfc(&config_params->vertical_dft) < 0) + return -EFAULT; + + /* color space conversion */ + ccdc_config_csc(&config_params->csc); + + /* color pattern */ + ccdc_config_color_patterns(&config_params->col_pat_field0, + &config_params->col_pat_field1); + + /* Configure the Gain & offset control */ + ccdc_config_gain_offset(); + + dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val); + + /* Configure DATAOFST register */ + val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) << + CCDC_DATAOFST_H_SHIFT; + val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) << + CCDC_DATAOFST_V_SHIFT; + regw(val, DATAOFST); + + /* configuring HSIZE register */ + val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) << + CCDC_HSIZE_FLIP_SHIFT; + + /* If pack 8 is enable then 1 pixel will take 1 byte */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) { + val |= (((params->win.width) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK; + + /* adjust to multiple of 32 */ + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", + (((params->win.width) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK); + } else { + /* else one pixel will take 2 byte */ + val |= (((params->win.width * 2) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK; + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", + (((params->win.width * 2) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK); + } + regw(val, HSIZE); + + /* Configure SDOFST register */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For interlace inverse mode */ + regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_INTERLACE_INVERSE); + } else { + /* For interlace non inverse mode */ + regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_INTERLACE_NORMAL); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + if (params->image_invert_enable) { + /* For progessive inverse mode */ + regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_PROGRESSIVE_INVERSE); + } else { + /* For progessive non inverse mode */ + regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_PROGRESSIVE_NORMAL); + } + } + dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); + return 0; +} + +static int ccdc_configure(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_config_raw(); + else + ccdc_config_ycbcr(); + return 0; +} + +static int ccdc_set_buftype(enum ccdc_buftype buf_type) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.buf_type = buf_type; + else + ccdc_cfg.ycbcr.buf_type = buf_type; + return 0; +} +static enum ccdc_buftype ccdc_get_buftype(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.buf_type; + return ccdc_cfg.ycbcr.buf_type; +} + +static int ccdc_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { + *pix = ccdc_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { + *pix = ccdc_raw_yuv_pix_formats[i]; + ret = 0; + } + } + return ret; +} + +static int ccdc_set_pixel_format(u32 pixfmt) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + if (pixfmt == V4L2_PIX_FMT_SBGGR8) + alaw->enable = 1; + else if (pixfmt != V4L2_PIX_FMT_SBGGR16) + return -EINVAL; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + } + return 0; +} +static u32 ccdc_get_pixel_format(void) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + u32 pixfmt; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + if (alaw->enable) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} +static int ccdc_set_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.win = *win; + else + ccdc_cfg.ycbcr.win = *win; + return 0; +} + +static void ccdc_get_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + *win = ccdc_cfg.bayer.win; + else + *win = ccdc_cfg.ycbcr.win; +} + +static unsigned int ccdc_get_line_length(void) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int len; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if ((config_params->alaw.enable) || + (config_params->data_sz == CCDC_DATA_8BITS)) + len = ccdc_cfg.bayer.win.width; + else + len = ccdc_cfg.bayer.win.width * 2; + } else + len = ccdc_cfg.ycbcr.win.width * 2; + return ALIGN(len, 32); +} + +static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.frm_fmt = frm_fmt; + else + ccdc_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} + +static enum ccdc_frmfmt ccdc_get_frame_format(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.frm_fmt; + else + return ccdc_cfg.ycbcr.frm_fmt; +} + +static int ccdc_getfid(void) +{ + return (regr(MODESET) >> 15) & 1; +} + +/* misc operations */ +static inline void ccdc_setfbaddr(unsigned long addr) +{ + regw((addr >> 21) & 0x007f, STADRH); + regw((addr >> 5) & 0x0ffff, STADRL); +} + +static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + ccdc_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + ccdc_cfg.ycbcr.vd_pol = params->vdpol; + ccdc_cfg.ycbcr.hd_pol = params->hdpol; + break; + default: + /* TODO add support for raw bayer here */ + return -EINVAL; + } + return 0; +} + +static struct ccdc_hw_device ccdc_hw_dev = { + .name = "DM355 CCDC", + .owner = THIS_MODULE, + .hw_ops = { + .open = ccdc_open, + .close = ccdc_close, + .enable = ccdc_enable, + .enable_out_to_sdram = ccdc_enable_output_to_sdram, + .set_hw_if_params = ccdc_set_hw_if_params, + .set_params = ccdc_set_params, + .configure = ccdc_configure, + .set_buftype = ccdc_set_buftype, + .get_buftype = ccdc_get_buftype, + .enum_pix = ccdc_enum_pix, + .set_pixel_format = ccdc_set_pixel_format, + .get_pixel_format = ccdc_get_pixel_format, + .set_frame_format = ccdc_set_frame_format, + .get_frame_format = ccdc_get_frame_format, + .set_image_window = ccdc_set_image_window, + .get_image_window = ccdc_get_image_window, + .get_line_length = ccdc_get_line_length, + .setfbaddr = ccdc_setfbaddr, + .getfid = ccdc_getfid, + }, +}; + +static int dm355_ccdc_probe(struct platform_device *pdev) +{ + void (*setup_pinmux)(void); + struct resource *res; + int status = 0; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&ccdc_hw_dev); + if (status < 0) + return status; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + status = -ENODEV; + goto fail_nores; + } + + res = request_mem_region(res->start, resource_size(res), res->name); + if (!res) { + status = -EBUSY; + goto fail_nores; + } + + ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res)); + if (!ccdc_cfg.base_addr) { + status = -ENOMEM; + goto fail_nomem; + } + + /* Platform data holds setup_pinmux function ptr */ + if (NULL == pdev->dev.platform_data) { + status = -ENODEV; + goto fail_nomap; + } + setup_pinmux = pdev->dev.platform_data; + /* + * setup Mux configuration for ccdc which may be different for + * different SoCs using this CCDC + */ + setup_pinmux(); + ccdc_cfg.dev = &pdev->dev; + printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); + return 0; +fail_nomap: + iounmap(ccdc_cfg.base_addr); +fail_nomem: + release_mem_region(res->start, resource_size(res)); +fail_nores: + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return status; +} + +static int dm355_ccdc_remove(struct platform_device *pdev) +{ + struct resource *res; + + iounmap(ccdc_cfg.base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, resource_size(res)); + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return 0; +} + +static struct platform_driver dm355_ccdc_driver = { + .driver = { + .name = "dm355_ccdc", + .owner = THIS_MODULE, + }, + .remove = dm355_ccdc_remove, + .probe = dm355_ccdc_probe, +}; + +module_platform_driver(dm355_ccdc_driver); diff --git a/drivers/media/platform/davinci/dm355_ccdc_regs.h b/drivers/media/platform/davinci/dm355_ccdc_regs.h new file mode 100644 index 00000000..2e1946e0 --- /dev/null +++ b/drivers/media/platform/davinci/dm355_ccdc_regs.h @@ -0,0 +1,310 @@ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _DM355_CCDC_REGS_H +#define _DM355_CCDC_REGS_H + +/**************************************************************************\ +* Register OFFSET Definitions +\**************************************************************************/ +#define SYNCEN 0x00 +#define MODESET 0x04 +#define HDWIDTH 0x08 +#define VDWIDTH 0x0c +#define PPLN 0x10 +#define LPFR 0x14 +#define SPH 0x18 +#define NPH 0x1c +#define SLV0 0x20 +#define SLV1 0x24 +#define NLV 0x28 +#define CULH 0x2c +#define CULV 0x30 +#define HSIZE 0x34 +#define SDOFST 0x38 +#define STADRH 0x3c +#define STADRL 0x40 +#define CLAMP 0x44 +#define DCSUB 0x48 +#define COLPTN 0x4c +#define BLKCMP0 0x50 +#define BLKCMP1 0x54 +#define MEDFILT 0x58 +#define RYEGAIN 0x5c +#define GRCYGAIN 0x60 +#define GBGGAIN 0x64 +#define BMGGAIN 0x68 +#define OFFSET 0x6c +#define OUTCLIP 0x70 +#define VDINT0 0x74 +#define VDINT1 0x78 +#define RSV0 0x7c +#define GAMMAWD 0x80 +#define REC656IF 0x84 +#define CCDCFG 0x88 +#define FMTCFG 0x8c +#define FMTPLEN 0x90 +#define FMTSPH 0x94 +#define FMTLNH 0x98 +#define FMTSLV 0x9c +#define FMTLNV 0xa0 +#define FMTRLEN 0xa4 +#define FMTHCNT 0xa8 +#define FMT_ADDR_PTR_B 0xac +#define FMT_ADDR_PTR(i) (FMT_ADDR_PTR_B + (i * 4)) +#define FMTPGM_VF0 0xcc +#define FMTPGM_VF1 0xd0 +#define FMTPGM_AP0 0xd4 +#define FMTPGM_AP1 0xd8 +#define FMTPGM_AP2 0xdc +#define FMTPGM_AP3 0xe0 +#define FMTPGM_AP4 0xe4 +#define FMTPGM_AP5 0xe8 +#define FMTPGM_AP6 0xec +#define FMTPGM_AP7 0xf0 +#define LSCCFG1 0xf4 +#define LSCCFG2 0xf8 +#define LSCH0 0xfc +#define LSCV0 0x100 +#define LSCKH 0x104 +#define LSCKV 0x108 +#define LSCMEMCTL 0x10c +#define LSCMEMD 0x110 +#define LSCMEMQ 0x114 +#define DFCCTL 0x118 +#define DFCVSAT 0x11c +#define DFCMEMCTL 0x120 +#define DFCMEM0 0x124 +#define DFCMEM1 0x128 +#define DFCMEM2 0x12c +#define DFCMEM3 0x130 +#define DFCMEM4 0x134 +#define CSCCTL 0x138 +#define CSCM0 0x13c +#define CSCM1 0x140 +#define CSCM2 0x144 +#define CSCM3 0x148 +#define CSCM4 0x14c +#define CSCM5 0x150 +#define CSCM6 0x154 +#define CSCM7 0x158 +#define DATAOFST 0x15c +#define CCDC_REG_LAST DATAOFST +/************************************************************** +* Define for various register bit mask and shifts for CCDC +* +**************************************************************/ +#define CCDC_RAW_IP_MODE 0 +#define CCDC_VDHDOUT_INPUT 0 +#define CCDC_YCINSWP_RAW (0 << 4) +#define CCDC_EXWEN_DISABLE 0 +#define CCDC_DATAPOL_NORMAL 0 +#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC 0 +#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC (1 << 6) +#define CCDC_CCDCFG_WENLOG_AND 0 +#define CCDC_CCDCFG_TRGSEL_WEN 0 +#define CCDC_CCDCFG_EXTRG_DISABLE 0 +#define CCDC_CFA_MOSAIC 0 +#define CCDC_Y8POS_SHIFT 11 + +#define CCDC_VDC_DFCVSAT_MASK 0x3fff +#define CCDC_DATAOFST_MASK 0x0ff +#define CCDC_DATAOFST_H_SHIFT 0 +#define CCDC_DATAOFST_V_SHIFT 8 +#define CCDC_GAMMAWD_CFA_MASK 1 +#define CCDC_GAMMAWD_CFA_SHIFT 5 +#define CCDC_GAMMAWD_INPUT_SHIFT 2 +#define CCDC_FID_POL_MASK 1 +#define CCDC_FID_POL_SHIFT 4 +#define CCDC_HD_POL_MASK 1 +#define CCDC_HD_POL_SHIFT 3 +#define CCDC_VD_POL_MASK 1 +#define CCDC_VD_POL_SHIFT 2 +#define CCDC_VD_POL_NEGATIVE (1 << 2) +#define CCDC_FRM_FMT_MASK 1 +#define CCDC_FRM_FMT_SHIFT 7 +#define CCDC_DATA_SZ_MASK 7 +#define CCDC_DATA_SZ_SHIFT 8 +#define CCDC_VDHDOUT_MASK 1 +#define CCDC_VDHDOUT_SHIFT 0 +#define CCDC_EXWEN_MASK 1 +#define CCDC_EXWEN_SHIFT 5 +#define CCDC_INPUT_MODE_MASK 3 +#define CCDC_INPUT_MODE_SHIFT 12 +#define CCDC_PIX_FMT_MASK 3 +#define CCDC_PIX_FMT_SHIFT 12 +#define CCDC_DATAPOL_MASK 1 +#define CCDC_DATAPOL_SHIFT 6 +#define CCDC_WEN_ENABLE (1 << 1) +#define CCDC_VDHDEN_ENABLE (1 << 16) +#define CCDC_LPF_ENABLE (1 << 14) +#define CCDC_ALAW_ENABLE 1 +#define CCDC_ALAW_GAMMA_WD_MASK 7 +#define CCDC_REC656IF_BT656_EN 3 + +#define CCDC_FMTCFG_FMTMODE_MASK 3 +#define CCDC_FMTCFG_FMTMODE_SHIFT 1 +#define CCDC_FMTCFG_LNUM_MASK 3 +#define CCDC_FMTCFG_LNUM_SHIFT 4 +#define CCDC_FMTCFG_ADDRINC_MASK 7 +#define CCDC_FMTCFG_ADDRINC_SHIFT 8 + +#define CCDC_CCDCFG_FIDMD_SHIFT 6 +#define CCDC_CCDCFG_WENLOG_SHIFT 8 +#define CCDC_CCDCFG_TRGSEL_SHIFT 9 +#define CCDC_CCDCFG_EXTRG_SHIFT 10 +#define CCDC_CCDCFG_MSBINVI_SHIFT 13 + +#define CCDC_HSIZE_FLIP_SHIFT 12 +#define CCDC_HSIZE_FLIP_MASK 1 +#define CCDC_HSIZE_VAL_MASK 0xFFF +#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 +#define CCDC_SDOFST_INTERLACE_INVERSE 0x4B6D +#define CCDC_SDOFST_INTERLACE_NORMAL 0x0B6D +#define CCDC_SDOFST_PROGRESSIVE_INVERSE 0x4000 +#define CCDC_SDOFST_PROGRESSIVE_NORMAL 0 +#define CCDC_START_PX_HOR_MASK 0x7FFF +#define CCDC_NUM_PX_HOR_MASK 0x7FFF +#define CCDC_START_VER_ONE_MASK 0x7FFF +#define CCDC_START_VER_TWO_MASK 0x7FFF +#define CCDC_NUM_LINES_VER 0x7FFF + +#define CCDC_BLK_CLAMP_ENABLE (1 << 15) +#define CCDC_BLK_SGAIN_MASK 0x1F +#define CCDC_BLK_ST_PXL_MASK 0x1FFF +#define CCDC_BLK_SAMPLE_LN_MASK 3 +#define CCDC_BLK_SAMPLE_LN_SHIFT 13 + +#define CCDC_NUM_LINE_CALC_MASK 3 +#define CCDC_NUM_LINE_CALC_SHIFT 14 + +#define CCDC_BLK_DC_SUB_MASK 0x3FFF +#define CCDC_BLK_COMP_MASK 0xFF +#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 +#define CCDC_BLK_COMP_GR_COMP_SHIFT 0 +#define CCDC_BLK_COMP_R_COMP_SHIFT 8 +#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) +#define CCDC_LATCH_ON_VSYNC_ENABLE (0 << 15) +#define CCDC_FPC_ENABLE (1 << 15) +#define CCDC_FPC_FPC_NUM_MASK 0x7FFF +#define CCDC_DATA_PACK_ENABLE (1 << 11) +#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 +#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 +#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF +#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 +#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF +#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define CCDC_VP_OUT_HORZ_ST_MASK 0xF + +#define CCDC_CSC_COEF_INTEG_MASK 7 +#define CCDC_CSC_COEF_DECIMAL_MASK 0x1f +#define CCDC_CSC_COEF_INTEG_SHIFT 5 +#define CCDC_CSCM_MSB_SHIFT 8 +#define CCDC_CSC_ENABLE 1 +#define CCDC_CSC_DEC_MAX 32 + +#define CCDC_MFILT1_SHIFT 10 +#define CCDC_MFILT2_SHIFT 8 +#define CCDC_MED_FILT_THRESH 0x3FFF +#define CCDC_LPF_MASK 1 +#define CCDC_LPF_SHIFT 14 +#define CCDC_OFFSET_MASK 0x3FF +#define CCDC_DATASFT_MASK 7 +#define CCDC_DATASFT_SHIFT 8 + +#define CCDC_DF_ENABLE 1 + +#define CCDC_FMTPLEN_P0_MASK 0xF +#define CCDC_FMTPLEN_P1_MASK 0xF +#define CCDC_FMTPLEN_P2_MASK 7 +#define CCDC_FMTPLEN_P3_MASK 7 +#define CCDC_FMTPLEN_P0_SHIFT 0 +#define CCDC_FMTPLEN_P1_SHIFT 4 +#define CCDC_FMTPLEN_P2_SHIFT 8 +#define CCDC_FMTPLEN_P3_SHIFT 12 + +#define CCDC_FMTSPH_MASK 0x1FFF +#define CCDC_FMTLNH_MASK 0x1FFF +#define CCDC_FMTSLV_MASK 0x1FFF +#define CCDC_FMTLNV_MASK 0x7FFF +#define CCDC_FMTRLEN_MASK 0x1FFF +#define CCDC_FMTHCNT_MASK 0x1FFF + +#define CCDC_ADP_INIT_MASK 0x1FFF +#define CCDC_ADP_LINE_SHIFT 13 +#define CCDC_ADP_LINE_MASK 3 +#define CCDC_FMTPGN_APTR_MASK 7 + +#define CCDC_DFCCTL_GDFCEN_MASK 1 +#define CCDC_DFCCTL_VDFCEN_MASK 1 +#define CCDC_DFCCTL_VDFC_DISABLE (0 << 4) +#define CCDC_DFCCTL_VDFCEN_SHIFT 4 +#define CCDC_DFCCTL_VDFCSL_MASK 3 +#define CCDC_DFCCTL_VDFCSL_SHIFT 5 +#define CCDC_DFCCTL_VDFCUDA_MASK 1 +#define CCDC_DFCCTL_VDFCUDA_SHIFT 7 +#define CCDC_DFCCTL_VDFLSFT_MASK 3 +#define CCDC_DFCCTL_VDFLSFT_SHIFT 8 +#define CCDC_DFCMEMCTL_DFCMARST_MASK 1 +#define CCDC_DFCMEMCTL_DFCMARST_SHIFT 2 +#define CCDC_DFCMEMCTL_DFCMWR_MASK 1 +#define CCDC_DFCMEMCTL_DFCMWR_SHIFT 0 +#define CCDC_DFCMEMCTL_INC_ADDR (0 << 2) + +#define CCDC_LSCCFG_GFTSF_MASK 7 +#define CCDC_LSCCFG_GFTSF_SHIFT 1 +#define CCDC_LSCCFG_GFTINV_MASK 0xf +#define CCDC_LSCCFG_GFTINV_SHIFT 4 +#define CCDC_LSC_GFTABLE_SEL_MASK 3 +#define CCDC_LSC_GFTABLE_EPEL_SHIFT 8 +#define CCDC_LSC_GFTABLE_OPEL_SHIFT 10 +#define CCDC_LSC_GFTABLE_EPOL_SHIFT 12 +#define CCDC_LSC_GFTABLE_OPOL_SHIFT 14 +#define CCDC_LSC_GFMODE_MASK 3 +#define CCDC_LSC_GFMODE_SHIFT 4 +#define CCDC_LSC_DISABLE 0 +#define CCDC_LSC_ENABLE 1 +#define CCDC_LSC_TABLE1_SLC 0 +#define CCDC_LSC_TABLE2_SLC 1 +#define CCDC_LSC_TABLE3_SLC 2 +#define CCDC_LSC_MEMADDR_RESET (1 << 2) +#define CCDC_LSC_MEMADDR_INCR (0 << 2) +#define CCDC_LSC_FRAC_MASK_T1 0xFF +#define CCDC_LSC_INT_MASK 3 +#define CCDC_LSC_FRAC_MASK 0x3FFF +#define CCDC_LSC_CENTRE_MASK 0x3FFF +#define CCDC_LSC_COEF_MASK 0xff +#define CCDC_LSC_COEFL_SHIFT 0 +#define CCDC_LSC_COEFU_SHIFT 8 +#define CCDC_GAIN_MASK 0x7FF +#define CCDC_SYNCEN_VDHDEN_MASK (1 << 0) +#define CCDC_SYNCEN_WEN_MASK (1 << 1) +#define CCDC_SYNCEN_WEN_SHIFT 1 + +/* Power on Defaults in hardware */ +#define MODESET_DEFAULT 0x200 +#define CULH_DEFAULT 0xFFFF +#define CULV_DEFAULT 0xFF +#define GAIN_DEFAULT 256 +#define OUTCLIP_DEFAULT 0x3FFF +#define LSCCFG2_DEFAULT 0xE + +#endif diff --git a/drivers/media/platform/davinci/dm644x_ccdc.c b/drivers/media/platform/davinci/dm644x_ccdc.c new file mode 100644 index 00000000..30fa0840 --- /dev/null +++ b/drivers/media/platform/davinci/dm644x_ccdc.c @@ -0,0 +1,1044 @@ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * CCDC hardware module for DM6446 + * ------------------------------ + * + * This module is for configuring CCD controller of DM6446 VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Raw Bayer RGB data, before writing it to SDRAM. This + * module also allows application to configure individual + * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL. + * To do so, application includes dm644x_ccdc.h and vpfe_capture.h header + * files. The setparams() API is called by vpfe_capture driver + * to configure module parameters. This file is named DM644x so that other + * variants such DM6443 may be supported using the same module. + * + * TODO: Test Raw bayer parameter settings and bayer capture + * Split module parameter structure to module specific ioctl structs + * investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "dm644x_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM6446"); +MODULE_AUTHOR("Texas Instruments"); + +static struct ccdc_oper_config { + struct device *dev; + /* CCDC interface type */ + enum vpfe_hw_if_type if_type; + /* Raw Bayer configuration */ + struct ccdc_params_raw bayer; + /* YCbCr configuration */ + struct ccdc_params_ycbcr ycbcr; + /* ccdc base address */ + void __iomem *base_addr; +} ccdc_cfg = { + /* Raw configurations */ + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .config_params = { + .data_sz = CCDC_DATA_10BITS, + }, + }, + .ycbcr = { + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .win = CCDC_WIN_PAL, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED + }, +}; + +#define CCDC_MAX_RAW_YUV_FORMATS 2 + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* CCDC Save/Restore context */ +static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)]; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_cfg.base_addr + offset); +} + +static void ccdc_enable(int flag) +{ + regw(flag, CCDC_PCR); +} + +static void ccdc_enable_vport(int flag) +{ + if (flag) + /* enable video port */ + regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG); + else + regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG); +} + +/* + * ccdc_setwin() + * This function will configure the window size + * to be capture in CCDC reg + */ +void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, + int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int val = 0, mid_img = 0; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = (image_win->width << (ppc - 1)) - 1; + regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels, + CCDC_HORZ_INFO); + + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 */ + val = (vert_start << CCDC_VDINT_VDINT0_SHIFT); + regw(val, CCDC_VDINT); + + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* + * configure VDINT0 and VDINT1. VDINT1 will be at half + * of image height + */ + mid_img = vert_start + (image_win->height / 2); + val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) | + (mid_img & CCDC_VDINT_VDINT1_MASK); + regw(val, CCDC_VDINT); + + } + regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start, + CCDC_VERT_START); + regw(vert_nr_lines, CCDC_VERT_LINES); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); +} + +static void ccdc_readregs(void) +{ + unsigned int val = 0; + + val = regr(CCDC_ALAW); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val); + val = regr(CCDC_CLAMP); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val); + val = regr(CCDC_DCSUB); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val); + val = regr(CCDC_BLKCMP); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val); + val = regr(CCDC_FPC_ADDR); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val); + val = regr(CCDC_FPC); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val); + val = regr(CCDC_FMTCFG); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val); + val = regr(CCDC_COLPTN); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val); + val = regr(CCDC_FMT_HORZ); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val); + val = regr(CCDC_FMT_VERT); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val); + val = regr(CCDC_HSIZE_OFF); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val); + val = regr(CCDC_SDOFST); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val); + val = regr(CCDC_VP_OUT); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val); + val = regr(CCDC_SYN_MODE); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val); + val = regr(CCDC_HORZ_INFO); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val); + val = regr(CCDC_VERT_START); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val); + val = regr(CCDC_VERT_LINES); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val); +} + +static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) +{ + if (ccdcparam->alaw.enable) { + u8 max_gamma = ccdc_gamma_width_max_bit(ccdcparam->alaw.gamma_wd); + u8 max_data = ccdc_data_size_max_bit(ccdcparam->data_sz); + + if ((ccdcparam->alaw.gamma_wd > CCDC_GAMMA_BITS_09_0) || + (ccdcparam->alaw.gamma_wd < CCDC_GAMMA_BITS_15_6) || + (max_gamma > max_data)) { + dev_dbg(ccdc_cfg.dev, "\nInvalid data line select"); + return -1; + } + } + return 0; +} + +static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int *fpc_virtaddr = NULL; + unsigned int *fpc_physaddr = NULL; + + memcpy(config_params, raw_params, sizeof(*raw_params)); + /* + * allocate memory for fault pixel table and copy the user + * values to the table + */ + if (!config_params->fault_pxl.enable) + return 0; + + fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr; + fpc_virtaddr = (unsigned int *)phys_to_virt( + (unsigned long)fpc_physaddr); + /* + * Allocate memory for FPC table if current + * FPC table buffer is not big enough to + * accommodate FPC Number requested + */ + if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) { + if (fpc_physaddr != NULL) { + free_pages((unsigned long)fpc_physaddr, + get_order + (config_params->fault_pxl.fp_num * + FP_NUM_BYTES)); + } + + /* Allocate memory for FPC table */ + fpc_virtaddr = + (unsigned int *)__get_free_pages(GFP_KERNEL | GFP_DMA, + get_order(raw_params-> + fault_pxl.fp_num * + FP_NUM_BYTES)); + + if (fpc_virtaddr == NULL) { + dev_dbg(ccdc_cfg.dev, + "\nUnable to allocate memory for FPC"); + return -EFAULT; + } + fpc_physaddr = + (unsigned int *)virt_to_phys((void *)fpc_virtaddr); + } + + /* Copy number of fault pixels and FPC table */ + config_params->fault_pxl.fp_num = raw_params->fault_pxl.fp_num; + if (copy_from_user(fpc_virtaddr, + (void __user *)raw_params->fault_pxl.fpc_table_addr, + config_params->fault_pxl.fp_num * FP_NUM_BYTES)) { + dev_dbg(ccdc_cfg.dev, "\n copy_from_user failed"); + return -EFAULT; + } + config_params->fault_pxl.fpc_table_addr = (unsigned int)fpc_physaddr; + return 0; +} + +static int ccdc_close(struct device *dev) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int *fpc_physaddr = NULL, *fpc_virtaddr = NULL; + + fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr; + + if (fpc_physaddr != NULL) { + fpc_virtaddr = (unsigned int *) + phys_to_virt((unsigned long)fpc_physaddr); + free_pages((unsigned long)fpc_virtaddr, + get_order(config_params->fault_pxl.fp_num * + FP_NUM_BYTES)); + } + return 0; +} + +/* + * ccdc_restore_defaults() + * This function will write defaults to all CCDC registers + */ +static void ccdc_restore_defaults(void) +{ + int i; + + /* disable CCDC */ + ccdc_enable(0); + /* set all registers to default value */ + for (i = 4; i <= 0x94; i += 4) + regw(0, i); + regw(CCDC_NO_CULLING, CCDC_CULLING); + regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW); +} + +static int ccdc_open(struct device *device) +{ + ccdc_restore_defaults(); + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_enable_vport(1); + return 0; +} + +static void ccdc_sbl_reset(void) +{ + vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O); +} + +/* Parameter operations */ +static int ccdc_set_params(void __user *params) +{ + struct ccdc_config_params_raw ccdc_raw_params; + int x; + + if (ccdc_cfg.if_type != VPFE_RAW_BAYER) + return -EINVAL; + + x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); + if (x) { + dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying" + "ccdc params, %d\n", x); + return -EFAULT; + } + + if (!validate_ccdc_param(&ccdc_raw_params)) { + if (!ccdc_update_raw_params(&ccdc_raw_params)) + return 0; + } + return -EINVAL; +} + +/* + * ccdc_config_ycbcr() + * This function will configure CCDC for YCbCr video capture + */ +void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; + u32 syn_mode; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); + /* + * first restore the CCDC registers to default values + * This is important since we assume default values to be set in + * a lot of registers that we didn't touch + */ + ccdc_restore_defaults(); + + /* + * configure pixel format, frame format, configure video frame + * format, enable output to SDRAM, enable internal timing generator + * and 8bit pack mode + */ + syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) << + CCDC_SYN_MODE_INPMOD_SHIFT) | + ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) << + CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE | + CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF); + + /* + * configure the FID, VD, HD pin polarity, + * fld,hd pol positive, vd negative, 8-bit data + */ + syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE; + if (ccdc_cfg.if_type == VPFE_BT656_10BIT) + syn_mode |= CCDC_SYN_MODE_10BITS; + else + syn_mode |= CCDC_SYN_MODE_8BITS; + } else { + /* y/c external sync mode */ + syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + regw(syn_mode, CCDC_SYN_MODE); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* + * configure the order of y cb cr in SDRAM, and disable latch + * internal register on vsync + */ + if (ccdc_cfg.if_type == VPFE_BT656_10BIT) + regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | + CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT, + CCDC_CCDCFG); + else + regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | + CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); + + /* + * configure the horizontal line offset. This should be a + * on 32 byte boundary. So clear LSB 5 bits + */ + regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST); + + ccdc_sbl_reset(); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); +} + +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->enable) { + /* configure DCSub */ + val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK; + regw(val, CCDC_DCSUB); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val); + regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n"); + return; + } + /* + * Configure gain, Start pixel, No of line to be avg, + * No of pixel/line to be avg, & Enable the Black clamping + */ + val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) | + ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) << + CCDC_BLK_ST_PXL_SHIFT) | + ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) << + CCDC_BLK_SAMPLE_LINE_SHIFT) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE); + regw(val, CCDC_CLAMP); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val); + /* If Black clamping is enable then make dcsub 0 */ + regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n"); +} + +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = ((bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT) | + ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT)); + regw(val, CCDC_BLKCMP); +} + +static void ccdc_config_fpc(struct ccdc_fault_pixel *fpc) +{ + u32 val; + + /* Initially disable FPC */ + val = CCDC_FPC_DISABLE; + regw(val, CCDC_FPC); + + if (!fpc->enable) + return; + + /* Configure Fault pixel if needed */ + regw(fpc->fpc_table_addr, CCDC_FPC_ADDR); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC_ADDR...\n", + (fpc->fpc_table_addr)); + /* Write the FPC params with FPC disable */ + val = fpc->fp_num & CCDC_FPC_FPC_NUM_MASK; + regw(val, CCDC_FPC); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val); + /* read the FPC register */ + val = regr(CCDC_FPC) | CCDC_FPC_ENABLE; + regw(val, CCDC_FPC); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val); +} + +/* + * ccdc_config_raw() + * This function will configure CCDC for Raw capture mode + */ +void ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_cfg.bayer; + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int syn_mode = 0; + unsigned int val; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); + + /* Reset CCDC */ + ccdc_restore_defaults(); + + /* Disable latching function registers on VSYNC */ + regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); + + /* + * Configure the vertical sync polarity(SYN_MODE.VDPOL), + * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity + * (SYN_MODE.FLDPOL), frame format(progressive or interlace), + * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output + * SDRAM, enable internal timing generator + */ + syn_mode = + (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | + ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | + ((config_params->data_sz & CCDC_DATA_SZ_MASK) << + CCDC_DATA_SZ_SHIFT) | + ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) | + CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE); + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val = ((config_params->alaw.gamma_wd & + CCDC_ALAW_GAMMA_WD_MASK) | CCDC_ALAW_ENABLE); + regw(val, CCDC_ALAW); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val); + } + + /* Configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, CCDC_PPC_RAW); + + /* Configure Black Clamp */ + ccdc_config_black_clamp(&config_params->blk_clamp); + + /* Configure Black level compensation */ + ccdc_config_black_compense(&config_params->blk_comp); + + /* Configure Fault Pixel Correction */ + ccdc_config_fpc(&config_params->fault_pxl); + + /* If data size is 8 bit then pack the data */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + syn_mode |= CCDC_DATA_PACK_ENABLE; + +#ifdef CONFIG_DM644X_VIDEO_PORT_ENABLE + /* enable video port */ + val = CCDC_ENABLE_VIDEO_PORT; +#else + /* disable video port */ + val = CCDC_DISABLE_VIDEO_PORT; +#endif + + if (config_params->data_sz == CCDC_DATA_8BITS) + val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK) + << CCDC_FMTCFG_VPIN_SHIFT; + else + val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK) + << CCDC_FMTCFG_VPIN_SHIFT; + /* Write value in FMTCFG */ + regw(val, CCDC_FMTCFG); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val); + /* Configure the color pattern according to mt9t001 sensor */ + regw(CCDC_COLPTN_VAL, CCDC_COLPTN); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n"); + /* + * Configure Data formatter(Video port) pixel selection + * (FMT_HORZ, FMT_VERT) + */ + val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) << + CCDC_FMT_HORZ_FMTSPH_SHIFT) | + (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK); + regw(val, CCDC_FMT_HORZ); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val); + val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK) + << CCDC_FMT_VERT_FMTSLV_SHIFT; + if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK; + else + val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK; + + dev_dbg(ccdc_cfg.dev, "\nparams->win.height 0x%x ...\n", + params->win.height); + regw(val, CCDC_FMT_VERT); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val); + + dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)..."); + + /* + * Configure Horizontal offset register. If pack 8 is enabled then + * 1 pixel will take 1 byte + */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) & + CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF); + else + /* else one pixel will take 2 byte */ + regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) + + CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK, + CCDC_HSIZE_OFF); + + /* Set value for SDOFST */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For intelace inverse mode */ + regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n"); + } + + else { + /* For intelace non inverse mode */ + regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n"); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n"); + } + + /* + * Configure video port pixel selection (VPOUT) + * Here -1 is to make the height value less than FMT_VERT.FMTLNV + */ + if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK)) + << CCDC_VP_OUT_VERT_NUM_SHIFT; + else + val = + ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) - + 1) & CCDC_VP_OUT_VERT_NUM_MASK)) << + CCDC_VP_OUT_VERT_NUM_SHIFT; + + val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK) + << CCDC_VP_OUT_HORZ_NUM_SHIFT; + val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK; + regw(val, CCDC_VP_OUT); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val); + regw(syn_mode, CCDC_SYN_MODE); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode); + + ccdc_sbl_reset(); + dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); + ccdc_readregs(); +} + +static int ccdc_configure(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_config_raw(); + else + ccdc_config_ycbcr(); + return 0; +} + +static int ccdc_set_buftype(enum ccdc_buftype buf_type) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.buf_type = buf_type; + else + ccdc_cfg.ycbcr.buf_type = buf_type; + return 0; +} + +static enum ccdc_buftype ccdc_get_buftype(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.buf_type; + return ccdc_cfg.ycbcr.buf_type; +} + +static int ccdc_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { + *pix = ccdc_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { + *pix = ccdc_raw_yuv_pix_formats[i]; + ret = 0; + } + } + return ret; +} + +static int ccdc_set_pixel_format(u32 pixfmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + if (pixfmt == V4L2_PIX_FMT_SBGGR8) + ccdc_cfg.bayer.config_params.alaw.enable = 1; + else if (pixfmt != V4L2_PIX_FMT_SBGGR16) + return -EINVAL; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + } + return 0; +} + +static u32 ccdc_get_pixel_format(void) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + u32 pixfmt; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + if (alaw->enable) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} + +static int ccdc_set_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.win = *win; + else + ccdc_cfg.ycbcr.win = *win; + return 0; +} + +static void ccdc_get_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + *win = ccdc_cfg.bayer.win; + else + *win = ccdc_cfg.ycbcr.win; +} + +static unsigned int ccdc_get_line_length(void) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int len; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if ((config_params->alaw.enable) || + (config_params->data_sz == CCDC_DATA_8BITS)) + len = ccdc_cfg.bayer.win.width; + else + len = ccdc_cfg.bayer.win.width * 2; + } else + len = ccdc_cfg.ycbcr.win.width * 2; + return ALIGN(len, 32); +} + +static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.frm_fmt = frm_fmt; + else + ccdc_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} + +static enum ccdc_frmfmt ccdc_get_frame_format(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.frm_fmt; + else + return ccdc_cfg.ycbcr.frm_fmt; +} + +static int ccdc_getfid(void) +{ + return (regr(CCDC_SYN_MODE) >> 15) & 1; +} + +/* misc operations */ +static inline void ccdc_setfbaddr(unsigned long addr) +{ + regw(addr & 0xffffffe0, CCDC_SDR_ADDR); +} + +static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + ccdc_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + case VPFE_BT656_10BIT: + ccdc_cfg.ycbcr.vd_pol = params->vdpol; + ccdc_cfg.ycbcr.hd_pol = params->hdpol; + break; + default: + /* TODO add support for raw bayer here */ + return -EINVAL; + } + return 0; +} + +static void ccdc_save_context(void) +{ + ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR); + ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE); + ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID); + ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES); + ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO); + ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START); + ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES); + ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING); + ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF); + ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST); + ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR); + ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP); + ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB); + ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN); + ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP); + ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC); + ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR); + ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT); + ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW); + ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF); + ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG); + ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG); + ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ); + ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT); + ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0); + ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1); + ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2); + ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3); + ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4); + ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5); + ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6); + ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7); + ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0); + ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1); + ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0); + ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1); + ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT); +} + +static void ccdc_restore_context(void) +{ + regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE); + regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID); + regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES); + regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO); + regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START); + regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES); + regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING); + regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF); + regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST); + regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR); + regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP); + regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB); + regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN); + regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP); + regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC); + regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR); + regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT); + regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW); + regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF); + regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG); + regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG); + regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ); + regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT); + regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0); + regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1); + regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2); + regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3); + regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4); + regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5); + regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6); + regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7); + regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0); + regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1); + regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0); + regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1); + regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT); + regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR); +} +static struct ccdc_hw_device ccdc_hw_dev = { + .name = "DM6446 CCDC", + .owner = THIS_MODULE, + .hw_ops = { + .open = ccdc_open, + .close = ccdc_close, + .reset = ccdc_sbl_reset, + .enable = ccdc_enable, + .set_hw_if_params = ccdc_set_hw_if_params, + .set_params = ccdc_set_params, + .configure = ccdc_configure, + .set_buftype = ccdc_set_buftype, + .get_buftype = ccdc_get_buftype, + .enum_pix = ccdc_enum_pix, + .set_pixel_format = ccdc_set_pixel_format, + .get_pixel_format = ccdc_get_pixel_format, + .set_frame_format = ccdc_set_frame_format, + .get_frame_format = ccdc_get_frame_format, + .set_image_window = ccdc_set_image_window, + .get_image_window = ccdc_get_image_window, + .get_line_length = ccdc_get_line_length, + .setfbaddr = ccdc_setfbaddr, + .getfid = ccdc_getfid, + }, +}; + +static int dm644x_ccdc_probe(struct platform_device *pdev) +{ + struct resource *res; + int status = 0; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&ccdc_hw_dev); + if (status < 0) + return status; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + status = -ENODEV; + goto fail_nores; + } + + res = request_mem_region(res->start, resource_size(res), res->name); + if (!res) { + status = -EBUSY; + goto fail_nores; + } + + ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res)); + if (!ccdc_cfg.base_addr) { + status = -ENOMEM; + goto fail_nomem; + } + + ccdc_cfg.dev = &pdev->dev; + printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); + return 0; +fail_nomem: + release_mem_region(res->start, resource_size(res)); +fail_nores: + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return status; +} + +static int dm644x_ccdc_remove(struct platform_device *pdev) +{ + struct resource *res; + + iounmap(ccdc_cfg.base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, resource_size(res)); + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return 0; +} + +static int dm644x_ccdc_suspend(struct device *dev) +{ + /* Save CCDC context */ + ccdc_save_context(); + /* Disable CCDC */ + ccdc_enable(0); + + return 0; +} + +static int dm644x_ccdc_resume(struct device *dev) +{ + /* Restore CCDC context */ + ccdc_restore_context(); + + return 0; +} + +static const struct dev_pm_ops dm644x_ccdc_pm_ops = { + .suspend = dm644x_ccdc_suspend, + .resume = dm644x_ccdc_resume, +}; + +static struct platform_driver dm644x_ccdc_driver = { + .driver = { + .name = "dm644x_ccdc", + .owner = THIS_MODULE, + .pm = &dm644x_ccdc_pm_ops, + }, + .remove = dm644x_ccdc_remove, + .probe = dm644x_ccdc_probe, +}; + +module_platform_driver(dm644x_ccdc_driver); diff --git a/drivers/media/platform/davinci/dm644x_ccdc_regs.h b/drivers/media/platform/davinci/dm644x_ccdc_regs.h new file mode 100644 index 00000000..2b0aca53 --- /dev/null +++ b/drivers/media/platform/davinci/dm644x_ccdc_regs.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _DM644X_CCDC_REGS_H +#define _DM644X_CCDC_REGS_H + +/**************************************************************************\ +* Register OFFSET Definitions +\**************************************************************************/ +#define CCDC_PID 0x0 +#define CCDC_PCR 0x4 +#define CCDC_SYN_MODE 0x8 +#define CCDC_HD_VD_WID 0xc +#define CCDC_PIX_LINES 0x10 +#define CCDC_HORZ_INFO 0x14 +#define CCDC_VERT_START 0x18 +#define CCDC_VERT_LINES 0x1c +#define CCDC_CULLING 0x20 +#define CCDC_HSIZE_OFF 0x24 +#define CCDC_SDOFST 0x28 +#define CCDC_SDR_ADDR 0x2c +#define CCDC_CLAMP 0x30 +#define CCDC_DCSUB 0x34 +#define CCDC_COLPTN 0x38 +#define CCDC_BLKCMP 0x3c +#define CCDC_FPC 0x40 +#define CCDC_FPC_ADDR 0x44 +#define CCDC_VDINT 0x48 +#define CCDC_ALAW 0x4c +#define CCDC_REC656IF 0x50 +#define CCDC_CCDCFG 0x54 +#define CCDC_FMTCFG 0x58 +#define CCDC_FMT_HORZ 0x5c +#define CCDC_FMT_VERT 0x60 +#define CCDC_FMT_ADDR0 0x64 +#define CCDC_FMT_ADDR1 0x68 +#define CCDC_FMT_ADDR2 0x6c +#define CCDC_FMT_ADDR3 0x70 +#define CCDC_FMT_ADDR4 0x74 +#define CCDC_FMT_ADDR5 0x78 +#define CCDC_FMT_ADDR6 0x7c +#define CCDC_FMT_ADDR7 0x80 +#define CCDC_PRGEVEN_0 0x84 +#define CCDC_PRGEVEN_1 0x88 +#define CCDC_PRGODD_0 0x8c +#define CCDC_PRGODD_1 0x90 +#define CCDC_VP_OUT 0x94 +#define CCDC_REG_END 0x98 + +/*************************************************************** +* Define for various register bit mask and shifts for CCDC +****************************************************************/ +#define CCDC_FID_POL_MASK 1 +#define CCDC_FID_POL_SHIFT 4 +#define CCDC_HD_POL_MASK 1 +#define CCDC_HD_POL_SHIFT 3 +#define CCDC_VD_POL_MASK 1 +#define CCDC_VD_POL_SHIFT 2 +#define CCDC_HSIZE_OFF_MASK 0xffffffe0 +#define CCDC_32BYTE_ALIGN_VAL 31 +#define CCDC_FRM_FMT_MASK 0x1 +#define CCDC_FRM_FMT_SHIFT 7 +#define CCDC_DATA_SZ_MASK 7 +#define CCDC_DATA_SZ_SHIFT 8 +#define CCDC_PIX_FMT_MASK 3 +#define CCDC_PIX_FMT_SHIFT 12 +#define CCDC_VP2SDR_DISABLE 0xFFFBFFFF +#define CCDC_WEN_ENABLE (1 << 17) +#define CCDC_SDR2RSZ_DISABLE 0xFFF7FFFF +#define CCDC_VDHDEN_ENABLE (1 << 16) +#define CCDC_LPF_ENABLE (1 << 14) +#define CCDC_ALAW_ENABLE (1 << 3) +#define CCDC_ALAW_GAMMA_WD_MASK 7 +#define CCDC_BLK_CLAMP_ENABLE (1 << 31) +#define CCDC_BLK_SGAIN_MASK 0x1F +#define CCDC_BLK_ST_PXL_MASK 0x7FFF +#define CCDC_BLK_ST_PXL_SHIFT 10 +#define CCDC_BLK_SAMPLE_LN_MASK 7 +#define CCDC_BLK_SAMPLE_LN_SHIFT 28 +#define CCDC_BLK_SAMPLE_LINE_MASK 7 +#define CCDC_BLK_SAMPLE_LINE_SHIFT 25 +#define CCDC_BLK_DC_SUB_MASK 0x03FFF +#define CCDC_BLK_COMP_MASK 0xFF +#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 +#define CCDC_BLK_COMP_GR_COMP_SHIFT 16 +#define CCDC_BLK_COMP_R_COMP_SHIFT 24 +#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) +#define CCDC_FPC_ENABLE (1 << 15) +#define CCDC_FPC_DISABLE 0 +#define CCDC_FPC_FPC_NUM_MASK 0x7FFF +#define CCDC_DATA_PACK_ENABLE (1 << 11) +#define CCDC_FMTCFG_VPIN_MASK 7 +#define CCDC_FMTCFG_VPIN_SHIFT 12 +#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 +#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 +#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF +#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 +#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF +#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define CCDC_VP_OUT_HORZ_ST_MASK 0xF +#define CCDC_HORZ_INFO_SPH_SHIFT 16 +#define CCDC_VERT_START_SLV0_SHIFT 16 +#define CCDC_VDINT_VDINT0_SHIFT 16 +#define CCDC_VDINT_VDINT1_MASK 0xFFFF +#define CCDC_PPC_RAW 1 +#define CCDC_DCSUB_DEFAULT_VAL 0 +#define CCDC_CLAMP_DEFAULT_VAL 0 +#define CCDC_ENABLE_VIDEO_PORT 0x8000 +#define CCDC_DISABLE_VIDEO_PORT 0 +#define CCDC_COLPTN_VAL 0xBB11BB11 +#define CCDC_TWO_BYTES_PER_PIXEL 2 +#define CCDC_INTERLACED_IMAGE_INVERT 0x4B6D +#define CCDC_INTERLACED_NO_IMAGE_INVERT 0x0249 +#define CCDC_PROGRESSIVE_IMAGE_INVERT 0x4000 +#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT 0 +#define CCDC_INTERLACED_HEIGHT_SHIFT 1 +#define CCDC_SYN_MODE_INPMOD_SHIFT 12 +#define CCDC_SYN_MODE_INPMOD_MASK 3 +#define CCDC_SYN_MODE_8BITS (7 << 8) +#define CCDC_SYN_MODE_10BITS (6 << 8) +#define CCDC_SYN_MODE_11BITS (5 << 8) +#define CCDC_SYN_MODE_12BITS (4 << 8) +#define CCDC_SYN_MODE_13BITS (3 << 8) +#define CCDC_SYN_MODE_14BITS (2 << 8) +#define CCDC_SYN_MODE_15BITS (1 << 8) +#define CCDC_SYN_MODE_16BITS (0 << 8) +#define CCDC_SYN_FLDMODE_MASK 1 +#define CCDC_SYN_FLDMODE_SHIFT 7 +#define CCDC_REC656IF_BT656_EN 3 +#define CCDC_SYN_MODE_VD_POL_NEGATIVE (1 << 2) +#define CCDC_CCDCFG_Y8POS_SHIFT 11 +#define CCDC_CCDCFG_BW656_10BIT (1 << 5) +#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 +#define CCDC_NO_CULLING 0xffff00ff +#endif diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c new file mode 100644 index 00000000..3332cca6 --- /dev/null +++ b/drivers/media/platform/davinci/isif.c @@ -0,0 +1,1145 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Image Sensor Interface (ISIF) driver + * + * This driver is for configuring the ISIF IP available on DM365 or any other + * TI SoCs. This is used for capturing yuv or bayer video or image data + * from a decoder or sensor. This IP is similar to the CCDC IP on DM355 + * and DM6446, but with enhanced or additional ip blocks. The driver + * configures the ISIF upon commands from the vpfe bridge driver through + * ccdc_hw_device interface. + * + * TODO: 1) Raw bayer parameter settings and bayer capture + * 2) Add support for control ioctl + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "isif_regs.h" +#include "ccdc_hw_device.h" + +/* Defaults for module configuration parameters */ +static struct isif_config_params_raw isif_config_defaults = { + .linearize = { + .en = 0, + .corr_shft = ISIF_NO_SHIFT, + .scale_fact = {1, 0}, + }, + .df_csc = { + .df_or_csc = 0, + .csc = { + .en = 0, + }, + }, + .dfc = { + .en = 0, + }, + .bclamp = { + .en = 0, + }, + .gain_offset = { + .gain = { + .r_ye = {1, 0}, + .gr_cy = {1, 0}, + .gb_g = {1, 0}, + .b_mg = {1, 0}, + }, + }, + .culling = { + .hcpat_odd = 0xff, + .hcpat_even = 0xff, + .vcpat = 0xff, + }, + .compress = { + .alg = ISIF_ALAW, + }, +}; + +/* ISIF operation configuration */ +static struct isif_oper_config { + struct device *dev; + enum vpfe_hw_if_type if_type; + struct isif_ycbcr_config ycbcr; + struct isif_params_raw bayer; + enum isif_data_pack data_pack; + /* ISIF base address */ + void __iomem *base_addr; + /* ISIF Linear Table 0 */ + void __iomem *linear_tbl0_addr; + /* ISIF Linear Table 1 */ + void __iomem *linear_tbl1_addr; +} isif_cfg = { + .ycbcr = { + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .win = ISIF_WIN_NTSC, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED, + }, + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = ISIF_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .gain = { + .r_ye = {1, 0}, + .gr_cy = {1, 0}, + .gb_g = {1, 0}, + .b_mg = {1, 0}, + }, + .cfa_pat = ISIF_CFA_PAT_MOSAIC, + .data_msb = ISIF_BIT_MSB_11, + .config_params = { + .data_shift = ISIF_NO_SHIFT, + .col_pat_field0 = { + .olop = ISIF_GREEN_BLUE, + .olep = ISIF_BLUE, + .elop = ISIF_RED, + .elep = ISIF_GREEN_RED, + }, + .col_pat_field1 = { + .olop = ISIF_GREEN_BLUE, + .olep = ISIF_BLUE, + .elop = ISIF_RED, + .elep = ISIF_GREEN_RED, + }, + .test_pat_gen = 0, + }, + }, + .data_pack = ISIF_DATA_PACK8, +}; + +/* Raw Bayer formats */ +static const u32 isif_raw_bayer_pix_formats[] = { + V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static const u32 isif_raw_yuv_pix_formats[] = { + V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(isif_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, isif_cfg.base_addr + offset); +} + +/* reg_modify() - read, modify and write register */ +static inline u32 reg_modify(u32 mask, u32 val, u32 offset) +{ + u32 new_val = (regr(offset) & ~mask) | (val & mask); + + regw(new_val, offset); + return new_val; +} + +static inline void regw_lin_tbl(u32 val, u32 offset, int i) +{ + if (!i) + __raw_writel(val, isif_cfg.linear_tbl0_addr + offset); + else + __raw_writel(val, isif_cfg.linear_tbl1_addr + offset); +} + +static void isif_disable_all_modules(void) +{ + /* disable BC */ + regw(0, CLAMPCFG); + /* disable vdfc */ + regw(0, DFCCTL); + /* disable CSC */ + regw(0, CSCCTL); + /* disable linearization */ + regw(0, LINCFG0); + /* disable other modules here as they are supported */ +} + +static void isif_enable(int en) +{ + if (!en) { + /* Before disable isif, disable all ISIF modules */ + isif_disable_all_modules(); + /* + * wait for next VD. Assume lowest scan rate is 12 Hz. So + * 100 msec delay is good enough + */ + msleep(100); + } + reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN); +} + +static void isif_enable_output_to_sdram(int en) +{ + reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN); +} + +static void isif_config_culling(struct isif_cul *cul) +{ + u32 val; + + /* Horizontal pattern */ + val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd; + regw(val, CULH); + + /* vertical pattern */ + regw(cul->vcpat, CULV); + + /* LPF */ + reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT, + cul->en_lpf << ISIF_LPF_SHIFT, MODESET); +} + +static void isif_config_gain_offset(void) +{ + struct isif_gain_offsets_adj *gain_off_p = + &isif_cfg.bayer.config_params.gain_offset; + u32 val; + + val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) | + (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) | + (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) | + (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) | + (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) | + (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT); + + reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD); + + val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.r_ye.decimal; + regw(val, CRGAIN); + + val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.gr_cy.decimal; + regw(val, CGRGAIN); + + val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.gb_g.decimal; + regw(val, CGBGAIN); + + val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.b_mg.decimal; + regw(val, CBGAIN); + + regw(gain_off_p->offset, COFSTA); +} + +static void isif_restore_defaults(void) +{ + enum vpss_ccdc_source_sel source = VPSS_CCDCIN; + + dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults..."); + isif_cfg.bayer.config_params = isif_config_defaults; + /* Enable clock to ISIF, IPIPEIF and BL */ + vpss_enable_clock(VPSS_CCDC_CLOCK, 1); + vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1); + vpss_enable_clock(VPSS_BL_CLOCK, 1); + /* Set default offset and gain */ + isif_config_gain_offset(); + vpss_select_ccdc_source(source); + dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults..."); +} + +static int isif_open(struct device *device) +{ + isif_restore_defaults(); + return 0; +} + +/* This function will configure the window size to be capture in ISIF reg */ +static void isif_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int mid_img = 0; + + dev_dbg(isif_cfg.dev, "\nStarting isif_setwin..."); + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; + + /* Writing the horizontal info into the registers */ + regw(horz_start & START_PX_HOR_MASK, SPH); + regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH); + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* To account for VD since line 0 doesn't have any data */ + vert_start += 1; + } else { + /* To account for VD since line 0 doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* configure VDINT0 and VDINT1 */ + mid_img = vert_start + (image_win->height / 2); + regw(mid_img, VDINT1); + } + + regw(0, VDINT0); + regw(vert_start & START_VER_ONE_MASK, SLV0); + regw(vert_start & START_VER_TWO_MASK, SLV1); + regw(vert_nr_lines & NUM_LINES_VER, LNV); +} + +static void isif_config_bclamp(struct isif_black_clamp *bc) +{ + u32 val; + + /* + * DC Offset is always added to image data irrespective of bc enable + * status + */ + regw(bc->dc_offset, CLDCOFST); + + if (bc->en) { + val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; + + /* Enable BC and horizontal clamp caculation paramaters */ + val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); + + regw(val, CLAMPCFG); + + if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) { + /* + * Window count for calculation + * Base window selection + * pixel limit + * Horizontal size of window + * vertical size of the window + * Horizontal start position of the window + * Vertical start position of the window + */ + val = bc->horz.win_count_calc | + ((!!bc->horz.base_win_sel_calc) << + ISIF_HORZ_BC_WIN_SEL_SHIFT) | + ((!!bc->horz.clamp_pix_limit) << + ISIF_HORZ_BC_PIX_LIMIT_SHIFT) | + (bc->horz.win_h_sz_calc << + ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) | + (bc->horz.win_v_sz_calc << + ISIF_HORZ_BC_WIN_V_SIZE_SHIFT); + regw(val, CLHWIN0); + + regw(bc->horz.win_start_h_calc, CLHWIN1); + regw(bc->horz.win_start_v_calc, CLHWIN2); + } + + /* vertical clamp caculation paramaters */ + + /* Reset clamp value sel for previous line */ + val |= + (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) | + (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT); + regw(val, CLVWIN0); + + /* Optical Black horizontal start position */ + regw(bc->vert.ob_start_h, CLVWIN1); + /* Optical Black vertical start position */ + regw(bc->vert.ob_start_v, CLVWIN2); + /* Optical Black vertical size for calculation */ + regw(bc->vert.ob_v_sz_calc, CLVWIN3); + /* Vertical start position for BC subtraction */ + regw(bc->vert_start_sub, CLSV); + } +} + +static void isif_config_linearization(struct isif_linearize *linearize) +{ + u32 val, i; + + if (!linearize->en) { + regw(0, LINCFG0); + return; + } + + /* shift value for correction & enable linearization (set lsb) */ + val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1; + regw(val, LINCFG0); + + /* Scale factor */ + val = ((!!linearize->scale_fact.integer) << + ISIF_LIN_SCALE_FACT_INTEG_SHIFT) | + linearize->scale_fact.decimal; + regw(val, LINCFG1); + + for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) { + if (i % 2) + regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1); + else + regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0); + } +} + +static int isif_config_dfc(struct isif_dfc *vdfc) +{ + /* initialize retries to loop for max ~ 250 usec */ + u32 val, count, retries = loops_per_jiffy / (4000/HZ); + int i; + + if (!vdfc->en) + return 0; + + /* Correction mode */ + val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT); + + /* Correct whole line or partial */ + if (vdfc->corr_whole_line) + val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT; + + /* level shift value */ + val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT; + + regw(val, DFCCTL); + + /* Defect saturation level */ + regw(vdfc->def_sat_level, VDFSATLV); + + regw(vdfc->table[0].pos_vert, DFCMEM0); + regw(vdfc->table[0].pos_horz, DFCMEM1); + if (vdfc->corr_mode == ISIF_VDFC_NORMAL || + vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { + regw(vdfc->table[0].level_at_pos, DFCMEM2); + regw(vdfc->table[0].level_up_pixels, DFCMEM3); + regw(vdfc->table[0].level_low_pixels, DFCMEM4); + } + + /* set DFCMARST and set DFCMWR */ + val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1; + regw(val, DFCMEMCTL); + + count = retries; + while (count && (regr(DFCMEMCTL) & 0x1)) + count--; + + if (!count) { + dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n"); + return -1; + } + + for (i = 1; i < vdfc->num_vdefects; i++) { + regw(vdfc->table[i].pos_vert, DFCMEM0); + regw(vdfc->table[i].pos_horz, DFCMEM1); + if (vdfc->corr_mode == ISIF_VDFC_NORMAL || + vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { + regw(vdfc->table[i].level_at_pos, DFCMEM2); + regw(vdfc->table[i].level_up_pixels, DFCMEM3); + regw(vdfc->table[i].level_low_pixels, DFCMEM4); + } + val = regr(DFCMEMCTL); + /* clear DFCMARST and set DFCMWR */ + val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT); + val |= 1; + regw(val, DFCMEMCTL); + + count = retries; + while (count && (regr(DFCMEMCTL) & 0x1)) + count--; + + if (!count) { + dev_err(isif_cfg.dev, + "defect table write timeout !!!\n"); + return -1; + } + } + if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) { + /* Extra cycle needed */ + regw(0, DFCMEM0); + regw(0x1FFF, DFCMEM1); + regw(1, DFCMEMCTL); + } + + /* enable VDFC */ + reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT), + DFCCTL); + return 0; +} + +static void isif_config_csc(struct isif_df_csc *df_csc) +{ + u32 val1 = 0, val2 = 0, i; + + if (!df_csc->csc.en) { + regw(0, CSCCTL); + return; + } + for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) { + if ((i % 2) == 0) { + /* CSCM - LSB */ + val1 = (df_csc->csc.coeff[i].integer << + ISIF_CSC_COEF_INTEG_SHIFT) | + df_csc->csc.coeff[i].decimal; + } else { + + /* CSCM - MSB */ + val2 = (df_csc->csc.coeff[i].integer << + ISIF_CSC_COEF_INTEG_SHIFT) | + df_csc->csc.coeff[i].decimal; + val2 <<= ISIF_CSCM_MSB_SHIFT; + val2 |= val1; + regw(val2, (CSCM0 + ((i - 1) << 1))); + } + } + + /* program the active area */ + regw(df_csc->start_pix, FMTSPH); + /* + * one extra pixel as required for CSC. Actually number of + * pixel - 1 should be configured in this register. So we + * need to subtract 1 before writing to FMTSPH, but we will + * not do this since csc requires one extra pixel + */ + regw(df_csc->num_pixels, FMTLNH); + regw(df_csc->start_line, FMTSLV); + /* + * one extra line as required for CSC. See reason documented for + * num_pixels + */ + regw(df_csc->num_lines, FMTLNV); + + /* Enable CSC */ + regw(1, CSCCTL); +} + +static int isif_config_raw(void) +{ + struct isif_params_raw *params = &isif_cfg.bayer; + struct isif_config_params_raw *module_params = + &isif_cfg.bayer.config_params; + struct vpss_pg_frame_size frame_size; + struct vpss_sync_pol sync; + u32 val; + + dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n"); + + /* + * Configure CCDCFG register:- + * Set CCD Not to swap input since input is RAW data + * Set FID detection function to Latch at V-Sync + * Set WENLOG - isif valid area + * Set TRGSEL + * Set EXTRG + * Packed to 8 or 16 bits + */ + + val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC | + ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN | + ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack; + + dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val); + regw(val, CCDCFG); + + /* + * Configure the vertical sync polarity(MODESET.VDPOL) + * Configure the horizontal sync polarity (MODESET.HDPOL) + * Configure frame id polarity (MODESET.FLDPOL) + * Configure data polarity + * Configure External WEN Selection + * Configure frame format(progressive or interlace) + * Configure pixel format (Input mode) + * Configure the data shift + */ + + val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) | + (params->hd_pol << ISIF_HD_POL_SHIFT) | + (params->fid_pol << ISIF_FID_POL_SHIFT) | + (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) | + (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) | + (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | + (params->pix_fmt << ISIF_INPUT_SHIFT) | + (params->config_params.data_shift << ISIF_DATASFT_SHIFT); + + regw(val, MODESET); + dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val); + + /* + * Configure GAMMAWD register + * CFA pattern setting + */ + val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT; + + /* Gamma msb */ + if (module_params->compress.alg == ISIF_ALAW) + val |= ISIF_ALAW_ENABLE; + + val |= (params->data_msb << ISIF_ALAW_GAMMA_WD_SHIFT); + regw(val, CGAMMAWD); + + /* Configure DPCM compression settings */ + if (module_params->compress.alg == ISIF_DPCM) { + val = BIT(ISIF_DPCM_EN_SHIFT) | + (module_params->compress.pred << + ISIF_DPCM_PREDICTOR_SHIFT); + } + + regw(val, MISC); + + /* Configure Gain & Offset */ + isif_config_gain_offset(); + + /* Configure Color pattern */ + val = (params->config_params.col_pat_field0.olop) | + (params->config_params.col_pat_field0.olep << 2) | + (params->config_params.col_pat_field0.elop << 4) | + (params->config_params.col_pat_field0.elep << 6) | + (params->config_params.col_pat_field1.olop << 8) | + (params->config_params.col_pat_field1.olep << 10) | + (params->config_params.col_pat_field1.elop << 12) | + (params->config_params.col_pat_field1.elep << 14); + regw(val, CCOLP); + dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val); + + /* Configure HSIZE register */ + val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT; + + /* calculate line offset in 32 bytes based on pack value */ + if (isif_cfg.data_pack == ISIF_PACK_8BIT) + val |= ((params->win.width + 31) >> 5); + else if (isif_cfg.data_pack == ISIF_PACK_12BIT) + val |= (((params->win.width + + (params->win.width >> 2)) + 31) >> 5); + else + val |= (((params->win.width * 2) + 31) >> 5); + regw(val, HSIZE); + + /* Configure SDOFST register */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_en) { + /* For interlace inverse mode */ + regw(0x4B6D, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n"); + } else { + /* For interlace non inverse mode */ + regw(0x0B6D, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n"); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + if (params->image_invert_en) { + /* For progressive inverse mode */ + regw(0x4000, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n"); + } else { + /* For progressive non inverse mode */ + regw(0x0000, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n"); + } + } + + /* Configure video window */ + isif_setwin(¶ms->win, params->frm_fmt, 1); + + /* Configure Black Clamp */ + isif_config_bclamp(&module_params->bclamp); + + /* Configure Vertical Defection Pixel Correction */ + if (isif_config_dfc(&module_params->dfc) < 0) + return -EFAULT; + + if (!module_params->df_csc.df_or_csc) + /* Configure Color Space Conversion */ + isif_config_csc(&module_params->df_csc); + + isif_config_linearization(&module_params->linearize); + + /* Configure Culling */ + isif_config_culling(&module_params->culling); + + /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */ + regw(module_params->horz_offset, DATAHOFST); + regw(module_params->vert_offset, DATAVOFST); + + /* Setup test pattern if enabled */ + if (params->config_params.test_pat_gen) { + /* Use the HD/VD pol settings from user */ + sync.ccdpg_hdpol = params->hd_pol; + sync.ccdpg_vdpol = params->vd_pol; + dm365_vpss_set_sync_pol(sync); + frame_size.hlpfr = isif_cfg.bayer.win.width; + frame_size.pplen = isif_cfg.bayer.win.height; + dm365_vpss_set_pg_frame_size(frame_size); + vpss_select_ccdc_source(VPSS_PGLPBK); + } + + dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n"); + return 0; +} + +static int isif_set_buftype(enum ccdc_buftype buf_type) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + isif_cfg.bayer.buf_type = buf_type; + else + isif_cfg.ycbcr.buf_type = buf_type; + + return 0; + +} +static enum ccdc_buftype isif_get_buftype(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_cfg.bayer.buf_type; + + return isif_cfg.ycbcr.buf_type; +} + +static int isif_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) { + *pix = isif_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) { + *pix = isif_raw_yuv_pix_formats[i]; + ret = 0; + } + } + + return ret; +} + +static int isif_set_pixel_format(unsigned int pixfmt) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (pixfmt == V4L2_PIX_FMT_SBGGR8) { + if ((isif_cfg.bayer.config_params.compress.alg != + ISIF_ALAW) && + (isif_cfg.bayer.config_params.compress.alg != + ISIF_DPCM)) { + dev_dbg(isif_cfg.dev, + "Either configure A-Law or DPCM\n"); + return -EINVAL; + } + isif_cfg.data_pack = ISIF_PACK_8BIT; + } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) { + isif_cfg.bayer.config_params.compress.alg = + ISIF_NO_COMPRESSION; + isif_cfg.data_pack = ISIF_PACK_16BIT; + } else + return -EINVAL; + isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + isif_cfg.data_pack = ISIF_PACK_8BIT; + } + return 0; +} + +static u32 isif_get_pixel_format(void) +{ + u32 pixfmt; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) + if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW || + isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} + +static int isif_set_image_window(struct v4l2_rect *win) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + isif_cfg.bayer.win.top = win->top; + isif_cfg.bayer.win.left = win->left; + isif_cfg.bayer.win.width = win->width; + isif_cfg.bayer.win.height = win->height; + } else { + isif_cfg.ycbcr.win.top = win->top; + isif_cfg.ycbcr.win.left = win->left; + isif_cfg.ycbcr.win.width = win->width; + isif_cfg.ycbcr.win.height = win->height; + } + return 0; +} + +static void isif_get_image_window(struct v4l2_rect *win) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + *win = isif_cfg.bayer.win; + else + *win = isif_cfg.ycbcr.win; +} + +static unsigned int isif_get_line_length(void) +{ + unsigned int len; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (isif_cfg.data_pack == ISIF_PACK_8BIT) + len = ((isif_cfg.bayer.win.width)); + else if (isif_cfg.data_pack == ISIF_PACK_12BIT) + len = (((isif_cfg.bayer.win.width * 2) + + (isif_cfg.bayer.win.width >> 2))); + else + len = (((isif_cfg.bayer.win.width * 2))); + } else + len = (((isif_cfg.ycbcr.win.width * 2))); + return ALIGN(len, 32); +} + +static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + isif_cfg.bayer.frm_fmt = frm_fmt; + else + isif_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} +static enum ccdc_frmfmt isif_get_frame_format(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_cfg.bayer.frm_fmt; + return isif_cfg.ycbcr.frm_fmt; +} + +static int isif_getfid(void) +{ + return (regr(MODESET) >> 15) & 0x1; +} + +/* misc operations */ +static void isif_setfbaddr(unsigned long addr) +{ + regw((addr >> 21) & 0x07ff, CADU); + regw((addr >> 5) & 0x0ffff, CADL); +} + +static int isif_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + isif_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_BT656_10BIT: + case VPFE_YCBCR_SYNC_8: + isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT; + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + break; + case VPFE_BT1120: + case VPFE_YCBCR_SYNC_16: + isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT; + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + break; + case VPFE_RAW_BAYER: + isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + break; + default: + dev_dbg(isif_cfg.dev, "Invalid interface type\n"); + return -EINVAL; + } + + return 0; +} + +/* This function will configure ISIF for YCbCr parameters. */ +static int isif_config_ycbcr(void) +{ + struct isif_ycbcr_config *params = &isif_cfg.ycbcr; + struct vpss_pg_frame_size frame_size; + u32 modeset = 0, ccdcfg = 0; + struct vpss_sync_pol sync; + + dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr..."); + + /* configure pixel format or input mode */ + modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) | + (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | + (params->fid_pol << ISIF_FID_POL_SHIFT) | + (params->hd_pol << ISIF_HD_POL_SHIFT) | + (params->vd_pol << ISIF_VD_POL_SHIFT); + + /* pack the data to 8-bit ISIFCFG */ + switch (isif_cfg.if_type) { + case VPFE_BT656: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT); + regw(3, REC656IF); + ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR; + break; + case VPFE_BT656_10BIT: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + /* setup BT.656, embedded sync */ + regw(3, REC656IF); + /* enable 10 bit mode in ccdcfg */ + ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR | + ISIF_BW656_ENABLE; + break; + case VPFE_BT1120: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + regw(3, REC656IF); + break; + + case VPFE_YCBCR_SYNC_8: + ccdcfg |= ISIF_DATA_PACK8; + ccdcfg |= ISIF_YCINSWP_YCBCR; + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + break; + case VPFE_YCBCR_SYNC_16: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + break; + default: + /* should never come here */ + dev_dbg(isif_cfg.dev, "Invalid interface type\n"); + return -EINVAL; + } + + regw(modeset, MODESET); + + /* Set up pix order */ + ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT; + + regw(ccdcfg, CCDCFG); + + /* configure video window */ + if ((isif_cfg.if_type == VPFE_BT1120) || + (isif_cfg.if_type == VPFE_YCBCR_SYNC_16)) + isif_setwin(¶ms->win, params->frm_fmt, 1); + else + isif_setwin(¶ms->win, params->frm_fmt, 2); + + /* + * configure the horizontal line offset + * this is done by rounding up width to a multiple of 16 pixels + * and multiply by two to account for y:cb:cr 4:2:2 data + */ + regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE); + + /* configure the memory line offset */ + if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) && + (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)) + /* two fields are interleaved in memory */ + regw(0x00000249, SDOFST); + + /* Setup test pattern if enabled */ + if (isif_cfg.bayer.config_params.test_pat_gen) { + sync.ccdpg_hdpol = params->hd_pol; + sync.ccdpg_vdpol = params->vd_pol; + dm365_vpss_set_sync_pol(sync); + dm365_vpss_set_pg_frame_size(frame_size); + } + return 0; +} + +static int isif_configure(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_config_raw(); + return isif_config_ycbcr(); +} + +static int isif_close(struct device *device) +{ + /* copy defaults to module params */ + isif_cfg.bayer.config_params = isif_config_defaults; + return 0; +} + +static struct ccdc_hw_device isif_hw_dev = { + .name = "ISIF", + .owner = THIS_MODULE, + .hw_ops = { + .open = isif_open, + .close = isif_close, + .enable = isif_enable, + .enable_out_to_sdram = isif_enable_output_to_sdram, + .set_hw_if_params = isif_set_hw_if_params, + .configure = isif_configure, + .set_buftype = isif_set_buftype, + .get_buftype = isif_get_buftype, + .enum_pix = isif_enum_pix, + .set_pixel_format = isif_set_pixel_format, + .get_pixel_format = isif_get_pixel_format, + .set_frame_format = isif_set_frame_format, + .get_frame_format = isif_get_frame_format, + .set_image_window = isif_set_image_window, + .get_image_window = isif_get_image_window, + .get_line_length = isif_get_line_length, + .setfbaddr = isif_setfbaddr, + .getfid = isif_getfid, + }, +}; + +static int isif_probe(struct platform_device *pdev) +{ + void (*setup_pinmux)(void); + struct resource *res; + void *__iomem addr; + int status = 0, i; + + /* Platform data holds setup_pinmux function ptr */ + if (!pdev->dev.platform_data) + return -ENODEV; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&isif_hw_dev); + if (status < 0) + return status; + + setup_pinmux = pdev->dev.platform_data; + /* + * setup Mux configuration for ccdc which may be different for + * different SoCs using this CCDC + */ + setup_pinmux(); + + i = 0; + /* Get the ISIF base address, linearization table0 and table1 addr. */ + while (i < 3) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (!res) { + status = -ENODEV; + goto fail_nobase_res; + } + res = request_mem_region(res->start, resource_size(res), + res->name); + if (!res) { + status = -EBUSY; + goto fail_nobase_res; + } + addr = ioremap_nocache(res->start, resource_size(res)); + if (!addr) { + status = -ENOMEM; + goto fail_base_iomap; + } + switch (i) { + case 0: + /* ISIF base address */ + isif_cfg.base_addr = addr; + break; + case 1: + /* ISIF linear tbl0 address */ + isif_cfg.linear_tbl0_addr = addr; + break; + default: + /* ISIF linear tbl0 address */ + isif_cfg.linear_tbl1_addr = addr; + break; + } + i++; + } + isif_cfg.dev = &pdev->dev; + + printk(KERN_NOTICE "%s is registered with vpfe.\n", + isif_hw_dev.name); + return 0; +fail_base_iomap: + release_mem_region(res->start, resource_size(res)); + i--; +fail_nobase_res: + if (isif_cfg.base_addr) + iounmap(isif_cfg.base_addr); + if (isif_cfg.linear_tbl0_addr) + iounmap(isif_cfg.linear_tbl0_addr); + + while (i >= 0) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + release_mem_region(res->start, resource_size(res)); + i--; + } + vpfe_unregister_ccdc_device(&isif_hw_dev); + return status; +} + +static int isif_remove(struct platform_device *pdev) +{ + struct resource *res; + int i = 0; + + iounmap(isif_cfg.base_addr); + iounmap(isif_cfg.linear_tbl0_addr); + iounmap(isif_cfg.linear_tbl1_addr); + while (i < 3) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (res) + release_mem_region(res->start, resource_size(res)); + i++; + } + vpfe_unregister_ccdc_device(&isif_hw_dev); + return 0; +} + +static struct platform_driver isif_driver = { + .driver = { + .name = "isif", + .owner = THIS_MODULE, + }, + .remove = isif_remove, + .probe = isif_probe, +}; + +module_platform_driver(isif_driver); + +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/davinci/isif_regs.h b/drivers/media/platform/davinci/isif_regs.h new file mode 100644 index 00000000..3993aece --- /dev/null +++ b/drivers/media/platform/davinci/isif_regs.h @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ISIF_REGS_H +#define _ISIF_REGS_H + +/* ISIF registers relative offsets */ +#define SYNCEN 0x00 +#define MODESET 0x04 +#define HDW 0x08 +#define VDW 0x0c +#define PPLN 0x10 +#define LPFR 0x14 +#define SPH 0x18 +#define LNH 0x1c +#define SLV0 0x20 +#define SLV1 0x24 +#define LNV 0x28 +#define CULH 0x2c +#define CULV 0x30 +#define HSIZE 0x34 +#define SDOFST 0x38 +#define CADU 0x3c +#define CADL 0x40 +#define LINCFG0 0x44 +#define LINCFG1 0x48 +#define CCOLP 0x4c +#define CRGAIN 0x50 +#define CGRGAIN 0x54 +#define CGBGAIN 0x58 +#define CBGAIN 0x5c +#define COFSTA 0x60 +#define FLSHCFG0 0x64 +#define FLSHCFG1 0x68 +#define FLSHCFG2 0x6c +#define VDINT0 0x70 +#define VDINT1 0x74 +#define VDINT2 0x78 +#define MISC 0x7c +#define CGAMMAWD 0x80 +#define REC656IF 0x84 +#define CCDCFG 0x88 +/***************************************************** +* Defect Correction registers +*****************************************************/ +#define DFCCTL 0x8c +#define VDFSATLV 0x90 +#define DFCMEMCTL 0x94 +#define DFCMEM0 0x98 +#define DFCMEM1 0x9c +#define DFCMEM2 0xa0 +#define DFCMEM3 0xa4 +#define DFCMEM4 0xa8 +/**************************************************** +* Black Clamp registers +****************************************************/ +#define CLAMPCFG 0xac +#define CLDCOFST 0xb0 +#define CLSV 0xb4 +#define CLHWIN0 0xb8 +#define CLHWIN1 0xbc +#define CLHWIN2 0xc0 +#define CLVRV 0xc4 +#define CLVWIN0 0xc8 +#define CLVWIN1 0xcc +#define CLVWIN2 0xd0 +#define CLVWIN3 0xd4 +/**************************************************** +* Lense Shading Correction +****************************************************/ +#define DATAHOFST 0xd8 +#define DATAVOFST 0xdc +#define LSCHVAL 0xe0 +#define LSCVVAL 0xe4 +#define TWODLSCCFG 0xe8 +#define TWODLSCOFST 0xec +#define TWODLSCINI 0xf0 +#define TWODLSCGRBU 0xf4 +#define TWODLSCGRBL 0xf8 +#define TWODLSCGROF 0xfc +#define TWODLSCORBU 0x100 +#define TWODLSCORBL 0x104 +#define TWODLSCOROF 0x108 +#define TWODLSCIRQEN 0x10c +#define TWODLSCIRQST 0x110 +/**************************************************** +* Data formatter +****************************************************/ +#define FMTCFG 0x114 +#define FMTPLEN 0x118 +#define FMTSPH 0x11c +#define FMTLNH 0x120 +#define FMTSLV 0x124 +#define FMTLNV 0x128 +#define FMTRLEN 0x12c +#define FMTHCNT 0x130 +#define FMTAPTR_BASE 0x134 +/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */ +#define FMTAPTR(i) (FMTAPTR_BASE + (i * 4)) +#define FMTPGMVF0 0x174 +#define FMTPGMVF1 0x178 +#define FMTPGMAPU0 0x17c +#define FMTPGMAPU1 0x180 +#define FMTPGMAPS0 0x184 +#define FMTPGMAPS1 0x188 +#define FMTPGMAPS2 0x18c +#define FMTPGMAPS3 0x190 +#define FMTPGMAPS4 0x194 +#define FMTPGMAPS5 0x198 +#define FMTPGMAPS6 0x19c +#define FMTPGMAPS7 0x1a0 +/************************************************ +* Color Space Converter +************************************************/ +#define CSCCTL 0x1a4 +#define CSCM0 0x1a8 +#define CSCM1 0x1ac +#define CSCM2 0x1b0 +#define CSCM3 0x1b4 +#define CSCM4 0x1b8 +#define CSCM5 0x1bc +#define CSCM6 0x1c0 +#define CSCM7 0x1c4 +#define OBWIN0 0x1c8 +#define OBWIN1 0x1cc +#define OBWIN2 0x1d0 +#define OBWIN3 0x1d4 +#define OBVAL0 0x1d8 +#define OBVAL1 0x1dc +#define OBVAL2 0x1e0 +#define OBVAL3 0x1e4 +#define OBVAL4 0x1e8 +#define OBVAL5 0x1ec +#define OBVAL6 0x1f0 +#define OBVAL7 0x1f4 +#define CLKCTL 0x1f8 + +/* Masks & Shifts below */ +#define START_PX_HOR_MASK 0x7FFF +#define NUM_PX_HOR_MASK 0x7FFF +#define START_VER_ONE_MASK 0x7FFF +#define START_VER_TWO_MASK 0x7FFF +#define NUM_LINES_VER 0x7FFF + +/* gain - offset masks */ +#define GAIN_INTEGER_SHIFT 9 +#define OFFSET_MASK 0xFFF +#define GAIN_SDRAM_EN_SHIFT 12 +#define GAIN_IPIPE_EN_SHIFT 13 +#define GAIN_H3A_EN_SHIFT 14 +#define OFST_SDRAM_EN_SHIFT 8 +#define OFST_IPIPE_EN_SHIFT 9 +#define OFST_H3A_EN_SHIFT 10 +#define GAIN_OFFSET_EN_MASK 0x7700 + +/* Culling */ +#define CULL_PAT_EVEN_LINE_SHIFT 8 + +/* CCDCFG register */ +#define ISIF_YCINSWP_RAW (0x00 << 4) +#define ISIF_YCINSWP_YCBCR (0x01 << 4) +#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC (0x00 << 6) +#define ISIF_CCDCFG_WENLOG_AND (0x00 << 8) +#define ISIF_CCDCFG_TRGSEL_WEN (0x00 << 9) +#define ISIF_CCDCFG_EXTRG_DISABLE (0x00 << 10) +#define ISIF_LATCH_ON_VSYNC_DISABLE (0x01 << 15) +#define ISIF_LATCH_ON_VSYNC_ENABLE (0x00 << 15) +#define ISIF_DATA_PACK_MASK 3 +#define ISIF_DATA_PACK16 0 +#define ISIF_DATA_PACK12 1 +#define ISIF_DATA_PACK8 2 +#define ISIF_PIX_ORDER_SHIFT 11 +#define ISIF_BW656_ENABLE (0x01 << 5) + +/* MODESET registers */ +#define ISIF_VDHDOUT_INPUT (0x00 << 0) +#define ISIF_INPUT_SHIFT 12 +#define ISIF_RAW_INPUT_MODE 0 +#define ISIF_FID_POL_SHIFT 4 +#define ISIF_HD_POL_SHIFT 3 +#define ISIF_VD_POL_SHIFT 2 +#define ISIF_DATAPOL_NORMAL 0 +#define ISIF_DATAPOL_SHIFT 6 +#define ISIF_EXWEN_DISABLE 0 +#define ISIF_EXWEN_SHIFT 5 +#define ISIF_FRM_FMT_SHIFT 7 +#define ISIF_DATASFT_SHIFT 8 +#define ISIF_LPF_SHIFT 14 +#define ISIF_LPF_MASK 1 + +/* GAMMAWD registers */ +#define ISIF_ALAW_GAMMA_WD_MASK 0xF +#define ISIF_ALAW_GAMMA_WD_SHIFT 1 +#define ISIF_ALAW_ENABLE 1 +#define ISIF_GAMMAWD_CFA_SHIFT 5 + +/* HSIZE registers */ +#define ISIF_HSIZE_FLIP_MASK 1 +#define ISIF_HSIZE_FLIP_SHIFT 12 + +/* MISC registers */ +#define ISIF_DPCM_EN_SHIFT 12 +#define ISIF_DPCM_PREDICTOR_SHIFT 13 + +/* Black clamp related */ +#define ISIF_BC_MODE_COLOR_SHIFT 4 +#define ISIF_HORZ_BC_MODE_SHIFT 1 +#define ISIF_HORZ_BC_WIN_SEL_SHIFT 5 +#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT 6 +#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT 8 +#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT 12 +#define ISIF_VERT_BC_RST_VAL_SEL_SHIFT 4 +#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT 8 + +/* VDFC registers */ +#define ISIF_VDFC_EN_SHIFT 4 +#define ISIF_VDFC_CORR_MOD_SHIFT 5 +#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT 7 +#define ISIF_VDFC_LEVEL_SHFT_SHIFT 8 +#define ISIF_VDFC_POS_MASK 0x1FFF +#define ISIF_DFCMEMCTL_DFCMARST_SHIFT 2 + +/* CSC registers */ +#define ISIF_CSC_COEF_INTEG_MASK 7 +#define ISIF_CSC_COEF_DECIMAL_MASK 0x1f +#define ISIF_CSC_COEF_INTEG_SHIFT 5 +#define ISIF_CSCM_MSB_SHIFT 8 +#define ISIF_DF_CSC_SPH_MASK 0x1FFF +#define ISIF_DF_CSC_LNH_MASK 0x1FFF +#define ISIF_DF_CSC_SLV_MASK 0x1FFF +#define ISIF_DF_CSC_LNV_MASK 0x1FFF +#define ISIF_DF_NUMLINES 0x7FFF +#define ISIF_DF_NUMPIX 0x1FFF + +/* Offsets for LSC/DFC/Gain */ +#define ISIF_DATA_H_OFFSET_MASK 0x1FFF +#define ISIF_DATA_V_OFFSET_MASK 0x1FFF + +/* Linearization */ +#define ISIF_LIN_CORRSFT_SHIFT 4 +#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT 10 + + +/* Pattern registers */ +#define ISIF_PG_EN (1 << 3) +#define ISIF_SEL_PG_SRC (3 << 4) +#define ISIF_PG_VD_POL_SHIFT 0 +#define ISIF_PG_HD_POL_SHIFT 1 + +/*random other junk*/ +#define ISIF_SYNCEN_VDHDEN_MASK (1 << 0) +#define ISIF_SYNCEN_WEN_MASK (1 << 1) +#define ISIF_SYNCEN_WEN_SHIFT 1 + +#endif diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c new file mode 100644 index 00000000..33b9660b --- /dev/null +++ b/drivers/media/platform/davinci/vpbe.c @@ -0,0 +1,872 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define VPBE_DEFAULT_OUTPUT "Composite" +#define VPBE_DEFAULT_MODE "ntsc" + +static char *def_output = VPBE_DEFAULT_OUTPUT; +static char *def_mode = VPBE_DEFAULT_MODE; +static int debug; + +module_param(def_output, charp, S_IRUGO); +module_param(def_mode, charp, S_IRUGO); +module_param(debug, int, 0644); + +MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)"); +MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc"); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +MODULE_DESCRIPTION("TI DMXXX VPBE Display controller"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); + +/** + * vpbe_current_encoder_info - Get config info for current encoder + * @vpbe_dev - vpbe device ptr + * + * Return ptr to current encoder config info + */ +static struct encoder_config_info* +vpbe_current_encoder_info(struct vpbe_device *vpbe_dev) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int index = vpbe_dev->current_sd_index; + + return ((index == 0) ? &cfg->venc : + &cfg->ext_encoders[index-1]); +} + +/** + * vpbe_find_encoder_sd_index - Given a name find encoder sd index + * + * @vpbe_config - ptr to vpbe cfg + * @output_index - index used by application + * + * Return sd index of the encoder + */ +static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg, + int index) +{ + char *encoder_name = cfg->outputs[index].subdev_name; + int i; + + /* Venc is always first */ + if (!strcmp(encoder_name, cfg->venc.module_name)) + return 0; + + for (i = 0; i < cfg->num_ext_encoders; i++) { + if (!strcmp(encoder_name, + cfg->ext_encoders[i].module_name)) + return i+1; + } + + return -EINVAL; +} + +/** + * vpbe_g_cropcap - Get crop capabilities of the display + * @vpbe_dev - vpbe device ptr + * @cropcap - cropcap is a ptr to struct v4l2_cropcap + * + * Update the crop capabilities in crop cap for current + * mode + */ +static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev, + struct v4l2_cropcap *cropcap) +{ + if (NULL == cropcap) + return -EINVAL; + cropcap->bounds.left = 0; + cropcap->bounds.top = 0; + cropcap->bounds.width = vpbe_dev->current_timings.xres; + cropcap->bounds.height = vpbe_dev->current_timings.yres; + cropcap->defrect = cropcap->bounds; + + return 0; +} + +/** + * vpbe_enum_outputs - enumerate outputs + * @vpbe_dev - vpbe device ptr + * @output - ptr to v4l2_output structure + * + * Enumerates the outputs available at the vpbe display + * returns the status, -EINVAL if end of output list + */ +static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev, + struct v4l2_output *output) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int temp_index = output->index; + + if (temp_index >= cfg->num_outputs) + return -EINVAL; + + *output = cfg->outputs[temp_index].output; + output->index = temp_index; + + return 0; +} + +static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode, + int output_index) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = output_index; + int i; + + if (NULL == mode) + return -EINVAL; + + for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if (!strcmp(mode, var.name)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info *mode_info) +{ + if (NULL == mode_info) + return -EINVAL; + + *mode_info = vpbe_dev->current_timings; + + return 0; +} + +/* Get std by std id */ +static int vpbe_get_std_info(struct vpbe_device *vpbe_dev, + v4l2_std_id std_id) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if ((var.timings_type & VPBE_ENC_STD) && + (var.std_id & std_id)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev, + char *std_name) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if (!strcmp(var.name, std_name)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +/** + * vpbe_set_output - Set output + * @vpbe_dev - vpbe device ptr + * @index - index of output + * + * Set vpbe output to the output specified by the index + */ +static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) +{ + struct encoder_config_info *curr_enc_info = + vpbe_current_encoder_info(vpbe_dev); + struct vpbe_config *cfg = vpbe_dev->cfg; + struct venc_platform_data *venc_device = vpbe_dev->venc_device; + enum v4l2_mbus_pixelcode if_params; + int enc_out_index; + int sd_index; + int ret = 0; + + if (index >= cfg->num_outputs) + return -EINVAL; + + mutex_lock(&vpbe_dev->lock); + + sd_index = vpbe_dev->current_sd_index; + enc_out_index = cfg->outputs[index].output.index; + /* + * Currently we switch the encoder based on output selected + * by the application. If media controller is implemented later + * there is will be an API added to setup_link between venc + * and external encoder. So in that case below comparison always + * match and encoder will not be switched. But if application + * chose not to use media controller, then this provides current + * way of switching encoder at the venc output. + */ + if (strcmp(curr_enc_info->module_name, + cfg->outputs[index].subdev_name)) { + /* Need to switch the encoder at the output */ + sd_index = vpbe_find_encoder_sd_index(cfg, index); + if (sd_index < 0) { + ret = -EINVAL; + goto out; + } + + if_params = cfg->outputs[index].if_params; + venc_device->setup_if_config(if_params); + if (ret) + goto out; + } + + /* Set output at the encoder */ + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_routing, 0, enc_out_index, 0); + if (ret) + goto out; + + /* + * It is assumed that venc or extenal encoder will set a default + * mode in the sub device. For external encoder or LCD pannel output, + * we also need to set up the lcd port for the required mode. So setup + * the lcd port for the default mode that is configured in the board + * arch/arm/mach-davinci/board-dm355-evm.setup file for the external + * encoder. + */ + ret = vpbe_get_mode_info(vpbe_dev, + cfg->outputs[index].default_mode, index); + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + vpbe_dev->current_sd_index = sd_index; + vpbe_dev->current_out_index = index; + } +out: + mutex_unlock(&vpbe_dev->lock); + return ret; +} + +static int vpbe_set_default_output(struct vpbe_device *vpbe_dev) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int ret = 0; + int i; + + for (i = 0; i < cfg->num_outputs; i++) { + if (!strcmp(def_output, + cfg->outputs[i].output.name)) { + ret = vpbe_set_output(vpbe_dev, i); + if (!ret) + vpbe_dev->current_out_index = i; + return ret; + } + } + return ret; +} + +/** + * vpbe_get_output - Get output + * @vpbe_dev - vpbe device ptr + * + * return current vpbe output to the the index + */ +static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev) +{ + return vpbe_dev->current_out_index; +} + +/** + * vpbe_s_dv_timings - Set the given preset timings in the encoder + * + * Sets the timings if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_s_dv_timings(struct vpbe_device *vpbe_dev, + struct v4l2_dv_timings *dv_timings) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + struct vpbe_output *output = &cfg->outputs[out_index]; + int sd_index = vpbe_dev->current_sd_index; + int ret, i; + + + if (!(cfg->outputs[out_index].output.capabilities & + V4L2_OUT_CAP_DV_TIMINGS)) + return -EINVAL; + + for (i = 0; i < output->num_modes; i++) { + if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS && + !memcmp(&output->modes[i].dv_timings, + dv_timings, sizeof(*dv_timings))) + break; + } + if (i >= output->num_modes) + return -EINVAL; + vpbe_dev->current_timings = output->modes[i]; + mutex_lock(&vpbe_dev->lock); + + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_dv_timings, dv_timings); + if (!ret && (vpbe_dev->amp != NULL)) { + /* Call amplifier subdevice */ + ret = v4l2_subdev_call(vpbe_dev->amp, video, + s_dv_timings, dv_timings); + } + /* set the lcd controller output for the given mode */ + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + } + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +/** + * vpbe_g_dv_timings - Get the timings in the current encoder + * + * Get the timings in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_g_dv_timings(struct vpbe_device *vpbe_dev, + struct v4l2_dv_timings *dv_timings) +{ + if (vpbe_dev->current_timings.timings_type & + VPBE_ENC_DV_TIMINGS) { + *dv_timings = vpbe_dev->current_timings.dv_timings; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_enum_dv_timings - Enumerate the dv timings in the current encoder + * + * Get the timings in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_enum_dv_timings(struct vpbe_device *vpbe_dev, + struct v4l2_enum_dv_timings *timings) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + struct vpbe_output *output = &cfg->outputs[out_index]; + int j = 0; + int i; + + if (!(output->output.capabilities & V4L2_OUT_CAP_DV_TIMINGS)) + return -EINVAL; + + for (i = 0; i < output->num_modes; i++) { + if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS) { + if (j == timings->index) + break; + j++; + } + } + + if (i == output->num_modes) + return -EINVAL; + timings->timings = output->modes[i].dv_timings; + return 0; +} + +/** + * vpbe_s_std - Set the given standard in the encoder + * + * Sets the standard if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id std_id) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + int sd_index = vpbe_dev->current_sd_index; + int ret; + + if (!(cfg->outputs[out_index].output.capabilities & + V4L2_OUT_CAP_STD)) + return -EINVAL; + + ret = vpbe_get_std_info(vpbe_dev, std_id); + if (ret) + return ret; + + mutex_lock(&vpbe_dev->lock); + + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_std_output, std_id); + /* set the lcd controller output for the given mode */ + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + } + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +/** + * vpbe_g_std - Get the standard in the current encoder + * + * Get the standard in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id) +{ + struct vpbe_enc_mode_info *cur_timings = &vpbe_dev->current_timings; + + if (cur_timings->timings_type & VPBE_ENC_STD) { + *std_id = cur_timings->std_id; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_set_mode - Set mode in the current encoder using mode info + * + * Use the mode string to decide what timings to set in the encoder + * This is typically useful when fbset command is used to change the current + * timings by specifying a string to indicate the timings. + */ +static int vpbe_set_mode(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info *mode_info) +{ + struct vpbe_enc_mode_info *preset_mode = NULL; + struct vpbe_config *cfg = vpbe_dev->cfg; + struct v4l2_dv_timings dv_timings; + struct osd_state *osd_device; + int out_index = vpbe_dev->current_out_index; + int ret = 0; + int i; + + if ((NULL == mode_info) || (NULL == mode_info->name)) + return -EINVAL; + + for (i = 0; i < cfg->outputs[out_index].num_modes; i++) { + if (!strcmp(mode_info->name, + cfg->outputs[out_index].modes[i].name)) { + preset_mode = &cfg->outputs[out_index].modes[i]; + /* + * it may be one of the 3 timings type. Check and + * invoke right API + */ + if (preset_mode->timings_type & VPBE_ENC_STD) + return vpbe_s_std(vpbe_dev, + preset_mode->std_id); + if (preset_mode->timings_type & + VPBE_ENC_DV_TIMINGS) { + dv_timings = + preset_mode->dv_timings; + return vpbe_s_dv_timings(vpbe_dev, &dv_timings); + } + } + } + + /* Only custom timing should reach here */ + if (preset_mode == NULL) + return -EINVAL; + + mutex_lock(&vpbe_dev->lock); + + osd_device = vpbe_dev->osd_device; + vpbe_dev->current_timings = *preset_mode; + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev) +{ + int ret; + + ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode); + if (ret) + return ret; + + /* set the default mode in the encoder */ + return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings); +} + +static int platform_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vpbe_device *vpbe_dev = data; + + if (strstr(pdev->name, "vpbe-osd") != NULL) + vpbe_dev->osd_device = platform_get_drvdata(pdev); + if (strstr(pdev->name, "vpbe-venc") != NULL) + vpbe_dev->venc_device = dev_get_platdata(&pdev->dev); + + return 0; +} + +/** + * vpbe_initialize() - Initialize the vpbe display controller + * @vpbe_dev - vpbe device ptr + * + * Master frame buffer device drivers calls this to initialize vpbe + * display controller. This will then registers v4l2 device and the sub + * devices and sets a current encoder sub device for display. v4l2 display + * device driver is the master and frame buffer display device driver is + * the slave. Frame buffer display driver checks the initialized during + * probe and exit if not initialized. Returns status. + */ +static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) +{ + struct encoder_config_info *enc_info; + struct amp_config_info *amp_info; + struct v4l2_subdev **enc_subdev; + struct osd_state *osd_device; + struct i2c_adapter *i2c_adap; + int num_encoders; + int ret = 0; + int err; + int i; + + /* + * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer + * from the platform device by iteration of platform drivers and + * matching with device name + */ + if (NULL == vpbe_dev || NULL == dev) { + printk(KERN_ERR "Null device pointers.\n"); + return -ENODEV; + } + + if (vpbe_dev->initialized) + return 0; + + mutex_lock(&vpbe_dev->lock); + + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) { + /* We have dac clock available for platform */ + vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac"); + if (IS_ERR(vpbe_dev->dac_clk)) { + ret = PTR_ERR(vpbe_dev->dac_clk); + goto fail_mutex_unlock; + } + if (clk_prepare_enable(vpbe_dev->dac_clk)) { + ret = -ENODEV; + goto fail_mutex_unlock; + } + } + + /* first enable vpss clocks */ + vpss_enable_clock(VPSS_VPBE_CLOCK, 1); + + /* First register a v4l2 device */ + ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev); + if (ret) { + v4l2_err(dev->driver, + "Unable to register v4l2 device.\n"); + goto fail_clk_put; + } + v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n"); + + err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev, + platform_device_get); + if (err < 0) { + ret = err; + goto fail_dev_unregister; + } + + vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev, + vpbe_dev->cfg->venc.module_name); + /* register venc sub device */ + if (vpbe_dev->venc == NULL) { + v4l2_err(&vpbe_dev->v4l2_dev, + "vpbe unable to init venc sub device\n"); + ret = -ENODEV; + goto fail_dev_unregister; + } + /* initialize osd device */ + osd_device = vpbe_dev->osd_device; + + if (NULL != osd_device->ops.initialize) { + err = osd_device->ops.initialize(osd_device); + if (err) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to initialize the OSD device"); + err = -ENOMEM; + goto fail_dev_unregister; + } + } + + /* + * Register any external encoders that are configured. At index 0 we + * store venc sd index. + */ + num_encoders = vpbe_dev->cfg->num_ext_encoders + 1; + vpbe_dev->encoders = kmalloc( + sizeof(struct v4l2_subdev *)*num_encoders, + GFP_KERNEL); + if (NULL == vpbe_dev->encoders) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to allocate memory for encoders sub devices"); + ret = -ENOMEM; + goto fail_dev_unregister; + } + + i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id); + for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) { + if (i == 0) { + /* venc is at index 0 */ + enc_subdev = &vpbe_dev->encoders[i]; + *enc_subdev = vpbe_dev->venc; + continue; + } + enc_info = &vpbe_dev->cfg->ext_encoders[i]; + if (enc_info->is_i2c) { + enc_subdev = &vpbe_dev->encoders[i]; + *enc_subdev = v4l2_i2c_new_subdev_board( + &vpbe_dev->v4l2_dev, i2c_adap, + &enc_info->board_info, NULL); + if (*enc_subdev) + v4l2_info(&vpbe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + enc_info->module_name); + else { + v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s" + " failed to register", + enc_info->module_name); + ret = -ENODEV; + goto fail_kfree_encoders; + } + } else + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders" + " currently not supported"); + } + /* Add amplifier subdevice for dm365 */ + if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) && + vpbe_dev->cfg->amp != NULL) { + amp_info = vpbe_dev->cfg->amp; + if (amp_info->is_i2c) { + vpbe_dev->amp = v4l2_i2c_new_subdev_board( + &vpbe_dev->v4l2_dev, i2c_adap, + &_info->board_info, NULL); + if (!vpbe_dev->amp) { + v4l2_err(&vpbe_dev->v4l2_dev, + "amplifier %s failed to register", + amp_info->module_name); + ret = -ENODEV; + goto fail_kfree_encoders; + } + v4l2_info(&vpbe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + amp_info->module_name); + } else { + vpbe_dev->amp = NULL; + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers" + " currently not supported"); + } + } else { + vpbe_dev->amp = NULL; + } + + /* set the current encoder and output to that of venc by default */ + vpbe_dev->current_sd_index = 0; + vpbe_dev->current_out_index = 0; + + mutex_unlock(&vpbe_dev->lock); + + printk(KERN_NOTICE "Setting default output to %s\n", def_output); + ret = vpbe_set_default_output(vpbe_dev); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s", + def_output); + return ret; + } + + printk(KERN_NOTICE "Setting default mode to %s\n", def_mode); + ret = vpbe_set_default_mode(vpbe_dev); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s", + def_mode); + return ret; + } + vpbe_dev->initialized = 1; + /* TBD handling of bootargs for default output and mode */ + return 0; + +fail_kfree_encoders: + kfree(vpbe_dev->encoders); +fail_dev_unregister: + v4l2_device_unregister(&vpbe_dev->v4l2_dev); +fail_clk_put: + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) { + clk_disable_unprepare(vpbe_dev->dac_clk); + clk_put(vpbe_dev->dac_clk); + } +fail_mutex_unlock: + mutex_unlock(&vpbe_dev->lock); + return ret; +} + +/** + * vpbe_deinitialize() - de-initialize the vpbe display controller + * @dev - Master and slave device ptr + * + * vpbe_master and slave frame buffer devices calls this to de-initialize + * the display controller. It is called when master and slave device + * driver modules are removed and no longer requires the display controller. + */ +static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev) +{ + v4l2_device_unregister(&vpbe_dev->v4l2_dev); + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) { + clk_disable_unprepare(vpbe_dev->dac_clk); + clk_put(vpbe_dev->dac_clk); + } + + kfree(vpbe_dev->amp); + kfree(vpbe_dev->encoders); + vpbe_dev->initialized = 0; + /* disable vpss clocks */ + vpss_enable_clock(VPSS_VPBE_CLOCK, 0); +} + +static struct vpbe_device_ops vpbe_dev_ops = { + .g_cropcap = vpbe_g_cropcap, + .enum_outputs = vpbe_enum_outputs, + .set_output = vpbe_set_output, + .get_output = vpbe_get_output, + .s_dv_timings = vpbe_s_dv_timings, + .g_dv_timings = vpbe_g_dv_timings, + .enum_dv_timings = vpbe_enum_dv_timings, + .s_std = vpbe_s_std, + .g_std = vpbe_g_std, + .initialize = vpbe_initialize, + .deinitialize = vpbe_deinitialize, + .get_mode_info = vpbe_get_current_mode_info, + .set_mode = vpbe_set_mode, +}; + +static int vpbe_probe(struct platform_device *pdev) +{ + struct vpbe_device *vpbe_dev; + struct vpbe_config *cfg; + int ret = -EINVAL; + + if (pdev->dev.platform_data == NULL) { + v4l2_err(pdev->dev.driver, "No platform data\n"); + return -ENODEV; + } + cfg = pdev->dev.platform_data; + + if (!cfg->module_name[0] || + !cfg->osd.module_name[0] || + !cfg->venc.module_name[0]) { + v4l2_err(pdev->dev.driver, "vpbe display module names not" + " defined\n"); + return ret; + } + + vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL); + if (vpbe_dev == NULL) { + v4l2_err(pdev->dev.driver, "Unable to allocate memory" + " for vpbe_device\n"); + return -ENOMEM; + } + vpbe_dev->cfg = cfg; + vpbe_dev->ops = vpbe_dev_ops; + vpbe_dev->pdev = &pdev->dev; + + if (cfg->outputs->num_modes > 0) + vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0]; + else { + kfree(vpbe_dev); + return -ENODEV; + } + + /* set the driver data in platform device */ + platform_set_drvdata(pdev, vpbe_dev); + mutex_init(&vpbe_dev->lock); + + return 0; +} + +static int vpbe_remove(struct platform_device *device) +{ + struct vpbe_device *vpbe_dev = platform_get_drvdata(device); + + kfree(vpbe_dev); + + return 0; +} + +static struct platform_driver vpbe_driver = { + .driver = { + .name = "vpbe_controller", + .owner = THIS_MODULE, + }, + .probe = vpbe_probe, + .remove = vpbe_remove, +}; + +module_platform_driver(vpbe_driver); diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c new file mode 100644 index 00000000..d0b375cf --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_display.c @@ -0,0 +1,1904 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "vpbe_venc_regs.h" + +#define VPBE_DISPLAY_DRIVER "vpbe-v4l2" + +static int debug; + +#define VPBE_DEFAULT_NUM_BUFS 3 + +module_param(debug, int, 0644); + +static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev, + struct vpbe_layer *layer); + +static int venc_is_second_field(struct vpbe_display *disp_dev) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int ret; + int val; + + ret = v4l2_subdev_call(vpbe_dev->venc, + core, + ioctl, + VENC_GET_FLD, + &val); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in getting Field ID 0\n"); + } + return val; +} + +static void vpbe_isr_even_field(struct vpbe_display *disp_obj, + struct vpbe_layer *layer) +{ + struct timespec timevalue; + + if (layer->cur_frm == layer->next_frm) + return; + ktime_get_ts(&timevalue); + layer->cur_frm->vb.v4l2_buf.timestamp.tv_sec = + timevalue.tv_sec; + layer->cur_frm->vb.v4l2_buf.timestamp.tv_usec = + timevalue.tv_nsec / NSEC_PER_USEC; + vb2_buffer_done(&layer->cur_frm->vb, VB2_BUF_STATE_DONE); + /* Make cur_frm pointing to next_frm */ + layer->cur_frm = layer->next_frm; +} + +static void vpbe_isr_odd_field(struct vpbe_display *disp_obj, + struct vpbe_layer *layer) +{ + struct osd_state *osd_device = disp_obj->osd_device; + unsigned long addr; + + spin_lock(&disp_obj->dma_queue_lock); + if (list_empty(&layer->dma_queue) || + (layer->cur_frm != layer->next_frm)) { + spin_unlock(&disp_obj->dma_queue_lock); + return; + } + /* + * one field is displayed configure + * the next frame if it is available + * otherwise hold on current frame + * Get next from the buffer queue + */ + layer->next_frm = list_entry(layer->dma_queue.next, + struct vpbe_disp_buffer, list); + /* Remove that from the buffer queue */ + list_del(&layer->next_frm->list); + spin_unlock(&disp_obj->dma_queue_lock); + /* Mark state of the frame to active */ + layer->next_frm->vb.state = VB2_BUF_STATE_ACTIVE; + addr = vb2_dma_contig_plane_dma_addr(&layer->next_frm->vb, 0); + osd_device->ops.start_layer(osd_device, + layer->layer_info.id, + addr, + disp_obj->cbcr_ofst); +} + +/* interrupt service routine */ +static irqreturn_t venc_isr(int irq, void *arg) +{ + struct vpbe_display *disp_dev = (struct vpbe_display *)arg; + struct vpbe_layer *layer; + static unsigned last_event; + unsigned event = 0; + int fid; + int i; + + if ((NULL == arg) || (NULL == disp_dev->dev[0])) + return IRQ_HANDLED; + + if (venc_is_second_field(disp_dev)) + event |= VENC_SECOND_FIELD; + else + event |= VENC_FIRST_FIELD; + + if (event == (last_event & ~VENC_END_OF_FRAME)) { + /* + * If the display is non-interlaced, then we need to flag the + * end-of-frame event at every interrupt regardless of the + * value of the FIDST bit. We can conclude that the display is + * non-interlaced if the value of the FIDST bit is unchanged + * from the previous interrupt. + */ + event |= VENC_END_OF_FRAME; + } else if (event == VENC_SECOND_FIELD) { + /* end-of-frame for interlaced display */ + event |= VENC_END_OF_FRAME; + } + last_event = event; + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + layer = disp_dev->dev[i]; + /* If streaming is started in this layer */ + if (!layer->started) + continue; + + if (layer->layer_first_int) { + layer->layer_first_int = 0; + continue; + } + /* Check the field format */ + if ((V4L2_FIELD_NONE == layer->pix_fmt.field) && + (event & VENC_END_OF_FRAME)) { + /* Progressive mode */ + + vpbe_isr_even_field(disp_dev, layer); + vpbe_isr_odd_field(disp_dev, layer); + } else { + /* Interlaced mode */ + + layer->field_id ^= 1; + if (event & VENC_FIRST_FIELD) + fid = 0; + else + fid = 1; + + /* + * If field id does not match with store + * field id + */ + if (fid != layer->field_id) { + /* Make them in sync */ + layer->field_id = fid; + continue; + } + /* + * device field id and local field id are + * in sync. If this is even field + */ + if (0 == fid) + vpbe_isr_even_field(disp_dev, layer); + else /* odd field */ + vpbe_isr_odd_field(disp_dev, layer); + } + } + + return IRQ_HANDLED; +} + +/* + * vpbe_buffer_prepare() + * This is the callback function called from vb2_qbuf() function + * the buffer is prepared and user space virtual address is converted into + * physical address + */ +static int vpbe_buffer_prepare(struct vb2_buffer *vb) +{ + struct vpbe_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_queue *q = vb->vb2_queue; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned long addr; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buffer_prepare\n"); + + if (vb->state != VB2_BUF_STATE_ACTIVE && + vb->state != VB2_BUF_STATE_PREPARED) { + vb2_set_plane_payload(vb, 0, layer->pix_fmt.sizeimage); + if (vb2_plane_vaddr(vb, 0) && + vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) + return -EINVAL; + + addr = vb2_dma_contig_plane_dma_addr(vb, 0); + if (q->streaming) { + if (!IS_ALIGNED(addr, 8)) { + v4l2_err(&vpbe_dev->v4l2_dev, + "buffer_prepare:offset is \ + not aligned to 32 bytes\n"); + return -EINVAL; + } + } + } + return 0; +} + +/* + * vpbe_buffer_setup() + * This function allocates memory for the buffers + */ +static int +vpbe_buffer_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) + +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = vb2_get_drv_priv(vq); + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n"); + + /* Store number of buffers allocated in numbuffer member */ + if (*nbuffers < VPBE_DEFAULT_NUM_BUFS) + *nbuffers = layer->numbuffers = VPBE_DEFAULT_NUM_BUFS; + + *nplanes = 1; + sizes[0] = layer->pix_fmt.sizeimage; + alloc_ctxs[0] = layer->alloc_ctx; + + return 0; +} + +/* + * vpbe_buffer_queue() + * This function adds the buffer to DMA queue + */ +static void vpbe_buffer_queue(struct vb2_buffer *vb) +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vpbe_disp_buffer *buf = container_of(vb, + struct vpbe_disp_buffer, vb); + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buffer_queue\n"); + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&disp->dma_queue_lock, flags); + list_add_tail(&buf->list, &layer->dma_queue); + spin_unlock_irqrestore(&disp->dma_queue_lock, flags); +} + +/* + * vpbe_buf_cleanup() + * This function is called from the vb2 layer to free memory allocated to + * the buffers + */ +static void vpbe_buf_cleanup(struct vb2_buffer *vb) +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct vpbe_disp_buffer *buf = container_of(vb, + struct vpbe_disp_buffer, vb); + unsigned long flags; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buf_cleanup\n"); + + spin_lock_irqsave(&layer->irqlock, flags); + if (vb->state == VB2_BUF_STATE_ACTIVE) + list_del_init(&buf->list); + spin_unlock_irqrestore(&layer->irqlock, flags); +} + +static void vpbe_wait_prepare(struct vb2_queue *vq) +{ + struct vpbe_fh *fh = vb2_get_drv_priv(vq); + struct vpbe_layer *layer = fh->layer; + + mutex_unlock(&layer->opslock); +} + +static void vpbe_wait_finish(struct vb2_queue *vq) +{ + struct vpbe_fh *fh = vb2_get_drv_priv(vq); + struct vpbe_layer *layer = fh->layer; + + mutex_lock(&layer->opslock); +} + +static int vpbe_buffer_init(struct vb2_buffer *vb) +{ + struct vpbe_disp_buffer *buf = container_of(vb, + struct vpbe_disp_buffer, vb); + + INIT_LIST_HEAD(&buf->list); + return 0; +} + +static int vpbe_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct vpbe_fh *fh = vb2_get_drv_priv(vq); + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + /* If buffer queue is empty, return error */ + if (list_empty(&layer->dma_queue)) { + v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n"); + return -EINVAL; + } + /* Get the next frame from the buffer queue */ + layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next, + struct vpbe_disp_buffer, list); + /* Remove buffer from the buffer queue */ + list_del(&layer->cur_frm->list); + /* Mark state of the current frame to active */ + layer->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE; + /* Initialize field_id and started member */ + layer->field_id = 0; + + /* Set parameters in OSD and VENC */ + ret = vpbe_set_osd_display_params(fh->disp_dev, layer); + if (ret < 0) + return ret; + + /* + * if request format is yuv420 semiplanar, need to + * enable both video windows + */ + layer->started = 1; + layer->layer_first_int = 1; + + return ret; +} + +static int vpbe_stop_streaming(struct vb2_queue *vq) +{ + struct vpbe_fh *fh = vb2_get_drv_priv(vq); + struct vpbe_layer *layer = fh->layer; + + if (!vb2_is_streaming(vq)) + return 0; + + /* release all active buffers */ + while (!list_empty(&layer->dma_queue)) { + layer->next_frm = list_entry(layer->dma_queue.next, + struct vpbe_disp_buffer, list); + list_del(&layer->next_frm->list); + vb2_buffer_done(&layer->next_frm->vb, VB2_BUF_STATE_ERROR); + } + + return 0; +} + +static struct vb2_ops video_qops = { + .queue_setup = vpbe_buffer_queue_setup, + .wait_prepare = vpbe_wait_prepare, + .wait_finish = vpbe_wait_finish, + .buf_init = vpbe_buffer_init, + .buf_prepare = vpbe_buffer_prepare, + .start_streaming = vpbe_start_streaming, + .stop_streaming = vpbe_stop_streaming, + .buf_cleanup = vpbe_buf_cleanup, + .buf_queue = vpbe_buffer_queue, +}; + +static +struct vpbe_layer* +_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev, + struct vpbe_layer *layer) +{ + enum vpbe_display_device_id thiswin, otherwin; + thiswin = layer->device_id; + + otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ? + VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0; + return disp_dev->dev[otherwin]; +} + +static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev, + struct vpbe_layer *layer) +{ + struct osd_layer_config *cfg = &layer->layer_info.config; + struct osd_state *osd_device = disp_dev->osd_device; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + unsigned long addr; + int ret; + + addr = vb2_dma_contig_plane_dma_addr(&layer->cur_frm->vb, 0); + /* Set address in the display registers */ + osd_device->ops.start_layer(osd_device, + layer->layer_info.id, + addr, + disp_dev->cbcr_ofst); + + ret = osd_device->ops.enable_layer(osd_device, + layer->layer_info.id, 0); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in enabling osd window layer 0\n"); + return -1; + } + + /* Enable the window */ + layer->layer_info.enable = 1; + if (cfg->pixfmt == PIXFMT_NV12) { + struct vpbe_layer *otherlayer = + _vpbe_display_get_other_win_layer(disp_dev, layer); + + ret = osd_device->ops.enable_layer(osd_device, + otherlayer->layer_info.id, 1); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in enabling osd window layer 1\n"); + return -1; + } + otherlayer->layer_info.enable = 1; + } + return 0; +} + +static void +vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev, + struct vpbe_layer *layer, + int expected_xsize, int expected_ysize) +{ + struct display_layer_info *layer_info = &layer->layer_info; + struct v4l2_pix_format *pixfmt = &layer->pix_fmt; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int calculated_xsize; + int h_exp = 0; + int v_exp = 0; + int h_scale; + int v_scale; + + v4l2_std_id standard_id = vpbe_dev->current_timings.std_id; + + /* + * Application initially set the image format. Current display + * size is obtained from the vpbe display controller. expected_xsize + * and expected_ysize are set through S_CROP ioctl. Based on this, + * driver will calculate the scale factors for vertical and + * horizontal direction so that the image is displayed scaled + * and expanded. Application uses expansion to display the image + * in a square pixel. Otherwise it is displayed using displays + * pixel aspect ratio.It is expected that application chooses + * the crop coordinates for cropped or scaled display. if crop + * size is less than the image size, it is displayed cropped or + * it is displayed scaled and/or expanded. + * + * to begin with, set the crop window same as expected. Later we + * will override with scaled window size + */ + + cfg->xsize = pixfmt->width; + cfg->ysize = pixfmt->height; + layer_info->h_zoom = ZOOM_X1; /* no horizontal zoom */ + layer_info->v_zoom = ZOOM_X1; /* no horizontal zoom */ + layer_info->h_exp = H_EXP_OFF; /* no horizontal zoom */ + layer_info->v_exp = V_EXP_OFF; /* no horizontal zoom */ + + if (pixfmt->width < expected_xsize) { + h_scale = vpbe_dev->current_timings.xres / pixfmt->width; + if (h_scale < 2) + h_scale = 1; + else if (h_scale >= 4) + h_scale = 4; + else + h_scale = 2; + cfg->xsize *= h_scale; + if (cfg->xsize < expected_xsize) { + if ((standard_id & V4L2_STD_525_60) || + (standard_id & V4L2_STD_625_50)) { + calculated_xsize = (cfg->xsize * + VPBE_DISPLAY_H_EXP_RATIO_N) / + VPBE_DISPLAY_H_EXP_RATIO_D; + if (calculated_xsize <= expected_xsize) { + h_exp = 1; + cfg->xsize = calculated_xsize; + } + } + } + if (h_scale == 2) + layer_info->h_zoom = ZOOM_X2; + else if (h_scale == 4) + layer_info->h_zoom = ZOOM_X4; + if (h_exp) + layer_info->h_exp = H_EXP_9_OVER_8; + } else { + /* no scaling, only cropping. Set display area to crop area */ + cfg->xsize = expected_xsize; + } + + if (pixfmt->height < expected_ysize) { + v_scale = expected_ysize / pixfmt->height; + if (v_scale < 2) + v_scale = 1; + else if (v_scale >= 4) + v_scale = 4; + else + v_scale = 2; + cfg->ysize *= v_scale; + if (cfg->ysize < expected_ysize) { + if ((standard_id & V4L2_STD_625_50)) { + calculated_xsize = (cfg->ysize * + VPBE_DISPLAY_V_EXP_RATIO_N) / + VPBE_DISPLAY_V_EXP_RATIO_D; + if (calculated_xsize <= expected_ysize) { + v_exp = 1; + cfg->ysize = calculated_xsize; + } + } + } + if (v_scale == 2) + layer_info->v_zoom = ZOOM_X2; + else if (v_scale == 4) + layer_info->v_zoom = ZOOM_X4; + if (v_exp) + layer_info->h_exp = V_EXP_6_OVER_5; + } else { + /* no scaling, only cropping. Set display area to crop area */ + cfg->ysize = expected_ysize; + } + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "crop display xsize = %d, ysize = %d\n", + cfg->xsize, cfg->ysize); +} + +static void vpbe_disp_adj_position(struct vpbe_display *disp_dev, + struct vpbe_layer *layer, + int top, int left) +{ + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + + cfg->xpos = min((unsigned int)left, + vpbe_dev->current_timings.xres - cfg->xsize); + cfg->ypos = min((unsigned int)top, + vpbe_dev->current_timings.yres - cfg->ysize); + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "new xpos = %d, ypos = %d\n", + cfg->xpos, cfg->ypos); +} + +static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev, + struct v4l2_rect *c) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + + if ((c->width == 0) || + ((c->width + c->left) > vpbe_dev->current_timings.xres)) + c->width = vpbe_dev->current_timings.xres - c->left; + + if ((c->height == 0) || ((c->height + c->top) > + vpbe_dev->current_timings.yres)) + c->height = vpbe_dev->current_timings.yres - c->top; + + /* window height must be even for interlaced display */ + if (vpbe_dev->current_timings.interlaced) + c->height &= (~0x01); + +} + +/** + * vpbe_try_format() + * If user application provides width and height, and have bytesperline set + * to zero, driver calculates bytesperline and sizeimage based on hardware + * limits. + */ +static int vpbe_try_format(struct vpbe_display *disp_dev, + struct v4l2_pix_format *pixfmt, int check) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int min_height = 1; + int min_width = 32; + int max_height; + int max_width; + int bpp; + + if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) && + (pixfmt->pixelformat != V4L2_PIX_FMT_NV12)) + /* choose default as V4L2_PIX_FMT_UYVY */ + pixfmt->pixelformat = V4L2_PIX_FMT_UYVY; + + /* Check the field format */ + if ((pixfmt->field != V4L2_FIELD_INTERLACED) && + (pixfmt->field != V4L2_FIELD_NONE)) { + if (vpbe_dev->current_timings.interlaced) + pixfmt->field = V4L2_FIELD_INTERLACED; + else + pixfmt->field = V4L2_FIELD_NONE; + } + + if (pixfmt->field == V4L2_FIELD_INTERLACED) + min_height = 2; + + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + bpp = 1; + else + bpp = 2; + + max_width = vpbe_dev->current_timings.xres; + max_height = vpbe_dev->current_timings.yres; + + min_width /= bpp; + + if (!pixfmt->width || (pixfmt->width < min_width) || + (pixfmt->width > max_width)) { + pixfmt->width = vpbe_dev->current_timings.xres; + } + + if (!pixfmt->height || (pixfmt->height < min_height) || + (pixfmt->height > max_height)) { + pixfmt->height = vpbe_dev->current_timings.yres; + } + + if (pixfmt->bytesperline < (pixfmt->width * bpp)) + pixfmt->bytesperline = pixfmt->width * bpp; + + /* Make the bytesperline 32 byte aligned */ + pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31); + + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height + + (pixfmt->bytesperline * pixfmt->height >> 1); + else + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + return 0; +} + +static int vpbe_display_g_priority(struct file *file, void *priv, + enum v4l2_priority *p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + + *p = v4l2_prio_max(&layer->prio); + + return 0; +} + +static int vpbe_display_s_priority(struct file *file, void *priv, + enum v4l2_priority p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + int ret; + + ret = v4l2_prio_change(&layer->prio, &fh->prio, p); + + return ret; +} + +static int vpbe_display_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + cap->version = VPBE_DISPLAY_VERSION_CODE; + cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + snprintf(cap->driver, sizeof(cap->driver), "%s", + dev_name(vpbe_dev->pdev)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + dev_name(vpbe_dev->pdev)); + strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card)); + + return 0; +} + +static int vpbe_display_s_crop(struct file *file, void *priv, + const struct v4l2_crop *crop) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct osd_state *osd_device = disp_dev->osd_device; + struct v4l2_rect rect = crop->c; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_S_CROP, layer id = %d\n", layer->device_id); + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + if (rect.top < 0) + rect.top = 0; + if (rect.left < 0) + rect.left = 0; + + vpbe_disp_check_window_params(disp_dev, &rect); + + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + + vpbe_disp_calculate_scale_factor(disp_dev, layer, + rect.width, + rect.height); + vpbe_disp_adj_position(disp_dev, layer, rect.top, + rect.left); + ret = osd_device->ops.set_layer_config(osd_device, + layer->layer_info.id, cfg); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in set layer config:\n"); + return -EINVAL; + } + + /* apply zooming and h or v expansion */ + osd_device->ops.set_zoom(osd_device, + layer->layer_info.id, + layer->layer_info.h_zoom, + layer->layer_info.v_zoom); + ret = osd_device->ops.set_vid_expansion(osd_device, + layer->layer_info.h_exp, + layer->layer_info.v_exp); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in set vid expansion:\n"); + return -EINVAL; + } + + if ((layer->layer_info.h_zoom != ZOOM_X1) || + (layer->layer_info.v_zoom != ZOOM_X1) || + (layer->layer_info.h_exp != H_EXP_OFF) || + (layer->layer_info.v_exp != V_EXP_OFF)) + /* Enable expansion filter */ + osd_device->ops.set_interpolation_filter(osd_device, 1); + else + osd_device->ops.set_interpolation_filter(osd_device, 0); + + return 0; +} + +static int vpbe_display_g_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = fh->disp_dev->osd_device; + struct v4l2_rect *rect = &crop->c; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_G_CROP, layer id = %d\n", + layer->device_id); + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + rect->top = cfg->ypos; + rect->left = cfg->xpos; + rect->width = cfg->xsize; + rect->height = cfg->ysize; + + return 0; +} + +static int vpbe_display_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cropcap) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n"); + + cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + cropcap->bounds.left = 0; + cropcap->bounds.top = 0; + cropcap->bounds.width = vpbe_dev->current_timings.xres; + cropcap->bounds.height = vpbe_dev->current_timings.yres; + cropcap->pixelaspect = vpbe_dev->current_timings.aspect; + cropcap->defrect = cropcap->bounds; + return 0; +} + +static int vpbe_display_g_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_G_FMT, layer id = %d\n", + layer->device_id); + + /* If buffer type is video output */ + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + /* Fill in the information about format */ + fmt->fmt.pix = layer->pix_fmt; + + return 0; +} + +static int vpbe_display_enum_fmt(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned int index = 0; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_ENUM_FMT, layer id = %d\n", + layer->device_id); + if (fmt->index > 1) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + index = fmt->index; + memset(fmt, 0, sizeof(*fmt)); + fmt->index = index; + fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + if (index == 0) { + strcpy(fmt->description, "YUV 4:2:2 - UYVY"); + fmt->pixelformat = V4L2_PIX_FMT_UYVY; + } else { + strcpy(fmt->description, "Y/CbCr 4:2:0"); + fmt->pixelformat = V4L2_PIX_FMT_NV12; + } + + return 0; +} + +static int vpbe_display_s_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + struct osd_state *osd_device = disp_dev->osd_device; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_S_FMT, layer id = %d\n", + layer->device_id); + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + /* Check for valid pixel format */ + ret = vpbe_try_format(disp_dev, pixfmt, 1); + if (ret) + return ret; + + /* YUV420 is requested, check availability of the + other video window */ + + layer->pix_fmt = *pixfmt; + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) { + struct vpbe_layer *otherlayer; + + otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer); + /* if other layer is available, only + * claim it, do not configure it + */ + ret = osd_device->ops.request_layer(osd_device, + otherlayer->layer_info.id); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Display Manager failed to allocate layer\n"); + return -EBUSY; + } + } + + /* Get osd layer config */ + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + /* Store the pixel format in the layer object */ + cfg->xsize = pixfmt->width; + cfg->ysize = pixfmt->height; + cfg->line_length = pixfmt->bytesperline; + cfg->ypos = 0; + cfg->xpos = 0; + cfg->interlaced = vpbe_dev->current_timings.interlaced; + + if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat) + cfg->pixfmt = PIXFMT_YCbCrI; + + /* Change of the default pixel format for both video windows */ + if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) { + struct vpbe_layer *otherlayer; + cfg->pixfmt = PIXFMT_NV12; + otherlayer = _vpbe_display_get_other_win_layer(disp_dev, + layer); + otherlayer->layer_info.config.pixfmt = PIXFMT_NV12; + } + + /* Set the layer config in the osd window */ + ret = osd_device->ops.set_layer_config(osd_device, + layer->layer_info.id, cfg); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in S_FMT params:\n"); + return -EINVAL; + } + + /* Readback and fill the local copy of current pix format */ + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + + return 0; +} + +static int vpbe_display_try_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n"); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + + /* Check for valid field format */ + return vpbe_try_format(disp_dev, pixfmt, 0); + +} + +/** + * vpbe_display_s_std - Set the given standard in the encoder + * + * Sets the standard if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_display_s_std(struct file *file, void *priv, + v4l2_std_id std_id) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n"); + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (NULL != vpbe_dev->ops.s_std) { + ret = vpbe_dev->ops.s_std(vpbe_dev, std_id); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set standard for sub devices\n"); + return -EINVAL; + } + } else { + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_g_std - Get the standard in the current encoder + * + * Get the standard in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_display_g_std(struct file *file, void *priv, + v4l2_std_id *std_id) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_STD\n"); + + /* Get the standard from the current encoder */ + if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) { + *std_id = vpbe_dev->current_timings.std_id; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_display_enum_output - enumerate outputs + * + * Enumerates the outputs available at the vpbe display + * returns the status, -EINVAL if end of output list + */ +static int vpbe_display_enum_output(struct file *file, void *priv, + struct v4l2_output *output) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_OUTPUT\n"); + + /* Enumerate outputs */ + + if (NULL == vpbe_dev->ops.enum_outputs) + return -EINVAL; + + ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output); + if (ret) { + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "Failed to enumerate outputs\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_s_output - Set output to + * the output specified by the index + */ +static int vpbe_display_s_output(struct file *file, void *priv, + unsigned int i) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_OUTPUT\n"); + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (NULL == vpbe_dev->ops.set_output) + return -EINVAL; + + ret = vpbe_dev->ops.set_output(vpbe_dev, i); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set output for sub devices\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_g_output - Get output from subdevice + * for a given by the index + */ +static int vpbe_display_g_output(struct file *file, void *priv, + unsigned int *i) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n"); + /* Get the standard from the current encoder */ + *i = vpbe_dev->current_out_index; + + return 0; +} + +/** + * vpbe_display_enum_dv_timings - Enumerate the dv timings + * + * enum the timings in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_enum_dv_timings(struct file *file, void *priv, + struct v4l2_enum_dv_timings *timings) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_TIMINGS\n"); + + /* Enumerate outputs */ + if (NULL == vpbe_dev->ops.enum_dv_timings) + return -EINVAL; + + ret = vpbe_dev->ops.enum_dv_timings(vpbe_dev, timings); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to enumerate dv timings info\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_s_dv_timings - Set the dv timings + * + * Set the timings in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_TIMINGS\n"); + + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + + /* Set the given standard in the encoder */ + if (!vpbe_dev->ops.s_dv_timings) + return -EINVAL; + + ret = vpbe_dev->ops.s_dv_timings(vpbe_dev, timings); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set the dv timings info\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_g_dv_timings - Set the dv timings + * + * Get the timings in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *dv_timings) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_TIMINGS\n"); + + /* Get the given standard in the encoder */ + + if (vpbe_dev->current_timings.timings_type & + VPBE_ENC_DV_TIMINGS) { + *dv_timings = vpbe_dev->current_timings.dv_timings; + } else { + return -EINVAL; + } + + return 0; +} + +static int vpbe_display_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = fh->disp_dev->osd_device; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_STREAMOFF,layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "streaming not started in layer" + " id = %d\n", layer->device_id); + return -EINVAL; + } + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + layer->started = 0; + ret = vb2_streamoff(&layer->buffer_queue, buf_type); + + return ret; +} + +static int vpbe_display_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + int ret; + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_STREAMON, layerid=%d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + /* If Streaming is already started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "layer is already streaming\n"); + return -EBUSY; + } + + /* + * Call vb2_streamon to start streaming + * in videobuf + */ + ret = vb2_streamon(&layer->buffer_queue, buf_type); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "error in vb2_streamon\n"); + return ret; + } + return ret; +} + +static int vpbe_display_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_DQBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + /* If this file handle is not allowed to do IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + if (file->f_flags & O_NONBLOCK) + /* Call videobuf_dqbuf for non blocking mode */ + ret = vb2_dqbuf(&layer->buffer_queue, buf, 1); + else + /* Call videobuf_dqbuf for blocking mode */ + ret = vb2_dqbuf(&layer->buffer_queue, buf, 0); + + return ret; +} + +static int vpbe_display_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_QBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If this file handle is not allowed to do IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + + return vb2_qbuf(&layer->buffer_queue, p); +} + +static int vpbe_display_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_QUERYBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + /* Call vb2_querybuf to get information */ + return vb2_querybuf(&layer->buffer_queue, buf); +} + +static int vpbe_display_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct vb2_queue *q; + int ret; + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_reqbufs\n"); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If io users of the layer is not zero, return error */ + if (0 != layer->io_usrs) { + v4l2_err(&vpbe_dev->v4l2_dev, "not IO user\n"); + return -EBUSY; + } + /* Initialize videobuf queue as per the buffer type */ + layer->alloc_ctx = vb2_dma_contig_init_ctx(vpbe_dev->pdev); + if (IS_ERR(layer->alloc_ctx)) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to get the context\n"); + return PTR_ERR(layer->alloc_ctx); + } + q = &layer->buffer_queue; + memset(q, 0, sizeof(*q)); + q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = fh; + q->ops = &video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct vpbe_disp_buffer); + q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + + ret = vb2_queue_init(q); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, "vb2_queue_init() failed\n"); + vb2_dma_contig_cleanup_ctx(layer->alloc_ctx); + return ret; + } + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed = 1; + /* Increment io usrs member of layer object to 1 */ + layer->io_usrs = 1; + /* Store type of memory requested in layer object */ + layer->memory = req_buf->memory; + /* Initialize buffer queue */ + INIT_LIST_HEAD(&layer->dma_queue); + /* Allocate buffers */ + return vb2_reqbufs(q, req_buf); +} + +/* + * vpbe_display_mmap() + * It is used to map kernel space buffers into user spaces + */ +static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma) +{ + /* Get the layer object and file handle object */ + struct vpbe_fh *fh = filep->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n"); + + if (mutex_lock_interruptible(&layer->opslock)) + return -ERESTARTSYS; + ret = vb2_mmap(&layer->buffer_queue, vma); + mutex_unlock(&layer->opslock); + return ret; +} + +/* vpbe_display_poll(): It is used for select/poll system call + */ +static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait) +{ + struct vpbe_fh *fh = filep->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned int err = 0; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n"); + if (layer->started) { + mutex_lock(&layer->opslock); + err = vb2_poll(&layer->buffer_queue, filep, wait); + mutex_unlock(&layer->opslock); + } + return err; +} + +/* + * vpbe_display_open() + * It creates object of file handle structure and stores it in private_data + * member of filepointer + */ +static int vpbe_display_open(struct file *file) +{ + struct vpbe_fh *fh = NULL; + struct vpbe_layer *layer = video_drvdata(file); + struct vpbe_display *disp_dev = layer->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + int err; + + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpbe_fh), GFP_KERNEL); + if (fh == NULL) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe display open plane = %d\n", + layer->device_id); + + /* store pointer to fh in private_data member of filep */ + file->private_data = fh; + fh->layer = layer; + fh->disp_dev = disp_dev; + + if (!layer->usrs) { + if (mutex_lock_interruptible(&layer->opslock)) + return -ERESTARTSYS; + /* First claim the layer for this device */ + err = osd_device->ops.request_layer(osd_device, + layer->layer_info.id); + mutex_unlock(&layer->opslock); + if (err < 0) { + /* Couldn't get layer */ + v4l2_err(&vpbe_dev->v4l2_dev, + "Display Manager failed to allocate layer\n"); + kfree(fh); + return -EINVAL; + } + } + /* Increment layer usrs counter */ + layer->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&layer->prio, &fh->prio); + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe display device opened successfully\n"); + return 0; +} + +/* + * vpbe_display_release() + * This function deletes buffer queue, frees the buffers and the davinci + * display file * handle + */ +static int vpbe_display_release(struct file *file) +{ + /* Get the layer object and file handle object */ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n"); + + mutex_lock(&layer->opslock); + /* if this instance is doing IO */ + if (fh->io_allowed) { + /* Reset io_usrs member of layer object */ + layer->io_usrs = 0; + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + layer->started = 0; + /* Free buffers allocated */ + vb2_queue_release(&layer->buffer_queue); + vb2_dma_contig_cleanup_ctx(&layer->buffer_queue); + } + + /* Decrement layer usrs counter */ + layer->usrs--; + /* If this file handle has initialize encoder device, reset it */ + if (!layer->usrs) { + if (cfg->pixfmt == PIXFMT_NV12) { + struct vpbe_layer *otherlayer; + otherlayer = + _vpbe_display_get_other_win_layer(disp_dev, layer); + osd_device->ops.disable_layer(osd_device, + otherlayer->layer_info.id); + osd_device->ops.release_layer(osd_device, + otherlayer->layer_info.id); + } + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + osd_device->ops.release_layer(osd_device, + layer->layer_info.id); + } + /* Close the priority */ + v4l2_prio_close(&layer->prio, fh->prio); + file->private_data = NULL; + mutex_unlock(&layer->opslock); + + /* Free memory allocated to file handle object */ + kfree(fh); + + disp_dev->cbcr_ofst = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vpbe_display_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct v4l2_dbg_match *match = ®->match; + struct vpbe_fh *fh = file->private_data; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + if (match->type >= 2) { + v4l2_subdev_call(vpbe_dev->venc, + core, + g_register, + reg); + } + + return 0; +} + +static int vpbe_display_s_register(struct file *file, void *priv, + const struct v4l2_dbg_register *reg) +{ + return 0; +} +#endif + +/* vpbe capture ioctl operations */ +static const struct v4l2_ioctl_ops vpbe_ioctl_ops = { + .vidioc_querycap = vpbe_display_querycap, + .vidioc_g_fmt_vid_out = vpbe_display_g_fmt, + .vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt, + .vidioc_s_fmt_vid_out = vpbe_display_s_fmt, + .vidioc_try_fmt_vid_out = vpbe_display_try_fmt, + .vidioc_reqbufs = vpbe_display_reqbufs, + .vidioc_querybuf = vpbe_display_querybuf, + .vidioc_qbuf = vpbe_display_qbuf, + .vidioc_dqbuf = vpbe_display_dqbuf, + .vidioc_streamon = vpbe_display_streamon, + .vidioc_streamoff = vpbe_display_streamoff, + .vidioc_cropcap = vpbe_display_cropcap, + .vidioc_g_crop = vpbe_display_g_crop, + .vidioc_s_crop = vpbe_display_s_crop, + .vidioc_g_priority = vpbe_display_g_priority, + .vidioc_s_priority = vpbe_display_s_priority, + .vidioc_s_std = vpbe_display_s_std, + .vidioc_g_std = vpbe_display_g_std, + .vidioc_enum_output = vpbe_display_enum_output, + .vidioc_s_output = vpbe_display_s_output, + .vidioc_g_output = vpbe_display_g_output, + .vidioc_s_dv_timings = vpbe_display_s_dv_timings, + .vidioc_g_dv_timings = vpbe_display_g_dv_timings, + .vidioc_enum_dv_timings = vpbe_display_enum_dv_timings, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpbe_display_g_register, + .vidioc_s_register = vpbe_display_s_register, +#endif +}; + +static struct v4l2_file_operations vpbe_fops = { + .owner = THIS_MODULE, + .open = vpbe_display_open, + .release = vpbe_display_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpbe_display_mmap, + .poll = vpbe_display_poll +}; + +static int vpbe_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vpbe_display *vpbe_disp = data; + + if (strcmp("vpbe_controller", pdev->name) == 0) + vpbe_disp->vpbe_dev = platform_get_drvdata(pdev); + + if (strstr(pdev->name, "vpbe-osd") != NULL) + vpbe_disp->osd_device = platform_get_drvdata(pdev); + + return 0; +} + +static int init_vpbe_layer(int i, struct vpbe_display *disp_dev, + struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer = NULL; + struct video_device *vbd = NULL; + + /* Allocate memory for four plane display objects */ + + disp_dev->dev[i] = + kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL); + + /* If memory allocation fails, return error */ + if (!disp_dev->dev[i]) { + printk(KERN_ERR "ran out of memory\n"); + return -ENOMEM; + } + spin_lock_init(&disp_dev->dev[i]->irqlock); + mutex_init(&disp_dev->dev[i]->opslock); + + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[i]; + vbd = &vpbe_display_layer->video_dev; + /* Initialize field of video device */ + vbd->release = video_device_release_empty; + vbd->fops = &vpbe_fops; + vbd->ioctl_ops = &vpbe_ioctl_ops; + vbd->minor = -1; + vbd->v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev; + vbd->lock = &vpbe_display_layer->opslock; + vbd->vfl_dir = VFL_DIR_TX; + + if (disp_dev->vpbe_dev->current_timings.timings_type & + VPBE_ENC_STD) + vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50); + + snprintf(vbd->name, sizeof(vbd->name), + "DaVinci_VPBE Display_DRIVER_V%d.%d.%d", + (VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff, + (VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff, + (VPBE_DISPLAY_VERSION_CODE) & 0xff); + + vpbe_display_layer->device_id = i; + + vpbe_display_layer->layer_info.id = + ((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1); + + /* Initialize prio member of layer object */ + v4l2_prio_init(&vpbe_display_layer->prio); + + return 0; +} + +static int register_device(struct vpbe_layer *vpbe_display_layer, + struct vpbe_display *disp_dev, + struct platform_device *pdev) +{ + int err; + + v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, + "Trying to register VPBE display device.\n"); + v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, + "layer=%x,layer->video_dev=%x\n", + (int)vpbe_display_layer, + (int)&vpbe_display_layer->video_dev); + + err = video_register_device(&vpbe_display_layer->video_dev, + VFL_TYPE_GRABBER, + -1); + if (err) + return -ENODEV; + + vpbe_display_layer->disp_dev = disp_dev; + /* set the driver data in platform device */ + platform_set_drvdata(pdev, disp_dev); + video_set_drvdata(&vpbe_display_layer->video_dev, + vpbe_display_layer); + + return 0; +} + + + +/* + * vpbe_display_probe() + * This function creates device entries by register itself to the V4L2 driver + * and initializes fields of each layer objects + */ +static int vpbe_display_probe(struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer; + struct vpbe_display *disp_dev; + struct resource *res = NULL; + int k; + int i; + int err; + int irq; + + printk(KERN_DEBUG "vpbe_display_probe\n"); + /* Allocate memory for vpbe_display */ + disp_dev = kzalloc(sizeof(struct vpbe_display), GFP_KERNEL); + if (!disp_dev) { + printk(KERN_ERR "ran out of memory\n"); + return -ENOMEM; + } + + spin_lock_init(&disp_dev->dma_queue_lock); + /* + * Scan all the platform devices to find the vpbe + * controller device and get the vpbe_dev object + */ + err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev, + vpbe_device_get); + if (err < 0) + return err; + /* Initialize the vpbe display controller */ + if (NULL != disp_dev->vpbe_dev->ops.initialize) { + err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev, + disp_dev->vpbe_dev); + if (err) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Error initing vpbe\n"); + err = -ENOMEM; + goto probe_out; + } + } + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + if (init_vpbe_layer(i, disp_dev, pdev)) { + err = -ENODEV; + goto probe_out; + } + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Unable to get VENC interrupt resource\n"); + err = -ENODEV; + goto probe_out; + } + + irq = res->start; + if (request_irq(irq, venc_isr, IRQF_DISABLED, VPBE_DISPLAY_DRIVER, + disp_dev)) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Unable to request interrupt\n"); + err = -ENODEV; + goto probe_out; + } + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + if (register_device(disp_dev->dev[i], disp_dev, pdev)) { + err = -ENODEV; + goto probe_out_irq; + } + } + + printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n"); + return 0; + +probe_out_irq: + free_irq(res->start, disp_dev); +probe_out: + for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) { + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[k]; + /* Unregister video device */ + if (vpbe_display_layer) { + video_unregister_device( + &vpbe_display_layer->video_dev); + kfree(disp_dev->dev[k]); + } + } + kfree(disp_dev); + return err; +} + +/* + * vpbe_display_remove() + * It un-register hardware layer from V4L2 driver + */ +static int vpbe_display_remove(struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer; + struct vpbe_display *disp_dev = platform_get_drvdata(pdev); + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct resource *res; + int i; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n"); + + /* unregister irq */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + free_irq(res->start, disp_dev); + + /* deinitialize the vpbe display controller */ + if (NULL != vpbe_dev->ops.deinitialize) + vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev); + /* un-register device */ + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[i]; + /* Unregister video device */ + video_unregister_device(&vpbe_display_layer->video_dev); + + } + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + kfree(disp_dev->dev[i]); + disp_dev->dev[i] = NULL; + } + + return 0; +} + +static struct platform_driver vpbe_display_driver = { + .driver = { + .name = VPBE_DISPLAY_DRIVER, + .owner = THIS_MODULE, + .bus = &platform_bus_type, + }, + .probe = vpbe_display_probe, + .remove = vpbe_display_remove, +}; + +module_platform_driver(vpbe_display_driver); + +MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/davinci/vpbe_osd.c b/drivers/media/platform/davinci/vpbe_osd.c new file mode 100644 index 00000000..396a51cb --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_osd.c @@ -0,0 +1,1622 @@ +/* + * Copyright (C) 2007-2010 Texas Instruments Inc + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Andy Lowe (alowe@mvista.com), MontaVista Software + * - Initial version + * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. + * - ported to sub device interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include "vpbe_osd_regs.h" + +#define MODULE_NAME "davinci-vpbe-osd" + +static struct platform_device_id vpbe_osd_devtype[] = { + { + .name = DM644X_VPBE_OSD_SUBDEV_NAME, + .driver_data = VPBE_VERSION_1, + }, { + .name = DM365_VPBE_OSD_SUBDEV_NAME, + .driver_data = VPBE_VERSION_2, + }, { + .name = DM355_VPBE_OSD_SUBDEV_NAME, + .driver_data = VPBE_VERSION_3, + }, + { + /* sentinel */ + } +}; + +MODULE_DEVICE_TABLE(platform, vpbe_osd_devtype); + +/* register access routines */ +static inline u32 osd_read(struct osd_state *sd, u32 offset) +{ + struct osd_state *osd = sd; + + return readl(osd->osd_base + offset); +} + +static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset) +{ + struct osd_state *osd = sd; + + writel(val, osd->osd_base + offset); + + return val; +} + +static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset) +{ + struct osd_state *osd = sd; + + void __iomem *addr = osd->osd_base + offset; + u32 val = readl(addr) | mask; + + writel(val, addr); + + return val; +} + +static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset) +{ + struct osd_state *osd = sd; + + void __iomem *addr = osd->osd_base + offset; + u32 val = readl(addr) & ~mask; + + writel(val, addr); + + return val; +} + +static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val, + u32 offset) +{ + struct osd_state *osd = sd; + + void __iomem *addr = osd->osd_base + offset; + u32 new_val = (readl(addr) & ~mask) | (val & mask); + + writel(new_val, addr); + + return new_val; +} + +/* define some macros for layer and pixfmt classification */ +#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1)) +#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1)) +#define is_rgb_pixfmt(pixfmt) \ + (((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888)) +#define is_yc_pixfmt(pixfmt) \ + (((pixfmt) == PIXFMT_YCbCrI) || ((pixfmt) == PIXFMT_YCrCbI) || \ + ((pixfmt) == PIXFMT_NV12)) +#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X +#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5) + +/** + * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446 + * @sd - ptr to struct osd_state + * @field_inversion - inversion flag + * @fb_base_phys - frame buffer address + * @lconfig - ptr to layer config + * + * This routine implements a workaround for the field signal inversion silicon + * erratum described in Advisory 1.3.8 for the DM6446. The fb_base_phys and + * lconfig parameters apply to the vid0 window. This routine should be called + * whenever the vid0 layer configuration or start address is modified, or when + * the OSD field inversion setting is modified. + * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or + * 0 otherwise + */ +static int _osd_dm6446_vid0_pingpong(struct osd_state *sd, + int field_inversion, + unsigned long fb_base_phys, + const struct osd_layer_config *lconfig) +{ + struct osd_platform_data *pdata; + + pdata = (struct osd_platform_data *)sd->dev->platform_data; + if (pdata != NULL && pdata->field_inv_wa_enable) { + + if (!field_inversion || !lconfig->interlaced) { + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR); + osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR); + osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0, + OSD_MISCCTL); + return 0; + } else { + unsigned miscctl = OSD_MISCCTL_PPRV; + + osd_write(sd, + (fb_base_phys & ~0x1F) - lconfig->line_length, + OSD_VIDWIN0ADR); + osd_write(sd, + (fb_base_phys & ~0x1F) + lconfig->line_length, + OSD_PPVWIN0ADR); + osd_modify(sd, + OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl, + OSD_MISCCTL); + + return 1; + } + } + + return 0; +} + +static void _osd_set_field_inversion(struct osd_state *sd, int enable) +{ + unsigned fsinv = 0; + + if (enable) + fsinv = OSD_MODE_FSINV; + + osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE); +} + +static void _osd_set_blink_attribute(struct osd_state *sd, int enable, + enum osd_blink_interval blink) +{ + u32 osdatrmd = 0; + + if (enable) { + osdatrmd |= OSD_OSDATRMD_BLNK; + osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT; + } + /* caller must ensure that OSD1 is configured in attribute mode */ + osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd, + OSD_OSDATRMD); +} + +static void _osd_set_rom_clut(struct osd_state *sd, + enum osd_rom_clut rom_clut) +{ + if (rom_clut == ROM_CLUT0) + osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL); + else + osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL); +} + +static void _osd_set_palette_map(struct osd_state *sd, + enum osd_win_layer osdwin, + unsigned char pixel_value, + unsigned char clut_index, + enum osd_pix_format pixfmt) +{ + static const int map_2bpp[] = { 0, 5, 10, 15 }; + static const int map_1bpp[] = { 0, 15 }; + int bmp_offset; + int bmp_shift; + int bmp_mask; + int bmp_reg; + + switch (pixfmt) { + case PIXFMT_1BPP: + bmp_reg = map_1bpp[pixel_value & 0x1]; + break; + case PIXFMT_2BPP: + bmp_reg = map_2bpp[pixel_value & 0x3]; + break; + case PIXFMT_4BPP: + bmp_reg = pixel_value & 0xf; + break; + default: + return; + } + + switch (osdwin) { + case OSDWIN_OSD0: + bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32); + break; + case OSDWIN_OSD1: + bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32); + break; + default: + return; + } + + if (bmp_reg & 1) { + bmp_shift = 8; + bmp_mask = 0xff << 8; + } else { + bmp_shift = 0; + bmp_mask = 0xff; + } + + osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset); +} + +static void _osd_set_rec601_attenuation(struct osd_state *sd, + enum osd_win_layer osdwin, int enable) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_OSDWIN0MD_ATN0E, + enable ? OSD_OSDWIN0MD_ATN0E : 0, + OSD_OSDWIN0MD); + if (sd->vpbe_type == VPBE_VERSION_1) + osd_modify(sd, OSD_OSDWIN0MD_ATN0E, + enable ? OSD_OSDWIN0MD_ATN0E : 0, + OSD_OSDWIN0MD); + else if ((sd->vpbe_type == VPBE_VERSION_3) || + (sd->vpbe_type == VPBE_VERSION_2)) + osd_modify(sd, OSD_EXTMODE_ATNOSD0EN, + enable ? OSD_EXTMODE_ATNOSD0EN : 0, + OSD_EXTMODE); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_OSDWIN1MD_ATN1E, + enable ? OSD_OSDWIN1MD_ATN1E : 0, + OSD_OSDWIN1MD); + if (sd->vpbe_type == VPBE_VERSION_1) + osd_modify(sd, OSD_OSDWIN1MD_ATN1E, + enable ? OSD_OSDWIN1MD_ATN1E : 0, + OSD_OSDWIN1MD); + else if ((sd->vpbe_type == VPBE_VERSION_3) || + (sd->vpbe_type == VPBE_VERSION_2)) + osd_modify(sd, OSD_EXTMODE_ATNOSD1EN, + enable ? OSD_EXTMODE_ATNOSD1EN : 0, + OSD_EXTMODE); + break; + } +} + +static void _osd_set_blending_factor(struct osd_state *sd, + enum osd_win_layer osdwin, + enum osd_blending_factor blend) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_OSDWIN0MD_BLND0, + blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_OSDWIN1MD_BLND1, + blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_enable_rgb888_pixblend(struct osd_state *sd, + enum osd_win_layer osdwin) +{ + + osd_modify(sd, OSD_MISCCTL_BLDSEL, 0, OSD_MISCCTL); + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_EXTMODE_OSD0BLDCHR, + OSD_EXTMODE_OSD0BLDCHR, OSD_EXTMODE); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_EXTMODE_OSD1BLDCHR, + OSD_EXTMODE_OSD1BLDCHR, OSD_EXTMODE); + break; + } +} + +static void _osd_enable_color_key(struct osd_state *sd, + enum osd_win_layer osdwin, + unsigned colorkey, + enum osd_pix_format pixfmt) +{ + switch (pixfmt) { + case PIXFMT_1BPP: + case PIXFMT_2BPP: + case PIXFMT_4BPP: + case PIXFMT_8BPP: + if (sd->vpbe_type == VPBE_VERSION_3) { + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_TRANSPBMPIDX_BMP0, + colorkey << + OSD_TRANSPBMPIDX_BMP0_SHIFT, + OSD_TRANSPBMPIDX); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_TRANSPBMPIDX_BMP1, + colorkey << + OSD_TRANSPBMPIDX_BMP1_SHIFT, + OSD_TRANSPBMPIDX); + break; + } + } + break; + case PIXFMT_RGB565: + if (sd->vpbe_type == VPBE_VERSION_1) + osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS, + OSD_TRANSPVAL); + else if (sd->vpbe_type == VPBE_VERSION_3) + osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL, + OSD_TRANSPVALL); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + if (sd->vpbe_type == VPBE_VERSION_3) + osd_modify(sd, OSD_TRANSPVALU_Y, colorkey, + OSD_TRANSPVALU); + break; + case PIXFMT_RGB888: + if (sd->vpbe_type == VPBE_VERSION_3) { + osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL, + OSD_TRANSPVALL); + osd_modify(sd, OSD_TRANSPVALU_RGBU, colorkey >> 16, + OSD_TRANSPVALU); + } + break; + default: + break; + } + + switch (osdwin) { + case OSDWIN_OSD0: + osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_disable_color_key(struct osd_state *sd, + enum osd_win_layer osdwin) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_set_osd_clut(struct osd_state *sd, + enum osd_win_layer osdwin, + enum osd_clut clut) +{ + u32 winmd = 0; + + switch (osdwin) { + case OSDWIN_OSD0: + if (clut == RAM_CLUT) + winmd |= OSD_OSDWIN0MD_CLUTS0; + osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + if (clut == RAM_CLUT) + winmd |= OSD_OSDWIN1MD_CLUTS1; + osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer, + enum osd_zoom_factor h_zoom, + enum osd_zoom_factor v_zoom) +{ + u32 winmd = 0; + + switch (layer) { + case WIN_OSD0: + winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT); + winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT); + osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd, + OSD_OSDWIN0MD); + break; + case WIN_VID0: + winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT); + winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT); + osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd, + OSD_VIDWINMD); + break; + case WIN_OSD1: + winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT); + winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT); + osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd, + OSD_OSDWIN1MD); + break; + case WIN_VID1: + winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT); + winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT); + osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd, + OSD_VIDWINMD); + break; + } +} + +static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer) +{ + switch (layer) { + case WIN_OSD0: + osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD); + break; + case WIN_VID0: + osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD); + break; + case WIN_OSD1: + /* disable attribute mode as well as disabling the window */ + osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1, + OSD_OSDWIN1MD); + break; + case WIN_VID1: + osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD); + break; + } +} + +static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (!win->is_enabled) { + spin_unlock_irqrestore(&osd->lock, flags); + return; + } + win->is_enabled = 0; + + _osd_disable_layer(sd, layer); + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void _osd_enable_attribute_mode(struct osd_state *sd) +{ + /* enable attribute mode for OSD1 */ + osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD); +} + +static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer) +{ + switch (layer) { + case WIN_OSD0: + osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD); + break; + case WIN_VID0: + osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD); + break; + case WIN_OSD1: + /* enable OSD1 and disable attribute mode */ + osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1, + OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD); + break; + case WIN_VID1: + osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD); + break; + } +} + +static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer, + int otherwin) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + /* + * use otherwin flag to know this is the other vid window + * in YUV420 mode, if is, skip this check + */ + if (!otherwin && (!win->is_allocated || + !win->fb_base_phys || + !cfg->line_length || + !cfg->xsize || + !cfg->ysize)) { + spin_unlock_irqrestore(&osd->lock, flags); + return -1; + } + + if (win->is_enabled) { + spin_unlock_irqrestore(&osd->lock, flags); + return 0; + } + win->is_enabled = 1; + + if (cfg->pixfmt != PIXFMT_OSD_ATTR) + _osd_enable_layer(sd, layer); + else { + _osd_enable_attribute_mode(sd); + _osd_set_blink_attribute(sd, osd->is_blinking, osd->blink); + } + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +#define OSD_SRC_ADDR_HIGH4 0x7800000 +#define OSD_SRC_ADDR_HIGH7 0x7F0000 +#define OSD_SRCADD_OFSET_SFT 23 +#define OSD_SRCADD_ADD_SFT 16 +#define OSD_WINADL_MASK 0xFFFF +#define OSD_WINOFST_MASK 0x1000 +#define VPBE_REG_BASE 0x80000000 + +static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst) +{ + + if (sd->vpbe_type == VPBE_VERSION_1) { + switch (layer) { + case WIN_OSD0: + osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR); + break; + case WIN_VID0: + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR); + break; + case WIN_OSD1: + osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR); + break; + case WIN_VID1: + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR); + break; + } + } else if (sd->vpbe_type == VPBE_VERSION_3) { + unsigned long fb_offset_32 = + (fb_base_phys - VPBE_REG_BASE) >> 5; + + switch (layer) { + case WIN_OSD0: + osd_modify(sd, OSD_OSDWINADH_O0AH, + fb_offset_32 >> (OSD_SRCADD_ADD_SFT - + OSD_OSDWINADH_O0AH_SHIFT), + OSD_OSDWINADH); + osd_write(sd, fb_offset_32 & OSD_OSDWIN0ADL_O0AL, + OSD_OSDWIN0ADL); + break; + case WIN_VID0: + osd_modify(sd, OSD_VIDWINADH_V0AH, + fb_offset_32 >> (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V0AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_VIDWIN0ADL_V0AL, + OSD_VIDWIN0ADL); + break; + case WIN_OSD1: + osd_modify(sd, OSD_OSDWINADH_O1AH, + fb_offset_32 >> (OSD_SRCADD_ADD_SFT - + OSD_OSDWINADH_O1AH_SHIFT), + OSD_OSDWINADH); + osd_write(sd, fb_offset_32 & OSD_OSDWIN1ADL_O1AL, + OSD_OSDWIN1ADL); + break; + case WIN_VID1: + osd_modify(sd, OSD_VIDWINADH_V1AH, + fb_offset_32 >> (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V1AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_VIDWIN1ADL_V1AL, + OSD_VIDWIN1ADL); + break; + } + } else if (sd->vpbe_type == VPBE_VERSION_2) { + struct osd_window_state *win = &sd->win[layer]; + unsigned long fb_offset_32, cbcr_offset_32; + + fb_offset_32 = fb_base_phys - VPBE_REG_BASE; + if (cbcr_ofst) + cbcr_offset_32 = cbcr_ofst; + else + cbcr_offset_32 = win->lconfig.line_length * + win->lconfig.ysize; + cbcr_offset_32 += fb_offset_32; + fb_offset_32 = fb_offset_32 >> 5; + cbcr_offset_32 = cbcr_offset_32 >> 5; + /* + * DM365: start address is 27-bit long address b26 - b23 are + * in offset register b12 - b9, and * bit 26 has to be '1' + */ + if (win->lconfig.pixfmt == PIXFMT_NV12) { + switch (layer) { + case WIN_VID0: + case WIN_VID1: + /* Y is in VID0 */ + osd_modify(sd, OSD_VIDWIN0OFST_V0AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | + OSD_WINOFST_MASK, OSD_VIDWIN0OFST); + osd_modify(sd, OSD_VIDWINADH_V0AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V0AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_VIDWIN0ADL); + /* CbCr is in VID1 */ + osd_modify(sd, OSD_VIDWIN1OFST_V1AH, + ((cbcr_offset_32 & + OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | + OSD_WINOFST_MASK, OSD_VIDWIN1OFST); + osd_modify(sd, OSD_VIDWINADH_V1AH, + (cbcr_offset_32 & + OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V1AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, cbcr_offset_32 & OSD_WINADL_MASK, + OSD_VIDWIN1ADL); + break; + default: + break; + } + } + + switch (layer) { + case WIN_OSD0: + osd_modify(sd, OSD_OSDWIN0OFST_O0AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK, + OSD_OSDWIN0OFST); + osd_modify(sd, OSD_OSDWINADH_O0AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_OSDWINADH_O0AH_SHIFT), OSD_OSDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_OSDWIN0ADL); + break; + case WIN_VID0: + if (win->lconfig.pixfmt != PIXFMT_NV12) { + osd_modify(sd, OSD_VIDWIN0OFST_V0AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | + OSD_WINOFST_MASK, OSD_VIDWIN0OFST); + osd_modify(sd, OSD_VIDWINADH_V0AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V0AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_VIDWIN0ADL); + } + break; + case WIN_OSD1: + osd_modify(sd, OSD_OSDWIN1OFST_O1AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK, + OSD_OSDWIN1OFST); + osd_modify(sd, OSD_OSDWINADH_O1AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_OSDWINADH_O1AH_SHIFT), + OSD_OSDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_OSDWIN1ADL); + break; + case WIN_VID1: + if (win->lconfig.pixfmt != PIXFMT_NV12) { + osd_modify(sd, OSD_VIDWIN1OFST_V1AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | + OSD_WINOFST_MASK, OSD_VIDWIN1OFST); + osd_modify(sd, OSD_VIDWINADH_V1AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V1AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_VIDWIN1ADL); + } + break; + } + } +} + +static void osd_start_layer(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + win->fb_base_phys = fb_base_phys & ~0x1F; + _osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst); + + if (layer == WIN_VID0) { + osd->pingpong = + _osd_dm6446_vid0_pingpong(sd, osd->field_inversion, + win->fb_base_phys, + cfg); + } + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + *lconfig = win->lconfig; + + spin_unlock_irqrestore(&osd->lock, flags); +} + +/** + * try_layer_config() - Try a specific configuration for the layer + * @sd - ptr to struct osd_state + * @layer - layer to configure + * @lconfig - layer configuration to try + * + * If the requested lconfig is completely rejected and the value of lconfig on + * exit is the current lconfig, then try_layer_config() returns 1. Otherwise, + * try_layer_config() returns 0. A return value of 0 does not necessarily mean + * that the value of lconfig on exit is identical to the value of lconfig on + * entry, but merely that it represents a change from the current lconfig. + */ +static int try_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + int bad_config = 0; + + /* verify that the pixel format is compatible with the layer */ + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + case PIXFMT_2BPP: + case PIXFMT_4BPP: + case PIXFMT_8BPP: + case PIXFMT_RGB565: + if (osd->vpbe_type == VPBE_VERSION_1) + bad_config = !is_vid_win(layer); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + bad_config = !is_vid_win(layer); + break; + case PIXFMT_RGB888: + if (osd->vpbe_type == VPBE_VERSION_1) + bad_config = !is_vid_win(layer); + else if ((osd->vpbe_type == VPBE_VERSION_3) || + (osd->vpbe_type == VPBE_VERSION_2)) + bad_config = !is_osd_win(layer); + break; + case PIXFMT_NV12: + if (osd->vpbe_type != VPBE_VERSION_2) + bad_config = 1; + else + bad_config = is_osd_win(layer); + break; + case PIXFMT_OSD_ATTR: + bad_config = (layer != WIN_OSD1); + break; + default: + bad_config = 1; + break; + } + if (bad_config) { + /* + * The requested pixel format is incompatible with the layer, + * so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return bad_config; + } + + /* DM6446: */ + /* only one OSD window at a time can use RGB pixel formats */ + if ((osd->vpbe_type == VPBE_VERSION_1) && + is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) { + enum osd_pix_format pixfmt; + if (layer == WIN_OSD0) + pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt; + else + pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt; + + if (is_rgb_pixfmt(pixfmt)) { + /* + * The other OSD window is already configured for an + * RGB, so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return 1; + } + } + + /* DM6446: only one video window at a time can use RGB888 */ + if ((osd->vpbe_type == VPBE_VERSION_1) && is_vid_win(layer) && + lconfig->pixfmt == PIXFMT_RGB888) { + enum osd_pix_format pixfmt; + + if (layer == WIN_VID0) + pixfmt = osd->win[WIN_VID1].lconfig.pixfmt; + else + pixfmt = osd->win[WIN_VID0].lconfig.pixfmt; + + if (pixfmt == PIXFMT_RGB888) { + /* + * The other video window is already configured for + * RGB888, so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return 1; + } + } + + /* window dimensions must be non-zero */ + if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) { + *lconfig = win->lconfig; + return 1; + } + + /* round line_length up to a multiple of 32 */ + lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32; + lconfig->line_length = + min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH); + lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE); + lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE); + lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE); + lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE); + lconfig->interlaced = (lconfig->interlaced != 0); + if (lconfig->interlaced) { + /* ysize and ypos must be even for interlaced displays */ + lconfig->ysize &= ~1; + lconfig->ypos &= ~1; + } + + return 0; +} + +static void _osd_disable_vid_rgb888(struct osd_state *sd) +{ + /* + * The DM6446 supports RGB888 pixel format in a single video window. + * This routine disables RGB888 pixel format for both video windows. + * The caller must ensure that neither video window is currently + * configured for RGB888 pixel format. + */ + if (sd->vpbe_type == VPBE_VERSION_1) + osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL); +} + +static void _osd_enable_vid_rgb888(struct osd_state *sd, + enum osd_layer layer) +{ + /* + * The DM6446 supports RGB888 pixel format in a single video window. + * This routine enables RGB888 pixel format for the specified video + * window. The caller must ensure that the other video window is not + * currently configured for RGB888 pixel format, as this routine will + * disable RGB888 pixel format for the other window. + */ + if (sd->vpbe_type == VPBE_VERSION_1) { + if (layer == WIN_VID0) + osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL_RGBEN, OSD_MISCCTL); + else if (layer == WIN_VID1) + osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL); + } +} + +static void _osd_set_cbcr_order(struct osd_state *sd, + enum osd_pix_format pixfmt) +{ + /* + * The caller must ensure that all windows using YC pixfmt use the same + * Cb/Cr order. + */ + if (pixfmt == PIXFMT_YCbCrI) + osd_clear(sd, OSD_MODE_CS, OSD_MODE); + else if (pixfmt == PIXFMT_YCrCbI) + osd_set(sd, OSD_MODE_CS, OSD_MODE); +} + +static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer, + const struct osd_layer_config *lconfig) +{ + u32 winmd = 0, winmd_mask = 0, bmw = 0; + + _osd_set_cbcr_order(sd, lconfig->pixfmt); + + switch (layer) { + case WIN_OSD0: + if (sd->vpbe_type == VPBE_VERSION_1) { + winmd_mask |= OSD_OSDWIN0MD_RGB0E; + if (lconfig->pixfmt == PIXFMT_RGB565) + winmd |= OSD_OSDWIN0MD_RGB0E; + } else if ((sd->vpbe_type == VPBE_VERSION_3) || + (sd->vpbe_type == VPBE_VERSION_2)) { + winmd_mask |= OSD_OSDWIN0MD_BMP0MD; + switch (lconfig->pixfmt) { + case PIXFMT_RGB565: + winmd |= (1 << + OSD_OSDWIN0MD_BMP0MD_SHIFT); + break; + case PIXFMT_RGB888: + winmd |= (2 << OSD_OSDWIN0MD_BMP0MD_SHIFT); + _osd_enable_rgb888_pixblend(sd, OSDWIN_OSD0); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + winmd |= (3 << OSD_OSDWIN0MD_BMP0MD_SHIFT); + break; + default: + break; + } + } + + winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0; + + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + bmw = 0; + break; + case PIXFMT_2BPP: + bmw = 1; + break; + case PIXFMT_4BPP: + bmw = 2; + break; + case PIXFMT_8BPP: + bmw = 3; + break; + default: + break; + } + winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT); + + if (lconfig->interlaced) + winmd |= OSD_OSDWIN0MD_OFF0; + + osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD); + osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST); + osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP); + osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL); + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP); + osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL); + } else { + osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP); + osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL); + } + break; + case WIN_VID0: + winmd_mask |= OSD_VIDWINMD_VFF0; + if (lconfig->interlaced) + winmd |= OSD_VIDWINMD_VFF0; + + osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD); + osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL); + /* + * For YUV420P format the register contents are + * duplicated in both VID registers + */ + if ((sd->vpbe_type == VPBE_VERSION_2) && + (lconfig->pixfmt == PIXFMT_NV12)) { + /* other window also */ + if (lconfig->interlaced) { + winmd_mask |= OSD_VIDWINMD_VFF1; + winmd |= OSD_VIDWINMD_VFF1; + osd_modify(sd, winmd_mask, winmd, + OSD_VIDWINMD); + } + + osd_modify(sd, OSD_MISCCTL_S420D, + OSD_MISCCTL_S420D, OSD_MISCCTL); + osd_write(sd, lconfig->line_length >> 5, + OSD_VIDWIN1OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL); + /* + * if NV21 pixfmt and line length not 32B + * aligned (e.g. NTSC), Need to set window + * X pixel size to be 32B aligned as well + */ + if (lconfig->xsize % 32) { + osd_write(sd, + ((lconfig->xsize + 31) & ~31), + OSD_VIDWIN1XL); + osd_write(sd, + ((lconfig->xsize + 31) & ~31), + OSD_VIDWIN0XL); + } + } else if ((sd->vpbe_type == VPBE_VERSION_2) && + (lconfig->pixfmt != PIXFMT_NV12)) { + osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D, + OSD_MISCCTL); + } + + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL); + if ((sd->vpbe_type == VPBE_VERSION_2) && + lconfig->pixfmt == PIXFMT_NV12) { + osd_write(sd, lconfig->ypos >> 1, + OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize >> 1, + OSD_VIDWIN1YL); + } + } else { + osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL); + if ((sd->vpbe_type == VPBE_VERSION_2) && + lconfig->pixfmt == PIXFMT_NV12) { + osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL); + } + } + break; + case WIN_OSD1: + /* + * The caller must ensure that OSD1 is disabled prior to + * switching from a normal mode to attribute mode or from + * attribute mode to a normal mode. + */ + if (lconfig->pixfmt == PIXFMT_OSD_ATTR) { + if (sd->vpbe_type == VPBE_VERSION_1) { + winmd_mask |= OSD_OSDWIN1MD_ATN1E | + OSD_OSDWIN1MD_RGB1E | OSD_OSDWIN1MD_CLUTS1 | + OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1; + } else { + winmd_mask |= OSD_OSDWIN1MD_BMP1MD | + OSD_OSDWIN1MD_CLUTS1 | OSD_OSDWIN1MD_BLND1 | + OSD_OSDWIN1MD_TE1; + } + } else { + if (sd->vpbe_type == VPBE_VERSION_1) { + winmd_mask |= OSD_OSDWIN1MD_RGB1E; + if (lconfig->pixfmt == PIXFMT_RGB565) + winmd |= OSD_OSDWIN1MD_RGB1E; + } else if ((sd->vpbe_type == VPBE_VERSION_3) + || (sd->vpbe_type == VPBE_VERSION_2)) { + winmd_mask |= OSD_OSDWIN1MD_BMP1MD; + switch (lconfig->pixfmt) { + case PIXFMT_RGB565: + winmd |= + (1 << OSD_OSDWIN1MD_BMP1MD_SHIFT); + break; + case PIXFMT_RGB888: + winmd |= + (2 << OSD_OSDWIN1MD_BMP1MD_SHIFT); + _osd_enable_rgb888_pixblend(sd, + OSDWIN_OSD1); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + winmd |= + (3 << OSD_OSDWIN1MD_BMP1MD_SHIFT); + break; + default: + break; + } + } + + winmd_mask |= OSD_OSDWIN1MD_BMW1; + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + bmw = 0; + break; + case PIXFMT_2BPP: + bmw = 1; + break; + case PIXFMT_4BPP: + bmw = 2; + break; + case PIXFMT_8BPP: + bmw = 3; + break; + default: + break; + } + winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT); + } + + winmd_mask |= OSD_OSDWIN1MD_OFF1; + if (lconfig->interlaced) + winmd |= OSD_OSDWIN1MD_OFF1; + + osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD); + osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST); + osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP); + osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL); + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP); + osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL); + } else { + osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP); + osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL); + } + break; + case WIN_VID1: + winmd_mask |= OSD_VIDWINMD_VFF1; + if (lconfig->interlaced) + winmd |= OSD_VIDWINMD_VFF1; + + osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD); + osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL); + /* + * For YUV420P format the register contents are + * duplicated in both VID registers + */ + if (sd->vpbe_type == VPBE_VERSION_2) { + if (lconfig->pixfmt == PIXFMT_NV12) { + /* other window also */ + if (lconfig->interlaced) { + winmd_mask |= OSD_VIDWINMD_VFF0; + winmd |= OSD_VIDWINMD_VFF0; + osd_modify(sd, winmd_mask, winmd, + OSD_VIDWINMD); + } + osd_modify(sd, OSD_MISCCTL_S420D, + OSD_MISCCTL_S420D, OSD_MISCCTL); + osd_write(sd, lconfig->line_length >> 5, + OSD_VIDWIN0OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL); + } else { + osd_modify(sd, OSD_MISCCTL_S420D, + ~OSD_MISCCTL_S420D, OSD_MISCCTL); + } + } + + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL); + if ((sd->vpbe_type == VPBE_VERSION_2) && + lconfig->pixfmt == PIXFMT_NV12) { + osd_write(sd, lconfig->ypos >> 1, + OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize >> 1, + OSD_VIDWIN0YL); + } + } else { + osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL); + if ((sd->vpbe_type == VPBE_VERSION_2) && + lconfig->pixfmt == PIXFMT_NV12) { + osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL); + } + } + break; + } +} + +static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + int reject_config; + + spin_lock_irqsave(&osd->lock, flags); + + reject_config = try_layer_config(sd, layer, lconfig); + if (reject_config) { + spin_unlock_irqrestore(&osd->lock, flags); + return reject_config; + } + + /* update the current Cb/Cr order */ + if (is_yc_pixfmt(lconfig->pixfmt)) + osd->yc_pixfmt = lconfig->pixfmt; + + /* + * If we are switching OSD1 from normal mode to attribute mode or from + * attribute mode to normal mode, then we must disable the window. + */ + if (layer == WIN_OSD1) { + if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) && + (cfg->pixfmt != PIXFMT_OSD_ATTR)) || + ((lconfig->pixfmt != PIXFMT_OSD_ATTR) && + (cfg->pixfmt == PIXFMT_OSD_ATTR))) { + win->is_enabled = 0; + _osd_disable_layer(sd, layer); + } + } + + _osd_set_layer_config(sd, layer, lconfig); + + if (layer == WIN_OSD1) { + struct osd_osdwin_state *osdwin_state = + &osd->osdwin[OSDWIN_OSD1]; + + if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) && + (cfg->pixfmt == PIXFMT_OSD_ATTR)) { + /* + * We just switched OSD1 from attribute mode to normal + * mode, so we must initialize the CLUT select, the + * blend factor, transparency colorkey enable, and + * attenuation enable (DM6446 only) bits in the + * OSDWIN1MD register. + */ + _osd_set_osd_clut(sd, OSDWIN_OSD1, + osdwin_state->clut); + _osd_set_blending_factor(sd, OSDWIN_OSD1, + osdwin_state->blend); + if (osdwin_state->colorkey_blending) { + _osd_enable_color_key(sd, OSDWIN_OSD1, + osdwin_state-> + colorkey, + lconfig->pixfmt); + } else + _osd_disable_color_key(sd, OSDWIN_OSD1); + _osd_set_rec601_attenuation(sd, OSDWIN_OSD1, + osdwin_state-> + rec601_attenuation); + } else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) && + (cfg->pixfmt != PIXFMT_OSD_ATTR)) { + /* + * We just switched OSD1 from normal mode to attribute + * mode, so we must initialize the blink enable and + * blink interval bits in the OSDATRMD register. + */ + _osd_set_blink_attribute(sd, osd->is_blinking, + osd->blink); + } + } + + /* + * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format + * then configure a default palette map. + */ + if ((lconfig->pixfmt != cfg->pixfmt) && + ((lconfig->pixfmt == PIXFMT_1BPP) || + (lconfig->pixfmt == PIXFMT_2BPP) || + (lconfig->pixfmt == PIXFMT_4BPP))) { + enum osd_win_layer osdwin = + ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1); + struct osd_osdwin_state *osdwin_state = + &osd->osdwin[osdwin]; + unsigned char clut_index; + unsigned char clut_entries = 0; + + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + clut_entries = 2; + break; + case PIXFMT_2BPP: + clut_entries = 4; + break; + case PIXFMT_4BPP: + clut_entries = 16; + break; + default: + break; + } + /* + * The default palette map maps the pixel value to the clut + * index, i.e. pixel value 0 maps to clut entry 0, pixel value + * 1 maps to clut entry 1, etc. + */ + for (clut_index = 0; clut_index < 16; clut_index++) { + osdwin_state->palette_map[clut_index] = clut_index; + if (clut_index < clut_entries) { + _osd_set_palette_map(sd, osdwin, clut_index, + clut_index, + lconfig->pixfmt); + } + } + } + + *cfg = *lconfig; + /* DM6446: configure the RGB888 enable and window selection */ + if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888) + _osd_enable_vid_rgb888(sd, WIN_VID0); + else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888) + _osd_enable_vid_rgb888(sd, WIN_VID1); + else + _osd_disable_vid_rgb888(sd); + + if (layer == WIN_VID0) { + osd->pingpong = + _osd_dm6446_vid0_pingpong(sd, osd->field_inversion, + win->fb_base_phys, + cfg); + } + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +static void osd_init_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + enum osd_win_layer osdwin; + struct osd_osdwin_state *osdwin_state; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + win->is_enabled = 0; + _osd_disable_layer(sd, layer); + + win->h_zoom = ZOOM_X1; + win->v_zoom = ZOOM_X1; + _osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom); + + win->fb_base_phys = 0; + _osd_start_layer(sd, layer, win->fb_base_phys, 0); + + cfg->line_length = 0; + cfg->xsize = 0; + cfg->ysize = 0; + cfg->xpos = 0; + cfg->ypos = 0; + cfg->interlaced = 0; + switch (layer) { + case WIN_OSD0: + case WIN_OSD1: + osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1; + osdwin_state = &osd->osdwin[osdwin]; + /* + * Other code relies on the fact that OSD windows default to a + * bitmap pixel format when they are deallocated, so don't + * change this default pixel format. + */ + cfg->pixfmt = PIXFMT_8BPP; + _osd_set_layer_config(sd, layer, cfg); + osdwin_state->clut = RAM_CLUT; + _osd_set_osd_clut(sd, osdwin, osdwin_state->clut); + osdwin_state->colorkey_blending = 0; + _osd_disable_color_key(sd, osdwin); + osdwin_state->blend = OSD_8_VID_0; + _osd_set_blending_factor(sd, osdwin, osdwin_state->blend); + osdwin_state->rec601_attenuation = 0; + _osd_set_rec601_attenuation(sd, osdwin, + osdwin_state-> + rec601_attenuation); + if (osdwin == OSDWIN_OSD1) { + osd->is_blinking = 0; + osd->blink = BLINK_X1; + } + break; + case WIN_VID0: + case WIN_VID1: + cfg->pixfmt = osd->yc_pixfmt; + _osd_set_layer_config(sd, layer, cfg); + break; + } + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void osd_release_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (!win->is_allocated) { + spin_unlock_irqrestore(&osd->lock, flags); + return; + } + + spin_unlock_irqrestore(&osd->lock, flags); + osd_init_layer(sd, layer); + spin_lock_irqsave(&osd->lock, flags); + + win->is_allocated = 0; + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static int osd_request_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (win->is_allocated) { + spin_unlock_irqrestore(&osd->lock, flags); + return -1; + } + win->is_allocated = 1; + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +static void _osd_init(struct osd_state *sd) +{ + osd_write(sd, 0, OSD_MODE); + osd_write(sd, 0, OSD_VIDWINMD); + osd_write(sd, 0, OSD_OSDWIN0MD); + osd_write(sd, 0, OSD_OSDWIN1MD); + osd_write(sd, 0, OSD_RECTCUR); + osd_write(sd, 0, OSD_MISCCTL); + if (sd->vpbe_type == VPBE_VERSION_3) { + osd_write(sd, 0, OSD_VBNDRY); + osd_write(sd, 0, OSD_EXTMODE); + osd_write(sd, OSD_MISCCTL_DMANG, OSD_MISCCTL); + } +} + +static void osd_set_left_margin(struct osd_state *sd, u32 val) +{ + osd_write(sd, val, OSD_BASEPX); +} + +static void osd_set_top_margin(struct osd_state *sd, u32 val) +{ + osd_write(sd, val, OSD_BASEPY); +} + +static int osd_initialize(struct osd_state *osd) +{ + if (osd == NULL) + return -ENODEV; + _osd_init(osd); + + /* set default Cb/Cr order */ + osd->yc_pixfmt = PIXFMT_YCbCrI; + + if (osd->vpbe_type == VPBE_VERSION_3) { + /* + * ROM CLUT1 on the DM355 is similar (identical?) to ROM CLUT0 + * on the DM6446, so make ROM_CLUT1 the default on the DM355. + */ + osd->rom_clut = ROM_CLUT1; + } + + _osd_set_field_inversion(osd, osd->field_inversion); + _osd_set_rom_clut(osd, osd->rom_clut); + + osd_init_layer(osd, WIN_OSD0); + osd_init_layer(osd, WIN_VID0); + osd_init_layer(osd, WIN_OSD1); + osd_init_layer(osd, WIN_VID1); + + return 0; +} + +static const struct vpbe_osd_ops osd_ops = { + .initialize = osd_initialize, + .request_layer = osd_request_layer, + .release_layer = osd_release_layer, + .enable_layer = osd_enable_layer, + .disable_layer = osd_disable_layer, + .set_layer_config = osd_set_layer_config, + .get_layer_config = osd_get_layer_config, + .start_layer = osd_start_layer, + .set_left_margin = osd_set_left_margin, + .set_top_margin = osd_set_top_margin, +}; + +static int osd_probe(struct platform_device *pdev) +{ + const struct platform_device_id *pdev_id; + struct osd_state *osd; + struct resource *res; + int ret = 0; + + osd = kzalloc(sizeof(struct osd_state), GFP_KERNEL); + if (osd == NULL) + return -ENOMEM; + + pdev_id = platform_get_device_id(pdev); + if (!pdev_id) { + ret = -EINVAL; + goto free_mem; + } + + osd->dev = &pdev->dev; + osd->vpbe_type = pdev_id->driver_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(osd->dev, "Unable to get OSD register address map\n"); + ret = -ENODEV; + goto free_mem; + } + osd->osd_base_phys = res->start; + osd->osd_size = resource_size(res); + if (!request_mem_region(osd->osd_base_phys, osd->osd_size, + MODULE_NAME)) { + dev_err(osd->dev, "Unable to reserve OSD MMIO region\n"); + ret = -ENODEV; + goto free_mem; + } + osd->osd_base = ioremap_nocache(res->start, osd->osd_size); + if (!osd->osd_base) { + dev_err(osd->dev, "Unable to map the OSD region\n"); + ret = -ENODEV; + goto release_mem_region; + } + spin_lock_init(&osd->lock); + osd->ops = osd_ops; + platform_set_drvdata(pdev, osd); + dev_notice(osd->dev, "OSD sub device probe success\n"); + return ret; + +release_mem_region: + release_mem_region(osd->osd_base_phys, osd->osd_size); +free_mem: + kfree(osd); + return ret; +} + +static int osd_remove(struct platform_device *pdev) +{ + struct osd_state *osd = platform_get_drvdata(pdev); + + iounmap((void *)osd->osd_base); + release_mem_region(osd->osd_base_phys, osd->osd_size); + kfree(osd); + return 0; +} + +static struct platform_driver osd_driver = { + .probe = osd_probe, + .remove = osd_remove, + .driver = { + .name = MODULE_NAME, + .owner = THIS_MODULE, + }, + .id_table = vpbe_osd_devtype +}; + +module_platform_driver(osd_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DaVinci OSD Manager Driver"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/davinci/vpbe_osd_regs.h b/drivers/media/platform/davinci/vpbe_osd_regs.h new file mode 100644 index 00000000..584520f3 --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_osd_regs.h @@ -0,0 +1,364 @@ +/* + * Copyright (C) 2006-2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_OSD_REGS_H +#define _VPBE_OSD_REGS_H + +/* VPBE Global Registers */ +#define VPBE_PID 0x0 +#define VPBE_PCR 0x4 + +/* VPSS CLock Registers */ +#define VPSSCLK_PID 0x00 +#define VPSSCLK_CLKCTRL 0x04 + +/* VPSS Buffer Logic Registers */ +#define VPSSBL_PID 0x00 +#define VPSSBL_PCR 0x04 +#define VPSSBL_BCR 0x08 +#define VPSSBL_INTSTAT 0x0C +#define VPSSBL_INTSEL 0x10 +#define VPSSBL_EVTSEL 0x14 +#define VPSSBL_MEMCTRL 0x18 +#define VPSSBL_CCDCMUX 0x1C + +/* DM365 ISP5 system configuration */ +#define ISP5_PID 0x0 +#define ISP5_PCCR 0x4 +#define ISP5_BCR 0x8 +#define ISP5_INTSTAT 0xC +#define ISP5_INTSEL1 0x10 +#define ISP5_INTSEL2 0x14 +#define ISP5_INTSEL3 0x18 +#define ISP5_EVTSEL 0x1c +#define ISP5_CCDCMUX 0x20 + +/* VPBE On-Screen Display Subsystem Registers (OSD) */ +#define OSD_MODE 0x00 +#define OSD_VIDWINMD 0x04 +#define OSD_OSDWIN0MD 0x08 +#define OSD_OSDWIN1MD 0x0C +#define OSD_OSDATRMD 0x0C +#define OSD_RECTCUR 0x10 +#define OSD_VIDWIN0OFST 0x18 +#define OSD_VIDWIN1OFST 0x1C +#define OSD_OSDWIN0OFST 0x20 +#define OSD_OSDWIN1OFST 0x24 +#define OSD_VIDWINADH 0x28 +#define OSD_VIDWIN0ADL 0x2C +#define OSD_VIDWIN0ADR 0x2C +#define OSD_VIDWIN1ADL 0x30 +#define OSD_VIDWIN1ADR 0x30 +#define OSD_OSDWINADH 0x34 +#define OSD_OSDWIN0ADL 0x38 +#define OSD_OSDWIN0ADR 0x38 +#define OSD_OSDWIN1ADL 0x3C +#define OSD_OSDWIN1ADR 0x3C +#define OSD_BASEPX 0x40 +#define OSD_BASEPY 0x44 +#define OSD_VIDWIN0XP 0x48 +#define OSD_VIDWIN0YP 0x4C +#define OSD_VIDWIN0XL 0x50 +#define OSD_VIDWIN0YL 0x54 +#define OSD_VIDWIN1XP 0x58 +#define OSD_VIDWIN1YP 0x5C +#define OSD_VIDWIN1XL 0x60 +#define OSD_VIDWIN1YL 0x64 +#define OSD_OSDWIN0XP 0x68 +#define OSD_OSDWIN0YP 0x6C +#define OSD_OSDWIN0XL 0x70 +#define OSD_OSDWIN0YL 0x74 +#define OSD_OSDWIN1XP 0x78 +#define OSD_OSDWIN1YP 0x7C +#define OSD_OSDWIN1XL 0x80 +#define OSD_OSDWIN1YL 0x84 +#define OSD_CURXP 0x88 +#define OSD_CURYP 0x8C +#define OSD_CURXL 0x90 +#define OSD_CURYL 0x94 +#define OSD_W0BMP01 0xA0 +#define OSD_W0BMP23 0xA4 +#define OSD_W0BMP45 0xA8 +#define OSD_W0BMP67 0xAC +#define OSD_W0BMP89 0xB0 +#define OSD_W0BMPAB 0xB4 +#define OSD_W0BMPCD 0xB8 +#define OSD_W0BMPEF 0xBC +#define OSD_W1BMP01 0xC0 +#define OSD_W1BMP23 0xC4 +#define OSD_W1BMP45 0xC8 +#define OSD_W1BMP67 0xCC +#define OSD_W1BMP89 0xD0 +#define OSD_W1BMPAB 0xD4 +#define OSD_W1BMPCD 0xD8 +#define OSD_W1BMPEF 0xDC +#define OSD_VBNDRY 0xE0 +#define OSD_EXTMODE 0xE4 +#define OSD_MISCCTL 0xE8 +#define OSD_CLUTRAMYCB 0xEC +#define OSD_CLUTRAMCR 0xF0 +#define OSD_TRANSPVAL 0xF4 +#define OSD_TRANSPVALL 0xF4 +#define OSD_TRANSPVALU 0xF8 +#define OSD_TRANSPBMPIDX 0xFC +#define OSD_PPVWIN0ADR 0xFC + +/* bit definitions */ +#define VPBE_PCR_VENC_DIV (1 << 1) +#define VPBE_PCR_CLK_OFF (1 << 0) + +#define VPSSBL_INTSTAT_HSSIINT (1 << 14) +#define VPSSBL_INTSTAT_CFALDINT (1 << 13) +#define VPSSBL_INTSTAT_IPIPE_INT5 (1 << 12) +#define VPSSBL_INTSTAT_IPIPE_INT4 (1 << 11) +#define VPSSBL_INTSTAT_IPIPE_INT3 (1 << 10) +#define VPSSBL_INTSTAT_IPIPE_INT2 (1 << 9) +#define VPSSBL_INTSTAT_IPIPE_INT1 (1 << 8) +#define VPSSBL_INTSTAT_IPIPE_INT0 (1 << 7) +#define VPSSBL_INTSTAT_IPIPEIFINT (1 << 6) +#define VPSSBL_INTSTAT_OSDINT (1 << 5) +#define VPSSBL_INTSTAT_VENCINT (1 << 4) +#define VPSSBL_INTSTAT_H3AINT (1 << 3) +#define VPSSBL_INTSTAT_CCDC_VDINT2 (1 << 2) +#define VPSSBL_INTSTAT_CCDC_VDINT1 (1 << 1) +#define VPSSBL_INTSTAT_CCDC_VDINT0 (1 << 0) + +/* DM365 ISP5 bit definitions */ +#define ISP5_INTSTAT_VENCINT (1 << 21) +#define ISP5_INTSTAT_OSDINT (1 << 20) + +/* VMOD TVTYP options for HDMD=0 */ +#define SDTV_NTSC 0 +#define SDTV_PAL 1 +/* VMOD TVTYP options for HDMD=1 */ +#define HDTV_525P 0 +#define HDTV_625P 1 +#define HDTV_1080I 2 +#define HDTV_720P 3 + +#define OSD_MODE_CS (1 << 15) +#define OSD_MODE_OVRSZ (1 << 14) +#define OSD_MODE_OHRSZ (1 << 13) +#define OSD_MODE_EF (1 << 12) +#define OSD_MODE_VVRSZ (1 << 11) +#define OSD_MODE_VHRSZ (1 << 10) +#define OSD_MODE_FSINV (1 << 9) +#define OSD_MODE_BCLUT (1 << 8) +#define OSD_MODE_CABG_SHIFT 0 +#define OSD_MODE_CABG (0xff << 0) + +#define OSD_VIDWINMD_VFINV (1 << 15) +#define OSD_VIDWINMD_V1EFC (1 << 14) +#define OSD_VIDWINMD_VHZ1_SHIFT 12 +#define OSD_VIDWINMD_VHZ1 (3 << 12) +#define OSD_VIDWINMD_VVZ1_SHIFT 10 +#define OSD_VIDWINMD_VVZ1 (3 << 10) +#define OSD_VIDWINMD_VFF1 (1 << 9) +#define OSD_VIDWINMD_ACT1 (1 << 8) +#define OSD_VIDWINMD_V0EFC (1 << 6) +#define OSD_VIDWINMD_VHZ0_SHIFT 4 +#define OSD_VIDWINMD_VHZ0 (3 << 4) +#define OSD_VIDWINMD_VVZ0_SHIFT 2 +#define OSD_VIDWINMD_VVZ0 (3 << 2) +#define OSD_VIDWINMD_VFF0 (1 << 1) +#define OSD_VIDWINMD_ACT0 (1 << 0) + +#define OSD_OSDWIN0MD_ATN0E (1 << 14) +#define OSD_OSDWIN0MD_RGB0E (1 << 13) +#define OSD_OSDWIN0MD_BMP0MD_SHIFT 13 +#define OSD_OSDWIN0MD_BMP0MD (3 << 13) +#define OSD_OSDWIN0MD_CLUTS0 (1 << 12) +#define OSD_OSDWIN0MD_OHZ0_SHIFT 10 +#define OSD_OSDWIN0MD_OHZ0 (3 << 10) +#define OSD_OSDWIN0MD_OVZ0_SHIFT 8 +#define OSD_OSDWIN0MD_OVZ0 (3 << 8) +#define OSD_OSDWIN0MD_BMW0_SHIFT 6 +#define OSD_OSDWIN0MD_BMW0 (3 << 6) +#define OSD_OSDWIN0MD_BLND0_SHIFT 3 +#define OSD_OSDWIN0MD_BLND0 (7 << 3) +#define OSD_OSDWIN0MD_TE0 (1 << 2) +#define OSD_OSDWIN0MD_OFF0 (1 << 1) +#define OSD_OSDWIN0MD_OACT0 (1 << 0) + +#define OSD_OSDWIN1MD_OASW (1 << 15) +#define OSD_OSDWIN1MD_ATN1E (1 << 14) +#define OSD_OSDWIN1MD_RGB1E (1 << 13) +#define OSD_OSDWIN1MD_BMP1MD_SHIFT 13 +#define OSD_OSDWIN1MD_BMP1MD (3 << 13) +#define OSD_OSDWIN1MD_CLUTS1 (1 << 12) +#define OSD_OSDWIN1MD_OHZ1_SHIFT 10 +#define OSD_OSDWIN1MD_OHZ1 (3 << 10) +#define OSD_OSDWIN1MD_OVZ1_SHIFT 8 +#define OSD_OSDWIN1MD_OVZ1 (3 << 8) +#define OSD_OSDWIN1MD_BMW1_SHIFT 6 +#define OSD_OSDWIN1MD_BMW1 (3 << 6) +#define OSD_OSDWIN1MD_BLND1_SHIFT 3 +#define OSD_OSDWIN1MD_BLND1 (7 << 3) +#define OSD_OSDWIN1MD_TE1 (1 << 2) +#define OSD_OSDWIN1MD_OFF1 (1 << 1) +#define OSD_OSDWIN1MD_OACT1 (1 << 0) + +#define OSD_OSDATRMD_OASW (1 << 15) +#define OSD_OSDATRMD_OHZA_SHIFT 10 +#define OSD_OSDATRMD_OHZA (3 << 10) +#define OSD_OSDATRMD_OVZA_SHIFT 8 +#define OSD_OSDATRMD_OVZA (3 << 8) +#define OSD_OSDATRMD_BLNKINT_SHIFT 6 +#define OSD_OSDATRMD_BLNKINT (3 << 6) +#define OSD_OSDATRMD_OFFA (1 << 1) +#define OSD_OSDATRMD_BLNK (1 << 0) + +#define OSD_RECTCUR_RCAD_SHIFT 8 +#define OSD_RECTCUR_RCAD (0xff << 8) +#define OSD_RECTCUR_CLUTSR (1 << 7) +#define OSD_RECTCUR_RCHW_SHIFT 4 +#define OSD_RECTCUR_RCHW (7 << 4) +#define OSD_RECTCUR_RCVW_SHIFT 1 +#define OSD_RECTCUR_RCVW (7 << 1) +#define OSD_RECTCUR_RCACT (1 << 0) + +#define OSD_VIDWIN0OFST_V0LO (0x1ff << 0) + +#define OSD_VIDWIN1OFST_V1LO (0x1ff << 0) + +#define OSD_OSDWIN0OFST_O0LO (0x1ff << 0) + +#define OSD_OSDWIN1OFST_O1LO (0x1ff << 0) + +#define OSD_WINOFST_AH_SHIFT 9 + +#define OSD_VIDWIN0OFST_V0AH (0xf << 9) +#define OSD_VIDWIN1OFST_V1AH (0xf << 9) +#define OSD_OSDWIN0OFST_O0AH (0xf << 9) +#define OSD_OSDWIN1OFST_O1AH (0xf << 9) + +#define OSD_VIDWINADH_V1AH_SHIFT 8 +#define OSD_VIDWINADH_V1AH (0x7f << 8) +#define OSD_VIDWINADH_V0AH_SHIFT 0 +#define OSD_VIDWINADH_V0AH (0x7f << 0) + +#define OSD_VIDWIN0ADL_V0AL (0xffff << 0) + +#define OSD_VIDWIN1ADL_V1AL (0xffff << 0) + +#define OSD_OSDWINADH_O1AH_SHIFT 8 +#define OSD_OSDWINADH_O1AH (0x7f << 8) +#define OSD_OSDWINADH_O0AH_SHIFT 0 +#define OSD_OSDWINADH_O0AH (0x7f << 0) + +#define OSD_OSDWIN0ADL_O0AL (0xffff << 0) + +#define OSD_OSDWIN1ADL_O1AL (0xffff << 0) + +#define OSD_BASEPX_BPX (0x3ff << 0) + +#define OSD_BASEPY_BPY (0x1ff << 0) + +#define OSD_VIDWIN0XP_V0X (0x7ff << 0) + +#define OSD_VIDWIN0YP_V0Y (0x7ff << 0) + +#define OSD_VIDWIN0XL_V0W (0x7ff << 0) + +#define OSD_VIDWIN0YL_V0H (0x7ff << 0) + +#define OSD_VIDWIN1XP_V1X (0x7ff << 0) + +#define OSD_VIDWIN1YP_V1Y (0x7ff << 0) + +#define OSD_VIDWIN1XL_V1W (0x7ff << 0) + +#define OSD_VIDWIN1YL_V1H (0x7ff << 0) + +#define OSD_OSDWIN0XP_W0X (0x7ff << 0) + +#define OSD_OSDWIN0YP_W0Y (0x7ff << 0) + +#define OSD_OSDWIN0XL_W0W (0x7ff << 0) + +#define OSD_OSDWIN0YL_W0H (0x7ff << 0) + +#define OSD_OSDWIN1XP_W1X (0x7ff << 0) + +#define OSD_OSDWIN1YP_W1Y (0x7ff << 0) + +#define OSD_OSDWIN1XL_W1W (0x7ff << 0) + +#define OSD_OSDWIN1YL_W1H (0x7ff << 0) + +#define OSD_CURXP_RCSX (0x7ff << 0) + +#define OSD_CURYP_RCSY (0x7ff << 0) + +#define OSD_CURXL_RCSW (0x7ff << 0) + +#define OSD_CURYL_RCSH (0x7ff << 0) + +#define OSD_EXTMODE_EXPMDSEL (1 << 15) +#define OSD_EXTMODE_SCRNHEXP_SHIFT 13 +#define OSD_EXTMODE_SCRNHEXP (3 << 13) +#define OSD_EXTMODE_SCRNVEXP (1 << 12) +#define OSD_EXTMODE_OSD1BLDCHR (1 << 11) +#define OSD_EXTMODE_OSD0BLDCHR (1 << 10) +#define OSD_EXTMODE_ATNOSD1EN (1 << 9) +#define OSD_EXTMODE_ATNOSD0EN (1 << 8) +#define OSD_EXTMODE_OSDHRSZ15 (1 << 7) +#define OSD_EXTMODE_VIDHRSZ15 (1 << 6) +#define OSD_EXTMODE_ZMFILV1HEN (1 << 5) +#define OSD_EXTMODE_ZMFILV1VEN (1 << 4) +#define OSD_EXTMODE_ZMFILV0HEN (1 << 3) +#define OSD_EXTMODE_ZMFILV0VEN (1 << 2) +#define OSD_EXTMODE_EXPFILHEN (1 << 1) +#define OSD_EXTMODE_EXPFILVEN (1 << 0) + +#define OSD_MISCCTL_BLDSEL (1 << 15) +#define OSD_MISCCTL_S420D (1 << 14) +#define OSD_MISCCTL_BMAPT (1 << 13) +#define OSD_MISCCTL_DM365M (1 << 12) +#define OSD_MISCCTL_RGBEN (1 << 7) +#define OSD_MISCCTL_RGBWIN (1 << 6) +#define OSD_MISCCTL_DMANG (1 << 6) +#define OSD_MISCCTL_TMON (1 << 5) +#define OSD_MISCCTL_RSEL (1 << 4) +#define OSD_MISCCTL_CPBSY (1 << 3) +#define OSD_MISCCTL_PPSW (1 << 2) +#define OSD_MISCCTL_PPRV (1 << 1) + +#define OSD_CLUTRAMYCB_Y_SHIFT 8 +#define OSD_CLUTRAMYCB_Y (0xff << 8) +#define OSD_CLUTRAMYCB_CB_SHIFT 0 +#define OSD_CLUTRAMYCB_CB (0xff << 0) + +#define OSD_CLUTRAMCR_CR_SHIFT 8 +#define OSD_CLUTRAMCR_CR (0xff << 8) +#define OSD_CLUTRAMCR_CADDR_SHIFT 0 +#define OSD_CLUTRAMCR_CADDR (0xff << 0) + +#define OSD_TRANSPVAL_RGBTRANS (0xffff << 0) + +#define OSD_TRANSPVALL_RGBL (0xffff << 0) + +#define OSD_TRANSPVALU_Y_SHIFT 8 +#define OSD_TRANSPVALU_Y (0xff << 8) +#define OSD_TRANSPVALU_RGBU_SHIFT 0 +#define OSD_TRANSPVALU_RGBU (0xff << 0) + +#define OSD_TRANSPBMPIDX_BMP1_SHIFT 8 +#define OSD_TRANSPBMPIDX_BMP1 (0xff << 8) +#define OSD_TRANSPBMPIDX_BMP0_SHIFT 0 +#define OSD_TRANSPBMPIDX_BMP0 0xff + +#endif /* _DAVINCI_VPBE_H_ */ diff --git a/drivers/media/platform/davinci/vpbe_venc.c b/drivers/media/platform/davinci/vpbe_venc.c new file mode 100644 index 00000000..87eef9be --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_venc.c @@ -0,0 +1,758 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include "vpbe_venc_regs.h" + +#define MODULE_NAME "davinci-vpbe-venc" + +static struct platform_device_id vpbe_venc_devtype[] = { + { + .name = DM644X_VPBE_VENC_SUBDEV_NAME, + .driver_data = VPBE_VERSION_1, + }, { + .name = DM365_VPBE_VENC_SUBDEV_NAME, + .driver_data = VPBE_VERSION_2, + }, { + .name = DM355_VPBE_VENC_SUBDEV_NAME, + .driver_data = VPBE_VERSION_3, + }, + { + /* sentinel */ + } +}; + +MODULE_DEVICE_TABLE(platform, vpbe_venc_devtype); + +static int debug = 2; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-2"); + +struct venc_state { + struct v4l2_subdev sd; + struct venc_callback *callback; + struct venc_platform_data *pdata; + struct device *pdev; + u32 output; + v4l2_std_id std; + spinlock_t lock; + void __iomem *venc_base; + void __iomem *vdaccfg_reg; + enum vpbe_version venc_type; +}; + +static inline struct venc_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct venc_state, sd); +} + +static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset) +{ + struct venc_state *venc = to_state(sd); + + return readl(venc->venc_base + offset); +} + +static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val) +{ + struct venc_state *venc = to_state(sd); + + writel(val, (venc->venc_base + offset)); + + return val; +} + +static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset, + u32 val, u32 mask) +{ + u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask); + + venc_write(sd, offset, new_val); + + return new_val; +} + +static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val) +{ + struct venc_state *venc = to_state(sd); + + writel(val, venc->vdaccfg_reg); + + val = readl(venc->vdaccfg_reg); + + return val; +} + +#define VDAC_COMPONENT 0x543 +#define VDAC_S_VIDEO 0x210 +/* This function sets the dac of the VPBE for various outputs + */ +static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index) +{ + switch (out_index) { + case 0: + v4l2_dbg(debug, 1, sd, "Setting output to Composite\n"); + venc_write(sd, VENC_DACSEL, 0); + break; + case 1: + v4l2_dbg(debug, 1, sd, "Setting output to Component\n"); + venc_write(sd, VENC_DACSEL, VDAC_COMPONENT); + break; + case 2: + v4l2_dbg(debug, 1, sd, "Setting output to S-video\n"); + venc_write(sd, VENC_DACSEL, VDAC_S_VIDEO); + break; + default: + return -EINVAL; + } + + return 0; +} + +static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable) +{ + struct venc_state *venc = to_state(sd); + + v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n"); + + if (benable) { + venc_write(sd, VENC_VMOD, 0); + venc_write(sd, VENC_CVBS, 0); + venc_write(sd, VENC_LCDOUT, 0); + venc_write(sd, VENC_HSPLS, 0); + venc_write(sd, VENC_HSTART, 0); + venc_write(sd, VENC_HVALID, 0); + venc_write(sd, VENC_HINT, 0); + venc_write(sd, VENC_VSPLS, 0); + venc_write(sd, VENC_VSTART, 0); + venc_write(sd, VENC_VVALID, 0); + venc_write(sd, VENC_VINT, 0); + venc_write(sd, VENC_YCCCTL, 0); + venc_write(sd, VENC_DACSEL, 0); + + } else { + venc_write(sd, VENC_VMOD, 0); + /* disable VCLK output pin enable */ + venc_write(sd, VENC_VIDCTL, 0x141); + + /* Disable output sync pins */ + venc_write(sd, VENC_SYNCCTL, 0); + + /* Disable DCLOCK */ + venc_write(sd, VENC_DCLKCTL, 0); + venc_write(sd, VENC_DRGBX1, 0x0000057C); + + /* Disable LCD output control (accepting default polarity) */ + venc_write(sd, VENC_LCDOUT, 0); + if (venc->venc_type != VPBE_VERSION_3) + venc_write(sd, VENC_CMPNT, 0x100); + venc_write(sd, VENC_HSPLS, 0); + venc_write(sd, VENC_HINT, 0); + venc_write(sd, VENC_HSTART, 0); + venc_write(sd, VENC_HVALID, 0); + + venc_write(sd, VENC_VSPLS, 0); + venc_write(sd, VENC_VINT, 0); + venc_write(sd, VENC_VSTART, 0); + venc_write(sd, VENC_VVALID, 0); + + venc_write(sd, VENC_HSDLY, 0); + venc_write(sd, VENC_VSDLY, 0); + + venc_write(sd, VENC_YCCCTL, 0); + venc_write(sd, VENC_VSTARTA, 0); + + /* Set OSD clock and OSD Sync Adavance registers */ + venc_write(sd, VENC_OSDCLK0, 1); + venc_write(sd, VENC_OSDCLK1, 2); + } +} + +static void +venc_enable_vpss_clock(int venc_type, + enum vpbe_enc_timings_type type, + unsigned int pclock) +{ + if (venc_type == VPBE_VERSION_1) + return; + + if (venc_type == VPBE_VERSION_2 && (type == VPBE_ENC_STD || (type == + VPBE_ENC_DV_TIMINGS && pclock <= 27000000))) { + vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); + vpss_enable_clock(VPSS_VPBE_CLOCK, 1); + return; + } + + if (venc_type == VPBE_VERSION_3 && type == VPBE_ENC_STD) + vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 0); +} + +#define VDAC_CONFIG_SD_V3 0x0E21A6B6 +#define VDAC_CONFIG_SD_V2 0x081141CF +/* + * setting NTSC mode + */ +static int venc_set_ntsc(struct v4l2_subdev *sd) +{ + u32 val; + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n"); + + /* Setup clock at VPSS & VENC for SD */ + vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); + if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0) + return -EINVAL; + + venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_525_60); + venc_enabledigitaloutput(sd, 0); + + if (venc->venc_type == VPBE_VERSION_3) { + venc_write(sd, VENC_CLKCTL, 0x01); + venc_write(sd, VENC_VIDCTL, 0); + val = vdaccfg_write(sd, VDAC_CONFIG_SD_V3); + } else if (venc->venc_type == VPBE_VERSION_2) { + venc_write(sd, VENC_CLKCTL, 0x01); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V2); + } else { + /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ + venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); + /* Set REC656 Mode */ + venc_write(sd, VENC_YCCCTL, 0x1); + venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS); + } + + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); + venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_write(sd, VENC_DACTST, 0x0); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * setting PAL mode + */ +static int venc_set_pal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + + v4l2_dbg(debug, 2, sd, "venc_set_pal\n"); + + /* Setup clock at VPSS & VENC for SD */ + vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); + if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0) + return -EINVAL; + + venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_625_50); + venc_enabledigitaloutput(sd, 0); + + if (venc->venc_type == VPBE_VERSION_3) { + venc_write(sd, VENC_CLKCTL, 0x1); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V3); + } else if (venc->venc_type == VPBE_VERSION_2) { + venc_write(sd, VENC_CLKCTL, 0x1); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V2); + } else { + /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ + venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); + /* Set REC656 Mode */ + venc_write(sd, VENC_YCCCTL, 0x1); + } + + venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT, + VENC_SYNCCTL_OVD); + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, + (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, + (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); + venc_modify(sd, VENC_VMOD, + (1 << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_write(sd, VENC_DACTST, 0x0); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +#define VDAC_CONFIG_HD_V2 0x081141EF +/* + * venc_set_480p59_94 + * + * This function configures the video encoder to EDTV(525p) component setting. + */ +static int venc_set_480p59_94(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n"); + if (venc->venc_type != VPBE_VERSION_1 && + venc->venc_type != VPBE_VERSION_2) + return -EINVAL; + + /* Setup clock at VPSS & VENC for SD */ + if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0) + return -EINVAL; + + venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000); + venc_enabledigitaloutput(sd, 0); + + if (venc->venc_type == VPBE_VERSION_2) + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + if (venc->venc_type == VPBE_VERSION_1) { + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, + VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, + VENC_VDPRO_DAUPS); + } + + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << + VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); + + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * venc_set_625p + * + * This function configures the video encoder to HDTV(625p) component setting + */ +static int venc_set_576p50(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_576p50\n"); + + if (venc->venc_type != VPBE_VERSION_1 && + venc->venc_type != VPBE_VERSION_2) + return -EINVAL; + /* Setup clock at VPSS & VENC for SD */ + if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0) + return -EINVAL; + + venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000); + venc_enabledigitaloutput(sd, 0); + + if (venc->venc_type == VPBE_VERSION_2) + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + if (venc->venc_type == VPBE_VERSION_1) { + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, + VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, + VENC_VDPRO_DAUPS); + } + + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + + venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << + VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * venc_set_720p60_internal - Setup 720p60 in venc for dm365 only + */ +static int venc_set_720p60_internal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0) + return -EINVAL; + + venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000); + venc_enabledigitaloutput(sd, 0); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + venc_write(sd, VENC_VMOD, 0); + /* DM365 component HD mode */ + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_720P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + venc_write(sd, VENC_XHINTVL, 0); + return 0; +} + +/* + * venc_set_1080i30_internal - Setup 1080i30 in venc for dm365 only + */ +static int venc_set_1080i30_internal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0) + return -EINVAL; + + venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000); + venc_enabledigitaloutput(sd, 0); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + + venc_write(sd, VENC_VMOD, 0); + /* DM365 component HD mode */ + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_1080I << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + venc_write(sd, VENC_XHINTVL, 0); + return 0; +} + +static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + v4l2_dbg(debug, 1, sd, "venc_s_std_output\n"); + + if (norm & V4L2_STD_525_60) + return venc_set_ntsc(sd); + else if (norm & V4L2_STD_625_50) + return venc_set_pal(sd); + + return -EINVAL; +} + +static int venc_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *dv_timings) +{ + struct venc_state *venc = to_state(sd); + u32 height = dv_timings->bt.height; + int ret; + + v4l2_dbg(debug, 1, sd, "venc_s_dv_timings\n"); + + if (height == 576) + return venc_set_576p50(sd); + else if (height == 480) + return venc_set_480p59_94(sd); + else if ((height == 720) && + (venc->venc_type == VPBE_VERSION_2)) { + /* TBD setup internal 720p mode here */ + ret = venc_set_720p60_internal(sd); + /* for DM365 VPBE, there is DAC inside */ + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + return ret; + } else if ((height == 1080) && + (venc->venc_type == VPBE_VERSION_2)) { + /* TBD setup internal 1080i mode here */ + ret = venc_set_1080i30_internal(sd); + /* for DM365 VPBE, there is DAC inside */ + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + return ret; + } + return -EINVAL; +} + +static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, + u32 config) +{ + struct venc_state *venc = to_state(sd); + int ret; + + v4l2_dbg(debug, 1, sd, "venc_s_routing\n"); + + ret = venc_set_dac(sd, output); + if (!ret) + venc->output = output; + + return ret; +} + +static long venc_ioctl(struct v4l2_subdev *sd, + unsigned int cmd, + void *arg) +{ + u32 val; + + switch (cmd) { + case VENC_GET_FLD: + val = venc_read(sd, VENC_VSTAT); + *((int *)arg) = ((val & VENC_VSTAT_FIDST) == + VENC_VSTAT_FIDST); + break; + default: + v4l2_err(sd, "Wrong IOCTL cmd\n"); + break; + } + + return 0; +} + +static const struct v4l2_subdev_core_ops venc_core_ops = { + .ioctl = venc_ioctl, +}; + +static const struct v4l2_subdev_video_ops venc_video_ops = { + .s_routing = venc_s_routing, + .s_std_output = venc_s_std_output, + .s_dv_timings = venc_s_dv_timings, +}; + +static const struct v4l2_subdev_ops venc_ops = { + .core = &venc_core_ops, + .video = &venc_video_ops, +}; + +static int venc_initialize(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + int ret; + + /* Set default to output to composite and std to NTSC */ + venc->output = 0; + venc->std = V4L2_STD_525_60; + + ret = venc_s_routing(sd, 0, venc->output, 0); + if (ret < 0) { + v4l2_err(sd, "Error setting output during init\n"); + return -EINVAL; + } + + ret = venc_s_std_output(sd, venc->std); + if (ret < 0) { + v4l2_err(sd, "Error setting std during init\n"); + return -EINVAL; + } + + return ret; +} + +static int venc_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct venc_state **venc = data; + + if (strstr(pdev->name, "vpbe-venc") != NULL) + *venc = platform_get_drvdata(pdev); + + return 0; +} + +struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, + const char *venc_name) +{ + struct venc_state *venc; + int err; + + err = bus_for_each_dev(&platform_bus_type, NULL, &venc, + venc_device_get); + if (venc == NULL) + return NULL; + + v4l2_subdev_init(&venc->sd, &venc_ops); + + strcpy(venc->sd.name, venc_name); + if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) { + v4l2_err(v4l2_dev, + "vpbe unable to register venc sub device\n"); + return NULL; + } + if (venc_initialize(&venc->sd)) { + v4l2_err(v4l2_dev, + "vpbe venc initialization failed\n"); + return NULL; + } + + return &venc->sd; +} +EXPORT_SYMBOL(venc_sub_dev_init); + +static int venc_probe(struct platform_device *pdev) +{ + const struct platform_device_id *pdev_id; + struct venc_state *venc; + struct resource *res; + int ret; + + venc = kzalloc(sizeof(struct venc_state), GFP_KERNEL); + if (venc == NULL) + return -ENOMEM; + + pdev_id = platform_get_device_id(pdev); + if (!pdev_id) { + ret = -EINVAL; + goto free_mem; + } + venc->venc_type = pdev_id->driver_data; + venc->pdev = &pdev->dev; + venc->pdata = pdev->dev.platform_data; + if (NULL == venc->pdata) { + dev_err(venc->pdev, "Unable to get platform data for" + " VENC sub device"); + ret = -ENOENT; + goto free_mem; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(venc->pdev, + "Unable to get VENC register address map\n"); + ret = -ENODEV; + goto free_mem; + } + + if (!request_mem_region(res->start, resource_size(res), "venc")) { + dev_err(venc->pdev, "Unable to reserve VENC MMIO region\n"); + ret = -ENODEV; + goto free_mem; + } + + venc->venc_base = ioremap_nocache(res->start, resource_size(res)); + if (!venc->venc_base) { + dev_err(venc->pdev, "Unable to map VENC IO space\n"); + ret = -ENODEV; + goto release_venc_mem_region; + } + + if (venc->venc_type != VPBE_VERSION_1) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(venc->pdev, + "Unable to get VDAC_CONFIG address map\n"); + ret = -ENODEV; + goto unmap_venc_io; + } + + if (!request_mem_region(res->start, + resource_size(res), "venc")) { + dev_err(venc->pdev, + "Unable to reserve VDAC_CONFIG MMIO region\n"); + ret = -ENODEV; + goto unmap_venc_io; + } + + venc->vdaccfg_reg = ioremap_nocache(res->start, + resource_size(res)); + if (!venc->vdaccfg_reg) { + dev_err(venc->pdev, + "Unable to map VDAC_CONFIG IO space\n"); + ret = -ENODEV; + goto release_vdaccfg_mem_region; + } + } + spin_lock_init(&venc->lock); + platform_set_drvdata(pdev, venc); + dev_notice(venc->pdev, "VENC sub device probe success\n"); + return 0; + +release_vdaccfg_mem_region: + release_mem_region(res->start, resource_size(res)); +unmap_venc_io: + iounmap(venc->venc_base); +release_venc_mem_region: + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); +free_mem: + kfree(venc); + return ret; +} + +static int venc_remove(struct platform_device *pdev) +{ + struct venc_state *venc = platform_get_drvdata(pdev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap((void *)venc->venc_base); + release_mem_region(res->start, resource_size(res)); + if (venc->venc_type != VPBE_VERSION_1) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + iounmap((void *)venc->vdaccfg_reg); + release_mem_region(res->start, resource_size(res)); + } + kfree(venc); + + return 0; +} + +static struct platform_driver venc_driver = { + .probe = venc_probe, + .remove = venc_remove, + .driver = { + .name = MODULE_NAME, + .owner = THIS_MODULE, + }, + .id_table = vpbe_venc_devtype +}; + +module_platform_driver(venc_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VPBE VENC Driver"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/davinci/vpbe_venc_regs.h b/drivers/media/platform/davinci/vpbe_venc_regs.h new file mode 100644 index 00000000..947cb151 --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_venc_regs.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2006-2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2.. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_VENC_REGS_H +#define _VPBE_VENC_REGS_H + +/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */ +#define VENC_VMOD 0x00 +#define VENC_VIDCTL 0x04 +#define VENC_VDPRO 0x08 +#define VENC_SYNCCTL 0x0C +#define VENC_HSPLS 0x10 +#define VENC_VSPLS 0x14 +#define VENC_HINT 0x18 +#define VENC_HSTART 0x1C +#define VENC_HVALID 0x20 +#define VENC_VINT 0x24 +#define VENC_VSTART 0x28 +#define VENC_VVALID 0x2C +#define VENC_HSDLY 0x30 +#define VENC_VSDLY 0x34 +#define VENC_YCCCTL 0x38 +#define VENC_RGBCTL 0x3C +#define VENC_RGBCLP 0x40 +#define VENC_LINECTL 0x44 +#define VENC_CULLLINE 0x48 +#define VENC_LCDOUT 0x4C +#define VENC_BRTS 0x50 +#define VENC_BRTW 0x54 +#define VENC_ACCTL 0x58 +#define VENC_PWMP 0x5C +#define VENC_PWMW 0x60 +#define VENC_DCLKCTL 0x64 +#define VENC_DCLKPTN0 0x68 +#define VENC_DCLKPTN1 0x6C +#define VENC_DCLKPTN2 0x70 +#define VENC_DCLKPTN3 0x74 +#define VENC_DCLKPTN0A 0x78 +#define VENC_DCLKPTN1A 0x7C +#define VENC_DCLKPTN2A 0x80 +#define VENC_DCLKPTN3A 0x84 +#define VENC_DCLKHS 0x88 +#define VENC_DCLKHSA 0x8C +#define VENC_DCLKHR 0x90 +#define VENC_DCLKVS 0x94 +#define VENC_DCLKVR 0x98 +#define VENC_CAPCTL 0x9C +#define VENC_CAPDO 0xA0 +#define VENC_CAPDE 0xA4 +#define VENC_ATR0 0xA8 +#define VENC_ATR1 0xAC +#define VENC_ATR2 0xB0 +#define VENC_VSTAT 0xB8 +#define VENC_RAMADR 0xBC +#define VENC_RAMPORT 0xC0 +#define VENC_DACTST 0xC4 +#define VENC_YCOLVL 0xC8 +#define VENC_SCPROG 0xCC +#define VENC_CVBS 0xDC +#define VENC_CMPNT 0xE0 +#define VENC_ETMG0 0xE4 +#define VENC_ETMG1 0xE8 +#define VENC_ETMG2 0xEC +#define VENC_ETMG3 0xF0 +#define VENC_DACSEL 0xF4 +#define VENC_ARGBX0 0x100 +#define VENC_ARGBX1 0x104 +#define VENC_ARGBX2 0x108 +#define VENC_ARGBX3 0x10C +#define VENC_ARGBX4 0x110 +#define VENC_DRGBX0 0x114 +#define VENC_DRGBX1 0x118 +#define VENC_DRGBX2 0x11C +#define VENC_DRGBX3 0x120 +#define VENC_DRGBX4 0x124 +#define VENC_VSTARTA 0x128 +#define VENC_OSDCLK0 0x12C +#define VENC_OSDCLK1 0x130 +#define VENC_HVLDCL0 0x134 +#define VENC_HVLDCL1 0x138 +#define VENC_OSDHADV 0x13C +#define VENC_CLKCTL 0x140 +#define VENC_GAMCTL 0x144 +#define VENC_XHINTVL 0x174 + +/* bit definitions */ +#define VPBE_PCR_VENC_DIV (1 << 1) +#define VPBE_PCR_CLK_OFF (1 << 0) + +#define VENC_VMOD_VDMD_SHIFT 12 +#define VENC_VMOD_VDMD_YCBCR16 0 +#define VENC_VMOD_VDMD_YCBCR8 1 +#define VENC_VMOD_VDMD_RGB666 2 +#define VENC_VMOD_VDMD_RGB8 3 +#define VENC_VMOD_VDMD_EPSON 4 +#define VENC_VMOD_VDMD_CASIO 5 +#define VENC_VMOD_VDMD_UDISPQVGA 6 +#define VENC_VMOD_VDMD_STNLCD 7 +#define VENC_VMOD_VIE_SHIFT 1 +#define VENC_VMOD_VDMD (7 << 12) +#define VENC_VMOD_ITLCL (1 << 11) +#define VENC_VMOD_ITLC (1 << 10) +#define VENC_VMOD_NSIT (1 << 9) +#define VENC_VMOD_HDMD (1 << 8) +#define VENC_VMOD_TVTYP_SHIFT 6 +#define VENC_VMOD_TVTYP (3 << 6) +#define VENC_VMOD_SLAVE (1 << 5) +#define VENC_VMOD_VMD (1 << 4) +#define VENC_VMOD_BLNK (1 << 3) +#define VENC_VMOD_VIE (1 << 1) +#define VENC_VMOD_VENC (1 << 0) + +/* VMOD TVTYP options for HDMD=0 */ +#define SDTV_NTSC 0 +#define SDTV_PAL 1 +/* VMOD TVTYP options for HDMD=1 */ +#define HDTV_525P 0 +#define HDTV_625P 1 +#define HDTV_1080I 2 +#define HDTV_720P 3 + +#define VENC_VIDCTL_VCLKP (1 << 14) +#define VENC_VIDCTL_VCLKE_SHIFT 13 +#define VENC_VIDCTL_VCLKE (1 << 13) +#define VENC_VIDCTL_VCLKZ_SHIFT 12 +#define VENC_VIDCTL_VCLKZ (1 << 12) +#define VENC_VIDCTL_SYDIR_SHIFT 8 +#define VENC_VIDCTL_SYDIR (1 << 8) +#define VENC_VIDCTL_DOMD_SHIFT 4 +#define VENC_VIDCTL_DOMD (3 << 4) +#define VENC_VIDCTL_YCDIR_SHIFT 0 +#define VENC_VIDCTL_YCDIR (1 << 0) + +#define VENC_VDPRO_ATYCC_SHIFT 5 +#define VENC_VDPRO_ATYCC (1 << 5) +#define VENC_VDPRO_ATCOM_SHIFT 4 +#define VENC_VDPRO_ATCOM (1 << 4) +#define VENC_VDPRO_DAFRQ (1 << 3) +#define VENC_VDPRO_DAUPS (1 << 2) +#define VENC_VDPRO_CUPS (1 << 1) +#define VENC_VDPRO_YUPS (1 << 0) + +#define VENC_SYNCCTL_VPL_SHIFT 3 +#define VENC_SYNCCTL_VPL (1 << 3) +#define VENC_SYNCCTL_HPL_SHIFT 2 +#define VENC_SYNCCTL_HPL (1 << 2) +#define VENC_SYNCCTL_SYEV_SHIFT 1 +#define VENC_SYNCCTL_SYEV (1 << 1) +#define VENC_SYNCCTL_SYEH_SHIFT 0 +#define VENC_SYNCCTL_SYEH (1 << 0) +#define VENC_SYNCCTL_OVD_SHIFT 14 +#define VENC_SYNCCTL_OVD (1 << 14) + +#define VENC_DCLKCTL_DCKEC_SHIFT 11 +#define VENC_DCLKCTL_DCKEC (1 << 11) +#define VENC_DCLKCTL_DCKPW_SHIFT 0 +#define VENC_DCLKCTL_DCKPW (0x3f << 0) + +#define VENC_VSTAT_FIDST (1 << 4) + +#define VENC_CMPNT_MRGB_SHIFT 14 +#define VENC_CMPNT_MRGB (1 << 14) + +#endif /* _VPBE_VENC_REGS_H */ diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c new file mode 100644 index 00000000..93609091 --- /dev/null +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -0,0 +1,2043 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Driver name : VPFE Capture driver + * VPFE Capture driver allows applications to capture and stream video + * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as + * TVP5146 or Raw Bayer RGB image data from an image sensor + * such as Microns' MT9T001, MT9T031 etc. + * + * These SoCs have, in common, a Video Processing Subsystem (VPSS) that + * consists of a Video Processing Front End (VPFE) for capturing + * video/raw image data and Video Processing Back End (VPBE) for displaying + * YUV data through an in-built analog encoder or Digital LCD port. This + * driver is for capture through VPFE. A typical EVM using these SoCs have + * following high level configuration. + * + * + * decoder(TVP5146/ YUV/ + * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) + * data input | | + * V | + * SDRAM | + * V + * Image Processor + * | + * V + * SDRAM + * The data flow happens from a decoder connected to the VPFE over a + * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface + * and to the input of VPFE through an optional MUX (if more inputs are + * to be interfaced on the EVM). The input data is first passed through + * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC + * does very little or no processing on YUV data and does pre-process Raw + * Bayer RGB data through modules such as Defect Pixel Correction (DFC) + * Color Space Conversion (CSC), data gain/offset etc. After this, data + * can be written to SDRAM or can be connected to the image processing + * block such as IPIPE (on DM355 only). + * + * Features supported + * - MMAP IO + * - Capture using TVP5146 over BT.656 + * - support for interfacing decoders using sub device model + * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV + * data capture to SDRAM. + * TODO list + * - Support multiple REQBUF after open + * - Support for de-allocating buffers through REQBUF + * - Support for Raw Bayer RGB capture + * - Support for chaining Image Processor + * - Support for static allocation of buffers + * - Support for USERPTR IO + * - Support for STREAMON before QBUF + * - Support for control ioctls + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include "ccdc_hw_device.h" + +static int debug; +static u32 numbuffers = 3; +static u32 bufsize = (720 * 576 * 2); + +module_param(numbuffers, uint, S_IRUGO); +module_param(bufsize, uint, S_IRUGO); +module_param(debug, int, 0644); + +MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); +MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); + +/* standard information */ +struct vpfe_standard { + v4l2_std_id std_id; + unsigned int width; + unsigned int height; + struct v4l2_fract pixelaspect; + /* 0 - progressive, 1 - interlaced */ + int frame_format; +}; + +/* ccdc configuration */ +struct ccdc_config { + /* This make sure vpfe is probed and ready to go */ + int vpfe_probed; + /* name of ccdc device */ + char name[32]; +}; + +/* data structures */ +static struct vpfe_config_params config_params = { + .min_numbuffers = 3, + .numbuffers = 3, + .min_bufsize = 720 * 480 * 2, + .device_bufsize = 720 * 576 * 2, +}; + +/* ccdc device registered */ +static struct ccdc_hw_device *ccdc_dev; +/* lock for accessing ccdc information */ +static DEFINE_MUTEX(ccdc_lock); +/* ccdc configuration */ +static struct ccdc_config *ccdc_cfg; + +const struct vpfe_standard vpfe_standards[] = { + {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, + {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, +}; + +/* Used when raw Bayer image from ccdc is directly captured to SDRAM */ +static const struct vpfe_pixel_format vpfe_pix_fmts[] = { + { + .fmtdesc = { + .index = 0, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb 8bit A-Law compr.", + .pixelformat = V4L2_PIX_FMT_SBGGR8, + }, + .bpp = 1, + }, + { + .fmtdesc = { + .index = 1, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb - 16bit", + .pixelformat = V4L2_PIX_FMT_SBGGR16, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 2, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb 8bit DPCM compr.", + .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, + }, + .bpp = 1, + }, + { + .fmtdesc = { + .index = 3, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "YCbCr 4:2:2 Interleaved UYVY", + .pixelformat = V4L2_PIX_FMT_UYVY, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 4, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "YCbCr 4:2:2 Interleaved YUYV", + .pixelformat = V4L2_PIX_FMT_YUYV, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 5, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Y/CbCr 4:2:0 - Semi planar", + .pixelformat = V4L2_PIX_FMT_NV12, + }, + .bpp = 1, + }, +}; + +/* + * vpfe_lookup_pix_format() + * lookup an entry in the vpfe pix format table based on pix_format + */ +static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { + if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat) + return &vpfe_pix_fmts[i]; + } + return NULL; +} + +/* + * vpfe_register_ccdc_device. CCDC module calls this to + * register with vpfe capture + */ +int vpfe_register_ccdc_device(struct ccdc_hw_device *dev) +{ + int ret = 0; + printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); + + BUG_ON(!dev->hw_ops.open); + BUG_ON(!dev->hw_ops.enable); + BUG_ON(!dev->hw_ops.set_hw_if_params); + BUG_ON(!dev->hw_ops.configure); + BUG_ON(!dev->hw_ops.set_buftype); + BUG_ON(!dev->hw_ops.get_buftype); + BUG_ON(!dev->hw_ops.enum_pix); + BUG_ON(!dev->hw_ops.set_frame_format); + BUG_ON(!dev->hw_ops.get_frame_format); + BUG_ON(!dev->hw_ops.get_pixel_format); + BUG_ON(!dev->hw_ops.set_pixel_format); + BUG_ON(!dev->hw_ops.set_image_window); + BUG_ON(!dev->hw_ops.get_image_window); + BUG_ON(!dev->hw_ops.get_line_length); + BUG_ON(!dev->hw_ops.getfid); + + mutex_lock(&ccdc_lock); + if (NULL == ccdc_cfg) { + /* + * TODO. Will this ever happen? if so, we need to fix it. + * Proabably we need to add the request to a linked list and + * walk through it during vpfe probe + */ + printk(KERN_ERR "vpfe capture not initialized\n"); + ret = -EFAULT; + goto unlock; + } + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + ret = -EINVAL; + goto unlock; + } + + if (ccdc_dev) { + printk(KERN_ERR "ccdc already registered\n"); + ret = -EINVAL; + goto unlock; + } + + ccdc_dev = dev; +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} +EXPORT_SYMBOL(vpfe_register_ccdc_device); + +/* + * vpfe_unregister_ccdc_device. CCDC module calls this to + * unregister with vpfe capture + */ +void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev) +{ + if (NULL == dev) { + printk(KERN_ERR "invalid ccdc device ptr\n"); + return; + } + + printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", + dev->name); + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + return; + } + + mutex_lock(&ccdc_lock); + ccdc_dev = NULL; + mutex_unlock(&ccdc_lock); + return; +} +EXPORT_SYMBOL(vpfe_unregister_ccdc_device); + +/* + * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings + */ +static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev, + struct v4l2_format *f) +{ + struct v4l2_rect image_win; + enum ccdc_buftype buf_type; + enum ccdc_frmfmt frm_fmt; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + ccdc_dev->hw_ops.get_image_window(&image_win); + f->fmt.pix.width = image_win.width; + f->fmt.pix.height = image_win.height; + f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length(); + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * + f->fmt.pix.height; + buf_type = ccdc_dev->hw_ops.get_buftype(); + f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format(); + frm_fmt = ccdc_dev->hw_ops.get_frame_format(); + if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + f->fmt.pix.field = V4L2_FIELD_NONE; + else if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) + f->fmt.pix.field = V4L2_FIELD_SEQ_TB; + else { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n"); + return -EINVAL; + } + } else { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n"); + return -EINVAL; + } + return 0; +} + +/* + * vpfe_config_ccdc_image_format() + * For a pix format, configure ccdc to setup the capture + */ +static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; + int ret = 0; + + if (ccdc_dev->hw_ops.set_pixel_format( + vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "couldn't set pix format in ccdc\n"); + return -EINVAL; + } + /* configure the image window */ + ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); + + switch (vpfe_dev->fmt.fmt.pix.field) { + case V4L2_FIELD_INTERLACED: + /* do nothing, since it is default */ + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_INTERLEAVED); + break; + case V4L2_FIELD_NONE: + frm_fmt = CCDC_FRMFMT_PROGRESSIVE; + /* buffer type only applicable for interlaced scan */ + break; + case V4L2_FIELD_SEQ_TB: + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_SEPARATED); + break; + default: + return -EINVAL; + } + + /* set the frame format */ + if (!ret) + ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); + return ret; +} +/* + * vpfe_config_image_format() + * For a given standard, this functions sets up the default + * pix format & crop values in the vpfe device and ccdc. It first + * starts with defaults based values from the standard table. + * It then checks if sub device support g_mbus_fmt and then override the + * values based on that.Sets crop values to match with scan resolution + * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the + * values in ccdc + */ +static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, + v4l2_std_id std_id) +{ + struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; + struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { + if (vpfe_standards[i].std_id & std_id) { + vpfe_dev->std_info.active_pixels = + vpfe_standards[i].width; + vpfe_dev->std_info.active_lines = + vpfe_standards[i].height; + vpfe_dev->std_info.frame_format = + vpfe_standards[i].frame_format; + vpfe_dev->std_index = i; + break; + } + } + + if (i == ARRAY_SIZE(vpfe_standards)) { + v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); + return -EINVAL; + } + + vpfe_dev->crop.top = 0; + vpfe_dev->crop.left = 0; + vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; + vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; + pix->width = vpfe_dev->crop.width; + pix->height = vpfe_dev->crop.height; + + /* first field and frame format based on standard frame format */ + if (vpfe_dev->std_info.frame_format) { + pix->field = V4L2_FIELD_INTERLACED; + /* assume V4L2_PIX_FMT_UYVY as default */ + pix->pixelformat = V4L2_PIX_FMT_UYVY; + v4l2_fill_mbus_format(&mbus_fmt, pix, + V4L2_MBUS_FMT_YUYV10_2X10); + } else { + pix->field = V4L2_FIELD_NONE; + /* assume V4L2_PIX_FMT_SBGGR8 */ + pix->pixelformat = V4L2_PIX_FMT_SBGGR8; + v4l2_fill_mbus_format(&mbus_fmt, pix, + V4L2_MBUS_FMT_SBGGR8_1X8); + } + + /* if sub device supports g_mbus_fmt, override the defaults */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, video, g_mbus_fmt, &mbus_fmt); + + if (ret && ret != -ENOIOCTLCMD) { + v4l2_err(&vpfe_dev->v4l2_dev, + "error in getting g_mbus_fmt from sub device\n"); + return ret; + } + v4l2_fill_pix_format(pix, &mbus_fmt); + pix->bytesperline = pix->width * 2; + pix->sizeimage = pix->bytesperline * pix->height; + + /* Sets the values in CCDC */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + if (ret) + return ret; + + /* Update the values of sizeimage and bytesperline */ + if (!ret) { + pix->bytesperline = ccdc_dev->hw_ops.get_line_length(); + pix->sizeimage = pix->bytesperline * pix->height; + } + return ret; +} + +static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) +{ + int ret = 0; + + /* set first input of current subdevice as the current input */ + vpfe_dev->current_input = 0; + + /* set default standard */ + vpfe_dev->std_index = 0; + + /* Configure the default format information */ + ret = vpfe_config_image_format(vpfe_dev, + vpfe_standards[vpfe_dev->std_index].std_id); + if (ret) + return ret; + + /* now open the ccdc device to initialize it */ + mutex_lock(&ccdc_lock); + if (NULL == ccdc_dev) { + v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); + ret = -ENODEV; + goto unlock; + } + + if (!try_module_get(ccdc_dev->owner)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); + ret = -ENODEV; + goto unlock; + } + ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); + if (!ret) + vpfe_dev->initialized = 1; + + /* Clear all VPFE/CCDC interrupts */ + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(-1); + +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} + +/* + * vpfe_open : It creates object of file handle structure and + * stores it in private_data member of filepointer + */ +static int vpfe_open(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); + + if (!vpfe_dev->cfg->num_subdevs) { + v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); + return -ENODEV; + } + + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL); + if (NULL == fh) { + v4l2_err(&vpfe_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + /* store pointer to fh in private_data member of file */ + file->private_data = fh; + fh->vpfe_dev = vpfe_dev; + mutex_lock(&vpfe_dev->lock); + /* If decoder is not initialized. initialize it */ + if (!vpfe_dev->initialized) { + if (vpfe_initialize_device(vpfe_dev)) { + mutex_unlock(&vpfe_dev->lock); + return -ENODEV; + } + } + /* Increment device usrs counter */ + vpfe_dev->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&vpfe_dev->prio, &fh->prio); + mutex_unlock(&vpfe_dev->lock); + return 0; +} + +static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + list_del(&vpfe_dev->next_frm->queue); + vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; + addr = videobuf_to_dma_contig(vpfe_dev->next_frm); + + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); + addr += vpfe_dev->field_off; + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) +{ + v4l2_get_timestamp(&vpfe_dev->cur_frm->ts); + vpfe_dev->cur_frm->state = VIDEOBUF_DONE; + vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; + wake_up_interruptible(&vpfe_dev->cur_frm->done); + vpfe_dev->cur_frm = vpfe_dev->next_frm; +} + +/* ISR for VINT0*/ +static irqreturn_t vpfe_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + enum v4l2_field field; + int fid; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); + field = vpfe_dev->fmt.fmt.pix.field; + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) + goto clear_intr; + + /* only for 6446 this will be applicable */ + if (NULL != ccdc_dev->hw_ops.reset) + ccdc_dev->hw_ops.reset(); + + if (field == V4L2_FIELD_NONE) { + /* handle progressive frame capture */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "frame format is progressive...\n"); + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + goto clear_intr; + } + + /* interlaced or TB capture check which field we are in hardware */ + fid = ccdc_dev->hw_ops.getfid(); + + /* switch the software maintained field id */ + vpfe_dev->field_id ^= 1; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", + fid, vpfe_dev->field_id); + if (fid == vpfe_dev->field_id) { + /* we are in-sync here,continue */ + if (fid == 0) { + /* + * One frame is just being captured. If the next frame + * is available, release the current frame and move on + */ + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + /* + * based on whether the two fields are stored + * interleavely or separately in memory, reconfigure + * the CCDC memory address + */ + if (field == V4L2_FIELD_SEQ_TB) { + vpfe_schedule_bottom_field(vpfe_dev); + } + goto clear_intr; + } + /* + * if one field is just being captured configure + * the next frame get the next frame from the empty + * queue if no frame is available hold on to the + * current buffer + */ + spin_lock(&vpfe_dev->dma_queue_lock); + if (!list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + } else if (fid == 0) { + /* + * out of sync. Recover from any hardware out-of-sync. + * May loose one frame + */ + vpfe_dev->field_id = fid; + } +clear_intr: + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + + return IRQ_HANDLED; +} + +/* vdint1_isr - isr handler for VINT1 interrupt */ +static irqreturn_t vdint1_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) { + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + return IRQ_HANDLED; + } + + spin_lock(&vpfe_dev->dma_queue_lock); + if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && + !list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + + return IRQ_HANDLED; +} + +static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) + free_irq(vpfe_dev->ccdc_irq1, vpfe_dev); +} + +static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { + return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, + IRQF_DISABLED, "vpfe_capture1", + vpfe_dev); + } + return 0; +} + +/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ +static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + vpfe_dev->started = 0; + ccdc_dev->hw_ops.enable(0); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(0); +} + +/* + * vpfe_release : This function deletes buffer queue, frees the + * buffers and the vpfe file handle + */ +static int vpfe_release(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); + + /* Get the device lock */ + mutex_lock(&vpfe_dev->lock); + /* if this instance is doing IO */ + if (fh->io_allowed) { + if (vpfe_dev->started) { + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, + video, s_stream, 0); + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, + "stream off failed in subdev\n"); + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + videobuf_streamoff(&vpfe_dev->buffer_queue); + } + vpfe_dev->io_usrs = 0; + vpfe_dev->numbuffers = config_params.numbuffers; + } + + /* Decrement device usrs counter */ + vpfe_dev->usrs--; + /* Close the priority */ + v4l2_prio_close(&vpfe_dev->prio, fh->prio); + /* If this is the last file handle */ + if (!vpfe_dev->usrs) { + vpfe_dev->initialized = 0; + if (ccdc_dev->hw_ops.close) + ccdc_dev->hw_ops.close(vpfe_dev->pdev); + module_put(ccdc_dev->owner); + } + mutex_unlock(&vpfe_dev->lock); + file->private_data = NULL; + /* Free memory allocated to file handle object */ + kfree(fh); + return 0; +} + +/* + * vpfe_mmap : It is used to map kernel space buffers + * into user spaces + */ +static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* Get the device object and file handle object */ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); + + return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); +} + +/* + * vpfe_poll: It is used for select/poll system call + */ +static unsigned int vpfe_poll(struct file *file, poll_table *wait) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); + + if (vpfe_dev->started) + return videobuf_poll_stream(file, + &vpfe_dev->buffer_queue, wait); + return 0; +} + +/* vpfe capture driver file operations */ +static const struct v4l2_file_operations vpfe_fops = { + .owner = THIS_MODULE, + .open = vpfe_open, + .release = vpfe_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpfe_mmap, + .poll = vpfe_poll +}; + +/* + * vpfe_check_format() + * This function adjust the input pixel format as per hardware + * capabilities and update the same in pixfmt. + * Following algorithm used :- + * + * If given pixformat is not in the vpfe list of pix formats or not + * supported by the hardware, current value of pixformat in the device + * is used + * If given field is not supported, then current field is used. If field + * is different from current, then it is matched with that from sub device. + * Minimum height is 2 lines for interlaced or tb field and 1 line for + * progressive. Maximum height is clamped to active active lines of scan + * Minimum width is 32 bytes in memory and width is clamped to active + * pixels of scan. + * bytesperline is a multiple of 32. + */ +static const struct vpfe_pixel_format * + vpfe_check_format(struct vpfe_device *vpfe_dev, + struct v4l2_pix_format *pixfmt) +{ + u32 min_height = 1, min_width = 32, max_width, max_height; + const struct vpfe_pixel_format *vpfe_pix_fmt; + u32 pix; + int temp, found; + + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + if (NULL == vpfe_pix_fmt) { + /* + * use current pixel format in the vpfe device. We + * will find this pix format in the table + */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check if hw supports it */ + temp = 0; + found = 0; + while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { + if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) { + found = 1; + break; + } + temp++; + } + + if (!found) { + /* use current pixel format */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + /* + * Since this is currently used in the vpfe device, we + * will find this pix format in the table + */ + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check what field format is supported */ + if (pixfmt->field == V4L2_FIELD_ANY) { + /* if field is any, use current value as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + } + + /* + * if field is not same as current field in the vpfe device + * try matching the field with the sub device field + */ + if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { + /* + * If field value is not in the supported fields, use current + * field used in the device as default + */ + switch (pixfmt->field) { + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + /* if sub device is supporting progressive, use that */ + if (!vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_NONE; + break; + case V4L2_FIELD_NONE: + if (vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_INTERLACED; + break; + + default: + /* use current field as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + break; + } + } + + /* Now adjust image resolutions supported */ + if (pixfmt->field == V4L2_FIELD_INTERLACED || + pixfmt->field == V4L2_FIELD_SEQ_TB) + min_height = 2; + + max_width = vpfe_dev->std_info.active_pixels; + max_height = vpfe_dev->std_info.active_lines; + min_width /= vpfe_pix_fmt->bpp; + + v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); + + pixfmt->width = clamp((pixfmt->width), min_width, max_width); + pixfmt->height = clamp((pixfmt->height), min_height, max_height); + + /* If interlaced, adjust height to be a multiple of 2 */ + if (pixfmt->field == V4L2_FIELD_INTERLACED) + pixfmt->height &= (~1); + /* + * recalculate bytesperline and sizeimage since width + * and height might have changed + */ + pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) + & ~31); + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + pixfmt->sizeimage = + pixfmt->bytesperline * pixfmt->height + + ((pixfmt->bytesperline * pixfmt->height) >> 1); + else + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height =" + " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, + pixfmt->bytesperline, pixfmt->sizeimage); + return vpfe_pix_fmt; +} + +static int vpfe_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); + + cap->version = VPFE_CAPTURE_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); + strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); + strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); + return 0; +} + +static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); + /* Fill in the information about format */ + *fmt = vpfe_dev->fmt; + return ret; +} + +static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmt; + int temp_index; + u32 pix; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); + + if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) + return -EINVAL; + + /* Fill in the information about format */ + pix_fmt = vpfe_lookup_pix_format(pix); + if (NULL != pix_fmt) { + temp_index = fmt->index; + *fmt = pix_fmt->fmtdesc; + fmt->index = temp_index; + return 0; + } + return -EINVAL; +} + +static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); + + /* If streaming is started, return error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + + /* Check for valid frame format */ + pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); + + if (NULL == pix_fmts) + return -EINVAL; + + /* store the pixel format in the device object */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* First detach any IRQ if currently attached */ + vpfe_detach_irq(vpfe_dev); + vpfe_dev->fmt = *fmt; + /* set image capture parameters in the ccdc */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); + + pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); + if (NULL == pix_fmts) + return -EINVAL; + return 0; +} + +/* + * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a + * given app input index + */ +static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, + int *subdev_index, + int *subdev_input_index, + int app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (app_input_index < (j + sdinfo->num_inputs)) { + *subdev_index = i; + *subdev_input_index = app_input_index - j; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +/* + * vpfe_get_app_input - Get app input index for a given subdev input index + * driver stores the input index of the current sub device and translate it + * when application request the current input + */ +static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, + int *app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { + if (vpfe_dev->current_input >= sdinfo->num_inputs) + return -1; + *app_input_index = j + vpfe_dev->current_input; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +static int vpfe_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev, index ; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); + + if (vpfe_get_subdev_input_index(vpfe_dev, + &subdev, + &index, + inp->index) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "input information not found" + " for the subdev\n"); + return -EINVAL; + } + sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; + memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input)); + return 0; +} + +static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); + + return vpfe_get_app_input_index(vpfe_dev, index); +} + + +static int vpfe_s_input(struct file *file, void *priv, unsigned int index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct v4l2_subdev *sd; + struct vpfe_subdev_info *sdinfo; + int subdev_index, inp_index; + struct vpfe_route *route; + u32 input = 0, output = 0; + int ret = -EINVAL; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* + * If streaming is started return device busy + * error + */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); + ret = -EBUSY; + goto unlock_out; + } + ret = vpfe_get_subdev_input_index(vpfe_dev, + &subdev_index, + &inp_index, + index); + if (ret < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); + goto unlock_out; + } + + sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index]; + sd = vpfe_dev->sd[subdev_index]; + route = &sdinfo->routes[inp_index]; + if (route && sdinfo->can_route) { + input = route->input; + output = route->output; + } + + if (sd) + ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0); + + if (ret) { + v4l2_err(&vpfe_dev->v4l2_dev, + "vpfe_doioctl:error in setting input in decoder\n"); + ret = -EINVAL; + goto unlock_out; + } + vpfe_dev->current_subdev = sdinfo; + if (sd) + vpfe_dev->v4l2_dev.ctrl_handler = sd->ctrl_handler; + vpfe_dev->current_input = index; + vpfe_dev->std_index = 0; + + /* set the bus/interface parameter for the sub device in ccdc */ + ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params); + if (ret) + goto unlock_out; + + /* set the default image parameters in the device */ + ret = vpfe_config_image_format(vpfe_dev, + vpfe_standards[vpfe_dev->std_index].std_id); +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + sdinfo = vpfe_dev->current_subdev; + if (ret) + return ret; + /* Call querystd function of decoder device */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, querystd, std_id); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); + + /* Call decoder driver function to set the standard */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + sdinfo = vpfe_dev->current_subdev; + /* If streaming is started, return device busy error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); + ret = -EBUSY; + goto unlock_out; + } + + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + core, s_std, std_id); + if (ret < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); + goto unlock_out; + } + ret = vpfe_config_image_format(vpfe_dev, std_id); + +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); + + *std_id = vpfe_standards[vpfe_dev->std_index].std_id; + return 0; +} +/* + * Videobuf operations + */ +static int vpfe_videobuf_setup(struct videobuf_queue *vq, + unsigned int *count, + unsigned int *size) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n"); + *size = vpfe_dev->fmt.fmt.pix.sizeimage; + if (vpfe_dev->memory == V4L2_MEMORY_MMAP && + vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize) + *size = config_params.device_bufsize; + + if (*count < config_params.min_numbuffers) + *count = config_params.min_numbuffers; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "count=%d, size=%d\n", *count, *size); + return 0; +} + +static int vpfe_videobuf_prepare(struct videobuf_queue *vq, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long addr; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); + + /* If buffer is not initialized, initialize it */ + if (VIDEOBUF_NEEDS_INIT == vb->state) { + vb->width = vpfe_dev->fmt.fmt.pix.width; + vb->height = vpfe_dev->fmt.fmt.pix.height; + vb->size = vpfe_dev->fmt.fmt.pix.sizeimage; + vb->field = field; + + ret = videobuf_iolock(vq, vb, NULL); + if (ret < 0) + return ret; + + addr = videobuf_to_dma_contig(vb); + /* Make sure user addresses are aligned to 32 bytes */ + if (!ALIGN(addr, 32)) + return -EINVAL; + + vb->state = VIDEOBUF_PREPARED; + } + return 0; +} + +static void vpfe_videobuf_queue(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + /* Get the file handle object and device object */ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n"); + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); + list_add_tail(&vb->queue, &vpfe_dev->dma_queue); + spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); + + /* Change state of the buffer */ + vb->state = VIDEOBUF_QUEUED; +} + +static void vpfe_videobuf_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n"); + + /* + * We need to flush the buffer from the dma queue since + * they are de-allocated + */ + spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); + INIT_LIST_HEAD(&vpfe_dev->dma_queue); + spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); + videobuf_dma_contig_free(vq, vb); + vb->state = VIDEOBUF_NEEDS_INIT; +} + +static struct videobuf_queue_ops vpfe_videobuf_qops = { + .buf_setup = vpfe_videobuf_setup, + .buf_prepare = vpfe_videobuf_prepare, + .buf_queue = vpfe_videobuf_queue, + .buf_release = vpfe_videobuf_release, +}; + +/* + * vpfe_reqbufs. currently support REQBUF only once opening + * the device. + */ +static int vpfe_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + if (vpfe_dev->io_usrs != 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); + ret = -EBUSY; + goto unlock_out; + } + + vpfe_dev->memory = req_buf->memory; + videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue, + &vpfe_videobuf_qops, + vpfe_dev->pdev, + &vpfe_dev->irqlock, + req_buf->type, + vpfe_dev->fmt.fmt.pix.field, + sizeof(struct videobuf_buffer), + fh, NULL); + + fh->io_allowed = 1; + vpfe_dev->io_usrs = 1; + INIT_LIST_HEAD(&vpfe_dev->dma_queue); + ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf); +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + if (vpfe_dev->memory != V4L2_MEMORY_MMAP) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); + return -EINVAL; + } + /* Call videobuf_querybuf to get information */ + return videobuf_querybuf(&vpfe_dev->buffer_queue, buf); +} + +static int vpfe_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* + * If this file handle is not allowed to do IO, + * return error + */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + return videobuf_qbuf(&vpfe_dev->buffer_queue, p); +} + +static int vpfe_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + return videobuf_dqbuf(&vpfe_dev->buffer_queue, + buf, file->f_flags & O_NONBLOCK); +} + +/* + * vpfe_calculate_offsets : This function calculates buffers offset + * for top and bottom field + */ +static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev) +{ + struct v4l2_rect image_win; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n"); + + ccdc_dev->hw_ops.get_image_window(&image_win); + vpfe_dev->field_off = image_win.height * image_win.width; +} + +/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */ +static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + ccdc_dev->hw_ops.enable(1); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(1); + vpfe_dev->started = 1; +} + +/* + * vpfe_streamon. Assume the DMA queue is not empty. + * application is expected to call QBUF before calling + * this ioctl. If not, driver returns error + */ +static int vpfe_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + unsigned long addr; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_stream, 1); + + if (ret && (ret != -ENOIOCTLCMD)) { + v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n"); + return -EINVAL; + } + + /* If buffer queue is empty, return error */ + if (list_empty(&vpfe_dev->buffer_queue.stream)) { + v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); + return -EIO; + } + + /* Call videobuf_streamon to start streaming * in videobuf */ + ret = videobuf_streamon(&vpfe_dev->buffer_queue); + if (ret) + return ret; + + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + goto streamoff; + /* Get the next frame from the buffer queue */ + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + vpfe_dev->cur_frm = vpfe_dev->next_frm; + /* Remove buffer from the buffer queue */ + list_del(&vpfe_dev->cur_frm->queue); + /* Mark state of the current frame to active */ + vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE; + /* Initialize field_id and started member */ + vpfe_dev->field_id = 0; + addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); + + /* Calculate field offset */ + vpfe_calculate_offsets(vpfe_dev); + + if (vpfe_attach_irq(vpfe_dev) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in attaching interrupt handle\n"); + ret = -EFAULT; + goto unlock_out; + } + if (ccdc_dev->hw_ops.configure() < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in configuring ccdc\n"); + ret = -EINVAL; + goto unlock_out; + } + ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr)); + vpfe_start_ccdc_capture(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +unlock_out: + mutex_unlock(&vpfe_dev->lock); +streamoff: + ret = videobuf_streamoff(&vpfe_dev->buffer_queue); + return ret; +} + +static int vpfe_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "device started\n"); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_stream, 0); + + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n"); + ret = videobuf_streamoff(&vpfe_dev->buffer_queue); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n"); + + if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards)) + return -EINVAL; + + memset(crop, 0, sizeof(struct v4l2_cropcap)); + crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + crop->bounds.width = crop->defrect.width = + vpfe_standards[vpfe_dev->std_index].width; + crop->bounds.height = crop->defrect.height = + vpfe_standards[vpfe_dev->std_index].height; + crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect; + return 0; +} + +static int vpfe_g_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n"); + + crop->c = vpfe_dev->crop; + return 0; +} + +static int vpfe_s_crop(struct file *file, void *priv, + const struct v4l2_crop *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct v4l2_rect rect = crop->c; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n"); + + if (vpfe_dev->started) { + /* make sure streaming is not started */ + v4l2_err(&vpfe_dev->v4l2_dev, + "Cannot change crop when streaming is ON\n"); + return -EBUSY; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + if (rect.top < 0 || rect.left < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "doesn't support negative values for top & left\n"); + ret = -EINVAL; + goto unlock_out; + } + + /* adjust the width to 16 pixel boundary */ + rect.width = ((rect.width + 15) & ~0xf); + + /* make sure parameters are valid */ + if ((rect.left + rect.width > + vpfe_dev->std_info.active_pixels) || + (rect.top + rect.height > + vpfe_dev->std_info.active_lines)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n"); + ret = -EINVAL; + goto unlock_out; + } + ccdc_dev->hw_ops.set_image_window(&rect); + vpfe_dev->fmt.fmt.pix.width = rect.width; + vpfe_dev->fmt.fmt.pix.height = rect.height; + vpfe_dev->fmt.fmt.pix.bytesperline = + ccdc_dev->hw_ops.get_line_length(); + vpfe_dev->fmt.fmt.pix.sizeimage = + vpfe_dev->fmt.fmt.pix.bytesperline * + vpfe_dev->fmt.fmt.pix.height; + vpfe_dev->crop = rect; +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + + +static long vpfe_param_handler(struct file *file, void *priv, + bool valid_prio, unsigned int cmd, void *param) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n"); + + if (vpfe_dev->started) { + /* only allowed if streaming is not started */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "device already started\n"); + return -EBUSY; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + switch (cmd) { + case VPFE_CMD_S_CCDC_RAW_PARAMS: + v4l2_warn(&vpfe_dev->v4l2_dev, + "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n"); + if (ccdc_dev->hw_ops.set_params) { + ret = ccdc_dev->hw_ops.set_params(param); + if (ret) { + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "Error setting parameters in CCDC\n"); + goto unlock_out; + } + ret = vpfe_get_ccdc_image_format(vpfe_dev, + &vpfe_dev->fmt); + if (ret < 0) { + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "Invalid image format at CCDC\n"); + goto unlock_out; + } + } else { + ret = -EINVAL; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n"); + } + break; + default: + ret = -ENOTTY; + } +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + + +/* vpfe capture ioctl operations */ +static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { + .vidioc_querycap = vpfe_querycap, + .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap, + .vidioc_enum_input = vpfe_enum_input, + .vidioc_g_input = vpfe_g_input, + .vidioc_s_input = vpfe_s_input, + .vidioc_querystd = vpfe_querystd, + .vidioc_s_std = vpfe_s_std, + .vidioc_g_std = vpfe_g_std, + .vidioc_reqbufs = vpfe_reqbufs, + .vidioc_querybuf = vpfe_querybuf, + .vidioc_qbuf = vpfe_qbuf, + .vidioc_dqbuf = vpfe_dqbuf, + .vidioc_streamon = vpfe_streamon, + .vidioc_streamoff = vpfe_streamoff, + .vidioc_cropcap = vpfe_cropcap, + .vidioc_g_crop = vpfe_g_crop, + .vidioc_s_crop = vpfe_s_crop, + .vidioc_default = vpfe_param_handler, +}; + +static struct vpfe_device *vpfe_initialize(void) +{ + struct vpfe_device *vpfe_dev; + + /* Default number of buffers should be 3 */ + if ((numbuffers > 0) && + (numbuffers < config_params.min_numbuffers)) + numbuffers = config_params.min_numbuffers; + + /* + * Set buffer size to min buffers size if invalid buffer size is + * given + */ + if (bufsize < config_params.min_bufsize) + bufsize = config_params.min_bufsize; + + config_params.numbuffers = numbuffers; + + if (numbuffers) + config_params.device_bufsize = bufsize; + + /* Allocate memory for device objects */ + vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL); + + return vpfe_dev; +} + +/* + * vpfe_probe : This function creates device entries by register + * itself to the V4L2 driver and initializes fields of each + * device objects + */ +static int vpfe_probe(struct platform_device *pdev) +{ + struct vpfe_subdev_info *sdinfo; + struct vpfe_config *vpfe_cfg; + struct resource *res1; + struct vpfe_device *vpfe_dev; + struct i2c_adapter *i2c_adap; + struct video_device *vfd; + int ret = -ENOMEM, i, j; + int num_subdevs = 0; + + /* Get the pointer to the device object */ + vpfe_dev = vpfe_initialize(); + + if (!vpfe_dev) { + v4l2_err(pdev->dev.driver, + "Failed to allocate memory for vpfe_dev\n"); + return ret; + } + + vpfe_dev->pdev = &pdev->dev; + + if (NULL == pdev->dev.platform_data) { + v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); + ret = -ENODEV; + goto probe_free_dev_mem; + } + + vpfe_cfg = pdev->dev.platform_data; + vpfe_dev->cfg = vpfe_cfg; + if (NULL == vpfe_cfg->ccdc || + NULL == vpfe_cfg->card_name || + NULL == vpfe_cfg->sub_devs) { + v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); + ret = -ENOENT; + goto probe_free_dev_mem; + } + + /* Allocate memory for ccdc configuration */ + ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL); + if (NULL == ccdc_cfg) { + v4l2_err(pdev->dev.driver, + "Memory allocation failed for ccdc_cfg\n"); + goto probe_free_dev_mem; + } + + mutex_lock(&ccdc_lock); + + strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32); + /* Get VINT0 irq resource */ + res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get interrupt for VINT0\n"); + ret = -ENODEV; + goto probe_free_ccdc_cfg_mem; + } + vpfe_dev->ccdc_irq0 = res1->start; + + /* Get VINT1 irq resource */ + res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get interrupt for VINT1\n"); + ret = -ENODEV; + goto probe_free_ccdc_cfg_mem; + } + vpfe_dev->ccdc_irq1 = res1->start; + + ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED, + "vpfe_capture0", vpfe_dev); + + if (0 != ret) { + v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); + goto probe_free_ccdc_cfg_mem; + } + + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (NULL == vfd) { + ret = -ENOMEM; + v4l2_err(pdev->dev.driver, "Unable to alloc video device\n"); + goto probe_out_release_irq; + } + + /* Initialize field of video device */ + vfd->release = video_device_release; + vfd->fops = &vpfe_fops; + vfd->ioctl_ops = &vpfe_ioctl_ops; + vfd->tvnorms = 0; + vfd->v4l2_dev = &vpfe_dev->v4l2_dev; + snprintf(vfd->name, sizeof(vfd->name), + "%s_V%d.%d.%d", + CAPTURE_DRV_NAME, + (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff, + (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff, + (VPFE_CAPTURE_VERSION_CODE) & 0xff); + /* Set video_dev to the video device */ + vpfe_dev->video_dev = vfd; + + ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev); + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register v4l2 device.\n"); + goto probe_out_video_release; + } + v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n"); + spin_lock_init(&vpfe_dev->irqlock); + spin_lock_init(&vpfe_dev->dma_queue_lock); + mutex_init(&vpfe_dev->lock); + + /* Initialize field of the device objects */ + vpfe_dev->numbuffers = config_params.numbuffers; + + /* Initialize prio member of device object */ + v4l2_prio_init(&vpfe_dev->prio); + /* register video device */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "trying to register vpfe device.\n"); + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "video_dev=%x\n", (int)&vpfe_dev->video_dev); + vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + ret = video_register_device(vpfe_dev->video_dev, + VFL_TYPE_GRABBER, -1); + + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register video device.\n"); + goto probe_out_v4l2_unregister; + } + + v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n"); + /* set the driver data in platform device */ + platform_set_drvdata(pdev, vpfe_dev); + /* set driver private data */ + video_set_drvdata(vpfe_dev->video_dev, vpfe_dev); + i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id); + num_subdevs = vpfe_cfg->num_subdevs; + vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs, + GFP_KERNEL); + if (NULL == vpfe_dev->sd) { + v4l2_err(&vpfe_dev->v4l2_dev, + "unable to allocate memory for subdevice pointers\n"); + ret = -ENOMEM; + goto probe_out_video_unregister; + } + + for (i = 0; i < num_subdevs; i++) { + struct v4l2_input *inps; + + sdinfo = &vpfe_cfg->sub_devs[i]; + + /* Load up the subdevice */ + vpfe_dev->sd[i] = + v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, + i2c_adap, + &sdinfo->board_info, + NULL); + if (vpfe_dev->sd[i]) { + v4l2_info(&vpfe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + sdinfo->name); + vpfe_dev->sd[i]->grp_id = sdinfo->grp_id; + /* update tvnorms from the sub devices */ + for (j = 0; j < sdinfo->num_inputs; j++) { + inps = &sdinfo->inputs[j]; + vfd->tvnorms |= inps->std; + } + } else { + v4l2_info(&vpfe_dev->v4l2_dev, + "v4l2 sub device %s register fails\n", + sdinfo->name); + goto probe_sd_out; + } + } + + /* set first sub device as current one */ + vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0]; + vpfe_dev->v4l2_dev.ctrl_handler = vpfe_dev->sd[0]->ctrl_handler; + + /* We have at least one sub device to work with */ + mutex_unlock(&ccdc_lock); + return 0; + +probe_sd_out: + kfree(vpfe_dev->sd); +probe_out_video_unregister: + video_unregister_device(vpfe_dev->video_dev); +probe_out_v4l2_unregister: + v4l2_device_unregister(&vpfe_dev->v4l2_dev); +probe_out_video_release: + if (!video_is_registered(vpfe_dev->video_dev)) + video_device_release(vpfe_dev->video_dev); +probe_out_release_irq: + free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); +probe_free_ccdc_cfg_mem: + kfree(ccdc_cfg); + mutex_unlock(&ccdc_lock); +probe_free_dev_mem: + kfree(vpfe_dev); + return ret; +} + +/* + * vpfe_remove : It un-register device from V4L2 driver + */ +static int vpfe_remove(struct platform_device *pdev) +{ + struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); + + v4l2_info(pdev->dev.driver, "vpfe_remove\n"); + + free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); + kfree(vpfe_dev->sd); + v4l2_device_unregister(&vpfe_dev->v4l2_dev); + video_unregister_device(vpfe_dev->video_dev); + kfree(vpfe_dev); + kfree(ccdc_cfg); + return 0; +} + +static int vpfe_suspend(struct device *dev) +{ + return 0; +} + +static int vpfe_resume(struct device *dev) +{ + return 0; +} + +static const struct dev_pm_ops vpfe_dev_pm_ops = { + .suspend = vpfe_suspend, + .resume = vpfe_resume, +}; + +static struct platform_driver vpfe_driver = { + .driver = { + .name = CAPTURE_DRV_NAME, + .owner = THIS_MODULE, + .pm = &vpfe_dev_pm_ops, + }, + .probe = vpfe_probe, + .remove = vpfe_remove, +}; + +module_platform_driver(vpfe_driver); diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c new file mode 100644 index 00000000..ea82a8bd --- /dev/null +++ b/drivers/media/platform/davinci/vpif.c @@ -0,0 +1,508 @@ +/* + * vpif - Video Port Interface driver + * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) + * that receiveing video byte stream and two channels(2, 3) for video output. + * The hardware supports SDTV, HDTV formats, raw data capture. + * Currently, the driver supports NTSC and PAL standards. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); +MODULE_LICENSE("GPL"); + +#define VPIF_CH0_MAX_MODES (22) +#define VPIF_CH1_MAX_MODES (02) +#define VPIF_CH2_MAX_MODES (15) +#define VPIF_CH3_MAX_MODES (02) + +static resource_size_t res_len; +static struct resource *res; +spinlock_t vpif_lock; + +void __iomem *vpif_base; +EXPORT_SYMBOL_GPL(vpif_base); + +/** + * vpif_ch_params: video standard configuration parameters for vpif + * The table must include all presets from supported subdevices. + */ +const struct vpif_channel_config_params vpif_ch_params[] = { + /* HDTV formats */ + { + .name = "480p59_94", + .width = 720, + .height = 480, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 138-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 43, + .l5 = 523, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, + }, + { + .name = "576p50", + .width = 720, + .height = 576, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 144-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 45, + .l5 = 621, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_720X576P50, + }, + { + .name = "720p50", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 700-8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1280X720P50, + }, + { + .name = "720p60", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 370 - 8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1280X720P60, + }, + { + .name = "1080I50", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 720 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I50, + }, + { + .name = "1080I60", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, + }, + { + .name = "1080p60", + .width = 1920, + .height = 1080, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 42, + .l5 = 1122, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1920X1080P60, + }, + + /* SDTV formats */ + { + .name = "NTSC_M", + .width = 720, + .height = 480, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 268, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 263, + .l7 = 266, + .l9 = 286, + .l11 = 525, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_525_60, + }, + { + .name = "PAL_BDGHIK", + .width = 720, + .height = 576, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 280, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 311, + .l7 = 313, + .l9 = 336, + .l11 = 624, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_625_50, + }, +}; +EXPORT_SYMBOL_GPL(vpif_ch_params); + +const unsigned int vpif_ch_params_count = ARRAY_SIZE(vpif_ch_params); +EXPORT_SYMBOL_GPL(vpif_ch_params_count); + +static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) +{ + if (val) + vpif_set_bit(reg, bit); + else + vpif_clr_bit(reg, bit); +} + +/* This structure is used to keep track of VPIF size register's offsets */ +struct vpif_registers { + u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; + u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; + u32 vanc1_size, width_mask, len_mask; + u8 max_modes; +}; + +static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { + /* Channel0 */ + { + VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, + VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, + VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH0_MAX_MODES, + }, + /* Channel1 */ + { + VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, + VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, + VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH1_MAX_MODES, + }, + /* Channel2 */ + { + VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, + VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, + VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, + VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH2_MAX_MODES + }, + /* Channel3 */ + { + VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, + VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, + VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, + VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH3_MAX_MODES + }, +}; + +/* vpif_set_mode_info: + * This function is used to set horizontal and vertical config parameters + * As per the standard in the channel, configure the values of L1, L3, + * L5, L7 L9, L11 in VPIF Register , also write width and height + */ +static void vpif_set_mode_info(const struct vpif_channel_config_params *config, + u8 channel_id, u8 config_channel_id) +{ + u32 value; + + value = (config->eav2sav & vpifregs[config_channel_id].width_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); + regw(value, vpifregs[channel_id].h_cfg); + + value = (config->l1 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l3 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_00); + + value = (config->l5 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l7 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_01); + + value = (config->l9 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l11 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_02); + + value = (config->vsize & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg); +} + +/* config_vpif_params + * Function to set the parameters of a channel + * Mainly modifies the channel ciontrol register + * It sets frame format, yc mux mode + */ +static void config_vpif_params(struct vpif_params *vpifparams, + u8 channel_id, u8 found) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + u32 value, ch_nip, reg; + u8 start, end; + int i; + + start = channel_id; + end = channel_id + found; + + for (i = start; i < end; i++) { + reg = vpifregs[i].ch_ctrl; + if (channel_id < 2) + ch_nip = VPIF_CAPTURE_CH_NIP; + else + ch_nip = VPIF_DISPLAY_CH_NIP; + + vpif_wr_bit(reg, ch_nip, config->frm_fmt); + vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); + vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, + vpifparams->video_params.storage_mode); + + /* Set raster scanning SDR Format */ + vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); + vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); + + if (channel_id > 1) /* Set the Pixel enable bit */ + vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); + else if (config->capture_format) { + /* Set the polarity of various pins */ + vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, + vpifparams->iface.fid_pol); + vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, + vpifparams->iface.vd_pol); + vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, + vpifparams->iface.hd_pol); + + value = regr(reg); + /* Set data width */ + value &= ~(0x3u << + VPIF_CH_DATA_WIDTH_BIT); + value |= ((vpifparams->params.data_sz) << + VPIF_CH_DATA_WIDTH_BIT); + regw(value, reg); + } + + /* Write the pitch in the driver */ + regw((vpifparams->video_params.hpitch), + vpifregs[i].line_offset); + } +} + +/* vpif_set_video_params + * This function is used to set video parameters in VPIF register + */ +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + int found = 1; + + vpif_set_mode_info(config, channel_id, channel_id); + if (!config->ycmux_mode) { + /* YC are on separate channels (HDTV formats) */ + vpif_set_mode_info(config, channel_id + 1, channel_id); + found = 2; + } + + config_vpif_params(vpifparams, channel_id, found); + + regw(0x80, VPIF_REQ_SIZE); + regw(0x01, VPIF_EMULATION_CTRL); + + return found; +} +EXPORT_SYMBOL(vpif_set_video_params); + +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id) +{ + u32 value; + + value = 0x3F8 & (vbiparams->hstart0); + value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); + regw(value, vpifregs[channel_id].vanc0_strt); + + value = 0x3F8 & (vbiparams->hstart1); + value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); + regw(value, vpifregs[channel_id].vanc1_strt); + + value = 0x3F8 & (vbiparams->hsize0); + value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); + regw(value, vpifregs[channel_id].vanc0_size); + + value = 0x3F8 & (vbiparams->hsize1); + value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); + regw(value, vpifregs[channel_id].vanc1_size); + +} +EXPORT_SYMBOL(vpif_set_vbi_display_params); + +int vpif_channel_getfid(u8 channel_id) +{ + return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) + >> VPIF_CH_FID_SHIFT; +} +EXPORT_SYMBOL(vpif_channel_getfid); + +static int vpif_probe(struct platform_device *pdev) +{ + int status = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOENT; + + res_len = resource_size(res); + + res = request_mem_region(res->start, res_len, res->name); + if (!res) + return -EBUSY; + + vpif_base = ioremap(res->start, res_len); + if (!vpif_base) { + status = -EBUSY; + goto fail; + } + + pm_runtime_enable(&pdev->dev); + pm_runtime_get(&pdev->dev); + + spin_lock_init(&vpif_lock); + dev_info(&pdev->dev, "vpif probe success\n"); + return 0; + +fail: + release_mem_region(res->start, res_len); + return status; +} + +static int vpif_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + iounmap(vpif_base); + release_mem_region(res->start, res_len); + return 0; +} + +#ifdef CONFIG_PM +static int vpif_suspend(struct device *dev) +{ + pm_runtime_put(dev); + return 0; +} + +static int vpif_resume(struct device *dev) +{ + pm_runtime_get(dev); + return 0; +} + +static const struct dev_pm_ops vpif_pm = { + .suspend = vpif_suspend, + .resume = vpif_resume, +}; + +#define vpif_pm_ops (&vpif_pm) +#else +#define vpif_pm_ops NULL +#endif + +static struct platform_driver vpif_driver = { + .driver = { + .name = "vpif", + .owner = THIS_MODULE, + .pm = vpif_pm_ops, + }, + .remove = vpif_remove, + .probe = vpif_probe, +}; + +static void vpif_exit(void) +{ + platform_driver_unregister(&vpif_driver); +} + +static int __init vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} +subsys_initcall(vpif_init); +module_exit(vpif_exit); + diff --git a/drivers/media/platform/davinci/vpif.h b/drivers/media/platform/davinci/vpif.h new file mode 100644 index 00000000..9956e678 --- /dev/null +++ b/drivers/media/platform/davinci/vpif.h @@ -0,0 +1,688 @@ +/* + * VPIF header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VPIF_H +#define VPIF_H + +#include +#include +#include + +/* Maximum channel allowed */ +#define VPIF_NUM_CHANNELS (4) +#define VPIF_CAPTURE_NUM_CHANNELS (2) +#define VPIF_DISPLAY_NUM_CHANNELS (2) + +/* Macros to read/write registers */ +extern void __iomem *vpif_base; +extern spinlock_t vpif_lock; + +#define regr(reg) readl((reg) + vpif_base) +#define regw(value, reg) writel(value, (reg + vpif_base)) + +/* Register Address Offsets */ +#define VPIF_PID (0x0000) +#define VPIF_CH0_CTRL (0x0004) +#define VPIF_CH1_CTRL (0x0008) +#define VPIF_CH2_CTRL (0x000C) +#define VPIF_CH3_CTRL (0x0010) + +#define VPIF_INTEN (0x0020) +#define VPIF_INTEN_SET (0x0024) +#define VPIF_INTEN_CLR (0x0028) +#define VPIF_STATUS (0x002C) +#define VPIF_STATUS_CLR (0x0030) +#define VPIF_EMULATION_CTRL (0x0034) +#define VPIF_REQ_SIZE (0x0038) + +#define VPIF_CH0_TOP_STRT_ADD_LUMA (0x0040) +#define VPIF_CH0_BTM_STRT_ADD_LUMA (0x0044) +#define VPIF_CH0_TOP_STRT_ADD_CHROMA (0x0048) +#define VPIF_CH0_BTM_STRT_ADD_CHROMA (0x004c) +#define VPIF_CH0_TOP_STRT_ADD_HANC (0x0050) +#define VPIF_CH0_BTM_STRT_ADD_HANC (0x0054) +#define VPIF_CH0_TOP_STRT_ADD_VANC (0x0058) +#define VPIF_CH0_BTM_STRT_ADD_VANC (0x005c) +#define VPIF_CH0_SP_CFG (0x0060) +#define VPIF_CH0_IMG_ADD_OFST (0x0064) +#define VPIF_CH0_HANC_ADD_OFST (0x0068) +#define VPIF_CH0_H_CFG (0x006c) +#define VPIF_CH0_V_CFG_00 (0x0070) +#define VPIF_CH0_V_CFG_01 (0x0074) +#define VPIF_CH0_V_CFG_02 (0x0078) +#define VPIF_CH0_V_CFG_03 (0x007c) + +#define VPIF_CH1_TOP_STRT_ADD_LUMA (0x0080) +#define VPIF_CH1_BTM_STRT_ADD_LUMA (0x0084) +#define VPIF_CH1_TOP_STRT_ADD_CHROMA (0x0088) +#define VPIF_CH1_BTM_STRT_ADD_CHROMA (0x008c) +#define VPIF_CH1_TOP_STRT_ADD_HANC (0x0090) +#define VPIF_CH1_BTM_STRT_ADD_HANC (0x0094) +#define VPIF_CH1_TOP_STRT_ADD_VANC (0x0098) +#define VPIF_CH1_BTM_STRT_ADD_VANC (0x009c) +#define VPIF_CH1_SP_CFG (0x00a0) +#define VPIF_CH1_IMG_ADD_OFST (0x00a4) +#define VPIF_CH1_HANC_ADD_OFST (0x00a8) +#define VPIF_CH1_H_CFG (0x00ac) +#define VPIF_CH1_V_CFG_00 (0x00b0) +#define VPIF_CH1_V_CFG_01 (0x00b4) +#define VPIF_CH1_V_CFG_02 (0x00b8) +#define VPIF_CH1_V_CFG_03 (0x00bc) + +#define VPIF_CH2_TOP_STRT_ADD_LUMA (0x00c0) +#define VPIF_CH2_BTM_STRT_ADD_LUMA (0x00c4) +#define VPIF_CH2_TOP_STRT_ADD_CHROMA (0x00c8) +#define VPIF_CH2_BTM_STRT_ADD_CHROMA (0x00cc) +#define VPIF_CH2_TOP_STRT_ADD_HANC (0x00d0) +#define VPIF_CH2_BTM_STRT_ADD_HANC (0x00d4) +#define VPIF_CH2_TOP_STRT_ADD_VANC (0x00d8) +#define VPIF_CH2_BTM_STRT_ADD_VANC (0x00dc) +#define VPIF_CH2_SP_CFG (0x00e0) +#define VPIF_CH2_IMG_ADD_OFST (0x00e4) +#define VPIF_CH2_HANC_ADD_OFST (0x00e8) +#define VPIF_CH2_H_CFG (0x00ec) +#define VPIF_CH2_V_CFG_00 (0x00f0) +#define VPIF_CH2_V_CFG_01 (0x00f4) +#define VPIF_CH2_V_CFG_02 (0x00f8) +#define VPIF_CH2_V_CFG_03 (0x00fc) +#define VPIF_CH2_HANC0_STRT (0x0100) +#define VPIF_CH2_HANC0_SIZE (0x0104) +#define VPIF_CH2_HANC1_STRT (0x0108) +#define VPIF_CH2_HANC1_SIZE (0x010c) +#define VPIF_CH2_VANC0_STRT (0x0110) +#define VPIF_CH2_VANC0_SIZE (0x0114) +#define VPIF_CH2_VANC1_STRT (0x0118) +#define VPIF_CH2_VANC1_SIZE (0x011c) + +#define VPIF_CH3_TOP_STRT_ADD_LUMA (0x0140) +#define VPIF_CH3_BTM_STRT_ADD_LUMA (0x0144) +#define VPIF_CH3_TOP_STRT_ADD_CHROMA (0x0148) +#define VPIF_CH3_BTM_STRT_ADD_CHROMA (0x014c) +#define VPIF_CH3_TOP_STRT_ADD_HANC (0x0150) +#define VPIF_CH3_BTM_STRT_ADD_HANC (0x0154) +#define VPIF_CH3_TOP_STRT_ADD_VANC (0x0158) +#define VPIF_CH3_BTM_STRT_ADD_VANC (0x015c) +#define VPIF_CH3_SP_CFG (0x0160) +#define VPIF_CH3_IMG_ADD_OFST (0x0164) +#define VPIF_CH3_HANC_ADD_OFST (0x0168) +#define VPIF_CH3_H_CFG (0x016c) +#define VPIF_CH3_V_CFG_00 (0x0170) +#define VPIF_CH3_V_CFG_01 (0x0174) +#define VPIF_CH3_V_CFG_02 (0x0178) +#define VPIF_CH3_V_CFG_03 (0x017c) +#define VPIF_CH3_HANC0_STRT (0x0180) +#define VPIF_CH3_HANC0_SIZE (0x0184) +#define VPIF_CH3_HANC1_STRT (0x0188) +#define VPIF_CH3_HANC1_SIZE (0x018c) +#define VPIF_CH3_VANC0_STRT (0x0190) +#define VPIF_CH3_VANC0_SIZE (0x0194) +#define VPIF_CH3_VANC1_STRT (0x0198) +#define VPIF_CH3_VANC1_SIZE (0x019c) + +#define VPIF_IODFT_CTRL (0x01c0) + +/* Functions for bit Manipulation */ +static inline void vpif_set_bit(u32 reg, u32 bit) +{ + regw((regr(reg)) | (0x01 << bit), reg); +} + +static inline void vpif_clr_bit(u32 reg, u32 bit) +{ + regw(((regr(reg)) & ~(0x01 << bit)), reg); +} + +/* Macro for Generating mask */ +#ifdef GENERATE_MASK +#undef GENERATE_MASK +#endif + +#define GENERATE_MASK(bits, pos) \ + ((((0xFFFFFFFF) << (32 - bits)) >> (32 - bits)) << pos) + +/* Bit positions in the channel control registers */ +#define VPIF_CH_DATA_MODE_BIT (2) +#define VPIF_CH_YC_MUX_BIT (3) +#define VPIF_CH_SDR_FMT_BIT (4) +#define VPIF_CH_HANC_EN_BIT (8) +#define VPIF_CH_VANC_EN_BIT (9) + +#define VPIF_CAPTURE_CH_NIP (10) +#define VPIF_DISPLAY_CH_NIP (11) + +#define VPIF_DISPLAY_PIX_EN_BIT (10) + +#define VPIF_CH_INPUT_FIELD_FRAME_BIT (12) + +#define VPIF_CH_FID_POLARITY_BIT (15) +#define VPIF_CH_V_VALID_POLARITY_BIT (14) +#define VPIF_CH_H_VALID_POLARITY_BIT (13) +#define VPIF_CH_DATA_WIDTH_BIT (28) + +#define VPIF_CH_CLK_EDGE_CTRL_BIT (31) + +/* Mask various length */ +#define VPIF_CH_EAVSAV_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_MASK GENERATE_MASK(12, 0) +#define VPIF_CH_WIDTH_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_SHIFT (16) + +/* VPIF masks for registers */ +#define VPIF_REQ_SIZE_MASK (0x1ff) + +/* bit posotion of interrupt vpif_ch_intr register */ +#define VPIF_INTEN_FRAME_CH0 (0x00000001) +#define VPIF_INTEN_FRAME_CH1 (0x00000002) +#define VPIF_INTEN_FRAME_CH2 (0x00000004) +#define VPIF_INTEN_FRAME_CH3 (0x00000008) + +/* bit position of clock and channel enable in vpif_chn_ctrl register */ + +#define VPIF_CH0_CLK_EN (0x00000002) +#define VPIF_CH0_EN (0x00000001) +#define VPIF_CH1_CLK_EN (0x00000002) +#define VPIF_CH1_EN (0x00000001) +#define VPIF_CH2_CLK_EN (0x00000002) +#define VPIF_CH2_EN (0x00000001) +#define VPIF_CH3_CLK_EN (0x00000002) +#define VPIF_CH3_EN (0x00000001) +#define VPIF_CH_CLK_EN (0x00000002) +#define VPIF_CH_EN (0x00000001) + +#define VPIF_INT_TOP (0x00) +#define VPIF_INT_BOTTOM (0x01) +#define VPIF_INT_BOTH (0x02) + +#define VPIF_CH0_INT_CTRL_SHIFT (6) +#define VPIF_CH1_INT_CTRL_SHIFT (6) +#define VPIF_CH2_INT_CTRL_SHIFT (6) +#define VPIF_CH3_INT_CTRL_SHIFT (6) +#define VPIF_CH_INT_CTRL_SHIFT (6) + +#define VPIF_CH2_CLIP_ANC_EN 14 +#define VPIF_CH2_CLIP_ACTIVE_EN 13 + +#define VPIF_CH3_CLIP_ANC_EN 14 +#define VPIF_CH3_CLIP_ACTIVE_EN 13 + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel0_intr_assert() (regw((regr(VPIF_CH0_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel1_intr_assert() (regw((regr(VPIF_CH1_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH1_INT_CTRL_SHIFT)), VPIF_CH1_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel2_intr_assert() (regw((regr(VPIF_CH2_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH2_INT_CTRL_SHIFT)), VPIF_CH2_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel3_intr_assert() (regw((regr(VPIF_CH3_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH3_INT_CTRL_SHIFT)), VPIF_CH3_CTRL)) + +#define VPIF_CH_FID_MASK (0x20) +#define VPIF_CH_FID_SHIFT (5) + +#define VPIF_NTSC_VBI_START_FIELD0 (1) +#define VPIF_NTSC_VBI_START_FIELD1 (263) +#define VPIF_PAL_VBI_START_FIELD0 (624) +#define VPIF_PAL_VBI_START_FIELD1 (311) + +#define VPIF_NTSC_HBI_START_FIELD0 (1) +#define VPIF_NTSC_HBI_START_FIELD1 (263) +#define VPIF_PAL_HBI_START_FIELD0 (624) +#define VPIF_PAL_HBI_START_FIELD1 (311) + +#define VPIF_NTSC_VBI_COUNT_FIELD0 (20) +#define VPIF_NTSC_VBI_COUNT_FIELD1 (19) +#define VPIF_PAL_VBI_COUNT_FIELD0 (24) +#define VPIF_PAL_VBI_COUNT_FIELD1 (25) + +#define VPIF_NTSC_HBI_COUNT_FIELD0 (263) +#define VPIF_NTSC_HBI_COUNT_FIELD1 (262) +#define VPIF_PAL_HBI_COUNT_FIELD0 (312) +#define VPIF_PAL_HBI_COUNT_FIELD1 (313) + +#define VPIF_NTSC_VBI_SAMPLES_PER_LINE (720) +#define VPIF_PAL_VBI_SAMPLES_PER_LINE (720) +#define VPIF_NTSC_HBI_SAMPLES_PER_LINE (268) +#define VPIF_PAL_HBI_SAMPLES_PER_LINE (280) + +#define VPIF_CH_VANC_EN (0x20) +#define VPIF_DMA_REQ_SIZE (0x080) +#define VPIF_EMULATION_DISABLE (0x01) + +extern u8 irq_vpif_capture_channel[VPIF_NUM_CHANNELS]; + +/* inline function to enable/disable channel0 */ +static inline void enable_channel0(int enable) +{ + if (enable) + regw((regr(VPIF_CH0_CTRL) | (VPIF_CH0_EN)), VPIF_CH0_CTRL); + else + regw((regr(VPIF_CH0_CTRL) & (~VPIF_CH0_EN)), VPIF_CH0_CTRL); +} + +/* inline function to enable/disable channel1 */ +static inline void enable_channel1(int enable) +{ + if (enable) + regw((regr(VPIF_CH1_CTRL) | (VPIF_CH1_EN)), VPIF_CH1_CTRL); + else + regw((regr(VPIF_CH1_CTRL) & (~VPIF_CH1_EN)), VPIF_CH1_CTRL); +} + +/* inline function to enable interrupt for channel0 */ +static inline void channel0_intr_enable(int enable) +{ + unsigned long flags; + + spin_lock_irqsave(&vpif_lock, flags); + + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH0), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH0)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } + spin_unlock_irqrestore(&vpif_lock, flags); +} + +/* inline function to enable interrupt for channel1 */ +static inline void channel1_intr_enable(int enable) +{ + unsigned long flags; + + spin_lock_irqsave(&vpif_lock, flags); + + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH1), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH1)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } + spin_unlock_irqrestore(&vpif_lock, flags); +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch0_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch0_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH0_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH0_BTM_STRT_ADD_CHROMA); +} + +static inline void ch1_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + + regw(top_strt_luma, VPIF_CH1_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH1_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +static inline void ch0_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_VANC); +} + +static inline void ch0_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_HANC); +} + +static inline void ch1_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_VANC); +} + +static inline void ch1_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_HANC); +} + +/* Inline function to enable raw vbi in the given channel */ +static inline void disable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_clr_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_clr_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +static inline void enable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_set_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_set_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +/* inline function to enable/disable channel2 */ +static inline void enable_channel2(int enable) +{ + if (enable) { + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_EN)), VPIF_CH2_CTRL); + } else { + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_EN)), VPIF_CH2_CTRL); + } +} + +/* inline function to enable/disable channel3 */ +static inline void enable_channel3(int enable) +{ + if (enable) { + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_EN)), VPIF_CH3_CTRL); + } else { + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_EN)), VPIF_CH3_CTRL); + } +} + +/* inline function to enable interrupt for channel2 */ +static inline void channel2_intr_enable(int enable) +{ + unsigned long flags; + + spin_lock_irqsave(&vpif_lock, flags); + + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH2), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH2)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } + spin_unlock_irqrestore(&vpif_lock, flags); +} + +/* inline function to enable interrupt for channel3 */ +static inline void channel3_intr_enable(int enable) +{ + unsigned long flags; + + spin_lock_irqsave(&vpif_lock, flags); + + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH3), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH3)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } + spin_unlock_irqrestore(&vpif_lock, flags); +} + +/* inline function to enable raw vbi data for channel2 */ +static inline void channel2_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH2_CTRL, mask); + else + vpif_clr_bit(VPIF_CH2_CTRL, mask); +} + +/* inline function to enable raw vbi data for channel3*/ +static inline void channel3_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH3_CTRL, mask); + else + vpif_clr_bit(VPIF_CH3_CTRL, mask); +} + +/* function to enable clipping (for both active and blanking regions) on ch 2 */ +static inline void channel2_clipping_enable(int enable) +{ + if (enable) { + vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN); + vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN); + } else { + vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN); + vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN); + } +} + +/* function to enable clipping (for both active and blanking regions) on ch 3 */ +static inline void channel3_clipping_enable(int enable) +{ + if (enable) { + vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN); + vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN); + } else { + vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN); + vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN); + } +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch2_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH2_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH2_BTM_STRT_ADD_CHROMA); +} + +static inline void ch3_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for vbi data */ +static inline void ch2_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_VANC); +} + +static inline void ch3_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_VANC); +} + +static inline int vpif_intr_status(int channel) +{ + int status = 0; + int mask; + + if (channel < 0 || channel > 3) + return 0; + + mask = 1 << channel; + status = regr(VPIF_STATUS) & mask; + regw(status, VPIF_STATUS_CLR); + + return status; +} + +#define VPIF_MAX_NAME (30) + +/* This structure will store size parameters as per the mode selected by user */ +struct vpif_channel_config_params { + char name[VPIF_MAX_NAME]; /* Name of the mode */ + u16 width; /* Indicates width of the image */ + u16 height; /* Indicates height of the image */ + u8 frm_fmt; /* Interlaced (0) or progressive (1) */ + u8 ycmux_mode; /* This mode requires one (0) or two (1) + channels */ + u16 eav2sav; /* length of eav 2 sav */ + u16 sav2eav; /* length of sav 2 eav */ + u16 l1, l3, l5, l7, l9, l11; /* Other parameter configurations */ + u16 vsize; /* Vertical size of the image */ + u8 capture_format; /* Indicates whether capture format + * is in BT or in CCD/CMOS */ + u8 vbi_supported; /* Indicates whether this mode + * supports capturing vbi or not */ + u8 hd_sd; /* HDTV (1) or SDTV (0) format */ + v4l2_std_id stdid; /* SDTV format */ + struct v4l2_dv_timings dv_timings; /* HDTV format */ +}; + +extern const unsigned int vpif_ch_params_count; +extern const struct vpif_channel_config_params vpif_ch_params[]; + +struct vpif_video_params; +struct vpif_params; +struct vpif_vbi_params; + +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id); +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id); +int vpif_channel_getfid(u8 channel_id); + +enum data_size { + _8BITS = 0, + _10BITS, + _12BITS, +}; + +/* Structure for vpif parameters for raw vbi data */ +struct vpif_vbi_params { + __u32 hstart0; /* Horizontal start of raw vbi data for first field */ + __u32 vstart0; /* Vertical start of raw vbi data for first field */ + __u32 hsize0; /* Horizontal size of raw vbi data for first field */ + __u32 vsize0; /* Vertical size of raw vbi data for first field */ + __u32 hstart1; /* Horizontal start of raw vbi data for second field */ + __u32 vstart1; /* Vertical start of raw vbi data for second field */ + __u32 hsize1; /* Horizontal size of raw vbi data for second field */ + __u32 vsize1; /* Vertical size of raw vbi data for second field */ +}; + +/* structure for vpif parameters */ +struct vpif_video_params { + __u8 storage_mode; /* Indicates field or frame mode */ + unsigned long hpitch; + v4l2_std_id stdid; +}; + +struct vpif_params { + struct vpif_interface iface; + struct vpif_video_params video_params; + struct vpif_channel_config_params std_info; + union param { + struct vpif_vbi_params vbi_params; + enum data_size data_sz; + } params; +}; + +#endif /* End of #ifndef VPIF_H */ + diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c new file mode 100644 index 00000000..5f98df1f --- /dev/null +++ b/drivers/media/platform/davinci/vpif_capture.c @@ -0,0 +1,2382 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * TODO : add support for VBI & HBI data service + * add static buffer allocation + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vpif_capture.h" +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VPIF_CAPTURE_VERSION); + +#define vpif_err(fmt, arg...) v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg) +#define vpif_dbg(level, debug, fmt, arg...) \ + v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg) + +static int debug = 1; +static u32 ch0_numbuffers = 3; +static u32 ch1_numbuffers = 3; +static u32 ch0_bufsize = 1920 * 1080 * 2; +static u32 ch1_bufsize = 720 * 576 * 2; + +module_param(debug, int, 0644); +module_param(ch0_numbuffers, uint, S_IRUGO); +module_param(ch1_numbuffers, uint, S_IRUGO); +module_param(ch0_bufsize, uint, S_IRUGO); +module_param(ch1_bufsize, uint, S_IRUGO); + +MODULE_PARM_DESC(debug, "Debug level 0-1"); +MODULE_PARM_DESC(ch2_numbuffers, "Channel0 buffer count (default:3)"); +MODULE_PARM_DESC(ch3_numbuffers, "Channel1 buffer count (default:3)"); +MODULE_PARM_DESC(ch2_bufsize, "Channel0 buffer size (default:1920 x 1080 x 2)"); +MODULE_PARM_DESC(ch3_bufsize, "Channel1 buffer size (default:720 x 576 x 2)"); + +static struct vpif_config_params config_params = { + .min_numbuffers = 3, + .numbuffers[0] = 3, + .numbuffers[1] = 3, + .min_bufsize[0] = 720 * 480 * 2, + .min_bufsize[1] = 720 * 480 * 2, + .channel_bufsize[0] = 1920 * 1080 * 2, + .channel_bufsize[1] = 720 * 576 * 2, +}; + +/* global variables */ +static struct vpif_device vpif_obj = { {NULL} }; +static struct device *vpif_dev; +static void vpif_calculate_offsets(struct channel_obj *ch); +static void vpif_config_addr(struct channel_obj *ch, int muxmode); + +/** + * buffer_prepare : callback function for buffer prepare + * @vb: ptr to vb2_buffer + * + * This is the callback function for buffer prepare when vb2_qbuf() + * function is called. The buffer is prepared and user space virtual address + * or user address is converted into physical address + */ +static int vpif_buffer_prepare(struct vb2_buffer *vb) +{ + /* Get the file handle object and channel object */ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_queue *q = vb->vb2_queue; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long addr; + + vpif_dbg(2, debug, "vpif_buffer_prepare\n"); + + common = &ch->common[VPIF_VIDEO_INDEX]; + + if (vb->state != VB2_BUF_STATE_ACTIVE && + vb->state != VB2_BUF_STATE_PREPARED) { + vb2_set_plane_payload(vb, 0, common->fmt.fmt.pix.sizeimage); + if (vb2_plane_vaddr(vb, 0) && + vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) + goto exit; + addr = vb2_dma_contig_plane_dma_addr(vb, 0); + + if (q->streaming) { + if (!IS_ALIGNED((addr + common->ytop_off), 8) || + !IS_ALIGNED((addr + common->ybtm_off), 8) || + !IS_ALIGNED((addr + common->ctop_off), 8) || + !IS_ALIGNED((addr + common->cbtm_off), 8)) + goto exit; + } + } + return 0; +exit: + vpif_dbg(1, debug, "buffer_prepare:offset is not aligned to 8 bytes\n"); + return -EINVAL; +} + +/** + * vpif_buffer_queue_setup : Callback function for buffer setup. + * @vq: vb2_queue ptr + * @fmt: v4l2 format + * @nbuffers: ptr to number of buffers requested by application + * @nplanes:: contains number of distinct video planes needed to hold a frame + * @sizes[]: contains the size (in bytes) of each plane. + * @alloc_ctxs: ptr to allocation context + * + * This callback function is called when reqbuf() is called to adjust + * the buffer count and buffer size + */ +static int vpif_buffer_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + /* Get the file handle object and channel object */ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long size; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_buffer_setup\n"); + + /* If memory type is not mmap, return */ + if (V4L2_MEMORY_MMAP == common->memory) { + /* Calculate the size of the buffer */ + size = config_params.channel_bufsize[ch->channel_id]; + /* + * Checking if the buffer size exceeds the available buffer + * ycmux_mode = 0 means 1 channel mode HD and + * ycmux_mode = 1 means 2 channels mode SD + */ + if (ch->vpifparams.std_info.ycmux_mode == 0) { + if (config_params.video_limit[ch->channel_id]) + while (size * *nbuffers > + (config_params.video_limit[0] + + config_params.video_limit[1])) + (*nbuffers)--; + } else { + if (config_params.video_limit[ch->channel_id]) + while (size * *nbuffers > + config_params.video_limit[ch->channel_id]) + (*nbuffers)--; + } + + } else { + size = common->fmt.fmt.pix.sizeimage; + } + + if (*nbuffers < config_params.min_numbuffers) + *nbuffers = config_params.min_numbuffers; + + *nplanes = 1; + sizes[0] = size; + alloc_ctxs[0] = common->alloc_ctx; + + return 0; +} + +/** + * vpif_buffer_queue : Callback function to add buffer to DMA queue + * @vb: ptr to vb2_buffer + */ +static void vpif_buffer_queue(struct vb2_buffer *vb) +{ + /* Get the file handle object and channel object */ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct channel_obj *ch = fh->channel; + struct vpif_cap_buffer *buf = container_of(vb, + struct vpif_cap_buffer, vb); + struct common_obj *common; + unsigned long flags; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_buffer_queue\n"); + + spin_lock_irqsave(&common->irqlock, flags); + /* add the buffer to the DMA queue */ + list_add_tail(&buf->list, &common->dma_queue); + spin_unlock_irqrestore(&common->irqlock, flags); +} + +/** + * vpif_buf_cleanup : Callback function to free buffer + * @vb: ptr to vb2_buffer + * + * This function is called from the videobuf2 layer to free memory + * allocated to the buffers + */ +static void vpif_buf_cleanup(struct vb2_buffer *vb) +{ + /* Get the file handle object and channel object */ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vpif_cap_buffer *buf = container_of(vb, + struct vpif_cap_buffer, vb); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long flags; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + spin_lock_irqsave(&common->irqlock, flags); + if (vb->state == VB2_BUF_STATE_ACTIVE) + list_del_init(&buf->list); + spin_unlock_irqrestore(&common->irqlock, flags); + +} + +static void vpif_wait_prepare(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_unlock(&common->lock); +} + +static void vpif_wait_finish(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); +} + +static int vpif_buffer_init(struct vb2_buffer *vb) +{ + struct vpif_cap_buffer *buf = container_of(vb, + struct vpif_cap_buffer, vb); + + INIT_LIST_HEAD(&buf->list); + + return 0; +} + +static u8 channel_first_int[VPIF_NUMBER_OF_OBJECTS][2] = + { {1, 1} }; + +static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct vpif_capture_config *vpif_config_data = + vpif_dev->platform_data; + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpif = &ch->vpifparams; + unsigned long addr = 0; + unsigned long flags; + int ret; + + /* If buffer queue is empty, return error */ + spin_lock_irqsave(&common->irqlock, flags); + if (list_empty(&common->dma_queue)) { + spin_unlock_irqrestore(&common->irqlock, flags); + vpif_dbg(1, debug, "buffer queue is empty\n"); + return -EIO; + } + + /* Get the next frame from the buffer queue */ + common->cur_frm = common->next_frm = list_entry(common->dma_queue.next, + struct vpif_cap_buffer, list); + /* Remove buffer from the buffer queue */ + list_del(&common->cur_frm->list); + spin_unlock_irqrestore(&common->irqlock, flags); + /* Mark state of the current frame to active */ + common->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE; + /* Initialize field_id and started member */ + ch->field_id = 0; + common->started = 1; + addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0); + + /* Calculate the offset for Y and C data in the buffer */ + vpif_calculate_offsets(ch); + + if ((vpif->std_info.frm_fmt && + ((common->fmt.fmt.pix.field != V4L2_FIELD_NONE) && + (common->fmt.fmt.pix.field != V4L2_FIELD_ANY))) || + (!vpif->std_info.frm_fmt && + (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) { + vpif_dbg(1, debug, "conflict in field format and std format\n"); + return -EINVAL; + } + + /* configure 1 or 2 channel mode */ + if (vpif_config_data->setup_input_channel_mode) { + ret = vpif_config_data-> + setup_input_channel_mode(vpif->std_info.ycmux_mode); + if (ret < 0) { + vpif_dbg(1, debug, "can't set vpif channel mode\n"); + return ret; + } + } + + /* Call vpif_set_params function to set the parameters and addresses */ + ret = vpif_set_video_params(vpif, ch->channel_id); + + if (ret < 0) { + vpif_dbg(1, debug, "can't set video params\n"); + return ret; + } + + common->started = ret; + vpif_config_addr(ch, ret); + + common->set_addr(addr + common->ytop_off, + addr + common->ybtm_off, + addr + common->ctop_off, + addr + common->cbtm_off); + + /** + * Set interrupt for both the fields in VPIF Register enable channel in + * VPIF register + */ + channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id)) { + channel0_intr_assert(); + channel0_intr_enable(1); + enable_channel0(1); + } + if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) || + (common->started == 2)) { + channel1_intr_assert(); + channel1_intr_enable(1); + enable_channel1(1); + } + + return 0; +} + +/* abort streaming and wait for last buffer */ +static int vpif_stop_streaming(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long flags; + + if (!vb2_is_streaming(vq)) + return 0; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + /* release all active buffers */ + spin_lock_irqsave(&common->irqlock, flags); + while (!list_empty(&common->dma_queue)) { + common->next_frm = list_entry(common->dma_queue.next, + struct vpif_cap_buffer, list); + list_del(&common->next_frm->list); + vb2_buffer_done(&common->next_frm->vb, VB2_BUF_STATE_ERROR); + } + spin_unlock_irqrestore(&common->irqlock, flags); + + return 0; +} + +static struct vb2_ops video_qops = { + .queue_setup = vpif_buffer_queue_setup, + .wait_prepare = vpif_wait_prepare, + .wait_finish = vpif_wait_finish, + .buf_init = vpif_buffer_init, + .buf_prepare = vpif_buffer_prepare, + .start_streaming = vpif_start_streaming, + .stop_streaming = vpif_stop_streaming, + .buf_cleanup = vpif_buf_cleanup, + .buf_queue = vpif_buffer_queue, +}; + +/** + * vpif_process_buffer_complete: process a completed buffer + * @common: ptr to common channel object + * + * This function time stamp the buffer and mark it as DONE. It also + * wake up any process waiting on the QUEUE and set the next buffer + * as current + */ +static void vpif_process_buffer_complete(struct common_obj *common) +{ + v4l2_get_timestamp(&common->cur_frm->vb.v4l2_buf.timestamp); + vb2_buffer_done(&common->cur_frm->vb, + VB2_BUF_STATE_DONE); + /* Make curFrm pointing to nextFrm */ + common->cur_frm = common->next_frm; +} + +/** + * vpif_schedule_next_buffer: set next buffer address for capture + * @common : ptr to common channel object + * + * This function will get next buffer from the dma queue and + * set the buffer address in the vpif register for capture. + * the buffer is marked active + */ +static void vpif_schedule_next_buffer(struct common_obj *common) +{ + unsigned long addr = 0; + + spin_lock(&common->irqlock); + common->next_frm = list_entry(common->dma_queue.next, + struct vpif_cap_buffer, list); + /* Remove that buffer from the buffer queue */ + list_del(&common->next_frm->list); + spin_unlock(&common->irqlock); + common->next_frm->vb.state = VB2_BUF_STATE_ACTIVE; + addr = vb2_dma_contig_plane_dma_addr(&common->next_frm->vb, 0); + + /* Set top and bottom field addresses in VPIF registers */ + common->set_addr(addr + common->ytop_off, + addr + common->ybtm_off, + addr + common->ctop_off, + addr + common->cbtm_off); +} + +/** + * vpif_channel_isr : ISR handler for vpif capture + * @irq: irq number + * @dev_id: dev_id ptr + * + * It changes status of the captured buffer, takes next buffer from the queue + * and sets its address in VPIF registers + */ +static irqreturn_t vpif_channel_isr(int irq, void *dev_id) +{ + struct vpif_device *dev = &vpif_obj; + struct common_obj *common; + struct channel_obj *ch; + enum v4l2_field field; + int channel_id = 0; + int fid = -1, i; + + channel_id = *(int *)(dev_id); + if (!vpif_intr_status(channel_id)) + return IRQ_NONE; + + ch = dev->dev[channel_id]; + + field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field; + + for (i = 0; i < VPIF_NUMBER_OF_OBJECTS; i++) { + common = &ch->common[i]; + /* skip If streaming is not started in this channel */ + if (0 == common->started) + continue; + + /* Check the field format */ + if (1 == ch->vpifparams.std_info.frm_fmt) { + /* Progressive mode */ + spin_lock(&common->irqlock); + if (list_empty(&common->dma_queue)) { + spin_unlock(&common->irqlock); + continue; + } + spin_unlock(&common->irqlock); + + if (!channel_first_int[i][channel_id]) + vpif_process_buffer_complete(common); + + channel_first_int[i][channel_id] = 0; + + vpif_schedule_next_buffer(common); + + + channel_first_int[i][channel_id] = 0; + } else { + /** + * Interlaced mode. If it is first interrupt, ignore + * it + */ + if (channel_first_int[i][channel_id]) { + channel_first_int[i][channel_id] = 0; + continue; + } + if (0 == i) { + ch->field_id ^= 1; + /* Get field id from VPIF registers */ + fid = vpif_channel_getfid(ch->channel_id); + if (fid != ch->field_id) { + /** + * If field id does not match stored + * field id, make them in sync + */ + if (0 == fid) + ch->field_id = fid; + return IRQ_HANDLED; + } + } + /* device field id and local field id are in sync */ + if (0 == fid) { + /* this is even field */ + if (common->cur_frm == common->next_frm) + continue; + + /* mark the current buffer as done */ + vpif_process_buffer_complete(common); + } else if (1 == fid) { + /* odd field */ + spin_lock(&common->irqlock); + if (list_empty(&common->dma_queue) || + (common->cur_frm != common->next_frm)) { + spin_unlock(&common->irqlock); + continue; + } + spin_unlock(&common->irqlock); + + vpif_schedule_next_buffer(common); + } + } + } + return IRQ_HANDLED; +} + +/** + * vpif_update_std_info() - update standard related info + * @ch: ptr to channel object + * + * For a given standard selected by application, update values + * in the device data structures + */ +static int vpif_update_std_info(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpifparams = &ch->vpifparams; + const struct vpif_channel_config_params *config; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + int index; + + vpif_dbg(2, debug, "vpif_update_std_info\n"); + + for (index = 0; index < vpif_ch_params_count; index++) { + config = &vpif_ch_params[index]; + if (config->hd_sd == 0) { + vpif_dbg(2, debug, "SD format\n"); + if (config->stdid & vid_ch->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } else { + vpif_dbg(2, debug, "HD format\n"); + if (!memcmp(&config->dv_timings, &vid_ch->dv_timings, + sizeof(vid_ch->dv_timings))) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } + } + + /* standard not found */ + if (index == vpif_ch_params_count) + return -EINVAL; + + common->fmt.fmt.pix.width = std_info->width; + common->width = std_info->width; + common->fmt.fmt.pix.height = std_info->height; + common->height = std_info->height; + common->fmt.fmt.pix.bytesperline = std_info->width; + vpifparams->video_params.hpitch = std_info->width; + vpifparams->video_params.storage_mode = std_info->frm_fmt; + + return 0; +} + +/** + * vpif_calculate_offsets : This function calculates buffers offsets + * @ch : ptr to channel object + * + * This function calculates buffer offsets for Y and C in the top and + * bottom field + */ +static void vpif_calculate_offsets(struct channel_obj *ch) +{ + unsigned int hpitch, vpitch, sizeimage; + struct video_obj *vid_ch = &(ch->video); + struct vpif_params *vpifparams = &ch->vpifparams; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + enum v4l2_field field = common->fmt.fmt.pix.field; + + vpif_dbg(2, debug, "vpif_calculate_offsets\n"); + + if (V4L2_FIELD_ANY == field) { + if (vpifparams->std_info.frm_fmt) + vid_ch->buf_field = V4L2_FIELD_NONE; + else + vid_ch->buf_field = V4L2_FIELD_INTERLACED; + } else + vid_ch->buf_field = common->fmt.fmt.pix.field; + + sizeimage = common->fmt.fmt.pix.sizeimage; + + hpitch = common->fmt.fmt.pix.bytesperline; + vpitch = sizeimage / (hpitch * 2); + + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + /* Calculate offsets for Y top, Y Bottom, C top and C Bottom */ + common->ytop_off = 0; + common->ybtm_off = hpitch; + common->ctop_off = sizeimage / 2; + common->cbtm_off = sizeimage / 2 + hpitch; + } else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) { + /* Calculate offsets for Y top, Y Bottom, C top and C Bottom */ + common->ytop_off = 0; + common->ybtm_off = sizeimage / 4; + common->ctop_off = sizeimage / 2; + common->cbtm_off = common->ctop_off + sizeimage / 4; + } else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) { + /* Calculate offsets for Y top, Y Bottom, C top and C Bottom */ + common->ybtm_off = 0; + common->ytop_off = sizeimage / 4; + common->cbtm_off = sizeimage / 2; + common->ctop_off = common->cbtm_off + sizeimage / 4; + } + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) + vpifparams->video_params.storage_mode = 1; + else + vpifparams->video_params.storage_mode = 0; + + if (1 == vpifparams->std_info.frm_fmt) + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + else { + if ((field == V4L2_FIELD_ANY) + || (field == V4L2_FIELD_INTERLACED)) + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline * 2; + else + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } + + ch->vpifparams.video_params.stdid = vpifparams->std_info.stdid; +} + +/** + * vpif_config_format: configure default frame format in the device + * ch : ptr to channel object + */ +static void vpif_config_format(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_config_format\n"); + + common->fmt.fmt.pix.field = V4L2_FIELD_ANY; + if (config_params.numbuffers[ch->channel_id] == 0) + common->memory = V4L2_MEMORY_USERPTR; + else + common->memory = V4L2_MEMORY_MMAP; + + common->fmt.fmt.pix.sizeimage + = config_params.channel_bufsize[ch->channel_id]; + + if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER) + common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8; + else + common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P; + common->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; +} + +/** + * vpif_get_default_field() - Get default field type based on interface + * @vpif_params - ptr to vpif params + */ +static inline enum v4l2_field vpif_get_default_field( + struct vpif_interface *iface) +{ + return (iface->if_type == VPIF_IF_RAW_BAYER) ? V4L2_FIELD_NONE : + V4L2_FIELD_INTERLACED; +} + +/** + * vpif_check_format() - check given pixel format for compatibility + * @ch - channel ptr + * @pixfmt - Given pixel format + * @update - update the values as per hardware requirement + * + * Check the application pixel format for S_FMT and update the input + * values as per hardware limits for TRY_FMT. The default pixel and + * field format is selected based on interface type. + */ +static int vpif_check_format(struct channel_obj *ch, + struct v4l2_pix_format *pixfmt, + int update) +{ + struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + struct vpif_params *vpif_params = &ch->vpifparams; + enum v4l2_field field = pixfmt->field; + u32 sizeimage, hpitch, vpitch; + int ret = -EINVAL; + + vpif_dbg(2, debug, "vpif_check_format\n"); + /** + * first check for the pixel format. If if_type is Raw bayer, + * only V4L2_PIX_FMT_SBGGR8 format is supported. Otherwise only + * V4L2_PIX_FMT_YUV422P is supported + */ + if (vpif_params->iface.if_type == VPIF_IF_RAW_BAYER) { + if (pixfmt->pixelformat != V4L2_PIX_FMT_SBGGR8) { + if (!update) { + vpif_dbg(2, debug, "invalid pix format\n"); + goto exit; + } + pixfmt->pixelformat = V4L2_PIX_FMT_SBGGR8; + } + } else { + if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) { + if (!update) { + vpif_dbg(2, debug, "invalid pixel format\n"); + goto exit; + } + pixfmt->pixelformat = V4L2_PIX_FMT_YUV422P; + } + } + + if (!(VPIF_VALID_FIELD(field))) { + if (!update) { + vpif_dbg(2, debug, "invalid field format\n"); + goto exit; + } + /** + * By default use FIELD_NONE for RAW Bayer capture + * and FIELD_INTERLACED for other interfaces + */ + field = vpif_get_default_field(&vpif_params->iface); + } else if (field == V4L2_FIELD_ANY) + /* unsupported field. Use default */ + field = vpif_get_default_field(&vpif_params->iface); + + /* validate the hpitch */ + hpitch = pixfmt->bytesperline; + if (hpitch < vpif_params->std_info.width) { + if (!update) { + vpif_dbg(2, debug, "invalid hpitch\n"); + goto exit; + } + hpitch = vpif_params->std_info.width; + } + + sizeimage = pixfmt->sizeimage; + + vpitch = sizeimage / (hpitch * 2); + + /* validate the vpitch */ + if (vpitch < vpif_params->std_info.height) { + if (!update) { + vpif_dbg(2, debug, "Invalid vpitch\n"); + goto exit; + } + vpitch = vpif_params->std_info.height; + } + + /* Check for 8 byte alignment */ + if (!ALIGN(hpitch, 8)) { + if (!update) { + vpif_dbg(2, debug, "invalid pitch alignment\n"); + goto exit; + } + /* adjust to next 8 byte boundary */ + hpitch = (((hpitch + 7) / 8) * 8); + } + /* if update is set, modify the bytesperline and sizeimage */ + if (update) { + pixfmt->bytesperline = hpitch; + pixfmt->sizeimage = hpitch * vpitch * 2; + } + /** + * Image width and height is always based on current standard width and + * height + */ + pixfmt->width = common->fmt.fmt.pix.width; + pixfmt->height = common->fmt.fmt.pix.height; + return 0; +exit: + return ret; +} + +/** + * vpif_config_addr() - function to configure buffer address in vpif + * @ch - channel ptr + * @muxmode - channel mux mode + */ +static void vpif_config_addr(struct channel_obj *ch, int muxmode) +{ + struct common_obj *common; + + vpif_dbg(2, debug, "vpif_config_addr\n"); + + common = &(ch->common[VPIF_VIDEO_INDEX]); + + if (VPIF_CHANNEL1_VIDEO == ch->channel_id) + common->set_addr = ch1_set_videobuf_addr; + else if (2 == muxmode) + common->set_addr = ch0_set_videobuf_addr_yc_nmux; + else + common->set_addr = ch0_set_videobuf_addr; +} + +/** + * vpif_mmap : It is used to map kernel space buffers into user spaces + * @filep: file pointer + * @vma: ptr to vm_area_struct + */ +static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) +{ + /* Get the channel object and file handle object */ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + int ret; + + vpif_dbg(2, debug, "vpif_mmap\n"); + + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + ret = vb2_mmap(&common->buffer_queue, vma); + mutex_unlock(&common->lock); + return ret; +} + +/** + * vpif_poll: It is used for select/poll system call + * @filep: file pointer + * @wait: poll table to wait + */ +static unsigned int vpif_poll(struct file *filep, poll_table * wait) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *channel = fh->channel; + struct common_obj *common = &(channel->common[VPIF_VIDEO_INDEX]); + unsigned int res = 0; + + vpif_dbg(2, debug, "vpif_poll\n"); + + if (common->started) { + mutex_lock(&common->lock); + res = vb2_poll(&common->buffer_queue, filep, wait); + mutex_unlock(&common->lock); + } + return res; +} + +/** + * vpif_open : vpif open handler + * @filep: file ptr + * + * It creates object of file handle structure and stores it in private_data + * member of filepointer + */ +static int vpif_open(struct file *filep) +{ + struct video_device *vdev = video_devdata(filep); + struct common_obj *common; + struct video_obj *vid_ch; + struct channel_obj *ch; + struct vpif_fh *fh; + + vpif_dbg(2, debug, "vpif_open\n"); + + ch = video_get_drvdata(vdev); + + vid_ch = &ch->video; + common = &ch->common[VPIF_VIDEO_INDEX]; + + /* Allocate memory for the file handle object */ + fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL); + if (NULL == fh) { + vpif_err("unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + if (mutex_lock_interruptible(&common->lock)) { + kfree(fh); + return -ERESTARTSYS; + } + /* store pointer to fh in private_data member of filep */ + filep->private_data = fh; + fh->channel = ch; + fh->initialized = 0; + /* If decoder is not initialized. initialize it */ + if (!ch->initialized) { + fh->initialized = 1; + ch->initialized = 1; + memset(&(ch->vpifparams), 0, sizeof(struct vpif_params)); + } + /* Increment channel usrs counter */ + ch->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed[VPIF_VIDEO_INDEX] = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&ch->prio, &fh->prio); + mutex_unlock(&common->lock); + return 0; +} + +/** + * vpif_release : function to clean up file close + * @filep: file pointer + * + * This function deletes buffer queue, frees the buffers and the vpif file + * handle + */ +static int vpif_release(struct file *filep) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + vpif_dbg(2, debug, "vpif_release\n"); + + common = &ch->common[VPIF_VIDEO_INDEX]; + + mutex_lock(&common->lock); + /* if this instance is doing IO */ + if (fh->io_allowed[VPIF_VIDEO_INDEX]) { + /* Reset io_usrs member of channel object */ + common->io_usrs = 0; + /* Disable channel as per its device type and channel id */ + if (VPIF_CHANNEL0_VIDEO == ch->channel_id) { + enable_channel0(0); + channel0_intr_enable(0); + } + if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel1(0); + channel1_intr_enable(0); + } + common->started = 0; + /* Free buffers allocated */ + vb2_queue_release(&common->buffer_queue); + vb2_dma_contig_cleanup_ctx(common->alloc_ctx); + } + + /* Decrement channel usrs counter */ + ch->usrs--; + + /* Close the priority */ + v4l2_prio_close(&ch->prio, fh->prio); + + if (fh->initialized) + ch->initialized = 0; + + mutex_unlock(&common->lock); + filep->private_data = NULL; + kfree(fh); + return 0; +} + +/** + * vpif_reqbufs() - request buffer handler + * @file: file ptr + * @priv: file handle + * @reqbuf: request buffer structure ptr + */ +static int vpif_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + u8 index = 0; + struct vb2_queue *q; + int ret; + + vpif_dbg(2, debug, "vpif_reqbufs\n"); + + /** + * This file handle has not initialized the channel, + * It is not allowed to do settings + */ + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) + || (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != reqbuf->type || !vpif_dev) + return -EINVAL; + + index = VPIF_VIDEO_INDEX; + + common = &ch->common[index]; + + if (0 != common->io_usrs) + return -EBUSY; + + /* Initialize videobuf2 queue as per the buffer type */ + common->alloc_ctx = vb2_dma_contig_init_ctx(vpif_dev); + if (IS_ERR(common->alloc_ctx)) { + vpif_err("Failed to get the context\n"); + return PTR_ERR(common->alloc_ctx); + } + q = &common->buffer_queue; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = fh; + q->ops = &video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct vpif_cap_buffer); + q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + + ret = vb2_queue_init(q); + if (ret) { + vpif_err("vpif_capture: vb2_queue_init() failed\n"); + vb2_dma_contig_cleanup_ctx(common->alloc_ctx); + return ret; + } + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed[index] = 1; + /* Increment io usrs member of channel object to 1 */ + common->io_usrs = 1; + /* Store type of memory requested in channel object */ + common->memory = reqbuf->memory; + INIT_LIST_HEAD(&common->dma_queue); + + /* Allocate buffers */ + return vb2_reqbufs(&common->buffer_queue, reqbuf); +} + +/** + * vpif_querybuf() - query buffer handler + * @file: file ptr + * @priv: file handle + * @buf: v4l2 buffer structure ptr + */ +static int vpif_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_querybuf\n"); + + if (common->fmt.type != buf->type) + return -EINVAL; + + if (common->memory != V4L2_MEMORY_MMAP) { + vpif_dbg(1, debug, "Invalid memory\n"); + return -EINVAL; + } + + return vb2_querybuf(&common->buffer_queue, buf); +} + +/** + * vpif_qbuf() - query buffer handler + * @file: file ptr + * @priv: file handle + * @buf: v4l2 buffer structure ptr + */ +static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_buffer tbuf = *buf; + + vpif_dbg(2, debug, "vpif_qbuf\n"); + + if (common->fmt.type != tbuf.type) { + vpif_err("invalid buffer type\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh io not allowed\n"); + return -EACCES; + } + + return vb2_qbuf(&common->buffer_queue, buf); +} + +/** + * vpif_dqbuf() - query buffer handler + * @file: file ptr + * @priv: file handle + * @buf: v4l2 buffer structure ptr + */ +static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_dqbuf\n"); + + return vb2_dqbuf(&common->buffer_queue, buf, + (file->f_flags & O_NONBLOCK)); +} + +/** + * vpif_streamon() - streamon handler + * @file: file ptr + * @priv: file handle + * @buftype: v4l2 buffer type + */ +static int vpif_streamon(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id]; + struct vpif_params *vpif; + int ret = 0; + + vpif_dbg(2, debug, "vpif_streamon\n"); + + vpif = &ch->vpifparams; + + if (buftype != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + vpif_dbg(1, debug, "buffer type not supported\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_dbg(1, debug, "io not allowed\n"); + return -EACCES; + } + + /* If Streaming is already started, return error */ + if (common->started) { + vpif_dbg(1, debug, "channel->started\n"); + return -EBUSY; + } + + if ((ch->channel_id == VPIF_CHANNEL0_VIDEO && + oth_ch->common[VPIF_VIDEO_INDEX].started && + vpif->std_info.ycmux_mode == 0) || + ((ch->channel_id == VPIF_CHANNEL1_VIDEO) && + (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) { + vpif_dbg(1, debug, "other channel is being used\n"); + return -EBUSY; + } + + ret = vpif_check_format(ch, &common->fmt.fmt.pix, 0); + if (ret) + return ret; + + /* Enable streamon on the sub device */ + ret = v4l2_subdev_call(ch->sd, video, s_stream, 1); + + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) { + vpif_dbg(1, debug, "stream on failed in subdev\n"); + return ret; + } + + /* Call vb2_streamon to start streaming in videobuf2 */ + ret = vb2_streamon(&common->buffer_queue, buftype); + if (ret) { + vpif_dbg(1, debug, "vb2_streamon\n"); + return ret; + } + + return ret; +} + +/** + * vpif_streamoff() - streamoff handler + * @file: file ptr + * @priv: file handle + * @buftype: v4l2 buffer type + */ +static int vpif_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret; + + vpif_dbg(2, debug, "vpif_streamoff\n"); + + if (buftype != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + vpif_dbg(1, debug, "buffer type not supported\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_dbg(1, debug, "io not allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!common->started) { + vpif_dbg(1, debug, "channel->started\n"); + return -EINVAL; + } + + /* disable channel */ + if (VPIF_CHANNEL0_VIDEO == ch->channel_id) { + enable_channel0(0); + channel0_intr_enable(0); + } else { + enable_channel1(0); + channel1_intr_enable(0); + } + + common->started = 0; + + ret = v4l2_subdev_call(ch->sd, video, s_stream, 0); + + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) + vpif_dbg(1, debug, "stream off failed in subdev\n"); + + return vb2_streamoff(&common->buffer_queue, buftype); +} + +/** + * vpif_input_to_subdev() - Maps input to sub device + * @vpif_cfg - global config ptr + * @chan_cfg - channel config ptr + * @input_index - Given input index from application + * + * lookup the sub device information for a given input index. + * we report all the inputs to application. inputs table also + * has sub device name for the each input + */ +static int vpif_input_to_subdev( + struct vpif_capture_config *vpif_cfg, + struct vpif_capture_chan_config *chan_cfg, + int input_index) +{ + struct vpif_subdev_info *subdev_info; + const char *subdev_name; + int i; + + vpif_dbg(2, debug, "vpif_input_to_subdev\n"); + + subdev_name = chan_cfg->inputs[input_index].subdev_name; + if (subdev_name == NULL) + return -1; + + /* loop through the sub device list to get the sub device info */ + for (i = 0; i < vpif_cfg->subdev_count; i++) { + subdev_info = &vpif_cfg->subdev_info[i]; + if (!strcmp(subdev_info->name, subdev_name)) + return i; + } + return -1; +} + +/** + * vpif_set_input() - Select an input + * @vpif_cfg - global config ptr + * @ch - channel + * @_index - Given input index from application + * + * Select the given input. + */ +static int vpif_set_input( + struct vpif_capture_config *vpif_cfg, + struct channel_obj *ch, + int index) +{ + struct vpif_capture_chan_config *chan_cfg = + &vpif_cfg->chan_config[ch->channel_id]; + struct vpif_subdev_info *subdev_info = NULL; + struct v4l2_subdev *sd = NULL; + u32 input = 0, output = 0; + int sd_index; + int ret; + + sd_index = vpif_input_to_subdev(vpif_cfg, chan_cfg, index); + if (sd_index >= 0) { + sd = vpif_obj.sd[sd_index]; + subdev_info = &vpif_cfg->subdev_info[sd_index]; + } + + /* first setup input path from sub device to vpif */ + if (sd && vpif_cfg->setup_input_path) { + ret = vpif_cfg->setup_input_path(ch->channel_id, + subdev_info->name); + if (ret < 0) { + vpif_dbg(1, debug, "couldn't setup input path for the" \ + " sub device %s, for input index %d\n", + subdev_info->name, index); + return ret; + } + } + + if (sd) { + input = chan_cfg->inputs[index].input_route; + output = chan_cfg->inputs[index].output_route; + ret = v4l2_subdev_call(sd, video, s_routing, + input, output, 0); + if (ret < 0 && ret != -ENOIOCTLCMD) { + vpif_dbg(1, debug, "Failed to set input\n"); + return ret; + } + } + ch->input_idx = index; + ch->sd = sd; + /* copy interface parameters to vpif */ + ch->vpifparams.iface = chan_cfg->vpif_if; + + /* update tvnorms from the sub device input info */ + ch->video_dev->tvnorms = chan_cfg->inputs[index].input.std; + return 0; +} + +/** + * vpif_querystd() - querystd handler + * @file: file ptr + * @priv: file handle + * @std_id: ptr to std id + * + * This function is called to detect standard at the selected input + */ +static int vpif_querystd(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + int ret = 0; + + vpif_dbg(2, debug, "vpif_querystd\n"); + + /* Call querystd function of decoder device */ + ret = v4l2_subdev_call(ch->sd, video, querystd, std_id); + + if (ret == -ENOIOCTLCMD || ret == -ENODEV) + return -ENODATA; + if (ret) { + vpif_dbg(1, debug, "Failed to query standard for sub devices\n"); + return ret; + } + + return 0; +} + +/** + * vpif_g_std() - get STD handler + * @file: file ptr + * @priv: file handle + * @std_id: ptr to std id + */ +static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + vpif_dbg(2, debug, "vpif_g_std\n"); + + *std = ch->video.stdid; + return 0; +} + +/** + * vpif_s_std() - set STD handler + * @file: file ptr + * @priv: file handle + * @std_id: ptr to std id + */ +static int vpif_s_std(struct file *file, void *priv, v4l2_std_id std_id) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + vpif_dbg(2, debug, "vpif_s_std\n"); + + if (common->started) { + vpif_err("streaming in progress\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (0 != ret) + return ret; + + fh->initialized = 1; + + /* Call encoder subdevice function to set the standard */ + ch->video.stdid = std_id; + memset(&ch->video.dv_timings, 0, sizeof(ch->video.dv_timings)); + + /* Get the information about the standard */ + if (vpif_update_std_info(ch)) { + vpif_err("Error getting the standard info\n"); + return -EINVAL; + } + + /* Configure the default format information */ + vpif_config_format(ch); + + /* set standard in the sub device */ + ret = v4l2_subdev_call(ch->sd, core, s_std, std_id); + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) { + vpif_dbg(1, debug, "Failed to set standard for sub devices\n"); + return ret; + } + return 0; +} + +/** + * vpif_enum_input() - ENUMINPUT handler + * @file: file ptr + * @priv: file handle + * @input: ptr to input structure + */ +static int vpif_enum_input(struct file *file, void *priv, + struct v4l2_input *input) +{ + + struct vpif_capture_config *config = vpif_dev->platform_data; + struct vpif_capture_chan_config *chan_cfg; + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + chan_cfg = &config->chan_config[ch->channel_id]; + + if (input->index >= chan_cfg->input_count) { + vpif_dbg(1, debug, "Invalid input index\n"); + return -EINVAL; + } + + memcpy(input, &chan_cfg->inputs[input->index].input, + sizeof(*input)); + return 0; +} + +/** + * vpif_g_input() - Get INPUT handler + * @file: file ptr + * @priv: file handle + * @index: ptr to input index + */ +static int vpif_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *index = ch->input_idx; + return 0; +} + +/** + * vpif_s_input() - Set INPUT handler + * @file: file ptr + * @priv: file handle + * @index: input index + */ +static int vpif_s_input(struct file *file, void *priv, unsigned int index) +{ + struct vpif_capture_config *config = vpif_dev->platform_data; + struct vpif_capture_chan_config *chan_cfg; + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret; + + chan_cfg = &config->chan_config[ch->channel_id]; + + if (index >= chan_cfg->input_count) + return -EINVAL; + + if (common->started) { + vpif_err("Streaming in progress\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (0 != ret) + return ret; + + fh->initialized = 1; + return vpif_set_input(config, ch, index); +} + +/** + * vpif_enum_fmt_vid_cap() - ENUM_FMT handler + * @file: file ptr + * @priv: file handle + * @index: input index + */ +static int vpif_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + if (fmt->index != 0) { + vpif_dbg(1, debug, "Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER) { + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strcpy(fmt->description, "Raw Mode -Bayer Pattern GrRBGb"); + fmt->pixelformat = V4L2_PIX_FMT_SBGGR8; + } else { + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strcpy(fmt->description, "YCbCr4:2:2 YC Planar"); + fmt->pixelformat = V4L2_PIX_FMT_YUV422P; + } + return 0; +} + +/** + * vpif_try_fmt_vid_cap() - TRY_FMT handler + * @file: file ptr + * @priv: file handle + * @fmt: ptr to v4l2 format structure + */ +static int vpif_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + return vpif_check_format(ch, pixfmt, 1); +} + + +/** + * vpif_g_fmt_vid_cap() - Set INPUT handler + * @file: file ptr + * @priv: file handle + * @fmt: ptr to v4l2 format structure + */ +static int vpif_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + /* Check the validity of the buffer type */ + if (common->fmt.type != fmt->type) + return -EINVAL; + + /* Fill in the information about format */ + *fmt = common->fmt; + return 0; +} + +/** + * vpif_s_fmt_vid_cap() - Set FMT handler + * @file: file ptr + * @priv: file handle + * @fmt: ptr to v4l2 format structure + */ +static int vpif_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_pix_format *pixfmt; + int ret = 0; + + vpif_dbg(2, debug, "%s\n", __func__); + + /* If streaming is started, return error */ + if (common->started) { + vpif_dbg(1, debug, "Streaming is started\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (0 != ret) + return ret; + + fh->initialized = 1; + + pixfmt = &fmt->fmt.pix; + /* Check for valid field format */ + ret = vpif_check_format(ch, pixfmt, 0); + + if (ret) + return ret; + /* store the format in the channel object */ + common->fmt = *fmt; + return 0; +} + +/** + * vpif_querycap() - QUERYCAP handler + * @file: file ptr + * @priv: file handle + * @cap: ptr to v4l2_capability structure + */ +static int vpif_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpif_capture_config *config = vpif_dev->platform_data; + + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + snprintf(cap->driver, sizeof(cap->driver), "%s", dev_name(vpif_dev)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + dev_name(vpif_dev)); + strlcpy(cap->card, config->card_name, sizeof(cap->card)); + + return 0; +} + +/** + * vpif_g_priority() - get priority handler + * @file: file ptr + * @priv: file handle + * @prio: ptr to v4l2_priority structure + */ +static int vpif_g_priority(struct file *file, void *priv, + enum v4l2_priority *prio) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *prio = v4l2_prio_max(&ch->prio); + + return 0; +} + +/** + * vpif_s_priority() - set priority handler + * @file: file ptr + * @priv: file handle + * @prio: ptr to v4l2_priority structure + */ +static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_prio_change(&ch->prio, &fh->prio, p); +} + +/** + * vpif_cropcap() - cropcap handler + * @file: file ptr + * @priv: file handle + * @crop: ptr to v4l2_cropcap structure + */ +static int vpif_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != crop->type) + return -EINVAL; + + crop->bounds.left = 0; + crop->bounds.top = 0; + crop->bounds.height = common->height; + crop->bounds.width = common->width; + crop->defrect = crop->bounds; + return 0; +} + +/** + * vpif_enum_dv_timings() - ENUM_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: input timings + */ +static int +vpif_enum_dv_timings(struct file *file, void *priv, + struct v4l2_enum_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + int ret; + + ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings); + if (ret == -ENOIOCTLCMD || ret == -ENODEV) + return -EINVAL; + return ret; +} + +/** + * vpif_query_dv_timings() - QUERY_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: input timings + */ +static int +vpif_query_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + int ret; + + ret = v4l2_subdev_call(ch->sd, video, query_dv_timings, timings); + if (ret == -ENOIOCTLCMD || ret == -ENODEV) + return -ENODATA; + return ret; +} + +/** + * vpif_s_dv_timings() - S_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->dv_timings.bt; + int ret; + + if (timings->type != V4L2_DV_BT_656_1120) { + vpif_dbg(2, debug, "Timing type not defined\n"); + return -EINVAL; + } + + /* Configure subdevice timings, if any */ + ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD || ret == -ENODEV) + ret = 0; + if (ret < 0) { + vpif_dbg(2, debug, "Error setting custom DV timings\n"); + return ret; + } + + if (!(timings->bt.width && timings->bt.height && + (timings->bt.hbackporch || + timings->bt.hfrontporch || + timings->bt.hsync) && + timings->bt.vfrontporch && + (timings->bt.vbackporch || + timings->bt.vsync))) { + vpif_dbg(2, debug, "Timings for width, height, " + "horizontal back porch, horizontal sync, " + "horizontal front porch, vertical back porch, " + "vertical sync and vertical back porch " + "must be defined\n"); + return -EINVAL; + } + + vid_ch->dv_timings = *timings; + + /* Configure video port timings */ + + std_info->eav2sav = bt->hbackporch + bt->hfrontporch + + bt->hsync - 8; + std_info->sav2eav = bt->width; + + std_info->l1 = 1; + std_info->l3 = bt->vsync + bt->vbackporch + 1; + + if (bt->interlaced) { + if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) { + std_info->vsize = bt->height * 2 + + bt->vfrontporch + bt->vsync + bt->vbackporch + + bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + std_info->l5 = std_info->vsize/2 - + (bt->vfrontporch - 1); + std_info->l7 = std_info->vsize/2 + 1; + std_info->l9 = std_info->l7 + bt->il_vsync + + bt->il_vbackporch + 1; + std_info->l11 = std_info->vsize - + (bt->il_vfrontporch - 1); + } else { + vpif_dbg(2, debug, "Required timing values for " + "interlaced BT format missing\n"); + return -EINVAL; + } + } else { + std_info->vsize = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + std_info->l5 = std_info->vsize - (bt->vfrontporch - 1); + } + strncpy(std_info->name, "Custom timings BT656/1120", VPIF_MAX_NAME); + std_info->width = bt->width; + std_info->height = bt->height; + std_info->frm_fmt = bt->interlaced ? 0 : 1; + std_info->ycmux_mode = 0; + std_info->capture_format = 0; + std_info->vbi_supported = 0; + std_info->hd_sd = 1; + std_info->stdid = 0; + + vid_ch->stdid = 0; + return 0; +} + +/** + * vpif_g_dv_timings() - G_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + *timings = vid_ch->dv_timings; + + return 0; +} + +/* + * vpif_g_chip_ident() - Identify the chip + * @file: file ptr + * @priv: file handle + * @chip: chip identity + * + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) { + vpif_dbg(2, debug, "match_type is invalid.\n"); + return -EINVAL; + } + + return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * vpif_dbg_g_register() - Read register + * @file: file ptr + * @priv: file handle + * @reg: register to be read + * + * Debugging only + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(ch->sd, core, g_register, reg); +} + +/* + * vpif_dbg_s_register() - Write to register + * @file: file ptr + * @priv: file handle + * @reg: register to be modified + * + * Debugging only + * Returns zero or -EINVAL if write operations fails. + */ +static int vpif_dbg_s_register(struct file *file, void *priv, + const struct v4l2_dbg_register *reg) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(ch->sd, core, s_register, reg); +} +#endif + +/* + * vpif_log_status() - Status information + * @file: file ptr + * @priv: file handle + * + * Returns zero. + */ +static int vpif_log_status(struct file *filep, void *priv) +{ + /* status for sub devices */ + v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status); + + return 0; +} + +/* vpif capture ioctl operations */ +static const struct v4l2_ioctl_ops vpif_ioctl_ops = { + .vidioc_querycap = vpif_querycap, + .vidioc_g_priority = vpif_g_priority, + .vidioc_s_priority = vpif_s_priority, + .vidioc_enum_fmt_vid_cap = vpif_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vpif_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vpif_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vpif_try_fmt_vid_cap, + .vidioc_enum_input = vpif_enum_input, + .vidioc_s_input = vpif_s_input, + .vidioc_g_input = vpif_g_input, + .vidioc_reqbufs = vpif_reqbufs, + .vidioc_querybuf = vpif_querybuf, + .vidioc_querystd = vpif_querystd, + .vidioc_s_std = vpif_s_std, + .vidioc_g_std = vpif_g_std, + .vidioc_qbuf = vpif_qbuf, + .vidioc_dqbuf = vpif_dqbuf, + .vidioc_streamon = vpif_streamon, + .vidioc_streamoff = vpif_streamoff, + .vidioc_cropcap = vpif_cropcap, + .vidioc_enum_dv_timings = vpif_enum_dv_timings, + .vidioc_query_dv_timings = vpif_query_dv_timings, + .vidioc_s_dv_timings = vpif_s_dv_timings, + .vidioc_g_dv_timings = vpif_g_dv_timings, + .vidioc_g_chip_ident = vpif_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpif_dbg_g_register, + .vidioc_s_register = vpif_dbg_s_register, +#endif + .vidioc_log_status = vpif_log_status, +}; + +/* vpif file operations */ +static struct v4l2_file_operations vpif_fops = { + .owner = THIS_MODULE, + .open = vpif_open, + .release = vpif_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpif_mmap, + .poll = vpif_poll +}; + +/* vpif video template */ +static struct video_device vpif_video_template = { + .name = "vpif", + .fops = &vpif_fops, + .minor = -1, + .ioctl_ops = &vpif_ioctl_ops, +}; + +/** + * initialize_vpif() - Initialize vpif data structures + * + * Allocate memory for data structures and initialize them + */ +static int initialize_vpif(void) +{ + int err = 0, i, j; + int free_channel_objects_index; + + /* Default number of buffers should be 3 */ + if ((ch0_numbuffers > 0) && + (ch0_numbuffers < config_params.min_numbuffers)) + ch0_numbuffers = config_params.min_numbuffers; + if ((ch1_numbuffers > 0) && + (ch1_numbuffers < config_params.min_numbuffers)) + ch1_numbuffers = config_params.min_numbuffers; + + /* Set buffer size to min buffers size if it is invalid */ + if (ch0_bufsize < config_params.min_bufsize[VPIF_CHANNEL0_VIDEO]) + ch0_bufsize = + config_params.min_bufsize[VPIF_CHANNEL0_VIDEO]; + if (ch1_bufsize < config_params.min_bufsize[VPIF_CHANNEL1_VIDEO]) + ch1_bufsize = + config_params.min_bufsize[VPIF_CHANNEL1_VIDEO]; + + config_params.numbuffers[VPIF_CHANNEL0_VIDEO] = ch0_numbuffers; + config_params.numbuffers[VPIF_CHANNEL1_VIDEO] = ch1_numbuffers; + if (ch0_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL0_VIDEO] + = ch0_bufsize; + } + if (ch1_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL1_VIDEO] + = ch1_bufsize; + } + + /* Allocate memory for six channel objects */ + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + vpif_obj.dev[i] = + kzalloc(sizeof(*vpif_obj.dev[i]), GFP_KERNEL); + /* If memory allocation fails, return error */ + if (!vpif_obj.dev[i]) { + free_channel_objects_index = i; + err = -ENOMEM; + goto vpif_init_free_channel_objects; + } + } + return 0; + +vpif_init_free_channel_objects: + for (j = 0; j < free_channel_objects_index; j++) + kfree(vpif_obj.dev[j]); + return err; +} + +/** + * vpif_probe : This function probes the vpif capture driver + * @pdev: platform device pointer + * + * This creates device entries by register itself to the V4L2 driver and + * initializes fields of each channel objects + */ +static __init int vpif_probe(struct platform_device *pdev) +{ + struct vpif_subdev_info *subdevdata; + struct vpif_capture_config *config; + int i, j, k, err; + int res_idx = 0; + struct i2c_adapter *i2c_adap; + struct channel_obj *ch; + struct common_obj *common; + struct video_device *vfd; + struct resource *res; + int subdev_count; + size_t size; + + vpif_dev = &pdev->dev; + + err = initialize_vpif(); + if (err) { + v4l2_err(vpif_dev->driver, "Error initializing vpif\n"); + return err; + } + + err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev); + if (err) { + v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n"); + return err; + } + + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, res_idx))) { + for (i = res->start; i <= res->end; i++) { + if (request_irq(i, vpif_channel_isr, IRQF_SHARED, + "VPIF_Capture", (void *) + (&vpif_obj.dev[res_idx]->channel_id))) { + err = -EBUSY; + for (j = 0; j < i; j++) + free_irq(j, (void *) + (&vpif_obj.dev[res_idx]->channel_id)); + goto vpif_int_err; + } + } + res_idx++; + } + + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (NULL == vfd) { + for (j = 0; j < i; j++) { + ch = vpif_obj.dev[j]; + video_device_release(ch->video_dev); + } + err = -ENOMEM; + goto vpif_int_err; + } + + /* Initialize field of video device */ + *vfd = vpif_video_template; + vfd->v4l2_dev = &vpif_obj.v4l2_dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), + "VPIF_Capture_DRIVER_V%s", + VPIF_CAPTURE_VERSION); + /* Set video_dev to the video device */ + ch->video_dev = vfd; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) { + size = resource_size(res); + /* The resources are divided into two equal memory and when we + * have HD output we can add them together + */ + for (j = 0; j < VPIF_CAPTURE_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + ch->channel_id = j; + /* only enabled if second resource exists */ + config_params.video_limit[ch->channel_id] = 0; + if (size) + config_params.video_limit[ch->channel_id] = + size/2; + } + } + + i2c_adap = i2c_get_adapter(1); + config = pdev->dev.platform_data; + + subdev_count = config->subdev_count; + vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count, + GFP_KERNEL); + if (vpif_obj.sd == NULL) { + vpif_err("unable to allocate memory for subdevice pointers\n"); + err = -ENOMEM; + goto vpif_sd_error; + } + + for (i = 0; i < subdev_count; i++) { + subdevdata = &config->subdev_info[i]; + vpif_obj.sd[i] = + v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, + i2c_adap, + &subdevdata->board_info, + NULL); + + if (!vpif_obj.sd[i]) { + vpif_err("Error registering v4l2 subdevice\n"); + goto probe_subdev_out; + } + v4l2_info(&vpif_obj.v4l2_dev, "registered sub device %s\n", + subdevdata->name); + } + + for (j = 0; j < VPIF_CAPTURE_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + ch->channel_id = j; + common = &(ch->common[VPIF_VIDEO_INDEX]); + spin_lock_init(&common->irqlock); + mutex_init(&common->lock); + ch->video_dev->lock = &common->lock; + /* Initialize prio member of channel object */ + v4l2_prio_init(&ch->prio); + video_set_drvdata(ch->video_dev, ch); + + /* select input 0 */ + err = vpif_set_input(config, ch, 0); + if (err) + goto probe_out; + + err = video_register_device(ch->video_dev, + VFL_TYPE_GRABBER, (j ? 1 : 0)); + if (err) + goto probe_out; + } + v4l2_info(&vpif_obj.v4l2_dev, "VPIF capture driver initialized\n"); + return 0; + +probe_out: + for (k = 0; k < j; k++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[k]; + /* Unregister video device */ + video_unregister_device(ch->video_dev); + } +probe_subdev_out: + /* free sub devices memory */ + kfree(vpif_obj.sd); + +vpif_sd_error: + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + ch = vpif_obj.dev[i]; + /* Note: does nothing if ch->video_dev == NULL */ + video_device_release(ch->video_dev); + } +vpif_int_err: + v4l2_device_unregister(&vpif_obj.v4l2_dev); + for (i = 0; i < res_idx; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + for (j = res->start; j <= res->end; j++) + free_irq(j, (void *)(&vpif_obj.dev[i]->channel_id)); + } + return err; +} + +/** + * vpif_remove() - driver remove handler + * @device: ptr to platform device structure + * + * The vidoe device is unregistered + */ +static int vpif_remove(struct platform_device *device) +{ + int i; + struct channel_obj *ch; + + v4l2_device_unregister(&vpif_obj.v4l2_dev); + + /* un-register device */ + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + /* Unregister video device */ + video_unregister_device(ch->video_dev); + } + return 0; +} + +#ifdef CONFIG_PM +/** + * vpif_suspend: vpif device suspend + */ +static int vpif_suspend(struct device *dev) +{ + + struct common_obj *common; + struct channel_obj *ch; + int i; + + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); + if (ch->usrs && common->io_usrs) { + /* Disable channel */ + if (ch->channel_id == VPIF_CHANNEL0_VIDEO) { + enable_channel0(0); + channel0_intr_enable(0); + } + if (ch->channel_id == VPIF_CHANNEL1_VIDEO || + common->started == 2) { + enable_channel1(0); + channel1_intr_enable(0); + } + } + mutex_unlock(&common->lock); + } + + return 0; +} + +/* + * vpif_resume: vpif device suspend + */ +static int vpif_resume(struct device *dev) +{ + struct common_obj *common; + struct channel_obj *ch; + int i; + + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); + if (ch->usrs && common->io_usrs) { + /* Disable channel */ + if (ch->channel_id == VPIF_CHANNEL0_VIDEO) { + enable_channel0(1); + channel0_intr_enable(1); + } + if (ch->channel_id == VPIF_CHANNEL1_VIDEO || + common->started == 2) { + enable_channel1(1); + channel1_intr_enable(1); + } + } + mutex_unlock(&common->lock); + } + + return 0; +} + +static const struct dev_pm_ops vpif_dev_pm_ops = { + .suspend = vpif_suspend, + .resume = vpif_resume, +}; + +#define vpif_pm_ops (&vpif_dev_pm_ops) +#else +#define vpif_pm_ops NULL +#endif + +static __refdata struct platform_driver vpif_driver = { + .driver = { + .name = "vpif_capture", + .owner = THIS_MODULE, + .pm = vpif_pm_ops, + }, + .probe = vpif_probe, + .remove = vpif_remove, +}; + +/** + * vpif_init: initialize the vpif driver + * + * This function registers device and driver to the kernel, requests irq + * handler and allocates memory + * for channel objects + */ +static __init int vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} + +/** + * vpif_cleanup : This function clean up the vpif capture resources + * + * This will un-registers device and driver to the kernel, frees + * requested irq handler and de-allocates memory allocated for channel + * objects. + */ +static void vpif_cleanup(void) +{ + struct platform_device *pdev; + struct resource *res; + int irq_num; + int i = 0; + + pdev = container_of(vpif_dev, struct platform_device, dev); + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, + (void *)(&vpif_obj.dev[i]->channel_id)); + i++; + } + + platform_driver_unregister(&vpif_driver); + + kfree(vpif_obj.sd); + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) + kfree(vpif_obj.dev[i]); +} + +/* Function for module initialization and cleanup */ +module_init(vpif_init); +module_exit(vpif_cleanup); diff --git a/drivers/media/platform/davinci/vpif_capture.h b/drivers/media/platform/davinci/vpif_capture.h new file mode 100644 index 00000000..3d3c1e5c --- /dev/null +++ b/drivers/media/platform/davinci/vpif_capture.h @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef VPIF_CAPTURE_H +#define VPIF_CAPTURE_H + +#ifdef __KERNEL__ + +/* Header files */ +#include +#include +#include +#include +#include + +#include "vpif.h" + +/* Macros */ +#define VPIF_CAPTURE_VERSION "0.0.2" + +#define VPIF_VALID_FIELD(field) (((V4L2_FIELD_ANY == field) || \ + (V4L2_FIELD_NONE == field)) || \ + (((V4L2_FIELD_INTERLACED == field) || \ + (V4L2_FIELD_SEQ_TB == field)) || \ + (V4L2_FIELD_SEQ_BT == field))) + +#define VPIF_CAPTURE_MAX_DEVICES 2 +#define VPIF_VIDEO_INDEX 0 +#define VPIF_NUMBER_OF_OBJECTS 1 + +/* Enumerated data type to give id to each device per channel */ +enum vpif_channel_id { + VPIF_CHANNEL0_VIDEO = 0, + VPIF_CHANNEL1_VIDEO, +}; + +struct video_obj { + enum v4l2_field buf_field; + /* Currently selected or default standard */ + v4l2_std_id stdid; + struct v4l2_dv_timings dv_timings; +}; + +struct vpif_cap_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +struct common_obj { + /* Pointer pointing to current v4l2_buffer */ + struct vpif_cap_buffer *cur_frm; + /* Pointer pointing to current v4l2_buffer */ + struct vpif_cap_buffer *next_frm; + /* + * This field keeps track of type of buffer exchange mechanism + * user has selected + */ + enum v4l2_memory memory; + /* Used to store pixel format */ + struct v4l2_format fmt; + /* Buffer queue used in video-buf */ + struct vb2_queue buffer_queue; + /* allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + /* Queue of filled frames */ + struct list_head dma_queue; + /* Used in video-buf */ + spinlock_t irqlock; + /* lock used to access this structure */ + struct mutex lock; + /* number of users performing IO */ + u32 io_usrs; + /* Indicates whether streaming started */ + u8 started; + /* Function pointer to set the addresses */ + void (*set_addr) (unsigned long, unsigned long, unsigned long, + unsigned long); + /* offset where Y top starts from the starting of the buffer */ + u32 ytop_off; + /* offset where Y bottom starts from the starting of the buffer */ + u32 ybtm_off; + /* offset where C top starts from the starting of the buffer */ + u32 ctop_off; + /* offset where C bottom starts from the starting of the buffer */ + u32 cbtm_off; + /* Indicates width of the image data */ + u32 width; + /* Indicates height of the image data */ + u32 height; +}; + +struct channel_obj { + /* Identifies video device for this channel */ + struct video_device *video_dev; + /* Used to keep track of state of the priority */ + struct v4l2_prio_state prio; + /* number of open instances of the channel */ + int usrs; + /* Indicates id of the field which is being displayed */ + u32 field_id; + /* flag to indicate whether decoder is initialized */ + u8 initialized; + /* Identifies channel */ + enum vpif_channel_id channel_id; + /* Current input */ + u32 input_idx; + /* subdev corresponding to the current input, may be NULL */ + struct v4l2_subdev *sd; + /* vpif configuration params */ + struct vpif_params vpifparams; + /* common object array */ + struct common_obj common[VPIF_NUMBER_OF_OBJECTS]; + /* video object */ + struct video_obj video; +}; + +/* File handle structure */ +struct vpif_fh { + /* pointer to channel object for opened device */ + struct channel_obj *channel; + /* Indicates whether this file handle is doing IO */ + u8 io_allowed[VPIF_NUMBER_OF_OBJECTS]; + /* Used to keep track priority of this instance */ + enum v4l2_priority prio; + /* Used to indicate channel is initialize or not */ + u8 initialized; +}; + +struct vpif_device { + struct v4l2_device v4l2_dev; + struct channel_obj *dev[VPIF_CAPTURE_NUM_CHANNELS]; + struct v4l2_subdev **sd; +}; + +struct vpif_config_params { + u8 min_numbuffers; + u8 numbuffers[VPIF_CAPTURE_NUM_CHANNELS]; + s8 device_type; + u32 min_bufsize[VPIF_CAPTURE_NUM_CHANNELS]; + u32 channel_bufsize[VPIF_CAPTURE_NUM_CHANNELS]; + u8 default_device[VPIF_CAPTURE_NUM_CHANNELS]; + u32 video_limit[VPIF_CAPTURE_NUM_CHANNELS]; + u8 max_device_type; +}; + +#endif /* End of __KERNEL__ */ +#endif /* VPIF_CAPTURE_H */ diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c new file mode 100644 index 00000000..1b3fb5ca --- /dev/null +++ b/drivers/media/platform/davinci/vpif_display.c @@ -0,0 +1,2044 @@ +/* + * vpif-display - VPIF display driver + * Display driver for TI DaVinci VPIF + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include "vpif_display.h" +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci VPIF Display driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VPIF_DISPLAY_VERSION); + +#define VPIF_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50) + +#define vpif_err(fmt, arg...) v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg) +#define vpif_dbg(level, debug, fmt, arg...) \ + v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg) + +static int debug = 1; +static u32 ch2_numbuffers = 3; +static u32 ch3_numbuffers = 3; +static u32 ch2_bufsize = 1920 * 1080 * 2; +static u32 ch3_bufsize = 720 * 576 * 2; + +module_param(debug, int, 0644); +module_param(ch2_numbuffers, uint, S_IRUGO); +module_param(ch3_numbuffers, uint, S_IRUGO); +module_param(ch2_bufsize, uint, S_IRUGO); +module_param(ch3_bufsize, uint, S_IRUGO); + +MODULE_PARM_DESC(debug, "Debug level 0-1"); +MODULE_PARM_DESC(ch2_numbuffers, "Channel2 buffer count (default:3)"); +MODULE_PARM_DESC(ch3_numbuffers, "Channel3 buffer count (default:3)"); +MODULE_PARM_DESC(ch2_bufsize, "Channel2 buffer size (default:1920 x 1080 x 2)"); +MODULE_PARM_DESC(ch3_bufsize, "Channel3 buffer size (default:720 x 576 x 2)"); + +static struct vpif_config_params config_params = { + .min_numbuffers = 3, + .numbuffers[0] = 3, + .numbuffers[1] = 3, + .min_bufsize[0] = 720 * 480 * 2, + .min_bufsize[1] = 720 * 480 * 2, + .channel_bufsize[0] = 1920 * 1080 * 2, + .channel_bufsize[1] = 720 * 576 * 2, +}; + +static struct vpif_device vpif_obj = { {NULL} }; +static struct device *vpif_dev; +static void vpif_calculate_offsets(struct channel_obj *ch); +static void vpif_config_addr(struct channel_obj *ch, int muxmode); + +/* + * buffer_prepare: This is the callback function called from vb2_qbuf() + * function the buffer is prepared and user space virtual address is converted + * into physical address + */ +static int vpif_buffer_prepare(struct vb2_buffer *vb) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_queue *q = vb->vb2_queue; + struct common_obj *common; + unsigned long addr; + + common = &fh->channel->common[VPIF_VIDEO_INDEX]; + if (vb->state != VB2_BUF_STATE_ACTIVE && + vb->state != VB2_BUF_STATE_PREPARED) { + vb2_set_plane_payload(vb, 0, common->fmt.fmt.pix.sizeimage); + if (vb2_plane_vaddr(vb, 0) && + vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) + goto buf_align_exit; + + addr = vb2_dma_contig_plane_dma_addr(vb, 0); + if (q->streaming && + (V4L2_BUF_TYPE_SLICED_VBI_OUTPUT != q->type)) { + if (!ISALIGNED(addr + common->ytop_off) || + !ISALIGNED(addr + common->ybtm_off) || + !ISALIGNED(addr + common->ctop_off) || + !ISALIGNED(addr + common->cbtm_off)) + goto buf_align_exit; + } + } + return 0; + +buf_align_exit: + vpif_err("buffer offset not aligned to 8 bytes\n"); + return -EINVAL; +} + +/* + * vpif_buffer_queue_setup: This function allocates memory for the buffers + */ +static int vpif_buffer_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + unsigned long size; + + if (V4L2_MEMORY_MMAP == common->memory) { + size = config_params.channel_bufsize[ch->channel_id]; + /* + * Checking if the buffer size exceeds the available buffer + * ycmux_mode = 0 means 1 channel mode HD and + * ycmux_mode = 1 means 2 channels mode SD + */ + if (ch->vpifparams.std_info.ycmux_mode == 0) { + if (config_params.video_limit[ch->channel_id]) + while (size * *nbuffers > + (config_params.video_limit[0] + + config_params.video_limit[1])) + (*nbuffers)--; + } else { + if (config_params.video_limit[ch->channel_id]) + while (size * *nbuffers > + config_params.video_limit[ch->channel_id]) + (*nbuffers)--; + } + } else { + size = common->fmt.fmt.pix.sizeimage; + } + + if (*nbuffers < config_params.min_numbuffers) + *nbuffers = config_params.min_numbuffers; + + *nplanes = 1; + sizes[0] = size; + alloc_ctxs[0] = common->alloc_ctx; + return 0; +} + +/* + * vpif_buffer_queue: This function adds the buffer to DMA queue + */ +static void vpif_buffer_queue(struct vb2_buffer *vb) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vpif_disp_buffer *buf = container_of(vb, + struct vpif_disp_buffer, vb); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long flags; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&common->irqlock, flags); + list_add_tail(&buf->list, &common->dma_queue); + spin_unlock_irqrestore(&common->irqlock, flags); +} + +/* + * vpif_buf_cleanup: This function is called from the videobuf2 layer to + * free memory allocated to the buffers + */ +static void vpif_buf_cleanup(struct vb2_buffer *vb) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vpif_disp_buffer *buf = container_of(vb, + struct vpif_disp_buffer, vb); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long flags; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + spin_lock_irqsave(&common->irqlock, flags); + if (vb->state == VB2_BUF_STATE_ACTIVE) + list_del_init(&buf->list); + spin_unlock_irqrestore(&common->irqlock, flags); +} + +static void vpif_wait_prepare(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_unlock(&common->lock); +} + +static void vpif_wait_finish(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); +} + +static int vpif_buffer_init(struct vb2_buffer *vb) +{ + struct vpif_disp_buffer *buf = container_of(vb, + struct vpif_disp_buffer, vb); + + INIT_LIST_HEAD(&buf->list); + + return 0; +} + +static u8 channel_first_int[VPIF_NUMOBJECTS][2] = { {1, 1} }; + +static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct vpif_display_config *vpif_config_data = + vpif_dev->platform_data; + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpif = &ch->vpifparams; + unsigned long addr = 0; + unsigned long flags; + int ret; + + /* If buffer queue is empty, return error */ + spin_lock_irqsave(&common->irqlock, flags); + if (list_empty(&common->dma_queue)) { + spin_unlock_irqrestore(&common->irqlock, flags); + vpif_err("buffer queue is empty\n"); + return -EIO; + } + + /* Get the next frame from the buffer queue */ + common->next_frm = common->cur_frm = + list_entry(common->dma_queue.next, + struct vpif_disp_buffer, list); + + list_del(&common->cur_frm->list); + spin_unlock_irqrestore(&common->irqlock, flags); + /* Mark state of the current frame to active */ + common->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE; + + /* Initialize field_id and started member */ + ch->field_id = 0; + common->started = 1; + addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0); + /* Calculate the offset for Y and C data in the buffer */ + vpif_calculate_offsets(ch); + + if ((ch->vpifparams.std_info.frm_fmt && + ((common->fmt.fmt.pix.field != V4L2_FIELD_NONE) + && (common->fmt.fmt.pix.field != V4L2_FIELD_ANY))) + || (!ch->vpifparams.std_info.frm_fmt + && (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) { + vpif_err("conflict in field format and std format\n"); + return -EINVAL; + } + + /* clock settings */ + if (vpif_config_data->set_clock) { + ret = vpif_config_data->set_clock(ch->vpifparams.std_info. + ycmux_mode, ch->vpifparams.std_info.hd_sd); + if (ret < 0) { + vpif_err("can't set clock\n"); + return ret; + } + } + + /* set the parameters and addresses */ + ret = vpif_set_video_params(vpif, ch->channel_id + 2); + if (ret < 0) + return ret; + + common->started = ret; + vpif_config_addr(ch, ret); + common->set_addr((addr + common->ytop_off), + (addr + common->ybtm_off), + (addr + common->ctop_off), + (addr + common->cbtm_off)); + + /* Set interrupt for both the fields in VPIF + Register enable channel in VPIF register */ + channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + channel2_intr_assert(); + channel2_intr_enable(1); + enable_channel2(1); + if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en) + channel2_clipping_enable(1); + } + + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) + || (common->started == 2)) { + channel3_intr_assert(); + channel3_intr_enable(1); + enable_channel3(1); + if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en) + channel3_clipping_enable(1); + } + + return 0; +} + +/* abort streaming and wait for last buffer */ +static int vpif_stop_streaming(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long flags; + + if (!vb2_is_streaming(vq)) + return 0; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + /* release all active buffers */ + spin_lock_irqsave(&common->irqlock, flags); + while (!list_empty(&common->dma_queue)) { + common->next_frm = list_entry(common->dma_queue.next, + struct vpif_disp_buffer, list); + list_del(&common->next_frm->list); + vb2_buffer_done(&common->next_frm->vb, VB2_BUF_STATE_ERROR); + } + spin_unlock_irqrestore(&common->irqlock, flags); + + return 0; +} + +static struct vb2_ops video_qops = { + .queue_setup = vpif_buffer_queue_setup, + .wait_prepare = vpif_wait_prepare, + .wait_finish = vpif_wait_finish, + .buf_init = vpif_buffer_init, + .buf_prepare = vpif_buffer_prepare, + .start_streaming = vpif_start_streaming, + .stop_streaming = vpif_stop_streaming, + .buf_cleanup = vpif_buf_cleanup, + .buf_queue = vpif_buffer_queue, +}; + +static void process_progressive_mode(struct common_obj *common) +{ + unsigned long addr = 0; + + spin_lock(&common->irqlock); + /* Get the next buffer from buffer queue */ + common->next_frm = list_entry(common->dma_queue.next, + struct vpif_disp_buffer, list); + /* Remove that buffer from the buffer queue */ + list_del(&common->next_frm->list); + spin_unlock(&common->irqlock); + /* Mark status of the buffer as active */ + common->next_frm->vb.state = VB2_BUF_STATE_ACTIVE; + + /* Set top and bottom field addrs in VPIF registers */ + addr = vb2_dma_contig_plane_dma_addr(&common->next_frm->vb, 0); + common->set_addr(addr + common->ytop_off, + addr + common->ybtm_off, + addr + common->ctop_off, + addr + common->cbtm_off); +} + +static void process_interlaced_mode(int fid, struct common_obj *common) +{ + /* device field id and local field id are in sync */ + /* If this is even field */ + if (0 == fid) { + if (common->cur_frm == common->next_frm) + return; + + /* one frame is displayed If next frame is + * available, release cur_frm and move on */ + /* Copy frame display time */ + v4l2_get_timestamp(&common->cur_frm->vb.v4l2_buf.timestamp); + /* Change status of the cur_frm */ + vb2_buffer_done(&common->cur_frm->vb, + VB2_BUF_STATE_DONE); + /* Make cur_frm pointing to next_frm */ + common->cur_frm = common->next_frm; + + } else if (1 == fid) { /* odd field */ + spin_lock(&common->irqlock); + if (list_empty(&common->dma_queue) + || (common->cur_frm != common->next_frm)) { + spin_unlock(&common->irqlock); + return; + } + spin_unlock(&common->irqlock); + /* one field is displayed configure the next + * frame if it is available else hold on current + * frame */ + /* Get next from the buffer queue */ + process_progressive_mode(common); + } +} + +/* + * vpif_channel_isr: It changes status of the displayed buffer, takes next + * buffer from the queue and sets its address in VPIF registers + */ +static irqreturn_t vpif_channel_isr(int irq, void *dev_id) +{ + struct vpif_device *dev = &vpif_obj; + struct channel_obj *ch; + struct common_obj *common; + enum v4l2_field field; + int fid = -1, i; + int channel_id = 0; + + channel_id = *(int *)(dev_id); + if (!vpif_intr_status(channel_id + 2)) + return IRQ_NONE; + + ch = dev->dev[channel_id]; + field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field; + for (i = 0; i < VPIF_NUMOBJECTS; i++) { + common = &ch->common[i]; + /* If streaming is started in this channel */ + if (0 == common->started) + continue; + + if (1 == ch->vpifparams.std_info.frm_fmt) { + spin_lock(&common->irqlock); + if (list_empty(&common->dma_queue)) { + spin_unlock(&common->irqlock); + continue; + } + spin_unlock(&common->irqlock); + + /* Progressive mode */ + if (!channel_first_int[i][channel_id]) { + /* Mark status of the cur_frm to + * done and unlock semaphore on it */ + v4l2_get_timestamp(&common->cur_frm->vb. + v4l2_buf.timestamp); + vb2_buffer_done(&common->cur_frm->vb, + VB2_BUF_STATE_DONE); + /* Make cur_frm pointing to next_frm */ + common->cur_frm = common->next_frm; + } + + channel_first_int[i][channel_id] = 0; + process_progressive_mode(common); + } else { + /* Interlaced mode */ + /* If it is first interrupt, ignore it */ + + if (channel_first_int[i][channel_id]) { + channel_first_int[i][channel_id] = 0; + continue; + } + + if (0 == i) { + ch->field_id ^= 1; + /* Get field id from VPIF registers */ + fid = vpif_channel_getfid(ch->channel_id + 2); + /* If fid does not match with stored field id */ + if (fid != ch->field_id) { + /* Make them in sync */ + if (0 == fid) + ch->field_id = fid; + + return IRQ_HANDLED; + } + } + process_interlaced_mode(fid, common); + } + } + + return IRQ_HANDLED; +} + +static int vpif_update_std_info(struct channel_obj *ch) +{ + struct video_obj *vid_ch = &ch->video; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + const struct vpif_channel_config_params *config; + + int i; + + for (i = 0; i < vpif_ch_params_count; i++) { + config = &vpif_ch_params[i]; + if (config->hd_sd == 0) { + vpif_dbg(2, debug, "SD format\n"); + if (config->stdid & vid_ch->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } + } + + if (i == vpif_ch_params_count) { + vpif_dbg(1, debug, "Format not found\n"); + return -EINVAL; + } + + return 0; +} + +static int vpif_update_resolution(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + + if (!vid_ch->stdid && !vid_ch->dv_timings.bt.height) + return -EINVAL; + + if (vid_ch->stdid) { + if (vpif_update_std_info(ch)) + return -EINVAL; + } + + common->fmt.fmt.pix.width = std_info->width; + common->fmt.fmt.pix.height = std_info->height; + vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n", + common->fmt.fmt.pix.width, common->fmt.fmt.pix.height); + + /* Set height and width paramateres */ + common->height = std_info->height; + common->width = std_info->width; + + return 0; +} + +/* + * vpif_calculate_offsets: This function calculates buffers offset for Y and C + * in the top and bottom field + */ +static void vpif_calculate_offsets(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpifparams = &ch->vpifparams; + enum v4l2_field field = common->fmt.fmt.pix.field; + struct video_obj *vid_ch = &ch->video; + unsigned int hpitch, vpitch, sizeimage; + + if (V4L2_FIELD_ANY == common->fmt.fmt.pix.field) { + if (ch->vpifparams.std_info.frm_fmt) + vid_ch->buf_field = V4L2_FIELD_NONE; + else + vid_ch->buf_field = V4L2_FIELD_INTERLACED; + } else { + vid_ch->buf_field = common->fmt.fmt.pix.field; + } + + sizeimage = common->fmt.fmt.pix.sizeimage; + + hpitch = common->fmt.fmt.pix.bytesperline; + vpitch = sizeimage / (hpitch * 2); + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + common->ytop_off = 0; + common->ybtm_off = hpitch; + common->ctop_off = sizeimage / 2; + common->cbtm_off = sizeimage / 2 + hpitch; + } else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) { + common->ytop_off = 0; + common->ybtm_off = sizeimage / 4; + common->ctop_off = sizeimage / 2; + common->cbtm_off = common->ctop_off + sizeimage / 4; + } else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) { + common->ybtm_off = 0; + common->ytop_off = sizeimage / 4; + common->cbtm_off = sizeimage / 2; + common->ctop_off = common->cbtm_off + sizeimage / 4; + } + + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + vpifparams->video_params.storage_mode = 1; + } else { + vpifparams->video_params.storage_mode = 0; + } + + if (ch->vpifparams.std_info.frm_fmt == 1) { + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } else { + if ((field == V4L2_FIELD_ANY) || + (field == V4L2_FIELD_INTERLACED)) + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline * 2; + else + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } + + ch->vpifparams.video_params.stdid = ch->vpifparams.std_info.stdid; +} + +static void vpif_config_format(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + common->fmt.fmt.pix.field = V4L2_FIELD_ANY; + if (config_params.numbuffers[ch->channel_id] == 0) + common->memory = V4L2_MEMORY_USERPTR; + else + common->memory = V4L2_MEMORY_MMAP; + + common->fmt.fmt.pix.sizeimage = + config_params.channel_bufsize[ch->channel_id]; + common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P; + common->fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; +} + +static int vpif_check_format(struct channel_obj *ch, + struct v4l2_pix_format *pixfmt) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + enum v4l2_field field = pixfmt->field; + u32 sizeimage, hpitch, vpitch; + + if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) + goto invalid_fmt_exit; + + if (!(VPIF_VALID_FIELD(field))) + goto invalid_fmt_exit; + + if (pixfmt->bytesperline <= 0) + goto invalid_pitch_exit; + + sizeimage = pixfmt->sizeimage; + + if (vpif_update_resolution(ch)) + return -EINVAL; + + hpitch = pixfmt->bytesperline; + vpitch = sizeimage / (hpitch * 2); + + /* Check for valid value of pitch */ + if ((hpitch < ch->vpifparams.std_info.width) || + (vpitch < ch->vpifparams.std_info.height)) + goto invalid_pitch_exit; + + /* Check for 8 byte alignment */ + if (!ISALIGNED(hpitch)) { + vpif_err("invalid pitch alignment\n"); + return -EINVAL; + } + pixfmt->width = common->fmt.fmt.pix.width; + pixfmt->height = common->fmt.fmt.pix.height; + + return 0; + +invalid_fmt_exit: + vpif_err("invalid field format\n"); + return -EINVAL; + +invalid_pitch_exit: + vpif_err("invalid pitch\n"); + return -EINVAL; +} + +static void vpif_config_addr(struct channel_obj *ch, int muxmode) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (VPIF_CHANNEL3_VIDEO == ch->channel_id) { + common->set_addr = ch3_set_videobuf_addr; + } else { + if (2 == muxmode) + common->set_addr = ch2_set_videobuf_addr_yc_nmux; + else + common->set_addr = ch2_set_videobuf_addr; + } +} + +/* + * vpif_mmap: It is used to map kernel space buffers into user spaces + */ +static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + int ret; + + vpif_dbg(2, debug, "vpif_mmap\n"); + + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + ret = vb2_mmap(&common->buffer_queue, vma); + mutex_unlock(&common->lock); + return ret; +} + +/* + * vpif_poll: It is used for select/poll system call + */ +static unsigned int vpif_poll(struct file *filep, poll_table *wait) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + unsigned int res = 0; + + if (common->started) { + mutex_lock(&common->lock); + res = vb2_poll(&common->buffer_queue, filep, wait); + mutex_unlock(&common->lock); + } + + return res; +} + +/* + * vpif_open: It creates object of file handle structure and stores it in + * private_data member of filepointer + */ +static int vpif_open(struct file *filep) +{ + struct video_device *vdev = video_devdata(filep); + struct channel_obj *ch = video_get_drvdata(vdev); + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_fh *fh; + + /* Allocate memory for the file handle object */ + fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL); + if (fh == NULL) { + vpif_err("unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + if (mutex_lock_interruptible(&common->lock)) { + kfree(fh); + return -ERESTARTSYS; + } + /* store pointer to fh in private_data member of filep */ + filep->private_data = fh; + fh->channel = ch; + fh->initialized = 0; + if (!ch->initialized) { + fh->initialized = 1; + ch->initialized = 1; + memset(&ch->vpifparams, 0, sizeof(ch->vpifparams)); + } + + /* Increment channel usrs counter */ + atomic_inc(&ch->usrs); + /* Set io_allowed[VPIF_VIDEO_INDEX] member to false */ + fh->io_allowed[VPIF_VIDEO_INDEX] = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&ch->prio, &fh->prio); + mutex_unlock(&common->lock); + + return 0; +} + +/* + * vpif_release: This function deletes buffer queue, frees the buffers and + * the vpif file handle + */ +static int vpif_release(struct file *filep) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + mutex_lock(&common->lock); + /* if this instance is doing IO */ + if (fh->io_allowed[VPIF_VIDEO_INDEX]) { + /* Reset io_usrs member of channel object */ + common->io_usrs = 0; + /* Disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel3(0); + channel3_intr_enable(0); + } + common->started = 0; + + /* Free buffers allocated */ + vb2_queue_release(&common->buffer_queue); + vb2_dma_contig_cleanup_ctx(common->alloc_ctx); + + common->numbuffers = + config_params.numbuffers[ch->channel_id]; + } + + /* Decrement channel usrs counter */ + atomic_dec(&ch->usrs); + /* If this file handle has initialize encoder device, reset it */ + if (fh->initialized) + ch->initialized = 0; + + /* Close the priority */ + v4l2_prio_close(&ch->prio, fh->prio); + filep->private_data = NULL; + fh->initialized = 0; + mutex_unlock(&common->lock); + kfree(fh); + + return 0; +} + +/* functions implementing ioctls */ +/** + * vpif_querycap() - QUERYCAP handler + * @file: file ptr + * @priv: file handle + * @cap: ptr to v4l2_capability structure + */ +static int vpif_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpif_display_config *config = vpif_dev->platform_data; + + cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + snprintf(cap->driver, sizeof(cap->driver), "%s", dev_name(vpif_dev)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + dev_name(vpif_dev)); + strlcpy(cap->card, config->card_name, sizeof(cap->card)); + + return 0; +} + +static int vpif_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + if (fmt->index != 0) { + vpif_err("Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + strcpy(fmt->description, "YCbCr4:2:2 YC Planar"); + fmt->pixelformat = V4L2_PIX_FMT_YUV422P; + + return 0; +} + +static int vpif_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + /* Check the validity of the buffer type */ + if (common->fmt.type != fmt->type) + return -EINVAL; + + if (vpif_update_resolution(ch)) + return -EINVAL; + *fmt = common->fmt; + return 0; +} + +static int vpif_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct v4l2_pix_format *pixfmt; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if ((VPIF_CHANNEL2_VIDEO == ch->channel_id) + || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + + /* Check for the priority */ + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (0 != ret) + return ret; + fh->initialized = 1; + } + + if (common->started) { + vpif_dbg(1, debug, "Streaming in progress\n"); + return -EBUSY; + } + + pixfmt = &fmt->fmt.pix; + /* Check for valid field format */ + ret = vpif_check_format(ch, pixfmt); + if (ret) + return ret; + + /* store the pix format in the channel object */ + common->fmt.fmt.pix = *pixfmt; + /* store the format in the channel object */ + common->fmt = *fmt; + return 0; +} + +static int vpif_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + int ret = 0; + + ret = vpif_check_format(ch, pixfmt); + if (ret) { + *pixfmt = common->fmt.fmt.pix; + pixfmt->sizeimage = pixfmt->width * pixfmt->height * 2; + } + + return ret; +} + +static int vpif_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + enum v4l2_field field; + struct vb2_queue *q; + u8 index = 0; + int ret; + + /* This file handle has not initialized the channel, + It is not allowed to do settings */ + if ((VPIF_CHANNEL2_VIDEO == ch->channel_id) + || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_err("Channel Busy\n"); + return -EBUSY; + } + } + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != reqbuf->type) + return -EINVAL; + + index = VPIF_VIDEO_INDEX; + + common = &ch->common[index]; + + if (common->fmt.type != reqbuf->type || !vpif_dev) + return -EINVAL; + if (0 != common->io_usrs) + return -EBUSY; + + if (reqbuf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + if (common->fmt.fmt.pix.field == V4L2_FIELD_ANY) + field = V4L2_FIELD_INTERLACED; + else + field = common->fmt.fmt.pix.field; + } else { + field = V4L2_VBI_INTERLACED; + } + /* Initialize videobuf2 queue as per the buffer type */ + common->alloc_ctx = vb2_dma_contig_init_ctx(vpif_dev); + if (IS_ERR(common->alloc_ctx)) { + vpif_err("Failed to get the context\n"); + return PTR_ERR(common->alloc_ctx); + } + q = &common->buffer_queue; + q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = fh; + q->ops = &video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct vpif_disp_buffer); + q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + + ret = vb2_queue_init(q); + if (ret) { + vpif_err("vpif_display: vb2_queue_init() failed\n"); + vb2_dma_contig_cleanup_ctx(common->alloc_ctx); + return ret; + } + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed[index] = 1; + /* Increment io usrs member of channel object to 1 */ + common->io_usrs = 1; + /* Store type of memory requested in channel object */ + common->memory = reqbuf->memory; + INIT_LIST_HEAD(&common->dma_queue); + /* Allocate buffers */ + return vb2_reqbufs(&common->buffer_queue, reqbuf); +} + +static int vpif_querybuf(struct file *file, void *priv, + struct v4l2_buffer *tbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (common->fmt.type != tbuf->type) + return -EINVAL; + + return vb2_querybuf(&common->buffer_queue, tbuf); +} + +static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct vpif_fh *fh = NULL; + struct channel_obj *ch = NULL; + struct common_obj *common = NULL; + + if (!buf || !priv) + return -EINVAL; + + fh = priv; + ch = fh->channel; + if (!ch) + return -EINVAL; + + common = &(ch->common[VPIF_VIDEO_INDEX]); + if (common->fmt.type != buf->type) + return -EINVAL; + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + return vb2_qbuf(&common->buffer_queue, buf); +} + +static int vpif_s_std(struct file *file, void *priv, v4l2_std_id std_id) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (!(std_id & VPIF_V4L2_STD)) + return -EINVAL; + + if (common->started) { + vpif_err("streaming in progress\n"); + return -EBUSY; + } + + /* Call encoder subdevice function to set the standard */ + ch->video.stdid = std_id; + memset(&ch->video.dv_timings, 0, sizeof(ch->video.dv_timings)); + /* Get the information about the standard */ + if (vpif_update_resolution(ch)) + return -EINVAL; + + if ((ch->vpifparams.std_info.width * + ch->vpifparams.std_info.height * 2) > + config_params.channel_bufsize[ch->channel_id]) { + vpif_err("invalid std for this size\n"); + return -EINVAL; + } + + common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width; + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, + s_std_output, std_id); + if (ret < 0) { + vpif_err("Failed to set output standard\n"); + return ret; + } + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core, + s_std, std_id); + if (ret < 0) + vpif_err("Failed to set standard for sub devices\n"); + return ret; +} + +static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *std = ch->video.stdid; + return 0; +} + +static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + return vb2_dqbuf(&common->buffer_queue, p, + (file->f_flags & O_NONBLOCK)); +} + +static int vpif_streamon(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id]; + int ret = 0; + + if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + vpif_err("buffer type not supported\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + /* If Streaming is already started, return error */ + if (common->started) { + vpif_err("channel->started\n"); + return -EBUSY; + } + + if ((ch->channel_id == VPIF_CHANNEL2_VIDEO + && oth_ch->common[VPIF_VIDEO_INDEX].started && + ch->vpifparams.std_info.ycmux_mode == 0) + || ((ch->channel_id == VPIF_CHANNEL3_VIDEO) + && (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) { + vpif_err("other channel is using\n"); + return -EBUSY; + } + + ret = vpif_check_format(ch, &common->fmt.fmt.pix); + if (ret < 0) + return ret; + + /* Call vb2_streamon to start streaming in videobuf2 */ + ret = vb2_streamon(&common->buffer_queue, buftype); + if (ret < 0) { + vpif_err("vb2_streamon\n"); + return ret; + } + + return ret; +} + +static int vpif_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_display_config *vpif_config_data = + vpif_dev->platform_data; + + if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + vpif_err("buffer type not supported\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + if (!common->started) { + vpif_err("channel->started\n"); + return -EINVAL; + } + + if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + /* disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + if (vpif_config_data-> + chan_config[VPIF_CHANNEL2_VIDEO].clip_en) + channel2_clipping_enable(0); + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + if (vpif_config_data-> + chan_config[VPIF_CHANNEL3_VIDEO].clip_en) + channel3_clipping_enable(0); + enable_channel3(0); + channel3_intr_enable(0); + } + } + + common->started = 0; + return vb2_streamoff(&common->buffer_queue, buftype); +} + +static int vpif_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != crop->type) + return -EINVAL; + + crop->bounds.left = crop->bounds.top = 0; + crop->defrect.left = crop->defrect.top = 0; + crop->defrect.height = crop->bounds.height = common->height; + crop->defrect.width = crop->bounds.width = common->width; + + return 0; +} + +static int vpif_enum_output(struct file *file, void *fh, + struct v4l2_output *output) +{ + + struct vpif_display_config *config = vpif_dev->platform_data; + struct vpif_display_chan_config *chan_cfg; + struct vpif_fh *vpif_handler = fh; + struct channel_obj *ch = vpif_handler->channel; + + chan_cfg = &config->chan_config[ch->channel_id]; + if (output->index >= chan_cfg->output_count) { + vpif_dbg(1, debug, "Invalid output index\n"); + return -EINVAL; + } + + *output = chan_cfg->outputs[output->index].output; + return 0; +} + +/** + * vpif_output_to_subdev() - Maps output to sub device + * @vpif_cfg - global config ptr + * @chan_cfg - channel config ptr + * @index - Given output index from application + * + * lookup the sub device information for a given output index. + * we report all the output to application. output table also + * has sub device name for the each output + */ +static int +vpif_output_to_subdev(struct vpif_display_config *vpif_cfg, + struct vpif_display_chan_config *chan_cfg, int index) +{ + struct vpif_subdev_info *subdev_info; + const char *subdev_name; + int i; + + vpif_dbg(2, debug, "vpif_output_to_subdev\n"); + + if (chan_cfg->outputs == NULL) + return -1; + + subdev_name = chan_cfg->outputs[index].subdev_name; + if (subdev_name == NULL) + return -1; + + /* loop through the sub device list to get the sub device info */ + for (i = 0; i < vpif_cfg->subdev_count; i++) { + subdev_info = &vpif_cfg->subdevinfo[i]; + if (!strcmp(subdev_info->name, subdev_name)) + return i; + } + return -1; +} + +/** + * vpif_set_output() - Select an output + * @vpif_cfg - global config ptr + * @ch - channel + * @index - Given output index from application + * + * Select the given output. + */ +static int vpif_set_output(struct vpif_display_config *vpif_cfg, + struct channel_obj *ch, int index) +{ + struct vpif_display_chan_config *chan_cfg = + &vpif_cfg->chan_config[ch->channel_id]; + struct vpif_subdev_info *subdev_info = NULL; + struct v4l2_subdev *sd = NULL; + u32 input = 0, output = 0; + int sd_index; + int ret; + + sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index); + if (sd_index >= 0) { + sd = vpif_obj.sd[sd_index]; + subdev_info = &vpif_cfg->subdevinfo[sd_index]; + } + + if (sd) { + input = chan_cfg->outputs[index].input_route; + output = chan_cfg->outputs[index].output_route; + ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0); + if (ret < 0 && ret != -ENOIOCTLCMD) { + vpif_err("Failed to set output\n"); + return ret; + } + + } + ch->output_idx = index; + ch->sd = sd; + if (chan_cfg->outputs != NULL) + /* update tvnorms from the sub device output info */ + ch->video_dev->tvnorms = chan_cfg->outputs[index].output.std; + return 0; +} + +static int vpif_s_output(struct file *file, void *priv, unsigned int i) +{ + struct vpif_display_config *config = vpif_dev->platform_data; + struct vpif_display_chan_config *chan_cfg; + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + chan_cfg = &config->chan_config[ch->channel_id]; + + if (i >= chan_cfg->output_count) + return -EINVAL; + + if (common->started) { + vpif_err("Streaming in progress\n"); + return -EBUSY; + } + + return vpif_set_output(config, ch, i); +} + +static int vpif_g_output(struct file *file, void *priv, unsigned int *i) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *i = ch->output_idx; + + return 0; +} + +static int vpif_g_priority(struct file *file, void *priv, enum v4l2_priority *p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *p = v4l2_prio_max(&ch->prio); + + return 0; +} + +static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_prio_change(&ch->prio, &fh->prio, p); +} + +/** + * vpif_enum_dv_timings() - ENUM_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: input timings + */ +static int +vpif_enum_dv_timings(struct file *file, void *priv, + struct v4l2_enum_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + int ret; + + ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings); + if (ret == -ENOIOCTLCMD || ret == -ENODEV) + return -EINVAL; + return ret; +} + +/** + * vpif_s_dv_timings() - S_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->dv_timings.bt; + int ret; + + if (timings->type != V4L2_DV_BT_656_1120) { + vpif_dbg(2, debug, "Timing type not defined\n"); + return -EINVAL; + } + + /* Configure subdevice timings, if any */ + ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD || ret == -ENODEV) + ret = 0; + if (ret < 0) { + vpif_dbg(2, debug, "Error setting custom DV timings\n"); + return ret; + } + + if (!(timings->bt.width && timings->bt.height && + (timings->bt.hbackporch || + timings->bt.hfrontporch || + timings->bt.hsync) && + timings->bt.vfrontporch && + (timings->bt.vbackporch || + timings->bt.vsync))) { + vpif_dbg(2, debug, "Timings for width, height, " + "horizontal back porch, horizontal sync, " + "horizontal front porch, vertical back porch, " + "vertical sync and vertical back porch " + "must be defined\n"); + return -EINVAL; + } + + vid_ch->dv_timings = *timings; + + /* Configure video port timings */ + + std_info->eav2sav = bt->hbackporch + bt->hfrontporch + + bt->hsync - 8; + std_info->sav2eav = bt->width; + + std_info->l1 = 1; + std_info->l3 = bt->vsync + bt->vbackporch + 1; + + if (bt->interlaced) { + if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) { + std_info->vsize = bt->height * 2 + + bt->vfrontporch + bt->vsync + bt->vbackporch + + bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + std_info->l5 = std_info->vsize/2 - + (bt->vfrontporch - 1); + std_info->l7 = std_info->vsize/2 + 1; + std_info->l9 = std_info->l7 + bt->il_vsync + + bt->il_vbackporch + 1; + std_info->l11 = std_info->vsize - + (bt->il_vfrontporch - 1); + } else { + vpif_dbg(2, debug, "Required timing values for " + "interlaced BT format missing\n"); + return -EINVAL; + } + } else { + std_info->vsize = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + std_info->l5 = std_info->vsize - (bt->vfrontporch - 1); + } + strncpy(std_info->name, "Custom timings BT656/1120", + VPIF_MAX_NAME); + std_info->width = bt->width; + std_info->height = bt->height; + std_info->frm_fmt = bt->interlaced ? 0 : 1; + std_info->ycmux_mode = 0; + std_info->capture_format = 0; + std_info->vbi_supported = 0; + std_info->hd_sd = 1; + std_info->stdid = 0; + vid_ch->stdid = 0; + + return 0; +} + +/** + * vpif_g_dv_timings() - G_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + *timings = vid_ch->dv_timings; + + return 0; +} + +/* + * vpif_g_chip_ident() - Identify the chip + * @file: file ptr + * @priv: file handle + * @chip: chip identity + * + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) { + vpif_dbg(2, debug, "match_type is invalid.\n"); + return -EINVAL; + } + + return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * vpif_dbg_g_register() - Read register + * @file: file ptr + * @priv: file handle + * @reg: register to be read + * + * Debugging only + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(ch->sd, core, g_register, reg); +} + +/* + * vpif_dbg_s_register() - Write to register + * @file: file ptr + * @priv: file handle + * @reg: register to be modified + * + * Debugging only + * Returns zero or -EINVAL if write operations fails. + */ +static int vpif_dbg_s_register(struct file *file, void *priv, + const struct v4l2_dbg_register *reg) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(ch->sd, core, s_register, reg); +} +#endif + +/* + * vpif_log_status() - Status information + * @file: file ptr + * @priv: file handle + * + * Returns zero. + */ +static int vpif_log_status(struct file *filep, void *priv) +{ + /* status for sub devices */ + v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status); + + return 0; +} + +/* vpif display ioctl operations */ +static const struct v4l2_ioctl_ops vpif_ioctl_ops = { + .vidioc_querycap = vpif_querycap, + .vidioc_g_priority = vpif_g_priority, + .vidioc_s_priority = vpif_s_priority, + .vidioc_enum_fmt_vid_out = vpif_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vpif_g_fmt_vid_out, + .vidioc_s_fmt_vid_out = vpif_s_fmt_vid_out, + .vidioc_try_fmt_vid_out = vpif_try_fmt_vid_out, + .vidioc_reqbufs = vpif_reqbufs, + .vidioc_querybuf = vpif_querybuf, + .vidioc_qbuf = vpif_qbuf, + .vidioc_dqbuf = vpif_dqbuf, + .vidioc_streamon = vpif_streamon, + .vidioc_streamoff = vpif_streamoff, + .vidioc_s_std = vpif_s_std, + .vidioc_g_std = vpif_g_std, + .vidioc_enum_output = vpif_enum_output, + .vidioc_s_output = vpif_s_output, + .vidioc_g_output = vpif_g_output, + .vidioc_cropcap = vpif_cropcap, + .vidioc_enum_dv_timings = vpif_enum_dv_timings, + .vidioc_s_dv_timings = vpif_s_dv_timings, + .vidioc_g_dv_timings = vpif_g_dv_timings, + .vidioc_g_chip_ident = vpif_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpif_dbg_g_register, + .vidioc_s_register = vpif_dbg_s_register, +#endif + .vidioc_log_status = vpif_log_status, +}; + +static const struct v4l2_file_operations vpif_fops = { + .owner = THIS_MODULE, + .open = vpif_open, + .release = vpif_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpif_mmap, + .poll = vpif_poll +}; + +static struct video_device vpif_video_template = { + .name = "vpif", + .fops = &vpif_fops, + .ioctl_ops = &vpif_ioctl_ops, +}; + +/*Configure the channels, buffer sizei, request irq */ +static int initialize_vpif(void) +{ + int free_channel_objects_index; + int free_buffer_channel_index; + int free_buffer_index; + int err = 0, i, j; + + /* Default number of buffers should be 3 */ + if ((ch2_numbuffers > 0) && + (ch2_numbuffers < config_params.min_numbuffers)) + ch2_numbuffers = config_params.min_numbuffers; + if ((ch3_numbuffers > 0) && + (ch3_numbuffers < config_params.min_numbuffers)) + ch3_numbuffers = config_params.min_numbuffers; + + /* Set buffer size to min buffers size if invalid buffer size is + * given */ + if (ch2_bufsize < config_params.min_bufsize[VPIF_CHANNEL2_VIDEO]) + ch2_bufsize = + config_params.min_bufsize[VPIF_CHANNEL2_VIDEO]; + if (ch3_bufsize < config_params.min_bufsize[VPIF_CHANNEL3_VIDEO]) + ch3_bufsize = + config_params.min_bufsize[VPIF_CHANNEL3_VIDEO]; + + config_params.numbuffers[VPIF_CHANNEL2_VIDEO] = ch2_numbuffers; + + if (ch2_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL2_VIDEO] = + ch2_bufsize; + } + config_params.numbuffers[VPIF_CHANNEL3_VIDEO] = ch3_numbuffers; + + if (ch3_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL3_VIDEO] = + ch3_bufsize; + } + + /* Allocate memory for six channel objects */ + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + vpif_obj.dev[i] = + kzalloc(sizeof(struct channel_obj), GFP_KERNEL); + /* If memory allocation fails, return error */ + if (!vpif_obj.dev[i]) { + free_channel_objects_index = i; + err = -ENOMEM; + goto vpif_init_free_channel_objects; + } + } + + free_channel_objects_index = VPIF_DISPLAY_MAX_DEVICES; + free_buffer_channel_index = VPIF_DISPLAY_NUM_CHANNELS; + free_buffer_index = config_params.numbuffers[i - 1]; + + return 0; + +vpif_init_free_channel_objects: + for (j = 0; j < free_channel_objects_index; j++) + kfree(vpif_obj.dev[j]); + return err; +} + +/* + * vpif_probe: This function creates device entries by register itself to the + * V4L2 driver and initializes fields of each channel objects + */ +static __init int vpif_probe(struct platform_device *pdev) +{ + struct vpif_subdev_info *subdevdata; + struct vpif_display_config *config; + int i, j = 0, k, err = 0; + int res_idx = 0; + struct i2c_adapter *i2c_adap; + struct common_obj *common; + struct channel_obj *ch; + struct video_device *vfd; + struct resource *res; + int subdev_count; + size_t size; + + vpif_dev = &pdev->dev; + err = initialize_vpif(); + + if (err) { + v4l2_err(vpif_dev->driver, "Error initializing vpif\n"); + return err; + } + + err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev); + if (err) { + v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n"); + return err; + } + + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, res_idx))) { + for (i = res->start; i <= res->end; i++) { + if (request_irq(i, vpif_channel_isr, IRQF_SHARED, + "VPIF_Display", (void *) + (&vpif_obj.dev[res_idx]->channel_id))) { + err = -EBUSY; + for (j = 0; j < i; j++) + free_irq(j, (void *) + (&vpif_obj.dev[res_idx]->channel_id)); + goto vpif_int_err; + } + } + res_idx++; + } + + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (vfd == NULL) { + for (j = 0; j < i; j++) { + ch = vpif_obj.dev[j]; + video_device_release(ch->video_dev); + } + err = -ENOMEM; + goto vpif_int_err; + } + + /* Initialize field of video device */ + *vfd = vpif_video_template; + vfd->v4l2_dev = &vpif_obj.v4l2_dev; + vfd->release = video_device_release; + vfd->vfl_dir = VFL_DIR_TX; + snprintf(vfd->name, sizeof(vfd->name), + "VPIF_Display_DRIVER_V%s", + VPIF_DISPLAY_VERSION); + + /* Set video_dev to the video device */ + ch->video_dev = vfd; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) { + size = resource_size(res); + /* The resources are divided into two equal memory and when + * we have HD output we can add them together + */ + for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + ch->channel_id = j; + + /* only enabled if second resource exists */ + config_params.video_limit[ch->channel_id] = 0; + if (size) + config_params.video_limit[ch->channel_id] = + size/2; + } + } + + i2c_adap = i2c_get_adapter(1); + config = pdev->dev.platform_data; + subdev_count = config->subdev_count; + subdevdata = config->subdevinfo; + vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count, + GFP_KERNEL); + if (vpif_obj.sd == NULL) { + vpif_err("unable to allocate memory for subdevice pointers\n"); + err = -ENOMEM; + goto vpif_sd_error; + } + + for (i = 0; i < subdev_count; i++) { + vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, + i2c_adap, + &subdevdata[i].board_info, + NULL); + if (!vpif_obj.sd[i]) { + vpif_err("Error registering v4l2 subdevice\n"); + goto probe_subdev_out; + } + + if (vpif_obj.sd[i]) + vpif_obj.sd[i]->grp_id = 1 << i; + } + + for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + /* Initialize field of the channel objects */ + atomic_set(&ch->usrs, 0); + for (k = 0; k < VPIF_NUMOBJECTS; k++) { + ch->common[k].numbuffers = 0; + common = &ch->common[k]; + common->io_usrs = 0; + common->started = 0; + spin_lock_init(&common->irqlock); + mutex_init(&common->lock); + common->numbuffers = 0; + common->set_addr = NULL; + common->ytop_off = common->ybtm_off = 0; + common->ctop_off = common->cbtm_off = 0; + common->cur_frm = common->next_frm = NULL; + memset(&common->fmt, 0, sizeof(common->fmt)); + common->numbuffers = config_params.numbuffers[k]; + + } + ch->initialized = 0; + if (subdev_count) + ch->sd = vpif_obj.sd[0]; + ch->channel_id = j; + if (j < 2) + ch->common[VPIF_VIDEO_INDEX].numbuffers = + config_params.numbuffers[ch->channel_id]; + else + ch->common[VPIF_VIDEO_INDEX].numbuffers = 0; + + memset(&ch->vpifparams, 0, sizeof(ch->vpifparams)); + + /* Initialize prio member of channel object */ + v4l2_prio_init(&ch->prio); + ch->common[VPIF_VIDEO_INDEX].fmt.type = + V4L2_BUF_TYPE_VIDEO_OUTPUT; + ch->video_dev->lock = &common->lock; + video_set_drvdata(ch->video_dev, ch); + + /* select output 0 */ + err = vpif_set_output(config, ch, 0); + if (err) + goto probe_out; + + /* register video device */ + vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n", + (int)ch, (int)&ch->video_dev); + + err = video_register_device(ch->video_dev, + VFL_TYPE_GRABBER, (j ? 3 : 2)); + if (err < 0) + goto probe_out; + } + + v4l2_info(&vpif_obj.v4l2_dev, + " VPIF display driver initialized\n"); + return 0; + +probe_out: + for (k = 0; k < j; k++) { + ch = vpif_obj.dev[k]; + video_unregister_device(ch->video_dev); + video_device_release(ch->video_dev); + ch->video_dev = NULL; + } +probe_subdev_out: + kfree(vpif_obj.sd); +vpif_sd_error: + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + ch = vpif_obj.dev[i]; + /* Note: does nothing if ch->video_dev == NULL */ + video_device_release(ch->video_dev); + } +vpif_int_err: + v4l2_device_unregister(&vpif_obj.v4l2_dev); + vpif_err("VPIF IRQ request failed\n"); + for (i = 0; i < res_idx; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + for (j = res->start; j <= res->end; j++) + free_irq(j, (void *)(&vpif_obj.dev[i]->channel_id)); + } + + return err; +} + +/* + * vpif_remove: It un-register channels from V4L2 driver + */ +static int vpif_remove(struct platform_device *device) +{ + struct channel_obj *ch; + int i; + + v4l2_device_unregister(&vpif_obj.v4l2_dev); + + /* un-register device */ + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + /* Unregister video device */ + video_unregister_device(ch->video_dev); + + ch->video_dev = NULL; + } + + return 0; +} + +#ifdef CONFIG_PM +static int vpif_suspend(struct device *dev) +{ + struct common_obj *common; + struct channel_obj *ch; + int i; + + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); + if (atomic_read(&ch->usrs) && common->io_usrs) { + /* Disable channel */ + if (ch->channel_id == VPIF_CHANNEL2_VIDEO) { + enable_channel2(0); + channel2_intr_enable(0); + } + if (ch->channel_id == VPIF_CHANNEL3_VIDEO || + common->started == 2) { + enable_channel3(0); + channel3_intr_enable(0); + } + } + mutex_unlock(&common->lock); + } + + return 0; +} + +static int vpif_resume(struct device *dev) +{ + + struct common_obj *common; + struct channel_obj *ch; + int i; + + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); + if (atomic_read(&ch->usrs) && common->io_usrs) { + /* Enable channel */ + if (ch->channel_id == VPIF_CHANNEL2_VIDEO) { + enable_channel2(1); + channel2_intr_enable(1); + } + if (ch->channel_id == VPIF_CHANNEL3_VIDEO || + common->started == 2) { + enable_channel3(1); + channel3_intr_enable(1); + } + } + mutex_unlock(&common->lock); + } + + return 0; +} + +static const struct dev_pm_ops vpif_pm = { + .suspend = vpif_suspend, + .resume = vpif_resume, +}; + +#define vpif_pm_ops (&vpif_pm) +#else +#define vpif_pm_ops NULL +#endif + +static __refdata struct platform_driver vpif_driver = { + .driver = { + .name = "vpif_display", + .owner = THIS_MODULE, + .pm = vpif_pm_ops, + }, + .probe = vpif_probe, + .remove = vpif_remove, +}; + +static __init int vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} + +/* + * vpif_cleanup: This function un-registers device and driver to the kernel, + * frees requested irq handler and de-allocates memory allocated for channel + * objects. + */ +static void vpif_cleanup(void) +{ + struct platform_device *pdev; + struct resource *res; + int irq_num; + int i = 0; + + pdev = container_of(vpif_dev, struct platform_device, dev); + + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, + (void *)(&vpif_obj.dev[i]->channel_id)); + i++; + } + + platform_driver_unregister(&vpif_driver); + kfree(vpif_obj.sd); + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) + kfree(vpif_obj.dev[i]); +} + +module_init(vpif_init); +module_exit(vpif_cleanup); diff --git a/drivers/media/platform/davinci/vpif_display.h b/drivers/media/platform/davinci/vpif_display.h new file mode 100644 index 00000000..a5a18f74 --- /dev/null +++ b/drivers/media/platform/davinci/vpif_display.h @@ -0,0 +1,165 @@ +/* + * VPIF display header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef DAVINCIHD_DISPLAY_H +#define DAVINCIHD_DISPLAY_H + +/* Header files */ +#include +#include +#include +#include +#include + +#include "vpif.h" + +/* Macros */ +#define VPIF_DISPLAY_VERSION "0.0.2" + +#define VPIF_VALID_FIELD(field) \ + (((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \ + (((V4L2_FIELD_INTERLACED == field) || (V4L2_FIELD_SEQ_TB == field)) || \ + (V4L2_FIELD_SEQ_BT == field))) + +#define VPIF_DISPLAY_MAX_DEVICES (2) +#define VPIF_SLICED_BUF_SIZE (256) +#define VPIF_SLICED_MAX_SERVICES (3) +#define VPIF_VIDEO_INDEX (0) +#define VPIF_VBI_INDEX (1) +#define VPIF_HBI_INDEX (2) + +/* Setting it to 1 as HBI/VBI support yet to be added , else 3*/ +#define VPIF_NUMOBJECTS (1) + +/* Macros */ +#define ISALIGNED(a) (0 == ((a) & 7)) + +/* enumerated data types */ +/* Enumerated data type to give id to each device per channel */ +enum vpif_channel_id { + VPIF_CHANNEL2_VIDEO = 0, /* Channel2 Video */ + VPIF_CHANNEL3_VIDEO, /* Channel3 Video */ +}; + +/* structures */ + +struct video_obj { + enum v4l2_field buf_field; + u32 latest_only; /* indicate whether to return + * most recent displayed frame only */ + v4l2_std_id stdid; /* Currently selected or default + * standard */ + struct v4l2_dv_timings dv_timings; +}; + +struct vpif_disp_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +struct common_obj { + /* Buffer specific parameters */ + u8 *fbuffers[VIDEO_MAX_FRAME]; /* List of buffer pointers for + * storing frames */ + u32 numbuffers; /* number of buffers */ + struct vpif_disp_buffer *cur_frm; /* Pointer pointing to current + * vb2_buffer */ + struct vpif_disp_buffer *next_frm; /* Pointer pointing to next + * vb2_buffer */ + enum v4l2_memory memory; /* This field keeps track of + * type of buffer exchange + * method user has selected */ + struct v4l2_format fmt; /* Used to store the format */ + struct vb2_queue buffer_queue; /* Buffer queue used in + * video-buf */ + /* allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + + struct list_head dma_queue; /* Queue of filled frames */ + spinlock_t irqlock; /* Used in video-buf */ + + /* channel specific parameters */ + struct mutex lock; /* lock used to access this + * structure */ + u32 io_usrs; /* number of users performing + * IO */ + u8 started; /* Indicates whether streaming + * started */ + u32 ytop_off; /* offset of Y top from the + * starting of the buffer */ + u32 ybtm_off; /* offset of Y bottom from the + * starting of the buffer */ + u32 ctop_off; /* offset of C top from the + * starting of the buffer */ + u32 cbtm_off; /* offset of C bottom from the + * starting of the buffer */ + /* Function pointer to set the addresses */ + void (*set_addr) (unsigned long, unsigned long, + unsigned long, unsigned long); + u32 height; + u32 width; +}; + +struct channel_obj { + /* V4l2 specific parameters */ + struct video_device *video_dev; /* Identifies video device for + * this channel */ + struct v4l2_prio_state prio; /* Used to keep track of state of + * the priority */ + atomic_t usrs; /* number of open instances of + * the channel */ + u32 field_id; /* Indicates id of the field + * which is being displayed */ + u8 initialized; /* flag to indicate whether + * encoder is initialized */ + u32 output_idx; /* Current output index */ + struct v4l2_subdev *sd; /* Current output subdev(may be NULL) */ + + enum vpif_channel_id channel_id;/* Identifies channel */ + struct vpif_params vpifparams; + struct common_obj common[VPIF_NUMOBJECTS]; + struct video_obj video; +}; + +/* File handle structure */ +struct vpif_fh { + struct channel_obj *channel; /* pointer to channel object for + * opened device */ + u8 io_allowed[VPIF_NUMOBJECTS]; /* Indicates whether this file handle + * is doing IO */ + enum v4l2_priority prio; /* Used to keep track priority of + * this instance */ + u8 initialized; /* Used to keep track of whether this + * file handle has initialized + * channel or not */ +}; + +/* vpif device structure */ +struct vpif_device { + struct v4l2_device v4l2_dev; + struct channel_obj *dev[VPIF_DISPLAY_NUM_CHANNELS]; + struct v4l2_subdev **sd; + +}; + +struct vpif_config_params { + u32 min_bufsize[VPIF_DISPLAY_NUM_CHANNELS]; + u32 channel_bufsize[VPIF_DISPLAY_NUM_CHANNELS]; + u8 numbuffers[VPIF_DISPLAY_NUM_CHANNELS]; + u32 video_limit[VPIF_DISPLAY_NUM_CHANNELS]; + u8 min_numbuffers; +}; + +#endif /* DAVINCIHD_DISPLAY_H */ diff --git a/drivers/media/platform/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c new file mode 100644 index 00000000..8a2f01e3 --- /dev/null +++ b/drivers/media/platform/davinci/vpss.c @@ -0,0 +1,569 @@ +/* + * Copyright (C) 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * common vpss system module platform driver for all video drivers. + */ +#include +#include +#include +#include + +#include + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VPSS Driver"); +MODULE_AUTHOR("Texas Instruments"); + +/* DM644x defines */ +#define DM644X_SBL_PCR_VPSS (4) + +#define DM355_VPSSBL_INTSEL 0x10 +#define DM355_VPSSBL_EVTSEL 0x14 +/* vpss BL register offsets */ +#define DM355_VPSSBL_CCDCMUX 0x1c +/* vpss CLK register offsets */ +#define DM355_VPSSCLK_CLKCTRL 0x04 +/* masks and shifts */ +#define VPSS_HSSISEL_SHIFT 4 +/* + * VDINT0 - vpss_int0, VDINT1 - vpss_int1, H3A - vpss_int4, + * IPIPE_INT1_SDR - vpss_int5 + */ +#define DM355_VPSSBL_INTSEL_DEFAULT 0xff83ff10 +/* VENCINT - vpss_int8 */ +#define DM355_VPSSBL_EVTSEL_DEFAULT 0x4 + +#define DM365_ISP5_PCCR 0x04 +#define DM365_ISP5_PCCR_BL_CLK_ENABLE BIT(0) +#define DM365_ISP5_PCCR_ISIF_CLK_ENABLE BIT(1) +#define DM365_ISP5_PCCR_H3A_CLK_ENABLE BIT(2) +#define DM365_ISP5_PCCR_RSZ_CLK_ENABLE BIT(3) +#define DM365_ISP5_PCCR_IPIPE_CLK_ENABLE BIT(4) +#define DM365_ISP5_PCCR_IPIPEIF_CLK_ENABLE BIT(5) +#define DM365_ISP5_PCCR_RSV BIT(6) + +#define DM365_ISP5_BCR 0x08 +#define DM365_ISP5_BCR_ISIF_OUT_ENABLE BIT(1) + +#define DM365_ISP5_INTSEL1 0x10 +#define DM365_ISP5_INTSEL2 0x14 +#define DM365_ISP5_INTSEL3 0x18 +#define DM365_ISP5_CCDCMUX 0x20 +#define DM365_ISP5_PG_FRAME_SIZE 0x28 +#define DM365_VPBE_CLK_CTRL 0x00 + +#define VPSS_CLK_CTRL 0x01c40044 +#define VPSS_CLK_CTRL_VENCCLKEN BIT(3) +#define VPSS_CLK_CTRL_DACCLKEN BIT(4) + +/* + * vpss interrupts. VDINT0 - vpss_int0, VDINT1 - vpss_int1, + * AF - vpss_int3 + */ +#define DM365_ISP5_INTSEL1_DEFAULT 0x0b1f0100 +/* AEW - vpss_int6, RSZ_INT_DMA - vpss_int5 */ +#define DM365_ISP5_INTSEL2_DEFAULT 0x1f0a0f1f +/* VENC - vpss_int8 */ +#define DM365_ISP5_INTSEL3_DEFAULT 0x00000015 + +/* masks and shifts for DM365*/ +#define DM365_CCDC_PG_VD_POL_SHIFT 0 +#define DM365_CCDC_PG_HD_POL_SHIFT 1 + +#define CCD_SRC_SEL_MASK (BIT_MASK(5) | BIT_MASK(4)) +#define CCD_SRC_SEL_SHIFT 4 + +/* Different SoC platforms supported by this driver */ +enum vpss_platform_type { + DM644X, + DM355, + DM365, +}; + +/* + * vpss operations. Depends on platform. Not all functions are available + * on all platforms. The api, first check if a function is available before + * invoking it. In the probe, the function ptrs are initialized based on + * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc. + */ +struct vpss_hw_ops { + /* enable clock */ + int (*enable_clock)(enum vpss_clock_sel clock_sel, int en); + /* select input to ccdc */ + void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel); + /* clear wbl overflow bit */ + int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel); + /* set sync polarity */ + void (*set_sync_pol)(struct vpss_sync_pol); + /* set the PG_FRAME_SIZE register*/ + void (*set_pg_frame_size)(struct vpss_pg_frame_size); + /* check and clear interrupt if occurred */ + int (*dma_complete_interrupt)(void); +}; + +/* vpss configuration */ +struct vpss_oper_config { + __iomem void *vpss_regs_base0; + __iomem void *vpss_regs_base1; + resource_size_t *vpss_regs_base2; + enum vpss_platform_type platform; + spinlock_t vpss_lock; + struct vpss_hw_ops hw_ops; +}; + +static struct vpss_oper_config oper_cfg; + +/* register access routines */ +static inline u32 bl_regr(u32 offset) +{ + return __raw_readl(oper_cfg.vpss_regs_base0 + offset); +} + +static inline void bl_regw(u32 val, u32 offset) +{ + __raw_writel(val, oper_cfg.vpss_regs_base0 + offset); +} + +static inline u32 vpss_regr(u32 offset) +{ + return __raw_readl(oper_cfg.vpss_regs_base1 + offset); +} + +static inline void vpss_regw(u32 val, u32 offset) +{ + __raw_writel(val, oper_cfg.vpss_regs_base1 + offset); +} + +/* For DM365 only */ +static inline u32 isp5_read(u32 offset) +{ + return __raw_readl(oper_cfg.vpss_regs_base0 + offset); +} + +/* For DM365 only */ +static inline void isp5_write(u32 val, u32 offset) +{ + __raw_writel(val, oper_cfg.vpss_regs_base0 + offset); +} + +static void dm365_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) +{ + u32 temp = isp5_read(DM365_ISP5_CCDCMUX) & ~CCD_SRC_SEL_MASK; + + /* if we are using pattern generator, enable it */ + if (src_sel == VPSS_PGLPBK || src_sel == VPSS_CCDCPG) + temp |= 0x08; + + temp |= (src_sel << CCD_SRC_SEL_SHIFT); + isp5_write(temp, DM365_ISP5_CCDCMUX); +} + +static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) +{ + bl_regw(src_sel << VPSS_HSSISEL_SHIFT, DM355_VPSSBL_CCDCMUX); +} + +int vpss_dma_complete_interrupt(void) +{ + if (!oper_cfg.hw_ops.dma_complete_interrupt) + return 2; + return oper_cfg.hw_ops.dma_complete_interrupt(); +} +EXPORT_SYMBOL(vpss_dma_complete_interrupt); + +int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) +{ + if (!oper_cfg.hw_ops.select_ccdc_source) + return -EINVAL; + + oper_cfg.hw_ops.select_ccdc_source(src_sel); + return 0; +} +EXPORT_SYMBOL(vpss_select_ccdc_source); + +static int dm644x_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel) +{ + u32 mask = 1, val; + + if (wbl_sel < VPSS_PCR_AEW_WBL_0 || + wbl_sel > VPSS_PCR_CCDC_WBL_O) + return -EINVAL; + + /* writing a 0 clear the overflow */ + mask = ~(mask << wbl_sel); + val = bl_regr(DM644X_SBL_PCR_VPSS) & mask; + bl_regw(val, DM644X_SBL_PCR_VPSS); + return 0; +} + +void vpss_set_sync_pol(struct vpss_sync_pol sync) +{ + if (!oper_cfg.hw_ops.set_sync_pol) + return; + + oper_cfg.hw_ops.set_sync_pol(sync); +} +EXPORT_SYMBOL(vpss_set_sync_pol); + +int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel) +{ + if (!oper_cfg.hw_ops.clear_wbl_overflow) + return -EINVAL; + + return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel); +} +EXPORT_SYMBOL(vpss_clear_wbl_overflow); + +/* + * dm355_enable_clock - Enable VPSS Clock + * @clock_sel: Clock to be enabled/disabled + * @en: enable/disable flag + * + * This is called to enable or disable a vpss clock + */ +static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en) +{ + unsigned long flags; + u32 utemp, mask = 0x1, shift = 0; + + switch (clock_sel) { + case VPSS_VPBE_CLOCK: + /* nothing since lsb */ + break; + case VPSS_VENC_CLOCK_SEL: + shift = 2; + break; + case VPSS_CFALD_CLOCK: + shift = 3; + break; + case VPSS_H3A_CLOCK: + shift = 4; + break; + case VPSS_IPIPE_CLOCK: + shift = 5; + break; + case VPSS_CCDC_CLOCK: + shift = 6; + break; + default: + printk(KERN_ERR "dm355_enable_clock:" + " Invalid selector: %d\n", clock_sel); + return -EINVAL; + } + + spin_lock_irqsave(&oper_cfg.vpss_lock, flags); + utemp = vpss_regr(DM355_VPSSCLK_CLKCTRL); + if (!en) + utemp &= ~(mask << shift); + else + utemp |= (mask << shift); + + vpss_regw(utemp, DM355_VPSSCLK_CLKCTRL); + spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags); + return 0; +} + +static int dm365_enable_clock(enum vpss_clock_sel clock_sel, int en) +{ + unsigned long flags; + u32 utemp, mask = 0x1, shift = 0, offset = DM365_ISP5_PCCR; + u32 (*read)(u32 offset) = isp5_read; + void(*write)(u32 val, u32 offset) = isp5_write; + + switch (clock_sel) { + case VPSS_BL_CLOCK: + break; + case VPSS_CCDC_CLOCK: + shift = 1; + break; + case VPSS_H3A_CLOCK: + shift = 2; + break; + case VPSS_RSZ_CLOCK: + shift = 3; + break; + case VPSS_IPIPE_CLOCK: + shift = 4; + break; + case VPSS_IPIPEIF_CLOCK: + shift = 5; + break; + case VPSS_PCLK_INTERNAL: + shift = 6; + break; + case VPSS_PSYNC_CLOCK_SEL: + shift = 7; + break; + case VPSS_VPBE_CLOCK: + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_VENC_CLOCK_SEL: + shift = 2; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_LDC_CLOCK: + shift = 3; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_FDIF_CLOCK: + shift = 4; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_OSD_CLOCK_SEL: + shift = 6; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_LDC_CLOCK_SEL: + shift = 7; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + default: + printk(KERN_ERR "dm365_enable_clock: Invalid selector: %d\n", + clock_sel); + return -1; + } + + spin_lock_irqsave(&oper_cfg.vpss_lock, flags); + utemp = read(offset); + if (!en) { + mask = ~mask; + utemp &= (mask << shift); + } else + utemp |= (mask << shift); + + write(utemp, offset); + spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags); + + return 0; +} + +int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en) +{ + if (!oper_cfg.hw_ops.enable_clock) + return -EINVAL; + + return oper_cfg.hw_ops.enable_clock(clock_sel, en); +} +EXPORT_SYMBOL(vpss_enable_clock); + +void dm365_vpss_set_sync_pol(struct vpss_sync_pol sync) +{ + int val = 0; + val = isp5_read(DM365_ISP5_CCDCMUX); + + val |= (sync.ccdpg_hdpol << DM365_CCDC_PG_HD_POL_SHIFT); + val |= (sync.ccdpg_vdpol << DM365_CCDC_PG_VD_POL_SHIFT); + + isp5_write(val, DM365_ISP5_CCDCMUX); +} +EXPORT_SYMBOL(dm365_vpss_set_sync_pol); + +void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size) +{ + if (!oper_cfg.hw_ops.set_pg_frame_size) + return; + + oper_cfg.hw_ops.set_pg_frame_size(frame_size); +} +EXPORT_SYMBOL(vpss_set_pg_frame_size); + +void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size) +{ + int current_reg = ((frame_size.hlpfr >> 1) - 1) << 16; + + current_reg |= (frame_size.pplen - 1); + isp5_write(current_reg, DM365_ISP5_PG_FRAME_SIZE); +} +EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size); + +static int vpss_probe(struct platform_device *pdev) +{ + struct resource *r1, *r2; + char *platform_name; + int status; + + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENOENT; + } + + platform_name = pdev->dev.platform_data; + if (!strcmp(platform_name, "dm355_vpss")) + oper_cfg.platform = DM355; + else if (!strcmp(platform_name, "dm365_vpss")) + oper_cfg.platform = DM365; + else if (!strcmp(platform_name, "dm644x_vpss")) + oper_cfg.platform = DM644X; + else { + dev_err(&pdev->dev, "vpss driver not supported on" + " this platform\n"); + return -ENODEV; + } + + dev_info(&pdev->dev, "%s vpss probed\n", platform_name); + r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r1) + return -ENOENT; + + r1 = request_mem_region(r1->start, resource_size(r1), r1->name); + if (!r1) + return -EBUSY; + + oper_cfg.vpss_regs_base0 = ioremap(r1->start, resource_size(r1)); + if (!oper_cfg.vpss_regs_base0) { + status = -EBUSY; + goto fail1; + } + + if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) { + r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!r2) { + status = -ENOENT; + goto fail2; + } + r2 = request_mem_region(r2->start, resource_size(r2), r2->name); + if (!r2) { + status = -EBUSY; + goto fail2; + } + + oper_cfg.vpss_regs_base1 = ioremap(r2->start, + resource_size(r2)); + if (!oper_cfg.vpss_regs_base1) { + status = -EBUSY; + goto fail3; + } + } + + if (oper_cfg.platform == DM355) { + oper_cfg.hw_ops.enable_clock = dm355_enable_clock; + oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source; + /* Setup vpss interrupts */ + bl_regw(DM355_VPSSBL_INTSEL_DEFAULT, DM355_VPSSBL_INTSEL); + bl_regw(DM355_VPSSBL_EVTSEL_DEFAULT, DM355_VPSSBL_EVTSEL); + } else if (oper_cfg.platform == DM365) { + oper_cfg.hw_ops.enable_clock = dm365_enable_clock; + oper_cfg.hw_ops.select_ccdc_source = dm365_select_ccdc_source; + /* Setup vpss interrupts */ + isp5_write((isp5_read(DM365_ISP5_PCCR) | + DM365_ISP5_PCCR_BL_CLK_ENABLE | + DM365_ISP5_PCCR_ISIF_CLK_ENABLE | + DM365_ISP5_PCCR_H3A_CLK_ENABLE | + DM365_ISP5_PCCR_RSZ_CLK_ENABLE | + DM365_ISP5_PCCR_IPIPE_CLK_ENABLE | + DM365_ISP5_PCCR_IPIPEIF_CLK_ENABLE | + DM365_ISP5_PCCR_RSV), DM365_ISP5_PCCR); + isp5_write((isp5_read(DM365_ISP5_BCR) | + DM365_ISP5_BCR_ISIF_OUT_ENABLE), DM365_ISP5_BCR); + isp5_write(DM365_ISP5_INTSEL1_DEFAULT, DM365_ISP5_INTSEL1); + isp5_write(DM365_ISP5_INTSEL2_DEFAULT, DM365_ISP5_INTSEL2); + isp5_write(DM365_ISP5_INTSEL3_DEFAULT, DM365_ISP5_INTSEL3); + } else + oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow; + + pm_runtime_enable(&pdev->dev); + + pm_runtime_get(&pdev->dev); + + spin_lock_init(&oper_cfg.vpss_lock); + dev_info(&pdev->dev, "%s vpss probe success\n", platform_name); + return 0; + +fail3: + release_mem_region(r2->start, resource_size(r2)); +fail2: + iounmap(oper_cfg.vpss_regs_base0); +fail1: + release_mem_region(r1->start, resource_size(r1)); + return status; +} + +static int vpss_remove(struct platform_device *pdev) +{ + struct resource *res; + + pm_runtime_disable(&pdev->dev); + iounmap(oper_cfg.vpss_regs_base0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) { + iounmap(oper_cfg.vpss_regs_base1); + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + release_mem_region(res->start, resource_size(res)); + } + return 0; +} + +static int vpss_suspend(struct device *dev) +{ + pm_runtime_put(dev); + return 0; +} + +static int vpss_resume(struct device *dev) +{ + pm_runtime_get(dev); + return 0; +} + +static const struct dev_pm_ops vpss_pm_ops = { + .suspend = vpss_suspend, + .resume = vpss_resume, +}; + +static struct platform_driver vpss_driver = { + .driver = { + .name = "vpss", + .owner = THIS_MODULE, + .pm = &vpss_pm_ops, + }, + .remove = vpss_remove, + .probe = vpss_probe, +}; + +static void vpss_exit(void) +{ + iounmap(oper_cfg.vpss_regs_base2); + release_mem_region(VPSS_CLK_CTRL, 4); + platform_driver_unregister(&vpss_driver); +} + +static int __init vpss_init(void) +{ + if (!request_mem_region(VPSS_CLK_CTRL, 4, "vpss_clock_control")) + return -EBUSY; + + oper_cfg.vpss_regs_base2 = ioremap(VPSS_CLK_CTRL, 4); + writel(VPSS_CLK_CTRL_VENCCLKEN | + VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2); + + return platform_driver_register(&vpss_driver); +} +subsys_initcall(vpss_init); +module_exit(vpss_exit); diff --git a/drivers/media/platform/exynos-gsc/Makefile b/drivers/media/platform/exynos-gsc/Makefile new file mode 100644 index 00000000..6d1411c6 --- /dev/null +++ b/drivers/media/platform/exynos-gsc/Makefile @@ -0,0 +1,3 @@ +exynos-gsc-objs := gsc-core.o gsc-m2m.o gsc-regs.o + +obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc.o diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c new file mode 100644 index 00000000..f45b940d --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -0,0 +1,1263 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung EXYNOS5 SoC series G-Scaler driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "gsc-core.h" + +#define GSC_CLOCK_GATE_NAME "gscl" + +static const struct gsc_fmt gsc_formats[] = { + { + .name = "RGB565", + .pixelformat = V4L2_PIX_FMT_RGB565X, + .depth = { 16 }, + .color = GSC_RGB, + .num_planes = 1, + .num_comp = 1, + }, { + .name = "XRGB-8-8-8-8, 32 bpp", + .pixelformat = V4L2_PIX_FMT_RGB32, + .depth = { 32 }, + .color = GSC_RGB, + .num_planes = 1, + .num_comp = 1, + }, { + .name = "YUV 4:2:2 packed, YCbYCr", + .pixelformat = V4L2_PIX_FMT_YUYV, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 1, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + }, { + .name = "YUV 4:2:2 packed, CbYCrY", + .pixelformat = V4L2_PIX_FMT_UYVY, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_C, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 1, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + }, { + .name = "YUV 4:2:2 packed, CrYCbY", + .pixelformat = V4L2_PIX_FMT_VYUY, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_C, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 1, + .mbus_code = V4L2_MBUS_FMT_VYUY8_2X8, + }, { + .name = "YUV 4:2:2 packed, YCrYCb", + .pixelformat = V4L2_PIX_FMT_YVYU, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 1, + .mbus_code = V4L2_MBUS_FMT_YVYU8_2X8, + }, { + .name = "YUV 4:4:4 planar, YCbYCr", + .pixelformat = V4L2_PIX_FMT_YUV32, + .depth = { 32 }, + .color = GSC_YUV444, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 1, + }, { + .name = "YUV 4:2:2 planar, Y/Cb/Cr", + .pixelformat = V4L2_PIX_FMT_YUV422P, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 3, + }, { + .name = "YUV 4:2:2 planar, Y/CbCr", + .pixelformat = V4L2_PIX_FMT_NV16, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 2, + }, { + .name = "YUV 4:2:2 planar, Y/CrCb", + .pixelformat = V4L2_PIX_FMT_NV61, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 2, + }, { + .name = "YUV 4:2:0 planar, YCbCr", + .pixelformat = V4L2_PIX_FMT_YUV420, + .depth = { 12 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 3, + }, { + .name = "YUV 4:2:0 planar, YCrCb", + .pixelformat = V4L2_PIX_FMT_YVU420, + .depth = { 12 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 3, + + }, { + .name = "YUV 4:2:0 planar, Y/CbCr", + .pixelformat = V4L2_PIX_FMT_NV12, + .depth = { 12 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 2, + }, { + .name = "YUV 4:2:0 planar, Y/CrCb", + .pixelformat = V4L2_PIX_FMT_NV21, + .depth = { 12 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 2, + }, { + .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr", + .pixelformat = V4L2_PIX_FMT_NV12M, + .depth = { 8, 4 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 2, + .num_comp = 2, + }, { + .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr", + .pixelformat = V4L2_PIX_FMT_YUV420M, + .depth = { 8, 2, 2 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 3, + .num_comp = 3, + }, { + .name = "YUV 4:2:0 non-contig. 3p, Y/Cr/Cb", + .pixelformat = V4L2_PIX_FMT_YVU420M, + .depth = { 8, 2, 2 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 3, + .num_comp = 3, + }, { + .name = "YUV 4:2:0 n.c. 2p, Y/CbCr tiled", + .pixelformat = V4L2_PIX_FMT_NV12MT_16X16, + .depth = { 8, 4 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 2, + .num_comp = 2, + } +}; + +const struct gsc_fmt *get_format(int index) +{ + if (index >= ARRAY_SIZE(gsc_formats)) + return NULL; + + return (struct gsc_fmt *)&gsc_formats[index]; +} + +const struct gsc_fmt *find_fmt(u32 *pixelformat, u32 *mbus_code, u32 index) +{ + const struct gsc_fmt *fmt, *def_fmt = NULL; + unsigned int i; + + if (index >= ARRAY_SIZE(gsc_formats)) + return NULL; + + for (i = 0; i < ARRAY_SIZE(gsc_formats); ++i) { + fmt = get_format(i); + if (pixelformat && fmt->pixelformat == *pixelformat) + return fmt; + if (mbus_code && fmt->mbus_code == *mbus_code) + return fmt; + if (index == i) + def_fmt = fmt; + } + return def_fmt; + +} + +void gsc_set_frame_size(struct gsc_frame *frame, int width, int height) +{ + frame->f_width = width; + frame->f_height = height; + frame->crop.width = width; + frame->crop.height = height; + frame->crop.left = 0; + frame->crop.top = 0; +} + +int gsc_cal_prescaler_ratio(struct gsc_variant *var, u32 src, u32 dst, + u32 *ratio) +{ + if ((dst > src) || (dst >= src / var->poly_sc_down_max)) { + *ratio = 1; + return 0; + } + + if ((src / var->poly_sc_down_max / var->pre_sc_down_max) > dst) { + pr_err("Exceeded maximum downscaling ratio (1/16))"); + return -EINVAL; + } + + *ratio = (dst > (src / 8)) ? 2 : 4; + + return 0; +} + +void gsc_get_prescaler_shfactor(u32 hratio, u32 vratio, u32 *sh) +{ + if (hratio == 4 && vratio == 4) + *sh = 4; + else if ((hratio == 4 && vratio == 2) || + (hratio == 2 && vratio == 4)) + *sh = 3; + else if ((hratio == 4 && vratio == 1) || + (hratio == 1 && vratio == 4) || + (hratio == 2 && vratio == 2)) + *sh = 2; + else if (hratio == 1 && vratio == 1) + *sh = 0; + else + *sh = 1; +} + +void gsc_check_src_scale_info(struct gsc_variant *var, + struct gsc_frame *s_frame, u32 *wratio, + u32 tx, u32 ty, u32 *hratio) +{ + int remainder = 0, walign, halign; + + if (is_yuv420(s_frame->fmt->color)) { + walign = GSC_SC_ALIGN_4; + halign = GSC_SC_ALIGN_4; + } else if (is_yuv422(s_frame->fmt->color)) { + walign = GSC_SC_ALIGN_4; + halign = GSC_SC_ALIGN_2; + } else { + walign = GSC_SC_ALIGN_2; + halign = GSC_SC_ALIGN_2; + } + + remainder = s_frame->crop.width % (*wratio * walign); + if (remainder) { + s_frame->crop.width -= remainder; + gsc_cal_prescaler_ratio(var, s_frame->crop.width, tx, wratio); + pr_info("cropped src width size is recalculated from %d to %d", + s_frame->crop.width + remainder, s_frame->crop.width); + } + + remainder = s_frame->crop.height % (*hratio * halign); + if (remainder) { + s_frame->crop.height -= remainder; + gsc_cal_prescaler_ratio(var, s_frame->crop.height, ty, hratio); + pr_info("cropped src height size is recalculated from %d to %d", + s_frame->crop.height + remainder, s_frame->crop.height); + } +} + +int gsc_enum_fmt_mplane(struct v4l2_fmtdesc *f) +{ + const struct gsc_fmt *fmt; + + fmt = find_fmt(NULL, NULL, f->index); + if (!fmt) + return -EINVAL; + + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->pixelformat; + + return 0; +} + +static u32 get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index) +{ + if (frm->addr.y == addr) { + *index = 0; + return frm->addr.y; + } else if (frm->addr.cb == addr) { + *index = 1; + return frm->addr.cb; + } else if (frm->addr.cr == addr) { + *index = 2; + return frm->addr.cr; + } else { + pr_err("Plane address is wrong"); + return -EINVAL; + } +} + +void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm) +{ + u32 f_chk_addr, f_chk_len, s_chk_addr, s_chk_len; + f_chk_addr = f_chk_len = s_chk_addr = s_chk_len = 0; + + f_chk_addr = frm->addr.y; + f_chk_len = frm->payload[0]; + if (frm->fmt->num_planes == 2) { + s_chk_addr = frm->addr.cb; + s_chk_len = frm->payload[1]; + } else if (frm->fmt->num_planes == 3) { + u32 low_addr, low_plane, mid_addr, mid_plane; + u32 high_addr, high_plane; + u32 t_min, t_max; + + t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr); + low_addr = get_plane_info(frm, t_min, &low_plane); + t_max = max3(frm->addr.y, frm->addr.cb, frm->addr.cr); + high_addr = get_plane_info(frm, t_max, &high_plane); + + mid_plane = 3 - (low_plane + high_plane); + if (mid_plane == 0) + mid_addr = frm->addr.y; + else if (mid_plane == 1) + mid_addr = frm->addr.cb; + else if (mid_plane == 2) + mid_addr = frm->addr.cr; + else + return; + + f_chk_addr = low_addr; + if (mid_addr + frm->payload[mid_plane] - low_addr > + high_addr + frm->payload[high_plane] - mid_addr) { + f_chk_len = frm->payload[low_plane]; + s_chk_addr = mid_addr; + s_chk_len = high_addr + + frm->payload[high_plane] - mid_addr; + } else { + f_chk_len = mid_addr + + frm->payload[mid_plane] - low_addr; + s_chk_addr = high_addr; + s_chk_len = frm->payload[high_plane]; + } + } + pr_debug("f_addr = 0x%08x, f_len = %d, s_addr = 0x%08x, s_len = %d\n", + f_chk_addr, f_chk_len, s_chk_addr, s_chk_len); +} + +int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f) +{ + struct gsc_dev *gsc = ctx->gsc_dev; + struct gsc_variant *variant = gsc->variant; + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + const struct gsc_fmt *fmt; + u32 max_w, max_h, mod_x, mod_y; + u32 min_w, min_h, tmp_w, tmp_h; + int i; + + pr_debug("user put w: %d, h: %d", pix_mp->width, pix_mp->height); + + fmt = find_fmt(&pix_mp->pixelformat, NULL, 0); + if (!fmt) { + pr_err("pixelformat format (0x%X) invalid\n", + pix_mp->pixelformat); + return -EINVAL; + } + + if (pix_mp->field == V4L2_FIELD_ANY) + pix_mp->field = V4L2_FIELD_NONE; + else if (pix_mp->field != V4L2_FIELD_NONE) { + pr_err("Not supported field order(%d)\n", pix_mp->field); + return -EINVAL; + } + + max_w = variant->pix_max->target_rot_dis_w; + max_h = variant->pix_max->target_rot_dis_h; + + mod_x = ffs(variant->pix_align->org_w) - 1; + if (is_yuv420(fmt->color)) + mod_y = ffs(variant->pix_align->org_h) - 1; + else + mod_y = ffs(variant->pix_align->org_h) - 2; + + if (V4L2_TYPE_IS_OUTPUT(f->type)) { + min_w = variant->pix_min->org_w; + min_h = variant->pix_min->org_h; + } else { + min_w = variant->pix_min->target_rot_dis_w; + min_h = variant->pix_min->target_rot_dis_h; + } + + pr_debug("mod_x: %d, mod_y: %d, max_w: %d, max_h = %d", + mod_x, mod_y, max_w, max_h); + + /* To check if image size is modified to adjust parameter against + hardware abilities */ + tmp_w = pix_mp->width; + tmp_h = pix_mp->height; + + v4l_bound_align_image(&pix_mp->width, min_w, max_w, mod_x, + &pix_mp->height, min_h, max_h, mod_y, 0); + if (tmp_w != pix_mp->width || tmp_h != pix_mp->height) + pr_info("Image size has been modified from %dx%d to %dx%d", + tmp_w, tmp_h, pix_mp->width, pix_mp->height); + + pix_mp->num_planes = fmt->num_planes; + + if (pix_mp->width >= 1280) /* HD */ + pix_mp->colorspace = V4L2_COLORSPACE_REC709; + else /* SD */ + pix_mp->colorspace = V4L2_COLORSPACE_SMPTE170M; + + + for (i = 0; i < pix_mp->num_planes; ++i) { + int bpl = (pix_mp->width * fmt->depth[i]) >> 3; + pix_mp->plane_fmt[i].bytesperline = bpl; + pix_mp->plane_fmt[i].sizeimage = bpl * pix_mp->height; + + pr_debug("[%d]: bpl: %d, sizeimage: %d", + i, bpl, pix_mp->plane_fmt[i].sizeimage); + } + + return 0; +} + +int gsc_g_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f) +{ + struct gsc_frame *frame; + struct v4l2_pix_format_mplane *pix_mp; + int i; + + frame = ctx_get_frame(ctx, f->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + pix_mp = &f->fmt.pix_mp; + + pix_mp->width = frame->f_width; + pix_mp->height = frame->f_height; + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->pixelformat = frame->fmt->pixelformat; + pix_mp->colorspace = V4L2_COLORSPACE_REC709; + pix_mp->num_planes = frame->fmt->num_planes; + + for (i = 0; i < pix_mp->num_planes; ++i) { + pix_mp->plane_fmt[i].bytesperline = (frame->f_width * + frame->fmt->depth[i]) / 8; + pix_mp->plane_fmt[i].sizeimage = + pix_mp->plane_fmt[i].bytesperline * frame->f_height; + } + + return 0; +} + +void gsc_check_crop_change(u32 tmp_w, u32 tmp_h, u32 *w, u32 *h) +{ + if (tmp_w != *w || tmp_h != *h) { + pr_info("Cropped size has been modified from %dx%d to %dx%d", + *w, *h, tmp_w, tmp_h); + *w = tmp_w; + *h = tmp_h; + } +} + +int gsc_g_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr) +{ + struct gsc_frame *frame; + + frame = ctx_get_frame(ctx, cr->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + cr->c = frame->crop; + + return 0; +} + +int gsc_try_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr) +{ + struct gsc_frame *f; + struct gsc_dev *gsc = ctx->gsc_dev; + struct gsc_variant *variant = gsc->variant; + u32 mod_x = 0, mod_y = 0, tmp_w, tmp_h; + u32 min_w, min_h, max_w, max_h; + + if (cr->c.top < 0 || cr->c.left < 0) { + pr_err("doesn't support negative values for top & left\n"); + return -EINVAL; + } + pr_debug("user put w: %d, h: %d", cr->c.width, cr->c.height); + + if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + f = &ctx->d_frame; + else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + f = &ctx->s_frame; + else + return -EINVAL; + + max_w = f->f_width; + max_h = f->f_height; + tmp_w = cr->c.width; + tmp_h = cr->c.height; + + if (V4L2_TYPE_IS_OUTPUT(cr->type)) { + if ((is_yuv422(f->fmt->color) && f->fmt->num_comp == 1) || + is_rgb(f->fmt->color)) + min_w = 32; + else + min_w = 64; + if ((is_yuv422(f->fmt->color) && f->fmt->num_comp == 3) || + is_yuv420(f->fmt->color)) + min_h = 32; + else + min_h = 16; + } else { + if (is_yuv420(f->fmt->color) || is_yuv422(f->fmt->color)) + mod_x = ffs(variant->pix_align->target_w) - 1; + if (is_yuv420(f->fmt->color)) + mod_y = ffs(variant->pix_align->target_h) - 1; + if (ctx->gsc_ctrls.rotate->val == 90 || + ctx->gsc_ctrls.rotate->val == 270) { + max_w = f->f_height; + max_h = f->f_width; + min_w = variant->pix_min->target_rot_en_w; + min_h = variant->pix_min->target_rot_en_h; + tmp_w = cr->c.height; + tmp_h = cr->c.width; + } else { + min_w = variant->pix_min->target_rot_dis_w; + min_h = variant->pix_min->target_rot_dis_h; + } + } + pr_debug("mod_x: %d, mod_y: %d, min_w: %d, min_h = %d", + mod_x, mod_y, min_w, min_h); + pr_debug("tmp_w : %d, tmp_h : %d", tmp_w, tmp_h); + + v4l_bound_align_image(&tmp_w, min_w, max_w, mod_x, + &tmp_h, min_h, max_h, mod_y, 0); + + if (!V4L2_TYPE_IS_OUTPUT(cr->type) && + (ctx->gsc_ctrls.rotate->val == 90 || + ctx->gsc_ctrls.rotate->val == 270)) + gsc_check_crop_change(tmp_h, tmp_w, + &cr->c.width, &cr->c.height); + else + gsc_check_crop_change(tmp_w, tmp_h, + &cr->c.width, &cr->c.height); + + + /* adjust left/top if cropping rectangle is out of bounds */ + /* Need to add code to algin left value with 2's multiple */ + if (cr->c.left + tmp_w > max_w) + cr->c.left = max_w - tmp_w; + if (cr->c.top + tmp_h > max_h) + cr->c.top = max_h - tmp_h; + + if ((is_yuv420(f->fmt->color) || is_yuv422(f->fmt->color)) && + cr->c.left & 1) + cr->c.left -= 1; + + pr_debug("Aligned l:%d, t:%d, w:%d, h:%d, f_w: %d, f_h: %d", + cr->c.left, cr->c.top, cr->c.width, cr->c.height, max_w, max_h); + + return 0; +} + +int gsc_check_scaler_ratio(struct gsc_variant *var, int sw, int sh, int dw, + int dh, int rot, int out_path) +{ + int tmp_w, tmp_h, sc_down_max; + + if (out_path == GSC_DMA) + sc_down_max = var->sc_down_max; + else + sc_down_max = var->local_sc_down; + + if (rot == 90 || rot == 270) { + tmp_w = dh; + tmp_h = dw; + } else { + tmp_w = dw; + tmp_h = dh; + } + + if ((sw / tmp_w) > sc_down_max || + (sh / tmp_h) > sc_down_max || + (tmp_w / sw) > var->sc_up_max || + (tmp_h / sh) > var->sc_up_max) + return -EINVAL; + + return 0; +} + +int gsc_set_scaler_info(struct gsc_ctx *ctx) +{ + struct gsc_scaler *sc = &ctx->scaler; + struct gsc_frame *s_frame = &ctx->s_frame; + struct gsc_frame *d_frame = &ctx->d_frame; + struct gsc_variant *variant = ctx->gsc_dev->variant; + struct device *dev = &ctx->gsc_dev->pdev->dev; + int tx, ty; + int ret; + + ret = gsc_check_scaler_ratio(variant, s_frame->crop.width, + s_frame->crop.height, d_frame->crop.width, d_frame->crop.height, + ctx->gsc_ctrls.rotate->val, ctx->out_path); + if (ret) { + pr_err("out of scaler range"); + return ret; + } + + if (ctx->gsc_ctrls.rotate->val == 90 || + ctx->gsc_ctrls.rotate->val == 270) { + ty = d_frame->crop.width; + tx = d_frame->crop.height; + } else { + tx = d_frame->crop.width; + ty = d_frame->crop.height; + } + + if (tx <= 0 || ty <= 0) { + dev_err(dev, "Invalid target size: %dx%d", tx, ty); + return -EINVAL; + } + + ret = gsc_cal_prescaler_ratio(variant, s_frame->crop.width, + tx, &sc->pre_hratio); + if (ret) { + pr_err("Horizontal scale ratio is out of range"); + return ret; + } + + ret = gsc_cal_prescaler_ratio(variant, s_frame->crop.height, + ty, &sc->pre_vratio); + if (ret) { + pr_err("Vertical scale ratio is out of range"); + return ret; + } + + gsc_check_src_scale_info(variant, s_frame, &sc->pre_hratio, + tx, ty, &sc->pre_vratio); + + gsc_get_prescaler_shfactor(sc->pre_hratio, sc->pre_vratio, + &sc->pre_shfactor); + + sc->main_hratio = (s_frame->crop.width << 16) / tx; + sc->main_vratio = (s_frame->crop.height << 16) / ty; + + pr_debug("scaler input/output size : sx = %d, sy = %d, tx = %d, ty = %d", + s_frame->crop.width, s_frame->crop.height, tx, ty); + pr_debug("scaler ratio info : pre_shfactor : %d, pre_h : %d", + sc->pre_shfactor, sc->pre_hratio); + pr_debug("pre_v :%d, main_h : %d, main_v : %d", + sc->pre_vratio, sc->main_hratio, sc->main_vratio); + + return 0; +} + +static int __gsc_s_ctrl(struct gsc_ctx *ctx, struct v4l2_ctrl *ctrl) +{ + struct gsc_dev *gsc = ctx->gsc_dev; + struct gsc_variant *variant = gsc->variant; + unsigned int flags = GSC_DST_FMT | GSC_SRC_FMT; + int ret = 0; + + if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) + return 0; + + switch (ctrl->id) { + case V4L2_CID_HFLIP: + ctx->hflip = ctrl->val; + break; + + case V4L2_CID_VFLIP: + ctx->vflip = ctrl->val; + break; + + case V4L2_CID_ROTATE: + if ((ctx->state & flags) == flags) { + ret = gsc_check_scaler_ratio(variant, + ctx->s_frame.crop.width, + ctx->s_frame.crop.height, + ctx->d_frame.crop.width, + ctx->d_frame.crop.height, + ctx->gsc_ctrls.rotate->val, + ctx->out_path); + + if (ret) + return -EINVAL; + } + + ctx->rotation = ctrl->val; + break; + + case V4L2_CID_ALPHA_COMPONENT: + ctx->d_frame.alpha = ctrl->val; + break; + } + + ctx->state |= GSC_PARAMS; + return 0; +} + +static int gsc_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct gsc_ctx *ctx = ctrl_to_ctx(ctrl); + unsigned long flags; + int ret; + + spin_lock_irqsave(&ctx->gsc_dev->slock, flags); + ret = __gsc_s_ctrl(ctx, ctrl); + spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); + + return ret; +} + +static const struct v4l2_ctrl_ops gsc_ctrl_ops = { + .s_ctrl = gsc_s_ctrl, +}; + +int gsc_ctrls_create(struct gsc_ctx *ctx) +{ + if (ctx->ctrls_rdy) { + pr_err("Control handler of this context was created already"); + return 0; + } + + v4l2_ctrl_handler_init(&ctx->ctrl_handler, GSC_MAX_CTRL_NUM); + + ctx->gsc_ctrls.rotate = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &gsc_ctrl_ops, V4L2_CID_ROTATE, 0, 270, 90, 0); + ctx->gsc_ctrls.hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &gsc_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0); + ctx->gsc_ctrls.vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &gsc_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); + ctx->gsc_ctrls.global_alpha = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &gsc_ctrl_ops, V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 0); + + ctx->ctrls_rdy = ctx->ctrl_handler.error == 0; + + if (ctx->ctrl_handler.error) { + int err = ctx->ctrl_handler.error; + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + pr_err("Failed to create G-Scaler control handlers"); + return err; + } + + return 0; +} + +void gsc_ctrls_delete(struct gsc_ctx *ctx) +{ + if (ctx->ctrls_rdy) { + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + ctx->ctrls_rdy = false; + } +} + +/* The color format (num_comp, num_planes) must be already configured. */ +int gsc_prepare_addr(struct gsc_ctx *ctx, struct vb2_buffer *vb, + struct gsc_frame *frame, struct gsc_addr *addr) +{ + int ret = 0; + u32 pix_size; + + if ((vb == NULL) || (frame == NULL)) + return -EINVAL; + + pix_size = frame->f_width * frame->f_height; + + pr_debug("num_planes= %d, num_comp= %d, pix_size= %d", + frame->fmt->num_planes, frame->fmt->num_comp, pix_size); + + addr->y = vb2_dma_contig_plane_dma_addr(vb, 0); + + if (frame->fmt->num_planes == 1) { + switch (frame->fmt->num_comp) { + case 1: + addr->cb = 0; + addr->cr = 0; + break; + case 2: + /* decompose Y into Y/Cb */ + addr->cb = (dma_addr_t)(addr->y + pix_size); + addr->cr = 0; + break; + case 3: + /* decompose Y into Y/Cb/Cr */ + addr->cb = (dma_addr_t)(addr->y + pix_size); + if (GSC_YUV420 == frame->fmt->color) + addr->cr = (dma_addr_t)(addr->cb + + (pix_size >> 2)); + else /* 422 */ + addr->cr = (dma_addr_t)(addr->cb + + (pix_size >> 1)); + break; + default: + pr_err("Invalid the number of color planes"); + return -EINVAL; + } + } else { + if (frame->fmt->num_planes >= 2) + addr->cb = vb2_dma_contig_plane_dma_addr(vb, 1); + + if (frame->fmt->num_planes == 3) + addr->cr = vb2_dma_contig_plane_dma_addr(vb, 2); + } + + if ((frame->fmt->pixelformat == V4L2_PIX_FMT_VYUY) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_YVYU) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_NV61) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_NV21) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420M)) + swap(addr->cb, addr->cr); + + pr_debug("ADDR: y= 0x%X cb= 0x%X cr= 0x%X ret= %d", + addr->y, addr->cb, addr->cr, ret); + + return ret; +} + +static irqreturn_t gsc_irq_handler(int irq, void *priv) +{ + struct gsc_dev *gsc = priv; + struct gsc_ctx *ctx; + int gsc_irq; + + gsc_irq = gsc_hw_get_irq_status(gsc); + gsc_hw_clear_irq(gsc, gsc_irq); + + if (gsc_irq == GSC_IRQ_OVERRUN) { + pr_err("Local path input over-run interrupt has occurred!\n"); + return IRQ_HANDLED; + } + + spin_lock(&gsc->slock); + + if (test_and_clear_bit(ST_M2M_PEND, &gsc->state)) { + + gsc_hw_enable_control(gsc, false); + + if (test_and_clear_bit(ST_M2M_SUSPENDING, &gsc->state)) { + set_bit(ST_M2M_SUSPENDED, &gsc->state); + wake_up(&gsc->irq_queue); + goto isr_unlock; + } + ctx = v4l2_m2m_get_curr_priv(gsc->m2m.m2m_dev); + + if (!ctx || !ctx->m2m_ctx) + goto isr_unlock; + + spin_unlock(&gsc->slock); + gsc_m2m_job_finish(ctx, VB2_BUF_STATE_DONE); + + /* wake_up job_abort, stop_streaming */ + if (ctx->state & GSC_CTX_STOP_REQ) { + ctx->state &= ~GSC_CTX_STOP_REQ; + wake_up(&gsc->irq_queue); + } + return IRQ_HANDLED; + } + +isr_unlock: + spin_unlock(&gsc->slock); + return IRQ_HANDLED; +} + +static struct gsc_pix_max gsc_v_100_max = { + .org_scaler_bypass_w = 8192, + .org_scaler_bypass_h = 8192, + .org_scaler_input_w = 4800, + .org_scaler_input_h = 3344, + .real_rot_dis_w = 4800, + .real_rot_dis_h = 3344, + .real_rot_en_w = 2047, + .real_rot_en_h = 2047, + .target_rot_dis_w = 4800, + .target_rot_dis_h = 3344, + .target_rot_en_w = 2016, + .target_rot_en_h = 2016, +}; + +static struct gsc_pix_min gsc_v_100_min = { + .org_w = 64, + .org_h = 32, + .real_w = 64, + .real_h = 32, + .target_rot_dis_w = 64, + .target_rot_dis_h = 32, + .target_rot_en_w = 32, + .target_rot_en_h = 16, +}; + +static struct gsc_pix_align gsc_v_100_align = { + .org_h = 16, + .org_w = 16, /* yuv420 : 16, others : 8 */ + .offset_h = 2, /* yuv420/422 : 2, others : 1 */ + .real_w = 16, /* yuv420/422 : 4~16, others : 2~8 */ + .real_h = 16, /* yuv420 : 4~16, others : 1 */ + .target_w = 2, /* yuv420/422 : 2, others : 1 */ + .target_h = 2, /* yuv420 : 2, others : 1 */ +}; + +static struct gsc_variant gsc_v_100_variant = { + .pix_max = &gsc_v_100_max, + .pix_min = &gsc_v_100_min, + .pix_align = &gsc_v_100_align, + .in_buf_cnt = 32, + .out_buf_cnt = 32, + .sc_up_max = 8, + .sc_down_max = 16, + .poly_sc_down_max = 4, + .pre_sc_down_max = 4, + .local_sc_down = 2, +}; + +static struct gsc_driverdata gsc_v_100_drvdata = { + .variant = { + [0] = &gsc_v_100_variant, + [1] = &gsc_v_100_variant, + [2] = &gsc_v_100_variant, + [3] = &gsc_v_100_variant, + }, + .num_entities = 4, + .lclk_frequency = 266000000UL, +}; + +static struct platform_device_id gsc_driver_ids[] = { + { + .name = "exynos-gsc", + .driver_data = (unsigned long)&gsc_v_100_drvdata, + }, + {}, +}; +MODULE_DEVICE_TABLE(platform, gsc_driver_ids); + +static const struct of_device_id exynos_gsc_match[] = { + { + .compatible = "samsung,exynos5-gsc", + .data = &gsc_v_100_drvdata, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_gsc_match); + +static void *gsc_get_drv_data(struct platform_device *pdev) +{ + struct gsc_driverdata *driver_data = NULL; + + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(of_match_ptr(exynos_gsc_match), + pdev->dev.of_node); + if (match) + driver_data = (struct gsc_driverdata *)match->data; + } else { + driver_data = (struct gsc_driverdata *) + platform_get_device_id(pdev)->driver_data; + } + + return driver_data; +} + +static void gsc_clk_put(struct gsc_dev *gsc) +{ + if (!IS_ERR(gsc->clock)) + clk_unprepare(gsc->clock); +} + +static int gsc_clk_get(struct gsc_dev *gsc) +{ + int ret; + + dev_dbg(&gsc->pdev->dev, "gsc_clk_get Called\n"); + + gsc->clock = devm_clk_get(&gsc->pdev->dev, GSC_CLOCK_GATE_NAME); + if (IS_ERR(gsc->clock)) { + dev_err(&gsc->pdev->dev, "failed to get clock~~~: %s\n", + GSC_CLOCK_GATE_NAME); + return PTR_ERR(gsc->clock); + } + + ret = clk_prepare(gsc->clock); + if (ret < 0) { + dev_err(&gsc->pdev->dev, "clock prepare failed for clock: %s\n", + GSC_CLOCK_GATE_NAME); + gsc->clock = ERR_PTR(-EINVAL); + return ret; + } + + return 0; +} + +static int gsc_m2m_suspend(struct gsc_dev *gsc) +{ + unsigned long flags; + int timeout; + + spin_lock_irqsave(&gsc->slock, flags); + if (!gsc_m2m_pending(gsc)) { + spin_unlock_irqrestore(&gsc->slock, flags); + return 0; + } + clear_bit(ST_M2M_SUSPENDED, &gsc->state); + set_bit(ST_M2M_SUSPENDING, &gsc->state); + spin_unlock_irqrestore(&gsc->slock, flags); + + timeout = wait_event_timeout(gsc->irq_queue, + test_bit(ST_M2M_SUSPENDED, &gsc->state), + GSC_SHUTDOWN_TIMEOUT); + + clear_bit(ST_M2M_SUSPENDING, &gsc->state); + return timeout == 0 ? -EAGAIN : 0; +} + +static int gsc_m2m_resume(struct gsc_dev *gsc) +{ + struct gsc_ctx *ctx; + unsigned long flags; + + spin_lock_irqsave(&gsc->slock, flags); + /* Clear for full H/W setup in first run after resume */ + ctx = gsc->m2m.ctx; + gsc->m2m.ctx = NULL; + spin_unlock_irqrestore(&gsc->slock, flags); + + if (test_and_clear_bit(ST_M2M_SUSPENDED, &gsc->state)) + gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); + + return 0; +} + +static int gsc_probe(struct platform_device *pdev) +{ + struct gsc_dev *gsc; + struct resource *res; + struct gsc_driverdata *drv_data = gsc_get_drv_data(pdev); + struct device *dev = &pdev->dev; + int ret = 0; + + gsc = devm_kzalloc(dev, sizeof(struct gsc_dev), GFP_KERNEL); + if (!gsc) + return -ENOMEM; + + if (dev->of_node) + gsc->id = of_alias_get_id(pdev->dev.of_node, "gsc"); + else + gsc->id = pdev->id; + + if (gsc->id < 0 || gsc->id >= drv_data->num_entities) { + dev_err(dev, "Invalid platform device id: %d\n", gsc->id); + return -EINVAL; + } + + gsc->variant = drv_data->variant[gsc->id]; + gsc->pdev = pdev; + gsc->pdata = dev->platform_data; + + init_waitqueue_head(&gsc->irq_queue); + spin_lock_init(&gsc->slock); + mutex_init(&gsc->lock); + gsc->clock = ERR_PTR(-EINVAL); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gsc->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(gsc->regs)) + return PTR_ERR(gsc->regs); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "failed to get IRQ resource\n"); + return -ENXIO; + } + + ret = gsc_clk_get(gsc); + if (ret) + return ret; + + ret = devm_request_irq(dev, res->start, gsc_irq_handler, + 0, pdev->name, gsc); + if (ret) { + dev_err(dev, "failed to install irq (%d)\n", ret); + goto err_clk; + } + + ret = v4l2_device_register(dev, &gsc->v4l2_dev); + if (ret) + goto err_clk; + + ret = gsc_register_m2m_device(gsc); + if (ret) + goto err_v4l2; + + platform_set_drvdata(pdev, gsc); + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) + goto err_m2m; + + /* Initialize continious memory allocator */ + gsc->alloc_ctx = vb2_dma_contig_init_ctx(dev); + if (IS_ERR(gsc->alloc_ctx)) { + ret = PTR_ERR(gsc->alloc_ctx); + goto err_pm; + } + + dev_dbg(dev, "gsc-%d registered successfully\n", gsc->id); + + pm_runtime_put(dev); + return 0; +err_pm: + pm_runtime_put(dev); +err_m2m: + gsc_unregister_m2m_device(gsc); +err_v4l2: + v4l2_device_unregister(&gsc->v4l2_dev); +err_clk: + gsc_clk_put(gsc); + return ret; +} + +static int gsc_remove(struct platform_device *pdev) +{ + struct gsc_dev *gsc = platform_get_drvdata(pdev); + + gsc_unregister_m2m_device(gsc); + v4l2_device_unregister(&gsc->v4l2_dev); + + vb2_dma_contig_cleanup_ctx(gsc->alloc_ctx); + pm_runtime_disable(&pdev->dev); + gsc_clk_put(gsc); + + dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name); + return 0; +} + +static int gsc_runtime_resume(struct device *dev) +{ + struct gsc_dev *gsc = dev_get_drvdata(dev); + int ret = 0; + + pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + + ret = clk_enable(gsc->clock); + if (ret) + return ret; + + gsc_hw_set_sw_reset(gsc); + gsc_wait_reset(gsc); + + return gsc_m2m_resume(gsc); +} + +static int gsc_runtime_suspend(struct device *dev) +{ + struct gsc_dev *gsc = dev_get_drvdata(dev); + int ret = 0; + + ret = gsc_m2m_suspend(gsc); + if (!ret) + clk_disable(gsc->clock); + + pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + return ret; +} + +static int gsc_resume(struct device *dev) +{ + struct gsc_dev *gsc = dev_get_drvdata(dev); + unsigned long flags; + + pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + + /* Do not resume if the device was idle before system suspend */ + spin_lock_irqsave(&gsc->slock, flags); + if (!test_and_clear_bit(ST_SUSPEND, &gsc->state) || + !gsc_m2m_opened(gsc)) { + spin_unlock_irqrestore(&gsc->slock, flags); + return 0; + } + gsc_hw_set_sw_reset(gsc); + gsc_wait_reset(gsc); + + spin_unlock_irqrestore(&gsc->slock, flags); + + return gsc_m2m_resume(gsc); +} + +static int gsc_suspend(struct device *dev) +{ + struct gsc_dev *gsc = dev_get_drvdata(dev); + + pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + + if (test_and_set_bit(ST_SUSPEND, &gsc->state)) + return 0; + + return gsc_m2m_suspend(gsc); +} + +static const struct dev_pm_ops gsc_pm_ops = { + .suspend = gsc_suspend, + .resume = gsc_resume, + .runtime_suspend = gsc_runtime_suspend, + .runtime_resume = gsc_runtime_resume, +}; + +static struct platform_driver gsc_driver = { + .probe = gsc_probe, + .remove = gsc_remove, + .id_table = gsc_driver_ids, + .driver = { + .name = GSC_MODULE_NAME, + .owner = THIS_MODULE, + .pm = &gsc_pm_ops, + .of_match_table = exynos_gsc_match, + } +}; + +module_platform_driver(gsc_driver); + +MODULE_AUTHOR("Hyunwong Kim "); +MODULE_DESCRIPTION("Samsung EXYNOS5 Soc series G-Scaler driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/exynos-gsc/gsc-core.h b/drivers/media/platform/exynos-gsc/gsc-core.h new file mode 100644 index 00000000..76435d3b --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-core.h @@ -0,0 +1,533 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * header file for Samsung EXYNOS5 SoC series G-Scaler driver + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef GSC_CORE_H_ +#define GSC_CORE_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "gsc-regs.h" + +#define CONFIG_VB2_GSC_DMA_CONTIG 1 +#define GSC_MODULE_NAME "exynos-gsc" + +#define GSC_SHUTDOWN_TIMEOUT ((100*HZ)/1000) +#define GSC_MAX_DEVS 4 +#define GSC_M2M_BUF_NUM 0 +#define GSC_MAX_CTRL_NUM 10 +#define GSC_SC_ALIGN_4 4 +#define GSC_SC_ALIGN_2 2 +#define DEFAULT_CSC_EQ 1 +#define DEFAULT_CSC_RANGE 1 + +#define GSC_PARAMS (1 << 0) +#define GSC_SRC_FMT (1 << 1) +#define GSC_DST_FMT (1 << 2) +#define GSC_CTX_M2M (1 << 3) +#define GSC_CTX_STOP_REQ (1 << 6) + +enum gsc_dev_flags { + /* for global */ + ST_SUSPEND, + + /* for m2m node */ + ST_M2M_OPEN, + ST_M2M_RUN, + ST_M2M_PEND, + ST_M2M_SUSPENDED, + ST_M2M_SUSPENDING, +}; + +enum gsc_irq { + GSC_IRQ_DONE, + GSC_IRQ_OVERRUN +}; + +/** + * enum gsc_datapath - the path of data used for G-Scaler + * @GSC_CAMERA: from camera + * @GSC_DMA: from/to DMA + * @GSC_LOCAL: to local path + * @GSC_WRITEBACK: from FIMD + */ +enum gsc_datapath { + GSC_CAMERA = 0x1, + GSC_DMA, + GSC_MIXER, + GSC_FIMD, + GSC_WRITEBACK, +}; + +enum gsc_color_fmt { + GSC_RGB = 0x1, + GSC_YUV420 = 0x2, + GSC_YUV422 = 0x4, + GSC_YUV444 = 0x8, +}; + +enum gsc_yuv_fmt { + GSC_LSB_Y = 0x10, + GSC_LSB_C, + GSC_CBCR = 0x20, + GSC_CRCB, +}; + +#define fh_to_ctx(__fh) container_of(__fh, struct gsc_ctx, fh) +#define is_rgb(x) (!!((x) & 0x1)) +#define is_yuv420(x) (!!((x) & 0x2)) +#define is_yuv422(x) (!!((x) & 0x4)) + +#define gsc_m2m_active(dev) test_bit(ST_M2M_RUN, &(dev)->state) +#define gsc_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state) +#define gsc_m2m_opened(dev) test_bit(ST_M2M_OPEN, &(dev)->state) + +#define ctrl_to_ctx(__ctrl) \ + container_of((__ctrl)->handler, struct gsc_ctx, ctrl_handler) +/** + * struct gsc_fmt - the driver's internal color format data + * @mbus_code: Media Bus pixel code, -1 if not applicable + * @name: format description + * @pixelformat: the fourcc code for this format, 0 if not applicable + * @yorder: Y/C order + * @corder: Chrominance order control + * @num_planes: number of physically non-contiguous data planes + * @nr_comp: number of physically contiguous data planes + * @depth: per plane driver's private 'number of bits per pixel' + * @flags: flags indicating which operation mode format applies to + */ +struct gsc_fmt { + enum v4l2_mbus_pixelcode mbus_code; + char *name; + u32 pixelformat; + u32 color; + u32 yorder; + u32 corder; + u16 num_planes; + u16 num_comp; + u8 depth[VIDEO_MAX_PLANES]; + u32 flags; +}; + +/** + * struct gsc_input_buf - the driver's video buffer + * @vb: videobuf2 buffer + * @list : linked list structure for buffer queue + * @idx : index of G-Scaler input buffer + */ +struct gsc_input_buf { + struct vb2_buffer vb; + struct list_head list; + int idx; +}; + +/** + * struct gsc_addr - the G-Scaler physical address set + * @y: luminance plane address + * @cb: Cb plane address + * @cr: Cr plane address + */ +struct gsc_addr { + dma_addr_t y; + dma_addr_t cb; + dma_addr_t cr; +}; + +/* struct gsc_ctrls - the G-Scaler control set + * @rotate: rotation degree + * @hflip: horizontal flip + * @vflip: vertical flip + * @global_alpha: the alpha value of current frame + */ +struct gsc_ctrls { + struct v4l2_ctrl *rotate; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *global_alpha; +}; + +/** + * struct gsc_scaler - the configuration data for G-Scaler inetrnal scaler + * @pre_shfactor: pre sclaer shift factor + * @pre_hratio: horizontal ratio of the prescaler + * @pre_vratio: vertical ratio of the prescaler + * @main_hratio: the main scaler's horizontal ratio + * @main_vratio: the main scaler's vertical ratio + */ +struct gsc_scaler { + u32 pre_shfactor; + u32 pre_hratio; + u32 pre_vratio; + u32 main_hratio; + u32 main_vratio; +}; + +struct gsc_dev; + +struct gsc_ctx; + +/** + * struct gsc_frame - source/target frame properties + * @f_width: SRC : SRCIMG_WIDTH, DST : OUTPUTDMA_WHOLE_IMG_WIDTH + * @f_height: SRC : SRCIMG_HEIGHT, DST : OUTPUTDMA_WHOLE_IMG_HEIGHT + * @crop: cropped(source)/scaled(destination) size + * @payload: image size in bytes (w x h x bpp) + * @addr: image frame buffer physical addresses + * @fmt: G-Scaler color format pointer + * @colorspace: value indicating v4l2_colorspace + * @alpha: frame's alpha value + */ +struct gsc_frame { + u32 f_width; + u32 f_height; + struct v4l2_rect crop; + unsigned long payload[VIDEO_MAX_PLANES]; + struct gsc_addr addr; + const struct gsc_fmt *fmt; + u32 colorspace; + u8 alpha; +}; + +/** + * struct gsc_m2m_device - v4l2 memory-to-memory device data + * @vfd: the video device node for v4l2 m2m mode + * @m2m_dev: v4l2 memory-to-memory device data + * @ctx: hardware context data + * @refcnt: the reference counter + */ +struct gsc_m2m_device { + struct video_device *vfd; + struct v4l2_m2m_dev *m2m_dev; + struct gsc_ctx *ctx; + int refcnt; +}; + +/** + * struct gsc_pix_max - image pixel size limits in various IP configurations + * + * @org_scaler_bypass_w: max pixel width when the scaler is disabled + * @org_scaler_bypass_h: max pixel height when the scaler is disabled + * @org_scaler_input_w: max pixel width when the scaler is enabled + * @org_scaler_input_h: max pixel height when the scaler is enabled + * @real_rot_dis_w: max pixel src cropped height with the rotator is off + * @real_rot_dis_h: max pixel src croppped width with the rotator is off + * @real_rot_en_w: max pixel src cropped width with the rotator is on + * @real_rot_en_h: max pixel src cropped height with the rotator is on + * @target_rot_dis_w: max pixel dst scaled width with the rotator is off + * @target_rot_dis_h: max pixel dst scaled height with the rotator is off + * @target_rot_en_w: max pixel dst scaled width with the rotator is on + * @target_rot_en_h: max pixel dst scaled height with the rotator is on + */ +struct gsc_pix_max { + u16 org_scaler_bypass_w; + u16 org_scaler_bypass_h; + u16 org_scaler_input_w; + u16 org_scaler_input_h; + u16 real_rot_dis_w; + u16 real_rot_dis_h; + u16 real_rot_en_w; + u16 real_rot_en_h; + u16 target_rot_dis_w; + u16 target_rot_dis_h; + u16 target_rot_en_w; + u16 target_rot_en_h; +}; + +/** + * struct gsc_pix_min - image pixel size limits in various IP configurations + * + * @org_w: minimum source pixel width + * @org_h: minimum source pixel height + * @real_w: minimum input crop pixel width + * @real_h: minimum input crop pixel height + * @target_rot_dis_w: minimum output scaled pixel height when rotator is off + * @target_rot_dis_h: minimum output scaled pixel height when rotator is off + * @target_rot_en_w: minimum output scaled pixel height when rotator is on + * @target_rot_en_h: minimum output scaled pixel height when rotator is on + */ +struct gsc_pix_min { + u16 org_w; + u16 org_h; + u16 real_w; + u16 real_h; + u16 target_rot_dis_w; + u16 target_rot_dis_h; + u16 target_rot_en_w; + u16 target_rot_en_h; +}; + +struct gsc_pix_align { + u16 org_h; + u16 org_w; + u16 offset_h; + u16 real_w; + u16 real_h; + u16 target_w; + u16 target_h; +}; + +/** + * struct gsc_variant - G-Scaler variant information + */ +struct gsc_variant { + struct gsc_pix_max *pix_max; + struct gsc_pix_min *pix_min; + struct gsc_pix_align *pix_align; + u16 in_buf_cnt; + u16 out_buf_cnt; + u16 sc_up_max; + u16 sc_down_max; + u16 poly_sc_down_max; + u16 pre_sc_down_max; + u16 local_sc_down; +}; + +/** + * struct gsc_driverdata - per device type driver data for init time. + * + * @variant: the variant information for this driver. + * @lclk_frequency: G-Scaler clock frequency + * @num_entities: the number of g-scalers + */ +struct gsc_driverdata { + struct gsc_variant *variant[GSC_MAX_DEVS]; + unsigned long lclk_frequency; + int num_entities; +}; + +/** + * struct gsc_dev - abstraction for G-Scaler entity + * @slock: the spinlock protecting this data structure + * @lock: the mutex protecting this data structure + * @pdev: pointer to the G-Scaler platform device + * @variant: the IP variant information + * @id: G-Scaler device index (0..GSC_MAX_DEVS) + * @clock: clocks required for G-Scaler operation + * @regs: the mapped hardware registers + * @irq_queue: interrupt handler waitqueue + * @m2m: memory-to-memory V4L2 device information + * @state: flags used to synchronize m2m and capture mode operation + * @alloc_ctx: videobuf2 memory allocator context + * @vdev: video device for G-Scaler instance + */ +struct gsc_dev { + spinlock_t slock; + struct mutex lock; + struct platform_device *pdev; + struct gsc_variant *variant; + u16 id; + struct clk *clock; + void __iomem *regs; + wait_queue_head_t irq_queue; + struct gsc_m2m_device m2m; + struct exynos_platform_gscaler *pdata; + unsigned long state; + struct vb2_alloc_ctx *alloc_ctx; + struct video_device vdev; + struct v4l2_device v4l2_dev; +}; + +/** + * gsc_ctx - the device context data + * @s_frame: source frame properties + * @d_frame: destination frame properties + * @in_path: input mode (DMA or camera) + * @out_path: output mode (DMA or FIFO) + * @scaler: image scaler properties + * @flags: additional flags for image conversion + * @state: flags to keep track of user configuration + * @gsc_dev: the G-Scaler device this context applies to + * @m2m_ctx: memory-to-memory device context + * @fh: v4l2 file handle + * @ctrl_handler: v4l2 controls handler + * @gsc_ctrls G-Scaler control set + * @ctrls_rdy: true if the control handler is initialized + */ +struct gsc_ctx { + struct gsc_frame s_frame; + struct gsc_frame d_frame; + enum gsc_datapath in_path; + enum gsc_datapath out_path; + struct gsc_scaler scaler; + u32 flags; + u32 state; + int rotation; + unsigned int hflip:1; + unsigned int vflip:1; + struct gsc_dev *gsc_dev; + struct v4l2_m2m_ctx *m2m_ctx; + struct v4l2_fh fh; + struct v4l2_ctrl_handler ctrl_handler; + struct gsc_ctrls gsc_ctrls; + bool ctrls_rdy; +}; + +void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm); +int gsc_register_m2m_device(struct gsc_dev *gsc); +void gsc_unregister_m2m_device(struct gsc_dev *gsc); +void gsc_m2m_job_finish(struct gsc_ctx *ctx, int vb_state); + +u32 get_plane_size(struct gsc_frame *fr, unsigned int plane); +const struct gsc_fmt *get_format(int index); +const struct gsc_fmt *find_fmt(u32 *pixelformat, u32 *mbus_code, u32 index); +int gsc_enum_fmt_mplane(struct v4l2_fmtdesc *f); +int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f); +void gsc_set_frame_size(struct gsc_frame *frame, int width, int height); +int gsc_g_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f); +void gsc_check_crop_change(u32 tmp_w, u32 tmp_h, u32 *w, u32 *h); +int gsc_g_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr); +int gsc_try_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr); +int gsc_cal_prescaler_ratio(struct gsc_variant *var, u32 src, u32 dst, + u32 *ratio); +void gsc_get_prescaler_shfactor(u32 hratio, u32 vratio, u32 *sh); +void gsc_check_src_scale_info(struct gsc_variant *var, + struct gsc_frame *s_frame, + u32 *wratio, u32 tx, u32 ty, u32 *hratio); +int gsc_check_scaler_ratio(struct gsc_variant *var, int sw, int sh, int dw, + int dh, int rot, int out_path); +int gsc_set_scaler_info(struct gsc_ctx *ctx); +int gsc_ctrls_create(struct gsc_ctx *ctx); +void gsc_ctrls_delete(struct gsc_ctx *ctx); +int gsc_prepare_addr(struct gsc_ctx *ctx, struct vb2_buffer *vb, + struct gsc_frame *frame, struct gsc_addr *addr); + +static inline void gsc_ctx_state_lock_set(u32 state, struct gsc_ctx *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->gsc_dev->slock, flags); + ctx->state |= state; + spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); +} + +static inline void gsc_ctx_state_lock_clear(u32 state, struct gsc_ctx *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->gsc_dev->slock, flags); + ctx->state &= ~state; + spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); +} + +static inline int is_tiled(const struct gsc_fmt *fmt) +{ + return fmt->pixelformat == V4L2_PIX_FMT_NV12MT_16X16; +} + +static inline void gsc_hw_enable_control(struct gsc_dev *dev, bool on) +{ + u32 cfg = readl(dev->regs + GSC_ENABLE); + + if (on) + cfg |= GSC_ENABLE_ON; + else + cfg &= ~GSC_ENABLE_ON; + + writel(cfg, dev->regs + GSC_ENABLE); +} + +static inline int gsc_hw_get_irq_status(struct gsc_dev *dev) +{ + u32 cfg = readl(dev->regs + GSC_IRQ); + if (cfg & GSC_IRQ_STATUS_OR_IRQ) + return GSC_IRQ_OVERRUN; + else + return GSC_IRQ_DONE; + +} + +static inline void gsc_hw_clear_irq(struct gsc_dev *dev, int irq) +{ + u32 cfg = readl(dev->regs + GSC_IRQ); + if (irq == GSC_IRQ_OVERRUN) + cfg |= GSC_IRQ_STATUS_OR_IRQ; + else if (irq == GSC_IRQ_DONE) + cfg |= GSC_IRQ_STATUS_FRM_DONE_IRQ; + writel(cfg, dev->regs + GSC_IRQ); +} + +static inline void gsc_lock(struct vb2_queue *vq) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_lock(&ctx->gsc_dev->lock); +} + +static inline void gsc_unlock(struct vb2_queue *vq) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_unlock(&ctx->gsc_dev->lock); +} + +static inline bool gsc_ctx_state_is_set(u32 mask, struct gsc_ctx *ctx) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&ctx->gsc_dev->slock, flags); + ret = (ctx->state & mask) == mask; + spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); + return ret; +} + +static inline struct gsc_frame *ctx_get_frame(struct gsc_ctx *ctx, + enum v4l2_buf_type type) +{ + struct gsc_frame *frame; + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE == type) { + frame = &ctx->s_frame; + } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE == type) { + frame = &ctx->d_frame; + } else { + pr_err("Wrong buffer/video queue type (%d)", type); + return ERR_PTR(-EINVAL); + } + + return frame; +} + +void gsc_hw_set_sw_reset(struct gsc_dev *dev); +int gsc_wait_reset(struct gsc_dev *dev); + +void gsc_hw_set_frm_done_irq_mask(struct gsc_dev *dev, bool mask); +void gsc_hw_set_gsc_irq_enable(struct gsc_dev *dev, bool mask); +void gsc_hw_set_input_buf_masking(struct gsc_dev *dev, u32 shift, bool enable); +void gsc_hw_set_output_buf_masking(struct gsc_dev *dev, u32 shift, bool enable); +void gsc_hw_set_input_addr(struct gsc_dev *dev, struct gsc_addr *addr, + int index); +void gsc_hw_set_output_addr(struct gsc_dev *dev, struct gsc_addr *addr, + int index); +void gsc_hw_set_input_path(struct gsc_ctx *ctx); +void gsc_hw_set_in_size(struct gsc_ctx *ctx); +void gsc_hw_set_in_image_rgb(struct gsc_ctx *ctx); +void gsc_hw_set_in_image_format(struct gsc_ctx *ctx); +void gsc_hw_set_output_path(struct gsc_ctx *ctx); +void gsc_hw_set_out_size(struct gsc_ctx *ctx); +void gsc_hw_set_out_image_rgb(struct gsc_ctx *ctx); +void gsc_hw_set_out_image_format(struct gsc_ctx *ctx); +void gsc_hw_set_prescaler(struct gsc_ctx *ctx); +void gsc_hw_set_mainscaler(struct gsc_ctx *ctx); +void gsc_hw_set_rotation(struct gsc_ctx *ctx); +void gsc_hw_set_global_alpha(struct gsc_ctx *ctx); +void gsc_hw_set_sfr_update(struct gsc_ctx *ctx); + +#endif /* GSC_CORE_H_ */ diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c new file mode 100644 index 00000000..e576ff2d --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c @@ -0,0 +1,790 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung EXYNOS5 SoC series G-Scaler driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "gsc-core.h" + +static int gsc_m2m_ctx_stop_req(struct gsc_ctx *ctx) +{ + struct gsc_ctx *curr_ctx; + struct gsc_dev *gsc = ctx->gsc_dev; + int ret; + + curr_ctx = v4l2_m2m_get_curr_priv(gsc->m2m.m2m_dev); + if (!gsc_m2m_pending(gsc) || (curr_ctx != ctx)) + return 0; + + gsc_ctx_state_lock_set(GSC_CTX_STOP_REQ, ctx); + ret = wait_event_timeout(gsc->irq_queue, + !gsc_ctx_state_is_set(GSC_CTX_STOP_REQ, ctx), + GSC_SHUTDOWN_TIMEOUT); + + return ret == 0 ? -ETIMEDOUT : ret; +} + +static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct gsc_ctx *ctx = q->drv_priv; + int ret; + + ret = pm_runtime_get_sync(&ctx->gsc_dev->pdev->dev); + return ret > 0 ? 0 : ret; +} + +static int gsc_m2m_stop_streaming(struct vb2_queue *q) +{ + struct gsc_ctx *ctx = q->drv_priv; + int ret; + + ret = gsc_m2m_ctx_stop_req(ctx); + if (ret == -ETIMEDOUT) + gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); + + pm_runtime_put(&ctx->gsc_dev->pdev->dev); + + return 0; +} + +void gsc_m2m_job_finish(struct gsc_ctx *ctx, int vb_state) +{ + struct vb2_buffer *src_vb, *dst_vb; + + if (!ctx || !ctx->m2m_ctx) + return; + + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + + if (src_vb && dst_vb) { + src_vb->v4l2_buf.timestamp = dst_vb->v4l2_buf.timestamp; + src_vb->v4l2_buf.timecode = dst_vb->v4l2_buf.timecode; + + v4l2_m2m_buf_done(src_vb, vb_state); + v4l2_m2m_buf_done(dst_vb, vb_state); + + v4l2_m2m_job_finish(ctx->gsc_dev->m2m.m2m_dev, + ctx->m2m_ctx); + } +} + + +static void gsc_m2m_job_abort(void *priv) +{ + struct gsc_ctx *ctx = priv; + int ret; + + ret = gsc_m2m_ctx_stop_req(ctx); + if (ret == -ETIMEDOUT) + gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); +} + +static int gsc_get_bufs(struct gsc_ctx *ctx) +{ + struct gsc_frame *s_frame, *d_frame; + struct vb2_buffer *src_vb, *dst_vb; + int ret; + + s_frame = &ctx->s_frame; + d_frame = &ctx->d_frame; + + src_vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + ret = gsc_prepare_addr(ctx, src_vb, s_frame, &s_frame->addr); + if (ret) + return ret; + + dst_vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + ret = gsc_prepare_addr(ctx, dst_vb, d_frame, &d_frame->addr); + if (ret) + return ret; + + dst_vb->v4l2_buf.timestamp = src_vb->v4l2_buf.timestamp; + + return 0; +} + +static void gsc_m2m_device_run(void *priv) +{ + struct gsc_ctx *ctx = priv; + struct gsc_dev *gsc; + unsigned long flags; + int ret; + bool is_set = false; + + if (WARN(!ctx, "null hardware context\n")) + return; + + gsc = ctx->gsc_dev; + spin_lock_irqsave(&gsc->slock, flags); + + set_bit(ST_M2M_PEND, &gsc->state); + + /* Reconfigure hardware if the context has changed. */ + if (gsc->m2m.ctx != ctx) { + pr_debug("gsc->m2m.ctx = 0x%p, current_ctx = 0x%p", + gsc->m2m.ctx, ctx); + ctx->state |= GSC_PARAMS; + gsc->m2m.ctx = ctx; + } + + is_set = (ctx->state & GSC_CTX_STOP_REQ) ? 1 : 0; + ctx->state &= ~GSC_CTX_STOP_REQ; + if (is_set) { + wake_up(&gsc->irq_queue); + goto put_device; + } + + ret = gsc_get_bufs(ctx); + if (ret) { + pr_err("Wrong address"); + goto put_device; + } + + gsc_set_prefbuf(gsc, &ctx->s_frame); + gsc_hw_set_input_addr(gsc, &ctx->s_frame.addr, GSC_M2M_BUF_NUM); + gsc_hw_set_output_addr(gsc, &ctx->d_frame.addr, GSC_M2M_BUF_NUM); + + if (ctx->state & GSC_PARAMS) { + gsc_hw_set_input_buf_masking(gsc, GSC_M2M_BUF_NUM, false); + gsc_hw_set_output_buf_masking(gsc, GSC_M2M_BUF_NUM, false); + gsc_hw_set_frm_done_irq_mask(gsc, false); + gsc_hw_set_gsc_irq_enable(gsc, true); + + if (gsc_set_scaler_info(ctx)) { + pr_err("Scaler setup error"); + goto put_device; + } + + gsc_hw_set_input_path(ctx); + gsc_hw_set_in_size(ctx); + gsc_hw_set_in_image_format(ctx); + + gsc_hw_set_output_path(ctx); + gsc_hw_set_out_size(ctx); + gsc_hw_set_out_image_format(ctx); + + gsc_hw_set_prescaler(ctx); + gsc_hw_set_mainscaler(ctx); + gsc_hw_set_rotation(ctx); + gsc_hw_set_global_alpha(ctx); + } + + /* update shadow registers */ + gsc_hw_set_sfr_update(ctx); + + ctx->state &= ~GSC_PARAMS; + gsc_hw_enable_control(gsc, true); + + spin_unlock_irqrestore(&gsc->slock, flags); + return; + +put_device: + ctx->state &= ~GSC_PARAMS; + spin_unlock_irqrestore(&gsc->slock, flags); +} + +static int gsc_m2m_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *allocators[]) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vq); + struct gsc_frame *frame; + int i; + + frame = ctx_get_frame(ctx, vq->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + if (!frame->fmt) + return -EINVAL; + + *num_planes = frame->fmt->num_planes; + for (i = 0; i < frame->fmt->num_planes; i++) { + sizes[i] = frame->payload[i]; + allocators[i] = ctx->gsc_dev->alloc_ctx; + } + return 0; +} + +static int gsc_m2m_buf_prepare(struct vb2_buffer *vb) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct gsc_frame *frame; + int i; + + frame = ctx_get_frame(ctx, vb->vb2_queue->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { + for (i = 0; i < frame->fmt->num_planes; i++) + vb2_set_plane_payload(vb, i, frame->payload[i]); + } + + return 0; +} + +static void gsc_m2m_buf_queue(struct vb2_buffer *vb) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + + pr_debug("ctx: %p, ctx->state: 0x%x", ctx, ctx->state); + + if (ctx->m2m_ctx) + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static struct vb2_ops gsc_m2m_qops = { + .queue_setup = gsc_m2m_queue_setup, + .buf_prepare = gsc_m2m_buf_prepare, + .buf_queue = gsc_m2m_buf_queue, + .wait_prepare = gsc_unlock, + .wait_finish = gsc_lock, + .stop_streaming = gsc_m2m_stop_streaming, + .start_streaming = gsc_m2m_start_streaming, +}; + +static int gsc_m2m_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + struct gsc_dev *gsc = ctx->gsc_dev; + + strlcpy(cap->driver, gsc->pdev->name, sizeof(cap->driver)); + strlcpy(cap->card, gsc->pdev->name, sizeof(cap->card)); + strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info)); + cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_M2M_MPLANE | + V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE; + + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int gsc_m2m_enum_fmt_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return gsc_enum_fmt_mplane(f); +} + +static int gsc_m2m_g_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + + return gsc_g_fmt_mplane(ctx, f); +} + +static int gsc_m2m_try_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + + return gsc_try_fmt_mplane(ctx, f); +} + +static int gsc_m2m_s_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + struct vb2_queue *vq; + struct gsc_frame *frame; + struct v4l2_pix_format_mplane *pix; + int i, ret = 0; + + ret = gsc_m2m_try_fmt_mplane(file, fh, f); + if (ret) + return ret; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + + if (vb2_is_streaming(vq)) { + pr_err("queue (%d) busy", f->type); + return -EBUSY; + } + + if (V4L2_TYPE_IS_OUTPUT(f->type)) + frame = &ctx->s_frame; + else + frame = &ctx->d_frame; + + pix = &f->fmt.pix_mp; + frame->fmt = find_fmt(&pix->pixelformat, NULL, 0); + frame->colorspace = pix->colorspace; + if (!frame->fmt) + return -EINVAL; + + for (i = 0; i < frame->fmt->num_planes; i++) + frame->payload[i] = pix->plane_fmt[i].sizeimage; + + gsc_set_frame_size(frame, pix->width, pix->height); + + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + gsc_ctx_state_lock_set(GSC_PARAMS | GSC_DST_FMT, ctx); + else + gsc_ctx_state_lock_set(GSC_PARAMS | GSC_SRC_FMT, ctx); + + pr_debug("f_w: %d, f_h: %d", frame->f_width, frame->f_height); + + return 0; +} + +static int gsc_m2m_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *reqbufs) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + struct gsc_dev *gsc = ctx->gsc_dev; + struct gsc_frame *frame; + u32 max_cnt; + + max_cnt = (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) ? + gsc->variant->in_buf_cnt : gsc->variant->out_buf_cnt; + if (reqbufs->count > max_cnt) { + return -EINVAL; + } else if (reqbufs->count == 0) { + if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + gsc_ctx_state_lock_clear(GSC_SRC_FMT, ctx); + else + gsc_ctx_state_lock_clear(GSC_DST_FMT, ctx); + } + + frame = ctx_get_frame(ctx, reqbufs->type); + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int gsc_m2m_expbuf(struct file *file, void *fh, + struct v4l2_exportbuffer *eb) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_expbuf(file, ctx->m2m_ctx, eb); +} + +static int gsc_m2m_querybuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int gsc_m2m_qbuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int gsc_m2m_dqbuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int gsc_m2m_streamon(struct file *file, void *fh, + enum v4l2_buf_type type) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + + /* The source and target color format need to be set */ + if (V4L2_TYPE_IS_OUTPUT(type)) { + if (!gsc_ctx_state_is_set(GSC_SRC_FMT, ctx)) + return -EINVAL; + } else if (!gsc_ctx_state_is_set(GSC_DST_FMT, ctx)) { + return -EINVAL; + } + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int gsc_m2m_streamoff(struct file *file, void *fh, + enum v4l2_buf_type type) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +/* Return 1 if rectangle a is enclosed in rectangle b, or 0 otherwise. */ +static int is_rectangle_enclosed(struct v4l2_rect *a, struct v4l2_rect *b) +{ + if (a->left < b->left || a->top < b->top) + return 0; + + if (a->left + a->width > b->left + b->width) + return 0; + + if (a->top + a->height > b->top + b->height) + return 0; + + return 1; +} + +static int gsc_m2m_g_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct gsc_frame *frame; + struct gsc_ctx *ctx = fh_to_ctx(fh); + + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)) + return -EINVAL; + + frame = ctx_get_frame(ctx, s->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + s->r.left = 0; + s->r.top = 0; + s->r.width = frame->f_width; + s->r.height = frame->f_height; + return 0; + + case V4L2_SEL_TGT_COMPOSE: + case V4L2_SEL_TGT_CROP: + s->r.left = frame->crop.left; + s->r.top = frame->crop.top; + s->r.width = frame->crop.width; + s->r.height = frame->crop.height; + return 0; + } + + return -EINVAL; +} + +static int gsc_m2m_s_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct gsc_frame *frame; + struct gsc_ctx *ctx = fh_to_ctx(fh); + struct v4l2_crop cr; + struct gsc_variant *variant = ctx->gsc_dev->variant; + int ret; + + cr.type = s->type; + cr.c = s->r; + + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)) + return -EINVAL; + + ret = gsc_try_crop(ctx, &cr); + if (ret) + return ret; + + if (s->flags & V4L2_SEL_FLAG_LE && + !is_rectangle_enclosed(&cr.c, &s->r)) + return -ERANGE; + + if (s->flags & V4L2_SEL_FLAG_GE && + !is_rectangle_enclosed(&s->r, &cr.c)) + return -ERANGE; + + s->r = cr.c; + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE: + frame = &ctx->s_frame; + break; + + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP: + case V4L2_SEL_TGT_CROP_DEFAULT: + frame = &ctx->d_frame; + break; + + default: + return -EINVAL; + } + + /* Check to see if scaling ratio is within supported range */ + if (gsc_ctx_state_is_set(GSC_DST_FMT | GSC_SRC_FMT, ctx)) { + if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = gsc_check_scaler_ratio(variant, cr.c.width, + cr.c.height, ctx->d_frame.crop.width, + ctx->d_frame.crop.height, + ctx->gsc_ctrls.rotate->val, ctx->out_path); + } else { + ret = gsc_check_scaler_ratio(variant, + ctx->s_frame.crop.width, + ctx->s_frame.crop.height, cr.c.width, + cr.c.height, ctx->gsc_ctrls.rotate->val, + ctx->out_path); + } + + if (ret) { + pr_err("Out of scaler range"); + return -EINVAL; + } + } + + frame->crop = cr.c; + + gsc_ctx_state_lock_set(GSC_PARAMS, ctx); + return 0; +} + +static const struct v4l2_ioctl_ops gsc_m2m_ioctl_ops = { + .vidioc_querycap = gsc_m2m_querycap, + .vidioc_enum_fmt_vid_cap_mplane = gsc_m2m_enum_fmt_mplane, + .vidioc_enum_fmt_vid_out_mplane = gsc_m2m_enum_fmt_mplane, + .vidioc_g_fmt_vid_cap_mplane = gsc_m2m_g_fmt_mplane, + .vidioc_g_fmt_vid_out_mplane = gsc_m2m_g_fmt_mplane, + .vidioc_try_fmt_vid_cap_mplane = gsc_m2m_try_fmt_mplane, + .vidioc_try_fmt_vid_out_mplane = gsc_m2m_try_fmt_mplane, + .vidioc_s_fmt_vid_cap_mplane = gsc_m2m_s_fmt_mplane, + .vidioc_s_fmt_vid_out_mplane = gsc_m2m_s_fmt_mplane, + .vidioc_reqbufs = gsc_m2m_reqbufs, + .vidioc_expbuf = gsc_m2m_expbuf, + .vidioc_querybuf = gsc_m2m_querybuf, + .vidioc_qbuf = gsc_m2m_qbuf, + .vidioc_dqbuf = gsc_m2m_dqbuf, + .vidioc_streamon = gsc_m2m_streamon, + .vidioc_streamoff = gsc_m2m_streamoff, + .vidioc_g_selection = gsc_m2m_g_selection, + .vidioc_s_selection = gsc_m2m_s_selection +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct gsc_ctx *ctx = priv; + int ret; + + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + src_vq->drv_priv = ctx; + src_vq->ops = &gsc_m2m_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + dst_vq->drv_priv = ctx; + dst_vq->ops = &gsc_m2m_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + return vb2_queue_init(dst_vq); +} + +static int gsc_m2m_open(struct file *file) +{ + struct gsc_dev *gsc = video_drvdata(file); + struct gsc_ctx *ctx = NULL; + int ret; + + pr_debug("pid: %d, state: 0x%lx", task_pid_nr(current), gsc->state); + + if (mutex_lock_interruptible(&gsc->lock)) + return -ERESTARTSYS; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + ret = -ENOMEM; + goto unlock; + } + + v4l2_fh_init(&ctx->fh, gsc->m2m.vfd); + ret = gsc_ctrls_create(ctx); + if (ret) + goto error_fh; + + /* Use separate control handler per file handle */ + ctx->fh.ctrl_handler = &ctx->ctrl_handler; + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + + ctx->gsc_dev = gsc; + /* Default color format */ + ctx->s_frame.fmt = get_format(0); + ctx->d_frame.fmt = get_format(0); + /* Setup the device context for mem2mem mode. */ + ctx->state = GSC_CTX_M2M; + ctx->flags = 0; + ctx->in_path = GSC_DMA; + ctx->out_path = GSC_DMA; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(gsc->m2m.m2m_dev, ctx, queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + pr_err("Failed to initialize m2m context"); + ret = PTR_ERR(ctx->m2m_ctx); + goto error_ctrls; + } + + if (gsc->m2m.refcnt++ == 0) + set_bit(ST_M2M_OPEN, &gsc->state); + + pr_debug("gsc m2m driver is opened, ctx(0x%p)", ctx); + + mutex_unlock(&gsc->lock); + return 0; + +error_ctrls: + gsc_ctrls_delete(ctx); +error_fh: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); +unlock: + mutex_unlock(&gsc->lock); + return ret; +} + +static int gsc_m2m_release(struct file *file) +{ + struct gsc_ctx *ctx = fh_to_ctx(file->private_data); + struct gsc_dev *gsc = ctx->gsc_dev; + + pr_debug("pid: %d, state: 0x%lx, refcnt= %d", + task_pid_nr(current), gsc->state, gsc->m2m.refcnt); + + mutex_lock(&gsc->lock); + + v4l2_m2m_ctx_release(ctx->m2m_ctx); + gsc_ctrls_delete(ctx); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + + if (--gsc->m2m.refcnt <= 0) + clear_bit(ST_M2M_OPEN, &gsc->state); + kfree(ctx); + + mutex_unlock(&gsc->lock); + return 0; +} + +static unsigned int gsc_m2m_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct gsc_ctx *ctx = fh_to_ctx(file->private_data); + struct gsc_dev *gsc = ctx->gsc_dev; + int ret; + + if (mutex_lock_interruptible(&gsc->lock)) + return -ERESTARTSYS; + + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_unlock(&gsc->lock); + + return ret; +} + +static int gsc_m2m_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct gsc_ctx *ctx = fh_to_ctx(file->private_data); + struct gsc_dev *gsc = ctx->gsc_dev; + int ret; + + if (mutex_lock_interruptible(&gsc->lock)) + return -ERESTARTSYS; + + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&gsc->lock); + + return ret; +} + +static const struct v4l2_file_operations gsc_m2m_fops = { + .owner = THIS_MODULE, + .open = gsc_m2m_open, + .release = gsc_m2m_release, + .poll = gsc_m2m_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = gsc_m2m_mmap, +}; + +static struct v4l2_m2m_ops gsc_m2m_ops = { + .device_run = gsc_m2m_device_run, + .job_abort = gsc_m2m_job_abort, +}; + +int gsc_register_m2m_device(struct gsc_dev *gsc) +{ + struct platform_device *pdev; + int ret; + + if (!gsc) + return -ENODEV; + + pdev = gsc->pdev; + + gsc->vdev.fops = &gsc_m2m_fops; + gsc->vdev.ioctl_ops = &gsc_m2m_ioctl_ops; + gsc->vdev.release = video_device_release_empty; + gsc->vdev.lock = &gsc->lock; + gsc->vdev.vfl_dir = VFL_DIR_M2M; + gsc->vdev.v4l2_dev = &gsc->v4l2_dev; + snprintf(gsc->vdev.name, sizeof(gsc->vdev.name), "%s.%d:m2m", + GSC_MODULE_NAME, gsc->id); + + video_set_drvdata(&gsc->vdev, gsc); + + gsc->m2m.vfd = &gsc->vdev; + gsc->m2m.m2m_dev = v4l2_m2m_init(&gsc_m2m_ops); + if (IS_ERR(gsc->m2m.m2m_dev)) { + dev_err(&pdev->dev, "failed to initialize v4l2-m2m device\n"); + ret = PTR_ERR(gsc->m2m.m2m_dev); + goto err_m2m_r1; + } + + ret = video_register_device(&gsc->vdev, VFL_TYPE_GRABBER, -1); + if (ret) { + dev_err(&pdev->dev, + "%s(): failed to register video device\n", __func__); + goto err_m2m_r2; + } + + pr_debug("gsc m2m driver registered as /dev/video%d", gsc->vdev.num); + return 0; + +err_m2m_r2: + v4l2_m2m_release(gsc->m2m.m2m_dev); +err_m2m_r1: + video_device_release(gsc->m2m.vfd); + + return ret; +} + +void gsc_unregister_m2m_device(struct gsc_dev *gsc) +{ + if (gsc) + v4l2_m2m_release(gsc->m2m.m2m_dev); +} diff --git a/drivers/media/platform/exynos-gsc/gsc-regs.c b/drivers/media/platform/exynos-gsc/gsc-regs.c new file mode 100644 index 00000000..e22d147a --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-regs.c @@ -0,0 +1,430 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung EXYNOS5 SoC series G-Scaler driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include + +#include "gsc-core.h" + +void gsc_hw_set_sw_reset(struct gsc_dev *dev) +{ + writel(GSC_SW_RESET_SRESET, dev->regs + GSC_SW_RESET); +} + +int gsc_wait_reset(struct gsc_dev *dev) +{ + unsigned long end = jiffies + msecs_to_jiffies(50); + u32 cfg; + + while (time_before(jiffies, end)) { + cfg = readl(dev->regs + GSC_SW_RESET); + if (!cfg) + return 0; + usleep_range(10, 20); + } + + return -EBUSY; +} + +void gsc_hw_set_frm_done_irq_mask(struct gsc_dev *dev, bool mask) +{ + u32 cfg; + + cfg = readl(dev->regs + GSC_IRQ); + if (mask) + cfg |= GSC_IRQ_FRMDONE_MASK; + else + cfg &= ~GSC_IRQ_FRMDONE_MASK; + writel(cfg, dev->regs + GSC_IRQ); +} + +void gsc_hw_set_gsc_irq_enable(struct gsc_dev *dev, bool mask) +{ + u32 cfg; + + cfg = readl(dev->regs + GSC_IRQ); + if (mask) + cfg |= GSC_IRQ_ENABLE; + else + cfg &= ~GSC_IRQ_ENABLE; + writel(cfg, dev->regs + GSC_IRQ); +} + +void gsc_hw_set_input_buf_masking(struct gsc_dev *dev, u32 shift, + bool enable) +{ + u32 cfg = readl(dev->regs + GSC_IN_BASE_ADDR_Y_MASK); + u32 mask = 1 << shift; + + cfg &= ~mask; + cfg |= enable << shift; + + writel(cfg, dev->regs + GSC_IN_BASE_ADDR_Y_MASK); + writel(cfg, dev->regs + GSC_IN_BASE_ADDR_CB_MASK); + writel(cfg, dev->regs + GSC_IN_BASE_ADDR_CR_MASK); +} + +void gsc_hw_set_output_buf_masking(struct gsc_dev *dev, u32 shift, + bool enable) +{ + u32 cfg = readl(dev->regs + GSC_OUT_BASE_ADDR_Y_MASK); + u32 mask = 1 << shift; + + cfg &= ~mask; + cfg |= enable << shift; + + writel(cfg, dev->regs + GSC_OUT_BASE_ADDR_Y_MASK); + writel(cfg, dev->regs + GSC_OUT_BASE_ADDR_CB_MASK); + writel(cfg, dev->regs + GSC_OUT_BASE_ADDR_CR_MASK); +} + +void gsc_hw_set_input_addr(struct gsc_dev *dev, struct gsc_addr *addr, + int index) +{ + pr_debug("src_buf[%d]: 0x%X, cb: 0x%X, cr: 0x%X", index, + addr->y, addr->cb, addr->cr); + writel(addr->y, dev->regs + GSC_IN_BASE_ADDR_Y(index)); + writel(addr->cb, dev->regs + GSC_IN_BASE_ADDR_CB(index)); + writel(addr->cr, dev->regs + GSC_IN_BASE_ADDR_CR(index)); + +} + +void gsc_hw_set_output_addr(struct gsc_dev *dev, + struct gsc_addr *addr, int index) +{ + pr_debug("dst_buf[%d]: 0x%X, cb: 0x%X, cr: 0x%X", + index, addr->y, addr->cb, addr->cr); + writel(addr->y, dev->regs + GSC_OUT_BASE_ADDR_Y(index)); + writel(addr->cb, dev->regs + GSC_OUT_BASE_ADDR_CB(index)); + writel(addr->cr, dev->regs + GSC_OUT_BASE_ADDR_CR(index)); +} + +void gsc_hw_set_input_path(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + + u32 cfg = readl(dev->regs + GSC_IN_CON); + cfg &= ~(GSC_IN_PATH_MASK | GSC_IN_LOCAL_SEL_MASK); + + if (ctx->in_path == GSC_DMA) + cfg |= GSC_IN_PATH_MEMORY; + + writel(cfg, dev->regs + GSC_IN_CON); +} + +void gsc_hw_set_in_size(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->s_frame; + u32 cfg; + + /* Set input pixel offset */ + cfg = GSC_SRCIMG_OFFSET_X(frame->crop.left); + cfg |= GSC_SRCIMG_OFFSET_Y(frame->crop.top); + writel(cfg, dev->regs + GSC_SRCIMG_OFFSET); + + /* Set input original size */ + cfg = GSC_SRCIMG_WIDTH(frame->f_width); + cfg |= GSC_SRCIMG_HEIGHT(frame->f_height); + writel(cfg, dev->regs + GSC_SRCIMG_SIZE); + + /* Set input cropped size */ + cfg = GSC_CROPPED_WIDTH(frame->crop.width); + cfg |= GSC_CROPPED_HEIGHT(frame->crop.height); + writel(cfg, dev->regs + GSC_CROPPED_SIZE); +} + +void gsc_hw_set_in_image_rgb(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->s_frame; + u32 cfg; + + cfg = readl(dev->regs + GSC_IN_CON); + if (frame->colorspace == V4L2_COLORSPACE_REC709) + cfg |= GSC_IN_RGB_HD_WIDE; + else + cfg |= GSC_IN_RGB_SD_WIDE; + + if (frame->fmt->pixelformat == V4L2_PIX_FMT_RGB565X) + cfg |= GSC_IN_RGB565; + else if (frame->fmt->pixelformat == V4L2_PIX_FMT_RGB32) + cfg |= GSC_IN_XRGB8888; + + writel(cfg, dev->regs + GSC_IN_CON); +} + +void gsc_hw_set_in_image_format(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->s_frame; + u32 i, depth = 0; + u32 cfg; + + cfg = readl(dev->regs + GSC_IN_CON); + cfg &= ~(GSC_IN_RGB_TYPE_MASK | GSC_IN_YUV422_1P_ORDER_MASK | + GSC_IN_CHROMA_ORDER_MASK | GSC_IN_FORMAT_MASK | + GSC_IN_TILE_TYPE_MASK | GSC_IN_TILE_MODE); + writel(cfg, dev->regs + GSC_IN_CON); + + if (is_rgb(frame->fmt->color)) { + gsc_hw_set_in_image_rgb(ctx); + return; + } + for (i = 0; i < frame->fmt->num_planes; i++) + depth += frame->fmt->depth[i]; + + switch (frame->fmt->num_comp) { + case 1: + cfg |= GSC_IN_YUV422_1P; + if (frame->fmt->yorder == GSC_LSB_Y) + cfg |= GSC_IN_YUV422_1P_ORDER_LSB_Y; + else + cfg |= GSC_IN_YUV422_1P_OEDER_LSB_C; + if (frame->fmt->corder == GSC_CBCR) + cfg |= GSC_IN_CHROMA_ORDER_CBCR; + else + cfg |= GSC_IN_CHROMA_ORDER_CRCB; + break; + case 2: + if (depth == 12) + cfg |= GSC_IN_YUV420_2P; + else + cfg |= GSC_IN_YUV422_2P; + if (frame->fmt->corder == GSC_CBCR) + cfg |= GSC_IN_CHROMA_ORDER_CBCR; + else + cfg |= GSC_IN_CHROMA_ORDER_CRCB; + break; + case 3: + if (depth == 12) + cfg |= GSC_IN_YUV420_3P; + else + cfg |= GSC_IN_YUV422_3P; + break; + } + + if (is_tiled(frame->fmt)) + cfg |= GSC_IN_TILE_C_16x8 | GSC_IN_TILE_MODE; + + writel(cfg, dev->regs + GSC_IN_CON); +} + +void gsc_hw_set_output_path(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + + u32 cfg = readl(dev->regs + GSC_OUT_CON); + cfg &= ~GSC_OUT_PATH_MASK; + + if (ctx->out_path == GSC_DMA) + cfg |= GSC_OUT_PATH_MEMORY; + else + cfg |= GSC_OUT_PATH_LOCAL; + + writel(cfg, dev->regs + GSC_OUT_CON); +} + +void gsc_hw_set_out_size(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->d_frame; + u32 cfg; + + /* Set output original size */ + if (ctx->out_path == GSC_DMA) { + cfg = GSC_DSTIMG_OFFSET_X(frame->crop.left); + cfg |= GSC_DSTIMG_OFFSET_Y(frame->crop.top); + writel(cfg, dev->regs + GSC_DSTIMG_OFFSET); + + cfg = GSC_DSTIMG_WIDTH(frame->f_width); + cfg |= GSC_DSTIMG_HEIGHT(frame->f_height); + writel(cfg, dev->regs + GSC_DSTIMG_SIZE); + } + + /* Set output scaled size */ + if (ctx->gsc_ctrls.rotate->val == 90 || + ctx->gsc_ctrls.rotate->val == 270) { + cfg = GSC_SCALED_WIDTH(frame->crop.height); + cfg |= GSC_SCALED_HEIGHT(frame->crop.width); + } else { + cfg = GSC_SCALED_WIDTH(frame->crop.width); + cfg |= GSC_SCALED_HEIGHT(frame->crop.height); + } + writel(cfg, dev->regs + GSC_SCALED_SIZE); +} + +void gsc_hw_set_out_image_rgb(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->d_frame; + u32 cfg; + + cfg = readl(dev->regs + GSC_OUT_CON); + if (frame->colorspace == V4L2_COLORSPACE_REC709) + cfg |= GSC_OUT_RGB_HD_WIDE; + else + cfg |= GSC_OUT_RGB_SD_WIDE; + + if (frame->fmt->pixelformat == V4L2_PIX_FMT_RGB565X) + cfg |= GSC_OUT_RGB565; + else if (frame->fmt->pixelformat == V4L2_PIX_FMT_RGB32) + cfg |= GSC_OUT_XRGB8888; + + writel(cfg, dev->regs + GSC_OUT_CON); +} + +void gsc_hw_set_out_image_format(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->d_frame; + u32 i, depth = 0; + u32 cfg; + + cfg = readl(dev->regs + GSC_OUT_CON); + cfg &= ~(GSC_OUT_RGB_TYPE_MASK | GSC_OUT_YUV422_1P_ORDER_MASK | + GSC_OUT_CHROMA_ORDER_MASK | GSC_OUT_FORMAT_MASK | + GSC_OUT_TILE_TYPE_MASK | GSC_OUT_TILE_MODE); + writel(cfg, dev->regs + GSC_OUT_CON); + + if (is_rgb(frame->fmt->color)) { + gsc_hw_set_out_image_rgb(ctx); + return; + } + + if (ctx->out_path != GSC_DMA) { + cfg |= GSC_OUT_YUV444; + goto end_set; + } + + for (i = 0; i < frame->fmt->num_planes; i++) + depth += frame->fmt->depth[i]; + + switch (frame->fmt->num_comp) { + case 1: + cfg |= GSC_OUT_YUV422_1P; + if (frame->fmt->yorder == GSC_LSB_Y) + cfg |= GSC_OUT_YUV422_1P_ORDER_LSB_Y; + else + cfg |= GSC_OUT_YUV422_1P_OEDER_LSB_C; + if (frame->fmt->corder == GSC_CBCR) + cfg |= GSC_OUT_CHROMA_ORDER_CBCR; + else + cfg |= GSC_OUT_CHROMA_ORDER_CRCB; + break; + case 2: + if (depth == 12) + cfg |= GSC_OUT_YUV420_2P; + else + cfg |= GSC_OUT_YUV422_2P; + if (frame->fmt->corder == GSC_CBCR) + cfg |= GSC_OUT_CHROMA_ORDER_CBCR; + else + cfg |= GSC_OUT_CHROMA_ORDER_CRCB; + break; + case 3: + cfg |= GSC_OUT_YUV420_3P; + break; + } + + if (is_tiled(frame->fmt)) + cfg |= GSC_OUT_TILE_C_16x8 | GSC_OUT_TILE_MODE; + +end_set: + writel(cfg, dev->regs + GSC_OUT_CON); +} + +void gsc_hw_set_prescaler(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_scaler *sc = &ctx->scaler; + u32 cfg; + + cfg = GSC_PRESC_SHFACTOR(sc->pre_shfactor); + cfg |= GSC_PRESC_H_RATIO(sc->pre_hratio); + cfg |= GSC_PRESC_V_RATIO(sc->pre_vratio); + writel(cfg, dev->regs + GSC_PRE_SCALE_RATIO); +} + +void gsc_hw_set_mainscaler(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_scaler *sc = &ctx->scaler; + u32 cfg; + + cfg = GSC_MAIN_H_RATIO_VALUE(sc->main_hratio); + writel(cfg, dev->regs + GSC_MAIN_H_RATIO); + + cfg = GSC_MAIN_V_RATIO_VALUE(sc->main_vratio); + writel(cfg, dev->regs + GSC_MAIN_V_RATIO); +} + +void gsc_hw_set_rotation(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + u32 cfg; + + cfg = readl(dev->regs + GSC_IN_CON); + cfg &= ~GSC_IN_ROT_MASK; + + switch (ctx->gsc_ctrls.rotate->val) { + case 270: + cfg |= GSC_IN_ROT_270; + break; + case 180: + cfg |= GSC_IN_ROT_180; + break; + case 90: + if (ctx->gsc_ctrls.hflip->val) + cfg |= GSC_IN_ROT_90_XFLIP; + else if (ctx->gsc_ctrls.vflip->val) + cfg |= GSC_IN_ROT_90_YFLIP; + else + cfg |= GSC_IN_ROT_90; + break; + case 0: + if (ctx->gsc_ctrls.hflip->val) + cfg |= GSC_IN_ROT_XFLIP; + else if (ctx->gsc_ctrls.vflip->val) + cfg |= GSC_IN_ROT_YFLIP; + } + + writel(cfg, dev->regs + GSC_IN_CON); +} + +void gsc_hw_set_global_alpha(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->d_frame; + u32 cfg; + + if (!is_rgb(frame->fmt->color)) { + pr_debug("Not a RGB format"); + return; + } + + cfg = readl(dev->regs + GSC_OUT_CON); + cfg &= ~GSC_OUT_GLOBAL_ALPHA_MASK; + + cfg |= GSC_OUT_GLOBAL_ALPHA(ctx->gsc_ctrls.global_alpha->val); + writel(cfg, dev->regs + GSC_OUT_CON); +} + +void gsc_hw_set_sfr_update(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + u32 cfg; + + cfg = readl(dev->regs + GSC_ENABLE); + cfg |= GSC_ENABLE_SFR_UPDATE; + writel(cfg, dev->regs + GSC_ENABLE); +} diff --git a/drivers/media/platform/exynos-gsc/gsc-regs.h b/drivers/media/platform/exynos-gsc/gsc-regs.h new file mode 100644 index 00000000..4678f9a6 --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-regs.h @@ -0,0 +1,172 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Register definition file for Samsung G-Scaler driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef REGS_GSC_H_ +#define REGS_GSC_H_ + +/* G-Scaler enable */ +#define GSC_ENABLE 0x00 +#define GSC_ENABLE_OP_STATUS (1 << 2) +#define GSC_ENABLE_SFR_UPDATE (1 << 1) +#define GSC_ENABLE_ON (1 << 0) + +/* G-Scaler S/W reset */ +#define GSC_SW_RESET 0x04 +#define GSC_SW_RESET_SRESET (1 << 0) + +/* G-Scaler IRQ */ +#define GSC_IRQ 0x08 +#define GSC_IRQ_STATUS_OR_IRQ (1 << 17) +#define GSC_IRQ_STATUS_FRM_DONE_IRQ (1 << 16) +#define GSC_IRQ_FRMDONE_MASK (1 << 1) +#define GSC_IRQ_ENABLE (1 << 0) + +/* G-Scaler input control */ +#define GSC_IN_CON 0x10 +#define GSC_IN_ROT_MASK (7 << 16) +#define GSC_IN_ROT_270 (7 << 16) +#define GSC_IN_ROT_90_YFLIP (6 << 16) +#define GSC_IN_ROT_90_XFLIP (5 << 16) +#define GSC_IN_ROT_90 (4 << 16) +#define GSC_IN_ROT_180 (3 << 16) +#define GSC_IN_ROT_YFLIP (2 << 16) +#define GSC_IN_ROT_XFLIP (1 << 16) +#define GSC_IN_RGB_TYPE_MASK (3 << 14) +#define GSC_IN_RGB_HD_NARROW (3 << 14) +#define GSC_IN_RGB_HD_WIDE (2 << 14) +#define GSC_IN_RGB_SD_NARROW (1 << 14) +#define GSC_IN_RGB_SD_WIDE (0 << 14) +#define GSC_IN_YUV422_1P_ORDER_MASK (1 << 13) +#define GSC_IN_YUV422_1P_ORDER_LSB_Y (0 << 13) +#define GSC_IN_YUV422_1P_OEDER_LSB_C (1 << 13) +#define GSC_IN_CHROMA_ORDER_MASK (1 << 12) +#define GSC_IN_CHROMA_ORDER_CBCR (0 << 12) +#define GSC_IN_CHROMA_ORDER_CRCB (1 << 12) +#define GSC_IN_FORMAT_MASK (7 << 8) +#define GSC_IN_XRGB8888 (0 << 8) +#define GSC_IN_RGB565 (1 << 8) +#define GSC_IN_YUV420_2P (2 << 8) +#define GSC_IN_YUV420_3P (3 << 8) +#define GSC_IN_YUV422_1P (4 << 8) +#define GSC_IN_YUV422_2P (5 << 8) +#define GSC_IN_YUV422_3P (6 << 8) +#define GSC_IN_TILE_TYPE_MASK (1 << 4) +#define GSC_IN_TILE_C_16x8 (0 << 4) +#define GSC_IN_TILE_MODE (1 << 3) +#define GSC_IN_LOCAL_SEL_MASK (3 << 1) +#define GSC_IN_PATH_MASK (1 << 0) +#define GSC_IN_PATH_MEMORY (0 << 0) + +/* G-Scaler source image size */ +#define GSC_SRCIMG_SIZE 0x14 +#define GSC_SRCIMG_HEIGHT(x) ((x) << 16) +#define GSC_SRCIMG_WIDTH(x) ((x) << 0) + +/* G-Scaler source image offset */ +#define GSC_SRCIMG_OFFSET 0x18 +#define GSC_SRCIMG_OFFSET_Y(x) ((x) << 16) +#define GSC_SRCIMG_OFFSET_X(x) ((x) << 0) + +/* G-Scaler cropped source image size */ +#define GSC_CROPPED_SIZE 0x1c +#define GSC_CROPPED_HEIGHT(x) ((x) << 16) +#define GSC_CROPPED_WIDTH(x) ((x) << 0) + +/* G-Scaler output control */ +#define GSC_OUT_CON 0x20 +#define GSC_OUT_GLOBAL_ALPHA_MASK (0xff << 24) +#define GSC_OUT_GLOBAL_ALPHA(x) ((x) << 24) +#define GSC_OUT_RGB_TYPE_MASK (3 << 10) +#define GSC_OUT_RGB_HD_WIDE (3 << 10) +#define GSC_OUT_RGB_HD_NARROW (2 << 10) +#define GSC_OUT_RGB_SD_WIDE (1 << 10) +#define GSC_OUT_RGB_SD_NARROW (0 << 10) +#define GSC_OUT_YUV422_1P_ORDER_MASK (1 << 9) +#define GSC_OUT_YUV422_1P_ORDER_LSB_Y (0 << 9) +#define GSC_OUT_YUV422_1P_OEDER_LSB_C (1 << 9) +#define GSC_OUT_CHROMA_ORDER_MASK (1 << 8) +#define GSC_OUT_CHROMA_ORDER_CBCR (0 << 8) +#define GSC_OUT_CHROMA_ORDER_CRCB (1 << 8) +#define GSC_OUT_FORMAT_MASK (7 << 4) +#define GSC_OUT_XRGB8888 (0 << 4) +#define GSC_OUT_RGB565 (1 << 4) +#define GSC_OUT_YUV420_2P (2 << 4) +#define GSC_OUT_YUV420_3P (3 << 4) +#define GSC_OUT_YUV422_1P (4 << 4) +#define GSC_OUT_YUV422_2P (5 << 4) +#define GSC_OUT_YUV444 (7 << 4) +#define GSC_OUT_TILE_TYPE_MASK (1 << 2) +#define GSC_OUT_TILE_C_16x8 (0 << 2) +#define GSC_OUT_TILE_MODE (1 << 1) +#define GSC_OUT_PATH_MASK (1 << 0) +#define GSC_OUT_PATH_LOCAL (1 << 0) +#define GSC_OUT_PATH_MEMORY (0 << 0) + +/* G-Scaler scaled destination image size */ +#define GSC_SCALED_SIZE 0x24 +#define GSC_SCALED_HEIGHT(x) ((x) << 16) +#define GSC_SCALED_WIDTH(x) ((x) << 0) + +/* G-Scaler pre scale ratio */ +#define GSC_PRE_SCALE_RATIO 0x28 +#define GSC_PRESC_SHFACTOR(x) ((x) << 28) +#define GSC_PRESC_V_RATIO(x) ((x) << 16) +#define GSC_PRESC_H_RATIO(x) ((x) << 0) + +/* G-Scaler main scale horizontal ratio */ +#define GSC_MAIN_H_RATIO 0x2c +#define GSC_MAIN_H_RATIO_VALUE(x) ((x) << 0) + +/* G-Scaler main scale vertical ratio */ +#define GSC_MAIN_V_RATIO 0x30 +#define GSC_MAIN_V_RATIO_VALUE(x) ((x) << 0) + +/* G-Scaler destination image size */ +#define GSC_DSTIMG_SIZE 0x40 +#define GSC_DSTIMG_HEIGHT(x) ((x) << 16) +#define GSC_DSTIMG_WIDTH(x) ((x) << 0) + +/* G-Scaler destination image offset */ +#define GSC_DSTIMG_OFFSET 0x44 +#define GSC_DSTIMG_OFFSET_Y(x) ((x) << 16) +#define GSC_DSTIMG_OFFSET_X(x) ((x) << 0) + +/* G-Scaler input y address mask */ +#define GSC_IN_BASE_ADDR_Y_MASK 0x4c +/* G-Scaler input y base address */ +#define GSC_IN_BASE_ADDR_Y(n) (0x50 + (n) * 0x4) + +/* G-Scaler input cb address mask */ +#define GSC_IN_BASE_ADDR_CB_MASK 0x7c +/* G-Scaler input cb base address */ +#define GSC_IN_BASE_ADDR_CB(n) (0x80 + (n) * 0x4) + +/* G-Scaler input cr address mask */ +#define GSC_IN_BASE_ADDR_CR_MASK 0xac +/* G-Scaler input cr base address */ +#define GSC_IN_BASE_ADDR_CR(n) (0xb0 + (n) * 0x4) + +/* G-Scaler output y address mask */ +#define GSC_OUT_BASE_ADDR_Y_MASK 0x10c +/* G-Scaler output y base address */ +#define GSC_OUT_BASE_ADDR_Y(n) (0x110 + (n) * 0x4) + +/* G-Scaler output cb address mask */ +#define GSC_OUT_BASE_ADDR_CB_MASK 0x15c +/* G-Scaler output cb base address */ +#define GSC_OUT_BASE_ADDR_CB(n) (0x160 + (n) * 0x4) + +/* G-Scaler output cr address mask */ +#define GSC_OUT_BASE_ADDR_CR_MASK 0x1ac +/* G-Scaler output cr base address */ +#define GSC_OUT_BASE_ADDR_CR(n) (0x1b0 + (n) * 0x4) + +#endif /* REGS_GSC_H_ */ diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig new file mode 100644 index 00000000..6ff99b58 --- /dev/null +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -0,0 +1,61 @@ + +config VIDEO_SAMSUNG_EXYNOS4_IS + bool "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver" + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && PLAT_S5P && PM_RUNTIME + help + Say Y here to enable camera host interface devices for + Samsung S5P and EXYNOS SoC series. + +if VIDEO_SAMSUNG_EXYNOS4_IS + +config VIDEO_S5P_FIMC + tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver" + depends on I2C + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + select MFD_SYSCON if OF + help + This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC camera host + interface and video postprocessor (FIMC) devices. + + To compile this driver as a module, choose M here: the + module will be called s5p-fimc. + +config VIDEO_S5P_MIPI_CSIS + tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver" + depends on REGULATOR + select S5P_SETUP_MIPIPHY + help + This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 + receiver (MIPI-CSIS) devices. + + To compile this driver as a module, choose M here: the + module will be called s5p-csis. + +if SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 + +config VIDEO_EXYNOS_FIMC_LITE + tristate "EXYNOS FIMC-LITE camera interface driver" + depends on I2C + select VIDEOBUF2_DMA_CONTIG + help + This is a V4L2 driver for Samsung EXYNOS4/5 SoC FIMC-LITE camera + host interface. + + To compile this driver as a module, choose M here: the + module will be called exynos-fimc-lite. +endif + +config VIDEO_EXYNOS4_FIMC_IS + tristate "EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver" + select VIDEOBUF2_DMA_CONTIG + depends on OF + select FW_LOADER + help + This is a V4L2 driver for Samsung EXYNOS4x12 SoC series + FIMC-IS (Imaging Subsystem). + + To compile this driver as a module, choose M here: the + module will be called exynos4-fimc-is. + +endif # VIDEO_SAMSUNG_S5P_FIMC diff --git a/drivers/media/platform/exynos4-is/Makefile b/drivers/media/platform/exynos4-is/Makefile new file mode 100644 index 00000000..f25f4637 --- /dev/null +++ b/drivers/media/platform/exynos4-is/Makefile @@ -0,0 +1,10 @@ +s5p-fimc-objs := fimc-core.o fimc-reg.o fimc-m2m.o fimc-capture.o media-dev.o +exynos-fimc-lite-objs += fimc-lite-reg.o fimc-lite.o +exynos-fimc-is-objs := fimc-is.o fimc-isp.o fimc-is-sensor.o fimc-is-regs.o +exynos-fimc-is-objs += fimc-is-param.o fimc-is-errno.o fimc-is-i2c.o +s5p-csis-objs := mipi-csis.o + +obj-$(CONFIG_VIDEO_S5P_MIPI_CSIS) += s5p-csis.o +obj-$(CONFIG_VIDEO_EXYNOS_FIMC_LITE) += exynos-fimc-lite.o +obj-$(CONFIG_VIDEO_EXYNOS4_FIMC_IS) += exynos-fimc-is.o +obj-$(CONFIG_VIDEO_S5P_FIMC) += s5p-fimc.o diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c new file mode 100644 index 00000000..528f4136 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-capture.c @@ -0,0 +1,1893 @@ +/* + * Samsung S5P/EXYNOS4 SoC series camera interface (camera capture) driver + * + * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "media-dev.h" +#include "fimc-core.h" +#include "fimc-reg.h" + +static int fimc_capture_hw_init(struct fimc_dev *fimc) +{ + struct fimc_source_info *si = &fimc->vid_cap.source_config; + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + int ret; + unsigned long flags; + + if (ctx == NULL || ctx->s_frame.fmt == NULL) + return -EINVAL; + + if (si->fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK) { + ret = fimc_hw_camblk_cfg_writeback(fimc); + if (ret < 0) + return ret; + } + + spin_lock_irqsave(&fimc->slock, flags); + fimc_prepare_dma_offset(ctx, &ctx->d_frame); + fimc_set_yuv_order(ctx); + + fimc_hw_set_camera_polarity(fimc, si); + fimc_hw_set_camera_type(fimc, si); + fimc_hw_set_camera_source(fimc, si); + fimc_hw_set_camera_offset(fimc, &ctx->s_frame); + + ret = fimc_set_scaler_info(ctx); + if (!ret) { + fimc_hw_set_input_path(ctx); + fimc_hw_set_prescaler(ctx); + fimc_hw_set_mainscaler(ctx); + fimc_hw_set_target_format(ctx); + fimc_hw_set_rotation(ctx); + fimc_hw_set_effect(ctx); + fimc_hw_set_output_path(ctx); + fimc_hw_set_out_dma(ctx); + if (fimc->drv_data->alpha_color) + fimc_hw_set_rgb_alpha(ctx); + clear_bit(ST_CAPT_APPLY_CFG, &fimc->state); + } + spin_unlock_irqrestore(&fimc->slock, flags); + return ret; +} + +/* + * Reinitialize the driver so it is ready to start the streaming again. + * Set fimc->state to indicate stream off and the hardware shut down state. + * If not suspending (@suspend is false), return any buffers to videobuf2. + * Otherwise put any owned buffers onto the pending buffers queue, so they + * can be re-spun when the device is being resumed. Also perform FIMC + * software reset and disable streaming on the whole pipeline if required. + */ +static int fimc_capture_state_cleanup(struct fimc_dev *fimc, bool suspend) +{ + struct fimc_vid_cap *cap = &fimc->vid_cap; + struct fimc_vid_buffer *buf; + unsigned long flags; + bool streaming; + + spin_lock_irqsave(&fimc->slock, flags); + streaming = fimc->state & (1 << ST_CAPT_ISP_STREAM); + + fimc->state &= ~(1 << ST_CAPT_RUN | 1 << ST_CAPT_SHUT | + 1 << ST_CAPT_STREAM | 1 << ST_CAPT_ISP_STREAM); + if (suspend) + fimc->state |= (1 << ST_CAPT_SUSPENDED); + else + fimc->state &= ~(1 << ST_CAPT_PEND | 1 << ST_CAPT_SUSPENDED); + + /* Release unused buffers */ + while (!suspend && !list_empty(&cap->pending_buf_q)) { + buf = fimc_pending_queue_pop(cap); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + /* If suspending put unused buffers onto pending queue */ + while (!list_empty(&cap->active_buf_q)) { + buf = fimc_active_queue_pop(cap); + if (suspend) + fimc_pending_queue_add(cap, buf); + else + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + + fimc_hw_reset(fimc); + cap->buf_index = 0; + + spin_unlock_irqrestore(&fimc->slock, flags); + + if (streaming) + return fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 0); + else + return 0; +} + +static int fimc_stop_capture(struct fimc_dev *fimc, bool suspend) +{ + unsigned long flags; + + if (!fimc_capture_active(fimc)) + return 0; + + spin_lock_irqsave(&fimc->slock, flags); + set_bit(ST_CAPT_SHUT, &fimc->state); + fimc_deactivate_capture(fimc); + spin_unlock_irqrestore(&fimc->slock, flags); + + wait_event_timeout(fimc->irq_queue, + !test_bit(ST_CAPT_SHUT, &fimc->state), + (2*HZ/10)); /* 200 ms */ + + return fimc_capture_state_cleanup(fimc, suspend); +} + +/** + * fimc_capture_config_update - apply the camera interface configuration + * + * To be called from within the interrupt handler with fimc.slock + * spinlock held. It updates the camera pixel crop, rotation and + * image flip in H/W. + */ +static int fimc_capture_config_update(struct fimc_ctx *ctx) +{ + struct fimc_dev *fimc = ctx->fimc_dev; + int ret; + + fimc_hw_set_camera_offset(fimc, &ctx->s_frame); + + ret = fimc_set_scaler_info(ctx); + if (ret) + return ret; + + fimc_hw_set_prescaler(ctx); + fimc_hw_set_mainscaler(ctx); + fimc_hw_set_target_format(ctx); + fimc_hw_set_rotation(ctx); + fimc_hw_set_effect(ctx); + fimc_prepare_dma_offset(ctx, &ctx->d_frame); + fimc_hw_set_out_dma(ctx); + if (fimc->drv_data->alpha_color) + fimc_hw_set_rgb_alpha(ctx); + + clear_bit(ST_CAPT_APPLY_CFG, &fimc->state); + return ret; +} + +void fimc_capture_irq_handler(struct fimc_dev *fimc, int deq_buf) +{ + struct v4l2_subdev *csis = fimc->pipeline.subdevs[IDX_CSIS]; + struct fimc_vid_cap *cap = &fimc->vid_cap; + struct fimc_frame *f = &cap->ctx->d_frame; + struct fimc_vid_buffer *v_buf; + struct timeval *tv; + struct timespec ts; + + if (test_and_clear_bit(ST_CAPT_SHUT, &fimc->state)) { + wake_up(&fimc->irq_queue); + goto done; + } + + if (!list_empty(&cap->active_buf_q) && + test_bit(ST_CAPT_RUN, &fimc->state) && deq_buf) { + ktime_get_real_ts(&ts); + + v_buf = fimc_active_queue_pop(cap); + + tv = &v_buf->vb.v4l2_buf.timestamp; + tv->tv_sec = ts.tv_sec; + tv->tv_usec = ts.tv_nsec / NSEC_PER_USEC; + v_buf->vb.v4l2_buf.sequence = cap->frame_count++; + + vb2_buffer_done(&v_buf->vb, VB2_BUF_STATE_DONE); + } + + if (!list_empty(&cap->pending_buf_q)) { + + v_buf = fimc_pending_queue_pop(cap); + fimc_hw_set_output_addr(fimc, &v_buf->paddr, cap->buf_index); + v_buf->index = cap->buf_index; + + /* Move the buffer to the capture active queue */ + fimc_active_queue_add(cap, v_buf); + + dbg("next frame: %d, done frame: %d", + fimc_hw_get_frame_index(fimc), v_buf->index); + + if (++cap->buf_index >= FIMC_MAX_OUT_BUFS) + cap->buf_index = 0; + } + /* + * Set up a buffer at MIPI-CSIS if current image format + * requires the frame embedded data capture. + */ + if (f->fmt->mdataplanes && !list_empty(&cap->active_buf_q)) { + unsigned int plane = ffs(f->fmt->mdataplanes) - 1; + unsigned int size = f->payload[plane]; + s32 index = fimc_hw_get_frame_index(fimc); + void *vaddr; + + list_for_each_entry(v_buf, &cap->active_buf_q, list) { + if (v_buf->index != index) + continue; + vaddr = vb2_plane_vaddr(&v_buf->vb, plane); + v4l2_subdev_call(csis, video, s_rx_buffer, + vaddr, &size); + break; + } + } + + if (cap->active_buf_cnt == 0) { + if (deq_buf) + clear_bit(ST_CAPT_RUN, &fimc->state); + + if (++cap->buf_index >= FIMC_MAX_OUT_BUFS) + cap->buf_index = 0; + } else { + set_bit(ST_CAPT_RUN, &fimc->state); + } + + if (test_bit(ST_CAPT_APPLY_CFG, &fimc->state)) + fimc_capture_config_update(cap->ctx); +done: + if (cap->active_buf_cnt == 1) { + fimc_deactivate_capture(fimc); + clear_bit(ST_CAPT_STREAM, &fimc->state); + } + + dbg("frame: %d, active_buf_cnt: %d", + fimc_hw_get_frame_index(fimc), cap->active_buf_cnt); +} + + +static int start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct fimc_ctx *ctx = q->drv_priv; + struct fimc_dev *fimc = ctx->fimc_dev; + struct fimc_vid_cap *vid_cap = &fimc->vid_cap; + int min_bufs; + int ret; + + vid_cap->frame_count = 0; + + ret = fimc_capture_hw_init(fimc); + if (ret) { + fimc_capture_state_cleanup(fimc, false); + return ret; + } + + set_bit(ST_CAPT_PEND, &fimc->state); + + min_bufs = fimc->vid_cap.reqbufs_count > 1 ? 2 : 1; + + if (vid_cap->active_buf_cnt >= min_bufs && + !test_and_set_bit(ST_CAPT_STREAM, &fimc->state)) { + fimc_activate_capture(ctx); + + if (!test_and_set_bit(ST_CAPT_ISP_STREAM, &fimc->state)) + return fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 1); + } + + return 0; +} + +static int stop_streaming(struct vb2_queue *q) +{ + struct fimc_ctx *ctx = q->drv_priv; + struct fimc_dev *fimc = ctx->fimc_dev; + + if (!fimc_capture_active(fimc)) + return -EINVAL; + + return fimc_stop_capture(fimc, false); +} + +int fimc_capture_suspend(struct fimc_dev *fimc) +{ + bool suspend = fimc_capture_busy(fimc); + + int ret = fimc_stop_capture(fimc, suspend); + if (ret) + return ret; + return fimc_pipeline_call(fimc, close, &fimc->pipeline); +} + +static void buffer_queue(struct vb2_buffer *vb); + +int fimc_capture_resume(struct fimc_dev *fimc) +{ + struct fimc_vid_cap *vid_cap = &fimc->vid_cap; + struct fimc_vid_buffer *buf; + int i; + + if (!test_and_clear_bit(ST_CAPT_SUSPENDED, &fimc->state)) + return 0; + + INIT_LIST_HEAD(&fimc->vid_cap.active_buf_q); + vid_cap->buf_index = 0; + fimc_pipeline_call(fimc, open, &fimc->pipeline, + &vid_cap->vfd.entity, false); + fimc_capture_hw_init(fimc); + + clear_bit(ST_CAPT_SUSPENDED, &fimc->state); + + for (i = 0; i < vid_cap->reqbufs_count; i++) { + if (list_empty(&vid_cap->pending_buf_q)) + break; + buf = fimc_pending_queue_pop(vid_cap); + buffer_queue(&buf->vb); + } + return 0; + +} + +static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *pfmt, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *allocators[]) +{ + const struct v4l2_pix_format_mplane *pixm = NULL; + struct fimc_ctx *ctx = vq->drv_priv; + struct fimc_frame *frame = &ctx->d_frame; + struct fimc_fmt *fmt = frame->fmt; + unsigned long wh; + int i; + + if (pfmt) { + pixm = &pfmt->fmt.pix_mp; + fmt = fimc_find_format(&pixm->pixelformat, NULL, + FMT_FLAGS_CAM | FMT_FLAGS_M2M, -1); + wh = pixm->width * pixm->height; + } else { + wh = frame->f_width * frame->f_height; + } + + if (fmt == NULL) + return -EINVAL; + + *num_planes = fmt->memplanes; + + for (i = 0; i < fmt->memplanes; i++) { + unsigned int size = (wh * fmt->depth[i]) / 8; + if (pixm) + sizes[i] = max(size, pixm->plane_fmt[i].sizeimage); + else if (fimc_fmt_is_user_defined(fmt->color)) + sizes[i] = frame->payload[i]; + else + sizes[i] = max_t(u32, size, frame->payload[i]); + + allocators[i] = ctx->fimc_dev->alloc_ctx; + } + + return 0; +} + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_queue *vq = vb->vb2_queue; + struct fimc_ctx *ctx = vq->drv_priv; + int i; + + if (ctx->d_frame.fmt == NULL) + return -EINVAL; + + for (i = 0; i < ctx->d_frame.fmt->memplanes; i++) { + unsigned long size = ctx->d_frame.payload[i]; + + if (vb2_plane_size(vb, i) < size) { + v4l2_err(&ctx->fimc_dev->vid_cap.vfd, + "User buffer too small (%ld < %ld)\n", + vb2_plane_size(vb, i), size); + return -EINVAL; + } + vb2_set_plane_payload(vb, i, size); + } + + return 0; +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + struct fimc_vid_buffer *buf + = container_of(vb, struct fimc_vid_buffer, vb); + struct fimc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct fimc_dev *fimc = ctx->fimc_dev; + struct fimc_vid_cap *vid_cap = &fimc->vid_cap; + unsigned long flags; + int min_bufs; + + spin_lock_irqsave(&fimc->slock, flags); + fimc_prepare_addr(ctx, &buf->vb, &ctx->d_frame, &buf->paddr); + + if (!test_bit(ST_CAPT_SUSPENDED, &fimc->state) && + !test_bit(ST_CAPT_STREAM, &fimc->state) && + vid_cap->active_buf_cnt < FIMC_MAX_OUT_BUFS) { + /* Setup the buffer directly for processing. */ + int buf_id = (vid_cap->reqbufs_count == 1) ? -1 : + vid_cap->buf_index; + + fimc_hw_set_output_addr(fimc, &buf->paddr, buf_id); + buf->index = vid_cap->buf_index; + fimc_active_queue_add(vid_cap, buf); + + if (++vid_cap->buf_index >= FIMC_MAX_OUT_BUFS) + vid_cap->buf_index = 0; + } else { + fimc_pending_queue_add(vid_cap, buf); + } + + min_bufs = vid_cap->reqbufs_count > 1 ? 2 : 1; + + + if (vb2_is_streaming(&vid_cap->vbq) && + vid_cap->active_buf_cnt >= min_bufs && + !test_and_set_bit(ST_CAPT_STREAM, &fimc->state)) { + int ret; + + fimc_activate_capture(ctx); + spin_unlock_irqrestore(&fimc->slock, flags); + + if (test_and_set_bit(ST_CAPT_ISP_STREAM, &fimc->state)) + return; + + ret = fimc_pipeline_call(fimc, set_stream, &fimc->pipeline, 1); + if (ret < 0) + v4l2_err(&vid_cap->vfd, "stream on failed: %d\n", ret); + return; + } + spin_unlock_irqrestore(&fimc->slock, flags); +} + +static struct vb2_ops fimc_capture_qops = { + .queue_setup = queue_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, +}; + +/** + * fimc_capture_ctrls_create - initialize the control handler + * Initialize the capture video node control handler and fill it + * with the FIMC controls. Inherit any sensor's controls if the + * 'user_subdev_api' flag is false (default behaviour). + * This function need to be called with the graph mutex held. + */ +int fimc_capture_ctrls_create(struct fimc_dev *fimc) +{ + struct fimc_vid_cap *vid_cap = &fimc->vid_cap; + struct v4l2_subdev *sensor = fimc->pipeline.subdevs[IDX_SENSOR]; + int ret; + + if (WARN_ON(vid_cap->ctx == NULL)) + return -ENXIO; + if (vid_cap->ctx->ctrls.ready) + return 0; + + ret = fimc_ctrls_create(vid_cap->ctx); + + if (ret || vid_cap->user_subdev_api || !sensor || + !vid_cap->ctx->ctrls.ready) + return ret; + + return v4l2_ctrl_add_handler(&vid_cap->ctx->ctrls.handler, + sensor->ctrl_handler, NULL); +} + +static int fimc_capture_set_default_format(struct fimc_dev *fimc); + +static int fimc_capture_open(struct file *file) +{ + struct fimc_dev *fimc = video_drvdata(file); + int ret = -EBUSY; + + dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state); + + fimc_md_graph_lock(fimc); + mutex_lock(&fimc->lock); + + if (fimc_m2m_active(fimc)) + goto unlock; + + set_bit(ST_CAPT_BUSY, &fimc->state); + ret = pm_runtime_get_sync(&fimc->pdev->dev); + if (ret < 0) + goto unlock; + + ret = v4l2_fh_open(file); + if (ret) { + pm_runtime_put(&fimc->pdev->dev); + goto unlock; + } + + if (v4l2_fh_is_singular_file(file)) { + ret = fimc_pipeline_call(fimc, open, &fimc->pipeline, + &fimc->vid_cap.vfd.entity, true); + + if (!ret && !fimc->vid_cap.user_subdev_api) + ret = fimc_capture_set_default_format(fimc); + + if (!ret) + ret = fimc_capture_ctrls_create(fimc); + + if (ret < 0) { + clear_bit(ST_CAPT_BUSY, &fimc->state); + pm_runtime_put_sync(&fimc->pdev->dev); + v4l2_fh_release(file); + } else { + fimc->vid_cap.refcnt++; + } + } +unlock: + mutex_unlock(&fimc->lock); + fimc_md_graph_unlock(fimc); + return ret; +} + +static int fimc_capture_release(struct file *file) +{ + struct fimc_dev *fimc = video_drvdata(file); + struct fimc_vid_cap *vc = &fimc->vid_cap; + int ret; + + dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state); + + mutex_lock(&fimc->lock); + + if (v4l2_fh_is_singular_file(file)) { + if (vc->streaming) { + media_entity_pipeline_stop(&vc->vfd.entity); + vc->streaming = false; + } + clear_bit(ST_CAPT_BUSY, &fimc->state); + fimc_stop_capture(fimc, false); + fimc_pipeline_call(fimc, close, &fimc->pipeline); + clear_bit(ST_CAPT_SUSPENDED, &fimc->state); + fimc->vid_cap.refcnt--; + } + + pm_runtime_put(&fimc->pdev->dev); + + if (v4l2_fh_is_singular_file(file)) + fimc_ctrls_delete(fimc->vid_cap.ctx); + + ret = vb2_fop_release(file); + mutex_unlock(&fimc->lock); + + return ret; +} + +static const struct v4l2_file_operations fimc_capture_fops = { + .owner = THIS_MODULE, + .open = fimc_capture_open, + .release = fimc_capture_release, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = vb2_fop_mmap, +}; + +/* + * Format and crop negotiation helpers + */ + +static struct fimc_fmt *fimc_capture_try_format(struct fimc_ctx *ctx, + u32 *width, u32 *height, + u32 *code, u32 *fourcc, int pad) +{ + bool rotation = ctx->rotation == 90 || ctx->rotation == 270; + struct fimc_dev *fimc = ctx->fimc_dev; + const struct fimc_variant *var = fimc->variant; + const struct fimc_pix_limit *pl = var->pix_limit; + struct fimc_frame *dst = &ctx->d_frame; + u32 depth, min_w, max_w, min_h, align_h = 3; + u32 mask = FMT_FLAGS_CAM; + struct fimc_fmt *ffmt; + + /* Conversion from/to JPEG or User Defined format is not supported */ + if (code && ctx->s_frame.fmt && pad == FIMC_SD_PAD_SOURCE && + fimc_fmt_is_user_defined(ctx->s_frame.fmt->color)) + *code = ctx->s_frame.fmt->mbus_code; + + if (fourcc && *fourcc != V4L2_PIX_FMT_JPEG && pad == FIMC_SD_PAD_SOURCE) + mask |= FMT_FLAGS_M2M; + + if (pad == FIMC_SD_PAD_SINK_FIFO) + mask = FMT_FLAGS_WRITEBACK; + + ffmt = fimc_find_format(fourcc, code, mask, 0); + if (WARN_ON(!ffmt)) + return NULL; + + if (code) + *code = ffmt->mbus_code; + if (fourcc) + *fourcc = ffmt->fourcc; + + if (pad != FIMC_SD_PAD_SOURCE) { + max_w = fimc_fmt_is_user_defined(ffmt->color) ? + pl->scaler_dis_w : pl->scaler_en_w; + /* Apply the camera input interface pixel constraints */ + v4l_bound_align_image(width, max_t(u32, *width, 32), max_w, 4, + height, max_t(u32, *height, 32), + FIMC_CAMIF_MAX_HEIGHT, + fimc_fmt_is_user_defined(ffmt->color) ? + 3 : 1, + 0); + return ffmt; + } + /* Can't scale or crop in transparent (JPEG) transfer mode */ + if (fimc_fmt_is_user_defined(ffmt->color)) { + *width = ctx->s_frame.f_width; + *height = ctx->s_frame.f_height; + return ffmt; + } + /* Apply the scaler and the output DMA constraints */ + max_w = rotation ? pl->out_rot_en_w : pl->out_rot_dis_w; + if (ctx->state & FIMC_COMPOSE) { + min_w = dst->offs_h + dst->width; + min_h = dst->offs_v + dst->height; + } else { + min_w = var->min_out_pixsize; + min_h = var->min_out_pixsize; + } + if (var->min_vsize_align == 1 && !rotation) + align_h = fimc_fmt_is_rgb(ffmt->color) ? 0 : 1; + + depth = fimc_get_format_depth(ffmt); + v4l_bound_align_image(width, min_w, max_w, + ffs(var->min_out_pixsize) - 1, + height, min_h, FIMC_CAMIF_MAX_HEIGHT, + align_h, + 64/(ALIGN(depth, 8))); + + dbg("pad%d: code: 0x%x, %dx%d. dst fmt: %dx%d", + pad, code ? *code : 0, *width, *height, + dst->f_width, dst->f_height); + + return ffmt; +} + +static void fimc_capture_try_selection(struct fimc_ctx *ctx, + struct v4l2_rect *r, + int target) +{ + bool rotate = ctx->rotation == 90 || ctx->rotation == 270; + struct fimc_dev *fimc = ctx->fimc_dev; + const struct fimc_variant *var = fimc->variant; + const struct fimc_pix_limit *pl = var->pix_limit; + struct fimc_frame *sink = &ctx->s_frame; + u32 max_w, max_h, min_w = 0, min_h = 0, min_sz; + u32 align_sz = 0, align_h = 4; + u32 max_sc_h, max_sc_v; + + /* In JPEG transparent transfer mode cropping is not supported */ + if (fimc_fmt_is_user_defined(ctx->d_frame.fmt->color)) { + r->width = sink->f_width; + r->height = sink->f_height; + r->left = r->top = 0; + return; + } + if (target == V4L2_SEL_TGT_COMPOSE) { + if (ctx->rotation != 90 && ctx->rotation != 270) + align_h = 1; + max_sc_h = min(SCALER_MAX_HRATIO, 1 << (ffs(sink->width) - 3)); + max_sc_v = min(SCALER_MAX_VRATIO, 1 << (ffs(sink->height) - 1)); + min_sz = var->min_out_pixsize; + } else { + u32 depth = fimc_get_format_depth(sink->fmt); + align_sz = 64/ALIGN(depth, 8); + min_sz = var->min_inp_pixsize; + min_w = min_h = min_sz; + max_sc_h = max_sc_v = 1; + } + /* + * For the compose rectangle the following constraints must be met: + * - it must fit in the sink pad format rectangle (f_width/f_height); + * - maximum downscaling ratio is 64; + * - maximum crop size depends if the rotator is used or not; + * - the sink pad format width/height must be 4 multiple of the + * prescaler ratios determined by sink pad size and source pad crop, + * the prescaler ratio is returned by fimc_get_scaler_factor(). + */ + max_w = min_t(u32, + rotate ? pl->out_rot_en_w : pl->out_rot_dis_w, + rotate ? sink->f_height : sink->f_width); + max_h = min_t(u32, FIMC_CAMIF_MAX_HEIGHT, sink->f_height); + + if (target == V4L2_SEL_TGT_COMPOSE) { + min_w = min_t(u32, max_w, sink->f_width / max_sc_h); + min_h = min_t(u32, max_h, sink->f_height / max_sc_v); + if (rotate) { + swap(max_sc_h, max_sc_v); + swap(min_w, min_h); + } + } + v4l_bound_align_image(&r->width, min_w, max_w, ffs(min_sz) - 1, + &r->height, min_h, max_h, align_h, + align_sz); + /* Adjust left/top if crop/compose rectangle is out of bounds */ + r->left = clamp_t(u32, r->left, 0, sink->f_width - r->width); + r->top = clamp_t(u32, r->top, 0, sink->f_height - r->height); + r->left = round_down(r->left, var->hor_offs_align); + + dbg("target %#x: (%d,%d)/%dx%d, sink fmt: %dx%d", + target, r->left, r->top, r->width, r->height, + sink->f_width, sink->f_height); +} + +/* + * The video node ioctl operations + */ +static int fimc_cap_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct fimc_dev *fimc = video_drvdata(file); + + __fimc_vidioc_querycap(&fimc->pdev->dev, cap, V4L2_CAP_STREAMING | + V4L2_CAP_VIDEO_CAPTURE_MPLANE); + return 0; +} + +static int fimc_cap_enum_fmt_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct fimc_fmt *fmt; + + fmt = fimc_find_format(NULL, NULL, FMT_FLAGS_CAM | FMT_FLAGS_M2M, + f->index); + if (!fmt) + return -EINVAL; + strncpy(f->description, fmt->name, sizeof(f->description) - 1); + f->pixelformat = fmt->fourcc; + if (fmt->fourcc == V4L2_MBUS_FMT_JPEG_1X8) + f->flags |= V4L2_FMT_FLAG_COMPRESSED; + return 0; +} + +static struct media_entity *fimc_pipeline_get_head(struct media_entity *me) +{ + struct media_pad *pad = &me->pads[0]; + + while (!(pad->flags & MEDIA_PAD_FL_SOURCE)) { + pad = media_entity_remote_source(pad); + if (!pad) + break; + me = pad->entity; + pad = &me->pads[0]; + } + + return me; +} + +/** + * fimc_pipeline_try_format - negotiate and/or set formats at pipeline + * elements + * @ctx: FIMC capture context + * @tfmt: media bus format to try/set on subdevs + * @fmt_id: fimc pixel format id corresponding to returned @tfmt (output) + * @set: true to set format on subdevs, false to try only + */ +static int fimc_pipeline_try_format(struct fimc_ctx *ctx, + struct v4l2_mbus_framefmt *tfmt, + struct fimc_fmt **fmt_id, + bool set) +{ + struct fimc_dev *fimc = ctx->fimc_dev; + struct v4l2_subdev *sd = fimc->pipeline.subdevs[IDX_SENSOR]; + struct v4l2_subdev_format sfmt; + struct v4l2_mbus_framefmt *mf = &sfmt.format; + struct media_entity *me; + struct fimc_fmt *ffmt; + struct media_pad *pad; + int ret, i = 1; + u32 fcc; + + if (WARN_ON(!sd || !tfmt)) + return -EINVAL; + + memset(&sfmt, 0, sizeof(sfmt)); + sfmt.format = *tfmt; + sfmt.which = set ? V4L2_SUBDEV_FORMAT_ACTIVE : V4L2_SUBDEV_FORMAT_TRY; + + me = fimc_pipeline_get_head(&sd->entity); + + while (1) { + ffmt = fimc_find_format(NULL, mf->code != 0 ? &mf->code : NULL, + FMT_FLAGS_CAM, i++); + if (ffmt == NULL) { + /* + * Notify user-space if common pixel code for + * host and sensor does not exist. + */ + return -EINVAL; + } + mf->code = tfmt->code = ffmt->mbus_code; + + /* set format on all pipeline subdevs */ + while (me != &fimc->vid_cap.subdev.entity) { + sd = media_entity_to_v4l2_subdev(me); + + sfmt.pad = 0; + ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &sfmt); + if (ret) + return ret; + + if (me->pads[0].flags & MEDIA_PAD_FL_SINK) { + sfmt.pad = me->num_pads - 1; + mf->code = tfmt->code; + ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, + &sfmt); + if (ret) + return ret; + } + + pad = media_entity_remote_source(&me->pads[sfmt.pad]); + if (!pad) + return -EINVAL; + me = pad->entity; + } + + if (mf->code != tfmt->code) + continue; + + fcc = ffmt->fourcc; + tfmt->width = mf->width; + tfmt->height = mf->height; + ffmt = fimc_capture_try_format(ctx, &tfmt->width, &tfmt->height, + NULL, &fcc, FIMC_SD_PAD_SINK_CAM); + ffmt = fimc_capture_try_format(ctx, &tfmt->width, &tfmt->height, + NULL, &fcc, FIMC_SD_PAD_SOURCE); + if (ffmt && ffmt->mbus_code) + mf->code = ffmt->mbus_code; + if (mf->width != tfmt->width || mf->height != tfmt->height) + continue; + tfmt->code = mf->code; + break; + } + + if (fmt_id && ffmt) + *fmt_id = ffmt; + *tfmt = *mf; + + return 0; +} + +/** + * fimc_get_sensor_frame_desc - query the sensor for media bus frame parameters + * @sensor: pointer to the sensor subdev + * @plane_fmt: provides plane sizes corresponding to the frame layout entries + * @try: true to set the frame parameters, false to query only + * + * This function is used by this driver only for compressed/blob data formats. + */ +static int fimc_get_sensor_frame_desc(struct v4l2_subdev *sensor, + struct v4l2_plane_pix_format *plane_fmt, + unsigned int num_planes, bool try) +{ + struct v4l2_mbus_frame_desc fd; + int i, ret; + int pad; + + for (i = 0; i < num_planes; i++) + fd.entry[i].length = plane_fmt[i].sizeimage; + + pad = sensor->entity.num_pads - 1; + if (try) + ret = v4l2_subdev_call(sensor, pad, set_frame_desc, pad, &fd); + else + ret = v4l2_subdev_call(sensor, pad, get_frame_desc, pad, &fd); + + if (ret < 0) + return ret; + + if (num_planes != fd.num_entries) + return -EINVAL; + + for (i = 0; i < num_planes; i++) + plane_fmt[i].sizeimage = fd.entry[i].length; + + if (fd.entry[0].length > FIMC_MAX_JPEG_BUF_SIZE) { + v4l2_err(sensor->v4l2_dev, "Unsupported buffer size: %u\n", + fd.entry[0].length); + + return -EINVAL; + } + + return 0; +} + +static int fimc_cap_g_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct fimc_dev *fimc = video_drvdata(file); + + __fimc_get_format(&fimc->vid_cap.ctx->d_frame, f); + return 0; +} + +static int fimc_cap_try_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp; + struct fimc_dev *fimc = video_drvdata(file); + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct v4l2_mbus_framefmt mf; + struct fimc_fmt *ffmt = NULL; + int ret = 0; + + fimc_md_graph_lock(fimc); + mutex_lock(&fimc->lock); + + if (fimc_jpeg_fourcc(pix->pixelformat)) { + fimc_capture_try_format(ctx, &pix->width, &pix->height, + NULL, &pix->pixelformat, + FIMC_SD_PAD_SINK_CAM); + ctx->s_frame.f_width = pix->width; + ctx->s_frame.f_height = pix->height; + } + ffmt = fimc_capture_try_format(ctx, &pix->width, &pix->height, + NULL, &pix->pixelformat, + FIMC_SD_PAD_SOURCE); + if (!ffmt) { + ret = -EINVAL; + goto unlock; + } + + if (!fimc->vid_cap.user_subdev_api) { + mf.width = pix->width; + mf.height = pix->height; + mf.code = ffmt->mbus_code; + fimc_pipeline_try_format(ctx, &mf, &ffmt, false); + pix->width = mf.width; + pix->height = mf.height; + if (ffmt) + pix->pixelformat = ffmt->fourcc; + } + + fimc_adjust_mplane_format(ffmt, pix->width, pix->height, pix); + + if (ffmt->flags & FMT_FLAGS_COMPRESSED) + fimc_get_sensor_frame_desc(fimc->pipeline.subdevs[IDX_SENSOR], + pix->plane_fmt, ffmt->memplanes, true); +unlock: + mutex_unlock(&fimc->lock); + fimc_md_graph_unlock(fimc); + + return ret; +} + +static void fimc_capture_mark_jpeg_xfer(struct fimc_ctx *ctx, + enum fimc_color_fmt color) +{ + bool jpeg = fimc_fmt_is_user_defined(color); + + ctx->scaler.enabled = !jpeg; + fimc_ctrls_activate(ctx, !jpeg); + + if (jpeg) + set_bit(ST_CAPT_JPEG, &ctx->fimc_dev->state); + else + clear_bit(ST_CAPT_JPEG, &ctx->fimc_dev->state); +} + +static int __fimc_capture_set_format(struct fimc_dev *fimc, + struct v4l2_format *f) +{ + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp; + struct v4l2_mbus_framefmt *mf = &fimc->vid_cap.ci_fmt; + struct fimc_frame *ff = &ctx->d_frame; + struct fimc_fmt *s_fmt = NULL; + int ret, i; + + if (vb2_is_busy(&fimc->vid_cap.vbq)) + return -EBUSY; + + /* Pre-configure format at camera interface input, for JPEG only */ + if (fimc_jpeg_fourcc(pix->pixelformat)) { + fimc_capture_try_format(ctx, &pix->width, &pix->height, + NULL, &pix->pixelformat, + FIMC_SD_PAD_SINK_CAM); + ctx->s_frame.f_width = pix->width; + ctx->s_frame.f_height = pix->height; + } + /* Try the format at the scaler and the DMA output */ + ff->fmt = fimc_capture_try_format(ctx, &pix->width, &pix->height, + NULL, &pix->pixelformat, + FIMC_SD_PAD_SOURCE); + if (!ff->fmt) + return -EINVAL; + + /* Update RGB Alpha control state and value range */ + fimc_alpha_ctrl_update(ctx); + + /* Try to match format at the host and the sensor */ + if (!fimc->vid_cap.user_subdev_api) { + mf->code = ff->fmt->mbus_code; + mf->width = pix->width; + mf->height = pix->height; + ret = fimc_pipeline_try_format(ctx, mf, &s_fmt, true); + if (ret) + return ret; + + pix->width = mf->width; + pix->height = mf->height; + } + + fimc_adjust_mplane_format(ff->fmt, pix->width, pix->height, pix); + + if (ff->fmt->flags & FMT_FLAGS_COMPRESSED) { + ret = fimc_get_sensor_frame_desc(fimc->pipeline.subdevs[IDX_SENSOR], + pix->plane_fmt, ff->fmt->memplanes, + true); + if (ret < 0) + return ret; + } + + for (i = 0; i < ff->fmt->memplanes; i++) { + ff->bytesperline[i] = pix->plane_fmt[i].bytesperline; + ff->payload[i] = pix->plane_fmt[i].sizeimage; + } + + set_frame_bounds(ff, pix->width, pix->height); + /* Reset the composition rectangle if not yet configured */ + if (!(ctx->state & FIMC_COMPOSE)) + set_frame_crop(ff, 0, 0, pix->width, pix->height); + + fimc_capture_mark_jpeg_xfer(ctx, ff->fmt->color); + + /* Reset cropping and set format at the camera interface input */ + if (!fimc->vid_cap.user_subdev_api) { + ctx->s_frame.fmt = s_fmt; + set_frame_bounds(&ctx->s_frame, pix->width, pix->height); + set_frame_crop(&ctx->s_frame, 0, 0, pix->width, pix->height); + } + + return ret; +} + +static int fimc_cap_s_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct fimc_dev *fimc = video_drvdata(file); + int ret; + + fimc_md_graph_lock(fimc); + mutex_lock(&fimc->lock); + /* + * The graph is walked within __fimc_capture_set_format() to set + * the format at subdevs thus the graph mutex needs to be held at + * this point and acquired before the video mutex, to avoid AB-BA + * deadlock when fimc_md_link_notify() is called by other thread. + * Ideally the graph walking and setting format at the whole pipeline + * should be removed from this driver and handled in userspace only. + */ + ret = __fimc_capture_set_format(fimc, f); + + mutex_unlock(&fimc->lock); + fimc_md_graph_unlock(fimc); + return ret; +} + +static int fimc_cap_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct fimc_dev *fimc = video_drvdata(file); + struct v4l2_subdev *sd = fimc->pipeline.subdevs[IDX_SENSOR]; + + if (i->index != 0) + return -EINVAL; + + i->type = V4L2_INPUT_TYPE_CAMERA; + if (sd) + strlcpy(i->name, sd->name, sizeof(i->name)); + return 0; +} + +static int fimc_cap_s_input(struct file *file, void *priv, unsigned int i) +{ + return i == 0 ? i : -EINVAL; +} + +static int fimc_cap_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +/** + * fimc_pipeline_validate - check for formats inconsistencies + * between source and sink pad of each link + * + * Return 0 if all formats match or -EPIPE otherwise. + */ +static int fimc_pipeline_validate(struct fimc_dev *fimc) +{ + struct v4l2_subdev_format sink_fmt, src_fmt; + struct fimc_vid_cap *vc = &fimc->vid_cap; + struct v4l2_subdev *sd = &vc->subdev; + struct media_pad *sink_pad, *src_pad; + int i, ret; + + while (1) { + /* + * Find current entity sink pad and any remote sink pad linked + * to it. We stop if there is no sink pad in current entity or + * it is not linked to any other remote entity. + */ + src_pad = NULL; + + for (i = 0; i < sd->entity.num_pads; i++) { + struct media_pad *p = &sd->entity.pads[i]; + + if (p->flags & MEDIA_PAD_FL_SINK) { + sink_pad = p; + src_pad = media_entity_remote_source(sink_pad); + if (src_pad) + break; + } + } + + if (src_pad == NULL || + media_entity_type(src_pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + /* Don't call FIMC subdev operation to avoid nested locking */ + if (sd == &vc->subdev) { + struct fimc_frame *ff = &vc->ctx->s_frame; + sink_fmt.format.width = ff->f_width; + sink_fmt.format.height = ff->f_height; + sink_fmt.format.code = ff->fmt ? ff->fmt->mbus_code : 0; + } else { + sink_fmt.pad = sink_pad->index; + sink_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &sink_fmt); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + } + + /* Retrieve format at the source pad */ + sd = media_entity_to_v4l2_subdev(src_pad->entity); + src_fmt.pad = src_pad->index; + src_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &src_fmt); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + + if (src_fmt.format.width != sink_fmt.format.width || + src_fmt.format.height != sink_fmt.format.height || + src_fmt.format.code != sink_fmt.format.code) + return -EPIPE; + + if (sd == fimc->pipeline.subdevs[IDX_SENSOR] && + fimc_user_defined_mbus_fmt(src_fmt.format.code)) { + struct v4l2_plane_pix_format plane_fmt[FIMC_MAX_PLANES]; + struct fimc_frame *frame = &vc->ctx->d_frame; + unsigned int i; + + ret = fimc_get_sensor_frame_desc(sd, plane_fmt, + frame->fmt->memplanes, + false); + if (ret < 0) + return -EPIPE; + + for (i = 0; i < frame->fmt->memplanes; i++) + if (frame->payload[i] < plane_fmt[i].sizeimage) + return -EPIPE; + } + } + return 0; +} + +static int fimc_cap_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct fimc_dev *fimc = video_drvdata(file); + struct fimc_pipeline *p = &fimc->pipeline; + struct fimc_vid_cap *vc = &fimc->vid_cap; + struct media_entity *entity = &vc->vfd.entity; + struct fimc_source_info *si = NULL; + struct v4l2_subdev *sd; + int ret; + + if (fimc_capture_active(fimc)) + return -EBUSY; + + ret = media_entity_pipeline_start(entity, p->m_pipeline); + if (ret < 0) + return ret; + + sd = p->subdevs[IDX_SENSOR]; + if (sd) + si = v4l2_get_subdev_hostdata(sd); + + if (si == NULL) { + ret = -EPIPE; + goto err_p_stop; + } + /* + * Save configuration data related to currently attached image + * sensor or other data source, e.g. FIMC-IS. + */ + vc->source_config = *si; + + if (vc->input == GRP_ID_FIMC_IS) + vc->source_config.fimc_bus_type = FIMC_BUS_TYPE_ISP_WRITEBACK; + + if (vc->user_subdev_api) { + ret = fimc_pipeline_validate(fimc); + if (ret < 0) + goto err_p_stop; + } + + ret = vb2_ioctl_streamon(file, priv, type); + if (!ret) { + vc->streaming = true; + return ret; + } + +err_p_stop: + media_entity_pipeline_stop(entity); + return ret; +} + +static int fimc_cap_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct fimc_dev *fimc = video_drvdata(file); + int ret; + + ret = vb2_ioctl_streamoff(file, priv, type); + if (ret < 0) + return ret; + + media_entity_pipeline_stop(&fimc->vid_cap.vfd.entity); + fimc->vid_cap.streaming = false; + return 0; +} + +static int fimc_cap_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct fimc_dev *fimc = video_drvdata(file); + int ret; + + ret = vb2_ioctl_reqbufs(file, priv, reqbufs); + + if (!ret) + fimc->vid_cap.reqbufs_count = reqbufs->count; + + return ret; +} + +static int fimc_cap_g_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct fimc_dev *fimc = video_drvdata(file); + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct fimc_frame *f = &ctx->s_frame; + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return -EINVAL; + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + f = &ctx->d_frame; + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + s->r.left = 0; + s->r.top = 0; + s->r.width = f->o_width; + s->r.height = f->o_height; + return 0; + + case V4L2_SEL_TGT_COMPOSE: + f = &ctx->d_frame; + case V4L2_SEL_TGT_CROP: + s->r.left = f->offs_h; + s->r.top = f->offs_v; + s->r.width = f->width; + s->r.height = f->height; + return 0; + } + + return -EINVAL; +} + +/* Return 1 if rectangle a is enclosed in rectangle b, or 0 otherwise. */ +static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b) +{ + if (a->left < b->left || a->top < b->top) + return 0; + if (a->left + a->width > b->left + b->width) + return 0; + if (a->top + a->height > b->top + b->height) + return 0; + + return 1; +} + +static int fimc_cap_s_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct fimc_dev *fimc = video_drvdata(file); + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct v4l2_rect rect = s->r; + struct fimc_frame *f; + unsigned long flags; + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return -EINVAL; + + if (s->target == V4L2_SEL_TGT_COMPOSE) + f = &ctx->d_frame; + else if (s->target == V4L2_SEL_TGT_CROP) + f = &ctx->s_frame; + else + return -EINVAL; + + fimc_capture_try_selection(ctx, &rect, s->target); + + if (s->flags & V4L2_SEL_FLAG_LE && + !enclosed_rectangle(&rect, &s->r)) + return -ERANGE; + + if (s->flags & V4L2_SEL_FLAG_GE && + !enclosed_rectangle(&s->r, &rect)) + return -ERANGE; + + s->r = rect; + spin_lock_irqsave(&fimc->slock, flags); + set_frame_crop(f, s->r.left, s->r.top, s->r.width, + s->r.height); + spin_unlock_irqrestore(&fimc->slock, flags); + + set_bit(ST_CAPT_APPLY_CFG, &fimc->state); + return 0; +} + +static const struct v4l2_ioctl_ops fimc_capture_ioctl_ops = { + .vidioc_querycap = fimc_cap_querycap, + + .vidioc_enum_fmt_vid_cap_mplane = fimc_cap_enum_fmt_mplane, + .vidioc_try_fmt_vid_cap_mplane = fimc_cap_try_fmt_mplane, + .vidioc_s_fmt_vid_cap_mplane = fimc_cap_s_fmt_mplane, + .vidioc_g_fmt_vid_cap_mplane = fimc_cap_g_fmt_mplane, + + .vidioc_reqbufs = fimc_cap_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + + .vidioc_streamon = fimc_cap_streamon, + .vidioc_streamoff = fimc_cap_streamoff, + + .vidioc_g_selection = fimc_cap_g_selection, + .vidioc_s_selection = fimc_cap_s_selection, + + .vidioc_enum_input = fimc_cap_enum_input, + .vidioc_s_input = fimc_cap_s_input, + .vidioc_g_input = fimc_cap_g_input, +}; + +/* Capture subdev media entity operations */ +static int fimc_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct fimc_dev *fimc = v4l2_get_subdevdata(sd); + + if (media_entity_type(remote->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + return -EINVAL; + + if (WARN_ON(fimc == NULL)) + return 0; + + dbg("%s --> %s, flags: 0x%x. input: 0x%x", + local->entity->name, remote->entity->name, flags, + fimc->vid_cap.input); + + if (flags & MEDIA_LNK_FL_ENABLED) { + if (fimc->vid_cap.input != 0) + return -EBUSY; + fimc->vid_cap.input = sd->grp_id; + return 0; + } + + fimc->vid_cap.input = 0; + return 0; +} + +static const struct media_entity_operations fimc_sd_media_ops = { + .link_setup = fimc_link_setup, +}; + +/** + * fimc_sensor_notify - v4l2_device notification from a sensor subdev + * @sd: pointer to a subdev generating the notification + * @notification: the notification type, must be S5P_FIMC_TX_END_NOTIFY + * @arg: pointer to an u32 type integer that stores the frame payload value + * + * The End Of Frame notification sent by sensor subdev in its still capture + * mode. If there is only a single VSYNC generated by the sensor at the + * beginning of a frame transmission, FIMC does not issue the LastIrq + * (end of frame) interrupt. And this notification is used to complete the + * frame capture and returning a buffer to user-space. Subdev drivers should + * call this notification from their last 'End of frame capture' interrupt. + */ +void fimc_sensor_notify(struct v4l2_subdev *sd, unsigned int notification, + void *arg) +{ + struct fimc_source_info *si; + struct fimc_vid_buffer *buf; + struct fimc_md *fmd; + struct fimc_dev *fimc; + unsigned long flags; + + if (sd == NULL) + return; + + si = v4l2_get_subdev_hostdata(sd); + fmd = entity_to_fimc_mdev(&sd->entity); + + spin_lock_irqsave(&fmd->slock, flags); + + fimc = si ? source_to_sensor_info(si)->host : NULL; + + if (fimc && arg && notification == S5P_FIMC_TX_END_NOTIFY && + test_bit(ST_CAPT_PEND, &fimc->state)) { + unsigned long irq_flags; + spin_lock_irqsave(&fimc->slock, irq_flags); + if (!list_empty(&fimc->vid_cap.active_buf_q)) { + buf = list_entry(fimc->vid_cap.active_buf_q.next, + struct fimc_vid_buffer, list); + vb2_set_plane_payload(&buf->vb, 0, *((u32 *)arg)); + } + fimc_capture_irq_handler(fimc, 1); + fimc_deactivate_capture(fimc); + spin_unlock_irqrestore(&fimc->slock, irq_flags); + } + spin_unlock_irqrestore(&fmd->slock, flags); +} + +static int fimc_subdev_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct fimc_fmt *fmt; + + fmt = fimc_find_format(NULL, NULL, FMT_FLAGS_CAM, code->index); + if (!fmt) + return -EINVAL; + code->code = fmt->mbus_code; + return 0; +} + +static int fimc_subdev_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct fimc_dev *fimc = v4l2_get_subdevdata(sd); + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct fimc_frame *ff = &ctx->s_frame; + struct v4l2_mbus_framefmt *mf; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + fmt->format = *mf; + return 0; + } + + mf = &fmt->format; + mutex_lock(&fimc->lock); + + switch (fmt->pad) { + case FIMC_SD_PAD_SOURCE: + if (!WARN_ON(ff->fmt == NULL)) + mf->code = ff->fmt->mbus_code; + /* Sink pads crop rectangle size */ + mf->width = ff->width; + mf->height = ff->height; + break; + case FIMC_SD_PAD_SINK_FIFO: + *mf = fimc->vid_cap.wb_fmt; + break; + case FIMC_SD_PAD_SINK_CAM: + default: + *mf = fimc->vid_cap.ci_fmt; + break; + } + + mutex_unlock(&fimc->lock); + mf->colorspace = V4L2_COLORSPACE_JPEG; + + return 0; +} + +static int fimc_subdev_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct fimc_dev *fimc = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *mf = &fmt->format; + struct fimc_vid_cap *vc = &fimc->vid_cap; + struct fimc_ctx *ctx = vc->ctx; + struct fimc_frame *ff; + struct fimc_fmt *ffmt; + + dbg("pad%d: code: 0x%x, %dx%d", + fmt->pad, mf->code, mf->width, mf->height); + + if (fmt->pad == FIMC_SD_PAD_SOURCE && vb2_is_busy(&vc->vbq)) + return -EBUSY; + + mutex_lock(&fimc->lock); + ffmt = fimc_capture_try_format(ctx, &mf->width, &mf->height, + &mf->code, NULL, fmt->pad); + mutex_unlock(&fimc->lock); + mf->colorspace = V4L2_COLORSPACE_JPEG; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + *mf = fmt->format; + return 0; + } + /* There must be a bug in the driver if this happens */ + if (WARN_ON(ffmt == NULL)) + return -EINVAL; + + /* Update RGB Alpha control state and value range */ + fimc_alpha_ctrl_update(ctx); + + fimc_capture_mark_jpeg_xfer(ctx, ffmt->color); + if (fmt->pad == FIMC_SD_PAD_SOURCE) { + ff = &ctx->d_frame; + /* Sink pads crop rectangle size */ + mf->width = ctx->s_frame.width; + mf->height = ctx->s_frame.height; + } else { + ff = &ctx->s_frame; + } + + mutex_lock(&fimc->lock); + set_frame_bounds(ff, mf->width, mf->height); + + if (fmt->pad == FIMC_SD_PAD_SINK_FIFO) + vc->wb_fmt = *mf; + else if (fmt->pad == FIMC_SD_PAD_SINK_CAM) + vc->ci_fmt = *mf; + + ff->fmt = ffmt; + + /* Reset the crop rectangle if required. */ + if (!(fmt->pad == FIMC_SD_PAD_SOURCE && (ctx->state & FIMC_COMPOSE))) + set_frame_crop(ff, 0, 0, mf->width, mf->height); + + if (fmt->pad != FIMC_SD_PAD_SOURCE) + ctx->state &= ~FIMC_COMPOSE; + + mutex_unlock(&fimc->lock); + return 0; +} + +static int fimc_subdev_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct fimc_dev *fimc = v4l2_get_subdevdata(sd); + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct fimc_frame *f = &ctx->s_frame; + struct v4l2_rect *r = &sel->r; + struct v4l2_rect *try_sel; + + if (sel->pad == FIMC_SD_PAD_SOURCE) + return -EINVAL; + + mutex_lock(&fimc->lock); + + switch (sel->target) { + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + f = &ctx->d_frame; + case V4L2_SEL_TGT_CROP_BOUNDS: + r->width = f->o_width; + r->height = f->o_height; + r->left = 0; + r->top = 0; + mutex_unlock(&fimc->lock); + return 0; + + case V4L2_SEL_TGT_CROP: + try_sel = v4l2_subdev_get_try_crop(fh, sel->pad); + break; + case V4L2_SEL_TGT_COMPOSE: + try_sel = v4l2_subdev_get_try_compose(fh, sel->pad); + f = &ctx->d_frame; + break; + default: + mutex_unlock(&fimc->lock); + return -EINVAL; + } + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { + sel->r = *try_sel; + } else { + r->left = f->offs_h; + r->top = f->offs_v; + r->width = f->width; + r->height = f->height; + } + + dbg("target %#x: l:%d, t:%d, %dx%d, f_w: %d, f_h: %d", + sel->pad, r->left, r->top, r->width, r->height, + f->f_width, f->f_height); + + mutex_unlock(&fimc->lock); + return 0; +} + +static int fimc_subdev_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct fimc_dev *fimc = v4l2_get_subdevdata(sd); + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct fimc_frame *f = &ctx->s_frame; + struct v4l2_rect *r = &sel->r; + struct v4l2_rect *try_sel; + unsigned long flags; + + if (sel->pad == FIMC_SD_PAD_SOURCE) + return -EINVAL; + + mutex_lock(&fimc->lock); + fimc_capture_try_selection(ctx, r, V4L2_SEL_TGT_CROP); + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + try_sel = v4l2_subdev_get_try_crop(fh, sel->pad); + break; + case V4L2_SEL_TGT_COMPOSE: + try_sel = v4l2_subdev_get_try_compose(fh, sel->pad); + f = &ctx->d_frame; + break; + default: + mutex_unlock(&fimc->lock); + return -EINVAL; + } + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { + *try_sel = sel->r; + } else { + spin_lock_irqsave(&fimc->slock, flags); + set_frame_crop(f, r->left, r->top, r->width, r->height); + set_bit(ST_CAPT_APPLY_CFG, &fimc->state); + if (sel->target == V4L2_SEL_TGT_COMPOSE) + ctx->state |= FIMC_COMPOSE; + spin_unlock_irqrestore(&fimc->slock, flags); + } + + dbg("target %#x: (%d,%d)/%dx%d", sel->target, r->left, r->top, + r->width, r->height); + + mutex_unlock(&fimc->lock); + return 0; +} + +static struct v4l2_subdev_pad_ops fimc_subdev_pad_ops = { + .enum_mbus_code = fimc_subdev_enum_mbus_code, + .get_selection = fimc_subdev_get_selection, + .set_selection = fimc_subdev_set_selection, + .get_fmt = fimc_subdev_get_fmt, + .set_fmt = fimc_subdev_set_fmt, +}; + +static struct v4l2_subdev_ops fimc_subdev_ops = { + .pad = &fimc_subdev_pad_ops, +}; + +/* Set default format at the sensor and host interface */ +static int fimc_capture_set_default_format(struct fimc_dev *fimc) +{ + struct v4l2_format fmt = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, + .fmt.pix_mp = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_YUYV, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + }; + + return __fimc_capture_set_format(fimc, &fmt); +} + +/* fimc->lock must be already initialized */ +static int fimc_register_capture_device(struct fimc_dev *fimc, + struct v4l2_device *v4l2_dev) +{ + struct video_device *vfd = &fimc->vid_cap.vfd; + struct vb2_queue *q = &fimc->vid_cap.vbq; + struct fimc_ctx *ctx; + struct fimc_vid_cap *vid_cap; + int ret = -ENOMEM; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->fimc_dev = fimc; + ctx->in_path = FIMC_IO_CAMERA; + ctx->out_path = FIMC_IO_DMA; + ctx->state = FIMC_CTX_CAP; + ctx->s_frame.fmt = fimc_find_format(NULL, NULL, FMT_FLAGS_CAM, 0); + ctx->d_frame.fmt = ctx->s_frame.fmt; + + memset(vfd, 0, sizeof(*vfd)); + snprintf(vfd->name, sizeof(vfd->name), "fimc.%d.capture", fimc->id); + + vfd->fops = &fimc_capture_fops; + vfd->ioctl_ops = &fimc_capture_ioctl_ops; + vfd->v4l2_dev = v4l2_dev; + vfd->minor = -1; + vfd->release = video_device_release_empty; + vfd->queue = q; + vfd->lock = &fimc->lock; + + video_set_drvdata(vfd, fimc); + vid_cap = &fimc->vid_cap; + vid_cap->active_buf_cnt = 0; + vid_cap->reqbufs_count = 0; + vid_cap->ctx = ctx; + + INIT_LIST_HEAD(&vid_cap->pending_buf_q); + INIT_LIST_HEAD(&vid_cap->active_buf_q); + + memset(q, 0, sizeof(*q)); + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + q->drv_priv = ctx; + q->ops = &fimc_capture_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct fimc_vid_buffer); + q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->lock = &fimc->lock; + + ret = vb2_queue_init(q); + if (ret) + goto err_ent; + + vid_cap->vd_pad.flags = MEDIA_PAD_FL_SINK; + ret = media_entity_init(&vfd->entity, 1, &vid_cap->vd_pad, 0); + if (ret) + goto err_ent; + /* + * For proper order of acquiring/releasing the video + * and the graph mutex. + */ + v4l2_disable_ioctl_locking(vfd, VIDIOC_TRY_FMT); + v4l2_disable_ioctl_locking(vfd, VIDIOC_S_FMT); + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1); + if (ret) + goto err_vd; + + v4l2_info(v4l2_dev, "Registered %s as /dev/%s\n", + vfd->name, video_device_node_name(vfd)); + + vfd->ctrl_handler = &ctx->ctrls.handler; + return 0; + +err_vd: + media_entity_cleanup(&vfd->entity); +err_ent: + kfree(ctx); + return ret; +} + +static int fimc_capture_subdev_registered(struct v4l2_subdev *sd) +{ + struct fimc_dev *fimc = v4l2_get_subdevdata(sd); + int ret; + + if (fimc == NULL) + return -ENXIO; + + ret = fimc_register_m2m_device(fimc, sd->v4l2_dev); + if (ret) + return ret; + + fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd); + + ret = fimc_register_capture_device(fimc, sd->v4l2_dev); + if (ret) { + fimc_unregister_m2m_device(fimc); + fimc->pipeline_ops = NULL; + } + + return ret; +} + +static void fimc_capture_subdev_unregistered(struct v4l2_subdev *sd) +{ + struct fimc_dev *fimc = v4l2_get_subdevdata(sd); + + if (fimc == NULL) + return; + + fimc_unregister_m2m_device(fimc); + + if (video_is_registered(&fimc->vid_cap.vfd)) { + video_unregister_device(&fimc->vid_cap.vfd); + media_entity_cleanup(&fimc->vid_cap.vfd.entity); + fimc->pipeline_ops = NULL; + } + kfree(fimc->vid_cap.ctx); + fimc->vid_cap.ctx = NULL; +} + +static const struct v4l2_subdev_internal_ops fimc_capture_sd_internal_ops = { + .registered = fimc_capture_subdev_registered, + .unregistered = fimc_capture_subdev_unregistered, +}; + +int fimc_initialize_capture_subdev(struct fimc_dev *fimc) +{ + struct v4l2_subdev *sd = &fimc->vid_cap.subdev; + int ret; + + v4l2_subdev_init(sd, &fimc_subdev_ops); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + snprintf(sd->name, sizeof(sd->name), "FIMC.%d", fimc->id); + + fimc->vid_cap.sd_pads[FIMC_SD_PAD_SINK_CAM].flags = MEDIA_PAD_FL_SINK; + fimc->vid_cap.sd_pads[FIMC_SD_PAD_SINK_FIFO].flags = MEDIA_PAD_FL_SINK; + fimc->vid_cap.sd_pads[FIMC_SD_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sd->entity, FIMC_SD_PADS_NUM, + fimc->vid_cap.sd_pads, 0); + if (ret) + return ret; + + sd->entity.ops = &fimc_sd_media_ops; + sd->internal_ops = &fimc_capture_sd_internal_ops; + v4l2_set_subdevdata(sd, fimc); + return 0; +} + +void fimc_unregister_capture_subdev(struct fimc_dev *fimc) +{ + struct v4l2_subdev *sd = &fimc->vid_cap.subdev; + + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_set_subdevdata(sd, NULL); +} diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c new file mode 100644 index 00000000..379a5e9d --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-core.c @@ -0,0 +1,1311 @@ +/* + * Samsung S5P/EXYNOS4 SoC series FIMC (CAMIF) driver + * + * Copyright (C) 2010-2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fimc-core.h" +#include "fimc-reg.h" +#include "media-dev.h" + +static char *fimc_clocks[MAX_FIMC_CLOCKS] = { + "sclk_fimc", "fimc" +}; + +static struct fimc_fmt fimc_formats[] = { + { + .name = "RGB565", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = { 16 }, + .color = FIMC_FMT_RGB565, + .memplanes = 1, + .colplanes = 1, + .flags = FMT_FLAGS_M2M, + }, { + .name = "BGR666", + .fourcc = V4L2_PIX_FMT_BGR666, + .depth = { 32 }, + .color = FIMC_FMT_RGB666, + .memplanes = 1, + .colplanes = 1, + .flags = FMT_FLAGS_M2M, + }, { + .name = "ARGB8888, 32 bpp", + .fourcc = V4L2_PIX_FMT_RGB32, + .depth = { 32 }, + .color = FIMC_FMT_RGB888, + .memplanes = 1, + .colplanes = 1, + .flags = FMT_FLAGS_M2M | FMT_HAS_ALPHA, + }, { + .name = "ARGB1555", + .fourcc = V4L2_PIX_FMT_RGB555, + .depth = { 16 }, + .color = FIMC_FMT_RGB555, + .memplanes = 1, + .colplanes = 1, + .flags = FMT_FLAGS_M2M_OUT | FMT_HAS_ALPHA, + }, { + .name = "ARGB4444", + .fourcc = V4L2_PIX_FMT_RGB444, + .depth = { 16 }, + .color = FIMC_FMT_RGB444, + .memplanes = 1, + .colplanes = 1, + .flags = FMT_FLAGS_M2M_OUT | FMT_HAS_ALPHA, + }, { + .name = "YUV 4:4:4", + .mbus_code = V4L2_MBUS_FMT_YUV10_1X30, + .flags = FMT_FLAGS_WRITEBACK, + }, { + .name = "YUV 4:2:2 packed, YCbYCr", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = { 16 }, + .color = FIMC_FMT_YCBYCR422, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, + }, { + .name = "YUV 4:2:2 packed, CbYCrY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = { 16 }, + .color = FIMC_FMT_CBYCRY422, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, + }, { + .name = "YUV 4:2:2 packed, CrYCbY", + .fourcc = V4L2_PIX_FMT_VYUY, + .depth = { 16 }, + .color = FIMC_FMT_CRYCBY422, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_VYUY8_2X8, + .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, + }, { + .name = "YUV 4:2:2 packed, YCrYCb", + .fourcc = V4L2_PIX_FMT_YVYU, + .depth = { 16 }, + .color = FIMC_FMT_YCRYCB422, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_YVYU8_2X8, + .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, + }, { + .name = "YUV 4:2:2 planar, Y/Cb/Cr", + .fourcc = V4L2_PIX_FMT_YUV422P, + .depth = { 12 }, + .color = FIMC_FMT_YCBYCR422, + .memplanes = 1, + .colplanes = 3, + .flags = FMT_FLAGS_M2M, + }, { + .name = "YUV 4:2:2 planar, Y/CbCr", + .fourcc = V4L2_PIX_FMT_NV16, + .depth = { 16 }, + .color = FIMC_FMT_YCBYCR422, + .memplanes = 1, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, + }, { + .name = "YUV 4:2:2 planar, Y/CrCb", + .fourcc = V4L2_PIX_FMT_NV61, + .depth = { 16 }, + .color = FIMC_FMT_YCRYCB422, + .memplanes = 1, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, + }, { + .name = "YUV 4:2:0 planar, YCbCr", + .fourcc = V4L2_PIX_FMT_YUV420, + .depth = { 12 }, + .color = FIMC_FMT_YCBCR420, + .memplanes = 1, + .colplanes = 3, + .flags = FMT_FLAGS_M2M, + }, { + .name = "YUV 4:2:0 planar, Y/CbCr", + .fourcc = V4L2_PIX_FMT_NV12, + .depth = { 12 }, + .color = FIMC_FMT_YCBCR420, + .memplanes = 1, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, + }, { + .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr", + .fourcc = V4L2_PIX_FMT_NV12M, + .color = FIMC_FMT_YCBCR420, + .depth = { 8, 4 }, + .memplanes = 2, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, + }, { + .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr", + .fourcc = V4L2_PIX_FMT_YUV420M, + .color = FIMC_FMT_YCBCR420, + .depth = { 8, 2, 2 }, + .memplanes = 3, + .colplanes = 3, + .flags = FMT_FLAGS_M2M, + }, { + .name = "YUV 4:2:0 non-contig. 2p, tiled", + .fourcc = V4L2_PIX_FMT_NV12MT, + .color = FIMC_FMT_YCBCR420, + .depth = { 8, 4 }, + .memplanes = 2, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, + }, { + .name = "JPEG encoded data", + .fourcc = V4L2_PIX_FMT_JPEG, + .color = FIMC_FMT_JPEG, + .depth = { 8 }, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_JPEG_1X8, + .flags = FMT_FLAGS_CAM | FMT_FLAGS_COMPRESSED, + }, { + .name = "S5C73MX interleaved UYVY/JPEG", + .fourcc = V4L2_PIX_FMT_S5C_UYVY_JPG, + .color = FIMC_FMT_YUYV_JPEG, + .depth = { 8 }, + .memplanes = 2, + .colplanes = 1, + .mdataplanes = 0x2, /* plane 1 holds frame meta data */ + .mbus_code = V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8, + .flags = FMT_FLAGS_CAM | FMT_FLAGS_COMPRESSED, + }, +}; + +struct fimc_fmt *fimc_get_format(unsigned int index) +{ + if (index >= ARRAY_SIZE(fimc_formats)) + return NULL; + + return &fimc_formats[index]; +} + +void __fimc_vidioc_querycap(struct device *dev, struct v4l2_capability *cap, + unsigned int caps) +{ + strlcpy(cap->driver, dev->driver->name, sizeof(cap->driver)); + strlcpy(cap->card, dev->driver->name, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", dev_name(dev)); + cap->device_caps = caps; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; +} + +int fimc_check_scaler_ratio(struct fimc_ctx *ctx, int sw, int sh, + int dw, int dh, int rotation) +{ + if (rotation == 90 || rotation == 270) + swap(dw, dh); + + if (!ctx->scaler.enabled) + return (sw == dw && sh == dh) ? 0 : -EINVAL; + + if ((sw >= SCALER_MAX_HRATIO * dw) || (sh >= SCALER_MAX_VRATIO * dh)) + return -EINVAL; + + return 0; +} + +static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift) +{ + u32 sh = 6; + + if (src >= 64 * tar) + return -EINVAL; + + while (sh--) { + u32 tmp = 1 << sh; + if (src >= tar * tmp) { + *shift = sh, *ratio = tmp; + return 0; + } + } + *shift = 0, *ratio = 1; + return 0; +} + +int fimc_set_scaler_info(struct fimc_ctx *ctx) +{ + const struct fimc_variant *variant = ctx->fimc_dev->variant; + struct device *dev = &ctx->fimc_dev->pdev->dev; + struct fimc_scaler *sc = &ctx->scaler; + struct fimc_frame *s_frame = &ctx->s_frame; + struct fimc_frame *d_frame = &ctx->d_frame; + int tx, ty, sx, sy; + int ret; + + if (ctx->rotation == 90 || ctx->rotation == 270) { + ty = d_frame->width; + tx = d_frame->height; + } else { + tx = d_frame->width; + ty = d_frame->height; + } + if (tx <= 0 || ty <= 0) { + dev_err(dev, "Invalid target size: %dx%d\n", tx, ty); + return -EINVAL; + } + + sx = s_frame->width; + sy = s_frame->height; + if (sx <= 0 || sy <= 0) { + dev_err(dev, "Invalid source size: %dx%d\n", sx, sy); + return -EINVAL; + } + sc->real_width = sx; + sc->real_height = sy; + + ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor); + if (ret) + return ret; + + ret = fimc_get_scaler_factor(sy, ty, &sc->pre_vratio, &sc->vfactor); + if (ret) + return ret; + + sc->pre_dst_width = sx / sc->pre_hratio; + sc->pre_dst_height = sy / sc->pre_vratio; + + if (variant->has_mainscaler_ext) { + sc->main_hratio = (sx << 14) / (tx << sc->hfactor); + sc->main_vratio = (sy << 14) / (ty << sc->vfactor); + } else { + sc->main_hratio = (sx << 8) / (tx << sc->hfactor); + sc->main_vratio = (sy << 8) / (ty << sc->vfactor); + + } + + sc->scaleup_h = (tx >= sx) ? 1 : 0; + sc->scaleup_v = (ty >= sy) ? 1 : 0; + + /* check to see if input and output size/format differ */ + if (s_frame->fmt->color == d_frame->fmt->color + && s_frame->width == d_frame->width + && s_frame->height == d_frame->height) + sc->copy_mode = 1; + else + sc->copy_mode = 0; + + return 0; +} + +static irqreturn_t fimc_irq_handler(int irq, void *priv) +{ + struct fimc_dev *fimc = priv; + struct fimc_ctx *ctx; + + fimc_hw_clear_irq(fimc); + + spin_lock(&fimc->slock); + + if (test_and_clear_bit(ST_M2M_PEND, &fimc->state)) { + if (test_and_clear_bit(ST_M2M_SUSPENDING, &fimc->state)) { + set_bit(ST_M2M_SUSPENDED, &fimc->state); + wake_up(&fimc->irq_queue); + goto out; + } + ctx = v4l2_m2m_get_curr_priv(fimc->m2m.m2m_dev); + if (ctx != NULL) { + spin_unlock(&fimc->slock); + fimc_m2m_job_finish(ctx, VB2_BUF_STATE_DONE); + + if (ctx->state & FIMC_CTX_SHUT) { + ctx->state &= ~FIMC_CTX_SHUT; + wake_up(&fimc->irq_queue); + } + return IRQ_HANDLED; + } + } else if (test_bit(ST_CAPT_PEND, &fimc->state)) { + int last_buf = test_bit(ST_CAPT_JPEG, &fimc->state) && + fimc->vid_cap.reqbufs_count == 1; + fimc_capture_irq_handler(fimc, !last_buf); + } +out: + spin_unlock(&fimc->slock); + return IRQ_HANDLED; +} + +/* The color format (colplanes, memplanes) must be already configured. */ +int fimc_prepare_addr(struct fimc_ctx *ctx, struct vb2_buffer *vb, + struct fimc_frame *frame, struct fimc_addr *paddr) +{ + int ret = 0; + u32 pix_size; + + if (vb == NULL || frame == NULL) + return -EINVAL; + + pix_size = frame->width * frame->height; + + dbg("memplanes= %d, colplanes= %d, pix_size= %d", + frame->fmt->memplanes, frame->fmt->colplanes, pix_size); + + paddr->y = vb2_dma_contig_plane_dma_addr(vb, 0); + + if (frame->fmt->memplanes == 1) { + switch (frame->fmt->colplanes) { + case 1: + paddr->cb = 0; + paddr->cr = 0; + break; + case 2: + /* decompose Y into Y/Cb */ + paddr->cb = (u32)(paddr->y + pix_size); + paddr->cr = 0; + break; + case 3: + paddr->cb = (u32)(paddr->y + pix_size); + /* decompose Y into Y/Cb/Cr */ + if (FIMC_FMT_YCBCR420 == frame->fmt->color) + paddr->cr = (u32)(paddr->cb + + (pix_size >> 2)); + else /* 422 */ + paddr->cr = (u32)(paddr->cb + + (pix_size >> 1)); + break; + default: + return -EINVAL; + } + } else if (!frame->fmt->mdataplanes) { + if (frame->fmt->memplanes >= 2) + paddr->cb = vb2_dma_contig_plane_dma_addr(vb, 1); + + if (frame->fmt->memplanes == 3) + paddr->cr = vb2_dma_contig_plane_dma_addr(vb, 2); + } + + dbg("PHYS_ADDR: y= 0x%X cb= 0x%X cr= 0x%X ret= %d", + paddr->y, paddr->cb, paddr->cr, ret); + + return ret; +} + +/* Set order for 1 and 2 plane YCBCR 4:2:2 formats. */ +void fimc_set_yuv_order(struct fimc_ctx *ctx) +{ + /* The one only mode supported in SoC. */ + ctx->in_order_2p = FIMC_REG_CIOCTRL_ORDER422_2P_LSB_CRCB; + ctx->out_order_2p = FIMC_REG_CIOCTRL_ORDER422_2P_LSB_CRCB; + + /* Set order for 1 plane input formats. */ + switch (ctx->s_frame.fmt->color) { + case FIMC_FMT_YCRYCB422: + ctx->in_order_1p = FIMC_REG_MSCTRL_ORDER422_YCRYCB; + break; + case FIMC_FMT_CBYCRY422: + ctx->in_order_1p = FIMC_REG_MSCTRL_ORDER422_CBYCRY; + break; + case FIMC_FMT_CRYCBY422: + ctx->in_order_1p = FIMC_REG_MSCTRL_ORDER422_CRYCBY; + break; + case FIMC_FMT_YCBYCR422: + default: + ctx->in_order_1p = FIMC_REG_MSCTRL_ORDER422_YCBYCR; + break; + } + dbg("ctx->in_order_1p= %d", ctx->in_order_1p); + + switch (ctx->d_frame.fmt->color) { + case FIMC_FMT_YCRYCB422: + ctx->out_order_1p = FIMC_REG_CIOCTRL_ORDER422_YCRYCB; + break; + case FIMC_FMT_CBYCRY422: + ctx->out_order_1p = FIMC_REG_CIOCTRL_ORDER422_CBYCRY; + break; + case FIMC_FMT_CRYCBY422: + ctx->out_order_1p = FIMC_REG_CIOCTRL_ORDER422_CRYCBY; + break; + case FIMC_FMT_YCBYCR422: + default: + ctx->out_order_1p = FIMC_REG_CIOCTRL_ORDER422_YCBYCR; + break; + } + dbg("ctx->out_order_1p= %d", ctx->out_order_1p); +} + +void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f) +{ + bool pix_hoff = ctx->fimc_dev->drv_data->dma_pix_hoff; + u32 i, depth = 0; + + for (i = 0; i < f->fmt->colplanes; i++) + depth += f->fmt->depth[i]; + + f->dma_offset.y_h = f->offs_h; + if (!pix_hoff) + f->dma_offset.y_h *= (depth >> 3); + + f->dma_offset.y_v = f->offs_v; + + f->dma_offset.cb_h = f->offs_h; + f->dma_offset.cb_v = f->offs_v; + + f->dma_offset.cr_h = f->offs_h; + f->dma_offset.cr_v = f->offs_v; + + if (!pix_hoff) { + if (f->fmt->colplanes == 3) { + f->dma_offset.cb_h >>= 1; + f->dma_offset.cr_h >>= 1; + } + if (f->fmt->color == FIMC_FMT_YCBCR420) { + f->dma_offset.cb_v >>= 1; + f->dma_offset.cr_v >>= 1; + } + } + + dbg("in_offset: color= %d, y_h= %d, y_v= %d", + f->fmt->color, f->dma_offset.y_h, f->dma_offset.y_v); +} + +static int fimc_set_color_effect(struct fimc_ctx *ctx, enum v4l2_colorfx colorfx) +{ + struct fimc_effect *effect = &ctx->effect; + + switch (colorfx) { + case V4L2_COLORFX_NONE: + effect->type = FIMC_REG_CIIMGEFF_FIN_BYPASS; + break; + case V4L2_COLORFX_BW: + effect->type = FIMC_REG_CIIMGEFF_FIN_ARBITRARY; + effect->pat_cb = 128; + effect->pat_cr = 128; + break; + case V4L2_COLORFX_SEPIA: + effect->type = FIMC_REG_CIIMGEFF_FIN_ARBITRARY; + effect->pat_cb = 115; + effect->pat_cr = 145; + break; + case V4L2_COLORFX_NEGATIVE: + effect->type = FIMC_REG_CIIMGEFF_FIN_NEGATIVE; + break; + case V4L2_COLORFX_EMBOSS: + effect->type = FIMC_REG_CIIMGEFF_FIN_EMBOSSING; + break; + case V4L2_COLORFX_ART_FREEZE: + effect->type = FIMC_REG_CIIMGEFF_FIN_ARTFREEZE; + break; + case V4L2_COLORFX_SILHOUETTE: + effect->type = FIMC_REG_CIIMGEFF_FIN_SILHOUETTE; + break; + case V4L2_COLORFX_SET_CBCR: + effect->type = FIMC_REG_CIIMGEFF_FIN_ARBITRARY; + effect->pat_cb = ctx->ctrls.colorfx_cbcr->val >> 8; + effect->pat_cr = ctx->ctrls.colorfx_cbcr->val & 0xff; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* + * V4L2 controls handling + */ +#define ctrl_to_ctx(__ctrl) \ + container_of((__ctrl)->handler, struct fimc_ctx, ctrls.handler) + +static int __fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_ctrl *ctrl) +{ + struct fimc_dev *fimc = ctx->fimc_dev; + const struct fimc_variant *variant = fimc->variant; + int ret = 0; + + if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) + return 0; + + switch (ctrl->id) { + case V4L2_CID_HFLIP: + ctx->hflip = ctrl->val; + break; + + case V4L2_CID_VFLIP: + ctx->vflip = ctrl->val; + break; + + case V4L2_CID_ROTATE: + if (fimc_capture_pending(fimc)) { + ret = fimc_check_scaler_ratio(ctx, ctx->s_frame.width, + ctx->s_frame.height, ctx->d_frame.width, + ctx->d_frame.height, ctrl->val); + if (ret) + return -EINVAL; + } + if ((ctrl->val == 90 || ctrl->val == 270) && + !variant->has_out_rot) + return -EINVAL; + + ctx->rotation = ctrl->val; + break; + + case V4L2_CID_ALPHA_COMPONENT: + ctx->d_frame.alpha = ctrl->val; + break; + + case V4L2_CID_COLORFX: + ret = fimc_set_color_effect(ctx, ctrl->val); + if (ret) + return ret; + break; + } + + ctx->state |= FIMC_PARAMS; + set_bit(ST_CAPT_APPLY_CFG, &fimc->state); + return 0; +} + +static int fimc_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct fimc_ctx *ctx = ctrl_to_ctx(ctrl); + unsigned long flags; + int ret; + + spin_lock_irqsave(&ctx->fimc_dev->slock, flags); + ret = __fimc_s_ctrl(ctx, ctrl); + spin_unlock_irqrestore(&ctx->fimc_dev->slock, flags); + + return ret; +} + +static const struct v4l2_ctrl_ops fimc_ctrl_ops = { + .s_ctrl = fimc_s_ctrl, +}; + +int fimc_ctrls_create(struct fimc_ctx *ctx) +{ + unsigned int max_alpha = fimc_get_alpha_mask(ctx->d_frame.fmt); + struct fimc_ctrls *ctrls = &ctx->ctrls; + struct v4l2_ctrl_handler *handler = &ctrls->handler; + + if (ctx->ctrls.ready) + return 0; + + v4l2_ctrl_handler_init(handler, 6); + + ctrls->rotate = v4l2_ctrl_new_std(handler, &fimc_ctrl_ops, + V4L2_CID_ROTATE, 0, 270, 90, 0); + ctrls->hflip = v4l2_ctrl_new_std(handler, &fimc_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + ctrls->vflip = v4l2_ctrl_new_std(handler, &fimc_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + if (ctx->fimc_dev->drv_data->alpha_color) + ctrls->alpha = v4l2_ctrl_new_std(handler, &fimc_ctrl_ops, + V4L2_CID_ALPHA_COMPONENT, + 0, max_alpha, 1, 0); + else + ctrls->alpha = NULL; + + ctrls->colorfx = v4l2_ctrl_new_std_menu(handler, &fimc_ctrl_ops, + V4L2_CID_COLORFX, V4L2_COLORFX_SET_CBCR, + ~0x983f, V4L2_COLORFX_NONE); + + ctrls->colorfx_cbcr = v4l2_ctrl_new_std(handler, &fimc_ctrl_ops, + V4L2_CID_COLORFX_CBCR, 0, 0xffff, 1, 0); + + ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS; + + if (!handler->error) { + v4l2_ctrl_cluster(2, &ctrls->colorfx); + ctrls->ready = true; + } + + return handler->error; +} + +void fimc_ctrls_delete(struct fimc_ctx *ctx) +{ + struct fimc_ctrls *ctrls = &ctx->ctrls; + + if (ctrls->ready) { + v4l2_ctrl_handler_free(&ctrls->handler); + ctrls->ready = false; + ctrls->alpha = NULL; + } +} + +void fimc_ctrls_activate(struct fimc_ctx *ctx, bool active) +{ + unsigned int has_alpha = ctx->d_frame.fmt->flags & FMT_HAS_ALPHA; + struct fimc_ctrls *ctrls = &ctx->ctrls; + + if (!ctrls->ready) + return; + + mutex_lock(ctrls->handler.lock); + v4l2_ctrl_activate(ctrls->rotate, active); + v4l2_ctrl_activate(ctrls->hflip, active); + v4l2_ctrl_activate(ctrls->vflip, active); + v4l2_ctrl_activate(ctrls->colorfx, active); + if (ctrls->alpha) + v4l2_ctrl_activate(ctrls->alpha, active && has_alpha); + + if (active) { + fimc_set_color_effect(ctx, ctrls->colorfx->cur.val); + ctx->rotation = ctrls->rotate->val; + ctx->hflip = ctrls->hflip->val; + ctx->vflip = ctrls->vflip->val; + } else { + ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS; + ctx->rotation = 0; + ctx->hflip = 0; + ctx->vflip = 0; + } + mutex_unlock(ctrls->handler.lock); +} + +/* Update maximum value of the alpha color control */ +void fimc_alpha_ctrl_update(struct fimc_ctx *ctx) +{ + struct fimc_dev *fimc = ctx->fimc_dev; + struct v4l2_ctrl *ctrl = ctx->ctrls.alpha; + + if (ctrl == NULL || !fimc->drv_data->alpha_color) + return; + + v4l2_ctrl_lock(ctrl); + ctrl->maximum = fimc_get_alpha_mask(ctx->d_frame.fmt); + + if (ctrl->cur.val > ctrl->maximum) + ctrl->cur.val = ctrl->maximum; + + v4l2_ctrl_unlock(ctrl); +} + +void __fimc_get_format(struct fimc_frame *frame, struct v4l2_format *f) +{ + struct v4l2_pix_format_mplane *pixm = &f->fmt.pix_mp; + int i; + + pixm->width = frame->o_width; + pixm->height = frame->o_height; + pixm->field = V4L2_FIELD_NONE; + pixm->pixelformat = frame->fmt->fourcc; + pixm->colorspace = V4L2_COLORSPACE_JPEG; + pixm->num_planes = frame->fmt->memplanes; + + for (i = 0; i < pixm->num_planes; ++i) { + pixm->plane_fmt[i].bytesperline = frame->bytesperline[i]; + pixm->plane_fmt[i].sizeimage = frame->payload[i]; + } +} + +/** + * fimc_adjust_mplane_format - adjust bytesperline/sizeimage for each plane + * @fmt: fimc pixel format description (input) + * @width: requested pixel width + * @height: requested pixel height + * @pix: multi-plane format to adjust + */ +void fimc_adjust_mplane_format(struct fimc_fmt *fmt, u32 width, u32 height, + struct v4l2_pix_format_mplane *pix) +{ + u32 bytesperline = 0; + int i; + + pix->colorspace = V4L2_COLORSPACE_JPEG; + pix->field = V4L2_FIELD_NONE; + pix->num_planes = fmt->memplanes; + pix->pixelformat = fmt->fourcc; + pix->height = height; + pix->width = width; + + for (i = 0; i < pix->num_planes; ++i) { + struct v4l2_plane_pix_format *plane_fmt = &pix->plane_fmt[i]; + u32 bpl = plane_fmt->bytesperline; + + if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width)) + bpl = pix->width; /* Planar */ + + if (fmt->colplanes == 1 && /* Packed */ + (bpl == 0 || ((bpl * 8) / fmt->depth[i]) < pix->width)) + bpl = (pix->width * fmt->depth[0]) / 8; + /* + * Currently bytesperline for each plane is same, except + * V4L2_PIX_FMT_YUV420M format. This calculation may need + * to be changed when other multi-planar formats are added + * to the fimc_formats[] array. + */ + if (i == 0) + bytesperline = bpl; + else if (i == 1 && fmt->memplanes == 3) + bytesperline /= 2; + + plane_fmt->bytesperline = bytesperline; + plane_fmt->sizeimage = max((pix->width * pix->height * + fmt->depth[i]) / 8, plane_fmt->sizeimage); + } +} + +/** + * fimc_find_format - lookup fimc color format by fourcc or media bus format + * @pixelformat: fourcc to match, ignored if null + * @mbus_code: media bus code to match, ignored if null + * @mask: the color flags to match + * @index: offset in the fimc_formats array, ignored if negative + */ +struct fimc_fmt *fimc_find_format(const u32 *pixelformat, const u32 *mbus_code, + unsigned int mask, int index) +{ + struct fimc_fmt *fmt, *def_fmt = NULL; + unsigned int i; + int id = 0; + + if (index >= (int)ARRAY_SIZE(fimc_formats)) + return NULL; + + for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) { + fmt = &fimc_formats[i]; + if (!(fmt->flags & mask)) + continue; + if (pixelformat && fmt->fourcc == *pixelformat) + return fmt; + if (mbus_code && fmt->mbus_code == *mbus_code) + return fmt; + if (index == id) + def_fmt = fmt; + id++; + } + return def_fmt; +} + +static void fimc_clk_put(struct fimc_dev *fimc) +{ + int i; + for (i = 0; i < MAX_FIMC_CLOCKS; i++) { + if (IS_ERR(fimc->clock[i])) + continue; + clk_unprepare(fimc->clock[i]); + clk_put(fimc->clock[i]); + fimc->clock[i] = ERR_PTR(-EINVAL); + } +} + +static int fimc_clk_get(struct fimc_dev *fimc) +{ + int i, ret; + + for (i = 0; i < MAX_FIMC_CLOCKS; i++) + fimc->clock[i] = ERR_PTR(-EINVAL); + + for (i = 0; i < MAX_FIMC_CLOCKS; i++) { + fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clocks[i]); + if (IS_ERR(fimc->clock[i])) { + ret = PTR_ERR(fimc->clock[i]); + goto err; + } + ret = clk_prepare(fimc->clock[i]); + if (ret < 0) { + clk_put(fimc->clock[i]); + fimc->clock[i] = ERR_PTR(-EINVAL); + goto err; + } + } + return 0; +err: + fimc_clk_put(fimc); + dev_err(&fimc->pdev->dev, "failed to get clock: %s\n", + fimc_clocks[i]); + return -ENXIO; +} + +static int fimc_m2m_suspend(struct fimc_dev *fimc) +{ + unsigned long flags; + int timeout; + + spin_lock_irqsave(&fimc->slock, flags); + if (!fimc_m2m_pending(fimc)) { + spin_unlock_irqrestore(&fimc->slock, flags); + return 0; + } + clear_bit(ST_M2M_SUSPENDED, &fimc->state); + set_bit(ST_M2M_SUSPENDING, &fimc->state); + spin_unlock_irqrestore(&fimc->slock, flags); + + timeout = wait_event_timeout(fimc->irq_queue, + test_bit(ST_M2M_SUSPENDED, &fimc->state), + FIMC_SHUTDOWN_TIMEOUT); + + clear_bit(ST_M2M_SUSPENDING, &fimc->state); + return timeout == 0 ? -EAGAIN : 0; +} + +static int fimc_m2m_resume(struct fimc_dev *fimc) +{ + struct fimc_ctx *ctx; + unsigned long flags; + + spin_lock_irqsave(&fimc->slock, flags); + /* Clear for full H/W setup in first run after resume */ + ctx = fimc->m2m.ctx; + fimc->m2m.ctx = NULL; + spin_unlock_irqrestore(&fimc->slock, flags); + + if (test_and_clear_bit(ST_M2M_SUSPENDED, &fimc->state)) + fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); + + return 0; +} + +static const struct of_device_id fimc_of_match[]; + +static int fimc_parse_dt(struct fimc_dev *fimc, u32 *clk_freq) +{ + struct device *dev = &fimc->pdev->dev; + struct device_node *node = dev->of_node; + const struct of_device_id *of_id; + struct fimc_variant *v; + struct fimc_pix_limit *lim; + u32 args[FIMC_PIX_LIMITS_MAX]; + int ret; + + if (of_property_read_bool(node, "samsung,lcd-wb")) + return -ENODEV; + + v = devm_kzalloc(dev, sizeof(*v) + sizeof(*lim), GFP_KERNEL); + if (!v) + return -ENOMEM; + + of_id = of_match_node(fimc_of_match, node); + if (!of_id) + return -EINVAL; + fimc->drv_data = of_id->data; + ret = of_property_read_u32_array(node, "samsung,pix-limits", + args, FIMC_PIX_LIMITS_MAX); + if (ret < 0) + return ret; + + lim = (struct fimc_pix_limit *)&v[1]; + + lim->scaler_en_w = args[0]; + lim->scaler_dis_w = args[1]; + lim->out_rot_en_w = args[2]; + lim->out_rot_dis_w = args[3]; + v->pix_limit = lim; + + ret = of_property_read_u32_array(node, "samsung,min-pix-sizes", + args, 2); + v->min_inp_pixsize = ret ? FIMC_DEF_MIN_SIZE : args[0]; + v->min_out_pixsize = ret ? FIMC_DEF_MIN_SIZE : args[1]; + ret = of_property_read_u32_array(node, "samsung,min-pix-alignment", + args, 2); + v->min_vsize_align = ret ? FIMC_DEF_HEIGHT_ALIGN : args[0]; + v->hor_offs_align = ret ? FIMC_DEF_HOR_OFFS_ALIGN : args[1]; + + ret = of_property_read_u32(node, "samsung,rotators", &args[1]); + v->has_inp_rot = ret ? 1 : args[1] & 0x01; + v->has_out_rot = ret ? 1 : args[1] & 0x10; + v->has_mainscaler_ext = of_property_read_bool(node, + "samsung,mainscaler-ext"); + + v->has_isp_wb = of_property_read_bool(node, "samsung,isp-wb"); + v->has_cam_if = of_property_read_bool(node, "samsung,cam-if"); + of_property_read_u32(node, "clock-frequency", clk_freq); + fimc->id = of_alias_get_id(node, "fimc"); + + fimc->variant = v; + return 0; +} + +static int fimc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + u32 lclk_freq = 0; + struct fimc_dev *fimc; + struct resource *res; + int ret = 0; + + fimc = devm_kzalloc(dev, sizeof(*fimc), GFP_KERNEL); + if (!fimc) + return -ENOMEM; + + fimc->pdev = pdev; + + if (dev->of_node) { + ret = fimc_parse_dt(fimc, &lclk_freq); + if (ret < 0) + return ret; + } else { + fimc->drv_data = fimc_get_drvdata(pdev); + fimc->id = pdev->id; + } + if (!fimc->drv_data || fimc->id >= fimc->drv_data->num_entities || + fimc->id < 0) { + dev_err(dev, "Invalid driver data or device id (%d)\n", + fimc->id); + return -EINVAL; + } + if (!dev->of_node) + fimc->variant = fimc->drv_data->variant[fimc->id]; + + init_waitqueue_head(&fimc->irq_queue); + spin_lock_init(&fimc->slock); + mutex_init(&fimc->lock); + + fimc->sysreg = fimc_get_sysreg_regmap(dev->of_node); + if (IS_ERR(fimc->sysreg)) + return PTR_ERR(fimc->sysreg); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + fimc->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(fimc->regs)) + return PTR_ERR(fimc->regs); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(dev, "Failed to get IRQ resource\n"); + return -ENXIO; + } + + ret = fimc_clk_get(fimc); + if (ret) + return ret; + + if (lclk_freq == 0) + lclk_freq = fimc->drv_data->lclk_frequency; + + ret = clk_set_rate(fimc->clock[CLK_BUS], lclk_freq); + if (ret < 0) + return ret; + + ret = clk_enable(fimc->clock[CLK_BUS]); + if (ret < 0) + return ret; + + ret = devm_request_irq(dev, res->start, fimc_irq_handler, + 0, dev_name(dev), fimc); + if (ret) { + dev_err(dev, "failed to install irq (%d)\n", ret); + goto err_clk; + } + + ret = fimc_initialize_capture_subdev(fimc); + if (ret) + goto err_clk; + + platform_set_drvdata(pdev, fimc); + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto err_sd; + /* Initialize contiguous memory allocator */ + fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev); + if (IS_ERR(fimc->alloc_ctx)) { + ret = PTR_ERR(fimc->alloc_ctx); + goto err_pm; + } + + dev_dbg(dev, "FIMC.%d registered successfully\n", fimc->id); + + pm_runtime_put(dev); + return 0; +err_pm: + pm_runtime_put(dev); +err_sd: + fimc_unregister_capture_subdev(fimc); +err_clk: + clk_disable(fimc->clock[CLK_BUS]); + fimc_clk_put(fimc); + return ret; +} + +static int fimc_runtime_resume(struct device *dev) +{ + struct fimc_dev *fimc = dev_get_drvdata(dev); + + dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state); + + /* Enable clocks and perform basic initalization */ + clk_enable(fimc->clock[CLK_GATE]); + fimc_hw_reset(fimc); + + /* Resume the capture or mem-to-mem device */ + if (fimc_capture_busy(fimc)) + return fimc_capture_resume(fimc); + + return fimc_m2m_resume(fimc); +} + +static int fimc_runtime_suspend(struct device *dev) +{ + struct fimc_dev *fimc = dev_get_drvdata(dev); + int ret = 0; + + if (fimc_capture_busy(fimc)) + ret = fimc_capture_suspend(fimc); + else + ret = fimc_m2m_suspend(fimc); + if (!ret) + clk_disable(fimc->clock[CLK_GATE]); + + dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state); + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int fimc_resume(struct device *dev) +{ + struct fimc_dev *fimc = dev_get_drvdata(dev); + unsigned long flags; + + dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state); + + /* Do not resume if the device was idle before system suspend */ + spin_lock_irqsave(&fimc->slock, flags); + if (!test_and_clear_bit(ST_LPM, &fimc->state) || + (!fimc_m2m_active(fimc) && !fimc_capture_busy(fimc))) { + spin_unlock_irqrestore(&fimc->slock, flags); + return 0; + } + fimc_hw_reset(fimc); + spin_unlock_irqrestore(&fimc->slock, flags); + + if (fimc_capture_busy(fimc)) + return fimc_capture_resume(fimc); + + return fimc_m2m_resume(fimc); +} + +static int fimc_suspend(struct device *dev) +{ + struct fimc_dev *fimc = dev_get_drvdata(dev); + + dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state); + + if (test_and_set_bit(ST_LPM, &fimc->state)) + return 0; + if (fimc_capture_busy(fimc)) + return fimc_capture_suspend(fimc); + + return fimc_m2m_suspend(fimc); +} +#endif /* CONFIG_PM_SLEEP */ + +static int fimc_remove(struct platform_device *pdev) +{ + struct fimc_dev *fimc = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + + fimc_unregister_capture_subdev(fimc); + vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx); + + clk_disable(fimc->clock[CLK_BUS]); + fimc_clk_put(fimc); + + dev_info(&pdev->dev, "driver unloaded\n"); + return 0; +} + +/* Image pixel limits, similar across several FIMC HW revisions. */ +static const struct fimc_pix_limit s5p_pix_limit[4] = { + [0] = { + .scaler_en_w = 3264, + .scaler_dis_w = 8192, + .out_rot_en_w = 1920, + .out_rot_dis_w = 4224, + }, + [1] = { + .scaler_en_w = 4224, + .scaler_dis_w = 8192, + .out_rot_en_w = 1920, + .out_rot_dis_w = 4224, + }, + [2] = { + .scaler_en_w = 1920, + .scaler_dis_w = 8192, + .out_rot_en_w = 1280, + .out_rot_dis_w = 1920, + }, +}; + +static const struct fimc_variant fimc0_variant_s5p = { + .has_inp_rot = 1, + .has_out_rot = 1, + .has_cam_if = 1, + .min_inp_pixsize = 16, + .min_out_pixsize = 16, + .hor_offs_align = 8, + .min_vsize_align = 16, + .pix_limit = &s5p_pix_limit[0], +}; + +static const struct fimc_variant fimc2_variant_s5p = { + .has_cam_if = 1, + .min_inp_pixsize = 16, + .min_out_pixsize = 16, + .hor_offs_align = 8, + .min_vsize_align = 16, + .pix_limit = &s5p_pix_limit[1], +}; + +static const struct fimc_variant fimc0_variant_s5pv210 = { + .has_inp_rot = 1, + .has_out_rot = 1, + .has_cam_if = 1, + .min_inp_pixsize = 16, + .min_out_pixsize = 16, + .hor_offs_align = 8, + .min_vsize_align = 16, + .pix_limit = &s5p_pix_limit[1], +}; + +static const struct fimc_variant fimc1_variant_s5pv210 = { + .has_inp_rot = 1, + .has_out_rot = 1, + .has_cam_if = 1, + .has_mainscaler_ext = 1, + .min_inp_pixsize = 16, + .min_out_pixsize = 16, + .hor_offs_align = 1, + .min_vsize_align = 1, + .pix_limit = &s5p_pix_limit[2], +}; + +static const struct fimc_variant fimc2_variant_s5pv210 = { + .has_cam_if = 1, + .min_inp_pixsize = 16, + .min_out_pixsize = 16, + .hor_offs_align = 8, + .min_vsize_align = 16, + .pix_limit = &s5p_pix_limit[2], +}; + +/* S5PC100 */ +static const struct fimc_drvdata fimc_drvdata_s5p = { + .variant = { + [0] = &fimc0_variant_s5p, + [1] = &fimc0_variant_s5p, + [2] = &fimc2_variant_s5p, + }, + .num_entities = 3, + .lclk_frequency = 133000000UL, + .out_buf_count = 4, +}; + +/* S5PV210, S5PC110 */ +static const struct fimc_drvdata fimc_drvdata_s5pv210 = { + .variant = { + [0] = &fimc0_variant_s5pv210, + [1] = &fimc1_variant_s5pv210, + [2] = &fimc2_variant_s5pv210, + }, + .num_entities = 3, + .lclk_frequency = 166000000UL, + .out_buf_count = 4, + .dma_pix_hoff = 1, +}; + +/* EXYNOS4210, S5PV310, S5PC210 */ +static const struct fimc_drvdata fimc_drvdata_exynos4210 = { + .num_entities = 4, + .lclk_frequency = 166000000UL, + .dma_pix_hoff = 1, + .cistatus2 = 1, + .alpha_color = 1, + .out_buf_count = 32, +}; + +/* EXYNOS4212, EXYNOS4412 */ +static const struct fimc_drvdata fimc_drvdata_exynos4x12 = { + .num_entities = 4, + .lclk_frequency = 166000000UL, + .dma_pix_hoff = 1, + .cistatus2 = 1, + .alpha_color = 1, + .out_buf_count = 32, +}; + +static const struct platform_device_id fimc_driver_ids[] = { + { + .name = "s5p-fimc", + .driver_data = (unsigned long)&fimc_drvdata_s5p, + }, { + .name = "s5pv210-fimc", + .driver_data = (unsigned long)&fimc_drvdata_s5pv210, + }, { + .name = "exynos4-fimc", + .driver_data = (unsigned long)&fimc_drvdata_exynos4210, + }, { + .name = "exynos4x12-fimc", + .driver_data = (unsigned long)&fimc_drvdata_exynos4x12, + }, + { }, +}; + +static const struct of_device_id fimc_of_match[] = { + { + .compatible = "samsung,s5pv210-fimc", + .data = &fimc_drvdata_s5pv210, + }, { + .compatible = "samsung,exynos4210-fimc", + .data = &fimc_drvdata_exynos4210, + }, { + .compatible = "samsung,exynos4212-fimc", + .data = &fimc_drvdata_exynos4x12, + }, + { /* sentinel */ }, +}; + +static const struct dev_pm_ops fimc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fimc_suspend, fimc_resume) + SET_RUNTIME_PM_OPS(fimc_runtime_suspend, fimc_runtime_resume, NULL) +}; + +static struct platform_driver fimc_driver = { + .probe = fimc_probe, + .remove = fimc_remove, + .id_table = fimc_driver_ids, + .driver = { + .of_match_table = fimc_of_match, + .name = FIMC_DRIVER_NAME, + .owner = THIS_MODULE, + .pm = &fimc_pm_ops, + } +}; + +int __init fimc_register_driver(void) +{ + return platform_driver_register(&fimc_driver); +} + +void __exit fimc_unregister_driver(void) +{ + platform_driver_unregister(&fimc_driver); +} diff --git a/drivers/media/platform/exynos4-is/fimc-core.h b/drivers/media/platform/exynos4-is/fimc-core.h new file mode 100644 index 00000000..539a3f71 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-core.h @@ -0,0 +1,731 @@ +/* + * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef FIMC_CORE_H_ +#define FIMC_CORE_H_ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define dbg(fmt, args...) \ + pr_debug("%s:%d: " fmt "\n", __func__, __LINE__, ##args) + +/* Time to wait for next frame VSYNC interrupt while stopping operation. */ +#define FIMC_SHUTDOWN_TIMEOUT ((100*HZ)/1000) +#define MAX_FIMC_CLOCKS 2 +#define FIMC_DRIVER_NAME "exynos4-fimc" +#define FIMC_MAX_DEVS 4 +#define FIMC_MAX_OUT_BUFS 4 +#define SCALER_MAX_HRATIO 64 +#define SCALER_MAX_VRATIO 64 +#define DMA_MIN_SIZE 8 +#define FIMC_CAMIF_MAX_HEIGHT 0x2000 +#define FIMC_MAX_JPEG_BUF_SIZE (10 * SZ_1M) +#define FIMC_MAX_PLANES 3 +#define FIMC_PIX_LIMITS_MAX 4 +#define FIMC_DEF_MIN_SIZE 16 +#define FIMC_DEF_HEIGHT_ALIGN 2 +#define FIMC_DEF_HOR_OFFS_ALIGN 1 + +/* indices to the clocks array */ +enum { + CLK_BUS, + CLK_GATE, +}; + +enum fimc_dev_flags { + ST_LPM, + /* m2m node */ + ST_M2M_RUN, + ST_M2M_PEND, + ST_M2M_SUSPENDING, + ST_M2M_SUSPENDED, + /* capture node */ + ST_CAPT_PEND, + ST_CAPT_RUN, + ST_CAPT_STREAM, + ST_CAPT_ISP_STREAM, + ST_CAPT_SUSPENDED, + ST_CAPT_SHUT, + ST_CAPT_BUSY, + ST_CAPT_APPLY_CFG, + ST_CAPT_JPEG, +}; + +#define fimc_m2m_active(dev) test_bit(ST_M2M_RUN, &(dev)->state) +#define fimc_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state) + +#define fimc_capture_running(dev) test_bit(ST_CAPT_RUN, &(dev)->state) +#define fimc_capture_pending(dev) test_bit(ST_CAPT_PEND, &(dev)->state) +#define fimc_capture_busy(dev) test_bit(ST_CAPT_BUSY, &(dev)->state) + +enum fimc_datapath { + FIMC_IO_NONE, + FIMC_IO_CAMERA, + FIMC_IO_DMA, + FIMC_IO_LCDFIFO, + FIMC_IO_WRITEBACK, + FIMC_IO_ISP, +}; + +enum fimc_color_fmt { + FIMC_FMT_RGB444 = 0x10, + FIMC_FMT_RGB555, + FIMC_FMT_RGB565, + FIMC_FMT_RGB666, + FIMC_FMT_RGB888, + FIMC_FMT_RGB30_LOCAL, + FIMC_FMT_YCBCR420 = 0x20, + FIMC_FMT_YCBYCR422, + FIMC_FMT_YCRYCB422, + FIMC_FMT_CBYCRY422, + FIMC_FMT_CRYCBY422, + FIMC_FMT_YCBCR444_LOCAL, + FIMC_FMT_RAW8 = 0x40, + FIMC_FMT_RAW10, + FIMC_FMT_RAW12, + FIMC_FMT_JPEG = 0x80, + FIMC_FMT_YUYV_JPEG = 0x100, +}; + +#define fimc_fmt_is_user_defined(x) (!!((x) & 0x180)) +#define fimc_fmt_is_rgb(x) (!!((x) & 0x10)) + +#define IS_M2M(__strt) ((__strt) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE || \ + __strt == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + +/* The hardware context state. */ +#define FIMC_PARAMS (1 << 0) +#define FIMC_COMPOSE (1 << 1) +#define FIMC_CTX_M2M (1 << 16) +#define FIMC_CTX_CAP (1 << 17) +#define FIMC_CTX_SHUT (1 << 18) + +/* Image conversion flags */ +#define FIMC_IN_DMA_ACCESS_TILED (1 << 0) +#define FIMC_IN_DMA_ACCESS_LINEAR (0 << 0) +#define FIMC_OUT_DMA_ACCESS_TILED (1 << 1) +#define FIMC_OUT_DMA_ACCESS_LINEAR (0 << 1) +#define FIMC_SCAN_MODE_PROGRESSIVE (0 << 2) +#define FIMC_SCAN_MODE_INTERLACED (1 << 2) +/* + * YCbCr data dynamic range for RGB-YUV color conversion. + * Y/Cb/Cr: (0 ~ 255) */ +#define FIMC_COLOR_RANGE_WIDE (0 << 3) +/* Y (16 ~ 235), Cb/Cr (16 ~ 240) */ +#define FIMC_COLOR_RANGE_NARROW (1 << 3) + +/** + * struct fimc_dma_offset - pixel offset information for DMA + * @y_h: y value horizontal offset + * @y_v: y value vertical offset + * @cb_h: cb value horizontal offset + * @cb_v: cb value vertical offset + * @cr_h: cr value horizontal offset + * @cr_v: cr value vertical offset + */ +struct fimc_dma_offset { + int y_h; + int y_v; + int cb_h; + int cb_v; + int cr_h; + int cr_v; +}; + +/** + * struct fimc_effect - color effect information + * @type: effect type + * @pat_cb: cr value when type is "arbitrary" + * @pat_cr: cr value when type is "arbitrary" + */ +struct fimc_effect { + u32 type; + u8 pat_cb; + u8 pat_cr; +}; + +/** + * struct fimc_scaler - the configuration data for FIMC inetrnal scaler + * @scaleup_h: flag indicating scaling up horizontally + * @scaleup_v: flag indicating scaling up vertically + * @copy_mode: flag indicating transparent DMA transfer (no scaling + * and color format conversion) + * @enabled: flag indicating if the scaler is used + * @hfactor: horizontal shift factor + * @vfactor: vertical shift factor + * @pre_hratio: horizontal ratio of the prescaler + * @pre_vratio: vertical ratio of the prescaler + * @pre_dst_width: the prescaler's destination width + * @pre_dst_height: the prescaler's destination height + * @main_hratio: the main scaler's horizontal ratio + * @main_vratio: the main scaler's vertical ratio + * @real_width: source pixel (width - offset) + * @real_height: source pixel (height - offset) + */ +struct fimc_scaler { + unsigned int scaleup_h:1; + unsigned int scaleup_v:1; + unsigned int copy_mode:1; + unsigned int enabled:1; + u32 hfactor; + u32 vfactor; + u32 pre_hratio; + u32 pre_vratio; + u32 pre_dst_width; + u32 pre_dst_height; + u32 main_hratio; + u32 main_vratio; + u32 real_width; + u32 real_height; +}; + +/** + * struct fimc_addr - the FIMC physical address set for DMA + * @y: luminance plane physical address + * @cb: Cb plane physical address + * @cr: Cr plane physical address + */ +struct fimc_addr { + u32 y; + u32 cb; + u32 cr; +}; + +/** + * struct fimc_vid_buffer - the driver's video buffer + * @vb: v4l videobuf buffer + * @list: linked list structure for buffer queue + * @paddr: precalculated physical address set + * @index: buffer index for the output DMA engine + */ +struct fimc_vid_buffer { + struct vb2_buffer vb; + struct list_head list; + struct fimc_addr paddr; + int index; +}; + +/** + * struct fimc_frame - source/target frame properties + * @f_width: image full width (virtual screen size) + * @f_height: image full height (virtual screen size) + * @o_width: original image width as set by S_FMT + * @o_height: original image height as set by S_FMT + * @offs_h: image horizontal pixel offset + * @offs_v: image vertical pixel offset + * @width: image pixel width + * @height: image pixel weight + * @payload: image size in bytes (w x h x bpp) + * @bytesperline: bytesperline value for each plane + * @paddr: image frame buffer physical addresses + * @dma_offset: DMA offset in bytes + * @fmt: fimc color format pointer + */ +struct fimc_frame { + u32 f_width; + u32 f_height; + u32 o_width; + u32 o_height; + u32 offs_h; + u32 offs_v; + u32 width; + u32 height; + unsigned int payload[VIDEO_MAX_PLANES]; + unsigned int bytesperline[VIDEO_MAX_PLANES]; + struct fimc_addr paddr; + struct fimc_dma_offset dma_offset; + struct fimc_fmt *fmt; + u8 alpha; +}; + +/** + * struct fimc_m2m_device - v4l2 memory-to-memory device data + * @vfd: the video device node for v4l2 m2m mode + * @m2m_dev: v4l2 memory-to-memory device data + * @ctx: hardware context data + * @refcnt: the reference counter + */ +struct fimc_m2m_device { + struct video_device vfd; + struct v4l2_m2m_dev *m2m_dev; + struct fimc_ctx *ctx; + int refcnt; +}; + +#define FIMC_SD_PAD_SINK_CAM 0 +#define FIMC_SD_PAD_SINK_FIFO 1 +#define FIMC_SD_PAD_SOURCE 2 +#define FIMC_SD_PADS_NUM 3 + +/** + * struct fimc_vid_cap - camera capture device information + * @ctx: hardware context data + * @vfd: video device node for camera capture mode + * @subdev: subdev exposing the FIMC processing block + * @vd_pad: fimc video capture node pad + * @sd_pads: fimc video processing block pads + * @ci_fmt: image format at the FIMC camera input (and the scaler output) + * @wb_fmt: image format at the FIMC ISP Writeback input + * @source_config: external image source related configuration structure + * @pending_buf_q: the pending buffer queue head + * @active_buf_q: the queue head of buffers scheduled in hardware + * @vbq: the capture am video buffer queue + * @active_buf_cnt: number of video buffers scheduled in hardware + * @buf_index: index for managing the output DMA buffers + * @frame_count: the frame counter for statistics + * @reqbufs_count: the number of buffers requested in REQBUFS ioctl + * @input_index: input (camera sensor) index + * @refcnt: driver's private reference counter + * @input: capture input type, grp_id of the attached subdev + * @user_subdev_api: true if subdevs are not configured by the host driver + */ +struct fimc_vid_cap { + struct fimc_ctx *ctx; + struct vb2_alloc_ctx *alloc_ctx; + struct video_device vfd; + struct v4l2_subdev subdev; + struct media_pad vd_pad; + struct media_pad sd_pads[FIMC_SD_PADS_NUM]; + struct v4l2_mbus_framefmt ci_fmt; + struct v4l2_mbus_framefmt wb_fmt; + struct fimc_source_info source_config; + struct list_head pending_buf_q; + struct list_head active_buf_q; + struct vb2_queue vbq; + int active_buf_cnt; + int buf_index; + unsigned int frame_count; + unsigned int reqbufs_count; + bool streaming; + int input_index; + int refcnt; + u32 input; + bool user_subdev_api; +}; + +/** + * struct fimc_pix_limit - image pixel size limits in various IP configurations + * + * @scaler_en_w: max input pixel width when the scaler is enabled + * @scaler_dis_w: max input pixel width when the scaler is disabled + * @in_rot_en_h: max input width with the input rotator is on + * @in_rot_dis_w: max input width with the input rotator is off + * @out_rot_en_w: max output width with the output rotator on + * @out_rot_dis_w: max output width with the output rotator off + */ +struct fimc_pix_limit { + u16 scaler_en_w; + u16 scaler_dis_w; + u16 in_rot_en_h; + u16 in_rot_dis_w; + u16 out_rot_en_w; + u16 out_rot_dis_w; +}; + +/** + * struct fimc_variant - FIMC device variant information + * @has_inp_rot: set if has input rotator + * @has_out_rot: set if has output rotator + * @has_mainscaler_ext: 1 if extended mainscaler ratios in CIEXTEN register + * are present in this IP revision + * @has_cam_if: set if this instance has a camera input interface + * @has_isp_wb: set if this instance has ISP writeback input + * @pix_limit: pixel size constraints for the scaler + * @min_inp_pixsize: minimum input pixel size + * @min_out_pixsize: minimum output pixel size + * @hor_offs_align: horizontal pixel offset aligment + * @min_vsize_align: minimum vertical pixel size alignment + */ +struct fimc_variant { + unsigned int has_inp_rot:1; + unsigned int has_out_rot:1; + unsigned int has_mainscaler_ext:1; + unsigned int has_cam_if:1; + unsigned int has_isp_wb:1; + const struct fimc_pix_limit *pix_limit; + u16 min_inp_pixsize; + u16 min_out_pixsize; + u16 hor_offs_align; + u16 min_vsize_align; +}; + +/** + * struct fimc_drvdata - per device type driver data + * @variant: variant information for this device + * @num_entities: number of fimc instances available in a SoC + * @lclk_frequency: local bus clock frequency + * @cistatus2: 1 if the FIMC IPs have CISTATUS2 register + * @dma_pix_hoff: the horizontal DMA offset unit: 1 - pixels, 0 - bytes + * @alpha_color: 1 if alpha color component is supported + * @out_buf_count: maximum number of output DMA buffers supported + */ +struct fimc_drvdata { + const struct fimc_variant *variant[FIMC_MAX_DEVS]; + int num_entities; + unsigned long lclk_frequency; + /* Fields common to all FIMC IP instances */ + u8 cistatus2; + u8 dma_pix_hoff; + u8 alpha_color; + u8 out_buf_count; +}; + +#define fimc_get_drvdata(_pdev) \ + ((struct fimc_drvdata *) platform_get_device_id(_pdev)->driver_data) + +struct fimc_ctx; + +/** + * struct fimc_dev - abstraction for FIMC entity + * @slock: the spinlock protecting this data structure + * @lock: the mutex protecting this data structure + * @pdev: pointer to the FIMC platform device + * @pdata: pointer to the device platform data + * @sysreg: pointer to the SYSREG regmap + * @variant: the IP variant information + * @id: FIMC device index (0..FIMC_MAX_DEVS) + * @clock: clocks required for FIMC operation + * @regs: the mapped hardware registers + * @irq_queue: interrupt handler waitqueue + * @v4l2_dev: root v4l2_device + * @m2m: memory-to-memory V4L2 device information + * @vid_cap: camera capture device information + * @state: flags used to synchronize m2m and capture mode operation + * @alloc_ctx: videobuf2 memory allocator context + * @pipeline: fimc video capture pipeline data structure + */ +struct fimc_dev { + spinlock_t slock; + struct mutex lock; + struct platform_device *pdev; + struct s5p_platform_fimc *pdata; + struct regmap *sysreg; + const struct fimc_variant *variant; + const struct fimc_drvdata *drv_data; + int id; + struct clk *clock[MAX_FIMC_CLOCKS]; + void __iomem *regs; + wait_queue_head_t irq_queue; + struct v4l2_device *v4l2_dev; + struct fimc_m2m_device m2m; + struct fimc_vid_cap vid_cap; + unsigned long state; + struct vb2_alloc_ctx *alloc_ctx; + struct fimc_pipeline pipeline; + const struct fimc_pipeline_ops *pipeline_ops; +}; + +/** + * struct fimc_ctrls - v4l2 controls structure + * @handler: the control handler + * @colorfx: image effect control + * @colorfx_cbcr: Cb/Cr coefficients control + * @rotate: image rotation control + * @hflip: horizontal flip control + * @vflip: vertical flip control + * @alpha: RGB alpha control + * @ready: true if @handler is initialized + */ +struct fimc_ctrls { + struct v4l2_ctrl_handler handler; + struct { + struct v4l2_ctrl *colorfx; + struct v4l2_ctrl *colorfx_cbcr; + }; + struct v4l2_ctrl *rotate; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *alpha; + bool ready; +}; + +/** + * fimc_ctx - the device context data + * @s_frame: source frame properties + * @d_frame: destination frame properties + * @out_order_1p: output 1-plane YCBCR order + * @out_order_2p: output 2-plane YCBCR order + * @in_order_1p input 1-plane YCBCR order + * @in_order_2p: input 2-plane YCBCR order + * @in_path: input mode (DMA or camera) + * @out_path: output mode (DMA or FIFO) + * @scaler: image scaler properties + * @effect: image effect + * @rotation: image clockwise rotation in degrees + * @hflip: indicates image horizontal flip if set + * @vflip: indicates image vertical flip if set + * @flags: additional flags for image conversion + * @state: flags to keep track of user configuration + * @fimc_dev: the FIMC device this context applies to + * @m2m_ctx: memory-to-memory device context + * @fh: v4l2 file handle + * @ctrls: v4l2 controls structure + */ +struct fimc_ctx { + struct fimc_frame s_frame; + struct fimc_frame d_frame; + u32 out_order_1p; + u32 out_order_2p; + u32 in_order_1p; + u32 in_order_2p; + enum fimc_datapath in_path; + enum fimc_datapath out_path; + struct fimc_scaler scaler; + struct fimc_effect effect; + int rotation; + unsigned int hflip:1; + unsigned int vflip:1; + u32 flags; + u32 state; + struct fimc_dev *fimc_dev; + struct v4l2_m2m_ctx *m2m_ctx; + struct v4l2_fh fh; + struct fimc_ctrls ctrls; +}; + +#define fh_to_ctx(__fh) container_of(__fh, struct fimc_ctx, fh) + +static inline void set_frame_bounds(struct fimc_frame *f, u32 width, u32 height) +{ + f->o_width = width; + f->o_height = height; + f->f_width = width; + f->f_height = height; +} + +static inline void set_frame_crop(struct fimc_frame *f, + u32 left, u32 top, u32 width, u32 height) +{ + f->offs_h = left; + f->offs_v = top; + f->width = width; + f->height = height; +} + +static inline u32 fimc_get_format_depth(struct fimc_fmt *ff) +{ + u32 i, depth = 0; + + if (ff != NULL) + for (i = 0; i < ff->colplanes; i++) + depth += ff->depth[i]; + return depth; +} + +static inline bool fimc_capture_active(struct fimc_dev *fimc) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&fimc->slock, flags); + ret = !!(fimc->state & (1 << ST_CAPT_RUN) || + fimc->state & (1 << ST_CAPT_PEND)); + spin_unlock_irqrestore(&fimc->slock, flags); + return ret; +} + +static inline void fimc_ctx_state_set(u32 state, struct fimc_ctx *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->fimc_dev->slock, flags); + ctx->state |= state; + spin_unlock_irqrestore(&ctx->fimc_dev->slock, flags); +} + +static inline bool fimc_ctx_state_is_set(u32 mask, struct fimc_ctx *ctx) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&ctx->fimc_dev->slock, flags); + ret = (ctx->state & mask) == mask; + spin_unlock_irqrestore(&ctx->fimc_dev->slock, flags); + return ret; +} + +static inline int tiled_fmt(struct fimc_fmt *fmt) +{ + return fmt->fourcc == V4L2_PIX_FMT_NV12MT; +} + +static inline bool fimc_jpeg_fourcc(u32 pixelformat) +{ + return (pixelformat == V4L2_PIX_FMT_JPEG || + pixelformat == V4L2_PIX_FMT_S5C_UYVY_JPG); +} + +static inline bool fimc_user_defined_mbus_fmt(u32 code) +{ + return (code == V4L2_MBUS_FMT_JPEG_1X8 || + code == V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8); +} + +/* Return the alpha component bit mask */ +static inline int fimc_get_alpha_mask(struct fimc_fmt *fmt) +{ + switch (fmt->color) { + case FIMC_FMT_RGB444: return 0x0f; + case FIMC_FMT_RGB555: return 0x01; + case FIMC_FMT_RGB888: return 0xff; + default: return 0; + }; +} + +static inline struct fimc_frame *ctx_get_frame(struct fimc_ctx *ctx, + enum v4l2_buf_type type) +{ + struct fimc_frame *frame; + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE == type) { + if (fimc_ctx_state_is_set(FIMC_CTX_M2M, ctx)) + frame = &ctx->s_frame; + else + return ERR_PTR(-EINVAL); + } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE == type) { + frame = &ctx->d_frame; + } else { + v4l2_err(ctx->fimc_dev->v4l2_dev, + "Wrong buffer/video queue type (%d)\n", type); + return ERR_PTR(-EINVAL); + } + + return frame; +} + +/* -----------------------------------------------------*/ +/* fimc-core.c */ +int fimc_vidioc_enum_fmt_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f); +void __fimc_vidioc_querycap(struct device *dev, struct v4l2_capability *cap, + unsigned int caps); +int fimc_ctrls_create(struct fimc_ctx *ctx); +void fimc_ctrls_delete(struct fimc_ctx *ctx); +void fimc_ctrls_activate(struct fimc_ctx *ctx, bool active); +void fimc_alpha_ctrl_update(struct fimc_ctx *ctx); +void __fimc_get_format(struct fimc_frame *frame, struct v4l2_format *f); +void fimc_adjust_mplane_format(struct fimc_fmt *fmt, u32 width, u32 height, + struct v4l2_pix_format_mplane *pix); +struct fimc_fmt *fimc_find_format(const u32 *pixelformat, const u32 *mbus_code, + unsigned int mask, int index); +struct fimc_fmt *fimc_get_format(unsigned int index); + +int fimc_check_scaler_ratio(struct fimc_ctx *ctx, int sw, int sh, + int dw, int dh, int rotation); +int fimc_set_scaler_info(struct fimc_ctx *ctx); +int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags); +int fimc_prepare_addr(struct fimc_ctx *ctx, struct vb2_buffer *vb, + struct fimc_frame *frame, struct fimc_addr *paddr); +void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f); +void fimc_set_yuv_order(struct fimc_ctx *ctx); +void fimc_capture_irq_handler(struct fimc_dev *fimc, int deq_buf); + +int fimc_register_m2m_device(struct fimc_dev *fimc, + struct v4l2_device *v4l2_dev); +void fimc_unregister_m2m_device(struct fimc_dev *fimc); +int fimc_register_driver(void); +void fimc_unregister_driver(void); + +#ifdef CONFIG_MFD_SYSCON +static inline struct regmap * fimc_get_sysreg_regmap(struct device_node *node) +{ + return syscon_regmap_lookup_by_phandle(node, "samsung,sysreg"); +} +#else +#define fimc_get_sysreg_regmap(node) (NULL) +#endif + +/* -----------------------------------------------------*/ +/* fimc-m2m.c */ +void fimc_m2m_job_finish(struct fimc_ctx *ctx, int vb_state); + +/* -----------------------------------------------------*/ +/* fimc-capture.c */ +int fimc_initialize_capture_subdev(struct fimc_dev *fimc); +void fimc_unregister_capture_subdev(struct fimc_dev *fimc); +int fimc_capture_ctrls_create(struct fimc_dev *fimc); +void fimc_sensor_notify(struct v4l2_subdev *sd, unsigned int notification, + void *arg); +int fimc_capture_suspend(struct fimc_dev *fimc); +int fimc_capture_resume(struct fimc_dev *fimc); + +/* + * Buffer list manipulation functions. Must be called with fimc.slock held. + */ + +/** + * fimc_active_queue_add - add buffer to the capture active buffers queue + * @buf: buffer to add to the active buffers list + */ +static inline void fimc_active_queue_add(struct fimc_vid_cap *vid_cap, + struct fimc_vid_buffer *buf) +{ + list_add_tail(&buf->list, &vid_cap->active_buf_q); + vid_cap->active_buf_cnt++; +} + +/** + * fimc_active_queue_pop - pop buffer from the capture active buffers queue + * + * The caller must assure the active_buf_q list is not empty. + */ +static inline struct fimc_vid_buffer *fimc_active_queue_pop( + struct fimc_vid_cap *vid_cap) +{ + struct fimc_vid_buffer *buf; + buf = list_entry(vid_cap->active_buf_q.next, + struct fimc_vid_buffer, list); + list_del(&buf->list); + vid_cap->active_buf_cnt--; + return buf; +} + +/** + * fimc_pending_queue_add - add buffer to the capture pending buffers queue + * @buf: buffer to add to the pending buffers list + */ +static inline void fimc_pending_queue_add(struct fimc_vid_cap *vid_cap, + struct fimc_vid_buffer *buf) +{ + list_add_tail(&buf->list, &vid_cap->pending_buf_q); +} + +/** + * fimc_pending_queue_pop - pop buffer from the capture pending buffers queue + * + * The caller must assure the pending_buf_q list is not empty. + */ +static inline struct fimc_vid_buffer *fimc_pending_queue_pop( + struct fimc_vid_cap *vid_cap) +{ + struct fimc_vid_buffer *buf; + buf = list_entry(vid_cap->pending_buf_q.next, + struct fimc_vid_buffer, list); + list_del(&buf->list); + return buf; +} + +#endif /* FIMC_CORE_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h b/drivers/media/platform/exynos4-is/fimc-is-command.h new file mode 100644 index 00000000..0d1f52e3 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h @@ -0,0 +1,137 @@ +/* + * Samsung Exynos4x12 FIMC-IS (Imaging Subsystem) driver + * + * FIMC-IS command set definitions + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Authors: Younghwan Joo + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef FIMC_IS_CMD_H_ +#define FIMC_IS_CMD_H_ + +#define FIMC_IS_COMMAND_VER 110 /* FIMC-IS command set version 1.10 */ + +/* Enumeration of commands beetween the FIMC-IS and the host processor. */ + +/* HOST to FIMC-IS */ +#define HIC_PREVIEW_STILL 0x0001 +#define HIC_PREVIEW_VIDEO 0x0002 +#define HIC_CAPTURE_STILL 0x0003 +#define HIC_CAPTURE_VIDEO 0x0004 +#define HIC_STREAM_ON 0x0005 +#define HIC_STREAM_OFF 0x0006 +#define HIC_SET_PARAMETER 0x0007 +#define HIC_GET_PARAMETER 0x0008 +#define HIC_SET_TUNE 0x0009 +#define HIC_GET_STATUS 0x000b +/* Sensor part */ +#define HIC_OPEN_SENSOR 0x000c +#define HIC_CLOSE_SENSOR 0x000d +#define HIC_SIMMIAN_INIT 0x000e +#define HIC_SIMMIAN_WRITE 0x000f +#define HIC_SIMMIAN_READ 0x0010 +#define HIC_POWER_DOWN 0x0011 +#define HIC_GET_SET_FILE_ADDR 0x0012 +#define HIC_LOAD_SET_FILE 0x0013 +#define HIC_MSG_CONFIG 0x0014 +#define HIC_MSG_TEST 0x0015 +/* FIMC-IS to HOST */ +#define IHC_GET_SENSOR_NUM 0x1000 +#define IHC_SET_SHOT_MARK 0x1001 +/* parameter1: frame number */ +/* parameter2: confidence level (smile 0~100) */ +/* parameter3: confidence level (blink 0~100) */ +#define IHC_SET_FACE_MARK 0x1002 +/* parameter1: coordinate count */ +/* parameter2: coordinate buffer address */ +#define IHC_FRAME_DONE 0x1003 +/* parameter1: frame start number */ +/* parameter2: frame count */ +#define IHC_AA_DONE 0x1004 +#define IHC_NOT_READY 0x1005 + +#define IH_REPLY_DONE 0x2000 +#define IH_REPLY_NOT_DONE 0x2001 + +enum fimc_is_scenario { + IS_SC_PREVIEW_STILL, + IS_SC_PREVIEW_VIDEO, + IS_SC_CAPTURE_STILL, + IS_SC_CAPTURE_VIDEO, + IS_SC_MAX +}; + +enum fimc_is_sub_scenario { + IS_SC_SUB_DEFAULT, + IS_SC_SUB_PS_VTCALL, + IS_SC_SUB_CS_VTCALL, + IS_SC_SUB_PV_VTCALL, + IS_SC_SUB_CV_VTCALL, +}; + +struct is_common_regs { + u32 hicmd; + u32 hic_sensorid; + u32 hic_param[4]; + u32 reserved1[4]; + + u32 ihcmd; + u32 ihc_sensorid; + u32 ihc_param[4]; + u32 reserved2[4]; + + u32 isp_sensor_id; + u32 isp_param[2]; + u32 reserved3[1]; + + u32 scc_sensor_id; + u32 scc_param[2]; + u32 reserved4[1]; + + u32 dnr_sensor_id; + u32 dnr_param[2]; + u32 reserved5[1]; + + u32 scp_sensor_id; + u32 scp_param[2]; + u32 reserved6[29]; +} __packed; + +struct is_mcuctl_reg { + u32 mcuctl; + u32 bboar; + + u32 intgr0; + u32 intcr0; + u32 intmr0; + u32 intsr0; + u32 intmsr0; + + u32 intgr1; + u32 intcr1; + u32 intmr1; + u32 intsr1; + u32 intmsr1; + + u32 intcr2; + u32 intmr2; + u32 intsr2; + u32 intmsr2; + + u32 gpoctrl; + u32 cpoenctlr; + u32 gpictlr; + + u32 reserved[0xd]; + + struct is_common_regs common; +} __packed; + +#endif /* FIMC_IS_CMD_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-is-errno.c b/drivers/media/platform/exynos4-is/fimc-is-errno.c new file mode 100644 index 00000000..e8519e15 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-errno.c @@ -0,0 +1,272 @@ +/* + * Samsung Exynos4 SoC series FIMC-IS slave interface driver + * + * Error log interface functions + * + * Copyright (C) 2011 - 2013 Samsung Electronics Co., Ltd. + * + * Authors: Younghwan Joo + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "fimc-is-errno.h" + +const char * const fimc_is_param_strerr(unsigned int error) +{ + switch (error) { + case ERROR_COMMON_CMD: + return "ERROR_COMMON_CMD: Invalid Command"; + case ERROR_COMMON_PARAMETER: + return "ERROR_COMMON_PARAMETER: Invalid Parameter"; + case ERROR_COMMON_SETFILE_LOAD: + return "ERROR_COMMON_SETFILE_LOAD: Illegal Setfile Loading"; + case ERROR_COMMON_SETFILE_ADJUST: + return "ERROR_COMMON_SETFILE_ADJUST: Setfile isn't adjusted"; + case ERROR_COMMON_SETFILE_INDEX: + return "ERROR_COMMON_SETFILE_INDEX: Invalid setfile index"; + case ERROR_COMMON_INPUT_PATH: + return "ERROR_COMMON_INPUT_PATH: Input path can be changed in ready state"; + case ERROR_COMMON_INPUT_INIT: + return "ERROR_COMMON_INPUT_INIT: IP can not start if input path is not set"; + case ERROR_COMMON_OUTPUT_PATH: + return "ERROR_COMMON_OUTPUT_PATH: Output path can be changed in ready state (stop)"; + case ERROR_COMMON_OUTPUT_INIT: + return "ERROR_COMMON_OUTPUT_INIT: IP can not start if output path is not set"; + case ERROR_CONTROL_BYPASS: + return "ERROR_CONTROL_BYPASS"; + case ERROR_OTF_INPUT_FORMAT: + return "ERROR_OTF_INPUT_FORMAT: Invalid format (DRC: YUV444, FD: YUV444, 422, 420)"; + case ERROR_OTF_INPUT_WIDTH: + return "ERROR_OTF_INPUT_WIDTH: Invalid width (DRC: 128~8192, FD: 32~8190)"; + case ERROR_OTF_INPUT_HEIGHT: + return "ERROR_OTF_INPUT_HEIGHT: Invalid bit-width (DRC: 8~12bits, FD: 8bit)"; + case ERROR_OTF_INPUT_BIT_WIDTH: + return "ERROR_OTF_INPUT_BIT_WIDTH: Invalid bit-width (DRC: 8~12bits, FD: 8bit)"; + case ERROR_DMA_INPUT_WIDTH: + return "ERROR_DMA_INPUT_WIDTH: Invalid width (DRC: 128~8192, FD: 32~8190)"; + case ERROR_DMA_INPUT_HEIGHT: + return "ERROR_DMA_INPUT_HEIGHT: Invalid height (DRC: 64~8192, FD: 16~8190)"; + case ERROR_DMA_INPUT_FORMAT: + return "ERROR_DMA_INPUT_FORMAT: Invalid format (DRC: YUV444 or YUV422, FD: YUV444,422,420)"; + case ERROR_DMA_INPUT_BIT_WIDTH: + return "ERROR_DMA_INPUT_BIT_WIDTH: Invalid bit-width (DRC: 8~12bits, FD: 8bit)"; + case ERROR_DMA_INPUT_ORDER: + return "ERROR_DMA_INPUT_ORDER: Invalid order(DRC: YYCbCr,YCbYCr,FD:NO,YYCbCr,YCbYCr,CbCr,CrCb)"; + case ERROR_DMA_INPUT_PLANE: + return "ERROR_DMA_INPUT_PLANE: Invalid palne (DRC: 3, FD: 1, 2, 3)"; + case ERROR_OTF_OUTPUT_WIDTH: + return "ERROR_OTF_OUTPUT_WIDTH: Invalid width (DRC: 128~8192)"; + case ERROR_OTF_OUTPUT_HEIGHT: + return "ERROR_OTF_OUTPUT_HEIGHT: Invalid height (DRC: 64~8192)"; + case ERROR_OTF_OUTPUT_FORMAT: + return "ERROR_OTF_OUTPUT_FORMAT: Invalid format (DRC: YUV444)"; + case ERROR_OTF_OUTPUT_BIT_WIDTH: + return "ERROR_OTF_OUTPUT_BIT_WIDTH: Invalid bit-width (DRC: 8~12bits, FD: 8bit)"; + case ERROR_DMA_OUTPUT_WIDTH: + return "ERROR_DMA_OUTPUT_WIDTH"; + case ERROR_DMA_OUTPUT_HEIGHT: + return "ERROR_DMA_OUTPUT_HEIGHT"; + case ERROR_DMA_OUTPUT_FORMAT: + return "ERROR_DMA_OUTPUT_FORMAT"; + case ERROR_DMA_OUTPUT_BIT_WIDTH: + return "ERROR_DMA_OUTPUT_BIT_WIDTH"; + case ERROR_DMA_OUTPUT_PLANE: + return "ERROR_DMA_OUTPUT_PLANE"; + case ERROR_DMA_OUTPUT_ORDER: + return "ERROR_DMA_OUTPUT_ORDER"; + + /* Sensor Error(100~199) */ + case ERROR_SENSOR_I2C_FAIL: + return "ERROR_SENSOR_I2C_FAIL"; + case ERROR_SENSOR_INVALID_FRAMERATE: + return "ERROR_SENSOR_INVALID_FRAMERATE"; + case ERROR_SENSOR_INVALID_EXPOSURETIME: + return "ERROR_SENSOR_INVALID_EXPOSURETIME"; + case ERROR_SENSOR_INVALID_SIZE: + return "ERROR_SENSOR_INVALID_SIZE"; + case ERROR_SENSOR_INVALID_SETTING: + return "ERROR_SENSOR_INVALID_SETTING"; + case ERROR_SENSOR_ACTURATOR_INIT_FAIL: + return "ERROR_SENSOR_ACTURATOR_INIT_FAIL"; + case ERROR_SENSOR_INVALID_AF_POS: + return "ERROR_SENSOR_INVALID_AF_POS"; + case ERROR_SENSOR_UNSUPPORT_FUNC: + return "ERROR_SENSOR_UNSUPPORT_FUNC"; + case ERROR_SENSOR_UNSUPPORT_PERI: + return "ERROR_SENSOR_UNSUPPORT_PERI"; + case ERROR_SENSOR_UNSUPPORT_AF: + return "ERROR_SENSOR_UNSUPPORT_AF"; + + /* ISP Error (200~299) */ + case ERROR_ISP_AF_BUSY: + return "ERROR_ISP_AF_BUSY"; + case ERROR_ISP_AF_INVALID_COMMAND: + return "ERROR_ISP_AF_INVALID_COMMAND"; + case ERROR_ISP_AF_INVALID_MODE: + return "ERROR_ISP_AF_INVALID_MODE"; + + /* DRC Error (300~399) */ + /* FD Error (400~499) */ + case ERROR_FD_CONFIG_MAX_NUMBER_STATE: + return "ERROR_FD_CONFIG_MAX_NUMBER_STATE"; + case ERROR_FD_CONFIG_MAX_NUMBER_INVALID: + return "ERROR_FD_CONFIG_MAX_NUMBER_INVALID"; + case ERROR_FD_CONFIG_YAW_ANGLE_STATE: + return "ERROR_FD_CONFIG_YAW_ANGLE_STATE"; + case ERROR_FD_CONFIG_YAW_ANGLE_INVALID: + return "ERROR_FD_CONFIG_YAW_ANGLE_INVALID\n"; + case ERROR_FD_CONFIG_ROLL_ANGLE_STATE: + return "ERROR_FD_CONFIG_ROLL_ANGLE_STATE"; + case ERROR_FD_CONFIG_ROLL_ANGLE_INVALID: + return "ERROR_FD_CONFIG_ROLL_ANGLE_INVALID"; + case ERROR_FD_CONFIG_SMILE_MODE_INVALID: + return "ERROR_FD_CONFIG_SMILE_MODE_INVALID"; + case ERROR_FD_CONFIG_BLINK_MODE_INVALID: + return "ERROR_FD_CONFIG_BLINK_MODE_INVALID"; + case ERROR_FD_CONFIG_EYES_DETECT_INVALID: + return "ERROR_FD_CONFIG_EYES_DETECT_INVALID"; + case ERROR_FD_CONFIG_MOUTH_DETECT_INVALID: + return "ERROR_FD_CONFIG_MOUTH_DETECT_INVALID"; + case ERROR_FD_CONFIG_ORIENTATION_STATE: + return "ERROR_FD_CONFIG_ORIENTATION_STATE"; + case ERROR_FD_CONFIG_ORIENTATION_INVALID: + return "ERROR_FD_CONFIG_ORIENTATION_INVALID"; + case ERROR_FD_CONFIG_ORIENTATION_VALUE_INVALID: + return "ERROR_FD_CONFIG_ORIENTATION_VALUE_INVALID"; + case ERROR_FD_RESULT: + return "ERROR_FD_RESULT"; + case ERROR_FD_MODE: + return "ERROR_FD_MODE"; + default: + return "Unknown"; + } +} + +const char * const fimc_is_strerr(unsigned int error) +{ + error &= ~IS_ERROR_TIME_OUT_FLAG; + + switch (error) { + /* General */ + case IS_ERROR_INVALID_COMMAND: + return "IS_ERROR_INVALID_COMMAND"; + case IS_ERROR_REQUEST_FAIL: + return "IS_ERROR_REQUEST_FAIL"; + case IS_ERROR_INVALID_SCENARIO: + return "IS_ERROR_INVALID_SCENARIO"; + case IS_ERROR_INVALID_SENSORID: + return "IS_ERROR_INVALID_SENSORID"; + case IS_ERROR_INVALID_MODE_CHANGE: + return "IS_ERROR_INVALID_MODE_CHANGE"; + case IS_ERROR_INVALID_MAGIC_NUMBER: + return "IS_ERROR_INVALID_MAGIC_NUMBER"; + case IS_ERROR_INVALID_SETFILE_HDR: + return "IS_ERROR_INVALID_SETFILE_HDR"; + case IS_ERROR_BUSY: + return "IS_ERROR_BUSY"; + case IS_ERROR_SET_PARAMETER: + return "IS_ERROR_SET_PARAMETER"; + case IS_ERROR_INVALID_PATH: + return "IS_ERROR_INVALID_PATH"; + case IS_ERROR_OPEN_SENSOR_FAIL: + return "IS_ERROR_OPEN_SENSOR_FAIL"; + case IS_ERROR_ENTRY_MSG_THREAD_DOWN: + return "IS_ERROR_ENTRY_MSG_THREAD_DOWN"; + case IS_ERROR_ISP_FRAME_END_NOT_DONE: + return "IS_ERROR_ISP_FRAME_END_NOT_DONE"; + case IS_ERROR_DRC_FRAME_END_NOT_DONE: + return "IS_ERROR_DRC_FRAME_END_NOT_DONE"; + case IS_ERROR_SCALERC_FRAME_END_NOT_DONE: + return "IS_ERROR_SCALERC_FRAME_END_NOT_DONE"; + case IS_ERROR_ODC_FRAME_END_NOT_DONE: + return "IS_ERROR_ODC_FRAME_END_NOT_DONE"; + case IS_ERROR_DIS_FRAME_END_NOT_DONE: + return "IS_ERROR_DIS_FRAME_END_NOT_DONE"; + case IS_ERROR_TDNR_FRAME_END_NOT_DONE: + return "IS_ERROR_TDNR_FRAME_END_NOT_DONE"; + case IS_ERROR_SCALERP_FRAME_END_NOT_DONE: + return "IS_ERROR_SCALERP_FRAME_END_NOT_DONE"; + case IS_ERROR_WAIT_STREAM_OFF_NOT_DONE: + return "IS_ERROR_WAIT_STREAM_OFF_NOT_DONE"; + case IS_ERROR_NO_MSG_IS_RECEIVED: + return "IS_ERROR_NO_MSG_IS_RECEIVED"; + case IS_ERROR_SENSOR_MSG_FAIL: + return "IS_ERROR_SENSOR_MSG_FAIL"; + case IS_ERROR_ISP_MSG_FAIL: + return "IS_ERROR_ISP_MSG_FAIL"; + case IS_ERROR_DRC_MSG_FAIL: + return "IS_ERROR_DRC_MSG_FAIL"; + case IS_ERROR_LHFD_MSG_FAIL: + return "IS_ERROR_LHFD_MSG_FAIL"; + case IS_ERROR_UNKNOWN: + return "IS_ERROR_UNKNOWN"; + + /* Sensor */ + case IS_ERROR_SENSOR_PWRDN_FAIL: + return "IS_ERROR_SENSOR_PWRDN_FAIL"; + + /* ISP */ + case IS_ERROR_ISP_PWRDN_FAIL: + return "IS_ERROR_ISP_PWRDN_FAIL"; + case IS_ERROR_ISP_MULTIPLE_INPUT: + return "IS_ERROR_ISP_MULTIPLE_INPUT"; + case IS_ERROR_ISP_ABSENT_INPUT: + return "IS_ERROR_ISP_ABSENT_INPUT"; + case IS_ERROR_ISP_ABSENT_OUTPUT: + return "IS_ERROR_ISP_ABSENT_OUTPUT"; + case IS_ERROR_ISP_NONADJACENT_OUTPUT: + return "IS_ERROR_ISP_NONADJACENT_OUTPUT"; + case IS_ERROR_ISP_FORMAT_MISMATCH: + return "IS_ERROR_ISP_FORMAT_MISMATCH"; + case IS_ERROR_ISP_WIDTH_MISMATCH: + return "IS_ERROR_ISP_WIDTH_MISMATCH"; + case IS_ERROR_ISP_HEIGHT_MISMATCH: + return "IS_ERROR_ISP_HEIGHT_MISMATCH"; + case IS_ERROR_ISP_BITWIDTH_MISMATCH: + return "IS_ERROR_ISP_BITWIDTH_MISMATCH"; + case IS_ERROR_ISP_FRAME_END_TIME_OUT: + return "IS_ERROR_ISP_FRAME_END_TIME_OUT"; + + /* DRC */ + case IS_ERROR_DRC_PWRDN_FAIL: + return "IS_ERROR_DRC_PWRDN_FAIL"; + case IS_ERROR_DRC_MULTIPLE_INPUT: + return "IS_ERROR_DRC_MULTIPLE_INPUT"; + case IS_ERROR_DRC_ABSENT_INPUT: + return "IS_ERROR_DRC_ABSENT_INPUT"; + case IS_ERROR_DRC_NONADJACENT_INPUT: + return "IS_ERROR_DRC_NONADJACENT_INPUT"; + case IS_ERROR_DRC_ABSENT_OUTPUT: + return "IS_ERROR_DRC_ABSENT_OUTPUT"; + case IS_ERROR_DRC_NONADJACENT_OUTPUT: + return "IS_ERROR_DRC_NONADJACENT_OUTPUT"; + case IS_ERROR_DRC_FORMAT_MISMATCH: + return "IS_ERROR_DRC_FORMAT_MISMATCH"; + case IS_ERROR_DRC_WIDTH_MISMATCH: + return "IS_ERROR_DRC_WIDTH_MISMATCH"; + case IS_ERROR_DRC_HEIGHT_MISMATCH: + return "IS_ERROR_DRC_HEIGHT_MISMATCH"; + case IS_ERROR_DRC_BITWIDTH_MISMATCH: + return "IS_ERROR_DRC_BITWIDTH_MISMATCH"; + case IS_ERROR_DRC_FRAME_END_TIME_OUT: + return "IS_ERROR_DRC_FRAME_END_TIME_OUT"; + + /* FD */ + case IS_ERROR_FD_PWRDN_FAIL: + return "IS_ERROR_FD_PWRDN_FAIL"; + case IS_ERROR_FD_MULTIPLE_INPUT: + return "IS_ERROR_FD_MULTIPLE_INPUT"; + case IS_ERROR_FD_ABSENT_INPUT: + return "IS_ERROR_FD_ABSENT_INPUT"; + case IS_ERROR_FD_NONADJACENT_INPUT: + return "IS_ERROR_FD_NONADJACENT_INPUT"; + case IS_ERROR_LHFD_FRAME_END_TIME_OUT: + return "IS_ERROR_LHFD_FRAME_END_TIME_OUT"; + default: + return "Unknown"; + } +} diff --git a/drivers/media/platform/exynos4-is/fimc-is-errno.h b/drivers/media/platform/exynos4-is/fimc-is-errno.h new file mode 100644 index 00000000..3de6f6da --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-errno.h @@ -0,0 +1,248 @@ +/* + * Samsung Exynos4 SoC series FIMC-IS slave interface driver + * + * FIMC-IS error code definition + * + * Copyright (C) 2011 - 2013 Samsung Electronics Co., Ltd. + * + * Authors: Younghwan Joo + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef FIMC_IS_ERR_H_ +#define FIMC_IS_ERR_H_ + +#define IS_ERROR_VER 011 /* IS ERROR VERSION 0.11 */ + +enum { + IS_ERROR_NONE, + + /* General 1 ~ 99 */ + IS_ERROR_INVALID_COMMAND, + IS_ERROR_REQUEST_FAIL, + IS_ERROR_INVALID_SCENARIO, + IS_ERROR_INVALID_SENSORID, + IS_ERROR_INVALID_MODE_CHANGE, + IS_ERROR_INVALID_MAGIC_NUMBER, + IS_ERROR_INVALID_SETFILE_HDR, + IS_ERROR_BUSY, + IS_ERROR_SET_PARAMETER, + IS_ERROR_INVALID_PATH, + IS_ERROR_OPEN_SENSOR_FAIL, + IS_ERROR_ENTRY_MSG_THREAD_DOWN, + IS_ERROR_ISP_FRAME_END_NOT_DONE, + IS_ERROR_DRC_FRAME_END_NOT_DONE, + IS_ERROR_SCALERC_FRAME_END_NOT_DONE, + IS_ERROR_ODC_FRAME_END_NOT_DONE, + IS_ERROR_DIS_FRAME_END_NOT_DONE, + IS_ERROR_TDNR_FRAME_END_NOT_DONE, + IS_ERROR_SCALERP_FRAME_END_NOT_DONE, + IS_ERROR_WAIT_STREAM_OFF_NOT_DONE, + IS_ERROR_NO_MSG_IS_RECEIVED, + IS_ERROR_SENSOR_MSG_FAIL, + IS_ERROR_ISP_MSG_FAIL, + IS_ERROR_DRC_MSG_FAIL, + IS_ERROR_SCALERC_MSG_FAIL, + IS_ERROR_ODC_MSG_FAIL, + IS_ERROR_DIS_MSG_FAIL, + IS_ERROR_TDNR_MSG_FAIL, + IS_ERROR_SCALERP_MSG_FAIL, + IS_ERROR_LHFD_MSG_FAIL, + IS_ERROR_LHFD_INTERNAL_STOP, + + /* Sensor 100 ~ 199 */ + IS_ERROR_SENSOR_PWRDN_FAIL = 100, + IS_ERROR_SENSOR_STREAM_ON_FAIL, + IS_ERROR_SENSOR_STREAM_OFF_FAIL, + + /* ISP 200 ~ 299 */ + IS_ERROR_ISP_PWRDN_FAIL = 200, + IS_ERROR_ISP_MULTIPLE_INPUT, + IS_ERROR_ISP_ABSENT_INPUT, + IS_ERROR_ISP_ABSENT_OUTPUT, + IS_ERROR_ISP_NONADJACENT_OUTPUT, + IS_ERROR_ISP_FORMAT_MISMATCH, + IS_ERROR_ISP_WIDTH_MISMATCH, + IS_ERROR_ISP_HEIGHT_MISMATCH, + IS_ERROR_ISP_BITWIDTH_MISMATCH, + IS_ERROR_ISP_FRAME_END_TIME_OUT, + + /* DRC 300 ~ 399 */ + IS_ERROR_DRC_PWRDN_FAIL = 300, + IS_ERROR_DRC_MULTIPLE_INPUT, + IS_ERROR_DRC_ABSENT_INPUT, + IS_ERROR_DRC_NONADJACENT_INPUT, + IS_ERROR_DRC_ABSENT_OUTPUT, + IS_ERROR_DRC_NONADJACENT_OUTPUT, + IS_ERROR_DRC_FORMAT_MISMATCH, + IS_ERROR_DRC_WIDTH_MISMATCH, + IS_ERROR_DRC_HEIGHT_MISMATCH, + IS_ERROR_DRC_BITWIDTH_MISMATCH, + IS_ERROR_DRC_FRAME_END_TIME_OUT, + + /* SCALERC 400 ~ 499 */ + IS_ERROR_SCALERC_PWRDN_FAIL = 400, + + /* ODC 500 ~ 599 */ + IS_ERROR_ODC_PWRDN_FAIL = 500, + + /* DIS 600 ~ 699 */ + IS_ERROR_DIS_PWRDN_FAIL = 600, + + /* TDNR 700 ~ 799 */ + IS_ERROR_TDNR_PWRDN_FAIL = 700, + + /* SCALERC 800 ~ 899 */ + IS_ERROR_SCALERP_PWRDN_FAIL = 800, + + /* FD 900 ~ 999 */ + IS_ERROR_FD_PWRDN_FAIL = 900, + IS_ERROR_FD_MULTIPLE_INPUT, + IS_ERROR_FD_ABSENT_INPUT, + IS_ERROR_FD_NONADJACENT_INPUT, + IS_ERROR_LHFD_FRAME_END_TIME_OUT, + + IS_ERROR_UNKNOWN = 1000, +}; + +#define IS_ERROR_TIME_OUT_FLAG 0x80000000 + +/* Set parameter error enum */ +enum fimc_is_error { + /* Common error (0~99) */ + ERROR_COMMON_NONE = 0, + ERROR_COMMON_CMD = 1, /* Invalid command */ + ERROR_COMMON_PARAMETER = 2, /* Invalid parameter */ + /* setfile is not loaded before adjusting */ + ERROR_COMMON_SETFILE_LOAD = 3, + /* setfile is not Adjusted before runnng. */ + ERROR_COMMON_SETFILE_ADJUST = 4, + /* Index of setfile is not valid (0~MAX_SETFILE_NUM-1) */ + ERROR_COMMON_SETFILE_INDEX = 5, + /* Input path can be changed in ready state(stop) */ + ERROR_COMMON_INPUT_PATH = 6, + /* IP can not start if input path is not set */ + ERROR_COMMON_INPUT_INIT = 7, + /* Output path can be changed in ready state (stop) */ + ERROR_COMMON_OUTPUT_PATH = 8, + /* IP can not start if output path is not set */ + ERROR_COMMON_OUTPUT_INIT = 9, + + ERROR_CONTROL_NONE = ERROR_COMMON_NONE, + ERROR_CONTROL_BYPASS = 11, /* Enable or Disable */ + + ERROR_OTF_INPUT_NONE = ERROR_COMMON_NONE, + ERROR_OTF_INPUT_CMD = 21, + /* invalid format (DRC: YUV444, FD: YUV444, 422, 420) */ + ERROR_OTF_INPUT_FORMAT = 22, + /* invalid width (DRC: 128~8192, FD: 32~8190) */ + ERROR_OTF_INPUT_WIDTH = 23, + /* invalid height (DRC: 64~8192, FD: 16~8190) */ + ERROR_OTF_INPUT_HEIGHT = 24, + /* invalid bit-width (DRC: 8~12bits, FD: 8bit) */ + ERROR_OTF_INPUT_BIT_WIDTH = 25, + /* invalid FrameTime for ISP */ + ERROR_OTF_INPUT_USER_FRAMETIIME = 26, + + ERROR_DMA_INPUT_NONE = ERROR_COMMON_NONE, + /* invalid width (DRC: 128~8192, FD: 32~8190) */ + ERROR_DMA_INPUT_WIDTH = 31, + /* invalid height (DRC: 64~8192, FD: 16~8190) */ + ERROR_DMA_INPUT_HEIGHT = 32, + /* invalid format (DRC: YUV444 or YUV422, FD: YUV444, 422, 420) */ + ERROR_DMA_INPUT_FORMAT = 33, + /* invalid bit-width (DRC: 8~12bit, FD: 8bit) */ + ERROR_DMA_INPUT_BIT_WIDTH = 34, + /* invalid order(DRC: YYCbCrorYCbYCr, FD:NO,YYCbCr,YCbYCr,CbCr,CrCb) */ + ERROR_DMA_INPUT_ORDER = 35, + /* invalid palne (DRC: 3, FD: 1, 2, 3) */ + ERROR_DMA_INPUT_PLANE = 36, + + ERROR_OTF_OUTPUT_NONE = ERROR_COMMON_NONE, + /* invalid width (DRC: 128~8192) */ + ERROR_OTF_OUTPUT_WIDTH = 41, + /* invalid height (DRC: 64~8192) */ + ERROR_OTF_OUTPUT_HEIGHT = 42, + /* invalid format (DRC: YUV444) */ + ERROR_OTF_OUTPUT_FORMAT = 43, + /* invalid bit-width (DRC: 8~12bits) */ + ERROR_OTF_OUTPUT_BIT_WIDTH = 44, + + ERROR_DMA_OUTPUT_NONE = ERROR_COMMON_NONE, + ERROR_DMA_OUTPUT_WIDTH = 51, /* invalid width */ + ERROR_DMA_OUTPUT_HEIGHT = 52, /* invalid height */ + ERROR_DMA_OUTPUT_FORMAT = 53, /* invalid format */ + ERROR_DMA_OUTPUT_BIT_WIDTH = 54, /* invalid bit-width */ + ERROR_DMA_OUTPUT_PLANE = 55, /* invalid plane */ + ERROR_DMA_OUTPUT_ORDER = 56, /* invalid order */ + + ERROR_GLOBAL_SHOTMODE_NONE = ERROR_COMMON_NONE, + + /* SENSOR Error(100~199) */ + ERROR_SENSOR_NONE = ERROR_COMMON_NONE, + ERROR_SENSOR_I2C_FAIL = 101, + ERROR_SENSOR_INVALID_FRAMERATE, + ERROR_SENSOR_INVALID_EXPOSURETIME, + ERROR_SENSOR_INVALID_SIZE, + ERROR_SENSOR_INVALID_SETTING, + ERROR_SENSOR_ACTURATOR_INIT_FAIL, + ERROR_SENSOR_INVALID_AF_POS, + ERROR_SENSOR_UNSUPPORT_FUNC, + ERROR_SENSOR_UNSUPPORT_PERI, + ERROR_SENSOR_UNSUPPORT_AF, + + /* ISP Error (200~299) */ + ERROR_ISP_AF_NONE = ERROR_COMMON_NONE, + ERROR_ISP_AF_BUSY = 201, + ERROR_ISP_AF_INVALID_COMMAND = 202, + ERROR_ISP_AF_INVALID_MODE = 203, + ERROR_ISP_FLASH_NONE = ERROR_COMMON_NONE, + ERROR_ISP_AWB_NONE = ERROR_COMMON_NONE, + ERROR_ISP_IMAGE_EFFECT_NONE = ERROR_COMMON_NONE, + ERROR_ISP_ISO_NONE = ERROR_COMMON_NONE, + ERROR_ISP_ADJUST_NONE = ERROR_COMMON_NONE, + ERROR_ISP_METERING_NONE = ERROR_COMMON_NONE, + ERROR_ISP_AFC_NONE = ERROR_COMMON_NONE, + + /* DRC Error (300~399) */ + + /* FD Error (400~499) */ + ERROR_FD_NONE = ERROR_COMMON_NONE, + /* Invalid max number (1~16) */ + ERROR_FD_CONFIG_MAX_NUMBER_STATE = 401, + ERROR_FD_CONFIG_MAX_NUMBER_INVALID = 402, + ERROR_FD_CONFIG_YAW_ANGLE_STATE = 403, + ERROR_FD_CONFIG_YAW_ANGLE_INVALID = 404, + ERROR_FD_CONFIG_ROLL_ANGLE_STATE = 405, + ERROR_FD_CONFIG_ROLL_ANGLE_INVALID = 406, + ERROR_FD_CONFIG_SMILE_MODE_INVALID = 407, + ERROR_FD_CONFIG_BLINK_MODE_INVALID = 408, + ERROR_FD_CONFIG_EYES_DETECT_INVALID = 409, + ERROR_FD_CONFIG_MOUTH_DETECT_INVALID = 410, + ERROR_FD_CONFIG_ORIENTATION_STATE = 411, + ERROR_FD_CONFIG_ORIENTATION_INVALID = 412, + ERROR_FD_CONFIG_ORIENTATION_VALUE_INVALID = 413, + /* PARAM_FdResultStr can be only applied in ready-state or stream off */ + ERROR_FD_RESULT = 414, + /* PARAM_FdModeStr can be only applied in ready-state or stream off */ + ERROR_FD_MODE = 415, + /* Scaler Error (500 ~ 599) */ + ERROR_SCALER_NO_NONE = ERROR_COMMON_NONE, + ERROR_SCALER_DMA_OUTSEL = 501, + ERROR_SCALER_H_RATIO = 502, + ERROR_SCALER_V_RATIO = 503, + + ERROR_SCALER_IMAGE_EFFECT = 510, + + ERROR_SCALER_ROTATE = 520, + ERROR_SCALER_FLIP = 521, +}; + +const char * const fimc_is_strerr(unsigned int error); +const char * const fimc_is_param_strerr(unsigned int error); + +#endif /* FIMC_IS_ERR_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-is-i2c.c b/drivers/media/platform/exynos4-is/fimc-is-i2c.c new file mode 100644 index 00000000..c397777d --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-i2c.c @@ -0,0 +1,126 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Author: Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include "fimc-is-i2c.h" + +struct fimc_is_i2c { + struct i2c_adapter adapter; + struct clk *clock; +}; + +/* + * An empty algorithm is used as the actual I2C bus controller driver + * is implemented in the FIMC-IS subsystem firmware and the host CPU + * doesn't access the I2C bus controller. + */ +static const struct i2c_algorithm fimc_is_i2c_algorithm; + +static int fimc_is_i2c_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct fimc_is_i2c *isp_i2c; + struct i2c_adapter *i2c_adap; + int ret; + + isp_i2c = devm_kzalloc(&pdev->dev, sizeof(*isp_i2c), GFP_KERNEL); + if (!isp_i2c) + return -ENOMEM; + + isp_i2c->clock = devm_clk_get(&pdev->dev, "i2c_isp"); + if (IS_ERR(isp_i2c->clock)) { + dev_err(&pdev->dev, "failed to get the clock\n"); + return PTR_ERR(isp_i2c->clock); + } + + i2c_adap = &isp_i2c->adapter; + i2c_adap->dev.of_node = node; + i2c_adap->dev.parent = &pdev->dev; + strlcpy(i2c_adap->name, "exynos4x12-isp-i2c", sizeof(i2c_adap->name)); + i2c_adap->owner = THIS_MODULE; + i2c_adap->algo = &fimc_is_i2c_algorithm; + i2c_adap->class = I2C_CLASS_SPD; + + ret = i2c_add_adapter(i2c_adap); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add I2C bus %s\n", + node->full_name); + return ret; + } + + platform_set_drvdata(pdev, isp_i2c); + + pm_runtime_enable(&pdev->dev); + pm_runtime_enable(&i2c_adap->dev); + + of_i2c_register_devices(i2c_adap); + + return 0; +} + +static int fimc_is_i2c_remove(struct platform_device *pdev) +{ + struct fimc_is_i2c *isp_i2c = platform_get_drvdata(pdev); + + pm_runtime_disable(&isp_i2c->adapter.dev); + pm_runtime_disable(&pdev->dev); + i2c_del_adapter(&isp_i2c->adapter); + + return 0; +} + +static int fimc_is_i2c_suspend(struct device *dev) +{ + struct fimc_is_i2c *isp_i2c = dev_get_drvdata(dev); + clk_disable_unprepare(isp_i2c->clock); + return 0; +} + +static int fimc_is_i2c_resume(struct device *dev) +{ + struct fimc_is_i2c *isp_i2c = dev_get_drvdata(dev); + return clk_prepare_enable(isp_i2c->clock); +} + +UNIVERSAL_DEV_PM_OPS(fimc_is_i2c_pm_ops, fimc_is_i2c_suspend, + fimc_is_i2c_resume, NULL); + +static const struct of_device_id fimc_is_i2c_of_match[] = { + { .compatible = FIMC_IS_I2C_COMPATIBLE }, + { }, +}; + +static struct platform_driver fimc_is_i2c_driver = { + .probe = fimc_is_i2c_probe, + .remove = fimc_is_i2c_remove, + .driver = { + .of_match_table = fimc_is_i2c_of_match, + .name = "fimc-isp-i2c", + .owner = THIS_MODULE, + .pm = &fimc_is_i2c_pm_ops, + } +}; + +int fimc_is_register_i2c_driver(void) +{ + return platform_driver_register(&fimc_is_i2c_driver); +} + +void fimc_is_unregister_i2c_driver(void) +{ + platform_driver_unregister(&fimc_is_i2c_driver); +} diff --git a/drivers/media/platform/exynos4-is/fimc-is-i2c.h b/drivers/media/platform/exynos4-is/fimc-is-i2c.h new file mode 100644 index 00000000..0d38d6bb --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-i2c.h @@ -0,0 +1,15 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define FIMC_IS_I2C_COMPATIBLE "samsung,exynos4212-i2c-isp" + +int fimc_is_register_i2c_driver(void); +void fimc_is_unregister_i2c_driver(void); diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.c b/drivers/media/platform/exynos4-is/fimc-is-param.c new file mode 100644 index 00000000..53fe2a2b --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-param.c @@ -0,0 +1,900 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Authors: Younghwan Joo + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define pr_fmt(fmt) "%s:%d " fmt, __func__, __LINE__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "fimc-is.h" +#include "fimc-is-command.h" +#include "fimc-is-errno.h" +#include "fimc-is-param.h" +#include "fimc-is-regs.h" +#include "fimc-is-sensor.h" + +static void __hw_param_copy(void *dst, void *src) +{ + memcpy(dst, src, FIMC_IS_PARAM_MAX_SIZE); +} + +void __fimc_is_hw_update_param_global_shotmode(struct fimc_is *is) +{ + struct param_global_shotmode *dst, *src; + + dst = &is->is_p_region->parameter.global.shotmode; + src = &is->config[is->config_index].global.shotmode; + __hw_param_copy(dst, src); +} + +void __fimc_is_hw_update_param_sensor_framerate(struct fimc_is *is) +{ + struct param_sensor_framerate *dst, *src; + + dst = &is->is_p_region->parameter.sensor.frame_rate; + src = &is->config[is->config_index].sensor.frame_rate; + __hw_param_copy(dst, src); +} + +int __fimc_is_hw_update_param(struct fimc_is *is, u32 offset) +{ + struct is_param_region *par = &is->is_p_region->parameter; + struct chain_config *cfg = &is->config[is->config_index]; + + switch (offset) { + case PARAM_ISP_CONTROL: + __hw_param_copy(&par->isp.control, &cfg->isp.control); + break; + + case PARAM_ISP_OTF_INPUT: + __hw_param_copy(&par->isp.otf_input, &cfg->isp.otf_input); + break; + + case PARAM_ISP_DMA1_INPUT: + __hw_param_copy(&par->isp.dma1_input, &cfg->isp.dma1_input); + break; + + case PARAM_ISP_DMA2_INPUT: + __hw_param_copy(&par->isp.dma2_input, &cfg->isp.dma2_input); + break; + + case PARAM_ISP_AA: + __hw_param_copy(&par->isp.aa, &cfg->isp.aa); + break; + + case PARAM_ISP_FLASH: + __hw_param_copy(&par->isp.flash, &cfg->isp.flash); + break; + + case PARAM_ISP_AWB: + __hw_param_copy(&par->isp.awb, &cfg->isp.awb); + break; + + case PARAM_ISP_IMAGE_EFFECT: + __hw_param_copy(&par->isp.effect, &cfg->isp.effect); + break; + + case PARAM_ISP_ISO: + __hw_param_copy(&par->isp.iso, &cfg->isp.iso); + break; + + case PARAM_ISP_ADJUST: + __hw_param_copy(&par->isp.adjust, &cfg->isp.adjust); + break; + + case PARAM_ISP_METERING: + __hw_param_copy(&par->isp.metering, &cfg->isp.metering); + break; + + case PARAM_ISP_AFC: + __hw_param_copy(&par->isp.afc, &cfg->isp.afc); + break; + + case PARAM_ISP_OTF_OUTPUT: + __hw_param_copy(&par->isp.otf_output, &cfg->isp.otf_output); + break; + + case PARAM_ISP_DMA1_OUTPUT: + __hw_param_copy(&par->isp.dma1_output, &cfg->isp.dma1_output); + break; + + case PARAM_ISP_DMA2_OUTPUT: + __hw_param_copy(&par->isp.dma2_output, &cfg->isp.dma2_output); + break; + + case PARAM_DRC_CONTROL: + __hw_param_copy(&par->drc.control, &cfg->drc.control); + break; + + case PARAM_DRC_OTF_INPUT: + __hw_param_copy(&par->drc.otf_input, &cfg->drc.otf_input); + break; + + case PARAM_DRC_DMA_INPUT: + __hw_param_copy(&par->drc.dma_input, &cfg->drc.dma_input); + break; + + case PARAM_DRC_OTF_OUTPUT: + __hw_param_copy(&par->drc.otf_output, &cfg->drc.otf_output); + break; + + case PARAM_FD_CONTROL: + __hw_param_copy(&par->fd.control, &cfg->fd.control); + break; + + case PARAM_FD_OTF_INPUT: + __hw_param_copy(&par->fd.otf_input, &cfg->fd.otf_input); + break; + + case PARAM_FD_DMA_INPUT: + __hw_param_copy(&par->fd.dma_input, &cfg->fd.dma_input); + break; + + case PARAM_FD_CONFIG: + __hw_param_copy(&par->fd.config, &cfg->fd.config); + break; + + default: + return -EINVAL; + } + + return 0; +} + +unsigned int __get_pending_param_count(struct fimc_is *is) +{ + struct chain_config *config = &is->config[is->config_index]; + unsigned long flags; + unsigned int count; + + spin_lock_irqsave(&is->slock, flags); + count = hweight32(config->p_region_index1); + count += hweight32(config->p_region_index2); + spin_unlock_irqrestore(&is->slock, flags); + + return count; +} + +int __is_hw_update_params(struct fimc_is *is) +{ + unsigned long *p_index1, *p_index2; + int i, id, ret = 0; + + id = is->config_index; + p_index1 = &is->config[id].p_region_index1; + p_index2 = &is->config[id].p_region_index2; + + if (test_bit(PARAM_GLOBAL_SHOTMODE, p_index1)) + __fimc_is_hw_update_param_global_shotmode(is); + + if (test_bit(PARAM_SENSOR_FRAME_RATE, p_index1)) + __fimc_is_hw_update_param_sensor_framerate(is); + + for (i = PARAM_ISP_CONTROL; i < PARAM_DRC_CONTROL; i++) { + if (test_bit(i, p_index1)) + ret = __fimc_is_hw_update_param(is, i); + } + + for (i = PARAM_DRC_CONTROL; i < PARAM_SCALERC_CONTROL; i++) { + if (test_bit(i, p_index1)) + ret = __fimc_is_hw_update_param(is, i); + } + + for (i = PARAM_FD_CONTROL; i <= PARAM_FD_CONFIG; i++) { + if (test_bit((i - 32), p_index2)) + ret = __fimc_is_hw_update_param(is, i); + } + + return ret; +} + +void __is_get_frame_size(struct fimc_is *is, struct v4l2_mbus_framefmt *mf) +{ + struct isp_param *isp; + + isp = &is->config[is->config_index].isp; + mf->width = isp->otf_input.width; + mf->height = isp->otf_input.height; +} + +void __is_set_frame_size(struct fimc_is *is, struct v4l2_mbus_framefmt *mf) +{ + unsigned int index = is->config_index; + struct isp_param *isp; + struct drc_param *drc; + struct fd_param *fd; + + isp = &is->config[index].isp; + drc = &is->config[index].drc; + fd = &is->config[index].fd; + + /* Update isp size info (OTF only) */ + isp->otf_input.width = mf->width; + isp->otf_input.height = mf->height; + isp->otf_output.width = mf->width; + isp->otf_output.height = mf->height; + /* Update drc size info (OTF only) */ + drc->otf_input.width = mf->width; + drc->otf_input.height = mf->height; + drc->otf_output.width = mf->width; + drc->otf_output.height = mf->height; + /* Update fd size info (OTF only) */ + fd->otf_input.width = mf->width; + fd->otf_input.height = mf->height; + + if (test_bit(PARAM_ISP_OTF_INPUT, + &is->config[index].p_region_index1)) + return; + + /* Update field */ + fimc_is_set_param_bit(is, PARAM_ISP_OTF_INPUT); + fimc_is_set_param_bit(is, PARAM_ISP_OTF_OUTPUT); + fimc_is_set_param_bit(is, PARAM_DRC_OTF_INPUT); + fimc_is_set_param_bit(is, PARAM_DRC_OTF_OUTPUT); + fimc_is_set_param_bit(is, PARAM_FD_OTF_INPUT); +} + +int fimc_is_hw_get_sensor_max_framerate(struct fimc_is *is) +{ + switch (is->sensor->drvdata->id) { + case FIMC_IS_SENSOR_ID_S5K6A3: + return 30; + default: + return 15; + } +} + +void __is_set_sensor(struct fimc_is *is, int fps) +{ + unsigned int index = is->config_index; + struct sensor_param *sensor; + struct isp_param *isp; + + sensor = &is->config[index].sensor; + isp = &is->config[index].isp; + + if (fps == 0) { + sensor->frame_rate.frame_rate = + fimc_is_hw_get_sensor_max_framerate(is); + isp->otf_input.frametime_min = 0; + isp->otf_input.frametime_max = 66666; + } else { + sensor->frame_rate.frame_rate = fps; + isp->otf_input.frametime_min = 0; + isp->otf_input.frametime_max = (u32)1000000 / fps; + } + + fimc_is_set_param_bit(is, PARAM_SENSOR_FRAME_RATE); + fimc_is_set_param_bit(is, PARAM_ISP_OTF_INPUT); +} + +void __is_set_init_isp_aa(struct fimc_is *is) +{ + struct isp_param *isp; + + isp = &is->config[is->config_index].isp; + + isp->aa.cmd = ISP_AA_COMMAND_START; + isp->aa.target = ISP_AA_TARGET_AF | ISP_AA_TARGET_AE | + ISP_AA_TARGET_AWB; + isp->aa.mode = 0; + isp->aa.scene = 0; + isp->aa.sleep = 0; + isp->aa.face = 0; + isp->aa.touch_x = 0; + isp->aa.touch_y = 0; + isp->aa.manual_af_setting = 0; + isp->aa.err = ISP_AF_ERROR_NONE; + + fimc_is_set_param_bit(is, PARAM_ISP_AA); +} + +void __is_set_isp_flash(struct fimc_is *is, u32 cmd, u32 redeye) +{ + unsigned int index = is->config_index; + struct isp_param *isp = &is->config[index].isp; + + isp->flash.cmd = cmd; + isp->flash.redeye = redeye; + isp->flash.err = ISP_FLASH_ERROR_NONE; + + fimc_is_set_param_bit(is, PARAM_ISP_FLASH); +} + +void __is_set_isp_awb(struct fimc_is *is, u32 cmd, u32 val) +{ + unsigned int index = is->config_index; + struct isp_param *isp; + + isp = &is->config[index].isp; + + isp->awb.cmd = cmd; + isp->awb.illumination = val; + isp->awb.err = ISP_AWB_ERROR_NONE; + + fimc_is_set_param_bit(is, PARAM_ISP_AWB); +} + +void __is_set_isp_effect(struct fimc_is *is, u32 cmd) +{ + unsigned int index = is->config_index; + struct isp_param *isp; + + isp = &is->config[index].isp; + + isp->effect.cmd = cmd; + isp->effect.err = ISP_IMAGE_EFFECT_ERROR_NONE; + + fimc_is_set_param_bit(is, PARAM_ISP_IMAGE_EFFECT); +} + +void __is_set_isp_iso(struct fimc_is *is, u32 cmd, u32 val) +{ + unsigned int index = is->config_index; + struct isp_param *isp; + + isp = &is->config[index].isp; + + isp->iso.cmd = cmd; + isp->iso.value = val; + isp->iso.err = ISP_ISO_ERROR_NONE; + + fimc_is_set_param_bit(is, PARAM_ISP_ISO); +} + +void __is_set_isp_adjust(struct fimc_is *is, u32 cmd, u32 val) +{ + unsigned int index = is->config_index; + unsigned long *p_index; + struct isp_param *isp; + + p_index = &is->config[index].p_region_index1; + isp = &is->config[index].isp; + + switch (cmd) { + case ISP_ADJUST_COMMAND_MANUAL_CONTRAST: + isp->adjust.contrast = val; + break; + case ISP_ADJUST_COMMAND_MANUAL_SATURATION: + isp->adjust.saturation = val; + break; + case ISP_ADJUST_COMMAND_MANUAL_SHARPNESS: + isp->adjust.sharpness = val; + break; + case ISP_ADJUST_COMMAND_MANUAL_EXPOSURE: + isp->adjust.exposure = val; + break; + case ISP_ADJUST_COMMAND_MANUAL_BRIGHTNESS: + isp->adjust.brightness = val; + break; + case ISP_ADJUST_COMMAND_MANUAL_HUE: + isp->adjust.hue = val; + break; + case ISP_ADJUST_COMMAND_AUTO: + isp->adjust.contrast = 0; + isp->adjust.saturation = 0; + isp->adjust.sharpness = 0; + isp->adjust.exposure = 0; + isp->adjust.brightness = 0; + isp->adjust.hue = 0; + break; + } + + if (!test_bit(PARAM_ISP_ADJUST, p_index)) { + isp->adjust.cmd = cmd; + isp->adjust.err = ISP_ADJUST_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_ISP_ADJUST); + } else { + isp->adjust.cmd |= cmd; + } +} + +void __is_set_isp_metering(struct fimc_is *is, u32 id, u32 val) +{ + unsigned int index = is->config_index; + struct isp_param *isp; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index1; + isp = &is->config[index].isp; + + switch (id) { + case IS_METERING_CONFIG_CMD: + isp->metering.cmd = val; + break; + case IS_METERING_CONFIG_WIN_POS_X: + isp->metering.win_pos_x = val; + break; + case IS_METERING_CONFIG_WIN_POS_Y: + isp->metering.win_pos_y = val; + break; + case IS_METERING_CONFIG_WIN_WIDTH: + isp->metering.win_width = val; + break; + case IS_METERING_CONFIG_WIN_HEIGHT: + isp->metering.win_height = val; + break; + default: + return; + } + + if (!test_bit(PARAM_ISP_METERING, p_index)) { + isp->metering.err = ISP_METERING_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_ISP_METERING); + } +} + +void __is_set_isp_afc(struct fimc_is *is, u32 cmd, u32 val) +{ + unsigned int index = is->config_index; + struct isp_param *isp; + + isp = &is->config[index].isp; + + isp->afc.cmd = cmd; + isp->afc.manual = val; + isp->afc.err = ISP_AFC_ERROR_NONE; + + fimc_is_set_param_bit(is, PARAM_ISP_AFC); +} + +void __is_set_drc_control(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct drc_param *drc; + + drc = &is->config[index].drc; + + drc->control.bypass = val; + + fimc_is_set_param_bit(is, PARAM_DRC_CONTROL); +} + +void __is_set_fd_control(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->control.cmd = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) + fimc_is_set_param_bit(is, PARAM_FD_CONTROL); +} + +void __is_set_fd_config_maxface(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.max_number = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_MAXIMUM_NUMBER; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_MAXIMUM_NUMBER; + } +} + +void __is_set_fd_config_rollangle(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.roll_angle = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_ROLL_ANGLE; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_ROLL_ANGLE; + } +} + +void __is_set_fd_config_yawangle(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.yaw_angle = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_YAW_ANGLE; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_YAW_ANGLE; + } +} + +void __is_set_fd_config_smilemode(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.smile_mode = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_SMILE_MODE; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_SMILE_MODE; + } +} + +void __is_set_fd_config_blinkmode(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.blink_mode = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_BLINK_MODE; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_BLINK_MODE; + } +} + +void __is_set_fd_config_eyedetect(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.eye_detect = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_EYES_DETECT; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_EYES_DETECT; + } +} + +void __is_set_fd_config_mouthdetect(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.mouth_detect = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_MOUTH_DETECT; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_MOUTH_DETECT; + } +} + +void __is_set_fd_config_orientation(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.orientation = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_ORIENTATION; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_ORIENTATION; + } +} + +void __is_set_fd_config_orientation_val(struct fimc_is *is, u32 val) +{ + unsigned int index = is->config_index; + struct fd_param *fd; + unsigned long *p_index; + + p_index = &is->config[index].p_region_index2; + fd = &is->config[index].fd; + + fd->config.orientation_value = val; + + if (!test_bit((PARAM_FD_CONFIG - 32), p_index)) { + fd->config.cmd = FD_CONFIG_COMMAND_ORIENTATION_VALUE; + fd->config.err = ERROR_FD_NONE; + fimc_is_set_param_bit(is, PARAM_FD_CONFIG); + } else { + fd->config.cmd |= FD_CONFIG_COMMAND_ORIENTATION_VALUE; + } +} + +void fimc_is_set_initial_params(struct fimc_is *is) +{ + struct global_param *global; + struct sensor_param *sensor; + struct isp_param *isp; + struct drc_param *drc; + struct fd_param *fd; + unsigned long *p_index1, *p_index2; + unsigned int index; + + index = is->config_index; + global = &is->config[index].global; + sensor = &is->config[index].sensor; + isp = &is->config[index].isp; + drc = &is->config[index].drc; + fd = &is->config[index].fd; + p_index1 = &is->config[index].p_region_index1; + p_index2 = &is->config[index].p_region_index2; + + /* Global */ + global->shotmode.cmd = 1; + fimc_is_set_param_bit(is, PARAM_GLOBAL_SHOTMODE); + + /* ISP */ + isp->control.cmd = CONTROL_COMMAND_START; + isp->control.bypass = CONTROL_BYPASS_DISABLE; + isp->control.err = CONTROL_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_ISP_CONTROL); + + isp->otf_input.cmd = OTF_INPUT_COMMAND_ENABLE; + if (!test_bit(PARAM_ISP_OTF_INPUT, p_index1)) { + isp->otf_input.width = DEFAULT_PREVIEW_STILL_WIDTH; + isp->otf_input.height = DEFAULT_PREVIEW_STILL_HEIGHT; + fimc_is_set_param_bit(is, PARAM_ISP_OTF_INPUT); + } + if (is->sensor->test_pattern) + isp->otf_input.format = OTF_INPUT_FORMAT_STRGEN_COLORBAR_BAYER; + else + isp->otf_input.format = OTF_INPUT_FORMAT_BAYER; + isp->otf_input.bitwidth = 10; + isp->otf_input.order = OTF_INPUT_ORDER_BAYER_GR_BG; + isp->otf_input.crop_offset_x = 0; + isp->otf_input.crop_offset_y = 0; + isp->otf_input.err = OTF_INPUT_ERROR_NONE; + + isp->dma1_input.cmd = DMA_INPUT_COMMAND_DISABLE; + isp->dma1_input.width = 0; + isp->dma1_input.height = 0; + isp->dma1_input.format = 0; + isp->dma1_input.bitwidth = 0; + isp->dma1_input.plane = 0; + isp->dma1_input.order = 0; + isp->dma1_input.buffer_number = 0; + isp->dma1_input.width = 0; + isp->dma1_input.err = DMA_INPUT_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_ISP_DMA1_INPUT); + + isp->dma2_input.cmd = DMA_INPUT_COMMAND_DISABLE; + isp->dma2_input.width = 0; + isp->dma2_input.height = 0; + isp->dma2_input.format = 0; + isp->dma2_input.bitwidth = 0; + isp->dma2_input.plane = 0; + isp->dma2_input.order = 0; + isp->dma2_input.buffer_number = 0; + isp->dma2_input.width = 0; + isp->dma2_input.err = DMA_INPUT_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_ISP_DMA2_INPUT); + + isp->aa.cmd = ISP_AA_COMMAND_START; + isp->aa.target = ISP_AA_TARGET_AE | ISP_AA_TARGET_AWB; + fimc_is_set_param_bit(is, PARAM_ISP_AA); + + if (!test_bit(PARAM_ISP_FLASH, p_index1)) + __is_set_isp_flash(is, ISP_FLASH_COMMAND_DISABLE, + ISP_FLASH_REDEYE_DISABLE); + + if (!test_bit(PARAM_ISP_AWB, p_index1)) + __is_set_isp_awb(is, ISP_AWB_COMMAND_AUTO, 0); + + if (!test_bit(PARAM_ISP_IMAGE_EFFECT, p_index1)) + __is_set_isp_effect(is, ISP_IMAGE_EFFECT_DISABLE); + + if (!test_bit(PARAM_ISP_ISO, p_index1)) + __is_set_isp_iso(is, ISP_ISO_COMMAND_AUTO, 0); + + if (!test_bit(PARAM_ISP_ADJUST, p_index1)) { + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_CONTRAST, 0); + __is_set_isp_adjust(is, + ISP_ADJUST_COMMAND_MANUAL_SATURATION, 0); + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_SHARPNESS, 0); + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_EXPOSURE, 0); + __is_set_isp_adjust(is, + ISP_ADJUST_COMMAND_MANUAL_BRIGHTNESS, 0); + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_HUE, 0); + } + + if (!test_bit(PARAM_ISP_METERING, p_index1)) { + __is_set_isp_metering(is, 0, ISP_METERING_COMMAND_CENTER); + __is_set_isp_metering(is, 1, 0); + __is_set_isp_metering(is, 2, 0); + __is_set_isp_metering(is, 3, 0); + __is_set_isp_metering(is, 4, 0); + } + + if (!test_bit(PARAM_ISP_AFC, p_index1)) + __is_set_isp_afc(is, ISP_AFC_COMMAND_AUTO, 0); + + isp->otf_output.cmd = OTF_OUTPUT_COMMAND_ENABLE; + if (!test_bit(PARAM_ISP_OTF_OUTPUT, p_index1)) { + isp->otf_output.width = DEFAULT_PREVIEW_STILL_WIDTH; + isp->otf_output.height = DEFAULT_PREVIEW_STILL_HEIGHT; + fimc_is_set_param_bit(is, PARAM_ISP_OTF_OUTPUT); + } + isp->otf_output.format = OTF_OUTPUT_FORMAT_YUV444; + isp->otf_output.bitwidth = 12; + isp->otf_output.order = 0; + isp->otf_output.err = OTF_OUTPUT_ERROR_NONE; + + if (!test_bit(PARAM_ISP_DMA1_OUTPUT, p_index1)) { + isp->dma1_output.cmd = DMA_OUTPUT_COMMAND_DISABLE; + isp->dma1_output.width = 0; + isp->dma1_output.height = 0; + isp->dma1_output.format = 0; + isp->dma1_output.bitwidth = 0; + isp->dma1_output.plane = 0; + isp->dma1_output.order = 0; + isp->dma1_output.buffer_number = 0; + isp->dma1_output.buffer_address = 0; + isp->dma1_output.notify_dma_done = 0; + isp->dma1_output.dma_out_mask = 0; + isp->dma1_output.err = DMA_OUTPUT_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_ISP_DMA1_OUTPUT); + } + + if (!test_bit(PARAM_ISP_DMA2_OUTPUT, p_index1)) { + isp->dma2_output.cmd = DMA_OUTPUT_COMMAND_DISABLE; + isp->dma2_output.width = 0; + isp->dma2_output.height = 0; + isp->dma2_output.format = 0; + isp->dma2_output.bitwidth = 0; + isp->dma2_output.plane = 0; + isp->dma2_output.order = 0; + isp->dma2_output.buffer_number = 0; + isp->dma2_output.buffer_address = 0; + isp->dma2_output.notify_dma_done = 0; + isp->dma2_output.dma_out_mask = 0; + isp->dma2_output.err = DMA_OUTPUT_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_ISP_DMA2_OUTPUT); + } + + /* Sensor */ + if (!test_bit(PARAM_SENSOR_FRAME_RATE, p_index1)) { + if (is->config_index == 0) + __is_set_sensor(is, 0); + } + + /* DRC */ + drc->control.cmd = CONTROL_COMMAND_START; + __is_set_drc_control(is, CONTROL_BYPASS_ENABLE); + + drc->otf_input.cmd = OTF_INPUT_COMMAND_ENABLE; + if (!test_bit(PARAM_DRC_OTF_INPUT, p_index1)) { + drc->otf_input.width = DEFAULT_PREVIEW_STILL_WIDTH; + drc->otf_input.height = DEFAULT_PREVIEW_STILL_HEIGHT; + fimc_is_set_param_bit(is, PARAM_DRC_OTF_INPUT); + } + drc->otf_input.format = OTF_INPUT_FORMAT_YUV444; + drc->otf_input.bitwidth = 12; + drc->otf_input.order = 0; + drc->otf_input.err = OTF_INPUT_ERROR_NONE; + + drc->dma_input.cmd = DMA_INPUT_COMMAND_DISABLE; + drc->dma_input.width = 0; + drc->dma_input.height = 0; + drc->dma_input.format = 0; + drc->dma_input.bitwidth = 0; + drc->dma_input.plane = 0; + drc->dma_input.order = 0; + drc->dma_input.buffer_number = 0; + drc->dma_input.width = 0; + drc->dma_input.err = DMA_INPUT_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_DRC_DMA_INPUT); + + drc->otf_output.cmd = OTF_OUTPUT_COMMAND_ENABLE; + if (!test_bit(PARAM_DRC_OTF_OUTPUT, p_index1)) { + drc->otf_output.width = DEFAULT_PREVIEW_STILL_WIDTH; + drc->otf_output.height = DEFAULT_PREVIEW_STILL_HEIGHT; + fimc_is_set_param_bit(is, PARAM_DRC_OTF_OUTPUT); + } + drc->otf_output.format = OTF_OUTPUT_FORMAT_YUV444; + drc->otf_output.bitwidth = 8; + drc->otf_output.order = 0; + drc->otf_output.err = OTF_OUTPUT_ERROR_NONE; + + /* FD */ + __is_set_fd_control(is, CONTROL_COMMAND_STOP); + fd->control.bypass = CONTROL_BYPASS_DISABLE; + + fd->otf_input.cmd = OTF_INPUT_COMMAND_ENABLE; + if (!test_bit((PARAM_FD_OTF_INPUT - 32), p_index2)) { + fd->otf_input.width = DEFAULT_PREVIEW_STILL_WIDTH; + fd->otf_input.height = DEFAULT_PREVIEW_STILL_HEIGHT; + fimc_is_set_param_bit(is, PARAM_FD_OTF_INPUT); + } + + fd->otf_input.format = OTF_INPUT_FORMAT_YUV444; + fd->otf_input.bitwidth = 8; + fd->otf_input.order = 0; + fd->otf_input.err = OTF_INPUT_ERROR_NONE; + + fd->dma_input.cmd = DMA_INPUT_COMMAND_DISABLE; + fd->dma_input.width = 0; + fd->dma_input.height = 0; + fd->dma_input.format = 0; + fd->dma_input.bitwidth = 0; + fd->dma_input.plane = 0; + fd->dma_input.order = 0; + fd->dma_input.buffer_number = 0; + fd->dma_input.width = 0; + fd->dma_input.err = DMA_INPUT_ERROR_NONE; + fimc_is_set_param_bit(is, PARAM_FD_DMA_INPUT); + + __is_set_fd_config_maxface(is, 5); + __is_set_fd_config_rollangle(is, FD_CONFIG_ROLL_ANGLE_FULL); + __is_set_fd_config_yawangle(is, FD_CONFIG_YAW_ANGLE_45_90); + __is_set_fd_config_smilemode(is, FD_CONFIG_SMILE_MODE_DISABLE); + __is_set_fd_config_blinkmode(is, FD_CONFIG_BLINK_MODE_DISABLE); + __is_set_fd_config_eyedetect(is, FD_CONFIG_EYES_DETECT_ENABLE); + __is_set_fd_config_mouthdetect(is, FD_CONFIG_MOUTH_DETECT_DISABLE); + __is_set_fd_config_orientation(is, FD_CONFIG_ORIENTATION_DISABLE); + __is_set_fd_config_orientation_val(is, 0); +} diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h b/drivers/media/platform/exynos4-is/fimc-is-param.h new file mode 100644 index 00000000..f9358c27 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h @@ -0,0 +1,1020 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2011 - 2013 Samsung Electronics Co., Ltd. + * + * Authors: Younghwan Joo + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef FIMC_IS_PARAM_H_ +#define FIMC_IS_PARAM_H_ + +#include + +#define FIMC_IS_CONFIG_TIMEOUT 3000 /* ms */ +#define IS_DEFAULT_WIDTH 1280 +#define IS_DEFAULT_HEIGHT 720 + +#define DEFAULT_PREVIEW_STILL_WIDTH IS_DEFAULT_WIDTH +#define DEFAULT_PREVIEW_STILL_HEIGHT IS_DEFAULT_HEIGHT +#define DEFAULT_CAPTURE_STILL_WIDTH IS_DEFAULT_WIDTH +#define DEFAULT_CAPTURE_STILL_HEIGHT IS_DEFAULT_HEIGHT +#define DEFAULT_PREVIEW_VIDEO_WIDTH IS_DEFAULT_WIDTH +#define DEFAULT_PREVIEW_VIDEO_HEIGHT IS_DEFAULT_HEIGHT +#define DEFAULT_CAPTURE_VIDEO_WIDTH IS_DEFAULT_WIDTH +#define DEFAULT_CAPTURE_VIDEO_HEIGHT IS_DEFAULT_HEIGHT + +#define DEFAULT_PREVIEW_STILL_FRAMERATE 30 +#define DEFAULT_CAPTURE_STILL_FRAMERATE 15 +#define DEFAULT_PREVIEW_VIDEO_FRAMERATE 30 +#define DEFAULT_CAPTURE_VIDEO_FRAMERATE 30 + +#define FIMC_IS_REGION_VER 124 /* IS REGION VERSION 1.24 */ +#define FIMC_IS_PARAM_SIZE (FIMC_IS_REGION_SIZE + 1) +#define FIMC_IS_MAGIC_NUMBER 0x01020304 +#define FIMC_IS_PARAM_MAX_SIZE 64 /* in bytes */ +#define FIMC_IS_PARAM_MAX_ENTRIES (FIMC_IS_PARAM_MAX_SIZE / 4) + +/* The parameter bitmask bit definitions. */ +enum is_param_bit { + PARAM_GLOBAL_SHOTMODE, + PARAM_SENSOR_CONTROL, + PARAM_SENSOR_OTF_OUTPUT, + PARAM_SENSOR_FRAME_RATE, + PARAM_BUFFER_CONTROL, + PARAM_BUFFER_OTF_INPUT, + PARAM_BUFFER_OTF_OUTPUT, + PARAM_ISP_CONTROL, + PARAM_ISP_OTF_INPUT, + PARAM_ISP_DMA1_INPUT, + /* 10 */ + PARAM_ISP_DMA2_INPUT, + PARAM_ISP_AA, + PARAM_ISP_FLASH, + PARAM_ISP_AWB, + PARAM_ISP_IMAGE_EFFECT, + PARAM_ISP_ISO, + PARAM_ISP_ADJUST, + PARAM_ISP_METERING, + PARAM_ISP_AFC, + PARAM_ISP_OTF_OUTPUT, + /* 20 */ + PARAM_ISP_DMA1_OUTPUT, + PARAM_ISP_DMA2_OUTPUT, + PARAM_DRC_CONTROL, + PARAM_DRC_OTF_INPUT, + PARAM_DRC_DMA_INPUT, + PARAM_DRC_OTF_OUTPUT, + PARAM_SCALERC_CONTROL, + PARAM_SCALERC_OTF_INPUT, + PARAM_SCALERC_IMAGE_EFFECT, + PARAM_SCALERC_INPUT_CROP, + /* 30 */ + PARAM_SCALERC_OUTPUT_CROP, + PARAM_SCALERC_OTF_OUTPUT, + PARAM_SCALERC_DMA_OUTPUT, + PARAM_ODC_CONTROL, + PARAM_ODC_OTF_INPUT, + PARAM_ODC_OTF_OUTPUT, + PARAM_DIS_CONTROL, + PARAM_DIS_OTF_INPUT, + PARAM_DIS_OTF_OUTPUT, + PARAM_TDNR_CONTROL, + /* 40 */ + PARAM_TDNR_OTF_INPUT, + PARAM_TDNR_1ST_FRAME, + PARAM_TDNR_OTF_OUTPUT, + PARAM_TDNR_DMA_OUTPUT, + PARAM_SCALERP_CONTROL, + PARAM_SCALERP_OTF_INPUT, + PARAM_SCALERP_IMAGE_EFFECT, + PARAM_SCALERP_INPUT_CROP, + PARAM_SCALERP_OUTPUT_CROP, + PARAM_SCALERP_ROTATION, + /* 50 */ + PARAM_SCALERP_FLIP, + PARAM_SCALERP_OTF_OUTPUT, + PARAM_SCALERP_DMA_OUTPUT, + PARAM_FD_CONTROL, + PARAM_FD_OTF_INPUT, + PARAM_FD_DMA_INPUT, + PARAM_FD_CONFIG, +}; + +/* Interrupt map */ +#define FIMC_IS_INT_GENERAL 0 +#define FIMC_IS_INT_FRAME_DONE_ISP 1 + +/* Input */ + +#define CONTROL_COMMAND_STOP 0 +#define CONTROL_COMMAND_START 1 + +#define CONTROL_BYPASS_DISABLE 0 +#define CONTROL_BYPASS_ENABLE 1 + +#define CONTROL_ERROR_NONE 0 + +/* OTF (On-The-Fly) input interface commands */ +#define OTF_INPUT_COMMAND_DISABLE 0 +#define OTF_INPUT_COMMAND_ENABLE 1 + +/* OTF input interface color formats */ +enum oft_input_fmt { + OTF_INPUT_FORMAT_BAYER = 0, /* 1 channel */ + OTF_INPUT_FORMAT_YUV444 = 1, /* 3 channels */ + OTF_INPUT_FORMAT_YUV422 = 2, /* 3 channels */ + OTF_INPUT_FORMAT_YUV420 = 3, /* 3 channels */ + OTF_INPUT_FORMAT_STRGEN_COLORBAR_BAYER = 10, + OTF_INPUT_FORMAT_BAYER_DMA = 11, +}; + +#define OTF_INPUT_ORDER_BAYER_GR_BG 0 + +/* OTF input error codes */ +#define OTF_INPUT_ERROR_NONE 0 /* Input setting is done */ + +/* DMA input commands */ +#define DMA_INPUT_COMMAND_DISABLE 0 +#define DMA_INPUT_COMMAND_ENABLE 1 + +/* DMA input color formats */ +enum dma_input_fmt { + DMA_INPUT_FORMAT_BAYER = 0, + DMA_INPUT_FORMAT_YUV444 = 1, + DMA_INPUT_FORMAT_YUV422 = 2, + DMA_INPUT_FORMAT_YUV420 = 3, +}; + +enum dma_input_order { + /* (for DMA_INPUT_PLANE_3) */ + DMA_INPUT_ORDER_NO = 0, + /* (only valid at DMA_INPUT_PLANE_2) */ + DMA_INPUT_ORDER_CBCR = 1, + /* (only valid at DMA_INPUT_PLANE_2) */ + DMA_INPUT_ORDER_CRCB = 2, + /* (only valid at DMA_INPUT_PLANE_1 & DMA_INPUT_FORMAT_YUV444) */ + DMA_INPUT_ORDER_YCBCR = 3, + /* (only valid at DMA_INPUT_FORMAT_YUV422 & DMA_INPUT_PLANE_1) */ + DMA_INPUT_ORDER_YYCBCR = 4, + /* (only valid at DMA_INPUT_FORMAT_YUV422 & DMA_INPUT_PLANE_1) */ + DMA_INPUT_ORDER_YCBYCR = 5, + /* (only valid at DMA_INPUT_FORMAT_YUV422 & DMA_INPUT_PLANE_1) */ + DMA_INPUT_ORDER_YCRYCB = 6, + /* (only valid at DMA_INPUT_FORMAT_YUV422 & DMA_INPUT_PLANE_1) */ + DMA_INPUT_ORDER_CBYCRY = 7, + /* (only valid at DMA_INPUT_FORMAT_YUV422 & DMA_INPUT_PLANE_1) */ + DMA_INPUT_ORDER_CRYCBY = 8, + /* (only valid at DMA_INPUT_FORMAT_BAYER) */ + DMA_INPUT_ORDER_GR_BG = 9 +}; + +#define DMA_INPUT_ERROR_NONE 0 /* DMA input setting + is done */ +/* + * Data output parameter definitions + */ +#define OTF_OUTPUT_CROP_DISABLE 0 +#define OTF_OUTPUT_CROP_ENABLE 1 + +#define OTF_OUTPUT_COMMAND_DISABLE 0 +#define OTF_OUTPUT_COMMAND_ENABLE 1 + +enum otf_output_fmt { + OTF_OUTPUT_FORMAT_YUV444 = 1, + OTF_OUTPUT_FORMAT_YUV422 = 2, + OTF_OUTPUT_FORMAT_YUV420 = 3, + OTF_OUTPUT_FORMAT_RGB = 4, +}; + +#define OTF_OUTPUT_ORDER_BAYER_GR_BG 0 + +#define OTF_OUTPUT_ERROR_NONE 0 /* Output Setting is done */ + +#define DMA_OUTPUT_COMMAND_DISABLE 0 +#define DMA_OUTPUT_COMMAND_ENABLE 1 + +enum dma_output_fmt { + DMA_OUTPUT_FORMAT_BAYER = 0, + DMA_OUTPUT_FORMAT_YUV444 = 1, + DMA_OUTPUT_FORMAT_YUV422 = 2, + DMA_OUTPUT_FORMAT_YUV420 = 3, + DMA_OUTPUT_FORMAT_RGB = 4, +}; + +enum dma_output_order { + DMA_OUTPUT_ORDER_NO = 0, + /* for DMA_OUTPUT_PLANE_3 */ + DMA_OUTPUT_ORDER_CBCR = 1, + /* only valid at DMA_INPUT_PLANE_2) */ + DMA_OUTPUT_ORDER_CRCB = 2, + /* only valid at DMA_OUTPUT_PLANE_2) */ + DMA_OUTPUT_ORDER_YYCBCR = 3, + /* only valid at DMA_OUTPUT_FORMAT_YUV422 & DMA_OUTPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_YCBYCR = 4, + /* only valid at DMA_OUTPUT_FORMAT_YUV422 & DMA_OUTPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_YCRYCB = 5, + /* only valid at DMA_OUTPUT_FORMAT_YUV422 & DMA_OUTPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_CBYCRY = 6, + /* only valid at DMA_OUTPUT_FORMAT_YUV422 & DMA_OUTPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_CRYCBY = 7, + /* only valid at DMA_OUTPUT_FORMAT_YUV422 & DMA_OUTPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_YCBCR = 8, + /* only valid at DMA_OUTPUT_FORMAT_YUV444 & DMA_OUPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_CRYCB = 9, + /* only valid at DMA_OUTPUT_FORMAT_YUV444 & DMA_OUPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_CRCBY = 10, + /* only valid at DMA_OUTPUT_FORMAT_YUV444 & DMA_OUPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_CBYCR = 11, + /* only valid at DMA_OUTPUT_FORMAT_YUV444 & DMA_OUPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_YCRCB = 12, + /* only valid at DMA_OUTPUT_FORMAT_YUV444 & DMA_OUPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_CBCRY = 13, + /* only valid at DMA_OUTPUT_FORMAT_YUV444 & DMA_OUPUT_PLANE_1 */ + DMA_OUTPUT_ORDER_BGR = 14, + /* only valid at DMA_OUTPUT_FORMAT_RGB */ + DMA_OUTPUT_ORDER_GB_BG = 15 + /* only valid at DMA_OUTPUT_FORMAT_BAYER */ +}; + +/* enum dma_output_notify_dma_done */ +#define DMA_OUTPUT_NOTIFY_DMA_DONE_DISABLE 0 +#define DMA_OUTPUT_NOTIFY_DMA_DONE_ENABLE 1 + +/* DMA output error codes */ +#define DMA_OUTPUT_ERROR_NONE 0 /* DMA output setting + is done */ + +/* ---------------------- Global ----------------------------------- */ +#define GLOBAL_SHOTMODE_ERROR_NONE 0 /* shot-mode setting + is done */ +/* 3A lock commands */ +#define ISP_AA_COMMAND_START 0 +#define ISP_AA_COMMAND_STOP 1 + +/* 3A lock target */ +#define ISP_AA_TARGET_AF 1 +#define ISP_AA_TARGET_AE 2 +#define ISP_AA_TARGET_AWB 4 + +enum isp_af_mode { + ISP_AF_MODE_MANUAL = 0, + ISP_AF_MODE_SINGLE = 1, + ISP_AF_MODE_CONTINUOUS = 2, + ISP_AF_MODE_TOUCH = 3, + ISP_AF_MODE_SLEEP = 4, + ISP_AF_MODE_INIT = 5, + ISP_AF_MODE_SET_CENTER_WINDOW = 6, + ISP_AF_MODE_SET_TOUCH_WINDOW = 7 +}; + +/* Face AF commands */ +#define ISP_AF_FACE_DISABLE 0 +#define ISP_AF_FACE_ENABLE 1 + +/* AF range */ +#define ISP_AF_RANGE_NORMAL 0 +#define ISP_AF_RANGE_MACRO 1 + +/* AF sleep */ +#define ISP_AF_SLEEP_OFF 0 +#define ISP_AF_SLEEP_ON 1 + +/* Continuous AF commands */ +#define ISP_AF_CONTINUOUS_DISABLE 0 +#define ISP_AF_CONTINUOUS_ENABLE 1 + +/* ISP AF error codes */ +#define ISP_AF_ERROR_NONE 0 /* AF mode change is done */ +#define ISP_AF_ERROR_NONE_LOCK_DONE 1 /* AF lock is done */ + +/* Flash commands */ +#define ISP_FLASH_COMMAND_DISABLE 0 +#define ISP_FLASH_COMMAND_MANUAL_ON 1 /* (forced flash) */ +#define ISP_FLASH_COMMAND_AUTO 2 +#define ISP_FLASH_COMMAND_TORCH 3 /* 3 sec */ + +/* Flash red-eye commads */ +#define ISP_FLASH_REDEYE_DISABLE 0 +#define ISP_FLASH_REDEYE_ENABLE 1 + +/* Flash error codes */ +#define ISP_FLASH_ERROR_NONE 0 /* Flash setting is done */ + +/* -------------------------- AWB ------------------------------------ */ +enum isp_awb_command { + ISP_AWB_COMMAND_AUTO = 0, + ISP_AWB_COMMAND_ILLUMINATION = 1, + ISP_AWB_COMMAND_MANUAL = 2 +}; + +enum isp_awb_illumination { + ISP_AWB_ILLUMINATION_DAYLIGHT = 0, + ISP_AWB_ILLUMINATION_CLOUDY = 1, + ISP_AWB_ILLUMINATION_TUNGSTEN = 2, + ISP_AWB_ILLUMINATION_FLUORESCENT = 3 +}; + +/* ISP AWN error codes */ +#define ISP_AWB_ERROR_NONE 0 /* AWB setting is done */ + +/* -------------------------- Effect ----------------------------------- */ +enum isp_imageeffect_command { + ISP_IMAGE_EFFECT_DISABLE = 0, + ISP_IMAGE_EFFECT_MONOCHROME = 1, + ISP_IMAGE_EFFECT_NEGATIVE_MONO = 2, + ISP_IMAGE_EFFECT_NEGATIVE_COLOR = 3, + ISP_IMAGE_EFFECT_SEPIA = 4 +}; + +/* Image effect error codes */ +#define ISP_IMAGE_EFFECT_ERROR_NONE 0 /* Image effect setting + is done */ +/* ISO commands */ +#define ISP_ISO_COMMAND_AUTO 0 +#define ISP_ISO_COMMAND_MANUAL 1 + +/* ISO error codes */ +#define ISP_ISO_ERROR_NONE 0 /* ISO setting is done */ + +/* ISP adjust commands */ +#define ISP_ADJUST_COMMAND_AUTO (0 << 0) +#define ISP_ADJUST_COMMAND_MANUAL_CONTRAST (1 << 0) +#define ISP_ADJUST_COMMAND_MANUAL_SATURATION (1 << 1) +#define ISP_ADJUST_COMMAND_MANUAL_SHARPNESS (1 << 2) +#define ISP_ADJUST_COMMAND_MANUAL_EXPOSURE (1 << 3) +#define ISP_ADJUST_COMMAND_MANUAL_BRIGHTNESS (1 << 4) +#define ISP_ADJUST_COMMAND_MANUAL_HUE (1 << 5) +#define ISP_ADJUST_COMMAND_MANUAL_ALL 0x7f + +/* ISP adjustment error codes */ +#define ISP_ADJUST_ERROR_NONE 0 /* Adjust setting is done */ + +/* + * Exposure metering + */ +enum isp_metering_command { + ISP_METERING_COMMAND_AVERAGE = 0, + ISP_METERING_COMMAND_SPOT = 1, + ISP_METERING_COMMAND_MATRIX = 2, + ISP_METERING_COMMAND_CENTER = 3 +}; + +/* ISP metering error codes */ +#define ISP_METERING_ERROR_NONE 0 /* Metering setting is done */ + +/* + * AFC + */ +enum isp_afc_command { + ISP_AFC_COMMAND_DISABLE = 0, + ISP_AFC_COMMAND_AUTO = 1, + ISP_AFC_COMMAND_MANUAL = 2, +}; + +#define ISP_AFC_MANUAL_50HZ 50 +#define ISP_AFC_MANUAL_60HZ 60 + +/* ------------------------ SCENE MODE--------------------------------- */ +enum isp_scene_mode { + ISP_SCENE_NONE = 0, + ISP_SCENE_PORTRAIT = 1, + ISP_SCENE_LANDSCAPE = 2, + ISP_SCENE_SPORTS = 3, + ISP_SCENE_PARTYINDOOR = 4, + ISP_SCENE_BEACHSNOW = 5, + ISP_SCENE_SUNSET = 6, + ISP_SCENE_DAWN = 7, + ISP_SCENE_FALL = 8, + ISP_SCENE_NIGHT = 9, + ISP_SCENE_AGAINSTLIGHTWLIGHT = 10, + ISP_SCENE_AGAINSTLIGHTWOLIGHT = 11, + ISP_SCENE_FIRE = 12, + ISP_SCENE_TEXT = 13, + ISP_SCENE_CANDLE = 14 +}; + +/* AFC error codes */ +#define ISP_AFC_ERROR_NONE 0 /* AFC setting is done */ + +/* ---------------------------- FD ------------------------------------- */ +enum fd_config_command { + FD_CONFIG_COMMAND_MAXIMUM_NUMBER = 0x1, + FD_CONFIG_COMMAND_ROLL_ANGLE = 0x2, + FD_CONFIG_COMMAND_YAW_ANGLE = 0x4, + FD_CONFIG_COMMAND_SMILE_MODE = 0x8, + FD_CONFIG_COMMAND_BLINK_MODE = 0x10, + FD_CONFIG_COMMAND_EYES_DETECT = 0x20, + FD_CONFIG_COMMAND_MOUTH_DETECT = 0x40, + FD_CONFIG_COMMAND_ORIENTATION = 0x80, + FD_CONFIG_COMMAND_ORIENTATION_VALUE = 0x100 +}; + +enum fd_config_roll_angle { + FD_CONFIG_ROLL_ANGLE_BASIC = 0, + FD_CONFIG_ROLL_ANGLE_PRECISE_BASIC = 1, + FD_CONFIG_ROLL_ANGLE_SIDES = 2, + FD_CONFIG_ROLL_ANGLE_PRECISE_SIDES = 3, + FD_CONFIG_ROLL_ANGLE_FULL = 4, + FD_CONFIG_ROLL_ANGLE_PRECISE_FULL = 5, +}; + +enum fd_config_yaw_angle { + FD_CONFIG_YAW_ANGLE_0 = 0, + FD_CONFIG_YAW_ANGLE_45 = 1, + FD_CONFIG_YAW_ANGLE_90 = 2, + FD_CONFIG_YAW_ANGLE_45_90 = 3, +}; + +/* Smile mode configuration */ +#define FD_CONFIG_SMILE_MODE_DISABLE 0 +#define FD_CONFIG_SMILE_MODE_ENABLE 1 + +/* Blink mode configuration */ +#define FD_CONFIG_BLINK_MODE_DISABLE 0 +#define FD_CONFIG_BLINK_MODE_ENABLE 1 + +/* Eyes detection configuration */ +#define FD_CONFIG_EYES_DETECT_DISABLE 0 +#define FD_CONFIG_EYES_DETECT_ENABLE 1 + +/* Mouth detection configuration */ +#define FD_CONFIG_MOUTH_DETECT_DISABLE 0 +#define FD_CONFIG_MOUTH_DETECT_ENABLE 1 + +#define FD_CONFIG_ORIENTATION_DISABLE 0 +#define FD_CONFIG_ORIENTATION_ENABLE 1 + +struct param_control { + u32 cmd; + u32 bypass; + u32 buffer_address; + u32 buffer_size; + u32 skip_frames; /* only valid at ISP */ + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 6]; + u32 err; +}; + +struct param_otf_input { + u32 cmd; + u32 width; + u32 height; + u32 format; + u32 bitwidth; + u32 order; + u32 crop_offset_x; + u32 crop_offset_y; + u32 crop_width; + u32 crop_height; + u32 frametime_min; + u32 frametime_max; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 13]; + u32 err; +}; + +struct param_dma_input { + u32 cmd; + u32 width; + u32 height; + u32 format; + u32 bitwidth; + u32 plane; + u32 order; + u32 buffer_number; + u32 buffer_address; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 10]; + u32 err; +}; + +struct param_otf_output { + u32 cmd; + u32 width; + u32 height; + u32 format; + u32 bitwidth; + u32 order; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 7]; + u32 err; +}; + +struct param_dma_output { + u32 cmd; + u32 width; + u32 height; + u32 format; + u32 bitwidth; + u32 plane; + u32 order; + u32 buffer_number; + u32 buffer_address; + u32 notify_dma_done; + u32 dma_out_mask; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 12]; + u32 err; +}; + +struct param_global_shotmode { + u32 cmd; + u32 skip_frames; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 3]; + u32 err; +}; + +struct param_sensor_framerate { + u32 frame_rate; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 2]; + u32 err; +}; + +struct param_isp_aa { + u32 cmd; + u32 target; + u32 mode; + u32 scene; + u32 sleep; + u32 face; + u32 touch_x; + u32 touch_y; + u32 manual_af_setting; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 10]; + u32 err; +}; + +struct param_isp_flash { + u32 cmd; + u32 redeye; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 3]; + u32 err; +}; + +struct param_isp_awb { + u32 cmd; + u32 illumination; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 3]; + u32 err; +}; + +struct param_isp_imageeffect { + u32 cmd; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 2]; + u32 err; +}; + +struct param_isp_iso { + u32 cmd; + u32 value; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 3]; + u32 err; +}; + +struct param_isp_adjust { + u32 cmd; + s32 contrast; + s32 saturation; + s32 sharpness; + s32 exposure; + s32 brightness; + s32 hue; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 8]; + u32 err; +}; + +struct param_isp_metering { + u32 cmd; + u32 win_pos_x; + u32 win_pos_y; + u32 win_width; + u32 win_height; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 6]; + u32 err; +}; + +struct param_isp_afc { + u32 cmd; + u32 manual; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 3]; + u32 err; +}; + +struct param_scaler_imageeffect { + u32 cmd; + u32 arbitrary_cb; + u32 arbitrary_cr; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 4]; + u32 err; +}; + +struct param_scaler_input_crop { + u32 cmd; + u32 crop_offset_x; + u32 crop_offset_y; + u32 crop_width; + u32 crop_height; + u32 in_width; + u32 in_height; + u32 out_width; + u32 out_height; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 10]; + u32 err; +}; + +struct param_scaler_output_crop { + u32 cmd; + u32 crop_offset_x; + u32 crop_offset_y; + u32 crop_width; + u32 crop_height; + u32 out_format; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 7]; + u32 err; +}; + +struct param_scaler_rotation { + u32 cmd; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 2]; + u32 err; +}; + +struct param_scaler_flip { + u32 cmd; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 2]; + u32 err; +}; + +struct param_3dnr_1stframe { + u32 cmd; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 2]; + u32 err; +}; + +struct param_fd_config { + u32 cmd; + u32 max_number; + u32 roll_angle; + u32 yaw_angle; + u32 smile_mode; + u32 blink_mode; + u32 eye_detect; + u32 mouth_detect; + u32 orientation; + u32 orientation_value; + u32 reserved[FIMC_IS_PARAM_MAX_ENTRIES - 11]; + u32 err; +}; + +struct global_param { + struct param_global_shotmode shotmode; +}; + +struct sensor_param { + struct param_control control; + struct param_otf_output otf_output; + struct param_sensor_framerate frame_rate; +} __packed; + +struct buffer_param { + struct param_control control; + struct param_otf_input otf_input; + struct param_otf_output otf_output; +} __packed; + +struct isp_param { + struct param_control control; + struct param_otf_input otf_input; + struct param_dma_input dma1_input; + struct param_dma_input dma2_input; + struct param_isp_aa aa; + struct param_isp_flash flash; + struct param_isp_awb awb; + struct param_isp_imageeffect effect; + struct param_isp_iso iso; + struct param_isp_adjust adjust; + struct param_isp_metering metering; + struct param_isp_afc afc; + struct param_otf_output otf_output; + struct param_dma_output dma1_output; + struct param_dma_output dma2_output; +} __packed; + +struct drc_param { + struct param_control control; + struct param_otf_input otf_input; + struct param_dma_input dma_input; + struct param_otf_output otf_output; +} __packed; + +struct scalerc_param { + struct param_control control; + struct param_otf_input otf_input; + struct param_scaler_imageeffect effect; + struct param_scaler_input_crop input_crop; + struct param_scaler_output_crop output_crop; + struct param_otf_output otf_output; + struct param_dma_output dma_output; +} __packed; + +struct odc_param { + struct param_control control; + struct param_otf_input otf_input; + struct param_otf_output otf_output; +} __packed; + +struct dis_param { + struct param_control control; + struct param_otf_output otf_input; + struct param_otf_output otf_output; +} __packed; + +struct tdnr_param { + struct param_control control; + struct param_otf_input otf_input; + struct param_3dnr_1stframe frame; + struct param_otf_output otf_output; + struct param_dma_output dma_output; +} __packed; + +struct scalerp_param { + struct param_control control; + struct param_otf_input otf_input; + struct param_scaler_imageeffect effect; + struct param_scaler_input_crop input_crop; + struct param_scaler_output_crop output_crop; + struct param_scaler_rotation rotation; + struct param_scaler_flip flip; + struct param_otf_output otf_output; + struct param_dma_output dma_output; +} __packed; + +struct fd_param { + struct param_control control; + struct param_otf_input otf_input; + struct param_dma_input dma_input; + struct param_fd_config config; +} __packed; + +struct is_param_region { + struct global_param global; + struct sensor_param sensor; + struct buffer_param buf; + struct isp_param isp; + struct drc_param drc; + struct scalerc_param scalerc; + struct odc_param odc; + struct dis_param dis; + struct tdnr_param tdnr; + struct scalerp_param scalerp; + struct fd_param fd; +} __packed; + +#define NUMBER_OF_GAMMA_CURVE_POINTS 32 + +struct is_tune_sensor { + u32 exposure; + u32 analog_gain; + u32 frame_rate; + u32 actuator_position; +}; + +struct is_tune_gammacurve { + u32 num_pts_x[NUMBER_OF_GAMMA_CURVE_POINTS]; + u32 num_pts_y_r[NUMBER_OF_GAMMA_CURVE_POINTS]; + u32 num_pts_y_g[NUMBER_OF_GAMMA_CURVE_POINTS]; + u32 num_pts_y_b[NUMBER_OF_GAMMA_CURVE_POINTS]; +}; + +struct is_tune_isp { + /* Brightness level: range 0...100, default 7. */ + u32 brightness_level; + /* Contrast level: range -127...127, default 0. */ + s32 contrast_level; + /* Saturation level: range -127...127, default 0. */ + s32 saturation_level; + s32 gamma_level; + struct is_tune_gammacurve gamma_curve[4]; + /* Hue: range -127...127, default 0. */ + s32 hue; + /* Sharpness blur: range -127...127, default 0. */ + s32 sharpness_blur; + /* Despeckle : range -127~127, default : 0 */ + s32 despeckle; + /* Edge color supression: range -127...127, default 0. */ + s32 edge_color_supression; + /* Noise reduction: range -127...127, default 0. */ + s32 noise_reduction; + /* (32 * 4 + 9) * 4 = 548 bytes */ +} __packed; + +struct is_tune_region { + struct is_tune_sensor sensor; + struct is_tune_isp isp; +} __packed; + +struct rational { + u32 num; + u32 den; +}; + +struct srational { + s32 num; + s32 den; +}; + +#define FLASH_FIRED_SHIFT 0 +#define FLASH_NOT_FIRED 0 +#define FLASH_FIRED 1 + +#define FLASH_STROBE_SHIFT 1 +#define FLASH_STROBE_NO_DETECTION 0 +#define FLASH_STROBE_RESERVED 1 +#define FLASH_STROBE_RETURN_LIGHT_NOT_DETECTED 2 +#define FLASH_STROBE_RETURN_LIGHT_DETECTED 3 + +#define FLASH_MODE_SHIFT 3 +#define FLASH_MODE_UNKNOWN 0 +#define FLASH_MODE_COMPULSORY_FLASH_FIRING 1 +#define FLASH_MODE_COMPULSORY_FLASH_SUPPRESSION 2 +#define FLASH_MODE_AUTO_MODE 3 + +#define FLASH_FUNCTION_SHIFT 5 +#define FLASH_FUNCTION_PRESENT 0 +#define FLASH_FUNCTION_NONE 1 + +#define FLASH_RED_EYE_SHIFT 6 +#define FLASH_RED_EYE_DISABLED 0 +#define FLASH_RED_EYE_SUPPORTED 1 + +enum apex_aperture_value { + F1_0 = 0, + F1_4 = 1, + F2_0 = 2, + F2_8 = 3, + F4_0 = 4, + F5_6 = 5, + F8_9 = 6, + F11_0 = 7, + F16_0 = 8, + F22_0 = 9, + F32_0 = 10, +}; + +struct exif_attribute { + struct rational exposure_time; + struct srational shutter_speed; + u32 iso_speed_rating; + u32 flash; + struct srational brightness; +} __packed; + +struct is_frame_header { + u32 valid; + u32 bad_mark; + u32 captured; + u32 frame_number; + struct exif_attribute exif; +} __packed; + +struct is_fd_rect { + u32 offset_x; + u32 offset_y; + u32 width; + u32 height; +}; + +struct is_face_marker { + u32 frame_number; + struct is_fd_rect face; + struct is_fd_rect left_eye; + struct is_fd_rect right_eye; + struct is_fd_rect mouth; + u32 roll_angle; + u32 yaw_angle; + u32 confidence; + s32 smile_level; + s32 blink_level; +} __packed; + +#define MAX_FRAME_COUNT 8 +#define MAX_FRAME_COUNT_PREVIEW 4 +#define MAX_FRAME_COUNT_CAPTURE 1 +#define MAX_FACE_COUNT 16 +#define MAX_SHARED_COUNT 500 + +struct is_region { + struct is_param_region parameter; + struct is_tune_region tune; + struct is_frame_header header[MAX_FRAME_COUNT]; + struct is_face_marker face[MAX_FACE_COUNT]; + u32 shared[MAX_SHARED_COUNT]; +} __packed; + +struct is_debug_frame_descriptor { + u32 sensor_frame_time; + u32 sensor_exposure_time; + s32 sensor_analog_gain; + /* monitor for AA */ + u32 req_lei; + + u32 next_next_lei_exp; + u32 next_next_lei_a_gain; + u32 next_next_lei_d_gain; + u32 next_next_lei_statlei; + u32 next_next_lei_lei; + + u32 dummy0; +}; + +#define MAX_FRAMEDESCRIPTOR_CONTEXT_NUM (30*20) /* 600 frames */ +#define MAX_VERSION_DISPLAY_BUF 32 + +struct is_share_region { + u32 frame_time; + u32 exposure_time; + s32 analog_gain; + + u32 r_gain; + u32 g_gain; + u32 b_gain; + + u32 af_position; + u32 af_status; + /* 0 : SIRC_ISP_CAMERA_AUTOFOCUSMESSAGE_NOMESSAGE */ + /* 1 : SIRC_ISP_CAMERA_AUTOFOCUSMESSAGE_REACHED */ + /* 2 : SIRC_ISP_CAMERA_AUTOFOCUSMESSAGE_UNABLETOREACH */ + /* 3 : SIRC_ISP_CAMERA_AUTOFOCUSMESSAGE_LOST */ + /* default : unknown */ + u32 af_scene_type; + + u32 frame_descp_onoff_control; + u32 frame_descp_update_done; + u32 frame_descp_idx; + u32 frame_descp_max_idx; + struct is_debug_frame_descriptor + dbg_frame_descp_ctx[MAX_FRAMEDESCRIPTOR_CONTEXT_NUM]; + + u32 chip_id; + u32 chip_rev_no; + u8 isp_fw_ver_no[MAX_VERSION_DISPLAY_BUF]; + u8 isp_fw_ver_date[MAX_VERSION_DISPLAY_BUF]; + u8 sirc_sdk_ver_no[MAX_VERSION_DISPLAY_BUF]; + u8 sirc_sdk_rev_no[MAX_VERSION_DISPLAY_BUF]; + u8 sirc_sdk_rev_date[MAX_VERSION_DISPLAY_BUF]; +} __packed; + +struct is_debug_control { + u32 write_point; /* 0~ 500KB boundary */ + u32 assert_flag; /* 0: Not invoked, 1: Invoked */ + u32 pabort_flag; /* 0: Not invoked, 1: Invoked */ + u32 dabort_flag; /* 0: Not invoked, 1: Invoked */ +}; + +struct sensor_open_extended { + u32 actuator_type; + u32 mclk; + u32 mipi_lane_num; + u32 mipi_speed; + /* Skip setfile loading when fast_open_sensor is not 0 */ + u32 fast_open_sensor; + /* Activating sensor self calibration mode (6A3) */ + u32 self_calibration_mode; + /* This field is to adjust I2c clock based on ACLK200 */ + /* This value is varied in case of rev 0.2 */ + u32 i2c_sclk; +}; + +struct fimc_is; + +int fimc_is_hw_get_sensor_max_framerate(struct fimc_is *is); +void fimc_is_set_initial_params(struct fimc_is *is); +unsigned int __get_pending_param_count(struct fimc_is *is); + +int __is_hw_update_params(struct fimc_is *is); +void __is_get_frame_size(struct fimc_is *is, struct v4l2_mbus_framefmt *mf); +void __is_set_frame_size(struct fimc_is *is, struct v4l2_mbus_framefmt *mf); +void __is_set_sensor(struct fimc_is *is, int fps); +void __is_set_isp_aa_ae(struct fimc_is *is); +void __is_set_isp_flash(struct fimc_is *is, u32 cmd, u32 redeye); +void __is_set_isp_awb(struct fimc_is *is, u32 cmd, u32 val); +void __is_set_isp_effect(struct fimc_is *is, u32 cmd); +void __is_set_isp_iso(struct fimc_is *is, u32 cmd, u32 val); +void __is_set_isp_adjust(struct fimc_is *is, u32 cmd, u32 val); +void __is_set_isp_metering(struct fimc_is *is, u32 id, u32 val); +void __is_set_isp_afc(struct fimc_is *is, u32 cmd, u32 val); +void __is_set_drc_control(struct fimc_is *is, u32 val); +void __is_set_fd_control(struct fimc_is *is, u32 val); +void __is_set_fd_config_maxface(struct fimc_is *is, u32 val); +void __is_set_fd_config_rollangle(struct fimc_is *is, u32 val); +void __is_set_fd_config_yawangle(struct fimc_is *is, u32 val); +void __is_set_fd_config_smilemode(struct fimc_is *is, u32 val); +void __is_set_fd_config_blinkmode(struct fimc_is *is, u32 val); +void __is_set_fd_config_eyedetect(struct fimc_is *is, u32 val); +void __is_set_fd_config_mouthdetect(struct fimc_is *is, u32 val); +void __is_set_fd_config_orientation(struct fimc_is *is, u32 val); +void __is_set_fd_config_orientation_val(struct fimc_is *is, u32 val); +void __is_set_isp_aa_af_mode(struct fimc_is *is, int cmd); +void __is_set_isp_aa_af_start_stop(struct fimc_is *is, int cmd); + +#endif diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.c b/drivers/media/platform/exynos4-is/fimc-is-regs.c new file mode 100644 index 00000000..d05eaa2c --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-regs.c @@ -0,0 +1,243 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd. + * + * Authors: Younghwan Joo + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +#include "fimc-is.h" +#include "fimc-is-command.h" +#include "fimc-is-regs.h" +#include "fimc-is-sensor.h" + +void fimc_is_fw_clear_irq1(struct fimc_is *is, unsigned int nr) +{ + mcuctl_write(1UL << nr, is, MCUCTL_REG_INTCR1); +} + +void fimc_is_fw_clear_irq2(struct fimc_is *is) +{ + u32 cfg = mcuctl_read(is, MCUCTL_REG_INTSR2); + mcuctl_write(cfg, is, MCUCTL_REG_INTCR2); +} + +void fimc_is_hw_set_intgr0_gd0(struct fimc_is *is) +{ + mcuctl_write(INTGR0_INTGD(0), is, MCUCTL_REG_INTGR0); +} + +int fimc_is_hw_wait_intsr0_intsd0(struct fimc_is *is) +{ + unsigned int timeout = 2000; + u32 cfg, status; + + cfg = mcuctl_read(is, MCUCTL_REG_INTSR0); + status = INTSR0_GET_INTSD(0, cfg); + + while (status) { + cfg = mcuctl_read(is, MCUCTL_REG_INTSR0); + status = INTSR0_GET_INTSD(0, cfg); + if (timeout == 0) { + dev_warn(&is->pdev->dev, "%s timeout\n", + __func__); + return -ETIME; + } + timeout--; + udelay(1); + } + return 0; +} + +int fimc_is_hw_wait_intmsr0_intmsd0(struct fimc_is *is) +{ + unsigned int timeout = 2000; + u32 cfg, status; + + cfg = mcuctl_read(is, MCUCTL_REG_INTMSR0); + status = INTMSR0_GET_INTMSD(0, cfg); + + while (status) { + cfg = mcuctl_read(is, MCUCTL_REG_INTMSR0); + status = INTMSR0_GET_INTMSD(0, cfg); + if (timeout == 0) { + dev_warn(&is->pdev->dev, "%s timeout\n", + __func__); + return -ETIME; + } + timeout--; + udelay(1); + } + return 0; +} + +int fimc_is_hw_set_param(struct fimc_is *is) +{ + struct chain_config *config = &is->config[is->config_index]; + unsigned int param_count = __get_pending_param_count(is); + + fimc_is_hw_wait_intmsr0_intmsd0(is); + + mcuctl_write(HIC_SET_PARAMETER, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + mcuctl_write(is->config_index, is, MCUCTL_REG_ISSR(2)); + + mcuctl_write(param_count, is, MCUCTL_REG_ISSR(3)); + mcuctl_write(config->p_region_index1, is, MCUCTL_REG_ISSR(4)); + mcuctl_write(config->p_region_index2, is, MCUCTL_REG_ISSR(5)); + + fimc_is_hw_set_intgr0_gd0(is); + return 0; +} + +int fimc_is_hw_set_tune(struct fimc_is *is) +{ + fimc_is_hw_wait_intmsr0_intmsd0(is); + + mcuctl_write(HIC_SET_TUNE, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + mcuctl_write(is->h2i_cmd.entry_id, is, MCUCTL_REG_ISSR(2)); + + fimc_is_hw_set_intgr0_gd0(is); + return 0; +} + +#define FIMC_IS_MAX_PARAMS 4 + +int fimc_is_hw_get_params(struct fimc_is *is, unsigned int num_args) +{ + int i; + + if (num_args > FIMC_IS_MAX_PARAMS) + return -EINVAL; + + is->i2h_cmd.num_args = num_args; + + for (i = 0; i < FIMC_IS_MAX_PARAMS; i++) { + if (i < num_args) + is->i2h_cmd.args[i] = mcuctl_read(is, + MCUCTL_REG_ISSR(12 + i)); + else + is->i2h_cmd.args[i] = 0; + } + return 0; +} + +void fimc_is_hw_set_sensor_num(struct fimc_is *is) +{ + pr_debug("setting sensor index to: %d\n", is->sensor_index); + + mcuctl_write(IH_REPLY_DONE, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + mcuctl_write(IHC_GET_SENSOR_NUM, is, MCUCTL_REG_ISSR(2)); + mcuctl_write(FIMC_IS_SENSOR_NUM, is, MCUCTL_REG_ISSR(3)); +} + +void fimc_is_hw_close_sensor(struct fimc_is *is, unsigned int index) +{ + if (is->sensor_index != index) + return; + + fimc_is_hw_wait_intmsr0_intmsd0(is); + mcuctl_write(HIC_CLOSE_SENSOR, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(2)); + fimc_is_hw_set_intgr0_gd0(is); +} + +void fimc_is_hw_get_setfile_addr(struct fimc_is *is) +{ + fimc_is_hw_wait_intmsr0_intmsd0(is); + mcuctl_write(HIC_GET_SET_FILE_ADDR, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + fimc_is_hw_set_intgr0_gd0(is); +} + +void fimc_is_hw_load_setfile(struct fimc_is *is) +{ + fimc_is_hw_wait_intmsr0_intmsd0(is); + mcuctl_write(HIC_LOAD_SET_FILE, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + fimc_is_hw_set_intgr0_gd0(is); +} + +int fimc_is_hw_change_mode(struct fimc_is *is) +{ + const u8 cmd[] = { + HIC_PREVIEW_STILL, HIC_PREVIEW_VIDEO, + HIC_CAPTURE_STILL, HIC_CAPTURE_VIDEO, + }; + + if (WARN_ON(is->config_index >= ARRAY_SIZE(cmd))) + return -EINVAL; + + mcuctl_write(cmd[is->config_index], is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + mcuctl_write(is->setfile.sub_index, is, MCUCTL_REG_ISSR(2)); + fimc_is_hw_set_intgr0_gd0(is); + return 0; +} + +void fimc_is_hw_stream_on(struct fimc_is *is) +{ + fimc_is_hw_wait_intmsr0_intmsd0(is); + mcuctl_write(HIC_STREAM_ON, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + mcuctl_write(0, is, MCUCTL_REG_ISSR(2)); + fimc_is_hw_set_intgr0_gd0(is); +} + +void fimc_is_hw_stream_off(struct fimc_is *is) +{ + fimc_is_hw_wait_intmsr0_intmsd0(is); + mcuctl_write(HIC_STREAM_OFF, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + fimc_is_hw_set_intgr0_gd0(is); +} + +void fimc_is_hw_subip_power_off(struct fimc_is *is) +{ + fimc_is_hw_wait_intmsr0_intmsd0(is); + mcuctl_write(HIC_POWER_DOWN, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + fimc_is_hw_set_intgr0_gd0(is); +} + +int fimc_is_itf_s_param(struct fimc_is *is, bool update) +{ + int ret; + + if (update) + __is_hw_update_params(is); + + fimc_is_mem_barrier(); + + clear_bit(IS_ST_BLOCK_CMD_CLEARED, &is->state); + fimc_is_hw_set_param(is); + ret = fimc_is_wait_event(is, IS_ST_BLOCK_CMD_CLEARED, 1, + FIMC_IS_CONFIG_TIMEOUT); + if (ret < 0) + dev_err(&is->pdev->dev, "%s() timeout\n", __func__); + + return ret; +} + +int fimc_is_itf_mode_change(struct fimc_is *is) +{ + int ret; + + clear_bit(IS_ST_CHANGE_MODE, &is->state); + fimc_is_hw_change_mode(is); + ret = fimc_is_wait_event(is, IS_ST_CHANGE_MODE, 1, + FIMC_IS_CONFIG_TIMEOUT); + if (!ret < 0) + dev_err(&is->pdev->dev, "%s(): mode change (%d) timeout\n", + __func__, is->config_index); + return ret; +} diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.h b/drivers/media/platform/exynos4-is/fimc-is-regs.h new file mode 100644 index 00000000..5fa2fda4 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-regs.h @@ -0,0 +1,164 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Authors: Sylwester Nawrocki + * Younghwan Joo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef FIMC_IS_REG_H_ +#define FIMC_IS_REG_H_ + +/* WDT_ISP register */ +#define REG_WDT_ISP 0x00170000 + +/* MCUCTL registers base offset */ +#define MCUCTL_BASE 0x00180000 + +/* MCU Controller Register */ +#define MCUCTL_REG_MCUCTRL (MCUCTL_BASE + 0x00) +#define MCUCTRL_MSWRST (1 << 0) + +/* Boot Base Offset Address Register */ +#define MCUCTL_REG_BBOAR (MCUCTL_BASE + 0x04) + +/* Interrupt Generation Register 0 from Host CPU to VIC */ +#define MCUCTL_REG_INTGR0 (MCUCTL_BASE + 0x08) +/* __n = 0...9 */ +#define INTGR0_INTGC(__n) (1 << ((__n) + 16)) +/* __n = 0...5 */ +#define INTGR0_INTGD(__n) (1 << (__n)) + +/* Interrupt Clear Register 0 from Host CPU to VIC */ +#define MCUCTL_REG_INTCR0 (MCUCTL_BASE + 0x0c) +/* __n = 0...9 */ +#define INTCR0_INTGC(__n) (1 << ((__n) + 16)) +/* __n = 0...5 */ +#define INTCR0_INTCD(__n) (1 << ((__n) + 16)) + +/* Interrupt Mask Register 0 from Host CPU to VIC */ +#define MCUCTL_REG_INTMR0 (MCUCTL_BASE + 0x10) +/* __n = 0...9 */ +#define INTMR0_INTMC(__n) (1 << ((__n) + 16)) +/* __n = 0...5 */ +#define INTMR0_INTMD(__n) (1 << (__n)) + +/* Interrupt Status Register 0 from Host CPU to VIC */ +#define MCUCTL_REG_INTSR0 (MCUCTL_BASE + 0x14) +/* __n (bit number) = 0...4 */ +#define INTSR0_GET_INTSD(x, __n) (((x) >> (__n)) & 0x1) +/* __n (bit number) = 0...9 */ +#define INTSR0_GET_INTSC(x, __n) (((x) >> ((__n) + 16)) & 0x1) + +/* Interrupt Mask Status Register 0 from Host CPU to VIC */ +#define MCUCTL_REG_INTMSR0 (MCUCTL_BASE + 0x18) +/* __n (bit number) = 0...4 */ +#define INTMSR0_GET_INTMSD(x, __n) (((x) >> (__n)) & 0x1) +/* __n (bit number) = 0...9 */ +#define INTMSR0_GET_INTMSC(x, __n) (((x) >> ((__n) + 16)) & 0x1) + +/* Interrupt Generation Register 1 from ISP CPU to Host IC */ +#define MCUCTL_REG_INTGR1 (MCUCTL_BASE + 0x1c) +/* __n = 0...9 */ +#define INTGR1_INTGC(__n) (1 << (__n)) + +/* Interrupt Clear Register 1 from ISP CPU to Host IC */ +#define MCUCTL_REG_INTCR1 (MCUCTL_BASE + 0x20) +/* __n = 0...9 */ +#define INTCR1_INTCC(__n) (1 << (__n)) + +/* Interrupt Mask Register 1 from ISP CPU to Host IC */ +#define MCUCTL_REG_INTMR1 (MCUCTL_BASE + 0x24) +/* __n = 0...9 */ +#define INTMR1_INTMC(__n) (1 << (__n)) + +/* Interrupt Status Register 1 from ISP CPU to Host IC */ +#define MCUCTL_REG_INTSR1 (MCUCTL_BASE + 0x28) +/* Interrupt Mask Status Register 1 from ISP CPU to Host IC */ +#define MCUCTL_REG_INTMSR1 (MCUCTL_BASE + 0x2c) + +/* Interrupt Clear Register 2 from ISP BLK's interrupts to Host IC */ +#define MCUCTL_REG_INTCR2 (MCUCTL_BASE + 0x30) +/* __n = 0...5 */ +#define INTCR2_INTCC(__n) (1 << ((__n) + 16)) + +/* Interrupt Mask Register 2 from ISP BLK's interrupts to Host IC */ +#define MCUCTL_REG_INTMR2 (MCUCTL_BASE + 0x34) +/* __n = 0...25 */ +#define INTMR2_INTMCIS(__n) (1 << (__n)) + +/* Interrupt Status Register 2 from ISP BLK's interrupts to Host IC */ +#define MCUCTL_REG_INTSR2 (MCUCTL_BASE + 0x38) +/* Interrupt Mask Status Register 2 from ISP BLK's interrupts to Host IC */ +#define MCUCTL_REG_INTMSR2 (MCUCTL_BASE + 0x3c) + +/* General Purpose Output Control Register (0~17) */ +#define MCUCTL_REG_GPOCTLR (MCUCTL_BASE + 0x40) +/* __n = 0...17 */ +#define GPOCTLR_GPOG(__n) (1 << (__n)) + +/* General Purpose Pad Output Enable Register (0~17) */ +#define MCUCTL_REG_GPOENCTLR (MCUCTL_BASE + 0x44) +/* __n = 0...17 */ +#define GPOENCTLR_GPOEN(__n) (1 << (__n)) + +/* General Purpose Input Control Register (0~17) */ +#define MCUCTL_REG_GPICTLR (MCUCTL_BASE + 0x48) + +/* Shared registers between ISP CPU and the host CPU - ISSRxx */ + +/* ISSR(1): Command Host -> IS */ +/* ISSR(1): Sensor ID for Command, ISSR2...5 = Parameter 1...4 */ + +/* ISSR(10): Reply IS -> Host */ +/* ISSR(11): Sensor ID for Reply, ISSR12...15 = Parameter 1...4 */ + +/* ISSR(20): ISP_FRAME_DONE : SENSOR ID */ +/* ISSR(21): ISP_FRAME_DONE : PARAMETER 1 */ + +/* ISSR(24): SCALERC_FRAME_DONE : SENSOR ID */ +/* ISSR(25): SCALERC_FRAME_DONE : PARAMETER 1 */ + +/* ISSR(28): 3DNR_FRAME_DONE : SENSOR ID */ +/* ISSR(29): 3DNR_FRAME_DONE : PARAMETER 1 */ + +/* ISSR(32): SCALERP_FRAME_DONE : SENSOR ID */ +/* ISSR(33): SCALERP_FRAME_DONE : PARAMETER 1 */ + +/* __n = 0...63 */ +#define MCUCTL_REG_ISSR(__n) (MCUCTL_BASE + 0x80 + ((__n) * 4)) + +/* PMU ISP register offsets */ +#define REG_CMU_RESET_ISP_SYS_PWR_REG 0x1174 +#define REG_CMU_SYSCLK_ISP_SYS_PWR_REG 0x13b8 +#define REG_PMU_ISP_ARM_SYS 0x1050 +#define REG_PMU_ISP_ARM_CONFIGURATION 0x2280 +#define REG_PMU_ISP_ARM_STATUS 0x2284 +#define REG_PMU_ISP_ARM_OPTION 0x2288 + +void fimc_is_fw_clear_irq1(struct fimc_is *is, unsigned int bit); +void fimc_is_fw_clear_irq2(struct fimc_is *is); +int fimc_is_hw_get_params(struct fimc_is *is, unsigned int num); + +void fimc_is_hw_set_intgr0_gd0(struct fimc_is *is); +int fimc_is_hw_wait_intsr0_intsd0(struct fimc_is *is); +int fimc_is_hw_wait_intmsr0_intmsd0(struct fimc_is *is); +void fimc_is_hw_set_sensor_num(struct fimc_is *is); +void fimc_is_hw_stream_on(struct fimc_is *is); +void fimc_is_hw_stream_off(struct fimc_is *is); +int fimc_is_hw_set_param(struct fimc_is *is); +int fimc_is_hw_change_mode(struct fimc_is *is); + +void fimc_is_hw_close_sensor(struct fimc_is *is, unsigned int index); +void fimc_is_hw_get_setfile_addr(struct fimc_is *is); +void fimc_is_hw_load_setfile(struct fimc_is *is); +void fimc_is_hw_subip_power_off(struct fimc_is *is); + +int fimc_is_itf_s_param(struct fimc_is *is, bool update); +int fimc_is_itf_mode_change(struct fimc_is *is); + +#endif /* FIMC_IS_REG_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.c b/drivers/media/platform/exynos4-is/fimc-is-sensor.c new file mode 100644 index 00000000..6647421e --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.c @@ -0,0 +1,305 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Author: Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fimc-is.h" +#include "fimc-is-sensor.h" + +#define DRIVER_NAME "FIMC-IS-SENSOR" + +static const char * const sensor_supply_names[] = { + "svdda", + "svddio", +}; + +static const struct v4l2_mbus_framefmt fimc_is_sensor_formats[] = { + { + .code = V4L2_MBUS_FMT_SGRBG10_1X10, + .colorspace = V4L2_COLORSPACE_SRGB, + .field = V4L2_FIELD_NONE, + } +}; + +static const struct v4l2_mbus_framefmt *find_sensor_format( + struct v4l2_mbus_framefmt *mf) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(fimc_is_sensor_formats); i++) + if (mf->code == fimc_is_sensor_formats[i].code) + return &fimc_is_sensor_formats[i]; + + return &fimc_is_sensor_formats[0]; +} + +static int fimc_is_sensor_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(fimc_is_sensor_formats)) + return -EINVAL; + + code->code = fimc_is_sensor_formats[code->index].code; + return 0; +} + +static void fimc_is_sensor_try_format(struct fimc_is_sensor *sensor, + struct v4l2_mbus_framefmt *mf) +{ + const struct sensor_drv_data *dd = sensor->drvdata; + const struct v4l2_mbus_framefmt *fmt; + + fmt = find_sensor_format(mf); + mf->code = fmt->code; + v4l_bound_align_image(&mf->width, 16 + 8, dd->width, 0, + &mf->height, 12 + 8, dd->height, 0, 0); +} + +static struct v4l2_mbus_framefmt *__fimc_is_sensor_get_format( + struct fimc_is_sensor *sensor, struct v4l2_subdev_fh *fh, + u32 pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL; + + return &sensor->format; +} + +static int fimc_is_sensor_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd); + struct v4l2_mbus_framefmt *mf; + + fimc_is_sensor_try_format(sensor, &fmt->format); + + mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which); + if (mf) { + mutex_lock(&sensor->lock); + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + *mf = fmt->format; + mutex_unlock(&sensor->lock); + } + return 0; +} + +static int fimc_is_sensor_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd); + struct v4l2_mbus_framefmt *mf; + + mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which); + + mutex_lock(&sensor->lock); + fmt->format = *mf; + mutex_unlock(&sensor->lock); + return 0; +} + +static struct v4l2_subdev_pad_ops fimc_is_sensor_pad_ops = { + .enum_mbus_code = fimc_is_sensor_enum_mbus_code, + .get_fmt = fimc_is_sensor_get_fmt, + .set_fmt = fimc_is_sensor_set_fmt, +}; + +static int fimc_is_sensor_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); + + *format = fimc_is_sensor_formats[0]; + format->width = FIMC_IS_SENSOR_DEF_PIX_WIDTH; + format->height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT; + + return 0; +} + +static const struct v4l2_subdev_internal_ops fimc_is_sensor_sd_internal_ops = { + .open = fimc_is_sensor_open, +}; + +static int fimc_is_sensor_s_power(struct v4l2_subdev *sd, int on) +{ + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd); + int gpio = sensor->gpio_reset; + int ret; + + if (on) { + ret = pm_runtime_get(sensor->dev); + if (ret < 0) + return ret; + + ret = regulator_bulk_enable(SENSOR_NUM_SUPPLIES, + sensor->supplies); + if (ret < 0) { + pm_runtime_put(sensor->dev); + return ret; + } + if (gpio_is_valid(gpio)) { + gpio_set_value(gpio, 1); + usleep_range(600, 800); + gpio_set_value(gpio, 0); + usleep_range(10000, 11000); + gpio_set_value(gpio, 1); + } + + /* A delay needed for the sensor initialization. */ + msleep(20); + } else { + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, 0); + + ret = regulator_bulk_disable(SENSOR_NUM_SUPPLIES, + sensor->supplies); + if (!ret) + pm_runtime_put(sensor->dev); + } + + pr_info("%s:%d: on: %d, ret: %d\n", __func__, __LINE__, on, ret); + + return ret; +} + +static struct v4l2_subdev_core_ops fimc_is_sensor_core_ops = { + .s_power = fimc_is_sensor_s_power, +}; + +static struct v4l2_subdev_ops fimc_is_sensor_subdev_ops = { + .core = &fimc_is_sensor_core_ops, + .pad = &fimc_is_sensor_pad_ops, +}; + +static const struct of_device_id fimc_is_sensor_of_match[]; + +static int fimc_is_sensor_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct fimc_is_sensor *sensor; + const struct of_device_id *of_id; + struct v4l2_subdev *sd; + int gpio, i, ret; + + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + mutex_init(&sensor->lock); + sensor->gpio_reset = -EINVAL; + + gpio = of_get_gpio_flags(dev->of_node, 0, NULL); + if (gpio_is_valid(gpio)) { + ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW, + DRIVER_NAME); + if (ret < 0) + return ret; + } + sensor->gpio_reset = gpio; + + for (i = 0; i < SENSOR_NUM_SUPPLIES; i++) + sensor->supplies[i].supply = sensor_supply_names[i]; + + ret = devm_regulator_bulk_get(&client->dev, SENSOR_NUM_SUPPLIES, + sensor->supplies); + if (ret < 0) + return ret; + + of_id = of_match_node(fimc_is_sensor_of_match, dev->of_node); + if (!of_id) + return -ENODEV; + + sensor->drvdata = of_id->data; + sensor->dev = dev; + + sd = &sensor->subdev; + v4l2_i2c_subdev_init(sd, client, &fimc_is_sensor_subdev_ops); + snprintf(sd->name, sizeof(sd->name), sensor->drvdata->subdev_name); + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + sensor->format.code = fimc_is_sensor_formats[0].code; + sensor->format.width = FIMC_IS_SENSOR_DEF_PIX_WIDTH; + sensor->format.height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT; + + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0); + if (ret < 0) + return ret; + + pm_runtime_no_callbacks(dev); + pm_runtime_enable(dev); + + return ret; +} + +static int fimc_is_sensor_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + media_entity_cleanup(&sd->entity); + return 0; +} + +static const struct i2c_device_id fimc_is_sensor_ids[] = { + { } +}; + +static const struct sensor_drv_data s5k6a3_drvdata = { + .id = FIMC_IS_SENSOR_ID_S5K6A3, + .subdev_name = "S5K6A3", + .width = S5K6A3_SENSOR_WIDTH, + .height = S5K6A3_SENSOR_HEIGHT, +}; + +static const struct of_device_id fimc_is_sensor_of_match[] = { + { + .compatible = "samsung,s5k6a3", + .data = &s5k6a3_drvdata, + }, + { } +}; + +static struct i2c_driver fimc_is_sensor_driver = { + .driver = { + .of_match_table = fimc_is_sensor_of_match, + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = fimc_is_sensor_probe, + .remove = fimc_is_sensor_remove, + .id_table = fimc_is_sensor_ids, +}; + +int fimc_is_register_sensor_driver(void) +{ + return i2c_add_driver(&fimc_is_sensor_driver); +} + +void fimc_is_unregister_sensor_driver(void) +{ + i2c_del_driver(&fimc_is_sensor_driver); +} + +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_DESCRIPTION("Exynos4x12 FIMC-IS image sensor subdev driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.h b/drivers/media/platform/exynos4-is/fimc-is-sensor.h new file mode 100644 index 00000000..6036d49a --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.h @@ -0,0 +1,89 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Authors: Sylwester Nawrocki + * Younghwan Joo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef FIMC_IS_SENSOR_H_ +#define FIMC_IS_SENSOR_H_ + +#include +#include +#include +#include +#include +#include +#include + +#define FIMC_IS_SENSOR_OPEN_TIMEOUT 2000 /* ms */ + +#define FIMC_IS_SENSOR_DEF_PIX_WIDTH 1296 +#define FIMC_IS_SENSOR_DEF_PIX_HEIGHT 732 + +#define S5K6A3_SENSOR_WIDTH 1392 +#define S5K6A3_SENSOR_HEIGHT 1392 + +#define SENSOR_NUM_SUPPLIES 2 + +enum fimc_is_sensor_id { + FIMC_IS_SENSOR_ID_S5K3H2 = 1, + FIMC_IS_SENSOR_ID_S5K6A3, + FIMC_IS_SENSOR_ID_S5K4E5, + FIMC_IS_SENSOR_ID_S5K3H7, + FIMC_IS_SENSOR_ID_CUSTOM, + FIMC_IS_SENSOR_ID_END +}; + +#define IS_SENSOR_CTRL_BUS_I2C0 0 +#define IS_SENSOR_CTRL_BUS_I2C1 1 + +struct sensor_drv_data { + enum fimc_is_sensor_id id; + const char * const subdev_name; + unsigned int width; + unsigned int height; +}; + +/** + * struct fimc_is_sensor - fimc-is sensor data structure + * @dev: pointer to this I2C client device structure + * @subdev: the image sensor's v4l2 subdev + * @pad: subdev media source pad + * @supplies: image sensor's voltage regulator supplies + * @gpio_reset: GPIO connected to the sensor's reset pin + * @drvdata: a pointer to the sensor's parameters data structure + * @i2c_bus: ISP I2C bus index (0...1) + * @test_pattern: true to enable video test pattern + * @lock: mutex protecting the structure's members below + * @format: media bus format at the sensor's source pad + */ +struct fimc_is_sensor { + struct device *dev; + struct v4l2_subdev subdev; + struct media_pad pad; + struct regulator_bulk_data supplies[SENSOR_NUM_SUPPLIES]; + int gpio_reset; + const struct sensor_drv_data *drvdata; + unsigned int i2c_bus; + bool test_pattern; + + struct mutex lock; + struct v4l2_mbus_framefmt format; +}; + +static inline +struct fimc_is_sensor *sd_to_fimc_is_sensor(struct v4l2_subdev *sd) +{ + return container_of(sd, struct fimc_is_sensor, subdev); +} + +int fimc_is_register_sensor_driver(void); +void fimc_is_unregister_sensor_driver(void); + +#endif /* FIMC_IS_SENSOR_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c new file mode 100644 index 00000000..0741945b --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -0,0 +1,995 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Authors: Sylwester Nawrocki + * Younghwan Joo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define pr_fmt(fmt) "%s:%d " fmt, __func__, __LINE__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "media-dev.h" +#include "fimc-is.h" +#include "fimc-is-command.h" +#include "fimc-is-errno.h" +#include "fimc-is-i2c.h" +#include "fimc-is-param.h" +#include "fimc-is-regs.h" + + +static char *fimc_is_clocks[ISS_CLKS_MAX] = { + [ISS_CLK_PPMUISPX] = "ppmuispx", + [ISS_CLK_PPMUISPMX] = "ppmuispmx", + [ISS_CLK_LITE0] = "lite0", + [ISS_CLK_LITE1] = "lite1", + [ISS_CLK_MPLL] = "mpll", + [ISS_CLK_ISP] = "isp", + [ISS_CLK_DRC] = "drc", + [ISS_CLK_FD] = "fd", + [ISS_CLK_MCUISP] = "mcuisp", + [ISS_CLK_UART] = "uart", + [ISS_CLK_ISP_DIV0] = "ispdiv0", + [ISS_CLK_ISP_DIV1] = "ispdiv1", + [ISS_CLK_MCUISP_DIV0] = "mcuispdiv0", + [ISS_CLK_MCUISP_DIV1] = "mcuispdiv1", + [ISS_CLK_ACLK200] = "aclk200", + [ISS_CLK_ACLK200_DIV] = "div_aclk200", + [ISS_CLK_ACLK400MCUISP] = "aclk400mcuisp", + [ISS_CLK_ACLK400MCUISP_DIV] = "div_aclk400mcuisp", +}; + +static void fimc_is_put_clocks(struct fimc_is *is) +{ + int i; + + for (i = 0; i < ISS_CLKS_MAX; i++) { + if (IS_ERR(is->clocks[i])) + continue; + clk_put(is->clocks[i]); + is->clocks[i] = ERR_PTR(-EINVAL); + } +} + +static int fimc_is_get_clocks(struct fimc_is *is) +{ + int i, ret; + + for (i = 0; i < ISS_CLKS_MAX; i++) + is->clocks[i] = ERR_PTR(-EINVAL); + + for (i = 0; i < ISS_CLKS_MAX; i++) { + is->clocks[i] = clk_get(&is->pdev->dev, fimc_is_clocks[i]); + if (IS_ERR(is->clocks[i])) { + ret = PTR_ERR(is->clocks[i]); + goto err; + } + } + + return 0; +err: + fimc_is_put_clocks(is); + dev_err(&is->pdev->dev, "failed to get clock: %s\n", + fimc_is_clocks[i]); + return ret; +} + +static int fimc_is_setup_clocks(struct fimc_is *is) +{ + int ret; + + ret = clk_set_parent(is->clocks[ISS_CLK_ACLK200], + is->clocks[ISS_CLK_ACLK200_DIV]); + if (ret < 0) + return ret; + + ret = clk_set_parent(is->clocks[ISS_CLK_ACLK400MCUISP], + is->clocks[ISS_CLK_ACLK400MCUISP_DIV]); + if (ret < 0) + return ret; + + ret = clk_set_rate(is->clocks[ISS_CLK_ISP_DIV0], ACLK_AXI_FREQUENCY); + if (ret < 0) + return ret; + + ret = clk_set_rate(is->clocks[ISS_CLK_ISP_DIV1], ACLK_AXI_FREQUENCY); + if (ret < 0) + return ret; + + ret = clk_set_rate(is->clocks[ISS_CLK_MCUISP_DIV0], + ATCLK_MCUISP_FREQUENCY); + if (ret < 0) + return ret; + + return clk_set_rate(is->clocks[ISS_CLK_MCUISP_DIV1], + ATCLK_MCUISP_FREQUENCY); +} + +int fimc_is_enable_clocks(struct fimc_is *is) +{ + int i, ret; + + for (i = 0; i < ISS_GATE_CLKS_MAX; i++) { + if (IS_ERR(is->clocks[i])) + continue; + ret = clk_prepare_enable(is->clocks[i]); + if (ret < 0) { + dev_err(&is->pdev->dev, "clock %s enable failed\n", + fimc_is_clocks[i]); + for (--i; i >= 0; i--) + clk_disable(is->clocks[i]); + return ret; + } + pr_debug("enabled clock: %s\n", fimc_is_clocks[i]); + } + return 0; +} + +void fimc_is_disable_clocks(struct fimc_is *is) +{ + int i; + + for (i = 0; i < ISS_GATE_CLKS_MAX; i++) { + if (!IS_ERR(is->clocks[i])) { + clk_disable_unprepare(is->clocks[i]); + pr_debug("disabled clock: %s\n", fimc_is_clocks[i]); + } + } +} + +static int fimc_is_parse_sensor_config(struct fimc_is_sensor *sensor, + struct device_node *np) +{ + u32 tmp = 0; + int ret; + + np = v4l2_of_get_next_endpoint(np, NULL); + if (!np) + return -ENXIO; + np = v4l2_of_get_remote_port(np); + if (!np) + return -ENXIO; + + /* Use MIPI-CSIS channel id to determine the ISP I2C bus index. */ + ret = of_property_read_u32(np, "reg", &tmp); + sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0; + + return ret; +} + +static int fimc_is_register_subdevs(struct fimc_is *is) +{ + struct device_node *adapter, *child; + int ret; + + ret = fimc_isp_subdev_create(&is->isp); + if (ret < 0) + return ret; + + for_each_compatible_node(adapter, NULL, FIMC_IS_I2C_COMPATIBLE) { + if (!of_find_device_by_node(adapter)) { + of_node_put(adapter); + return -EPROBE_DEFER; + } + + for_each_available_child_of_node(adapter, child) { + struct i2c_client *client; + struct v4l2_subdev *sd; + + client = of_find_i2c_device_by_node(child); + if (!client) + goto e_retry; + + sd = i2c_get_clientdata(client); + if (!sd) + goto e_retry; + + /* FIXME: Add support for multiple sensors. */ + if (WARN_ON(is->sensor)) + continue; + + is->sensor = sd_to_fimc_is_sensor(sd); + + if (fimc_is_parse_sensor_config(is->sensor, child)) { + dev_warn(&is->pdev->dev, "DT parse error: %s\n", + child->full_name); + } + pr_debug("%s(): registered subdev: %p\n", + __func__, sd->name); + } + } + return 0; + +e_retry: + of_node_put(child); + return -EPROBE_DEFER; +} + +static int fimc_is_unregister_subdevs(struct fimc_is *is) +{ + fimc_isp_subdev_destroy(&is->isp); + is->sensor = NULL; + return 0; +} + +static int fimc_is_load_setfile(struct fimc_is *is, char *file_name) +{ + const struct firmware *fw; + void *buf; + int ret; + + ret = request_firmware(&fw, file_name, &is->pdev->dev); + if (ret < 0) { + dev_err(&is->pdev->dev, "firmware request failed (%d)\n", ret); + return ret; + } + buf = is->memory.vaddr + is->setfile.base; + memcpy(buf, fw->data, fw->size); + fimc_is_mem_barrier(); + is->setfile.size = fw->size; + + pr_debug("mem vaddr: %p, setfile buf: %p\n", is->memory.vaddr, buf); + + memcpy(is->fw.setfile_info, + fw->data + fw->size - FIMC_IS_SETFILE_INFO_LEN, + FIMC_IS_SETFILE_INFO_LEN - 1); + + is->fw.setfile_info[FIMC_IS_SETFILE_INFO_LEN - 1] = '\0'; + is->setfile.state = 1; + + pr_debug("FIMC-IS setfile loaded: base: %#x, size: %zu B\n", + is->setfile.base, fw->size); + + release_firmware(fw); + return ret; +} + +int fimc_is_cpu_set_power(struct fimc_is *is, int on) +{ + unsigned int timeout = FIMC_IS_POWER_ON_TIMEOUT; + + if (on) { + /* Disable watchdog */ + mcuctl_write(0, is, REG_WDT_ISP); + + /* Cortex-A5 start address setting */ + mcuctl_write(is->memory.paddr, is, MCUCTL_REG_BBOAR); + + /* Enable and start Cortex-A5 */ + pmuisp_write(0x18000, is, REG_PMU_ISP_ARM_OPTION); + pmuisp_write(0x1, is, REG_PMU_ISP_ARM_CONFIGURATION); + } else { + /* A5 power off */ + pmuisp_write(0x10000, is, REG_PMU_ISP_ARM_OPTION); + pmuisp_write(0x0, is, REG_PMU_ISP_ARM_CONFIGURATION); + + while (pmuisp_read(is, REG_PMU_ISP_ARM_STATUS) & 1) { + if (timeout == 0) + return -ETIME; + timeout--; + udelay(1); + } + } + + return 0; +} + +/* Wait until @bit of @is->state is set to @state in the interrupt handler. */ +int fimc_is_wait_event(struct fimc_is *is, unsigned long bit, + unsigned int state, unsigned int timeout) +{ + + int ret = wait_event_timeout(is->irq_queue, + !state ^ test_bit(bit, &is->state), + timeout); + if (ret == 0) { + dev_WARN(&is->pdev->dev, "%s() timed out\n", __func__); + return -ETIME; + } + return 0; +} + +int fimc_is_start_firmware(struct fimc_is *is) +{ + struct device *dev = &is->pdev->dev; + int ret; + + if (is->fw.f_w == NULL) { + dev_err(dev, "firmware is not loaded\n"); + return -EINVAL; + } + + memcpy(is->memory.vaddr, is->fw.f_w->data, is->fw.f_w->size); + wmb(); + + ret = fimc_is_cpu_set_power(is, 1); + if (ret < 0) + return ret; + + ret = fimc_is_wait_event(is, IS_ST_A5_PWR_ON, 1, + msecs_to_jiffies(FIMC_IS_FW_LOAD_TIMEOUT)); + if (ret < 0) + dev_err(dev, "FIMC-IS CPU power on failed\n"); + + return ret; +} + +/* Allocate working memory for the FIMC-IS CPU. */ +static int fimc_is_alloc_cpu_memory(struct fimc_is *is) +{ + struct device *dev = &is->pdev->dev; + + is->memory.vaddr = dma_alloc_coherent(dev, FIMC_IS_CPU_MEM_SIZE, + &is->memory.paddr, GFP_KERNEL); + if (is->memory.vaddr == NULL) + return -ENOMEM; + + is->memory.size = FIMC_IS_CPU_MEM_SIZE; + memset(is->memory.vaddr, 0, is->memory.size); + + dev_info(dev, "FIMC-IS CPU memory base: %#x\n", (u32)is->memory.paddr); + + if (((u32)is->memory.paddr) & FIMC_IS_FW_ADDR_MASK) { + dev_err(dev, "invalid firmware memory alignment: %#x\n", + (u32)is->memory.paddr); + dma_free_coherent(dev, is->memory.size, is->memory.vaddr, + is->memory.paddr); + return -EIO; + } + + is->is_p_region = (struct is_region *)(is->memory.vaddr + + FIMC_IS_CPU_MEM_SIZE - FIMC_IS_REGION_SIZE); + + is->is_dma_p_region = is->memory.paddr + + FIMC_IS_CPU_MEM_SIZE - FIMC_IS_REGION_SIZE; + + is->is_shared_region = (struct is_share_region *)(is->memory.vaddr + + FIMC_IS_SHARED_REGION_OFFSET); + return 0; +} + +static void fimc_is_free_cpu_memory(struct fimc_is *is) +{ + struct device *dev = &is->pdev->dev; + + dma_free_coherent(dev, is->memory.size, is->memory.vaddr, + is->memory.paddr); +} + +static void fimc_is_load_firmware(const struct firmware *fw, void *context) +{ + struct fimc_is *is = context; + struct device *dev = &is->pdev->dev; + void *buf; + int ret; + + if (fw == NULL) { + dev_err(dev, "firmware request failed\n"); + return; + } + mutex_lock(&is->lock); + + if (fw->size < FIMC_IS_FW_SIZE_MIN || fw->size > FIMC_IS_FW_SIZE_MAX) { + dev_err(dev, "wrong firmware size: %d\n", fw->size); + goto done; + } + + is->fw.size = fw->size; + + ret = fimc_is_alloc_cpu_memory(is); + if (ret < 0) { + dev_err(dev, "failed to allocate FIMC-IS CPU memory\n"); + goto done; + } + + memcpy(is->memory.vaddr, fw->data, fw->size); + wmb(); + + /* Read firmware description. */ + buf = (void *)(is->memory.vaddr + fw->size - FIMC_IS_FW_DESC_LEN); + memcpy(&is->fw.info, buf, FIMC_IS_FW_INFO_LEN); + is->fw.info[FIMC_IS_FW_INFO_LEN] = 0; + + buf = (void *)(is->memory.vaddr + fw->size - FIMC_IS_FW_VER_LEN); + memcpy(&is->fw.version, buf, FIMC_IS_FW_VER_LEN); + is->fw.version[FIMC_IS_FW_VER_LEN - 1] = 0; + + is->fw.state = 1; + + dev_info(dev, "loaded firmware: %s, rev. %s\n", + is->fw.info, is->fw.version); + dev_dbg(dev, "FW size: %d, paddr: %#x\n", fw->size, is->memory.paddr); + + is->is_shared_region->chip_id = 0xe4412; + is->is_shared_region->chip_rev_no = 1; + + fimc_is_mem_barrier(); + + /* + * FIXME: The firmware is not being released for now, as it is + * needed around for copying to the IS working memory every + * time before the Cortex-A5 is restarted. + */ + if (is->fw.f_w) + release_firmware(is->fw.f_w); + is->fw.f_w = fw; +done: + mutex_unlock(&is->lock); +} + +static int fimc_is_request_firmware(struct fimc_is *is, const char *fw_name) +{ + return request_firmware_nowait(THIS_MODULE, + FW_ACTION_HOTPLUG, fw_name, &is->pdev->dev, + GFP_KERNEL, is, fimc_is_load_firmware); +} + +/* General IS interrupt handler */ +static void fimc_is_general_irq_handler(struct fimc_is *is) +{ + is->i2h_cmd.cmd = mcuctl_read(is, MCUCTL_REG_ISSR(10)); + + switch (is->i2h_cmd.cmd) { + case IHC_GET_SENSOR_NUM: + fimc_is_hw_get_params(is, 1); + fimc_is_hw_wait_intmsr0_intmsd0(is); + fimc_is_hw_set_sensor_num(is); + pr_debug("ISP FW version: %#x\n", is->i2h_cmd.args[0]); + break; + case IHC_SET_FACE_MARK: + case IHC_FRAME_DONE: + fimc_is_hw_get_params(is, 2); + break; + case IHC_SET_SHOT_MARK: + case IHC_AA_DONE: + case IH_REPLY_DONE: + fimc_is_hw_get_params(is, 3); + break; + case IH_REPLY_NOT_DONE: + fimc_is_hw_get_params(is, 4); + break; + case IHC_NOT_READY: + break; + default: + pr_info("unknown command: %#x\n", is->i2h_cmd.cmd); + } + + fimc_is_fw_clear_irq1(is, FIMC_IS_INT_GENERAL); + + switch (is->i2h_cmd.cmd) { + case IHC_GET_SENSOR_NUM: + fimc_is_hw_set_intgr0_gd0(is); + set_bit(IS_ST_A5_PWR_ON, &is->state); + break; + + case IHC_SET_SHOT_MARK: + break; + + case IHC_SET_FACE_MARK: + is->fd_header.count = is->i2h_cmd.args[0]; + is->fd_header.index = is->i2h_cmd.args[1]; + is->fd_header.offset = 0; + break; + + case IHC_FRAME_DONE: + break; + + case IHC_AA_DONE: + pr_debug("AA_DONE - %d, %d, %d\n", is->i2h_cmd.args[0], + is->i2h_cmd.args[1], is->i2h_cmd.args[2]); + break; + + case IH_REPLY_DONE: + pr_debug("ISR_DONE: args[0]: %#x\n", is->i2h_cmd.args[0]); + + switch (is->i2h_cmd.args[0]) { + case HIC_PREVIEW_STILL...HIC_CAPTURE_VIDEO: + /* Get CAC margin */ + set_bit(IS_ST_CHANGE_MODE, &is->state); + is->isp.cac_margin_x = is->i2h_cmd.args[1]; + is->isp.cac_margin_y = is->i2h_cmd.args[2]; + pr_debug("CAC margin (x,y): (%d,%d)\n", + is->isp.cac_margin_x, is->isp.cac_margin_y); + break; + + case HIC_STREAM_ON: + clear_bit(IS_ST_STREAM_OFF, &is->state); + set_bit(IS_ST_STREAM_ON, &is->state); + break; + + case HIC_STREAM_OFF: + clear_bit(IS_ST_STREAM_ON, &is->state); + set_bit(IS_ST_STREAM_OFF, &is->state); + break; + + case HIC_SET_PARAMETER: + is->config[is->config_index].p_region_index1 = 0; + is->config[is->config_index].p_region_index2 = 0; + set_bit(IS_ST_BLOCK_CMD_CLEARED, &is->state); + pr_debug("HIC_SET_PARAMETER\n"); + break; + + case HIC_GET_PARAMETER: + break; + + case HIC_SET_TUNE: + break; + + case HIC_GET_STATUS: + break; + + case HIC_OPEN_SENSOR: + set_bit(IS_ST_OPEN_SENSOR, &is->state); + pr_debug("data lanes: %d, settle line: %d\n", + is->i2h_cmd.args[2], is->i2h_cmd.args[1]); + break; + + case HIC_CLOSE_SENSOR: + clear_bit(IS_ST_OPEN_SENSOR, &is->state); + is->sensor_index = 0; + break; + + case HIC_MSG_TEST: + pr_debug("config MSG level completed\n"); + break; + + case HIC_POWER_DOWN: + clear_bit(IS_ST_PWR_SUBIP_ON, &is->state); + break; + + case HIC_GET_SET_FILE_ADDR: + is->setfile.base = is->i2h_cmd.args[1]; + set_bit(IS_ST_SETFILE_LOADED, &is->state); + break; + + case HIC_LOAD_SET_FILE: + set_bit(IS_ST_SETFILE_LOADED, &is->state); + break; + } + break; + + case IH_REPLY_NOT_DONE: + pr_err("ISR_NDONE: %d: %#x, %s\n", is->i2h_cmd.args[0], + is->i2h_cmd.args[1], + fimc_is_strerr(is->i2h_cmd.args[1])); + + if (is->i2h_cmd.args[1] & IS_ERROR_TIME_OUT_FLAG) + pr_err("IS_ERROR_TIME_OUT\n"); + + switch (is->i2h_cmd.args[1]) { + case IS_ERROR_SET_PARAMETER: + fimc_is_mem_barrier(); + } + + switch (is->i2h_cmd.args[0]) { + case HIC_SET_PARAMETER: + is->config[is->config_index].p_region_index1 = 0; + is->config[is->config_index].p_region_index2 = 0; + set_bit(IS_ST_BLOCK_CMD_CLEARED, &is->state); + break; + } + break; + + case IHC_NOT_READY: + pr_err("IS control sequence error: Not Ready\n"); + break; + } + + wake_up(&is->irq_queue); +} + +static irqreturn_t fimc_is_irq_handler(int irq, void *priv) +{ + struct fimc_is *is = priv; + unsigned long flags; + u32 status; + + spin_lock_irqsave(&is->slock, flags); + status = mcuctl_read(is, MCUCTL_REG_INTSR1); + + if (status & (1UL << FIMC_IS_INT_GENERAL)) + fimc_is_general_irq_handler(is); + + if (status & (1UL << FIMC_IS_INT_FRAME_DONE_ISP)) + fimc_isp_irq_handler(is); + + spin_unlock_irqrestore(&is->slock, flags); + return IRQ_HANDLED; +} + +static int fimc_is_hw_open_sensor(struct fimc_is *is, + struct fimc_is_sensor *sensor) +{ + struct sensor_open_extended *soe = (void *)&is->is_p_region->shared; + + fimc_is_hw_wait_intmsr0_intmsd0(is); + + soe->self_calibration_mode = 1; + soe->actuator_type = 0; + soe->mipi_lane_num = 0; + soe->mclk = 0; + soe->mipi_speed = 0; + soe->fast_open_sensor = 0; + soe->i2c_sclk = 88000000; + + fimc_is_mem_barrier(); + + mcuctl_write(HIC_OPEN_SENSOR, is, MCUCTL_REG_ISSR(0)); + mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); + mcuctl_write(sensor->drvdata->id, is, MCUCTL_REG_ISSR(2)); + mcuctl_write(sensor->i2c_bus, is, MCUCTL_REG_ISSR(3)); + mcuctl_write(is->is_dma_p_region, is, MCUCTL_REG_ISSR(4)); + + fimc_is_hw_set_intgr0_gd0(is); + + return fimc_is_wait_event(is, IS_ST_OPEN_SENSOR, 1, + FIMC_IS_SENSOR_OPEN_TIMEOUT); +} + + +int fimc_is_hw_initialize(struct fimc_is *is) +{ + const int config_ids[] = { + IS_SC_PREVIEW_STILL, IS_SC_PREVIEW_VIDEO, + IS_SC_CAPTURE_STILL, IS_SC_CAPTURE_VIDEO + }; + struct device *dev = &is->pdev->dev; + u32 prev_id; + int i, ret; + + /* Sensor initialization. */ + ret = fimc_is_hw_open_sensor(is, is->sensor); + if (ret < 0) + return ret; + + /* Get the setfile address. */ + fimc_is_hw_get_setfile_addr(is); + + ret = fimc_is_wait_event(is, IS_ST_SETFILE_LOADED, 1, + FIMC_IS_CONFIG_TIMEOUT); + if (ret < 0) { + dev_err(dev, "get setfile address timed out\n"); + return ret; + } + pr_debug("setfile.base: %#x\n", is->setfile.base); + + /* Load the setfile. */ + fimc_is_load_setfile(is, FIMC_IS_SETFILE_6A3); + clear_bit(IS_ST_SETFILE_LOADED, &is->state); + fimc_is_hw_load_setfile(is); + ret = fimc_is_wait_event(is, IS_ST_SETFILE_LOADED, 1, + FIMC_IS_CONFIG_TIMEOUT); + if (ret < 0) { + dev_err(dev, "loading setfile timed out\n"); + return ret; + } + + pr_debug("setfile: base: %#x, size: %d\n", + is->setfile.base, is->setfile.size); + pr_info("FIMC-IS Setfile info: %s\n", is->fw.setfile_info); + + /* Check magic number. */ + if (is->is_p_region->shared[MAX_SHARED_COUNT - 1] != + FIMC_IS_MAGIC_NUMBER) { + dev_err(dev, "magic number error!\n"); + return -EIO; + } + + pr_debug("shared region: %#x, parameter region: %#x\n", + is->memory.paddr + FIMC_IS_SHARED_REGION_OFFSET, + is->is_dma_p_region); + + is->setfile.sub_index = 0; + + /* Stream off. */ + fimc_is_hw_stream_off(is); + ret = fimc_is_wait_event(is, IS_ST_STREAM_OFF, 1, + FIMC_IS_CONFIG_TIMEOUT); + if (ret < 0) { + dev_err(dev, "stream off timeout\n"); + return ret; + } + + /* Preserve previous mode. */ + prev_id = is->config_index; + + /* Set initial parameter values. */ + for (i = 0; i < ARRAY_SIZE(config_ids); i++) { + is->config_index = config_ids[i]; + fimc_is_set_initial_params(is); + ret = fimc_is_itf_s_param(is, true); + if (ret < 0) { + is->config_index = prev_id; + return ret; + } + } + is->config_index = prev_id; + + set_bit(IS_ST_INIT_DONE, &is->state); + dev_info(dev, "initialization sequence completed (%d)\n", + is->config_index); + return 0; +} + +static int fimc_is_log_show(struct seq_file *s, void *data) +{ + struct fimc_is *is = s->private; + const u8 *buf = is->memory.vaddr + FIMC_IS_DEBUG_REGION_OFFSET; + + if (is->memory.vaddr == NULL) { + dev_err(&is->pdev->dev, "firmware memory is not initialized\n"); + return -EIO; + } + + seq_printf(s, "%s\n", buf); + return 0; +} + +static int fimc_is_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, fimc_is_log_show, inode->i_private); +} + +static const struct file_operations fimc_is_debugfs_fops = { + .open = fimc_is_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void fimc_is_debugfs_remove(struct fimc_is *is) +{ + debugfs_remove_recursive(is->debugfs_entry); + is->debugfs_entry = NULL; +} + +static int fimc_is_debugfs_create(struct fimc_is *is) +{ + struct dentry *dentry; + + is->debugfs_entry = debugfs_create_dir("fimc_is", NULL); + + dentry = debugfs_create_file("fw_log", S_IRUGO, is->debugfs_entry, + is, &fimc_is_debugfs_fops); + if (!dentry) + fimc_is_debugfs_remove(is); + + return is->debugfs_entry == NULL ? -EIO : 0; +} + +static int fimc_is_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct fimc_is *is; + struct resource res; + struct device_node *node; + int ret; + + is = devm_kzalloc(&pdev->dev, sizeof(*is), GFP_KERNEL); + if (!is) + return -ENOMEM; + + is->pdev = pdev; + is->isp.pdev = pdev; + + init_waitqueue_head(&is->irq_queue); + spin_lock_init(&is->slock); + mutex_init(&is->lock); + + ret = of_address_to_resource(dev->of_node, 0, &res); + if (ret < 0) + return ret; + + is->regs = devm_ioremap_resource(dev, &res); + if (IS_ERR(is->regs)) + return PTR_ERR(is->regs); + + node = of_get_child_by_name(dev->of_node, "pmu"); + if (!node) + return -ENODEV; + + is->pmu_regs = of_iomap(node, 0); + if (!is->pmu_regs) + return -ENOMEM; + + is->irq = irq_of_parse_and_map(dev->of_node, 0); + if (is->irq < 0) { + dev_err(dev, "no irq found\n"); + return is->irq; + } + + ret = fimc_is_get_clocks(is); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, is); + + ret = request_irq(is->irq, fimc_is_irq_handler, 0, dev_name(dev), is); + if (ret < 0) { + dev_err(dev, "irq request failed\n"); + goto err_clk; + } + pm_runtime_enable(dev); + + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto err_irq; + + is->alloc_ctx = vb2_dma_contig_init_ctx(dev); + if (IS_ERR(is->alloc_ctx)) { + ret = PTR_ERR(is->alloc_ctx); + goto err_irq; + } + /* + * Register FIMC-IS V4L2 subdevs to this driver. The video nodes + * will be created within the subdev's registered() callback. + */ + ret = fimc_is_register_subdevs(is); + if (ret < 0) + goto err_vb; + + ret = fimc_is_debugfs_create(is); + if (ret < 0) + goto err_sd; + + ret = fimc_is_request_firmware(is, FIMC_IS_FW_FILENAME); + if (ret < 0) + goto err_dfs; + + pm_runtime_put_sync(dev); + + dev_dbg(dev, "FIMC-IS registered successfully\n"); + return 0; + +err_dfs: + fimc_is_debugfs_remove(is); +err_vb: + vb2_dma_contig_cleanup_ctx(is->alloc_ctx); +err_sd: + fimc_is_unregister_subdevs(is); +err_irq: + free_irq(is->irq, is); +err_clk: + fimc_is_put_clocks(is); + return ret; +} + +static int fimc_is_runtime_resume(struct device *dev) +{ + struct fimc_is *is = dev_get_drvdata(dev); + int ret; + + ret = fimc_is_setup_clocks(is); + if (ret) + return ret; + + return fimc_is_enable_clocks(is); +} + +static int fimc_is_runtime_suspend(struct device *dev) +{ + struct fimc_is *is = dev_get_drvdata(dev); + + fimc_is_disable_clocks(is); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int fimc_is_resume(struct device *dev) +{ + /* TODO: */ + return 0; +} + +static int fimc_is_suspend(struct device *dev) +{ + struct fimc_is *is = dev_get_drvdata(dev); + + /* TODO: */ + if (test_bit(IS_ST_A5_PWR_ON, &is->state)) + return -EBUSY; + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static int fimc_is_remove(struct platform_device *pdev) +{ + struct fimc_is *is = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + free_irq(is->irq, is); + fimc_is_unregister_subdevs(is); + vb2_dma_contig_cleanup_ctx(is->alloc_ctx); + fimc_is_put_clocks(is); + fimc_is_debugfs_remove(is); + if (is->fw.f_w) + release_firmware(is->fw.f_w); + fimc_is_free_cpu_memory(is); + + return 0; +} + +static const struct of_device_id fimc_is_of_match[] = { + { .compatible = "samsung,exynos4212-fimc-is" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, fimc_is_of_match); + +static const struct dev_pm_ops fimc_is_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fimc_is_suspend, fimc_is_resume) + SET_RUNTIME_PM_OPS(fimc_is_runtime_suspend, fimc_is_runtime_resume, + NULL) +}; + +static struct platform_driver fimc_is_driver = { + .probe = fimc_is_probe, + .remove = fimc_is_remove, + .driver = { + .of_match_table = fimc_is_of_match, + .name = FIMC_IS_DRV_NAME, + .owner = THIS_MODULE, + .pm = &fimc_is_pm_ops, + } +}; + +static int fimc_is_module_init(void) +{ + int ret; + + ret = fimc_is_register_sensor_driver(); + if (ret < 0) + return ret; + + ret = fimc_is_register_i2c_driver(); + if (ret < 0) + goto err_sens; + + ret = platform_driver_register(&fimc_is_driver); + if (!ret) + return ret; + + fimc_is_unregister_i2c_driver(); +err_sens: + fimc_is_unregister_sensor_driver(); + return ret; +} + +static void fimc_is_module_exit(void) +{ + fimc_is_unregister_sensor_driver(); + fimc_is_unregister_i2c_driver(); + platform_driver_unregister(&fimc_is_driver); +} + +module_init(fimc_is_module_init); +module_exit(fimc_is_module_exit); + +MODULE_ALIAS("platform:" FIMC_IS_DRV_NAME); +MODULE_AUTHOR("Younghwan Joo "); +MODULE_AUTHOR("Sylwester Nawrocki "); diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h new file mode 100644 index 00000000..d7db133b --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-is.h @@ -0,0 +1,343 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Authors: Younghwan Joo + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef FIMC_IS_H_ +#define FIMC_IS_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fimc-isp.h" +#include "fimc-is-command.h" +#include "fimc-is-sensor.h" +#include "fimc-is-param.h" +#include "fimc-is-regs.h" + +#define FIMC_IS_DRV_NAME "exynos4-fimc-is" + +#define FIMC_IS_FW_FILENAME "fimc_is_fw.bin" +#define FIMC_IS_SETFILE_6A3 "setfile.bin" + +#define FIMC_IS_FW_LOAD_TIMEOUT 1000 /* ms */ +#define FIMC_IS_POWER_ON_TIMEOUT 1000 /* us */ + +#define FIMC_IS_SENSOR_NUM 2 + +/* Memory definitions */ +#define FIMC_IS_CPU_MEM_SIZE (0xa00000) +#define FIMC_IS_CPU_BASE_MASK ((1 << 26) - 1) +#define FIMC_IS_REGION_SIZE 0x5000 + +#define FIMC_IS_DEBUG_REGION_OFFSET 0x0084b000 +#define FIMC_IS_SHARED_REGION_OFFSET 0x008c0000 +#define FIMC_IS_FW_INFO_LEN 31 +#define FIMC_IS_FW_VER_LEN 7 +#define FIMC_IS_FW_DESC_LEN (FIMC_IS_FW_INFO_LEN + \ + FIMC_IS_FW_VER_LEN) +#define FIMC_IS_SETFILE_INFO_LEN 39 + +#define FIMC_IS_EXTRA_MEM_SIZE (FIMC_IS_EXTRA_FW_SIZE + \ + FIMC_IS_EXTRA_SETFILE_SIZE + 0x1000) +#define FIMC_IS_EXTRA_FW_SIZE 0x180000 +#define FIMC_IS_EXTRA_SETFILE_SIZE 0x4b000 + +/* TODO: revisit */ +#define FIMC_IS_FW_ADDR_MASK ((1 << 26) - 1) +#define FIMC_IS_FW_SIZE_MAX (SZ_4M) +#define FIMC_IS_FW_SIZE_MIN (SZ_32K) + +#define ATCLK_MCUISP_FREQUENCY 100000000UL +#define ACLK_AXI_FREQUENCY 100000000UL + +enum { + ISS_CLK_PPMUISPX, + ISS_CLK_PPMUISPMX, + ISS_CLK_LITE0, + ISS_CLK_LITE1, + ISS_CLK_MPLL, + ISS_CLK_ISP, + ISS_CLK_DRC, + ISS_CLK_FD, + ISS_CLK_MCUISP, + ISS_CLK_UART, + ISS_GATE_CLKS_MAX, + ISS_CLK_ISP_DIV0 = ISS_GATE_CLKS_MAX, + ISS_CLK_ISP_DIV1, + ISS_CLK_MCUISP_DIV0, + ISS_CLK_MCUISP_DIV1, + ISS_CLK_ACLK200, + ISS_CLK_ACLK200_DIV, + ISS_CLK_ACLK400MCUISP, + ISS_CLK_ACLK400MCUISP_DIV, + ISS_CLKS_MAX +}; + +/* The driver's internal state flags */ +enum { + IS_ST_IDLE, + IS_ST_PWR_ON, + IS_ST_A5_PWR_ON, + IS_ST_FW_LOADED, + IS_ST_OPEN_SENSOR, + IS_ST_SETFILE_LOADED, + IS_ST_INIT_DONE, + IS_ST_STREAM_ON, + IS_ST_STREAM_OFF, + IS_ST_CHANGE_MODE, + IS_ST_BLOCK_CMD_CLEARED, + IS_ST_SET_ZOOM, + IS_ST_PWR_SUBIP_ON, + IS_ST_END, +}; + +enum af_state { + FIMC_IS_AF_IDLE = 0, + FIMC_IS_AF_SETCONFIG = 1, + FIMC_IS_AF_RUNNING = 2, + FIMC_IS_AF_LOCK = 3, + FIMC_IS_AF_ABORT = 4, + FIMC_IS_AF_FAILED = 5, +}; + +enum af_lock_state { + FIMC_IS_AF_UNLOCKED = 0, + FIMC_IS_AF_LOCKED = 2 +}; + +enum ae_lock_state { + FIMC_IS_AE_UNLOCKED = 0, + FIMC_IS_AE_LOCKED = 1 +}; + +enum awb_lock_state { + FIMC_IS_AWB_UNLOCKED = 0, + FIMC_IS_AWB_LOCKED = 1 +}; + +enum { + IS_METERING_CONFIG_CMD, + IS_METERING_CONFIG_WIN_POS_X, + IS_METERING_CONFIG_WIN_POS_Y, + IS_METERING_CONFIG_WIN_WIDTH, + IS_METERING_CONFIG_WIN_HEIGHT, + IS_METERING_CONFIG_MAX +}; + +struct is_setfile { + const struct firmware *info; + int state; + u32 sub_index; + u32 base; + size_t size; +}; + +struct is_fd_result_header { + u32 offset; + u32 count; + u32 index; + u32 curr_index; + u32 width; + u32 height; +}; + +struct is_af_info { + u16 mode; + u32 af_state; + u32 af_lock_state; + u32 ae_lock_state; + u32 awb_lock_state; + u16 pos_x; + u16 pos_y; + u16 prev_pos_x; + u16 prev_pos_y; + u16 use_af; +}; + +struct fimc_is_firmware { + const struct firmware *f_w; + + dma_addr_t paddr; + void *vaddr; + unsigned int size; + + char info[FIMC_IS_FW_INFO_LEN + 1]; + char version[FIMC_IS_FW_VER_LEN + 1]; + char setfile_info[FIMC_IS_SETFILE_INFO_LEN + 1]; + u8 state; +}; + +struct fimc_is_memory { + /* physical base address */ + dma_addr_t paddr; + /* virtual base address */ + void *vaddr; + /* total length */ + unsigned int size; +}; + +#define FIMC_IS_I2H_MAX_ARGS 12 + +struct i2h_cmd { + u32 cmd; + u32 sensor_id; + u16 num_args; + u32 args[FIMC_IS_I2H_MAX_ARGS]; +}; + +struct h2i_cmd { + u16 cmd_type; + u32 entry_id; +}; + +#define FIMC_IS_DEBUG_MSG 0x3f +#define FIMC_IS_DEBUG_LEVEL 3 + +struct fimc_is_setfile { + const struct firmware *info; + unsigned int state; + unsigned int size; + u32 sub_index; + u32 base; +}; + +struct chain_config { + struct global_param global; + struct sensor_param sensor; + struct isp_param isp; + struct drc_param drc; + struct fd_param fd; + + unsigned long p_region_index1; + unsigned long p_region_index2; +}; + +/** + * struct fimc_is - fimc-is data structure + * @pdev: pointer to FIMC-IS platform device + * @pctrl: pointer to pinctrl structure for this device + * @v4l2_dev: pointer to top the level v4l2_device + * @alloc_ctx: videobuf2 memory allocator context + * @lock: mutex serializing video device and the subdev operations + * @slock: spinlock protecting this data structure and the hw registers + * @clocks: FIMC-LITE gate clock + * @regs: MCUCTL mmapped registers region + * @pmu_regs: PMU ISP mmapped registers region + * @irq_queue: interrupt handling waitqueue + * @lpm: low power mode flag + * @state: internal driver's state flags + */ +struct fimc_is { + struct platform_device *pdev; + struct pinctrl *pctrl; + struct v4l2_device *v4l2_dev; + + struct fimc_is_firmware fw; + struct fimc_is_memory memory; + struct firmware *f_w; + + struct fimc_isp isp; + struct fimc_is_sensor *sensor; + struct fimc_is_setfile setfile; + + struct vb2_alloc_ctx *alloc_ctx; + struct v4l2_ctrl_handler ctrl_handler; + + struct mutex lock; + spinlock_t slock; + + struct clk *clocks[ISS_CLKS_MAX]; + void __iomem *regs; + void __iomem *pmu_regs; + int irq; + wait_queue_head_t irq_queue; + u8 lpm; + + unsigned long state; + unsigned int sensor_index; + + struct i2h_cmd i2h_cmd; + struct h2i_cmd h2i_cmd; + struct is_fd_result_header fd_header; + + struct chain_config config[IS_SC_MAX]; + unsigned config_index; + + struct is_region *is_p_region; + dma_addr_t is_dma_p_region; + struct is_share_region *is_shared_region; + struct is_af_info af; + + struct dentry *debugfs_entry; +}; + +static inline struct fimc_is *fimc_isp_to_is(struct fimc_isp *isp) +{ + return container_of(isp, struct fimc_is, isp); +} + +static inline void fimc_is_mem_barrier(void) +{ + mb(); +} + +static inline void fimc_is_set_param_bit(struct fimc_is *is, int num) +{ + struct chain_config *cfg = &is->config[is->config_index]; + + if (num >= 32) + set_bit(num - 32, &cfg->p_region_index2); + else + set_bit(num, &cfg->p_region_index1); +} + +static inline void fimc_is_set_param_ctrl_cmd(struct fimc_is *is, int cmd) +{ + is->is_p_region->parameter.isp.control.cmd = cmd; +} + +static inline void mcuctl_write(u32 v, struct fimc_is *is, unsigned int offset) +{ + writel(v, is->regs + offset); +} + +static inline u32 mcuctl_read(struct fimc_is *is, unsigned int offset) +{ + return readl(is->regs + offset); +} + +static inline void pmuisp_write(u32 v, struct fimc_is *is, unsigned int offset) +{ + writel(v, is->pmu_regs + offset); +} + +static inline u32 pmuisp_read(struct fimc_is *is, unsigned int offset) +{ + return readl(is->pmu_regs + offset); +} + +int fimc_is_wait_event(struct fimc_is *is, unsigned long bit, + unsigned int state, unsigned int timeout); +int fimc_is_cpu_set_power(struct fimc_is *is, int on); +int fimc_is_start_firmware(struct fimc_is *is); +int fimc_is_hw_initialize(struct fimc_is *is); +void fimc_is_log_dump(const char *level, const void *buf, size_t len); + +#endif /* FIMC_IS_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c new file mode 100644 index 00000000..7ede30b5 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-isp.c @@ -0,0 +1,703 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Authors: Sylwester Nawrocki + * Younghwan Joo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define pr_fmt(fmt) "%s:%d " fmt, __func__, __LINE__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "media-dev.h" +#include "fimc-is-command.h" +#include "fimc-is-param.h" +#include "fimc-is-regs.h" +#include "fimc-is.h" + +static int debug; +module_param_named(debug_isp, debug, int, S_IRUGO | S_IWUSR); + +static const struct fimc_fmt fimc_isp_formats[FIMC_ISP_NUM_FORMATS] = { + { + .name = "RAW8 (GRBG)", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = { 8 }, + .color = FIMC_FMT_RAW8, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_SGRBG8_1X8, + }, { + .name = "RAW10 (GRBG)", + .fourcc = V4L2_PIX_FMT_SGRBG10, + .depth = { 10 }, + .color = FIMC_FMT_RAW10, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_SGRBG10_1X10, + }, { + .name = "RAW12 (GRBG)", + .fourcc = V4L2_PIX_FMT_SGRBG12, + .depth = { 12 }, + .color = FIMC_FMT_RAW12, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_SGRBG12_1X12, + }, +}; + +/** + * fimc_isp_find_format - lookup color format by fourcc or media bus code + * @pixelformat: fourcc to match, ignored if null + * @mbus_code: media bus code to match, ignored if null + * @index: index to the fimc_isp_formats array, ignored if negative + */ +const struct fimc_fmt *fimc_isp_find_format(const u32 *pixelformat, + const u32 *mbus_code, int index) +{ + const struct fimc_fmt *fmt, *def_fmt = NULL; + unsigned int i; + int id = 0; + + if (index >= (int)ARRAY_SIZE(fimc_isp_formats)) + return NULL; + + for (i = 0; i < ARRAY_SIZE(fimc_isp_formats); ++i) { + fmt = &fimc_isp_formats[i]; + if (pixelformat && fmt->fourcc == *pixelformat) + return fmt; + if (mbus_code && fmt->mbus_code == *mbus_code) + return fmt; + if (index == id) + def_fmt = fmt; + id++; + } + return def_fmt; +} + +void fimc_isp_irq_handler(struct fimc_is *is) +{ + is->i2h_cmd.args[0] = mcuctl_read(is, MCUCTL_REG_ISSR(20)); + is->i2h_cmd.args[1] = mcuctl_read(is, MCUCTL_REG_ISSR(21)); + + fimc_is_fw_clear_irq1(is, FIMC_IS_INT_FRAME_DONE_ISP); + + /* TODO: Complete ISP DMA interrupt handler */ + wake_up(&is->irq_queue); +} + +/* Capture subdev media entity operations */ +static int fimc_is_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + return 0; +} + +static const struct media_entity_operations fimc_is_subdev_media_ops = { + .link_setup = fimc_is_link_setup, +}; + +static int fimc_is_subdev_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + const struct fimc_fmt *fmt; + + fmt = fimc_isp_find_format(NULL, NULL, code->index); + if (!fmt) + return -EINVAL; + code->code = fmt->mbus_code; + return 0; +} + +static int fimc_isp_subdev_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct fimc_isp *isp = v4l2_get_subdevdata(sd); + struct fimc_is *is = fimc_isp_to_is(isp); + struct v4l2_mbus_framefmt *mf = &fmt->format; + struct v4l2_mbus_framefmt cur_fmt; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + fmt->format = *mf; + return 0; + } + + mf->colorspace = V4L2_COLORSPACE_SRGB; + + mutex_lock(&isp->subdev_lock); + __is_get_frame_size(is, &cur_fmt); + + if (fmt->pad == FIMC_ISP_SD_PAD_SINK) { + /* full camera input frame size */ + mf->width = cur_fmt.width + FIMC_ISP_CAC_MARGIN_WIDTH; + mf->height = cur_fmt.height + FIMC_ISP_CAC_MARGIN_HEIGHT; + mf->code = V4L2_MBUS_FMT_SGRBG10_1X10; + } else { + /* crop size */ + mf->width = cur_fmt.width; + mf->height = cur_fmt.height; + mf->code = V4L2_MBUS_FMT_YUV10_1X30; + } + + mutex_unlock(&isp->subdev_lock); + + v4l2_dbg(1, debug, sd, "%s: pad%d: fmt: 0x%x, %dx%d\n", + __func__, fmt->pad, mf->code, mf->width, mf->height); + + return 0; +} + +static void __isp_subdev_try_format(struct fimc_isp *isp, + struct v4l2_subdev_format *fmt) +{ + struct v4l2_mbus_framefmt *mf = &fmt->format; + + if (fmt->pad == FIMC_ISP_SD_PAD_SINK) { + v4l_bound_align_image(&mf->width, FIMC_ISP_SINK_WIDTH_MIN, + FIMC_ISP_SINK_WIDTH_MAX, 0, + &mf->height, FIMC_ISP_SINK_HEIGHT_MIN, + FIMC_ISP_SINK_HEIGHT_MAX, 0, 0); + isp->subdev_fmt = *mf; + } else { + /* Allow changing format only on sink pad */ + mf->width = isp->subdev_fmt.width - FIMC_ISP_CAC_MARGIN_WIDTH; + mf->height = isp->subdev_fmt.height - FIMC_ISP_CAC_MARGIN_HEIGHT; + mf->code = isp->subdev_fmt.code; + } +} + +static int fimc_isp_subdev_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct fimc_isp *isp = v4l2_get_subdevdata(sd); + struct fimc_is *is = fimc_isp_to_is(isp); + struct v4l2_mbus_framefmt *mf = &fmt->format; + int ret = 0; + + v4l2_dbg(1, debug, sd, "%s: pad%d: code: 0x%x, %dx%d\n", + __func__, fmt->pad, mf->code, mf->width, mf->height); + + mf->colorspace = V4L2_COLORSPACE_SRGB; + + mutex_lock(&isp->subdev_lock); + __isp_subdev_try_format(isp, fmt); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + *mf = fmt->format; + mutex_unlock(&isp->subdev_lock); + return 0; + } + + if (sd->entity.stream_count == 0) + __is_set_frame_size(is, mf); + else + ret = -EBUSY; + mutex_unlock(&isp->subdev_lock); + + return ret; +} + +static int fimc_isp_subdev_s_stream(struct v4l2_subdev *sd, int on) +{ + struct fimc_isp *isp = v4l2_get_subdevdata(sd); + struct fimc_is *is = fimc_isp_to_is(isp); + int ret; + + v4l2_dbg(1, debug, sd, "%s: on: %d\n", __func__, on); + + if (!test_bit(IS_ST_INIT_DONE, &is->state)) + return -EBUSY; + + fimc_is_mem_barrier(); + + if (on) { + if (__get_pending_param_count(is)) { + ret = fimc_is_itf_s_param(is, true); + if (ret < 0) + return ret; + } + + v4l2_dbg(1, debug, sd, "changing mode to %d\n", + is->config_index); + ret = fimc_is_itf_mode_change(is); + if (ret) + return -EINVAL; + + clear_bit(IS_ST_STREAM_ON, &is->state); + fimc_is_hw_stream_on(is); + ret = fimc_is_wait_event(is, IS_ST_STREAM_ON, 1, + FIMC_IS_CONFIG_TIMEOUT); + if (ret < 0) { + v4l2_err(sd, "stream on timeout\n"); + return ret; + } + } else { + clear_bit(IS_ST_STREAM_OFF, &is->state); + fimc_is_hw_stream_off(is); + ret = fimc_is_wait_event(is, IS_ST_STREAM_OFF, 1, + FIMC_IS_CONFIG_TIMEOUT); + if (ret < 0) { + v4l2_err(sd, "stream off timeout\n"); + return ret; + } + is->setfile.sub_index = 0; + } + + return 0; +} + +static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on) +{ + struct fimc_isp *isp = v4l2_get_subdevdata(sd); + struct fimc_is *is = fimc_isp_to_is(isp); + int ret = 0; + + pr_debug("on: %d\n", on); + + if (on) { + ret = pm_runtime_get_sync(&is->pdev->dev); + if (ret < 0) + return ret; + set_bit(IS_ST_PWR_ON, &is->state); + + ret = fimc_is_start_firmware(is); + if (ret < 0) { + v4l2_err(sd, "firmware booting failed\n"); + pm_runtime_put(&is->pdev->dev); + return ret; + } + set_bit(IS_ST_PWR_SUBIP_ON, &is->state); + + ret = fimc_is_hw_initialize(is); + } else { + /* Close sensor */ + if (!test_bit(IS_ST_PWR_ON, &is->state)) { + fimc_is_hw_close_sensor(is, 0); + + ret = fimc_is_wait_event(is, IS_ST_OPEN_SENSOR, 0, + FIMC_IS_CONFIG_TIMEOUT); + if (ret < 0) { + v4l2_err(sd, "sensor close timeout\n"); + return ret; + } + } + + /* SUB IP power off */ + if (test_bit(IS_ST_PWR_SUBIP_ON, &is->state)) { + fimc_is_hw_subip_power_off(is); + ret = fimc_is_wait_event(is, IS_ST_PWR_SUBIP_ON, 0, + FIMC_IS_CONFIG_TIMEOUT); + if (ret < 0) { + v4l2_err(sd, "sub-IP power off timeout\n"); + return ret; + } + } + + fimc_is_cpu_set_power(is, 0); + pm_runtime_put_sync(&is->pdev->dev); + + clear_bit(IS_ST_PWR_ON, &is->state); + clear_bit(IS_ST_INIT_DONE, &is->state); + is->state = 0; + is->config[is->config_index].p_region_index1 = 0; + is->config[is->config_index].p_region_index2 = 0; + set_bit(IS_ST_IDLE, &is->state); + wmb(); + } + + return ret; +} + +static int fimc_isp_subdev_open(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt fmt; + struct v4l2_mbus_framefmt *format; + + format = v4l2_subdev_get_try_format(fh, FIMC_ISP_SD_PAD_SINK); + + fmt.colorspace = V4L2_COLORSPACE_SRGB; + fmt.code = fimc_isp_formats[0].mbus_code; + fmt.width = DEFAULT_PREVIEW_STILL_WIDTH + FIMC_ISP_CAC_MARGIN_WIDTH; + fmt.height = DEFAULT_PREVIEW_STILL_HEIGHT + FIMC_ISP_CAC_MARGIN_HEIGHT; + fmt.field = V4L2_FIELD_NONE; + *format = fmt; + + format = v4l2_subdev_get_try_format(fh, FIMC_ISP_SD_PAD_SRC_FIFO); + fmt.width = DEFAULT_PREVIEW_STILL_WIDTH; + fmt.height = DEFAULT_PREVIEW_STILL_HEIGHT; + *format = fmt; + + format = v4l2_subdev_get_try_format(fh, FIMC_ISP_SD_PAD_SRC_DMA); + *format = fmt; + + return 0; +} + +static const struct v4l2_subdev_internal_ops fimc_is_subdev_internal_ops = { + .open = fimc_isp_subdev_open, +}; + +static const struct v4l2_subdev_pad_ops fimc_is_subdev_pad_ops = { + .enum_mbus_code = fimc_is_subdev_enum_mbus_code, + .get_fmt = fimc_isp_subdev_get_fmt, + .set_fmt = fimc_isp_subdev_set_fmt, +}; + +static const struct v4l2_subdev_video_ops fimc_is_subdev_video_ops = { + .s_stream = fimc_isp_subdev_s_stream, +}; + +static const struct v4l2_subdev_core_ops fimc_is_core_ops = { + .s_power = fimc_isp_subdev_s_power, +}; + +static struct v4l2_subdev_ops fimc_is_subdev_ops = { + .core = &fimc_is_core_ops, + .video = &fimc_is_subdev_video_ops, + .pad = &fimc_is_subdev_pad_ops, +}; + +static int __ctrl_set_white_balance(struct fimc_is *is, int value) +{ + switch (value) { + case V4L2_WHITE_BALANCE_AUTO: + __is_set_isp_awb(is, ISP_AWB_COMMAND_AUTO, 0); + break; + case V4L2_WHITE_BALANCE_DAYLIGHT: + __is_set_isp_awb(is, ISP_AWB_COMMAND_ILLUMINATION, + ISP_AWB_ILLUMINATION_DAYLIGHT); + break; + case V4L2_WHITE_BALANCE_CLOUDY: + __is_set_isp_awb(is, ISP_AWB_COMMAND_ILLUMINATION, + ISP_AWB_ILLUMINATION_CLOUDY); + break; + case V4L2_WHITE_BALANCE_INCANDESCENT: + __is_set_isp_awb(is, ISP_AWB_COMMAND_ILLUMINATION, + ISP_AWB_ILLUMINATION_TUNGSTEN); + break; + case V4L2_WHITE_BALANCE_FLUORESCENT: + __is_set_isp_awb(is, ISP_AWB_COMMAND_ILLUMINATION, + ISP_AWB_ILLUMINATION_FLUORESCENT); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int __ctrl_set_aewb_lock(struct fimc_is *is, + struct v4l2_ctrl *ctrl) +{ + bool awb_lock = ctrl->val & V4L2_LOCK_WHITE_BALANCE; + bool ae_lock = ctrl->val & V4L2_LOCK_EXPOSURE; + struct isp_param *isp = &is->is_p_region->parameter.isp; + int cmd, ret; + + cmd = ae_lock ? ISP_AA_COMMAND_STOP : ISP_AA_COMMAND_START; + isp->aa.cmd = cmd; + isp->aa.target = ISP_AA_TARGET_AE; + fimc_is_set_param_bit(is, PARAM_ISP_AA); + is->af.ae_lock_state = ae_lock; + wmb(); + + ret = fimc_is_itf_s_param(is, false); + if (ret < 0) + return ret; + + cmd = awb_lock ? ISP_AA_COMMAND_STOP : ISP_AA_COMMAND_START; + isp->aa.cmd = cmd; + isp->aa.target = ISP_AA_TARGET_AE; + fimc_is_set_param_bit(is, PARAM_ISP_AA); + is->af.awb_lock_state = awb_lock; + wmb(); + + return fimc_is_itf_s_param(is, false); +} + +/* Supported manual ISO values */ +static const s64 iso_qmenu[] = { + 50, 100, 200, 400, 800, +}; + +static int __ctrl_set_iso(struct fimc_is *is, int value) +{ + unsigned int idx, iso; + + if (value == V4L2_ISO_SENSITIVITY_AUTO) { + __is_set_isp_iso(is, ISP_ISO_COMMAND_AUTO, 0); + return 0; + } + idx = is->isp.ctrls.iso->val; + if (idx >= ARRAY_SIZE(iso_qmenu)) + return -EINVAL; + + iso = iso_qmenu[idx]; + __is_set_isp_iso(is, ISP_ISO_COMMAND_MANUAL, iso); + return 0; +} + +static int __ctrl_set_metering(struct fimc_is *is, unsigned int value) +{ + unsigned int val; + + switch (value) { + case V4L2_EXPOSURE_METERING_AVERAGE: + val = ISP_METERING_COMMAND_AVERAGE; + break; + case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED: + val = ISP_METERING_COMMAND_CENTER; + break; + case V4L2_EXPOSURE_METERING_SPOT: + val = ISP_METERING_COMMAND_SPOT; + break; + case V4L2_EXPOSURE_METERING_MATRIX: + val = ISP_METERING_COMMAND_MATRIX; + break; + default: + return -EINVAL; + }; + + __is_set_isp_metering(is, IS_METERING_CONFIG_CMD, val); + return 0; +} + +static int __ctrl_set_afc(struct fimc_is *is, int value) +{ + switch (value) { + case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED: + __is_set_isp_afc(is, ISP_AFC_COMMAND_DISABLE, 0); + break; + case V4L2_CID_POWER_LINE_FREQUENCY_50HZ: + __is_set_isp_afc(is, ISP_AFC_COMMAND_MANUAL, 50); + break; + case V4L2_CID_POWER_LINE_FREQUENCY_60HZ: + __is_set_isp_afc(is, ISP_AFC_COMMAND_MANUAL, 60); + break; + case V4L2_CID_POWER_LINE_FREQUENCY_AUTO: + __is_set_isp_afc(is, ISP_AFC_COMMAND_AUTO, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int __ctrl_set_image_effect(struct fimc_is *is, int value) +{ + static const u8 effects[][2] = { + { V4L2_COLORFX_NONE, ISP_IMAGE_EFFECT_DISABLE }, + { V4L2_COLORFX_BW, ISP_IMAGE_EFFECT_MONOCHROME }, + { V4L2_COLORFX_SEPIA, ISP_IMAGE_EFFECT_SEPIA }, + { V4L2_COLORFX_NEGATIVE, ISP_IMAGE_EFFECT_NEGATIVE_MONO }, + { 16 /* TODO */, ISP_IMAGE_EFFECT_NEGATIVE_COLOR }, + }; + int i; + + for (i = 0; i < ARRAY_SIZE(effects); i++) { + if (effects[i][0] != value) + continue; + + __is_set_isp_effect(is, effects[i][1]); + return 0; + } + + return -EINVAL; +} + +static int fimc_is_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct fimc_isp *isp = ctrl_to_fimc_isp(ctrl); + struct fimc_is *is = fimc_isp_to_is(isp); + bool set_param = true; + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_CONTRAST, + ctrl->val); + break; + + case V4L2_CID_SATURATION: + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_SATURATION, + ctrl->val); + break; + + case V4L2_CID_SHARPNESS: + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_SHARPNESS, + ctrl->val); + break; + + case V4L2_CID_EXPOSURE_ABSOLUTE: + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_EXPOSURE, + ctrl->val); + break; + + case V4L2_CID_BRIGHTNESS: + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_BRIGHTNESS, + ctrl->val); + break; + + case V4L2_CID_HUE: + __is_set_isp_adjust(is, ISP_ADJUST_COMMAND_MANUAL_HUE, + ctrl->val); + break; + + case V4L2_CID_EXPOSURE_METERING: + ret = __ctrl_set_metering(is, ctrl->val); + break; + + case V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE: + ret = __ctrl_set_white_balance(is, ctrl->val); + break; + + case V4L2_CID_3A_LOCK: + ret = __ctrl_set_aewb_lock(is, ctrl); + set_param = false; + break; + + case V4L2_CID_ISO_SENSITIVITY_AUTO: + ret = __ctrl_set_iso(is, ctrl->val); + break; + + case V4L2_CID_POWER_LINE_FREQUENCY: + ret = __ctrl_set_afc(is, ctrl->val); + break; + + case V4L2_CID_COLORFX: + __ctrl_set_image_effect(is, ctrl->val); + break; + + default: + ret = -EINVAL; + break; + } + + if (ret < 0) { + v4l2_err(&isp->subdev, "Failed to set control: %s (%d)\n", + ctrl->name, ctrl->val); + return ret; + } + + if (set_param && test_bit(IS_ST_STREAM_ON, &is->state)) + return fimc_is_itf_s_param(is, true); + + return 0; +} + +static const struct v4l2_ctrl_ops fimc_isp_ctrl_ops = { + .s_ctrl = fimc_is_s_ctrl, +}; + +int fimc_isp_subdev_create(struct fimc_isp *isp) +{ + const struct v4l2_ctrl_ops *ops = &fimc_isp_ctrl_ops; + struct v4l2_ctrl_handler *handler = &isp->ctrls.handler; + struct v4l2_subdev *sd = &isp->subdev; + struct fimc_isp_ctrls *ctrls = &isp->ctrls; + int ret; + + mutex_init(&isp->subdev_lock); + + v4l2_subdev_init(sd, &fimc_is_subdev_ops); + sd->grp_id = GRP_ID_FIMC_IS; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + snprintf(sd->name, sizeof(sd->name), "FIMC-IS-ISP"); + + isp->subdev_pads[FIMC_ISP_SD_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + isp->subdev_pads[FIMC_ISP_SD_PAD_SRC_FIFO].flags = MEDIA_PAD_FL_SOURCE; + isp->subdev_pads[FIMC_ISP_SD_PAD_SRC_DMA].flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sd->entity, FIMC_ISP_SD_PADS_NUM, + isp->subdev_pads, 0); + if (ret) + return ret; + + v4l2_ctrl_handler_init(handler, 20); + + ctrls->saturation = v4l2_ctrl_new_std(handler, ops, V4L2_CID_SATURATION, + -2, 2, 1, 0); + ctrls->brightness = v4l2_ctrl_new_std(handler, ops, V4L2_CID_BRIGHTNESS, + -4, 4, 1, 0); + ctrls->contrast = v4l2_ctrl_new_std(handler, ops, V4L2_CID_CONTRAST, + -2, 2, 1, 0); + ctrls->sharpness = v4l2_ctrl_new_std(handler, ops, V4L2_CID_SHARPNESS, + -2, 2, 1, 0); + ctrls->hue = v4l2_ctrl_new_std(handler, ops, V4L2_CID_HUE, + -2, 2, 1, 0); + + ctrls->auto_wb = v4l2_ctrl_new_std_menu(handler, ops, + V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, + 8, ~0x14e, V4L2_WHITE_BALANCE_AUTO); + + ctrls->exposure = v4l2_ctrl_new_std(handler, ops, + V4L2_CID_EXPOSURE_ABSOLUTE, + -4, 4, 1, 0); + + ctrls->exp_metering = v4l2_ctrl_new_std_menu(handler, ops, + V4L2_CID_EXPOSURE_METERING, 3, + ~0xf, V4L2_EXPOSURE_METERING_AVERAGE); + + v4l2_ctrl_new_std_menu(handler, ops, V4L2_CID_POWER_LINE_FREQUENCY, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO); + /* ISO sensitivity */ + ctrls->auto_iso = v4l2_ctrl_new_std_menu(handler, ops, + V4L2_CID_ISO_SENSITIVITY_AUTO, 1, 0, + V4L2_ISO_SENSITIVITY_AUTO); + + ctrls->iso = v4l2_ctrl_new_int_menu(handler, ops, + V4L2_CID_ISO_SENSITIVITY, ARRAY_SIZE(iso_qmenu) - 1, + ARRAY_SIZE(iso_qmenu)/2 - 1, iso_qmenu); + + ctrls->aewb_lock = v4l2_ctrl_new_std(handler, ops, + V4L2_CID_3A_LOCK, 0, 0x3, 0, 0); + + /* TODO: Add support for NEGATIVE_COLOR option */ + ctrls->colorfx = v4l2_ctrl_new_std_menu(handler, ops, V4L2_CID_COLORFX, + V4L2_COLORFX_SET_CBCR + 1, ~0x1000f, V4L2_COLORFX_NONE); + + if (handler->error) { + media_entity_cleanup(&sd->entity); + return handler->error; + } + + v4l2_ctrl_auto_cluster(2, &ctrls->auto_iso, + V4L2_ISO_SENSITIVITY_MANUAL, false); + + sd->ctrl_handler = handler; + sd->internal_ops = &fimc_is_subdev_internal_ops; + sd->entity.ops = &fimc_is_subdev_media_ops; + v4l2_set_subdevdata(sd, isp); + + return 0; +} + +void fimc_isp_subdev_destroy(struct fimc_isp *isp) +{ + struct v4l2_subdev *sd = &isp->subdev; + + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(&isp->ctrls.handler); + v4l2_set_subdevdata(sd, NULL); +} diff --git a/drivers/media/platform/exynos4-is/fimc-isp.h b/drivers/media/platform/exynos4-is/fimc-isp.h new file mode 100644 index 00000000..800aba7a --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-isp.h @@ -0,0 +1,181 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * Authors: Sylwester Nawrocki + * Younghwan Joo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef FIMC_ISP_H_ +#define FIMC_ISP_H_ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* FIXME: revisit these constraints */ +#define FIMC_ISP_SINK_WIDTH_MIN (16 + 8) +#define FIMC_ISP_SINK_HEIGHT_MIN (12 + 8) +#define FIMC_ISP_SOURCE_WIDTH_MIN 8 +#define FIMC_ISP_SOURC_HEIGHT_MIN 8 +#define FIMC_ISP_CAC_MARGIN_WIDTH 16 +#define FIMC_ISP_CAC_MARGIN_HEIGHT 12 + +#define FIMC_ISP_SINK_WIDTH_MAX (4000 - 16) +#define FIMC_ISP_SINK_HEIGHT_MAX (4000 + 12) +#define FIMC_ISP_SOURCE_WIDTH_MAX 4000 +#define FIMC_ISP_SOURC_HEIGHT_MAX 4000 + +#define FIMC_ISP_NUM_FORMATS 3 +#define FIMC_ISP_REQ_BUFS_MIN 2 + +#define FIMC_ISP_SD_PAD_SINK 0 +#define FIMC_ISP_SD_PAD_SRC_FIFO 1 +#define FIMC_ISP_SD_PAD_SRC_DMA 2 +#define FIMC_ISP_SD_PADS_NUM 3 +#define FIMC_ISP_MAX_PLANES 1 + +/** + * struct fimc_isp_frame - source/target frame properties + * @width: full image width + * @height: full image height + * @rect: crop/composition rectangle + */ +struct fimc_isp_frame { + u16 width; + u16 height; + struct v4l2_rect rect; +}; + +struct fimc_isp_ctrls { + struct v4l2_ctrl_handler handler; + + /* Auto white balance */ + struct v4l2_ctrl *auto_wb; + /* Auto ISO control cluster */ + struct { + struct v4l2_ctrl *auto_iso; + struct v4l2_ctrl *iso; + }; + /* Adjust - contrast */ + struct v4l2_ctrl *contrast; + /* Adjust - saturation */ + struct v4l2_ctrl *saturation; + /* Adjust - sharpness */ + struct v4l2_ctrl *sharpness; + /* Adjust - brightness */ + struct v4l2_ctrl *brightness; + /* Adjust - hue */ + struct v4l2_ctrl *hue; + + /* Auto/manual exposure */ + struct v4l2_ctrl *auto_exp; + /* Manual exposure value */ + struct v4l2_ctrl *exposure; + /* AE/AWB lock/unlock */ + struct v4l2_ctrl *aewb_lock; + /* Exposure metering mode */ + struct v4l2_ctrl *exp_metering; + /* AFC */ + struct v4l2_ctrl *afc; + /* ISP image effect */ + struct v4l2_ctrl *colorfx; +}; + +/** + * struct fimc_is_video - fimc-is video device structure + * @vdev: video_device structure + * @type: video device type (CAPTURE/OUTPUT) + * @pad: video device media (sink) pad + * @pending_buf_q: pending buffers queue head + * @active_buf_q: a queue head of buffers scheduled in hardware + * @vb_queue: vb2 buffer queue + * @active_buf_count: number of video buffers scheduled in hardware + * @frame_count: counter of frames dequeued to user space + * @reqbufs_count: number of buffers requested with REQBUFS ioctl + * @format: current pixel format + */ +struct fimc_is_video { + struct video_device vdev; + enum v4l2_buf_type type; + struct media_pad pad; + struct list_head pending_buf_q; + struct list_head active_buf_q; + struct vb2_queue vb_queue; + unsigned int frame_count; + unsigned int reqbufs_count; + int streaming; + unsigned long payload[FIMC_ISP_MAX_PLANES]; + const struct fimc_fmt *format; +}; + +/** + * struct fimc_isp - FIMC-IS ISP data structure + * @pdev: pointer to FIMC-IS platform device + * @alloc_ctx: videobuf2 memory allocator context + * @subdev: ISP v4l2_subdev + * @subdev_pads: the ISP subdev media pads + * @ctrl_handler: v4l2 controls handler + * @test_pattern: test pattern controls + * @pipeline: video capture pipeline data structure + * @video_lock: mutex serializing video device and the subdev operations + * @fmt: pointer to color format description structure + * @payload: image size in bytes (w x h x bpp) + * @inp_frame: camera input frame structure + * @out_frame: DMA output frame structure + * @source_subdev_grp_id: group id of remote source subdev + * @cac_margin_x: horizontal CAC margin in pixels + * @cac_margin_y: vertical CAC margin in pixels + * @state: driver state flags + * @video_capture: the ISP block video capture device + */ +struct fimc_isp { + struct platform_device *pdev; + struct vb2_alloc_ctx *alloc_ctx; + struct v4l2_subdev subdev; + struct media_pad subdev_pads[FIMC_ISP_SD_PADS_NUM]; + struct v4l2_mbus_framefmt subdev_fmt; + struct v4l2_ctrl *test_pattern; + struct fimc_isp_ctrls ctrls; + + struct mutex video_lock; + struct mutex subdev_lock; + + struct fimc_isp_frame inp_frame; + struct fimc_isp_frame out_frame; + unsigned int source_subdev_grp_id; + + unsigned int cac_margin_x; + unsigned int cac_margin_y; + + unsigned long state; + + struct fimc_is_video video_capture; +}; + +#define ctrl_to_fimc_isp(_ctrl) \ + container_of(ctrl->handler, struct fimc_isp, ctrls.handler) + +struct fimc_is; + +int fimc_isp_subdev_create(struct fimc_isp *isp); +void fimc_isp_subdev_destroy(struct fimc_isp *isp); +void fimc_isp_irq_handler(struct fimc_is *is); +int fimc_is_create_controls(struct fimc_isp *isp); +int fimc_is_delete_controls(struct fimc_isp *isp); +const struct fimc_fmt *fimc_isp_find_format(const u32 *pixelformat, + const u32 *mbus_code, int index); +#endif /* FIMC_ISP_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-lite-reg.c b/drivers/media/platform/exynos4-is/fimc-lite-reg.c new file mode 100644 index 00000000..8cc0d39a --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-lite-reg.c @@ -0,0 +1,302 @@ +/* + * Register interface file for EXYNOS FIMC-LITE (camera interface) driver + * + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include "fimc-lite-reg.h" +#include "fimc-lite.h" +#include "fimc-core.h" + +#define FLITE_RESET_TIMEOUT 50 /* in ms */ + +void flite_hw_reset(struct fimc_lite *dev) +{ + unsigned long end = jiffies + msecs_to_jiffies(FLITE_RESET_TIMEOUT); + u32 cfg; + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg |= FLITE_REG_CIGCTRL_SWRST_REQ; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + while (time_is_after_jiffies(end)) { + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + if (cfg & FLITE_REG_CIGCTRL_SWRST_RDY) + break; + usleep_range(1000, 5000); + } + + cfg |= FLITE_REG_CIGCTRL_SWRST; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +void flite_hw_clear_pending_irq(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS); + cfg &= ~FLITE_REG_CISTATUS_IRQ_CAM; + writel(cfg, dev->regs + FLITE_REG_CISTATUS); +} + +u32 flite_hw_get_interrupt_source(struct fimc_lite *dev) +{ + u32 intsrc = readl(dev->regs + FLITE_REG_CISTATUS); + return intsrc & FLITE_REG_CISTATUS_IRQ_MASK; +} + +void flite_hw_clear_last_capture_end(struct fimc_lite *dev) +{ + + u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS2); + cfg &= ~FLITE_REG_CISTATUS2_LASTCAPEND; + writel(cfg, dev->regs + FLITE_REG_CISTATUS2); +} + +void flite_hw_set_interrupt_mask(struct fimc_lite *dev) +{ + u32 cfg, intsrc; + + /* Select interrupts to be enabled for each output mode */ + if (atomic_read(&dev->out_path) == FIMC_IO_DMA) { + intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN | + FLITE_REG_CIGCTRL_IRQ_LASTEN | + FLITE_REG_CIGCTRL_IRQ_STARTEN; + } else { + /* An output to the FIMC-IS */ + intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN | + FLITE_REG_CIGCTRL_IRQ_LASTEN; + } + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg |= FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK; + cfg &= ~intsrc; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +void flite_hw_capture_start(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT); + cfg |= FLITE_REG_CIIMGCPT_IMGCPTEN; + writel(cfg, dev->regs + FLITE_REG_CIIMGCPT); +} + +void flite_hw_capture_stop(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT); + cfg &= ~FLITE_REG_CIIMGCPT_IMGCPTEN; + writel(cfg, dev->regs + FLITE_REG_CIIMGCPT); +} + +/* + * Test pattern (color bars) enable/disable. External sensor + * pixel clock must be active for the test pattern to work. + */ +void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + if (on) + cfg |= FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR; + else + cfg &= ~FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +static const u32 src_pixfmt_map[8][3] = { + { V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR, + FLITE_REG_CIGCTRL_YUV422_1P }, + { V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB, + FLITE_REG_CIGCTRL_YUV422_1P }, + { V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY, + FLITE_REG_CIGCTRL_YUV422_1P }, + { V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY, + FLITE_REG_CIGCTRL_YUV422_1P }, + { V4L2_MBUS_FMT_SGRBG8_1X8, 0, FLITE_REG_CIGCTRL_RAW8 }, + { V4L2_MBUS_FMT_SGRBG10_1X10, 0, FLITE_REG_CIGCTRL_RAW10 }, + { V4L2_MBUS_FMT_SGRBG12_1X12, 0, FLITE_REG_CIGCTRL_RAW12 }, + { V4L2_MBUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) }, +}; + +/* Set camera input pixel format and resolution */ +void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f) +{ + enum v4l2_mbus_pixelcode pixelcode = f->fmt->mbus_code; + int i = ARRAY_SIZE(src_pixfmt_map); + u32 cfg; + + while (--i >= 0) { + if (src_pixfmt_map[i][0] == pixelcode) + break; + } + + if (i == 0 && src_pixfmt_map[i][0] != pixelcode) { + v4l2_err(&dev->vfd, + "Unsupported pixel code, falling back to %#08x\n", + src_pixfmt_map[i][0]); + } + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg &= ~FLITE_REG_CIGCTRL_FMT_MASK; + cfg |= src_pixfmt_map[i][2]; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + cfg = readl(dev->regs + FLITE_REG_CISRCSIZE); + cfg &= ~(FLITE_REG_CISRCSIZE_ORDER422_MASK | + FLITE_REG_CISRCSIZE_SIZE_CAM_MASK); + cfg |= (f->f_width << 16) | f->f_height; + cfg |= src_pixfmt_map[i][1]; + writel(cfg, dev->regs + FLITE_REG_CISRCSIZE); +} + +/* Set the camera host input window offsets (cropping) */ +void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f) +{ + u32 hoff2, voff2; + u32 cfg; + + cfg = readl(dev->regs + FLITE_REG_CIWDOFST); + cfg &= ~FLITE_REG_CIWDOFST_OFST_MASK; + cfg |= (f->rect.left << 16) | f->rect.top; + cfg |= FLITE_REG_CIWDOFST_WINOFSEN; + writel(cfg, dev->regs + FLITE_REG_CIWDOFST); + + hoff2 = f->f_width - f->rect.width - f->rect.left; + voff2 = f->f_height - f->rect.height - f->rect.top; + + cfg = (hoff2 << 16) | voff2; + writel(cfg, dev->regs + FLITE_REG_CIWDOFST2); +} + +/* Select camera port (A, B) */ +static void flite_hw_set_camera_port(struct fimc_lite *dev, int id) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGENERAL); + if (id == 0) + cfg &= ~FLITE_REG_CIGENERAL_CAM_B; + else + cfg |= FLITE_REG_CIGENERAL_CAM_B; + writel(cfg, dev->regs + FLITE_REG_CIGENERAL); +} + +/* Select serial or parallel bus, camera port (A,B) and set signals polarity */ +void flite_hw_set_camera_bus(struct fimc_lite *dev, + struct fimc_source_info *si) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + unsigned int flags = si->flags; + + if (si->sensor_bus_type != FIMC_BUS_TYPE_MIPI_CSI2) { + cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI | + FLITE_REG_CIGCTRL_INVPOLPCLK | + FLITE_REG_CIGCTRL_INVPOLVSYNC | + FLITE_REG_CIGCTRL_INVPOLHREF); + + if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) + cfg |= FLITE_REG_CIGCTRL_INVPOLPCLK; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + cfg |= FLITE_REG_CIGCTRL_INVPOLVSYNC; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + cfg |= FLITE_REG_CIGCTRL_INVPOLHREF; + } else { + cfg |= FLITE_REG_CIGCTRL_SELCAM_MIPI; + } + + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + flite_hw_set_camera_port(dev, si->mux_id); +} + +static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f) +{ + static const u32 pixcode[4][2] = { + { V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CIODMAFMT_YCBYCR }, + { V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CIODMAFMT_YCRYCB }, + { V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CIODMAFMT_CBYCRY }, + { V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY }, + }; + u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT); + int i = ARRAY_SIZE(pixcode); + + while (--i >= 0) + if (pixcode[i][0] == f->fmt->mbus_code) + break; + cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK; + writel(cfg | pixcode[i][1], dev->regs + FLITE_REG_CIODMAFMT); +} + +void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f) +{ + u32 cfg; + + /* Maximum output pixel size */ + cfg = readl(dev->regs + FLITE_REG_CIOCAN); + cfg &= ~FLITE_REG_CIOCAN_MASK; + cfg = (f->f_height << 16) | f->f_width; + writel(cfg, dev->regs + FLITE_REG_CIOCAN); + + /* DMA offsets */ + cfg = readl(dev->regs + FLITE_REG_CIOOFF); + cfg &= ~FLITE_REG_CIOOFF_MASK; + cfg |= (f->rect.top << 16) | f->rect.left; + writel(cfg, dev->regs + FLITE_REG_CIOOFF); +} + +/* Enable/disable output DMA, set output pixel size and offsets (composition) */ +void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f, + bool enable) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + + if (!enable) { + cfg |= FLITE_REG_CIGCTRL_ODMA_DISABLE; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + return; + } + + cfg &= ~FLITE_REG_CIGCTRL_ODMA_DISABLE; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + flite_hw_set_out_order(dev, f); + flite_hw_set_dma_window(dev, f); +} + +void flite_hw_dump_regs(struct fimc_lite *dev, const char *label) +{ + struct { + u32 offset; + const char * const name; + } registers[] = { + { 0x00, "CISRCSIZE" }, + { 0x04, "CIGCTRL" }, + { 0x08, "CIIMGCPT" }, + { 0x0c, "CICPTSEQ" }, + { 0x10, "CIWDOFST" }, + { 0x14, "CIWDOFST2" }, + { 0x18, "CIODMAFMT" }, + { 0x20, "CIOCAN" }, + { 0x24, "CIOOFF" }, + { 0x30, "CIOSA" }, + { 0x40, "CISTATUS" }, + { 0x44, "CISTATUS2" }, + { 0xf0, "CITHOLD" }, + { 0xfc, "CIGENERAL" }, + }; + u32 i; + + v4l2_info(&dev->subdev, "--- %s ---\n", label); + + for (i = 0; i < ARRAY_SIZE(registers); i++) { + u32 cfg = readl(dev->regs + registers[i].offset); + v4l2_info(&dev->subdev, "%9s: 0x%08x\n", + registers[i].name, cfg); + } +} diff --git a/drivers/media/platform/exynos4-is/fimc-lite-reg.h b/drivers/media/platform/exynos4-is/fimc-lite-reg.h new file mode 100644 index 00000000..39038394 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-lite-reg.h @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef FIMC_LITE_REG_H_ +#define FIMC_LITE_REG_H_ + +#include "fimc-lite.h" + +/* Camera Source size */ +#define FLITE_REG_CISRCSIZE 0x00 +#define FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR (0 << 14) +#define FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB (1 << 14) +#define FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY (2 << 14) +#define FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY (3 << 14) +#define FLITE_REG_CISRCSIZE_ORDER422_MASK (0x3 << 14) +#define FLITE_REG_CISRCSIZE_SIZE_CAM_MASK (0x3fff << 16 | 0x3fff) + +/* Global control */ +#define FLITE_REG_CIGCTRL 0x04 +#define FLITE_REG_CIGCTRL_YUV422_1P (0x1e << 24) +#define FLITE_REG_CIGCTRL_RAW8 (0x2a << 24) +#define FLITE_REG_CIGCTRL_RAW10 (0x2b << 24) +#define FLITE_REG_CIGCTRL_RAW12 (0x2c << 24) +#define FLITE_REG_CIGCTRL_RAW14 (0x2d << 24) +/* User defined formats. x = 0...15 */ +#define FLITE_REG_CIGCTRL_USER(x) ((0x30 + x - 1) << 24) +#define FLITE_REG_CIGCTRL_FMT_MASK (0x3f << 24) +#define FLITE_REG_CIGCTRL_SHADOWMASK_DISABLE (1 << 21) +#define FLITE_REG_CIGCTRL_ODMA_DISABLE (1 << 20) +#define FLITE_REG_CIGCTRL_SWRST_REQ (1 << 19) +#define FLITE_REG_CIGCTRL_SWRST_RDY (1 << 18) +#define FLITE_REG_CIGCTRL_SWRST (1 << 17) +#define FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR (1 << 15) +#define FLITE_REG_CIGCTRL_INVPOLPCLK (1 << 14) +#define FLITE_REG_CIGCTRL_INVPOLVSYNC (1 << 13) +#define FLITE_REG_CIGCTRL_INVPOLHREF (1 << 12) +/* Interrupts mask bits (1 disables an interrupt) */ +#define FLITE_REG_CIGCTRL_IRQ_LASTEN (1 << 8) +#define FLITE_REG_CIGCTRL_IRQ_ENDEN (1 << 7) +#define FLITE_REG_CIGCTRL_IRQ_STARTEN (1 << 6) +#define FLITE_REG_CIGCTRL_IRQ_OVFEN (1 << 5) +#define FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK (0xf << 5) +#define FLITE_REG_CIGCTRL_SELCAM_MIPI (1 << 3) + +/* Image Capture Enable */ +#define FLITE_REG_CIIMGCPT 0x08 +#define FLITE_REG_CIIMGCPT_IMGCPTEN (1 << 31) +#define FLITE_REG_CIIMGCPT_CPT_FREN (1 << 25) +#define FLITE_REG_CIIMGCPT_CPT_MOD_FRCNT (1 << 18) +#define FLITE_REG_CIIMGCPT_CPT_MOD_FREN (0 << 18) + +/* Capture Sequence */ +#define FLITE_REG_CICPTSEQ 0x0c + +/* Camera Window Offset */ +#define FLITE_REG_CIWDOFST 0x10 +#define FLITE_REG_CIWDOFST_WINOFSEN (1 << 31) +#define FLITE_REG_CIWDOFST_CLROVIY (1 << 31) +#define FLITE_REG_CIWDOFST_CLROVFICB (1 << 15) +#define FLITE_REG_CIWDOFST_CLROVFICR (1 << 14) +#define FLITE_REG_CIWDOFST_OFST_MASK ((0x1fff << 16) | 0x1fff) + +/* Camera Window Offset2 */ +#define FLITE_REG_CIWDOFST2 0x14 + +/* Camera Output DMA Format */ +#define FLITE_REG_CIODMAFMT 0x18 +#define FLITE_REG_CIODMAFMT_RAW_CON (1 << 15) +#define FLITE_REG_CIODMAFMT_PACK12 (1 << 14) +#define FLITE_REG_CIODMAFMT_YCBYCR (0 << 4) +#define FLITE_REG_CIODMAFMT_YCRYCB (1 << 4) +#define FLITE_REG_CIODMAFMT_CBYCRY (2 << 4) +#define FLITE_REG_CIODMAFMT_CRYCBY (3 << 4) +#define FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK (0x3 << 4) + +/* Camera Output Canvas */ +#define FLITE_REG_CIOCAN 0x20 +#define FLITE_REG_CIOCAN_MASK ((0x3fff << 16) | 0x3fff) + +/* Camera Output DMA Offset */ +#define FLITE_REG_CIOOFF 0x24 +#define FLITE_REG_CIOOFF_MASK ((0x3fff << 16) | 0x3fff) + +/* Camera Output DMA Start Address */ +#define FLITE_REG_CIOSA 0x30 + +/* Camera Status */ +#define FLITE_REG_CISTATUS 0x40 +#define FLITE_REG_CISTATUS_MIPI_VVALID (1 << 22) +#define FLITE_REG_CISTATUS_MIPI_HVALID (1 << 21) +#define FLITE_REG_CISTATUS_MIPI_DVALID (1 << 20) +#define FLITE_REG_CISTATUS_ITU_VSYNC (1 << 14) +#define FLITE_REG_CISTATUS_ITU_HREFF (1 << 13) +#define FLITE_REG_CISTATUS_OVFIY (1 << 10) +#define FLITE_REG_CISTATUS_OVFICB (1 << 9) +#define FLITE_REG_CISTATUS_OVFICR (1 << 8) +#define FLITE_REG_CISTATUS_IRQ_SRC_OVERFLOW (1 << 7) +#define FLITE_REG_CISTATUS_IRQ_SRC_LASTCAPEND (1 << 6) +#define FLITE_REG_CISTATUS_IRQ_SRC_FRMSTART (1 << 5) +#define FLITE_REG_CISTATUS_IRQ_SRC_FRMEND (1 << 4) +#define FLITE_REG_CISTATUS_IRQ_CAM (1 << 0) +#define FLITE_REG_CISTATUS_IRQ_MASK (0xf << 4) + +/* Camera Status2 */ +#define FLITE_REG_CISTATUS2 0x44 +#define FLITE_REG_CISTATUS2_LASTCAPEND (1 << 1) +#define FLITE_REG_CISTATUS2_FRMEND (1 << 0) + +/* Qos Threshold */ +#define FLITE_REG_CITHOLD 0xf0 +#define FLITE_REG_CITHOLD_W_QOS_EN (1 << 30) + +/* Camera General Purpose */ +#define FLITE_REG_CIGENERAL 0xfc +/* b0: 1 - camera B, 0 - camera A */ +#define FLITE_REG_CIGENERAL_CAM_B (1 << 0) + +/* ---------------------------------------------------------------------------- + * Function declarations + */ +void flite_hw_reset(struct fimc_lite *dev); +void flite_hw_clear_pending_irq(struct fimc_lite *dev); +u32 flite_hw_get_interrupt_source(struct fimc_lite *dev); +void flite_hw_clear_last_capture_end(struct fimc_lite *dev); +void flite_hw_set_interrupt_mask(struct fimc_lite *dev); +void flite_hw_capture_start(struct fimc_lite *dev); +void flite_hw_capture_stop(struct fimc_lite *dev); +void flite_hw_set_camera_bus(struct fimc_lite *dev, + struct fimc_source_info *s_info); +void flite_hw_set_camera_polarity(struct fimc_lite *dev, + struct fimc_source_info *cam); +void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f); +void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f); + +void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f, + bool enable); +void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f); +void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on); +void flite_hw_dump_regs(struct fimc_lite *dev, const char *label); + +static inline void flite_hw_set_output_addr(struct fimc_lite *dev, u32 paddr) +{ + writel(paddr, dev->regs + FLITE_REG_CIOSA); +} +#endif /* FIMC_LITE_REG_H */ diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c new file mode 100644 index 00000000..14bb7bc8 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-lite.c @@ -0,0 +1,1660 @@ +/* + * Samsung EXYNOS FIMC-LITE (camera host interface) driver +* + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define pr_fmt(fmt) "%s:%d " fmt, __func__, __LINE__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "fimc-core.h" +#include "fimc-lite.h" +#include "fimc-lite-reg.h" + +static int debug; +module_param(debug, int, 0644); + +static const struct fimc_fmt fimc_lite_formats[] = { + { + .name = "YUV 4:2:2 packed, YCbYCr", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = { 16 }, + .color = FIMC_FMT_YCBYCR422, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .flags = FMT_FLAGS_YUV, + }, { + .name = "YUV 4:2:2 packed, CbYCrY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = { 16 }, + .color = FIMC_FMT_CBYCRY422, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .flags = FMT_FLAGS_YUV, + }, { + .name = "YUV 4:2:2 packed, CrYCbY", + .fourcc = V4L2_PIX_FMT_VYUY, + .depth = { 16 }, + .color = FIMC_FMT_CRYCBY422, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_VYUY8_2X8, + .flags = FMT_FLAGS_YUV, + }, { + .name = "YUV 4:2:2 packed, YCrYCb", + .fourcc = V4L2_PIX_FMT_YVYU, + .depth = { 16 }, + .color = FIMC_FMT_YCRYCB422, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_YVYU8_2X8, + .flags = FMT_FLAGS_YUV, + }, { + .name = "RAW8 (GRBG)", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = { 8 }, + .color = FIMC_FMT_RAW8, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_SGRBG8_1X8, + .flags = FMT_FLAGS_RAW_BAYER, + }, { + .name = "RAW10 (GRBG)", + .fourcc = V4L2_PIX_FMT_SGRBG10, + .depth = { 10 }, + .color = FIMC_FMT_RAW10, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_SGRBG10_1X10, + .flags = FMT_FLAGS_RAW_BAYER, + }, { + .name = "RAW12 (GRBG)", + .fourcc = V4L2_PIX_FMT_SGRBG12, + .depth = { 12 }, + .color = FIMC_FMT_RAW12, + .memplanes = 1, + .mbus_code = V4L2_MBUS_FMT_SGRBG12_1X12, + .flags = FMT_FLAGS_RAW_BAYER, + }, +}; + +/** + * fimc_lite_find_format - lookup fimc color format by fourcc or media bus code + * @pixelformat: fourcc to match, ignored if null + * @mbus_code: media bus code to match, ignored if null + * @mask: the color format flags to match + * @index: index to the fimc_lite_formats array, ignored if negative + */ +static const struct fimc_fmt *fimc_lite_find_format(const u32 *pixelformat, + const u32 *mbus_code, unsigned int mask, int index) +{ + const struct fimc_fmt *fmt, *def_fmt = NULL; + unsigned int i; + int id = 0; + + if (index >= (int)ARRAY_SIZE(fimc_lite_formats)) + return NULL; + + for (i = 0; i < ARRAY_SIZE(fimc_lite_formats); ++i) { + fmt = &fimc_lite_formats[i]; + if (mask && !(fmt->flags & mask)) + continue; + if (pixelformat && fmt->fourcc == *pixelformat) + return fmt; + if (mbus_code && fmt->mbus_code == *mbus_code) + return fmt; + if (index == id) + def_fmt = fmt; + id++; + } + return def_fmt; +} + +/* Called with the media graph mutex held or @me stream_count > 0. */ +static struct v4l2_subdev *__find_remote_sensor(struct media_entity *me) +{ + struct media_pad *pad = &me->pads[0]; + struct v4l2_subdev *sd; + + while (pad->flags & MEDIA_PAD_FL_SINK) { + /* source pad */ + pad = media_entity_remote_source(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + sd = media_entity_to_v4l2_subdev(pad->entity); + + if (sd->grp_id == GRP_ID_FIMC_IS_SENSOR || + sd->grp_id == GRP_ID_SENSOR) + return sd; + /* sink pad */ + pad = &sd->entity.pads[0]; + } + return NULL; +} + +static int fimc_lite_hw_init(struct fimc_lite *fimc, bool isp_output) +{ + struct fimc_source_info *si; + unsigned long flags; + + if (fimc->sensor == NULL) + return -ENXIO; + + if (fimc->inp_frame.fmt == NULL || fimc->out_frame.fmt == NULL) + return -EINVAL; + + /* Get sensor configuration data from the sensor subdev */ + si = v4l2_get_subdev_hostdata(fimc->sensor); + if (!si) + return -EINVAL; + + spin_lock_irqsave(&fimc->slock, flags); + + flite_hw_set_camera_bus(fimc, si); + flite_hw_set_source_format(fimc, &fimc->inp_frame); + flite_hw_set_window_offset(fimc, &fimc->inp_frame); + flite_hw_set_output_dma(fimc, &fimc->out_frame, !isp_output); + flite_hw_set_interrupt_mask(fimc); + flite_hw_set_test_pattern(fimc, fimc->test_pattern->val); + + if (debug > 0) + flite_hw_dump_regs(fimc, __func__); + + spin_unlock_irqrestore(&fimc->slock, flags); + return 0; +} + +/* + * Reinitialize the driver so it is ready to start the streaming again. + * Set fimc->state to indicate stream off and the hardware shut down state. + * If not suspending (@suspend is false), return any buffers to videobuf2. + * Otherwise put any owned buffers onto the pending buffers queue, so they + * can be re-spun when the device is being resumed. Also perform FIMC + * software reset and disable streaming on the whole pipeline if required. + */ +static int fimc_lite_reinit(struct fimc_lite *fimc, bool suspend) +{ + struct flite_buffer *buf; + unsigned long flags; + bool streaming; + + spin_lock_irqsave(&fimc->slock, flags); + streaming = fimc->state & (1 << ST_SENSOR_STREAM); + + fimc->state &= ~(1 << ST_FLITE_RUN | 1 << ST_FLITE_OFF | + 1 << ST_FLITE_STREAM | 1 << ST_SENSOR_STREAM); + if (suspend) + fimc->state |= (1 << ST_FLITE_SUSPENDED); + else + fimc->state &= ~(1 << ST_FLITE_PENDING | + 1 << ST_FLITE_SUSPENDED); + + /* Release unused buffers */ + while (!suspend && !list_empty(&fimc->pending_buf_q)) { + buf = fimc_lite_pending_queue_pop(fimc); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + /* If suspending put unused buffers onto pending queue */ + while (!list_empty(&fimc->active_buf_q)) { + buf = fimc_lite_active_queue_pop(fimc); + if (suspend) + fimc_lite_pending_queue_add(fimc, buf); + else + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + + spin_unlock_irqrestore(&fimc->slock, flags); + + flite_hw_reset(fimc); + + if (!streaming) + return 0; + + return fimc_pipeline_call(fimc, set_stream, &fimc->pipeline, 0); +} + +static int fimc_lite_stop_capture(struct fimc_lite *fimc, bool suspend) +{ + unsigned long flags; + + if (!fimc_lite_active(fimc)) + return 0; + + spin_lock_irqsave(&fimc->slock, flags); + set_bit(ST_FLITE_OFF, &fimc->state); + flite_hw_capture_stop(fimc); + spin_unlock_irqrestore(&fimc->slock, flags); + + wait_event_timeout(fimc->irq_queue, + !test_bit(ST_FLITE_OFF, &fimc->state), + (2*HZ/10)); /* 200 ms */ + + return fimc_lite_reinit(fimc, suspend); +} + +/* Must be called with fimc.slock spinlock held. */ +static void fimc_lite_config_update(struct fimc_lite *fimc) +{ + flite_hw_set_window_offset(fimc, &fimc->inp_frame); + flite_hw_set_dma_window(fimc, &fimc->out_frame); + flite_hw_set_test_pattern(fimc, fimc->test_pattern->val); + clear_bit(ST_FLITE_CONFIG, &fimc->state); +} + +static irqreturn_t flite_irq_handler(int irq, void *priv) +{ + struct fimc_lite *fimc = priv; + struct flite_buffer *vbuf; + unsigned long flags; + struct timeval *tv; + struct timespec ts; + u32 intsrc; + + spin_lock_irqsave(&fimc->slock, flags); + + intsrc = flite_hw_get_interrupt_source(fimc); + flite_hw_clear_pending_irq(fimc); + + if (test_and_clear_bit(ST_FLITE_OFF, &fimc->state)) { + wake_up(&fimc->irq_queue); + goto done; + } + + if (intsrc & FLITE_REG_CISTATUS_IRQ_SRC_OVERFLOW) { + clear_bit(ST_FLITE_RUN, &fimc->state); + fimc->events.data_overflow++; + } + + if (intsrc & FLITE_REG_CISTATUS_IRQ_SRC_LASTCAPEND) { + flite_hw_clear_last_capture_end(fimc); + clear_bit(ST_FLITE_STREAM, &fimc->state); + wake_up(&fimc->irq_queue); + } + + if (atomic_read(&fimc->out_path) != FIMC_IO_DMA) + goto done; + + if ((intsrc & FLITE_REG_CISTATUS_IRQ_SRC_FRMSTART) && + test_bit(ST_FLITE_RUN, &fimc->state) && + !list_empty(&fimc->active_buf_q) && + !list_empty(&fimc->pending_buf_q)) { + vbuf = fimc_lite_active_queue_pop(fimc); + ktime_get_ts(&ts); + tv = &vbuf->vb.v4l2_buf.timestamp; + tv->tv_sec = ts.tv_sec; + tv->tv_usec = ts.tv_nsec / NSEC_PER_USEC; + vbuf->vb.v4l2_buf.sequence = fimc->frame_count++; + vb2_buffer_done(&vbuf->vb, VB2_BUF_STATE_DONE); + + vbuf = fimc_lite_pending_queue_pop(fimc); + flite_hw_set_output_addr(fimc, vbuf->paddr); + fimc_lite_active_queue_add(fimc, vbuf); + } + + if (test_bit(ST_FLITE_CONFIG, &fimc->state)) + fimc_lite_config_update(fimc); + + if (list_empty(&fimc->pending_buf_q)) { + flite_hw_capture_stop(fimc); + clear_bit(ST_FLITE_STREAM, &fimc->state); + } +done: + set_bit(ST_FLITE_RUN, &fimc->state); + spin_unlock_irqrestore(&fimc->slock, flags); + return IRQ_HANDLED; +} + +static int start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct fimc_lite *fimc = q->drv_priv; + int ret; + + fimc->frame_count = 0; + + ret = fimc_lite_hw_init(fimc, false); + if (ret) { + fimc_lite_reinit(fimc, false); + return ret; + } + + set_bit(ST_FLITE_PENDING, &fimc->state); + + if (!list_empty(&fimc->active_buf_q) && + !test_and_set_bit(ST_FLITE_STREAM, &fimc->state)) { + flite_hw_capture_start(fimc); + + if (!test_and_set_bit(ST_SENSOR_STREAM, &fimc->state)) + fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 1); + } + if (debug > 0) + flite_hw_dump_regs(fimc, __func__); + + return 0; +} + +static int stop_streaming(struct vb2_queue *q) +{ + struct fimc_lite *fimc = q->drv_priv; + + if (!fimc_lite_active(fimc)) + return -EINVAL; + + return fimc_lite_stop_capture(fimc, false); +} + +static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *pfmt, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *allocators[]) +{ + const struct v4l2_pix_format_mplane *pixm = NULL; + struct fimc_lite *fimc = vq->drv_priv; + struct flite_frame *frame = &fimc->out_frame; + const struct fimc_fmt *fmt = frame->fmt; + unsigned long wh; + int i; + + if (pfmt) { + pixm = &pfmt->fmt.pix_mp; + fmt = fimc_lite_find_format(&pixm->pixelformat, NULL, 0, -1); + wh = pixm->width * pixm->height; + } else { + wh = frame->f_width * frame->f_height; + } + + if (fmt == NULL) + return -EINVAL; + + *num_planes = fmt->memplanes; + + for (i = 0; i < fmt->memplanes; i++) { + unsigned int size = (wh * fmt->depth[i]) / 8; + if (pixm) + sizes[i] = max(size, pixm->plane_fmt[i].sizeimage); + else + sizes[i] = size; + allocators[i] = fimc->alloc_ctx; + } + + return 0; +} + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_queue *vq = vb->vb2_queue; + struct fimc_lite *fimc = vq->drv_priv; + int i; + + if (fimc->out_frame.fmt == NULL) + return -EINVAL; + + for (i = 0; i < fimc->out_frame.fmt->memplanes; i++) { + unsigned long size = fimc->payload[i]; + + if (vb2_plane_size(vb, i) < size) { + v4l2_err(&fimc->vfd, + "User buffer too small (%ld < %ld)\n", + vb2_plane_size(vb, i), size); + return -EINVAL; + } + vb2_set_plane_payload(vb, i, size); + } + + return 0; +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + struct flite_buffer *buf + = container_of(vb, struct flite_buffer, vb); + struct fimc_lite *fimc = vb2_get_drv_priv(vb->vb2_queue); + unsigned long flags; + + spin_lock_irqsave(&fimc->slock, flags); + buf->paddr = vb2_dma_contig_plane_dma_addr(vb, 0); + + if (!test_bit(ST_FLITE_SUSPENDED, &fimc->state) && + !test_bit(ST_FLITE_STREAM, &fimc->state) && + list_empty(&fimc->active_buf_q)) { + flite_hw_set_output_addr(fimc, buf->paddr); + fimc_lite_active_queue_add(fimc, buf); + } else { + fimc_lite_pending_queue_add(fimc, buf); + } + + if (vb2_is_streaming(&fimc->vb_queue) && + !list_empty(&fimc->pending_buf_q) && + !test_and_set_bit(ST_FLITE_STREAM, &fimc->state)) { + flite_hw_capture_start(fimc); + spin_unlock_irqrestore(&fimc->slock, flags); + + if (!test_and_set_bit(ST_SENSOR_STREAM, &fimc->state)) + fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 1); + return; + } + spin_unlock_irqrestore(&fimc->slock, flags); +} + +static const struct vb2_ops fimc_lite_qops = { + .queue_setup = queue_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, +}; + +static void fimc_lite_clear_event_counters(struct fimc_lite *fimc) +{ + unsigned long flags; + + spin_lock_irqsave(&fimc->slock, flags); + memset(&fimc->events, 0, sizeof(fimc->events)); + spin_unlock_irqrestore(&fimc->slock, flags); +} + +static int fimc_lite_open(struct file *file) +{ + struct fimc_lite *fimc = video_drvdata(file); + struct media_entity *me = &fimc->vfd.entity; + int ret; + + mutex_lock(&me->parent->graph_mutex); + + mutex_lock(&fimc->lock); + if (atomic_read(&fimc->out_path) != FIMC_IO_DMA) { + ret = -EBUSY; + goto unlock; + } + + set_bit(ST_FLITE_IN_USE, &fimc->state); + ret = pm_runtime_get_sync(&fimc->pdev->dev); + if (ret < 0) + goto unlock; + + ret = v4l2_fh_open(file); + if (ret < 0) + goto err_pm; + + if (!v4l2_fh_is_singular_file(file) || + atomic_read(&fimc->out_path) != FIMC_IO_DMA) + goto unlock; + + ret = fimc_pipeline_call(fimc, open, &fimc->pipeline, + me, true); + if (!ret) { + fimc_lite_clear_event_counters(fimc); + fimc->ref_count++; + goto unlock; + } + + v4l2_fh_release(file); +err_pm: + pm_runtime_put_sync(&fimc->pdev->dev); + clear_bit(ST_FLITE_IN_USE, &fimc->state); +unlock: + mutex_unlock(&fimc->lock); + mutex_unlock(&me->parent->graph_mutex); + return ret; +} + +static int fimc_lite_release(struct file *file) +{ + struct fimc_lite *fimc = video_drvdata(file); + + mutex_lock(&fimc->lock); + + if (v4l2_fh_is_singular_file(file) && + atomic_read(&fimc->out_path) == FIMC_IO_DMA) { + if (fimc->streaming) { + media_entity_pipeline_stop(&fimc->vfd.entity); + fimc->streaming = false; + } + clear_bit(ST_FLITE_IN_USE, &fimc->state); + fimc_lite_stop_capture(fimc, false); + fimc_pipeline_call(fimc, close, &fimc->pipeline); + fimc->ref_count--; + } + + vb2_fop_release(file); + pm_runtime_put(&fimc->pdev->dev); + clear_bit(ST_FLITE_SUSPENDED, &fimc->state); + + mutex_unlock(&fimc->lock); + return 0; +} + +static const struct v4l2_file_operations fimc_lite_fops = { + .owner = THIS_MODULE, + .open = fimc_lite_open, + .release = fimc_lite_release, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = vb2_fop_mmap, +}; + +/* + * Format and crop negotiation helpers + */ + +static const struct fimc_fmt *fimc_lite_try_format(struct fimc_lite *fimc, + u32 *width, u32 *height, + u32 *code, u32 *fourcc, int pad) +{ + struct flite_drvdata *dd = fimc->dd; + const struct fimc_fmt *fmt; + unsigned int flags = 0; + + if (pad == FLITE_SD_PAD_SINK) { + v4l_bound_align_image(width, 8, dd->max_width, + ffs(dd->out_width_align) - 1, + height, 0, dd->max_height, 0, 0); + } else { + v4l_bound_align_image(width, 8, fimc->inp_frame.rect.width, + ffs(dd->out_width_align) - 1, + height, 0, fimc->inp_frame.rect.height, + 0, 0); + flags = fimc->inp_frame.fmt->flags; + } + + fmt = fimc_lite_find_format(fourcc, code, flags, 0); + if (WARN_ON(!fmt)) + return NULL; + + if (code) + *code = fmt->mbus_code; + if (fourcc) + *fourcc = fmt->fourcc; + + v4l2_dbg(1, debug, &fimc->subdev, "code: 0x%x, %dx%d\n", + code ? *code : 0, *width, *height); + + return fmt; +} + +static void fimc_lite_try_crop(struct fimc_lite *fimc, struct v4l2_rect *r) +{ + struct flite_frame *frame = &fimc->inp_frame; + + v4l_bound_align_image(&r->width, 0, frame->f_width, 0, + &r->height, 0, frame->f_height, 0, 0); + + /* Adjust left/top if cropping rectangle got out of bounds */ + r->left = clamp_t(u32, r->left, 0, frame->f_width - r->width); + r->left = round_down(r->left, fimc->dd->win_hor_offs_align); + r->top = clamp_t(u32, r->top, 0, frame->f_height - r->height); + + v4l2_dbg(1, debug, &fimc->subdev, "(%d,%d)/%dx%d, sink fmt: %dx%d\n", + r->left, r->top, r->width, r->height, + frame->f_width, frame->f_height); +} + +static void fimc_lite_try_compose(struct fimc_lite *fimc, struct v4l2_rect *r) +{ + struct flite_frame *frame = &fimc->out_frame; + struct v4l2_rect *crop_rect = &fimc->inp_frame.rect; + + /* Scaling is not supported so we enforce compose rectangle size + same as size of the sink crop rectangle. */ + r->width = crop_rect->width; + r->height = crop_rect->height; + + /* Adjust left/top if the composing rectangle got out of bounds */ + r->left = clamp_t(u32, r->left, 0, frame->f_width - r->width); + r->left = round_down(r->left, fimc->dd->out_hor_offs_align); + r->top = clamp_t(u32, r->top, 0, fimc->out_frame.f_height - r->height); + + v4l2_dbg(1, debug, &fimc->subdev, "(%d,%d)/%dx%d, source fmt: %dx%d\n", + r->left, r->top, r->width, r->height, + frame->f_width, frame->f_height); +} + +/* + * Video node ioctl operations + */ +static int fimc_vidioc_querycap_capture(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, FIMC_LITE_DRV_NAME, sizeof(cap->driver)); + cap->bus_info[0] = 0; + cap->card[0] = 0; + cap->capabilities = V4L2_CAP_STREAMING; + return 0; +} + +static int fimc_lite_enum_fmt_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + const struct fimc_fmt *fmt; + + if (f->index >= ARRAY_SIZE(fimc_lite_formats)) + return -EINVAL; + + fmt = &fimc_lite_formats[f->index]; + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; + + return 0; +} + +static int fimc_lite_g_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct fimc_lite *fimc = video_drvdata(file); + struct v4l2_pix_format_mplane *pixm = &f->fmt.pix_mp; + struct v4l2_plane_pix_format *plane_fmt = &pixm->plane_fmt[0]; + struct flite_frame *frame = &fimc->out_frame; + const struct fimc_fmt *fmt = frame->fmt; + + plane_fmt->bytesperline = (frame->f_width * fmt->depth[0]) / 8; + plane_fmt->sizeimage = plane_fmt->bytesperline * frame->f_height; + + pixm->num_planes = fmt->memplanes; + pixm->pixelformat = fmt->fourcc; + pixm->width = frame->f_width; + pixm->height = frame->f_height; + pixm->field = V4L2_FIELD_NONE; + pixm->colorspace = V4L2_COLORSPACE_JPEG; + return 0; +} + +static int fimc_lite_try_fmt(struct fimc_lite *fimc, + struct v4l2_pix_format_mplane *pixm, + const struct fimc_fmt **ffmt) +{ + u32 bpl = pixm->plane_fmt[0].bytesperline; + struct flite_drvdata *dd = fimc->dd; + const struct fimc_fmt *inp_fmt = fimc->inp_frame.fmt; + const struct fimc_fmt *fmt; + + if (WARN_ON(inp_fmt == NULL)) + return -EINVAL; + /* + * We allow some flexibility only for YUV formats. In case of raw + * raw Bayer the FIMC-LITE's output format must match its camera + * interface input format. + */ + if (inp_fmt->flags & FMT_FLAGS_YUV) + fmt = fimc_lite_find_format(&pixm->pixelformat, NULL, + inp_fmt->flags, 0); + else + fmt = inp_fmt; + + if (WARN_ON(fmt == NULL)) + return -EINVAL; + if (ffmt) + *ffmt = fmt; + v4l_bound_align_image(&pixm->width, 8, dd->max_width, + ffs(dd->out_width_align) - 1, + &pixm->height, 0, dd->max_height, 0, 0); + + if ((bpl == 0 || ((bpl * 8) / fmt->depth[0]) < pixm->width)) + pixm->plane_fmt[0].bytesperline = (pixm->width * + fmt->depth[0]) / 8; + + if (pixm->plane_fmt[0].sizeimage == 0) + pixm->plane_fmt[0].sizeimage = (pixm->width * pixm->height * + fmt->depth[0]) / 8; + pixm->num_planes = fmt->memplanes; + pixm->pixelformat = fmt->fourcc; + pixm->colorspace = V4L2_COLORSPACE_JPEG; + pixm->field = V4L2_FIELD_NONE; + return 0; +} + +static int fimc_lite_try_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct fimc_lite *fimc = video_drvdata(file); + return fimc_lite_try_fmt(fimc, &f->fmt.pix_mp, NULL); +} + +static int fimc_lite_s_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct v4l2_pix_format_mplane *pixm = &f->fmt.pix_mp; + struct fimc_lite *fimc = video_drvdata(file); + struct flite_frame *frame = &fimc->out_frame; + const struct fimc_fmt *fmt = NULL; + int ret; + + if (vb2_is_busy(&fimc->vb_queue)) + return -EBUSY; + + ret = fimc_lite_try_fmt(fimc, &f->fmt.pix_mp, &fmt); + if (ret < 0) + return ret; + + frame->fmt = fmt; + fimc->payload[0] = max((pixm->width * pixm->height * fmt->depth[0]) / 8, + pixm->plane_fmt[0].sizeimage); + frame->f_width = pixm->width; + frame->f_height = pixm->height; + + return 0; +} + +static int fimc_pipeline_validate(struct fimc_lite *fimc) +{ + struct v4l2_subdev *sd = &fimc->subdev; + struct v4l2_subdev_format sink_fmt, src_fmt; + struct media_pad *pad; + int ret; + + while (1) { + /* Retrieve format at the sink pad */ + pad = &sd->entity.pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + /* Don't call FIMC subdev operation to avoid nested locking */ + if (sd == &fimc->subdev) { + struct flite_frame *ff = &fimc->out_frame; + sink_fmt.format.width = ff->f_width; + sink_fmt.format.height = ff->f_height; + sink_fmt.format.code = fimc->inp_frame.fmt->mbus_code; + } else { + sink_fmt.pad = pad->index; + sink_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, + &sink_fmt); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + } + /* Retrieve format at the source pad */ + pad = media_entity_remote_source(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + sd = media_entity_to_v4l2_subdev(pad->entity); + src_fmt.pad = pad->index; + src_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &src_fmt); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + + if (src_fmt.format.width != sink_fmt.format.width || + src_fmt.format.height != sink_fmt.format.height || + src_fmt.format.code != sink_fmt.format.code) + return -EPIPE; + } + return 0; +} + +static int fimc_lite_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct fimc_lite *fimc = video_drvdata(file); + struct media_entity *entity = &fimc->vfd.entity; + struct fimc_pipeline *p = &fimc->pipeline; + int ret; + + if (fimc_lite_active(fimc)) + return -EBUSY; + + ret = media_entity_pipeline_start(entity, p->m_pipeline); + if (ret < 0) + return ret; + + ret = fimc_pipeline_validate(fimc); + if (ret < 0) + goto err_p_stop; + + fimc->sensor = __find_remote_sensor(&fimc->subdev.entity); + + ret = vb2_ioctl_streamon(file, priv, type); + if (!ret) { + fimc->streaming = true; + return ret; + } + +err_p_stop: + media_entity_pipeline_stop(entity); + return 0; +} + +static int fimc_lite_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct fimc_lite *fimc = video_drvdata(file); + int ret; + + ret = vb2_ioctl_streamoff(file, priv, type); + if (ret < 0) + return ret; + + media_entity_pipeline_stop(&fimc->vfd.entity); + fimc->streaming = false; + return 0; +} + +static int fimc_lite_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct fimc_lite *fimc = video_drvdata(file); + int ret; + + reqbufs->count = max_t(u32, FLITE_REQ_BUFS_MIN, reqbufs->count); + ret = vb2_ioctl_reqbufs(file, priv, reqbufs); + if (!ret) + fimc->reqbufs_count = reqbufs->count; + + return ret; +} + +/* Return 1 if rectangle a is enclosed in rectangle b, or 0 otherwise. */ +static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b) +{ + if (a->left < b->left || a->top < b->top) + return 0; + if (a->left + a->width > b->left + b->width) + return 0; + if (a->top + a->height > b->top + b->height) + return 0; + + return 1; +} + +static int fimc_lite_g_selection(struct file *file, void *fh, + struct v4l2_selection *sel) +{ + struct fimc_lite *fimc = video_drvdata(file); + struct flite_frame *f = &fimc->out_frame; + + if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return -EINVAL; + + switch (sel->target) { + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = f->f_width; + sel->r.height = f->f_height; + return 0; + + case V4L2_SEL_TGT_COMPOSE: + sel->r = f->rect; + return 0; + } + + return -EINVAL; +} + +static int fimc_lite_s_selection(struct file *file, void *fh, + struct v4l2_selection *sel) +{ + struct fimc_lite *fimc = video_drvdata(file); + struct flite_frame *f = &fimc->out_frame; + struct v4l2_rect rect = sel->r; + unsigned long flags; + + if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE || + sel->target != V4L2_SEL_TGT_COMPOSE) + return -EINVAL; + + fimc_lite_try_compose(fimc, &rect); + + if ((sel->flags & V4L2_SEL_FLAG_LE) && + !enclosed_rectangle(&rect, &sel->r)) + return -ERANGE; + + if ((sel->flags & V4L2_SEL_FLAG_GE) && + !enclosed_rectangle(&sel->r, &rect)) + return -ERANGE; + + sel->r = rect; + spin_lock_irqsave(&fimc->slock, flags); + f->rect = rect; + set_bit(ST_FLITE_CONFIG, &fimc->state); + spin_unlock_irqrestore(&fimc->slock, flags); + + return 0; +} + +static const struct v4l2_ioctl_ops fimc_lite_ioctl_ops = { + .vidioc_querycap = fimc_vidioc_querycap_capture, + .vidioc_enum_fmt_vid_cap_mplane = fimc_lite_enum_fmt_mplane, + .vidioc_try_fmt_vid_cap_mplane = fimc_lite_try_fmt_mplane, + .vidioc_s_fmt_vid_cap_mplane = fimc_lite_s_fmt_mplane, + .vidioc_g_fmt_vid_cap_mplane = fimc_lite_g_fmt_mplane, + .vidioc_g_selection = fimc_lite_g_selection, + .vidioc_s_selection = fimc_lite_s_selection, + .vidioc_reqbufs = fimc_lite_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = fimc_lite_streamon, + .vidioc_streamoff = fimc_lite_streamoff, +}; + +/* Capture subdev media entity operations */ +static int fimc_lite_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + unsigned int remote_ent_type = media_entity_type(remote->entity); + int ret = 0; + + if (WARN_ON(fimc == NULL)) + return 0; + + v4l2_dbg(1, debug, sd, "%s: %s --> %s, flags: 0x%x. source_id: 0x%x\n", + __func__, remote->entity->name, local->entity->name, + flags, fimc->source_subdev_grp_id); + + mutex_lock(&fimc->lock); + + switch (local->index) { + case FLITE_SD_PAD_SINK: + if (remote_ent_type != MEDIA_ENT_T_V4L2_SUBDEV) { + ret = -EINVAL; + break; + } + if (flags & MEDIA_LNK_FL_ENABLED) { + if (fimc->source_subdev_grp_id == 0) + fimc->source_subdev_grp_id = sd->grp_id; + else + ret = -EBUSY; + } else { + fimc->source_subdev_grp_id = 0; + fimc->sensor = NULL; + } + break; + + case FLITE_SD_PAD_SOURCE_DMA: + if (!(flags & MEDIA_LNK_FL_ENABLED)) + atomic_set(&fimc->out_path, FIMC_IO_NONE); + else if (remote_ent_type == MEDIA_ENT_T_DEVNODE) + atomic_set(&fimc->out_path, FIMC_IO_DMA); + else + ret = -EINVAL; + break; + + case FLITE_SD_PAD_SOURCE_ISP: + if (!(flags & MEDIA_LNK_FL_ENABLED)) + atomic_set(&fimc->out_path, FIMC_IO_NONE); + else if (remote_ent_type == MEDIA_ENT_T_V4L2_SUBDEV) + atomic_set(&fimc->out_path, FIMC_IO_ISP); + else + ret = -EINVAL; + break; + + default: + v4l2_err(sd, "Invalid pad index\n"); + ret = -EINVAL; + } + mb(); + + mutex_unlock(&fimc->lock); + return ret; +} + +static const struct media_entity_operations fimc_lite_subdev_media_ops = { + .link_setup = fimc_lite_link_setup, +}; + +static int fimc_lite_subdev_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + const struct fimc_fmt *fmt; + + fmt = fimc_lite_find_format(NULL, NULL, 0, code->index); + if (!fmt) + return -EINVAL; + code->code = fmt->mbus_code; + return 0; +} + +static int fimc_lite_subdev_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *mf = &fmt->format; + struct flite_frame *f = &fimc->inp_frame; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + fmt->format = *mf; + return 0; + } + mf->colorspace = V4L2_COLORSPACE_JPEG; + + mutex_lock(&fimc->lock); + mf->code = f->fmt->mbus_code; + + if (fmt->pad == FLITE_SD_PAD_SINK) { + /* full camera input frame size */ + mf->width = f->f_width; + mf->height = f->f_height; + } else { + /* crop size */ + mf->width = f->rect.width; + mf->height = f->rect.height; + } + mutex_unlock(&fimc->lock); + return 0; +} + +static int fimc_lite_subdev_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *mf = &fmt->format; + struct flite_frame *sink = &fimc->inp_frame; + struct flite_frame *source = &fimc->out_frame; + const struct fimc_fmt *ffmt; + + v4l2_dbg(1, debug, sd, "pad%d: code: 0x%x, %dx%d\n", + fmt->pad, mf->code, mf->width, mf->height); + + mf->colorspace = V4L2_COLORSPACE_JPEG; + mutex_lock(&fimc->lock); + + if ((atomic_read(&fimc->out_path) == FIMC_IO_ISP && + sd->entity.stream_count > 0) || + (atomic_read(&fimc->out_path) == FIMC_IO_DMA && + vb2_is_busy(&fimc->vb_queue))) { + mutex_unlock(&fimc->lock); + return -EBUSY; + } + + ffmt = fimc_lite_try_format(fimc, &mf->width, &mf->height, + &mf->code, NULL, fmt->pad); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + *mf = fmt->format; + mutex_unlock(&fimc->lock); + return 0; + } + + if (fmt->pad == FLITE_SD_PAD_SINK) { + sink->f_width = mf->width; + sink->f_height = mf->height; + sink->fmt = ffmt; + /* Set sink crop rectangle */ + sink->rect.width = mf->width; + sink->rect.height = mf->height; + sink->rect.left = 0; + sink->rect.top = 0; + /* Reset source format and crop rectangle */ + source->rect = sink->rect; + source->f_width = mf->width; + source->f_height = mf->height; + } else { + /* Allow changing format only on sink pad */ + mf->code = sink->fmt->mbus_code; + mf->width = sink->rect.width; + mf->height = sink->rect.height; + } + + mutex_unlock(&fimc->lock); + return 0; +} + +static int fimc_lite_subdev_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + struct flite_frame *f = &fimc->inp_frame; + + if ((sel->target != V4L2_SEL_TGT_CROP && + sel->target != V4L2_SEL_TGT_CROP_BOUNDS) || + sel->pad != FLITE_SD_PAD_SINK) + return -EINVAL; + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { + sel->r = *v4l2_subdev_get_try_crop(fh, sel->pad); + return 0; + } + + mutex_lock(&fimc->lock); + if (sel->target == V4L2_SEL_TGT_CROP) { + sel->r = f->rect; + } else { + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = f->f_width; + sel->r.height = f->f_height; + } + mutex_unlock(&fimc->lock); + + v4l2_dbg(1, debug, sd, "%s: (%d,%d) %dx%d, f_w: %d, f_h: %d\n", + __func__, f->rect.left, f->rect.top, f->rect.width, + f->rect.height, f->f_width, f->f_height); + + return 0; +} + +static int fimc_lite_subdev_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + struct flite_frame *f = &fimc->inp_frame; + int ret = 0; + + if (sel->target != V4L2_SEL_TGT_CROP || sel->pad != FLITE_SD_PAD_SINK) + return -EINVAL; + + mutex_lock(&fimc->lock); + fimc_lite_try_crop(fimc, &sel->r); + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { + *v4l2_subdev_get_try_crop(fh, sel->pad) = sel->r; + } else { + unsigned long flags; + spin_lock_irqsave(&fimc->slock, flags); + f->rect = sel->r; + /* Same crop rectangle on the source pad */ + fimc->out_frame.rect = sel->r; + set_bit(ST_FLITE_CONFIG, &fimc->state); + spin_unlock_irqrestore(&fimc->slock, flags); + } + mutex_unlock(&fimc->lock); + + v4l2_dbg(1, debug, sd, "%s: (%d,%d) %dx%d, f_w: %d, f_h: %d\n", + __func__, f->rect.left, f->rect.top, f->rect.width, + f->rect.height, f->f_width, f->f_height); + + return ret; +} + +static int fimc_lite_subdev_s_stream(struct v4l2_subdev *sd, int on) +{ + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + unsigned long flags; + int ret; + + /* + * Find sensor subdev linked to FIMC-LITE directly or through + * MIPI-CSIS. This is required for configuration where FIMC-LITE + * is used as a subdev only and feeds data internally to FIMC-IS. + * The pipeline links are protected through entity.stream_count + * so there is no need to take the media graph mutex here. + */ + fimc->sensor = __find_remote_sensor(&sd->entity); + + if (atomic_read(&fimc->out_path) != FIMC_IO_ISP) + return -ENOIOCTLCMD; + + mutex_lock(&fimc->lock); + if (on) { + flite_hw_reset(fimc); + ret = fimc_lite_hw_init(fimc, true); + if (!ret) { + spin_lock_irqsave(&fimc->slock, flags); + flite_hw_capture_start(fimc); + spin_unlock_irqrestore(&fimc->slock, flags); + } + } else { + set_bit(ST_FLITE_OFF, &fimc->state); + + spin_lock_irqsave(&fimc->slock, flags); + flite_hw_capture_stop(fimc); + spin_unlock_irqrestore(&fimc->slock, flags); + + ret = wait_event_timeout(fimc->irq_queue, + !test_bit(ST_FLITE_OFF, &fimc->state), + msecs_to_jiffies(200)); + if (ret == 0) + v4l2_err(sd, "s_stream(0) timeout\n"); + clear_bit(ST_FLITE_RUN, &fimc->state); + } + + mutex_unlock(&fimc->lock); + return ret; +} + +static int fimc_lite_log_status(struct v4l2_subdev *sd) +{ + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + + flite_hw_dump_regs(fimc, __func__); + return 0; +} + +static int fimc_lite_subdev_registered(struct v4l2_subdev *sd) +{ + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + struct vb2_queue *q = &fimc->vb_queue; + struct video_device *vfd = &fimc->vfd; + int ret; + + memset(vfd, 0, sizeof(*vfd)); + + fimc->inp_frame.fmt = &fimc_lite_formats[0]; + fimc->out_frame.fmt = &fimc_lite_formats[0]; + atomic_set(&fimc->out_path, FIMC_IO_DMA); + + snprintf(vfd->name, sizeof(vfd->name), "fimc-lite.%d.capture", + fimc->index); + + vfd->fops = &fimc_lite_fops; + vfd->ioctl_ops = &fimc_lite_ioctl_ops; + vfd->v4l2_dev = sd->v4l2_dev; + vfd->minor = -1; + vfd->release = video_device_release_empty; + vfd->queue = q; + fimc->reqbufs_count = 0; + + INIT_LIST_HEAD(&fimc->pending_buf_q); + INIT_LIST_HEAD(&fimc->active_buf_q); + + memset(q, 0, sizeof(*q)); + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->ops = &fimc_lite_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct flite_buffer); + q->drv_priv = fimc; + q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->lock = &fimc->lock; + + ret = vb2_queue_init(q); + if (ret < 0) + return ret; + + fimc->vd_pad.flags = MEDIA_PAD_FL_SINK; + ret = media_entity_init(&vfd->entity, 1, &fimc->vd_pad, 0); + if (ret < 0) + return ret; + + video_set_drvdata(vfd, fimc); + fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd); + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1); + if (ret < 0) { + media_entity_cleanup(&vfd->entity); + fimc->pipeline_ops = NULL; + return ret; + } + + v4l2_info(sd->v4l2_dev, "Registered %s as /dev/%s\n", + vfd->name, video_device_node_name(vfd)); + return 0; +} + +static void fimc_lite_subdev_unregistered(struct v4l2_subdev *sd) +{ + struct fimc_lite *fimc = v4l2_get_subdevdata(sd); + + if (fimc == NULL) + return; + + if (video_is_registered(&fimc->vfd)) { + video_unregister_device(&fimc->vfd); + media_entity_cleanup(&fimc->vfd.entity); + fimc->pipeline_ops = NULL; + } +} + +static const struct v4l2_subdev_internal_ops fimc_lite_subdev_internal_ops = { + .registered = fimc_lite_subdev_registered, + .unregistered = fimc_lite_subdev_unregistered, +}; + +static const struct v4l2_subdev_pad_ops fimc_lite_subdev_pad_ops = { + .enum_mbus_code = fimc_lite_subdev_enum_mbus_code, + .get_selection = fimc_lite_subdev_get_selection, + .set_selection = fimc_lite_subdev_set_selection, + .get_fmt = fimc_lite_subdev_get_fmt, + .set_fmt = fimc_lite_subdev_set_fmt, +}; + +static const struct v4l2_subdev_video_ops fimc_lite_subdev_video_ops = { + .s_stream = fimc_lite_subdev_s_stream, +}; + +static const struct v4l2_subdev_core_ops fimc_lite_core_ops = { + .log_status = fimc_lite_log_status, +}; + +static struct v4l2_subdev_ops fimc_lite_subdev_ops = { + .core = &fimc_lite_core_ops, + .video = &fimc_lite_subdev_video_ops, + .pad = &fimc_lite_subdev_pad_ops, +}; + +static int fimc_lite_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct fimc_lite *fimc = container_of(ctrl->handler, struct fimc_lite, + ctrl_handler); + set_bit(ST_FLITE_CONFIG, &fimc->state); + return 0; +} + +static const struct v4l2_ctrl_ops fimc_lite_ctrl_ops = { + .s_ctrl = fimc_lite_s_ctrl, +}; + +static const struct v4l2_ctrl_config fimc_lite_ctrl = { + .ops = &fimc_lite_ctrl_ops, + .id = V4L2_CTRL_CLASS_USER | 0x1001, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Test Pattern 640x480", + .step = 1, +}; + +static int fimc_lite_create_capture_subdev(struct fimc_lite *fimc) +{ + struct v4l2_ctrl_handler *handler = &fimc->ctrl_handler; + struct v4l2_subdev *sd = &fimc->subdev; + int ret; + + v4l2_subdev_init(sd, &fimc_lite_subdev_ops); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + snprintf(sd->name, sizeof(sd->name), "FIMC-LITE.%d", fimc->index); + + fimc->subdev_pads[FLITE_SD_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + fimc->subdev_pads[FLITE_SD_PAD_SOURCE_DMA].flags = MEDIA_PAD_FL_SOURCE; + fimc->subdev_pads[FLITE_SD_PAD_SOURCE_ISP].flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sd->entity, FLITE_SD_PADS_NUM, + fimc->subdev_pads, 0); + if (ret) + return ret; + + v4l2_ctrl_handler_init(handler, 1); + fimc->test_pattern = v4l2_ctrl_new_custom(handler, &fimc_lite_ctrl, + NULL); + if (handler->error) { + media_entity_cleanup(&sd->entity); + return handler->error; + } + + sd->ctrl_handler = handler; + sd->internal_ops = &fimc_lite_subdev_internal_ops; + sd->entity.ops = &fimc_lite_subdev_media_ops; + sd->owner = THIS_MODULE; + v4l2_set_subdevdata(sd, fimc); + + return 0; +} + +static void fimc_lite_unregister_capture_subdev(struct fimc_lite *fimc) +{ + struct v4l2_subdev *sd = &fimc->subdev; + + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(&fimc->ctrl_handler); + v4l2_set_subdevdata(sd, NULL); +} + +static void fimc_lite_clk_put(struct fimc_lite *fimc) +{ + if (IS_ERR_OR_NULL(fimc->clock)) + return; + + clk_unprepare(fimc->clock); + clk_put(fimc->clock); + fimc->clock = NULL; +} + +static int fimc_lite_clk_get(struct fimc_lite *fimc) +{ + int ret; + + fimc->clock = clk_get(&fimc->pdev->dev, FLITE_CLK_NAME); + if (IS_ERR(fimc->clock)) + return PTR_ERR(fimc->clock); + + ret = clk_prepare(fimc->clock); + if (ret < 0) { + clk_put(fimc->clock); + fimc->clock = NULL; + } + return ret; +} + +static const struct of_device_id flite_of_match[]; + +static int fimc_lite_probe(struct platform_device *pdev) +{ + struct flite_drvdata *drv_data = NULL; + struct device *dev = &pdev->dev; + const struct of_device_id *of_id; + struct fimc_lite *fimc; + struct resource *res; + int ret; + + fimc = devm_kzalloc(dev, sizeof(*fimc), GFP_KERNEL); + if (!fimc) + return -ENOMEM; + + if (dev->of_node) { + of_id = of_match_node(flite_of_match, dev->of_node); + if (of_id) + drv_data = (struct flite_drvdata *)of_id->data; + fimc->index = of_alias_get_id(dev->of_node, "fimc-lite"); + } else { + drv_data = fimc_lite_get_drvdata(pdev); + fimc->index = pdev->id; + } + + if (!drv_data || fimc->index < 0 || fimc->index >= FIMC_LITE_MAX_DEVS) + return -EINVAL; + + fimc->dd = drv_data; + fimc->pdev = pdev; + + init_waitqueue_head(&fimc->irq_queue); + spin_lock_init(&fimc->slock); + mutex_init(&fimc->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + fimc->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(fimc->regs)) + return PTR_ERR(fimc->regs); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(dev, "Failed to get IRQ resource\n"); + return -ENXIO; + } + + ret = fimc_lite_clk_get(fimc); + if (ret) + return ret; + + ret = devm_request_irq(dev, res->start, flite_irq_handler, + 0, dev_name(dev), fimc); + if (ret) { + dev_err(dev, "Failed to install irq (%d)\n", ret); + goto err_clk; + } + + /* The video node will be created within the subdev's registered() op */ + ret = fimc_lite_create_capture_subdev(fimc); + if (ret) + goto err_clk; + + platform_set_drvdata(pdev, fimc); + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto err_sd; + + fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev); + if (IS_ERR(fimc->alloc_ctx)) { + ret = PTR_ERR(fimc->alloc_ctx); + goto err_pm; + } + pm_runtime_put(dev); + + dev_dbg(dev, "FIMC-LITE.%d registered successfully\n", + fimc->index); + return 0; +err_pm: + pm_runtime_put(dev); +err_sd: + fimc_lite_unregister_capture_subdev(fimc); +err_clk: + fimc_lite_clk_put(fimc); + return ret; +} + +static int fimc_lite_runtime_resume(struct device *dev) +{ + struct fimc_lite *fimc = dev_get_drvdata(dev); + + clk_enable(fimc->clock); + return 0; +} + +static int fimc_lite_runtime_suspend(struct device *dev) +{ + struct fimc_lite *fimc = dev_get_drvdata(dev); + + clk_disable(fimc->clock); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int fimc_lite_resume(struct device *dev) +{ + struct fimc_lite *fimc = dev_get_drvdata(dev); + struct flite_buffer *buf; + unsigned long flags; + int i; + + spin_lock_irqsave(&fimc->slock, flags); + if (!test_and_clear_bit(ST_LPM, &fimc->state) || + !test_bit(ST_FLITE_IN_USE, &fimc->state)) { + spin_unlock_irqrestore(&fimc->slock, flags); + return 0; + } + flite_hw_reset(fimc); + spin_unlock_irqrestore(&fimc->slock, flags); + + if (!test_and_clear_bit(ST_FLITE_SUSPENDED, &fimc->state)) + return 0; + + INIT_LIST_HEAD(&fimc->active_buf_q); + fimc_pipeline_call(fimc, open, &fimc->pipeline, + &fimc->vfd.entity, false); + fimc_lite_hw_init(fimc, atomic_read(&fimc->out_path) == FIMC_IO_ISP); + clear_bit(ST_FLITE_SUSPENDED, &fimc->state); + + for (i = 0; i < fimc->reqbufs_count; i++) { + if (list_empty(&fimc->pending_buf_q)) + break; + buf = fimc_lite_pending_queue_pop(fimc); + buffer_queue(&buf->vb); + } + return 0; +} + +static int fimc_lite_suspend(struct device *dev) +{ + struct fimc_lite *fimc = dev_get_drvdata(dev); + bool suspend = test_bit(ST_FLITE_IN_USE, &fimc->state); + int ret; + + if (test_and_set_bit(ST_LPM, &fimc->state)) + return 0; + + ret = fimc_lite_stop_capture(fimc, suspend); + if (ret < 0 || !fimc_lite_active(fimc)) + return ret; + + return fimc_pipeline_call(fimc, close, &fimc->pipeline); +} +#endif /* CONFIG_PM_SLEEP */ + +static int fimc_lite_remove(struct platform_device *pdev) +{ + struct fimc_lite *fimc = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + fimc_lite_unregister_capture_subdev(fimc); + vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx); + fimc_lite_clk_put(fimc); + + dev_info(dev, "Driver unloaded\n"); + return 0; +} + +static const struct dev_pm_ops fimc_lite_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fimc_lite_suspend, fimc_lite_resume) + SET_RUNTIME_PM_OPS(fimc_lite_runtime_suspend, fimc_lite_runtime_resume, + NULL) +}; + +/* EXYNOS4212, EXYNOS4412 */ +static struct flite_drvdata fimc_lite_drvdata_exynos4 = { + .max_width = 8192, + .max_height = 8192, + .out_width_align = 8, + .win_hor_offs_align = 2, + .out_hor_offs_align = 8, +}; + +static struct platform_device_id fimc_lite_driver_ids[] = { + { + .name = "exynos-fimc-lite", + .driver_data = (unsigned long)&fimc_lite_drvdata_exynos4, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, fimc_lite_driver_ids); + +static const struct of_device_id flite_of_match[] = { + { + .compatible = "samsung,exynos4212-fimc-lite", + .data = &fimc_lite_drvdata_exynos4, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, flite_of_match); + +static struct platform_driver fimc_lite_driver = { + .probe = fimc_lite_probe, + .remove = fimc_lite_remove, + .id_table = fimc_lite_driver_ids, + .driver = { + .of_match_table = flite_of_match, + .name = FIMC_LITE_DRV_NAME, + .owner = THIS_MODULE, + .pm = &fimc_lite_pm_ops, + } +}; +module_platform_driver(fimc_lite_driver); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" FIMC_LITE_DRV_NAME); diff --git a/drivers/media/platform/exynos4-is/fimc-lite.h b/drivers/media/platform/exynos4-is/fimc-lite.h new file mode 100644 index 00000000..47da5e04 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-lite.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef FIMC_LITE_H_ +#define FIMC_LITE_H_ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define FIMC_LITE_DRV_NAME "exynos-fimc-lite" +#define FLITE_CLK_NAME "flite" +#define FIMC_LITE_MAX_DEVS 2 +#define FLITE_REQ_BUFS_MIN 2 + +/* Bit index definitions for struct fimc_lite::state */ +enum { + ST_FLITE_LPM, + ST_FLITE_PENDING, + ST_FLITE_RUN, + ST_FLITE_STREAM, + ST_FLITE_SUSPENDED, + ST_FLITE_OFF, + ST_FLITE_IN_USE, + ST_FLITE_CONFIG, + ST_SENSOR_STREAM, +}; + +#define FLITE_SD_PAD_SINK 0 +#define FLITE_SD_PAD_SOURCE_DMA 1 +#define FLITE_SD_PAD_SOURCE_ISP 2 +#define FLITE_SD_PADS_NUM 3 + +struct flite_drvdata { + unsigned short max_width; + unsigned short max_height; + unsigned short out_width_align; + unsigned short win_hor_offs_align; + unsigned short out_hor_offs_align; +}; + +#define fimc_lite_get_drvdata(_pdev) \ + ((struct flite_drvdata *) platform_get_device_id(_pdev)->driver_data) + +struct fimc_lite_events { + unsigned int data_overflow; +}; + +#define FLITE_MAX_PLANES 1 + +/** + * struct flite_frame - source/target frame properties + * @f_width: full pixel width + * @f_height: full pixel height + * @rect: crop/composition rectangle + * @fmt: pointer to pixel format description data structure + */ +struct flite_frame { + u16 f_width; + u16 f_height; + struct v4l2_rect rect; + const struct fimc_fmt *fmt; +}; + +/** + * struct flite_buffer - video buffer structure + * @vb: vb2 buffer + * @list: list head for the buffers queue + * @paddr: precalculated physical address + */ +struct flite_buffer { + struct vb2_buffer vb; + struct list_head list; + dma_addr_t paddr; +}; + +/** + * struct fimc_lite - fimc lite structure + * @pdev: pointer to FIMC-LITE platform device + * @dd: SoC specific driver data structure + * @v4l2_dev: pointer to top the level v4l2_device + * @vfd: video device node + * @fh: v4l2 file handle + * @alloc_ctx: videobuf2 memory allocator context + * @subdev: FIMC-LITE subdev + * @vd_pad: media (sink) pad for the capture video node + * @subdev_pads: the subdev media pads + * @sensor: sensor subdev attached to FIMC-LITE directly or through MIPI-CSIS + * @ctrl_handler: v4l2 control handler + * @test_pattern: test pattern controls + * @index: FIMC-LITE platform device index + * @pipeline: video capture pipeline data structure + * @pipeline_ops: media pipeline ops for the video node driver + * @slock: spinlock protecting this data structure and the hw registers + * @lock: mutex serializing video device and the subdev operations + * @clock: FIMC-LITE gate clock + * @regs: memory mapped io registers + * @irq_queue: interrupt handler waitqueue + * @payload: image size in bytes (w x h x bpp) + * @inp_frame: camera input frame structure + * @out_frame: DMA output frame structure + * @out_path: output data path (DMA or FIFO) + * @source_subdev_grp_id: source subdev group id + * @state: driver state flags + * @pending_buf_q: pending buffers queue head + * @active_buf_q: the queue head of buffers scheduled in hardware + * @vb_queue: vb2 buffers queue + * @active_buf_count: number of video buffers scheduled in hardware + * @frame_count: the captured frames counter + * @reqbufs_count: the number of buffers requested with REQBUFS ioctl + * @ref_count: driver's private reference counter + */ +struct fimc_lite { + struct platform_device *pdev; + struct flite_drvdata *dd; + struct v4l2_device *v4l2_dev; + struct video_device vfd; + struct v4l2_fh fh; + struct vb2_alloc_ctx *alloc_ctx; + struct v4l2_subdev subdev; + struct media_pad vd_pad; + struct media_pad subdev_pads[FLITE_SD_PADS_NUM]; + struct v4l2_subdev *sensor; + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_ctrl *test_pattern; + int index; + struct fimc_pipeline pipeline; + const struct fimc_pipeline_ops *pipeline_ops; + + struct mutex lock; + spinlock_t slock; + + struct clk *clock; + void __iomem *regs; + wait_queue_head_t irq_queue; + + unsigned long payload[FLITE_MAX_PLANES]; + struct flite_frame inp_frame; + struct flite_frame out_frame; + atomic_t out_path; + unsigned int source_subdev_grp_id; + + unsigned long state; + struct list_head pending_buf_q; + struct list_head active_buf_q; + struct vb2_queue vb_queue; + unsigned int frame_count; + unsigned int reqbufs_count; + int ref_count; + + struct fimc_lite_events events; + bool streaming; +}; + +static inline bool fimc_lite_active(struct fimc_lite *fimc) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&fimc->slock, flags); + ret = fimc->state & (1 << ST_FLITE_RUN) || + fimc->state & (1 << ST_FLITE_PENDING); + spin_unlock_irqrestore(&fimc->slock, flags); + return ret; +} + +static inline void fimc_lite_active_queue_add(struct fimc_lite *dev, + struct flite_buffer *buf) +{ + list_add_tail(&buf->list, &dev->active_buf_q); +} + +static inline struct flite_buffer *fimc_lite_active_queue_pop( + struct fimc_lite *dev) +{ + struct flite_buffer *buf = list_entry(dev->active_buf_q.next, + struct flite_buffer, list); + list_del(&buf->list); + return buf; +} + +static inline void fimc_lite_pending_queue_add(struct fimc_lite *dev, + struct flite_buffer *buf) +{ + list_add_tail(&buf->list, &dev->pending_buf_q); +} + +static inline struct flite_buffer *fimc_lite_pending_queue_pop( + struct fimc_lite *dev) +{ + struct flite_buffer *buf = list_entry(dev->pending_buf_q.next, + struct flite_buffer, list); + list_del(&buf->list); + return buf; +} + +#endif /* FIMC_LITE_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c new file mode 100644 index 00000000..bde1f47f --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-m2m.c @@ -0,0 +1,865 @@ +/* + * Samsung S5P/EXYNOS4 SoC series FIMC (video postprocessor) driver + * + * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fimc-core.h" +#include "fimc-reg.h" +#include "media-dev.h" + +static unsigned int get_m2m_fmt_flags(unsigned int stream_type) +{ + if (stream_type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return FMT_FLAGS_M2M_IN; + else + return FMT_FLAGS_M2M_OUT; +} + +void fimc_m2m_job_finish(struct fimc_ctx *ctx, int vb_state) +{ + struct vb2_buffer *src_vb, *dst_vb; + + if (!ctx || !ctx->m2m_ctx) + return; + + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + + if (src_vb && dst_vb) { + v4l2_m2m_buf_done(src_vb, vb_state); + v4l2_m2m_buf_done(dst_vb, vb_state); + v4l2_m2m_job_finish(ctx->fimc_dev->m2m.m2m_dev, + ctx->m2m_ctx); + } +} + +/* Complete the transaction which has been scheduled for execution. */ +static int fimc_m2m_shutdown(struct fimc_ctx *ctx) +{ + struct fimc_dev *fimc = ctx->fimc_dev; + int ret; + + if (!fimc_m2m_pending(fimc)) + return 0; + + fimc_ctx_state_set(FIMC_CTX_SHUT, ctx); + + ret = wait_event_timeout(fimc->irq_queue, + !fimc_ctx_state_is_set(FIMC_CTX_SHUT, ctx), + FIMC_SHUTDOWN_TIMEOUT); + + return ret == 0 ? -ETIMEDOUT : ret; +} + +static int start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct fimc_ctx *ctx = q->drv_priv; + int ret; + + ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev); + return ret > 0 ? 0 : ret; +} + +static int stop_streaming(struct vb2_queue *q) +{ + struct fimc_ctx *ctx = q->drv_priv; + int ret; + + ret = fimc_m2m_shutdown(ctx); + if (ret == -ETIMEDOUT) + fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); + + pm_runtime_put(&ctx->fimc_dev->pdev->dev); + return 0; +} + +static void fimc_device_run(void *priv) +{ + struct vb2_buffer *src_vb, *dst_vb; + struct fimc_ctx *ctx = priv; + struct fimc_frame *sf, *df; + struct fimc_dev *fimc; + unsigned long flags; + int ret; + + if (WARN(!ctx, "Null context\n")) + return; + + fimc = ctx->fimc_dev; + spin_lock_irqsave(&fimc->slock, flags); + + set_bit(ST_M2M_PEND, &fimc->state); + sf = &ctx->s_frame; + df = &ctx->d_frame; + + if (ctx->state & FIMC_PARAMS) { + /* Prepare the DMA offsets for scaler */ + fimc_prepare_dma_offset(ctx, sf); + fimc_prepare_dma_offset(ctx, df); + } + + src_vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + ret = fimc_prepare_addr(ctx, src_vb, sf, &sf->paddr); + if (ret) + goto dma_unlock; + + dst_vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + ret = fimc_prepare_addr(ctx, dst_vb, df, &df->paddr); + if (ret) + goto dma_unlock; + + dst_vb->v4l2_buf.timestamp = src_vb->v4l2_buf.timestamp; + + /* Reconfigure hardware if the context has changed. */ + if (fimc->m2m.ctx != ctx) { + ctx->state |= FIMC_PARAMS; + fimc->m2m.ctx = ctx; + } + + if (ctx->state & FIMC_PARAMS) { + fimc_set_yuv_order(ctx); + fimc_hw_set_input_path(ctx); + fimc_hw_set_in_dma(ctx); + ret = fimc_set_scaler_info(ctx); + if (ret) + goto dma_unlock; + fimc_hw_set_prescaler(ctx); + fimc_hw_set_mainscaler(ctx); + fimc_hw_set_target_format(ctx); + fimc_hw_set_rotation(ctx); + fimc_hw_set_effect(ctx); + fimc_hw_set_out_dma(ctx); + if (fimc->drv_data->alpha_color) + fimc_hw_set_rgb_alpha(ctx); + fimc_hw_set_output_path(ctx); + } + fimc_hw_set_input_addr(fimc, &sf->paddr); + fimc_hw_set_output_addr(fimc, &df->paddr, -1); + + fimc_activate_capture(ctx); + ctx->state &= (FIMC_CTX_M2M | FIMC_CTX_CAP); + fimc_hw_activate_input_dma(fimc, true); + +dma_unlock: + spin_unlock_irqrestore(&fimc->slock, flags); +} + +static void fimc_job_abort(void *priv) +{ + fimc_m2m_shutdown(priv); +} + +static int fimc_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *allocators[]) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vq); + struct fimc_frame *f; + int i; + + f = ctx_get_frame(ctx, vq->type); + if (IS_ERR(f)) + return PTR_ERR(f); + /* + * Return number of non-contigous planes (plane buffers) + * depending on the configured color format. + */ + if (!f->fmt) + return -EINVAL; + + *num_planes = f->fmt->memplanes; + for (i = 0; i < f->fmt->memplanes; i++) { + sizes[i] = (f->f_width * f->f_height * f->fmt->depth[i]) / 8; + allocators[i] = ctx->fimc_dev->alloc_ctx; + } + return 0; +} + +static int fimc_buf_prepare(struct vb2_buffer *vb) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct fimc_frame *frame; + int i; + + frame = ctx_get_frame(ctx, vb->vb2_queue->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + for (i = 0; i < frame->fmt->memplanes; i++) + vb2_set_plane_payload(vb, i, frame->payload[i]); + + return 0; +} + +static void fimc_buf_queue(struct vb2_buffer *vb) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + + dbg("ctx: %p, ctx->state: 0x%x", ctx, ctx->state); + + if (ctx->m2m_ctx) + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static void fimc_lock(struct vb2_queue *vq) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_lock(&ctx->fimc_dev->lock); +} + +static void fimc_unlock(struct vb2_queue *vq) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_unlock(&ctx->fimc_dev->lock); +} + +static struct vb2_ops fimc_qops = { + .queue_setup = fimc_queue_setup, + .buf_prepare = fimc_buf_prepare, + .buf_queue = fimc_buf_queue, + .wait_prepare = fimc_unlock, + .wait_finish = fimc_lock, + .stop_streaming = stop_streaming, + .start_streaming = start_streaming, +}; + +/* + * V4L2 ioctl handlers + */ +static int fimc_m2m_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct fimc_dev *fimc = video_drvdata(file); + unsigned int caps; + + /* + * This is only a mem-to-mem video device. The capture and output + * device capability flags are left only for backward compatibility + * and are scheduled for removal. + */ + caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_M2M_MPLANE | + V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE; + + __fimc_vidioc_querycap(&fimc->pdev->dev, cap, caps); + return 0; +} + +static int fimc_m2m_enum_fmt_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct fimc_fmt *fmt; + + fmt = fimc_find_format(NULL, NULL, get_m2m_fmt_flags(f->type), + f->index); + if (!fmt) + return -EINVAL; + + strncpy(f->description, fmt->name, sizeof(f->description) - 1); + f->pixelformat = fmt->fourcc; + return 0; +} + +static int fimc_m2m_g_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + struct fimc_frame *frame = ctx_get_frame(ctx, f->type); + + if (IS_ERR(frame)) + return PTR_ERR(frame); + + __fimc_get_format(frame, f); + return 0; +} + +static int fimc_try_fmt_mplane(struct fimc_ctx *ctx, struct v4l2_format *f) +{ + struct fimc_dev *fimc = ctx->fimc_dev; + const struct fimc_variant *variant = fimc->variant; + struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp; + struct fimc_fmt *fmt; + u32 max_w, mod_x, mod_y; + + if (!IS_M2M(f->type)) + return -EINVAL; + + fmt = fimc_find_format(&pix->pixelformat, NULL, + get_m2m_fmt_flags(f->type), 0); + if (WARN(fmt == NULL, "Pixel format lookup failed")) + return -EINVAL; + + if (pix->field == V4L2_FIELD_ANY) + pix->field = V4L2_FIELD_NONE; + else if (pix->field != V4L2_FIELD_NONE) + return -EINVAL; + + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + max_w = variant->pix_limit->scaler_dis_w; + mod_x = ffs(variant->min_inp_pixsize) - 1; + } else { + max_w = variant->pix_limit->out_rot_dis_w; + mod_x = ffs(variant->min_out_pixsize) - 1; + } + + if (tiled_fmt(fmt)) { + mod_x = 6; /* 64 x 32 pixels tile */ + mod_y = 5; + } else { + if (variant->min_vsize_align == 1) + mod_y = fimc_fmt_is_rgb(fmt->color) ? 0 : 1; + else + mod_y = ffs(variant->min_vsize_align) - 1; + } + + v4l_bound_align_image(&pix->width, 16, max_w, mod_x, + &pix->height, 8, variant->pix_limit->scaler_dis_w, mod_y, 0); + + fimc_adjust_mplane_format(fmt, pix->width, pix->height, &f->fmt.pix_mp); + return 0; +} + +static int fimc_m2m_try_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + return fimc_try_fmt_mplane(ctx, f); +} + +static void __set_frame_format(struct fimc_frame *frame, struct fimc_fmt *fmt, + struct v4l2_pix_format_mplane *pixm) +{ + int i; + + for (i = 0; i < fmt->colplanes; i++) { + frame->bytesperline[i] = pixm->plane_fmt[i].bytesperline; + frame->payload[i] = pixm->plane_fmt[i].sizeimage; + } + + frame->f_width = pixm->width; + frame->f_height = pixm->height; + frame->o_width = pixm->width; + frame->o_height = pixm->height; + frame->width = pixm->width; + frame->height = pixm->height; + frame->offs_h = 0; + frame->offs_v = 0; + frame->fmt = fmt; +} + +static int fimc_m2m_s_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + struct fimc_dev *fimc = ctx->fimc_dev; + struct fimc_fmt *fmt; + struct vb2_queue *vq; + struct fimc_frame *frame; + int ret; + + ret = fimc_try_fmt_mplane(ctx, f); + if (ret) + return ret; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + + if (vb2_is_busy(vq)) { + v4l2_err(&fimc->m2m.vfd, "queue (%d) busy\n", f->type); + return -EBUSY; + } + + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + frame = &ctx->s_frame; + else + frame = &ctx->d_frame; + + fmt = fimc_find_format(&f->fmt.pix_mp.pixelformat, NULL, + get_m2m_fmt_flags(f->type), 0); + if (!fmt) + return -EINVAL; + + __set_frame_format(frame, fmt, &f->fmt.pix_mp); + + /* Update RGB Alpha control state and value range */ + fimc_alpha_ctrl_update(ctx); + + return 0; +} + +static int fimc_m2m_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *reqbufs) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int fimc_m2m_querybuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int fimc_m2m_qbuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int fimc_m2m_dqbuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int fimc_m2m_expbuf(struct file *file, void *fh, + struct v4l2_exportbuffer *eb) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_expbuf(file, ctx->m2m_ctx, eb); +} + + +static int fimc_m2m_streamon(struct file *file, void *fh, + enum v4l2_buf_type type) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int fimc_m2m_streamoff(struct file *file, void *fh, + enum v4l2_buf_type type) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static int fimc_m2m_cropcap(struct file *file, void *fh, + struct v4l2_cropcap *cr) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + struct fimc_frame *frame; + + frame = ctx_get_frame(ctx, cr->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + cr->bounds.left = 0; + cr->bounds.top = 0; + cr->bounds.width = frame->o_width; + cr->bounds.height = frame->o_height; + cr->defrect = cr->bounds; + + return 0; +} + +static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + struct fimc_frame *frame; + + frame = ctx_get_frame(ctx, cr->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + cr->c.left = frame->offs_h; + cr->c.top = frame->offs_v; + cr->c.width = frame->width; + cr->c.height = frame->height; + + return 0; +} + +static int fimc_m2m_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) +{ + struct fimc_dev *fimc = ctx->fimc_dev; + struct fimc_frame *f; + u32 min_size, halign, depth = 0; + int i; + + if (cr->c.top < 0 || cr->c.left < 0) { + v4l2_err(&fimc->m2m.vfd, + "doesn't support negative values for top & left\n"); + return -EINVAL; + } + if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + f = &ctx->d_frame; + else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + f = &ctx->s_frame; + else + return -EINVAL; + + min_size = (f == &ctx->s_frame) ? + fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize; + + /* Get pixel alignment constraints. */ + if (fimc->variant->min_vsize_align == 1) + halign = fimc_fmt_is_rgb(f->fmt->color) ? 0 : 1; + else + halign = ffs(fimc->variant->min_vsize_align) - 1; + + for (i = 0; i < f->fmt->colplanes; i++) + depth += f->fmt->depth[i]; + + v4l_bound_align_image(&cr->c.width, min_size, f->o_width, + ffs(min_size) - 1, + &cr->c.height, min_size, f->o_height, + halign, 64/(ALIGN(depth, 8))); + + /* adjust left/top if cropping rectangle is out of bounds */ + if (cr->c.left + cr->c.width > f->o_width) + cr->c.left = f->o_width - cr->c.width; + if (cr->c.top + cr->c.height > f->o_height) + cr->c.top = f->o_height - cr->c.height; + + cr->c.left = round_down(cr->c.left, min_size); + cr->c.top = round_down(cr->c.top, fimc->variant->hor_offs_align); + + dbg("l:%d, t:%d, w:%d, h:%d, f_w: %d, f_h: %d", + cr->c.left, cr->c.top, cr->c.width, cr->c.height, + f->f_width, f->f_height); + + return 0; +} + +static int fimc_m2m_s_crop(struct file *file, void *fh, const struct v4l2_crop *crop) +{ + struct fimc_ctx *ctx = fh_to_ctx(fh); + struct fimc_dev *fimc = ctx->fimc_dev; + struct v4l2_crop cr = *crop; + struct fimc_frame *f; + int ret; + + ret = fimc_m2m_try_crop(ctx, &cr); + if (ret) + return ret; + + f = (cr.type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) ? + &ctx->s_frame : &ctx->d_frame; + + /* Check to see if scaling ratio is within supported range */ + if (cr.type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = fimc_check_scaler_ratio(ctx, cr.c.width, + cr.c.height, ctx->d_frame.width, + ctx->d_frame.height, ctx->rotation); + } else { + ret = fimc_check_scaler_ratio(ctx, ctx->s_frame.width, + ctx->s_frame.height, cr.c.width, + cr.c.height, ctx->rotation); + } + if (ret) { + v4l2_err(&fimc->m2m.vfd, "Out of scaler range\n"); + return -EINVAL; + } + + f->offs_h = cr.c.left; + f->offs_v = cr.c.top; + f->width = cr.c.width; + f->height = cr.c.height; + + fimc_ctx_state_set(FIMC_PARAMS, ctx); + + return 0; +} + +static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = { + .vidioc_querycap = fimc_m2m_querycap, + .vidioc_enum_fmt_vid_cap_mplane = fimc_m2m_enum_fmt_mplane, + .vidioc_enum_fmt_vid_out_mplane = fimc_m2m_enum_fmt_mplane, + .vidioc_g_fmt_vid_cap_mplane = fimc_m2m_g_fmt_mplane, + .vidioc_g_fmt_vid_out_mplane = fimc_m2m_g_fmt_mplane, + .vidioc_try_fmt_vid_cap_mplane = fimc_m2m_try_fmt_mplane, + .vidioc_try_fmt_vid_out_mplane = fimc_m2m_try_fmt_mplane, + .vidioc_s_fmt_vid_cap_mplane = fimc_m2m_s_fmt_mplane, + .vidioc_s_fmt_vid_out_mplane = fimc_m2m_s_fmt_mplane, + .vidioc_reqbufs = fimc_m2m_reqbufs, + .vidioc_querybuf = fimc_m2m_querybuf, + .vidioc_qbuf = fimc_m2m_qbuf, + .vidioc_dqbuf = fimc_m2m_dqbuf, + .vidioc_expbuf = fimc_m2m_expbuf, + .vidioc_streamon = fimc_m2m_streamon, + .vidioc_streamoff = fimc_m2m_streamoff, + .vidioc_g_crop = fimc_m2m_g_crop, + .vidioc_s_crop = fimc_m2m_s_crop, + .vidioc_cropcap = fimc_m2m_cropcap + +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct fimc_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + src_vq->drv_priv = ctx; + src_vq->ops = &fimc_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + dst_vq->drv_priv = ctx; + dst_vq->ops = &fimc_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + return vb2_queue_init(dst_vq); +} + +static int fimc_m2m_set_default_format(struct fimc_ctx *ctx) +{ + struct v4l2_pix_format_mplane pixm = { + .pixelformat = V4L2_PIX_FMT_RGB32, + .width = 800, + .height = 600, + .plane_fmt[0] = { + .bytesperline = 800 * 4, + .sizeimage = 800 * 4 * 600, + }, + }; + struct fimc_fmt *fmt; + + fmt = fimc_find_format(&pixm.pixelformat, NULL, FMT_FLAGS_M2M, 0); + if (!fmt) + return -EINVAL; + + __set_frame_format(&ctx->s_frame, fmt, &pixm); + __set_frame_format(&ctx->d_frame, fmt, &pixm); + + return 0; +} + +static int fimc_m2m_open(struct file *file) +{ + struct fimc_dev *fimc = video_drvdata(file); + struct fimc_ctx *ctx; + int ret = -EBUSY; + + pr_debug("pid: %d, state: %#lx\n", task_pid_nr(current), fimc->state); + + if (mutex_lock_interruptible(&fimc->lock)) + return -ERESTARTSYS; + /* + * Don't allow simultaneous open() of the mem-to-mem and the + * capture video node that belong to same FIMC IP instance. + */ + if (test_bit(ST_CAPT_BUSY, &fimc->state)) + goto unlock; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + ret = -ENOMEM; + goto unlock; + } + v4l2_fh_init(&ctx->fh, &fimc->m2m.vfd); + ctx->fimc_dev = fimc; + + /* Default color format */ + ctx->s_frame.fmt = fimc_get_format(0); + ctx->d_frame.fmt = fimc_get_format(0); + + ret = fimc_ctrls_create(ctx); + if (ret) + goto error_fh; + + /* Use separate control handler per file handle */ + ctx->fh.ctrl_handler = &ctx->ctrls.handler; + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + + /* Setup the device context for memory-to-memory mode */ + ctx->state = FIMC_CTX_M2M; + ctx->flags = 0; + ctx->in_path = FIMC_IO_DMA; + ctx->out_path = FIMC_IO_DMA; + ctx->scaler.enabled = 1; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(fimc->m2m.m2m_dev, ctx, queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + ret = PTR_ERR(ctx->m2m_ctx); + goto error_c; + } + + if (fimc->m2m.refcnt++ == 0) + set_bit(ST_M2M_RUN, &fimc->state); + + ret = fimc_m2m_set_default_format(ctx); + if (ret < 0) + goto error_m2m_ctx; + + mutex_unlock(&fimc->lock); + return 0; + +error_m2m_ctx: + v4l2_m2m_ctx_release(ctx->m2m_ctx); +error_c: + fimc_ctrls_delete(ctx); +error_fh: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); +unlock: + mutex_unlock(&fimc->lock); + return ret; +} + +static int fimc_m2m_release(struct file *file) +{ + struct fimc_ctx *ctx = fh_to_ctx(file->private_data); + struct fimc_dev *fimc = ctx->fimc_dev; + + dbg("pid: %d, state: 0x%lx, refcnt= %d", + task_pid_nr(current), fimc->state, fimc->m2m.refcnt); + + mutex_lock(&fimc->lock); + + v4l2_m2m_ctx_release(ctx->m2m_ctx); + fimc_ctrls_delete(ctx); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + + if (--fimc->m2m.refcnt <= 0) + clear_bit(ST_M2M_RUN, &fimc->state); + kfree(ctx); + + mutex_unlock(&fimc->lock); + return 0; +} + +static unsigned int fimc_m2m_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct fimc_ctx *ctx = fh_to_ctx(file->private_data); + struct fimc_dev *fimc = ctx->fimc_dev; + int ret; + + if (mutex_lock_interruptible(&fimc->lock)) + return -ERESTARTSYS; + + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_unlock(&fimc->lock); + + return ret; +} + + +static int fimc_m2m_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct fimc_ctx *ctx = fh_to_ctx(file->private_data); + struct fimc_dev *fimc = ctx->fimc_dev; + int ret; + + if (mutex_lock_interruptible(&fimc->lock)) + return -ERESTARTSYS; + + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&fimc->lock); + + return ret; +} + +static const struct v4l2_file_operations fimc_m2m_fops = { + .owner = THIS_MODULE, + .open = fimc_m2m_open, + .release = fimc_m2m_release, + .poll = fimc_m2m_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = fimc_m2m_mmap, +}; + +static struct v4l2_m2m_ops m2m_ops = { + .device_run = fimc_device_run, + .job_abort = fimc_job_abort, +}; + +int fimc_register_m2m_device(struct fimc_dev *fimc, + struct v4l2_device *v4l2_dev) +{ + struct video_device *vfd = &fimc->m2m.vfd; + int ret; + + fimc->v4l2_dev = v4l2_dev; + + memset(vfd, 0, sizeof(*vfd)); + vfd->fops = &fimc_m2m_fops; + vfd->ioctl_ops = &fimc_m2m_ioctl_ops; + vfd->v4l2_dev = v4l2_dev; + vfd->minor = -1; + vfd->release = video_device_release_empty; + vfd->lock = &fimc->lock; + vfd->vfl_dir = VFL_DIR_M2M; + + snprintf(vfd->name, sizeof(vfd->name), "fimc.%d.m2m", fimc->id); + video_set_drvdata(vfd, fimc); + + fimc->m2m.m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(fimc->m2m.m2m_dev)) { + v4l2_err(v4l2_dev, "failed to initialize v4l2-m2m device\n"); + return PTR_ERR(fimc->m2m.m2m_dev); + } + + ret = media_entity_init(&vfd->entity, 0, NULL, 0); + if (ret) + goto err_me; + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1); + if (ret) + goto err_vd; + + v4l2_info(v4l2_dev, "Registered %s as /dev/%s\n", + vfd->name, video_device_node_name(vfd)); + return 0; + +err_vd: + media_entity_cleanup(&vfd->entity); +err_me: + v4l2_m2m_release(fimc->m2m.m2m_dev); + return ret; +} + +void fimc_unregister_m2m_device(struct fimc_dev *fimc) +{ + if (!fimc) + return; + + if (fimc->m2m.m2m_dev) + v4l2_m2m_release(fimc->m2m.m2m_dev); + + if (video_is_registered(&fimc->m2m.vfd)) { + video_unregister_device(&fimc->m2m.vfd); + media_entity_cleanup(&fimc->m2m.vfd.entity); + } +} diff --git a/drivers/media/platform/exynos4-is/fimc-reg.c b/drivers/media/platform/exynos4-is/fimc-reg.c new file mode 100644 index 00000000..f079f360 --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-reg.c @@ -0,0 +1,841 @@ +/* + * Register interface file for Samsung Camera Interface (FIMC) driver + * + * Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include +#include "media-dev.h" + +#include "fimc-reg.h" +#include "fimc-core.h" + +void fimc_hw_reset(struct fimc_dev *dev) +{ + u32 cfg; + + cfg = readl(dev->regs + FIMC_REG_CISRCFMT); + cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT; + writel(cfg, dev->regs + FIMC_REG_CISRCFMT); + + /* Software reset. */ + cfg = readl(dev->regs + FIMC_REG_CIGCTRL); + cfg |= (FIMC_REG_CIGCTRL_SWRST | FIMC_REG_CIGCTRL_IRQ_LEVEL); + writel(cfg, dev->regs + FIMC_REG_CIGCTRL); + udelay(10); + + cfg = readl(dev->regs + FIMC_REG_CIGCTRL); + cfg &= ~FIMC_REG_CIGCTRL_SWRST; + writel(cfg, dev->regs + FIMC_REG_CIGCTRL); + + if (dev->drv_data->out_buf_count > 4) + fimc_hw_set_dma_seq(dev, 0xF); +} + +static u32 fimc_hw_get_in_flip(struct fimc_ctx *ctx) +{ + u32 flip = FIMC_REG_MSCTRL_FLIP_NORMAL; + + if (ctx->hflip) + flip = FIMC_REG_MSCTRL_FLIP_Y_MIRROR; + if (ctx->vflip) + flip = FIMC_REG_MSCTRL_FLIP_X_MIRROR; + + if (ctx->rotation <= 90) + return flip; + + return (flip ^ FIMC_REG_MSCTRL_FLIP_180) & FIMC_REG_MSCTRL_FLIP_180; +} + +static u32 fimc_hw_get_target_flip(struct fimc_ctx *ctx) +{ + u32 flip = FIMC_REG_CITRGFMT_FLIP_NORMAL; + + if (ctx->hflip) + flip |= FIMC_REG_CITRGFMT_FLIP_Y_MIRROR; + if (ctx->vflip) + flip |= FIMC_REG_CITRGFMT_FLIP_X_MIRROR; + + if (ctx->rotation <= 90) + return flip; + + return (flip ^ FIMC_REG_CITRGFMT_FLIP_180) & FIMC_REG_CITRGFMT_FLIP_180; +} + +void fimc_hw_set_rotation(struct fimc_ctx *ctx) +{ + u32 cfg, flip; + struct fimc_dev *dev = ctx->fimc_dev; + + cfg = readl(dev->regs + FIMC_REG_CITRGFMT); + cfg &= ~(FIMC_REG_CITRGFMT_INROT90 | FIMC_REG_CITRGFMT_OUTROT90 | + FIMC_REG_CITRGFMT_FLIP_180); + + /* + * The input and output rotator cannot work simultaneously. + * Use the output rotator in output DMA mode or the input rotator + * in direct fifo output mode. + */ + if (ctx->rotation == 90 || ctx->rotation == 270) { + if (ctx->out_path == FIMC_IO_LCDFIFO) + cfg |= FIMC_REG_CITRGFMT_INROT90; + else + cfg |= FIMC_REG_CITRGFMT_OUTROT90; + } + + if (ctx->out_path == FIMC_IO_DMA) { + cfg |= fimc_hw_get_target_flip(ctx); + writel(cfg, dev->regs + FIMC_REG_CITRGFMT); + } else { + /* LCD FIFO path */ + flip = readl(dev->regs + FIMC_REG_MSCTRL); + flip &= ~FIMC_REG_MSCTRL_FLIP_MASK; + flip |= fimc_hw_get_in_flip(ctx); + writel(flip, dev->regs + FIMC_REG_MSCTRL); + } +} + +void fimc_hw_set_target_format(struct fimc_ctx *ctx) +{ + u32 cfg; + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_frame *frame = &ctx->d_frame; + + dbg("w= %d, h= %d color: %d", frame->width, + frame->height, frame->fmt->color); + + cfg = readl(dev->regs + FIMC_REG_CITRGFMT); + cfg &= ~(FIMC_REG_CITRGFMT_FMT_MASK | FIMC_REG_CITRGFMT_HSIZE_MASK | + FIMC_REG_CITRGFMT_VSIZE_MASK); + + switch (frame->fmt->color) { + case FIMC_FMT_RGB444...FIMC_FMT_RGB888: + cfg |= FIMC_REG_CITRGFMT_RGB; + break; + case FIMC_FMT_YCBCR420: + cfg |= FIMC_REG_CITRGFMT_YCBCR420; + break; + case FIMC_FMT_YCBYCR422...FIMC_FMT_CRYCBY422: + if (frame->fmt->colplanes == 1) + cfg |= FIMC_REG_CITRGFMT_YCBCR422_1P; + else + cfg |= FIMC_REG_CITRGFMT_YCBCR422; + break; + default: + break; + } + + if (ctx->rotation == 90 || ctx->rotation == 270) + cfg |= (frame->height << 16) | frame->width; + else + cfg |= (frame->width << 16) | frame->height; + + writel(cfg, dev->regs + FIMC_REG_CITRGFMT); + + cfg = readl(dev->regs + FIMC_REG_CITAREA); + cfg &= ~FIMC_REG_CITAREA_MASK; + cfg |= (frame->width * frame->height); + writel(cfg, dev->regs + FIMC_REG_CITAREA); +} + +static void fimc_hw_set_out_dma_size(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_frame *frame = &ctx->d_frame; + u32 cfg; + + cfg = (frame->f_height << 16) | frame->f_width; + writel(cfg, dev->regs + FIMC_REG_ORGOSIZE); + + /* Select color space conversion equation (HD/SD size).*/ + cfg = readl(dev->regs + FIMC_REG_CIGCTRL); + if (frame->f_width >= 1280) /* HD */ + cfg |= FIMC_REG_CIGCTRL_CSC_ITU601_709; + else /* SD */ + cfg &= ~FIMC_REG_CIGCTRL_CSC_ITU601_709; + writel(cfg, dev->regs + FIMC_REG_CIGCTRL); + +} + +void fimc_hw_set_out_dma(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_frame *frame = &ctx->d_frame; + struct fimc_dma_offset *offset = &frame->dma_offset; + struct fimc_fmt *fmt = frame->fmt; + u32 cfg; + + /* Set the input dma offsets. */ + cfg = (offset->y_v << 16) | offset->y_h; + writel(cfg, dev->regs + FIMC_REG_CIOYOFF); + + cfg = (offset->cb_v << 16) | offset->cb_h; + writel(cfg, dev->regs + FIMC_REG_CIOCBOFF); + + cfg = (offset->cr_v << 16) | offset->cr_h; + writel(cfg, dev->regs + FIMC_REG_CIOCROFF); + + fimc_hw_set_out_dma_size(ctx); + + /* Configure chroma components order. */ + cfg = readl(dev->regs + FIMC_REG_CIOCTRL); + + cfg &= ~(FIMC_REG_CIOCTRL_ORDER2P_MASK | + FIMC_REG_CIOCTRL_ORDER422_MASK | + FIMC_REG_CIOCTRL_YCBCR_PLANE_MASK | + FIMC_REG_CIOCTRL_RGB16FMT_MASK); + + if (fmt->colplanes == 1) + cfg |= ctx->out_order_1p; + else if (fmt->colplanes == 2) + cfg |= ctx->out_order_2p | FIMC_REG_CIOCTRL_YCBCR_2PLANE; + else if (fmt->colplanes == 3) + cfg |= FIMC_REG_CIOCTRL_YCBCR_3PLANE; + + if (fmt->color == FIMC_FMT_RGB565) + cfg |= FIMC_REG_CIOCTRL_RGB565; + else if (fmt->color == FIMC_FMT_RGB555) + cfg |= FIMC_REG_CIOCTRL_ARGB1555; + else if (fmt->color == FIMC_FMT_RGB444) + cfg |= FIMC_REG_CIOCTRL_ARGB4444; + + writel(cfg, dev->regs + FIMC_REG_CIOCTRL); +} + +static void fimc_hw_en_autoload(struct fimc_dev *dev, int enable) +{ + u32 cfg = readl(dev->regs + FIMC_REG_ORGISIZE); + if (enable) + cfg |= FIMC_REG_CIREAL_ISIZE_AUTOLOAD_EN; + else + cfg &= ~FIMC_REG_CIREAL_ISIZE_AUTOLOAD_EN; + writel(cfg, dev->regs + FIMC_REG_ORGISIZE); +} + +void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable) +{ + u32 cfg = readl(dev->regs + FIMC_REG_CIOCTRL); + if (enable) + cfg |= FIMC_REG_CIOCTRL_LASTIRQ_ENABLE; + else + cfg &= ~FIMC_REG_CIOCTRL_LASTIRQ_ENABLE; + writel(cfg, dev->regs + FIMC_REG_CIOCTRL); +} + +void fimc_hw_set_prescaler(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_scaler *sc = &ctx->scaler; + u32 cfg, shfactor; + + shfactor = 10 - (sc->hfactor + sc->vfactor); + cfg = shfactor << 28; + + cfg |= (sc->pre_hratio << 16) | sc->pre_vratio; + writel(cfg, dev->regs + FIMC_REG_CISCPRERATIO); + + cfg = (sc->pre_dst_width << 16) | sc->pre_dst_height; + writel(cfg, dev->regs + FIMC_REG_CISCPREDST); +} + +static void fimc_hw_set_scaler(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_scaler *sc = &ctx->scaler; + struct fimc_frame *src_frame = &ctx->s_frame; + struct fimc_frame *dst_frame = &ctx->d_frame; + + u32 cfg = readl(dev->regs + FIMC_REG_CISCCTRL); + + cfg &= ~(FIMC_REG_CISCCTRL_CSCR2Y_WIDE | FIMC_REG_CISCCTRL_CSCY2R_WIDE | + FIMC_REG_CISCCTRL_SCALEUP_H | FIMC_REG_CISCCTRL_SCALEUP_V | + FIMC_REG_CISCCTRL_SCALERBYPASS | FIMC_REG_CISCCTRL_ONE2ONE | + FIMC_REG_CISCCTRL_INRGB_FMT_MASK | FIMC_REG_CISCCTRL_OUTRGB_FMT_MASK | + FIMC_REG_CISCCTRL_INTERLACE | FIMC_REG_CISCCTRL_RGB_EXT); + + if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW)) + cfg |= (FIMC_REG_CISCCTRL_CSCR2Y_WIDE | + FIMC_REG_CISCCTRL_CSCY2R_WIDE); + + if (!sc->enabled) + cfg |= FIMC_REG_CISCCTRL_SCALERBYPASS; + + if (sc->scaleup_h) + cfg |= FIMC_REG_CISCCTRL_SCALEUP_H; + + if (sc->scaleup_v) + cfg |= FIMC_REG_CISCCTRL_SCALEUP_V; + + if (sc->copy_mode) + cfg |= FIMC_REG_CISCCTRL_ONE2ONE; + + if (ctx->in_path == FIMC_IO_DMA) { + switch (src_frame->fmt->color) { + case FIMC_FMT_RGB565: + cfg |= FIMC_REG_CISCCTRL_INRGB_FMT_RGB565; + break; + case FIMC_FMT_RGB666: + cfg |= FIMC_REG_CISCCTRL_INRGB_FMT_RGB666; + break; + case FIMC_FMT_RGB888: + cfg |= FIMC_REG_CISCCTRL_INRGB_FMT_RGB888; + break; + } + } + + if (ctx->out_path == FIMC_IO_DMA) { + u32 color = dst_frame->fmt->color; + + if (color >= FIMC_FMT_RGB444 && color <= FIMC_FMT_RGB565) + cfg |= FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB565; + else if (color == FIMC_FMT_RGB666) + cfg |= FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB666; + else if (color == FIMC_FMT_RGB888) + cfg |= FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB888; + } else { + cfg |= FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB888; + + if (ctx->flags & FIMC_SCAN_MODE_INTERLACED) + cfg |= FIMC_REG_CISCCTRL_INTERLACE; + } + + writel(cfg, dev->regs + FIMC_REG_CISCCTRL); +} + +void fimc_hw_set_mainscaler(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + const struct fimc_variant *variant = dev->variant; + struct fimc_scaler *sc = &ctx->scaler; + u32 cfg; + + dbg("main_hratio= 0x%X main_vratio= 0x%X", + sc->main_hratio, sc->main_vratio); + + fimc_hw_set_scaler(ctx); + + cfg = readl(dev->regs + FIMC_REG_CISCCTRL); + cfg &= ~(FIMC_REG_CISCCTRL_MHRATIO_MASK | + FIMC_REG_CISCCTRL_MVRATIO_MASK); + + if (variant->has_mainscaler_ext) { + cfg |= FIMC_REG_CISCCTRL_MHRATIO_EXT(sc->main_hratio); + cfg |= FIMC_REG_CISCCTRL_MVRATIO_EXT(sc->main_vratio); + writel(cfg, dev->regs + FIMC_REG_CISCCTRL); + + cfg = readl(dev->regs + FIMC_REG_CIEXTEN); + + cfg &= ~(FIMC_REG_CIEXTEN_MVRATIO_EXT_MASK | + FIMC_REG_CIEXTEN_MHRATIO_EXT_MASK); + cfg |= FIMC_REG_CIEXTEN_MHRATIO_EXT(sc->main_hratio); + cfg |= FIMC_REG_CIEXTEN_MVRATIO_EXT(sc->main_vratio); + writel(cfg, dev->regs + FIMC_REG_CIEXTEN); + } else { + cfg |= FIMC_REG_CISCCTRL_MHRATIO(sc->main_hratio); + cfg |= FIMC_REG_CISCCTRL_MVRATIO(sc->main_vratio); + writel(cfg, dev->regs + FIMC_REG_CISCCTRL); + } +} + +void fimc_hw_enable_capture(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + u32 cfg; + + cfg = readl(dev->regs + FIMC_REG_CIIMGCPT); + cfg |= FIMC_REG_CIIMGCPT_CPT_FREN_ENABLE; + + if (ctx->scaler.enabled) + cfg |= FIMC_REG_CIIMGCPT_IMGCPTEN_SC; + else + cfg &= FIMC_REG_CIIMGCPT_IMGCPTEN_SC; + + cfg |= FIMC_REG_CIIMGCPT_IMGCPTEN; + writel(cfg, dev->regs + FIMC_REG_CIIMGCPT); +} + +void fimc_hw_disable_capture(struct fimc_dev *dev) +{ + u32 cfg = readl(dev->regs + FIMC_REG_CIIMGCPT); + cfg &= ~(FIMC_REG_CIIMGCPT_IMGCPTEN | + FIMC_REG_CIIMGCPT_IMGCPTEN_SC); + writel(cfg, dev->regs + FIMC_REG_CIIMGCPT); +} + +void fimc_hw_set_effect(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_effect *effect = &ctx->effect; + u32 cfg = 0; + + if (effect->type != FIMC_REG_CIIMGEFF_FIN_BYPASS) { + cfg |= FIMC_REG_CIIMGEFF_IE_SC_AFTER | + FIMC_REG_CIIMGEFF_IE_ENABLE; + cfg |= effect->type; + if (effect->type == FIMC_REG_CIIMGEFF_FIN_ARBITRARY) + cfg |= (effect->pat_cb << 13) | effect->pat_cr; + } + + writel(cfg, dev->regs + FIMC_REG_CIIMGEFF); +} + +void fimc_hw_set_rgb_alpha(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_frame *frame = &ctx->d_frame; + u32 cfg; + + if (!(frame->fmt->flags & FMT_HAS_ALPHA)) + return; + + cfg = readl(dev->regs + FIMC_REG_CIOCTRL); + cfg &= ~FIMC_REG_CIOCTRL_ALPHA_OUT_MASK; + cfg |= (frame->alpha << 4); + writel(cfg, dev->regs + FIMC_REG_CIOCTRL); +} + +static void fimc_hw_set_in_dma_size(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_frame *frame = &ctx->s_frame; + u32 cfg_o = 0; + u32 cfg_r = 0; + + if (FIMC_IO_LCDFIFO == ctx->out_path) + cfg_r |= FIMC_REG_CIREAL_ISIZE_AUTOLOAD_EN; + + cfg_o |= (frame->f_height << 16) | frame->f_width; + cfg_r |= (frame->height << 16) | frame->width; + + writel(cfg_o, dev->regs + FIMC_REG_ORGISIZE); + writel(cfg_r, dev->regs + FIMC_REG_CIREAL_ISIZE); +} + +void fimc_hw_set_in_dma(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct fimc_frame *frame = &ctx->s_frame; + struct fimc_dma_offset *offset = &frame->dma_offset; + u32 cfg; + + /* Set the pixel offsets. */ + cfg = (offset->y_v << 16) | offset->y_h; + writel(cfg, dev->regs + FIMC_REG_CIIYOFF); + + cfg = (offset->cb_v << 16) | offset->cb_h; + writel(cfg, dev->regs + FIMC_REG_CIICBOFF); + + cfg = (offset->cr_v << 16) | offset->cr_h; + writel(cfg, dev->regs + FIMC_REG_CIICROFF); + + /* Input original and real size. */ + fimc_hw_set_in_dma_size(ctx); + + /* Use DMA autoload only in FIFO mode. */ + fimc_hw_en_autoload(dev, ctx->out_path == FIMC_IO_LCDFIFO); + + /* Set the input DMA to process single frame only. */ + cfg = readl(dev->regs + FIMC_REG_MSCTRL); + cfg &= ~(FIMC_REG_MSCTRL_INFORMAT_MASK + | FIMC_REG_MSCTRL_IN_BURST_COUNT_MASK + | FIMC_REG_MSCTRL_INPUT_MASK + | FIMC_REG_MSCTRL_C_INT_IN_MASK + | FIMC_REG_MSCTRL_2P_IN_ORDER_MASK + | FIMC_REG_MSCTRL_ORDER422_MASK); + + cfg |= (FIMC_REG_MSCTRL_IN_BURST_COUNT(4) + | FIMC_REG_MSCTRL_INPUT_MEMORY + | FIMC_REG_MSCTRL_FIFO_CTRL_FULL); + + switch (frame->fmt->color) { + case FIMC_FMT_RGB565...FIMC_FMT_RGB888: + cfg |= FIMC_REG_MSCTRL_INFORMAT_RGB; + break; + case FIMC_FMT_YCBCR420: + cfg |= FIMC_REG_MSCTRL_INFORMAT_YCBCR420; + + if (frame->fmt->colplanes == 2) + cfg |= ctx->in_order_2p | FIMC_REG_MSCTRL_C_INT_IN_2PLANE; + else + cfg |= FIMC_REG_MSCTRL_C_INT_IN_3PLANE; + + break; + case FIMC_FMT_YCBYCR422...FIMC_FMT_CRYCBY422: + if (frame->fmt->colplanes == 1) { + cfg |= ctx->in_order_1p + | FIMC_REG_MSCTRL_INFORMAT_YCBCR422_1P; + } else { + cfg |= FIMC_REG_MSCTRL_INFORMAT_YCBCR422; + + if (frame->fmt->colplanes == 2) + cfg |= ctx->in_order_2p + | FIMC_REG_MSCTRL_C_INT_IN_2PLANE; + else + cfg |= FIMC_REG_MSCTRL_C_INT_IN_3PLANE; + } + break; + default: + break; + } + + writel(cfg, dev->regs + FIMC_REG_MSCTRL); + + /* Input/output DMA linear/tiled mode. */ + cfg = readl(dev->regs + FIMC_REG_CIDMAPARAM); + cfg &= ~FIMC_REG_CIDMAPARAM_TILE_MASK; + + if (tiled_fmt(ctx->s_frame.fmt)) + cfg |= FIMC_REG_CIDMAPARAM_R_64X32; + + if (tiled_fmt(ctx->d_frame.fmt)) + cfg |= FIMC_REG_CIDMAPARAM_W_64X32; + + writel(cfg, dev->regs + FIMC_REG_CIDMAPARAM); +} + + +void fimc_hw_set_input_path(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + + u32 cfg = readl(dev->regs + FIMC_REG_MSCTRL); + cfg &= ~FIMC_REG_MSCTRL_INPUT_MASK; + + if (ctx->in_path == FIMC_IO_DMA) + cfg |= FIMC_REG_MSCTRL_INPUT_MEMORY; + else + cfg |= FIMC_REG_MSCTRL_INPUT_EXTCAM; + + writel(cfg, dev->regs + FIMC_REG_MSCTRL); +} + +void fimc_hw_set_output_path(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + + u32 cfg = readl(dev->regs + FIMC_REG_CISCCTRL); + cfg &= ~FIMC_REG_CISCCTRL_LCDPATHEN_FIFO; + if (ctx->out_path == FIMC_IO_LCDFIFO) + cfg |= FIMC_REG_CISCCTRL_LCDPATHEN_FIFO; + writel(cfg, dev->regs + FIMC_REG_CISCCTRL); +} + +void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr) +{ + u32 cfg = readl(dev->regs + FIMC_REG_CIREAL_ISIZE); + cfg |= FIMC_REG_CIREAL_ISIZE_ADDR_CH_DIS; + writel(cfg, dev->regs + FIMC_REG_CIREAL_ISIZE); + + writel(paddr->y, dev->regs + FIMC_REG_CIIYSA(0)); + writel(paddr->cb, dev->regs + FIMC_REG_CIICBSA(0)); + writel(paddr->cr, dev->regs + FIMC_REG_CIICRSA(0)); + + cfg &= ~FIMC_REG_CIREAL_ISIZE_ADDR_CH_DIS; + writel(cfg, dev->regs + FIMC_REG_CIREAL_ISIZE); +} + +void fimc_hw_set_output_addr(struct fimc_dev *dev, + struct fimc_addr *paddr, int index) +{ + int i = (index == -1) ? 0 : index; + do { + writel(paddr->y, dev->regs + FIMC_REG_CIOYSA(i)); + writel(paddr->cb, dev->regs + FIMC_REG_CIOCBSA(i)); + writel(paddr->cr, dev->regs + FIMC_REG_CIOCRSA(i)); + dbg("dst_buf[%d]: 0x%X, cb: 0x%X, cr: 0x%X", + i, paddr->y, paddr->cb, paddr->cr); + } while (index == -1 && ++i < FIMC_MAX_OUT_BUFS); +} + +int fimc_hw_set_camera_polarity(struct fimc_dev *fimc, + struct fimc_source_info *cam) +{ + u32 cfg = readl(fimc->regs + FIMC_REG_CIGCTRL); + + cfg &= ~(FIMC_REG_CIGCTRL_INVPOLPCLK | FIMC_REG_CIGCTRL_INVPOLVSYNC | + FIMC_REG_CIGCTRL_INVPOLHREF | FIMC_REG_CIGCTRL_INVPOLHSYNC | + FIMC_REG_CIGCTRL_INVPOLFIELD); + + if (cam->flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) + cfg |= FIMC_REG_CIGCTRL_INVPOLPCLK; + + if (cam->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + cfg |= FIMC_REG_CIGCTRL_INVPOLVSYNC; + + if (cam->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + cfg |= FIMC_REG_CIGCTRL_INVPOLHREF; + + if (cam->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + cfg |= FIMC_REG_CIGCTRL_INVPOLHSYNC; + + if (cam->flags & V4L2_MBUS_FIELD_EVEN_LOW) + cfg |= FIMC_REG_CIGCTRL_INVPOLFIELD; + + writel(cfg, fimc->regs + FIMC_REG_CIGCTRL); + + return 0; +} + +struct mbus_pixfmt_desc { + u32 pixelcode; + u32 cisrcfmt; + u16 bus_width; +}; + +static const struct mbus_pixfmt_desc pix_desc[] = { + { V4L2_MBUS_FMT_YUYV8_2X8, FIMC_REG_CISRCFMT_ORDER422_YCBYCR, 8 }, + { V4L2_MBUS_FMT_YVYU8_2X8, FIMC_REG_CISRCFMT_ORDER422_YCRYCB, 8 }, + { V4L2_MBUS_FMT_VYUY8_2X8, FIMC_REG_CISRCFMT_ORDER422_CRYCBY, 8 }, + { V4L2_MBUS_FMT_UYVY8_2X8, FIMC_REG_CISRCFMT_ORDER422_CBYCRY, 8 }, +}; + +int fimc_hw_set_camera_source(struct fimc_dev *fimc, + struct fimc_source_info *source) +{ + struct fimc_vid_cap *vc = &fimc->vid_cap; + struct fimc_frame *f = &vc->ctx->s_frame; + u32 bus_width, cfg = 0; + int i; + + switch (source->fimc_bus_type) { + case FIMC_BUS_TYPE_ITU_601: + case FIMC_BUS_TYPE_ITU_656: + for (i = 0; i < ARRAY_SIZE(pix_desc); i++) { + if (vc->ci_fmt.code == pix_desc[i].pixelcode) { + cfg = pix_desc[i].cisrcfmt; + bus_width = pix_desc[i].bus_width; + break; + } + } + + if (i == ARRAY_SIZE(pix_desc)) { + v4l2_err(&vc->vfd, + "Camera color format not supported: %d\n", + vc->ci_fmt.code); + return -EINVAL; + } + + if (source->fimc_bus_type == FIMC_BUS_TYPE_ITU_601) { + if (bus_width == 8) + cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT; + else if (bus_width == 16) + cfg |= FIMC_REG_CISRCFMT_ITU601_16BIT; + } /* else defaults to ITU-R BT.656 8-bit */ + break; + case FIMC_BUS_TYPE_MIPI_CSI2: + if (fimc_fmt_is_user_defined(f->fmt->color)) + cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT; + break; + default: + case FIMC_BUS_TYPE_ISP_WRITEBACK: + /* Anything to do here ? */ + break; + } + + cfg |= (f->o_width << 16) | f->o_height; + writel(cfg, fimc->regs + FIMC_REG_CISRCFMT); + return 0; +} + +void fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f) +{ + u32 hoff2, voff2; + + u32 cfg = readl(fimc->regs + FIMC_REG_CIWDOFST); + + cfg &= ~(FIMC_REG_CIWDOFST_HOROFF_MASK | FIMC_REG_CIWDOFST_VEROFF_MASK); + cfg |= FIMC_REG_CIWDOFST_OFF_EN | + (f->offs_h << 16) | f->offs_v; + + writel(cfg, fimc->regs + FIMC_REG_CIWDOFST); + + /* See CIWDOFSTn register description in the datasheet for details. */ + hoff2 = f->o_width - f->width - f->offs_h; + voff2 = f->o_height - f->height - f->offs_v; + cfg = (hoff2 << 16) | voff2; + writel(cfg, fimc->regs + FIMC_REG_CIWDOFST2); +} + +int fimc_hw_set_camera_type(struct fimc_dev *fimc, + struct fimc_source_info *source) +{ + struct fimc_vid_cap *vid_cap = &fimc->vid_cap; + u32 csis_data_alignment = 32; + u32 cfg, tmp; + + cfg = readl(fimc->regs + FIMC_REG_CIGCTRL); + + /* Select ITU B interface, disable Writeback path and test pattern. */ + cfg &= ~(FIMC_REG_CIGCTRL_TESTPAT_MASK | FIMC_REG_CIGCTRL_SELCAM_ITU_A | + FIMC_REG_CIGCTRL_SELCAM_MIPI | FIMC_REG_CIGCTRL_CAMIF_SELWB | + FIMC_REG_CIGCTRL_SELCAM_MIPI_A | FIMC_REG_CIGCTRL_CAM_JPEG | + FIMC_REG_CIGCTRL_SELWB_A); + + switch (source->fimc_bus_type) { + case FIMC_BUS_TYPE_MIPI_CSI2: + cfg |= FIMC_REG_CIGCTRL_SELCAM_MIPI; + + if (source->mux_id == 0) + cfg |= FIMC_REG_CIGCTRL_SELCAM_MIPI_A; + + /* TODO: add remaining supported formats. */ + switch (vid_cap->ci_fmt.code) { + case V4L2_MBUS_FMT_VYUY8_2X8: + tmp = FIMC_REG_CSIIMGFMT_YCBCR422_8BIT; + break; + case V4L2_MBUS_FMT_JPEG_1X8: + case V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8: + tmp = FIMC_REG_CSIIMGFMT_USER(1); + cfg |= FIMC_REG_CIGCTRL_CAM_JPEG; + break; + default: + v4l2_err(&vid_cap->vfd, + "Not supported camera pixel format: %#x\n", + vid_cap->ci_fmt.code); + return -EINVAL; + } + tmp |= (csis_data_alignment == 32) << 8; + + writel(tmp, fimc->regs + FIMC_REG_CSIIMGFMT); + break; + case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656: + if (source->mux_id == 0) /* ITU-A, ITU-B: 0, 1 */ + cfg |= FIMC_REG_CIGCTRL_SELCAM_ITU_A; + break; + case FIMC_BUS_TYPE_LCD_WRITEBACK_A: + cfg |= FIMC_REG_CIGCTRL_CAMIF_SELWB; + /* fall through */ + case FIMC_BUS_TYPE_ISP_WRITEBACK: + if (fimc->variant->has_isp_wb) + cfg |= FIMC_REG_CIGCTRL_CAMIF_SELWB; + else + WARN_ONCE(1, "ISP Writeback input is not supported\n"); + break; + default: + v4l2_err(&vid_cap->vfd, "Invalid FIMC bus type selected: %d\n", + source->fimc_bus_type); + return -EINVAL; + } + writel(cfg, fimc->regs + FIMC_REG_CIGCTRL); + + return 0; +} + +void fimc_hw_clear_irq(struct fimc_dev *dev) +{ + u32 cfg = readl(dev->regs + FIMC_REG_CIGCTRL); + cfg |= FIMC_REG_CIGCTRL_IRQ_CLR; + writel(cfg, dev->regs + FIMC_REG_CIGCTRL); +} + +void fimc_hw_enable_scaler(struct fimc_dev *dev, bool on) +{ + u32 cfg = readl(dev->regs + FIMC_REG_CISCCTRL); + if (on) + cfg |= FIMC_REG_CISCCTRL_SCALERSTART; + else + cfg &= ~FIMC_REG_CISCCTRL_SCALERSTART; + writel(cfg, dev->regs + FIMC_REG_CISCCTRL); +} + +void fimc_hw_activate_input_dma(struct fimc_dev *dev, bool on) +{ + u32 cfg = readl(dev->regs + FIMC_REG_MSCTRL); + if (on) + cfg |= FIMC_REG_MSCTRL_ENVID; + else + cfg &= ~FIMC_REG_MSCTRL_ENVID; + writel(cfg, dev->regs + FIMC_REG_MSCTRL); +} + +/* Return an index to the buffer actually being written. */ +s32 fimc_hw_get_frame_index(struct fimc_dev *dev) +{ + s32 reg; + + if (dev->drv_data->cistatus2) { + reg = readl(dev->regs + FIMC_REG_CISTATUS2) & 0x3f; + return reg - 1; + } + + reg = readl(dev->regs + FIMC_REG_CISTATUS); + + return (reg & FIMC_REG_CISTATUS_FRAMECNT_MASK) >> + FIMC_REG_CISTATUS_FRAMECNT_SHIFT; +} + +/* Return an index to the buffer being written previously. */ +s32 fimc_hw_get_prev_frame_index(struct fimc_dev *dev) +{ + s32 reg; + + if (!dev->drv_data->cistatus2) + return -1; + + reg = readl(dev->regs + FIMC_REG_CISTATUS2); + return ((reg >> 7) & 0x3f) - 1; +} + +/* Locking: the caller holds fimc->slock */ +void fimc_activate_capture(struct fimc_ctx *ctx) +{ + fimc_hw_enable_scaler(ctx->fimc_dev, ctx->scaler.enabled); + fimc_hw_enable_capture(ctx); +} + +void fimc_deactivate_capture(struct fimc_dev *fimc) +{ + fimc_hw_en_lastirq(fimc, true); + fimc_hw_disable_capture(fimc); + fimc_hw_enable_scaler(fimc, false); + fimc_hw_en_lastirq(fimc, false); +} + +int fimc_hw_camblk_cfg_writeback(struct fimc_dev *fimc) +{ + struct regmap *map = fimc->sysreg; + unsigned int mask, val, camblk_cfg; + int ret; + + if (map == NULL) + return 0; + + ret = regmap_read(map, SYSREG_CAMBLK, &camblk_cfg); + if (ret < 0 || ((camblk_cfg & 0x00700000) >> 20 != 0x3)) + return ret; + + if (!WARN(fimc->id >= 3, "not supported id: %d\n", fimc->id)) + val = 0x1 << (fimc->id + 20); + else + val = 0; + + mask = SYSREG_CAMBLK_FIFORST_ISP | SYSREG_CAMBLK_ISPWB_FULL_EN; + ret = regmap_update_bits(map, SYSREG_CAMBLK, mask, val); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + + val |= SYSREG_CAMBLK_FIFORST_ISP; + ret = regmap_update_bits(map, SYSREG_CAMBLK, mask, val); + if (ret < 0) + return ret; + + mask = SYSREG_ISPBLK_FIFORST_CAM_BLK; + ret = regmap_update_bits(map, SYSREG_ISPBLK, mask, ~mask); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + + return regmap_update_bits(map, SYSREG_ISPBLK, mask, mask); +} diff --git a/drivers/media/platform/exynos4-is/fimc-reg.h b/drivers/media/platform/exynos4-is/fimc-reg.h new file mode 100644 index 00000000..6c97798c --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-reg.h @@ -0,0 +1,338 @@ +/* + * Samsung camera host interface (FIMC) registers definition + * + * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef FIMC_REG_H_ +#define FIMC_REG_H_ + +#include "fimc-core.h" + +/* Input source format */ +#define FIMC_REG_CISRCFMT 0x00 +#define FIMC_REG_CISRCFMT_ITU601_8BIT (1 << 31) +#define FIMC_REG_CISRCFMT_ITU601_16BIT (1 << 29) +#define FIMC_REG_CISRCFMT_ORDER422_YCBYCR (0 << 14) +#define FIMC_REG_CISRCFMT_ORDER422_YCRYCB (1 << 14) +#define FIMC_REG_CISRCFMT_ORDER422_CBYCRY (2 << 14) +#define FIMC_REG_CISRCFMT_ORDER422_CRYCBY (3 << 14) + +/* Window offset */ +#define FIMC_REG_CIWDOFST 0x04 +#define FIMC_REG_CIWDOFST_OFF_EN (1 << 31) +#define FIMC_REG_CIWDOFST_CLROVFIY (1 << 30) +#define FIMC_REG_CIWDOFST_CLROVRLB (1 << 29) +#define FIMC_REG_CIWDOFST_HOROFF_MASK (0x7ff << 16) +#define FIMC_REG_CIWDOFST_CLROVFICB (1 << 15) +#define FIMC_REG_CIWDOFST_CLROVFICR (1 << 14) +#define FIMC_REG_CIWDOFST_VEROFF_MASK (0xfff << 0) + +/* Global control */ +#define FIMC_REG_CIGCTRL 0x08 +#define FIMC_REG_CIGCTRL_SWRST (1 << 31) +#define FIMC_REG_CIGCTRL_CAMRST_A (1 << 30) +#define FIMC_REG_CIGCTRL_SELCAM_ITU_A (1 << 29) +#define FIMC_REG_CIGCTRL_TESTPAT_NORMAL (0 << 27) +#define FIMC_REG_CIGCTRL_TESTPAT_COLOR_BAR (1 << 27) +#define FIMC_REG_CIGCTRL_TESTPAT_HOR_INC (2 << 27) +#define FIMC_REG_CIGCTRL_TESTPAT_VER_INC (3 << 27) +#define FIMC_REG_CIGCTRL_TESTPAT_MASK (3 << 27) +#define FIMC_REG_CIGCTRL_TESTPAT_SHIFT 27 +#define FIMC_REG_CIGCTRL_INVPOLPCLK (1 << 26) +#define FIMC_REG_CIGCTRL_INVPOLVSYNC (1 << 25) +#define FIMC_REG_CIGCTRL_INVPOLHREF (1 << 24) +#define FIMC_REG_CIGCTRL_IRQ_OVFEN (1 << 22) +#define FIMC_REG_CIGCTRL_HREF_MASK (1 << 21) +#define FIMC_REG_CIGCTRL_IRQ_LEVEL (1 << 20) +#define FIMC_REG_CIGCTRL_IRQ_CLR (1 << 19) +#define FIMC_REG_CIGCTRL_IRQ_ENABLE (1 << 16) +#define FIMC_REG_CIGCTRL_SHDW_DISABLE (1 << 12) +/* 0 - selects Writeback A (LCD), 1 - selects Writeback B (LCD/ISP) */ +#define FIMC_REG_CIGCTRL_SELWB_A (1 << 10) +#define FIMC_REG_CIGCTRL_CAM_JPEG (1 << 8) +#define FIMC_REG_CIGCTRL_SELCAM_MIPI_A (1 << 7) +#define FIMC_REG_CIGCTRL_CAMIF_SELWB (1 << 6) +/* 0 - ITU601; 1 - ITU709 */ +#define FIMC_REG_CIGCTRL_CSC_ITU601_709 (1 << 5) +#define FIMC_REG_CIGCTRL_INVPOLHSYNC (1 << 4) +#define FIMC_REG_CIGCTRL_SELCAM_MIPI (1 << 3) +#define FIMC_REG_CIGCTRL_INVPOLFIELD (1 << 1) +#define FIMC_REG_CIGCTRL_INTERLACE (1 << 0) + +/* Window offset 2 */ +#define FIMC_REG_CIWDOFST2 0x14 +#define FIMC_REG_CIWDOFST2_HOROFF_MASK (0xfff << 16) +#define FIMC_REG_CIWDOFST2_VEROFF_MASK (0xfff << 0) + +/* Output DMA Y/Cb/Cr plane start addresses */ +#define FIMC_REG_CIOYSA(n) (0x18 + (n) * 4) +#define FIMC_REG_CIOCBSA(n) (0x28 + (n) * 4) +#define FIMC_REG_CIOCRSA(n) (0x38 + (n) * 4) + +/* Target image format */ +#define FIMC_REG_CITRGFMT 0x48 +#define FIMC_REG_CITRGFMT_INROT90 (1 << 31) +#define FIMC_REG_CITRGFMT_YCBCR420 (0 << 29) +#define FIMC_REG_CITRGFMT_YCBCR422 (1 << 29) +#define FIMC_REG_CITRGFMT_YCBCR422_1P (2 << 29) +#define FIMC_REG_CITRGFMT_RGB (3 << 29) +#define FIMC_REG_CITRGFMT_FMT_MASK (3 << 29) +#define FIMC_REG_CITRGFMT_HSIZE_MASK (0xfff << 16) +#define FIMC_REG_CITRGFMT_FLIP_SHIFT 14 +#define FIMC_REG_CITRGFMT_FLIP_NORMAL (0 << 14) +#define FIMC_REG_CITRGFMT_FLIP_X_MIRROR (1 << 14) +#define FIMC_REG_CITRGFMT_FLIP_Y_MIRROR (2 << 14) +#define FIMC_REG_CITRGFMT_FLIP_180 (3 << 14) +#define FIMC_REG_CITRGFMT_FLIP_MASK (3 << 14) +#define FIMC_REG_CITRGFMT_OUTROT90 (1 << 13) +#define FIMC_REG_CITRGFMT_VSIZE_MASK (0xfff << 0) + +/* Output DMA control */ +#define FIMC_REG_CIOCTRL 0x4c +#define FIMC_REG_CIOCTRL_ORDER422_MASK (3 << 0) +#define FIMC_REG_CIOCTRL_ORDER422_YCBYCR (0 << 0) +#define FIMC_REG_CIOCTRL_ORDER422_YCRYCB (1 << 0) +#define FIMC_REG_CIOCTRL_ORDER422_CBYCRY (2 << 0) +#define FIMC_REG_CIOCTRL_ORDER422_CRYCBY (3 << 0) +#define FIMC_REG_CIOCTRL_LASTIRQ_ENABLE (1 << 2) +#define FIMC_REG_CIOCTRL_YCBCR_3PLANE (0 << 3) +#define FIMC_REG_CIOCTRL_YCBCR_2PLANE (1 << 3) +#define FIMC_REG_CIOCTRL_YCBCR_PLANE_MASK (1 << 3) +#define FIMC_REG_CIOCTRL_ALPHA_OUT_MASK (0xff << 4) +#define FIMC_REG_CIOCTRL_RGB16FMT_MASK (3 << 16) +#define FIMC_REG_CIOCTRL_RGB565 (0 << 16) +#define FIMC_REG_CIOCTRL_ARGB1555 (1 << 16) +#define FIMC_REG_CIOCTRL_ARGB4444 (2 << 16) +#define FIMC_REG_CIOCTRL_ORDER2P_SHIFT 24 +#define FIMC_REG_CIOCTRL_ORDER2P_MASK (3 << 24) +#define FIMC_REG_CIOCTRL_ORDER422_2P_LSB_CRCB (0 << 24) + +/* Pre-scaler control 1 */ +#define FIMC_REG_CISCPRERATIO 0x50 + +#define FIMC_REG_CISCPREDST 0x54 + +/* Main scaler control */ +#define FIMC_REG_CISCCTRL 0x58 +#define FIMC_REG_CISCCTRL_SCALERBYPASS (1 << 31) +#define FIMC_REG_CISCCTRL_SCALEUP_H (1 << 30) +#define FIMC_REG_CISCCTRL_SCALEUP_V (1 << 29) +#define FIMC_REG_CISCCTRL_CSCR2Y_WIDE (1 << 28) +#define FIMC_REG_CISCCTRL_CSCY2R_WIDE (1 << 27) +#define FIMC_REG_CISCCTRL_LCDPATHEN_FIFO (1 << 26) +#define FIMC_REG_CISCCTRL_INTERLACE (1 << 25) +#define FIMC_REG_CISCCTRL_SCALERSTART (1 << 15) +#define FIMC_REG_CISCCTRL_INRGB_FMT_RGB565 (0 << 13) +#define FIMC_REG_CISCCTRL_INRGB_FMT_RGB666 (1 << 13) +#define FIMC_REG_CISCCTRL_INRGB_FMT_RGB888 (2 << 13) +#define FIMC_REG_CISCCTRL_INRGB_FMT_MASK (3 << 13) +#define FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB565 (0 << 11) +#define FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB666 (1 << 11) +#define FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB888 (2 << 11) +#define FIMC_REG_CISCCTRL_OUTRGB_FMT_MASK (3 << 11) +#define FIMC_REG_CISCCTRL_RGB_EXT (1 << 10) +#define FIMC_REG_CISCCTRL_ONE2ONE (1 << 9) +#define FIMC_REG_CISCCTRL_MHRATIO(x) ((x) << 16) +#define FIMC_REG_CISCCTRL_MVRATIO(x) ((x) << 0) +#define FIMC_REG_CISCCTRL_MHRATIO_MASK (0x1ff << 16) +#define FIMC_REG_CISCCTRL_MVRATIO_MASK (0x1ff << 0) +#define FIMC_REG_CISCCTRL_MHRATIO_EXT(x) (((x) >> 6) << 16) +#define FIMC_REG_CISCCTRL_MVRATIO_EXT(x) (((x) >> 6) << 0) + +/* Target area */ +#define FIMC_REG_CITAREA 0x5c +#define FIMC_REG_CITAREA_MASK 0x0fffffff + +/* General status */ +#define FIMC_REG_CISTATUS 0x64 +#define FIMC_REG_CISTATUS_OVFIY (1 << 31) +#define FIMC_REG_CISTATUS_OVFICB (1 << 30) +#define FIMC_REG_CISTATUS_OVFICR (1 << 29) +#define FIMC_REG_CISTATUS_VSYNC (1 << 28) +#define FIMC_REG_CISTATUS_FRAMECNT_MASK (3 << 26) +#define FIMC_REG_CISTATUS_FRAMECNT_SHIFT 26 +#define FIMC_REG_CISTATUS_WINOFF_EN (1 << 25) +#define FIMC_REG_CISTATUS_IMGCPT_EN (1 << 22) +#define FIMC_REG_CISTATUS_IMGCPT_SCEN (1 << 21) +#define FIMC_REG_CISTATUS_VSYNC_A (1 << 20) +#define FIMC_REG_CISTATUS_VSYNC_B (1 << 19) +#define FIMC_REG_CISTATUS_OVRLB (1 << 18) +#define FIMC_REG_CISTATUS_FRAME_END (1 << 17) +#define FIMC_REG_CISTATUS_LASTCAPT_END (1 << 16) +#define FIMC_REG_CISTATUS_VVALID_A (1 << 15) +#define FIMC_REG_CISTATUS_VVALID_B (1 << 14) + +/* Indexes to the last and the currently processed buffer. */ +#define FIMC_REG_CISTATUS2 0x68 + +/* Image capture control */ +#define FIMC_REG_CIIMGCPT 0xc0 +#define FIMC_REG_CIIMGCPT_IMGCPTEN (1 << 31) +#define FIMC_REG_CIIMGCPT_IMGCPTEN_SC (1 << 30) +#define FIMC_REG_CIIMGCPT_CPT_FREN_ENABLE (1 << 25) +#define FIMC_REG_CIIMGCPT_CPT_FRMOD_CNT (1 << 18) + +/* Frame capture sequence */ +#define FIMC_REG_CICPTSEQ 0xc4 + +/* Image effect */ +#define FIMC_REG_CIIMGEFF 0xd0 +#define FIMC_REG_CIIMGEFF_IE_ENABLE (1 << 30) +#define FIMC_REG_CIIMGEFF_IE_SC_BEFORE (0 << 29) +#define FIMC_REG_CIIMGEFF_IE_SC_AFTER (1 << 29) +#define FIMC_REG_CIIMGEFF_FIN_BYPASS (0 << 26) +#define FIMC_REG_CIIMGEFF_FIN_ARBITRARY (1 << 26) +#define FIMC_REG_CIIMGEFF_FIN_NEGATIVE (2 << 26) +#define FIMC_REG_CIIMGEFF_FIN_ARTFREEZE (3 << 26) +#define FIMC_REG_CIIMGEFF_FIN_EMBOSSING (4 << 26) +#define FIMC_REG_CIIMGEFF_FIN_SILHOUETTE (5 << 26) +#define FIMC_REG_CIIMGEFF_FIN_MASK (7 << 26) +#define FIMC_REG_CIIMGEFF_PAT_CBCR_MASK ((0xff << 13) | 0xff) + +/* Input DMA Y/Cb/Cr plane start address 0/1 */ +#define FIMC_REG_CIIYSA(n) (0xd4 + (n) * 0x70) +#define FIMC_REG_CIICBSA(n) (0xd8 + (n) * 0x70) +#define FIMC_REG_CIICRSA(n) (0xdc + (n) * 0x70) + +/* Real input DMA image size */ +#define FIMC_REG_CIREAL_ISIZE 0xf8 +#define FIMC_REG_CIREAL_ISIZE_AUTOLOAD_EN (1 << 31) +#define FIMC_REG_CIREAL_ISIZE_ADDR_CH_DIS (1 << 30) + +/* Input DMA control */ +#define FIMC_REG_MSCTRL 0xfc +#define FIMC_REG_MSCTRL_IN_BURST_COUNT_MASK (0xf << 24) +#define FIMC_REG_MSCTRL_2P_IN_ORDER_MASK (3 << 16) +#define FIMC_REG_MSCTRL_2P_IN_ORDER_SHIFT 16 +#define FIMC_REG_MSCTRL_C_INT_IN_3PLANE (0 << 15) +#define FIMC_REG_MSCTRL_C_INT_IN_2PLANE (1 << 15) +#define FIMC_REG_MSCTRL_C_INT_IN_MASK (1 << 15) +#define FIMC_REG_MSCTRL_FLIP_SHIFT 13 +#define FIMC_REG_MSCTRL_FLIP_MASK (3 << 13) +#define FIMC_REG_MSCTRL_FLIP_NORMAL (0 << 13) +#define FIMC_REG_MSCTRL_FLIP_X_MIRROR (1 << 13) +#define FIMC_REG_MSCTRL_FLIP_Y_MIRROR (2 << 13) +#define FIMC_REG_MSCTRL_FLIP_180 (3 << 13) +#define FIMC_REG_MSCTRL_FIFO_CTRL_FULL (1 << 12) +#define FIMC_REG_MSCTRL_ORDER422_SHIFT 4 +#define FIMC_REG_MSCTRL_ORDER422_CRYCBY (0 << 4) +#define FIMC_REG_MSCTRL_ORDER422_YCRYCB (1 << 4) +#define FIMC_REG_MSCTRL_ORDER422_CBYCRY (2 << 4) +#define FIMC_REG_MSCTRL_ORDER422_YCBYCR (3 << 4) +#define FIMC_REG_MSCTRL_ORDER422_MASK (3 << 4) +#define FIMC_REG_MSCTRL_INPUT_EXTCAM (0 << 3) +#define FIMC_REG_MSCTRL_INPUT_MEMORY (1 << 3) +#define FIMC_REG_MSCTRL_INPUT_MASK (1 << 3) +#define FIMC_REG_MSCTRL_INFORMAT_YCBCR420 (0 << 1) +#define FIMC_REG_MSCTRL_INFORMAT_YCBCR422 (1 << 1) +#define FIMC_REG_MSCTRL_INFORMAT_YCBCR422_1P (2 << 1) +#define FIMC_REG_MSCTRL_INFORMAT_RGB (3 << 1) +#define FIMC_REG_MSCTRL_INFORMAT_MASK (3 << 1) +#define FIMC_REG_MSCTRL_ENVID (1 << 0) +#define FIMC_REG_MSCTRL_IN_BURST_COUNT(x) ((x) << 24) + +/* Output DMA Y/Cb/Cr offset */ +#define FIMC_REG_CIOYOFF 0x168 +#define FIMC_REG_CIOCBOFF 0x16c +#define FIMC_REG_CIOCROFF 0x170 + +/* Input DMA Y/Cb/Cr offset */ +#define FIMC_REG_CIIYOFF 0x174 +#define FIMC_REG_CIICBOFF 0x178 +#define FIMC_REG_CIICROFF 0x17c + +/* Input DMA original image size */ +#define FIMC_REG_ORGISIZE 0x180 + +/* Output DMA original image size */ +#define FIMC_REG_ORGOSIZE 0x184 + +/* Real output DMA image size (extension register) */ +#define FIMC_REG_CIEXTEN 0x188 +#define FIMC_REG_CIEXTEN_MHRATIO_EXT(x) (((x) & 0x3f) << 10) +#define FIMC_REG_CIEXTEN_MVRATIO_EXT(x) ((x) & 0x3f) +#define FIMC_REG_CIEXTEN_MHRATIO_EXT_MASK (0x3f << 10) +#define FIMC_REG_CIEXTEN_MVRATIO_EXT_MASK 0x3f + +#define FIMC_REG_CIDMAPARAM 0x18c +#define FIMC_REG_CIDMAPARAM_R_LINEAR (0 << 29) +#define FIMC_REG_CIDMAPARAM_R_64X32 (3 << 29) +#define FIMC_REG_CIDMAPARAM_W_LINEAR (0 << 13) +#define FIMC_REG_CIDMAPARAM_W_64X32 (3 << 13) +#define FIMC_REG_CIDMAPARAM_TILE_MASK ((3 << 29) | (3 << 13)) + +/* MIPI CSI image format */ +#define FIMC_REG_CSIIMGFMT 0x194 +#define FIMC_REG_CSIIMGFMT_YCBCR422_8BIT 0x1e +#define FIMC_REG_CSIIMGFMT_RAW8 0x2a +#define FIMC_REG_CSIIMGFMT_RAW10 0x2b +#define FIMC_REG_CSIIMGFMT_RAW12 0x2c +/* User defined formats. x = 0...16. */ +#define FIMC_REG_CSIIMGFMT_USER(x) (0x30 + x - 1) + +/* Output frame buffer sequence mask */ +#define FIMC_REG_CIFCNTSEQ 0x1fc + +/* SYSREG ISP Writeback register address offsets */ +#define SYSREG_ISPBLK 0x020c +#define SYSREG_ISPBLK_FIFORST_CAM_BLK (1 << 7) + +#define SYSREG_CAMBLK 0x0218 +#define SYSREG_CAMBLK_FIFORST_ISP (1 << 15) +#define SYSREG_CAMBLK_ISPWB_FULL_EN (7 << 20) + +/* + * Function declarations + */ +void fimc_hw_reset(struct fimc_dev *fimc); +void fimc_hw_set_rotation(struct fimc_ctx *ctx); +void fimc_hw_set_target_format(struct fimc_ctx *ctx); +void fimc_hw_set_out_dma(struct fimc_ctx *ctx); +void fimc_hw_en_lastirq(struct fimc_dev *fimc, int enable); +void fimc_hw_en_irq(struct fimc_dev *fimc, int enable); +void fimc_hw_set_prescaler(struct fimc_ctx *ctx); +void fimc_hw_set_mainscaler(struct fimc_ctx *ctx); +void fimc_hw_enable_capture(struct fimc_ctx *ctx); +void fimc_hw_set_effect(struct fimc_ctx *ctx); +void fimc_hw_set_rgb_alpha(struct fimc_ctx *ctx); +void fimc_hw_set_in_dma(struct fimc_ctx *ctx); +void fimc_hw_set_input_path(struct fimc_ctx *ctx); +void fimc_hw_set_output_path(struct fimc_ctx *ctx); +void fimc_hw_set_input_addr(struct fimc_dev *fimc, struct fimc_addr *paddr); +void fimc_hw_set_output_addr(struct fimc_dev *fimc, struct fimc_addr *paddr, + int index); +int fimc_hw_set_camera_source(struct fimc_dev *fimc, + struct fimc_source_info *cam); +void fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f); +int fimc_hw_set_camera_polarity(struct fimc_dev *fimc, + struct fimc_source_info *cam); +int fimc_hw_set_camera_type(struct fimc_dev *fimc, + struct fimc_source_info *cam); +void fimc_hw_clear_irq(struct fimc_dev *dev); +void fimc_hw_enable_scaler(struct fimc_dev *dev, bool on); +void fimc_hw_activate_input_dma(struct fimc_dev *dev, bool on); +void fimc_hw_disable_capture(struct fimc_dev *dev); +s32 fimc_hw_get_frame_index(struct fimc_dev *dev); +s32 fimc_hw_get_prev_frame_index(struct fimc_dev *dev); +int fimc_hw_camblk_cfg_writeback(struct fimc_dev *fimc); +void fimc_activate_capture(struct fimc_ctx *ctx); +void fimc_deactivate_capture(struct fimc_dev *fimc); + +/** + * fimc_hw_set_dma_seq - configure output DMA buffer sequence + * @mask: bitmask for the DMA output buffer registers, set to 0 to skip buffer + * This function masks output DMA ring buffers, it allows to select which of + * the 32 available output buffer address registers will be used by the DMA + * engine. + */ +static inline void fimc_hw_set_dma_seq(struct fimc_dev *dev, u32 mask) +{ + writel(mask, dev->regs + FIMC_REG_CIFCNTSEQ); +} + +#endif /* FIMC_REG_H_ */ diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c new file mode 100644 index 00000000..b5b480be --- /dev/null +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -0,0 +1,1511 @@ +/* + * S5P/EXYNOS4 SoC series camera host interface media device driver + * + * Copyright (C) 2011 - 2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "media-dev.h" +#include "fimc-core.h" +#include "fimc-is.h" +#include "fimc-lite.h" +#include "mipi-csis.h" + +static int __fimc_md_set_camclk(struct fimc_md *fmd, + struct fimc_source_info *si, + bool on); +/** + * fimc_pipeline_prepare - update pipeline information with subdevice pointers + * @me: media entity terminating the pipeline + * + * Caller holds the graph mutex. + */ +static void fimc_pipeline_prepare(struct fimc_pipeline *p, + struct media_entity *me) +{ + struct v4l2_subdev *sd; + int i; + + for (i = 0; i < IDX_MAX; i++) + p->subdevs[i] = NULL; + + while (1) { + struct media_pad *pad = NULL; + + /* Find remote source pad */ + for (i = 0; i < me->num_pads; i++) { + struct media_pad *spad = &me->pads[i]; + if (!(spad->flags & MEDIA_PAD_FL_SINK)) + continue; + pad = media_entity_remote_source(spad); + if (pad) + break; + } + + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + sd = media_entity_to_v4l2_subdev(pad->entity); + + switch (sd->grp_id) { + case GRP_ID_FIMC_IS_SENSOR: + case GRP_ID_SENSOR: + p->subdevs[IDX_SENSOR] = sd; + break; + case GRP_ID_CSIS: + p->subdevs[IDX_CSIS] = sd; + break; + case GRP_ID_FLITE: + p->subdevs[IDX_FLITE] = sd; + break; + case GRP_ID_FIMC: + /* No need to control FIMC subdev through subdev ops */ + break; + case GRP_ID_FIMC_IS: + p->subdevs[IDX_IS_ISP] = sd; + break; + default: + break; + } + me = &sd->entity; + if (me->num_pads == 1) + break; + } +} + +/** + * __subdev_set_power - change power state of a single subdev + * @sd: subdevice to change power state for + * @on: 1 to enable power or 0 to disable + * + * Return result of s_power subdev operation or -ENXIO if sd argument + * is NULL. Return 0 if the subdevice does not implement s_power. + */ +static int __subdev_set_power(struct v4l2_subdev *sd, int on) +{ + int *use_count; + int ret; + + if (sd == NULL) + return -ENXIO; + + use_count = &sd->entity.use_count; + if (on && (*use_count)++ > 0) + return 0; + else if (!on && (*use_count == 0 || --(*use_count) > 0)) + return 0; + ret = v4l2_subdev_call(sd, core, s_power, on); + + return ret != -ENOIOCTLCMD ? ret : 0; +} + +/** + * fimc_pipeline_s_power - change power state of all pipeline subdevs + * @fimc: fimc device terminating the pipeline + * @state: true to power on, false to power off + * + * Needs to be called with the graph mutex held. + */ +static int fimc_pipeline_s_power(struct fimc_pipeline *p, bool on) +{ + static const u8 seq[2][IDX_MAX - 1] = { + { IDX_IS_ISP, IDX_SENSOR, IDX_CSIS, IDX_FLITE }, + { IDX_CSIS, IDX_FLITE, IDX_SENSOR, IDX_IS_ISP }, + }; + int i, ret = 0; + + if (p->subdevs[IDX_SENSOR] == NULL) + return -ENXIO; + + for (i = 0; i < IDX_MAX - 1; i++) { + unsigned int idx = seq[on][i]; + + ret = __subdev_set_power(p->subdevs[idx], on); + + + if (ret < 0 && ret != -ENXIO) + goto error; + } + return 0; +error: + for (; i >= 0; i--) { + unsigned int idx = seq[on][i]; + __subdev_set_power(p->subdevs[idx], !on); + } + return ret; +} + +/** + * __fimc_pipeline_open - update the pipeline information, enable power + * of all pipeline subdevs and the sensor clock + * @me: media entity to start graph walk with + * @prepare: true to walk the current pipeline and acquire all subdevs + * + * Called with the graph mutex held. + */ +static int __fimc_pipeline_open(struct fimc_pipeline *p, + struct media_entity *me, bool prepare) +{ + struct fimc_md *fmd = entity_to_fimc_mdev(me); + struct v4l2_subdev *sd; + int ret; + + if (WARN_ON(p == NULL || me == NULL)) + return -EINVAL; + + if (prepare) + fimc_pipeline_prepare(p, me); + + sd = p->subdevs[IDX_SENSOR]; + if (sd == NULL) + return -EINVAL; + + /* Disable PXLASYNC clock if this pipeline includes FIMC-IS */ + if (!IS_ERR(fmd->wbclk[CLK_IDX_WB_B]) && p->subdevs[IDX_IS_ISP]) { + ret = clk_prepare_enable(fmd->wbclk[CLK_IDX_WB_B]); + if (ret < 0) + return ret; + } + ret = fimc_md_set_camclk(sd, true); + if (ret < 0) + goto err_wbclk; + + ret = fimc_pipeline_s_power(p, 1); + if (!ret) + return 0; + + fimc_md_set_camclk(sd, false); + +err_wbclk: + if (!IS_ERR(fmd->wbclk[CLK_IDX_WB_B]) && p->subdevs[IDX_IS_ISP]) + clk_disable_unprepare(fmd->wbclk[CLK_IDX_WB_B]); + + return ret; +} + +/** + * __fimc_pipeline_close - disable the sensor clock and pipeline power + * @fimc: fimc device terminating the pipeline + * + * Disable power of all subdevs and turn the external sensor clock off. + */ +static int __fimc_pipeline_close(struct fimc_pipeline *p) +{ + struct v4l2_subdev *sd = p ? p->subdevs[IDX_SENSOR] : NULL; + struct fimc_md *fmd; + int ret = 0; + + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (p->subdevs[IDX_SENSOR]) { + ret = fimc_pipeline_s_power(p, 0); + fimc_md_set_camclk(sd, false); + } + + fmd = entity_to_fimc_mdev(&sd->entity); + + /* Disable PXLASYNC clock if this pipeline includes FIMC-IS */ + if (!IS_ERR(fmd->wbclk[CLK_IDX_WB_B]) && p->subdevs[IDX_IS_ISP]) + clk_disable_unprepare(fmd->wbclk[CLK_IDX_WB_B]); + + return ret == -ENXIO ? 0 : ret; +} + +/** + * __fimc_pipeline_s_stream - call s_stream() on pipeline subdevs + * @pipeline: video pipeline structure + * @on: passed as the s_stream() callback argument + */ +static int __fimc_pipeline_s_stream(struct fimc_pipeline *p, bool on) +{ + static const u8 seq[2][IDX_MAX] = { + { IDX_FIMC, IDX_SENSOR, IDX_IS_ISP, IDX_CSIS, IDX_FLITE }, + { IDX_CSIS, IDX_FLITE, IDX_FIMC, IDX_SENSOR, IDX_IS_ISP }, + }; + int i, ret = 0; + + if (p->subdevs[IDX_SENSOR] == NULL) + return -ENODEV; + + for (i = 0; i < IDX_MAX; i++) { + unsigned int idx = seq[on][i]; + + ret = v4l2_subdev_call(p->subdevs[idx], video, s_stream, on); + + if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) + goto error; + } + return 0; +error: + for (; i >= 0; i--) { + unsigned int idx = seq[on][i]; + v4l2_subdev_call(p->subdevs[idx], video, s_stream, !on); + } + return ret; +} + +/* Media pipeline operations for the FIMC/FIMC-LITE video device driver */ +static const struct fimc_pipeline_ops fimc_pipeline_ops = { + .open = __fimc_pipeline_open, + .close = __fimc_pipeline_close, + .set_stream = __fimc_pipeline_s_stream, +}; + +/* + * Sensor subdevice helper functions + */ +static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd, + struct fimc_source_info *si) +{ + struct i2c_adapter *adapter; + struct v4l2_subdev *sd = NULL; + + if (!si || !fmd) + return NULL; + /* + * If FIMC bus type is not Writeback FIFO assume it is same + * as sensor_bus_type. + */ + si->fimc_bus_type = si->sensor_bus_type; + + adapter = i2c_get_adapter(si->i2c_bus_num); + if (!adapter) { + v4l2_warn(&fmd->v4l2_dev, + "Failed to get I2C adapter %d, deferring probe\n", + si->i2c_bus_num); + return ERR_PTR(-EPROBE_DEFER); + } + sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter, + si->board_info, NULL); + if (IS_ERR_OR_NULL(sd)) { + i2c_put_adapter(adapter); + v4l2_warn(&fmd->v4l2_dev, + "Failed to acquire subdev %s, deferring probe\n", + si->board_info->type); + return ERR_PTR(-EPROBE_DEFER); + } + v4l2_set_subdev_hostdata(sd, si); + sd->grp_id = GRP_ID_SENSOR; + + v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice %s\n", + sd->name); + return sd; +} + +static void fimc_md_unregister_sensor(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_adapter *adapter; + + if (!client) + return; + + v4l2_device_unregister_subdev(sd); + + if (!client->dev.of_node) { + adapter = client->adapter; + i2c_unregister_device(client); + if (adapter) + i2c_put_adapter(adapter); + } +} + +#ifdef CONFIG_OF +/* Register I2C client subdev associated with @node. */ +static int fimc_md_of_add_sensor(struct fimc_md *fmd, + struct device_node *node, int index) +{ + struct fimc_sensor_info *si; + struct i2c_client *client; + struct v4l2_subdev *sd; + int ret; + + if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor))) + return -EINVAL; + si = &fmd->sensor[index]; + + client = of_find_i2c_device_by_node(node); + if (!client) + return -EPROBE_DEFER; + + device_lock(&client->dev); + + if (!client->driver || + !try_module_get(client->driver->driver.owner)) { + ret = -EPROBE_DEFER; + v4l2_info(&fmd->v4l2_dev, "No driver found for %s\n", + node->full_name); + goto dev_put; + } + + /* Enable sensor's master clock */ + ret = __fimc_md_set_camclk(fmd, &si->pdata, true); + if (ret < 0) + goto mod_put; + sd = i2c_get_clientdata(client); + + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); + __fimc_md_set_camclk(fmd, &si->pdata, false); + if (ret < 0) + goto mod_put; + + v4l2_set_subdev_hostdata(sd, &si->pdata); + if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK) + sd->grp_id = GRP_ID_FIMC_IS_SENSOR; + else + sd->grp_id = GRP_ID_SENSOR; + + si->subdev = sd; + v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n", + sd->name, fmd->num_sensors); + fmd->num_sensors++; + +mod_put: + module_put(client->driver->driver.owner); +dev_put: + device_unlock(&client->dev); + put_device(&client->dev); + return ret; +} + +/* Parse port node and register as a sub-device any sensor specified there. */ +static int fimc_md_parse_port_node(struct fimc_md *fmd, + struct device_node *port, + unsigned int index) +{ + struct device_node *rem, *ep, *np; + struct fimc_source_info *pd; + struct v4l2_of_endpoint endpoint; + int ret; + u32 val; + + pd = &fmd->sensor[index].pdata; + + /* Assume here a port node can have only one endpoint node. */ + ep = of_get_next_child(port, NULL); + if (!ep) + return 0; + + v4l2_of_parse_endpoint(ep, &endpoint); + if (WARN_ON(endpoint.port == 0) || index >= FIMC_MAX_SENSORS) + return -EINVAL; + + pd->mux_id = (endpoint.port - 1) & 0x1; + + rem = v4l2_of_get_remote_port_parent(ep); + of_node_put(ep); + if (rem == NULL) { + v4l2_info(&fmd->v4l2_dev, "Remote device at %s not found\n", + ep->full_name); + return 0; + } + if (!of_property_read_u32(rem, "samsung,camclk-out", &val)) + pd->clk_id = val; + + if (!of_property_read_u32(rem, "clock-frequency", &val)) + pd->clk_frequency = val; + + if (pd->clk_frequency == 0) { + v4l2_err(&fmd->v4l2_dev, "Wrong clock frequency at node %s\n", + rem->full_name); + of_node_put(rem); + return -EINVAL; + } + + if (fimc_input_is_parallel(endpoint.port)) { + if (endpoint.bus_type == V4L2_MBUS_PARALLEL) + pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_601; + else + pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_656; + pd->flags = endpoint.bus.parallel.flags; + } else if (fimc_input_is_mipi_csi(endpoint.port)) { + /* + * MIPI CSI-2: only input mux selection and + * the sensor's clock frequency is needed. + */ + pd->sensor_bus_type = FIMC_BUS_TYPE_MIPI_CSI2; + } else { + v4l2_err(&fmd->v4l2_dev, "Wrong port id (%u) at node %s\n", + endpoint.port, rem->full_name); + } + /* + * For FIMC-IS handled sensors, that are placed under i2c-isp device + * node, FIMC is connected to the FIMC-IS through its ISP Writeback + * input. Sensors are attached to the FIMC-LITE hostdata interface + * directly or through MIPI-CSIS, depending on the external media bus + * used. This needs to be handled in a more reliable way, not by just + * checking parent's node name. + */ + np = of_get_parent(rem); + + if (np && !of_node_cmp(np->name, "i2c-isp")) + pd->fimc_bus_type = FIMC_BUS_TYPE_ISP_WRITEBACK; + else + pd->fimc_bus_type = pd->sensor_bus_type; + + ret = fimc_md_of_add_sensor(fmd, rem, index); + of_node_put(rem); + + return ret; +} + +/* Register all SoC external sub-devices */ +static int fimc_md_of_sensors_register(struct fimc_md *fmd, + struct device_node *np) +{ + struct device_node *parent = fmd->pdev->dev.of_node; + struct device_node *node, *ports; + int index = 0; + int ret; + + /* Attach sensors linked to MIPI CSI-2 receivers */ + for_each_available_child_of_node(parent, node) { + struct device_node *port; + + if (of_node_cmp(node->name, "csis")) + continue; + /* The csis node can have only port subnode. */ + port = of_get_next_child(node, NULL); + if (!port) + continue; + + ret = fimc_md_parse_port_node(fmd, port, index); + if (ret < 0) + return ret; + index++; + } + + /* Attach sensors listed in the parallel-ports node */ + ports = of_get_child_by_name(parent, "parallel-ports"); + if (!ports) + return 0; + + for_each_child_of_node(ports, node) { + ret = fimc_md_parse_port_node(fmd, node, index); + if (ret < 0) + break; + index++; + } + + return 0; +} + +static int __of_get_csis_id(struct device_node *np) +{ + u32 reg = 0; + + np = of_get_child_by_name(np, "port"); + if (!np) + return -EINVAL; + of_property_read_u32(np, "reg", ®); + return reg - FIMC_INPUT_MIPI_CSI2_0; +} +#else +#define fimc_md_of_sensors_register(fmd, np) (-ENOSYS) +#define __of_get_csis_id(np) (-ENOSYS) +#endif + +static int fimc_md_register_sensor_entities(struct fimc_md *fmd) +{ + struct s5p_platform_fimc *pdata = fmd->pdev->dev.platform_data; + struct device_node *of_node = fmd->pdev->dev.of_node; + int num_clients = 0; + int ret, i; + + /* + * Runtime resume one of the FIMC entities to make sure + * the sclk_cam clocks are not globally disabled. + */ + if (!fmd->pmf) + return -ENXIO; + + ret = pm_runtime_get_sync(fmd->pmf); + if (ret < 0) + return ret; + + if (of_node) { + fmd->num_sensors = 0; + ret = fimc_md_of_sensors_register(fmd, of_node); + } else if (pdata) { + WARN_ON(pdata->num_clients > ARRAY_SIZE(fmd->sensor)); + num_clients = min_t(u32, pdata->num_clients, + ARRAY_SIZE(fmd->sensor)); + fmd->num_sensors = num_clients; + + for (i = 0; i < num_clients; i++) { + struct fimc_sensor_info *si = &fmd->sensor[i]; + struct v4l2_subdev *sd; + + si->pdata = pdata->source_info[i]; + ret = __fimc_md_set_camclk(fmd, &si->pdata, true); + if (ret) + break; + sd = fimc_md_register_sensor(fmd, &si->pdata); + ret = __fimc_md_set_camclk(fmd, &si->pdata, false); + + if (IS_ERR(sd)) { + si->subdev = NULL; + ret = PTR_ERR(sd); + break; + } + si->subdev = sd; + if (ret) + break; + } + } + + pm_runtime_put(fmd->pmf); + return ret; +} + +/* + * MIPI-CSIS, FIMC and FIMC-LITE platform devices registration. + */ + +static int register_fimc_lite_entity(struct fimc_md *fmd, + struct fimc_lite *fimc_lite) +{ + struct v4l2_subdev *sd; + int ret; + + if (WARN_ON(fimc_lite->index >= FIMC_LITE_MAX_DEVS || + fmd->fimc_lite[fimc_lite->index])) + return -EBUSY; + + sd = &fimc_lite->subdev; + sd->grp_id = GRP_ID_FLITE; + v4l2_set_subdev_hostdata(sd, (void *)&fimc_pipeline_ops); + + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); + if (!ret) + fmd->fimc_lite[fimc_lite->index] = fimc_lite; + else + v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.LITE%d\n", + fimc_lite->index); + return ret; +} + +static int register_fimc_entity(struct fimc_md *fmd, struct fimc_dev *fimc) +{ + struct v4l2_subdev *sd; + int ret; + + if (WARN_ON(fimc->id >= FIMC_MAX_DEVS || fmd->fimc[fimc->id])) + return -EBUSY; + + sd = &fimc->vid_cap.subdev; + sd->grp_id = GRP_ID_FIMC; + v4l2_set_subdev_hostdata(sd, (void *)&fimc_pipeline_ops); + + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); + if (!ret) { + if (!fmd->pmf && fimc->pdev) + fmd->pmf = &fimc->pdev->dev; + fmd->fimc[fimc->id] = fimc; + fimc->vid_cap.user_subdev_api = fmd->user_subdev_api; + } else { + v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.%d (%d)\n", + fimc->id, ret); + } + return ret; +} + +static int register_csis_entity(struct fimc_md *fmd, + struct platform_device *pdev, + struct v4l2_subdev *sd) +{ + struct device_node *node = pdev->dev.of_node; + int id, ret; + + id = node ? __of_get_csis_id(node) : max(0, pdev->id); + + if (WARN_ON(id < 0 || id >= CSIS_MAX_ENTITIES)) + return -ENOENT; + + if (WARN_ON(fmd->csis[id].sd)) + return -EBUSY; + + sd->grp_id = GRP_ID_CSIS; + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); + if (!ret) + fmd->csis[id].sd = sd; + else + v4l2_err(&fmd->v4l2_dev, + "Failed to register MIPI-CSIS.%d (%d)\n", id, ret); + return ret; +} + +static int register_fimc_is_entity(struct fimc_md *fmd, struct fimc_is *is) +{ + struct v4l2_subdev *sd = &is->isp.subdev; + int ret; + + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); + if (ret) { + v4l2_err(&fmd->v4l2_dev, + "Failed to register FIMC-ISP (%d)\n", ret); + return ret; + } + + fmd->fimc_is = is; + return 0; +} + +static int fimc_md_register_platform_entity(struct fimc_md *fmd, + struct platform_device *pdev, + int plat_entity) +{ + struct device *dev = &pdev->dev; + int ret = -EPROBE_DEFER; + void *drvdata; + + /* Lock to ensure dev->driver won't change. */ + device_lock(dev); + + if (!dev->driver || !try_module_get(dev->driver->owner)) + goto dev_unlock; + + drvdata = dev_get_drvdata(dev); + /* Some subdev didn't probe succesfully id drvdata is NULL */ + if (drvdata) { + switch (plat_entity) { + case IDX_FIMC: + ret = register_fimc_entity(fmd, drvdata); + break; + case IDX_FLITE: + ret = register_fimc_lite_entity(fmd, drvdata); + break; + case IDX_CSIS: + ret = register_csis_entity(fmd, pdev, drvdata); + break; + case IDX_IS_ISP: + ret = register_fimc_is_entity(fmd, drvdata); + break; + default: + ret = -ENODEV; + } + } + + module_put(dev->driver->owner); +dev_unlock: + device_unlock(dev); + if (ret == -EPROBE_DEFER) + dev_info(&fmd->pdev->dev, "deferring %s device registration\n", + dev_name(dev)); + else if (ret < 0) + dev_err(&fmd->pdev->dev, "%s device registration failed (%d)\n", + dev_name(dev), ret); + return ret; +} + +static int fimc_md_pdev_match(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + int plat_entity = -1; + int ret; + char *p; + + if (!get_device(dev)) + return -ENODEV; + + if (!strcmp(pdev->name, CSIS_DRIVER_NAME)) { + plat_entity = IDX_CSIS; + } else if (!strcmp(pdev->name, FIMC_LITE_DRV_NAME)) { + plat_entity = IDX_FLITE; + } else { + p = strstr(pdev->name, "fimc"); + if (p && *(p + 4) == 0) + plat_entity = IDX_FIMC; + } + + if (plat_entity >= 0) + ret = fimc_md_register_platform_entity(data, pdev, + plat_entity); + put_device(dev); + return 0; +} + +/* Register FIMC, FIMC-LITE and CSIS media entities */ +#ifdef CONFIG_OF +static int fimc_md_register_of_platform_entities(struct fimc_md *fmd, + struct device_node *parent) +{ + struct device_node *node; + int ret = 0; + + for_each_available_child_of_node(parent, node) { + struct platform_device *pdev; + int plat_entity = -1; + + pdev = of_find_device_by_node(node); + if (!pdev) + continue; + + /* If driver of any entity isn't ready try all again later. */ + if (!strcmp(node->name, CSIS_OF_NODE_NAME)) + plat_entity = IDX_CSIS; + else if (!strcmp(node->name, FIMC_IS_OF_NODE_NAME)) + plat_entity = IDX_IS_ISP; + else if (!strcmp(node->name, FIMC_LITE_OF_NODE_NAME)) + plat_entity = IDX_FLITE; + else if (!strcmp(node->name, FIMC_OF_NODE_NAME) && + !of_property_read_bool(node, "samsung,lcd-wb")) + plat_entity = IDX_FIMC; + + if (plat_entity >= 0) + ret = fimc_md_register_platform_entity(fmd, pdev, + plat_entity); + put_device(&pdev->dev); + if (ret < 0) + break; + } + + return ret; +} +#else +#define fimc_md_register_of_platform_entities(fmd, node) (-ENOSYS) +#endif + +static void fimc_md_unregister_entities(struct fimc_md *fmd) +{ + int i; + + for (i = 0; i < FIMC_MAX_DEVS; i++) { + if (fmd->fimc[i] == NULL) + continue; + v4l2_device_unregister_subdev(&fmd->fimc[i]->vid_cap.subdev); + fmd->fimc[i]->pipeline_ops = NULL; + fmd->fimc[i] = NULL; + } + for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { + if (fmd->fimc_lite[i] == NULL) + continue; + v4l2_device_unregister_subdev(&fmd->fimc_lite[i]->subdev); + fmd->fimc_lite[i]->pipeline_ops = NULL; + fmd->fimc_lite[i] = NULL; + } + for (i = 0; i < CSIS_MAX_ENTITIES; i++) { + if (fmd->csis[i].sd == NULL) + continue; + v4l2_device_unregister_subdev(fmd->csis[i].sd); + fmd->csis[i].sd = NULL; + } + for (i = 0; i < fmd->num_sensors; i++) { + if (fmd->sensor[i].subdev == NULL) + continue; + fimc_md_unregister_sensor(fmd->sensor[i].subdev); + fmd->sensor[i].subdev = NULL; + } + + if (fmd->fimc_is) + v4l2_device_unregister_subdev(&fmd->fimc_is->isp.subdev); + + v4l2_info(&fmd->v4l2_dev, "Unregistered all entities\n"); +} + +/** + * __fimc_md_create_fimc_links - create links to all FIMC entities + * @fmd: fimc media device + * @source: the source entity to create links to all fimc entities from + * @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null + * @pad: the source entity pad index + * @link_mask: bitmask of the fimc devices for which link should be enabled + */ +static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd, + struct media_entity *source, + struct v4l2_subdev *sensor, + int pad, int link_mask) +{ + struct fimc_source_info *si = NULL; + struct media_entity *sink; + unsigned int flags = 0; + int i, ret = 0; + + if (sensor) { + si = v4l2_get_subdev_hostdata(sensor); + /* Skip direct FIMC links in the logical FIMC-IS sensor path */ + if (si && si->fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK) + ret = 1; + } + + for (i = 0; !ret && i < FIMC_MAX_DEVS; i++) { + if (!fmd->fimc[i]) + continue; + /* + * Some FIMC variants are not fitted with camera capture + * interface. Skip creating a link from sensor for those. + */ + if (!fmd->fimc[i]->variant->has_cam_if) + continue; + + flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0; + + sink = &fmd->fimc[i]->vid_cap.subdev.entity; + ret = media_entity_create_link(source, pad, sink, + FIMC_SD_PAD_SINK_CAM, flags); + if (ret) + return ret; + + /* Notify FIMC capture subdev entity */ + ret = media_entity_call(sink, link_setup, &sink->pads[0], + &source->pads[pad], flags); + if (ret) + break; + + v4l2_info(&fmd->v4l2_dev, "created link [%s] %c> [%s]\n", + source->name, flags ? '=' : '-', sink->name); + + if (flags == 0 || sensor == NULL) + continue; + + if (!WARN_ON(si == NULL)) { + unsigned long irq_flags; + struct fimc_sensor_info *inf = source_to_sensor_info(si); + + spin_lock_irqsave(&fmd->slock, irq_flags); + inf->host = fmd->fimc[i]; + spin_unlock_irqrestore(&fmd->slock, irq_flags); + } + } + + for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { + if (!fmd->fimc_lite[i]) + continue; + + sink = &fmd->fimc_lite[i]->subdev.entity; + ret = media_entity_create_link(source, pad, sink, + FLITE_SD_PAD_SINK, 0); + if (ret) + return ret; + + /* Notify FIMC-LITE subdev entity */ + ret = media_entity_call(sink, link_setup, &sink->pads[0], + &source->pads[pad], 0); + if (ret) + break; + + v4l2_info(&fmd->v4l2_dev, "created link [%s] -> [%s]\n", + source->name, sink->name); + } + return 0; +} + +/* Create links from FIMC-LITE source pads to other entities */ +static int __fimc_md_create_flite_source_links(struct fimc_md *fmd) +{ + struct media_entity *source, *sink; + int i, ret = 0; + + for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { + struct fimc_lite *fimc = fmd->fimc_lite[i]; + + if (fimc == NULL) + continue; + + source = &fimc->subdev.entity; + sink = &fimc->vfd.entity; + /* FIMC-LITE's subdev and video node */ + ret = media_entity_create_link(source, FLITE_SD_PAD_SOURCE_DMA, + sink, 0, 0); + if (ret) + break; + /* Link from FIMC-LITE to IS-ISP subdev */ + sink = &fmd->fimc_is->isp.subdev.entity; + ret = media_entity_create_link(source, FLITE_SD_PAD_SOURCE_ISP, + sink, 0, 0); + if (ret) + break; + } + + return ret; +} + +/* Create FIMC-IS links */ +static int __fimc_md_create_fimc_is_links(struct fimc_md *fmd) +{ + struct media_entity *source, *sink; + int i, ret; + + source = &fmd->fimc_is->isp.subdev.entity; + + for (i = 0; i < FIMC_MAX_DEVS; i++) { + if (fmd->fimc[i] == NULL) + continue; + + /* Link from IS-ISP subdev to FIMC */ + sink = &fmd->fimc[i]->vid_cap.subdev.entity; + ret = media_entity_create_link(source, FIMC_ISP_SD_PAD_SRC_FIFO, + sink, FIMC_SD_PAD_SINK_FIFO, 0); + if (ret) + return ret; + } + + return ret; +} + +/** + * fimc_md_create_links - create default links between registered entities + * + * Parallel interface sensor entities are connected directly to FIMC capture + * entities. The sensors using MIPI CSIS bus are connected through immutable + * link with CSI receiver entity specified by mux_id. Any registered CSIS + * entity has a link to each registered FIMC capture entity. Enabled links + * are created by default between each subsequent registered sensor and + * subsequent FIMC capture entity. The number of default active links is + * determined by the number of available sensors or FIMC entities, + * whichever is less. + */ +static int fimc_md_create_links(struct fimc_md *fmd) +{ + struct v4l2_subdev *csi_sensors[CSIS_MAX_ENTITIES] = { NULL }; + struct v4l2_subdev *sensor, *csis; + struct fimc_source_info *pdata; + struct media_entity *source, *sink; + int i, pad, fimc_id = 0, ret = 0; + u32 flags, link_mask = 0; + + for (i = 0; i < fmd->num_sensors; i++) { + if (fmd->sensor[i].subdev == NULL) + continue; + + sensor = fmd->sensor[i].subdev; + pdata = v4l2_get_subdev_hostdata(sensor); + if (!pdata) + continue; + + source = NULL; + + switch (pdata->sensor_bus_type) { + case FIMC_BUS_TYPE_MIPI_CSI2: + if (WARN(pdata->mux_id >= CSIS_MAX_ENTITIES, + "Wrong CSI channel id: %d\n", pdata->mux_id)) + return -EINVAL; + + csis = fmd->csis[pdata->mux_id].sd; + if (WARN(csis == NULL, + "MIPI-CSI interface specified " + "but s5p-csis module is not loaded!\n")) + return -EINVAL; + + pad = sensor->entity.num_pads - 1; + ret = media_entity_create_link(&sensor->entity, pad, + &csis->entity, CSIS_PAD_SINK, + MEDIA_LNK_FL_IMMUTABLE | + MEDIA_LNK_FL_ENABLED); + if (ret) + return ret; + + v4l2_info(&fmd->v4l2_dev, "created link [%s] => [%s]\n", + sensor->entity.name, csis->entity.name); + + source = NULL; + csi_sensors[pdata->mux_id] = sensor; + break; + + case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656: + source = &sensor->entity; + pad = 0; + break; + + default: + v4l2_err(&fmd->v4l2_dev, "Wrong bus_type: %x\n", + pdata->sensor_bus_type); + return -EINVAL; + } + if (source == NULL) + continue; + + link_mask = 1 << fimc_id++; + ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor, + pad, link_mask); + } + + for (i = 0; i < CSIS_MAX_ENTITIES; i++) { + if (fmd->csis[i].sd == NULL) + continue; + + source = &fmd->csis[i].sd->entity; + pad = CSIS_PAD_SOURCE; + sensor = csi_sensors[i]; + + link_mask = 1 << fimc_id++; + ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor, + pad, link_mask); + } + + /* Create immutable links between each FIMC's subdev and video node */ + flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED; + for (i = 0; i < FIMC_MAX_DEVS; i++) { + if (!fmd->fimc[i]) + continue; + + source = &fmd->fimc[i]->vid_cap.subdev.entity; + sink = &fmd->fimc[i]->vid_cap.vfd.entity; + + ret = media_entity_create_link(source, FIMC_SD_PAD_SOURCE, + sink, 0, flags); + if (ret) + break; + } + + ret = __fimc_md_create_flite_source_links(fmd); + if (ret < 0) + return ret; + + if (fmd->use_isp) + ret = __fimc_md_create_fimc_is_links(fmd); + + return ret; +} + +/* + * The peripheral sensor and CAM_BLK (PIXELASYNCMx) clocks management. + */ +static void fimc_md_put_clocks(struct fimc_md *fmd) +{ + int i = FIMC_MAX_CAMCLKS; + + while (--i >= 0) { + if (IS_ERR(fmd->camclk[i].clock)) + continue; + clk_unprepare(fmd->camclk[i].clock); + clk_put(fmd->camclk[i].clock); + fmd->camclk[i].clock = ERR_PTR(-EINVAL); + } + + /* Writeback (PIXELASYNCMx) clocks */ + for (i = 0; i < FIMC_MAX_WBCLKS; i++) { + if (IS_ERR(fmd->wbclk[i])) + continue; + clk_put(fmd->wbclk[i]); + fmd->wbclk[i] = ERR_PTR(-EINVAL); + } +} + +static int fimc_md_get_clocks(struct fimc_md *fmd) +{ + struct device *dev = NULL; + char clk_name[32]; + struct clk *clock; + int ret, i; + + for (i = 0; i < FIMC_MAX_CAMCLKS; i++) + fmd->camclk[i].clock = ERR_PTR(-EINVAL); + + if (fmd->pdev->dev.of_node) + dev = &fmd->pdev->dev; + + for (i = 0; i < FIMC_MAX_CAMCLKS; i++) { + snprintf(clk_name, sizeof(clk_name), "sclk_cam%u", i); + clock = clk_get(dev, clk_name); + + if (IS_ERR(clock)) { + dev_err(&fmd->pdev->dev, "Failed to get clock: %s\n", + clk_name); + ret = PTR_ERR(clock); + break; + } + ret = clk_prepare(clock); + if (ret < 0) { + clk_put(clock); + fmd->camclk[i].clock = ERR_PTR(-EINVAL); + break; + } + fmd->camclk[i].clock = clock; + } + if (ret) + fimc_md_put_clocks(fmd); + + if (!fmd->use_isp) + return 0; + /* + * For now get only PIXELASYNCM1 clock (Writeback B/ISP), + * leave PIXELASYNCM0 out for the LCD Writeback driver. + */ + fmd->wbclk[CLK_IDX_WB_A] = ERR_PTR(-EINVAL); + + for (i = CLK_IDX_WB_B; i < FIMC_MAX_WBCLKS; i++) { + snprintf(clk_name, sizeof(clk_name), "pxl_async%u", i); + clock = clk_get(dev, clk_name); + if (IS_ERR(clock)) { + v4l2_err(&fmd->v4l2_dev, "Failed to get clock: %s\n", + clk_name); + ret = PTR_ERR(clock); + break; + } + fmd->wbclk[i] = clock; + } + if (ret) + fimc_md_put_clocks(fmd); + + return ret; +} + +static int __fimc_md_set_camclk(struct fimc_md *fmd, + struct fimc_source_info *si, + bool on) +{ + struct fimc_camclk_info *camclk; + int ret = 0; + + if (WARN_ON(si->clk_id >= FIMC_MAX_CAMCLKS) || !fmd || !fmd->pmf) + return -EINVAL; + + camclk = &fmd->camclk[si->clk_id]; + + dbg("camclk %d, f: %lu, use_count: %d, on: %d", + si->clk_id, si->clk_frequency, camclk->use_count, on); + + if (on) { + if (camclk->use_count > 0 && + camclk->frequency != si->clk_frequency) + return -EINVAL; + + if (camclk->use_count++ == 0) { + clk_set_rate(camclk->clock, si->clk_frequency); + camclk->frequency = si->clk_frequency; + ret = pm_runtime_get_sync(fmd->pmf); + if (ret < 0) + return ret; + ret = clk_enable(camclk->clock); + dbg("Enabled camclk %d: f: %lu", si->clk_id, + clk_get_rate(camclk->clock)); + } + return ret; + } + + if (WARN_ON(camclk->use_count == 0)) + return 0; + + if (--camclk->use_count == 0) { + clk_disable(camclk->clock); + pm_runtime_put(fmd->pmf); + dbg("Disabled camclk %d", si->clk_id); + } + return ret; +} + +/** + * fimc_md_set_camclk - peripheral sensor clock setup + * @sd: sensor subdev to configure sclk_cam clock for + * @on: 1 to enable or 0 to disable the clock + * + * There are 2 separate clock outputs available in the SoC for external + * image processors. These clocks are shared between all registered FIMC + * devices to which sensors can be attached, either directly or through + * the MIPI CSI receiver. The clock is allowed here to be used by + * multiple sensors concurrently if they use same frequency. + * This function should only be called when the graph mutex is held. + */ +int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on) +{ + struct fimc_source_info *si = v4l2_get_subdev_hostdata(sd); + struct fimc_md *fmd = entity_to_fimc_mdev(&sd->entity); + + return __fimc_md_set_camclk(fmd, si, on); +} + +static int fimc_md_link_notify(struct media_pad *source, + struct media_pad *sink, u32 flags) +{ + struct fimc_lite *fimc_lite = NULL; + struct fimc_dev *fimc = NULL; + struct fimc_pipeline *pipeline; + struct v4l2_subdev *sd; + struct mutex *lock; + int i, ret = 0; + int ref_count; + + if (media_entity_type(sink->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + return 0; + + sd = media_entity_to_v4l2_subdev(sink->entity); + + switch (sd->grp_id) { + case GRP_ID_FLITE: + fimc_lite = v4l2_get_subdevdata(sd); + if (WARN_ON(fimc_lite == NULL)) + return 0; + pipeline = &fimc_lite->pipeline; + lock = &fimc_lite->lock; + break; + case GRP_ID_FIMC: + fimc = v4l2_get_subdevdata(sd); + if (WARN_ON(fimc == NULL)) + return 0; + pipeline = &fimc->pipeline; + lock = &fimc->lock; + break; + default: + return 0; + } + + mutex_lock(lock); + ref_count = fimc ? fimc->vid_cap.refcnt : fimc_lite->ref_count; + + if (!(flags & MEDIA_LNK_FL_ENABLED)) { + if (ref_count > 0) { + ret = __fimc_pipeline_close(pipeline); + if (!ret && fimc) + fimc_ctrls_delete(fimc->vid_cap.ctx); + } + for (i = 0; i < IDX_MAX; i++) + pipeline->subdevs[i] = NULL; + } else if (ref_count > 0) { + /* + * Link activation. Enable power of pipeline elements only if + * the pipeline is already in use, i.e. its video node is open. + * Recreate the controls destroyed during the link deactivation. + */ + ret = __fimc_pipeline_open(pipeline, + source->entity, true); + if (!ret && fimc) + ret = fimc_capture_ctrls_create(fimc); + } + + mutex_unlock(lock); + return ret ? -EPIPE : ret; +} + +static ssize_t fimc_md_sysfs_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fimc_md *fmd = platform_get_drvdata(pdev); + + if (fmd->user_subdev_api) + return strlcpy(buf, "Sub-device API (sub-dev)\n", PAGE_SIZE); + + return strlcpy(buf, "V4L2 video node only API (vid-dev)\n", PAGE_SIZE); +} + +static ssize_t fimc_md_sysfs_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fimc_md *fmd = platform_get_drvdata(pdev); + bool subdev_api; + int i; + + if (!strcmp(buf, "vid-dev\n")) + subdev_api = false; + else if (!strcmp(buf, "sub-dev\n")) + subdev_api = true; + else + return count; + + fmd->user_subdev_api = subdev_api; + for (i = 0; i < FIMC_MAX_DEVS; i++) + if (fmd->fimc[i]) + fmd->fimc[i]->vid_cap.user_subdev_api = subdev_api; + return count; +} +/* + * This device attribute is to select video pipeline configuration method. + * There are following valid values: + * vid-dev - for V4L2 video node API only, subdevice will be configured + * by the host driver. + * sub-dev - for media controller API, subdevs must be configured in user + * space before starting streaming. + */ +static DEVICE_ATTR(subdev_conf_mode, S_IWUSR | S_IRUGO, + fimc_md_sysfs_show, fimc_md_sysfs_store); + +static int fimc_md_get_pinctrl(struct fimc_md *fmd) +{ + struct device *dev = &fmd->pdev->dev; + struct fimc_pinctrl *pctl = &fmd->pinctl; + + pctl->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(pctl->pinctrl)) + return PTR_ERR(pctl->pinctrl); + + pctl->state_default = pinctrl_lookup_state(pctl->pinctrl, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(pctl->state_default)) + return PTR_ERR(pctl->state_default); + + pctl->state_idle = pinctrl_lookup_state(pctl->pinctrl, + PINCTRL_STATE_IDLE); + return 0; +} + +static int fimc_md_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct v4l2_device *v4l2_dev; + struct fimc_md *fmd; + int ret; + + fmd = devm_kzalloc(dev, sizeof(*fmd), GFP_KERNEL); + if (!fmd) + return -ENOMEM; + + spin_lock_init(&fmd->slock); + fmd->pdev = pdev; + + strlcpy(fmd->media_dev.model, "SAMSUNG S5P FIMC", + sizeof(fmd->media_dev.model)); + fmd->media_dev.link_notify = fimc_md_link_notify; + fmd->media_dev.dev = dev; + + v4l2_dev = &fmd->v4l2_dev; + v4l2_dev->mdev = &fmd->media_dev; + v4l2_dev->notify = fimc_sensor_notify; + strlcpy(v4l2_dev->name, "s5p-fimc-md", sizeof(v4l2_dev->name)); + + fmd->use_isp = fimc_md_is_isp_available(dev->of_node); + + ret = v4l2_device_register(dev, &fmd->v4l2_dev); + if (ret < 0) { + v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret); + return ret; + } + ret = media_device_register(&fmd->media_dev); + if (ret < 0) { + v4l2_err(v4l2_dev, "Failed to register media device: %d\n", ret); + goto err_md; + } + ret = fimc_md_get_clocks(fmd); + if (ret) + goto err_clk; + + fmd->user_subdev_api = (dev->of_node != NULL); + + /* Protect the media graph while we're registering entities */ + mutex_lock(&fmd->media_dev.graph_mutex); + + ret = fimc_md_get_pinctrl(fmd); + if (ret < 0) { + if (ret != EPROBE_DEFER) + dev_err(dev, "Failed to get pinctrl: %d\n", ret); + goto err_unlock; + } + + if (dev->of_node) + ret = fimc_md_register_of_platform_entities(fmd, dev->of_node); + else + ret = bus_for_each_dev(&platform_bus_type, NULL, fmd, + fimc_md_pdev_match); + if (ret) + goto err_unlock; + + if (dev->platform_data || dev->of_node) { + ret = fimc_md_register_sensor_entities(fmd); + if (ret) + goto err_unlock; + } + + ret = fimc_md_create_links(fmd); + if (ret) + goto err_unlock; + ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev); + if (ret) + goto err_unlock; + + ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode); + if (ret) + goto err_unlock; + + platform_set_drvdata(pdev, fmd); + mutex_unlock(&fmd->media_dev.graph_mutex); + return 0; + +err_unlock: + mutex_unlock(&fmd->media_dev.graph_mutex); +err_clk: + fimc_md_put_clocks(fmd); + fimc_md_unregister_entities(fmd); + media_device_unregister(&fmd->media_dev); +err_md: + v4l2_device_unregister(&fmd->v4l2_dev); + return ret; +} + +static int fimc_md_remove(struct platform_device *pdev) +{ + struct fimc_md *fmd = platform_get_drvdata(pdev); + + if (!fmd) + return 0; + device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode); + fimc_md_unregister_entities(fmd); + media_device_unregister(&fmd->media_dev); + fimc_md_put_clocks(fmd); + return 0; +} + +static struct platform_device_id fimc_driver_ids[] __always_unused = { + { .name = "s5p-fimc-md" }, + { }, +}; +MODULE_DEVICE_TABLE(platform, fimc_driver_ids); + +static const struct of_device_id fimc_md_of_match[] = { + { .compatible = "samsung,fimc" }, + { }, +}; +MODULE_DEVICE_TABLE(of, fimc_md_of_match); + +static struct platform_driver fimc_md_driver = { + .probe = fimc_md_probe, + .remove = fimc_md_remove, + .driver = { + .of_match_table = of_match_ptr(fimc_md_of_match), + .name = "s5p-fimc-md", + .owner = THIS_MODULE, + } +}; + +static int __init fimc_md_init(void) +{ + int ret; + + request_module("s5p-csis"); + ret = fimc_register_driver(); + if (ret) + return ret; + + return platform_driver_register(&fimc_md_driver); +} + +static void __exit fimc_md_exit(void) +{ + platform_driver_unregister(&fimc_md_driver); + fimc_unregister_driver(); +} + +module_init(fimc_md_init); +module_exit(fimc_md_exit); + +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_DESCRIPTION("S5P FIMC camera host interface/video postprocessor driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("2.0.1"); diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h new file mode 100644 index 00000000..44d86b61 --- /dev/null +++ b/drivers/media/platform/exynos4-is/media-dev.h @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2011 - 2012 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef FIMC_MDEVICE_H_ +#define FIMC_MDEVICE_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fimc-core.h" +#include "fimc-lite.h" +#include "mipi-csis.h" + +#define FIMC_OF_NODE_NAME "fimc" +#define FIMC_LITE_OF_NODE_NAME "fimc-lite" +#define FIMC_IS_OF_NODE_NAME "fimc-is" +#define CSIS_OF_NODE_NAME "csis" + +#define PINCTRL_STATE_IDLE "idle" + +#define FIMC_MAX_SENSORS 8 +#define FIMC_MAX_CAMCLKS 2 + +/* LCD/ISP Writeback clocks (PIXELASYNCMx) */ +enum { + CLK_IDX_WB_A, + CLK_IDX_WB_B, + FIMC_MAX_WBCLKS +}; + +struct fimc_csis_info { + struct v4l2_subdev *sd; + int id; +}; + +struct fimc_camclk_info { + struct clk *clock; + int use_count; + unsigned long frequency; +}; + +/** + * struct fimc_sensor_info - image data source subdev information + * @pdata: sensor's atrributes passed as media device's platform data + * @subdev: image sensor v4l2 subdev + * @host: fimc device the sensor is currently linked to + * + * This data structure applies to image sensor and the writeback subdevs. + */ +struct fimc_sensor_info { + struct fimc_source_info pdata; + struct v4l2_subdev *subdev; + struct fimc_dev *host; +}; + +/** + * struct fimc_md - fimc media device information + * @csis: MIPI CSIS subdevs data + * @sensor: array of registered sensor subdevs + * @num_sensors: actual number of registered sensors + * @camclk: external sensor clock information + * @fimc: array of registered fimc devices + * @fimc_is: fimc-is data structure + * @use_isp: set to true when FIMC-IS subsystem is used + * @pmf: handle to the CAMCLK clock control FIMC helper device + * @media_dev: top level media device + * @v4l2_dev: top level v4l2_device holding up the subdevs + * @pdev: platform device this media device is hooked up into + * @pinctrl: camera port pinctrl handle + * @state_default: pinctrl default state handle + * @state_idle: pinctrl idle state handle + * @user_subdev_api: true if subdevs are not configured by the host driver + * @slock: spinlock protecting @sensor array + */ +struct fimc_md { + struct fimc_csis_info csis[CSIS_MAX_ENTITIES]; + struct fimc_sensor_info sensor[FIMC_MAX_SENSORS]; + int num_sensors; + struct fimc_camclk_info camclk[FIMC_MAX_CAMCLKS]; + struct clk *wbclk[FIMC_MAX_WBCLKS]; + struct fimc_lite *fimc_lite[FIMC_LITE_MAX_DEVS]; + struct fimc_dev *fimc[FIMC_MAX_DEVS]; + struct fimc_is *fimc_is; + bool use_isp; + struct device *pmf; + struct media_device media_dev; + struct v4l2_device v4l2_dev; + struct platform_device *pdev; + struct fimc_pinctrl { + struct pinctrl *pinctrl; + struct pinctrl_state *state_default; + struct pinctrl_state *state_idle; + } pinctl; + bool user_subdev_api; + spinlock_t slock; +}; + +#define is_subdev_pad(pad) (pad == NULL || \ + media_entity_type(pad->entity) == MEDIA_ENT_T_V4L2_SUBDEV) + +#define me_subtype(me) \ + ((me->type) & (MEDIA_ENT_TYPE_MASK | MEDIA_ENT_SUBTYPE_MASK)) + +#define subdev_has_devnode(__sd) (__sd->flags & V4L2_SUBDEV_FL_HAS_DEVNODE) + +static inline +struct fimc_sensor_info *source_to_sensor_info(struct fimc_source_info *si) +{ + return container_of(si, struct fimc_sensor_info, pdata); +} + +static inline struct fimc_md *entity_to_fimc_mdev(struct media_entity *me) +{ + return me->parent == NULL ? NULL : + container_of(me->parent, struct fimc_md, media_dev); +} + +static inline void fimc_md_graph_lock(struct fimc_dev *fimc) +{ + mutex_lock(&fimc->vid_cap.vfd.entity.parent->graph_mutex); +} + +static inline void fimc_md_graph_unlock(struct fimc_dev *fimc) +{ + mutex_unlock(&fimc->vid_cap.vfd.entity.parent->graph_mutex); +} + +int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on); + +#ifdef CONFIG_OF +static inline bool fimc_md_is_isp_available(struct device_node *node) +{ + node = of_get_child_by_name(node, FIMC_IS_OF_NODE_NAME); + return node ? of_device_is_available(node) : false; +} +#else +#define fimc_md_is_isp_available(node) (false) +#endif /* CONFIG_OF */ + +#endif diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c new file mode 100644 index 00000000..254d70fe --- /dev/null +++ b/drivers/media/platform/exynos4-is/mipi-csis.c @@ -0,0 +1,1019 @@ +/* + * Samsung S5P/EXYNOS4 SoC series MIPI-CSI receiver driver + * + * Copyright (C) 2011 - 2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mipi-csis.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* Register map definition */ + +/* CSIS global control */ +#define S5PCSIS_CTRL 0x00 +#define S5PCSIS_CTRL_DPDN_DEFAULT (0 << 31) +#define S5PCSIS_CTRL_DPDN_SWAP (1 << 31) +#define S5PCSIS_CTRL_ALIGN_32BIT (1 << 20) +#define S5PCSIS_CTRL_UPDATE_SHADOW (1 << 16) +#define S5PCSIS_CTRL_WCLK_EXTCLK (1 << 8) +#define S5PCSIS_CTRL_RESET (1 << 4) +#define S5PCSIS_CTRL_ENABLE (1 << 0) + +/* D-PHY control */ +#define S5PCSIS_DPHYCTRL 0x04 +#define S5PCSIS_DPHYCTRL_HSS_MASK (0x1f << 27) +#define S5PCSIS_DPHYCTRL_ENABLE (0x1f << 0) + +#define S5PCSIS_CONFIG 0x08 +#define S5PCSIS_CFG_FMT_YCBCR422_8BIT (0x1e << 2) +#define S5PCSIS_CFG_FMT_RAW8 (0x2a << 2) +#define S5PCSIS_CFG_FMT_RAW10 (0x2b << 2) +#define S5PCSIS_CFG_FMT_RAW12 (0x2c << 2) +/* User defined formats, x = 1...4 */ +#define S5PCSIS_CFG_FMT_USER(x) ((0x30 + x - 1) << 2) +#define S5PCSIS_CFG_FMT_MASK (0x3f << 2) +#define S5PCSIS_CFG_NR_LANE_MASK 3 + +/* Interrupt mask */ +#define S5PCSIS_INTMSK 0x10 +#define S5PCSIS_INTMSK_EN_ALL 0xf000103f +#define S5PCSIS_INTMSK_EVEN_BEFORE (1 << 31) +#define S5PCSIS_INTMSK_EVEN_AFTER (1 << 30) +#define S5PCSIS_INTMSK_ODD_BEFORE (1 << 29) +#define S5PCSIS_INTMSK_ODD_AFTER (1 << 28) +#define S5PCSIS_INTMSK_ERR_SOT_HS (1 << 12) +#define S5PCSIS_INTMSK_ERR_LOST_FS (1 << 5) +#define S5PCSIS_INTMSK_ERR_LOST_FE (1 << 4) +#define S5PCSIS_INTMSK_ERR_OVER (1 << 3) +#define S5PCSIS_INTMSK_ERR_ECC (1 << 2) +#define S5PCSIS_INTMSK_ERR_CRC (1 << 1) +#define S5PCSIS_INTMSK_ERR_UNKNOWN (1 << 0) + +/* Interrupt source */ +#define S5PCSIS_INTSRC 0x14 +#define S5PCSIS_INTSRC_EVEN_BEFORE (1 << 31) +#define S5PCSIS_INTSRC_EVEN_AFTER (1 << 30) +#define S5PCSIS_INTSRC_EVEN (0x3 << 30) +#define S5PCSIS_INTSRC_ODD_BEFORE (1 << 29) +#define S5PCSIS_INTSRC_ODD_AFTER (1 << 28) +#define S5PCSIS_INTSRC_ODD (0x3 << 28) +#define S5PCSIS_INTSRC_NON_IMAGE_DATA (0xff << 28) +#define S5PCSIS_INTSRC_ERR_SOT_HS (0xf << 12) +#define S5PCSIS_INTSRC_ERR_LOST_FS (1 << 5) +#define S5PCSIS_INTSRC_ERR_LOST_FE (1 << 4) +#define S5PCSIS_INTSRC_ERR_OVER (1 << 3) +#define S5PCSIS_INTSRC_ERR_ECC (1 << 2) +#define S5PCSIS_INTSRC_ERR_CRC (1 << 1) +#define S5PCSIS_INTSRC_ERR_UNKNOWN (1 << 0) +#define S5PCSIS_INTSRC_ERRORS 0xf03f + +/* Pixel resolution */ +#define S5PCSIS_RESOL 0x2c +#define CSIS_MAX_PIX_WIDTH 0xffff +#define CSIS_MAX_PIX_HEIGHT 0xffff + +/* Non-image packet data buffers */ +#define S5PCSIS_PKTDATA_ODD 0x2000 +#define S5PCSIS_PKTDATA_EVEN 0x3000 +#define S5PCSIS_PKTDATA_SIZE SZ_4K + +enum { + CSIS_CLK_MUX, + CSIS_CLK_GATE, +}; + +static char *csi_clock_name[] = { + [CSIS_CLK_MUX] = "sclk_csis", + [CSIS_CLK_GATE] = "csis", +}; +#define NUM_CSIS_CLOCKS ARRAY_SIZE(csi_clock_name) +#define DEFAULT_SCLK_CSIS_FREQ 166000000UL + +static const char * const csis_supply_name[] = { + "vddcore", /* CSIS Core (1.0V, 1.1V or 1.2V) suppply */ + "vddio", /* CSIS I/O and PLL (1.8V) supply */ +}; +#define CSIS_NUM_SUPPLIES ARRAY_SIZE(csis_supply_name) + +enum { + ST_POWERED = 1, + ST_STREAMING = 2, + ST_SUSPENDED = 4, +}; + +struct s5pcsis_event { + u32 mask; + const char * const name; + unsigned int counter; +}; + +static const struct s5pcsis_event s5pcsis_events[] = { + /* Errors */ + { S5PCSIS_INTSRC_ERR_SOT_HS, "SOT Error" }, + { S5PCSIS_INTSRC_ERR_LOST_FS, "Lost Frame Start Error" }, + { S5PCSIS_INTSRC_ERR_LOST_FE, "Lost Frame End Error" }, + { S5PCSIS_INTSRC_ERR_OVER, "FIFO Overflow Error" }, + { S5PCSIS_INTSRC_ERR_ECC, "ECC Error" }, + { S5PCSIS_INTSRC_ERR_CRC, "CRC Error" }, + { S5PCSIS_INTSRC_ERR_UNKNOWN, "Unknown Error" }, + /* Non-image data receive events */ + { S5PCSIS_INTSRC_EVEN_BEFORE, "Non-image data before even frame" }, + { S5PCSIS_INTSRC_EVEN_AFTER, "Non-image data after even frame" }, + { S5PCSIS_INTSRC_ODD_BEFORE, "Non-image data before odd frame" }, + { S5PCSIS_INTSRC_ODD_AFTER, "Non-image data after odd frame" }, +}; +#define S5PCSIS_NUM_EVENTS ARRAY_SIZE(s5pcsis_events) + +struct csis_pktbuf { + u32 *data; + unsigned int len; +}; + +/** + * struct csis_state - the driver's internal state data structure + * @lock: mutex serializing the subdev and power management operations, + * protecting @format and @flags members + * @pads: CSIS pads array + * @sd: v4l2_subdev associated with CSIS device instance + * @index: the hardware instance index + * @pdev: CSIS platform device + * @regs: mmaped I/O registers memory + * @supplies: CSIS regulator supplies + * @clock: CSIS clocks + * @irq: requested s5p-mipi-csis irq number + * @flags: the state variable for power and streaming control + * @clock_frequency: device bus clock frequency + * @hs_settle: HS-RX settle time + * @num_lanes: number of MIPI-CSI data lanes used + * @max_num_lanes: maximum number of MIPI-CSI data lanes supported + * @wclk_ext: CSI wrapper clock: 0 - bus clock, 1 - external SCLK_CAM + * @csis_fmt: current CSIS pixel format + * @format: common media bus format for the source and sink pad + * @slock: spinlock protecting structure members below + * @pkt_buf: the frame embedded (non-image) data buffer + * @events: MIPI-CSIS event (error) counters + */ +struct csis_state { + struct mutex lock; + struct media_pad pads[CSIS_PADS_NUM]; + struct v4l2_subdev sd; + u8 index; + struct platform_device *pdev; + void __iomem *regs; + struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES]; + struct clk *clock[NUM_CSIS_CLOCKS]; + int irq; + u32 flags; + + u32 clk_frequency; + u32 hs_settle; + u32 num_lanes; + u32 max_num_lanes; + u8 wclk_ext; + + const struct csis_pix_format *csis_fmt; + struct v4l2_mbus_framefmt format; + + spinlock_t slock; + struct csis_pktbuf pkt_buf; + struct s5pcsis_event events[S5PCSIS_NUM_EVENTS]; +}; + +/** + * struct csis_pix_format - CSIS pixel format description + * @pix_width_alignment: horizontal pixel alignment, width will be + * multiple of 2^pix_width_alignment + * @code: corresponding media bus code + * @fmt_reg: S5PCSIS_CONFIG register value + * @data_alignment: MIPI-CSI data alignment in bits + */ +struct csis_pix_format { + unsigned int pix_width_alignment; + enum v4l2_mbus_pixelcode code; + u32 fmt_reg; + u8 data_alignment; +}; + +static const struct csis_pix_format s5pcsis_formats[] = { + { + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .fmt_reg = S5PCSIS_CFG_FMT_YCBCR422_8BIT, + .data_alignment = 32, + }, { + .code = V4L2_MBUS_FMT_JPEG_1X8, + .fmt_reg = S5PCSIS_CFG_FMT_USER(1), + .data_alignment = 32, + }, { + .code = V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8, + .fmt_reg = S5PCSIS_CFG_FMT_USER(1), + .data_alignment = 32, + }, { + .code = V4L2_MBUS_FMT_SGRBG8_1X8, + .fmt_reg = S5PCSIS_CFG_FMT_RAW8, + .data_alignment = 24, + }, { + .code = V4L2_MBUS_FMT_SGRBG10_1X10, + .fmt_reg = S5PCSIS_CFG_FMT_RAW10, + .data_alignment = 24, + }, { + .code = V4L2_MBUS_FMT_SGRBG12_1X12, + .fmt_reg = S5PCSIS_CFG_FMT_RAW12, + .data_alignment = 24, + } +}; + +#define s5pcsis_write(__csis, __r, __v) writel(__v, __csis->regs + __r) +#define s5pcsis_read(__csis, __r) readl(__csis->regs + __r) + +static struct csis_state *sd_to_csis_state(struct v4l2_subdev *sdev) +{ + return container_of(sdev, struct csis_state, sd); +} + +static const struct csis_pix_format *find_csis_format( + struct v4l2_mbus_framefmt *mf) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s5pcsis_formats); i++) + if (mf->code == s5pcsis_formats[i].code) + return &s5pcsis_formats[i]; + return NULL; +} + +static void s5pcsis_enable_interrupts(struct csis_state *state, bool on) +{ + u32 val = s5pcsis_read(state, S5PCSIS_INTMSK); + + val = on ? val | S5PCSIS_INTMSK_EN_ALL : + val & ~S5PCSIS_INTMSK_EN_ALL; + s5pcsis_write(state, S5PCSIS_INTMSK, val); +} + +static void s5pcsis_reset(struct csis_state *state) +{ + u32 val = s5pcsis_read(state, S5PCSIS_CTRL); + + s5pcsis_write(state, S5PCSIS_CTRL, val | S5PCSIS_CTRL_RESET); + udelay(10); +} + +static void s5pcsis_system_enable(struct csis_state *state, int on) +{ + u32 val, mask; + + val = s5pcsis_read(state, S5PCSIS_CTRL); + if (on) + val |= S5PCSIS_CTRL_ENABLE; + else + val &= ~S5PCSIS_CTRL_ENABLE; + s5pcsis_write(state, S5PCSIS_CTRL, val); + + val = s5pcsis_read(state, S5PCSIS_DPHYCTRL); + val &= ~S5PCSIS_DPHYCTRL_ENABLE; + if (on) { + mask = (1 << (state->num_lanes + 1)) - 1; + val |= (mask & S5PCSIS_DPHYCTRL_ENABLE); + } + s5pcsis_write(state, S5PCSIS_DPHYCTRL, val); +} + +/* Called with the state.lock mutex held */ +static void __s5pcsis_set_format(struct csis_state *state) +{ + struct v4l2_mbus_framefmt *mf = &state->format; + u32 val; + + v4l2_dbg(1, debug, &state->sd, "fmt: %#x, %d x %d\n", + mf->code, mf->width, mf->height); + + /* Color format */ + val = s5pcsis_read(state, S5PCSIS_CONFIG); + val = (val & ~S5PCSIS_CFG_FMT_MASK) | state->csis_fmt->fmt_reg; + s5pcsis_write(state, S5PCSIS_CONFIG, val); + + /* Pixel resolution */ + val = (mf->width << 16) | mf->height; + s5pcsis_write(state, S5PCSIS_RESOL, val); +} + +static void s5pcsis_set_hsync_settle(struct csis_state *state, int settle) +{ + u32 val = s5pcsis_read(state, S5PCSIS_DPHYCTRL); + + val = (val & ~S5PCSIS_DPHYCTRL_HSS_MASK) | (settle << 27); + s5pcsis_write(state, S5PCSIS_DPHYCTRL, val); +} + +static void s5pcsis_set_params(struct csis_state *state) +{ + u32 val; + + val = s5pcsis_read(state, S5PCSIS_CONFIG); + val = (val & ~S5PCSIS_CFG_NR_LANE_MASK) | (state->num_lanes - 1); + s5pcsis_write(state, S5PCSIS_CONFIG, val); + + __s5pcsis_set_format(state); + s5pcsis_set_hsync_settle(state, state->hs_settle); + + val = s5pcsis_read(state, S5PCSIS_CTRL); + if (state->csis_fmt->data_alignment == 32) + val |= S5PCSIS_CTRL_ALIGN_32BIT; + else /* 24-bits */ + val &= ~S5PCSIS_CTRL_ALIGN_32BIT; + + val &= ~S5PCSIS_CTRL_WCLK_EXTCLK; + if (state->wclk_ext) + val |= S5PCSIS_CTRL_WCLK_EXTCLK; + s5pcsis_write(state, S5PCSIS_CTRL, val); + + /* Update the shadow register. */ + val = s5pcsis_read(state, S5PCSIS_CTRL); + s5pcsis_write(state, S5PCSIS_CTRL, val | S5PCSIS_CTRL_UPDATE_SHADOW); +} + +static void s5pcsis_clk_put(struct csis_state *state) +{ + int i; + + for (i = 0; i < NUM_CSIS_CLOCKS; i++) { + if (IS_ERR(state->clock[i])) + continue; + clk_unprepare(state->clock[i]); + clk_put(state->clock[i]); + state->clock[i] = ERR_PTR(-EINVAL); + } +} + +static int s5pcsis_clk_get(struct csis_state *state) +{ + struct device *dev = &state->pdev->dev; + int i, ret; + + for (i = 0; i < NUM_CSIS_CLOCKS; i++) + state->clock[i] = ERR_PTR(-EINVAL); + + for (i = 0; i < NUM_CSIS_CLOCKS; i++) { + state->clock[i] = clk_get(dev, csi_clock_name[i]); + if (IS_ERR(state->clock[i])) { + ret = PTR_ERR(state->clock[i]); + goto err; + } + ret = clk_prepare(state->clock[i]); + if (ret < 0) { + clk_put(state->clock[i]); + state->clock[i] = ERR_PTR(-EINVAL); + goto err; + } + } + return 0; +err: + s5pcsis_clk_put(state); + dev_err(dev, "failed to get clock: %s\n", csi_clock_name[i]); + return ret; +} + +static void dump_regs(struct csis_state *state, const char *label) +{ + struct { + u32 offset; + const char * const name; + } registers[] = { + { 0x00, "CTRL" }, + { 0x04, "DPHYCTRL" }, + { 0x08, "CONFIG" }, + { 0x0c, "DPHYSTS" }, + { 0x10, "INTMSK" }, + { 0x2c, "RESOL" }, + { 0x38, "SDW_CONFIG" }, + }; + u32 i; + + v4l2_info(&state->sd, "--- %s ---\n", label); + + for (i = 0; i < ARRAY_SIZE(registers); i++) { + u32 cfg = s5pcsis_read(state, registers[i].offset); + v4l2_info(&state->sd, "%10s: 0x%08x\n", registers[i].name, cfg); + } +} + +static void s5pcsis_start_stream(struct csis_state *state) +{ + s5pcsis_reset(state); + s5pcsis_set_params(state); + s5pcsis_system_enable(state, true); + s5pcsis_enable_interrupts(state, true); +} + +static void s5pcsis_stop_stream(struct csis_state *state) +{ + s5pcsis_enable_interrupts(state, false); + s5pcsis_system_enable(state, false); +} + +static void s5pcsis_clear_counters(struct csis_state *state) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&state->slock, flags); + for (i = 0; i < S5PCSIS_NUM_EVENTS; i++) + state->events[i].counter = 0; + spin_unlock_irqrestore(&state->slock, flags); +} + +static void s5pcsis_log_counters(struct csis_state *state, bool non_errors) +{ + int i = non_errors ? S5PCSIS_NUM_EVENTS : S5PCSIS_NUM_EVENTS - 4; + unsigned long flags; + + spin_lock_irqsave(&state->slock, flags); + + for (i--; i >= 0; i--) { + if (state->events[i].counter > 0 || debug) + v4l2_info(&state->sd, "%s events: %d\n", + state->events[i].name, + state->events[i].counter); + } + spin_unlock_irqrestore(&state->slock, flags); +} + +/* + * V4L2 subdev operations + */ +static int s5pcsis_s_power(struct v4l2_subdev *sd, int on) +{ + struct csis_state *state = sd_to_csis_state(sd); + struct device *dev = &state->pdev->dev; + + if (on) + return pm_runtime_get_sync(dev); + + return pm_runtime_put_sync(dev); +} + +static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct csis_state *state = sd_to_csis_state(sd); + int ret = 0; + + v4l2_dbg(1, debug, sd, "%s: %d, state: 0x%x\n", + __func__, enable, state->flags); + + if (enable) { + s5pcsis_clear_counters(state); + ret = pm_runtime_get_sync(&state->pdev->dev); + if (ret && ret != 1) + return ret; + } + + mutex_lock(&state->lock); + if (enable) { + if (state->flags & ST_SUSPENDED) { + ret = -EBUSY; + goto unlock; + } + s5pcsis_start_stream(state); + state->flags |= ST_STREAMING; + } else { + s5pcsis_stop_stream(state); + state->flags &= ~ST_STREAMING; + if (debug > 0) + s5pcsis_log_counters(state, true); + } +unlock: + mutex_unlock(&state->lock); + if (!enable) + pm_runtime_put(&state->pdev->dev); + + return ret == 1 ? 0 : ret; +} + +static int s5pcsis_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(s5pcsis_formats)) + return -EINVAL; + + code->code = s5pcsis_formats[code->index].code; + return 0; +} + +static struct csis_pix_format const *s5pcsis_try_format( + struct v4l2_mbus_framefmt *mf) +{ + struct csis_pix_format const *csis_fmt; + + csis_fmt = find_csis_format(mf); + if (csis_fmt == NULL) + csis_fmt = &s5pcsis_formats[0]; + + mf->code = csis_fmt->code; + v4l_bound_align_image(&mf->width, 1, CSIS_MAX_PIX_WIDTH, + csis_fmt->pix_width_alignment, + &mf->height, 1, CSIS_MAX_PIX_HEIGHT, 1, + 0); + return csis_fmt; +} + +static struct v4l2_mbus_framefmt *__s5pcsis_get_format( + struct csis_state *state, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return fh ? v4l2_subdev_get_try_format(fh, 0) : NULL; + + return &state->format; +} + +static int s5pcsis_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct csis_state *state = sd_to_csis_state(sd); + struct csis_pix_format const *csis_fmt; + struct v4l2_mbus_framefmt *mf; + + mf = __s5pcsis_get_format(state, fh, fmt->which); + + if (fmt->pad == CSIS_PAD_SOURCE) { + if (mf) { + mutex_lock(&state->lock); + fmt->format = *mf; + mutex_unlock(&state->lock); + } + return 0; + } + csis_fmt = s5pcsis_try_format(&fmt->format); + if (mf) { + mutex_lock(&state->lock); + *mf = fmt->format; + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + state->csis_fmt = csis_fmt; + mutex_unlock(&state->lock); + } + return 0; +} + +static int s5pcsis_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct csis_state *state = sd_to_csis_state(sd); + struct v4l2_mbus_framefmt *mf; + + mf = __s5pcsis_get_format(state, fh, fmt->which); + if (!mf) + return -EINVAL; + + mutex_lock(&state->lock); + fmt->format = *mf; + mutex_unlock(&state->lock); + return 0; +} + +static int s5pcsis_s_rx_buffer(struct v4l2_subdev *sd, void *buf, + unsigned int *size) +{ + struct csis_state *state = sd_to_csis_state(sd); + unsigned long flags; + + *size = min_t(unsigned int, *size, S5PCSIS_PKTDATA_SIZE); + + spin_lock_irqsave(&state->slock, flags); + state->pkt_buf.data = buf; + state->pkt_buf.len = *size; + spin_unlock_irqrestore(&state->slock, flags); + + return 0; +} + +static int s5pcsis_log_status(struct v4l2_subdev *sd) +{ + struct csis_state *state = sd_to_csis_state(sd); + + mutex_lock(&state->lock); + s5pcsis_log_counters(state, true); + if (debug && (state->flags & ST_POWERED)) + dump_regs(state, __func__); + mutex_unlock(&state->lock); + return 0; +} + +static int s5pcsis_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); + + format->colorspace = V4L2_COLORSPACE_JPEG; + format->code = s5pcsis_formats[0].code; + format->width = S5PCSIS_DEF_PIX_WIDTH; + format->height = S5PCSIS_DEF_PIX_HEIGHT; + format->field = V4L2_FIELD_NONE; + + return 0; +} + +static const struct v4l2_subdev_internal_ops s5pcsis_sd_internal_ops = { + .open = s5pcsis_open, +}; + +static struct v4l2_subdev_core_ops s5pcsis_core_ops = { + .s_power = s5pcsis_s_power, + .log_status = s5pcsis_log_status, +}; + +static struct v4l2_subdev_pad_ops s5pcsis_pad_ops = { + .enum_mbus_code = s5pcsis_enum_mbus_code, + .get_fmt = s5pcsis_get_fmt, + .set_fmt = s5pcsis_set_fmt, +}; + +static struct v4l2_subdev_video_ops s5pcsis_video_ops = { + .s_rx_buffer = s5pcsis_s_rx_buffer, + .s_stream = s5pcsis_s_stream, +}; + +static struct v4l2_subdev_ops s5pcsis_subdev_ops = { + .core = &s5pcsis_core_ops, + .pad = &s5pcsis_pad_ops, + .video = &s5pcsis_video_ops, +}; + +static irqreturn_t s5pcsis_irq_handler(int irq, void *dev_id) +{ + struct csis_state *state = dev_id; + struct csis_pktbuf *pktbuf = &state->pkt_buf; + unsigned long flags; + u32 status; + + status = s5pcsis_read(state, S5PCSIS_INTSRC); + spin_lock_irqsave(&state->slock, flags); + + if ((status & S5PCSIS_INTSRC_NON_IMAGE_DATA) && pktbuf->data) { + u32 offset; + + if (status & S5PCSIS_INTSRC_EVEN) + offset = S5PCSIS_PKTDATA_EVEN; + else + offset = S5PCSIS_PKTDATA_ODD; + + memcpy(pktbuf->data, state->regs + offset, pktbuf->len); + pktbuf->data = NULL; + rmb(); + } + + /* Update the event/error counters */ + if ((status & S5PCSIS_INTSRC_ERRORS) || debug) { + int i; + for (i = 0; i < S5PCSIS_NUM_EVENTS; i++) { + if (!(status & state->events[i].mask)) + continue; + state->events[i].counter++; + v4l2_dbg(2, debug, &state->sd, "%s: %d\n", + state->events[i].name, + state->events[i].counter); + } + v4l2_dbg(2, debug, &state->sd, "status: %08x\n", status); + } + spin_unlock_irqrestore(&state->slock, flags); + + s5pcsis_write(state, S5PCSIS_INTSRC, status); + return IRQ_HANDLED; +} + +static int s5pcsis_get_platform_data(struct platform_device *pdev, + struct csis_state *state) +{ + struct s5p_platform_mipi_csis *pdata = pdev->dev.platform_data; + + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform data not specified\n"); + return -EINVAL; + } + + state->clk_frequency = pdata->clk_rate; + state->num_lanes = pdata->lanes; + state->hs_settle = pdata->hs_settle; + state->index = max(0, pdev->id); + state->max_num_lanes = state->index ? CSIS1_MAX_LANES : + CSIS0_MAX_LANES; + return 0; +} + +#ifdef CONFIG_OF +static int s5pcsis_parse_dt(struct platform_device *pdev, + struct csis_state *state) +{ + struct device_node *node = pdev->dev.of_node; + struct v4l2_of_endpoint endpoint; + + if (of_property_read_u32(node, "clock-frequency", + &state->clk_frequency)) + state->clk_frequency = DEFAULT_SCLK_CSIS_FREQ; + if (of_property_read_u32(node, "bus-width", + &state->max_num_lanes)) + return -EINVAL; + + node = v4l2_of_get_next_endpoint(node, NULL); + if (!node) { + dev_err(&pdev->dev, "No port node at %s\n", + pdev->dev.of_node->full_name); + return -EINVAL; + } + /* Get port node and validate MIPI-CSI channel id. */ + v4l2_of_parse_endpoint(node, &endpoint); + + state->index = endpoint.port - FIMC_INPUT_MIPI_CSI2_0; + if (state->index < 0 || state->index >= CSIS_MAX_ENTITIES) + return -ENXIO; + + /* Get MIPI CSI-2 bus configration from the endpoint node. */ + of_property_read_u32(node, "samsung,csis-hs-settle", + &state->hs_settle); + state->wclk_ext = of_property_read_bool(node, + "samsung,csis-wclk"); + + state->num_lanes = endpoint.bus.mipi_csi2.num_data_lanes; + + of_node_put(node); + return 0; +} +#else +#define s5pcsis_parse_dt(pdev, state) (-ENOSYS) +#endif + +static int s5pcsis_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *mem_res; + struct csis_state *state; + int ret = -ENOMEM; + int i; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + mutex_init(&state->lock); + spin_lock_init(&state->slock); + state->pdev = pdev; + + if (dev->of_node) + ret = s5pcsis_parse_dt(pdev, state); + else + ret = s5pcsis_get_platform_data(pdev, state); + if (ret < 0) + return ret; + + if (state->num_lanes == 0 || state->num_lanes > state->max_num_lanes) { + dev_err(dev, "Unsupported number of data lanes: %d (max. %d)\n", + state->num_lanes, state->max_num_lanes); + return -EINVAL; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + state->regs = devm_ioremap_resource(dev, mem_res); + if (IS_ERR(state->regs)) + return PTR_ERR(state->regs); + + state->irq = platform_get_irq(pdev, 0); + if (state->irq < 0) { + dev_err(dev, "Failed to get irq\n"); + return state->irq; + } + + for (i = 0; i < CSIS_NUM_SUPPLIES; i++) + state->supplies[i].supply = csis_supply_name[i]; + + ret = devm_regulator_bulk_get(dev, CSIS_NUM_SUPPLIES, + state->supplies); + if (ret) + return ret; + + ret = s5pcsis_clk_get(state); + if (ret < 0) + return ret; + + if (state->clk_frequency) + ret = clk_set_rate(state->clock[CSIS_CLK_MUX], + state->clk_frequency); + else + dev_WARN(dev, "No clock frequency specified!\n"); + if (ret < 0) + goto e_clkput; + + ret = clk_enable(state->clock[CSIS_CLK_MUX]); + if (ret < 0) + goto e_clkput; + + ret = devm_request_irq(dev, state->irq, s5pcsis_irq_handler, + 0, dev_name(dev), state); + if (ret) { + dev_err(dev, "Interrupt request failed\n"); + goto e_clkdis; + } + + v4l2_subdev_init(&state->sd, &s5pcsis_subdev_ops); + state->sd.owner = THIS_MODULE; + snprintf(state->sd.name, sizeof(state->sd.name), "%s.%d", + CSIS_SUBDEV_NAME, state->index); + state->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + state->csis_fmt = &s5pcsis_formats[0]; + + state->format.code = s5pcsis_formats[0].code; + state->format.width = S5PCSIS_DEF_PIX_WIDTH; + state->format.height = S5PCSIS_DEF_PIX_HEIGHT; + + state->pads[CSIS_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + state->pads[CSIS_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&state->sd.entity, + CSIS_PADS_NUM, state->pads, 0); + if (ret < 0) + goto e_clkdis; + + /* This allows to retrieve the platform device id by the host driver */ + v4l2_set_subdevdata(&state->sd, pdev); + + /* .. and a pointer to the subdev. */ + platform_set_drvdata(pdev, &state->sd); + memcpy(state->events, s5pcsis_events, sizeof(state->events)); + pm_runtime_enable(dev); + + dev_info(&pdev->dev, "lanes: %d, hs_settle: %d, wclk: %d, freq: %u\n", + state->num_lanes, state->hs_settle, state->wclk_ext, + state->clk_frequency); + return 0; + +e_clkdis: + clk_disable(state->clock[CSIS_CLK_MUX]); +e_clkput: + s5pcsis_clk_put(state); + return ret; +} + +static int s5pcsis_pm_suspend(struct device *dev, bool runtime) +{ + struct platform_device *pdev = to_platform_device(dev); + struct v4l2_subdev *sd = platform_get_drvdata(pdev); + struct csis_state *state = sd_to_csis_state(sd); + int ret = 0; + + v4l2_dbg(1, debug, sd, "%s: flags: 0x%x\n", + __func__, state->flags); + + mutex_lock(&state->lock); + if (state->flags & ST_POWERED) { + s5pcsis_stop_stream(state); + ret = s5p_csis_phy_enable(state->index, false); + if (ret) + goto unlock; + ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES, + state->supplies); + if (ret) + goto unlock; + clk_disable(state->clock[CSIS_CLK_GATE]); + state->flags &= ~ST_POWERED; + if (!runtime) + state->flags |= ST_SUSPENDED; + } + unlock: + mutex_unlock(&state->lock); + return ret ? -EAGAIN : 0; +} + +static int s5pcsis_pm_resume(struct device *dev, bool runtime) +{ + struct platform_device *pdev = to_platform_device(dev); + struct v4l2_subdev *sd = platform_get_drvdata(pdev); + struct csis_state *state = sd_to_csis_state(sd); + int ret = 0; + + v4l2_dbg(1, debug, sd, "%s: flags: 0x%x\n", + __func__, state->flags); + + mutex_lock(&state->lock); + if (!runtime && !(state->flags & ST_SUSPENDED)) + goto unlock; + + if (!(state->flags & ST_POWERED)) { + ret = regulator_bulk_enable(CSIS_NUM_SUPPLIES, + state->supplies); + if (ret) + goto unlock; + ret = s5p_csis_phy_enable(state->index, true); + if (!ret) { + state->flags |= ST_POWERED; + } else { + regulator_bulk_disable(CSIS_NUM_SUPPLIES, + state->supplies); + goto unlock; + } + clk_enable(state->clock[CSIS_CLK_GATE]); + } + if (state->flags & ST_STREAMING) + s5pcsis_start_stream(state); + + state->flags &= ~ST_SUSPENDED; + unlock: + mutex_unlock(&state->lock); + return ret ? -EAGAIN : 0; +} + +#ifdef CONFIG_PM_SLEEP +static int s5pcsis_suspend(struct device *dev) +{ + return s5pcsis_pm_suspend(dev, false); +} + +static int s5pcsis_resume(struct device *dev) +{ + return s5pcsis_pm_resume(dev, false); +} +#endif + +#ifdef CONFIG_PM_RUNTIME +static int s5pcsis_runtime_suspend(struct device *dev) +{ + return s5pcsis_pm_suspend(dev, true); +} + +static int s5pcsis_runtime_resume(struct device *dev) +{ + return s5pcsis_pm_resume(dev, true); +} +#endif + +static int s5pcsis_remove(struct platform_device *pdev) +{ + struct v4l2_subdev *sd = platform_get_drvdata(pdev); + struct csis_state *state = sd_to_csis_state(sd); + + pm_runtime_disable(&pdev->dev); + s5pcsis_pm_suspend(&pdev->dev, false); + clk_disable(state->clock[CSIS_CLK_MUX]); + pm_runtime_set_suspended(&pdev->dev); + s5pcsis_clk_put(state); + + media_entity_cleanup(&state->sd.entity); + + return 0; +} + +static const struct dev_pm_ops s5pcsis_pm_ops = { + SET_RUNTIME_PM_OPS(s5pcsis_runtime_suspend, s5pcsis_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(s5pcsis_suspend, s5pcsis_resume) +}; + +static const struct of_device_id s5pcsis_of_match[] = { + { .compatible = "samsung,s5pv210-csis" }, + { .compatible = "samsung,exynos4210-csis" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, s5pcsis_of_match); + +static struct platform_driver s5pcsis_driver = { + .probe = s5pcsis_probe, + .remove = s5pcsis_remove, + .driver = { + .of_match_table = s5pcsis_of_match, + .name = CSIS_DRIVER_NAME, + .owner = THIS_MODULE, + .pm = &s5pcsis_pm_ops, + }, +}; + +module_platform_driver(s5pcsis_driver); + +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI-CSI2 receiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/exynos4-is/mipi-csis.h b/drivers/media/platform/exynos4-is/mipi-csis.h new file mode 100644 index 00000000..28c11c40 --- /dev/null +++ b/drivers/media/platform/exynos4-is/mipi-csis.h @@ -0,0 +1,26 @@ +/* + * Samsung S5P/EXYNOS4 SoC series MIPI-CSI receiver driver + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef S5P_MIPI_CSIS_H_ +#define S5P_MIPI_CSIS_H_ + +#define CSIS_DRIVER_NAME "s5p-mipi-csis" +#define CSIS_SUBDEV_NAME CSIS_DRIVER_NAME +#define CSIS_MAX_ENTITIES 2 +#define CSIS0_MAX_LANES 4 +#define CSIS1_MAX_LANES 2 + +#define CSIS_PAD_SINK 0 +#define CSIS_PAD_SOURCE 1 +#define CSIS_PADS_NUM 2 + +#define S5PCSIS_DEF_PIX_WIDTH 640 +#define S5PCSIS_DEF_PIX_HEIGHT 480 + +#endif diff --git a/drivers/media/platform/fsl-viu.c b/drivers/media/platform/fsl-viu.c new file mode 100644 index 00000000..3a6a0dcd --- /dev/null +++ b/drivers/media/platform/fsl-viu.c @@ -0,0 +1,1688 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Freescale VIU video driver + * + * Authors: Hongjun Chen + * Porting to 2.6.35 by DENX Software Engineering, + * Anatolij Gustschin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "fsl_viu" +#define VIU_VERSION "0.5.1" + +#define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ + +#define VIU_VID_MEM_LIMIT 4 /* Video memory limit, in Mb */ + +/* I2C address of video decoder chip is 0x4A */ +#define VIU_VIDEO_DECODER_ADDR 0x25 + +/* supported controls */ +static struct v4l2_queryctrl viu_qctrl[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 127, + .flags = 0, + }, { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 0x10, + .flags = 0, + }, { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 127, + .flags = 0, + }, { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = -128, + .maximum = 127, + .step = 0x1, + .default_value = 0, + .flags = 0, + } +}; + +static int qctl_regs[ARRAY_SIZE(viu_qctrl)]; + +static int info_level; + +#define dprintk(level, fmt, arg...) \ + do { \ + if (level <= info_level) \ + printk(KERN_DEBUG "viu: " fmt , ## arg); \ + } while (0) + +/* + * Basic structures + */ +struct viu_fmt { + char name[32]; + u32 fourcc; /* v4l2 format id */ + u32 pixelformat; + int depth; +}; + +static struct viu_fmt formats[] = { + { + .name = "RGB-16 (5/B-6/G-5/R)", + .fourcc = V4L2_PIX_FMT_RGB565, + .pixelformat = V4L2_PIX_FMT_RGB565, + .depth = 16, + }, { + .name = "RGB-32 (A-R-G-B)", + .fourcc = V4L2_PIX_FMT_RGB32, + .pixelformat = V4L2_PIX_FMT_RGB32, + .depth = 32, + } +}; + +struct viu_dev; +struct viu_buf; + +/* buffer for one video frame */ +struct viu_buf { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + struct viu_fmt *fmt; +}; + +struct viu_dmaqueue { + struct viu_dev *dev; + struct list_head active; + struct list_head queued; + struct timer_list timeout; +}; + +struct viu_status { + u32 field_irq; + u32 vsync_irq; + u32 hsync_irq; + u32 vstart_irq; + u32 dma_end_irq; + u32 error_irq; +}; + +struct viu_reg { + u32 status_cfg; + u32 luminance; + u32 chroma_r; + u32 chroma_g; + u32 chroma_b; + u32 field_base_addr; + u32 dma_inc; + u32 picture_count; + u32 req_alarm; + u32 alpha; +} __attribute__ ((packed)); + +struct viu_dev { + struct v4l2_device v4l2_dev; + struct mutex lock; + spinlock_t slock; + int users; + + struct device *dev; + /* various device info */ + struct video_device *vdev; + struct viu_dmaqueue vidq; + enum v4l2_field capfield; + int field; + int first; + int dma_done; + + /* Hardware register area */ + struct viu_reg *vr; + + /* Interrupt vector */ + int irq; + struct viu_status irqs; + + /* video overlay */ + struct v4l2_framebuffer ovbuf; + struct viu_fmt *ovfmt; + unsigned int ovenable; + enum v4l2_field ovfield; + + /* crop */ + struct v4l2_rect crop_current; + + /* clock pointer */ + struct clk *clk; + + /* decoder */ + struct v4l2_subdev *decoder; + + v4l2_std_id std; +}; + +struct viu_fh { + struct viu_dev *dev; + + /* video capture */ + struct videobuf_queue vb_vidq; + spinlock_t vbq_lock; /* spinlock for the videobuf queue */ + + /* video overlay */ + struct v4l2_window win; + struct v4l2_clip clips[1]; + + /* video capture */ + struct viu_fmt *fmt; + int width, height, sizeimage; + enum v4l2_buf_type type; +}; + +static struct viu_reg reg_val; + +/* + * Macro definitions of VIU registers + */ + +/* STATUS_CONFIG register */ +enum status_config { + SOFT_RST = 1 << 0, + + ERR_MASK = 0x0f << 4, /* Error code mask */ + ERR_NO = 0x00, /* No error */ + ERR_DMA_V = 0x01 << 4, /* DMA in vertical active */ + ERR_DMA_VB = 0x02 << 4, /* DMA in vertical blanking */ + ERR_LINE_TOO_LONG = 0x04 << 4, /* Line too long */ + ERR_TOO_MANG_LINES = 0x05 << 4, /* Too many lines in field */ + ERR_LINE_TOO_SHORT = 0x06 << 4, /* Line too short */ + ERR_NOT_ENOUGH_LINE = 0x07 << 4, /* Not enough lines in field */ + ERR_FIFO_OVERFLOW = 0x08 << 4, /* FIFO overflow */ + ERR_FIFO_UNDERFLOW = 0x09 << 4, /* FIFO underflow */ + ERR_1bit_ECC = 0x0a << 4, /* One bit ECC error */ + ERR_MORE_ECC = 0x0b << 4, /* Two/more bits ECC error */ + + INT_FIELD_EN = 0x01 << 8, /* Enable field interrupt */ + INT_VSYNC_EN = 0x01 << 9, /* Enable vsync interrupt */ + INT_HSYNC_EN = 0x01 << 10, /* Enable hsync interrupt */ + INT_VSTART_EN = 0x01 << 11, /* Enable vstart interrupt */ + INT_DMA_END_EN = 0x01 << 12, /* Enable DMA end interrupt */ + INT_ERROR_EN = 0x01 << 13, /* Enable error interrupt */ + INT_ECC_EN = 0x01 << 14, /* Enable ECC interrupt */ + + INT_FIELD_STATUS = 0x01 << 16, /* field interrupt status */ + INT_VSYNC_STATUS = 0x01 << 17, /* vsync interrupt status */ + INT_HSYNC_STATUS = 0x01 << 18, /* hsync interrupt status */ + INT_VSTART_STATUS = 0x01 << 19, /* vstart interrupt status */ + INT_DMA_END_STATUS = 0x01 << 20, /* DMA end interrupt status */ + INT_ERROR_STATUS = 0x01 << 21, /* error interrupt status */ + + DMA_ACT = 0x01 << 27, /* Enable DMA transfer */ + FIELD_NO = 0x01 << 28, /* Field number */ + DITHER_ON = 0x01 << 29, /* Dithering is on */ + ROUND_ON = 0x01 << 30, /* Round is on */ + MODE_32BIT = 0x01 << 31, /* Data in RGBa888, + * 0 in RGB565 + */ +}; + +#define norm_maxw() 720 +#define norm_maxh() 576 + +#define INT_ALL_STATUS (INT_FIELD_STATUS | INT_VSYNC_STATUS | \ + INT_HSYNC_STATUS | INT_VSTART_STATUS | \ + INT_DMA_END_STATUS | INT_ERROR_STATUS) + +#define NUM_FORMATS ARRAY_SIZE(formats) + +static irqreturn_t viu_intr(int irq, void *dev_id); + +struct viu_fmt *format_by_fourcc(int fourcc) +{ + int i; + + for (i = 0; i < NUM_FORMATS; i++) { + if (formats[i].pixelformat == fourcc) + return formats + i; + } + + dprintk(0, "unknown pixelformat:'%4.4s'\n", (char *)&fourcc); + return NULL; +} + +void viu_start_dma(struct viu_dev *dev) +{ + struct viu_reg *vr = dev->vr; + + dev->field = 0; + + /* Enable DMA operation */ + out_be32(&vr->status_cfg, SOFT_RST); + out_be32(&vr->status_cfg, INT_FIELD_EN); +} + +void viu_stop_dma(struct viu_dev *dev) +{ + struct viu_reg *vr = dev->vr; + int cnt = 100; + u32 status_cfg; + + out_be32(&vr->status_cfg, 0); + + /* Clear pending interrupts */ + status_cfg = in_be32(&vr->status_cfg); + if (status_cfg & 0x3f0000) + out_be32(&vr->status_cfg, status_cfg & 0x3f0000); + + if (status_cfg & DMA_ACT) { + do { + status_cfg = in_be32(&vr->status_cfg); + if (status_cfg & INT_DMA_END_STATUS) + break; + } while (cnt--); + + if (cnt < 0) { + /* timed out, issue soft reset */ + out_be32(&vr->status_cfg, SOFT_RST); + out_be32(&vr->status_cfg, 0); + } else { + /* clear DMA_END and other pending irqs */ + out_be32(&vr->status_cfg, status_cfg & 0x3f0000); + } + } + + dev->field = 0; +} + +static int restart_video_queue(struct viu_dmaqueue *vidq) +{ + struct viu_buf *buf, *prev; + + dprintk(1, "%s vidq=0x%08lx\n", __func__, (unsigned long)vidq); + if (!list_empty(&vidq->active)) { + buf = list_entry(vidq->active.next, struct viu_buf, vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + + viu_stop_dma(vidq->dev); + + /* cancel all outstanding capture requests */ + list_for_each_entry_safe(buf, prev, &vidq->active, vb.queue) { + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + } + mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); + return 0; + } + + prev = NULL; + for (;;) { + if (list_empty(&vidq->queued)) + return 0; + buf = list_entry(vidq->queued.next, struct viu_buf, vb.queue); + if (prev == NULL) { + list_move_tail(&buf->vb.queue, &vidq->active); + + dprintk(1, "Restarting video dma\n"); + viu_stop_dma(vidq->dev); + viu_start_dma(vidq->dev); + + buf->vb.state = VIDEOBUF_ACTIVE; + mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] restart_queue - first active\n", + buf, buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_move_tail(&buf->vb.queue, &vidq->active); + buf->vb.state = VIDEOBUF_ACTIVE; + dprintk(2, "[%p/%d] restart_queue - move to active\n", + buf, buf->vb.i); + } else { + return 0; + } + prev = buf; + } +} + +static void viu_vid_timeout(unsigned long data) +{ + struct viu_dev *dev = (struct viu_dev *)data; + struct viu_buf *buf; + struct viu_dmaqueue *vidq = &dev->vidq; + + while (!list_empty(&vidq->active)) { + buf = list_entry(vidq->active.next, struct viu_buf, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + dprintk(1, "viu/0: [%p/%d] timeout\n", buf, buf->vb.i); + } + + restart_video_queue(vidq); +} + +/* + * Videobuf operations + */ +static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, + unsigned int *size) +{ + struct viu_fh *fh = vq->priv_data; + + *size = fh->width * fh->height * fh->fmt->depth >> 3; + if (*count == 0) + *count = 32; + + while (*size * *count > VIU_VID_MEM_LIMIT * 1024 * 1024) + (*count)--; + + dprintk(1, "%s, count=%d, size=%d\n", __func__, *count, *size); + return 0; +} + +static void free_buffer(struct videobuf_queue *vq, struct viu_buf *buf) +{ + struct videobuf_buffer *vb = &buf->vb; + void *vaddr = NULL; + + BUG_ON(in_interrupt()); + + videobuf_waiton(vq, &buf->vb, 0, 0); + + if (vq->int_ops && vq->int_ops->vaddr) + vaddr = vq->int_ops->vaddr(vb); + + if (vaddr) + videobuf_dma_contig_free(vq, &buf->vb); + + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +inline int buffer_activate(struct viu_dev *dev, struct viu_buf *buf) +{ + struct viu_reg *vr = dev->vr; + int bpp; + + /* setup the DMA base address */ + reg_val.field_base_addr = videobuf_to_dma_contig(&buf->vb); + + dprintk(1, "buffer_activate [%p/%d]: dma addr 0x%lx\n", + buf, buf->vb.i, (unsigned long)reg_val.field_base_addr); + + /* interlace is on by default, set horizontal DMA increment */ + reg_val.status_cfg = 0; + bpp = buf->fmt->depth >> 3; + switch (bpp) { + case 2: + reg_val.status_cfg &= ~MODE_32BIT; + reg_val.dma_inc = buf->vb.width * 2; + break; + case 4: + reg_val.status_cfg |= MODE_32BIT; + reg_val.dma_inc = buf->vb.width * 4; + break; + default: + dprintk(0, "doesn't support color depth(%d)\n", + bpp * 8); + return -EINVAL; + } + + /* setup picture_count register */ + reg_val.picture_count = (buf->vb.height / 2) << 16 | + buf->vb.width; + + reg_val.status_cfg |= DMA_ACT | INT_DMA_END_EN | INT_FIELD_EN; + + buf->vb.state = VIDEOBUF_ACTIVE; + dev->capfield = buf->vb.field; + + /* reset dma increment if needed */ + if (!V4L2_FIELD_HAS_BOTH(buf->vb.field)) + reg_val.dma_inc = 0; + + out_be32(&vr->dma_inc, reg_val.dma_inc); + out_be32(&vr->picture_count, reg_val.picture_count); + out_be32(&vr->field_base_addr, reg_val.field_base_addr); + mod_timer(&dev->vidq.timeout, jiffies + BUFFER_TIMEOUT); + return 0; +} + +static int buffer_prepare(struct videobuf_queue *vq, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct viu_fh *fh = vq->priv_data; + struct viu_buf *buf = container_of(vb, struct viu_buf, vb); + int rc; + + BUG_ON(fh->fmt == NULL); + + if (fh->width < 48 || fh->width > norm_maxw() || + fh->height < 32 || fh->height > norm_maxh()) + return -EINVAL; + buf->vb.size = (fh->width * fh->height * fh->fmt->depth) >> 3; + if (buf->vb.baddr != 0 && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != fh->fmt || + buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.field != field) { + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + } + + if (buf->vb.state == VIDEOBUF_NEEDS_INIT) { + rc = videobuf_iolock(vq, &buf->vb, NULL); + if (rc != 0) + goto fail; + + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + buf->fmt = fh->fmt; + } + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + +fail: + free_buffer(vq, buf); + return rc; +} + +static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct viu_buf *buf = container_of(vb, struct viu_buf, vb); + struct viu_fh *fh = vq->priv_data; + struct viu_dev *dev = fh->dev; + struct viu_dmaqueue *vidq = &dev->vidq; + struct viu_buf *prev; + + if (!list_empty(&vidq->queued)) { + dprintk(1, "adding vb queue=0x%08lx\n", + (unsigned long)&buf->vb.queue); + dprintk(1, "vidq pointer 0x%p, queued 0x%p\n", + vidq, &vidq->queued); + dprintk(1, "dev %p, queued: self %p, next %p, head %p\n", + dev, &vidq->queued, vidq->queued.next, + vidq->queued.prev); + list_add_tail(&buf->vb.queue, &vidq->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - append to queued\n", + buf, buf->vb.i); + } else if (list_empty(&vidq->active)) { + dprintk(1, "adding vb active=0x%08lx\n", + (unsigned long)&buf->vb.queue); + list_add_tail(&buf->vb.queue, &vidq->active); + buf->vb.state = VIDEOBUF_ACTIVE; + mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] buffer_queue - first active\n", + buf, buf->vb.i); + + buffer_activate(dev, buf); + } else { + dprintk(1, "adding vb queue2=0x%08lx\n", + (unsigned long)&buf->vb.queue); + prev = list_entry(vidq->active.prev, struct viu_buf, vb.queue); + if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_add_tail(&buf->vb.queue, &vidq->active); + buf->vb.state = VIDEOBUF_ACTIVE; + dprintk(2, "[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + } else { + list_add_tail(&buf->vb.queue, &vidq->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - first queued\n", + buf, buf->vb.i); + } + } +} + +static void buffer_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct viu_buf *buf = container_of(vb, struct viu_buf, vb); + struct viu_fh *fh = vq->priv_data; + struct viu_dev *dev = (struct viu_dev *)fh->dev; + + viu_stop_dma(dev); + free_buffer(vq, buf); +} + +static struct videobuf_queue_ops viu_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* + * IOCTL vidioc handling + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strcpy(cap->driver, "viu"); + strcpy(cap->card, "viu"); + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING | + V4L2_CAP_VIDEO_OVERLAY | + V4L2_CAP_READWRITE; + return 0; +} + +static int vidioc_enum_fmt(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + int index = f->index; + + if (f->index > NUM_FORMATS) + return -EINVAL; + + strlcpy(f->description, formats[index].name, sizeof(f->description)); + f->pixelformat = formats[index].fourcc; + return 0; +} + +static int vidioc_g_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fh *fh = priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vb_vidq.field; + f->fmt.pix.pixelformat = fh->fmt->pixelformat; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = fh->sizeimage; + return 0; +} + +static int vidioc_try_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fmt *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (!fmt) { + dprintk(1, "Fourcc format (0x%08x) invalid.", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + field = f->fmt.pix.field; + + if (field == V4L2_FIELD_ANY) { + field = V4L2_FIELD_INTERLACED; + } else if (field != V4L2_FIELD_INTERLACED) { + dprintk(1, "Field type invalid.\n"); + return -EINVAL; + } + + maxw = norm_maxw(); + maxh = norm_maxh(); + + f->fmt.pix.field = field; + if (f->fmt.pix.height < 32) + f->fmt.pix.height = 32; + if (f->fmt.pix.height > maxh) + f->fmt.pix.height = maxh; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.width > maxw) + f->fmt.pix.width = maxw; + f->fmt.pix.width &= ~0x03; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + + return 0; +} + +static int vidioc_s_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fh *fh = priv; + int ret; + + ret = vidioc_try_fmt_cap(file, fh, f); + if (ret < 0) + return ret; + + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->sizeimage = f->fmt.pix.sizeimage; + fh->vb_vidq.field = f->fmt.pix.field; + fh->type = f->type; + dprintk(1, "set to pixelformat '%4.6s'\n", (char *)&fh->fmt->name); + return 0; +} + +static int vidioc_g_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fh *fh = priv; + + f->fmt.win = fh->win; + return 0; +} + +static int verify_preview(struct viu_dev *dev, struct v4l2_window *win) +{ + enum v4l2_field field; + int maxw, maxh; + + if (dev->ovbuf.base == NULL) + return -EINVAL; + if (dev->ovfmt == NULL) + return -EINVAL; + if (win->w.width < 48 || win->w.height < 32) + return -EINVAL; + + field = win->field; + maxw = dev->crop_current.width; + maxh = dev->crop_current.height; + + if (field == V4L2_FIELD_ANY) { + field = (win->w.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_TOP; + } + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } + + win->field = field; + if (win->w.width > maxw) + win->w.width = maxw; + if (win->w.height > maxh) + win->w.height = maxh; + return 0; +} + +inline void viu_activate_overlay(struct viu_reg *viu_reg) +{ + struct viu_reg *vr = viu_reg; + + out_be32(&vr->field_base_addr, reg_val.field_base_addr); + out_be32(&vr->dma_inc, reg_val.dma_inc); + out_be32(&vr->picture_count, reg_val.picture_count); +} + +static int viu_setup_preview(struct viu_dev *dev, struct viu_fh *fh) +{ + int bpp; + + dprintk(1, "%s %dx%d %s\n", __func__, + fh->win.w.width, fh->win.w.height, dev->ovfmt->name); + + reg_val.status_cfg = 0; + + /* setup window */ + reg_val.picture_count = (fh->win.w.height / 2) << 16 | + fh->win.w.width; + + /* setup color depth and dma increment */ + bpp = dev->ovfmt->depth / 8; + switch (bpp) { + case 2: + reg_val.status_cfg &= ~MODE_32BIT; + reg_val.dma_inc = fh->win.w.width * 2; + break; + case 4: + reg_val.status_cfg |= MODE_32BIT; + reg_val.dma_inc = fh->win.w.width * 4; + break; + default: + dprintk(0, "device doesn't support color depth(%d)\n", + bpp * 8); + return -EINVAL; + } + + dev->ovfield = fh->win.field; + if (!V4L2_FIELD_HAS_BOTH(dev->ovfield)) + reg_val.dma_inc = 0; + + reg_val.status_cfg |= DMA_ACT | INT_DMA_END_EN | INT_FIELD_EN; + + /* setup the base address of the overlay buffer */ + reg_val.field_base_addr = (u32)dev->ovbuf.base; + + return 0; +} + +static int vidioc_s_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fh *fh = priv; + struct viu_dev *dev = (struct viu_dev *)fh->dev; + unsigned long flags; + int err; + + err = verify_preview(dev, &f->fmt.win); + if (err) + return err; + + fh->win = f->fmt.win; + + spin_lock_irqsave(&dev->slock, flags); + viu_setup_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + return 0; +} + +static int vidioc_try_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + return 0; +} + +static int vidioc_overlay(struct file *file, void *priv, unsigned int on) +{ + struct viu_fh *fh = priv; + struct viu_dev *dev = (struct viu_dev *)fh->dev; + unsigned long flags; + + if (on) { + spin_lock_irqsave(&dev->slock, flags); + viu_activate_overlay(dev->vr); + dev->ovenable = 1; + + /* start dma */ + viu_start_dma(dev); + spin_unlock_irqrestore(&dev->slock, flags); + } else { + viu_stop_dma(dev); + dev->ovenable = 0; + } + + return 0; +} + +int vidioc_g_fbuf(struct file *file, void *priv, struct v4l2_framebuffer *arg) +{ + struct viu_fh *fh = priv; + struct viu_dev *dev = fh->dev; + struct v4l2_framebuffer *fb = arg; + + *fb = dev->ovbuf; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; + return 0; +} + +int vidioc_s_fbuf(struct file *file, void *priv, const struct v4l2_framebuffer *arg) +{ + struct viu_fh *fh = priv; + struct viu_dev *dev = fh->dev; + const struct v4l2_framebuffer *fb = arg; + struct viu_fmt *fmt; + + if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* check args */ + fmt = format_by_fourcc(fb->fmt.pixelformat); + if (fmt == NULL) + return -EINVAL; + + /* ok, accept it */ + dev->ovbuf = *fb; + dev->ovfmt = fmt; + if (dev->ovbuf.fmt.bytesperline == 0) { + dev->ovbuf.fmt.bytesperline = + dev->ovbuf.fmt.width * fmt->depth / 8; + } + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct viu_fh *fh = priv; + + return videobuf_reqbufs(&fh->vb_vidq, p); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct viu_fh *fh = priv; + + return videobuf_querybuf(&fh->vb_vidq, p); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct viu_fh *fh = priv; + + return videobuf_qbuf(&fh->vb_vidq, p); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct viu_fh *fh = priv; + + return videobuf_dqbuf(&fh->vb_vidq, p, + file->f_flags & O_NONBLOCK); +} + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct viu_fh *fh = priv; + struct viu_dev *dev = fh->dev; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (fh->type != i) + return -EINVAL; + + if (dev->ovenable) + dev->ovenable = 0; + + viu_start_dma(fh->dev); + + return videobuf_streamon(&fh->vb_vidq); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct viu_fh *fh = priv; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (fh->type != i) + return -EINVAL; + + viu_stop_dma(fh->dev); + + return videobuf_streamoff(&fh->vb_vidq); +} + +#define decoder_call(viu, o, f, args...) \ + v4l2_subdev_call(viu->decoder, o, f, ##args) + +static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct viu_fh *fh = priv; + + decoder_call(fh->dev, video, querystd, std_id); + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) +{ + struct viu_fh *fh = priv; + + fh->dev->std = id; + decoder_call(fh->dev, core, s_std, id); + return 0; +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct viu_fh *fh = priv; + + *std_id = fh->dev->std; + return 0; +} + +/* only one input in this driver */ +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct viu_fh *fh = priv; + + if (inp->index != 0) + return -EINVAL; + + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = fh->dev->vdev->tvnorms; + strcpy(inp->name, "Camera"); + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct viu_fh *fh = priv; + + if (i > 1) + return -EINVAL; + + decoder_call(fh->dev, video, s_routing, i, 0, 0); + return 0; +} + +/* Controls */ +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) { + if (qc->id && qc->id == viu_qctrl[i].id) { + memcpy(qc, &(viu_qctrl[i]), sizeof(*qc)); + return 0; + } + } + return -EINVAL; +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) { + if (ctrl->id == viu_qctrl[i].id) { + ctrl->value = qctl_regs[i]; + return 0; + } + } + return -EINVAL; +} +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) { + if (ctrl->id == viu_qctrl[i].id) { + if (ctrl->value < viu_qctrl[i].minimum + || ctrl->value > viu_qctrl[i].maximum) + return -ERANGE; + qctl_regs[i] = ctrl->value; + return 0; + } + } + return -EINVAL; +} + +inline void viu_activate_next_buf(struct viu_dev *dev, + struct viu_dmaqueue *viuq) +{ + struct viu_dmaqueue *vidq = viuq; + struct viu_buf *buf; + + /* launch another DMA operation for an active/queued buffer */ + if (!list_empty(&vidq->active)) { + buf = list_entry(vidq->active.next, struct viu_buf, + vb.queue); + dprintk(1, "start another queued buffer: 0x%p\n", buf); + buffer_activate(dev, buf); + } else if (!list_empty(&vidq->queued)) { + buf = list_entry(vidq->queued.next, struct viu_buf, + vb.queue); + list_del(&buf->vb.queue); + + dprintk(1, "start another queued buffer: 0x%p\n", buf); + list_add_tail(&buf->vb.queue, &vidq->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buffer_activate(dev, buf); + } +} + +inline void viu_default_settings(struct viu_reg *viu_reg) +{ + struct viu_reg *vr = viu_reg; + + out_be32(&vr->luminance, 0x9512A254); + out_be32(&vr->chroma_r, 0x03310000); + out_be32(&vr->chroma_g, 0x06600F38); + out_be32(&vr->chroma_b, 0x00000409); + out_be32(&vr->alpha, 0x000000ff); + out_be32(&vr->req_alarm, 0x00000090); + dprintk(1, "status reg: 0x%08x, field base: 0x%08x\n", + in_be32(&vr->status_cfg), in_be32(&vr->field_base_addr)); +} + +static void viu_overlay_intr(struct viu_dev *dev, u32 status) +{ + struct viu_reg *vr = dev->vr; + + if (status & INT_DMA_END_STATUS) + dev->dma_done = 1; + + if (status & INT_FIELD_STATUS) { + if (dev->dma_done) { + u32 addr = reg_val.field_base_addr; + + dev->dma_done = 0; + if (status & FIELD_NO) + addr += reg_val.dma_inc; + + out_be32(&vr->field_base_addr, addr); + out_be32(&vr->dma_inc, reg_val.dma_inc); + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | + (status & INT_ALL_STATUS) | + reg_val.status_cfg); + } else if (status & INT_VSYNC_STATUS) { + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | + (status & INT_ALL_STATUS) | + reg_val.status_cfg); + } + } +} + +static void viu_capture_intr(struct viu_dev *dev, u32 status) +{ + struct viu_dmaqueue *vidq = &dev->vidq; + struct viu_reg *vr = dev->vr; + struct viu_buf *buf; + int field_num; + int need_two; + int dma_done = 0; + + field_num = status & FIELD_NO; + need_two = V4L2_FIELD_HAS_BOTH(dev->capfield); + + if (status & INT_DMA_END_STATUS) { + dma_done = 1; + if (((field_num == 0) && (dev->field == 0)) || + (field_num && (dev->field == 1))) + dev->field++; + } + + if (status & INT_FIELD_STATUS) { + dprintk(1, "irq: field %d, done %d\n", + !!field_num, dma_done); + if (unlikely(dev->first)) { + if (field_num == 0) { + dev->first = 0; + dprintk(1, "activate first buf\n"); + viu_activate_next_buf(dev, vidq); + } else + dprintk(1, "wait field 0\n"); + return; + } + + /* setup buffer address for next dma operation */ + if (!list_empty(&vidq->active)) { + u32 addr = reg_val.field_base_addr; + + if (field_num && need_two) { + addr += reg_val.dma_inc; + dprintk(1, "field 1, 0x%lx, dev field %d\n", + (unsigned long)addr, dev->field); + } + out_be32(&vr->field_base_addr, addr); + out_be32(&vr->dma_inc, reg_val.dma_inc); + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | + (status & INT_ALL_STATUS) | + reg_val.status_cfg); + return; + } + } + + if (dma_done && field_num && (dev->field == 2)) { + dev->field = 0; + buf = list_entry(vidq->active.next, + struct viu_buf, vb.queue); + dprintk(1, "viu/0: [%p/%d] 0x%lx/0x%lx: dma complete\n", + buf, buf->vb.i, + (unsigned long)videobuf_to_dma_contig(&buf->vb), + (unsigned long)in_be32(&vr->field_base_addr)); + + if (waitqueue_active(&buf->vb.done)) { + list_del(&buf->vb.queue); + v4l2_get_timestamp(&buf->vb.ts); + buf->vb.state = VIDEOBUF_DONE; + buf->vb.field_count++; + wake_up(&buf->vb.done); + } + /* activate next dma buffer */ + viu_activate_next_buf(dev, vidq); + } +} + +static irqreturn_t viu_intr(int irq, void *dev_id) +{ + struct viu_dev *dev = (struct viu_dev *)dev_id; + struct viu_reg *vr = dev->vr; + u32 status; + u32 error; + + status = in_be32(&vr->status_cfg); + + if (status & INT_ERROR_STATUS) { + dev->irqs.error_irq++; + error = status & ERR_MASK; + if (error) + dprintk(1, "Err: error(%d), times:%d!\n", + error >> 4, dev->irqs.error_irq); + /* Clear interrupt error bit and error flags */ + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | INT_ERROR_STATUS); + } + + if (status & INT_DMA_END_STATUS) { + dev->irqs.dma_end_irq++; + dev->dma_done = 1; + dprintk(2, "VIU DMA end interrupt times: %d\n", + dev->irqs.dma_end_irq); + } + + if (status & INT_HSYNC_STATUS) + dev->irqs.hsync_irq++; + + if (status & INT_FIELD_STATUS) { + dev->irqs.field_irq++; + dprintk(2, "VIU field interrupt times: %d\n", + dev->irqs.field_irq); + } + + if (status & INT_VSTART_STATUS) + dev->irqs.vstart_irq++; + + if (status & INT_VSYNC_STATUS) { + dev->irqs.vsync_irq++; + dprintk(2, "VIU vsync interrupt times: %d\n", + dev->irqs.vsync_irq); + } + + /* clear all pending irqs */ + status = in_be32(&vr->status_cfg); + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | (status & INT_ALL_STATUS)); + + if (dev->ovenable) { + viu_overlay_intr(dev, status); + return IRQ_HANDLED; + } + + /* Capture mode */ + viu_capture_intr(dev, status); + return IRQ_HANDLED; +} + +/* + * File operations for the device + */ +static int viu_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct viu_dev *dev = video_get_drvdata(vdev); + struct viu_fh *fh; + struct viu_reg *vr; + int minor = vdev->minor; + u32 status_cfg; + int i; + + dprintk(1, "viu: open (minor=%d)\n", minor); + + dev->users++; + if (dev->users > 1) { + dev->users--; + return -EBUSY; + } + + vr = dev->vr; + + dprintk(1, "open minor=%d type=%s users=%d\n", minor, + v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users); + + if (mutex_lock_interruptible(&dev->lock)) { + dev->users--; + return -ERESTARTSYS; + } + + /* allocate and initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (!fh) { + dev->users--; + mutex_unlock(&dev->lock); + return -ENOMEM; + } + + file->private_data = fh; + fh->dev = dev; + + fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + fh->fmt = format_by_fourcc(V4L2_PIX_FMT_RGB32); + fh->width = norm_maxw(); + fh->height = norm_maxh(); + dev->crop_current.width = fh->width; + dev->crop_current.height = fh->height; + + /* Put all controls at a sane state */ + for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) + qctl_regs[i] = viu_qctrl[i].default_value; + + dprintk(1, "Open: fh=0x%08lx, dev=0x%08lx, dev->vidq=0x%08lx\n", + (unsigned long)fh, (unsigned long)dev, + (unsigned long)&dev->vidq); + dprintk(1, "Open: list_empty queued=%d\n", + list_empty(&dev->vidq.queued)); + dprintk(1, "Open: list_empty active=%d\n", + list_empty(&dev->vidq.active)); + + viu_default_settings(vr); + + status_cfg = in_be32(&vr->status_cfg); + out_be32(&vr->status_cfg, + status_cfg & ~(INT_VSYNC_EN | INT_HSYNC_EN | + INT_FIELD_EN | INT_VSTART_EN | + INT_DMA_END_EN | INT_ERROR_EN | INT_ECC_EN)); + + status_cfg = in_be32(&vr->status_cfg); + out_be32(&vr->status_cfg, status_cfg | INT_ALL_STATUS); + + spin_lock_init(&fh->vbq_lock); + videobuf_queue_dma_contig_init(&fh->vb_vidq, &viu_video_qops, + dev->dev, &fh->vbq_lock, + fh->type, V4L2_FIELD_INTERLACED, + sizeof(struct viu_buf), fh, + &fh->dev->lock); + mutex_unlock(&dev->lock); + return 0; +} + +static ssize_t viu_read(struct file *file, char __user *data, size_t count, + loff_t *ppos) +{ + struct viu_fh *fh = file->private_data; + struct viu_dev *dev = fh->dev; + int ret = 0; + + dprintk(2, "%s\n", __func__); + if (dev->ovenable) + dev->ovenable = 0; + + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + viu_start_dma(dev); + ret = videobuf_read_stream(&fh->vb_vidq, data, count, + ppos, 0, file->f_flags & O_NONBLOCK); + mutex_unlock(&dev->lock); + return ret; + } + return 0; +} + +static unsigned int viu_poll(struct file *file, struct poll_table_struct *wait) +{ + struct viu_fh *fh = file->private_data; + struct videobuf_queue *q = &fh->vb_vidq; + struct viu_dev *dev = fh->dev; + unsigned int res; + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + return POLLERR; + + mutex_lock(&dev->lock); + res = videobuf_poll_stream(file, q, wait); + mutex_unlock(&dev->lock); + return res; +} + +static int viu_release(struct file *file) +{ + struct viu_fh *fh = file->private_data; + struct viu_dev *dev = fh->dev; + int minor = video_devdata(file)->minor; + + mutex_lock(&dev->lock); + viu_stop_dma(dev); + videobuf_stop(&fh->vb_vidq); + videobuf_mmap_free(&fh->vb_vidq); + mutex_unlock(&dev->lock); + + kfree(fh); + + dev->users--; + dprintk(1, "close (minor=%d, users=%d)\n", + minor, dev->users); + return 0; +} + +void viu_reset(struct viu_reg *reg) +{ + out_be32(®->status_cfg, 0); + out_be32(®->luminance, 0x9512a254); + out_be32(®->chroma_r, 0x03310000); + out_be32(®->chroma_g, 0x06600f38); + out_be32(®->chroma_b, 0x00000409); + out_be32(®->field_base_addr, 0); + out_be32(®->dma_inc, 0); + out_be32(®->picture_count, 0x01e002d0); + out_be32(®->req_alarm, 0x00000090); + out_be32(®->alpha, 0x000000ff); +} + +static int viu_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct viu_fh *fh = file->private_data; + struct viu_dev *dev = fh->dev; + int ret; + + dprintk(1, "mmap called, vma=0x%08lx\n", (unsigned long)vma); + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); + mutex_unlock(&dev->lock); + + dprintk(1, "vma start=0x%08lx, size=%ld, ret=%d\n", + (unsigned long)vma->vm_start, + (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, + ret); + + return ret; +} + +static struct v4l2_file_operations viu_fops = { + .owner = THIS_MODULE, + .open = viu_open, + .release = viu_release, + .read = viu_read, + .poll = viu_poll, + .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ + .mmap = viu_mmap, +}; + +static const struct v4l2_ioctl_ops viu_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_cap, + .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt, + .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_overlay, + .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_overlay, + .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_overlay, + .vidioc_overlay = vidioc_overlay, + .vidioc_g_fbuf = vidioc_g_fbuf, + .vidioc_s_fbuf = vidioc_s_fbuf, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_querystd = vidioc_querystd, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + +static struct video_device viu_template = { + .name = "FSL viu", + .fops = &viu_fops, + .minor = -1, + .ioctl_ops = &viu_ioctl_ops, + .release = video_device_release, + + .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL, + .current_norm = V4L2_STD_NTSC_M, +}; + +static int viu_of_probe(struct platform_device *op) +{ + struct viu_dev *viu_dev; + struct video_device *vdev; + struct resource r; + struct viu_reg __iomem *viu_regs; + struct i2c_adapter *ad; + int ret, viu_irq; + + ret = of_address_to_resource(op->dev.of_node, 0, &r); + if (ret) { + dev_err(&op->dev, "Can't parse device node resource\n"); + return -ENODEV; + } + + viu_irq = irq_of_parse_and_map(op->dev.of_node, 0); + if (viu_irq == NO_IRQ) { + dev_err(&op->dev, "Error while mapping the irq\n"); + return -EINVAL; + } + + /* request mem region */ + if (!devm_request_mem_region(&op->dev, r.start, + sizeof(struct viu_reg), DRV_NAME)) { + dev_err(&op->dev, "Error while requesting mem region\n"); + ret = -EBUSY; + goto err; + } + + /* remap registers */ + viu_regs = devm_ioremap(&op->dev, r.start, sizeof(struct viu_reg)); + if (!viu_regs) { + dev_err(&op->dev, "Can't map register set\n"); + ret = -ENOMEM; + goto err; + } + + /* Prepare our private structure */ + viu_dev = devm_kzalloc(&op->dev, sizeof(struct viu_dev), GFP_ATOMIC); + if (!viu_dev) { + dev_err(&op->dev, "Can't allocate private structure\n"); + ret = -ENOMEM; + goto err; + } + + viu_dev->vr = viu_regs; + viu_dev->irq = viu_irq; + viu_dev->dev = &op->dev; + + /* init video dma queues */ + INIT_LIST_HEAD(&viu_dev->vidq.active); + INIT_LIST_HEAD(&viu_dev->vidq.queued); + + snprintf(viu_dev->v4l2_dev.name, + sizeof(viu_dev->v4l2_dev.name), "%s", "VIU"); + ret = v4l2_device_register(viu_dev->dev, &viu_dev->v4l2_dev); + if (ret < 0) { + dev_err(&op->dev, "v4l2_device_register() failed: %d\n", ret); + goto err; + } + + ad = i2c_get_adapter(0); + viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad, + "saa7113", VIU_VIDEO_DECODER_ADDR, NULL); + + viu_dev->vidq.timeout.function = viu_vid_timeout; + viu_dev->vidq.timeout.data = (unsigned long)viu_dev; + init_timer(&viu_dev->vidq.timeout); + viu_dev->first = 1; + + /* Allocate memory for video device */ + vdev = video_device_alloc(); + if (vdev == NULL) { + ret = -ENOMEM; + goto err_vdev; + } + + memcpy(vdev, &viu_template, sizeof(viu_template)); + + vdev->v4l2_dev = &viu_dev->v4l2_dev; + + viu_dev->vdev = vdev; + + /* initialize locks */ + mutex_init(&viu_dev->lock); + viu_dev->vdev->lock = &viu_dev->lock; + spin_lock_init(&viu_dev->slock); + + video_set_drvdata(viu_dev->vdev, viu_dev); + + mutex_lock(&viu_dev->lock); + + ret = video_register_device(viu_dev->vdev, VFL_TYPE_GRABBER, -1); + if (ret < 0) { + video_device_release(viu_dev->vdev); + goto err_vdev; + } + + /* enable VIU clock */ + viu_dev->clk = clk_get(&op->dev, "viu_clk"); + if (IS_ERR(viu_dev->clk)) { + dev_err(&op->dev, "failed to find the clock module!\n"); + ret = -ENODEV; + goto err_clk; + } else { + clk_enable(viu_dev->clk); + } + + /* reset VIU module */ + viu_reset(viu_dev->vr); + + /* install interrupt handler */ + if (request_irq(viu_dev->irq, viu_intr, 0, "viu", (void *)viu_dev)) { + dev_err(&op->dev, "Request VIU IRQ failed.\n"); + ret = -ENODEV; + goto err_irq; + } + + mutex_unlock(&viu_dev->lock); + + dev_info(&op->dev, "Freescale VIU Video Capture Board\n"); + return ret; + +err_irq: + clk_disable(viu_dev->clk); + clk_put(viu_dev->clk); +err_clk: + video_unregister_device(viu_dev->vdev); +err_vdev: + mutex_unlock(&viu_dev->lock); + i2c_put_adapter(ad); + v4l2_device_unregister(&viu_dev->v4l2_dev); +err: + irq_dispose_mapping(viu_irq); + return ret; +} + +static int viu_of_remove(struct platform_device *op) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev); + struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); + struct v4l2_subdev *sdev = list_entry(v4l2_dev->subdevs.next, + struct v4l2_subdev, list); + struct i2c_client *client = v4l2_get_subdevdata(sdev); + + free_irq(dev->irq, (void *)dev); + irq_dispose_mapping(dev->irq); + + clk_disable(dev->clk); + clk_put(dev->clk); + + video_unregister_device(dev->vdev); + i2c_put_adapter(client->adapter); + v4l2_device_unregister(&dev->v4l2_dev); + return 0; +} + +#ifdef CONFIG_PM +static int viu_suspend(struct platform_device *op, pm_message_t state) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev); + struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); + + clk_disable(dev->clk); + return 0; +} + +static int viu_resume(struct platform_device *op) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev); + struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); + + clk_enable(dev->clk); + return 0; +} +#endif + +/* + * Initialization and module stuff + */ +static struct of_device_id mpc512x_viu_of_match[] = { + { + .compatible = "fsl,mpc5121-viu", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc512x_viu_of_match); + +static struct platform_driver viu_of_platform_driver = { + .probe = viu_of_probe, + .remove = viu_of_remove, +#ifdef CONFIG_PM + .suspend = viu_suspend, + .resume = viu_resume, +#endif + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = mpc512x_viu_of_match, + }, +}; + +module_platform_driver(viu_of_platform_driver); + +MODULE_DESCRIPTION("Freescale Video-In(VIU)"); +MODULE_AUTHOR("Hongjun Chen"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VIU_VERSION); diff --git a/drivers/media/platform/indycam.c b/drivers/media/platform/indycam.c new file mode 100644 index 00000000..54823633 --- /dev/null +++ b/drivers/media/platform/indycam.c @@ -0,0 +1,390 @@ +/* + * indycam.c - Silicon Graphics IndyCam digital camera driver + * + * Copyright (C) 2003 Ladislav Michl + * Copyright (C) 2004,2005 Mikael Nousiainen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* IndyCam decodes stream of photons into digital image representation ;-) */ +#include +#include +#include +#include + +#include "indycam.h" + +#define INDYCAM_MODULE_VERSION "0.0.5" + +MODULE_DESCRIPTION("SGI IndyCam driver"); +MODULE_VERSION(INDYCAM_MODULE_VERSION); +MODULE_AUTHOR("Mikael Nousiainen "); +MODULE_LICENSE("GPL"); + + +// #define INDYCAM_DEBUG + +#ifdef INDYCAM_DEBUG +#define dprintk(x...) printk("IndyCam: " x); +#define indycam_regdump(client) indycam_regdump_debug(client) +#else +#define dprintk(x...) +#define indycam_regdump(client) +#endif + +struct indycam { + struct v4l2_subdev sd; + u8 version; +}; + +static inline struct indycam *to_indycam(struct v4l2_subdev *sd) +{ + return container_of(sd, struct indycam, sd); +} + +static const u8 initseq[] = { + INDYCAM_CONTROL_AGCENA, /* INDYCAM_CONTROL */ + INDYCAM_SHUTTER_60, /* INDYCAM_SHUTTER */ + INDYCAM_GAIN_DEFAULT, /* INDYCAM_GAIN */ + 0x00, /* INDYCAM_BRIGHTNESS (read-only) */ + INDYCAM_RED_BALANCE_DEFAULT, /* INDYCAM_RED_BALANCE */ + INDYCAM_BLUE_BALANCE_DEFAULT, /* INDYCAM_BLUE_BALANCE */ + INDYCAM_RED_SATURATION_DEFAULT, /* INDYCAM_RED_SATURATION */ + INDYCAM_BLUE_SATURATION_DEFAULT,/* INDYCAM_BLUE_SATURATION */ +}; + +/* IndyCam register handling */ + +static int indycam_read_reg(struct v4l2_subdev *sd, u8 reg, u8 *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + if (reg == INDYCAM_REG_RESET) { + dprintk("indycam_read_reg(): " + "skipping write-only register %d\n", reg); + *value = 0; + return 0; + } + + ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) { + printk(KERN_ERR "IndyCam: indycam_read_reg(): read failed, " + "register = 0x%02x\n", reg); + return ret; + } + + *value = (u8)ret; + + return 0; +} + +static int indycam_write_reg(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int err; + + if (reg == INDYCAM_REG_BRIGHTNESS || reg == INDYCAM_REG_VERSION) { + dprintk("indycam_write_reg(): " + "skipping read-only register %d\n", reg); + return 0; + } + + dprintk("Writing Reg %d = 0x%02x\n", reg, value); + err = i2c_smbus_write_byte_data(client, reg, value); + + if (err) { + printk(KERN_ERR "IndyCam: indycam_write_reg(): write failed, " + "register = 0x%02x, value = 0x%02x\n", reg, value); + } + return err; +} + +static int indycam_write_block(struct v4l2_subdev *sd, u8 reg, + u8 length, u8 *data) +{ + int i, err; + + for (i = 0; i < length; i++) { + err = indycam_write_reg(sd, reg + i, data[i]); + if (err) + return err; + } + + return 0; +} + +/* Helper functions */ + +#ifdef INDYCAM_DEBUG +static void indycam_regdump_debug(struct v4l2_subdev *sd) +{ + int i; + u8 val; + + for (i = 0; i < 9; i++) { + indycam_read_reg(sd, i, &val); + dprintk("Reg %d = 0x%02x\n", i, val); + } +} +#endif + +static int indycam_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct indycam *camera = to_indycam(sd); + u8 reg; + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = indycam_read_reg(sd, INDYCAM_REG_CONTROL, ®); + if (ret) + return -EIO; + if (ctrl->id == V4L2_CID_AUTOGAIN) + ctrl->value = (reg & INDYCAM_CONTROL_AGCENA) + ? 1 : 0; + else + ctrl->value = (reg & INDYCAM_CONTROL_AWBCTL) + ? 1 : 0; + break; + case V4L2_CID_EXPOSURE: + ret = indycam_read_reg(sd, INDYCAM_REG_SHUTTER, ®); + if (ret) + return -EIO; + ctrl->value = ((s32)reg == 0x00) ? 0xff : ((s32)reg - 1); + break; + case V4L2_CID_GAIN: + ret = indycam_read_reg(sd, INDYCAM_REG_GAIN, ®); + if (ret) + return -EIO; + ctrl->value = (s32)reg; + break; + case V4L2_CID_RED_BALANCE: + ret = indycam_read_reg(sd, INDYCAM_REG_RED_BALANCE, ®); + if (ret) + return -EIO; + ctrl->value = (s32)reg; + break; + case V4L2_CID_BLUE_BALANCE: + ret = indycam_read_reg(sd, INDYCAM_REG_BLUE_BALANCE, ®); + if (ret) + return -EIO; + ctrl->value = (s32)reg; + break; + case INDYCAM_CONTROL_RED_SATURATION: + ret = indycam_read_reg(sd, + INDYCAM_REG_RED_SATURATION, ®); + if (ret) + return -EIO; + ctrl->value = (s32)reg; + break; + case INDYCAM_CONTROL_BLUE_SATURATION: + ret = indycam_read_reg(sd, + INDYCAM_REG_BLUE_SATURATION, ®); + if (ret) + return -EIO; + ctrl->value = (s32)reg; + break; + case V4L2_CID_GAMMA: + if (camera->version == CAMERA_VERSION_MOOSE) { + ret = indycam_read_reg(sd, + INDYCAM_REG_GAMMA, ®); + if (ret) + return -EIO; + ctrl->value = (s32)reg; + } else { + ctrl->value = INDYCAM_GAMMA_DEFAULT; + } + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int indycam_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct indycam *camera = to_indycam(sd); + u8 reg; + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = indycam_read_reg(sd, INDYCAM_REG_CONTROL, ®); + if (ret) + break; + + if (ctrl->id == V4L2_CID_AUTOGAIN) { + if (ctrl->value) + reg |= INDYCAM_CONTROL_AGCENA; + else + reg &= ~INDYCAM_CONTROL_AGCENA; + } else { + if (ctrl->value) + reg |= INDYCAM_CONTROL_AWBCTL; + else + reg &= ~INDYCAM_CONTROL_AWBCTL; + } + + ret = indycam_write_reg(sd, INDYCAM_REG_CONTROL, reg); + break; + case V4L2_CID_EXPOSURE: + reg = (ctrl->value == 0xff) ? 0x00 : (ctrl->value + 1); + ret = indycam_write_reg(sd, INDYCAM_REG_SHUTTER, reg); + break; + case V4L2_CID_GAIN: + ret = indycam_write_reg(sd, INDYCAM_REG_GAIN, ctrl->value); + break; + case V4L2_CID_RED_BALANCE: + ret = indycam_write_reg(sd, INDYCAM_REG_RED_BALANCE, + ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + ret = indycam_write_reg(sd, INDYCAM_REG_BLUE_BALANCE, + ctrl->value); + break; + case INDYCAM_CONTROL_RED_SATURATION: + ret = indycam_write_reg(sd, INDYCAM_REG_RED_SATURATION, + ctrl->value); + break; + case INDYCAM_CONTROL_BLUE_SATURATION: + ret = indycam_write_reg(sd, INDYCAM_REG_BLUE_SATURATION, + ctrl->value); + break; + case V4L2_CID_GAMMA: + if (camera->version == CAMERA_VERSION_MOOSE) { + ret = indycam_write_reg(sd, INDYCAM_REG_GAMMA, + ctrl->value); + } + break; + default: + ret = -EINVAL; + } + + return ret; +} + +/* I2C-interface */ + +static int indycam_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct indycam *camera = to_indycam(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_INDYCAM, + camera->version); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops indycam_core_ops = { + .g_chip_ident = indycam_g_chip_ident, + .g_ctrl = indycam_g_ctrl, + .s_ctrl = indycam_s_ctrl, +}; + +static const struct v4l2_subdev_ops indycam_ops = { + .core = &indycam_core_ops, +}; + +static int indycam_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err = 0; + struct indycam *camera; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + camera = kzalloc(sizeof(struct indycam), GFP_KERNEL); + if (!camera) + return -ENOMEM; + + sd = &camera->sd; + v4l2_i2c_subdev_init(sd, client, &indycam_ops); + + camera->version = i2c_smbus_read_byte_data(client, + INDYCAM_REG_VERSION); + if (camera->version != CAMERA_VERSION_INDY && + camera->version != CAMERA_VERSION_MOOSE) { + kfree(camera); + return -ENODEV; + } + + printk(KERN_INFO "IndyCam v%d.%d detected\n", + INDYCAM_VERSION_MAJOR(camera->version), + INDYCAM_VERSION_MINOR(camera->version)); + + indycam_regdump(sd); + + // initialize + err = indycam_write_block(sd, 0, sizeof(initseq), (u8 *)&initseq); + if (err) { + printk(KERN_ERR "IndyCam initialization failed\n"); + kfree(camera); + return -EIO; + } + + indycam_regdump(sd); + + // white balance + err = indycam_write_reg(sd, INDYCAM_REG_CONTROL, + INDYCAM_CONTROL_AGCENA | INDYCAM_CONTROL_AWBCTL); + if (err) { + printk(KERN_ERR "IndyCam: White balancing camera failed\n"); + kfree(camera); + return -EIO; + } + + indycam_regdump(sd); + + printk(KERN_INFO "IndyCam initialized\n"); + + return 0; +} + +static int indycam_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_indycam(sd)); + return 0; +} + +static const struct i2c_device_id indycam_id[] = { + { "indycam", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, indycam_id); + +static struct i2c_driver indycam_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "indycam", + }, + .probe = indycam_probe, + .remove = indycam_remove, + .id_table = indycam_id, +}; + +module_i2c_driver(indycam_driver); diff --git a/drivers/media/platform/indycam.h b/drivers/media/platform/indycam.h new file mode 100644 index 00000000..881f21c4 --- /dev/null +++ b/drivers/media/platform/indycam.h @@ -0,0 +1,93 @@ +/* + * indycam.h - Silicon Graphics IndyCam digital camera driver + * + * Copyright (C) 2003 Ladislav Michl + * Copyright (C) 2004,2005 Mikael Nousiainen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _INDYCAM_H_ +#define _INDYCAM_H_ + +/* I2C address for the Guinness Camera */ +#define INDYCAM_ADDR 0x56 + +/* Camera version */ +#define CAMERA_VERSION_INDY 0x10 /* v1.0 */ +#define CAMERA_VERSION_MOOSE 0x12 /* v1.2 */ +#define INDYCAM_VERSION_MAJOR(x) (((x) & 0xf0) >> 4) +#define INDYCAM_VERSION_MINOR(x) ((x) & 0x0f) + +/* Register bus addresses */ +#define INDYCAM_REG_CONTROL 0x00 +#define INDYCAM_REG_SHUTTER 0x01 +#define INDYCAM_REG_GAIN 0x02 +#define INDYCAM_REG_BRIGHTNESS 0x03 /* read-only */ +#define INDYCAM_REG_RED_BALANCE 0x04 +#define INDYCAM_REG_BLUE_BALANCE 0x05 +#define INDYCAM_REG_RED_SATURATION 0x06 +#define INDYCAM_REG_BLUE_SATURATION 0x07 +#define INDYCAM_REG_GAMMA 0x08 +#define INDYCAM_REG_VERSION 0x0e /* read-only */ +#define INDYCAM_REG_RESET 0x0f /* write-only */ + +#define INDYCAM_REG_LED 0x46 +#define INDYCAM_REG_ORIENTATION 0x47 +#define INDYCAM_REG_BUTTON 0x48 + +/* Field definitions of registers */ +#define INDYCAM_CONTROL_AGCENA (1<<0) /* automatic gain control */ +#define INDYCAM_CONTROL_AWBCTL (1<<1) /* automatic white balance */ + /* 2-3 are reserved */ +#define INDYCAM_CONTROL_EVNFLD (1<<4) /* read-only */ + +#define INDYCAM_SHUTTER_10000 0x02 /* 1/10000 second */ +#define INDYCAM_SHUTTER_4000 0x04 /* 1/4000 second */ +#define INDYCAM_SHUTTER_2000 0x08 /* 1/2000 second */ +#define INDYCAM_SHUTTER_1000 0x10 /* 1/1000 second */ +#define INDYCAM_SHUTTER_500 0x20 /* 1/500 second */ +#define INDYCAM_SHUTTER_250 0x3f /* 1/250 second */ +#define INDYCAM_SHUTTER_125 0x7e /* 1/125 second */ +#define INDYCAM_SHUTTER_100 0x9e /* 1/100 second */ +#define INDYCAM_SHUTTER_60 0x00 /* 1/60 second */ + +#define INDYCAM_LED_ACTIVE 0x10 +#define INDYCAM_LED_INACTIVE 0x30 +#define INDYCAM_ORIENTATION_BOTTOM_TO_TOP 0x40 +#define INDYCAM_BUTTON_RELEASED 0x10 + +/* Values for controls */ +#define INDYCAM_SHUTTER_MIN 0x00 +#define INDYCAM_SHUTTER_MAX 0xff +#define INDYCAM_GAIN_MIN 0x00 +#define INDYCAM_GAIN_MAX 0xff +#define INDYCAM_RED_BALANCE_MIN 0x00 +#define INDYCAM_RED_BALANCE_MAX 0xff +#define INDYCAM_BLUE_BALANCE_MIN 0x00 +#define INDYCAM_BLUE_BALANCE_MAX 0xff +#define INDYCAM_RED_SATURATION_MIN 0x00 +#define INDYCAM_RED_SATURATION_MAX 0xff +#define INDYCAM_BLUE_SATURATION_MIN 0x00 +#define INDYCAM_BLUE_SATURATION_MAX 0xff +#define INDYCAM_GAMMA_MIN 0x00 +#define INDYCAM_GAMMA_MAX 0xff + +#define INDYCAM_AGC_DEFAULT 1 +#define INDYCAM_AWB_DEFAULT 0 +#define INDYCAM_SHUTTER_DEFAULT 0xff +#define INDYCAM_GAIN_DEFAULT 0x80 +#define INDYCAM_RED_BALANCE_DEFAULT 0x18 +#define INDYCAM_BLUE_BALANCE_DEFAULT 0xa4 +#define INDYCAM_RED_SATURATION_DEFAULT 0x80 +#define INDYCAM_BLUE_SATURATION_DEFAULT 0xc0 +#define INDYCAM_GAMMA_DEFAULT 0x80 + +/* Driver interface definitions */ + +#define INDYCAM_CONTROL_RED_SATURATION (V4L2_CID_PRIVATE_BASE + 0) +#define INDYCAM_CONTROL_BLUE_SATURATION (V4L2_CID_PRIVATE_BASE + 1) + +#endif diff --git a/drivers/media/platform/m2m-deinterlace.c b/drivers/media/platform/m2m-deinterlace.c new file mode 100644 index 00000000..75856464 --- /dev/null +++ b/drivers/media/platform/m2m-deinterlace.c @@ -0,0 +1,1109 @@ +/* + * V4L2 deinterlacing support. + * + * Copyright (c) 2012 Vista Silicon S.L. + * Javier Martin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define MEM2MEM_TEST_MODULE_NAME "mem2mem-deinterlace" + +MODULE_DESCRIPTION("mem2mem device which supports deinterlacing using dmaengine"); +MODULE_AUTHOR("Javier Martin v4l2_dev, "%s: " fmt, __func__, ## arg) + +struct deinterlace_fmt { + char *name; + u32 fourcc; + /* Types the format can be used for */ + u32 types; +}; + +static struct deinterlace_fmt formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .types = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT, + }, + { + .name = "YUYV 4:2:2", + .fourcc = V4L2_PIX_FMT_YUYV, + .types = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT, + }, +}; + +#define NUM_FORMATS ARRAY_SIZE(formats) + +/* Per-queue, driver-specific private data */ +struct deinterlace_q_data { + unsigned int width; + unsigned int height; + unsigned int sizeimage; + struct deinterlace_fmt *fmt; + enum v4l2_field field; +}; + +enum { + V4L2_M2M_SRC = 0, + V4L2_M2M_DST = 1, +}; + +enum { + YUV420_DMA_Y_ODD, + YUV420_DMA_Y_EVEN, + YUV420_DMA_U_ODD, + YUV420_DMA_U_EVEN, + YUV420_DMA_V_ODD, + YUV420_DMA_V_EVEN, + YUV420_DMA_Y_ODD_DOUBLING, + YUV420_DMA_U_ODD_DOUBLING, + YUV420_DMA_V_ODD_DOUBLING, + YUYV_DMA_ODD, + YUYV_DMA_EVEN, + YUYV_DMA_EVEN_DOUBLING, +}; + +/* Source and destination queue data */ +static struct deinterlace_q_data q_data[2]; + +static struct deinterlace_q_data *get_q_data(enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &q_data[V4L2_M2M_SRC]; + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &q_data[V4L2_M2M_DST]; + default: + BUG(); + } + return NULL; +} + +static struct deinterlace_fmt *find_format(struct v4l2_format *f) +{ + struct deinterlace_fmt *fmt; + unsigned int k; + + for (k = 0; k < NUM_FORMATS; k++) { + fmt = &formats[k]; + if ((fmt->types & f->type) && + (fmt->fourcc == f->fmt.pix.pixelformat)) + break; + } + + if (k == NUM_FORMATS) + return NULL; + + return &formats[k]; +} + +struct deinterlace_dev { + struct v4l2_device v4l2_dev; + struct video_device *vfd; + + atomic_t busy; + struct mutex dev_mutex; + spinlock_t irqlock; + + struct dma_chan *dma_chan; + + struct v4l2_m2m_dev *m2m_dev; + struct vb2_alloc_ctx *alloc_ctx; +}; + +struct deinterlace_ctx { + struct deinterlace_dev *dev; + + /* Abort requested by m2m */ + int aborting; + enum v4l2_colorspace colorspace; + dma_cookie_t cookie; + struct v4l2_m2m_ctx *m2m_ctx; + struct dma_interleaved_template *xt; +}; + +/* + * mem2mem callbacks + */ +static int deinterlace_job_ready(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_dev *pcdev = ctx->dev; + + if ((v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx) > 0) + && (v4l2_m2m_num_dst_bufs_ready(ctx->m2m_ctx) > 0) + && (atomic_read(&ctx->dev->busy) == 0)) { + dprintk(pcdev, "Task ready\n"); + return 1; + } + + dprintk(pcdev, "Task not ready to run\n"); + + return 0; +} + +static void deinterlace_job_abort(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_dev *pcdev = ctx->dev; + + ctx->aborting = 1; + + dprintk(pcdev, "Aborting task\n"); + + v4l2_m2m_job_finish(pcdev->m2m_dev, ctx->m2m_ctx); +} + +static void deinterlace_lock(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_dev *pcdev = ctx->dev; + mutex_lock(&pcdev->dev_mutex); +} + +static void deinterlace_unlock(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_dev *pcdev = ctx->dev; + mutex_unlock(&pcdev->dev_mutex); +} + +static void dma_callback(void *data) +{ + struct deinterlace_ctx *curr_ctx = data; + struct deinterlace_dev *pcdev = curr_ctx->dev; + struct vb2_buffer *src_vb, *dst_vb; + + atomic_set(&pcdev->busy, 0); + + src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->m2m_ctx); + + src_vb->v4l2_buf.timestamp = dst_vb->v4l2_buf.timestamp; + src_vb->v4l2_buf.timecode = dst_vb->v4l2_buf.timecode; + + v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE); + + v4l2_m2m_job_finish(pcdev->m2m_dev, curr_ctx->m2m_ctx); + + dprintk(pcdev, "dma transfers completed.\n"); +} + +static void deinterlace_issue_dma(struct deinterlace_ctx *ctx, int op, + int do_callback) +{ + struct deinterlace_q_data *s_q_data; + struct vb2_buffer *src_buf, *dst_buf; + struct deinterlace_dev *pcdev = ctx->dev; + struct dma_chan *chan = pcdev->dma_chan; + struct dma_device *dmadev = chan->device; + struct dma_async_tx_descriptor *tx; + unsigned int s_width, s_height; + unsigned int s_size; + dma_addr_t p_in, p_out; + enum dma_ctrl_flags flags; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + + s_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT); + s_width = s_q_data->width; + s_height = s_q_data->height; + s_size = s_width * s_height; + + p_in = (dma_addr_t)vb2_dma_contig_plane_dma_addr(src_buf, 0); + p_out = (dma_addr_t)vb2_dma_contig_plane_dma_addr(dst_buf, 0); + if (!p_in || !p_out) { + v4l2_err(&pcdev->v4l2_dev, + "Acquiring kernel pointers to buffers failed\n"); + return; + } + + switch (op) { + case YUV420_DMA_Y_ODD: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width; + ctx->xt->sgl[0].icg = s_width; + ctx->xt->src_start = p_in; + ctx->xt->dst_start = p_out; + break; + case YUV420_DMA_Y_EVEN: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width; + ctx->xt->sgl[0].icg = s_width; + ctx->xt->src_start = p_in + s_size / 2; + ctx->xt->dst_start = p_out + s_width; + break; + case YUV420_DMA_U_ODD: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + s_size; + ctx->xt->dst_start = p_out + s_size; + break; + case YUV420_DMA_U_EVEN: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + (9 * s_size) / 8; + ctx->xt->dst_start = p_out + s_size + s_width / 2; + break; + case YUV420_DMA_V_ODD: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + (5 * s_size) / 4; + ctx->xt->dst_start = p_out + (5 * s_size) / 4; + break; + case YUV420_DMA_V_EVEN: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + (11 * s_size) / 8; + ctx->xt->dst_start = p_out + (5 * s_size) / 4 + s_width / 2; + break; + case YUV420_DMA_Y_ODD_DOUBLING: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width; + ctx->xt->sgl[0].icg = s_width; + ctx->xt->src_start = p_in; + ctx->xt->dst_start = p_out + s_width; + break; + case YUV420_DMA_U_ODD_DOUBLING: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + s_size; + ctx->xt->dst_start = p_out + s_size + s_width / 2; + break; + case YUV420_DMA_V_ODD_DOUBLING: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + (5 * s_size) / 4; + ctx->xt->dst_start = p_out + (5 * s_size) / 4 + s_width / 2; + break; + case YUYV_DMA_ODD: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width * 2; + ctx->xt->sgl[0].icg = s_width * 2; + ctx->xt->src_start = p_in; + ctx->xt->dst_start = p_out; + break; + case YUYV_DMA_EVEN: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width * 2; + ctx->xt->sgl[0].icg = s_width * 2; + ctx->xt->src_start = p_in + s_size; + ctx->xt->dst_start = p_out + s_width * 2; + break; + case YUYV_DMA_EVEN_DOUBLING: + default: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width * 2; + ctx->xt->sgl[0].icg = s_width * 2; + ctx->xt->src_start = p_in; + ctx->xt->dst_start = p_out + s_width * 2; + break; + } + + /* Common parameters for al transfers */ + ctx->xt->frame_size = 1; + ctx->xt->dir = DMA_MEM_TO_MEM; + ctx->xt->src_sgl = false; + ctx->xt->dst_sgl = true; + flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT | + DMA_COMPL_SKIP_DEST_UNMAP | DMA_COMPL_SKIP_SRC_UNMAP; + + tx = dmadev->device_prep_interleaved_dma(chan, ctx->xt, flags); + if (tx == NULL) { + v4l2_warn(&pcdev->v4l2_dev, "DMA interleaved prep error\n"); + return; + } + + if (do_callback) { + tx->callback = dma_callback; + tx->callback_param = ctx; + } + + ctx->cookie = dmaengine_submit(tx); + if (dma_submit_error(ctx->cookie)) { + v4l2_warn(&pcdev->v4l2_dev, + "DMA submit error %d with src=0x%x dst=0x%x len=0x%x\n", + ctx->cookie, (unsigned)p_in, (unsigned)p_out, + s_size * 3/2); + return; + } + + dma_async_issue_pending(chan); +} + +static void deinterlace_device_run(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_q_data *dst_q_data; + + atomic_set(&ctx->dev->busy, 1); + + dprintk(ctx->dev, "%s: DMA try issue.\n", __func__); + + dst_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_CAPTURE); + + /* + * 4 possible field conversions are possible at the moment: + * V4L2_FIELD_SEQ_TB --> V4L2_FIELD_INTERLACED_TB: + * two separate fields in the same input buffer are interlaced + * in the output buffer using weaving. Top field comes first. + * V4L2_FIELD_SEQ_TB --> V4L2_FIELD_NONE: + * top field from the input buffer is copied to the output buffer + * using line doubling. Bottom field from the input buffer is discarded. + * V4L2_FIELD_SEQ_BT --> V4L2_FIELD_INTERLACED_BT: + * two separate fields in the same input buffer are interlaced + * in the output buffer using weaving. Bottom field comes first. + * V4L2_FIELD_SEQ_BT --> V4L2_FIELD_NONE: + * bottom field from the input buffer is copied to the output buffer + * using line doubling. Top field from the input buffer is discarded. + */ + switch (dst_q_data->fmt->fourcc) { + case V4L2_PIX_FMT_YUV420: + switch (dst_q_data->field) { + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + dprintk(ctx->dev, "%s: yuv420 interlaced tb.\n", + __func__); + deinterlace_issue_dma(ctx, YUV420_DMA_Y_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_Y_EVEN, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_U_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_U_EVEN, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_V_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_V_EVEN, 1); + break; + case V4L2_FIELD_NONE: + default: + dprintk(ctx->dev, "%s: yuv420 interlaced line doubling.\n", + __func__); + deinterlace_issue_dma(ctx, YUV420_DMA_Y_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_Y_ODD_DOUBLING, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_U_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_U_ODD_DOUBLING, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_V_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_V_ODD_DOUBLING, 1); + break; + } + break; + case V4L2_PIX_FMT_YUYV: + default: + switch (dst_q_data->field) { + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + dprintk(ctx->dev, "%s: yuyv interlaced_tb.\n", + __func__); + deinterlace_issue_dma(ctx, YUYV_DMA_ODD, 0); + deinterlace_issue_dma(ctx, YUYV_DMA_EVEN, 1); + break; + case V4L2_FIELD_NONE: + default: + dprintk(ctx->dev, "%s: yuyv interlaced line doubling.\n", + __func__); + deinterlace_issue_dma(ctx, YUYV_DMA_ODD, 0); + deinterlace_issue_dma(ctx, YUYV_DMA_EVEN_DOUBLING, 1); + break; + } + break; + } + + dprintk(ctx->dev, "%s: DMA issue done.\n", __func__); +} + +/* + * video ioctls + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver)); + strlcpy(cap->card, MEM2MEM_NAME, sizeof(cap->card)); + strlcpy(cap->bus_info, MEM2MEM_NAME, sizeof(cap->card)); + /* + * This is only a mem-to-mem video device. The capture and output + * device capability flags are left only for backward compatibility + * and are scheduled for removal. + */ + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | + V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + + return 0; +} + +static int enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + int i, num; + struct deinterlace_fmt *fmt; + + num = 0; + + for (i = 0; i < NUM_FORMATS; ++i) { + if (formats[i].types & type) { + /* index-th format of type type found ? */ + if (num == f->index) + break; + /* Correct type but haven't reached our index yet, + * just increment per-type index */ + ++num; + } + } + + if (i < NUM_FORMATS) { + /* Format found */ + fmt = &formats[i]; + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; + return 0; + } + + /* Format not found */ + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_CAPTURE); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_OUTPUT); +} + +static int vidioc_g_fmt(struct deinterlace_ctx *ctx, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct deinterlace_q_data *q_data; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(f->type); + + f->fmt.pix.width = q_data->width; + f->fmt.pix.height = q_data->height; + f->fmt.pix.field = q_data->field; + f->fmt.pix.pixelformat = q_data->fmt->fourcc; + + switch (q_data->fmt->fourcc) { + case V4L2_PIX_FMT_YUV420: + f->fmt.pix.bytesperline = q_data->width * 3 / 2; + break; + case V4L2_PIX_FMT_YUYV: + default: + f->fmt.pix.bytesperline = q_data->width * 2; + } + + f->fmt.pix.sizeimage = q_data->sizeimage; + f->fmt.pix.colorspace = ctx->colorspace; + + return 0; +} + +static int vidioc_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_try_fmt(struct v4l2_format *f, struct deinterlace_fmt *fmt) +{ + switch (f->fmt.pix.pixelformat) { + case V4L2_PIX_FMT_YUV420: + f->fmt.pix.bytesperline = f->fmt.pix.width * 3 / 2; + break; + case V4L2_PIX_FMT_YUYV: + default: + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + } + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct deinterlace_fmt *fmt; + struct deinterlace_ctx *ctx = priv; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_CAPTURE)) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420; + + f->fmt.pix.colorspace = ctx->colorspace; + + if (f->fmt.pix.field != V4L2_FIELD_INTERLACED_TB && + f->fmt.pix.field != V4L2_FIELD_INTERLACED_BT && + f->fmt.pix.field != V4L2_FIELD_NONE) + f->fmt.pix.field = V4L2_FIELD_INTERLACED_TB; + + return vidioc_try_fmt(f, fmt); +} + +static int vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct deinterlace_fmt *fmt; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_OUTPUT)) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420; + + if (!f->fmt.pix.colorspace) + f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709; + + if (f->fmt.pix.field != V4L2_FIELD_SEQ_TB && + f->fmt.pix.field != V4L2_FIELD_SEQ_BT) + f->fmt.pix.field = V4L2_FIELD_SEQ_TB; + + return vidioc_try_fmt(f, fmt); +} + +static int vidioc_s_fmt(struct deinterlace_ctx *ctx, struct v4l2_format *f) +{ + struct deinterlace_q_data *q_data; + struct vb2_queue *vq; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(f->type); + if (!q_data) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + q_data->fmt = find_format(f); + if (!q_data->fmt) { + v4l2_err(&ctx->dev->v4l2_dev, + "Couldn't set format type %d, wxh: %dx%d. fmt: %d, field: %d\n", + f->type, f->fmt.pix.width, f->fmt.pix.height, + f->fmt.pix.pixelformat, f->fmt.pix.field); + return -EINVAL; + } + + q_data->width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; + q_data->field = f->fmt.pix.field; + + switch (f->fmt.pix.pixelformat) { + case V4L2_PIX_FMT_YUV420: + f->fmt.pix.bytesperline = f->fmt.pix.width * 3 / 2; + q_data->sizeimage = (q_data->width * q_data->height * 3) / 2; + break; + case V4L2_PIX_FMT_YUYV: + default: + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + q_data->sizeimage = q_data->width * q_data->height * 2; + } + + dprintk(ctx->dev, + "Setting format for type %d, wxh: %dx%d, fmt: %d, field: %d\n", + f->type, q_data->width, q_data->height, q_data->fmt->fourcc, + q_data->field); + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + return vidioc_s_fmt(priv, f); +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct deinterlace_ctx *ctx = priv; + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); + if (ret) + return ret; + + ret = vidioc_s_fmt(priv, f); + if (!ret) + ctx->colorspace = f->fmt.pix.colorspace; + + return ret; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct deinterlace_q_data *s_q_data, *d_q_data; + struct deinterlace_ctx *ctx = priv; + + s_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT); + d_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_CAPTURE); + + /* Check that src and dst queues have the same pix format */ + if (s_q_data->fmt->fourcc != d_q_data->fmt->fourcc) { + v4l2_err(&ctx->dev->v4l2_dev, + "src and dst formats don't match.\n"); + return -EINVAL; + } + + /* Check that input and output deinterlacing types are compatible */ + switch (s_q_data->field) { + case V4L2_FIELD_SEQ_BT: + if (d_q_data->field != V4L2_FIELD_NONE && + d_q_data->field != V4L2_FIELD_INTERLACED_BT) { + v4l2_err(&ctx->dev->v4l2_dev, + "src and dst field conversion [(%d)->(%d)] not supported.\n", + s_q_data->field, d_q_data->field); + return -EINVAL; + } + break; + case V4L2_FIELD_SEQ_TB: + if (d_q_data->field != V4L2_FIELD_NONE && + d_q_data->field != V4L2_FIELD_INTERLACED_TB) { + v4l2_err(&ctx->dev->v4l2_dev, + "src and dst field conversion [(%d)->(%d)] not supported.\n", + s_q_data->field, d_q_data->field); + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static const struct v4l2_ioctl_ops deinterlace_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, + .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + + +/* + * Queue operations + */ +struct vb2_dc_conf { + struct device *dev; +}; + +static int deinterlace_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq); + struct deinterlace_q_data *q_data; + unsigned int size, count = *nbuffers; + + q_data = get_q_data(vq->type); + + switch (q_data->fmt->fourcc) { + case V4L2_PIX_FMT_YUV420: + size = q_data->width * q_data->height * 3 / 2; + break; + case V4L2_PIX_FMT_YUYV: + default: + size = q_data->width * q_data->height * 2; + } + + *nplanes = 1; + *nbuffers = count; + sizes[0] = size; + + alloc_ctxs[0] = ctx->dev->alloc_ctx; + + dprintk(ctx->dev, "get %d buffer(s) of size %d each.\n", count, size); + + return 0; +} + +static int deinterlace_buf_prepare(struct vb2_buffer *vb) +{ + struct deinterlace_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct deinterlace_q_data *q_data; + + dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); + + q_data = get_q_data(vb->vb2_queue->type); + + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), (long)q_data->sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + + return 0; +} + +static void deinterlace_buf_queue(struct vb2_buffer *vb) +{ + struct deinterlace_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static struct vb2_ops deinterlace_qops = { + .queue_setup = deinterlace_queue_setup, + .buf_prepare = deinterlace_buf_prepare, + .buf_queue = deinterlace_buf_queue, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct deinterlace_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &deinterlace_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + q_data[V4L2_M2M_SRC].fmt = &formats[0]; + q_data[V4L2_M2M_SRC].width = 640; + q_data[V4L2_M2M_SRC].height = 480; + q_data[V4L2_M2M_SRC].sizeimage = (640 * 480 * 3) / 2; + q_data[V4L2_M2M_SRC].field = V4L2_FIELD_SEQ_TB; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &deinterlace_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + q_data[V4L2_M2M_DST].fmt = &formats[0]; + q_data[V4L2_M2M_DST].width = 640; + q_data[V4L2_M2M_DST].height = 480; + q_data[V4L2_M2M_DST].sizeimage = (640 * 480 * 3) / 2; + q_data[V4L2_M2M_SRC].field = V4L2_FIELD_INTERLACED_TB; + + return vb2_queue_init(dst_vq); +} + +/* + * File operations + */ +static int deinterlace_open(struct file *file) +{ + struct deinterlace_dev *pcdev = video_drvdata(file); + struct deinterlace_ctx *ctx = NULL; + + ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + file->private_data = ctx; + ctx->dev = pcdev; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(pcdev->m2m_dev, ctx, &queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + int ret = PTR_ERR(ctx->m2m_ctx); + + kfree(ctx); + return ret; + } + + ctx->xt = kzalloc(sizeof(struct dma_async_tx_descriptor) + + sizeof(struct data_chunk), GFP_KERNEL); + if (!ctx->xt) { + kfree(ctx); + return -ENOMEM; + } + + ctx->colorspace = V4L2_COLORSPACE_REC709; + + dprintk(pcdev, "Created instance %p, m2m_ctx: %p\n", ctx, ctx->m2m_ctx); + + return 0; +} + +static int deinterlace_release(struct file *file) +{ + struct deinterlace_dev *pcdev = video_drvdata(file); + struct deinterlace_ctx *ctx = file->private_data; + + dprintk(pcdev, "Releasing instance %p\n", ctx); + + v4l2_m2m_ctx_release(ctx->m2m_ctx); + kfree(ctx->xt); + kfree(ctx); + + return 0; +} + +static unsigned int deinterlace_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct deinterlace_ctx *ctx = file->private_data; + int ret; + + deinterlace_lock(ctx); + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + deinterlace_unlock(ctx); + + return ret; +} + +static int deinterlace_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct deinterlace_ctx *ctx = file->private_data; + + return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); +} + +static const struct v4l2_file_operations deinterlace_fops = { + .owner = THIS_MODULE, + .open = deinterlace_open, + .release = deinterlace_release, + .poll = deinterlace_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = deinterlace_mmap, +}; + +static struct video_device deinterlace_videodev = { + .name = MEM2MEM_NAME, + .fops = &deinterlace_fops, + .ioctl_ops = &deinterlace_ioctl_ops, + .minor = -1, + .release = video_device_release, + .vfl_dir = VFL_DIR_M2M, +}; + +static struct v4l2_m2m_ops m2m_ops = { + .device_run = deinterlace_device_run, + .job_ready = deinterlace_job_ready, + .job_abort = deinterlace_job_abort, + .lock = deinterlace_lock, + .unlock = deinterlace_unlock, +}; + +static int deinterlace_probe(struct platform_device *pdev) +{ + struct deinterlace_dev *pcdev; + struct video_device *vfd; + dma_cap_mask_t mask; + int ret = 0; + + pcdev = kzalloc(sizeof *pcdev, GFP_KERNEL); + if (!pcdev) + return -ENOMEM; + + spin_lock_init(&pcdev->irqlock); + + dma_cap_zero(mask); + dma_cap_set(DMA_INTERLEAVE, mask); + pcdev->dma_chan = dma_request_channel(mask, NULL, pcdev); + if (!pcdev->dma_chan) + goto free_dev; + + if (!dma_has_cap(DMA_INTERLEAVE, pcdev->dma_chan->device->cap_mask)) { + v4l2_err(&pcdev->v4l2_dev, "DMA does not support INTERLEAVE\n"); + goto rel_dma; + } + + ret = v4l2_device_register(&pdev->dev, &pcdev->v4l2_dev); + if (ret) + goto rel_dma; + + atomic_set(&pcdev->busy, 0); + mutex_init(&pcdev->dev_mutex); + + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&pcdev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto unreg_dev; + } + + *vfd = deinterlace_videodev; + vfd->lock = &pcdev->dev_mutex; + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&pcdev->v4l2_dev, "Failed to register video device\n"); + goto rel_vdev; + } + + video_set_drvdata(vfd, pcdev); + snprintf(vfd->name, sizeof(vfd->name), "%s", deinterlace_videodev.name); + pcdev->vfd = vfd; + v4l2_info(&pcdev->v4l2_dev, MEM2MEM_TEST_MODULE_NAME + " Device registered as /dev/video%d\n", vfd->num); + + platform_set_drvdata(pdev, pcdev); + + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to alloc vb2 context\n"); + ret = PTR_ERR(pcdev->alloc_ctx); + goto err_ctx; + } + + pcdev->m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(pcdev->m2m_dev)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(pcdev->m2m_dev); + goto err_m2m; + } + + return 0; + + v4l2_m2m_release(pcdev->m2m_dev); +err_m2m: + video_unregister_device(pcdev->vfd); +err_ctx: + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); +rel_vdev: + video_device_release(vfd); +unreg_dev: + v4l2_device_unregister(&pcdev->v4l2_dev); +rel_dma: + dma_release_channel(pcdev->dma_chan); +free_dev: + kfree(pcdev); + + return ret; +} + +static int deinterlace_remove(struct platform_device *pdev) +{ + struct deinterlace_dev *pcdev = + (struct deinterlace_dev *)platform_get_drvdata(pdev); + + v4l2_info(&pcdev->v4l2_dev, "Removing " MEM2MEM_TEST_MODULE_NAME); + v4l2_m2m_release(pcdev->m2m_dev); + video_unregister_device(pcdev->vfd); + v4l2_device_unregister(&pcdev->v4l2_dev); + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); + dma_release_channel(pcdev->dma_chan); + kfree(pcdev); + + return 0; +} + +static struct platform_driver deinterlace_pdrv = { + .probe = deinterlace_probe, + .remove = deinterlace_remove, + .driver = { + .name = MEM2MEM_NAME, + .owner = THIS_MODULE, + }, +}; +module_platform_driver(deinterlace_pdrv); + diff --git a/drivers/media/platform/marvell-ccic/Kconfig b/drivers/media/platform/marvell-ccic/Kconfig new file mode 100644 index 00000000..bf739e3b --- /dev/null +++ b/drivers/media/platform/marvell-ccic/Kconfig @@ -0,0 +1,23 @@ +config VIDEO_CAFE_CCIC + tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support" + depends on PCI && I2C && VIDEO_V4L2 + select VIDEO_OV7670 + select VIDEOBUF2_VMALLOC + select VIDEOBUF2_DMA_CONTIG + ---help--- + This is a video4linux2 driver for the Marvell 88ALP01 integrated + CMOS camera controller. This is the controller found on first- + generation OLPC systems. + +config VIDEO_MMP_CAMERA + tristate "Marvell Armada 610 integrated camera controller support" + depends on ARCH_MMP && I2C && VIDEO_V4L2 + select VIDEO_OV7670 + select I2C_GPIO + select VIDEOBUF2_DMA_SG + ---help--- + This is a Video4Linux2 driver for the integrated camera + controller found on Marvell Armada 610 application + processors (and likely beyond). This is the controller found + in OLPC XO 1.75 systems. + diff --git a/drivers/media/platform/marvell-ccic/Makefile b/drivers/media/platform/marvell-ccic/Makefile new file mode 100644 index 00000000..05a792c5 --- /dev/null +++ b/drivers/media/platform/marvell-ccic/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o +cafe_ccic-y := cafe-driver.o mcam-core.o + +obj-$(CONFIG_VIDEO_MMP_CAMERA) += mmp_camera.o +mmp_camera-y := mmp-driver.o mcam-core.o + diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c new file mode 100644 index 00000000..d030f9be --- /dev/null +++ b/drivers/media/platform/marvell-ccic/cafe-driver.c @@ -0,0 +1,654 @@ +/* + * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe" + * multifunction chip. Currently works with the Omnivision OV7670 + * sensor. + * + * The data sheet for this device can be found at: + * http://www.marvell.com/products/pc_connectivity/88alp01/ + * + * Copyright 2006-11 One Laptop Per Child Association, Inc. + * Copyright 2006-11 Jonathan Corbet + * + * Written by Jonathan Corbet, corbet@lwn.net. + * + * v4l2_device/v4l2_subdev conversion by: + * Copyright (C) 2009 Hans Verkuil + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mcam-core.h" + +#define CAFE_VERSION 0x000002 + + +/* + * Parameters. + */ +MODULE_AUTHOR("Jonathan Corbet "); +MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("Video"); + + + + +struct cafe_camera { + int registered; /* Fully initialized? */ + struct mcam_camera mcam; + struct pci_dev *pdev; + wait_queue_head_t smbus_wait; /* Waiting on i2c events */ +}; + +/* + * Most of the camera controller registers are defined in mcam-core.h, + * but the Cafe platform has some additional registers of its own; + * they are described here. + */ + +/* + * "General purpose register" has a couple of GPIOs used for sensor + * power and reset on OLPC XO 1.0 systems. + */ +#define REG_GPR 0xb4 +#define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */ +#define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */ +#define GPR_C1 0x00000002 /* Control 1 value */ +/* + * Control 0 is wired to reset on OLPC machines. For ov7x sensors, + * it is active low. + */ +#define GPR_C0 0x00000001 /* Control 0 value */ + +/* + * These registers control the SMBUS module for communicating + * with the sensor. + */ +#define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */ +#define TWSIC0_EN 0x00000001 /* TWSI enable */ +#define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */ +#define TWSIC0_SID 0x000003fc /* Slave ID */ +/* + * Subtle trickery: the slave ID field starts with bit 2. But the + * Linux i2c stack wants to treat the bottommost bit as a separate + * read/write bit, which is why slave ID's are usually presented + * >>1. For consistency with that behavior, we shift over three + * bits instead of two. + */ +#define TWSIC0_SID_SHIFT 3 +#define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */ +#define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */ +#define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */ + +#define REG_TWSIC1 0xbc /* TWSI control 1 */ +#define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */ +#define TWSIC1_ADDR 0x00ff0000 /* Address (register) */ +#define TWSIC1_ADDR_SHIFT 16 +#define TWSIC1_READ 0x01000000 /* Set for read op */ +#define TWSIC1_WSTAT 0x02000000 /* Write status */ +#define TWSIC1_RVALID 0x04000000 /* Read data valid */ +#define TWSIC1_ERROR 0x08000000 /* Something screwed up */ + +/* + * Here's the weird global control registers + */ +#define REG_GL_CSR 0x3004 /* Control/status register */ +#define GCSR_SRS 0x00000001 /* SW Reset set */ +#define GCSR_SRC 0x00000002 /* SW Reset clear */ +#define GCSR_MRS 0x00000004 /* Master reset set */ +#define GCSR_MRC 0x00000008 /* HW Reset clear */ +#define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */ +#define REG_GL_IMASK 0x300c /* Interrupt mask register */ +#define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */ + +#define REG_GL_FCR 0x3038 /* GPIO functional control register */ +#define GFCR_GPIO_ON 0x08 /* Camera GPIO enabled */ +#define REG_GL_GPIOR 0x315c /* GPIO register */ +#define GGPIO_OUT 0x80000 /* GPIO output */ +#define GGPIO_VAL 0x00008 /* Output pin value */ + +#define REG_LEN (REG_GL_IMASK + 4) + + +/* + * Debugging and related. + */ +#define cam_err(cam, fmt, arg...) \ + dev_err(&(cam)->pdev->dev, fmt, ##arg); +#define cam_warn(cam, fmt, arg...) \ + dev_warn(&(cam)->pdev->dev, fmt, ##arg); + +/* -------------------------------------------------------------------- */ +/* + * The I2C/SMBUS interface to the camera itself starts here. The + * controller handles SMBUS itself, presenting a relatively simple register + * interface; all we have to do is to tell it where to route the data. + */ +#define CAFE_SMBUS_TIMEOUT (HZ) /* generous */ + +static inline struct cafe_camera *to_cam(struct v4l2_device *dev) +{ + struct mcam_camera *m = container_of(dev, struct mcam_camera, v4l2_dev); + return container_of(m, struct cafe_camera, mcam); +} + + +static int cafe_smbus_write_done(struct mcam_camera *mcam) +{ + unsigned long flags; + int c1; + + /* + * We must delay after the interrupt, or the controller gets confused + * and never does give us good status. Fortunately, we don't do this + * often. + */ + udelay(20); + spin_lock_irqsave(&mcam->dev_lock, flags); + c1 = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT; +} + +static int cafe_smbus_write_data(struct cafe_camera *cam, + u16 addr, u8 command, u8 value) +{ + unsigned int rval; + unsigned long flags; + struct mcam_camera *mcam = &cam->mcam; + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); + rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ + /* + * Marvell sez set clkdiv to all 1's for now. + */ + rval |= TWSIC0_CLKDIV; + mcam_reg_write(mcam, REG_TWSIC0, rval); + (void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */ + rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + mcam_reg_write(mcam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + /* Unfortunately, reading TWSIC1 too soon after sending a command + * causes the device to die. + * Use a busy-wait because we often send a large quantity of small + * commands at-once; using msleep() would cause a lot of context + * switches which take longer than 2ms, resulting in a noticeable + * boot-time and capture-start delays. + */ + mdelay(2); + + /* + * Another sad fact is that sometimes, commands silently complete but + * cafe_smbus_write_done() never becomes aware of this. + * This happens at random and appears to possible occur with any + * command. + * We don't understand why this is. We work around this issue + * with the timeout in the wait below, assuming that all commands + * complete within the timeout. + */ + wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(mcam), + CAFE_SMBUS_TIMEOUT); + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + if (rval & TWSIC1_WSTAT) { + cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr, + command, value); + return -EIO; + } + if (rval & TWSIC1_ERROR) { + cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr, + command, value); + return -EIO; + } + return 0; +} + + + +static int cafe_smbus_read_done(struct mcam_camera *mcam) +{ + unsigned long flags; + int c1; + + /* + * We must delay after the interrupt, or the controller gets confused + * and never does give us good status. Fortunately, we don't do this + * often. + */ + udelay(20); + spin_lock_irqsave(&mcam->dev_lock, flags); + c1 = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + return c1 & (TWSIC1_RVALID|TWSIC1_ERROR); +} + + + +static int cafe_smbus_read_data(struct cafe_camera *cam, + u16 addr, u8 command, u8 *value) +{ + unsigned int rval; + unsigned long flags; + struct mcam_camera *mcam = &cam->mcam; + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); + rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ + /* + * Marvel sez set clkdiv to all 1's for now. + */ + rval |= TWSIC0_CLKDIV; + mcam_reg_write(mcam, REG_TWSIC0, rval); + (void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */ + rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + mcam_reg_write(mcam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + wait_event_timeout(cam->smbus_wait, + cafe_smbus_read_done(mcam), CAFE_SMBUS_TIMEOUT); + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + if (rval & TWSIC1_ERROR) { + cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command); + return -EIO; + } + if (!(rval & TWSIC1_RVALID)) { + cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr, + command); + return -EIO; + } + *value = rval & 0xff; + return 0; +} + +/* + * Perform a transfer over SMBUS. This thing is called under + * the i2c bus lock, so we shouldn't race with ourselves... + */ +static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char rw, u8 command, + int size, union i2c_smbus_data *data) +{ + struct cafe_camera *cam = i2c_get_adapdata(adapter); + int ret = -EINVAL; + + /* + * This interface would appear to only do byte data ops. OK + * it can do word too, but the cam chip has no use for that. + */ + if (size != I2C_SMBUS_BYTE_DATA) { + cam_err(cam, "funky xfer size %d\n", size); + return -EINVAL; + } + + if (rw == I2C_SMBUS_WRITE) + ret = cafe_smbus_write_data(cam, addr, command, data->byte); + else if (rw == I2C_SMBUS_READ) + ret = cafe_smbus_read_data(cam, addr, command, &data->byte); + return ret; +} + + +static void cafe_smbus_enable_irq(struct cafe_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->mcam.dev_lock, flags); + mcam_reg_set_bit(&cam->mcam, REG_IRQMASK, TWSIIRQS); + spin_unlock_irqrestore(&cam->mcam.dev_lock, flags); +} + +static u32 cafe_smbus_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA; +} + +static struct i2c_algorithm cafe_smbus_algo = { + .smbus_xfer = cafe_smbus_xfer, + .functionality = cafe_smbus_func +}; + +static int cafe_smbus_setup(struct cafe_camera *cam) +{ + struct i2c_adapter *adap; + int ret; + + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (adap == NULL) + return -ENOMEM; + cam->mcam.i2c_adapter = adap; + cafe_smbus_enable_irq(cam); + adap->owner = THIS_MODULE; + adap->algo = &cafe_smbus_algo; + strcpy(adap->name, "cafe_ccic"); + adap->dev.parent = &cam->pdev->dev; + i2c_set_adapdata(adap, cam); + ret = i2c_add_adapter(adap); + if (ret) + printk(KERN_ERR "Unable to register cafe i2c adapter\n"); + return ret; +} + +static void cafe_smbus_shutdown(struct cafe_camera *cam) +{ + i2c_del_adapter(cam->mcam.i2c_adapter); + kfree(cam->mcam.i2c_adapter); +} + + +/* + * Controller-level stuff + */ + +static void cafe_ctlr_init(struct mcam_camera *mcam) +{ + unsigned long flags; + + spin_lock_irqsave(&mcam->dev_lock, flags); + /* + * Added magic to bring up the hardware on the B-Test board + */ + mcam_reg_write(mcam, 0x3038, 0x8); + mcam_reg_write(mcam, 0x315c, 0x80008); + /* + * Go through the dance needed to wake the device up. + * Note that these registers are global and shared + * with the NAND and SD devices. Interaction between the + * three still needs to be examined. + */ + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */ + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRC); + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRS); + /* + * Here we must wait a bit for the controller to come around. + */ + spin_unlock_irqrestore(&mcam->dev_lock, flags); + msleep(5); + spin_lock_irqsave(&mcam->dev_lock, flags); + + mcam_reg_write(mcam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC); + mcam_reg_set_bit(mcam, REG_GL_IMASK, GIMSK_CCIC_EN); + /* + * Mask all interrupts. + */ + mcam_reg_write(mcam, REG_IRQMASK, 0); + spin_unlock_irqrestore(&mcam->dev_lock, flags); +} + + +static void cafe_ctlr_power_up(struct mcam_camera *mcam) +{ + /* + * Part one of the sensor dance: turn the global + * GPIO signal on. + */ + mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON); + mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL); + /* + * Put the sensor into operational mode (assumes OLPC-style + * wiring). Control 0 is reset - set to 1 to operate. + * Control 1 is power down, set to 0 to operate. + */ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0); +} + +static void cafe_ctlr_power_down(struct mcam_camera *mcam) +{ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1); + mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON); + mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT); +} + + + +/* + * The platform interrupt handler. + */ +static irqreturn_t cafe_irq(int irq, void *data) +{ + struct cafe_camera *cam = data; + struct mcam_camera *mcam = &cam->mcam; + unsigned int irqs, handled; + + spin_lock(&mcam->dev_lock); + irqs = mcam_reg_read(mcam, REG_IRQSTAT); + handled = cam->registered && mccic_irq(mcam, irqs); + if (irqs & TWSIIRQS) { + mcam_reg_write(mcam, REG_IRQSTAT, TWSIIRQS); + wake_up(&cam->smbus_wait); + handled = 1; + } + spin_unlock(&mcam->dev_lock); + return IRQ_RETVAL(handled); +} + + +/* -------------------------------------------------------------------------- */ +/* + * PCI interface stuff. + */ + +static int cafe_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + struct cafe_camera *cam; + struct mcam_camera *mcam; + + /* + * Start putting together one of our big camera structures. + */ + ret = -ENOMEM; + cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL); + if (cam == NULL) + goto out; + cam->pdev = pdev; + mcam = &cam->mcam; + mcam->chip_id = V4L2_IDENT_CAFE; + spin_lock_init(&mcam->dev_lock); + init_waitqueue_head(&cam->smbus_wait); + mcam->plat_power_up = cafe_ctlr_power_up; + mcam->plat_power_down = cafe_ctlr_power_down; + mcam->dev = &pdev->dev; + /* + * Set the clock speed for the XO 1; I don't believe this + * driver has ever run anywhere else. + */ + mcam->clock_speed = 45; + mcam->use_smbus = 1; + /* + * Vmalloc mode for buffers is traditional with this driver. + * We *might* be able to run DMA_contig, especially on a system + * with CMA in it. + */ + mcam->buffer_mode = B_vmalloc; + /* + * Get set up on the PCI bus. + */ + ret = pci_enable_device(pdev); + if (ret) + goto out_free; + pci_set_master(pdev); + + ret = -EIO; + mcam->regs = pci_iomap(pdev, 0, 0); + if (!mcam->regs) { + printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n"); + goto out_disable; + } + ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam); + if (ret) + goto out_iounmap; + + /* + * Initialize the controller and leave it powered up. It will + * stay that way until the sensor driver shows up. + */ + cafe_ctlr_init(mcam); + cafe_ctlr_power_up(mcam); + /* + * Set up I2C/SMBUS communications. We have to drop the mutex here + * because the sensor could attach in this call chain, leading to + * unsightly deadlocks. + */ + ret = cafe_smbus_setup(cam); + if (ret) + goto out_pdown; + + ret = mccic_register(mcam); + if (ret == 0) { + cam->registered = 1; + return 0; + } + + cafe_smbus_shutdown(cam); +out_pdown: + cafe_ctlr_power_down(mcam); + free_irq(pdev->irq, cam); +out_iounmap: + pci_iounmap(pdev, mcam->regs); +out_disable: + pci_disable_device(pdev); +out_free: + kfree(cam); +out: + return ret; +} + + +/* + * Shut down an initialized device + */ +static void cafe_shutdown(struct cafe_camera *cam) +{ + mccic_shutdown(&cam->mcam); + cafe_smbus_shutdown(cam); + free_irq(cam->pdev->irq, cam); + pci_iounmap(cam->pdev, cam->mcam.regs); +} + + +static void cafe_pci_remove(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + + if (cam == NULL) { + printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev); + return; + } + cafe_shutdown(cam); + kfree(cam); +} + + +#ifdef CONFIG_PM +/* + * Basic power management. + */ +static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + int ret; + + ret = pci_save_state(pdev); + if (ret) + return ret; + mccic_suspend(&cam->mcam); + pci_disable_device(pdev); + return 0; +} + + +static int cafe_pci_resume(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + int ret = 0; + + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + + if (ret) { + cam_warn(cam, "Unable to re-enable device on resume!\n"); + return ret; + } + cafe_ctlr_init(&cam->mcam); + return mccic_resume(&cam->mcam); +} + +#endif /* CONFIG_PM */ + +static struct pci_device_id cafe_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, + PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, cafe_ids); + +static struct pci_driver cafe_pci_driver = { + .name = "cafe1000-ccic", + .id_table = cafe_ids, + .probe = cafe_pci_probe, + .remove = cafe_pci_remove, +#ifdef CONFIG_PM + .suspend = cafe_pci_suspend, + .resume = cafe_pci_resume, +#endif +}; + + + + +static int __init cafe_init(void) +{ + int ret; + + printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n", + CAFE_VERSION); + ret = pci_register_driver(&cafe_pci_driver); + if (ret) { + printk(KERN_ERR "Unable to register cafe_ccic driver\n"); + goto out; + } + ret = 0; + +out: + return ret; +} + + +static void __exit cafe_exit(void) +{ + pci_unregister_driver(&cafe_pci_driver); +} + +module_init(cafe_init); +module_exit(cafe_exit); diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c new file mode 100644 index 00000000..64ab91ed --- /dev/null +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -0,0 +1,1838 @@ +/* + * The Marvell camera core. This device appears in a number of settings, + * so it needs platform-specific support outside of the core. + * + * Copyright 2011 Jonathan Corbet corbet@lwn.net + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mcam-core.h" + +#ifdef MCAM_MODE_VMALLOC +/* + * Internal DMA buffer management. Since the controller cannot do S/G I/O, + * we must have physically contiguous buffers to bring frames into. + * These parameters control how many buffers we use, whether we + * allocate them at load time (better chance of success, but nails down + * memory) or when somebody tries to use the camera (riskier), and, + * for load-time allocation, how big they should be. + * + * The controller can cycle through three buffers. We could use + * more by flipping pointers around, but it probably makes little + * sense. + */ + +static bool alloc_bufs_at_read; +module_param(alloc_bufs_at_read, bool, 0444); +MODULE_PARM_DESC(alloc_bufs_at_read, + "Non-zero value causes DMA buffers to be allocated when the " + "video capture device is read, rather than at module load " + "time. This saves memory, but decreases the chances of " + "successfully getting those buffers. This parameter is " + "only used in the vmalloc buffer mode"); + +static int n_dma_bufs = 3; +module_param(n_dma_bufs, uint, 0644); +MODULE_PARM_DESC(n_dma_bufs, + "The number of DMA buffers to allocate. Can be either two " + "(saves memory, makes timing tighter) or three."); + +static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2; /* Worst case */ +module_param(dma_buf_size, uint, 0444); +MODULE_PARM_DESC(dma_buf_size, + "The size of the allocated DMA buffers. If actual operating " + "parameters require larger buffers, an attempt to reallocate " + "will be made."); +#else /* MCAM_MODE_VMALLOC */ +static const bool alloc_bufs_at_read = 0; +static const int n_dma_bufs = 3; /* Used by S/G_PARM */ +#endif /* MCAM_MODE_VMALLOC */ + +static bool flip; +module_param(flip, bool, 0444); +MODULE_PARM_DESC(flip, + "If set, the sensor will be instructed to flip the image " + "vertically."); + +static int buffer_mode = -1; +module_param(buffer_mode, int, 0444); +MODULE_PARM_DESC(buffer_mode, + "Set the buffer mode to be used; default is to go with what " + "the platform driver asks for. Set to 0 for vmalloc, 1 for " + "DMA contiguous."); + +/* + * Status flags. Always manipulated with bit operations. + */ +#define CF_BUF0_VALID 0 /* Buffers valid - first three */ +#define CF_BUF1_VALID 1 +#define CF_BUF2_VALID 2 +#define CF_DMA_ACTIVE 3 /* A frame is incoming */ +#define CF_CONFIG_NEEDED 4 /* Must configure hardware */ +#define CF_SINGLE_BUFFER 5 /* Running with a single buffer */ +#define CF_SG_RESTART 6 /* SG restart needed */ + +#define sensor_call(cam, o, f, args...) \ + v4l2_subdev_call(cam->sensor, o, f, ##args) + +static struct mcam_format_struct { + __u8 *desc; + __u32 pixelformat; + int bpp; /* Bytes per pixel */ + enum v4l2_mbus_pixelcode mbus_code; +} mcam_formats[] = { + { + .desc = "YUYV 4:2:2", + .pixelformat = V4L2_PIX_FMT_YUYV, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .bpp = 2, + }, + { + .desc = "RGB 444", + .pixelformat = V4L2_PIX_FMT_RGB444, + .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, + .bpp = 2, + }, + { + .desc = "RGB 565", + .pixelformat = V4L2_PIX_FMT_RGB565, + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .bpp = 2, + }, + { + .desc = "Raw RGB Bayer", + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .mbus_code = V4L2_MBUS_FMT_SBGGR8_1X8, + .bpp = 1 + }, +}; +#define N_MCAM_FMTS ARRAY_SIZE(mcam_formats) + +static struct mcam_format_struct *mcam_find_format(u32 pixelformat) +{ + unsigned i; + + for (i = 0; i < N_MCAM_FMTS; i++) + if (mcam_formats[i].pixelformat == pixelformat) + return mcam_formats + i; + /* Not found? Then return the first format. */ + return mcam_formats; +} + +/* + * The default format we use until somebody says otherwise. + */ +static const struct v4l2_pix_format mcam_def_pix_format = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .pixelformat = V4L2_PIX_FMT_YUYV, + .field = V4L2_FIELD_NONE, + .bytesperline = VGA_WIDTH*2, + .sizeimage = VGA_WIDTH*VGA_HEIGHT*2, +}; + +static const enum v4l2_mbus_pixelcode mcam_def_mbus_code = + V4L2_MBUS_FMT_YUYV8_2X8; + + +/* + * The two-word DMA descriptor format used by the Armada 610 and like. There + * Is a three-word format as well (set C1_DESC_3WORD) where the third + * word is a pointer to the next descriptor, but we don't use it. Two-word + * descriptors have to be contiguous in memory. + */ +struct mcam_dma_desc { + u32 dma_addr; + u32 segment_len; +}; + +/* + * Our buffer type for working with videobuf2. Note that the vb2 + * developers have decreed that struct vb2_buffer must be at the + * beginning of this structure. + */ +struct mcam_vb_buffer { + struct vb2_buffer vb_buf; + struct list_head queue; + struct mcam_dma_desc *dma_desc; /* Descriptor virtual address */ + dma_addr_t dma_desc_pa; /* Descriptor physical address */ + int dma_desc_nent; /* Number of mapped descriptors */ +}; + +static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_buffer *vb) +{ + return container_of(vb, struct mcam_vb_buffer, vb_buf); +} + +/* + * Hand a completed buffer back to user space. + */ +static void mcam_buffer_done(struct mcam_camera *cam, int frame, + struct vb2_buffer *vbuf) +{ + vbuf->v4l2_buf.bytesused = cam->pix_format.sizeimage; + vbuf->v4l2_buf.sequence = cam->buf_seq[frame]; + vb2_set_plane_payload(vbuf, 0, cam->pix_format.sizeimage); + vb2_buffer_done(vbuf, VB2_BUF_STATE_DONE); +} + + + +/* + * Debugging and related. + */ +#define cam_err(cam, fmt, arg...) \ + dev_err((cam)->dev, fmt, ##arg); +#define cam_warn(cam, fmt, arg...) \ + dev_warn((cam)->dev, fmt, ##arg); +#define cam_dbg(cam, fmt, arg...) \ + dev_dbg((cam)->dev, fmt, ##arg); + + +/* + * Flag manipulation helpers + */ +static void mcam_reset_buffers(struct mcam_camera *cam) +{ + int i; + + cam->next_buf = -1; + for (i = 0; i < cam->nbufs; i++) + clear_bit(i, &cam->flags); +} + +static inline int mcam_needs_config(struct mcam_camera *cam) +{ + return test_bit(CF_CONFIG_NEEDED, &cam->flags); +} + +static void mcam_set_config_needed(struct mcam_camera *cam, int needed) +{ + if (needed) + set_bit(CF_CONFIG_NEEDED, &cam->flags); + else + clear_bit(CF_CONFIG_NEEDED, &cam->flags); +} + +/* ------------------------------------------------------------------- */ +/* + * Make the controller start grabbing images. Everything must + * be set up before doing this. + */ +static void mcam_ctlr_start(struct mcam_camera *cam) +{ + /* set_bit performs a read, so no other barrier should be + needed here */ + mcam_reg_set_bit(cam, REG_CTRL0, C0_ENABLE); +} + +static void mcam_ctlr_stop(struct mcam_camera *cam) +{ + mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); +} + +/* ------------------------------------------------------------------- */ + +#ifdef MCAM_MODE_VMALLOC +/* + * Code specific to the vmalloc buffer mode. + */ + +/* + * Allocate in-kernel DMA buffers for vmalloc mode. + */ +static int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime) +{ + int i; + + mcam_set_config_needed(cam, 1); + if (loadtime) + cam->dma_buf_size = dma_buf_size; + else + cam->dma_buf_size = cam->pix_format.sizeimage; + if (n_dma_bufs > 3) + n_dma_bufs = 3; + + cam->nbufs = 0; + for (i = 0; i < n_dma_bufs; i++) { + cam->dma_bufs[i] = dma_alloc_coherent(cam->dev, + cam->dma_buf_size, cam->dma_handles + i, + GFP_KERNEL); + if (cam->dma_bufs[i] == NULL) { + cam_warn(cam, "Failed to allocate DMA buffer\n"); + break; + } + (cam->nbufs)++; + } + + switch (cam->nbufs) { + case 1: + dma_free_coherent(cam->dev, cam->dma_buf_size, + cam->dma_bufs[0], cam->dma_handles[0]); + cam->nbufs = 0; + case 0: + cam_err(cam, "Insufficient DMA buffers, cannot operate\n"); + return -ENOMEM; + + case 2: + if (n_dma_bufs > 2) + cam_warn(cam, "Will limp along with only 2 buffers\n"); + break; + } + return 0; +} + +static void mcam_free_dma_bufs(struct mcam_camera *cam) +{ + int i; + + for (i = 0; i < cam->nbufs; i++) { + dma_free_coherent(cam->dev, cam->dma_buf_size, + cam->dma_bufs[i], cam->dma_handles[i]); + cam->dma_bufs[i] = NULL; + } + cam->nbufs = 0; +} + + +/* + * Set up DMA buffers when operating in vmalloc mode + */ +static void mcam_ctlr_dma_vmalloc(struct mcam_camera *cam) +{ + /* + * Store the first two Y buffers (we aren't supporting + * planar formats for now, so no UV bufs). Then either + * set the third if it exists, or tell the controller + * to just use two. + */ + mcam_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]); + mcam_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]); + if (cam->nbufs > 2) { + mcam_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]); + mcam_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS); + } else + mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS); + if (cam->chip_id == V4L2_IDENT_CAFE) + mcam_reg_write(cam, REG_UBAR, 0); /* 32 bits only */ +} + +/* + * Copy data out to user space in the vmalloc case + */ +static void mcam_frame_tasklet(unsigned long data) +{ + struct mcam_camera *cam = (struct mcam_camera *) data; + int i; + unsigned long flags; + struct mcam_vb_buffer *buf; + + spin_lock_irqsave(&cam->dev_lock, flags); + for (i = 0; i < cam->nbufs; i++) { + int bufno = cam->next_buf; + + if (cam->state != S_STREAMING || bufno < 0) + break; /* I/O got stopped */ + if (++(cam->next_buf) >= cam->nbufs) + cam->next_buf = 0; + if (!test_bit(bufno, &cam->flags)) + continue; + if (list_empty(&cam->buffers)) { + cam->frame_state.singles++; + break; /* Leave it valid, hope for better later */ + } + cam->frame_state.delivered++; + clear_bit(bufno, &cam->flags); + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, + queue); + list_del_init(&buf->queue); + /* + * Drop the lock during the big copy. This *should* be safe... + */ + spin_unlock_irqrestore(&cam->dev_lock, flags); + memcpy(vb2_plane_vaddr(&buf->vb_buf, 0), cam->dma_bufs[bufno], + cam->pix_format.sizeimage); + mcam_buffer_done(cam, bufno, &buf->vb_buf); + spin_lock_irqsave(&cam->dev_lock, flags); + } + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + + +/* + * Make sure our allocated buffers are up to the task. + */ +static int mcam_check_dma_buffers(struct mcam_camera *cam) +{ + if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage) + mcam_free_dma_bufs(cam); + if (cam->nbufs == 0) + return mcam_alloc_dma_bufs(cam, 0); + return 0; +} + +static void mcam_vmalloc_done(struct mcam_camera *cam, int frame) +{ + tasklet_schedule(&cam->s_tasklet); +} + +#else /* MCAM_MODE_VMALLOC */ + +static inline int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime) +{ + return 0; +} + +static inline void mcam_free_dma_bufs(struct mcam_camera *cam) +{ + return; +} + +static inline int mcam_check_dma_buffers(struct mcam_camera *cam) +{ + return 0; +} + + + +#endif /* MCAM_MODE_VMALLOC */ + + +#ifdef MCAM_MODE_DMA_CONTIG +/* ---------------------------------------------------------------------- */ +/* + * DMA-contiguous code. + */ +/* + * Set up a contiguous buffer for the given frame. Here also is where + * the underrun strategy is set: if there is no buffer available, reuse + * the buffer from the other BAR and set the CF_SINGLE_BUFFER flag to + * keep the interrupt handler from giving that buffer back to user + * space. In this way, we always have a buffer to DMA to and don't + * have to try to play games stopping and restarting the controller. + */ +static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf; + /* + * If there are no available buffers, go into single mode + */ + if (list_empty(&cam->buffers)) { + buf = cam->vb_bufs[frame ^ 0x1]; + cam->vb_bufs[frame] = buf; + mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, + vb2_dma_contig_plane_dma_addr(&buf->vb_buf, 0)); + set_bit(CF_SINGLE_BUFFER, &cam->flags); + cam->frame_state.singles++; + return; + } + /* + * OK, we have a buffer we can use. + */ + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue); + list_del_init(&buf->queue); + mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, + vb2_dma_contig_plane_dma_addr(&buf->vb_buf, 0)); + cam->vb_bufs[frame] = buf; + clear_bit(CF_SINGLE_BUFFER, &cam->flags); +} + +/* + * Initial B_DMA_contig setup. + */ +static void mcam_ctlr_dma_contig(struct mcam_camera *cam) +{ + mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS); + cam->nbufs = 2; + mcam_set_contig_buffer(cam, 0); + mcam_set_contig_buffer(cam, 1); +} + +/* + * Frame completion handling. + */ +static void mcam_dma_contig_done(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf = cam->vb_bufs[frame]; + + if (!test_bit(CF_SINGLE_BUFFER, &cam->flags)) { + cam->frame_state.delivered++; + mcam_buffer_done(cam, frame, &buf->vb_buf); + } + mcam_set_contig_buffer(cam, frame); +} + +#endif /* MCAM_MODE_DMA_CONTIG */ + +#ifdef MCAM_MODE_DMA_SG +/* ---------------------------------------------------------------------- */ +/* + * Scatter/gather-specific code. + */ + +/* + * Set up the next buffer for S/G I/O; caller should be sure that + * the controller is stopped and a buffer is available. + */ +static void mcam_sg_next_buffer(struct mcam_camera *cam) +{ + struct mcam_vb_buffer *buf; + + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue); + list_del_init(&buf->queue); + /* + * Very Bad Not Good Things happen if you don't clear + * C1_DESC_ENA before making any descriptor changes. + */ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA); + mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa); + mcam_reg_write(cam, REG_DESC_LEN_Y, + buf->dma_desc_nent*sizeof(struct mcam_dma_desc)); + mcam_reg_write(cam, REG_DESC_LEN_U, 0); + mcam_reg_write(cam, REG_DESC_LEN_V, 0); + mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); + cam->vb_bufs[0] = buf; +} + +/* + * Initial B_DMA_sg setup + */ +static void mcam_ctlr_dma_sg(struct mcam_camera *cam) +{ + /* + * The list-empty condition can hit us at resume time + * if the buffer list was empty when the system was suspended. + */ + if (list_empty(&cam->buffers)) { + set_bit(CF_SG_RESTART, &cam->flags); + return; + } + + mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_3WORD); + mcam_sg_next_buffer(cam); + cam->nbufs = 3; +} + + +/* + * Frame completion with S/G is trickier. We can't muck with + * a descriptor chain on the fly, since the controller buffers it + * internally. So we have to actually stop and restart; Marvell + * says this is the way to do it. + * + * Of course, stopping is easier said than done; experience shows + * that the controller can start a frame *after* C0_ENABLE has been + * cleared. So when running in S/G mode, the controller is "stopped" + * on receipt of the start-of-frame interrupt. That means we can + * safely change the DMA descriptor array here and restart things + * (assuming there's another buffer waiting to go). + */ +static void mcam_dma_sg_done(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf = cam->vb_bufs[0]; + + /* + * If we're no longer supposed to be streaming, don't do anything. + */ + if (cam->state != S_STREAMING) + return; + /* + * If we have another buffer available, put it in and + * restart the engine. + */ + if (!list_empty(&cam->buffers)) { + mcam_sg_next_buffer(cam); + mcam_ctlr_start(cam); + /* + * Otherwise set CF_SG_RESTART and the controller will + * be restarted once another buffer shows up. + */ + } else { + set_bit(CF_SG_RESTART, &cam->flags); + cam->frame_state.singles++; + cam->vb_bufs[0] = NULL; + } + /* + * Now we can give the completed frame back to user space. + */ + cam->frame_state.delivered++; + mcam_buffer_done(cam, frame, &buf->vb_buf); +} + + +/* + * Scatter/gather mode requires stopping the controller between + * frames so we can put in a new DMA descriptor array. If no new + * buffer exists at frame completion, the controller is left stopped; + * this function is charged with gettig things going again. + */ +static void mcam_sg_restart(struct mcam_camera *cam) +{ + mcam_ctlr_dma_sg(cam); + mcam_ctlr_start(cam); + clear_bit(CF_SG_RESTART, &cam->flags); +} + +#else /* MCAM_MODE_DMA_SG */ + +static inline void mcam_sg_restart(struct mcam_camera *cam) +{ + return; +} + +#endif /* MCAM_MODE_DMA_SG */ + +/* ---------------------------------------------------------------------- */ +/* + * Buffer-mode-independent controller code. + */ + +/* + * Image format setup + */ +static void mcam_ctlr_image(struct mcam_camera *cam) +{ + int imgsz; + struct v4l2_pix_format *fmt = &cam->pix_format; + + imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) | + (fmt->bytesperline & IMGSZ_H_MASK); + mcam_reg_write(cam, REG_IMGSIZE, imgsz); + mcam_reg_write(cam, REG_IMGOFFSET, 0); + /* YPITCH just drops the last two bits */ + mcam_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline, + IMGP_YP_MASK); + /* + * Tell the controller about the image format we are using. + */ + switch (cam->pix_format.pixelformat) { + case V4L2_PIX_FMT_YUYV: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV, + C0_DF_MASK); + break; + + case V4L2_PIX_FMT_RGB444: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB, + C0_DF_MASK); + /* Alpha value? */ + break; + + case V4L2_PIX_FMT_RGB565: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR, + C0_DF_MASK); + break; + + default: + cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat); + break; + } + /* + * Make sure it knows we want to use hsync/vsync. + */ + mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, + C0_SIFM_MASK); +} + + +/* + * Configure the controller for operation; caller holds the + * device mutex. + */ +static int mcam_ctlr_configure(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_SG_RESTART, &cam->flags); + cam->dma_setup(cam); + mcam_ctlr_image(cam); + mcam_set_config_needed(cam, 0); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + +static void mcam_ctlr_irq_enable(struct mcam_camera *cam) +{ + /* + * Clear any pending interrupts, since we do not + * expect to have I/O active prior to enabling. + */ + mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); + mcam_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS); +} + +static void mcam_ctlr_irq_disable(struct mcam_camera *cam) +{ + mcam_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS); +} + + + +static void mcam_ctlr_init(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + /* + * Make sure it's not powered down. + */ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); + /* + * Turn off the enable bit. It sure should be off anyway, + * but it's good to be sure. + */ + mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); + /* + * Clock the sensor appropriately. Controller clock should + * be 48MHz, sensor "typical" value is half that. + */ + mcam_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + + +/* + * Stop the controller, and don't return until we're really sure that no + * further DMA is going on. + */ +static void mcam_ctlr_stop_dma(struct mcam_camera *cam) +{ + unsigned long flags; + + /* + * Theory: stop the camera controller (whether it is operating + * or not). Delay briefly just in case we race with the SOF + * interrupt, then wait until no DMA is active. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_SG_RESTART, &cam->flags); + mcam_ctlr_stop(cam); + cam->state = S_IDLE; + spin_unlock_irqrestore(&cam->dev_lock, flags); + /* + * This is a brutally long sleep, but experience shows that + * it can take the controller a while to get the message that + * it needs to stop grabbing frames. In particular, we can + * sometimes (on mmp) get a frame at the end WITHOUT the + * start-of-frame indication. + */ + msleep(150); + if (test_bit(CF_DMA_ACTIVE, &cam->flags)) + cam_err(cam, "Timeout waiting for DMA to end\n"); + /* This would be bad news - what now? */ + spin_lock_irqsave(&cam->dev_lock, flags); + mcam_ctlr_irq_disable(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* + * Power up and down. + */ +static void mcam_ctlr_power_up(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + cam->plat_power_up(cam); + mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); + spin_unlock_irqrestore(&cam->dev_lock, flags); + msleep(5); /* Just to be sure */ +} + +static void mcam_ctlr_power_down(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + /* + * School of hard knocks department: be sure we do any register + * twiddling on the controller *before* calling the platform + * power down routine. + */ + mcam_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN); + cam->plat_power_down(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* -------------------------------------------------------------------- */ +/* + * Communications with the sensor. + */ + +static int __mcam_cam_reset(struct mcam_camera *cam) +{ + return sensor_call(cam, core, reset, 0); +} + +/* + * We have found the sensor on the i2c. Let's try to have a + * conversation. + */ +static int mcam_cam_init(struct mcam_camera *cam) +{ + struct v4l2_dbg_chip_ident chip; + int ret; + + mutex_lock(&cam->s_mutex); + if (cam->state != S_NOTREADY) + cam_warn(cam, "Cam init with device in funky state %d", + cam->state); + ret = __mcam_cam_reset(cam); + if (ret) + goto out; + chip.ident = V4L2_IDENT_NONE; + chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR; + chip.match.addr = cam->sensor_addr; + ret = sensor_call(cam, core, g_chip_ident, &chip); + if (ret) + goto out; + cam->sensor_type = chip.ident; + if (cam->sensor_type != V4L2_IDENT_OV7670) { + cam_err(cam, "Unsupported sensor type 0x%x", cam->sensor_type); + ret = -EINVAL; + goto out; + } +/* Get/set parameters? */ + ret = 0; + cam->state = S_IDLE; +out: + mcam_ctlr_power_down(cam); + mutex_unlock(&cam->s_mutex); + return ret; +} + +/* + * Configure the sensor to match the parameters we have. Caller should + * hold s_mutex + */ +static int mcam_cam_set_flip(struct mcam_camera *cam) +{ + struct v4l2_control ctrl; + + memset(&ctrl, 0, sizeof(ctrl)); + ctrl.id = V4L2_CID_VFLIP; + ctrl.value = flip; + return sensor_call(cam, core, s_ctrl, &ctrl); +} + + +static int mcam_cam_configure(struct mcam_camera *cam) +{ + struct v4l2_mbus_framefmt mbus_fmt; + int ret; + + v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code); + ret = sensor_call(cam, core, init, 0); + if (ret == 0) + ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt); + /* + * OV7670 does weird things if flip is set *before* format... + */ + ret += mcam_cam_set_flip(cam); + return ret; +} + +/* + * Get everything ready, and start grabbing frames. + */ +static int mcam_read_setup(struct mcam_camera *cam) +{ + int ret; + unsigned long flags; + + /* + * Configuration. If we still don't have DMA buffers, + * make one last, desperate attempt. + */ + if (cam->buffer_mode == B_vmalloc && cam->nbufs == 0 && + mcam_alloc_dma_bufs(cam, 0)) + return -ENOMEM; + + if (mcam_needs_config(cam)) { + mcam_cam_configure(cam); + ret = mcam_ctlr_configure(cam); + if (ret) + return ret; + } + + /* + * Turn it loose. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_DMA_ACTIVE, &cam->flags); + mcam_reset_buffers(cam); + mcam_ctlr_irq_enable(cam); + cam->state = S_STREAMING; + if (!test_bit(CF_SG_RESTART, &cam->flags)) + mcam_ctlr_start(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + +/* ----------------------------------------------------------------------- */ +/* + * Videobuf2 interface code. + */ + +static int mcam_vb_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, unsigned int *nbufs, + unsigned int *num_planes, unsigned int sizes[], + void *alloc_ctxs[]) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + int minbufs = (cam->buffer_mode == B_DMA_contig) ? 3 : 2; + + sizes[0] = cam->pix_format.sizeimage; + *num_planes = 1; /* Someday we have to support planar formats... */ + if (*nbufs < minbufs) + *nbufs = minbufs; + if (cam->buffer_mode == B_DMA_contig) + alloc_ctxs[0] = cam->vb_alloc_ctx; + return 0; +} + + +static void mcam_vb_buf_queue(struct vb2_buffer *vb) +{ + struct mcam_vb_buffer *mvb = vb_to_mvb(vb); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + unsigned long flags; + int start; + + spin_lock_irqsave(&cam->dev_lock, flags); + start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers); + list_add(&mvb->queue, &cam->buffers); + if (cam->state == S_STREAMING && test_bit(CF_SG_RESTART, &cam->flags)) + mcam_sg_restart(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); + if (start) + mcam_read_setup(cam); +} + + +/* + * vb2 uses these to release the mutex when waiting in dqbuf. I'm + * not actually sure we need to do this (I'm not sure that vb2_dqbuf() needs + * to be called with the mutex held), but better safe than sorry. + */ +static void mcam_vb_wait_prepare(struct vb2_queue *vq) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + + mutex_unlock(&cam->s_mutex); +} + +static void mcam_vb_wait_finish(struct vb2_queue *vq) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + + mutex_lock(&cam->s_mutex); +} + +/* + * These need to be called with the mutex held from vb2 + */ +static int mcam_vb_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + + if (cam->state != S_IDLE) { + INIT_LIST_HEAD(&cam->buffers); + return -EINVAL; + } + cam->sequence = 0; + /* + * Videobuf2 sneakily hoards all the buffers and won't + * give them to us until *after* streaming starts. But + * we can't actually start streaming until we have a + * destination. So go into a wait state and hope they + * give us buffers soon. + */ + if (cam->buffer_mode != B_vmalloc && list_empty(&cam->buffers)) { + cam->state = S_BUFWAIT; + return 0; + } + return mcam_read_setup(cam); +} + +static int mcam_vb_stop_streaming(struct vb2_queue *vq) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + unsigned long flags; + + if (cam->state == S_BUFWAIT) { + /* They never gave us buffers */ + cam->state = S_IDLE; + return 0; + } + if (cam->state != S_STREAMING) + return -EINVAL; + mcam_ctlr_stop_dma(cam); + /* + * VB2 reclaims the buffers, so we need to forget + * about them. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + INIT_LIST_HEAD(&cam->buffers); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + + +static const struct vb2_ops mcam_vb2_ops = { + .queue_setup = mcam_vb_queue_setup, + .buf_queue = mcam_vb_buf_queue, + .start_streaming = mcam_vb_start_streaming, + .stop_streaming = mcam_vb_stop_streaming, + .wait_prepare = mcam_vb_wait_prepare, + .wait_finish = mcam_vb_wait_finish, +}; + + +#ifdef MCAM_MODE_DMA_SG +/* + * Scatter/gather mode uses all of the above functions plus a + * few extras to deal with DMA mapping. + */ +static int mcam_vb_sg_buf_init(struct vb2_buffer *vb) +{ + struct mcam_vb_buffer *mvb = vb_to_mvb(vb); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1; + + mvb->dma_desc = dma_alloc_coherent(cam->dev, + ndesc * sizeof(struct mcam_dma_desc), + &mvb->dma_desc_pa, GFP_KERNEL); + if (mvb->dma_desc == NULL) { + cam_err(cam, "Unable to get DMA descriptor array\n"); + return -ENOMEM; + } + return 0; +} + +static int mcam_vb_sg_buf_prepare(struct vb2_buffer *vb) +{ + struct mcam_vb_buffer *mvb = vb_to_mvb(vb); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_dma_sg_desc *sgd = vb2_dma_sg_plane_desc(vb, 0); + struct mcam_dma_desc *desc = mvb->dma_desc; + struct scatterlist *sg; + int i; + + mvb->dma_desc_nent = dma_map_sg(cam->dev, sgd->sglist, sgd->num_pages, + DMA_FROM_DEVICE); + if (mvb->dma_desc_nent <= 0) + return -EIO; /* Not sure what's right here */ + for_each_sg(sgd->sglist, sg, mvb->dma_desc_nent, i) { + desc->dma_addr = sg_dma_address(sg); + desc->segment_len = sg_dma_len(sg); + desc++; + } + return 0; +} + +static int mcam_vb_sg_buf_finish(struct vb2_buffer *vb) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_dma_sg_desc *sgd = vb2_dma_sg_plane_desc(vb, 0); + + dma_unmap_sg(cam->dev, sgd->sglist, sgd->num_pages, DMA_FROM_DEVICE); + return 0; +} + +static void mcam_vb_sg_buf_cleanup(struct vb2_buffer *vb) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + struct mcam_vb_buffer *mvb = vb_to_mvb(vb); + int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1; + + dma_free_coherent(cam->dev, ndesc * sizeof(struct mcam_dma_desc), + mvb->dma_desc, mvb->dma_desc_pa); +} + + +static const struct vb2_ops mcam_vb2_sg_ops = { + .queue_setup = mcam_vb_queue_setup, + .buf_init = mcam_vb_sg_buf_init, + .buf_prepare = mcam_vb_sg_buf_prepare, + .buf_queue = mcam_vb_buf_queue, + .buf_finish = mcam_vb_sg_buf_finish, + .buf_cleanup = mcam_vb_sg_buf_cleanup, + .start_streaming = mcam_vb_start_streaming, + .stop_streaming = mcam_vb_stop_streaming, + .wait_prepare = mcam_vb_wait_prepare, + .wait_finish = mcam_vb_wait_finish, +}; + +#endif /* MCAM_MODE_DMA_SG */ + +static int mcam_setup_vb2(struct mcam_camera *cam) +{ + struct vb2_queue *vq = &cam->vb_queue; + + memset(vq, 0, sizeof(*vq)); + vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + vq->drv_priv = cam; + INIT_LIST_HEAD(&cam->buffers); + switch (cam->buffer_mode) { + case B_DMA_contig: +#ifdef MCAM_MODE_DMA_CONTIG + vq->ops = &mcam_vb2_ops; + vq->mem_ops = &vb2_dma_contig_memops; + cam->vb_alloc_ctx = vb2_dma_contig_init_ctx(cam->dev); + vq->io_modes = VB2_MMAP | VB2_USERPTR; + cam->dma_setup = mcam_ctlr_dma_contig; + cam->frame_complete = mcam_dma_contig_done; +#endif + break; + case B_DMA_sg: +#ifdef MCAM_MODE_DMA_SG + vq->ops = &mcam_vb2_sg_ops; + vq->mem_ops = &vb2_dma_sg_memops; + vq->io_modes = VB2_MMAP | VB2_USERPTR; + cam->dma_setup = mcam_ctlr_dma_sg; + cam->frame_complete = mcam_dma_sg_done; +#endif + break; + case B_vmalloc: +#ifdef MCAM_MODE_VMALLOC + tasklet_init(&cam->s_tasklet, mcam_frame_tasklet, + (unsigned long) cam); + vq->ops = &mcam_vb2_ops; + vq->mem_ops = &vb2_vmalloc_memops; + vq->buf_struct_size = sizeof(struct mcam_vb_buffer); + vq->io_modes = VB2_MMAP; + cam->dma_setup = mcam_ctlr_dma_vmalloc; + cam->frame_complete = mcam_vmalloc_done; +#endif + break; + } + return vb2_queue_init(vq); +} + +static void mcam_cleanup_vb2(struct mcam_camera *cam) +{ + vb2_queue_release(&cam->vb_queue); +#ifdef MCAM_MODE_DMA_CONTIG + if (cam->buffer_mode == B_DMA_contig) + vb2_dma_contig_cleanup_ctx(cam->vb_alloc_ctx); +#endif +} + + +/* ---------------------------------------------------------------------- */ +/* + * The long list of V4L2 ioctl() operations. + */ + +static int mcam_vidioc_streamon(struct file *filp, void *priv, + enum v4l2_buf_type type) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_streamon(&cam->vb_queue, type); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_streamoff(struct file *filp, void *priv, + enum v4l2_buf_type type) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_streamoff(&cam->vb_queue, type); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_reqbufs(struct file *filp, void *priv, + struct v4l2_requestbuffers *req) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_reqbufs(&cam->vb_queue, req); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_querybuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_querybuf(&cam->vb_queue, buf); + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int mcam_vidioc_qbuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_qbuf(&cam->vb_queue, buf); + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int mcam_vidioc_dqbuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_dqbuf(&cam->vb_queue, buf, filp->f_flags & O_NONBLOCK); + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int mcam_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strcpy(cap->driver, "marvell_ccic"); + strcpy(cap->card, "marvell_ccic"); + cap->version = 1; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + return 0; +} + + +static int mcam_vidioc_enum_fmt_vid_cap(struct file *filp, + void *priv, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index >= N_MCAM_FMTS) + return -EINVAL; + strlcpy(fmt->description, mcam_formats[fmt->index].desc, + sizeof(fmt->description)); + fmt->pixelformat = mcam_formats[fmt->index].pixelformat; + return 0; +} + +static int mcam_vidioc_try_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *fmt) +{ + struct mcam_camera *cam = priv; + struct mcam_format_struct *f; + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct v4l2_mbus_framefmt mbus_fmt; + int ret; + + f = mcam_find_format(pix->pixelformat); + pix->pixelformat = f->pixelformat; + v4l2_fill_mbus_format(&mbus_fmt, pix, f->mbus_code); + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, try_mbus_fmt, &mbus_fmt); + mutex_unlock(&cam->s_mutex); + v4l2_fill_pix_format(pix, &mbus_fmt); + pix->bytesperline = pix->width * f->bpp; + pix->sizeimage = pix->height * pix->bytesperline; + return ret; +} + +static int mcam_vidioc_s_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *fmt) +{ + struct mcam_camera *cam = priv; + struct mcam_format_struct *f; + int ret; + + /* + * Can't do anything if the device is not idle + * Also can't if there are streaming buffers in place. + */ + if (cam->state != S_IDLE || cam->vb_queue.num_buffers > 0) + return -EBUSY; + + f = mcam_find_format(fmt->fmt.pix.pixelformat); + + /* + * See if the formatting works in principle. + */ + ret = mcam_vidioc_try_fmt_vid_cap(filp, priv, fmt); + if (ret) + return ret; + /* + * Now we start to change things for real, so let's do it + * under lock. + */ + mutex_lock(&cam->s_mutex); + cam->pix_format = fmt->fmt.pix; + cam->mbus_code = f->mbus_code; + + /* + * Make sure we have appropriate DMA buffers. + */ + if (cam->buffer_mode == B_vmalloc) { + ret = mcam_check_dma_buffers(cam); + if (ret) + goto out; + } + mcam_set_config_needed(cam, 1); +out: + mutex_unlock(&cam->s_mutex); + return ret; +} + +/* + * Return our stored notion of how the camera is/should be configured. + * The V4l2 spec wants us to be smarter, and actually get this from + * the camera (and not mess with it at open time). Someday. + */ +static int mcam_vidioc_g_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *f) +{ + struct mcam_camera *cam = priv; + + f->fmt.pix = cam->pix_format; + return 0; +} + +/* + * We only have one input - the sensor - so minimize the nonsense here. + */ +static int mcam_vidioc_enum_input(struct file *filp, void *priv, + struct v4l2_input *input) +{ + if (input->index != 0) + return -EINVAL; + + input->type = V4L2_INPUT_TYPE_CAMERA; + input->std = V4L2_STD_ALL; /* Not sure what should go here */ + strcpy(input->name, "Camera"); + return 0; +} + +static int mcam_vidioc_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int mcam_vidioc_s_input(struct file *filp, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + return 0; +} + +/* from vivi.c */ +static int mcam_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id a) +{ + return 0; +} + +/* + * G/S_PARM. Most of this is done by the sensor, but we are + * the level which controls the number of read buffers. + */ +static int mcam_vidioc_g_parm(struct file *filp, void *priv, + struct v4l2_streamparm *parms) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, g_parm, parms); + mutex_unlock(&cam->s_mutex); + parms->parm.capture.readbuffers = n_dma_bufs; + return ret; +} + +static int mcam_vidioc_s_parm(struct file *filp, void *priv, + struct v4l2_streamparm *parms) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, s_parm, parms); + mutex_unlock(&cam->s_mutex); + parms->parm.capture.readbuffers = n_dma_bufs; + return ret; +} + +static int mcam_vidioc_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + struct mcam_camera *cam = priv; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (v4l2_chip_match_host(&chip->match)) { + chip->ident = cam->chip_id; + return 0; + } + return sensor_call(cam, core, g_chip_ident, chip); +} + +static int mcam_vidioc_enum_framesizes(struct file *filp, void *priv, + struct v4l2_frmsizeenum *sizes) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, enum_framesizes, sizes); + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int mcam_vidioc_enum_frameintervals(struct file *filp, void *priv, + struct v4l2_frmivalenum *interval) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, enum_frameintervals, interval); + mutex_unlock(&cam->s_mutex); + return ret; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mcam_vidioc_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct mcam_camera *cam = priv; + + if (v4l2_chip_match_host(®->match)) { + reg->val = mcam_reg_read(cam, reg->reg); + reg->size = 4; + return 0; + } + return sensor_call(cam, core, g_register, reg); +} + +static int mcam_vidioc_s_register(struct file *file, void *priv, + const struct v4l2_dbg_register *reg) +{ + struct mcam_camera *cam = priv; + + if (v4l2_chip_match_host(®->match)) { + mcam_reg_write(cam, reg->reg, reg->val); + return 0; + } + return sensor_call(cam, core, s_register, reg); +} +#endif + +static const struct v4l2_ioctl_ops mcam_v4l_ioctl_ops = { + .vidioc_querycap = mcam_vidioc_querycap, + .vidioc_enum_fmt_vid_cap = mcam_vidioc_enum_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = mcam_vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = mcam_vidioc_s_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = mcam_vidioc_g_fmt_vid_cap, + .vidioc_enum_input = mcam_vidioc_enum_input, + .vidioc_g_input = mcam_vidioc_g_input, + .vidioc_s_input = mcam_vidioc_s_input, + .vidioc_s_std = mcam_vidioc_s_std, + .vidioc_reqbufs = mcam_vidioc_reqbufs, + .vidioc_querybuf = mcam_vidioc_querybuf, + .vidioc_qbuf = mcam_vidioc_qbuf, + .vidioc_dqbuf = mcam_vidioc_dqbuf, + .vidioc_streamon = mcam_vidioc_streamon, + .vidioc_streamoff = mcam_vidioc_streamoff, + .vidioc_g_parm = mcam_vidioc_g_parm, + .vidioc_s_parm = mcam_vidioc_s_parm, + .vidioc_enum_framesizes = mcam_vidioc_enum_framesizes, + .vidioc_enum_frameintervals = mcam_vidioc_enum_frameintervals, + .vidioc_g_chip_ident = mcam_vidioc_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = mcam_vidioc_g_register, + .vidioc_s_register = mcam_vidioc_s_register, +#endif +}; + +/* ---------------------------------------------------------------------- */ +/* + * Our various file operations. + */ +static int mcam_v4l_open(struct file *filp) +{ + struct mcam_camera *cam = video_drvdata(filp); + int ret = 0; + + filp->private_data = cam; + + cam->frame_state.frames = 0; + cam->frame_state.singles = 0; + cam->frame_state.delivered = 0; + mutex_lock(&cam->s_mutex); + if (cam->users == 0) { + ret = mcam_setup_vb2(cam); + if (ret) + goto out; + mcam_ctlr_power_up(cam); + __mcam_cam_reset(cam); + mcam_set_config_needed(cam, 1); + } + (cam->users)++; +out: + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_v4l_release(struct file *filp) +{ + struct mcam_camera *cam = filp->private_data; + + cam_dbg(cam, "Release, %d frames, %d singles, %d delivered\n", + cam->frame_state.frames, cam->frame_state.singles, + cam->frame_state.delivered); + mutex_lock(&cam->s_mutex); + (cam->users)--; + if (cam->users == 0) { + mcam_ctlr_stop_dma(cam); + mcam_cleanup_vb2(cam); + mcam_ctlr_power_down(cam); + if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read) + mcam_free_dma_bufs(cam); + } + mutex_unlock(&cam->s_mutex); + return 0; +} + +static ssize_t mcam_v4l_read(struct file *filp, + char __user *buffer, size_t len, loff_t *pos) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_read(&cam->vb_queue, buffer, len, pos, + filp->f_flags & O_NONBLOCK); + mutex_unlock(&cam->s_mutex); + return ret; +} + + + +static unsigned int mcam_v4l_poll(struct file *filp, + struct poll_table_struct *pt) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_poll(&cam->vb_queue, filp, pt); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_v4l_mmap(struct file *filp, struct vm_area_struct *vma) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_mmap(&cam->vb_queue, vma); + mutex_unlock(&cam->s_mutex); + return ret; +} + + + +static const struct v4l2_file_operations mcam_v4l_fops = { + .owner = THIS_MODULE, + .open = mcam_v4l_open, + .release = mcam_v4l_release, + .read = mcam_v4l_read, + .poll = mcam_v4l_poll, + .mmap = mcam_v4l_mmap, + .unlocked_ioctl = video_ioctl2, +}; + + +/* + * This template device holds all of those v4l2 methods; we + * clone it for specific real devices. + */ +static struct video_device mcam_v4l_template = { + .name = "mcam", + .tvnorms = V4L2_STD_NTSC_M, + .current_norm = V4L2_STD_NTSC_M, /* make mplayer happy */ + + .fops = &mcam_v4l_fops, + .ioctl_ops = &mcam_v4l_ioctl_ops, + .release = video_device_release_empty, +}; + +/* ---------------------------------------------------------------------- */ +/* + * Interrupt handler stuff + */ +static void mcam_frame_complete(struct mcam_camera *cam, int frame) +{ + /* + * Basic frame housekeeping. + */ + set_bit(frame, &cam->flags); + clear_bit(CF_DMA_ACTIVE, &cam->flags); + cam->next_buf = frame; + cam->buf_seq[frame] = ++(cam->sequence); + cam->frame_state.frames++; + /* + * "This should never happen" + */ + if (cam->state != S_STREAMING) + return; + /* + * Process the frame and set up the next one. + */ + cam->frame_complete(cam, frame); +} + + +/* + * The interrupt handler; this needs to be called from the + * platform irq handler with the lock held. + */ +int mccic_irq(struct mcam_camera *cam, unsigned int irqs) +{ + unsigned int frame, handled = 0; + + mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */ + /* + * Handle any frame completions. There really should + * not be more than one of these, or we have fallen + * far behind. + * + * When running in S/G mode, the frame number lacks any + * real meaning - there's only one descriptor array - but + * the controller still picks a different one to signal + * each time. + */ + for (frame = 0; frame < cam->nbufs; frame++) + if (irqs & (IRQ_EOF0 << frame)) { + mcam_frame_complete(cam, frame); + handled = 1; + if (cam->buffer_mode == B_DMA_sg) + break; + } + /* + * If a frame starts, note that we have DMA active. This + * code assumes that we won't get multiple frame interrupts + * at once; may want to rethink that. + */ + if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2)) { + set_bit(CF_DMA_ACTIVE, &cam->flags); + handled = 1; + if (cam->buffer_mode == B_DMA_sg) + mcam_ctlr_stop(cam); + } + return handled; +} + +/* ---------------------------------------------------------------------- */ +/* + * Registration and such. + */ +static struct ov7670_config sensor_cfg = { + /* + * Exclude QCIF mode, because it only captures a tiny portion + * of the sensor FOV + */ + .min_width = 320, + .min_height = 240, +}; + + +int mccic_register(struct mcam_camera *cam) +{ + struct i2c_board_info ov7670_info = { + .type = "ov7670", + .addr = 0x42 >> 1, + .platform_data = &sensor_cfg, + }; + int ret; + + /* + * Validate the requested buffer mode. + */ + if (buffer_mode >= 0) + cam->buffer_mode = buffer_mode; + if (cam->buffer_mode == B_DMA_sg && + cam->chip_id == V4L2_IDENT_CAFE) { + printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, " + "attempting vmalloc mode instead\n"); + cam->buffer_mode = B_vmalloc; + } + if (!mcam_buffer_mode_supported(cam->buffer_mode)) { + printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n", + cam->buffer_mode); + return -EINVAL; + } + /* + * Register with V4L + */ + ret = v4l2_device_register(cam->dev, &cam->v4l2_dev); + if (ret) + return ret; + + mutex_init(&cam->s_mutex); + cam->state = S_NOTREADY; + mcam_set_config_needed(cam, 1); + cam->pix_format = mcam_def_pix_format; + cam->mbus_code = mcam_def_mbus_code; + INIT_LIST_HEAD(&cam->buffers); + mcam_ctlr_init(cam); + + /* + * Try to find the sensor. + */ + sensor_cfg.clock_speed = cam->clock_speed; + sensor_cfg.use_smbus = cam->use_smbus; + cam->sensor_addr = ov7670_info.addr; + cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, + cam->i2c_adapter, &ov7670_info, NULL); + if (cam->sensor == NULL) { + ret = -ENODEV; + goto out_unregister; + } + + ret = mcam_cam_init(cam); + if (ret) + goto out_unregister; + /* + * Get the v4l2 setup done. + */ + ret = v4l2_ctrl_handler_init(&cam->ctrl_handler, 10); + if (ret) + goto out_unregister; + cam->v4l2_dev.ctrl_handler = &cam->ctrl_handler; + + mutex_lock(&cam->s_mutex); + cam->vdev = mcam_v4l_template; + cam->vdev.debug = 0; + cam->vdev.v4l2_dev = &cam->v4l2_dev; + video_set_drvdata(&cam->vdev, cam); + ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1); + if (ret) + goto out; + + /* + * If so requested, try to get our DMA buffers now. + */ + if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) { + if (mcam_alloc_dma_bufs(cam, 1)) + cam_warn(cam, "Unable to alloc DMA buffers at load" + " will try again later."); + } + +out: + v4l2_ctrl_handler_free(&cam->ctrl_handler); + mutex_unlock(&cam->s_mutex); + return ret; +out_unregister: + v4l2_device_unregister(&cam->v4l2_dev); + return ret; +} + + +void mccic_shutdown(struct mcam_camera *cam) +{ + /* + * If we have no users (and we really, really should have no + * users) the device will already be powered down. Trying to + * take it down again will wedge the machine, which is frowned + * upon. + */ + if (cam->users > 0) { + cam_warn(cam, "Removing a device with users!\n"); + mcam_ctlr_power_down(cam); + } + vb2_queue_release(&cam->vb_queue); + if (cam->buffer_mode == B_vmalloc) + mcam_free_dma_bufs(cam); + video_unregister_device(&cam->vdev); + v4l2_ctrl_handler_free(&cam->ctrl_handler); + v4l2_device_unregister(&cam->v4l2_dev); +} + +/* + * Power management + */ +#ifdef CONFIG_PM + +void mccic_suspend(struct mcam_camera *cam) +{ + mutex_lock(&cam->s_mutex); + if (cam->users > 0) { + enum mcam_state cstate = cam->state; + + mcam_ctlr_stop_dma(cam); + mcam_ctlr_power_down(cam); + cam->state = cstate; + } + mutex_unlock(&cam->s_mutex); +} + +int mccic_resume(struct mcam_camera *cam) +{ + int ret = 0; + + mutex_lock(&cam->s_mutex); + if (cam->users > 0) { + mcam_ctlr_power_up(cam); + __mcam_cam_reset(cam); + } else { + mcam_ctlr_power_down(cam); + } + mutex_unlock(&cam->s_mutex); + + set_bit(CF_CONFIG_NEEDED, &cam->flags); + if (cam->state == S_STREAMING) { + /* + * If there was a buffer in the DMA engine at suspend + * time, put it back on the queue or we'll forget about it. + */ + if (cam->buffer_mode == B_DMA_sg && cam->vb_bufs[0]) + list_add(&cam->vb_bufs[0]->queue, &cam->buffers); + ret = mcam_read_setup(cam); + } + return ret; +} +#endif /* CONFIG_PM */ diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h new file mode 100644 index 00000000..01dec9e5 --- /dev/null +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -0,0 +1,333 @@ +/* + * Marvell camera core structures. + * + * Copyright 2011 Jonathan Corbet corbet@lwn.net + */ +#ifndef _MCAM_CORE_H +#define _MCAM_CORE_H + +#include +#include +#include +#include +#include + +/* + * Create our own symbols for the supported buffer modes, but, for now, + * base them entirely on which videobuf2 options have been selected. + */ +#if IS_ENABLED(CONFIG_VIDEOBUF2_VMALLOC) +#define MCAM_MODE_VMALLOC 1 +#endif + +#if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_CONTIG) +#define MCAM_MODE_DMA_CONTIG 1 +#endif + +#if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_SG) +#define MCAM_MODE_DMA_SG 1 +#endif + +#if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \ + !defined(MCAM_MODE_DMA_SG) +#error One of the videobuf buffer modes must be selected in the config +#endif + + +enum mcam_state { + S_NOTREADY, /* Not yet initialized */ + S_IDLE, /* Just hanging around */ + S_FLAKED, /* Some sort of problem */ + S_STREAMING, /* Streaming data */ + S_BUFWAIT /* streaming requested but no buffers yet */ +}; +#define MAX_DMA_BUFS 3 + +/* + * Different platforms work best with different buffer modes, so we + * let the platform pick. + */ +enum mcam_buffer_mode { + B_vmalloc = 0, + B_DMA_contig = 1, + B_DMA_sg = 2 +}; + +/* + * Is a given buffer mode supported by the current kernel configuration? + */ +static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode) +{ + switch (mode) { +#ifdef MCAM_MODE_VMALLOC + case B_vmalloc: +#endif +#ifdef MCAM_MODE_DMA_CONTIG + case B_DMA_contig: +#endif +#ifdef MCAM_MODE_DMA_SG + case B_DMA_sg: +#endif + return 1; + default: + return 0; + } +} + +/* + * Basic frame states + */ +struct mcam_frame_state { + unsigned int frames; + unsigned int singles; + unsigned int delivered; +}; + +/* + * A description of one of our devices. + * Locking: controlled by s_mutex. Certain fields, however, require + * the dev_lock spinlock; they are marked as such by comments. + * dev_lock is also required for access to device registers. + */ +struct mcam_camera { + /* + * These fields should be set by the platform code prior to + * calling mcam_register(). + */ + struct i2c_adapter *i2c_adapter; + unsigned char __iomem *regs; + spinlock_t dev_lock; + struct device *dev; /* For messages, dma alloc */ + unsigned int chip_id; + short int clock_speed; /* Sensor clock speed, default 30 */ + short int use_smbus; /* SMBUS or straight I2c? */ + enum mcam_buffer_mode buffer_mode; + /* + * Callbacks from the core to the platform code. + */ + void (*plat_power_up) (struct mcam_camera *cam); + void (*plat_power_down) (struct mcam_camera *cam); + + /* + * Everything below here is private to the mcam core and + * should not be touched by the platform code. + */ + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl_handler; + enum mcam_state state; + unsigned long flags; /* Buffer status, mainly (dev_lock) */ + int users; /* How many open FDs */ + + struct mcam_frame_state frame_state; /* Frame state counter */ + /* + * Subsystem structures. + */ + struct video_device vdev; + struct v4l2_subdev *sensor; + unsigned short sensor_addr; + + /* Videobuf2 stuff */ + struct vb2_queue vb_queue; + struct list_head buffers; /* Available frames */ + + unsigned int nbufs; /* How many are alloc'd */ + int next_buf; /* Next to consume (dev_lock) */ + + /* DMA buffers - vmalloc mode */ +#ifdef MCAM_MODE_VMALLOC + unsigned int dma_buf_size; /* allocated size */ + void *dma_bufs[MAX_DMA_BUFS]; /* Internal buffer addresses */ + dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */ + struct tasklet_struct s_tasklet; +#endif + unsigned int sequence; /* Frame sequence number */ + unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */ + + /* DMA buffers - DMA modes */ + struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS]; + struct vb2_alloc_ctx *vb_alloc_ctx; + + /* Mode-specific ops, set at open time */ + void (*dma_setup)(struct mcam_camera *cam); + void (*frame_complete)(struct mcam_camera *cam, int frame); + + /* Current operating parameters */ + u32 sensor_type; /* Currently ov7670 only */ + struct v4l2_pix_format pix_format; + enum v4l2_mbus_pixelcode mbus_code; + + /* Locks */ + struct mutex s_mutex; /* Access to this structure */ +}; + + +/* + * Register I/O functions. These are here because the platform code + * may legitimately need to mess with the register space. + */ +/* + * Device register I/O + */ +static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg, + unsigned int val) +{ + iowrite32(val, cam->regs + reg); +} + +static inline unsigned int mcam_reg_read(struct mcam_camera *cam, + unsigned int reg) +{ + return ioread32(cam->regs + reg); +} + + +static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg, + unsigned int val, unsigned int mask) +{ + unsigned int v = mcam_reg_read(cam, reg); + + v = (v & ~mask) | (val & mask); + mcam_reg_write(cam, reg, v); +} + +static inline void mcam_reg_clear_bit(struct mcam_camera *cam, + unsigned int reg, unsigned int val) +{ + mcam_reg_write_mask(cam, reg, 0, val); +} + +static inline void mcam_reg_set_bit(struct mcam_camera *cam, + unsigned int reg, unsigned int val) +{ + mcam_reg_write_mask(cam, reg, val, val); +} + +/* + * Functions for use by platform code. + */ +int mccic_register(struct mcam_camera *cam); +int mccic_irq(struct mcam_camera *cam, unsigned int irqs); +void mccic_shutdown(struct mcam_camera *cam); +#ifdef CONFIG_PM +void mccic_suspend(struct mcam_camera *cam); +int mccic_resume(struct mcam_camera *cam); +#endif + +/* + * Register definitions for the m88alp01 camera interface. Offsets in bytes + * as given in the spec. + */ +#define REG_Y0BAR 0x00 +#define REG_Y1BAR 0x04 +#define REG_Y2BAR 0x08 +/* ... */ + +#define REG_IMGPITCH 0x24 /* Image pitch register */ +#define IMGP_YP_SHFT 2 /* Y pitch params */ +#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */ +#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */ +#define IMGP_UVP_MASK 0x3ffc0000 +#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */ +#define IRQ_EOF0 0x00000001 /* End of frame 0 */ +#define IRQ_EOF1 0x00000002 /* End of frame 1 */ +#define IRQ_EOF2 0x00000004 /* End of frame 2 */ +#define IRQ_SOF0 0x00000008 /* Start of frame 0 */ +#define IRQ_SOF1 0x00000010 /* Start of frame 1 */ +#define IRQ_SOF2 0x00000020 /* Start of frame 2 */ +#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */ +#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */ +#define IRQ_TWSIR 0x00020000 /* TWSI read */ +#define IRQ_TWSIE 0x00040000 /* TWSI error */ +#define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE) +#define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2) +#define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW) +#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */ +#define REG_IRQSTAT 0x30 /* IRQ status / clear */ + +#define REG_IMGSIZE 0x34 /* Image size */ +#define IMGSZ_V_MASK 0x1fff0000 +#define IMGSZ_V_SHIFT 16 +#define IMGSZ_H_MASK 0x00003fff +#define REG_IMGOFFSET 0x38 /* IMage offset */ + +#define REG_CTRL0 0x3c /* Control 0 */ +#define C0_ENABLE 0x00000001 /* Makes the whole thing go */ + +/* Mask for all the format bits */ +#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */ + +/* RGB ordering */ +#define C0_RGB4_RGBX 0x00000000 +#define C0_RGB4_XRGB 0x00000004 +#define C0_RGB4_BGRX 0x00000008 +#define C0_RGB4_XBGR 0x0000000c +#define C0_RGB5_RGGB 0x00000000 +#define C0_RGB5_GRBG 0x00000004 +#define C0_RGB5_GBRG 0x00000008 +#define C0_RGB5_BGGR 0x0000000c + +/* Spec has two fields for DIN and DOUT, but they must match, so + combine them here. */ +#define C0_DF_YUV 0x00000000 /* Data is YUV */ +#define C0_DF_RGB 0x000000a0 /* ... RGB */ +#define C0_DF_BAYER 0x00000140 /* ... Bayer */ +/* 8-8-8 must be missing from the below - ask */ +#define C0_RGBF_565 0x00000000 +#define C0_RGBF_444 0x00000800 +#define C0_RGB_BGR 0x00001000 /* Blue comes first */ +#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */ +#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */ +#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */ +/* Think that 420 packed must be 111 - ask */ +#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */ +#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ +#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ +#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ +#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */ +#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */ +#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ +#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ +/* Bayer bits 18,19 if needed */ +#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ +#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ +#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ +#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ +#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ +#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ +#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ + +/* Bits below C1_444ALPHA are not present in Cafe */ +#define REG_CTRL1 0x40 /* Control 1 */ +#define C1_CLKGATE 0x00000001 /* Sensor clock gate */ +#define C1_DESC_ENA 0x00000100 /* DMA descriptor enable */ +#define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */ +#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */ +#define C1_ALPHA_SHFT 20 +#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */ +#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */ +#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */ +#define C1_DMAB_MASK 0x06000000 +#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */ +#define C1_PWRDWN 0x10000000 /* Power down */ + +#define REG_CLKCTRL 0x88 /* Clock control */ +#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */ + +/* This appears to be a Cafe-only register */ +#define REG_UBAR 0xc4 /* Upper base address register */ + +/* Armada 610 DMA descriptor registers */ +#define REG_DMA_DESC_Y 0x200 +#define REG_DMA_DESC_U 0x204 +#define REG_DMA_DESC_V 0x208 +#define REG_DESC_LEN_Y 0x20c /* Lengths are in bytes */ +#define REG_DESC_LEN_U 0x210 +#define REG_DESC_LEN_V 0x214 + +/* + * Useful stuff that probably belongs somewhere global. + */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 + +#endif /* _MCAM_CORE_H */ diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c new file mode 100644 index 00000000..c4c17fe7 --- /dev/null +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -0,0 +1,380 @@ +/* + * Support for the camera device found on Marvell MMP processors; known + * to work with the Armada 610 as used in the OLPC 1.75 system. + * + * Copyright 2011 Jonathan Corbet + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mcam-core.h" + +MODULE_ALIAS("platform:mmp-camera"); +MODULE_AUTHOR("Jonathan Corbet "); +MODULE_LICENSE("GPL"); + +struct mmp_camera { + void *power_regs; + struct platform_device *pdev; + struct mcam_camera mcam; + struct list_head devlist; + int irq; +}; + +static inline struct mmp_camera *mcam_to_cam(struct mcam_camera *mcam) +{ + return container_of(mcam, struct mmp_camera, mcam); +} + +/* + * A silly little infrastructure so we can keep track of our devices. + * Chances are that we will never have more than one of them, but + * the Armada 610 *does* have two controllers... + */ + +static LIST_HEAD(mmpcam_devices); +static struct mutex mmpcam_devices_lock; + +static void mmpcam_add_device(struct mmp_camera *cam) +{ + mutex_lock(&mmpcam_devices_lock); + list_add(&cam->devlist, &mmpcam_devices); + mutex_unlock(&mmpcam_devices_lock); +} + +static void mmpcam_remove_device(struct mmp_camera *cam) +{ + mutex_lock(&mmpcam_devices_lock); + list_del(&cam->devlist); + mutex_unlock(&mmpcam_devices_lock); +} + +/* + * Platform dev remove passes us a platform_device, and there's + * no handy unused drvdata to stash a backpointer in. So just + * dig it out of our list. + */ +static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev) +{ + struct mmp_camera *cam; + + mutex_lock(&mmpcam_devices_lock); + list_for_each_entry(cam, &mmpcam_devices, devlist) { + if (cam->pdev == pdev) { + mutex_unlock(&mmpcam_devices_lock); + return cam; + } + } + mutex_unlock(&mmpcam_devices_lock); + return NULL; +} + + + + +/* + * Power-related registers; this almost certainly belongs + * somewhere else. + * + * ARMADA 610 register manual, sec 7.2.1, p1842. + */ +#define CPU_SUBSYS_PMU_BASE 0xd4282800 +#define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg */ +#define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg */ + +/* + * Power control. + */ +static void mmpcam_power_up_ctlr(struct mmp_camera *cam) +{ + iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); + iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); + mdelay(1); +} + +static void mmpcam_power_up(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata; +/* + * Turn on power and clocks to the controller. + */ + mmpcam_power_up_ctlr(cam); +/* + * Provide power to the sensor. + */ + mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002); + pdata = cam->pdev->dev.platform_data; + gpio_set_value(pdata->sensor_power_gpio, 1); + mdelay(5); + mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000); + gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */ + mdelay(5); + gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */ + mdelay(5); +} + +static void mmpcam_power_down(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata; +/* + * Turn off clocks and set reset lines + */ + iowrite32(0, cam->power_regs + REG_CCIC_DCGCR); + iowrite32(0, cam->power_regs + REG_CCIC_CRCR); +/* + * Shut down the sensor. + */ + pdata = cam->pdev->dev.platform_data; + gpio_set_value(pdata->sensor_power_gpio, 0); + gpio_set_value(pdata->sensor_reset_gpio, 0); +} + + +static irqreturn_t mmpcam_irq(int irq, void *data) +{ + struct mcam_camera *mcam = data; + unsigned int irqs, handled; + + spin_lock(&mcam->dev_lock); + irqs = mcam_reg_read(mcam, REG_IRQSTAT); + handled = mccic_irq(mcam, irqs); + spin_unlock(&mcam->dev_lock); + return IRQ_RETVAL(handled); +} + + +static int mmpcam_probe(struct platform_device *pdev) +{ + struct mmp_camera *cam; + struct mcam_camera *mcam; + struct resource *res; + struct mmp_camera_platform_data *pdata; + int ret; + + cam = kzalloc(sizeof(*cam), GFP_KERNEL); + if (cam == NULL) + return -ENOMEM; + cam->pdev = pdev; + INIT_LIST_HEAD(&cam->devlist); + + mcam = &cam->mcam; + mcam->plat_power_up = mmpcam_power_up; + mcam->plat_power_down = mmpcam_power_down; + mcam->dev = &pdev->dev; + mcam->use_smbus = 0; + mcam->chip_id = V4L2_IDENT_ARMADA610; + mcam->buffer_mode = B_DMA_sg; + spin_lock_init(&mcam->dev_lock); + /* + * Get our I/O memory. + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no iomem resource!\n"); + ret = -ENODEV; + goto out_free; + } + mcam->regs = ioremap(res->start, resource_size(res)); + if (mcam->regs == NULL) { + dev_err(&pdev->dev, "MMIO ioremap fail\n"); + ret = -ENODEV; + goto out_free; + } + /* + * Power/clock memory is elsewhere; get it too. Perhaps this + * should really be managed outside of this driver? + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res == NULL) { + dev_err(&pdev->dev, "no power resource!\n"); + ret = -ENODEV; + goto out_unmap1; + } + cam->power_regs = ioremap(res->start, resource_size(res)); + if (cam->power_regs == NULL) { + dev_err(&pdev->dev, "power MMIO ioremap fail\n"); + ret = -ENODEV; + goto out_unmap1; + } + /* + * Find the i2c adapter. This assumes, of course, that the + * i2c bus is already up and functioning. + */ + pdata = pdev->dev.platform_data; + mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device); + if (mcam->i2c_adapter == NULL) { + ret = -ENODEV; + dev_err(&pdev->dev, "No i2c adapter\n"); + goto out_unmap2; + } + /* + * Sensor GPIO pins. + */ + ret = gpio_request(pdata->sensor_power_gpio, "cam-power"); + if (ret) { + dev_err(&pdev->dev, "Can't get sensor power gpio %d", + pdata->sensor_power_gpio); + goto out_unmap2; + } + gpio_direction_output(pdata->sensor_power_gpio, 0); + ret = gpio_request(pdata->sensor_reset_gpio, "cam-reset"); + if (ret) { + dev_err(&pdev->dev, "Can't get sensor reset gpio %d", + pdata->sensor_reset_gpio); + goto out_gpio; + } + gpio_direction_output(pdata->sensor_reset_gpio, 0); + /* + * Power the device up and hand it off to the core. + */ + mmpcam_power_up(mcam); + ret = mccic_register(mcam); + if (ret) + goto out_gpio2; + /* + * Finally, set up our IRQ now that the core is ready to + * deal with it. + */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + ret = -ENODEV; + goto out_unregister; + } + cam->irq = res->start; + ret = request_irq(cam->irq, mmpcam_irq, IRQF_SHARED, + "mmp-camera", mcam); + if (ret == 0) { + mmpcam_add_device(cam); + return 0; + } + +out_unregister: + mccic_shutdown(mcam); +out_gpio2: + mmpcam_power_down(mcam); + gpio_free(pdata->sensor_reset_gpio); +out_gpio: + gpio_free(pdata->sensor_power_gpio); +out_unmap2: + iounmap(cam->power_regs); +out_unmap1: + iounmap(mcam->regs); +out_free: + kfree(cam); + return ret; +} + + +static int mmpcam_remove(struct mmp_camera *cam) +{ + struct mcam_camera *mcam = &cam->mcam; + struct mmp_camera_platform_data *pdata; + + mmpcam_remove_device(cam); + free_irq(cam->irq, mcam); + mccic_shutdown(mcam); + mmpcam_power_down(mcam); + pdata = cam->pdev->dev.platform_data; + gpio_free(pdata->sensor_reset_gpio); + gpio_free(pdata->sensor_power_gpio); + iounmap(cam->power_regs); + iounmap(mcam->regs); + kfree(cam); + return 0; +} + +static int mmpcam_platform_remove(struct platform_device *pdev) +{ + struct mmp_camera *cam = mmpcam_find_device(pdev); + + if (cam == NULL) + return -ENODEV; + return mmpcam_remove(cam); +} + +/* + * Suspend/resume support. + */ +#ifdef CONFIG_PM + +static int mmpcam_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mmp_camera *cam = mmpcam_find_device(pdev); + + if (state.event != PM_EVENT_SUSPEND) + return 0; + mccic_suspend(&cam->mcam); + return 0; +} + +static int mmpcam_resume(struct platform_device *pdev) +{ + struct mmp_camera *cam = mmpcam_find_device(pdev); + + /* + * Power up unconditionally just in case the core tries to + * touch a register even if nothing was active before; trust + * me, it's better this way. + */ + mmpcam_power_up_ctlr(cam); + return mccic_resume(&cam->mcam); +} + +#endif + + +static struct platform_driver mmpcam_driver = { + .probe = mmpcam_probe, + .remove = mmpcam_platform_remove, +#ifdef CONFIG_PM + .suspend = mmpcam_suspend, + .resume = mmpcam_resume, +#endif + .driver = { + .name = "mmp-camera", + .owner = THIS_MODULE + } +}; + + +static int __init mmpcam_init_module(void) +{ + mutex_init(&mmpcam_devices_lock); + return platform_driver_register(&mmpcam_driver); +} + +static void __exit mmpcam_exit_module(void) +{ + platform_driver_unregister(&mmpcam_driver); + /* + * platform_driver_unregister() should have emptied the list + */ + if (!list_empty(&mmpcam_devices)) + printk(KERN_ERR "mmp_camera leaving devices behind\n"); +} + +module_init(mmpcam_init_module); +module_exit(mmpcam_exit_module); diff --git a/drivers/media/platform/mem2mem_testdev.c b/drivers/media/platform/mem2mem_testdev.c new file mode 100644 index 00000000..4cc7f65d --- /dev/null +++ b/drivers/media/platform/mem2mem_testdev.c @@ -0,0 +1,1136 @@ +/* + * A virtual v4l2-mem2mem example device. + * + * This is a virtual device driver for testing mem-to-mem videobuf framework. + * It simulates a device that uses memory buffers for both source and + * destination, processes the data and issues an "irq" (simulated by a timer). + * The device is capable of multi-instance, multi-buffer-per-transaction + * operation (via the mem2mem framework). + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * Pawel Osciak, + * Marek Szyprowski, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define MEM2MEM_TEST_MODULE_NAME "mem2mem-testdev" + +MODULE_DESCRIPTION("Virtual device for mem2mem framework testing"); +MODULE_AUTHOR("Pawel Osciak, "); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.1.1"); + +static unsigned debug; +module_param(debug, uint, 0644); +MODULE_PARM_DESC(debug, "activates debug info"); + +#define MIN_W 32 +#define MIN_H 32 +#define MAX_W 640 +#define MAX_H 480 +#define DIM_ALIGN_MASK 7 /* 8-byte alignment for line length */ + +/* Flags that indicate a format can be used for capture/output */ +#define MEM2MEM_CAPTURE (1 << 0) +#define MEM2MEM_OUTPUT (1 << 1) + +#define MEM2MEM_NAME "m2m-testdev" + +/* Per queue */ +#define MEM2MEM_DEF_NUM_BUFS VIDEO_MAX_FRAME +/* In bytes, per queue */ +#define MEM2MEM_VID_MEM_LIMIT (16 * 1024 * 1024) + +/* Default transaction time in msec */ +#define MEM2MEM_DEF_TRANSTIME 1000 +/* Default number of buffers per transaction */ +#define MEM2MEM_DEF_TRANSLEN 1 +#define MEM2MEM_COLOR_STEP (0xff >> 4) +#define MEM2MEM_NUM_TILES 8 + +/* Flags that indicate processing mode */ +#define MEM2MEM_HFLIP (1 << 0) +#define MEM2MEM_VFLIP (1 << 1) + +#define dprintk(dev, fmt, arg...) \ + v4l2_dbg(1, debug, &dev->v4l2_dev, "%s: " fmt, __func__, ## arg) + + +static void m2mtest_dev_release(struct device *dev) +{} + +static struct platform_device m2mtest_pdev = { + .name = MEM2MEM_NAME, + .dev.release = m2mtest_dev_release, +}; + +struct m2mtest_fmt { + char *name; + u32 fourcc; + int depth; + /* Types the format can be used for */ + u32 types; +}; + +static struct m2mtest_fmt formats[] = { + { + .name = "RGB565 (BE)", + .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ + .depth = 16, + /* Both capture and output format */ + .types = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT, + }, + { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + /* Output-only format */ + .types = MEM2MEM_OUTPUT, + }, +}; + +#define NUM_FORMATS ARRAY_SIZE(formats) + +/* Per-queue, driver-specific private data */ +struct m2mtest_q_data { + unsigned int width; + unsigned int height; + unsigned int sizeimage; + struct m2mtest_fmt *fmt; +}; + +enum { + V4L2_M2M_SRC = 0, + V4L2_M2M_DST = 1, +}; + +#define V4L2_CID_TRANS_TIME_MSEC (V4L2_CID_USER_BASE + 0x1000) +#define V4L2_CID_TRANS_NUM_BUFS (V4L2_CID_USER_BASE + 0x1001) + +static struct m2mtest_fmt *find_format(struct v4l2_format *f) +{ + struct m2mtest_fmt *fmt; + unsigned int k; + + for (k = 0; k < NUM_FORMATS; k++) { + fmt = &formats[k]; + if (fmt->fourcc == f->fmt.pix.pixelformat) + break; + } + + if (k == NUM_FORMATS) + return NULL; + + return &formats[k]; +} + +struct m2mtest_dev { + struct v4l2_device v4l2_dev; + struct video_device *vfd; + + atomic_t num_inst; + struct mutex dev_mutex; + spinlock_t irqlock; + + struct timer_list timer; + + struct v4l2_m2m_dev *m2m_dev; +}; + +struct m2mtest_ctx { + struct v4l2_fh fh; + struct m2mtest_dev *dev; + + struct v4l2_ctrl_handler hdl; + + /* Processed buffers in this transaction */ + u8 num_processed; + + /* Transaction length (i.e. how many buffers per transaction) */ + u32 translen; + /* Transaction time (i.e. simulated processing time) in milliseconds */ + u32 transtime; + + /* Abort requested by m2m */ + int aborting; + + /* Processing mode */ + int mode; + + enum v4l2_colorspace colorspace; + + struct v4l2_m2m_ctx *m2m_ctx; + + /* Source and destination queue data */ + struct m2mtest_q_data q_data[2]; +}; + +static inline struct m2mtest_ctx *file2ctx(struct file *file) +{ + return container_of(file->private_data, struct m2mtest_ctx, fh); +} + +static struct m2mtest_q_data *get_q_data(struct m2mtest_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &ctx->q_data[V4L2_M2M_SRC]; + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &ctx->q_data[V4L2_M2M_DST]; + default: + BUG(); + } + return NULL; +} + + +static int device_process(struct m2mtest_ctx *ctx, + struct vb2_buffer *in_vb, + struct vb2_buffer *out_vb) +{ + struct m2mtest_dev *dev = ctx->dev; + struct m2mtest_q_data *q_data; + u8 *p_in, *p_out; + int x, y, t, w; + int tile_w, bytes_left; + int width, height, bytesperline; + + q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + + width = q_data->width; + height = q_data->height; + bytesperline = (q_data->width * q_data->fmt->depth) >> 3; + + p_in = vb2_plane_vaddr(in_vb, 0); + p_out = vb2_plane_vaddr(out_vb, 0); + if (!p_in || !p_out) { + v4l2_err(&dev->v4l2_dev, + "Acquiring kernel pointers to buffers failed\n"); + return -EFAULT; + } + + if (vb2_plane_size(in_vb, 0) > vb2_plane_size(out_vb, 0)) { + v4l2_err(&dev->v4l2_dev, "Output buffer is too small\n"); + return -EINVAL; + } + + tile_w = (width * (q_data[V4L2_M2M_DST].fmt->depth >> 3)) + / MEM2MEM_NUM_TILES; + bytes_left = bytesperline - tile_w * MEM2MEM_NUM_TILES; + w = 0; + + memcpy(&out_vb->v4l2_buf.timestamp, + &in_vb->v4l2_buf.timestamp, + sizeof(struct timeval)); + + switch (ctx->mode) { + case MEM2MEM_HFLIP | MEM2MEM_VFLIP: + p_out += bytesperline * height - bytes_left; + for (y = 0; y < height; ++y) { + for (t = 0; t < MEM2MEM_NUM_TILES; ++t) { + if (w & 0x1) { + for (x = 0; x < tile_w; ++x) + *--p_out = *p_in++ + + MEM2MEM_COLOR_STEP; + } else { + for (x = 0; x < tile_w; ++x) + *--p_out = *p_in++ - + MEM2MEM_COLOR_STEP; + } + ++w; + } + p_in += bytes_left; + p_out -= bytes_left; + } + break; + + case MEM2MEM_HFLIP: + for (y = 0; y < height; ++y) { + p_out += MEM2MEM_NUM_TILES * tile_w; + for (t = 0; t < MEM2MEM_NUM_TILES; ++t) { + if (w & 0x01) { + for (x = 0; x < tile_w; ++x) + *--p_out = *p_in++ + + MEM2MEM_COLOR_STEP; + } else { + for (x = 0; x < tile_w; ++x) + *--p_out = *p_in++ - + MEM2MEM_COLOR_STEP; + } + ++w; + } + p_in += bytes_left; + p_out += bytesperline; + } + break; + + case MEM2MEM_VFLIP: + p_out += bytesperline * (height - 1); + for (y = 0; y < height; ++y) { + for (t = 0; t < MEM2MEM_NUM_TILES; ++t) { + if (w & 0x1) { + for (x = 0; x < tile_w; ++x) + *p_out++ = *p_in++ + + MEM2MEM_COLOR_STEP; + } else { + for (x = 0; x < tile_w; ++x) + *p_out++ = *p_in++ - + MEM2MEM_COLOR_STEP; + } + ++w; + } + p_in += bytes_left; + p_out += bytes_left - 2 * bytesperline; + } + break; + + default: + for (y = 0; y < height; ++y) { + for (t = 0; t < MEM2MEM_NUM_TILES; ++t) { + if (w & 0x1) { + for (x = 0; x < tile_w; ++x) + *p_out++ = *p_in++ + + MEM2MEM_COLOR_STEP; + } else { + for (x = 0; x < tile_w; ++x) + *p_out++ = *p_in++ - + MEM2MEM_COLOR_STEP; + } + ++w; + } + p_in += bytes_left; + p_out += bytes_left; + } + } + + return 0; +} + +static void schedule_irq(struct m2mtest_dev *dev, int msec_timeout) +{ + dprintk(dev, "Scheduling a simulated irq\n"); + mod_timer(&dev->timer, jiffies + msecs_to_jiffies(msec_timeout)); +} + +/* + * mem2mem callbacks + */ + +/** + * job_ready() - check whether an instance is ready to be scheduled to run + */ +static int job_ready(void *priv) +{ + struct m2mtest_ctx *ctx = priv; + + if (v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx) < ctx->translen + || v4l2_m2m_num_dst_bufs_ready(ctx->m2m_ctx) < ctx->translen) { + dprintk(ctx->dev, "Not enough buffers available\n"); + return 0; + } + + return 1; +} + +static void job_abort(void *priv) +{ + struct m2mtest_ctx *ctx = priv; + + /* Will cancel the transaction in the next interrupt handler */ + ctx->aborting = 1; +} + +static void m2mtest_lock(void *priv) +{ + struct m2mtest_ctx *ctx = priv; + struct m2mtest_dev *dev = ctx->dev; + mutex_lock(&dev->dev_mutex); +} + +static void m2mtest_unlock(void *priv) +{ + struct m2mtest_ctx *ctx = priv; + struct m2mtest_dev *dev = ctx->dev; + mutex_unlock(&dev->dev_mutex); +} + + +/* device_run() - prepares and starts the device + * + * This simulates all the immediate preparations required before starting + * a device. This will be called by the framework when it decides to schedule + * a particular instance. + */ +static void device_run(void *priv) +{ + struct m2mtest_ctx *ctx = priv; + struct m2mtest_dev *dev = ctx->dev; + struct vb2_buffer *src_buf, *dst_buf; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + + device_process(ctx, src_buf, dst_buf); + + /* Run a timer, which simulates a hardware irq */ + schedule_irq(dev, ctx->transtime); +} + +static void device_isr(unsigned long priv) +{ + struct m2mtest_dev *m2mtest_dev = (struct m2mtest_dev *)priv; + struct m2mtest_ctx *curr_ctx; + struct vb2_buffer *src_vb, *dst_vb; + unsigned long flags; + + curr_ctx = v4l2_m2m_get_curr_priv(m2mtest_dev->m2m_dev); + + if (NULL == curr_ctx) { + pr_err("Instance released before the end of transaction\n"); + return; + } + + src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->m2m_ctx); + + curr_ctx->num_processed++; + + spin_lock_irqsave(&m2mtest_dev->irqlock, flags); + v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE); + spin_unlock_irqrestore(&m2mtest_dev->irqlock, flags); + + if (curr_ctx->num_processed == curr_ctx->translen + || curr_ctx->aborting) { + dprintk(curr_ctx->dev, "Finishing transaction\n"); + curr_ctx->num_processed = 0; + v4l2_m2m_job_finish(m2mtest_dev->m2m_dev, curr_ctx->m2m_ctx); + } else { + device_run(curr_ctx); + } +} + +/* + * video ioctls + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); + strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", MEM2MEM_NAME); + cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + int i, num; + struct m2mtest_fmt *fmt; + + num = 0; + + for (i = 0; i < NUM_FORMATS; ++i) { + if (formats[i].types & type) { + /* index-th format of type type found ? */ + if (num == f->index) + break; + /* Correct type but haven't reached our index yet, + * just increment per-type index */ + ++num; + } + } + + if (i < NUM_FORMATS) { + /* Format found */ + fmt = &formats[i]; + strncpy(f->description, fmt->name, sizeof(f->description) - 1); + f->pixelformat = fmt->fourcc; + return 0; + } + + /* Format not found */ + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_CAPTURE); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_OUTPUT); +} + +static int vidioc_g_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct m2mtest_q_data *q_data; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + + f->fmt.pix.width = q_data->width; + f->fmt.pix.height = q_data->height; + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.pixelformat = q_data->fmt->fourcc; + f->fmt.pix.bytesperline = (q_data->width * q_data->fmt->depth) >> 3; + f->fmt.pix.sizeimage = q_data->sizeimage; + f->fmt.pix.colorspace = ctx->colorspace; + + return 0; +} + +static int vidioc_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(file2ctx(file), f); +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(file2ctx(file), f); +} + +static int vidioc_try_fmt(struct v4l2_format *f, struct m2mtest_fmt *fmt) +{ + enum v4l2_field field; + + field = f->fmt.pix.field; + + if (field == V4L2_FIELD_ANY) + field = V4L2_FIELD_NONE; + else if (V4L2_FIELD_NONE != field) + return -EINVAL; + + /* V4L2 specification suggests the driver corrects the format struct + * if any of the dimensions is unsupported */ + f->fmt.pix.field = field; + + if (f->fmt.pix.height < MIN_H) + f->fmt.pix.height = MIN_H; + else if (f->fmt.pix.height > MAX_H) + f->fmt.pix.height = MAX_H; + + if (f->fmt.pix.width < MIN_W) + f->fmt.pix.width = MIN_W; + else if (f->fmt.pix.width > MAX_W) + f->fmt.pix.width = MAX_W; + + f->fmt.pix.width &= ~DIM_ALIGN_MASK; + f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct m2mtest_fmt *fmt; + struct m2mtest_ctx *ctx = file2ctx(file); + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_CAPTURE)) { + v4l2_err(&ctx->dev->v4l2_dev, + "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + f->fmt.pix.colorspace = ctx->colorspace; + + return vidioc_try_fmt(f, fmt); +} + +static int vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct m2mtest_fmt *fmt; + struct m2mtest_ctx *ctx = file2ctx(file); + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_OUTPUT)) { + v4l2_err(&ctx->dev->v4l2_dev, + "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + if (!f->fmt.pix.colorspace) + f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709; + + return vidioc_try_fmt(f, fmt); +} + +static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) +{ + struct m2mtest_q_data *q_data; + struct vb2_queue *vq; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + if (!q_data) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + q_data->fmt = find_format(f); + q_data->width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; + q_data->sizeimage = q_data->width * q_data->height + * q_data->fmt->depth >> 3; + + dprintk(ctx->dev, + "Setting format for type %d, wxh: %dx%d, fmt: %d\n", + f->type, q_data->width, q_data->height, q_data->fmt->fourcc); + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(file2ctx(file), f); +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct m2mtest_ctx *ctx = file2ctx(file); + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); + if (ret) + return ret; + + ret = vidioc_s_fmt(file2ctx(file), f); + if (!ret) + ctx->colorspace = f->fmt.pix.colorspace; + return ret; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct m2mtest_ctx *ctx = file2ctx(file); + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct m2mtest_ctx *ctx = file2ctx(file); + + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct m2mtest_ctx *ctx = file2ctx(file); + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct m2mtest_ctx *ctx = file2ctx(file); + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct m2mtest_ctx *ctx = file2ctx(file); + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct m2mtest_ctx *ctx = file2ctx(file); + + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static int m2mtest_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct m2mtest_ctx *ctx = + container_of(ctrl->handler, struct m2mtest_ctx, hdl); + + switch (ctrl->id) { + case V4L2_CID_HFLIP: + if (ctrl->val) + ctx->mode |= MEM2MEM_HFLIP; + else + ctx->mode &= ~MEM2MEM_HFLIP; + break; + + case V4L2_CID_VFLIP: + if (ctrl->val) + ctx->mode |= MEM2MEM_VFLIP; + else + ctx->mode &= ~MEM2MEM_VFLIP; + break; + + case V4L2_CID_TRANS_TIME_MSEC: + ctx->transtime = ctrl->val; + break; + + case V4L2_CID_TRANS_NUM_BUFS: + ctx->translen = ctrl->val; + break; + + default: + v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n"); + return -EINVAL; + } + + return 0; +} + +static const struct v4l2_ctrl_ops m2mtest_ctrl_ops = { + .s_ctrl = m2mtest_s_ctrl, +}; + + +static const struct v4l2_ioctl_ops m2mtest_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, + .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + + +/* + * Queue operations + */ + +static int m2mtest_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct m2mtest_ctx *ctx = vb2_get_drv_priv(vq); + struct m2mtest_q_data *q_data; + unsigned int size, count = *nbuffers; + + q_data = get_q_data(ctx, vq->type); + + size = q_data->width * q_data->height * q_data->fmt->depth >> 3; + + while (size * count > MEM2MEM_VID_MEM_LIMIT) + (count)--; + + *nplanes = 1; + *nbuffers = count; + sizes[0] = size; + + /* + * videobuf2-vmalloc allocator is context-less so no need to set + * alloc_ctxs array. + */ + + dprintk(ctx->dev, "get %d buffer(s) of size %d each.\n", count, size); + + return 0; +} + +static int m2mtest_buf_prepare(struct vb2_buffer *vb) +{ + struct m2mtest_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct m2mtest_q_data *q_data; + + dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); + + q_data = get_q_data(ctx, vb->vb2_queue->type); + + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), (long)q_data->sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + + return 0; +} + +static void m2mtest_buf_queue(struct vb2_buffer *vb) +{ + struct m2mtest_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static void m2mtest_wait_prepare(struct vb2_queue *q) +{ + struct m2mtest_ctx *ctx = vb2_get_drv_priv(q); + m2mtest_unlock(ctx); +} + +static void m2mtest_wait_finish(struct vb2_queue *q) +{ + struct m2mtest_ctx *ctx = vb2_get_drv_priv(q); + m2mtest_lock(ctx); +} + +static struct vb2_ops m2mtest_qops = { + .queue_setup = m2mtest_queue_setup, + .buf_prepare = m2mtest_buf_prepare, + .buf_queue = m2mtest_buf_queue, + .wait_prepare = m2mtest_wait_prepare, + .wait_finish = m2mtest_wait_finish, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq) +{ + struct m2mtest_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP | VB2_DMABUF; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &m2mtest_qops; + src_vq->mem_ops = &vb2_vmalloc_memops; + src_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &m2mtest_qops; + dst_vq->mem_ops = &vb2_vmalloc_memops; + dst_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + return vb2_queue_init(dst_vq); +} + +static const struct v4l2_ctrl_config m2mtest_ctrl_trans_time_msec = { + .ops = &m2mtest_ctrl_ops, + .id = V4L2_CID_TRANS_TIME_MSEC, + .name = "Transaction Time (msec)", + .type = V4L2_CTRL_TYPE_INTEGER, + .def = 1001, + .min = 1, + .max = 10001, + .step = 100, +}; + +static const struct v4l2_ctrl_config m2mtest_ctrl_trans_num_bufs = { + .ops = &m2mtest_ctrl_ops, + .id = V4L2_CID_TRANS_NUM_BUFS, + .name = "Buffers Per Transaction", + .type = V4L2_CTRL_TYPE_INTEGER, + .def = 1, + .min = 1, + .max = MEM2MEM_DEF_NUM_BUFS, + .step = 1, +}; + +/* + * File operations + */ +static int m2mtest_open(struct file *file) +{ + struct m2mtest_dev *dev = video_drvdata(file); + struct m2mtest_ctx *ctx = NULL; + struct v4l2_ctrl_handler *hdl; + int rc = 0; + + if (mutex_lock_interruptible(&dev->dev_mutex)) + return -ERESTARTSYS; + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + rc = -ENOMEM; + goto open_unlock; + } + + v4l2_fh_init(&ctx->fh, video_devdata(file)); + file->private_data = &ctx->fh; + ctx->dev = dev; + hdl = &ctx->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &m2mtest_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(hdl, &m2mtest_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_custom(hdl, &m2mtest_ctrl_trans_time_msec, NULL); + v4l2_ctrl_new_custom(hdl, &m2mtest_ctrl_trans_num_bufs, NULL); + if (hdl->error) { + rc = hdl->error; + v4l2_ctrl_handler_free(hdl); + goto open_unlock; + } + ctx->fh.ctrl_handler = hdl; + v4l2_ctrl_handler_setup(hdl); + + ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0]; + ctx->q_data[V4L2_M2M_SRC].width = 640; + ctx->q_data[V4L2_M2M_SRC].height = 480; + ctx->q_data[V4L2_M2M_SRC].sizeimage = + ctx->q_data[V4L2_M2M_SRC].width * + ctx->q_data[V4L2_M2M_SRC].height * + (ctx->q_data[V4L2_M2M_SRC].fmt->depth >> 3); + ctx->q_data[V4L2_M2M_DST] = ctx->q_data[V4L2_M2M_SRC]; + ctx->colorspace = V4L2_COLORSPACE_REC709; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); + + if (IS_ERR(ctx->m2m_ctx)) { + rc = PTR_ERR(ctx->m2m_ctx); + + v4l2_ctrl_handler_free(hdl); + kfree(ctx); + goto open_unlock; + } + + v4l2_fh_add(&ctx->fh); + atomic_inc(&dev->num_inst); + + dprintk(dev, "Created instance %p, m2m_ctx: %p\n", ctx, ctx->m2m_ctx); + +open_unlock: + mutex_unlock(&dev->dev_mutex); + return rc; +} + +static int m2mtest_release(struct file *file) +{ + struct m2mtest_dev *dev = video_drvdata(file); + struct m2mtest_ctx *ctx = file2ctx(file); + + dprintk(dev, "Releasing instance %p\n", ctx); + + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + v4l2_ctrl_handler_free(&ctx->hdl); + mutex_lock(&dev->dev_mutex); + v4l2_m2m_ctx_release(ctx->m2m_ctx); + mutex_unlock(&dev->dev_mutex); + kfree(ctx); + + atomic_dec(&dev->num_inst); + + return 0; +} + +static unsigned int m2mtest_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct m2mtest_ctx *ctx = file2ctx(file); + + return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); +} + +static int m2mtest_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct m2mtest_dev *dev = video_drvdata(file); + struct m2mtest_ctx *ctx = file2ctx(file); + int res; + + if (mutex_lock_interruptible(&dev->dev_mutex)) + return -ERESTARTSYS; + res = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&dev->dev_mutex); + return res; +} + +static const struct v4l2_file_operations m2mtest_fops = { + .owner = THIS_MODULE, + .open = m2mtest_open, + .release = m2mtest_release, + .poll = m2mtest_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = m2mtest_mmap, +}; + +static struct video_device m2mtest_videodev = { + .name = MEM2MEM_NAME, + .vfl_dir = VFL_DIR_M2M, + .fops = &m2mtest_fops, + .ioctl_ops = &m2mtest_ioctl_ops, + .minor = -1, + .release = video_device_release, +}; + +static struct v4l2_m2m_ops m2m_ops = { + .device_run = device_run, + .job_ready = job_ready, + .job_abort = job_abort, + .lock = m2mtest_lock, + .unlock = m2mtest_unlock, +}; + +static int m2mtest_probe(struct platform_device *pdev) +{ + struct m2mtest_dev *dev; + struct video_device *vfd; + int ret; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + spin_lock_init(&dev->irqlock); + + ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); + if (ret) + return ret; + + atomic_set(&dev->num_inst, 0); + mutex_init(&dev->dev_mutex); + + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto unreg_dev; + } + + *vfd = m2mtest_videodev; + vfd->lock = &dev->dev_mutex; + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); + goto rel_vdev; + } + + video_set_drvdata(vfd, dev); + snprintf(vfd->name, sizeof(vfd->name), "%s", m2mtest_videodev.name); + dev->vfd = vfd; + v4l2_info(&dev->v4l2_dev, MEM2MEM_TEST_MODULE_NAME + "Device registered as /dev/video%d\n", vfd->num); + + setup_timer(&dev->timer, device_isr, (long)dev); + platform_set_drvdata(pdev, dev); + + dev->m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(dev->m2m_dev)) { + v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(dev->m2m_dev); + goto err_m2m; + } + + return 0; + +err_m2m: + v4l2_m2m_release(dev->m2m_dev); + video_unregister_device(dev->vfd); +rel_vdev: + video_device_release(vfd); +unreg_dev: + v4l2_device_unregister(&dev->v4l2_dev); + + return ret; +} + +static int m2mtest_remove(struct platform_device *pdev) +{ + struct m2mtest_dev *dev = + (struct m2mtest_dev *)platform_get_drvdata(pdev); + + v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_TEST_MODULE_NAME); + v4l2_m2m_release(dev->m2m_dev); + del_timer_sync(&dev->timer); + video_unregister_device(dev->vfd); + v4l2_device_unregister(&dev->v4l2_dev); + + return 0; +} + +static struct platform_driver m2mtest_pdrv = { + .probe = m2mtest_probe, + .remove = m2mtest_remove, + .driver = { + .name = MEM2MEM_NAME, + .owner = THIS_MODULE, + }, +}; + +static void __exit m2mtest_exit(void) +{ + platform_driver_unregister(&m2mtest_pdrv); + platform_device_unregister(&m2mtest_pdev); +} + +static int __init m2mtest_init(void) +{ + int ret; + + ret = platform_device_register(&m2mtest_pdev); + if (ret) + return ret; + + ret = platform_driver_register(&m2mtest_pdrv); + if (ret) + platform_device_unregister(&m2mtest_pdev); + + return 0; +} + +module_init(m2mtest_init); +module_exit(m2mtest_exit); + diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c new file mode 100644 index 00000000..f7440e58 --- /dev/null +++ b/drivers/media/platform/mx2_emmaprp.c @@ -0,0 +1,1021 @@ +/* + * Support eMMa-PrP through mem2mem framework. + * + * eMMa-PrP is a piece of HW that allows fetching buffers + * from one memory location and do several operations on + * them such as scaling or format conversion giving, as a result + * a new processed buffer in another memory location. + * + * Based on mem2mem_testdev.c by Pawel Osciak. + * + * Copyright (c) 2011 Vista Silicon S.L. + * Javier Martin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define EMMAPRP_MODULE_NAME "mem2mem-emmaprp" + +MODULE_DESCRIPTION("Mem-to-mem device which supports eMMa-PrP present in mx2 SoCs"); +MODULE_AUTHOR("Javier Martin v4l2_dev, "%s: " fmt, __func__, ## arg) + +/* EMMA PrP */ +#define PRP_CNTL 0x00 +#define PRP_INTR_CNTL 0x04 +#define PRP_INTRSTATUS 0x08 +#define PRP_SOURCE_Y_PTR 0x0c +#define PRP_SOURCE_CB_PTR 0x10 +#define PRP_SOURCE_CR_PTR 0x14 +#define PRP_DEST_RGB1_PTR 0x18 +#define PRP_DEST_RGB2_PTR 0x1c +#define PRP_DEST_Y_PTR 0x20 +#define PRP_DEST_CB_PTR 0x24 +#define PRP_DEST_CR_PTR 0x28 +#define PRP_SRC_FRAME_SIZE 0x2c +#define PRP_DEST_CH1_LINE_STRIDE 0x30 +#define PRP_SRC_PIXEL_FORMAT_CNTL 0x34 +#define PRP_CH1_PIXEL_FORMAT_CNTL 0x38 +#define PRP_CH1_OUT_IMAGE_SIZE 0x3c +#define PRP_CH2_OUT_IMAGE_SIZE 0x40 +#define PRP_SRC_LINE_STRIDE 0x44 +#define PRP_CSC_COEF_012 0x48 +#define PRP_CSC_COEF_345 0x4c +#define PRP_CSC_COEF_678 0x50 +#define PRP_CH1_RZ_HORI_COEF1 0x54 +#define PRP_CH1_RZ_HORI_COEF2 0x58 +#define PRP_CH1_RZ_HORI_VALID 0x5c +#define PRP_CH1_RZ_VERT_COEF1 0x60 +#define PRP_CH1_RZ_VERT_COEF2 0x64 +#define PRP_CH1_RZ_VERT_VALID 0x68 +#define PRP_CH2_RZ_HORI_COEF1 0x6c +#define PRP_CH2_RZ_HORI_COEF2 0x70 +#define PRP_CH2_RZ_HORI_VALID 0x74 +#define PRP_CH2_RZ_VERT_COEF1 0x78 +#define PRP_CH2_RZ_VERT_COEF2 0x7c +#define PRP_CH2_RZ_VERT_VALID 0x80 + +#define PRP_CNTL_CH1EN (1 << 0) +#define PRP_CNTL_CH2EN (1 << 1) +#define PRP_CNTL_CSIEN (1 << 2) +#define PRP_CNTL_DATA_IN_YUV420 (0 << 3) +#define PRP_CNTL_DATA_IN_YUV422 (1 << 3) +#define PRP_CNTL_DATA_IN_RGB16 (2 << 3) +#define PRP_CNTL_DATA_IN_RGB32 (3 << 3) +#define PRP_CNTL_CH1_OUT_RGB8 (0 << 5) +#define PRP_CNTL_CH1_OUT_RGB16 (1 << 5) +#define PRP_CNTL_CH1_OUT_RGB32 (2 << 5) +#define PRP_CNTL_CH1_OUT_YUV422 (3 << 5) +#define PRP_CNTL_CH2_OUT_YUV420 (0 << 7) +#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7) +#define PRP_CNTL_CH2_OUT_YUV444 (2 << 7) +#define PRP_CNTL_CH1_LEN (1 << 9) +#define PRP_CNTL_CH2_LEN (1 << 10) +#define PRP_CNTL_SKIP_FRAME (1 << 11) +#define PRP_CNTL_SWRST (1 << 12) +#define PRP_CNTL_CLKEN (1 << 13) +#define PRP_CNTL_WEN (1 << 14) +#define PRP_CNTL_CH1BYP (1 << 15) +#define PRP_CNTL_IN_TSKIP(x) ((x) << 16) +#define PRP_CNTL_CH1_TSKIP(x) ((x) << 19) +#define PRP_CNTL_CH2_TSKIP(x) ((x) << 22) +#define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25) +#define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27) +#define PRP_CNTL_CH2B1EN (1 << 29) +#define PRP_CNTL_CH2B2EN (1 << 30) +#define PRP_CNTL_CH2FEN (1 << 31) + +#define PRP_SIZE_HEIGHT(x) (x) +#define PRP_SIZE_WIDTH(x) ((x) << 16) + +/* IRQ Enable and status register */ +#define PRP_INTR_RDERR (1 << 0) +#define PRP_INTR_CH1WERR (1 << 1) +#define PRP_INTR_CH2WERR (1 << 2) +#define PRP_INTR_CH1FC (1 << 3) +#define PRP_INTR_CH2FC (1 << 5) +#define PRP_INTR_LBOVF (1 << 7) +#define PRP_INTR_CH2OVF (1 << 8) + +#define PRP_INTR_ST_RDERR (1 << 0) +#define PRP_INTR_ST_CH1WERR (1 << 1) +#define PRP_INTR_ST_CH2WERR (1 << 2) +#define PRP_INTR_ST_CH2B2CI (1 << 3) +#define PRP_INTR_ST_CH2B1CI (1 << 4) +#define PRP_INTR_ST_CH1B2CI (1 << 5) +#define PRP_INTR_ST_CH1B1CI (1 << 6) +#define PRP_INTR_ST_LBOVF (1 << 7) +#define PRP_INTR_ST_CH2OVF (1 << 8) + +struct emmaprp_fmt { + char *name; + u32 fourcc; + /* Types the format can be used for */ + u32 types; +}; + +static struct emmaprp_fmt formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .types = MEM2MEM_CAPTURE, + }, + { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .types = MEM2MEM_OUTPUT, + }, +}; + +/* Per-queue, driver-specific private data */ +struct emmaprp_q_data { + unsigned int width; + unsigned int height; + unsigned int sizeimage; + struct emmaprp_fmt *fmt; +}; + +enum { + V4L2_M2M_SRC = 0, + V4L2_M2M_DST = 1, +}; + +#define NUM_FORMATS ARRAY_SIZE(formats) + +static struct emmaprp_fmt *find_format(struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + unsigned int k; + + for (k = 0; k < NUM_FORMATS; k++) { + fmt = &formats[k]; + if (fmt->fourcc == f->fmt.pix.pixelformat) + break; + } + + if (k == NUM_FORMATS) + return NULL; + + return &formats[k]; +} + +struct emmaprp_dev { + struct v4l2_device v4l2_dev; + struct video_device *vfd; + + struct mutex dev_mutex; + spinlock_t irqlock; + + int irq_emma; + void __iomem *base_emma; + struct clk *clk_emma_ahb, *clk_emma_ipg; + struct resource *res_emma; + + struct v4l2_m2m_dev *m2m_dev; + struct vb2_alloc_ctx *alloc_ctx; +}; + +struct emmaprp_ctx { + struct emmaprp_dev *dev; + /* Abort requested by m2m */ + int aborting; + struct emmaprp_q_data q_data[2]; + struct v4l2_m2m_ctx *m2m_ctx; +}; + +static struct emmaprp_q_data *get_q_data(struct emmaprp_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &(ctx->q_data[V4L2_M2M_SRC]); + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &(ctx->q_data[V4L2_M2M_DST]); + default: + BUG(); + } + return NULL; +} + +/* + * mem2mem callbacks + */ +static void emmaprp_job_abort(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + + ctx->aborting = 1; + + dprintk(pcdev, "Aborting task\n"); + + v4l2_m2m_job_finish(pcdev->m2m_dev, ctx->m2m_ctx); +} + +static void emmaprp_lock(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + mutex_lock(&pcdev->dev_mutex); +} + +static void emmaprp_unlock(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + mutex_unlock(&pcdev->dev_mutex); +} + +static inline void emmaprp_dump_regs(struct emmaprp_dev *pcdev) +{ + dprintk(pcdev, + "eMMa-PrP Registers:\n" + " SOURCE_Y_PTR = 0x%08X\n" + " SRC_FRAME_SIZE = 0x%08X\n" + " DEST_Y_PTR = 0x%08X\n" + " DEST_CR_PTR = 0x%08X\n" + " DEST_CB_PTR = 0x%08X\n" + " CH2_OUT_IMAGE_SIZE = 0x%08X\n" + " CNTL = 0x%08X\n", + readl(pcdev->base_emma + PRP_SOURCE_Y_PTR), + readl(pcdev->base_emma + PRP_SRC_FRAME_SIZE), + readl(pcdev->base_emma + PRP_DEST_Y_PTR), + readl(pcdev->base_emma + PRP_DEST_CR_PTR), + readl(pcdev->base_emma + PRP_DEST_CB_PTR), + readl(pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE), + readl(pcdev->base_emma + PRP_CNTL)); +} + +static void emmaprp_device_run(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_q_data *s_q_data, *d_q_data; + struct vb2_buffer *src_buf, *dst_buf; + struct emmaprp_dev *pcdev = ctx->dev; + unsigned int s_width, s_height; + unsigned int d_width, d_height; + unsigned int d_size; + dma_addr_t p_in, p_out; + u32 tmp; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + + s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + s_width = s_q_data->width; + s_height = s_q_data->height; + + d_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + d_width = d_q_data->width; + d_height = d_q_data->height; + d_size = d_width * d_height; + + p_in = vb2_dma_contig_plane_dma_addr(src_buf, 0); + p_out = vb2_dma_contig_plane_dma_addr(dst_buf, 0); + if (!p_in || !p_out) { + v4l2_err(&pcdev->v4l2_dev, + "Acquiring kernel pointers to buffers failed\n"); + return; + } + + /* Input frame parameters */ + writel(p_in, pcdev->base_emma + PRP_SOURCE_Y_PTR); + writel(PRP_SIZE_WIDTH(s_width) | PRP_SIZE_HEIGHT(s_height), + pcdev->base_emma + PRP_SRC_FRAME_SIZE); + + /* Output frame parameters */ + writel(p_out, pcdev->base_emma + PRP_DEST_Y_PTR); + writel(p_out + d_size, pcdev->base_emma + PRP_DEST_CB_PTR); + writel(p_out + d_size + (d_size >> 2), + pcdev->base_emma + PRP_DEST_CR_PTR); + writel(PRP_SIZE_WIDTH(d_width) | PRP_SIZE_HEIGHT(d_height), + pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE); + + /* IRQ configuration */ + tmp = readl(pcdev->base_emma + PRP_INTR_CNTL); + writel(tmp | PRP_INTR_RDERR | + PRP_INTR_CH2WERR | + PRP_INTR_CH2FC, + pcdev->base_emma + PRP_INTR_CNTL); + + emmaprp_dump_regs(pcdev); + + /* Enable transfer */ + tmp = readl(pcdev->base_emma + PRP_CNTL); + writel(tmp | PRP_CNTL_CH2_OUT_YUV420 | + PRP_CNTL_DATA_IN_YUV422 | + PRP_CNTL_CH2EN, + pcdev->base_emma + PRP_CNTL); +} + +static irqreturn_t emmaprp_irq(int irq_emma, void *data) +{ + struct emmaprp_dev *pcdev = data; + struct emmaprp_ctx *curr_ctx; + struct vb2_buffer *src_vb, *dst_vb; + unsigned long flags; + u32 irqst; + + /* Check irq flags and clear irq */ + irqst = readl(pcdev->base_emma + PRP_INTRSTATUS); + writel(irqst, pcdev->base_emma + PRP_INTRSTATUS); + dprintk(pcdev, "irqst = 0x%08x\n", irqst); + + curr_ctx = v4l2_m2m_get_curr_priv(pcdev->m2m_dev); + if (curr_ctx == NULL) { + pr_err("Instance released before the end of transaction\n"); + return IRQ_HANDLED; + } + + if (!curr_ctx->aborting) { + if ((irqst & PRP_INTR_ST_RDERR) || + (irqst & PRP_INTR_ST_CH2WERR)) { + pr_err("PrP bus error occurred, this transfer is probably corrupted\n"); + writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); + } else if (irqst & PRP_INTR_ST_CH2B1CI) { /* buffer ready */ + src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->m2m_ctx); + + src_vb->v4l2_buf.timestamp = dst_vb->v4l2_buf.timestamp; + src_vb->v4l2_buf.timecode = dst_vb->v4l2_buf.timecode; + + spin_lock_irqsave(&pcdev->irqlock, flags); + v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE); + spin_unlock_irqrestore(&pcdev->irqlock, flags); + } + } + + v4l2_m2m_job_finish(pcdev->m2m_dev, curr_ctx->m2m_ctx); + return IRQ_HANDLED; +} + +/* + * video ioctls + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); + strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); + /* + * This is only a mem-to-mem video device. The capture and output + * device capability flags are left only for backward compatibility + * and are scheduled for removal. + */ + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | + V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; + return 0; +} + +static int enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + int i, num; + struct emmaprp_fmt *fmt; + + num = 0; + + for (i = 0; i < NUM_FORMATS; ++i) { + if (formats[i].types & type) { + /* index-th format of type type found ? */ + if (num == f->index) + break; + /* Correct type but haven't reached our index yet, + * just increment per-type index */ + ++num; + } + } + + if (i < NUM_FORMATS) { + /* Format found */ + fmt = &formats[i]; + strlcpy(f->description, fmt->name, sizeof(f->description) - 1); + f->pixelformat = fmt->fourcc; + return 0; + } + + /* Format not found */ + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_CAPTURE); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_OUTPUT); +} + +static int vidioc_g_fmt(struct emmaprp_ctx *ctx, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct emmaprp_q_data *q_data; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + + f->fmt.pix.width = q_data->width; + f->fmt.pix.height = q_data->height; + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.pixelformat = q_data->fmt->fourcc; + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) + f->fmt.pix.bytesperline = q_data->width * 3 / 2; + else /* YUYV */ + f->fmt.pix.bytesperline = q_data->width * 2; + f->fmt.pix.sizeimage = q_data->sizeimage; + + return 0; +} + +static int vidioc_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_try_fmt(struct v4l2_format *f) +{ + enum v4l2_field field; + + + if (!find_format(f)) + return -EINVAL; + + field = f->fmt.pix.field; + if (field == V4L2_FIELD_ANY) + field = V4L2_FIELD_NONE; + else if (V4L2_FIELD_NONE != field) + return -EINVAL; + + /* V4L2 specification suggests the driver corrects the format struct + * if any of the dimensions is unsupported */ + f->fmt.pix.field = field; + + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) { + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, + W_ALIGN_YUV420, &f->fmt.pix.height, + MIN_H, MAX_H, H_ALIGN, S_ALIGN); + f->fmt.pix.bytesperline = f->fmt.pix.width * 3 / 2; + } else { + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, + W_ALIGN_OTHERS, &f->fmt.pix.height, + MIN_H, MAX_H, H_ALIGN, S_ALIGN); + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + } + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + struct emmaprp_ctx *ctx = priv; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_CAPTURE)) { + v4l2_err(&ctx->dev->v4l2_dev, + "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + return vidioc_try_fmt(f); +} + +static int vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + struct emmaprp_ctx *ctx = priv; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_OUTPUT)) { + v4l2_err(&ctx->dev->v4l2_dev, + "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + return vidioc_try_fmt(f); +} + +static int vidioc_s_fmt(struct emmaprp_ctx *ctx, struct v4l2_format *f) +{ + struct emmaprp_q_data *q_data; + struct vb2_queue *vq; + int ret; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + if (!q_data) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + ret = vidioc_try_fmt(f); + if (ret) + return ret; + + q_data->fmt = find_format(f); + q_data->width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; + if (q_data->fmt->fourcc == V4L2_PIX_FMT_YUV420) + q_data->sizeimage = q_data->width * q_data->height * 3 / 2; + else /* YUYV */ + q_data->sizeimage = q_data->width * q_data->height * 2; + + dprintk(ctx->dev, + "Setting format for type %d, wxh: %dx%d, fmt: %d\n", + f->type, q_data->width, q_data->height, q_data->fmt->fourcc); + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(priv, f); +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(priv, f); +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static const struct v4l2_ioctl_ops emmaprp_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, + .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + + +/* + * Queue operations + */ +static int emmaprp_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vq); + struct emmaprp_q_data *q_data; + unsigned int size, count = *nbuffers; + + q_data = get_q_data(ctx, vq->type); + + if (q_data->fmt->fourcc == V4L2_PIX_FMT_YUV420) + size = q_data->width * q_data->height * 3 / 2; + else + size = q_data->width * q_data->height * 2; + + while (size * count > MEM2MEM_VID_MEM_LIMIT) + (count)--; + + *nplanes = 1; + *nbuffers = count; + sizes[0] = size; + + alloc_ctxs[0] = ctx->dev->alloc_ctx; + + dprintk(ctx->dev, "get %d buffer(s) of size %d each.\n", count, size); + + return 0; +} + +static int emmaprp_buf_prepare(struct vb2_buffer *vb) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct emmaprp_q_data *q_data; + + dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); + + q_data = get_q_data(ctx, vb->vb2_queue->type); + + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + dprintk(ctx->dev, "%s data will not fit into plane" + "(%lu < %lu)\n", __func__, + vb2_plane_size(vb, 0), + (long)q_data->sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + + return 0; +} + +static void emmaprp_buf_queue(struct vb2_buffer *vb) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static struct vb2_ops emmaprp_qops = { + .queue_setup = emmaprp_queue_setup, + .buf_prepare = emmaprp_buf_prepare, + .buf_queue = emmaprp_buf_queue, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct emmaprp_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &emmaprp_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &emmaprp_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY; + + return vb2_queue_init(dst_vq); +} + +/* + * File operations + */ +static int emmaprp_open(struct file *file) +{ + struct emmaprp_dev *pcdev = video_drvdata(file); + struct emmaprp_ctx *ctx; + + ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + file->private_data = ctx; + ctx->dev = pcdev; + + if (mutex_lock_interruptible(&pcdev->dev_mutex)) { + kfree(ctx); + return -ERESTARTSYS; + } + + ctx->m2m_ctx = v4l2_m2m_ctx_init(pcdev->m2m_dev, ctx, &queue_init); + + if (IS_ERR(ctx->m2m_ctx)) { + int ret = PTR_ERR(ctx->m2m_ctx); + + mutex_unlock(&pcdev->dev_mutex); + kfree(ctx); + return ret; + } + + clk_prepare_enable(pcdev->clk_emma_ipg); + clk_prepare_enable(pcdev->clk_emma_ahb); + ctx->q_data[V4L2_M2M_SRC].fmt = &formats[1]; + ctx->q_data[V4L2_M2M_DST].fmt = &formats[0]; + mutex_unlock(&pcdev->dev_mutex); + + dprintk(pcdev, "Created instance %p, m2m_ctx: %p\n", ctx, ctx->m2m_ctx); + + return 0; +} + +static int emmaprp_release(struct file *file) +{ + struct emmaprp_dev *pcdev = video_drvdata(file); + struct emmaprp_ctx *ctx = file->private_data; + + dprintk(pcdev, "Releasing instance %p\n", ctx); + + mutex_lock(&pcdev->dev_mutex); + clk_disable_unprepare(pcdev->clk_emma_ahb); + clk_disable_unprepare(pcdev->clk_emma_ipg); + v4l2_m2m_ctx_release(ctx->m2m_ctx); + mutex_unlock(&pcdev->dev_mutex); + kfree(ctx); + + return 0; +} + +static unsigned int emmaprp_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct emmaprp_dev *pcdev = video_drvdata(file); + struct emmaprp_ctx *ctx = file->private_data; + unsigned int res; + + mutex_lock(&pcdev->dev_mutex); + res = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_unlock(&pcdev->dev_mutex); + return res; +} + +static int emmaprp_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct emmaprp_dev *pcdev = video_drvdata(file); + struct emmaprp_ctx *ctx = file->private_data; + int ret; + + if (mutex_lock_interruptible(&pcdev->dev_mutex)) + return -ERESTARTSYS; + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&pcdev->dev_mutex); + return ret; +} + +static const struct v4l2_file_operations emmaprp_fops = { + .owner = THIS_MODULE, + .open = emmaprp_open, + .release = emmaprp_release, + .poll = emmaprp_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = emmaprp_mmap, +}; + +static struct video_device emmaprp_videodev = { + .name = MEM2MEM_NAME, + .fops = &emmaprp_fops, + .ioctl_ops = &emmaprp_ioctl_ops, + .minor = -1, + .release = video_device_release, + .vfl_dir = VFL_DIR_M2M, +}; + +static struct v4l2_m2m_ops m2m_ops = { + .device_run = emmaprp_device_run, + .job_abort = emmaprp_job_abort, + .lock = emmaprp_lock, + .unlock = emmaprp_unlock, +}; + +static int emmaprp_probe(struct platform_device *pdev) +{ + struct emmaprp_dev *pcdev; + struct video_device *vfd; + struct resource *res_emma; + int irq_emma; + int ret; + + pcdev = devm_kzalloc(&pdev->dev, sizeof(*pcdev), GFP_KERNEL); + if (!pcdev) + return -ENOMEM; + + spin_lock_init(&pcdev->irqlock); + + pcdev->clk_emma_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(pcdev->clk_emma_ipg)) { + return PTR_ERR(pcdev->clk_emma_ipg); + } + + pcdev->clk_emma_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(pcdev->clk_emma_ahb)) + return PTR_ERR(pcdev->clk_emma_ahb); + + irq_emma = platform_get_irq(pdev, 0); + res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (irq_emma < 0 || res_emma == NULL) { + dev_err(&pdev->dev, "Missing platform resources data\n"); + return -ENODEV; + } + + ret = v4l2_device_register(&pdev->dev, &pcdev->v4l2_dev); + if (ret) + return ret; + + mutex_init(&pcdev->dev_mutex); + + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&pcdev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto unreg_dev; + } + + *vfd = emmaprp_videodev; + vfd->lock = &pcdev->dev_mutex; + + video_set_drvdata(vfd, pcdev); + snprintf(vfd->name, sizeof(vfd->name), "%s", emmaprp_videodev.name); + pcdev->vfd = vfd; + v4l2_info(&pcdev->v4l2_dev, EMMAPRP_MODULE_NAME + " Device registered as /dev/video%d\n", vfd->num); + + platform_set_drvdata(pdev, pcdev); + + pcdev->base_emma = devm_ioremap_resource(&pdev->dev, res_emma); + if (IS_ERR(pcdev->base_emma)) { + ret = PTR_ERR(pcdev->base_emma); + goto rel_vdev; + } + + pcdev->irq_emma = irq_emma; + pcdev->res_emma = res_emma; + + if (devm_request_irq(&pdev->dev, pcdev->irq_emma, emmaprp_irq, + 0, MEM2MEM_NAME, pcdev) < 0) { + ret = -ENODEV; + goto rel_vdev; + } + + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to alloc vb2 context\n"); + ret = PTR_ERR(pcdev->alloc_ctx); + goto rel_vdev; + } + + pcdev->m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(pcdev->m2m_dev)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(pcdev->m2m_dev); + goto rel_ctx; + } + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&pcdev->v4l2_dev, "Failed to register video device\n"); + goto rel_m2m; + } + + return 0; + + +rel_m2m: + v4l2_m2m_release(pcdev->m2m_dev); +rel_ctx: + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); +rel_vdev: + video_device_release(vfd); +unreg_dev: + v4l2_device_unregister(&pcdev->v4l2_dev); + + return ret; +} + +static int emmaprp_remove(struct platform_device *pdev) +{ + struct emmaprp_dev *pcdev = platform_get_drvdata(pdev); + + v4l2_info(&pcdev->v4l2_dev, "Removing " EMMAPRP_MODULE_NAME); + + video_unregister_device(pcdev->vfd); + v4l2_m2m_release(pcdev->m2m_dev); + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); + v4l2_device_unregister(&pcdev->v4l2_dev); + + return 0; +} + +static struct platform_driver emmaprp_pdrv = { + .probe = emmaprp_probe, + .remove = emmaprp_remove, + .driver = { + .name = MEM2MEM_NAME, + .owner = THIS_MODULE, + }, +}; +module_platform_driver(emmaprp_pdrv); diff --git a/drivers/media/platform/omap/Kconfig b/drivers/media/platform/omap/Kconfig new file mode 100644 index 00000000..37ad446b --- /dev/null +++ b/drivers/media/platform/omap/Kconfig @@ -0,0 +1,14 @@ +config VIDEO_OMAP2_VOUT_VRFB + bool + +config VIDEO_OMAP2_VOUT + tristate "OMAP2/OMAP3 V4L2-Display driver" + depends on ARCH_OMAP2 || ARCH_OMAP3 + select VIDEOBUF_GEN + select VIDEOBUF_DMA_CONTIG + select OMAP2_DSS if HAS_IOMEM && ARCH_OMAP2PLUS + select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3 + select VIDEO_OMAP2_VOUT_VRFB if VIDEO_OMAP2_VOUT && OMAP2_VRFB + default n + ---help--- + V4L2 Display driver support for OMAP2/3 based boards. diff --git a/drivers/media/platform/omap/Makefile b/drivers/media/platform/omap/Makefile new file mode 100644 index 00000000..d80df41f --- /dev/null +++ b/drivers/media/platform/omap/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the omap video device drivers. +# + +# OMAP2/3 Display driver +omap-vout-y += omap_vout.o omap_voutlib.o +omap-vout-$(CONFIG_VIDEO_OMAP2_VOUT_VRFB) += omap_vout_vrfb.o +obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c new file mode 100644 index 00000000..d338b19d --- /dev/null +++ b/drivers/media/platform/omap/omap_vout.c @@ -0,0 +1,2294 @@ +/* + * omap_vout.c + * + * Copyright (C) 2005-2010 Texas Instruments. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + * Leveraged code from the OMAP2 camera driver + * Video-for-Linux (Version 2) camera capture driver for + * the OMAP24xx camera controller. + * + * Author: Andy Lowe (source@mvista.com) + * + * Copyright (C) 2004 MontaVista Software, Inc. + * Copyright (C) 2010 Texas Instruments. + * + * History: + * 20-APR-2006 Khasim Modified VRFB based Rotation, + * The image data is always read from 0 degree + * view and written + * to the virtual space of desired rotation angle + * 4-DEC-2006 Jian Changed to support better memory management + * + * 17-Nov-2008 Hardik Changed driver to use video_ioctl2 + * + * 23-Feb-2010 Vaibhav H Modified to use new DSS2 interface + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include